National Library of Energy BETA

Sample records for balancing item represents

  1. Balancing Item (Billion Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    to avoid disclosure of individual company data. Release Date: 05312016 Next Release Date: 06302016 Referring Pages: U.S. Natural Gas Monthly Supply and Disposition Balance

  2. Seasonality in the Natural Gas Balancing Item: Historical Trends and

    U.S. Energy Information Administration (EIA) Indexed Site

    Corrective Measures Analysis > Seasonality in the Natural Gas Balancing Item: Historical Trends and Corrective Measures Seasonality in the Natural Gas Balancing Item: Historical Trends and Corrective Measures Released: June 4, 2010 Download Full Report (PDF) This special report examines an underlying cause of the seasonal pattern in the balancing item published in the Natural Gas Monthly. Research finds that a significant portion of data collected on EIA’s primary monthly natural gas

  3. U.S. Natural Gas Balancing Item (Million Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    Balancing Item (Million Cubic Feet) U.S. Natural Gas Balancing Item (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1990's 634,809 -111,218 2000's -240,342 134,346 -13,339 -38,495 356,956 134,293 61,404 -196,323 33,472 -89,392 2010's 124,358 -130,108 -123,053 -15,729 -44,437 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 08/31/2016 Next Release Date:

  4. Seasonality in the Natural Gas Balancing Item: Historical Trends and Corrective Measures

    Reports and Publications (EIA)

    2010-01-01

    This special report examines an underlying cause of the seasonal pattern in the balancing item published in the Natural Gas Monthly.

  5. BALANCE

    DOE Patents [OSTI]

    Carmichael, H.

    1953-01-01

    A torsional-type analytical balance designed to arrive at its equilibrium point more quickly than previous balances is described. In order to prevent external heat sources creating air currents inside the balance casing that would reiard the attainment of equilibrium conditions, a relatively thick casing shaped as an inverted U is placed over the load support arms and the balance beam. This casing is of a metal of good thernnal conductivity characteristics, such as copper or aluminum, in order that heat applied to one portion of the balance is quickly conducted to all other sensitive areas, thus effectively preventing the fornnation of air currents caused by unequal heating of the balance.

  6. Action Items

    Office of Environmental Management (EM)

    ACTION ITEMS Presentation to the DOE High Level Waste Corporate Board July 29, 2009 Kurt Gerdes Office of Waste Processing DOE-EM Office of Engineering & Technology 2 ACTION ITEMS...

  7. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Specialist, Branden Brough, and visited nine House and Senate offices of California representatives, spanning both political parties. Read the full Berkeley Lab press release...

  8. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Following the merge of the Molecular Foundry and the National Center for Electron Microscopy (NCEM) at the start of FY 2015, a new logo has been created to represent the newly ...

  9. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Carbon Nanotube Porins Mimic Biological Channels Top: Schematic showing CNT porin preparation and incorporation into liposomes. Bottom: Representative conductance traces for CNT porin incorporation and gating Scientific Achievement Users of the Molecular Foundry have demonstrated that short carbon nanotubes (CNTs) insert into cell membranes and transport molecules like biological membrane channels Significance and Impact The use of CNTs "porins" are a promising biomimetic platform

  10. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Viable Single-Molecule Diodes Scientific Achievement Benefiting from the Molecular Foundry's expertise in the theory of molecular scale transport, Foundry users have designed a new technique to create single-molecule diodes that perform 50 times better than all prior designs. Significance and Impact Individual molecules represent the gold standard for electronics miniaturization, which leads to improved performance, greater utility and lower costs. Research Details A diode is a fundamental

  11. ADMIN Citation Item Title Item Summary Sub Item 1 Title Sub Item 2 Summary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ADMIN 1 Revision September 2015 Previous ADMIN 1 guidance edition: http://www.energy.gov/cio/downloads/administrative-records-schedule-1-personnel-records-revision-3 ADMIN Citation Item Title Item Summary Sub Item 1 Title Sub Item 2 Summary Sub Item 2 Applicability Media Applicability Disposition NARA Approved Citation a. Transferred employees. Department-wide Media-neutral See Chapter 7 of The Guide to Personnel Recordkeeping for instructions relating to folders of employees transferred to

  12. Action Item Review and Status

    Office of Environmental Management (EM)

    Board Action Items Action Item Resolution Action Item Strategic Planning Initiative Optimization Study Resolution Presentation by S. Schneider (HLW System Integrated Project...

  13. Facility Representatives

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-03-01

    This standard, DOE-STD-1063, Facility Representatives, defines the duties, responsibilities and qualifications for Department of Energy (DOE) Facility Representatives, based on facility hazard classification; risks to workers, the public, and the environment; and the operational activity level. This standard provides the guidance necessary to ensure that DOE’s hazardous nuclear and non-nuclear facilities have sufficient staffing of technically qualified facility representatives (FRs) to provide day-to-day oversight of contractor operations.

  14. Commercial Items Test Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached for your information is a copy of Civilian Agency Acquisition Council (CAAC) Letter 2009-04. It advises that the National Defense Authorization Act for Fiscal Year 201 0, Section 8 16 authorizes extension of the Commercial Items Test Program from January 1,20 10 to January 1,20 12 and that an expedited FAR Case is being processed to insert the new date at FAR 13.500(d). Also attached is a class deviation authorizing the use of simplified acquisition procedures for commercial items up to $5.5 million [$I1 million for acquisitions of commercial items under FAR 13.500(e)

  15. Notes and Action Items

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Notes and Action Items Notes and Action Items ERSUG Action Items from June 1996 meeting at Germantown, MD Get DOE staff on mailers for broadcast of ERSUG issues Responsibility: Kendall and Kitchens Review and comment on ERSUG Proposal to SAC Responsibility: All of ERSUG Comments to Rick Kendall by July 17th email: ra_kendall@pnl.gov Fax : (509) 375-6631 Review and comment on Requirements Document "Greenbook" Responsibility: All of ERSUG Comments to Rick Kendall by August 7th email:

  16. Item Management Control System

    Energy Science and Technology Software Center (OSTI)

    1993-08-06

    The Item Management Control System (IMCS) has been developed at Idaho National Engineering Laboratory to assist in organizing collections of documents using an IBM-PC or similar DOS system platform.

  17. Facility Representatives

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-04-06

    REPLACED BY DOE-STD-1063 | SUPERSEDING DOE-STD-1063-2000 (MARCH 2000) The purpose of the DOE Facility Representative Program is to ensure that competent DOE staff personnel are assigned to oversee the day-to-day contractor operations at DOE’s hazardous nuclear and non-nuclear facilities.

  18. Notes and Action Items

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Notes and Action Items Notes and Action Items Report on the NUGEX business meeting of June 6, 2000, in Oak Ridge Minute notes by Bas Braams First of all, many thanks to the organizers of the preceding NUG meeting: Roberta Boucher, David Dean, Brian Hingerty, Bill Kramer, Donald Spong and Malcolm Stocks. Likewise thanks to Brian Hingerty and Mike Minkoff for organizing the Users Helping Users events, and to Tom DeBoni, Osni Marques, Jeffrey Squyres and David Turner for the NERSC training classes.

  19. Pre-2012 News Items

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pre-2012 News Items Project and Communication Milestones: April 4, 2011: MINERvA receives Secretary's Award of Achievement March 14, 2012: Scientists send encoded message through rock via neutrino beam A particle physics private eye takes on the great interaction caper 2006 Fermilab Today Series: February 2, 2006: MINERvA Takes Point-Blank Aim at Neutrino Mysteries February 22, 2006: MINERvA Recycles to Tap Many Lab Resources March 1, 2006: Students on MINERvA Get to see End Result March 8,

  20. Method of data mining including determining multidimensional coordinates of each item using a predetermined scalar similarity value for each item pair

    DOE Patents [OSTI]

    Meyers, Charles E.; Davidson, George S.; Johnson, David K.; Hendrickson, Bruce A.; Wylie, Brian N.

    1999-01-01

    A method of data mining represents related items in a multidimensional space. Distance between items in the multidimensional space corresponds to the extent of relationship between the items. The user can select portions of the space to perceive. The user also can interact with and control the communication of the space, focusing attention on aspects of the space of most interest. The multidimensional spatial representation allows more ready comprehension of the structure of the relationships among the items.

  1. DOE - NNSA/NFO -- Featured Items

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Featured Items includeslanguage.htm Featured Items The Nevada Field Office Featured Items section provides quick access to brief program updates and some of the more popular new ...

  2. SF 6432-CI Commercial Items

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    150,000 APPLY TO ALL CONTRACTS EXCEEDING 5,000,000 Control : SF 6432-CI Title: Standard Terms and Conditions for Commercial Items Owner: Procurement Policy Department...

  3. CRAD, Suspect/Counterfeit Item

    Broader source: Energy.gov [DOE]

    Management should have a formal system under Quality Assurance with adequate controls defined and implemented to identify and preclude Suspect/Counterfeit Items (S/CI) from being introduced into safety systems and applications that create potential hazards.

  4. FY 2011 Annual Uncosted Balances Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Uncosted Balances Reports » FY 2011 Annual Uncosted Balances Report FY 2011 Annual Uncosted Balances Report This report represents an analysis of the Department's uncosted balances for FY 2011. In FY 2009, the American Recovery and Reinvestment Act of 2009 (Recovery Act) provided the Department an additional $36.7 billion of funding. The FY 2011 uncosted balances associated with Recovery Act funding are separately presented but are not included in the additional analysis of uncosted balances in

  5. DOE Hosts Festival to Collect Items for Area Food Banks

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – Deputy Secretary of Energy Daniel Poneman and a representative of the Capital Area Food Bank are among the guest speakers at an event this Tuesday, July 31, to collect food items for the DOE Feeds Families drive.

  6. Shaft balancing

    DOE Patents [OSTI]

    Irwin, John A.

    1979-01-01

    A gas turbine engine has an internal drive shaft including one end connected to a driven load and an opposite end connected to a turbine wheel and wherein the shaft has an in situ adjustable balance system near the critical center of a bearing span for the shaft including two 360.degree. rings piloted on the outer diameter of the shaft at a point accessible through an internal engine panel; each of the rings has a small amount of material removed from its periphery whereby both of the rings are precisely unbalanced an equivalent amount; the rings are locked circumferentially together by radial serrations thereon; numbered tangs on the outside diameter of each ring identify the circumferential location of unbalance once the rings are locked together; an aft ring of the pair of rings has a spline on its inside diameter that mates with a like spline on the shaft to lock the entire assembly together.

  7. Property Representatives Lists- HQ

    Broader source: Energy.gov [DOE]

    Authorized Property Pass Signers List and Accountable Property Representatives List, Effective April 1, 2016

  8. Method of locating related items in a geometric space for data mining

    DOE Patents [OSTI]

    Hendrickson, B.A.

    1999-07-27

    A method for locating related items in a geometric space transforms relationships among items to geometric locations. The method locates items in the geometric space so that the distance between items corresponds to the degree of relatedness. The method facilitates communication of the structure of the relationships among the items. The method is especially beneficial for communicating databases with many items, and with non-regular relationship patterns. Examples of such databases include databases containing items such as scientific papers or patents, related by citations or keywords. A computer system adapted for practice of the present invention can include a processor, a storage subsystem, a display device, and computer software to direct the location and display of the entities. The method comprises assigning numeric values as a measure of similarity between each pairing of items. A matrix is constructed, based on the numeric values. The eigenvectors and eigenvalues of the matrix are determined. Each item is located in the geometric space at coordinates determined from the eigenvectors and eigenvalues. Proper construction of the matrix and proper determination of coordinates from eigenvectors can ensure that distance between items in the geometric space is representative of the numeric value measure of the items' similarity. 12 figs.

  9. Method of locating related items in a geometric space for data mining

    DOE Patents [OSTI]

    Hendrickson, Bruce A.

    1999-01-01

    A method for locating related items in a geometric space transforms relationships among items to geometric locations. The method locates items in the geometric space so that the distance between items corresponds to the degree of relatedness. The method facilitates communication of the structure of the relationships among the items. The method is especially beneficial for communicating databases with many items, and with non-regular relationship patterns. Examples of such databases include databases containing items such as scientific papers or patents, related by citations or keywords. A computer system adapted for practice of the present invention can include a processor, a storage subsystem, a display device, and computer software to direct the location and display of the entities. The method comprises assigning numeric values as a measure of similarity between each pairing of items. A matrix is constructed, based on the numeric values. The eigenvectors and eigenvalues of the matrix are determined. Each item is located in the geometric space at coordinates determined from the eigenvectors and eigenvalues. Proper construction of the matrix and proper determination of coordinates from eigenvectors can ensure that distance between items in the geometric space is representative of the numeric value measure of the items' similarity.

  10. JOBAID-SELF ASSIGNING COURSES (ITEMS)

    Broader source: Energy.gov [DOE]

    In this jobaid you will learn to use the Course Catalog, Browse Catalog, Recommended Items, Locate and Self-Assign Items (Courses) Using the Search Catalog features, Narrow Course Searches using...

  11. SciTech Connect: Item Not Found

    Office of Scientific and Technical Information (OSTI)

    Item Not Found Item Not Found The item you requested, OSTI ID 1115360, is not available in this collection. If you followed a link to this page, that link is outdated or contains an error. Search SciTech Connect SciTech Connect Home

  12. FY 2010 Annual Uncosted Balances Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Annual Uncosted Balances Reports » FY 2010 Annual Uncosted Balances Report FY 2010 Annual Uncosted Balances Report This report represents an analysis of the Department's uncosted balances for FY 2010. In FY 2009, the American Recovery and Reinvestment Act of 2009 (Recovery Act) provided the Department an additional $36.7 billion of funding. The FY 2010 uncosted balances associated with Recovery Act funding are separately presented but are not included in the additional analysis of uncosted

  13. SF 6432-CI Commercial Items

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    11/17/15 Page 1 of 16 Printed copies of this document are uncontrolled. Retrieve latest version electronically. SANDIA CORPORATION SF 6432-CI (11/2015) SECTION II STANDARD TERMS AND CONDITIONS FOR COMMERCIAL ITEMS THE FOLLOWING CLAUSES APPLY TO THIS CONTRACT AS INDICATED UNLESS SPECIFICALLY DELETED, OR EXCEPT TO THE EXTENT THEY ARE SPECIFICALLY SUPPLEMENTED OR AMENDED IN WRITING IN THE COVER PAGE OR SECTION I. (CTRL+CLICK ON A LINK BELOW TO ADVANCE DIRECTLY TO THAT SECTION) ACCEPTANCE OF TERMS

  14. New technologies for item monitoring

    SciTech Connect (OSTI)

    Abbott, J.A.; Waddoups, I.G.

    1993-12-01

    This report responds to the Department of Energy`s request that Sandia National Laboratories compare existing technologies against several advanced technologies as they apply to DOE needs to monitor the movement of material, weapons, or personnel for safety and security programs. The authors describe several material control systems, discuss their technologies, suggest possible applications, discuss assets and limitations, and project costs for each system. The following systems are described: WATCH system (Wireless Alarm Transmission of Container Handling); Tag system (an electrostatic proximity sensor); PANTRAK system (Personnel And Material Tracking); VRIS (Vault Remote Inventory System); VSIS (Vault Safety and Inventory System); AIMS (Authenticated Item Monitoring System); EIVS (Experimental Inventory Verification System); Metrox system (canister monitoring system); TCATS (Target Cueing And Tracking System); LGVSS (Light Grid Vault Surveillance System); CSS (Container Safeguards System); SAMMS (Security Alarm and Material Monitoring System); FOIDS (Fiber Optic Intelligence & Detection System); GRADS (Graded Radiation Detection System); and PINPAL (Physical Inventory Pallet).

  15. Polarization-balanced beamsplitter

    DOE Patents [OSTI]

    Decker, Derek E.

    1998-01-01

    A beamsplitter assembly that includes several beamsplitter cubes arranged to define a plurality of polarization-balanced light paths. Each polarization-balanced light path contains one or more balanced pairs of light paths, where each balanced pair of light paths includes either two transmission light paths with orthogonal polarization effects or two reflection light paths with orthogonal polarization effects. The orthogonal pairing of said transmission and reflection light paths cancels polarization effects otherwise caused by beamsplitting.

  16. Polarization-balanced beamsplitter

    DOE Patents [OSTI]

    Decker, D.E.

    1998-02-17

    A beamsplitter assembly is disclosed that includes several beamsplitter cubes arranged to define a plurality of polarization-balanced light paths. Each polarization-balanced light path contains one or more balanced pairs of light paths, where each balanced pair of light paths includes either two transmission light paths with orthogonal polarization effects or two reflection light paths with orthogonal polarization effects. The orthogonal pairing of said transmission and reflection light paths cancels polarization effects otherwise caused by beamsplitting. 10 figs.

  17. Beyond Beginning Balances Presentation

    National Nuclear Security Administration (NNSA)

    Beyond Beginning Balances Peter Dessaules DOE/SO-62 Obligations Accounting Implementation Workshop Obligations Accounting Implementation Workshop January 13, 2004 January 13, 2004 Crowne Crowne Plaza Plaza Ravinia Ravinia Atlanta, Georgia Atlanta, Georgia Beginning Foreign Obligation Beginning Foreign Obligation Balances Balances * Why are they important? - United States Agreements for Cooperation hold Treaty status. - These Agreements require periodic reporting to the foreign countries. -

  18. Lithium Balance | Open Energy Information

    Open Energy Info (EERE)

    Balance Jump to: navigation, search Name: Lithium Balance Place: Copenhagen, Denmark Product: Lithium ion battery developer. References: Lithium Balance1 This article is a stub....

  19. Calorimetry of low mass Pu239 items

    SciTech Connect (OSTI)

    Cremers, Teresa L; Sampson, Thomas E

    2010-01-01

    Calorimetric assay has the reputation of providing the highest precision and accuracy of all nondestructive assay measurements. Unfortunately, non-destructive assay practitioners and measurement consumers often extend, inappropriately, the high precision and accuracy of calorimetric assay to very low mass items. One purpose of this document is to present more realistic expectations for the random uncertainties associated with calorimetric assay for weapons grade plutonium items with masses of 200 grams or less.

  20. Suspect/Counterfeit Item Awareness Training Manual

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Suspect/Counterfeit Items Awareness Training U.S. Department of Energy Health, Safety and Security Office of Corporate Safety Analysis This training document is in the process of being revised by the Office of Analysis (HS-24) through a partnership with the Energy Facility Contractors Group. In the interim, the Suspect/ Counterfeit Headmark List (page 11) has been updated with the most current version. June 2007 Revision 6 Suspect/Counterfeit Items Training Sponsored by the Office of Analysis

  1. Work/Life Balance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab » Work/Life Balance Work/Life Balance Explore the multiple dimensions of a career at Los Alamos Lab: work with the best minds on the planet in an inclusive environment that is rich in intellectual vitality and opportunities for growth. Complete suite of benefits to balance your career Enlarge poster enlarge Enlarge poster enlarge Enlarge poster enlarge Enlarge poster enlarge Enlarge poster enlarge Enlarge poster enlarge Enlarge poster enlarge Enlarge poster enlarge Enlarge poster enlarge

  2. Balancing coal pipes

    SciTech Connect (OSTI)

    Earley, D.; Kirkenir, B.

    2009-11-15

    Balancing coal flow to the burners to optimise combustion by using real-time measurement systems (such as microwave mass measurement) is discussed. 3 figs.

  3. Self Supplied Balancing Reserves

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Self-Supplied-Balancing-Reserves Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects &...

  4. Federal Acquisition Circular 2005-52 Item Subject FAR...

    Office of Environmental Management (EM)

    Federal Acquisition Circular 2005-52 Item Subject FAR case I Sustainable Acquisition ... VI Technical Amendments NA Item I--Sustainable Acquisition (FAR Case 2010-001) ...

  5. Integrated Program Management Report (IPMR) Data Item Description...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integrated Program Management Report (IPMR) Data Item Description (DID) Integrated Program Management Report (IPMR) Data Item Description (DID) Integrated Program Management Report...

  6. Consensus Action Items from CHP Roadmap Process, June 2001 |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Consensus Action Items from CHP Roadmap Process, June 2001 Consensus Action Items from CHP Roadmap Process, June 2001 This paper discusses three main objectives in the CHP ...

  7. Load Balancing Scientific Applications

    SciTech Connect (OSTI)

    Pearce, Olga Tkachyshyn

    2014-12-01

    The largest supercomputers have millions of independent processors, and concurrency levels are rapidly increasing. For ideal efficiency, developers of the simulations that run on these machines must ensure that computational work is evenly balanced among processors. Assigning work evenly is challenging because many large modern parallel codes simulate behavior of physical systems that evolve over time, and their workloads change over time. Furthermore, the cost of imbalanced load increases with scale because most large-scale scientific simulations today use a Single Program Multiple Data (SPMD) parallel programming model, and an increasing number of processors will wait for the slowest one at the synchronization points. To address load imbalance, many large-scale parallel applications use dynamic load balance algorithms to redistribute work evenly. The research objective of this dissertation is to develop methods to decide when and how to load balance the application, and to balance it effectively and affordably. We measure and evaluate the computational load of the application, and develop strategies to decide when and how to correct the imbalance. Depending on the simulation, a fast, local load balance algorithm may be suitable, or a more sophisticated and expensive algorithm may be required. We developed a model for comparison of load balance algorithms for a specific state of the simulation that enables the selection of a balancing algorithm that will minimize overall runtime.

  8. CHAPS: status of issues and action items

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4, 2007 CHAPS: status of issues and action items. Items to watch are shown in bold. 1. Our most recent 'off-line' conference call was on March 30, with Yin-Nan, Liz, John J. Betsy, and John H. Details of AMS plumbing were discussed. 2. Status of CVI: a. It has been installed and test flown, 3/14 & 3/16. b. We are working on an instability in one of the flow meters (feedback with the zero-air regulator?) c. Will be flown again with nephs and psaps, and again with AMS d. See full status of

  9. CITSS Configurable Item List: COTS Software | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Configurable Item List: COTS Software CITSS Configurable Item List: COTS Software CITSS Configurable Item List: COTS Software CITSS Configurable Item List: COTS Software (44.56 KB) More Documents & Publications CITSS Project Plan CITSS Project Plan Software Configuration Management Plan

  10. Suspect and Counterfeit Items Memo | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Suspect and Counterfeit Items Memo Suspect and Counterfeit Items Memo The issue of Suspect/Counterfeit Items (S/CI), specifically electronic components and integrated circuits, is an increasing problem throughout the nuclear industry. Suspect and Counterfeit Items Memo (381.26 KB) More Documents & Publications Technical Standards Newsletter - October 2015 Suspect/Counterfeit Items Awareness Training Manual Visiting Speaker Program - May 12, 2011

  11. UESC Training for Utility Representatives

    Broader source: Energy.gov [DOE]

    Provides utility representatives with additional training to meet their responsibilities with respect to Utility Energy Savings Contracts (UESC).

  12. Balance Energy | Open Energy Information

    Open Energy Info (EERE)

    Balance Energy Jump to: navigation, search Name: Balance Energy Place: San Diego, California Zip: 92127-1874 Product: California-based end to end smart grid developer. References:...

  13. Multidimensional spectral load balancing

    SciTech Connect (OSTI)

    Hendrickson, B.; Leland, R.

    1993-01-01

    We describe an algorithm for the static load balancing of scientific computations that generalizes and improves upon spectral bisection. Through a novel use of multiple eigenvectors, our new spectral algorithm can divide a computation into 4 or 8 pieces at once. These multidimensional spectral partitioning algorithms generate balanced partitions that have lower communication overhead and are less expensive to compute than those produced by spectral bisection. In addition, they automatically work to minimize message contention on a hypercube or mesh architecture. These spectral partitions are further improved by a multidimensional generalization of the Kernighan-Lin graph partitioning algorithm. Results on several computational grids are given and compared with other popular methods.

  14. Multidimensional spectral load balancing

    DOE Patents [OSTI]

    Hendrickson, Bruce A.; Leland, Robert W.

    1996-12-24

    A method of and apparatus for graph partitioning involving the use of a plurality of eigenvectors of the Laplacian matrix of the graph of the problem for which load balancing is desired. The invention is particularly useful for optimizing parallel computer processing of a problem and for minimizing total pathway lengths of integrated circuits in the design stage.

  15. Guide to good practices for the development of test items

    SciTech Connect (OSTI)

    1997-01-01

    While the methodology used in developing test items can vary significantly, to ensure quality examinations, test items should be developed systematically. Test design and development is discussed in the DOE Guide to Good Practices for Design, Development, and Implementation of Examinations. This guide is intended to be a supplement by providing more detailed guidance on the development of specific test items. This guide addresses the development of written examination test items primarily. However, many of the concepts also apply to oral examinations, both in the classroom and on the job. This guide is intended to be used as guidance for the classroom and laboratory instructor or curriculum developer responsible for the construction of individual test items. This document focuses on written test items, but includes information relative to open-reference (open book) examination test items, as well. These test items have been categorized as short-answer, multiple-choice, or essay. Each test item format is described, examples are provided, and a procedure for development is included. The appendices provide examples for writing test items, a test item development form, and examples of various test item formats.

  16. Calorimeter measurements of low wattage items

    SciTech Connect (OSTI)

    Cremers, T.L.; Camp, K.L.; Hildner, S.S.; Sedlacek, W.A.

    1993-08-01

    The transition of DOE facilities from production to decontamination and decommissioning has led to more measurements of waste, scrap, and other less attractive materials. The difficulty that these materials pose for segmented gamma scanning and neutron counting has increased the use of calorimetric assay for very low wattage items (< 250 millwatts). We have measured well characterized {sup 238}Pu oxide ranging in wattage from 25 to 500 milliwatts in the calorimeters at the Los Alamos Plutonium Facility and report the error and the precision of the measurements.

  17. CRAD, NNSA- Facility Representatives (FR)

    Office of Energy Efficiency and Renewable Energy (EERE)

    CRAD for Facility Representatives (FR). Criteria Review and Approach Documents (CRADs) that can be used to conduct a well-organized and thorough assessment of elements of safety and health programs.

  18. TEC Working Group Member Organizations Representatives | Department...

    Office of Environmental Management (EM)

    Member Organizations Representatives TEC Working Group Member Organizations Representatives PDF icon TEC MEMBER ORGANIZATION REPRESENTATIVES TOPIC GROUP PARTICIPATION February 2006...

  19. Feed mechanism and method for feeding minute items

    DOE Patents [OSTI]

    Stringer, Timothy Kent; Yerganian, Simon Scott

    2012-11-06

    A feeding mechanism and method for feeding minute items, such as capacitors, resistors, or solder preforms. The mechanism is adapted to receive a plurality of the randomly-positioned and randomly-oriented extremely small or minute items, and to isolate, orient, and position the items in a specific repeatable pickup location wherefrom they may be removed for use by, for example, a computer-controlled automated assembly machine. The mechanism comprises a sliding shelf adapted to receive and support the items; a wiper arm adapted to achieve a single even layer of the items; and a pushing arm adapted to push the items into the pickup location. The mechanism can be adapted for providing the items with a more exact orientation, and can also be adapted for use in a liquid environment.

  20. Feed mechanism and method for feeding minute items

    DOE Patents [OSTI]

    Stringer, Timothy Kent; Yerganian, Simon Scott

    2009-10-20

    A feeding mechanism and method for feeding minute items, such as capacitors, resistors, or solder preforms. The mechanism is adapted to receive a plurality of the randomly-positioned and randomly-oriented extremely small or minute items, and to isolate, orient, and position one or more of the items in a specific repeatable pickup location wherefrom they may be removed for use by, for example, a computer-controlled automated assembly machine. The mechanism comprises a sliding shelf adapted to receive and support the items; a wiper arm adapted to achieve a single even layer of the items; and a pushing arm adapted to push the items into the pickup location. The mechanism can be adapted for providing the items with a more exact orientation, and can also be adapted for use in a liquid environment.

  1. Western Hemisphere Oil Products Balance

    U.S. Energy Information Administration (EIA) Indexed Site

    Western Hemisphere Oil Products Balance Ramn Espinasa, Ph.D. Lead Specialist July 2014 ... non-commercial purposes. 4 United States Oil Products Balance 5 Energy Matrix - USA 6 ...

  2. Doubles counting of highly multiplying items in reflective surroundings

    SciTech Connect (OSTI)

    Croft, Stephen; Evans, Louise G; Schear, Melissa A; Tobin, Stephen J

    2010-11-18

    When a neutrons are counted from a spontaneously fissile multiplying item in a reflecting environment the temporal behavior of the correlated signal following neutron birth is complex. At early times the signal is dominated by prompt fission events coming from spontaneous fission bursts and also from prompt fast-neutron induced fission events. At later times neutrons 'returning' from the surroundings induce fission and give rise to an additional chain of correlated events. The prompt and returning components probe the fissile and fertile constituents of the item in different ways and it is potentially beneficial to exploit this fact. In this work we look at how the two components can be represented using a linear combination of two simple functions. Fitting of the composite function to the capture time distribution represents one way of quantifying the proportion of each contribution. Another approach however is to use a dual shift register analysis where after each triggering event two coincidence gates are opened, one close to the trigger that responds preferentially to the prompt dynamics and one later in time which is more sensitive to the returning neutron induced events. To decide on the best gate positions and gate widths and also to estimate the counting precision we can use the analytical fit to work out the necessary gate utilization factors which are required in both these calculations. In this work, we develop the approach. Illustrative examples are given using spent Low Enriched Uranium (LEU) Pressurized light Water Reactor (LWR) fuel assemblies submersed in borated water and counted in a ring of {sup 3}He gas-filled proportional counters. In this case the prompt component is dominated by {sup 244}Cm spontaneous fission and induced fast neutron fission in for example {sup 238}U while the returning low energy neutrons induce fission mainly in the fissile nuclides such as {sup 239}Pu, {sup 241}Pu and {sup 235}U. One requirement is to calculate the Random

  3. Co2balance | Open Energy Information

    Open Energy Info (EERE)

    balance Jump to: navigation, search Name: Co2balance Place: United Kingdom Sector: Carbon Product: Carbon offset provider based in Somerset, UK. References: Co2balance1 This...

  4. Binary classification of items of interest in a repeatable process

    SciTech Connect (OSTI)

    Abell, Jeffrey A.; Spicer, John Patrick; Wincek, Michael Anthony; Wang, Hui; Chakraborty, Debejyo

    2014-06-24

    A system includes host and learning machines in electrical communication with sensors positioned with respect to an item of interest, e.g., a weld, and memory. The host executes instructions from memory to predict a binary quality status of the item. The learning machine receives signals from the sensor(s), identifies candidate features, and extracts features from the candidates that are more predictive of the binary quality status relative to other candidate features. The learning machine maps the extracted features to a dimensional space that includes most of the items from a passing binary class and excludes all or most of the items from a failing binary class. The host also compares the received signals for a subsequent item of interest to the dimensional space to thereby predict, in real time, the binary quality status of the subsequent item of interest.

  5. Safety Evaluation for Packaging (onsite) T Plant Canyon Items

    SciTech Connect (OSTI)

    OBRIEN, J.H.

    2000-07-14

    This safety evaluation for packaging (SEP) evaluates and documents the ability to safely ship mostly unique inventories of miscellaneous T Plant canyon waste items (T-P Items) encountered during the canyon deck clean off campaign. In addition, this SEP addresses contaminated items and material that may be shipped in a strong tight package (STP). The shipments meet the criteria for onsite shipments as specified by Fluor Hanford in HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments.

  6. Suspect/Counterfeit Items Awareness Training Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Suspect/Counterfeit Items Awareness Training Manual Suspect/Counterfeit Items Awareness Training Manual June 2007 The Suspect/Counterfeit Items Awareness Training manual provides information on individual components identified as suspect or counterfeit. The DOE Office of Environmental Protection, Sustainability Support & Corporate Safety Analysis has taken a corporate leadership role and is accountable for ensuring the effective implementation of the Department's S/CI process. The manual

  7. SF6432-CI (02-01-12) Commercial Items

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    who will enter a government site to perform Control : SF 6432-CI Title: Standard Terms and Conditions for Commercial Items Owner: Procurement Policy & Quality Dept Release...

  8. Dynamic load balancing of applications

    DOE Patents [OSTI]

    Wheat, Stephen R.

    1997-01-01

    An application-level method for dynamically maintaining global load balance on a parallel computer, particularly on massively parallel MIMD computers. Global load balancing is achieved by overlapping neighborhoods of processors, where each neighborhood performs local load balancing. The method supports a large class of finite element and finite difference based applications and provides an automatic element management system to which applications are easily integrated.

  9. Dynamic load balancing of applications

    DOE Patents [OSTI]

    Wheat, S.R.

    1997-05-13

    An application-level method for dynamically maintaining global load balance on a parallel computer, particularly on massively parallel MIMD computers is disclosed. Global load balancing is achieved by overlapping neighborhoods of processors, where each neighborhood performs local load balancing. The method supports a large class of finite element and finite difference based applications and provides an automatic element management system to which applications are easily integrated. 13 figs.

  10. Radar channel balancing with commutation

    SciTech Connect (OSTI)

    Doerry, Armin Walter

    2014-02-01

    When multiple channels are employed in a pulse-Doppler radar, achieving and maintaining balance between the channels is problematic. In some circumstances the channels may be commutated to achieve adequate balance. Commutation is the switching, trading, toggling, or multiplexing of the channels between signal paths. Commutation allows modulating the imbalance energy away from the balanced energy in Doppler, where it can be mitigated with filtering.

  11. ARM - Measurement - Surface energy balance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    energy balance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Surface energy balance The energy balance at the earth's surface between the net radiation and the sensible and latent heat fluxes and ground heat flux. Categories Surface Properties Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each

  12. Water-Balance Cover Performance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    show that the plantings control the soil water balance in the source area, preventing ... plantings with high nitrate water pumped from the alluvial aquifer, is also underway. ...

  13. Facility Representative Qualification Equivalencies Based on...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Facility Representative Qualification Equivalencies Based on Previous Experience Facility Representative Qualification Equivalencies Based on Previous Experience The referenced ...

  14. Par Pond water balance

    SciTech Connect (OSTI)

    Hiergesell, R.A.; Dixon, K.L.

    1996-06-01

    A water budget for the Par Pond hydrologic system was established in order to estimate the rate of groundwater influx to Par Pond. This estimate will be used in modeling exercises to predict Par Pond reservoir elevation and spillway discharge in the scenario where Savannah River water is no longer pumped and discharged into Par Pond. The principal of conservation of mass was used to develop the water budget, where water inflow was set equal to water outflow. Components of the water budget were identified, and the flux associated with each was determined. The water budget was considered balanced when inflow and outflow summed to zero. The results of this study suggest that Par Pond gains water from the groundwater system in the upper reaches of the reservoir, but looses water to the groundwater system near the dam. The rate of flux of groundwater from the water table aquifer into Par Pond was determined to be 13 cfs. The rate of flux from Par Pond to the water table aquifer near the dam was determined to be 7 cfs.

  15. Libra: Scalable Load Balance Analysis

    Energy Science and Technology Software Center (OSTI)

    2009-09-16

    Libra is a tool for scalable analysis of load balance data from all processes in a parallel application. Libra contains an instrumentation module that collects model data from parallel applications and a parallel compression mechanism that uses distributed wavelet transforms to gather load balance model data in a scalable fashion. Data is output to files, and these files can be viewed in a GUI tool by Libra users. The GUI tool associates particular load balancemore » data with regions for code, emabling users to view the load balance properties of distributed "slices" of their application code.« less

  16. AVOID BECOMING A VICTIM OF COUNTERFEIT ITEMS

    SciTech Connect (OSTI)

    WARRINER RD

    2011-07-13

    In today's globalized economy, we cannot live without imported products. Most people do not realize how thin the safety net of regulation and inspection really is. Less than three percent of imported products receive any form of government inspection prior to sale. Avoid flea markets, street vendors and deep discount stores. The sellers of counterfeit wares know where to market their products. They look for individuals who are hungry for a brand name item but do not want to pay a brand name price for it. The internet provides anonymity to the sellers of counterfeit products. Unlike Europe, U.S. law does not hold internet-marketing organizations, responsible for the quality of the products sold on their websites. These organizations will remove an individual vendor when a sufficient number of complaints are lodged, but they will not take responsibility for the counterfeit products you may have purchased. EBay has a number of counterfeit product guides to help you avoid being a victim of the sellers of these products. Ten percent of all medications taken worldwide are counterfeit. If you do buy medications on-line, be sure that the National Association of Boards of Pharmacy Verified Internet Pharmacy Practice Sites (VIPPS) recommends the pharmacy you choose to use. Inspect all medication purchases and report any change in color, shape, imprinting or odor to your pharmacist. If you take generic medications these attributes may change from one manufacturer to another. Your pharmacist should inform you of any changes when you refill your prescription. If they do not, get clarification prior to taking the medication. Please note that the Federal Drug Administration (FDA) does not regulate supplements. The FDA only steps in when a specific supplement proves to cause physical harm or contains a regulated ingredient. Due to counterfeiting, Underwriters Laboratories (UL) changed their label design three times since 1996. The new gold label should be attached to the cord or

  17. General Engineer/Physical Scientist (Facility Representative)

    Broader source: Energy.gov [DOE]

    A successful candidate in this position will serve as an on-site senior technical representative, and Facility Representative, with responsibility for evaluating contractor environmental, nuclear...

  18. Gathering total items count for pagination | OpenEI Community

    Open Energy Info (EERE)

    Gathering total items count for pagination Home > Groups > Utility Rate Hi I'm using the following base link plus some restrictions to sector, utility, and locations to poll for...

  19. Microsoft Word - foi 2013-00964.Item 3.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Each item of your request is re-stated below: 1. "Any and all records reflecting correspondence (including letters and emails) between the Department of Energy offices at Hanford ...

  20. SUMMARY OF FINAL RULES Item Subject FAR Case

    Broader source: Energy.gov (indexed) [DOE]

    SUMMARY OF FINAL RULES Item Subject FAR Case FAC 56-Miscellaneous I. Women-Owned Small Business Program 2010-015 II. Proper Use and Management of Cost-Reimbursement Contracts...

  1. Mechanically balanced tapered plug valve

    DOE Patents [OSTI]

    Anaya, Jose R.

    1985-01-01

    The invention is a novel hermetic tapered plug valve having a spring-like resilient mechanism for providing axial balance to the plug and thereby prevent valve lock up.

  2. Energy Balance Bowen Ratio System

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Energy Balance Bowen Ratio System Estimates of surface energy fluxes are a primary product of the data collection systems at the ARM SGP CART site. Surface fluxes tell ...

  3. LLNL line-item construction projects Master Site Plan

    SciTech Connect (OSTI)

    1996-04-15

    This interim submittal is an updated 1996 overview of the Master Plan based on the 1995 LLNL Site Development Plan, illustrating the future land use considerations, and the locations of proposed facilities as documented through the line item development process and keyed to the summary table. The following components in addition to the line-item proposals remain key elements in the implementation strategy of the Master Plan: personnel migration, revitalization, space reduction, classified core contraction, utility systems, and environmental restoration.

  4. Balanced Scorecard Performance Assessment Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1.3 May 2016 ______________________________________________________________________________ 1 Balanced Scorecard Performance Assessment Program [References: FAR Subpart 17.6, DEAR 970.0370-1, DEAR 970.4401-1, DEAR 970.4402-2] 1. Summary of Latest Changes This update revises the applicability of the Balanced Scorecard Program to DOE management and operating (M&O) contracts. Federal procurement offices are encouraged to continue their use of the BSC, however, The Critical Few Program has

  5. Material Balance Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Material Balance Report Material Balance Report Form supports nuclear material control and accountability. Material Balance Report (16.77 KB) More Documents & Publications DOE/NRC F 742 PHYSICAL INVENTORY LISTING DOE/NRC F 740M

  6. Suspect/Counterfeit Items Information Guide for Subcontractors/Suppliers

    SciTech Connect (OSTI)

    Tessmar, Nancy D.; Salazar, Michael J.

    2012-09-18

    Counterfeiting of industrial and commercial grade items is an international problem that places worker safety, program objectives, expensive equipment, and security at risk. In order to prevent the introduction of Suspect/Counterfeit Items (S/CI), this information sheet is being made available as a guide to assist in the implementation of S/CI awareness and controls, in conjunction with subcontractor's/supplier's quality assurance programs. When it comes to counterfeit goods, including industrial materials, items, and equipment, no market is immune. Some manufactures have been known to misrepresent their products and intentionally use inferior materials and processes to manufacture substandard items, whose properties can significantly cart from established standards and specifications. These substandard items termed by the Department of Energy (DOE) as S/CI, pose immediate and potential threats to the safety of DOE and contractor workers, the public, and the environment. Failure of certain systems and processes caused by an S/CI could also have national security implications at Los Alamos National Laboratory (LANL). Nuclear Safety Rules (federal Laws), DOE Orders, and other regulations set forth requirements for DOE contractors to implement effective controls to assure that items and services meet specified requirements. This includes techniques to implement and thereby minimizing the potential threat of entry of S/CI to LANL. As a qualified supplier of goods or services to the LANL, your company will be required to establish and maintain effective controls to prevent the introduction of S/CI to LANL. This will require that your company warrant that all items (including their subassemblies, components, and parts) sold to LANL are genuine (i.e. not counterfeit), new, and unused, and conform to the requirements of the LANL purchase orders/contracts unless otherwise approved in writing to the Los Alamos National Security (LANS) contract administrator

  7. World copper smelter sulfur balance-1988

    SciTech Connect (OSTI)

    Towle, S.W. )

    1993-01-01

    In 1989, the US Bureau of Mines initiated a contract to gather engineering, operating, and environmental cost data for 1988 for 30 major foreign primary copper smelters in market economy countries. Data were collected for 29 of the designated smelters together with information on applicable environmental regulations. Materials balance data obtained were used with available data for the eight US smelters to determine the approximate extent of copper smelter sulfur emission control in 1988. A broad characterization of the status of sulfur emission control regulation was made. The 37 US and foreign smelters represented roughly 73.2% of world and 89.3% of market economy primary copper production in 1988. The 29 non-US smelters attained 55.3% control of their input sulfur in 1988. Combined with the 90.4% control of US smelters, an aggregate 63.4% sulfur control existed. Roughly 1,951,100 mt of sulfur was emitted from the 37 market economy smelters in 1988. Identifiable SO[sub 2] control regulations covered 72.4% of the 29 foreign smelters, representing 65.5% of smelting capacity. Including US smelters, 78.4% of the major market economy smelters were regulated, representing 73.1% of smelting capacity. Significant changes since 1988 that may increase sulfur emission control are noted.

  8. Current balancing for battery strings

    DOE Patents [OSTI]

    Galloway, James H.

    1985-01-01

    A battery plant is described which features magnetic circuit means for balancing the electrical current flow through a pluraliircuitbattery strings which are connected electrically in parallel. The magnetic circuit means is associated with the battery strings such that the conductors carrying the electrical current flow through each of the battery strings pass through the magnetic circuit means in directions which cause the electromagnetic fields of at least one predetermined pair of the conductors to oppose each other. In an alternative embodiment, a low voltage converter is associated with each of the battery strings for balancing the electrical current flow through the battery strings.

  9. Burner balancing Salem Harbor Station

    SciTech Connect (OSTI)

    Sload, A.W.; Dube, R.J.

    1995-12-31

    The traditional method of burner balancing is first to determine the fuel distribution, then to measure the economizer outlet excess oxygen distribution and to adjust the burners accordingly. Fuel distribution is typically measured by clean and dirty air probing. Coal pipe flow can then be adjusted, if necessary, through the use of coal pipe orificing or by other means. Primary air flow must be adjusted to meet the design criteria of the burner. Once coal pipe flow is balanced to within the desired criteria, secondary air flow to individual burners can be changed by adjusting windbox dampers, burner registers, shrouds or other devices in the secondary air stream. This paper discusses problems encountered in measuring excess O{sub 2} at the economizer outlet. It is important to recognize that O{sub 2} measurements at the economizer outlet, by themselves, can be very misleading. If measurement problems are suspected or encountered, an alternate approach similar to that described should be considered. The alternate method is not only useful for burner balancing but also can be used to help in calibrating the plant excess O{sub 2} instruments and provide an on line means of cross-checking excess air measurements. Balanced burners operate closer to their design stoichiometry, providing better NO{sub x} reduction. For Salem Harbor Station, this means a significant saving in urea consumption.

  10. Dual shell pressure balanced vessel

    DOE Patents [OSTI]

    Fassbender, Alexander G.

    1992-01-01

    A dual-wall pressure balanced vessel for processing high viscosity slurries at high temperatures and pressures having an outer pressure vessel and an inner vessel with an annular space between the vessels pressurized at a pressure slightly less than or equivalent to the pressure within the inner vessel.

  11. Method using a density field for locating related items for data mining

    DOE Patents [OSTI]

    Wylie, Brian N.

    2002-01-01

    A method for locating related items in a geometric space transforms relationships among items to geometric locations. The method locates items in the geometric space so that the distance between items corresponds to the degree of relatedness. The method facilitates communication of the structure of the relationships among the items. The method makes use of numeric values as a measure of similarity between each pairing of items. The items are given initial coordinates in the space. An energy is then determined for each item from the item's distance and similarity to other items, and from the density of items assigned coordinates near the item. The distance and similarity component can act to draw items with high similarities close together, while the density component can act to force all items apart. If a terminal condition is not yet reached, then new coordinates can be determined for one or more items, and the energy determination repeated. The iteration can terminate, for example, when the total energy reaches a threshold, when each item's energy is below a threshold, after a certain amount of time or iterations.

  12. Authorizing Official Designated Representative (AODR) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Individual(s) in the AO Representative role must possess a working knowledge of: system function security policies technical security safeguards AODR Core Competency Training ...

  13. FAQS Reference Guide – Facility Representative

    Office of Energy Efficiency and Renewable Energy (EERE)

    This reference guide addresses the competency statements in the October 2010 edition of DOE-STD-1151-2010, Facility Representative Functional Area Qualification Standard.

  14. Balanced pressure gerotor fuel pump

    DOE Patents [OSTI]

    Raney, Michael Raymond; Maier, Eugen

    2004-08-03

    A gerotor pump for pressurizing gasoline fuel is capable of developing pressures up to 2.0 MPa with good mechanical and volumetric efficiency and satisfying the durability requirements for an automotive fuel pump. The pump has been designed with optimized clearances and by including features that promote the formation of lubricating films of pressurized fuel. Features of the improved pump include the use of a shadow port in the side plate opposite the outlet port to promote balancing of high fuel pressures on the opposite sides of the rotors. Inner and outer rotors have predetermined side clearances with the clearances of the outer rotor being greater than those of the inner rotor in order to promote fuel pressure balance on the sides of the outer rotor. Support of the inner rotor and a drive shaft on a single bushing with bearing sleeves maintains concentricity. Additional features are disclosed.

  15. Facility Representative of the Year Award

    Broader source: Energy.gov [DOE]

    The Facility Representative Award Program is a special award designed to recognize superior or exemplary service by a Facility Representative over a period of one year. This special award program has been established in accordance with the requirements of Department of Energy (DOE) Order 331.1C, Employee Performance Management and Recognition Program.

  16. Surface Energy Balance System (SEBS) Instrument Handbook

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    92 Surface Energy Balance System (SEBS) Instrument Handbook DR Cook January 2016 ... soilheatcapacity3 energystoragechange1 energystoragechange2 ...

  17. Binary classification of items of interest in a repeatable process

    DOE Patents [OSTI]

    Abell, Jeffrey A; Spicer, John Patrick; Wincek, Michael Anthony; Wang, Hui; Chakraborty, Debejyo

    2015-01-06

    A system includes host and learning machines. Each machine has a processor in electrical communication with at least one sensor. Instructions for predicting a binary quality status of an item of interest during a repeatable process are recorded in memory. The binary quality status includes passing and failing binary classes. The learning machine receives signals from the at least one sensor and identifies candidate features. Features are extracted from the candidate features, each more predictive of the binary quality status. The extracted features are mapped to a dimensional space having a number of dimensions proportional to the number of extracted features. The dimensional space includes most of the passing class and excludes at least 90 percent of the failing class. Received signals are compared to the boundaries of the recorded dimensional space to predict, in real time, the binary quality status of a subsequent item of interest.

  18. Balancing oil and environment... responsibly.

    SciTech Connect (OSTI)

    Weimer, Walter C.; Teske, Lisa

    2007-01-25

    Balancing Oil and Environment…Responsibly As the price of oil continues to skyrocket and global oil production nears the brink, pursuing unconventional oil supplies, such as oil shale, oil sands, heavy oils, and oils from biomass and coal has become increasingly attractive. Of particular significance to the American way is that our continent has significant quantities of these resources. Tapping into these new resources, however, requires cutting-edge technologies for identification, production, processing and environmental management. This job needs a super hero or two for a job of this size and proportion…

  19. Advisory Board Seats New Student Representatives

    Broader source: Energy.gov [DOE]

    The Oak Ridge Site Specific Advisory Board (ORSSAB) welcomed two new student representatives at its May meeting. Gracie Hall and Julia Riley will serve on the board through April 2014.

  20. Facility Representative Program, Criteria & Review Approach Documents

    Office of Energy Efficiency and Renewable Energy (EERE)

    This page provides Criteria Review and Approach Documents (CRADS) to assist Facility Representatives. Please submit your CRADS for posting by sending them to the HQ FR Program Manager. Please include the subject, date, and a contact person.

  1. Incentives for the Department's Facility Representative Program,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    12/17/1998 | Department of Energy Incentives for the Department's Facility Representative Program, 12/17/1998 Incentives for the Department's Facility Representative Program, 12/17/1998 The Department's Revised Implementation Plan for Defense Nuclear Facilities Safety Board Recommendation 93-3 has once again underscored the Department's commitment to maintaining the technical capability necessary to safely manage and operate our defense nuclear facilities. Attracting and retaining highly

  2. The United States Plutonium Balance, 1944-2009 | National Nuclear...

    National Nuclear Security Administration (NNSA)

    Pits The United States Plutonium Balance, 1944-2009 The United States Plutonium Balance, 1944-2009 The United States has released an inventory of its plutonium balances...

  3. Device for balancing parallel strings

    DOE Patents [OSTI]

    Mashikian, Matthew S.

    1985-01-01

    A battery plant is described which features magnetic circuit means in association with each of the battery strings in the battery plant for balancing the electrical current flow through the battery strings by equalizing the voltage across each of the battery strings. Each of the magnetic circuit means generally comprises means for sensing the electrical current flow through one of the battery strings, and a saturable reactor having a main winding connected electrically in series with the battery string, a bias winding connected to a source of alternating current and a control winding connected to a variable source of direct current controlled by the sensing means. Each of the battery strings is formed by a plurality of batteries connected electrically in series, and these battery strings are connected electrically in parallel across common bus conductors.

  4. EIA-930 Hourly and Daily Balancing ...

    U.S. Energy Information Administration (EIA) Indexed Site

    ... file retrieval using business-to-business data transfer or web services technology. ... but are to be included in the posted hourly value for balancing authority net generation. ...

  5. Balancing radar receiver channels with commutation. (Conference...

    Office of Scientific and Technical Information (OSTI)

    Title: Balancing radar receiver channels with commutation. Abstract not provided. Authors: Doerry, Armin Walter Publication Date: 2015-01-01 OSTI Identifier: 1244859 Report ...

  6. Control of Suspect/Counterfeit and Defective Items

    SciTech Connect (OSTI)

    Sheriff, Marnelle L.

    2013-09-03

    This procedure implements portions of the requirements of MSC-MP-599, Quality Assurance Program Description. It establishes the Mission Support Alliance (MSA) practices for minimizing the introduction of and identifying, documenting, dispositioning, reporting, controlling, and disposing of suspect/counterfeit and defective items (S/CIs). employees whose work scope relates to Safety Systems (i.e., Safety Class [SC] or Safety Significant [SS] items), non-safety systems and other applications (i.e., General Service [GS]) where engineering has determined that their use could result in a potential safety hazard. MSA implements an effective Quality Assurance (QA) Program providing a comprehensive network of controls and verification providing defense-in-depth by preventing the introduction of S/CIs through the design, procurement, construction, operation, maintenance, and modification of processes. This procedure focuses on those safety systems, and other systems, including critical load paths of lifting equipment, where the introduction of S/CIs would have the greatest potential for creating unsafe conditions.

  7. Apparatus and method for identification and recognition of an item with ultrasonic patterns from item subsurface micro-features

    DOE Patents [OSTI]

    Perkins, R.W.; Fuller, J.L.; Doctor, S.R.; Good, M.S.; Heasler, P.G.; Skorpik, J.R.; Hansen, N.H.

    1995-09-26

    The present invention is a means and method for identification and recognition of an item by ultrasonic imaging of material microfeatures and/or macrofeatures within the bulk volume of a material. The invention is based upon ultrasonic interrogation and imaging of material microfeatures within the body of material by accepting only reflected ultrasonic energy from a preselected plane or volume within the material. An initial interrogation produces an identification reference. Subsequent new scans are statistically compared to the identification reference for making a match/non-match decision. 15 figs.

  8. Apparatus and method for identification and recognition of an item with ultrasonic patterns from item subsurface micro-features

    DOE Patents [OSTI]

    Perkins, Richard W.; Fuller, James L.; Doctor, Steven R.; Good, Morris S.; Heasler, Patrick G.; Skorpik, James R.; Hansen, Norman H.

    1995-01-01

    The present invention is a means and method for identification and recognition of an item by ultrasonic imaging of material microfeatures and/or macrofeatures within the bulk volume of a material. The invention is based upon ultrasonic interrogation and imaging of material microfeatures within the body of material by accepting only reflected ultrasonic energy from a preselected plane or volume within the material. An initial interrogation produces an identification reference. Subsequent new scans are statistically compared to the identification reference for making a match/non-match decision.

  9. A Non-Destructive Investigation of Plutonium Reference Items Used for Calibration

    SciTech Connect (OSTI)

    Curtis, D.; Wormald, M.; Wilkins, C.G.; Croft, S.

    2008-07-01

    The calibration of Non-Destructive Assay (NDA) equipment relies on the availability of certified items of known content and construction. Increasing use is being made of calculational tools to create calibration data and so representative standards are no longer always needed. However, even with this approach it is invaluable to benchmark the tools against the measured response under well known conditions and to apply the Measured: Calculated ratio as a scaling factor. Reference sources for Pu are typically doubly encapsulated for safety reasons and contain Pu of well known chemical form, elemental composition, relative isotopic composition and mass. Destructive analysis techniques are used to characterize the materials and so these attributes are usually known with far greater accuracy than that achievable by the NDA methods to which they are being applied. Construction details are also usually provided in order to permit attenuation and related factors to be estimated. This work concerns the empirical investigation of a set of encapsulated PuO{sub 2} powder standards. The characterization and fabrication of the items is adequately documented with the exception of fill height. The fill height governs the powder density and in turn both the self attenuation of photons and the self multiplication of neutrons, consequently this is an important omission. Initially the location and dimensions of the internal plunger cup was used as a basis to estimate the packing density, but later records of plunger positions made at the time of filling were found and significant revisions followed. As a consequence of discrepancies observed in measurements designed to evaluate a new lump correction algorithm we were led to investigate the powder density and distribution directly by gamma-ray scanning. In some cases this resulted in revised density estimates. Equally importantly it was discovered that for the smallest mass items, the powder was not held fixed in the form of a uniform

  10. Data structures and apparatuses for representing knowledge

    DOE Patents [OSTI]

    Hohimer, Ryan E; Thomson, Judi R; Harvey, William J; Paulson, Patrick R; Whiting, Mark A; Tratz, Stephen C; Chappell, Alan R; Butner, Robert S

    2014-02-18

    Data structures and apparatuses to represent knowledge are disclosed. The processes can comprise labeling elements in a knowledge signature according to concepts in an ontology and populating the elements with confidence values. The data structures can comprise knowledge signatures stored on computer-readable media. The knowledge signatures comprise a matrix structure having elements labeled according to concepts in an ontology, wherein the value of the element represents a confidence that the concept is present in an information space. The apparatus can comprise a knowledge representation unit having at least one ontology stored on a computer-readable medium, at least one data-receiving device, and a processor configured to generate knowledge signatures by comparing datasets obtained by the data-receiving devices to the ontologies.

  11. PWR representative behavior during a LOCA

    SciTech Connect (OSTI)

    Allison, C.M.

    1981-01-01

    To date, there has been substantial analytical and experimental effort to define the margins between design basis loss-of-coolant accident (LOCA) behavior and regulatory limits on maximum fuel rod cladding temperature and deformation. As a result, there is extensive documentation on the modeling of fuel rod behavior in test reactors and design basis LOCA's. However, modeling of that behavior using representative, non-conservative, operating histories is not nearly as well documented in the public literature. Therefore, the objective of this paper is (a) to present calculations of LOCA induced behavior for Pressurized Water Reactor (PWR) core representative fuel rods, and (b) to discuss the variability in those calculations given the variability in fuel rod condition at the initiation of the LOCA. This analysis was limited to the study of changes in fuel rod behavior due to different power operating histories. The other two important parameters which affect that behavior, initial fuel rod design and LOCA coolant conditions were held invarient for all of the representative rods analyzed.

  12. Yucca Mountain Climate Technical Support Representative

    SciTech Connect (OSTI)

    Sharpe, Saxon E

    2007-10-23

    The primary objective of Project Activity ORD-FY04-012, “Yucca Mountain Climate Technical Support Representative,” was to provide the Office of Civilian Radioactive Waste Management (OCRWM) with expertise on past, present, and future climate scenarios and to support the technical elements of the Yucca Mountain Project (YMP) climate program. The Climate Technical Support Representative was to explain, defend, and interpret the YMP climate program to the various audiences during Site Recommendation and License Application. This technical support representative was to support DOE management in the preparation and review of documents, and to participate in comment response for the Final Environmental Impact Statement, the Site Recommendation Hearings, the NRC Sufficiency Comments, and other forums as designated by DOE management. Because the activity was terminated 12 months early and experience a 27% reduction in budget, it was not possible to complete all components of the tasks as originally envisioned. Activities not completed include the qualification of climate datasets and the production of a qualified technical report. The following final report is an unqualified summary of the activities that were completed given the reduced time and funding.

  13. Representing the vacuum polarization on de Sitter

    SciTech Connect (OSTI)

    Leonard, Katie E.; Woodard, Richard P.; Prokopec, Tomislav

    2013-03-15

    Previous studies of the vacuum polarization on de Sitter have demonstrated that there is a simple, noncovariant representation of it in which the physics is transparent. There is also a cumbersome, covariant representation in which the physics is obscure. Despite being unwieldy, the latter form has a powerful appeal for those who are concerned about de Sitter invariance. We show that nothing is lost by employing the simple, noncovariant representation because there is a closed form procedure for converting its structure functions to those of the covariant representation. We also present a vastly improved technique for reading off the noncovariant structure functions from the primitive diagrams. And we discuss the issue of representing the vacuum polarization for a general metric background.

  14. Surface Energy Balance System (SEBS) Handbook

    SciTech Connect (OSTI)

    Cook, DR

    2011-02-14

    A Surface Energy Balance System (SEBS) has been installed collocated with each deployed ECOR system at the Southern Great Plains (SGP), North Slope of Alaska (NSA), Tropical Western Pacific (TWP), ARM Mobile Facility 1 (AMF1), and ARM Mobile Facility 2 (AMF2). The surface energy balance system consists of upwelling and downwelling solar and infrared radiometers within one net radiometer, a wetness sensor, and soil measurements. The SEBS measurements allow the comparison of ECOR sensible and latent heat fluxes with the energy balance determined from the SEBS and provide information on wetting of the sensors for data quality purposes.

  15. NQA-1 Requirements for Commercial Grade Item Acceptance: ICONE20-54738

    SciTech Connect (OSTI)

    Van Valkenburg, Taunia S.; Holmes, Richard A.; Tepley, Daniel J.; Sandquist, Gary

    2012-07-19

    Objectives are: (1) Present the DOE Chemistry and Metallurgy Research Replacement (CMRR) Project Commercial Grade Item (CGI) Dedication Process; and (2) Present CMRR Project CGI Lessons-Learned.

  16. Meeting Action Items and Highlights from the Bio-Derived Liquids...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reforming Working Group (BILIWG) & Hydrogen Production Technical Team Research Review Meeting Action Items and Highlights from the Bio-Derived Liquids to Hydrogen Distributed ...

  17. Balance Calibration A Method for Assigning a Direct-Reading Uncertainty to an Electronic Balance.

    SciTech Connect (OSTI)

    Mike Stears

    2010-07-01

    Paper Title: Balance Calibration A method for assigning a direct-reading uncertainty to an electronic balance. Intended Audience: Those who calibrate or use electronic balances. Abstract: As a calibration facility, we provide on-site (at the customers location) calibrations of electronic balances for customers within our company. In our experience, most of our customers are not using their balance as a comparator, but simply putting an unknown quantity on the balance and reading the displayed mass value. Manufacturers specifications for balances typically include specifications such as readability, repeatability, linearity, and sensitivity temperature drift, but what does this all mean when the balance user simply reads the displayed mass value and accepts the reading as the true value? This paper discusses a method for assigning a direct-reading uncertainty to a balance based upon the observed calibration data and the environment where the balance is being used. The method requires input from the customer regarding the environment where the balance is used and encourages discussion with the customer regarding sources of uncertainty and possible means for improvement; the calibration process becomes an educational opportunity for the balance user as well as calibration personnel. This paper will cover the uncertainty analysis applied to the calibration weights used for the field calibration of balances; the uncertainty is calculated over the range of environmental conditions typically encountered in the field and the resulting range of air density. The temperature stability in the area of the balance is discussed with the customer and the temperature range over which the balance calibration is valid is decided upon; the decision is based upon the uncertainty needs of the customer and the desired rigor in monitoring by the customer. Once the environmental limitations are decided, the calibration is performed and the measurement data is entered into a custom

  18. Work and Life Balance | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Balancing Work with Life Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on ...

  19. Extreme Balance of System Hardware Cost Reduction

    Broader source: Energy.gov [DOE]

    On September 1, 2011, DOE announced $42.4 million in funding over three years for the Extreme Balance of System Hardware Cost Reduction (BOS-X) funding opportunity. Part of the SunShot Systems...

  20. Background-free balanced optical cross correlator

    SciTech Connect (OSTI)

    Nejadmalayeri, Amir Hossein; Kaertner, Franz X

    2014-12-23

    A balanced optical cross correlator includes an optical waveguide, a first photodiode including a first n-type semiconductor and a first p-type semiconductor positioned about the optical waveguide on a first side of the optical waveguide's point of symmetry, and a second photodiode including a second n-type semiconductor and a second p-type semiconductor positioned about the optical waveguide on a second side of the optical waveguide's point of symmetry. A balanced receiver including first and second inputs is configured to produce an output current or voltage that reflects a difference in currents or voltages, originating from the first and the second photodiodes of the balanced cross correlator and fed to the first input and to the second input of the balanced receiver.

  1. Annual Uncosted Balances Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Annual Uncosted Balances Reports Annual Uncosted Balances Reports Section 2307 of the Energy Policy Act of 1992 (42 U.S.C. 13526) requires the Department of Energy (Department or DOE) to submit an annual report to Congress on the state of the Department's uncosted obligations. The section requires the report to identify the uncosted obligations at the end of the previous fiscal year (FY), describe the purpose of those funds, and describe the effect the information had on the annual budget

  2. Balanced Scorecard Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Balanced Scorecard Program Balanced Scorecard Program I. Introduction The BSC is a conceptual framework for translating an organization's vision into a set of performance indicators distributed among four perspectives: Financial, Customer, Internal Business Processes, and Learning and Growth. Indicators are maintained to measure an organization's progress toward achieving its vision; other indicators are maintained to measure the long term drivers of success. Through the BSC, an organization

  3. Testing of a low-cost item monitoring system

    SciTech Connect (OSTI)

    Frank, D.J.; Cunningham, K.R.; Hoover, C.E.; Trujillo, A.A.

    1988-01-01

    Material control is an important element of any security system which seeks to address the insider threat. Sandia has developed Wireless Alarm Transmission of Container Handling (WATCH) which is a remote sensor system that provides a low-cost, convenient way of monitoring item movement. Rockwell International/Rocky Flats Plant (RFP) and Sandia have conducted a long-term evaluation of the WATCH system in an operating production facility. Testing was conducted in a large scale, remote access storage vault for Special Nuclear Materials (SNM). A total of fourteen WATCH units were placed on storage containers in the vault. A schedule was established which provided prearranged movement of monitored containers on a regular basis. The test objectives were to determine (1) the feasibility of using the WATCH system technology to implement material control concepts, (2) the system performance in an active production area, and high radiation environment, (3) the sensitivity settings required for optimum system performance, and (4) the spatial resolution of the transmitter/receiver utilized.

  4. Testing of a low-cost item monitoring system

    SciTech Connect (OSTI)

    Frank, D.J.; Cunningham, K.R.; Hoover, C.E.; Trujillo, A.A.

    1988-01-01

    Material control is an important element of any security system which seeks to address the insider threat. Sandia has developed Wireless Alarm Transmission of Container Handling (WATCH) which is a remote sensory system that provides a low-cost, convenient way of monitoring item movement. Rockwell International/Rocky Flats Plant (RFP) and Sandia have conducted a long-term evaluation of the WATCH system in an operating production facility. Testing was conducted in a large scale, remote access storage vault for Special Nuclear Materials (SNM). A total of fourteen WATCH units were placed on storage containers in the vault. A schedule was established which provided prearranged movement of monitored containers on a regular basis. The test objectives were to determine 1) the feasibility of using the WATCH system technology to implement material control concepts, 2) the system performance in an active production area, and high radiation environment, 3) the sensitivity settings required for optimum system performance, and 4) the spatial resolution of the transmitter/receiver utilized.

  5. 1998 Annual Facility Representative Workshop Attendees | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 998 Annual Facility Representative Workshop Attendees 1998 Annual Facility Representative Workshop Attendees 1998 Annual Facility Representative Workshop Attendees 1998 Annual Facility Representative Workshop Attendees (82.87 KB) More Documents & Publications 1999 Annual Facility Representative Workshop Attendees FTCP Members DOE Integrated Safety Management Champions List

  6. An evaluation of spindle-shaft seizure accident sequences for the Schenck Dynamic Balancer

    SciTech Connect (OSTI)

    Bott, T.F.; Fischer, S.R.

    1998-11-01

    This study was conducted at the request of the USDOE/AL Dynamic Balancer Project Team to develop a set of representative accident sequences initiated by rapid seizure of the spindle shaft of the Schenck dynamic balancing machine used in the mass properties testing activities in Bay 12-60 at the Pantex Plant. This Balancer is used for balancing reentry vehicles. In addition, the study identified potential causes of possible spindle-shaft seizure leading to a rapid deceleration of the rotating assembly. These accident sequences extend to the point that the reentry vehicle either remains in stable condition on the balancing machine or leaves the machine with some translational and rotational motion. Fault-tree analysis was used to identify possible causes of spindle-shaft seizure, and failure modes and effects analysis identified the results of shearing of different machine components. Cause-consequence diagrams were used to help develop accident sequences resulting from the possible effects of spindle-shaft seizure. To make these accident sequences physically reasonable, the analysts used idealized models of the dynamics of rotating masses. Idealized physical modeling also was used to provide approximate values of accident parameters that lead to branching down different accident progression paths. The exacerbating conditions of balancing machine over-speed and improper assembly of the fixture to the face plate are also addressed.

  7. Microsoft Word - Energy balancing rate settlement signals commitment...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    defines charges for balancing services, or generation inputs, that maintain a constant balance of the energy produced and energy consumed. "BPA and the parties involved in this...

  8. Acquisition Guide Chapter 1.2 - Balanced Scorecard Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 - Balanced Scorecard Performance Assessment Program - (March 2004) Acquisition Guide Chapter 1.2 - Balanced Scorecard Performance Assessment Program - (March 2004) This chapter ...

  9. IN OTHER CATEGORIES; MACHINERY; MASS BALANCE; MECHANICAL VIBRATIONS...

    Office of Scientific and Technical Information (OSTI)

    world Bracher, B. 42 ENGINEERING NOT INCLUDED IN OTHER CATEGORIES; MACHINERY; MASS BALANCE; MECHANICAL VIBRATIONS; MAINTENANCE; REPAIR Field balancing can achieve significant...

  10. Smart Meters Help Balance Energy Consumption at Solar Decathlon...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Smart Meters Help Balance Energy Consumption at Solar Decathlon Smart Meters Help Balance Energy Consumption at Solar Decathlon September 28, 2011 - 10:57am Addthis The Team...

  11. Beginning Foreign Obligation Balances for the Power Reactors...

    National Nuclear Security Administration (NNSA)

    Beginning Foreign Obligation Balances Beginning Foreign Obligation Balances for the Power Reactors for the Power Reactors Michael J. Smith Michael J. Smith NAC International NAC ...

  12. A Framework for Load Balancing of Tensor Contraction Expressions via Dynamic Task Partitioning

    SciTech Connect (OSTI)

    Lai, Pai-Wei; Stock, Kevin; Rajbhandari, Samyam; Krishnamoorthy, Sriram; Sadayappan, Ponnuswamy

    2013-11-17

    In this paper, we introduce the Dynamic Load-balanced Tensor Contractions (DLTC), a domain-specific library for efficient task parallel execution of tensor contraction expressions, a class of computation encountered in quantum chemistry and physics. Our framework decomposes each contraction into smaller unit of tasks, represented by an abstraction referred to as iterators. We exploit an extra level of parallelism by having tasks across independent contractions executed concurrently through a dynamic load balancing run- time. We demonstrate the improved performance, scalability, and flexibility for the computation of tensor contraction expressions on parallel computers using examples from coupled cluster methods.

  13. 3Q CY2005 (PDF), Facility Representative Program Performance...

    Office of Environmental Management (EM)

    3Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report 3Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report...

  14. Representativeness-based Sampling Network Design for the State...

    Office of Scientific and Technical Information (OSTI)

    Representativeness-based Sampling Network Design for the State of Alaska Citation Details In-Document Search Title: Representativeness-based Sampling Network Design for the State...

  15. Representativeness-Based Sampling Network Design for the State...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Representativeness-Based Sampling Network Design for the State of Alaska Citation Details In-Document Search Title: Representativeness-Based Sampling Network...

  16. W&M Student Elected to Represent American Physical Society's...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    W&M Student Elected to Represent American Physical Society's Graduate Student Forum W&M Student Elected to Represent American Physical Society's Graduate Student Forum V Gray ...

  17. 4Q CY2000 (PDF), Facility Representative Program Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report 4Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report ...

  18. OXALATE MASS BALANCE DURING CHEMICAL CLEANING IN TANK 6F

    SciTech Connect (OSTI)

    Poirier, M.; Fink, S.

    2011-07-22

    The Savannah River Remediation (SRR) is preparing Tank 6F for closure. The first step in preparing the tank for closure is mechanical sludge removal. Following mechanical sludge removal, SRS performed chemical cleaning with oxalic acid to remove the sludge heel. Personnel are currently assessing the effectiveness of the chemical cleaning to determine whether the tank is ready for closure. SRR personnel collected liquid samples during chemical cleaning and submitted them to Savannah River National Laboratory (SRNL) for analysis. Following chemical cleaning, they collected a solid sample (also known as 'process sample') and submitted it to SRNL for analysis. The authors analyzed these samples to assess the effectiveness of the chemical cleaning process. Analysis of the anions showed the measured oxalate removed from Tank 6F to be approximately 50% of the amount added in the oxalic acid. To close the oxalate mass balance, the author collected solid samples, leached them with nitric acid, and measured the concentration of cations and anions in the leachate. Some conclusions from this work are: (1) Approximately 65% of the oxalate added as oxalic acid was removed with the decanted liquid. (2) Approximately 1% of the oxalate (added to the tank as oxalic acid) formed precipitates with compounds such as nickel, manganese, sodium, and iron (II), and was dissolved with nitric acid. (3) As much as 30% of the oxalate may have decomposed forming carbon dioxide. The balance does not fully account for all the oxalate added. The offset represents the combined uncertainty in the analyses and sampling.

  19. Trends and balances: 1985-1990

    SciTech Connect (OSTI)

    Not Available

    1985-01-01

    This is the seventh edition of Trends and Balances to be presented to the staff of Oak Ridge National (ORNL) and other interested parties. Each year at the end of the planning cycle the Laboratory publishes its official planning document, the Institutional Plan. Trends and Balances is brought out as a condensation of that more formal document and is intended to provide a reference to the kinds of plans that have occupied senior laboratory management over the past year. An institution as large as ORNL changes slowly, so some of the information in this document overlaps that contained in the previous edition of Trends and Balances. Much, however, is different. A new section, for example, describes what senior Laboratory management feels are five new directions for science and technology at ORNL. This document is intended to provide new insights into the programs and structure of the Laboratory.

  20. Advisory Board Seats New Student Representative | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Seats New Student Representative Advisory Board Seats New Student Representative May 26, 2016 - 8:19am Addthis New student representative Lara Manning joins ORSSAB for 2016-2017. New student representative Lara Manning joins ORSSAB for 2016-2017. The Oak Ridge Site Specific Advisory Board (ORSSAB) welcomed a new student representative at its monthly meeting. Lara Manning will serve on the board for a one-year term through April 2017. ORSSAB is a federally chartered citizens' panel that provides

  1. Greener Commercial A/C Units Becoming a Cool Item | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Greener Commercial A/C Units Becoming a Cool Item Greener Commercial A/C Units Becoming a Cool Item July 1, 2010 - 5:11pm Addthis Greener Commercial A/C Units Becoming a Cool Item Stephen Graff Former Writer & editor for Energy Empowers, EERE A new federal tax credit is helping McQuay International expand its line of energy-efficient HVAC products at two of its plants and bring back furloughed workers. With the help of a 48C manufacturing tax credit worth $2 million under the American

  2. FY 2013 Annual Uncosted Balances Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Annual Uncosted Balances Reports » FY 2013 Annual Uncosted Balances Report FY 2013 Annual Uncosted Balances Report This report presents the results of the Department's annual analysis of uncosted balances for FY 2013. In FY 2009, the American Recovery and Reinvestment Act of 2009 (Recovery Act) provided the Department an additional $36.7 billion of funding. The FY 2013 uncosted balances associated with Recovery Act funding are separately presented but are not included in the additional analysis

  3. FY 2012 Annual Uncosted Balances Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Annual Uncosted Balances Reports » FY 2012 Annual Uncosted Balances Report FY 2012 Annual Uncosted Balances Report This report presents the results of the Department's annual analysis of uncosted balances for FY 2012. In FY 2009, the American Recovery and Reinvestment Act of 2009 (Recovery Act) provided the Department an additional $36.7 billion of funding. The FY 2012 uncosted balances associated with Recovery Act funding are separately presented but are not included in the additional analysis

  4. FY 2014 Annual Uncosted Balances Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Uncosted Balances Reports » FY 2014 Annual Uncosted Balances Report FY 2014 Annual Uncosted Balances Report This report presents the results of the Department's annual analysis of uncosted balances for FY 2014. In FY 2009, the American Recovery and Reinvestment Act of 2009 (Recovery Act) provided the Department an additional $36.7 billion of funding. The FY 2014 uncosted balances associated with Recovery Act funding are separately presented but are not included in the additional analysis of

  5. Energy balance of ENDF/B-VI

    SciTech Connect (OSTI)

    MacFarlane, R.E.

    1994-06-01

    ENDF/B-VI through Release 2 has been tested for neutron-photon energy balance using the Heater module of the NJOY nuclear data procesing system. The situation is much improved over ENDF/B-V, but there are still a number of maerials that show problems.

  6. Torque-balanced vibrationless rotary coupling

    DOE Patents [OSTI]

    Miller, Donald M. (Sunnyside, WA)

    1980-01-01

    This disclosure describes a torque-balanced vibrationless rotary coupling for transmitting rotary motion without unwanted vibration into the spindle of a machine tool. A drive member drives a driven member using flexible connecting loops which are connected tangentially and at diametrically opposite connecting points through a free floating ring.

  7. Wind Integration Program: Balancing the Future

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wind Integration Program: Balancing the Future Initial Discussions 3072012 2 B O N N E V I L L E P O W E R A D M I N I S T R A T I O N Background BPA has implemented a number...

  8. An unconventional method for load balancing

    SciTech Connect (OSTI)

    Deng, Y.; McCoy, R.A.; Marr, R.B.

    1995-12-01

    A new method of load balancing is introduced based on the idea of dynamically relocating virtual processes corresponding to computations on an abstract system with a larger number of processors. The algorithm introduced preserves the locality of nearest neighbor interactions and has been tested on simulated data and a molecular dynamics code.

  9. An unconventional method for load balancing

    SciTech Connect (OSTI)

    Deng, Y.; McCoy, R.A.; Marr, R.B.; Peierls, R.F.

    1995-08-01

    A new method of load balancing is introduced based on the idea of dynamically relocating virtual processes corresponding to computations on an abstract system with a large number of processors. The algorithm introduced preserves the locality of nearest neighbor interactions and has been tested on simulated data and a molecular dynamics code.

  10. Approach to IAEA material-balance verification at the Portsmouth Gas Centrifuge Enrichment Plant

    SciTech Connect (OSTI)

    Gordon, D.M.; Sanborn, J.B.; Younkin, J.M.; DeVito, V.J.

    1983-01-01

    This paper describes a potential approach by which the International Atomic Energy Agency (IAEA) might verify the nuclear-material balance at the Portsmouth Gas Centrifuge Enrichment Plant (GCEP). The strategy makes use of the attributes and variables measurement verification approach, whereby the IAEA would perform independent measurements on a randomly selected subset of the items comprising the U-235 flows and inventories at the plant. In addition, the MUF-D statistic is used as the test statistic for the detection of diversion. The paper includes descriptions of the potential verification activities, as well as calculations of: (1) attributes and variables sample sizes for the various strata, (2) standard deviations of the relevant test statistics, and (3) the detection sensitivity which the IAEA might achieve by this verification strategy at GCEP.

  11. Techniques for reducing error in the calorimetric measurement of low wattage items

    SciTech Connect (OSTI)

    Sedlacek, W.A.; Hildner, S.S.; Camp, K.L.; Cremers, T.L.

    1993-08-01

    The increased need for the measurement of low wattage items with production calorimeters has required the development of techniques to maximize the precision and accuracy of the calorimeter measurements. An error model for calorimetry measurements is presented. This model is used as a basis for optimizing calorimetry measurements through baseline interpolation. The method was applied to the heat measurement of over 100 items and the results compared to chemistry assay and mass spectroscopy.

  12. Meeting Action Items and Highlights from the Bio-Derived Liquids to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Distributed Reforming Working Group (BILIWG) & Hydrogen Production Technical Team Research Review | Department of Energy Action Items and Highlights from the Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group (BILIWG) & Hydrogen Production Technical Team Research Review Meeting Action Items and Highlights from the Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group (BILIWG) & Hydrogen Production Technical Team Research Review This is the

  13. 1999 FACILITY REPRESENTATIVE CONFERENCE June 21 – 25, 1999

    Broader source: Energy.gov [DOE]

    The Department of Energy will host the Facility Representative Annual Meeting on June 21-25, 1999 at the Alexis Park Hotel in Las Vegas, Nevada. The meeting will give Facility Representatives and...

  14. FACILITY REPRESENTATIVE PROGRAM STATUS, 6/21/1999

    Broader source: Energy.gov [DOE]

    Since September, 1993, the Office of Field Management has served as the Department’s corporate advocate for the Facility Representative Program. The Facility Representative (FR) is a critical...

  15. Percent of Industrial Natural Gas Deliveries in New Mexico Represented...

    U.S. Energy Information Administration (EIA) Indexed Site

    Mexico Represented by the Price (Percent) Percent of Industrial Natural Gas Deliveries in New Mexico Represented by the Price (Percent) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct ...

  16. Office of Departmental Representative to DNFSB | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Departmental Representative to DNFSB Office of Departmental Representative to DNFSB Mission The Department Representative to the Defense Nuclear Facilities Safety Board (DNFSB) provides effective cross-organizational leadership in resolving DNFSB-related technical and management issues necessary to ensure public health and safety. Functions Represents the Secretary and the Associate Deputy Secretary in regular and continuing interactions with the DNFSB(and/or also referred to as Board). Advises

  17. 1Q CY2000 (PDF), Facility Representative Program Performance Indicators

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quarterly Report | Department of Energy Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report 1Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report "The Facility Representative Program Performance Indicators (PIs) Quarterly Report is attached, covering the period from January 2000 to March 2000. Data for these indicators are gathered by the Field elements quarterly per the Facility Representatives Standard, DOE-STD-1

  18. Surface Energy Balance System (SEBS) Handbook

    SciTech Connect (OSTI)

    Cook, D. R.

    2016-01-01

    A Surface Energy Balance System (SEBS) has been installed collocated with each deployed Eddy Correlation Flux Measurement System (ECOR) at the Atmospheric Radiation Measurement (ARM) Climate Research Facility’s Southern Great Plains (SGP) site, North Slope of Alaska (NSA) site, first ARM Mobile Facility (AMF1), second ARM Mobile Facility (AMF2), and third ARM Mobile Facility (AMF3) at Oliktok Point (OLI). A SEBS was also deployed with the Tropical Western Pacific (TWP) site, before it was decommissioned. Data from these sites, including the retired TWP, are available in the ARM Data Archive. The SEBS consists of upwelling and downwelling solar and infrared radiometers within one net radiometer, a wetness sensor, and soil measurements. The SEBS measurements allow the comparison of ECOR sensible and latent heat fluxes with the energy balance determined from the SEBS and provide information on wetting of the sensors for data quality purposes.

  19. Isorropia Partitioning and Load Balancing Package

    Energy Science and Technology Software Center (OSTI)

    2006-09-01

    Isorropia is a partitioning and load balancing package which interfaces with the Zoltan library. Isorropia can accept input objects such as matrices and matrix-graphs, and repartition/redistribute them into a better data distribution on parallel computers. Isorropia is primarily an interface package, utilizing graph and hypergraph partitioning algorithms that are in the Zoltan library which is a third-party library to Tilinos.

  20. Balanced pressure techniques applied to geothermal drilling

    SciTech Connect (OSTI)

    Dareing, D.W.

    1981-08-01

    The objective of the study is to evaluate balanced pressure drilling techniques for use in combating lost circulation in geothermal drilling. Drilling techniques evaluated are: aerated drilling mud, parasite tubing, concentric drill pipe, jet sub, and low density fluids. Based on the present state of the art of balanced pressure drilling techniques, drilling with aerated water has the best overall balance of performance, risk, availability, and cost. Aerated water with a 19:1 free air/water ratio reduce maximum pressure unbalance between wellbore and formation pressures from 1000 psi to 50 psi. This pressure unbalance is within acceptable operating limits; however, air pockets could form and cause pressure surges in the mud system due to high percent of air. Low density fluids used with parasite tubing has the greatest potential for combating lost circulation in geothermal drilling, when performance only is considered. The top portion of the hole would be aerated through the parasite tube at a 10:1 free air/mud ratio and the low density mud could be designed so that its pressure gradient exactly matches the formation pore pressure gradient. The main problem with this system at present is the high cost of ceramic beads needed to produce low density muds.

  1. Balancing Hydronic Systems in Multifamily Buildings

    SciTech Connect (OSTI)

    Ruch, R.; Ludwig, P.; Maurer, T.

    2014-07-01

    In multifamily hydronic systems, temperature imbalance may be caused by undersized piping, improperly adjusted balancing valves, inefficient water temperature and flow levels, and owner/occupant interaction with the boilers, distribution and controls. The effects of imbalance include tenant discomfort, higher energy use intensity and inefficient building operation. This paper explores cost-effective distribution upgrades and balancing measures in multifamily hydronic systems, providing a resource to contractors, auditors, and building owners on best practices to improve tenant comfort and lower operating costs. The research was conducted by The Partnership for Advanced Residential Retrofit (PARR) in conjunction with Elevate Energy. The team surveyed existing knowledge on cost-effective retrofits for optimizing distribution in typical multifamily hydronic systems, with the aim of identifying common situations and solutions, and then conducted case studies on two Chicago area buildings with known balancing issues in order to quantify the extent of temperature imbalance. At one of these buildings a booster pump was installed on a loop to an underheated wing of the building. This study found that unit temperature in a multifamily hydronic building can vary as much as 61 degrees F, particularly if windows are opened or tenants use intermittent supplemental heating sources like oven ranges. Average temperature spread at the building as a result of this retrofit decreased from 22.1 degrees F to 15.5 degrees F.

  2. Balancing Hydronic Systems in Multifamily Buildings

    SciTech Connect (OSTI)

    Ruch, Russell; Ludwig, Peter; Maurer, Tessa

    2014-07-01

    In multifamily hydronic systems, temperature imbalance may be caused by undersized piping, improperly adjusted balancing valves, inefficient water temperature and flow levels, and owner/occupant interaction with the boilers, distribution, and controls. The imbalance leads to tenant discomfort, higher energy use intensity, and inefficient building operation. This research, conducted by Building America team Partnership for Advanced Residential Retrofit, explores cost-effective distribution upgrades and balancing measures in multifamily hydronic systems, providing a resource to contractors, auditors, and building owners on best practices to improve tenant comfort and lower operating costs. The team surveyed existing knowledge on cost-effective retrofits for optimizing distribution in typical multifamily hydronic systems, with the aim of identifying common situations and solutions, and then conducted case studies on two Chicago area buildings with known balancing issues in order to quantify the extent of temperature imbalance. At one of these buildings a booster pump was installed on a loop to an underheated wing of the building. This study found that unit temperature in a multifamily hydronic building can vary as much as 61°F, particularly if windows are opened or tenants use intermittent supplemental heating sources like oven ranges. Average temperature spread at the building as a result of this retrofit decreased from 22.1°F to 15.5°F.

  3. TRANSFORMER FOR JOINING UNBALANCED TO BALANCED TRANSMISSION MEANS

    DOE Patents [OSTI]

    Bittner, B.J.; Opperman, R.H.

    1960-06-28

    An improved transformer is invented for joining an unbalanced transmission means to a balanced transmission means and is useful, for example, in transmitting an electromagnetic signal from a coaxial cable to a balanced dipole antenna.

  4. Building America Technology Solutions for New and Existing Homes: Balancing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydronic Systems in Multifamily Buildings, Chicago, Illinois (Fact Sheet) | Department of Energy Balancing Hydronic Systems in Multifamily Buildings, Chicago, Illinois (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Balancing Hydronic Systems in Multifamily Buildings, Chicago, Illinois (Fact Sheet) In multifamily building hydronic systems, temperature imbalance may be caused by undersized piping, improperly adjusted balancing valves, inefficient water

  5. Facility Representative, Technical Area (TA-55) Plutonium Facility, Los

    National Nuclear Security Administration (NNSA)

    Alamos Site Office | National Nuclear Security Administration | (NNSA) Facility Representative, Technical Area (TA-55) Plutonium Facility, Los Alamos Site Office John Krepps John Krepps June 2010 U.S. Department of Energy Facility Representative of the Year John Krepps, a facility representative for the National Nuclear Security Administration's (NNSA) Los Alamos Site Office, received the Department of Energy's top award for oversight of nuclear and non-nuclear facilities. Krepps, a Los

  6. CNS represented at inaugural Energetics Consortium | Y-12 National Security

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Complex represented at ... CNS represented at inaugural Energetics Consortium Posted: February 16, 2016 - 6:53pm CNS was well represented at the first National Energetic Materials Consortium. About 70 university researchers and government and industry experts from across the country, including Consolidated Nuclear Security employees, joined forces at the first ever National Energetic Materials Consortium hosted by Texas Tech University. Pantex's Christopher Young said, "There are a

  7. Departmental Representative to the Defense Nuclear Facilities Safety Board

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (DNFSB) | Department of Energy Departmental Representative to the Defense Nuclear Facilities Safety Board (DNFSB) Departmental Representative to the Defense Nuclear Facilities Safety Board (DNFSB) The Office of the Departmental Representative ensures effective cross-organizational leadership and coordination to resolve DNFSB-identified technical and management issues as we work to ensure the health, safety, and security of the workers, public, and environment. This web site is an important

  8. Voltage balanced multilevel voltage source converter system

    DOE Patents [OSTI]

    Peng, F.Z.; Lai, J.S.

    1997-07-01

    Disclosed is a voltage balanced multilevel converter for high power AC applications such as adjustable speed motor drives and back-to-back DC intertie of adjacent power systems. This converter provides a multilevel rectifier, a multilevel inverter, and a DC link between the rectifier and the inverter allowing voltage balancing between each of the voltage levels within the multilevel converter. The rectifier is equipped with at least one phase leg and a source input node for each of the phases. The rectifier is further equipped with a plurality of rectifier DC output nodes. The inverter is equipped with at least one phase leg and a load output node for each of the phases. The inverter is further equipped with a plurality of inverter DC input nodes. The DC link is equipped with a plurality of rectifier charging means and a plurality of inverter discharging means. The plurality of rectifier charging means are connected in series with one of the rectifier charging means disposed between and connected in an operable relationship with each adjacent pair of rectifier DC output nodes. The plurality of inverter discharging means are connected in series with one of the inverter discharging means disposed between and connected in an operable relationship with each adjacent pair of inverter DC input nodes. Each of said rectifier DC output nodes are individually electrically connected to the respective inverter DC input nodes. By this means, each of the rectifier DC output nodes and each of the inverter DC input nodes are voltage balanced by the respective charging and discharging of the rectifier charging means and the inverter discharging means. 15 figs.

  9. Voltage balanced multilevel voltage source converter system

    DOE Patents [OSTI]

    Peng, Fang Zheng; Lai, Jih-Sheng

    1997-01-01

    A voltage balanced multilevel converter for high power AC applications such as adjustable speed motor drives and back-to-back DC intertie of adjacent power systems. This converter provides a multilevel rectifier, a multilevel inverter, and a DC link between the rectifier and the inverter allowing voltage balancing between each of the voltage levels within the multilevel converter. The rectifier is equipped with at least one phase leg and a source input node for each of the phases. The rectifier is further equipped with a plurality of rectifier DC output nodes. The inverter is equipped with at least one phase leg and a load output node for each of the phases. The inverter is further equipped with a plurality of inverter DC input nodes. The DC link is equipped with a plurality of rectifier charging means and a plurality of inverter discharging means. The plurality of rectifier charging means are connected in series with one of the rectifier charging means disposed between and connected in an operable relationship with each adjacent pair of rectifier DC output nodes. The plurality of inverter discharging means are connected in series with one of the inverter discharging means disposed between and connected in an operable relationship with each adjacent pair of inverter DC input nodes. Each of said rectifier DC output nodes are individually electrically connected to the respective inverter DC input nodes. By this means, each of the rectifier DC output nodes and each of the inverter DC input nodes are voltage balanced by the respective charging and discharging of the rectifier charging means and the inverter discharging means.

  10. Reflective optical imaging system with balanced distortion

    DOE Patents [OSTI]

    Chapman, Henry N.; Hudyma, Russell M.; Shafer, David R.; Sweeney, Donald W.

    1999-01-01

    An optical system compatible with short wavelength (extreme ultraviolet) An optical system compatible with short wavelength (extreme ultraviolet) radiation comprising four reflective elements for projecting a mask image onto a substrate. The four optical elements comprise, in order from object to image, convex, concave, convex and concave mirrors. The optical system is particularly suited for step and scan lithography methods. The invention enables the use of larger slit dimensions associated with ring field scanning optics, improves wafer throughput and allows higher semiconductor device density. The inventive optical system is characterized by reduced dynamic distortion because the static distortion is balanced across the slit width.

  11. The United States Plutonium Balance, 1944 - 2009

    National Nuclear Security Administration (NNSA)

    Rocky Flats Site 1995 Rocky Flats Site 2005 Rocky Flats Site 1995 The United States Plutonium Balance, 1944 - 2009 An update of Plutonium: The First 50 Years, DOE/DP-0137, February 1996 June 2012 ii Preface This report updates Plutonium: The first 50 years which was released by the U.S. Department of Energy (DOE) in 1996. The topic of both reports is plutonium, sometimes referred to as Pu-239, which is capable of sustaining a nuclear chain reaction and is used in nuclear weapons and for nuclear

  12. Energy Balance Bowen Ratio Station (EBBR) Handbook

    SciTech Connect (OSTI)

    Cook, DR

    2011-02-23

    The energy balance Bowen ratio (EBBR) system produces 30-minute estimates of the vertical fluxes of sensible and latent heat at the local surface. Flux estimates are calculated from observations of net radiation, soil surface heat flux, and the vertical gradients of temperature and relative humidity (RH). Meteorological data collected by the EBBR are used to calculate bulk aerodynamic fluxes, which are used in the Bulk Aerodynamic Technique (BA) EBBR value-added product (VAP) to replace sunrise and sunset spikes in the flux data. A unique aspect of the system is the automatic exchange mechanism (AEM), which helps to reduce errors from instrument offset drift.

  13. Energy Balance Bowen Ratio (EBBR) Handbook

    SciTech Connect (OSTI)

    Cook, D. R.

    2016-01-01

    The Energy Balance Bowen Ratio (EBBR) system produces 30-minute estimates of the vertical fluxes of sensible and latent heat at the local surface. Flux estimates are calculated from observations of net radiation, soil surface heat flux, and the vertical gradients of temperature and relative humidity (RH). Meteorological data collected by the EBBR are used to calculate bulk aerodynamic fluxes, which are used in the Bulk Aerodynamic Technique (BA) EBBR value-added product (VAP) to replace sunrise and sunset spikes in the flux data. A unique aspect of the system is the automatic exchange mechanism (AEM), which helps to reduce errors from instrument offset drift.

  14. Rotary engine cooling system with flow balancing

    SciTech Connect (OSTI)

    Jones, C.

    1987-05-12

    This patent describes a rotary internal combustion engine having a trochoid rotor housing section and having a group of cooling passages extending through a top-dead-center (TDC) region. The engine is characterized by: at least one passage of the group following a curved path which extends through a first hotter portion of the TDC region, by at least one further passage of the group following a substantially uncurved path through a second cooler portion of the TDC region, and by a fluid restriction for restricting fluid flow through the at least one further passage to balance coolant flow between the passages.

  15. Reflective optical imaging systems with balanced distortion

    DOE Patents [OSTI]

    Hudyma, Russell M.

    2001-01-01

    Optical systems compatible with extreme ultraviolet radiation comprising four reflective elements for projecting a mask image onto a substrate are described. The four optical elements comprise, in order from object to image, convex, concave, convex and concave mirrors. The optical systems are particularly suited for step and scan lithography methods. The invention enables the use of larger slit dimensions associated with ring field scanning optics, improves wafer throughput, and allows higher semiconductor device density. The inventive optical systems are characterized by reduced dynamic distortion because the static distortion is balanced across the slit width.

  16. Heat Balance Study for Submersible Mixer Pump

    SciTech Connect (OSTI)

    Lee, S.Y.

    2003-07-21

    A transient heat balance model was developed to assess the impact of a Submersible Mixer Pump (SMP) on waste temperature during the process of waste mixing and removal for the Type-I SRS tanks. The model results will be mainly used to determine the SMP design impacts on the waste tank temperature during operations and to develop a specification for a new SMP design to replace existing long-shaft mixer pumps used during waste removal. The model will also be used to provide input to the operation planning. This planning will be used as input to pump run duration in order to maintain temperature requirements within the tank during SMP operation.

  17. Herbert Richardson: Before The U.S. House of Representatives...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on Energy and Commerce Subcommittee on Oversight and Investigations Herbert Richardson: Before The U.S. House of Representatives Committee on Energy and Commerce Subcommittee on ...

  18. Appointment of Contracting Officers and Contracting Officer Representatives

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-04-21

    The Order established procedures governing the selection, appointment and termination of Department of Energy contracting officers and contracting officer representatives. Supersedes DOE O 541.1A.

  19. Chapter 1: Energy Challenges | Representative DOE Energy and...

    Broader source: Energy.gov (indexed) [DOE]

    Energy and Science Program Workshops ENERGY U.S. DEPARTMENT OF Quadrennial Technology Review 2015 1 Quadrennial Technology Review 2015 Representative DOE Energy and Science Program ...

  20. Dr. Kelli Joseph, NYISO Representing the ISO-RTO Council

    Broader source: Energy.gov (indexed) [DOE]

    Kelli Joseph, NYISO Representing the ISO-RTO Council July 28, 2014 DOE Quadrennial Energy Review Gas Electric Interdependencies: Coordination Efforts, Regional Issues, and...

  1. DOE-STD-1063-2000 - Facility Representatives

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Safety Analysis Reports * DOE-EM-STD-5502-94, Hazard Baseline Documentation * DOE-EM-STD-5505-96, Operations Assessments * DOE Facility Representative Functional Area ...

  2. Safeguard Application Options for the Laser-Based Item Monitoring System (LBIMS)

    SciTech Connect (OSTI)

    Laughter, Mark D

    2008-10-01

    Researchers at Oak Ridge National Laboratory (ORNL) are developing a Laser-Based Item Monitoring System (LBIMS) for advanced safeguards at nuclear facilities. LBIMS uses a low-power laser transceiver to monitor the presence and position of items with retroreflective tags. The primary advantages of LBIMS are its scalability to continuously monitor a wide range of items, its ability to operate unattended, its low cost of implementation, and its inherent information security due to its line-of-sight and non-broadcasting operation. The primary proposed safeguard application of LBIMS is described in its name: item monitoring. LBIMS could be implemented in a storage area to continuously monitor containers of nuclear material and the area in which they are stored. The system could be configured to provide off-site notification if any of the containers are moved or removed or if the area is accessed. Individual tags would be used to monitor storage containers, and additional tags could be used to record information regarding secondary storage units and room access. The capability to register small changes in tag position opens up the possibility of several other uses. These include continuously monitoring piping arrangements for design information verification or recording equipment positions for other safeguards systems, such as tracking the opening and closing of autoclaves as part of a cylinder tracking system or opening and closing valves on a sample or product take-off line. Combined with attribute tags, which transmit information from any kind of sensor by modulating the laser signal, LBIMS provides the capability to wirelessly and securely collect safeguards data, even in areas where radio-frequency or other wireless communication methods are not practicable. Four application types are described in this report: static item monitoring, in-process item monitoring with trigger tags, multi-layered integration with trigger tags, and line-of-sight data transfer with

  3. Strike a balance with flexible working arrangements

    SciTech Connect (OSTI)

    Madison, Alison L.

    2012-12-15

    Monthly Economic Diversity column for the Tri-City Herald - Topic: Telworking - Excerpt below: As the holiday season kicks into high gear, work-life balance is on many of our minds. How can I meet all of my work commitments this month when no one will be in the office, and still strategically use very little vacation time to stretch the holiday break from four days to fourteen? Am I right? I think most all of us want to stay engaged with our professional lives while maintaining the freedom to prioritize our personal lives. And many employers have come up with ways to help us achieve that balance. Teleworking is not a brand new concept, but is certainly gaining steam as employers and employees alike try to find ways to meet a variety of wants and needs. There are benefits to both sides when it comes to offering flexible working arrangements such as teleworking. For businesses attempting to meet sustainability targets by reducing employee commuting and associated impacts to energy and environment, the benefits of this option can really add up.

  4. Certification of Completion of Item 2 of ASC FY07 Level-2 Milestone ID #2380

    SciTech Connect (OSTI)

    Lipari, D A

    2007-03-28

    This report documents the completion of Item 2 of the three milestone deliverables that comprise Milestone ID 2380: Deploy selected Tri-Lab resource manager at LLNL and develop support model. Specifically: LLNL will integrate and support a commercial resource manager software product at LLNL to be used across the tri-lab HPC facilities.

  5. U.S. Representative Frank Lucas and Oklahoma State Senator

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 U.S. Representative Frank Lucas and Oklahoma State Senator David Myers recently voiced ... Though the SGP central facility and activity hub near Lamont, Oklahoma, has 31 employees ...

  6. Appointment of Contracting Officers and Contracting Officer Representatives

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-04-30

    To establish procedures governing the selection, appointment, and termination of contracting officers and for the appointment of contracting officer representatives. Cancels DOE Order 4200.4A. Canceled by DOE O 541.1A.

  7. Utility Energy Service Contracts Training for Utility Representatives

    Office of Energy Efficiency and Renewable Energy (EERE)

    This webinar targets Federal staff, as well as utility representatives, and provides an understanding of the legal parameters, contracting requirements, financing options, and other aspects of utility energy service contracts (UESC).

  8. Changes to the Facility Representative Program, 10/26/1999

    Office of Energy Efficiency and Renewable Energy (EERE)

    Effective October 1, 1999, the Deputy Secretary tasked this office to manage the Facility Representative Program. We look forward to working with you in continuing and improving this very important...

  9. Department of Defense Representatives Visit Hanford to Benchmark Safety

    Broader source: Energy.gov [DOE]

    RICHLAND, Wash., December 16, 2005, Representatives of the Department of Defense's (DoD's) Voluntary Protection Program Center of Excellence (VPP CX) working to reduce injuries at selected (DoD)...

  10. DOE Representative to World Institute of Nuclear Safety (WINS) | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) DOE Representative to World Institute of Nuclear Safety (WINS) Lisa G. Hilliard Lisa Hilliard August 2009 NNSA Administrator's Silver Award Lisa G. Hilliard has received the NNSA Administrator's Silver Award for her sustained distinguished accomplishments as the Office Director of the DOE office to the U.S. Mission to International Organizations in Vienna from May 1993 to April 2009, serving four Ambassadors, two interim Representatives, and six

  11. Radionuclide Interaction and Transport in Representative Geologic Media |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Radionuclide Interaction and Transport in Representative Geologic Media Radionuclide Interaction and Transport in Representative Geologic Media The report presents information related to the development of a fundamental understanding of disposal-system performance in a range of environments for potential wastes that could arise from future nuclear fuel cycle alternatives. It addresses selected aspects of the development of computational modeling capability for the

  12. A comparison of two models for simulating the water balance of soil covers under semi-arid conditions

    SciTech Connect (OSTI)

    Chammas, G.A.; Geddis, M.; McCaulou, D.R.

    1999-07-01

    Numerical water-balance modeling of store-and-release soil covers for hypothetical mine tailings was conducted using the Hydrologic Evaluation of Landfill Performance (HELP) and SoilCover models. The objective of the modeling was to compare the utility of both models in a semi-arid environment. Although values for input parameters were chosen to make simulations as identical as possible between models, differences in model solution methods and discretization led to different water-balance predictions. Specifically, SoilCover predicted less percolation than HELP, because HELP uses simplified water-routing algorithms which may over predict infiltration and under predict subsequent evapotranspiration. Since SoilCover explicitly solves physically based governing equations for heat and water flow, its predictions more accurately represent the water balance in semi-arid regions where evapotranspiration dominates, HELP can only conservatively predict percolation in dry environments.

  13. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    California, Santa Barbara Catherine Murphy, University of Illinois at Urbana-Champaign Frances Ross, IBM Ned Seeman, New York University Donald Tennant, Cornell Nanoscale Science...

  14. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Elaine Chan Fosters New Collaborations with ALS In an ongoing effort to build closer working relationships between Berkeley Lab's nanoscale science research center and light...

  15. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Such signals are, in principle, sensitive down to the single carrier within the OLED, since the measurement reports on spin permutation symmetry rather than on thermal spin...

  16. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hosted by Frank Svec: Many emerging spintronics applications will utilize dense arrays of nanomagnetic elements. Device properties depend on both the intrinsic material properties ...

  17. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Spin currents are just beginning to be explored as the basis for the emerging new field of spintronics. Coupling the flows of charge and spin currents together opens the door to ...

  18. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    An international team of scientists headed by Feng Wang of the Materials Science Division of Berkeley Lab and Enge Wang of the International Center for Quantum Materials in Beijing...

  19. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OilWater Interface From the people who brought us peptoid nanosheets that form at the ... and water, now come peptoid nanosheets that form at the interface between oil and water. ...

  20. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Keeping Lithography Current: A Novel Approach to The State-of-the-Art This method combines electron beam lithography and atomic layer deposition of aluminum oxide. Etching of the...

  1. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    properties of nanoscale structures. Over the last twenty years there has been tremendous progress in the ability to manipulate matter at levels approaching the atomic scale. By...

  2. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8, 2013 Jeff Urban Joins Eight Researchers in Sharing "Big Ideas" at Science at the Theatre Eight LBNL scientists including Jeff Urban, Director of the Inorganic Nanostructures Facility at the Molecular Foundry, presented eight game-changing concepts in eight minutes as part of the Science at the Theater on Monday, Oct. 28, at the Berkeley Repertory Theater (Roda Stage). In addition to Urban's talk on "synergist materials for energy applications," which can be viewed here,

  3. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4, 2014 Foundry Scientist Presented Next Big Tech Idea at 'Science at the Theater' Event Like a science version of the popular show "Shark Tank," the Lab's next Science at the Theater event featured researchers "pitching" their technologies, followed by audience members and a panel of judges determining which one most benefits society. The event took place at the Berkeley Repertory Theater. In addition to Gloria Oliver's introduction of Molecular Velcro (the winner of the

  4. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    27, 2013 Time: 11:00 am Speaker: Prof. W.E. Moerner, Stanford University Title: Single-Molecule Spectroscopy and Imaging: 3D Nanoscopy and Biomolecular Dynamics Location: 67-3111 Chemla room Hosted by Jim Schuck Since the first optical detection and spectroscopy of a single molecule in a condensed phase host in 1989, a wealth of new information has been obtained from time-dependent measurements and single-molecule probability distributions. When single-molecule labels acting as tiny nanoscale

  5. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    15, 2013 Time: 11:00 am Speaker: Paul Abbyad, Santa Clara University Title: Microfluidic Droplet Arrays for the Study of Red Blood Cell Sickling Location: 67-3111 Chemla room We have developed a novel microfluidic device to study individual red blood cells in droplet arrays. This is a two-phase system where aqueous droplets containing cells are produced and transported in inert carrier oil. Droplets are anchored into an array by the reduction in their surface energy as they enter into

  6. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December 12, 2013 Time: 11:00 am Speaker: Dr. Dr. Peter Gregory, Editor in Chief, Advanced Materials Title: Publishing Trends in Science and How to Survive Peer Review Location: 66-Auditorium Dr. Gregory will reflect on publishing developments over the last 25 years (while celebrating 25 years ofAdvanced Materials) and concentrate on the factors which influence competitiveness, cost, and international character of scientific communication. He will also describe the peer review process "from

  7. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4, 2014 Time: 11:00 am Speaker: Dr. David Baker, University of Washington Title: Design of Protein Structures, Functions and Assemblies Location: 67-3111 Chemla Room Hosted by Ron Zuckermann Abstract: I will describe recent advances in computational protein design which allow the generation of new protein structures and functions. I will describe the use of these methods to design ultra-stable idealized proteins, flu neutralizing proteins, high affinity ligand binding proteins, and self

  8. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tuesday, March 11, 2014 Time: 11:00 am Speaker: Dr. Peter Fischer, Center for X-ray Optics, LBNL Title: Full-field soft x-ray microscopy: a unique tool for nano- and mesoscience Location: 67-3111 Chemla Room Image of Peter Fischer Abstract: For more than a decade research has focused on a fundamental understanding and control of nanoscale behavior. Recently, it has been recognized, that the next step beyond the nanoscale will be governed by mesoscale phenomena [1], since those are supposed to

  9. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    29, 2014 Time: 11:00 am Speaker: Prof. Kevin Webb, Purdue University Title: Nanostructured Materials for Optical Sensing, Control and Signal Processing Location: 67-3111 Chemla Room Hosted by Alex Weber-Bargioni Abstract: I summarize some of our recent accomplishments related to metamaterials, including the proposal of a graphene stack as the blackest material. Relying on fundamental principles, I suggest opportunities for the synthesis of new material mixtures, including active materials that

  10. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0, 2014 Time: 11:00 am Speaker: William Chueh, Stanford University Title: Ion Intercalation in Materials for Batteries and Fuel Cells Location: 67-3111 Chemla Room Abstract: Electrochemistry plays a crucial role in virtually all energy storage and conversion technologies, such as batteries, fuel cells, and artificial leaves. Intercalation processes, such as those involving lithium and oxygen ions in solids, are ubiquitous. Unlike electrochemical reactions on metal surfaces, intercalation

  11. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , 2014 Time: 11:00 am Speaker: Delia Milliron, Department of Chemical Engineering, University of Texas at Austin Title: The Role of Surfaces and Interfaces in Nanocrystal-Based Materials Location: 67-3111 Chemla Room Abstract: In materials constructed from few-nanometer scale building blocks, a large fraction of the total volume lies within a few atomic layers of a surface or an interface. Within the context of plasmonic metal oxide nanocrystals, I will describe a few examples of how these

  12. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7, 2014 Time: 11:00 am Speaker: Eva Nogales, UC Berkeley Title: Visualization of biological macromolecular complexes by Cryo-EM Location: 67-3111 Chemla Room Abstract: The molecular tasks required for the functioning of the cell are carried out by large molecular machines made of proteins or protein-nucleic acid complexes. Visualizing the structures of such complexes, especially in more than one functional state, is crucial for a mechanistic understanding of cellular function that can ultimately

  13. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3, 2014 Time: 11:00 am Speaker: Bryan Jackson, IBM Title: IBM's Brain-Inspired Computing Systems and Ecosystem Location: 67-3111 Chemla Room Abstract: Over the past 6 years as part of the DARPA SyNAPSE program, IBM's Brain Inspired Computing group has created an end-to-end ecosystem that encompasses the entire development stack for neural-inspired applications. Algorithms and applications are first developed in our new programming language and environment; they are then simulated using our

  14. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4, 2014 Time: 11:00 am Speaker: Michael Roukes, Caltech Title: Integrated Neurophotonics: A Vision for Massively-Parallel Interrogation of Brain Activity Location: 67-3111 Chemla Room Abstract: In 2011, six U.S. scientists from different disciplines banded together, outlined a vision [1], and managed to convince the Obama administration of the unprecedented opportunity that now exists to launch a coordinated, large-scale effort to map brain activity. This culminated in the U.S. BRAIN Initiative

  15. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, 2015 Time: 11:00 am Speaker: Gang-Yu Liu, UC Davis Title: Engineered Nanostructures for Regulation and Investigation of Cellular Signaling Processes Location: 67-3111 Chemla Room Bio: Professor Liu's overall research objective focuses on the development of nanotechnology and potential applications to bioanalytical chemistry. One important aspect of the research is the design and engineering of nanostructures which position bioreceptors and chemical reaction sites on surfaces with high

  16. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3, 2015 Time: 11:00 am Speaker: Peng Yin, Harvard Medical School Title: Nanoscale Construction and Imaging with DNA Location: 67-3111 Chemla Room Abstract: I'll discuss how to use DNA to construct and visualize nanoscale structures. I'll first give an overview of my lab's work in DNA nanotechnology. We have invented a general framework to program DNA/RNA strands to self-assemble into structures with user-specified geometry or dynamics. By interfacing these nanostructures with other functional

  17. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    24, 2015 Time: 11:00 am Speaker: Laura Welcher, Director of Operations and The Rosetta Project, The Long Now Foundation; Molecular Foundry User Title: The Rosetta Disk and Strategies for Very Long-term Archiving Location: 67-3111 Chemla Room Abstract: The Rosetta Disk, developed at The Long Now Foundation, is a microscopic archive designed to last for thousands of years. The 7 cm diameter disk is made of nickel, created by electroplating a silicon master etched with a FIB. Each page is .48 mm

  18. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8, 2016 Time: 11:00 am Speaker: Christian Dwyer, Arizona State University Title: Utilizing Inelastically Scattered Electrons in the Transmission Electron Microscope Location: 67-3111 Chemla Room Bio: Christian Dwyer is an electron microscopist with backgrounds in scattering and condensed-matter physics. He is an Associate Professor in the Department of Physics at Arizona State University. He obtained his PhD at the University of Cambridge in 2004, and has worked in academic/research institutes

  19. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FIB Specifications Ion column Electron column Accel. voltage 10-30 kV 0.2 - 30 kV Resolution 7 nm 3 nm

  20. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SPLEEM Specifications Electron energy typically 0 to 100 eV, energy width ~0.1 eV. Electron energy typically 0 to 100 eV, energy width ~0.1 eV. Spin-polarization (normally ~30 %) can be adjusted to point in any polar/azimuthal direction Spatial resolution ~10 nm laterally, atomic resolution along surface normal. Angular resolution of magnetization direction can be better than 2 deg. Time resolution: frame rate can be up to 20 fps, exposure time of several ms per frame is usually required for

  1. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Specifications Specifications 300 kV Monochromator ON Monochromator OFF Information limit 0.05 nm (at 0.15 eV) 0.05 nm STEM resolution 0.078 nm 0.05 nm Energy resolution (EELS) 0.15 eV 0.8 eV TEM 3rd order spherical aberration <1 µm, adjustable (± 50 µm) TEM 5th order spherical aberration ~4 mm STEM 3rd order spherical aberration <0.5 µm STEM 5th order spherical aberration <0.5 mm Specifications 80 kV Monochromator ON Monochromator OFF Information limit 0.07 nm (at 0.2 eV) 0.15 nm

  2. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0.5 Specifications Specifications 300 kV Monochromator ON Monochromator OFF Information limit 0.05 nm (at 0.15 eV) 0.08 nm STEM resolution 0.1 nm 0.05 nm Energy resolution (EELS) 0.10 eV 0.8 eV TEM 3rd order spherical aberration <1 µm, adjustable (± 50 µm) TEM 5th order spherical aberration ~5 mm STEM 3rd order spherical aberration <0.5 µm STEM 5th order spherical aberration <0.5 mm Specifications 80 kV Monochromator ON Monochromator OFF Information limit 0.07 nm (at 0.2 eV) 0.15 nm

  3. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tecnai Specifications Specifications Accel. Voltage: 200 (and 120) kV Spherical Aberration Cs: 0.5 mm Chromatic Aberration Cc: 1.1 mm HRTEM Scherzer resolution 0.19 nm Information limit (monochromator off) 0.12 nm STEM Spatial Resolution Monochromator off 0.14 nm Monochromator on 1.0 nm EELS Energy Resolution Monochromator off 500 meV Monochromator on 150 meV

  4. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Three Foundry Scientists Honored with Director's Awards for Exceptional Achievement Congratulations to Molecular Foundry winners of the 2013 Director's Awards for Exceptional Achievement! Jim Schuck and Alex Weber-Bargioni: Early Scientific Career Award for their work on nanoscale optical imaging and spectroscopy Ron Zuckermann: Safety Award for his leadership in promoting a culture of safety The Director's Awards honor exceptional achievements by laboratory employees that advance the Lab's

  5. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Molecular Foundry Spin-Off Company Wins the NOVA Innovation Competition Heliotrope Technologies, a Molecular Foundry spinoff company, has been declared the winner of the 2012 NOVA Innovation Competition. An Oakland, CA based start-up, Heliotrope works to develop energy-efficient electrochromic window coatings that can switch reversibly between three states: solar transparent, heat blocking, and heat and light blocking.

  6. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Weber-Bargioni Shares Love of Bike Racing with Local Community If you've ever tried to take a sharp turn at high speed on a bicycle, you may have wished you knew more about bicycle physics. And while the basic movement feels simple, riding a bike is in fact quite complex. "It turns out the physics of riding a bike are really, really hard," confessed Alex Weber-Bargioni, a Berkeley Lab materials scientist. Weber-Bargioni was addressing a standing-room-only crowd at the Actual Café in

  7. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Three Foundry Scientists Honored with Director's Awards for Exceptional Achievement Congratulations to the winners from the Molecular Foundry of the 2013 Director's Awards for Exceptional Achievement! Jim Schuck and Alex Weber-Bargioni: Early Scientific Career Award for their work on nanoscale optical imaging and spectroscopy Ron Zuckermann (pictured with LBL Director Paul Alivisatos): Safety Award for his leadership in promoting a culture of safety The Director's Awards honor exceptional

  8. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rachel Segalman Appointed Acting Division Director for Materials Sciences Rachel Segalman has been appointed as the acting director of the Materials Sciences Division, effective July 8. The Molecular Foundry is a part of the Material Sciences Division. She is the lead principal investigator for the Thermoelectrics Program and project leader for the Membranes and Mesoscale Assembly at the Joint Center for Artificial Photosynthesis (JCAP). Segalman is also a professor of chemical engineering at UC

  9. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Raising the IQ of Smart Windows Researchers at the Molecular Foundry have designed a thin coating of nanocrystals embedded in glass that can dynamically modify sunlight as it passes through a window. Unlike existing technologies, the coating provides selective control over visible light and heat-producing near-infrared (NIR) light, so windows can maximize both energy savings and occupant comfort in a wide range of climates. The work was published in the journal Nature by a team of Foundry

  10. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Size Matters as Nanocrystals Go Through Phases Understanding what happens to a material as it undergoes phase transformations - changes from a solid to a liquid to a gas or a plasma - is of fundamental scientific interest and critical for optimizing commercial applications. For metal nanocrystals, assumptions about the size-dependence of phase transformations were made that now need to be re-evaluated. A team of researchers at the Molecular Foundry has demonstrated that as metal nanocrystals go

  11. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Water as In Love, Likes Can Attract At some point in elementary school you were shown that opposite charges attract and like charges repel. This is a universal scientific truth - except when it isn't. A research team led by Berkeley Lab chemist Richard Saykally and theorist David Prendergast, working at the Advanced Light Source (ALS), has shown that, when hydrated in water, positively charged ions (cations) can actually pair up with one another. "Through a combination of X-ray

  12. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2013 Annual User Meeting Postponed Due to significant impacts on our event planning and outreach activities stemming from the recent partial government shutdown, the Annual User Meeting (AUM) that was scheduled for November 4-5, 2013 has been postponed. This event is always a great opportunity to share the latest science and foster stronger connections with members of the Molecular Foundry and NCEM User communities. Plans are being made to reschedule the AUM for the first half of 2014. We

  13. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and NCEM Staff Gather to Identify Scientific Synergies The Molecular Foundry and NCEM staff participated in a Scientific Retreat on November 4-5 - formerly the dates of our joint Annual User Meeting that was canceled due to the government shutdown - to discuss new scientific opportunities in nanoscience and electron scattering that are of interest to the two centers. The retreat focused on the ways that the scientific achievements of the Molecular Foundry and NCEM benefit from increasingly close

  14. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Three Foundry Scientists Receive 2014 Lab Directed Research and Development (LDRD) Awards Director Alivisatos has announced the awards for the FY2014 Laboratory Directed Research and Development (LDRD) program. A total of about $22.1 million was allocated for 77 projects, which primarily focus on fundamental science and translational research in energy science and technology applications, address the use of large-scale computation and data science, and aid in the development of a biological

  15. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jeff Neaton Named American Physical Society (APS) Fellow Molecular Foundry Director and Theory Facility Senior Faculty Scientist, Jeff Neaton, was recently elected as an American Physical Society (APS) Fellow for his "fundamental contributions to the understanding of phase behavior, electronic structure, and transport properties of condensed matter, particularly multiferroics, nanostructures, and materials for energy conversion and storage." This honor signifies "exceptional

  16. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Memoriam: Gareth Thomas (1932-2014) Gareth Thomas, founder of Berkeley Lab's National Center for Electron Microscopy (NCEM) and one of the world's foremost experts on electron microscopy, passed away on February 7. He was 81. A native of Wales, Thomas earned his Ph.D. in metallurgy from Cambridge University, and joined the UC Berkeley (UCB) faculty in 1960. He became a UCB professor of metallurgy and a faculty scientist at Berkeley Lab, then known as Lawrence Berkeley Lab (LBL), in 1966. At a

  17. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bright Future for Protein Nanoprobes Researchers at the Molecular Foundry have discovered surprising new rules for creating ultra-bright light-emitting crystals that are less than 10 nanometers in diameter. These ultra-tiny but ultra-bright nanoprobes should be a big asset for biological imaging, especially deep-tissue optical imaging of neurons in the brain. The multidisciplinary team of researchers led by James Schuck and Bruce Cohen used advanced single-particle characterization and

  18. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NCEM Leadership Change After more than 20 years as Director of the National Center for Electron Microscopy (NCEM), Ulrich Dahmen has stepped into a new role as NCEM Senior Advisor, effective March 15. As Senior Advisor, Dahmen will be focusing on multidisciplinary materials research and helping to set the agenda for electron microscopy research at the Molecular Foundry and NCEM, which are merging into a single User Facility later this year. Under Dahmen's leadership, NCEM has become DOE's

  19. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Discovery of New Semiconductor Holds Promise for 2D Physics and Electronics From super-lubricants, to solar cells, to the fledgling technology of valleytronics, there is much to be excited about with the discovery of a unique new two-dimensional semiconductor, rhenium disulfide, by a large international team of Molecular Foundry users. Rhenium disulfide (ReS2), unlike molybdenum disulfide and other dichalcogenides, behaves electronically as if it were a 2D monolayer even as a 3D bulk material.

  20. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Molecular Foundry Participates in NASA Earth Day Global Selfie

  1. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Weber-Bargioni Selected for Early Career Research Award folks Alex Weber-Bargioni, a staff scientist in the Molecular Foundry's Imaging and Manipulation Facility, was selected as one of 35 scientists from across the nation to receive significant funding for research as part of DOE's Early Career Research Program. The effort, now in its fifth year, is designed to bolster the nation's scientific workforce by providing support to exceptional researchers during the crucial early career years, when

  2. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    folks

  3. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organic Facility Director Frank Svec Retiring folks Frank Svec (left), Director of the Organic and Macromolecular Synthesis Facility since its inception, will be retiring on June 15. Svec's long and distinguished career has led to important discoveries and new understandings of nanoporous polymers, chromatography, and separations science. He has been recognized with several important awards and honors, many of them while at the Foundry. In addition to his valuable scientific contributions, he

  4. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Chemistry for High-Resolution Patterning at the Nanoscale folks Similar to film used in photography, photoresist is used to lay down the patterns of ever-shrinking lines and features on a surface. In a bid to continue decreasing transistor size while increasing computation and energy efficiency, chip-maker Intel has partnered with researchers from the Molecular Foundry - with contributions from ALS - to design an entirely new kind of resist. And importantly, they have done so by

  5. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Shaping the Future of Nanocrystals The first direct observations of how facets form and develop on platinum nanocubes point the way towards more sophisticated and effective nanocrystal design and reveal that a nearly 150 year-old scientific law describing crystal growth breaks down at the nanoscale. Lawrence Berkeley National Laboratory researchers used several highly sophisticated transmission electron microscopes at NCEM through a user project, as well as an advanced high-resolution,

  6. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fall Seminar Series Begins September 16 More information, including speaker abstracts can be found here

  7. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Foundry Scientists Partner with Campus and UCSF in BRAINseed Through a one-of-a-kind collaboration between Berkeley Lab, UC Berkeley and UCSF, BRAINseed hopes to kickstart innovative but risky brain research. The partnership hopes to yield discoveries that accelerate President Barack Obama's national BRAIN (Brain Research through Advancing Innovative Neurotechnologies) Initiative and California's own Cal-BRAIN (California Blueprint for Research to Advance Innovations in Neuroscience) Initiative.

  8. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nanotubes that Insert Themselves into Cell Membranes Researchers have helped show that short carbon nanotubes can make excellent artificial pores within cell membranes. Moreover, these nanotubes, which are far more rugged than their biological counterparts, can self-insert into a cell membrane or other lipid bilayers. Caroline Ajo-Franklin, a Foundry staff scientist, worked with Alex Noy, a biophysicist at Lawrence Livermore National Laboratory (LLNL) used lipids to get the nanotubes the right

  9. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Materials Cover

  10. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Combinatorial Nanoscience Shines in Pure Colors Green/red purity vs. total intensity, observed in the various lanthanide ion combinations. The Molecular Foundry's Delia Milliron and colleagues have employed a powerful combinatorial approach to synthesize nanocrystals that glow in bright, pure colors when excited with near infrared light. - a process known as upconversion. These nanocrystals may allow for biological imaging with less harmful radiation than current methods, and can be more easily