Sample records for beam dynamics workshop

  1. Beam Dynamics for ARIA

    E-Print Network [OSTI]

    Ekdahl, Carl

    2015-01-01T23:59:59.000Z

    Beam dynamics issues are assessed for a new linear induction electron accelerator being designed for flash radiography of large explosively driven hydrodynamic experiments. Special attention is paid to equilibrium beam transport, possible emittance growth, and beam stability. It is concluded that a radiographic quality beam will be produced possible if engineering standards and construction details are equivalent to those on the present radiography accelerators at Los Alamos.

  2. Summary of the LARP Mini-Workshop on Beam-Beam Compensation 2007

    SciTech Connect (OSTI)

    Fischer, Wolfram; /Brookhaven; Bruning, Oliver S.; Koutchouk, J.P.; Zimmermann, F.; /CERN; Sen, T.; Shiltsev, V.; /Fermilab; Ohmi, K.; /KEK, Tsukuba; Furman, M.; /LBL, Berkeley; Cai, Y.; Chao, A.; /SLAC

    2011-11-07T23:59:59.000Z

    The LARP Mini-Workshop on Beam-Beam Compensation 2007 was held at SLAC, 2-4 July 2007. It was attended by 33 participants from 10 institutions in Asia, Europe, and America. 26 presentations were given, while more than one third of the time was allocated to discussions. The workshop web site is Ref. [1]. The workshop's main focus was on long-range and head-on beam-beam compensation, with a view towards application in the LHC. Other topics included the beam-beam performance of previous, existing and future circular colliders; beam-beam simulations; new operating modes, theory, and unexplained phenomena. This summary is also published as Ref. [2].

  3. Dynamic defense workshop : from research to practice.

    SciTech Connect (OSTI)

    Crosby, Sean Michael; Doak, Justin E.; Haas, Jason J.; Helinski, Ryan; Lamb, Christopher C.

    2013-02-01T23:59:59.000Z

    On September 5th and 6th, 2012, the Dynamic Defense Workshop: From Research to Practice brought together researchers from academia, industry, and Sandia with the goals of increasing collaboration between Sandia National Laboratories and external organizations, de ning and un- derstanding dynamic, or moving target, defense concepts and directions, and gaining a greater understanding of the state of the art for dynamic defense. Through the workshop, we broadened and re ned our de nition and understanding, identi ed new approaches to inherent challenges, and de ned principles of dynamic defense. Half of the workshop was devoted to presentations of current state-of-the-art work. Presentation topics included areas such as the failure of current defenses, threats, techniques, goals of dynamic defense, theory, foundations of dynamic defense, future directions and open research questions related to dynamic defense. The remainder of the workshop was discussion, which was broken down into sessions on de ning challenges, applications to host or mobile environments, applications to enterprise network environments, exploring research and operational taxonomies, and determining how to apply scienti c rigor to and investigating the eld of dynamic defense.

  4. ICFA Beam Dynamics Newsletter

    SciTech Connect (OSTI)

    Ben-Zvi I.; Kuczewski A.; Altinbas, Z.; Beavis, D.; Belomestnykh,; Dai, J. et al

    2012-07-01T23:59:59.000Z

    The Collider-Accelerator Department at Brookhaven National Laboratory is building a high-brightness 500 mA capable Energy Recovery Linac (ERL) as one of its main R&D thrusts towards eRHIC, the polarized electron - hadron collider as an upgrade of the operating RHIC facility. The ERL is in final assembly stages, with injection commisioning starting in October 2012. The objective of this ERL is to serve as a platform for R&D into high current ERL, in particular issues of halo generation and control, Higher-Order Mode (HOM) issues, coherent emissions for the beam and high-brightness, high-power beam generation and preservation. The R&D ERL features a superconducting laser-photocathode RF gun with a high quantum efficiency photoccathode served with a load-lock cathode delivery system, a highly damped 5-cell accelerating cavity, a highly flexible single-pass loop and a comprehensive system of beam instrumentation. In this ICFA Beam Dynamics Newsletter article we will describe the ERL in a degree of detail that is not usually found in regular publications. We will discuss the various systems of the ERL, following the electrons from the photocathode to the beam dump, cover the control system, machine protection etc and summarize with the status of the ERL systems.

  5. Turbine bearings and rotor dynamics workshop: proceedings

    SciTech Connect (OSTI)

    Brown, R.G.; Quilliam, J.F. (eds.)

    1985-06-01T23:59:59.000Z

    An EPRI workshop to address turbine bearing reliability improvement and rotor dynamics was co-hosted by Detroit Edison in Dearborn, Michigan on September 8-10, 1982. The 136 attendees represented a broad spectrum of US utilities, equipment manufacturers, and consultants, as well as representatives from England, Japan, and Switzerland. These proceedings contain the text of the formal presentations as well as summaries of the working group sessions which were devoted to topics of particular interest to the workshop participants. Formal presentations were organized under the following general session titles: utility experience and advancements in turbine bearing and lubrication systems; recent advancements in turbine bearing and lubrication systems; utility experience and advancements in turbine-generator rotor dynamics; and recent advancements in turbine-generator rotor dynamics. In addition to the technical presentations, working group sessions were held on selected topics relevant to turbine bearing reliability improvement and rotor dynamics. These groups provided a forum for engineers to exchange ideas and information in a less formal environment. The discussions provided attendees with an opportunity to discuss key issues in more detail and address subjects not covered in the formal presentations. The subjects of these working groups were: rotor dynamic analysis and problem solving; vibration signature analysis and field balancing; oil contamination monitoring and control; and operation and maintenance practices. Individual papers have been entered individually into EDB and ERA.

  6. Proceedings of the workshop on prospects for research with radioactive beams from heavy ion accelerators

    SciTech Connect (OSTI)

    Nitschke, J.M. (ed.)

    1984-04-01T23:59:59.000Z

    The SuperHILAC Users Executive Committee organized a workshop on Prospects for Research with Radioactive Beams from Heavy Ion Accelerators. The main purpose of the workshop was to bring together a diverse group of scientists who had already done experients with radioactive beams or were interested in their use in the future. The topics of the talks ranged from general nuclear physics, astrophysics, production of radioactive beams and high energy projectile fragmentation to biomedical applications. This publication contains the abstracts of the talks given at the workshop and copies of the viewgraphs as they were supplied to the editor.

  7. Beam Dynamics for Induction Accelerators

    E-Print Network [OSTI]

    Lee, E.P.

    2014-01-01T23:59:59.000Z

    Dynamics for Induction Accelerators Edward P. Lee Lawrencea natural candidate accelerator for a heavy ion fusion (HIF)words: Fusion, Induction, Accelerators, Dynamics This work

  8. Workshop Summary: The Dynamics, Structure and History of Galaxies

    E-Print Network [OSTI]

    J. Bland-Hawthorn

    2002-05-30T23:59:59.000Z

    In July/August last year, a group of 50 galactic astronomers convened at Dunk Island, Australia to celebrate Prof. Ken Freeman's 60th birthday. The overarching theme of the meeting reflected Ken's wish to understand ``the chain of events that occurred during the formation of the Galaxy", to quote from his Annual Reviews article in 1987. The workshop was divided into four parts: galaxy structure and dynamics, haloes and environments, HI and dark matter, galaxy formation and evolution.

  9. Proceedings of the workshop on the science of intense radioactive ion beams

    SciTech Connect (OSTI)

    McClelland, J.B.; Vieira, D.J. (comps.)

    1990-10-01T23:59:59.000Z

    This report contains the proceedings of a 2-1/2 day workshop on the Science of Intense Radioactive Ion Beams which was held at the Los Alamos National Laboratory on April 10--12, 1990. The workshop was attended by 105 people, representing 30 institutions from 10 countries. The thrust of the workshop was to develop the scientific opportunities which become possible with a new generation intense Radioactive Ion Beam (RIB) facility, currently being discussed within North America. The workshop was organized around five primary topics: (1) reaction physics; (2) nuclei far from stability/nuclear structure; (3) nuclear astrophysics; (4) atomic physics, material science, and applied research; and (5) facilities. Overview talks were presented on each of these topics, followed by 1-1/2 days of intense parallel working group sessions. The final half day of the workshop was devoted to the presentation and discussion of the working group summary reports, closing remarks and a discussion of future plans for this effort.

  10. Injected Beam Dynamics in SPEAR3

    SciTech Connect (OSTI)

    Corbett, Jeff; /SLAC; Fisher, Alan; /SLAC; Huang, Xiaobiao; /SLAC; Safranek, James; /SLAC; Westerman, Stuart; /SLAC; Cheng, Weixing; /Brookhaven; Mok, Walter; /Unlisted

    2012-06-21T23:59:59.000Z

    For the top-off operation it is important to understand the time evolution of charge injected into the storage ring. The large-amplitude horizontal oscillation quickly filaments and decoheres, and in some cases exhibits non-linear x-y coupling before damping to the stored orbit. Similarly, in the longitudinal dimension, any mismatch in beam arrival time, beam energy or phase-space results in damped, non-linear synchrotron oscillations. In this paper we report on measurements of injection beam dynamics in the transverse and longitudinal planes using turn-by-turn BPMs, a fast-gated, image-intensified CCD camera and a Hamamatsu C5680 streak camera.

  11. TRACKING CODE DEVELOPMENT FOR BEAM DYNAMICS OPTIMIZATION

    SciTech Connect (OSTI)

    Yang, L.

    2011-03-28T23:59:59.000Z

    Dynamic aperture (DA) optimization with direct particle tracking is a straight forward approach when the computing power is permitted. It can have various realistic errors included and is more close than theoretical estimations. In this approach, a fast and parallel tracking code could be very helpful. In this presentation, we describe an implementation of storage ring particle tracking code TESLA for beam dynamics optimization. It supports MPI based parallel computing and is robust as DA calculation engine. This code has been used in the NSLS-II dynamics optimizations and obtained promising performance.

  12. Beam Dynamics Challenges in High Energy Physics Accelerators!

    E-Print Network [OSTI]

    Beam Dynamics Challenges in High Energy Physics Accelerators! Alexander Valishev! University/1/2014!A. Valishev | Beam Dynamics Challenges in HEP Accelerators!2! #12;The Olympic Motto for Accelerators! 12/1/2014!A. Valishev | Beam Dynamics Challenges in HEP Accelerators!3! ENERGY INTENSITY BRIGHTNESS

  13. Molecular beam studies of reaction dynamics

    SciTech Connect (OSTI)

    Lee, Y.T.

    1987-03-01T23:59:59.000Z

    Purpose of this research project is two-fold: (1) to elucidate detailed dynamics of simple elementary reactions which are theoretically important and to unravel the mechanism of complex chemical reactions or photo chemical processes which play an important role in many macroscopic processes and (2) to determine the energetics of polyatomic free radicals using microscopic experimental methods. Most of the information is derived from measurement of the product fragment translational energy and angular distributions using unique molecular beam apparati designed for these purposes.

  14. Electron beam dynamics for the ISIS bremsstrahlung beam generation system

    E-Print Network [OSTI]

    Block, Robert E. (Robert Edward)

    2011-01-01T23:59:59.000Z

    An electron beam transport system was designed for use in the Bremsstrahlung Beam Generation System of the Integrated Stand-off Inspection System (ISIS). The purpose of this electron transport system was to provide for ...

  15. E-Print Network 3.0 - advanced beam dynamics Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    beam-beam interactions with large beam-beam parameter Summary: 1 . The dynamics of the beams could therefore be com- plicated by multimode oscillations of the beam... with...

  16. Dynamics of Snapping Beams and Jumping Poppers

    E-Print Network [OSTI]

    Anupam Pandey; Derek E. Moulton; Dominic Vella; Douglas P. Holmes

    2014-02-20T23:59:59.000Z

    We consider the dynamic snapping instability of elastic beams and shells. Using the Kirchhoff rod and F\\"{o}ppl-von K\\'{a}rm\\'{a}n plate equations, we study the stability, deformation modes, and snap-through dynamics of an elastic arch with clamped boundaries and subject to a concentrated load. For parameters typical of everyday and technological applications of snapping, we show that the stretchability of the arch plays a critical role in determining not only the post-buckling mode of deformation but also the timescale of snapping and the frequency of the arch's vibrations about its final equilibrium state. We show that the growth rate of the snap-through instability and its subsequent ringing frequency can both be interpreted physically as the result of a sound wave in the material propagating over a distance comparable to the length of the arch. Finally, we extend our analysis of the ringing frequency of indented arches to understand the `pop' heard when everted shell structures snap-through to their stable state. Remarkably, we find that not only are the scaling laws for the ringing frequencies in these two scenarios identical but also the respective prefactors are numerically close; this allows us to develop a master curve for the frequency of ringing in snapping beams and shells.

  17. COMPUTATIONAL STUDIES OF BEAM DYNAMICS IN THE ETA GUN

    E-Print Network [OSTI]

    Paul, A.C.

    2010-01-01T23:59:59.000Z

    OF BEAM DYNAMICS IN THE ETA GUN Arthur C. Paul, V. Kelvin10 cm at the end of the gun. A field equalizing electrode (

  18. X-Band Photoinjector Beam Dynamics

    SciTech Connect (OSTI)

    Zhou, Feng; /SLAC; Adolphsen, Chris; /SLAC; Ding, Yuantao; /SLAC; Li, Zenghai; /SLAC; Vlieks, Arnold; /SLAC

    2011-12-13T23:59:59.000Z

    SLAC is studying the feasibility of using an X-band RF photocathode gun to produce low emittance bunches for applications such as a mono-energetic MeV {gamma} ray source (in collaboration with LLNL) and a photoinjector for a compact FEL. Beam dynamics studies are being done for a configuration consisting of a 5.5-cell X-band gun followed by several 53-cell high-gradient X-band accelerator structures. A fully 3D program, ImpactT, is used to track particles taking into account space charge forces, short-range longitudinal and transverse wakefields, and the 3D rf fields in the structures, including the quadrupole component of the couplers. The effect of misalignments of the various elements, including the drive-laser, gun, solenoid and accelerator structures, are evaluated. This paper presents these results and estimates of the expected bunch emittance vs cathode gradient, and the effects of mixing between the fundamental and off-frequency longitudinal modes. An X-band gun at SLAC has been shown to operate reliably with a 200 MV/m acceleration gradient at the cathode, which is nearly twice the 115 MV/m acceleration gradient in the LCLS gun. The higher gradient should roughly balance the space charge related transverse emittance growth for the same bunch charge but provide a 3-4 times shorter bunch length. The shorter length would make the subsequent bunch compression easier and allow for a more effective use of emittance exchange. Such a gun can also be used with an X-band linac to produce a compact FEL or g ray source that would require rf sources of only one frequency for beam generation and acceleration. The feasibility of using an X-band rf photocathode gun and accelerator structures to generate high quality electron beams for compact FELs and g ray sources is being studied at SLAC. Results from the X-band photoinjector beam dynamics studies are reported in this paper.

  19. Gaussian beams in inhomogeneous anisotropic layered structures using dynamic

    E-Print Network [OSTI]

    Cerveny, Vlastislav

    Gaussian beams in inhomogeneous anisotropic layered structures using dynamic ray tracing 31 Praha 4, Czech Republic. E-mail: ip@ig.cas.cz. Summary Gaussian beams, approximate solutions coordinates. This 3 Ã? 3 matrix simplifies considerably the computation of Gaussian beams at any paraxial

  20. End to End Beam Dynamics of the ESS Linac

    E-Print Network [OSTI]

    Eshraqi, M; Celona, L; Comunian, M; Danared, H; Holm, A S; Møller, S P; Ponton, A; Stovall, J; Thomsen, H D

    2012-01-01T23:59:59.000Z

    The European Spallation Source, ESS, uses a linear accelerator to deliver the high intensity proton beam to the target station. The nominal beam power is 5 MW at an energy of 2.5 GeV. The individual accelerating structures in the linac and the transport lines are brie?y described, and the beam is tracked from the source throughout the linac to the target. This paper will present a review of the beam dynamics from the source to the target.

  1. Molecular beam studies of reaction dynamics

    SciTech Connect (OSTI)

    Lee, Y.T. [Lawrence Berkeley Laboratory, CA (United States)

    1993-12-01T23:59:59.000Z

    The major thrust of this research project is to elucidate detailed dynamics of simple elementary reactions that are theoretically important and to unravel the mechanism of complex chemical reactions or photochemical processes that play important roles in many macroscopic processes. Molecular beams of reactants are used to study individual reactive encounters between molecules or to monitor photodissociation events in a collision-free environment. Most of the information is derived from measurement of the product fragment energy, angular, and state distributions. Recent activities are centered on the mechanisms of elementary chemical reactions involving oxygen atoms with unsaturated hydrocarbons, the dynamics of endothermic substitution reactions, the dependence of the chemical reactivity of electronically excited atoms on the alignment of excited orbitals, the primary photochemical processes of polyatomic molecules, intramolecular energy transfer of chemically activated and locally excited molecules, the energetics of free radicals that are important to combustion processes, the infrared-absorption spectra of carbonium ions and hydrated hydronium ions, and bond-selective photodissociation through electric excitation.

  2. Molecular beam studies of reaction dynamics

    SciTech Connect (OSTI)

    Lee, Yuan T.

    1991-03-01T23:59:59.000Z

    The major thrust of this research project is to elucidate detailed dynamics of simple elementary reactions that are theoretically important and to unravel the mechanism of complex chemical reactions or photochemical processes that play important roles in many macroscopic processes. Molecular beams of reactants are used to study individual reactive encounters between molecules or to monitor photodissociation events in a collision-free environment. Most of the information is derived from measurement of the product fragment energy, angular, and state distributions. Recent activities are centered on the mechanisms of elementary chemical reactions involving oxygen atoms with unsaturated hydrocarbons, the dynamics of endothermic substitution reactions, the dependence of the chemical reactivity of electronically excited atoms on the alignment of excited orbitals, the primary photochemical processes of polyatomic molecules, intramolecular energy transfer of chemically activated and locally excited molecules, the energetics of free radicals that are important to combustion processes, the infrared-absorption spectra of carbonium ions and hydrated hydronium ions, and bond-selective photodissociation through electric excitation.

  3. Proceedings of the workshop on the production and use of intense radioactive beams at the Isospin Laboratory

    SciTech Connect (OSTI)

    Garrett, J.D. [ed.

    1992-12-31T23:59:59.000Z

    These proceedings report the deliberations of a 3 1/2 day workshop on the Production and Use of Intense Radioactive Ion Beams at the Isospin Laboratory, which was held at the Joint Institute for Heavy Ion Research in Oak Ridge, Tennessee, October 1992. The purpose of this workshop was not to duplicate the programs of other recent radioactive ion beam workshops or international conferences that have focused on the scientific concepts which radioactive beams can, and in fact already are, addressing. Instead, the intent was to address the technical problems associated with the construction of the next generation ISOL facility and to initiate a discussion of the type of experimental equipment that should be developed for such a facility. We have tried to bring together in Oak Ridge the world`s experts in radioactive targets/ion sources, light and heavy-ion accelerators, and detection systems. After 1 1/2 days of overview presentations, the participants divided into three discussion groups (Experiments with Radioactive Beams, Target Ion Sources and Mass Separation, and Accelerators-Primary and Secondary) for 1 1/2 days of detailed discussions of the most pertinent issues. The final session was devoted to reports from each of the discussion groups and a general discussion of where to go from here. An outgrowth of these discussions was the establishment of working groups to coordinate future technical developments associated with the pertinent issues. The proceedings include the text of all the overview presentations, reports from each discussion group, as well as contributions from those participants who chose to provide the text of their presentations in the discussion groups and the Concluding Remarks. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  4. Beam manipulation techniques, nonlinear beam dynamics, and space charge effect in high energy high power accelerators

    SciTech Connect (OSTI)

    Lee, S. Y.

    2014-04-07T23:59:59.000Z

    We had carried out a design of an ultimate storage ring with beam emittance less than 10 picometer for the feasibility of coherent light source at X-ray wavelength. The accelerator has an inherent small dynamic aperture. We study method to improve the dynamic aperture and collective instability for an ultimate storage ring. Beam measurement and accelerator modeling are an integral part of accelerator physics. We develop the independent component analysis (ICA) and the orbit response matrix method for improving accelerator reliability and performance. In collaboration with scientists in National Laboratories, we also carry out experimental and theoretical studies on beam dynamics. Our proposed research topics are relevant to nuclear and particle physics using high brightness particle and photon beams.

  5. Beam dynamics studies for transverse electromagnetic mode type rf deflectors

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ahmed, Shahid; Krafft, Geoffrey A.; Deitrick, Kirsten; De Silva, Subashini U.; Delayen, Jean R.; Spata, Mike; Tiefenback, Michael; Hofler, Alicia; Beard, Kevin

    2012-02-01T23:59:59.000Z

    We have performed three-dimensional simulations of beam dynamics for transverse electromagnetic mode (TEM) type rf deflectors: normal and superconducting. The compact size of these cavities as compared to the conventional TM110 type structures is more attractive particularly at low frequency. Highly concentrated electromagnetic fields between the parallel bars provide strong electrical stability to the beam for any mechanical disturbance. An array of six 2-cell normal conducting cavities or a single cell superconducting structure is enough to produce the required vertical displacement at the target point. Both the normal and superconducting structures show very small emittance dilution due to the vertical kick of the beam.

  6. Beam Dynamics and Instabilities in ELIC Design

    SciTech Connect (OSTI)

    S. Ahmed,B. Yunn,G. Krafft

    2011-09-01T23:59:59.000Z

    In this paper, we report the first study of beam related instabilities in lepton ring of the proposed electron-ion collider beyond the 12 GeV upgrade of CEBAF at Jefferson lab. The design parameters are consistent with PEP-II. Present studies reveal that coupled bunch and two stream instabilities are important issues and we need feedback system. The Medium Energy Electron Ion Collider (MEIC) at Jefferson Lab has been envisioned as future high energy particle accelerator beyond the 12 GeV upgrade of CEBAF. The MEIC will consist of the existing polarized electron source complex with 12 GeV upgrade and a new ion complex with polarized and unpolarized light to medium ions. The conceptual layout is shown in Fig. 1 and the basic parameters in comparison with the similar machines are discussed in Table 1. The maximum permissible collision frequency at 1.5 GHz is dictated by the existing electron machine, allowing the relatively small charge per bunch and large crossing angle resulting in the increased beam stability and high luminosity. In this paper, we present the preliminary study of collective effects for e-ring.

  7. Beam Dynamical Evolutions in a Solenoid Channel: A Review

    E-Print Network [OSTI]

    H. F. Kisoglu; M. Yilmaz

    2014-09-15T23:59:59.000Z

    Today a linear particle accelerator (linac), in which electric and magnetic fields are of vital importance, is one of the popular energy generation sources like Accelerator Driven System (ADS). A multipurpose, including primarily ADS, proton linac with energy of ~2 GeV is planned to constitute within the Turkish Accelerator Center (TAC) project collaborated by more than 10 Turkish universities. A Low Energy Beam Transport (LEBT) channel with two solenoids is a subcomponent of this linac. This solenoid channel transports the proton beam ejected by a proton source, and matches it with the Radio Frequency Quadrupole (RFQ) that is a subcomponent just after the LEBT. These solenoid magnets are used as focusing element to get the beam divergence and emittance growth under control. This paper includes settings of the LEBT solenoids with regard to beam dynamics, which investigates the beam particles motion in particle accelerators, for TAC proton linac done by using a beam dynamics simulation code PATH MANAGER. Furthermore, the simulation results have been interpreted analytically.

  8. Radio Frequency Station - Beam Dynamics Interaction in Circular Accelerators

    SciTech Connect (OSTI)

    Mastoridis, Themistoklis; /Stanford U., Elect. Eng. Dept. /SLAC

    2011-03-01T23:59:59.000Z

    The longitudinal beam dynamics in circular accelerators is mainly defined by the interaction of the beam current with the accelerating Radio Frequency (RF) stations. For stable operation, Low Level RF (LLRF) feedback systems are employed to reduce coherent instabilities and regulate the accelerating voltage. The LLRF system design has implications for the dynamics and stability of the closed-loop RF systems as well as for the particle beam, and is very sensitive to the operating range of accelerator currents and energies. Stability of the RF loop and the beam are necessary conditions for reliable machine operation. This dissertation describes theoretical formalisms and models that determine the longitudinal beam dynamics based on the LLRF implementation, time domain simulations that capture the dynamic behavior of the RF station-beam interaction, and measurements from the Positron-Electron Project (PEP-II) and the Large Hadron Collider (LHC) that validate the models and simulations. These models and simulations are structured to capture the technical characteristics of the system (noise contributions, non-linear elements, and more). As such, they provide useful results and insight for the development and design of future LLRF feedback systems. They also provide the opportunity to study diverse longitudinal beam dynamics effects such as coupled-bunch impedance driven instabilities and single bunch longitudinal emittance growth. Coupled-bunch instabilities and RF station power were the performance limiting effects for PEP-II. The sensitivity of the instabilities to individual LLRF parameters, the effectiveness of alternative operational algorithms, and the possible tradeoffs between RF loop and beam stability were studied. New algorithms were implemented, with significant performance improvement leading to a world record current during the last PEP-II run of 3212 mA for the Low Energy Ring. Longitudinal beam emittance growth due to RF noise is a major concern for LHC. Simulations studies and measurements were conducted that clearly show the correlation between RF noise and longitudinal bunch emittance, identify the major LLRF noise contributions, and determine the RF component dominating this effect. With these results, LHC upgrades and alternative algorithms are evaluated to reduce longitudinal emittance growth during operations. The applications of this work are described with regard to future machines and analysis of new technical implementations, as well as to possible future work which would continue the directions of this dissertation.

  9. Beam Dynamics Study for TESLA with the Integrated FEL

    E-Print Network [OSTI]

    Beam Dynamics Study for TESLA with the Integrated FEL V.M. Tsakanov Yerevan Physics Institute : : : : : : : : : : : : : : : : : : : : : : : 7 2.3 Conclusion 1 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 10 3 The TESLA high based trajectory correction : : : : : : : : : : : : 22 5 Summary 25 1 #12;. 1 Introduction In the TESLA

  10. Online optimization of storage ring nonlinear beam dynamics

    E-Print Network [OSTI]

    Huang, Xiaobiao

    2015-01-01T23:59:59.000Z

    We propose to optimize the nonlinear beam dynamics of existing and future storage rings with direct online optimization techniques. This approach may have crucial importance for the implementation of diffraction limited storage rings. In this paper considerations and algorithms for the online optimization approach are discussed. We have applied this approach to experimentally improve the dynamic aperture of the SPEAR3 storage ring with the robust conjugate direction search method and the particle swarm optimization method. The dynamic aperture was improved by more than 5 mm within a short period of time. Experimental setup and results are presented.

  11. Non Linear Beam Dynamics Studies at SPEAR

    SciTech Connect (OSTI)

    Terebilo, A.; Pellegrini, C.; /UCLA; Cornacchia, M.; Corbett, J.; Martin, D.; /SLAC

    2011-09-12T23:59:59.000Z

    The frequency map analysis of a Hamiltonian system recently introduced to accelerators physics in combination with turn-by-turn phase space measurements opens new experimental opportunities for studying non linear dynamic in storage rings. In this paper we report on the experimental program at SPEAR having the goal of measuring the frequency map of the machine. In this paper we discuss the accuracy of the instantaneous tune extraction from experimental data and demonstrate the possibility of the frequency map measurement. The instantaneous tune extraction technique can be applied to experimental tracking data with reasonable accuracy. Frequency map can be experimentally determined using the existing turn-by-turn phase space measurement techniques and NAFF instantaneous tune extraction.

  12. Beam Dynamics Studies of Parallel-Bar Deflecting Cavities

    SciTech Connect (OSTI)

    S. Ahmed, G. Krafft, K. Detrick, S. Silva, J. Delayen, M. Spata ,M. Tiefenback, A. Hofler ,K. Beard

    2011-03-01T23:59:59.000Z

    We have performed three-dimensional simulations of beam dynamics for parallel-bar transverse electromagnetic mode (TEM) type RF separators: normal- and super-conducting. The compact size of these cavities as compared to conventional TM$_{110}$ type structures is more attractive particularly at low frequency. Highly concentrated electromagnetic fields between the parallel bars provide strong electrical stability to the beam for any mechanical disturbance. An array of six 2-cell normal conducting cavities or a one- or two-cell superconducting structure are enough to produce the required vertical displacement at the Lambertson magnet. Both the normal and super-conducting structures show very small emittance dilution due to the vertical kick of the beam.

  13. Dynamics of Ion Beam Stimulated Surface Mass Transport to Nanopores David P. Hoogerheide1

    E-Print Network [OSTI]

    Dynamics of Ion Beam Stimulated Surface Mass Transport to Nanopores David P. Hoogerheide1 membrane, from the substrate side, by rastering a 10-nm diameter, 50 keV gallium ion beam produced by a FEI We explore the ion beam-induced dynamics of the formation of large features at the edges of nanopores

  14. Crossed-beam studies of the dynamics of radical reactions

    SciTech Connect (OSTI)

    Liu, K. [Argonne National Laboratory, IL (United States)

    1993-12-01T23:59:59.000Z

    The objective of this program is to characterize the detailed dynamics of elementary radical reactions and to provide a better understanding of radical reactivity in general. The radical beam is typically generated by a laser photolysis method. After colliding with the reacting molecule in a crossed-beam apparatus, the reaction product state distribution is interrogated by laser spectroscopic techniques. Several radicals of combustion significance, such as O, CH, OH, CN and NCO have been successfully generated and their collisional behavior at the state-to-state integral cross section level of detail has been studied in this manner. During the past year, the detection system has been converted from LIF to REMPI schemes, and the emphasis of this program shifted to investigate the product angular distributions. Both inelastic and reactive processes have been studied.

  15. UK Workshop on Grid Security Experiences, Oxford 8th and 9th July 2004 Multilayer Privilege Management for Dynamic Collaborative

    E-Print Network [OSTI]

    Kent, University of

    UK Workshop on Grid Security Experiences, Oxford 8th and 9th July 2004 Multilayer Privilege will witness on-demand creation of dynamically-evolving, scalable Virtual Organisations (VO) spanning national satellite imagery). Being a large project, it would have several work packages involving different parts

  16. 13th Winter Workshop on Nuclear Dynamics W.J. Llope Marathon Key, Florida, February 18, 1997 Rice University

    E-Print Network [OSTI]

    Llope, William J.

    test . Completed Spring, 1999 Nuclear matter under extreme conditions... Search for, and studies of, February 1­8, 1997 Rice University TPC . 24+2 outer, and 24+2 inner, sectors built & tested . gas vessel13th Winter Workshop on Nuclear Dynamics W.J. Llope Marathon Key, Florida, February 1­8, 1997 Rice

  17. Averaged dynamics of ultra-relativisitc charged particles beams

    E-Print Network [OSTI]

    Ricardo Gallego Torromé

    2012-06-19T23:59:59.000Z

    In this thesis, we consider the suitability of using the charged cold fluid model in the description of ultra-relativistic beams. The method that we have used is the following. Firstly, the necessary notions of kinetic theory and differential geometry of second order differential equations are explained. Then an averaging procedure is applied to a connection associated with the Lorentz force equation. The result of this averaging is an affine connection on the space-time manifold. The corresponding geodesic equation defines the averaged Lorentz force equation. We prove that for ultra-relativistic beams described by narrow distribution functions, the solutions of both equations are similar. This fact justifies the replacement of the Lorentz force equation by the simpler {\\it averaged Lorentz force equation}. After this, for each of these models we associate the corresponding kinetic model, which are based on the Vlasov equation and {\\it averaged Vlasov equation} respectively. The averaged Vlasov equation is simpler than the original Vlasov equation. This fact allows us to prove that the differential operation defining the averaged charged cold fluid equation is controlled by the {\\it diameter of the distribution function}, by powers of the {\\it energy of the beam} and by the time of evolution $t$. We show that the Vlasov equation and the averaged Vlasov equation have similar solutions, when the initial conditions are the same. Finally, as an application of the {\\it averaged Lorentz force equation} we re-derive the beam dynamics formalism used in accelerator physics from the Jacobi equation of the averaged Lorentz force equation.

  18. DYNAMICS OF INFRARED MULTIPHOTON DISSOCIATION OF SF6 BY MOLECULAR BEAM METHOD

    E-Print Network [OSTI]

    Grant, E.R.

    2010-01-01T23:59:59.000Z

    molecular beam apparatus has been adapted to study the dynamics of excitationdynamics of molecular decomposition and the degree of vibrational excitation,

  19. Presented at the Workshop on Cartan Connections, Geometry of Homogeneous Spaces, and Dynamics, ESI, Vienna, July 2011 Two-jets of conformal fields along their zero sets

    E-Print Network [OSTI]

    Derdzinski, Andrzej

    Presented at the Workshop on Cartan Connections, Geometry of Homogeneous Spaces, and Dynamics, ESI A of so(TM) and some function : M IR, 2 v = A + Id. In coordinates: vj,k + vk,j = gjk (notation

  20. Presented at the Workshop on Cartan Connections, Geometry of Homogeneous Spaces, and Dynamics, ESI, Vienna, July 2011 Two-jets of conformal fields along their zero sets

    E-Print Network [OSTI]

    Derdzinski, Andrzej

    Presented at the Workshop on Cartan Connections, Geometry of Homogeneous Spaces, and Dynamics, ESI IR, 2 v = A + Id, or, in coordinates, vj,k + vk,j = gjk . (1) The covariant derivative v is treated

  1. SURFACE ELASTICITY MODELS FOR STATIC AND DYNAMIC RESPONSE OF NANOSCALE BEAMS

    E-Print Network [OSTI]

    Phani, A. Srikantha

    SURFACE ELASTICITY MODELS FOR STATIC AND DYNAMIC RESPONSE OF NANOSCALE BEAMS by Chang Liu B) THE UNIVERSITY OF BRITISH COLUMBIA (Vancouver) February 2010 © Chang Liu, 2010 #12;ii Abstract Nanoscale beam of nanoscale beams. The objective is to provide NEMS designers with an efficient set of tools that can predict

  2. The Dynamical Dipole Radiation in Dissipative Collisions with Exotic Beams

    E-Print Network [OSTI]

    M. Di Toro; M. Colonna; C. Rizzo; V. Baran

    2007-11-22T23:59:59.000Z

    Heavy Ion Collisions (HIC) represent a unique tool to probe the in-medium nuclear interaction in regions away from saturation. In this work we present a selection of reaction observables in dissipative collisions particularly sensitive to the isovector part of the interaction, i.e. to the symmetry term of the nuclear Equation of State (EoS). At low energies the behavior of the symmetry energy around saturation influences dissipation and fragment production mechanisms. We will first discuss the recently observed Dynamical Dipole Radiation, due to a collective neutron-proton oscillation during the charge equilibration in fusion and deep-inelastic collisions. We will review in detail all the main properties, yield, spectrum, damping and angular distributions, revealing important isospin effects. Reactions induced by unstable 132Sn beams appear to be very promising tools to test the sub-saturation Isovector EoS. Predictions are also presented for deep-inelastic and fragmentation collisions induced by neutron rich projectiles. The importance of studying violent collisions with radioactive beams at low and Fermi energies is finally stressed.

  3. Dynamic Processes in Biology, Chemistry, and Materials Science: Opportunities for UltraFast Transmission Electron Microscopy - Workshop Summary Report

    SciTech Connect (OSTI)

    Kabius, Bernd C.; Browning, Nigel D.; Thevuthasan, Suntharampillai; Diehl, Barbara L.; Stach, Eric A.

    2012-07-25T23:59:59.000Z

    This report summarizes a 2011 workshop that addressed the potential role of rapid, time-resolved electron microscopy measurements in accelerating the solution of important scientific and technical problems. A series of U.S. Department of Energy (DOE) and National Academy of Science workshops have highlighted the critical role advanced research tools play in addressing scientific challenges relevant to biology, sustainable energy, and technologies that will fuel economic development without degrading our environment. Among the specific capability needs for advancing science and technology are tools that extract more detailed information in realistic environments (in situ or operando) at extreme conditions (pressure and temperature) and as a function of time (dynamic and time-dependent). One of the DOE workshops, Future Science Needs and Opportunities for Electron Scattering: Next Generation Instrumentation and Beyond, specifically addressed the importance of electron-based characterization methods for a wide range of energy-relevant Grand Scientific Challenges. Boosted by the electron optical advancement in the last decade, a diversity of in situ capabilities already is available in many laboratories. The obvious remaining major capability gap in electron microscopy is in the ability to make these direct in situ observations over a broad spectrum of fast (µs) to ultrafast (picosecond [ps] and faster) temporal regimes. In an effort to address current capability gaps, EMSL, the Environmental Molecular Sciences Laboratory, organized an Ultrafast Electron Microscopy Workshop, held June 14-15, 2011, with the primary goal to identify the scientific needs that could be met by creating a facility capable of a strongly improved time resolution with integrated in situ capabilities. The workshop brought together more than 40 leading scientists involved in applying and/or advancing electron microscopy to address important scientific problems of relevance to DOE’s research mission. This workshop built on previous workshops and included three breakout sessions identifying scientific challenges in biology, biogeochemistry, catalysis, and materials science frontier areas of fundamental science that underpin energy and environmental science that would significantly benefit from ultrafast transmission electron microscopy (UTEM). In addition, the current status of time-resolved electron microscopy was examined, and the technologies that will enable future advances in spatio-temporal resolution were identified in a fourth breakout session.

  4. Dynamic cone beam CT angiography of carotid and cerebral arteries using canine model

    SciTech Connect (OSTI)

    Cai Weixing; Zhao Binghui; Conover, David; Liu Jiangkun; Ning Ruola [Department of Imaging Sciences, University of Rochester, 601 Elmwood Avenue, Rochester, New York 14642 (United States); Department of Radiology, Shanghai 6th People's Hospital, 600 Yishan Road, Xuhui, Shanghai (China); Koning Corporation, Lennox Tech Enterprise Center, 150 Lucius Gordon Drive Suite 112, West Henrietta, New York 14586 (United States); Department of Imaging Sciences, University of Rochester, 601 Elmwood Avenue, Rochester, New York 14642 (United States); Department of Imaging Sciences, University of Rochester, 601 Elmwood Avenue, Rochester, New York 14642 (United States) and Koning Corporation, Lennox Tech Enterprise Center, 150 Lucius Gordon Drive Suite 112, West Henrietta, New York 14586 (United States)

    2012-01-15T23:59:59.000Z

    Purpose: This research is designed to develop and evaluate a flat-panel detector-based dynamic cone beam CT system for dynamic angiography imaging, which is able to provide both dynamic functional information and dynamic anatomic information from one multirevolution cone beam CT scan. Methods: A dynamic cone beam CT scan acquired projections over four revolutions within a time window of 40 s after contrast agent injection through a femoral vein to cover the entire wash-in and wash-out phases. A dynamic cone beam CT reconstruction algorithm was utilized and a novel recovery method was developed to correct the time-enhancement curve of contrast flow. From the same data set, both projection-based subtraction and reconstruction-based subtraction approaches were utilized and compared to remove the background tissues and visualize the 3D vascular structure to provide the dynamic anatomic information. Results: Through computer simulations, the new recovery algorithm for dynamic time-enhancement curves was optimized and showed excellent accuracy to recover the actual contrast flow. Canine model experiments also indicated that the recovered time-enhancement curves from dynamic cone beam CT imaging agreed well with that of an IV-digital subtraction angiography (DSA) study. The dynamic vascular structures reconstructed using both projection-based subtraction and reconstruction-based subtraction were almost identical as the differences between them were comparable to the background noise level. At the enhancement peak, all the major carotid and cerebral arteries and the Circle of Willis could be clearly observed. Conclusions: The proposed dynamic cone beam CT approach can accurately recover the actual contrast flow, and dynamic anatomic imaging can be obtained with high isotropic 3D resolution. This approach is promising for diagnosis and treatment planning of vascular diseases and strokes.

  5. Beam dynamics in accelerators for medical applications: from calculations to machine performance

    E-Print Network [OSTI]

    Beam dynamics in accelerators for medical applications: from calculations to machine performance S, z', W, RF-phase) at each time-moment for each particle in the accelerating bunch use cylindrical, Novosibirsk, Russian Federation #12;Main results of calculations 6 ...transverse beam size during acceleration

  6. Crossed molecular beam studies of atmospheric chemical reaction dynamics

    SciTech Connect (OSTI)

    Zhang, Jingsong

    1993-04-01T23:59:59.000Z

    The dynamics of several elementary chemical reactions that are important in atmospheric chemistry are investigated. The reactive scattering of ground state chlorine or bromine atoms with ozone molecules and ground state chlorine atoms with nitrogen dioxide molecules is studied using a crossed molecular beams apparatus with a rotatable mass spectrometer detector. The Cl + O{sub 3} {yields} ClO + O{sub 2} reaction has been studied at four collision energies ranging from 6 kcal/mole to 32 kcal/mole. The derived product center-of-mass angular and translational energy distributions show that the reaction has a direct reaction mechanism and that there is a strong repulsion on the exit channel. The ClO product is sideways and forward scattered with respect to the Cl atom, and the translational energy release is large. The Cl atom is most likely to attack the terminal oxygen atom of the ozone molecule. The Br + O{sub 3} {yields} ClO + O{sub 2} reaction has been studied at five collision energies ranging from 5 kcal/mole to 26 kcal/mole. The derived product center-of-mass angular and translational energy distributions are quite similar to those in the Cl + O{sub 3} reaction. The Br + O{sub 3} reaction has a direct reaction mechanism similar to that of the Cl + O{sub 3} reaction. The electronic structure of the ozone molecule seems to play the central role in determining the reaction mechanism in atomic radical reactions with the ozone molecule. The Cl + NO{sub 2} {yields} ClO + NO reaction has been studied at three collision energies ranging from 10.6 kcal/mole to 22.4 kcal/mole. The center-of-mass angular distribution has some forward-backward symmetry, and the product translational energy release is quite large. The reaction proceeds through a short-lived complex whose lifetime is less than one rotational period. The experimental results seem to show that the Cl atom mainly attacks the oxygen atom instead of the nitrogen atom of the NO{sub 2} molecule.

  7. SciTech Connect: Report of the ICFA Beam Dynamics Workshop 'Accelerators

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBi (2) Sr (2) Ca (2)FrameworkextendedComposite Forfor a Higgs

  8. The 19th ICFA Advanced Beam Dynamics Workshop on Future Light Sources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layered NbS2 and NbSe2 .

  9. Nano-electron beam induced current and hole charge dynamics through uncapped Ge nanocrystals

    SciTech Connect (OSTI)

    Marchand, A.; El Hdiy, A.; Troyon, M. [Laboratoire de Recherche en Nanosciences, Bat. 6, case no 15, UFR Sciences, Universite de Reims Champagne Ardenne, 51687 Reims Cedex 2 (France); Amiard, G.; Ronda, A.; Berbezier, I. [IM2NP, Faculte des Sciences et Techniques, Campus de Saint Jerome - Case 142, Avenue Escadrille Normandie Niemen, 13397 Marseille Cedex 20 (France)

    2012-04-16T23:59:59.000Z

    Dynamics of hole storage in spherical Ge nanocrystals (NCs) formed by a two step dewetting/nucleation process on an oxide layer grown on an n-doped <001> silicon substrate is studied using a nano-electron beam induced current technique. Carrier generation is produced by an electron beam irradiation. The generated current is collected by an atomic force microscope--tip in contact mode at a fixed position away from the beam spot of about 0.5 {mu}m. This distance represents the effective diffusion length of holes. The time constants of holes charging are determined and the effect of the NC size is underlined.

  10. LHeC ERL Design and Beam-dynamics Issues

    SciTech Connect (OSTI)

    S.A. Bogacz, I. Shin, D. Schulte, F. Zimmermann

    2011-09-01T23:59:59.000Z

    We discuss machine and beam parameter choices for a Linac-Ring option of the Large Hadron electron Collider (LHeC) based on the LHC. With the total wall-plug power limited to 100 MW and a target current of about 6 mA the desired luminosity of 1033 cm-2 s-1 can be reached, providing one exploits unique features of the Energy Recovery Linac (ERL). Here, we describe the overall layout of such ERL complex located on the LHC site. We present an optimized multi-pass linac optics enabling operation of the proposed 3-pass Recirculating Linear Accelerator (RLA) in the Energy Recovery mode. We also describe emittance preserving return arc optics architecture; including layout and optics of the arc switch-yard. Furthermore, we discuss importance of collective effects such as: beam breakup in the RLA, as well as ion accumulation, with design-integrated mitigation measures, and the electron-beam disruption in collision. Finally, a few open questions are highlighted.

  11. IPHE Infrastructure Workshop - Workshop Proceedings, February...

    Broader source: Energy.gov (indexed) [DOE]

    IPHE Infrastructure Workshop - Workshop Proceedings, February 25-26, 2010 Sacramento, CA IPHE Infrastructure Workshop - Workshop Proceedings, February 25-26, 2010 Sacramento, CA...

  12. Non-adiabatic ab initio molecular dynamics of supersonic beam epitaxy of silicon carbide at room temperature

    E-Print Network [OSTI]

    Alfè, Dario

    Non-adiabatic ab initio molecular dynamics of supersonic beam epitaxy of silicon carbide at room-adiabatic ab initio molecular dynamics of supersonic beam epitaxy of silicon carbide at room temperature Simone film crystal growth of silicon carbide (SiC), a semiconductor syn- thesized to replace silicon in harsh

  13. Summary report of working group 5: Beam and radiation generation, monitoring, and control

    SciTech Connect (OSTI)

    Church, Mike; /Fermilab; Kim, Ki-Yong; /Maryland U.

    2010-01-01T23:59:59.000Z

    This paper summarizes the activities and presentations of Working Group 5 of the Advanced Accelerator Concepts Workshop held at Annapolis, Maryland in June 2010. Working Group 5 touched on a broad range of topics in the fields of beam and radiation generation and their monitoring and control. These topics were not comprehensively covered in this Workshop, but rather the Working Group concentrated on specific new developments and recent investigations. The Working Group divided its sessions into four broad categories: cathodes and electron guns, radiation generation, beam diagnostics, and beam control and dynamics. This summary is divided into the same structure.

  14. 13th Winter Workshop on Nuclear Dynamics W.J. Llope Marathon Key, Florida, February 1-8, 1997 Rice University

    E-Print Network [OSTI]

    Llope, William J.

    , February 1-8, 1997 Rice University TPC · 24+2 outer, and 24+2 inner, sectors built & tested · gas vessel13th Winter Workshop on Nuclear Dynamics W.J. Llope Marathon Key, Florida, February 1-8, 1997 Rice superconducting rings · Ions from A~200 to polarized-p; also p+A · Magnets look great, "Super Sunday" sextant test

  15. Characterization of beam dynamics in the APS injector rings using time-resolved imaging techniques

    SciTech Connect (OSTI)

    Yang, B.X.; Lumpkin, A.H.; Borland, M. [and others

    1997-06-01T23:59:59.000Z

    Images taken with streak cameras and gated intensified cameras with both time (longitudinal) and spatial (transverse) resolution reveal a wealth of information about circular accelerators. The authors illustrate a novel technique by a sequence of dual-sweep streak camera images taken at a high dispersion location in the booster synchrotron, where the horizontal coordinate is strongly correlated with the particle energy and the {open_quotes}top-view{close_quotes} of the beam gives a good approximation to the particle density distribution in the longitudinal phase space. A sequence of top-view images taken fight after injection clearly shows the beam dynamics in the phase space. We report another example from the positron accumulator ring for the characterization of its beam compression bunching with the 12th harmonic rf.

  16. Generation of directional, coherent matter beams through dynamical instabilities in Bose-Einstein condensates

    SciTech Connect (OSTI)

    Dennis, Graham R.; Johnsson, Mattias T. [Department of Quantum Science, Australian National University, Canberra 0200, Australia and Australian Research Council Centre of Excellence for Quantum-Atom Optics, Australian National University, Canberra 0200 (Australia)

    2010-09-15T23:59:59.000Z

    We present a theoretical analysis of a coupled, two-state Bose-Einstein condensate with nonequal scattering lengths and show that dynamical instabilities can be excited. We demonstrate that these instabilities are exponentially amplified, resulting in highly directional, oppositely propagating, coherent matter beams at specific momenta. To accomplish this we prove that the mean field of our system is periodic and extend the standard Bogoliubov approach to consider a time-dependent, but cyclic, background. This allows us to use Floquet's theorem to gain analytic insight into such systems, rather than employing the usual Bogoliubov-de Gennes approach, which is usually limited to numerical solutions. We apply our theory to the metastable helium atom laser experiment by Dall et al. [Phys. Rev. A 79, 011601(R) (2009)] and show that it explains the anomalous beam profiles they observed. Finally, we demonstrate that the paired particle beams will be Einstein-Podolsky-Rosen entangled on formation.

  17. Beam dynamics aspects of crab cavities in the CERN Large Hadron Collider

    E-Print Network [OSTI]

    Sun, Y P; Barranco, J; Tomàs, R; Weiler, T; Zimmermann, F; Calaga, R; Morita, A

    2009-01-01T23:59:59.000Z

    Modern colliders bring into collision a large number of bunches to achieve a high luminosity. The longrange beam-beam effects arising from parasitic encounters at such colliders are mitigated by introducing acrossing angle. Under these conditions, crab cavities (CC) can be used to restore effective head-on collisions and thereby to increase the geometric luminosity. Such crab cavities have been proposed for both linear and circular colliders. The crab cavities are rf cavities operated in a transverse dipole mode, which imparts on the beam particles a transverse kick that varies with the longitudinal position along the bunch. The use of crab cavities in the Large Hadron Collider (LHC) may not only raise the luminosity, but it could also complicate the beam dynamics, e.g., crab cavities might not only cancel synchrobetatron resonances excited by the crossing angle but they could also excite new ones, they could reduce the dynamic aperture for off-momentum particles, they could influence the aperture and orbit, ...

  18. Beam dynamics aspects of crab cavities in the CERN Large Hadron Collider

    E-Print Network [OSTI]

    Sun, Y P; Barranco, J; Tomás, R; Weiler, T; Zimmermann, F; Calaga, R; Morita, A

    2009-01-01T23:59:59.000Z

    Modern colliders bring into collision a large number of bunches to achieve a high luminosity. The long-range beam-beam effects arising from parasitic encounters at such colliders are mitigated by introducing a crossing angle. Under these conditions, crab cavities (CC) can be used to restore effective head-on collisions and thereby to increase the geometric luminosity. Such crab cavities have been proposed for both linear and circular colliders. The crab cavities are rf cavities operated in a transverse dipole mode, which imparts on the beam particles a transverse kick that varies with the longitudinal position along the bunch. The use of crab cavities in the Large Hadron Collider (LHC) may not only raise the luminosity, but it could also complicate the beam dynamics, e.g., crab cavities might not only cancel synchrobetatron resonances excited by the crossing angle but they could also excite new ones, they could reduce the dynamic aperture for off-momentum particles, they could influence the aperture and orbit...

  19. The Dynamical Dipole Mode in Fusion Reactions with Exotic Nuclear Beams

    E-Print Network [OSTI]

    V. Baran; C. Rizzo; M. Colonna; M. Di Toro; D. Pierroutsakou

    2009-02-09T23:59:59.000Z

    We report the properties of the prompt dipole radiation, produced via a collective bremsstrahlung mechanism, in fusion reactions with exotic beams. We show that the gamma yield is sensitive to the density dependence of the symmetry energy below/around saturation. Moreover we find that the angular distribution of the emitted photons from such fast collective mode can represent a sensitive probe of its excitation mechanism and of fusion dynamics in the entrance channel.

  20. Workshop on algorithms for macromolecular modeling. Final project report, June 1, 1994--May 31, 1995

    SciTech Connect (OSTI)

    Leimkuhler, B.; Hermans, J.; Skeel, R.D.

    1995-07-01T23:59:59.000Z

    A workshop was held on algorithms and parallel implementations for macromolecular dynamics, protein folding, and structural refinement. This document contains abstracts and brief reports from that workshop.

  1. PKI Workshop | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    PKI Workshop PKI Workshop PKI Workshop.pdf More Documents & Publications ICAM Workshop Radio and Spectrum Management Ad Hoc Meetings...

  2. Beam Energy and System Size Dependence of Dynamical Net Charge Fluctuations

    SciTech Connect (OSTI)

    STAR Coll

    2008-07-21T23:59:59.000Z

    We present measurements of net charge fluctuations in Au + Au collisions at {radical}s{sub NN} = 19.6, 62.4, 130, and 200 GeV, Cu + Cu collisions at {radical}s{sub NN} = 62.4, 200 GeV, and p + p collisions at {radical}s = 200 GeV using the dynamical net charge fluctuations measure {nu}{sub {+-},dyn}. We observe that the dynamical fluctuations are non-zero at all energies and exhibit a modest dependence on beam energy. A weak system size dependence is also observed. We examine the collision centrality dependence of the net charge fluctuations and find that dynamical net charge fluctuations violate 1/N{sub ch} scaling, but display approximate 1/N{sub part} scaling. We also study the azimuthal and rapidity dependence of the net charge correlation strength and observe strong dependence on the azimuthal angular range and pseudorapidity widths integrated to measure the correlation.

  3. Beam dynamics studies of the 8 GeV Linac at FNAL

    SciTech Connect (OSTI)

    Ostroumov, P.N.; Mustapha, B.; /Argonne; Carneiro, J.-P.; /Fermilab

    2008-11-01T23:59:59.000Z

    The proposed 8-GeV proton driver (PD) linac at FNAL includes a front end up to {approx}420 MeV operating at 325 MHz and a high energy section at 1300 MHz. A normal conducting RFQ and short CH type resonators are being developed for the initial acceleration of the H-minus or proton beam up to 10 MeV. From 10 MeV to {approx}420 MeV, the voltage gain is provided by superconducting (SC) spoke-loaded cavities. In the high-energy section, the acceleration will be provided by the International Linear Collider (ILC)-style SC elliptical cell cavities. To employ existing, readily available klystrons, an RF power fan out from high-power klystrons to multiple cavities is being developed. The beam dynamics simulation code TRACK, available in both serial and parallel versions, has been updated to include all known H-minus stripping mechanisms to predict the exact location of beam losses. An iterative simulation procedure is being developed to interact with a transient beam loading model taking into account RF feedback and feedforward systems.

  4. Synchronous digitization for high dynamic range lock-in amplification in beam-scanning microscopy

    SciTech Connect (OSTI)

    Muir, Ryan D.; Sullivan, Shane Z.; Oglesbee, Robert A.; Simpson, Garth J., E-mail: gsimpson@purdue.edu [Department of Chemistry, Purdue University, 560 Oval Drive, West Lafayette, Indiana 47907 (United States)

    2014-03-15T23:59:59.000Z

    Digital lock-in amplification (LIA) with synchronous digitization (SD) is shown to provide significant signal to noise (S/N) and linear dynamic range advantages in beam-scanning microscopy measurements using pulsed laser sources. Direct comparisons between SD-LIA and conventional LIA in homodyne second harmonic generation measurements resulted in S/N enhancements consistent with theoretical models. SD-LIA provided notably larger S/N enhancements in the limit of low light intensities, through the smooth transition between photon counting and signal averaging developed in previous work. Rapid beam scanning instrumentation with up to video rate acquisition speeds minimized photo-induced sample damage. The corresponding increased allowance for higher laser power without sample damage is advantageous for increasing the observed signal content.

  5. X WORKSHOP ON NUCLEAR PHYSICS (WONP 2005)

    E-Print Network [OSTI]

    Stevenson, Paul

    First Call X WORKSHOP ON NUCLEAR PHYSICS (WONP´ 2005) The X International Workshop on Nuclear Physics, Nuclear Physics, Particles and Fields, Physics of Beams, Radiation Physics, Radiation Protection Manso Guevara Nuclear Physics Department Instituto Superior de Tecnologias y Ciencias Aplicadas (In

  6. Effect of Field Errors in Muon Collider IR Magnets on Beam Dynamics

    SciTech Connect (OSTI)

    Alexahin, Y.; Gianfelice-Wendt, E.; Kapin, V.V.; /Fermilab

    2012-05-01T23:59:59.000Z

    In order to achieve peak luminosity of a Muon Collider (MC) in the 10{sup 35} cm{sup -2}s{sup -1} range very small values of beta-function at the interaction point (IP) are necessary ({beta}* {le} 1 cm) while the distance from IP to the first quadrupole can not be made shorter than {approx}6 m as dictated by the necessity of detector protection from backgrounds. In the result the beta-function at the final focus quadrupoles can reach 100 km making beam dynamics very sensitive to all kind of errors. In the present report we consider the effects on momentum acceptance and dynamic aperture of multipole field errors in the body of IR dipoles as well as of fringe-fields in both dipoles and quadrupoles in the ase of 1.5 TeV (c.o.m.) MC. Analysis shows these effects to be strong but correctable with dedicated multipole correctors.

  7. BEAM DYNAMICS SIMULATIONS OF SARAF ACCELERATOR INCLUDING ERROR PROPAGATION AND IMPLICATIONS FOR THE EURISOL DRIVER

    E-Print Network [OSTI]

    J. Rodnizki, D. Berkovits, K. Lavie, I. Mardor, A. Shor and Y. Yanay (Soreq NRC, Yavne), K. Dunkel, C. Piel (ACCEL, Bergisch Gladbach), A. Facco (INFN/LNL, Legnaro, Padova), V. Zviagintsev (TRIUMF, Vancouver)

    AbstractBeam dynamics simulations of SARAF (Soreq Applied Research Accelerator Facility) superconducting RF linear accelerator have been performed in order to establish the accelerator design. The multi-particle simulation includes 3D realistic electromagnetic field distributions, space charge forces and fabrication, misalignment and operation errors. A 4 mA proton or deuteron beam is accelerated up to 40 MeV with a moderated rms emittance growth and a high real-estate gradient of 2 MeV/m. An envelope of 40,000 macro-particles is kept under a radius of 1.1 cm, well below the beam pipe bore radius. The accelerator design of SARAF is proposed as an injector for the EURISOL driver accelerator. The Accel 176 MHZ ?0=0.09 and ?0=0.15 HWR lattice was extended to 90 MeV based on the LNL 352 MHZ ?0=0.31 HWR. The matching between both lattices ensures smooth transition and the possibility to extend the accelerator to the required EURISOL ion energy.

  8. Beam dynamics of a double-gap acceleration cell for ion implantation with multiple atomic species

    SciTech Connect (OSTI)

    Wadlinger, E.A.; Lysenko, W.P.; Rusnak, B. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Saadatmand, K. [Eaton Corporation, Semiconductor Equipment Operation, 108 Cherry Hill Drive, Beverly, Massachusetts 01915 (United States)

    1997-02-01T23:59:59.000Z

    As a result of our work on ion implantation, we derived equations for the beam dynamics of a two-gap-resonator cavity for accelerating and bunching various ion species of varying energies with the cavity designed for one particular ion species of a given energy (the design-reference particle). A two gap structure is useful at low resonant frequencies where lumped circuit elements (inductors) can be used and the structure kept small. A single gap structure has the advantage that each gap can be independently phased to produce the desired beam dynamics behavior for various ion species and ion energies. However at low frequencies, single gap resonant structures can be large. We find that the two-gap structure, where the phase difference between gaps, for the design reference particle, is fixed at {pi} radians can give acceptable performance provided that the individual two gap cells in the entire accelerator are optimized for the ion species having the largest mass to charge ratio and having the maximum required output energy. Our equations show how to adjust the cavity phases and electric fields to obtain equivalent first-order accelerator performance for various ion species and energies. These equations allow for the effective evaluation of various accelerator concepts and can facilitate the tuning of a linac when changing energies and ion species. Extensive simulations have confirmed the efficacy of our equations. {copyright} {ital 1997 American Institute of Physics.}

  9. Beam-Dynamics Studies and Advanced Accelerator Research at CTF-3 Compact Final Focus, Laser Compton Scattering, Plasmas, etc.

    E-Print Network [OSTI]

    Assmann, R W; Burkhardt, H; Corsini, R; Faus-Golfe, A; Gronberg, J; Redaelli, S; Schulte, Daniel; Velasco, M; Zimmermann, Frank

    2002-01-01T23:59:59.000Z

    Preliminary investigations are summarized on the possible use of the CTF3 facility for extended beam-dynamics studies and advanced accelerator R&D, which would exploit its unique properties and beam availability. The key element of these considerations is the possible addition of a test beam-delivery system comprising a compact final focus and advanced collimation concepts, scaled from 3 TeV down to low energy and having a short total length. Operational experience, verification of critical questions (octupole tail folding, beam halo transport, etc.), diagnostics (e.g., rf BPMs) and stabilization could all be explored in such a facility, which would benefit not only the CLIC study, but all linear collider projects. Another interesting application would be the study of plasma-beam interaction, which may include plasma focusing, plasma acceleration, ion-channel radiation, and plasma wigglers.

  10. NREL: Systems Engineering - Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Workshops The Wind Energy Systems Engineering Workshop is a biennial workshop that invites speakers from academia, industry, and international research laboratories to discuss...

  11. Workshop on the RHIC performance

    SciTech Connect (OSTI)

    Khiari, F.; Milutinovic, J.; Ratti, A.; Rhoades-Brown, M.J. (eds.)

    1988-07-01T23:59:59.000Z

    The most recent conceptual design manual for the Relativistic Heavy Ion Collider (RHIC) at Brookhaven was published in May 1986 (BNL 51932). The purpose of this workshop was to review the design specifications in this RHIC reference manual, and to discuss in detail possible improvements in machine performance by addressing four main areas. These areas are beam-beam interactions, stochastic cooling, rf and bunch instabilities. The contents of this proceedings are as follows. Following an overview of the workshop, in which the motivation and goals are discussed in detail, transcripts of the first day talks are given. Many of these transcripts are copies of the original transparencies presented at the meeting. The following four sections contain contributed papers, that resulted from discussions at the workshop within each of the four working groups. In addition, there is a group summary for each of the four working groups at the beginning of each section. Finally, a list of participants is given.

  12. A Multimedia Tutorial for Charged-Particle Beam Dynamics. Final report

    SciTech Connect (OSTI)

    Silbar, Richard R.

    1999-07-26T23:59:59.000Z

    In September 1995 WhistleSoft, Inc., began developing a computer-based multimedia tutorial for charged-particle beam dynamics under Phase II of a Small Business Innovative Research grant from the U.S. Department of Energy. In Phase I of this project (see its Final Report) we had developed several prototype multimedia modules using an authoring system on NeXTStep computers. Such a platform was never our intended target, and when we began Phase II we decided to make the change immediately to develop our tutorial modules for the Windows and Macintosh microcomputer market. This Report details our progress and accomplishments. It also gives a flavor of the look and feel of the presently available and upcoming modules.

  13. WORKSHOP ON NUCLEAR DYNAMICS

    E-Print Network [OSTI]

    Myers, W.D.

    2010-01-01T23:59:59.000Z

    References 1) P. Danielewicz, Ph.D. Theses, WarsawEvening Session P. Danielewicz, "Quantum Description of the

  14. Dynamics of a beam of hot electrons propagating through a plasma in the presence of nonthermal electrons

    SciTech Connect (OSTI)

    Khalilpour, H.; Moslehi-Fard, M. [Faculty of Physics, Tabriz University, 51664 Tabriz (Iran, Islamic Republic of); Foroutan, G. [Department of Physics, Faculty of Science, Sahand University of Technology, 51335-1996 Tabriz (Iran, Islamic Republic of); School of Physics, University of Sydney, Sydney, New South Wales 2006 (Australia); Li, B.; Robinson, P. A. [School of Physics, University of Sydney, Sydney, New South Wales 2006 (Australia)

    2009-07-15T23:59:59.000Z

    The dynamics of a beam of hot electrons traveling through a cold plasma and the generation of Langmuir waves are investigated in the presence of a nonthermal tail of electrons in the background distribution function. Using quasilinear simulations, it is shown that in the presence of the nonthermal electrons, the relaxation of the beam distribution function in velocity space is retarded and the Langmuir waves are strongly damped at low velocities. The average velocity of beam propagation is almost constant but its magnitude is larger in the presence of nonthermal electrons than their absence. It is found that the self-similarity of the system is preserved in the presence of nonthermal electrons. The effects of nonthermal electrons on the evolution of gas-dynamical parameters of the beam, including the height of plateau in the beam distribution function, its upper and lower velocity boundaries, and beam velocity width, are also studied. It is found that initially the values of the upper and lower velocity boundaries are almost unaltered, but at large times the lower (upper) boundary velocity is larger (smaller) in the presence of nonthermal electrons than without the nonthermal electrons.

  15. Time-resolved reflectivity techniques for dynamic studies of electron beam recrystallization of silicon-on-insulator films

    SciTech Connect (OSTI)

    Timans, P.J.; McMahon, R.A.; Ahmed, H.

    1988-11-07T23:59:59.000Z

    A time-resolved reflectivity (TRR) technique has been developed for dynamic studies of swept beam heating of silicon-on-insulator (SOI) materials. The method exploits the temperature dependence of the reflectivity of SOI films to allow noncontact temperature measurement with high spatial and temporal resolution. This technique is of considerable practical importance for beam processing, since it allows the temperature distribution induced by a beam being scanned across a specimen to be determined. The temperature distribution produced by a line electron beam swept across a SOI specimen was experimentally measured and found to be consistent with a theoretical prediction. The TRR technique can also be used to study melting and will prove useful for characterizing zone melting recrystallization, where thermal modeling is often inadequate for the complex structures involved.

  16. Summary of the ECLOUD'04 Workshop

    SciTech Connect (OSTI)

    Macek, R.; Furman, M.

    2004-11-30T23:59:59.000Z

    The 31st ICFA Advanced Beam Dynamics Workshop on Electron-Cloud Effects ''ECLOUD'04'' was held April 19-23, 2004 at Napa, CA, USA. A broad range of current topics in this field were illuminated by 53 talks in 7 sessions plus 6 session summaries at the final summary session. These covered a variety of experimental methods and results, along with progress on understanding of the topic obtained from simulations and analytic theory, and evaluations of the effectiveness of various methods/mechanisms for mitigation of the adverse impact on accelerator performance. In addition, a panel discussion was held on ''Future Needs and Future Directions''. A summary of progress on the major themes covered at ECLOUD'04 is presented.

  17. ICAM Workshop | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    ICAM Workshop ICAM Workshop DOE ICAM Workshop 43.pdf More Documents & Publications Radio and Spectrum Management Ad Hoc Meetings PKI...

  18. Chirped-pulse manipulated carrier dynamics in low-temperature molecular-beam-epitaxy grown GaAs

    SciTech Connect (OSTI)

    Lee, Chao-Kuei, E-mail: chuckcklee@yahoo.com [Department of Photonics, National Sun-Yat-Sen University, Kaohsiung 80400, Taiwan (China); Lin, Yuan-Yao [Department of Electrical Engineering, Institute of Photonics Technologies, National Tsing Hua University, Hsinchu 30010, Taiwan (China); Lin, Sung-Hui [Department of Photonics, National Chiao Tung University, Hsinchu 30010, Taiwan (China); Lin, Gong-Ru [Department of Electrical Engineering, Graduate Institute of Photonics and Optoelectronics, National Taiwan University, No. 1, Roosevelt Road, Sec. 4, Taipei 10617, Taiwan (China); Pan, Ci-Ling [Department of Photonics, National Chiao Tung University, Hsinchu 30010, Taiwan (China); Department of Physics, National Tsing Hwa University, Hsinchu 30010, Taiwan (China)

    2014-04-28T23:59:59.000Z

    Chirped pulse controlled carrier dynamics in low-temperature molecular-beam-epitaxy grown GaAs are investigated by degenerate pump-probe technique. Varying the chirped condition of excited pulse from negative to positive increases the carrier relaxation time so as to modify the dispersion and reshape current pulse in time domain. The spectral dependence of carrier dynamics is analytically derived and explained by Shockley-Read Hall model. This observation enables the new feasibility of controlling carrier dynamics in ultrafast optical devices via the chirped pulse excitations.

  19. Benchmark of the IMPACT Code for High Intensity Beam DynamicsSimulation

    SciTech Connect (OSTI)

    Qiang, J.; Ryne, R.D.

    2006-11-16T23:59:59.000Z

    The IMPACT (Integrated Map and Particle Accelerator Tracking) code was first developed under Computational Grand Challenge project in the mid 1990s [1]. It started as a three-dimensional (3D) data parallel particle-in-cell (PIC) code written in High Performance Fortran. The code used a split-operator based method to solve the Hamiltonian equations of motion. It contained linear transfer maps for drifts, quadrupole magnets and rf cavities. The space-charge forces were calculated using an FFT-based method with 3D open boundary conditions and longitudinal periodic boundary conditions. This code was completely rewritten in the late 1990s based on a message passing parallel programming paradigm using Fortran 90 and MPI following an object-oriented software design. This improved the code's scalability on large parallel computer systems and also gave the code better software maintainability and extensibility [2]. In the following years, under the SciDAC-1 accelerator project, the code was extended to include more accelerating and focusing elements such as DTL, CCL, superconducting linac, solenoid, dipole, multipoles, and others. Besides the original split-operator based integrator, a direct integration of Lorentz equations of motion using a leap-frog algorithm was also added to the IMPACT code to handle arbitrary external nonlinear fields. This integrator can read in 3D electromagnetic fields in a Cartesian grid or in a cylindrical coordinate system. Using the Lorentz integrator, we also extended the original code to handle multiple charge-state beams. The space-charge solvers were also extended to include conducting wall effects for round and rectangular pipes with longitudinal open and periodic boundary conditions. Recently, it has also been extended to handle short-range wake fields (longitudinal monopole and transverse dipole) and longitudinal coherent synchrotron radiation wake fields. Besides the parallel macroparticle tracking code, an rf linac lattice design code, an envelope matching and analysis code, and a number of pre- and post-processing codes were also developed to form the IMPACT code suite. The IMPACT code suite has been used to study beam dynamics in the SNS linac, the J-PARC linac commissioning, the CERN superconducting linac design, the Los Alamos Low Energy Demonstration Accelerator (LEDA) halo experiment, the Rare Isotope Accelerator (RIA) driver linac design, and the FERMI{at}Elettra FEL linac design [3-8]. It has also been used to study space-charge resonance in anisotropic beams [9-11].

  20. Molecular Beam and Surface Science Studies of Heterogeneous Reaction Kinetics Including Combustion Dynamics. Final Technical Report.

    SciTech Connect (OSTI)

    Sibener, S. J.

    2006-06-23T23:59:59.000Z

    This research program examined the heterogeneous reaction kinetics and reaction dynamics of surface chemical processes which are of direct relevance to efficient energy production, condensed phase reactions, and mateials growth including nanoscience objectives. We have had several notable scientific and technical successes. Illustrative highlights include: (1) a thorough study of how one can efficiently produce synthesis gas (SynGas) at relatively low Rh(111) catalyst temperatures via the reaction CH{sub4}+1/2 O{sub2} {r_arrow} CO+2H{sub2}. In these studies methane activation is accomplished utilizing high-kinetic energy reagents generated via supersonic molecular beams, (2) experiments which have incisively probed the partial oxidation chemistry of adsorbed 1- and 2- butene on Rh and ice, as well as partial oxidation of propene on Au; (3) investigation of structural changes which occur to the reconstructed (23x{radical}3)-Au(111) surface upon exposure to atomic oxygen, (4) a combined experimental and theoretical examination of the fundamental atomic-level rules which govern defect minimization during the formation of self-organizing stepped nanostructures, (5) the use of these relatively defect-free nanotemplates for growing silicon nanowires having atomically-dimensioned widths, (6) a combined scanning probe and atomic beam scattering study of how the presence of self-assembling organic overlayers interact with metallic supports substrates - this work hs led to revision of the currently held view of how such adsorbates reconfigure surface structure at the atomic level, (7) an inelastic He atom scattering study in which we examined the effect of chain length on the low-energy vibrations of alkanethiol striped phase self-assembled monolayers on Au(111), yielding information on the forces that govern interfacial self-assembly, (8) a study of the vibrational properties of disordered films of SF{sub6} adsorbed on Au(111), and (9) a study of the activated chemistry and photochemistry of NO on NiO/Ni. Innovative STM and molecular beam instrumentation has been fabricated to enable this program.

  1. Workshop Registration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun1 TableContacts Workshop ContactsWorkshop

  2. Former BEAMS student revisits Jefferson Lab; sets goal on career...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Institute of Standards and Technology (NIST) intern and a former Jefferson Lab BEAMS participant, returned to JLab recently to take part in a National Educators' Workshop...

  3. Some notes on beam dynamics due to vertical oscillations in an all-electric storage ring

    E-Print Network [OSTI]

    Mane, S R

    2015-01-01T23:59:59.000Z

    A document has recently been posted on the arXiv [1], describing analytical formulas and results of particle tracking simulations, for precision tests of numerical integration algorithms for an EDM (electric dipole moment) storage ring. In the context of an all-electric storage ring, the authors cite theoretical formulas by Orlov [2]. However, the reference to Orlov is to a talk at a workshop in 2012, and is unpublished and difficult for independent researchers to access and validate. This note rederives and generalizes some of Orlov's principal results, using a Hamiltonian formalism, and also corrects some details in both Orlov's note [2] and the arXiv post [1].

  4. Relativistic nonlinear dynamics of an intense laser beam propagating in a hot electron-positron magnetoactive plasma

    SciTech Connect (OSTI)

    Sepehri Javan, N.; Adli, F. [Department of Physics, Faculty of Sciences, University of Mohaghegh Ardabili, P.O. Box 179, Ardabil 56199-11367 (Iran, Islamic Republic of)] [Department of Physics, Faculty of Sciences, University of Mohaghegh Ardabili, P.O. Box 179, Ardabil 56199-11367 (Iran, Islamic Republic of)

    2013-06-15T23:59:59.000Z

    The present study is devoted to investigation of the nonlinear dynamics of an intense laser beam interacting with a hot magnetized electron-positron plasma. Propagation of the intense circularly polarized laser beam along an external magnetic field is studied using a relativistic two-fluid model. A modified nonlinear Schrödinger equation is derived based on the quasi-neutral approximation, which is valid for hot plasma. Light envelope solitary waves and modulation instability are studied, for one-dimensional case. Using a three-dimensional model, spatial-temporal development of laser pulse is investigated. Occurrence of some nonlinear phenomena such as self-focusing, self-modulation, light trapping, and filamentation of laser pulse is discussed. Also the effect of external magnetic field and plasma temperature on the nonlinear evolution of these phenomena is studied.

  5. MICCAI 2006 Workshop Proceedings MFCA'06 workshop

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    MICCAI 2006 Workshop Proceedings MFCA'06 workshop October 1st , 2006, Copenhagen, Denmark. http://www-sop.inria.fr/asclepios/events/MFCA), Laurent Younes (John Hopkins University, USA). Organization MFCA-2006 is a satellite workshop of MICCAI 2006, held in Copenhagen on October 1st. Mathematical Foundations of Computational Anatomy (MFCA'06

  6. Neutrons for Catalysis: A Workshop on Neutron Scattering Techniques for Studies in Catalysis

    SciTech Connect (OSTI)

    Overbury, Steven {Steve} H [ORNL; Coates, Leighton [ORNL; Herwig, Kenneth W [ORNL; Kidder, Michelle [ORNL

    2011-10-01T23:59:59.000Z

    This report summarizes the Workshop on Neutron Scattering Techniques for Studies in Catalysis, held at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) on September 16 and 17, 2010. The goal of the Workshop was to bring experts in heterogeneous catalysis and biocatalysis together with neutron scattering experimenters to identify ways to attack new problems, especially Grand Challenge problems in catalysis, using neutron scattering. The Workshop locale was motivated by the neutron capabilities at ORNL, including the High Flux Isotope Reactor (HFIR) and the new and developing instrumentation at the SNS. Approximately 90 researchers met for 1 1/2 days with oral presentations and breakout sessions. Oral presentations were divided into five topical sessions aimed at a discussion of Grand Challenge problems in catalysis, dynamics studies, structure characterization, biocatalysis, and computational methods. Eleven internationally known invited experts spoke in these sessions. The Workshop was intended both to educate catalyst experts about the methods and possibilities of neutron methods and to educate the neutron community about the methods and scientific challenges in catalysis. Above all, it was intended to inspire new research ideas among the attendees. All attendees were asked to participate in one or more of three breakout sessions to share ideas and propose new experiments that could be performed using the ORNL neutron facilities. The Workshop was expected to lead to proposals for beam time at either the HFIR or the SNS; therefore, it was expected that each breakout session would identify a few experiments or proof-of-principle experiments and a leader who would pursue a proposal after the Workshop. Also, a refereed review article will be submitted to a prominent journal to present research and ideas illustrating the benefits and possibilities of neutron methods for catalysis research.

  7. Instrumentation and Beam Dynamics Study of Advanced Electron-Photon Facility in Indiana University

    SciTech Connect (OSTI)

    Luo, Tianhuan; /Indiana U.

    2011-08-01T23:59:59.000Z

    The Advanced eLectron-PHoton fAcility (ALPHA) is a compact electron accelerator under construction and being commissioned at the Indiana University Center for Exploration of Energy and Matter (CEEM). In this thesis, we have studied the refurbished Cooler Injector Synchrotron (CIS) RF cavity using both the transmission line model and SUPERFISH simulation. Both low power and high power RF measurements have been carried out to characterize the cavity. Considering the performance limit of ferrite, we have designed a new ferrite loaded, co-axial quarter wave like cavity with similar structure but a more suitable ferrite material. We have also designed a traveling wave stripline kicker for fast extraction by POISSON and Microwave Studio. The strips geometry is trimmed to maximize the uniformity of the kicking field and match the impedance of the power cables. The time response simulation shows the kicker is fast enough for machine operation. The pulsed power supply requirement has also been specified. For the beam diagnosis in the longitudinal direction, we use a wideband Wall Gap Monitor (WGM) served in CIS. With proper shielding and amplification to get good WGM signal, we have characterized the injected and extracted beam signal in single pass commissioning, and also verified the debunching effect of the ALPHA storage ring. A modulation-demodulation signal processing method is developed to measure the current and longitudinal profile of injected beam. By scanning the dipole strength in the injection line, we have reconstructed the tomography of the longitudinal phase space of the LINAC beam. In the accumulation mode, ALPHA will be operated under a low energy and high current condition, where intra beam scattering (IBS) becomes a dominant effect on the beam emittance. A self consistent simulation, including IBS effect, gas scattering and linear coupling, has been carried out to calculate the emittance of the stored beam.

  8. 2013 Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICS H. I.Plasma CampWorkshops banner Home Agenda

  9. Workshop Contacts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun1 TableContacts Workshop Contacts Questions?

  10. Workshop History

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun1 TableContacts Workshop Contacts

  11. Workshop Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout SRNL Home SRNL main campus Working withWorkshop Reports

  12. Non-adiabatic ab initio molecular dynamics of supersonic beam epitaxy of silicon carbide at room temperature

    SciTech Connect (OSTI)

    Taioli, Simone [Interdisciplinary Laboratory for Computational Science, FBK-Center for Materials and Microsystems and University of Trento, Trento (Italy); Department of Physics, University of Trento, Trento (Italy); Istituto Nazionale di Fisica Nucleare, Sezione di Perugia (Italy); Department of Chemistry, University of Bologna, Bologna (Italy); Garberoglio, Giovanni [Interdisciplinary Laboratory for Computational Science, FBK-Center for Materials and Microsystems and University of Trento, Trento (Italy); Simonucci, Stefano [Interdisciplinary Laboratory for Computational Science, FBK-Center for Materials and Microsystems and University of Trento, Trento (Italy); Istituto Nazionale di Fisica Nucleare, Sezione di Perugia (Italy); Department of Physics, University of Camerino, Camerino (Italy); Beccara, Silvio a [Interdisciplinary Laboratory for Computational Science, FBK-Center for Materials and Microsystems and University of Trento, Trento (Italy); Department of Physics, University of Trento, Trento (Italy); Aversa, Lucrezia [Institute of Materials for Electronics and Magnetism, IMEM-CNR, Trento (Italy); Nardi, Marco [Institute of Materials for Electronics and Magnetism, IMEM-CNR, Trento (Italy); Institut fuer Physik, Humboldt-Universitaet zu Berlin, Berlin (Germany); Verucchi, Roberto [Institute of Materials for Electronics and Magnetism, FBK-CNR, Trento (Italy); Iannotta, Salvatore [Institute of Materials for Electronics and Magnetism, IMEM-CNR, Parma (Italy); Dapor, Maurizio [Interdisciplinary Laboratory for Computational Science, FBK-Center for Materials and Microsystems and University of Trento, Trento (Italy); Department of Materials Engineering and Industrial Technologies, University of Trento, Trento (Italy); Istituto Nazionale di Fisica Nucleare, Sezione di Padova (Italy); and others

    2013-01-28T23:59:59.000Z

    In this work, we investigate the processes leading to the room-temperature growth of silicon carbide thin films by supersonic molecular beam epitaxy technique. We present experimental data showing that the collision of fullerene on a silicon surface induces strong chemical-physical perturbations and, for sufficient velocity, disruption of molecular bonds, and cage breaking with formation of nanostructures with different stoichiometric character. We show that in these out-of-equilibrium conditions, it is necessary to go beyond the standard implementations of density functional theory, as ab initio methods based on the Born-Oppenheimer approximation fail to capture the excited-state dynamics. In particular, we analyse the Si-C{sub 60} collision within the non-adiabatic nuclear dynamics framework, where stochastic hops occur between adiabatic surfaces calculated with time-dependent density functional theory. This theoretical description of the C{sub 60} impact on the Si surface is in good agreement with our experimental findings.

  13. Beam dynamics and wakefield suppression in interleaved damped and detuned structures for CLIC

    E-Print Network [OSTI]

    D'Elia, A; Khan, V F; Jones, R M; Latina, A; Nesmiyan, I; Riddone, G

    2013-01-01T23:59:59.000Z

    Acceleration of multiple bunches of charged particles in the main linacs of the Compact Linear Collider (CLIC) with high accelerating fields provides two major challenges: firstly, to ensure the surface electromagnetic fields do not cause electrical breakdown and subsequent surface damage, and secondly, to ensure the beam-excited wakefields are sufficiently suppressed to avoid appreciable emittance dilution. In the baseline design for CLIC, heavy wakefield suppression is used (Q ~ 10) [1] and this ensures the beam quality is well-preserved [2]. Here we discuss an alternative means to suppress the wakefield which relies on strong detuning of the cell dipole frequencies, together with moderate damping, effected by manifolds which are slot-coupled to each accelerating cell. This damped and detuned wakefield suppression scheme is based on the methodology developed for the Japanese Linear Collider/Next Linear Collider (JLC/NLC) [3]. Here we track the multi-bunch beam down the complete collider, u...

  14. Prediction of the dynamic response of composite sandwich beams under shock loading

    E-Print Network [OSTI]

    Fleck, Norman A.

    reported measured response of end-clamped sandwich beams, made from face sheets of glass fibre reinforced vinyl ester and a core of PVC foam or balsa wood (Tagarielli V.L., Deshpande V.S. and Fleck N core, such as polymer foams or balsa wood, are extensively employed in marine structures

  15. LCLS-II New Instruments Workshops Report

    SciTech Connect (OSTI)

    Baradaran, Samira; Bergmann, Uwe; Durr, Herrmann; Gaffney, Kelley; Goldstein, Julia; Guehr, Markus; Hastings, Jerome; Heimann, Philip; Lee, Richard; Seibert, Marvin; Stohr, Joachim; /SLAC; ,

    2012-08-08T23:59:59.000Z

    The LCLS-II New Instruments workshops chaired by Phil Heimann and Jerry Hastings were held on March 19-22, 2012 at the SLAC National Accelerator Laboratory. The goal of the workshops was to identify the most exciting science and corresponding parameters which will help define the LCLS-II instrumentation. This report gives a synopsis of the proposed investigations and an account of the workshop. Scientists from around the world have provided short descriptions of the scientific opportunities they envision at LCLS-II. The workshops focused on four broadly defined science areas: biology, materials sciences, chemistry and atomic, molecular and optical physics (AMO). Below we summarize the identified science opportunities in the four areas. The frontiers of structural biology lie in solving the structures of large macromolecular biological systems. Most large protein assemblies are inherently difficult to crystallize due to their numerous degrees of freedom. Serial femtosecond protein nanocrystallography, using the 'diffraction-before-destruction' approach to outrun radiation damage has been very successfully pioneered at LCLS and diffraction patterns were obtained from some of the smallest protein crystals ever. The combination of femtosecond x-ray pulses of high intensity and nanosized protein crystals avoids the radiation damage encountered by conventional x-ray crystallography with focused beams and opens the door for atomic structure determinations of the previously largely inaccessible class of membrane proteins that are notoriously difficult to crystallize. The obtained structures will allow the identification of key protein functions and help in understanding the origin and control of diseases. Three dimensional coherent x-ray imaging at somewhat lower resolution may be used for larger objects such as viruses. The chemistry research areas of primary focus are the predictive understanding of catalytic mechanisms, with particular emphasis on photo- and heterogeneous catalysis. Of particular interest is the efficient conversion of light to electrical or chemical energy, which requires understanding the non-adiabatic dynamics of electronic excited states. Ultrafast x-ray scattering presents an excellent opportunity to investigate structural dynamics of molecular systems with atomic resolution, and x-ray scattering and spectroscopy present an excellent opportunity to investigating the dynamics of the electronic charge distribution. Harnessing solar energy to generate fuels, either indirectly with photovoltaics and electrochemical catalysis or directly with photocatalysts, presents a critical technological challenge that will require the use of forefront scientific tools such as ultrafast x-rays. At the center of this technical challenge is the rational design of efficient and cost effective catalysts. Important materials science opportunities relate to information technology applications, in particular the transport and storage of information on increasingly smaller length- and faster time-scales. Of interest are the understanding of the intrinsic size limits associated with the storage of information bits and the speed limits of information or bit processing. Key questions revolve about how electronic charges and spins of materials can be manipulated by electric and magnetic fields. This requires the exploration of speed limits subject to the fundamental conservation laws of energy and linear and angular momentum and the different coupling of polar electric and axial magnetic fields to charge and spin. Of interest are novel composite materials, including molecular systems combining multi electric and magnetic functionality. Ultrafast x-rays offer the required probing speed, can probe either the charge or spin properties through polarization control and through scattering and spectroscopy cover the entire energy-time-momentum-distance phase space. In the field of atomic and molecular science, LCLS II promises to elucidate the fundamental interactions among electrons and between electrons and nuclei, and to explore the fron

  16. 2-D Modeling of Energy-z Beam Dynamics Using the LiTrack Matlab Program

    SciTech Connect (OSTI)

    Cauley, S.K.; /Unlisted; Woods, M.; /SLAC

    2005-12-15T23:59:59.000Z

    Short bunches and the bunch length distribution have important consequences for both the LCLS project at SLAC and the proposed ILC project. For both these projects, it is important to simulate what bunch length distributions are expected and then to perform actual measurements. The goal of the research is to determine the sensitivity of the bunch length distribution to accelerator phase and voltage. This then indicates the level of control and stability that is needed. In this project I simulated beamlines to find the rms bunch length in three different beam lines at SLAC, which are the test beam to End Station A (ILC-ESA) for the ILC studies, Linac Coherent Light Source (LCLS) and LCLS-ESA. To simulate the beamlines, I used the LiTrack program, which does a 2-dimensional tracking of an electron bunch's longitudinal (z) and the energy spread beam (E) parameters. In order to reduce the time of processing the information, I developed a small program to loop over adjustable machine parameters. LiTrack is a Matlab script and Matlab is also used for plotting and saving and loading files. The results show that the LCLS in Linac-A is the most sensitive when looking at the ratio of change in phase degree to rate of change. The results also show a noticeable difference between the LCLS and LCLS-ESA, which suggest that further testing should go into looking the Beam Switch Yard and End Station A to determine why the result of the LCLS and LCLS-ESA vary.

  17. Transportation and Stationary Power Integration: Workshop Proceedings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integration: Workshop Proceedings Transportation and Stationary Power Integration: Workshop Proceedings Proceedings for the Transportation and Stationary Power Integration Workshop...

  18. Quadrennial Technology Review Workshop Portfolios | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Review Workshop Portfolios Quadrennial Technology Review Workshop Portfolios Department of Energy Quadrennial Technology Review Building & Industrial Efficiency Workshop...

  19. Quadrennial Technology Review Workshops | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Workshops Quadrennial Technology Review Workshops Department of Energy Quadrennial Technology Review Building & Industrial Efficiency Workshop Department of Energy Quadrennial...

  20. Neutron Physics at NIST 8th UCN Workshop

    E-Print Network [OSTI]

    Titov, Anatoly

    Neutron Physics at NIST M. Arif 8th UCN Workshop St. Petersburg ­ Moscow, Russia June 11-21, 2011 #12;NCNR Guide Hall 20 MW Reactor #12;Neutron Physics at the NCNR Beam Flux n cm-2 s-1 Peak Wavelength-6 Experiments Beam Neutron Lifetime Testing Time Reversal Asymmetry (emiT) Testing Parity Violating

  1. International Workshop SMART MATERIALS, STRUCTURES & NDT in AEROSPACE

    E-Print Network [OSTI]

    Yaman, Yavuz

    International Workshop SMART MATERIALS, STRUCTURES & NDT in AEROSPACE Conference NDT in Canada 2011 FRACTIONAL CONTROLLER FOR THE VIBRATION SUPPRESSION OF A SMART BEAM Cem ONAT1 , Melin SAHIN 2 , Yavuz YAMAN3 controller is designed for the suppression of the flexural vibrations of a smart beam. The designed

  2. Alaska Workshop: Workforce Development

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy Office of Indian Energy is hosting two workshops at the Alaska Village Initiatives Rural Small Business Conference on Wednesday, February 12, 2014. Each workshop will...

  3. IPHE Infrastructure Workshop Proceedings

    Fuel Cell Technologies Publication and Product Library (EERE)

    This proceedings contains information from the IPHE Infrastructure Workshop, a two-day interactive workshop held on February 25-26, 2010, to explore the market implementation needs for hydrogen fuelin

  4. Workshop introduction

    SciTech Connect (OSTI)

    Streeper, Charles [Los Alamos National Laboratory

    2010-01-01T23:59:59.000Z

    The Department of Energy's National Nuclear Security Administration's Global Threat Reduction Initiative (GTRI) has three subprograms that directly reduce the nuclear/radiological threat; Convert (Highly Enriched Uranium), Protect (Facilities), and Remove (Materials). The primary mission of the Off-Site Source Recovery Project (OSRP) falls under the 'Remove' subset. The purpose of this workshop is to provide a venue for joint-technical collaboration between the OSRP and the Nuclear Radiation Safety Service (NRSS). Eisenhower's Atoms for Peace initiative and the Soviet equivalent both promoted the spread of the paradoxical (peaceful and harmful) properties of the atom. The focus of nonproliferation efforts has been rightly dedicated to fissile materials and the threat they pose. Continued emphasis on radioactive materials must also be encouraged. An unquantifiable threat still exists in the prolific quantity of sealed radioactive sources (sources) spread worldwide. It does not appear that the momentum of the evolution in the numerous beneficial applications of radioactive sources will subside in the near future. Numerous expert studies have demonstrated the potentially devastating economic and psychological impacts of terrorist use of a radiological dispersal or emitting device. The development of such a weapon, from the acquisition of the material to the technical knowledge needed to develop and use it, is straightforward. There are many documented accounts worldwide of accidental and purposeful diversions of radioactive materials from regulatory control. The burden of securing sealed sources often falls upon the source owner, who may not have a disposal pathway once the source reaches the end of its useful life. This disposal problem is exacerbated by some source owners not having the resources to safely and compliantly store them. US Nuclear Regulatory Commission (NRC) data suggests that, in the US alone, there are tens of thousands of high-activity (IAEA Category I and II) sources in thousands of devices; and there are many more tens of thousands of smaller sources scattered among thousands of other NRC licensees. As a result of the ubiquitous nature and undeterminable number of current and legacy sources, even in developed countries they can be abandoned, disposed of in a haphazard manner, lost, stolen, and/or otherwise fallout of regulatory control. Supply and demand of sources, being market based, is more or less fluid. Normative security of radioactive sources exists, but varies in each country, and is loosely implemented through non-legally binding recommendations and standards provided by International Atomic Energy Agency technical documents and cooperation and through bilateral efforts such as this workshop where we share best-practices with one another. Much of the reason for the difficulty in securing sealed sources rests in the enormous need for their beneficial applications in the medical, industrial, and agricultural sectors. Alternative technologies to replace high-risk sources continue to be explored, but very few of these alternative solutions have reached the development stage for common usage and distribution. The beneficial uses of sources must be allowed to continue; however, to minimize the potential for their misuse, current controls and regulating mechanisms must be constantly evaluated to ensure the benefits gained outweigh potential risks. From a global perspective, an evaluation and modification of requirements over the entire life cycle of sources from their manufacture to their final disposition is required. The proper removal and disposal of vulnerable disused or orphan sources is essential to maintaining a safe operating environment. One of our goals in this workshop is to share our methodologies for recovering sources and learn how they differ or are similar to the challenges faced in recovering, storing, and disposing of sources in the Republic of Georgia . The suggestions we will make are flexible in allowing for the imperfect situations and capabilities we have all encountered in sour

  5. Membrane Technology Workshop

    Broader source: Energy.gov [DOE]

    Presentation by Charles Page (Air Products & Chemicals, Inc.) for the Membrane Technology Workshop held July 24, 2012

  6. GTT Tranmission Workshop- Documents

    Broader source: Energy.gov [DOE]

    Use the links below to download documents from the GTT Transmission Workshop, held November 1-2, 2012.

  7. The Mission and Technology of a Gas Dynamic Trap Neutron Source for Fusion Material and Component Testing and Qualification

    SciTech Connect (OSTI)

    Molvik, A W; Simonen, T C

    2009-07-17T23:59:59.000Z

    This report summarizes discussions and conclusions of the workshop to 'Assess The Mission and Technology of a Gas Dynamic Trap Neutron Source for Fusion Material and Component Testing and Qualification'. The workshop was held at LBNL, Berkeley, CA on March 12, 2009. Most workshop attendees have worked on magnetic mirror systems, several have worked on similar neutron source designs, and others are knowledgeable of materials, fusion component, and neutral beams The workshop focused on the gas dynamic trap DT Neutron Source (DTNS) concept being developed at the Budker Institute of Nuclear Physics (BINP) in Novosibirsk, Russia. The DTNS may be described as a line source of neutrons, in contrast to a spallation or a D-Lithium source with neutrons beaming from a point, or a tokamak volume source. The DTNS is a neutral beam driven linear plasma system with magnetic mirrors to confine the energetic deuterium and tritium beam injected ions, which produce the 14 MeV neutrons. The hot ions are imbedded in warm-background plasma, which traps the neutral atoms and provides both MHD and micro stability to the plasma. The 14 MeV neutron flux ranges typically at the level of 1 to 4 MW/m2.

  8. Beam energy dependence of the expansion dynamics in relativistic heavy ion collisions: Indications for the critical end point?

    E-Print Network [OSTI]

    Roy A. Lacey

    2014-08-06T23:59:59.000Z

    The flow harmonic $v_{n}$ and the emission source radii $R_{\\text{out}}$, $R_{\\text{side}}$ and $R_{\\text{long}}$ are studied for a broad range of centrality selections and beam collision energies in Au+Au ($\\sqrt{s_{NN}}= 7.7 - 200$ GeV) and Pb+Pb ($\\sqrt{s_{NN}}= 2.76$ TeV) collisions at RHIC and the LHC respectively. They validate the acoustic scaling patterns expected for hydrodynamic-like expansion over the entire range of beam energies studied. The combined data sets allow estimates for the \\sqsn\\ dependence of the mean expansion speed $\\left$, emission duration $\\left$ and the viscous coefficients $\\left$ that encode the magnitude of the specific shear viscosity $\\left$. The estimates indicate initial-state model independent values of $\\left$ which are larger for the plasma produced at 2.76 TeV (LHC) compared to that produced at 200 GeV (RHIC) ($\\left_{\\text{LHC}}=2.2\\pm 0.2$ and $\\left_{\\text{RHIC}}=1.3\\pm 0.2$). They also show a non-monotonic \\sqsn\\ dependence for $\\left$, $\\left$ and $\\left$, with minima for $\\left$ and $\\left$, and a complimentary maximum for $\\left$. These dependencies signal a significant change in reaction dynamics in a narrow span of $\\sqrt{s_{NN}}$, which may be linked to reaction trajectories close to the critical end point (CEP) in the phase diagram for nuclear matter.

  9. Beam dynamics study of a 30?MeV electron linear accelerator to drive a neutron source

    SciTech Connect (OSTI)

    Kumar, Sandeep; Yang, Haeryong; Kang, Heung-Sik, E-mail: hskang@postech.ac.kr [Pohang Accelerator Laboratory, San31, Hyoja-dong, Pohang, Gyeongbuk 790-784 (Korea, Republic of)

    2014-02-14T23:59:59.000Z

    An experimental neutron facility based on 32?MeV/18.47?kW electron linac has been studied by means of PARMELA simulation code. Beam dynamics study for a traveling wave constant gradient electron accelerator is carried out to reach the preferential operation parameters (E?=?30?MeV, P?=?18?kW, dE/E?beam energy is obtained at the end of the linac. As high electron energy is required to produce acceptable neutron flux. The final neutron flux is estimated to be 5?×?10{sup 11}?n/cm{sup 2}/s/mA. Future development will be the real design of a 30?MeV electron linac based on S band traveling wave.

  10. Climate Change Workshop 2007

    E-Print Network [OSTI]

    Nebraska-Lincoln, University of

    1 Climate Change Workshop 2007 Adaptive Management and Resilience Relevant for the Platte River, UNL Climate Change Workshop 2007 · Resilience ·Why it matters · Adaptive Management ·How it helps ·Adaptive Capacity · What it is Overview Climate Change Workshop 2007 "A public Domain, once a velvet carpet

  11. WAKE-FIELDS AND BEAM DYNAMICS SIMULATIONS C.J. Glasman & R.M. Jones; Cockcroft Institute, Daresbury, WA4 4AD, UK;

    E-Print Network [OSTI]

    /m and is known as the baseline configura- tion document (BCD). However, here we investigate the electromagnetic simulated in detail using paral- lel finite difference and finite element codes [7, 8] and this data has been used as input for beam dynamics simulations, using the code LIAR [9], which tracks multi

  12. R&D ERL: Beam dynamics, parameters, and physics to be learned

    SciTech Connect (OSTI)

    Kayran, D.

    2010-02-01T23:59:59.000Z

    The R&D ERL facility at BNL aims to demonstrate CW operation of ERL with average beam current in the range of 0.1-1 ampere, combined with very high efficiency of energy recovery. The ERL is being installed in one of the spacious bays in Bldg. 912 of the RHIC/AGS complex (Fig. 1). The bay is equipped with an overhead crane. The facility has a control room, two service rooms and a shielded ERL cave. The control room is located outside of the bay in a separate building. The single story house is used for a high voltage power supply for 1 MW klystron. The two-story unit houses a laser room, the CW 1 MW klystron with its accessories, most of the power supplies and electronics. The ERL R&D program has been started by the Collider Accelerator Department (C-AD) at BNL as an important stepping-stone for 10-fold increase of the luminosity of the Relativistic Heavy Ion Collider (RHIC) using relativistic electron cooling of gold ion beams with energy of 100 GeV per nucleon. Furthermore, the ERL R&D program extends toward a possibility of using 10-20 GeV ERL for future electron-hadron/heavy ion collider, MeRHIC/eRHIC. These projects are the driving force behind the development of ampere-class ERL technology, which will find many applications including light sources and FELs. The intensive R&D program geared towards the construction of the prototype ERL is under way: from development of high efficiency photo-cathodes to the development of new merging system compatible with emittance compensation.

  13. Grid Transformation Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3-03-Grid-Transformation-Workshop Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects &...

  14. ORNL Workshop on Plasma-Surface Interactions for Fusion Oak Ridge, Tennessee, March 2123, 2005.

    E-Print Network [OSTI]

    Princeton Plasma Physics Laboratory

    at experience and lessons learned in other fields when considering workshop goal "to suggest most important next Flux Beam Reactor once the premier source for neutron science, is undergoing decommissioning Cassinni

  15. QTR Cornerstone Workshop

    Broader source: Energy.gov [DOE]

    Tthe Office of the Under Secretary for Science and Energy is hosting a workshop to gain input from leaders in academia, industry, and government. At the workshop, we will explore technology opportunities across the energy spectrum—ranging from power generation to advanced fuels to next generation manufacturing.

  16. Workshop on Composition Languages

    E-Print Network [OSTI]

    Schneider, Jean-Guy

    European Conference on Object-Oriented Programming #12;#12;Workshop on Composition Languages (WCL 2002 and Thomas Genssler Co-located with the 16th European Conference on Object-Oriented Programming #12;Copyright in Malaga, Spain on June 11, 2002. The workshop was affiliated with the 16th European Conference on Object

  17. National Electric Transmission Congestion Study Workshops | Department...

    Broader source: Energy.gov (indexed) [DOE]

    National Electric Transmission Congestion Study Workshops National Electric Transmission Congestion Study Workshops DOE hosted four regional pre-study workshops to receive input...

  18. Critical Materials Workshop Plenary Session Videos | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Critical Materials Workshop Plenary Session Videos Critical Materials Workshop Plenary Session Videos Welcome and Overview of Workshop and Energy Innovation Hubs Speakers * Dr. Leo...

  19. PHYSICAL REVIEW SPECIAL TOPICS -ACCELERATORS AND BEAMS, VOLUME 2, 114001 (1999) Higher-order effects in polarized proton dynamics

    E-Print Network [OSTI]

    Hoffstaetter, Georg

    PHYSICAL REVIEW SPECIAL TOPICS - ACCELERATORS AND BEAMS, VOLUME 2, 114001 (1999) Higher accelerated to energies higher than 25 GeV. During the acceleration process, the beam polarization is quite undisturbed, when the accelerator is well adjusted, except at first-order depolarizing spin orbit resonances

  20. Transportation Management Workshop: Proceedings

    SciTech Connect (OSTI)

    Not Available

    1993-10-01T23:59:59.000Z

    This report is a compilation of discussions presented at the Transportation Management Workshop held in Gaithersburg, Maryland. Topics include waste packaging, personnel training, robotics, transportation routing, certification, containers, and waste classification.

  1. NWHA Fall Workshop & Tour

    Broader source: Energy.gov [DOE]

    This year’s Fall Regional Workshop on October 30 will focus on extending the longevity of our legacy hydropower projects through upgrades, refurbishment and life extensions, while meeting needs of...

  2. Membrane Technology Workshop

    Broader source: Energy.gov [DOE]

    At the Membrane Technology Workshop (held July 24, 2012, in Rosemont, IL), stakeholders from industry and academia explored the status of membrane research and development (R&D). Participants ...

  3. Multimaterial Joining Workshop

    Broader source: Energy.gov [DOE]

    At the Multimaterial Joining Workshop (held in Chicago, IL, on July 23, 2012), subject matter experts from industry and academia described their views on state-of-the-art technologies, opportuniti...

  4. Critical Materials Workshop

    Broader source: Energy.gov [DOE]

    AMO hosted a public workshop on Tuesday, April 3, 2012 in Arlington, VA to provide background information on critical materials assessment, the current research within DOE related to critical...

  5. Sustainable Nanomaterials Workshop

    Broader source: Energy.gov [DOE]

    The Sustainable Nanomaterials Workshop (held in Washington, D.C., on June 26, 2012) gathered stakeholders from industry and academia to discuss the current state of the art for sustainable nanomat...

  6. International Hydrogen Infrastructure Challenges Workshop Summary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Hydrogen Infrastructure Challenges Workshop Summary - NOW, NEDO, and DOE International Hydrogen Infrastructure Challenges Workshop Summary - NOW, NEDO, and DOE...

  7. SSL R&D Workshop

    Broader source: Energy.gov [DOE]

    SSL R&D Workshop – January 27-29The 2015 R&D workshop will blend discussions on SSL research, product development, and manufacturing R&D needs into one "meeting of the minds" to...

  8. Hydrogen Technology Education Workshop Proceedings

    Fuel Cell Technologies Publication and Product Library (EERE)

    This document outlines activities for educating key target audiences, as suggested by workshop participants. Held December 4-5, 2002, the Hydrogen Technology Education Workshop kicked off a new educat

  9. Next Generation Light Source Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Next Generation Light Source Workshops A series of workshops will be held in late August with the goal of refining the scientific drivers for the facility and translating the...

  10. 1st International Workshop on High Performance Computing, Networking and Analytics for the Power Grid

    E-Print Network [OSTI]

    1st International Workshop on High Performance Computing, Networking and Analytics for the Power Transient Stability" #12;1st International Workshop on High Performance Computing, Networking and Analytics (University of Vermont). "Developing a Dynamic Model of Cascading Failure for High Performance Computing using

  11. Proceedings: Heat exchanger workshop

    SciTech Connect (OSTI)

    Not Available

    1987-07-01T23:59:59.000Z

    Heat transfer processes are of controlling importance in the operation of a thermal power plant. Heat exchangers are major cost items and are an important source of problems causing poor power plant availability and performance. A workshop to examine the improvements that can be made to heat exchangers was sponsored by the Electric Power Research Institute (EPRI) on June 10-11, 1986, in Palo Alto, California. This workshop was attended by 25 engineers and scientists representing EPRI-member utilities and EPRI consultants. A forum was provided for discussions related to the design, operation and maintenance of utility heat transfer equipment. The specific objectives were to identify research directions that could significantly improve heat exchanger performance, reliability and life cycle economics. Since there is a great diversity of utility heat transfer equipment in use, this workshop addressed two equipment categories: Boiler Feedwater Heaters (FWH) and Heat Recovery Steam Generators (HRSG). The workshop was divided into the following panel sessions: functional design, mechanical design, operation, suggested research topics, and prioritization. Each panel session began with short presentations by experts on the subject and followed by discussions by the attendees. This report documents the proceedings of the workshop and contains recommendations of potentially valuable areas of research and development. 4 figs.

  12. A dynamic focusing x-ray monochromator for a wiggler beam line at the SRS of the SERC Daresbury Laboratory

    SciTech Connect (OSTI)

    De Bruijn, D.; Van Zuylen, P. (TNO Institute of Applied Physics, P.O. Box 155, 2600 AD Delft (Netherlands)); Kruizinga, G. (Netherlands Organization for Scientific Research (NWO), P.O. Box 93138, 2509 AC Den Haag (Netherlands) State University of Utrecht, Sorbonnelaan 16, 3508 TB Utrecht (Netherlands))

    1992-01-01T23:59:59.000Z

    A Si(220) double-crystal monochromator for the energy range 10--30 keV is presented. It will be used for EXAFS as well as powder diffraction measurements. To determine the requirements for this monochromator we looked, apart from mean considerations, at the requirements dictated by EXAFS in transmission mode. For good data analyses the proper shape, amplitude, and location at the energy axis of each wiggle is required. Moreover it is essential to separate the wiggles from background and noise. For the latter a high flux through the sample is desirable, which can be achieved by horizontal focusing of the beam. For that we have chosen to bend the second crystal sagitally. The sagittal bending radius is adjustable between 50 and 0.8 m, because for different energies different sagittal radii are necessary to focus the beam on the sample. The mean meridional radius of the second crystal is fixed at 130 m, which is an optimization for 20 keV. The meridional radius of the first crystal can be tuned between 100 and 500 m. When this radius is set to 130 m the energy resolution is calculated to be 6, 3, and 35 eV for 10, 20, and 30 keV (for perfectly bent crystals). By changing the meridional radius of the first crystal, future users of this monochromator can make the trade off between resolution and intensity. Movement of the monochromator exit beam, during a scan, will occur due to the monochromator geometry, but is reduced as much as possible by using an asymmetrically cut second crystal, with an asymmetry angle of 2.5{degree}. The average exit beam movement of the monochromator for a 1-keV scan is 20 {mu}m. For 40% of the energy range (10--30 keV) the exit beam position remains within 10 {mu}m. For the second crystal no translation stage is used.

  13. Final Scientific EFNUDAT Workshop

    ScienceCinema (OSTI)

    None

    2011-10-06T23:59:59.000Z

    The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive.EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluationCross section measurementsExperimental techniquesUncertainties and covariancesFission propertiesCurrent and future facilities  International Advisory Committee: C. Barreau (CENBG, France)T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany)R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco CalvianiSamuel AndriamonjeEric BerthoumieuxCarlos GuerreroRoberto LositoVasilis Vlachoudis Workshop Assistant: Géraldine Jean

  14. Report of the DOE-DOE Workshop on Fuel Cells in Aviation: Workshop...

    Broader source: Energy.gov (indexed) [DOE]

    Report of the DOE-DOE Workshop on Fuel Cells in Aviation: Workshop Summary and Action Plan Report of the DOE-DOE Workshop on Fuel Cells in Aviation: Workshop Summary and Action...

  15. Workshops | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen Owned SmallOf TheViolations |Join the ChallengeWorkshop on CondensingWorkshops

  16. Proceedings of the international workshop on hadron facility technology

    SciTech Connect (OSTI)

    Thiessen, H.A. (comp.)

    1987-12-01T23:59:59.000Z

    The conference included papers on facility plans, beam dynamics, accelerator hardware, and experimental facilities. Individual abstracts were prepared for 43 papers in the conference proceedings. (LEW)

  17. International Snow Science Workshop Grenoble Chamonix Mont-Blanc -2013 Why don't avalanche-dynamics models of higher complexity necessarily

    E-Print Network [OSTI]

    Lenstra, Arjen K.

    -dynamics models of higher complexity necessarily lead to better predictions? Christophe Ancey École Polytechnique worldwide. Paradoxically, the substantial increase in model complexity can lead us to lose sight of the empirical nature of the assumptions used to build the models. Human expertise should still be of paramount

  18. National Postirradiation Examination Workshop Report

    SciTech Connect (OSTI)

    Schulthess, Jason L

    2011-06-01T23:59:59.000Z

    A National Post-Irradiation-Examination (PIE) Workshop was held March 29-30, 2011, in Washington D.C., stimulated by the DOE Acting Assistant Secretary for Nuclear Energy approval on January 31, 2011 of the “Mission Need Statement for Advanced Post-Irradiation Examination Capability”. As stated in the Mission Need, “A better understanding of nuclear fuels and material performance in the nuclear environment, at the nanoscale and lower, is critical to the development of innovative fuels and materials required for tomorrow’s nuclear energy systems.” (2011) Developing an advanced post-irradiation capability is the most important thing we can do to advance nuclear energy as an option to meeting national energy goals. Understanding the behavior of fuels and materials in a nuclear reactor irradiation environment is the limiting factor in nuclear plant safety, longevity, efficiency, and economics. The National PIE Workshop is part of fulfilling or addressing Department of Energy (DOE) missions in safe and publically acceptable nuclear energy. Several presentations were given during the opening of the workshop. Generally speaking, these presentations established that we cannot continue to rely on others in the world to provide the capabilities we need to move forward with nuclear energy technology. These presentations also generally identified the need for increased microstructural understanding of fuels and materials to be coupled with modeling and simulation, and increased accessibility and infrastructure to facilitate the interaction between national laboratories and participating organizations. The overall results of the work of the presenters and panels was distilled into four primary needs 1. Understanding material changes in the extreme nuclear environment at the nanoscale. Nanoscale studies have significant importance due to the mechanisms that cause materials to degrade, which actually occur on the nanoscale. 2. Enabling additional proficiency in experimentation and analysis through robust modeling coupled with advanced characterization. 3. Advancing the infrastructure and accessibility of physical and administrative systems needed to meet the needs of participating organizations that are subject to different time cycles and constraints that make working and collaborating the national laboratories challenging. 4. Pursuing in-situ analysis and instrumentation to support the examination of dynamic changes to materials’ microstructure, deformation, and surface effects as they occur with time scales rather than the static comparison offered by current PIE methods. This Workshop Report responds to the research challenges for advanced/future PIE needs for nuclear materials development outlined by Energy Secretary Chu and the DOE-NE Research and Development Roadmap report, which was delivered to Congress in April 2010, (DOE-NE, 2010) by identifying the technial needs for fuel and material development specifically related to PIE. The information from the panels address these research challenges by identifying specific needs related to each of the topical areas. The focus of the Workshop was to identify gaps in the enabling capabilities for nuclear energy research and to identify high-priority fundamental capabilities to enable research to be completed that would likely have high impact on enabling nuclear energy as a significant contributor to energy production portfolios.

  19. Eurocontrol Workshop Dec , 2008

    E-Print Network [OSTI]

    Flener, Pierre

    Chilled products ­ Piles of cartons Fresh fruits 1. Carton alignment for unrestricted air flow 2 practices · Dangerous products · Pharmaceutical products · Air cargo theft Manifest · Detailed loading plan Including Air Traffic Abder AGGOUN abder.aggoun@klsoptim.com #12;Eurocontrol Workshop ­ Dec , 2008 Packing

  20. Radiation Source Replacement Workshop

    SciTech Connect (OSTI)

    Griffin, Jeffrey W.; Moran, Traci L.; Bond, Leonard J.

    2010-12-01T23:59:59.000Z

    This report summarizes a Radiation Source Replacement Workshop in Houston Texas on October 27-28, 2010, which provided a forum for industry and researchers to exchange information and to discuss the issues relating to replacement of AmBe, and potentially other isotope sources used in well logging.

  1. Flywheel energy storage workshop

    SciTech Connect (OSTI)

    O`Kain, D.; Carmack, J. [comps.

    1995-12-31T23:59:59.000Z

    Since the November 1993 Flywheel Workshop, there has been a major surge of interest in Flywheel Energy Storage. Numerous flywheel programs have been funded by the Advanced Research Projects Agency (ARPA), by the Department of Energy (DOE) through the Hybrid Vehicle Program, and by private investment. Several new prototype systems have been built and are being tested. The operational performance characteristics of flywheel energy storage are being recognized as attractive for a number of potential applications. Programs are underway to develop flywheels for cars, buses, boats, trains, satellites, and for electric utility applications such as power quality, uninterruptible power supplies, and load leveling. With the tremendous amount of flywheel activity during the last two years, this workshop should again provide an excellent opportunity for presentation of new information. This workshop is jointly sponsored by ARPA and DOE to provide a review of the status of current flywheel programs and to provide a forum for presentation of new flywheel technology. Technology areas of interest include flywheel applications, flywheel systems, design, materials, fabrication, assembly, safety & containment, ball bearings, magnetic bearings, motor/generators, power electronics, mounting systems, test procedures, and systems integration. Information from the workshop will help guide ARPA & DOE planning for future flywheel programs. This document is comprised of detailed viewgraphs.

  2. WORKSHOP ON CONSTRUCTION ENGINEERING

    E-Print Network [OSTI]

    Tommelein, Iris D.

    WORKSHOP ON CONSTRUCTION ENGINEERING BASIC RESEARCH Final Report Robert I. Carr William F. Maloney September, 1982 THE UNIVERSITY OF MICHIGAN DEPARTMENT OF CIVIL ENGINEERING CONSTRUCTION ENGINEERING on Construction Engineering Basic Research Final Report Held at The University of Michigan Ann Arbor, Michigan May

  3. Proceedings IEA Workshop Legionella

    E-Print Network [OSTI]

    be not less than 60°C. 95% of thermal Solar panels sys- tems are both for hot water and for water heating it is the heated water which is accumulated. There has not been any known case of Legionellosis in Thermal Solar of the workshop is to investigate the risk of bacterial growth in solar water heaters and the risk of Legionnaire

  4. Workshop on Composition Languages

    E-Print Network [OSTI]

    Schneider, Jean-Guy

    Lumpe Co-located with the 8th European Software Engineering Conference and the 9th ACM SIGSOFT Symposium by Jean-Guy Schneider and Markus Lumpe Co-located with the 8th European Software Engineering Conference and the 9th ACM SIGSOFT Symposium on the Foundations of Software Engineering #12;#12;Workshop on Composition

  5. 2014 AAGEN Leadership Workshop | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    2014 AAGEN Leadership Workshop 2014 AAGEN Leadership Workshop 2014 AAGEN Leadership Workshop June 5, 2014 11:30AM EDT to June 6, 2014 1:15AM EDT Crystal City Doubletree Hotel, 300...

  6. Detailed dynamics of electron beams self-trapped and accelerated in a self-modulated laser wakefield

    E-Print Network [OSTI]

    Umstadter, Donald

    . These features are explained by analysis and test particle simulations of electron dynamics during acceleration wave,1 such as the plasma wakefield accel- erator, the plasma beat-wave accelerator, the Laser Wake the linear dephasing limit, and explained it, using Particle-In-Cell PIC simulations, as a result

  7. Second IEEE Workshop on Agile Cooperative Process-Aware Information Systems (ProGility 2007) -Workshop Report

    E-Print Network [OSTI]

    Ulm, Universität

    Second IEEE Workshop on Agile Cooperative Process-Aware Information Systems (ProGility 2007 an interest in agile cooperative process-aware information systems. The vision is to be able to rapidly im with each other in networks that are dynamic, flex- ible, ad-hoc, and adaptive. Thus enterprises are develop

  8. 2012 Microgrid Workshop Summary Released

    Broader source: Energy.gov [DOE]

    The Department of Energy has released the summary report from the July 30-31, 2012 Microgrid Workshop presented by the Office of Electricity Delivery and Energy Reliability at the Illinois Institute of Technology in Chicago. The workshop was held in response to discussions at the preceding DOE Microgrid Workshop, held in August 2011, which called for sharing lessons learned and best practices for system integration from existing projects in the U.S. (including military microgrids) and internationally.

  9. Transportation and Stationary Power Integration Workshop Session...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integration Workshop Session II: State and Industry Perspectives Transportation and Stationary Power Integration Workshop Session II: State and Industry Perspectives Opportunities...

  10. Transportation and Stationary Power Integration Workshop Attendees...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attendees List Transportation and Stationary Power Integration Workshop Attendees List List of attendees for the Transportation and Stationary Power Integration Workshop...

  11. Biomass Indirect Liquefaction Strategy Workshop: Summary Report...

    Broader source: Energy.gov (indexed) [DOE]

    Strategy Workshop: Summary Report Biomass Indirect Liquefaction Strategy Workshop: Summary Report This report is based on the proceedings of the U.S. DOE's Bioenergy Technologies...

  12. 2013 Biological Hydrogen Production Workshop Summary Report ...

    Broader source: Energy.gov (indexed) [DOE]

    2013 Biological Hydrogen Production Workshop Summary Report 2013 Biological Hydrogen Production Workshop Summary Report November 2013 summary report for the 2013 Biological...

  13. Lightweighting and Propulsion Materials Roadmapping Workshop...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lightweighting and Propulsion Materials Roadmapping Workshop Outbrief Lightweighting and Propulsion Materials Roadmapping Workshop Outbrief 2012 DOE Hydrogen and Fuel Cells Program...

  14. Natural Gas and Hydrogen Infrastructure Opportunities Workshop...

    Broader source: Energy.gov (indexed) [DOE]

    Natural Gas and Hydrogen Infrastructure Opportunities Workshop Agenda Natural Gas and Hydrogen Infrastructure Opportunities Workshop Agenda Agenda for the Natural Gas and Hydrogen...

  15. Hydrogen Infrastructure Market Readiness Workshop: Preliminary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    presentation was disseminated to workshop attendees to convey the aggregate and "raw" feedback collected during the workshop. wkshpmarketreadinesspreliminaryresults.pdf More...

  16. Spectrum Technology Workshop | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Technology Workshop Spectrum Technology Workshop Agenda.pdf More Documents & Publications Radio and Spectrum Management Transuranic Waste Transportation Working Group Agenda...

  17. DOE Hydrogen Transition Analysis Workshop Discussion Comments...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workshop Discussion Comments, Questions, and Action Items DOE Hydrogen Transition Analysis Workshop Discussion Comments, Questions, and Action Items Discussion comments, questions,...

  18. Fourth Intelligent Sootblowing Workshop Proceedings

    SciTech Connect (OSTI)

    None

    2002-03-01T23:59:59.000Z

    This document describes the presentations and panel discussions of the Fourth Intelligent Sootblowing Workshop and Exposition held March 19-21, 2002, in Houston, Texas.

  19. 2007 gasification technologies workshop papers

    SciTech Connect (OSTI)

    NONE

    2007-03-15T23:59:59.000Z

    Topics covered in this workshop are fundamentals of gasification, carbon capture, reviews of financial and regulatory incentives, coal to liquids, and focus on gasification in the Western US.

  20. Imaging Sciences Workshop Proceedings

    SciTech Connect (OSTI)

    Candy, J.V.

    1996-11-21T23:59:59.000Z

    This report contains the proceedings of the Imaging Sciences Workshop sponsored by C.A.S.LS., the Center for Advanced Signal & Image Sciences. The Center, established primarily to provide a forum where researchers can freely exchange ideas on the signal and image sciences in a comfortable intellectual environment, has grown over the last two years with the opening of a Reference Library (located in Building 272). The Technical Program for the 1996 Workshop include a variety of efforts in the Imaging Sciences including applications in the Microwave Imaging, highlighted by the Micro-Impulse Radar (MIR) system invented at LLNL, as well as other applications in this area. Special sessions organized by various individuals in Speech, Acoustic Ocean Imaging, Radar Ocean Imaging, Ultrasonic Imaging, and Optical Imaging discuss various applica- tions of real world problems. For the more theoretical, sessions on Imaging Algorithms and Computed Tomography were organized as well as for the more pragmatic featuring a session on Imaging Systems.

  1. (Acid rain workshop)

    SciTech Connect (OSTI)

    Turner, R.S.

    1990-12-05T23:59:59.000Z

    The traveler presented a paper entitled Susceptibility of Asian Ecosystems to Soil-Mediated Acid Rain Damage'' at the Second Workshop on Acid Rain in Asia. The workshop was organized by the Asian Institute of Technology (Bangkok, Thailand), Argonne National Laboratory (Argonne, Illinois), and Resource Management Associates (Madison, Wisconsin) and was sponsored by the US Department of Energy, the United Nations Environment Program, the United Nations Economic and Social Commission for Asia and the Pacific, and the World Bank. Papers presented on the first day discussed how the experience gained with acid rain in North America and Europe might be applied to the Asian situation. Papers describing energy use projections, sulfur emissions, and effects of acid rain in several Asian countries were presented on the second day. The remaining time was allotted to discussion, planning, and writing plans for a future research program.

  2. Unmanned Aerospace Vehicle Workshop

    SciTech Connect (OSTI)

    Vitko, J. Jr. [Sandia National Labs., Livermore, CA (United States)

    1995-04-01T23:59:59.000Z

    The Unmanned Aerospace Vehicle (UAV) Workshop concentrated on reviewing and refining the science experiments planned for the UAV Demonstration Flights (UDF) scheduled at the Oklahoma Cloud and Radiation Testbed (CART) in April 1994. These experiments were focused around the following sets of parameters: Clear sky, daylight; Clear-sky, night-to-day transition; Clear sky - improve/validate the accuracy of radiative fluxes derived from satellite-based measurements; Daylight, clouds of opportunity; and, Daylight, broken clouds.

  3. DOE Transmission Workshop

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Deliciouscritical_materials_workshop_presentations.pdf MoreProgramofContract at itsSelections for ReducingTransmission

  4. Accelerator Concepts Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout the Building Technologies Office Workshop Working Groups AAC 2004

  5. Accelerator Concepts Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout the Building Technologies Office Workshop Working Groups AAC

  6. Report on a workshop concerning code validation

    SciTech Connect (OSTI)

    none,

    1996-12-01T23:59:59.000Z

    The design of wind turbine components is becoming more critical as turbines become lighter and more dynamically active. Computer codes that will reliably predict turbine dynamic response are, therefore, more necessary than before. However, predicting the dynamic response of very slender rotating structures that operate in turbulent winds is not a simple matter. Even so, codes for this purpose have been developed and tested in North America and in Europe, and it is important to disseminate information on this subject. The purpose of this workshop was to allow those involved in the wind energy industry in the US to assess the progress invalidation of the codes most commonly used for structural/aero-elastic wind turbine simulation. The theme of the workshop was, ``How do we know it`s right``? This was the question that participants were encouraged to ask themselves throughout the meeting in order to avoid the temptation of presenting information in a less-than-critical atmosphere. Other questions posed at the meeting are: What is the proof that the codes used can truthfully represent the field data? At what steps were the codes tested against known solutions, or against reliable field data? How should the designer or user validate results? What computer resources are needed? How do codes being used in Europe compare with those used in the US? How does the code used affect industry certification? What can be expected in the future?

  7. Climate WorkshopsClimate Workshops for Department Chairsp

    E-Print Network [OSTI]

    Tilbury, Dawn

    Climate WorkshopsClimate Workshops for Department Chairsp University of Wisconsin ADVANCE-IT Slides) #12;Why focus on departmental climate? Individuals experience climate in their immediate workplace negative climate than male faculty Improving department climate is critical for retention and advancement

  8. Proceedings of the ninth IEA workshop on radiation effects in ceramic insulators

    SciTech Connect (OSTI)

    Zinkle, S.J.; Burn, G.L. [comps.; Hodgson, E.R.; Shikama, T.

    1997-12-31T23:59:59.000Z

    Several IEA workshops have been held over the past few years to discuss the growing number of experimental studies on the intriguing phenomenon of radiation induced electrical degradation (RIED). In the past year, several new RIED irradiation experiments have been performed which have a significant impact on the understanding of the RIED phenomenon. These experiments include a HFIR neutron irradiation experiment on 12 different grades of single- and poly-crystal alumina (450 C, {approximately}3 dpa, 200 V/mm) and several additional neutron, electron and light ion irradiation experiments. The primary objective of the IEA workshop was to review the available RIED studies on ceramic insulators. Some discussion of recent work in other areas such as loss tangent measurements, mechanical strength, etc. occurred on the final afternoon of the workshop. The IEA workshop was held in conjunction with a US-Japan JUPITER program experimenter`s workshop on dynamic radiation effects in ceramic insulators.

  9. Optical Network Testbeds Workshop

    SciTech Connect (OSTI)

    Joe Mambretti

    2007-06-01T23:59:59.000Z

    This is the summary report of the third annual Optical Networking Testbed Workshop (ONT3), which brought together leading members of the international advanced research community to address major challenges in creating next generation communication services and technologies. Networking research and development (R&D) communities throughout the world continue to discover new methods and technologies that are enabling breakthroughs in advanced communications. These discoveries are keystones for building the foundation of the future economy, which requires the sophisticated management of extremely large qualities of digital information through high performance communications. This innovation is made possible by basic research and experiments within laboratories and on specialized testbeds. Initial network research and development initiatives are driven by diverse motives, including attempts to solve existing complex problems, the desire to create powerful new technologies that do not exist using traditional methods, and the need to create tools to address specific challenges, including those mandated by large scale science or government agency mission agendas. Many new discoveries related to communications technologies transition to wide-spread deployment through standards organizations and commercialization. These transition paths allow for new communications capabilities that drive many sectors of the digital economy. In the last few years, networking R&D has increasingly focused on advancing multiple new capabilities enabled by next generation optical networking. Both US Federal networking R&D and other national R&D initiatives, such as those organized by the National Institute of Information and Communications Technology (NICT) of Japan are creating optical networking technologies that allow for new, powerful communication services. Among the most promising services are those based on new types of multi-service or hybrid networks, which use new optical networking technologies. Several years ago, when many of these optical networking research topics were first being investigated, they were the subject of controversial debate. The new techniques challenged many long-held concepts related to architecture and technology. However, today all major networking organizations are transitioning toward infrastructure that incorporates these new concepts. This progress has been assisted through the series of Optical Networking Testbed Workshops (ONT). The first (ONT1) outlined a general framework of key issues and topics and developed a series of recommendations (www.nren.nasa.gov/workshop7). The second (ONT2) developed a common vision of optical network technologies, services, infrastructure, and organizations (www.nren.nasa.gov/workshop8). Processes that allow for a common vision encourage widespread deployment of these types of resources among advanced networking communities. Also, such a shared vision enables key concepts and technologies to migrate from basic research testbeds to wider networking communities. The ONT-3 workshop built on these earlier activities by expanding discussion to include additional considerations of the international interoperability and of greater impact of optical networking technology on networking in general. In accordance with this recognition, the workshop confirmed that future-oriented research and development is indispensable to fundamentally change the current Internet architecture to create a global network incorporating completely new concepts. The workshop also recognized that the first priority to allow for this progress is basic research and development, including international collaborative activities, which are important for the global realization of interoperability of a new generation architecture.

  10. SIVE Workshop '95 Building Map

    E-Print Network [OSTI]

    Cremer, James

    SIVE Workshop '95 Building Map Workshop . Room W401 in Pappajohn Business Administration Building RIVERSIDE DRIVE (HIGHWAYS 1 & 6) Highways 1 & 6 (from Coralville) Riverside Drive RIVER IOWA ART BUILDING 1234567890 1234567890 1234567890 1234567890 Pappajohn Business Administration Building IMU RAMP DUBUQUE ST

  11. Summary Report on Stakeholder Workshop

    E-Print Network [OSTI]

    : Devon Manz Electric Power and Propulsion Systems Lab One Research Circle, Niskayuna, NY, 12309 PhoneSummary Report on Stakeholder Workshop Prepared for U.S. Department of Energy Office of Electricity on Stakeholder Workshop By GE Global Research Niskayuna, New York And University of Hawaii Hawaii Natural Energy

  12. EMSL Pore Scale Modeling Challenge/Workshop

    SciTech Connect (OSTI)

    Hess, Nancy J.; Oostrom, Martinus; Celia, Michael A.; Hilpert, Markus; Kang, Qinjun; Pyrak-Nolte, Laura J.; Scheibe, Timothy D.; Tartakovsky, Alexandre M.; Werth, Charles J.; Wildenschild, Dorthe; Zhang, Changyong; Bialkowski, Stephen E.; Ghezzehei, Teamrat A.; Tang, Guoping; Doster, Florian; Kumar, Jitendra; Parashar, Rishi; Gerlach, Robin; Yoon, Hongkyu; Redden, George D.; Zhang, Tianyu; Huang, Hai; Nogues, Juan; Deng, Wen; Resat, Haluk; Rod, Kenton A.; Baer, Donald R.; Kelly, Ryan T.; Um, Wooyong; Wang, Guohui; Richmond, Marshall C.; Rector, David R.; Stewart, Mark L.; Jung, Hun Bok; Plata, Charity

    2011-08-09T23:59:59.000Z

    Report covers the background for the workshop, objectives, important research directions, necessary capabilities and overall recommendations.

  13. SciTech Connect: Environmental Virology Workshop - Tucson, Arizona...

    Office of Scientific and Technical Information (OSTI)

    in this workshop, including 44 attendees, 3 program officers from private and federal funding agencies, and 19 workshop teachers. The workshop was incredibly productive and...

  14. Workshop Notes from ""Compressed Natural Gas and Hydrogen Fuels...

    Broader source: Energy.gov (indexed) [DOE]

    Workshop Notes from ""Compressed Natural Gas and Hydrogen Fuels: Lessons Learned for the Safe Deployment of Vehicles"" Workshop, December 10-11, 2009 Workshop Notes from...

  15. Algal Biofuels Strategy Spring Workshop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Algal Biofuels Strategy Spring Workshop Algal Biofuels Strategy Spring Workshop Algal Biofuels Strategy Spring Workshop Agenda algaeworkshopagenda.pdf More Documents &...

  16. Biogas and Fuel Cells Workshop Summary Report: Proceedings from...

    Broader source: Energy.gov (indexed) [DOE]

    and Fuel Cells Workshop Summary Report: Proceedings from the Biogas and Fuel Cells Workshop, Golden, Colorado, June 11-13, 2012 Biogas and Fuel Cells Workshop Summary Report:...

  17. Waste-to-Energy Roadmapping Workshop Agenda | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Waste-to-Energy Roadmapping Workshop Agenda Waste-to-Energy Roadmapping Workshop Agenda Waste-to-Energy Roadmapping Workshop Agenda, November 5-6, 2014, Arlington, Virginia....

  18. ARM - Teacher Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC :ProductsSCM Forcing DataScienceSteeringTeachersTeacher Workshops Outreach

  19. Sandia National Laboratories: Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1development Sandia, NREL Release Wave EnergyLinks WaterWindSandiaWorkshops Protected:

  20. Meetings and Workshops- 2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping the NanoscaleMechanicalMedicineEventsmeetings workshops Meetings

  1. Archeology Workshop Draft Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout theOFFICEAmesApplication2 (CRAC 2SSRL27 Users' Meeting | Workshops |

  2. Sandia National Laboratories: Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmitted for USMaterialsthe Goal of H2FIRSTSuppliers:Workshops Sandia, the

  3. International workshop on plasma-based neutron sources

    SciTech Connect (OSTI)

    NONE

    1996-12-09T23:59:59.000Z

    The workshop was devoted to discussion of the status and future directions of work on plasma-based neutron sources. The workshop presentations demonstrated significant progress in development of the concepts of these sources and in broadening the required data base. Two main groups of neutron source designs were presented at the workshop: tokamak-based and mirror-based. Designs of the tokamak- based devices use the extensive data base generated during decades of tokamak research. Their plasma physics performance can be predicted with a high degree of confidence. On the other hand, they are relatively large and expensive, and best suited for Volumetric Neutron Sources (VNSes) or other large scale test facilities. They also have the advantage of being on the direct path to a power- producing reactor as presently conceived, although alternatives to the tokamak are presently receiving serious consideration for a reactor. The data base for the mirror-based group of plasma sources is less developed, but they are generally more flexible and, with appropriate selection of parameters, have the potential to be developed as compact Accelerated Test Facilities (ATFs) as well as full-scale VNSes. Also discussed at the workshop were some newly proposed but potentially promising concepts, like those based on the flow-through pinch and electrostatic ion-beam sources.

  4. Future prospects for radioactive nuclear beams in North America

    SciTech Connect (OSTI)

    Nitschke, J.M.

    1993-05-01T23:59:59.000Z

    In 1989 this author proposed the construction of a dedicated, flexible, radioactive nuclear beams facility that would provide intense beams of nearly all elements for a program of scientific studies in nuclear structure, nuclear reaction dynamics, astrophysics, high-spin physics, nuclei far from stability, material- and surface science, and atomic- and hyperfine-interaction physics. The initial name proposed for the new facility was ``IsoSpin Factory`` to underscore the key feature of this new physics tool; it was later changed to ``IsoSpin Laboratory`` (ISL). The ISL is now supported by a broad base of nuclear scientists and has been identified in the US Long Range Plan on Nuclear Science as one of the new potential construction projects for the second part of this decade. Since 1989 a number of conferences and workshops has been held in which the scientific and technical case for RNB facilities has been made. The purpose of this paper is to focus on the North American plan for the ISL, which was initially summarized in a ``White Paper`` but has since evolved in its scientific and technical scop.

  5. Proceedings of the third ICFA mini-workshop on high intensity, high brightness hadron accelerators

    SciTech Connect (OSTI)

    Roser, T.

    1997-11-01T23:59:59.000Z

    The third mini-workshop on high intensity, high brightness hadron accelerators was held at Brookhaven National Laboratory on May 7-9, 1997 and had about 30 participants. The workshop focussed on rf and longitudinal dynamics issues relevant to intense and/or bright hadron synchrotrons. A plenary session was followed by four sessions on particular topics. This document contains copies of the viewgraphs used as well as summaries written by the session chairs.

  6. Proceedings of the fifth PTCOG meeting and international workshop on biomedical accelerators

    SciTech Connect (OSTI)

    Not Available

    1987-04-01T23:59:59.000Z

    This volume contains the proceeding and individual papers presented at the Fifth PTCOG meeting and International Workshop on Biomedical Accelerators. The meeting was divided into sessions on the biomedical aspects of therapy delivery, new biomedical accelerators, facilities, and beam localization and status report. Individual papers have been abstracted and indexed for the Energy Data Base.

  7. Biological Interactions and Dynamics Workshop | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6 M. Babzien,Biological Imaging by Soft X-Ray1.2

  8. 2014 PV Performance Modeling Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2014 PV Performance Modeling Workshop Photo courtesy of Sempra Energy 8:00 AM to 9:00 PM Monday, May 5, 2014 At Biltmore Hotel, Santa Clara, California 512014 Agenda: Start Time...

  9. Microwave and Radio Frequency Workshop

    Broader source: Energy.gov [DOE]

    At the Microwave and Radio Frequency Workshop (held in Long Beach, CA, on July 25, 2012), academic and industry experts discussed the existing and emerging electrotechnologies – such as microwave ...

  10. SciChar Workshop | JCESR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    adipex for sale Charge to the SciChar Workshop Define the grand science challenges for battery science for the Li-ion and Beyond Li-ion research communities. Identify...

  11. Proceedings: Commercial Refrigeration Research Workshop

    SciTech Connect (OSTI)

    None

    1984-10-01T23:59:59.000Z

    Improving refrigeration systems for commercial use can enhance both utility load factors and supermarket profits. This workshop has pinpointed research needs in commercial refrigeration and systems integration for a supermarket environment.

  12. EV Everywhere Workshop: Power Electronics and Thermal Management...

    Energy Savers [EERE]

    More Documents & Publications EV Everywhere Batteries Workshop - Beyond Lithium Ion Breakout Session Report EV Everywhere Batteries Workshop - Pack Design and...

  13. EV Everywhere Batteries Workshop - Materials Processing and Manufactur...

    Energy Savers [EERE]

    More Documents & Publications EV Everywhere Batteries Workshop - Next Generation Lithium Ion Batteries Breakout Session Report EV Everywhere Batteries Workshop - Beyond...

  14. Photovoltaics performance and reliability workshop

    SciTech Connect (OSTI)

    Mrig, L. [ed.] [ed.

    1992-11-01T23:59:59.000Z

    This document consists of papers and viewgraphs compiled from the proceedings of a workshop held in September 1992. This workshop was the fifth in a series sponsored by NREL/DOE under the general subject areas of photovoltaic module testing and reliability. PV manufacturers, DOE laboratories, electric utilities and others exchanged technical knowledge and field experience. The topics of cell and module characterization, module and system performance, materials and module durability/reliability research, solar radiation, and applications are discussed.

  15. Midwest Transmission Workshop II Summary

    SciTech Connect (OSTI)

    Kevin Bryan

    2002-12-05T23:59:59.000Z

    OAK-B135 After introductions of all participants, Abby Arnold, RESOLVE, reviewed the purpose of the meeting and the agenda. The purpose of the workshop was to share the results of the Midwest Independent System Operator (MISO) scenario development for wind and other fuel sources and the corresponding implications for transmission throughout the MISO control area. The workshop agenda is included in Attachment A.

  16. Photovoltaics performance and reliability workshop

    SciTech Connect (OSTI)

    Mrig, L. (ed.) [ed.

    1992-01-01T23:59:59.000Z

    This document consists of papers and viewgraphs compiled from the proceedings of a workshop held in September 1992. This workshop was the fifth in a series sponsored by NREL/DOE under the general subject areas of photovoltaic module testing and reliability. PV manufacturers, DOE laboratories, electric utilities and others exchanged technical knowledge and field experience. The topics of cell and module characterization, module and system performance, materials and module durability/reliability research, solar radiation, and applications are discussed.

  17. 6th International Microbeam Workshop

    SciTech Connect (OSTI)

    Dr Kevin M. Prise

    2004-01-01T23:59:59.000Z

    The extended abstracts which are submitted here present a summary of the proceedings of the 6th International Workshop/12th LH Gray Workshop: Microbeam Probes of Cellular Radiation Response, held at St. Catherine's College, University of Oxford, UK on March, 29th-31st, 2003. In 1993 the 4th LH Gray Workshop entitled ''Microbeam Probes of Cellular Radiation Response'' was held at the Gray Cancer Institute in Northwood. This was organized by Prof BD Michael, Dr M. Folkard and Dr KM Prise and brought together 40 participants interested in developing and applying new microbeam technology to problems in radiation biology (1). The workshop was an undoubted success and has spawned a series of subsequent workshops every two years. In the past, these workshops have been highly successful in bringing together groups interested in developing and applying micro-irradiation techniques to the study of cell and tissue damage by ionizing radiations. Following the first microbeam workshop, there has been a rapid growth in the number of centres developing radiobiology microbeams, or planning to do so and there are currently 15-20 worldwide. Much of the recent research using microbeams has used them to study low-dose effects and ''non-targeted'' responses such bystander effects, genomic instability and adaptive responses. The goal of the 6th workshop was to build on our knowledge of the development of microbeam approaches and the application to radiation biology in the future with the meeting stretching over a 3 day period. Over 80 participants reviewed the current state of radiobiology microbeam research worldwide and reported on new technological developments both in the fields of physics and biology.

  18. Summary of working group g: beam material interaction

    SciTech Connect (OSTI)

    Kiselev, D.; /PSI, Villigen; Mokhov, N.V.; /Fermilab; Schmidt, R.; /CERN

    2010-11-01T23:59:59.000Z

    For the first time, the workshop on High-Intensity and High-Brightness Hadron Beams (HB2010), held at Morschach, Switzerland and organized by the Paul Scherrer Institute, included a Working group dealing with the interaction between beam and material. Due to the high power beams of existing and future facilities, this topic is already of great relevance for such machines and is expected to become even more important in the future. While more specialized workshops related to topics of radiation damage, activation or thermo-mechanical calculations, already exist, HB2010 provided the occasion to discuss the interplay of these topics, focusing on components like targets, beam dumps and collimators, whose reliability are crucial for a user facility. In addition, a broader community of people working on a variety of issues related to the operation of accelerators could be informed and their interest sparked.

  19. Workshops on Science Enabled by a Coherent, CW, Synchrotron X-ray Source, June 2011

    SciTech Connect (OSTI)

    Brock, Joel

    2012-01-03T23:59:59.000Z

    In June of 2011 we held six two-day workshops called "XDL-2011: Science at the Hard X-ray Diffraction Limit". The six workshops covered (1) Diffraction-based imaging techniques, (2) Biomolecular structure from non-crystalline materials, (3) Ultra-fast science, (4) High-pressure science, (5) Materials research with nano-beams and (6) X-ray photon correlation spectroscopy (XPCS), In each workshop, invited speaker from around the world presented examples of novel experiments that require a CW, diffraction-limited source. During the workshop, each invited speaker provided a one-page description of the experiment and an illustrative graphic. The experiments identified by the workshops demonstrate the broad and deep scientific case for a CW coherent synchrotron x-ray source. The next step is to perform detailed simulations of the best of these ideas to test them quantitatively and to guide detailed x-ray beam-line designs. These designs are the first step toward developing detailed facility designs and cost estimates.

  20. BEAM DYNAMICS STUDIES IN SPIRAL 2 LINAC R. Duperrier, D. Uriot, CEA Saclay, 91191 Gif sur Yvette; N. Pichoff , CEA Bruyres le Chtel, BP

    E-Print Network [OSTI]

    Boyer, Edmond

    to the LINAG driver. End-to-end simulations (low-energy beam lines, RFQ, medium-energy beam line, SC linac is proposed for the production of the radioactive ions, with the aim of at least 1013 fissions per second) and a superconducting linac with independent resonators (QWRs and/or HWRs). The accelerating optimisation has

  1. Grid Transformation Workshop Results Grid Transformation Workshop Results 2 April 2012

    E-Print Network [OSTI]

    Grid Transformation Workshop Results April 2012 #12;Grid Transformation Workshop Results 2 April 2012 Grid Transformation Workshop Results plications. We will explore the basics of data modeling Transformation Workshop: Advanced Reading Material Product ID 1024659. The material in this report builds upon

  2. The General Postgraduate Program: Workshop Academic Writing

    E-Print Network [OSTI]

    Hanke-Bourgeois, Martin

    The General Postgraduate Program: Workshop Academic Writing Amanda Habbershaw, Translator and English Trainer Course Description Nowadays success in science involves publishing articles the formal English required for scientific and academic texts. The objective of this workshop is to improve

  3. Open Space Stewardship Workshop for Secondary Teachers

    Broader source: Energy.gov [DOE]

    This practical, hands-on workshop provides an opportunity to experience the equipment and field techniques that are useful in Open Space Stewardship Program. The four day workshop (July 15-19 2013)...

  4. Advanced Supply System Validation Workshop Agenda

    Broader source: Energy.gov [DOE]

    List of Assumptions and Draft Workshop Agenda for the Advanced Supply System Validation Workshop, February 3-4, 2014, Golden, Colorado, from the U.S. Department of Energy's Bioenergy Technologies Office.

  5. Proceedings of the Advanced Hadron Facility accelerator design workshop, February 20--25, 1989

    SciTech Connect (OSTI)

    Thiessen, H.A. (comp.)

    1990-04-01T23:59:59.000Z

    The International Workshop on Hadron Facility Technology was held February 20--25, 1989, at the Study Center at Los Alamos National Laboratory. This volume (second of two) included papers on computer controls, polarized beam, rf, magnet and power supplies, experimental areas, and instabilities. Participants included groups from AHF, Brookhaven National Laboratory, European Hadron Facility, Fermilab, and the Moscow Meson Factory. The workshop was well attended by members of the Los Alamos staff. The interchange of information and the opportunity by criticism by peers was important to all who attended.

  6. Strategic Directions for Hydrogen Delivery Workshop Proceedings

    Broader source: Energy.gov [DOE]

    Proceedings from the Strategic Directions for Hydrogen Delivery Workshop held May 7-8, 2003 in Washington, DC. Author: Energetics

  7. Critical Materials Workshop Final Participant List

    Broader source: Energy.gov [DOE]

    List of participants who attended the Critical Materials Workshop held on April 3, 2012 in Arlington, VA

  8. Network Requirements Workshop - Documents and Background Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Requirements Reviews Network Requirements Reviews Documents and Background Materials Science Engagement Move your data Programs & Workshops Science...

  9. Stanford Geothermal Workshop - Geothermal Technologies Office...

    Energy Savers [EERE]

    - Geothermal Technologies Office Stanford Geothermal Workshop - Geothermal Technologies Office Presentation by Geothermal Technologies Director Doug Hollett at the Stanford...

  10. DOE Vehicular Tank Workshop Sandia National Laboratories

    E-Print Network [OSTI]

    DOE Vehicular Tank Workshop Sandia National Laboratories Livermore, CA April 29, 2010 Thursday the deployment of hydrogen storage tanks in early market fuel cell applications for vehicles Workshop Objectives at the first workshop in more detail, including Type 4 tank and PRD testing, tank service life and tracking

  11. Photovoltaic module reliability workshop

    SciTech Connect (OSTI)

    Mrig, L. (ed.)

    1990-01-01T23:59:59.000Z

    The paper and presentations compiled in this volume form the Proceedings of the fourth in a series of Workshops sponsored by Solar Energy Research Institute (SERI/DOE) under the general theme of photovoltaic module reliability during the period 1986--1990. The reliability Photo Voltaic (PV) modules/systems is exceedingly important along with the initial cost and efficiency of modules if the PV technology has to make a major impact in the power generation market, and for it to compete with the conventional electricity producing technologies. The reliability of photovoltaic modules has progressed significantly in the last few years as evidenced by warranties available on commercial modules of as long as 12 years. However, there is still need for substantial research and testing required to improve module field reliability to levels of 30 years or more. Several small groups of researchers are involved in this research, development, and monitoring activity around the world. In the US, PV manufacturers, DOE laboratories, electric utilities and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in this field were brought together under SERI/DOE sponsorship to exchange the technical knowledge and field experience as related to current information in this important field. The papers presented here reflect this effort.

  12. Photovoltaic performance and reliability workshop

    SciTech Connect (OSTI)

    Mrig, L. [ed.

    1993-12-01T23:59:59.000Z

    This workshop was the sixth in a series of workshops sponsored by NREL/DOE under the general subject of photovoltaic testing and reliability during the period 1986--1993. PV performance and PV reliability are at least as important as PV cost, if not more. In the US, PV manufacturers, DOE laboratories, electric utilities, and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in the field were brought together to exchange the technical knowledge and field experience as related to current information in this evolving field of PV reliability. The papers presented here reflect this effort since the last workshop held in September, 1992. The topics covered include: cell and module characterization, module and system testing, durability and reliability, system field experience, and standards and codes.

  13. Cleanroom Energy Efficiency Workshop Proceedings

    SciTech Connect (OSTI)

    Tschudi, Bill

    1999-03-15T23:59:59.000Z

    On March 15, 1999, Lawrence Berkeley National Laboratory hosted a workshop focused on energy efficiency in Cleanroom facilities. The workshop was held as part of a multiyear effort sponsored by the California Institute for Energy Efficiency, and the California Energy Commission. It is part of a project that concentrates on improving energy efficiency in Laboratory type facilities including cleanrooms. The project targets the broad market of laboratory and cleanroom facilities, and thus cross-cuts many different industries and institutions. This workshop was intended to raise awareness by sharing case study success stories, providing a forum for industry networking on energy issues, contributing LBNL expertise in research to date, determining barriers to implementation and possible solutions, and soliciting input for further research.

  14. Midwest Transmission Workshop III Summary

    SciTech Connect (OSTI)

    Kevin Bryan

    2003-03-12T23:59:59.000Z

    OAK-B135 On March 12-13, 2002, the National Wind Coordinating Committee (NWCC), in cooperation with regional stakeholders, held a two-day workshop: Planning for Electrical Transmission Needs in the Upper Midwest. The workshop was the outgrowth of an effort to develop a forum and process for consideration of transmission options that strives for equitable allocation of benefits and impacts among all affected parties. The goal of this workshop was to provide a catalyst for an enhanced, inclusive process for transmission planning with participation of and acceptance by all affected stakeholders. Participants in the meeting included representatives of state and regional regulatory agencies, utilities and power generators, the wind industry, environmental and landowner interests, and other interested parties (see Attachment A for a list of meeting participants).

  15. Applications of synchrotron radiation to Chemical Engineering Science: Workshop report

    SciTech Connect (OSTI)

    Not Available

    1991-07-01T23:59:59.000Z

    This report contains extended abstracts that summarize presentations made at the Workshop on Applications of Synchrotron Radiation to Chemical Engineering Science held at Argonne National Laboratory (ANL), Argonne, IL, on April 22--23, 1991. The talks emphasized the application of techniques involving absorption fluorescence, diffraction, and reflection of synchrotron x-rays, with a focus on problems in applied chemistry and chemical engineering, as well as on the use of x-rays in topographic, tomographic, and lithographic procedures. The attendees at the workshop included experts in the field of synchrotron science, scientists and engineers from ANL, other national laboratories, industry, and universities; and graduate and undergraduate students who were enrolled in ANL educational programs at the time of the workshop. Talks in the Plenary and Overview Session described the status of and special capabilities to be offered by the Advanced Photon Source (APS), as well as strategies and opportunities for utilization of synchrotron radiation to solve science and engineering problems. Invited talks given in subsequent sessions covered the use of intense infrared, ultraviolet, and x-ray photon beams (as provided by synchrotrons) in traditional and nontraditional areas of chemical engineering research related to electrochemical and corrosion science, catalyst development and characterization, lithography and imaging techniques, and microanalysis.

  16. Proceedings of the workshop on polarized targets in storage rings

    SciTech Connect (OSTI)

    Holt, R.J. (ed.)

    1984-08-01T23:59:59.000Z

    Polarization phenomena have played an increasingly important part in the study of nuclei and nucleons in recent years. Polarization studies have been hampered by the relatively few and rather fragile polarized targets which are presently available. The concept of polarized gas targets in storage rings opens a much wider range of possibilities than is available in the external target geometry. This novel method will represent a considerable advance in nuclear physics and will continue to receive much attention in plans for future facilities. An internal, polarized-target station is being planned for the cooler ring at the Indiana University Cyclotron Facility. Internal targets are compatible with recent designs of electron accelerators proposed by the Massachusetts Institute of Technology and the Southeastern Universities Research Association. The key to nuclear-science programs based on internal targets pivots on recent developments in polarized atomic beam methods, which include the more recent laser-driven polarized targets. The workshop drew together a unique group of physicists in the fields of high-energy, nuclear and atomic physics. The meeting was organized in a manner that stimulated discussion among the 58 participants and focused on developments in polarized target technology and the underlying atomic physics. An impressive array of future possibilities for polarized targets as well as current developments in polarized target technology were discussed at the workshop. Abstracts of individual items from the workshop were prepared separately for the data base.

  17. 1993 Radiation Protection Workshop: Proceedings

    SciTech Connect (OSTI)

    Not Available

    1993-12-31T23:59:59.000Z

    The 1993 DOE Radiation Protection Workshop was conducted from April 13 through 15, 1993 in Las Vegas, Nevada. Over 400 Department of Energy Headquarters and Field personnel and contractors from the DOE radiological protection community attended the Workshop. Forty-nine papers were presented in eleven separate sessions: Radiological Control Manual Implementation, New Approaches to Instrumentation and Calibration, Radiological Training Programs and Initiatives, External Dosimetry, Internal Dosimetry, Radiation Exposure Reporting and Recordkeeping, Air Sampling and Monitoring Issues, Decontamination and Decommissioning of Sites, Contamination Monitoring and Control, ALARA/Radiological Engineering, and Current and Future Health Physics Research. Individual papers are indexed separately on the database.

  18. Extreme Conditions Modeling Workshop Report

    SciTech Connect (OSTI)

    Coe, R. G.; Neary, V. S.; Lawson, M. J.; Yu, Y.; Weber, J.

    2014-07-01T23:59:59.000Z

    Sandia National Laboratories (SNL) and the National Renewable Energy Laboratory (NREL) hosted the Wave Energy Converter (WEC) Extreme Conditions Modeling (ECM) Workshop in Albuquerque, NM on May 13th-14th, 2014. The objective of the workshop was to review the current state of knowledge on how to model WECs in extreme conditions (e.g. hurricanes and other large storms) and to suggest how U.S. Department of Energy (DOE) and national laboratory resources could be used to improve ECM methods for the benefit of the wave energy industry.

  19. URBAN ATMOSPHERIC OBSERVATORY (UAO) FIRST PLANNING WORKSHOP, JANUARY 27-28-2003. WORKSHOP SUMMARY.

    SciTech Connect (OSTI)

    REYNOLDS,R.M.; LEE,H.N.

    2003-03-27T23:59:59.000Z

    The Urban Atmospheric Observatory (UAO) First Planning Workshop was held on 27-28 January 2003 at the Environmental Measurements Laboratory (EML) in downtown Manhattan, New York City. The meeting was well attended by local, state, and national administrators, as well as scientists and engineers from the national laboratories and academia. The real-time intensive UAO is a necessary step toward the development and validation of new technologies in support of the New York City emergency management and anti-terrorism effort. The real-time intensive UAO will be a dense array of meteorological instrumentation, remote sensing and satellite products and model output, as well as radiation detection, gamma spectrometer and aerosol measurements focused onto a small area in the heart of Manhattan. Such a test-bed, developed in a somewhat homogeneous urban area, and with a well-developed communication and data collection backbone, will be of immense utility for understanding how models of all scales can be improved and how they can best be integrated into the city's emergency program. The goal of the First Planning Workshop was to bring together a small group of experts in the fields of urban meteorology, modeling from mesoscale to fine-mesh computational fluid dynamics, instrumentation, communications and visualization, in order to (1) establish the importance of the observational program, (2) define the most efficient and cost-effective design for the program, (3) define needed intensive observational efforts and establish a schedule, and (4) define the importance of the UAO in emergency operations. The workshop achieved its goals with the enthusiastic participation of over forty persons. There was a synthesis of ideas towards a world-class facility that would benefit both immediate emergency management activities and, over an extended time, the entire field of urban meteorology and contaminant dispersion modeling.

  20. November 1, 2005 Workshop in

    E-Print Network [OSTI]

    Lin, Xiaodong

    , Regulatory and Pricing Innovations, and Corporate Governance on High Energy Prices November 18, 2005 Implementing the Energy Act of 2005 and Industry Structure January 20, 2006 Incentive Regulation and PricingNovember 1, 2005 Advanced Workshop in Regulation & Competition 2005-2006 Role of Energy Policy

  1. Proceedings: 2000 NOx Controls Workshop

    SciTech Connect (OSTI)

    None

    2001-04-01T23:59:59.000Z

    The 2000 EPRI workshop on nitrogen oxide (NOx) controls for utility boilers provided a medium for member utilities to augment their knowledge of recent operating experience and developments on NOx control technologies. The event focused on improving methods of compliance with emission regulations mandated by the Clean Air Act Amendments (CAAA) of 1990 without jeopardizing efficiency and plant performance.

  2. European Graduate Student Workshop on

    E-Print Network [OSTI]

    Fernandez, Thomas

    2006, as part of the EvoWorkshops 2006, which again runs jointly with the 9th European Conference is given of the desired feedback. This volume contains the proceedings of EvoPhD 2006, the First European on Genetic Programming and the 6th European Conference on Evolutionary Computation in Combinato- rial

  3. Risk Management Techniques and Practice Workshop Workshop Report

    SciTech Connect (OSTI)

    Quinn, T; Zosel, M

    2008-12-02T23:59:59.000Z

    At the request of the Department of Energy (DOE) Office of Science (SC), Lawrence Livermore National Laboratory (LLNL) hosted a two-day Risk Management Techniques and Practice (RMTAP) workshop held September 18-19 at the Hotel Nikko in San Francisco. The purpose of the workshop, which was sponsored by the SC/Advanced Scientific Computing Research (ASCR) program and the National Nuclear Security Administration (NNSA)/Advanced Simulation and Computing (ASC) program, was to assess current and emerging techniques, practices, and lessons learned for effectively identifying, understanding, managing, and mitigating the risks associated with acquiring leading-edge computing systems at high-performance computing centers (HPCCs). Representatives from fifteen high-performance computing (HPC) organizations, four HPC vendor partners, and three government agencies attended the workshop. The overall workshop findings were: (1) Standard risk management techniques and tools are in the aggregate applicable to projects at HPCCs and are commonly employed by the HPC community; (2) HPC projects have characteristics that necessitate a tailoring of the standard risk management practices; (3) All HPCC acquisition projects can benefit by employing risk management, but the specific choice of risk management processes and tools is less important to the success of the project; (4) The special relationship between the HPCCs and HPC vendors must be reflected in the risk management strategy; (5) Best practices findings include developing a prioritized risk register with special attention to the top risks, establishing a practice of regular meetings and status updates with the platform partner, supporting regular and open reviews that engage the interests and expertise of a wide range of staff and stakeholders, and documenting and sharing the acquisition/build/deployment experience; and (6) Top risk categories include system scaling issues, request for proposal/contract and acceptance testing, and vendor technical or business problems. HPC, by its very nature, is an exercise in multi-level risk management. Every aspect of stewarding HPCCs into the petascale era, from identification of the program drivers to the details of procurement actions and simulation environment component deployments, represents unprecedented challenges and requires effective risk management. The fundamental purpose of this workshop was to go beyond risk management processes as such and learn how to weave effective risk management practices, techniques, and methods into all aspects of migrating HPCCs into the next generation of leadership computing systems. This workshop was a follow-on to the Petascale System Integration Workshop hosted by Lawrence Berkeley National Laboratory (LBNL)/NERSC last year. It was intended to leverage and extend the risk management experience of the participants by looking for common best practices and unique processes that have been especially successful. This workshop assessed the effectiveness of tools and techniques that are or could be helpful in HPCC risk management, with a special emphasis on how practice meets process. As the saying goes: 'In theory, there is no difference between theory and practice. In practice there is'. Finally, the workshop brought together a network of experts who shared information as technology moves into the petascale era and beyond.

  4. Beam History

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6 M. Babzien, I. Ben-Zvi, P. StudyBeam History PrintBeam History

  5. Beams 92: Proceedings. Volume 2, Ion beams, electron beams, diagnostics

    SciTech Connect (OSTI)

    Mosher, D.; Cooperstein, G. [eds.] [Naval Research Lab., Washington, DC (United States)] [eds.; Naval Research Lab., Washington, DC (United States)

    1993-12-31T23:59:59.000Z

    This report contains papers on the following topics. Ion beam papers; electron beam papers; and these papers have been indexed separately elsewhere.

  6. Sticky Cotton Workshop APWDS AND WWTEFLIES IN THE SAN JOAQUIN VALLEY OF

    E-Print Network [OSTI]

    Rosenheim, Jay A.

    Sticky Cotton Workshop APWDS AND WWTEFLIES IN THE SAN JOAQUIN VALLEY OF CALIFORNIA IN 1995 Larry The conon aphid has developed into a key pest of cotton in California. The common pattern of seasonal dynamics of cotton aphid populations has changed repealedly over the last 15 years. The cotton aphid

  7. Biogas and Fuel Cells Workshop Summary Report: Proceedings from...

    Broader source: Energy.gov (indexed) [DOE]

    Biogas and Fuel Cells Workshop Summary Report Proceedings from the Biogas and Fuel Cells Workshop Golden, Colorado June 11-13, 2012 Workshop Proceedings NRELBK-5600-56523 January...

  8. Hydrogen Storage Materials Workshop Proceedings, August 14th...

    Broader source: Energy.gov (indexed) [DOE]

    Hydrogen Storage Materials Workshop Proceedings, August 14th and 15th, 2002 Hydrogen Storage Materials Workshop Proceedings, August 14th and 15th, 2002 A workshop was held to...

  9. Ocean Acidification Workshop in Anchorage | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ocean Acidification Workshop in Anchorage Ocean Acidification Workshop in Anchorage December 2, 2014 9:00AM to 6:00PM AKST This workshop aims to bring concerned andor interested...

  10. Genetic Engineering Workshop Report, 2010

    SciTech Connect (OSTI)

    Allen, J; Slezak, T

    2010-11-03T23:59:59.000Z

    The Lawrence Livermore National Laboratory (LLNL) Bioinformatics group has recently taken on a role in DTRA's Transformation Medical Technologies (TMT) program. The high-level goal of TMT is to accelerate the development of broad-spectrum countermeasures. To achieve this goal, there is a need to assess the genetic engineering (GE) approaches, potential application as well as detection and mitigation strategies. LLNL was tasked to coordinate a workshop to determine the scope of investments that DTRA should make to stay current with the rapid advances in genetic engineering technologies, so that accidental or malicious uses of GE technologies could be adequately detected and characterized. Attachment A is an earlier report produced by LLNL for TMT that provides some relevant background on Genetic Engineering detection. A workshop was held on September 23-24, 2010 in Springfield, Virginia. It was attended by a total of 55 people (see Attachment B). Twenty four (44%) of the attendees were academic researchers involved in GE or bioinformatics technology, 6 (11%) were from DTRA or the TMT program management, 7 (13%) were current TMT performers (including Jonathan Allen and Tom Slezak of LLNL who hosted the workshop), 11 (20%) were from other Federal agencies, and 7 (13%) were from industries that are involved in genetic engineering. Several attendees could be placed in multiple categories. There were 26 attendees (47%) who were from out of the DC area and received travel assistance through Invitational Travel Orders (ITOs). We note that this workshop could not have been as successful without the ability to invite experts from outside of the Beltway region. This workshop was an unclassified discussion of the science behind current genetic engineering capabilities. US citizenship was not required for attendance. While this may have limited some discussions concerning risk, we felt that it was more important for this first workshop to focus on the scientific state of the art. We also consciously chose to not dwell on matters of policy (for example, screening of commercial gene or oligo synthesis orders), as multiple other forums for policy discussion have taken place in recent years. We acknowledge that other workshops on topics relevant to genetic engineering should be held, some of which may need to take place at higher classification levels. The workshop moderators would like to acknowledge the enthusiastic participation of the attendees in the discussions. Special thanks are given to Sofi Ibrahim, for his extensive assistance on helping this report reach its final form. The genetic engineering workshop brought together a diverse mix of genetic engineering pioneers and experts, Federal agency representatives concerned with abuses of genetic engineering, TMT performers, bioinformatics experts, and representatives from industry involved with large-scale genetic engineering and synthetic biology. Several talks established the current range of genetic engineering capabilities and the relative difficulties of identifying and characterizing the results of their use. Extensive discussions established a number of recommendations to DTRA of how to direct future research investments so that any mis-use of genetic engineering techniques can be promptly identified and characterized.

  11. 1998 federal technical standards workshop: Proceedings

    SciTech Connect (OSTI)

    NONE

    1998-10-01T23:59:59.000Z

    The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

  12. International Workshop on Linear Colliders 2010

    ScienceCinema (OSTI)

    None

    2011-10-06T23:59:59.000Z

    IWLC2010 International Workshop on Linear Colliders 2010ECFA-CLIC-ILC joint meeting: Monday 18 October - Friday 22 October 2010Venue: CERN and CICG (International Conference Centre Geneva, Switzerland) This year, the International Workshop on Linear Colliders organized by the European Committee for Future Accelerators (ECFA) will study the physics, detectors and accelerator complex of a linear collider covering both CLIC and ILC options.Contact Workshop Secretariat  IWLC2010 is hosted by CERN

  13. 2014 Sandia Wind Turbine Blade Workshop

    Broader source: Energy.gov [DOE]

    The U.S. Energy Department's Sandia National Laboratories will host its 2014 Sandia Wind Turbine Blade Workshop at the Marriott Pyramid North in Albuquerque, New Mexico. The workshop provides a unique, blade focused collaborative forum that will bring together wind energy leaders from industry, academia, and government. Stay tuned for updates. Information regarding past Wind Workshops can be found at: http://windworkshops.sandia.gov/.

  14. Hydrogen Pipeline Working Group Workshop: Code for Hydrogen Pipelines...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Working Group Workshop: Code for Hydrogen Pipelines Hydrogen Pipeline Working Group Workshop: Code for Hydrogen Pipelines Code for Hydrogen Piping and Pipelines. B31 Hydrogen...

  15. Agenda for the PV Module Reliability Workshop, February 26 -...

    Broader source: Energy.gov (indexed) [DOE]

    Agenda for the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado Agenda for the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado This...

  16. 11th International Workshop on the Interrelationship between...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Workshop on the Interrelationship between Plasma Experiments in Laboratory and Space (IPELS) 11th International Workshop on the Interrelationship between Plasma...

  17. JGI Genomics and Bioinformatics for Undergraduate Educators Workshop...

    Broader source: Energy.gov (indexed) [DOE]

    JGI Genomics and Bioinformatics for Undergraduate Educators Workshop JGI Genomics and Bioinformatics for Undergraduate Educators Workshop March 23, 2013 7:00PM EDT to March 26,...

  18. EV Everywhere Grand Challenge - Battery Workshop attendees list...

    Broader source: Energy.gov (indexed) [DOE]

    EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop EV Everywhere Grand Challenge Introduction for Electric Drive Workshop...

  19. 2015 DOE Safety and Security Enforcement Workshop - Badging and...

    Office of Environmental Management (EM)

    2015 DOE Safety and Security Enforcement Workshop - Badging and Facility Information 2015 DOE Safety and Security Enforcement Workshop - Badging and Facility Information January...

  20. Tribal Leader Energy Education Initiative Workshop - Tracey LeBeau...

    Energy Savers [EERE]

    Workshop - Tracey LeBeau's Welcome Letter Tribal Leader Energy Education Initiative Workshop - Tracey LeBeau's Welcome Letter Tracey LeBeauWelcomeLetter.pdf More Documents &...

  1. Global Climate Change Alliance Training Workshops on Mainstreaming...

    Open Energy Info (EERE)

    Alliance Training Workshops on Mainstreaming Climate Change Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Global Climate Change Alliance Training Workshop on...

  2. EV Everywhere Electric Drive Workshop: Preliminary Target-Setting...

    Broader source: Energy.gov (indexed) [DOE]

    Electric Drive Workshop: Preliminary Target-Setting Framework EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework Presentation given at the EV Everywhere...

  3. Visualization of Electric Power System Information: Workshop Proceedings

    SciTech Connect (OSTI)

    Kroposki, B.; Komomua, C.

    2013-01-01T23:59:59.000Z

    This report summarizes the workshop entitled: Visualization of Electric Power System Information. The workshop was held on September 11, 2012 on NREL's campus in Golden, Colorado.

  4. Deployment Barriers to Distributed Wind Energy: Workshop Report...

    Energy Savers [EERE]

    Deployment Barriers to Distributed Wind Energy: Workshop Report, October 28, 2010 Deployment Barriers to Distributed Wind Energy: Workshop Report, October 28, 2010 This report...

  5. Process Integration and Carbon Efficiency Workshop Summary Report...

    Energy Savers [EERE]

    Process Integration and Carbon Efficiency Workshop Summary Report Process Integration and Carbon Efficiency Workshop Summary Report This report is based on the proceedings of the...

  6. Workshop Agenda: Compressed Natural Gas and Hydrogen Fuels, Lesssons...

    Broader source: Energy.gov (indexed) [DOE]

    Workshop Agenda: Compressed Natural Gas and Hydrogen Fuels, Lesssons Learned for the Safe Deployment of Vehicles Workshop Agenda: Compressed Natural Gas and Hydrogen Fuels,...

  7. 2014 SSL Market Development Workshop Presentations and Materials...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2014 SSL Market Development Workshop Presentations and Materials 2014 SSL Market Development Workshop Presentations and Materials Download presentations from the 2014 Solid-State...

  8. Fuel Cell Technologies Program - DOD-DOE Workshop: Shipboard...

    Broader source: Energy.gov (indexed) [DOE]

    Fuel Cell Technologies Program - DOD-DOE Workshop: Shipboard APUs Overview Fuel Cell Technologies Program - DOD-DOE Workshop: Shipboard APUs Overview Presented at the DOE-DOD...

  9. RFI Deadline Extended and Pre-Solicitation Workshop Announced...

    Office of Environmental Management (EM)

    RFI Deadline Extended and Pre-Solicitation Workshop Announced on Fuel Cell Research and Development Needs RFI Deadline Extended and Pre-Solicitation Workshop Announced on Fuel Cell...

  10. Alkaline Membrane Fuel Cell Workshop Welcome and OverviewInnovation

    Broader source: Energy.gov (indexed) [DOE]

    Alkaline Membrane Fuel Cell Workshop Welcome and Overview Innovation for Our Energy Future Bryan Pivovar National Renewable Energy Laboratory AMFC Workshop May 8, 2011 Innovation...

  11. Proceedings from the Wind Manufacturing Workshop: Achieving 20...

    Office of Environmental Management (EM)

    Proceedings from the Wind Manufacturing Workshop: Achieving 20% Wind Energy in the U.S. by 2030, May 2009 Proceedings from the Wind Manufacturing Workshop: Achieving 20% Wind...

  12. Bioenergy with Carbon Capture and Sequestration WorkshopBioenergy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bioenergy with Carbon Capture and Sequestration WorkshopBioenergy with Carbon Capture and Sequestration (BECCS) Workshop Bioenergy with Carbon Capture and Sequestration...

  13. DOE New Madrid Seismic Zone Electric Utility Workshop Summary...

    Broader source: Energy.gov (indexed) [DOE]

    New Madrid Seismic Zone Electric Utility Workshop Summary Report - August 2010 DOE New Madrid Seismic Zone Electric Utility Workshop Summary Report - August 2010 The DOE New Madrid...

  14. Sustainable Alternative Fuels Cost Workshop Roster of Participants...

    Energy Savers [EERE]

    Workshop Roster of Participants Sustainable Alternative Fuels Cost Workshop Roster of Participants This is the list of attendees from the November 27, 2012, Sustainable Alternative...

  15. Workshop on Thermonuclear Reaction Rates for Astrophysics Applications

    E-Print Network [OSTI]

    Workshop on Thermonuclear Reaction Rates for Astrophysics Applications 24-25 November 2011, Athensrd and final circular for the Workshop on Thermonuclear Reaction Rates for Astrophysics Applications

  16. Small Business Teaming Workshop Program | National Nuclear Security...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA Blog Home Small Business Teaming Workshop Program Small Business Teaming Workshop Program To increase small...

  17. Algal Biofuels Strategy: Report on Workshop Results and Recent...

    Energy Savers [EERE]

    Algal Biofuels Strategy: Report on Workshop Results and Recent Work Algal Biofuels Strategy: Report on Workshop Results and Recent Work Breakout Session 3B-Integration of Supply...

  18. DOE Hydrogen Transition Analysis Workshop: Final Attendees List...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attendees List DOE Hydrogen Transition Analysis Workshop: Final Attendees List Attendee list for the DOE Hydrogen Transition Analysis Workshop on January 26, 2006....

  19. WASTE-TO-ENERGY ROADMAPPING WORKSHOP | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    WASTE-TO-ENERGY ROADMAPPING WORKSHOP WASTE-TO-ENERGY ROADMAPPING WORKSHOP The Bioenergy Technologies Office (BETO) at the Department of Energy aims to identify and address key...

  20. Transportation and Stationary Power Integration Workshop Agenda...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Agenda, October 27, 2008, Phoenix, Arizonia Transportation and Stationary Power Integration Workshop Agenda, October 27, 2008, Phoenix, Arizonia Agenda for the Transportation and...

  1. Transportation and Stationary Power Integration Workshop: ""An...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ""An Automaker's Views on the Transition to Hydrogen and Fuel Cell Vehicles Transportation and Stationary Power Integration Workshop: ""An Automaker's Views on the Transition to...

  2. DOE Program/Targets and Workshop Objectives

    Broader source: Energy.gov (indexed) [DOE]

    Nancy Garland DOE Hydrogen Program Fuel Cell Operation at Sub- Freezing Temperatures DOE ProgramTargets and Workshop Objectives Sub-Freezing Temperature Effects on Fuel Cells...

  3. CSA International Certification Discussion Hydrogen Technology Workshop

    Broader source: Energy.gov [DOE]

    Slides from the U.S. Department of Energy Hydrogen Component and System Qualification Workshop held November 4, 2010 in Livermore, CA.

  4. Davide Pettenella AGORA international scientific workshop

    E-Print Network [OSTI]

    Pettenella, Davide

    &D investments) · Legal protection (patents, marks of origin, ...) Wild and domesticated products16-04-2013 1 Davide Pettenella AGORA international scientific workshop "Marketing of forest

  5. The Business of Energy Efficiency Workshop

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy Better Buildings Neighborhood Program: The Business of Energy Efficiency Workshop, October 24-26, 2011, Burlington, VT.

  6. Transact Workshop ---August 2007 Beyond Transactions

    E-Print Network [OSTI]

    Pratt, Vaughan

    Transact Workshop --- August 2007 Beyond Transactions The Evolution of Transactional Memory mechanisms with all resources Mem TM, FS LFS, Net message queues, DBMS Coordinate transactions across

  7. 2nd Workshop on Computations in Nanotechnology

    E-Print Network [OSTI]

    Adler, Joan

    2nd Workshop on Computations in Nanotechnology Keynote Speakers: Mark J. Biggs (Adelaide), Mark: Amit Keren (Technion), Efrat Lifshitz (Technion) Tutorials: Mark J. Biggs (Molecular simulation

  8. Stanford Geothermal Workshop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Stanford Geothermal Workshop is one of the world's longest running technical meetings on geothermal energy. The conference brings together engineers, scientists and managers...

  9. "Fundamental Challenges in Solar Energy Conversion" workshop...

    Office of Science (SC) Website

    Fundamental Challenges in Solar Energy Conversion" workshop hosted by LMI-EFRC Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events...

  10. Summer 1994 Computational Science Workshop. Final report

    SciTech Connect (OSTI)

    NONE

    1994-12-31T23:59:59.000Z

    This report documents the work performed by the University of New Mexico Principal Investigators and Research Assistants while hosting the highly successful Summer 1994 Computational Sciences Workshop in Albuquerque on August 6--11, 1994. Included in this report is a final budget for the workshop, along with a summary of the participants` evaluation of the workshop. The workshop proceeding have been delivered under separate cover. In order to assist in the organization of future workshops, we have also included in this report detailed documentation of the pre- and post-workshop activities associated with this contract. Specifically, we have included a section that documents the advertising performed, along with the manner in which applications were handled. A complete list of the workshop participants in this section. Sample letters that were generated while dealing with various commercial entities and departments at the University are also included in a section dealing with workshop logistics. Finally, we have included a section in this report that deals with suggestions for future workshops.

  11. Certification and Listing Process and Procedures Workshop

    Broader source: Energy.gov [DOE]

    Slides from the U.S. Department of Energy Hydrogen Component and System Qualification Workshop held November 4, 2010 in Livermore, CA.

  12. LED Street Lighting Conversion Workshop Presentations

    Broader source: Energy.gov [DOE]

    This page provides links to the presentations given at the National League of Cities Mobile Workshop, LED Street Lighting Conversion: Saving Your Community Money, While Improving Public Safety,...

  13. Integrated Safety Management Workshop Registration, PIA, Idaho...

    Office of Environmental Management (EM)

    Safety Management Workshop Registration, PIA, Idaho National Laboratory More Documents & Publications TRAIN-PIA.pdf Occupational Medicine - Assistant PIA, Idaho National Laboratory...

  14. Reversible Fuel Cells Workshop Summary Report

    Broader source: Energy.gov (indexed) [DOE]

    Reversible Fuel Cells Workshop Summary Report Prepared for: U.S. Department of Energy Prepared by: Dr. Robert J. Remick National Renewable Energy Laboratory Mr. Douglas Wheeler DJW...

  15. The effect of inclination and stand-off on the dynamic response of beams impacted by slugs of a granular material

    E-Print Network [OSTI]

    Uth, T.; Wadley, H. N. G.; Deshpande, V. S.

    2014-12-04T23:59:59.000Z

    to impact by high-velocity tungsten carbide (WC) particle columns (slugs) has been measured with the aim of developing an understanding of the interaction of ejecta from a shallow-buried explosion with structures. The monolithic beams were made from... transfer from the ejected soil and detonation products to the target due to the spherical expansion of the ejecta; see experiments of Hlady (2004) for rigid targets and Pickering et al. (2012) for deformable plates. However, there is an additional factor...

  16. Ash deposit workshop: Class outline

    SciTech Connect (OSTI)

    Hatt, R. [Commercial Testing & Engineering Co., Lexington, KY (United States)

    1996-12-31T23:59:59.000Z

    Ash deposits formed from the combustion of coal and other fuels have plagued the steam production industry from the start. The ash fusion test has been around for over eighty years. As steam plant size increased, so have the problems associated with ash deposits. This workshop is designed to cover: (1) The basic types of deposits. (2) Causes of deposits. (3) Analytical procedures for resolving, or at least providing information about deposits and fuels, and (4) Deposit removal and reduction techniques.

  17. Occupational Medicine Workshops and Webinars

    Broader source: Energy.gov [DOE]

    The DOE Annual Occupational Medicine Workshop & Webinar (OMWW) is a valuable training opportunity established by the Office of Health, Safety, and Security in support of hundreds of medical and allied health professionals located at over four dozen locations across the Department. Their vital work in the field of Occupational Medicine encompasses medical qualification examinations, injury and illness management, disability management, workers’ compensation, and much more.

  18. DOE Transmission System Integration Workshop

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Deliciouscritical_materials_workshop_presentations.pdf MoreProgramofContract at itsSelections for Reducing

  19. Proceedings of the TOUGH workshop

    SciTech Connect (OSTI)

    Pruess, K. [ed.

    1990-09-01T23:59:59.000Z

    A workshop on applications and enhancements of the TOUGH/MULKOM family of multiphase fluid and heat flow simulation programs was held at Lawrence Berkeley Laboratory on September 13--14, 1990. The workshop was attended by 62 scientists from seven countries with interests in geothermal reservoir engineering, nuclear waste isolation, unsaturated zone hydrology, environmental problems, and laboratory and field experimentation. The meeting featured 21 technical presentations, extended abstracts of which are reproduced in the present volume in unedited form. Simulator applications included processes on a broad range of space scales, from centimeters to kilometers, with transient times from seconds to geologic time scales. A number of code enhancements were reported that increased execution speeds for large 3-D problems by factors of order 20, reduced memory requirements, and improved user-friendliness. The workshop closed with an open discussion session that focussed on future needs and means for interaction in the TOUGH user community. Input from participants was gathered by means of a questionnaire that is reproduced in the appendix. 171 refs., 91 figs., 16 tabs.

  20. Iron speciation and its biological availability in seawater: A workshop

    SciTech Connect (OSTI)

    Wells, M.L.; Bruland, K.W.

    1995-09-08T23:59:59.000Z

    This workshop brought together marine chemists with expertise in iron chemistry and biologists with expertise in the role of iron in phytoplankton production to discuss controversies regarding the role of iron in oceanic primary productivity and global climatic change. A new paradigm for marine iron biogeochemistry was generated. The five major new items within this paradigm included (1) the nature of iron inputs to the sea, (2) chemical speciation of iron in seawater, (3) relationships between iron chemistry and marine microbial community dynamics, (4) adaptations of marine microbes to iron input, and (5) ecological and biogeochemical implications of changes in iron supply to the sea.

  1. Workshop on hypersonic flow

    SciTech Connect (OSTI)

    Povinelli, L.A.

    1990-01-01T23:59:59.000Z

    An overview is given of research activity on the application of computational fluid dynamics (CDF) for hypersonic propulsion systems. After the initial consideration of the highly integrated nature of air-breathing hypersonic engines and airframe, attention is directed toward computations carried out for the components of the engine. A generic inlet configuration is considered in order to demonstrate the highly three dimensional viscous flow behavior occurring within rectangular inlets. Reacting flow computations for simple jet injection as well as for more complex combustion chambers are then discussed in order to show the capability of viscous finite rate chemical reaction computer simulations. Finally, the nozzle flow fields are demonstrated, showing the existence of complex shear layers and shock structure in the exhaust plume. The general issues associated with code validation as well as the specific issue associated with the use of CFD for design are discussed. A prognosis for the success of CFD in the design of future propulsion systems is offered.

  2. Accelerator beam profile analyzer

    DOE Patents [OSTI]

    Godel, Julius B. (Bayport, NY); Guillaume, Marcel (Grivegnee, BE); Lambrecht, Richard M. (East Quogue, NY); Withnell, Ronald (East Setauket, NY)

    1976-01-01T23:59:59.000Z

    A beam profile analyzer employing sector or quadrant plates each servo controlled to outline the edge of a beam.

  3. Ninth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Gudmundsson, J.S. (Stanford Geothermal Program)

    1983-12-15T23:59:59.000Z

    The attendance at the Workshop was similar to last year's with 123 registered participants of which 22 represented 8 foreign countries. A record number of technical papers (about 60) were submitted for presentation at the Workshop. The Program Committee, therefore, decided to have several parallel sessions to accommodate most of the papers. This format proved unpopular and will not be repeated. Many of the participants felt that the Workshop lost some of its unique qualities by having parallel sessions. The Workshop has always been held near the middle of December during examination week at Stanford. This timing was reviewed in an open discussion at the Workshop. The Program Committee subsequently decided to move the Workshop to January. The Tenth Workshop will be held on January 22-24, 1985. The theme of the Workshop this year was ''field developments worldwide''. The Program Committee addressed this theme by encouraging participants to submit field development papers, and by inviting several international authorities to give presentations at the Workshop. Field developments in at least twelve countries were reported: China, El Salvador, France, Greece, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, the Philippines, and the United States. There were 58 technical presentations at the Workshop, of which 4 were not made available for publication. Several authors submitted papers not presented at the Workshop. However, these are included in the 60 papers of these Proceedings. The introductory address was given by Ron Toms of the U.S. Department of Energy, and the banquet speaker was A1 Cooper of Chevron Resources Company. An important contribution was made to the Workshop by the chairmen of the technical sessions. Other than Stanford Geothermal Program faculty members, they included: Don White (Field Developments), Bill D'Olier (Hydrothermal Systems), Herman Dykstra (Well Testing), Karsten Pruess (Well Testing), John Counsil (Reservoir Chemistry), Malcolm Mossman (Reservoir Chemistry), Greg Raasch (Production), Manny Nathenson (Injection), Susan Petty (Injection), Subir Sanyal (Simulation), Marty Molloy (Petrothermal), and Allen Moench (Reservoir Physics). The Workshop was organized by the Stanford Geothermal Program faculty, staff and students. We would like to thank Jean Cook, Joanne Hartford, Terri Ramey, Amy Osugi, and Marilyn King for their valued help with the Workshop arrangements and the Proceedings. We also owe thanks to the program students who arranged and operated the audio-visual equipment. The Ninth Workshop was supported by the Geothermal and Hydropower Technologies Division of the U . S . Department of Energy through contract DE-AT03-80SF11459. We deeply appreciate this continued support. H. J. Ramey, Jr., R. N. Horne, P. Kruger, W. E. Brigham, F. G. Miller, J. S . Gudmundsson -vii

  4. Eighth workshop on crystalline silicon solar cell materials and processes: Extended abstracts and papers

    SciTech Connect (OSTI)

    NONE

    1998-08-01T23:59:59.000Z

    The theme of this workshop is Supporting the Transition to World Class Manufacturing. This workshop provides a forum for an informal exchange of information between researchers in the photovoltaic and non-photovoltaic fields on various aspects of impurities and defects in silicon, their dynamics during device processing, and their application in defect engineering. This interaction helps establish a knowledge base that can be used for improving device fabrication processes to enhance solar-cell performance and reduce cell costs. It also provides an excellent opportunity for researchers from industry and universities to recognize mutual needs for future joint research. The workshop format features invited review presentations, panel discussions, and two poster sessions. The poster sessions create an opportunity for both university and industrial researchers to present their latest results and provide a natural forum for extended discussions and technical exchanges.

  5. Eighth Workshop on Crystalline Silicon Solar Cell Materials and Processes; Summary Discussion Sessions

    SciTech Connect (OSTI)

    Sopori, B.; Swanson, D.; Sinton, R.; Stavola, M.; Tan, T.

    1998-12-08T23:59:59.000Z

    This report is a summary of the panel discussions included with the Eighth Workshop on Crystalline Silicon Solar Cell Materials and Processes. The theme of the workshop was ''Supporting the Transition to World Class Manufacturing.'' This workshop provided a forum for an informal exchange of information between researchers in the photovoltaic and nonphotovoltaic fields on various aspects of impurities and defects in silicon, their dynamics during device processing, and their application in defect engineering. This interaction helped establish a knowledge base that can be used for improving device-fabrication processes to enhance solar-cell performance and reduce cell costs. It also provided an excellent opportunity for researchers from industry and universities to recognize mutual needs for future joint research.

  6. Fourth International Workshop on Termination Dagstuhl, Germany

    E-Print Network [OSTI]

    Giesl, Juergen

    Fourth International Workshop on Termination WST '99 Dagstuhl, Germany May 10­12, 1999 Abstracts #12; Fourth International Workshop on Termination WST '99 Dagstuhl, Germany May 10­12, 1999 Abstracts, The Netherlands) #12; Contents Hans Zantema The Termination Hierarchy for Term Rewriting

  7. Workshop to Assess Innovative Solutions to Transportation

    E-Print Network [OSTI]

    Workshop to Assess Innovative Solutions to Transportation Needs in the Colonias Workshop Summary SWUTC/04/167151-1 Texas Transportation Institute Texas A&M University System College Station, Texas 77843-3135 Center for HUD's Colonias Program Southwest Region University Transportation Center #12

  8. HKN MATLAB Workshop October 4th, 2013

    E-Print Network [OSTI]

    California at San Diego, University of

    HKN MATLAB Workshop October 4th, 2013 #12;But first, what is HKN? HKN is ECE focused engineering Workshop #12;First, how to access MATLAB · We will use UCSD's virtual lab. ­ This should work for all JSOE now have access to a virtual ACMS desktop, from which you can run MATLAB! · Student version of MATLAB

  9. NIST Standards in Trade Workshops Increase

    E-Print Network [OSTI]

    NIST Standards in Trade Workshops Increase Trade Opportunities and Exports for U.S. Industry Since 1995, U.S. industry has looked to the NIST Standards in Trade (SIT) Workshop Program to provide opportunities for cooperation on topics related to standards, conformity assessment and trade that are important

  10. Fourteenth workshop geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

    1989-01-01T23:59:59.000Z

    The Fourteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 24--26, 1989. Major areas of discussion include: (1) well testing; (2) various field results; (3) geoscience; (4) geochemistry; (5) reinjection; (6) hot dry rock; and (7) numerical modelling. For these workshop proceedings, individual papers are processed separately for the Energy Data Base.

  11. Fourteenth workshop geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

    1989-12-31T23:59:59.000Z

    The Fourteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 24--26, 1989. Major areas of discussion include: (1) well testing; (2) various field results; (3) geoscience; (4) geochemistry; (5) reinjection; (6) hot dry rock; and (7) numerical modelling. For these workshop proceedings, individual papers are processed separately for the Energy Data Base.

  12. The National Workshop on Clean Energy Education

    E-Print Network [OSTI]

    Gilbert, Matthew

    The National Workshop on Clean Energy Education ENERGYLITERACY Recommendations and Strategies Full Report #12;THE NATIONAL WORKSHOP ON CLEAN ENERGY EDUCATION UNIVERSITY OF ILLINOIS AT URBANA-CHAMPAIGN OCTOBER 13, 2011 Full Report #12;#12;FOREWORD Clean energy education is an enabling foundation with far

  13. Installing Small Wind Turbines Seminar and Workshop

    E-Print Network [OSTI]

    Seminar and Workshop Installing Small Wind Turbines Seminar and Workshop Location: Murdoch January 2011 Details for Registration and Payment: Mr Daniel Jones, National Small Wind Turbine Test: The National Small Wind Turbine Centre at Murdoch University is holding a Small Wind Turbine short training

  14. Proceedings of the International Workshop on Adaptation,

    E-Print Network [OSTI]

    Cantador, Iván

    Proceedings of the 1st International Workshop on Adaptation, Personalization and REcommendation. Carrero3 1 Universidad Autónoma de Madrid, Spain {ivan.cantador, david.vallet}@uam.es 2 Yahoo! Research.carrero}@uem.es #12;#12;Preface The 1st International Workshop on Adaptation, Personalization and REcommendation

  15. Fermilab Energy Scaling Workshop April 27, 2009

    E-Print Network [OSTI]

    Field, Richard

    Fermilab Energy Scaling Workshop April 27, 2009 Rick Field ­ Florida/CDF/CMS Page 1 11stst Workshop-bias" collisions and the "underlying event" in Run 1 at CDF. Rick's View of Hadron Collisions Fermilab 2009 Studying the "associated" charged particle densities in "min-bias" collisions. #12;Fermilab Energy Scaling

  16. Proceedings: 2003 ASME/EPRI Radwaste Workshop

    SciTech Connect (OSTI)

    None

    2004-05-01T23:59:59.000Z

    Nuclear utilities are continually evaluating methods to improve operations and reduce costs associated with radioactive waste management. The 26th Annual ASME/EPRI Workshop facilitates this effort by communicating technology and management improvements throughout the industry. This workshop, restricted to utility radwaste professionals, also serves to communicate practical in-plant improvements with the opportunity to discuss them in detail.

  17. Proceedings: 2002 ASME/EPRI Radwaste Workshop

    SciTech Connect (OSTI)

    None

    2002-11-01T23:59:59.000Z

    Nuclear utilities are continually evaluating methods to improve operations and reduce costs associated with radioactive waste management. The 25th Annual ASME/EPRI Workshop facilitates this effort by communicating technology and management improvements throughout the industry. This workshop, restricted to utility radwaste professionals, also serves to communicate practical in-plant improvements with the opportunity to discuss them in detail.

  18. Geometry is a verb Workshop @ 2009 NCTM

    E-Print Network [OSTI]

    Watanabe, Tad

    Geometry is a verb Workshop @ 2009 NCTM Tad Watanabe Kennesaw State University e-mail: twatanab@kennesaw.edu "Geometry" Is A Verb: Making Elementary School Geometry Come Alive Tad Watanabe Kennesaw State University://science.kennesaw.edu/~twatanab/ #12;Geometry is a verb Workshop @ 2009 NCTM Tad Watanabe Kennesaw State University http

  19. 2010 California Solar Workshop May 11, 2010

    E-Print Network [OSTI]

    2010 California Solar Workshop May 11, 2010 Alumni Center, UC Davis, Davis, California Sponsored by California Solar Energy Collaborative UC Davis Energy Institute SOLAR WORKSHOP 2010 California Solar Energy and discuss innovative ways to developing and expanding the utilization of solar power in California. The one

  20. Hydrogen Storage Materials Workshop Proceedings Workshop, October 16th,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:GroundtoProduction TechnicalSensor WorkshopM M a a|2002 |

  1. Beam History

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6 M. Babzien, I. Ben-Zvi, P. StudyBeam History Print Beamline

  2. Beam History

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6 M. Babzien, I. Ben-Zvi, P. StudyBeam History Print

  3. Beam Transport

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6 M. Babzien, I. Ben-Zvi, P. StudyBeam History

  4. Beam Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformationCenterResearch HighlightsToolsBES ReportsExperimentBasicBeam Status Print mA

  5. DOE NABIR PI Workshop: Abstracts 2002

    SciTech Connect (OSTI)

    Hawkes (Editor), Dan

    2002-01-09T23:59:59.000Z

    The mission of the NABIR program is to provide the fundamental science that will serve as the basis for the development of cost-effective bioremediation and long-term stewardship of radionuclides and metals in the subsurface at DOE sites. The focus of the program is on strategies leading to long-term immobilization of contaminants in place to reduce the risk to humans and the environment. Contaminants of special interest are uranium, technetium, plutonium, chromium, and mercury. The focus of the NABIR program is on the bioremediation of these contaminants in the subsurface below the root zone, including both vadose and saturated zones. The program is implemented through four interrelated scientific research elements (Biogeochemistry, Biomolecular Science and Engineering, Biotransformation, and Community Dynamics/Microbial Ecology); and through an element called Bioremediation and its Societal Implications and Concerns (BASIC), which addresses societal issues and potential concerns of stakeholders. The material presented at this year's workshop focuses on approximately 60 research projects funded in FY 2000-2002 by DOE's Office of Biological and Environmental Research (BER). Abstracts of NABIR research projects are provided in this book.

  6. DOE-NABIR PI Workshop: Abstracts 2003

    SciTech Connect (OSTI)

    Various

    2003-01-28T23:59:59.000Z

    The mission of the NABIR program is to provide the fundamental science that will serve as the basis for the development of cost-effective bioremediation and long-term stewardship of radionuclides and metals in the subsurface at DOE sites. The focus of the program is on strategies leading to long-term immobilization of contaminants in situ to reduce the risk to humans and the environment. Contaminants of special interest are uranium, technetium, plutonium, chromium, and mercury. The focus of the NABIR program is on the bioremediation of these contaminants in the subsurface below the root zone, including both vadose and saturated zones. The program consists of four interrelated Science Elements (Biotransformation, Community Dynamics/Microbial Ecology, Biomolecular Science and Engineering, and Biogeochemistry). The program also has a cross-cutting Assessment Element that supports development of innovative approaches and technologies to support the science elements. An element called Bioremediation and its Societal Implications and Concerns (BASIC) addresses potential societal issues of implementing NABIR scientific findings. The material presented at this year's workshop focuses on approximately 60 research projects funded in FY 2000-2003 by the Environmental Remediation Sciences Division in DOE's Office of Biological and Environmental Research (BER) in the Office of Science. Abstracts of NABIR research projects are provided in this book.

  7. EVIA 2007: The First International Workshop on Evaluating Information

    E-Print Network [OSTI]

    Sanderson, Mark

    proceedings for the workshop can be found at http://research.nii.ac.jp/ntcir/workshop/OnlineProceedings6EVIA 2007: The First International Workshop on Evaluating Information Access WORKSHOP REPORT to Information Access research for decades. As retrieval has become more pervasive and diverse, the need

  8. Gary Feldman 1 Fermilab Workshop Multiple Measurements and

    E-Print Network [OSTI]

    Feldman, Gary

    Gary Feldman 1 Fermilab Workshop Multiple Measurements and Parameters in the Unified Approach Gary Feldman Workshop on Confidence Limits Fermilab March 28, 2000 #12;Gary Feldman 2 Fermilab Workshop Origins Feldman 3 Fermilab Workshop Lack of Uniformly Most Powerful Test · Error of the first kind: Rejecting

  9. Project-X Workshop 120 GeV Target

    E-Print Network [OSTI]

    McDonald, Kirk

    Project-X Workshop 120 GeV Target Summary ­ Workshop # 1 N. Simos, M. Martens #12;Project-X Workshop Challenges OVERVIEW Driven by 120 GeV/170 TP-per-spill · Short Term: 170 TPs/2us-spill (materials an existing 400 kW facility ­ Constraints #12;Project-X Workshop Presentations - Discussions · Engineering

  10. Beam geometry selection using sequential beam addition

    SciTech Connect (OSTI)

    Popple, Richard A., E-mail: rpopple@uabmc.edu; Brezovich, Ivan A.; Fiveash, John B. [Department of Radiation Oncology, The University of Alabama at Birmingham, 1720 2nd Avenue South, Birmingham, Alabama 35294 (United States)] [Department of Radiation Oncology, The University of Alabama at Birmingham, 1720 2nd Avenue South, Birmingham, Alabama 35294 (United States)

    2014-05-15T23:59:59.000Z

    Purpose: The selection of optimal beam geometry has been of interest since the inception of conformal radiotherapy. The authors report on sequential beam addition, a simple beam geometry selection method, for intensity modulated radiation therapy. Methods: The sequential beam addition algorithm (SBA) requires definition of an objective function (score) and a set of candidate beam geometries (pool). In the first iteration, the optimal score is determined for each beam in the pool and the beam with the best score selected. In the next iteration, the optimal score is calculated for each beam remaining in the pool combined with the beam selected in the first iteration, and the best scoring beam is selected. The process is repeated until the desired number of beams is reached. The authors selected three treatment sites, breast, lung, and brain, and determined beam arrangements for up to 11 beams from a pool comprised of 25 equiangular transverse beams. For the brain, arrangements were additionally selected from a pool of 22 noncoplanar beams. Scores were determined for geometries comprised equiangular transverse beams (EQA), as well as two tangential beams for the breast case. Results: In all cases, SBA resulted in scores superior to EQA. The breast case had the strongest dependence on beam geometry, for which only the 7-beam EQA geometry had a score better than the two tangential beams, whereas all SBA geometries with more than two beams were superior. In the lung case, EQA and SBA scores monotonically improved with increasing number of beams; however, SBA required fewer beams to achieve scores equivalent to EQA. For the brain case, SBA with a coplanar pool was equivalent to EQA, while the noncoplanar pool resulted in slightly better scores; however, the dose-volume histograms demonstrated that the differences were not clinically significant. Conclusions: For situations in which beam geometry has a significant effect on the objective function, SBA can identify arrangements equivalent to equiangular geometries but using fewer beams. Furthermore, SBA provides the value of the objective function as the number of beams is increased, allowing the planner to select the minimal beam number that achieves the clinical goals. The method is simple to implement and could readily be incorporated into an existing optimization system.

  11. Proceedings of the 1987 coatings for advanced heat engines workshop

    SciTech Connect (OSTI)

    Not Available

    1987-01-01T23:59:59.000Z

    This Workshop was conducted to enhance communication among those involved in coating development for improved heat engine performance and durability. We were fortunate to have Bill Goward review the steady progress and problems encountered along the way in the use of thermal barrier coatings (TBC) in aircraft gas turbine engines. Navy contractors discussed their work toward the elusive goal of qualifying TBC for turbine airfoil applications. In the diesel community, Caterpillar and Cummins are developing TBC for combustion chamber components as part of the low heat rejection diesel engine concept. The diesel engine TBC work is based on gas turbine technology with a goal of more than twice the thickness used on gas turbine engine components. Adoption of TBC in production for diesel engines could justify a new generation of plasma spray coating equipment. Increasing interests in tribology were evident in this Workshop. Coatings have a significant role in reducing friction and wear under greater mechanical loadings at higher temperatures. The emergence of a high temperature synthetic lubricant could have an enormous impact on diesel engine design and operating conditions. The proven coating processes such as plasma spray, electron-beam physical vapor deposition, sputtering, and chemical vapor deposition have shown enhanced capabilities, particularly with microprocessor controls. Also, the newer coating schemes such as ion implantation and cathodic arc are demonstrating intriguing potential for engine applications. Coatings will play an expanding role in higher efficiency, more durable heat engines.

  12. National stakeholder workshop summary report

    SciTech Connect (OSTI)

    NONE

    1996-06-01T23:59:59.000Z

    This is a summary of the plenary sessions and small group discussion sessions from the fourth National Stakeholder Workshop sponsored by the DOE Office of Worker and Community Transition held in Atlanta, Georgia on March 13--15, 1996. Topics of the sessions included work force planning and restructuring, worker participation in health and safety, review of actions and commitments, lessons learned in collective bargaining agreements, work force restructuring guidance, work force planning, update on community transition activities. Also included are appendices listing the participants and DOE contacts.

  13. Environmental Management Science Program Workshop

    SciTech Connect (OSTI)

    None

    1998-07-01T23:59:59.000Z

    This program summary book is a compendium of project summaries submitted by principal investigators in the Environmental Management Science Program and Environmental Management/Energy Research Pilot Collaborative Research Program (Wolf-Broido Program). These summaries provide information about the most recent project activities and accomplishments. All projects will be represented at the workshop poster sessions, so you will have an opportunity to meet with the researchers. The projects will be presented in the same order at the poster session as they are presented in this summary book. Detailed questions about an individual project may be directed to the investigators involved.

  14. Midwest Transmission Workshop I Summary

    SciTech Connect (OSTI)

    Kevin Bryan

    2001-05-01T23:59:59.000Z

    OAK-B135 The meeting was opened with a review of the purposes of the workshop: (1) Present and discuss key studies and assessments of transmission upgrades, additions and related issues for the upper Midwest, including work that addresses the full range of views on these topics; (2) Understand the various transmission issues in the upper Midwest and discuss options for addressing the issues; and (3) Identify the decision makers and entities that need to play an active role if transmission issues are to be resolved, and agree on next steps for engaging these individuals and organizations through education, outreach, and information dissemination.

  15. Workshop2011Final.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun1 TableContacts WorkshopTradingChallenges a nd

  16. WCI-III Workshop Recap

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlongUpdatesValleyJablonowskiWCI-III Recap Workshop

  17. EERE Quality Control Workshop Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat Pump Models |Conduct,Final9:Department of EnergyQC Workshop Agenda December

  18. OpenEI Community - workshop

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth'sOklahoma/Geothermal < Oklahomast,Logistics Agency (DLA)workshop-grc

  19. Sandia National Laboratories: PV Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik Spoerke SSLSMolten-SaltReliability PV Systems ReliabilityWorkshops PV

  20. Using Temporal Logic for Dynamic Reconfigurations of Components

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Using Temporal Logic for Dynamic Reconfigurations of Components Julien Dormoy1 , Olga Kouchnarenko1, published in "7th International Workshop on Formal Aspects of Component Software - FACS'2010 (2010)" #12

  1. Dynamics and Thermodynamics of Blackholes and Naked Singularities

    E-Print Network [OSTI]

    Lorenzo Fatibene; Mauro Francaviglia; Roberto Giambo'; Giulio Magli

    2005-12-15T23:59:59.000Z

    Proceedings of the international Workshop on ``Dynamics and Thermodynamics of Blackholes and Naked Singularities``, that took place at the Department of Mathematics of the Politecnico of Milano from 13 to 15 May 2004.

  2. Beam-Bem interactions

    SciTech Connect (OSTI)

    Kim, Hyung Jin; /Fermilab

    2011-12-01T23:59:59.000Z

    In high energy storage-ring colliders, the nonlinear effect arising from beam-beam interactions is a major source that leads to the emittance growth, the reduction of beam life time, and limits the collider luminosity. In this paper, two models of beam-beam interactions are introduced, which are weak-strong and strong-strong beam-beam interactions. In addition, space-charge model is introduced.

  3. Upgrade of laser and electron beam welding database

    E-Print Network [OSTI]

    Furman, Magdalena

    2014-01-01T23:59:59.000Z

    The main purpose of this project was to fix existing issues and update the existing database holding parameters of laser-beam and electron-beam welding machines. Moreover, the database had to be extended to hold the data for the new machines that arrived recently at the workshop. As a solution - the database had to be migrated to Oracle framework, the new user interface (using APEX) had to be designed and implemented with the integration with the CERN web services (EDMS, Phonebook, JMT, CDD and EDH).

  4. Magnetization dynamics and interface studies in ion-beam sputtered Si/CoFeB(8)/MgO(4)/CoFeB(8)/Ta(5) structures

    SciTech Connect (OSTI)

    Raju, M.; Behera, Nilamani; Pandya, Dinesh K., E-mail: dkpandya@physics.iitd.ac.in; Chaudhary, Sujeet [Thin Film Laboratory, Department of Physics, Indian Institute of Technology Delhi, New Delhi 110016 (India)

    2014-05-07T23:59:59.000Z

    The interface roughness, Boron distribution in bulk CoFeB and at interface, Gilbert damping constant (?), and inhomogeneous broadening in ion-beam sputtered Si/CoFeB(8)/MgO(4)/CoFeB(8)/Ta(5) structures are found to be sensitive to the MgO growth process. The ion-assist and reactive growth processes that result in sharper interfaces of width ?0.5?nm lead to smaller ? of 0.0050?±?0.0003 and 0.0060?±?0.0002 and inhomogeneous broadening ?H{sub 0} of 3?±?0.3 and 1?±?0.3?Oe, respectively. On the other hand, the post-oxidation method results in rough interface and higher retention of Boron in CoFeB leading to higher values for ? and ?H{sub 0} as 0.0080?±?0.0006 and 5?±?0.3?Oe, respectively.

  5. HTS Wire Development Workshop: Proceedings

    SciTech Connect (OSTI)

    Not Available

    1994-07-01T23:59:59.000Z

    The 1994 High-Temperature Superconducting Wire Development Workshop was held on February 16--17 at the St. Petersburg Hilton and Towers in St. Petersburg, Florida. The meeting was hosted by Florida Power Corporation and sponsored by the US Department of Energy`s Superconductivity Program for Electric Power Systems. The meeting focused on recent high-temperature superconducting wire development activities in the Department of Energy`s Superconductivity Systems program. The meeting opened with a general discussion on the needs and benefits of superconductivity from a utility perspective, the US global competitiveness position, and an outlook on the overall prospects of wire development. The meeting then focused on four important technology areas: Wire characterization: issues and needs; technology for overcoming barriers: weak links and flux pinning; manufacturing issues for long wire lengths; and physical properties of HTS coils. Following in-depth presentations, working groups were formed in each technology area to discuss the most important current research and development issues. The working groups identified research areas that have the potential for greatly enhancing the wire development effort. These areas are discussed in the summary reports from each of the working groups. This document is a compilation of the workshop proceedings including all general session presentations and summary reports from the working groups.

  6. Proceedings of the geosciences workshop

    SciTech Connect (OSTI)

    none,

    1991-01-01T23:59:59.000Z

    The manuscripts in these proceedings represent current understanding of geologic issues associated with the Weldon Spring Site Remedial Action Project (WSSRAP). The Weldon Spring site is in St. Charles County, Missouri. The proceedings are the record of the information presented during the WSSRAP Geosciences Workshop conducted on February 21, 1991. The objective of the workshop and proceedings is to provide the public and scientific community with technical information that will facilitate a common understanding of the geology of the Weldon Spring site, of the studies that have been and will be conducted, and of the issues associated with current and planned activities at the site. This coverage of geologic topics is part of the US Department of Energy overall program to keep the public fully informed of the status of the project and to address public concerns as we clean up the site and work toward the eventual release of the property for use by this and future generations. Papers in these proceedings detail the geology and hydrology of the site. The mission of the WSSRAP derives from the US Department of Energy's Surplus Facilities Management Program. The WSSRAP will eliminate potential hazards to the public and the environment and make surplus real property available for other uses to the extent possible. This will be accomplished by conducting remedial actions which will place the quarry, the raffinate pits, the chemical plant, and the vicinity properties in a radiologically and chemically safe condition. The individual papers have been catalogued separately.

  7. World-Systems as Dynamic Networks

    E-Print Network [OSTI]

    White, Douglas R.

    World-Systems as Dynamic Networks Christopher Chase-Dunn Institute for Research on World-Systems on comparative world-systems for the workshop on `analyzing complex macrosystems as dynamic networks" at the Santa Fe Institute, April 29- 30, 2004. (8341 words) v. 4-22-04 1 #12;The comparative world-systems

  8. PHEV Market Introduction Workshop Summary Report

    SciTech Connect (OSTI)

    Weber, Adrienne M [ORNL; Sikes, Karen R [ORNL

    2009-03-01T23:59:59.000Z

    The Plug-In Hybrid Electric Vehicle (PHEV) Market Introduction Study Workshop was attended by approximately forty representatives from various stakeholder organizations. The event took place at the Hotel Helix in Washington, D.C. on December 1-2, 2008. The purpose of this workshop was to follow-up last year s PHEV Value Proposition Study, which showed that indeed, a viable and even thriving market for these vehicles can exist by the year 2030. This workshop aimed to identify immediate action items that need to be undertaken to achieve a successful market introduction and ensuing large market share of PHEVs in the U.S. automotive fleet.

  9. What future for nuclear power? Workshop report

    SciTech Connect (OSTI)

    NONE

    1998-12-31T23:59:59.000Z

    A Workshop on this highly controversial subject, organized by the Energy and Environment Programme of the RIIA, was held on 10th November 1997 at Green College, Oxford. The meeting was attended by some forty people from eight countries, coming from the nuclear and electricity generating industry, governments, research organizations, academic institutions, environmental pressure groups and inter-governmental organizations. In addition, subsequent to this Workshop, there have been a number of smaller, more informal discussions on various aspects of the subject. This paper summarizes the main conclusions arising from the Workshop and from these later discussions.

  10. Renew Workshop on Fusion-Fission Hybrids

    E-Print Network [OSTI]

    of Final Report #12;4 The Workshop Sponsored by OFES, NE, NNSA About 100 attendees From fusion (DOE) DOE NNSA perspective Kirk Levedahl (DOE) Nuclear industry perspective Adrian Heymer (NEI

  11. Climate Workshops for Department Chairs Introduction

    E-Print Network [OSTI]

    Sheridan, Jennifer

    #12;Climate Workshops for Department Chairs Introduction Why focus on Department Chairs? Goals participating departments Evidence from Campus-wide Climate Surveys #12;Why focus on Department Chairs? Individuals experience climate in their immediate workplace ­ the department Chairs can significantly

  12. Workshop at SIGGRAPH Asia 2012 Program Handbook

    E-Print Network [OSTI]

    Thawonmas, Ruck

    -West line (green) Make a transfer at Buona Vista station to the Circle line (yellow) If travelling along the registration. Tea breaks 2 Tea breaks are provided each day for workshop attendees. The tea breaks will be held

  13. 2014 University Turbine Systems Research Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    University Turbine Systems Research Workshop October 21-24, 2014 Accommodations Union Club Hotel 101 N. Grant Street West Lafayette, IN 47907 The Union Club Hotel will be the...

  14. Demonstration and Deployment Strategy Workshop: Summary

    Broader source: Energy.gov [DOE]

    This report is based on the proceedings of the U.S. DOE’s Bioenergy Technologies Office Demonstration and Deployment Strategy Workshop, held on March 12–13, 2014, at Argonne National Laboratory.

  15. Fifteenth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Not Available

    1990-01-01T23:59:59.000Z

    The Fifteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 23--25, 1990. Major topics included: DOE's geothermal research and development program, well testing, field studies, geosciences, geysers, reinjection, tracers, geochemistry, and modeling.

  16. Process Integration and Carbon Efficiency Workshop Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Carbon Efficiency Workshop Agenda June 11-12, 2014 Sheraton Denver West Hotel Lakewood, Colorado Day 1: June 11, 2014 7:30 a.m. Registration and Coffee 8:30 a.m. Welcome-Leslie...

  17. Alaska Native Village Energy Development Workshop

    Broader source: Energy.gov [DOE]

    Presented by the DOE Office of Indian Energy and Tribal Energy Program, this workshop is designed to help Alaska Native villages and corporations understand the range of energy efficiency and...

  18. Waste-to-Energy Roadmapping Workshop Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Waste-to-Energy Workshop Agenda November 5-6, 2014 DoubleTree Hotel Crystal City Arlington, VA 22202 Day 1: Wednesday, November 5, 2014 Time Activity 7:30 am Registration and...

  19. Systems Analysis Workshop List of Attendees

    Broader source: Energy.gov [DOE]

    List of Attendees from DOE Systems Analysis Workshop held in Washington, D.C. July 28-29, 2004 to discuss and define role of systems analysis in DOE Hydrogen Program.

  20. DOE Alaska Native Village Renewable Energy Workshop

    Broader source: Energy.gov [DOE]

    The Department of Energy Office of Indian Energy Policy and Programs and Office of Energy Efficiency and Renewable Energy Tribal Energy Program are offering a 2-day workshop for Alaska Native...

  1. Beyond moore computing research challenge workshop report.

    SciTech Connect (OSTI)

    Huey, Mark C. [Perspectives, Inc., Albuquerque, NM; Aidun, John Bahram

    2013-10-01T23:59:59.000Z

    We summarize the presentations and break out session discussions from the in-house workshop that was held on 11 July 2013 to acquaint a wider group of Sandians with the Beyond Moore Computing research challenge.

  2. EM Hosts Used Fuel Management Workshop

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – EM’s Office of Nuclear Materials Disposition held a workshop with Swedish executives earlier this month to learn about their approaches to designing a national waste management program.

  3. NERSC/DOE NP Requirements Workshop Logistics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Physics May 26-27, 2011 Location The workshop will be held at Hyatt Regency Bethesda One Bethesda Metro Center (7400 Wisconsin Ave) Bethesda, Maryland, USA 20814 Tel: +1...

  4. Towards Truly Ubiquitous and Opportunistic Trust Infrastructures: Position for Next Generation Cybersecurity Infrastructure Workshop

    E-Print Network [OSTI]

    Tennessee, University of

    : Position for Next Generation Cybersecurity Infrastructure Workshop Stephen Nightingale Generation Cybersecurity Infrastructure workshop, we note that Federated Identities [1

  5. PROCEEDINGS, Thirty-Sixth Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, California, January 31 -February 2, 2011

    E-Print Network [OSTI]

    Stanford University

    PROCEEDINGS, Thirty-Sixth Workshop on Geothermal Reservoir Engineering Stanford University as the dynamic properties of the fluid flowing both through the wellbore and the reservoir. It is known that Petroleum and Geothermal fluids have similar properties in terms of well testing. In this regard, almost

  6. Exascale Workshop Panel Report Meeting

    SciTech Connect (OSTI)

    Khaleel, Mohammad A.

    2010-07-01T23:59:59.000Z

    The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusions with regard to the justification of a DOE-led exascale initiative.

  7. BrainMap `95 workshop

    SciTech Connect (OSTI)

    NONE

    1995-12-31T23:59:59.000Z

    The fourth annual BrainMap workshop was held at La Mansion del Rio Hotel in San Antonio December 3--4, 1995. The conference title was ``Human Brain Mapping and Modeling.`` The meeting was attended by 137 registered participants and 30 observers from 82 institutions representing 12 countries. The meeting focused on the technical issues associated with brain mapping and modeling. A total of 23 papers were presented covering the following topics: spatial normalization and registration; functional image analysis; metanalysis and modeling; and new horizons in biological databases. The full program with abstracts was available on the Research Imaging Center`s web site. A book will be published by John Wiley and Sons prior to the end of 1998.

  8. Proceedings: 2001 ASME/EPRI Radwaste Workshop

    SciTech Connect (OSTI)

    None

    2001-12-01T23:59:59.000Z

    Nuclear utilities continually evaluate methods to improve operations and reduce costs associated with radioactive waste management. The continuing deregulation process has increased the emphasis on this activity. The Annual ASME/EPRI Workshop facilitates this effort by communicating technology and management improvements throughout the industry. This workshop, restricted to utility radwaste professionals, also serves to communicate practical in-plant improvements with the opportunity to discuss them in detail.

  9. Systems and methods of varying charged particle beam spot size

    DOE Patents [OSTI]

    Chen, Yu-Jiuan

    2014-09-02T23:59:59.000Z

    Methods and devices enable shaping of a charged particle beam. A modified dielectric wall accelerator includes a high gradient lens section and a main section. The high gradient lens section can be dynamically adjusted to establish the desired electric fields to minimize undesirable transverse defocusing fields at the entrance to the dielectric wall accelerator. Once a baseline setting with desirable output beam characteristic is established, the output beam can be dynamically modified to vary the output beam characteristics. The output beam can be modified by slightly adjusting the electric fields established across different sections of the modified dielectric wall accelerator. Additional control over the shape of the output beam can be excreted by introducing intentional timing de-synchronization offsets and producing an injected beam that is not fully matched to the entrance of the modified dielectric accelerator.

  10. Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert SouthwestTechnologies | Blandine Jerome Careers atWorking with Us Overview

  11. Multipulsed dynamic moire interferometer

    DOE Patents [OSTI]

    Deason, Vance A. (Idaho Falls, ID)

    1991-01-01T23:59:59.000Z

    An improved dynamic moire interferometer comprised of a lasing medium providing a plurality of beams of coherent light, a multiple q-switch producing multiple trains of 100,000 or more pulses per second, a combining means collimating multiple trains of pulses into substantially a single train and directing beams to specimen gratings affixed to a test material, and a controller, triggering and sequencing the emission of the pulses with the occurrence and recording of a dynamic loading event.

  12. THE THIRD CLOUD RETRIEVAL EVALUATION WORKSHOP What: A joint European/United States workshop

    E-Print Network [OSTI]

    Baum, Bryan A.

    THE THIRD CLOUD RETRIEVAL EVALUATION WORKSHOP What: A joint European/United States workshop louds strongly modulate the energy balance of Earth and its atmosphere through their interaction- based cloud retrieval teams to share their experience with state-of-the-art cloud parameter retrievals

  13. Workshop Programme Workshop on the Representation and Processing of Sign Languages

    E-Print Network [OSTI]

    :00 Workshop closing #12;ii Workshop Organisers Onno Crasborn, Radboud University Nijmegen, the Netherlands, Amsterdam, the Netherlands Inge Zwitserlood, Radboud University Nijmegen, the Netherlands Programme of Contents Title Page Patricia Álvarez Sánchez, Inmaculada C. Báez Montero, Ana Mª Fernández Soneira

  14. First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains: Workshop Proceedings

    SciTech Connect (OSTI)

    Gevorgian, V.; Link, H.; McDade, M.; Mander, A.; Fox, J. C.; Rigas, N.

    2013-11-01T23:59:59.000Z

    This report summarizes the proceedings of the First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains, held from June 13 to 14, 2013, at the National Renewable Energy Laboratory's National Wind Technology Center, located south of Boulder, Colorado. The workshop was sponsored by the U.S. Department of Energy and cohosted by the National Renewable Energy Laboratory and Clemson University under ongoing collaboration via a cooperative research and development agreement. The purpose of the workshop was to provide a forum to discuss the research, testing needs, and state-of-the-art apparatuses involved in grid compliance testing of utility-scale wind turbine generators. This includes both dynamometer testing of wind turbine drivetrains ('ground testing') and field testing grid-connected wind turbines. Four sessions followed by discussions in which all attendees of the workshop were encouraged to participate comprised the workshop.

  15. Thirteenth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Brigham, W.E.; Miller, F.G.; Cook, J.W. (Stanford Geothermal Program)

    1988-01-21T23:59:59.000Z

    PREFACE The Thirteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 19-21, 1988. Although 1987 continued to be difficult for the domestic geothermal industry, world-wide activities continued to expand. Two invited presentations on mature geothermal systems were a keynote of the meeting. Malcolm Grant presented a detailed review of Wairakei, New Zealand and highlighted plans for new development. G. Neri summarized experience on flow rate decline and well test analysis in Larderello, Italy. Attendance continued to be high with 128 registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, New Zealand, Japan, Mexico and The Philippines. A discussion of future workshops produced a strong recommendation that the Stanford Workshop program continue for the future. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Four technical papers not presented at the Workshop are also published. In addition to these forty five technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was Gustavo Calderon from the Inter-American Development Bank. We thank him for sharing with the Workshop participants a description of the Bank???s operations in Costa Rica developing alternative energy resources, specifically Geothermal, to improve the country???s economic basis. His talk appears as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: J. Combs, G. T. Cole, J. Counsil, A. Drenick, H. Dykstra, K. Goyal, P. Muffler, K. Pruess, and S. K. Sanyal. The Workshop was organized by the Stanford Geothermal Program faculty, staff and students. We would like to thank Marilyn King, Pat Oto, Terri Ramey, Bronwyn Jones, Yasmin Gulamani, and Rosalee Benelli for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment, especially Jeralyn Luetkehans. The Thirteenth Workshop was supported by the Geothermal Technology Division of the U.S. Department of Energy through Contract No. DE-AS07-84ID12529. We deeply appreciate this continued support. Henry J. Ramey, Jr. Paul Kruger Roland N. Horne William E. Brigham Frank G. Miller Jean W. Cook

  16. Nineteenth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Horne, R.J.; Kruger, P.; Miller, F.G.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

    1994-01-20T23:59:59.000Z

    PREFACE The Nineteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 18-20, 1994. This workshop opened on a sad note because of the death of Prof. Henry J. Ramey, Jr. on November 19, 1993. Hank had been fighting leukemia for a long time and finally lost the battle. Many of the workshop participants were present for the celebration of his life on January 21 at Stanford's Memorial Church. Hank was one of the founders of the Stanford Geothermal Program and the Geothermal Reservoir Engineering Workshop. His energy, kindness, quick wit, and knowledge will long be missed at future workshops. Following the Preface we have included a copy of the Memorial Resolution passed by the Stanford University Senate. There were one hundred and four registered participants. Participants were from ten foreign countries: Costa Rica, England, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, Philippines and Turkey. Workshop papers described the performance of fourteen geothermal fields outside the United States. Roland N. Home opened the meeting and welcomed the visitors to the campus. The key note speaker was J.E. ''Ted'' Mock who gave a presentation about the future of geothermal development. The banquet speaker was Jesus Rivera and he spoke about Energy Sources of Central American Countries. Forty two papers were presented at the Workshop. Technical papers were organized in twelve sessions concerning: sciences, injection, production, modeling, and adsorption. Session chairmen are an important part of the workshop and our thanks go to: John Counsil, Mark Walters, Dave Duchane, David Faulder, Gudmundur Bodvarsson, Jim Lovekin, Joel Renner, and Iraj Ershaghi. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual equipment and to Xianfa Deng who coordinated the meeting arrangements for the Workshop. Roland N. Home Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook

  17. Status of compact-toroid research using high energy particle beams

    SciTech Connect (OSTI)

    None

    1980-10-01T23:59:59.000Z

    A workshop on the use of high-energy particle beams to generate compact-toroid plasma geometries was held at the Department of Energy (Germantown) on June 26-27, 1980, for the purpose of assisting the Division of Applied Plasma Physics in formulating program plans for this work, and assessing its importance relative to the rest of the compact toroid (CT) program. The scope of the workshop is given in Appendix A, and the charge to the panel of advisors responsible for writing this report is given in Appendix B.

  18. Eleventh workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Counsil, J.R. (Stanford Geothermal Program)

    1986-01-23T23:59:59.000Z

    The Eleventh Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 21-23, 1986. The attendance was up compared to previous years, with 144 registered participants. Ten foreign countries were represented: Canada, England, France, Iceland, Indonesia, Italy, Japan, Mexico, New Zealand and Turkey. There were 38 technical presentations at the Workshop which are published as papers in this Proceedings volume. Six technical papers not presented at the Workshop are also published and one presentation is not published. In addition to these 45 technical presentations or papers, the introductory address was given by J. E. Mock from the Department of Energy. The Workshop Banquet speaker was Jim Combs of Geothermal Resources International, Inc. We thank him for his presentation on GEO geothermal developments at The Geysers. The chairmen of the technical sessions made an important contribution to the Workshop. Other than Stanford faculty members they included: M. Gulati, E. Iglesias, A. Moench, S. Prestwich, and K. Pruess. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank J.W. Cook, J.R. Hartford, M.C. King, A.E. Osugi, P. Pettit, J. Arroyo, J. Thorne, and T.A. Ramey for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment. The Eleventh Workshop was supported by the Geothermal Technology Division of the U.S. Department of Energy through Contract DE-AS03-80SF11459. We deeply appreciate this continued support. January 1986 H.J. Ramey, Jr. P. Kruger R.N. Horne W.E. Brigham F.G. Miller J.R. Counsil

  19. Report on the Second Workshop on Distributed AI

    E-Print Network [OSTI]

    Davis, Randall

    On June 24, 1981 twenty-five participants from organizations around the country gathered in MIT's Endicott House for the Second Annual Workshop on Distributed AI. The three-day workshop was designed as an informal meeting, ...

  20. Summary and recommendations: Total fuel cycle assessment workshop

    SciTech Connect (OSTI)

    NONE

    1995-08-01T23:59:59.000Z

    This report summarizes the activities of the Total Fuel Cycle Assessment Workshop held in Austin, Texas, during October 6--7, 1994. It also contains the proceedings from that workshop.

  1. Proceedings of the National Hydrogen Energy Roadmap Workshop...

    Broader source: Energy.gov (indexed) [DOE]

    National Hydrogen Energy Roadmap Workshop: Washington, DC; April 2-3, 2002 Proceedings of the National Hydrogen Energy Roadmap Workshop: Washington, DC; April 2-3, 2002 Summary of...

  2. Purdue Climate Change Research Center Emissions Trading Workshop

    E-Print Network [OSTI]

    Purdue Climate Change Research Center Emissions Trading Workshop Introduction and Overview manner. Workshop rather than conference. #12;What is Emissions Trading? (or "Cap and Trade") · Cap & Enforcement · Measurement, Reporting, and Verification (MRV) mechanisms for reductions #12;Five Emissions

  3. Workshop Provides Hands-On Project Development Training for 26...

    Office of Environmental Management (EM)

    power outages. Photo by John De La Rosa, NREL Workshop guest speaker Jana Ganion of Blue Lake Rancheria (shown here to the left sitting at a table with workshop participants)...

  4. Alaska Workshop: Renewable Energy Technologies and Case Studies

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy Office of Indian Energy is hosting two workshops at the Alaska Village Initiatives Rural Small Business Conference on Wednesday, February 12, 2014. Each workshop will...

  5. Waste-to-Energy Roadmapping Workshop | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Waste-to-Energy Roadmapping Workshop Waste-to-Energy Roadmapping Workshop November 5, 2014 9:00AM EST to November 6, 2014 12:00PM EST DoubleTree Hotel Crystal City 300 Army Navy...

  6. BEAM SIMULATIONS USING VIRTUAL DIAGNOSTICS FOR THE DRIVER LINAC

    SciTech Connect (OSTI)

    R. C. York; X. Wu; Q. Zhao

    2011-12-21T23:59:59.000Z

    End-to-end beam simulations for the driver linac have shown that the design meets the necessary performance requirements including having adequate transverse and longitudinal acceptances. However, to achieve reliable operational performance, the development of appropriate beam diagnostic systems and control room procedures are crucial. With limited R&D funding, beam simulations provide a cost effective tool to evaluate candidate beam diagnostic systems and to provide a critical basis for developing early commissioning and later operational activities. We propose to perform beam dynamic studies and engineering analyses to define the requisite diagnostic systems of the driver linac and through simulation to develop and test commissioning and operational procedures.

  7. SIT Workshops 1995 2011 Page 1 of 17

    E-Print Network [OSTI]

    Guyana Haiti Jamaica Saint Kitts and Nevis Saint Lucia Suriname Trinidad & Tobago 12. US-India Workshop

  8. W&M, JLab Host International Neutrino Workshop (William & Mary...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    wm.edunewsstories2012william--mary-hosts-international-neutrino-workshop123.php Submitted: Wednesday, July 18...

  9. Orchestrating Market Success: Seattle Market Introduction Workshop Video

    Broader source: Energy.gov [DOE]

    View the video from Jim Brodrick's opening presentation at the July 2011 DOE SSL Market Introduction Workshop in Seattle, Washington.

  10. Acceleration Architectures for Bioinformatics (2010 JGI/ANL HPC Workshop)

    ScienceCinema (OSTI)

    Gokhale, Maya

    2011-06-08T23:59:59.000Z

    Maya Gokhale of the Lawrence Livermore National Laboratory presents at the JGI/Argonne HPC Workshop on January 26, 2010

  11. Twelfth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Rivera, J. (Stanford Geothermal Program)

    1987-01-22T23:59:59.000Z

    Preface The Twelfth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 20-22, 1987. The year ending December 1986 was very difficult for the domestic geothermal industry. Low oil prices caused a sharp drop in geothermal steam prices. We expected to see some effect upon attendance at the Twelfth Workshop. To our surprise, the attendance was up by thirteen from previous years, with one hundred and fifty-seven registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, Japan, Mexico, New Zealand, and Turkey. Despite a worldwide surplus of oil, international geothermal interest and development is growing at a remarkable pace. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Seven technical papers not presented at the Workshop are also published; they concern geothermal developments and research in Iceland, Italy, and New Zealand. In addition to these forty-eight technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was John R. Berg from the Department of Energy. We thank him for sharing with the Workshop participants his thoughts on the expectations of this agency in the role of alternative energy resources, specifically geothermal, within the country???s energy framework. His talk is represented as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: M. Gulati, K. Goyal, G.S. Bodvarsson, A.S. Batchelor, H. Dykstra, M.J. Reed, A. Truesdell, J.S. Gudmundsson, and J.R. Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank Jean Cook, Marilyn King, Amy Osugi, Terri Ramey, and Rosalee Benelli for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment, specially Jim Lovekin. The Twelfth Workshop was supported by the Geothermal Technology Division of the U. S. Department of Energy through Contract Nos. DE-AS03-80SF11459 and DE-AS07- 84ID12529. We deeply appreciate this continued support. January 1987 Henry J. Ramey, Jr. Paul Kruger Roland N. Horne William E. Brigham Frank G. Miller Jesus Rivera

  12. ISO/IEC/NIST/OECD Workshop: FINAL REPORT June 2008 ISO, IEC, NIST and OECD International workshop on documentary standards

    E-Print Network [OSTI]

    ISO/IEC/NIST/OECD Workshop: FINAL REPORT June 2008 ISO, IEC, NIST and OECD International workshop and related procedures by the broader community. In particular, there is a pressing need to 1 of 40 #12;ISO

  13. Indirectly sensing accelerator beam currents for limiting maximum beam current magnitude

    DOE Patents [OSTI]

    Bogaty, J.M.; Clifft, B.E.; Bollinger, L.M.

    1995-08-08T23:59:59.000Z

    A beam current limiter is disclosed for sensing and limiting the beam current in a particle accelerator, such as a cyclotron or linear accelerator, used in scientific research and medical treatment. A pair of independently operable capacitive electrodes sense the passage of charged particle bunches to develop an RF signal indicative of the beam current magnitude produced at the output of a bunched beam accelerator. The RF signal produced by each sensing electrode is converted to a variable DC voltage indicative of the beam current magnitude. The variable DC voltages thus developed are compared to each other to verify proper system function and are further compared to known references to detect beam currents in excess of pre-established limits. In the event of a system malfunction, or if the detected beam current exceeds pre-established limits, the beam current limiter automatically inhibits further accelerator operation. A high Q tank circuit associated with each sensing electrode provides a narrow system bandwidth to reduce noise and enhance dynamic range. System linearity is provided by injecting, into each sensing electrode, an RF signal that is offset from the bunching frequency by a pre-determined beat frequency to ensure that subsequent rectifying diodes operate in a linear response region. The system thus provides a large dynamic range in combination with good linearity. 6 figs.

  14. Page 1 of 11 INTERNATIONAL WORKSHOP ON QUANTITATIVE FINANCE

    E-Print Network [OSTI]

    Jagannatham, Aditya K.

    Page 1 of 11 4th INTERNATIONAL WORKSHOP ON QUANTITATIVE FINANCE December 22nd to 25th , 2012 at IIT a four (4) days International Workshop on Quantitative Finance at IIT Kanpur, Kanpur, INDIA from 22nd December to 25th December 2012. Information about the Quantitative Finance Workshop The 4th International

  15. A Pilot Project in Preparation of an Aerodynamic Optimization Workshop

    E-Print Network [OSTI]

    Jameson, Antony

    A Pilot Project in Preparation of an Aerodynamic Optimization Workshop with Lessons Learned John C-scale Aerodynamic Optimization Workshop. Three independent optimization efforts were conducted concurrently, each in the preparation of a possible future workshop on aerodynamic shape optimization. 1.0 Introduction During AIAA

  16. 1High Performance Computing at Liberal Arts Colleges Workshop 3

    E-Print Network [OSTI]

    Barr, Valerie

    1High Performance Computing at Liberal Arts Colleges ­ Workshop 3 11October 27, 2009 Experiences (?) #12;2High Performance Computing at Liberal Arts Colleges ­ Workshop 3 22 Acknowledgements Thanks to. October 27, 2009 #12;3High Performance Computing at Liberal Arts Colleges ­ Workshop 3 33October 27, 2009

  17. Research Destination Turkey: Workshop Series on "European and

    E-Print Network [OSTI]

    Hasýrcý, Vasýf

    Research Destination Turkey: Workshop Series on "European and National Funding Opportunities in Turkish. #12;Research Destination Turkey : Workshop Series on "European and National Funding Opportunities Council of Turkey (TÃ?BTAK) will organize workshop on January 24, 2014 in Berlin, Germany. The event aims

  18. Report on the Workshop on Regulatory Approaches to Smart

    E-Print Network [OSTI]

    Report on the Workshop on Regulatory Approaches to Smart Grid Investment and Deployment May APEC Secretariat APEC#212-CT-04.2 #12;SCSC Smart Grid Workshop 2012 Page 1 Grid Investment and Deployment May 16-17, 2012 Quebec City, Canada #12;SCSC Smart Grid Workshop 2012

  19. Workshop on Thermonuclear Reaction Rates for Astrophysics Applications

    E-Print Network [OSTI]

    Workshop on Thermonuclear Reaction Rates for Astrophysics Applications 24-25 November 2011, Athens circular for the Workshop on Thermonuclear Reaction Rates for Astrophysics Applications, to be held of thermonuclear reaction rates. The topics of the workshop, in relation with thermonuclear reaction rates

  20. Flywheel Energy Storage technology workshop

    SciTech Connect (OSTI)

    O`Kain, D.; Howell, D. [comps.

    1993-12-31T23:59:59.000Z

    Advances in recent years of high strength/lightweight materials, high performance magnetic bearings, and power electronics technology has spurred a renewed interest by the transportation, utility, and manufacturing industries in Flywheel Energy Storage (FES) technologies. FES offers several advantages over conventional electro-chemical energy storage, such as high specific energy and specific power, fast charging time, long service life, high turnaround efficiency (energy out/energy in), and no hazardous/toxic materials or chemicals are involved. Potential applications of FES units include power supplies for hybrid and electric vehicles, electric vehicle charging stations, space systems, and pulsed power devices. Also, FES units can be used for utility load leveling, uninterruptable power supplies to protect electronic equipment and electrical machinery, and for intermittent wind or photovoltaic energy sources. The purpose of this workshop is to provide a forum to highlight technologies that offer a high potential to increase the performance of FES systems and to discuss potential solutions to overcome present FES application barriers. This document consists of viewgraphs from 27 presentations.

  1. Steam turbine/generator NDE workshop

    SciTech Connect (OSTI)

    Nottingham, L.D.; Sabourin, P.F. (Jones (J.A.) Applied Research Co., Charlotte, NC (USA))

    1990-11-01T23:59:59.000Z

    On September 12--15, 1989, EPRI sponsored a workshop in Charlotte, North Carolina on steam turbine/generator rotating components. The approximate 185 attendees represented a broad spectrum of utilities, equipment manufactures, forging suppliers, service organizations, universities, insurance carriers, and consultants from the United States and abroad. Canada, England, Finland, France, Germany, Japan, Korea, Italy, Spain, and Sweden were represented at the workshop, and 81 of the attendees represented 44 domestic utilities. Nondestructive examination equipment demonstrations by 16 vendors and 2 utilities at the EPRI NDE Center complemented the technical presentation. In addition to 23 formal, technical presentations of prepared papers of specific topics, 8 tutorial presentations, plus various opening and closing remarks and addresses, were given at the workshop. Presentations were organized under the following general topics: bucket blades and/or attachment regions; retaining rings; wheels/disks; steam turbine/generator testing and evaluation; and tutorials. Each individual paper has been cataloged separately.

  2. Research results and utility experience workshop: Proceedings

    SciTech Connect (OSTI)

    Not Available

    1994-08-01T23:59:59.000Z

    This workshop was sponsored by the Distributed Utility Valuation (DUV) Project-a joint effort of the National Renewable Energy Laboratory (NREL) Department of Energy (DOE), Electric Power Research Institute (EPRI), Pacific Northwest Laboratory (PNL) Department of Energy (DOE), and Pacific Gas & Electric Company (PG&E). The purpose of the workshop is to provide a forum for utilities, other research organizations, and regulatory agencies to share results and data on Distributed Utility (DU)-related research and applications. Up-to-date information provided insight into the various technologies available to utilities, the methods used to select the technologies, and case study results. The workshop was divided into three sessions: Planning Tools; Utility Experience; and Policy and Technology Implications. Brief summaries of the individual presentations from each session are attached as appendices.

  3. International workshop on cold neutron sources

    SciTech Connect (OSTI)

    Russell, G.J.; West, C.D. (comps.) (Los Alamos National Lab., NM (United States)) [comps.; Los Alamos National Lab., NM (United States)

    1991-08-01T23:59:59.000Z

    The first meeting devoted to cold neutron sources was held at the Los Alamos National Laboratory on March 5--8, 1990. Cosponsored by Los Alamos and Oak Ridge National Laboratories, the meeting was organized as an International Workshop on Cold Neutron Sources and brought together experts in the field of cold-neutron-source design for reactors and spallation sources. Eighty-four people from seven countries attended. Because the meeting was the first of its kind in over forty years, much time was spent acquainting participants with past and planned activities at reactor and spallation facilities worldwide. As a result, the meeting had more of a conference flavor than one of a workshop. The general topics covered at the workshop included: Criteria for cold source design; neutronic predictions and performance; energy deposition and removal; engineering design, fabrication, and operation; material properties; radiation damage; instrumentation; safety; existing cold sources; and future cold sources.

  4. 1993 DOE technical standards managers workshop: Proceedings

    SciTech Connect (OSTI)

    Not Available

    1993-12-31T23:59:59.000Z

    This workshop is focused on the benefits of the DOE technical standards program, which is focused toward the preferred use of non-Government standards for DOE activities and the development of DOE technical standards when non-Government standards are not available or are inappropriate. One goal of the program is to replace redundant site-specific standards with more universally accepted documents that have been scrutinized by experts. This replacement is discussed at the workshop along with the problems encountered and solutions found. The workshop provided an opportunity for geographically dispersed people to meet and advance their standards knowledge and efforts to support the program. Safety issues have been the driving force behind the program to date. Several companies offer products and services that support the development, processing, and retrieval of standards. This document mostly comprise vugraphs.

  5. International magnetic pulse compression workshop: (Proceedings)

    SciTech Connect (OSTI)

    Kirbie, H.C.; Newton, M.A.; Siemens, P.D.

    1991-04-01T23:59:59.000Z

    A few individuals have tried to broaden the understanding of specific and salient pulsed-power topics. One such attempt is this documentation of a workshop on magnetic switching as it applies primarily to pulse compression (power transformation), affording a truly international perspective by its participants under the initiative and leadership of Hugh Kirbie and Mark Newton of the Lawrence Livermore National Laboratory (LLNL) and supported by other interested organizations. During the course of the Workshop at Granlibakken, a great deal of information was amassed and a keen insight into both the problems and opportunities as to the use of this switching approach was developed. The segmented workshop format proved ideal for identifying key aspects affecting optimum performance in a variety of applications. Individual groups of experts addressed network and system modeling, magnetic materials, power conditioning, core cooling and dielectrics, and finally circuits and application. At the end, they came together to consolidate their input and formulate the workshop's conclusions, identifying roadblocks or suggesting research projects, particularly as they apply to magnetic switching's trump card--its high-average-power-handling capability (at least on a burst-mode basis). The workshop was especially productive both in the quality and quantity of information transfer in an environment conducive to a free and open exchange of ideas. We will not delve into the organization proper of this meeting, rather we wish to commend to the interested reader this volume, which provides the definitive and most up-to-date compilation on the subject of magnetic pulse compression from underlying principles to current state of the art as well as the prognosis for the future of magnetic pulse compression as a consensus of the workshop's organizers and participants.

  6. Mixed waste focus area alternative technologies workshop

    SciTech Connect (OSTI)

    Borduin, L.C.; Palmer, B.A.; Pendergrass, J.A. [Los Alamos National Lab., NM (United States). Technology Analysis Group

    1995-05-24T23:59:59.000Z

    This report documents the Mixed Waste Focus Area (MWFA)-sponsored Alternative Technology Workshop held in Salt Lake City, Utah, from January 24--27, 1995. The primary workshop goal was identifying potential applications for emerging technologies within the Options Analysis Team (OAT) ``wise`` configuration. Consistent with the scope of the OAT analysis, the review was limited to the Mixed Low-Level Waste (MLLW) fraction of DOE`s mixed waste inventory. The Los Alamos team prepared workshop materials (databases and compilations) to be used as bases for participant review and recommendations. These materials derived from the Mixed Waste Inventory Report (MWIR) data base (May 1994), the Draft Site Treatment Plan (DSTP) data base, and the OAT treatment facility configuration of December 7, 1994. In reviewing workshop results, the reader should note several caveats regarding data limitations. Link-up of the MWIR and DSTP data bases, while representing the most comprehensive array of mixed waste information available at the time of the workshop, requires additional data to completely characterize all waste streams. A number of changes in waste identification (new and redefined streams) occurred during the interval from compilation of the data base to compilation of the DSTP data base with the end result that precise identification of radiological and contaminant characteristics was not possible for these streams. To a degree, these shortcomings compromise the workshop results; however, the preponderance of waste data was linked adequately, and therefore, these analyses should provide useful insight into potential applications of alternative technologies to DOE MLLW treatment facilities.

  7. Intermediate-energy nuclear chemistry workshop

    SciTech Connect (OSTI)

    Butler, G.W.; Giesler, G.C.; Liu, L.C.; Dropesky, B.J.; Knight, J.D.; Lucero, F.; Orth, C.J.

    1981-05-01T23:59:59.000Z

    This report contains the proceedings of the LAMPF Intermediate-Energy Nuclear Chemistry Workshop held in Los Alamos, New Mexico, June 23-27, 1980. The first two days of the Workshop were devoted to invited review talks highlighting current experimental and theoretical research activities in intermediate-energy nuclear chemistry and physics. Working panels representing major topic areas carried out indepth appraisals of present research and formulated recommendations for future research directions. The major topic areas were Pion-Nucleus Reactions, Nucleon-Nucleus Reactions and Nuclei Far from Stability, Mesonic Atoms, Exotic Interactions, New Theoretical Approaches, and New Experimental Techniques and New Nuclear Chemistry Facilities.

  8. Waste-to-Energy Workshop Agenda

    Broader source: Energy.gov [DOE]

    The Bioenergy Technologies Office (BETO) at the Department of Energy aims to identify and address key technical barriers to the commercial deployment of liquid transportation fuels from waste feedstocks. As a part of this effort, BETO is organizing a Waste-to-Energy Roadmapping workshop. Workshop participants will join facilitated breakout sessions to discuss anaerobic digestion, hydrothermal liquefaction, and other processes that make productive use of wastewater residuals, biosolids, foodstuffs, and organic municipal solid waste. These discussions will be synthesized and used in developing a waste-to-energy technology roadmap.

  9. Hunton Group core workshop and field trip

    SciTech Connect (OSTI)

    Johnson, K.S. [ed.

    1993-12-31T23:59:59.000Z

    The Late Ordovician-Silurian-Devonian Hunton Group is a moderately thick sequence of shallow-marine carbonates deposited on the south edge of the North American craton. This rock unit is a major target for petroleum exploration and reservoir development in the southern Midcontinent. The workshop described here was held to display cores, outcrop samples, and other reservoir-characterization studies of the Hunton Group and equivalent strata throughout the region. A field trip was organized to complement the workshop by allowing examination of excellent outcrops of the Hunton Group of the Arbuckle Mountains.

  10. Proceedings: commercial refrigeration research workshop. Summary

    SciTech Connect (OSTI)

    Blatt, M.H.

    1984-10-01T23:59:59.000Z

    The purpose of this workshop was to identify the state-of-the-art and determine research needs for improving energy use and demand in commercial refrigeration applications. Workshop attendees included research and development, technical operations and marketing people from manufacturers of supermarket refrigeration, space conditioning, and energy management systems equipment, and from supermarket chains and electric utilities. Presentations were given on best current practice and research needs from the perspective of each of these industry segments. Working groups identified ten important research, development and equipment demonstration projects to improve the efficiency of refrigerating equipment, heating, ventilating and air-conditioning (HVAC) equipment, and other energy-using systems in supermarkets.

  11. Workshop on Scientific Applications of the LCLS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun1 TableContacts WorkshopTrading andWorkshop

  12. BEAMS3D Neutral Beam Injection Model

    SciTech Connect (OSTI)

    Lazerson, Samuel

    2014-04-14T23:59:59.000Z

    With the advent of applied 3D fi elds in Tokamaks and modern high performance stellarators, a need has arisen to address non-axisymmetric effects on neutral beam heating and fueling. We report on the development of a fully 3D neutral beam injection (NBI) model, BEAMS3D, which addresses this need by coupling 3D equilibria to a guiding center code capable of modeling neutral and charged particle trajectories across the separatrix and into the plasma core. Ionization, neutralization, charge-exchange, viscous velocity reduction, and pitch angle scattering are modeled with the ADAS atomic physics database [1]. Benchmark calculations are presented to validate the collisionless particle orbits, neutral beam injection model, frictional drag, and pitch angle scattering effects. A calculation of neutral beam heating in the NCSX device is performed, highlighting the capability of the code to handle 3D magnetic fields.

  13. A TALE OF TWO BEAMS: GAUSSIAN BEAMS AND BESSEL BEAMS ROBERT L. NOWACK

    E-Print Network [OSTI]

    Nowack, Robert L.

    A TALE OF TWO BEAMS: GAUSSIAN BEAMS AND BESSEL BEAMS ROBERT L. NOWACK Abstract. An overview is given of two types of focused beams, Gaussian beams and Bessel beams. First I describe some of the basic properties of Gaussian beams in homogeneous media which stay collimated over a certain distance range after

  14. Project X Energy Station Workshop Report. Report by the Organizers and Co-Conveners of the Project X Energy Station Workshop

    SciTech Connect (OSTI)

    Asner, David M.; Hurh, Patrick; Brady Raap, Michaele C.; Gohar, Yoursy; Peterson, Mary E.; Pithcer, Eric; Riemer, Bernie; Senor, David J.; Wootan, David W.

    2013-06-14T23:59:59.000Z

    Project X Energy Station Workshop Report Report by the Organizers and Co-Conveners of the Project X Energy Station Workshop

  15. Sixth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Kruger, P. (eds.)

    1980-12-18T23:59:59.000Z

    INTRODUCTION TO THE PROCEEDINGS OF THE SIXTH GEOTHERMAL RESERVOIR ENGINEERING WORKSHOP, STANFORD GEOTHERMAL PROGRAM Henry J. Ramey, Jr., and Paul Kruger Co-Principal Investigators Ian G. Donaldson Program Manager Stanford Geothermal Program The Sixth Workshop on Geothermal Reservoir Engineering convened at Stanford University on December 16, 1980. As with previous Workshops the attendance was around 100 with a significant participation from countries other than the United States (18 attendees from 6 countries). In addition, there were a number of papers from foreign contributors not able to attend. Because of the success of all the earlier workshops there was only one format change, a new scheduling of Tuesday to Thursday rather than the earlier Wednesday through Friday. This change was in general considered for the better and will be retained for the Seventh Workshop. Papers were presented on two and a half of the three days, the panel session, this year on the numerical modeling intercomparison study sponsored by the Department of Energy, being held on the second afternoon. This panel discussion is described in a separate Stanford Geothermal Program Report (SGP-TR42). This year there was a shift in subject of the papers. There was a reduction in the number of papers offered on pressure transients and well testing and an introduction of several new subjects. After overviews by Bob Gray of the Department of Energy and Jack Howard of Lawrence Berkeley Laboratory, we had papers on field development, geopressured systems, production engineering, well testing, modeling, reservoir physics, reservoir chemistry, and risk analysis. A total of 51 papers were contributed and are printed in these Proceedings. It was, however, necessary to restrict the presentations and not all papers printed were presented. Although the content of the Workshop has changed over the years, the format to date has proved to be satisfactory. The objectives of the Workshop, the bringing together of researchers, engineers and managers involved in geothermal reservoir study and development and the provision of a forum for the prompt and open reporting of progress and for the exchange of ideas, continue to be met . Active discussion by the majority of the participants is apparent both in and outside the workshop arena. The Workshop Proceedings now contain some of the most highly cited geothermal literature. Unfortunately, the popularity of the Workshop for the presentation and exchange of ideas does have some less welcome side effects. The major one is the developing necessity for a limitation of the number of papers that are actually presented. We will continue to include all offered papers in the Summaries and Proceedings. As in the recent past, this sixth Workshop was supported by a grant from the Department of Energy. This grant is now made directly to Stanford as part of the support for the Stanford Geothermal Program (Contract No. DE-AT03-80SF11459). We are certain that all participants join us in our appreciation of this continuing support. Thanks are also due to all those individuals who helped in so many ways: The members of the program committee who had to work so hard to keep the program to a manageable size - George Frye (Aminoil USA), Paul G. Atkinson (Union Oil Company). Michael L. Sorey (U.S.G.S.), Frank G. Miller (Stanford Geothermal Program), and Roland N. Horne (Stanford Geothermal Program). The session chairmen who contributed so much to the organization and operation of the technical sessions - George Frye (Aminoil USA), Phillip H. Messer (Union Oil Company), Leland L. Mink (Department of Energy), Manuel Nathenson (U.S.G.S.), Gunnar Bodvarsson (Oregon State University), Mohindar S. Gulati (Union Oil Company), George F. Pinder (Princeton University), Paul A. Witherspoon (Lawrence Berkeley Laboratory), Frank G. Miller (Stanford Geothermal Program) and Michael J. O'Sullivan (Lawrence Berkeley Laboratory). The many people who assisted behind the scenes, making sure that everything was prepared and organized - in particular we would like to t

  16. 13th Workshop on Crystalline Silicon Solar Cell Materials and Processes: Extended Abstracts and Papers

    SciTech Connect (OSTI)

    Sopori, B. L.; Rand, J.; Saitoh, T.; Sinton, R.; Stavola, M.; Swanson, D.; Tan, T.; Weber, E.; Werner, J.; Al-Jassim, M.

    2003-08-01T23:59:59.000Z

    The 13th Workshop will provide a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. It will offer an excellent opportunity for researchers in private industry and at universities to prioritize mutual needs for future collaborative research. The workshop is intended to address the fundamental aspects of impurities and defects in silicon: their properties, the dynamics during device processing, and their application for developing low-cost processes for manufacturing high-efficiency silicon solar cells. A combination of oral, poster, and discussion sessions will review recent advances in crystal growth, new cell structures, new processes and process characterization techniques, and cell fabrication approaches suitable for future manufacturing demands.

  17. Workshop on Accelerators for Heavy Ion Fusion: Summary Report of the Workshop

    SciTech Connect (OSTI)

    Seidl, P.A.; Barnard, J.J.

    2011-04-29T23:59:59.000Z

    The Workshop on Accelerators for Heavy Ion Fusion was held at Lawrence Berkeley National Laboratory May 23-26, 2011. The workshop began with plenary sessions to review the state of the art in HIF (heavy ion fusion), followed by parallel working groups, and concluded with a plenary session to review the results. There were five working groups: IFE (inertial fusion energy) targets, RF approach to HIF, induction accelerator approach to HIF, chamber and driver interface, ion sources and injectors.

  18. Energy Systems Integration Facility (ESIF) External Stakeholders Workshop: Workshop Proceedings, 9 October 2008, Golden, Colorado

    SciTech Connect (OSTI)

    Komomua, C.; Kroposki, B.; Mooney, D.; Stoffel, T.; Parsons, B.; Hammond, S.; Kutscher, C.; Remick, R.; Sverdrup, G.; Hawsey, R.; Pacheco, M.

    2009-01-01T23:59:59.000Z

    On October 9, 2008, NREL hosted a workshop to provide an opportunity for external stakeholders to offer insights and recommendations on the design and functionality of DOE's planned Energy Systems Infrastructure Facility (ESIF). The goal was to ensure that the planning for the ESIF effectively addresses the most critical barriers to large-scale energy efficiency (EE) and renewable energy (RE) deployment. This technical report documents the ESIF workshop proceedings.

  19. ATA beam director experiment

    SciTech Connect (OSTI)

    Lee, E.P.; Younger, F.C.; Cruz, G.E.; Nolting, E.

    1986-06-23T23:59:59.000Z

    This report describes beam director elements for an experiment at the Advanced Test Accelerator. The elements described include a vernier magnet for beam aiming, an achromat magnet, and an isolation system for the beam interface. These components are built at small scale for concept testing. (JDH)

  20. 7th International Workshop on Microbeam Probes of Cellular Radiation Response

    SciTech Connect (OSTI)

    Brenner, David J.

    2009-07-21T23:59:59.000Z

    The extended abstracts that follow present a summary of the Proceedings of the 7th International Workshop: Microbeam Probes of Cellular Radiation Response, held at Columbia University’s Kellogg Center in New York City on March 15–17, 2006. These International Workshops on Microbeam Probes of Cellular Radiation Response have been held regularly since 1993 (1–5). Since the first workshop, there has been a rapid growth (see Fig. 1) in the number of centers developing microbeams for radiobiological research, and worldwide there are currently about 30 microbeams in operation or under development. Single-cell/single-particle microbeam systems can deliver beams of different ionizing radiations with a spatial resolution of a few micrometers down to a few tenths of a micrometer. Microbeams can be used to addressquestions relating to the effects of low doses of radiation (a single radiation track traversing a cell or group of cells), to probe subcellular targets (e.g. nucleus or cytoplasm), and to address questions regarding the propagation of information about DNA damage (for example, the radiation-induced bystander effect). Much of the recent research using microbeams has been to study low-dose effects and ‘‘non-targeted’’ responses such as bystander effects, genomic instability and adaptive responses. This Workshop provided a forum to assess the current state of microbeam technology and current biological applications and to discuss future directions for development, both technological and biological. Over 100 participants reviewed the current state of microbeam research worldwide and reported on new technological developments in the fields of both physics and biology.

  1. PROCEEDINGS OF RIKEN BNL RESEARCH CENTER WORKSHOP, HADRON STRUCTURE FROM LATTICE QCD, MARCH 18 - 22, 2002, BROOKHAVEN NATIONAL LABORATORY.

    SciTech Connect (OSTI)

    BLUM, T.; BOER, D.; CREUTZ, M.; OHTA, S.; ORGINOS, K.

    2002-03-18T23:59:59.000Z

    The RIKEN BNL Research Center workshop on ''Hadron Structure from Lattice QCD'' was held at BNL during March 11-15, 2002. Hadron structure has been the subject of many theoretical and experimental investigations, with significant success in understanding the building blocks of matter. The nonperturbative nature of QCD, however, has always been an obstacle to deepening our understanding of hadronic physics. Lattice QCD provides the tool to overcome these difficulties and hence a link can be established between the fundamental theory of QCD and hadron phenomenology. Due to the steady progress in improving lattice calculations over the years, comparison with experimentally measured hadronic quantities has become important. In this respect the workshop was especially timely. By providing an opportunity for experts from the lattice and hadron structure communities to present their latest results, the workshop enhanced the exchange of knowledge and ideas. With a total of 32 registered participants and 26 talks, the interest of a growing community is clearly exemplified. At the workshop Schierholz and Negele presented the current status of lattice computations of hadron structure. Substantial progress has been made during recent years now that the quenched results are well under control and the first dynamical results have appeared. In both the dynamical and the quenched simulations the lattice results, extrapolated to lighter quark masses, seem to disagree with experiment. Melnitchouk presented a possible explanation (chiral logs) for this disagreement. It became clear from these discussions that lattice computations at significantly lighter quark masses need to be performed.

  2. Montenegro Greenhouse Ornamental Production Workshop October 2007

    E-Print Network [OSTI]

    Lieth, J. Heinrich

    Montenegro Greenhouse Ornamental Production Workshop October 2007 Heiner Lieth Plant Sciences of Montenegro is promotion of the their greenhouse flower production industry. At the time when the program was planned it was unknown what level of interest and expertise would be available on-site in Montenegro. Thus

  3. MINI-WORKSHOP ANNOUNCEMENT Department of Statistics

    E-Print Network [OSTI]

    Stephens, Matthew

    MINI-WORKSHOP ANNOUNCEMENT Department of Statistics Space-time Modeling of Air Pollution Levels and deposition values of various air pollutants. We propose a space-time modeling approach for combining CMAQ output with observations to produce an improved map of air pollution levels. Methodologies to evaluate

  4. Fifth national stakeholder workshop summary report

    SciTech Connect (OSTI)

    NONE

    1997-12-31T23:59:59.000Z

    On April 9--11, 1997, the Department of Energy`s Office of Worker and Community Transition convened its fifth National Stakeholder Workshop. The workshop addressed a wide range of work force restructuring and community transition issues critical to the future success of the Department. Two important elements of the meeting were: (1) reviewing progress made on the challenges identified during the March 1996f stakeholder`s meeting in Atlanta, Georgia; and (2) identifying areas that needed priority attention during the early months of the second Clinton Administration. The format of the Workshop included several plenary sessions and a number of small group discussion sessions. The small group sessions focused on topics related to labor issues, work force restructuring, work force planning, community transition, and employee concerns. The sessions provided a wide range of views on worker and community transition issues. The workshop included presentations on the following topics: Welcome and introductions; Opening remarks; Community reuse organizations: recent accomplishments; Privatization: policy, practice and potential pitfalls; Department of Energy`s integrated training initiatives; Congressional perspective on work force restructuring; and, Privatization and the Ten Year Plan.

  5. Scottish Air Pollution and Health Workshop

    E-Print Network [OSTI]

    Scottish Air Pollution and Health Workshop Session 4 Joint Research Policy Needs and Interactions needs and how can we work together effectively on these to reduce the adverse effects of air pollution together effectively on these to reduce the adverse effects of air pollution in Scotland. Modelling

  6. Report on the Workshop on Distributed AI

    E-Print Network [OSTI]

    Davis, Randall

    On June 9-11, 22 people gathered at Endicott House for the first workshop on the newly emerging topic of Distributed AI. They came with a wide range of views on the topic, and indeed a wide range of views of what precisely ...

  7. Biosecurity for Aquaculture Rend Lake Workshop

    E-Print Network [OSTI]

    's The Right Thing To Do Makes You More Profitable Protects Your Investment Regulatory Rend Lake Biosecurity Protect economic investmentProtect economic investment Reputation Protect against new diseases Viral regulations Rend Lake Biosecurity Workshop #12;Regulatory International Federal StateState Local Rend Lake

  8. Workshop on Energy Law 12 September 2014

    E-Print Network [OSTI]

    Johansen, Tom Henning

    Workshop on Energy Law 12 September 2014 Venue: Institut für Energie und Regulierungsrecht Berlin, EUREF-Campus am Gasometer, Haus 13, Torgauer Str. 12-15, 10829 Berlin 10:00 The impact of the new guidelines on state aid for environmental protection and energy on the promotion of renewable energies

  9. Ninth International Workshop on Plant Membrane Biology

    SciTech Connect (OSTI)

    Not Available

    1993-12-31T23:59:59.000Z

    This report is a compilation of abstracts from papers which were discussed at a workshop on plant membrane biology. Topics include: plasma membrane ATP-ases; plant-environment interactions, membrane receptors; signal transduction; ion channel physiology; biophysics and molecular biology; vaculor H+ pumps; sugar carriers; membrane transport; and cellular structure and function.

  10. Workshop overview: Arsenic research and risk assessment

    SciTech Connect (OSTI)

    Sams, Reeder [Integrated Risk Information System Program, National Center for Environmental Assessment, MC: B-243 01, Office of Research and Development, United States Environmental Protection Agency, Research Triangle Park, NC 27711 (United States)], E-mail: sams.reeder@epa.gov; Wolf, Douglas C. [Environmental Carcinogenesis Division, National Health and Environmental Effects Research Laboratory, Office of Research and Development, United States Environmental Protection Agency, Research Triangle Park, NC 27711 (United States); Ramasamy, Santhini; Ohanian, Ed [Health and Ecological Criteria Division, Office of Science and Technology, Office of Water, United States Environmental Protection Agency, Washington, DC 20460 (United States); Chen, Jonathan [Antimicrobials Division, Office of Pesticide Programs, United States Environmental Protection Agency, Washington, DC 20460 (United States); Lowit, Anna [Health Effects Division, Office of Pesticide Programs, United States Environmental Protection Agency, Washington, DC 20460 (United States)

    2007-08-01T23:59:59.000Z

    The chronic exposure of humans through consumption of high levels of inorganic arsenic (iAs)-contaminated drinking water is associated with skin lesions, peripheral vascular disease, hypertension, and cancers. Additionally, humans are exposed to organic arsenicals when used as pesticides and herbicides (e.g., monomethylarsonic acid, dimethylarsinic acid (DMA{sup V}) also known as cacodylic acid). Extensive research has been conducted to characterize the adverse health effects that result from exposure to iAs and its metabolites to describe the biological pathway(s) that lead to adverse health effects. To further this effort, on May 31, 2006, the United States Environmental Protection Agency (USEPA) sponsored a meeting entitled 'Workshop on Arsenic Research and Risk Assessment'. The invited participants from government agencies, academia, independent research organizations and consultants were asked to present their current research. The overall focus of these research efforts has been to determine the potential human health risks due to environmental exposures to arsenicals. Pursuant in these efforts is the elucidation of a mode of action for arsenicals. This paper provides a brief overview of the workshop goals, regulatory context for arsenical research, mode of action (MOA) analysis in human health risk assessment, and the application of MOA analysis for iAs and DMA{sup V}. Subsequent papers within this issue will present the research discussed at the workshop, ensuing discussions, and conclusions of the workshop.

  11. Workshop on Distributed Cloud Computing Dresden, Germany

    E-Print Network [OSTI]

    Schmid, Stefan

    DCC 2013 Workshop on Distributed Cloud Computing Dresden, Germany December 9-12, 2013 (Submission Pan Hui, HKUST, Hong Kong Wolfgang Kellerer, TU Munich, Germany Ruben Montero, Uni Complutense de Waterloo, Canada Marco Canini, T-Labs & TU Berlin, Germany Paolo Costa, MSR & Imperial College, UK Xiaoming

  12. Tenth workshop on geothermal reservoir engineering: proceedings

    SciTech Connect (OSTI)

    Not Available

    1985-01-22T23:59:59.000Z

    The workshop contains presentations in the following areas: (1) reservoir engineering research; (2) field development; (3) vapor-dominated systems; (4) the Geysers thermal area; (5) well test analysis; (6) production engineering; (7) reservoir evaluation; (8) geochemistry and injection; (9) numerical simulation; and (10) reservoir physics. (ACR)

  13. Workshop on Commercial Application of IR Spectroscopies

    E-Print Network [OSTI]

    Hickman, Mark

    and their companies/organisations for their support of this workshop. Their time in preparing material., The Radiata Pine Breeding Company, The University of Auckland and Weyerhaeuser (USA) Inc. The cover image in Eucalyptus globulus 37-48 Satoru Tsuchikawa and Hikaru Kobori Using NIR for Grading Timber 49-54 Nicholas

  14. Russian: United States Environmental Restoration Workshop

    SciTech Connect (OSTI)

    Not Available

    1993-08-01T23:59:59.000Z

    The Russian - United States Environmental Restoration Workshop, held in Washington, D.C., and Richland, Washington, from April 5 through 18, 1993, was the first extended collaborative information exchange between the US Department of Energy (DOE) and Russian scientists at the site level. In addition to the Russian scientists, workshop participants included scientists and staff from DOE, Pacific Northwest Laboratory (PNL), Westinghouse Hanford Company (WHC), the US Environmental Training Institute (USETI), universities, and the private sector. The first week (April 5 through 10) of the workshop took place in Washington, D.C., where the Russian and US participants were presented with a US perspective on environmental restoration and remediation issues from representatives in DOE and the US Environmental Protection Agency (EPA). The second week (April 11 through 18) occurred in Richland, Washington, where the participants were presented with site-specific environmental restoration and remediation issues related to Hanford Site cleanup. This report is a compilation of the presentations, discussions, and experiences shared during the second week of the workshop in Richland, Washington.

  15. Hydrogen Compatible Materials Workshop November 3rd

    E-Print Network [OSTI]

    ) must mitigate the impacts of hydrogen embrittlement while reducing capital costs with the use of newHydrogen Compatible Materials Workshop November 3rd , 2010 Research, Engineering, and Applications Center for Hydrogen Sandia National Laboratory, Livermore, CA Introduction: On November 3rd , 2010

  16. DOE Vehicular Tank Workshop Sandia National Laboratories

    E-Print Network [OSTI]

    DOE Vehicular Tank Workshop Sandia National Laboratories Livermore, CA Nondestructive Evaluation for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications ­ E2581-07 Std Practice for Shearography of Polymer Matrix Composites, Sandwich Core Materials

  17. Rare Plant Conservation Planning Workshop Results

    E-Print Network [OSTI]

    ­ one of the most imperiled species in Colorado. The species is at risk of extinction due to its narrowRare Plant Conservation Planning Workshop Results PAGOSA SPRINGS Plant Species of Focus Pagosa............................................................................................................................. 12 Attachment 1. Additional key species and plant communities in the Pagosa Springs area 13

  18. Hydrogen quantitative risk assessment workshop proceedings.

    SciTech Connect (OSTI)

    Groth, Katrina M.; Harris, Aaron P.

    2013-09-01T23:59:59.000Z

    The Quantitative Risk Assessment (QRA) Toolkit Introduction Workshop was held at Energetics on June 11-12. The workshop was co-hosted by Sandia National Laboratories (Sandia) and HySafe, the International Association for Hydrogen Safety. The objective of the workshop was twofold: (1) Present a hydrogen-specific methodology and toolkit (currently under development) for conducting QRA to support the development of codes and standards and safety assessments of hydrogen-fueled vehicles and fueling stations, and (2) Obtain feedback on the needs of early-stage users (hydrogen as well as potential leveraging for Compressed Natural Gas [CNG], and Liquefied Natural Gas [LNG]) and set priorities for %E2%80%9CVersion 1%E2%80%9D of the toolkit in the context of the commercial evolution of hydrogen fuel cell electric vehicles (FCEV). The workshop consisted of an introduction and three technical sessions: Risk Informed Development and Approach; CNG/LNG Applications; and Introduction of a Hydrogen Specific QRA Toolkit.

  19. GI-MITTEILUNG Workshop Elektrotechnik CAD

    E-Print Network [OSTI]

    anstaltet wurde der Work shop vom Institut flir In formatik der UniversWit Stuttgart (Lehrstuhl Graphi sche Modellieren" [3] der Gesellschaft flir Informa tik e. V. (GI). Der Workshop richtete sich gleicherma der Veransta)tung war es, den aktuellen Stand der CADI CAE-Technologie flir die Be reiche

  20. DOE Hydrogen Pipeline Working Group Workshop

    E-Print Network [OSTI]

    DOE Hydrogen Pipeline Working Group Workshop August 31, 2005 Augusta, Georgia #12;Hydrogen Pipeline Experience Presented By: LeRoy H. Remp Lead Project Manager Pipeline Projects #12;ppt00 3 Hydrogen Pipeline Pipeline Photos #12;ppt00 8 Pipeline Photos #12;ppt00 9 Overview of North American Air Products Hydrogen P

  1. Digital video camera workshop Sony VX2000

    E-Print Network [OSTI]

    Digital video camera workshop Sony VX2000 Sony DSR-PDX10 #12;Borrowing Eligibility · Currently are excellent for all types of video work · Both use MiniDV format (60min SP/90min LP) #12;Camcorder Kits ­ Firewire #12;Video Camera Operation Installing the Battery Sony VX2000 Insert the battery with the arrow

  2. DOE Sustainability Awards Best Practices Virtual Workshop

    Broader source: Energy.gov [DOE]

    The Sustainability Performance Office (SPO) will host a virtual best practices workshop on April 23, 2014 (2:00-3:30 PM EDT) to recognize the winners of the 2013 DOE Sustainability Awards. Award winners will present on their accomplishments and answer brief questions on their programs and projects. Please join us in celebrating the 2013 DOE Sustainability Awards winners.

  3. Facebook i18n Workshop Kevin Scannell

    E-Print Network [OSTI]

    Scannell, Kevin Patrick

    Facebook i18n Workshop Kevin Scannell Saint Louis University 21 May 2013 #12;Trendsetting l10n of these are among the most widely localized Google search: 152 locales, 143 languages Facebook: 105 locales, 94 languages Firefox: 94 locales, 87 languages Microsoft: 106 (LIPs) #12;Facebook l10n Crowdsourced

  4. Proceedings: 2001 Nuclear Asset Management Workshop

    SciTech Connect (OSTI)

    None

    2002-05-01T23:59:59.000Z

    The fourth annual EPRI Nuclear Asset Management Workshop helped decision makers at all levels of nuclear enterprises to keep informed about developing nuclear asset management (NAM) processes, methods, and tools. The goal is to operate nuclear plants with enhanced profitability, while maintaining safety.

  5. Proceedings: 2002 Workshop on Condensate Polishing

    SciTech Connect (OSTI)

    None

    2002-06-01T23:59:59.000Z

    Condensate polishing aims to control impurities in a nuclear power plant, thus allowing the unit to operate more reliably. This report contains the work presented at EPRI's 2002 Workshop on Condensate Polishing, where 36 papers were presented on current issues, research, and utility experiences involving polishing issues at both pressurized water reactor (PWR) and boiling water reactor (BWR) units.

  6. Reversible Fuel Cells Workshop Summary Report

    E-Print Network [OSTI]

    renewable electricity, but they could not compete with pumped hydro or compressed air energy storage (CAESReversible Fuel Cells Workshop Summary Report Prepared for: U.S. Department of Energy Prepared by: Dr. Robert J. Remick National Renewable Energy Laboratory Mr. Douglas Wheeler DJW Technology YOU

  7. THEORY WORKSHOP FOR PRE-COLLEGE STUDENTS

    E-Print Network [OSTI]

    in Zones W,X,Z & Q lots. Other zones (including A) are by permit only, at $6 per day. Please contact Parking Services at 491-7041 to arrange a permit. THEORY WORKSHOP SCHEDULE MONDAY, June 13 8:30 a

  8. Joint Fuel Cell Bus Workshop Summary Report

    E-Print Network [OSTI]

    Joint Fuel Cell Bus Workshop Summary Report Prepared for: U.S. Department of Energy (DOE/EERE) U was jointly sponsored by the Energy Efficiency and Renewable Energy office of the DOE and the Federal Transit the entire range of operating conditions and cycles · Cost (manufacturing, capital, operations

  9. 3D Imaging Technology Conference & Applications Workshop

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    2nd London 3D Imaging Technology Conference & Applications Workshop 3D scanning and vertical, Greece, bilalis@dpem.tuc.gr Abstract. The new 3D scanning technology had changed the way and opened new from some 3D scanning approaches, which were applied for the first time in the southern part of Europe

  10. Automotive EMC Workshop Clemson Vehicular Electronics Laboratory

    E-Print Network [OSTI]

    Duchowski, Andrew T.

    Automotive EMC Workshop Clemson Vehicular Electronics Laboratory Reliable Automotive Electronics Design for Guaranteed EMC Compliance April 29, 2013 Todd Hubing Clemson University #12;EMC Requirements they reviewed/designed would meet all automotive EMC requirements the first time they were tested. #12;Clemson

  11. International Workshop Responses of Vegetation and Human

    E-Print Network [OSTI]

    Bern, Universität

    of southern Russia and climatic changes" 15.00 ­ Dr. A. Skorobogatov (Voronezh University, Russia). "TheInternational Workshop Responses of Vegetation and Human Society to Climatic Changes in Ukraine- Ukrainian team started to investigate Holocene climate changes and the resulting vegetation and human

  12. Twentieth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    None

    1995-01-26T23:59:59.000Z

    PREFACE The Twentieth Workshop on Geothermal Reservoir Engineering, dedicated to the memory of Professor Hank Ramey, was held at Stanford University on January 24-26, 1995. There were ninety-five registered participants. Participants came from six foreign countries: Japan, Mexico, England, Italy, New Zealand and Iceland. The performance of many geothermal reservoirs outside the United States was described in several of the papers. Professor Roland N. Horne opened the meeting and welcomed visitors to the campus. The key note speaker was Marshall Reed, who gave a brief overview of the Department of Energy's current plan. Thirty-two papers were presented in the technical sessions of the workshop. Technical papers were organized into eleven sessions concerning: field development, modeling, well tesubore, injection, geoscience, geochemistry and field operations. Session chairmen were major contributors to the workshop, and we thank: Ben Barker, Bob Fournier, Mark Walters, John Counsil, Marcelo Lippmann, Keshav Goyal, Joel Renner and Mike Shook. In addition to the technical sessions, a panel discussion was held on ''What have we learned in 20 years?'' Panel speakers included Patrick Muffler, George Frye, Alfred Truesdell and John Pritchett. The subject was further discussed by Subir Sanyal, who gave the post-dinner speech at the banquet. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank our students who operated the audiovisual equipment. Shaun D. Fitzgerald Program Manager

  13. DOE Hydrogen Transition Analysis Workshop Discussion Comments...

    Broader source: Energy.gov (indexed) [DOE]

    DOE Hydrogen Transition Analysis Workshop U.S. Department of Energy - Washington, DC January 26, 2006 D DI IS SC CU US SS SI IO ON N C CO OM MM ME EN NT TS S, , Q QU UE ES ST TI IO...

  14. Workshop on indoor air quality research needs

    SciTech Connect (OSTI)

    Not Available

    1980-01-01T23:59:59.000Z

    Workshop participants report on indoor air quality research needs including the monitoring of indoor air quality, report of the instrumentation subgroup of indoor air quality, health effects, and the report of the control technology session. Risk analysis studies addressing indoor environments were also summarized. (DLS)

  15. ARTISAN/FARMSTEAD CHEESEMAKER FOOD SAFETY WORKSHOP

    E-Print Network [OSTI]

    Alpay, S. Pamir

    cheesemakers understand best practices and techniques for pathogen control in their facilities to assure. The workshop will include topics such as GMPs, sanitation, preventative and microbial controls, environmental looking to protect consumers and their businesses through good food safety practices · Extension

  16. Neutral beam monitoring

    DOE Patents [OSTI]

    Fink, Joel H. (Livermore, CA)

    1981-08-18T23:59:59.000Z

    Method and apparatus for monitoring characteristics of a high energy neutral beam. A neutral beam is generated by passing accelerated ions through a walled cell containing a low energy neutral gas, such that charge exchange neutralizes the high energy ion beam. The neutral beam is monitored by detecting the current flowing through the cell wall produced by low energy ions which drift to the wall after the charge exchange. By segmenting the wall into radial and longitudinal segments various beam conditions are further identified.

  17. Particle beam dynamics | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratorySpeedingOptimizingToolsto controlParcParticipate

  18. Princeton Plasma Physics Lab - Particle beam dynamics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FOR Primary Author Lastenergy Energy

  19. Seventeenth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

    1992-01-31T23:59:59.000Z

    PREFACE The Seventeenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 29-31, 1992. There were one hundred sixteen registered participants which equaled the attendance last year. Participants were from seven foreign countries: Italy, Japan, United Kingdom, France, Belgium, Mexico and New Zealand. Performance of many geothermal fields outside the United States was described in the papers. The Workshop Banquet Speaker was Dr. Raffaele Cataldi. Dr. Cataldi gave a talk on the highlights of his geothermal career. The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy was awarded to Dr. Cataldi. Dr. Frank Miller presented the award at the banquet. Thirty-eight papers were presented at the Workshop with two papers submitted for publication only. Dr. Roland Horne opened the meeting and the key note speaker was J.E. ''Ted'' Mock who discussed the DOE Geothermal R. & D. Program. The talk focused on aiding long-term, cost effective private resource development. Technical papers were organized in twelve sessions concerning: geochemistry, hot dry rock, injection, geysers, modeling, and reservoir mechanics. Session chairmen were major contributors to the program and we thank: Sabodh Garg., Jim Lovekin, Jim Combs, Ben Barker, Marcel Lippmann, Glenn Horton, Steve Enedy, and John Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual equipment and to Francois Groff who coordinated the meeting arrangements for the Workshop. Henry J. Ramey, Jr. Roland N. Horne Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook -vii

  20. 1996 DOE technical standards program workshop: Proceedings

    SciTech Connect (OSTI)

    NONE

    1996-07-01T23:59:59.000Z

    The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOE representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.

  1. 1994 DOE Technical Standards Program Workshop: Proceedings

    SciTech Connect (OSTI)

    Spellman, D.J.

    1994-12-31T23:59:59.000Z

    The DOE Technical Standards Program has been structured to provide guidance and assistance for the development, adoption, and use of voluntary standards within the Department. OMB Circular A-119, ``Federal Participation in the Development and Use of Voluntary Standards`` establishes the policy to be followed in working with voluntary standards bodies, and in adopting and using voluntary standards whenever feasible. The DOE Technical Standards Program is consistent with this policy and is dedicated to the task of promoting its implementation. The theme of this year`s workshop is ``Standards Initiatives in Environmental Management fostering the development and use of industry standards for safe, environmentally responsible operations.`` The objective of the workshop is to increase the participant`s awareness of the standardization activities taking place nationally and internationally and the impact of these activities on their efforts, and to facilitate the exchange of experiences, processes, and tools for implementing the program. Workshop sessions will include presentations by industry and Government notables in the environment, safety, and health arena with ample opportunity for everyone to ask questions and share experiences. There will be a breakout session which will concentrate on resolution of issues arising from the implementation of the DOE Technical Standards Program and a plenary session to discuss the plans developed by the breakout groups. Many organizations provide services and products which support the development, processing, distribution, and retrieval of standards. Those organizations listed at the end of the agenda will have exhibits available for your perusal throughout the workshop. Last year`s workshop was very successful in stimulating an understanding of an interest in the standards program. This year, we hope to build on that success and provide an environment for the synergism of ideas to enhance the program and advance its implementation.

  2. Proc. 19th Winter Workshop on Nuclear Dynamics (2003) 000000

    E-Print Network [OSTI]

    Bertulani, Carlos A. - Department of Physics and Astronomy, Texas A&M University

    Abstract. I discuss a few of the recent developments in nuclear reactions at very low energies ends of the energy scale for nuclear reactions: (a) the very high and (b) the very low relative. At the other end of the energy scale are the low energy reactions of importance for stellar evolution. A chain

  3. Beam diagnostics, collimation, injection/extraction, targetry, accidents and commissioning: Working group C&G summary report

    SciTech Connect (OSTI)

    Mokhov, N.V.; /Fermilab; Hasegawa, K.; /JAEA, Ibaraki; Henderson, S.; /Oak Ridge; Schmidt, R.; /CERN; Tomizawa, M.; /KEK, Tsukuba; Wittenburg, K.; /DESY

    2006-11-01T23:59:59.000Z

    The performance of accelerators with high beam power or high stored beam energy is strongly dependent on the way the beam is handled, how beam parameters are measured and how the machine is commissioned. Two corresponding working groups have been organized for the Workshop: group C ''Beam diagnostics, collimation, injection/extraction and targetry'' and group G ''Commissioning strategies and procedures''. It has been realized that the issues to be discussed in these groups are interlaced with the participants involved and interested in the above topics, with an extremely important subject of beam-induced accidents as additional topic. Therefore, we have decided to combine the group sessions as well as this summary report. Status, performance and outstanding issues of each the topic are described in the sections below, with additional observations and proposals by the joint group at the end.

  4. Scheme for Low Energy Beam Transport with a non-neutralized section

    E-Print Network [OSTI]

    Shemyakin, A

    2015-01-01T23:59:59.000Z

    A typical Low Energy Beam Transport (LEBT) design relies on dynamics with nearly complete beam space charge neutralization over the entire length of the LEBT. This paper argues that, for a beam with modest perveance and uniform current density distribution when generated at the source, a downstream portion of the LEBT can be un-neutralized without significant emittance growth.

  5. LBNL-46223, CBP Note 350 BEAM-BEAM SIMULATIONS FOR SEPARATED BEAMS IN THE LHC

    E-Print Network [OSTI]

    Furman, Miguel

    LBNL-46223, CBP Note 350 BEAM-BEAM SIMULATIONS FOR SEPARATED BEAMS IN THE LHC M. A. Furman, W. C. Turner, Center for Beam Physics, LBNL, Berkeley, CA 94720, USA Abstract We present beam-beam simulation of simulations: (a) to as- sess undesirable effects from LBNL's luminosity monitor- ing scheme for the LHC [2

  6. LBNL-45363, CBP Note 333 BEAM-BEAM SIMULATIONS FOR SEPARATED BEAMS

    E-Print Network [OSTI]

    Furman, Miguel

    LBNL-45363, CBP Note 333 BEAM-BEAM SIMULATIONS FOR SEPARATED BEAMS Miguel A. Furman, Center for Beam Physics, LBNL, Berkeley, CA 94720 Abstract We present beam-beam simulation results from a strong undesirable effects from LBNL's sweeping lumi- nosity monitoring scheme for the LHC [1], and (b) to assess

  7. 1Emissions Trading Workshop Summary Report Purdue Climate Change Research Center

    E-Print Network [OSTI]

    1Emissions Trading Workshop Summary Report PCCRC Purdue Climate Change Research Center EMISSIONS TRADING WORKSHOP Purdue University West Lafayette, Indiana Friday April 30, 2010 SUMMARY REPORT #12;#12;Purdue Climate Change Research Center EMISSIONS TRADING WORKSHOP Purdue University West

  8. Kick-Start Loans: Money Matters Workshop Financing Your Business Better

    E-Print Network [OSTI]

    Kim, Philip

    Kick-Start Loans: Money Matters Workshop Financing Your Business Better Summer 2014 Workshop Application Kick-Start Loans: Money Matters Workshop is a special program for M/W/DBE Construction Contractors

  9. Transverse beams stability studies at the Large Hadron Collider

    E-Print Network [OSTI]

    Buffat, Xavier; Pieloni, Tatiana

    2015-01-30T23:59:59.000Z

    A charged particle beam travelling at the speed of light produces large electromagnetic wake fields which, through interactions with its surroundings, act back on the particles in the beam. This coupled system may become unstable, resulting in a deterioration of the beam quality. Such effects play a major role in most existing storage rings, as they limit the maximum performance achievable. In a collider, the presence of a second beam significantly changes the dynamics, as the electromagnetic interactions of the two beams on each other are usually very strong and may, also, limit the collider performances. This thesis treats the coherent stability of the two beams in a circular collider, including the effects of the electromagnetic wake fields and of the beam-beam interactions, with particular emphasis on CERN's Large Hadron Collider. As opposed to other colliders, this machine features a large number of bunches per beam each experiencing multiple long-range and head-on beam-beam interactions. Existing models...

  10. Science for Society Workshop Summary Report

    SciTech Connect (OSTI)

    Wolfe, Amy K [ORNL; Bjornstad, David J [ORNL; Lenhardt, W Christopher [ORNL; Shumpert, Barry L [ORNL; Wang, Stephanie [ORNL

    2012-02-01T23:59:59.000Z

    Science for Society, a workshop held at the Oak Ridge National Laboratory (ORNL) on September 27, 20111, explored ways to move Laboratory science toward use. It sought actionable recommendations. Thus the workshop focused on: (1) current practices that promote and inhibit the translation of science into use, (2) principles that could lead to improving ORNL's translational knowledge and technology transfer efforts, and (3) specific recommendations for making these principles operational. This highly interactive workshop struck a positive chord with participants, a group of 26 ORNL staff members from diverse arenas of science and technology (S and T), technology transfer, and external laboratory relations, who represented all levels of science, technology, and management. Recognizing that the transformation of fundamental principles into operational practices often follows a jagged path, the workshop sought to identify key choices that could lead to a smoother journey along this path, as well as choices that created roadblocks and bottlenecks. The workshop emphasized a portion of this pathway, largely excluding the marketplace. Participants noted that research translation includes linkages between fundamental and applied research and development (R and D), and is not restricted to uptake by manufacturers, consumers, or end users. Three crosscutting ideas encapsulate workshop participants observations: (1) ORNL should take more action to usher the translation of its S and T products toward use, so as to make a positive national and global impact and to enhance its own competitiveness in the future; (2) ORNL (and external entities such as DOE and Congress) conveys inconsistent messages with regard to the importance of research translation and application, which (a) creates confusion, (b) poses disincentives to pursue research translation, (c) imposes barriers that inhibit cross-fertilization and collaboration, and (d) diminishes the effectiveness of both the science mission and the translation of that science for use; and (3) ORNL should design its commitments and actions for helping move science from the Laboratory toward use to align with one another and should integrate them into its institutional culture in such a way as to elevate research translation and application to coequal status with scientific excellence. Participants made several actionable recommendations for enhancing research translation at ORNL, some of which were particular to specific S and T domains. Among the recommendations that participants agreed apply Lab-wide are to: align metrics and incentives with research translation goals; manage risks and conflicts of interest instead of avoiding them; and create programs (e.g., entrepreneurial leave) that promote interactions between key ORNL staff and industry in ways that complement careers at ORNL.

  11. KT McDonald 4th High-Power Targetry Workshop May 2, 2011 1 The High-Power Target System

    E-Print Network [OSTI]

    McDonald, Kirk

    in system! Targets for 2-4 MW Proton Beams No such thing as "solid-target-only" at this power level. #12;KT that will be limited to less than 2 MW, static solid targets continue to be appealing. #12;KT McDonald 4th High-PowerKT McDonald 4th High-Power Targetry Workshop May 2, 2011 1 The High-Power Target System for a Muon

  12. Accelerators AND Beams

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout the Building Technologies Office Workshop WorkingAccelerators AND

  13. NW-Argonne Higgs Workshop Chicage May 16, 2012

    E-Print Network [OSTI]

    Field, Richard

    NW-Argonne Higgs Workshop Chicage May 16, 2012 Rick Field ­ Florida/CDF/CMS Page 1 The Next StretchV, 900 GeV, 1.96 TeV). #12;NW-Argonne Higgs Workshop Chicage May 16, 2012 Rick Field ­ Florida collider measurements! #12;NW-Argonne Higgs Workshop Chicage May 16, 2012 Rick Field ­ Florida/CDF/CMS Page

  14. DOE/BES Workshop on Clean and Efficient Combustion of 21st Century...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOEBES Workshop on Clean and Efficient Combustion of 21st Century Transportation Fuels DOEBES Workshop on Clean and Efficient Combustion of 21st Century Transportation Fuels...

  15. E-Print Network 3.0 - accelerator reliability workshop Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    reliability workshop Search Powered by Explorit Topic List Advanced Search Sample search results for: accelerator reliability workshop Page: << < 1 2 3 4 5 > >> 1 Spallation-Driven...

  16. Microsoft PowerPoint - USDOE-LANL Freeze Workshop.ppt

    Broader source: Energy.gov (indexed) [DOE]

    USDOE-LANL Freeze Workshop 1 Glenn Skala 01FEB05 Fuel Cell Activities Automotive PEM Stack Freeze Requirements & Suggested Fundamental Studies USDOE-LANL Freeze Workshop 2...

  17. The emerging roles of energy storage in a competitive power market: Summary of a DOE Workshop

    SciTech Connect (OSTI)

    Gordon, S.P.; Falcone, P.K. [eds.

    1995-06-01T23:59:59.000Z

    This report contains a summary of the workshop, {open_quotes}The Emerging Roles of Energy Storage in a Competitive Power Market,{close_quotes} which was sponsored by the U.S. Department of Energy and Sandia National Laboratories and was held in Pleasanton, California on December 6-7, 1994. More than 70 people attended, representing government agencies, national laboratories, equipment vendors, electric utilities and other energy providers, venture capital interests, and consultants. Many types of energy storage were discussed, including electrical (batteries and superconducting magnets), mechanical (flywheels and pumped hydro), hydrogen, compressed air, and thermal energy storage. The objectives of the workshop were to communicate within the energy storage community regarding the costs, benefits, and technical status of various technology options; to explore and elucidate the evolving roles of energy storage in a more dynamic and competitive power and energy marketplace; and to discuss the optimum federal role in this area. The goals of the workshop were fully realized through knowledgeable and insightful presentations and vigorous discussion, which are summarized.

  18. Broad beam ion implanter

    DOE Patents [OSTI]

    Leung, Ka-Ngo (Hercules, CA)

    1996-01-01T23:59:59.000Z

    An ion implantation device for creating a large diameter, homogeneous, ion beam is described, as well as a method for creating same, wherein the device is characterized by extraction of a diverging ion beam and its conversion by ion beam optics to an essentially parallel ion beam. The device comprises a plasma or ion source, an anode and exit aperture, an extraction electrode, a divergence-limiting electrode and an acceleration electrode, as well as the means for connecting a voltage supply to the electrodes.

  19. 2011 Alkaline Membrane Fuel Cell Workshop Final Report

    SciTech Connect (OSTI)

    Pivovar, B.

    2012-02-01T23:59:59.000Z

    A workshop addressing the current state-of-the-art in alkaline membrane fuel cells (AMFCs) was held May 8-9, 2011, at the Crystal Gateway Marriott in Arlington, Virginia. This workshop was the second of its kind, with the first being held December 11-13, 2006, in Phoenix, Arizona. The 2011 workshop and associated workshop report were created to assess the current state of AMFC technology (taking into account recent advances), investigate the performance potential of AMFC systems across all possible power ranges and applications, and identify the key research needs for commercial competitiveness in a variety of areas.

  20. 2013 Solid-State Lighting Market Introduction Workshop Presentations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Laboratory Workshop Day 1 Welcome and Introduction James Brodrick, U.S. Department of Energy Panel 1: Cost Effectiveness-Utility Perspective Marc Ledbetter, Pacific Northwest...

  1. 2012 Solid-State Lighting Market Introduction Workshop Presentations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Workshop Day 1 Welcome and Introduction James Brodrick, U.S. Department of Energy Panel 1: Product Pricing, Cost Effectiveness, and Financing James Brodrick, U.S....

  2. DOE EM Landfill Workshop and Path Forward - July 2009

    Office of Environmental Management (EM)

    SSAB Teleconference: 2. DOE EM Landfill Workshop & Path Forward Office of Groundwater and Soil Remediation US Department of Energy July 2009 Slides prepared by CRESP DOE EM...

  3. Transportation and Stationary Power Integration Workshop: A California...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A California Perspective Transportation and Stationary Power Integration Workshop: A California Perspective Overview of California regulations, latest funded hydrogen stations, and...

  4. EV Everywhere Batteries Workshop - Next Generation Lithium Ion...

    Energy Savers [EERE]

    Next Generation Lithium Ion Batteries Breakout Session Report EV Everywhere Batteries Workshop - Next Generation Lithium Ion Batteries Breakout Session Report Breakout session...

  5. EV Everywhere Batteries Workshop - Beyond Lithium Ion Breakout...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Beyond Lithium Ion Breakout Session Report EV Everywhere Batteries Workshop - Beyond Lithium Ion Breakout Session Report Breakout session presentation for the EV Everywhere Grand...

  6. Third Annual Summer Workshop in International Economics and Finance

    E-Print Network [OSTI]

    Snider, Barry B.

    Third Annual Summer Workshop in International Economics and Finance And Rosenberg Institute of Global Finance Sunday, July 13 2014 Alumni Common

  7. EV Everywhere Workshop: Traction Drive Systems Breakout Group...

    Broader source: Energy.gov (indexed) [DOE]

    the EV Everywhere Grand Challenge Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL....

  8. Workshop and Meeting Reports | OSTI, US Dept of Energy, Office...

    Office of Scientific and Technical Information (OSTI)

    of information in the physical sciences and make recommendations for increasing the productivity of the scientific enterprise in the United States. The Workshop Report laid the...

  9. Solid-State Lighting R&D Workshop

    Broader source: Energy.gov [DOE]

    Join DOE—and lighting industry experts representing the entire SSL supply chain—at the sixth annual SSL Manufacturing R&D Workshop.

  10. Resilient Electric Distribution Grid R&D Workshop - June 11,...

    Energy Savers [EERE]

    - Breakout Sessions Notes and Reports Resilient Electric Distribution Grid R&D Workshop - June 11, 2014 - Breakout Sessions Notes and Reports On June 11, 2014, the Department of...

  11. EV Everywhere Workshop: Electric Motors and Critical Materials...

    Broader source: Energy.gov (indexed) [DOE]

    Electric Motors and Critical Materials Breakout Group Report EV Everywhere Workshop: Electric Motors and Critical Materials Breakout Group Report Presentation given at the EV...

  12. WORKSHOP REPORT:Light-Duty Vehicles Technical Requirements and...

    Energy Savers [EERE]

    Light-Duty Vehicles Technical Requirements and Gaps for Lightweight and Propulsion Materials WORKSHOP REPORT:Light-Duty Vehicles Technical Requirements and Gaps for Lightweight and...

  13. WORKSHOP REPORT: Trucks and Heavy-Duty Vehicles Technical Requirements...

    Energy Savers [EERE]

    Heavy-Duty Vehicles Technical Requirements and Gaps for Lightweight and Propulsion Materials WORKSHOP REPORT: Trucks and Heavy-Duty Vehicles Technical Requirements and Gaps for...

  14. Workshop in Novel Emitters and Nanostructured Materials | U.S...

    Office of Science (SC) Website

    Workshop in Novel Emitters and Nanostructured Materials Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events...

  15. DOE human genome program contractor-grantee workshop VI

    SciTech Connect (OSTI)

    NONE

    1997-10-01T23:59:59.000Z

    Research is presented from the workshop on the Human Genome Project. Topics include sequencing, genetic mapping, informatics, ethical and legal issues, and infrastructure.

  16. 2015 Project Development and Finance Workshop Agenda and Presentations

    Broader source: Energy.gov [DOE]

    The Office of Indian Energy hosted three back-to-back Alaska Renewable Energy Project Development and Finance Workshops in Alaska.

  17. archive management workshop: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    kind of acceptable archival management Gilliland, Anne; White, Kelvin 2009-01-01 122 DOE Hydrogen Pipeline Working Group Workshop Renewable Energy Websites Summary: DOE Hydrogen...

  18. Applied Mathematics Conferences and Workshops | U.S. DOE Office...

    Office of Science (SC) Website

    - Workshop Report .pdf file (758KB) SUPPORTED Multiscale Mathematics and High Performance Computing Summer School July 21-23, 2008. Pacific Northwest National Laboratory (PNNL)...

  19. Regulatory Roadmap Workshop for Federal Bulk Transmission Regulations...

    Open Energy Info (EERE)

    Regulatory Roadmapping Pgower's picture Submitted by Pgower(45) Member 7 August, 2014 - 13:19 One-day workshop to review regulatory roadmaps for bulk transmission. Date:...

  20. 5th Annual CHP Roadmap Workshop Breakout Group Results, September...

    Broader source: Energy.gov (indexed) [DOE]

    Heat and Power (CHP) Workshop from the following breakout groups: CHP Technologies, CHP Markets, Utility and Regulatory Issues, and CHP Education and Outreach 2004austin.pdf...

  1. Proceedings of the fifth annual geothermal conference and workshop

    SciTech Connect (OSTI)

    Not Available

    1981-11-01T23:59:59.000Z

    Forty-four papers are included. One paper was abstracted previously for EDB. Separate abstracts were prepared for forty-three. The workshop reports were not abstracted. (MHR)

  2. Opening the Door: San Diego R&D Workshop Video

    Broader source: Energy.gov [DOE]

    View the video from Jim Brodrick's opening presentation at the February 2011 DOE SSL R&D Workshop in San Diego, California.

  3. Text-Alternative Version: Philadelphia Market Introduction Workshop Video

    Broader source: Energy.gov [DOE]

    Following is a text version of Jim Brodrick's opening presentation video from the July 2010 DOE SSL Market Introduction Workshop in Philadelphia, Pennsylvania.

  4. Text-Alternative Version: Seattle Market Introduction Workshop Video

    Broader source: Energy.gov [DOE]

    Following is a text version of Jim Brodrick's welcome presentation video from the July 2011 DOE SSL Market Introduction Workshop in Seattle, Washington.

  5. Text-Alternative Version: Raleigh R&D Workshop Video

    Broader source: Energy.gov [DOE]

    Following is a text version of Jim Brodrick's opening presentation video from the February 2010 DOE SSL R&D Workshop in Raleigh, North Carolina.

  6. A Bold Goal: Boston Manufacturing R&D Workshop Video

    Broader source: Energy.gov [DOE]

    View the video from Jim Brodrick's opening presentation at the April 2011 DOE SSL Manufacturing R&D Workshop in Boston, Massachusetts.

  7. Summary of the LHC Performance Workshop - Chamonix 2010

    ScienceCinema (OSTI)

    None

    2011-10-06T23:59:59.000Z

    Summary of the LHC Performance Workshop, held in Chamonix from 25 - 29 January 2010. Steve Myers Chairman Roger Bailey Deputy Chairman Frank Zimmermann Scientific Secretary

  8. Visualizing Assembling Everything (2010 JGI/ANL HPC Workshop)

    ScienceCinema (OSTI)

    Jaffe, David; Gnerre, Sante

    2011-06-08T23:59:59.000Z

    David Jaffe and Sante Gnerre of the Broad Institute give a presentation on "Visualizing assembling everything" at the JGI/Argonne HPC Workshop on January 25, 2010.

  9. astrophysics international workshop: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and cosmological models. Heino Falcke; Peter L. Biermann 1997-11-07 5 Workshop on Thermonuclear Reaction Rates for Astrophysics Applications Computer Technologies and Information...

  10. 2014 International Workshop on Grid Simulator Testing | Department...

    Broader source: Energy.gov (indexed) [DOE]

    the second International Workshop on Grid Simulator Testing of Energy Systems and Wind Turbine Powertrains at the Duke Energy Electric Grid Research, Innovations and Development...

  11. Alaska Energy Workshop Tour Creates Rich Opportunities for Knowledge...

    Energy Savers [EERE]

    Sharing April 16, 2015 - 11:11am Addthis Sherry Stout presents at the Native Village Renewable Energy Project Development workshop in Dillingham, Alaska. Photo by Sherry Stout,...

  12. aeroacoustics caa workshop: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    an informal meeting, ... Davis, Randall 215 Purdue Climate Change Research Center Emissions Trading Workshop Environmental Sciences and Ecology Websites Summary: Purdue Climate...

  13. 2008 Workshop on The Nation's Needs for Isotopes: Present and...

    Office of Science (SC) Website

    Reports Workshops Nuclear Physics Related Brochures and Videos Contact Information Nuclear Physics U.S. Department of Energy SC-26Germantown Building 1000 Independence...

  14. advanced research workshop: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    can be of value in understanding metrological data. 1 Percival, Don 24 Purdue Climate Change Research Center Emissions Trading Workshop Environmental Sciences and Ecology Websites...

  15. Workshop on The Nation's Needs for Isotopes: Present and Future...

    Office of Science (SC) Website

    Workshop on The Nation's Needs for Isotopes: Present and Future Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Funding Opportunities...

  16. Utility Wind Integration Group Distributed Wind/Solar Interconnection Workshop

    Broader source: Energy.gov [DOE]

    This two-day workshop will answer your questions about interconnecting wind and solar plants and other distributed generation applications to electric distribution systems while providing insight...

  17. Condensing Heating and Water Heating Equipment Workshop Location...

    Energy Savers [EERE]

    Condensing Heating and Water Heating Equipment Workshop Location: Washington Gas Light Appliance Training Facility 6801 Industrial Road Springfield, VA Date: October 9, 2014 Time:...

  18. BP's Perspective on Emissions Purdue Emissions Trading Workshop

    E-Print Network [OSTI]

    BP's Perspective on Emissions Trading Purdue Emissions Trading Workshop April 30, 2010 Mark - Government policies can create a carbon price via three primary mechanisms: - Emissions trading (BP's strong

  19. EV Everywhere Batteries Workshop - Pack Design and Optimization...

    Broader source: Energy.gov (indexed) [DOE]

    Pack Design and Optimization Breakout Session Report EV Everywhere Batteries Workshop - Pack Design and Optimization Breakout Session Report Breakout session presentation for the...

  20. Smart Grid Investment Grant Program (SGIG) Recipient Workshop...

    Broader source: Energy.gov (indexed) [DOE]

    Smart Grid Investment Grant (SGIG) Kickoff Welcome and Overview: Familiarize SGIG selectees with Grant Award Process. Smart Grid Investment Grant Program (SGIG) Recipient Workshop:...