Powered by Deep Web Technologies
Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

ISSUANCE 2014-12-31: Energy Conservation Program: Energy Conservation Standards for Automatic Commercial Ice Makers, Final Rule  

Broader source: Energy.gov [DOE]

Energy Conservation Program: Energy Conservation Standards for Automatic Commercial Ice Makers, Final Rule

2

Webinar: Energy Conservation Standards for Automatic Commercial Ice Makers; Notice of Public Meeting  

Broader source: Energy.gov [DOE]

DOE is conducting a public meeting and webinar for the notice of public meeting regarding energy conservation standards for automatic commercial ice makers. For more information, please visit the...

3

Transferring Data from Batch Jobs at NERSC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transferring Data from Batch Jobs Transferring Data from Batch Jobs Examples Once you are set up for automatic authentication (see HPSS Passwords) you can access HPSS within batch...

4

2014-03-07 Issuance: Energy Conservation Standards for Automatic Commercial Ice Makers; Notice of Proposed Rulemaking  

Broader source: Energy.gov [DOE]

This document is a pre-publication Federal Register notice of proposed rulemaking regarding energy conservation standards for automatic commercial ice makers, as issued by the Assistant Secretary on March 7, 2014.

5

2014-06-09 Issuance: Energy Conservation Standards for Automatic Commercial Ice Makers; Notice of Public Meeting  

Broader source: Energy.gov [DOE]

This document is a pre-publication Federal Register Notice of Public Meeting regarding Energy Conservation Standards for Automatic Commercial Ice Maker, as issued by the Deputy Assistant Secretary for Energy Efficiency on June 9, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

6

Ice  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ice Ice Nature Bulletin No. 661-A january 7, 1978 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation ICE There was a time when ice, cut on frozen ponds and lakes, was transported by fast clipper ships from New England to New Orleans where it was worth its weight in gold. Nowadays this cold brittle colorless substance is commonplace everywhere. Few people, however, know that ice is one of the strangest of all solids; and that, because of its unique properties, life on earth is what it is. Those properties are due to the distinctive structure of a molecule of water, formed of three elemental particles or atoms -- two of hydrogen and one of oxygen -- expressed by the familiar symbol, H2O. The three atoms are held together by two chemical bonds expressed by another symbol, H-O-H. Briefly, the unique properties of water, water vapor, and ice arise from that bonding and the arrangement of electron pairs around the oxygen atom.

7

2014-09-05 Issuance: Energy Conservation Standards for Automatic Commercial Ice Makers; Notice of Data Availability and Request for Comment  

Broader source: Energy.gov [DOE]

This document is a pre-publication Federal Register notice of data availability and request for comment regarding energy conservation standards for automatic commercial ice makers, as issued by the Deputy Assistant Secretary for Energy Efficiency on September 5, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

8

PDSF Interactive Batch Jobs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Interactive Batch Jobs Running Interactive Batch Jobs You cannot login to the PDSF batch nodes directly but you can run an interactive session on a batch node using either qlogin...

9

Automatic Commercial Ice Makers  

Broader source: Energy.gov [DOE]

The Department of Energy (DOE) develops standardized data templates for reporting the results of tests conducted in accordance with current DOE test procedures. Templates may be used by third-party laboratories under contract with DOE that conduct testing in support of ENERGY STAR verification, DOE rulemakings, and enforcement of the federal energy conservation standards.

10

Hopper Batch Jobs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Batch Jobs Batch Jobs Batch Jobs Overview Batch jobs are jobs that run non-interactively under the control of a "batch script," which is a text file containing a number of job directives and LINUX commands or utilities. Batch scripts are submitted to the "batch system," where they are queued awaiting free resources on Hopper. The batch system on Hopper is known as "Torque." Bare-Bones Batch Script The simplest Hopper batch script will look something like this. #PBS -q regular #PBS -l mppwidth=48 #PBS -l walltime=00:10:00 cd $PBS_O_WORKDIR aprun -n 48 ./my_executable This example illustrates the basic parts of a script: Job directive lines begin with #PBS. These "Torque Directives" tell the batch system how many nodes to reserve for your job and how long to

11

Edison Batch Jobs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Batch Jobs Batch Jobs Batch Jobs Overview Batch jobs are jobs that run non-interactively under the control of a "batch script," which is a text file containing a number of job directives and LINUX commands or utilities. Batch scripts are submitted to the "batch system," where they are queued awaiting free resources on Edison. The batch system on Edison is known as "Torque." Bare-Bones Batch Script The simplest Edison batch script will look something like this. #PBS -q regular #PBS -l mppwidth=32 #PBS -l walltime=00:10:00 cd $PBS_O_WORKDIR aprun -n 32 ./my_executable This example illustrates the basic parts of a script: Job directive lines begin with #PBS. These "Torque Directives" tell the batch system how many nodes to reserve for your job and how long to

12

Edison Batch Jobs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Batch Jobs Batch Jobs Batch Jobs Overview Batch jobs are jobs that run non-interactively under the control of a "batch script," which is a text file containing a number of job directives and LINUX commands or utilities. Batch scripts are submitted to the "batch system," where they are queued awaiting free resources on Edison. The batch system on Edison is known as "Torque." Bare-Bones Batch Script The simplest Edison batch script will look something like this. #PBS -q regular #PBS -l mppwidth=48 #PBS -l walltime=00:10:00 cd $PBS_O_WORKDIR aprun -n 48 ./my_executable This example illustrates the basic parts of a script: Job directive lines begin with #PBS. These "Torque Directives" tell the batch system how many nodes to reserve for your job and how long to

13

IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING, VOL. 42, NO. 7, JULY 2004 1433 Automatic Detection and Validity of the Sea-Ice  

E-Print Network [OSTI]

by insulating the ocean from the atmosphere and increasing the surface albedo. Sea-ice Manuscript received Detection and Validity of the Sea-Ice Edge: An Application of Enhanced-Resolution QuikScat/SeaWinds Data Abstract--Sea-ice edge detection is an essential task at the different national ice services to secure

Long, David G.

14

PDSF Interactive Batch Jobs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Interactive Batch Jobs Interactive Batch Jobs Running Interactive Batch Jobs You cannot login to the PDSF batch nodes directly but you can run an interactive session on a batch node using either qlogin or qsh. This can be useful if you are doing something that is potentially disruptive or if the interactive nodes are overloaded. qlogin will give you an interactive session in the same window as your original session on PDSF, however, you must have your ssh keys in place. Due to system limitations there is a small (but important) difference in the user environment you get when you use qlogin. When you receive a shell prompt with qlogin, your CHOS environment is not set up for you. In order to set up the CHOS environment of your choice you will need to manually chos into the chos environment of your choice:

15

Batch Script Examples  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Batch Script Examples Batch Script Examples Batch Script Examples My First Script This is a simple example that you can use to make sure that your settings are correct before submitting more complicated jobs. First, copy the contents of hello.sh into a file. genepool% cat hello.sh #!/bin/bash sleep 120 echo "Hello World" Then submit your job with the qsub command genepool% qsub hello.sh Monitor your job with the qstat command: genepool% qstat -u You can also get more detailed information about your job using: genepool% qstat -j The job id can be found using the qstat -u command. Basic Batch Script Here is an example of a basic script that specifies the working directory, the shell and the queue. The #$ must be used to specify the grid engine

16

Example Edison Batch Scripts  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Example Batch Scripts Example Batch Scripts Example Batch Scripts The default number of cores per node on Edison is 16, and the default "mppnppn" setting is 16. However, if you run with hyperthreading (HT), Edison compute nodes have 32 cores per node, and the mppnppn value needs to be set to 32. In addition, the "-j 2" option needs to be added to the "aprun" command. In most of the following example batch scripts, the default number of 16 cores per node is used. Basic Scripts Sample Job script This script uses the default 16 cores per node. This job will run on 64 nodes, with 1024 cores. #PBS -q debug #PBS -l mppwidth=1024 #PBS -l walltime=00:10:00 #PBS -N my_job #PBS -j oe #PBS -V cd $PBS_O_WORKDIR aprun -n 1024 ./my_executable Sample job script to run with Hyperthreading (HT)

17

PDSF Batch Job Example  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

PDSF Batch Job Example PDSF Batch Job Example PDSF Batch Job Example On this page we show an example of how to run a simple batch job, monitor it, check its output, and look at the SGE accounting information about it. We start with a simple script named hello.csh, which just sleeps a bit and then writes some output: pdsf4 72% cat hello.csh #!/bin/csh sleep 600 echo "Hello, World" The simplest way to submit it is to just use qsub without any options: pdsf4 74% qsub hello.csh Your job 1787239 ("hello.csh") has been submitted We can check on its status with qstat. Use the -u option to get only your jobs: pdsf4 75% qstat -u hjort job-ID prior name user state submit/start at queue slots ja-task-ID -----------------------------------------------------------------------------------------------------------------

18

Example Edison Batch Scripts  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Example Batch Scripts Example Batch Scripts Example Batch Scripts Edison has 24 cores (physical cores) per node, so the default "mppnppn" value is set to 24 for all queues. If you run with hyperthreading (HT), Edison has 48 logical cores per node, and the mppnppn value can be set to 48. However, this is not required. The "-j 2" option of the "aprun" command allows you to use all 48 logical cores on the nodes. In most of the following example batch scripts, we assume that jobs are run without Hyperthreading unless explicitly mentioned, therefore the default mppnppn value, 24, is used. Basic Scripts Sample Job script This script uses the default 24 cores per node. This job will run on 64 nodes, with 1536 cores. #PBS -q debug #PBS -l mppwidth=1536 #PBS -l walltime=00:10:00

19

Submitting Batch Jobs on Carver  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Submitting Batch Jobs Submitting Batch Jobs Submitting Batch Jobs Overview A batch job is the most common way users run production applications on NERSC machines. Carver's batch system is based on the PBS model, implemented with the Moab scheduler and Torque resource manager. Typically, the user submits a batch script to the batch system. This script specifies, at the very least, how many nodes and cores the job will use, how long the job will run, and the name of the application to run. The job will advance in the queue until it has reached the top. At this point, Torque will allocate the requested number of nodes to the batch job. The batch script itself will execute on the "head node" (sometimes known as the "MOM" node). See Queues and Policies for details of batch queues, limits,

20

Parallel Batch Scripts  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Parallel Batch Scripts Parallel Batch Scripts Parallel Batch Scripts Parallel Environments on Genepool You can run parallel jobs that use MPI or OpenMP on Genepool as long as you make the appropriate changes to your submission script! To investigate the parallel environments that are available on Genepool, you can use Command Description qconf -sp Show the configuration for the specified parallel environment. qconf -spl Show a list of all currently configured parallel environments. Basic Parallel Example If your job requires the default 5GB of memory per slot, you can do the following: #!/bin/bash # # == Set SGE options: # # -- ensure BASH is used # -- run the job in the current working directory (where qsub is called) #$ -cwd # -- run with the environment variables from the User's environment

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

PDSF Batch Statistics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Usage Summaries PDSF Group Batch Summary Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2014 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 Partial SGE62...

22

Submitting Batch Jobs on Franklin  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Submitting Batch Jobs Submitting Batch Jobs Debug Jobs Short jobs requesting less than 30 minutes and requiring 512 nodes (2,048 cores) or fewer can run in the debug queue. From...

23

Modified coal batch in coking  

Science Journals Connector (OSTI)

The influence of volatile products from low-metamorphic poorly clinkering G coal on plasticmass formation in rammed batch during coking is considered. An experimental batch of modified coke has been produced at P...

A. G. Starovoit; E. I. Malyi; M. S. Chemerinskii; M. A. Starovoit

2013-05-01T23:59:59.000Z

24

MULTIVESSEL BATCH DISTILLATION EXPERIMENTAL VERIFICATION  

E-Print Network [OSTI]

MULTIVESSEL BATCH DISTILLATION ­ EXPERIMENTAL VERIFICATION Bernd Wittgens and Sigurd Skogestad 1 The experimental verification of the operation of a multivessel batch distillation column, operated under total vessels, provides a generalization of previously proposed batch distillation schemes. We propose a simple

Skogestad, Sigurd

25

Prevention of ice formation in light-aircraft-engine induction systems by using an automatic control to operate the carburetor-air heater  

E-Print Network [OSTI]

range of atmospheric conditions and engine power settings. The limits of serious icing at the various power set- tings for a typical float-type carburetor from an engine in the 65 to 85 horsepower range, as found by Coles (4)H are as zollows: Engine.... occur with a change in vapor pressure of about fifteen pounds per square inch. Since the unit is large enough to be afi'eoted by atmospheric pressure changes, an additional bellows would be necessary to compensate for these changes. This would sdd...

Whisenhunt, Garland Bishop

1955-01-01T23:59:59.000Z

26

Submitting Batch Jobs on Franklin  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Submitting Batch Jobs Submitting Batch Jobs Submitting Batch Jobs Debug Jobs Short jobs requesting less than 30 minutes and requiring 512 nodes (2,048 cores) or fewer can run in the debug queue. From 5am-6pm Pacific Time, 256 nodes are reserved for debugging and interactive use. See also, running Interactive Jobs. Sample Batch Scripts The following batch script requests 8 cores on 2 nodes with a 10 minute wall clock limit in the debug queue. Torque directive lines tell the batch system how to run a job and begin with #PBS. #PBS -q debug #PBS -l mppwidth=8 #PBS -l walltime=00:10:00 #PBS -j eo #PBS -V cd $PBS_O_WORKDIR aprun -n 8 ./a.out Here is another example requesting 8 processors using 4 nodes with only 2 cores per node: #PBS -q debug #PBS -l mppwidth=8 #PBS -l mppnppn=2 #PBS -l walltime=00:10:00

27

Progressing batch hydrolysis process  

DOE Patents [OSTI]

A progressive batch hydrolysis process is disclosed for producing sugar from a lignocellulosic feedstock. It comprises passing a stream of dilute acid serially through a plurality of percolation hydrolysis reactors charged with feed stock, at a flow rate, temperature and pressure sufficient to substantially convert all the cellulose component of the feed stock to glucose. The cooled dilute acid stream containing glucose, after exiting the last percolation hydrolysis reactor, serially fed through a plurality of pre-hydrolysis percolation reactors, charged with said feedstock, at a flow rate, temperature and pressure sufficient to substantially convert all the hemicellulose component of said feedstock to glucose. The dilute acid stream containing glucose is cooled after it exits the last prehydrolysis reactor.

Wright, J.D.

1985-01-10T23:59:59.000Z

28

Progressing batch hydrolysis process  

DOE Patents [OSTI]

A progressive batch hydrolysis process for producing sugar from a lignocellulosic feedstock, comprising passing a stream of dilute acid serially through a plurality of percolation hydrolysis reactors charged with said feedstock, at a flow rate, temperature and pressure sufficient to substantially convert all the cellulose component of the feedstock to glucose; cooling said dilute acid stream containing glucose, after exiting the last percolation hydrolysis reactor, then feeding said dilute acid stream serially through a plurality of prehydrolysis percolation reactors, charged with said feedstock, at a flow rate, temperature and pressure sufficient to substantially convert all the hemicellulose component of said feedstock to glucose; and cooling the dilute acid stream containing glucose after it exits the last prehydrolysis reactor.

Wright, John D. (Denver, CO)

1986-01-01T23:59:59.000Z

29

Using the PDSF Batch System  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

System System Using the PDSF Batch System Submitting PDSF Jobs UGE (Univa Grid Engine) is the batch system used at PDSF. Read More » Scratch Space Use on Compute Nodes Use $TMPDIR and not /scratch or /tmp directly. Read More » I/O Resources I/O resources are in important tool at PDSF and this page describes how to use them. Read More » Running Interactive Batch Jobs This page describes when you should consider working in an interactive batch session and how to do it. Read More » Monitoring and Managing Jobs This page is about what you can do with your jobs after you have submitted them. Read More » Getting Info about Completed Jobs UGE accounting information about all jobs is available and this page describes how to access it. Read More » PDSF Batch Job Example

30

Multivessel Batch Distillation -Potential Energy Savings  

E-Print Network [OSTI]

Multivessel Batch Distillation - Potential Energy Savings Bernd Wittgens and Sigurd Skogestad 1, Norway ABSTRACT - A conventional batch distillation column operated under feedback control applying the proposed policy is compared to the multivessel batch distillation column. In some cases we found

Skogestad, Sigurd

31

Image Content Engine (ICE)  

SciTech Connect (OSTI)

The Image Content Engine (ICE) is being developed to provide cueing assistance to human image analysts faced with increasingly large and intractable amounts of image data. The ICE architecture includes user configurable feature extraction pipelines which produce intermediate feature vector and match surface files which can then be accessed by interactive relational queries. Application of the feature extraction algorithms to large collections of images may be extremely time consuming and is launched as a batch job on a Linux cluster. The query interface accesses only the intermediate files and returns candidate hits nearly instantaneously. Queries may be posed for individual objects or collections. The query interface prompts the user for feedback, and applies relevance feedback algorithms to revise the feature vector weighting and focus on relevant search results. Examples of feature extraction and both model-based and search-by-example queries are presented.

Brase, J M

2007-03-26T23:59:59.000Z

32

Batch Queues and Policies on Hopper  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Cori Edison Hopper Updates and Status Getting Started Configuration Programming Running Jobs Overview Interactive Jobs Batch Jobs Example Batch Scripts Using aprun Queues and...

33

Batch compositions for cordierite ceramics  

DOE Patents [OSTI]

Ceramic products consisting principally of cordierite and a method for making them are provided, the method employing batches comprising a mineral component and a chemical component, the mineral component comprising clay and talc and the chemical component consisting essentially of a combination of the powdered oxides, hydroxides, or hydrous oxides of magnesium, aluminum and silicon. Ceramics made by extrusion and firing of the batches can exhibit low porosity, high strength and low thermal expansion coefficients.

Hickman, David L. (Big Flats, NY)

1994-07-26T23:59:59.000Z

34

Batch Effects and Pathway Analysis: Two Potential Perils in Cancer Studies Involving DNA Methylation Array Analysis  

Science Journals Connector (OSTI)

...dry ice, first to Dhaka by car, then to Columbia University...members of the first having water As concentrations between 50...members of the second having water As concentrations over 100 mug...if they are not aware of the power of batch effects, they may...

Kristin N. Harper; Brandilyn A. Peters; and Mary V. Gamble

2013-06-01T23:59:59.000Z

35

POTENTIAL ENERGY SAVINGS OF MULTIVESSEL BATCH DISTILLATION  

E-Print Network [OSTI]

POTENTIAL ENERGY SAVINGS OF MULTIVESSEL BATCH DISTILLATION Bernd Wittgens and Sigurd Skogestad 1, Norway ABSTRACT - A conventional batch distillation column operated under feedback control applying the proposed policy is compared to the multivessel batch distillation column. In some cases we found

Skogestad, Sigurd

36

Multivessel Batch Distillation Potential Energy Savings  

E-Print Network [OSTI]

Multivessel Batch Distillation ­ Potential Energy Savings Bernd Wittgens and Sigurd Skogestad 1, Norway ABSTRACT ­ A conventional batch distillation column operated under feedback control applying the proposed policy is compared to the multivessel batch distillation column. In some cases we found

Skogestad, Sigurd

37

POTENTIAL ENERGY SAVINGS OF MULTIVESSEL BATCH DISTILLATION  

E-Print Network [OSTI]

POTENTIAL ENERGY SAVINGS OF MULTIVESSEL BATCH DISTILLATION Bernd Wittgens and Sigurd Skogestad 1, Norway ABSTRACT ­ A conventional batch distillation column operated under feedback control applying the proposed policy is compared to the multivessel batch distillation column. In some cases we found

Skogestad, Sigurd

38

TOTAL REFLUX OPERATION OF MULTIVESSEL BATCH DISTILLATION  

E-Print Network [OSTI]

TOTAL REFLUX OPERATION OF MULTIVESSEL BATCH DISTILLATION BERND WITTGENS, RAJAB LITTO, EVA S RENSEN a generalization of previously proposed batch distillation schemes. A simple feedback control strategy for total re verify the simulations. INTRODUCTION Although batch distillation generally is less energy e cient than

Skogestad, Sigurd

39

TOTAL REFLUX OPERATION OF MULTIVESSEL BATCH DISTILLATION  

E-Print Network [OSTI]

TOTAL REFLUX OPERATION OF MULTIVESSEL BATCH DISTILLATION BERND WITTGENS, RAJAB LITTO, EVA S?RENSEN in this paper provides a generalization of previously proposed batch distillation schemes. A simple feedback been built and the experiments verify the simulations. INTRODUCTION Although batch distillation

Skogestad, Sigurd

40

Batch Scheduling with Deadlines on Parallel Machines  

E-Print Network [OSTI]

Batch Scheduling with Deadlines on Parallel Machines Peter Brucker Mikhail Y. Kovalyov, Yakov M of scheduling G groups of jobs on m parallel machines is considered. Each group consists of several identical) and to schedule the batches on the machines. It is possible for different batches of the same group

Magdeburg, Universität

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

SHAPE-CONSTRAINED SEGMENTATION APPROACH FOR ARCTIC MULTIYEAR SEA ICE FLOE ANALYSIS  

E-Print Network [OSTI]

for automatic ice floe tracking from Synthetic Aperture Radar or optical remote sensing imagery employ adaptiveSHAPE-CONSTRAINED SEGMENTATION APPROACH FOR ARCTIC MULTIYEAR SEA ICE FLOE ANALYSIS Yuliya Tarabalka Research Association, MD, USA. e-mail: yuliya.tarabalka@inria.fr ABSTRACT The melting of sea ice

Boyer, Edmond

42

Ice Fishing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ice Fishing Ice Fishing Nature Bulletin No. 327-A January 11, 1969 Forest Preserve District of Cook County Richard B. Ogilvie, President Roland F. Eisenbeis, Supt. of Conservation ICE FISHING We have a peculiar class of people known as the "Frosty-toed Tribe". As soon as winter comes and the ice permits, they put on all the clothes they own and what they can borrow, pack their automobiles with equipment, and start early in the morning for some inland body of water or a bay along one of the Great Lakes. Usually, two or three go together and they may drive 50 or 100 miles. For hours, even in below zero weather, they huddle around holes cut in the ice, fishing patiently, sustained by hope, hot coffee, and a lot of conversation. Some days a man may catch nothing. Other days he may bring home all the law allows. Sometimes he fishes vainly until almost sundown and then begins to haul them in, all of the same kind and size, as fast as he can re-bait his hook. In the meantime, other anglers have rushed over, cut holes, and are fishing all around him -- usually in vain, because one of the strange things about ice fishing is that, although you may catch fish out of one hole, you may get nothing out of another only a few feet from it, using the same kind of bait at the same depth. There are a lot of hotly contested theories but nobody knows why. After watching and questioning scores of ice fishermen, some of them noted for their prowess, we find that although each has his own secret techniques and favorite spots, good catches seem more a matter of luck than skill. Although they are sluggish and don't fight, fish caught in winter have the firmest flesh and finest flavor. The biggest thrill comes from the skillet.

43

Adding coal dust to coal batch  

SciTech Connect (OSTI)

The granulometric composition of coke dust from the dry-slaking machine is determined. The influence of additions of 3-7% coke dust on the quality of industrial coking batch and the coke obtained by box coking is estimated. Adding 1% coke dust to coking batch does not markedly change the coke quality. Industrial equipment for the supply of dry-slaking dust to the batch is described.

V.S. Shved; A.V.Berezin [OAO Koks, Kemerovo (Russian Federation)

2009-05-15T23:59:59.000Z

44

Synthesis of azeotropic batch distillation separation systems  

SciTech Connect (OSTI)

The sequencing of batch distillation systems, in particular batch distillation columns, can be complicated by the existence of azeotropes in the mixture. These azeotropes can form batch distillation regions where, depending on the initial feed to the batch column, the types of feasible products and separations are limited. It is very important that these distillation regions are known while attempting to synthesize sequences of batch columns so infeasible designs can be eliminated early on in the design phase. The distillation regions also give information regarding the feasible products that can be obtained when the mixture is separated by using a variety of batch column configurations. The authors will show how a tool for finding the batch distillation regions of a particular mixture can be used in the synthesis of batch distillation column sequences. These sequences are determined by the initial feed composition to the separation network. The network of all possible sequences will be generated by using state-task networks when batch rectifying, stripping, middle vessel, and extractive middle vessel columns are allowed. The authors do not determine which sequence is the best, as the best sequence will depend on the particular application to which one is applying the algorithms. They show an example problem for illustration of this technique.

Safrit, B.T. [Eastman Chemical Co., Kingsport, TN (United States)] [Eastman Chemical Co., Kingsport, TN (United States); Westerberg, A.W. [Carnegie Mellon Univ., Pittsburgh, PA (United States)] [Carnegie Mellon Univ., Pittsburgh, PA (United States)

1997-05-01T23:59:59.000Z

45

Analysis and Control of Heteroazeotropic Batch Distillation  

E-Print Network [OSTI]

Analysis and Control of Heteroazeotropic Batch Distillation S. Skouras and S. Skogestad Dept.interscience.wiley.com). The separation of close-boiling and azeotropic mixtures by heterogeneous azeotropic distillation is addressed. The results show that heteroazeotropic batch distillation exhibits substantial flexibility. The column profile

Skogestad, Sigurd

46

CASCADE OPTIMIZATION AND CONTROL OF BATCH REACTORS  

E-Print Network [OSTI]

CASCADE OPTIMIZATION AND CONTROL OF BATCH REACTORS Xiangming Hua, Sohrab Rohani and Arthur Jutan ajutan@uwo.ca Abstract: In this study, a cascade closed-loop optimization and control strategy for batch reactor. Using model reduction a cascade system is developed, which can effectively combine optimization

Jutan, Arthur

47

Batch Upload | Scientific and Technical Information Program  

Office of Scientific and Technical Information (OSTI)

Notices » Automated Protocols Notices » Automated Protocols Batch Upload Print page Print page Email page Email page One option for electronically submitting AN 241.1 data is Batch Upload (Site-to-OSTI). This method allows sites to upload metadata in a batch XML file at any time. The uploaded XML file is formatted according to the requirements of OSTI's XML. The Batch Upload process allows sites to export data from existing databases and upload it to OSTI. The process is customized for the submitting site. Full text documents can also be uploaded. Sites choose how often and how many records each file will contain. Sites also choose whether to include in the metadata a URL to the site-hosted full text or an uploaded full text. Unclassified documents with CUI access limitations MUST be input to E-Link via the Web Announcement Notice 241.1.

48

Heteroazeotropic Batch Distillation Feasibility and Operation  

E-Print Network [OSTI]

Heteroazeotropic Batch Distillation Feasibility and Operation by Efstathios Skouras and distillation is the dominating unit operation for such separations. However, the presence of azeotropes and non distillation as the best suited process. Among, various techniques to enhance distillation, heterogeneous

Skogestad, Sigurd

49

ja_post_advisors_batch Page 1 Posting Advisors in Batch  

E-Print Network [OSTI]

ja_post_advisors_batch Page 1 Posting Advisors in Batch Validate that the student does not have the `new' advisor posted. For example, this student currently has one advisor (Advisor Type = ADVR) Alice Turner. Navigation Path: Records and Enrollment ­ Student Background Information ­ Student Advisor Upload

50

Mars gets new icing  

Science Journals Connector (OSTI)

... north pole. Here the ice-cap shrinks each summer as a veneer of carbon dioxide burns off, revealing plenty of less volatile water ice beneath. The ice-cap at the ... beneath. The ice-cap at the red planet's south pole is covered with strange pits, called Swiss-cheese features. They have flat bottoms and steep sides; some are ...

Philip Ball

2003-02-14T23:59:59.000Z

51

Running Jobs with the UGE Batch System  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Jobs Jobs Running Jobs Submitting Jobs How to submit your job to the UGE. Read More » Running with Java Solutions to some of the common problems users have with running on Genepool when the JVM is part of their workflow. Read More » Batch Script Examples Sample batch scripts for Genepool/Phoebe highlighting queue selection, setting the run time and requesting large amounts of memory. Read More » Interactive Jobs How to run your workflow on the interactive nodes. Read More » Job Arrays Job arrays are a way to efficiently submit large numbers of jobs. Read More » Parallel Batch Scripts This page has examples of how to run parallel jobs on Genepool. Read More » Best Practices - and Practices to Avoid Things users should do to run jobs efficiently using UGE. Read More »

52

Arctic ice islands  

SciTech Connect (OSTI)

The development of offshore oil and gas resources in the Arctic waters of Alaska requires offshore structures which successfully resist the lateral forces due to moving, drifting ice. Ice islands are floating, a tabular icebergs, up to 60 meters thick, of solid ice throughout their thickness. The ice islands are thus regarded as the strongest ice features in the Arctic; fixed offshore structures which can directly withstand the impact of ice islands are possible but in some locations may be so expensive as to make oilfield development uneconomic. The resolution of the ice island problem requires two research steps: (1) calculation of the probability of interaction between an ice island and an offshore structure in a given region; and (2) if the probability if sufficiently large, then the study of possible interactions between ice island and structure, to discover mitigative measures to deal with the moving ice island. The ice island research conducted during the 1983-1988 interval, which is summarized in this report, was concerned with the first step. Monte Carlo simulations of ice island generation and movement suggest that ice island lifetimes range from 0 to 70 years, and that 85% of the lifetimes are less then 35 years. The simulation shows a mean value of 18 ice islands present at any time in the Arctic Ocean, with a 90% probability of less than 30 ice islands. At this time, approximately 34 ice islands are known, from observations, to exist in the Arctic Ocean, not including the 10-meter thick class of ice islands. Return interval plots from the simulation show that coastal zones of the Beaufort and Chukchi Seas, already leased for oil development, have ice island recurrences of 10 to 100 years. This implies that the ice island hazard must be considered thoroughly, and appropriate safety measures adopted, when offshore oil production plans are formulated for the Alaskan Arctic offshore. 132 refs., 161 figs., 17 tabs.

Sackinger, W.M.; Jeffries, M.O.; Lu, M.C.; Li, F.C.

1988-01-01T23:59:59.000Z

53

Atlas Sodium Automated Batch Synthesis System  

E-Print Network [OSTI]

Atlas Sodium Automated Batch Synthesis System (Syrris) June 2013 #12;Introduction to the system · The Atlas Sodium system consists of an Atlas base equipped with a 400ºC hotplate, a stacking dry bath systemL) for automated addition and/or removal of solution. · The system is computer controlled by the Atlas software

Subramanian, Venkat

54

Industrial coking of coal batch without bituminous coal  

Science Journals Connector (OSTI)

For many years, Kuznetsk-coal batch has always included bituminous coal. Depending on the content of such coal, the batch may be characterized as lean ... classification was adopted by specialists of the Eastern

P. V. Shtark; Yu. V. Stepanov; N. K. Popova; D. A. Koshkarov

2008-03-01T23:59:59.000Z

55

Wind, sea ice, inertial oscillations and upper ocean mixing in Marguerite Bay, Western Antarctic Peninsula : observations and modeling  

E-Print Network [OSTI]

Two years of moored oceanographic and automatic weather station data which span the winter ice seasons of 2001-2003 within Marguerite Bay on the western Antarctic Peninsula (wAP) shelf were collected as part of the Southern ...

Hyatt, Jason

2006-01-01T23:59:59.000Z

56

Robot Chemist Analyzes Automatically  

Science Journals Connector (OSTI)

Robot Chemist Analyzes Automatically ... Automatic control of a variety of routine analytical procedures is possible with equipment now available from Research Specialties, Richmond, Calif., under the general term "robot chemist." ... The robot chemist is a system of modules which can be connected in many ways to control all steps from measurement of the sample to recording of the data. ...

1960-06-13T23:59:59.000Z

57

Mobile Ice Nucleus Spectrometer  

SciTech Connect (OSTI)

This first year report presents results from a computational fluid dynamics (CFD) study to assess the flow and temperature profiles within the mobile ice nucleus spectrometer.

Kulkarni, Gourihar R.; Kok, G. L.

2012-05-07T23:59:59.000Z

58

Ice age paleotopography  

SciTech Connect (OSTI)

A gravitationally self-consistent theory of postglacial relative sea level change is used to infer the variation of surface ice and water cover since the Last Glacial Maximum (LGM). The results show that LGM ice volume was approximately 35 percent lower than suggested by the CLIMAP reconstruction and the maximum heights of the main Laurentian and Fennoscandian ice complexes are inferred to have been commensurately lower with respect to sea level. Use of these Ice Age boundary conditions in atmospheric general circulation models will yield climates that differ significantly from those previously inferred on the basis of the CLIMAP data set.

Peltier, W.R. (Univ. of Toronto, Ontario (Canada))

1994-07-08T23:59:59.000Z

59

Interaction of low-metamorphic coal components in coking batch  

Science Journals Connector (OSTI)

The interaction of low-metamorphic coal components in coking batch during pyrolysis is studied. The characteristics of the resulting coke are presented, and the partial hydrogenation is...

E. I. Malyi; A. S. Koverya; M. A. Starovoit

2010-08-01T23:59:59.000Z

60

Dynamic Control for Batch Process Systems Using Stochastic Utility Evaluation  

E-Print Network [OSTI]

single turn; 3. once in operation, it is not possible to shut down a furnace, e.g., to take corrective measures; and 4. batching takes approximately 5 to 10 times longer than serial processing. Products can be processed either as a full batch (the... maximum number of products, i.e. the full capacity of the processor) or as a partial batch. The full batch condition poses fewer decision-making problems since management is needed only to determine which product type has priority in processing...

Park, Hongsuk

2012-10-19T23:59:59.000Z

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Clinkering properties of rammed coking coal and coal batches  

Science Journals Connector (OSTI)

The clinkering properties of rammed coking coal and coal batches are investigated. There is a close relation between the clinkering properties and coke quality.

V. M. Shmalko; M. A. Solovev

2009-03-01T23:59:59.000Z

62

Batch Queue Configuration and Policies on Franklin  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Queues and Policies Queues and Policies Queues and Policies Queues and Job Scheduling Jobs must be submitted to a valid Submit Queue. Upon submission the job is routed to the appropriate Torque execution class. Users can not directly access the Torque execution classes. Submit Queue Execution Queue (Do not use in batch script) Nodes Available Processors Max Wallclock Relative Priority (1 being the highest) Run Limit Queued Limit (eligible to run limit) Queue Charge Factor xfer xfer 1 4 6 hrs 3 3 2 1 interactive interactive 1-128 1-512 30 mins 1 1 1 1 debug debug 1-512 1-2,048 30 mins 2 1 1 1 premium premium 1-4,096 1-16,384 24 hrs 4 2 2 2 regular reg_short 1-511 1-2,044 6 hrs 7 12 8 1 reg_small 1-255 1-1,020 48 hrs 7 7 3 1

63

Automatic input rectification  

E-Print Network [OSTI]

We present a novel technique, automatic input rectification, and a prototype implementation, SOAP. SOAP learns a set of constraints characterizing typical inputs that an application is highly likely to process correctly. ...

Long, Fan

64

Automatic Input Rectification  

E-Print Network [OSTI]

We present a novel technique, automatic input rectification, and a prototype implementation called SOAP. SOAP learns a set of constraints characterizing typical inputs that an application is highly likely to process ...

Long, Fan

2011-10-03T23:59:59.000Z

65

Separation of Azeotropic Mixtures in Closed Batch Distillation Arrangements  

E-Print Network [OSTI]

Separation of Azeotropic Mixtures in Closed Batch Distillation Arrangements S. Skouras and S, Norway SCOPE OF THE PROJECT ·How can we separate ternary mixtures in closed batch distillation-up period is required, followed by a heteroazeotropic distillation step (Figure 3) Modified: The separation

Skogestad, Sigurd

66

MULTIVESSEL BATCH DISTILLATION 1 SIGURD SKOGESTAD 2 , BERND WITTGENS,  

E-Print Network [OSTI]

MULTIVESSEL BATCH DISTILLATION 1 SIGURD SKOGESTAD 2 , BERND WITTGENS, EVA S?RENSEN 3 and RAJAB distillation schemes, including the inverted column and the middle vessel column. The total reflux operation of the multivessel batch distillation column was presented recently, and the main contribution of this paper

Skogestad, Sigurd

67

MULTIVESSEL BATCH DISTILLATION 1 SIGURD SKOGESTAD 2 , BERND WITTGENS,  

E-Print Network [OSTI]

MULTIVESSEL BATCH DISTILLATION 1 SIGURD SKOGESTAD 2 , BERND WITTGENS, EVA S RENSEN 3 and RAJAB distillation schemes, including the inverted column and the middle vessel column. The total re ux operation of the multivessel batch distillation column was presented recently, and the main contribution of this paper

Skogestad, Sigurd

68

Fish Smother Under Ice  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Smother Under Ice Smother Under Ice A BULLETIN FOR THE CHICAGO PUBLIC SCHOOLS DESIGNED FOR INCLUSION IN THE WEEKLY ANNOUNCEMENT SENT OUT FROM THE OFFICE OF SUPT. WILLIAM H. JOHNSON Clayton F. Smith, President Roberts Mann, Superintendent of Conservation February 1, 1945 Nature Bulletin No. 1 FOREST PRESERVE NOTES Grown-ups, who used to kive on a farm or in a small town, are fond of talking about the old-fashioned winters "when I was a boy" and the winters that grandpa used to tell about. Well, one would have to go back a long, long time to find a winter as severe as this one. FISH SMOTHER UNDER ICE Lakes and streams breathe the same as living things. When they are covered with ice and snow they cannot get air and they much hold their breath until the ice thaws. While they are holding their breath the oxygen in the water is gradually used up by the living things sealed up in it -- fish, plants "bugs", snails, and hosts of microscopic life. If the ice lasts long enough, these living things die one after another as each kind reaches the point where it cannot stand any further oxygen starvation. Sometimes temporary relief is given by rains and melting snow that bring fresh, serated water under the ice, but no method of artificial respiration has been found that works. Sometimes, too, when water plants get enough sunlight through clear ice they produce small amounts of oxygen and delay the suffocation of the fish, etc.; but when snow and cloudy ice cuts off the light this does not happen.

69

Mining Software Usage with the Automatic Library Tracking Database (ALTD)  

SciTech Connect (OSTI)

Tracking software usage is important for HPC centers, computer vendors, code developers and funding agencies to provide more efficient and targeted software support, and to forecast needs and guide HPC software effort towards the Exascale era. However, accurately tracking software usage on HPC systems has been a challenging task. In this paper, we present a tool called Automatic Library Tracking Database (ALTD) that has been developed and put in production on several Cray systems. The ALTD infrastructure prototype automatically and transparently stores information about libraries linked into an application at compilation time and also the executables launched in a batch job. We will illustrate the usage of libraries, compilers and third party software applications on a system managed by the National Institute for Computational Sciences.

Hadri, Bilel [ORNL; Fahey, Mark R [ORNL

2013-01-01T23:59:59.000Z

70

DIFFRACTION STUDIES OF ICE Alexe BOSAK  

E-Print Network [OSTI]

Ic 28o halo observed at least 7 times since 1629 octahedral particles of ice Ic! #12;Cooling downDIFFRACTION STUDIES OF ICE Alexeï BOSAK European Synchrotron Radiation Facility #12;Ice as the mild threat ice Ih the only ice in the crust #12;Ice as the absolute weapon Ice IX : melting point 45.8°C

Titov, Anatoly

71

The Viscosity of Ice  

Science Journals Connector (OSTI)

11 September 1908 research-article The Viscosity of Ice R. M. Deeley The Royal Society is collaborating with JSTOR to digitize, preserve, and extend access to Proceedings of...

1908-01-01T23:59:59.000Z

72

Radionuclide migration laboratory studies for validation of batch sorption data  

SciTech Connect (OSTI)

Advective and diffusive migration experiments (within the Dynamic Transport Column Experiments and Diffusion Studies of the Yucca Mountain Site Characterization Project) involve utilizing crushed material, intact, and fractured tuff in order to test and improve (if necessary) transport models by experimentally observing the migration of sorbing and non-sorbing radionuclides on a laboratory scale. Performing a validation of the sorption data obtained with batch techniques (within the Batch Sorption Study) is an integral part of the mission of the Dynamic Transport Column Experiments and Diffusion Studies. In this paper the work scope of the radionuclide migration laboratory experiments (as they apply to validation of batch sorption data) is reviewed.

Triay, I.R.; Mitchell, A.J.; Ott, M.A.

1991-12-31T23:59:59.000Z

73

ICE Raids: Compounding Production, Contradiction, and Capitalism  

E-Print Network [OSTI]

America: Factories and ICE Raids Produce Citizens Americansubjects. ICE raids (re)produce workers contradictoryfactories and ICE raids have come to produce immigrant

Reas, Elizabeth I

2009-01-01T23:59:59.000Z

74

E-Print Network 3.0 - activated carbon-sequencing batch Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Information Sciences 58 POTENTIAL ENERGY SAVINGS OF MULTIVESSEL BATCH DISTILLATION Summary: POTENTIAL ENERGY SAVINGS OF MULTIVESSEL BATCH DISTILLATION Bernd Wittgens...

75

Your Unanswered Questions.... Answered - Batch 2 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Your Unanswered Questions.... Answered - Batch 2 Your Unanswered Questions.... Answered - Batch 2 Your Unanswered Questions.... Answered - Batch 2 February 28, 2011 - 2:46pm Addthis Ginny Simmons Ginny Simmons Former Managing Editor for Energy.gov, Office of Public Affairs Last month, Secretary Chu hosted an online town hall to discuss President Obama's clean energy innovation agenda -- and while he was able to answer about 10 questions submitted online during the event, we received more than 200! For the next fews days, we're answering some of the ones Secretary Chu wasn't able to get to that day. Below is our second batch of questions and answers. From John Fahey over Facebook: How can we create a predictable investment environment for the renewable sector? President Obama's proposal to generate 80 percent of electricity from

76

Optimal Distributed Online Prediction using Mini-Batches  

E-Print Network [OSTI]

In this work we present the distributed mini-batch algorithm, a method of converting ...... even when implemented in a high-latency environment, such as a grid. 7.

2011-02-19T23:59:59.000Z

77

Elegest coal in coking batch at OAO EVRAZ ZSMK  

Science Journals Connector (OSTI)

The coking of batch with different proportions of Elegest coal from the Ulug-Khemsk Basin is investigated ... production conditions. The mechanical strength of the coke is improved when such coal is used in the b...

V. L. Osetkovskii; M. M. Naimark; V. G. Lupenko; A. E. Bazegskiy

2013-03-01T23:59:59.000Z

78

Improving the preparation of coal batch for coking  

Science Journals Connector (OSTI)

Various methods of preparing coal for coking are analyzed. Laboratory experiments are conducted with a view to obtaining higher-quality coke from batch with a high content of poorly clinkering coal.

M. S. Chemerinskii; A. G. Starovoit; E. I. Malyi

2012-07-01T23:59:59.000Z

79

Coking of coal batch with different content of oxidized coal  

Science Journals Connector (OSTI)

The use of oxidized coal in coking batch increases the analytical moisture content and ... increases the oxygen content; reduces the gross coke yield and the yield of tar, benzene ... of carbon dioxide, pyrogenet...

D. V. Miroshnichenko; I. D. Drozdnik; Yu. S. Kaftan; N. B. Bidolenko

2012-05-01T23:59:59.000Z

80

Coking theory: Internal stress in the coal batch  

Science Journals Connector (OSTI)

The development of local internal stress in the coal batch is analyzed on the basis of ... theoretical and experimental data. Its influence on coke quality is demonstrated. The influence of mineralized ... large ...

V. I. Sukhorukov

2011-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Ultrafast Biodiesel Production Using Ultrasound in Batch and Continuous Reactors  

Science Journals Connector (OSTI)

Ultrafast Biodiesel Production Using Ultrasound in Batch and Continuous Reactors ... Amongst many resources, availability and cost economy are the major factors affecting the large scale prodn. of the biodiesels. ...

D. C. Boffito; S. Mansi; J.-M. Leveque; C. Pirola; C. L. Bianchi; G. S. Patience

2013-08-23T23:59:59.000Z

82

Ice cream headache  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ice cream headache Ice cream headache Name: fath Status: N/A Age: N/A Location: N/A Country: N/A Date: Around 1993 Question: What causes an "ice cream headache"? Are they dangerous? What would happen if I induced an ice cream headache when I had a regular headache? Replies: This is really a neat question. I am certainly no expert on headaches, but it has a lot to do blood circulation in the sinuses and around and within the brain. Why do some people get them easily and other seem resistant? The cold might restrict blood flow which is the basis for the problem. An Ice cream headache can be turned "on" or "off" by adjusting the rate of consumption, Slurpees work best, so really cold stuff enhances the effect. Are there stages: cold sensation, lingering headache, subsiding headache, warming, etc? Does the cold actually create similar headache "conditions" or does the brain confused cause it cannot directly feel pain? The difference in people is probably due to differences in arteriole branching and general circulation. In my experience smokers get worse headaches than nonsmokers of the same age. Do you find a similar trend? I am trying to stimulate discussion!

83

Ice Heating Up Cold Clouds | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ice Heating Up Cold Clouds Ice Heating Up Cold Clouds In a heated battle, ice crystals win the competition for cloud water vapor The mighty cloud ice crystal appears deceptively...

84

Designing for effective stationkeeping in ice  

E-Print Network [OSTI]

and intervention vessels for Arctic oil and gas. #12;2. An effective Ice Management system · Ice Management for the CIVArctic vessel. - Comparison with the ice model tests carried out in the Aker Arctic ice tank in May 2011

Nørvåg, Kjetil

85

SLUDGE BATCH 7B GLASS VARIABILITY STUDY  

SciTech Connect (OSTI)

The Defense Waste Processing Facility (DWPF) is preparing to initiate processing Sludge Batch 7b (SB7b). In support of the upcoming processing, the Savannah River National Laboratory (SRNL) provided a recommendation to utilize Frits 418 with a 6% Na{sub 2}O addition (26 wt% Na{sub 2}O in sludge) and 702 with a 4% Na{sub 2}O addition (24 wt% Na{sub 2}O in sludge) to process SB7b. This recommendation was based on assessments of the compositional projections for SB7b available at the time from the Savannah River Remediation (SRR). To support qualification of SB7b, SRNL executed a variability study to assess the applicability of the current durability models for SB7b. The durability models were assessed over the expected composition range of SB7b, including potential caustic additions, combined with Frits 702 and 418 over a 32-40% waste loading (WL) range. Thirty four glasses were selected based on Frits 418 and 702 coupled with the sludge projections with an additional 4-6% Na{sub 2}O to reflect the potential caustic addition. Six of these glasses, based on average nominal sludge compositions including the appropriate caustic addition, were developed for both Frit 418 and Frit 702 at 32, 36 and 40% WL to provide coverage in the center of the anticipated SB7b glass region. All glasses were fabricated and characterized using chemical composition analysis, X-ray diffraction (XRD) and the Product Consistency Test (PCT). To comply with the DWPF Glass Product Control Program, a total of thirty four glasses were fabricated to assess the applicability of the current DWPF PCCS durability models. Based on the measured PCT response, all of the glasses were acceptable with respect to the Environmental Assessment (EA) benchmark glass regardless of thermal history. The NL[B] values of the SB7b variability study glasses were less than 1.99 g/L as compared to 16.695 g/L for EA. A small number of the D-optimally selected 'outer layer' extreme vertices (EV) glasses were not predictable using the current Product Composition Control System (PCCS) models for durability, but were acceptable compared to the EA glass when tested. These glasses fell outside of the lower 95% confidence band, which demonstrates conservatism in the model. A few of the glasses fell outside of the upper 95% confidence band; however, these particular glasses have normalized release values that were much lower than the values of EA and should be of no practical concern. Per the requirements of the DWPF Glass Product Control Program, the PCCS durability models have been shown to be applicable to the SB7b sludge system with a range of Na{sub 2}O concentrations blended with Frits 418 or 702. PCT results from the glasses fabricated as part of the variability study were shown to be predictable by the current DWPF PCCS models and/or acceptable with respect to the EA benchmark glass regardless of thermal history or compositional view.

Johnson, F.; Edwards, T.

2011-10-25T23:59:59.000Z

86

Reduction of Hexavalent Chromium in Soil and Ground Water Using Zero-Valent Iron Under Batch and Semi-Batch Conditions  

Science Journals Connector (OSTI)

Chemical remediation of soil and groundwater containing hexavalent chromium (Cr(VI)) was carried out under batch and semi-batch conditions using different iron species: (Fe(II) (sulphate solution); Fe0 ...

Dbora V. Franco; Leonardo M. Da Silva; Wilson F. Jardim

2009-02-01T23:59:59.000Z

87

Molecules, ices and astronomy  

Science Journals Connector (OSTI)

......research-article Features Molecules, ices and astronomy David A Williams, Wendy A Brown, Stephen...brown@ucl.ac.uk Dept of Physics and Astronomy, University College London, Gower Street...of Chemistry, UCL Dept of Physics and Astronomy, UCL Over the past 40 years, about......

D A Williams; W A Brown; S D Price; J M C Rawlings; S Viti

2007-02-01T23:59:59.000Z

88

ice | proceedings Forensic Engineering  

E-Print Network [OSTI]

ice | proceedings Forensic Engineering Volume 165 Issue FE4 November 2012 Forensic Engineering or economic damage. Research and practice papers are sought on traditional or modern forensic engineering, design and construction. Topics covered also include research and education best practice in forensic

Mottram, Toby

89

Evaluation of Sludge Batch 5 Qualification with ISDP Salt Batch 1 Compliance to DWPF Waste Acceptance Criteria  

SciTech Connect (OSTI)

The purpose of this report is to document the acceptability of Sludge Batch 5 with the initial macrobatch operation of the Interim Salt Disposition Project (ISDP) waste to the Defense Waste Processing Facility (DWPF). This report was prepared to comply with the requirements listed in the Waste Acceptance Criteria for Sludge, Actinide Removal Process (ARP), and Modular Caustic Side Solvent Extraction Unit (MCU) Process Transfers to 512-S and DWPF. The requirements for transfers to 512-S were evaluated during ISDP Salt Batch 1 qualification. The calculations of sludge concentrations are based entirely on the Tank 51 sample processed at SRNL. This is conservative because Tank 51 is blended with the dilute feed in the DWPF Feed Tank (Tank 40). This report documents the acceptability of sludge only as well as Sludge Batch 5 sludge slurry combined with ARP/MCU products for feed to DWPF. All criteria were met for unblended Tank 51 material.

Shafer, A.

2010-05-05T23:59:59.000Z

90

Formation of high density amorphous ice by decompression of ice VII and ice VIII at 135 K  

E-Print Network [OSTI]

of ice Ih and are found to have very similar structures. By cooling liquid water along the water trans- forms into ice VIII when cooled . With this in mind Klug et al. were able to produce low densityFormation of high density amorphous ice by decompression of ice VII and ice VIII at 135 K Carl Mc

McBride, Carl

91

Hidden force floating ice  

E-Print Network [OSTI]

Because of the segmental specific-heat disparity of the hydrogen bond (O:H-O) and the Coulomb repulsion between oxygen ions, cooling elongates the O:H-O bond at freezing by stretching its containing angle and shortening the H-O bond with an association of larger O:H elongation, which makes ice less dense than water, allowing it to float.

Chang Q. Sun

2015-01-17T23:59:59.000Z

92

Automatic readout micrometer  

DOE Patents [OSTI]

A measuring system is disclosed for surveying and very accurately positioning objects with respect to a reference line. A principal use of this surveying system is for accurately aligning the electromagnets which direct a particle beam emitted from a particle accelerator. Prior art surveying systems require highly skilled surveyors. Prior art systems include, for example, optical surveying systems which are susceptible to operator reading errors, and celestial navigation-type surveying systems, with their inherent complexities. The present invention provides an automatic readout micrometer which can very accurately measure distances. The invention has a simplicity of operation which practically eliminates the possibilities of operator optical reading error, owning to the elimination of traditional optical alignments for making measurements. The invention has an extendable arm which carries a laser surveying target. The extendable arm can be continuously positioned over its entire length of travel by either a coarse or fine adjustment without having the fine adjustment outrun the coarse adjustment until a reference laser beam is centered on the target as indicated by a digital readout. The length of the micrometer can then be accurately and automatically read by a computer and compared with a standardized set of alignment measurements. Due to its construction, the micrometer eliminates any errors due to temperature changes when the system is operated within a standard operating temperature range.

Lauritzen, Ted (Lafayette, CA)

1982-01-01T23:59:59.000Z

93

Methanesulfonate in the Greenland Ice Sheet Project 2 Ice Core  

E-Print Network [OSTI]

sulfate in the Dye 3 and Camp Century Greenland ice cores infor SO4 2- in the Dye 3, Camp Century, MSA to non-sea salt

Saltzman, E. S; Whung, P.-Y.; Mayewski, P. A

1997-01-01T23:59:59.000Z

94

VSched: Mixing Batch And Interactive Virtual Machines Using  

E-Print Network [OSTI]

the user in direct control of scheduling #12;4 Virtuoso: VM-based Distributed Computing User Orders a raw work · Putting the user in direct control of scheduling #12;12 Periodic Real-time Scheduling ModelVSched: Mixing Batch And Interactive Virtual Machines Using Periodic Real-time Scheduling Bin Lin

Kuzmanovic, Aleksandar

95

List of Accepted Summer Interns (2013) May-June Batch  

E-Print Network [OSTI]

) Dr. Tung-Yuan Ho CBMB Nid** Pash*** (INDIA) Dr. Keng-Hui Lin ESS Pong*** Polsom**** (THAILAND) Dr 14 Interns 12 PIs June-July Batch Program Intern Mentor ESS SOU*** KUM** SAH** (INDIA) Dr. Wu* (MALAYSIA) Ko** Yeo** Kha* (MALAYSIA) Dr. Yun-Ru Ruby Chen ESS Yu** Cél** Kita**** (JAPAN) Dr. Danie Mao

96

CATALYST ENHANCED MICRO SCALE BATCHCATALYST ENHANCED MICRO SCALE BATCH ASSEMBLYASSEMBLY  

E-Print Network [OSTI]

CATALYST ENHANCED MICRO SCALE BATCHCATALYST ENHANCED MICRO SCALE BATCH ASSEMBLYASSEMBLY RajashreeCollection/Analysis Capabilities · Parts (800x800x50µmParts (800x800x50µm33 ) and catalysts (2x2x.5mm) and catalysts (2x2x.5mm33 non-participating millimeter scale parts that act as `catalysts'. We present experimental results

97

MULTIVESSEL BATCH DISTILLATION 1 SIGURD SKOGESTAD 2 , BERND WITTGENS,  

E-Print Network [OSTI]

MULTIVESSEL BATCH DISTILLATION 1 SIGURD SKOGESTAD 2 , BERND WITTGENS, EVA S RENSEN 3 and RAJAB distillation schemes. A simple feedback control strategy for the total re ux operation of a multivessel column distillation generally is less energy e cient than continuous distillation, it has received increased attention

Skogestad, Sigurd

98

MULTIVESSEL BATCH DISTILLATION 1 SIGURD SKOGESTAD 2 , BERND WITTGENS,  

E-Print Network [OSTI]

MULTIVESSEL BATCH DISTILLATION 1 SIGURD SKOGESTAD 2 , BERND WITTGENS, EVA S?RENSEN 3 and RAJAB distillation schemes. A simple feedback control strategy for the total reflux operation of a multivessel column distillation generally is less energy efficient than continuous distillation, it has received increased

Skogestad, Sigurd

99

Dynamic Control of Serial-batch Processing Systems  

E-Print Network [OSTI]

................................................................ 8 1.4 Organization of the dissertation .......................................................... 9 II LITERATURE REVIEW ............................................................................... 11 2.1 Batch process control... .......................................................................................... 31 3.2 Problem definition and notation ........................................................... 33 3.3 Next arrival re-sequencing based control heuristic (NARCH) ............ 35 3.4 Simulation study...

Cerekci, Abdullah

2010-01-14T23:59:59.000Z

100

Analysis of Closed Multivessel Batch Distillation of Ternary Azeotropic Mixtures  

E-Print Network [OSTI]

Analysis of Closed Multivessel Batch Distillation of Ternary Azeotropic Mixtures using Elementary ­ Introducing the concept of elementary topological cells, we illustrate how vapor­liquid equilibrium (VLE with total reflux packed distillation column profiles when all resistance to mass transfer is in the vapor

Skogestad, Sigurd

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

HIGH LEVEL WASTE SLUDGE BATCH 4 VARIABILITY STUDY  

SciTech Connect (OSTI)

The Defense Waste Processing Facility (DWPF) is preparing for vitrification of High Level Waste (HLW) Sludge Batch 4 (SB4) in early FY2007. To support this process, the Savannah River National Laboratory (SRNL) has provided a recommendation to utilize Frit 503 for vitrifying this sludge batch, based on the composition projection provided by the Liquid Waste Organization on June 22, 2006. Frit 418 was also recommended for possible use during the transition from SB3 to SB4. A critical step in the SB4 qualification process is to demonstrate the applicability of the durability models, which are used as part of the DWPF's process control strategy, to the glass system of interest via a variability study. A variability study is an experimentally-driven assessment of the predictability and acceptability of the quality of the vitrified waste product that is anticipated from the processing of a sludge batch. At the DWPF, the durability of the vitrified waste product is not directly measured. Instead, the durability is predicted using a set of models that relate the Product Consistency Test (PCT) response of a glass to the chemical composition of that glass. In addition, a glass sample is taken during the processing of that sludge batch, the sample is transmitted to SRNL, and the durability is measured to confirm acceptance. The objective of a variability study is to demonstrate that these models are applicable to the glass composition region anticipated during the processing of the sludge batch - in this case the Frit 503 - SB4 compositional region. The success of this demonstration allows the DWPF to confidently rely on the predictions of the durability/composition models as they are used in the control of the DWPF process.

Fox, K; Tommy Edwards, T; David Peeler, D; David Best, D; Irene Reamer, I; Phyllis Workman, P

2006-10-02T23:59:59.000Z

102

Automatic Control Laboratory ETH, Zurich  

E-Print Network [OSTI]

Automatic Control Laboratory ETH, Z¨urich Physikstrasse 3 8092 Z¨urich, Switzerland +41 44 632 22 from the airport to Z¨urich city and goes directly past ETH. There are ticket machines outside 71 How to get to the Automatic Control Laboratory (IfA) From the Z¨urich airport: · By Taxi. Taxi

Lygeros, John

103

Experimental results of a household automatic icemaker in a refrigerator/freezer  

SciTech Connect (OSTI)

This paper describes the performance test results of an automatic icemaker refrigerator under various modes of icemaker operation. The tests were conducted on a 20-ft{sup 3} (0.566-m{sup 3}) household refrigerator that had a single forced convection evaporator and was charged with R-12. The focus of the research was to ascertain the effect of icemaker operation on the refrigerator`s daily energy consumption. Thus, three different types of tests were conducted, depending upon the icemaker`s operating mode. In the first test type, the baseline, the automatic icemaker was turned off and no ice was made. In the second test type, the ice-making mode (test A), the icemaker was turned on and ice was continuously made. Compared to the baseline, additional power was intermittently consumed by a mold heater that melts the ice cubes` interface with the tray, a solenoid valve that supplies water to the icemaker tray, and a motor that rotates the ejector blades to press the crescent-shaped ice cubes out of the mold and unload them into an ice bin. In the third test type, the failure mode (test B), the water supply was manually disconnected but the icemaker was left turned on. Even though no ice was made, additional power was still consumed by the mold heater, the solenoid valve, and the motorized ejector. In tests A and B, the energy consumed by the icemaker`s components increases the cooling load, which raises the compressor power consumption. The present study shows that at the AHAM-specified test conditions, uninterrupted icemaking increased the daily energy consumption by 22.5% to 27.2%.

Haider, I.; Feng, H.; Radermacher, R. [Univ. of Maryland, College Park, MD (United States). Center for Environmental Energy Engineering

1996-12-31T23:59:59.000Z

104

Fire and Ice Issue 9  

E-Print Network [OSTI]

s FIRE AND ICE # 9 IB FIRE ICE #9 A Blake/Avon slash fanzine r Available from: Kathleen Resch POBox 1766 Temple City, CA 91780 Kathleener@aol.com FIRE AND ICE # 9copyright May, 2005 by Kathleen Resch for the contributors. No reprints... or reproduction without the written permission ofthe author/artist This is an amateur publication and is not p intended to infringe upon the rights ofany holders of"Blake's 7" copyrights. FIRE AND ICE 9 TABLE OF CONTENTS LEAVING ROOM 101 by Nova 2 TOO MANY...

Multiple Contributors

2005-01-01T23:59:59.000Z

105

ARM - Lesson Plans: When Land Ice Melts  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ice melts? Do you think melting glaciers and other land-based ice masses will make sea level rise? Will it submerge the continents on which the ice used to be? Most of the...

106

Therapeutic Hypothermia: Protective Cooling Using Medical Ice...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Therapeutic Hypothermia: Protective Cooling Using Medical Ice Slurry Technology available for licensing: Proprietary method and equipment for making an ice slurry coolant to induce...

107

Modelling and optimisation of batch distillation involving esterification and hydrolysis reaction systems. Modelling and optimisation of conventional and unconventional batch distillation process: Application to esterification of methanol and ethanol using acetic acid and hydrolysis of methyl lactate system.  

E-Print Network [OSTI]

??Batch distillation with chemical reaction when takes place in the same unit is referred to as batch reactive distillation process. The combination reduces the capital (more)

Edreder, Elmahboub A.

2010-01-01T23:59:59.000Z

108

MULTIVESSEL BATCH DISTILLATION SIGURD SKOGESTAD 1 , BERND WITTGENS, EVA S RENSEN 2  

E-Print Network [OSTI]

MULTIVESSEL BATCH DISTILLATION SIGURD SKOGESTAD 1 , BERND WITTGENS, EVA S RENSEN 2 and RAJAB LITTO column presented in this paper provides a generalization of previously proposed batch distillation schemes. The economic potential of the multivessel batch distillation under total re ux is demon- strated

Skogestad, Sigurd

109

Experimental and Theoretical Studies on the Start-Up Operation of a Multivessel Batch Distillation Column  

E-Print Network [OSTI]

Experimental and Theoretical Studies on the Start-Up Operation of a Multivessel Batch DistillationVersity of Science and Technology, Trondheim, Norway Multivessel batch distillation is a promising alternative to conventional batch distillation. Earlier studies proved the feasibility of temperature control in a closed

Skogestad, Sigurd

110

MULTIVESSEL BATCH DISTILLATION -EXPERIMENTAL VERIFICATION Bernd Wittgens and Sigurd Skogestad1  

E-Print Network [OSTI]

MULTIVESSEL BATCH DISTILLATION -EXPERIMENTAL VERIFICATION Bernd Wittgens and Sigurd Skogestad1 The experimental veri cation of the operation of a multivessel batch distillation column, operated under total re vessels, provides a generalization of previously proposed batch distillation schemes. We propose a simple

Skogestad, Sigurd

111

MULTIVESSEL BATCH DISTILLATION SIGURD SKOGESTAD 1 , BERND WITTGENS, EVA SRENSEN 2  

E-Print Network [OSTI]

MULTIVESSEL BATCH DISTILLATION SIGURD SKOGESTAD 1 , BERND WITTGENS, EVA S?RENSEN 2 and RAJAB LITTO column presented in this paper provides a generalization of previously proposed batch distillation schemes. The economic potential of the multivessel batch distillation under total reflux is demon­ strated

Skogestad, Sigurd

112

On the Dynamics of Batch Distillation : A Study of Parametric Sensitivity in Ideal  

E-Print Network [OSTI]

On the Dynamics of Batch Distillation : A Study of Parametric Sensitivity in Ideal Binary Columns sensitivity in batch distillation processes. By considering the effect of small changes in the operating #12; 1 Introduction Batch distillation has become of increasing importance in industry during the last

Skogestad, Sigurd

113

A Conceptual Model for Production Leveling (Heijunka) Implementation in Batch Production Systems  

E-Print Network [OSTI]

A Conceptual Model for Production Leveling (Heijunka) Implementation in Batch Production Systems for batch production system. The main structure of this model is grounded on three constructs: traditional developed for batch production systems. Then, case study guidelines were applied to define an appropriate

Paris-Sud XI, Université de

114

Rapid Batch Characterization of Coal Utilization By-Products  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Batch Characterization Batch Characterization of Coal Utilization By-Products Peter A. Hesbach 1 *, Alexander S. P. Abel 2 Ann G. Kim 3 , and Steven C. Lamey 4 1 U.S. Department of Energy, National Energy Technology Laboratory, 3610 Collins Ferry Road, P.O. Box 880, Morgantown, WV 26507-0880 USA; 2 NETL Site Support Contractor, Parsons, 3610 Collins Ferry Road, Morgantown, WV 26505 USA; 3 U.S. Department of Energy, National Energy Technology Laboratory Post-Doctoral Fellow, 626 Cochrans Mill Road, P.O. Box 10940, Pittsburgh, PA 15236-0940 USA; 4 retired, U.S. Department of Energy, National Energy Technology Laboratory, Morgantown, WV USA (* author for correspondence, phone: 304-285-4443, fax: 304-285-4487, e-mail: peter.hesbach@netl.doe.gov) KEYWORDS: leaching methods, ash characterization, coal utilization by-products

115

ARM - Measurement - Cloud ice particle  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ice particle ice particle ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Cloud ice particle Particles made of ice found in clouds. Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments MET : Surface Meteorological Instrumentation Field Campaign Instruments REPLICATOR : Balloon-borne Ice Crystal Replicator CPI : Cloud Particle Imager CVI-AIR : Counterflow Virtual Impactor LEARJET : Lear Jet PARTIMG : Particle imager UAV-PROTEUS-MICRO : Proteus Cloud Microphysics Instruments

116

Clothes Dryer Automatic Termination Evaluation  

SciTech Connect (OSTI)

Volume 2: Improved Sensor and Control Designs Many residential clothes dryers on the market today provide automatic cycles that are intended to stop when the clothes are dry, as determined by the final remaining moisture content (RMC). However, testing of automatic termination cycles has shown that many dryers are susceptible to over-drying of loads, leading to excess energy consumption. In particular, tests performed using the DOE Test Procedure in Appendix D2 of 10 CFR 430 subpart B have shown that as much as 62% of the energy used in a cycle may be from over-drying. Volume 1 of this report shows an average of 20% excess energy from over-drying when running automatic cycles with various load compositions and dryer settings. Consequently, improving automatic termination sensors and algorithms has the potential for substantial energy savings in the U.S.

TeGrotenhuis, Ward E.

2014-10-01T23:59:59.000Z

117

Ice deformation near SHEBA R. W. Lindsay  

E-Print Network [OSTI]

in the vicinity of the Surface Heat Budget of the Arctic Ocean (SHEBA) ice camp that is suitable for forcing factor for regional heat fluxes, ice growth and melt rates, and ice strength [Maykut, 1982Ice deformation near SHEBA R. W. Lindsay Polar Science Center, University of Washington, Seattle

Lindsay, Ron

118

Comment on ``A quantitative framework for interpretation of basal ice facies formed by ice  

E-Print Network [OSTI]

heave would be expected to produce were revealed beneath the Kamb Ice Stream by the pioneering boreholeComment on ``A quantitative framework for interpretation of basal ice facies formed by ice quantitative framework for interpretation of basal ice facies formed by ice accretion over subglacial sediment

Worster, M. Grae

119

Ice coring on Vestfonna Ice Cap Contact person: John Moore (jmoore@ulapland.fi).  

E-Print Network [OSTI]

reach bedrock about 4 tons of ice will need to be flown out to Longyearbyen in insulated boxesIce coring on Vestfonna Ice Cap Contact person: John Moore (jmoore@ulapland.fi). Participants, Polish Academy of Science glowacki@igf.edu.pl Science: Ice cores from the glaciers outside the main ice

Moore, John

120

ORIGINAL PAPER A bacterial ice-binding protein from the Vostok ice core  

E-Print Network [OSTI]

to produce a 54 kDa ice-binding protein (GenBank EU694412) that is similar to ice-binding proteins previously- vival at sub-zero temperatures by producing proteins that bind to and inhibit the growth of ice crystalsORIGINAL PAPER A bacterial ice-binding protein from the Vostok ice core James A. Raymond ? Brent C

Christner, Brent C.

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

The Effects of Rotation and Ice Shelf Topography on Frazil-Laden Ice Shelf Water Plumes  

E-Print Network [OSTI]

, Antarctica. In addition, it is found that the model only produces reasonable marine ice formation rates whenThe Effects of Rotation and Ice Shelf Topography on Frazil-Laden Ice Shelf Water Plumes PAUL R of the dynamics and thermodynamics of a plume of meltwater at the base of an ice shelf is presented. Such ice

Feltham, Daniel

122

IceCube Collaboration Governance Document IceCube Collaboration Governance Document  

E-Print Network [OSTI]

IceCube Collaboration Governance Document IceCube Collaboration Governance Document Revision 8.1, November 21, 2014 Page 1 of 20 #12;IceCube Collaboration Governance Document IceCube Collaboration Governance Document Revision 8.1, November 21, 2014 Collaboration Objectives The IceCube Collaboration (the

Saffman, Mark

123

Climatic Ice Core Records from the Tropical Quelccaya Ice Cap  

Science Journals Connector (OSTI)

...DANSGAARD, W, LATE CENOZOIC GLACIA 37 ( 1971 ). DANSGAARD, W, ONE THOUSAND CENTURIES OF CLIMATIC RECORD FROM CAMP CENTURY ON GREENLAND ICE SHEET, SCIENCE 166 : 377 ( 1969 ). DANSGAARD, W, STABLE ISOTOPES IN PRECIPITATION, TELLUS 16...

LONNIE G. THOMPSON; STEFAN HASTENRATH; BENJAMN MORALES ARNAO

1979-03-23T23:59:59.000Z

124

Fire and Ice Issue 2  

E-Print Network [OSTI]

. fipl cpn r FLASHPOINT A flame that can't be seen, cloaked in black and silver and disdain, born of anger and of love no longer dared. An ice-encrusted soul, dormant in the aftermath of accusations piled like snow against the heated passions of a man who...^ $$% i&l /P^ \\0 rffej FIRE AND ICE AVAILABLE FROM Kathleen Resch PO Box 1766 Temple City, CA 91780 FIRE AND ICE II TABLE OF CONTENTS COVER by Phoenix FRONTISPIECE by Gayle Feyrer "Flashpoint" by Rachel Duncan 1 PEDESTAL by Thomas 2 "A Damn Fine...

Multiple Contributors

1993-01-01T23:59:59.000Z

125

Fire and Ice Issue 7  

E-Print Network [OSTI]

       ' FIRE and ICE # 7 -p! jP) FIRE AND ICE VII Available from: Kathleen Resch PO Box 1766 Temple City, CA 91780 Kathleener@aol.com May 2002by Kathleen Reschfor the contributors. No reprints or reproduction without the written... permission of the author/artist. Thisis an amateur publication and is not in tended to infringe upon the rights ofTerryNation, BBC-TV or any others. i - J FIRE AND ICE VI Table of Contents HALF A LOAF by Linda Norman 1 GROUNDHOG LAY by Predatrlx 5 PLAYTIME...

Multiple Contributors

2002-01-01T23:59:59.000Z

126

Ice mechanics and risks to offshore structures  

SciTech Connect (OSTI)

This volume brings together the results of all salient research development in ice engineering, from smaller scale to full size tests on ice strength and ice mechanics which is essential criteria for the design of safe, cost effective structures. Much of the data has been released from confidential industry files and thus allows, for the first time, a full appraisal of the subject. Contents include - Types and Distribution of Ice, Mechanical Properties, Measurements of Ice-Structure Interaction, and Analysis of Ice Failure and Design Ice Loads. This work is completed with a full literary review and subject index.

Sanderson, T.J.O.

1988-01-01T23:59:59.000Z

127

Identifying Software Usage at HPC Centers with the Automatic Library Tracking Database  

SciTech Connect (OSTI)

A library tracking database has been developed to monitor software/library usage. This Automatic Library Tracking Database (ALTD) automatically and transparently stores, into a database, information about the libraries linked into an application at compilation time and also the executables launched in a batch job. Information gathered into the database can then be mined to provide reports. Analyzing the results from the data collected will help to identify, for example, the most frequently used and the least used libraries and codes, and those users that are using deprecated libraries or applications. We will illustrate the usage of libraries and executables on the Cray XT platforms hosted at the National Institute for Computational Sciences and the Oak Ridge Leadership Computing Facility (both located at Oak Ridge National Laboratory).

Hadri, Bilel [ORNL; Fahey, Mark R [ORNL; Jones, Nicholas A [ORNL

2010-01-01T23:59:59.000Z

128

JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 10, NO. 1, MARCH 2001 25 Batch Transfer of LIGA Microstructures by Selective  

E-Print Network [OSTI]

and Abformung (LIGA), LIGA-like, and micro electrical discharge machining (EDM) processes, batch transfer

Lin, Liwei

129

An experimental and theoretical study of the ice accretion process during artificial and natural icing conditions  

E-Print Network [OSTI]

Real-time measurements of ice growth during artificial and natural icing conditions were conducted using an ultrasonic pulse-echo technique. This technique allows ice thickness to be measured with an accuracy of ?0.5 mm; ...

Kirby, Mark Samuel

1986-01-01T23:59:59.000Z

130

Automatic Library Tracking Database Infrastructure  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Libraries » ALTD Libraries » ALTD ALTD Automatic Library Tracking Database Infrastructure To track and monitor library usage and better serve your software needs, we have enabled the Automatic Library Tracking Database (ALTD) on our prodcution systems, Hopper and Edison. ALTD is also availailable on Carver, but has not enabled for all users by default yet. ALTD, developed by National Institute for Computational Sciences, automatically and transparently tracks all libraries linked into an application at compile time, as well as the libraries used at run time, by intercepting the linker (ld) and the job launcher (aprun, or mpirun). It is a light-weight tool, and should not change your experience with compilation and execution of codes on the machine. However, if you encounter any problems due to ALTD,

131

Automatic rapid attachable warhead section  

DOE Patents [OSTI]

Disclosed are a method and apparatus for (1) automatically selecting warheads or reentry vehicles from a storage area containing a plurality of types of warheads or reentry vehicles, (2) automatically selecting weapon carriers from a storage area containing at least one type of weapon carrier, (3) manipulating and aligning the selected warheads or reentry vehicles and weapon carriers, and (4) automatically coupling the warheads or reentry vehicles with the weapon carriers such that coupling of improperly selected warheads or reentry vehicles with weapon carriers is inhibited. Such inhibition enhances safety of operations and is achieved by a number of means including computer control of the process of selection and coupling and use of connectorless interfaces capable of assuring that improperly selected items will be rejected or rendered inoperable prior to coupling. Also disclosed are a method and apparatus wherein the stated principles pertaining to selection, coupling and inhibition are extended to apply to any item-to-be-carried and any carrying assembly.

Trennel, Anthony J. (Albuquerque, NM)

1994-05-10T23:59:59.000Z

132

A New Completion Time Algorithm Considering an Out-of-Phase Policy in Batch Processes  

Science Journals Connector (OSTI)

A New Completion Time Algorithm Considering an Out-of-Phase Policy in Batch Processes ... Product has index i, with campaign g and stage j. ...

Jun-Hyung Ryu; In-Beum Lee

1997-12-01T23:59:59.000Z

133

Mantle viscosity and ice-age ice sheet topography  

SciTech Connect (OSTI)

Ice-age paleotopography and mantle viscosity can both be inferred from observations of Earth`s response to the most recent deglaciation event of the current ice age. This procedure requires iterative application of a theoretical model of the global process of glacial isostatic adjustment. Results demonstrate that the iterative inversion procedure converges to a paleotopography that is extremely close to that from the ICE-4G model. The accompanying mantle viscosity profile is furthermore shown to reconcile the requirements of aspherical geoid anomalies related to the mantle convection process, thus resolving a fundamental issue concerning mantle rheology. The combined model also explains postglacial sea level histories for the east cost of the United States. 28 refs., 9 figs.

Peltier, W.R. [Univ. of Toronto, Ontario (Canada)

1996-09-06T23:59:59.000Z

134

Automatic Voltage Control of Electrical Systems  

Science Journals Connector (OSTI)

... to have complete automatic voltage regulation and it also has supervisory control for its main substations. By a careful application of automatically controlled regulators it is shown that the voltage ...

1934-01-20T23:59:59.000Z

135

Ice Energy | Open Energy Information  

Open Energy Info (EERE)

Ice Energy Ice Energy Jump to: navigation, search Logo: Ice Energy Name Ice Energy Address 9351 Eastman Park Drive Place Windsor, Colorado Zip 80550 Sector Renewable energy Product Energy Storage Year founded 2003 Number of employees 51-200 Phone number 970-545-3630 Website http://www.ice-energy.com/ Coordinates 40.4651775°, -104.882° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.4651775,"lon":-104.882,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

136

Physical Controls on Ice Variability in the Bering Sea /  

E-Print Network [OSTI]

region. The model also produces less ice near much of thewinds (Figure 3.13c,d) produce more ice growth and more iceThe model produces variations in total ice area anomalies

Li, Linghan

2013-01-01T23:59:59.000Z

137

FLOWSHEET FOR ALUMINUM REMOVAL FROM SLUDGE BATCH 6  

SciTech Connect (OSTI)

Samples of Tank 12 sludge slurry show a substantially larger fraction of aluminum than originally identified in sludge batch planning. The Liquid Waste Organization (LWO) plans to formulate Sludge Batch 6 (SB6) with about one half of the sludge slurry in Tank 12 and one half of the sludge slurry in Tank 4. LWO identified aluminum dissolution as a method to mitigate the effect of having about 50% more solids in High Level Waste (HLW) sludge than previously planned. Previous aluminum dissolution performed in a HLW tank in 1982 was performed at approximately 85 C for 5 days and dissolved nearly 80% of the aluminum in the sludge slurry. In 2008, LWO successfully dissolved 64% of the aluminum at approximately 60 C in 46 days with minimal tank modifications and using only slurry pumps as a heat source. This report establishes the technical basis and flowsheet for performing an aluminum removal process in Tank 51 for SB6 that incorporates the lessons learned from previous aluminum dissolution evolutions. For SB6, aluminum dissolution process temperature will be held at a minimum of 65 C for at least 24 days, but as long as practical or until as much as 80% of the aluminum is dissolved. As planned, an aluminum removal process can reduce the aluminum in SB6 from about 84,500 kg to as little as 17,900 kg with a corresponding reduction of total insoluble solids in the batch from 246,000 kg to 131,000 kg. The extent of the reduction may be limited by the time available to maintain Tank 51 at dissolution temperature. The range of dissolution in four weeks based on the known variability in dissolution kinetics can range from 44 to more than 80%. At 44% of the aluminum dissolved, the mass reduction is approximately 1/2 of the mass noted above, i.e., 33,300 kg of aluminum instead of 66,600 kg. Planning to reach 80% of the aluminum dissolved should allow a maximum of 81 days for dissolution and reduce the allowance if test data shows faster kinetics. 47,800 kg of the dissolved aluminum will be stored in Tank 8 and 21,000 kg will be stored in saltcake via evaporation. Up to 77% of the total aluminum planned for SB6 may be removed via aluminum dissolution. Storage of the aluminum-laden supernate in Tank 8 will require routine evaluation of the free hydroxide concentration in order to maintain aluminum in solution. Periodic evaluation will be established on concurrent frequency with corrosion program samples as previously established for aluminum-laden supernate from SB5 that is stored in Tank 11.

Pike, J; Jeffrey Gillam, J

2008-12-17T23:59:59.000Z

138

ICE Solar | Open Energy Information  

Open Energy Info (EERE)

ICE Solar ICE Solar Jump to: navigation, search Name ICE Solar Place Hyderabad, Andhra Pradesh, India Sector Solar Product India-based company focused on solar PV engineering, procurement and construction opportunities. Coordinates 17.6726°, 77.5971° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":17.6726,"lon":77.5971,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

139

Anaerobic batch co-digestion of Spartina alterniflora and potato  

Science Journals Connector (OSTI)

The potential of mesophilic anaerobic batch digestion for the treatment of Spartina alterniflora, an invasive species widely distributed along Chinese coastlines, through co-digestion with readily biodegradable organics has been assessed. The accumulative biogas yield from S. alterniflora alone was 251 ml/g Total Solid (TS) (at 35C), at TS of 6%, co-digestion with 80% of S. alterniflora and 20% of potato representing 6% of TS, gave a biogas yield of 383 ml/g TS (at 35C). This is an increase of 52.5% compared with that obtained from digestion of pure S. alterniflora. In conclusion, using readily biodegradable potato as co-substrate of S. alterniflora can increase its anaerobic digestibility and biogas yield.

Jihong Li; Shiguan Yang; Zheng Zheng; Huamin Song; Zhuo Meng

2011-01-01T23:59:59.000Z

140

Optimal Reliable Retrofit Design of Multiproduct Batch Plants  

Science Journals Connector (OSTI)

The problem of the retrofit design of a multiproduct batch plant arises, for example, when new production targets and market selling prices are specified for one or more products or when there is a need to improve the overall effectiveness of the existing plant by improving its reliability and maintainability characteristics. ... Given (i) a new production target, selling price, unit cycle times, and size factors for each product; (ii) the existing plant configuration, including the size, cost, reliability, and maintainability data for existing units; and (iii) the number, size, reliability, and maintenance characteristics and costs of new equipment available, determine (i) the net expected profit and the revised plant configuration, (ii) the method of grouping parallel units and various processing parameters for each production campaign, and (iii) the optimal inherent availability for selected new equipment. ... Moreover, they express their deep appreciation for the stimulating mix of wit, insight, and creativity that Art always brought to Delft. ...

Harish D. Goel; Margot P. C. Weijnen; Johan Grievink

2004-03-19T23:59:59.000Z

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Thermal Storage with Ice Harvesting Systems  

E-Print Network [OSTI]

Application of Harvesting Ice Storage Systems. Thermal storage systems are becoming widely accepted techniques for utility load management. This paper discusses the principles of ice harvesting equipment and their application to the multi...

Knebel, D. E.

1986-01-01T23:59:59.000Z

142

Waste-heat recovery in batch processes using heat storage  

SciTech Connect (OSTI)

The waste-heat recovery in batch processes has been studied using the pinch-point method. The aim of the work has been to investigate theoretical and practical approaches to the design of heat-exchanger networks, including heat storage, for waste-heat recovery in batch processes. The study is limited to the incorporation of energy-storage systems based on fixed-temperature variable-mass stores. The background for preferring this to the alternatives (variable-temperature fixed-mass and constant-mass constant-temperature (latent-heat) stores) is given. It is shown that the maximum energy-saving targets as calculated by the pinch-point method (time average model, TAM) can be achieved by locating energy stores at either end of each process stream. This theoretically large number of heat-storage tanks (twice the number of process streams) can be reduced to just a few tanks. A simple procedure for determining a number of heat-storage tanks sufficient to achieve the maximum energy-saving targets as calculated by the pinch-point method is described. This procedure relies on combinatorial considerations, and could therefore be labeled the combinatorial method for incorporation of heat storage in heat-exchanger networks. Qualitative arguments justifying the procedure are presented. For simple systems, waste-heat recovery systems with only three heat-storage temperatures (a hot storage, a cold storage, and a heat store at the pinch temperature) often can achieve the maximum energy-saving targets. Through case studies, six of which are presented, it is found that a theoretically large number of heat-storage tanks (twice the number of process streams) can be reduced to just a few tanks. The description of these six cases is intended to be sufficiently detailed to serve as benchmark cases for development of alternative methods.

Stoltze, S.; Mikkelsen, J.; Lorentzen, B.; Petersen, P.M.; Qvale, B. [Technical Univ. of Denmark, Lyngby (Denmark). Lab. for Energetics

1995-06-01T23:59:59.000Z

143

LABORATORY INDENTATION TESTS SIMULATING ICE-STRUCTURE INTERACTIONS USING CONE-SHAPED ICE  

E-Print Network [OSTI]

sample protruding from a steel retaining ring (Figure 1). The closing speed and penetration rate test scenario were ice sample type, ice temperature, interaction rate, penetration depth, cone angle cone angle, indentation rate, ice type and temperature, and indenter roughness were varied. All ice

Bruneau, Steve

144

Sea ice control of water isotope transport to Antarctica and implications for ice core interpretation  

E-Print Network [OSTI]

associated with diabatic heating. The interior deuterium excess response is more strongly affected by sea ice ice and the local conditions may have remote influences [Jacobs and Comiso, 1997; StammerjohnSea ice control of water isotope transport to Antarctica and implications for ice core

Noone, David

145

New study details glacier ice loss following ice shelf July 25, 2011  

E-Print Network [OSTI]

and Ted #12;Scambos of the NSIDC produced detailed ice loss maps from 2001 to 2009 for the main tributaryNew study details glacier ice loss following ice shelf collapse July 25, 2011 Contact: Anthony Lane UMBC (410) 455-5793 alane@umbc.edu Katherine Leitzell National Snow and Ice Data Center University

Cambridge, University of

146

Numerical Age Computation of the Antarctic Ice Sheet for Dating Deep Ice Cores  

E-Print Network [OSTI]

Numerical Age Computation of the Antarctic Ice Sheet for Dating Deep Ice Cores Bernd M¨ugge1 for the computation of the age of ice is discussed within the frame of numerical ice sheet modelling. The first method of a numerical diffusion term to stabilize the solution and therefore produces arbitrary results in a near

Calov, Reinhard

147

Gas isotopes in ice reveal a vegetated central Greenland during ice sheet invasion  

E-Print Network [OSTI]

= ) in the silty ice, reaching values as high as 22 mM [Tison et al., 1998]. Ammonium oxalate is produced duringGas isotopes in ice reveal a vegetated central Greenland during ice sheet invasion R. Souchez,1 J prevailing during build-up of the Greenland Ice Sheet (GIS) are not yet established. Here we use results from

Chappellaz, Jérôme

148

AMSR-E Algorithm Theoretical Basis Document: Sea Ice Products  

E-Print Network [OSTI]

the Arctic perennial ice regions, and the ice temperature is produced from an algorithm similar to the Nimbus1 AMSR-E Algorithm Theoretical Basis Document: Sea Ice Products Thorsten Markus and Donald J 20771 1. Overview The AMSR-E sea ice standard level 3 products include sea ice concentration, sea ice

Waliser, Duane E.

149

Fire and Ice Issue 6  

E-Print Network [OSTI]

9#HDIQNV3>IM ".: FIRE AND ICE VI Available from: Kathleen Resch PO Box 1766 Temple City, CA 91780 October, 2000 by Kathleen Resch for the contributors. No reprints or reproduction without the written permission of the author.../artist. This is an amateur publication and is not intended to infringe upon the rights ofTerry Nation, BBC-TV or any others. FIRE AND ICE VI 1 Table of Contents A DANGEROUS CONCEPT by Nova 1 A FRIEND IN NEED... by Julia Stamford 14 ...IS A FRIEND INDEED by Julia Stamford 19...

Multiple Contributors

2000-01-01T23:59:59.000Z

150

Fire and Ice Issue 3  

E-Print Network [OSTI]

,fpl ^1 FIRE AND ICE Available from: Kathleen Resch PO Box 1766 Temple City,CA 91780 III May, 1995 by Kathleen Resch for the contributors. No reprints or reproduction without the written permission of the author/artist. This is an amateur... publication and is not intended to infringe upon the rightsof "Blake's 7" copyright holders.. FIRE AND ICE TABLE OF CONTENTS THE GIFT by Pat Terra 1 "innerspace" by Pat Terra 24 WILD, BEAUTIFUL AND DAMNED by Gemini 25 SET THE NIGHT ON FIRE by Riley Cannon 40...

Multiple Contributors

1995-01-01T23:59:59.000Z

151

Paleotopography of glacial-age ice sheets  

SciTech Connect (OSTI)

This is technical comment and response to the subject of paleotophography of glacial age ice sheets. The model presented by Peltier reconstructing the paleotopography of glacial age ice sheets has implications for atmospheric general circulation models of ice age climate. In addition, the model suggests that the glacial-age Antarctic Ice Sheet was significantly larger than today`s. The commentor, Edwards, suggests there is a discrepancy between data from Papua New Guinea and the model results.

Edwards, R.L. [Univ. of Minnesota, Minneapolis, MN (United States)

1995-01-27T23:59:59.000Z

152

Coherent radar ice thickness measurements over the Greenland ice sheet  

E-Print Network [OSTI]

systems are designed to use pulse compression techniques and coherent integration to obtain the high sensitivity required to measure the thickness of more than 4 km of cold ice. We used these systems to collect radar data over the interior and margins...

Gogineni, S. Prasad; Tammana, Dilip; Braaten, David A.; Leuschen, C.; Legarsky, J.; Kanagaratnam, P.; Stiles, J.; Allen, C.; Jezek, K.; Akins, T.

2001-12-27T23:59:59.000Z

153

Ice-Sheet Response to Oceanic Forcing  

Science Journals Connector (OSTI)

...regional-scale ice-ocean simulations suggests that the state-of-Texas...ice shelfs rapid demise, which would...providing accurate simulation and projection of...observation and modeling indicate that increases...day (38, 39). Rapid melting of ice cliffs...with an emphasis on automated and smart-sensing...

Ian Joughin; Richard B. Alley; David M. Holland

2012-11-30T23:59:59.000Z

154

The Architectural Implications of Pipeline and Batch Sharing in Scientific Workloads  

E-Print Network [OSTI]

The Architectural Implications of Pipeline and Batch Sharing in Scientific Workloads Douglas Thain of six batch-pipelined scientific work- loads. Whereas other studies focus on the behavior of a sin- gle application, we characterize an emerging type of work- load which consists of pipelines of sequential

Liblit, Ben

155

SEPARATION OF TERNARY HETEROAZEOTROPIC MIXTURES IN A CLOSED MULTIVESSEL BATCH DISTILLATION-DECANTER HYBRID  

E-Print Network [OSTI]

SEPARATION OF TERNARY HETEROAZEOTROPIC MIXTURES IN A CLOSED MULTIVESSEL BATCH DISTILLATION, Trondheim, Norway The feasibility of a novel multivessel batch distillation-decanter hybrid for simultaneous enables us to make direct use of the distillation line (or residue curve) map. Simple rules for predicting

Skogestad, Sigurd

156

On the Dynamics of Batch Distillation : A Study of Parametric Sensitivity in Ideal  

E-Print Network [OSTI]

On the Dynamics of Batch Distillation : A Study of Parametric Sensitivity in Ideal Binary Columns distillation processes. By considering the e ect of small changes in the operating parameters, e.g., initial-mail: jacobsen@elixir.e.kth.se 1 #12;1 Introduction Batch distillation has become of increasing importance

Skogestad, Sigurd

157

Toxicity testing results on increased supernate treatment rate of 3700 gallons/batch  

SciTech Connect (OSTI)

In July, 1991, Reactor Materials increased the supernate treatment concentration in the M-Area Dilute Effluent Treatment Facility from 2700 gallons of supernate per 36000 gallon dilute wastewater batch to 3700 gallons/batch. This report summarizes the toxicity testing on the effluents of the increased treatment rate.(JL)

Pickett, J.B.; Martin, H.L.; Diener, G.A.

1992-07-06T23:59:59.000Z

158

Toxicity testing results on increased supernate treatment rate of 3700 gallons/batch. Revision 1  

SciTech Connect (OSTI)

In July, 1991, Reactor Materials increased the supernate treatment concentration in the M-Area Dilute Effluent Treatment Facility from 2700 gallons of supernate per 36000 gallon dilute wastewater batch to 3700 gallons/batch. This report summarizes the toxicity testing on the effluents of the increased treatment rate.(JL)

Pickett, J.B.; Martin, H.L.; Diener, G.A.

1992-07-06T23:59:59.000Z

159

Optimization of Fed-Batch Saccharomyces cereWisiae Fermentation Using Dynamic Flux Balance Models  

E-Print Network [OSTI]

ARTICLES Optimization of Fed-Batch Saccharomyces cereWisiae Fermentation Using Dynamic Flux Balance metabolism with dynamic mass balances on key extracellular species. Model-based dynamic optimization concentration profiles, and the final batch time are treated as decision variables in the dynamic optimization

Mountziaris, T. J.

160

Optimal Production Planning Models for Parallel Batch Reactors with Sequence-dependent Changeovers  

E-Print Network [OSTI]

1 Optimal Production Planning Models for Parallel Batch Reactors with Sequence planning of parallel multi-product batch reactors with sequence-dependent changeovers, a challenging of number of products, reactors or length of the time horizon, we propose a decomposition technique based

Grossmann, Ignacio E.

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Sorption of four triarylmethane dyes in a sandy soil determined by batch and column experiments  

E-Print Network [OSTI]

Sorption of four triarylmethane dyes in a sandy soil determined by batch and column experiments for their suitability as hydrological tracers. Sorption is one of the limiting factors for the suitability of a dye tracer. In this study we examined the sorption of four dyes to a sandy soil using batch and column

Flury, Markus

162

Production of Cellulase on Mixtures of Xylose and Cellulose in a Fed-Batch Process  

E-Print Network [OSTI]

saccharification to sugars for ethanol production. In the past decade, enzymatic hydrolysis of cellulose hasProduction of Cellulase on Mixtures of Xylose and Cellulose in a Fed-Batch Process Ali Mohagheghi was studied in a fed-batch system. An initial mixture of 30 g/L xylose and 20 g/L cellulose

California at Riverside, University of

163

Medical ice slurry production device  

DOE Patents [OSTI]

The present invention relates to an apparatus for producing sterile ice slurries for medical cooling applications. The apparatus is capable of producing highly loaded slurries suitable for delivery to targeted internal organs of a patient, such as the brain, heart, lungs, stomach, kidneys, pancreas, and others, through medical size diameter tubing. The ice slurry production apparatus includes a slurry production reservoir adapted to contain a volume of a saline solution. A flexible membrane crystallization surface is provided within the slurry production reservoir. The crystallization surface is chilled to a temperature below a freezing point of the saline solution within the reservoir such that ice particles form on the crystallization surface. A deflector in the form of a reciprocating member is provided for periodically distorting the crystallization surface and dislodging the ice particles which form on the crystallization surface. Using reservoir mixing the slurry is conditioned for easy pumping directly out of the production reservoir via medical tubing or delivery through other means such as squeeze bottles, squeeze bags, hypodermic syringes, manual hand delivery, and the like.

Kasza, Kenneth E. (Palos Park, IL); Oras, John (Des Plaines, IL); Son, HyunJin (Naperville, IL)

2008-06-24T23:59:59.000Z

164

Subglacial floods beneath ice sheets  

Science Journals Connector (OSTI)

...depth 100m subject to a geothermal heat flux of 50m2 gives...crude estimate). As well as the present theoretical...Atlantic or to the Gulf of Mexico. One reason for supposing...do not know this very well for a palaeo-ice sheet...and P Gogineni2001High geothermal flow, basal melt, and...

2006-01-01T23:59:59.000Z

165

SULFATE SOLUBILITY LIMIT VERIFICATION FOR DWPF SLUDGE BATCH 7A  

SciTech Connect (OSTI)

During processing at the Defense Waste Processing Facility (DWPF), high sulfate concentrations in the feed are a concern to DWPF as it can lead to the formation of a detrimental, sulfate-rich, molten salt phase on the surface of the glass melt pool. To avoid these issues, a sulfate concentration limit was implemented into the Product Composition Control System (PCCS). Related to SB7a frit development efforts, the Savannah River National Laboratory (SRNL) assessed the viability of using the current 0.6 wt % SO{sub 4}{sup 2-} limit set for SB6 (in glass) and the possibility of increasing the SO{sub 4}{sup 2-} solubility limit in PCCS to account for anticipated sulfur concentrations, targeted waste loadings, and inclusion of secondary streams (e.g., Actinide Removal Process (ARP)) with two recommended frits (Frit 418 and Frit 702) for SB7a processing. For a nominal SB7a blend with a 63 inch SB6 heel remaining in Tank 40 (projection SB7a-63), a 0.60 wt% SO{sub 4}{sup 2-} in glass limit was determined for waste loadings of 34 wt% up to 40 wt% with Frit 418 based on crucible melts with batched chemicals. SRNL also examined the inclusion of ARP for the same blending scenario (SB7a-63-ARP) with Frit 418 and at least a 0.6 wt% SO{sub 4}{sup 2-} level, and waste loadings of 34 wt% to 40 wt% were also acceptable. When a visible yellow and/or white sulfate salt layer was visible on the surface of any cooled glass, it was assumed to have surpassed the solubility limit of SO{sub 4}{sup 2-} for that particular composition. All of the glasses fabricated at these concentrations did not exhibit a sulfate rich salt layer on the surface of the glass melt and retained the majority of the batched SO{sub 4}{sup 2-}. At higher levels of SO{sub 4}{sup 2-} 'spiked' into the projected sludge compositions over the aforementioned interval of waste loadings, with Frit 418, low viscosity sulfur layers were observed on the surface of glass melts which confirm exceeding the solubility limit. The same sludge scenarios were also tested with Frit 702 and all glasses did not exhibit sulfur layers on the surfaces of the glass melts at spiking levels up to 0.80 wt% SO{sub 4}{sup 2-}. An ultimate SO{sub 4}{sup 2-} limit was not defined with Frit 702, but if projected SO{sub 4}{sup 2-} concentrations are expected to increase with the onset of SB7a processing, a higher limit is achievable with Frit 702 than is achievable with Frit 418. Given the anticipated concentration of SO{sub 4}{sup 2-} for SB7a, a SO{sub 4}{sup 2-} limit of 0.6 wt % SO{sub 4}{sup 2-} is recommended for processing using Frit 418. Once the confirmed SB7a composition is known and should a higher limit be needed, SRNL can re-evaluate the limit based on the actual composition and provide an updated recommendation. It has been observed that higher levels of SO{sub 4}{sup 2-} in glass can be retained with compositional changes to the frit, as was demonstrated by the glasses fabricated using Frit 702. SRNL also recommends the continuation of studies to define a more 'global' sulfate concentration limit to account for future sludge batch composition uncertainties.

Billings, A.

2011-04-19T23:59:59.000Z

166

SLUDGE BATCH 7 PREPARATION TANK 4 AND 12 CHARACTERIZATION  

SciTech Connect (OSTI)

Samples of PUREX sludge from Tank 4 and HM sludge from Tank 12 were characterized in preparation for Sludge Batch 7 (SB7) formulation in Tank 51. SRNL analyses on Tank 4 and Tank 12 were requested in separate Technical Assistance Requests (TAR). The Tank 4 samples were pulled on January 19, 2010 following slurry operations by F-Tank Farm. The Tank 12 samples were pulled on February 9, 2010 following slurry operations by H-Tank Farm. At the Savannah River National Laboratory (SRNL), two 200 mL dip samples of Tank 4 and two 200 mL dip samples of Tank 12 were received in the SRNL Shielded Cells. Each tank's samples were composited into clean 500 mL polyethylene storage bottles and weighed. The composited Tank 4 sample was 428.27 g and the composited Tank 12 sample was 502.15 g. As expected there are distinct compositional differences between Tank 4 and Tank 12 sludges. The Tank 12 slurry is much higher in Al, Hg, Mn, and Th, and much lower in Fe, Ni, S, and U than the Tank 4 slurry. The Tank 4 sludge definitely makes the more significant contribution of S to any sludge batch blend. This S, like that observed during SB6 washing, is best monitored by looking at the total S measured by digesting the sample and analyzing by inductively coupled plasma - atomic emission spectroscopy (ICPAES). Alternatively, one can measure the soluble S by ICP-AES and adjust the value upward by approximately 15% to have a pretty good estimate of the total S in the slurry. Soluble sulfate measurements by ion chromatography (IC) will be biased considerably lower than the actual total S, the difference being due to the non-sulfate soluble S and the undissolved S. Tank 12 sludge is enriched in U-235, and hence samples transferred into SRNL from the Tank Farm will need to be placed on the reportable special nuclear material inventory and tracked for total U per SRNL procedure requirements.

Bannochie, C.; Click, D.; Pareizs, J.

2010-05-21T23:59:59.000Z

167

Municipal solid waste degradation and landfill gas resources characteristics in self-recirculating sequencing batch bioreactor landfill  

Science Journals Connector (OSTI)

Based on the degradation characteristics of municipal solid waste (MSW) in China, the traditional anaerobic sequencing batch bioreactor landfill (ASBRL) was optimized, and an improved anaerobic sequencing batch b...

Xiao-zhi Zhou ???; Shu-xun Sang ???; Li-wen Cao ???

2012-12-01T23:59:59.000Z

168

Improving Energy Efficiency and Cost-Effectiveness of Batch Distillation for Separating Wide Boiling Constituents. 1. Vapor Recompression Column  

Science Journals Connector (OSTI)

Although the direct vapor recompression column (VRC) has been known for its application in continuous distillation since the 1960s, the research on vapor recompressed batch distillation (VRBD) started a couple of years ago. In this contribution, a batch ...

Md. Malik Nawaz Khan; G. Uday Bhaskar Babu; Amiya K. Jana

2012-11-05T23:59:59.000Z

169

New ice rules for nanoconfined monolayer ice from first principles  

E-Print Network [OSTI]

Understanding the structural tendencies of nanoconfined water is of great interest for nanoscience and biology, where nano/micro-sized objects may be separated by very few layers of water. Here we investigate the properties of ice confined to a quasi-2D monolayer by a featureless, chemically neutral potential, using density-functional theory simulations with a non-local van der Waals density functional. An ab initio random structure search reveals all the energetically competitive monolayer configurations to belong to only two of the previously-identified families, characterized by a square or honeycomb hydrogen-bonding network, respectively. From an in-depth analysis we show that the well-known ice rules for bulk ice need to be revised for the monolayer, with distinct new rules appearing for the two networks. All identified stable phases for both are found to be non-polar (but with a topologically non-trivial texture for the square) and, hence, non-ferroelectric, in contrast to the predictions of empirical f...

Corsetti, Fabiano; Artacho, Emilio

2015-01-01T23:59:59.000Z

170

Statistical Review of Data from DWPF's Process Samples for Batches 19 Through 30  

SciTech Connect (OSTI)

The measurements derived from samples taken during the processing of batches 19 through 30 at the Defense Waste Processing Facility (DWPF) affords an opportunity for review and comparisons. This report has looked at some of the statistics from these data. Only the data reported by the DWPF lab (that is, the data provided by the lab as representative of the samples taken) are available for this analysis. In some cases, the sample results reported may be a subset of the sample results generated by the analytical procedures. A thorough assessment of the DWPF lab's analytical procedures would require the complete set of data. Thus, the statistics reported here, specifically, as they relate to analytical uncertainties, are limited to the reported data for these samples, A fell for the consistency of the incoming slurry is the estimation of the components of variation for the Sludge Receipt and Adjustment Tank (SRAT) receipts. In general, for all of the vessels, the data from batches after 21 show smaller batch-to-batch variation than the data from all the batches. The relative contributions of batch-to-batch versus residual, which includes analytical, are presented in these analyses.

Edwards, T.B.

1999-04-06T23:59:59.000Z

171

Optimal production and rationing policies of a make-to-stock production system with batch demand and backordering  

Science Journals Connector (OSTI)

In this paper, we consider the stock rationing problem of a single-item make-to-stock production/inventory system with multiple demand classes. Demand arrives as a Poisson process with a randomly distributed batch size. It is assumed that the batch demand ... Keywords: Batch demand, Inventory, Markov decision process, Production, Rationing

Jianjun Xu; Shaoxiang Chen; Bing Lin; Rohit Bhatnagar

2010-05-01T23:59:59.000Z

172

Definition: Automatic Generation Control | Open Energy Information  

Open Energy Info (EERE)

Automatic Generation Control Automatic Generation Control Jump to: navigation, search Dictionary.png Automatic Generation Control Equipment that automatically adjusts generation in a Balancing Authority Area from a central location to maintain the Balancing Authority's interchange schedule plus Frequency Bias. AGC may also accommodate automatic inadvertent payback and time error correction.[1] View on Wikipedia Wikipedia Definition Related Terms system, power, electricity generation, load, frequency bias, balancing authority, balancing authority area, smart grid References ↑ Glossary of Terms Used in Reliability Standards An inline LikeLike UnlikeLike You like this.Sign Up to see what your friends like. Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Automatic_Generation_Control&oldid=502513"

173

Hydrogen ICE Vehicle Testing Activities  

SciTech Connect (OSTI)

The Advanced Vehicle Testing Activity teamed with Electric Transportation Applications and Arizona Public Service to develop and monitor the operations of the APS Alternative Fuel (Hydrogen) Pilot Plant. The Pilot Plant provides 100% hydrogen, and hydrogen and compressed natural gas (H/CNG)-blended fuels for the evaluation of hydrogen and H/CNG internal combustion engine (ICE) vehicles in controlled and fleet testing environments. Since June 2002, twenty hydrogen and H/CNG vehicles have accumulated 300,000 test miles and 5,700 fueling events. The AVTA is part of the Department of Energys FreedomCAR and Vehicle Technologies Program. These testing activities are managed by the Idaho National Laboratory. This paper discusses the Pilot Plant design and monitoring, and hydrogen ICE vehicle testing methods and results.

J. Francfort; D. Karner

2006-04-01T23:59:59.000Z

174

Install an Automatic Blowdown-Control System  

Broader source: Energy.gov [DOE]

This steam tip sheet on installing automatic blowdown controls provide how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

175

Tracer transport in the Greenland Ice Sheet: constraints on ice cores and glacial history  

Science Journals Connector (OSTI)

The climate history and dynamics of the Greenland Ice Sheet are studied using a coupled model of the depositional provenance and transport of glacier ice, allowing simultaneous prediction of the detailed isotopic stratigraphy of ice cores at all the major Greenland sites. Adopting a novel method for reconstructing the agedepth relationship, we greatly improve the accuracy of semi-Lagrangian tracer tracking schemes and can readily incorporate an age-dependent ice rheology. The larger aim of our study is to impose new constraints on the glacial history of the Greenland Ice Sheet. Leading sources of uncertainty in the climate and dynamic history are encapsulated in a small number of parameters: the temperature and elevation isotopic sensitivities, the glacialinterglacial precipitation contrast and the effective viscosity of ice in the flow law. Comparing predicted and observed ice layering at ice core sites, we establish plausible ranges for the key model parameters, identify climate and dynamic histories that are mutually consistent and recover the past depositional elevation of ice cores to ease interpretation of their climatic records. With the coupled three-dimensional model of ice dynamics and provenance transport we propose a method to place all the ice core records on a common time scale and use discrepancies to adjust the reconstructed climate history. Analysis of simulated GRIP ice layering and borehole temperature profiles confirms that the GRIP record is sensitive to the dynamic as well as to the climatic history, but not enough to strongly limit speculation on the state of the Greenland Ice Sheet during the Eemian. In contrast, our study indicates that the Dye 3 and Camp Century ice cores are extremely sensitive to ice dynamics and greatly constrain Eemian ice sheet reconstructions. We suggest that the maximum Eemian sea-level contribution of the ice sheet was in the range of 3.54.5m.

Nicolas Lhomme; Garry K.C. Clarke; Shawn J. Marshall

2005-01-01T23:59:59.000Z

176

FAFCO Ice Storage test report  

SciTech Connect (OSTI)

The Ice Storage Test Facility (ISTF) is designed to test commercial ice storage systems. FAFCO provided a storage tank equipped with coils designed for use with a secondary fluid system. The FAFCO ice storage system was tested over a wide range of operating conditions. Measured system performance during charging showed the ability to freeze the tank fully, storing from 150 to 200 ton-h. However, the charging rate showed significant variations during the latter portion of the charge cycle. During discharge cycles, the storage tank outlet temperature was strongly affected by the discharge rate and tank state of charge. The discharge capacity was dependent upon both the selected discharge rate and maximum allowable tank outlet temperature. Based on these tests, storage tank selection must depend on both charge and discharge conditions. This report describes FAFCO system performance fully under both charging and discharging conditions. While the test results reported here are accurate for the prototype 1990 FAFCO Model 200, currently available FAFCO models incorporate significant design enhancements beyond the Model 200. At least one major modification was instituted as a direct result of the ISTF tests. Such design improvements were one of EPRI`s primary goals in founding the ISTF.

Stovall, T.K.

1993-11-01T23:59:59.000Z

177

Proton Ordering of Cubic Ice Ic: Spectroscopy and Computer Simulations  

E-Print Network [OSTI]

by producing rotational Bjerrum L-defects.1 Ambient-pressure hexagonal ice, ice Ih, shows the lowest produced from ice Ih using hydroxide doping, for example, by freezing a 0.1 M KOH solution. Because ice IhProton Ordering of Cubic Ice Ic: Spectroscopy and Computer Simulations Philipp Geiger, Christoph

Dellago, Christoph

178

Tri-Met's Experience With Automatic Passenger Counter and Automatic Vehicle Location Systems  

E-Print Network [OSTI]

Tri-Met's Experience With Automatic Passenger Counter and Automatic Vehicle Location Systems James includes Automatic Vehicle Location (AVL) using a satellite-based global positioning system (GPS); · Voice for temporary data storage, a vehicle control head displaying schedule adherence to operators, detection

Bertini, Robert L.

179

Climate, Ocean and Sea Ice Modeling (COSIM)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Earth, Space Sciences » Earth, Space Sciences » Climate, Ocean and Sea Ice Modeling (COSIM) Climate, Ocean and Sea Ice Modeling (COSIM) The COSIM project develops advanced ocean and ice models for evaluating the role of ocean and ice in high-latitude climate change and projecting the impacts of high-latitude change on regions throughout the globe. Get Expertise Phil Jones COSIM Email Matthew Hecht COSIM Email Elizabeth Hunke COSIM Email Mat Maltrud COSIM Email Bill Lipscomb COSIM Email Scott Elliott COSIM Email Todd Ringler COSIM Email We are also developing a set of next-generation ocean and ice models with variable resolution horizontal grids to focus resolution on regions of interest or regions where specific processes (like eddies) need to be resolved. Summary The COSIM project develops advanced ocean and ice models for evaluating the

180

Historical Antarctic mean sea ice area, sea ice trends, and winds in CMIP5 simulations  

E-Print Network [OSTI]

In contrast to Arctic sea ice, average Antarctic sea ice area is not retreating but has slowly increased since satellite measurements began in 1979. While most climate models from the Coupled Model Intercomparison Project ...

Mahlstein, Irina

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Neglecting ice-atmosphere interactions underestimates ice sheet melt in millennial-scale deglaciation simulations  

E-Print Network [OSTI]

produce an interactive coupled integration: Atmospheric dynamics were equilibrated to an initial iceconstant ice albedos. None of these cases is able to produceproduce substantial deglaciation on a realistic timescale is attributed to the use of temporally invariant ice

Pritchard, M. S.; Bush, A. B.; Marshall, S. J.

2008-01-01T23:59:59.000Z

182

Please use "gres" settings in your batch scripts  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Please use "gres" settings in your batch scripts Please use "gres" settings in your batch scripts Please use "gres" settings in your batch scripts September 4, 2012 by Helen He (0 Comments) We would like to encourage you to use the generic resources ("gres") setting for various file systems that your batch jobs use. This feature is currently available on Hopper and Carver. The advantage of this setting is that your jobs won't start (thus won't fail) during a scheduled file system maintenance. The syntax for the "gres" setting is: #PBS -l gres=filesystem1[%filesystem2%filesystem3...] (new recommendation) or #PBS -l gres=filesystem1:1[%filesystem2:1%filesystem3:1...] (as announced before) Note that the "%" character means "and". Therefore, if multiple file

183

Gas holdup in a gas-liquid-fiber semi-batch bubble column.  

E-Print Network [OSTI]

??A 4-m high, 15.24-cm diameter semi-batch bubble column connected to one of three perforated plate gas distributors with open area ratios A = 0.57%, 0.99%, (more)

Su, Xuefeng

2005-01-01T23:59:59.000Z

184

Influence of petroleum coking additive on the quality of coal batch, coke, and tar  

Science Journals Connector (OSTI)

Given the shortage of coal with good coking properties, a petroleum coking additive is introduced in coal batch so as to expand the range of plasticity. This additive improves coke quality in every respect, excep...

I. I. Melnikov; V. M. Kryachuk; D. A. Mezin; A. A. Gorbunov

2011-12-01T23:59:59.000Z

185

Influence of the coking properties of coal batch on coke properties  

Science Journals Connector (OSTI)

At OAO Zapadno-Sibirskii Metallurgicheskii Kombinat (ZSMK), research is undertaken to improve the optimization of coking batch. The basic approach, proposed by...K opt..., which characterizes the ...

D. A. Zavalishin; L. S. Belaya; G. R. Gainieva; V. G. Lupenko

2009-10-01T23:59:59.000Z

186

Design of Batch Tube Reactor 377 Applied Biochemistry and Biotechnology Vol. 9193, 2001  

E-Print Network [OSTI]

Design of Batch Tube Reactor 377 Applied Biochemistry and Biotechnology Vol. 91­93, 2001 Copyright Biochemistry and Biotechnology Vol. 91­93, 2001 pretreatment represents the most expensive single step

California at Riverside, University of

187

Industrial experience with the thermal preparation of coal batch before coking  

Science Journals Connector (OSTI)

The basic industrial results obtained with thermal preparation of batch, followed by bed coking in horizontal furnaces, are briefly reviewed. Precarbon technology, which, in various forms, has been successfull...

Yu. S. Vasilev; A. I. Gordienko; G. V. Dolgarev

2008-07-01T23:59:59.000Z

188

Using coke-battery flue gas to dry coal batch before coking  

Science Journals Connector (OSTI)

The utilization of heat from coke-battery flue gases and other potential secondary energy resources in drying coal batch prior to coking is considered. The main factors that influence ... . The reduction in moist...

A. Ya. Eremin; V. G. Mishchikhin; S. G. Stakheev; R. R. Gilyazetdinov

2011-03-01T23:59:59.000Z

189

Glass-batch composition monitoring by laser-induced breakdown spectroscopy  

Science Journals Connector (OSTI)

Laser-induced breakdown spectroscopy is an almost ideal technique for the in situ monitoring of the composition of a glass batch before it enters the glass-melting furnace, saving a...

Lal, Bansi; Yueh, Fang-Yu; Singh, Jagdish P

2005-01-01T23:59:59.000Z

190

IceT users' guide and reference.  

SciTech Connect (OSTI)

The Image Composition Engine for Tiles (IceT) is a high-performance sort-last parallel rendering library. In addition to providing accelerated rendering for a standard display, IceT provides the unique ability to generate images for tiled displays. The overall resolution of the display may be several times larger than any viewport that may be rendered by a single machine. This document is an overview of the user interface to IceT.

Moreland, Kenneth D.

2009-06-01T23:59:59.000Z

191

IceT users' guide and reference.  

SciTech Connect (OSTI)

The Image Composition Engine for Tiles (IceT) is a high-performance sort-last parallel rendering library. In addition to providing accelerated rendering for a standard display, IceT provides the unique ability to generate images for tiled displays. The overall resolution of the display may be several times larger than any viewport that may be rendered by a single machine. This document is an overview of the user interface to IceT.

Moreland, Kenneth D.

2011-01-01T23:59:59.000Z

192

A ``triple sea-ice state'' mechanism for the abrupt warming and synchronous ice sheet collapses during Heinrich events  

E-Print Network [OSTI]

the strong sea ice albedo and insulating feedbacks. Such abrupt sea ice changes can also account was trapped at the base of the ice sheet due to the thick and insulating glacier that prevented it fromA ``triple sea-ice state'' mechanism for the abrupt warming and synchronous ice sheet collapses

Tziperman, Eli

193

COTS FPGA/SRAM Irradiations Using a Dedicated Testing Infrastructure for Characterization of Large Component Batches  

E-Print Network [OSTI]

This paper introduces a new testing platform for irradiation of large batches of COTS FPGA and SRAMs. The main objective is measurement of component radiation response and assessment of component-to-component variability within one batch. The first validation and test results using the testing platform are presented for 150nm TFT SRAM (Renesas) and different sizes of the 130nm ProASIC3 FPGA (Microsemi).

Slawosz, Uznanski; Johannes, Walter; Andrea, Vilar-Villanueva

2015-01-01T23:59:59.000Z

194

Microsoft PowerPoint - S08-02_Rios-Armstrong_SRS Experience Preparing Salt Batches.ppt  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Savannah River Site (SRS) Experience Savannah River Site (SRS) Experience with Preparing Salt Batches Presentation to: EM Waste Processing Technical Exchange Date: November 17 th , 2010 Author: Maria A. Rios-Armstrong Position: Small Column Ion Exchange (SCIX) Process Engineering Lead Savannah River Remediation SRR-SPT-2010-00222 Print Close 2 Agenda * SRS Composite Inventory * Salt Processing * SRS Liquid Waste System * Background * Interim Salt Disposition Project (ISDP) Salt Batches - ISDP Salt Batch 1 - ISDP Salt Batch 2 - ISDP Salt Batch 3 - ISDP Salt Batch 4 * Future Salt Batches * Summary * Questions Print Close 3 SRS Composite Inventory Saltcake Sludge Volume 37.1 Million Gallons (Mgal) Curies 183 MCi (52%) 169 MCi (48%) 352 Million Curies (MCi) 171 MCi (49%) Sludge 34.2 Mgal (92%) 2.9 Mgal (8%) 18.4 Mgal (49%) Inventory values as of 2010-06-30

195

Viscosity of interfacial water regulates ice nucleation  

SciTech Connect (OSTI)

Ice formation on solid surfaces is an important phenomenon in many fields, such as cloud formation and atmospheric icing, and a key factor for applications in preventing freezing. Here, we report temperature-dependent nucleation rates of ice for hydrophilic and hydrophobic surfaces. The results show that hydrophilic surface presents a lower ice nucleation rate. We develop a strategy to extract the thermodynamic parameters, J{sub 0} and ?, in the context of classical nucleation theory. From the extracted J{sub 0} and ?, we reveal the dominant role played by interfacial water. The results provide an insight into freezing mechanism on solid surfaces.

Li, Kaiyong; Chen, Jing; Zhang, Qiaolan; Zhang, Yifan [Beijing National Laboratory for Molecular Sciences (BNLMS), Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China) [Beijing National Laboratory for Molecular Sciences (BNLMS), Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Xu, Shun; Zhou, Xin [School of Physics, University of Chinese Academy of Sciences, Beijing 100049 (China)] [School of Physics, University of Chinese Academy of Sciences, Beijing 100049 (China); Cui, Dapeng; Wang, Jianjun, E-mail: wangj220@iccas.ac.cn; Song, Yanlin [Beijing National Laboratory for Molecular Sciences (BNLMS), Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China)] [Beijing National Laboratory for Molecular Sciences (BNLMS), Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China)

2014-03-10T23:59:59.000Z

196

Relationships between Water Wettability and Ice Adhesion  

E-Print Network [OSTI]

Ice formation and accretion may hinder the operation of many systems critical to national infrastructure, including airplanes, power lines, windmills, ships, and telecommunications equipment. Yet despite the pervasiveness ...

Meuler, Adam J.

197

The convective desalination of sea ice  

E-Print Network [OSTI]

containing both liquid brine and solid (pure water) ice. Frad is the flux of penetrating solar radiation. Thus the thermal properties of sea ice are composed of those of the solid and liquid phases that make up sea ice. Fixed-salinity models used in older... components of the physical climate system. Evolving in space and time, sea ice has thermal and mechanical properties that must be updated dynamically for a faithful representation within climate models. Such models are vital tools to help people everywhere...

Rees Jones, David

2014-07-01T23:59:59.000Z

198

Ice Formation in Gas-Diffusion Layers  

E-Print Network [OSTI]

porous media does not exist. Once the fundamentals of iceFundamental Issues in Subzero PEMFC Startup and Operation. UTC Fuel Cells, DOE

Dursch, Thomas

2013-01-01T23:59:59.000Z

199

City of Eagan ?Civic Ice Arena Renovation  

Broader source: Energy.gov [DOE]

Project objectives: Provide a reliable central ice making and heating system that meets the performance requirements of the owner. Reduce operation and maintenance costs.

200

The last Scandinavian Ice Sheet in northwestern Russia: ice flow patterns and decay dynamics  

E-Print Network [OSTI]

U N C O R R EC TED PR O O F The last Scandinavian Ice Sheet in northwestern Russia: ice flow Sheet in northwestern Russia: ice flow patterns and decay dynamics. Boreas, Vol. 35, pp. xxxÁxxx. Oslo) in northwestern Russia took place after a period of periglacial conditions. Till of the last SIS, Bobrovo till

Ingólfsson, ?lafur

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

ARKTOS: An intelligent system for SAR sea ice image classification  

E-Print Network [OSTI]

We present an intelligent system for satellite sea ice image analysis named Advanced Reasoning using Knowledge for T ping Of Sea ice (ARKTOS). ARKTOS performs fully automated analysis of synthetic aperture radar (SAR) sea ice images by mimicking...

Soh, L. K.; Tsatsoulis, Costas; Gineris, D.; Bertoia, C.

2004-01-01T23:59:59.000Z

202

Automatic Performance Collection (AutoPerf) | Argonne Leadership...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Automatic Performance Collection (AutoPerf) A beta version of a tool for the automatic collection of hardware performance counter and MPI information has been installed on Vesta...

203

Greenland Ice Sheet "Sliding" a Small Contributor to Future Sea...  

Office of Science (SC) Website

(ice2sea manuscript no. 121). ElmerIce simulations were performed using high-performance computing resources from Grand quipement National de Calcul Intensif - Centre...

204

Hail Ice Damage of Stringer-Stiffened Curved Composite Panels /  

E-Print Network [OSTI]

of projectile SHI. Thus, the ice produces a more large-areaproduce uneven pressure/forces being applied onto the ice

Le, Jacqueline Linh

2013-01-01T23:59:59.000Z

205

SciTech Connect: optimal initial conditions for coupling ice...  

Office of Scientific and Technical Information (OSTI)

Conference: optimal initial conditions for coupling ice sheet models to earth system models Citation Details In-Document Search Title: optimal initial conditions for coupling ice...

206

Effects of ice cover on sediment resuspension and phosphorus ...  

Science Journals Connector (OSTI)

Since ice coverage increased shear resistance, climate-driven absence or shortening of ice-cover would reduce the period for settling of particles and their...

207

ARM - PI Product - Large Scale Ice Water Path and 3-D Ice Water Content  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ProductsLarge Scale Ice Water Path and 3-D Ice Water ProductsLarge Scale Ice Water Path and 3-D Ice Water Content Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : Large Scale Ice Water Path and 3-D Ice Water Content Site(s) SGP TWP General Description Cloud ice water concentration is one of the most important, yet poorly observed, cloud properties. Developing physical parameterizations used in general circulation models through single-column modeling is one of the key foci of the ARM program. In addition to the vertical profiles of temperature, water vapor and condensed water at the model grids, large-scale horizontal advective tendencies of these variables are also required as forcing terms in the single-column models. Observed horizontal advection of condensed water has not been available because the

208

The influence of ice nucleation mode and ice vapor growth on simulation of  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The influence of ice nucleation mode and ice vapor growth on simulation of The influence of ice nucleation mode and ice vapor growth on simulation of arctic mixed-phase clouds Avramov, Alexander The Pennsylvania State University Category: Modeling Mixed-phase arctic stratus clouds are the predominant cloud type in the Arctic . Perhaps one of the most intriguing of their features is that they tend to have liquid tops that precipitate ice. Despite the fact that this situation is colloidally unstable, these cloud systems are quite long lived - from a few days to over a couple of weeks. Previous studies have suggested that this longevity may be due to a paucity of ice nucleating aerosols (ice nuclei, or IN) in the Arctic. Such studies have shown that small changes in IN concentrations can cause large changes in the amount of liquid water within a mixed-phase stratus deck. We use the Regional

209

6, 20592090, 2006 Ice nucleation in  

E-Print Network [OSTI]

intermediate solubility and melting temperatures) nucleated ice at the same temperature as aqueous sulfuric Discussions Ice nucleation in sulfuric acid/organic aerosols: implications for cirrus cloud formation M. R. Beaver1 , M. J. Elrod2 , R. M. Garland1 , and M. A. Tolbert1 1 Department of Chemistry and Biochemistry

Boyer, Edmond

210

Ocean and Sea Ice SAF Technical Note  

E-Print Network [OSTI]

Ocean and Sea Ice SAF Technical Note SAF/OSI/CDOP/KNMI/TEC/RP/147 Validation of ASCAT 12.5-km winds The Ocean and Sea Ice Satellite Application Facility (OSI SAF) delivers an operational level 2 wind product produces a level 1 product with 12.5-km WVC spacing that has a resolution of approximately 25 km. Since

Stoffelen, Ad

211

Ocean and Sea Ice SAF Technical Note  

E-Print Network [OSTI]

Ocean and Sea Ice SAF Technical Note SAF/OSI/CDOP2/KNMI/TEC/RP/194 Quality Control of Ku. The OSCAT level 2a data are available in near-real time and OWDP is used at KNMI to produce the Ocean and Sea Ice (OSI) SAF wind product which is made available to users. A beta version of OWDP is also

Stoffelen, Ad

212

Largest Ice-Bank Promotes Load Management  

E-Print Network [OSTI]

California's largest ice-bank storage system is an example of how thermal storage can be applied to both new and existing buildings. At the Union Oil Company in Brea, California, one massive ice-storage system satisfies the air conditioning needs...

Brarmann, G. L.

1983-01-01T23:59:59.000Z

213

Stability of ice-sheet grounding lines  

Science Journals Connector (OSTI)

...81 73 Stability of ice-sheet grounding lines Richard F. Katz 1 * M. Grae Worster 2...ice sheets are sensitive to grounding-line position and variation, characteristics...models. We present a theory for grounding-line dynamics in three spatial dimensions and...

2010-01-01T23:59:59.000Z

214

E-Print Network 3.0 - anti-icing Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Used Unserviceable No de-ice, anti-ice or related 73 - - - Wing tail... De-icing boots - 10 3 0 Wing tail bleed-air anti-ice - 3 0 0 Wing tail electric anti-ice - 2 0...

215

The microstructure of polar ice. Part I: Highlights from ice core research  

Science Journals Connector (OSTI)

Abstract Polar ice sheets play a fundamental role in Earth's climate system, by interacting actively and passively with the environment. Active interactions include the creeping flow of ice and its effects on polar geomorphology, global sea level, ocean and atmospheric circulation, and so on. Passive interactions are mainly established by the formation of climate records within the ice, in form of air bubbles, dust particles, salt microinclusions and other derivatives of airborne impurities buried by recurrent snowfalls. For a half-century scientists have been drilling deep ice cores in Antarctica and Greenland for studying such records, which can go back to around a million years. Experience shows, however, that the ice-sheet flow generally disrupts the stratigraphy of the bottom part of deep ice cores, destroying the integrity of the oldest records. For all these reasons glaciologists have been studying the microstructure of polar ice cores for decades, in order to understand the genesis and fate of ice-core climate records, as well as to learn more about the physical properties of polar ice, aiming at better climate-record interpretations and ever more precise models of ice-sheet dynamics. In this Part I we review the main difficulties and advances in deep ice core drilling in Antarctica and Greenland, together with the major contributions of deep ice coring to the research on natural ice microstructures. In particular, we discuss in detail the microstructural findings from Camp Century, Byrd, Dye 3, GRIP, GISP2, NorthGRIP, Vostok, Dome C, EDML, and Dome Fuji, besides commenting also on the earlier results of some pioneering ventures, like the Jungfraujoch Expedition and the NorwegianBritishSwedish Antarctic Expedition, among others. In the companion Part II of this work (Faria etal., 2014), the review proceeds with a survey of the state-of-the-art understanding of natural ice microstructures and some exciting prospects in this field of research.

Srgio H. Faria; Ilka Weikusat; Nobuhiko Azuma

2014-01-01T23:59:59.000Z

216

ICE CORE RECORDS | Greenland Stable Isotopes  

Science Journals Connector (OSTI)

Abstract Greenland ice cores contain a wealth of information on past climatic conditions throughout the Northern Hemisphere. A historical perspective on the climatic interpretation of stable isotopes in water and ice is presented in the introduction, while the remainder of the article is devoted to the current interpretation of stable isotope data from Greenland ice cores. The progress in our understanding of stable isotope signals, on timescales from seasons to glacial cycles, is discussed and evaluated through numerous examples from Greenland ice cores. Stable isotope profiles from the Camp Century, Dye-3, GISP2, GRIP, NGRIP, and Renland deep ice cores are emphasized, as they all provide climatic information dating back into the Eemian period.

B.M. Vinther; S.J. Johnsen

2013-01-01T23:59:59.000Z

217

Optimal design and operation of multivessel batch distillation with fixed product demand. Modelling, simulation and optimisation of design and operation parameters in multivessel batch distillation under fixed product demand scenario and strict product specifications using simple dynamic model in gPROMS.  

E-Print Network [OSTI]

??Increased interest in unconventional batch distillation column configurations offers new opportunities for increasing the flexibility and energy efficiency of batch distillation. One configuration of particular (more)

Mahmud, Mohamed Taher Mustafa

2010-01-01T23:59:59.000Z

218

Energy Cost Calculator for Commercial Ice Machines | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Ice Machines Ice Machines Energy Cost Calculator for Commercial Ice Machines October 8, 2013 - 2:25pm Addthis Vary capacity size, energy cost, hours of operation, and /or efficiency level. INPUT SECTION Input the following data (if any parameter is missing, calculator will set to default value). Defaults Type of Ice Cube Machine Ice Making Head Self-Contained Remote Condensing Unit Ice Making Head Type of Condenser Air Cooled Water Cooled Air Cooled Ice Harvest Rate (lbs. ice per 24 hrs.) lbs. per 24 hrs. 500 lbs. per 24 hrs. Energy Consumption (per 100 lbs. of ice) kWh 5.5 kWh Quantity of ice machines to be purchased 1 Energy Cost $/kWh 0.06 $/kWh Annual Hours of Operation hrs. 3000 hrs. Calculate Reset OUTPUT SECTION Performance per Ice Cube Machine Your

219

Development of tools for automatic generation of PLC code  

E-Print Network [OSTI]

This Master thesis was performed at CERN and more specifically in the EN-ICE-PLC section. The Thesis describes the integration of two PLC platforms, that are based on CODESYS development tool, to the CERN defined industrial framework, UNICOS. CODESYS is a development tool for PLC programming, based on IEC 61131-3 standard, and is adopted by many PLC manufacturers. The two PLC development environments are, the SoMachine from Schneider and the TwinCAT from Beckhoff. The two CODESYS compatible PLCs, should be controlled by the SCADA system of Siemens, WinCC OA. The framework includes a library of Function Blocks (objects) for the PLC programs and a software for automatic generation of the PLC code based on this library, called UAB. The integration aimed to give a solution that is shared by both PLC platforms and was based on the PLCOpen XML scheme. The developed tools were demonstrated by creating a control application for both PLC environments and testing of the behavior of the code of the library.

Koutli, Maria; Rochez, Jacques

220

Pronunciation learning for automatic speech recognition  

E-Print Network [OSTI]

In many ways, the lexicon remains the Achilles heel of modern automatic speech recognizers (ASRs). Unlike stochastic acoustic and language models that learn the values of their parameters from training data, the baseform ...

Badr, Ibrahim

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Query Expansion with an Automatically Generated Thesaurus  

Science Journals Connector (OSTI)

This paper describes a new method to automatically obtain a new thesaurus which exploits previously collected information. Our method ... a text collection, a set of source thesauri and other linguistic resources...

Jos R. Prez-Agera; Lourdes Araujo

2006-01-01T23:59:59.000Z

222

Automatic tuning of continuous-time filters  

E-Print Network [OSTI]

Integrated high-Q continuous-time filters require adaptive tuning circuits that will correct the filter parameters such as center frequency and quality factor (Q). Three different automatic tuning techniques are introduced. In all of the proposed...

Sumesaglam, Taner

2004-11-15T23:59:59.000Z

223

Automatic program timing profiles with FTN4  

SciTech Connect (OSTI)

Design of a scheme for producing execution timing profiles of FORTRAN programs automatically is proposed with a recommendation to implement it as an option to the compiler. An experimental implementation on the LBL 7600 is also described. 1 figure.

Friedman, R.

1980-09-01T23:59:59.000Z

224

Automatic Program Translation " A Third Way  

Science Journals Connector (OSTI)

Translation between data formats, between multimedia mark-up languages, between modelling languages and between programming languages are classic problems in computer science and software engineering. There are two traditional approaches to automatic ...

David P. Clark; Min Chen; John V. Tucker

2004-12-01T23:59:59.000Z

225

The Challenge of an Automatic Mssbauer Analysis  

Science Journals Connector (OSTI)

The present paper reports on our efforts to obtain an intelligent and automatic Mssbauer analysis. For this propose, a program was implemented capable to analyse and fit a Mssbauer spectrum, identify the sub...

Paulo A. de Souza Jr.; Vijayendra K. Garg

1999-01-01T23:59:59.000Z

226

Automatic 5-axis NC toolpath generation  

E-Print Network [OSTI]

Despite over a decade of research, automatic toolpath generation has remained an elusive goal for 5-axis NC machining. This thesis describes the theoretical and practical issues associated with generating collision free ...

Balasubramaniam, Mahadevan, 1976-

2001-01-01T23:59:59.000Z

227

Feature selection for automatic solder joint inspection  

E-Print Network [OSTI]

FEATURE SELECTION FOR AUTOMATIC SOLDER JOINT INSPECTION A Thesis CHENG-CHENG LEE Submitted to the Graduate College of Texas AiVM University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE August 1987 Major... Subject: Mechanical Engineering FEATURE SELECTION FOR AUTOMATIC SOLDER JOINT INSPECTION A Thesis by CHENG-CHENG LEE Approved as to style and content by: Morris Driels (Chairman of Committee) Norman Gris ld (Member) i(?? Oren Xlasor'i (kfembef...

Lee, Cheng-Cheng

2012-06-07T23:59:59.000Z

228

Predicting the yield of coking byproducts on the basis of elementary and petrographic analysis of the coal batch  

Science Journals Connector (OSTI)

Mathematical models are developed for predicting the yield of coking byproducts on the basis of elementary and petrographic analysis of the coal batch.

M. B. Golovko; I. D. Drozdnik; D. V. Miroshnichenko; Yu. S. Kaftan

2012-06-01T23:59:59.000Z

229

Energy Saving in Conventional and Unconventional Batch Reactive Distillation: Application to Hydrolysis of Methyl Lactate System  

Science Journals Connector (OSTI)

Abstract In this work, energy consumption in a middle vessel batch reactive distillation (MVBRD) column is considered for the production of lactic acid via hydrolysis of methyl lactate. A dynamic optimization problem incorporating a process model is formulated to minimize the batch time which consequently minimizes the total energy consumption. The problem is subject to constraints on the amount and purity of lactic acid. The optimisation variables are reflux ratio and/or reboil ratio which are treated as piecewise constant. The earlier work of the authors on energy consumption in conventional batch reactive distillation column (CBRD) for the same reaction system is used for comparative analysis with the energy consumption in MVBRD. As an example, for a given separation task, the optimization results show that MVBRD is capable of saving over 23% energy compared to energy consumption in CBRD column for the same task.

Elmahboub A. Edreder; Mansour Emtir; Iqbal M. Mujtaba

2014-01-01T23:59:59.000Z

230

GREAT LAKES ICE COVER RaymondA. Asset'  

E-Print Network [OSTI]

hydropower production and cooling water intakes, and damaging shore structures. Ice cover also impactsChapter 6 GREAT LAKES ICE COVER RaymondA. Asset' ABSTRACT: Theformation of ice on the Lallrentian (~rthe Great Lakes anel local weather and climate. The (I1Inllal seasonal and ~'Patialprogression of ice

231

SNOW ON ANTARCTIC SEA ICE Robert A. Massom,1  

E-Print Network [OSTI]

SNOW ON ANTARCTIC SEA ICE Robert A. Massom,1 Hajo Eicken,2 Christian Haas,3 Martin O. Jeffries,2 on Antarctic sea ice plays a complex and highly variable role in air-sea-ice interaction pro- cesses of thicker snow and thin- ner ice in the Antarctic relative to the Arctic (e.g., the importance of flooding

Warren, Stephen

232

Optimization of a Sea Ice Model Using Basinwide Observations of Arctic Sea Ice Thickness, Extent, and Velocity  

E-Print Network [OSTI]

datasets. 1. Introduction Sea ice is important to the climate system because it insulates the cold polarOptimization of a Sea Ice Model Using Basinwide Observations of Arctic Sea Ice Thickness, Extent 2004, in final form 27 June 2005) ABSTRACT A stand-alone sea ice model is tuned and validated using

Feltham, Daniel

233

Nailing Down Ice in a Cloud Model  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nailing Down Ice in a Cloud Model Nailing Down Ice in a Cloud Model For original submission and image(s), see ARM Research Highlights http://www.arm.gov/science/highlights/ Research Highlight A research team led by scientists at Pacific Northwest National Laboratory identified specific strengths and weaknesses of four different ice cloud retrieval algorithms. Their comparisons tested the ability of the algorithms to obtain cloud properties from radar and lidar observational measurements. The team noted the sometimes large variances in heating/cooling measurements compared to the observed data. Identifying specific weaknesses will help scientists improve our understanding of cloud properties in the atmosphere, which can be used for climate model development and evaluation. "Measuring the effective size and mass of ice crystals impacts our understanding

234

Neutron Diffraction of Ice in Hydrogels  

Science Journals Connector (OSTI)

Neutron Diffraction of Ice in Hydrogels ... (14, 15) Neutrons are also especially suited for studying D2O water in hydrogels because hydrogen atoms (H) on the polymer chains are not detectable. ...

Yurina Sekine; Tomoko Ikeda-Fukazawa; Mamoru Aizawa; Riki Kobayashi; Songxue Chi; Jaime A. Fernandez-Baca; Hiroki Yamauchi; Hiroshi Fukazawa

2014-08-26T23:59:59.000Z

235

A New Greenland Deep Ice Core  

Science Journals Connector (OSTI)

...isotopic profile with that from camp Century and with a deep-sea foraminifera...deep-sea cores. The redated Camp Century record suggests a dramatic termination...CENTURIES OF CLIMATIC RECORD FROM CAMP CENTURY ON GREENLAND ICE SHEET, SCIENCE...

W. Dansgaard; H. B. Clausen; N. Gundestrup; C. U. Hammer; S. F. Johnsen; P. M. Kristinsdottir; N. Reeh

1982-12-24T23:59:59.000Z

236

Photoadaptation of high Arctic ice algae  

Science Journals Connector (OSTI)

... of the surface snow cover allowed considerable control over the light conditions of the epontic algae. Algal material was collected from the bottom few centimetres of ice with a SIPRE ... growth in their respective light environments.

Glenn F. Cota

1985-05-16T23:59:59.000Z

237

Weakening of ice by magnesium perchlorate hydrate  

E-Print Network [OSTI]

I show that perchlorate hydrates, which have been indirectly detected at high Martian circumpolar latitudes by the Phoenix Mars Lander, have a dramatic effect upon the rheological behavior of polycrystalline water ice under ...

Lenferink, Hendrik J., 1985-

2012-01-01T23:59:59.000Z

238

Quantifying fit in ice hockey skate boots.  

E-Print Network [OSTI]

??Purpose. This study quantified fit of ice hockey skate boots by measuring the pressure (MP) at the foot/ankle-to-boot interface using three skate sizes. The relationship (more)

Gheorghiu, Cristian R.

2005-01-01T23:59:59.000Z

239

Scattering Properties of Oriented Hexagonal Ice Crystals  

E-Print Network [OSTI]

To interpret the data from spaceborn lidar measurements, one must have a basic understanding of the backscattering of oriented ice particles. The conventional raytracing method is not applicable to the scattering of light by oriented particles...

Zhang, Feng

2010-01-14T23:59:59.000Z

240

Hydrogen Material Compatibility for Hydrogen ICE | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C. pm04smith.pdf More Documents & Publications Hydrogen Materials Compatibility for the H-ICE...

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Observations of the Askaryan Effect in Ice  

SciTech Connect (OSTI)

We report on the first observations of the Askaryan effect in ice: coherent impulsive radio Cherenkov radiation from the charge asymmetry in an electromagnetic (EM) shower. Such radiation has been observed in silica sand and rock salt, but this is the first direct observation from an EM shower in ice. These measurements are important since the majority of experiments to date that rely on the effect for ultra-high energy neutrino detection are being performed using ice as the target medium. As part of the complete validation process for the Antarctic Impulsive Transient Antenna (ANITA) experiment, we performed an experiment at the Stanford Linear Accelerator Center (SLAC) in June 2006 using a 7.5 metric ton ice target, yielding results fully consistent with theoretical expectations.

Gorham, P.W.

2007-01-16T23:59:59.000Z

242

Microsoft Word - IceMountainFinal.docx  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mason West Virginia's Ice Mountain: Where Science Meets Magic On August 6, 1918, the thermometer hit 109 degrees in Hampshire County, West Virginia. It's easy to believe that the...

243

Image Analysis for AutomaticImage Analysis for Automatic PhenotypingPhenotyping MeasurementsMeasurements  

E-Print Network [OSTI]

Image Analysis for AutomaticImage Analysis for Automatic PhenotypingPhenotyping MeasurementsMeasurements (BioSS) WageningenWageningen, 8 March 2012, 8 March 2012 #12;Measurements · How many are there? · How "large" are they? · How "similar" are they? #12;Measurements · How many are there? · How "large" are they

Glasbey, Chris

244

Regelation: why does ice melt under pressure?  

E-Print Network [OSTI]

Unlike other unusual materials whose bonds contract under compression, the O:H nonbond undergoes contraction and the H-O bond elongation towards O:H and H-O length symmetry in water and ice. The energy drop of the H-O bond dictates the melting point Tm depression of ice. Once the pressure is relieved, the O:H-O bond fully recovers its initial state, resulting in Regelation.

Sun, Chang Q

2015-01-01T23:59:59.000Z

245

Effect of Xylan and Lignin Removal by Batch and Flowthrough Pretreatment  

E-Print Network [OSTI]

Effect of Xylan and Lignin Removal by Batch and Flowthrough Pretreatment on the Enzymatic understand these trade-offs, comparative data are reported on xylan and lignin removal and enzymatic with just water enhanced the xylan dissolution rate, more than doubled total lignin removal, and increased

California at Riverside, University of

246

CATALYST ENHANCED MICRO SCALE BATCH ASSEMBLY Rajashree Baskaran1,2  

E-Print Network [OSTI]

CATALYST ENHANCED MICRO SCALE BATCH ASSEMBLY Rajashree Baskaran1,2 , Ji Hao Hoo1 , Bowen Cheng1 with the addition of a few non-participating millimeter scale parts that act as `catalysts'. We present experimental increase in concentration of parts in motion due to addition of catalysts. We adapt a model from chemical

247

Chemical Reduction of PCE by Zero Valent Iron Colloids Batch and Column Experiments  

E-Print Network [OSTI]

Chemical Reduction of PCE by Zero Valent Iron Colloids ­ Batch and Column Experiments Motivation nm NAPASAN Particle - nZVI / PCE-Solution 0 20 40 60 80 100 120 140 0 2 4 6 8 10 12 14 16 18 20 22 24H[-] PCE - Inflow PCE - Outflow TCE - Inflow TCE - Outflow Chloride - Outflow Blank Value Chloride pH Value

Cirpka, Olaf Arie

248

Production Leveling (Heijunka) Implementation in a Batch Production System: a Case Study  

E-Print Network [OSTI]

of Production Leveling outside automotive networks. Additionally, one can question whether Lean Manufacturing, Department of Manufacturing, GETEQ Research Group, Caixa Postal 476, Campus Universit�rio, Trindade, 88040 on a subsidiary of a multinational enterprise located on Brazil, which manufacturing processes comprise batch

Boyer, Edmond

249

HIGH YIELD BATCH PACKAGING OF MICRO DEVICES WITH UNIQUELY ORIENTING SELF-ASSEMBLY  

E-Print Network [OSTI]

HIGH YIELD BATCH PACKAGING OF MICRO DEVICES WITH UNIQUELY ORIENTING SELF-ASSEMBLY Jiandong Fang of uniquely orienting self-assembly with 2mm square diced silicon parts. Each silicon part has one hydrophobic shape-directed self-assembly assigns parts to complementary trenches in parallel [2]; (3) capillary

250

Sorption of Eu(III) on Attapulgite Studied by Batch, XPS and EXAFS Techniques  

E-Print Network [OSTI]

Sorption of Eu(III) on Attapulgite Studied by Batch, XPS and EXAFS Techniques Q.H. FAN,, , X.L. TANH, ionic strength and temperature on sorption of Eu(III) on attapulgite were investigated in the presence and absence of fulvic acid (FA) and humic acid (HA). The results indicated that the sorption of Eu

Boyer, Edmond

251

Utilizing Green Energy Prediction to Schedule Mixed Batch and Service Jobs in Data Centers  

E-Print Network [OSTI]

Utilizing Green Energy Prediction to Schedule Mixed Batch and Service Jobs in Data Centers Baris on using immediately available green energy to supplement the non- renewable, or brown energy at the cost of canceling and rescheduling jobs whenever the green energy availability is too low [16]. In this paper we

Simunic, Tajana

252

Nitrogen removal via nitrite in a sequencing batch reactor treating sanitary landfill leachate  

E-Print Network [OSTI]

Nitrogen removal via nitrite in a sequencing batch reactor treating sanitary landfill leachate, for the automation of a bench-scale SBR treating leachate generated in old landfills. Attention was given 20­30% due to the low biodegradability of organic matter in the leach- ate from old landfills

253

Three-Dimensional Flow and Thermal Structures in Glass Melting Furnaces. Part II: Effect of Batch and Bubbles.  

E-Print Network [OSTI]

) the wall heat losses, and (v) the thickness of glass melt containing gas bubbles under the batch. The study indicates that the partially submerged batch and heat losses through the refractories have a strong impact by adjusting the fuel firing in the combustion space. The heat flux distribution resulting from combustion

Pilon, Laurent

254

A Fast Batched Cholesky Factorization on a GPU Tingxing Dong, Azzam Haidar, Stanimire Tomov, and Jack Dongarra  

E-Print Network [OSTI]

of the three algorithms described above, along with the comparison to an optimized par- allel batched Cholesky algorithms ­ non- blocked, blocked, and recursive blocked ­ were examined. The left-looking version to update the trailing matrix in the recursive blocked algorithm. Our batched Cholesky achieves up to 1

Dongarra, Jack

255

Spin-One Ising Model for Ice VIIPlastic Ice Phase Transitions  

Science Journals Connector (OSTI)

We propose a spin model compatible with ice VIIplastic ice phase transitions and critical phenomena discovered recently by computer simulations. The BlumeCapel spin-1 Ising model is extended in order to describe the entropic stabilization effect in the ...

Masakazu Matsumoto; Kazuhiro Himoto; Hideki Tanaka

2014-08-21T23:59:59.000Z

256

Nonequilibrium air clathrate hydrates in Antarctic ice: a paleopiezomdter for polar ice caps  

Science Journals Connector (OSTI)

...long as the ice thickness changes by only a few hundred meters. Examination of the deep ice cores from the Dye-3 and Camp Century sites in Greenland were made by the same microscopic thermal-needle method: at both these sites the onset of craigite...

H Craig; H Shoji; C C Langway; Jr

1993-01-01T23:59:59.000Z

257

ICED'09/Paper number (Contribution ID) 1 INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED'09  

E-Print Network [OSTI]

ICED'09/Paper number (Contribution ID) 1 INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED'09 24 - 27 AUGUST 2009, STANFORD UNIVERSITY, STANFORD, CA, USA CREATIVITY THEORIES AND SCIENTIFIC DISCOVERY: A STUDY OF C-K THEORY AND INFUSED DESIGN ABSTRACT Creativity is central to human activity

Shai, Offer

258

ICED'09/373 1 INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED'09  

E-Print Network [OSTI]

ICED'09/373 1 INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED'09 24 - 27 AUGUST 2009, STANFORD UNIVERSITY, STANFORD, CA, USA CREATIVITY THEORIES AND SCIENTIFIC DISCOVERY: A STUDY OF C-K THEORY AND INFUSED Creativity is central to human activity and is a powerful force in personal and organizational success

Reich, Yoram

259

Multisite Disordered Structure of Ice VII to 20 GPa  

Science Journals Connector (OSTI)

Neutron diffraction measurements on ice VII and ice VIII at pressures up to 20 GPa provide direct evidence of multisite disorder of both oxygen and deuterium atoms in D2O ice VII, and give the magnitudes of the site separations. An O-D distance and D--D angle closest to those found in ice VIII are obtained with oxygen sites displaced along ?111? directions. Such displacements imply an H-bond geometry significantly different from that found in ice VIII, and this may have implications for the centering transition to ice X.

R. J. Nelmes; J. S. Loveday; W. G. Marshall; G. Hamel; J. M. Besson; S. Klotz

1998-09-28T23:59:59.000Z

260

Acoustic and seismic measurement of ice processes  

Science Journals Connector (OSTI)

As sea ice responds to environmental forcing it deforms leading to the storage of strain energy. When mechanical failure occurs most of this energy is dissipated through fracturing but a small portion radiates as seismic and acoustic waves. These waves provide useful signals for sensing the failure process in the ice. In a recent ice mechanics experiment conducted north of Prudhoe Bay (SIMI 94) a large number of ice failure events were observed using geophone and hydrophone arrays. Preliminary results are presented including a large?scale tensile fracture test and naturally occurring sounds near a closing lead. For the artificial fracture the acoustic signals allow determination of cracking rate fracture advance and crack propagation velocities. The overall crack propagation speed is estimated to be of order 50 m?s?1; maximum cracking activities occur prior to peak loading. In the second data set the naturally occurring stick?slip process was observed as two ice sheets moved against each other in a closing lead. A wide range of frequencies can occur simultaneously representing different components of the sliding and slipping mechanisms.

David M. Farmer; Yunbo Xie

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Hydrogenation reactions in interstellar CO ice analogues  

E-Print Network [OSTI]

Hydrogenation reactions of CO in inter- and circumstellar ices are regarded as an important starting point in the formation of more complex species. Previous laboratory measurements by two groups on the hydrogenation of CO ices resulted in controversial results on the formation rate of methanol. Our aim is to resolve this controversy by an independent investigation of the reaction scheme for a range of H-atom fluxes and different ice temperatures and thicknesses. Reaction rates are determined by using a state-of-the-art ultra high vacuum experimental setup to bombard an interstellar CO ice analog with room temperature H atoms. The reaction of CO + H into H2CO and subsequently CH3OH is monitored by a Fourier transform infrared spectrometer in a reflection absorption mode. In addition, after each completed measurement a temperature programmed desorption experiment is performed to identify the produced species. Different H-atom fluxes, morphologies, and ice thicknesses are tested. The formation of both formaldeh...

Fuchs, G W; Ioppolo, S; Romanzin, C; Bisschop, S E; Andersson, S; Van Dishoeck, E F; Linnartz, H

2009-01-01T23:59:59.000Z

262

Automatic Fish Classification for Underwater Species Behavior Understanding  

E-Print Network [OSTI]

Automatic Fish Classification for Underwater Species Behavior Understanding Concetto Spampinato an automatic fish classi- fication system that operates in the natural underwater en- vironment to assist marine biologists in understanding fish behavior. Fish classification is performed by combining two types

Fisher, Bob

263

Automatic vehicle following for emergency lane change maneuvers  

E-Print Network [OSTI]

A lane change maneuver is one of the many appropriate responses to an emergency situation. This thesis proposes to design a combined controller for automatic vehicles for an emergency lane change (ELC) maneuver on an Automatic Highway System (AHS...

Yoon, Seok Min

2012-06-07T23:59:59.000Z

264

Automatically Generating Symbolic Prefetches for Distributed Transactional Memories  

E-Print Network [OSTI]

Automatically Generating Symbolic Prefetches for Distributed Transactional Memories Alokika Dash static compiler analysis that can automatically generate symbolic prefetches for distributed applications and Brian Demsky University of California, Irvine Abstract. Developing efficient distributed applications

Boyer, Edmond

265

Automatic Red Eye Removal for Digital Photography  

E-Print Network [OSTI]

Chapter 1 Automatic Red Eye Removal for Digital Photography FRANCESCA GASPARINI DISCo, Dipartimento The red eye effect is a well known problem in photography. It is often seen in amateur shots taken with a built-in flash, but the problem is also well known to professional photographers. Red eye is the red

Schettini, Raimondo

266

Automatic Video Shot Detection from MPEG Stream  

E-Print Network [OSTI]

Automatic Video Shot Detection from MPEG Stream Jianping Fan Department of Computer Science;Why we need video shots? a. Text Retrieval: Keyword Extraction Indexing Document Storage Reverse File Indexing #12;Why we need video shots? b. Database Query: Entity Extraction sid name login age gpa 53666

Fan, Jianping

267

Automatically Generating Plans for Manufacturing* Billy Harris  

E-Print Network [OSTI]

Automatically Generating Plans for Manufacturing* Billy Harris Diane J. Cook Frank Lewis§ January of action. ORGANIZATION LEVEL COORDINATION LEVEL EXECUTION LEVEL A B S T R A C T I O N P R E C I S I O N

Cook, Diane J.

268

Automatic TLI recognition system, general description  

SciTech Connect (OSTI)

This report is a general description of an automatic target recognition system developed at the Idaho National Engineering Laboratory for the Department of Energy. A user`s manual is a separate volume, Automatic TLI Recognition System, User`s Guide, and a programmer`s manual is Automatic TLI Recognition System, Programmer`s Guide. This system was designed as an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system naturally incorporates image data fusion, and it gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. In addition to its primary function as a trainable target recognition system, this is also a versatile, general-purpose tool for image manipulation and analysis, which can be either keyboard-driven or script-driven. This report includes descriptions of three variants of the computer hardware, a description of the mathematical basis if the training process, and a description with examples of the system capabilities.

Lassahn, G.D.

1997-02-01T23:59:59.000Z

269

Automatic Alignment of Genus-Zero Surfaces  

Science Journals Connector (OSTI)

A new algorithm is presented that provides a constructive way to conformally warp a triangular mesh of genus zero to a destination surface with minimal metric deformation, as well as a means to compute automatically a measure of the geometric difference ... Keywords: Conformal mapping, mesh warping, Mbius transformation, nonrigid registration

Patrice Koehl; Joel Hass

2014-03-01T23:59:59.000Z

270

Automatic video tagging using content redundancy  

Science Journals Connector (OSTI)

The analysis of the leading social video sharing platform YouTube reveals a high amount of redundancy, in the form of videos with overlapping or duplicated content. In this paper, we show that this redundancy can provide useful information about connections ... Keywords: automatic tagging, content-based links, data organization, neighbor-based tagging, tag propagation, video duplicates

Stefan Siersdorfer; Jose San Pedro; Mark Sanderson

2009-07-01T23:59:59.000Z

271

Fast Automatic Security Protocol Generation Hongbin Zhou Simon N. Foley  

E-Print Network [OSTI]

and relies on the skill of the protocol designer. Saidi [32] proposes a semi-automatic design tool based

Foley, Simon

272

Intertemporal Computable Equilibrium System (ICES) | Open Energy  

Open Energy Info (EERE)

Intertemporal Computable Equilibrium System (ICES) Intertemporal Computable Equilibrium System (ICES) Jump to: navigation, search Tool Summary Name: Intertemporal Computable Equilibrium System (ICES) Agency/Company /Organization: Fondazione Eni Enrico Mattei Sector: Climate, Energy Complexity/Ease of Use: Moderate Website: www.feem.it/getpage.aspx?id=138&sez=Research&padre=18&sub=75&idsub=102 Related Tools Ex Ante Appraisal Carbon-Balance Tool (EX-ACT) General Equilibrium Model for Economy - Energy - Environment (GEM-E3) DNE21+ ... further results Find Another Tool FIND DEVELOPMENT IMPACTS ASSESSMENT TOOLS A recursive dynamic general equilibrium model developed with the main but not exclusive purpose of assessing the final welfare implication of climate change impacts on world economies. In addition to climate-change impact

273

Ice Towing Tank | Open Energy Information  

Open Energy Info (EERE)

Ice Towing Tank Ice Towing Tank Jump to: navigation, search Basic Specifications Facility Name Ice Towing Tank Overseeing Organization University of Iowa Hydrodynamic Testing Facility Type Tow Tank Length(m) 21.2 Beam(m) 5.0 Depth(m) 1.3 Cost(per day) Contact POC Special Physical Features Specialized for cold regions research, room temperature can be decreased to -10°F Towing Capabilities Towing Capabilities Yes Maximum Velocity(m/s) 0.5 Length of Effective Tow(m) 15.0 Wavemaking Capabilities Wavemaking Capabilities None Channel/Tunnel/Flume Channel/Tunnel/Flume None Wind Capabilities Wind Capabilities None Control and Data Acquisition Cameras Yes Description of Camera Types Underwater Available Sensors Acoustics, Thermal, Turbulence, Velocity Data Generation Capability

274

High-resolution subsurface water-ice distributions on Mars  

Science Journals Connector (OSTI)

... Theoretical models indicate that water ice is stable in the shallow subsurface (depths of water-ice table that steadily increases in depth with decreasing latitude. More detailed modelling has ...

Joshua L. Bandfield

2007-05-03T23:59:59.000Z

275

Searching for Cosmic Accelerators via IceCube  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Searching for Cosmic Accelerators via IceCube Searching for Cosmic Accelerators via IceCube Berkeley Lab Researchers Part of an International Hunt November 21, 2013 Lynn Yarris,...

276

Application of Ice Nucleation Kinetics in Orographic Clouds  

Science Journals Connector (OSTI)

Ice nucleation by silver iodide-sodium iodide aerosol particles has been characterized in the Colorado State University isothermal cloud chamber using the techniques of chemical kinetics. Two separate mechanisms of condensation-freezing ice ...

Rochelle R. Blumenstein; Robert M. Rauber; Lewis O. Grant; William G. Finnegan

1987-10-01T23:59:59.000Z

277

Evolutionary Optimization of an Ice Accretion Forecasting System  

Science Journals Connector (OSTI)

The ability to model and forecast accretion of ice on structures is very important for many industrial sectors. For example, studies conducted by the power transmission industry indicate that the majority of failures are caused by icing on ...

Pawel Pytlak; Petr Musilek; Edward Lozowski; Dan Arnold

2010-07-01T23:59:59.000Z

278

Cirrus cloud formation and the role of heterogeneous ice nuclei  

E-Print Network [OSTI]

Composition, size, and phase are key properties that define the ability of an aerosol particle to initiate ice in cirrus clouds. Properties of cirrus ice nuclei (IN) have not been well constrained due to a lack of systematic ...

Froyd, Karl D.

2013-01-01T23:59:59.000Z

279

Meltwater effects on flow of Greenland's ice sheet less severe...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

severe than feared Meltwater effects on flow of Greenland's ice sheet less severe for sea level rise than earlier feared, scientists say The team found that accelerating ice sheet...

280

Field determination of the densities of lake ice sheets  

Science Journals Connector (OSTI)

Oct 3, 1975 ... mating the mean density of the white ice component of such a sheet makes use of the buoyancy equation for floating ice in the form h' ' p'i =.

2000-01-04T23:59:59.000Z

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Alternative Fuels Data Center: Electric Ice Resurfacers Improve Air Quality  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Electric Ice Electric Ice Resurfacers Improve Air Quality in Minnesota to someone by E-mail Share Alternative Fuels Data Center: Electric Ice Resurfacers Improve Air Quality in Minnesota on Facebook Tweet about Alternative Fuels Data Center: Electric Ice Resurfacers Improve Air Quality in Minnesota on Twitter Bookmark Alternative Fuels Data Center: Electric Ice Resurfacers Improve Air Quality in Minnesota on Google Bookmark Alternative Fuels Data Center: Electric Ice Resurfacers Improve Air Quality in Minnesota on Delicious Rank Alternative Fuels Data Center: Electric Ice Resurfacers Improve Air Quality in Minnesota on Digg Find More places to share Alternative Fuels Data Center: Electric Ice Resurfacers Improve Air Quality in Minnesota on AddThis.com... Sept. 14, 2013

282

Automatic Digital Surface Model (DSM) Generation from Linear Array Images  

E-Print Network [OSTI]

Automatic Digital Surface Model (DSM) Generation from Linear Array Images A dissertation submitted-examiner Presented by Li Zhang Zurich 2005 #12;IGP Mitteilungen Nr. 88 Automatic Digital Surface Model (DSM-906467-55-4 #12;DISS. ETH NO. 16078 Automatic Digital Surface Model (DSM) Generation from Linear Array Images

Giger, Christine

283

Automatic parallelization of object oriented models executed with inline solvers  

Science Journals Connector (OSTI)

In this work we report preliminary results of automatically generating parallel code from equation-based models together at two levels: Performing inline expansion of a Runge-Kutta solver combined with fine-grained automatic parallelization of the resulting ... Keywords: automatic parallelization, modelica

Hkan Lundvall; Peter Fritzson

2007-09-01T23:59:59.000Z

284

ANIMATION OF THE NORMAL ICE CYCLE OF THE LAURENTIAN GREAT LAKES OF NORTH AMERICA  

E-Print Network [OSTI]

OF ANNUAL ICE CYCLE 1. Fall Cooling 2. Ice Formation 3. Ice Thickness 4. Seasonal Maximum Ice Cover 5ANIMATION OF THE NORMAL ICE CYCLE OF THE LAURENTIAN GREAT LAKES OF NORTH AMERICA R.A. Assel and J describes an interactive menu- driven computer tutorial on the contemporary ice cover climatology

285

Maximum late Holocene extent of the western Greenland Ice Sheet during the late 20th century  

E-Print Network [OSTI]

the 20th century. This suggests a lagged ice-margin response to prior cooling, such as the Little Ice AgeMaximum late Holocene extent of the western Greenland Ice Sheet during the late 20th century Samuel Keywords: Greenland Ice Sheet Little Ice Age 10 Be exposure dating Ice-dammed lake Lake sediment core a b

Briner, Jason P.

286

Numerical simulation of ice-induced loads on ships and comparison with field measurements  

E-Print Network [OSTI]

Department of Marine Technology, NTNU May 28, 2013 #12;Motivation Local ice load Global ice load ShipNumerical simulation of ice-induced loads on ships and comparison with field measurements Biao Su's performance · Ice-hull interaction · Local ice load · Global ice load · Ship's performance #12;Outline

Nørvåg, Kjetil

287

Maneuverability of ships in ice: numerical simulation and comparison with field measurements  

E-Print Network [OSTI]

Maneuverability of ships in ice: numerical simulation and comparison with field measurements Biao Su Department of Marine Technology, NTNU May 28, 2013 #12;Motivation Local ice load Global ice load Ship's performance · Ice-hull interaction · Local ice load · Global ice load · Ship's performance #12

Nørvåg, Kjetil

288

Recent Metal Pollution in Agassiz Ice Cap  

Science Journals Connector (OSTI)

This is probably due to the close proximity and similar elevation of the two areas (Agassiz Ice Cap, Canadian Arctic and Camp Century, northwest Greenland), which are likely subjected to the same polluted air masses. ... Figure 3 shows Pb concentrations covering the past 250 years for three different Arctic areas:? Camp Century, northwest Greenland (dashed line, ref 1); Summit, central Greenland (solid line, ref 8); and Agassiz Ice Cap (star symbols, this work). ... Since Camp Century is lower than Summit (1866 vs 3228 m above sea level) and is expected to receive more pollution, the relative position of the two lines is reasonable, the dashed line being higher than the solid one. ...

V. Cheam; G. Lawson; J. Lechner; R. Desrosiers

1998-11-10T23:59:59.000Z

289

The IceCube Computing Infrastructure Model  

Science Journals Connector (OSTI)

In addition to the big LHC experiments, a number of mid-size experiments are coming online which need to define new computing models to meet the demands on processing and storage requirements of those experiments. We present the hybrid computing model of IceCube which leverages Grid models with a more flexible direct user model as an example of a possible solution. In IceCube a central data center at UW-Madison serves as a Tier-0 with a single Tier-1 at DESY Zeuthen.

M Merck; S Barnet

2012-01-01T23:59:59.000Z

290

Covered Product Category: Water-Cooled Ice Machines  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) provides acquisition guidance and federal efficiency requirements for water-cooled ice machines.

291

An update on land-ice modeling in the CESM  

SciTech Connect (OSTI)

Mass loss from land ice, including the Greenland and Antarctic ice sheets as well as smaller glacier and ice caps, is making a large and growing contribution to global sea-level rise. Land ice is only beginning to be incorporated in climate models. The goal of the Land Ice Working Group (LIWG) is to develop improved land-ice models and incorporate them in CESM, in order to provide useful, physically-based sea-level predictions. LJWG efforts to date have led to the inclusion of a dynamic ice-sheet model (the Glimmer Community Ice Sheet Model, or Glimmer-CISM) in the Community Earth System Model (CESM), which was released in June 2010. CESM also includes a new surface-mass-balance scheme for ice sheets in the Community Land Model. Initial modeling efforts are focused on the Greenland ice sheet. Preliminary results are promising. In particular, the simulated surface mass balance for Greenland is in good agreement with observations and regional model results. The current model, however, has significant limitations: The land-ice coupling is one-way; we are using a serial version of Glimmer-CISM with the shallow-ice approximation; and there is no ice-ocean coupling. During the next year we plan to implement two-way coupling (including ice-ocean coupling with a dynamic Antarctic ice sheet) with a parallel , higher-order version of Glimmer-CISM. We will also add parameterizations of small glaciers and ice caps. With these model improvements, CESM will be able to simulate all the major contributors to 21st century global sea-level rise. Results of the first round of simulations should be available in time to be included in the Fifth Assessment Report (ARS) of the Intergovernmental Panel on Climate Change.

Lipscomb, William H [Los Alamos National Laboratory

2011-01-18T23:59:59.000Z

292

SRS SLUDGE BATCH QUALIFICATION AND PROCESSING; HISTORICAL PERSPECTIVE AND LESSONS LEARNED  

SciTech Connect (OSTI)

This report provides a historical overview and lessons learned associated with the SRS sludge batch (SB) qualification and processing programs. The report covers the framework of the requirements for waste form acceptance, the DWPF Glass Product Control Program (GPCP), waste feed acceptance, examples of how the program complies with the specifications, an overview of the Startup Program, and a summary of continuous improvements and lessons learned. The report includes a bibliography of previous reports and briefings on the topic.

Cercy, M.; Peeler, D.; Stone, M.

2013-09-25T23:59:59.000Z

293

Sorption Speciation of Nickel(II) onto Ca-Montmorillonite: Batch, EXAFS Techniques and Modeling  

E-Print Network [OSTI]

1 Sorption Speciation of Nickel(II) onto Ca-Montmorillonite: Batch, EXAFS Techniques and Modeling, 44307 Nantes cedex 03, France The sorption speciation of Ni(II) on Ca-montmorillonite was evaluated(II) sorption as well as the local atomic structure of the adsorbed Ni(II) ions. At 0.001 mol/L Ca(NO3)2 and low

Paris-Sud XI, Université de

294

Over Batch Analysis for the LLNL Plutonium Packaging System (PuPS)  

SciTech Connect (OSTI)

This document addresses the concern raised in the Savannah River Site (SRS) Acceptance Criteria (Reference 1, Section 6.a.3) about receiving an item that is over batched by 1.0 kg of fissile materials. This document shows that the occurrence of this is incredible. Some of the Department of Energy Standard 3013 (DOE-STD-3013) requirements are described in Section 2.1. The SRS requirement is discussed in Section 2.2. Section 2.3 describes the way fissile materials are handled in the Lawrence Livermore National Laboratory (LLNL) Plutonium Facility (B332). Based on the material handling discussed in Section 2.3, there are only three errors that could result in a shipping container being over batched. These are: incorrect measurement of the item, selecting the wrong item to package, and packaging two items into a single shipping container. The analysis in Section 3 shows that the first two events are incredible because of the controls that exist at LLNL. The third event is physically impossible. Therefore, it is incredible for an item to be shipped to SRS that is more than 1.0 kg of fissile materials over batched.

Riley, D; Dodson, K

2007-11-19T23:59:59.000Z

295

Over Batch Analysis for the LLNL DOE-STD-3013 Packaging System  

SciTech Connect (OSTI)

This document addresses the concern raised in the Savannah River Site (SRS) Acceptance Criteria about receiving an item that is over batched by 1.0 kg of fissile materials. This document shows that the occurrence of this is incredible. Some of the Department of Energy Standard 3013 (DOE-STD-3013) requirements are described in Section 2.1. The SRS requirement is discussed in Section 2.2. Section 2.3 describes the way fissile materials are handled in the Lawrence Livermore National Laboratory (LLNL) Plutonium Facility (B332). Based on the material handling discussed in Section 2.3, there are only three errors that could result in a shipping container being over batched. These are: incorrect measurement of the item, selecting the wrong item to package, and packaging two items into a single shipping container. The analysis in Section 3 shows that the first two events are incredible because of the controls that exist at LLNL. The third event is physically impossible. Therefore, it is incredible for an item to be shipped to SRS that is more than 1.0 kg of fissile materials over batched.

Riley, D C; Dodson, K

2009-07-02T23:59:59.000Z

296

Analysis Of DWPF Sludge Batch 7a (Macrobatch 8) Pour Stream Samples  

SciTech Connect (OSTI)

The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 7a (SB7a), also referred to as Macrobatch 8 (MB8), in June 2011. SB7a is a blend of the heel of Tank 40 from Sludge Batch 6 (SB6) and the SB7a material that was transferred to Tank 40 from Tank 51. SB7a was processed using Frit 418. During processing of each sludge batch, the DWPF is required to take at least one glass sample to meet the objectives of the Glass Product Control Program (GPCP), which is governed by the DWPF Waste Compliance Plan, and to complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. Three pour stream glass samples and two Melter Feed Tank (MFT) slurry samples were collected while processing SB7a. These additional samples were taken during SB7a to understand the impact of antifoam and the melter bubblers on glass redox chemistry. The samples were transferred to the Savannah River National Laboratory (SRNL) where they were analyzed.

Johnson, F. C.; Pareizs, J. M.

2012-10-24T23:59:59.000Z

297

runManySections.py - Easy Interface to CMSLPC Condor CAF and CERN's Batch  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

runManySections.py - Easy Interface to CMSLPC Condor CAF and CERN's LSF runManySections.py - Easy Interface to CMSLPC Condor CAF and CERN's LSF Batch System Introduction Quick Overview Setup Basic Idea Including a Tarball Using runManySections.py to Create Command File Running Compiled Root Macros Debugging Jobs Locally CERN (LSF) versus FNAL (Condor) Differences Introduction runManySections.py is designed to make it easy to run many different sections (or jobs) at once on the CMSLPC CAF or CERN's batch system. It is designed to complement CRAB as runManySections.py is designed to be used with non-cmsRun executables. The general idea is that you pass in a list of commands you would like run and you get the output of these commands back. It is currently configured to run for the Condor system at CMSLPC CAF and CERN's LSF batch system. It is very easy to configure to run on other

298

Contemporary Lake Superior Ice Cover Climatology Raymond A. Assel  

E-Print Network [OSTI]

1973 to 2002) were digitized and analyzed to produce ice charts that portray spatial patterns of datesContemporary Lake Superior Ice Cover Climatology Raymond A. Assel NOAA Great Lakes Environmental Introduction A brief discussion of Lake Superior ice cover climatology (Phillips, 1978) was included

299

On the scatteringgreenhouse effect of CO 2 ice clouds  

E-Print Network [OSTI]

that young Mars was warm enough to support flowing water present a continuing enigma (Squyres and Kasting 1994). Kasting (1991) showed that, owing to the effects of CO 2 condensation on temperature lapse rate the optical effects of CO 2 ­ice clouds, but remarked that because CO 2 ­ice (unlike water­ice) has very low

Pierrehumbert, Raymond

300

Spectroscopic measurement of the vapour pressure of ice  

Science Journals Connector (OSTI)

...Murphy Meeting Issue Water in the gas phase . We...triple-point state of water and uses frequency-stabilized...temperature-regulated standard humidity generator, which contains ice...within 0.35 per cent. water vapour|ice vapour pressure...technical fields. In atmospheric physics, ice crystals...

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

STATE OF CALIFORNIA ICE STORAGE AIR CONDITIONING (ISAC) UNITS  

E-Print Network [OSTI]

cooling with the compressor). Yes No #12;STATE OF CALIFORNIA ICE STORAGE AIR CONDITIONING (ISAC) UNITS CECSTATE OF CALIFORNIA ICE STORAGE AIR CONDITIONING (ISAC) UNITS CEC-CF-6R-MECH-08 (Revised 08/09) CALIFORNIA ENERGY COMMISSION INSTALLATION CERTIFICATE CF-6R-MECH-08 Ice Storage Air Conditioning (ISAC) Units

302

Climate impacts of ice nucleation A. Gettelman,1,2  

E-Print Network [OSTI]

back to space, cooling the planet. However, ice clouds, being cold, radiate much less long wave and cooling, with warming thought to be slightly larger. [3] Changes to ice cloud microphysics might alterClimate impacts of ice nucleation A. Gettelman,1,2 X. Liu,3 D. Barahona,4,5 U. Lohmann,2 and C

Gettelman, Andrew

303

Stresses generated in cooling viscoelastic ice shells: Application to Europa  

E-Print Network [OSTI]

Stresses generated in cooling viscoelastic ice shells: Application to Europa F. Nimmo Department to cooling and the expansion of the shell due to the ice-water volume change. The former effect generates Citation: Nimmo, F. (2004), Stresses generated in cooling viscoelastic ice shells: Application to Europa, J

Nimmo, Francis

304

Characteristics of Arctic Sea-Ice Thickness Variability in GCMs  

Science Journals Connector (OSTI)

Skillful Arctic sea ice forecasts may be possible for lead times of months or even years owing to the persistence of thickness anomalies. In this study sea ice thickness variability is characterized in fully coupled GCMs and sea iceocean-only ...

Edward Blanchard-Wrigglesworth; Cecilia M. Bitz

2014-11-01T23:59:59.000Z

305

Autosub missions beneath Polar Ice: Preparation and Experience  

E-Print Network [OSTI]

Autosub missions beneath Polar Ice: Preparation and Experience Gwyn Griffiths Southampton, May 2004 #12;Autosub Polar Campaigns J 2001 - Krill distribution and sea ice thickness studies in the northern Weddell Sea (Brierley, Fernandes and Brandon). J 2003 - Sea ice thickness, Bellingshausen Sea

Griffiths, Gwyn

306

Bonding and Electronic Properties of Ice at High Pressure  

E-Print Network [OSTI]

between the nearest oxygen atoms. All ice structures that we discussed so far are insulators. Militzer 1 Bonding and Electronic Properties of Ice at High Pressure B. Militzer Department of Earth of water ice at megabar pressure are characterized with ab initio computer simulations. The focus lies

Militzer, Burkhard

307

ICE SHEET SOURCES OF SEA LEVEL RISE AND FRESHWATER DISCHARGE  

E-Print Network [OSTI]

ICE SHEET SOURCES OF SEA LEVEL RISE AND FRESHWATER DISCHARGE DURING THE LAST DEGLACIATION Anders E the sources of sea level rise and freshwater dis- charge to the global oceans associated with retreat of ice­10 m sea level rise at 19.0­19.5 ka, sourced largely from Northern Hemisphere ice sheet retreat

Carlson, Anders

308

FROM INTERSTELLAR POLYCYCLIC AROMATIC HYDROCARBONS AND ICE TO ASTROBIOLOGY  

E-Print Network [OSTI]

photolysis of these ices produces a host of new compounds, some of which show intriguing prebiotic behavior1 FROM INTERSTELLAR POLYCYCLIC AROMATIC HYDROCARBONS AND ICE TO ASTROBIOLOGY LOUIS J. ALLAMANDOLA, the concept of ices in dense molecular clouds ignored, and the notion of large, abundant, gas phase, carbon

309

Correspondence Laboratory observations of debris-bearing ice facies frozen  

E-Print Network [OSTI]

, others argue that supercooling is not the only mechanism for producing thick basal ice sequencesCorrespondence Laboratory observations of debris-bearing ice facies frozen from supercooled water. Supercooling has been invoked to explain anomalously thick basal ice sequences beneath temperate glaciers

Knight, Peter G.

310

The Need for SPIRIT DEMs to Quantify Antarctic Ice Sheet  

E-Print Network [OSTI]

appropriate mask ­ SPIRIT has the data and could produce the necessary DEMs #12;Conclusions · Antarctic iceThe Need for SPIRIT DEMs to Quantify Antarctic Ice Sheet Discharge Robert Bindschadler NASA & UMBC #12;Antarctic Ice Sheet Discharge · 33 largest, most active basins account for 840 Gt/a (Rignot

Berthier, Etienne

311

Computational methods for several models of ice stream flow  

E-Print Network [OSTI]

on any grid Shallow ice approximation produces oscillatory solutions Nonlinear and linear solvers haveComputational methods for several models of ice stream flow Jed Brown Laboratory of Hydrology transition at ice stream margins Bed slope is discontinuous and of order 1. Taylor expansions no longer valid

Brown, Jed

312

The Ice Rink Problem 1 Bernard M.E. Moret,  

E-Print Network [OSTI]

The Ice Rink Problem 1 Bernard M.E. Moret, Michael Collins, Jared Saia, and Ling Yu Department the sensor footprint. A similar task with a simpler geometry consists of cleaning an ice rink. We prove that the method used in ice rinks (the ``Zamboni algorithm'') is optimal and use it to develop heuristics

Moret, Bernard

313

Operation and Control of Full Ice-storage System  

E-Print Network [OSTI]

In a dividing time ice-storage system, the refrigerator does not operate during power's on-peak period, and all the cooling is supplied by the ice stored in off-peak period, so that the use of electricity can be maintained. When the ice is thawing...

Liu, Q.; Liu, Y.

2006-01-01T23:59:59.000Z

314

Seismic reflection studies of the Amery Ice Shelf, East Antarctica: delineating meteoric and marine ice  

Science Journals Connector (OSTI)

......important role in the global climate system (Allison...studies of the impact of global warming on present-day ice shelves...the subsequent effect on global ocean circulation and...graben, where Permian coal-bearing, flat lying......

Kathleen L. McMahon; Mark A. Lackie

2006-08-01T23:59:59.000Z

315

Ice Mass Balance Buoys: A tool for measuring and attributing changes in the thickness of the Arctic sea ice cover  

E-Print Network [OSTI]

Ice Mass Balance Buoys: A tool for measuring and attributing changes in the thickness of the Arctic sea ice cover Jacqueline A. Richter-Menge1 , Donald K. Perovich1 , Bruce C. Elder1 , Keran Claffey1 Abstract Recent observational and modeling studies indicate that the Arctic sea ice cover is undergoing

Rigor, Ignatius G.

316

Influence of the batch's coke-ore ratio and distribution on the porosity of the melting zone  

SciTech Connect (OSTI)

The variation in gas permeability in the melting zone is considered as a function of the height and configuration of the coke packing and the ore component of the batch.

V.P. Tarasov; L.V. Bykov; P.V. Tarasov [Priazovsk State Technical University, Mariupol (Ukraine)

2008-09-15T23:59:59.000Z

317

Polar bears could survive on persisting ice  

Science Journals Connector (OSTI)

... 2010, although the project has stopped moving forwards since the US government clamped down on offshore oil drilling after the Gulf of Mexico spill in April. Smith doesn't know ... drilling after the Gulf of Mexico spill in April. Smith doesn't know whether a rig itself would have an impact on wildlife seeking refuge on ice in a shoal, ...

Nicola Jones

2010-12-15T23:59:59.000Z

318

Stability of ice-sheet grounding lines  

Science Journals Connector (OSTI)

...for flow down shallow valleys, while the latter considers...Pine Island glacier in West Antarctica. Conclusions...Setting gives a single valley with a width equal to...presence of the internal valley, even if it is narrow...dynamical models of the West Antarctic Ice Sheet...

2010-01-01T23:59:59.000Z

319

Ice nanoclusters at hydrophobic metal surfaces  

E-Print Network [OSTI]

and characterization of metal-supported water hexamers and a family of hydrated nanoclusters-- heptamers, octamers to nucleate through the presence of an `ice nucleating agent': a microscopic seed particle of salt, sand or such as the formation of new water structures not observed in the gas phase, altered H-bond strengths or different

320

Ocean and Sea Ice SAF Technical Note  

E-Print Network [OSTI]

Ocean and Sea Ice SAF Technical Note SAF/OSI/CDOP/KNMI/TEC/TN/165 CMOD5.n - the CMOD5 GMF SAF to produce neutral winds rather than real 10m winds. Currently, the CMOD5 Geophysical Model]. KNMI subsequently produced a CMOD5.n Lookup Table and tested the retrieved Maximum Likelihood Estimator

Stoffelen, Ad

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Orio: Automatic Performance Tuning | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Orio: Automatic Performance Tuning Orio: Automatic Performance Tuning High-level depiction of the structure and the optimization process of the Orio framework High-level depiction of the structure and the optimization process of the Orio framework Orio is an annotation-based empirical tuning system aimed at improving both performance and productivity by enabling software developers to insert annotations in the form of structured comments into their source code. Given the annotated code as input, Orio generates many tuned versions of the same operation and empirically evaluates the versions to select the best-performing one for a specified code fragment. People Involved Azamat Mametjanov Other Contributors Boyana Norris (University of Oregon) Albert Hartono (Ohio State) P. Sadayappan (Ohio State)

322

Catching cosmic clues in the ice - recent results from IceCube  

E-Print Network [OSTI]

IceCube is a neutrino observatory located deep in the Antarctic glacier close to the geographical South Pole. Close to a gigaton of ice has been instrumented with optical sensors with the primary goal of searching for neutrinos from the still unknown sources of the highest-energy cosmic rays. Last year, IceCube observed for the first time ever a handful of high-energy neutrinos which must have originated outside the solar system. The discovery was named the 2013 Breakthrough of the Year by the British magazine Physics World. It is the first necessary step to actually achieve the dream of charting the places in the universe able to accelerate hadrons to energies over a million times higher than those at the LHC. The science goals of IceCube extend beyond astrophysics: IceCube is also a powerful tool for searches of dark matter and can be used to study phenomena connected to the neutrinos themselves, like neutrino oscillations. The talk will be an update on the most recent results from IceCube.

CERN. Geneva

2014-01-01T23:59:59.000Z

323

Automatic CX Tool for Electrical Building  

E-Print Network [OSTI]

management have been reached [ASHRAE, 2005]. The aim of this paper is to show the methodology used to develop an automatic Cx tool for electrical buildings. The tool contains, on the one hand, several Functional Test Procedures (FTPs) for most... temperature control (set point temperature, etc), Lighting & Ventilation: scheduling, zoning, Domestic hot water: scheduling. METHODOLOGY AND TOOL SPECIFICATIONS This Cx tool is intended for the end user, i.e. the energy manager. A particular...

Couillaud, N.; Jandon, M.; Viaud, B.; Clemoncon, B.

2007-01-01T23:59:59.000Z

324

Automatic detection of sweep-meshable volumes  

DOE Patents [OSTI]

A method of and software for automatically determining whether a mesh can be generated by sweeping for a representation of a geometric solid comprising: classifying surface mesh schemes for surfaces of the representation locally using surface vertex types; grouping mappable and submappable surfaces of the representation into chains; computing volume edge types for the representation; recursively traversing surfaces of the representation and grouping the surfaces into source, target, and linking surface lists; and checking traversal direction when traversing onto linking surfaces.

Tautges; Timothy J. (Madison, WI), White; David R. (Pittsburgh, PA)

2006-05-23T23:59:59.000Z

325

Automatic programming of AGVS simulation models  

E-Print Network [OSTI]

restricted its rule base and stack size. While expanded memory to 2M bytes is available for these machines, Turbo Prolog is not currently designed to utilize the Lotus/Intel/MicroSoft protocol necessary for supporting this environment. This problem might...). The modeling system is capable of guiding and assisting the engineer with a level of "expertise" comparable to a trained simulation specialist. The modeling support program is an automatic programming system, written in Turbo Prolog which generates...

Brazier, Mark Kevin

2012-06-07T23:59:59.000Z

326

Grounding-line migration in plan-view marine ice-sheet models: results of the ice2sea MISMIP3d intercomparison  

E-Print Network [OSTI]

models (SSA, AHySSA) produce larger ice sheets than modelsplan-view ice-sheet models they produce different results.the Antarctic ice sheet should at least produce grounding-

2013-01-01T23:59:59.000Z

327

Batch-processed melt-textured YBCO with improved quality for motor and bearing  

Science Journals Connector (OSTI)

Results on an established batch process preparing melt-textured YBCO of high quality and in large quantities are reported. We used a standard composition Y1.5Ba2Cu3O7?x+1wt %CeO2 without further doping to fabricate single domain YBCO monoliths in different sizes and shapes (cylindrical, quadratic) as well as rectangular multi-seeded YBCO monoliths. Up to 23kg of melt-textured YBCO blocks were grown, reproducible in one box furnace run. Top seeding by a self-made SmBCO was improved and rationalized. Optimization of an oxygen annealing treatment led to macro-crack free YBCO monoliths. Each YBCO monolith was characterized by integral levitation force and field mapping. In a single domain, a quadratic monolith with a edge length of 38mm, a maximum induction of 1.44T at 77K and a distance of 0.5mm was frozen. The reproducibility of the batch process is guaranteed. Mean maximum induction from 1.1 to 1.2T at 77K per batch was reached. A trapped magnetic field of 2.5T was achieved between two single domain monoliths in a gap of 1.5mm at 77K. Depending on the application, function elements with different sizes, designs and more or less complex geometry are constructed in several working steps by cutting, machining, bonding and passivation. Selected function elements were checked with field mapping at 77K. The results of our function elements in HTSC reluctance motors with an output power of up to 200kW using single domain material are shown. We report on a fly wheel system DYNASTORE and a system to levitate people.

W Gawalek; T Habisreuther; M Zeisberger; D Litzkendorf; O Surzhenko; S Kracunovska; T A Prikhna; B Oswald; L K Kovalev; W Canders

2004-01-01T23:59:59.000Z

328

Computational Fluid Dynamics of a Semi Batch Reactor for Heavy Oil Hydroconversion  

Science Journals Connector (OSTI)

This work presents the numerical results of the computational fluid dynamics of a semi batch reactor used for hydroconversion of heavy oil. The reactor is a multicomponent system and it is modeled as a pseudo two phase system ( gas + slurry ). The equations used are the continuity equations the momentum equation (Navier?Stokes) and the k?? for turbulence. The numerical method used to solve the mathematical method was the finite volume where the problem was divided in two domains in order to account for the moving part of the impeller. The numerical results indicated convergence of the procedure for the velocity profiles.

T. S. Yamada; R. Guirardello

2009-01-01T23:59:59.000Z

329

Investigation of Rheological Impacts on Sludge Batch 3 as Insoluble Solids and Wash Endpoints are Adjusted  

SciTech Connect (OSTI)

The Defense Waste Processing Facility (DWPF) is currently processing and immobilizing radioactive sludge slurry into a durable borosilicate glass. The DWPF has already processed three sludge batches (Sludge Batch 1A, Sludge Batch 1B, and Sludge Batch 2) and is currently processing the fourth sludge batch (Sludge Batch 3). A sludge batch is defined as a single tank of sludge slurry or a combination of sludge slurries from different tanks that has been or will be qualified before being transferred to DWPF. As a part of the Sludge Batch 3 (SB3) qualification task, rheology measurements of the sludge slurry were requested at different insoluble solids loadings. These measurements were requested in order to gain insight into potential processing problems that may occur as the insoluble solids are adjusted up or down (by concentration or dilution) during the process. As a part of this study, a portion of the ''as received'' SB3 sample was washed with inhibited water (0.015 M NaOH and 0.015 M NaNO2) to target 0.5M Na versus a measured 1M Na in the supernate. The purpose of the ''washing'' step was to allow a comparison of the SB3 rheological data to the rheological data collected for Sludge Batch 2 (SB2) and to determine if there was a dependence of the yield stress and consistency as a function of washing. The ''as received'' SB3 rheology data was also compared to SB3 simulants prepared by the Simulant Development Program in order to provide guidance for selecting a simulant that is more representative of the rheological properties of the radioactive sludge slurry. A summary of the observations, conclusions are: (1) The yield stress and plastic viscosity increased as the weight percent insoluble solids were increased for the ''as received'' and ''washed'' SB3 samples, at a fixed pH. (2) For the same insoluble solids loading, the yield stress for the SB2 sample is approximately a factor of three higher than the ''as received'' SB3 sample. There also appears to be small difference in the plastic viscosity. This difference is probably due to the different Na concentrations of the slurries. (3) The yield stress for the SB2 sample at 17.5 wt. % insoluble solids loading is four times higher than the ''washed'' SB3 sample at 16.5 wt. % insoluble solids. There also appears to be small difference in the plastic viscosity. The differences for the yield stress and consistency can be explained by the differences in the Fe and Na concentrations of the sludge slurry and the anion concentrations of the resulting supernates. (4) The rheological properties (i.e. yield stress and plastic viscosity), as the insoluble solids are adjusted, for the ''as received'' and ''washed'' SB3 samples are different. The plastic viscosity curve for the ''as received'' SB3 sample was higher than the plastic viscosity curve for SB3 ''washed'' sample. The yield stress curve for the ''washed'' SB3 sample is slightly lower than the ''as received'' SB3 sample up until {approx}19 wt. % insoluble solids. The ''washed'' SB3 sample then exceeds the yield stress curve for the ''as received'' SB3 sample. This rheological behavior is probably due to the difference in the Na concentration of the supernate for the samples. (5) No unusual behavior, such as air entrainment, was noted for the ''as received'' SB3 sample. (6) The observed physical properties of the SB3 sample changed after washing. The ''washed'' SB3 sample entrained air readily at higher insoluble solids loadings (i.e. 14.1, 16.5, 19.5 wt. %) as it did for SB2. The air entrainment appeared to dissipate for the SB3 sample at the lower insoluble solids loadings (i.e. 9.7 and 11.7 wt. %). (7) The physical behavior of SB3 can be influenced by controlling the Na concentration in the supernate and the wt. % insoluble solids. The cause for the air entrainment in the ''washed'' SB3 sample could be due to a change in the particle size during the washing step. (8) The SB3 simulants prepared for the Simulant Development Program were approximately a factor of 1.6 to 4 times higher for yield stress and 2.6 to 4 times higher

Fellinger, T. L.

2005-07-12T23:59:59.000Z

330

Batch methods for enriching trace impurities in hydrogen gas for their further analysis  

DOE Patents [OSTI]

Provided herein are batch methods and devices for enriching trace quantities of impurities in gaseous mixtures, such as hydrogen fuel. The methods and devices rely on concentrating impurities using hydrogen transport membranes wherein the time period for concentrating the sample is calculated on the basis of optimized membrane characteristics, comprising its thickness and permeance, with optimization of temperature, and wherein the enrichment of trace impurities is proportional to the pressure ratio P.sub.hi/P.sub.lo and the volume ratio V.sub.1/V.sub.2, with following detection of the impurities using commonly-available detection methods.

Ahmed, Shabbir; Lee, Sheldon H.D.; Kumar, Romesh; Papdias, Dionissios D.

2014-07-15T23:59:59.000Z

331

Selective batch crushing in the coal-preparation shop at OAO NTMK  

SciTech Connect (OSTI)

In September 2004, after reconstruction at OAO Nizhnetagil'skii Metallurgicheskii Kombinat (NTMK), blast furnace 6 went into operation for the production of vanadium from hot metal. At the startup of furnace 6, besides optimising its composition; it was decided to restore selective crushing of the coal batch using pneumatic and mechanical separation in the third unit of the coal preparation shop. Additional increase in the mechanical strength of coke by 1.5-2.0% was predicted with a 0.5-1.0% decrease in wear.

N.A. Berkutov; Yu.V. Stepanov; P.V. Shtark; L.A. Makhortova; N.K. Popova; D.A. Koshkarov; N.V. Tsarev [OAO Nizhnetagil'skii Metallurgicheskii Kombinat (NTMK)(Russian Federation)

2007-05-15T23:59:59.000Z

332

Revised estimates of Greenland ice sheet thinning histories based on ice-core records  

Science Journals Connector (OSTI)

Ice core records were recently used to infer elevation changes of the Greenland ice sheet throughout the Holocene. The inferred elevation changes show a significantly greater elevation reduction than those output from numerical models, bringing into question the accuracy of the model-based reconstructions and, to some extent, the estimated elevation histories. A key component of the ice core analysis involved removing the influence of vertical surface motion on the ?18O signal measured from the Agassiz and Renland ice caps. We re-visit the original analysis with the intent to determine if the use of more accurate land uplift curves can account for some of the above noted discrepancy. To improve on the original analysis, we apply a geophysical model of glacial isostatic adjustment calibrated to sea-level records from the Queen Elizabeth Islands and Greenland to calculate the influence of land height changes on the ?18O signal from the two ice cores. This procedure is complicated by the fact that ?18O contained in Agassiz ice is influenced by land height changes distant from the ice cap and so selecting a single location at which to compute the land height signal is not possible. Uncertainty in this selection is further complicated by the possible influence of Innuitian ice during the early Holocene (128kaBP). Our results indicate that a more accurate treatment of the uplift correction leads to elevation histories that are, in general, shifted down relative to the original curves at GRIP, NGRIP, DYE-3 and Camp Century. In addition, compared to the original analysis, the 1-? uncertainty is considerably larger at GRIP and NGRIP. These changes reduce the data-model discrepancy reported by Vinther etal. (2009) at GRIP, NGRIP, DYE-3 and Camp Century. A more accurate treatment of isostasy and surface loading also acts to improve the data-model fits such that the residuals at all four sites for the period 8kaBP to present are significantly reduced compared to the original analysis. Prior to 8kaBP, the possible influence of Innuitian ice on the inferred elevation histories prevents a meaningful comparison.

Benoit S. Lecavalier; Glenn A. Milne; Bo M. Vinther; David A. Fisher; Arthur S. Dyke; Matthew J.R. Simpson

2013-01-01T23:59:59.000Z

333

Large Scale Ice Water Path and 3-D Ice Water Content  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Cloud ice water concentration is one of the most important, yet poorly observed, cloud properties. Developing physical parameterizations used in general circulation models through single-column modeling is one of the key foci of the ARM program. In addition to the vertical profiles of temperature, water vapor and condensed water at the model grids, large-scale horizontal advective tendencies of these variables are also required as forcing terms in the single-column models. Observed horizontal advection of condensed water has not been available because the radar/lidar/radiometer observations at the ARM site are single-point measurement, therefore, do not provide horizontal distribution of condensed water. The intention of this product is to provide large-scale distribution of cloud ice water by merging available surface and satellite measurements. The satellite cloud ice water algorithm uses ARM ground-based measurements as baseline, produces datasets for 3-D cloud ice water distributions in a 10 deg x 10 deg area near ARM site. The approach of the study is to expand a (surface) point measurement to an (satellite) areal measurement. That is, this study takes the advantage of the high quality cloud measurements at the point of ARM site. We use the cloud characteristics derived from the point measurement to guide/constrain satellite retrieval, then use the satellite algorithm to derive the cloud ice water distributions within an area, i.e., 10 deg x 10 deg centered at ARM site.

Liu, Guosheng

334

ICE Cleaning Test Report.PDF  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

16 16 FIELD DEMONSTRATION OF THE ICE 250 TM CLEANING SYSTEM AT THE ROCKY MOUNTAIN OILFIELD TESTING CENTER CASPER, WYOMING August 18-19, 1999 Date Published: October 5, 1999 J.L. Johnston L.M. Jackson PREPARED FOR THE UNITED STATES DEPARTMENT OF ENERGY/ROCKY MOUNTAIN OILFIELD TESTING CENTER Work Performed Under Rocky Mountain Oilfield Testing Center (RMOTC) CRADA No. 99-009 TABLE OF CONTENTS Abstract.............................................................................................................................................1 Introduction.......................................................................................................................................1 Product Description ...........................................................................................................................1

335

New physics with IceCube  

Science Journals Connector (OSTI)

IceCube, a cubic kilometer neutrino telescope, will be capable of probing neutrino-nucleon interactions in the ultrahigh energy regime, far beyond the energies reached by colliders. In this article we introduce a new observable that combines several advantages; it only makes use of the upward-going neutrino flux, so that the Earth filters the atmospheric muons, and it is only weakly dependent on the initial astrophysical flux uncertainties.

Matias M. Reynoso and Oscar A. Sampayo

2007-08-17T23:59:59.000Z

336

Drilling deep in South Pole Ice  

E-Print Network [OSTI]

To detect the tiny flux of ultra-high energy neutrinos from active galactic nuclei or from interactions of highest energy cosmic rays with the microwave background photons needs target masses of the order of several hundred cubic kilometers. Clear Antarctic ice has been discussed as a favorable material for hybrid detection of optical, radio and acoustic signals from ultra-high energy neutrino interactions. To apply these technologies at the adequate scale hundreds of holes have to be drilled in the ice down to depths of about 2500 m to deploy the corresponding sensors. To do this on a reasonable time scale is impossible with presently available tools. Remote drilling and deployment schemes have to be developed to make such a detector design reality. After a short discussion of the status of modern hot water drilling we present here a design of an autonomous melting probe, tested 50 years ago to reach a depth of about 1000 m in Greenland ice. A scenario how to build such a probe today with modern technologies...

Karg, Timo

2014-01-01T23:59:59.000Z

337

ICE LINES IN CIRCUMBINARY PROTOPLANETARY DISKS  

SciTech Connect (OSTI)

I examine the position of the ice line in circumbinary disks heated by steady mass accretion and stellar irradiation and compare with the critical semimajor axis, interior to which planetary orbits are unstable. There is a critical binary separation, dependent on the binary parameters and disk properties, for which binaries with separations larger than this critical value have ice lines that lie interior to the boundary of stability. For an equal-mass binary comprised of 1 M{sub Sun} components, this critical separation is Almost-Equal-To 1.04 AU, and scales weakly with mass accretion rate and Rosseland mean opacity ({proportional_to}[ M-dot {kappa}{sub R}]{sup 2/9}). Assuming a steady mass accretion rate of M-dot {approx}10{sup -8} M{sub Sun} yr{sup -1} and a Rosseland mean opacity of {kappa}{sub R} {approx} 1 cm{sup 2} g{sup -1}, I show that {approx}> 80% of all binary systems with component masses M{sub *} {approx}< 2.0 M{sub Sun} have ice lines that lie interior to the critical semimajor axis. This suggests that rocky planets should not form in these systems, a prediction which can be tested by looking for planets around binaries with separations larger than the critical separation with Kepler (difficult) and with microlensing.

Clanton, Christian, E-mail: clanton@astronomy.ohio-state.edu [Department of Astronomy, Ohio State University, 140 W. 18th Ave., Columbus, OH 43210 (United States)

2013-05-01T23:59:59.000Z

338

Automatic TLI recognition system, programmer`s guide  

SciTech Connect (OSTI)

This report describes the software of an automatic target recognition system (version 14), from a programmer`s point of view. The intent is to provide information that will help people who wish to modify the software. In separate volumes are a general description of the ATR system, Automatic TLI Recognition System, General Description, and a user`s manual, Automatic TLI Recognition System, User`s Guide. 2 refs.

Lassahn, G.D.

1997-02-01T23:59:59.000Z

339

NOAA Technical Memorandum ERL GLERL-20 SUMMARY OF GREAT LAKES WEATHER AND ICE CONDITIONS,  

E-Print Network [OSTI]

Cooling Phase 3.2.2 Ice Formation and Breakup Phases 3.2.3 The Ice Cycle on Lake Superior 3.2.4 The IceNOAA Technical Memorandum ERL GLERL-20 SUMMARY OF GREAT LAKES WEATHER AND ICE CONDITIONS, WINTER of this NOAA Environmental Research Laboratories publication. ii #12;LANDSAT fake color image of ice cover

340

Changes of Myofibrillar Proteins and Texture in Freshwater Prawn, Macrobrachium rosenbergii, During Iced Storage  

E-Print Network [OSTI]

in an ice slurry. Upon death, whole prawns were stored in slush ice in an insulated container at O°C. After, During Iced Storage H. W. KYE, W. K. NIP and J. H. MOY Introduction Shelf life of ice-chilled freshwater in penaid shrimp dur ing iced storage and demonstrated myo fibrillar breakdown, especially Z

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

NAO influence on net sea ice production and exchanges in the Arctic region: a numerical study  

E-Print Network [OSTI]

ice cover suppresses the development of thermal insulation during the ice formation processNAO influence on net sea ice production and exchanges in the Arctic region: a numerical study Aixue The variability of net sea ice production and sea ice exchange between the Arctic and its adjacent seas

Hu, Aixue

342

HiRISE observations of new impact craters exposing Martian ground ice  

E-Print Network [OSTI]

ice rather than ice-cemented regolith. Although some clean ice may be produced by the impact processHiRISE observations of new impact craters exposing Martian ground ice Colin M. Dundas1 , Shane craters or clusters have been observed to excavate bright material inferred to be ice at mid

Byrne, Shane

343

A model of the threedimensional evolution of Arctic melt ponds on firstyear and multiyear sea ice  

E-Print Network [OSTI]

ice. In the summer the upper layers of sea ice and snow melts producing meltwater that accumulatesA model of the threedimensional evolution of Arctic melt ponds on firstyear and multiyear sea ice F in Arctic melt ponds on the surface of sea ice. An accurate estimate of the fraction of the sea ice surface

Feltham, Daniel

344

Automatic diagnosis and control of distributed solid state lighting systems  

Science Journals Connector (OSTI)

This paper describes a new design concept of automatically diagnosing and compensating LED degradations in distributed solid state lighting (SSL) systems. A failed LED may...

Dong, Jianfei; van Driel, Willem; Zhang, Guoqi

2011-01-01T23:59:59.000Z

345

Fact #850: December 8, 2014 Automatic Transmissions have closed...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Note: Fuel economy average is the production-weighted harmonic mean. Fact 850 Dataset Supporting Information Comparison of Manual and Automatic Transmission Fuel Economy...

346

Low Level Descriptors for Automatic Violin Transcription Alex Loscos  

E-Print Network [OSTI]

Low Level Descriptors for Automatic Violin Transcription Alex Loscos MTG at Universitat Pompeu additional processing. 3. Pitch Analysis Previous system [5] already confronted the problem of octave errors

Wang, Ye

347

Metadata Provided to OSTI via Batch Upload (Site-to-OSTI) | Scientific and  

Office of Scientific and Technical Information (OSTI)

Batch Upload (Site-to-OSTI) Batch Upload (Site-to-OSTI) Print page Print page Email page Email page STI Metadata Elements Required (R), Required, but allows for default value (RWD), or Optional (O). Element Description Requirements Author(s) Include all author names; the primary author should be listed first. Allows for "Not Available" as an option for few cases where necessary. R E-mail Address(es) Provide in same order as author names. Will not be available to the end-user. This data is used by OSTI to automate author notification. O Country of Publication Include if country of publication is not United States; defaults to United States RWD Description/ Abstract Defined as the abstract for STI Products. Provide if available (it can be excerpted from the technical report). Text should be publicly releasable information (not personal, financial, or sensitive). Text should be spell-checked, limited in length to 5000 characters, and follow input standards for special characters.

348

SULFATE RETENTION IN HIGH LEVEL WASTE SLUDGE BATCH 4 GLASSES: A PRELIMINARY ASSESSMENT  

SciTech Connect (OSTI)

Early projections of the Sludge Batch 4 (SB4) composition predicted relatively high concentrations of alumina (Al{sub 2}O{sub 3}, 23.5 wt%) and sulfate (SO{sub 4}{sup 2-}, 1.2 wt%) in the sludge. A high concentration of Al{sub 2}O{sub 3} in the sludge, combined with Na{sub 2}O additions in the frit, raises the potential for nepheline crystallization in the glass. However, strategic frit development efforts at the Savannah River National Laboratory (SRNL) have shown that frits containing a relatively high concentration of B{sub 2}O{sub 3} can both suppress nepheline crystallization and improve melt rates. A high sulfate concentration is a concern to the DWPF as it can lead to the formation of sulfate inclusions in the glass and/or the formation of a molten, sulfate-rich phase atop the melt pool. To avoid these issues, a sulfate concentration limit of 0.4 wt% SO{sub 4}{sup 2-} in glass was originally set in the Product Composition Control System (PCCS) used at DWPF. It was later shown that this limit could be increased to 0.6 wt% SO{sub 4}{sup 2-} in glass for the Frit 418, Sludge Batch 3 (SB3) system.

Fox, K; Tommy Edwards, T; David Peeler, D

2006-12-11T23:59:59.000Z

349

Determination Of Reportable Radionuclides For DWPF Sludge Batch 7B (Macrobatch 9)  

SciTech Connect (OSTI)

The DWPF is receiving radioactive sludge slurry from HLW Tank 40. The radioactive sludge slurry in Tank 40 is a blend of the heel from Sludge Batch 7a (SB7a) and Sludge Batch 7b (SB7b) that was transferred to Tank 40 from Tank 51. The blend of sludge in Tank 40 is also referred to as Macrobatch 9 (MB9). This report develops the list of reportable radionuclides and associated activities as a function of time. Twenty-seven radionuclides have been identified as reportable for DWPF SB7b. Each of these radionuclides has a half-life greater than ten years and contributes more than 0.01% of the radioactivity on a Curie basis at some point from production through the 1100 year period between 2015 and 3115. For SB7b, all of the radionuclides in the Design Basis glass are reportable except for three radionuclides: Pd-107, Cs-135, and Th-230. At no time during the 1100- year period between 2015 and 3115 did any of these three radionuclides contribute to more than 0.01% of the radioactivity on a Curie basis. The radionuclide measurements made for SB7b are the most extensive conducted to date. Some method development/refinement occurred during the conduct of these measurements, leading to lower detection limits and more accurate measurement of some isotopes than was previously possible.

Crawford, C. L.; Diprete, D. P.

2012-12-17T23:59:59.000Z

350

INTERPRETATION OF AT-LINE SPECTRA FROM AFS-2 BATCH #3 FERROUS SULFAMATE TREATMENT  

SciTech Connect (OSTI)

Spectra from the at-line spectrometer were obtained during the ferrous sulfamate (FS) valence adjustment step of AFS-2 Batch #3 on 9/18/2013. These spectra were analyzed by mathematical principal component regression (PCR) techniques to evaluate the effectiveness of this treatment. Despite the complications from Pu(IV), we conclude that all Pu(VI) was consumed during the FS treatment, and that by the end of the treatment, about 85% was as Pu(IV) and about 15% was as Pu(III). Due to the concerns about the odd shape of the Pu(IV) peak and the possibility of this behavior being observed in the future, a follow-up sample was sent to SRNL to investigate this further. Analysis of this sample confirmed the previous results and concluded that it odd shape was due to an intermediate acid concentration. Since the spectral evidence shows complete reduction of Pu(VI) we conclude that it is appropriate to proceed with processing of this the batch of feed solution for HB-Line including the complexation of the fluoride with aluminum nitrate.

Kyser, E.; O'Rourke, P.

2013-12-10T23:59:59.000Z

351

Kinetic model for quartz and spinel dissolution during melting of high-level-waste glass batch  

SciTech Connect (OSTI)

The dissolution of quartz particles and the growth and dissolution of crystalline phases during the conversion of batch to glass potentially affects both the glass melting process and product quality. Crystals of spinel exiting the cold cap to molten glass below can be troublesome during the vitrification of iron-containing high-level wastes. To estimate the distribution of quartz and spinel fractions within the cold cap, we used kinetic models that relate fractions of these phases to temperature and heating rate. Fitting the model equations to data showed that the heating rate, apart from affecting quartz and spinel behavior directly, also affects them indirectly via concurrent processes, such as the formation and motion of bubbles. Because of these indirect effects, it was necessary to allow one kinetic parameter (the pre-exponential factor) to vary with the heating rate. The resulting kinetic equations are sufficiently simple for the detailed modeling of batch-to-glass conversion as it occurs in glass melters. The estimated fractions and sizes of quartz and spinel particles as they leave the cold cap, determined in this study, will provide the source terms needed for modeling the behavior of these solid particles within the flow of molten glass in the melter.

Pokorny, Richard; Rice, Jarrett A.; Crum, Jarrod V.; Schweiger, Michael J.; Hrma, Pavel R.

2013-07-24T23:59:59.000Z

352

Frostbite Theater - Liquid Nitrogen Experiments - Dry Ice vs. Liquid  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Egg + Liquid Nitrogen + Time-lapse! Egg + Liquid Nitrogen + Time-lapse! Previous Video (Egg + Liquid Nitrogen + Time-lapse!) Frostbite Theater Main Index Next Video (Liquid Nitrogen Cooled Dry Ice in Water!) Liquid Nitrogen Cooled Dry Ice in Water! Dry Ice vs. Liquid Nitrogen! Dry ice is cold. Liquid nitrogen is cold, too. What happens when the two are mixed together? [ Show Transcript ] Announcer: Frostbite Theater presents... Cold Cuts! No baloney! Joanna and Steve: Just science! Joanna: Hi! I'm Joanna! Steve: And I'm Steve! Joanna: Have you ever wondered what happens when you mix dry ice and liquid nitrogen? Steve: Well, we just happen to have a chunk of dry ice left over from when we filmed 'How to Make a Cloud Chamber,' and here at Jefferson Lab, liquid nitrogen flows like water, so we're going to find out!

353

ARM - Publications: Science Team Meeting Documents: Investigation of Ice  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Investigation of Ice Crystal Shapes Using Multi-resolution Techniques Investigation of Ice Crystal Shapes Using Multi-resolution Techniques McFarquhar, Greg University of Illinois Better knowledge of small-scale features from ice crystals are needed to determine their effects on radiation and hence to improve the treatment of clouds in climate models. With the Cloud Particle Imager (CPI) it is now possible to capture ice crystal images with 2.3 μm resolution and 256 gray scales of illumination, providing an unprecedented wealth of information to utilize in the ongoing quest to understand the small scale structure of ice crystals. In this study, we applied wavelet and fractal analysis to CPI images of ice crystals collected in cirrus by the University of North Dakota Citation during the Intensive Observation Period at the Southern

354

STATEMENT OF WORK (SOW) TEMPLATE FOR ICE SUPPORT CONTRACTOR  

Broader source: Energy.gov (indexed) [DOE]

ICE SUPPORT CONTRACTOR ICE SUPPORT CONTRACTOR The template presented below is a Statement of Work (SOW) for services of an ICE Support Contractor for assisting OECM in conducting an ICE. Project and review specific information should be incorporated. Explanatory text appears in italics, while information that should be selected appears in >. The format and contents of this SOW is not compulsory, and the use is at the discretion of the OECM Analysts, tailored as appropriate for the desired contractor support activities. If no contractor support is required, this appendix is not used. Statement of Work for Independent Cost Estimate (ICE) > <ICE (i.e., Alternative Selection and Cost Range (CD-1), Establish

355

Ising model for melt ponds on Arctic sea ice  

E-Print Network [OSTI]

The albedo of melting Arctic sea ice, a key parameter in climate modeling, is determined by pools of water on the ice surface. Recent observations show an onset of pond complexity at a critical area of about 100 square meters, attended by a transition in pond fractal dimension. To explain this behavior and provide a statistical physics approach to sea ice modeling, we introduce a two dimensional Ising model for pond evolution which incorporates ice-albedo feedback and the underlying thermodynamics. The binary magnetic spin variables in the Ising model correspond to the presence of melt water or ice on the sea ice surface. The model exhibits a second-order phase transition from isolated to clustered melt ponds, with the evolution of pond complexity in the clustered phase consistent with the observations.

Ma, Y -P; Golden, K M

2014-01-01T23:59:59.000Z

356

Determination of Reportable Radionuclides for DWPF Sludge Batch 3 (Macrobatch 4)  

SciTech Connect (OSTI)

The Waste Acceptance Product Specifications (WAPS) 1.2 require that ''The Producer shall report the inventory of radionuclides (in Curies) that have half-lives longer than 10 years and that are, or will be, present in concentrations greater than 0.05 percent of the total inventory for each waste type indexed to the years 2015 and 3115''. As part of the strategy to meet WAPS 1.2, the Defense Waste Processing Facility (DWPF) will report for each waste type, all radionuclides (with half-lives greater than 10 years) that have concentrations greater than 0.01 percent of the total inventory from time of production through the 1100 year period from 2015 through 3115. The initial listing of radionuclides to be included is based on the design-basis glass as identified in the Waste Form Compliance Plan (WCP) and Waste Form Qualification Report (WQR). However, it is required that this list be expanded if other radionuclides with half-lives greater than 10 years are identified that meet the greater than 0.01% criterion for Curie content. Specification 1.6 of the WAPS, IAEA Safeguards Reporting for HLW, requires that the ratio by weights of the following uranium and plutonium isotopes be reported: U-233, U-234, U-235, U-236, U-238, Pu-238, Pu-239, Pu-240, Pu-241, and Pu-242. Therefore, the complete set of reportable radionuclides must also include this set of U and Pu isotopes. The Defense Waste Processing Facility (DWPF) is receiving radioactive sludge slurry from High Level Waste Tank 40. The radioactive sludge slurry in Tank 40 is a blend of the previous contents of Tank 40 (Sludge Batch 2) and the sludge that was transferred to Tank 40 from Tank 51. The blend of sludge from Tank 51 and Tank 40 defines Macrobatch 4 (also referred to as Sludge Batch 3). This report develops the list of reportable radionuclides and associated activities and determines the radionuclide activities as a function of time. The DWPF will use this list and the activities as one of the inputs for the development of the Production Records that relate to radionuclide inventory. This work was initiated through Task Technical Request HLW/DWPF/TTR-03-0005, Revision 1 entitled Sludge Batch 3 SRTC Shielded Cells Testing. Specifically, this report details results from performing, in part, Subtask 3 of the TTR and, in part, meets Deliverable 6 of the TTR. The work was performed following the Technical Task and Quality Assurance Plan (TTQAP), WSRC-RP-2003-00249, Rev. 1 and Analytical Study Plan (ASP), WSRC-RP-2004-00262. In order to determine the reportable radionuclides for Sludge Batch 3 (Macro Batch 4), a list of radioisotopes that may meet the criteria as specified by the Department of Energy's (DOE) WAPS was developed. All radioactive U-235 fission products and all radioactive activation products that could be in the SRS HLW were considered. In addition, all U and Pu isotopes identified in WAPS 1.6 were included in the list. This list was then evaluated and some isotopes excluded from the projection calculations.

Bannochie, C

2005-05-01T23:59:59.000Z

357

IceCube Project Monthly Report August 2005  

E-Print Network [OSTI]

IceCube Project Monthly Report August 2005 Accomplishments All of the DOMs installed at the South additional emphasis on training and procedures. The training program for IceCube personnel scheduled to work-05 S-05 O-05 N-05 D-05 J-06 F-06 M-06 3&4 FY06 FY07 FY08 FY09 FY10 FY11 IceCube Project Baseline

Saffman, Mark

358

ICE CORES | History of Research, Greenland and Antarctica  

Science Journals Connector (OSTI)

Abstract Ice samples collected from polar ice sheets have been used to study past climate changes going almost as far back as 1My. The first ice core projects in the 1960s identified major climate transitions. Subsequent projects have shown that abrupt climate changes have occurred many times in the past and that there is a close link between high levels of atmospheric carbon dioxide and warm climate conditions.

M. Aydin

2013-01-01T23:59:59.000Z

359

ICE CORES | History of Research, Greenland and Antarctica  

Science Journals Connector (OSTI)

Ice samples collected from the polar ice sheets have been used to study past climate changes during the last million years. The first ice-core projects in the 1960s identified the major climate periods. Subsequent projects have shown that abrupt climate changes have occurred many times in the past and that there is a close link between high levels of atmospheric carbon dioxide and warm climate conditions.

K. Taylor

2007-01-01T23:59:59.000Z

360

Analytical determination of propeller performance degradation due to ice accretion  

E-Print Network [OSTI]

trajectory code. Unlike the Bragg code, the effects of compressibility, kinetic heating, and water runback are taken into account in this code, thus making it applicable to both rime and glaze ice conditions. Designed to be applied to helicopter config...- ' urations, the code employs a heat balance analysis to calculate the kinetic heating and runback effects. The authors have reported good agreement between predicted and experimentally obtained ice shapes, tem- perature distributions, and icing threshold...

Miller, Thomas Lloyd

1984-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Argonne Lab Director Peter Littlewood accepts Ice Bucket Challenge...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Argonne Lab Director Peter Littlewood accepts Ice Bucket Challenge Share Browse By - Any - Energy -Energy efficiency --Vehicles ---Alternative fuels ---Automotive engineering...

362

Optimal Control of Harvesting Ice Thermal Storage Systems  

E-Print Network [OSTI]

for optimal control of a harvesting ice storage system. A simplified procedure is used to develop 24 hour load data. Example installations will be shown....

Knebel, D. E.

1988-01-01T23:59:59.000Z

363

Heterogeneous ice nucleation and water uptake by field-collected...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

properties through heterogeneous nucleation is not well understood. Heterogeneous ice nucleation and water uptake by ambient particles collected from urban environments in...

364

Ice structure monitoring with an optical fiber sensing system  

Science Journals Connector (OSTI)

Ice has been used as an effective and economical material for constructions of roads and platforms in cold regions. However, the practical applications of this brittle material are limited by the fact that ice structures can suddenly crack due to low tensile strength, be crushed due to excessive compression, melt and become soften as temperature elevates. In this paper, an early warning system is proposed to monitor the strain state and damage characteristic of ice structures. Firstly, both fiber Bragg grating (FBG) and Brillouin optical time domain analysis/reflectometry (BOTDA/R) sensors were installed in an ice block and an ice beam to understand their axial and flexural behaviors under a concentrated load. Secondly, the solution for strain state and damage process of ice structures was derived analytically under test conditions. Finally, an outdoor ice road test bed was built and continuously monitored for 34h to validate the early warning system and understand the early stage behavior of ice structures. The experimental results agreed well with their corresponding theoretical predictions. The early warning system with optical sensors is effective and practical for long-term monitoring for ice structures.

Zhi Zhou; Minghua Huang; Jianping He; Genda Chen; Jinping Ou

2010-01-01T23:59:59.000Z

365

ARM-UAV TWP-ICE Activities and Data  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

instrument operational status, data availability and daily flight details for the ARM-UAV Proteus payload flown during the TWP-ICE experiment are presented. Data was also...

366

Covered Product Category: Air-Cooled Ice Machines  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) provides acquisition guidance for air-cooled ice machines, which are covered by the ENERGY STAR program.

367

IceCube: A Cubic Kilometer Radiation Detector  

SciTech Connect (OSTI)

IceCube is a 1 km{sup 3} neutrino detector now being built at the Amudsen-Scott South Pole Station. It consists of 4800 Digital Optical Modules (DOMs) which detect Cherenkov radiation from the charged particles produced in neutrino interactions. IceCube will observe astrophysical neutrinos with energies above about 100 GeV. IceCube will be able to separate {nu}{sub {mu}}, {nu}{sub t}, and {nu}{sub {tau}} interactions because of their different topologies. IceCube construction is currently 50% complete.

IceCube Collaboration; Klein, Spencer R; Klein, S.R.

2008-06-01T23:59:59.000Z

368

Sandia National Laboratories: Ice-Sheet Simulation Code Matures...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Antarctic Ice Sheets, with particular attention to their contributions to global sea-level rise. Our recent highlight is the successful completion of a controlled mesh...

369

Team advances understanding of the Greenland Ice Sheet's meltwater...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for Greenland in the future, but its impact on ice sheet flux and associated sea level rise is uncertain: direct observations of the subglacial drainage system are lacking...

370

Reducing uncertainty in high-resolution sea ice models.  

SciTech Connect (OSTI)

Arctic sea ice is an important component of the global climate system, reflecting a significant amount of solar radiation, insulating the ocean from the atmosphere and influencing ocean circulation by modifying the salinity of the upper ocean. The thickness and extent of Arctic sea ice have shown a significant decline in recent decades with implications for global climate as well as regional geopolitics. Increasing interest in exploration as well as climate feedback effects make predictive mathematical modeling of sea ice a task of tremendous practical import. Satellite data obtained over the last few decades have provided a wealth of information on sea ice motion and deformation. The data clearly show that ice deformation is focused along narrow linear features and this type of deformation is not well-represented in existing models. To improve sea ice dynamics we have incorporated an anisotropic rheology into the Los Alamos National Laboratory global sea ice model, CICE. Sensitivity analyses were performed using the Design Analysis Kit for Optimization and Terascale Applications (DAKOTA) to determine the impact of material parameters on sea ice response functions. Two material strength parameters that exhibited the most significant impact on responses were further analyzed to evaluate their influence on quantitative comparisons between model output and data. The sensitivity analysis along with ten year model runs indicate that while the anisotropic rheology provides some benefit in velocity predictions, additional improvements are required to make this material model a viable alternative for global sea ice simulations.

Peterson, Kara J.; Bochev, Pavel Blagoveston

2013-07-01T23:59:59.000Z

371

Microsoft PowerPoint - S08-06_Peters_Result of Salt Batch Qualifications.ppt  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Salt Batch Qualification Testing Salt Batch Qualification Testing Tom Peters, Samuel Fink; E&CPT Research Programs, Savannah River National Laboratory Mark Geeting, Steven Brown, David Martin, Brent Gifford; Tank Farm Engineering, Savannah River Remediation November 17, 2010 SRNL-MS-2010-00250 Print Close 2 This presentation..... Results of Salt Batch Qualification Testing * Describes the Integrated Salt Disposition Project (ISDP), the newest operating facilities at the Savannah River Site for treating stored radioactive waste. * Reviews the past campaigns of salt disposition (Macrobatch 1 and 2). * Reviews current operations (Macrobatch 3) * Outlines the next qualification (Macrobatch 4) * Discusses the limiters in operations. Print Close 3 Introduction In 2001, the Department of Energy (DOE) identified Caustic-Side Solvent

372

Verification Of The Defense Waste Processing Facility's (DWPF) Process Digestion Methods For The Sludge Batch 8 Qualification Sample  

SciTech Connect (OSTI)

This report contains the results and comparison of data generated from inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis of Aqua Regia (AR), Sodium Peroxide/Sodium Hydroxide Fusion Dissolution (PF) and Cold Chem (CC) method digestions and Cold Vapor Atomic Absorption analysis of Hg digestions from the DWPF Hg digestion method of Sludge Batch 8 (SB8) Sludge Receipt and Adjustment Tank (SRAT) Receipt and SB8 SRAT Product samples. The SB8 SRAT Receipt and SB8 SRAT Product samples were prepared in the SRNL Shielded Cells, and the SRAT Receipt material is representative of the sludge that constitutes the SB8 Batch or qualification composition. This is the sludge in Tank 51 that is to be transferred into Tank 40, which will contain the heel of Sludge Batch 7b (SB7b), to form the SB8 Blend composition.

Click, D. R.; Edwards, T. B.; Wiedenman, B. J.; Brown, L. W.

2013-03-18T23:59:59.000Z

373

A new ice thickness and bedrock data set for the Greenland ice sheet. R.L. Layberry, J.L. Bamber,  

E-Print Network [OSTI]

combined with data collected by the Technical University of Denmark in the 1970's to produce a new iceA new ice thickness and bedrock data set for the Greenland ice sheet. R.L. Layberry, J.L. Bamber of Kansas, Lawrence, KS 66045, 785/864-2700, U.S. Abstract - Ice thickness data collected between 1993

Kansas, University of

374

Integrated tephrochronology of the West Antarctic region-Implications for a potential tephra record in the West Antarctic Ice Sheet (WAIS) Divide Ice Core  

E-Print Network [OSTI]

(tephra) and aerosols , produced during major explosive eruptions. Tephra layers in ice cores can provide record in the West Antarctic Ice Sheet (WAIS) Divide Ice Core N.W. Dunbar,1 W.C. McIntosh,1 A.V. Kurbatov@albion.edu) Ice cores from polar regions, in addition to being a climate archives, also capture volcanic particles

Dunbar, Nelia W.

375

Energy Conservation Standards for Automatic Commercial Ice Makers: Public Meeting and Availability of the Preliminary Technical Support Document  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

VerDate Mar2010 16:35 Jan 23, 2012 VerDate Mar<15>2010 16:35 Jan 23, 2012 Jkt 226001 PO 00000 Frm 00005 Fmt 4702 Sfmt 4702 E:\FR\FM\24JAP1.SGM 24JAP1 srobinson on DSK4SPTVN1PROD with PROPOSALS 3404 Federal Register / Vol. 77, No. 15 / Tuesday, January 24, 2012 / Proposed Rules (5) Totaling the results in section 12(b)(4); (6) Subtracting the total in section 12(b)(5) from the total in section 12(b)(3); and (7) Multiplying the result in section 12(b)(6) by your share. Example: You have a 100 percent share in one basic unit with 10 acres of fresh peaches and 5 acres of processing peaches designated on your acreage report, with a 300 bushel per acre production guarantee for both fresh and processing peaches, and you select 100 percent of the price election of $15.50 per bushel for fresh peaches and $6.50 per bushel

376

Modeling the High-Frequency Component of Arctic Sea Ice Drift and Deformation  

Science Journals Connector (OSTI)

Buoy observations of sea ice drift show that sea ice motion and deformation contain substantial high-frequency variability at subdaily timescales. However, numerical simulations of the sea ice dynamics normally do not include processes on such ...

Petra Heil; William D. Hibler III

2002-11-01T23:59:59.000Z

377

E-Print Network 3.0 - aircraft icing training Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: effects on aircraft performance. Although anti-icing devices such as de-icing boots and heating strips... help, ice accretions can still build up and affect the aircraft...

378

Fractionation of Dissolved Solutes and Chromophoric Dissolved Organic Matter During Experimental Sea Ice Formation.  

E-Print Network [OSTI]

In the past decade there has been an overall decrease in Arctic Ocean sea ice cover. Changes to the ice cover have important consequences for organic carbon cycling, especially over the continental shelves. When sea ice is formed, dissolved organic...

Smith, Stephanie 1990-

2012-04-16T23:59:59.000Z

379

Dynamics of ice shelf rift propagation and iceberg calving inferred from geodetic and seismic observations  

E-Print Network [OSTI]

ice at the base of the ice shelf could produce a thicknessthat may produce larger amounts of marine ice near one riftice shelf com- bined with large Antarctic storm systems can produce

Bassis, Jeremy N.

2007-01-01T23:59:59.000Z

380

Markov Random Field Based Automatic Image Alignment for ElectronTomography  

SciTech Connect (OSTI)

Cryo electron tomography (cryo-ET) is the primary method for obtaining 3D reconstructions of intact bacteria, viruses, and complex molecular machines ([7],[2]). It first flash freezes a specimen in a thin layer of ice, and then rotates the ice sheet in a transmission electron microscope (TEM) recording images of different projections through the sample. The resulting images are aligned and then back projected to form the desired 3-D model. The typical resolution of biological electron microscope is on the order of 1 nm per pixel which means that small imprecision in the microscope's stage or lenses can cause large alignment errors. To enable a high precision alignment, biologists add a small number of spherical gold beads to the sample before it is frozen. These beads generate high contrast dots in the image that can be tracked across projections. Each gold bead can be seen as a marker with a fixed location in 3D, which provides the reference points to bring all the images to a common frame as in the classical structure from motion problem. A high accuracy alignment is critical to obtain a high resolution tomogram (usually on the order of 5-15nm resolution). While some methods try to automate the task of tracking markers and aligning the images ([8],[4]), they require user intervention if the SNR of the image becomes too low. Unfortunately, cryogenic electron tomography (or cryo-ET) often has poor SNR, since the samples are relatively thick (for TEM) and the restricted electron dose usually results in projections with SNR under 0 dB. This paper shows that formulating this problem as a most-likely estimation task yields an approach that is able to automatically align with high precision cryo-ET datasets using inference in graphical models. This approach has been packaged into a publicly available software called RAPTOR-Robust Alignment and Projection estimation for Tomographic Reconstruction.

Moussavi, Farshid; Amat, Fernando; Comolli, Luis R.; Elidan, Gal; Downing, Kenneth H.; Horowitz, Mark

2007-11-30T23:59:59.000Z

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

ANALYSIS OF DWPF SLUDGE BATCH 7A (MACROBATCH 8) POUR STREAM SAMPLES  

SciTech Connect (OSTI)

The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 7a (SB7a), also referred to as Macrobatch 8 (MB8), in June 2011. SB7a is a blend of the heel of Tank 40 from Sludge Batch 6 (SB6) and the SB7a material that was transferred to Tank 40 from Tank 51. SB7a was processed using Frit 418. During processing of each sludge batch, the DWPF is required to take at least one glass sample to meet the objectives of the Glass Product Control Program (GPCP), which is governed by the DWPF Waste Compliance Plan, and to complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. Three pour stream glass samples and two Melter Feed Tank (MFT) slurry samples were collected while processing SB7a. These additional samples were taken during SB7a to understand the impact of antifoam and the melter bubblers on glass redox chemistry. The samples were transferred to the Savannah River National Laboratory (SRNL) where they were analyzed. The following conclusions were drawn from the analytical results provided in this report: (1) The sum of oxides for the official SB7a pour stream glass is within the Product Composition Control System (PCCS) limits (95-105 wt%). (2) The average calculated Waste Dilution Factor (WDF) for SB7a is 2.3. In general, the measured radionuclide content of the official SB7a pour stream glass is in good agreement with the calculated values from the Tank 40 dried sludge results from the SB7a Waste Acceptance Program Specification (WAPS) sample. (3) As in previous pour stream samples, ruthenium and rhodium inclusions were detected by Scanning Electron Microscopy-Electron Dispersive Spectroscopy (SEM-EDS) in the official SB7a pour stream sample. (4) The Product Consistency Test (PCT) results indicate that the official SB7a pour stream glass meets the waste acceptance criteria for durability with a normalized boron release of 0.64 g/L, which is an order of magnitude less than the Environmental Assessment (EA) glass. (5) The measured density of the SB7a pour stream glass was 2.7 g/cm{sup 3}. (6) The Fe{sup 2+}/{Sigma}Fe ratios of the SB7a pour stream samples were in the range of 0.04-0.13, while the MFT sample glasses prepared by SRNL were in the range of 0.02-0.04.

Johnson, F.

2012-05-01T23:59:59.000Z

382

Analysis Of The Sludge Batch 7b (Macrobatch 9) DWPF Pour Stream Glass Sample  

SciTech Connect (OSTI)

The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 7b (SB7b), also referred to as Macrobatch 9 (MB9), in January 2012. SB7b is a blend of the heel of Tank 40 from Sludge Batch 7a (SB7a) and the SB7b material that was transferred to Tank 40 from Tank 51. SB7b was processed using Frit 418. During processing of each sludge batch, the DWPF is required to take at least one glass sample to meet the objectives of the Glass Product Control Program (GPCP), which is governed by the DWPF Waste Form Compliance Plan, and to complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. Two pour stream glass samples were collected while processing SB7b. The samples were transferred to the Savannah River National Laboratory (SRNL) where one was analyzed and the other was archived. The following conclusions were drawn from the analytical results provided in this report: The sum of oxides for the official SB7b pour stream glass is within the Product Composition Control System (PCCS) limits (95-105 wt%); The average calculated Waste Dilution Factor (WDF) for SB7b is 2.3. In general, the measured radionuclide content of the official SB7b pour stream glass is in good agreement with the calculated values from the Tank 40 dried sludge results from the SB7b Waste Acceptance Program Specification (WAPS) sample; As in previous pour stream samples, ruthenium and rhodium inclusions were detected by Scanning Electron Microscopy-Electron Dispersive Spectroscopy (SEM-EDS) in the SB7b pour stream sample; The Product Consistency Test (PCT) results indicate that the official SB7b pour stream glass meets the waste acceptance criteria for durability with a normalized boron release of 0.8 g/L, which is an order of magnitude less than the Environmental Assessment (EA) glass; The measured density of the SB7b pour stream glass was 2.70 g/cm{sup 3}; The Fe{sup 2+}/?Fe ratio of the SB7b pour stream samples was 0.07.

Johnson, F. C.; Crawford, C. L.; Pareizs, J. M.

2013-11-18T23:59:59.000Z

383

ANALYSIS OF DWPF SLUDGE BATCH 6 (MACROBATCH 7) POUR STREAM GLASS SAMPLES  

SciTech Connect (OSTI)

The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 6 (SB6), also referred to as Macrobatch 7 (MB7), in June 2010. SB6 is a blend of the heel of Tank 40 from Sludge Batch 5 (SB5), H-Canyon Np transfers and SB6 that was transferred to Tank 40 from Tank 51.1 SB6 was processed using Frit 418. Sludge is received into the DWPF Chemical Processing Cell (CPC) and is processed through the Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator Tank (SME). The treated sludge slurry is then transferred to the Melter Feed Tank (MFT) and fed to the melter. During processing of each sludge batch, the DWPF is required to take at least one glass sample to meet the objectives of the Glass Product Control Program (GPCP) and to complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. The DWPF requested various analyses of radioactive glass samples obtained from the melter pour stream during processing of SB6 as well as reduction/oxidation (REDOX) analysis of MFT samples to determine the impact of Argon bubbling. Sample analysis followed the Task Technical and Quality Assurance Plan (TTQAP) and an Analytical Study Plan (ASP). Four Pour Stream (PS) glass samples and two MFT slurry samples were delivered to the Savannah River National Laboratory (SRNL) from the DWPF. Table 1-1 lists the sample information for each pour stream glass sample. SB6 PS3 (S03472) was selected as the official pour stream sample for SB6 and full analysis was requested. This report details the visual observations of the as-received SB6 PS No.3 glass sample as well as results for the chemical composition, Product Consistency Test (PCT), radionuclide content, noble metals, and glass density. REDOX results will be provided for all four pour stream samples and vitrified samples of MFT-558 and MFT-568A. Where appropriate, data from other pour stream samples will be provided.

Johnson, F.

2012-01-20T23:59:59.000Z

384

Towards Fully Automatic Placement of Security Sanitizers and Declassifiers  

E-Print Network [OSTI]

in this space has focused on finding missing sanitizers and was performed on relatively small ap- plicationsTowards Fully Automatic Placement of Security Sanitizers and Declassifiers Benjamin Livshits Fully Automatic Placement of Security Sanitizers and Declassifiers Benjamin Livshits Microsoft Research

Livshits, Ben

385

TR-IIS-07-002 Automatic Derivation of  

E-Print Network [OSTI]

TR-IIS-07-002 Automatic Derivation of Compositional Rules in Automated Compositional Reasoning Bow-Yaw://www.iis.sinica.edu.tw/LIB/TechReport/tr2007/tr07.html #12;AUTOMATIC DERIVATION OF COMPOSITIONAL RULES IN AUTOMATED COMPOSITIONAL REASONING BOW-YAW algorithm. Consider, for example, the following assume-guarantee rule where M |= P denotes that the system M

Chen, Sheng-Wei

386

Automatic Design Exploration Framework for Multicores with Reconfigurable Accelerators  

E-Print Network [OSTI]

Automatic Design Exploration Framework for Multicores with Reconfigurable Accelerators Cecilia Gonz of multicores with application-specific reconfigurable accelerators. The design exploration is a multi-step flow that performs au- tomatic generation of fine-grained accelerators, automatic parallelization, and testing

Kasahara, Hironori

387

Semi-Automatic Image Annotation Using Event and Torso Identification  

E-Print Network [OSTI]

Semi-Automatic Image Annotation Using Event and Torso Identification Bongwon Suh, Benjamin B. Bulk annotation, where multiple images are annotated at once, is a desired feature for image management for automatically creating meaningful image clusters for efficient bulk annotation. These techniques are not perfect

Golbeck, Jennifer

388

The automatic generation of mutation operators for genetic algorithms  

Science Journals Connector (OSTI)

We automatically generate mutation operators for Genetic Algorithms (GA) and tune them to problem instances drawn from a given problem class. By so doing, we perform metalearning in which the base-level contains GAs (which learn about problem instances), ... Keywords: automatic design, genetic algorithms, genetic programming, hyper-heuristics

John R. Woodward; Jerry Swan

2012-07-01T23:59:59.000Z

389

Improving API Usage through Automatic Detection of Redundant Code  

E-Print Network [OSTI]

Improving API Usage through Automatic Detection of Redundant Code David Kawrykow and Martin P Programming Interfaces (APIs). We have observed many cases where APIs are used in ways that are not the most effective. We developed a technique and tool support to automatically detect such patterns of API usage

Robillard, Martin

390

IPSJ SIG Technical Report Automatic parallelization with OSCAR API Analyzer  

E-Print Network [OSTI]

IPSJ SIG Technical Report Automatic parallelization with OSCAR API Analyzer: a cross have devel- oped the OSCAR API Analyzer. It allows programs automatically parallelized by the OSCAR compiler with OSCAR API directives to target many different platforms using just sequential compilers. We

Kasahara, Hironori

391

Automatic Fracture Reduction Thomas Albrecht and Thomas Vetter  

E-Print Network [OSTI]

Automatic Fracture Reduction Thomas Albrecht and Thomas Vetter University of Basel Abstract. We segmented from CT scans. The result of this virtual fracture reduction is intended to be used an operation plan. We propose to achieve automatic fracture reduction by fitting the bone fragments

Vetter, Thomas

392

Character String Predicate Based Automatic Software Test Data Generation  

E-Print Network [OSTI]

Character String Predicate Based Automatic Software Test Data Generation Ruilian Zhao Computer is an important element in programming. A problem that needs further research is how to automatically generate generation of program paths including character string predicates, and the effectiveness of this approach

Lyu, Michael R.

393

A New Approach for Exploring Ice Sheets and Sub-Ice Geology  

E-Print Network [OSTI]

-velocity gradient in the surface layer. The boreholes are drilled by different techniques, requiring considerable in controlling ice dynam- ics and is largely determined by the pres- ence of water and/or sediments underneath Geological Drilling (ANDRILL)). Nev- ertheless, the available literature demon- strates that seismic studies

Kristoffersen, Yngve

394

The Little Ice Age as Recorded in the Stratigraphy of the Tropical Quelccaya Ice Cap  

Science Journals Connector (OSTI)

...1500-YEAR RECORD OF TROPICAL PRECIPITATION IN ICE CORES FROM THE...values associated with winter snowfall (5). Sum-mer...During the eruptive phase, 19 February to 6 March...than 80% ofthe annual precipitation falls in the wet season...analysis, K. Doddroe for typing and R. Tope for the...

L. G. THOMPSON; E. MOSLEY-THOMPSON; W. DANSGAARD; P. M. GROOTES

1986-10-17T23:59:59.000Z

395

MCS researchers coedit proceedings on automatic differentiation | Argonne  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

MCS researchers coedit proceedings on automatic differentiation MCS researchers coedit proceedings on automatic differentiation July 22, 2013 Tweet EmailPrint The fundamental goal behind differentiating numerical computations is to be able to generate - ideally automatically - efficient derivative code for models implemented as computer programs. Achieving this goal in practice has proved challenging, especially for numerical models on parallel architectures. To track the progress in addressing the challenges, and to present the state of the art in automatic differentiation (AD), every four years the scientific community holds a conference focusing on AD applications in science and engineering, its theory, and the development of compiler-based tools and web-based differentiation services. The Sixth International Conference on Automatic Differentiation (AD2012) held in Fort Collins,

396

Probing leptoquark production at IceCube  

Science Journals Connector (OSTI)

We emphasize the inelasticity distribution of events detected at the IceCube neutrino telescope as an important tool for revealing new physics. This is possible because the unique energy resolution at this facility allows to separately assign the energy fractions for emergent muons and taus in neutrino interactions. As a particular example, we explore the possibility of probing second and third generation leptoquark parameter space (coupling and mass). We show that production of leptoquarks with masses ?250??GeV and diagonal generation couplings of O(1) can be directly tested if the cosmic neutrino flux is at the Waxman-Bahcall level.

Luis A. Anchordoqui; Carlos A. Garca Canal; Haim Goldberg; Daniel Gomez Dumm; Francis Halzen

2006-12-29T23:59:59.000Z

397

Automatic identification of abstract online groups  

DOE Patents [OSTI]

Online abstract groups, in which members aren't explicitly connected, can be automatically identified by computer-implemented methods. The methods involve harvesting records from social media and extracting content-based and structure-based features from each record. Each record includes a social-media posting and is associated with one or more entities. Each feature is stored on a data storage device and includes a computer-readable representation of an attribute of one or more records. The methods further involve grouping records into record groups according to the features of each record. Further still the methods involve calculating an n-dimensional surface representing each record group and defining an outlier as a record having feature-based distances measured from every n-dimensional surface that exceed a threshold value. Each of the n-dimensional surfaces is described by a footprint that characterizes the respective record group as an online abstract group.

Engel, David W; Gregory, Michelle L; Bell, Eric B; Cowell, Andrew J; Piatt, Andrew W

2014-04-15T23:59:59.000Z

398

Pressurized fluidized-bed hydroretorting of Indiana New Albany shale in batch and continuous units  

SciTech Connect (OSTI)

Work is being conducted at the Institute of Gas Technology (IGT) to develop a pressurized fluidized-bed hydroretorting (PFH) process for the production of oil from Eastern oil shales. The PFH process, using smaller particle sizes than the moving-bed hydroretorting process, offers higher oil yields and greater reactor mass fluxes through higher selectivity of organic carbon to oil and shorter residence times, respectively. Batch PFH tests have been conducted to study the effects of shale preheat time (15 to 30 min) and temperature (25{degree} to 320{degree}C), retorting temperature (450{degree} to 710{degree}C), hydrogen pressure (2.8 to 7.0 MPa), particle size (65 to 330 microns), and residence time (5 to 30 min) on the product yields from Indiana New Albany shale. Oil yield has been found to increase with increasing hydrogen pressure. Results are discussed. 10 refs., 14 figs., 3 tabs.

Roberts, M.J.; Rue, D.M.; Lau, F.S. (Institute of Gas Technology, Chicago, IL (USA)); Roosmagi, C. (USDOE Laramie Energy Technology Center, WY (USA))

1989-01-01T23:59:59.000Z

399

Correction of Wall Adhesion Effects in Batch Settling of Strong Colloidal Gels  

E-Print Network [OSTI]

The batch settling test is widely used to estimate the compressive rheology of strongly flocculated colloidal suspensions, in particular the compressive yield strength and hydraulic permeability. Recently it has been discovered that wall adhesion effects in these tests may be significantly greater than previously appreciated, which can introduce unbounded errors in the estimation of these rheological functions. Whilst a methodology to solve the underlying static problem and correct for wall adhesion effects has been developed, this method is quite complex and unwieldy, involving solution of a 2D hyper-elastic constitutive model for strong colloidal gels. In this paper we develop a highly simplified 1D visco-plastic approximation to the hyper-elastic model which admits analytic expressions for the equilibrium solids concentration profile and bed height. These expressions facilitate robust estimation of the compressive yield and wall adhesion strength via nonlinear regression of experimental data in the presence of small measurement errors.

Daniel R. Lester; Richard Buscall

2014-09-30T23:59:59.000Z

400

Characterisation and Evaluation of Wastes for Treatment in the Batch Pyrolysis Plant in Studsvik, Sweden - 13586  

SciTech Connect (OSTI)

The new batch pyrolysis plant in Studsvik is built primarily for treatment of uranium containing dry active waste, 'DAW'. Several other waste types have been identified that are considered or assumed suitable for treatment in the pyrolysis plant because of the possibility to carefully control the atmosphere and temperature of the thermal treatment. These waste types must be characterised and an evaluation must be made with a BAT perspective. Studsvik have performed or plan to perform lab scale pyrolysis tests on a number of different waste types. These include: - Pyrophoric materials (uranium shavings), - Uranium chemicals that must be oxidised prior to being deposited in repository, - Sludges and oil soaks (this category includes NORM-materials), - Ion exchange resins (both 'free' and solidified/stabilised), - Bitumen solidified waste. Methodology and assessment criteria for various waste types, together with results obtained for the lab scale tests that have been performed, are described. (authors)

Lindberg, Maria; Oesterberg, Carl; Vernersson, Thomas [Studsvik Nuclear AB, Studsvik Nuclear AB, 611 82 Nykoeping (Sweden)] [Studsvik Nuclear AB, Studsvik Nuclear AB, 611 82 Nykoeping (Sweden)

2013-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

The first Greenland ice core record of methanesulfonate and sulfate over a full glacial cycle  

E-Print Network [OSTI]

sulf,te in the Dye 3 and Camp Century, Greenland ice cores,in both the Dye 3 and Camp Century deep ice cores [Herron

Hansson, Margareta E; Saltzman, Eric S

1993-01-01T23:59:59.000Z

402

Experimental Investigation of Energy Losses due to Icing of a Wind Turbine  

Science Journals Connector (OSTI)

Ice accretion and irregular shedding cause many potential problems during turbine operation. For example, icing causes large load imbalances; creates excessive turbine vibration; can change the natural frequen...

Xin Wang; Eric L. Bibeau

2007-01-01T23:59:59.000Z

403

Investigation of how Insulation affects the pipe system in the soil for ice rinks.  

E-Print Network [OSTI]

?? In Sweden, ice rinks are one of the largest energy consumers in the public building sector, requiring, each ice rink, about 1050 MWh/year, from (more)

Marco Estruc, Ignacio

2014-01-01T23:59:59.000Z

404

Validity of batch sorption data to describe selenium transport through unsaturated tuff  

SciTech Connect (OSTI)

As part of project for characterizing Yucca Mt. as a potential site for high-level nuclear waste respository, we used UFA {trademark} technology (centifuge-induced flow) to directly measure selenite retardation coefficients and hydraulic conductivity under unsaturated conditions on two tuff samples from Yucca Mt. Retardation factor for the selenite species was 2.5 in both Yucca Mt. vitric tuff at 62.6% saturation and zeolitic nonwelded tuff from G-tunnel at 52.8% saturation. For these column experiments, we prepared a solution, using J-13 well water from NTS, with a Se conc. of 1.31 mg/L(ppM). The retardation factor of 2.5 measured for both tuffs translates into a sorption distribution coefficient K{sub d} of 0.9 mL/g for the vitric tuff and 0.8 mL/g for the zeolitic tuff. For batch sorption experiments, using the same zeolitic tuff as for the column experiments and solutions of J-13 well water with a Se conc. of 1.1 mg/L(ppM), the average K{sub d} was determined to be 0.1{+-}0.2 mL/g. Given the small K{sub d} values for Se sorption, general agreement between batch and column measurements (obtained under unsaturated conditions) was observed. Unsaturated hydraulic conductivities during the experiments were 2.5x10{sup -8} cm/s for the Yucca Mt. vitric tuff and 1.2x10{sup -8} cm/s for the zeolitic nonwelded tuff from G- tunnel.

Conca, J.L. [Tri-Cities Univ. Center, Richland, WA (United States); Triay, I.R.

1996-08-01T23:59:59.000Z

405

Multispectral imaging contributions to global land ice measurements from space  

E-Print Network [OSTI]

, Germany j National Snow and Ice Data Center, University of Colorado, 449 UCB, Boulder, CO 80309, USA k development by GLIMS is geared toward mapping clean- ice and debris-covered glaciers; terrain classification are compatible with and expanded from those of the World Glacier Inventory (WGI). These technology efforts

Kääb, Andreas

406

IceCube Project Monthly Report September 2005  

E-Print Network [OSTI]

IceCube Project Monthly Report September 2005 Accomplishments All of the IceCube Digital Optical the long- term project goals of 90% first pass yield and 95% ultimate yield. The additional data handling at the Pole and one at McMurdo. The drilling procedures are nearing completion. A final review and sign

Saffman, Mark

407

Gravitational Separation of Gases and Isotopes in Polar Ice Caps  

Science Journals Connector (OSTI)

...reported that 02 trapped in 2000-year-old ice from Camp Century, Green-land, has an 180/160 enrichment given by...values for 02 in 6,100-and 20,000-year-old Camp Century ice (1), and noting that mean seawater was enriched...

H. Craig; Y. Horibe; T. Sowers

1988-12-23T23:59:59.000Z

408

Increase of Atmospheric Methane Recorded in Antarctic Ice Core  

Science Journals Connector (OSTI)

...obtained by Rasmussen and Khalil with ice samples from Camp Century (77011'N, 61009'W), Crete (71 07'N, 37 19'W...however, this difference is 130 years for ice from Camp Century, 200 years for Crete, and 240 years for Byrd Station...

B. STAUFFER; G. FISCHER; A. NEFTEL; H. OESCHGER

1985-09-27T23:59:59.000Z

409

Floating Glacial Ice Caps in the Arctic Ocean  

Science Journals Connector (OSTI)

...obtained from isotopic studies of the Camp Century ice core. The second is based...obtained from isotopic studies of the Camp Century ice core. The second is based...Arctic Ocean Arctic region benthonic Camp Century Cenozoic cores deep-sea evidence...

Wallace S. Broecker

1975-06-13T23:59:59.000Z

410

Proton ordering in tetragonal and monoclinic H2O ice  

E-Print Network [OSTI]

H2O ice remains one of the most enigmatic materials as its phase diagram reveals up to sixteen solid phases. While the crystal structure of these phases has been determined, the phase boundaries and mechanisms of formation of the proton-ordered phases remain unclear. From high precision measurements of the complex dielectric constant, we probe directly the degree of ordering of the protons in H2O tetragonal ice III and monoclinic ice V down to 80 K. A broadened first-order phase transition is found to occur near 202 K we attribute to a quenched disorder of the protons which causes a continuous disordering of the protons during cooling and metastable behavior. At 126 K the protons in ice III become fully ordered, and for the case of ice V becoming fully ordered at 113 K forming ice XIII. Two triple points are proposed to exist: one at 0.35 GPa and 126 K where ices III, IX and V coexist; and another at 0.35 GPa and 113 K where ices V, IX and XIII coexist. Our findings unravel the underlying mechanism driving th...

Yen, Fei; Berlie, Adam; Liu, Xiaodi; Goncharov, Alexander F

2015-01-01T23:59:59.000Z

411

Solvent Selection Use dry ice/isopropanol for cooling baths  

E-Print Network [OSTI]

Solvent Selection Use dry ice/isopropanol for cooling baths Reaches essentially the same temperature as dry ice/acetone (-77°C vs. -78°C), but the lower volatility of isopropanol minimizes vapor a closed-loop cooling system for condensers Closed-loop cooling systems eliminate wastewater and accidental

Chan, Hue Sun

412

Trigonal ice crystals in Earths atmosphere  

Science Journals Connector (OSTI)

We are all familiar with the hexagonal shape of snow and ice crystals, and it is well established that their six-fold symmetry is derived from the arrangement of water molecules in a hexagonal crystal structure. However, atmospheric ice crystals with only ...

Benjamin J. Murray; Christoph G. Salzmann; Andrew J. Heymsfield; Steven Dobbie; Ryan R. Neely--III; Christopher J. Cox

413

IceCube Project Monthly Report -April 2010 Accomplishments  

E-Print Network [OSTI]

1 IceCube Project Monthly Report - April 2010 Accomplishments · The IceCube Software Water Drill equipment (http://www.icecube.wisc.edu/disposition/index.php) and the site was circulated at Uppsala University are using Deep Core DOMs as flashers and receivers for low-intensity flasher runs

Saffman, Mark

414

ENERGY BASED ICE COLLISION FORCES Claude Daley1  

E-Print Network [OSTI]

ENERGY BASED ICE COLLISION FORCES Claude Daley1 1 Memorial University of Newfoundland, St. John's, Newfoundland, Canada A1C 3X5 ABSTRACT Ice collision forces can be determined by energy considerations. A variety of interaction geometry cases are considered. The indentation energy functions for eight different

Daley, Claude

415

ENERGY BASED ICE COLLISION FORCES Claude Daley1  

E-Print Network [OSTI]

1 ENERGY BASED ICE COLLISION FORCES Claude Daley1 1 Memorial University of Newfoundland, St. John's, Newfoundland, Canada A1C 3X5 ABSTRACT Ice collision forces can be determined by energy considerations. A variety of interaction geometry cases are considered. The indentation energy functions for eight different

Daley, Claude

416

POLAR SEA-ICE CLASSIFICATION USING ENHANCED RESOLUTION NSCAT DATA  

E-Print Network [OSTI]

POLAR SEA-ICE CLASSIFICATION USING ENHANCED RESOLUTION NSCAT DATA Q. P. Remund and D. G. Long of the scatterometer image reconstruction with filter (SIRF) algorithm. SIRF produces images of A and B where A is U is shown to have high correlation with the NSIDC SSM/I derived multiyear ice maps. INTRODUCTION Polar sea

Long, David G.

417

Ultrafast photochemistry of methyl hydroperoxide on ice particles  

E-Print Network [OSTI]

Ultrafast photochemistry of methyl hydroperoxide on ice particles M. A. Kambouresa , S. AOOH, on water clusters produces a surprisingly wide range of products on a subpicosecond time scale | photodissociation Photoinduced processes at surfaces of water or ice are of interest in atmospheric chemistry

Nizkorodov, Sergey

418

POLLEN DISPERSAL AND DEPOSITION ON THE QUELCCAYA ICE CAp, PERU  

E-Print Network [OSTI]

POLLEN DISPERSAL AND DEPOSITION ON THE QUELCCAYA ICE CAp, PERU Carl A. Reese and Kam-biu Liu: The relatively young science of tropical ice-core palynology has proven effective in the study of paleoenvironments by its ability to produce long-term and high- resolution paleoclimatic data. However, no studies

Liu, Kam-biu

419

Effectsof ice-crystal structure on halo formation: cirrus cloud  

E-Print Network [OSTI]

Effectsof ice-crystal structure on halo formation: cirrus cloud experimental and ray campaign, four 220halo-producing cirrus clouds were studied jointly from a ground- based polarization lidar of the aircraft, which collecteda total of 84slides byimpaction, preserving the ice crystals for later microscopic

Takano, Yoshihide

420

Has the ice man arrived? Tact on the Internet  

E-Print Network [OSTI]

Has the ice man arrived? Tact on the Internet Jonathan Grudin, UC Irvine and Microsoft Research. Eugene O'Neill's play The Ice Man Cometh outlines a series of calamities that occur when his characters the graded corrections via e- mail. The students produced a counter- proposal: After grading an exercise

Hearst, Marti

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Sea Ice Enhancements to Polar WRF* Keith M. Hines1**  

E-Print Network [OSTI]

covering Europe and the Arctic Ocean demonstrate remote impacts of Arctic sea ice thickness on18 midSea Ice Enhancements to Polar WRF* Keith M. Hines1** , David H. Bromwich,1,2 , Lesheng Bai1 model (Polar WRF), a polar-optimized version of2 WRF, is developed by and available to the community

Howat, Ian M.

422

Optimization of Ice Thermal Storage Systems Design for HVAC Systems  

E-Print Network [OSTI]

Ice thermal storage is promising technology to reduce energy costs by shifting the cooling cost from on-peak to off-peak periods. The paper discusses the optimal design of ice thermal storage and its impact on energy consumption, demand, and total...

Nassif, N.; Hall, C.; Freelnad, D.

2013-01-01T23:59:59.000Z

423

Dynamical mechanism of antifreeze proteins to prevent ice growth  

E-Print Network [OSTI]

The fascinating ability of algae, insects and fishes to survive at temperatures below normal freezing is realized by antifreeze proteins (AFPs). These are surface-active molecules and interact with the diffusive water/ice interface thus preventing complete solidification. We propose a new dynamical mechanism on how these proteins inhibit the freezing of water. We apply a Ginzburg-Landau type approach to describe the phase separation in the two-component system (ice, AFP). The free energy density involves two fields: one for the ice phase with a low AFP concentration, and one for liquid water with a high AFP concentration. The time evolution of the ice reveals microstructures resulting from phase separation in the presence of AFPs. We observed a faster clustering of pre-ice structure connected to a locking of grain size by the action of AFP, which is an essentially dynamical process. The adsorption of additional water molecules is inhibited and the further growth of ice grains stopped. The interfacial energy between ice and water is lowered allowing the AFPs to form smaller critical ice nuclei. Similar to a hysteresis in magnetic materials we observe a thermodynamic hysteresis leading to a nonlinear density dependence of the freezing point depression in agreement with the experiments.

B. Kutschan; K. Morawetz; S. Thoms

2014-06-19T23:59:59.000Z

424

IceCube Collaboration Contributions to ARENA 2008  

E-Print Network [OSTI]

Contributions of the IceCube Collaboration to the 3rd International Workshop on Acoustic and Radio EeV Neutrino detection Activities (ARENA 2008). The conference was held at Roma University "Sapienza," June 25-27, 2008, in Rome, Italy. This is an html index of the IceCube Collaboration contributions, with clickable links to the individual papers.

IceCube Collaboration

2008-11-15T23:59:59.000Z

425

E-Print Network 3.0 - automatic image processing Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

images are added... by the image retrieval systems. We designed an automatic experimental process to test our proposed strategy... Semi-Automatic ... Source: Dumais, Susan -...

426

E-Print Network 3.0 - automatic spatially-adaptive balancing...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

balancing Page: << < 1 2 3 4 5 > >> 1 Automatic Spatially-Adaptive Balancing of Energy Terms for Image Segmentation Summary: Automatic Spatially-Adaptive Balancing of Energy Terms...

427

E-Print Network 3.0 - automatic identification system Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Automatic2 Fingerprint Identification System (AFIS) in the 1960s. The use... -Finger Penetration Rate and ROC Variability for Automatic Fingerprint Identification Systems", in...

428

E-Print Network 3.0 - automatic audio-conference service Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

51 A Design of Web Service for Digital Photogrammetry Workstation using Service Oriented Architecture Summary: . Either an automatic way or semi-automatic ways, the semantics...

429

E-Print Network 3.0 - automatic survey meter Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

management services such as fine grained pricing schemes, automatic meter reading, demand response... to demand measurement and billing. Meters supporting automatic meter reading...

430

E-Print Network 3.0 - automatic landing control Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Chaumette and Jean-Michel Pflimlin Summary: . Subrahmanyam, "H infinity Design of FA-18A Automatic Carrier Landing System," Journal of Guidance, Control... for Automatic...

431

E-Print Network 3.0 - automatic test equipment Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Powered by Explorit Topic List Advanced Search Sample search results for: automatic test equipment Page: << < 1 2 3 4 5 > >> 1 Examination of Automatic Weighing Systems (AWS)...

432

E-Print Network 3.0 - automatic positioning system Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

have been carried... is initially positioned by computing a minimal path that follows image information between two automatically... Automatic Inferior Vena Cava Segmentation...

433

E-Print Network 3.0 - automatic meter reading Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

fine grained pricing schemes, automatic meter reading, demand response... to demand measurement and billing. Meters supporting automatic meter reading (AMR) can report demand......

434

Fact #850: December 8, 2014 Automatic Transmissions have closed the Fuel Economy Gap with Manual Transmissions  

Broader source: Energy.gov [DOE]

Historically, manual transmissions have delivered better fuel economy than automatic transmissions. However, improvements in the efficiency of automatic transmissions have closed that gap in recent...

435

E-Print Network 3.0 - automatic exploitation system Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Switzerland Collection: Computer Technologies and Information Sciences 8 Automatic Patch-Based Exploit Generation is Possible: Techniques and Implications Summary: Automatic...

436

E-Print Network 3.0 - automatically discovering hidden Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for: automatically discovering hidden Page: << < 1 2 3 4 5 > >> 1 Siphoning Hidden-Web Data through Keyword-Based Interfaces Summary: automatically reconstruct a collection...

437

Fire in the Ice, Spring 2005  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Marine Multi-Component Marine Multi-Component Seismology ............................ 1 Discovery of Possible Gas Hydrate Features ................... 5 Monitoring Station Update ..... 8 Announcements .................. 10 * Research Cruise Completed * Advisory Committee Meeting * Hot Ice Project Reports * Norway ICGH Meeting * Simulator Publicly Released * TOUGH-Fx/HYDRATE V 2.4 * AAPG Committee to Meet Spotlight on Research ........ 12 Scott Dallimore CONTACT POINT Ray Boswell National Energy Technology Laboratory (304) 285-4541 (304) 285-4216 fax Ray.Boswell@netl.doe.gov The Fire in the Ice Newsletter is also available online at our website www.netl.doe.gov/scngo/ NaturalGas/hydrates/index.html T H E N A T I O N A L E N E R G Y T E C H N O L O G Y L A B O R A T O R Y M E T H A N E H Y D R A T E N E W S L E T T E R Vol. 5, Iss. 2 ○ ○ ○ ○ ○

438

Magnetic charge crystals imaged in artificial spin ice  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Magnetic charge crystals imaged in artificial spin ice Magnetic charge crystals imaged in artificial spin ice Magnetic charge crystals imaged in artificial spin ice Potential data storage and computational advances could follow August 27, 2013 Potential data storage and computational advances could follow A 3-D depiction of the honeycomb artificial spin ice topography after the annealing and cooling protocols. The light and dark colors represent the north and south magnetic poles of the islands. Image by Ian Gilbert, U. of I. Department of Physics and Frederick Seitz Materials Research Laboratory Contact Nancy Ambrosiano Communications Office (505) 667-0471 Email Siv Schwink U. Illinois (217) 300-2201 Email "The emergence of magnetic monopoles in spin ice systems is a particular case of what physicists call fractionalization, or deconfinement of

439

Ground-State Structures of Ice at High-Pressures  

E-Print Network [OSTI]

\\textit{Ab initio} random structure searching based on density functional theory is used to determine the ground-state structures of ice at high pressures. Including estimates of lattice zero-point energies, ice is found to adopt three novel crystal phases. The underlying sub-lattice of O atoms remains similar among them, and the transitions can be characterized by reorganizations of the hydrogen bonds. The symmetric hydrogen bonds of ice X and $Pbcm$ are initially lost as ice transforms to structures with symmetries $Pmc2_1$ (800 - 950 GPa) and $P2_1$ (1.17 TPa), but they are eventually regained at 5.62 TPa in a layered structure $C2/m$. The $P2_1 \\rightarrow C2/m$ transformation also marks the insulator-to-metal transition in ice, which occurs at a significantly higher pressure than recently predicted.

McMahon, Jeffrey M

2011-01-01T23:59:59.000Z

440

VERIFICATION OF THE DEFENSE WASTE PROCESSING FACILITY'S (DWPF) PROCESS DIGESTION METHOD FOR THE SLUDGE BATCH 7A QUALIFICATION SAMPLE  

SciTech Connect (OSTI)

For each sludge batch that is processed in the Defense Waste Processing Facility (DWPF), the Savannah River National Laboratory (SRNL) performs confirmation of the applicability of the digestion method to be used by the DWPF lab for elemental analysis of Sludge Receipt and Adjustment Tank (SRAT) receipt samples and SRAT product process control samples. DWPF SRAT samples are typically dissolved using a room temperature HF-HNO{sub 3} acid dissolution (i.e., DWPF Cold Chem Method, see DWPF Procedure SW4-15.201) and then analyzed by inductively coupled plasma - atomic emission spectroscopy (ICP-AES). This report contains the results and comparison of data generated from performing the Aqua Regia (AR), Sodium peroxide/Hydroxide Fusion (PF) and DWPF Cold Chem (CC) method digestions of Sludge Batch 7a (SB7a) SRAT Receipt and SB7a SRAT Product samples. The SB7a SRAT Receipt and SB7a SRAT Product samples were prepared in the SRNL Shielded Cells, and the SRAT Receipt material is representative of the sludge that constituates the SB7a Batch or qualification composition. This is the sludge in Tank 51 that is to be transferred into Tank 40, which will contain the heel of Sludge Batch 6 (SB6), to form the Sb7a Blend composition.

Click, D.; Edwards, T.; Jones, M.; Wiedenman, B.

2011-03-14T23:59:59.000Z

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Tag-based Web Photo Retrieval Improved by Batch Mode Re-Tagging Lin Chen Dong Xu Ivor W. Tsang  

E-Print Network [OSTI]

Tag-based Web Photo Retrieval Improved by Batch Mode Re-Tagging Lin Chen Dong Xu Ivor W. Tsang Web photos in social media sharing websites such as Flickr are generally accompanied by rich but noisy textual descriptions (tags, captions, categories, etc.). In this pa- per, we proposed a tag-based photo

Tsang Wai Hung "Ivor"

442

Query PreExecution and Batching in Paradise: ATwoPronged Approach to the Efficient Processing of  

E-Print Network [OSTI]

of Queries on Tape­Resident Raster Images 1 JieBing Yu David J. DeWitt Department of Computer Sciences­ structured organization for tape volumes. Second, the Paradise query processing engine was modified to in tape scheduling, and query batching. A per­ formance evaluation on a working prototype demon­ strates

Liblit, Ben

443

SJSU Information Support Services Run Batch Contracts for Temporary Faculty info-support@sjsu.edu, 408-924-1530 Page 1  

E-Print Network [OSTI]

page displays. 5. Term: Use the lookup button to search the appropriate term. 6. Due Date: (optional data that exists in the system for the temporary faculty will appear on the Contract Appointment letter/Terms. 2. Click Batch Contracts for T. Faculty. The Batch Process for TF Contract search page displays. 3

Su, Xiao

444

Pipeline and Batch Sharing in Grid Workloads Douglas Thain, John Bent, Andrea C. Arpaci-Dusseau, Remzi H. Arpaci-Dusseau, and Miron Livny  

E-Print Network [OSTI]

Pipeline and Batch Sharing in Grid Workloads Douglas Thain, John Bent, Andrea C. Arpaci Abstract We present a study of six batch-pipelined scientific workloads that are candidates for execution characterizes workloads composed of pipelines of sequential processes that use file storage for communication

Wisconsin at Madison, University of

445

Batch and Flow Synthesis of 5-Hydroxymethylfurfural (HMF) from Fructose as a Bioplatform Intermediate: An Experiment for the Organic or Analytical Laboratory  

Science Journals Connector (OSTI)

Batch and Flow Synthesis of 5-Hydroxymethylfurfural (HMF) from Fructose as a Bioplatform Intermediate: An Experiment for the Organic or Analytical Laboratory ... In this laboratory experiment students synthesize 5-hydroxymethylfurfural (HMF) by dehydration of fructose in either batch or flow chemistry conditions. ...

Svilen P. Simeonov; Carlos A. M. Afonso

2013-09-25T23:59:59.000Z

446

Ice in Clouds ExperimentLayer Clouds. Part I: Ice Growth Rates Derived from Lenticular Wave Cloud Penetrations  

Science Journals Connector (OSTI)

Lenticular wave clouds are used as a natural laboratory to estimate the linear and mass growth rates of ice particles at temperatures from ?20 to ?32C and to characterize the apparent rate of ice nucleation at water saturation at a nearly ...

Andrew J. Heymsfield; Paul R. Field; Matt Bailey; Dave Rogers; Jeffrey Stith; Cynthia Twohy; Zhien Wang; Samuel Haimov

2011-11-01T23:59:59.000Z

447

Estimating the Sea Ice Compressive Strength from Satellite-Derived Sea Ice Drift and NCEP Reanalysis Data  

Science Journals Connector (OSTI)

Satellite-derived sea ice drift maps and sea level pressure from reanalysis data are used to infer upper and lower bounds on the large-scale compressive strength of Arctic sea ice. To this end, the two datasets are searched for special situations ...

L-B. Tremblay; M. Hakakian

2006-11-01T23:59:59.000Z

448

Breaking the ice: de-icing power transmission lines with high-frequency, high-voltage excitation  

E-Print Network [OSTI]

Breaking the ice: de-icing power transmission lines with high-frequency, high-voltage excitation of this work in other works must be obtained from the IEEE. #12;CING OF POWER TRANSMISSION lines during winter that applies 33-kV, 100-kHz power. TheoverallsystemisillustratedinFigure1.Itcouldbede- ployed in two different

449

DETERMINATION OF REPORTABLE RADIONUCLIDES FOR DWPF SLUDGE BATCH 4 MACROBATCH 5  

SciTech Connect (OSTI)

The Waste Acceptance Product Specifications (WAPS)1 1.2 require that 'The Producer shall report the inventory of radionuclides (in Curies) that have half-lives longer than 10 years and that are, or will be, present in concentrations greater than 0.05 percent of the total inventory for each waste type indexed to the years 2015 and 3115'. As part of the strategy to meet WAPS 1.2, the Defense Waste Processing Facility (DWPF) will report for each waste type, all radionuclides (with half-lives greater than 10 years) that have concentrations greater than 0.01 percent of the total inventory from time of production through the 1100 year period from 2015 through 3115. The initial listing of radionuclides to be included is based on the design-basis glass as identified in the Waste Form Compliance Plan (WCP)2 and Waste Form Qualification Report (WQR)3. However, it is required that this list be expanded if other radionuclides with half-lives greater than 10 years are identified that may meet the greater than 0.01% criterion for Curie content. Specification 1.6 of the WAPS, International Atomic Energy Agency (IAEA) Safeguards Reporting for High Level Waste (HLW), requires that the ratio by weights of the following uranium and plutonium isotopes be reported: U-233, U-234, U-235, U-236, U-238, Pu-238, Pu-239, Pu-240, Pu-241, and Pu-242. Therefore, the complete set of reportable radionuclides must also include this set of U and Pu isotopes. The DWPF is receiving radioactive sludge slurry from HLW Tank 40. The radioactive sludge slurry in Tank 40 is a blend of the previous contents of Tank 40 (Sludge Batch 3) and the sludge that was transferred to Tank 40 from Tank 51. The blend of sludge from Tank 51 and Tank 40 defines Sludge Batch 4 (also referred to as Macrobatch 5 (MB5)). This report develops the list of reportable radionuclides and associated activities and determines the radionuclide activities as a function of time. The DWPF will use this list and the activities as one of the inputs for the development of the Production Records that relate to the radionuclide inventory. This work was initiated through Task Technical Request HLW/DWPF/TTR-2005-0034; Rev. 0 entitled Sludge Batch 4 SRNL Shielded Cells Testing4. Specifically, this report details results from performing, in part, Subtask 3 of the TTR and, in part, meets Deliverable 7 of the TTR. The work was performed following the Technical Task and Quality Assurance Plan (TTQAP), WSRC-RP-2006-00310, Rev. 15 and Analytical Study Plan (ASP), WSRC-RP-2006-00458, Rev. 16. In order to determine the reportable radionuclides for Sludge Batch 4 (SB4) (Macro Batch 5 (MB5)), a list of radioisotopes that may meet the criteria as specified by the Department of Energy's (DOE) WAPS was developed. All radioactive U-235 fission products and all radioactive activation products that could be in the SRS HLW were considered. In addition, all U and Pu isotopes identified in WAPS 1.6 were included in the list. This list was then evaluated and some isotopes excluded from the projection calculations. Based on measurements and analytical detection limits, twenty-nine radionuclides have been identified as reportable for DWPF SB4 (MB5) as specified by WAPS 1.2. The 29 reportable nuclides are: Ni-59; Ni-63; Se-79; Sr-90; Zr-93; Nb-93m; Tc-99; Sn-126; Cs-137; Sm-151; U-233; U-234; Np-237; U-238; Pu-238; Pu-239; Pu-240; Am-241; Pu-241; Pu-242; Am-242m; Am-243; Cm-244; Cm-245; Cm-246; Cm-247; Bk-247; Cm-248; and Cf-251. The WCP and WQR require that all of radionuclides present in the Design Basis glass be considered as the initial set of reportable radionuclides. For SB4 (MB5), all of the radionuclides in the Design Basis glass are reportable except for three radionuclides: Pd-107, Cs-135, and Th-230. At no time through the calendar year 3115 did any of these three radionuclides contribute to more than 0.01% of the radioactivity on a Curie basis. Two additional uranium isotopes (U-235 and -236) must be added to the list of reportable radionuclides in order to meet WAPS 1.6. All of the Pu isotopes and other U isoto

Bannochie, C; Ned Bibler, N; David Diprete, D

2008-05-30T23:59:59.000Z

450

THE SLUDGE BATCH 7A GLASS VARIABILITY STUDY WITH FRIT 418 AND FRIT 702  

SciTech Connect (OSTI)

The Defense Waste Processing Facility (DWPF) is preparing to initiate processing of Sludge Batch 7a (SB7a) in May 2011. To support qualification of SB7a, the Savannah River National Laboratory (SRNL) was requested to execute a variability study (VS) to assess the applicability of the current Product Composition Control System (PCCS) durability models for the Frit 418-SB7a compositional region of interest. The objective of this study was to demonstrate applicability of the current durability models to the SB7a compositional region of interest and acceptability of the SB7a glasses with respect to the Environmental Assessment (EA) glass in terms of durability as defined by the Product Consistency Test (PCT). To support programmatic objectives, twenty-eight SB7a glasses were selected based on the nominal sludge projections used to support the frit recommendation. Twenty-three of the SB7a VS glasses were based on the use of Frit 418, while 5 glasses were based on the use of Frit 702. Frit 702 was also identified as a viable candidate for SB7a, especially if SO{sub 4} concentrations are found to be higher than anticipated. Frit 702 has shown a higher SO{sub 4} retention capability as compared to Frit 418. With respect to acceptability, the PCT results of the SB7a-VS glasses are acceptable relative to the EA glass regardless of thermal history (quenched or canister centerline cooled) or compositional view (target or measured). More specifically, all of the SB7a glasses have normalized boron release values (NL [B]) less than 0.9 g/L as compared to the benchmark NL [B] value for EA of 16.695 g/L. With respect to the applicability of the current durability models to the SB7a VS compositional region of interest, all of the study glasses (based on target compositions) lie within the 95% confidence intervals of the model predictions. When model applicability is based on the measured compositions, all of the SB7a VS glasses are predictable with the exception of SB7aVS-02 and SB7aVS-06. Although the NL [B] values of these two glasses range from 0.66 to 0.73 g/L (considered very acceptable), the PCT responses are not considered predictable by the current durability models. The current durability models are conservative for these glasses since they are more durable than predicted by the models. These two glasses are extreme vertices (EV) based compositions coupled with Frit 418 at 36% WL and target the maximum Na{sub 2}O content (15.01 wt% Na{sub 2}O) of the SB7a VS glasses. Higher alkali glasses for which the model overpredicts the PCT response have been observed previously in the Sludge Batch 3 (SB3) Phase 1 VS and the Sludge Batch 6 (SB6) VS.

Peeler, D.; Edwards, T.

2011-03-24T23:59:59.000Z

451

IceCube: An Instrument for Neutrino Astronomy  

E-Print Network [OSTI]

Neutrino astronomy beyond the Sun was first imagined in the late 1950s; by the 1970s, it was realized that kilometer-scale neutrino detectors were required. The first such instrument, IceCube, is near completion and taking data. The IceCube project transforms a cubic kilometer of deep and ultra-transparent Antarctic ice into a particle detector. A total of 5,160 optical sensors are embedded into a gigaton of Antarctic ice to detect the Cherenkov light emitted by secondary particles produced when neutrinos interact with nuclei in the ice. Each optical sensor is a complete data acquisition system, including a phototube, digitization electronics, control and trigger systems and LEDs for calibration. The light patterns reveal the type (flavor) of neutrino interaction and the energy and direction of the neutrino, making neutrino astronomy possible. The scientific missions of IceCube include such varied tasks as the search for sources of cosmic rays, the observation of Galactic supernova explosions, the search for dark matter, and the study of the neutrinos themselves. These reach energies well beyond those produced with accelerator beams. The outline of this review is as follows: Neutrino Astronomy and Kilometer-Scale Detectors. High-Energy Neutrino Telescopes: Methodologies of Neutrino Detection. IceCube Hardware. High-Energy Neutrino Telescopes: Beyond Astronomy. Future Projects

Francis Halzen; Spencer R. Klein

2010-07-07T23:59:59.000Z

452

CERN automatic audio-conference service  

Science Journals Connector (OSTI)

Scientists from all over the world need to collaborate with CERN on a daily basis. They must be able to communicate effectively on their joint projects at any time; as a result telephone conferences have become indispensable and widely used. Managed by 6 operators, CERN already has more than 20000 hours and 5700 audio-conferences per year. However, the traditional telephone based audio-conference system needed to be modernized in three ways. Firstly, to provide the participants with more autonomy in the organization of their conferences; secondly, to eliminate the constraints of manual intervention by operators; and thirdly, to integrate the audio-conferences into a collaborative working framework. The large number, and hence cost, of the conferences prohibited externalization and so the CERN telecommunications team drew up a specification to implement a new system. It was decided to use a new commercial collaborative audio-conference solution based on the SIP protocol. The system was tested as the first European pilot and several improvements (such as billing, security, redundancy...) were implemented based on CERN's recommendations. The new automatic conference system has been operational since the second half of 2006. It is very popular for the users and has doubled the number of conferences in the past two years.

Rodrigo Sierra Moral

2010-01-01T23:59:59.000Z

453

PRELIMINARY FRIT DEVELOPMENT AND MELT RATE TESTING FOR SLUDGE BATCH 6 (SB6)  

SciTech Connect (OSTI)

The Liquid Waste Organization (LWO) provided the Savannah River National Laboratory (SRNL) with a Sludge Batch 6 (SB6) composition projection in March 2009. Based on this projection, frit development efforts were undertaken to gain insight into compositional effects on the predicted and measured properties of the glass waste form and to gain insight into frit components that may lead to improved melt rate for SB6-like compositions. A series of Sludge Batch 6 (SB6) based glasses was selected, fabricated and characterized in this study to better understand the ability of frit compositions to accommodate uncertainty in the projected SB6 composition. Acceptable glasses (compositions where the Product Composition Control System (PCCS) Measurement Acceptability Region (MAR) predicted acceptable properties, good chemical durability was measured, and no detrimental nepheline crystallization was observed) can be made using Frit 418 with SB6 over a range of Na{sub 2}O and Al{sub 2}O{sub 3} concentrations. However, the ability to accommodate variation in the sludge composition limits the ability to utilize alternative frits for potential improvements in melt rate. Frit 535, which may offer improvements in melt rate due to its increased B2O3 concentration, produced acceptable glasses with the baseline SB6 composition at waste loadings of 34 and 42%. However, the PCCS MAR results showed that it is not as robust as Frit 418 in accommodating variation in the sludge composition. Preliminary melt rate testing was completed in the Melt Rate Furnace (MRF) with four candidate frits for SB6. These four frits were selected to evaluate the impacts of B{sub 2}O{sub 3} and Na{sub 2}O concentrations in the frit relative to those of Frit 418, although they are not necessarily candidates for SB6 vitrification. Higher concentrations of B{sub 2}O{sub 3} in the frit relative to that of Frit 418 appeared to improve melt rate. However, when a higher concentration of B{sub 2}O{sub 3} was coupled with a lower concentration of Na{sub 2}O relative to Frit 418, melt rate did not appear to improve. It is expected that a SB6 composition projection with less uncertainty will be received during analysis of the Tank 51 E-1 sample, which will be pulled after the completion of aluminum dissolution in August 2009. At that time, additional frit development work will be performed to seek improved melt rates while maintaining viable projected operating windows. This later work will ultimately lead to a frit recommendation for SB6.

Fox, K.; Miller, D.; Edwards, T.

2009-07-21T23:59:59.000Z

454

Fire in the Ice, Summer 2004  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

R R Vol. 4, Iss. 3 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ CONTENTS Gulf of Mexico Remote Observatory Update ............... 1 Hydrate Decomposition Studies at USGS .................... 5 NETL's HP View Cell Operational .......................... 10 Announcements .................. 13 * AAPG Hedberg Conference * JIP Drilling Delayed * TOUGH-Fx/HYDRATE v1.0 * Advisory Committee Meeting * Anaximander project Spotlight on Research ........ 16 Dr. Keith Kvenvolden CONTACT POINT Ray Boswell National Energy Technology Laboratory (304) 285-4541 (304) 285-4469 fax Ray.Boswell@netl.doe.gov The Fire in the Ice Newsletter is

455

Fire in the Ice, Fall 2004  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 4 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ CONTENTS AAPG Hedberg Research Conference ............................ 1 Oak Ridge Facilities .............. 4 Relic Gas Hydrates of Northwestern Siberia ............. 8 Announcements .................. 11 * JIP Tests in the Gulf of Mexico * Planning Workshop Slated for Early Next Year Spotlight on Research ........ 12 Ingo Pecher CONTACT POINT Ray Boswell National Energy Technology Laboratory (304) 285-4541 (304) 285-4216 fax Ray.Boswell@netl.doe.gov The Fire in the Ice Newsletter is also available online at our website (http://www.netl.doe.gov/ scngo/Natural%20Gas/hydrates/)

456

Metastable hydronium ions in UV-irradiated ice  

SciTech Connect (OSTI)

We show that the irradiation of UV light (10-11 eV) onto an ice film produces metastable hydronium (H{sub 3}O{sup +}) ions in the ice at low temperatures (53-140 K). Evidence of the presence of metastable hydronium ions was obtained by experiments involving adsorption of methylamine onto UV-irradiated ice films and hydrogen-deuterium (H/D) isotopic exchange reaction. The methylamine adsorption experiments showed that photogenerated H{sub 3}O{sup +} species transferred a proton to the methylamine arriving at the ice surface, thus producing the methyl ammonium ion, which was detected by low energy sputtering method. The H{sub 3}O{sup +} species induced the H/D exchange of water, which was monitored through the detection of water isotopomers on the surface by using the Cs{sup +} reactive ion scattering method. Thermal and temporal stabilities of H{sub 3}O{sup +} and its proton migration activity were examined. The lifetime of the hydronium ions in the amorphized ice was greater than 1 h at {approx}53 K and decreased to {approx}5 min at 140 K. Interestingly, a small portion of hydronium ions survived for an extraordinarily long time in the ice, even at 140 K. The average migration distance of protons released from H{sub 3}O{sup +} in the ice was estimated to be about two water molecules at {approx}54 K and about six molecules at 100 K. These results indicate that UV-generated hydronium ions can be efficiently stabilized in low-temperature ice. Such metastable hydronium ions may play a significant role in the acid-base chemistry of ice particles in interstellar clouds.

Moon, Eui-Seong; Kang, Heon [Department of Chemistry, Seoul National University, 1 Gwanak-ro, Seoul 151-747 (Korea, Republic of)

2012-11-28T23:59:59.000Z

457

Annual measurement of sea-ice thickness using an upward-looking sonar  

Science Journals Connector (OSTI)

... and the forms the ice takes are of great importance to operators in polar conditions. Offshore ...

Rick Hudson

1990-03-08T23:59:59.000Z

458

1 Microscopic and environmental controls on the spacing and thickness of segregated 2 ice lenses  

E-Print Network [OSTI]

water, and ice conspire with the prevailing environmental conditions 52 to produce macroscopic ice by Henry (2000). The first comprehensive and tractable model 57 for ice lens growth was produced by O1 Microscopic and environmental controls on the spacing and thickness of segregated 2 ice lenses 3

Rempel, Alan W.

459

Polar Sea Ice Mapping Using SeaWinds Data Hyrum S. Anderson and David G. Long  

E-Print Network [OSTI]

of Bayes detection to produce sea ice extent maps. Statistical models for sea ice and ocean are represented information is incorpo- rated through the loss terms associated with Bayes risk. Sea ice extent maps producedPolar Sea Ice Mapping Using SeaWinds Data Hyrum S. Anderson and David G. Long Brigham Young

Long, David G.

460

Transoceanic infragravity waves impacting Antarctic ice shelves Peter D. Bromirski,1  

E-Print Network [OSTI]

that IG- wave forcing may produce ice-shelf fractures that enable abrupt disintegration of ice shelvesTransoceanic infragravity waves impacting Antarctic ice shelves Peter D. Bromirski,1 Olga V-forced shoreward propagating swell. Seismic observations on the Ross Ice Shelf show that free IG waves generated

Boyce, C. Kevin

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Development, sensitivity analysis, and uncertainty quantification of high-fidelity arctic sea ice models.  

SciTech Connect (OSTI)

Arctic sea ice is an important component of the global climate system and due to feedback effects the Arctic ice cover is changing rapidly. Predictive mathematical models are of paramount importance for accurate estimates of the future ice trajectory. However, the sea ice components of Global Climate Models (GCMs) vary significantly in their prediction of the future state of Arctic sea ice and have generally underestimated the rate of decline in minimum sea ice extent seen over the past thirty years. One of the contributing factors to this variability is the sensitivity of the sea ice to model physical parameters. A new sea ice model that has the potential to improve sea ice predictions incorporates an anisotropic elastic-decohesive rheology and dynamics solved using the material-point method (MPM), which combines Lagrangian particles for advection with a background grid for gradient computations. We evaluate the variability of the Los Alamos National Laboratory CICE code and the MPM sea ice code for a single year simulation of the Arctic basin using consistent ocean and atmospheric forcing. Sensitivities of ice volume, ice area, ice extent, root mean square (RMS) ice speed, central Arctic ice thickness, and central Arctic ice speed with respect to ten different dynamic and thermodynamic parameters are evaluated both individually and in combination using the Design Analysis Kit for Optimization and Terascale Applications (DAKOTA). We find similar responses for the two codes and some interesting seasonal variability in the strength of the parameters on the solution.

Peterson, Kara J.; Bochev, Pavel Blagoveston; Paskaleva, Biliana S.

2010-09-01T23:59:59.000Z

462

Development of the Great Lakes Ice-circulation Model (GLIM): Application to Lake Erie in 20032004  

E-Print Network [OSTI]

due to strong cooling and wind mixing. Prediction of the lake's ice extent (i.e., ice coverDevelopment of the Great Lakes Ice-circulation Model (GLIM): Application to Lake Erie in 2003: Received 4 May 2009 Accepted 30 November 2009 Communicated by Dr. Ram Yerubandi Index words: Coupled Ice

463

Arctic sea ice declined rapidly to unprec-edented low extents in the summer of 2007,  

E-Print Network [OSTI]

cooling, ice extent remains far below normal. Understanding Sea Ice Loss Key factors behind this recordArctic sea ice declined rapidly to unprec- edented low extents in the summer of 2007, raising concern that the Arctic may be on the verge of a fundamental transition toward a seasonal ice cover

Clements, Craig

464

Seasonal variation of upwelling in the Alaskan Beaufort Sea: Impact of sea ice cover  

E-Print Network [OSTI]

that lateral ocean heat flux from the shelf to the basin melts a substantial amount of ice in the marginal iceSeasonal variation of upwelling in the Alaskan Beaufort Sea: Impact of sea ice cover Lena M to characterize differences in upwelling near the shelf break in the Alaskan Beaufort Sea due to varying sea ice

Pickart, Robert S.

465

ARKTOS: An Intelligent System for SAR Sea Ice Image Classification Leen-Kiat Soh1  

E-Print Network [OSTI]

in meteorology and in global climate studies. For example, the thickness of sea ice influences the heat fluxARKTOS: An Intelligent System for SAR Sea Ice Image Classification Leen-Kiat Soh1 , Costas sea ice image analysis named ARKTOS (Advanced Reasoning using Knowledge for Typing Of Sea ice). ARKTOS

Kansas, University of

466

Seasonal variation of upwelling in the Alaskan Beaufort Sea: Impact of sea ice cover  

E-Print Network [OSTI]

ocean heat flux42 from the shelf to the basin melts a substantial amount of ice in the marginal ice Seasonal variation of upwelling in the Alaskan Beaufort Sea: Impact of sea ice cover Lena M the shelfbreak in the Alaskan Beaufort Sea due to3 varying sea-ice conditions. The record is divided into three

Pickart, Robert S.

467

Modeling Coulombic failure of sea ice with leads Alexander V. Wilchinsky1  

E-Print Network [OSTI]

Modeling Coulombic failure of sea ice with leads Alexander V. Wilchinsky1 and Daniel L. Feltham1 ice failure under lowconfinement compression is modeled with a linear Coulombic criterion that can of anisotropy we consider a simplified anisotropic sea ice model where the sea ice thickness depends

Feltham, Daniel

468

Testing a Coupled Ice-Mixed-Layer Model Under Subarctic Conditions  

Science Journals Connector (OSTI)

A one-dimensional oceanic mixed-layer model has been coupled with a thermodynamic sea ice model in order to study the seasonal cycle of ice-ocean interaction in the subarctic ocean. The ice thickness is assumed constant and only variations of ice ...

Marie-Nolle Houssais

1988-02-01T23:59:59.000Z

469

The role of sea ice in the temperature-precipitation feedback of glacial cycles  

E-Print Network [OSTI]

precipitation over the ice sheets. The insulating effect of the sea ice on the hydrological cycle is foundThe role of sea ice in the temperature-precipitation feedback of glacial cycles Hezi Gildor · Yosef climate history can shed some light. Sea ice is a key player in the climate system and in the hydrological

Tziperman, Eli

470

The role of sea ice in the temperature-precipitation feedback of glacial cycles  

E-Print Network [OSTI]

to an increase in snow precipitation over the ice sheets. The insulating effect of the sea iceThe role of sea ice in the temperature-precipitation feedback of glacial cycles Hezi Gildor · Yosef unsatisfactory, yet upon which past climate history can shed some light. Sea ice is a key player in the climate

Tziperman, Eli

471

10.1098/rsta.2003.1244 Sea-ice switches and abrupt climate change  

E-Print Network [OSTI]

of sea-ice cover|through its strong cooling ice{albedo feedback, its insulating e®ect on local10.1098/rsta.2003.1244 Sea-ice switches and abrupt climate change By Hezi Gildor1 a n d Eli propose that past abrupt climate changes were probably a result of rapid and extensive variations in sea-ice

Tziperman, Eli

472

NAO influence on net sea ice production and exchanges in the Arctic region  

E-Print Network [OSTI]

insulation during the ice formation process. The North Atlantic Oscillation (NAO) related atmosphericNAO influence on net sea ice production and exchanges in the Arctic region Aixue Hu, Claes Rooth and Rainer Bleck February 18, 2003 Abstract The variability of the net sea ice production and the sea ice

Hu, Aixue

473

NAO influence on net sea ice production and exchanges in the Arctic region  

E-Print Network [OSTI]

suppresses the development of thermal insulation during the ice formation process. The North AtlanticNAO influence on net sea ice production and exchanges in the Arctic region Aixue Hu National Center of the net sea ice production and the sea ice exchanges between the Arctic and its adjacent seas are studied

Hu, Aixue

474

Ice-shelf collapse from subsurface warming as a trigger for Heinrich events  

E-Print Network [OSTI]

in Antarctica, the resulting ice-shelf loss and attendant HSIS acceleration would produce a Heinrich eventIce-shelf collapse from subsurface warming as a trigger for Heinrich events Shaun A. Marcotta,1-discharge events from the Hudson Strait Ice Stream (HSIS) of the Laurentide Ice Sheet, referred to as Heinrich

Schmittner, Andreas

475

Sediment Melt-Migration Dynamics in Perennial Antarctic Lake Ice Steven M. Jepsen*  

E-Print Network [OSTI]

melting through laboratory ice at 22 uC in simulated summer conditions, with warmer ice producing faster boundaries was pronounced in laboratory ice warmer than 21 uC. This mechanism produced a flux of 0.1 g m22 hrSediment Melt-Migration Dynamics in Perennial Antarctic Lake Ice Steven M. Jepsen* Edward E. Adams

Priscu, John C.

476

FESD Proposal, Type I VOICE: Volcano, Ocean, Ice, and Carbon Experiments  

E-Print Network [OSTI]

in continental ice volume and sea level produce changes in pressure and stress within the crust and mantleFESD Proposal, Type I VOICE: Volcano, Ocean, Ice, and Carbon Experiments Project Manager: Charles during Pleistocene ice ages. We posit that changes in sea level and ice volume drive changes in volcanism

Huybers, Peter

477

Seasonal predictions of ice extent in the Arctic Ocean R. W. Lindsay,1  

E-Print Network [OSTI]

Service and the U. S. National Ice Center) produces summer outlooks of ice conditions for specific regionsSeasonal predictions of ice extent in the Arctic Ocean R. W. Lindsay,1 J. Zhang,1 A. J. Schweiger,1 29 February 2008. [1] How well can the extent of arctic sea ice be predicted for lead periods of up

Zhang, Jinlun

478

Modeled methanesulfonic acid (MSA) deposition in Antarctica and its relationship to sea ice  

E-Print Network [OSTI]

been investigated with the goal of producing a proxy for sea ice cover in past climates [SaigneModeled methanesulfonic acid (MSA) deposition in Antarctica and its relationship to sea ice P. J] Methanesulfonic acid (MSA) has previously been measured in ice cores in Antarctica as a proxy for sea ice extent

Holmes, Christopher D.

479

Experimental Validation of a Computational Fluid Dynamics Model for IAQ applications in Ice Rink Arenas  

E-Print Network [OSTI]

1 Experimental Validation of a Computational Fluid Dynamics Model for IAQ applications in Ice Rink, USA, Fax: 617-432-4122, Abstract Many ice rink arenas have ice resurfacing equipment that uses fossil temperature distributions in ice rinks. The numerical results agree reasonably with the corresponding

Chen, Qingyan "Yan"

480

Gas ageice age differences and the chronology of the Vostok ice core, M. L. Bender,1  

E-Print Network [OSTI]

Gas age­ice age differences and the chronology of the Vostok ice core, 0­100 ka M. L. Bender,1 G. [1] Gas is trapped in polar ice at depths of $50­120 m and is therefore significantly younger than cores (Vostok, Dome Fuji, and Dome C). We recorrelate the gas records of Vostok and Greenland Ice Sheet

Chappellaz, Jérôme

Note: This page contains sample records for the topic "batch automatic ice" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Application of FLake for the prediction of ice thickness for inland waters in the Netherlands  

E-Print Network [OSTI]

Application of FLake for the prediction of ice thickness for inland waters in the Netherlands Cisco in the Netherlands. In cold spells numerous ditches, canals and lakes get frozen and many people go out for ice in the Netherlands. in ice thickness predictions. KNMI issues ice thickness predictions, based on a model of De Bruin

Stoffelen, Ad

482

Disable Automatic Login, Cyber Security, Information Technology Division,  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Disable Automatic Login Disable Automatic Login Automatic Login MUST be disabled... Follow the steps below to verify that auto login is disabled. Verify Security Settings Select Personal Section: Click Make sure the following required boxes are checked. - Require password to wake this computer from sleep or screen saver - Disable automatic login If so, close panel. If not, continue... Note: Mac users should have the panel locked at all times. Click the lock image to lock the panel if its open to prevent further changes. To unlock the above panel, click the lock image to bring up the login box. Insert your username & password, click . You should now be able to make changes to the panel.

483

Wien Automatic System Planning (WASP) Package | Open Energy Information  

Open Energy Info (EERE)

Wien Automatic System Planning (WASP) Package Wien Automatic System Planning (WASP) Package Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Wien Automatic System Planning (WASP) Package Agency/Company /Organization: International Atomic Energy Agency Sector: Energy Focus Area: Renewable Energy, Energy Efficiency Topics: Pathways analysis Resource Type: Software/modeling tools Website: www-pub.iaea.org/MTCD/publications/PDF/CMS-16.pdf Cost: Free References: WASP[1] "The WASP-IV code permits finding the optimal expansion plan for a power generating system over a period of up to thirty years, within constraints given by the planner." References ↑ "WASP" Retrieved from "http://en.openei.org/w/index.php?title=Wien_Automatic_System_Planning_(WASP)_Package&oldid=403685

484

Automatic Lighting Shutoff for Tenant Spaces - Code Notes | Building Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Automatic Lighting Shutoff for Tenant Spaces - Code Notes Automatic Lighting Shutoff for Tenant Spaces - Code Notes Automatic shutoff capability for all interior building lighting (with exceptions) is required by ASHRAE Standard 90.1-2007 (as well as previous versions back to 1999) and the 2009 International Energy Conservation Code (including versions back to 2003) for buildings over 5,000ft2. Publication Date: Thursday, March 10, 2011 cn_automatic_lighting_shutoff_for_tenant_spaces.pdf Document Details Document Number: PNNL-SA-66719 Prepared by: Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program Focus: Compliance Building Type: Commercial Code Referenced: ASHRAE Standard 90.1-2007 2009 IECC Document type: Code Notes Target Audience: Architect/Designer Builder Code Official

485

The Effects of Automatic Emotion Regulation on the Desirability Bias  

E-Print Network [OSTI]

by: Chair of Committee, Heather C. Lench Committee Members, Brandon J. Schmeichel Kelly L. Haws Head of Department, Ludy T. Benjamin May 2011 Major Subject: Psychology iii ABSTRACT The Effects of Automatic Emotion Regulation...

Bench, Shane William

2011-08-08T23:59:59.000Z

486

Automatic record extraction for the World Wide Web  

E-Print Network [OSTI]

As the amount of information on the World Wide Web grows, there is an increasing demand for software that can automatically process and extract information from web pages. Despite the fact that the underlying data on most ...

Shen, Yuan Kui

2006-01-01T23:59:59.000Z

487

Automatic calibration of modulated fractional-N frequency synthesizers  

E-Print Network [OSTI]

The focus of this research has been the development of a low power, radio frequency transmitter architecture. Specifically, a technique for in service automatic calibration of a modulated phase locked loop (PLL) frequency ...

McMahill, Dan

2001-01-01T23:59:59.000Z

488

Automatic fringe analysis with a computer image-processing system  

Science Journals Connector (OSTI)

The application of a general-purpose image-processing computer system to automatic fringe analysis is presented. Three areas of application have been examined where the use of a system...

Robinson, David W

1983-01-01T23:59:59.000Z

489

VEE-0043- In the Matter of Greenville Automatic Gas Company  

Broader source: Energy.gov [DOE]

On March 11, 1997, Greenville Automatic Gas Company (Greenville) filed an Application for Exception with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE). In its...

490

Automatic Tracking Solar Street Light Based on Microcontroller  

Science Journals Connector (OSTI)

This paper designed an automatic tracking solar lights based on microcontroller, mainly by the solar panels, solar auto-tracking controller, batteries, lights and other components. Through the solar sensor cir...

Liu Zhen Ya; Guan Chen Zhi; Yan-hu Jiang

2012-01-01T23:59:59.000Z

491

Automatic detection of thesaurus relations for information retrieval applications  

Science Journals Connector (OSTI)

Is it possible to discover semantic term relations useful for thesauri without any semantic information? Yes, it is. A recent approach for automatic thesaurus construction is based on explicit linguistic knowledg...

Gerda Ruge

1997-01-01T23:59:59.000Z

492

Automatic Construction of a Dynamic Thesaurus for Proper Names  

Science Journals Connector (OSTI)

Proper names outnumber all other word classes, but they are underrepresented in dictionaries and in electronic resources. We propose an automatic method of associating a stand-alone proper name repository with...

Roman Kurc; Maciej Piasecki; Stan Szpakowicz

2013-01-01T23:59:59.000Z

493

Unsupervised One-Class Learning for Automatic Outlier Removal  

Science Journals Connector (OSTI)

Outliers are pervasive in many computer vision and pattern recognition problems. Automatically eliminating outliers scattering among practical data collections becomes increasingly important, especially for Internet inspired vision applications. In this ... Keywords: One-Class Learning, Outlier Removal

Wei Liu, Gang Hua, John R. Smith

2014-06-01T23:59:59.000Z

494

Automatic Analysis of Plot for Story Rewriting Harry Halpin  

E-Print Network [OSTI]

Automatic Analysis of Plot for Story Rewriting Harry Halpin School of Informatics University of Informatics University of Edinburgh 2 Buccleuch Place Edinburgh, EH8 9LW Scotland, UK J.Moore@ed.ac.uk Judy

Moore, Johanna D.

495

Multi-level acoustic modeling for automatic speech recognition  

E-Print Network [OSTI]

Context-dependent acoustic modeling is commonly used in large-vocabulary Automatic Speech Recognition (ASR) systems as a way to model coarticulatory variations that occur during speech production. Typically, the local ...

Chang, Hung-An, Ph. D. Massachusetts Institute of Technology

2012-01-01T23:59:59.000Z

496

Testing a Procedure for Automatic Classification of Hydrometeor Types  

Science Journals Connector (OSTI)

Examples of automatic interpretation of polarimetric measurements made with an algorithm that classifies precipitation, from an Oklahoma squall line and a Florida airmass storm are presented. Developed in this paper are sensitivity tests of this ...

Dus?an S. Zrni?; Alexander Ryzhkov; Jerry Straka; Yidi Liu; J. Vivekanandan

2001-06-01T23:59:59.000Z

497

Automatic Error Finding in Access-Control Policies  

E-Print Network [OSTI]

Access-control policies are a key infrastructural technology for computer security. However, a significant problem is that system administrators need to be able to automatically verify whether their policies capture the ...

Jayaraman, Karthick

2010-05-05T23:59:59.000Z

498

Security Requirements for Classified Automatic Data Processing Systems  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish and describe the computer security program for classified automatic data processing (ADP) systems at the Department of Energy (DOE) Headquarters. This directive does not cancel another directive. Canceled by DOE N 251.9.

1985-07-10T23:59:59.000Z

499

Towards the automatic learning of idiomatic prepositional phrases  

Science Journals Connector (OSTI)

The objective of this work is to automatically determine, in an unsupervised manner, Spanish prepositional phrases of the type preposition nominal phrase preposition (P(NP(P) that behave in a sentence as a lexical unit and their semantic ...

Sofa N. Galicia-Haro; Alexander Gelbukh

2005-11-01T23:59:59.000Z

500

Jokestega: automatic joke generation-based steganography methodology  

Science Journals Connector (OSTI)

This paper presents a novel steganography methodology, namely Automatic Joke Generation Based Steganography Methodology Jokestega, that pursues textual jokes in order to hide messages. Basically, Jokestega methodology takes advantage of recent advances ...

Abdelrahman Desoky

2012-03-01T23:59:59.000Z