National Library of Energy BETA

Sample records for baseline instruments experiment

  1. New Physics Effects in Long Baseline Experiments

    E-Print Network [OSTI]

    Osamu Yasuda

    2007-10-13

    We discuss the implications of new physics, which modifies the matter effect in neutrino oscillations, to long baseline experiments, particularly the MINOS experiment. An analytic formula in the presence of such a new physics interaction is derived for $P(\

  2. Energy reconstruction in the Long-Baseline Neutrino Experiment

    E-Print Network [OSTI]

    Ulrich Mosel; Olga Lalakulich; Kai Gallmeister

    2014-04-24

    The Long-Baseline Neutrino Experiment aims at measuring fundamental physical parameters to high precision and exploring physics beyond the standard model. Nuclear targets introduce complications towards that aim. We investigate the uncertainties in the energy reconstruction, based on quasielastic scattering relations, due to nuclear effects. The reconstructed event distributions as a function of energy tend to be smeared out and shifted by several 100 MeV in their oscillatory structure if standard event selection is used. We show that a more restrictive experimental event selection offers the possibility to reach the accuracy needed for a determination of the mass ordering and the $CP$-violating phase. Quasielastic-based energy reconstruction could thus be a viable alternative to the calorimetric reconstruction also at higher energies.

  3. Accelerator-based Short-baseline Neutrino Oscillation Experiments

    E-Print Network [OSTI]

    Gollapinni, Sowjanya

    2015-01-01

    Over the last two decades, several experiments have reported anomalous results that could be hinting at the exciting possibility of sterile neutrino states in the $eV^{2}$ mass scale. Liquid Argon Time Projection Chambers (LArTPCs) are a particularly promising technology to explore this physics due to their fine-grained tracking and exceptional calorimetric capabilities. The MicroBooNE experiment, a 170 ton LArTPC scheduled to start taking data very soon with Fermilab's Booster Neutrino Beam (BNB), will combine LArTPC development with the main physics goal of understanding the low-energy electromagnetic anomaly seen by the MiniBooNE experiment. Looking towards the future, MicroBooNE will become a part of the \\textit{short-baseline neutrino} program which expands the physics capabilities of the BNB in many important ways by adding additional LArTPC detectors to search for light sterile neutrinos and bring a definitive resolution to the set of existing experimental anomalies. This paper will give an overview of...

  4. Scientific Opportunities with the Long-Baseline Neutrino Experiment

    SciTech Connect (OSTI)

    Adams, C.; et al.,

    2013-07-28

    In this document, we describe the wealth of science opportunities and capabilities of LBNE, the Long-Baseline Neutrino Experiment. LBNE has been developed to provide a unique and compelling program for the exploration of key questions at the forefront of particle physics. Chief among the discovery opportunities are observation of CP symmetry violation in neutrino mixing, resolution of the neutrino mass hierarchy, determination of maximal or near-maximal mixing in neutrinos, searches for nucleon decay signatures, and detailed studies of neutrino bursts from galactic supernovae. To fulfill these and other goals as a world-class facility, LBNE is conceived around four central components: (1) a new, intense wide-band neutrino source at Fermilab, (2) a fine-grained `near' neutrino detector just downstream of the source, (3) the Sanford Underground Research Facility (SURF) in Lead, South Dakota at an optimal distance (~1300 km) from the neutrino source, and (4) a massive liquid argon time-projection chamber (LArTPC) deployed there as a 'far' detector. The facilities envisioned are expected to enable many other science opportunities due to the high event rates and excellent detector resolution from beam neutrinos in the near detector and atmospheric neutrinos in the far detector. This is a mature, well developed, world class experiment whose relevance, importance, and probability of unearthing critical and exciting physics has increased with time.

  5. The Long Baseline Neutrino Experiment (LBNE) Water Cherenkov Detector (WCD) Conceptual Design Report (CDR)

    E-Print Network [OSTI]

    The LBNE Collaboration

    2012-04-10

    Conceptual Design Report developed for the Water Cherenkov Detector (WCD) option for the far detector of the Long Baseline Neutrino Experiment.

  6. THE FIRST VERY LONG BASELINE INTERFEROMETRIC SETI EXPERIMENT

    SciTech Connect (OSTI)

    Rampadarath, H.; Morgan, J. S.; Tingay, S. J.; Trott, C. M.

    2012-08-15

    The first Search for Extra-Terrestrial Intelligence (SETI) conducted with very long baseline interferometry (VLBI) is presented. By consideration of the basic principles of interferometry, we show that VLBI is efficient at discriminating between SETI signals and human generated radio frequency interference (RFI). The target for this study was the star Gliese 581, thought to have two planets within its habitable zone. On 2007 June 19, Gliese 581 was observed for 8 hr at 1230-1544 MHz with the Australian Long Baseline Array. The data set was searched for signals appearing on all interferometer baselines above five times the noise limit. A total of 222 potential SETI signals were detected and by using automated data analysis techniques were ruled out as originating from the Gliese 581 system. From our results we place an upper limit of 7 MW Hz{sup -1} on the power output of any isotropic emitter located in the Gliese 581 system within this frequency range. This study shows that VLBI is ideal for targeted SETI including follow-up observations. The techniques presented are equally applicable to next-generation interferometers, such as the long baselines of the Square Kilometre Array.

  7. THE Q/U IMAGING EXPERIMENT INSTRUMENT

    SciTech Connect (OSTI)

    Bischoff, C.; Brizius, A.; Buder, I.; Kusaka, A.; Smith, K. M.; Bogdan, M. [Kavli Institute for Cosmological Physics, Department of Physics, Enrico Fermi Institute, The University of Chicago, Chicago, IL 60637 (United States); Chinone, Y. [High Energy Accelerator Research Organization (KEK), 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Cleary, K.; Reeves, R. [Cahill Center for Astronomy and Astrophysics, California Institute of Technology, 1200 E. California Blvd M/C 249-17, Pasadena, CA 91125 (United States); Dumoulin, R. N.; Newburgh, L. B. [Department of Physics and Columbia Astrophysics Laboratory, Columbia University, New York, NY 10027 (United States); Monsalve, R.; Bustos, R. [Department of Physics, University of Miami, 1320 Campo Sano Drive, Coral Gables, FL 33146 (United States); Naess, S. K. [Institute of Theoretical Astrophysics, University of Oslo, P.O. Box 1029 Blindern, N-0315 Oslo (Norway); Nixon, G. [Joseph Henry Laboratories of Physics, Jadwin Hall, Princeton University, Princeton, NJ 08544 (United States); Vanderlinde, K. [Department of Physics, McGill University, 3600 Rue University, Montreal, Quebec H3A 2T8 (Canada); Wehus, I. K. [Department of Physics, University of Oslo, P.O. Box 1048 Blindern, N-0316 Oslo (Norway); Church, S. E. [Kavli Institute for Particle Astrophysics and Cosmology and Department of Physics, Stanford University, Varian Physics Building, 382 Via Pueblo Mall, Stanford, CA 94305 (United States); Davis, R.; Dickinson, C., E-mail: newburgh@princeton.edu [Jodrell Bank Centre for Astrophysics, Alan Turing Building, School of Physics and Astronomy, University of Manchester, Oxford Road, Manchester M13 9PL (United Kingdom); and others

    2013-05-01

    The Q/U Imaging ExperimenT (QUIET) is designed to measure polarization in the cosmic microwave background, targeting the imprint of inflationary gravitational waves at large angular scales({approx}1 Degree-Sign ). Between 2008 October and 2010 December, two independent receiver arrays were deployed sequentially on a 1.4 m side-fed Dragonian telescope. The polarimeters that form the focal planes use a compact design based on high electron mobility transistors (HEMTs) that provides simultaneous measurements of the Stokes parameters Q, U, and I in a single module. The 17-element Q-band polarimeter array, with a central frequency of 43.1 GHz, has the best sensitivity (69 {mu}Ks{sup 1/2}) and the lowest instrumental systematic errors ever achieved in this band, contributing to the tensor-to-scalar ratio at r < 0.1. The 84-element W-band polarimeter array has a sensitivity of 87 {mu}Ks{sup 1/2} at a central frequency of 94.5 GHz. It has the lowest systematic errors to date, contributing at r < 0.01. The two arrays together cover multipoles in the range l {approx} 25-975. These are the largest HEMT-based arrays deployed to date. This article describes the design, calibration, performance, and sources of systematic error of the instrument.

  8. The Science and Strategy for Phasing of the Long-Baseline Neutrino Experiment

    SciTech Connect (OSTI)

    Diwan, Milind V. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2012-05-22

    This note is about the principles behind a phased plan for realizing a Long-Baseline Neutrino Experiment(LBNE) in the U.S.. The most important issue that must be resolved is the direction of the first phase of the experiment. Based on both scientific and programmatic considerations, the U.S. should pursue the best option for accelerator neutrino physics, which is the longer baseline towards Homestake with an optimizedbroadband intense beam.

  9. SRNL RADIONUCLIDE FIELD LYSIMETER EXPERIMENT: BASELINE CONSTRUCTION AND IMPLEMENTATION

    SciTech Connect (OSTI)

    Roberts, K.; Kaplan, D.; Bagwell, L.; Powell, B.; Almond, P.; Emerson, H.; Hixon, A.; Jablonski, J.; Buchanan, C.; Waterhouse, T.

    2012-10-17

    The purpose of this document is to compile information regarding experimental design, facility design, construction, radionuclide source preparation, and path forward for the ten year Savannah River National Laboratory (SRNL) Radionuclide Field Lysimeter Experiment at the Savannah River Site (SRS). This is a collaborative effort by researchers at SRNL and Clemson University. The scientific objectives of this study are to: Study long-term radionuclide transport under conditions more representative of vadose zone conditions than laboratory experiments; Provide more realistic quantification of radionuclide transport and geochemistry in the vadose zone, providing better information pertinent to radioactive waste storage solutions than presently exists; Reduce uncertainty and improve justification for geochemical models such as those used in performance assessments and composite analyses.

  10. Super-NOnuA: A Long-baseline neutrino experiment with two off-axis detectors

    SciTech Connect (OSTI)

    Mena Requejo, Olga; /Fermilab; Palomares-Ruiz, Sergio; /Vanderbilt U.; Pascoli, Silvia; /CERN

    2005-04-01

    Establishing the neutrino mass hierarchy is one of the fundamental questions that will have to be addressed in the next future. Its determination could be obtained with long-baseline experiments but typically suffers from degeneracies with other neutrino parameters. We consider here the NOvA experiment configuration and propose to place a second off-axis detector, with a shorter baseline, such that, by exploiting matter effects, the type of neutrino mass hierarchy could be determined with only the neutrino run. We show that the determination of this parameter is free of degeneracies, provided the ratio L/E, where L the baseline and E is the neutrino energy, is the same for both detectors.

  11. Experimental Parameters for a Cerium 144 Based Intense Electron Antineutrino Generator Experiment at Very Short Baselines

    E-Print Network [OSTI]

    J. Gaffiot; T. Lasserre; G. Mention; M. Vivier; M. Cribier; M. Durero; V. Fischer; A. Letourneau; E. Dumonteil; I. S. Saldikov; G. V. Tikhomirov

    2015-02-09

    The standard three-neutrino oscillation paradigm, associated with small squared mass splittings $\\ll 0.1\\ \\mathrm{eV^2}$, has been successfully built up over the last 15 years using solar, atmospheric, long baseline accelerator and reactor neutrino experiments. However, this well-established picture might suffer from anomalous results reported at very short baselines in some of these experiments. If not experimental artifacts, such results could possibly be interpreted as the existence of at least an additional fourth sterile neutrino species, mixing with the known active flavors with an associated mass splitting $\\ll 0.1\\ \\mathrm{eV^2}$, and being insensitive to standard weak interactions. Precision measurements at very short baselines (5 to 15 m) with intense MeV electronic antineutrino emitters can be used to probe these anomalies. In this article, the expected antineutrino signal and backgrounds of a generic experiment which consists of deploying an intense beta minus radioactive source inside or in the vicinity of a large liquid scintillator detector are studied. The technical challenges to perform such an experiment are identified, along with quantifying the possible source and detector induced systematics, and their impact on the sensitivity to the observation of neutrino oscillations at short baselines.

  12. Long-Baseline Neutrino Experiment (LBNE)Conceptual Design ReportThe LBNE Water Cherenkov DetectorApril 13 2012

    SciTech Connect (OSTI)

    Kettell S. H.; Bishai, M.; Brown, R.; Chen, H.; Diwan, M.; Dolph, J., Geronimo, G.; Gill, R.; Hackenburg, R.; Hahn, R.; Hans, S.; Isvan, Z.; Jaffe, D.; Junnarkar, S.; Kettell, S.H.; Lanni,F.; Li, Y.; Ling, J.; Littenberg, L.; Makowiecki, D.; Marciano, W.; Morse, W.; Parsa, Z.; Radeka, V.; Rescia, S.; Samios, N.; Sharma, R.; Simos, N.; Sondericker, J.; Stewart, J.; Tanaka, H.; Themann, H.; Thorn, C.; Viren, B., White, S.; Worcester, E.; Yeh, M.; Yu, B.; Zhang, C.

    2012-04-13

    Conceptual Design Report (CDR) developed for the Water Cherekov Detector (WCD) option for the far detector of the Long Baseline Neutrino Experiment (LBNE)

  13. The 2010 Interim Report of the Long-Baseline Neutrino Experiment Collaboration Physics Working Groups

    E-Print Network [OSTI]

    The LBNE Collaboration; T. Akiri; D. Allspach; M. Andrews; K. Arisaka; E. Arrieta-Diaz; M. Artuso; X. Bai; B. Balantekin; B. Baller; W. Barletta; G. Barr; M. Bass; A. Beck; B. Becker; V. Bellini; O. Benhar; B. Berger; M. Bergevin; E. Berman; H. Berns; A. Bernstein; F. Beroz; V. Bhatnagar; B. Bhuyan; R. Bionta; M. Bishai; A. Blake; E. Blaufuss; B. Bleakley; E. Blucher; S. Blusk; D. Boehnlein; T. Bolton; J. Brack; R. Bradford; R. Breedon; C. Bromberg; R. Brown; N. Buchanan; L. Camilleri; M. Campbell; R. Carr; G. Carminati; A. Chen; H. Chen; D. Cherdack; C. Chi; S. Childress; B. Choudhary; E. Church; D. Cline; S. Coleman; R. Corey; M. D'Agostino; G. Davies; S. Dazeley; J. De Jong; B. DeMaat; D. Demuth; A. Dighe; Z. Djurcic; J. Dolph; G. Drake; A. Drozhdin; H. Duan; H. Duyang; S. Dye; T. Dykhuis; D. Edmunds; S. Elliott; S. Enomoto; C. Escobar; J. Felde; F. Feyzi; B. Fleming; J. Fowler; W. Fox; A. Friedland; B. Fujikawa; H. Gallagher; G. Garilli; G. Garvey; V. Gehman; G. Geronimo; R. Gill; M. Goodman; J. Goon; D. Gorbunov; R. Gran; V. Guarino; E. Guarnaccia; R. Guenette; P. Gupta; A. Habig; R. Hackenberg; A. Hahn; R. Hahn; T. Haines; S. Hans; J. Harton; S. Hays; E. Hazen; Q. He; A. Heavey; K. Heeger; R. Hellauer; A. Himmel; G. Horton-Smith; J. Howell; P. Huber; P. Hurh; J. Huston; J. Hylen; J. Insler; D. Jaffe; C. James; C. Johnson; M. Johnson; R. Johnson; W. Johnson; W. Johnston; J. Johnstone; B. Jones; H. Jostlein; T. Junk; S. Junnarkar; R. Kadel; T. Kafka; D. Kaminski; G. Karagiorgi; A. Karle; J. Kaspar; T. Katori; B. Kayser; E. Kearns; S. Kettell; F. Khanam; J. Klein; J. Kneller; G. Koizumi; J. Kopp; S. Kopp; W. Kropp; V. Kudryavtsev; A. Kumar; J. Kumar; T. Kutter; T. Lackowski; K. Lande; C. Lane; K. Lang; F. Lanni; R. Lanza; T. Latorre; J. Learned; D. Lee; K. Lee; Y. Li; S. Linden; J. Ling; J. Link; L. Littenberg; L. Loiacono; T. Liu; J. Losecco; W. Louis; P. Lucas; C. Lunardini; B. Lundberg; T. Lundin; D. Makowiecki; S. Malys; S. Mandal; A. Mann; A. Mann; P. Mantsch; W. Marciano; C. Mariani; J. Maricic; A. Marino; M. Marshak; R. Maruyama; J. Mathews; S. Matsuno; C. Mauger; E. McCluskey; K. McDonald; K. McFarland; R. McKeown; R. McTaggart; R. Mehdiyev; W. Melnitchouk; Y. Meng; B. Mercurio; M. Messier; W. Metcalf; R. Milincic; W. Miller; G. Mills; S. Mishra; S. MoedSher; D. Mohapatra; N. Mokhov; C. Moore; J. Morfin; W. Morse; A. Moss; S. Mufson; J. Musser; D. Naples; J. Napolitano; M. Newcomer; B. Norris; S. Ouedraogo; B. Page; S. Pakvasa; J. Paley; V. Paolone; V. Papadimitriou; Z. Parsa; K. Partyka; Z. Pavlovic; C. Pearson; S. Perasso; R. Petti; R. Plunkett; C. Polly; S. Pordes; R. Potenza; A. Prakash; O. Prokofiev; X. Qian; J. Raaf; V. Radeka; R. Raghavan; R. Rameika; B. Rebel; S. Rescia; D. Reitzner; M. Richardson; K. Riesselman; M. Robinson; M. Rosen; C. Rosenfeld; R. Rucinski; T. Russo; S. Sahijpal; S. Salon; N. Samios; M. Sanchez; R. Schmitt; D. Schmitz; J. Schneps; K. Scholberg; S. Seibert; F. Sergiampietri; M. Shaevitz; P. Shanahan; M. Shaposhnikov; R. Sharma; N. Simos; V. Singh; G. Sinnis; W. Sippach; T. Skwarnicki; M. Smy; H. Sobel; M. Soderberg; J. Sondericker; W. Sondheim; J. Spitz; N. Spooner; M. Stancari; I. Stancu; J. Stewart; P. Stoler; J. Stone; S. Stone; J. Strait; T. Straszheim; S. Striganov; G. Sullivan; R. Svoboda; B. Szczerbinska; A. Szelc; R. Talaga; H. Tanaka; R. Tayloe; D. Taylor; J. Thomas; L. Thompson; M. Thomson; C. Thorn; X. Tian; W. Toki; N. Tolich; M. Tripathi; M. Trovato; H. Tseung; M. Tzanov; J. Urheim; S. Usman; M. Vagins; R. Van Berg; R. Van de Water; G. Varner; K. Vaziri; G. Velev; B. Viren; T. Wachala; C. Walter; H. Wang; Z. Wang; D. Warner; D. Webber; A. Weber; R. Wendell; C. Wendt; M. Wetstein; H. White; S. White; L. Whitehead; W. Willis; R. J. Wilson; L. Winslow; J. Ye; M. Yeh; B. Yu; G. Zeller; C. Zhang; E. Zimmerman; R. Zwaska

    2011-10-27

    In early 2010, the Long-Baseline Neutrino Experiment (LBNE) science collaboration initiated a study to investigate the physics potential of the experiment with a broad set of different beam, near- and far-detector configurations. Nine initial topics were identified as scientific areas that motivate construction of a long-baseline neutrino experiment with a very large far detector. We summarize the scientific justification for each topic and the estimated performance for a set of far detector reference configurations. We report also on a study of optimized beam parameters and the physics capability of proposed Near Detector configurations. This document was presented to the collaboration in fall 2010 and updated with minor modifications in early 2011.

  14. Estimating matter induced CPT violation in Long-Baseline Neutrino Experiments

    E-Print Network [OSTI]

    Monika Randhawa; Mandip Singh; Manmohan Gupta

    2014-12-16

    We examine matter induced CPT violation effects in long baseline electron neutrino appearance experiments in a low energy neutrino factory setup. Assuming CPT invariance in vacuum, the magnitude of CPT violating asymmetry in matter has been estimated using the exact expressions for the transition probabilities. The dependence of the asymmetry on the oscillation parameters like mixing angles, mass squared differences as well as on the Dirac CP violating phase has been investigated.

  15. PROSPECT - A Precision Reactor Oscillation and Spectrum Experiment at Short Baselines

    E-Print Network [OSTI]

    J. Ashenfelter; A. B. Balantekin; H. R. Band; G. Barclay; C. Bass; N. S. Bowden; C. D. Bryan; J. J. Cherwinka; R. Chu; T. Classen; D. Davee; D. Dean; G. Deichert; M. Diwan; M. J. Dolinski; J. Dolph; D. A. Dwyer; Y. Efremenko; S. Fan; A. Galindo-Uribarri; K. Gilje; A. Glenn; M. Green; K. Han; S. Hans; K. M. Heeger; B. Heffron; L. Hu; P. Huber; D. E. Jaffe; Y. Kamyshkov; S. Kettell; C. Lane; T. J. Langford; B. R. Littlejohn; D. Martinez; R. D. McKeown; M. P. Mendenhall; S. Morrell; P. Mueller; H. P. Mumm; J. Napolitano; J. S. Nico; D. Norcini; D. Pushin; X. Qian; E. Romero; R. Rosero; B. S. Seilhan; R. Sharma; P. T. Surukuchi; S. J. Thompson; R. L. Varner; B. Viren; W. Wang; B. White; C. White; J. Wilhelmi; C. Williams; R. E. Williams; T. Wise; H. Yao; M. Yeh; N. Zaitseva; C. Zhang; X. Zhang

    2015-01-27

    Current models of antineutrino production in nuclear reactors predict detection rates and spectra at odds with the existing body of direct reactor antineutrino measurements. High-resolution antineutrino detectors operated close to compact research reactor cores can produce new precision measurements useful in testing explanations for these observed discrepancies involving underlying nuclear or new physics. Absolute measurement of the 235U-produced antineutrino spectrum can provide additional constraints for evaluating the accuracy of current and future reactor models, while relative measurements of spectral distortion between differing baselines can be used to search for oscillations arising from the existence of eV-scale sterile neutrinos. Such a measurement can be performed in the United States at several highly-enriched uranium fueled research reactors using near-surface segmented liquid scintillator detectors. We describe here the conceptual design and physics potential of the PROSPECT experiment, a U.S.-based, multi-phase experiment with reactor-detector baselines of 7-20 meters capable of addressing these and other physics and detector development goals. Current R&D status and future plans for PROSPECT detector deployment and data-taking at the High Flux Isotope Reactor at Oak Ridge National Laboratory will be discussed.

  16. Appendix D Instrumentation and equipment This appendix contains the tables of instrumentation and equipment used in the Griffin field experiment. For each sensor/instrument the

    E-Print Network [OSTI]

    Appendix D Instrumentation and equipment This appendix contains the tables of instrumentation and equipment used in the Griffin field experiment. For each sensor/instrument the manufacturer and item serial / #020 Gill Instruments Cup anemometer Wind speed - analogue 0.00421 0.2041 U = V Denominator

  17. Two experiments for the price of one? -- The role of the second oscillation maximum in long baseline neutrino experiments

    E-Print Network [OSTI]

    Patrick Huber; Joachim Kopp

    2011-05-09

    We investigate the quantitative impact that data from the second oscillation maximum has on the performance of wide band beam neutrino oscillation experiments. We present results for the physics sensitivities to standard three flavor oscillation, as well as results for the sensitivity to non-standard interactions. The quantitative study is performed using an experimental setup similar to the Fermilab to DUSEL Long Baseline Neutrino Experiment (LBNE). We find that, with the single exception of sensitivity to the mass hierarchy, the second maximum plays only a marginal role due to the experimental difficulties to obtain a statistically significant and sufficiently background-free event sample at low energies. This conclusion is valid for both water Cherenkov and liquid argon detectors. Moreover, we confirm that non-standard neutrino interactions are very hard to distinguish experimentally from standard three-flavor effects and can lead to a considerable loss of sensitivity to \\theta_{13}, the mass hierarchy and CP violation.

  18. A Long Baseline Neutrino Oscillation Experiment Using J-PARC Neutrino Beam and Hyper-Kamiokande

    E-Print Network [OSTI]

    Hyper-Kamiokande Working Group; :; K. Abe; H. Aihara; C. Andreopoulos; I. Anghel; A. Ariga; T. Ariga; R. Asfandiyarov; M. Askins; J. J. Back; P. Ballett; M. Barbi; G. J. Barker; G. Barr; F. Bay; P. Beltrame; V. Berardi; M. Bergevin; S. Berkman; T. Berry; S. Bhadra; F. d. M. Blaszczyk; A. Blondel; S. Bolognesi; S. B. Boyd; A. Bravar; C. Bronner; F. S. Cafagna; G. Carminati; S. L. Cartwright; M. G. Catanesi; K. Choi; J. H. Choi; G. Collazuol; G. Cowan; L. Cremonesi; G. Davies; G. De Rosa; C. Densham; J. Detwiler; D. Dewhurst; F. Di Lodovico; S. Di Luise; O. Drapier; S. Emery; A. Ereditato; P. Fernandez; T. Feusels; A. Finch; M. Fitton; M. Friend; Y. Fujii; Y. Fukuda; D. Fukuda; V. Galymov; K. Ganezer; M. Gonin; P. Gumplinger; D. R. Hadley; L. Haegel; A. Haesler; Y. Haga; B. Hartfiel; M. Hartz; Y. Hayato; M. Hierholzer; J. Hill; A. Himmel; S. Hirota; S. Horiuchi; K. Huang; A. K. Ichikawa; T. Iijima; M. Ikeda; J. Imber; K. Inoue; J. Insler; R. A. Intonti; T. Irvine; T. Ishida; H. Ishino; M. Ishitsuka; Y. Itow; A. Izmaylov; B. Jamieson; H. I. Jang; M. Jiang; K. K. Joo; C. K. Jung; A. Kaboth; T. Kajita; J. Kameda; Y. Karadhzov; T. Katori; E. Kearns; M. Khabibullin; A. Khotjantsev; J. Y. Kim; S. B. Kim; Y. Kishimoto; T. Kobayashi; M. Koga; A. Konaka; L. L. Kormos; A. Korzenev; Y. Koshio; W. R. Kropp; Y. Kudenko; T. Kutter; M. Kuze; L. Labarga; J. Lagoda; M. Laveder; M. Lawe; J. G. Learned; I. T. Lim; T. Lindner; A. Longhin; L. Ludovici; W. Ma; L. Magaletti; K. Mahn; M. Malek; C. Mariani; L. Marti; J. F. Martin; C. Martin; P. P. J. Martins; E. Mazzucato; N. McCauley; K. S. McFarland; C. McGrew; M. Mezzetto; H. Minakata; A. Minamino; S. Mine; O. Mineev; M. Miura; J. Monroe; T. Mori; S. Moriyama; T. Mueller; F. Muheim; M. Nakahata; K. Nakamura; T. Nakaya; S. Nakayama; M. Needham; T. Nicholls; M. Nirkko; Y. Nishimura; E. Noah; J. Nowak; H. Nunokawa; H. M. O'Keeffe; Y. Okajima; K. Okumura; S. M. Oser; E. O'Sullivan; R. A. Owen; Y. Oyama; J. Perez; M. Y. Pac; V. Palladino; J. L. Palomino; V. Paolone; D. Payne; O. Perevozchikov; J. D. Perkin; C. Pistillo; S. Playfer; M. Posiadala-Zezula; J. -M. Poutissou; B. Quilain; M. Quinto; E. Radicioni; P. N. Ratoff; M. Ravonel; M. Rayner; A. Redij; F. Retiere; C. Riccio; E. Richard; E. Rondio; H. J. Rose; M. Ross-Lonergan; C. Rott; S. D. Rountree; A. Rubbia; R. Sacco; M. Sakuda; M. C. Sanchez; E. Scantamburlo; K. Scholberg; M. Scott; Y. Seiya; T. Sekiguchi; H. Sekiya; A. Shaikhiev; I. Shimizu; M. Shiozawa; S. Short; G. Sinnis; M. B. Smy; J. Sobczyk; H. W. Sobel; T. Stewart; J. L. Stone; Y. Suda; Y. Suzuki; A. T. Suzuki; R. Svoboda; R. Tacik; A. Takeda; A. Taketa; Y. Takeuchi; H. A. Tanaka; H. K. M. Tanaka; H. Tanaka; R. Terri; L. F. Thompson; M. Thorpe; S. Tobayama; N. Tolich; T. Tomura; C. Touramanis; T. Tsukamoto; M. Tzanov; Y. Uchida; M. R. Vagins; G. Vasseur; R. B. Vogelaar; C. W. Walter; D. Wark; M. O. Wascko; A. Weber; R. Wendell; R. J. Wilkes; M. J. Wilking; J. R. Wilson; T. Xin; K. Yamamoto; C. Yanagisawa; T. Yano; S. Yen; N. Yershov; M. Yokoyama; M. Zito

    2015-01-18

    Hyper-Kamiokande will be a next generation underground water Cherenkov detector with a total (fiducial) mass of 0.99 (0.56) million metric tons, approximately 20 (25) times larger than that of Super-Kamiokande. One of the main goals of Hyper-Kamiokande is the study of $CP$ asymmetry in the lepton sector using accelerator neutrino and anti-neutrino beams. In this document, the physics potential of a long baseline neutrino experiment using the Hyper-Kamiokande detector and a neutrino beam from the J-PARC proton synchrotron is presented. The analysis has been updated from the previous Letter of Intent [K. Abe et al., arXiv:1109.3262 [hep-ex

  19. The Long-Baseline Neutrino Experiment: Exploring Fundamental Symmetries of the Universe

    E-Print Network [OSTI]

    LBNE Collaboration; Corey Adams; David Adams; Tarek Akiri; Tyler Alion; Kris Anderson; Costas Andreopoulos; Mike Andrews; Ioana Anghel; Joăo Carlos Costa dos Anjos; Maddalena Antonello; Enrique Arrieta-Diaz; Marina Artuso; Jonathan Asaadi; Xinhua Bai; Bagdat Baibussinov; Michael Baird; Baha Balantekin; Bruce Baller; Brian Baptista; D'Ann Barker; Gary Barker; William A. Barletta; Giles Barr; Larry Bartoszek; Amit Bashyal; Matt Bass; Vincenzo Bellini; Pietro Angelo Benetti; Bruce E. Berger; Marc Bergevin; Eileen Berman; Hans-Gerd Berns; Adam Bernstein; Robert Bernstein; Babu Bhandari; Vipin Bhatnagar; Bipul Bhuyan; Jianming Bian; Mary Bishai; Andrew Blake; Flor Blaszczyk; Erik Blaufuss; Bruce Bleakley; Edward Blucher; Steve Blusk; Virgil Bocean; F. Boffelli; Jan Boissevain; Timothy Bolton; Maurizio Bonesini; Steve Boyd; Andrew Brandt; Richard Breedon; Carl Bromberg; Ralph Brown; Giullia Brunetti; Norman Buchanan; Bill Bugg; Jerome Busenitz; E. Calligarich; Leslie Camilleri; Giada Carminati; Rachel Carr; Cesar Castromonte; Flavio Cavanna; Sandro Centro; Alex Chen; Hucheng Chen; Kai Chen; Daniel Cherdack; Cheng-Yi Chi; Sam Childress; Brajesh Chandra Choudhary; Georgios Christodoulou; Cabot-Ann Christofferson; Eric Church; David Cline; Thomas Coan; Alfredo Cocco; Joao Coelho; Stephen Coleman; Janet M. Conrad; Mark Convery; Robert Corey; Luke Corwin; Jack Cranshaw; Daniel Cronin-Hennessy; A. Curioni; Helio da Motta; Tristan Davenne; Gavin S. Davies; Steven Dazeley; Kaushik De; Andre de Gouvea; Jeffrey K. de Jong; David Demuth; Chris Densham; Milind Diwan; Zelimir Djurcic; R. Dolfini; Jeffrey Dolph; Gary Drake; Stephen Dye; Hongue Dyuang; Daniel Edmunds; Steven Elliott; Muhammad Elnimr; Sarah Eno; Sanshiro Enomoto; Carlos O. Escobar; Justin Evans; A. Falcone; Lisa Falk; Amir Farbin; Christian Farnese; Angela Fava; John Felde; S. Fernandes; Fernando Ferroni; Farshid Feyzi; Laura Fields; Alex Finch; Mike Fitton; Bonnie Fleming; Jack Fowler; Walt Fox; Alex Friedland; Stu Fuess; Brian Fujikawa; Hugh Gallagher; Raj Gandhi; Gerald Garvey; Victor M. Gehman; Gianluigi de Geronimo; Daniele Gibin; Ronald Gill; Ricardo A. Gomes; Maury C. Goodman; Jason Goon; Nicholas Graf; Mathew Graham; Rik Gran; Christopher Grant; Nick Grant; Herbert Greenlee; Leland Greenler; Sean Grullon; Elena Guardincerri; Victor Guarino; Evan Guarnaccia; Germano Guedes; Roxanne Guenette; Alberto Guglielmi; Marcelo M. Guzzo; Alec T. Habig; Robert W. Hackenburg; Haleh Hadavand; Alan Hahn; Martin Haigh; Todd Haines; Thomas Handler; Sunej Hans; Jeff Hartnell; John Harton; Robert Hatcher; Athans Hatzikoutelis; Steven Hays; Eric Hazen; Mike Headley; Anne Heavey; Karsten Heeger; Jaret Heise; Robert Hellauer; Jeremy Hewes; Alexander Himmel; Matthew Hogan; Pedro Holanda; Anna Holin; Glenn Horton-Smith; Joe Howell; Patrick Hurh; Joey Huston; James Hylen; Richard Imlay; Jonathan Insler; G. Introzzi; Zeynep Isvan; Chris Jackson; John Jacobsen; David E. Jaffe; Cat James; Chun-Min Jen; Marvin Johnson; Randy Johnson; Robert Johnson; Scott Johnson; William Johnston; John Johnstone; Ben J. P. Jones; H. Jostlein; Thomas Junk; Richard Kadel; Karl Kaess; Georgia Karagiorgi; Jarek Kaspar; Teppei Katori; Boris Kayser; Edward Kearns; Paul Keener; Ernesto Kemp; Steve H. Kettell; Mike Kirby; Joshua Klein; Gordon Koizumi; Sacha Kopp; Laura Kormos; William Kropp; Vitaly A. Kudryavtsev; Ashok Kumar; Jason Kumar; Thomas Kutter; Franco La Zia; Kenneth Lande; Charles Lane; Karol Lang; Francesco Lanni; Richard Lanza; Tony Latorre; John Learned; David Lee; Kevin Lee; Qizhong Li; Shaorui Li; Yichen Li; Zepeng Li; Jiang Libo; Steve Linden; Jiajie Ling; Jonathan Link; Laurence Littenberg; Hu Liu; Qiuguang Liu; Tiankuan Liu; John Losecco; William Louis; Byron Lundberg; Tracy Lundin; Jay Lundy; Ana Amelia Machado; Cara Maesano; Steve Magill; George Mahler; David Malon; Stephen Malys; Francesco Mammoliti; Samit Kumar Mandal; Anthony Mann; Paul Mantsch; Alberto Marchionni; William Marciano; Camillo Mariani; Jelena Maricic; Alysia Marino; Marvin Marshak; John Marshall; Shiegenobu Matsuno; Christopher Mauger; Konstantinos Mavrokoridis; Nate Mayer; Neil McCauley; Elaine McCluskey; Kirk McDonald; Kevin McFarland; David McKee; Robert McKeown; Robert McTaggart; Rashid Mehdiyev; Dongming Mei; A. Menegolli; Guang Meng; Yixiong Meng; David Mertins; Mark Messier; William Metcalf; Radovan Milincic; William Miller; Geoff Mills; Sanjib R. Mishra; Nikolai Mokhov; Claudio Montanari; David Montanari; Craig Moore; Jorge Morfin; Ben Morgan; William Morse; Zander Moss; Célio A. Moura; Stuart Mufson; David Muller; Jim Musser; Donna Naples; Jim Napolitano; Mitch Newcomer; Ryan Nichol; Tim Nicholls; Evan Niner; Barry Norris

    2014-04-22

    The preponderance of matter over antimatter in the early Universe, the dynamics of the supernova bursts that produced the heavy elements necessary for life and whether protons eventually decay --- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our Universe, its current state and its eventual fate. The Long-Baseline Neutrino Experiment (LBNE) represents an extensively developed plan for a world-class experiment dedicated to addressing these questions. LBNE is conceived around three central components: (1) a new, high-intensity neutrino source generated from a megawatt-class proton accelerator at Fermi National Accelerator Laboratory, (2) a near neutrino detector just downstream of the source, and (3) a massive liquid argon time-projection chamber deployed as a far detector deep underground at the Sanford Underground Research Facility. This facility, located at the site of the former Homestake Mine in Lead, South Dakota, is approximately 1,300 km from the neutrino source at Fermilab -- a distance (baseline) that delivers optimal sensitivity to neutrino charge-parity symmetry violation and mass ordering effects. This ambitious yet cost-effective design incorporates scalability and flexibility and can accommodate a variety of upgrades and contributions. With its exceptional combination of experimental configuration, technical capabilities, and potential for transformative discoveries, LBNE promises to be a vital facility for the field of particle physics worldwide, providing physicists from around the globe with opportunities to collaborate in a twenty to thirty year program of exciting science. In this document we provide a comprehensive overview of LBNE's scientific objectives, its place in the landscape of neutrino physics worldwide, the technologies it will incorporate and the capabilities it will possess.

  20. Beamline Instrumentation for Future Parity-Violation Experiments

    E-Print Network [OSTI]

    Robert Michaels

    2014-10-16

    The parity-violating electron scattering community has made tremendous progress over the last twenty five years in their ability to measure tiny asymmetries of order 100 parts per billion (ppb) with beam-related corrections and systematic errors of a few ppb. Future experiments are planned for about an order of magnitude smaller asymmetries and with higher rates in the detectors. These new experiments pose new challenges for the beam instrumentation and for the strategy for setting up the beam. In this contribution to PAVI14 I discuss several of these challenges and demands, with a focus on developments at Jefferson Lab.

  1. Optimization of neutrino fluxes for future long baseline neutrino oscillation experiments

    E-Print Network [OSTI]

    M. Calviani; S. Di Luise; V. Galymov; P. Velten

    2014-11-10

    One of the main goals of the Long Baseline Neutrino Oscillation experiment (LBNO) experiment is to study the L/E behaviour of the electron neutrino appearance probability in order to determine the unknown phase $\\delta_{CP}$. In the standard neutrino 3-flavour mixing paradigm, this parameter encapsulates a possibility of a CP violation in the lepton sector that in turn could help explain the matter-antimatter asymmetry in the universe. In LBNO, the measurement of $\\delta_{CP}$ would rely on the observation of the electron appearance probability in a broad energy range covering the 1$^{st}$ and 2$^{nd}$ maxima of the oscillation probability. An optimization of the energy spectrum of the neutrino beam is necessary to find the best coverage of the neutrino energies of interest. This in general is a complex task that requires exploring a large parameter space describing hadron target and beamline focusing elements. In this paper we will present a numerical approach of finding a solution to this difficult optimization problem often encountered in design of modern neutrino beamlines and we will show the improved LBNO sensitivity to the presence of the leptonic CP violation attained after the neutrino beam optimization.

  2. Super-NO{nu}A: A long-baseline neutrino experiment with two off-axis detectors

    SciTech Connect (OSTI)

    Requejo, Olga Mena [Theoretical Physics Department, Fermi National Accelerator Laboratory, Batavia, Illinois 60510-0500 (United States); Palomares-Ruiz, Sergio [Department of Physics and Astronomy, Vanderbilt University, Nashville, Tennessee 37235 (United States); Pascoli, Silvia [Physics Department, Theory Division, CERN, CH-1211 Geneva 23 (Switzerland)

    2005-09-01

    Establishing the neutrino mass hierarchy is one of the fundamental questions that will have to be addressed in the near future. Its determination could be obtained with long-baseline experiments but typically suffers from degeneracies with other neutrino parameters. We consider here the NO{nu}A experiment configuration and propose to place a second off-axis detector, with a shorter baseline, such that, by exploiting matter effects, the type of neutrino mass hierarchy could be determined with only the neutrino run. We show that the determination of this parameter is free of degeneracies, provided the ratio L/E, where L is the baseline and E is the neutrino energy, is the same for both detectors.

  3. Long-Baseline Neutrino Experiment (LBNE) Water Cherenkov Detector Schedule and Cost Books LBNE Far Site Internal Review(December 6-9,2011)

    SciTech Connect (OSTI)

    Stewart J.; Diwan, M.; Dolph, J.; Novakova, P.; Sharma, R.; Stewart, J.; Viren, B.; Russo, T.; Kaducak, M.; Mantsch, P.; Paulos, B.; Feyzi, F.; Sullivan, G.; Bionta, R.; Fowler, J.; Warner, D.; Bahowick, S.; Van Berg, R.; Kearns, E.; Hazen, E.; Sinnis, G.; Sanchez, M.

    2011-12-09

    Schedule and Cost Books developed for the Water Cherenkov Detector (WCD) option for the far detector of the Long Baseline Neutrino Experiment (LBNE)

  4. Long-Baseline Neutrino Experiment (LBNE)Water Cherenkov Detector Basis of Estimate Forms and Backup Documentation LBNE Far Site Internal Review (December 6-9, 2011)

    SciTech Connect (OSTI)

    Stewart J.; Diwan, M.; Dolph, J.; Novakova, P.; Sharma, R.; Stewart, J.; Viren, B.; Russo, T.; Kaducak, M.; Mantsch, P.; Paulos, B.; Feyzi, F.; Sullivan, G.; Bionta, R.; Fowler, J.; Warner, D.; Bahowick, S.; Van Berg, R.; Kearns, E.; Hazen, E.; Sinnis, G.; Sanchez, M.

    2011-12-09

    Basis of Estimate (BOE) forms and backup documentation developed for the Water Cherenkov Detector (WCD) option for the far detector of the Long Baseline Neutrino Experiment (LBNE)

  5. Contemporary Instrumentation and Application of Charge Exchange Neutral Particle Diagnostics in Magnetic Fusion Experiments

    SciTech Connect (OSTI)

    Medley, S. S.; Donné, A. J.H.; Kaita, R.; Kislyakov, A. I.; Petrov, M. P.; Roquemore, A. L.

    2007-07-21

    An overview of the developments post-circa 1980's of the instrumentation and application of charge exchange neutral particle diagnostics on Magnetic Fusion Energy experiments is presented.

  6. ARM - AMF1 Baseline Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.TheoryTuesday, August 10, 20102016 NewsUsers' Executive09AzoresAMF Science

  7. ARM - AMF2 Baseline Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.TheoryTuesday, August 10, 20102016 NewsUsers' Executive09AzoresAMFBaseline

  8. ARM - AMF3 Baseline Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.TheoryTuesday, August 10, 20102016 NewsUsers'Organization and Contact Information

  9. Intern experience at the Honeywell Test Instrument Division: an internship report 

    E-Print Network [OSTI]

    Sengupta, Debasis, 1949-

    2013-03-13

    This report documents the industrial experience accrued by the author during a twelve month Doctor of Engineering internship served with Honeywell. The internship was served at the Test Instrument Division, ...

  10. Instrumentation for slope stability -- Experience from an urban area

    SciTech Connect (OSTI)

    Flentje, P.; Chowdhury, R.

    1999-07-01

    This paper describes the monitoring of several existing landslides in an urban area near Wollongong in the state of New South Wales, Australia. A brief overview of topography and geology is given and reference is made to the types of slope movement, processes and causal factors. Often the slope movements are extremely slow and imperceptible to the eye, and catastrophic failures are quite infrequent. However, cumulative movements at these slower rates do, over time, cause considerable distress to structures and disrupt residential areas and transport routes. Inclinometers and piezometers have been installed at a number of locations and monitoring of these has been very useful. The performance of instrumentation at different sites is discussed in relation to the monitoring of slope movements and pore pressures. Interval rates of inclinometer shear displacement have been compared with various periods of cumulative rainfall to assess the relationships.

  11. Physics Potential of a Long Baseline Neutrino Oscillation Experiment Using J-PARC Neutrino Beam and Hyper-Kamiokande

    E-Print Network [OSTI]

    Abe, K; Andreopoulos, C; Anghel, I; Ariga, A; Ariga, T; Asfandiyarov, R; Askins, M; Back, J J; Ballett, P; Barbi, M; Barker, G J; Barr, G; Bay, F; Beltrame, P; Berardi, V; Bergevin, M; Berkman, S; Berry, T; Bhadra, S; Blaszczyk, F d M; Blondel, A; Bolognesi, S; Boyd, S B; Bravar, A; Bronner, C; Cafagna, F S; Carminati, G; Cartwright, S L; Catanesi, M G; Choi, K; Choi, J H; Collazuol, G; Cowan, G; Cremonesi, L; Davies, G; De Rosa, G; Densham, C; Detwiler, J; Dewhurst, D; Di Lodovico, F; Di Luise, S; Drapier, O; Emery, S; Ereditato, A; Fernández, P; Feusels, T; Finch, A; Fitton, M; Friend, M; Fujii, Y; Fukuda, Y; Fukuda, D; Galymov, V; Ganezer, K; Gonin, M; Gumplinger, P; Hadley, D R; Haegel, L; Haesler, A; Haga, Y; Hartfiel, B; Hartz, M; Hayato, Y; Hierholzer, M; Hill, J; Himmel, A; Hirota, S; Horiuchi, S; Huang, K; Ichikawa, A K; Iijima, T; Ikeda, M; Imber, J; Inoue, K; Insler, J; Intonti, R A; Irvine, T; Ishida, T; Ishino, H; Ishitsuka, M; Itow, Y; Izmaylov, A; Jamieson, B; Jang, H I; Jiang, M; Joo, K K; Jung, C K; Kaboth, A; Kajita, T; Kameda, J; Karadhzov, Y; Katori, T; Kearns, E; Khabibullin, M; Khotjantsev, A; Kim, J Y; Kim, S B; Kishimoto, Y; Kobayashi, T; Koga, M; Konaka, A; Kormos, L L; Korzenev, A; Koshio, Y; Kropp, W R; Kudenko, Y; Kutter, T; Kuze, M; Labarga, L; Lagoda, J; Laveder, M; Lawe, M; Learned, J G; Lim, I T; Lindner, T; Longhin, A; Ludovici, L; Ma, W; Magaletti, L; Mahn, K; Malek, M; Mariani, C; Marti, L; Martin, J F; Martin, C; Martins, P P J; Mazzucato, E; McCauley, N; McFarland, K S; McGrew, C; Mezzetto, M; Minakata, H; Minamino, A; Mine, S; Mineev, O; Miura, M; Monroe, J; Mori, T; Moriyama, S; Mueller, T; Muheim, F; Nakahata, M; Nakamura, K; Nakaya, T; Nakayama, S; Needham, M; Nicholls, T; Nirkko, M; Nishimura, Y; Noah, E; Nowak, J; Nunokawa, H; O'Keeffe, H M; Okajima, Y; Okumura, K; Oser, S M; O'Sullivan, E; Ovsiannikova, T; Owen, R A; Oyama, Y; Pérez, J; Pac, M Y; Palladino, V; Palomino, J L; Paolone, V; Payne, D; Perevozchikov, O; Perkin, J D; Pistillo, C; Playfer, S; Posiadala-Zezula, M; Poutissou, J -M; Quilain, B; Quinto, M; Radicioni, E; Ratoff, P N; Ravonel, M; Rayner, M A; Redij, A; Retiere, F; Riccio, C; Richard, E; Rondio, E; Rose, H J; Ross-Lonergan, M; Rott, C; Rountree, S D; Rubbia, A; Sacco, R; Sakuda, M; Sanchez, M C; Scantamburlo, E; Scholberg, K; Scott, M; Seiya, Y; Sekiguchi, T; Sekiya, H; Shaikhiev, A; Shimizu, I; Shiozawa, M; Short, S; Sinnis, G; Smy, M B; Sobczyk, J; Sobel, H W; Stewart, T; Stone, J L; Suda, Y; Suzuki, Y; Suzuki, A T; Svoboda, R; Tacik, R; Takeda, A; Taketa, A; Takeuchi, Y; Tanaka, H A; Tanaka, H K M; Tanaka, H; Terri, R; Thompson, L F; Thorpe, M; Tobayama, S; Tolich, N; Tomura, T; Touramanis, C; Tsukamoto, T; Tzanov, M; Uchida, Y; Vagins, M R; Vasseur, G; Vogelaar, R B; Walter, C W; Wark, D; Wascko, M O; Weber, A; Wendell, R; Wilkes, R J; Wilking, M J; Wilson, J R; Xin, T; Yamamoto, K; Yanagisawa, C; Yano, T; Yen, S; Yershov, N; Yokoyama, M; Zito, M

    2015-01-01

    Hyper-Kamiokande will be a next generation underground water Cherenkov detector with a total (fiducial) mass of 0.99 (0.56) million metric tons, approximately 20 (25) times larger than that of Super-Kamiokande. One of the main goals of Hyper-Kamiokande is the study of $CP$ asymmetry in the lepton sector using accelerator neutrino and anti-neutrino beams. In this paper, the physics potential of a long baseline neutrino experiment using the Hyper-Kamiokande detector and a neutrino beam from the J-PARC proton synchrotron is presented. The analysis uses the framework and systematic uncertainties derived from the ongoing T2K experiment. With a total exposure of 7.5 MW $\\times$ 10$^7$ sec integrated proton beam power (corresponding to $1.56\\times10^{22}$ protons on target with a 30 GeV proton beam) to a $2.5$-degree off-axis neutrino beam, it is expected that the leptonic $CP$ phase $\\delta_{CP}$ can be determined to better than 19 degrees for all possible values of $\\delta_{CP}$, and $CP$ violation can be establis...

  12. Physics Potential of a Long Baseline Neutrino Oscillation Experiment Using J-PARC Neutrino Beam and Hyper-Kamiokande

    E-Print Network [OSTI]

    Hyper-Kamiokande Proto-Collaboraion; :; K. Abe; H. Aihara; C. Andreopoulos; I. Anghel; A. Ariga; T. Ariga; R. Asfandiyarov; M. Askins; J. J. Back; P. Ballett; M. Barbi; G. J. Barker; G. Barr; F. Bay; P. Beltrame; V. Berardi; M. Bergevin; S. Berkman; T. Berry; S. Bhadra; F. d. M. Blaszczyk; A. Blondel; S. Bolognesi; S. B. Boyd; A. Bravar; C. Bronner; F. S. Cafagna; G. Carminati; S. L. Cartwright; M. G. Catanesi; K. Choi; J. H. Choi; G. Collazuol; G. Cowan; L. Cremonesi; G. Davies; G. De Rosa; C. Densham; J. Detwiler; D. Dewhurst; F. Di Lodovico; S. Di Luise; O. Drapier; S. Emery; A. Ereditato; P. Fernández; T. Feusels; A. Finch; M. Fitton; M. Friend; Y. Fujii; Y. Fukuda; D. Fukuda; V. Galymov; K. Ganezer; M. Gonin; P. Gumplinger; D. R. Hadley; L. Haegel; A. Haesler; Y. Haga; B. Hartfiel; M. Hartz; Y. Hayato; M. Hierholzer; J. Hill; A. Himmel; S. Hirota; S. Horiuchi; K. Huang; A. K. Ichikawa; T. Iijima; M. Ikeda; J. Imber; K. Inoue; J. Insler; R. A. Intonti; T. Irvine; T. Ishida; H. Ishino; M. Ishitsuka; Y. Itow; A. Izmaylov; B. Jamieson; H. I. Jang; M. Jiang; K. K. Joo; C. K. Jung; A. Kaboth; T. Kajita; J. Kameda; Y. Karadhzov; T. Katori; E. Kearns; M. Khabibullin; A. Khotjantsev; J. Y. Kim; S. B. Kim; Y. Kishimoto; T. Kobayashi; M. Koga; A. Konaka; L. L. Kormos; A. Korzenev; Y. Koshio; W. R. Kropp; Y. Kudenko; T. Kutter; M. Kuze; L. Labarga; J. Lagoda; M. Laveder; M. Lawe; J. G. Learned; I. T. Lim; T. Lindner; A. Longhin; L. Ludovici; W. Ma; L. Magaletti; K. Mahn; M. Malek; C. Mariani; L. Marti; J. F. Martin; C. Martin; P. P. J. Martins; E. Mazzucato; N. McCauley; K. S. McFarland; C. McGrew; M. Mezzetto; H. Minakata; A. Minamino; S. Mine; O. Mineev; M. Miura; J. Monroe; T. Mori; S. Moriyama; T. Mueller; F. Muheim; M. Nakahata; K. Nakamura; T. Nakaya; S. Nakayama; M. Needham; T. Nicholls; M. Nirkko; Y. Nishimura; E. Noah; J. Nowak; H. Nunokawa; H. M. O'Keeffe; Y. Okajima; K. Okumura; S. M. Oser; E. O'Sullivan; T. Ovsiannikova; R. A. Owen; Y. Oyama; J. Pérez; M. Y. Pac; V. Palladino; J. L. Palomino; V. Paolone; D. Payne; O. Perevozchikov; J. D. Perkin; C. Pistillo; S. Playfer; M. Posiadala-Zezula; J. -M. Poutissou; B. Quilain; M. Quinto; E. Radicioni; P. N. Ratoff; M. Ravonel; M. A. Rayner; A. Redij; F. Retiere; C. Riccio; E. Richard; E. Rondio; H. J. Rose; M. Ross-Lonergan; C. Rott; S. D. Rountree; A. Rubbia; R. Sacco; M. Sakuda; M. C. Sanchez; E. Scantamburlo; K. Scholberg; M. Scott; Y. Seiya; T. Sekiguchi; H. Sekiya; A. Shaikhiev; I. Shimizu; M. Shiozawa; S. Short; G. Sinnis; M. B. Smy; J. Sobczyk; H. W. Sobel; T. Stewart; J. L. Stone; Y. Suda; Y. Suzuki; A. T. Suzuki; R. Svoboda; R. Tacik; A. Takeda; A. Taketa; Y. Takeuchi; H. A. Tanaka; H. K. M. Tanaka; H. Tanaka; R. Terri; L. F. Thompson; M. Thorpe; S. Tobayama; N. Tolich; T. Tomura; C. Touramanis; T. Tsukamoto; M. Tzanov; Y. Uchida; M. R. Vagins; G. Vasseur; R. B. Vogelaar; C. W. Walter; D. Wark; M. O. Wascko; A. Weber; R. Wendell; R. J. Wilkes; M. J. Wilking; J. R. Wilson; T. Xin; K. Yamamoto; C. Yanagisawa; T. Yano; S. Yen; N. Yershov; M. Yokoyama; M. Zito

    2015-03-31

    Hyper-Kamiokande will be a next generation underground water Cherenkov detector with a total (fiducial) mass of 0.99 (0.56) million metric tons, approximately 20 (25) times larger than that of Super-Kamiokande. One of the main goals of Hyper-Kamiokande is the study of $CP$ asymmetry in the lepton sector using accelerator neutrino and anti-neutrino beams. In this paper, the physics potential of a long baseline neutrino experiment using the Hyper-Kamiokande detector and a neutrino beam from the J-PARC proton synchrotron is presented. The analysis uses the framework and systematic uncertainties derived from the ongoing T2K experiment. With a total exposure of 7.5 MW $\\times$ 10$^7$ sec integrated proton beam power (corresponding to $1.56\\times10^{22}$ protons on target with a 30 GeV proton beam) to a $2.5$-degree off-axis neutrino beam, it is expected that the leptonic $CP$ phase $\\delta_{CP}$ can be determined to better than 19 degrees for all possible values of $\\delta_{CP}$, and $CP$ violation can be established with a statistical significance of more than $3\\,\\sigma$ ($5\\,\\sigma$) for $76\\%$ ($58\\%$) of the $\\delta_{CP}$ parameter space. Using both $\

  13. Precision measurement of solar neutrino oscillation parameters by a long-baseline reactor neutrino experiment in Europe

    E-Print Network [OSTI]

    S. T. Petcov; T. Schwetz

    2006-07-13

    We consider the determination of the solar neutrino oscillation parameters $\\Delta m^2_{21}$ and $\\theta_{12}$ by studying oscillations of reactor anti-neutrinos emitted by nuclear power plants (located mainly in France) with a detector installed in the Frejus underground laboratory. The performances of a water Cerenkov detector of 147 kt fiducial mass doped with 0.1% of Gadolinium (MEMPHYS-Gd) and of a 50 kt scale liquid scintillator detector (LENA) are compared. In both cases 3$\\sigma$ uncertainties below 3% on $\\Delta m^2_{21}$ and of about 20% on $\\sin^2\\theta_{12}$ can be obtained after one year of data taking. The Gadolinium doped Super-Kamiokande detector (SK-Gd) in Japan can reach a similar precision if the SK/MEMPHYS fiducial mass ratio of 1 to 7 is compensated by a longer SK-Gd data taking time. Several years of reactor neutrino data collected by MEMPHYS-Gd or LENA would allow a determination of $\\Delta m^2_{21}$ and $\\sin^2\\theta_{12}$ with uncertainties of approximately 1% and 10% at 3$\\sigma$, respectively. These accuracies are comparable to those that can be reached in the measurement of the atmospheric neutrino oscillation parameters $\\Delta m^2_{31}$ and $\\sin^2\\theta_{23}$ in long-baseline superbeam experiments.

  14. Elastic Incoherent Neutron Scattering, operating by varying instrumental energy resolution, Principles, Simulations and Experiments of the Resolution Elastic Neutron

    E-Print Network [OSTI]

    Doster, Wolfgang

    Elastic Incoherent Neutron Scattering, operating by varying instrumental energy resolution, Principles, Simulations and Experiments of the Resolution Elastic Neutron Scattering (RENS) by Magazu a different name "RENS" (resolution dependent elastic neutron scattering) [1-5]. Our ERS papers, first

  15. Background Study on nu_e Appearance from a nu_mu Beam in Very Long Baseline Neutrino Oscillation Experiments with a Large Water Cherenkov Detector

    E-Print Network [OSTI]

    Chiaki Yanagisawa; Chang Kee Jung; Trung Le; Brett Viren

    2011-02-23

    There is a growing interest in very long baseline neutrino oscillation experimentation using accelerator produced neutrino beam as a machinery to probe the last three unmeasured neutrino oscillation parameters: the mixing angle theta_13, the possible CP violating phase delta_CP and the mass hierarchy, namely, the sign of delta-m^2_32. Water Cherenkov detectors such as IMB, Kamiokande and Super-Kamiokande have shown to be very successful at detecting neutrino interactions. Scaling up this technology may continue to provide the required performance for the next generation of experiments. This report presents the latest effort to demonstrate that a next generation (> 100 kton) water Cherenkov detector can be used effectively for the rather difficult task of detecting nu_e events from the neutrino oscillation nu_mu -> nu_e despite the large expected potential background resulting from pi^0 events produced via neutral current interactions.

  16. LBNO-DEMO: Large-scale neutrino detector demonstrators for phased performance assessment in view of a long-baseline oscillation experiment

    E-Print Network [OSTI]

    L. Agostino; B. Andrieu; R. Asfandiyarov; D. Autiero; O. Bésida; F. Bay; R. Bayes; A. M. Blebea-Apostu; A. Blondel; M. Bogomilov; S. Bolognesi; S. Bordoni; A. Bravar; M. Buizza-Avanzini; F. Cadoux; D. Caiulo; M. Calin; M. Campanelli; C. Cantini; L. Chaussard; D. Chesneanu; N. Colino; P. Crivelli; I. De Bonis; Y. Déclais; J. Dawson; C. De La Taille; P. Del Amo Sanchez; A. Delbart; S. Di Luise; D. Duchesneau; F. Dulucq; J. Dumarchez; I. Efthymiopoulos; S. Emery; T. Enqvist; L. Epprecht; T. Esanu; D. Franco; D. Franco; M. Friend; V. Galymov; A. Gendotti; C. Giganti; I. Gil-Botella; M. C Gomoiu; P. Gorodetzky; A. Haesler; T. Hasegawa; S. Horikawa; M. Ieva; A. Jipa; Y. Karadzhov; I. Karpikov; A. Khotjantsev; A. Korzenev; D. Kryn; Y. Kudenko; P. Kuusiniemi; I. Lazanu; J. -M. Levy; K. Loo; T. Lux; J. Maalampi; R. M. Margineanu; J. Marteau; C. Martin; G. Martin-Chassard; E. Mazzucato; A. Mefodiev; O. Mineev; B. Mitrica; S. Murphy; T. Nakadaira; M. Nessi; K. Nikolics; L. Nita; E. Noah; P. Novella; G. A. Nuijten; T. Ovsiannikova; C. Palomares; T. Patzak; E. Pennacchio; L. Periale; H. Pessard; B. Popov; M. Ravonel; M. Rayner; C. Regenfus; C. Ristea; O. Ristea; A. Robert; A. Rubbia; K. Sakashita; F. Sanchez; R. Santorelli; E. Scantamburlo; F. Sergiampietri; D. Sgalaberna; M. Slupecki; F. J. P. Soler; D. L. Stanca; A. Tonazzo; W. H. Trzaska; R. Tsenov; G. Vankova-Kirilova; F. Vannucci; G. Vasseur; A. Verdugo; T. Viant; S. Wu; N. Yershov; L. Zambelli; M. Zito

    2014-09-14

    In June 2012, an Expression of Interest for a long-baseline experiment (LBNO) has been submitted to the CERN SPSC. LBNO considers three types of neutrino detector technologies: a double-phase liquid argon (LAr) TPC and a magnetised iron detector as far detectors. For the near detector, a high-pressure gas TPC embedded in a calorimeter and a magnet is the baseline design. A mandatory milestone is a concrete prototyping effort towards the envisioned large-scale detectors, and an accompanying campaign of measurements aimed at assessing the detector associated systematic errors. The proposed $6\\times 6\\times 6$m$^3$ DLAr is an industrial prototype of the design discussed in the EoI and scalable to 20 kton or 50~kton. It is to be constructed and operated in a controlled laboratory and surface environment with test beam access, such as the CERN North Area (NA). Its successful operation and full characterisation will be a fundamental milestone, likely opening the path to an underground deployment of larger detectors. The response of the DLAr demonstrator will be measured and understood with an unprecedented precision in a charged particle test beam (0.5-20 GeV/c). The exposure will certify the assumptions and calibrate the response of the detector, and allow to develop and to benchmark sophisticated reconstruction algorithms, such as those of 3-dimensional tracking, particle ID and energy flow in liquid argon. All these steps are fundamental for validating the correctness of the physics performance described in the LBNO EoI.

  17. Regional Energy Baseline 

    E-Print Network [OSTI]

    Kim, H.; Baltazar, J.C.; Haberl, J.

    2011-01-01

    -09-02 REGIONAL ENERGY BASELINE (1960 ~ 2009) 0 100 200 300 400 500 600 700 800 1960 1965 1970 1975 1980 1985 1990 1995 2000 2005 To tal En erg y U se pe r C ap ita (M MB tu) Year Total Energy Use per Capita (1960-2009) US... SEEC 12-States TX Hyojin Kim Juan-Carlos Baltazar, Ph.D. Jeff S. Haberl, Ph.D., P.E. September 2011 ENERGY SYSTEMS LABORATORY Texas Engineering Experiment Station Texas A&M University System 1960-2009 Regional Energy...

  18. Development and Mass Production of a Mixture of LAB- and DIN-based Gadolinium-loaded Liquid Scintillator for the NEOS Short-baseline Neutrino Experiment

    E-Print Network [OSTI]

    Ba Ro Kim; Boyoung Han; Eun-ju Jeon; Kyung Kwang Joo; H. J. Kim; Hyunsoo Kim; Jinyu Kim; Yeongduk Kim; Youngju Ko; Jaison Lee; Jooyoung Lee; Moohyun Lee; Kyungju Ma; Yoomin Oh; Hyangkyu Park; Kang-soon Park; Kyungmin Seo; Gwang-Min Seon; Kim Siyeon

    2015-11-16

    A new experiment, which is called as NEOS (NEutrino Oscillation at Short baseline), is proposed on the site of Hanbit reactors at Yonggwang, South Korea, to investigate a reactor antineutrino anomaly. A homogeneous NEOS detector having a 1000-L target volume has been constructed and deployed at the tendon gallery ~25 m away from the reactor core. A linear alkylbenzene (LAB) is used as a main base solvent of the NEOS detector. Furthermore, a di-isopropylnaphthalene (DIN) is added to improve the light output and pulse shape discrimination (PSD) ability. The ratio of LAB to DIN is 90:10. PPO (3 g/L) and bis-MSB (30 mg/L) are dissolved to formulate the mixture of LAB- and DIN-based liquid scintillator (LS). Then, ~0.5% gadolinium (Gd) is loaded into the LS by using the solvent-solvent extraction technique. In this paper, we report the characteristics of Gd-loaded LS (GdLS) for the NEOS detector and the handling during mass production.

  19. REMORA 3: The first instrumented fuel experiment with on-line gas composition measurement by acoustic sensor

    SciTech Connect (OSTI)

    Lambert, T.; Muller, E.; Federici, E.; Rosenkrantz, E.; Ferrandis, J. Y.; Tiratay, X.; Silva, V.; Machard, D.; Trillon, G.

    2011-07-01

    With the aim to improve the knowledge of nuclear fuel behaviour, the development of advanced instrumentation used during in-pile experiments in Material Testing Reactor (MTR) is necessary. To obtain data on high Burn-Up MOX fuel performance under transient operating conditions, especially in order to differentiate between the kinetics of fission gas and helium releases and to acquire data on the degradation of the fuel conductivity, a highly instrumented in-pile experiment called REMORA 3 has been conducted by CEA and IES (Southern Electronic Inst. - CNRS - Montpellier 2 Univ.). A rodlet extracted from a fuel rod base irradiated for five cycles in a French EDF commercial PWR has been re-instrumented with a fuel centerline thermocouple, a pressure transducer and an advanced acoustic sensor. This latter, patented by CEA and IES, is 1 used in addition to pressure measurement to determine the composition of the gases located in the free volume and the molar fractions of fission gas and helium. This instrumented fuel rodlet has been re-irradiated in a specific rig, GRIFFONOS, located in the periphery of the OSIRIS experimental reactor core at CEA Saclay. First of all, an important design stage and test phases have been performed before the irradiation in order to optimize the response and the accuracy of the sensors: - To control the influence of the temperature on the acoustic sensor behaviour, a thermal mock-up has been built. - To determine the temperature of the gas located in the acoustic cavity as a function of the coolant temperature, and the average temperature of the gases located in the rodlet free volume as a function of the linear heat rate, thermal calculations have been achieved. The former temperature is necessary to calculate the molar fractions of the gases and the latter is used to calculate the total amount of released gas from the internal rod pressure measurements. - At the end of the instrumented rod manufacturing, specific internal free volume and pressure measurements have been carried out. Preliminary calculations of the REMORA 3 experiments have been performed from these measurements, with the aim to determine free volume evolution as a function of linear heat rate history. - A tracer gas has been added to the filling gas in order to optimize the accuracy of the helium balance at the time of the post irradiation examination. The two phases of the REMORA 3 irradiation have been achieved at the end of 2010 in the OSIRIS reactor. Slight acoustic signal degradation, observed during the test under high neutron and gamma flux, has led to an efficiency optimization of the signal processing. The instrumentation ran smoothly and allowed to reach all the experimental objectives. After non destructive examination performed in the Osiris reactor pool, typically gamma spectrometry and neutron radiography, the instrumented rod and the device have been disassembled. Then the instrumented rod has been transported to the LECA facility in Cadarache Centre for post irradiation examination. The internal pressure and volume of the rodlet as well as precise gas composition measurements will be known after puncturing step performed in a hot cell of this facility. That will allow us to qualify the in-pile measurements and to finalize the data which will be used for the validation of the fuel behaviour computer codes. (authors)

  20. Differential Die-Away Instrument: Report on Initial Simulations of Spent Fuel Experiment

    SciTech Connect (OSTI)

    Goodsell, Alison V.; Henzl, Vladimir; Swinhoe, Martyn T.

    2014-04-01

    New Monte Carlo simulations of the differential die-away (DDA) instrument response to the assay of spent and fresh fuel helped to redefine the signal-to-Background ratio and the effects of source neutron tailoring on the system performance. Previously, burst neutrons from the neutron generator together with all neutrons from a fission chain started by a fast fission of 238U were considered to contribute to active background counts. However, through additional simulations, the magnitude of the 238U first fission contribution was found to not affect the DDA performance in reconstructing 239Pueff. As a result, the newly adopted DDA active background definition considers now any neutrons within a branch of the fission chain that does not include at least one fission event induced by a thermal neutron, before being detected, to be the active background. The active background, consisting thus of neutrons from a fission chain or its individual branches composed entirely of sequence of fast fissions on any fissile or fissionable nuclei, is not expected to change significantly with different fuel assemblies. Additionally, while source tailoring materials surrounding the neutron generator were found to influence and possibly improve the instrument performance, the effect was not substantial.

  1. Instrument validation project

    SciTech Connect (OSTI)

    Reynolds, B.A.; Daymo, E.A.; Geeting, J.G.H.; Zhang, J.

    1996-06-01

    Westinghouse Hanford Company Project W-211 is responsible for providing the system capabilities to remove radioactive waste from ten double-shell tanks used to store radioactive wastes on the Hanford Site in Richland, Washington. The project is also responsible for measuring tank waste slurry properties prior to injection into pipeline systems, including the Replacement of Cross-Site Transfer System. This report summarizes studies of the appropriateness of the instrumentation specified for use in Project W-211. The instruments were evaluated in a test loop with simulated slurries that covered the range of properties specified in the functional design criteria. The results of the study indicate that the compact nature of the baseline Project W-211 loop does not result in reduced instrumental accuracy resulting from poor flow profile development. Of the baseline instrumentation, the Micromotion densimeter, the Moore Industries thermocouple, the Fischer and Porter magnetic flow meter, and the Red Valve Pressure transducer meet the desired instrumental accuracy. An alternate magnetic flow meter (Yokagawa) gave nearly identical results as the baseline fischer and Porter. The Micromotion flow meter did not meet the desired instrument accuracy but could potentially be calibrated so that it would meet the criteria. The Nametre on-line viscometer did not meet the desired instrumental accuracy and is not recommended as a quantitative instrument although it does provide qualitative information. The recommended minimum set of instrumentation necessary to ensure the slurry meets the Project W-058 acceptance criteria is the Micromotion mass flow meter and delta pressure cells.

  2. The MICE Muon Beam on ISIS and the beam-line instrumentation of the Muon Ionization Cooling Experiment

    E-Print Network [OSTI]

    MICE Collaboration

    2012-03-23

    The international Muon Ionization Cooling Experiment (MICE), which is under construction at the Rutherford Appleton Laboratory (RAL), will demonstrate the principle of ionization cooling as a technique for the reduction of the phase-space volume occupied by a muon beam. Ionization cooling channels are required for the Neutrino Factory and the Muon Collider. MICE will evaluate in detail the performance of a single lattice cell of the Feasibility Study 2 cooling channel. The MICE Muon Beam has been constructed at the ISIS synchrotron at RAL, and in MICE Step I, it has been characterized using the MICE beam-instrumentation system. In this paper, the MICE Muon Beam and beam-line instrumentation are described. The muon rate is presented as a function of the beam loss generated by the MICE target dipping into the ISIS proton beam. For a 1 V signal from the ISIS beam-loss monitors downstream of our target we obtain a 30 KHz instantaneous muon rate, with a neglible pion contamination in the beam.

  3. The MICE Muon Beam on ISIS and the beam-line instrumentation of the Muon Ionization Cooling Experiment

    SciTech Connect (OSTI)

    Bogomilov, M.; et al.

    2012-05-01

    The international Muon Ionization Cooling Experiment (MICE), which is under construction at the Rutherford Appleton Laboratory (RAL), will demonstrate the principle of ionization cooling as a technique for the reduction of the phase-space volume occupied by a muon beam. Ionization cooling channels are required for the Neutrino Factory and the Muon Collider. MICE will evaluate in detail the performance of a single lattice cell of the Feasibility Study 2 cooling channel. The MICE Muon Beam has been constructed at the ISIS synchrotron at RAL, and in MICE Step I, it has been characterized using the MICE beam-instrumentation system. In this paper, the MICE Muon Beam and beam-line instrumentation are described. The muon rate is presented as a function of the beam loss generated by the MICE target dipping into the ISIS proton beam. For a 1 V signal from the ISIS beam-loss monitors downstream of our target we obtain a 30 KHz instantaneous muon rate, with a neglible pion contamination in the beam.

  4. EA-1943: Long Baseline Neutrino Facility/Deep Underground Neutrino...

    Broader source: Energy.gov (indexed) [DOE]

    May 27, 2015 EA-1943: Draft Environmental Assessment Long Baseline Neutrino FacilityDeep Underground Neutrino Experiment (LBNFDUNE) at Fermilab, Batavia, Illinois and the...

  5. Transportation Baseline Report

    SciTech Connect (OSTI)

    Fawcett, Ricky Lee; Kramer, George Leroy Jr.

    1999-12-01

    The National Transportation Program 1999 Transportation Baseline Report presents data that form a baseline to enable analysis and planning for future Department of Energy (DOE) Environmental Management (EM) waste and materials transportation. In addition, this Report provides a summary overview of DOE’s projected quantities of waste and materials for transportation. Data presented in this report were gathered as a part of the IPABS Spring 1999 update of the EM Corporate Database and are current as of July 30, 1999. These data were input and compiled using the Analysis and Visualization System (AVS) which is used to update all stream-level components of the EM Corporate Database, as well as TSD System and programmatic risk (disposition barrier) information. Project (PBS) and site-level IPABS data are being collected through the Interim Data Management System (IDMS). The data are presented in appendices to this report.

  6. Airborne measurements of total sulfur gases during NASA global tropospheric experiment/chemical instrumentation test and evaluation 3

    SciTech Connect (OSTI)

    Farwell, S.O.; MacTaggart, D.L.; Chatham, W.H.

    1995-04-20

    A metal foil collection/flash desorption/flame photometric detection (MFC/FD/FPD) technique was used by investigators from the University of Idaho (UI) to measure ambient total sulfur gas concentrations from an aircraft platform during the NASA Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation 3 (GTE/CITE 3) program. The MFC/FD/FPD technique allowed rapid quantitation of tropospheric background air masses using sample integration times of 1-3 min with little or no gap between measurements. The rapid and continual sampling nature of this technique yielded data covering approximately 75% of the entire CITE 3 program`s air track. Ambient air measurement data obtained during northern hemisphere (NH) flights often exhibited relatively high total sulfur gas values (up to 19 ppb) and an extremely high degree of sample heterogeneity, especially in coastal locations. Data from southern hemisphere (SH) flights typically exhibited relatively low total sulfur gas concentrations and a low degree of sample heterogeneity. A bimodal interhemispheric total sulfur gas gradient was observed using data obtained during transit flights between the two CITE 3 program ground bases. Comparisons were made of UI total sulfur gas measurements with composite sulfur gas values generated using speciated sulfur gas measurements from other CITE 3 participants. Only a relatively small number of overlap periods for comparison were obtained from all the available CITE 3 data because of large differences in measurement integration times and lack of synchronization of sample start/stop times for the various investigators. These effects were compounded with extreme sample heterogeneity in the NH and the speed at which the aircraft traversed the air masses being sampled. Comparison of NH UI total with composite sulfur gas values showed excellent correlation and linear curve fit, indicating substantial qualitative agreement. 20 refs., 10 figs., 7 tabs.

  7. Baseline Control Measures.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Individual Permit Baseline Control Measures at Los Alamos National Laboratory, Poster, Individual Permit for Storm Water, NPDES Permit No. NM0030759 Author(s): Veenis, Steven J....

  8. Sterile Neutrino Fits to Short-Baseline Neutrino Oscillation Measurements

    E-Print Network [OSTI]

    Conrad, Janet

    2013-01-01

    This paper reviews short-baseline oscillation experiments as interpreted within the context of one, two, and three sterile neutrino models associated with additional neutrino mass states in the ~1?eV range. Appearance and ...

  9. Technical Evaluation Report "Baseline Design for the COS Aperture Plate"

    E-Print Network [OSTI]

    Colorado at Boulder, University of

    Technical Evaluation Report "Baseline Design for the COS Aperture Plate" Date: October 14, 1999 Document Number: COS-11-0009 Revision: Initial Release Contract No.: NAS5-98043 CDRL No.: SE-05 Prepared By: J. Morse, COS Project Scientist, CU/CASA Date Reviewed By: E. Wilkinson, COS Instrument Scientist

  10. New baseline for the magnet cooling system Yury Ivanyushenkov

    E-Print Network [OSTI]

    McDonald, Kirk

    1 New baseline for the magnet cooling system Yury Ivanyushenkov Engineering and Instrumentation Department, Rutherford Appleton Laboratory #12;2 Liquid nitrogen cooling system: Conceptual points · Magnet the magnet as a stand alone system. #12;3 Liquid nitrogen cooling system: Diagram Drawn by Peter Titus #12

  11. International Atomic Energy Agency specialists meeting on experience in ageing, maintenance, and modernization of instrumentation and control systems for improving nuclear power plant availability

    SciTech Connect (OSTI)

    Not Available

    1993-10-01

    This report presents the proceedings of the Specialist`s Meeting on Experience in Aging, Maintenance and Modernization of Instrumentation and Control Systems for Improving Nuclear Power Plant Availability that was held at the Ramada Inn in Rockville, Maryland on May 5--7, 1993. The Meeting was presented in cooperation with the Electric Power Research Institute, Oak Ridge National Laboratory and the International Atomic Energy Agency. There were approximately 65 participants from 13 countries at the Meeting. Individual reports have been cataloged separately.

  12. Baseline Graphite Characterization: First Billet

    SciTech Connect (OSTI)

    Mark C. Carroll; Joe Lords; David Rohrbaugh

    2010-09-01

    The Next Generation Nuclear Plant Project Graphite Research and Development program is currently establishing the safe operating envelope of graphite core components for a very high temperature reactor design. To meet this goal, the program is generating the extensive amount of quantitative data necessary for predicting the behavior and operating performance of the available nuclear graphite grades. In order determine the in-service behavior of the graphite for the latest proposed designs, two main programs are underway. The first, the Advanced Graphite Creep (AGC) program, is a set of experiments that are designed to evaluate the irradiated properties and behavior of nuclear grade graphite over a large spectrum of temperatures, neutron fluences, and compressive loads. Despite the aggressive experimental matrix that comprises the set of AGC test runs, a limited amount of data can be generated based upon the availability of space within the Advanced Test Reactor and the geometric constraints placed on the AGC specimens that will be inserted. In order to supplement the AGC data set, the Baseline Graphite Characterization program will endeavor to provide supplemental data that will characterize the inherent property variability in nuclear-grade graphite without the testing constraints of the AGC program. This variability in properties is a natural artifact of graphite due to the geologic raw materials that are utilized in its production. This variability will be quantified not only within a single billet of as-produced graphite, but also from billets within a single lot, billets from different lots of the same grade, and across different billets of the numerous grades of nuclear graphite that are presently available. The thorough understanding of this variability will provide added detail to the irradiated property data, and provide a more thorough understanding of the behavior of graphite that will be used in reactor design and licensing. This report covers the development of the Baseline Graphite Characterization program from a testing and data collection standpoint through the completion of characterization on the first billet of nuclear-grade graphite. This data set is the starting point for all future evaluations and comparisons of material properties.

  13. Compendium of NASA Data Base for the Global Tropospheric Experiment`s Chemical Instrumentation Test and Evaluation No. 3 (CITE-3)

    SciTech Connect (OSTI)

    Gregory, G.L.; Scott, A.D. Jr.

    1996-03-01

    This compendium describes aircraft data that are available from NASA`s Chemical Instrumentation Test and Evaluation - 3 (CITE-3) conducted over the north and tropical Atlantic Ocean during August/September 1989. CITE-3 objectives were to intercompare instrumentation for aircraft measurements of SO2, DMS (dimethyl sulfide), COS (carbonyl sulfide), C2S, and H2S and to determine for the marine environment, the abundance and distribution of these sulfur species. Sampling was conducted aboard the NASA Wallops Electra aircraft in ambient air over the North Atlantic Ocean east of Wallops Island, Virginia, and the tropical Atlantic east of Natal, Brazil. Intercomparison measurements included 5 techniques for SO2; 6 for DMS; and 3 each for COS, CS2, and H2S. Ancillary data important to ozone photochemistry and sulfur partitioning chemistry were also measured. This document provides a representation of NASA Electra data that are available from NASA Langley`s Distributed Active Archive Center (DAAC). The DAAC data bases include other data such as meteorological data/products, results from surface studies, satellite observations, and data from sonde releases.

  14. 324 Building Baseline Radiological Characterization

    SciTech Connect (OSTI)

    R.J. Reeder, J.C. Cooper

    2010-06-24

    This report documents the analysis of radiological data collected as part of the characterization study performed in 1998. The study was performed to create a baseline of the radiological conditions in the 324 Building.

  15. Exertion instruments

    E-Print Network [OSTI]

    Vawter, Noah (Noah Theodore)

    2011-01-01

    This dissertation describes the research, development and reasoning behind a family of musical instruments called Exertion Instruments. They use inline electrical generators to run a synthesizer and an amplifier while ...

  16. Precision Measurements of Long-Baseline Neutrino Oscillation at LBNF

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Worcester, Elizabeth

    2015-08-06

    In a long-baseline neutrino oscillation experiment, the primary physics objectives are to determine the neutrino mass hierarchy, to determine the octant of the neutrino mixing angle ?23, to search for CP violation in neutrino oscillation, and to precisely measure the size of any CP-violating effect that is discovered. This presentation provides a brief introduction to these measurements and reports on efforts to optimize the design of a long-baseline neutrino oscillation experiment, the status of LBNE, and the transition to an international collaboration at LBNF.

  17. Baseline LAW Glass Formulation Testing

    SciTech Connect (OSTI)

    Kruger, Albert A. [USDOE Office of River Protection, Richland, WA (United States); Mooers, Cavin [The Catholic University of America, Washington, DC (United States). Vitreous State Lab.; Bazemore, Gina [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Pegg, Ian L. [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Hight, Kenneth [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Lai, Shan Tao [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Buechele, Andrew [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Rielley, Elizabeth [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Gan, Hao [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Muller, Isabelle S. [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Cecil, Richard [The Catholic University of America, Washington, DC (United States). Vitreous State Lab

    2013-06-13

    The major objective of the baseline glass formulation work was to develop and select glass formulations that are compliant with contractual and processing requirements for each of the LAW waste streams. Other objectives of the work included preparation and characterization of glasses with respect to the properties of interest, optimization of sulfate loading in the glasses, evaluation of ability to achieve waste loading limits, testing to demonstrate compatibility of glass melts with melter materials of construction, development of glass formulations to support ILAW qualification activities, and identification of glass formulation issues with respect to contract specifications and processing requirements.

  18. Baseline Test Specimen Machining Report

    SciTech Connect (OSTI)

    mark Carroll

    2009-08-01

    The Next Generation Nuclear Plant (NGNP) Project is tasked with selecting a high temperature gas reactor technology that will be capable of generating electricity and supplying large amounts of process heat. The NGNP is presently being designed as a helium-cooled high temperature gas reactor (HTGR) with a large graphite core. The graphite baseline characterization project is conducting the research and development (R&D) activities deemed necessary to fully qualify nuclear-grade graphite for use in the NGNP reactor. Establishing nonirradiated thermomechanical and thermophysical properties by characterizing lot-to-lot and billet-to-billet variations (for probabilistic baseline data needs) through extensive data collection and statistical analysis is one of the major fundamental objectives of the project. The reactor core will be made up of stacks of graphite moderator blocks. In order to gain a more comprehensive understanding of the varying characteristics in a wide range of suitable graphites, any of which can be classified as “nuclear grade,” an experimental program has been initiated to develop an extensive database of the baseline characteristics of numerous candidate graphites. Various factors known to affect the properties of graphite will be investigated, including specimen size, spatial location within a graphite billet, specimen orientation within a billet (either parallel to [P] or transverse to [T] the long axis of the as-produced billet), and billet-to-billet variations within a lot or across different production lots. Because each data point is based on a certain position within a given billet of graphite, particular attention must be paid to the traceability of each specimen and its spatial location and orientation within each billet. The evaluation of these properties is discussed in the Graphite Technology Development Plan (Windes et. al, 2007). One of the key components in the evaluation of these graphite types will be mechanical testing on specimens drawn from carefully controlled sections of each billet. To this end, this report will discuss the machining of the first set of test specimens that will be evaluated in this program through tensile, compressive, and flexural testing. Validation that the test specimens have been produced to the tolerances required by the applicable ASTM standards, and to the quality control levels required by this program, will demonstrate the viability of sending graphite to selected suppliers that will provide valuable and certifiable data to future data sets that are integral to the NGNP program and beyond.

  19. TWRS privatization process technical baseline

    SciTech Connect (OSTI)

    Orme, R.M.

    1996-09-13

    The U.S. Department of Energy (DOE) is planning a two-phased program for the remediation of Hanford tank waste. Phase 1 is a pilot program to demonstrate the procurement of treatment services. The volume of waste treated during the Phase 1 is a small percentage of the tank waste. During Phase 2, DOE intends to procure treatment services for the balance of the waste. The TWRS Privatization Process Technical Baseline (PPTB) provides a summary level flowsheet/mass balance of tank waste treatment operations which is consistent with the tank inventory information, waste feed staging studies, and privatization guidelines currently available. The PPTB will be revised periodically as privatized processing concepts are crystallized.

  20. Pinellas Plant Environmental Baseline Report

    SciTech Connect (OSTI)

    Not Available

    1997-06-01

    The Pinellas Plant has been part of the Department of Energy`s (DOE) nuclear weapons complex since the plant opened in 1957. In March 1995, the DOE sold the Pinellas Plant to the Pinellas County Industry Council (PCIC). DOE has leased back a large portion of the plant site to facilitate transition to alternate use and safe shutdown. The current mission is to achieve a safe transition of the facility from defense production and prepare the site for alternative uses as a community resource for economic development. Toward that effort, the Pinellas Plant Environmental Baseline Report (EBR) discusses the current and past environmental conditions of the plant site. Information for the EBR is obtained from plant records. Historical process and chemical usage information for each area is reviewed during area characterizations.

  1. ARM - Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrn DocumentationgovInstrumentstracegasgovInstrumentsxsacrInstruments Related Links

  2. Energy Intensity Baselining and Tracking Guidance

    Broader source: Energy.gov (indexed) [DOE]

    betterbuildings.energy.gov Energy Intensity Baselining and Tracking Guidance i Preface The U.S. Department of Energy's (DOE's) Better Buildings, Better Plants Program (Better...

  3. UCSF Sustainability Baseline Assessment: Carbon Footprint Analysis

    E-Print Network [OSTI]

    Yamamoto, Keith

    UCSF Sustainability Baseline Assessment: Carbon Footprint Analysis Final Issue Date: March 21, 2010 #12;Carbon Footprint Analysis Background This chapter of the Sustainability Assessment focuses on UCSF

  4. ARM - Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach HomeA Better Anode DesigngovCampaignsSpring Single ColumngovCampaignsWintergovInstrumentsAirborne

  5. ARM - Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory of rare Kaonforsupernovae2GatheringARMHistory and Status ofgovInstruments

  6. Instrument subjects without Instrument role Elisabetta Jezek

    E-Print Network [OSTI]

    Instrument subjects without Instrument role Elisabetta Jezek Universit`a di Pavia jezek examine a problem- atic semantic role, the Instrument role, which presents differences in definition roles. We propose that inanimate nouns denoting instruments in subject positions are not instantiations

  7. SciTech Connect: "long baseline neutrino experiment"

    Office of Scientific and Technical Information (OSTI)

    of Chief Financial Officer (CR) (United States) USDOE Office of Civilian Radioactive Waste Management (RW) (United States) USDOE Office of Counterintelligence (United States)...

  8. Available instrumentation: Instrument Model/features Analysis

    E-Print Network [OSTI]

    Eberhard, Marc O.

    Available instrumentation: Instrument Model/features Analysis ICP-MS Perkin Elmer ELAN-DRCe with optional front-end Perkin Elmer series 200 HPLC. Available DRC gases include NH3 and O2. Virtually any element, notably metals. The instrument is equipped with a dedicated HPLC that allows differentiation

  9. Mexico - Greenhouse Gas Emissions Baselines and Reduction Potentials...

    Open Energy Info (EERE)

    Mexico - Greenhouse Gas Emissions Baselines and Reduction Potentials from Buildings Jump to: navigation, search Name Mexico - Greenhouse Gas Emissions Baselines and Reduction...

  10. South Africa - Greenhouse Gas Emission Baselines and Reduction...

    Open Energy Info (EERE)

    South Africa - Greenhouse Gas Emission Baselines and Reduction Potentials from Buildings Jump to: navigation, search Name South Africa - Greenhouse Gas Emission Baselines and...

  11. Low activated incore instrument

    DOE Patents [OSTI]

    Ekeroth, Douglas E. (Delmont, PA)

    1994-01-01

    Instrumentation for nuclear reactor head-mounted incore instrumentation systems fabricated of low nuclear cross section materials (i.e., zirconium or titanium). The instrumentation emits less radiation than that fabricated of conventional materials.

  12. Low activated incore instrument

    DOE Patents [OSTI]

    Ekeroth, D.E.

    1994-04-19

    Instrumentation is described for nuclear reactor head-mounted incore instrumentation systems fabricated of low nuclear cross section materials (i.e., zirconium or titanium). The instrumentation emits less radiation than that fabricated of conventional materials. 9 figures.

  13. Waste management project technical baseline description

    SciTech Connect (OSTI)

    Sederburg, J.P.

    1997-08-13

    A systems engineering approach has been taken to describe the technical baseline under which the Waste Management Project is currently operating. The document contains a mission analysis, function analysis, requirement analysis, interface definitions, alternative analysis, system definition, documentation requirements, implementation definitions, and discussion of uncertainties facing the Project.

  14. Instrumentation of a light twin aircraft for flow energizer flight tests 

    E-Print Network [OSTI]

    Binford, Robert Susumu

    1986-01-01

    16, Strain Indicator and Switching Box Installed in Aircraft. . . 36 17. Computer Display and Keyboard Installed in Aircraft. . IB, Computer Floppy Disk Drives Installed in Aircraft. . . . 19. Instrumentation Package ? Block Diagram... A). a = 6. 8 and CI551 5 Configurations 65 35. Cp Comparisons ofsBaseline (Row 8). a = 6. 8 and C1551 5 Configurations 36 Co Comparisons of Baseline (Row C). a = 6. 8 and C1551. 5 Configurations 67 37 Cp Comparisons of Baseline (Row 0). a = 6...

  15. Career Map: Instrumentation Coordinator

    Broader source: Energy.gov [DOE]

    The Wind Program's Career Map provides job description information for Instrumentation Coordinator positions.

  16. The QUIET Instrument

    SciTech Connect (OSTI)

    Bischoff, C.; et al.

    2012-07-01

    The Q/U Imaging ExperimenT (QUIET) is designed to measure polarization in the Cosmic Microwave Background, targeting the imprint of inflationary gravitational waves at large angular scales ({approx}1{sup o}). Between 2008 October and 2010 December, two independent receiver arrays were deployed sequentially on a 1.4m side-fed Dragonian telescope. The polarimeters which form the focal planes use a highly compact design based on High Electron Mobility Transistors (HEMTs) that provides simultaneous measurements of the Stokes parameters Q, U, and I in a single module. The 17-element Q-band polarimeter array, with a central frequency of 43.1 GHz, has the best sensitivity (69 {mu}Ks{sup 1/2}) and the lowest instrumental systematic errors ever achieved in this band, contributing to the tensor-to-scalar ratio at r < 0:1. The 84-element W-band polarimeter array has a sensitivity of 87 {mu}Ks{sup 1/2} at a central frequency of 94.5 GHz. It has the lowest systematic errors to date, contributing at r < 0:01. The two arrays together cover multipoles in the range {ell} {approx} 25 -- 975. These are the largest HEMT-based arrays deployed to date. This article describes the design, calibration, performance of, and sources of systematic error for the instrument.

  17. Baseline Microstructural Characterization of Outer 3013 Containers

    SciTech Connect (OSTI)

    Zapp, Phillip E.; Dunn, Kerry A

    2005-07-31

    Three DOE Standard 3013 outer storage containers were examined to characterize the microstructure of the type 316L stainless steel material of construction. Two of the containers were closure-welded yielding production-quality outer 3013 containers; the third examined container was not closed. Optical metallography and Knoop microhardness measurements were performed to establish a baseline characterization that will support future destructive examinations of 3013 outer containers in the storage inventory. Metallography revealed the microstructural features typical of this austenitic stainless steel as it is formed and welded. The grains were equiaxed with evident annealing twins. Flow lines were prominent in the forming directions of the cylindrical body and flat lids and bottom caps. No adverse indications were seen. Microhardness values, although widely varying, were consistent with annealed austenitic stainless steel. The data gathered as part of this characterization will be used as a baseline for the destructive examination of 3013 containers removed from the storage inventory.

  18. Kids with disabilities inspire a musical instrument

    ScienceCinema (OSTI)

    Daily, Dan; Pfeifer, Kent

    2014-02-10

    The Midiwing is a musical instrument that unites music and computer technology for those who lack the experience, physical ability, or maturity to play music with traditional instruments. To create the instrument, Dan Daily, Director of Musicode Innovations, reworked and recoded Musical Instrument Digital Interface (MIDI) technology and introduced ergonomic design. He applied to the New Mexico Small Business Assistance (NMSBA) Program to receive help when he discovered the microcontroller he used was being phased out. Daily and Kent Pfeifer, an engineer at Sandia National Laboratories and musician himself, partnered to create a new state-of-the-art design.

  19. Kids with disabilities inspire a musical instrument

    SciTech Connect (OSTI)

    Daily, Dan; Pfeifer, Kent

    2013-11-21

    The Midiwing is a musical instrument that unites music and computer technology for those who lack the experience, physical ability, or maturity to play music with traditional instruments. To create the instrument, Dan Daily, Director of Musicode Innovations, reworked and recoded Musical Instrument Digital Interface (MIDI) technology and introduced ergonomic design. He applied to the New Mexico Small Business Assistance (NMSBA) Program to receive help when he discovered the microcontroller he used was being phased out. Daily and Kent Pfeifer, an engineer at Sandia National Laboratories and musician himself, partnered to create a new state-of-the-art design.

  20. SRP Baseline Hydrogeologic Investigation, Phase 3

    SciTech Connect (OSTI)

    Bledsoe, H.W.

    1988-08-01

    The SRP Baseline Hydrogeologic Investigation was implemented for the purpose of updating and improving the knowledge and understanding of the hydrogeologic systems underlying the SRP site. Phase III, which is discussed in this report, includes the drilling of 7 deep coreholes (sites P-24 through P-30) and the installation of 53 observation wells ranging in depth from approximately 50 ft to more than 970 ft below the ground surface. In addition to the collection of geologic cores for lithologic and stratigraphic study, samples were also collected for the determination of physical characteristics of the sediments and for the identification of microorganisms.

  1. SRP baseline hydrogeologic investigation, Phase 2

    SciTech Connect (OSTI)

    Bledsoe, H.W.

    1987-11-01

    As discussed in the program plan for the Savannah River Plant (SRP) Baseline Hydrogeologic Investigation, this program has been implemented for the purpose of updating and improving the current state of knowledge and understanding of the hydrogeologic systems underlying the Savannah River Plant (SRP). The objective of the program is to install a series of observation well clusters (wells installed in each major water bearing formation at the same site) at key locations across the plant site in order to: (1) provide detailed information on the lithology, stratigraphy, and groundwater hydrology, (2) provide observation wells to monitor the groundwater quality, head relationships, gradients, and flow paths.

  2. Elec 331 -Surgical Instruments Surgical Instruments

    E-Print Network [OSTI]

    Pulfrey, David L.

    331 - Surgical Instruments 5 Annealing (Softening) · After quenching · Heat steel ­ Above Austenite arranged in a lattice · Ferrite ­ Steel · Iron Alloy ­ Fe + Other atoms ­ At least 50% Fe · Stainless steel ­ 11% to 30% Cr ­ Up to 2% C #12;Elec

  3. Long Baseline Interferometry of Be Stars

    E-Print Network [OSTI]

    Olivier Chesneau; Thomas Rivinius

    2005-10-24

    We give an introduction to interferometrical concepts and their applicability to Be stars. The first part of the paper concentrates on a short historic overview and basic principles of two-beam interferometric observations. In the second part, the VLTI/MIDI instrument is introduced and its first results on Be stars, obtained on alpha Ara and delta Cen, are outlined.

  4. California Baseline Energy Demands to 2050 for Advanced Energy Pathways

    E-Print Network [OSTI]

    McCarthy, Ryan; Yang, Christopher; Ogden, Joan M.

    2008-01-01

    diesel). The baseline scenario is based upon the output of the CalCars model with the middle fuel price

  5. US Biofuels Baseline and impact of extending the

    E-Print Network [OSTI]

    Noble, James S.

    June 2011 US Biofuels Baseline and impact of extending the $0.45 ethanol blenders baseline projections for agricultural and biofuel markets.1 That baseline assumed current biofuel policy for cellulosic biofuels was assumed to expire at the end of 2012. This report compares a slightly modified

  6. Examining Uncertainty in Demand Response Baseline Models and

    E-Print Network [OSTI]

    LBNL-5096E Examining Uncertainty in Demand Response Baseline Models and Variability in Automated of California. #12;Examining Uncertainty in Demand Response Baseline Models and Variability in Automated.e. dynamic prices). Using a regression-based baseline model, we define several Demand Response (DR

  7. Portable controls experiments

    E-Print Network [OSTI]

    Larson, Richard Winston

    2012-01-01

    Experiments for controls classes like MIT's 2.004 require large lab setups and expensive equipment such as oscilloscopes and function generators. We developed a series of controls experiments based on National Instruments' ...

  8. Global Nuclear Energy Partnership Waste Treatment Baseline

    SciTech Connect (OSTI)

    Dirk Gombert; William Ebert; James Marra; Robert Jubin; John Vienna

    2008-05-01

    The Global Nuclear Energy Partnership program (GNEP) is designed to demonstrate a proliferation-resistant and sustainable integrated nuclear fuel cycle that can be commercialized and used internationally. Alternative stabilization concepts for byproducts and waste streams generated by fuel recycling processes were evaluated and a baseline of waste forms was recommended for the safe disposition of waste streams. Waste forms are recommended based on the demonstrated or expected commercial practicability and technical maturity of the processes needed to make the waste forms, and performance of the waste form materials when disposed. Significant issues remain in developing technologies to process some of the wastes into the recommended waste forms, and a detailed analysis of technology readiness and availability may lead to the choice of a different waste form than what is recommended herein. Evolving regulations could also affect the selection of waste forms.

  9. Instrumentation for Nuclear Applications

    SciTech Connect (OSTI)

    NONE

    1998-09-18

    The objective of this project was to develop and coordinate nuclear instrumentation standards with resulting economies for the nuclear and radiation fields. There was particular emphasis on coordination and management of the Nuclear Instrument Module (NIM) System, U.S. activity involving the CAMAC international standard dataway system, the FASTBUS modular high-speed data acquisition and control system and processing and management of national nuclear instrumentation and detector standards, as well as a modest amount of assistance and consultation services to the Pollutant Characterization and Safety Research Division of the Office of Health and Environmental Research. The principal accomplishments were the development and maintenance of the NIM instrumentation system that is the predominant instrumentation system in the nuclear and radiation fields worldwide, the CAMAC digital interface system in coordination with the ESONE Committee of European Laboratories, the FASTBUS high-speed system and numerous national and international nuclear instrumentation standards.

  10. NREL Solar Radiation Research Laboratory (SRRL): Baseline Measurement System (BMS); Golden, Colorado (Data)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Stoffel, T.; Andreas, A.

    1981-07-15

    The SRRL was established at the Solar Energy Research Institute (now NREL) in 1981 to provide continuous measurements of the solar resources, outdoor calibrations of pyranometers and pyrheliometers, and to characterize commercially available instrumentation. The SRRL is an outdoor laboratory located on South Table Mountain, a mesa providing excellent solar access throughout the year, overlooking Denver. Beginning with the basic measurements of global horizontal irradiance, direct normal irradiance and diffuse horizontal irradiance at 5-minute intervals, the SRRL Baseline Measurement System now produces more than 130 data elements at 1-min intervals that are available from the Measurement & Instrumentation Data Center Web site. Data sources include global horizontal, direct normal, diffuse horizontal (from shadowband and tracking disk), global on tilted surfaces, reflected solar irradiance, ultraviolet, infrared (upwelling and downwelling), photometric and spectral radiometers, sky imagery, and surface meteorological conditions (temperature, relative humidity, barometric pressure, precipitation, snow cover, wind speed and direction at multiple levels). Data quality control and assessment include daily instrument maintenance (M-F) with automated data quality control based on real-time examinations of redundant instrumentation and internal consistency checks using NREL's SERI-QC methodology. Operators are notified of equipment problems by automatic e-mail messages generated by the data acquisition and processing system. Radiometers are recalibrated at least annually with reference instruments traceable to the World Radiometric Reference (WRR).

  11. NREL Solar Radiation Research Laboratory (SRRL): Baseline Measurement System (BMS); Golden, Colorado (Data)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Stoffel, T.; Andreas, A.

    The SRRL was established at the Solar Energy Research Institute (now NREL) in 1981 to provide continuous measurements of the solar resources, outdoor calibrations of pyranometers and pyrheliometers, and to characterize commercially available instrumentation. The SRRL is an outdoor laboratory located on South Table Mountain, a mesa providing excellent solar access throughout the year, overlooking Denver. Beginning with the basic measurements of global horizontal irradiance, direct normal irradiance and diffuse horizontal irradiance at 5-minute intervals, the SRRL Baseline Measurement System now produces more than 130 data elements at 1-min intervals that are available from the Measurement & Instrumentation Data Center Web site. Data sources include global horizontal, direct normal, diffuse horizontal (from shadowband and tracking disk), global on tilted surfaces, reflected solar irradiance, ultraviolet, infrared (upwelling and downwelling), photometric and spectral radiometers, sky imagery, and surface meteorological conditions (temperature, relative humidity, barometric pressure, precipitation, snow cover, wind speed and direction at multiple levels). Data quality control and assessment include daily instrument maintenance (M-F) with automated data quality control based on real-time examinations of redundant instrumentation and internal consistency checks using NREL's SERI-QC methodology. Operators are notified of equipment problems by automatic e-mail messages generated by the data acquisition and processing system. Radiometers are recalibrated at least annually with reference instruments traceable to the World Radiometric Reference (WRR).

  12. Improved PHIP Instrumentation

    E-Print Network [OSTI]

    Agraz, Jose

    2013-01-01

    Neural Plast, 2012. Technical report, [FMY12] Shaun Frost,Product Catalog. ” Technical report, Honeywell, 2012. [Sen- sors. ” Technical report, Texas Instruments, 2000. [

  13. LTC vacuum blasting machine (concrete): Baseline report

    SciTech Connect (OSTI)

    1997-07-31

    The LTC shot blast technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC 1073 Vacuum Blasting Machine uses a high-capacity, direct-pressure blasting system which incorporates a continuous feed for the blast media. The blast media cleans the surface within the contained brush area of the blast. It incorporates a vacuum system which removes dust and debris from the surface as it is blasted. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure during maintenance activities was minimal, but due to mechanical difficulties dust monitoring could not be conducted during operation. Noise exposure was significant. Further testing for each of these exposures is recommended because of the outdoor environment where the testing demonstration took place. This may cause the results to be inaccurate. It is feasible that the dust and noise levels will be higher in an enclosed environment. In addition, other safety and health issues found were ergonomics, heat stress, tripping hazards, electrical hazards, lockout/tagout, and arm-hand vibration.

  14. LTC vacuum blasting machine (metal): Baseline report

    SciTech Connect (OSTI)

    1997-07-31

    The LTC coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC coating removal system consisted of several hand tools, a Roto Peen scaler, and a needlegun. They are designed to remove coatings from steel, concrete, brick, and wood. These hand tools are used with the LTC PTC-6 vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. The dust exposure was minimal but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body vibration, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

  15. Pentek metal coating removal system: Baseline report

    SciTech Connect (OSTI)

    1997-07-31

    The Pentek coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The Pentek coating removal system consisted of the ROTO-PEEN Scaler, CORNER-CUTTER{reg_sign}, and VAC-PAC{reg_sign}. They are designed to remove coatings from steel, concrete, brick, and wood. The Scaler uses 3M Roto Peen tungsten carbide cutters while the CORNER-CUTTER{reg_sign} uses solid needles for descaling activities. These hand tools are used with the VAC-PAC{reg_sign} vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure minimal, but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

  16. Gated integrator with signal baseline subtraction

    DOE Patents [OSTI]

    Wang, X.

    1996-12-17

    An ultrafast, high precision gated integrator includes an opamp having differential inputs. A signal to be integrated is applied to one of the differential inputs through a first input network, and a signal indicative of the DC offset component of the signal to be integrated is applied to the other of the differential inputs through a second input network. A pair of electronic switches in the first and second input networks define an integrating period when they are closed. The first and second input networks are substantially symmetrically constructed of matched components so that error components introduced by the electronic switches appear symmetrically in both input circuits and, hence, are nullified by the common mode rejection of the integrating opamp. The signal indicative of the DC offset component is provided by a sample and hold circuit actuated as the integrating period begins. The symmetrical configuration of the integrating circuit improves accuracy and speed by balancing out common mode errors, by permitting the use of high speed switching elements and high speed opamps and by permitting the use of a small integrating time constant. The sample and hold circuit substantially eliminates the error caused by the input signal baseline offset during a single integrating window. 5 figs.

  17. Gated integrator with signal baseline subtraction

    DOE Patents [OSTI]

    Wang, Xucheng (Lisle, IL)

    1996-01-01

    An ultrafast, high precision gated integrator includes an opamp having differential inputs. A signal to be integrated is applied to one of the differential inputs through a first input network, and a signal indicative of the DC offset component of the signal to be integrated is applied to the other of the differential inputs through a second input network. A pair of electronic switches in the first and second input networks define an integrating period when they are closed. The first and second input networks are substantially symmetrically constructed of matched components so that error components introduced by the electronic switches appear symmetrically in both input circuits and, hence, are nullified by the common mode rejection of the integrating opamp. The signal indicative of the DC offset component is provided by a sample and hold circuit actuated as the integrating period begins. The symmetrical configuration of the integrating circuit improves accuracy and speed by balancing out common mode errors, by permitting the use of high speed switching elements and high speed opamps and by permitting the use of a small integrating time constant. The sample and hold circuit substantially eliminates the error caused by the input signal baseline offset during a single integrating window.

  18. SRS baseline hydrogeologic investigation: Summary report

    SciTech Connect (OSTI)

    Bledsoe, H.W.; Aadland, R.K. (Westinghouse Savannah River Co., Aiken, SC (United States)); Sargent, K.A. (Furman Univ., Greenville, SC (United States). Dept. of Geology)

    1990-11-01

    Work on the Savannah River Site (SRS) Baseline Hydrogeologic Investigation began in 1983 when it was determined that the knowledge of the plant hydrogeologic systems needed to be expanded and improved in response to changing stratigraphic and hydrostratigraphic terminology and increased involvement by regulatory agencies (Bledsoe, 1984). Additionally, site-wide data were needed to determine flow paths, gradients, and velocities associated with the different aquifers underlying the plant site. The program was divided into three phases in order to allow the results of one phase to be evaluated and necessary changes and improvements incorporated into the following phases. This report summarizes the results of all three phases and includes modified graphic logs, lithologic descriptions of the different geologic formations, profiles of each cluster site, hydrostratigraphic cross sections, hydrographs of selected wells within each cluster for the first full year of uninterrupted water level measurements, potentiometric maps developed from data collected from all clusters, completion diagrams for each well, and a summary of laboratory tests. Additionally, the proposed new classification of hydrostratigraphic units at SRS (Aadland and Bledsoe, 1990) has been incorporated.

  19. U.S. Department of Energy Performance Baseline Guide

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-09-12

    The guide supports DOE O 413.3A and identifies key performance baseline development processes and practices. Does not cancel other directives.

  20. EA-1943: Long Baseline Neutrino Facility/Deep Underground Neutrino...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DUNE) at Fermilab, Batavia, Illinois and the Sanford Underground Research Facility, Lead, South Dakota EA-1943: Long Baseline Neutrino FacilityDeep Underground Neutrino...

  1. Updates to the International Linear Collider Damping Rings Baseline...

    Office of Scientific and Technical Information (OSTI)

    Updates to the International Linear Collider Damping Rings Baseline Design Citation Details In-Document Search Title: Updates to the International Linear Collider Damping Rings...

  2. Cost and Performance Comparison Baseline for Fossil Energy Power...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    blocks together into a new, revolutionary concept for future coal-based power and energy production. Objective To establish baseline performance and cost estimates for today's...

  3. UNFCCC-Consolidated baseline and monitoring methodology for landfill...

    Open Energy Info (EERE)

    inventory Resource Type: Guidemanual Website: cdm.unfccc.intpublicinputsmethacm0001index.html Cost: Free Language: English References: UNFCCC-Consolidated baseline and...

  4. Estimation and Analysis of Life Cycle Costs of Baseline Enhanced...

    Open Energy Info (EERE)

    Estimation and Analysis of Life Cycle Costs of Baseline Enhanced Geothermal Systems Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title...

  5. California Baseline Energy Demands to 2050 for Advanced Energy Pathways

    E-Print Network [OSTI]

    McCarthy, Ryan; Yang, Christopher; Ogden, Joan M.

    2008-01-01

    CEC (2005b) Energy demand forecast methods report.growth in California energy demands forecast in the baseline2006-2016: Staff energy demand forecast (Revised September

  6. Seismic baseline and induction studies- Roosevelt Hot Springs...

    Open Energy Info (EERE)

    Seismic baseline and induction studies- Roosevelt Hot Springs, Utah and Raft River, Idaho Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Seismic...

  7. ITP Distributed Energy: 2008 Combined Heat and Power Baseline...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2008 Combined Heat and Power Baseline Assessment and Action Plan for the Nevada Market Final Project Report September 30, 2008 Prepared By: Pacific Region Combined Heat and...

  8. The LBNO long-baseline oscillation sensitivities with two conventional neutrino beams at different baselines

    E-Print Network [OSTI]

    LAGUNA-LBNO Collaboration; :; S. K. Agarwalla; L. Agostino; M. Aittola; A. Alekou; B. Andrieu; F. Antoniou; R. Asfandiyarov; D. Autiero; O. Bésida; A. Balik; P. Ballett; I. Bandac; D. Banerjee; W. Bartmann; F. Bay; B. Biskup; A. M. Blebea-Apostu; A. Blondel; M. Bogomilov; S. Bolognesi; E. Borriello; I. Brancus; A. Bravar; M. Buizza-Avanzini; D. Caiulo; M. Calin; M. Calviani; M. Campanelli; C. Cantini; G. Cata-Danil; S. Chakraborty; N. Charitonidis; L. Chaussard; D. Chesneanu; F. Chipesiu; P. Crivelli; J. Dawson; I. De Bonis; Y. Declais; P. Del Amo Sanchez; A. Delbart; S. Di Luise; D. Duchesneau; J. Dumarchez; I. Efthymiopoulos; A. Eliseev; S. Emery; T. Enqvist; K. Enqvist; L. Epprecht; A. N. Erykalov; T. Esanu; D. Franco; M. Friend; V. Galymov; G. Gavrilov; A. Gendotti; C. Giganti; S. Gilardoni; B. Goddard; C. M. Gomoiu; Y. A. Gornushkin; P. Gorodetzky; A. Haesler; T. Hasegawa; S. Horikawa; K. Huitu; A. Izmaylov; A. Jipa; K. Kainulainen; Y. Karadzhov; M. Khabibullin; A. Khotjantsev; A. N. Kopylov; A. Korzenev; S. Kosyanenko; D. Kryn; Y. Kudenko; P. Kuusiniemi; I. Lazanu; C. Lazaridis; J. -M. Levy; K. Loo; J. Maalampi; R. M. Margineanu; J. Marteau; C. Martin-Mari; V. Matveev; E. Mazzucato; A. Mefodiev; O. Mineev; A. Mirizzi; B. Mitrica; S. Murphy; T. Nakadaira; S. Narita; D. A. Nesterenko; K. Nguyen; K. Nikolics; E. Noah; Yu. Novikov; A. Oprima; J. Osborne; T. Ovsyannikova; Y. Papaphilippou; S. Pascoli; T. Patzak; M. Pectu; E. Pennacchio; L. Periale; H. Pessard; B. Popov; M. Ravonel; M. Rayner; F. Resnati; O. Ristea; A. Robert; A. Rubbia; K. Rummukainen; A. Saftoiu; K. Sakashita; F. Sanchez-Galan; J. Sarkamo; N. Saviano; E. Scantamburlo; F. Sergiampietri; D. Sgalaberna; E. Shaposhnikova; M. Slupecki; D. Smargianaki; D. Stanca; R. Steerenberg; A. R. Sterian; P. Sterian; S. Stoica; C. Strabel; J. Suhonen; V. Suvorov; G. Toma; A. Tonazzo; W. H. Trzaska; R. Tsenov; K. Tuominen; M. Valram; G. Vankova-Kirilova; F. Vannucci; G. Vasseur; F. Velotti; P. Velten; V. Venturi; T. Viant; S. Vihonen; H. Vincke; A. Vorobyev; A. Weber; S. Wu; N. Yershov; L. Zambelli; M. Zito

    2014-12-02

    The proposed Long Baseline Neutrino Observatory (LBNO) initially consists of $\\sim 20$ kton liquid double phase TPC complemented by a magnetised iron calorimeter, to be installed at the Pyh\\"asalmi mine, at a distance of 2300 km from CERN. The conventional neutrino beam is produced by 400 GeV protons accelerated at the SPS accelerator delivering 700 kW of power. The long baseline provides a unique opportunity to study neutrino flavour oscillations over their 1st and 2nd oscillation maxima exploring the $L/E$ behaviour, and distinguishing effects arising from $\\delta_{CP}$ and matter. In this paper we show how this comprehensive physics case can be further enhanced and complemented if a neutrino beam produced at the Protvino IHEP accelerator complex, at a distance of 1160 km, and with modest power of 450 kW is aimed towards the same far detectors. We show that the coupling of two independent sub-MW conventional neutrino and antineutrino beams at different baselines from CERN and Protvino will allow to measure CP violation in the leptonic sector at a confidence level of at least $3\\sigma$ for 50\\% of the true values of $\\delta_{CP}$ with a 20 kton detector. With a far detector of 70 kton, the combination allows a $3\\sigma$ sensitivity for 75\\% of the true values of $\\delta_{CP}$ after 10 years of running. Running two independent neutrino beams, each at a power below 1 MW, is more within today's state of the art than the long-term operation of a new single high-energy multi-MW facility, which has several technical challenges and will likely require a learning curve.

  9. Spent Nuclear Fuel Project technical baseline document. Fiscal year 1995: Volume 1, Baseline description

    SciTech Connect (OSTI)

    Womack, J.C. [Westinghouse Hanford Co., Richland, WA (United States); Cramond, R. [TRW (United States); Paedon, R.J. [SAIC (United States)] [and others

    1995-03-13

    This document is a revision to WHC-SD-SNF-SD-002, and is issued to support the individual projects that make up the Spent Nuclear Fuel Project in the lower-tier functions, requirements, interfaces, and technical baseline items. It presents results of engineering analyses since Sept. 1994. The mission of the SNFP on the Hanford site is to provide safety, economic, environmentally sound management of Hanford SNF in a manner that stages it to final disposition. This particularly involves K Basin fuel, although other SNF is involved also.

  10. ARM - Instrument - mplcmask

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cape Cod MA; AMF 1 retired TMP M1 Browse Data U. of Helsinki Research Station (SMEAR II), Hyytiala, Finland; AMF2 retired Originating instrument has been retired at this location...

  11. Baseline zone estimation in two Atul Mallik

    E-Print Network [OSTI]

    Banerjee, Moulinath

    being the region of interest. In LIDAR (light detection and ranging) experiments used for measuring concentration of pollu- tants in the atmosphere, interest often centers on finding high/low pollution zones (see, for example, Wakimoto and McElroy (1986)); in such contexts, S0 would be the zone of minimal pollution

  12. A comparison of baseline aerodynamic performance of optimally-twisted versus non-twisted HAWT blades

    SciTech Connect (OSTI)

    Simms, D.A.; Robinson, M.C.; Hand, M.M.; Fingersh, L.J.

    1995-01-01

    NREL has completed the initial twisted blade field tests of the ``Unsteady Aerodynamics Experiment.`` This test series continues systematic measurements of unsteady aerodynamic phenomena prevalent in stall-controlled horizontal axis wind turbines (HAWTs). The blade twist distribution optimizes power production at a single angle of attack along the span. Abrupt transitions into and out of stall are created due to rapid changes in inflow. Data from earlier experiments have been analyzed extensively to characterize the steady and unsteady response of untwisted blades. In this report, a characterization and comparison of the baseline aerodynamic performance of the twisted versus non-twisted blade sets will be presented for steady flow conditions.

  13. Instrumentation in medical systems

    SciTech Connect (OSTI)

    Chu, W.T. [Lawrence Berkeley Lab., CA (United States). Accelerator and Fusion Research Div.

    1995-05-01

    The demand for clinical use of accelerated heavy charged-particle (proton and light-ion) beams for cancer treatment is now burgeoning worldwide. Clinical trials are underway at more than a dozen accelerators. Several hospital-based accelerator facilities dedicated to radiation treatment of human cancer have been constructed, and their number is growing. Many instruments in medical systems have been developed for modifying extracted particle beams for clinical application, monitoring the delivery of the treatment beams, and controlling the treatment processes to ensure patient safety. These in turn demand new developments of instruments in controlling beam extraction, beam tuning, and beam transportation at the medical systems.

  14. The Detector System of The Daya Bay Reactor Antineutrino Experiment

    E-Print Network [OSTI]

    F. P. An; J. Z. Bai; A. B. Balantekin; H. R. Band; D. Beavis; W. Beriguete; M. Bishai; S. Blyth; R. L. Brown; I. Butorov; D. Cao; G. F. Cao; J. Cao; R. Carr; W. R. Cen; W. T. Chan; Y. L. Chan; J. F. Chang; L. C. Chang; Y. Chang; C. Chasman; H. Y. Chen; H. S. Chen; M. J. Chen; Q. Y. Chen; S. J. Chen; S. M. Chen; X. C. Chen; X. H. Chen; X. S. Chen; Y. X. Chen; Y. Chen; J. H. Cheng; J. Cheng; Y. P. Cheng; J. J. Cherwinka; S. Chidzik; K. Chow; M. C. Chu; J. P. Cummings; J. de Arcos; Z. Y. Deng; X. F. Ding; Y. Y. Ding; M. V. Diwan; L. Dong; J. Dove; E. Draeger; X. F. Du; D. A. Dwyer; W. R. Edwards; S. R. Ely; S. D. Fang; J. Y. Fu; Z. W. Fu; L. Q. Ge; V. Ghazikhanian; R. Gill; J. Goett; M. Gonchar; G. H. Gong; H. Gong; Y. A. Gornushkin; M. Grassi; L. S. Greenler; W. Q. Gu; M. Y. Guan; R. P. Guo; X. H. Guo; R. W. Hackenburg; R. L. Hahn; R. Han; S. Hans; M. He; Q. He; W. S. He; K. M. Heeger; Y. K. Heng; A. Higuera; P. Hinrichs; T. H. Ho; M. Hoff; Y. K. Hor; Y. B. Hsiung; B. Z. Hu; L. M. Hu; L. J. Hu; T. Hu; W. Hu; E. C. Huang; H. Z. Huang; H. X. Huang; P. W. Huang; X. Huang; X. T. Huang; P. Huber; G. Hussain; Z. Isvan; D. E. Jaffe; P. Jaffke; K. L. Jen; S. Jetter; X. P. Ji; X. L. Ji; H. J. Jiang; W. Q. Jiang; J. B. Jiao; R. A. Johnson; J. Joseph; L. Kang; S. H. Kettell; S. Kohn; M. Kramer; K. K. Kwan; M. W. Kwok; T. Kwok; C. Y. Lai; W. C. Lai; W. H. Lai; T. J. Langford; K. Lau; L. Lebanowski; J. Lee; M. K. P. Lee; R. T. Lei; R. Leitner; J. K. C. Leung; K. Y. Leung; C. A. Lewis; B. Li; C. Li; D. J. Li; F. Li; G. S. Li; J. Li; N. Y. Li; Q. J. Li; S. F. Li; S. C. Li; W. D. Li; X. B. Li; X. N. Li; X. Q. Li; Y. Li; Y. F. Li; Z. B. Li; H. Liang; J. Liang; C. J. Lin; G. L. Lin; P. Y. Lin; S. X. Lin; S. K. Lin; Y. C. Lin; J. J. Ling; J. M. Link; L. Littenberg; B. R. Littlejohn; B. J. Liu; C. Liu; D. W. Liu; H. Liu; J. L. Liu; J. C. Liu; S. Liu; S. S. Liu; X. Liu; Y. B. Liu; C. Lu; H. Q. Lu; J. S. Lu; A. Luk; K. B. Luk; T. Luo; X. L. Luo; L. H. Ma; Q. M. Ma; X. Y. Ma; X. B. Ma; Y. Q. Ma; B. Mayes; K. T. McDonald; M. C. McFarlane; R. D. McKeown; Y. Meng; I. Mitchell; D. Mohapatra; J. Monari Kebwaro; J. E. Morgan; Y. Nakajima; J. Napolitano; D. Naumov; E. Naumova; C. Newsom; H. Y. Ngai; W. K. Ngai; Y. B. Nie; Z. Ning; J. P. Ochoa-Ricoux; A. Olshevskiy; A. Pagac; H. -R. Pan; S. Patton; C. Pearson; V. Pec; J. C. Peng; L. E. Piilonen; L. Pinsky; C. S. J. Pun; F. Z. Qi; M. Qi; X. Qian; N. Raper; B. Ren; J. Ren; R. Rosero; B. Roskovec; X. C. Ruan; W. R. Sands III; B. Seilhan; B. B. Shao; K. Shih; W. Y. Song; H. Steiner; P. Stoler; M. Stuart; G. X. Sun; J. L. Sun; N. Tagg; Y. H. Tam; H. K. Tanaka; W. Tang; X. Tang; D. Taychenachev; H. Themann; Y. Torun; S. Trentalange; O. Tsai; K. V. Tsang; R. H. M. Tsang; C. E. Tull; Y. C. Tung; N. Viaux; B. Viren; S. Virostek; V. Vorobel; C. H. Wang; L. S. Wang; L. Y. Wang; L. Z. Wang; M. Wang; N. Y. Wang; R. G. Wang; T. Wang; W. Wang; W. W. Wang; X. T. Wang; X. Wang; Y. F. Wang; Z. Wang; Z. Wang; Z. M. Wang; D. M. Webber; H. Y. Wei; Y. D. Wei; L. J. Wen; D. L. Wenman; K. Whisnant; C. G. White; L. Whitehead; C. A. Whitten Jr.; J. Wilhelmi; T. Wise; H. C. Wong; H. L. H. Wong; J. Wong; S. C. F. Wong; E. Worcester; F. F. Wu; Q. Wu; D. M. Xia; J. K. Xia; S. T. Xiang; Q. Xiao; Z. Z. Xing; G. Xu; J. Y. Xu; J. L. Xu; J. Xu; W. Xu; Y. Xu; T. Xue; J. Yan; C. G. Yang; L. Yang; M. S. Yang; M. T. Yang; M. Ye; M. Yeh; Y. S. Yeh; K. Yip; B. L. Young; G. Y. Yu; Z. Y. Yu; S. Zeng; L. Zhan; C. Zhang; F. H. Zhang; H. H. Zhang; J. W. Zhang; K. Zhang; Q. X. Zhang; Q. M. Zhang; S. H. Zhang; X. T. Zhang; Y. C. Zhang; Y. H. Zhang; Y. M. Zhang; Y. X. Zhang; Y. M. Zhang; Z. J. Zhang; Z. Y. Zhang; Z. P. Zhang; J. Zhao; Q. W. Zhao; Y. F. Zhao; Y. B. Zhao; L. Zheng; W. L. Zhong; L. Zhou; N. Zhou; Z. Y. Zhou; H. L. Zhuang; S. Zimmerman; J. H. Zou

    2015-08-17

    The Daya Bay experiment was the first to report simultaneous measurements of reactor antineutrinos at multiple baselines leading to the discovery of $\\bar{\

  15. The Detector System of The Daya Bay Reactor Antineutrino Experiment

    E-Print Network [OSTI]

    An, F P; Balantekin, A B; Band, H R; Beavis, D; Beriguete, W; Bishai, M; Blyth, S; Brown, R L; Butorov, I; Cao, D; Cao, G F; Cao, J; Carr, R; Cen, W R; Chan, W T; Chan, Y L; Chang, J F; Chang, L C; Chang, Y; Chasman, C; Chen, H Y; Chen, H S; Chen, M J; Chen, Q Y; Chen, S J; Chen, S M; Chen, X C; Chen, X H; Chen, X S; Chen, Y X; Chen, Y; Cheng, J H; Cheng, J; Cheng, Y P; Cherwinka, J J; Chidzik, S; Chow, K; Chu, M C; Cummings, J P; de Arcos, J; Deng, Z Y; Ding, X F; Ding, Y Y; Diwan, M V; Dong, L; Dove, J; Draeger, E; Du, X F; Dwyer, D A; Edwards, W R; Ely, S R; Fang, S D; Fu, J Y; Fu, Z W; Ge, L Q; Ghazikhanian, V; Gill, R; Goett, J; Gonchar, M; Gong, G H; Gong, H; Gornushkin, Y A; Grassi, M; Greenler, L S; Gu, W Q; Guan, M Y; Guo, R P; Guo, X H; Hackenburg, R W; Hahn, R L; Han, R; Hans, S; He, M; He, Q; He, W S; Heeger, K M; Heng, Y K; Higuera, A; Hinrichs, P; Ho, T H; Hoff, M; Hor, Y K; Hsiung, Y B; Hu, B Z; Hu, L M; Hu, L J; Hu, T; Hu, W; Huang, E C; Huang, H Z; Huang, H X; Huang, P W; Huang, X; Huang, X T; Huber, P; Hussain, G; Isvan, Z; Jaffe, D E; Jaffke, P; Jen, K L; Jetter, S; Ji, X P; Ji, X L; Jiang, H J; Jiang, W Q; Jiao, J B; Johnson, R A; Joseph, J; Kang, L; Kettell, S H; Kohn, S; Kramer, M; Kwan, K K; Kwok, M W; Kwok, T; Lai, C Y; Lai, W C; Lai, W H; Langford, T J; Lau, K; Lebanowski, L; Lee, J; Lee, M K P; Lei, R T; Leitner, R; Leung, J K C; Leung, K Y; Lewis, C A; Li, B; Li, C; Li, D J; Li, F; Li, G S; Li, J; Li, N Y; Li, Q J; Li, S F; Li, S C; Li, W D; Li, X B; Li, X N; Li, X Q; Li, Y; Li, Y F; Li, Z B; Liang, H; Liang, J; Lin, C J; Lin, G L; Lin, P Y; Lin, S X; Lin, S K; Lin, Y C; Ling, J J; Link, J M; Littenberg, L; Littlejohn, B R; Liu, B J; Liu, C; Liu, D W; Liu, H; Liu, J L; Liu, J C; Liu, S; Liu, S S; Liu, X; Liu, Y B; Lu, C; Lu, H Q; Lu, J S; Luk, A; Luk, K B; Luo, T; Luo, X L; Ma, L H; Ma, Q M; Ma, X Y; Ma, X B; Ma, Y Q; Mayes, B; McDonald, K T; McFarlane, M C; McKeown, R D; Meng, Y; Mitchell, I; Mohapatra, D; Kebwaro, J Monari; Morgan, J E; Nakajima, Y; Napolitano, J; Naumov, D; Naumova, E; Newsom, C; Ngai, H Y; Ngai, W K; Nie, Y B; Ning, Z; Ochoa-Ricoux, J P; Olshevskiy, A; Pagac, A; Pan, H -R; Patton, S; Pearson, C; Pec, V; Peng, J C; Piilonen, L E; Pinsky, L; Pun, C S J; Qi, F Z; Qi, M; Qian, X; Raper, N; Ren, B; Ren, J; Rosero, R; Roskovec, B; Ruan, X C; Sands, W R; Seilhan, B; Shao, B B; Shih, K; Song, W Y; Steiner, H; Stoler, P; Stuart, M; Sun, G X; Sun, J L; Tagg, N; Tam, Y H; Tanaka, H K; Tang, W; Tang, X; Taychenachev, D; Themann, H; Torun, Y; Trentalange, S; Tsai, O; Tsang, K V; Tsang, R H M; Tull, C E; Tung, Y C; Viaux, N; Viren, B; Virostek, S; Vorobel, V; Wang, C H; Wang, L S; Wang, L Y; Wang, L Z; Wang, M; Wang, N Y; Wang, R G; Wang, T; Wang, W; Wang, W W; Wang, X T; Wang, X; Wang, Y F; Wang, Z; Wang, Z M; Webber, D M; Wei, H Y; Wei, Y D; Wen, L J; Wenman, D L; Whisnant, K; White, C G; Whitehead, L; Whitten, C A; Wilhelmi, J; Wise, T; Wong, H C; Wong, H L H; Wong, J; Wong, S C F; Worcester, E; Wu, F F; Wu, Q; Xia, D M; Xia, J K; Xiang, S T; Xiao, Q; Xing, Z Z; Xu, G; Xu, J Y; Xu, J L; Xu, J; Xu, W; Xu, Y; Xue, T; Yan, J; Yang, C G; Yang, L; Yang, M S; Yang, M T; Ye, M; Yeh, M; Yeh, Y S; Yip, K; Young, B L; Yu, G Y; Yu, Z Y; Zeng, S; Zhan, L; Zhang, C; Zhang, F H; Zhang, H H; Zhang, J W; Zhang, K; Zhang, Q X; Zhang, Q M; Zhang, S H; Zhang, X T; Zhang, Y C; Zhang, Y H; Zhang, Y M; Zhang, Y X; Zhang, Z J; Zhang, Z Y; Zhang, Z P; Zhao, J; Zhao, Q W; Zhao, Y F; Zhao, Y B; Zheng, L; Zhong, W L; Zhou, L; Zhou, N; Zhou, Z Y; Zhuang, H L; Zimmerman, S; Zou, J H

    2015-01-01

    The Daya Bay experiment was the first to report simultaneous measurements of reactor antineutrinos at multiple baselines leading to the discovery of $\\bar{\

  16. Status of Baseline Sampling for Elements in Soil and Vegetation...

    Open Energy Info (EERE)

    Status of Baseline Sampling for Elements in Soil and Vegetation at Four Kgra's in the Imperial Valley, California Jump to: navigation, search OpenEI Reference LibraryAdd to library...

  17. Cost and Performance Baseline for Fossil Energy Plants Volume...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    www.netl.doe.gov This page intentionally left blank Cost and Performance Baseline for Coal-to-SNG and Ammonia (Volume 2) i Table of Contents LIST OF EXHIBITS......

  18. HARDWARE AND INSTRUMENTATION -

    E-Print Network [OSTI]

    HARDWARE AND INSTRUMENTATION - Note Noise Amplification in Parallel Whole-Head Ultra-Low- Field. Ilmoniemi2 In ultra-low-field magnetic resonance imaging, arrays of up to hundreds of highly sensitive by the precessing magnetization. Here, we investigate the noise amplification in sensitivity-encoded ultra- low

  19. Atmosphere Sciences Instrumentation Lab

    E-Print Network [OSTI]

    Delene, David J.

    Water Probe Robert Mitchell Challenge: · Power varies with Temperature, Pressure, Airspeed, and Others Balance Cycle · Down Points - Frost/Dew Temperature #12;Pressure Transducer David Keith · Pressure sensing · Funnel helps prevent evaporation inside instrument · Each tip creates a 100ms switch closure · Closure

  20. Behavior Research Methods Instrumentation 1983, 15 (6), 569-573

    E-Print Network [OSTI]

    Menzel, Randolf - Institut für Biologie

    Behavior Research Methods Instrumentation 1983, 15 (6), 569-573 Automated behavioral experiments on the software and computer technology is available from the senior author, whose mailing address is: Freie

  1. Using Virtual Instrumentation to Develop a Modern Biomedical

    E-Print Network [OSTI]

    Using Virtual Instrumentation to Develop a Modern Biomedical Engineering Laboratory* J. B. OLANSEN describes the development of a variety of classical biomedical experiments, particularly for use depicted are intended to introduce students to fundamental concepts of biomedical experimentation, from

  2. Pulse energy measurement at the SXR instrument

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Moeller, Stefan; Brown, Garth; Dakovski, Georgi; Hill, Bruce; Holmes, Michael; Loos, Jennifer; Maida, Ricardo; Paiser, Ernesto; Schlotter, William; Turner, Joshua J.; et al

    2015-04-14

    A gas monitor detector was implemented and characterized at the Soft X-ray Research (SXR) instrument to measure the average, absolute and pulse-resolved photon flux of the LCLS beam in the energy range between 280 and 2000 eV. The detector is placed after the monochromator and addresses the need to provide reliable absolute pulse energy as well as pulse-resolved measurements for the various experiments at this instrument. This detector provides a reliable non-invasive measurement for determining flux levels on the samples in the downstream experimental chamber and for optimizing signal levels of secondary detectors and for the essential need of datamore »normalization. The design, integration into the instrument and operation are described, and examples of its performance are given.« less

  3. Data acquisition instruments: Psychopharmacology

    SciTech Connect (OSTI)

    Hartley, D.S. III

    1998-01-01

    This report contains the results of a Direct Assistance Project performed by Lockheed Martin Energy Systems, Inc., for Dr. K. O. Jobson. The purpose of the project was to perform preliminary analysis of the data acquisition instruments used in the field of psychiatry, with the goal of identifying commonalities of data and strategies for handling and using the data in the most advantageous fashion. Data acquisition instruments from 12 sources were provided by Dr. Jobson. Several commonalities were identified and a potentially useful data strategy is reported here. Analysis of the information collected for utility in performing diagnoses is recommended. In addition, further work is recommended to refine the commonalities into a directly useful computer systems structure.

  4. Instrumentation and diagnostics

    SciTech Connect (OSTI)

    Nakaishi, C.V.; Bedick, R.C.

    1990-12-01

    This Technology Status Report describes research and accomplishments for the Instrumentation and Diagnostics (I D) Projects within the Advanced Research and Technology Development (AR TD) Program of the United States Department of Energy (DOE) Office of Fossil Energy (FE). Process understanding and control can be improved through the development of advanced instrumentation and diagnostics. The thrust of the I D Projects is to further develop existing measurement and control techniques for application to advanced coal-based technologies. Project highlights are: an inductively coupled plasma (ICP) instrument has been developed to analyze trace elements in gasification and combustion process streams. An in situ two-color Mie scattering technique with LSS can simultaneously measure the size, velocity, and elemental composition of coal particles during combustion. A high-temperature, fluorescence thermometry technique has accurately measured gas temperatures during field testing in combustion and gasification environments. Expert systems have been developed to improve the control of advanced coal-based processes. Capacitance flowmeters were developed to determine the mass flowrate, solid volume fraction, and particle velocities of coal slurries. 32 refs., 9 figs.

  5. Response to 'Comment on 'Elastic incoherent neutron scattering operating by varying instrumental energy resolution: Principle, simulations, and experiments of the resolution elastic neutron scattering (RENS)'' [Rev. Sci. Instrum. 83, 107101 (2012)

    SciTech Connect (OSTI)

    Magazu, Salvatore; Migliardo, Federica; Benedetto, Antonio [Dipartimento di Fisica, Universita di Messina, C.da Papardo n Degree-Sign 31, P.O. Box 55, Vill. S. Agata 98166 Messina (Italy)

    2012-10-15

    Recently [S. Magazu et al., Rev. Sci. Instrum. 82, 105115 (2011)] we have proposed a new method for characterizing, by neutron scattering, the dynamical properties of complex material systems, such as, the ones of interest in the biophysical field. This approach called Resolution Elastic Neutron Scattering, in short RENS, is based on the detection of the elastically scattered neutron intensity as a function of the instrumental energy resolution. By experimental, theoretical, and numerical findings, we have pointed out that an inflection point occurs in the elastic intensity when the system relaxation time approaches the instrumental energy resolution time. This approach, differently from quasi-elastic neutron scattering (QENS), gives the chance to evaluate the system relaxation times without using pre-defined models that can be wrong and/or misleading. Here, we reply to a Comment on the above-mentioned main paper in which Wuttke proposes a different approach to evaluate the above-mentioned inflection point; on this regard, it should be noticed that the existence of the inflection point, which is the main topic of our work, is not questioned and that the approach proposed by Wuttke in the Comment, although valid for a class of dynamical processes, is not applicable when different and distinct processes occur simultaneously at different time scale.

  6. Multi-baseline interferometric synthetic aperture radar applications and error analysis

    E-Print Network [OSTI]

    Chua, Song Liang

    2007-01-01

    In this thesis, we deal primarily with the multi-baseline SAR configuration utilizing three satellites. Two applications of InSAR, multi-baseline height retrieval and multi-baseline compensation of CCD's slope biasing ...

  7. FHR Process Instruments

    SciTech Connect (OSTI)

    Holcomb, David Eugene

    2015-01-01

    Fluoride salt-cooled High temperature Reactors (FHRs) are entering into early phase engineering development. Initial candidate technologies have been identified to measure all of the required process variables. The purpose of this paper is to describe the proposed measurement techniques in sufficient detail to enable assessment of the proposed instrumentation suite and to support development of the component technologies. This paper builds upon the instrumentation chapter of the recently published FHR technology development roadmap. Locating instruments outside of the intense core radiation and high-temperature fluoride salt environment significantly decreases their environmental tolerance requirements. Under operating conditions, FHR primary coolant salt is a transparent, low-vapor-pressure liquid. Consequently, FHRs can employ standoff optical measurements from above the salt pool to assess in-vessel conditions. For example, the core outlet temperature can be measured by observing the fuel s blackbody emission. Similarly, the intensity of the core s Cerenkov glow indicates the fission power level. Short-lived activation of the primary coolant provides another means for standoff measurements of process variables. The primary coolant flow and neutron flux can be measured using gamma spectroscopy along the primary coolant piping. FHR operation entails a number of process measurements. Reactor thermal power and core reactivity are the most significant variables for process control. Thermal power can be determined by measuring the primary coolant mass flow rate and temperature rise across the core. The leading candidate technologies for primary coolant temperature measurement are Au-Pt thermocouples and Johnson noise thermometry. Clamp-on ultrasonic flow measurement, that includes high-temperature tolerant standoffs, is a potential coolant flow measurement technique. Also, the salt redox condition will be monitored as an indicator of its corrosiveness. Both electrochemical techniques and optical spectroscopy are candidate fluoride salt redox measurement methods. Coolant level measurement can be performed using radar-level gauges located in standpipes above the reactor vessel. While substantial technical development remains for most of the instruments, industrially compatible instruments based upon proven technology can be reasonably extrapolated from the current state of the art.

  8. Multiproject baselines for evaluation of electric power projects

    SciTech Connect (OSTI)

    Sathaye, Jayant; Murtishaw, Scott; Price, Lynn; Lefranc, Maurice; Roy, Joyashree; Winkler, Harald; Spalding-Fecher, Randall

    2003-03-12

    Calculating greenhouse gas emissions reductions from climate change mitigation projects requires construction of a baseline that sets emissions levels that would have occurred without the project. This paper describes a standardized multiproject methodology for setting baselines, represented by the emissions rate (kg C/kWh), for electric power projects. A standardized methodology would reduce the transaction costs of projects. The most challenging aspect of setting multiproject emissions rates is determining the vintage and types of plants to include in the baseline and the stringency of the emissions rates to be considered, in order to balance the desire to encourage no- or low-carbon projects while maintaining environmental integrity. The criteria for selecting power plants to include in the baseline depend on characteristics of both the project and the electricity grid it serves. Two case studies illustrate the application of these concepts to the electric power grids in eastern India and South Africa. We use hypothetical, but realistic, climate change projects in each country to illustrate the use of the multiproject methodology, and note the further research required to fully understand the implications of the various choices in constructing and using these baselines.

  9. Way to increase the user access at the LCLS baseline

    E-Print Network [OSTI]

    Geloni, Gianluca; Saldin, Evgeni

    2010-01-01

    The LCLS beam is meant for a single user, but the baseline undulator is long enough to serve two users simultaneously. To this end, we propose a setup composed of two elements: an X-ray mirrors pair for X-ray beam deflection, and a 4 m-long magnetic chicane, which creates an offset for mirrors pair installation in the middle of the baseline undulator. The insertable mirrors pair can separate spatially the X-ray beams generated in the first and in the second half of the baseline undulator. Rapid switching of the FEL amplification process allows deactivating one half and activating another half of the undulator. As proposed elsewhere, using a kicker installed upstream of the LCLS baseline undulator and an already existing corrector in the first half of the undulator, it is possible to rapidly switch the X-ray beam from one user to another. We present simulation results for the LCLS baseline, and show that it is possible to generate two saturated SASE X-ray beams in the whole 0.8-8 keV photon energy range in the...

  10. ABB SCADA/EMS System INEEL Baseline Summary Test Report (November...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ABB SCADAEMS System INEEL Baseline Summary Test Report (November 2004) ABB SCADAEMS System INEEL Baseline Summary Test Report (November 2004) This document covers the security...

  11. Functional Testing Protocols for Commercial Building Efficiency Baseline Modeling Software

    SciTech Connect (OSTI)

    Jump, David; Price, Phillip N.; Granderson, Jessica; Sohn, Michael

    2013-09-06

    This document describes procedures for testing and validating proprietary baseline energy modeling software accuracy in predicting energy use over the period of interest, such as a month or a year. The procedures are designed according to the methodology used for public domain baselining software in another LBNL report that was (like the present report) prepared for Pacific Gas and Electric Company: ?Commercial Building Energy Baseline Modeling Software: Performance Metrics and Method Testing with Open Source Models and Implications for Proprietary Software Testing Protocols? (referred to here as the ?Model Analysis Report?). The test procedure focuses on the quality of the software?s predictions rather than on the specific algorithms used to predict energy use. In this way the software vendor is not required to divulge or share proprietary information about how their software works, while enabling stakeholders to assess its performance.

  12. POLYPHONIC INSTRUMENT RECOGNITION SPECTRAL CLUSTERING

    E-Print Network [OSTI]

    Tzanetakis, George

    POLYPHONIC INSTRUMENT RECOGNITION USING SPECTRAL CLUSTERING Luis Gustavo Martins Telecommunications]@uvic.ca ABSTRACT The identification of the instruments playing in a poly- phonic music signal is an important source separation and tim- bre classification of polyphonic, multi-instrumental music signals. The sound

  13. Instrumental Artifact Functions and Normativity

    E-Print Network [OSTI]

    Hughes, Jesse

    Instrumental Artifact Functions and Normativity Jesse Hughes February 17, 2011 Abstract Artifact use it to achieve our ends. The notion of instrumental functions has recently been in- troduced of instrumental func- tions are investigated, including both agent norms (concerning how and when an artifact

  14. 200-BP-5 operable unit Technical Baseline report

    SciTech Connect (OSTI)

    Jacques, I.D.; Kent, S.K.

    1991-10-01

    This report supports development of a remedial investigation/feasibility study work plan for the 200-BP-5 operable unit. The report summarizes baseline information for waste sites and unplanned release sites located in the 200-BP-5 operable unit. The sites were investigated by the Technical Baseline Section of the Environmental Engineering Group, Westinghouse Hanford Company (Westinghouse Hanford). The investigation consisted of review and evaluation of current and historical Hanford Site reports, drawings, and photographs, and was supplemented with recent inspections of the Hanford Site and employee interviews. No field investigations or sampling were conducted.

  15. TMT Science and Instruments

    E-Print Network [OSTI]

    David Crampton; Luc Simard; David Silva

    2008-01-23

    To meet the scientific goals of the Thirty Meter Telescope Project, full diffraction-limited performance is required from the outset and hence the entire observatory is being designed, as a system, to achieve this. The preliminary design phases of the telescope and the first light adaptive optic facility are now approaching completion so that much better predictions of the system performance are possible. The telescope design and instrumentation are summarized in this presentation, with a brief description of some of the scientific programs that are foreseen.

  16. ARM - Site Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach HomeA Better AnodeThe Influence of Clouds,convection defined by the MSGgovFieldFacilitiesInstruments AMF

  17. ARM - Site Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach HomeA Better AnodeThe Influence of Clouds,convection defined by the MSGgovFieldFacilitiesInstruments

  18. ARM - Site Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach HomeA Better AnodeThe Influence of Clouds,convection defined by the MSGgovFieldFacilitiesInstrumentsLos

  19. ARM - Site Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach HomeA Better AnodeThe Influence of Clouds,convection defined by theNiamey, Niger, West AfricaInstruments

  20. ARM - Site Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach HomeA Better AnodeThe Influence of Clouds,convection defined by theNiamey,Manus Site-InactiveInstruments

  1. WNR Instrument Contacts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos and Videos Videos Re-Entry and OtherInstrument

  2. ARM - RHUBC II Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrnBarrow, Alaska OutreachCalendarPress Releases Related2 Science TeamLinksInstruments

  3. ARM - Recovery Act Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrnBarrow, Alaska OutreachCalendarPress Releases Related2ActRecovery Act Instruments

  4. ARM - Site Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrnBarrow, Alaska OutreachCalendarPressExtended Facility8 ScienceInactiveInstruments

  5. ARM - Site Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrnBarrow, Alaska OutreachCalendarPressExtended Facility8PlainsInstruments SGP Related

  6. ARM - Site Instruments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrnBarrow, Alaska OutreachCalendarPressExtended Facility8PlainsInstruments SGP

  7. ARM - Instrument - 50rwp

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments? WeDatastreamstps DocumentationAtlanticENAField ParticipantsFieldFormsIngest ReadinessgovInstruments50rwp

  8. Automated baseline change detection phase I. Final report

    SciTech Connect (OSTI)

    NONE

    1995-12-01

    The Automated Baseline Change Detection (ABCD) project is supported by the DOE Morgantown Energy Technology Center (METC) as part of its ER&WM cross-cutting technology program in robotics. Phase 1 of the Automated Baseline Change Detection project is summarized in this topical report. The primary objective of this project is to apply robotic and optical sensor technology to the operational inspection of mixed toxic and radioactive waste stored in barrels, using Automated Baseline Change Detection (ABCD), based on image subtraction. Absolute change detection is based on detecting any visible physical changes, regardless of cause, between a current inspection image of a barrel and an archived baseline image of the same barrel. Thus, in addition to rust, the ABCD system can also detect corrosion, leaks, dents, and bulges. The ABCD approach and method rely on precise camera positioning and repositioning relative to the barrel and on feature recognition in images. In support of this primary objective, there are secondary objectives to determine DOE operational inspection requirements and DOE system fielding requirements.

  9. BASELINE DESIGN/ECONOMICS FOR ADVANCED FISCHER-TROPSCH TECHNOLOGY

    SciTech Connect (OSTI)

    1998-04-01

    Bechtel, along with Amoco as the main subcontractor, developed a Baseline design, two alternative designs, and computer process simulation models for indirect coal liquefaction based on advanced Fischer-Tropsch (F-T) technology for the U. S. Department of Energy's (DOE's) Federal Energy Technology Center (FETC).

  10. Overview of the North Coast MPA Baseline Program

    E-Print Network [OSTI]

    Jaffe, Jules

    & Socioeconomic scope 10 Ecosystem Features Traditional Ecological Knowledge · Contextual Information e new contextual information More information on RFP p. 3-6 #12;North Coast Ecosystem Features.g., fisheries information, physical oceanographic information Baseline Program funds cannot be used to collect

  11. 2004 Compliance Recertification Application Performance Assessment Baseline Calculation

    E-Print Network [OSTI]

    2004 Compliance Recertification Application Performance Assessment Baseline Calculation Revision O Sandia National Laboratories Waste Isolation Pilot Plant 2004 Compliance Recertification Application (2 ~"f, Date QA Review Mario Chavez Print WIPP: 1.4.1.1.:P A:QA-L:540232 lof153 #12;2004 Compliance

  12. Degree-1 Earth deformation from very long baseline interferometry measurements

    E-Print Network [OSTI]

    Faulds, James E.

    of the center of mass of the Earth system through satellite orbit models and the former purely on observing earth and the center of mass of the entire Earth system (Earth, oceans and atmosphere). The load momentDegree-1 Earth deformation from very long baseline interferometry measurements D. Lavalle´e and G

  13. Revised SRC-I project baseline. Volume 2

    SciTech Connect (OSTI)

    Not Available

    1984-01-01

    The SRC Process Area Design Baseline consists of six volumes. The first four were submitted to DOE on 9 September 1981. The fifth volume, summarizing the Category A Engineering Change Proposals (ECPs), was not submitted. The sixth volume, containing proprietary information on Kerr-McGee's Critical Solvent Deashing System, was forwarded to BRHG Synthetic Fuels, Inc. for custody, according to past instructions from DOE, and is available for perusal by authorized DOE representatives. DOE formally accepted the Design Baseline under ICRC Release ECP 4-1001, at the Project Configuration Control Board meeting in Oak Ridge, Tennessee on 5 November 1981. The documentation was then revised by Catalytic, Inc. to incorporate the Category B and C and Post-Baseline Engineering Change Proposals. Volumes I through V of the Revised Design Baseline, dated 22 October 1982, are nonproprietary and they were issued to the DOE via Engineering Change Notice (ECN) 4-1 on 23 February 1983. Volume VI again contains proprieary information on Kerr-McGee Critical Solvent Deashing System; it was issued to Burns and Roe Synthetic Fuels, Inc. Subsequently, updated process descriptions, utility summaries, and errata sheets were issued to the DOE and Burns and Roe Synthetic Fuels, Inc. on nonproprietary Engineering Change Notices 4-2 and 4-3 on 24 May 1983.

  14. Historical forest baselines reveal potential for continued carbon sequestration

    E-Print Network [OSTI]

    Mladenoff, David

    Historical forest baselines reveal potential for continued carbon sequestration Jeanine M-based studies suggest that land-use history is a more important driver of carbon sequestration in these systems agricultural lands are being promoted as important avenues for future carbon sequestration (8). But the degree

  15. An Alternative Baseline Methodology for the Power Sector

    E-Print Network [OSTI]

    An Alternative Baseline Methodology for the Power Sector - Taking a Systemic Approach Jakob Asger in August 2005 to discuss the international future strategy of climate policies. Both events put our work process from idea to final thesis. Further we would like to express our warm thanks to Senior Energy

  16. Revised SRC-I project baseline. Volume 1

    SciTech Connect (OSTI)

    Not Available

    1984-01-01

    International Coal Refining Company (ICRC), in cooperation with the Commonwealth of Kentucky has contracted with the United States Department of Energy (DOE) to design, build and operate a first-of-its-kind plant demonstrating the economic, environmental, socioeconomic and technical feasibility of the direct coal liquefaction process known as SRC-I. ICRC has made a massive commitment of time and expertise to design processes, plan and formulate policy, schedules, costs and technical drawings for all plant systems. These fully integrated plans comprise the Project Baseline and are the basis for all future detailed engineering, plant construction, operation, and other work set forth in the contract between ICRC and the DOE. Volumes I and II of the accompanying documents constitute the updated Project Baseline for the SRC-I two-stage liquefaction plant. International Coal Refining Company believes this versatile plant design incorporates the most advanced coal liquefaction system available in the synthetic fuels field. SRC-I two-stage liquefaction, as developed by ICRC, is the way of the future in coal liquefaction because of its product slate flexibility, high process thermal efficiency, and low consumption of hydrogen. The SRC-I Project Baseline design also has made important state-of-the-art advances in areas such as environmental control systems. Because of a lack of funding, the DOE has curtailed the total project effort without specifying a definite renewal date. This precludes the development of revised accurate and meaningful schedules and, hence, escalated project costs. ICRC has revised and updated the original Design Baseline to include in the technical documentation all of the approved but previously non-incorporated Category B and C and new Post-Baseline Engineering Change Proposals.

  17. Instrumented Pipeline Initiative

    SciTech Connect (OSTI)

    Thomas Piro; Michael Ream

    2010-07-31

    This report summarizes technical progress achieved during the cooperative agreement between Concurrent Technologies Corporation (CTC) and U.S. Department of Energy to address the need for a for low-cost monitoring and inspection sensor system as identified in the Department of Energy (DOE) National Gas Infrastructure Research & Development (R&D) Delivery Reliability Program Roadmap.. The Instrumented Pipeline Initiative (IPI) achieved the objective by researching technologies for the monitoring of pipeline delivery integrity, through a ubiquitous network of sensors and controllers to detect and diagnose incipient defects, leaks, and failures. This report is organized by tasks as detailed in the Statement of Project Objectives (SOPO). The sections all state the objective and approach before detailing results of work.

  18. Portable musical instrument amplifier

    DOE Patents [OSTI]

    Christian, David E. (Danbury, CT)

    1990-07-24

    The present invention relates to a musical instrument amplifier which is particularly useful for electric guitars. The amplifier has a rigid body for housing both the electronic system for amplifying and processing signals from the guitar and the system's power supply. An input plug connected to and projecting from the body is electrically coupled to the signal amplifying and processing system. When the plug is inserted into an output jack for an electric guitar, the body is rigidly carried by the guitar, and the guitar is operatively connected to the electrical amplifying and signal processing system without use of a loose interconnection cable. The amplifier is provided with an output jack, into which headphones are plugged to receive amplified signals from the guitar. By eliminating the conventional interconnection cable, the amplifier of the present invention can be used by musicians with increased flexibility and greater freedom of movement.

  19. Marine and Hydrokinetic Technology (MHK) Instrumentation, Measurement...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology (MHK) Instrumentation, Measurement, and Computer Modeling Workshop Marine and Hydrokinetic Technology (MHK) Instrumentation, Measurement, and Computer Modeling Workshop...

  20. STR/ITS: Instrument Selection

    Office of Environmental Management (EM)

    From sketch to finished product - TIDS fabrication Analytical Instrumentation Specs A) Fourier Transform Infrared Spectrometer (FTIR) Tool: JASCO 4200 CIC Photonics 4Runner (6...

  1. Tritium Instrument Demonstration Station (TIDS)

    Office of Environmental Management (EM)

    From sketch to finished product - TIDS fabrication Analytical Instrumentation Specs A) Fourier Transform Infrared Spectrometer (FTIR) Tool: JASCO 4200 CIC Photonics 4Runner (6...

  2. Profiler Instrumentation Using Metaprogramming Techniques

    E-Print Network [OSTI]

    Gray, Jeffrey G.

    Profiler Instrumentation Using Metaprogramming Techniques Ritu Arora, Yu Sun, Zekai Demirezen, Jeff manipulation) before it enters into the available class pool of an executing application. Javassist [9] (see

  3. Challenges in Accelerator Beam Instrumentation

    SciTech Connect (OSTI)

    Wendt, M.

    2009-12-01

    The challenges in beam instrumentation and diagnostics for present and future particle accelerator projects are presented. A few examples for advanced hadron and lepton beam diagnostics are given.

  4. Trials, tribulations, and pitfalls using commercial instruments for data acquisition

    SciTech Connect (OSTI)

    Lee,R.C.; Olsen, R. H.; Unger, K. L.

    2009-10-12

    Brookhaven National Laboratory's Relativistic Heavy Ion Collider (RHIC) uses many commercially available instruments - for example spectrum analyzers, oscilloscopes, digital volt meters, signal generators - as integral parts of instrumentation and control systems. Typically these systems are remotely controlled. Using commercial instruments has many benefits. Manufactures have the skill, knowledge, and experience to produce high quality products. The price performance ratio is hard to duplicate. There are also disadvantages. Proprietary interfaces, single platform drivers, and reliable operation provide challenges for implementation and unattended operation. Several of the systems used at RHIC will be described. Their issues and solutions will be presented.

  5. Instrumental Technologies vs Teaching Instruments: A challenge for Computational Linguists

    E-Print Network [OSTI]

    Instrumental Technologies vs Teaching Instruments: A challenge for Computational Linguists Robert, and offering access to a discourse database. The currently available Macintosh front-end can easily be ported personalized information filtering systems, determining contents and language levels of available materials

  6. Integrated Baseline System (IBS) Version 2.0: User guide

    SciTech Connect (OSTI)

    Bower, J.C. [Bower Software Services, Kennewick, WA (United States); Burford, M.J.; Downing, T.R.; Matsumoto, S.W.; Schrank, E.E.; Williams, J.R.; Winters, C.; Wood, B.M.

    1994-03-01

    The Integrated Baseline System (IBS) is an emergency management planning and analysis tool being developed under the direction of the Federal Emergency Management Agency. This User Guide explains how to start and use the IBS Program, which is designed to help civilian emergency management personnel to plan for and support their responses to a chemical-releasing event at a military chemical stockpile. The intended audience for this document is all users of the IBS, especially emergency management planners and analysts.

  7. Experimental Astronomy Astrophysical Instrumentation and

    E-Print Network [OSTI]

    1 23 Experimental Astronomy Astrophysical Instrumentation and Methods ISSN 0922-6435 Volume 34 available until 12 months after publication. #12;Exp Astron (2012) 34:203­242 DOI 10.1007/s10686-012-9309-y. Barucci · B. Cecconi · L. Lamy Laboratoire d'Etudes Spatiales et d'Instrumentation en Astrophysique

  8. Experimental Astronomy Astrophysical Instrumentation and

    E-Print Network [OSTI]

    Biggs, Juliet

    1 23 Experimental Astronomy Astrophysical Instrumentation and Methods ISSN 0922-6435 Exp Astron DOI available until 12 months after publication. #12;Exp Astron DOI 10.1007/s10686-011-9244-3 ORIGINAL ARTICLE. Three instrument suites will address specific surface, atmosphere and ionosphere science goals

  9. D0 Instrument Air System

    SciTech Connect (OSTI)

    Serges, T.J.; /Fermilab

    1988-09-15

    The main function of the instrument air system is to operate control valves associated with the cryogenics in the D0 hall. Occasionally, it will be used for purging purposes. Appendix A shows a schematic of the air instrument system along with a corresponding components list.

  10. GASS: The Parkes Galactic All-Sky Survey. Update: improved correction for instrumental effects and new data release

    E-Print Network [OSTI]

    Kalberla, Peter M W

    2015-01-01

    The Galactic All-Sky Survey is a survey of Galactic atomic hydrogen emission in the southern sky observed with the Parkes 64-m Radio Telescope. The first data release (GASS I) concerned survey goals and observing techniques, the second release (GASS II) focused on stray radiation and instrumental corrections. We seek to remove the remaining instrumental effects and present a third data release. We use the HEALPix tessellation concept to grid the data on the sphere. Individual telescope records are compared with averages on the nearest grid position for significant deviations. All averages are also decomposed into Gaussian components with the aim of segregating unacceptable solutions. Improved priors are used for an iterative baseline fitting and cleaning. In the last step we generate 3-D FITS data cubes and examine them for remaining problems. We have removed weak, but systematic baseline offsets with an improved baseline fitting algorithm. We have unraveled correlator failures that cause time dependent oscil...

  11. 200-UP-2 Operable Unit technical baseline report

    SciTech Connect (OSTI)

    Deford, D.H.

    1991-02-01

    This report is prepared in support of the development of a Remedial Investigation/Feasibility Study (RI/FS) Work Plan for the 200-UP-2 Operable Unit by EBASCO Environmental, Incorporated. It provides a technical baseline of the 200-UP-2 Operable Unit and results from an environmental investigation undertaken by the Technical Baseline Section of the Environmental Engineering Group, Westinghouse Hanford Company (Westinghouse Hanford). The 200-UP-2 Operable Unit Technical Baseline Report is based on review and evaluation of numerous Hanford Site current and historical reports, Hanford Site drawings and photographs and is supplemented with Hanford Site inspections and employee interviews. No field investigations or sampling were conducted. Each waste site in the 200-UP-2 Operable Unit is described separately. Close relationships between waste units, such as overflow from one to another, are also discussed. The 200-UP-2 Operable Unit consists of liquid-waste disposal sites in the vicinity of, and related to, U Plant operations in the 200 West Area of the Hanford Site. The U Plant'' refers to the 221-U Process Canyon Building, a chemical separations facility constructed during World War 2. It also includes the Uranium Oxide (UO{sub 3}) Plant, which was constructed at the same time and, like the 221-U Process Canyon Building, was later converted for other missions. Waste sites in the 200-UP-2 Operable Unit are associated with the U Plant Uranium Metal Recovery Program mission that occurred between 1952 and 1958 and the UO{sub 3} Plant's ongoing uranium oxide mission and include one or more cribs, reverse wells, french drains, septic tanks and drain fields, trenches, catch tanks, settling tanks, diversion boxes, waste vaults, and the lines and encasements that connect them. 11 refs., 1 tab.

  12. Principal Components Instrumental Variable Estimation

    E-Print Network [OSTI]

    Winkelried, Diego; Smith, Richard J.

    2011-01-31

    badly if the IV do not admit a factor representation 3 (cf., Kapetanios and Marcellino, 2006). We rely instead on a vague notion of correlation among instruments (assumption A5 or A6 below), as the merits of the PCIVE depend on the instruments displaying... Assumption A4. Hence, Assumption A4 simply places a bound for ??? such that the implied restriction on the 6 explanatory power of the instruments in (3) also holds in matrix norms. 2.1 The Case for a Lower-Dimensional IVE We study the properties of estimators...

  13. LBNE-PWG-004 The 2010 Interim Report of the Long-Baseline Neutrino Experiment Collaboration

    E-Print Network [OSTI]

    McDonald, Kirk

    . Drake,2 A. Drozhdin,20 H. Duyang,56 S. Dye,21 T. Dykhuis,20 D. Edmunds,38 S. Elliott,35 S. Enomoto,65 J. Svoboda,6 B. Szczerbinska,17 A. Szelc,69 R. Talaga,2 H. Tanaka,5 R. Tayloe,27 D. Taylor,32 J. Thomas,34 L

  14. The Long-Baseline Neutrino Experiment Status of the LBNE Neutrino Beamline

    E-Print Network [OSTI]

    McDonald, Kirk

    Aiming for CD-1 (conceptual design) review in Spring of 2012August 2, 2011 Ross Shaft Ross Shaft Yates Shaft Yates Shaft 33kT LAr 200kT WCD #12;Additional milestones August 2, 2011 Vaia Papadimitriou · NSF

  15. Vietnam-Danish Government Baseline Workstream | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-EnhancingEt Al.,Turin, NewArkansas:Standards JumpUSA JumpVideoconVientiane,Baseline

  16. Integrated Baseline System (IBS) Version 2.0: Utilities Guide

    SciTech Connect (OSTI)

    Burford, M.J.; Downing, T.R.; Williams, J.R.; Bower, J.C.

    1994-03-01

    The Integrated Baseline System (IBS) is an emergency management planning and analysis tool being developed under the direction of the US Army Nuclear and Chemical Agency. This Utilities Guide explains how you can use the IBS utility programs to manage and manipulate various kinds of IBS data. These programs include utilities for creating, editing, and displaying maps and other data that are referenced to geographic location. The intended audience for this document are chiefly data managers but also system managers and some emergency management planners and analysts.

  17. Integrated Baseline System (IBS) Version 1.03: Utilities guide

    SciTech Connect (OSTI)

    Burford, M.J.; Downing, T.R.; Pottier, M.C.; Schrank, E.E.; Williams, J.R.

    1993-01-01

    The Integrated Baseline System (IBS) is an emergency management planning and analysis tool that was developed under the direction of the Federal Emergency Management Agency (FEMA). This Utilities Guide explains how to operate utility programs that are supplied as a part of the IBS. These utility programs are chiefly for managing and manipulating various kinds of IBS data and system administration files. Many of the utilities are for creating, editing, converting, or displaying map data and other data that are related to geographic location.

  18. Integrated Baseline System (IBS) Version 2.0: Models guide

    SciTech Connect (OSTI)

    Not Available

    1994-03-01

    The Integrated Baseline System (IBS) is an emergency management planning and analysis tool being developed under the direction of the US Army Nuclear and Chemical Agency. This Models Guide summarizes the IBS use of several computer models for predicting the results of emergency situations. These include models for predicting dispersion/doses of airborne contaminants, traffic evacuation, explosion effects, heat radiation from a fire, and siren sound transmission. The guide references additional technical documentation on the models when such documentation is available from other sources. The audience for this manual is chiefly emergency management planners and analysts, but also data managers and system managers.

  19. DESIGNING FOR INSTRUMENT-MEDIATED

    E-Print Network [OSTI]

    Bertelsen, Olav W.

    INSTRUMENTS: A DEVELOPMENTAL AND ANTHROPOCENTRIC POINT OF VIEW In psychology and ergonomics in French (both theoretical and practical), have allowed French language ergonomics to build up a solid background

  20. Project no. 004089 Instrument : IP

    E-Print Network [OSTI]

    Guichard, Francoise

    Project no. 004089 AMMA Instrument : IP D.2.1.A.e The impacts of contrasting atmospheric convective available potential energy (CAPE). This finding is consistent with observations that daytime

  1. An " Instrumentalism to Realism " Hypothesis

    E-Print Network [OSTI]

    Afsar Abbas

    2005-11-05

    It is proposed here that all successful and complete theories always proceed through an intermediate stage of instrumentalism to the final stage of realism. Examples from history of science (both classical and modern) in support of this hypothesis are presented.

  2. Departmental Business Instrument Numbering System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-01-27

    The Order prescribes the procedures for assigning identifying numbers to all Department of Energy (DOE) and National Nuclear Security Administration (NNSA) business instruments. Cancels DOE O 540.1. Canceled by DOE O 540.1B.

  3. Departmental Business Instrument Numbering System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-12-05

    To prescribe procedures for assigning identifying numbers to all Department of Energy (DOE), including the National Nuclear Security Administration, business instruments. Cancels DOE 1331.2B. Canceled by DOE O 540.1A.

  4. Baseline LHC machine parameters and configuration of the 2015 proton run

    E-Print Network [OSTI]

    R. Bruce; G. Arduini; S. Fartoukh; M. Giovannozzi; M. Lamont; E. Metral; T. Pieloni; S. Redaelli; J. Wenninger

    2014-10-22

    This paper shows the baseline LHC machine parameters for the 2015 start-up. Many systems have been upgraded during LS1 and in 2015 the LHC will operate at a higher energy than before and with a tighter filling scheme. Therefore, the 2015 commissioning phase risks to be less smooth than in 2012. The proposed starting configuration puts the focus on feasibility rather than peak performance and includes margins for operational uncertainties. Instead, once beam experience and a better machine knowledge has been obtained, a push in $\\beta^*$ and performance can be envisaged. In this paper, the focus is on collimation settings and reach in $\\beta^*$---other parameters are covered in greater depth by other papers in these proceedings.

  5. Determination of the relativistic parameter gamma using very long baseline interferometry

    E-Print Network [OSTI]

    S. B. Lambert; C. Le Poncin-Lafitte

    2009-03-09

    Relativistic bending in the vicinity of a massive body is characterized only by the post-Newtonian parameter $\\gamma$ within the standard parameterized post-Newtonian formalism, which is unity in General Relativity. Aiming at estimating this parameter, we use very long baseline interferometry (VLBI) to measure the gravitational deflection of radio waves emitted by distant compact radio sources, by Solar System bodies. We analyze geodetic VLBI observations recorded since 1979. We compare estimates of $\\gamma$ and errors obtained using various analysis schemes including global estimations over several time spans and with various Sun elongation cut-off angles, and analysis of radio source coordinate time series. We arrive at the conclusion that the relativistic parameter $\\gamma$ cannot be estimated at better than $2\\times10^{-4}$. The main factor of limitation is the uncertainty in the determination of (global or session-wise) radio source coordinates. A sum of various instrumental and modeling errors and analysis strategy defects, that cannot be decorrelated and corrected yet, is at the origin of the limitating noise.

  6. Baseline Glass Development for Combined Fission Products Waste Streams

    SciTech Connect (OSTI)

    Crum, Jarrod V.; Billings, Amanda Y.; Lang, Jesse B.; Marra, James C.; Rodriguez, Carmen P.; Ryan, Joseph V.; Vienna, John D.

    2009-06-29

    Borosilicate glass was selected as the baseline technology for immobilization of the Cs/Sr/Ba/Rb (Cs), lanthanide (Ln) and transition metal fission product (TM) waste steams as part of a cost benefit analysis study.[1] Vitrification of the combined waste streams have several advantages, minimization of the number of waste forms, a proven technology, and similarity to waste forms currently accepted for repository disposal. A joint study was undertaken by Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) to develop acceptable glasses for the combined Cs + Ln + TM waste streams (Option 1) and Cs + Ln combined waste streams (Option 2) generated by the AFCI UREX+ set of processes. This study is aimed to develop baseline glasses for both combined waste stream options and identify key waste components and their impact on waste loading. The elemental compositions of the four-corners study were used along with the available separations data to determine the effect of burnup, decay, and separations variability on estimated waste stream compositions.[2-5] Two different components/scenarios were identified that could limit waste loading of the combined Cs + LN + TM waste streams, where as the combined Cs + LN waste stream has no single component that is perceived to limit waste loading. Combined Cs + LN waste stream in a glass waste form will most likely be limited by heat due to the high activity of Cs and Sr isotopes.

  7. Eielson Air Force Base OU-1 baseline risk assessment

    SciTech Connect (OSTI)

    Jarvis, M.T.; Jarvis, T.T.; Van Houten, N.C.; Lewis, R.E.

    1993-09-01

    This Baseline Risk Assessment report is the second volume in a set of three volumes for operable Unit 1 (OU-1). The companion documents contain the Remedial Investigation and the Feasibility Study. Operable Unit 1 (OU-1) is one of several groups of hazardous waste sites located at Eielson Air Force Base (AFB) near Fairbanks, Alaska. The operable units at Eielson are typically characterized by petroleum, oil, lubricant/solvent contamination, and by the presence of organics floating at the water table. In 1989 and 1990, firms under contract to the Air Force conducted field studies to gather information about the extent of chemical contamination in soil, groundwater, and soil air pore space (soil gas) at the site. This report documents the results of a baseline risk assessment, which uses the 1989 and 1991 site characterization database to quantify the potential human health risk associated with past Base industrial activities in the vicinity of OU-1. Background data collected in 1992 were also used in the preparation of this report.

  8. METEOROLOGY 163: Meteorological Instrumentation Course Description

    E-Print Network [OSTI]

    Clements, Craig

    1 METEOROLOGY 163: Meteorological Instrumentation Course Description In this course students will learn different measurement techniques and the instrumentation used in the atmospheric sciences to the techniques of instrument calibration, deployment, and data acquisition. Students will become familiar

  9. Sandia Energy - Rotor Blade Sensors and Instrumentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blade Sensors and Instrumentation Home Stationary Power Energy Conversion Efficiency Wind Energy Rotor Innovation Rotor Blade Sensors and Instrumentation Rotor Blade Sensors and...

  10. Nuclear power reactor instrumentation systems handbook. Volume...

    Office of Scientific and Technical Information (OSTI)

    Nuclear power reactor instrumentation systems handbook. Volume 1 Citation Details In-Document Search Title: Nuclear power reactor instrumentation systems handbook. Volume 1 You...

  11. Nuclear Instruments and Methods in Physics Research A ] (

    E-Print Network [OSTI]

    U N C O R R EC TED PR O O F Nuclear Instruments and Methods in Physics Research to a crystal mass of about 450 mg. Requirements on energy and time resolutions are not too stringent, therefore technique. From a safe extrapolation of the Milano neutrino mass experi- ment (MIBETA) results [2

  12. Solar Energy Research Center Instrumentation Facility

    SciTech Connect (OSTI)

    Meyer, Thomas, J.; Papanikolas, John, P.

    2011-11-11

    SOLAR ENERGY RESEARCH CENTER INSTRUMENTATION FACILITY The mission of the Solar Energy Research Center (UNC SERC) at the University of North Carolina at Chapel Hill (UNC-CH) is to establish a world leading effort in solar fuels research and to develop the materials and methods needed to fabricate the next generation of solar energy devices. We are addressing the fundamental issues that will drive new strategies for solar energy conversion and the engineering challenges that must be met in order to convert discoveries made in the laboratory into commercially available devices. The development of a photoelectrosynthesis cell (PEC) for solar fuels production faces daunting requirements: (1) Absorb a large fraction of sunlight; (2) Carry out artificial photosynthesis which involves multiple complex reaction steps; (3) Avoid competitive and deleterious side and reverse reactions; (4) Perform 13 million catalytic cycles per year with minimal degradation; (5) Use non-toxic materials; (6) Cost-effectiveness. PEC efficiency is directly determined by the kinetics of each reaction step. The UNC SERC is addressing this challenge by taking a broad interdisciplinary approach in a highly collaborative setting, drawing on expertise across a broad range of disciplines in chemistry, physics and materials science. By taking a systematic approach toward a fundamental understanding of the mechanism of each step, we will be able to gain unique insight and optimize PEC design. Access to cutting-edge spectroscopic tools is critical to this research effort. We have built professionally-staffed facilities equipped with the state-of the-art instrumentation funded by this award. The combination of staff, facilities, and instrumentation specifically tailored for solar fuels research establishes the UNC Solar Energy Research Center Instrumentation Facility as a unique, world-class capability. This congressionally directed project funded the development of two user facilities: TASK 1: SOLAR DEVICE FABRICATION LABORATORY DEVELOPMENT The space allocated for this laboratory was �¢����shell space�¢��� that required an upfit in order to accommodate nano-fabrication equipment in a quasi-clean room environment. This construction project (cost $279,736) met the non-federal cost share requirement of $250,000 for this award. The central element of the fabrication laboratory is a new $400,000+ stand-alone system, funded by other sources, for fabricating and characterizing photovoltaic devices, in a state-of-the-art nanofabrication environment. This congressionally directed project also included the purchase of an energy dispersive x-ray analysis (EDX) detector for a pre-existing transmission electron microscope (TEM). This detector allows elemental analysis and elemental mapping of materials used to fabricate solar energy devices which is a key priority for our research center. TASK 2: SOLAR ENERGY SPECTROSCOPY LABORATORY DEVELOPMENT (INSTRUMENTATION) This laboratory provides access to modern spectroscopy and photolysis instrumentation for characterizing devices, materials and components on time scales ranging from femtoseconds to seconds and for elucidating mechanisms. The goals of this congressionally directed project included the purchase and installation of spectroscopy and photolysis instrumentation that would substantially and meaningfully enhance the capabilities of this laboratory. Some changes were made to the list of equipment proposed in the original budget. These changes did not represent a change in scope, approach or aims of this project. All of the capabilities and experiments represented in the original budget were maintained. The outcome of this Congressionally Directed Project has been the development of world-class fabrication and spectroscopy user facilities for solar fuels research at UNC-CH. This award has provided a significant augmentation of our pre-existing instrumentation capabilities which were funded by earlier UNC SERC projects, including the Energy Frontier

  13. Development Of Regional Climate Mitigation Baseline For A DominantAgro-Ecological Zone Of Karnataka, India

    SciTech Connect (OSTI)

    Sudha, P.; Shubhashree, D.; Khan, H.; Hedge, G.T.; Murthy, I.K.; Shreedhara, V.; Ravindranath, N.H.

    2007-06-01

    Setting a baseline for carbon stock changes in forest andland use sector mitigation projects is an essential step for assessingadditionality of the project. There are two approaches for settingbaselines namely, project-specific and regional baseline. This paperpresents the methodology adopted for estimating the land available formitigation, for developing a regional baseline, transaction cost involvedand a comparison of project-specific and regional baseline. The studyshowed that it is possible to estimate the potential land and itssuitability for afforestation and reforestation mitigation projects,using existing maps and data, in the dry zone of Karnataka, southernIndia. The study adopted a three-step approach for developing a regionalbaseline, namely: i) identification of likely baseline options for landuse, ii) estimation of baseline rates of land-use change, and iii)quantification of baseline carbon profile over time. The analysis showedthat carbon stock estimates made for wastelands and fallow lands forproject-specific as well as the regional baseline are comparable. Theratio of wasteland Carbon stocks of a project to regional baseline is1.02, and that of fallow lands in the project to regional baseline is0.97. The cost of conducting field studies for determination of regionalbaseline is about a quarter of the cost of developing a project-specificbaseline on a per hectare basis. The study has shown the reliability,feasibility and cost-effectiveness of adopting regional baseline forforestry sectormitigation projects.

  14. Sandia National Laboratories, California proposed CREATE facility environmental baseline survey.

    SciTech Connect (OSTI)

    Catechis, Christopher Spyros

    2013-10-01

    Sandia National Laboratories, Environmental Programs completed an environmental baseline survey (EBS) of 12.6 acres located at Sandia National Laboratories/California (SNL/CA) in support of the proposed Collaboration in Research and Engineering for Advanced Technology and Education (CREATE) Facility. The survey area is comprised of several parcels of land within SNL/CA, County of Alameda, California. The survey area is located within T 3S, R 2E, Section 13. The purpose of this EBS is to document the nature, magnitude, and extent of any environmental contamination of the property; identify potential environmental contamination liabilities associated with the property; develop sufficient information to assess the health and safety risks; and ensure adequate protection for human health and the environment related to a specific property.

  15. Direct coal liquefaction baseline design and system analysis

    SciTech Connect (OSTI)

    Not Available

    1991-04-01

    The primary objective of the study is to develop a computer model for a base line direct coal liquefaction design based on two stage direct coupled catalytic reactors. This primary objective is to be accomplished by completing the following: a base line design based on previous DOE/PETC results from Wilsonville pilot plant and other engineering evaluations; a cost estimate and economic analysis; a computer model incorporating the above two steps over a wide range of capacities and selected process alternatives; a comprehensive training program for DOE/PETC Staff to understand and use the computer model; a thorough documentation of all underlying assumptions for baseline economics; and a user manual and training material which will facilitate updating of the model in the future.

  16. Direct coal liquefaction baseline design and system analysis

    SciTech Connect (OSTI)

    Not Available

    1991-07-01

    The primary objective of the study is to develop a computer model for a base line direct coal liquefaction design based on two stage direct coupled catalytic reactors. This primary objective is to be accomplished by completing the following: a base line design based on previous DOE/PETC results from Wilsonville pilot plant and other engineering evaluations; a cost estimate and economic analysis; a computer model incorporating the above two steps over a wide range of capacities and selected process alternatives; a comprehensive training program for DOE/PETC Staff to understand and use the computer model; a thorough documentation of all underlying assumptions for baseline economics; and a user manual and training material which will facilitate updating of the model in the future.

  17. Laser-Ranging Long Baseline Differential Atom Interferometers for Space

    E-Print Network [OSTI]

    Chiow, Sheng-wey; Yu, Nan

    2015-01-01

    High sensitivity differential atom interferometers are promising for precision measurements in science frontiers in space, including gravity field mapping for Earth science studies and gravitational wave detection. We propose a new configuration of twin atom interferometers connected by a laser ranging interferometer (LRI-AI) to provide precise information of the displacements between the two AI reference mirrors and a means to phase-lock the two independent interferometer lasers over long distances, thereby further enhancing the feasibility of long baseline differential atom interferometers. We show that a properly implemented LRI-AI can achieve equivalent functionality to the conventional differential atom interferometer measurement system. LRI-AI isolates the laser requirements for atom interferometers and for optical phase readout between distant locations, thus enabling optimized allocation of available laser power within a limited physical size and resource budget. A unique aspect of LRI-AI also enables...

  18. Integrated Baseline Bystem (IBS) Version 1.03: Models guide

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The Integrated Baseline System)(IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planning and analysis. This document is the models guide for the IBS and explains how to use the emergency related computer models. This document provides information for the experienced system user, and is the primary reference for the computer modeling software supplied with the system. It is designed for emergency managers and planners, and others familiar with the concepts of computer modeling. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other IBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary.

  19. Internship experience at Texas Instruments: the internship report 

    E-Print Network [OSTI]

    Glover, Kerry Cloyce, 1954-

    2013-03-13

    T S T h e I n t e r n s h i p R e p o r t by K E R R Y C L O Y C E G L O V E R S u b m i t t e d to the C o l l e g e of E n g i n e e r i n g of T e x a s A & M U n i v e r s i t y i n p a r t i a l f u l f i l l m e n t for the d e g... r e e of D O C T O R OF E N G I N E E R I N G M a y 1982 M a j o r S u b j e c t : E l e c t r i c a l E n g i n e e r i n g T E X A S I N S T R U M E N T S The, I n t e r n s h i p R e p o r t by K E R R Y C L O Y C E G L O V E R A...

  20. INSTRUMENT EVALUATION, CALIBRATION, AND INSTALLATION POME HEATER EXPERIMENTS AT STRIPA

    E-Print Network [OSTI]

    Schrauf, T.

    2010-01-01

    MANDREL Fig. 9. Anchor creep test configuration. Fig. 10.this high-temperature creep test. Each anchor was brought,these high-temperature creep tests, the three anchors were

  1. INSTRUMENT EVALUATION, CALIBRATION, AND INSTALLATION POME HEATER EXPERIMENTS AT STRIPA

    E-Print Network [OSTI]

    Schrauf, T.

    2010-01-01

    functions of the contact angle, Poisson's ratio, and Because the rock modulus E decreases with temperature,

  2. Offshore megaproject instrumentation needs planning

    SciTech Connect (OSTI)

    Guerrero, V.

    1986-05-05

    The design and construction of the Statfjord ''C'' drilling/production platform in the North Sea is a good example of the demands a megaproject like this can put on instrumentation activities. The huge platform is in production in the Norwegian sector of the North Sea. It is a result of modern construction techniques. Such techniques emphasize the fabrication of large modular subassemblies limited in size only by the ability to transport or lift them into position. These modules are constructed as complete as possible before being assembled and interconnected to become an integrated whole. The instrumentation distributed throughout the modules must eventually be operated and maintained as systems. Therefore, these systems should have the same types of hardware and be installed in a uniform way. This article describes the coordination of instrumentation activities required to achieve this objective in an offshore platform project that consisted of some 30 modules built at 11 construction sites in 4 countries.

  3. 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop

    SciTech Connect (OSTI)

    none,

    2011-10-01

    The U.S. marine energy industry is actively pursuing development of offshore wind and marine hydrokinetic (MHK) energy systems. Experience in the wind energy sector demonstrates that new technology development requires thorough measurement and characterization of the environmental conditions prevalent at installation sites and of technology operating in the field. Presently, there are no turn-key instrumentation system solutions that meet the measurement needs of the marine energy industry. The 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop brought together technical experts from government laboratories, academia, and industry representatives from marine energy, wind, offshore oil and gas, and instrumentation developers to present and discuss the instrumentation needs of the marine energy industry. The goals of the meeting were to: 1. Share the latest relevant knowledge among technical experts; 2. Review relevant state-of-the-art field measurement technologies and methods; 3. Review lessons learned from recent field deployments; 4. Identify synergies across different industries; 5. Identify gaps between existing and needed instrumentation capabilities; 6. Understand who are the leading experts; 7. Provide a forum where stakeholders from the marine energy industry could provide substantive input in the development of new marine energy field deployable instrumentation packages.

  4. Formation Flying and Deformable Instruments

    SciTech Connect (OSTI)

    Rio, Yvon

    2009-05-11

    Astronomers have always attempted to build very stable instruments. They fight all that can cause mechanical deformation or image motion. This has led to well established technologies (autoguide, active optics, thermal control, tip/tilt correction), as well as observing methods based on the use of controlled motion (scanning, micro scanning, shift and add, chopping and nodding). Formation flying disturbs this practice. It is neither possible to reduce the relative motion to very small amplitudes, nor to control it at will. Some impacts on Simbol-X instrument design, and operation are presented.

  5. Thermography instruments for predictive maintenance

    SciTech Connect (OSTI)

    Palko, E.

    1993-08-12

    Thermography (infrared imaging, or IR scanning) is not only the most versatile predictive maintenance technology available today; it is, in general, the most cost-effective. Plant engineering can apply a virtually unlimited variety of predictive maintenance instruments, but all are restricted regarding the types of existing and incipient problems they can detect. Inplant applications of thermography, however, are truly limited only by the extent of the plant engineer's imagination. Here are ways that thermography can be used to fight downtime in plants, and factors to consider when selecting the best instrument for particular circumstances.

  6. International Conference Synchrotron Radiation Instrumentation SRI `94

    SciTech Connect (OSTI)

    Not Available

    1994-10-01

    This report contains abstracts for the international conference on Synchrotron Radiation Instrumentation at Brookhaven National Laboratory.

  7. Baseline for Climate Change: Modeling Watershed Aquatic Biodiversity Relative to Environmental and Anthropogenic Factors

    SciTech Connect (OSTI)

    Maurakis, Eugene G

    2010-10-01

    Objectives of the two-year study were to (1) establish baselines for fish and macroinvertebrate community structures in two mid-Atlantic lower Piedmont watersheds (Quantico Creek, a pristine forest watershed; and Cameron Run, an urban watershed, Virginia) that can be used to monitor changes relative to the impacts related to climate change in the future; (2) create mathematical expressions to model fish species richness and diversity, and macroinvertebrate taxa and macroinvertebrate functional feeding group taxa richness and diversity that can serve as a baseline for future comparisons in these and other watersheds in the mid-Atlantic region; and (3) heighten people’s awareness, knowledge and understanding of climate change and impacts on watersheds in a laboratory experience and interactive exhibits, through internship opportunities for undergraduate and graduate students, a week-long teacher workshop, and a website about climate change and watersheds. Mathematical expressions modeled fish and macroinvertebrate richness and diversity accurately well during most of the six thermal seasons where sample sizes were robust. Additionally, hydrologic models provide the basis for estimating flows under varying meteorological conditions and landscape changes. Continuations of long-term studies are requisite for accurately teasing local human influences (e.g. urbanization and watershed alteration) from global anthropogenic impacts (e.g. climate change) on watersheds. Effective and skillful translations (e.g. annual potential exposure of 750,000 people to our inquiry-based laboratory activities and interactive exhibits in Virginia) of results of scientific investigations are valuable ways of communicating information to the general public to enhance their understanding of climate change and its effects in watersheds.

  8. Idaho National Laboratory’s Greenhouse Gas FY08 Baseline

    SciTech Connect (OSTI)

    Jennifer D. Morton

    2011-06-01

    A greenhouse gas (GHG) inventory is a systematic attempt to account for the production and release of certain gasses generated by an institution from various emission sources. The gasses of interest are those which have become identified by climate science as related to anthropogenic global climate change. This document presents an inventory of GHGs generated during fiscal year (FY) 2008 by Idaho National Laboratory (INL), a Department of Energy (DOE)-sponsored entity, located in southeastern Idaho. Concern about the environmental impact of GHGs has grown in recent years. This, together with a desire to decrease harmful environmental impacts, would be enough to encourage the calculation of a baseline estimate of total GHGs generated at INL. Additionally, INL has a desire to see how its emissions compare with similar institutions, including other DOE national laboratories. Executive Order 13514 requires that federal agencies and institutions document reductions in GHG emissions in the future, and such documentation will require knowledge of a baseline against which reductions can be measured. INL's FY08 GHG inventory was calculated according to methodologies identified in federal GHG guidance documents using operational control boundaries. It measures emissions generated in three Scopes: (1) INL emissions produced directly by stationary or mobile combustion and by fugitive emissions, (2) the share of emissions generated by entities from which INL purchased electrical power, and (3) indirect or shared emissions generated by outsourced activities that benefit INL (occur outside INL's organizational boundaries but are a consequence of INL's activities). This inventory found that INL generated a total of 113,049 MT of CO2-equivalent emissions during FY08. The following conclusions were made from looking at the results of the individual contributors to INL's baseline GHG inventory: (1) Electricity (including the associated transmission and distribution losses) is the largest contributor to INL's GHG inventory, with over 50% of the CO2e emissions; (2) Other sources with high emissions were stationary combustion (facility fuels), waste disposal (including fugitive emissions from the onsite landfill and contracted disposal), mobile combustion (fleet fuels), employee commuting, and business air travel; and (3) Sources with low emissions were wastewater treatment (onsite and contracted), fugitive emissions from refrigerants, and business ground travel (in personal and rental vehicles). This report details the methods behind quantifying INL's GHG inventory and discusses lessons learned on better practices by which information important to tracking GHGs can be tracked and recorded. It is important to note that because this report differentiates between those portions of INL that are managed and operated by the Battelle Energy Alliance (BEA) and those managed by other contractors, it includes only that large proportion of Laboratory activities overseen by BEA. It is assumed that other contractors will provide similar reporting for those activities they manage, where appropriate.

  9. Idaho National Laboratory’s Greenhouse Gas FY08 Baseline

    SciTech Connect (OSTI)

    Jennifer D. Morton

    2010-09-01

    A greenhouse gas (GHG) inventory is a systematic attempt to account for the production and release of certain gasses generated by an institution from various emission sources. The gasses of interest are those which have become identified by climate science as related to anthropogenic global climate change. This document presents an inventory of GHGs generated during fiscal year (FY) 2008 by Idaho National Laboratory (INL), a Department of Energy (DOE)-sponsored entity, located in southeastern Idaho. Concern about the environmental impact of GHGs has grown in recent years. This, together with a desire to decrease harmful environmental impacts, would be enough to encourage the calculation of a baseline estimate of total GHGs generated at the INL. Additionally, the INL has a desire to see how its emissions compare with similar institutions, including other DOE-sponsored national laboratories. Executive Order 13514 requires that federally-sponsored agencies and institutions document reductions in GHG emissions in the future, and such documentation will require knowledge of a baseline against which reductions can be measured. INL’s FY08 GHG inventory was calculated according to methodologies identified in Federal recommendations and an as-yet-unpublished Technical and Support Document (TSD) using operational control boundary. It measures emissions generated in three Scopes: (1) INL emissions produced directly by stationary or mobile combustion and by fugitive emissions, (2) the share of emissions generated by entities from which INL purchased electrical power, and (3) indirect or shared emissions generated by outsourced activities that benefit INL (occur outside INL’s organizational boundaries but are a consequence of INL’s activities). This inventory found that INL generated a total of 114,256 MT of CO2-equivalent emissions during fiscal year 2008 (FY08). The following conclusions were made from looking at the results of the individual contributors to INL’s baseline GHG inventory: • Electricity is the largest contributor to INL’s GHG inventory, with over 50% of the net anthropogenic CO2e emissions • Other sources with high emissions were stationary combustion, fugitive emissions from the onsite landfill, mobile combustion (fleet fuels) and the employee commute • Sources with low emissions were contracted waste disposal, wastewater treatment (onsite and contracted) and fugitive emissions from refrigerants. This report details the methods behind quantifying INL’s GHG inventory and discusses lessons learned on better practices by which information important to tracking GHGs can be tracked and recorded. It is important to stress that the methodology behind this inventory followed guidelines that have not yet been formally adopted. Thus, some modification of the conclusions may be necessary as additional guidance is received. Further, because this report differentiates between those portions of the INL that are managed and operated by the Battelle Energy Alliance (BEA) and those managed by other contractors, it includes only that large proportion of Laboratory activities overseen by BEA. It is assumed that other contractors will provide similar reporting for those activities they manage, where appropriate.

  10. Vacuum enhanced cutaneous biopsy instrument

    DOE Patents [OSTI]

    Collins, Joseph (St. Petersburg, FL)

    2000-01-01

    A syringe-like disposable cutaneous biopsy instrument equipped with a tubular blade at its lower end, and designed so that a vacuum is created during use, said vacuum serving to retain undeformed a plug of tissue cut from a patient's skin.

  11. Economic Instruments and the Environment

    E-Print Network [OSTI]

    Research and Consulting; Rick McDougall and his staff at the Program Evaluation and Economic Analysis#12;!!! Economic Instruments and the Environment: Selected Legal Issues by Christopher Rolfe Canada funded the research for this publication in order to catalyze discussion on the use of economic

  12. ACRF Instrumentation Status and Information April 2009

    SciTech Connect (OSTI)

    JW Voyles

    2009-05-07

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  13. Pentek metal coating removal system: Baseline report; Greenbook (chapter)

    SciTech Connect (OSTI)

    1997-07-31

    The Pentek coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The Pentek coating removal system consisted of the ROTO-PEEN Scaler, CORNER-CUTTER{reg_sign}, and VAC-PAC{reg_sign}. They are designed to remove coatings from steel, concrete, brick, and wood. The Scaler uses 3M Roto Peen tungsten carbide cutters while the CORNER-CUTTER{reg_sign} uses solid needles for descaling activities. These hand tools are used with the VAC-PAC{reg_sign} vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure minimal, but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

  14. Ultra-high pressure water jet: Baseline report

    SciTech Connect (OSTI)

    1997-07-31

    The ultra-high pressure waterjet technology was being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The ultra-high pressure waterjet technology acts as a cutting tool for the removal of surface substrates. The Husky{trademark} pump feeds water to a lance that directs the high pressure water at the surface to be removed. The safety and health evaluation during the testing demonstration focused on two main areas of exposure. These were dust and noise. The dust exposure was found to be minimal, which would be expected due to the wet environment inherent in the technology, but noise exposure was at a significant level. Further testing for noise is recommended because of the outdoor environment where the testing demonstration took place. In addition, other areas of concern found were arm-hand vibration, ergonomics, heat stress, tripping hazards, electrical hazards, lockout/tagout, fall hazards, slipping hazards, hazards associated with the high pressure water, and hazards associated with air pressure systems.

  15. Pentek concrete scabbling system: Baseline report; Greenbook (chapter)

    SciTech Connect (OSTI)

    1997-07-31

    The Pentek scabbling technology was tested at Florida International University (FIU) and is being evaluated as a baseline technology. This report evaluates it for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The Pentek concrete scabbling system consisted of the MOOSE, SQUIRREL-I, and SQUIRREL-III scabblers. The scabblers are designed to scarify concrete floors and slabs using cross-section, tungsten carbide tipped bits. The bits are designed to remove concrete in 318 inch increments. The bits are either 9-tooth or demolition type. The scabblers are used with a vacuum system designed to collect and filter the concrete dust and contamination that is removed from the surface. The safety and health evaluation conducted during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure was minimal, but noise exposure was significant. Further testing for each of these exposures is recommended. Because of the outdoor environment where the testing demonstration took place, results may be inaccurate. It is feasible that the dust and noise levels will be higher in an enclosed operating environment. Other areas of concern were arm-hand vibration, whole-body vibration, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

  16. LTC vacuum blasting machine (metal) baseline report: Greenbook (chapter)

    SciTech Connect (OSTI)

    1997-07-31

    The LTC coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC coating removal system consisted of several hand tools, a Roto Peen scaler, and a needlegun. They are designed to remove coatings from steel, concrete, brick, and wood. These hand tools are used with the LTC PTC-6 vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. The dust exposure was minimal but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body vibration, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

  17. LTC vacuum blasting maching (concrete): Baseline report: Greenbook (Chapter)

    SciTech Connect (OSTI)

    1997-07-31

    The LTC shot blast technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjuction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC 1073 Vacuum Blasting Machine uses a high-capacity, direct-pressure blasting system which incorporates a continuous feed for the blast media. The blast media cleans the surface within the contained brush area of the blast. It incorporates a vacuum system which removes dust and debris from the surface as it is blasted. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure during maintenance activities was minimal, but due to mechanical difficulties dust monitoring could not be conducted during operation. Noise exposure was significant. Further testing for each of these exposures is recommended because of the outdoor environment where the testing demonstration took place. This may cause the results to be inaccurate. It is feasible that the dust and noise levels will be higher in an enclosed environment. In addition, other safety and health issues found were ergonomics, heat stress, tripping hazards, electrical hazards, lockout/tagout, and arm-hand vibration.

  18. A SURVEY OF ASTRONOMICAL RESEARCH: A BASELINE FOR ASTRONOMICAL DEVELOPMENT

    SciTech Connect (OSTI)

    Ribeiro, V. A. R. M.; Russo, P.; Cárdenas-Avendańo, A. E-mail: russo@strw.leidenuniv.nl

    2013-12-01

    Measuring scientific development is a difficult task. Different metrics have been put forward to evaluate scientific development; in this paper we explore a metric that uses the number of peer-reviewed, and when available non-peer-reviewed, research articles as an indicator of development in the field of astronomy. We analyzed the available publication record, using the Smithsonian Astrophysical Observatory/NASA Astrophysics Database System, by country affiliation in the time span between 1950 and 2011 for countries with a gross national income of less than 14,365 USD in 2010. This represents 149 countries. We propose that this metric identifies countries in ''astronomical development'' with a culture of research publishing. We also propose that for a country to develop in astronomy, it should invest in outside expert visits, send its staff abroad to study, and establish a culture of scientific publishing. Furthermore, we propose that this paper may be used as a baseline to measure the success of major international projects, such as the International Year of Astronomy 2009.

  19. Fort Irwin Integrated Resource Assessment. Volume 2, Baseline detail

    SciTech Connect (OSTI)

    Richman, E.E.; Keller, J.M.; Dittmer, A.L.; Hadley, D.L.

    1994-01-01

    This report documents the assessment of baseline energy use at Fort Irwin, a US Army Forces Command facility near Barstow, California. It is a companion report to Volume 1, Executive Summary, and Volume 3, Integrated Resource Assessment. The US Army Forces Command (FORSCOM) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Fort Irwin. This is part of a model program that PNL has designed to support energy-use decisions in the federal sector. This program (1) identifies and evaluates all cost-effective energy projects; (2) develops a schedule at each installation for project acquisition considering project type, size, timing, and capital requirements, as well as energy and dollar savings; and (3) targets 100% of the financing required to implement energy efficiency projects. PNL applied this model program to Fort Irwin. This analysis examines the characteristics of electric, propane gas, and vehicle fuel use for a typical operating year. It records energy-use intensities for the facilities at Fort Irwin by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A complete energy consumption reconciliation is presented that accounts for all energy use among buildings, utilities, and applicable losses.

  20. A multiple baseline investigation of Conjoint Behavioral Consultation (CBC) facilitated by a pediatric mental health consultant

    E-Print Network [OSTI]

    Bellinger, Skylar Ayn

    2011-07-28

    . Overview of Procedures 49 2. Timeline for Families Participating in Multiple Baseline Design 60 3. Dependent Variables and Corresponding Measures 61 4. CR Pre and Post Intervention BASC-2 Scores 113 5. DW Pre and Post Intervention BASC-2 Scores... Figure Page Figure 1. Baseline and intervention home routine compliance for all 3 participants. 89 Figure 2. Baseline and intervention school routine compliance for all 3 participants. 95 Figure 3. CR parent GAS ratings. 102 Figure 4. CR teacher GAS...

  1. DOE Announces Webinars on the Mid-Atlantic Baseline Study, EPA...

    Energy Savers [EERE]

    Baseline Studies (MABS), a project intended to help inform the siting and permitting of offshore wind facilities, and will also present some of the key findings, including the...

  2. Statistical Analysis of Baseline Load Models for Non-Residential Buildings

    E-Print Network [OSTI]

    Coughlin, Katie

    2012-01-01

    M. Potter, The Demand Response Baseline, v.1.75, EnerNOC OPSand Techniques for Demand Response, Lawrence BerkeleyS. Kilicotte, Estimating Demand Response Load Impacts:

  3. U.S. Baseline Briefing Book Projections for Agricultural and Biofuel Markets

    E-Print Network [OSTI]

    Noble, James S.

    U.S. Baseline Briefing Book Projections for Agricultural and Biofuel, biofuel, government cost and farm income projections in this report were prepared by the team at FAPRIMU

  4. Baseline System Costs for 50.0 MW Enhanced Geothermal System...

    Open Energy Info (EERE)

    Baseline System Costs for 50.0 MW Enhanced Geothermal System -- A Function of: Working Fluid, Technology, and Location Geothermal Project Jump to: navigation, search Last modified...

  5. Uses of automated geotechnical instrumentation systems

    SciTech Connect (OSTI)

    Marr, W.A.

    1999-07-01

    Developments occurring in electronics and instrumentation promise to lower the cost and improve the reliability of electronic systems to monitor geotechnical instrumentation. The miniaturization of electronics, reduction of power consumption, reduced component cost, and improved component reliability all help to make new instruments possible and geotechnical instrumentation more cost effective. This paper describes the application of some of these developments to three problems and summarizes the potential benefits to the engineer from their use. The increased capabilities of instrumentation and data acquisition equipment combined with their improved reliability and lower cost will make future applications of geotechnical instrumentation more cost effective. One application described is ground water monitoring.

  6. India's baseline plan for nuclear energy self-sufficiency.

    SciTech Connect (OSTI)

    Bucher, R .G.; Nuclear Engineering Division

    2009-01-01

    India's nuclear energy strategy has traditionally strived for energy self-sufficiency, driven largely by necessity following trade restrictions imposed by the Nuclear Suppliers Group (NSG) following India's 'peaceful nuclear explosion' of 1974. On September 6, 2008, the NSG agreed to create an exception opening nuclear trade with India, which may create opportunities for India to modify its baseline strategy. The purpose of this document is to describe India's 'baseline plan,' which was developed under constrained trade conditions, as a basis for understanding changes in India's path as a result of the opening of nuclear commerce. Note that this treatise is based upon publicly available information. No attempt is made to judge whether India can meet specified goals either in scope or schedule. In fact, the reader is warned a priori that India's delivery of stated goals has often fallen short or taken a significantly longer period to accomplish. It has been evident since the early days of nuclear power that India's natural resources would determine the direction of its civil nuclear power program. It's modest uranium but vast thorium reserves dictated that the country's primary objective would be thorium utilization. Estimates of India's natural deposits vary appreciably, but its uranium reserves are known to be extremely limited, totaling approximately 80,000 tons, on the order of 1% of the world's deposits; and nominally one-third of this ore is of very low uranium concentration. However, India's roughly 300,000 tons of thorium reserves account for approximately 30% of the world's total. Confronted with this reality, the future of India's nuclear power industry is strongly dependent on the development of a thorium-based nuclear fuel cycle as the only way to insure a stable, sustainable, and autonomous program. The path to India's nuclear energy self-sufficiency was first outlined in a seminal paper by Drs. H. J. Bhabha and N. B. Prasad presented at the Second United Nations Conference on the Peaceful Uses of Atomic Energy in 1958. The paper described a three stage plan for a sustainable nuclear energy program consistent with India's limited uranium but abundant thorium natural resources. In the first stage, natural uranium would be used to fuel graphite or heavy water moderated reactors. Plutonium extracted from the spent fuel of these thermal reactors would drive fast reactors in the second stage that would contain thorium blankets for breeding uranium-233 (U-233). In the final stage, this U-233 would fuel thorium burning reactors that would breed and fission U-233 in situ. This three stage blueprint still reigns as the core of India's civil nuclear power program. India's progress in the development of nuclear power, however, has been impacted by its isolation from the international nuclear community for its development of nuclear weapons and consequent refusal to sign the Nuclear Nonproliferation Treaty (NPT). Initially, India was engaged in numerous cooperative research programs with foreign countries; for example, under the 'Atoms for Peace' program, India acquired the Cirus reactor, a 40 MWt research reactor from Canada moderated with heavy water from the United States. India was also actively engaged in negotiations for the NPT. But, on May 18, 1974, India conducted a 'peaceful nuclear explosion' at Pokharan using plutonium produced by the Cirus reactor, abruptly ending the era of international collaboration. India then refused to sign the NPT, which it viewed as discriminatory since it would be required to join as a non-nuclear weapons state. As a result of India's actions, the Nuclear Suppliers Group (NSG) was created in 1975 to establish guidelines 'to apply to nuclear transfers for peaceful purposes to help ensure that such transfers would not be diverted to unsafeguarded nuclear fuel cycle or nuclear explosive activities. These nuclear export controls have forced India to be largely self-sufficient in all nuclear-related technologies.

  7. Hidden photon measurements using the long-baseline cavity of laser interferometric gravitational-wave detector

    E-Print Network [OSTI]

    Yuki Inoue; Koji Ishidoshiro

    2015-09-28

    We suggest a new application for the long-baseline and high powered cavities in a laser-interferometric gravitational-wave~(GW) detector to search for WISPs (weakly interacting sub-eV particles), such as a hidden U(1) gauge boson, called the hidden-sector photon. It is based on the principle of a light shining through the wall experiment, adapted to the laser with a wavelength of 1064 or 532 nm. The transition edge sensor (TES) bolometer is assumed as a detector, which the dark rate and efficiency are assumed as $0.000001~\\mathrm{s^{-1}}$ and 0.75, respectively. The TES bolometer is sufficiently sensitive to search for the low-mass hidden-sector photons. We assume that the reconversion cavity is mounted on the reconversion region of hidden-sector photons, which number of reflection and length are assumed as 1000 and 10, 100, and 1000m. We found that the second-point-five and the second generation GW experiments, such as KAGRA and Advanced LIGO with a regeneration cavity and TES bolometers. The expected lower bounds with these experiments wit the reconverted mirror are set on the coupling constant $\\chi = 2 \\times 10^{-9}$ for hidden-sector photon with a mass of $2 \\times 10^{-5}$ eV within 95% confidence level. The third generation detector, Einstein Telescope, will reach $\\chi = 1 \\times 10^{-9}$ at a mass of $1 \\times 10^{-5}$ eV within 95% confidence level. Although the operation and construction of the RC will demand dedicated optical configurations, the cavities used in GW detection are expected to measure the strong potential for finding the hidden-sector photons.

  8. Long-Term Stewardship Baseline Report and Transition Guidance

    SciTech Connect (OSTI)

    Kristofferson, Keith

    2001-11-01

    Long-term stewardship consists of those actions necessary to maintain and demonstrate continued protection of human health and the environment after facility cleanup is complete. As the Department of Energy’s (DOE) lead laboratory for environmental management programs, the Idaho National Engineering and Environmental Laboratory (INEEL) administers DOE’s long-term stewardship science and technology efforts. The INEEL provides DOE with technical, and scientific expertise needed to oversee its long-term environmental management obligations complexwide. Long-term stewardship is administered and overseen by the Environmental Management Office of Science and Technology. The INEEL Long-Term Stewardship Program is currently developing the management structures and plans to complete INEEL-specific, long-term stewardship obligations. This guidance document (1) assists in ensuring that the program leads transition planning for the INEEL with respect to facility and site areas and (2) describes the classes and types of criteria and data required to initiate transition for areas and sites where the facility mission has ended and cleanup is complete. Additionally, this document summarizes current information on INEEL facilities, structures, and release sites likely to enter long-term stewardship at the completion of DOE’s cleanup mission. This document is not intended to function as a discrete checklist or local procedure to determine readiness to transition. It is an overarching document meant as guidance in implementing specific transition procedures. Several documents formed the foundation upon which this guidance was developed. Principal among these documents was the Long-Term Stewardship Draft Technical Baseline; A Report to Congress on Long-Term Stewardship, Volumes I and II; Infrastructure Long-Range Plan; Comprehensive Facility Land Use Plan; INEEL End-State Plan; and INEEL Institutional Plan.

  9. The COMPTEL instrumental line background

    E-Print Network [OSTI]

    G. Weidenspointner; M. Varendorff; U. Oberlack; D. Morris; S. Plueschke; R. Diehl; S. C. Kappadath; M. McConnell; J. Ryan; V. Schoenfelder; H. Steinle

    2000-12-14

    The instrumental line background of the Compton telescope COMPTEL onboard the Compton Gamma-Ray Observatory is due to the activation and/or decay of many isotopes. The major components of this background can be attributed to eight individual isotopes, namely 2D, 22Na, 24Na, 28Al, 40K, 52Mn, 57Ni, and 208Tl. The identification of instrumental lines with specific isotopes is based on the line energies as well as on the variation of the event rate with time, cosmic-ray intensity, and deposited radiation dose during passages through the South-Atlantic Anomaly. The characteristic variation of the event rate due to a specific isotope depends on its life-time, orbital parameters such as the altitude of the satellite above Earth, and the solar cycle. A detailed understanding of the background contributions from instrumental lines is crucial at MeV energies for measuring the cosmic diffuse gamma-ray background and for observing gamma-ray line emission in the interstellar medium or from supernovae and their remnants. Procedures to determine the event rate from each background isotope are described, and their average activity in spacecraft materials over the first seven years of the mission is estimated.

  10. RSSC RADIATION DETECTORS & SURVEY INSTRUMENTS 8/99 4-1 RADIATION DETECTORS AND SURVEY INSTRUMENTS

    E-Print Network [OSTI]

    Slatton, Clint

    RSSC RADIATION DETECTORS & SURVEY INSTRUMENTS 8/99 4-1 CHAPTER 4 RADIATION DETECTORS AND SURVEY........................................................................................................... 4-3 II. Use of Radiation Survey Instruments

  11. The Outreach & Engagement Measurement Instrument (OEMI)

    E-Print Network [OSTI]

    The Outreach & Engagement Measurement Instrument (OEMI) Burton A. Bargerstock Director, UOE reporting system ­ Challenges · Continuous refinement of the instrument ­ Balance desire for increasing data ­ Demonstration system with guest accounts available The OEMI today (contd.) #12;· Increase number of OEMI

  12. X-Ray Nanoimaging: Instruments and Methods

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Instruments and Methods X-Ray Nanoimaging: Instruments and Methods Print To be held as part of SPIE. http:spie.orgOP318 August 28-29, 2013; San Diego, California, USA...

  13. U.S. Biofuels Baseline and Impact of E-15 Expansion on Biofuel Markets

    E-Print Network [OSTI]

    Noble, James S.

    May 2012 U.S. Biofuels Baseline and Impact of E-15 Expansion on Biofuel Markets FAPRI-MU Report #02 for agricultural and biofuel markets.1 That baseline assumes current biofuel policy, including provisions credit expired, as scheduled, at the end of 2011. The additional tax credit for cellulosic biofuel

  14. FAPRI-MU Biofuel Baseline FAPRI-MU Report #02-13

    E-Print Network [OSTI]

    Noble, James S.

    FAPRI-MU Biofuel Baseline March 2013 FAPRI-MU Report #02-13 Providing objective analysis for more of Education, Office of Civil Rights. #12;1 Executive Summary This report takes a closer look at the biofuels portion of the U.S. Agricultural and Biofuels Baseline released by the Food and Agricultural Policy

  15. Multi-Project Baselines for Evaluation of Industrial Energy-Efficiency and Electric Power Projects

    E-Print Network [OSTI]

    2001-01-01

    Africa compared to the sector-wide baseline Best Plant 10th Percentile Project #5 - off-grid solar Project #Africa compared to the all-fossil baseline Best Plant 10th Percentile 25th Percentile Project #5 - off-grid solar Weighted Average Project #

  16. 47 OTHER INSTRUMENTATION; VALVES; ACTUATORS; MINIATURIZATION...

    Office of Scientific and Technical Information (OSTI)

    characterization of active MEMS valves. Barnard, Casey Anderson 47 OTHER INSTRUMENTATION; VALVES; ACTUATORS; MINIATURIZATION; MICROELECTRONICS; PERFORMANCE TESTING; OPERATION;...

  17. COACHE Faculty Job Satisfaction Survey SURVEY INSTRUMENT

    E-Print Network [OSTI]

    Johnson Jr.,, Ray

    2011-2012 Survey Instrument Theme Benchmark Question Responses Historic Data Available EligibleCOACHE Faculty Job Satisfaction Survey SURVEY INSTRUMENT 2011-12 © 2011 President & Fellows in Higher Education Faculty Job Satisfaction Survey 2011-2012 Survey Instrument Theme Benchmark Question

  18. The Link Foundation Ocean Engineering and Instrumentation

    E-Print Network [OSTI]

    Virginia Tech

    and ocean instrumentation. Application Available online at www.linkoe.org or write to/email: Forms and DrThe Link Foundation Ocean Engineering and Instrumentation Ph.D. Fellowship Program Objectives: To foster ocean engineering and ocean instrumentation research; to enhance both the theoretical

  19. Instrumenting Buildings to Determine Retrofit Savings: Murphy's Law Revisited 

    E-Print Network [OSTI]

    Boecker, C. L.; Bohmer, C.; O'Neal, D. L.; Bryant, J.

    1993-01-01

    BUILDINGS TO DETERMINE RETROFIT SAVINGS: MURPHY'S LAW REVISITED Dennis L. O'Neal, John Bryant, Curtis Boecker, and Chuck Bohmer Department of Mechanical Engineering, Texas A&M University, College Station, TX ABSTRACT Experiences with instrumentation..., installation and maintenance of building energy metering systems are presented. The building energy metering is installed to support the Texas LoanSTAR program in sites throughout the State of Texas. Metering typically includes monitoring the whole building...

  20. Integrated Baseline System (IBS), Version 1.03. User guide: Chemical Stockpile Emergency Preparedness Program

    SciTech Connect (OSTI)

    Bailey, B.M.; Burford, M.J.; Downing, T.R.; Matsumoto, S.W.; Schrank, E.E.; Williams, J.R.; Winters, C.

    1993-01-01

    The Integrated Baseline System (IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planing and analysis. This document is the user guide for the IBS and explains how to operate the IBS system. The fundamental function of the IBS is to provide tools that civilian emergency management personnel can use in developing emergency plans and in supporting emergency management activities to cope with a chemical-releasing event at a military chemical stockpile. Emergency management planners can evaluate concepts and ideas using the IBS system. The results of that experience can then be factored into refining requirements and plans. This document provides information for the general system user, and is the primary reference for the system features of the IBS. It is designed for persons who are familiar with general emergency management concepts, operations, and vocabulary. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other LBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary. IBS is a dynamic system. Its capabilities are in a state of continuing expansion and enhancement.

  1. Integrated Baseline System (IBS), Version 1. 03. [Chemical Stockpile Emergency Preparedness Program

    SciTech Connect (OSTI)

    Bailey, B.M.; Burford, M.J.; Downing, T.R.; Matsumoto, S.W.; Schrank, E.E.; Williams, J.R.; Winters, C.

    1993-01-01

    The Integrated Baseline System (IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planing and analysis. This document is the user guide for the IBS and explains how to operate the IBS system. The fundamental function of the IBS is to provide tools that civilian emergency management personnel can use in developing emergency plans and in supporting emergency management activities to cope with a chemical-releasing event at a military chemical stockpile. Emergency management planners can evaluate concepts and ideas using the IBS system. The results of that experience can then be factored into refining requirements and plans. This document provides information for the general system user, and is the primary reference for the system features of the IBS. It is designed for persons who are familiar with general emergency management concepts, operations, and vocabulary. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other LBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary. IBS is a dynamic system. Its capabilities are in a state of continuing expansion and enhancement.

  2. Tevatron instrumentation: boosting collider performance

    SciTech Connect (OSTI)

    Shiltsev, Vladimir; Jansson, Andreas; Moore, Ronald; /Fermilab

    2006-05-01

    The Tevatron in Collider Run II (2001-present) is operating with six times more bunches, many times higher beam intensities and luminosities than in Run I (1992-1995). Beam diagnostics were crucial for the machine start-up and the never-ending luminosity upgrade campaign. We present the overall picture of the Tevatron diagnostics development for Run II, outline machine needs for new instrumentation, present several notable examples that led to Tevatron performance improvements, and discuss the lessons for the next big machines--LHC and ILC.

  3. Curtis Instruments | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePower VenturesInformation9) Wind Farm Jump to:Cupertino,EnergyInstruments

  4. Detection and quantification system for monitoring instruments

    DOE Patents [OSTI]

    Dzenitis, John M. (Danville, CA); Hertzog, Claudia K. (Houston, TX); Makarewicz, Anthony J. (Livermore, CA); Henderer, Bruce D. (Livermore, CA); Riot, Vincent J. (Oakland, CA)

    2008-08-12

    A method of detecting real events by obtaining a set of recent signal results, calculating measures of the noise or variation based on the set of recent signal results, calculating an expected baseline value based on the set of recent signal results, determining sample deviation, calculating an allowable deviation by multiplying the sample deviation by a threshold factor, setting an alarm threshold from the baseline value plus or minus the allowable deviation, and determining whether the signal results exceed the alarm threshold.

  5. Coherent electron cooling proof of principle instrumentation design

    SciTech Connect (OSTI)

    Gassner D. M.; Litvinenko, V.; Michnoff, R.; Miller, T.; Minty, M.; Pinayev, I.

    2012-04-15

    The goal of the Coherent Electron Cooling Proof-of-Principle (CeC PoP) experiment being designed at RHIC is to demonstrate longitudinal (energy spread) cooling before the expected CD-2 for eRHIC. The scope of the experiment is to longitudinally cool a single bunch of 40 GeV/u gold ions in RHIC. This paper will describe the instrumentation systems proposed to meet the diagnostics challenges. These include measurements of beam intensity, emittance, energy spread, bunch length, position, orbit stability, and transverse and temporal alignment of electron and ion beams.

  6. Short-baseline electron neutrino disappearance, tritium beta decay, and neutrinoless double-beta decay

    SciTech Connect (OSTI)

    Giunti, Carlo; Laveder, Marco [INFN, Sezione di Torino, Via P. Giuria 1, I-10125 Torino (Italy); Dipartimento di Fisica G. Galilei, Universita di Padova, and INFN, Sezione di Padova, Via F. Marzolo 8, I-35131 Padova (Italy)

    2010-09-01

    We consider the interpretation of the MiniBooNE low-energy anomaly and the gallium radioactive source experiments anomaly in terms of short-baseline electron neutrino disappearance in the framework of 3+1 four-neutrino mixing schemes. The separate fits of MiniBooNE and gallium data are highly compatible, with close best-fit values of the effective oscillation parameters {Delta}m{sup 2} and sin{sup 2}2{theta}. The combined fit gives {Delta}m{sup 2}(greater-or-similar sign)0.1 eV{sup 2} and 0.11(less-or-similar sign)sin{sup 2}2{theta}(less-or-similar sign)0.48 at 2{sigma}. We consider also the data of the Bugey and Chooz reactor antineutrino oscillation experiments and the limits on the effective electron antineutrino mass in {beta} decay obtained in the Mainz and Troitsk tritium experiments. The fit of the data of these experiments limits the value of sin{sup 2}2{theta} below 0.10 at 2{sigma}. Considering the tension between the neutrino MiniBooNE and gallium data and the antineutrino reactor and tritium data as a statistical fluctuation, we perform a combined fit which gives {Delta}m{sup 2}{approx_equal}2 eV and 0.01(less-or-similar sign)sin{sup 2}2{theta}(less-or-similar sign)0.13 at 2{sigma}. Assuming a hierarchy of masses m{sub 1}, m{sub 2}, m{sub 3}<

  7. Soot Particle Studies - Instrument Inter-Comparison – Project Overview

    SciTech Connect (OSTI)

    Cross, E.; Sedlacek, A.; Onasch, T. B.; Ahern, A.; Wrobel, W.; Slowik, J. G.; Olfert, J.; Lack, D. A.; Massoli, P.; Cappa, C. D.; Schwarz, J.; Spackman, J. R.; Fahey, D. W.; Trimborn, A.; Jayne, J. T.; Freedman, A.; Williams, L. R.; Ng, N. L.; Mazzoleni, C.; Dubey, M.; Brem, B.; Kok, G.; Subramanian, R.; Freitag, S.; Clarke, A.; Thornhill, D.; Marr, L.; Kolb, C. E.; Worsnop, D. R.; Davidovits, P.

    2010-03-06

    An inter-comparison study of instruments designed to measure the microphysical and optical properties of soot particles was completed. The following mass-based instruments were tested: Couette Centrifugal Particle Mass Analyzer (CPMA), Time-of-Flight Aerosol Mass Spectrometer - Scanning Mobility Particle Sizer (AMS-SMPS), Single Particle Soot Photometer (SP2), Soot Particle-Aerosol Mass Spectrometer (SP-AMS) and Photoelectric Aerosol Sensor (PAS2000CE). Optical instruments measured absorption (photoacoustic, interferometric, and filter-based), scattering (in situ), and extinction (light attenuation within an optical cavity). The study covered an experimental matrix consisting of 318 runs that systematically tested the performance of instruments across a range of parameters including: fuel equivalence ratio (1.8 {le} {phi} {le} 5), particle shape (mass-mobility exponent (D{sub f m}), 2.0 {le} D{sub f m} {le} 3.0), particle mobility size (30 {le} d{sub m} {le} 300 nm), black carbon mass (0.07 {le} m{sub BC} {le} 4.2 fg) and particle chemical composition. In selected runs, particles were coated with sulfuric acid or dioctyl sebacate (DOS) (0.5 {le} {Delta}r{sub ve} {le} 201 nm) where {Delta}r{sub ve} is the change in the volume equivalent radius due to the coating material. The effect of non-absorbing coatings on instrument response was determined. Changes in the morphology of fractal soot particles were monitored during coating and denuding processes and the effect of particle shape on instrument response was determined. The combination of optical and mass based measurements was used to determine the mass specific absorption coefficient for denuded soot particles. The single scattering albedo of the particles was also measured. An overview of the experiments and sample results are presented.

  8. GTA (ground test accelerator) Phase 1: Baseline design report

    SciTech Connect (OSTI)

    Not Available

    1986-08-01

    The national Neutral Particle Beam (NPB) program has two objectives: to provide the necessary basis for a discriminator/weapon decision by 1992, and to develop the technology in stages that lead ultimately to a neutral particle beam weapon. The ground test accelerator (GTA) is the test bed that permits the advancement of the state-of-the-art under experimental conditions in an integrated automated system mode. An intermediate goal of the GTA program is to support the Integrated Space Experiments, while the ultimate goal is to support the 1992 decision. The GTA system and each of its major subsystems are described, and project schedules and resource requirements are provided. (LEW)

  9. Report of the first United States conference on utility experience with neutron noise analysis

    SciTech Connect (OSTI)

    Fry, D.N.; Horne, G.P.; Mayo, C.W.

    1984-01-01

    An informal meeting was held in Washington, D.C. on April 3 and 4, 1984, to discuss the current state of the art and experiences with neutron noise analysis in US pressurized water reactors (PWRs). The meeting was attended by 33 persons representing 11 utilities and 3 PWR reactor vendors as well as consultants, universities, and research laboratories. Presentations at the meeting covered several applications of neutron noise for diagnosing such things as vibrations induced by baffle jetting, detection of mechanical degradation of thermal shield supports, and electrical degradation of nuclear instrumentation channels. Twenty-one responses were obtained from a questionnaire circulated to all participants requesting their viewpoints and experiences regarding neutron noise analysis. The meeting participants concluded that a working group on neutron noise analysis should be formed to (1) establish a baseline library of neutron noise data, (2) provide a forum for communicating experiences with neutron noise surveillance, and (3) develop good practices and quality assurance procedures for neutron noise measurement and interpretation.

  10. Low No{sub x}/SO{sub x} burner retrofit for utility cyclone boilers. Baseline test report: Issue A

    SciTech Connect (OSTI)

    Moore, K.; Martin, L.; Smith, J.

    1991-05-01

    The Low NO{sub x}/SO{sub x} (LNS) Burner Retrofit for Utility Cyclone Boilers program consists of the retrofit and subsequent demonstration of the technology at Southern Illinois Power Cooperative`s (SIPC`s) 33-MW unit 1 cyclone boiler located near Marion, Illinois. The LNS Burner employs a simple innovative combustion process burning high-sulfur Illinois coal to provide substantial SO{sub 2} and NO{sub x} control within the burner. A complete series of boiler performance and characterization tests, called the baseline tests, was conducted in October 1990 on unit 1 of SIPC`s Marion Station. The primary objective of the baseline test was to collect data from the existing plant that could provide a comparison of performance after the LNS Burner retrofit. These data could confirm the LNS Burner`s SO{sub x} and NO{sub x} emissions control and any effect on boiler operation. Further, these tests would provide to the project experience with the operating characteristics of the host unit as well as engineering design information to minimize technical uncertainties in the application of the LNS Burner technology.

  11. Assessing health impacts in complex eco-epidemiological settings in the humid tropics: Modular baseline health surveys

    SciTech Connect (OSTI)

    Winkler, Mirko S.; Divall, Mark J.; Krieger, Gary R.; Schmidlin, Sandro; Magassouba, Mohamed L.; Knoblauch, Astrid M.; Singer, Burton H.; Utzinger, Juerg

    2012-02-15

    The quantitative assessment of health impacts has been identified as a crucial feature for realising the full potential of health impact assessment (HIA). In settings where demographic and health data are notoriously scarce, but there is a broad range of ascertainable ecological, environmental, epidemiological and socioeconomic information, a diverse toolkit of data collection strategies becomes relevant for the mainly small-area impacts of interest. We present a modular, cross-sectional baseline health survey study design, which has been developed for HIA of industrial development projects in the humid tropics. The modular nature of our toolkit allows our methodology to be readily adapted to the prevailing eco-epidemiological characteristics of a given project setting. Central to our design is a broad set of key performance indicators, covering a multiplicity of health outcomes and determinants at different levels and scales. We present experience and key findings from our modular baseline health survey methodology employed in 14 selected sentinel sites within an iron ore mining project in the Republic of Guinea. We argue that our methodology is a generic example of rapid evidence assembly in difficult-to-reach localities, where improvement of the predictive validity of the assessment and establishment of a benchmark for longitudinal monitoring of project impacts and mitigation efforts is needed.

  12. Characterization of Instrumental Phase Stability

    E-Print Network [OSTI]

    D. Y. Kubo; T. R. Hunter; R. D. Christensen; P. I. Yamaguchi

    2007-04-17

    Atmospheric water vapor causes significant undesired phase fluctuations for the Submillimeter Array (SMA) interferometer, particularly in its highest frequency observing band of 690 GHz. One proposed solution to this atmospheric effect is to observe simultaneously at two separate frequency bands of 230 and 690 GHz. Although the phase fluctuations have a smaller magnitude at the lower frequency, they can be measured more accurately and on shorter timescales due to the greater sensitivity of the array to celestial point source calibrators at this frequency. In theory, we can measure the atmospheric phase fluctuations in the 230 GHz band, scale them appropriately with frequency, and apply them to the data in 690 band during the post-observation calibration process. The ultimate limit to this atmospheric phase calibration scheme will be set by the instrumental phase stability of the IF and LO systems. We describe the methodology and initial results of the phase stability characterization of the IF and LO systems.

  13. MC and A instrumentation catalog

    SciTech Connect (OSTI)

    Neymotin, L.; Sviridova, V.

    1998-06-01

    In 1981 and 1985, two editions of a catalog of non-destructive nuclear measurement instrumentation, and material control and surveillance equipment, were published by Brookhaven National Laboratory (BNL). The last edition of the catalog included one hundred and twenty-five entries covering a wide range of devices developed in the US and abroad. More than ten years have elapsed since the publication of the more recent Catalog. Devices described in it have undergone significant modifications, and new devices have been developed. Therefore, in order to assist specialists in the field of Material Control and Accounting (MC and A), a new catalog has been created. Work on this instrumentation catalog started in 1997 as a cooperative effort of Brookhaven National Laboratory (BNL), operated by Brookhaven Science Associates under contract to the US Department of Energy, and the All-Russian Research Institute of Automatics (VNIIA), subordinate institute of the Atomic Energy Ministry of the Russian Federation, within the collaborative US-Russia Material Protection, Control, and Accounting (MPC and A) Program. Most of the equipment included in the Catalog are non-destructive assay (NDA) measurement devices employed for purposes of accounting, confirmation, and verification of nuclear materials. Other devices also included in the Catalog are employed in the detection and deterrence of unauthorized access to or removal of nuclear materials (material control: containment and surveillance). Equipment found in the Catalog comprises either: (1) complete devices or systems that can be used for MC and A applications; or (2) parts or components of complete systems, such as multi-channel analyzers, detectors, neutron generators, and software. All devices are categorized by their status of development--from prototype to serial production.

  14. Instrumentation and Controls Division progress report, September 1, 1980-July 1, 1982

    SciTech Connect (OSTI)

    Klobe, L.E.E.

    1982-12-01

    Activities are reported by the Reactor Systems Section, Research Instrument Section, and the Measurement and Controls Engineering Section. Reactor system activities include dynamic analysis, survillanc and diagnostic methods, design and evaluation, detectors, facilities support, process instrumentation development, and special assignments. Activities in the Research Instrument Section include the Navy-ORNL RADIAC development program, advanced ..gamma.. and x ray detector systems, neutron detection and subcriticality measurements, circuit development, position-sensitive detectors, stand-alone computers, environmental monitoring-detectors and systems, plant security, engineering support for fusion energy division, engineering support for accelerator physics, and communications: radio, closed-circuit tv, and computer. Activities in the Measurement and Controls Engineering Section include the AVLIS program; gas centrifuge enrichment technology support; Advanced Instrumentation for Reflood Studies (AIDRS) program; instrumentation development support for fuel reprocessing; in-core experiments and reactor systems; energy, conservation, and electric power systems; computer systems; measurements research; and fossil energy studies Publications are listed. (WHK)

  15. INSTRUMENTATION OF VIDEO GAME SOFTWARE TO SUPPORT AUTOMATED CONTENT ANALYSES

    E-Print Network [OSTI]

    Katchabaw, Michael James

    INSTRUMENTATION OF VIDEO GAME SOFTWARE TO SUPPORT AUTOMATED CONTENT ANALYSES T. Bullen and M, automated content analysis, software instrumentation, Unreal Engine. ABSTRACT Content analysis of video content analyses for video games through the use of software instrumentation. By properly instrumenting

  16. Determination of Baselines for Evaluation and Promotion of Energy Efficiency in Wastewater Treatment Facilities 

    E-Print Network [OSTI]

    Chow, S. A.; Ganji, A. R.; Fok, S.

    2009-01-01

    efficient technologies is crucial in reducing national energy consumption. A detailed understanding of the current industry standards (baselines) is needed to estimate the energy savings potential for advanced state-of-the-art technologies and to provide...

  17. 2008 CHP Baseline Assessment and Action Plan for the Hawaii Market

    Broader source: Energy.gov [DOE]

    Report providing an updated baseline assessment and action plan for combined heat and power (CHP) in Hawaii and to identify the hurdles that prevent the expanded use of CHP systems.

  18. An evaluation of baseline conditions at lease tract C-a, Rio Blanco County, Colorado

    SciTech Connect (OSTI)

    Barteaux, W.L.; Biezugbe, G.

    1987-09-01

    An analysis was made of baseline groundwater quality data from oil shale lease tract C-a, managed by Rio Blanco Oil Shale Company. The data are limited in several respects. All conclusions drawn from the data must be qualified with these limitations. Baseline conditions were determined by analyzing data from wells in the upper bedrock and lower bedrock aquifers and from the alluvial wells. Baseline data were considered all data collected before mining operations began. The water quality was then evaluated using the 1987 Colorado State Basic Standards for Ground Water as a basis. The maximum baseline values for several parameters in each aquifer exceed the standard values. The quality of the upper lower bedrock aquifers varies from region to region within the site. Data on the lower bedrock aquifer are insufficient for speculation on the cause of the variations. Variations in the upper bedrock aquifer are possibly caused by leakage of the lower bedrock aquifer. 16 refs., 9 figs., 9 tabs.

  19. RELATIVE ASTROMETRY OF COMPACT FLARING STRUCTURES IN Sgr A* WITH POLARIMETRIC VERY LONG BASELINE INTERFEROMETRY

    E-Print Network [OSTI]

    Johnson, Michael D.

    We demonstrate that polarimetric interferometry can be used to extract precise spatial information about compact polarized flares of Sgr A*. We show that, for a faint dynamical component, a single interferometric baseline ...

  20. 2008 CHP Baseline Assessment and Action Plan for the California Market

    Office of Energy Efficiency and Renewable Energy (EERE)

    Report providing an updated baseline assessment and action plan for combined heat and power (CHP) in California and to identify the hurdles that prevent the expanded use of CHP system

  1. The radioactive Substances (Testing Instruments) Exemption Order 1962 

    E-Print Network [OSTI]

    Keith, Joseph

    1962-01-01

    STATUTORY INSTRUMENTS 1962 No. 2643 ATOMIC ENERGY AND RADIOACTIVE SUBSTANCES The Radioactive Substances (Testing Instruments) Exemption Order 1962

  2. DETECTION OF FAST RADIO TRANSIENTS WITH MULTIPLE STATIONS: A CASE STUDY USING THE VERY LONG BASELINE ARRAY

    SciTech Connect (OSTI)

    Thompson, David R.; Wagstaff, Kiri L.; Majid, Walid A.; Brisken, Walter F.; Deller, Adam T.; Tingay, Steven J.; Wayth, Randall B.

    2011-07-10

    Recent investigations reveal an important new class of transient radio phenomena that occur on submillisecond timescales. Often, transient surveys' data volumes are too large to archive exhaustively. Instead, an online automatic system must excise impulsive interference and detect candidate events in real time. This work presents a case study using data from multiple geographically distributed stations to perform simultaneous interference excision and transient detection. We present several algorithms that incorporate dedispersed data from multiple sites, and report experiments with a commensal real-time transient detection system on the Very Long Baseline Array. We test the system using observations of pulsar B0329+54. The multiple-station algorithms enhanced sensitivity for detection of individual pulses. These strategies could improve detection performance for a future generation of geographically distributed arrays such as the Australian Square Kilometre Array Pathfinder and the Square Kilometre Array.

  3. Application of ECH to the study of transport in ITER baseline scenario-like discharges in DIII-D

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Pinsker, R. I.; Austin, M. E.; Ernst, D. R.; Garofalo, A. M.; Grierson, B. A.; Hosea, J. C.; Luce, T. C.; Marinoni, A.; McKee, G. R.; Perkins, R. J.; et al

    2015-03-12

    Recent DIII-D experiments in the ITER Baseline Scenario (IBS) have shown strong increases in fluctuations and correlated reduction of confinement associated with entering the electron-heating-dominated regime with strong electron cyclotron heating (ECH). The addition of 3.2 MW of 110 GHz EC power deposited at ?~0.42 to IBS discharges with ~3 MW of neutral beam injection causes large increases in low-k and medium-k turbulent density fluctuations observed with Doppler backscatter (DBS), beam emission spectroscopy (BES) and phase-contrast imaging (PCI) diagnostics, correlated with decreases in the energy, particle, and momentum confinement times. Power balance calculations show the electron heat diffusivity ?e more »increases significantly in the mid-radius region 0.4« less

  4. Instruments High-resolution imaging of

    E-Print Network [OSTI]

    Boppart, Stephen

    Instruments & Methods High-resolution imaging of gynecologic neoplasms using optical coherence and Gynecologists.) Diagnostic imaging methods available to gynecologists include magnetic resonance imaging (MRI

  5. Advanced Sensors and Instrumentation Newsletter | Department...

    Office of Environmental Management (EM)

    & Publications Advanced Sensors and Instrumentation Annual Project Review 2013 Roadmap for Nondestructive Evaluation of Reactor Pressure Vessel Research and Development by...

  6. INSTRUMENTATION, INCLUDING NUCLEAR AND PARTICLE DETECTORS; RADIATION

    Office of Scientific and Technical Information (OSTI)

    interval technical basis document Chiaro, P.J. Jr. 44 INSTRUMENTATION, INCLUDING NUCLEAR AND PARTICLE DETECTORS; RADIATION DETECTORS; RADIATION MONITORS; DOSEMETERS;...

  7. Computational and experimental study of instrumented indentation

    E-Print Network [OSTI]

    Chollacoop, Nuwong, 1977-

    2004-01-01

    The effect of characteristic length scales, through dimensional and microstructural miniaturizations, on mechanical properties is systematically investigated by recourse to instrumented micro- and/or nanoindentation. This ...

  8. Instrumentation & Controls Electrical Engineer | Princeton Plasma...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Instrumentation & Controls Electrical Engineer Department: Engineering Supervisor(s): Tim Stevenson Staff: EM 4 Requisition Number: 151018 Provides general Electrical Engineering,...

  9. Detectors & Other Instrumentation for Research in Environmental...

    Office of Scientific and Technical Information (OSTI)

    Detectors & Other Instrumentation for Research in Environmental Chemistry & Heterogeneous Catalysis at the Stanford Synchrotron Radiation Laboratory Citation Details In-Document...

  10. The matter in extreme conditions instrument at the Linac Coherent Light Source

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Nagler, Bob; Arnold, Brice; Bouchard, Gary; Boyce, Richard F.; Boyce, Richard M.; Callen, Alice; Campell, Marc; Curiel, Ruben; Galtier, Eric; Garofoli, Justin; et al

    2015-04-21

    The LCLS beam provides revolutionary capabilities for studying the transient behavior of matter in extreme conditions. The particular strength of the Matter in Extreme Conditions instrument is that it combines the unique LCLS beam with high-power optical laser beams, and a suite of dedicated diagnostics tailored for this field of science. In this paper an overview of the beamline, the capabilities of the instrumentation, and selected highlights of experiments and commissioning results are presented.

  11. Results & Conclusions SPECInt 2000. 4 way. 32 IQ entries. 128 ROB. 64 LSQ. Baseline: 2-cycle Scheduling Loop latency

    E-Print Network [OSTI]

    Morancho, Enric

    -cycle Scheduling Loop latency Ideal (1 cycle) Our Proposal Our proposal & fusion Speculative Wakeup-mcf Speed-up over Baseline Baseline with Double IQ size (64 IQ entries) Baseline & fusion We have proposed two previously proposed speculative schedulers Conclusions References [Star00] J. Stark et al

  12. The Atomic, Molecular and Optical Science instrument at the Linac Coherent Light Source

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ferguson, Ken R.; Bucher, Maximilian; Bozek, John D.; Carron, Sebastian; Castagna, Jean-Charles; Coffee, Ryan; Curiel, G. Ivan; Holmes, Michael; Krzywinski, Jacek; Messerschmidt, Marc; et al

    2015-05-01

    The Atomic, Molecular and Optical Science (AMO) instrument at the Linac Coherent Light Source (LCLS) provides a tight soft X-ray focus into one of three experimental endstations. The flexible instrument design is optimized for studying a wide variety of phenomena requiring peak intensity. There is a suite of spectrometers and two photon area detectors available. An optional mirror-based split-and-delay unit can be used for X-ray pump–probe experiments. Recent scientific highlights illustrate the imaging, time-resolved spectroscopy and high-power density capabilities of the AMO instrument.

  13. Instrumentation for CTA site characterization

    E-Print Network [OSTI]

    Fruck, Christian; Ernenwein, Jean-Pierre; Mandát, Dušan; Schweizer, Thomas; Häfner, Dennis; Bulik, Tomasz; Cieslar, Marek; Costantini, Heide; Dominik, Michal; Ebr, Jan; Garczarczyk, Markus; Lorentz, Eckart; Pareschi, Giovanni; Pech, Miroslav; Puerto-Giménez, Irene; Teshima, Masahiro

    2015-01-01

    Many atmospheric and climatic criteria have to be taken into account for the selection of a suitable site for the next generation of imaging air-shower Cherenkov telescopes, the "Cherenkov Telescope Array" CTA. Such data are not available with sufficient precision or the comparability to allow for a comprehensive characterization of the proposed sites to be made. Identical cross-calibrated instruments have been developed which allow for precise comparison between sites, the cross-validation of existing data, and the ground-validation of satellite data. The site characterization work package of the CTA consortium opted to construct and deploy 9 copies of an autonomous multi-purpose weather sensor, incorporating an infrared cloud sensor a newly developed sensor for measuring the light of the night sky, and an All-Sky-Camera, the whole referred to as Autonomous Tool for Measuring Observatory Site COnditions PrEcisely (ATMOSCOPE). We present here the hardware that was combined into the ATMOSCOPE and characterize ...

  14. Instrumentation, Control, and Intelligent Systems

    SciTech Connect (OSTI)

    Not Available

    2005-09-01

    Abundant and affordable energy is required for U.S. economic stability and national security. Advanced nuclear power plants offer the best near-term potential to generate abundant, affordable, and sustainable electricity and hydrogen without appreciable generation of greenhouse gases. To that end, Idaho National Laboratory (INL) has been charged with leading the revitalization of nuclear power in the U.S. The INL vision is to become the preeminent nuclear energy laboratory with synergistic, world-class, multi-program capabilities and partnerships by 2015. The vision focuses on four essential destinations: (1) Be the preeminent internationally-recognized nuclear energy research, development, and demonstration laboratory; (2) Be a major center for national security technology development and demonstration; (3) Be a multi-program national laboratory with world-class capabilities; (4) Foster academic, industry, government, and international collaborations to produce the needed investment, programs, and expertise. Crucial to that effort is the inclusion of research in advanced instrumentation, control, and intelligent systems (ICIS) for use in current and advanced power and energy security systems to enable increased performance, reliability, security, and safety. For nuclear energy plants, ICIS will extend the lifetime of power plant systems, increase performance and power output, and ensure reliable operation within the system's safety margin; for national security applications, ICIS will enable increased protection of our nation's critical infrastructure. In general, ICIS will cost-effectively increase performance for all energy security systems.

  15. The CAPTAIN Experiment

    E-Print Network [OSTI]

    Bian, Jianming

    2015-01-01

    The Cryogenic Apparatus for Precision Tests of Argon Interactions with Neutrinos (CAPTAIN) program is designed to make measurements of scientific importance to long-baseline neutrino physics and physics topics that will be explored by large underground detectors. The experiment employs two liquid Argon time projection chambers (LArTPCs), a primary detector with a mass of approximately 10 ton that will be deployed at different facilities for physics measurements and a two ton prototype detector for configuration testing. The physics programs for CAPTAIN include measuring neutron interactions at the Los Alamos Neutron Science Center, measuring neutrino interactions in the high-energy regime (1.5-5 GeV) at Fermilab NuMI beam, and measuring neutrino interactions in the low-energy regime (UV laser track has been seen in its TPC. This paper gives an overview of the CAPTAIN pr...

  16. ME499 Self-Paced Instrumentation Lab: Introduction to Research Instrumentation

    E-Print Network [OSTI]

    Dennis, Robert G.

    ME499 Self-Paced Instrumentation Lab: Introduction to Research Instrumentation Laboratory With web will be in the laboratory and available for questions for several hours each week, as agreed upon at the beginning of each

  17. Nuclear Instruments and Methods in Physics Research A 392 (1997) 402-406 INSTRUMENTS

    E-Print Network [OSTI]

    Thompson, Chris

    1997-01-01

    Nuclear Instruments and Methods in Physics Research A 392 (1997) 402-406 NUCLEAR INSTRUMENTS _.z 6]. Other princi- pal shortcomings of PET are its considerable capital cost and limited availability. We

  18. Neutrino Oscillation Experiments at Nuclear Reactors

    E-Print Network [OSTI]

    Giorgio Gratta

    1999-05-06

    In this paper I give an overview of the status of neutrino oscillation experiments performed using nuclear reactors as sources of neutrinos. I review the present generation of experiments (Chooz and Palo Verde) with baselines of about 1 km as well as the next generation that will search for oscillations with a baseline of about 100 km. While the present detectors provide essential input towards the understanding of the atmospheric neutrino anomaly, in the future, the KamLAND reactor experiment represents our best opportunity to study very small mass neutrino mixing in laboratory conditions. In addition KamLAND with its very large fiducial mass and low energy threshold, will also be sensitive to a broad range of different physics.

  19. PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid N

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-03-27

    This document describe the software programs for the Programmable Logic Controller and the Datable Access Module for Pumping Instrumentation and Control skid ''N''. The Appendices contains copies of the printouts of these software programs. This document describes the software programs for the Allen-Bradley SLC 500 programmable logic controller (PLC) and the Allen-Bradley DTAM PLUS operator interface module used on Pumping Instrumentation and Control (PIC) skid ''N''. The software programs for the SLC 500 and DTAM Plus are based on the core programs provided by Allen-Bradley. The PLC and DTAM software programs on skid ''D'' for SX-104 are the baseline programs. These baselines have been tailored for U-farm skids. The skid ''N'' program for U-109 is similar to the skid ''M'' program for U-102. An Acceptance Test Procedure (ATP) and an Operational Test Procedure (OTP) verify that the software programs meet the specific requirements for U-109 pumping. This document represents the final PLC and DTAM programs for PIC skid ''N'' at U-109. These programs were printed out after the performance of the OTP. The OTP acts as the final qualification test for the software programs. Functional requirements and details of the PLC ladder logic are described in this document. The final programs entered into the PLC and DTAM Plus are included as Appendices to this document.

  20. Instrumentation for Unmanned Aircraft Systems (UAS)

    E-Print Network [OSTI]

    Delene, David J.

    Instrumentation for Unmanned Aircraft Systems (UAS) David Delene Department of Atmospheric Sciences University of North Dakota http://aerosols.atmos.und.edu #12;Objective · Discuss how instruments are used. Washington (DC): National Academies Press (US); 2011. 8, EMERGING METRICS AND MODELS. Available from: https

  1. Focus Article Effects of instrumentation changes

    E-Print Network [OSTI]

    Koek, Frits

    is often not available. There are many historical descriptions of observing practice and instrumentationFocus Article Effects of instrumentation changes on sea surface temperature measured in situ, with the available observations, to develop models for the expected biases, which vary according to how

  2. Exploring Virtual Depth for Automotive Instrument Cluster

    E-Print Network [OSTI]

    Exploring Virtual Depth for Automotive Instrument Cluster Concepts Nora Broy1,2,3 , Benedikt Zierer instrument cluster. Permission to make digital or hard copies of part or all of this work for personal more pronounced as auto-stereoscopic displays become available for the car. For instance, H¨akkil¨a et

  3. Comprehensive Kernel Instrumentation via Dynamic Binary Translation

    E-Print Network [OSTI]

    Toronto, University of

    Comprehensive Kernel Instrumentation via Dynamic Binary Translation Peter Feiner Angela Demke Brown, bug-finding, and security tools. Such tools are currently not available for operating system (OS handlers and device drivers, enabling comprehensive instrumentation of the OS without imposing any overhead

  4. Instrumentation for interstellar exploration Mike Gruntman *

    E-Print Network [OSTI]

    Gruntman, Mike

    , building, and instrumenting a spacecraft for a dedicated foray into the galactic environment surrounding limits on how small the sensors could be. New instrument concepts may be required to achieve the desired- terstellar wind, with the wind direction close to the ecliptic plane. The heliosphere is the region where

  5. Examining Uncertainty in Demand Response Baseline Models and Variability in Automated Response to Dynamic Pricing

    SciTech Connect (OSTI)

    Mathieu, Johanna L.; Callaway, Duncan S.; Kiliccote, Sila

    2011-08-15

    Controlling electric loads to deliver power system services presents a number of interesting challenges. For example, changes in electricity consumption of Commercial and Industrial (C&I) facilities are usually estimated using counterfactual baseline models, and model uncertainty makes it difficult to precisely quantify control responsiveness. Moreover, C&I facilities exhibit variability in their response. This paper seeks to understand baseline model error and demand-side variability in responses to open-loop control signals (i.e. dynamic prices). Using a regression-based baseline model, we define several Demand Response (DR) parameters, which characterize changes in electricity use on DR days, and then present a method for computing the error associated with DR parameter estimates. In addition to analyzing the magnitude of DR parameter error, we develop a metric to determine how much observed DR parameter variability is attributable to real event-to-event variability versus simply baseline model error. Using data from 38 C&I facilities that participated in an automated DR program in California, we find that DR parameter errors are large. For most facilities, observed DR parameter variability is likely explained by baseline model error, not real DR parameter variability; however, a number of facilities exhibit real DR parameter variability. In some cases, the aggregate population of C&I facilities exhibits real DR parameter variability, resulting in implications for the system operator with respect to both resource planning and system stability.

  6. Report of the DOE Review Committee on the baseline validation of the Superconducting Super Collider

    SciTech Connect (OSTI)

    Not Available

    1993-08-01

    The Secretary of Energy directed that an independent review of the current cost and schedule baseline for the SSC be conducted. The purpose of this independent review was to validate the current cost and schedule baseline and to ensure that the project status is accurate as currently reported. Through May 1993, approximately $1.5 billion of the baseline cost of $8.249 billion had been expended, with project completion forecasted on the baseline schedule as of September 1999. This report documents the findings of the SSC Baseline Validation Review Committee (the Committee). The report is organized into five parts. The first section is the Executive Summary. This introduction is followed by a discussion of the project progress/status as determined by the Committee. The next section describes the Committee`s estimate of the cost at completion for the SSC project, followed by an assessment of the adequacy of the business management systems currently being used to manage the project. The final section presents the Committee`s conclusions and recommendations. The main body of the report is followed by the subcommittee reports and appendices.

  7. Baseline Evaluations to Support Control Room Modernization at Nuclear Power Plants

    SciTech Connect (OSTI)

    Boring, Ronald L.; Joe, Jeffrey C.

    2015-02-01

    For any major control room modernization activity at a commercial nuclear power plant (NPP) in the U.S., a utility should carefully follow the four phases prescribed by the U.S. Nuclear Regulatory Commission in NUREG-0711, Human Factors Engineering Program Review Model. These four phases include Planning and Analysis, Design, Verification and Validation, and Implementation and Operation. While NUREG-0711 is a useful guideline, it is written primarily from the perspective of regulatory review, and it therefore does not provide a nuanced account of many of the steps the utility might undertake as part of control room modernization. The guideline is largely summative—intended to catalog final products—rather than formative—intended to guide the overall modernization process. In this paper, we highlight two crucial formative sub-elements of the Planning and Analysis phase specific to control room modernization that are not covered in NUREG-0711. These two sub-elements are the usability and ergonomics baseline evaluations. A baseline evaluation entails evaluating the system as-built and currently in use. The usability baseline evaluation provides key insights into operator performance using the control system currently in place. The ergonomics baseline evaluation identifies possible deficiencies in the physical configuration of the control system. Both baseline evaluations feed into the design of the replacement system and subsequent summative benchmarking activities that help ensure that control room modernization represents a successful evolution of the control system.

  8. Borehole temperatures and a baseline for 20th-century global warming estimates

    SciTech Connect (OSTI)

    Harris, R.N.; Chapman, D.S.

    1997-03-14

    Lack of a 19th-century baseline temperature against which 20th-century warming can be referenced constitutes a deficiency in understanding recent climate change. Combination of borehole temperature profiles, which contain a memory of surface temperature changes in previous centuries, with the meteorologicl archive of surface air temperatures can provide a 19th-century baseline temperature tied to the current observational record. A test case in Utah, where boreholes are interspersed with meteorological stations belonging to the Historical Climatological network, Yields a noise reduction in estimates of 20th-century warming and a baseline temperature that is 0.6{degrees} {+-} 0.1{degrees}C below the 1951 to 1970 mean temperature for the region. 22 refs., 3 figs., 1 tab.

  9. Understanding the Effect of Baseline Modeling Implementation Choices on Analysis of Demand Response Performance

    SciTech Connect (OSTI)

    University of California, Berkeley; Addy, Nathan; Kiliccote, Sila; Mathieu, Johanna; Callaway, Duncan S.

    2012-06-13

    Accurate evaluation of the performance of buildings participating in Demand Response (DR) programs is critical to the adoption and improvement of these programs. Typically, we calculate load sheds during DR events by comparing observed electric demand against counterfactual predictions made using statistical baseline models. Many baseline models exist and these models can produce different shed calculations. Moreover, modelers implementing the same baseline model can make different modeling implementation choices, which may affect shed estimates. In this work, using real data, we analyze the effect of different modeling implementation choices on shed predictions. We focused on five issues: weather data source, resolution of data, methods for determining when buildings are occupied, methods for aligning building data with temperature data, and methods for power outage filtering. Results indicate sensitivity to the weather data source and data filtration methods as well as an immediate potential for automation of methods to choose building occupied modes.

  10. Microbunch preserving in-line system for an APPLE II helical radiator at the LCLS baseline

    E-Print Network [OSTI]

    Geloni, Gianluca; Saldin, Evgeni

    2011-01-01

    In a previous work we proposed a scheme for polarization control at the LCLS baseline, which exploited the microbunching from the planar undulator. After the baseline undulator, the electron beam is transported through a drift by a FODO focusing system, and through a short helical radiator. The microbunching structure can be preserved, and intense coherent radiation is emitted in the helical undulator at fundamental harmonic. The driving idea of this proposal is that the background linearly-polarized radiation from the baseline undulator is suppressed by spatial filtering. Filtering is achieved by letting radiation and electron beam through Be slits upstream of the helical radiator, where the radiation spot size is about ten times larger than the electron beam transverse size. Several changes considered in the present paper were made to improve the previous design. Slits are now placed immediately behind the helical radiator. The advantage is that the electron beam can be spoiled by the slits, and narrower sl...

  11. Photoacoustic Soot Spectrometer (PASS) Instrument Handbook

    SciTech Connect (OSTI)

    Dubey, M; Springston, S; Koontz, A; Aiken, A

    2013-01-17

    The photoacoustic soot spectrometer (PASS) measures light absorption by aerosol particles. As the particles pass through a laser beam, the absorbed energy heats the particles and in turn the surrounding air, which sets off a pressure wave that can be detected by a microphone. The PASS instruments deployed by ARM can also simultaneously measure the scattered laser light at three wavelengths and therefore provide a direct measure of the single-scattering albedo. The Operator Manual for the PASS-3100 is included here with the permission of Droplet Measurement Technologies, the instrument’s manufacturer.

  12. Java Instrumentation for Dynamic Analysis Jeff Perkins and Michael Ernst

    E-Print Network [OSTI]

    Ernst, Michael

    Java Instrumentation for Dynamic Analysis Jeff Perkins and Michael Ernst MIT CSAIL 14 Nov 2005 09:45Page 1 Jeff PerkinsJava Instrumentation for Dynamic Analysis #12;Java Instrumentation Approaches Instrument source files Java Debug Interface (JDI) Instrument class files 14 Nov 2005 09:45Page 2 Jeff

  13. ACRF Instrumentation Status: New, Current, and Future - September – October 2007

    SciTech Connect (OSTI)

    JW Voyles

    2007-10-30

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement (ARM) Climate Research Facility (ACRF) instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) SBIR instrument development.

  14. ACRF Instrumentation Status: New, Current, and Future May 2007

    SciTech Connect (OSTI)

    JC Liljegren

    2007-04-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  15. ACRF Instrumentation Status: New, Current, and Future June 2007

    SciTech Connect (OSTI)

    JC Liljegren

    2007-06-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  16. ACRF Instrumentation Status: New, Current, and Future - November – December 2007

    SciTech Connect (OSTI)

    JW Voyles

    2007-12-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  17. ACRF Instrumentation Status: New, Current, and Future - March 2008

    SciTech Connect (OSTI)

    JW Voyles

    2008-04-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  18. ACRF Instrumentation Status: New, Current, and Future - October – November 2007

    SciTech Connect (OSTI)

    JW Voyles

    2007-11-30

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement (ARM) Climate Research Facility (ACRF) instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) SBIR instrument development.

  19. ACRF Instrumentation Status: New, Current, and Future May 2007

    SciTech Connect (OSTI)

    JC Liljegren

    2007-05-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  20. ACRF Instrumentation Status: New, Current, and Future March 2007

    SciTech Connect (OSTI)

    JC Liljegren

    2007-03-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  1. ACRF Instrumentation Status: New, Current, and Future October 2006

    SciTech Connect (OSTI)

    JC Liljegren

    2006-10-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  2. ACRF Instrumentation Status: New, Current, and Future February 2007

    SciTech Connect (OSTI)

    JC Liljegren

    2007-02-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development

  3. ACRF Instrumentation Status: New, Current, and Future January 2007

    SciTech Connect (OSTI)

    JC Liljegren

    2007-01-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  4. ACRF Instrumentation Status: New, Current, and Future - February 2008

    SciTech Connect (OSTI)

    JW Voyles

    2008-03-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  5. ACRF Instrumentation Status: New, Current, and Future July 2007

    SciTech Connect (OSTI)

    JC Liljegren

    2007-07-01

    The purpose of this report is to provide a concise but comprehensive overview of ACRF instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) SBIR instrument development.

  6. INITIAL COMPARISON OF BASELINE PHYSICAL AND MECHANICAL PROPERTIES FOR THE VHTR CANDIDATE GRAPHITE GRADES

    SciTech Connect (OSTI)

    Carroll, Mark C

    2014-09-01

    High-purity graphite is the core structural material of choice in the Very High Temperature Reactor (VHTR) design, a graphite-moderated, helium-cooled configuration that is capable of producing thermal energy for power generation as well as process heat for industrial applications that require temperatures higher than the outlet temperatures of present nuclear reactors. The Baseline Graphite Characterization Program is endeavoring to minimize the conservative estimates of as-manufactured mechanical and physical properties in nuclear-grade graphites by providing comprehensive data that captures the level of variation in measured values. In addition to providing a thorough comparison between these values in different graphite grades, the program is also carefully tracking individual specimen source, position, and orientation information in order to provide comparisons both in specific properties and in the associated variability between different lots, different billets, and different positions from within a single billet. This report is a preliminary comparison between each of the grades of graphite that are considered “candidate” grades from four major international graphite producers. These particular grades (NBG-18, NBG-17, PCEA, IG-110, and 2114) are the major focus of the evaluations presently underway on irradiated graphite properties through the series of Advanced Graphite Creep (AGC) experiments. NBG-18, a medium-grain pitch coke graphite from SGL from which billets are formed via vibration molding, was the favored structural material in the pebble-bed configuration. NBG-17 graphite from SGL is essentially NBG-18 with the grain size reduced by a factor of two. PCEA, petroleum coke graphite from GrafTech with a similar grain size to NBG-17, is formed via an extrusion process and was initially considered the favored grade for the prismatic layout. IG-110 and 2114, from Toyo Tanso and Mersen (formerly Carbone Lorraine), respectively, are fine-grain grades produced via an isomolding process. An analysis of the comparison between each of these grades will include not only the differences in fundamental and statistically-significant individual strength levels, but also the differences in variability in properties within each of the grades that will ultimately provide the basis for the prediction of in-service performance. The comparative performance of the different types of nuclear-grade graphites will continue to evolve as thousands more specimens are fully characterized from the numerous grades of graphite being evaluated.

  7. A nano-stepping robotic instrumentation platform

    E-Print Network [OSTI]

    Wahab, Adam Joseph

    2013-01-01

    The development of an Autonomous Nano-stepping Tool (ANT) system is presented. Each ANT is a small, tripodal, robotic instrument capable of untethered precision motion within a quasi-three-dimensional workspace of arbitrary ...

  8. Field instrumentation for vocalizing avian survey

    E-Print Network [OSTI]

    Elliott, Grant (Grant Andrew)

    2007-01-01

    We present automated instruments to facilitate the monitoring of vocalizing species in their environment with minimal disruption. These devices offer recording and acoustic localization of bird calls and relay data via the ...

  9. Cellular telephone-based radiation detection instrument

    DOE Patents [OSTI]

    Craig, William W. (Pittsburg, CA); Labov, Simon E. (Berkeley, CA)

    2011-06-14

    A network of radiation detection instruments, each having a small solid state radiation sensor module integrated into a cellular phone for providing radiation detection data and analysis directly to a user. The sensor module includes a solid-state crystal bonded to an ASIC readout providing a low cost, low power, light weight compact instrument to detect and measure radiation energies in the local ambient radiation field. In particular, the photon energy, time of event, and location of the detection instrument at the time of detection is recorded for real time transmission to a central data collection/analysis system. The collected data from the entire network of radiation detection instruments are combined by intelligent correlation/analysis algorithms which map the background radiation and detect, identify and track radiation anomalies in the region.

  10. 08/04/2000 Optimization of a Baseline H.263 Encoder on the TMS320C6000 1 08/04/2000 Optimization of a Baseline H.263 Encoder on the TMS320C6000 2

    E-Print Network [OSTI]

    Evans, Brian L.

    08/04/2000 Optimization of a Baseline H.263 Encoder on the TMS320C6000 1 #12;08/04/2000 redundancy in the prediction error. I P P I Frame ... #12;08/04/2000 Optimization of a Baseline H.263 Encoder ME: Motion Estimation #12;08/04/2000 Optimization of a Baseline H.263 Encoder on the TMS320C6000 4

  11. Smart Focal Plane Technologies for VLT Instruments

    E-Print Network [OSTI]

    Colin Cunningham; Chris Evans

    2008-01-19

    As we move towards the era of ELTs, it is timely to think about the future role of the 8-m class telescopes. Under the OPTICON programme, novel technologies have been developed that are intended for use in multi-object and integral-field spectrographs. To date, these have been targeted at instrument concepts for the European ELT, but there are also significant possibilities for their inclusion in new VLT instruments, ensuring the continued success and productivity of these unique telescopes.

  12. Curtis Instruments Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (UtilityInstruments Inc Jump to: navigation, search Name: Curtis Instruments,

  13. Baseline Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O OLaura BeaneCardwell,Production

  14. NIH's SHARED INSTRUMENTATION GRANT (SIG) PROGRAM (S10) The Office of Research Infrastructure Programs (ORIP) Shared Instrument Grant (SIG) program

    E-Print Network [OSTI]

    Finley Jr., Russell L.

    is to make available to institutions expensive research instruments that can only be justified on a shared available instrumentation or an integrated instrument system. An integrated instrument system is one-use instrumentation not generally available through other NIH mechanisms, such as the regular research project

  15. Digestion Experiments

    E-Print Network [OSTI]

    Fraps, G. S. (George Stronach)

    1908-01-01

    STATION. ppp DIGESTION EXPERIMENTS G. S. FRAPS, PH. D., CHEMIST. POSTOFFICE COLLEGE SL'ATION, HRAZOS COUNTY, TEXAS. AUSTIN, TEXAS: \\'ON BOECKMANN-JONES CO., PRLNTEHP. 1908 TEXAS AGRICULTURAL EXPERIMENT 8TArFIONS. OFFICERS. GOVERNING BOARD... OF CONTENTS . 1 . Digestibility of 1Caffir Corn. Milo Maize. and Molasses ....... G .................................... Ilcfinition of Terms 7 .................................. Method of Experiment 7 ............ Digestibility of Basal Ration of Meal...

  16. Data Release Report for Source Physics Experiments 2 and 3 (SPE-2 and SPE-3) Nevada National Security Site

    SciTech Connect (OSTI)

    Townsend, Margaret; Obi, Curtis

    2015-04-30

    The second Source Physics Experiment shot (SPE-2) was conducted in Nevada on October 25, 2011, at 1900:00.011623 Greenwich Mean Time (GMT). The explosive source was 997 kilograms (kg) trinitrotoluene (TNT) equivalent of sensitized heavy ammonium fuel oil (SHANFO) detonated at a depth of 45.7 meters (m). The third Source Physics Experiment shot (SPE-3) was conducted in Nevada on July 24, 2012, at 1800:00.44835 GMT. The explosive source was 905 kg TNT equivalent of SHANFO detonated at a depth of 45.8 m. Both shots were recorded by an extensive set of instrumentation that includes sensors both at near-field (less than 100 m) and far-field (100 m or greater) distances. The near-field instruments consisted of three-component accelerometers deployed in boreholes at 15, 46, and 55 m depths around the shot and a set of single-component vertical accelerometers on the surface. The far-field network was composed of a variety of seismic and acoustic sensors, including short-period geophones, broadband seismometers, three-component accelerometers, and rotational seismometers at distances of 100 m to 25 kilometers. This report coincides with the release of these data for analysts and organizations that are not participants in this program. This report describes the second and third Source Physics Experiment shots and the various types of near-field and farfield data that are available.This revised document includes reports on baseline shift corrections for the SPE-2 and SPE-3 shots that were missing from the original January 2015 version.

  17. BE511 Class Syllabus and Schedule -Spring, 2015 Biomedical Instrumentation

    E-Print Network [OSTI]

    Vajda, Sandor

    BE511 Class Syllabus and Schedule - Spring, 2015 Biomedical Instrumentation Instructor: Prof and pdf's posted throughout the semester References: 1. Medical Instrumentation: Application and Design Engineering) Course Description: This course is an introduction to biomedical instrument design. We

  18. Autonomous analysis of interactive systems with selfpropelled instrumentation #+

    E-Print Network [OSTI]

    Miller, Barton P.

    Autonomous analysis of interactive systems with self­propelled instrumentation #+ Alexander V. To address these limitations, we propose a novel approach called self­propelled instrumentation. As it propagates, it inserts instrumentation dynamically to collect and analyze detailed execution information

  19. Architecture for an Automated Management Instrumentation of Component Based

    E-Print Network [OSTI]

    Architecture for an Automated Management Instrumentation of Component Based Applications Rainer management cannot provide this kind of user­oriented information. At present, only instrumentation techniques are suited to provide the required information. On the other hand instrumentation techniques cause

  20. Architecture for an Automated Management Instrumentation of Component Based

    E-Print Network [OSTI]

    Architecture for an Automated Management Instrumentation of Component Based Applications Rainer management cannot provide this kind of user-oriented information. At present, only instrumentation techniques are suited to provide the required information. On the other hand instrumentation techniques cause

  1. Scalable Support for Multithreaded Applications on Dynamic Binary Instrumentation Systems

    E-Print Network [OSTI]

    Hazelwood, Kim

    Scalable Support for Multithreaded Applications on Dynamic Binary Instrumentation Systems Kim Dynamic binary instrumentation systems are used to inject or mod- ify arbitrary instructions in existing for supporting large, multithreaded applications on JIT-based dynamic instrumentation systems. While implementing

  2. Autonomous analysis of interactive systems with self-propelled instrumentation

    E-Print Network [OSTI]

    Miller, Barton P.

    Autonomous analysis of interactive systems with self-propelled instrumentation Alexander V. To address these limitations, we propose a novel approach called self-propelled instrumentation. As it propagates, it inserts instrumentation dynamically to collect and analyze detailed execution information

  3. Acoustical study of the playing characteristics of brass wind instruments 

    E-Print Network [OSTI]

    Logie, Shona Mary

    2013-07-01

    When assessing the quality of a brass instrument the player must consider a number of factors, the main consideration being the playability of the chosen instrument. The playability of an instrument is a broad term used ...

  4. Comparison of Ambient Radon Concentrations in Air in the Northern Mojave Desert from Continuous and Integrating Instruments

    SciTech Connect (OSTI)

    David S. Shafer; David McGraw; Lynn H. Karr; Greg McCurdy; Tammy L. Kluesner; Karen J. Gray; Jeffrey Tappen

    2010-05-18

    As part of a program to characterize and baseline environmental parameters, ambient radon-222 (Rn) monitoring was conducted in the rural community of Amargosa Valley, NV, the closest community to Yucca Mountain. Passive integrating and continuous Rn monitoring instruments were deployed adjacent to the Community Environmental Monitoring Program (CEMP) station in Amargosa Valley. The CEMP station provided real-time ambient gamma exposure and meteorological data used to correct the integrated Rn measurements, verified the meteorological data collected by the continuous Rn monitoring instrument, and for provided instrumentation for evaluating the relationships between meteorological conditions and Rn concentrations. Hourly Rn concentrations in air measured by the continuous Rn monitoring instrument (AlphaGUARD®) were compared to the average hourly values for the integrating Rn measurements (E-PERM®) by dividing the total Rn measurements by the number of hours the instruments were deployed. The results of the comparison indicated that average hourly ambient Rn concentrations as measured by both methods ranged from 0.2 to 0.4 pico-curies per liter of air. Ambient Rn values for the AlphaGUARD exhibited diurnal variations. When Rn concentrations were compared with measurements of temperature (T), barometric pressure, and relative humidity, the correlation (inversely) was highest with T, albeit weakly.

  5. Functional connectivity in a baseline resting-state network in autism

    E-Print Network [OSTI]

    Functional connectivity in a baseline resting-state network in autism Vladimir L. Cherkassky@cmu.edu Acknowledgements:This research was supported by the Collaborative Program of Excellence in Autism (CPEA) Grant HD 28 July 2006 Brain activity in people with high-functioning autism has been shown to be atypical

  6. Waste Isolation Pilot Plant Transuranic Waste Baseline inventory report. Volume 2. Revision 1

    SciTech Connect (OSTI)

    NONE

    1995-02-01

    This document is the Baseline Inventory Report for the transuranic (alpha-bearing) wastes stored at the Waste Isolation Pilot Plant (WIPP) in New Mexico. Waste stream profiles including origin, applicable EPA codes, typical isotopic composition, typical waste densities, and typical rates of waste generation for each facility are presented for wastes stored at the WIPP.

  7. LongBaseline Neutrino Physics and Astrophysics Institute for Nuclear Theory Summer Program 2010

    E-Print Network [OSTI]

    Washington at Seattle, University of - Department of Physics, Electroweak Interaction Research Group

    LongBaseline Neutrino Physics and Astrophysics Institute for Nuclear Theory Summer Program 2010 for Nuclear Theory Summer Program 2010 Robert J. Wilson 8/11/2010Page 2 Wednesday August 11th Session 6 PWG C520 14:00 Solar, Geo, and Reactor Neutrinos N. Tolich (Washington) 14:30 Q&A Guests/PWG Session 8

  8. WIDE-BASELINE IMAGE CHANGE DETECTION Ziggy Jones Mike Brookes Pier Luigi Dragotti David Benton

    E-Print Network [OSTI]

    Dragotti, Pier Luigi

    the problem of wide-baseline image change detection and presents a method for identifying areas that have such as leaves rustling in the wind. The appearance of any planar region of the scene in two different images to pro- duce fewer matches and require a larger computational effort. This paper utilises a novel

  9. Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Iovenitti, Joe

    The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The Project chose the Dixie Valley Geothermal System in Nevada as a field laboratory site for methodlogy calibration purposes because, in the public domain, it is a highly characterized geothermal systems in the Basin and Range with a considerable amount of geoscience and most importantly, well data. This Baseline Conceptual Model report summarizes the results of the first three project tasks (1) collect and assess the existing public domain geoscience data, (2) design and populate a GIS database, and (3) develop a baseline (existing data) geothermal conceptual model, evaluate geostatistical relationships, and generate baseline, coupled EGS favorability/trust maps from +1km above sea level (asl) to -4km asl for the Calibration Area (Dixie Valley Geothermal Wellfield) to identify EGS drilling targets at a scale of 5km x 5km. It presents (1) an assessment of the readily available public domain data and some proprietary data provided by Terra-Gen Power, LLC, (2) a re-interpretation of these data as required, (3) an exploratory geostatistical data analysis, (4) the baseline geothermal conceptual model, and (5) the EGS favorability/trust mapping. The conceptual model presented applies to both the hydrothermal system and EGS in the Dixie Valley region.

  10. Baseline Risk Assessment for the F-Area Burning/Rubble Pits and Rubble Pit

    SciTech Connect (OSTI)

    Palmer, E.

    1996-03-01

    This document provides an overview of the Savannah River Site (SRS) and a description of the F-Area Burning/Rubble Pits (BRPs) and Rubble Pit (RP) unit. It also describes the objectives and scope of the baseline risk assessment (BRA).

  11. Tank waste remediation system retrieval and disposal mission initial updated baseline summary

    SciTech Connect (OSTI)

    Swita, W.R.

    1998-01-05

    This document provides a summary of the proposed Tank Waste Remediation System Retrieval and Disposal Mission Initial Updated Baseline (scope, schedule, and cost) developed to demonstrate the Tank Waste Remediation System contractor`s Readiness-to-Proceed in support of the Phase 1B mission.

  12. Numerical Modeling of CIGS Solar Cells: Definition of the Baseline and

    E-Print Network [OSTI]

    Sites, James R.

    Thesis Numerical Modeling of CIGS Solar Cells: Definition of the Baseline and Explanation our supervision by Markus Gloeckler entitled "Numerical Modeling of CIGS Solar Cells: Definition. A three-layer structure, simulating a Cu(InGa)Se2 (CIGS) heterojunction solar cell, was set up using

  13. NUMERICAL MODELING OF CIGS AND CdTe SOLAR CELLS: SETTING THE BASELINE

    E-Print Network [OSTI]

    Sites, James R.

    NUMERICAL MODELING OF CIGS AND CdTe SOLAR CELLS: SETTING THE BASELINE M. Gloeckler, A important complications that are often found in experimental CIGS and CdTe solar cells. 1. INTRODUCTION Numerical modeling of polycrystalline thin-film solar cells is an important strategy to test the viability

  14. Energy Analysis, Baselining and Modeling of Prairie View A&M University 

    E-Print Network [OSTI]

    Abushakra, B.; Haberl, J. S.; Claridge, D. E.; Eggebrecht, J.; Carlson, K. A.

    1998-01-01

    Analysis of the available data found that electricity savings in the J.B. Coleman Library for June - September, 1998 were 298 MWh, or 38% of the baseline consumption during these months. Extrapolation of these savings to a full year leads would...

  15. A Methodology for Establishing Information Quality Baselines for Complex, Distributed Systems

    E-Print Network [OSTI]

    Grossman, Robert

    to occur in the future. Key Words: Data Quality, Information Quality, Baselines, Alert Management System, investigating, and ameliorating the information quality of event based data. Here is a motivating example and information quality problems. 3. Each party that processes the data usually employs several different systems

  16. Optimal core baseline design and observing strategy for probing the astrophysics of reionization with the SKA

    E-Print Network [OSTI]

    Greig, Bradley; Koopmans, Léon V E

    2015-01-01

    With the first phase of the Square Kilometre Array (SKA1) entering into its final pre-construction phase, we investigate how best to maximise its scientific return. Specifically, we focus on the statistical measurement of the 21 cm power spectrum (PS) from the epoch of reionization (EoR) using the low frequency array, SKA1-low. To facilitate this investigation we use the recently developed MCMC based EoR analysis tool 21CMMC (Greig & Mesinger). In light of the recent 50 per cent cost reduction, we consider several different SKA core baseline designs, changing: (i) the number of antenna stations; (ii) the number of dipoles per station; and also (iii) the distribution of baseline lengths. We find that a design with a reduced number of dipoles per core station (increased field of view and total number of core stations), together with shortened baselines, maximises the recovered EoR signal. With this optimal baseline design, we investigate three observing strategies, analysing the trade-off between lowering t...

  17. Effects of corticosterone pellets on baseline and stress-induced corticosterone and corticosteroid-binding-globulin

    E-Print Network [OSTI]

    Alvarez, Nadir

    Effects of corticosterone pellets on baseline and stress-induced corticosterone and corticosteroid-degradable corticosterone pellets (implanted under the skin) in elevating plasma corticosterone levels. We monitored to handling in Eurasian kestrel Falco tinnunculus and barn owl Tyto alba nestlings. Corticosterone pellets

  18. WIPP Project Plan Descriptions Waste Characterization (LANL, SRS, Oak Ridge) Baseline Inspections

    E-Print Network [OSTI]

    WIPP Project Plan Descriptions · Waste Characterization (LANL, SRS, Oak Ridge) Baseline Inspections Change Request As part of EPA's WIPP Certification Decision in 1998, EPA required that the disposal of Energy (DOE) submitted a planned change request reducing to the amount of MgO emplaced in the WIPP

  19. Baseline design/economics for advanced Fischer-Tropsch technology. Quarterly report, January--March 1992

    SciTech Connect (OSTI)

    Not Available

    1992-09-01

    The objectives of the study are to: Develop a baseline design for indirect liquefaction using advanced Fischer-Tropsch (F-T) technology. Prepare the capital and operating costs for the baseline design. Develop a process flow sheet simulation (PFS) model. This report summarizes the activities completed during the period December 23, 1992 through March 15, 1992. In Task 1, Baseline Design and Alternates, the following activities related to the tradeoff studies were completed: approach and basis; oxygen purity; F-T reactor pressure; wax yield; autothermal reformer; hydrocarbons (C{sub 3}/C{sub 4}s) recovery; and hydrogenrecovery. In Task 3, Engineering Design Criteria, activities were initiated to support the process tradeoff studies in Task I and to develop the environmental strategy for the Illinois site. The work completed to date consists of the development of the F-T reactor yield correlation from the Mobil dam and a brief review of the environmental strategy prepared for the same site in the direct liquefaction baseline study.Some work has also been done in establishing site-related criteria, in establishing the maximum vessel diameter for train sizing and in coping with the low H{sub 2}/CO ratio from the Shell gasifier. In Task 7, Project Management and Administration, the following activities were completed: the subcontract agreement between Amoco and Bechtel was negotiated; a first technical progress meeting was held at the Bechtel office in February; and the final Project Management Plan was approved by PETC and issued in March 1992.

  20. Baseline design/economics for advanced Fischer-Tropsch technology. Quarterly report, April--June 1992

    SciTech Connect (OSTI)

    Not Available

    1992-10-01

    Effective September 26, 1991, Bechtel, with Amoco as the main subcontractor, initiated a study to develop a computer model and baseline design for advanced Fischer-Tropsch (F-T) technology for the US Department of Energy`s Pittsburgh Energy Technology Center (PETC). The objectives of the study are to: Develop a baseline design for indirect liquefaction using advanced F-T technology; prepare the capital and operating costs for the baseline design; and develop a process flow sheet simulation (PI-S) model. The baseline design, the economic analysis, and the computer model win be the major research planning tools that PETC will use to plan, guide, and evaluate its ongoing and future research and commercialization programs relating to indirect coal liquefaction. for the manufacture of synthetic liquid fuels from coal. This report is Bechtel`s third quarterly technical progress report covering the period from March 16, 1992 through June 21, 1992. This report consists of seven sections: Section 1 - introduction; Section 2 - summary; Section 3 - carbon dioxide removal tradeoff study; Section 4 - preliminary plant designs for coal preparation; Section 5 - preliminary design for syngas production; Section 6 - Task 3 - engineering design criteria; and Section 7 - project management.

  1. Baseline and Target Values for PV Forecasts: Toward Improved Solar Power Forecasting: Preprint

    SciTech Connect (OSTI)

    Zhang, Jie; Hodge, Bri-Mathias; Lu, Siyuan; Hamann, Hendrik F.; Lehman, Brad; Simmons, Joseph; Campos, Edwin; Banunarayanan, Venkat

    2015-08-05

    Accurate solar power forecasting allows utilities to get the most out of the solar resources on their systems. To truly measure the improvements that any new solar forecasting methods can provide, it is important to first develop (or determine) baseline and target solar forecasting at different spatial and temporal scales. This paper aims to develop baseline and target values for solar forecasting metrics. These were informed by close collaboration with utility and independent system operator partners. The baseline values are established based on state-of-the-art numerical weather prediction models and persistence models. The target values are determined based on the reduction in the amount of reserves that must be held to accommodate the uncertainty of solar power output. forecasting metrics. These were informed by close collaboration with utility and independent system operator partners. The baseline values are established based on state-of-the-art numerical weather prediction models and persistence models. The target values are determined based on the reduction in the amount of reserves that must be held to accommodate the uncertainty of solar power output.

  2. A baseline model for utility bill analysis using both weather and non-weather-related variables

    SciTech Connect (OSTI)

    Sonderegger, R.C. [SRC Systems, Inc., Berkeley, CA (United States)

    1998-12-31

    Many utility bill analyses in the literature rely only on weather-based correlations. While often the dominant cause of seasonal variations in utility consumption, weather variables are far from the only determinant factors. Vacation shutdowns, plug creep, changes in building operation and square footage, and plain poor correlation are all too familiar to the practicing performance contractor. This paper presents a generalized baseline equation, consistent with prior results by others but extended to include other, non-weather-related independent variables. Its compatibility with extensive prior research by others is shown, as well as its application to several types of facilities. The baseline equation, as presented, can accommodate up to five simultaneous independent variables for a maximum of eight free parameters. The use of two additional, empirical degree-day threshold parameters is also discussed. The baseline equation presented here is at the base of a commercial utility accounting software program. All case studies presented to illustrate the development of the baseline equation for each facility are drawn from real-life studies performed by users of this program.

  3. Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Iovenitti, Joe

    2013-05-15

    The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The Project chose the Dixie Valley Geothermal System in Nevada as a field laboratory site for methodlogy calibration purposes because, in the public domain, it is a highly characterized geothermal systems in the Basin and Range with a considerable amount of geoscience and most importantly, well data. This Baseline Conceptual Model report summarizes the results of the first three project tasks (1) collect and assess the existing public domain geoscience data, (2) design and populate a GIS database, and (3) develop a baseline (existing data) geothermal conceptual model, evaluate geostatistical relationships, and generate baseline, coupled EGS favorability/trust maps from +1km above sea level (asl) to -4km asl for the Calibration Area (Dixie Valley Geothermal Wellfield) to identify EGS drilling targets at a scale of 5km x 5km. It presents (1) an assessment of the readily available public domain data and some proprietary data provided by Terra-Gen Power, LLC, (2) a re-interpretation of these data as required, (3) an exploratory geostatistical data analysis, (4) the baseline geothermal conceptual model, and (5) the EGS favorability/trust mapping. The conceptual model presented applies to both the hydrothermal system and EGS in the Dixie Valley region.

  4. Sandia National Laboratories/New Mexico Environmental Baseline update--Revision 1.0

    SciTech Connect (OSTI)

    1996-07-01

    This report provides a baseline update to provide the background information necessary for personnel to prepare clear and consise NEPA documentation. The environment of the Sandia National Laboratories is described in this document, including the ecology, meteorology, climatology, seismology, emissions, cultural resources and land use, visual resources, noise pollution, transportation, and socioeconomics.

  5. DRAFT VERSION September 6, 2009 1 1990 GHG Baseline for Building Energy Use

    E-Print Network [OSTI]

    Escher, Christine

    DRAFT VERSION ­ September 6, 2009 1 1990 GHG Baseline for Building Energy Use in the Oregon of 1990 building energy use and the associated greenhouse gas (GHG) emissions for Oregon University System's stated intent. Specifically, there is a focus on building energy use, the single largest source of direct

  6. RCRA Facility Investigation/Remedial Investigation Report with the Baseline Risk Assessment for the 716-A Motor Shops Seepage Basin

    SciTech Connect (OSTI)

    Palmer, E.

    1997-08-25

    This document describes the RCRA Facility Investigation/Remedial Investigation/Baseline Risk Assessment of the 716-A Motor Shops Seepage Basin.

  7. "Insurance as a Risk Management Instrument for Energy Infrastructure...

    Energy Savers [EERE]

    "Insurance as a Risk Management Instrument for Energy Infrastructure Security and Resilience" Report (March 2013) "Insurance as a Risk Management Instrument for Energy...

  8. The radioactive Substances (Testing Instruments) Exemption (Scotland)Order 1962 

    E-Print Network [OSTI]

    Noble, Michael

    1962-01-01

    STATUTORY INSTRUMENTS 1962 No. 2764 (S. 124) ATOMIC ENERGY AND RADIOACTIVE SUBSTANCES The Radioactive Substances (Testing instruments) Exemption (Scotland) Order 1962

  9. Development of Remove Sensing Instrumentation for NOx and PM...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Development of Remove Sensing Instrumentation for NOx and PM Emissions from Heavy Duty Trucks Development of Remove Sensing Instrumentation for NOx and PM Emissions from Heavy Duty...

  10. Mass Correlation of Engine Emissions with Spectral Instruments...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mass Correlation of Engine Emissions with Spectral Instruments Mass Correlation of Engine Emissions with Spectral Instruments 2004 Diesel Engine Emissions Reduction (DEER)...

  11. DOE Announces Webinars on Instrumentation for Monitoring Marine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Instrumentation for Monitoring Marine Renewable Energy Devices, Energy Efficiency in Correctional Facilities, and More DOE Announces Webinars on Instrumentation for Monitoring...

  12. Instrumentation Technical Program Management Team: FY-1987 annual report

    SciTech Connect (OSTI)

    Hanson, M.L.; Englert, G.L.; Grametbauer, G.L.

    1988-04-14

    This report contains evaluations of process, environmental, health, and safety instrumentation of gaseous diffusion plants. The study was conducted by the instrumentation technical program management team. (LSP)

  13. The Coherent X-ray Imaging instrument at the Linac Coherent Light Source

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liang, Mengning; Williams, Garth J.; Messerschmidt, Marc; Seibert, M. Marvin; Montanez, Paul A.; Hayes, Matt; Milathianaki, Despina; Aquila, Andrew; Hunter, Mark S.; Koglin, Jason E.; et al

    2015-04-15

    The Coherent X-ray Imaging (CXI) instrument specializes in hard X-ray, in-vacuum, high power density experiments in all areas of science. Two main sample chambers, one containing a 100 nm focus and one a 1 µm focus, are available, each with multiple diagnostics, sample injection, pump–probe and detector capabilities. The flexibility of CXI has enabled it to host a diverse range of experiments, from biological to extreme matter.

  14. Revealing Protocol Information and Activity from Energy Instrumentation in Wireless Sensor

    E-Print Network [OSTI]

    Gnawali, Omprakash

    of features based on various aspects of energy data and use those features to classify and reveal network based on energy data by doing extensive experiments on three WSN testbeds. Our results from analyzing four-million energy data and ra- dio activity points, indicate that energy instrumentation

  15. HTGR-SC/C program baseline review meeting, Session IIC: circulators, C and I, and helium service

    SciTech Connect (OSTI)

    Not Available

    1981-01-01

    Information is presented concerning main and auxiliary circulators; reactor service equipment; and control and instrumentation systems.

  16. Spring/dimple instrument tube restraint

    DOE Patents [OSTI]

    DeMario, E.E.; Lawson, C.N.

    1993-11-23

    A nuclear fuel assembly for a pressurized water nuclear reactor has a spring and dimple structure formed in a non-radioactive insert tube placed in the top of a sensor receiving instrumentation tube thimble disposed in the fuel assembly and attached at a top nozzle, a bottom nozzle, and intermediate grids. The instrumentation tube thimble is open at the top, where the sensor or its connection extends through the cooling water for coupling to a sensor signal processor. The spring and dimple insert tube is mounted within the instrumentation tube thimble and extends downwardly adjacent the top. The springs and dimples restrain the sensor and its connections against lateral displacement causing impact with the instrumentation tube thimble due to the strong axial flow of cooling water. The instrumentation tube has a stainless steel outer sleeve and a zirconium alloy inner sleeve below the insert tube adjacent the top. The insert tube is relatively non-radioactivated inconel alloy. The opposed springs and dimples are formed on diametrically opposite inner walls of the insert tube, the springs being formed as spaced axial cuts in the insert tube, with a web of the insert tube between the cuts bowed radially inwardly for forming the spring, and the dimples being formed as radially inward protrusions opposed to the springs. 7 figures.

  17. A market-based environmental policy experiment in Chile

    E-Print Network [OSTI]

    Montero, Juan-Pablo

    2000-01-01

    Despite growing interest in the use of emissions trading for pollution control, empirical evidence for this regulatory instrument has been confined to a few experiences in the United States. This paper broadens the empirical ...

  18. Experiment Profile:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    their shapes, how galaxies cluster and the brightness of exploding stars called supernovae. WHY IS THIS EXPERIMENT NEEDED NOW? Research during the last decade using different...

  19. Nuclear Instruments and Methods in Physics Research A 356 (1995) l-4 INSTRUMENTS

    E-Print Network [OSTI]

    Dutz, Hartmut

    1995-01-01

    ELSEVIER Nuclear Instruments and Methods in Physics Research A 356 (1995) l-4 NUCLEAR INSTRUMENTS 8 METHODS IN PHYSICS REgtR?n Thermodynamics of dynamic nuclear polarization W.Th. Wenckebach Faculty ofApplied Physics, Delfr Unicersity of Technology, P.O.B. 5046, 2600 GA De& The Netherlands Abstract Dynamic nuclear

  20. Nuclear Instruments and Methods in Physics Research A 360 (1995) 189-192 INSTRUMENTS

    E-Print Network [OSTI]

    Ramello, Luciano

    1995-01-01

    ELSEVIER Nuclear Instruments and Methods in Physics Research A 360 (1995) 189-192 NUCLEARFaculty ofPhysics and Nuclear Techniques Academy ofMining and Metallurgy, Cracow, Poland h INFN, Torino INSTRUMENTS 8 METHODS IN PHYSICS RESEARCH SectIonA A fast, high-granularity silicon multiplicity detector

  1. ELSEVIER Nuclear Instruments and Methods in Physics Research A 403 (1998) 43 l-441 INSTRUMENTS

    E-Print Network [OSTI]

    Pázsit, Imre

    1998-01-01

    ELSEVIER Nuclear Instruments and Methods in Physics Research A 403 (1998) 43 l-441 INSTRUMENTS reserved P11 SO168-9002(97)011'2-4 #12;432 I. P&it. Y YamanefNucl. Instr. and Meth. in Ph_w. Rex A 403

  2. Instrumentation of dredge spoil for landfill construction

    SciTech Connect (OSTI)

    Byle, M.J.; McCullough, M.L.; Alexander, R.; Vasuki, N.C.; Langer, J.A.

    1999-07-01

    The Delaware Solid Waste Authority's Northern Solid Waste Management Center is located outside of Wilmington Delaware at Cherry Island, a former dredge disposal site. Dredge spoils, of very low permeability, range in depths up to 30 m (100 feet) which form a natural liner and the foundation for the 140 ha (350-acre) municipal solid waste landfill. The soils beneath the landfill have been extensively instrumented to measure pore pressure, settlement and deflections, using inclinometer casings, standpipe piezometers, vibrating wire piezometers, pneumatic piezometers, settlement plates, liquid settlement gages, total pressure cells and thermistors. The nature of the existing waste and anticipated settlements (up to 6 m (19 feet)) have required some unique installation details. The instrumentation data has been integral in planning the landfilling sequence to maintain perimeter slope stability and has provided key geotechnical parameters needed for operation and construction of the landfill. The performance of the instrumentation and monitoring results are discussed.

  3. Instrumentation to Enhance Advanced Test Reactor Irradiations

    SciTech Connect (OSTI)

    J. L. Rempe; D. L. Knudson; K. G. Condie; J. E. Daw; S. C. Taylor

    2009-09-01

    The Department of Energy (DOE) designated the Advanced Test Reactor (ATR) as a National Scientific User Facility (NSUF) in April 2007 to support U.S. leadership in nuclear science and technology. By attracting new research users - universities, laboratories, and industry - the ATR will support basic and applied nuclear research and development, further advancing the nation's energy security needs. A key component of the ATR NSUF effort is to prove new in-pile instrumentation techniques that are capable of providing real-time measurements of key parameters during irradiation. To address this need, an assessment of instrumentation available and under-development at other test reactors has been completed. Based on this review, recommendations are made with respect to what instrumentation is needed at the ATR and a strategy has been developed for obtaining these sensors. Progress toward implementing this strategy is reported in this document. It is anticipated that this report will be updated on an annual basis.

  4. Advances in instrumentation for nuclear astrophysics

    SciTech Connect (OSTI)

    Pain, S. D. [Physics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States)] [Physics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States)

    2014-04-15

    The study of the nuclear physics properties which govern energy generation and nucleosynthesis in the astrophysical phenomena we observe in the universe is crucial to understanding how these objects behave and how the chemical history of the universe evolved to its present state. The low cross sections and short nuclear lifetimes involved in many of these reactions make their experimental determination challenging, requiring developments in beams and instrumentation. A selection of developments in nuclear astrophysics instrumentation is discussed, using as examples projects involving the nuclear astrophysics group at Oak Ridge National Laboratory. These developments will be key to the instrumentation necessary to fully exploit nuclear astrophysics opportunities at the Facility for Rare Isotope Beams which is currently under construction.

  5. 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop: April 5-7, 2011

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    The U.S. marine energy industry is actively pursuing development of offshore wind and marine hydrokinetic (MHK) energy systems. Experience in the wind energy sector demonstrates that new technology development requires thorough measurement and characterization of the environmental conditions prevalent at installation sites and of technology operating in the field. Presently, there are no turn-key instrumentation system solutions that meet the measurement needs of the marine energy industry. The 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop brought together technical experts from government laboratories, academia, and industry representatives from marine energy, wind, offshore oil and gas, and instrumentation developers to present and discuss the instrumentation needs of the marine energy industry. The goals of the meeting were to: (1) Share the latest relevant knowledge among technical experts; (2) Review relevant state-of-the-art field measurement technologies and methods; (3) Review lessons learned from recent field deployments; (4) Identify synergies across different industries; (5) Identify gaps between existing and needed instrumentation capabilities; (6) Understand who are the leading experts; (7) Provide a forum where stakeholders from the marine energy industry could provide substantive input in the development of new marine energy field deployable instrumentation packages.

  6. Transformative Experiences

    E-Print Network [OSTI]

    Gering, Jon C.

    Transformative Experiences Internships & Field Schools Honors & Research Faculty Notables Alumni have at least one poten- tially transformative experi- ence - an opportunity to de- sign and carry out to be transformational are study abroad, internships, service learning, research, student-led learning, and lead- ership

  7. Utilities and offsites design baseline. Outside Battery Limits Facility 6000 tpd SRC-I Demonstration Plant. Volume 1

    SciTech Connect (OSTI)

    None

    1984-05-25

    As part of the overall Solvent Refined Coal (SRC-1) project baseline being prepared by International Coal Refining Company (ICRC), the RUST Engineering Company is providing necessary input for the Outside Battery Limits (OSBL) Facilities. The project baseline is comprised of: design baseline - technical definition of work; schedule baseline - detailed and management level 1 schedules; and cost baseline - estimates and cost/manpower plan. The design baseline (technical definition) for the OSBL Facilities has been completed and is presented in Volumes I, II, III, IV, V and VI. The OSBL technical definition is based on, and compatible with, the ICRC defined statement of work, design basis memorandum, master project procedures, process and mechanical design criteria, and baseline guidance documents. The design basis memorandum is included in Paragraph 1.3 of Volume I. The baseline design data is presented in 6 volumes. Volume I contains the introduction section and utility systems data through steam and feedwater. Volume II continues with utility systems data through fuel system, and contains the interconnecting systems and utility system integration information. Volume III contains the offsites data through water and waste treatment. Volume IV continues with offsites data, including site development and buildings, and contains raw materials and product handling and storage information. Volume V contains wastewater treatment and solid wastes landfill systems developed by Catalytic, Inc. to supplement the information contained in Volume III. Volume VI contains proprietary information of Resources Conservation Company related to the evaporator/crystallizer system of the wastewater treatment area.

  8. The NOvA Experiment: Status and Outlook

    E-Print Network [OSTI]

    R. B. Patterson; for the NOvA Collaboration

    2012-09-04

    The NOvA long-baseline neutrino oscillation experiment is currently under construction and will use an upgraded NuMI neutrino source at Fermilab and a 14-kton detector at Ash River, Minnesota to explore the neutrino sector. NOvA uses a highly active, finely segmented detector design that offers superb event identification capability, allowing precision measurements of \

  9. The CAPTAIN liquid argon neutrino experiment

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, Qiuguang

    2015-01-01

    The CAPTAIN liquid argon experiment is designed to make measurements of scientific importance to long-baseline neutrino physics and physics topics that will be explored by large underground detectors. The experiment employs two detectors – a primary detector with approximately 10-ton of liquid argon that will be deployed at different facilities for physics measurements and a prototype detector with 2-ton of liquid argon for configuration testing. The physics programs for CAPTAIN include measuring neutron interactions at Los Alamos Neutron Science Center, measuring neutrino interactions in medium energy regime (1.5–5 GeV) at Fermilab's NuMI beam, and measuring neutrino interactions in low energymore »regime (« less

  10. GILK: A dynamic instrumentation tool for the Linux Kernel

    E-Print Network [OSTI]

    Pearce, David J.

    GILK: A dynamic instrumentation tool for the Linux Kernel A. Nonymous, B. Nonymous, C.Nonymous No Institute Given Abstract. This document describes a novel instrumentation tool for the Linux Kernel function, and insert user-speci#12;ed instrumentation before or after any basic block. The instruments

  11. Authorized Investigator's Laboratory Survey Record Room Diagram and Survey Instruments

    E-Print Network [OSTI]

    Sniadecki, Nathan J.

    . 4) All records must be available for inspection and kept for 3 calendar years. Survey InstrumentsAuthorized Investigator's Laboratory Survey Record Room Diagram and Survey Instruments u Instrument Code * Model # Serial # Type Action Level Instrument action level is twice the bkg count

  12. Aspect-Oriented Instrumentation with GCC Justin Seyster1

    E-Print Network [OSTI]

    Grosu, Radu

    the detailed type information that is available in GIMPLE. Implementing instrumentation tools as GCC plugAspect-Oriented Instrumentation with GCC Justin Seyster1 , Ketan Dixit1 , Xiaowan Huang1 , Radu for runtime instrumentation, as GCC plug-ins can directly add instrumentation by transforming the compiler

  13. Instrumenting Executables for Dynamic Analysis Jeff Perkins and Michael Ernst

    E-Print Network [OSTI]

    Ernst, Michael

    Instrumenting Executables for Dynamic Analysis Jeff Perkins and Michael Ernst MIT CSAIL 14 Nov 2005 09:45Page 1 Jeff PerkinsInstrumenting Executables for Dynamic Analysis #12;Compiled Instrumentation:45Page 2 Jeff PerkinsInstrumenting Executables for Dynamic Analysis #12;Source to Source Easy to create

  14. Recognition of Instrument Timbres in Real Polytimbral Audio Recordings

    E-Print Network [OSTI]

    Ras, Zbigniew W.

    Recognition of Instrument Timbres in Real Polytimbral Audio Recordings Elzbieta Kubera1,2 , Alicja. Automatic recognition of multiple musical instruments in polyphonic and polytimbral music is a difficult instruments. This paper tests recog- nition of instruments in real recordings, using a recognition system

  15. Free-piston Stirling engine experimental program: Part 1. Baseline test summary

    SciTech Connect (OSTI)

    Berggren, R.; Moynihan, T.

    1983-06-01

    Free-Piston Stirling Engine experimental data are presented from a series of tests that establish the operating characteristics of the engine and determine performance repeatability. The operating envelope of the engine was to determine maximum parameter range and repeatability. Tests were then carried out in which individual operating parameters were varied while others were maintained constant. These data establish the baseline operation of the engine as a preliminary to a series of tests in which several suspected sources of energy loss are investigated by changing the engine geometry to isolate and magnify each suspected loss mechanism. Performance with the geometry change is compared against baseline operation to quantify the magnitude of the loss mechanism under investigation. The results of the loss mechanism investigation are presented in Part 2 of this report.

  16. Improving the nonlinear performance of the HEPS baseline design with genetic algorithm

    E-Print Network [OSTI]

    Jiao, Yi

    2015-01-01

    The baseline design for the High Energy Photon Source has been proposed, with an emittance of 60 pm.rad within a circumference of 1.3 kilometers. Nevertheless, the nonlinear performance of the design needs further improvements to enlarge both the dynamic aperture and the momentum acceptance. In this study, genetic optimization of the linear optics is performed, so as to find all the possible solutions with weaker sextupoles and hence weaker nonlinearities, while keeping the emittance at the same level as the baseline design. These obtained solutions enable us to explore the dependence of nonlinear dynamics on the working point. The result indicates that with the same layout, it is feasible to obtain much better nonlinear performance with a delicate tuning of the magnetic field strengths and a wise choice of the working point.

  17. Level 3 Baseline Risk Assessment for Building 3515 at Oak Ridge National Lab., Oak Ridge, TN

    SciTech Connect (OSTI)

    Wollert, D.A.; Cretella, F.M.; Golden, K.M.

    1995-08-01

    The baseline risk assessment for the Fission Product Pilot Plant (Building 3515) at the Oak Ridge National laboratory (ORNL) provides the Decontamination and Decommissioning (D&D) Program at ORNL and Building 3515 project managers with information concerning the results of the Level 3 baseline risk assessment performed for this building. The document was prepared under Work Breakdown Structure 1.4.12.6.2.01 (Activity Data Sheet 3701, Facilities D&D) and includes information on the potential long-term impacts to human health and the environment if no action is taken to remediate Building 3515. Information provided in this document forms the basis for the development of remedial alternatives and the no-action risk portion of the Engineering Evaluation/Cost Analysis report.

  18. Testing the universality of free fall with rubidium and ytterbium in a very large baseline atom interferometer

    E-Print Network [OSTI]

    Jonas Hartwig; Sven Abend; Christian Schubert; Dennis Schlippert; Holger Ahlers; Katerine Posso-Trujillo; Naceur Gaaloul; Wolfgang Ertmer; Ernst M. Rasel

    2015-03-04

    We propose a very long baseline atom interferometer test of Einstein's equivalence principle (EEP) with ytterbium and rubidium extending over 10m of free fall. In view of existing parametrizations of EEP violations, this choice of test masses significantly broadens the scope of atom interferometric EEP tests with respect to other performed or proposed tests by comparing two elements with high atomic numbers. In a first step, our experimental scheme will allow reaching an accuracy in the E\\"otv\\"os ratio of $7\\times 10^{-13}$. This achievement will constrain violation scenarios beyond our present knowledge and will represent an important milestone for exploring a variety of schemes for further improvements of the tests as outlined in the paper. We will discuss the technical realisation in the new infrastructure of the Hanover Institute of Technology (HITec) and give a short overview of the requirements to reach this accuracy. The experiment will demonstrate a variety of techniques which will be employed in future tests of EEP, high accuracy gravimetry and gravity-gradiometry. It includes operation of a force sensitive atom interferometer with an alkaline earth like element in free fall, beam splitting over macroscopic distances and novel source concepts.

  19. Results from baseline tests of the SPRE I and comparison with code model predictions

    SciTech Connect (OSTI)

    Cairelli, J.E.; Geng, S.M.; Skupinski, R.C.

    1994-09-01

    The Space Power Research Engine (SPRE), a free-piston Stirling engine with linear alternator, is being tested at the NASA Lewis Research Center as part of the Civil Space Technology Initiative (CSTI) as a candidate for high capacity space power. This paper presents results of base-line engine tests at design and off-design operating conditions. The test results are compared with code model predictions.

  20. Mixed waste focus area integrated technical baseline report. Phase I, Volume 2: Revision 0

    SciTech Connect (OSTI)

    1996-01-16

    This document (Volume 2) contains the Appendices A through J for the Mixed Waste Focus Area Integrated Technical Baseline Report Phase I for the Idaho National Engineering Laboratory. Included are: Waste Type Managers` Resumes, detailed information on wastewater, combustible organics, debris, unique waste, and inorganic homogeneous solids and soils, and waste data information. A detailed list of technology deficiencies and site needs identification is also provided.

  1. Integrated Baseline System (IBS). Version 2.0, System Management Guide

    SciTech Connect (OSTI)

    Williams, J.R. [Pacific Northwest Lab., Richland, WA (United States); Bower, J.C. [Bower Software Services, Kennewick, WA (United States)

    1994-03-01

    The Integrated Baseline System (IBS) is an emergency management planning and analysis tool being developed under the direction of the US Army Nuclear and Chemical Agency. This User Guide explains how to start and use the IBS program, which is designed to help civilian emergency management personnel to plan for and support their responses to a chemical-releasing event at a military chemical stockpile. The intended audience for this document is all users of the IBS, especially emergency management planners and analysts.

  2. Tank waste remediation system retrieval and disposal mission initial updated baseline summary

    SciTech Connect (OSTI)

    Swita, W.R.

    1998-01-09

    This document provides a summary of the Tank Waste Remediation System (TWRS) Retrieval and Disposal Mission Initial Updated Baseline (scope, schedule, and cost), developed to demonstrate Readiness-to-Proceed (RTP) in support of the TWRS Phase 1B mission. This Updated Baseline is the proposed TWRS plan to execute and measure the mission work scope. This document and other supporting data demonstrate that the TWRS Project Hanford Management Contract (PHMC) team is prepared to fully support Phase 1B by executing the following scope, schedule, and cost baseline activities: Deliver the specified initial low-activity waste (LAW) and high-level waste (HLW) feed batches in a consistent, safe, and reliable manner to support private contractors` operations starting in June 2002; Deliver specified subsequent LAW and HLW feed batches during Phase 1B in a consistent, safe, and reliable manner; Provide for the interim storage of immobilized HLW (IHLW) products and the disposal of immobilized LAW (ILAW) products generated by the private contractors; Provide for disposal of byproduct wastes generated by the private contractors; and Provide the infrastructure to support construction and operations of the private contractors` facilities.

  3. Circular polarization control for the LCLS baseline in the soft X-ray regime

    E-Print Network [OSTI]

    Geloni, Gianluca; Saldin, Evgeni

    2010-01-01

    The LCLS baseline includes a planar undulator system, producing linearly polarized light in the range 0.15-1.5 nm. Polarization control in the soft X-ray region from linear to circular is highly desirable. Several schemes using helical undulators have been discussed for the LCLS. One consists in replacing three of the last planar undulator segments by APPLE III. A second proposal, the 2nd harmonic helical afterburner, uses short, crossed undulators tuned to the second harmonic. This last scheme is expected to be the better one. Its advantages are a high and stable degree of circular polarization and a low cost. Its disadvantage is a small output power and a narrow wavelength range. We propose a novel method to generate 10 GW level power at the fundamental harmonic with 99% degree of circular polarization from the LCLS baseline. Its merits are low cost, simplicity and easy implementation. After the baseline undulator, the electron beam is sent through a 40 m long straight section, and subsequently passes throu...

  4. PLC/DTAM Software Programs for Pumping Instrumentation & Control Skid X

    SciTech Connect (OSTI)

    HORNER, T.M.

    2001-07-30

    This document describes the software programs for the Allen-Bradley SLC 500 programmable logic controller (PLC) and the Allen-Bradley DTAM PLUS operator interface module used on Pumping Instrumentation and Control (PIC) skid ''X''. The software programs for the SLC 500 and DTAM Plus are based on the core programs provided by Allen-Bradley. The PLC and DTAM software programs on skid ''D'' for SX-104 are the baseline programs. These baselines will be tailored for each individual BY-farm skid. An Acceptance Test Procedure (ATP) and an Operational Test Procedure (OTP) verify that the software programs meet the specific requirements for BY-105 pumping. This document represents the final PLC and DTAM programs for PIC skid ''X'' at BY-105. These programs were printed out after the performance of the OTP. The OTP acts as the final qualification test for the software programs. Functional requirements and details of the PLC ladder logic are described in this document. The final programs entered into the PLC and DTAM Plus are included as Appendices to this document.

  5. PLC/DTAM Software Programs for Pumping Instrumentation & Control Skid U

    SciTech Connect (OSTI)

    HORNER, T.M.

    2001-08-01

    This document describes the software programs for the Allen-Bradley SLC 500 programmable logic controller (PLC) and the Allen-Bradley DTAM PLUS operator interface module used on Pumping Instrumentation and Control (PIC) skid ''U''. The software programs for the SLC 500 and DTAM Plus are based on the core programs provided by Allen-Bradley. The PLC and DTAM software programs on skid ''D'' for SX-104 are the baseline programs. These baselines will be tailored for each individual BY-farm skid. An Acceptance Test Procedure (ATP) and an Operational Test Procedure (OTP) verify that the software programs meet the specific requirements for BY-106 pumping. This document represents the final PLC and DTAM programs for PIC skid ''U'' at BY-106. These programs were printed out after the performance of the OTP. The OTP acts as the final qualification test for the software programs. Functional requirements and details of the PLC ladder logic are described in this document. The final programs entered into the PLC and DTAM Plus are included as Appendices to this document.

  6. IMTC 2005 -Instrumentation and Measurement Technology Conference

    E-Print Network [OSTI]

    Clark, James J.

    IMTC 2005 - Instrumentation and Measurement Technology Conference Ottawa, Ontario, canada, May 17 components of a database of previously measured spectra. Such a database is not always available, however is available, it might not be consistent with, or representative of, the data present in a given application

  7. IMTC 2005 Instrumentation and Measurement Technology Conference

    E-Print Network [OSTI]

    Payeur, Pierre

    IMTC 2005 ­ Instrumentation and Measurement Technology Conference Ottawa, Canada, 17-19 May 2005 the currently available sensor technologies. The primary problem comes from the fact that laser range sensors the availability of system integration is non-existent, which reduces or inconveniences the possibility

  8. Instrumenting Home Networks Kenneth L. Calvert

    E-Print Network [OSTI]

    Grinter, Rebecca Elizabeth

    Instrumenting Home Networks Kenneth L. Calvert Lab for Advanced Networking University of Kentucky is actually happening. Availability of a record of events that occurred on the home network before trouble is generally only available via a Web interface, making it difficult to build tools that leverage the log data

  9. Instrumenting Home Networks Kenneth L. Calvert

    E-Print Network [OSTI]

    Edwards, Keith

    Instrumenting Home Networks Kenneth L. Calvert Lab for Advanced Networking University of Kentucky home networks, one of the challenges is in knowing what is actually happening. Avail- ability available via a web in- terface, making it difficult to build tools that leverage the log data they do have

  10. Cooling the dark energy camera instrument

    SciTech Connect (OSTI)

    Schmitt, R.L.; Cease, H.; DePoy, D.; Diehl, H.T.; Estrada, J.; Flaugher, B.; Kuhlmann, S.; Onal, Birce; Stefanik, A.; /Fermilab

    2008-06-01

    DECam, camera for the Dark Energy Survey (DES), is undergoing general design and component testing. For an overview see DePoy, et al in these proceedings. For a description of the imager, see Cease, et al in these proceedings. The CCD instrument will be mounted at the prime focus of the CTIO Blanco 4m telescope. The instrument temperature will be 173K with a heat load of 113W. In similar applications, cooling CCD instruments at the prime focus has been accomplished by three general methods. Liquid nitrogen reservoirs have been constructed to operate in any orientation, pulse tube cryocoolers have been used when tilt angles are limited and Joule-Thompson or Stirling cryocoolers have been used with smaller heat loads. Gifford-MacMahon cooling has been used at the Cassegrain but not at the prime focus. For DES, the combined requirements of high heat load, temperature stability, low vibration, operation in any orientation, liquid nitrogen cost and limited space available led to the design of a pumped, closed loop, circulating nitrogen system. At zenith the instrument will be twelve meters above the pump/cryocooler station. This cooling system expected to have a 10,000 hour maintenance interval. This paper will describe the engineering basis including the thermal model, unbalanced forces, cooldown time, the single and two-phase flow model.

  11. Integrated polymerase chain reaction/electrophoresis instrument

    DOE Patents [OSTI]

    Andresen, Brian D. (Livermore, CA)

    2000-01-01

    A new approach and instrument for field identification of micro-organisms and DNA fragments using a small and disposable device containing integrated polymerase chain reaction (PCR) enzymatic reaction wells, attached capillary electrophoresis (CE) channels, detectors, and read-out all on/in a small hand-held package. The analysis instrument may be made inexpensively, for example, of plastic, and thus is disposable, which minimizes cross contamination and the potential for false positive identification between samples. In addition, it is designed for multiple users with individual applications. The integrated PCR/CE is manufactured by the PCR well and CE channels are "stamped" into plastic depressions where conductive coatings are made in the wells and ends of the CE microchannels to carry voltage and current to heat the PCR reaction mixtures and simultaneously draw DNA bands up the CE channels. Light is transmitted through the instrument at appropriate points and detects PCR bands and identifies DNA fragments by size (retention time) and quantifies each by the amount of light generated as each phototransistor positioned below each CE channel detects a passing band. The instrument is so compact that at least 100 PCR/CE reactions/analyses can be performed easily on one detection device.

  12. Positron Emission Tomography Physics, Instrumentation, Data Analysis

    E-Print Network [OSTI]

    Liu, Thomas T.

    1 Positron Emission Tomography Physics, Instrumentation, Data Analysis Carl K. Hoh, MD Department PET Scanner Design · Smaller individual crystal size = better spatial resolution · Physical limit HR scanner = 24 elements in axial FOV.Axial FOV = 15 cm 2D and 3D Detector Configurations · 2D mode

  13. Instrumented Home Energy Rating and Commissioning

    E-Print Network [OSTI]

    Secretary for Energy Efficiency and Renewable Energy, Building Technologies Program, of the U.S. DepartmentLBNL-52216 Instrumented Home Energy Rating and Commissioning Craig Wray, Iain Walker, Max Sherman Environmental Energy Technologies Division Indoor Environment Department Lawrence Berkeley National Laboratory

  14. ACRF Instrumentation Status: New, Current, and Future August 2006

    SciTech Connect (OSTI)

    JC Liljegren

    2006-08-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development. New information is highlighted in blue text.

  15. ACRF Instrumentation Status: New, Current, and Future - June 2008

    SciTech Connect (OSTI)

    JW Voyles

    2008-07-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  16. ACRF Instrumentation Status: New, Current, and Future - August 2008

    SciTech Connect (OSTI)

    JW Voyles

    2008-09-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  17. ACRF Instrumentation Status: New, Current, and Future - January 2009

    SciTech Connect (OSTI)

    JW Voyles

    2009-03-02

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  18. ACRF Instrumentation Status: New, Current, and Future September 2006

    SciTech Connect (OSTI)

    JC Liljegren

    2006-09-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development. New information is highlighted in blue text.

  19. ACRF Instrumentation Status: New, Current, and Future - July 2008

    SciTech Connect (OSTI)

    JW Voyles

    2008-07-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  20. ACRF Instrumentation Status: New, Current, and Future - April 2008

    SciTech Connect (OSTI)

    JW Voyles

    2008-05-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  1. ACRF Instrumentation Status: New, Current, and Future - December 2008

    SciTech Connect (OSTI)

    JW Voyles

    2009-01-15

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  2. ACRF Instrumentation Status: New, Current, and Future - October 2008

    SciTech Connect (OSTI)

    JW Voyles

    2008-10-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  3. ACRF Instrumentation Status: New, Current, and Future - May 2008

    SciTech Connect (OSTI)

    JW Voyles

    2008-05-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  4. ACRF Instrumentation Status: New, Current, and Future July 2006

    SciTech Connect (OSTI)

    JC Liljegren

    2006-07-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development. New information is highlighted in blue text.

  5. ACRF Instrumentation Status: New, Current, and Future March 2009

    SciTech Connect (OSTI)

    JW Voyles

    2009-03-15

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  6. ACRF Instrumentation Status: New, Current, and Future February 2009

    SciTech Connect (OSTI)

    JW Voyles

    2009-02-15

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  7. ACRF Instrumentation Status: New, Current, and Future - November 2008

    SciTech Connect (OSTI)

    JW Voyles

    2008-12-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  8. ACRF Instrumentation Status: New, Current, and Future - September 2008

    SciTech Connect (OSTI)

    JW Voyles

    2008-10-15

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  9. ARM Climate Research Facility Monthly Instrument Report September 2010

    SciTech Connect (OSTI)

    Voyles, JW

    2010-10-18

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

  10. NSF's MAJOR RESEARCH INSTRUMENTATION (MRI) Program The Major Research Instrumentation Program (MRI) serves to increase access to shared scientific and

    E-Print Network [OSTI]

    Finley Jr., Russell L.

    NSF's MAJOR RESEARCH INSTRUMENTATION (MRI) Program The Major Research Instrumentation Program (MRI) serves to increase access to shared scientific and engineering instruments for research and research to acquire major instrumentation that supports the research and research training goals of the organization

  11. Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube

    DOE Patents [OSTI]

    Obermeyer, F.D.

    1993-11-16

    Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube, so that the threaded ends of the instrumentation tube do not unthread when subjected to vibration, such an instrumentation tube being suitable for use in a nuclear reactor pressure vessel. The instrumentation tube has a first member having a threaded end portion that has a plurality of first holes circumferentially around the outside surface thereof. The instrumentation tube also has a second member having a threaded end portion that has a plurality of second holes circumferentially around the outside surface thereof. The threads of the second member are caused to threadably engage the threads of the first member for defining a threaded joint there between. A sleeve having an inside surface surrounds the end portion of the first member and the end portion of the second member and thus surrounds the threaded joint. The sleeve includes a plurality of first projections and second projections that outwardly extend from the inside surface to engage the first holes and the second holes, respectively. The outside surface of the sleeve is crimped or swaged at the locations of the first projections and second projections such that the first projections and the second projections engage their respective holes. In this manner, independent rotation of the first member with respect to the second member is prevented, so that the instrumentation tube will not unthread at its threaded joint. 10 figures.

  12. The CAPTAIN Experiment

    E-Print Network [OSTI]

    Jianming Bian

    2015-09-25

    The Cryogenic Apparatus for Precision Tests of Argon Interactions with Neutrinos (CAPTAIN) program is designed to make measurements of scientific importance to long-baseline neutrino physics and physics topics that will be explored by large underground detectors. The experiment employs two liquid Argon time projection chambers (LArTPCs), a primary detector with a mass of approximately 10 ton that will be deployed at different facilities for physics measurements and a two ton prototype detector for configuration testing. The physics programs for CAPTAIN include measuring neutron interactions at the Los Alamos Neutron Science Center, measuring neutrino interactions in the high-energy regime (1.5-5 GeV) at Fermilab NuMI beam, and measuring neutrino interactions in the low-energy regime (UV laser track has been seen in its TPC. This paper gives an overview of the CAPTAIN program and reports the status of the commissioning. The up-to-date detector design and running plans are also described.

  13. SLAC All Access: Atomic, Molecular and Optical Science Instrument

    ScienceCinema (OSTI)

    Bozek, John

    2014-06-03

    John Bozek, a staff scientist at SLAC's Linac Coherent Light Source (LCLS) X-ray laser who manages the LCLS Soft X-ray Department, takes us behind the scenes at the Atomic, Molecular and Optical Science (AMO) instrument, the first of six experimental stations now operating at LCLS. Samples used in AMO experiments include atoms, molecules, clusters, and nanoscale objects such as protein crystals or viruses. Science performed at AMO includes fundamental studies of light-matter interactions in the extreme X-ray intensity of the LCLS pules, time-resolved studies of increasingly charged states of atoms and molecules, X-ray diffraction imaging of nanocrystals, and single-shot imaging of a variety of objects.

  14. The U.S./IAEA Workshop on Software Sustainability for Safeguards Instrumentation

    SciTech Connect (OSTI)

    Pepper S. E.; .; Worrall, L.; Pickett, C.; Bachner, K.; Queirolo, A.

    2014-08-08

    The U.S. National Nuclear Security Administration’s Next Generation Safeguards Initiative, the U.S. Department of State, and the International Atomic Energy Agency (IAEA) organized a a workshop on the subject of ”Software Sustainability for Safeguards Instrumentation.” The workshop was held at the Vienna International Centre in Vienna, Austria, May 6-8, 2014. The workshop participants included software and hardware experts from national laboratories, industry, government, and IAEA member states who were specially selected by the workshop organizers based on their experience with software that is developed for the control and operation of safeguards instrumentation. The workshop included presentations, to orient the participants to the IAEA Department of Safeguards software activities related to instrumentation data collection and processing, and case studies that were designed to inspire discussion of software development, use, maintenance, and upgrades in breakout sessions and to result in recommendations for effective software practices and management. This report summarizes the results of the workshop.

  15. Ultrasonic unipolar pulse/echo instrument

    DOE Patents [OSTI]

    Hughes, Michael S. (Ames, IA); Hsu, David K. (Ames, IA); Thompson, Donald O. (Ames, IA); Wormley, Samuel J. (Ames, IA)

    1993-01-01

    An ultrasonic unipolar pulse/echo instrument uses active switches and a timing and drive circuitry to control electrical energy to a transducer, the discharging of the transducer, and the opening of an electrical pathway to the receiving circuitry for the returning echoes. The active switches utilize MOSFET devices along with decoupling circuitry to insure the preservation of the unipolar nature of the pulses, insure fast transition times, and maintain broad band width and time resolution. A housing contains the various circuitry and switches and allows connection to a power supply and a movable ultrasonic transducer. The circuitry maintains low impedance input to the transducer during transmitting cycles, and high impedance between the transducer and the receiving circuit during receive cycles to maintain the unipolar pulse shape. A unipolar pulse is valuable for nondestructive evaluation, a prime use for the present instrument.

  16. Ultrasonic unipolar pulse/echo instrument

    DOE Patents [OSTI]

    Hughes, M.J.; Hsu, D.K.; Thompson, D.O.; Wormley, S.J.

    1993-04-06

    An ultrasonic unipolar pulse/echo instrument uses active switches and a timing and drive circuitry to control electrical energy to a transducer, the discharging of the transducer, and the opening of an electrical pathway to the receiving circuitry for the returning echoes. The active switches utilize MOSFET devices along with decoupling circuitry to insure the preservation of the unipolar nature of the pulses, insure fast transition times, and maintain broad band width and time resolution. A housing contains the various circuitry and switches and allows connection to a power supply and a movable ultrasonic transducer. The circuitry maintains low impedance input to the transducer during transmitting cycles, and high impedance between the transducer and the receiving circuit during receive cycles to maintain the unipolar pulse shape. A unipolar pulse is valuable for nondestructive evaluation, a prime use for the present instrument.

  17. ICFA instrumentation bulletin, Volume 15, Fall 1997

    SciTech Connect (OSTI)

    Va'vra, J. [ed.

    1997-12-01

    The Bulletin reports on research and progress in the field of instrumentation with emphasis in the field of high-energy physics. This volume contains the following four papers: (1) Streamers in MSGC's and Other Gaseous Detectors; (2) Soft X-Ray Production in Spark Discharges in Hydrogen, Nitrogen, Air, Argon, and Xenon Gases; (3) Beam Tests of the CLEO III LiF-TEA Ring Imaging Cherenkov Detector; and (4) Electron Multiplication and Secondary Scintillation in Liquid Xenon: New Prospects.

  18. Lawrence Livermore National Laboratory Emergency Response Capability Baseline Needs Assessment Requirement Document

    SciTech Connect (OSTI)

    Sharry, J A

    2009-12-30

    This revision of the LLNL Fire Protection Baseline Needs Assessment (BNA) was prepared by John A. Sharry, LLNL Fire Marshal and LLNL Division Leader for Fire Protection and reviewed by Martin Gresho, Sandia/CA Fire Marshal. The document follows and expands upon the format and contents of the DOE Model Fire Protection Baseline Capabilities Assessment document contained on the DOE Fire Protection Web Site, but only address emergency response. The original LLNL BNA was created on April 23, 1997 as a means of collecting all requirements concerning emergency response capabilities at LLNL (including response to emergencies at Sandia/CA) into one BNA document. The original BNA documented the basis for emergency response, emergency personnel staffing, and emergency response equipment over the years. The BNA has been updated and reissued five times since in 1998, 1999, 2000, 2002, and 2004. A significant format change was performed in the 2004 update of the BNA in that it was 'zero based.' Starting with the requirement documents, the 2004 BNA evaluated the requirements, and determined minimum needs without regard to previous evaluations. This 2010 update maintains the same basic format and requirements as the 2004 BNA. In this 2010 BNA, as in the previous BNA, the document has been intentionally divided into two separate documents - the needs assessment (1) and the compliance assessment (2). The needs assessment will be referred to as the BNA and the compliance assessment will be referred to as the BNA Compliance Assessment. The primary driver for separation is that the needs assessment identifies the detailed applicable regulations (primarily NFPA Standards) for emergency response capabilities based on the hazards present at LLNL and Sandia/CA and the geographical location of the facilities. The needs assessment also identifies areas where the modification of the requirements in the applicable NFPA standards is appropriate, due to the improved fire protection provided, the remote location and low population density of some the facilities. As such, the needs assessment contains equivalencies to the applicable requirements. The compliance assessment contains no such equivalencies and simply assesses the existing emergency response resources to the requirements of the BNA and can be updated as compliance changes independent of the BNA update schedule. There are numerous NFPA codes and standards and other requirements and guidance documents that address the subject of emergency response. These requirements documents are not always well coordinated and may contain duplicative or conflicting requirements or even coverage gaps. Left unaddressed, this regulatory situation results in frequent interpretation of requirements documents. Different interpretations can then lead to inconsistent implementation. This BNA addresses this situation by compiling applicable requirements from all identified sources (see Section 5) and analyzing them collectively to address conflict and overlap as applicable to the hazards presented by the LLNL and Sandia/CA sites (see Section 7). The BNA also generates requirements when needed to fill any identified gaps in regulatory coverage. Finally, the BNA produces a customized simple set of requirements, appropriate for the DOE protection goals, such as those defined in DOE O 420.1B, the hazard level, the population density, the topography, and the site layout at LLNL and Sandia/CA that will be used as the baseline requirements set - the 'baseline needs' - for emergency response at LLNL and Sandia/CA. A template approach is utilized to accomplish this evaluation for each of the nine topical areas that comprise the baseline needs for emergency response. The basis for conclusions reached in determining the baseline needs for each of the topical areas is presented in Sections 7.1 through 7.9. This BNA identifies only mandatory requirements and establishes the minimum performance criteria. The minimum performance criteria may not be the level of performance desired Lawrence Livermore National Laboratory or Sandia/CA

  19. The mixed waste management facility. Project baseline revision 1.2

    SciTech Connect (OSTI)

    Streit, R.D.; Throop, A.L.

    1995-04-01

    Revision 1.2 to the Project Baseline (PB) for the Mixed Waste Management Facility (MWMF) is in response to DOE directives and verbal guidance to (1) Collocate the Decontamination and Waste Treatment Facility (DWTF) and MWMF into a single complex, integrate certain and overlapping functions as a cost-saving measure; (2) Meet certain fiscal year (FY) new-BA funding objectives ($15.3M in FY95) with lower and roughly balanced funding for out years; (3) Reduce Total Project Cost (TPC) for the MWMF Project; (4) Include costs for all appropriate permitting activities in the project TPC. This baseline revision also incorporates revisions in the technical baseline design for Molten Salt Oxidation (MSO) and Mediated Electrochemical Oxidation (MEO). Changes in the WBS dictionary that are necessary as a result of this rebaseline, as well as minor title changes, at WBS Level 3 or above (DOE control level) are approved as a separate document. For completeness, the WBS dictionary that reflects these changes is contained in Appendix B. The PB, with revisions as described in this document, were also the basis for the FY97 Validation Process, presented to DOE and their reviewers on March 21-22, 1995. Appendix C lists information related to prior revisions to the PB. Several key changes relate to the integration of functions and sharing of facilities between the portion of the DWTF that will house the MWMF and those portions that are used by the Hazardous Waste Management (HWM) Division at LLNL. This collocation has been directed by DOE as a cost-saving measure and has been implemented in a manner that maintains separate operational elements from a safety and permitting viewpoint. Appendix D provides background information on the decision and implications of collocating the two facilities.

  20. Formation and Sustainment of ITPs in ITER with the Baseline Heating Mix

    SciTech Connect (OSTI)

    Francesca M. Poli and Charles Kessel

    2012-12-03

    Plasmas with internal transport barriers (ITBs) are a potential and attractive route to steady-state operation in ITER. These plasmas exhibit radially localized regions of improved con nement with steep pressure gradients in the plasma core, which drive large bootstrap current and generate hollow current pro les and negative shear. This work examines the formation and sustainment of ITBs in ITER with electron cyclotron heating and current drive. It is shown that, with a trade-o of the power delivered to the equatorial and to the upper launcher, the sustainment of steady-state ITBs can be demonstrated in ITER with the baseline heating con guration.

  1. Energy baseline and energy efficiency resource opportunities for the Forest Products Laboratory, Madison, Wisconsin

    SciTech Connect (OSTI)

    Mazzucchi, R.P.; Richman, E.E.; Parker, G.B.

    1993-08-01

    This report provides recommendations to improve the energy use efficiency at the Forest Products Laboratory in Madison, Wisconsin. The assessment focuses upon the four largest buildings and central heating plant at the facility comprising a total of approximately 287,000 square feet. The analysis is comprehensive in nature, intended primarily to determine what if any energy efficiency improvements are warranted based upon the potential for cost-effective energy savings. Because of this breadth, not all opportunities are developed in detail; however, baseline energy consumption data and energy savings concepts are described to provide a foundation for detailed investigation and project design where warranted.

  2. Baseline Risk Assessment Supporting Closure at Waste Management Area C at the Hanford Site Washington - 15332

    SciTech Connect (OSTI)

    Singleton, Kristin M.

    2015-01-07

    The Office of River Protection under the U.S. Department of Energy is pursuing closure of the Single-Shell Tank (SST) Waste Management Area (WMA) C under the requirements of the Hanford Federal Facility Agreement and Consent Order (HFFACO). A baseline risk assessment (BRA) of current conditions is based on available characterization data and information collected at WMA C. The baseline risk assessment is being developed as a part of a Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI)/Corrective Measures Study (CMS) at WMA C that is mandatory under Comprehensive Environmental Response, Compensation, and Liability Act and RCRA corrective action. The RFI/CMS is needed to identify and evaluate the hazardous chemical and radiological contamination in the vadose zone from past releases of waste from WMA C. WMA C will be under Federal ownership and control for the foreseeable future, and managed as an industrial area with restricted access and various institutional controls. The exposure scenarios evaluated under these conditions include Model Toxics Control Act (MTCA) Method C, industrial worker, maintenance and surveillance worker, construction worker, and trespasser scenarios. The BRA evaluates several unrestricted land use scenarios (residential all-pathway, MTCA Method B, and Tribal) to provide additional information for risk management. Analytical results from 13 shallow zone (0 to 15 ft. below ground surface) sampling locations were collected to evaluate human health impacts at WMA C. In addition, soil analytical data were screened against background concentrations and ecological soil screening levels to determine if soil concentrations have the potential to adversely affect ecological receptors. Analytical data from 12 groundwater monitoring wells were evaluated between 2004 and 2013. A screening of groundwater monitoring data against background concentrations and Federal maximum concentration levels was used to determine vadose zone contamination impacts on groundwater. Waste Management Area C is the first of the Hanford tank farms to begin the closure planning process. The current baseline risk assessment will provide valuable information for making corrective actions and closure decisions for WMA C, and will also support the planning for future tank farm soil investigation and baseline risk assessments.

  3. SRC-I Project Baseline. [SRC-I demonstration project near Owensboro, Kentucky

    SciTech Connect (OSTI)

    None

    1982-03-01

    The Process Design Criteria Specification forms the basis for process design for the 6000-TPSD SRC-I Demonstration Plant. It sets forth: basic engineering data, e.g., type and size of plant, feedstocks, product specifications, and atmospheric emission and waste disposal limits; utility conditions; equipment design criteria and sparing philosophy; and estimating criteria for economic considerations. Previously the formal ICRC Document No. 0001-01-002 has been submitted to DOE and revised, as necessary, to be consistent with the SRC-I Project Baseline. Revision 6, dated 19 March 1982, 51 pages, was forwarded to DOE on 19 March 1982.

  4. Data Management Guide: Integrated Baseline System (IBS). Version 2.1

    SciTech Connect (OSTI)

    Bower, J.C. [Bower Software Services, Kennewick, Washington (United States)] Bower Software Services, Kennewick, Washington (United States); Burford, M.J.; Downing, T.R.; Moise, M.C.; Williams, J.R. [Pacific Northwest Lab., Richland, WA (United States)] Pacific Northwest Lab., Richland, WA (United States)

    1995-01-01

    The Integrated Baseline System (IBS) is an emergency management planning and analysis tool that is being developed under the direction of the US Army Nuclear and Chemical Agency (USANCA). The IBS Data Management Guide provides the background, as well as the operations and procedures needed to generate and maintain a site-specific map database. Data and system managers use this guide to manage the data files and database that support the administrative, user-environment, database management, and operational capabilities of the IBS. This document provides a description of the data files and structures necessary for running the IBS software and using the site map database.

  5. Flatback airfoil wind tunnel experiment.

    SciTech Connect (OSTI)

    Mayda, Edward A.; van Dam, C.P.; Chao, David D.; Berg, Dale E.

    2008-04-01

    A computational fluid dynamics study of thick wind turbine section shapes in the test section of the UC Davis wind tunnel at a chord Reynolds number of one million is presented. The goals of this study are to validate standard wind tunnel wall corrections for high solid blockage conditions and to reaffirm the favorable effect of a blunt trailing edge or flatback on the performance characteristics of a representative thick airfoil shape prior to building the wind tunnel models and conducting the experiment. The numerical simulations prove the standard wind tunnel corrections to be largely valid for the proposed test of 40% maximum thickness to chord ratio airfoils at a solid blockage ratio of 10%. Comparison of the computed lift characteristics of a sharp trailing edge baseline airfoil and derived flatback airfoils reaffirms the earlier observed trend of reduced sensitivity to surface contamination with increasing trailing edge thickness.

  6. IRRADIATION EXPERIMENTS &

    E-Print Network [OSTI]

    McDonald, Kirk

    IRRADIATION EXPERIMENTS & FACILITIES AT BNL: BLIP & NSLS II Peter Wanderer Superconducting MagnetV). Simultaneous irradiation and isotope production by increasing beam energy, placing irradiation target ahead of isotope production target · 117 Mev 140, 160, 180, 202 MeV · Irradiation at room temperature Alternative

  7. CONSTRAINING THE STRUCTURE OF SAGITTARIUS A*'s ACCRETION FLOW WITH MILLIMETER VERY LONG BASELINE INTERFEROMETRY CLOSURE PHASES

    E-Print Network [OSTI]

    Broderick, Avery E.

    Millimeter wave very long baseline interferometry (mm-VLBI) provides access to the emission region surrounding Sagittarius A* (Sgr A*), the supermassive black hole at the center of the Milky Way, on sub-horizon scales. ...

  8. GLOBAL VERY LONG BASELINE INTERFEROMETRY OBSERVATIONS OF THE 6.0 GHz HYDROXYL MASERS IN ONSALA 1

    E-Print Network [OSTI]

    Fish, Vincent L.

    We present global very long baseline interferometry observations of the first excited-state hydroxyl (OH) masers in the massive star-forming region Onsala 1 (ON 1). The 29 masers detected are nearly all from the 6035 MHz ...

  9. The Neutrino Mass Hierarchy from Nuclear Reactor Experiments

    E-Print Network [OSTI]

    Emilio Ciuffoli; Jarah Evslin; Xinmin Zhang

    2013-08-14

    10 years from now reactor neutrino experiments will attempt to determine which neutrino mass eigenstate is the most massive. In this letter we present the results of more than seven million detailed simulations of such experiments, studying the dependence of the probability of successfully determining the mass hierarchy upon the analysis method, the neutrino mass matrix parameters, reactor flux models, geoneutrinos and, in particular, combinations of baselines. We show that a recently reported spurious dependence of the data analysis upon the high energy tail of the reactor spectrum can be removed by using a weighted Fourier transform. We determine the optimal baselines and corresponding detector locations. For most values of the CP-violating, leptonic Dirac phase delta, a degeneracy prevents NOvA and T2K from determining either delta or the hierarchy. We determine the confidence with which a reactor experiment can determine the hierarchy, breaking the degeneracy.

  10. Protecting Kernels from Untrusted Modules using Dynamic Binary Instrumentation

    E-Print Network [OSTI]

    Goel, Ashvin

    Protecting Kernels from Untrusted Modules using Dynamic Binary Instrumentation University · virtualization · Secure only modules whose source code is available (BGI, · LXFI, etc.) · Many modules is manageable · Data consistency is challenging Dynamic Binary Instrumentation Goals and Approach Challenges Two

  11. Shimadzu Center for Advanced Analytical Chemistry Instrument Description

    E-Print Network [OSTI]

    Chrzanowski, Thomas H.

    Shimadzu Center for Advanced Analytical Chemistry Instrument Description LCMS-8080 High PerformanceImagingandDocumentation Instrument Fall 2013 Allegra 25R Beckman Coulter Refrigerated Centrifuge Fall 2013 Center for Environmental

  12. Instrumentation for multiaxial mechanical testing of inhomogeneous elastic membranes

    E-Print Network [OSTI]

    Herrmann, Ariel Marc

    2006-01-01

    This thesis presents the design, development, and construction of an instrument for biaxial mechanical testing of inhomogeneous elastic membranes. The instrument incorporates an arrangement of linear motion stages for ...

  13. Adventures in Radio Astronomy Instrumentation and Signal Processing

    E-Print Network [OSTI]

    Masci, Frank

    Adventures in Radio Astronomy Instrumentation and Signal Processing by Peter Leonard Mc Alan Langman, Karoo Array Telescope 1 Center for Astronomy Signal Processing and Electronics Research and implementation of several instruments for digi- tizing and processing analogue astronomical signals collected

  14. BE511 Class Syllabus and Schedule -Fall, 2013 Biomedical Instrumentation

    E-Print Network [OSTI]

    Vajda, Sandor

    will introduce physiological signals, biomedical sensors, analog signal amplification and filters, digital, processing, and analysis methods needed to design and fabricate biomedical instrumentation. Students for signal digitization, digital signal processing, and instrument programming. Students will design, build

  15. BE511 Class Syllabus and Schedule -Spring, 2013 Biomedical Instrumentation

    E-Print Network [OSTI]

    Vajda, Sandor

    signals, biomedical sensors, analog signal amplification and filters, digital acquisition, digital, digital signal processing, #12;and instrument programming. Students will design, build, and characterizeBE511 Class Syllabus and Schedule - Spring, 2013 Biomedical Instrumentation Instructor: Prof

  16. Development and Validation of an Occupational Skills Assessment Instrument

    E-Print Network [OSTI]

    Mathews, R. Mark; Whang, Paula L.; Fawcett, Stephen B.

    1980-01-01

    The development and validation of an occupational skills assessment instrument is described. The instrument was designed to describe accurately a participant's actual level of occupational skills in a variety of job-related ...

  17. Fiscal year 1996 U.S. Department of Energy, Richland Operations Office Site summary baseline

    SciTech Connect (OSTI)

    Johndro-Collins, A.

    1995-10-01

    The technical baseline is a hierarchical description of the Hanford Site cleanup mission. This technical baseline does not address the science, technology, or economic transition missions. It begins with a definition of the existing conditions at the Hanford Site, provides a description of the end product or mission accomplishments at completion, presents a statement of the major requirements and constraints that must be observed during the performance of the mission, and provides a statement of the top-level strategic approach to accomplish the mission. Mission-level interfaces are also described. This information is further defined hierarchically in increasing levels of detail. This definition is composed of the following major elements: functions that are key task descriptions; requirements that are the measurable standards to which the functions must be performed; architectures which are specific engineering solutions or systems that perform the functions described earlier; and verification ensuring the system satisfies the requirements and fulfills the functions. The above information is supplemented with the following: interface data; risk analyses and watch lists; assumptions; and required analyses.

  18. Tools for Closure Project and Contract Management: Development of the Rocky Flats Integrated Closure Project Baseline

    SciTech Connect (OSTI)

    Gelles, C. M.; Sheppard, F. R.

    2002-02-26

    This paper details the development of the Rocky Flats Integrated Closure Project Baseline - an innovative project management effort undertaken to ensure proactive management of the Rocky Flats Closure Contract in support of the Department's goal for achieving the safe closure of the Rocky Flats Environmental Technology Site (RFETS) in December 2006. The accelerated closure of RFETS is one of the most prominent projects within the Department of Energy (DOE) Environmental Management program. As the first major former weapons plant to be remediated and closed, it is a first-of-kind effort requiring the resolution of multiple complex technical and institutional challenges. Most significantly, the closure of RFETS is dependent upon the shipment of all special nuclear material and wastes to other DOE sites. The Department is actively working to strengthen project management across programs, and there is increasing external interest in this progress. The development of the Rocky Flats Integrated Closure Project Baseline represents a groundbreaking and cooperative effort to formalize the management of such a complex project across multiple sites and organizations. It is original in both scope and process, however it provides a useful precedent for the other ongoing project management efforts within the Environmental Management program.

  19. Comprehensive baseline environmental audit of former underground test areas in Colorado, Nevada, and New Mexico

    SciTech Connect (OSTI)

    Not Available

    1994-05-01

    This report documents the results of the Comprehensive Baseline Environmental Audit of Former Underground Test Areas (FUTAS) in the States of Colorado, Nevada, and New Mexico. DOE and contractor systems for management of environmental protection activities on the Nevada Test Site (NTS) were not within the scope of the audit. The audit was conducted May 16-May 26, 1994, by the Office of Environmental Audit (EH-24). DOE 5482.1 B, {open_quotes}Environment, Safety, and Health Appraisal Program{close_quotes}, establishes the mission of EH-24, which is to provide comprehensive, independent oversight of Department-wide environmental programs on behalf of the Secretary of Energy. The ultimate goal of EH-24 is to enhance environmental protection and minimize risk to public health and the environment. EH-24 accomplishes its mission using systematic and periodic evaluations of DOE`s environmental programs within line organizations and supplemental activities that strengthen self-assessment and oversight functions within program, field, and contractor organizations. These evaluations function as a vehicle through which the Secretary and program managers are apprised of the status and vulnerabilities of Departmental environmental activities and environmental management systems. Several types of evaluations are conducted, including: (1) comprehensive baseline environmental audits; (2) routine environmental audits; (3) environmental management assessments; and (4) special issue reviews.

  20. Baseline Fracture Toughness and CGR testing of alloys X-750 and XM-19 (EPRI Phase I)

    SciTech Connect (OSTI)

    J. H. Jackson; S. P. Teysseyre

    2012-02-01

    The Advanced Test Reactor National Scientific User Facility (ATR NSUF) and Electric Power Research Institute (EPRI) formed an agreement to test representative alloys used as reactor structural materials as a pilot program toward establishing guidelines for future ATR NSUF research programs. This report contains results from the portion of this program established as Phase I (of three phases) that entails baseline fracture toughness, stress corrosion cracking (SCC), and tensile testing of selected materials for comparison to similar tests conducted at GE Global Research. The intent of this Phase I research program is to determine baseline properties for the materials of interest prior to irradiation, and to ensure comparability between laboratories using similar testing techniques, prior to applying these techniques to the same materials after having been irradiated at the Advanced Test Reactor (ATR). The materials chosen for this research are the nickel based super alloy X-750, and nitrogen strengthened austenitic stainless steel XM-19. A spare core shroud upper support bracket of alloy X-750 was purchased by EPRI from Southern Co. and a section of XM-19 plate was purchased by EPRI from GE-Hitachi. These materials were sectioned at GE Global Research and provided to INL.

  1. Baseline Fracture Toughness and CGR testing of alloys X-750 and XM-19 (EPRI Phase I)

    SciTech Connect (OSTI)

    J. H. Jackson; S. P. Teysseyre

    2012-10-01

    The Advanced Test Reactor National Scientific User Facility (ATR NSUF) and Electric Power Research Institute (EPRI) formed an agreement to test representative alloys used as reactor structural materials as a pilot program toward establishing guidelines for future ATR NSUF research programs. This report contains results from the portion of this program established as Phase I (of three phases) that entails baseline fracture toughness, stress corrosion cracking (SCC), and tensile testing of selected materials for comparison to similar tests conducted at GE Global Research. The intent of this Phase I research program is to determine baseline properties for the materials of interest prior to irradiation, and to ensure comparability between laboratories using similar testing techniques, prior to applying these techniques to the same materials after having been irradiated at the Advanced Test Reactor (ATR). The materials chosen for this research are the nickel based super alloy X-750, and nitrogen strengthened austenitic stainless steel XM-19. A spare core shroud upper support bracket of alloy X-750 was purchased by EPRI from Southern Co. and a section of XM-19 plate was purchased by EPRI from GE-Hitachi. These materials were sectioned at GE Global Research and provided to INL.

  2. SMOOTHED ESTIMATING EQUATIONS FOR INSTRUMENTAL VARIABLES QUANTILE REGRESSION

    E-Print Network [OSTI]

    Kaplan, David M.; Sun, Yixiao

    2012-01-01

    Instrumental quantile regression inference for structuralsample inference for quantile regression models. Journal ofmethods for median regression models. Econometrica,

  3. 4 The Messenger 138 December 2009 Telescopes and Instrumentation

    E-Print Network [OSTI]

    Moehler, Sabine

    .0 (red lines) versus observed efficien- cies (blue lines) of the instrument+tele- scope for all orders

  4. Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

    SciTech Connect (OSTI)

    Iovenitti, Joe

    2014-01-02

    The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The Project chose the Dixie Valley Geothermal System in Nevada as a field laboratory site for methodology calibration purposes because, in the public domain, it is a highly characterized geothermal system in the Basin and Range with a considerable amount of geoscience and most importantly, well data. The overall project area is 2500km2 with the Calibration Area (Dixie Valley Geothermal Wellfield) being about 170km2. The project was subdivided into five tasks (1) collect and assess the existing public domain geoscience data; (2) design and populate a GIS database; (3) develop a baseline (existing data) geothermal conceptual model, evaluate geostatistical relationships, and generate baseline, coupled EGS favorability/trust maps from +1km above sea level (asl) to -4km asl for the Calibration Area at 0.5km intervals to identify EGS drilling targets at a scale of 5km x 5km; (4) collect new geophysical and geochemical data, and (5) repeat Task 3 for the enhanced (baseline + new ) data. Favorability maps were based on the integrated assessment of the three critical EGS exploration parameters of interest: rock type, temperature and stress. A complimentary trust map was generated to compliment the favorability maps to graphically illustrate the cumulative confidence in the data used in the favorability mapping. The Final Scientific Report (FSR) is submitted in two parts with Part I describing the results of project Tasks 1 through 3 and Part II covering the results of project Tasks 4 through 5 plus answering nine questions posed in the proposal for the overall project. FSR Part I presents (1) an assessment of the readily available public domain data and some proprietary data provided by Terra-Gen Power, LLC, (2) a re-interpretation of these data as required, (3) an exploratory geostatistical data analysis, (4) the baseline geothermal conceptual model, and (5) the EGS favorability/trust mapping. The conceptual model presented applies to both the hydrothermal system and EGS in the Dixie Valley region. FSR Part II presents (1) 278 new gravity stations; (2) enhanced gravity-magnetic modeling; (3) 42 new ambient seismic noise survey stations; (4) an integration of the new seismic noise data with a regional seismic network; (5) a new methodology and approach to interpret this data; (5) a novel method to predict rock type and temperature based on the newly interpreted data; (6) 70 new magnetotelluric (MT) stations; (7) an integrated interpretation of the enhanced MT data set; (8) the results of a 308 station soil CO2 gas survey; (9) new conductive thermal modeling in the project area; (10) new convective modeling in the Calibration Area; (11) pseudo-convective modeling in the Calibration Area; (12) enhanced data implications and qualitative geoscience correlations at three scales (a) Regional, (b) Project, and (c) Calibration Area; (13) quantitative geostatistical exploratory data analysis; and (14) responses to nine questions posed in the proposal for this investigation. Enhanced favorability/trust maps were not generated because there was not a sufficient amount of new, fully-vetted (see below) rock type, temperature, and stress data. The enhanced seismic data did generate a new method to infer rock type and temperature. However, in the opinion of the Principal Investigator for this project, this new methodology needs to be tested and evaluated at other sites in the Basin and Range before it is used to generate the referenced maps. As in the baseline conceptual model, the enhanced findings can be applied to both the hydrothermal system and EGS in the Dixie Valley region.

  5. Automatically Detecting Members and Instrumentation of Music Bands via Web

    E-Print Network [OSTI]

    Widmer, Gerhard

    as new or modi- fied web pages incorporating the changes become available. Deriving (member, instrumentAutomatically Detecting Members and Instrumentation of Music Bands via Web Content Mining Markus to automatically de- tecting music band members and instrumentation using web content min- ing techniques

  6. Visual Tracking of Laparoscopic Instruments in Standard Training

    E-Print Network [OSTI]

    Faloutsos, Petros

    Visual Tracking of Laparoscopic Instruments in Standard Training Environments Brian F. ALLEN. We propose a method for accurately tracking the spatial mo- tion of standard laparoscopic instruments requires no modifications to the standard FLS training box, camera or instruments. Keywords. Laparoscopic

  7. Search strategies for Java bottleneck location by dynamic instrumentation

    E-Print Network [OSTI]

    Kelly, Paul H. J.

    instrumentation within a Java Virtual Ma- chine. Several options are available; our implementation used our VeneerSearch strategies for Java bottleneck location by dynamic instrumentation Douglas J Brear, Thibaut investigation of this interesting approach. 1 Introduction The idea of dynamically patching instrumentation code

  8. Bibliography: Physical Modeling of Musical Instruments Julius O. Smith III

    E-Print Network [OSTI]

    Smith III, Julius Orion

    Bibliography: Physical Modeling of Musical Instruments Julius O. Smith III Center for Computer · N. H. Fletcher and T. D. Rossing, The Physics of Musical Instruments, Springer-Verlag, 1998 (2nd ed, eds., Mechanics of Musical Instruments, Springer-Verlag, 1995. (More specialized, advanced musical

  9. Pin: Building Customized Program Analysis Tools with Dynamic Instrumentation

    E-Print Network [OSTI]

    Hazelwood, Kim

    Pin: Building Customized Program Analysis Tools with Dynamic Instrumentation Chi-Keung Luk Robert.project@intel.com Abstract Robust and powerful software instrumentation tools are essential for program analysis tasks instrumentation system called Pin. Our goals are to pro- vide easy-to-use, portable, transparent, and efficient

  10. Towards a Universal Data Provenance Framework using Dynamic Instrumentation

    E-Print Network [OSTI]

    Keromytis, Angelos D.

    Towards a Universal Data Provenance Framework using Dynamic Instrumentation Eleni Gessiou1 instrumentation, which gathers data provenance information for real-world applications without any code modifications. Our framework simplifies the task of finding the right points to instrument, which can

  11. A Dynamic Binary Instrumentation Engine for the ARM Architecture

    E-Print Network [OSTI]

    Hazelwood, Kim

    A Dynamic Binary Instrumentation Engine for the ARM Architecture Kim Hazelwood University of Virginia Artur Klauser Intel Corporation ABSTRACT Dynamic binary instrumentation (DBI) is a powerful instrumentation system from Intel. In particular, we highlight the design decisions that are geared toward

  12. INSTRUMENT IDENTIFICATION IN POLYPHONIC MUSIC SIGNALS BASED ON INDIVIDUAL PARTIALS

    E-Print Network [OSTI]

    Tzanetakis, George

    INSTRUMENT IDENTIFICATION IN POLYPHONIC MUSIC SIGNALS BASED ON INDIVIDUAL PARTIALS Jayme Garcia of Victoria Department of Computer Science Victoria, BC, Canada ABSTRACT A new approach to instrument the concurrently played instrument sounds have a high degree of spec- tral overlapping. A pairwise comparison

  13. SCIAMACHY'S ABSORBING AEROSOL INDEX AND THE CONSEQUENCES OF INSTRUMENT DEGRADATION

    E-Print Network [OSTI]

    Graaf, Martin de

    SCIAMACHY'S ABSORBING AEROSOL INDEX AND THE CONSEQUENCES OF INSTRUMENT DEGRADATION L. G. Tilstra1- itoring the Absorbing Aerosol Index (AAI) [1] measured by the satellite instrument SCIAMACHY [2]. We find. This we conclude from straightforward calculation of the effect of instrument degradation based

  14. Computational Modeling of Chord Fingering for String Instruments

    E-Print Network [OSTI]

    Radicioni, Daniele

    Computational Modeling of Chord Fingering for String Instruments Daniele P. Radicioni (radicion for the fingering process with string instruments, based on a constraint satisfaction approach. The model is imple-mechanical aspects of the performer's hand in its interaction with the musical instrument. Introduction Music

  15. Sensing Super-position: Visual Instrument Sensor Replacement

    E-Print Network [OSTI]

    Maluf, David A.

    1 Sensing Super-position: Visual Instrument Sensor Replacement David A. Maluf 650-604-0611 David human vision through Sensing Super-position using a Visual Instrument Sensory Organ Replacement (VISOR instruments into sounds, which become relevant when the visual resolution is insufficient for very difficult

  16. GILK: A dynamic instrumentation tool for the Linux Kernel

    E-Print Network [OSTI]

    Pearce, David J.

    GILK: A dynamic instrumentation tool for the Linux Kernel David J. Pearce, Paul H.J. Kelly, Tony Abstract. This paper describes a dynamic instrumentation tool for the Linux Kernel which allows a stock Linux kernel to be modi#12;ed while in ex- ecution, with instruments implemented as kernel modules

  17. Absolute instruments and perfect imaging in geometrical optics

    E-Print Network [OSTI]

    Tyc, Tomas

    Absolute instruments and perfect imaging in geometrical optics Tom´as Tyc, Lenka Herz symmetric absolute instruments that provide perfect imaging in the sense of geometrical optics. We derive to propose several new absolute instruments, in particular a lens providing a stigmatic image of an optically

  18. Beam instrumentation for the Tevatron Collider

    SciTech Connect (OSTI)

    Moore, Ronald S.; Jansson, Andreas; Shiltsev, Vladimir; /Fermilab

    2009-10-01

    The Tevatron in Collider Run II (2001-present) is operating with six times more bunches and many times higher beam intensities and luminosities than in Run I (1992-1995). Beam diagnostics were crucial for the machine start-up and the never-ending luminosity upgrade campaign. We present the overall picture of the Tevatron diagnostics development for Run II, outline machine needs for new instrumentation, present several notable examples that led to Tevatron performance improvements, and discuss the lessons for future colliders.

  19. Dewcon Instruments Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (UtilityInstrumentsArea (DOE GTP) Jump to: navigation,SystemMEQDevil'sDewcon

  20. ARM - Campaign Instrument - 4star-air

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.TheoryTuesday, August 10, 20102016StudyCHAPS: CampaigngovInstruments4star-air

  1. Waaree Instruments Ltd | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowa (Utility Company)Idaho)Vossloh Kiepe Jump to:WKV AG JumpWaaree Instruments

  2. Accommodating subject and instrument variations in spectroscopic determinations

    DOE Patents [OSTI]

    Haas, Michael J. (Albuquerque, NM); Rowe, Robert K. (Corrales, NM); Thomas, Edward V. (Albuquerque, NM)

    2006-08-29

    A method and apparatus for measuring a biological attribute, such as the concentration of an analyte, particularly a blood analyte in tissue such as glucose. The method utilizes spectrographic techniques in conjunction with an improved instrument-tailored or subject-tailored calibration model. In a calibration phase, calibration model data is modified to reduce or eliminate instrument-specific attributes, resulting in a calibration data set modeling intra-instrument or intra-subject variation. In a prediction phase, the prediction process is tailored for each target instrument separately using a minimal number of spectral measurements from each instrument or subject.

  3. Microfabricated instrument for tissue biopsy and analysis

    DOE Patents [OSTI]

    Krulevitch, Peter A. (Pleasanton, CA); Lee, Abraham P. (Walnut Creek, CA); Northrup, M. Allen (Berkeley, CA); Benett, William J. (Livermore, CA)

    1999-01-01

    A microfabricated biopsy/histology instrument which has several advantages over the conventional procedures, including minimal specimen handling, smooth cutting edges with atomic sharpness capable of slicing very thin specimens (approximately 2 .mu.m or greater), micro-liter volumes of chemicals for treating the specimens, low cost, disposable, fabrication process which renders sterile parts, and ease of use. The cutter is a "cheese-grater" style design comprising a block or substrate of silicon and which uses anisotropic etching of the silicon to form extremely sharp and precise cutting edges. As a specimen is cut, it passes through the silicon cutter and lies flat on a piece of glass which is bonded to the cutter. Microchannels are etched into the glass or silicon substrates for delivering small volumes of chemicals for treating the specimen. After treatment, the specimens can be examined through the glass substrate. For automation purposes, microvalves and micropumps may be incorporated. Also, specimens in parallel may be cut and treated with identical or varied chemicals. The instrument is disposable due to its low cost and thus could replace current expensive microtome and histology equipment.

  4. KEPLER MISSION STELLAR AND INSTRUMENT NOISE PROPERTIES

    SciTech Connect (OSTI)

    Gilliland, Ronald L.; Chaplin, William J.; Elsworth, Yvonne P.; Miglio, Andrea; Dunham, Edward W.; Argabright, Vic S.; Borucki, William J.; Bryson, Stephen T.; Koch, David G.; Walkowicz, Lucianne M.; Basri, Gibor; Buzasi, Derek L.; Caldwell, Douglas A.; Jenkins, Jon M.; Van Cleve, Jeffrey; Welsh, William F.

    2011-11-01

    Kepler mission results are rapidly contributing to fundamentally new discoveries in both the exoplanet and asteroseismology fields. The data returned from Kepler are unique in terms of the number of stars observed, precision of photometry for time series observations, and the temporal extent of high duty cycle observations. As the first mission to provide extensive time series measurements on thousands of stars over months to years at a level hitherto possible only for the Sun, the results from Kepler will vastly increase our knowledge of stellar variability for quiet solar-type stars. Here, we report on the stellar noise inferred on the timescale of a few hours of most interest for detection of exoplanets via transits. By design the data from moderately bright Kepler stars are expected to have roughly comparable levels of noise intrinsic to the stars and arising from a combination of fundamental limitations such as Poisson statistics and any instrument noise. The noise levels attained by Kepler on-orbit exceed by some 50% the target levels for solar-type, quiet stars. We provide a decomposition of observed noise for an ensemble of 12th magnitude stars arising from fundamental terms (Poisson and readout noise), added noise due to the instrument and that intrinsic to the stars. The largest factor in the modestly higher than anticipated noise follows from intrinsic stellar noise. We show that using stellar parameters from galactic stellar synthesis models, and projections to stellar rotation, activity, and hence noise levels reproduce the primary intrinsic stellar noise features.

  5. Dual baseline search for muon antineutrino disappearance at 0.1 eV˛

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cheng, G.; Huelsnitz, W.; Aguilar-Arevalo, A. A.; Alcaraz-Aunion, J. L.; Brice, S. J.; Brown, B. C.; Bugel, L.; Catala-Perez, J.; Church, E. D.; Conrad, J. M.; et al

    2012-09-25

    The MiniBooNE and SciBooNE collaborations report the results of a joint search for short baseline disappearance of ?Ż? at Fermilab’s Booster Neutrino Beamline. The MiniBooNE Cherenkov detector and the SciBooNE tracking detector observe antineutrinos from the same beam, therefore the combined analysis of their data sets serves to partially constrain some of the flux and cross section uncertainties. Uncertainties in the ?? background were constrained by neutrino flux and cross section measurements performed in both detectors. A likelihood ratio method was used to set a 90% confidence level upper limit on ?Ż? disappearance that dramatically improves upon prior limits inmore »the ?m˛=0.1–100 eV˛ region.« less

  6. Concurrent 43 and 86 GHz Very Long Baseline Polarimetry of 3C273

    E-Print Network [OSTI]

    Joanne M. Attridge; John F. C. Wardle; Daniel C. Homan

    2005-06-10

    We present sub-milliarcsecond resolution total intensity and linear polarization VLBI images of 3C273, using concurrent 43 and 86 GHz data taken with the Very Long Baseline Array in May 2002. The structure seen in the innermost jet suggest that we have fortuitously caught the jet in the act of changing direction. The polarization images confirm that the core is unpolarized (fractional polarization m 5.2 x 10^{4} rad m^{-2} must be present in or in front of that region. These are among the highest rotation measures reported so far in the nucleus of any active galaxy or quasar, and must occur outside (but probably close to) the radio emitting region. The transverse rotation measure gradient is in the same sense as that observed by Asada et al and by Zavala and Taylor at greater core distances. The magnitude of the transverse gradient decreases rapidly with distance down the jet, and appears to be variable.

  7. JLab High Efficiency Klystron Baseline Design for 12 GeV Upgrade

    SciTech Connect (OSTI)

    Hovater, J.; Delayen, Jean; Harwood, Leigh; Nelson, Richard; Wang, Haipeng

    2003-05-01

    A computer design of a 13.5 kW, 1497 MHz, CW type, 55% efficiency, 0.8 microPv beam perveance, ~40 dB gain, 5-cavity klystron has been developed for JLab 12 GeV Upgrade project.The design uses TRICOMP codes to simulate the gun, mod-anode section, solenoid focus channel and beam dump. The klystron tube was designed by JPNDISK (1D) code initially and then optimized by MASK (2D) code for the baseline parameters. All of these codes have been bunch marked by JLab 5 kW operational klystrons. The details of design parameters and the simulations by MAFIA (3D) for the cavity couplings tuners, and window are also going to be presented.

  8. Quality Assurance Baseline Assessment Report to Los Alamos National Laboratory Analytical Chemistry Operations

    SciTech Connect (OSTI)

    Jordan, R. A.

    1998-09-01

    This report summarizes observations that were made during a Quality Assurance (QA) Baseline Assessment of the Nuclear Materials Technology Analytical Chemistry Group (NMT-1). The Quality and Planning personnel, for NMT-1, are spending a significant amount of time transitioning out of their roles of environmental oversight into production oversight. A team from the Idaho National Engineering and Environmental Laboratory Defense Program Environmental Surety Program performed an assessment of the current status of the QA Program. Several Los Alamos National Laboratory Analytical Chemistry procedures were reviewed, as well as Transuranic Waste Characterization Program (TWCP) QA documents. Checklists were developed and the assessment was performed according to an Implementation Work Plan, INEEL/EXT-98-00740.

  9. Comparison of the 1984 DOE/EIA annual energy outlook and the 1984 GRI baseline projection

    SciTech Connect (OSTI)

    Ashby, A.; Holtberg, P.; Woods, T.

    1985-01-01

    A comparative analysis of the Gas Research Institute (GRI) Baseline Projection of US Energy Supply and Demand with the DOE/EIA 1984 Annual Energy Outlook shows many similar assumptions, but many cases of widening differences between the projections of primary energy consumption and sector-specific energy consumption. The DOE/EIA expects a faster and more significant decline in the electricity to natural gas price ratio, lower sector-specific end-use prices of refined petroleum products, and a faster growth in industrial raw material energy demand. In contrast to the GRI report, it also omits an estimate of industrial cogeneration and does not retire any exisiting generating capacity. The report examines the basic assumptions and results of both projections using five scenarios. 17 tables.

  10. Idaho National Engineering Laboratory (INEL) Environmental Restoration (ER) Program Baseline Safety Analysis File (BSAF)

    SciTech Connect (OSTI)

    1995-09-01

    The Baseline Safety Analysis File (BSAF) is a facility safety reference document for the Idaho National Engineering Laboratory (INEL) environmental restoration activities. The BSAF contains information and guidance for safety analysis documentation required by the U.S. Department of Energy (DOE) for environmental restoration (ER) activities, including: Characterization of potentially contaminated sites. Remedial investigations to identify and remedial actions to clean up existing and potential releases from inactive waste sites Decontamination and dismantlement of surplus facilities. The information is INEL-specific and is in the format required by DOE-EM-STD-3009-94, Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports. An author of safety analysis documentation need only write information concerning that activity and refer to BSAF for further information or copy applicable chapters and sections. The information and guidance provided are suitable for: {sm_bullet} Nuclear facilities (DOE Order 5480-23, Nuclear Safety Analysis Reports) with hazards that meet the Category 3 threshold (DOE-STD-1027-92, Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports) {sm_bullet} Radiological facilities (DOE-EM-STD-5502-94, Hazard Baseline Documentation) Nonnuclear facilities (DOE-EM-STD-5502-94) that are classified as {open_quotes}low{close_quotes} hazard facilities (DOE Order 5481.1B, Safety Analysis and Review System). Additionally, the BSAF could be used as an information source for Health and Safety Plans and for Safety Analysis Reports (SARs) for nuclear facilities with hazards equal to or greater than the Category 2 thresholds, or for nonnuclear facilities with {open_quotes}moderate{close_quotes} or {open_quotes}high{close_quotes} hazard classifications.

  11. Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Iovenitti, Joe

    FSR Part I presents (1) an assessment of the readily available public domain data and some proprietary data provided by Terra-Gen Power, LLC, (2) a re-interpretation of these data as required, (3) an exploratory geostatistical data analysis, (4) the baseline geothermal conceptual model, and (5) the EGS favorability/trust mapping. The conceptual model presented applies to both the hydrothermal system and EGS in the Dixie Valley region. FSR Part II presents (1) 278 new gravity stations; (2) enhanced gravity-magnetic modeling; (3) 42 new ambient seismic noise survey stations; (4) an integration of the new seismic noise data with a regional seismic network; (5) a new methodology and approach to interpret this data; (5) a novel method to predict rock type and temperature based on the newly interpreted data; (6) 70 new magnetotelluric (MT) stations; (7) an integrated interpretation of the enhanced MT data set; (8) the results of a 308 station soil CO2 gas survey; (9) new conductive thermal modeling in the project area; (10) new convective modeling in the Calibration Area; (11) pseudo-convective modeling in the Calibration Area; (12) enhanced data implications and qualitative geoscience correlations at three scales (a) Regional, (b) Project, and (c) Calibration Area; (13) quantitative geostatistical exploratory data analysis; and (14) responses to nine questions posed in the proposal for this investigation. Enhanced favorability/trust maps were not generated because there was not a sufficient amount of new, fully-vetted (see below) rock type, temperature, and stress data. The enhanced seismic data did generate a new method to infer rock type and temperature. However, in the opinion of the Principal Investigator for this project, this new methodology needs to be tested and evaluated at other sites in the Basin and Range before it is used to generate the referenced maps. As in the baseline conceptual model, the enhanced findings can be applied to both the hydrothermal system and EGS in the Dixie Valley region.

  12. Reference manual for toxicity and exposure assessment and risk characterization. CERCLA Baseline Risk Assessment

    SciTech Connect (OSTI)

    1995-03-01

    The Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA, 1980) (CERCLA or Superfund) was enacted to provide a program for identifying and responding to releases of hazardous substances into the environment. The Superfund Amendments and Reauthorization Act (SARA, 1986) was enacted to strengthen CERCLA by requiring that site clean-ups be permanent, and that they use treatments that significantly reduce the volume, toxicity, or mobility of hazardous pollutants. The National Oil and Hazardous Substances Pollution Contingency Plan (NCP) (USEPA, 1985; USEPA, 1990) implements the CERCLA statute, presenting a process for (1) identifying and prioritizing sites requiring remediation and (2) assessing the extent of remedial action required at each site. The process includes performing two studies: a Remedial Investigation (RI) to evaluate the nature, extent, and expected consequences of site contamination, and a Feasibility Study (FS) to select an appropriate remedial alternative adequate to reduce such risks to acceptable levels. An integral part of the RI is the evaluation of human health risks posed by hazardous substance releases. This risk evaluation serves a number of purposes within the overall context of the RI/FS process, the most essential of which is to provide an understanding of ``baseline`` risks posed by a given site. Baseline risks are those risks that would exist if no remediation or institutional controls are applied at a site. This document was written to (1) guide risk assessors through the process of interpreting EPA BRA policy and (2) help risk assessors to discuss EPA policy with regulators, decision makers, and stakeholders as it relates to conditions at a particular DOE site.

  13. Baseline requirements of the proposed action for the Transportation Management Division routing models

    SciTech Connect (OSTI)

    Johnson, P.E.; Joy, D.S.

    1995-02-01

    The potential impacts associated with the transportation of hazardous materials are important to shippers, carriers, and the general public. This is particularly true for shipments of radioactive material. The shippers are primarily concerned with safety, security, efficiency, and equipment requirements. The carriers are concerned with the potential impact that radioactive shipments may have on their operations--particularly if such materials are involved in an accident. The general public has also expressed concerns regarding the safety of transporting radioactive and other hazardous materials through their communities. Because transportation routes are a central concern in hazardous material transport, the prediction of likely routes is the first step toward resolution of these issues. In response to these routing needs, several models have been developed over the past fifteen years at Oak Ridge National Laboratory (ORNL). The HIGHWAY routing model is used to predict routes for truck transportation, the INTERLINE routing model is used to predict both rail and barge routes, and the AIRPORT locator model is used to determine airports with specified criteria near a specific location. As part of the ongoing improvement of the US Department of Energy`s (DOE) Environmental Management Transportation Management Division`s (EM-261) computer systems and development efforts, a Baseline Requirements Assessment Session on the HIGHWAY, INTERLINE, and AIRPORT models was held at ORNL on April 27, 1994. The purpose of this meeting was to discuss the existing capabilities of the models and data bases and to review enhancements of the models and data bases to expand their usefulness. The results of the Baseline Requirements Assessment Section will be discussed in this report. The discussions pertaining to the different models are contained in separate sections.

  14. Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Iovenitti, Joe

    2014-01-02

    FSR Part I presents (1) an assessment of the readily available public domain data and some proprietary data provided by Terra-Gen Power, LLC, (2) a re-interpretation of these data as required, (3) an exploratory geostatistical data analysis, (4) the baseline geothermal conceptual model, and (5) the EGS favorability/trust mapping. The conceptual model presented applies to both the hydrothermal system and EGS in the Dixie Valley region. FSR Part II presents (1) 278 new gravity stations; (2) enhanced gravity-magnetic modeling; (3) 42 new ambient seismic noise survey stations; (4) an integration of the new seismic noise data with a regional seismic network; (5) a new methodology and approach to interpret this data; (5) a novel method to predict rock type and temperature based on the newly interpreted data; (6) 70 new magnetotelluric (MT) stations; (7) an integrated interpretation of the enhanced MT data set; (8) the results of a 308 station soil CO2 gas survey; (9) new conductive thermal modeling in the project area; (10) new convective modeling in the Calibration Area; (11) pseudo-convective modeling in the Calibration Area; (12) enhanced data implications and qualitative geoscience correlations at three scales (a) Regional, (b) Project, and (c) Calibration Area; (13) quantitative geostatistical exploratory data analysis; and (14) responses to nine questions posed in the proposal for this investigation. Enhanced favorability/trust maps were not generated because there was not a sufficient amount of new, fully-vetted (see below) rock type, temperature, and stress data. The enhanced seismic data did generate a new method to infer rock type and temperature. However, in the opinion of the Principal Investigator for this project, this new methodology needs to be tested and evaluated at other sites in the Basin and Range before it is used to generate the referenced maps. As in the baseline conceptual model, the enhanced findings can be applied to both the hydrothermal system and EGS in the Dixie Valley region.

  15. Nuclear Instruments and Methods in Physics Research A 577 (2007) 203206 Ferroelectric plasma source for heavy ion beam

    E-Print Network [OSTI]

    Gilson, Erik

    2007-01-01

    ]. In this longitudinal compression experiment, plasma was carried out from a cathode arc source to a meter distanceNuclear Instruments and Methods in Physics Research A 577 (2007) 203­206 Ferroelectric plasma. Davidsona , Larry Grishama , B. Grant Loganb , Peter A. Seidlb , William Waldronb , Simon S. Yub a Plasma

  16. Nuclear Instruments and Methods in Physics Research A 358 (1995) 147-150 INSTRUMENTS

    E-Print Network [OSTI]

    Wurtele, Jonathan

    1995-01-01

    INSTRUMENTS 8 METHODS IN PHYSICS RESEARCH Sectlon A Green function analysis of a Raman FEL G. Shvets *, J, MA 02139, USA Abstract This paper derives, in closed form, the Green function of an FEL operating in the strongly Raman regime. This Green function allows for the calculation of the temporal and spatial evolution

  17. ELXVIER Nuclear Instruments and Methods in Physics Research A 399 ( 1997) 477-488 INSTRUMENTS

    E-Print Network [OSTI]

    Morselli, Aldo

    NUCLEAR ELXVIER Nuclear Instruments and Methods in Physics Research A 399 ( 1997) 477 ' Russian Space Corporation "Energia" by name Korolev, Korolev, Moscow region, Russia ' Royal Institute light flashes (LF) in cosmonauts' eyes during orbital flights and for investigation of the nuclear

  18. The Status of Double Chooz Experiment as a proceeding of PIC 2013 conference

    E-Print Network [OSTI]

    Guang Yang

    2014-04-09

    Double Chooz is a long baseline neutrino oscillation experiment at Chooz, France. The purpose of this experiment is to measure the non-zero neutrino oscillation parameter theta13, a parameter for changing electron neutrinos into other neutrinos. This experiment uses reactors of the Chooz Nuclear Power Plant as a neutrino source. Double Chooz has published 2 result papers showing the measurement of the mixing angle, and 3rd publication is processing.

  19. Microfabricated instrument for tissue biopsy and analysis

    DOE Patents [OSTI]

    Krulevitch, Peter A. (Pleasanton, CA); Lee, Abraham P. (Walnut Creek, CA); Northrup, M. Allen (Berkeley, CA); Benett, William J. (Livermore, CA)

    2001-01-01

    A microfabricated biopsy/histology instrument which has several advantages over the conventional procedures, including minimal specimen handling, smooth cutting edges with atomic sharpness capable of slicing very thin specimens (approximately 2 .mu.m or greater), micro-liter volumes of chemicals for treating the specimens, low cost, disposable, fabrication process which renders sterile parts, and ease of use. The cutter is a "cheese-grater" style design comprising a block or substrate of silicon and which uses anisotropic etching of the silicon to form extremely sharp and precise cutting edges. As a specimen is cut, it passes through the silicon cutter and lies flat on a piece of glass which is bonded to the cutter. Microchannels are etched into the glass or silicon substrates for delivering small volumes of chemicals for treating the specimen. After treatment, the specimens can be examined through the glass substrate.

  20. SUNRISE: INSTRUMENT, MISSION, DATA, AND FIRST RESULTS

    SciTech Connect (OSTI)

    Solanki, S. K.; Barthol, P.; Danilovic, S.; Feller, A.; Gandorfer, A.; Hirzberger, J.; Riethmueller, T. L.; Schuessler, M.; Bonet, J. A.; Pillet, V. MartInez; Domingo, V.; Palacios, J.; Knoelker, M.; Gonzalez, N. Bello; Berkefeld, T.; Franz, M.; Schmidt, W.; Title, A. M.

    2010-11-10

    The SUNRISE balloon-borne solar observatory consists of a 1 m aperture Gregory telescope, a UV filter imager, an imaging vector polarimeter, an image stabilization system, and further infrastructure. The first science flight of SUNRISE yielded high-quality data that revealed the structure, dynamics, and evolution of solar convection, oscillations, and magnetic fields at a resolution of around 100 km in the quiet Sun. After a brief description of instruments and data, the first qualitative results are presented. In contrast to earlier observations, we clearly see granulation at 214 nm. Images in Ca II H display narrow, short-lived dark intergranular lanes between the bright edges of granules. The very small-scale, mixed-polarity internetwork fields are found to be highly dynamic. A significant increase in detectable magnetic flux is found after phase-diversity-related reconstruction of polarization maps, indicating that the polarities are mixed right down to the spatial resolution limit and probably beyond.

  1. Using instrument scraper surveys for corrosion repair

    SciTech Connect (OSTI)

    Akhnoukh, S.R.; Baghabrah, M.A. (Aramco (SA))

    1990-07-01

    This paper reports on a program for overall pipe line repair. This program was implemented to maintain pipe line integrity and for identifying problem areas which require reconditioning or replacing by: reviewing pipe line leak history; checking periodically lifetime expectancy and integrity of pipe coatings; using cathodic protection annual survey results to locate low potential areas (close-interval survey is needed to identify the exact location of corrosion); and hydrotesting the pipe line (using leaks or ruptures from the hydrotest to identify problem areas). The pipe line revalidation plan is insufficient for identifying pipe line leaks. Instrumented pig testing provides more accurate and reliable ways of testing the pipe line for internal or external corrosion or defects.

  2. Early instrumentation projects at the SSC

    SciTech Connect (OSTI)

    Martin, D.J.; Mestha, L.K.; Miller, S.A.; Talman, R.

    1990-04-01

    Conceptual designs for some SSC instrumentation is given. Stripline beam position monitors, appropriate for cryogenic operation are described, along with plans for their A/D conversion and recording. A global timing system based on fibre optics is described; it is to be capable of {plus minus}100 psec accuracy over many tens of kilometers. Stabilization is patterned after a scheme in use at CERN. Timing pulses (roughly 60 MHz) as well as pulses synchronized to the various frequency modulated RF systems are distributed and scaled by digital clocks situated at those locations where accurate timing is required. Finally, a digital control circuit to be used for synchronizing beam transfer the Low Energy Booster to the Medium Energy Booster is described. It is based on controlling the relative phases of the two RF systems even though one of the frequencies is variable. 4 refs., 10 figs.

  3. Highly damped kinematic coupling for precision instruments

    DOE Patents [OSTI]

    Hale, Layton C. (Livermore, CA); Jensen, Steven A. (Livermore, CA)

    2001-01-01

    A highly damped kinematic coupling for precision instruments. The kinematic coupling provides support while causing essentially no influence to its nature shape, with such influences coming, for example, from manufacturing tolerances, temperature changes, or ground motion. The coupling uses three ball-cone constraints, each combined with a released flexural degree of freedom. This arrangement enables a gain of higher load capacity and stiffness, but can also significantly reduce the friction level in proportion to the ball radius divided by the distance between the ball and the hinge axis. The blade flexures reduces somewhat the stiffness of the coupling and provides an ideal location to apply constrained-layer damping which is accomplished by attaching a viscoelastic layer and a constraining layer on opposite sides of each of the blade flexures. The three identical ball-cone flexures provide a damped coupling mechanism to kinematically support the projection optics system of the extreme ultraviolet lithography (EUVL) system, or other load-sensitive apparatus.

  4. The 1993 baseline biological studies and proposed monitoring plan for the Device Assembly Facility at the Nevada Test Site

    SciTech Connect (OSTI)

    Woodward, B.D.; Hunter, R.B.; Greger, P.D.; Saethre, M.B.

    1995-02-01

    This report contains baseline data and recommendations for future monitoring of plants and animals near the new Device Assembly Facility (DAF) on the Nevada Test Site (NTS). The facility is a large structure designed for safely assembling nuclear weapons. Baseline data was collected in 1993, prior to the scheduled beginning of DAF operations in early 1995. Studies were not performed prior to construction and part of the task of monitoring operational effects will be to distinguish those effects from the extensive disturbance effects resulting from construction. Baseline information on species abundances and distributions was collected on ephemeral and perennial plants, mammals, reptiles, and birds in the desert ecosystems within three kilometers (km) of the DAF. Particular attention was paid to effects of selected disturbances, such as the paved road, sewage pond, and the flood-control dike, associated with the facility. Radiological monitoring of areas surrounding the DAF is not included in this report.

  5. Baseline tests for arc melter vitrification of INEL buried wastes. Volume 1: Facility description and summary data report

    SciTech Connect (OSTI)

    Oden, L.L.; O`Connor, W.K.; Turner, P.C.; Soelberg, N.R.; Anderson, G.L.

    1993-11-19

    This report presents field results and raw data from the Buried Waste Integrated Demonstration (BWID) Arc Melter Vitrification Project Phase 1 baseline test series conducted by the Idaho National Engineering Laboratory (INEL) in cooperation with the U.S. Bureau of Mines (USBM). The baseline test series was conducted using the electric arc melter facility at the USBM Albany Research Center in Albany, Oregon. Five different surrogate waste feed mixtures were tested that simulated thermally-oxidized, buried, TRU-contaminated, mixed wastes and soils present at the INEL. The USBM Arc Furnace Integrated Waste Processing Test Facility includes a continuous feed system, the arc melting furnace, an offgas control system, and utilities. The melter is a sealed, 3-phase alternating current (ac) furnace approximately 2 m high and 1.3 m wide. The furnace has a capacity of 1 metric ton of steel and can process as much as 1,500 lb/h of soil-type waste materials. The surrogate feed materials included five mixtures designed to simulate incinerated TRU-contaminated buried waste materials mixed with INEL soil. Process samples, melter system operations data and offgas composition data were obtained during the baseline tests to evaluate the melter performance and meet test objectives. Samples and data gathered during this program included (a) automatically and manually logged melter systems operations data, (b) process samples of slag, metal and fume solids, and (c) offgas composition, temperature, velocity, flowrate, moisture content, particulate loading and metals content. This report consists of 2 volumes: Volume I summarizes the baseline test operations. It includes an executive summary, system and facility description, review of the surrogate waste mixtures, and a description of the baseline test activities, measurements, and sample collection. Volume II contains the raw test data and sample analyses from samples collected during the baseline tests.

  6. Diversity Strategies for Nuclear Power Plant Instrumentation and Control Systems

    SciTech Connect (OSTI)

    Wood, Richard Thomas; Belles, Randy; Cetiner, Mustafa Sacit; Holcomb, David Eugene; Korsah, Kofi; Loebl, Andy; Mays, Gary T; Muhlheim, Michael David; Mullens, James Allen; Poore III, Willis P; Qualls, A L; Wilson, Thomas L; Waterman, Michael E.

    2010-02-01

    This report presents the technical basis for establishing acceptable mitigating strategies that resolve diversity and defense-in-depth (D3) assessment findings and conform to U.S. Nuclear Regulatory Commission (NRC) requirements. The research approach employed to establish appropriate diversity strategies involves investigation of available documentation on D3 methods and experience from nuclear power and nonnuclear industries, capture of expert knowledge and lessons learned, determination of best practices, and assessment of the nature of common-cause failures (CCFs) and compensating diversity attributes. The research described in this report does not provide guidance on how to determine the need for diversity in a safety system to mitigate the consequences of potential CCFs. Rather, the scope of this report provides guidance to the staff and nuclear industry after a licensee or applicant has performed a D3 assessment per NUREG/CR-6303 and determined that diversity in a safety system is needed for mitigating the consequences of potential CCFs identified in the evaluation of the safety system design features. Succinctly, the purpose of the research described in this report was to answer the question, 'If diversity is required in a safety system to mitigate the consequences of potential CCFs, how much diversity is enough?' The principal results of this research effort have identified and developed diversity strategies, which consist of combinations of diversity attributes and their associated criteria. Technology, which corresponds to design diversity, is chosen as the principal system characteristic by which diversity criteria are grouped to form strategies. The rationale for this classification framework involves consideration of the profound impact that technology-focused design diversity provides. Consequently, the diversity usage classification scheme involves three families of strategies: (1) different technologies, (2) different approaches within the same technology, and (3) different architectures within the same technology. Using this convention, the first diversity usage family, designated Strategy A, is characterized by fundamentally diverse technologies. Strategy A at the system or platform level is illustrated by the example of analog and digital implementations. The second diversity usage family, designated Strategy B, is achieved through the use of distinctly different technologies. Strategy B can be described in terms of different digital technologies, such as the distinct approaches represented by general-purpose microprocessors and field-programmable gate arrays. The third diversity usage family, designated Strategy C, involves the use of variations within a technology. An example of Strategy C involves different digital architectures within the same technology, such as that provided by different microprocessors (e.g., Pentium and Power PC). The grouping of diversity criteria combinations according to Strategies A, B, and C establishes baseline diversity usage and facilitates a systematic organization of strategic approaches for coping with CCF vulnerabilities. Effectively, these baseline sets of diversity criteria constitute appropriate CCF mitigating strategies for digital safety systems. The strategies represent guidance on acceptable diversity usage and can be applied directly to ensure that CCF vulnerabilities identified through a D3 assessment have been adequately resolved. Additionally, a framework has been generated for capturing practices regarding diversity usage and a tool has been developed for the systematic assessment of the comparative effect of proposed diversity strategies (see Appendix A).

  7. The radio waves and thermal electrostatic noise spectroscopy (SORBET) experiment on BEPICOLOMBO/MMO/PWI

    E-Print Network [OSTI]

    Aulanier, Guillaume

    The radio waves and thermal electrostatic noise spectroscopy (SORBET) experiment on BEPICOLOMBO spectrometer designed for the radio and Plasma Waves Instrument onboard BepiColombo/Mercury Magnetospheric noise spectroscopy; Radio and plasma waves; Spacecraft instrumentation; BepiColombo/MMO 0273-1177/$30 Ó

  8. Jini technology as a solution to develop distributed instrumentation network in Engineering

    E-Print Network [OSTI]

    Libre de Bruxelles, Université

    -distributed applications like CORBA, LabVIEW or GPIB-ENET.5 2. VIRTUAL INSTRUMENTATION The term virtual instrumentation

  9. DOE Fundamentals Handbook: Instrumentation and Control, Volume 2

    SciTech Connect (OSTI)

    Not Available

    1992-06-01

    The Instrumentation and Control Fundamentals Handbook personnel, and the technical staff facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of instrumentation and control systems. The handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. This information will provide personnel with an understanding of the basic operation of various types of DOE nuclear facility instrumentation and control systems.

  10. DOE Fundamentals Handbook: Instrumentation and Control, Volume 1

    SciTech Connect (OSTI)

    Not Available

    1992-06-01

    The Instrumentation and Control Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of instrumentation and control systems. The handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. This information will provide personnel with an understanding of the basic operation of various types of DOE nuclear facility instrumentation and control systems.

  11. Scientific Instrumentation Available for Use by the Research Community (updated 1/29/15) Instrument Manufacturer/Model Location Access requirements

    E-Print Network [OSTI]

    Scientific Instrumentation Available for Use by the Research Community (updated 1/29/15) Instrument of appropriate training; cardkey access 24/7 #12;Scientific Instrumentation Available for Use by the Research instruments) BD LSR-Fortessa (1 instrument) FLOW CYTOMETRY RESOURCE CENTER (DWB 211) Completion of appropriate

  12. Instrumenting Wireless Sensor Networks for Real-Time Surveillance

    E-Print Network [OSTI]

    Instrumenting Wireless Sensor Networks for Real-Time Surveillance Songhwai Oh, Phoebus Chen information is not available, the classification-based tracking algorithm behaves as the NNF. Considering

  13. NASA agreements advance Mars exploration, Los Alamos Rover instrument...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NASA agreements advance Mars exploration NASA agreements advance Mars exploration, Los Alamos Rover instrument a key component Los Alamos National Laboratory is coordinating with...

  14. Orders of Magnitude: Three Works for Instruments and Electronics

    E-Print Network [OSTI]

    Einbond, Aaron Michael

    2009-01-01

    EINBOND for viola and live electronics Indifferent (q » 60-piano, percussion, and electronics WHAT THE BLIND SEE tofor Instruments and Electronics by Aaron Michael Einbond

  15. Radiation Protection Instrument Manual, Revision 1, PNL-MA-562

    SciTech Connect (OSTI)

    Johnson, Michelle Lynn

    2009-09-23

    PNL-MA-562 This manual provides specific information for operating and using portable radiological monitoring instruments available for use on the Hanford Site.

  16. A review of instrumental variable estimators for Mendelian randomization

    E-Print Network [OSTI]

    Burgess, Stephen; Small, Dylan S.; Thompson, Simon G.

    2015-07-13

    .pdf.txt Content-Type text/plain; charset=UTF-8 A review of instrumental variable estimators for Mendelian randomization Stephen Burgess 1,? Dylan S. Small 2 Simon G. Thompson 1 1 Department of Public Health and Primary Care University of Cambridge, UK 2... as instrumental variables in observational data has been termed ‘Mendelian randomization’ [6, 7]. Many reviews exist on the use of instrumental variables, in particular on the as- sumptions necessary to be an instrumental variable [8, 9], assessing the validity...

  17. DOE Announces Webinars on Instrumentation for Monitoring Marine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Announces Webinars on Instrumentation for Monitoring Marine Renewable Energy Devices, Energy Efficiency in Correctional Facilities, and More DOE Announces Webinars on...

  18. The CAPTAIN liquid argon neutrino experiment

    SciTech Connect (OSTI)

    Liu, Qiuguang [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-01-01

    The CAPTAIN liquid argon experiment is designed to make measurements of scientific importance to long-baseline neutrino physics and physics topics that will be explored by large underground detectors. The experiment employs two detectors – a primary detector with approximately 10-ton of liquid argon that will be deployed at different facilities for physics measurements and a prototype detector with 2-ton of liquid argon for configuration testing. The physics programs for CAPTAIN include measuring neutron interactions at Los Alamos Neutron Science Center, measuring neutrino interactions in medium energy regime (1.5–5 GeV) at Fermilab's NuMI beam, and measuring neutrino interactions in low energy regime (< 50 MeV) at stopped pion sources for supernova neutrino studies.

  19. LTC America`s, Inc. PTC-6 vacuum system (metal): Baseline report

    SciTech Connect (OSTI)

    1997-07-31

    The LTC coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC coating removal system consisted of several hand tools, a Roto Peen scaler, and a needlegun. They are designed to remove coatings from steel, concrete, brick, and wood. These hand tools are used with the LTC PTC-6 vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. The dust exposure was minimal but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole body vibration, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

  20. Lawrence Livermore National Laboratory Emergency Response Capability 2009 Baseline Needs Assessment Performance Assessment

    SciTech Connect (OSTI)

    Sharry, J A

    2009-12-30

    This document was prepared by John A. Sharry, LLNL Fire Marshal and Division Leader for Fire Protection and was reviewed by Sandia/CA Fire Marshal, Martin Gresho. This document is the second of a two-part analysis of Emergency Response Capabilities of Lawrence Livermore National Laboratory. The first part, 2009 Baseline Needs Assessment Requirements Document established the minimum performance criteria necessary to meet mandatory requirements. This second part analyses the performance of Lawrence Livermore Laboratory Emergency Management Department to the contents of the Requirements Document. The document was prepared based on an extensive review of information contained in the 2004 BNA, a review of Emergency Planning Hazards Assessments, a review of building construction, occupancy, fire protection features, dispatch records, LLNL alarm system records, fire department training records, and fire department policies and procedures. On October 1, 2007, LLNL contracted with the Alameda County Fire Department to provide emergency response services. The level of service called for in that contract is the same level of service as was provided by the LLNL Fire Department prior to that date. This Compliance Assessment will evaluate fire department services beginning October 1, 2008 as provided by the Alameda County Fire Department.