National Library of Energy BETA

Sample records for based low-carbon indicator

  1. Dynamic analysis of the urban-based low-carbon policy using system dynamics: Focused on housing and green space

    SciTech Connect (OSTI)

    Hong, Taehoon; Kim, Jimin Jeong, Kwangbok; Koo, Choongwan

    2015-02-09

    To systematically manage the energy consumption of existing buildings, the government has to enforce greenhouse gas reduction policies. However, most of the policies are not properly executed because they do not consider various factors from the urban level perspective. Therefore, this study aimed to conduct a dynamic analysis of an urban-based low-carbon policy using system dynamics, with a specific focus on housing and green space. This study was conducted in the following steps: (i) establishing the variables of urban-based greenhouse gases (GHGs) emissions; (ii) creating a stock/flow diagram of urban-based GHGs emissions; (iii) conducting an information analysis using the system dynamics; and (iv) proposing the urban-based low-carbon policy. If a combined energy policy that uses the housing sector (30%) and the green space sector (30%) at the same time is implemented, 2020 CO{sub 2} emissions will be 7.23 million tons (i.e., 30.48% below 2020 business-as-usual), achieving the national carbon emissions reduction target (26.9%). The results of this study could contribute to managing and improving the fundamentals of the urban-based low-carbon policies to reduce greenhouse gas emissions.

  2. Low Carbon Investors Ltd | Open Energy Information

    Open Energy Info (EERE)

    Investors Ltd Jump to: navigation, search Name: Low Carbon Investors Ltd Place: London, England, United Kingdom Zip: W1W 7TH Sector: Carbon Product: London-based manager of the Low...

  3. Low Carbon Research Institute | Open Energy Information

    Open Energy Info (EERE)

    Research Institute Jump to: navigation, search Logo: Low Carbon Research Institute Name: Low Carbon Research Institute Address: King Edward VII Avenue CF10 3NB Place: Cardiff,...

  4. California Low Carbon Fuels Infrastructure Investment Initiative...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Carbon Fuels Infrastructure Investment Initiative California Low Carbon Fuels Infrastructure Investment Initiative 2012 DOE Hydrogen and Fuel Cells Program and Vehicle...

  5. China Low Carbon Platform | Open Energy Information

    Open Energy Info (EERE)

    Low Carbon Platform Jump to: navigation, search Name China Low Carbon Platform AgencyCompany Organization Institute of Development Studies, Climate Change and Development Centre,...

  6. Morocco-Low Carbon Development Planning in the Power Sector ...

    Open Energy Info (EERE)

    Low Carbon Development Planning in the Power Sector Jump to: navigation, search Logo: Morocco-Low Carbon Development Planning in the Power Sector Name Morocco-Low Carbon...

  7. Nigeria-Low Carbon Development Planning in the Power Sector ...

    Open Energy Info (EERE)

    Low Carbon Development Planning in the Power Sector Jump to: navigation, search Logo: Nigeria-Low Carbon Development Planning in the Power Sector Name Nigeria-Low Carbon...

  8. Low Carbon Communities of the Americas | Open Energy Information

    Open Energy Info (EERE)

    Low Carbon Communities of the Americas Jump to: navigation, search Logo: Low Carbon Communities of the Americas Name Low Carbon Communities of the Americas AgencyCompany...

  9. Mexico-Low-Carbon Development | Open Energy Information

    Open Energy Info (EERE)

    Mexico-Low-Carbon Development (Redirected from ESMAP-Low-Carbon Development for Mexico) Jump to: navigation, search Logo: Mexico-ESMAP Low Carbon Growth Studies Program Name...

  10. Indonesia-Low Carbon Development Options Study | Open Energy...

    Open Energy Info (EERE)

    Indonesia-Low Carbon Development Options Study (Redirected from ESMAP-Indonesia-Low Carbon Development Options Study) Jump to: navigation, search Name Indonesia-ESMAP Low Carbon...

  11. Low Carbon Transition Unit | Open Energy Information

    Open Energy Info (EERE)

    Transition Unit Jump to: navigation, search Name Low Carbon Transition Unit AgencyCompany Organization Danish Government Partner Danish Ministry of Climate, Energy and Buildings;...

  12. Low Carbon World | Open Energy Information

    Open Energy Info (EERE)

    high level segment of the event, Toddington Harper Managing Director of The Low Carbon Economy Ltd (TLCE) became aware of the depth of valuable information being made available and...

  13. California Low Carbon Fuels Infrastructure Investment Initiative |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Low Carbon Fuels Infrastructure Investment Initiative California Low Carbon Fuels Infrastructure Investment Initiative 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon arravt082_ti_bowen_2012_o.pdf More Documents & Publications The Future of Home Heating StateActivity.pdf Hydrogen & Fuel Cells Program Overview

  14. China-Low Carbon Development Zones | Open Energy Information

    Open Energy Info (EERE)

    China-Low Carbon Development Zones (Redirected from E3G-China-Low Carbon Development Zones) Jump to: navigation, search Name China-Low Carbon Development Zones AgencyCompany...

  15. Kenya-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Kenya-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  16. United Kingdom Low Carbon Transition Plan | Open Energy Information

    Open Energy Info (EERE)

    Low Carbon Transition Plan Jump to: navigation, search Tool Summary LAUNCH TOOL Name: United Kingdom Low Carbon Transition Plan AgencyCompany Organization: United Kingdom...

  17. Stimulating Low-Carbon Vehicle Technologies | Open Energy Information

    Open Energy Info (EERE)

    Stimulating Low-Carbon Vehicle Technologies Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Stimulating Low-Carbon Vehicle Technologies AgencyCompany Organization: ITF...

  18. Turkey-Low Carbon Plan (LCP) | Open Energy Information

    Open Energy Info (EERE)

    Low Carbon Plan (LCP) Jump to: navigation, search Name Turkey-Country Specific Low Carbon Plans (LCP) AgencyCompany Organization World Wildlife Fund Sector Energy Topics...

  19. Enhancing low-carbon development by greening the economy: policy...

    Open Energy Info (EERE)

    low-carbon development by greening the economy: policy dialogue, advisory services, benchmarking Jump to: navigation, search Name Enhancing low-carbon development by greening the...

  20. India-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name India-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  1. Brazil-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Brazil-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  2. Poland-Low Carbon Growth Country Studies Program | Open Energy...

    Open Energy Info (EERE)

    Low Carbon Growth Country Studies Program Jump to: navigation, search Name Poland-Low Carbon Growth Country Studies Program AgencyCompany Organization Energy Sector Management...

  3. Guyana-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Guyana-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  4. EBRD-The Low Carbon Transition | Open Energy Information

    Open Energy Info (EERE)

    The Low Carbon Transition Jump to: navigation, search Tool Summary LAUNCH TOOL Name: EBRD-The Low Carbon Transition AgencyCompany Organization: European Bank for Reconstruction...

  5. Mexico-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Mexico-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  6. Malaysia-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    Malaysia-ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Malaysia-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks,...

  7. A Low Carbon Economic Strategy for Scotland | Open Energy Information

    Open Energy Info (EERE)

    Low Carbon Economic Strategy for Scotland Jump to: navigation, search Name A Low Carbon Economic Strategy for Scotland AgencyCompany Organization Government of Scotland Sector...

  8. Indonesia-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Indonesia-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  9. Egypt-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Egypt-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  10. Ethiopia-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    Ethiopia-ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Ethiopia-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks,...

  11. WWF-Country-Specific Low Carbon Plans | Open Energy Information

    Open Energy Info (EERE)

    Country-Specific Low Carbon Plans Jump to: navigation, search Name WWF-Country-Specific Low Carbon Plans AgencyCompany Organization World Wildlife Fund Sector Energy, Land,...

  12. Republic of Macedonia-Low Carbon Growth Country Studies Program...

    Open Energy Info (EERE)

    Low Carbon Growth Country Studies Program Jump to: navigation, search Name Republic of Macedonia-Low Carbon Growth Country Studies Program AgencyCompany Organization Energy...

  13. Low-Carbon Growth Country Studies: Getting Started Experience...

    Open Energy Info (EERE)

    as improved fiscal incentives in forestry, are also considered. Mexico's study provides a body of knowledge about prospective low carbon "wedges," specific low carbon projects, and...

  14. India-Low Carbon and Climate Resilience Development Planning...

    Open Energy Info (EERE)

    India-Low Carbon and Climate Resilience Development Planning Jump to: navigation, search Name CDKN-India-Low Carbon and Climate Resilience Development Planning AgencyCompany...

  15. India-Low Carbon and Climate Resilience Development Planning...

    Open Energy Info (EERE)

    India-Low Carbon and Climate Resilience Development Planning (Redirected from CDKN-India-Low Carbon and Climate Resilience Development Planning) Jump to: navigation, search Name...

  16. Guyana's Low Carbon Development Strategy | Open Energy Information

    Open Energy Info (EERE)

    Guyana's Low Carbon Development Strategy Jump to: navigation, search Tool Summary Name: Guyana's Low Carbon Development Strategy AgencyCompany Organization: Guyana Office of...

  17. ClimateWorks-Egypt-Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks-Egypt-Low Carbon Growth Planning Support Redirect page Jump to: navigation, search REDIRECT ClimateWorks Low Carbon Growth Planning Support Retrieved from "http:...

  18. Indonesia-Low Carbon Development Options Study | Open Energy...

    Open Energy Info (EERE)

    Indonesia-Low Carbon Development Options Study Jump to: navigation, search Name Indonesia-ESMAP Low Carbon Country Studies Program AgencyCompany Organization Energy Sector...

  19. Low Carbon Growth: a Potential Path for Mexico - GHG Abatement...

    Open Energy Info (EERE)

    "ESMAP Low Carbon Growth Country Studies Program" Retrieved from "http:en.openei.orgwindex.php?titleLowCarbonGrowth:aPotentialPathforMexico-GHGAbatementCostCurve&...

  20. Toward Low Carbon and Climate Change Resilient Territories |...

    Open Energy Info (EERE)

    Toward Low Carbon and Climate Change Resilient Territories Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Toward Low Carbon and Climate Change Resilient Territories...

  1. China-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name China-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  2. Low-Carbon Energy: A Roadmap | Open Energy Information

    Open Energy Info (EERE)

    Resource Type: Publications Website: www.worldwatch.orgnode7069summary Cost: Free, Paid Low-Carbon Energy: A Roadmap Screenshot References: Low-Carbon Energy: A...

  3. Lanthanide-halide based humidity indicators

    DOE Patents [OSTI]

    Beitz, James V. (Hinsdale, IL); Williams, Clayton W. (Chicago, IL)

    2008-01-01

    The present invention discloses a lanthanide-halide based humidity indicator and method of producing such indicator. The color of the present invention indicates the humidity of an atmosphere to which it is exposed. For example, impregnating an adsorbent support such as silica gel with an aqueous solution of the europium-containing reagent solution described herein, and dehydrating the support to dryness forms a substance with a yellow color. When this substance is exposed to a humid atmosphere the water vapor from the air is adsorbed into the coating on the pore surface of the silica gel. As the water content of the coating increases, the visual color of the coated silica gel changes from yellow to white. The color change is due to the water combining with the lanthanide-halide complex on the pores of the gel.

  4. High strength, high ductility low carbon steel

    DOE Patents [OSTI]

    Koo, Jayoung (Berkeley, CA); Thomas, Gareth (Berkeley, CA)

    1978-01-01

    A high strength, high ductility low carbon steel consisting essentially of iron, 0.05-0.15 wt% carbon, and 1-3 wt% silicon. Minor amounts of other constituents may be present. The steel is characterized by a duplex ferrite-martensite microstructure in a fibrous morphology. The microstructure is developed by heat treatment consisting of initial austenitizing treatment followed by annealing in the (.alpha. + .gamma.) range with intermediate quenching.

  5. Ukraine-Capacity Building for Low Carbon Growth | Open Energy...

    Open Energy Info (EERE)

    Ukraine-Capacity Building for Low Carbon Growth (Redirected from UNDP-Capacity Building for Low Carbon Growth in Ukraine) Jump to: navigation, search Name UNDP-Capacity Building...

  6. Ukraine-Capacity Building for Low Carbon Growth | Open Energy...

    Open Energy Info (EERE)

    Ukraine-Capacity Building for Low Carbon Growth Jump to: navigation, search Name UNDP-Capacity Building for Low Carbon Growth in Ukraine AgencyCompany Organization United Nations...

  7. Risk-based plant performance indicators

    SciTech Connect (OSTI)

    Boccio, J.L.; Azarm, M.A.; Vesely, W.E.; Hall, R.E.

    1989-01-01

    Tasked by the 1979 President's Commission on the Accident at Three Mile Island, the US nuclear power industry has put into place a performance indicator program as one means for showing a demonstrable record of achievement.'' Largely through the efforts of the Institute of Nuclear Power Operations (INPO), plant performance data has, since 1983, been collected and analyzed to aid utility management in measuring their plants' performance progress. The US Nuclear Regulatory Commission (NRC) has also developed a set of performance indicators. This program, conducted by NRC's Office for the Analysis and Evaluation of Operational Data (AEOD), is structured to present information on plant operational performance in a manner that could enhance the staff's ability to recognize changes in the safety performance. 4 refs., 1 fig., 1 tab.

  8. Alternative Fuel Infrastructure Expansion: Costs, Resources, Production Capacity, and Retail Availability for Low-Carbon Scenarios

    Broader source: Energy.gov [DOE]

    The petroleum-based transportation fuel system is complex and highly developed, in contrast to the nascent low-petroleum, low-carbon alternative fuel system. This report examines how expansion of the low-carbon transportation fuel infrastructure could contribute to deep reductions in petroleum use and greenhouse gas (GHG) emissions across the U.S. transportation sector. Three low-carbon scenarios, each using a different combination of low-carbon fuels, were developed to explore infrastructure expansion trends consistent with a study goal of reducing transportation sector GHG emissions to 80% less than 2005 levels by 2050.These scenarios were compared to a business-as-usual (BAU) scenario and were evaluated with respect to four criteria: fuel cost estimates, resource availability, fuel production capacity expansion, and retail infrastructure expansion.

  9. Low Carbon Development: Planning & Modelling Course | Open Energy...

    Open Energy Info (EERE)

    & Modelling Course Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low Carbon Development: Planning & Modelling Course AgencyCompany Organization: World Bank...

  10. Low-Carbon Land Transport Policy Handbook | Open Energy Information

    Open Energy Info (EERE)

    Policy Handbook Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low-Carbon Land Transport Policy Handbook AgencyCompany Organization: Routledge ComplexityEase...

  11. Low Carbon Society (LCS) Database | Open Energy Information

    Open Energy Info (EERE)

    (LCS) Database Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low Carbon Society (LCS) Database AgencyCompany Organization: LCS-RNet Sector: Energy, Land Focus Area:...

  12. Indonesia-Low Carbon Growth Project | Open Energy Information

    Open Energy Info (EERE)

    Growth Project Jump to: navigation, search Name Indonesia Low Carbon Growth Project AgencyCompany Organization United Kingdom Department for International Development Partner...

  13. Low Carbon Growth Plans: A Sectoral Approach to Climate Protection...

    Open Energy Info (EERE)

    to Climate Protection Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low Carbon Growth Plans: A Sectoral Approach to Climate Protection AgencyCompany Organization:...

  14. Low Carbon Society Vision 2050: India | Open Energy Information

    Open Energy Info (EERE)

    Vision 2050: India Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low Carbon Society Vision 2050: India AgencyCompany Organization: National Institute for...

  15. Low Carbon Growth Country Studies Program | Open Energy Information

    Open Energy Info (EERE)

    Country Studies Program Jump to: navigation, search Name Low Carbon Growth Country Studies Program AgencyCompany Organization Energy Sector Management Assistance Program of the...

  16. Low Carbon Economy Index 2010 | Open Energy Information

    Open Energy Info (EERE)

    Economy Index 2010 Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low Carbon Economy Index 2010 AgencyCompany Organization: PricewaterhouseCoopers Sector: Energy,...

  17. Low-Carbon Technology Cooperation in the Climate Regime | Open...

    Open Energy Info (EERE)

    in the Climate Regime Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low-Carbon Technology Cooperation in the Climate Regime AgencyCompany Organization: Energy...

  18. Low Carbon London - A Learning Journey (Smart Grid Project) ...

    Open Energy Info (EERE)

    - A Learning Journey (Smart Grid Project) Jump to: navigation, search Project Name Low Carbon London - A Learning Journey Country United Kingdom Headquarters Location London,...

  19. Low-Carbon Society Development: Towards 2025 in Bangladesh |...

    Open Energy Info (EERE)

    2025 in Bangladesh Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low-Carbon Society Development: Towards 2025 in Bangladesh AgencyCompany Organization: Kyoto...

  20. India-Low Carbon Transport | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name UNEP-Low Carbon Transport in India AgencyCompany Organization United Nations Environment Programme (UNEP) Sector Climate, Energy Focus Area...

  1. Philippines-Low Carbon Plan (LCP) | Open Energy Information

    Open Energy Info (EERE)

    Plan (LCP) Jump to: navigation, search Name Philippines-Low Carbon Plan (LCP) AgencyCompany Organization World Wildlife Fund Sector Energy Topics Background analysis, Low...

  2. Regional Workshop on Opportunities and Priorities for Low Carbon...

    Open Energy Info (EERE)

    Workshop on Opportunities and Priorities for Low Carbon Green Growth in Asia Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Regional Workshop on Opportunities and...

  3. International Low-Carbon Energy Technology Platform | Open Energy...

    Open Energy Info (EERE)

    Topics: Low emission development planning, Policiesdeployment programs Resource Type: Lessons learnedbest practices Website: www.iea.orgplatform.asp International Low-Carbon...

  4. International Research Network for Low Carbon Societies (LCS...

    Open Energy Info (EERE)

    and recommendations." References Retrieved from "http:en.openei.orgwindex.php?titleInternationalResearchNetworkforLowCarbonSocieties(LCS-RNet)&oldid764934" ...

  5. Low Carbon Green Growth: Integrated Policy Approach to Climate...

    Open Energy Info (EERE)

    Growth: Integrated Policy Approach to Climate Change for Asia-Pacific Developing Countries Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low Carbon Green Growth:...

  6. Ghana-Paving the Way for Low Carbon Development Strategies |...

    Open Energy Info (EERE)

    Overview The projects has three main goals: to provide input for a general methodology for developing Low Carbon Development Strategies to contribute to knowledge, mutual...

  7. Low Carbon Society Scenarios Towards 2050 | Open Energy Information

    Open Energy Info (EERE)

    20501 Tool Overview "The primary objective of the "Research project to Establish a Methodology to Evaluate Mid to Long Term Environmental Policy Options toward Asian Low-Carbon...

  8. Indonesia-Paving the Way for Low Carbon Development Strategies...

    Open Energy Info (EERE)

    Overview The projects has three main goals: to provide input for a general methodology for developing Low Carbon Development Strategies to contribute to knowledge, mutual...

  9. India-Options for Low Carbon Development | Open Energy Information

    Open Energy Info (EERE)

    Low Carbon Growth Country Studies Program AgencyCompany Organization Energy Sector Management Assistance Program of the World Bank Sector Energy, Land Focus Area Energy...

  10. China and a Sustainable Future: Towards a Low Carbon Economy...

    Open Energy Info (EERE)

    Carbon Economy and Society Jump to: navigation, search Tool Summary LAUNCH TOOL Name: China and a Sustainable Future: Towards a Low Carbon Economy and Society AgencyCompany...

  11. Diffusion of low-carbon technologies and the feasibility of long-term climate targets

    SciTech Connect (OSTI)

    Iyer, Gokul C.; Hultman, Nathan; Eom, Jiyong; McJeon, Haewon C.; Patel, Pralit L.; Clarke, Leon E.

    2015-01-01

    Stabilizing the global climate will require large-scale global deployment of low-carbon technologies. Even in the presence of aggressive climate policies, however, the diffusion of such technologies may be limited by several, institutional, behavioral, and social factors. In this paper, we review the literature on the sources of such diffusion constraints, and explore the potential implications of such non-economic constraints based on the GCAM integrated assessment model. Our analysis highlights that non-economic factors that limit technology deployment may have sizeable impacts on the feasibility and mitigation costs of achieving stringent stabilization targets. And such impacts are greatly amplified with major delays in serious climate policies. The results generally indicate that constraints on the expansions of CCS and renewables are more costly than those on nuclear or bioenergy, and jointly constraining these technologies leaves some scenarios infeasible.

  12. The Path to Low Carbon Passenger Vehicles | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Path to Low Carbon Passenger Vehicles The Path to Low Carbon Passenger Vehicles Technology to reduce GHG emissions by 40% available by 2025, and cost effective. PDF icon deer10_cackette.pdf More Documents & Publications Reducing Vehicle Emissions to Meet Environmental Goals Moving toward a commercial market for hydrogen fuel cell vehicles A View From The Bridge

  13. Wind energy contribution to a low-carbon grid

    SciTech Connect (OSTI)

    Pavlak, Alex

    2010-05-15

    Wind power systems being promoted today contribute little to a low-carbon grid because the system concept is 70-90 percent dependent on dispatchable fossil fuel generators. This structural conflict has no visible solutions. (author)

  14. Liquid fuels perspective on ultra low carbon vehicles | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy fuels perspective on ultra low carbon vehicles Liquid fuels perspective on ultra low carbon vehicles Fuels challenges in the evolving global energy market PDF icon deer11_simnick.pdf More Documents & Publications Green Racing Initiative: Accelerating the Use of Advanced Technologies & Renewable Fuels Well-to-Wheels Analysis of Energy Use and Greenhouse Gas Emissions of Plug-In Hybrid Electric Vehicles Vehicle Technologies Office Merit Review 2014: VTO Analysis Portfolio

  15. California Regulations on Renewble Hydrogen and Low Carbon Technologies |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Regulations on Renewble Hydrogen and Low Carbon Technologies California Regulations on Renewble Hydrogen and Low Carbon Technologies Presentation at the Renewable Hydrogen Workshop, Nov. 16, 2009, in Palm Springs, CA PDF icon renewable_hydrogen_workshop_nov16_achtelik.pdf More Documents & Publications Transportation and Stationary Power Integration Workshop: A California Perspective Vision for Rollout of Fuel Cell Vehicles and Hydrogen Fuel Stations State of the

  16. Thailand-NIES Low-Carbon Society Scenarios 2050 | Open Energy...

    Open Energy Info (EERE)

    NIES Low-Carbon Society Scenarios 2050 Jump to: navigation, search Name Thailand-NIES Low-Carbon Society Scenarios 2050 AgencyCompany Organization National Institute for...

  17. Malaysia-NIES Low-Carbon Society Scenarios 2050 | Open Energy...

    Open Energy Info (EERE)

    NIES Low-Carbon Society Scenarios 2050 Jump to: navigation, search Name Malaysia-NIES Low-Carbon Society Scenarios 2050 AgencyCompany Organization National Institute for...

  18. Vietnam-NIES Low-Carbon Society Scenarios 2050 | Open Energy...

    Open Energy Info (EERE)

    NIES Low-Carbon Society Scenarios 2050 Jump to: navigation, search Name Vietnam-NIES Low-Carbon Society Scenarios 2050 AgencyCompany Organization National Institute for...

  19. India-NIES Low-Carbon Society Scenarios 2050 | Open Energy Information

    Open Energy Info (EERE)

    NIES Low-Carbon Society Scenarios 2050 Jump to: navigation, search Name India-NIES Low-Carbon Society Scenarios 2050 AgencyCompany Organization National Institute for...

  20. Bangladesh-NIES Low-Carbon Society Scenarios 2050 | Open Energy...

    Open Energy Info (EERE)

    NIES Low-Carbon Society Scenarios 2050 Jump to: navigation, search Name Bangladesh-NIES Low-Carbon Society Scenarios 2050 AgencyCompany Organization National Institute for...

  1. Indonesia-NIES Low-Carbon Society Scenarios 2050 | Open Energy...

    Open Energy Info (EERE)

    NIES Low-Carbon Society Scenarios 2050 Jump to: navigation, search Name Indonesia-NIES Low-Carbon Society Scenarios 2050 AgencyCompany Organization National Institute for...

  2. China-NIES Low-Carbon Society Scenarios 2050 | Open Energy Information

    Open Energy Info (EERE)

    NIES Low-Carbon Society Scenarios 2050 Jump to: navigation, search Name China-NIES Low-Carbon Society Scenarios 2050 AgencyCompany Organization National Institute for...

  3. Japan-NIES Low-Carbon Society Scenarios 2050 | Open Energy Information

    Open Energy Info (EERE)

    NIES Low-Carbon Society Scenarios 2050 Jump to: navigation, search Name Japan-NIES Low-Carbon Society Scenarios 2050 AgencyCompany Organization National Institute for...

  4. Japan-Economics of Climate Change and Low Carbon Growth Strategies...

    Open Energy Info (EERE)

    and Low Carbon Growth Strategies in Northeast Asia Jump to: navigation, search Name Japan-Economics of Climate Change and Low Carbon Growth Strategies in Northeast Asia Agency...

  5. Optical-based smart structures for tamper-indicating applications

    SciTech Connect (OSTI)

    Sliva, P.; Anheier, N.C.; Simmons, K.L.; Undem, H.A.

    1996-11-01

    This report is a compilation of several related projects performed from 1991 through 1996 concerning the design, construction, and application of optical-based smart structure to tamper-indicating and sensing secure containers. Due to several influences, the projects were carried through to varying degrees of completion. Cancellation of the overall project at the client level motivated the authors to gather all of the technology and ideas about smart structures developed during these several projects, whether completed or just conceptualized, into one document. Although each section individually discusses a specific project, the overall document is written chronologically with each successive section showing how increased smart structure complexity was integrated into the container.

  6. A Low Carbon Development Guide for Local Government Actions in China

    SciTech Connect (OSTI)

    Zheng, Nina; Zhou, Nan; Price, Lynn; Ohshita, Stephanie

    2011-05-01

    Local level actions are crucial for achieving energy-saving and greenhouse gas emission reduction targets. Yet it is challenging to implement new policies and actions due to a lack of information, funding, and capacity. This is particularly the case in developing countries such as China. Even though national energy intensity and carbon intensity targets have been set, most local governments do not have the knowledge regarding actions to achieve the targets, the cost-effectiveness of policies, the possible impact of policies, or how to design and implement a climate action plan. This paper describes a guidebook that was developed to motivate and provide local governments in China with information to create an action plan to tackle climate change and increase energy efficiency. It provides a simple step-by-step description of how action plans can be established and essential elements to be included - from preparing a GHG emission inventory to implementation of the plan. The guidebook also provides a comprehensive list of successful policies and best practices found internationally and in China to encourage low carbon development in industry, buildings, transportation, electric power generation, agriculture and forestry. This paper also presents indicators that can be used to define low-carbon development, as well as to evaluate the effectiveness of actions taken at an aggregated (city) level, and at a sectoral or end use level. The guidebook can also be used for low carbon development by local governments in other developing countries.

  7. World Bank-Low-carbon Energy Projects for Development in Sub...

    Open Energy Info (EERE)

    Low-carbon Energy Projects for Development in Sub-Saharan Africa Jump to: navigation, search Name Low-carbon Energy Projects for Development in Sub-Saharan Africa AgencyCompany...

  8. Belize-Low-Carbon Energy for Central America: Building a Regional...

    Open Energy Info (EERE)

    Low-Carbon Energy for Central America: Building a Regional Model Jump to: navigation, search Name Belize-Low-Carbon Energy for Central America: Building a Regional Model Agency...

  9. Pathways to a Low Carbon Economy: The Business Response to Climate...

    Open Energy Info (EERE)

    to a Low Carbon Economy: The Business Response to Climate Change Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Pathways to a Low Carbon Economy: The Business Response...

  10. Brazil-Pathways to a Low Carbon Economy | Open Energy Information

    Open Energy Info (EERE)

    Pathways to a Low Carbon Economy Jump to: navigation, search Name Pathways to a Low Carbon Economy for Brazil AgencyCompany Organization McKinsey and Company Topics...

  11. Japan-Action Plan for Achieving a Low-Carbon Society | Open Energy...

    Open Energy Info (EERE)

    Japan-Action Plan for Achieving a Low-Carbon Society Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Japan-Action Plan for Achieving a Low-Carbon Society AgencyCompany...

  12. State options for low-carbon coal policy

    SciTech Connect (OSTI)

    Richard Cowart; Shanna Vale; Joshua Bushinsky; Pat Hogan

    2008-02-15

    There is growing state-level interest in the USA in accelerating the development of low-carbon coal technologies, including carbon capture and storage (CCS). Many states have adopted greenhouse gas emission targets and made commitments to low-carbon energy, and believe that these polices will result in job creation, air quality improvements, and reliable low-cost energy supplies. This paper provides an overview of options for states to encourage the deployment of carbon capture and sequestration. It describes actions (including legislation, regulations, and incentives) throughout the country. It also reviews in greater detail the range of policies available to state Public Utility Commissions for advancing deployment of CCS. Many states are adopting meaningful incentives for integrated gasification combined cycle (IGCC) power plants, and, as a handful of states are beginning to demonstrate, a number of these incentives can apply to CCS as well. States also have a number of authorities relevant to advancement of clean coal power, particularly within the domain of state public utility commissions (PUCs). State commissions have a wide array of policy options available to them in pursuing this goal, and will play a crucial role in determining the speed and effectiveness with which such technologies are deployed. States also enjoy major advantages, such as their direct jurisdiction over many critical power plant issues (including siting and retail ratemaking) that federal agencies do not possess. Regardless of the final form of federal greenhouse gas rules, states have the chance to gain experience as first movers and policy innovators, and will play an important role in shaping a low-carbon future. Although national policy is essential, a proactive approach by state policymakers and regulators to drive CCS can reduce future compliance costs, speed the required technological developments, and pave the way for future national policy.

  13. Transportation Energy Futures Series: Alternative Fuel Infrastructure Expansion: Costs, Resources, Production Capacity, and Retail Availability for Low-Carbon Scenarios

    SciTech Connect (OSTI)

    Melaina, M. W.; Heath, G.; Sandor, D.; Steward, D.; Vimmerstedt, L.; Warner, E.; Webster, K. W.

    2013-04-01

    Achieving the Department of Energy target of an 80% reduction in greenhouse gas emissions by 2050 depends on transportation-related strategies combining technology innovation, market adoption, and changes in consumer behavior. This study examines expanding low-carbon transportation fuel infrastructure to achieve deep GHG emissions reductions, with an emphasis on fuel production facilities and retail components serving light-duty vehicles. Three distinct low-carbon fuel supply scenarios are examined: Portfolio: Successful deployment of a range of advanced vehicle and fuel technologies; Combustion: Market dominance by hybridized internal combustion engine vehicles fueled by advanced biofuels and natural gas; Electrification: Market dominance by electric drive vehicles in the LDV sector, including battery electric, plug-in hybrid, and fuel cell vehicles, that are fueled by low-carbon electricity and hydrogen. A range of possible low-carbon fuel demand outcomes are explored in terms of the scale and scope of infrastructure expansion requirements and evaluated based on fuel costs, energy resource utilization, fuel production infrastructure expansion, and retail infrastructure expansion for LDVs. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored transportation-related strategies for abating GHGs and reducing petroleum dependence.

  14. Integrating Individual-Based Indices of Contaminant Effects

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rowe, Christopher L.; Hopkins, William A.; Congdon, Justin D.

    2001-01-01

    Habitat contamination can alter numerous biological processes in individual organisms. Examining multiple individual-level responses in an integrative fashion is necessary to understand how individual health or fitness reflects environmental contamination. Here we provide an example of such an integrated perspective based upon recent studies of an amphibian (the bullfrog, Rana catesbeiana) that experiences several, disparate changes when larval development occurs in a trace element�contaminated habitat. First, we present an overview of studies focused on specific responses of individuals collected from, or transplanted into, a habitat contaminated by coal combustion residues (CCR). These studies have reported morphological, behavioral, and physiological modificationsmore » to individuals chronically interacting with sediments in the CCR-contaminated site. Morphological abnormalities in the oral and tail regions in contaminant-exposed individuals influenced other properties such as grazing, growth, and swimming performance. Behavioral changes in swimming activities and responses to stimuli appear to influence predation risk in the contaminant-exposed population. Significant changes in bioenergetics in the contaminated habitat, evident as abnormally high energetic expenditures for survival (maintenance) costs, may ultimately influence production pathways (growth, energy storage) in individuals. We then present a conceptual model to examine how interactions among the affected systems (morphological, behavioral, physiological) may ultimately bring about more severe effects than would be predicted if the responses were considered in isolation. A complex interplay among simultaneously occurring biological changes emerges in which multiple, sublethal effects ultimately can translate into reductions in larval or juvenile survival, and thus reduced recruitment of juveniles into the population. In systems where individuals are exposed to low concentrations of contaminants for long periods of time, research focused on one or few sublethal responses could substantially underestimate overall effects on individuals. We suggest that investigators adopt a more integrated perspective on contaminant-induced biological changes so that studies of individual-based effects can be better integrated into analyses of mechanisms of population change.« less

  15. Sri Lanka-Rapid Assessment of City Emissions (RACE) for Low Carbon...

    Open Energy Info (EERE)

    Assessment of City Emissions (RACE) for Low Carbon Cities: Transport and Building Electricity Use Jump to: navigation, search Name Sri Lanka-Rapid Assessment of City Emissions...

  16. Annual Review of Low-Carbon Development in China (2011-2012)...

    Open Energy Info (EERE)

    URI: cleanenergysolutions.orgcontentannual-review-low-carbon-development- Language: English Policies: "Deployment Programs,Regulations" is not in the list of possible values...

  17. ECN-Paving the way for low-carbon development strategies | Open...

    Open Energy Info (EERE)

    report Website: www.ecn.nldocslibraryreport2011e11059.pdf Cost: Free Language: English ECN-Paving the way for low-carbon development strategies Screenshot References:...

  18. China-Enhancing Low-carbon Development by Greening the Economy...

    Open Energy Info (EERE)

    Policy Dialogue, Advisory Services, Benchmarking Jump to: navigation, search Name China-Enhancing Low-carbon Development by Greening the Economy: Policy Dialogue, Advisory...

  19. Sharing Knowledge for a Low-Carbon Future: Zoellick and Chu in...

    Broader source: Energy.gov (indexed) [DOE]

    the world move toward a low-carbon future. Their half-hour discussion at the World Bank's Washington headquarters will be web-streamed live via the World Bank's external website. ...

  20. Utility to Purchase Low-Carbon Power from Innovative Clean Coal Plant |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Utility to Purchase Low-Carbon Power from Innovative Clean Coal Plant Utility to Purchase Low-Carbon Power from Innovative Clean Coal Plant January 19, 2012 - 5:00pm Addthis Lawrence Livermore National Laboratory demonstrated coal gasification in large-scale field experiments at the Rocky Mountain Test Facility (above) near Hanna, Wyoming. Coal gasification and sequestration of the carbon dioxide produced are among the technologies being used in the Texas Clean Energy

  1. Nanopowder Manufacturing via Cost-Effective, Low-Carbon Footprint Process |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Nanopowder Manufacturing via Cost-Effective, Low-Carbon Footprint Process Nanopowder Manufacturing via Cost-Effective, Low-Carbon Footprint Process Low-Cost Nanopowder Production Uses Environmentally Friendly Process Nanomaterial technologies are expected to revolutionize energy storage and energy conversion applications by enabling high-performance devices such as batteries, supercapacitors, photovoltaic cells, solid-state lighting, and lasers to be produced more

  2. The International CHP/DHC Collaborative - Advancing Near-Term Low Carbon

    Energy Savers [EERE]

    Technologies, July 2008 | Department of Energy The International CHP/DHC Collaborative - Advancing Near-Term Low Carbon Technologies, July 2008 The International CHP/DHC Collaborative - Advancing Near-Term Low Carbon Technologies, July 2008 The International Energy Agency (IEA) has developed a scorecard of national Combined Heat and Power (CHP)/District Heat and Cooling (DHC) policy efforts that takes into account three criteria: the effectiveness of past policies in developing the CHP/DHC

  3. The International CHP/DHC Collaborative - Advancing Near-Term Low Carbon

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technologies, July 2008 | Department of Energy The International CHP/DHC Collaborative - Advancing Near-Term Low Carbon Technologies, July 2008 The International CHP/DHC Collaborative - Advancing Near-Term Low Carbon Technologies, July 2008 The International Energy Agency (IEA) has developed a scorecard of national Combined Heat and Power (CHP)/District Heat and Cooling (DHC) policy efforts that takes into account three criteria: the effectiveness of past policies in developing the CHP/DHC

  4. High strength, low carbon, dual phase steel rods and wires and process for making same

    DOE Patents [OSTI]

    Thomas, Gareth (Berkeley, CA); Nakagawa, Alvin H. (Campbell, CA)

    1986-01-01

    A high strength, high ductility, low carbon, dual phase steel wire, bar or rod and process for making the same is provided. The steel wire, bar or rod is produced by cold drawing to the desired diameter in a single multipass operation a low carbon steel composition characterized by a duplex microstructure consisting essentially of a strong second phase dispersed in a soft ferrite matrix with a microstructure and morphology having sufficient cold formability to allow reductions in cross-sectional area of up to about 99.9%. Tensile strengths of at least 120 ksi to over 400 ksi may be obtained.

  5. DOE Announces Clean Energy Projects for Low-Carbon Communities of the

    Energy Savers [EERE]

    Americas Initiative | Department of Energy Clean Energy Projects for Low-Carbon Communities of the Americas Initiative DOE Announces Clean Energy Projects for Low-Carbon Communities of the Americas Initiative January 8, 2010 - 12:00am Addthis WASHINGTON, D.C. - In support of the Energy and Climate Partnership of the Americas announced by President Obama at the 2009 Summit of the Americas, Secretary Steven Chu announced today that the U.S. Department of Energy has selected three initial

  6. An evaluation of approximations of acute hazard indices based on chronic hazard indices for California fossil-fuel power stations

    SciTech Connect (OSTI)

    Gratt, L.B.; Levin, L.

    1998-12-31

    The measures for evaluating risk under the Clean Air Act Amendments of 1990 are yet to be defined. Many risk assessments have used only chronic risk measures (lifetime cancer probability and chronic hazard index) based on yearly averages of long-term dispersion of substances into ambient air. In California, many facilities prepared risk assessments using hourly meteorological data and short-term emission rates, allowing the calculation of an acute hazard index. These risk assessments are more costly and labor-intensive than those using the annualized meteorological data. A simple scheme to estimate the acute hazard index from the chronic index is proposed. This scheme is evaluated for four electric power stations in Southern California. The simple scheme was found lacking due to the inability to reasonably estimate both the hourly emission rates from annual averages and hourly concentrations from annual concentrations. The need for the acute risk measure for stack emission can be questioned based on the more detailed risk assessments performed in California.

  7. Strength and formability of ultra-low-carbon Ti-IF steels[Interstitial Free

    SciTech Connect (OSTI)

    Jeong, W.C.

    2000-04-01

    Ultra-low-carbon interstitial free (IF) steel sheets bearing Ti and/or Nb have been extensively used for automotive panels because of superior formability and nonaging properties. It is well known that the interstitial elements such as C and N play important roles in the formability. The lower the contents of the C and N in steel, the better the formability of the steel. The demands for the steel with excellent formability from automotive industry will accelerate the progress in the steelmaking process, leading to the development of the ultra-low-carbon steel. With the advent and installation of improved vacuum degassing equipment in the steelmaking process, it is now possible to consistently produce ultra-low-carbon content of 0.002 to 0.005 wt pct. It is expected that in the near future, the C and N contents can be lowered to as low as 0.001 pct or less. This study is focused on strength and formability in the extremely ultra-low-carbon IF steels containing about 0.001 pct carbon.

  8. A Guidebook for Low-Carbon Development at the Local Level

    SciTech Connect (OSTI)

    Zhou, Nan; Price, Lynn; Ohshita, Stephanie; Zheng, Nina; Min, Hu

    2011-10-31

    This report aims to provide a manual with a menu of the successful policies and measures for local governments in China to create low carbon plan or climate action plans. This manual includes a comprehensive list of successful policies and best practices.

  9. Development of a performance-based industrial energy efficiency indicator for corn refining plants.

    SciTech Connect (OSTI)

    Boyd, G. A.; Decision and Information Sciences; USEPA

    2006-07-31

    Organizations that implement strategic energy management programs have the potential to achieve sustained energy savings if the programs are carried out properly. A key opportunity for achieving energy savings that plant managers can take is to determine an appropriate level of energy performance by comparing their plant's performance with that of similar plants in the same industry. Manufacturing facilities can set energy efficiency targets by using performance-based indicators. The U.S. Environmental Protection Agency (EPA), through its ENERGY STAR{reg_sign} program, has been developing plant energy performance indicators (EPIs) to encourage a variety of U.S. industries to use energy more efficiently. This report describes work with the corn refining industry to provide a plant-level indicator of energy efficiency for facilities that produce a variety of products--including corn starch, corn oil, animal feed, corn sweeteners, and ethanol--for the paper, food, beverage, and other industries in the United States. Consideration is given to the role that performance-based indicators play in motivating change; the steps needed to develop indicators, including interacting with an industry to secure adequate data for an indicator; and the actual application and use of an indicator when complete. How indicators are employed in the EPA's efforts to encourage industries to voluntarily improve their use of energy is discussed as well. The report describes the data and statistical methods used to construct the EPI for corn refining plants. Individual equations are presented, as are the instructions for using them in an associated Excel spreadsheet.

  10. A Sensitivity Model (SM) approach to analyze urban development in Taiwan based on sustainability indicators

    SciTech Connect (OSTI)

    Huang Shuli Yeh Chiatsung Budd, William W. Chen Liling

    2009-02-15

    Sustainability indicators have been widely developed to monitor and assess sustainable development. They are expected to guide political decision-making based on their capability to represent states and trends of development. However, using indicators to assess the sustainability of urban strategies and policies has limitations - as they neither reflect the systemic interactions among them, nor provide normative indications in what direction they should be developed. This paper uses a semi-quantitative systematic model tool (Sensitivity Model Tools, SM) to analyze the role of urban development in Taiwan's sustainability. The results indicate that the natural environment in urban area is one of the most critical components and the urban economic production plays a highly active role in affecting Taiwan's sustainable development. The semi-quantitative simulation model integrates sustainability indicators and urban development policy to provide decision-makers with information about the impacts of their decisions on urban development. The system approach incorporated by this paper can be seen as a necessary, but not sufficient, condition for a sustainability assessment. The participatory process of expert participants for providing judgments on the relations between indicator variables is also discussed.

  11. The Challenge of Achieving Californias Low Carbon Fuel Standard

    Gasoline and Diesel Fuel Update (EIA)

    Author: Peter Gross, peter.gross@eia.doe.gov, (202)586-8822 Disclaimer: Views not necessarily those of the U. S. Energy Information Administration Date: May 15, 2010 Revised: July 16, 2010 The Challenge of Achieving California's Low Carbon Fuel Standard Peter Gross Office of Integrated Analysis and Forecasting U.S. Energy Information Administration This paper is released to encourage discussion and critical comment. The analysis and conclusions expressed here are those of the author and not

  12. A Cumulative Energy Demand indicator (CED), life cycle based, for industrial waste management decision making

    SciTech Connect (OSTI)

    Puig, Rita, E-mail: rita.puig@eei.upc.edu [Escola dEnginyeria dIgualada (EEI), Universitat Politcnica de Catalunya (UPC), Plaa del Rei, 15, 08700 Igualada (Spain); Fullana-i-Palmer, Pere [UNESCO Chair in Life Cycle and Climate Change, Escola Superior de Comer Internacional, Universitat Pompeu Fabra (UPF), c/Passeig Pujades, 1, 08003 Barcelona (Spain); Baquero, Grau; Riba, Jordi-Roger [Escola dEnginyeria dIgualada (EEI), Universitat Politcnica de Catalunya (UPC), Plaa del Rei, 15, 08700 Igualada (Spain); Bala, Alba [UNESCO Chair in Life Cycle and Climate Change, Escola Superior de Comer Internacional, Universitat Pompeu Fabra (UPF), c/Passeig Pujades, 1, 08003 Barcelona (Spain)

    2013-12-15

    Highlights: We developed a methodology useful to environmentally compare industrial waste management options. The methodology uses a Net Energy Demand indicator which is life cycle based. The method was simplified to be widely used, thus avoiding cost driven decisions. This methodology is useful for governments to promote the best environmental options. This methodology can be widely used by other countries or regions around the world. - Abstract: Life cycle thinking is a good approach to be used for environmental decision-support, although the complexity of the Life Cycle Assessment (LCA) studies sometimes prevents their wide use. The purpose of this paper is to show how LCA methodology can be simplified to be more useful for certain applications. In order to improve waste management in Catalonia (Spain), a Cumulative Energy Demand indicator (LCA-based) has been used to obtain four mathematical models to help the government in the decision of preventing or allowing a specific waste from going out of the borders. The conceptual equations and all the subsequent developments and assumptions made to obtain the simplified models are presented. One of the four models is discussed in detail, presenting the final simplified equation to be subsequently used by the government in decision making. The resulting model has been found to be scientifically robust, simple to implement and, above all, fulfilling its purpose: the limitation of waste transport out of Catalonia unless the waste recovery operations are significantly better and justify this transport.

  13. Low carbon and clean energy scenarios for India: Analysis of targets approach

    SciTech Connect (OSTI)

    Shukla, Priyadarshi R.; Chaturvedi, Vaibhav

    2012-12-01

    Low carbon energy technologies are gaining increasing importance in India for reducing emissions as well as diversifying its energy supply mix. The present paper presents and analyses a targeted approach for pushing solar, wind and nuclear technologies in the Indian energy market. Targets for these technologies have been constructed on the basis of Indian government documents, policy announcements and expert opinion. Different targets have been set for the reference scenario and the carbon price scenario. In the reference scenario it is found that in the long run all solar, wind and nuclear will achieve their targets without any subsidy push. In the short run however, nuclear and solar energy require significant subsidy push. Nuclear energy requires a much higher subsidy allocation as compared to solar because the targets assumed are also higher for nuclear energy. Under a carbon price scenario, the carbon price drives the penetration of these technologies significantly. Still subsidy is required especially in the short run when the carbon price is low. It is also found that pushing solar, wind and nuclear technologies might lead to decrease in share of CCS under the price scenario and biomass under both BAU and price scenario, which implies that one set of low carbon technologies is substituted by other set of low carbon technologies. Thus the objective of emission mitigation might not be achieved due to this substitution. Moreover sensitivity on nuclear energy cost was done to represent risk mitigation for this technology and it was found that higher cost can significantly decrease the share of this technology under both the BAU and carbon price scenario.

  14. Static strain aging behavior of ultra low carbon bake hardening steel

    SciTech Connect (OSTI)

    De, A.K.; Cooman, B.C. de; Vandeputte, S.

    1999-09-10

    A detailed study of static strain aging in ultra low carbon (ULC) steel has not yet been reported. Therefore, the present study was carried out to gain an understanding of the aging kinetics in a ULC steel with a total carbon content of 20 ppm. The influence of dislocation density on the aging process was also taken into account. The kinetics of the aging were determined by means of the measurement of strength properties rather than solute concentration as it was experienced that quantitative estimation of such low amount of carbon during aging course would be too difficult with the existing diagnostic tools.

  15. ITP Distributed Energy: The International CHP/DHC Collaborative - Advancing Near-Term Low Carbon Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    50 1955 1960 1965 1970 1975 1980 1985 1990 1995 2000 2005 IEA_USA_16pp_A4:IEA_USA_16pp_A4 21/7/08 16:16 Page 1 1 CHP/DHC Country Scorecard: United States The United States has a long history of using Combined Heat and Power (CHP), and 8% of US electricity generation is provided by 85 gigawatts (GWe) of installed CHP capacity at over 3 300 facilities. The large-scale district energy systems are located in many major cities, and 330 university campuses use district energy systems as a low-carbon,

  16. The differential impact of low-carbon technologies on climate change mitigation cost under a range of socioeconomic and climate policy scenarios.

    SciTech Connect (OSTI)

    Barron, Robert W.; McJeon, Haewon C.

    2015-05-01

    This paper considers the effect of several key parameters of low carbon energy technologies on the cost of abatement. A methodology for determining the minimum level of performance required for a parameter to have a statistically significant impact on CO2 abatement cost is developed and used to evaluate the impact of eight key parameters of low carbon energy supply technologies on the cost of CO2 abatement. The capital cost of nuclear technology is found to have the greatest impact of the parameters studied. The cost of biomass and CCS technologies also have impacts, while their efficiencies have little, if any. Sensitivity analysis of the results with respect to population, GDP, and CO2 emission constraint show that the minimum performance level and impact of nuclear technologies is consistent across the socioeconomic scenarios studied, while the other technology parameters show different performance under higher population, lower GDP scenarios. Solar technology was found to have a small impact, and then only at very low costs. These results indicate that the cost of nuclear is the single most important driver of abatement cost, and that trading efficiency for cost may make biomass and CCS technologies more competitive.

  17. Thermal input control and enhancement for laser based residual stress measurements using liquid temperature indicating coatings

    DOE Patents [OSTI]

    Pechersky, M.J.

    1999-07-06

    An improved method for measuring residual stress in a material is disclosed comprising the steps of applying a spot of temperature indicating coating to the surface to be studied, establishing a speckle pattern surrounds the spot of coating with a first laser then heating the spot of coating with a far infrared laser until the surface plastically deforms. Comparing the speckle patterns before and after deformation by subtracting one pattern from the other will produce a fringe pattern that serves as a visual and quantitative indication of the degree to which the plasticized surface responded to the stress during heating and enables calculation of the stress. 3 figs.

  18. Thermal input control and enhancement for laser based residual stress measurements using liquid temperature indicating coatings

    DOE Patents [OSTI]

    Pechersky, Martin J. (Aiken, SC)

    1999-01-01

    An improved method for measuring residual stress in a material comprising the steps of applying a spot of temperature indicating coating to the surface to be studied, establishing a speckle pattern surrounds the spot of coating with a first laser then heating the spot of coating with a far infrared laser until the surface plastically deforms. Comparing the speckle patterns before and after deformation by subtracting one pattern from the other will produce a fringe pattern that serves as a visual and quantitative indication of the degree to which the plasticized surface responded to the stress during heating and enables calculation of the stress.

  19. Usage based indicators to assess the impact of scholarly works: architecture and method

    DOE Patents [OSTI]

    Bollen, Johan (Santa Fe, NM); Van De Sompel, Herbert (Santa Fe, NM)

    2012-03-13

    Although recording of usage data is common in scholarly information services, its exploitation for the creation of value-added services remains limited due to concerns regarding, among others, user privacy, data validity, and the lack of accepted standards for the representation, sharing and aggregation of usage data. A technical, standards-based architecture for sharing usage information is presented. In this architecture, OpenURL-compliant linking servers aggregate usage information of a specific user community as it navigates the distributed information environment that it has access to. This usage information is made OAI-PMH harvestable so that usage information exposed by many linking servers can be aggregated to facilitate the creation of value-added services with a reach beyond that of a single community or a single information service.

  20. Optimization of chemical compositions in low-carbon Al-killed enamel steel produced by ultra-fast continuous annealing

    SciTech Connect (OSTI)

    Dong, Futao; Du, Linxiu; Liu, Xianghua; Xue, Fei

    2013-10-15

    The influence of Mn,S and B contents on microstructural characteristics, mechanical properties and hydrogen trapping ability of low-carbon Al-killed enamel steel was investigated. The materials were produced and processed in a laboratory and the ultra-fast continuous annealing processing was performed using a continuous annealing simulator. It was found that increasing Mn,S contents in steel can improve its hydrogen trapping ability which is attributed by refined ferrite grains, more dispersed cementite and added MnS inclusions. Nevertheless, it deteriorates mechanical properties of steel sheet. Addition of trace boron results in both good mechanical properties and significantly improved hydrogen trapping ability. The boron combined with nitrogen segregating at grain boundaries, cementite and MnS inclusions, provides higher amount of attractive hydrogen trapping sites and raises the activation energy for hydrogen desorption from them. - Highlights: We study microstructures and properties in low-carbon Al-killed enamel steel. Hydrogen diffusion coefficients are measured to reflect fish-scale resistance. Manganese improves hydrogen trapping ability but decrease deep-drawing ability. Boron improves both hydrogen trapping ability and deep-drawing ability. Both excellent mechanical properties and fish-scale resistance can be matched.

  1. Production and Optimization of Direct Coal Liquefaction derived Low Carbon-Footprint Transportation Fuels

    SciTech Connect (OSTI)

    Steven Markovich

    2010-06-30

    This report summarizes works conducted under DOE Contract No. DE-FC26-05NT42448. The work scope was divided into two categories - (a) experimental program to pretreat and refine a coal derived syncrude sample to meet transportation fuels requirements; (b) system analysis of a commercial scale direct coal liquefaction facility. The coal syncrude was derived from a bituminous coal by Headwaters CTL, while the refining study was carried out under a subcontract to Axens North America. The system analysis included H{sub 2} production cost via six different options, conceptual process design, utilities requirements, CO{sub 2} emission and overall plant economy. As part of the system analysis, impact of various H{sub 2} production options was evaluated. For consistence the comparison was carried out using the DOE H2A model. However, assumptions in the model were updated using Headwaters database. Results of Tier 2 jet fuel specifications evaluation by the Fuels & Energy Branch, US Air Force Research Laboratory (AFRL/RZPF) located at Wright Patterson Air Force Base (Ohio) are also discussed in this report.

  2. Transportation Energy Futures Series: Freight Transportation Modal Shares: Scenarios for a Low-Carbon Future

    SciTech Connect (OSTI)

    Brogan, J. J.; Aeppli, A. E.; Beagan, D. F.; Brown, A.; Fischer, M. J.; Grenzeback, L. R.; McKenzie, E.; Vimmerstedt, L.; Vyas, A. D.; Witzke, E.

    2013-03-01

    Truck, rail, water, air, and pipeline modes each serve a distinct share of the freight transportation market. The current allocation of freight by mode is the product of technologic, economic, and regulatory frameworks, and a variety of factors -- price, speed, reliability, accessibility, visibility, security, and safety -- influence mode. Based on a comprehensive literature review, this report considers how analytical methods can be used to project future modal shares and offers insights on federal policy decisions with the potential to prompt shifts to energy-efficient, low-emission modes. There are substantial opportunities to reduce the energy used for freight transportation, but it will be difficult to shift large volumes from one mode to another without imposing considerable additional costs on businesses and consumers. This report explores federal government actions that could help trigger the shifts in modal shares needed to reduce energy consumption and emissions. This is one in a series of reports produced as a result of the Transportation Energy Futures project, a Department of Energy-sponsored multi-agency effort to pinpoint underexplored strategies for reducing GHGs and petroleum dependence related to transportation.

  3. Comparison of precipitate behaviors in ultra-low carbon, titanium-stabilized interstitial free steel sheets under different annealing processes

    SciTech Connect (OSTI)

    Shi, J.; Wang, X.

    1999-12-01

    Ultra-low carbon, titanium-stabilized interstitial free (ULC Ti-IF) steel sheets are widely used in the automobile industry because of excellent deep drawability. The annealing process is critical to their final property, and there are two different annealing processes used in industrial production of interstitial free (IF) steel sheets, namely batch annealing and continuous annealing. In this study, precipitation behaviors of titanium IF steels, that is, TiN, TiS, Ti{sub 4}(CS){sub 2}, and TiC, the size and dispersion of TiN, TiS, and Ti{sub 4}(CS){sub 2} remained almost unchanged after either annealing process. Conversely, the average size of a TiC particle increased substantially after both annealing processes, while TiC after continuous annealing was larger than that after batch annealing due to the higher heating temperature of continuous annealing. Two new particles, FeTiP and (Ti, Mn)S, were also observed in the batch annealing process but not in continuous annealing. The structure of FeTiP and (Ti, Mn)S were studied, and furthermore the evolution of FeTiP precipitation was found to be closely related to recrystallization in batch annealing. Finally, the interrelation among processing parameters, precipitation behaviors, and final property was studied.

  4. Method and apparatus for indicating electric charge remaining in batteries based on electrode weight and center of gravity

    DOE Patents [OSTI]

    Rouhani, S. Zia (Idaho Falls, ID)

    1996-01-01

    In most electrochemical batteries which generate electricity through the reaction of a battery electrode with an electrolyte solution, the chemical composition, and thus the weight and density, of the electrode changes as the battery discharges. The invention measures a parameter of the battery which changes as the weight of the electrode changes as the battery discharges and relates that parameter to the value of the parameter when the battery is fully charged and when the battery is functionally discharged to determine the state-of-charge of the battery at the time the parameter is measured. In one embodiment, the weight of a battery electrode or electrode unit is measured to determine the state-of-charge. In other embodiments, where a battery electrode is located away from the geometrical center of the battery, the position of the center of gravity of the battery or shift in the position of the center of gravity of the battery is measured (the position of the center of gravity changes with the change in weight of the electrode) and indicates the state-of-charge of the battery.

  5. Method and apparatus for indicating electric charge remaining in batteries based on electrode weight and center of gravity

    DOE Patents [OSTI]

    Rouhani, S.Z.

    1996-12-03

    In most electrochemical batteries which generate electricity through the reaction of a battery electrode with an electrolyte solution, the chemical composition, and thus the weight and density, of the electrode changes as the battery discharges. The invention measures a parameter of the battery which changes as the weight of the electrode changes as the battery discharges and relates that parameter to the value of the parameter when the battery is fully charged and when the battery is functionally discharged to determine the state-of-charge of the battery at the time the parameter is measured. In one embodiment, the weight of a battery electrode or electrode unit is measured to determine the state-of-charge. In other embodiments, where a battery electrode is located away from the geometrical center of the battery, the position of the center of gravity of the battery or shift in the position of the center of gravity of the battery is measured (the position of the center of gravity changes with the change in weight of the electrode) and indicates the state-of-charge of the battery. 35 figs.

  6. Experimental study of the distribution of alloying elements after the formation of epitaxial ferrite upon cooling in a low-carbon steel

    SciTech Connect (OSTI)

    Santofimia, M.J.; Kwakernaak, C.; Sloof, W.G.; Zhao, L.; Sietsma, J.

    2010-10-15

    The distributions of carbon and substitutional elements in a low-carbon steel during the formation of epitaxial ferrite on cooling after intercritical annealing have been studied by electron probe microanalysis (EPMA). The analysis has shown that the formation of epitaxial ferrite takes place with a partial redistribution of alloying elements between the epitaxial ferrite and the austenite. This redistribution of alloying elements causes compositional gradients in the epitaxial ferrite that lead to a different etching behaviour with respect to the intercritical ferrite. Contrary to Thermo-Calc predictions, a distinct partitioning behaviour of silicon has been observed.

  7. A comparative study of precipitation effects in Ti only and Ti-V Ultra Low Carbon (ULC) strip steels

    SciTech Connect (OSTI)

    Ooi, S.W.; Fourlaris, G. . E-mail: g.fourlaris@swansea.ac.uk

    2006-04-15

    Two ULC steel grades were investigated, one based on combined vanadium and titanium additions and the other based on titanium only additions. It has been established that TiC formation during interphase precipitation retards grain growth of the {l_brace}111{r_brace} texture grains during continuous annealing and hence positively affects the r value of the Ti only steel. The formation of newly formed TiC precipitates on dislocations during continuous annealing has been found to result in an increase of the yield strength in both steel grades, as the annealing temperature is increased. It is also confirmed that VC particles formed during the coiling process dissolve during the continuous annealing cycles. Suitable continuous annealing cycles can be adopted to produce high formable steels with a bake hardening potential using the beneficial effects of combined Ti-V additions.

  8. Low Carbon Aviation Committee Meeting

    Broader source: Energy.gov [DOE]

    The first committee meeting of the Propulsion and Energy Systems to Reduce Commercial Aviation Carbon Emissions Project will be held on June 2–3, 2015 at the National Academy of Sciences. BETO Director Jonathan Male will be speaking on a Department of Energy panel at the meeting, and Lead Analyst Zia Haq will be in attendance.

  9. Energy Intensity Indicators: Indicators for Major Sectors

    Broader source: Energy.gov [DOE]

    This system of energy intensity indicators for total energy covers the economy as a whole and each of the major end-use sectors—transportation, industry, commercial, and residential, as well as the electric power sector. These sectors are shown in Figure 1.

  10. Thermal indicator for wells

    DOE Patents [OSTI]

    Gaven, Jr., Joseph V. (Oakton, VA); Bak, Chan S. (Newbury Park, CA)

    1983-01-01

    Minute durable plate-like thermal indicators are employed for precision measuring static and dynamic temperatures of well drilling fluids. The indicators are small enough and sufficiently durable to be circulated in the well with drilling fluids during the drilling operation. The indicators include a heat resistant indicating layer, a coacting meltable solid component and a retainer body which serves to unitize each indicator and which may carry permanent indicator identifying indicia. The indicators are recovered from the drilling fluid at ground level by known techniques.

  11. Tamper indicating bolt

    DOE Patents [OSTI]

    Blagin, Sergei V.; Barkanov, Boris P.

    2004-09-14

    A tamper-indicating fastener has a cylindrical body with threads extending from one end along a portion of the body, and a tamper indicating having a transducer for converting physical properties of the body into electronic data; electronics for recording the electronic data; and means for communicating the recorded information to a remote location from said fastener. The electronics includes a capacitor that varies as a function of force applied by the fastener, and non-volatile memory for recording instances when the capacitance varies, providing an indication of unauthorized access.

  12. Federal Water Use Indices

    Broader source: Energy.gov [DOE]

    FEMP provides water use indices as a guide for Federal agencies. Note that each is a rough estimate of water usage at different types of sites. Your site may vary considerably.

  13. Enzymatic temperature change indicator

    DOE Patents [OSTI]

    Klibanov, Alexander M.; Dordick, Jonathan S.

    1989-01-21

    A temperature change indicator is described which is composed of an enzyme and a substrate for that enzyme suspended in a solid organic solvent or mixture of solvents as a support medium. The organic solvent or solvents are chosen so as to melt at a specific temperature or in a specific temperature range. When the temperature of the indicator is elevated above the chosen, or critical temperature, the solid organic solvent support will melt, and the enzymatic reaction will occur, producing a visually detectable product which is stable to further temperature variation.

  14. Energy Efficiency Indicators Methodology Booklet

    SciTech Connect (OSTI)

    Sathaye, Jayant; Price, Lynn; McNeil, Michael; de la rue du Can, Stephane

    2010-05-01

    This Methodology Booklet provides a comprehensive review and methodology guiding principles for constructing energy efficiency indicators, with illustrative examples of application to individual countries. It reviews work done by international agencies and national government in constructing meaningful energy efficiency indicators that help policy makers to assess changes in energy efficiency over time. Building on past OECD experience and best practices, and the knowledge of these countries' institutions, relevant sources of information to construct an energy indicator database are identified. A framework based on levels of hierarchy of indicators -- spanning from aggregate, macro level to disaggregated end-use level metrics -- is presented to help shape the understanding of assessing energy efficiency. In each sector of activity: industry, commercial, residential, agriculture and transport, indicators are presented and recommendations to distinguish the different factors affecting energy use are highlighted. The methodology booklet addresses specifically issues that are relevant to developing indicators where activity is a major factor driving energy demand. A companion spreadsheet tool is available upon request.

  15. Triboluminescent indicator system

    DOE Patents [OSTI]

    Goods, Steven H. (Livermore, CA); Dentinger, Paul M. (Sunol, CA); Whinnery, Jr., Leroy L. (Danville, CA)

    2003-06-24

    There is provided a light emitting device comprising a plurality of triboluminescent particles dispersed throughout a low density, frangible body and activated by rapidly crushing the body in order to transfer mechanical energy to some portion of the particles. The light emitted by these mechanically excited particles is collected and directed into a light conduit and transmitted to a detector/indicator means.

  16. Energy Intensity Indicators: Coverage

    Broader source: Energy.gov [DOE]

    This system of energy intensity indicators for total energy covers the economy as a whole and each of the major end-use sectors—transportation, industry, commercial, and residential, as well as the electric power sector. These sectors are shown in Figure 1. More detail for some of these sectors can be obtained by accessing the file "End-Use Sector Flowchart" below Figure 1.

  17. Tamper-indicating seal

    DOE Patents [OSTI]

    Fiarman, Sidney (Port Jefferson, NY); Degen, Michael F. (Patchogue, NY); Peters, Henry F. (Brookhaven, NY)

    1985-01-01

    There is disclosed a tamper-indicating seal that permits in the field inspection and detection of tampering. Said seal comprises a shrinkable tube having a visible pattern of markings which is shrunk over the item to be sealed, and a second transparent tube, having a second visible marking pattern, which is shrunk over the item and the first tube. The relationship between the first and second set of markings produces a pattern so that the seal may not be removed without detection.

  18. Tamper-indicating seal

    DOE Patents [OSTI]

    Fiarman, S.; Degen, M.F.; Peters, H.F.

    1982-08-13

    There is disclosed a tamper-indicating seal that permits in the field inspection and detection of tampering. Said seal comprises a shrinkable tube having a visible pattern of markings which is shrunk over th item to be sealed, and a second transparent tube, having a second visible marking pattern, which is shrunk over the item and the first tube. The relationship between the first and second set of markings produces a pattern so that the seal may not be removed without detection. The seal is particularly applicable to UF/sub 6/ cylinder valves.

  19. Enhanced tamper indicator

    DOE Patents [OSTI]

    Garcia, Anthony R.; Johnston, Roger G.

    2003-07-08

    The present invention provides an apparatus and method whereby the reliability and tamper-resistance of tamper indicators can be improved. A flexible connector may be routed through a latch for an enclosure such as a door or container, and the free ends of the flexible connector may be passed through a first locking member and firmly attached to an insert through the use of one or more attachment members such as set screws. A second locking member may then be assembled in interlocking relation with the first locking member to form an interlocked assembly around the insert. The insert may have one or more sharp projections extending toward the first or second locking member so that any compressive force applied in an attempt to disassemble the interlocked assembly results in permanent, visible damage to the first or second locking member.

  20. International energy indicators

    SciTech Connect (OSTI)

    Bauer, E.K.

    1981-02-01

    Extensive data are compiled for energy on the international scene and for the US. Data are indicated from the date given and into 1980 as far as available. Data are given for the international scene on: world crude oil production, 1975-to date; Iran: crude oil capacity, production, and shut-in, 1974-to date; Saudi Arabia: crude oil capacity, production, and shut-in, 1974-to date; OPEC (Ex-Iran and Saudi Arabia): capacity, production, and shut-in, 1974-to date; oil stocks: Free World, US, Japan, and Europe (landed), 1973-to date; petroleum consumption by industrial countries, 1973-to date; USSR crude oil production, 1974-to date; Free World and US nuclear generation capacity, 1973-to date. Data are supplied specifically for the US on US gross imports of crude oil and products, 1973-to date; landed cost of Saudi crude in current and 1974 dollars; US trade in bituminous coal, 1973-to date; summary of US merchandise trade, 1976-to date; and energy/GNP ratio.

  1. Energy Intensity Indicators: Indicators Data | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Data Energy Intensity Indicators: Indicators Data The files listed below contain energy intensity data and documentation that supports the information presented on this website. The files are in Microsoft® Excel® format (2007 and later versions) and are available to view and/or download. The entire set of files is also available for download as a zipped* (compressed) file. Economywide Transportation Sector Industrial Sector Residential Buildings Sector Commercial Buildings Sector Electricity

  2. Covariance propagation in spectral indices

    SciTech Connect (OSTI)

    Griffin, P. J.

    2015-01-09

    The dosimetry community has a history of using spectral indices to support neutron spectrum characterization and cross section validation efforts. An important aspect to this type of analysis is the proper consideration of the contribution of the spectrum uncertainty to the total uncertainty in calculated spectral indices (SIs). This study identifies deficiencies in the traditional treatment of the SI uncertainty, provides simple bounds to the spectral component in the SI uncertainty estimates, verifies that these estimates are reflected in actual applications, details a methodology that rigorously captures the spectral contribution to the uncertainty in the SI, and provides quantified examples that demonstrate the importance of the proper treatment the spectral contribution to the uncertainty in the SI.

  3. Covariance propagation in spectral indices

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Griffin, P. J.

    2015-01-09

    In this study, the dosimetry community has a history of using spectral indices to support neutron spectrum characterization and cross section validation efforts. An important aspect to this type of analysis is the proper consideration of the contribution of the spectrum uncertainty to the total uncertainty in calculated spectral indices (SIs). This study identifies deficiencies in the traditional treatment of the SI uncertainty, provides simple bounds to the spectral component in the SI uncertainty estimates, verifies that these estimates are reflected in actual applications, details a methodology that rigorously captures the spectral contribution to the uncertainty in the SI, andmore » provides quantified examples that demonstrate the importance of the proper treatment the spectral contribution to the uncertainty in the SI.« less

  4. Energy Intensity Indicators: Commercial Source Energy Consumption |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Commercial Source Energy Consumption Energy Intensity Indicators: Commercial Source Energy Consumption Figure C1 below reports as index numbers over the period 1970 through 2011: 1) commercial building floor space, 2) energy use based on source energy consumption, 3) energy intensity, and 4) the year-to-year influence of weather. Activity: Since 1970, the quantity of commercial floor space has nearly doubled, with about half of that increase occurring after 1985. There

  5. Low latency counter event indication

    DOE Patents [OSTI]

    Gara, Alan G. (Mount Kisco, NY); Salapura, Valentina (Chappaqua, NY)

    2010-08-24

    A hybrid counter array device for counting events with interrupt indication includes a first counter portion comprising N counter devices, each for counting signals representing event occurrences and providing a first count value representing lower order bits. An overflow bit device associated with each respective counter device is additionally set in response to an overflow condition. The hybrid counter array includes a second counter portion comprising a memory array device having N addressable memory locations in correspondence with the N counter devices, each addressable memory location for storing a second count value representing higher order bits. An operatively coupled control device monitors each associated overflow bit device and initiates incrementing a second count value stored at a corresponding memory location in response to a respective overflow bit being set. The incremented second count value is compared to an interrupt threshold value stored in a threshold register, and, when the second counter value is equal to the interrupt threshold value, a corresponding "interrupt arm" bit is set to enable a fast interrupt indication. On a subsequent roll-over of the lower bits of that counter, the interrupt will be fired.

  6. Low latency counter event indication

    DOE Patents [OSTI]

    Gara, Alan G. (Mount Kisco, NY); Salapura, Valentina (Chappaqua, NY)

    2008-09-16

    A hybrid counter array device for counting events with interrupt indication includes a first counter portion comprising N counter devices, each for counting signals representing event occurrences and providing a first count value representing lower order bits. An overflow bit device associated with each respective counter device is additionally set in response to an overflow condition. The hybrid counter array includes a second counter portion comprising a memory array device having N addressable memory locations in correspondence with the N counter devices, each addressable memory location for storing a second count value representing higher order bits. An operatively coupled control device monitors each associated overflow bit device and initiates incrementing a second count value stored at a corresponding memory location in response to a respective overflow bit being set. The incremented second count value is compared to an interrupt threshold value stored in a threshold register, and, when the second counter value is equal to the interrupt threshold value, a corresponding "interrupt arm" bit is set to enable a fast interrupt indication. On a subsequent roll-over of the lower bits of that counter, the interrupt will be fired.

  7. Triboluminescent tamper-indicating device

    DOE Patents [OSTI]

    Johnston, Roger G. (Los Alamos, NM); Garcia, Anthony R. E. (Espanola, NM)

    2002-01-01

    A tamper-indicating device is described. The device has a transparent or translucent cylindrical body that includes triboluminescent material, and an outer opaque layer that prevents ambient light from entering. A chamber in the body holds an undeveloped piece of photographic film bearing an image. The device is assembled from two body members. One of the body members includes a recess for storing film and an optical assembly that can be adjusted to prevent light from passing through the assembly and exposing the film. To use the device with a hasp, the body members are positioned on opposite sides of a hasp, inserted through the hasp, and attached. The optical assembly is then manipulated to allow any light generated from the triboluminescent materials during a tampering activity that damages the device to reach the film and destroy the image on the film.

  8. The EMAP: Ecological indicators of condition

    SciTech Connect (OSTI)

    Austin, H.K.

    1995-12-01

    In 1988, the Science Advisory Board to the EPA recommended a program to monitor ecological status and trends, as well as the development of innovative methods, for anticipating emerging environmental problems before a crisis. The multi-agency Environmental Monitoring And Assessment Program (EMAP) evolved with the following program elements: (1) a focus on environmental values and policy-relevant questions; (2) an activity that monitors indicators of ecological condition rather than individual stressors or pollutants; (3) an assessment-driven approach that provides probability-based, scientific results with known certainty; and (4) an activity that translates results into information useful to environmental policy makers and managers. Establishing baseline environmental conditions has received increasing attention with the growing awareness of impacts on human health and environmental integrity from global atmospheric change, acidic deposition, the loss of wetland habitats, and decreasing biodiversity. Monitoring programs can provide critical, quantitative results for scientific assessments of the complex effects of pollutants and natural changes on ecosystems. The goal of the EPA component of EMAP is to conduct research to develop place-based (e.g., large and small geographic scales) ecological monitoring and assessment. EPA/EMAP conducts research to develop and evaluate indicators of ecological condition and to detect in the long-term changes and trends in indicators and associated stresses and develops monitoring strategies to identify conditions of ecological resources in larger, high priority regions or in smaller, regional studies, such as watersheds. With its focus on long-term monitoring and assessment research and research on indicators of ecological condition, the EPA/EMAP can better determine where environmental programs are working to protect, improve, and maintain the quality of our nation`s ecological resources.

  9. Tamper-indicating barcode and method

    DOE Patents [OSTI]

    Cummings, Eric B.; Even, Jr., William R.; Simmons, Blake A.; Dentinger, Paul Michael

    2005-03-22

    A novel tamper-indicating barcode methodology is disclosed that allows for detection of alteration to the barcode. The tamper-indicating methodology makes use of a tamper-indicating means that may be comprised of a particulate indicator, an optical indicator, a deformable substrate, and/or may be an integrated aspect of the barcode itself. This tamper-indicating information provides greater security for the contents of containers sealed with the tamper-indicating barcodes.

  10. ENVIRONMENTAL INDICATORS FOR CARNEGIE MELLON UNIVERSITY:

    National Nuclear Security Administration (NNSA)

    Indicators for Carnegie Mellon University: Baseline Assessment 2004 9 WATER MANAGEMENT 1 WATER 57 Environmental Indicators for Carnegie Mellon University: Baseline Assessment 2004 WATER MANAGEMENT INDICATORS Table 9. Water Management Indicators for Carnegie Mellon, FY 2004 Report Section Indicator Reason FY2004 Units Water Supply 9.1.1 Annual total water use of campus Indicates water use on campus and any annual change 106,202 kgal/yr 9.1.1 Per capita water use for whole campus Indicates water

  11. Energy Intensity Indicators: Caveats and Cautions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Caveats and Cautions Energy Intensity Indicators: Caveats and Cautions This website contains a diverse collection of indicators that track changes in energy intensity at the national and end-use sector levels (after taking into account other explanatory factors). Indicators are based on readily available and publicly accessible data, although some of this data has been interpolated between published years, or extrapolated beyond the last published year. To help facilitate the appropriate

  12. Energy Intensity Indicators: Methodology Downloads | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Indicators: Methodology Downloads Energy Intensity Indicators: Methodology Downloads The files listed below contain methodology documentation and related studies that support the information presented on this website. The files are available to view and/or download as Adobe Acrobat PDF files. PDF icon Energy Indicators System: Index Construction Methodology PDF icon Changing the Base Year for the Index PDF icon "A Note on the Fisher Ideal Index Decomposition for Structural Change in Energy

  13. Energy Indicators for Sustainable Development: Guidelines and...

    Open Energy Info (EERE)

    Some indicators focus on the delivery of essential energy services for reducing poverty and improving living conditions, while other indicators focus on environmental...

  14. IRENA Renewable Energy Indicators | Open Energy Information

    Open Energy Info (EERE)

    Indicators Jump to: navigation, search Name Developing the IRENA Renewable Energy Indicators (Phase I) AgencyCompany Organization Worldwatch Institute Partner International...

  15. Review of sustainability indices and indicators: Towards a new City Sustainability Index (CSI)

    SciTech Connect (OSTI)

    Mori, Koichiro; Christodoulou, Aris

    2012-01-15

    The purpose of this paper is to discuss conceptual requirements for a City Sustainability Index (CSI) and to review existing major sustainability indices/indicators in terms of the requirements. The following indices are reviewed: Ecological Footprint (EF), Environmental Sustainability Index (ESI), Dashboard of Sustainability (DS), Welfare Index, Genuine Progress Indicator (GPI), Index of Sustainable Economic Welfare, City Development Index, emergy/exergy, Human Development Index (HDI), Environmental Vulnerability Index (EVI), Environmental Policy Index (EPI), Living Planet Index (LPI), Environmentally-adjusted Domestic Product (EDP), Genuine Saving (GS), and some applications of composite indices or/and multivariate indicators to local or regional context as case studies. The key conceptual requirements for an adequate CSI are: (i) to consider environmental, economic and social aspects (the triple bottom line of sustainability) from the viewpoint of strong sustainability; (ii) to capture external impacts (leakage effects) of city on other areas beyond the city boundaries particularly in terms of environmental aspects; (iii) to create indices/indicators originally for the purpose of assessing city sustainability; and (iv) to be able to assess world cities in both developed and developing countries using common axes of evaluation. Based on the review, we conclude that it is necessary to create a new CSI that enables us to assess and compare cities' sustainability performance in order to understand the global impact of cities on the environment and human life as compared with their economic contribution. In the future, the CSI will be able to provide local authorities with guidance toward sustainable paths. - Highlights: Black-Right-Pointing-Pointer We derive the four key requirements for a new City Sustainability Index (CSI) system. Black-Right-Pointing-Pointer First, the triple bottom line must be considered in terms of strong sustainability. Black-Right-Pointing-Pointer Second, environmental leakage effects beyond city boundaries should be captured. Black-Right-Pointing-Pointer Third, 'city sustainability' should be originally considered when CSI is created. Black-Right-Pointing-Pointer Fourth, cities in developed and developing countries can be evaluated without bias.

  16. Extracellular Signatures as Indicators of Processing Methods

    SciTech Connect (OSTI)

    Wahl, Karen L.

    2012-01-09

    As described in other chapters within this volume, many aspects of microbial cells vary with culture conditions and therefore can potentially be analyzed as forensic signatures of growth conditions. In addition to changes or variations in components of the microbes themselves, extracellular materials indicative of production processes may remain associated with the final bacterial product. It is well recognized that even with considerable effort to make pure products such as fine chemicals or pharmaceuticals, trace impurities from components or synthesis steps associated with production processes can be detected in the final product. These impurities can be used as indicators of production source or methods, such as to help connect drugs of abuse to supply chains. Extracellular residue associated with microbial cells could similarly help to characterize production processes. For successful growth of microorganisms on culture media there must be an available source of carbon, nitrogen, inorganic phosphate and sulfur, trace metals, water and vitamins. The pH, temperature, and a supply of oxygen or other gases must also be appropriate for a given organism for successful culture. The sources of these components and the range in temperature, pH and other variables has adapted over the years with currently a wide range of possible combinations of media components, recipes and parameters to choose from for a given organism. Because of this wide variability in components, mixtures of components, and other parameters, there is the potential for differentiation of cultured organisms based on changes in culture conditions. The challenge remains how to narrow the field of potential combinations and be able to attribute variations in the final bacterial product and extracellular signatures associated with the final product to information about the culture conditions or recipe used in the production of that product.

  17. Hydrogeochemical Indicators for Great Basin Geothemal Resources

    Broader source: Energy.gov [DOE]

    Hydrogeochemical Indicators for Great Basin Geothemal Resources presentation at the April 2013 peer review meeting held in Denver, Colorado.

  18. A tamper-indicating quantum seal

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Williams, Brian P.; Britt, Keith A.; Humble, Travis S.

    2016-01-04

    Technical means for identifying when tampering occurs is a critical part of many containment and surveillance technologies. Conventional fiber optic seals provide methods for monitoring enclosed inventories, but they are vulnerable to spoofing attacks based on classical physics. We address these vulnerabilities with the development of a quantum seal that offers the ability to detect the intercept-resend attack using quantum integrity verification. Our approach represents an application of entanglement to provide guarantees in the authenticity of the seal state by verifying it was transmitted coherently. We implement these ideas using polarization-entangled photon pairs that are verified after passing through amore » fiber-optic channel testbed. Using binary detection theory, we find the probability of detecting inauthentic signals is greater than 0.9999 with a false alarm chance of 10–9 for a 10 second sampling interval. In addition, we show how the Hong-Ou-Mandel effect concurrently provides a tight bound on redirection attack, in which tampering modifies the shape of the seal. Our measurements limit the tolerable path length change to sub-millimeter disturbances. As a result, these tamper-indicating features of the quantum seal offer unprecedented security for unattended monitoring systems.« less

  19. Energy Intensity Indicators | Department of Energy

    Office of Environmental Management (EM)

    Data & Tools » Energy Intensity Indicators Energy Intensity Indicators Energy efficiency is a vital part of the nation's energy strategy and has been since the first oil crisis in 1973. As part of a national priority for improving energy efficiency, the Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy (EERE) has established a national system of indicators to track changes in the energy intensity of our economy and economic sectors over time. This system of

  20. An efficient compression scheme for bitmap indices

    SciTech Connect (OSTI)

    Wu, Kesheng; Otoo, Ekow J.; Shoshani, Arie

    2004-04-13

    When using an out-of-core indexing method to answer a query, it is generally assumed that the I/O cost dominates the overall query response time. Because of this, most research on indexing methods concentrate on reducing the sizes of indices. For bitmap indices, compression has been used for this purpose. However, in most cases, operations on these compressed bitmaps, mostly bitwise logical operations such as AND, OR, and NOT, spend more time in CPU than in I/O. To speedup these operations, a number of specialized bitmap compression schemes have been developed; the best known of which is the byte-aligned bitmap code (BBC). They are usually faster in performing logical operations than the general purpose compression schemes, but, the time spent in CPU still dominates the total query response time. To reduce the query response time, we designed a CPU-friendly scheme named the word-aligned hybrid (WAH) code. In this paper, we prove that the sizes of WAH compressed bitmap indices are about two words per row for large range of attributes. This size is smaller than typical sizes of commonly used indices, such as a B-tree. Therefore, WAH compressed indices are not only appropriate for low cardinality attributes but also for high cardinality attributes.In the worst case, the time to operate on compressed bitmaps is proportional to the total size of the bitmaps involved. The total size of the bitmaps required to answer a query on one attribute is proportional to the number of hits. These indicate that WAH compressed bitmap indices are optimal. To verify their effectiveness, we generated bitmap indices for four different datasets and measured the response time of many range queries. Tests confirm that sizes of compressed bitmap indices are indeed smaller than B-tree indices, and query processing with WAH compressed indices is much faster than with BBC compressed indices, projection indices and B-tree indices. In addition, we also verified that the average query response time is proportional to the index size. This indicates that the compressed bitmap indices are efficient for very large datasets.

  1. Energy Intensity Indicators: Highlights | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Highlights Energy Intensity Indicators: Highlights This page highlights the major changes in the overall energy intensity for the United States, as well as summarizing changes in ...

  2. Scintillation probe with photomultiplier tube saturation indicator

    DOE Patents [OSTI]

    Ruch, Jeffrey F. (Bethel Park, PA); Urban, David J. (Glassport, PA)

    1996-01-01

    A photomultiplier tube saturation indicator is formed by supplying a supplemental light source, typically an light emitting diode (LED), adjacent to the photomultiplier tube. A switch allows the light source to be activated. The light is forwarded to the photomultiplier tube by an optical fiber. If the probe is properly light tight, then a meter attached to the indicator will register the light from the LED. If the probe is no longer light tight, and the saturation indicator is saturated, no signal will be registered when the LED is activated.

  3. A Comprehensive System of U.S. Energy Intensity Indicators

    Broader source: Energy.gov [DOE]

    This report describes a comprehensive system of energy intensity indicators for the United States that has been developed for the Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE) over the past decade. This system of indicators is hierarchical in nature, beginning with detailed indexes of energy intensity for various sectors of the economy, which are ultimately aggregated to an overall energy intensity index for the economy as a whole. The aggregation of energy intensity indexes to higher levels in the hierarchy is performed with a version of the Log Mean Divisia index (LMDI) method. Based upon the data and methods in the system of indicators, the economy-wide energy intensity index shows a decline of about 14% in 2011 relative to a 1985 base year.

  4. Energy Intensity Indicators: Overview of Concepts

    Broader source: Energy.gov [DOE]

    The Energy Intensity Indicators website reports changes in energy intensity in the United States since 1970. The website discusses, and presents data for, energy intensity trends by major end-use...

  5. Societal health and urban sustainability indicators

    SciTech Connect (OSTI)

    Petrich, C.H.; Tonn, B.E.

    1996-08-27

    Without the social will, no city can successfully Undertake the planning and programs necessary for meaningful progress toward sustainability. Social will derives from wellsprings of vital societal health. This paper presents an approach to helping cities in APEC member economies initiate a program for developing indicators of sustainability. Representative indicators of social capital and other aspects of civic engagement, as proxies for societal health, are presented.

  6. Optical temperature indicator using thermochromic semiconductors

    DOE Patents [OSTI]

    Kronberg, J.W.

    1995-01-01

    A reversible optical temperature indicator utilizes thermochromic semiconductors which vary in color in response to various temperature levels. The thermochromic material is enclosed in an enamel which provides protection and prevents breakdown at higher temperatures. Cadmium sulfide is the preferred semiconductor material. The indicator may be utilized as a sign or in a striped arrangement to clearly provide a warning to a user. The various color responses provide multiple levels of alarm.

  7. Energy Intensity Indicators: Transportation Energy Consumption | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Transportation Energy Consumption Energy Intensity Indicators: Transportation Energy Consumption This section contains an overview of the aggregate transportation sector, combining both passenger and freight segments of this sector. The specific energy intensity indicators for passenger and freight can be obtained from the links, passenger transportation, or freight transportation. For further detail within the transportation sector, download the appropriate Trend Data worksheet

  8. Optical temperature indicator using thermochromic semiconductors

    DOE Patents [OSTI]

    Kronberg, James W. (108 Independent Blvd., Aiken, SC 29801)

    1996-01-01

    A reversible optical temperature indicator utilizes thermochromic semiconductors which vary in color in response to various temperature levels. The thermochromic material is enclosed in an enamel which provides protection and prevents breakdown at higher temperatures. Cadmium sulfide is the preferred semiconductor material. The indicator may be utilized as a sign or in a striped arrangement to clearly provide a warning to a user. The various color responses provide multiple levels of alarm.

  9. Energy Intensity Indicators Data | Department of Energy

    Office of Environmental Management (EM)

    Intensity Indicators Data Energy Intensity Indicators Data The files listed below contain energy intensity data and documentation that supports the information presented on this website. The files are in Microsoft® Excel® format (2007 and later versions). Package icon Entire Set File Economywide File Transportation Sector File Industrial Sector File Residential Buildings Sector File Commercial Buildings Sector File Electricity Sector More Documents & Publications Home Performance

  10. State of charge indicators for a battery

    DOE Patents [OSTI]

    Rouhani, S. Zia (Idaho Falls, ID)

    1999-01-01

    The present invention relates to state of charge indicators for a battery. One aspect of the present invention utilizes expansion and contraction displacements of an electrode plate of a battery to gauge the state of charge in the battery. One embodiment of a battery of the present invention includes an anodic plate; a cathodic plate; an electrolyte in contact with the anodic and cathodic plates; plural terminals individually coupled with one of the anodic and cathodic plates; a separator intermediate the anodic and cathodic plates; an indicator configured to indicate an energy level of the battery responsive to movement of the separator; and a casing configured to house the anodic and cathodic plates, electrolyte, and separator.

  11. Dominican Republic-Low-Carbon Energy Roadmaps for the Greater...

    Open Energy Info (EERE)

    Institute Partner Deutsche Gesellschaft fr Internationale Zusammenarbeit (GIZ) GmbH, National Energy Commission Sector Climate, Energy Focus Area Economic Development,...

  12. Jamaica-Low-Carbon Energy Roadmaps for the Greater Antilles ...

    Open Energy Info (EERE)

    Institute Partner Deutsche Gesellschaft fr Internationale Zusammenarbeit (GIZ) GmbH, National Energy Commission Sector Climate, Energy Focus Area Economic Development,...

  13. California Regulations on Renewble Hydrogen and Low Carbon Technologie...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Carbon Technologies Presentation at the Renewable Hydrogen Workshop, Nov. 16, 2009, in Palm Springs, CA PDF icon renewablehydrogenworkshopnov16achtelik.pdf More Documents &...

  14. Building a Global Low-Carbon Technology Pathway

    Broader source: Energy.gov [DOE]

    At COP 20 in Lima, Peru, Department of Energy staff will discuss actions we're taking to help implement the United States' commitments to fight global climate change.

  15. India-Low Carbon Transport | Open Energy Information

    Open Energy Info (EERE)

    largest contributor of CO2 emissions. The sector also provokes road congestion, local air pollution, noise and accidents, particularly in urban areas. Opportunities exist to...

  16. Low Carbon Growth: a Potential Path for Mexico - GHG Abatement...

    Open Energy Info (EERE)

    McKinsey and Company Sector Energy, Land Focus Area Energy Efficiency, Renewable Energy Topics Resource assessment, Background analysis Website http:www.esmap.orgfilezpub...

  17. Gabon-Supporting Low Carbon Development and Climate Resilient...

    Open Energy Info (EERE)

    Strategies in Africa AgencyCompany Organization France Agency of Development (AFD) Partner ADETEF Sector Climate Focus Area People and Policy Topics Low emission...

  18. Catalyzing Low Carbon Growth in Developing Countries | Open Energy...

    Open Energy Info (EERE)

    Growth in Developing Countries: Public Finance Mechanisms to scale up private sector investment in climate solutions AgencyCompany Organization: United Nations Environment...

  19. Enabling a Transition to Low Carbon Economies in Developing Countries...

    Open Energy Info (EERE)

    - Waste to Energy, - Anaerobic Digestion, Solar, - Concentrating Solar Power, - Solar PV, Wind Topics: GHG inventory, Low emission development planning, Policiesdeployment...

  20. China-Low Carbon Development Zones | Open Energy Information

    Open Energy Info (EERE)

    development planning, Market analysis, Policiesdeployment programs Resource Type Lessons learnedbest practices Website http:www.chathamhouse.org.uk Country China UN...

  1. UNDP-Low Carbon Portal | Open Energy Information

    Open Energy Info (EERE)

    Energy, Land Topics: Low emission development planning Resource Type: Guidemanual, Lessons learnedbest practices Website: europeandcis.undp.orglowcarbon...

  2. Policies for Low Carbon Growth | Open Energy Information

    Open Energy Info (EERE)

    development planning, Policiesdeployment programs, Background analysis Resource Type: Lessons learnedbest practices Website: www.odi.org.ukresourcesdownload...

  3. Low-Carbon Growth Planning: Issues & Challenges | Open Energy...

    Open Energy Info (EERE)

    World Bank Sector: Energy, Land Topics: Low emission development planning Resource Type: Lessons learnedbest practices, Presentation Website: www.esmap.orgesmapnode788...

  4. Low-Carbon Growth Plans: Advancing Good Practice | Open Energy...

    Open Energy Info (EERE)

    Sector: Energy, Land Topics: Low emission development planning Resource Type: Lessons learnedbest practices Website: www.project-catalyst.infoimagespublications...

  5. Property:NumberOfLowCarbonPrograms | Open Energy Information

    Open Energy Info (EERE)

    25) A Afghanistan + 0 + Albania + 0 + Algeria + 0 + American Samoa + 0 + Andorra + 0 + Angola + 0 + Anguilla + 0 + Antigua and Barbuda + 0 + Argentina + 0 + Armenia + 0 + Aruba + 0...

  6. Property:NumberOfLowCarbonPlanningProgramsAgriculture | Open...

    Open Energy Info (EERE)

    25) A Afghanistan + 0 + Albania + 0 + Algeria + 0 + American Samoa + 0 + Andorra + 0 + Angola + 1 + Anguilla + 0 + Antigua and Barbuda + 1 + Argentina + 4 + Armenia + 2 + Aruba + 0...

  7. Haiti-Designing and Communicating Low Carbon Energy Roadmaps...

    Open Energy Info (EERE)

    Partner International Climate Initiative Sector Climate, Energy Focus Area Renewable Energy, Buildings, Economic Development, Energy Efficiency, Greenhouse Gas, Grid Assessment...

  8. Low Carbon Jobs in an Interconnected World | Open Energy Information

    Open Energy Info (EERE)

    for Public Policy Research Sector Energy Focus Area Energy Efficiency, Renewable Energy Topics Co-benefits assessment, Background analysis Website http:www.ippr.org.uk...

  9. Mexico-Low-Carbon Development | Open Energy Information

    Open Energy Info (EERE)

    modal share of public urban transport and raising vehicle fuel efficiency; (b) generation of power in industry through cogeneration as a low cost power supply source, and...

  10. South Africa-Low Carbon Growth Strategy | Open Energy Information

    Open Energy Info (EERE)

    Assistance Program of the World Bank Sector Energy, Land Focus Area Energy Efficiency, Transportation Topics GHG inventory, Low emission development planning, Policies...

  11. Ghana-Supporting Low Carbon Growth | Open Energy Information

    Open Energy Info (EERE)

    of Technology and Environment (KITE) Sector Energy Focus Area Non-renewable Energy, Energy Efficiency, People and Policy Topics Background analysis, Baseline projection,...

  12. Mobilising private finance for low-carbon development | Open...

    Open Energy Info (EERE)

    from the LEDS Global Partnership. When to Use This Tool While building a low emission strategy for your country's transportation system, this tool is most useful during these...

  13. Ghana-Supporting Low Carbon Growth | Open Energy Information

    Open Energy Info (EERE)

    (KITE) Sector Energy Focus Area Non-renewable Energy, Energy Efficiency, People and Policy Topics Background analysis, Baseline projection, Co-benefits assessment, Low emission...

  14. Central Networks Low Carbon Hub Optimizing renewable energy resources...

    Open Energy Info (EERE)

    Other Additional Comments Cancel Submit Categories: Smart Grid Projects Smart Grid Projects in Europe Smart Grid Projects - Grid Automation Distribution Smart Grid Projects - Other...

  15. South Africa-Low Carbon Growth Strategy | Open Energy Information

    Open Energy Info (EERE)

    The top mitigation priorities were identified as: industrial energy efficiency, renewable energy, nuclear energy, modal shift through improved public transportation, and improved...

  16. Strengthening Planning Capacity for Low Carbon Growth in Developing...

    Open Energy Info (EERE)

    Growth in Developing Asia AgencyCompany Organization Asian Development Bank Partner Japan, United Kingdom Sector Climate, Energy Focus Area Non-renewable Energy, Buildings,...

  17. Philippines-Strengthening Planning Capacity for Low Carbon Growth...

    Open Energy Info (EERE)

    Growth in Developing Asia AgencyCompany Organization Asian Development Bank Partner Japan, United Kingdom Sector Climate, Energy Focus Area Non-renewable Energy, Buildings,...

  18. Indonesia-Strengthening Planning Capacity for Low Carbon Growth...

    Open Energy Info (EERE)

    Growth in Developing Asia AgencyCompany Organization Asian Development Bank Partner Japan, United Kingdom Sector Climate, Energy Focus Area Non-renewable Energy, Buildings,...

  19. Vietnam-Strengthening Planning Capacity for Low Carbon Growth...

    Open Energy Info (EERE)

    Growth in Developing Asia AgencyCompany Organization Asian Development Bank Partner Japan, United Kingdom Sector Climate, Energy Focus Area Non-renewable Energy, Buildings,...

  20. Method for the preparation of ferrous low carbon porous material

    SciTech Connect (OSTI)

    Miller, Curtis Jack

    2014-05-27

    A method for preparing a porous metal article using a powder metallurgy forming process is provided which eliminates the conventional steps associated with removing residual carbon. The method uses a feedstock that includes a ferrous metal powder and a polycarbonate binder. The polycarbonate binder can be removed by thermal decomposition after the metal article is formed without leaving a carbon residue.

  1. Brazil-Low Carbon Growth Studies Program | Open Energy Information

    Open Energy Info (EERE)

    and forestry (LULUCF), including deforestation; (ii) transport systems; (iii) energy production and use, particularly electricity, oil and gas and bio-fuels; and (iv) solid...

  2. Manganese partitioning in low carbon manganese steel during annealing

    SciTech Connect (OSTI)

    Lis, J.; Lis, A. Kolan, C.

    2008-08-15

    For 6Mn16 steel experimental soft annealing at 625 deg. C for periods from 1 h to 60 h and modeling with Thermo-Calc were performed to estimate the partitioning of alloying elements, in particular Mn, between ferrite, cementite and austenite. Using transmission electron microscopy and X-ray analysis it was established that the increase of Mn concentration in carbides to a level 7%-11.2% caused a local decrease of the Ac{sub 1} temperature and led to the presence of austenite around the carbides. Thus, after cooling, small bainite-martensite or bainite-martensite-retained austenite (BM-A) islands were observed. A dispersion of carbides and a coarsening process were observed. The measured amount of Mn in the carbides was in good agreement with theoretical predictions.

  3. Preliminary Study on Sustainable Low-Carbon Development Towards...

    Open Energy Info (EERE)

    change. Up to now, we have approached this problem with integrated assessment methodology, in which we proposed a systematic design methodology of future LCS towards the...

  4. DOE Announces Clean Energy Projects for Low-Carbon Communities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE and NREL have selected the following three projects under the LCCA: Energy Efficiency Center in Costa Rica The government of Costa Rica, along with the Natural Resources ...

  5. Low Carbon Society Toward 2050: Indonesia Energy Sector | Open...

    Open Energy Info (EERE)

    for Global Environmental Strategies, Mizuho Information & Research Institute - Japan, Kyoto University, Institut Teknologi Bandung (ITB) - Indonesia Sector: Energy Focus...

  6. DOE Announces Clean Energy Projects for Low-Carbon Communities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of the Americas (LCCA) - a program launched in June 2009 to assist countries in Latin America with sustainable energy market transformation initiatives. "DOE is committed to ...

  7. Solids mass flow indication with radiation

    DOE Patents [OSTI]

    Macko, Joseph E. (Irwin, PA); Estriplet, Isnard (Irwin, PA)

    1985-06-04

    Method and apparatus for indicating mass flow of a solid particulate material through a rotary feeder. A radiation source and detector are positioned in a manner whereby radiation flux is directed through, and attenuated by, particulate material contained in rotating pockets. A Cesium-137 gamma source can be mounted within the shaft of the feeder, and one or more detectors can be mounted outside of the feeder housing. The detected signal is indicative of the mass of particulate material contained within a given pocket rotating within the feeder.

  8. Energy Intensity Indicators: Industrial Source Energy Consumption |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Industrial Source Energy Consumption Energy Intensity Indicators: Industrial Source Energy Consumption The industrial sector comprises manufacturing and other nonmanufacturing industries not included in transportation or services. Manufacturing includes 18 industry sectors, generally defined at the three-digit level of the North American Industrial Classification System (NAICS). The nonmanufacturing sectors are agriculture, forestry and fisheries, mining, and

  9. 1-2-3 - Economic Indicators.123

    National Nuclear Security Administration (NNSA)

    Economic Indicators Indicator Date Latest Period Previous Period Year Ago Change Month Ago Change Year Ago New Residents (Drivers License Count) December 2009 4,311 4,031 4,656 6.9% -7.4% Active Residential Electric Meter Count January 2010 725,094 724,986 727,892 0.0% -0.4% Total Employment December 2009 833,000 842,800 899,700 -1.2% -7.4% Unemployment Rate December 2009 13.1% 12.1% 8.7% 8.3% 50.6% New Home Sales* January 2010 240 477 284 -49.7% -15.5% New Home Permits January 2010 380 355 179

  10. National Climate Assessment Indicators: Background, Development, & Examples

    SciTech Connect (OSTI)

    Janetos, Anthony C.; Chen, Robert; Arndt, Deke; Kenney, Melissa A.; Abbasi, Daniel; Armstrong, Tom; Bartuska, Ann; Blair, Maria; Buizer, Jim; Dietz, Tom; Easterling, Dave; Kaye, Jack; Kolian, Michael; McGeehin, Michael; O'Connor, Robert; Pulwarty, Roger; Running, Steve; Schmalensee, Dick; Webb, Robert; Weltzin, Jake; Baptista, Sandra; Enquist, Carolyn A.; Janetos, Anthony C.; Chen, Robert; Arndt, Deke; Hatfield, Jerry; Hayes, Mark L.; Jones, K. Burce; McNutt, Chad; Meier, Wayne R.; Schwartz, Mark D.; Svoboda, Mark

    2012-02-28

    Indicators are usually thought of as measurements or calculations that represent important features of the status, trend, or performance of a system of interest (e.g. the economy, agriculture, air quality). They are often used for the most practical of reasons one cannot measure everything important about systems of interest, so there is a practical need to identify major features that can be reported periodically and used to guide both research and decisions (NRC 2000).

  11. Residential market transformation: National and regional indicators

    SciTech Connect (OSTI)

    Van Wie McGrory, Laura L.; McNamara, Maureen; Suozzo, Margaret

    2000-06-01

    A variety of programs are underway to address market barriers to the adoption of energy-efficient residential technologies and practices. Most are administered by utilities, states, or regions that rely on the Energy Star as a consistent platform for program marketing and messaging. This paper reviews regional and national market transformation activities for three key residential end-uses -- air conditioning, clothes washing, and lighting -- characterizing current and ongoing programs; reporting on progress; identifying market indicators; and discussing implications.

  12. Experiment Indicates Sound Waves Can Trigger Quakes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    'memory' could spur aftershocks January 3, 2008 Experiment Indicates Sound Waves Can Trigger Quakes LOS ALAMOS, New Mexico, January 3, 2008-Using a novel device that simulates earthquakes in a laboratory setting, a Los Alamos researcher and his colleagues have shown that seismic waves-the sounds radiated from earthquakes-can induce earthquake aftershocks, often long after a quake has subsided. The research provides insight into how earthquakes may be triggered and how they recur. In a letter

  13. Energy Intensity Indicators: Residential Source Energy Consumption |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Residential Source Energy Consumption Energy Intensity Indicators: Residential Source Energy Consumption Figure R1 below reports as index numbers over the period 1970 through 2011: 1) the number of U.S. households, 2) the average size of those housing units, 3) residential source energy consumption, 4) energy intensity, and 5) an overall structural component that represents "other explanatory factors." Activity: Since 1970, the number of household (occupied

  14. Turbine airfoil with outer wall thickness indicators

    DOE Patents [OSTI]

    Marra, John J; James, Allister W; Merrill, Gary B

    2013-08-06

    A turbine airfoil usable in a turbine engine and including a depth indicator for determining outer wall blade thickness. The airfoil may include an outer wall having a plurality of grooves in the outer surface of the outer wall. The grooves may have a depth that represents a desired outer surface and wall thickness of the outer wall. The material forming an outer surface of the outer wall may be removed to be flush with an innermost point in each groove, thereby reducing the wall thickness and increasing efficiency. The plurality of grooves may be positioned in a radially outer region of the airfoil proximate to the tip.

  15. Energy Intensity Indicators: Electricity Generation Energy Intensity |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Electricity Generation Energy Intensity Energy Intensity Indicators: Electricity Generation Energy Intensity A kilowatt-hour (kWh) of electric energy delivered to the final user has an energy equivalent to 3,412 British thermal units (Btu). Figure E1, below, tracks how much energy was used by the various categories of electricity generators to produce a kWh of electricity (i.e., the heat rate). As shown in the figure, in 1950, central power plants producing only

  16. FIELD TEST OF THE FLAME QUALITY INDICATOR

    SciTech Connect (OSTI)

    Andrew M. Rudin; Thomas Butcher; Henry Troost

    2003-02-04

    The flame quality indicator concept was developed at BNL specifically to monitor the brightness of the flame in a small oil burner and to provide a ''call for service'' notification when the brightness has changed from its setpoint, either high or low. In prior development work BNL has explored the response of this system to operational upsets such as excess air changes, fouled atomizer nozzles, poor fuel quality, etc. Insight Technologies, Inc. and Honeywell, Inc. have licensed this technology from the U.S. Department of Energy and have been cooperating to develop product offerings which meet industry needs with an optimal combination of function and price. Honeywell has recently completed the development of the Flame Quality Monitor (FQM or Honeywell QS7100F). This is a small module which connects via a serial cable to the burners primary operating control. Primary advantages of this approach are simplicity, cost, and ease of installation. Call-for-service conditions are output in the form of front panel indicator lights and contact closure which can trigger a range of external communication options. Under this project a field test was conducted of the FQM in cooperation with service organizations in Virginia, Pennsylvania, New Jersey, New York, and Connecticut. At total of 83 field sites were included. At each site the FQM was installed in parallel with another embodiment of this concept--the Insight AFQI. The AFQI incorporates a modem and provides the ability to provide detailed information on the trends in the flame quality over the course of the two year test period. The test site population was comprised of 79.5% boilers, 13.7% warm air furnaces, and 6.8% water heaters. Nearly all were of residential size--with firing rates ranging from 0.6 gallons of oil per hour to 1.25. During the course of the test program the monitoring equipment successfully identified problems including: plugged fuel lines, fouled nozzles, collapsed combustion chambers, and poor fuel pump cut-off. Service organizations can use these early indications to reduce problems and service costs. There were also some ''call-for-service'' indications for which problems were not identified. The test program also showed that monitoring of the flame can provide information on burner run times and this can be used to estimate current oversize factors and to determine actual fuel usage, enabling more efficient fuel delivery procedures.

  17. Cosmological data and indications for new physics

    SciTech Connect (OSTI)

    Benetti, Micol; Gerbino, Martina; Melchiorri, Alessandro; Pagano, Luca; Kinney, William H.; Kolb, Edward W.; Lattanzi, Massimiliano; Riotto, Antonio E-mail: martina.gerbino@roma1.infn.it E-mail: Rocky.Kolb@uchicago.edu E-mail: alessandro.melchiorri@roma1.infn.it E-mail: antonio.riotto@unige.ch

    2013-10-01

    Data from the Atacama Cosmology Telescope (ACT) and the South Pole Telescope (SPT), combined with the nine-year data release from the WMAP satellite, provide very precise measurements of the cosmic microwave background (CMB) angular anisotropies down to very small angular scales. Augmented with measurements from Baryonic Acoustic Oscillations surveys and determinations of the Hubble constant, we investigate whether there are indications for new physics beyond a Harrison-Zel'dovich model for primordial perturbations and the standard number of relativistic degrees of freedom at primordial recombination. All combinations of datasets point to physics beyond the minimal Harrison-Zel'dovich model in the form of either a scalar spectral index different from unity or additional relativistic degrees of freedom at recombination (e.g., additional light neutrinos). Beyond that, the extended datasets including either ACT or SPT provide very different indications: while the extended-ACT (eACT) dataset is perfectly consistent with the predictions of standard slow-roll inflation, the extended-SPT (eSPT) dataset prefers a non-power-law scalar spectral index with a very large variation with scale of the spectral index. Both eACT and eSPT favor additional light degrees of freedom on top of the Harrison-Zel'dovich model. eACT is consistent with zero neutrino masses, while eSPT favors nonzero neutrino masses at more than 95% confidence.

  18. Physical security and tamper-indicating devices

    SciTech Connect (OSTI)

    Johnston, R.G.; Garcia, A.R.E.

    1997-02-01

    Computer systems, electronic communications, digital data, and computer storage media are often highly vulnerable to physical tampering. Tamper-indicating devices, also called security seals, are widely used to detect physical tampering or unauthorized access. We studied 94 different security seals, both passive and electronic, developed either commercially or by the US government. Most of these seals are in wide-spread use, including for critical applications. We learned how to defeat all 94 seals using rapid, inexpensive, low-tech methods. Cost was not a good predictor of seal security. It appears to us that many of these seals can be dramatically improved with minor, low-cost modifications to either the seal or the use protocol.

  19. Non-intrusive refrigerant charge indicator

    DOE Patents [OSTI]

    Mei, Viung C.; Chen, Fang C.; Kweller, Esher

    2005-03-22

    A non-intrusive refrigerant charge level indicator includes a structure for measuring at least one temperature at an outside surface of a two-phase refrigerant line section. The measured temperature can be used to determine the refrigerant charge status of an HVAC system, and can be converted to a pressure of the refrigerant in the line section and compared to a recommended pressure range to determine whether the system is under-charged, properly charged or over-charged. A non-intrusive method for assessing the refrigerant charge level in a system containing a refrigerant fluid includes the step of measuring a temperature at least one outside surface of a two-phase region of a refrigerant containing refrigerant line, wherein the temperature measured can be converted to a refrigerant pressure within the line section.

  20. Energy Performance Indicator Tool | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    The EnPI V4.0 is a regression analysis based tool developed by the U.S. Department of Energy to help plant and corporate managers establish a normalized baseline of energy consumption, track annual progress of intensity improvements, energy savings, Superior Energy Performance (SEP) EnPIs, and other EnPIs that account for variations due to weather, production, and other variables. The tool is designed to accommodate multiple users including Better Buildings, Better Plants Program and Challenge

  1. Diagnostic indicators for integrated assessment models of climate policy

    SciTech Connect (OSTI)

    Kriegler, Elmar; Petermann, Nils; Krey, Volker; Schwanitz, Jana; Luderer, Gunnar; Ashina, Shuichi; Bosetti, Valentina; Eom, Jiyong; Kitous, Alban; Mejean, Aurelie; Paroussos, Leonidas; Sano, Fuminori; Turton, Hal; Wilson, Charlie; Van Vuuren, Detlef

    2015-01-01

    Integrated assessments of how climate policy interacts with energy-economic systems can be performed by a variety of models with different functional structures. This article proposes a diagnostic scheme that can be applied to a wide range of integrated assessment models to classify differences among models based on their carbon price responses. Model diagnostics can uncover patterns and provide insights into why, under a given scenario, certain types of models behave in observed ways. Such insights are informative since model behavior can have a significant impact on projections of climate change mitigation costs and other policy-relevant information. The authors propose diagnostic indicators to characterize model responses to carbon price signals and test these in a diagnostic study with 11 global models. Indicators describe the magnitude of emission abatement and the associated costs relative to a harmonized baseline, the relative changes in carbon intensity and energy intensity and the extent of transformation in the energy system. This study shows a correlation among indicators suggesting that models can be classified into groups based on common patterns of behavior in response to carbon pricing. Such a classification can help to more easily explain variations among policy-relevant model results.

  2. Social vulnerability indicators as a sustainable planning tool

    SciTech Connect (OSTI)

    Lee, Yung-Jaan

    2014-01-15

    In the face of global warming and environmental change, the conventional strategy of resource centralization will not be able to cope with a future of increasingly extreme climate events and related disasters. It may even contribute to inter-regional disparities as a result of these events. To promote sustainable development, this study offers a case study of developmental planning in Chiayi, Taiwan and a review of the relevant literature to propose a framework of social vulnerability indicators at the township level. The proposed framework can not only be used to measure the social vulnerability of individual townships in Chiayi, but also be used to capture the spatial developmental of Chiayi. Seventeen social vulnerability indicators provide information in five dimensions. Owing to limited access to relevant data, the values of only 13 indicators were calculated. By simply summarizing indicators without using weightings and by using zero-mean normalization to standardize the indicators, this study calculates social vulnerability scores for each township. To make social vulnerability indicators more useful, this study performs an overlay analysis of social vulnerability and patterns of risk associated with national disasters. The social vulnerability analysis draws on secondary data for 2012 from Taiwan's National Geographic Information System. The second layer of analysis consists of the flood potential ratings of the Taiwan Water Resources Agency as an index of biophysical vulnerability. The third layer consists of township-level administrative boundaries. Analytical results reveal that four out of the 18 townships in Chiayi not only are vulnerable to large-scale flooding during serious flood events, but also have the highest degree of social vulnerability. Administrative boundaries, on which social vulnerability is based, do not correspond precisely to cross-administrative boundaries, which are characteristics of the natural environment. This study adopts an exploratory approach that provides Chiayi and other government agencies with a foundation for sustainable strategic planning for environmental change. The final section offers four suggestions concerning the implications of social vulnerability for local development planning. -- Highlights: This study proposes a framework of social vulnerability indicators at the township level in Chiayi County, Taiwan. Seventeen social vulnerability indicators are categorized into four dimensions. This study performs a three-layer overlay analysis of social vulnerability and natural disaster risk patterns. 4 out of the 18 townships not only have potential for large-scale flooding, but also high degree of social vulnerability. This study provides a foundation for sustainable strategic planning to deal with environmental change. Four suggestions are proposed regarding the implications of social vulnerability for local development planning.

  3. Development of Refrigerant Change Indicator and Dirty Air Filter Sensor

    SciTech Connect (OSTI)

    Mei, V.

    2003-06-24

    The most common problems affecting residential and light commercial heating, ventilation, and air-conditioning (HVAC) systems are slow refrigerant leaks and dirty air filters. Equipment users are usually not aware of a problem until most of the refrigerant has escaped or the air filter is clogged with dirt. While a dirty air filter can be detected with a technology based on the air pressure differential across the filter, such as a ''whistling'' indicator, it is not easy to incorporate this technology into existing HVAC diagnostic equipment. Oak Ridge National Laboratory is developing a low-cost, nonintrusive refrigerant charge indicator and dirty air filter detection sensor. The sensors, based on temperature measurements, will be inexpensive and easy to incorporate into existing heat pumps and air conditioners. The refrigerant charge indicator is based on the fact that when refrigerant starts to leak, the evaporator coil temperature starts to drop and the level of liquid subcooling drops. When the coil temperature or liquid subcooling drops below a preset reading, a signal, such as a yellow warning light, can be activated to warn the equipment user that the system is undercharged. A further drop of coil temperature or liquid subcooling below another preset reading would trigger a second warning signal, such as a red warning light, to warn the equipment user that the unit now detects a leak and immediate action should be taken. The warning light cannot be turned off until it is re-set by a refrigeration repairman. To detect clogged air filters, two additional temperature sensors can be applied, one each across the evaporator. When the air filter is accumulating buildup, the temperature differential across the evaporator will increase because of the reduced airflow. When the temperature differential reaches a pre-set reading, a signal will be sent to the equipment user that the air filter needs to be changed. A traditional refrigerant charge indicator requires intrusion into the system to measure the refrigerant high-side and low-side pressures. Once the pressures are known, based on the equipment's refrigerant charging chart? or in most cases, based on the technician's experience? the refrigerant charging status is determined. However, there is a catch: by the time a refrigeration technician is called, most of the refrigerant has already escaped into the atmosphere. The new technology provides a real-time warning so that when, say, 20% of the refrigerant has leaked, the equipment users will be warned, even though the equipment is still functioning properly at rated capacity. Temperature sensors are becoming very accurate and very low in cost, compared with pressure sensors. Using temperature sensors to detect refrigerant charge status is inherently nonintrusive, inexpensive, and accurate. With the addition of two temperature sensors for detecting dirty air filters, the capability of the diagnostic equipment is further enhanced with very little added cost. This report provides laboratory test data on the change of indoor coil refrigerant temperature and subcooling as a function of refrigerant charge for a 2-ton split heat pump system. The data can be used in designing the indicators for refrigerant loss and dirty air filter sensors.

  4. Climate Analysis Indicators Tool (CAIT) | Open Energy Information

    Open Energy Info (EERE)

    Climate Analysis Indicators Tool (CAIT) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: WRI Climate Analysis Indicators Tool AgencyCompany Organization: World...

  5. Climate Analysis Indicators Tool (CAIT) | Open Energy Information

    Open Energy Info (EERE)

    Climate Analysis Indicators Tool (CAIT) (Redirected from WRI Climate Analysis Indicators Tool) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: WRI Climate Analysis...

  6. Climate Analysis Indicators Tool (CAIT) | Open Energy Information

    Open Energy Info (EERE)

    Climate Analysis Indicators Tool (CAIT) (Redirected from Climate Analysis Indicators Tool) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: WRI Climate Analysis...

  7. Computer Simulations Indicate Calcium Carbonate Has a Dense Liquid...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computer Simulations Indicate Calcium Carbonate Has a Dense Liquid Phase Computer Simulations Indicate Calcium Carbonate Has a Dense Liquid Phase Berkeley Lab research could help...

  8. Insertion of operation-and-indicate instructions for optimized SIMD code

    DOE Patents [OSTI]

    Eichenberger, Alexander E; Gara, Alan; Gschwind, Michael K

    2013-06-04

    Mechanisms are provided for inserting indicated instructions for tracking and indicating exceptions in the execution of vectorized code. A portion of first code is received for compilation. The portion of first code is analyzed to identify non-speculative instructions performing designated non-speculative operations in the first code that are candidates for replacement by replacement operation-and-indicate instructions that perform the designated non-speculative operations and further perform an indication operation for indicating any exception conditions corresponding to special exception values present in vector register inputs to the replacement operation-and-indicate instructions. The replacement is performed and second code is generated based on the replacement of the at least one non-speculative instruction. The data processing system executing the compiled code is configured to store special exception values in vector output registers, in response to a speculative instruction generating an exception condition, without initiating exception handling.

  9. Energy efficiency indicators for high electric-load buildings

    SciTech Connect (OSTI)

    Aebischer, Bernard; Balmer, Markus A.; Kinney, Satkartar; Le Strat, Pascale; Shibata, Yoshiaki; Varone, Frederic

    2003-06-01

    Energy per unit of floor area is not an adequate indicator for energy efficiency in high electric-load buildings. For two activities, restaurants and computer centres, alternative indicators for energy efficiency are discussed.

  10. 1Q CY2000 (PDF), Facility Representative Program Performance Indicators

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quarterly Report | Department of Energy Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report 1Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report "The Facility Representative Program Performance Indicators (PIs) Quarterly Report is attached, covering the period from January 2000 to March 2000. Data for these indicators are gathered by the Field elements quarterly per the Facility Representatives Standard, DOE-STD-1

  11. 4Q CY2000 (PDF), Facility Representative Program Performance Indicators

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quarterly Report | Department of Energy 4Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report 4Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report "The Facility Representative Program Performance Indicators Quarterly Report is attached, covering the period from October to December 2000. Data for these indicators are gathered by the Field elements quarterly per the Facility Representatives Standard, 063, and reported

  12. Advantages and limitations of exergy indicators to assess sustainability of bioenergy and biobased materials

    SciTech Connect (OSTI)

    Maes, Dries Van Passel, Steven

    2014-02-15

    Innovative bioenergy projects show a growing diversity in biomass pathways, transformation technologies and end-products, leading to complex new processes. Existing energy-based indicators are not designed to include multiple impacts and are too constrained to assess the sustainability of these processes. Alternatively, indicators based on exergy, a measure of “qualitative energy”, could allow a more holistic view. Exergy is increasingly applied in analyses of both technical and biological processes. But sustainability assessments including exergy calculations, are not very common and are not generally applicable to all types of impact. Hence it is important to frame the use of exergy for inclusion in a sustainability assessment. This paper reviews the potentials and the limitations of exergy calculations, and presents solutions for coherent aggregation with other metrics. The resulting approach is illustrated in a case study. Within the context of sustainability assessment of bioenergy, exergy is a suitable metric for the impacts that require an ecocentric interpretation, and it allows aggregation on a physical basis. The use of exergy is limited to a measurement of material and energy exchanges with the sun, biosphere and lithosphere. Exchanges involving services or human choices are to be measured in different metrics. This combination provides a more inclusive and objective sustainability assessment, especially compared to standard energy- or carbon-based indicators. Future applications of this approach in different situations are required to clarify the potential of exergy-based indicators in a sustainability context. -- Highlights: • Innovative bioenergy projects require more advanced sustainability assessments to incorporate all environmental impacts. • Exergy-based indicators provide solutions for objective and robust measurements. • The use of exergy in a sustainability assessment is limited to material exchanges, excluding exchanges with society. • The combination of exergy-based indicators with other indicators is very appropriate. • But this is only rarely applied.

  13. Passive Tamper Indicating Enclosures Incorporating Embedded Optical Fibre

    SciTech Connect (OSTI)

    Wynn, Paul; White, Helen; Allen, Keir; Simmons, Kevin L.; Sliva, Paul; Benz, Jacob M.; Tanner, Jennifer E.

    2011-08-14

    AWE and PNNL are engaged in a technical collaboration investigating techniques to enhance continuity of knowledge over Accountable Items within a verified nuclear weapons dismantlement process. Tamper Indicating Enclosures (TIE) will likely be deployed as part of a chain of custody regime to indicate an unauthorised attempt to access an Accountable Item. This paper looks at the use of passive TIEs incorporating embedded optical fibre; concepts relating to deployment, tamper indication and unique identification will be discussed.

  14. Energy Intensity Indicators: Terminology and Definitions | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Terminology and Definitions Energy Intensity Indicators: Terminology and Definitions The Energy Intensity Indicators website uses the following terms with their associated definitions. The terms related to various definitions of energy are discussed first. Three separate definitions of energy are used in the system of indicators: 1) delivered, 2) source, and 3) source, adjusted for electricity generation efficiency change. These definitions are discussed below. Delivered energy is the

  15. DSOPilot project Automatic receipt of short circuiting indicators...

    Open Energy Info (EERE)

    project Automatic receipt of short circuiting indicators Country Denmark Coordinates 56.26392, 9.501785 Loading map... "minzoom":false,"mappingservice":"googlemaps3","type...

  16. GEOTHERMAL FLUID PROPENE AND PROPANE: INDICATORS OF FLUID | Open...

    Open Energy Info (EERE)

    FLUID PROPENE AND PROPANE: INDICATORS OF FLUID Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: GEOTHERMAL FLUID PROPENE AND PROPANE:...

  17. Criteria and Indicators for Sustainable Woodfuels | Open Energy...

    Open Energy Info (EERE)

    Type: Guidemanual Website: www.fao.orgdocrep012i1673ei1673e00.pdf Criteria and Indicators for Sustainable Woodfuels Screenshot References: Sustainable Woodfuels1...

  18. Eco-efficiency Indicators: Measuring Resource-use Efficiency...

    Open Energy Info (EERE)

    Eco-efficiency Indicators: Measuring Resource-use Efficiency and the Impact of Economic Activities on the Environment Jump to: navigation, search Tool Summary LAUNCH TOOL Name:...

  19. Policy Applications of Energy Indicators | Open Energy Information

    Open Energy Info (EERE)

    on the ISED programme. To read the full issue, click here. The special issue features articles highlighting how energy indicators were developed, refined and tested by...

  20. Environmental indicators for sustainable production of algal biofuels

    SciTech Connect (OSTI)

    Efroymson, Rebecca Ann; Dale, Virginia H

    2014-01-01

    For analyzing sustainability of algal biofuels, we identify 16 environmental indicators that fall into six categories: soil quality, water quality and quantity, air quality, greenhouse gas emissions, biodiversity, and productivity. Indicators are selected to be practical, widely applicable, predictable in response, anticipatory of future changes, independent of scale, and responsive to management. Major differences between algae and terrestrial plant feedstocks, as well as their supply chains for biofuel, are highlighted, for they influence the choice of appropriate sustainability indicators. Algae strain selection characteristics do not generally affect which indicators are selected. The use of water instead of soil as the growth medium for algae determines the higher priority of water- over soil-related indicators. The proposed set of environmental indicators provides an initial checklist for measures of biofuel sustainability but may need to be modified for particular contexts depending on data availability, goals of the stakeholders, and financial constraints. Use of these indicators entails defining sustainability goals and targets in relation to stakeholder values in a particular context and can lead to improved management practices.

  1. Environmental indicators of biofuel sustainability: What about context?

    SciTech Connect (OSTI)

    Efroymson, Rebecca Ann; Dale, Virginia H; Kline, Keith L; McBride, Allen; Bielicki, Jeffrey M; Smith, Raymond; Parish, Esther S; Schweizer, Peter E; Shaw, Denice

    2013-01-01

    Indicators of the environmental sustainability of biofuel production, distribution, and use should be selected, measured, and interpreted with respect to the context in which they are used. These indicators include measures of soil quality, water quality and quantity, greenhouse-gas emissions, biodiversity, air quality, and vegetation productivity. Contextual considerations include the purpose for the sustainability analysis, the particular biofuel production and distribution system (including supply chain, management aspects, and system viability), policy conditions, stakeholder values, location, temporal influences, spatial scale, baselines, and reference scenarios. Recommendations presented in this paper include formulating the problem for particular analyses, selecting appropriate context-specific indicators of environmental sustainability, and developing indicators that can reflect multiple environmental properties at low cost within a defined context. In addition, contextual considerations such as technical objectives, varying values and perspectives of stakeholder groups, and availability and reliability of data need to be understood and considered. Sustainability indicators for biofuels are most useful if adequate historical data are available, information can be collected at appropriate spatial and temporal scales, organizations are committed to use indicator information in the decision-making process, and indicators can effectively guide behavior toward more sustainable practices.

  2. Environmental indicators for sustainable production of algal biofuels

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Efroymson, Rebecca A.; Dale, Virginia H.

    2014-10-01

    For analyzing sustainability of algal biofuels, we identify 16 environmental indicators that fall into six categories: soil quality, water quality and quantity, air quality, greenhouse gas emissions, biodiversity, and productivity. Indicators are selected to be practical, widely applicable, predictable in response, anticipatory of future changes, independent of scale, and responsive to management. Major differences between algae and terrestrial plant feedstocks, as well as their supply chains for biofuel, are highlighted, for they influence the choice of appropriate sustainability indicators. Algae strain selection characteristics do not generally affect which indicators are selected. The use of water instead of soil as themore » growth medium for algae determines the higher priority of water- over soil-related indicators. The proposed set of environmental indicators provides an initial checklist for measures of biofuel sustainability but may need to be modified for particular contexts depending on data availability, goals of the stakeholders, and financial constraints. Ultimately, use of these indicators entails defining sustainability goals and targets in relation to stakeholder values in a particular context and can lead to improved management practices.« less

  3. A New Collaborative Tool for Visually Understanding National Health Indicators

    SciTech Connect (OSTI)

    Xu, Songhua; Jewell, Brian C; Steed, Chad A; Schryver, Jack C

    2012-01-01

    The authors propose a new online collaborative tool for visually understanding national health indicators, which facilitates the full spectrum of investigation of indicators, from an overview of all the correlation coefficients between variables, to investigation of subsets of selected variables, and to individual data element analysis. this tool is publicly accessible at http://cda.ornl.gov/heat/heatmap.html. In this paper, they discuss the key issues regarding the interface design and implementation. They also illustrate how to use their interface for analyzing the health indicator dataset by showing some key system views. In the end, they introduce and discuss some ongoing research efforts extending this work.

  4. Figure ES2. Annual Indices of Real Disposable Income, Vehicle...

    U.S. Energy Information Administration (EIA) Indexed Site

    ES2 Figure ES2. Annual Indices of Real Disposable Income, Vehicle-Miles Traveled, Consumer Price Index (CPI-U), and Real Average Retail Gasoline Price, 1978-2004, 1985100...

  5. Type Ia Supernova Spectral Line Ratios as LuminosityIndicators

    SciTech Connect (OSTI)

    Bongard, Sebastien; Baron, E.; Smadja, G.; Branch, David; Hauschildt, Peter H.

    2005-12-07

    Type Ia supernovae have played a crucial role in thediscovery of the dark energy, via the measurement of their light curvesand the determination of the peak brightness via fitting templates to theobserved lightcurve shape. Two spectroscopic indicators are also known tobe well correlated with peak luminosity. Since the spectroscopicluminosity indicators are obtained directly from observed spectra, theywill have different systematic errors than do measurements usingphotometry. Additionally, these spectroscopic indicators may be usefulfor studies of effects of evolution or age of the SNe~;Ia progenitorpopulation. We present several new variants of such spectroscopicindicators which are easy to automate and which minimize the effects ofnoise. We show that these spectroscopic indicators can be measured byproposed JDEM missions such as snap and JEDI.

  6. Towards Optimal Multi-Dimensional Query Processing with BitmapIndices

    SciTech Connect (OSTI)

    Rotem, Doron; Stockinger, Kurt; Wu, Kesheng

    2005-09-30

    Bitmap indices have been widely used in scientific applications and commercial systems for processing complex, multi-dimensional queries where traditional tree-based indices would not work efficiently. This paper studies strategies for minimizing the access costs for processing multi-dimensional queries using bitmap indices with binning. Innovative features of our algorithm include (a) optimally placing the bin boundaries and (b) dynamically reordering the evaluation of the query terms. In addition, we derive several analytical results concerning optimal bin allocation for a probabilistic query model. Our experimental evaluation with real life data shows an average I/O cost improvement of at least a factor of 10 for multi-dimensional queries on datasets from two different applications. Our experiments also indicate that the speedup increases with the number of query dimensions.

  7. Computer Simulations Indicate Calcium Carbonate Has a Dense Liquid Phase

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computer Simulations Indicate Calcium Carbonate Has a Dense Liquid Phase Computer Simulations Indicate Calcium Carbonate Has a Dense Liquid Phase Berkeley Lab research could help scientists predict how carbon is stored underground August 22, 2013 Dan Krotz 510-486-4019 dakrotz@lbl.gov red2.jpg Artistic rendition of liquid-liquid separation in a supersaturated calcium carbonate solution. New research suggests that a dense liquid phase (shown in red in the background and in full atomistic detail

  8. Peer groups and operational cycle enhancements to the performance indicator report

    SciTech Connect (OSTI)

    Stromberg, H.M.; DeHaan, M.S.; Gentillon, C.D.; Wilson, G.E.; Vanden Heuvel, L.N.

    1992-12-01

    Accurate performance evaluation and plant trending by the performance indicator program are integral parts of monitoring the operation of commercial nuclear power plants. The presentations of the NRC/AEOD performance indicator program have undergone a number of enhancements. The diversity of the commercial nuclear plants, coupled with continued improvements in the performance indicator program, has resulted in the evaluation of plants in logical peer groups and highlighted the need to evaluate the impact of plant operational conditions on the performance indicators. These enhancements allow a more-meaningful evaluation of operating commercial nuclear power plant performance. This report proposes methods to enhance the presentation of the performance indicator data by analyzing the data in logical peer groups and displaying the performance indicator data based on the operational status of the plants. Previously, preliminary development of the operational cycle displays of the performance indicator data was documented. This report extends the earlier findings and presents the continued development of the peer groups and operational cycle trend and deviation data and displays. This report describes the peer groups and enhanced PI data presentations by considering the operational cycle phase breakdowns, calculation methods, and presentation methods.

  9. Apparatus for indication of at least one subsurface barrier characteristic

    DOE Patents [OSTI]

    Richardson, John G.; Nickelson, Reva A.; Sloan, Paul A.; Kostelnik, Kevin M.

    2006-06-06

    A containment system for use adjacent to a selected region of a subterranean formation and comprising a plurality of laterally interlocked casing strings. At least one electrically conductive element is disposed along at least a portion of a casing string and is used for performing electrical time domain reflectometry. At least one protective element may be positioned between portions of adjacent casing strings of the barrier, and at least one electrically conductive element may be disposed at least partially within the at least one protective element for use in indicating at least one characteristic of at least a portion of the containment system. Electrical time domain reflectometry (TDR) may be used to indicate the at least one characteristic; for instance, TDR may be used to indicate leakage through the barrier or a discontinuity or void in a barrier filler material.

  10. When Galaxies Collide: Ripples Indicate Recent Impact Close to Home |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy When Galaxies Collide: Ripples Indicate Recent Impact Close to Home When Galaxies Collide: Ripples Indicate Recent Impact Close to Home June 28, 2012 - 11:16am Addthis This is a graphic representation of the Milky Way, the galaxy in which Earth is contained. Scientists know of more than 20 visible satellite galaxies that circle the center of the Milky Way, with masses ranging from one million to one billion solar masses. Occasionally, one of these orbiting galaxies pass

  11. DEVELOPMENT OF A CERAMIC TAMPER INDICATING SEAL: SRNL CONTRIBUTIONS

    SciTech Connect (OSTI)

    Krementz, D.; Brinkman, K.; Martinez-Rodriguez, M.; Mendez-Torres, A.; Weeks, G.

    2013-06-03

    Savannah River National Laboratory (SRNL) and Sandia National Laboratories (SNL) are collaborating on development of a Ceramic Seal, also sometimes designated the Intrinsically Tamper Indicating Ceramic Seal (ITICS), which is a tamper indicating seal for international safeguards applications. The Ceramic Seal is designed to be a replacement for metal loop seals that are currently used by the IAEA and other safeguards organizations. The Ceramic Seal has numerous features that enhance the security of the seal, including a frangible ceramic body, protective and tamper indicating coatings, an intrinsic unique identifier using Laser Surface Authentication, electronics incorporated into the seal that provide cryptographic seal authentication, and user-friendly seal wire capture. A second generation prototype of the seal is currently under development whose seal body is of Low Temperature Co-fired Ceramic (LTCC) construction. SRNL has developed the mechanical design of the seal in an iterative process incorporating comments from the SNL vulnerability review team. SRNL is developing fluorescent tamper indicating coatings, with recent development focusing on optimizing the durability of the coatings and working with a vendor to develop a method to apply coatings on a 3-D surface. SRNL performed a study on the effects of radiation on the electronics of the seal and possible radiation shielding techniques to minimize the effects. SRNL is also investigating implementation of Laser Surface Authentication (LSA) as a means of unique identification of each seal and the effects of the surface coatings on the LSA signature.

  12. Diagnostic and prognostic histopathology system using morphometric indices

    DOE Patents [OSTI]

    Parvin, Bahram; Chang, Hang; Han, Ju; Fontenay, Gerald V

    2015-05-12

    Determining at least one of a prognosis or a therapy for a patient based on a stained tissue section of the patient. An image of a stained tissue section of a patient is processed by a processing device. A set of features values for a set of cell-based features is extracted from the processed image, and the processed image is associated with a particular cluster of a plurality of clusters based on the set of feature values, where the plurality of clusters is defined with respect to a feature space corresponding to the set of features.

  13. NREL: Transmission Grid Integration - NREL Study Indicates Economic

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Potential for Wyoming Wind Transmission to California Study Indicates Economic Potential for Wyoming Wind Transmission to California March 24, 2014 A new study from the Energy Department's National Renewable Energy Laboratory (NREL) finds that the economic benefit of transmitting wind energy from Wyoming to the California energy market are likely to exceed the cost. The study, "California-Wyoming Grid Integration Study, Phase 1-Economic Analysis" was conducted by NREL for the

  14. Minimizing I/O Costs of Multi-Dimensional Queries with BitmapIndices

    SciTech Connect (OSTI)

    Rotem, Doron; Stockinger, Kurt; Wu, Kesheng

    2006-03-30

    Bitmap indices have been widely used in scientific applications and commercial systems for processing complex,multi-dimensional queries where traditional tree-based indices would not work efficiently. A common approach for reducing the size of a bitmap index for high cardinality attributes is to group ranges of values of an attribute into bins and then build a bitmap for each bin rather than a bitmap for each value of the attribute. Binning reduces storage costs,however, results of queries based on bins often require additional filtering for discarding it false positives, i.e., records in the result that do not satisfy the query constraints. This additional filtering,also known as ''candidate checking,'' requires access to the base data on disk and involves significant I/O costs. This paper studies strategies for minimizing the I/O costs for ''candidate checking'' for multi-dimensional queries. This is done by determining the number of bins allocated for each dimension and then placing bin boundaries in optimal locations. Our algorithms use knowledge of data distribution and query workload. We derive several analytical results concerning optimal bin allocation for a probabilistic query model. Our experimental evaluation with real life data shows an average I/O cost improvement of at least a factor of 10 for multi-dimensional queries on datasets from two different applications. Our experiments also indicate that the speedup increases with the number of query dimensions.

  15. USE OF CHEMICAL INVENTORY ACCURACY MEASUREMENTS AS LEADING INDICATORS

    SciTech Connect (OSTI)

    Kuntamukkula, M.

    2011-02-10

    Chemical safety and lifecycle management (CSLM) is a process that involves managing chemicals and chemical information from the moment someone begins to order a chemical and lasts through final disposition(1). Central to CSLM is tracking data associated with chemicals which, for the purposes of this paper, is termed the chemical inventory. Examples of data that could be tracked include chemical identity, location, quantity, date procured, container type, and physical state. The reason why so much data is tracked is that the chemical inventory supports many functions. These functions include emergency management, which depends upon the data to more effectively plan for, and respond to, chemical accidents; environmental management that uses inventory information to aid in the generation of various federally-mandated and other regulatory reports; and chemical management that uses the information to increase the efficiency and safety with which chemicals are stored and utilized. All of the benefits of having an inventory are predicated upon having an inventory that is reasonably accurate. Because of the importance of ensuring one's chemical inventory is accurate, many have become concerned about measuring inventory accuracy. But beyond providing a measure of confidence in information gleaned from the inventory, does the inventory accuracy measurement provide any additional function? The answer is 'Yes'. It provides valuable information that can be used as a leading indicator to gauge the health of a chemical management system. In this paper, we will discuss: what properties make leading indicators effective, how chemical inventories can be used as a leading indicator, how chemical inventory accuracy can be measured, what levels of accuracies should realistically be expected in a healthy system, and what a subpar inventory accuracy measurement portends.

  16. Tamper-indicating device having a glass body

    DOE Patents [OSTI]

    Johnston, Roger G. (Los Alamos, NM); Garcia, Anthony R. E. (Espanola, NM)

    2003-04-29

    A tamper-indicating device is described. The device has a first glass body member and a second glass body member that are attached to each other through a hasp. The glass body members of the device can be tempered. The body members can be configured with hollow volumes into which powders, microparticles, liquids, gels, or combinations thereof are sealed. The choice, the amount, and the location of these materials can produce a visible, band pattern to provide each body member with a unique fingerprint identifier, which makes it extremely difficult to repair or replace once it is damaged in order to avoid tamper detection.

  17. Indicator system for a process plant control complex

    DOE Patents [OSTI]

    Scarola, Kenneth (Windsor, CT); Jamison, David S. (Windsor, CT); Manazir, Richard M. (North Canton, CT); Rescorl, Robert L. (Vernon, CT); Harmon, Daryl L. (Enfield, CT)

    1993-01-01

    An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

  18. Efficient binning for bitmap indices on high-cardinality attributes

    SciTech Connect (OSTI)

    Rotem, Doron; Stockinger, Kurt; Wu, Kesheng

    2004-11-17

    Bitmap indexing is a common technique for indexing high-dimensional data in data warehouses and scientific applications. Though efficient for low-cardinality attributes, query processing can be rather costly for high-cardinality attributes due to the large storage requirements for the bitmap indices. Binning is a common technique for reducing storage costs of bitmap indices. This technique partitions the attribute values into a number of ranges, called bins, and uses bitmap vectors to represent bins (attribute ranges) rather than distinct values. Although binning may reduce storage costs, it may increase the access costs of queries that do not fall on exact bin boundaries (edge bins). For this kind of queries the original data values associated with edge bins must be accessed, in order to check them against the query constraints.In this paper we study the problem of finding optimal locations for the bin boundaries in order to minimize these access costs subject to storage constraints. We propose a dynamic programming algorithm for optimal partitioning of attribute values into bins that takes into account query access patterns as well as data distribution statistics. Mathematical analysis and experiments on real life data sets show that the optimal partitioning achieved by this algorithm can lead to a significant improvement in the access costs of bitmap indexing systems for high-cardinality attributes.

  19. Indicator system for advanced nuclear plant control complex

    DOE Patents [OSTI]

    Scarola, Kenneth; Jamison, David S.; Manazir, Richard M.; Rescorl, Robert L.; Harmon, Daryl L.

    1993-01-01

    An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

  20. Sensitivity Analysis of Dynamic Stability Indicators in Power Systems

    SciTech Connect (OSTI)

    Nguyen, Tony B.; Pai, M. A.

    2006-01-01

    Real time stability evaluation and preventive scheduling in power systems offers many challenges in a stressed power system. Through fast simulation of contingencies in real time it is possible to extract suitable information from the data and develop reliable metrics or indices to evaluate proximity of the system to an unstable condition. In this chapter we review the recent applications of the trajectory sensitivity analysis (TSA) technique in developing such indicators. Trajectory sensitivities can be used to compute critical parameters such as clearing time of circuit breakers, tie line flow, etc. in a power system by developing suitable norms for ease of interpretation. Alternatively it can be used along with the notion of Principal Singular Surfaces (PSS) to detect mode of instability (MOI). The TSA technique has the advantage that model complexity is not a limitation and the sensitivities are computed numerically. Suitable metrics are developed from these sensitivities. In addition to computing critical parameters, the TSA technique can be extended to do preventive rescheduling. A brief discussion of other applications of TSA is included as well as future areas of research.

  1. Indicators of waste management efficiency related to different territorial conditions

    SciTech Connect (OSTI)

    Passarini, Fabrizio, E-mail: fabrizio.passarini@unibo.it [University of Bologna, Dept. Industrial Chemistry and Materials, viale Risorgimento 4, I-40136 Bologna (Italy); Vassura, Ivano, E-mail: ivano.vassura@unibo.it [University of Bologna, Dept. Industrial Chemistry and Materials, viale Risorgimento 4, I-40136 Bologna (Italy); Monti, Francesco, E-mail: fmonti84@gmail.com [University of Bologna, Dept. Industrial Chemistry and Materials, viale Risorgimento 4, I-40136 Bologna (Italy); Morselli, Luciano, E-mail: luciano.morselli@unibo.it [University of Bologna, Dept. Industrial Chemistry and Materials, viale Risorgimento 4, I-40136 Bologna (Italy); Villani, Barbara, E-mail: bvillani@arpa.emr.it [Regional Environmental Protection Agency (Emilia-Romagna Region), Largo Caduti del Lavoro 6, I-40122 Bologna (Italy)

    2011-04-15

    The amount of waste produced and the control of separate collection are crucial issues for the planning of a territorial Integrated Waste Management System, enabling the allocation of each sorted waste fraction to the proper treatment and recycling processes. The present study focuses on assessing indicators of different waste management systems in areas characterized by different territorial conditions. The investigated case study concerns the municipalities of Emilia Romagna (northern Italy), which present a rather uniform socioeconomic situation, but a variety of geographic, urban and waste management characteristics. A survey of waste generation and collection rates was carried out, and correlated with the different territorial conditions, classifying the municipalities according to altitude and population density. The best environmental performances, in terms of high separate collection rate, were found on average in rural areas in the plain, while the lowest waste generation was associated with rural hill towns.

  2. Evaluating impacts of development and conservation projects using sustainability indicators: Opportunities and challenges

    SciTech Connect (OSTI)

    Agol, Dorice; Latawiec, Agnieszka E.; Strassburg, Bernardo B.N.

    2014-09-15

    There has been an increased interest in using sustainability indicators for evaluating the impacts of development and conservation projects. Past and recent experiences have shown that sustainability indicators can be powerful tools for measuring the outcomes of various interventions, when used appropriately and adequately. Currently, there is a range of methods for applying sustainability indicators for project impact evaluation at the environment–development interface. At the same time, a number of challenges persist which have implication for impact evaluation processes especially in developing countries. We highlight some key and recurrent challenges, using three cases from Kenya, Indonesia and Brazil. In this study, we have conducted a comparative analysis across multiple projects from the three countries, which aimed to conserve biodiversity and improve livelihoods. The assessments of these projects were designed to evaluate their positive, negative, short-term, long term, direct and indirect impacts. We have identified a set of commonly used sustainability indicators to evaluate the projects and have discussed opportunities and challenges associated with their application. Our analysis shows that impact evaluation processes present good opportunities for applying sustainability indicators. On the other hand, we find that project proponents (e.g. managers, evaluators, donors/funders) face challenges with establishing full impacts of interventions and that these are rooted in monitoring and evaluation processes, lack of evidence-based impacts, difficulties of measuring certain outcomes and concerns over scale of a range of impacts. We outline key lessons learnt from the multiple cases and propose ways to overcome common problems. Results from our analysis demonstrate practical experiences of applying sustainability indicators in developing countries context where there are different prevailing socio-economic, cultural and environmental conditions. The knowledge derived from this study may therefore be useful to a wider range of audience who are concerned with sustainable integration of development and environmental conservation. - Highlights: • Sustainability indicators are increasingly used for evaluating project impacts. • Lessons learnt are based on case studies from Africa, Asia and South America. • Similar challenges when assessing impacts of development and conservation projects • Need for pragmatic solutions to overcome challenges when assessing project impacts.

  3. Wireless remote liquid level detector and indicator for well testing

    DOE Patents [OSTI]

    Fasching, George E.; Evans, Donald M.; Ernest, John H.

    1985-01-01

    An acoustic system is provided for measuring the fluid level in oil, gas or water wells under pressure conditions that does not require an electrical link to the surface for level detection. A battery powered sound transmitter is integrated with a liquid sensor in the form of a conductivity probe, enclosed in a sealed housing which is lowered into a well by means of a wire line reel assembly. The sound transmitter generates an intense identifiable acoustic emission when the sensor contacts liquid in the well. The acoustic emissions propagate up the well which functions as a waveguide and are detected by an acoustic transducer. The output signal from the transducer is filtered to provide noise rejection outside of the acoustic signal spectrum. The filtered signal is used to indicate to an operator the liquid level in the well has been reached and the depth is read from a footage counter coupled with the wire line reel assembly at the instant the sound signal is received.

  4. Haiti-Low-Carbon Energy Roadmaps for the Greater Antilles | Open...

    Open Energy Info (EERE)

    Institute Partner Deutsche Gesellschaft fr Internationale Zusammenarbeit (GIZ) GmbH, National Energy Commission Sector Climate, Energy Focus Area Economic Development,...

  5. White Paper Powering Sustainable Low-Carbon Economies: Some Fact and Figures

    SciTech Connect (OSTI)

    Gilles J. Youinou

    2015-04-01

    In 2011, the world production of electricity was about 22.1 trillion kilowatt-hour1 (kWhe): 9.1 from coal, 4.8 from gas, 2.6 from nuclear, 1.1 from oil, 3.5 from hydropower and 1.0 from other sources (geothermal, solar, wind, biofuels). With a world population of about 7 billion in 2011, it corresponds to an average of 3,160 kWhe/year/capita. While most industrialized countries enjoy a high standard of living with, at least, 8,000 kWhe per year and per person, most developing countries live with less than 3,000 kWhe per year per person. The need for electricity is growing fast, especially in developing countries, and by 2040 the world production of electricity is projected to reach about 40 trillion kWhe.2 Assuming a world population of 10 billion and an average consumption of 6,000 kWhe per year per person in 2100 the world annual production of electricity could reach 60 trillion kWhe.

  6. Singapore-Low Carbon Asia Research Network (LoCARNet) | Open...

    Open Energy Info (EERE)

    Energy, Land Focus Area Agriculture, Biomass, Buildings, Economic Development, Energy Efficiency, Forestry, Geothermal, Greenhouse Gas, Hydrogen, Industry, Land Use, People and...

  7. Myanmar-Low Carbon Asia Research Network (LoCARNet) | Open Energy...

    Open Energy Info (EERE)

    Energy, Land Focus Area Agriculture, Biomass, Buildings, Economic Development, Energy Efficiency, Forestry, Geothermal, Greenhouse Gas, Hydrogen, Industry, Land Use, People and...

  8. Cambodia-Low Carbon Asia Research Network (LoCARNet) | Open Energy...

    Open Energy Info (EERE)

    Energy, Land Focus Area Agriculture, Biomass, Buildings, Economic Development, Energy Efficiency, Forestry, Geothermal, Greenhouse Gas, Hydrogen, Industry, Land Use, People and...

  9. Brunei-Low Carbon Asia Research Network (LoCARNet) | Open Energy...

    Open Energy Info (EERE)

    Energy, Land Focus Area Agriculture, Biomass, Buildings, Economic Development, Energy Efficiency, Forestry, Geothermal, Greenhouse Gas, Hydrogen, Industry, Land Use, People and...

  10. Vietnam-Low Carbon Asia Research Network (LoCARNet) | Open Energy...

    Open Energy Info (EERE)

    Energy, Land Focus Area Agriculture, Biomass, Buildings, Economic Development, Energy Efficiency, Forestry, Geothermal, Greenhouse Gas, Hydrogen, Industry, Land Use, People and...

  11. Malaysia-Low Carbon Asia Research Network (LoCARNet) | Open Energy...

    Open Energy Info (EERE)

    Energy, Land Focus Area Agriculture, Biomass, Buildings, Economic Development, Energy Efficiency, Forestry, Geothermal, Greenhouse Gas, Hydrogen, Industry, Land Use, People and...

  12. India-Low Carbon Asia Research Network (LoCARNet) | Open Energy...

    Open Energy Info (EERE)

    Energy, Land Focus Area Agriculture, Biomass, Buildings, Economic Development, Energy Efficiency, Forestry, Geothermal, Greenhouse Gas, Hydrogen, Industry, Land Use, People and...

  13. Japan-Low Carbon Asia Research Network (LoCARNet) | Open Energy...

    Open Energy Info (EERE)

    Energy, Land Focus Area Agriculture, Biomass, Buildings, Economic Development, Energy Efficiency, Forestry, Geothermal, Greenhouse Gas, Hydrogen, Industry, Land Use, People and...

  14. China-Low Carbon Asia Research Network (LoCARNet) | Open Energy...

    Open Energy Info (EERE)

    Energy, Land Focus Area Agriculture, Biomass, Buildings, Economic Development, Energy Efficiency, Forestry, Geothermal, Greenhouse Gas, Hydrogen, Industry, Land Use, People and...

  15. Laos-Low Carbon Asia Research Network (LoCARNet) | Open Energy...

    Open Energy Info (EERE)

    Energy, Land Focus Area Agriculture, Biomass, Buildings, Economic Development, Energy Efficiency, Forestry, Geothermal, Greenhouse Gas, Hydrogen, Industry, Land Use, People and...

  16. Indonesia-Low Carbon Asia Research Network (LoCARNet) | Open...

    Open Energy Info (EERE)

    Energy, Land Focus Area Agriculture, Biomass, Buildings, Economic Development, Energy Efficiency, Forestry, Geothermal, Greenhouse Gas, Hydrogen, Industry, Land Use, People and...

  17. Philippines-Low Carbon Asia Research Network (LoCARNet) | Open...

    Open Energy Info (EERE)

    Energy, Land Focus Area Agriculture, Biomass, Buildings, Economic Development, Energy Efficiency, Forestry, Geothermal, Greenhouse Gas, Hydrogen, Industry, Land Use, People and...

  18. Thailand-Low Carbon Asia Research Network (LoCARNet) | Open Energy...

    Open Energy Info (EERE)

    Energy, Land Focus Area Agriculture, Biomass, Buildings, Economic Development, Energy Efficiency, Forestry, Geothermal, Greenhouse Gas, Hydrogen, Industry, Land Use, People and...

  19. Democratic Republic of Congo-ClimateWorks Low Carbon Growth Planning...

    Open Energy Info (EERE)

    Organization ClimateWorks, Project Catalyst, McKinsey and Company Sector Energy, Land Focus Area Forestry, Greenhouse Gas Topics Background analysis, Low emission...

  20. Papua New Guinea-ClimateWorks Low Carbon Growth Planning Support...

    Open Energy Info (EERE)

    Organization ClimateWorks, Project Catalyst, McKinsey and Company Sector Energy, Land Topics Background analysis, Low emission development planning, Policiesdeployment...

  1. Energy Market and Economic Impacts of S.1766, the Low Carbon Economy Act of 2007

    Reports and Publications (EIA)

    2008-01-01

    This report responds to a request from Senators Bingaman and Specter for an analysis of a bill designed to cap greenhouse gas emissions at approximately 2006 levels in 2020, 1990 levels in 2030, and at least 60% below 1990 levels by 2050.

  2. Benchmarking and Energy Saving Tool for Low Carbon Cities (BEST Cities)

    Energy Science and Technology Software Center (OSTI)

    2014-02-01

    BEST-Cities is designed to provide city authorities with strategies they can follow to reduce city-wide carbon dioxide (CO2) and methane (CH4) emissions. The tool quickly assesses local energy use and energy-related CO2 emissions across nine sectors (i.e., industry, public and commercial buildings, residential buildings, transportation, power and heat, street lighting, water & wastewater, solid waste, and urban green space), giving officials a comprehensive perspective on their local carbon performance. Cities can also use the toolmore » to benchmark their energy and emissions performance to other cities inside and outside China, and identify those sectors with the greatest energy saving and emissions reduction potential.« less

  3. Low Carbon Green Growth Roadmap for Asia and the Pacific | Open...

    Open Energy Info (EERE)

    Green Growth Roadmap for Asia and the Pacific AgencyCompany Organization: Economic and Social Commission for Asia and the Pacific (ESCAP), Korea International Cooperation Agency...

  4. CfRN-Developing a Low Carbon Growth Plan | Open Energy Information

    Open Energy Info (EERE)

    Topics: GHG inventory, Low emission development planning Resource Type: Guidemanual, Lessons learnedbest practices, Publications Website: www.rainforestcoalition.org CfRN Low...

  5. Linking Transformational Materials and Processing for an Energy-Efficient and Low-Carbon Economy, 2010

    SciTech Connect (OSTI)

    Hunt, Warren H.; Brindle, Ross; James, Mallory; Justiniano, Mauricio; Sabouni, Ridah; Seader, Melanie; Ruch, Jennifer; Andres, Howard; Zafar, Muhammad

    2010-06-01

    The Energy Materials Blue Ribbon Panel, representing experts from industry, academia, and government, identifies new materials and processing breakthroughs that could lead to transformational advances in energy efficiency, energy security, and carbon reduction.

  6. Property:NumberOfLowCarbonPlanningPrograms | Open Energy Information

    Open Energy Info (EERE)

    25) A Afghanistan + 0 + Albania + 1 + Algeria + 1 + American Samoa + 0 + Andorra + 0 + Angola + 1 + Anguilla + 0 + Antigua and Barbuda + 2 + Argentina + 5 + Armenia + 2 + Aruba + 0...

  7. Freight Transportation Modal Shares: Scenarios for a Low-Carbon Future

    Broader source: Energy.gov [DOE]

    Freight transportation modes—truck, rail, water, air, and pipeline—each serve a distinct share of the freight transportation market. A variety of factors influence the modes chosen by shippers, carriers, and others involved in freight supply chains. Analytical methods can be used to project future modal shares, and federal policy actions could influence future freight mode choices. This report considers how these topics have been addressed in existing literature and offers insights on federal policy decisions with the potential to prompt mode choices that reduce energy use and greenhouse gas emissions.

  8. Freight Transportation Demand: Energy-Efficient Scenarios for a Low-Carbon Future

    Broader source: Energy.gov [DOE]

    Freight transportation demand is projected to grow to 27.5 billion tons in 2040, and by extrapolation, to nearly 30.2 billion tons in 2050, requiring ever-greater amounts of energy. This report describes the current and future demand for freight transportation in terms of tons and ton-miles of commodities moved by truck, rail, water, pipeline, and air freight carriers. It outlines the economic, logistics, transportation, and policy and regulatory factors that shape freight demand; the possible trends and 2050 outlook for these factors, and their anticipated effect on freight demand and related energy use.After describing federal policy actions that could influence freight demand, the report then summarizes the available analytical models for forecasting freight demand, and identifies possible areas for future action.

  9. Guatemala-Low-Carbon Energy for Central America: Building a Regional...

    Open Energy Info (EERE)

    AgencyCompany Organization World Watch Institute Sector Energy Focus Area Renewable Energy Topics Background analysis, Implementation, Low emission development planning,...

  10. Costa Rica-Low-Carbon Energy for Central America: Building a...

    Open Energy Info (EERE)

    AgencyCompany Organization World Watch Institute Sector Energy Focus Area Renewable Energy Topics Background analysis, Implementation, Low emission development planning,...

  11. Panama-Low-Carbon Energy for Central America: Building a Regional...

    Open Energy Info (EERE)

    AgencyCompany Organization World Watch Institute Sector Energy Focus Area Renewable Energy Topics Background analysis, Implementation, Low emission development planning,...

  12. Nicaragua-Low-Carbon Energy for Central America: Building a Regional...

    Open Energy Info (EERE)

    AgencyCompany Organization World Watch Institute Sector Energy Focus Area Renewable Energy Topics Background analysis, Implementation, Low emission development planning,...

  13. El Salvador-Low-Carbon Energy for Central America: Building a...

    Open Energy Info (EERE)

    AgencyCompany Organization World Watch Institute Sector Energy Focus Area Renewable Energy Topics Background analysis, Implementation, Low emission development planning, -LEDS,...

  14. Honduras-Low-Carbon Energy for Central America: Building a Regional...

    Open Energy Info (EERE)

    AgencyCompany Organization World Watch Institute Sector Energy Focus Area Renewable Energy Topics Background analysis, Implementation, Low emission development planning,...

  15. Suburbs offset Low Carbon Footprint of major U.S. Cities | OpenEI...

    Open Energy Info (EERE)

    average, while suburban dwellers are about twice the national average. You can access the full report in Environmental Science & Technology Login to post comments Graham7781's blog...

  16. UNDP-Charting a New Low-Carbon Route to Development | Open Energy...

    Open Energy Info (EERE)

    (ITCP), from setting objectives and participatory arrangements for the preparation of the Plan, to financing priority activities. The main audience for this publication is the...

  17. Low Carbon Grid Study: Analysis of a 50% Emission Reduction in...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... options tend to increase cycling at California gas generators; storage and demand response can help reduce emissions and curtailment while reducing cycling. * Imports from ...

  18. Strategies for Low Carbon Growth In India: Industry and Non Residential Sectors

    SciTech Connect (OSTI)

    Sathaye, Jayant; de la Rue du Can, Stephane; Iyer, Maithili; McNeil, Michael; Kramer, Klaas Jan; Roy, Joyashree; Roy, Moumita; Chowdhury, Shreya Roy

    2011-04-15

    This report analyzed the potential for increasing energy efficiency and reducing greenhouse gas emissions (GHGs) in the non-residential building and the industrial sectors in India. The first two sections describe the research and analysis supporting the establishment of baseline energy consumption using a bottom up approach for the non residential sector and for the industry sector respectively. The third section covers the explanation of a modeling framework where GHG emissions are projected according to a baseline scenario and alternative scenarios that account for the implementation of cleaner technology.

  19. Interface Exchange as an Indicator for Eddy Heat Transport

    SciTech Connect (OSTI)

    Petersen, Mark R.; Williams, Sean J.; Hecht, Matthew W.; Maltrud, Mathew E.; Hamann, Bernd; Patchett, John M.; Ahrens, James P.

    2012-06-12

    The ocean contains many large-scale, long-lived vortices, called mesoscale eddies, that are believed to have a role in the transport and redistribution of salt, heat, and nutrients throughout the ocean. Determining this role, however, has proven to be a challenge, since the mechanics of eddies are only partly understood; a standard definition for these ocean eddies does not exist and, therefore, scientifically meaningful, robust methods for eddy extraction, characterization, tracking and visualization remain a challenge. In order to shed light on the nature and potential roles of eddies, we have combined our previous research on eddy identification and tracking, and have used those approaches as the basis for analysis-driven computational experiments on the nature of eddies. Based on the resulting visualizations of eddy behavior, we have devised a new metric to characterize the transfer of water into and out of eddies across their boundary, and have developed visualization methods for this new metric to provide clues about the role eddies play in the global ocean and, potentially, climate change.

  20. Building waste management core indicators through Spatial Material Flow Analysis: Net recovery and transport intensity indexes

    SciTech Connect (OSTI)

    Font Vivanco, David; Puig Ventosa, Ignasi; Gabarrell Durany, Xavier

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Sustainability and proximity principles have a key role in waste management. Black-Right-Pointing-Pointer Core indicators are needed in order to quantify and evaluate them. Black-Right-Pointing-Pointer A systematic, step-by-step approach is developed in this study for their development. Black-Right-Pointing-Pointer Transport may play a significant role in terms of environmental and economic costs. Black-Right-Pointing-Pointer Policy action is required in order to advance in the consecution of these principles. - Abstract: In this paper, the material and spatial characterization of the flows within a municipal solid waste (MSW) management system are combined through a Network-Based Spatial Material Flow Analysis. Using this information, two core indicators are developed for the bio-waste fraction, the Net Recovery Index (NRI) and the Transport Intensity Index (TII), which are aimed at assessing progress towards policy-related sustainable MSW management strategies and objectives. The NRI approaches the capacity of a MSW management system for converting waste into resources through a systematic metabolic approach, whereas the TII addresses efficiency in terms of the transport requirements to manage a specific waste flow throughout the entire MSW management life cycle. Therefore, both indicators could be useful in assessing key MSW management policy strategies, such as the consecution of higher recycling levels (sustainability principle) or the minimization of transport by locating treatment facilities closer to generation sources (proximity principle). To apply this methodological approach, the bio-waste management system of the region of Catalonia (Spain) has been chosen as a case study. Results show the adequacy of both indicators for identifying those points within the system with higher capacity to compromise its environmental, economic and social performance and therefore establishing clear targets for policy prioritization. Moreover, this methodological approach permits scenario building, which could be useful in assessing the outcomes of hypothetical scenarios, thus proving its adequacy for strategic planning.

  1. A Comprehensive System of Energy Intensity Indicators for the U.S.: Methods, Data and Key Trends

    SciTech Connect (OSTI)

    Belzer, David B.

    2014-08-31

    This report describes a comprehensive system of energy intensity indicators for the United States that has been developed for the Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) over the past decade. This system of indicators is hierarchical in nature, beginning with detailed indexes of energy intensity for various sectors of the economy, which are ultimately aggregated to an overall energy intensity index for the economy as a whole. The aggregation of energy intensity indexes to higher levels in the hierarchy is performed with a version of the Log Mean Divisia Index (LMDI) method. Based upon the data and methods in the system of indicators, the economy-wide energy intensity index shows a decline of about 14% in 2010 relative to a 1985 base year. Discussion of energy intensity indicators for each of the broad end-use sectors of the economy—residential, commercial, industrial, and transportation—is presented in the report. An analysis of recent changes in the efficiency of electricity generation in the U.S. is also included. A detailed appendix describes the data sources and methodology behind the energy intensity indicators for each sector.

  2. 4Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from October to December 2006. Data for these indicators are gathered by Field...

  3. 1Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January to March 2007. Data for these indicators are gathered by Field elements...

  4. 4Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from October to December 2005. Data for these indicators are gathered by Field...

  5. 2Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2005. Data for these indicators are gathered by Field elements...

  6. 3Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from July to September 2005. Data for these indicators are gathered by Field...

  7. 1Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January to March 2005. Data for these indicators are gathered by Field elements...

  8. 3Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from July to September 2006. Data for these indicators are gathered by Field...

  9. 2Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2006. Data for these indicators are gathered by Field elements...

  10. 4Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators QuarterlyReport covering the period from October to December 2007. Data for these indicators aregathered by Field...

  11. 4Q CY2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from October to December 2008. Data for these indicators are gathered by Field...

  12. 2Q CY2012 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April through June 2012. Data for these indicators were...

  13. 1Q CY2001 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from January to March 2001. Data for these indicators are gathered by the Field...

  14. 1Q CY2012 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January through March 2012. Data for these indicators were...

  15. 4Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from October through December 2011. Data for these indicators were...

  16. 3Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from July to September 2007. Data for these indicators are gathered by Field...

  17. 3Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the Period July  through September 2011. Data for these indicators were gathered...

  18. 4Q CY2002 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative Program Performance Indicators (Pis) Quarterly Report Covering the Period from October to December 2002. Data for these indicators are gathered by Field...

  19. 2Q CY2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators QuarterlyReport covering the period from April to June 2008. Data for these indicators aregathered by Field elements...

  20. 1Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the Period January through March 2011. Data for these indicators were gathered...

  1. 3Q CY2001 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from July to September 2001. Data for these indicators are gathered by the Field...

  2. 2Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2007. Data for these indicators are gathered by field elements...

  3. "Table HC4.13 Lighting Usage Indicators by Renter-Occupied Housing...

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by Renter-Occupied Housing Unit Zone, 2005" " Million U.S. ... in Buildings With--" "Lighting Usage Indicators",,,"Detached","Attached...

  4. "Table HC11.13 Lighting Usage Indicators by Northeast Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by Northeast Census Region, 2005" " Million U.S. Housing ... Division" ,,"Total Northeast" "Lighting Usage Indicators",,,"Middle ...

  5. "Table HC12.13 Lighting Usage Indicators by Midwest Census Region...

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by Midwest Census Region, 2005" " Million U.S. Housing Units" ... ,,,"Census Division" ,,"Total Midwest" "Lighting Usage Indicators",,,"East North ...

  6. "Table HC3.13 Lighting Usage Indicators by Owner-Occupied Housing...

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by Owner-Occupied Housing Unit Zone, 2005" " Million U.S. ... in Buildings With--" "Lighting Usage Indicators",,,"Detached","Attached...

  7. "Table HC14.13 Lighting Usage Indicators by West Census Region...

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by West Census Region, 2005" " Million U.S. Housing Units" ... ,,,"Census Division" ,,"Total West" "Lighting Usage Indicators",,,"Mountain","Pacific" ...

  8. "Table HC13.13 Lighting Usage Indicators by South Census Region...

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by South Census Region, 2005" " Million U.S. Housing Units" ... ,,,"Census Division" ,,"Total South" "Lighting Usage Indicators",,,"South ...

  9. 3Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representative Program Indicators (Pis) Quarterly Report attached, covering the period from July to September 2000. Data for these indicators are gathered by the Field elements...

  10. 2Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period April through June 20 1 1. Data for these indicators were gathered...

  11. Cyber Security Indications and Warning System (SV): CRADA 1573.94 Project Accomplishments Summary

    SciTech Connect (OSTI)

    Hu, Tan Chang; Robinson, David G.

    2011-09-08

    As the national focus on cyber security increases, there is an evolving need for a capability to provide for high-speed sensing of events, correlation of events, and decision-making based on the adverse events seen across multiple independent large-scale network environments. The purpose of this Shared Vision project, Cyber Security Indications and Warning System, was to combine both Sandia's and LMC's expertise to discover new solutions to the challenge of protecting our nation's infrastructure assets. The objectives and scope of the proposal was limited to algorithm and High Performance Computing (HPC) model assessment in the unclassified environment within funding and schedule constraints. The interest is the identification, scalability assessment, and applicability of current utilized cyber security algorithms as applied in an HPC environment.

  12. Accurate atmospheric parameters at moderate resolution using spectral indices: Preliminary application to the marvels survey

    SciTech Connect (OSTI)

    Ghezzi, Luan; Da Costa, Luiz N.; Maia, Marcio A. G.; Ogando, Ricardo L. C.; Dutra-Ferreira, Letcia; Lorenzo-Oliveira, Diego; Porto de Mello, Gustavo F.; Santiago, Baslio X.; De Lee, Nathan; Lee, Brian L.; Ge, Jian; Wisniewski, John P.; Gonzlez Hernndez, Jonay I.; Stassun, Keivan G.; Cargile, Phillip; Pepper, Joshua; Fleming, Scott W.; Schneider, Donald P.; Mahadevan, Suvrath; Wang, Ji; and others

    2014-12-01

    Studies of Galactic chemical, and dynamical evolution in the solar neighborhood depend on the availability of precise atmospheric parameters (effective temperature T {sub eff}, metallicity [Fe/H], and surface gravity log g) for solar-type stars. Many large-scale spectroscopic surveys operate at low to moderate spectral resolution for efficiency in observing large samples, which makes the stellar characterization difficult due to the high degree of blending of spectral features. Therefore, most surveys employ spectral synthesis, which is a powerful technique, but relies heavily on the completeness and accuracy of atomic line databases and can yield possibly correlated atmospheric parameters. In this work, we use an alternative method based on spectral indices to determine the atmospheric parameters of a sample of nearby FGK dwarfs and subgiants observed by the MARVELS survey at moderate resolving power (R ? 12,000). To avoid a time-consuming manual analysis, we have developed three codes to automatically normalize the observed spectra, measure the equivalent widths of the indices, and, through a comparison of those with values calculated with predetermined calibrations, estimate the atmospheric parameters of the stars. The calibrations were derived using a sample of 309 stars with precise stellar parameters obtained from the analysis of high-resolution FEROS spectra, permitting the low-resolution equivalent widths to be directly related to the stellar parameters. A validation test of the method was conducted with a sample of 30 MARVELS targets that also have reliable atmospheric parameters derived from the high-resolution spectra and spectroscopic analysis based on the excitation and ionization equilibria method. Our approach was able to recover the parameters within 80 K for T {sub eff}, 0.05 dex for [Fe/H], and 0.15 dex for log g, values that are lower than or equal to the typical external uncertainties found between different high-resolution analyses. An additional test was performed with a subsample of 138 stars from the ELODIE stellar library, and the literature atmospheric parameters were recovered within 125 K for T {sub eff}, 0.10 dex for [Fe/H], and 0.29 dex for log g. These precisions are consistent with or better than those provided by the pipelines of surveys operating with similar resolutions. These results show that the spectral indices are a competitive tool to characterize stars with intermediate resolution spectra.

  13. The development and evaluation of programmatic performance indicators associated with maintenance at nuclear power plants

    SciTech Connect (OSTI)

    Wreathall, J.; Fragola, J.; Appignani, P.; Burlile, G.; Shen, Y. )

    1990-05-01

    This report summarizes the development and evaluation of programmatic performance indicators of maintenance. These indicators were selected by: (1) creating a formal framework of plant processes; (2) identifying features of plant behavior considered important to safety; (3) evaluating existing indicators against these features; and (4) performing statistical analyses for the selected indicators. The report recommends additional testing. 32 refs., 29 figs., 11 tabs.

  14. The effects of digital elevation model resolution on the calculation and predictions of topographic wetness indices.

    SciTech Connect (OSTI)

    Drover, Damion, Ryan

    2011-12-01

    One of the largest exports in the Southeast U.S. is forest products. Interest in biofuels using forest biomass has increased recently, leading to more research into better forest management BMPs. The USDA Forest Service, along with the Oak Ridge National Laboratory, University of Georgia and Oregon State University are researching the impacts of intensive forest management for biofuels on water quality and quantity at the Savannah River Site in South Carolina. Surface runoff of saturated areas, transporting excess nutrients and contaminants, is a potential water quality issue under investigation. Detailed maps of variable source areas and soil characteristics would therefore be helpful prior to treatment. The availability of remotely sensed and computed digital elevation models (DEMs) and spatial analysis tools make it easy to calculate terrain attributes. These terrain attributes can be used in models to predict saturated areas or other attributes in the landscape. With laser altimetry, an area can be flown to produce very high resolution data, and the resulting data can be resampled into any resolution of DEM desired. Additionally, there exist many maps that are in various resolutions of DEM, such as those acquired from the U.S. Geological Survey. Problems arise when using maps derived from different resolution DEMs. For example, saturated areas can be under or overestimated depending on the resolution used. The purpose of this study was to examine the effects of DEM resolution on the calculation of topographic wetness indices used to predict variable source areas of saturation, and to find the best resolutions to produce prediction maps of soil attributes like nitrogen, carbon, bulk density and soil texture for low-relief, humid-temperate forested hillslopes. Topographic wetness indices were calculated based on the derived terrain attributes, slope and specific catchment area, from five different DEM resolutions. The DEMs were resampled from LiDAR, which is a laser altimetry remote sensing method, obtained from the USDA Forest Service at Savannah River Site. The specific DEM resolutions were chosen because they are common grid cell sizes (10m, 30m, and 50m) used in mapping for management applications and in research. The finer resolutions (2m and 5m) were chosen for the purpose of determining how finer resolutions performed compared with coarser resolutions at predicting wetness and related soil attributes. The wetness indices were compared across DEMs and with each other in terms of quantile and distribution differences, then in terms of how well they each correlated with measured soil attributes. Spatial and non-spatial analyses were performed, and predictions using regression and geostatistics were examined for efficacy relative to each DEM resolution. Trends in the raw data and analysis results were also revealed.

  15. 3Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from July to September  2003. Data for these indicators are gathered by Field...

  16. 4Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report Covering the Period from October to December  2004. Data for these indicators are gathered by Field...

  17. 2Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report Covering the Period from April to June  2004. Data for these indicators are gathered by Field elements...

  18. 4Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from October to December  2003. Data for these indicators are gathered by Field...

  19. 3Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report Covering the Period from July to September  2004. Data for these indicators are gathered by Field...

  20. 1Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January  to March 2006. Data for these indicators are gathered by Field...

  1. EIA Energy Efficiency-Table 5f. Economic Indicators a for the...

    Gasoline and Diesel Fuel Update (EIA)

    f Page Last Modified: May 2010 Table 5f. Economic Indicators 1 for the Metalcasting Industry (NAICS 3315), 1998, 2002, and 2006 MECS Survey Years Indicators 1998 2002 2006 Nominal...

  2. 1Q CY2002 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from January  to March  2002. Data for these indicators are gathered by the Field...

  3. Energy Price Indices and Discount Factors for Life-Cycle Cost...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Price Indices and Discount Factors for Life-Cycle Cost Analysis - 2015 Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - 2015 Handbook describes the annual...

  4. 3Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from July to September 2009. Data for these indicators are gathered by Field...

  5. 4Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from October to December 2009. Data for these indicators are gathered by Field...

  6. 1Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from January to March 2009. Data for these indicators are gathered by Field...

  7. 1Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from January to March2010. Data for these indicators are gathered by Field...

  8. 2Q CY2002 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from April  to June 2002. Data for these indicators are gathered by the Field...

  9. 4Q CY2001 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from October to December  2001. Data for these indicators are gathered by the Field...

  10. 2Q CY2001 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from April to June 2001. Data for these indicators are gathered by the Field elements...

  11. 3Q CY2002 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from July  to September  2002. Data for these indicators are gathered by the Field...

  12. 1Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from January to March  2003. Data for these indicators are gathered by Field...

  13. 2Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "The Facility Representative Program Performance Indicators (PIs) Quarterly Report is attached, covering the period from April 2000 to June 2000. Data for these indicators are gathered by the Field...

  14. 2Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from April to June  2009. Data for these indicators are gathered by Field elements...

  15. "Table HC10.13 Lighting Usage Indicators by U.S. Census Region...

    U.S. Energy Information Administration (EIA) Indexed Site

    Lighting Usage Indicators by U.S. Census Region, 2005" " Million U.S. Housing Units" ,"Housing Units (millions)","U.S. Census Region" "Lighting Usage Indicators",,"Northeast","Midw...

  16. 2Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from April to June  2003. Data for these indicators are gathered by Field elements...

  17. 3Q C&2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from July to September   2008. Data for these indicators aregathered by Field...

  18. Insertion of operation-and-indicate instructions for optimized SIMD code

    Office of Scientific and Technical Information (OSTI)

    (Patent) | SciTech Connect Insertion of operation-and-indicate instructions for optimized SIMD code Citation Details In-Document Search Title: Insertion of operation-and-indicate instructions for optimized SIMD code Mechanisms are provided for inserting indicated instructions for tracking and indicating exceptions in the execution of vectorized code. A portion of first code is received for compilation. The portion of first code is analyzed to identify non-speculative instructions performing

  19. EPICS BASE

    Energy Science and Technology Software Center (OSTI)

    002230MLTPL00 Experimental Physics and Industrial Control System BASE http://www.aps.anl.gov/epics

  20. Pb Isotopes as an Indicator of the Asian Contribution to Particulate Air Pollution in Urban California

    SciTech Connect (OSTI)

    Ewing, Stephanie A.; Christensen, John N.; Brown, Shaun T.; Vancuren, Richard A.; Cliff, Steven S.; DePaolo, Donald J.

    2010-10-25

    During the last two decades, expanding industrial activity in east Asia has led to increased production of airborne pollutants that can be transported to North America. Previous efforts to detect this trans-Pacific pollution have relied upon remote sensing and remote sample locations. We tested whether Pb isotope ratios in airborne particles can be used to directly evaluate the Asian contribution to airborne particles of anthropogenic origin in western North America, using a time series of samples from a pair of sites upwind and downwind of the San Francisco Bay Area. Our results for airborne Pb at these sites indicate a median value of 29 Asian origin, based on mixing relations between distinct regional sample groups. This trans-Pacific Pb is present in small quantities but serves as a tracer for airborne particles within the growing Asian industrial plume. We then applied this analysis to archived samples from urban sites in central California. Taken together, our results suggest that the analysis of Pb isotopes can reveal the distribution of airborne particles affected by Asian industrial pollution at urban sites in northern California. Under suitable circumstances, this analysis can improve understanding of the global transport of pollution, independent of transport models.

  1. EIA Energy Efficiency-Table 5c. Economic and Physical Indicators...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Energy Efficiency > Manufacturing Trend Data, 1998, 2002, and 2006 > Table 5c Page Last Modified: May 2010 Table 5c. Economic and Physical Indicators for the Aluminum Industry...

  2. EIA Energy Efficiency-Table 5a. Economic and Physical Indicators...

    Gasoline and Diesel Fuel Update (EIA)

    BEA's chain-type price indices for value added for primary metal (NAICS 331). Sources: Energy Information Administration, Manufacturing Energy Consumption Surveys 1998, 2002, and...

  3. EIA Energy Efficiency-Table 5d. Economic and Physical Indicators...

    Gasoline and Diesel Fuel Update (EIA)

    Energy Efficiency > Manufacturing Trend Data, 1998, 2002, and 2006 > Table 5d Page Last Modified: May 2010 Table 5d. Economic and Physical Indicators for Basic Chemicals (NAICS...

  4. 4Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "This memorandum summarizes the highlights of the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period October through December 2010. Data for these...

  5. 3Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    This memorandum summarizes the highlights of the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period of July through September 2010. Data for these...

  6. 2Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    This memorandum summarizes the highlight of, and announces the availablity on-line of, the Facility Representative (FR) Program Performance Indicators are gathered by Field elements quarterly per...

  7. "Table HC15.13 Lighting Usage Indicators by Four Most Populated...

    U.S. Energy Information Administration (EIA) Indexed Site

    Lighting Usage Indicators by Four Most Populated States, 2005" " Million U.S. Housing Units" ,"Housing Units (millions)","Four Most Populated States" "Lighting Usage ...

  8. Electric-drive tractability indicator integrated in hybrid electric vehicle tachometer

    DOE Patents [OSTI]

    Tamai, Goro; Zhou, Jing; Weslati, Feisel

    2014-09-02

    An indicator, system and method of indicating electric drive usability in a hybrid electric vehicle. A tachometer is used that includes a display having an all-electric drive portion and a hybrid drive portion. The all-electric drive portion and the hybrid drive portion share a first boundary which indicates a minimum electric drive usability and a beginning of hybrid drive operation of the vehicle. The indicated level of electric drive usability is derived from at least one of a percent battery discharge, a percent maximum torque provided by the electric drive, and a percent electric drive to hybrid drive operating cost for the hybrid electric vehicle.

  9. Intra- and Interfractional Variations for Prone Breast Irradiation: An Indication for Image-Guided Radiotherapy

    SciTech Connect (OSTI)

    Morrow, Natalya V.; Stepaniak, Christopher; White, Julia; Wilson, J. Frank [Department of Radiation Oncology, Medical College of Wisconsin, Milwaukee, WI (United States); Li, X. Allen [Department of Radiation Oncology, Medical College of Wisconsin, Milwaukee, WI (United States)], E-mail: ali@radonc.mcw.edu

    2007-11-01

    Purpose: Intra- and interfractional errors for breast cancer patients undergoing breast irradiation in the prone position were analyzed. Methods and Materials: To assess intrafractional error resulting from respiratory motion, four-dimensional computed tomography scans were acquired for 3 prone and 3 supine patients, and the respiratory motion was compared for the two positions. To assess the interfractional error caused by daily set-up variations, daily electronic portal images of one of the treatment beams were taken for 15 prone-positioned patients. Portal images were then overlaid with images from the planning system that included the breast contour and the isocenter, treatment beam portal, and isocenter. The shift between the planned and actual isocenter was recorded for each portal image, and descriptive statistics were collected for each patient. The margins were calculated using the 2{sigma}+0.7{sigma} recipe, as well as 95% confidence interval based on the pooled standard deviation of the datasets. Results: Respiratory motion of the chest wall is drastically reduced from 2.3 {+-} 0.9 mm in supine position to -0.1 {+-} 0.4 mm in prone position. The daily set-up errors vary in magnitude from 0.0 cm to 1.65 cm and are patient dependent. The margins were defined by considering only the standard deviation to be 1.1 cm, and 2.0 cm when the systematic errors were considered using the 2{sigma}+0.7{sigma} recipe. Conclusions: Prone positioning of patients for breast irradiation significantly reduces the uncertainty introduced by intrafractional respiratory motion. The presence of large systematic error in the interfractional variations necessitates a large clinical target volume-to-planning target volume margin and indicates the importance of image guidance for partial breast irradiation in the prone position, particularly using imaging modality capable of identifying the lumpectomy cavity.

  10. Energy Saving Melting and Revert Reduction Technology (Energy-SMARRT): Surface/Near Surface Indication - Characterization of Surface Anomalies from Magnetic Particle and Liquid Penetrant Indications

    SciTech Connect (OSTI)

    Griffin, John

    2014-02-20

    The systematic study and characterization of surface indications has never been conducted. Producers and users of castings do not have any data on which they can reliably communicate the nature of these indications or their effect on the performance of parts. Clearly, the ultimate intent of any work in this area is to eliminate indications that do in fact degrade properties. However, it may be impractical physically and/or financially to eliminate all surface imperfections. This project focused on the ones that actually degrade properties. The initial work was to identify those that degrade properties. Accurate numerical simulations of casting service performance allow designers to use the geometric flexibility of castings and the superior properties of steel to produce lighter weight and more energy efficient components for transportation systems (cars and trucks), construction, and mining. Accurate simulations increase the net melting energy efficiency by improving casting yield and reducing rework and scrap. Conservatively assuming a 10% improvement in yield, approximately 1.33 x 1012 BTU/year can be saved with this technology. In addition, CO2 emissions will be reduced by approximately 117,050 tons per year.

  11. Mitigation Action Implementation Network (MAIN) | Open Energy...

    Open Energy Info (EERE)

    of Nationally Appropriate Mitigation Actions (NAMAs) and Low-Carbon Development (LCD) strategies in developing countries through regionally based dialogues, web-based...

  12. Selecting indicators of soil, microbial, and plant conditions to understand ecological changes in Georgia pine forests

    SciTech Connect (OSTI)

    Dale, Virginia H; Garten Jr, Charles T; Wolfe, Amy K; Sobek, Edward A

    2008-11-01

    Characterizing how resource use and management activities affect ecological conditions is necessary to document and understand anthropogenic changes in ecological systems. Resource managers on military installations have the delicate task of balancing the training needs of soldiers effectively with the need to maintain a high quality of ecological conditions. This study considers ways that ecological indicators can provide information on impacts that training has on environmental characteristics that occur at different scales and in different sectors of the environment. The characteristics examined include soil chemistry, soil microbes, and vegetation. A discriminant function analysis was conducted to determine whether ecological indicators could differentiate among different levels of military use. A combination of 10 indicators explained 90% of the variation among plots from five different military use levels. Results indicated that an appropriate suite of ecological indicators for military resource managers includes soil, microbial, and vegetation characteristics. Since many of these indicators are related, managers at this location potentially have freedom to choose indicators that are relatively easy to measure, without sacrificing information.

  13. EIA Energy Efficiency-Table 5b. Economic and Physical Indicators...

    Gasoline and Diesel Fuel Update (EIA)

    outputs. 3. Deflated using BEA's chain-type price indices for value added. Sources: Energy Information Administration, Annual Energy Review 2004. (DOEEIA-0384(2004) Table 5.8...

  14. EIA Energy Efficiency-Table 5a. Economic and Physical Indicators...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    a Page Last Modified: May 2010 Table 5a. Economic and Physical Indicators for the Forest Products Industry, 1998, 2002, and 2006 (NAICS 321 and NAICS 322) MECS Survey Years...

  15. Arc voltage distribution skewness as an indicator of electrode gap during vacuum arc remelting

    DOE Patents [OSTI]

    Williamson, Rodney L. (Albuquerque, NM); Zanner, Frank J. (Sandia Park, NM); Grose, Stephen M. (Glenwood, WV)

    1998-01-01

    The electrode gap of a VAR is monitored by determining the skewness of a distribution of gap voltage measurements. A decrease in skewness indicates an increase in gap and may be used to control the gap.

  16. Arc voltage distribution skewness as an indicator of electrode gap during vacuum arc remelting

    DOE Patents [OSTI]

    Williamson, R.L.; Zanner, F.J.; Grose, S.M.

    1998-01-13

    The electrode gap of a VAR is monitored by determining the skewness of a distribution of gap voltage measurements. A decrease in skewness indicates an increase in gap and may be used to control the gap. 4 figs.

  17. Electricity Use as an Indicator of U.S. Economic Activity

    U.S. Energy Information Administration (EIA) Indexed Site

    Electricity Use as an Indicator of U.S. Economic Activity ... www.eia.gov U.S. Energy Information Administration ... weekly, possibly hourly by 2015. JEL Code: E32, E37, Q43 ...

  18. Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2015 | Department of Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - 2015 Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - 2015 Handbook describes the annual supplements to the NIST Handbook 135 and NBS Special Publication 709. PDF icon ashb15.pdf More Documents & Publications Guidance on Life-Cycle Cost Analysis Required by Executive Order 13123 Vehicle Technologies Office Merit Review 2015: Fuel-Neutral Studies of Particulate Matter

  19. Short-Term Energy Outlook Supplement: Energy-weighted industrial production indices

    Gasoline and Diesel Fuel Update (EIA)

    Energy-weighted industrial production indices December 2013 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | Short-Term Energy Outlook Supplement: Energy-weighted industrial production indices i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of

  20. MID-INFRARED SPECTRAL INDICATORS OF STAR FORMATION AND ACTIVE GALACTIC

    Office of Scientific and Technical Information (OSTI)

    NUCLEUS ACTIVITY IN NORMAL GALAXIES (Journal Article) | SciTech Connect MID-INFRARED SPECTRAL INDICATORS OF STAR FORMATION AND ACTIVE GALACTIC NUCLEUS ACTIVITY IN NORMAL GALAXIES Citation Details In-Document Search Title: MID-INFRARED SPECTRAL INDICATORS OF STAR FORMATION AND ACTIVE GALACTIC NUCLEUS ACTIVITY IN NORMAL GALAXIES We investigate the use of mid-infrared (MIR) polycyclic aromatic hydrocarbon (PAH) bands, the continuum, and emission lines as probes of star formation (SF) and active

  1. Transportation Energy Futures Series: Freight Transportation Demand: Energy-Efficient Scenarios for a Low-Carbon Future

    SciTech Connect (OSTI)

    Grenzeback, L. R.; Brown, A.; Fischer, M. J.; Hutson, N.; Lamm, C. R.; Pei, Y. L.; Vimmerstedt, L.; Vyas, A. D.; Winebrake, J. J.

    2013-03-01

    Freight transportation demand is projected to grow to 27.5 billion tons in 2040, and to nearly 30.2 billion tons in 2050. This report describes the current and future demand for freight transportation in terms of tons and ton-miles of commodities moved by truck, rail, water, pipeline, and air freight carriers. It outlines the economic, logistics, transportation, and policy and regulatory factors that shape freight demand, the trends and 2050 outlook for these factors, and their anticipated effect on freight demand. After describing federal policy actions that could influence future freight demand, the report then summarizes the capabilities of available analytical models for forecasting freight demand. This is one in a series of reports produced as a result of the Transportation Energy Futures project, a Department of Energy-sponsored multi-agency effort to pinpoint underexplored strategies for reducing GHGs and petroleum dependence related to transportation.

  2. Methods for indication of at least one subsurface barrier characteristic and methods of use

    DOE Patents [OSTI]

    Richardson, John G. (Idaho Falls, ID); Nickelson, Reva A. (Shelley, ID); Sloan, Paul A. (Rigby, ID); Kostelnik, Kevin M. (Idaho Falls, ID)

    2007-06-26

    A containment system for use adjacent to a selected region of a subterranean formation and comprising a plurality of laterally interlocked casing strings. At least one electrically conductive element is disposed along at least a portion of a casing string and is used for performing electrical time domain reflectometry. At least one protective element may be positioned between portions of adjacent casing strings of the barrier, and at least one electrically conductive element may be disposed at least partially within the at least one protective element for use in indicating at least one characteristic of at least a portion of the containment system. Electrical time domain reflectometry (TDR) may be used to indicate the at least one characteristic; for instance, TDR may be used to indicate leakage through the barrier or a discontinuity or void in a barrier filler material.

  3. Relations between health indicators and residential proximity to coal mining in West Virginia

    SciTech Connect (OSTI)

    Hendryx, M.; Ahern, M.M.

    2008-04-15

    We used data from a survey of 16493 West Virginians merged with county-level coal production and other covariates to investigate the relations between health indicators and residential proximity to coal mining. Results of hierarchical analyses indicated that high levels of coal production were associated with worse adjusted health status and with higher rates of cardiopulmonary disease, chronic obstructive pulmonary disease, hypertension, lung disease, and kidney disease. Research is recommended to ascertain the mechanisms, magnitude, and consequences of a community coal-mining exposure effect.

  4. Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NISTIR 85-3273-30 Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - 2015 Annual Supplement to NIST Handbook 135 Priya D. Lavappa Joshua D. Kneifel This publication is available free of charge from: http://dx.doi.org/10.6028/NIST.IR.85-3273-30 U.S. DEPARTMENT OF COMMERCE Technology Administration National Institute of Standards and Technology Prepared for United States Department of Energy Federal Energy Management Program April 2005 NISTIR 85-3273-30 Energy Price Indices

  5. Updating of Safety Criteria for Basic Diagnostic Indicators of Dam at the Sayano-Shushenskaya HPP

    SciTech Connect (OSTI)

    Gordon, L. A.; Skvortsova, A. E.

    2013-09-15

    Values of diagnostic indicators [K]-limitations placed on radial displacements and turn angles of horizontal sections of the dam - which are permitted for each upper-pool level within the range from 520 to 539 m are determined and proposed for inclusion in the Declaration of Safety. Empirical relationships used to develop safety criteria K1 and K2 are modified.

  6. Table HC15.10 Home Appliances Usage Indicators by Four Most Populated States, 2005

    Gasoline and Diesel Fuel Update (EIA)

    0 Home Appliances Usage Indicators by Four Most Populated States, 2005 Total.................................................................................... 111.1 7.1 7.0 8.0 12.1 Cooking Appliances Frequency of Hot Meals Cooked 3 or More Times A Day................................................. 8.2 0.6 0.5 0.8 1.4 2 Times A Day.............................................................. 24.6 1.4 1.5 2.0 3.1 Once a Day...................................................................

  7. Table 2.10 Commercial Buildings Energy Consumption and Expenditure Indicators, Selected Years, 1979-2003

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Commercial Buildings Energy Consumption and Expenditure Indicators, Selected Years, 1979-2003 Energy Source and Year Building Characteristics Energy Consumption Energy Expenditures Number of Buildings Total Square Feet Square Feet per Building Total Per Building Per Square Foot Per Employee Total Per Building Per Square Foot Per Million Btu Thousands Millions Thousands Trillion Btu Million Btu Thousand Btu Million Btu Million Dollars 1 Thousand Dollars 1 Dollars 1 Dollars 1 Major Sources 2

  8. JISEA News: Study on Methane Emissions from Natural Gas Systems Indicates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Priorities - News Releases | NREL JISEA News: Study on Methane Emissions from Natural Gas Systems Indicates New Priorities Study findings published in Policy Forum of Journal Science February 18, 2014 A new study published in the journal Science says that the total impact of switching to natural gas depends heavily on leakage of methane (CH4) during the natural gas life cycle, and suggests that more can be done to reduce methane emissions and to improve measurement tools which help

  9. ENHANCED SAFEGUARDS: THE ROLE OF SMART FUNCTIONAL COATINGS FOR TAMPER INDICATION

    SciTech Connect (OSTI)

    Mendez-Torres, A.; Martinez-Rodriguez, M.; Brinkman, K.; Krementz, D.

    2012-02-24

    This work investigates the synthesis of smart functional coatings (SFC) using chemical solution deposition methods. Chemical solution deposition methods have recently received attention in the materials research community due to several unique advantages that include low temperature processing, high homogeneity of final products, the ability to fabricate materials with controlled surface properties and pore structures, and the ease of dopant incorporation in controlled concentrations. The optical properties of thin films were investigated using UV-Vis spectroscopy, Raman, SEM and EDS, with the aim of developing a protective transparent coating for a ceramic surface as a first line of defense for tamper indication. The signature produced by the addition of rare earth dopants will be employed as an additional tamper indicating feature. The integration of SFC's as part of a broader verification system such as an electronic seals can provide additional functionality and defense in depth. SFC's can improve the timeliness of detection by providing a robust, in-situ verifiable tamper indication framework.

  10. Supporting 64-bit global indices in Epetra and other Trilinos packages : techniques used and lessons learned.

    SciTech Connect (OSTI)

    Jhurani, Chetan; Austin, Travis M.; Heroux, Michael Allen; Willenbring, James Michael

    2013-06-01

    The Trilinos Project is an effort to facilitate the design, development, integration and ongoing support of mathematical software libraries within an object-oriented framework. It is intended for large-scale, complex multiphysics engineering and scientific applications [2, 4, 3]. Epetra is one of its basic packages. It provides serial and parallel linear algebra capabilities. Before Trilinos version 11.0, released in 2012, Epetra used the C++ int data-type for storing global and local indices for degrees of freedom (DOFs). Since int is typically 32-bit, this limited the largest problem size to be smaller than approximately two billion DOFs. This was true even if a distributed memory machine could handle larger problems. We have added optional support for C++ long long data-type, which is at least 64-bit wide, for global indices. To save memory, maintain the speed of memory-bound operations, and reduce further changes to the code, the local indices are still 32-bit. We document the changes required to achieve this feature and how the new functionality can be used. We also report on the lessons learned in modifying a mature and popular package from various perspectives - design goals, backward compatibility, engineering decisions, C++ language features, effects on existing users and other packages, and build integration.

  11. The effect of dimension limits on the performance indices of Stirling engine MAC-02

    SciTech Connect (OSTI)

    Abenavoli, R.I.; Carlini, M.; Kormanski, H.; Rudzinska, K.

    1995-12-31

    The paper presents a comparative study of different Stirling engine MAC-02 specifications. The MAC-02 is the engine of beta configuration with heater and cooler tubes drilled inside the cylinder wall and connected by an annular regenerator of wire mesh type, surrounding the cylinder. Piston and displacer are driven by Ericsson linkage, which brings some advantages with respect to other conventional drives, however, for its complexity it has not been considered yet in published Stirling engine optimization codes. The most difficult aspects in designing such an engine configuration is the strong interdependence among constructional parameters particularly drive rod angularity, rod, cylinder, piston and heat exchanger dimensions. For this reason a special method for the optimal engine synthesis was elaborated and presented in Impero Abenavoli, R., et al. (1993). The corresponding computer code SE-OPT was used to obtain results discussed in this paper. A number of the engine design specifications were calculated and compared one to another. Each of the cases under consideration was determined as the optimal solution of non-linear programming problem defined with different engine dimension boundaries. The maximum of indicated power was chosen as the objective function. Although several tens of constraints were included into the optimization problems, only the limits imposed on the total engine length and cylinder diameter are analyzed in this paper. The two parameters were considered as variables dependent on the other ones (free and fixed parameters). The effect of these main engine dimension limits on selected performance indices (indicated power and efficiency) and the optimal values of other ensure parameters such as heat exchanger dimensions, linkage parameters and piston phrase angles were investigated.

  12. Performance limits for exo-clutter Ground Moving Target Indicator (GMTI) radar.

    SciTech Connect (OSTI)

    Doerry, Armin Walter

    2010-09-01

    The performance of a Ground Moving Target Indicator (GMTI) radar system depends on a variety of factors, many which are interdependent in some manner. It is often difficult to 'get your arms around' the problem of ascertaining achievable performance limits, and yet those limits exist and are dictated by physics. This report identifies and explores those limits, and how they depend on hardware system parameters and environmental conditions. Ultimately, this leads to a characterization of parameters that offer optimum performance for the overall GMTI radar system. While the information herein is not new to the literature, its collection into a single report hopes to offer some value in reducing the 'seek time'.

  13. Table HC15.7 Air-Conditioning Usage Indicators by Four Most Populated States, 2005

    Gasoline and Diesel Fuel Update (EIA)

    7 Air-Conditioning Usage Indicators by Four Most Populated States, 2005 Total.................................................................................. 111.1 7.1 7.0 8.0 12.1 Do Not Have Cooling Equipment.................................... 17.8 1.8 Q Q 4.9 Have Cooling Equipment................................................. 93.3 5.3 7.0 7.8 7.2 Use Cooling Equipment.................................................. 91.4 5.3 7.0 7.7 6.6 Have Equipment But Do Not Use

  14. Table HC6.10 Home Appliances Usage Indicators by Number of Household Members, 2005

    Gasoline and Diesel Fuel Update (EIA)

    0 Home Appliances Usage Indicators by Number of Household Members, 2005 Total.............................................................................. 111.1 30.0 34.8 18.4 15.9 12.0 Cooking Appliances Frequency of Hot Meals Cooked 3 or More Times A Day........................................... 8.2 1.4 1.9 1.4 1.0 2.4 2 Times A Day........................................................ 24.6 4.3 7.6 4.3 4.8 3.7 Once a Day............................................................ 42.3 9.9

  15. Table HC6.12 Home Electronics Usage Indicators by Number of Household Members, 2005

    Gasoline and Diesel Fuel Update (EIA)

    2 Home Electronics Usage Indicators by Number of Household Members, 2005 Total................................................................................ 111.1 30.0 34.8 18.4 15.9 12.0 Personal Computers Do Not Use a Personal Computer............................. 35.5 16.3 9.4 4.0 2.7 3.2 Use a Personal Computer.......................................... 75.6 13.8 25.4 14.4 13.2 8.8 Most-Used Personal Computer Type of PC Desk-top Model.....................................................

  16. Table HC6.7 Air-Conditioning Usage Indicators by Number of Household Members, 2005

    Gasoline and Diesel Fuel Update (EIA)

    7 Air-Conditioning Usage Indicators by Number of Household Members, 2005 Total........................................................................ 111.1 30.0 34.8 18.4 15.9 12.0 Do Not Have Cooling Equipment.......................... 17.8 5.4 5.3 2.7 2.5 2.0 Have Cooling Equipment...................................... 93.3 24.6 29.6 15.7 13.4 10.0 Use Cooling Equipment....................................... 91.4 24.0 29.1 15.5 13.2 9.7 Have Equipment But Do Not Use it......................

  17. Nuclear Energy Readiness Indicator Index (NERI): A benchmarking tool for assessing nuclear capacity in developing countries

    SciTech Connect (OSTI)

    Saum-Manning,L.

    2008-07-13

    Declining natural resources, rising oil prices, looming climate change and the introduction of nuclear energy partnerships, such as GNEP, have reinvigorated global interest in nuclear energy. The convergence of such issues has prompted countries to move ahead quickly to deal with the challenges that lie ahead. However, developing countries, in particular, often lack the domestic infrastructure and public support needed to implement a nuclear energy program in a safe, secure, and nonproliferation-conscious environment. How might countries become ready for nuclear energy? What is needed is a framework for assessing a country's readiness for nuclear energy. This paper suggests that a Nuclear Energy Readiness Indicator (NERI) Index might serve as a meaningful basis for assessing a country's status in terms of progress toward nuclear energy utilization under appropriate conditions. The NERI Index is a benchmarking tool that measures a country's level of 'readiness' for nonproliferation-conscious nuclear energy development. NERI first identifies 8 key indicators that have been recognized by the International Atomic Energy Agency as key nonproliferation and security milestones to achieve prior to establishing a nuclear energy program. It then measures a country's progress in each of these areas on a 1-5 point scale. In doing so NERI illuminates gaps or underdeveloped areas in a country's nuclear infrastructure with a view to enable stakeholders to prioritize the allocation of resources toward programs and policies supporting international nonproliferation goals through responsible nuclear energy development. On a preliminary basis, the indicators selected include: (1) demonstrated need; (2) expressed political support; (3) participation in nonproliferation and nuclear security treaties, international terrorism conventions, and export and border control arrangements; (4) national nuclear-related legal and regulatory mechanisms; (5) nuclear infrastructure; (6) the utilization of IAEA technical assistance; (7) participation in regional arrangements; and (8) public support for nuclear power. In this paper, the Index aggregates the indicators and evaluates and compares the level of readiness in seven countries that have recently expressed various degrees of interest in establishing a nuclear energy program. The NERI Index could be a valuable tool to be utilized by: (1) country officials who are considering nuclear power; (2) the international community, desiring reassurance of a country's capacity for the peaceful, safe, and secure use of nuclear energy; (3) foreign governments/NGO's, seeking to prioritize and direct resources toward developing countries; and (4) private stakeholders interested in nuclear infrastructure investment opportunities.

  18. Display device for indicating the value of a parameter in a process plant

    DOE Patents [OSTI]

    Scarola, Kenneth (Windsor, CT); Jamison, David S. (Windsor, CT); Manazir, Richard M. (North Canton, CT); Rescorl, Robert L. (Vernon, CT); Harmon, Daryl L. (Enfield, CT)

    1993-01-01

    An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

  19. ON THE CORRELATION OF LOW-ENERGY SPECTRAL INDICES AND REDSHIFTS OF GAMMA-RAY BURSTS

    SciTech Connect (OSTI)

    Geng, J. J.; Huang, Y. F., E-mail: hyf@nju.edu.cn [Department of Astronomy, Nanjing University, Nanjing 210093 (China)

    2013-02-10

    It was found by Amati et al. in 2002 that for a small sample of nine gamma-ray bursts (GRBs), more distant events appear to be systematically harder in the soft gamma-ray band. Here, we have collected a larger sample of 65 GRBs, whose time-integrated spectra are well established and can be well fitted with the so-called Band function. It is confirmed that a correlation between the redshifts (z) and the low-energy indices ({alpha}) of the Band function does exist, though it is a bit more scattered than the result of Amati et al. This correlation cannot be simply attributed to the effect of photon reddening. Furthermore, correlations between {alpha} and E {sub peak} (the peak energy in the {nu}F {sub {nu}} spectrum in the rest frame), {alpha} and E {sub iso} (the isotropic energy release), and {alpha} and L {sub iso} (the isotropic luminosity) are also found, which indicate that these parameters are somehow connected. The results may provide useful constraints on the physics of GRBs.

  20. Gene expression analysis of precision-cut human liver slices indicates stable expression of ADME-Tox related genes

    SciTech Connect (OSTI)

    Elferink, M.G.L., E-mail: m.g.l.elferink@rug.nl [Department of Pharmacokinetics, Toxicology and Targeting, Groningen Research Institute for Pharmacy, University of Groningen (Netherlands); Olinga, P. [Department of Pharmacokinetics, Toxicology and Targeting, Groningen Research Institute for Pharmacy, University of Groningen (Netherlands); van Leeuwen, E.M.; Bauerschmidt, S.; Polman, J. [Molecular Design and Informatics, MSD, Oss (Netherlands); Schoonen, W.G. [Toxicology and Drug Disposition, MSD, Oss (Netherlands); Heisterkamp, S.H. [Biostatistics and Research Decision Sciences MSD, Oss (Netherlands); Bioinformatics Centre, University of Groningen (Netherlands); Groothuis, G.M.M. [Department of Pharmacokinetics, Toxicology and Targeting, Groningen Research Institute for Pharmacy, University of Groningen (Netherlands)

    2011-05-15

    In the process of drug development it is of high importance to test the safety of new drugs with predictive value for human toxicity. A promising approach of toxicity testing is based on shifts in gene expression profiling of the liver. Toxicity screening based on animal liver cells cannot be directly extrapolated to humans due to species differences. The aim of this study was to evaluate precision-cut human liver slices as in vitro method for the prediction of human specific toxicity by toxicogenomics. The liver slices contain all cell types of the liver in their natural architecture. This is important since drug-induced toxicity often is a multi-cellular process. Previously we showed that toxicogenomic analysis of rat liver slices is highly predictive for rat in vivo toxicity. In this study we investigated the levels of gene expression during incubation up to 24 h with Affymetrix microarray technology. The analysis was focused on a broad spectrum of genes related to stress and toxicity, and on genes encoding for phase-I, -II and -III metabolizing enzymes and transporters. Observed changes in gene expression were associated with cytoskeleton remodeling, extracellular matrix and cell adhesion, but for the ADME-Tox related genes only minor changes were observed. PCA analysis showed that changes in gene expression were not associated with age, sex or source of the human livers. Slices treated with acetaminophen showed patterns of gene expression related to its toxicity. These results indicate that precision-cut human liver slices are relatively stable during 24 h of incubation and represent a valuable model for human in vitro hepatotoxicity testing despite the human inter-individual variability.

  1. Cesium-137 inventories in Alaskan Tundra, lake and marine sediments: An indicator of recent organic material transport?

    SciTech Connect (OSTI)

    Grebmeier, J.M.; Cooper, L.W. |; Larsen, I.L.; Solis, C.; Olsen, C.R.

    1993-06-01

    Tundra sampling was accomplished in 1989--1990 at Imnavait Creek, Alaska (68{degree}37` N, 149{degree}17` W). Inventories of {sup 137}Cs (102--162 mBq/cm{sup 2}) are close to expectations, based upon measured atmospheric deposition for this latitude. Accumulated inventories of {sup 137}Cs in tundra decrease by up to 50% along a transect to Prudhoe Bay (70{degree}13` N, 148{degree}30` W). Atmospheric deposition of {sup 137}Cs decreased with latitude in the Arctic, but declines in deposition would have been relatively small over this distance (200 km). This suggests a recent loss of {sup 137}Cs and possibly associated organic matter from tundra over the northern portions of the transect between Imnavait Creek and Prudhoe Bay. Sediments from Toolik Lake (68{degree}38` N, 149{degree}38` W) showed widely varying {sup 137}Cs inventories, from a low of 22 mBq/cm{sup 2} away from the lake inlet, to a high between 140 to >200 mBq/cm{sup 2} near the main stream inflow. This was indicative of recent accumulation of cesium and possibly organic material associated with it in arctic lakes, although additional sampling is needed.

  2. Indications of negative evolution for the sources of the highest energy cosmic rays

    SciTech Connect (OSTI)

    Taylor, Andrew M.; Ahlers, Markus; Hooper, Dan

    2015-09-14

    Using recent measurements of the spectrum and chemical composition of the highest energy cosmic rays, we consider the sources of these particles. We find that these data strongly prefer models in which the sources of the ultra-high-energy cosmic rays inject predominantly intermediate mass nuclei, with comparatively few protons or heavy nuclei, such as iron or silicon. If the number density of sources per comoving volume does not evolve with redshift, the injected spectrum must be very hard (α≃1) in order to fit the spectrum observed from Earth. Such a hard spectral index would be surprising and difficult to accommodate theoretically. In contrast, much softer spectral indices, consistent with the predictions of Fermi acceleration (α≃2), are favored in models with negative source evolution. Furthermore with this theoretical bias, these observations thus favor models in which the sources of the highest energy cosmic rays are preferentially located within the low-redshift universe.

  3. Indications of negative evolution for the sources of the highest energy cosmic rays

    SciTech Connect (OSTI)

    Taylor, Andrew M.; Ahlers, Markus; Hooper, Dan

    2015-09-14

    Using recent measurements of the spectrum and chemical composition of the highest energy cosmic rays, we consider the sources of these particles. We find that these data strongly prefer models in which the sources of the ultra-high-energy cosmic rays inject predominantly intermediate mass nuclei, with comparatively few protons or heavy nuclei, such as iron or silicon. If the number density of sources per comoving volume does not evolve with redshift, the injected spectrum must be very hard (??1) in order to fit the spectrum observed from Earth. Such a hard spectral index would be surprising and difficult to accommodate theoretically. In contrast, much softer spectral indices, consistent with the predictions of Fermi acceleration (??2), are favored in models with negative source evolution. Furthermore with this theoretical bias, these observations thus favor models in which the sources of the highest energy cosmic rays are preferentially located within the low-redshift universe.

  4. Table HC6.5 Space Heating Usage Indicators by Number of Household Members, 2005

    Gasoline and Diesel Fuel Update (EIA)

    5 Space Heating Usage Indicators by Number of Household Members, 2005 Total U.S. Housing Units.................................. 111.1 30.0 34.8 18.4 15.9 12.0 Do Not Have Heating Equipment..................... 1.2 0.3 0.3 Q 0.2 0.2 Have Space Heating Equipment....................... 109.8 29.7 34.5 18.2 15.6 11.8 Use Space Heating Equipment........................ 109.1 29.5 34.4 18.1 15.5 11.6 Have But Do Not Use Equipment.................... 0.8 Q Q Q Q Q Space Heating Usage During 2005

  5. Time-Domain Reflectometry for Tamper Indication in Unattended Monitoring Systems for Safeguards

    SciTech Connect (OSTI)

    Tedeschi, Jonathan R.; Smith, Leon E.; Moore, David E.; Sheen, David M.; Conrad, Ryan C.

    2014-12-17

    The International Atomic Energy Agency (IAEA) continues to expand its use of unattended, remotely monitored measurement systems. An increasing number of systems and an expanding family of instruments create challenges in terms of deployment efficiency and the implementation of data authentication measures. Pacific Northwest National Laboratory (PNNL) leads a collaboration that is exploring various tamper-indicating (TI) measures that could help to address some of the long-standing detector and data-transmission authentication challenges with IAEAs unattended systems. PNNL is investigating the viability of active time-domain reflectometry (TDR) along two parallel but interconnected paths: (1) swept-frequency TDR as the highly flexible, laboratory gold standard to which field-deployable options can be compared, and (2) a low-cost commercially available spread-spectrum TDR technology as one option for field implementation. This report describes PNNLs progress and preliminary findings from the first year of the study, and describes the path forward.

  6. "Table HC9.10 Home Appliances Usage Indicators by Climate Zone, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Climate Zone, 2005" " Million U.S. Housing Units" ,,"Climate Zone1" ,,"Less than 2,000 CDD and --",,,,"2,000 CDD or More and Less than 4,000 HDD" ,"Housing Units (millions)" ,,"Greater than 7,000 HDD","5,500 to 7,000 HDD","4,000 to 5,499 HDD","Less than 4,000 HDD" "Home Appliances Characteristics" "Total",111.1,10.9,26.1,27.3,24,22.8

  7. Optically resonant subwavelength films for tamper-indicating tags and seals

    SciTech Connect (OSTI)

    Alvine, Kyle J.; Suter, Jonathan D.; Bernacki, Bruce E.; Bennett, Wendy D.

    2015-05-23

    We present the design, modeling and performance of a proof-of-concept tamper indicating approach that exploits newly-developed subwavelength-patterned films. These films have a nanostructure-dependent resonant optical reflection that is wavelength, angle, and polarization dependent. As such, they can be tailored to fabricate overlay transparent films for tamper indication and authentication of sensitive or controlled materials not possible with currently-known technologies. An additional advantage is that the unique optical signature is dictated by the geometry and fabrication process of the nanostructures in the film, rather than on the material used. The essential structure unit in the subwavelength resonant coating is a nanoscale Open-Ring Resonator (ORR). This building block is fabricated by coating a dielectric nanoscale template with metal to form a hemispherical shell-like structure. This curved metallic shell structure has a cross-section with an intrinsic capacitance and inductance and is thus the optical equivalent to the well-known LC circuit where the capacitance and inductance are determined by the nanoshell dimensions. For structures with sub 100 nm scale, this resonance occurs in the visible electromagnetic spectrum, and in the IR for larger shells. Tampering of the film would be visible though misalignment of the angular dependence of the features in the film. It is additionally possible to add in intrinsic oxidation and strain sensitive matrix materials to further complicate tamper repair and counterfeiting. Cursory standoff readout would be relatively simple using a combination of a near-infrared (or visible) LED flashlight and polarizer or passively using room lighting illumination and a dispersive detector.

  8. Gas Generation Rates as an Indicator for the Long Term Stability of Radioactive Waste Products

    SciTech Connect (OSTI)

    Steyer, S.; Brennecke, P.; Bandt, G.; Kroger, H.

    2007-07-01

    Pursuant to the 'Act on the Peaceful Utilization of Atomic Energy and the Protection against its Hazards' (Atomic Energy Act) the Federal Office for Radiation Protection (Bundesamt fuer Strahlenschutz, BfS) is legally responsible for the construction and operation of federal facilities for the disposal of radioactive waste. Within the scope of this responsibility, particular due to par. 74(1) Ordinance on Radiation Protection, BfS defines all safety-related requirements on waste packages envisaged for disposal, establishes guidelines for the conditioning of radioactive waste and approves the fulfillment of the waste acceptance requirements within the radioactive waste quality control system. BfS also provides criteria to enable the assessment of methods for the treatment and packaging of radioactive waste to produce waste packages suitable for disposal according to par. 74(2) Ordinance on Radiation Protection. Due to the present non-availability of a repository in Germany, quality control measures for all types of radioactive waste products are carried out prior to interim storage with respect to the future disposal. As a result BfS approves the demonstrated properties of the radioactive waste packages and confirms the fulfillment of the respective requirements. After several years of storage the properties of waste packages might have changed. By proving, that such changes have no significant impact on the quality of the waste product, the effort of requalification could be minimized. Therefore, data on the long-term behavior of radioactive waste products need to be acquired and indicators to prove the long-term stability have to be quantified. Preferably, such indicators can be determined easily with non-destructive methods, even for legacy waste packages. A promising parameter is the gas generation rate. The relationship between gas generation rate and long term stability is presented as first result of an ongoing study on behalf of BfS. Permissible gas generation rates that ensure adequate product stability with respect to future disposal are to be identified. (authors)

  9. Multi-analytical approach reveals potential microbial indicators in soil for sugarcane model systems

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Navarrete, Acacio Aparecido; Diniz, Tatiana Rosa; Braga, Lucas Palma Perez; Silva, Genivaldo Gueiros Zacarias; Franchini, Julio Cezar; Rossetto, Raffaella; Edwards, Robert Alan; Tsai, Siu Mui; Lehman, R. Michael

    2015-06-09

    This study focused on the effects of organic and inorganic amendments and straw retention on the microbial biomass (MB) and taxonomic groups of bacteria in sugarcane-cultivated soils in a greenhouse mesocosm experiment monitored for gas emissions and chemical factors. The experiment consisted of combinations of synthetic nitrogen (N), vinasse (V; a liquid waste from ethanol production), and sugarcane-straw blankets. Increases in CO2-C and N2O-N emissions were identified shortly after the addition of both N and V to the soils, thus increasing MB nitrogen (MB-N) and decreasing MB carbon (MB-C) in the N+V-amended soils and altering soil chemical factors that weremore » correlated with the MB. Across 57 soil metagenomic datasets, Actinobacteria (31.5%), Planctomycetes (12.3%), Deltaproteobacteria (12.3%), Alphaproteobacteria (12.0%) and Betaproteobacteria (11.1%) were the most dominant bacterial groups during the experiment. Differences in relative abundance of metagenomic sequences were mainly revealed for Acidobacteria, Actinobacteria, Gammaproteobacteria and Verrucomicrobia with regard to N+V fertilization and straw retention. Differential abundances in bacterial groups were confirmed using 16S rRNA gene-targeted phylum-specific primers for real-time PCR analysis in all soil samples, whose results were in accordance with sequence data, except for Gammaproteobacteria. Actinobacteria were more responsive to straw retention with Rubrobacterales, Bifidobacteriales and Actinomycetales related to the chemical factors of N+V-amended soils. Acidobacteria subgroup 7 and Opitutae, a verrucomicrobial class, were related to the chemical factors of soils without straw retention as a surface blanket. Taken together, the results showed that MB-C and MB-N responded to changes in soil chemical factors and CO2-C and N2O-N emissions, especially for N+V-amended soils. The results also indicated that several taxonomic groups of bacteria, such as Acidobacteria, Actinobacteria and Verrucomicrobia, and their subgroups acted as early-warning indicators of N+V amendments and straw retention in sugarcane-cultivated soils, which can alter the soil chemical factors.« less

  10. Multi-analytical approach reveals potential microbial indicators in soil for sugarcane model systems

    SciTech Connect (OSTI)

    Navarrete, Acacio Aparecido; Diniz, Tatiana Rosa; Braga, Lucas Palma Perez; Silva, Genivaldo Gueiros Zacarias; Franchini, Julio Cezar; Rossetto, Raffaella; Edwards, Robert Alan; Tsai, Siu Mui; Lehman, R. Michael

    2015-06-09

    This study focused on the effects of organic and inorganic amendments and straw retention on the microbial biomass (MB) and taxonomic groups of bacteria in sugarcane-cultivated soils in a greenhouse mesocosm experiment monitored for gas emissions and chemical factors. The experiment consisted of combinations of synthetic nitrogen (N), vinasse (V; a liquid waste from ethanol production), and sugarcane-straw blankets. Increases in CO2-C and N2O-N emissions were identified shortly after the addition of both N and V to the soils, thus increasing MB nitrogen (MB-N) and decreasing MB carbon (MB-C) in the N+V-amended soils and altering soil chemical factors that were correlated with the MB. Across 57 soil metagenomic datasets, Actinobacteria (31.5%), Planctomycetes (12.3%), Deltaproteobacteria (12.3%), Alphaproteobacteria (12.0%) and Betaproteobacteria (11.1%) were the most dominant bacterial groups during the experiment. Differences in relative abundance of metagenomic sequences were mainly revealed for Acidobacteria, Actinobacteria, Gammaproteobacteria and Verrucomicrobia with regard to N+V fertilization and straw retention. Differential abundances in bacterial groups were confirmed using 16S rRNA gene-targeted phylum-specific primers for real-time PCR analysis in all soil samples, whose results were in accordance with sequence data, except for Gammaproteobacteria. Actinobacteria were more responsive to straw retention with Rubrobacterales, Bifidobacteriales and Actinomycetales related to the chemical factors of N+V-amended soils. Acidobacteria subgroup 7 and Opitutae, a verrucomicrobial class, were related to the chemical factors of soils without straw retention as a surface blanket. Taken together, the results showed that MB-C and MB-N responded to changes in soil chemical factors and CO2-C and N2O-N emissions, especially for N+V-amended soils. The results also indicated that several taxonomic groups of bacteria, such as Acidobacteria, Actinobacteria and Verrucomicrobia, and their subgroups acted as early-warning indicators of N+V amendments and straw retention in sugarcane-cultivated soils, which can alter the soil chemical factors.

  11. Idaho National Engineering and Environmental Laboratory radiological control performance indicator report. Third quarter, calendar year 1997

    SciTech Connect (OSTI)

    1997-11-01

    This document provides a report and analysis of the Radiological Control Program through the third quarter of calendar year 1997 (CY-97) at the Idaho National Engineering and Environmental Laboratory (INEEL) under the direction of Lockheed Martin Idaho Technologies Company (LMITCO). This Performance Indicator Report is provided in accordance with Article 133 of the INEEL Radiological Control Manual. The INEEL collective occupational radiation exposure goal (deep dose) has been revised from 137 person-rem to 102.465 person-rem. Aggressive application of ALARA protective measures has resulted in a 66.834 person-rem deep dose compared to projected third quarter goal of 85.5 person-rem. Dose savings at the ICPP Tank Farm and rescheduling of some of the ROVER work account for most of the difference in the goal and actual dose year to date. Work at the ICPP Tank farm has resulted in about 14 rem dose savings. The RWMC has also reduced exposure by moving waste to new temporary storage facilities well ahead of schedule.

  12. ADVANCES IN HYDROGEOCHEMICAL INDICATORS FOR THE DISCOVERY OF NEW GEOTHERMAL RESOURCES IN THE GREAT BASIN, USA

    SciTech Connect (OSTI)

    Simmons, Stuart F; Spycher, Nicolas; Sonnenthal, Eric; Dobson, Patrick

    2013-05-20

    This report summarizes the results of Phase I work for a go/no go decision on Phase II funding. In the first objective, we assessed the extent to which fluid-mineral equilibria controlled deep water compositions in geothermal systems across the Great Basin. Six systems were evaluated: Beowawe; Desert Peak; Dixie Valley; Mammoth; Raft River; Roosevelt. These represent a geographic spread of geothermal resources, in different geological settings and with a wide range of fluid compositions. The results were used for calibration/reformulation of chemical geothermometers that reflect the reservoir temperatures in producing reservoirs. In the second objective, we developed a reactive -transport model of the Desert Peak hydrothermal system to evaluate the processes that affect reservoir fluid geochemistry and its effect on solute geothermometry. This included testing geothermometry on reacted thermal water originating from different lithologies and from near-surface locations where the temperature is known from the simulation. The integrated multi-component geothermometer (GeoT, relying on computed mineral saturation indices) was tested against the model results and also on the systems studied in the first objective.

  13. Assessment of current cybersecurity practices in the public domain : cyber indications and warnings domain.

    SciTech Connect (OSTI)

    Hamlet, Jason R.; Keliiaa, Curtis M.

    2010-09-01

    This report assesses current public domain cyber security practices with respect to cyber indications and warnings. It describes cybersecurity industry and government activities, including cybersecurity tools, methods, practices, and international and government-wide initiatives known to be impacting current practice. Of particular note are the U.S. Government's Trusted Internet Connection (TIC) and 'Einstein' programs, which are serving to consolidate the Government's internet access points and to provide some capability to monitor and mitigate cyber attacks. Next, this report catalogs activities undertaken by various industry and government entities. In addition, it assesses the benchmarks of HPC capability and other HPC attributes that may lend themselves to assist in the solution of this problem. This report draws few conclusions, as it is intended to assess current practice in preparation for future work, however, no explicit references to HPC usage for the purpose of analyzing cyber infrastructure in near-real-time were found in the current practice. This report and a related SAND2010-4766 National Cyber Defense High Performance Computing and Analysis: Concepts, Planning and Roadmap report are intended to provoke discussion throughout a broad audience about developing a cohesive HPC centric solution to wide-area cybersecurity problems.

  14. Indications of negative evolution for the sources of the highest energy cosmic rays

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Taylor, Andrew M.; Ahlers, Markus; Hooper, Dan

    2015-09-14

    Using recent measurements of the spectrum and chemical composition of the highest energy cosmic rays, we consider the sources of these particles. We find that these data strongly prefer models in which the sources of the ultra-high-energy cosmic rays inject predominantly intermediate mass nuclei, with comparatively few protons or heavy nuclei, such as iron or silicon. If the number density of sources per comoving volume does not evolve with redshift, the injected spectrum must be very hard (α≃1) in order to fit the spectrum observed from Earth. Such a hard spectral index would be surprising and difficult to accommodate theoretically.more » In contrast, much softer spectral indices, consistent with the predictions of Fermi acceleration (α≃2), are favored in models with negative source evolution. Furthermore with this theoretical bias, these observations thus favor models in which the sources of the highest energy cosmic rays are preferentially located within the low-redshift universe.« less

  15. The use of Ahuachapan fluid chemistry to indicate natural state conditions and reservoir processes during exploitation

    SciTech Connect (OSTI)

    Treusdell, A.H. ); Aunzo, Z.; Bodvarsson, G. ); Alonso, J.; Campos, A. )

    1989-01-01

    Chemical analyses of production fluids from Ahuachapan, El Salvador, have been used to indicate natural state reservoir fluid temperatures and chloride concentrations and reservoir processes resulting from exploitation. Geothermometer temperatures (Na--K--Ca and SiO{sub 2}) and calculated aquifer Cl for early flows show a gradient from about 265{degree}C and 9000 ppM Cl in the western part of the well field to 235{degree}C and 6000 ppM Cl in the eastern part. The geochemical temperatures are 10--20{degree}C higher than early downhole measurements. Since exploitation started, pressures have declined over most of the drilled area with boiling and excess-enthalpy discharges in the eastern and western parts. In the center of the field, a number of wells show mixing with cooler, less-saline water. These wells are nearly coincident with a major NE-SW oriented fault that may be the conduit for downward recharge of cooler fluids from an overlying aquifer. 12 refs., 9 figs., 1 tab.

  16. Determinants of CO{sub 2} emissions in ASEAN countries using energy and mining indicators

    SciTech Connect (OSTI)

    Nordin, Sayed Kushairi Sayed; Samat, Khairul Fadzli; Ismail, Siti Fatimah; Hamzah, Khairum; Halim, Bushra Abdul; Kun, Sek Siok

    2015-05-15

    Carbon dioxide (CO{sub 2}) is the main greenhouse gas emitted from human activities. Industrial revolution is one of the triggers to accelerate the quantity of CO{sub 2} in the atmosphere which lead to undesirable changes in the cycle of carbon. Like China and United States which are affected by the economic development growth, the atmospheric CO{sub 2} level in ASEAN countries is expected to be higher from year to year. This study focuses on energy and mining indicators, namely alternative and nuclear energy, energy production, combustible renewables and waste, fossil fuel energy consumption and the pump price for diesel fuel that contribute to CO{sub 2} emissions. Six ASEAN countries were examined from 1970 to 2010 using panel data approach. The result shows that model of cross section-fixed effect is the most appropriate model with the value of R-squared is about 86%. Energy production and fossil fuel energy consumption are found to be significantly influenced to CO{sub 2} emissions.

  17. Performance Indicators for Uranium Bioremediation in the Subsurface: Basis and Assessment

    SciTech Connect (OSTI)

    Long, Philip E.; Yabusaki, Steven B.

    2006-12-29

    The purpose of this letter report is to identify performance indicators for in situ engineered bioremediation of subsurface uranium (U) contamination. This report focuses on in situ treatment of groundwater by biostimulation of extant in situ microbial populations (see http://128.3.7.51/NABIR/generalinfo/primers_guides/03_NABIR_primer.pdf for background information on bioremediation of metals and radionuclides). The treatment process involves amendment of the subsurface with an electron donor such as acetate, lactate, ethanol or other organic compound such that in situ microorganisms mediate the reduction of U(VI) to U(IV). U(VI) precipitates as uraninite or other insoluble U phase. Uranium is thus immobilized in place by such processes and is subject to reoxidation that may remobilize the reduced uranium. Related processes include augmenting the extant subsurface microbial populations, addition of electron acceptors, and introduction of chemically reducing materials such as zero-valent Fe. While metrics for such processes may be similar to those for in situ biostimulation, these related processes are not directly in the scope of this letter report.

  18. CHEMICAL SIGNATURE INDICATING A LACK OF MASSIVE STARS IN DWARF GALAXIES

    SciTech Connect (OSTI)

    Tsujimoto, Takuji, E-mail: taku.tsujimoto@nao.ac.jp [National Astronomical Observatory of Japan, Mitaka-shi, Tokyo 181-8588 (Japan)

    2011-08-01

    Growing evidence supports an unusual elemental feature appearing in nearby dwarf galaxies, especially dwarf spheroidals (dSphs), indicating a key process of galaxy evolution that is different from that of the Galaxy. In addition to the well-known deficiency of {alpha}-elements in dSphs, recent observations have clearly shown that s-process elements (Ba) are significantly enhanced relative to Fe, {alpha}-, and r-process elements. This enhancement occurs in some dSphs as well as in the Large Magellanic Cloud, but is unseen in the Galaxy. Here we report that this feature is evidence of the lack of very massive stars ({approx}>25 M{sub sun}) as predicted in the low star formation rate environment. We conclude that the unique elemental feature of dwarf galaxies including a low {alpha}/Fe ratio in some low-metallicity stars is, at least in some part, characterized by a different form of the initial mass function. We present a detailed model for the Fornax dSph galaxy and discuss its complex chemical enrichment history together with the nucleosynthesis site of the light s-process element Y.

  19. Image-based occupancy sensor

    DOE Patents [OSTI]

    Polese, Luigi Gentile; Brackney, Larry

    2015-05-19

    An image-based occupancy sensor includes a motion detection module that receives and processes an image signal to generate a motion detection signal, a people detection module that receives the image signal and processes the image signal to generate a people detection signal, a face detection module that receives the image signal and processes the image signal to generate a face detection signal, and a sensor integration module that receives the motion detection signal from the motion detection module, receives the people detection signal from the people detection module, receives the face detection signal from the face detection module, and generates an occupancy signal using the motion detection signal, the people detection signal, and the face detection signal, with the occupancy signal indicating vacancy or occupancy, with an occupancy indication specifying that one or more people are detected within the monitored volume.

  20. Astrophysical tests of modified gravity: Constraints from distance indicators in the nearby universe

    SciTech Connect (OSTI)

    Jain, Bhuvnesh; Vikram, Vinu; Sakstein, Jeremy

    2013-12-10

    We use distance measurements in the nearby universe to carry out new tests of gravity, surpassing other astrophysical tests by over two orders of magnitude for chameleon theories. The three nearby distance indicatorscepheids, tip of the red giant branch (TRGB) stars, and water masersoperate in gravitational fields of widely different strengths. This enables tests of scalar-tensor gravity theories because they are screened from enhanced forces to different extents. Inferred distances from cepheids and TRGB stars are altered (in opposite directions) over a range of chameleon gravity theory parameters well below the sensitivity of cosmological probes. Using published data, we have compared cepheid and TRGB distances in a sample of unscreened dwarf galaxies within 10 Mpc. We use a comparable set of screened galaxies as a control sample. We find no evidence for the order unity force enhancements expected in these theories. Using a two-parameter description of the models (the coupling strength and background field value), we obtain constraints on both the chameleon and symmetron screening scenarios. In particular we show that f(R) models with background field values f {sub R0} above 5 10{sup 7} are ruled out at the 95% confidence level. We also compare TRGB and maser distances to the galaxy NGC 4258 as a second test for larger field values. While there are several approximations and caveats in our study, our analysis demonstrates the power of gravity tests in the local universe. We discuss the prospects for additional improved tests with future observations.

  1. Quadrature conductivity: A quantitative indicator of bacterial abundance in porous media

    SciTech Connect (OSTI)

    Chi Zhang; Andre Revil; Yoshiko Fujita; Junko Munakata-Marr; George Redden

    2014-09-01

    ABSTRACT The abundance and growth stages of bacteria in subsurface porous media affect the concentrations and distributions of charged species within the solid-solution interfaces. Therefore, spectral induced polarization (SIP) measurements can be used to monitor changes in bacterial biomass and growth stage. Our goal was to gain a better understanding of the SIP response of bacteria present in a porous material. Bacterial cell surfaces possess an electric double layer and therefore become polarized in an electric field. We performed SIP measurements over the frequency range of 0.11 kHz on cell suspensions alone and cell suspensions mixed with sand at four pore water conductivities. We used Zymomonas mobilis at four different cell densities (in- cluding the background). The quadrature conductivity spectra exhibited two peaks, one around 0.050.10 Hz and the other around 110 Hz. Because SIP measurements on bacterial suspensions are typically made at frequencies greater than 1 Hz, these peaks have not been previously reported. In the bac-terial suspensions in growth medium, the quadrature conduc-tivity at peak I was linearly proportional to the density of the bacteria. For the case of the suspensions mixed with sands, we observed that peak II presented a smaller increase in the quadrature conductivity with the cell density. A comparison of the experiments with and without sand grains illustrated the effect of the porous medium on the overall quadrature con- ductivity response (decrease in the amplitude and shift of the peaks to the lower frequencies). Our results indicate that for a given porous medium, time-lapse SIP has potential for mon- itoring changes in bacterial abundance within porous media.

  2. Model Based Structural Evaluation & Design of Overpack Container for Bag-Buster Processing of TRU Waste Drums

    SciTech Connect (OSTI)

    D. T. Clark; A. S. Siahpush; G. L. Anderson

    2004-07-01

    This paper describes a materials and computational model based analysis utilized to design an engineered overpack container capable of maintaining structural integrity for confinement of transuranic wastes undergoing the cryo-vacuum stress based Bag-Buster process and satisfying DOT 7A waste package requirements. The engineered overpack is a key component of the Ultra-BagBuster process/system being commercially developed by UltraTech International for potential DOE applications to non-intrusively breach inner confinement layers (poly bags/packaging) within transuranic (TRU) waste drums. This system provides a lower cost/risk approach to mitigate hydrogen gas concentration buildup limitations on transport of high alpha activity organic transuranic wastes. Four evolving overpack design configurations and two materials (low carbon steel and 300 series stainless) were considered and evaluated using non-linear finite element model analyses of structural response. Properties comparisons show that 300-series stainless is required to provide assurance of ductility and structural integrity at both room and cryogenic temperatures. The overpack designs were analyzed for five accidental drop impact orientations onto an unyielding surface (dropped flat on bottom, bottom corner, side, top corner, and top). The first three design configurations failed the bottom and top corner drop orientations (flat bottom, top, and side plates breached or underwent material failure). The fourth design utilized a protruding rim-ring (skirt) below the overpacks bottom plate and above the overpacks lid plate to absorb much of the impact energy and maintained structural integrity under all accidental drop loads at both room and cryogenic temperature conditions. Selected drop testing of the final design will be required to confirm design performance.

  3. Life cycle assessment of base-load heat sources for district heating system options

    SciTech Connect (OSTI)

    Ghafghazi, Saeed; Sowlati, T.; Sokhansanj, Shahabaddine; Melin, Staffan

    2011-03-01

    Purpose There has been an increased interest in utilizing renewable energy sources in district heating systems. District heating systems are centralized systems that provide heat for residential and commercial buildings in a community. While various renewable and conventional energy sources can be used in such systems, many stakeholders are interested in choosing the feasible option with the least environmental impacts. This paper evaluates and compares environmental burdens of alternative energy source options for the base load of a district heating center in Vancouver, British Columbia (BC) using the life cycle assessment method. The considered energy sources include natural gas, wood pellet, sewer heat, and ground heat. Methods The life cycle stages considered in the LCA model cover all stages from fuel production, fuel transmission/transportation, construction, operation, and finally demolition of the district heating system. The impact categories were analyzed based on the IMPACT 2002+ method. Results and discussion On a life-cycle basis, the global warming effect of renewable energy options were at least 200 kgeqCO2 less than that of the natural gas option per MWh of heat produced by the base load system. It was concluded that less than 25% of the upstream global warming impact associated with the wood pellet energy source option was due to transportation activities and about 50% of that was resulted from wood pellet production processes. In comparison with other energy options, the wood pellets option has higher impacts on respiratory of inorganics, terrestrial ecotoxicity, acidification, and nutrification categories. Among renewable options, the global warming impact of heat pump options in the studied case in Vancouver, BC, were lower than the wood pellet option due to BC's low carbon electricity generation profile. Ozone layer depletion and mineral extraction were the highest for the heat pump options due to extensive construction required for these options. Conclusions Natural gas utilization as the primary heat source for district heat production implies environmental complications beyond just the global warming impacts. Diffusing renewable energy sources for generating the base load district heat would reduce human toxicity, ecosystem quality degradation, global warming, and resource depletion compared to the case of natural gas. Reducing fossil fuel dependency in various stages of wood pellet production can remarkably reduce the upstream global warming impact of using wood pellets for district heat generation.

  4. Constructing vulnerabilty and protective measures indices for the enhanced critical infrastructure protection program.

    SciTech Connect (OSTI)

    Fisher, R. E.; Buehring, W. A.; Whitfield, R. G.; Bassett, G. W.; Dickinson, D. C.; Haffenden, R. A.; Klett, M. S.; Lawlor, M. A.; Decision and Information Sciences; LANL

    2009-10-14

    The US Department of Homeland Security (DHS) has directed its Protective Security Advisors (PSAs) to form partnerships with the owners and operators of assets most essential to the Nation's well being - a subclass of critical infrastructure and key resources (CIKR) - and to conduct site visits for these and other high-risk assets as part of the Enhanced Critical Infrastructure Protection (ECIP) Program. During each such visit, the PSA documents information about the facility's current CIKR protection posture and overall security awareness. The primary goals for ECIP site visits (DHS 2009) are to: (1) inform facility owners and operators of the importance of their facilities as an identified high-priority CIKR and the need to be vigilant in light of the ever-present threat of terrorism; (2) identify protective measures currently in place at these facilities, provide comparisons of CIKR protection postures across like assets, and track the implementation of new protective measures; and (3) enhance existing relationships among facility owners and operators; DHS; and various Federal, State, local tribal, and territorial partners. PSAs conduct ECIP visits to assess overall site security; educate facility owners and operators about security; help owners and operators identify gaps and potential improvements; and promote communication and information sharing among facility owners and operators, DHS, State governments, and other security partners. Information collected during ECIP visits is used to develop metrics; conduct sector-by-sector and cross-sector vulnerability comparisons; identify security gaps and trends across CIKR sectors and subsectors; establish sector baseline security survey results; and track progress toward improving CIKR security through activities, programs, outreach, and training (Snyder 2009). The data being collected are used in a framework consistent with the National Infrastructure Protection Plan (NIPP) risk criteria (DHS 2009). The NIPP framework incorporates consequence, threat, and vulnerability components and addresses all hazards. The analysis of the vulnerability data needs to be reproducible, support risk analysis, and go beyond protection. It also needs to address important security/vulnerability topics, such as physical security, cyber security, systems analysis, and dependencies and interdependencies. This report provides an overview of the approach being developed to estimate vulnerability and provide vulnerability comparisons for sectors and subsectors. the information will be used to assist DHS in analyzing existing protective measures and vulnerability at facilities, to identify potential ways to reduce vulnerabilities, and to assist in preparing sector risk estimates. The owner/operator receives an analysis of the data collected for a specific asset, showing a comparison between the facility's protection posture/vulnerability index and those of DHS sector/subsector sites visited. This comparison gives the owner/operator an indication of the asset's security strengths and weaknesses that may be contributing factors to its vulnerability and protection posture. The information provided to the owner/operator shows how the asset compares to other similar assets within the asset's sector or subsector. A 'dashboard' display is used to illustrate the results in a convenient format. The dashboard allows the owner/operator to analyze the implementation of additional protective measures and to illustrate how such actions would impact the asset's Protective Measures Index (PMI) or Vulnerability Index (VI).

  5. Influence of Lymphatic Invasion on Locoregional Recurrence Following Mastectomy: Indication for Postmastectomy Radiotherapy for Breast Cancer Patients With One to Three Positive Nodes

    SciTech Connect (OSTI)

    Matsunuma, Ryoichi; Oguchi, Masahiko; Fujikane, Tomoko; Matsuura, Masaaki; Sakai, Takehiko; Kimura, Kiyomi; Morizono, Hidetomo; Iijima, Kotaro; Izumori, Ayumi; Miyagi, Yumi; Nishimura, Seiichiro; Makita, Masujiro; Gomi, Naoya; Horii, Rie; Akiyama, Futoshi; Iwase, Takuji

    2012-07-01

    Purpose: The indication for postmastectomy radiotherapy (PMRT) in breast cancer patients with one to three positive lymph nodes has been in discussion. The purpose of this study was to identify patient groups for whom PMRT may be indicated, focusing on varied locoregional recurrence rates depending on lymphatic invasion (ly) status. Methods and Materials: Retrospective analysis of 1,994 node-positive patients who had undergone mastectomy without postoperative radiotherapy between January 1990 and December 2000 at our hospital was performed. Patient groups for whom PMRT should be indicated were assessed using statistical tests based on the relationship between locoregional recurrence rate and ly status. Results: Multivariate analysis showed that the ly status affected the locoregional recurrence rate to as great a degree as the number of positive lymph nodes (p < 0.001). Especially for patients with one to three positive nodes, extensive ly was a more significant factor than stage T3 in the TNM staging system for locoregional recurrence (p < 0.001 vs. p = 0.295). Conclusion: Among postmastectomy patients with one to three positive lymph nodes, patients with extensive ly seem to require local therapy regimens similar to those used for patients with four or more positive nodes and also seem to require consideration of the use of PMRT.

  6. Grid-based Production

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Grid-based Production Grid-based Production PDSF is a Tier 2 site for ALICE and as such has the infrastructure in place to run automated grid-based ALICE production jobs. The main...

  7. Unattended Monitoring of HEU Production in Gaseous Centrifuge Enrichment Plants using Automated Aerosol Collection and Laser-based Enrichment Assay

    SciTech Connect (OSTI)

    Anheier, Norman C.; Bushaw, Bruce A.

    2010-08-11

    Nuclear power is enjoying rapid growth as government energy policies and public demand shift toward low carbon energy production. Pivotal to the global nuclear power renaissance is the development and deployment of robust safeguards instrumentation that allows the limited resources of the IAEA to keep pace with the expansion of the nuclear fuel cycle. Undeclared production of highly enriched uranium (HEU) remains a primary proliferation concern for modern gaseous centrifuge enrichment plants (GCEPs), due to their massive separative work unit (SWU) processing power and comparably short cascade equilibrium timescale. The Pacific Northwest National Laboratory is developing an unattended safeguards instrument, combining continuous aerosol particulate collection with uranium isotope assay, to provide timely detection of HEU production within a GCEP. This approach is based on laser vaporization of aerosol particulates, followed by laser spectroscopy to characterize the uranium enrichment level. Our prior investigation demonstrated single-shot detection sensitivity approaching the femtogram range and relative isotope ratio uncertainty better than 10% using gadolinium as a surrogate for uranium. In this paper we present measurement results on standard samples containing traces of depleted, natural, and low enriched uranium, as well as measurements on aerodynamic size uranium particles mixed in background materials (e.g., dust, minerals, soils). Improvements and optimizations in the detection electronics, signal timing, calibration, and laser alignment have lead to significant improvements in detection sensitivity and enrichment accuracy, contributing to an overall reduction in the false alarm probability. The sample substrate media was also found to play a significant role in facilitating laser-induced vaporization and the production of energetic plasma conditions, resulting in ablation optimization and further improvements in the isotope abundance sensitivity.

  8. Carbon Nanotube Based Sensors

    SciTech Connect (OSTI)

    Jiang, Mian; Lin, Yuehe

    2006-11-01

    This review article provides a comprehensive review on sensors and biosensors based on functionalized carbon nanotubes.

  9. physics-based-html

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physics-based High-Resolution Numerical Modeling of Bridge Foundation Scour

  10. "Table HC10.10 Home Appliances Usage Indicators by U.S. Census Regions, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by U.S. Census Regions, 2005" " Million U.S. Housing Units" ,"Housing Units (millions)","U.S. Census Region" "Home Appliances Usage Indicators",,"Northeast","Midwest","South","West" "Total",111.1,20.6,25.6,40.7,24.2 "Cooking Appliances" "Frequency of Hot Meals Cooked" "3 or More Times A Day",8.2,1.2,1.4,3,2.6 "2 Times A

  11. "Table HC11.10 Home Appliances Usage Indicators by Northeast Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Northeast Census Region, 2005" " Million U.S. Housing Units" ,,"Northeast Census Region" ," U.S. Housing Units (millions) " ,,,"Census Division" ,,"Total Northeast" "Home Appliances Usage Indicators",,,"Middle Atlantic","New England" "Total",111.1,20.6,15.1,5.5 "Cooking Appliances" "Frequency of Hot Meals Cooked" "3 or More Times A

  12. "Table HC12.10 Home Appliances Usage Indicators by Midwest Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Midwest Census Region, 2005" " Million U.S. Housing Units" ,,"Midwest Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total Midwest" "Home Appliances Usage Indicators",,,"East North Central","West North Central" "Total",111.1,25.6,17.7,7.9 "Cooking Appliances" "Frequency of Hot Meals Cooked" "3 or More Times A

  13. "Table HC13.10 Home Appliances Usage Indicators by South Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by South Census Region, 2005" " Million U.S. Housing Units" ,,"South Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total South" "Home Appliances Usage Indicators",,,"South Atlantic","East South Central","West South Central" "Total",111.1,40.7,21.7,6.9,12.1 "Cooking Appliances" "Frequency of Hot Meals Cooked"

  14. "Table HC14.10 Home Appliances Usage Indicators by West Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by West Census Region, 2005" " Million U.S. Housing Units" ,,"West Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total West" "Home Appliances Usage Indicators",,,"Mountain","Pacific" "Total",111.1,24.2,7.6,16.6 "Cooking Appliances" "Frequency of Hot Meals Cooked" "3 or More Times A Day",8.2,2.6,0.7,1.9 "2

  15. "Table HC15.10 Home Appliances Usage Indicators by Four Most Populated States, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Four Most Populated States, 2005" " Million U.S. Housing Units" ,"Housing Units (millions)","Four Most Populated States" "Home Appliances Usage Indicators",,"New York","Florida","Texas","California" "Total",111.1,7.1,7,8,12.1 "Cooking Appliances" "Frequency of Hot Meals Cooked" "3 or More Times A Day",8.2,0.6,0.5,0.8,1.4 "2 Times

  16. "Table HC3.10 Home Appliances Usage Indicators by Owner-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Owner-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ,"U.S. Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Home Appliances Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  17. "Table HC4.10 Home Appliances Usage Indicators by Renter-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Renter-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ," Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Home Appliances Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  18. "Table HC8.10 Home Appliances Usage Indicators by Urban/Rural Location, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Urban/Rural Location, 2005" " Million U.S. Housing Units" ,,"Urban/Rural Location (as Self-Reported)" ,"Housing Units (millions)" "Home Appliances Usage Indicators",,"City","Town","Suburbs","Rural" "Total",111.1,47.1,19,22.7,22.3 "Cooking Appliances" "Frequency of Hot Meals Cooked" "3 or More Times A Day",8.2,3.7,1.6,1.4,1.5 "2

  19. Tamper indicating seal

    DOE Patents [OSTI]

    Romero, Juan A. (Albuquerque, NM); Walker, Charles A. (Albuquerque, NM); Blair, Dianna S. (Albuquerque, NM); Bodmer, Connie C. (Albuquerque, NM)

    2012-05-29

    Seals have a flexible wire that can be looped through a hasp-like device. The seals include a body having a recess, a plug insertable into the recess and a snap ring for fastening the plug to the body. The plug and/or body can have access holes for inserting the wire into the recess. "Teeth" on the outer diameter and through-holes through the thickness of the snap ring allow for passing the ends of the flexible wire from the recess through the snap ring. The ends of the wire can be folded back over the snap ring and into engagement with the teeth. Assembly of the seal causes the ends of the wire to be securely fastened between the teeth of the snap ring and the sidewall of the recess. Seals can include a plug and/or body made of a frangible material such as glass, ceramic, glass-ceramic or brittle polymer.

  20. PULSED INDICATOR CIRCUIT

    DOE Patents [OSTI]

    Linlor, W.I.; Kerns, Q.A.

    1960-11-15

    A system is given for detecting incremental changes in a transducer impedance terminating a transmission line. Principal novelty resides in the transducer impedance terminating the line in a mismatch and a pulse generator being provided to apply discrete pulses to the input end of the line. The amplitudes of the pulses reflected to the input end of the line from the mismatched transducer impedance are then observed as a very accurate measure of the instantaneous value of the latter.

  1. International energy indicators

    SciTech Connect (OSTI)

    Bauer, E.K.

    1980-09-01

    Data are compiled and graphs are presented for Iran: Crude Oil Capacity, Production and Shut-in, 1974-1980; Saudi Arabia: Crude Oil Capacity, Production and Shut-in, 1974-1980; OPEC (Ex-Iran and Saudi Arabia): Capacity, Production and Shut-in, 1974-1980; Non-OPEC Free World and US Production of Crude Oil, 1973-1980; Oil Stocks: Free World, US, Japan and Europe (landed), 1973-1980; Petroleum Consumption by Industrial Countries, 1973-1980; USSR Crude Oil Production, 1974-1980; Free World and US Nuclear Generation Capacity, 1973-1980; US Imports of Crude Oil and Products, 1973-1980; Landed Cost of Saudi Crude in Current and 1974 Dollars; US Trade in Bituminous Coal, 1973-1980; Summary of US Merchandise Trade, 1976-1980; and Energy/GNP Ratio.

  2. Energy Intensity Indicators: Methodology

    Broader source: Energy.gov [DOE]

    The files listed below contain methodology documentation and related studies that support the information presented on this website. The files are available to view and/or download as Adobe Acrobat...

  3. Advancing the Technology Base for High Temperature Hydrogen Membranes

    SciTech Connect (OSTI)

    Dye, Robert C.; Moss, Thomas S.

    1997-12-31

    High purity hydrogen is a critical component for at least two major industrial processes: 1) the refining of conventional steels and raw pig iron into low carbon steels and high purity iron used for high performance magnets in motors, generators, alternators, transformers, and etc.; and 2) refining metallurgical grade silicon to the high- purity, polycrystalline silicon used in fabricating single crystal silicon wafers for semiconductor manufacturing. In the process of producing low carbon iron products, CO and CO2 impurities prevent efficient removal of the carbon already in the raw iron. In the refining of metallurgical grade silicon, the presence of any impurity above the part-per- million level prevents the ultimate fabrication of the large scale single crystals that are essential to the semiconductor device. In a lesser magnitude role, high quality hydrogen is used in a variety of other processes, including specialty metals refining (e.g., iridium, osmium, palladium, platinum, and ruthenium) and R{ampersand}D in areas such as organic synthesis and development of certain types of fuel cells. In all of these applications, a high-temperature hydrogen membrane can provide a method for achieving a very high purity level of hydrogen in a manner that is more economical and/or more rugged than existing techniques.

  4. Activity Based Costing

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28

    Activity Based Costing (ABC) is method for developing cost estimates in which the project is subdivided into discrete, quantifiable activities or a work unit. This chapter outlines the Activity Based Costing method and discusses applicable uses of ABC.

  5. Developing measurement indices to enhance protection and resilience of U.S. critical infrastructure and key resources.

    SciTech Connect (OSTI)

    Fisher, R. E.; Norman, M.

    2010-07-01

    The US Department of Homeland Security (DHS) is developing indices to better assist in the risk management of critical infrastructures. The first of these indices is the Protective Measures Index - a quantitative index that measures overall protection across component categories: physical security, security management, security force, information sharing, protective measures and dependencies. The Protective Measures Index, which can also be recalculated as the Vulnerability Index, is a way to compare differing protective measures (eg fence versus security training). The second of these indices is the Resilience Index, which assesses a site's resilience and consists of three primary components: robustness, resourcefulness and recovery. The third index is the Criticality Index, which assesses the importance of a facility. The Criticality Index includes economic, human, governance and mass evacuation impacts. The Protective Measures Index, Resilience Index and Criticality Index are being developed as part of the Enhanced Critical Infrastructure Protection initiative that DHS protective security advisers implement across the nation at critical facilities. This paper describes two core themes: determination of the vulnerability, resilience and criticality of a facility and comparison of the indices at different facilities.

  6. Implementation Guide - Performance Indicators (Metrics ) for Use with DOE O 440.2B, Aviation Management and Safety

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-09-19

    The Guide provides information regarding specific provisions of DOE O 440.2B and is intended to be useful in understanding and implementing performance indicators (metrics) required by the Order. Cancels DOE G 440.2B-1. Canceled by DOE N 251.98.

  7. Implementation Guide - Aviation Program Performance Indicators (Metrics) for use with DOE O 440.2B, Aviation Management And Safety

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-12-10

    The Guide provides information regarding Departmental expectations on provisions of DOE 440.2B, identifies acceptable methods of implementing Aviation Program Performance Indicators (Metrics) requirements in the Order, and identifies relevant principles and practices by referencing Government and non-Government standards. Canceled by DOE G 440.2B-1A.

  8. Models for evaluation of energy technology and policy options to maximize low carbon source penetration in the United States energy supply.

    SciTech Connect (OSTI)

    Pickard, Paul S.; Kataoka, Dawn; Reno, Marissa Devan; Malczynski, Leonard A.; Peplinski, William J.; Roach, Jesse D.; Brainard, James Robert; West, Todd H.; Schoenwald, David Alan

    2009-12-01

    An initial version of a Systems Dynamics (SD) modeling framework was developed for the analysis of a broad range of energy technology and policy questions. The specific question selected to demonstrate this process was 'what would be the carbon and import implications of expanding nuclear electric capacity to provide power for plug in hybrid vehicles?' Fifteen SNL SD energy models were reviewed and the US Energy and Greenhouse gas model (USEGM) and the Global Nuclear Futures model (GEFM) were identified as the basis for an initial modeling framework. A basic U.S. Transportation model was created to model U.S. fleet changes. The results of the rapid adoption scenario result in almost 40% of light duty vehicles being PHEV by 2040 which requires about 37 GWy/y of additional electricity demand, equivalent to about 25 new 1.4 GWe nuclear plants. The adoption rate of PHEVs would likely be the controlling factor in achieving the associated reduction in carbon emissions and imports.

  9. Consent-Based Siting

    Energy Savers [EERE]

    BASED SITING CONSENT-BASED SITING PUBLIC MEETING University of Chicago, Gleacher Center 450 North Cityfront Plaza Drive Chicago, IL 60611 March 29, 2016 12:00-1:00 PM Informal Open House and Poster Session (Before Meeting Begins) 1:00-1:15 PM Welcoming Remarks Robert Rosner, Distinguished Service Professor, Department of Astronomy & Astrophysics & Physics, University of Chicago 1:15-1:30 PM Moving Forward with Consent-Based Siting John Kotek, Acting Assistant Secretary for Nuclear

  10. TF Web Based Training

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TF-Web-Based-Training Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects & Initiatives Finance...

  11. Gasification-based biomass

    SciTech Connect (OSTI)

    None, None

    2009-01-18

    The gasification-based biomass section of the Renewable Energy Technology Characterizations describes the technical and economic status of this emerging renewable energy option for electricity supply.

  12. Performance-based Contracting

    Office of Environmental Management (EM)

    Reference: FAR 37.6; DEAR 970.1001 Overview This section provides guidance and instruction for the development and administration of Performance-Based Contracting concepts...

  13. Soy-based polyols

    SciTech Connect (OSTI)

    Suppes, Galen; Lozada, Zueica; Lubguban, Arnold

    2013-06-25

    The invention provides processes for preparing soy-based oligomeric polyols or substituted oligomeric polyols, as well as urethane bioelasteromers comprising the oligomeric polyols or substituted oligomeric polyols.

  14. Spitzer mid-IR spectroscopy of powerful 2Jy and 3CRR radio galaxies. II. AGN power indicators and unification

    SciTech Connect (OSTI)

    Dicken, D.; Tadhunter, C.; Morganti, R.; Axon, D.; Robinson, A.; Magagnoli, M.; Kharb, P.; Ramos Almeida, C.; Hardcastle, M.; Nesvadba, N. P. H.; Singh, V.; Kouwenhoven, M. B. N.; Rose, M.; Spoon, H.; Inskip, K. J.; Holt, J.

    2014-06-20

    It remains uncertain which continuum and emission line diagnostics best indicate the bolometric powers of active galactic nuclei (AGNs), especially given the attenuation caused by the circumnuclear material and the possible contamination by components related to star formation. Here we use mid-IR spectra along with multiwavelength data to investigate the merit of various diagnostics of AGN radiative power, including the mid-IR [Ne III] ?25.89 ?m and [O IV] ?25.89 ?m fine-structure lines, the optical [O III] ?5007 forbidden line, and mid-IR 24 ?m, 5 GHz radio, and X-ray continuum emission, for complete samples of 46 2Jy radio galaxies (0.05 < z < 0.7) and 17 3CRR FRII radio galaxies (z < 0.1). We find that the mid-IR [O IV] line is the most reliable indicator of AGN power for powerful radio-loud AGNs. By assuming that the [O IV] is emitted isotropically, and comparing the [O III] and 24 ?m luminosities of the broad- and narrow-line AGNs in our samples at fixed [O IV] luminosity, we show that the [O III] and 24 ?m emission are both mildly attenuated in the narrow-line compared to the broad-line objects by a factor of ?2. However, despite this attenuation, the [O III] and 24 ?m luminosities are better AGN power indicators for our sample than either the 5 GHz radio or the X-ray continuum luminosities. We also detect the mid-IR 9.7 ?m silicate feature in the spectra of many objects but not ubiquitously: at least 40% of the sample shows no clear evidence for these features. We conclude that, for the majority of powerful radio galaxies, the mid-IR lines are powered by AGN photoionization.

  15. Nitrogen isotopes as indicators of NOx source contributions to atmospheric nitrate deposition across the Midwestern and Northeastern United States

    SciTech Connect (OSTI)

    E.M. Elliott; C. Kendall; S.D. Wanke; D.A. Burns; E.W. Boyer; K. Harlin; D.J. Bain; T.J. Butler

    2007-11-15

    Global inputs of NOx are dominated by fossil fuel combustion from both stationary and vehicular sources and far exceed natural NOx sources. However, elucidating NOx sources to any given location remains a difficult challenge, despite the need for this information to develop sound regulatory and mitigation strategies. We present results from a regional-scale study of nitrogen isotopes (15N) in wet nitrate deposition across 33 sites in the midwestern and northeastern U.S. We demonstrate that spatial variations in 15N are strongly correlated with NOx emissions from surrounding stationary sources and additionally that 15N is more strongly correlated with surrounding stationary source NOx emissions than pH, SO{sub 4}{sup 2-}, or NO{sub 3}{sup -} concentrations. Although emission inventories indicate that vehicle emissions are the dominant NOx source in the eastern U.S., our results suggest that wet NO{sub 3}{sup -} deposition at sites in this study is strongly associated with NOx emissions from power plants. This suggests that large areas of the landscape potentially receive atmospheric NOy deposition inputs in excess of what one would infer from existing monitoring data alone. Moreover, we determined that spatial patterns in 15N values are a robust indicator of stationary NOx contributions to wet NO{sub 3}{sup -} deposition and hence a valuable complement to existing tools for assessing relationships between NO{sub 3}{sup -} deposition, regional emission inventories, and for evaluating progress toward NOx reduction goals. 44 refs., 3 figs.

  16. Improved Geothermometry Through Multivariate Reaction-path Modeling and Evaluation of Geomicrobiological Influences on Geochemical Temperature Indicators: Final Report

    SciTech Connect (OSTI)

    Mattson, Earl; Smith, Robert; Fujita, Yoshiko; McLing, Travis; Neupane, Ghanashyam; Palmer, Carl; Reed, David; Thompson, Vicki

    2015-03-01

    The project was aimed at demonstrating that the geothermometric predictions can be improved through the application of multi-element reaction path modeling that accounts for lithologic and tectonic settings, while also accounting for biological influences on geochemical temperature indicators. The limited utilization of chemical signatures by individual traditional geothermometer in the development of reservoir temperature estimates may have been constraining their reliability for evaluation of potential geothermal resources. This project, however, was intended to build a geothermometry tool which can integrate multi-component reaction path modeling with process-optimization capability that can be applied to dilute, low-temperature water samples to consistently predict reservoir temperature within 30 C. The project was also intended to evaluate the extent to which microbiological processes can modulate the geochemical signals in some thermal waters and influence the geothermometric predictions.

  17. Geochemical indicators of depositional environment and soruce-rock potential for the Upper Ordovician Maquoketa Group, Illinois basin

    SciTech Connect (OSTI)

    Guthrie, J.M.; Pratt, L.M. )

    1994-05-01

    Two depositional cycles are recognized within the Upper Ordovician Maquoketa Group of the Illinois basin in a core from the New Jersey Zinc 1 Parrish well of Fulton County, Illinois. Organic carbon (C[sub org]), total sulfur, [sup 13]C content of the organic carbon ([delta][sup 13]C[sub org]), hydrogen and oxygen indices (HI and OI) from Rock-Eval pyrolysis and yields of extractable organic matter (EOM) vary through the cycles. Dark-brown to black, laminated shales are present in the lower portion of each cycle and have high values of C[sub org] (1.0-3.0%), HI (500-1000 mg hydrocarbon [HC]/g total organic carbon[TOC]), and EOM (500-2500 ppm), and more negative [delta][sup 13]C[sub org] values ([delta][sup 13]C[sub org] = -30 to -30.5%). Gray to greenish-gray, bioturbated shales are present in the upper portion of each cycle and have low values of C[sub org] (<1.0%), HI (<500 mg HC/g TOC), and EOM (<500 ppm), and more positive [delta][sup 13]C[sub org] values (-28.5 to 29.5%) compared to the laminated shales. Although thermally immature or marginally mature in this core, the laminated shales represent potential source rock s for petroleum because they contain good to excellent quantities of oil-prone organic matter and are more deeply buried in other areas of the basin. Kerogen elemental data and Rock-Eval data suggest that the source of organic matter in the Maquoketa was uniform, with the notable exception of graptolite-rich layers. Distributions of saturated hydrocarbons for Maquoketa samples resemble those derived from amorphous organic matter. Variations in bulk geochemical data and carbon isotopic compositions within the Maquoketa Group indicate substantial reworking and degradation of organic matter associated with bioturbation and oxygenated depositional conditions. 64 refs., 10 figs., 1 tab.

  18. Waveguide-based optical chemical sensor

    DOE Patents [OSTI]

    Grace, Karen M.; Swanson, Basil I.; Honkanen, Seppo

    2007-03-13

    The invention provides an apparatus and method for highly selective and sensitive chemical sensing. Two modes of laser light are transmitted through a waveguide, refracted by a thin film host reagent coating on the waveguide, and analyzed in a phase sensitive detector for changes in effective refractive index. Sensor specificity is based on the particular species selective thin films of host reagents which are attached to the surface of the planar optical waveguide. The thin film of host reagents refracts laser light at different refractive indices according to what species are forming inclusion complexes with the host reagents.

  19. {sup 139}La NMR in lanthanum manganites: Indication of the presence of magnetic polarons from spectra and nuclear relaxations

    SciTech Connect (OSTI)

    Allodi, G.; De Renzi, R.; Guidi, G.

    1998-01-01

    We present {sup 139}La NMR experiments on five powder samples of lanthanum manganites, with a Mn{sup 4+} concentration ranging from the antiferromagnetic-insulator (AFM) to the ferromagnetic-conducting (FM) region of the phase diagram. We measure a positive hyperfine coupling C=0.13 T/{mu}{sub B}. A signal from nuclei in a FM environment is present at all compositions, as evidenced by a hyperfine frequency in zero-field experiments, by a positive hyperfine shift in NMR experiments below T{sub c}, and by a paramagnetic frequency shift following Curie-Weiss law. A signal from nuclei in an AFM environment is identified by a similar negative intercept Curie-Weiss law. The NMR spectra reveal a large temperature dependent fraction of static spin defects below T{sub c} in the FM domains. Nuclear relaxation indicates that the FM regions are influenced by diffusing, AFM-correlated excitations, while the AFM regions probe spin fluctuations from diffusing, FM correlated excitations. These results are interpreted in terms of electronic inhomogeneities due to the presence of a magnetic small polaron. {copyright} {ital 1998} {ital The American Physical Society}

  20. High power impulse magnetron sputtering: Current-voltage-timecharacteristics indicate the onset of sustained self-sputtering

    SciTech Connect (OSTI)

    Anders, Andre; Andersson, Joakim; Ehiasarian, Arutiun

    2007-08-03

    The commonly used current-voltage characteristics are foundinadequate for describing the pulsed nature of the high power impulsemagnetron sputtering (HIPIMS) discharge, rather, the description needs tobe expanded to current-voltage-time characteristics for each initial gaspressure. Using different target materials (Cu, Ti, Nb, C, W, Al, Cr) anda pulsed constant-voltage supply it is shown that the HIPIMS dischargestypically exhibit an initial pressure dependent current peak followed bya second phase that is power and material dependent. This suggests thatthe initial phase of a HIPIMS discharge pulse is dominated by gas ionswhereas the later phase has a strong contribution from self-sputtering.For some materials the discharge switches into a mode of sustainedself-sputtering. The very large differences between materials cannot beascribed to the different sputter yields but they indicate thatgeneration and trapping ofsecondary electrons plays a major role forcurrent-voltage-time characteristics. In particular, it is argued thatthe sustained self-sputtering phase is associated with thegeneration ofmultiply charged ions because only they can cause potential emission ofsecondary electrons whereas the yield caused by singly charged metal ionsis negligibly small.

  1. DEVELOPMENT OF A TAMPER RESISTANT/INDICATING AEROSOL COLLECTION SYSTEM FOR ENVIRONMENTAL SAMPLING AT BULK HANDLING FACILITIES

    SciTech Connect (OSTI)

    Sexton, L.

    2012-06-06

    Environmental sampling has become a key component of International Atomic Energy Agency (IAEA) safeguards approaches since its approval for use in 1996. Environmental sampling supports the IAEA's mission of drawing conclusions concerning the absence of undeclared nuclear material or nuclear activities in a Nation State. Swipe sampling is the most commonly used method for the collection of environmental samples from bulk handling facilities. However, augmenting swipe samples with an air monitoring system, which could continuously draw samples from the environment of bulk handling facilities, could improve the possibility of the detection of undeclared activities. Continuous sampling offers the opportunity to collect airborne materials before they settle onto surfaces which can be decontaminated, taken into existing duct work, filtered by plant ventilation, or escape via alternate pathways (i.e. drains, doors). Researchers at the Savannah River National Laboratory and Oak Ridge National Laboratory have been working to further develop an aerosol collection technology that could be installed at IAEA safeguarded bulk handling facilities. The addition of this technology may reduce the number of IAEA inspector visits required to effectively collect samples. The principal sample collection device is a patented Aerosol Contaminant Extractor (ACE) which utilizes electrostatic precipitation principles to deposit particulates onto selected substrates. Recent work has focused on comparing traditional swipe sampling to samples collected via an ACE system, and incorporating tamper resistant and tamper indicating (TRI) technologies into the ACE system. Development of a TRI-ACE system would allow collection of samples at uranium/plutonium bulk handling facilities in a manner that ensures sample integrity and could be an important addition to the international nuclear safeguards inspector's toolkit. This work was supported by the Next Generation Safeguards Initiative (NGSI), Office of Nonproliferation and International Security (NIS), National Nuclear Security Administration (NNSA).

  2. VALIDATION OF FIRESIDE PERFORMANCE INDICES: FOULING/CORROSION EVALUATION OF MDF PARTICLEBOARD AND BLENDS WITH WHEAT STRAW BOARD

    SciTech Connect (OSTI)

    Christopher J. Zygarlicke; Jay R. Gunderson; Donald P. McCollor

    1999-02-01

    Sauder Woodworking currently fires a large portion of all wood wastes in a boiler producing process steam. It is investigating using particleboard made from wheat straw in its manufacturing process and is concerned with the effects of the inorganics on its boiler. Wheat straw board contains higher ash contents and increased levels of potassium, creating concern over fouling characteristics in Sauder's tight boiler design. In addition, the wheat straw board contains high concentrations of chlorine, which may affect boiler tube corrosion when fired in combination with the particleboard wastes currently generated. Sauder has engaged the services of the Energy & Environmental Research Center (EERC) at the University of North Dakota to investigate the potential detrimental effects of firing blends containing wheat straw on boiler tube fouling and corrosion. Additional funding for this project was provided through the U.S. Department of Energy Jointly Sponsored Research Program (DOE JSRP) project ''Validation of Fireside Performance Indices'' to validate, improve, and expand the PCQUEST (Predictive Coal Quality Effects Screening Tool) program. The PCQUEST fuel database is constantly expanding and adding new fuels, for which the algorithms may need refinement and additional verification in order to accurately predict index values. A key focus is on performing advanced and conventional fuel analyses and adding these analyses to the PCQUEST database. Such fuels include coals of all ranks and origins, upgraded coals, petroleum coke, biomass and biomass-coal blends, and waste materials blended with coal. Since there are differences in the chemical and mineral form of the inorganic content in biomass and substantial differences in organic matrix characteristics, analysis and characterization methods developed for coal fuels may not be applicable. The project was seen to provide an excellent opportunity to test and improve the ability of PCQUEST to handle nontypical soil and biomass minerals.

  3. BASE Operator's Manual - 88-Inch Cyclotron

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BASE Operator's Manual BASE_Facility_-_SEE_Software_Operation.doc

  4. METALLICITY AND TEMPERATURE INDICATORS IN M DWARF K-BAND SPECTRA: TESTING NEW AND UPDATED CALIBRATIONS WITH OBSERVATIONS OF 133 SOLAR NEIGHBORHOOD M DWARFS

    SciTech Connect (OSTI)

    Rojas-Ayala, Barbara; Covey, Kevin R.; Lloyd, James P.; Muirhead, Philip S.

    2012-04-01

    We present K-band spectra for 133 nearby (d < 33 ps) M dwarfs, including 18 M dwarfs with reliable metallicity estimates (as inferred from an FGK type companion), 11 M dwarf planet hosts, more than 2/3 of the M dwarfs in the northern 8 pc sample, and several M dwarfs from the LSPM catalog. From these spectra, we measure equivalent widths of the Ca and Na lines, and a spectral index quantifying the absorption due to H{sub 2}O opacity (the H{sub 2}O-K2 index). Using empirical spectral type standards and synthetic models, we calibrate the H{sub 2}O-K2 index as an indicator of an M dwarf's spectral type and effective temperature. We also present a revised relationship that estimates the [Fe/H] and [M/H] metallicities of M dwarfs from their Na I, Ca I, and H{sub 2}O-K2 measurements. Comparisons to model atmosphere provide a qualitative validation of our approach, but also reveal an overall offset between the atomic line strengths predicted by models as compared to actual observations. Our metallicity estimates also reproduce expected correlations with Galactic space motions and H{alpha} emission line strengths, and return statistically identical metallicities for M dwarfs within a common multiple system. Finally, we find systematic residuals between our H{sub 2}O-based spectral types and those derived from optical spectral features with previously known sensitivity to stellar metallicity, such as TiO, and identify the CaH1 index as a promising optical index for diagnosing the metallicities of near-solar M dwarfs.

  5. Laser-Arc Hybrid Welding of Thick Section Ni-base Alloys Advanced Modeling and Experiments

    SciTech Connect (OSTI)

    Debroy, Tarasankar; Palmer, Todd; Zhang, Wei

    2015-05-21

    Hybrid laser-arc welding of nickel-base alloys can increase productivity and decrease costs during construction and repair of critical components in nuclear power plants. However, laser and hybrid welding of nickel-base alloys is not well understood. This project sought to understand the physical processes during hybrid welding necessary to fabricate quality joints in Alloy 690, a Ni- Cr-Fe alloy. This document presents a summary of the data and results collected over the course of the project. The supporting documents are a collection of the research that has been or will be published in peer-reviewed journals along with a report from the partner at the national lab. Understanding the solidification behavior of Alloy 690 is important for knowing the final properties of the weldment. A study was undertaken to calculate the solidification parameters, such as temperature gradient, solidification rate, and cooling rate in Alloy 690 welds. With this information and measured cell and dendrite arm spacings, an Alloy 690 map was constructed to guide process parameter development and interpret fusion zones in later hybrid welds. This research is contained in Solidification Map of a Nickel Base Alloy. The keyhole formed under high laser intensity gives the hybrid welding technique the greater penetration depths compared to arc welding. However, keyhole behavior can form defects in the material, so knowing transient keyhole characteristics is important. With international collaborators, a study was undertaken to validate a new process monitoring tool known as inline coherent imaging (ICI), which is able to measure the keyhole depth with spatial and temporal resolutions on the order of 10 microns and 10 microseconds. ICI was validated for five alloy systems, including Alloy 690. Additionally, the keyhole growth rates at the start of welding were measured with unprecedented accuracy. This research is contained in Real Time Monitoring of Laser Beam Welding Keyhole Depth by Laser Interferometry. During full penetration welding of thick sections, root defects can form, which result in unacceptable weld quality. A study was undertaken to determine the competing forces in root defect formation by independently changing the weight forces and surface tension forces. The weight force was altered by changing the plate thickness, and the surface tension force was altered by changing the surface condition at the bottom surface. Root defects do depend on these two forces. This research is contained in Mitigation of Root Defect in Laser and Hybrid Laser-Arc Welding. Validation of the hybrid laser-arc model is necessary to properly model heat and mass transfer and fluid flow in Alloy 690 hybrid welds. Therefore, the developed model was validated for low carbon steel. Temperatures calculated by the model were included into a microstructural model in order to calculate the phase fractions. Process maps were developed for the selection of welding parameters to avoid martensite formation. This research is contained in Fusion Zone Microstructure in Full Penetration Laser-Arc Hybrid Welding of Low Alloy Steel. Alloy 690 suffers from ductility dip cracking, a form of hot cracking. This type of cracking inhibits the use of multipass welding to join Alloy 690. Our partners at ORNL performed some hot ductility testing with Alloy 690 samples using digital image correlation. The results of this work is contained in the report Summary of 690 ductility dip cracking testing using Gleeble and digital image correlation. Macro-porosity is a limiting factor in the widespread deployment of laser and hybrid laser-arc welding for construction and repair of nuclear power plant components. Keyhole instability and fluctuation results in the formation of large bubbles, which become trapped at the advancing solid- liquid interface as pores. Laser and hybrid laser-arc welds were fabricated for a range of conditions. Porosity levels in the welds were measured in X-ray computed tomography (CT), which provides very detailed data on the size and lo

  6. Carbon Trust CECIC JV | Open Energy Information

    Open Energy Info (EERE)

    CECIC JV Jump to: navigation, search Name: Carbon Trust & CECIC JV Place: China Sector: Carbon Product: China-based JV innovator and transferrer of low carbon technology in China....

  7. Imaging based refractometers

    DOE Patents [OSTI]

    Baba, Justin S.

    2015-11-24

    Refractometers for simultaneously measuring refractive index of a sample over a range or wavelengths of light include dispersive and focusing optical systems. An optical beam including the rang of wavelengths is spectrally spread along a first axis and focused along a second axis so as to be incident to an interface between the sample and a prism at a range of angles of incidence including a critical angle for at least one wavelength. In some cases, the prism can have a triangle, parallelogram, trapezoid, or other shape. In some cases, the optical beam can be reflected off of multiple interfaces between the prism and the sample. An imaging detector is situated to receive the spectrally spread and focused light from the interface and form an image corresponding to angle of incidence as a function of wavelength. One or more critical angles are indentified and corresponding refractive indices are determined.

  8. RF-Based Accelerators

    Office of Scientific and Technical Information (OSTI)

    RF-Based Accelerators for HEDP Research ∗ John W. Staples, Andrew Sessler, Roderich Keller, LBNL, Berkeley, California, Petr Ostroumov, ANL, Argonne, Illinois, Weiren Chou, Fermilab, Batavia, Illinois Abstract Accelerator-driven High-Energy Density Physics (HEDP) experiments require typically 1 nanosecond, 1 microcoulomb pulses of mass 20 ions accelerated to several MeV to produce eV-level excitations in thin targets, the "warm dense matter" regime. Traditionally the province of

  9. hickam air force base

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hickam air force base - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  10. Base drive circuit

    DOE Patents [OSTI]

    Lange, Arnold C. (Livermore, CA)

    1995-01-01

    An improved base drive circuit (10) having a level shifter (24) for providing bistable input signals to a pair of non-linear delays (30, 32). The non-linear delays (30, 32) provide gate control to a corresponding pair of field effect transistors (100, 106) through a corresponding pair of buffer components (88, 94). The non-linear delays (30, 32) provide delayed turn-on for each of the field effect transistors (100, 106) while an associated pair of transistors (72, 80) shunt the non-linear delays (30, 32) during turn-off of the associated field effect transistor (100, 106).

  11. Base drive circuit

    DOE Patents [OSTI]

    Lange, A.C.

    1995-04-04

    An improved base drive circuit having a level shifter for providing bistable input signals to a pair of non-linear delays. The non-linear delays provide gate control to a corresponding pair of field effect transistors through a corresponding pair of buffer components. The non-linear delays provide delayed turn-on for each of the field effect transistors while an associated pair of transistors shunt the non-linear delays during turn-off of the associated field effect transistor. 2 figures.

  12. Biosensors Based on Carbon Nanotubes

    SciTech Connect (OSTI)

    Lin, Yuehe; Yantasee, Wassana; Lu, Fang; Wang, Joseph; Musameh, Mustafa; Tu, Yi; Ren, Zhifeng

    2009-03-24

    This chapter summarizes the recent development of carbon nanotube based electrochemical biosensors work at PNNL.

  13. Biosensors Based on Carbon Nanotubes

    SciTech Connect (OSTI)

    Lin, Yuehe; Yantasee, Wassana; Lu, Fang; Wang, Joseph; Musameh, Mustafa; Tu, Yi; Ren, Zhifeng; J. A. Schwarz, C. Contescu, K. Putyera

    2004-04-01

    This invited review article summarizes recent work on biosensor development based on carbon nanotubes

  14. MS Based Metabonomics

    SciTech Connect (OSTI)

    Want, Elizabeth J.; Metz, Thomas O.

    2010-03-01

    Metabonomics is the latest and least mature of the systems biology triad, which also includes genomics and proteomics, and has its origins in the early orthomolecular medicine work pioneered by Linus Pauling and Arthur Robinson. It was defined by Nicholson and colleagues in 1999 as the quantitative measurement of perturbations in the metabolite complement of an integrated biological system in response to internal or external stimuli, and is often used today to describe many non-global types of metabolite analyses. Applications of metabonomics are extensive and include toxicology, nutrition, pharmaceutical research and development, physiological monitoring and disease diagnosis. For example, blood samples from millions of neonates are tested routinely by mass spectrometry (MS) as a diagnostic tool for inborn errors of metabolism. The metabonome encompasses a wide range of structurally diverse metabolites; therefore, no single analytical platform will be sufficient. Specialized sample preparation and detection techniques are required, and advances in NMR and MS technologies have led to enhanced metabonome coverage, which in turn demands improved data analysis approaches. The role of MS in metabonomics is still evolving as instrumentation and software becomes more sophisticated and as researchers realize the strengths and limitations of current technology. MS offers a wide dynamic range, high sensitivity, and reproducible, quantitative analysis. These attributes are essential for addressing the challenges of metabonomics, as the range of metabolite concentrations easily exceeds nine orders of magnitude in biofluids, and the diversity of molecular species ranges from simple amino and organic acids to lipids and complex carbohydrates. Additional challenges arise in generating a comprehensive metabolite profile, downstream data processing and analysis, and structural characterization of important metabolites. A typical workflow of MS-based metabonomics is shown in Figure 1. Gas chromatography-(GC)-MS was the most commonly used MS-based method for small molecule analysis in the 1970s and 1980s. It is still used today for the detection of many metabolic disorders and plays a strong role in plant metabonomics. Liquid chromatography (LC)-MS approaches have grown in popularity for metabolite studies, due to simpler sample preparation, reduced analysis times through the introduction of ultra-high performance liquid chromatography (UPLC)-MS and the ability to observe a wider range of metabolites. This chapter will discuss the role of MS in metabonomics, the techniques involved in this exciting area, and the current and future applications of the field. The various bioinformatics tools and multivariate analysis techniques used to maximize information recovery and to aid in the interpretation of the very large data sets typically obtained in metabonomics studies will also be discussed. While there are many different MS-based approaches utilized in metabonomics studies, emphasis will be placed on more established methods.

  15. A NEW SYNTHETIC LIBRARY OF THE NEAR-INFRARED Ca II TRIPLET INDICES. I. INDEX DEFINITION, CALIBRATION, AND RELATIONS WITH STELLAR ATMOSPHERIC PARAMETERS

    SciTech Connect (OSTI)

    Du, W.; Luo, A. L.; Zhao, Y. H. E-mail: lal@nao.cas.cn

    2012-02-15

    Adopting the SPECTRUM package, which is a stellar spectral synthesis program, we have synthesized a comprehensive set of 2890 near-infrared (NIR) synthetic spectra with a resolution and wavelength sampling similar to the Sloan Digital Sky Survey (SDSS) and the forthcoming Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) spectra. During the synthesis, we applied the 'New grids of ATLAS9 Model Atmosphere' to develop a grid of local thermodynamic equilibrium model atmospheres for effective temperatures (T{sub eff}) ranging from 3500 to 7500 K, for surface gravities (log g) from 0.5 to 5.0 dex, for metallicities ([Fe/H]) from -4.0 to 0.5 dex, and for solar ([{alpha}/Fe] = 0.0 dex) and non-solar ([{alpha}/Fe] = +0.4 dex) abundances. This synthetic stellar library is composed of 1350 solar scaled abundance (SSA) and 1530 non-solar scaled abundance (NSSA) spectra, grounding on which we have defined a new set of NIR Ca II triplet indices and an index CaT as the sum of the three. These defined indices were automatically measured on every spectrum of the synthetic stellar library and calibrated with the indices computed on the observational spectra from the INDO-U.S. stellar library. In order to check the effect of {alpha}-element enhancement on the so-defined Ca II indices, we compared indices measured on the SSA spectra with those on the NSSA ones at the same trine of stellar parameters (T{sub eff}, log g, [Fe/H]); luckily, little influences of {alpha}-element enhancement were found. Furthermore, comparisons of our synthetic indices with the observational ones from measurements on the INDO-U.S. stellar library, the SDSS-DR7 and SDSS-DR8 spectroscopic survey are presented, respectively, for dwarfs and giants in specific. For dwarfs, our synthetic indices could well reproduce the behaviors of the observational indices versus stellar parameters, which verifies the validity of our index definitions for dwarfs. For giants, the consistency between our synthetic indices and the observational ones does not appear to be as good. However, a new synthetic library of NIR Ca II indices has been founded for deeper studies on the NIR wave band of stellar spectra, and this library is particularly appropriate for the SDSS and the forthcoming LAMOST stellar spectra. We have regressed the strength of the CaT index as a function of stellar parameters for both dwarfs and giants after a series of experimental investigations into relations of the indices with stellar parameters. For dwarfs, log g has little effect on the indices, while [Fe/H] and T{sub eff} play a role together. The leading factor is probably [Fe/H], which changes the strength of the indices by a positive trend. For giants, log g starts to influence the strength of the indices by a negative trend for the metal-poor, and even impact deeply for the metal-rich; besides, [Fe/H] and T{sub eff} still matter. In addition, we briefly discussed the major differences between our Ca II triplet indices and the CaHK doublet indices. Ultimately, a supplemental experiment was carried out to show that spectral noises do have effects on our set of NIR Ca II indices. However, the influence is not weak enough to be ignored if the signal-to-noise ratio falls below 20.

  16. Base Research Program

    SciTech Connect (OSTI)

    Everett Sondreal; John Hendrikson

    2009-03-31

    In June 2009, the Energy & Environmental Research Center (EERC) completed 11 years of research under the U.S. Department of Energy (DOE) Base Cooperative Agreement No. DE-FC26-98FT40320 funded through the Office of Fossil Energy (OFE) and administered at the National Energy Technology Laboratory (NETL). A wide range of diverse research activities were performed under annual program plans approved by NETL in seven major task areas: (1) resource characterization and waste management, (2) air quality assessment and control, (3) advanced power systems, (4) advanced fuel forms, (5) value-added coproducts, (6) advanced materials, and (7) strategic studies. This report summarizes results of the 67 research subtasks and an additional 50 strategic studies. Selected highlights in the executive summary illustrate the contribution of the research to the energy industry in areas not adequately addressed by the private sector alone. During the period of performance of the agreement, concerns have mounted over the impact of carbon emissions on climate change, and new programs have been initiated by DOE to ensure that fossil fuel resources along with renewable resources can continue to supply the nation's transportation fuel and electric power. The agreement has addressed DOE goals for reductions in CO{sub 2} emissions through efficiency, capture, and sequestration while expanding the supply and use of domestic energy resources for energy security. It has further contributed to goals for near-zero emissions from highly efficient coal-fired power plants; environmental control capabilities for SO{sub 2}, NO{sub x}, fine respirable particulate (PM{sub 2.5}), and mercury; alternative transportation fuels including liquid synfuels and hydrogen; and synergistic integration of fossil and renewable resources (e.g., wind-, biomass-, and coal-based electrical generation).

  17. A New Prognostic Index and Comparison to Three Other Indices for Patients With Brain Metastases: An Analysis of 1,960 Patients in the RTOG Database

    SciTech Connect (OSTI)

    Sperduto, Paul W. Berkey, Brian M.S.; Gaspar, Laurie E.; Mehta, Minesh; Curran, Walter

    2008-02-01

    Purpose: The purpose of this study is to introduce a new prognostic index for patients with brain metastases and compare it with three published indices. Treatment for brain metastases varies widely. A sound prognostic index is thus important to guide both clinical decision making and outcomes research. Methods and Materials: A new index was developed because of limitations in the three existing indices and new data (Radiation Therapy Oncology Group 9508) are available since the others were developed. All four indices were compared using the Radiation Therapy Oncology Group database of 1,960 patients with brain metastases from five randomized trials. The ability of the four indices to distinguish its separate classes was determined statistically. Advantages and disadvantages of each index are discussed. Results: Recursive partitioning analysis (RPA) and the new Graded Prognostic Assessment (GPA) had the most statistically significant differences between classes (p < 0.001 for all classes). Conclusions: The new index, the GPA, is as prognostic as the RPA and more prognostic than the other indices. The GPA is the least subjective, most quantitative and easiest to use of the four indices. Future clinical trials should compare the GPA with the RPA to prospectively validate these findings.

  18. Nanowire-based detector

    DOE Patents [OSTI]

    Berggren, Karl K; Hu, Xiaolong; Masciarelli, Daniele

    2014-06-24

    Systems, articles, and methods are provided related to nanowire-based detectors, which can be used for light detection in, for example, single-photon detectors. In one aspect, a variety of detectors are provided, for example one including an electrically superconductive nanowire or nanowires constructed and arranged to interact with photons to produce a detectable signal. In another aspect, fabrication methods are provided, including techniques to precisely reproduce patterns in subsequently formed layers of material using a relatively small number of fabrication steps. By precisely reproducing patterns in multiple material layers, one can form electrically insulating materials and electrically conductive materials in shapes such that incoming photons are redirected toward a nearby electrically superconductive materials (e.g., electrically superconductive nanowire(s)). For example, one or more resonance structures (e.g., comprising an electrically insulating material), which can trap electromagnetic radiation within its boundaries, can be positioned proximate the nanowire(s). The resonance structure can include, at its boundaries, electrically conductive material positioned proximate the electrically superconductive nanowire such that light that would otherwise be transmitted through the sensor is redirected toward the nanowire(s) and detected. In addition, electrically conductive material can be positioned proximate the electrically superconductive nanowire (e.g. at the aperture of the resonant structure), such that light is directed by scattering from this structure into the nanowire.

  19. Tetraethyl orthosilicate-based glass composition and method

    DOE Patents [OSTI]

    Wicks, George G. (Aiken, SC); Livingston, Ronald R. (Aiken, SC); Baylor, Lewis C. (North Augusta, SC); Whitaker, Michael J. (North Augusta, SC); O'Rourke, Patrick E. (Martinez, GA)

    1997-01-01

    A tetraethyl orthosilicate-based, sol-gel glass composition with additives selected for various applications. The composition is made by mixing ethanol, water, and tetraethyl orthosilicate, adjusting the pH into the acid range, and aging the mixture at room temperature. The additives, such as an optical indicator, filler, or catalyst, are then added to the mixture to form the composition which can be applied to a substrate before curing. If the additive is an indicator, the light-absorbing characteristics of which vary upon contact with a particular analyte, the indicator can be applied to a lens, optical fiber, reagant strip, or flow cell for use in chemical analysis. Alternatively, an additive such as alumina particles is blended into the mixture to form a filler composition for patching cracks in metal, glass, or ceramic piping.

  20. Tetraethyl orthosilicate-based glass composition and method

    DOE Patents [OSTI]

    Wicks, G.G.; Livingston, R.R.; Baylor, L.C.; Whitaker, M.J.; O`Rourke, P.E.

    1997-06-10

    A tetraethyl orthosilicate-based, sol-gel glass composition with additives selected for various applications is described. The composition is made by mixing ethanol, water, and tetraethyl orthosilicate, adjusting the pH into the acid range, and aging the mixture at room temperature. The additives, such as an optical indicator, filler, or catalyst, are then added to the mixture to form the composition which can be applied to a substrate before curing. If the additive is an indicator, the light-absorbing characteristics of which vary upon contact with a particular analyte, the indicator can be applied to a lens, optical fiber, reagent strip, or flow cell for use in chemical analysis. Alternatively, an additive such as alumina particles is blended into the mixture to form a filler composition for patching cracks in metal, glass, or ceramic piping. 12 figs.

  1. Gamma thermometer based reactor core liquid level detector

    DOE Patents [OSTI]

    Burns, Thomas J. (Knoxville, TN)

    1983-01-01

    A system is provided which employs a modified gamma thermometer for determining the liquid coolant level within a nuclear reactor core. The gamma thermometer which normally is employed to monitor local core heat generation rate (reactor power), is modified by thermocouple junctions and leads to obtain an unambiguous indication of the presence or absence of coolant liquid at the gamma thermometer location. A signal processor generates a signal based on the thermometer surface heat transfer coefficient by comparing the signals from the thermocouples at the thermometer location. The generated signal is a direct indication of loss of coolant due to the change in surface heat transfer when coolant liquid drops below the thermometer location. The loss of coolant indication is independent of reactor power at the thermometer location. Further, the same thermometer may still be used for the normal power monitoring function.

  2. Behavior-based Energy Efficiency

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Behavior-based Energy Efficiency in the Pacific Northwest Clark PUD and BPA teamed up for a pilot of an innovative behavior-based energy efficiency program. Clark's pilot design...

  3. Fluorometric Tissue-based Biosensors

    SciTech Connect (OSTI)

    Greenbaum, Elias; Woodward, Charlene; Rodriguez, Jr., Miguel

    2000-11-30

    Experimental program to develop tissue-based biosensors for detection of airborne chemical warfare agents and water quality monitoring.

  4. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Low Carbon Fuel Standard California's Low Carbon Fuel Standard (LCFS) Program requires a reduction in the carbon intensity of transportation fuels that are sold, supplied, or offered for sale in the state by a minimum of 10% by 2020. The California Air Resources Board (ARB) regulations require transportation fuel producers and importers to meet specified average carbon intensity requirements for fuel. In the regulations, carbon intensity reductions are based on reformulated gasoline mixed with

  5. Engine control system having fuel-based adjustment

    DOE Patents [OSTI]

    Willi, Martin L. (Dunlap, IL); Fiveland, Scott B. (Metamora, IL); Montgomery, David T. (Edelstein, IL); Gong, Weidong (Dunlap, IL)

    2011-03-15

    A control system for an engine having a cylinder is disclosed having an engine valve configured to affect a fluid flow of the cylinder, an actuator configured to move the engine valve, and an in-cylinder sensor configured to generate a signal indicative of a characteristic of fuel entering the cylinder. The control system also has a controller in communication with the actuator and the sensor. The controller is configured to determine the characteristic of the fuel based on the signal and selectively regulate the actuator to adjust a timing of the engine valve based on the characteristic of the fuel.

  6. Magnetism and Superconductivity Compete in Iron-based Superconductors |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stanford Synchrotron Radiation Lightsource Magnetism and Superconductivity Compete in Iron-based Superconductors Wednesday, April 30, 2014 HTSC Figure 1 Fig. 1. Measured electronic structure of underdoped Ba1-xKxFe2As2 in the orthorhombic spin-density-wave (SDW) ordered state. The antiferromagnetic and ferromagnetic directions are indicated by arrows. High-temperature superconductivity (HTSC), one of the long-standing unsolved mysteries of condensed matter physics, is a beautiful example of

  7. Robust Indicators of Nonproliferation Performance

    SciTech Connect (OSTI)

    Cowan, Mara R.; Kurzrok, Andrew J.

    2014-02-13

    Understanding how the nuclear industry may benefit from self-regulation is closely linked with understanding how to report compliance activities for nonproliferation and export control objectives, as well as how to distinguish high and low compliance performance. Drawing on the corporate sustainability reporting model, nuclear and dual-use commodities industries can frame socially responsible self-regulatory activities to distinguish themselves as good nonproliferators.

  8. Level indicator for pressure vessels

    DOE Patents [OSTI]

    Not Available

    1982-04-28

    A liquid-level monitor for tracking the level of a coal slurry in a high-pressure vessel including a toroidal-shaped float with magnetically permeable bands thereon disposed within the vessel, two pairs of magnetic-field generators and detectors disposed outside the vessel adjacent the top and bottom thereof and magnetically coupled to the magnetically permeable bands on the float, and signal-processing circuitry for combining signals from the top and bottom detectors for generating a monotonically increasing analog control signal which is a function of liquid level. The control signal may be utilized to operate high-pressure control valves associated with processes in which the high-pressure vessel is used.

  9. Heterotrophic Soil Respiration in Warming Experiments: Using Microbial Indicators to Partition Contributions from Labile and Recalcitrant Soil Organic Carbon. Final Report

    SciTech Connect (OSTI)

    Bradford, M A; Melillo, J M; Reynolds, J F; Treseder, K K; Wallenstein, M D

    2010-06-10

    The central objective of the proposed work was to develop a genomic approach (nucleic acid-based) that elucidates the mechanistic basis for the observed impacts of experimental soil warming on forest soil respiration. The need to understand the mechanistic basis arises from the importance of such information for developing effective adaptation strategies for dealing with projected climate change. Specifically, robust predictions of future climate will permit the tailoring of the most effective adaptation efforts. And one of the greatest uncertainties in current global climate models is whether there will be a net loss of carbon from soils to the atmosphere as climate warms. Given that soils contain approximately 2.5 times as much carbon as the atmosphere, a net loss could lead to runaway climate warming. Indeed, most ecosystem models predict that climate warming will stimulate microbial decomposition of soil carbon, producing such a positive feedback to rising global temperatures. Yet the IPCC highlights the uncertainty regarding this projected feedback. The uncertainty arises because although warming-experiments document an initial increase in the loss of carbon from soils, the increase in respiration is short-lived, declining to control levels in a few years. This attenuation could result from changes in microbial physiology with temperature. We explored possible microbial responses to warming using experiments and modeling. Our work advances our understanding of how soil microbial communities and their activities are structured, generating insight into how soil carbon might respond to warming. We show the importance of resource partitioning in structuring microbial communities. Specifically, we quantified the relative abundance of fungal taxa that proliferated following the addition of organic substrates to soil. We added glycine, sucrose, cellulose, lignin, or tannin-protein to soils in conjunction with 3-bromo-deoxyuridine (BrdU), a nucleotide analog. Active microbes absorb BrdU from the soil solution; if they multiply in response to substrate additions, they incorporate the BrdU into their DNA. After allowing soils to incubate, we extracted BrdU-labeled DNA and sequenced the ITS regions of fungal rDNA. Fungal taxa that proliferated following substrate addition were likely using the substrate as a resource for growth. We found that the structure of active fungal communities varied significantly among substrates. The active fungal community under glycine was significantly different from those under other conditions, while the active communities under sucrose and cellulose were marginally different from each other and the control. These results indicate that the overall community structure of active fungi was altered by the addition of glycine, sucrose, and cellulose and implies that some fungal taxa respond to changes in resource availability. The community composition of active fungi is also altered by experimental warming. We found that glycine-users tended to increase under warming, while lignin-, tannin/protein-, and sucrose-users declined. The latter group of substrates requires extracellular enzymes for use, but glycine does not. It is possible that warming selects for fungal species that target, in particular, labile substrates. Linking these changes in microbial communities and resource partitioning to soil carbon dynamics, we find that substrate mineralization rates are, in general, significantly lower in soils exposed to long-term warming. This suggests that microbial use of organic substrates is impaired by warming. Yet effects are dependent on substrate identity. There are fundamental differences in the metabolic capabilities of the communities in the control and warmed soils. These differences might relate to the changes in microbial community composition, which appeared to be associated with groups specialized on different resources. We also find that functional responses indicate temperature acclimation of the microbial community. There are distinct seasonal patterns and to long-term soil warming, with higher-temperature optima for soils exposed to warmer temperatures. To relate these changes within the microbial community to potential positive feedbacks between climate warming and soil respiration, we develop a microbial-enzyme model to simulate the responses of soil carbon to warming. We find that declines in microbial biomass and degradative enzymes can explain the observed attenuation of soil-carbon emissions in response to warming. Specifically, reduced carbon-use efficiency limits the biomass of microbial decomposers and mitigates loss of soil carbon. However, microbial adaptation or a change in microbial communities could lead to an upward adjustment of the efficiency of carbon use, counteracting the decline in microbial biomass and accelerating soil-carbon loss. We conclude that the soil-carbon response to climate warming depends on the efficiency of soil microbes in using carbon.

  10. Computer-based and web-based radiation safety training

    SciTech Connect (OSTI)

    Owen, C., LLNL

    1998-03-01

    The traditional approach to delivering radiation safety training has been to provide a stand-up lecture of the topic, with the possible aid of video, and to repeat the same material periodically. New approaches to meeting training requirements are needed to address the advent of flexible work hours and telecommuting, and to better accommodate individuals learning at their own pace. Computer- based and web-based radiation safety training can provide this alternative. Computer-based and web- based training is an interactive form of learning that the student controls, resulting in enhanced and focused learning at a time most often chosen by the student.

  11. Concurrent array-based queue

    DOE Patents [OSTI]

    Heidelberger, Philip; Steinmacher-Burow, Burkhard

    2015-01-06

    According to one embodiment, a method for implementing an array-based queue in memory of a memory system that includes a controller includes configuring, in the memory, metadata of the array-based queue. The configuring comprises defining, in metadata, an array start location in the memory for the array-based queue, defining, in the metadata, an array size for the array-based queue, defining, in the metadata, a queue top for the array-based queue and defining, in the metadata, a queue bottom for the array-based queue. The method also includes the controller serving a request for an operation on the queue, the request providing the location in the memory of the metadata of the queue.

  12. Lead-based paint assessment

    SciTech Connect (OSTI)

    Lorie, C.; Cowdery, J.W.

    1994-12-31

    In 1977, The US consumer product safety commission banned the use of lead-based paint (LBP) in all industries, except the maritime industry which still has certain privileged uses. Unfortunately for property and building owners, the ban did not come soon enough. In response to this heightened awareness, several environmental market sectors addressing the issues have emerged. These include: residential; soil; commercial; water; and structures. The first and most important step in addressing the concerns posed by the existence of lead based contamination is to quantify the amount of lead-based product, to determine the location of the lead based product and the extent, if any, of lead based contamination, and to make recommendations for the remediation or abatement of the lead product and resultant contamination. In narrowing the focus of these issues, this paper discusses lead-based paint assessment; preparing and organizing the assessment, the regulatory considerations, assessment methodology, and presentation of results.

  13. SU-E-I-10: Automatic Monitoring of Accumulated Dose Indices From DICOM RDSR to Improve Radiation Safety in X-Ray Angiography

    SciTech Connect (OSTI)

    Omar, A; Bujila, R; Nowik, P; Karambatsakidou, A

    2014-06-01

    Purpose: To investigate the potential benefits of automatic monitoring of accumulated patient and staff dose indicators, i.e., CAK and KAP, from DICOM Radiation Dose Structured Reports (RDSR) in x-ray angiography (XA). Methods: Recently RDSR has enabled the convenient aggregation of dose indices and technique parameters for XA procedures. The information contained in RDSR objects for three XA systems, dedicated to different types of clinical procedures, has been collected and aggregated in a database for over one year using a system developed with open-source software at the Karolinska University Hospital. Patient weight was complemented to the RDSR data via an interface with the Hospital Information System (HIS). Results: The linearly approximated trend in KAP over a time period of a year for cerebrovascular, pelvic/peripheral vascular, and cardiovascular procedures showed a decrease of 12%, 20%, and 14%, respectively. The decrease was mainly due to hardware/software upgrades and new low-dose imaging protocols, and partially due to ongoing systematic radiation safety education of the clinical staff. The CAK was in excess of 3 Gy for 15 procedures, and exceeded 5 Gy for 3 procedures. The dose indices have also shown a significant dependence on patient weight for cardiovascular and pelvic/peripheral vascular procedures; a 10 kg shift in mean patient weight can result in a dose index increase of 25%. Conclusion: Automatic monitoring of accumulated dose indices can be utilized to notify the clinical staff and medical physicists when the dose index has exceeded a predetermined action level. This allows for convenient and systematic follow-up of patients in risk of developing deterministic skin injuries. Furthermore, trend analyses of dose indices over time is a valuable resource for the identification of potential positive or negative effects (dose increase/decrease) from changes in hardware, software, and clinical work habits.

  14. Cyber-Based Vulnerability Assessments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cyber-Based Vulnerability Assessments - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future ...

  15. Radiological Worker Computer Based Training

    Energy Science and Technology Software Center (OSTI)

    2003-02-06

    Argonne National Laboratory has developed an interactive computer based training (CBT) version of the standardized DOE Radiological Worker training program. This CD-ROM based program utilizes graphics, animation, photographs, sound and video to train users in ten topical areas: radiological fundamentals, biological effects, dose limits, ALARA, personnel monitoring, controls and postings, emergency response, contamination controls, high radiation areas, and lessons learned.

  16. Project Catalyst | Open Energy Information

    Open Energy Info (EERE)

    Support Kenya-ClimateWorks Low Carbon Growth Planning Support Malaysia-ClimateWorks Low Carbon Growth Planning Support Mexico-ClimateWorks Low Carbon Growth Planning Support...

  17. Environmental Restoration and Performance-Based Remediation....

    Broader source: Energy.gov (indexed) [DOE]

    Policy Flash Environmental Restoration and Performance-Based Remediation. . . More Documents & Publications Oversight of Performance-based Contracts CRAD, Performance-Based...

  18. Requirements Based Surveillance and Maintenance Review Process...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Based Surveillance and Maintenance Review Process Interview Form Requirements Based Surveillance and Maintenance Review Process Interview Form PDF icon Requirements Based ...

  19. System and method for knowledge based matching of users in a network

    DOE Patents [OSTI]

    Verspoor, Cornelia Maria; Sims, Benjamin Hayden; Ambrosiano, John Joseph; Cleland, Timothy James

    2011-04-26

    A knowledge-based system and methods to matchmaking and social network extension are disclosed. The system is configured to allow users to specify knowledge profiles, which are collections of concepts that indicate a certain topic or area of interest selected from an. The system utilizes the knowledge model as the semantic space within which to compare similarities in user interests. The knowledge model is hierarchical so that indications of interest in specific concepts automatically imply interest in more general concept. Similarity measures between profiles may then be calculated based on suitable distance formulas within this space.

  20. International Data Base for the U.S. Renewable Energy Industry

    SciTech Connect (OSTI)

    1986-05-01

    The International Data Base for the US Renewable Energy Industry was developed to provide the US renewable energy industry with background data for identifying and analyzing promising foreign market opportunities for their products and services. Specifically, the data base provides the following information for 161 developed and developing countries: (1) General Country Data--consisting of general energy indicators; (2) Energy Demand Data--covering commercial primary energy consumption; (3) Energy Resource Data--identifying annual average insolation, wind power, and river flow data; (4) Power System Data--indicating a wide range of electrical parameters; and (5) Business Data--including currency and credit worthiness data.