Powered by Deep Web Technologies
Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

MODELING POWDERED SORBENT INJECTION IN COMBINATION WITHE FABRIC FILTER FOR THE CONTROL OF MERCURY EMISSIONS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

POWDERED SORBENT INJECTION IN POWDERED SORBENT INJECTION IN COMBINATION WITH FABRIC FILTER FOR THE CONTROL OF MERCURY EMISSIONS Joseph R. V. Flora Department of Civil and Environmental Engineering University of South Carolina, Columbia, SC 29208 Richard A. Hargis, William J. O'Dowd, Henry W. Pennline National Energy Technology Laboratory, U.S. Department of Energy P.O. Box, 10940, Pittsburgh, PA 15236 Radisav D. Vidic * Department of Civil and Environmental Engineering University of Pittsburgh, Pittsburgh, PA 15261 ABSTRACT A two-stage mathematical model for mercury removal using powdered activated carbon injection upstream of a baghouse filter was developed, with the first stage accounting for removal in the ductwork and the second stage accounting for additional removal due to the

2

Design and fabrication of a 100 GHz channel-drop filter  

SciTech Connect (OSTI)

We have designed and are fabricating a novel passive mm-wave spectrometer based on a Photonic Band Gap (PBG) channel-drop filter (CDF). There is a need for a compact wide-band versatile and configurable mm-wave spectrometer for applications in mm-wave communications, radio astronomy, and radar receivers for remote sensing and nonproliferation.

Smirnova, Evgenya I [Los Alamos National Laboratory; Earley, Lawrence M [Los Alamos National Laboratory; Heath, Cynthia E [Los Alamos National Laboratory; Shchegolkov, Dmitry Y [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

3

Advanced semiconductor fabrication process control using dual filter exponentially weighted moving average  

Science Journals Connector (OSTI)

Semiconductor industry needs to meet high standards to ensure survival and success in the 21st century. Rising expectations from the customers are demanding the semiconductor industry to manufacture products with both accuracy and precision. To comply ... Keywords: Dual filter EWMA, EWMA, Process control, Run-to-run, Semiconductor fabrication process

Hyo-Heon Ko; Jihyun Kim; Sang-Hoon Park; Jun-Geol Baek; Sung-Shick Kim

2012-06-01T23:59:59.000Z

4

Using high temperature baghouses to enhance desulfurization following economizer sorbent injection  

SciTech Connect (OSTI)

In order to explore the potential of using high temperature baghouses to enhance SO{sub 2} removal following upstream sorbent injection, an integrated two-stage reactor system has been built. It consists of an injection stage and a filtration stage. Distinct from one-stage fixed-bed reactors, sorbent particles in this system are initially converted under controlled injection conditions before entering the filtration reactor chamber. By the aid of the system, several unique features regarding the gas-solid reactions in the baghouse after economizer zone sorbent injection have been revealed. Results have shown that the appropriate usage of a high temperature baghouse may substantially enhance the performance of the process. The further SO{sub 2} removal in the baghouse is comprehensively affected by both the conditions in the injection zone and those in the baghouse.

Li, G.; Keener, T.C. [Univ. of Cincinnati, OH (United States). Dept. of Civil and Environmental Engineering

1995-12-31T23:59:59.000Z

5

Fabric filter versus ESP designs to meet no visible emissions for Brandon shores  

SciTech Connect (OSTI)

This paper investigates the designs of particulate collection equipment to achieve no visible emissions criteria, or a visually clear stack, at the Brandon Shores Station of the Baltimore Gas and Electric Co. The transmissometer opacity corresponding to the ''no visible emissions'' (NVE) criteria for a visually clear plume was established. A stack exit concentration was established to achieve the design instrument opacity. The proposed fabric filter and cold-side electrostatic precipitator (ESP) equipment were evaluated on a technical and economic basis for achieving the design stack exit concentration. The technical evaluation included a comprehensive review of fabric filter and cold-side ESP operating installations and the use of a computer model to predict site-specific ESP performance and expected operating margins. A review of operating installations and use of state-of-the-art computer models demonstrates that conservatively designed fabric filters or cold-side ESP equipment should be capable of achieving an outlet or stack exit concentration of 0.004 gr/acf.

Becker, D.F.; Klopp, A.C.; Kusterer, J.N.; Link, S.A.

1983-01-01T23:59:59.000Z

6

Hydrometallurgical process for recovering iron sulfate and zinc sulfate from baghouse dust  

DOE Patents [OSTI]

A process for recovering zinc-rich and iron-rich fractions from the baghouse dust that is generated in various metallurgical operations, especially in steel-making and other iron-making plants, comprises the steps of leaching the dust by hot concentrated sulfuric acid so as to generate dissolved zinc sulfate and a precipitate of iron sulfate, separating the precipitate from the acid by filtration and washing with a volatile liquid, such as methanol or acetone, and collecting the filtered acid and the washings into a filtrate fraction. The volatile liquid may be recovered by distillation, and the zinc may be removed from the filtrate by alternative methods, one of which involves addition of a sufficient amount of water to precipitate hydrated zinc sulfate at 10 C, separation of the precipitate from sulfuric acid by filtration, and evaporation of water to regenerate concentrated sulfuric acid. The recovery of iron may also be effected in alternative ways, one of which involves roasting the ferric sulfate to yield ferric oxide and sulfur trioxide, which can be reconverted to concentrated sulfuric acid by hydration. The overall process should not generate any significant waste stream. 1 figure.

Zaromb, S.; Lawson, D.B.

1994-02-15T23:59:59.000Z

7

Microcomputer programs for particulate control: section failure; baghouse; plume opacity prediction; and in-stack opacity calculator. Software  

SciTech Connect (OSTI)

IBM-PC usable versions of several computer models useful in particulate control are provided. The models were originally written for the TRS-80 Model I-III series of microcomputers and have been translated to run on the IBM-PC. The documentation for the TRS-80 versions applies to the IBM-PC versions. The programs are written in FORTRAN and are provided in both source (FORTRAN) and executable form. Some small machine language routines are used to format the screen for data entry. These routines limit the programs to IBM-PC and close clones. The minimum hardware requirements are 256K IBM-PC or close clone, a monochrome monitor, and a disk drive. A printer is useful but not required. The following computer programs are provided in the four-disk package: (1) ESP section failure model, (2) GCA/EPA baghouse model, (3) Plume opacity prediction model, and (4) In-stack opacity calculator. All the models are documented in EPA report Microcomputer Programs for Particulate Control, EPA-600/8-85-025a (PB86-146529). The models provide useful tools for those involved in particulate control.

Sparks, L.E.

1985-09-01T23:59:59.000Z

8

Long-Term Carbon Injection Field Test for 90% Mercury Removal for a PRB Unit a Spray Dryer and Fabric Filter  

SciTech Connect (OSTI)

The power industry in the U.S. is faced with meeting regulations to reduce the emissions of mercury compounds from coal-fired plants. Injecting a sorbent such as powdered activated carbon (PAC) into the flue gas represents one of the simplest and most mature approaches to controlling mercury emissions from coal-fired boilers. The purpose of this test program was to evaluate the long-term mercury removal capability, long-term mercury emissions variability, and operating and maintenance (O&M) costs associated with sorbent injection on a configuration being considered for many new plants. Testing was conducted by ADA Environmental Solutions (ADA) at Rocky Mountain Power’s (RMP) Hardin Station through funding provided by DOE/NETL, RMP, and other industry partners. The Hardin Station is a new plant rated at 121 MW gross that was first brought online in April of 2006. Hardin fires a Powder River Basin (PRB) coal and is configured with selective catalytic reduction (SCR) for NOx control, a spray dryer absorber (SDA) for SO2 control, and a fabric filter (FF) for particulate control. Based upon previous testing at PRB sites with SCRs, very little additional mercury oxidation from the SCR was expected at Hardin. In addition, based upon results from DOE/NETL Phase II Round I testing at Holcomb Station and results from similarly configured sites, low native mercury removal was expected across the SDA and FF. The main goal of this project was met—sorbent injection was used to economically and effectively achieve 90% mercury control as measured from the air heater (AH) outlet to the stack for a period of ten months. This goal was achieved with DARCO® Hg-LH, Calgon FLUEPAC®-MC PLUS and ADA Power PAC PREMIUM brominated activated carbons at nominal loadings of 1.5–2.5 lb/MMacf. An economic analysis determined the twenty-year levelized cost to be 0.87 mills/kW-hr, or $15,000/lb Hg removed. No detrimental effects on other equipment or plant operations were observed. The results of this project also filled a data gap for plants firing PRB coal and configured with an SCR, SDA, and FF, as many new plants are being designed today. Another goal of the project was to evaluate, on a short-term basis, the mercury removal associated with coal additives and coal blending with western bituminous coal. The additive test showed that, at this site, the coal additive known as KNX was affective at increasing mercury removal while decreasing sorbent usage. Coal blending was conducted with two different western bituminous coals, and West Elk coal increased native capture from nominally 10% to 50%. Two additional co-benefits were discovered at this site. First, it was found that native capture increased from nominally 10% at full load to 50% at low load. The effect is believed to be due to an increase in mercury oxidation across the SCR caused by a corresponding decrease in ammonia injection when the plant reduces load. Less ammonia means more active oxidation sites in the SCR for the mercury. The second co-benefit was the finding that high ammonia concentrations can have a negative impact on mercury removal by powdered activated carbon. For a period of time, the plant operated with a high excess of ammonia injection necessitated by the plugging of one-third of the SCR. Under these conditions and at high load, the mercury control system could not maintain 90% removal even at the maximum feed rate of 3.5 lb/MMacf (pounds of mercury per million actual cubic feet). The plant was able to demonstrate that mercury removal was directly related to the ammonia injection rate in a series of tests where the ammonia rate was decreased, causing a corresponding increase in mercury removal. Also, after the SCR was refurbished and ammonia injection levels returned to normal, the mercury removal performance also returned to normal. Another goal of the project was to install a commercial-grade activated carbon injection (ACI) system and integrate it with new-generation continuous emissions monitors for mercury (Hg-CEMs) to allow automatic feedback control on outlet me

Sjostrom, Sharon; Amrhein, Jerry

2009-04-30T23:59:59.000Z

9

Note: Cryogenic coaxial microwave filters  

SciTech Connect (OSTI)

The careful filtering of microwave electromagnetic radiation is critical for controlling the electromagnetic environment for experiments in solid-state quantum information processing and quantum metrology at millikelvin temperatures. We describe the design and fabrication of a coaxial filter assembly and demonstrate that its performance is in excellent agreement with theoretical modelling. We further perform an indicative test of the operation of the filters by making current-voltage measurements of small, underdamped Josephson junctions at 15 mK.

Tancredi, G.; Meeson, P. J. [Department of Physics, Royal Holloway, University of London, Egham TW20 0EX (United Kingdom)] [Department of Physics, Royal Holloway, University of London, Egham TW20 0EX (United Kingdom); Schmidlin, S. [Department of Physics, Royal Holloway, University of London, Egham TW20 0EX (United Kingdom) [Department of Physics, Royal Holloway, University of London, Egham TW20 0EX (United Kingdom); National Physical Laboratory, Hampton Road, Teddington TW11 0LW (United Kingdom)

2014-02-15T23:59:59.000Z

10

Disk filter  

DOE Patents [OSTI]

An electric disk filter provides a high efficiency at high temperature. A hollow outer filter of fibrous stainless steel forms the ground electrode. A refractory filter material is placed between the outer electrode and the inner electrically isolated high voltage electrode. Air flows through the outer filter surfaces through the electrified refractory filter media and between the high voltage electrodes and is removed from a space in the high voltage electrode.

Bergman, W.

1985-01-09T23:59:59.000Z

11

A rigid porous filter and filtration method  

SciTech Connect (OSTI)

The present invention involves a porous rigid filter comprising a plurality of concentric filtration elements having internal flow passages and forming external flow passages there between. The present invention also involves a pressure vessel containing the filter for the removal of particulate from high pressure particulate containing gases, and further involves a method for using the filter to remove such particulate. The present filter has the advantage of requiring fewer filter elements due to the high surface area- to-volume ratio provided by the filter, requires a reduced pressure vessel size, and exhibits enhanced mechanical design properties, improved cleaning properties, configuration options, modularity and ease of fabrication.

Chiang, Ta-Kuan; Straub, Douglas, Straub L.; Dennis, Richard A.

1998-12-01T23:59:59.000Z

12

Chip-Scale Quadrupole Mass Filters for Portable Mass Spectrometry  

E-Print Network [OSTI]

We report the design, fabrication, and characterization of a new class of chip-scale quadrupole mass filter (QMF). The devices are completely batch fabricated using a wafer-scale process that integrates the quadrupole ...

Cheung, Kerry

13

ADVANCED HOT GAS FILTER DEVELOPMENT  

SciTech Connect (OSTI)

This report describes the fabrication and testing of continuous fiber ceramic composite (CFCC) based hot gas filters. The fabrication approach utilized a modified filament winding method that combined both continuous and chopped fibers into a novel microstructure. The work was divided into five primary tasks. In the first task, a preliminary set of compositions was fabricated in the form of open end tubes and characterized. The results of this task were used to identify the most promising compositions for sub-scale filter element fabrication and testing. In addition to laboratory measurements of permeability and strength, exposure testing in a coal combustion environment was performed to asses the thermo-chemical stability of the CFCC materials. Four candidate compositions were fabricated into sub-scale filter elements with integral flange and a closed end. Following the 250 hour exposure test in a circulating fluid bed combustor, the retained strength ranged from 70 t 145 percent of the as-fabricated strength. The post-test samples exhibited non-catastrophic failure behavior in contrast to the brittle failure exhibited by monolithic materials. Filter fabrication development continued in a filter improvement and cost reduction task that resulted in an improved fiber architecture, the production of a net shape flange, and an improved low cost bond. These modifications were incorporated into the process and used to fabricate 50 full-sized filter elements for testing in demonstration facilities in Karhula, Finland and at the Power Systems Development Facility (PSDF) in Wilsonville, AL. After 581 hours of testing in the Karhula facility, the elements retained approximately 87 percent of their as-fabricated strength. In addition, mechanical response testing at Virginia Tech provided a further demonstration of the high level of strain tolerance of the vacuum wound filter elements. Additional testing in the M. W. Kellogg unit at the PSDF has accumulated over 1800 hours of coal firing at temperatures of 760 °C including a severe thermal upset that resulted in the failure of several monolithic oxide elements. No failures of any kind have been reported for the MTI CFCC elements in either of these test campaigns. Additional testing is planned at the M. W. Kellogg unit and Foster Wheeler unit at the PSDF over the next year in order to qualify for consideration for the Lakeland PCFB. Process scale-up issues have been identified and manufacturing plans are being evaluated to meet the needs of future demand.

RICHARD A. WAGNER

1998-09-04T23:59:59.000Z

14

Filtering apparatus  

DOE Patents [OSTI]

A vertical vessel having a lower inlet and an upper outlet enclosure separated by a main horizontal tube sheet. The inlet enclosure receives the flue gas from a boiler of a power system and the outlet enclosure supplies cleaned gas to the turbines. The inlet enclosure contains a plurality of particulate-removing clusters, each having a plurality of filter units. Each filter unit includes a filter clean-gas chamber defined by a plate and a perforated auxiliary tube sheet with filter tubes suspended from each tube sheet and a tube connected to each chamber for passing cleaned gas to the outlet enclosure. The clusters are suspended from the main tube sheet with their filter units extending vertically and the filter tubes passing through the tube sheet and opening in the outlet enclosure. The flue gas is circulated about the outside surfaces of the filter tubes and the particulate is absorbed in the pores of the filter tubes. Pulses to clean the filter tubes are passed through their inner holes through tubes free of bends which are aligned with the tubes that pass the clean gas.

Haldipur, Gaurang B. (Monroeville, PA); Dilmore, William J. (Murrysville, PA)

1992-01-01T23:59:59.000Z

15

Free-standing inductive grid filter for infrared radiation rejection  

Science Journals Connector (OSTI)

We developed a fabrication method for free-standing metal structures with high aspect ratios to manufacture inductive grid filters for infrared rejection. Deep grooves in thermally evaporated SiO"2 layer, fabricated by electron beam lithography and etching, ... Keywords: Inductive grid filter, Infrared rejection, Metallic nanostructures

Konstantins Jefimovs; Janne Laukkanen; Tuomas Vallius; Tero Pilvi; Mikko Ritala; Tomi Meilahti; Matti Kaipiainen; Marcos Bavdaz; Markku Leskelä; Jari Turunen

2006-04-01T23:59:59.000Z

16

Cryogenic Fabric  

Science Journals Connector (OSTI)

The distinct soil micromorphology is produced due to the effects of freezing and thawing processes and is termed as cryogenic fabric. Layers, lenses, and streaks of segregation ice are typical elements of the cryogenic

P. Pradeep Kumar

2014-08-01T23:59:59.000Z

17

Fabric Facts.  

E-Print Network [OSTI]

's Sewing Book. Stanford, Conn: Coats and Clark's, Inc., 1976. Complete Sewing Guide. Pleasantville, NY: The Reader's Digest Association, Inc;, 1976. "Giving Conventional Fabrics a Run for the Money." Clothes Etc. New York: Prads, Inc., April 15, 1978...

Saunders, Becky

1980-01-01T23:59:59.000Z

18

Impedance Matched Absorptive Thermal Blocking Filters  

E-Print Network [OSTI]

We have designed, fabricated and characterized absorptive thermal blocking filters for cryogenic microwave applications. The transmission line filter's input characteristic impedance is designed to match $50\\,\\Omega$ and its response has been validated from 0-to-50\\,GHz. The observed return loss in the 0-to-20\\,GHz design band is greater than $20\\,$dB and shows graceful degradation with frequency. Design considerations and equations are provided that enable this approach to be scaled and modified for use in other applications.

Wollack, E J; Rostem, K; U-Yen, K

2014-01-01T23:59:59.000Z

19

Free-standing inductive grid filter for infrared radiation rejection  

Science Journals Connector (OSTI)

We developed a fabrication method for free-standing metal structures with high aspect ratios to manufacture inductive grid filters for infrared rejection. Deep grooves in thermally evaporated SiO2 layer, fabricated by electron beam lithography and etching, were filled with iridium by atomic layer deposition technique. Characterization shows that the fabricated structures can suppress infrared radiation over two orders of magnitude while transmitting 40% of XUV radiation.

Konstantins Jefimovs; Janne Laukkanen; Tuomas Vallius; Tero Pilvi; Mikko Ritala; Tomi Meilahti; Matti Kaipiainen; Marcos Bavdaz; Markku Leskelä; Jari Turunen

2006-01-01T23:59:59.000Z

20

Gas Filter Testing Methods  

Science Journals Connector (OSTI)

Gas filtration of air in the cleanroom is carried out with HEPA (high- ... filter. The ambient air filters for the cleanroom are relatively fragile and require great care...

Alvin Lieberman

1992-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Recirculating electric air filter  

DOE Patents [OSTI]

An electric air filter cartridge has a cylindrical inner high voltage electrode, a layer of filter material, and an outer ground electrode formed of a plurality of segments moveably connected together. The outer electrode can be easily opened to remove or insert filter material. Air flows through the two electrodes and the filter material and is exhausted from the center of the inner electrode.

Bergman, W.

1985-01-09T23:59:59.000Z

22

Hepa filter dissolution process  

DOE Patents [OSTI]

A process for dissolution of spent high efficiency particulate air (HEPA) filters and then combining the complexed filter solution with other radioactive wastes prior to calcining the mixed and blended waste feed. The process is an alternate to a prior method of acid leaching the spent filters which is an inefficient method of treating spent HEPA filters for disposal.

Brewer, Ken N. (Arco, ID); Murphy, James A. (Idaho Falls, ID)

1994-01-01T23:59:59.000Z

23

Fuel Fabrication Facility  

National Nuclear Security Administration (NNSA)

Construction of the Mixed Oxide Fuel Fabrication Facility Construction of the Mixed Oxide Fuel Fabrication Facility November 2005 May 2007 June 2008 May 2012...

24

Preparation of Metal Filter Element for Fail Safety in IGCC Filter Unit  

SciTech Connect (OSTI)

Metal filter elements as the fail safety filter are fabricated by the methods using cold isostatic pressure (compress method) and binder (binder method) to form the filter element and tested in a experimental and bench units. The fail safety filter on the filtration system is mounted additionally in order to intercept the particle leak when the main filter element is broken. So it should have two contrary functions of a high permeability and being plugged easily. The filter element having high porosity and high plugging property was fabricated by the bind method. It has the porosity more than 50%, showed very small pressure drop less than 10mmH2O at the face velocity of 0.15m/s, and plugged within 5 minutes with the inhibition of the particle leak larger than 4 {micro}m. The test result of corrosion tendency in IGCC gas stream at 500 C shows SUS310L material is very reasonable among SUS310, SUS316, Inconel 600, and Hastelloy X.

Choi, J-H.; Ahn, I-S.; Bak, Y-C.; Bae, S-Y.; Ha, S-J.; Jang, H-J.

2002-09-18T23:59:59.000Z

25

Polymorphous computing fabric  

DOE Patents [OSTI]

Fabric-based computing systems and methods are disclosed. A fabric-based computing system can include a polymorphous computing fabric that can be customized on a per application basis and a host processor in communication with said polymorphous computing fabric. The polymorphous computing fabric includes a cellular architecture that can be highly parameterized to enable a customized synthesis of fabric instances for a variety of enhanced application performances thereof. A global memory concept can also be included that provides the host processor random access to all variables and instructions associated with the polymorphous computing fabric.

Wolinski, Christophe Czeslaw (Los Alamos, NM); Gokhale, Maya B. (Los Alamos, NM); McCabe, Kevin Peter (Los Alamos, NM)

2011-01-18T23:59:59.000Z

26

Cordierite silicon nitride filters  

SciTech Connect (OSTI)

The objective of this project was to develop a silicon nitride based crossflow filter. This report summarizes the findings and results of the project. The project was phased with Phase I consisting of filter material development and crossflow filter design. Phase II involved filter manufacturing, filter testing under simulated conditions and reporting the results. In Phase I, Cordierite Silicon Nitride (CSN) was developed and tested for permeability and strength. Target values for each of these parameters were established early in the program. The values were met by the material development effort in Phase I. The crossflow filter design effort proceeded by developing a macroscopic design based on required surface area and estimated stresses. Then the thermal and pressure stresses were estimated using finite element analysis. In Phase II of this program, the filter manufacturing technique was developed, and the manufactured filters were tested. The technique developed involved press-bonding extruded tiles to form a filter, producing a monolithic filter after sintering. Filters manufactured using this technique were tested at Acurex and at the Westinghouse Science and Technology Center. The filters did not delaminate during testing and operated and high collection efficiency and good cleanability. Further development in areas of sintering and filter design is recommended.

Sawyer, J.; Buchan, B. (Acurex Environmental Corp., Mountain View, CA (United States)); Duiven, R.; Berger, M. (Aerotherm Corp., Mountain View, CA (United States)); Cleveland, J.; Ferri, J. (GTE Products Corp., Towanda, PA (United States))

1992-02-01T23:59:59.000Z

27

3-D woven, mullite matrix, composite filter  

SciTech Connect (OSTI)

Westinghouse, with Techniweave as a major subcontractor, is conducting a three-phase program aimed at providing advanced candle filters for a 1996 pilot scale demonstration in one of the two hot gas filter systems at Southern Company Service`s Wilsonville PSD Facility. The Base Program (Phases I and II) objective is to develop and demonstrate the suitability of the Westinghouse/Techniweave next generation composite candle filter for use in Pressurized Fluidized Bed Combustion (PFBC) and/or Integrated Gasification Combined Cycle (IGCC) power generation systems. The Optional Task (Phase M, Task 5) objective is to fabricate, inspect and ship to Wilsonville Hot gas particulate filters are key components for the successful commercializaion of advanced coal-based power-generation systems such as Pressurized Fluidized-bed Combustion (PFBC), including second-generation PFBC, and Integrated Gasification Combined Cycles (IGCC). Current generation monolithic ceramic filters are subject to catastrophic failure because they have very low resistance to crack propagation. To overcome this problem, a damage-tolerant ceramic filter element is needed.

Lane, J.E.; Painter, C.J.; Radford, K.C. LeCostaouec, J.F.

1995-12-01T23:59:59.000Z

28

Diesel particulate filters  

Science Journals Connector (OSTI)

Is the broad market introduction of diesel particulate filters throughout Europe wishful thinking or reality? The challenges facing the introduction of diesel particulate filters with a fuel-borne catalyst...

Pierre Macaudičre; Laurent Rocher; Wolfgang Naschke

2004-04-01T23:59:59.000Z

29

ElectronicFabrication  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fabrication Fabrication Manufacturing Technologies Electronic Fabrication provides our cus- tomers solutions for the packaging design, production acceptable prototype fabrica- tion, or deliverable production fabrication. Capabilities * Final electronic product packaging from sketches and verbal instructions * Provide CAD drawing package after project completion if no formal prints are available * Complete system development and fab- rication through concurrent engineering * Concurrent engineering in prototype and production fabrication * Integrate commercial equipment into prototype system design * Implementation and modification of commercial equipment * Packaging of prototype into finalized product assembly Resources * Customer assistance from fabrication, to testing, to complete system installation

30

Adaptive and Temporallydependent Document Filtering  

E-Print Network [OSTI]

Adaptive and Temporally­dependent Document Filtering een wetenschappelijke proeve op het gebied van . . . . . . . . . . . . . . . . . . . . . 1 1.2 Document Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.3 Filtering Filtering Track 57 5.1 What is TREC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 5

Arampatzis, Avi

31

TESTING OF THE SECOND GENERATION SPINTEK ROTARY FILTER -11357  

SciTech Connect (OSTI)

The SpinTek rotary microfilter has been developed under the Department of Energy (DOE) Office of Environmental Management (EM) for the purpose of deployment in radioactive service in the DOE complex. The unit that was fabricated and tested is the second generation of the filter that incorporates recommended improvements from previous testing. The completion of this test satisfied a key milestone for the EM technology development program and technology readiness for deployment by Savannah River Remediation in the Small Column Ion Exchange and Sludge Washing processes at the Savannah River Site (SRS). The Savannah River National Laboratory (SRNL) contracted SpinTek Filtration to fabricate a full scale 25 disk rotary filter and perform a 1000 hour endurance test with a simulated SRS sludge. Over 1500 hours of operation have been completed with the filter. SpinTek Filtration fabricated a prototypic 25 disk rotary filter including updates to manufacturing tolerances, an updated design to the rotary joint, improved cooling to the bottom journal, decreases in disk and filter shaft hydraulic resistances. The filter disks were fabricated with 0.5 {micro} pore size, sintered-metal filter media manufactured by Pall Corporation (M050). After fabrication was complete, the filter passed acceptance tests demonstrating rejection of solids and clean water flux with a 50% improvement over the previous filters. Once the acceptance test was complete, a 1000 hour endurance test was initiated simulating a sludge washing process. The test used a simulated SRS Sludge Batch 6 recipe. The insoluble solids started at 5 wt% and were raised to 10 and 15 wt% insoluble solids to simulate the concentration of a large volume tank. The filter system was automated and set up for 24 hour unattended operation. To facilitate this, process control logic was written to operate the filter. During the development it was demonstrated that the method of starting and stopping the filter can affect the build up of filter cake on the disks and therefore the performance of the filter. The filter performed well with the simulant. Very little drop in production was noticed between the 5 and 10 wt% insoluble solids feed. Increasing to 15 wt% had a more pronounced impact due to the rheology of the feed. Acid cleaning was used to clean the filter disks in-situ and restore filtration rate to almost 90% of the initial clean disk rate. Eighty liters of 0.2 M nitric acid in conjunction with water rinses were used to clean the filter in less than 2 hours. Filter testing was completed after 1000 hours of operation were performed on the final filter assembly configuration. The total run time for the testing was over 1500 hours. At the end of the test, the sludge washing was performed successfully from approximately 5.6 M to less than 1 M sodium.

Herman, D.; Poirier, M.; Fowley, M.; Keefer, M.; Huff, T.

2011-02-02T23:59:59.000Z

32

Filtering diesel exhaust gases with ceramic filters  

Science Journals Connector (OSTI)

Results are given from three test series on a ceramic filter for diesel exhausts. In the first and second series, use was made of diesel fuel (in the summer), while in...

A. Yu. Val’dberg; A. N. Tsedilin; T. O. Kosogorova…

2008-03-01T23:59:59.000Z

33

Engineering Spectral Control Using Front Surface Filters for Maximum TPV Energy Conversion System Performance  

SciTech Connect (OSTI)

Energy conversion efficiencies of better than 23% have been demonstrated for small scale tests of a few thermophotovoltaic (TPV) cells using front surface, tandem filters [1, 2]. The engineering challenge is to build this level of efficiency into arrays of cells that provide useful levels of energy. Variations in cell and filter performance will degrade TPV array performance. Repeated fabrication runs of several filters each provide an initial quantification of the fabrication variation for front surface, tandem filters for TPV spectral control. For three performance statistics, within-run variation was measured to be 0.7-1.4 percent, and run-to-run variation was measured to be 0.5-3.2 percent. Fabrication runs using a mask have been shown to reduce variation across interference filters from as high as 8-10 percent to less than 1.5 percent. Finally, several system design and assembly approaches are described to further reduce variation.

T Rahmlow, Jr; J Lazo-Wasem, E Gratrix; J Azarkevich; E Brown; D DePoy; D Eno; P Fourspring; J Parrington; R Mahorter; B Wernsman

2004-10-14T23:59:59.000Z

34

Engineering Spectral Control Using Front Surface Filters for Maximum TPV Energy Conversion System Performance  

SciTech Connect (OSTI)

Energy conversion efficiencies of better than 23% have been demonstrated for small scale tests of a few thermophotovoltaic (TPV) cells using front surface, tandem filters [1,2]. The engineering challenge is to build this level of efficiency into arrays of cells that provide useful levels of energy. Variations in cell and filter performance will degrade TPV array performance. Repeated fabrication runs of several filters each provide an initial quantification of the fabrication variation for front surface, tandem filters for TPV spectral control. For three performance statistics, within-run variation was measured to be 0.7-1.4 percent, and run-to-run variation was measured to be 0.5-3.2 percent. Fabrication runs using a mask have been shown to reduce variation across interference filters from as high 8-10 percent to less than 1.5 percent. Finally, several system design and assembly approaches are described to further reduce variation.

TD Rahmlaw, Jr; JE Lazo-Wasem; EJ Gratrix; JJ Azarkevich; EJ Brown; DM DePoy; DR Eno; PM Fourspring; JR Parrington; RG Mahorter; B Wernsman

2004-08-04T23:59:59.000Z

35

MECS 2006- Fabricated Metals  

Broader source: Energy.gov [DOE]

Manufacturing Energy and Carbon Footprint for Fabricated Metals (NAICS 332) Sector with Total Energy Input, October 2012 (MECS 2006)

36

Linear phase compressive filter  

DOE Patents [OSTI]

A phase linear filter for soliton suppression is in the form of a laddered series of stages of non-commensurate low pass filters with each low pass filter having a series coupled inductance (L) and a reverse biased, voltage dependent varactor diode, to ground which acts as a variable capacitance (C). L and C values are set to levels which correspond to a linear or conventional phase linear filter. Inductance is mapped directly from that of an equivalent nonlinear transmission line and capacitance is mapped from the linear case using a large signal equivalent of a nonlinear transmission line.

McEwan, Thomas E. (Livermore, CA)

1995-01-01T23:59:59.000Z

37

Filter Replacement Activities Complete  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

airflow levels now that both filter units are operational. Additionally, teams can resume entries to evaluate the condition of the underground facility and verify that...

38

Synthesis and Diagnosis of RF Filters in Liquid Crystalline Polymer (LCP) Substrate  

E-Print Network [OSTI]

Synthesis and Diagnosis of RF Filters in Liquid Crystalline Polymer (LCP) Substrate Souvik-consuming step in the manufacturing cycle. This paper presents the application of layout-level synthesis synthesized and fabricated. The results of synthesis are within 5% of EM measurement data. The fabricated

Swaminathan, Madhavan

39

Development of active porous medium filters based on plasma textiles  

Science Journals Connector (OSTI)

Inexpensive flexible washable and durable materials that serve as antimicrobial filters and self-decontaminating fabrics are needed to provide active protection to people in areas regularly exposed to various biohazards such as hospitals and bio research labs working with pathogens. Airlines and cruise lines need such material to combat the spread of infections. In households these materials can be used in HVAC filters to fight indoor pollution which is especially dangerous to people suffering from asthma. Efficient filtering materials are also required in areas contaminated by other types of hazardous dust particulates such as nuclear dust. The primary idea that guided the undertaken study is that a microplasma-generating structure can be embedded in a textile fabric to generate a plasma sheath (“plasma shield”) that kills bacterial agents coming in contact with the fabric. The research resulted in the development of a plasma textile that can be used for producing new types of self-decontaminating garments fabrics and filter materials capable of activating a plasma sheath that would filter capture and destroy any bacteriological agent deposited on its surface. This new material relies on the unique antimicrobial and catalytic properties of cold (room temperature) plasma that is benign to people and does not cause thermal damage to many polymer textiles such as Nomex and polypropylene. The uniqueness of cold plasma as a disinfecting agent lies in the inability of bacteria to develop resistance to plasma exposure as they can for antibiotics. Plasma textiles could thus be utilized for microbial destruction in active antimicrobial filters (for continuous decontamination and disinfection of large amounts of air) as well as in self-decontaminating surfaces and antibacterial barriers (for example for creating local antiseptic or sterile environments around wounds and burns).

Ivan A. Kuznetsov; Alexei V. Saveliev; Srinivasan Rasipuram; Andrey V. Kuznetsov; Alan Brown; Warren Jasper

2012-01-01T23:59:59.000Z

40

Fabricated Metals (2010 MECS)  

Broader source: Energy.gov [DOE]

Manufacturing Energy and Carbon Footprint for Fabricated Metals Sector (NAICS 332) Energy use data source: 2010 EIA MECS (with adjustments) Footprint Last Revised: February 2014

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

METAL MEDIA FILTERS, AG-1 SECTION FI  

SciTech Connect (OSTI)

One application of metal media filters is in various nuclear air cleaning processes including applications for protecting workers, the public and the environment from hazardous and radioactive particles. To support this application the development of the ASME AG-1 FI Standard on Metal Media has been under way for more than ten years. Development of the proposed section has required resolving several difficult issues associated with operating conditions (media velocity, pressure drop, etc.), qualification testing, and quality acceptance testing. Performance characteristics of metal media are dramatically different than the glass fiber media with respect to parameters like differential pressures, operating temperatures, media strength, etc. These differences make existing data for a glass fiber media inadequate for qualifying a metal media filter for AG-1. In the past much work has been conducted on metal media filters at facilities such as Lawrence Livermore National Laboratory (LLNL) and Savannah River National Laboratory (SRNL) to qualify the media as High Efficiency Particulate Air (HEPA) Filters. Particle retention testing has been conducted at Oak Ridge Filter Test Facility and at Air Techniques International (ATI) to prove that the metal media meets or exceeds the 99.97% particle retention required for a HEPA Filter. Even with his testing, data was lacking to complete an AG-1 FI Standard on metal media. With funding secured by Mississippi State University (MSU) from National Nuclear Security Administration (NNSA), a research test stand is being designed and fabricated at MSU's Institute for Clean Energy Technology (ICET) Facility to obtain qualification data on metal media. This in turn will support required data needed for the FI Standard. The paper will discuss in detail how the test stand at MSU will obtain the necessary data to complete the FI Standard.

Adamson, D.

2012-05-23T23:59:59.000Z

42

Remotely serviced filter and housing  

DOE Patents [OSTI]

A filter system for a hot cell comprises a housing adapted for input of air or other gas to be filtered, flow of the air through a filter element, and exit of filtered air. The housing is tapered at the top to make it easy to insert a filter cartridge using an overhead crane. The filter cartridge holds the filter element while the air or other gas is passed through the filter element. Captive bolts in trunnion nuts are readily operated by electromechanical manipulators operating power wrenches to secure and release the filter cartridge. The filter cartridge is adapted to make it easy to change a filter element by using a master-slave manipulator at a shielded window station.

Ross, Maurice J. (Pocatello, ID); Zaladonis, Larry A. (Idaho Falls, ID)

1988-09-27T23:59:59.000Z

43

Hacks and Filters  

Science Journals Connector (OSTI)

In this chapter you have learned that hacks and filters can be an important weapon ... in any CSS developer’s arsenal. However, hacks need to be used sparingly, and preferably ... resort. If you do need to use hacks

2006-01-01T23:59:59.000Z

44

M. A. Abdelmoneum, M. U. Demirci, S.-S. Li, and C. T.-C. Nguyen, "Post-fabrication laser trimming of micromechanical filters," Technical Digest, IEEE Int. Electron Devices Mtg., San Francisco, California, Dec. 13-15, 2004, pp. 39-42.  

E-Print Network [OSTI]

of micromechanical filters," Technical Digest, IEEE Int. Electron Devices Mtg., San Francisco, California, Dec. 13 absolute and matching tolerances in planar processes, this trim procedure might eventually be instrumental

Nguyen, Clark T.-C.

45

Sampled data lattice filters  

E-Print Network [OSTI]

SAMPLED DATA LATTICE FILTERS A Thesis by WILLIAM TERRY THRIFT III Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE December 1979 Major Subfect...: Electrical Engineering SAMPLED DATA LATTICE FILTERS A Thesis by WILLIAM TERRY THRIFT III Approved as to style and content by: (Chair an of Committee) (Hea f Department) (Member) (Member) (Member) (Member) December 1979 ABSTRACT Sampled Data...

Thrift, William Terry

2012-06-07T23:59:59.000Z

46

Kalman Filtering Jur van den Berg  

E-Print Network [OSTI]

Kalman Filtering Jur van den Berg #12;Kalman Filtering · (Optimal) estimation of the (hidden) state

van den Berg, Jur

47

Materials for freeform fabrication of GHz tunable dielectric photonic crystals.  

SciTech Connect (OSTI)

Photonic crystals are of interest for GHz transmission applications, including rapid switching, GHz filters, and phased-array technology. 3D fabrication by Robocasting enables moldless printing of high solid loading slurries into structures such as the ''woodpile'' structures used to fabricate dielectric photonic band gap crystals. In this work, tunable dielectric materials were developed and printed into woodpile structures via solid freeform fabrication (SFF) toward demonstration of tunable photonic crystals. Barium strontium titanate ceramics possess interesting electrical properties including high permittivity, low loss, and high tunability. This paper discusses the processing route and dielectric characterization of (BaxSr1-XTiO3):MgO ceramic composites, toward fabrication of tunable dielectric photonic band gap crystals.

Niehaus, Michael Keith; Lewis, Jennifer A. (University of Illinois, Urbana, IL); Smay, James Earl; Clem, Paul Gilbert; Lin, Shawn-Yu; Cesarano, Joseph, III (,; ); Carroll, James F.

2003-01-01T23:59:59.000Z

48

Remotely serviced filter and housing  

DOE Patents [OSTI]

A filter system for a hot cell comprises a housing adapted for input of air or other gas to be filtered, flow of the air through a filter element, and exit of filtered air. The housing is tapered at the top to make it easy to insert a filter cartridge holds the filter element while the air or other gas is passed through the filter element. Captive bolts in trunnion nuts are readily operated by electromechanical manipulators operating power wrenches to secure and release the filter cartridge. The filter cartridge is adapted to make it easy to change a filter element by using a master-slave manipulator at a shielded window station. 6 figs.

Ross, M.J.; Zaladonis, L.A.

1987-07-22T23:59:59.000Z

49

Filters for cathodic arc plasmas  

DOE Patents [OSTI]

Cathodic arc plasmas are contaminated with macroparticles. A variety of magnetic plasma filters has been used with various success in removing the macroparticles from the plasma. An open-architecture, bent solenoid filter, with additional field coils at the filter entrance and exit, improves macroparticle filtering. In particular, a double-bent filter that is twisted out of plane forms a very compact and efficient filter. The coil turns further have a flat cross-section to promote macroparticle reflection out of the filter volume. An output conditioning system formed of an expander coil, a straightener coil, and a homogenizer, may be used with the magnetic filter for expanding the filtered plasma beam to cover a larger area of the target. A cathodic arc plasma deposition system using this filter can be used for the deposition of ultrathin amorphous hard carbon (a-C) films for the magnetic storage industry.

Anders, Andre (Albany, CA); MacGill, Robert A. (Richmond, CA); Bilek, Marcela M. M. (Engadine, AU); Brown, Ian G. (Berkeley, CA)

2002-01-01T23:59:59.000Z

50

Biologically inspired digital fabrication  

E-Print Network [OSTI]

Objects and systems in nature are models for the practice of sustainable design and fabrication. From trees to bones, natural systems are characterized by the constant interplay of creation, environmental response, and ...

Han, Sarah (Sarah J.)

2013-01-01T23:59:59.000Z

51

Fabricated torque shaft  

DOE Patents [OSTI]

A fabricated torque shaft is provided that features a bolt-together design to allow vane schedule revisions with minimal hardware cost. The bolt-together design further facilitates on-site vane schedule revisions with parts that are comparatively small. The fabricated torque shaft also accommodates stage schedules that are different one from another in non-linear inter-relationships as well as non-linear schedules for a particular stage of vanes.

Mashey, Thomas Charles (Anderson, SC)

2002-01-01T23:59:59.000Z

52

Nuclear Fabrication Consortium  

SciTech Connect (OSTI)

This report summarizes the activities undertaken by EWI while under contract from the Department of Energy (DOE) � Office of Nuclear Energy (NE) for the management and operation of the Nuclear Fabrication Consortium (NFC). The NFC was established by EWI to independently develop, evaluate, and deploy fabrication approaches and data that support the re-establishment of the U.S. nuclear industry: ensuring that the supply chain will be competitive on a global stage, enabling more cost-effective and reliable nuclear power in a carbon constrained environment. The NFC provided a forum for member original equipment manufactures (OEM), fabricators, manufacturers, and materials suppliers to effectively engage with each other and rebuild the capacity of this supply chain by : � Identifying and removing impediments to the implementation of new construction and fabrication techniques and approaches for nuclear equipment, including system components and nuclear plants. � Providing and facilitating detailed scientific-based studies on new approaches and technologies that will have positive impacts on the cost of building of nuclear plants. � Analyzing and disseminating information about future nuclear fabrication technologies and how they could impact the North American and the International Nuclear Marketplace. � Facilitating dialog and initiate alignment among fabricators, owners, trade associations, and government agencies. � Supporting industry in helping to create a larger qualified nuclear supplier network. � Acting as an unbiased technology resource to evaluate, develop, and demonstrate new manufacturing technologies. � Creating welder and inspector training programs to help enable the necessary workforce for the upcoming construction work. � Serving as a focal point for technology, policy, and politically interested parties to share ideas and concepts associated with fabrication across the nuclear industry. The report the objectives and summaries of the Nuclear Fabrication Consortium projects. Full technical reports for each of the projects have been submitted as well.

Levesque, Stephen

2013-04-05T23:59:59.000Z

53

Three-Dimensional Homogeneous Ferrite-Carbon Aerogel: One Pot Fabrication and Enhanced Electro-Fenton Reactivity  

Science Journals Connector (OSTI)

Three-Dimensional Homogeneous Ferrite-Carbon Aerogel: One Pot Fabrication and Enhanced Electro-Fenton Reactivity ... Before analysis, all samples withdrawn from treated solutions were filtered with 0.45 ?m PTFE filters. ... Doped Carbon Nanotube Networks for Electrochemical Filtration of Aqueous Phenol: Electrolyte Precipitation and Phenol Polymerization ...

Yujing Wang; Guohua Zhao; Shouning Chai; Hongying Zhao; Yanbin Wang

2012-12-31T23:59:59.000Z

54

High Efficiency Particulate Air Filters  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

High Efficiency Particulate Air (HEPA) Filters High Efficiency Particulate Air (HEPA) Filters Home Standards DOE Workshops Nuclear Air Cleaning Conference Proceedings Qualified Filter List News Items Related Sites HEPA Related Lessons Learned Contact Us HSS Logo High Efficiency Particulate Air Filters The HEPA Filter web site provides a forum for informing and reporting department-wide activities related to filtration and ventilation issues with special reference to the High Efficiency Particulate Air (HEPA) Filters' use, inspection, and testing. This site contains essentials of DOE HEPA filter test program, procedures, requirements and quality assurance aspects applicable to HEPA filters used in DOE facilities. This site contains information about the DOE-accepted Filter Test Facility and its management, operation and quality assuranceprogram.

55

Career Map: Assembler and Fabricator  

Broader source: Energy.gov [DOE]

The Wind Program's Career Map provides job description information for Assembler and Fabricator positions.

56

Rotating drum filter  

DOE Patents [OSTI]

A perforated drum (10) rotates in a coaxial cylindrical housing (18) having three circumferential ports (19,22,23), and an axial outlet (24) at one end. The axis (11) is horizontal. A fibrous filter medium (20) is fed through a port (19) on or near the top of the housing (81) by a distributing mechanism (36) which lays a uniform mat (26) of the desired thickness onto the rotating drum (10). This mat (26) is carried by the drum (10) to a second port (23) through which dirty fluid (13) enters. The fluid (13) passes through the filter (26) and the cleaned stream (16) exits through the open end (15) of the drum (10) and the axial port (24) in the housing (18). The dirty filter material (20) is carried on to a third port (22) near the bottom of the housing (18) and drops into a receiver (31) from which it is continuously removed, cleaned (30), and returned (32) to the charging port (36) at the top. To support the filter mat, the perforated cylinder may carry a series of tines (40), shaped blades (41), or pockets, so that the mat (26) will not fall from the drum (10) prematurely. To minimize risk of mat failure, the fluid inlet port (23) may be located above the horizontal centerline (11).

Anson, Donald (Worthington, OH)

1990-01-01T23:59:59.000Z

57

Ozone decomposing filter  

DOE Patents [OSTI]

In an improved ozone decomposing air filter carbon fibers are held together with a carbonized binder in a perforated structure. The structure is made by combining rayon fibers with gelatin, forming the mixture in a mold, freeze-drying, and vacuum baking.

Simandl, Ronald F. (Farragut, TN); Brown, John D. (Harriman, TN); Whinnery, Jr., LeRoy L. (Dublin, CA)

1999-01-01T23:59:59.000Z

58

Ceramic HEPA Filter Program  

SciTech Connect (OSTI)

Potential benefits of ceramic filters in nuclear facilities: (1) Short term benefit for DOE, NRC, and industry - (a) CalPoly HTTU provides unique testing capability to answer questions for DOE - High temperature testing of materials, components, filter, (b) Several DNFSB correspondences and presentations by DNFSB members have highlighted the need for HEPA filter R and D - DNFSB Recommendation 2009-2 highlighted a nuclear facility response to an evaluation basis earthquake followed by a fire (aka shake-n-bake) and CalPoly has capability for a shake-n-bake test; (2) Intermediate term benefit for DOE and industry - (a) Filtration for specialty applications, e.g., explosive applications at Nevada, (b) Spin-off technologies applicable to other commercial industries; and (3) Long term benefit for DOE, NRC, and industry - (a) Across industry, strong desire for better performance filter, (b) Engineering solution to safety problem will improve facility safety and decrease dependence on associated support systems, (c) Large potential life-cycle cost savings, and (d) Facilitates development and deployment of LLNL process innovations to allow continuous ventilation system operation during a fire.

Mitchell, M A; Bergman, W; Haslam, J; Brown, E P; Sawyer, S; Beaulieu, R; Althouse, P; Meike, A

2012-04-30T23:59:59.000Z

59

MOX Fabrication Isolation Considerations  

SciTech Connect (OSTI)

This document provides a technical position on the preferred level of isolation to fabricate demonstration quantities of mixed oxide transmutation fuels. The Advanced Fuel Cycle Initiative should design and construct automated glovebox fabrication lines for this purpose. This level of isolation adequately protects the health and safety of workers and the general public for all mixed oxide (and other transmutation fuel) manufacturing efforts while retaining flexibility, allowing parallel development and setup, and minimizing capital expense. The basis regulations, issues, and advantages/disadvantages of five potential forms of isolation are summarized here as justification for selection of the preferred technical position.

Eric L. Shaber; Bradley J Schrader

2005-08-01T23:59:59.000Z

60

Covering Walls With Fabrics.  

E-Print Network [OSTI]

the glue a dull surface to adhere to. Fill any gouges or nail holes with patching plaster and sand smooth after they have dried thoroughly. Minor ripples can be covered with spackling compound, a plaster-like substance that is spread thinly... during dry weather and in a well-ventilated room. Cut each panel 3 inches longer than the ceiling height. Match and cut sufficient fabric widths to cover completely one wall at a time. Start with Corner I nstall the first fabric panel so...

Anonymous,

1979-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Preserving the legacy: Physical treatment technologies (Ptl0201). Audiovisual  

SciTech Connect (OSTI)

Survey includes deep, dual bed, and belt filters; baghouses; centrifuges; distillation; reverse osmosis; microfiltration; flocculation; evaporation and settling ponds; air stripping; electrostatic precipitation; and adsorption.

NONE

1996-12-31T23:59:59.000Z

62

The Magnetic Centrifugal Mass Filter  

SciTech Connect (OSTI)

Mass filters using rotating plasmas have been considered for separating nuclear waste and spent nuclear fuel. We propose a new mass filter that utilizes centrifugal and magnetic confinement of ions in a way similar to the asymmetric centrifugal trap. This magnetic centrifugal mass filter is shown to be more proliferation resistant than present technology. This filter is collisional and produces well confined output streams, among other advantages. __________________________________________________

Abraham J. Fetterman and Nathaniel J. Fisch

2011-08-04T23:59:59.000Z

63

Lithographic fabrication of nanoapertures  

DOE Patents [OSTI]

A new class of silicon-based lithographically defined nanoapertures and processes for their fabrication using conventional silicon microprocessing technology have been invented. The new ability to create and control such structures should significantly extend our ability to design and implement chemically selective devices and processes.

Fleming, James G. (Albuquerque, NM)

2003-01-01T23:59:59.000Z

64

Nuclear Spin Filter  

Science Journals Connector (OSTI)

A "spin filter" for selecting metastable hydrogen, deuterium, or tritium atoms with a given nuclear spin magnetic quantum number (mI) has been built and tested. With the device installed in the Los Alamos "Lamb-shift" polarized-ion source, we have obtained a deuterium negative-ion beam with ? 55% spin-state purity for mI=1, 0, or -1. An improved magnetic field homogeneity in the apparatus is expected to increase the purity to ? 75%.

Joseph L. McKibben; George P. Lawrence; Gerald G. Ohlsen

1968-05-20T23:59:59.000Z

65

Filter Press Building  

E-Print Network [OSTI]

"FILTER PRESS BUILDING" AVON LAKE WATER POLLUTION CONTROL CENTER HEAT PUMP HEATING AND COOLING SYSTEM William M. Bush, P.E. The Cleveland Electric Illuminating Company Cleveland, Ohio ABSTRACT The high heat value of the plant's treated wa..." of the thousands of homes in the com munity, we were able to recommend a system of heat recovery refrigeration cycles that would provide space conditioning at a fraction of the cost of natural gas. The all-electric recommendation was accepted because...

Bush, W. M.

66

Electrically-Assisted Diesel Particulate Filter Regeneration...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications Substrate Studies of an Electrically-Assisted Diesel Particulate Filter Electrically-Assisted Diesel Particulate Filter Regeneration...

67

Secondary Pollutants from Ozone Reaction with Ventilation Filters and Degradation of Filter Media Additives  

E-Print Network [OSTI]

2007. Ozone removal by HVAC filters. Atmospheric Environmentozone reactions on HVAC filters cannot be ignored as aof pollutants from HVAC filters may be degradation of

Destaillats, Hugo

2012-01-01T23:59:59.000Z

68

Carbon Nanotubes Based Nanoelectrode Arrays: Fabrication, Evaluation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Arrays: Fabrication, Evaluation and Application in Voltammetric Analysis. Carbon Nanotubes Based Nanoelectrode Arrays: Fabrication, Evaluation and Application in Voltammetric...

69

Ozone removal by HVAC filters  

Science Journals Connector (OSTI)

Residential and commercial HVAC filters that have been loaded with particles during operation in the field can remove ozone from intake or recirculated air. However, knowledge of the relative importance of HVAC filters as a removal mechanism for ozone in residential and commercial buildings is incomplete. We measured the ozone removal efficiencies of clean (unused) fiberglass, clean synthetic filters, and field-loaded residential and commercial filters in a controlled laboratory setting. For most filters, the ozone removal efficiency declined rapidly but converged to a non-zero (steady-state) value. This steady-state ozone removal efficiency varied from 0% to 9% for clean filters. The mean steady-state ozone removal efficiencies for loaded residential and commercial filters were 10% and 41%, respectively. Repeated exposure of filters to ozone following a 24-h period of no exposure led to a regeneration of ozone removal efficiency. Based on a theoretical scaling analysis of mechanisms that are involved in the ozone removal process, we speculate that the steady-state ozone removal efficiency is limited by reactant diffusion out of particles, and that regeneration is due to internal diffusion of reactive species to sites available to ozone for reaction. Finally, by applying our results to a screening model for typical residential and commercial buildings, HVAC filters were estimated to contribute 22% and 95%, respectively, of total ozone removal in HVAC systems.

P. Zhao; J.A. Siegel; R.L. Corsi

2007-01-01T23:59:59.000Z

70

Abstract--A low noise optical sensor and biocompatible microscale optical filters for integrated fluorescence sensors  

E-Print Network [OSTI]

Abstract--A low noise optical sensor and biocompatible microscale optical filters for integrated fluorescence sensors were developed and tested. The sensor was fabricated in a 0.5 µm CMOS process. The measured reset noise of the sensor is reduced by a factor of 10 compared to conventional active pixel

Maryland at College Park, University of

71

Intraocular lens fabrication  

DOE Patents [OSTI]

This invention describes a method for fabricating an intraocular lens made from clear Teflon{trademark}, Mylar{trademark}, or other thermoplastic material having a thickness of about 0.025 millimeters. These plastic materials are thermoformable and biocompatable with the human eye. The two shaped lenses are bonded together with a variety of procedures which may include thermosetting and solvent based adhesives, laser and impulse welding, and ultrasonic bonding. The fill tube, which is used to inject a refractive filling material is formed with the lens so as not to damage the lens shape. A hypodermic tube may be included inside the fill tube. 13 figs.

Salazar, M.A.; Foreman, L.R.

1997-07-08T23:59:59.000Z

72

Intraocular lens fabrication  

DOE Patents [OSTI]

This invention describes a method for fabricating an intraocular lens made rom clear Teflon.TM., Mylar.TM., or other thermoplastic material having a thickness of about 0.025 millimeters. These plastic materials are thermoformable and biocompatable with the human eye. The two shaped lenses are bonded together with a variety of procedures which may include thermosetting and solvent based adhesives, laser and impulse welding, and ultrasonic bonding. The fill tube, which is used to inject a refractive filling material is formed with the lens so as not to damage the lens shape. A hypodermic tube may be included inside the fill tube.

Salazar, Mike A. (Albuquerque, NM); Foreman, Larry R. (Los Alamos, NM)

1997-01-01T23:59:59.000Z

73

Perceptual improvement of Wiener filtering employing a post-filter  

Science Journals Connector (OSTI)

A major drawback of many speech enhancement methods in speech applications is the generation of an annoying residual noise with musical character. Although the Wiener filter introduces less musical noise than spectral subtraction methods, such noise, ... Keywords: MMSE, Modified masking threshold, Musical critical band, Perceptual post-filter, Speech enhancement

Md. Jahangir Alam; Douglas O'Shaughnessy

2011-01-01T23:59:59.000Z

74

Solid colloidal optical wavelength filter  

DOE Patents [OSTI]

A solid colloidal optical wavelength filter includes a suspension of spheal particles dispersed in a coagulable medium such as a setting plastic. The filter is formed by suspending spherical particles in a coagulable medium; agitating the particles and coagulable medium to produce an emulsion of particles suspended in the coagulable medium; and allowing the coagulable medium and suspended emulsion of particles to cool.

Alvarez, Joseph L. (Boulder, CO)

1992-01-01T23:59:59.000Z

75

Advanced hot-gas filter development. Topical report, September 30, 1994--May 31, 1996  

SciTech Connect (OSTI)

The application of high-performance, high-temperature particulate control devices is considered to be beneficial to advanced fossil fuel processing technology, to selected high-temperature industrial processes, and to waste incineration concepts. Ceramic rigid filters represent the most attractive technology for these applications due to their capability to withstand high-temperature corrosive environments. However, current generation monolithic filters have demonstrated poor resistance to crack propagation and can experience catastrophic failure during use. To address this problem, ceramic fiber-reinforced ceramic matrix composite (CMC) filter materials are needed for reliable damage tolerant candle filters. This program is focused on the development of an oxide-fiber reinforced oxide material composite filter material that is cost competitive with prototype next generation filters. This goal would be achieved through the development of a low cost sol-gel fabrication process and a three-dimensional fiber architecture optimized for high volume filter manufacturing. The 3D continuous fiber reinforcement provides a damage tolerant structure which is not subject to delamination-type failures. This report documents the Phase 1, Filter Material Development and Evaluation, results. Section 2 provides a program summary. Technical results, including experimental procedures, are presented and discussed in Section 3. Section 4 and 5 provide the Phase 1 conclusions and recommendations, respectively. The remaining sections cover acknowledgements and references.

Lane, J.E.; LeCostaouec, J.F.; Painter, C.J.; Sue, W.A.; Radford, K.C.

1996-12-31T23:59:59.000Z

76

Backpulse and filter feed velocity effects on Norton filter performance  

SciTech Connect (OSTI)

A series of tests have been conducted using the 2.2 ft{sup 2} Norton filter to solve the fouling problems observed with the ETF Norton system. The objective of these tests was to determine filter efficiency as a function of backpulse strength and feed velocity. Based on experimental results, it is recommend that the filters should be operated at the following conditions: (1) Backpulse Transmembrane Pressure/FeedTransmembrane Pressure (BP/FP) > 1.5, preferably 2 or 3. (2) Feed crossflow velocity = 6--8 f/s. It is expected that operation at these conditions should improve performance by 30--60%.

Siler, J.L.

1990-05-08T23:59:59.000Z

77

Pleated Ceramic Fiber Diesel Particulate Filter | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Pleated Ceramic Fiber Diesel Particulate Filter Pleated Ceramic Fiber Diesel Particulate Filter 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters...

78

A Framework for Nonlinear Filtering in MATLAB.  

E-Print Network [OSTI]

?? The object of this thesis is to provide a MATLAB framework for nonlinear filtering in general, and particle filtering in particular. This is done… (more)

Rosén, Jakob

2005-01-01T23:59:59.000Z

79

Catalytic Filter for Diesel Exhaust Purification | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Filter for Diesel Exhaust Purification This project is developing a precious metal-free passive diesel particulate filter. deer09fokema.pdf More Documents & Publications...

80

Nuclear Filter Technology | Open Energy Information  

Open Energy Info (EERE)

Filter Technology Jump to: navigation, search Name: Nuclear Filter Technology Place: Golden, CO Information About Partnership with NREL Partnership with NREL Yes Partnership Type...

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Corrosion of silicon carbide hot gas filter candles in gasification environment  

Science Journals Connector (OSTI)

Abstract Reliable cleaning of the fuel gas is required to meet the environmental regulations and to prevent corrosion and erosion of downstream components. The aggressive process environment in biomass-gasification power generation systems or in biofuels production systems can cause corrosion in ceramic hot gas filter candles used to clean the fuel gas. Therefore, to improve the reliability and durability of filters, the influence of steam, ash, and alkaline (earth) metals on the corrosion processes was studied for silicon carbide filter candles fabricated by Pall Schumacher. Exposures with biomass and lignite ashes caused a macroscopically expansion as well as microstructural effects that were analysed by X-ray diffraction (XRD) and energy dispersive X-ray (EDX) spectroscopy. All effects are discussed and it is shown that the employment of silicon carbide filter candles in water vapour containing, alkali-rich gasification environment at high temperature is problematic.

Sarah Schaafhausen; Elena Yazhenskikh; Steffen Heidenreich; Michael Müller

2014-01-01T23:59:59.000Z

82

NETL: Control Technology: Advanced Hybrid Particulate Collector  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Advanced Hybrid Particulate Collector Advanced Hybrid Particulate Collector Under DOE-NETL sponsorship, the University of North Dakota, Energy and Environmental Research Center (UND-EERC) has developed a new concept in particulate control, called an advanced hybrid particulate collector (AHPC). In addition to DOE and the EERC, the project team includes W.L. Gore & Associates, Inc., Allied Environmental Technologies, Inc., and the Otter Tail Power Company. The AHPC utilizes both electrostatic collection and filtration in a unique geometric configuration that achieves ultrahigh particle collection with much less collection area than conventional particulate control devices. The primary technologies for state-of-the-art particulate control are fabric filters (baghouses) and electrostatic precipitators (ESPs). A major limitation of ESPs is that the fractional penetration of 0.1- to 1.0-µm particles is typically at least an order of magnitude greater than for 10-µm particles, so a situation exists where the particles that are of greatest health concern are collected with the lowest efficiency. Fabric filters are currently considered to be the best available control technology for fine particles, but emissions are dependent on ash properties and typically increase if the air-to-cloth (A/C) ratio is increased. In addition, many fabrics cannot withstand the rigors of high-SO2 flue gases, which are typical for bituminous fuels. Fabric filters may also have problems with bag cleanability and high pressure drop, which has resulted in conservatively designed, large, costly baghouses.

83

Water washable stainless steel HEPA filter  

DOE Patents [OSTI]

The invention is a high efficiency particulate (HEPA) filter apparatus and system, and method for assaying particulates. The HEPA filter provides for capture of 99.99% or greater of particulates from a gas stream, with collection of particulates on the surface of the filter media. The invention provides a filter system that can be cleaned and regenerated in situ.

Phillips, Terrance D. (617 Chestnut Ct., Aiken, SC 29803)

2001-01-01T23:59:59.000Z

84

Document Filtering With Inference Networks Jamie Callan  

E-Print Network [OSTI]

Document Filtering With Inference Networks Jamie Callan Computer Science Department University document filtering. The prob­ lems of document retrieval and document filtering are sim­ ilar of the infor­ mation available, are all different. This paper describes a new statistical document filtering

Callan, Jamie

85

Micro-optic fabrication with subdomain masking  

Science Journals Connector (OSTI)

An innovative fabrication technique is introduced that is based on multiple-exposure techniques for micro-optics fabrication. This approach is compatible with conventional lithography...

Pitchumani, Mahesh; Brown, Jeremiah; Mohammed, Waleed; Johnson, Eric G

2004-01-01T23:59:59.000Z

86

Enforcement Letter, Parsons Technology Development & Fabrication...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Technology Development & Fabrication Complex - April 13, 2010 Enforcement Letter, Parsons Technology Development & Fabrication Complex - April 13, 2010 April 13, 2010 Issued to...

87

Spatial filters for high power lasers  

DOE Patents [OSTI]

A spatial filter includes a first filter element and a second filter element overlapping with the first filter element. The first filter element includes a first pair of cylindrical lenses separated by a first distance. Each of the first pair of cylindrical lenses has a first focal length. The first filter element also includes a first longitudinal slit filter positioned between the first pair of cylindrical lenses. The second filter element includes a second pair of cylindrical lenses separated by a second distance. Each of the second pair of cylindrical lenses has a second focal length. The second filter element also includes a second longitudinal slit filter positioned between the second pair of cylindrical lenses.

Erlandson, Alvin Charles; Bayramian, Andrew James

2014-12-02T23:59:59.000Z

88

Digital materials for digital fabrication  

E-Print Network [OSTI]

This thesis introduces digital materials by analogy with digital computation and digital communications. Traditional fabrication techniques include pick-and-place, roll-to-roll, molding, patterning and more. Current research ...

Popescu, George A

2007-01-01T23:59:59.000Z

89

Active dc filter for HVDC systems  

SciTech Connect (OSTI)

This article is a case history of the installation of active dc filters for high-performance, low-cost harmonics filtering at the Lindome converter station in the Konti-Skan 2 HVDC transmission link between Denmark and Sweden. The topics of the article include harmonics, interference, and filters, Lindome active dc filter, active dc filter design, digital signal processor, control scheme, protection and fault monitoring, and future applications.

Zhang, W. (Royal Inst. of Tech., Stockholm (Sweden)); Asplund, G.

1994-01-01T23:59:59.000Z

90

Filter systems for IGCC applications  

SciTech Connect (OSTI)

The objectives of this program were to identify metallic filter medium to be utilized in the Integrated Gasification Combined Cycle process (IGCC). In IGCC processes utilizing high efficiency desulfurizing technology, the traditional corrosion attack, sulfidation, is minimized so that metallic filters are viable alternatives over ceramic filters. Tampa Electric Company`s Polk Power Station is being developed to demonstrate Integrated Gasification Combined Cycle technology. The Pall Gas Solid Separation (GSS) System is a self cleaning filtration system designed to remove virtually all particulate matter from gas streams. The heart of the system is the filter medium used to collect the particles on the filter surface. The medium`s filtration efficiency, uniformity, permeability, voids volume, and surface characteristics are all important to establishing a permeable permanent cake. In-house laboratory blowback tests, using representative full scale system particulate, were used to confirm the medium selection for this project. Test elements constructed from six alloys were supplied for exposure tests: PSS 310SC (modified 310S alloy); PSS 310SC heat treated; PSS 310SC-high Cr; PSS 310SC-high Cr heat treated; PSS Hastelloy X; and PSS Hastelloy X heat treated.

Bevan, S.; Gieger, R.; Sobel, N.; Johnson, D.

1995-11-01T23:59:59.000Z

91

Laboratory Testing of the Boundary Layer Momentum Transfer Rotational Filter Systems, NETL-Innovatech, Inc., CRADA 98-F026, Final Report  

SciTech Connect (OSTI)

A patented dynamic mechanical filter developed by InnovaTech was previously shown to remove fine particulate matter from industrial process gas streams at ambient temperatures and pressures. An all-metal, high-temperature version of this novel media-less filter was fabricated under this Cooperative Research and Development Agreement (CRADA) with DOE/NETL-Morgantown for hot gas testing of the device. The technology is entirely different in both concept and design from conventional vortex separators, cyclones, or porous media filters. This new filtration concept is capable of separating heavy loading of fine particles without blinding, fouling or bridging, and would require minimal operational costs over its anticipated multi-year service life. The all-metal filter design eliminates thermal stress cracking and premature failure prevalent in conventional porous ceramic filters. In contrast, conventional porous media filters (i.e., ceramic cross-flow or candles) easily foul, require periodic cleaning (typically backpulsing), frequent replacement and subsequent disposal.

National Energy Technology Laboratory

2000-08-22T23:59:59.000Z

92

Electric filter with movable belt electrode  

DOE Patents [OSTI]

A method and apparatus for removing airborne contaminants entrained in a gas or airstream includes an electric filter characterized by a movable endless belt electrode, a grounded electrode, and a filter medium sandwiched there between. Inclusion of the movable, endless belt electrode provides the driving force for advancing the filter medium through the filter, and reduces frictional drag on the filter medium, thereby permitting a wide choice of filter medium materials. Additionally, the belt electrode includes a plurality of pleats in order to provide maximum surface area on which to collect airborne contaminants. 4 figs.

Bergman, W.

1983-09-20T23:59:59.000Z

93

Cordierite silicon nitride filters. Final report  

SciTech Connect (OSTI)

The objective of this project was to develop a silicon nitride based crossflow filter. This report summarizes the findings and results of the project. The project was phased with Phase I consisting of filter material development and crossflow filter design. Phase II involved filter manufacturing, filter testing under simulated conditions and reporting the results. In Phase I, Cordierite Silicon Nitride (CSN) was developed and tested for permeability and strength. Target values for each of these parameters were established early in the program. The values were met by the material development effort in Phase I. The crossflow filter design effort proceeded by developing a macroscopic design based on required surface area and estimated stresses. Then the thermal and pressure stresses were estimated using finite element analysis. In Phase II of this program, the filter manufacturing technique was developed, and the manufactured filters were tested. The technique developed involved press-bonding extruded tiles to form a filter, producing a monolithic filter after sintering. Filters manufactured using this technique were tested at Acurex and at the Westinghouse Science and Technology Center. The filters did not delaminate during testing and operated and high collection efficiency and good cleanability. Further development in areas of sintering and filter design is recommended.

Sawyer, J.; Buchan, B. [Acurex Environmental Corp., Mountain View, CA (United States); Duiven, R.; Berger, M. [Aerotherm Corp., Mountain View, CA (United States); Cleveland, J.; Ferri, J. [GTE Products Corp., Towanda, PA (United States)

1992-02-01T23:59:59.000Z

94

Improving Filtering for Computer Graphics  

E-Print Network [OSTI]

When drawing images onto a computer screen, the information in the scene is typically more detailed than can be displayed. Most objects, however, will not be close to the camera, so details have to be filtered out, or anti-aliased, when the objects...

Manson, Josiah

2014-04-30T23:59:59.000Z

95

Are Ventilation Filters Degrading Indoor Air Quality in California Classrooms?  

E-Print Network [OSTI]

2007) “Ozone Removal by HVAC Filters. ” Atmos.  Environ.  HVAC filters  ozone deposition in  HVAC filters and byproduct formation, 

Fisk, Michael G. Apte and William J.

2009-01-01T23:59:59.000Z

96

System Effects of High Efficiency Filters in Homes  

E-Print Network [OSTI]

FIELD TESTING OF FILTER IMPACTS ON HVAC SYSTEM PERFORMANCEof Filters in Residential and Light-Commercial HVAC systems.HVAC system performance changes with different MERV filters

Walker, Iain S.

2014-01-01T23:59:59.000Z

97

Koch Filter and DOW Teaming Profile  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Koch Filter Corporation Dow Chemical Koch Filter Corporation Dow Chemical 4411-A Darien Street 2301 Brazosport Boulevard Houston, TX 77028 Freeport, TX 77541 Business: HVAC Filter Manufacturer Business: Chemical Manufacturer Bob Sheppard John Theile Regional Sales Manager Reliability Engineer Phone: 713-672-6550 Phone: 979-238-1894 Email: bobs@kochfilter.com Email: jptheile@dow.com Koch Filter saves Dow $156,000 by improving air flow to turbines Project Scope Koch Filter Corporation evaluated the turbine operation at a Dow Chemical facility. They determined that the gas turbine's air intake system was undersized and pre-filters had an initial resistance that was too high, causing the turbine to be "starved" for air. Koch replaced these filters with a better filter that

98

Automatic tuning of continuous-time filters  

E-Print Network [OSTI]

Integrated high-Q continuous-time filters require adaptive tuning circuits that will correct the filter parameters such as center frequency and quality factor (Q). Three different automatic tuning techniques are introduced. In all of the proposed...

Sumesaglam, Taner

2004-11-15T23:59:59.000Z

99

Spatial Frequency Filtering Using Nondelineated Thin Films  

Science Journals Connector (OSTI)

We present a new approach for achieving spatial frequency filtering in the analog domain. Our device, the Thin Film Spatial Filter, is a hybrid structure which combines the strengths of analog VLSI technology with the simplicity of a continuous sheet ...

J. Mcelvain; J. Langan; A. J. Heeger

1997-10-01T23:59:59.000Z

100

Waveguide Filter Tutorial Julius O. Smith III  

E-Print Network [OSTI]

Waveguide Filter Tutorial Julius O. Smith III Center for Computer Research in Music and Acoustics was adapted from the conference paper "Waveguide Filter Tutorial," by J.O. Smith, Proceedings

Smith III, Julius Orion

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

An energy recovery filter for HVDC systems  

SciTech Connect (OSTI)

The paper investigates the use of a novel filter arrangement for eliminating harmonic instability. The CIGRE benchmark model is selected as the base system. Presented in the paper is an example of harmonic instability which is first eliminated using a conventional low Q filter. Subsequently an energy recovery filter (ER-filter) replaces the conventional low Q filter. It is shown that the ER-filter provides similar performance with a fraction of the power loss when compared with a low Q filter. The dynamic performance of the ER-filter is also demonstrated via the simulations of system start-up and faults. The tool used for this investigation is an electromagnetic transient simulation program.

Jiang, X.; Gole, A.M. (Univ. of Manitoba, Winnipeg (Canada). Dept. of Electrical and Computer Engineering)

1994-01-01T23:59:59.000Z

102

Fabric composite heat pipe technology development  

SciTech Connect (OSTI)

Testing has been performed on a variety of fabric composite technology feasibility issues. These include an evaluation of the effective radiation heat transfer rate from a heated metallic surface covered by a ceramic fabric with the intent of determining the effective emissivity'' of the combination of materials, studies of the wicking properties of ceramic fabrics, and the construction of fabric composite heat pipes to test their working properties under both steady state and transient conditions. Results of these experiments shown that fabric composite combinations have greatly enhanced effective emissivities'' resulting from the increases surface area of the fabric, ceramic fabrics can work very well as the wick for heat pipes, ceramic fabric heat pipes have been demonstrated to operate under typical space conditions, and large mass reductions are possible by using fabric composite heat pipes for heat rejection radiator systems.

Klein, A.C.; Gulshan-Ara, Z.; Kiestler, W.; Snuggerud, R.; Marks, T.S. (Department of Nuclear Engineering, Oregon State University, Corvallis, Oregon 97331 (United States))

1993-01-10T23:59:59.000Z

103

ELECTROSTATICALLY ENHANCED BARRIER FILTER COLLECTION  

SciTech Connect (OSTI)

This work was performed through the University of North Dakota (UND) Chemical Engineering Department with assistance from UND's Energy & Environmental Research Center. This research was undertaken in response to the U.S. Department of Energy Federal Technology Center Program Solicitation No. DE-PS26-99FT40479, Support of Advanced Coal Research at U.S. Universities and Colleges. Specifically, this research was in support of the UCR Core Program and addressees Topic 1, Improved Hot-Gas Contaminant and Particulate Removal Techniques, introducing an advanced design for particulate removal. Integrated gasification combined cycle (IGCC) offers the potential for very high efficiency and clean electric generation. In IGCC, the product gas from the gasifier needs to be cleaned of particulate matter to avoid erosion and high-temperature corrosion difficulties arising with the turbine blades. Current methods involve cooling the gases to {approx}100 C to condense alkalis and remove sulfur and particulates using conventional scrubber technology. This ''cool'' gas is then directed to a turbine for electric generation. While IGCC has the potential to reach efficiencies of over 50%, the current need to cool the product gas for cleaning prior to firing it in a turbine is keeping IGCC from reaching its full potential. The objective of the current project was to develop a highly reliable particulate collector system that can meet the most stringent turbine requirements and emission standards, can operate at temperatures above 1500 F, is applicable for use with all U.S. coals, is compatible with various sorbent injection schemes for sulfur and alkali control, can be integrated into a variety of configurations for both pressurized gasification and combustion, increases allowable face velocity to reduce filter system capital cost, and is cost-competitive with existing technologies. The collector being developed is a new concept in particulate control called electrostatically enhanced barrier filter collection (EBFC). This concept combines electrostatic precipitation (ESP) with candle filters in a single unit. Similar technology has been recently proven on a commercial scale for atmospheric applications, but needed to be tested at high temperatures and pressures. The synergy obtained by combining the two control technologies into a single system should actually reduce filter system capital and operating costs and make the system more reliable. More specifically, the ESP is expected to significantly reduce candle filter load and also to limit ash reintrainment, allowing for full recovery of baseline pressure drop during backpulsing of the filters.

John Erjavec; Michael D. Mann; Ryan Z. Knutson; Michael L. Swanson; Michael E. Collings

2003-06-01T23:59:59.000Z

104

Ceramic hot-gas filter  

DOE Patents [OSTI]

A ceramic hot-gas candle filter having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during backpulse cleaning and is resistant to chemical degradation at high temperatures.

Connolly, Elizabeth Sokolinski (Wilmington, DE); Forsythe, George Daniel (Landenberg, PA); Domanski, Daniel Matthew (New Castle, DE); Chambers, Jeffrey Allen (Hockessin, DE); Rajendran, Govindasamy Paramasivam (Boothwyn, PA)

1999-01-01T23:59:59.000Z

105

Ceramic hot-gas filter  

DOE Patents [OSTI]

A ceramic hot-gas candle filter is described having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during back pulse cleaning and is resistant to chemical degradation at high temperatures.

Connolly, E.S.; Forsythe, G.D.; Domanski, D.M.; Chambers, J.A.; Rajendran, G.P.

1999-05-11T23:59:59.000Z

106

Full-Scale Cross-Flow Filter Testing in Support of the Salt Waste Processing Facility Design  

SciTech Connect (OSTI)

Parsons and its team members General Atomics and Energy Solutions conducted a series of tests to assess the constructability and performance of the Cross-Flow Filter (CFF) system specified for the Department of Energy (DOE) Salt Waste Processing Facility (SWPF). The testing determined the optimum flow rates, operating pressures, filtrate-flow control techniques, and cycle timing for filter back pulse and chemical cleaning. Results have verified the design assumptions made and have confirmed the suitability of cross-flow filtration for use in the SWPF. In conclusion: The CFF Test Program demonstrated that the SWPF CFF system could be successfully fabricated, that the SWPF CFF design assumptions were conservative with respect to filter performance and provided useful information on operational parameters and techniques. The filter system demonstrated performance in excess of expectations. (authors)

Stephens, A.B.; Gallego, R.M. [General Atomics, San Diego, CA (United States); Singer, S.A.; Swanson, B.L. [Energy Solutions, Aiken, SC (United States); Bartling, K. [Parsons, Aiken, SC (United States)

2008-07-01T23:59:59.000Z

107

Ozone Removal by Filters Containing Activated Carbon: A Pilot Study  

E-Print Network [OSTI]

used as the only filter in a HVAC system, in this buildingair conditioning (HVAC) system. Filters containing 300 g of

Fisk, William

2012-01-01T23:59:59.000Z

108

Filter for isotopic alteration of mercury vapor  

DOE Patents [OSTI]

A filter for enriching the .sup.196 Hg content of mercury, including a reactor, a low pressure electric discharge lamp containing a fill of mercury and an inert gas. A filter is arranged concentrically around the lamp. The reactor is arranged around said filter, whereby radiation from said lamp passes through the filter and into said reactor. The lamp, the filter and the reactor are formed of quartz, and are transparent to ultraviolet light. The .sup.196 Hg concentration in the mercury fill is less than that which is present in naturally occurring mercury, that is less than about 0.146 atomic weight percent. Hydrogen is also included in the fill and serves as a quenching gas in the filter, the hydrogen also serving to prevent disposition of a dark coating on the interior of the filter.

Grossman, Mark W. (Belmont, MA); George, William A. (Gloucestor, MA)

1989-01-01T23:59:59.000Z

109

Filter for isotopic alteration of mercury vapor  

DOE Patents [OSTI]

A filter is described for enriching the [sup 196]Hg content of mercury, including a reactor, a low pressure electric discharge lamp containing a fill of mercury and an inert gas. A filter is arranged concentrically around the lamp. The reactor is arranged around said filter, whereby radiation from said lamp passes through the filter and into said reactor. The lamp, the filter and the reactor are formed of quartz, and are transparent to ultraviolet light. The [sup 196]Hg concentration in the mercury fill is less than that which is present in naturally occurring mercury, that is, less than about 0.146 atomic weight percent. Hydrogen is also included in the fill and serves as a quenching gas in the filter, the hydrogen also serving to prevent disposition of a dark coating on the interior of the filter. 9 figs.

Grossman, M.W.; George, W.A.

1989-06-13T23:59:59.000Z

110

Evaluation of HEPA filter service life  

SciTech Connect (OSTI)

Rocky Flats Environmental Technology Site (RFETS), has approximately 10,000 High Efficiency Particulate Air (HEPA) Filters installed in a variety of filter plenums. These ventilation/filtration plenum systems are used to control the release of airborne particulate contaminates to the environment during normal operations and potential accidents. This report summarizes the results of destructive and non-destructive tests on HEPA filters obtained from a wide variety of ages and service conditions. These tests were performed to determine an acceptable service life criteria for HEPA filters used at Rocky Flats Environmental Technology Site (RFETS). A total of 140 filters of various ages (1972 to 1996) and service history (new, aged unused, used) were tested. For the purpose of this report, filter age from manufacture date/initial test date to the current sample date was used, as opposed to the actual time a filter was installed in an operating system.

Fretthold, J.K.; Stithem, A.R.

1997-07-14T23:59:59.000Z

111

Digital fabrication in the architectural design process  

E-Print Network [OSTI]

Digital fabrication is affecting the architectural design process due to the increasingly important role it has in the fabrication of architectural models. Many design professionals, professors, and students have experienced ...

Seely, Jennifer C. K., 1975-

2004-01-01T23:59:59.000Z

112

Reproducible Tip Fabrication and Cleaning for UHV STM . | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Reproducible Tip Fabrication and Cleaning for UHV STM . Reproducible Tip Fabrication and Cleaning for UHV STM . Abstract: Several technical modifications related to the fabrication...

113

High-efficiency spectral purity filter for EUV lithography  

DOE Patents [OSTI]

An asymmetric-cut multilayer diffracts EUV light. A multilayer cut at an angle has the same properties as a blazed grating, and has been demonstrated to have near-perfect performance. Instead of having to nano-fabricate a grating structure with imperfections no greater than several tens of nanometers, a thick multilayer is grown on a substrate and then cut at an inclined angle using coarse and inexpensive methods. Effective grating periods can be produced this way that are 10 to 100 times smaller than those produced today, and the diffraction efficiency of these asymmetric multilayers is higher than conventional gratings. Besides their ease of manufacture, the use of an asymmetric multilayer as a spectral purity filter does not require that the design of an EUV optical system be modified in any way, unlike the proposed use of blazed gratings for such systems.

Chapman, Henry N. (Livermore, CA)

2006-05-23T23:59:59.000Z

114

Fabrication technology for ODS Alloy MA957  

SciTech Connect (OSTI)

A successful fabrication schedule has been developed at Carpenter Technology Corporation for the production of MA957 fuel and blanket cladding. Difficulties with gun drilling, plug drawing and recrystallization were overcome to produce a pilot lot of tubing. This report documents the fabrication efforts of two qualified vendors and the support studies performed at WHC to develop the fabrication-schedule.

ML Hamilton; DS Gelles; RJ Lobsinger; MM Paxton; WF Brown

2000-03-16T23:59:59.000Z

115

Tutorial: Hot Topics in Personal Fabrication Research  

Science Journals Connector (OSTI)

In this tutorial, we survey novel ways for interacting with personal fabrication machines, such as laser cutters, milling machines, and 3D printers. The goal is to provide attendees with an overview of recent HCI re- search in personal fabrication and ... Keywords: 3d printing, laser cutting, milling machines, personal fabrication, rapid prototyping

Stefanie Mueller, Alexandra Ion, Patrick Baudisch

2014-11-01T23:59:59.000Z

116

SOx-NOx-Rox Box{trademark} flue gas clean-up demonstration. Final report  

SciTech Connect (OSTI)

Babcock and Wilcox`s (B and W) SOx-NOx-Rox Box{trademark} process effectively removes SOx, NOx and particulate (Rox) from flue gas generated from coal-fired boilers in a single unit operation, a high temperature baghouse. The SNRB technology utilizes dry sorbent injection upstream of the baghouse for removal of SOx and ammonia injection upstream of a zeolitic selective catalytic reduction (SCR) catalyst incorporated in the baghouse to reduce NOx emissions. Because the SOx and NOx removal processes require operation at elevated gas temperatures (800--900 F) for high removal efficiency, high-temperature fabric filter bags are used in the baghouse. The SNRB technology evolved from the bench and laboratory pilot scale to be successfully demonstrated at the 5-MWe field scale. This report represents the completion of Milestone M14 as specified in the Work Plan. B and W tested the SNRB pollution control system at a 5-MWe demonstration facility at Ohio Edison`s R.E. Burger Plant located near Shadyside, Ohio. The design and operation were influenced by the results from laboratory pilot testing at B and W`s Alliance Research Center. The intent was to demonstrate the commercial feasibility of the SNRB process. The SNRB facility treated a 30,000 ACFM flue gas slipstream from Boiler No. 8. Operation of the facility began in May 1992 and was completed in May 1993. About 2,300 hours of high-temperature operation were achieved. The main emissions control performance goals of: greater than 70% SO{sub 2} removal using a calcium-based sorbent; greater than 90% NOx removal with minimal ammonia slip; and particulate emissions in compliance with the New Source Performance Standards (NSPS) of 0.03 lb/million Btu were exceeded simultaneously in the demonstration program when the facility was operated at optimal conditions. Testing also showed significant reductions in emissions of some hazardous air pollutants.

NONE

1995-09-01T23:59:59.000Z

117

Widget:RRSectionFilter | Open Energy Information  

Open Energy Info (EERE)

RRSectionFilter RRSectionFilter Jump to: navigation, search This widget creates a filter tool, which will allow the user to filter the content displayed on the screen by RR Section region. It has been designed for use explicitly with the Geothermal Regulatory Roadmap home page. It is not designed for any other use. Parameters No paramteres Dependancies The Geothermal Regulatory Roadmap Sections page. Usage This Widget assumes the existence of HTML elements created by the Geothermal Regulatory Roadmap Sections page, and is called by that page using the following code: {{#Widget:RRSectionFilter}} Example For an example of this widget in use, please visit the page referenced above. (GRR/Sections) Retrieved from "http://en.openei.org/w/index.php?title=Widget:RRSectionFilter&oldid=65912

118

Multi-Canister overpack internal HEPA filters  

SciTech Connect (OSTI)

The rationale for locating a filter assembly inside each Multi-Canister Overpack (MCO) rather than include the filter in the Cold Vacuum Drying (CVD) process piping system was to eliminate the potential for contamination to the operators, processing equipment, and the MCO. The internal HEPA filters provide essential protection to facility workers from alpha contamination, both external skin contamination and potential internal depositions. Filters installed in the CVD process piping cannot mitigate potential contamination when breaking the process piping connections. Experience with K-Basin material has shown that even an extremely small release can result in personnel contamination and costly schedule disruptions to perform equipment and facility decontamination. Incorporating the filter function internal to the MCO rather than external is consistent with ALARA requirements of 10 CFR 835. Based on the above, the SNF Project position is to retain the internal HEPA filters in the MCO design.

SMITH, K.E.

1998-11-03T23:59:59.000Z

119

Diesel particulate filter with zoned resistive heater  

DOE Patents [OSTI]

A diesel particulate filter assembly comprises a diesel particulate filter (DPF) and a heater assembly. The DPF filters a particulate from exhaust produced by an engine. The heater assembly has a first metallic layer that is applied to the DPF, a resistive layer that is applied to the first metallic layer, and a second metallic layer that is applied to the resistive layer. The second metallic layer is etched to form a plurality of zones.

Gonze, Eugene V [Pinckney, MI

2011-03-08T23:59:59.000Z

120

Zone heated diesel particulate filter electrical connection  

DOE Patents [OSTI]

An electrical connection system for a particulate filter is provided. The system includes: a particulate filter (PF) disposed within an outer shell wherein the PF is segmented into a plurality of heating zones; an outer mat disposed between the particulate filter and the outer shell; an electrical connector coupled to the outer shell of the PF; and a plurality of printed circuit connections that extend along the outer surface of the PF from the electrical connector to the plurality of heating zones.

Gonze, Eugene V. (Pinckney, MI); Paratore, Jr., Michael J. (Howell, MI)

2010-03-30T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

DC side filters for multiterminal HVDC systems  

SciTech Connect (OSTI)

Multiterminal HVDC systems present challenges in the specification and design of suitable dc side filtering. This document examines the existing experience and addresses the particular technical problems posed by multiterminal systems. The filtering requirements of small taps are discussed, as is the potential use of active filters. Aspects of calculation and design are considered and recommendations made to guide the planners and designers of future multiterminal schemes.

Shore, N.L.; Adamson, K.; Bard, P. [and others] [and others

1996-10-01T23:59:59.000Z

122

Electrically-Assisted Diesel Particulate Filter Regeneration...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Evaluation pm041lance2011p.pdf More Documents & Publications Electrically-Assisted Diesel Particulate Filter Regeneration Substrate Studies of an Electrically-Assisted Diesel...

123

CLEERS Activities: Diesel Soot Filter Characterization & NOx...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Control Fundamentals CLEERS Activities: Diesel Soot Filter Characterization & NOx Control Fundamentals 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit...

124

Magnetic Filtration Process, Magnetic Filtering Material, and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

SummaryORNL researchers developed a new method for filtering materials and managing wastewater. This invention offers an integrated, intensified process to handle organic...

125

Removing Stains from Washable Fabrics.  

E-Print Network [OSTI]

of May 8, 1914, as amended, and June 30, 1914, in cooperation with the United States Department of Agriculture. Zerle L. Carpenter, Director, Texas Agricultural Extension Service, The Texas A&M University System. lOM-1l-88, New CLO ...I UUL. Z TA24S.7 8873 NO.1616 B.1616 / Texas Agricultural Extension Service LIBRARY FEB 0 1 1989 Texas A&M University Removing Stains from Washable Fabrics Ann Vanderpoorten 8eard* Most spots and stains can be removed by prompt...

Beard, Ann Vanderpoorten

1988-01-01T23:59:59.000Z

126

Advances in Filter Miniaturization and Design/Analysis of RF MEMS Tunable Filters  

E-Print Network [OSTI]

-band filters, the use of cross-shaped fractals in half-mode substrate-integrated-waveguide bandpass filters resulted in a 37 percent size reduction. A compact bandpass filter that occupies an area of 0.315 mm2 is implemented in 90-nm CMOS technology for 20 GHz...

Sekar, Vikram

2012-10-19T23:59:59.000Z

127

Filtering Noisy ECG Signals Using the Extended Kalman Filter Based on a Modified Dynamic ECG Model  

E-Print Network [OSTI]

Filtering Noisy ECG Signals Using the Extended Kalman Filter Based on a Modified Dynamic ECG Model for the filtering of noisy ECG signals. The method is based on a modified nonlinear dynamic model, previously introduced for the generation of synthetic ECG signals. An automatic parameter selection method has also been

Paris-Sud XI, Université de

128

Polymer micromold and fabrication process  

DOE Patents [OSTI]

A mold assembly is disclosed with micro-sized features in which the hollow portion thereof is fabricated from a sacrificial mandrel which is surface treated and then coated to form an outer shell. The sacrificial mandrel is then selectively etched away leaving the outer shell as the final product. The sacrificial mandrel is fabricated by a precision lathe, for example, so that when removed by etching the inner or hollow area has diameters as small as 10`s of micros ({micro}m). Varying the inside diameter contours of the mold can be accomplished with specified ramping slopes formed on the outer surface of the sacrificial mandrel, with the inside or hollow section being, for example, 275 {micro}m in length up to 150 {micro}m in diameter within a 6 mm outside diameter (o.d.) mold assembly. The mold assembly itself can serve as a micronozzle or microneedle, and plastic parts, such as microballoons for angioplasty, polymer microparts, and microactuators, etc., may be formed within the mold assembly. 6 figs.

Lee, A.P.; Northrup, M.A.; Ahre, P.E.; Dupuy, P.C.

1997-08-19T23:59:59.000Z

129

OTA based active filter design  

E-Print Network [OSTI]

for the circuit of Fig, 17 (p, 29) was ')bown in bq. (4. $'6) to be gml gm A = 2 s ClC2 sClgmZ gm gm 1 2 (4. 40) 42 The fourth-order system shown in 1'ig. 24 has the function A gm1gm2 CIC2 gm2 gm1gm2 L '" c'CC 2 1 2 gm&gm4 CI 2 (4. 41) I... and low pass filter using the circuit of Fig. 6 Thc t&an&i pass transfer function was of tne for? Khls Ar s +(a+b-KhZ)s+ab (2 4) K = n C where G = GZ+G3 G 1 (2. 5) a = (Gy+G) / C] (2. 6) b = GG4 / C(G+G4) (2. 7) h] = GZ/g where g = G+G4 w...

Ferrell, John Steven

2012-06-07T23:59:59.000Z

130

Automatic tuning for linearly tunable filter  

E-Print Network [OSTI]

A new tuning scheme for linearly tunable high-Q filters is proposed. The tuning method is based on using the phase information for both frequency and Q factor tuning. There is no need to find out the relationship between a filter's passband...

Huang, Sung-Ling

2004-09-30T23:59:59.000Z

131

A fuzzy-tuned adaptive Kalman filter  

E-Print Network [OSTI]

In this paper, fuzzy processing is applied to the adaptive Kalman filter. The filter gain coefficients are adapted over a 50 dB range of unknown signal/noise dynamics, using fuzzy membership functions. Specific simulation results are shown for a...

Painter, John H.; Young Hwan Lho

1993-12-01T23:59:59.000Z

132

Cryogenic Filters for RFI Mitigation in Radioastronomy  

E-Print Network [OSTI]

RFI mitigation in Radioastronomy can be achieved adopting cryogenic filters in appropriate typologies. A study has been conducted in L, C and X band with the evaluation of the filter architecture in copper, with theoretical estimation, computer simulations, prototypes realization, laboratory measurements. Such work has been preliminary to the realization of HTS samples with the purpose of a similar complete characterization approach.

G. Tuccari; A. Caddemi; S. Barbarino; G. Nicotra; F. Consoli; F. Schilliro; F. Catalfamo

2005-01-03T23:59:59.000Z

133

Fabrication and Characterization of Organic Solar Cells.  

E-Print Network [OSTI]

??Bulk heterojunction organic solar cells have recently drawn tremendous attention because of their technological advantages for actualization of large-area and cost effective fabrication. Two important… (more)

Yengel, Emre

2010-01-01T23:59:59.000Z

134

Thermovoltaic semiconductor device including a plasma filter  

DOE Patents [OSTI]

A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

Baldasaro, Paul F. (Clifton Park, NY)

1999-01-01T23:59:59.000Z

135

Digital filtering in a disease detection system  

SciTech Connect (OSTI)

A low-pass, nonrecursive digital filter has been designed to process data in an automated enzyme immunoassay system. The software implemented filter has been installed in the Intel 80/10 system controller. A low-speed sample rate of three samples per second allowed the filter algorithm to be programmed in the high-level FORTRAN language with a resultant execution speed of 0.6 seconds per day array. Fourier techniques are used to derive a zero phase shift filter algorithm from a frequency domain prototype. The resulting alogrithm is modified by a Hamming window to reduce transients and Gibbs phenomenon oscillations. Observations on the effectiveness of the filter under full system operation indicate a 90% data recovery rate.

Brown, R.R.

1983-01-01T23:59:59.000Z

136

Method for reducing pressure drop through filters, and filter exhibiting reduced pressure drop  

DOE Patents [OSTI]

Methods for generating and applying coatings to filters with porous material in order to reduce large pressure drop increases as material accumulates in a filter, as well as the filter exhibiting reduced and/or more uniform pressure drop. The filter can be a diesel particulate trap for removing particulate matter such as soot from the exhaust of a diesel engine. Porous material such as ash is loaded on the surface of the substrate or filter walls, such as by coating, depositing, distributing or layering the porous material along the channel walls of the filter in an amount effective for minimizing or preventing depth filtration during use of the filter. Efficient filtration at acceptable flow rates is achieved.

Sappok, Alexander; Wong, Victor

2014-11-18T23:59:59.000Z

137

CONTAINER MATERIALS, FABRICATION AND ROBUSTNESS  

SciTech Connect (OSTI)

The multi-barrier 3013 container used to package plutonium-bearing materials is robust and thereby highly resistant to identified degradation modes that might cause failure. The only viable degradation mechanisms identified by a panel of technical experts were pressurization within and corrosion of the containers. Evaluations of the container materials and the fabrication processes and resulting residual stresses suggest that the multi-layered containers will mitigate the potential for degradation of the outer container and prevent the release of the container contents to the environment. Additionally, the ongoing surveillance programs and laboratory studies should detect any incipient degradation of containers in the 3013 storage inventory before an outer container is compromised.

Dunn, K.; Louthan, M.; Rawls, G.; Sindelar, R.; Zapp, P.; Mcclard, J.

2009-11-10T23:59:59.000Z

138

Nanotube Fabrication byNanotube Fabrication by Anodic Aluminum Oxide,Anodic Aluminum Oxide,  

E-Print Network [OSTI]

Nanotube Fabrication byNanotube Fabrication by Anodic Aluminum Oxide,Anodic Aluminum Oxide, Self-regulating phenomena in materials science: Self-assembly of nanopores during anodic oxidation of aluminum (AAO) Self combined anodic aluminum oxide (AAO) nanostructures with atomic layer deposition (ALD) to fabricate

Rubloff, Gary W.

139

Evaluation of Passive and Active Soot Filters for Removal of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Passive and Active Soot Filters for Removal of Particulate Emissions from Diesel Engines Evaluation of Passive and Active Soot Filters for Removal of Particulate Emissions from...

140

Development of SCR on Diesel Particulate Filter System for Heavy...  

Broader source: Energy.gov (indexed) [DOE]

SCR on Diesel Particulate Filter System for Heavy Duty Applications Development of SCR on Diesel Particulate Filter System for Heavy Duty Applications Evaluation of a system...

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Expanded Capacity Microwave-Cleaned Diesel Particulate Filter...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Expanded Capacity Microwave-Cleaned Diesel Particulate Filter Expanded Capacity Microwave-Cleaned Diesel Particulate Filter 2002 DEER Conference Presentation: Industrial Ceramic...

142

Predicting Thermal Stress in Diesel Particulate Filters | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Thermal Stress in Diesel Particulate Filters Predicting Thermal Stress in Diesel Particulate Filters 2004 Diesel Engine Emissions Reduction (DEER) Conference Presentation: Corning...

143

Ultra-Lite Diesel Particulate Filter Cartridge for Reduced Regeneratio...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Lite Diesel Particulate Filter Cartridge for Reduced Regeneration Time and Fuel Consumption Ultra-Lite Diesel Particulate Filter Cartridge for Reduced Regeneration Time and Fuel...

144

Neutron Imaging of Diesel Particulate Filters | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Neutron Imaging of Diesel Particulate Filters Neutron Imaging of Diesel Particulate Filters Neutron computed tomography shows soot and ash loading in a cordierite diesel...

145

Non-Destructive Neutron Imaging to Analyze Particulate Filters...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Neutron Imaging to Analyze Particulate Filters Non-Destructive Neutron Imaging to Analyze Particulate Filters Non-destructive, non-invasive imaging is being employed in the...

146

Durability of Diesel Engine Particulate Filters (Agreement ID...  

Broader source: Energy.gov (indexed) [DOE]

Durability of Diesel Engine Particulate Filters (Agreement ID:10461) Durability of Diesel Engine Particulate Filters (Agreement ID:10461) 2013 DOE Hydrogen and Fuel Cells Program...

147

Cryogenic metal mesh bandpass filters for submillimeter astronomy  

Science Journals Connector (OSTI)

A bandpass filter of the double-halfwave design has been developed for use in submillimeter astronomy. The filter is rugged, easily tunable, easy to construct, and cryogenically...

Dragovan, Mark

1984-01-01T23:59:59.000Z

148

Improvement and Simplification of Diesel Particulate Filter System...  

Broader source: Energy.gov (indexed) [DOE]

and Simplification of Diesel Particulate Filter System using a Ceria-Based Fuel-Borne Catalyst in Serial Applications Improvement and Simplification of Diesel Particulate Filter...

149

California ARB Verification Testing of the CBSTM Soot Filter...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

California ARB Verification Testing of the CBSTM Soot Filter for Stationary Diesel Applications California ARB Verification Testing of the CBSTM Soot Filter for Stationary Diesel...

150

Design of Water Filter for Third World Countries  

E-Print Network [OSTI]

Research &Responsibilities Sections Written Reverse osmosis filter research Acknowledgements Slow sand.2 Reverse Osmosis Filters 12.0 Recommendations _______________ Jingwen Wang #12;- 4 - Table of Contents List

Sun, Yu

151

U-252: Barracuda Web Filter Input Validation Flaws Permit Cross...  

Broader source: Energy.gov (indexed) [DOE]

2: Barracuda Web Filter Input Validation Flaws Permit Cross-Site Scripting Attacks U-252: Barracuda Web Filter Input Validation Flaws Permit Cross-Site Scripting Attacks September...

152

Tribological performance of hybrid filtered arc-magnetron coatings...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tribological performance of hybrid filtered arc-magnetron coatings - Part I: Coating deposition process and basic coating Tribological performance of hybrid filtered arc-magnetron...

153

Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology on Heavy and Light Vehicles Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology on Heavy and...

154

Apparatus and method for fabricating a microbattery  

DOE Patents [OSTI]

An apparatus and method for fabricating a microbattery that uses silicon as the structural component, packaging component, and semiconductor to reduce the weight, size, and cost of thin film battery technology is described. When combined with advanced semiconductor packaging techniques, such a silicon-based microbattery enables the fabrication of autonomous, highly functional, integrated microsystems having broad applicability.

Shul, Randy J. (Albuquerque, NM); Kravitz, Stanley H. (Albuquerque, NM); Christenson, Todd R. (Albuquerque, NM); Zipperian, Thomas E. (Edgewood, NM); Ingersoll, David (Albuquerque, NM)

2002-01-01T23:59:59.000Z

155

Fabrication of Niobium sheet for RF cavities  

E-Print Network [OSTI]

..................................................................................... 18 2 Fabrication of Niobium SRF Cavities............................................. 20 3 Fine Grain Cavities versus Single Crystal and Large Grain........... Cavities... typical to that of RF cavities in comparison with Cu at 77 and 300K. Nb has low surface resistance in the operating range of 1GHz among the metals. [27]. 2. Fabrication of Niobium SRF Cavities There are different approaches involved in making...

Balachandran, Shreyas

2009-05-15T23:59:59.000Z

156

Aluminum filtering preheater test results. Topical report, January-September 1994  

SciTech Connect (OSTI)

A prototype hood for preheating filters and refractory bowls used in the filtration of primary molten aluminum was tested under laboratory and plant conditions. The hood utilized gas fired, reticulated ceramic infrared burners as the heat source. The testing showed improved temperature uniformity and priming rates over conventional technology. A field test unit was designed and fabricated based on the prototype results. The unit was tested at the Alcoa Lafayette Plant in Lafayette, Indiana for a two month period. The unit performed reliably and improved preheating conditions were achieved. However, the lack of portability of the unit proved to be a problem for the operators.

Sweeting, T.B.; Gillish, K.

1995-04-01T23:59:59.000Z

157

Three dimensional fabric evolution of sheared sand  

SciTech Connect (OSTI)

Granular particles undergo translation and rolling when they are sheared. This paper presents a three-dimensional (3D) experimental assessment of fabric evolution of sheared sand at the particle level. F-75 Ottawa sand specimen was tested under an axisymmetric triaxial loading condition. It measured 9.5 mm in diameter and 20 mm in height. The quantitative evaluation was conducted by analyzing 3D high-resolution x-ray synchrotron micro-tomography images of the specimen at eight axial strain levels. The analyses included visualization of particle translation and rotation, and quantification of fabric orientation as shearing continued. Representative individual particles were successfully tracked and visualized to assess the mode of interaction between them. This paper discusses fabric evolution and compares the evolution of particles within and outside the shear band as shearing continues. Changes in particle orientation distributions are presented using fabric histograms and fabric tensor.

Hasan, Alsidqi; Alshibli, Khalid (UWA)

2012-10-24T23:59:59.000Z

158

Neutron Imaging of Diesel Particulate Filters  

SciTech Connect (OSTI)

This article presents nondestructive neutron computed tomography (nCT) measurements of Diesel Particulate Filters (DPFs) as a method to measure ash and soot loading in the filters. Uncatalyzed and unwashcoated 200cpsi cordierite DPFs exposed to 100% biodiesel (B100) exhaust and conventional ultra low sulfur 2007 certification diesel (ULSD) exhaust at one speed-load point (1500rpm, 2.6bar BMEP) are compared to a brand new (never exposed) filter. Precise structural information about the substrate as well as an attempt to quantify soot and ash loading in the channel of the DPF illustrates the potential strength of the neutron imaging technique.

Strzelec, Andrea [ORNL; Bilheux, Hassina Z [ORNL; FINNEY, Charles E A [ORNL; Daw, C Stuart [ORNL; Foster, Prof. Dave [University of Wisconsin; Rutland, Prof. Christopher J. [University of Wisconsin; Schillinger, Burkhard [FRM-II, Technische Universitaet Munchen; Schulz, Michael [FRM-II, Technische Universitaet Munchen

2009-01-01T23:59:59.000Z

159

Electrically heated particulate filter embedded heater design  

DOE Patents [OSTI]

An exhaust system that processes exhaust generated by an engine is provided. The system generally includes a particulate filter (PF) that filters particulates from the exhaust wherein an upstream end of the PF receives exhaust from the engine and wherein an upstream surface of the particulate filter includes machined grooves. A grid of electrically resistive material is inserted into the machined grooves of the exterior upstream surface of the PF and selectively heats exhaust passing through the grid to initiate combustion of particulates within the PF.

Gonze, Eugene V.; Chapman, Mark R.

2014-07-01T23:59:59.000Z

160

Metrics For Comparing Plasma Mass Filters  

SciTech Connect (OSTI)

High-throughput mass separation of nuclear waste may be useful for optimal storage, disposal, or environmental remediation. The most dangerous part of nuclear waste is the fission product, which produces most of the heat and medium-term radiation. Plasmas are well-suited to separating nuclear waste because they can separate many different species in a single step. A number of plasma devices have been designed for such mass separation, but there has been no standardized comparison between these devices. We define a standard metric, the separative power per unit volume, and derive it for three different plasma mass filters: the plasma centrifuge, Ohkawa filter, and the magnetic centrifugal mass filter. __________________________________________________

Abraham J. Fetterman and Nathaniel J. Fisch

2012-08-15T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Method and apparatus for a self-cleaning filter  

DOE Patents [OSTI]

A method and apparatus for removing fine particulate matter from a fluid stream without interrupting the overall process or flow. The flowing fluid inflates and expands the flexible filter, and particulate is deposited on the filter media while clean fluid is permitted to pass through the filter. This filter is cleaned when the fluid flow is stopped, the filter collapses, and a force is applied to distort the flexible filter media to dislodge the built-up filter cake. The dislodged filter cake falls to a location that allows undisrupted flow of the fluid after flow is restored. The shed particulate is removed to a bin for periodic collection. A plurality of filter cells can operate independently or in concert, in parallel, or in series to permit cleaning the filters without shutting off the overall fluid flow. The self-cleaning filter is low cost, has low power consumption, and exhibits low differential pressures.

Diebold, James P. (Lakewood, CO); Lilley, Arthur (Finleyville, PA); Browne, III, Kingsbury (Golden, CO); Walt, Robb Ray (Aurora, CO); Duncan, Dustin (Littleton, CO); Walker, Michael (Longmont, CO); Steele, John (Aurora, CO); Fields, Michael (Arvada, CO)

2010-11-16T23:59:59.000Z

162

Ozone Removal by Filters Containing Activated Carbon: A Pilot Study  

SciTech Connect (OSTI)

This study evaluated the ozone removal performance of moderate-cost particle filters containing activated carbon when installed in a commercial building heating, ventilating, and air conditioning (HVAC) system. Filters containing 300 g of activated carbon per 0.09 m2 of filter face area were installed in two 'experimental' filter banks within an office building located in Sacramento, CA. The ozone removal performance of the filters was assessed through periodic measurements of ozone concentrations in the air upstream and downstream of the filters. Ozone concentrations were also measured upstream and downstream of a 'reference' filter bank containing filters without any activated carbon. The filter banks with prefilters containing activated carbon were removing 60percent to 70percent of the ozone 67 and 81 days after filter installation. In contrast, there was negligible ozone removal by the reference filter bank without activated carbon.

Fisk, William; Spears, Mike; Sullivan, Douglas; Mendell, Mark

2009-09-01T23:59:59.000Z

163

Fail Save Shut Off Valve for Filtering Systems Employing Candle Filters  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fail Save Shut Off Fail Save Shut Off Valve for Filtering Systems Employing Candle Filters Opportunity The Department of Energy's National Energy Technology Laboratory (NETL) is seeking licensing partners interested in implementing United States Patent Number 6,981,516 entitled "Fail save shut off valve for filtering systems employing candle filters." Disclosed in this patent is a novel fail save shut off valve system that allows fluid flow during normal operational conditions, but prevents the flow of fluids in the event of system failure upstream that causes over- pressurization. It is particularly well suited for use in conjunction with hot gas filtering systems, which utilize ceramic candle filters. Used in such a hot gas system, the fail save valve stops the flow

164

Dissipative Cryogenic Filters with Zero DC Resistance  

SciTech Connect (OSTI)

The authors designed, implemented and tested cryogenic RF filters with zero DC resistance, based on wires with a superconducting core inside a resistive sheath. The superconducting core allows low frequency currents to pass with negligible dissipation. Signals above the cutoff frequency are dissipated in the resistive part due to their small skin depth. The filters consist of twisted wire pairs shielded with copper tape. Above approximately 1 GHz, the attenuation is exponential in {radical}{omega}, as typical for skin depth based RF filters. By using additional capacitors of 10 nF per line, an attenuation of at least 45 dB above 10 MHz can be obtained. Thus, one single filter stage kept at mixing chamber temperature in a dilution refrigerator is sufficient to attenuate room temperature black body radiation to levels corresponding to 10 mK above about 10 MHz.

Bluhm, Hendrik; Moler, Kathryn A.; /Stanford U., Appl. Phys. Dept

2008-04-22T23:59:59.000Z

165

Piezoelectric MEMS resonator characterization and filter design  

E-Print Network [OSTI]

This thesis presents modeling and first measurements of a new piezoelectric MEMS resonator developed at Draper Laboratory. In addition, some simple filter designs incorporating the resonator with predicted performance ...

Kang, Joung-Mo, 1978-

2004-01-01T23:59:59.000Z

166

Two in One: SCR on Filter  

Broader source: Energy.gov (indexed) [DOE]

1 BASF Corporation; 25 MiddlesexEssex Turnpike; Iselin, NJ 08830 USA 2 BASF Catalysts Germany GmbH; Freundallee 23, 30173 Hannover Two in One: SCR on Filter DEER 2010 2 Potential...

167

Emergency Filter for Low Pressure EGR  

Broader source: Energy.gov [DOE]

This project uses CFD simulation and laboratory tests to design single- and multi-layer mesh as an EGR emergency filter to prevent combustion particles from passing back to the engine.

168

Plasma Mass Filters For Nuclear Waste Reprocessing  

SciTech Connect (OSTI)

Practical disposal of nuclear waste requires high-throughput separation techniques. The most dangerous part of nuclear waste is the fission product, which contains the most active and mobile radioisotopes and produces most of the heat. We suggest that the fission products could be separated as a group from nuclear waste using plasma mass filters. Plasmabased processes are well suited to separating nuclear waste, because mass rather than chemical properties are used for separation. A single plasma stage can replace several stages of chemical separation, producing separate streams of bulk elements, fission products, and actinoids. The plasma mass filters may have lower cost and produce less auxiliary waste than chemical processing plants. Three rotating plasma configurations are considered that act as mass filters: the plasma centrifuge, the Ohkawa filter, and the asymmetric centrifugal trap.

Abraham J. Fetterman and Nathaniel J. Fisch

2011-05-26T23:59:59.000Z

169

Efficient implementation schemes for image enhancement filters  

E-Print Network [OSTI]

Generalized median filtering techniques that have appeared in previous literature suffer from some severe disadvantages. They are not only hardware intensive and time consuming but also tend to smear image edges. These shortcomings can be overcome...

Yusuf, Khadem Mahmud

2012-06-07T23:59:59.000Z

170

Onsite Wastewater Treatment Systems: Sand Filters  

E-Print Network [OSTI]

Sand filters are beds of granular material, or sand, drained from underneath so that pretreated wastewater can be treated, collected and distributed to a land application system. This publication explains the treatment, design, operation...

Lesikar, Bruce J.

2008-10-23T23:59:59.000Z

171

An optimal filtering algorithm for table constraints  

Science Journals Connector (OSTI)

Filtering algorithms for table constraints are constraint-based, which means that the propagation queue only contains information on the constraints that must be reconsidered. This paper proposes four efficient value-based algorithms for table constraints, ...

Jean-Baptiste Mairy; Pascal Van Hentenryck; Yves Deville

2012-10-01T23:59:59.000Z

172

Filtering Turbulent Sparsely Observed Geophysical Flows  

Science Journals Connector (OSTI)

Filtering sparsely turbulent signals from nature is a central problem of contemporary data assimilation. Here, sparsely observed turbulent signals from nature are generated by solutions of two-layer quasigeostrophic models with turbulent cascades ...

John Harlim; Andrew J. Majda

2010-04-01T23:59:59.000Z

173

Optimization of tunable silicon compatible microring filters  

E-Print Network [OSTI]

Microring resonators can be used as pass-band filters for wavelength division demultiplexing in electronic-photonic integrated circuits for applications such as analog-to-digital converters (ADCs). For high quality signal ...

Amatya, Reja

2008-01-01T23:59:59.000Z

174

Advanced filters and components for power applications  

E-Print Network [OSTI]

The objective of this thesis is to improve the high frequency performance of components and filters by better compensating the parasitic effects of practical components. The main application for this improvement is in ...

Neugebauer, Timothy Carl, 1975-

2004-01-01T23:59:59.000Z

175

Development of Self-destructing Filter Cake  

E-Print Network [OSTI]

chemical reaction rate, especially at high temperatures. This study describes a novel self-destructing drilling fluid system. Filter cakes are formed from a formula of drilling fluid that have a mixture of solid acid precursor and particulate solid acid...

Rostami, Ameneh

2010-08-24T23:59:59.000Z

176

Optimal multihump filter for photometric redshifts  

E-Print Network [OSTI]

We propose a novel type filter for multicolor imaging to improve on the photometric redshift estimation of galaxies. An extra filter - specific to a certain photometric system - may be utilized with high efficiency. We present a case study of the Hubble Space Telescope's Advanced Camera for Surveys and show that one extra exposure could cut down the mean square error on photometric redshifts by 34% over the z<1.3 redshift range.

Tamas Budavari; Alexander S. Szalay; Istvan Csabai; Andrew J. Connolly; Zlatan Tsvetanov

2001-06-05T23:59:59.000Z

177

E-Print Network 3.0 - adaptive notch filters Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

filters Search Powered by Explorit Topic List Advanced Search Sample search results for: adaptive notch filters...

178

E-Print Network 3.0 - active power filtering Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

filtering Search Powered by Explorit Topic List Advanced Search Sample search results for: active power filtering...

179

E-Print Network 3.0 - active power filter Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

filter Search Powered by Explorit Topic List Advanced Search Sample search results for: active power filter...

180

E-Print Network 3.0 - active power filters Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

filters Search Powered by Explorit Topic List Advanced Search Sample search results for: active power filters...

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Scale-invariant filtering design and analysis for edge detection  

Science Journals Connector (OSTI)

...integral filter|scale-space smoothing|two-dimensional filtering...behaviour known as scale-space smoothing causing edges to deform...scale) of the filter. This smoothing effect distorts the original...ramps. Infinite symmetric exponential filter is also proposed by...

2011-01-01T23:59:59.000Z

182

Removal of residual particulate matter from filter media  

DOE Patents [OSTI]

A method for removing residual filter cakes that remain adhered to a filter after typical particulate removal methodologies have been employed, such as pulse-jet filter element cleaning, for all cleanable filters used for air pollution control, dust control, or powder control.

Almlie, Jay C; Miller, Stanley J

2014-11-11T23:59:59.000Z

183

Enforcement Letter, Parsons Technology Development & Fabrication Complex -  

Broader source: Energy.gov (indexed) [DOE]

Parsons Technology Development & Fabrication Parsons Technology Development & Fabrication Complex - April 13, 2010 Enforcement Letter, Parsons Technology Development & Fabrication Complex - April 13, 2010 April 13, 2010 Enforcement Letter issued to Parsons Technology Development & Fabrication Complex related to Deficiencies in the Fabrication of Safety Significant Embed Plates at the Salt Waste Processing Facility at the Savannah River Site This letter refers to the Office of Health, Safety and Security's Office of Enforcement's investigation into the facts and circumstances associated with quality assurance deficiencies in the fabrication of safety significant embed plates. These embed plates were fabricated by Parsons Technology Development and Fabrication Complex (PTDFC) a supplier to

184

FABRICATION AND CHARACTERIZATION OF MEMS THERMAL INTERFACE MATERIALS .  

E-Print Network [OSTI]

??This work presents the fabrication and characterization of MEMS thermal interface materials. Different materials were used to fabricate and characterize different configurations of sample thermal… (more)

[No author

2011-01-01T23:59:59.000Z

185

Hydrogen Station Test Device Design and Fabrication | Department...  

Broader source: Energy.gov (indexed) [DOE]

Hydrogen Station Test Device Design and Fabrication Hydrogen Station Test Device Design and Fabrication October 2, 2014 - 3:02pm Addthis Open Date: August 26, 2014 Requesting...

186

Method of and apparatus for testing the integrity of filters  

DOE Patents [OSTI]

A method of and apparatus are disclosed for testing the integrity of individual filters or filter stages of a multistage filtering system including a diffuser permanently mounted upstream and/or downstream of the filter stage to be tested for generating pressure differentials to create sufficient turbulence for uniformly dispersing trace agent particles within the airstream upstream and downstream of such filter stage. Samples of the particle concentration are taken upstream and downstream of the filter stage for comparison to determine the extent of particle leakage past the filter stage. 5 figs.

Herman, R.L.

1985-05-07T23:59:59.000Z

187

S-shaped magnetic macroparticle filter for cathodic arc deposition  

SciTech Connect (OSTI)

A new magnetic macroparticle filter design consisting of two 90{sup o} filters forming an S-shape is described. Transport properties of this S-filter are investigated using Langmuir and deposition probes. It is shown that filter efficiency is product of the efficiencies of two 90{sup o} filters and the deposition rate is still acceptably high to perform thin film deposition. Films of amorphous hard carbon have been deposited using a 90{sup o} filter and the S-filter, and macroparticle content of the films are compared.

Anders, S.; Anders, A.; Dickinson, M.R.; MacGill, R.A.; Brown, I.G.

1996-04-01T23:59:59.000Z

188

Central Fabrication Services | Brookhaven National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Central Fabrication Services Central Fabrication Services Home Management Staff Facilities Heavy Machine Shop Welding Shop Sheet Metal Shop Central Cleaning Facility CR X-Ray Facility Inspection Area Services Fabrication Services Group is committed to providing exceptional service to all of its customers. Safety is an integral part of our program and is in the foundation of everything we do. Fabrication Services is a full service proto type shop with production capabilities. Our facilities include machining, wire EDM, water jet cutting, orbital welding, welding, sheet metal, precision measurement, 3D printing, maintenance metal working, cleaning for UHV applications, and our newest addition Computed Radiography. Our capabilities include working on ultra-miniature parts to 20 ton assemblies. Our capability and range of services we provide is largely due

189

Free form fabrication of thermoplastic composites  

SciTech Connect (OSTI)

This report describes the results of composites fabrication research sponsored by the Laboratory Directed Research and Development (LDRD) program at Sandia National Laboratories. They have developed, prototyped, and demonstrated the feasibility of a novel robotic technique for rapid fabrication of composite structures. Its chief innovation is that, unlike all other available fabrication methods, it does not require a mold. Instead, the structure is built patch by patch, using a rapidly reconfigurable forming surface, and a robot to position the evolving part. Both of these components are programmable, so only the control software needs to be changed to produce a new shape. Hence it should be possible to automatically program the system to produce a shape directly from an electronic model of it. It is therefore likely that the method will enable faster and less expensive fabrication of composites.

Kaufman, S.G.; Spletzer, B.L.; Guess, T.R.

1998-02-01T23:59:59.000Z

190

Fabrication and properties of microporous silicon  

E-Print Network [OSTI]

Microporous silicon layers were fabricated by electrochemical etching of single crystalline silicon wafers in HF-ethanol solutions. The pore properties of porous silicon were examined by physical adsorption of nitrogen and the relationship between...

Shao, Jianzhong

1994-01-01T23:59:59.000Z

191

FSC Request Form ME FABRICATION SUPPORT CENTER  

E-Print Network [OSTI]

:__________________ Date:__________________ ________Hrs Cost: $ ________________ Fabrication of Job Machine on Loan Material Tooling Machine Operation Cost Manpower Assistance --- Name : ___________________ _______ Hrs Cost: $ ______ Please tick CNC Lathe / Milling Lathe / Milling EDM / Wire Cut Welding Ripping Saw / Planner Power Shear

Zhiwei, Huang

192

The design and construction of fabric structures  

E-Print Network [OSTI]

In its short history, fabric structures have fascinated architects and engineers alike. Architects appreciate their unusual shapes and forms while engineers delight in their "pure" structural expression. Capable of spanning ...

Fang, Rosemarie

2009-01-01T23:59:59.000Z

193

Carbon fiber composite molecular sieve electrically regenerable air filter media  

DOE Patents [OSTI]

An electrically regenerable gas filter system includes a carbon fiber composite molecular sieve (CFCMS) filter medium. After a separate medium-efficiency pre-filter removes particulate from the supply airstream, the CFCMS filter sorbs gaseous air pollutants before the air is recirculated to the space. When saturated, the CFCMS media is regenerated utilizing a low-voltage current that is caused to pass through the filter medium.

Wilson, Kirk A. (Knoxville, TN); Burchell, Timothy D. (Oak Ridge, TN); Judkins, Roddie R. (Knoxville, TN)

1998-01-01T23:59:59.000Z

194

Carbon fiber composite molecular sieve electrically regenerable air filter media  

DOE Patents [OSTI]

An electrically regenerable gas filter system includes a carbon fiber composite molecular sieve (CFCMS) filter medium. After a separate medium-efficiency pre-filter removes particulate from the supply air stream, the CFCMS filter sorbs gaseous air pollutants before the air is recirculated to the space. When saturated, the CFCMS media is regenerated utilizing a low-voltage current that is caused to pass through the filter medium. 3 figs.

Wilson, K.A.; Burchell, T.D.; Judkins, R.R.

1998-10-27T23:59:59.000Z

195

Materials compatibility issues for fabric composite radiators  

SciTech Connect (OSTI)

Short term materials compatibility tests have been completed on potential materials to be used in fabric composite radiators for space applications. Specific materials tested include copper, aluminum, titanium, FEP Teflon tubing, and three high strength fabric fibers: alumina-boria-silica, silicon carbide, and silicon dioxide. These materials have been exposed to pure water, methanol, and acetone for periods of time up to 5000 hours at variety of appropriate temperatures.

Marks, T.S.; Klein, A.C. (Department of Nuclear Engineering, Radiation Center, C116, Oregon State University, Corvallis, Oregon 97331-5902 (US))

1991-01-01T23:59:59.000Z

196

Carbon nanotube collimator fabrication and application  

DOE Patents [OSTI]

Apparatus, methods, systems and devices for fabricating individual CNT collimators. Micron size fiber coated CNT samples are synthesized with chemical vapor deposition method and then the individual CNT collimators are fabricated with focused ion beam technique. Unfocused electron beams are successfully propagated through the CNT collimators. The CNT nano-collimators are used for applications including single ion implantation and in high-energy physics, and allow rapid, reliable testing of the transmission of CNT arrays for transport of molecules.

Chow, Lee (Orlando, FL); Chai, Guangyu (Orlando, FL); Schenkel, Thomas (San Francisco, CA)

2010-07-06T23:59:59.000Z

197

Fabrication of glass microspheres with conducting surfaces  

DOE Patents [OSTI]

A method for making hollow glass microspheres with conducting surfaces by adding a conducting vapor to a region of the glass fabrication furnace. As droplets or particles of glass forming material pass through multiple zones of different temperature in a glass fabrication furnace, and are transformed into hollow glass microspheres, the microspheres pass through a region of conducting vapor, forming a conducting coating on the surface of the microspheres.

Elsholz, William E. (Acampo, CA)

1984-01-01T23:59:59.000Z

198

Synthesis of Complex Subband Hybrid Filter Banks A/D Converters using Adaptive Filters  

E-Print Network [OSTI]

Synthesis of Complex Subband Hybrid Filter Banks A/D Converters using Adaptive Filters Zhiguo Song. This synthesis method is validated for a complex subband HFB by simulation in the time-domain. I. INTRODUCTION (analysis bank), a conversion-stage (ADC bank) and a digital reconstruction (synthesis bank). With a given

Paris-Sud XI, Université de

199

Hot gas filter and system assembly  

DOE Patents [OSTI]

A filter element for separating fine dirty particles from a hot gas. The filter element comprises a first porous wall and a second porous wall. Each porous wall has an outer surface and an inner surface. The first and second porous walls being coupled together thereby forming a substantially closed figure and open at one end. The open end is formed to be coupled to a hot gas clean up system support structure. The first and second porous walls define a channel beginning at the open end and terminate at the closed end through which a filtered clean gas can flow through and out into the clean gas side of a hot gas clean up system.

Lippert, Thomas Edwin (Murrysville, PA); Palmer, Kathryn Miles (Monroeville, PA); Bruck, Gerald Joseph (Murrysville, PA); Alvin, Mary Anne (Pittsburgh, PA); Smeltzer, Eugene E. (Export, PA); Bachovchin, Dennis Michael (Murrysville, PA)

1999-01-01T23:59:59.000Z

200

Secondary Pollutants from Ozone Reaction with Ventilation Filters and Degradation of Filter Media Additives  

SciTech Connect (OSTI)

Prior research suggests that chemical processes taking place on the surface of particle filters employed in buildings may lead to the formation of harmful secondary byproducts. We investigated ozone reactions with fiberglass, polyester, cotton/polyester and polyolefin filter media, as well as hydrolysis of filter media additives. Studies were carried out on unused media, and on filters that were installed for 3 months in buildings at two different locations in the San Francisco Bay Area. Specimens from each filter media were exposed to {approx}150 ppbv ozone in a flow tube under a constant flow of dry or humidified air (50percent RH). Ozone breakthrough was recorded for each sample over periods of {approx}1000 min; the ozone uptake rate was calculated for an initial transient period and for steady-state conditions. While ozone uptake was observed in all cases, we did not observe significant differences in the uptake rate and capacity for the various types of filter media tested. Most experiments were performed at an airflow rate of 1.3 L/min (face velocity = 0.013 m/s), and a few tests were also run at higher rates (8 to 10 L/min). Formaldehyde and acetaldehyde, two oxidation byproducts, were quantified downstream of each sample. Those aldehydes (m/z 31 and 45) and other volatile byproducts (m/z 57, 59, 61 and 101) were also detected in real-time using Proton-Transfer Reaction - Mass Spectrometry (PTR-MS). Low-ppbv byproduct emissions were consistently higher under humidified air than under dry conditions, and were higher when the filters were loaded with particles, as compared with unused filters. No significant differences were observed when ozone reacted over various types of filter media. Fiberglass filters heavily coated with impaction oil (tackifier) showed higher formaldehyde emissions than other samples. Those emissions were particularly high in the case of used filters, and were observed even in the absence of ozone, suggesting that hydrolysis of additives, rather than ozonolysis, is the main formaldehyde source in those filters. Emission rates of formaldehyde and acetaldehyde were not found to be large enough to substantially increase indoor concentrations in typical building scenarios. Nevertheless, ozone reactions on HVAC filters cannot be ignored as a source of low levels of indoor irritants.

Destaillats, Hugo; Chen, Wenhao; Apte, Michael; Li, Nuan; Spears, Michael; Almosni, Jérémie; Brunner, Gregory; Zhang, Jianshun (Jensen); Fisk, William J.

2011-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Experimental noise filtering by quantum control  

E-Print Network [OSTI]

Instabilities due to extrinsic interference are routinely faced in systems engineering, and a common solution is to rely on a broad class of $\\textit{filtering}$ techniques in order to afford stability to intrinsically unstable systems. For instance, electronic systems are frequently designed to incorporate electrical filters composed of, $\\textit{e.g.}$ RLC components, in order to suppress the effects of out-of-band fluctuations that interfere with desired performance. Quantum coherent systems are now moving to a level of complexity where challenges associated with realistic time-dependent noise are coming to the fore. Unfortunately, standard control solutions involving feedback are generally impossible due to the strictures of quantum mechanics, and existing error-suppressing gate constructions generally rely on unphysical bang-bang controls or quasi-static error models that do not reflect realistic laboratory environments. In this work we use the theory of quantum control engineering and experiments with trapped $^{171}$Yb$^{+}$ ions to demonstrate the construction of novel $\\textit{noise filters}$ which are specifically designed to mitigate the effect of realistic time-dependent fluctuations on qubits \\emph{during useful operations}. Starting with desired filter characteristics and the Walsh basis functions, we use a combination of analytic design rules and numeric search to construct time-domain noise filters tailored to a desired state transformation. Our results validate the generalized filter-transfer function framework for arbitrary quantum control operations, and demonstrate that it can be leveraged as an effective and efficient tool for developing novel robust control protocols.

A. Soare; H. Ball; D. Hayes; J. Sastrawan; M. C. Jarratt; J. J. McLoughlin; X. Zhen; T. J. Green; M. J. Biercuk

2014-04-03T23:59:59.000Z

202

Electrically heated particulate filter using catalyst striping  

DOE Patents [OSTI]

An exhaust system that processes exhaust generated by an engine is provided. The system generally includes a particulate filter (PF) that filters particulates from the exhaust wherein an upstream end of the PF receives exhaust from the engine. A grid of electrically resistive material is applied to an exterior upstream surface of the PF and selectively heats exhaust passing through the grid to initiate combustion of particulates within the PF. A catalyst coating is applied to the PF that increases a temperature of the combustion of the particulates within the PF.

Gonze, Eugene V; Paratore, Jr., Michael J; Ament, Frank

2013-07-16T23:59:59.000Z

203

Electrically heated particulate filter with reduced stress  

DOE Patents [OSTI]

A system comprises a particulate matter (PM) filter comprising an inlet for receiving exhaust gas. A zoned heater is arranged in the inlet and comprises a resistive heater comprising N zones, where N is an integer greater than one. Each of the N zones comprises M sub-zones, where M is an integer greater than one. A control module selectively activates one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones and deactivates others of the N zones.

Gonze, Eugene V.

2013-03-05T23:59:59.000Z

204

Multichannel image regularization using anisotropic geodesic filtering  

SciTech Connect (OSTI)

This paper extends a recent image-dependent regularization approach introduced in aiming at edge-preserving smoothing. For that purpose, geodesic distances equipped with a Riemannian metric need to be estimated in local neighbourhoods. By deriving an appropriate metric from the gradient structure tensor, the associated geodesic paths are constrained to follow salient features in images. Following, we design a generalized anisotropic geodesic filter; incorporating not only a measure of the edge strength, like in the original method, but also further directional information about the image structures. The proposed filter is particularly efficient at smoothing heterogeneous areas while preserving relevant structures in multichannel images.

Grazzini, Jacopo A [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

205

Management Staff | Central Fabrication Services | Brookhaven National  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Management Staff Management Staff Al Farland Al Farland Central Fabrication Services General Supervisor Welding, Sheet Metal, and Maintenance Metal Work Supervisor Al Farland joined the Laboratory in 1978 with over 20 years of experience in the metal fabrication industry. Al worked on the floor before becoming a supervisor and is familiar and responsible for the Central Fabrication Services group. Phone: (631) 344-8462 Fax: (631) 344-7208 Email: farland@bnl.gov Kevin Campbell Kevin Campbell Machine Shop Supervisor Kevin Campbell came to the Laboratory in 2008 as a programmer/planner/estimator and has since been promoted to Machine Shop Supervisor. Kevin is responsible for Machine shop operations. Phone: (631) 344-3498 Fax: (631) 344-7208 Email: kcampbell@bnl.gov Chris Manning Chris Manning

206

Services | Central Fabrication Services | Brookhaven National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Services & Capabilities Services & Capabilities The Central Fabrication Services Division's capabilities range from an Electric Discharge Machining (EDM) capability, to a state of the art cleaning facility, to a large fabricating facility which includes CNC Machining, Automatic Tube Welding, CNC Punch Press capability, and 3-D printing. CNC Auto Feed Saw High Bay Area 3-D Printer Main Shop, Building 479 Maintenance Sheet Metal Area Water Jet Machine X-ray Generating Tube CR X-ray Processor with High Resolution Monitor Low Bay Area in Machine Shop Wire EDM Machine Wire EDM Machine Oil Recycling Facility, Building 495 UHV Cleaning Facility, Building 498 Material Storage and Stock Central Fabrication Services is proud of it's highly proficient technical staff all of which are available, at no cost to the customer, for

207

Method of fabricating a multilayer insulation blanket  

DOE Patents [OSTI]

An improved multilayer insulation blanket for insulating cryogenic structures operating at very low temperatures is disclosed. An apparatus and method for fabricating the improved blanket are also disclosed. In the improved blanket, each successive layer of insulating material is greater in length and width than the preceding layer so as to accommodate thermal contraction of the layers closest to the cryogenic structure. The fabricating apparatus has a rotatable cylindrical mandrel having an outer surface of fixed radius that is substantially arcuate, preferably convex, in cross-section. The method of fabricating the improved blanket comprises (a) winding a continuous sheet of thermally reflective material around the circumference of the mandrel to form multiple layers, (b) binding the layers along two lines substantially parallel to the edges of the circumference of the mandrel, (c) cutting the layers along a line parallel to the axle of the mandrel, and (d) removing the bound layers from the mandrel.

Gonczy, John D. (Oak Lawn, IL); Niemann, Ralph C. (Downers Grove, IL); Boroski, William N. (Aurora, IL)

1993-01-01T23:59:59.000Z

208

Multilayer insulation blanket, fabricating apparatus and method  

DOE Patents [OSTI]

An improved multilayer insulation blanket for insulating cryogenic structures operating at very low temperatures is disclosed. An apparatus and method for fabricating the improved blanket are also disclosed. In the improved blanket, each successive layer of insulating material is greater in length and width than the preceding layer so as to accommodate thermal contraction of the layers closest to the cryogenic structure. The fabricating apparatus has a rotatable cylindrical mandrel having an outer surface of fixed radius that is substantially arcuate, preferably convex, in cross-section. The method of fabricating the improved blanket comprises (a) winding a continuous sheet of thermally reflective material around the circumference of the mandrel to form multiple layers, (b) binding the layers along two lines substantially parallel to the edges of the circumference of the mandrel, (c) cutting the layers along a line parallel to the axle of the mandrel, and (d) removing the bound layers from the mandrel.

Gonczy, John D. (Oak Lawn, IL); Niemann, Ralph C. (Downers Grove, IL); Boroski, William N. (Aurora, IL)

1992-01-01T23:59:59.000Z

209

Epoxy bond and stop etch fabrication method  

DOE Patents [OSTI]

A class of epoxy bond and stop etch (EBASE) microelectronic fabrication techniques is disclosed. The essence of such techniques is to grow circuit components on top of a stop etch layer grown on a first substrate. The first substrate and a host substrate are then bonded together so that the circuit components are attached to the host substrate by the bonding agent. The first substrate is then removed, e.g., by a chemical or physical etching process to which the stop etch layer is resistant. EBASE fabrication methods allow access to regions of a device structure which are usually blocked by the presence of a substrate, and are of particular utility in the fabrication of ultrafast electronic and optoelectronic devices and circuits.

Simmons, Jerry A. (Sandia Park, NM); Weckwerth, Mark V. (Pleasanton, CA); Baca, Wes E. (Albuquerque, NM)

2000-01-01T23:59:59.000Z

210

Autoassociative neural networks and noise filtering  

Science Journals Connector (OSTI)

We introduce linear autoassociative neural (AN) network filters for the removal of additive noise from one-dimensional (1-D) time series. The AN network will have a (2M+1)×L×(2M+1) architecture, and for M fixed, we show how to choose ...

J.R. Dorronsoro; V. Lopez; C.S. Cruz; J.A. Siguenza

2003-05-01T23:59:59.000Z

211

Modeling Multi Output Filtering Effects in PCMOS  

E-Print Network [OSTI]

Modeling Multi Output Filtering Effects in PCMOS Anshul Singh*, Arindam Basu, Keck-Voon Ling, Nanyang Technological University (NTU), Singapore *NTU-Rice Institute of Sustainable and Applied Infodynamics (ISAID), NTU, Singapore $School of Computer Engineering, NTU, Singapore §School of ECE, Georgia

Mooney, Vincent

212

Evaluation and Conversation in Collaborative Filtering  

E-Print Network [OSTI]

laid down by the university. Rachael Rafter October 2010 ii #12;For My Parents, Helen and Maurice iii collaborative filtering, I find myself suddenly lost for words when I try to express what these people mean, albeit the academic one. And to my parents, Maurice and Helen.....what can I say....there are no words

Hammerton, James

213

Document Filtering With Inference Networks Jamie Callan  

E-Print Network [OSTI]

Document Filtering With Inference Networks Jamie Callan Computer Science Department University document ltering. The prob- lems of document retrieval and document ltering are sim- ilar at an abstract- mation available, are all di erent. This paper describes a new statistical document ltering system called

Callan, Jamie

214

NISTIR 7516 Forensic Filtering of Cell  

E-Print Network [OSTI]

NISTIR 7516 Forensic Filtering of Cell Phone Protocols AurélienDelaitre WayneJansen #12;ii Forensic of Standards and Technology Interagency Report 42 pages (2008) iii #12;Abstract Phone managers are non-forensic managers are sometimes used by forensic investigators to recover data from a cell phone when no suitable

215

E-Print Network 3.0 - adaptive information filtering Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

information filtering Page: << < 1 2 3 4 5 > >> 1 Applications of the Fourier Transform in Imaging Highpass and Lowpass Filters Summary: filters. The following was prelimi-...

216

Investigation of IAQ-Relevant Surface Chemistry and Emissions on HVAC Filter Materials  

E-Print Network [OSTI]

VOCs emitted by reactions of HVAC filters with ozone usingand Emissions on HVAC Filter Materials Hugo Destaillats andChemistry and Emissions on HVAC Filter Materials Authors:

Destaillats, Hugo

2010-01-01T23:59:59.000Z

217

Wavelets and multirate filter banks : theory, structure, design, and applications  

E-Print Network [OSTI]

Wavelets and filter banks have revolutionized signal processing with their ability to process data at multiple temporal and spatial resolutions. Fundamentally, continuous-time wavelets are governed by discrete-time filter ...

Chen, Ying-Jui, 1972-

2004-01-01T23:59:59.000Z

218

Tracking moving radar targets with parallel, velocity-tuned filters  

DOE Patents [OSTI]

Radar data associated with radar illumination of a movable target is processed to monitor motion of the target. A plurality of filter operations are performed in parallel on the radar data so that each filter operation produces target image information. The filter operations are defined to have respectively corresponding velocity ranges that differ from one another. The target image information produced by one of the filter operations represents the target more accurately than the target image information produced by the remainder of the filter operations when a current velocity of the target is within the velocity range associated with the one filter operation. In response to the current velocity of the target being within the velocity range associated with the one filter operation, motion of the target is tracked based on the target image information produced by the one filter operation.

Bickel, Douglas L.; Harmony, David W.; Bielek, Timothy P.; Hollowell, Jeff A.; Murray, Margaret S.; Martinez, Ana

2013-04-30T23:59:59.000Z

219

Tunable, oblique incidence resonant grating filter for telecommunications  

Science Journals Connector (OSTI)

We have designed a tunable, oblique-incidence resonant grating filter that covers the C band as an add-drop device for incident TE-polarized light. We tune the filter by tilting a...

Niederer, Guido; Herzig, Hans Peter; Shamir, Joseph; Thiele, Hans; Schnieper, Marc; Zschokke, Christian

2004-01-01T23:59:59.000Z

220

Design of reflective phase compensator filters for telecommunications  

Science Journals Connector (OSTI)

Reflective phase compensator (RPC) filters provide a solution to the phase-dispersion problem of narrow bandpass (NBP) filters when the data rate is 40 Gbits/s or greater. By use of an...

Noe, Tony D

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Novel rf mems tunable filters with adjustable spurious suppression  

E-Print Network [OSTI]

This thesis presents the theory and design of fixed and Radio Frequency (RF) Microelectromechanical Systems (MEMS) -based tunable microwave filters for RF and microwave applications. The methodology for the design of coupled resonator filters...

Sekar, Vikram

2009-05-15T23:59:59.000Z

222

Diesel Particulate Filters and NO2 Emission Limits | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Filters and NO2 Emission Limits Diesel Particulate Filters and NO2 Emission Limits EPAs New air quality standards for NO2 will impact future DPF designs deer09ibrahim.pdf More...

223

Photometry Transformation from $RGB$ Bayer Filter System to Johnson-Cousins $BVR$ Filter System  

E-Print Network [OSTI]

The $RGB$ Bayer filter system consists of mosaic $R$, $G$, and $B$ filters on the grid of photo sensors which typical commercial DSLR (Digital Single Lens Reflex) cameras and CCD cameras are equipped with. Many unique astronomical data obtained using a $RGB$ Bayer filter system are available, including transient objects, e.g., supernovae, variable stars, and solar system bodies. The utilization of such data in scientific research strongly requires reliable photometry transformation methods. In this work, we develop a series of equations to convert the observed magnitudes in the $RGB$ Bayer filter system ($R_B$, $G_B$, and $B_B$) into the Johnson-Cousins $BVR$ filter system ($B_J$, $V_J$, and $R_C$). The new transformation equations derive the calculated magnitudes in Johnson-Cousins filters ($B_{Jcal}$, $V_{Jcal}$, and $R_{Ccal}$) as functions of magnitudes and colors. The mean differences between the transformed magnitudes and original magnitudes, i.e., the residuals, are $\\Delta(B_J-B_{Jcal})$ = 0.104 mag, ...

Park, Woojin; Shim, Hyunjin; Le, Huynh Anh N; Im, Myungshin; Chang, Seunghyuk; Yu, Joonkyu

2015-01-01T23:59:59.000Z

224

On-Site Wastewater Treatment Systems: Trickling Filter  

E-Print Network [OSTI]

Soil absorption field Septic tank Clarifier/Dosing tank Trickling filter On-site wastewater treatment systems Trickling filter Bruce Lesikar and Russell Persyn Extension Agricultural Engineering Specialist, Extension Assistant-Water Conservation... municipal wastewater before cities began using activated sludge aeration systems. Now, homes and businesses use trickling filters in on-site wastewater treatment systems. Each trickling filter system has several components: 3 A septic tank, which removes...

Lesikar, Bruce J.

2000-02-04T23:59:59.000Z

225

Filter:Incentives by Efficiency or Renewable | Open Energy Information  

Open Energy Info (EERE)

EnergyCat. Retrieved from "http:en.openei.orgwindex.php?titleFilter:IncentivesbyEfficiencyorRenewable&oldid26622...

226

Electrically heated particulate filter preparation methods and systems  

DOE Patents [OSTI]

A control system that controls regeneration of a particulate filter is provided. The system generally includes a fuel control module that controls injection of fuel into exhaust that passes through the particulate filter. A regeneration module controls current to the particulate filter to initiate regeneration after the fuel has been injected into the exhaust.

Gonze, Eugene V [Pinckney, MI

2012-01-31T23:59:59.000Z

227

Measurement of MTF Target Plasma Temperature Using Filtered Silicon Photodiodes  

E-Print Network [OSTI]

Measurement of MTF Target Plasma Temperature Using Filtered Silicon Photodiodes Presented at the 40 Plasma Temperature Using Filtered Silicon Photodiodes Magnetized Target Fusion (MTF) is an approach photodiodes, and a plasma-density interferometer. The data obtained from the array of seven filtered silicon

228

Atmospheric Environment 41 (2007) 31513160 Ozone removal by HVAC filters  

E-Print Network [OSTI]

Atmospheric Environment 41 (2007) 3151­3160 Ozone removal by HVAC filters P. Zhao, J.A. Siegel�, R May 2006; accepted 14 June 2006 Abstract Residential and commercial HVAC filters that have been loaded of the relative importance of HVAC filters as a removal mechanism for ozone in residential and commercial

Siegel, Jeffrey

229

Parameter Estimation Using Dual Fractional Power Filters Jason M. Kinser  

E-Print Network [OSTI]

by the user, they only have to be contained within the training set. A dual filter system will be created from an unknown input from the training set was operated on by the filter the constraint value associatedParameter Estimation Using Dual Fractional Power Filters Jason M. Kinser The Institute

Kinser, Jason M.

230

Method of fabricating a solar cell  

DOE Patents [OSTI]

Methods of fabricating solar cells are described. A porous layer may be formed on a surface of a substrate, the porous layer including a plurality of particles and a plurality of voids. A solution may be dispensed into one or more regions of the porous layer to provide a patterned composite layer. The substrate may then be heated.

Pass, Thomas; Rogers, Robert

2014-02-25T23:59:59.000Z

231

Method of fabrication of anchored nanostructure materials  

SciTech Connect (OSTI)

Methods for fabricating anchored nanostructure materials are described. The methods include heating a nano-catalyst under a protective atmosphere to a temperature ranging from about 450.degree. C. to about 1500.degree. C. and contacting the heated nano-catalysts with an organic vapor to affix carbon nanostructures to the nano-catalysts and form the anchored nanostructure material.

Seals, Roland D; Menchhofer, Paul A; Howe, Jane Y; Wang, Wei

2013-11-26T23:59:59.000Z

232

Environmentally Benign Flame Retardant Nanocoatings for Fabric  

E-Print Network [OSTI]

testing. A silica-like sheath was formed after burning that protected the fibers. Finally, the first intumescent LbL assembly was deposited on cotton fabric. SEM images show significant bubble formation on fibers, coated with a 0.5 wt percent PAAm/1 wt...

Li, Yu-Chin

2012-07-16T23:59:59.000Z

233

Materials Processing and Product Fabrication Course Description  

E-Print Network [OSTI]

/P/M Process Demo (1/2) 5 Monday, April 2 Machining/EDM/Die Fabrication (1/2) 6 Wednesday, April 4 Process. The course will concentrate on basic material processing techniques (i.e. casting, machining, and joining Wednesday, April 25 Project ­ Machining 13 Monday, April 30 Exam 14 Wednesday, May 2 Presentations #12;

234

Fuel Fabrication Capability Research and Development Plan  

SciTech Connect (OSTI)

The purpose of this document is to provide a comprehensive review of the mission of the Fuel Fabrication Capability (FFC) within the Global Threat Reduction Initiative Convert Program, along with research and development (R&D) needs that have been identified as necessary to ensuring mission success. The design and fabrication of successful nuclear fuels must be closely linked endeavors. Therefore, the overriding motivation behind the FFC R&D program described in this plan is to foster closer integration between fuel design and fabrication to reduce programmatic risk. These motivating factors are all interrelated, and progress addressing one will aid understanding of the others. The FFC R&D needs fall into two principal categories, 1) baseline process optimization, to refine the existing fabrication technologies, and 2) manufacturing process alternatives, to evaluate new fabrication technologies that could provide improvements in quality, repeatability, material utilization, or cost. The FFC R&D Plan examines efforts currently under way in regard to coupon, foil, plate, and fuel element manufacturing, and provides recommendations for a number of R&D topics that are of high priority but not currently funded (i.e., knowledge gaps). The plan ties all FFC R&D efforts into a unified vision that supports the overall Convert Program schedule in general, and the fabrication schedule leading up to the MP-1 and FSP-1 irradiation experiments specifically. The fabrication technology decision gates and down-selection logic and schedules are tied to the schedule for fabricating the MP-1 fuel plates, which will provide the necessary data to make a final fuel fabrication process down-selection. Because of the short turnaround between MP-1 and the follow-on FSP-1 and MP-2 experiments, the suite of specimen types that will be available for MP-1 will be the same as those available for FSP-1 and MP-2. Therefore, the only opportunity to explore parameter space and alternative processing is between now and 2016 when the candidate processes are down-selected in preparation for the MP-1, FSP-1, and MP-2 plate manufacturing campaigns. A number of key risks identified by the FFC are discussed in this plan, with recommended mitigating actions for those activities within FFC, and identification of risks that are impacted by activities in other areas of the Convert Program. The R&D Plan does not include discussion of FFC initiatives related to production-scale manufacturing of fuel (e.g., establishment of the Pilot Line Production Facility), rather, the goal of this plan is to document the R&D activities needed ultimately to enable high-quality and cost-effective production of the fuel by the commercial fuel fabricator. The intent is for this R&D Plan to be a living document that will be reviewed and updated on a regular basis (e.g., annually) to ensure that FFC R&D activities remain properly aligned to the needs of the Convert Program. This version of the R&D Plan represents the first annual review and revision.

Senor, David J.; Burkes, Douglas

2014-04-17T23:59:59.000Z

235

Analog FIR Filter Used for Range-Optimal Pulsed Radar Applications  

E-Print Network [OSTI]

of implementing the matched filter with an analog FIR filter is proposed. The FIR filter provides a linear phase response which is suitable for radar applications. Analog FIR filters can be implemented in the discrete domain, requiring operational amplifiers...

Su, Eric Chen

2014-08-13T23:59:59.000Z

236

Oil Bypass filter technology evaluation final report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

6-01355 6-01355 U.S. Department of Energy FreedomCAR & Vehicle Technologies Program Oil Bypass Filter Technology Evaluation Final Report TECHNICAL REPORT Larry Zirker James Francfort Jordan Fielding March 2006 Idaho National Laboratory Operated by Battelle Energy Alliance INL/EXT-06-01355 U.S. Department of Energy FreedomCAR & Vehicle Technologies Program Oil Bypass Filter Technology Evaluation Final Report Larry Zirker James Francfort Jordan Fielding March 2006 Idaho National Laboratory Transportation Technology Department Idaho Falls, Idaho 83415 Prepared for the U.S. Department of Energy Assistant Secretary for Energy Efficiency and Renewable Energy Under DOE Idaho Operations Office Contract DE-AC07-05ID14517

237

Quantum graph as a quantum spectral filter  

SciTech Connect (OSTI)

We study the transmission of a quantum particle along a straight input-output line to which a graph {Gamma} is attached at a point. In the point of contact we impose a singularity represented by a certain properly chosen scale-invariant coupling with a coupling parameter {alpha}. We show that the probability of transmission along the line as a function of the particle energy tends to the indicator function of the energy spectrum of {Gamma} as {alpha}{yields}{infinity}. This effect can be used for a spectral analysis of the given graph {Gamma}. Its applications include a control of a transmission along the line and spectral filtering. The result is illustrated with an example where {Gamma} is a loop exposed to a magnetic field. Two more quantum devices are designed using other special scale-invariant vertex couplings. They can serve as a band-stop filter and as a spectral separator, respectively.

Turek, Ondrej; Cheon, Taksu [Laboratory of Physics, Kochi University of Technology, Tosa Yamada, Kochi 782-8502 (Japan)] [Laboratory of Physics, Kochi University of Technology, Tosa Yamada, Kochi 782-8502 (Japan)

2013-03-15T23:59:59.000Z

238

Probing Aerogels by Multiple Quantum Filtered 131Xe NMR Spectroscopy  

Science Journals Connector (OSTI)

This is demonstrated in Figure 1 where four pulse sequences using multiple quantum filters are shown. ... Pyrex tube at 7.4 T, 1.2 MPa, and 298 K:? (a) double-quantum filtered pulse sequence, (b) magic-angle double-quantum filter which is a T2,±1 pulse sequence, (c) triple-quantum filtered sequence, and (d) triple-quantum filtered inversion recovery pulse sequence. ... 14-16 The tubes have been filled with aerogel fragments of a few millimeter diameter and were pressurized with xenon to about 6.9 MPa at 298 K to create supercritical conditions. ...

Thomas Meersmann; Michaël Deschamps; Geoffrey Bodenhausen

2001-01-13T23:59:59.000Z

239

Compact cyclone filter train for radiological and hazardous environments  

DOE Patents [OSTI]

A compact cyclone filter train is disclosed for the removal of hazardous and radiological particles from a gaseous fluid medium. This filter train permits a small cyclone separator to be used in a very small space envelope due to the arrangement of the filter housing adjacent to the separator with the cyclone separator and the filters mounted on a plate. The entire unit will have a hoist connection at the center of gravity so that the entire unit including the separator, the filters, and the base can be lifted and repositioned as desired. 3 figs.

Bench, T.R.

1998-04-28T23:59:59.000Z

240

Adaptive filters for detection of gravitational waves from coalescing binaries  

SciTech Connect (OSTI)

In this work we propose use of infinite impulse response adaptive line enhancer (IIR ALE) filters for detection of gravitational waves from coalescing binaries. We extend our previous work and define an adaptive matched filter structure. Filter performance is analyzed in terms of the tracking capability and determination of filter parameters. Furthermore, following the Neyman-Pearson strategy, receiver operating characteristics are derived, with closedform expressions for detection threshold, false alarm, and detection probability. Extensive tests demonstrate the effectiveness of adaptive filters both in terms of small computational cost and robustness.

Eleuteri, Antonio; Milano, Leopoldo; De Rosa, Rosario; Garufi, Fabio; Acernese, Fausto; Barone, Fabrizio; Giordano, Lara; Pardi, Silvio [Dip. di Scienze Fisiche, Universita di Napoli 'Federico II', via Cintia, I-80126 Naples (Italy) and INFN sez. Napoli, via Cintia, I-80126 Naples (Italy); Dip. di Scienze Farmaceutiche, Universita di Salerno, via Ponte Don Melillo, 84084 Fisciano (Saudi Arabia) (IT) and INFN sez. Napoli, via Cintia, I-80126 Naples (Italy); Dip. di Matematica ed Applicazioni, Universita di Napoli 'Federico II', via Cintia, I-80126 Naples (Italy) and INFN sez. Napoli, via Cintia, I-80126 Naples (Italy)

2006-06-15T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Generator powered electrically heated diesel particulate filter  

DOE Patents [OSTI]

A control circuit for a vehicle powertrain includes a switch that selectivity interrupts current flow between a first terminal and a second terminal. A first power source provides power to the first terminal and a second power source provides power to the second terminal and to a heater of a heated diesel particulate filter (DPF). The switch is opened during a DPF regeneration cycle to prevent the first power source from being loaded by the heater while the heater is energized.

Gonze, Eugene V; Paratore, Jr., Michael J

2014-03-18T23:59:59.000Z

242

CeraMem Filter Development Program  

SciTech Connect (OSTI)

In gasification systems, the ash and char that is suspended in the syngas stream must be removed prior to the gas stream`s introduction to other downstream air pollution control systems (e.g., hydrogen sulfide removal). The char, once captured, can be reinjected into the gasification reactors to increase the overall system efficiency. If the ash and char are not captured before the other downstream equipment, these solids can foul process piping or columns and cause downtime for the entire system. This paper describes, in general, a development program between Ceramem Separations and Foster Wheeler for a high temperature ceramic filtration system to be sold by their partnership, CeraFilter L.P. In addition, detailed test results of ceramic filters operating at conditions approaching those of high temperature combustors are discussed. The successful development of this hot gas filtration system based upon the Ceramem ceramic-membrane-coated, monolithic filter will help address the critical challenges of particulate removal under the severe conditions imposed by advanced fossil energy power systems.

Bishop, B. [CeraMem Corp., Waltham, MA (United States); Raskin, N. [CeraFilter L.P., San Diego, CA (United States)

1996-12-31T23:59:59.000Z

243

ARIES-CS COIL STRUCTURE ADVANCED FABRICATION APPROACH  

E-Print Network [OSTI]

: ARIES-CS, advanced fabrication, additive manufacturing Note: Some figures in this paper are in color with conventional means would be very challenging and costly. A new fabrication technology is "additive manufac

California at San Diego, University of

244

Design and Fabrication of Security and Home Automation System  

Science Journals Connector (OSTI)

Home automation system was designed and fabricated for controlling of home appliances, gas detection and home security. The fabricated system could detect the ... the house or office and the operation of home app...

Eung Soo Kim; Min Sung Kim

2006-01-01T23:59:59.000Z

245

Analysis of a Fabric/Desiccant Window Cavity Dehumidifier  

E-Print Network [OSTI]

This paper presents the results of an exploratory study of a fabric/desiccant window cavity dehumidifier system for possible use in commercial buildings. The objective was to evaluate fabrics commonly used in buildings, and system concepts...

Hunn, B. D.; Grasso, M. M.; Vadlamani, V.

1994-01-01T23:59:59.000Z

246

Emergency sacrificial sealing method in filters, equipment, or systems  

DOE Patents [OSTI]

A system seals a filter or equipment component to a base and will continue to seal the filter or equipment component to the base in the event of hot air or fire. The system includes a first sealing material between the filter or equipment component and the base; and a second sealing material between the filter or equipment component and the base and proximate the first sealing material. The first sealing material and the second seal material are positioned relative to each other and relative to the filter or equipment component and the base to seal the filter or equipment component to the base and upon the event of fire the second sealing material will be activated and expand to continue to seal the filter or equipment component to the base in the event of hot air or fire.

Brown, Erik P

2014-09-30T23:59:59.000Z

247

Cryogenic Dark Matter Search Detector Fabrication Process and Recent Improvements  

E-Print Network [OSTI]

A dedicated facility has been commissioned for Cryogenic Dark Matter Search (CDMS) detector fabrication at Texas A&M University (TAMU). The fabrication process has been carefully tuned using this facility and its equipment. Production of successfully tested detectors has been demonstrated. Significant improvements in detector performance have been made using new fabrication methods/equipment and tuning of process parameters.

Andrew Jastram; Rusty Harris; Rupak Mahapatra; James Phillips; Mark Platt; Kunj Prasad; Joel Sander; Sriteja Upadhyayula

2014-08-01T23:59:59.000Z

248

Cryogenic Dark Matter Search Detector Fabrication Process and Recent Improvements  

E-Print Network [OSTI]

A dedicated facility has been commissioned for Cryogenic Dark Matter Search (CDMS) detector fabrication at Texas A&M University (TAMU). The fabrication process has been carefully tuned using this facility and its equipment. Production of successfully tested detectors has been demonstrated. Significant improvements in detector performance have been made using new fabrication methods/equipment and tuning of process parameters.

Jastram, Andrew; Mahapatra, Rupak; Phillips, James; Platt, Mark; Prasad, Kunj; Sander, Joel; Upadhyayula, Sriteja

2014-01-01T23:59:59.000Z

249

Accident safety analysis for 300 Area N Reactor Fuel Fabrication and Storage Facility  

SciTech Connect (OSTI)

The purpose of the accident safety analysis is to identify and analyze a range of credible events, their cause and consequences, and to provide technical justification for the conclusion that uranium billets, fuel assemblies, uranium scrap, and chips and fines drums can be safely stored in the 300 Area N Reactor Fuel Fabrication and Storage Facility, the contaminated equipment, High-Efficiency Air Particulate filters, ductwork, stacks, sewers and sumps can be cleaned (decontaminated) and/or removed, the new concretion process in the 304 Building will be able to operate, without undue risk to the public, employees, or the environment, and limited fuel handling and packaging associated with removal of stored uranium is acceptable.

Johnson, D.J.; Brehm, J.R.

1994-01-01T23:59:59.000Z

250

OPT Optics and Metrology Fabrication Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fabrication & X-ray Laboratories Fabrication & X-ray Laboratories Search Button About Welcome Overview Visiting the APS Mission & Goals Find People Organization Charts Committees Job Openings User Information Prospective Users New Users Current Users APS User Portal Macromolecular Crystallographers Administrators Find a Beamline Apply for Beam Time Contacts Calendars Community Scientific Access Site Access Training Science & Education Science & Research Highlights Conferences Seminars Publications Annual Reports APS Upgrade Courses and Schools Graduate Programs Scientific Software Media Center Calendar of Events APS News User News Argonne/APS Press Releases Argonne/APS Feature Stories Argonne/APS In The News Article Archives APS Brochure Annual Reports Posters Podcasts Image Gallery Video Library Syndicated Feeds (RSS)

251

Miniature plastic gripper and fabrication method  

DOE Patents [OSTI]

A miniature plastic gripper actuated by inflation of a miniature balloon and method of fabricating same. The gripper is constructed of either heat-shrinkable or heat-expandable plastic tubing and is formed around a mandrel, then cut to form gripper prongs or jaws and the mandrel removed. The gripper is connected at one end with a catheter or tube having an actuating balloon at its tip, whereby the gripper is opened or closed by inflation or deflation of the balloon. The gripper is designed to removably retain a member to which is connected a quantity or medicine, plugs, or micro-components. The miniature plastic gripper is inexpensive to fabricate and can be used for various applications, such as gripping, sorting, or placing of micron-scale particles for analysis.

Benett, William J. (Livermore, CA); Krulevitch, Peter A. (Los Altos, CA); Lee, Abraham P. (Walnut Creek, CA); Northrup, Milton A. (Berkeley, CA); Folta, James A. (Livermore, CA)

1997-01-01T23:59:59.000Z

252

Fabrication method for miniature plastic gripper  

DOE Patents [OSTI]

A miniature plastic gripper is described actuated by inflation of a miniature balloon and method of fabricating same. The gripper is constructed of either heat-shrinkable or heat-expandable plastic tubing and is formed around a mandrel, then cut to form gripper prongs or jaws and the mandrel removed. The gripper is connected at one end with a catheter or tube having an actuating balloon at its tip, whereby the gripper is opened or dosed by inflation or deflation of the balloon. The gripper is designed to removably retain a member to which is connected a quantity or medicine, plugs, or micro-components. The miniature plastic gripper is inexpensive to fabricate and can be used for various applications, such as gripping, sorting, or placing of micron-scale particles for analysis. 8 figs.

Benett, W.J.; Krulevitch, P.A.; Lee, A.P.; Northrup, M.A.; Folta, J.A.

1998-07-21T23:59:59.000Z

253

Miniature plastic gripper and fabrication method  

DOE Patents [OSTI]

A miniature plastic gripper actuated by inflation of a miniature balloon and method of fabricating same are disclosed. The gripper is constructed of either heat-shrinkable or heat-expandable plastic tubing and is formed around a mandrel, then cut to form gripper prongs or jaws and the mandrel removed. The gripper is connected at one end with a catheter or tube having an actuating balloon at its tip, whereby the gripper is opened or closed by inflation or deflation of the balloon. The gripper is designed to removably retain a member to which is connected a quantity or medicine, plugs, or micro-components. The miniature plastic gripper is inexpensive to fabricate and can be used for various applications, such as gripping, sorting, or placing of micron-scale particles for analysis. 8 figs.

Benett, W.J.; Krulevitch, P.A.; Lee, A.P.; Northrup, M.A.; Folta, J.A.

1997-03-11T23:59:59.000Z

254

Fabrication method for miniature plastic gripper  

DOE Patents [OSTI]

A miniature plastic gripper actuated by inflation of a miniature balloon and method of fabricating same. The gripper is constructed of either heat-shrinkable or heat-expandable plastic tubing and is formed around a mandrel, then cut to form gripper prongs or jaws and the mandrel removed. The gripper is connected at one end with a catheter or tube having an actuating balloon at its tip, whereby the gripper is opened or dosed by inflation or deflation of the balloon. The gripper is designed to removably retain a member to which is connected a quantity or medicine, plugs, or micro-components. The miniature plastic gripper is inexpensive to fabricate and can be used for various applications, such as gripping, sorting, or placing of micron-scale particles for analysis.

Benett, William J. (Livermore, CA); Krulevitch, Peter A. (Los Altos, CA); Lee, Abraham P. (Walnut Creek, CA); Northrup, Milton A. (Berkeley, CA); Folta, James A. (Livermore, CA)

1998-01-01T23:59:59.000Z

255

Directed light fabrication of refractory metals  

SciTech Connect (OSTI)

Directed Light Fabrication (DLF) is a metal, rapid fabrication process that fuses metal powders to full density into a solid replica of a computer modeled component. It has been shown feasible for forming nearly any metal and also intermetallics to near net shape with a single process. DLF of refractory pure metals is feasible, bypassing the extensive series of conventional processing steps used for processing these high melting point materials. Tungsten, tantalum, and rhenium were processed and show a continuous resolidified microstructure. Porosity was a problem for the tantalum and rhenium powders produced by chemical reduction processes but not for the tungsten powder spherodized in a plasma arc. Chemical analysis of powder compared to the DLF deposit showed reductions in carbon, oxygen and hydrogen, indicating that process parameters may also be optimized for evolution of residual gases in the deposits.

Lewis, G.K.; Thoma, D.J.; Nemec, R.B.; Milewski, J.O. [Los Alamos National Lab., NM (United States). Materials Science and Technology Div.

1997-11-01T23:59:59.000Z

256

Ceramic Thin Films: Fabrication and Applications  

Science Journals Connector (OSTI)

...SPRAYED CERAMIC COATING, JOURNAL...PB1-XCAXTIO3 THIN-FILM GROWN BY...ELECTRICAL, OPTICAL, AND ELECTRO-OPTIC...fabrication and applications. | Ceramics...controlled optical switches...Ceramic coatings ofalumina...modified by the application of mechanical...material as a thin film cannot only...successive coatings. Although...respect to CVD that the...purposes. Applications of Thin Film Ceramics...

M. Sayer; K. Sreenivas

1990-03-02T23:59:59.000Z

257

Design and Fabrication of Nanochannel Devices  

E-Print Network [OSTI]

and Stage 2 can be shifted horizontally to x-direction by rotating the handle. Butane torch is placed under the tubing to heat it up. The inset shows the deformation of the tubing under the heat and stretching??????? ..29 Fig. 12 SEM images... pace. In 1990s, a research interest in fluid handling microchannel devices boosted because of their genomics application and potential capability in bio/chemical agent detection. Now the fabrication techniques have pushed those devices down...

Wang, Miao

2010-10-12T23:59:59.000Z

258

Method to fabricate hollow microneedle arrays  

DOE Patents [OSTI]

An inexpensive and rapid method for fabricating arrays of hollow microneedles uses a photoetchable glass. Furthermore, the glass hollow microneedle array can be used to form a negative mold for replicating microneedles in biocompatible polymers or metals. These microneedle arrays can be used to extract fluids from plants or animals. Glucose transport through these hollow microneedles arrays has been found to be orders of magnitude more rapid than natural diffusion.

Kravitz, Stanley H. (Placitas, NM); Ingersoll, David (Albuquerque, NM); Schmidt, Carrie (Los Lunas, NM); Flemming, Jeb (Albuquerque, NM)

2006-11-07T23:59:59.000Z

259

Schottky barrier MOSFET systems and fabrication thereof  

DOE Patents [OSTI]

(MOS) device systems-utilizing Schottky barrier source and drain to channel region junctions are disclosed. Experimentally derived results which demonstrate operation of fabricated N-channel and P-channel Schottky barrier (MOSFET) devices, and of fabricated single devices with operational characteristics similar to (CMOS) and to a non-latching (SRC) are reported. Use of essentially non-rectifying Schottky barriers in (MOS) structures involving highly doped and the like and intrinsic semiconductor to allow non-rectifying interconnection of, and electrical accessing of device regions is also disclosed. Insulator effected low leakage current device geometries and fabrication procedures therefore are taught. Selective electrical interconnection of drain to drain, source to drain, or source to source, of N-channel and/or P-channel Schottky barrier (MOSFET) devices formed on P-type, N-type and Intrinsic semiconductor allows realization of Schottky Barrier (CMOS), (MOSFET) with (MOSFET) load, balanced differential (MOSFET) device systems and inverting and non-inverting single devices with operating characteristics similar to (CMOS), which devices can be utilized in modulation, as well as in voltage controled switching and effecting a direction of rectification.

Welch, James D. (10328 Pinehurst Ave., Omaha, NE 68124)

1997-01-01T23:59:59.000Z

260

Fabrication of brittle materials -- current status  

SciTech Connect (OSTI)

The research initiatives in the area of precision fabrication will be continued in the upcoming year. Three students, T. Bifano (PhD), P. Blake (PhD) and E. Smith (MS), finished their research programs in the last year. Sections 13 and 14 will summarize the essential results from the work of the Materials Engineering students Blake and Smith. Further details will be presented in forthcoming publications that are now in preparation. The results from Bifano`s thesis have been published in adequate detail and need not be summarized further. Three new students, S. Blackley (MS), H. Paul (PhD), and S. Smith (PhD) have joined the program and will continue the research efforts in precision fabrication. The programs for these students will be outlined in Sections 15 and 16. Because of the success of the earlier work in establishing new process models and experimental techniques for the study of diamond turning and diamond grinding, the new programs will, in part, build upon the earlier work. This is especially true for investigations concerned with brittle materials. The basic understanding of material response of nominally brittle materials during machining or grinding operations remains as a challenge. The precision fabrication of brittle materials will continue as an area of emphasis for the Precision Engineering Center.

Scattergood, R.O.

1988-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Mercury control challenge for industrial boiler MACT affected facilities  

SciTech Connect (OSTI)

An industrial coal-fired boiler facility conducted a test program to evaluate the effectiveness of sorbent injection on mercury removal ahead of a fabric filter with an inlet flue gas temperature of 375{sup o}F. The results of the sorbent injection testing are essentially inconclusive relative to providing the facility with enough data upon which to base the design and implementation of permanent sorbent injection system(s). The mercury removal performance of the sorbents was significantly less than expected. The data suggests that 50 percent mercury removal across a baghouse with flue gas temperatures at or above 375{sup o}F and containing moderate levels of SO{sub 3} may be very difficult to achieve with activated carbon sorbent injection alone. The challenge many coal-fired industrial facilities may face is the implementation of additional measures beyond sorbent injection to achieve high levels of mercury removal that will likely be required by the upcoming new Industrial Boiler MACT rule. To counter the negative effects of high flue gas temperature on mercury removal with sorbents, it may be necessary to retrofit additional boiler heat transfer surface or spray cooling of the flue gas upstream of the baghouse. Furthermore, to counter the negative effect of moderate or high SO{sub 3} levels in the flue gas on mercury removal, it may be necessary to also inject sorbents, such as trona or hydrated lime, to reduce the SO{sub 3} concentrations in the flue gas. 2 refs., 1 tab.

NONE

2009-09-15T23:59:59.000Z

262

Fail save shut off valve for filtering systems employing candle filters  

DOE Patents [OSTI]

The invention relates to an apparatus that acts as a fail save shut off valve. More specifically, the invention relates to a fail save shut off valve that allows fluid flow during normal operational conditions, but prevents the flow of fluids in the event of system failure upstream that causes over-pressurization. The present invention is particularly well suited for use in conjunction with hot gas filtering systems, which utilize ceramic candle filters. Used in such a hot gas system the present invention stops the flow of hot gas and prevents any particulate laden gas from entering the clean side of the system.

VanOsdol, John (Fairmont, WV)

2006-01-03T23:59:59.000Z

263

Fail Save Shut Off Valve for Filtering Systems Employing Candle Filters  

DOE Patents [OSTI]

The invention relates to an apparatus that acts as a fail save shut off valve. More specifically, the invention relates to a fail save shut off valve that allows fluid flow during normal operational conditions, but prevents the flow of fluids in the event of system failure upstream that causes over-pressurization. The present invention is particularly well suited for use in conjunction with hot gas filtering systems, which utilize ceramic candle filters. Used in such a hot gas system the present invention stops the flow of hot gas and prevents any particulate laden gas from entering the clean side of the system.

VanOsdol, John

2006-01-03T23:59:59.000Z

264

Qualifications of Candle Filters for Combined Cycle Combustion Applications  

SciTech Connect (OSTI)

The direct firing of coal produces particulate matter that has to be removed for environmental and process reasons. In order to increase the current advanced coal combustion processes, under the U.S. Department of Energy's auspices, Siemens Westinghouse Power Corporation (SWPC) has developed ceramic candle filters that can operate at high temperatures. The Coal Research Center of Southern Illinois University (SIUC), in collaboration with SWPC, developed a program for long-term filter testing at the SIUC Steam Plant followed by experiments using a single-filter reactor unit. The objectives of this program funded by the U.S. Department of Energy were to identify and demonstrate the stability of porous candle filter elements for use in high temperature atmospheric fluidized-bed combustion (AFBC) process applications. These verifications were accomplished through extended time slipstream testing of a candle filter array under AFBC conditions using SIUC's existing AFBC boiler. Temperature, mass flow rate, and differential pressure across the filter array were monitored for a duration of 45 days. After test exposure at SIUC, the filter elements were characterized using Scanning Electron Microscopy and BET surface area analyses. In addition, a single-filter reactor was built and utilized to study long term filter operation, the permeability exhibited by a filter element before and after the slipstream test, and the thermal shock resilience of a used filter by observing differential pressure changes upon rapid heating and cooling of the filter. The data acquired during the slipstream test and the post-test evaluations demonstrated the suitability of filter elements in advanced power generation applications.

Tomasz Wiltowski

2008-08-31T23:59:59.000Z

265

Dynamic data filtering system and method  

DOE Patents [OSTI]

A computer-implemented dynamic data filtering system and method for selectively choosing operating data of a monitored asset that modifies or expands a learned scope of an empirical model of normal operation of the monitored asset while simultaneously rejecting operating data of the monitored asset that is indicative of excessive degradation or impending failure of the monitored asset, and utilizing the selectively chosen data for adaptively recalibrating the empirical model to more accurately monitor asset aging changes or operating condition changes of the monitored asset.

Bickford, Randall L; Palnitkar, Rahul M

2014-04-29T23:59:59.000Z

266

Filter system cost comparison for IGCC and PFBC power systems  

SciTech Connect (OSTI)

A cost comparison was conducted between the filter systems for two advanced coal-based power plants. The results from this study are presented. The filter system is based on a Westinghouse advanced particulate filter concept, which is designed to operate with ceramic candle filters. The Foster Wheeler second-generation 453 MWe (net) pressurized fluidized-bed combustor (PFBC) and the KRW 458 MWe (net) integrated gasification combined cycle (IGCC) power plants are used for the comparison. The comparison presents the general differences of the two power plants and the process-related filtration conditions for PFBC and IGCC systems. The results present the conceptual designs for the PFBC and IGCC filter systems as well as a cost summary comparison. The cost summary comparison includes the total plant cost, the fixed operating and maintenance cost, the variable operating and maintenance cost, and the effect on the cost of electricity (COE) for the two filter systems.

Dennis, R.A.; McDaniel, H.M.; Buchanan, T. [and others

1995-12-01T23:59:59.000Z

267

Optical ranked-order filtering using threshold decomposition  

DOE Patents [OSTI]

A hybrid optical/electronic system performs median filtering and related ranked-order operations using threshold decomposition to encode the image. Threshold decomposition transforms the nonlinear neighborhood ranking operation into a linear space-invariant filtering step followed by a point-to-point threshold comparison step. Spatial multiplexing allows parallel processing of all the threshold components as well as recombination by a second linear, space-invariant filtering step. An incoherent optical correlation system performs the linear filtering, using a magneto-optic spatial light modulator as the input device and a computer-generated hologram in the filter plane. Thresholding is done electronically. By adjusting the value of the threshold, the same architecture is used to perform median, minimum, and maximum filtering of images. A totally optical system is also disclosed. 3 figs.

Allebach, J.P.; Ochoa, E.; Sweeney, D.W.

1987-10-09T23:59:59.000Z

268

Optical ranked-order filtering using threshold decomposition  

DOE Patents [OSTI]

A hybrid optical/electronic system performs median filtering and related ranked-order operations using threshold decomposition to encode the image. Threshold decomposition transforms the nonlinear neighborhood ranking operation into a linear space-invariant filtering step followed by a point-to-point threshold comparison step. Spatial multiplexing allows parallel processing of all the threshold components as well as recombination by a second linear, space-invariant filtering step. An incoherent optical correlation system performs the linear filtering, using a magneto-optic spatial light modulator as the input device and a computer-generated hologram in the filter plane. Thresholding is done electronically. By adjusting the value of the threshold, the same architecture is used to perform median, minimum, and maximum filtering of images. A totally optical system is also disclosed.

Allebach, Jan P. (West Lafayette, IN); Ochoa, Ellen (Pleasanton, CA); Sweeney, Donald W. (Alamo, CA)

1990-01-01T23:59:59.000Z

269

METC/3M Cooperative Agreement CRADA 94-024 high temperature high pressure filter materials exposure test program. Volume 1, Final report  

SciTech Connect (OSTI)

In conjunction with shakedown, operation, and desulfurization testing at the Morgantown Energy Technology Center (METC) 10 in. Fluid Bed Gasification and Cleanup facility, a series of tests was completed in cooperation with the Minnesota Mining and Manufacturing Company (3M). This cooperative research and development agreement (CRADA) between METC and 3M was to evaluate exposure of 3M SICONEX{trademark} fiber-reinforced ceramic and NEXTEL{trademark} 312 and 550 ceramic fabric materials to a gasifying environment at high temperatures (1000--1100{degree}F) and high pressure (300 psia). Minnesota Mining and Manufacturing Company (3M) provided two 60 mm I.D. {times} 0.5 m SICONEX{trademark} spools and one each of the NEXTEL{trademark} 312 and 550 ceramic fabrics for exposure to coal gas from the METC gasifier. METC installed the materials in a vessel existing in the METC Cleanup Facility and provided process data in exchange for ceramic filter and ash/char characterization. Details of the CRADA are found in CRADA 94-024. This report contains METC`s contribution to CRADA 94-024. Four gasifier runs were conducted over a five month period to accumulate 483 hours of operation. During this time, 2 LayCer{trademark} 70/3 filters were used for filtering the coal gas while the SICONEX{trademark} and NEXTEL{trademark} were exposed along side of the filters. During one 89 hour test, one Laycer{trademark} 70/3 candle was installed with a 3M ceramic composite filter. The face velocity through the candles was maintained nominally at 2.5 ft/min throughout the testing.

NONE

1995-06-01T23:59:59.000Z

270

Evaluation of a Cyclone and Hot Gas Filter System  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

a Cyclone and a Cyclone and Hot Gas Filter System Description The Wabash River Coal Gasification Plant uses an oxygen-blown E-Gas gasifier technology, owned by ConocoPhillips, which produces fuel gas containing significant amounts of fine particulates. Currently, particulates are cleaned from the fuel gas with metal candle filters. These filters require two costly plant shut-downs per year for cleaning or replacement. During the U.S Department of Energy-supported project

271

De-dusting Filter Bags Reduce Indian Petcoke Mill Emissions  

Science Journals Connector (OSTI)

BWF Envirotec has installed more than 400 filter bags in a pulse jet clean filter system at an Indian industrial mill producing petroleum coke, a fuel commonly used in rotary kilns for cement production. The pulse jet filter separates the fine grain ‘petcoke’ product from the exhaust gases escaping out of the mill. The installation by the German-based company has reduced the mill’s measured emissions over the last nine months to under 10 mg/Nm3.

2003-01-01T23:59:59.000Z

272

Method of recovering hazardous waste from phenolic resin filters  

DOE Patents [OSTI]

The invention is a process for the recovery of hazardous wastes such as heavy metals and radioactive elements from phenolic resin filter by a circulating a solution of 8 to 16 molar nitric acid at a temperature of 110 to 190 degrees F. through the filter. The hot solution dissolves the filter material and releases the hazardous material so that it can be recovered or treated for long term storage in an environmentally safe manner.

Meikrantz, David H. (Idaho Falls, ID); Bourne, Gary L. (Idaho Falls, ID); McFee, John N. (Albuquerque, NM); Burdge, Bradley G. (Idaho Falls, ID); McConnell, Jr., John W. (Idaho Falls, ID)

1991-01-01T23:59:59.000Z

273

DEVELOPMENT OF AN ADHESIVE CANDLE FILTER SAFEGUARD DEVICE  

SciTech Connect (OSTI)

In order to reach the highest possible efficiencies in a coal-fired turbine-based power system, the turbine should be directly fired with the products of coal conversion. Two main types of systems employ these turbines: those based on pressurized fluidized-bed combustors and those based on integrated gasification combined cycles. In both systems, suspended particulates must be cleaned from the gas stream before it enters the turbine so as to prevent fouling and erosion of the turbine blades. To produce the cleanest gas, barrier filters are being developed and are in use in several facilities. Barrier filters are composed of porous, high-temperature materials that allow the hot gas to pass but collect the particulates on the surface. The three main configurations of the barrier filters are candle, cross-flow, and tube filters. Both candle and tube filters have been tested extensively. They are composed of coarsely porous ceramic that serves as a structural support, overlain with a thin, microporous ceramic layer on the dirty gas side that serves as the primary filter surface. They are highly efficient at removing particulate matter from the gas stream and, because of their ceramic construction, are resistant to gas and ash corrosion. However, ceramics are brittle and individual elements can fail, allowing particulates to pass through the hole left by the filter element and erode the turbine. Preventing all failure of individual ceramic filter elements is not possible at the present state of development of the technology. Therefore, safeguard devices (SGDs) must be employed to prevent the particulates streaming through occasional broken filters from reaching the turbine. However, the SGD must allow for the free passage of gas when it is not activated. Upon breaking of a filter, the SGD must either mechanically close or quickly plug with filter dust to prevent additional dust from reaching the turbine. Production of a dependable rapidly closing autonomous mechanical device at high temperatures in a dusty gas stream is difficult because of problems with materials corrosion, dust leakage, and detection of filter failure. Therefore, the Energy & Environmental Research Center is using its knowledge of the factors that make filter dust sticky at gas filtration temperatures to make a simple and inexpensive SGD that employs an adhesive yet thermodynamically stable coating on a highly porous ceramic substrate. The SGDs are placed on top of individual candle filters at the filtered gas exit. Upon failure of the filter, the dirty gas flows through the SGD where the adhesive surface rapidly and permanently traps dust particles, causing the device to plug and prevent the dust from reaching the turbine.

John P. Hurley; Ann K. Henderson; Jan W. Nowok; Michael L. Swanson

2002-01-01T23:59:59.000Z

274

Scheduling and allocation algorithm for an elliptic filter  

E-Print Network [OSTI]

A new evolutionary algorithm for scheduling and allocation algorithm is developed for an elliptic filter. The elliptic filter is scheduled and allocated in the proposed work which is then compared with the different scheduling algorithms like As Soon As Possible algorithm, As Late As Possible algorithm, Mobility Based Shift algorithm, FDLS, FDS and MOGS. In this paper execution time and resource utilization is calculated using different scheduling algorithm for an Elliptic Filter and reported that proposed Scheduling and Allocation increases the speed of operation by reducing the control step. The proposed work to analyse the magnitude, phase and noise responses for different scheduling algorithm in an elliptic filter.

Marikkannan, Sangeetha

2012-01-01T23:59:59.000Z

275

New Cordierite Diesel Particulate Filters for Catalyzed and Non...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

RESEARCH CONFERENCE (DEER 2006) PRESENTATIONS Combination and Integration of DPF-SCR Aftertreatment Technologies Advanced High Porosity Ceramic Honeycomb Wall Flow Filters...

276

Synthesis of all-pass filters by codirectional grating couplers  

Science Journals Connector (OSTI)

It is well known that soliton shapes result from reflectionless potentials. We propose a new technique for the synthesis of all-pass codirectional filter gratings that yields...

Peral, E; Capmany, J; Marti, J

1997-01-01T23:59:59.000Z

277

Compact cyclone filter train for radiological and hazardous environments  

DOE Patents [OSTI]

A compact cyclone filter train for the removal of hazardous and radiologi particles from a gaseous fluid medium which permits a small cyclone separator to be used in a very small space envelope due to the arrangement of the filter housing adjacent to the separator with the cyclone separator and the filters mounted on a plate. The entire unit will have a hoist connection at the center of gravity so that the entire unit including the separator, the filters, and the base can be lifted and repositioned as desired.

Bench, Thomas R. (Pittsburgh, PA)

1998-01-01T23:59:59.000Z

278

Optimal Filters for High-Speed Compressive Detection in ...  

E-Print Network [OSTI]

Feb 28, 2013 ... In this paper, we focus on the selection of optimal filters and measurement times to ... nonlinear optics–based chemical and materials analysis.

2013-02-14T23:59:59.000Z

279

MobiCleanTM Soot Filter for Diesel Locomotiive Applications  

Broader source: Energy.gov (indexed) [DOE]

is trapped on the surface of a catalyzed, high temperature, wall flow, porous Silicon Carbide filter. Silicon Carbide provides superior thermal durability over metal fiber and...

280

A Standard Soot Generator for Diesel Particulate Filter Testing  

Broader source: Energy.gov (indexed) [DOE]

CAMBUSTION A Standard Soot Generator for Diesel Particulate Filter Testing Poster - P10 Diesel Engine Emission Reduction Conference 2007 Chris Nickolaus ...

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Engine Tests of an Active PM Filter Regeneration System | Department...  

Broader source: Energy.gov (indexed) [DOE]

System 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters 2005deernickolas.pdf More Documents & Publications Diesel Particulate Filter: A...

282

Modulated power filter compensator for a small renewable wind energy.  

E-Print Network [OSTI]

??This paper has three sections, the first one is related to wind energy, the second is related to power filters used to mitigate the harmonics,… (more)

Almadhi, Bassil

2015-01-01T23:59:59.000Z

283

Implementation and application of NDE on ceramic candle filters.  

E-Print Network [OSTI]

??A nondestructive evaluation (NDE) technique has been developed to determine the deterioration and remaining life of full-size ceramic candle filters used at the Power System… (more)

Kiriakidis, Alejandro C., 1971-

2003-01-01T23:59:59.000Z

284

Future Trends for DPF?SCR On-Filter (SCRF)  

Broader source: Energy.gov [DOE]

Fundamental and application-relevant test data gathered on SCRF filters , along with coating distribution, NOx conversion, pressure drop data, and engine tests, will be discussed.

285

High-frequency filtered images of an optically thick edge  

Science Journals Connector (OSTI)

Peculiarities of high-frequency filtering (contouring) of images of symmetric thick (extended along the optical axis) edge are investigated in analytical form by the Kirchhoff–Fresnel...

Chugui, Yu V; Sokolov, V A

1998-01-01T23:59:59.000Z

286

Non-Destructive Neutron Imaging to Analyze Particulate Filters  

Broader source: Energy.gov [DOE]

Non-destructive, non-invasive imaging is being employed in the laboratory to understand how soot, ash, and catalytic washcoat are deposited within a diesel particulate filter.

287

Improvement and Simplification of Diesel Particulate Filter System...  

Broader source: Energy.gov (indexed) [DOE]

FBC Improve the ash management (filter) Simplify the onboard dosing system and decrease cost and Chemist Ceramist Fuel system specialist Improve the vehicle integration for a Fit...

288

Sparsity Optimization in Design of Multidimensional Filter Networks  

E-Print Network [OSTI]

A FIR filter is represented in the spatial domain by a limited-size kernel defined by a ...... Muthukrishnan S (2005) Data streams: algorithms and applications.

2014-11-22T23:59:59.000Z

289

Diesel Soot Filter Characterization and Modeling for Advanced...  

Broader source: Energy.gov (indexed) [DOE]

Reactor regeneration of soot loaded catalyzed SCF * Micro-model of soot oxidation versus spatial catalyst loading. 7 2008 DOE OVT Merit Review Diesel Soot Filter Characterization...

290

Biodiesel Effects on Diesel Particle Filter Performance: Milestone Report  

SciTech Connect (OSTI)

Research results on the performance of biodiesel and biodiesel blends with ultra-low sulfur diesel (ULSD) and a diesel particle filter (DPF).

Williams, A.; McCormick, R. L.; Hayes, R.; Ireland, J.

2006-03-01T23:59:59.000Z

291

Optofluidic-Tunable Color Filters And Spectroscopy Based On Liquid...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Based On Liquid-Crystal Microflows. Abstract: The integration of color filters with microfluidics has attracted substantial attention in recent years, for on-chip absorption,...

292

Performance of standard rate trickling filters at various depths  

E-Print Network [OSTI]

of '. he filter media+ The relathnship between removals snd applied loads for each of the units is Unearth they are represented in figso 8 to 15? The action inside each filter is somewhat s axzey The zeduction of suspended solids was satisfaoto... triokling filters . at ths Sewage Treat3sent Plant of' k and 5 College of Tax@st The criteria used for detsrsLining filter performance were reseval of' applied S, O. D?, renoval of suspended, solids, and rsaoval of volatile natter+ Ts; ts wsrs na;. 's...

Peralta-Rojas, Andres

1955-01-01T23:59:59.000Z

293

Optimal design of AC filter circuits in HVDC converter stations  

SciTech Connect (OSTI)

This paper investigates the reactive power as well as the harmonic conditions on both the valve and the AC-network sides of a HVDC converter station. The effect of the AC filter circuits is accurately modeled. The program is then augmented by adding an optimization routine. It can identify the optimal filter configuration, yielding the minimum current distortion factor at the AC network terminals for a prespecified fundamental reactive power to be provided by the filter. Several parameter studies were also conducted to illustrate the effect of accidental or intentional deletion of one of the filter branches.

Saied, M.M.; Khader, S.A. [Kuwait Univ. (Kuwait). Electrical and Computer Engineering Dept.

1995-12-31T23:59:59.000Z

294

Multijunction photovoltaic device and fabrication method  

DOE Patents [OSTI]

A multijunction photovoltaic device includes first and second amorphous silicon PIN photovoltaic cells in a stacked arrangement. An interface layer, composed of a doped silicon compound, is disposed between the two cells and has a lower bandgap than the respective n- and p-type adjacent layers of the first and second cells. The interface layer forms an ohmic contact with the one or the adjacent cell layers of the same conductivity type, and a tunnel junction with the other of the adjacent cell layers. The disclosed device is fabricated by a glow discharge process.

Arya, Rajeewa R. (Jamison, PA); Catalano, Anthony W. (Furlong, PA)

1993-09-21T23:59:59.000Z

295

Anchored nanostructure materials and method of fabrication  

DOE Patents [OSTI]

Anchored nanostructure materials and methods for their fabrication are described. The anchored nanostructure materials may utilize nano-catalysts that include powder-based or solid-based support materials. The support material may comprise metal, such as NiAl, ceramic, a cermet, or silicon or other metalloid. Typically, nanoparticles are disposed adjacent a surface of the support material. Nanostructures may be formed as anchored to nanoparticles that are adjacent the surface of the support material by heating the nano-catalysts and then exposing the nano-catalysts to an organic vapor. The nanostructures are typically single wall or multi-wall carbon nanotubes.

Seals, Roland D; Menchhofer, Paul A; Howe, Jane Y; Wang, Wei

2012-11-27T23:59:59.000Z

296

Fabrication of faceted nanopores in magnesium  

SciTech Connect (OSTI)

In this paper, using high resolution transmission electron microscopy, we showed the fabrication of faceted nanopores with various shapes in magnesium by focused electron beam (e-beam). The characteristics of nanopore shapes and the crystallographic planes corresponding to the edges of the nanopores were discussed in detail. Interestingly, by manipulating the e-beam (e.g., irradiation direction and duration), the nanopore shape and size could be effectively controlled along different directions. Our results provide important insight into the nanopore patterning in metallic materials and are of fundamental importance concerning the relevant applications, such as nanopore-based sensor, etc.

Wu, Shujing; Cao, Fan; Zheng, He; Sheng, Huaping; Liu, Chun; Liu, Yu; Zhao, Dongshan; Wang, Jianbo, E-mail: wang@whu.edu.cn [School of Physics and Technology, Center for Electron Microscopy and MOE Key Laboratory of Artificial Micro- and Nano-Structures, Wuhan University, Wuhan 430072 (China)] [School of Physics and Technology, Center for Electron Microscopy and MOE Key Laboratory of Artificial Micro- and Nano-Structures, Wuhan University, Wuhan 430072 (China)

2013-12-09T23:59:59.000Z

297

Design considerations for a ceramic fabric radiator  

SciTech Connect (OSTI)

The design of an Advanced Ceramic Fabric (ACF) thermal management device for use in both interplanetary and near-earth space must consider several important aspects of the environment. First, the radiation field at various locations is dominated by a proton component which deposits its energy on the surface of the device. Second, the ACF materials, as well as pressure liner materials, must also be compatible with the working fluids selected for the system. Third, the fluid dynamics and heat transfer characteristics of this device should be adequately characterized. With the proper consideration of materials and operating conditions, the Bubble Membrane Radiator (BMR) may be utilized for several advanced space missions. 17 refs.

Pauley, K.A.; Webb, B.J. (Pacific Northwest Lab., Richland, WA (USA)); Klein, A.C. (Oregon State Univ., Corvallis, OR (USA). Dept. of Nuclear Engineering)

1990-04-01T23:59:59.000Z

298

Fabrication of transparent ceramics using nanoparticles  

DOE Patents [OSTI]

A method of fabrication of a transparent ceramic using nanoparticles synthesized via organic acid complexation-combustion includes providing metal salts, dissolving said metal salts to produce an aqueous salt solution, adding an organic chelating agent to produce a complexed-metal sol, heating said complexed-metal sol to produce a gel, drying said gel to produce a powder, combusting said powder to produce nano-particles, calcining said nano-particles to produce oxide nano-particles, forming said oxide nano-particles into a green body, and sintering said green body to produce the transparent ceramic.

Cherepy, Nerine J; Tillotson, Thomas M; Kuntz, Joshua D; Payne, Stephen A

2012-09-18T23:59:59.000Z

299

Method of fabricating bifacial tandem solar cells  

DOE Patents [OSTI]

A method of fabricating on a semiconductor substrate bifacial tandem solar cells with semiconductor subcells having a lower bandgap than the substrate bandgap on one side of the substrate and with subcells having a higher bandgap than the substrate on the other including, first, growing a lower bandgap subcell on one substrate side that uses only the same periodic table group V material in the dislocation-reducing grading layers and bottom subcells as is present in the substrate and after the initial growth is complete and then flipping the substrate and growing the higher bandgap subcells on the opposite substrate side which can be of different group V material.

Wojtczuk, Steven J; Chiu, Philip T; Zhang, Xuebing; Gagnon, Edward; Timmons, Michael

2014-10-07T23:59:59.000Z

300

{open_quotes}Fine particulate control and air toxics{close_quotes}  

SciTech Connect (OSTI)

Tables 1-4 give an overview of current TSP control capabilities of fabric filters on some applications. Very little data is available as to the control of PM{sub 10} and under. Most air toxic limitations will require much higher control as can be seen in Tables 5 and 6. The control of most air toxics is definitely related to the control of TSP and PM{sub 10}, however it appears that meeting current limits of TSP do not ensure meeting the desired air toxic limits. Since TSP is desired to be used as a surrogate and is all that is routinely monitored through opacity or other stack CEM systems, lower TSP limits would have to be met which opens the question of how accurate we can monitor TSP or PM{sub 10} on a continuous basis. Tables 3 and 4 provide some insight as to the uniformity of TSP results between identical operating units and over time at two NSW installation. Except for the 9/10/91 test, the baghouses were inspected for failing bags prior to testing. Tables 7 and 8 show the impact of TSP and air toxic metals of a plant upset. In this case it took up to one day for the emissions to return to normal following a 30 minute complete shutdown of the incinerator and three baghouse systems being tested. Table 9 describes the impact of broken bags on emissions for a typical size baghouse. As emission levels become tighter in attempts to control air toxics, response to broken bags will take on new importance. More importantly, system design changes to promote longer bag life and better emission monitoring will be needed. Once continuous monitoring of outlet particulate is required, the industry will be challenged. Until then it will be business as usual with designs aimed at passing a one time or yearly stack test with the baghouse primed for peak performance. This won`t do much to protect the environment from air toxics to the proposed units.

Chang, R. [Electric Power Research Institute, Palo Alto, CA (United States); Greiner, G.P. [ETS International, Inc., Roanoke, VA (United States); Harrison, W. [Southern Company Services, Birmingham, AL (United States); Nichols, G.B. [Southern Research Institute, Birmingham, AL (United States)

1994-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

System Effects of High Efficiency Filters in Homes  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

System Effects of High Efficiency Filters in Homes System Effects of High Efficiency Filters in Homes Title System Effects of High Efficiency Filters in Homes Publication Type Conference Paper LBNL Report Number LBNL-6144E Year of Publication 2013 Authors Walker, Iain S., Darryl J. Dickerhoff, David Faulkner, and William J. N. Turner Conference Name ASHRAE Annual Conference Date Published 03/2013 Abstract Occupant concern about indoor air quality (IAQ) issues has led to the increased use of more effective air filters in residential heating and cooling systems. A drawback of improved filtration is that better filters tend to have more flow resistance. This can lead to lower system airflows that reduce heat exchanger efficiency, increase duct pressure that leads to increased air leakage for ducts and, in some case s, increased blower power consumption. There is currently little knowledge on the magnitude of these effects. In this study, the performance of ten central forced air systems was monitored for a year. The systems used either a Permanent Split Capacitor (PSC) or a Brushless Permanent Magnet (BPM) blower. Each system was operated with a range of filter efficiencies ranging from MERV 6 (the lowest currently permitted in ASHRAE Standard 62.2) up to MERV 16. Measurements were recorded every ten seconds for blower power, filter pressure drop, supply and return plenum pressures together with plenum and indoor temperatures. These detailed continuous measurements allowed observation of filter loading effects as well as the initial change in system performance when filters were swapped. The results of the field measurements were used in simulations to examine more general system performance effects for a wider range of climates. The field tests showed that system static pressures were highly influenced by filter selection, filter loading rates varied more from house to house than by MERV rating and overall were quite low in many of the homes. PSC motors showed reduced power and airflow as the filters loaded, but BPM motors attempted to maintain a constant airflow and increased their power to do so. The combined field test and simulation results from this study indicate that for MERV 10-13 filters the effects on energy use are small (5%) and usability. In systems using low MERV filters that are already close to blower performance limits the addition of a MERV 16 filter pushed the blowers to their performance limits.

302

Argonne National Laboratory - West's approach to filter characterization.  

SciTech Connect (OSTI)

Like other DOE facilities, ANL-W uses a variety of nuclear grade, industrial grade, or furnace-type particulate filters to control airborne radioactivity and hazardous contaminants in radiological containment structures or processes. As designed, these filters entrain and ultimately concentrate contaminants in the media. Toxic metal contaminants include cadmium, chromium, lead; and mercury present in sufficient concentrations to exhibit the hazardous waste characteristic of toxicity as defined in 40 CFR 261.24. Radionuclide contaminants deposited in the media may at times accumulate in sufficient quantity to classify the filter as transuranic or remote-handled waste. Upon their removal from the ventilation system, these particulate filters become wastes, which must be characterized to determine their hazardous and radioactive classifications. A well defined filter characterization process is essential for the proper/consistent waste characterization and minimization and for maintaining personnel radiological exposures as-low-as-reasonably-achievable (ALARA) (1,2). ANL-W has developed an approach to filter sampling and characterization to meet these needs. The ANL-W filter sampling and characterization process is designed to ensure representative sampling and/or process knowledge is utilized in characterizing the filters. The data obtained through sampling and/or process knowledge is used to show compliance with the Resource Conservation and Recovery Act (3) and Treatment/Storage/Disposal Facility Waste Acceptance Criteria. The ANL-W filter characterization involves the collection of process information, filter handling and sampling, sample analysis, data management filter characterization, and waste handling. Each element of the process is streamlined to ensure proper characterization while minimizing radiological exposure to maintenance workers, samplers, laboratory personnel, and waste handlers.

Miller, T. A.

1999-02-10T23:59:59.000Z

303

Sacrificial template method of fabricating a nanotube  

DOE Patents [OSTI]

Methods of fabricating uniform nanotubes are described in which nanotubes were synthesized as sheaths over nanowire templates, such as using a chemical vapor deposition process. For example, single-crystalline zinc oxide (ZnO) nanowires are utilized as templates over which gallium nitride (GaN) is epitaxially grown. The ZnO templates are then removed, such as by thermal reduction and evaporation. The completed single-crystalline GaN nanotubes preferably have inner diameters ranging from 30 nm to 200 nm, and wall thicknesses between 5 and 50 nm. Transmission electron microscopy studies show that the resultant nanotubes are single-crystalline with a wurtzite structure, and are oriented along the <001> direction. The present invention exemplifies single-crystalline nanotubes of materials with a non-layered crystal structure. Similar "epitaxial-casting" approaches could be used to produce arrays and single-crystalline nanotubes of other solid materials and semiconductors. Furthermore, the fabrication of multi-sheath nanotubes are described as well as nanotubes having multiple longitudinal segments.

Yang, Peidong (Berkeley, CA); He, Rongrui (Berkeley, CA); Goldberger, Joshua (Berkeley, CA); Fan, Rong (El Cerrito, CA); Wu, Yi-Ying (Albany, CA); Li, Deyu (Albany, CA); Majumdar, Arun (Orinda, CA)

2007-05-01T23:59:59.000Z

304

EA-0534: Radioisotope Heat Source Fuel Processing and Fabrication, Los  

Broader source: Energy.gov (indexed) [DOE]

4: Radioisotope Heat Source Fuel Processing and Fabrication, 4: Radioisotope Heat Source Fuel Processing and Fabrication, Los Alamos, New Mexico EA-0534: Radioisotope Heat Source Fuel Processing and Fabrication, Los Alamos, New Mexico SUMMARY This EA evaluates the environmental impacts of a proposal to operate existing Pu-238 processing facilities at Savannah River Site, and fabricate a limited quantity of Pu-238 fueled heat sources at an existing facility at U.S. Department of Energy's Los Alamos National Laboratory. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD July 19, 1991 EA-0534: Finding of No Significant Impact Radioisotope Heat Source Fuel Processing and Fabrication July 19, 1991 EA-0534: Final Environmental Assessment Radioisotope Heat Source Fuel Processing and Fabrication

305

Electromagnetic interference filter for automotive electrical systems  

DOE Patents [OSTI]

A filter for an automotive electrical system includes a substrate having first and second conductive members. First and second input terminals are mounted to the substrate. The first input terminal is electrically connected to the first conductive member, and the second input terminal is electrically connected to the second conductive member. A plurality of capacitors are mounted to the substrate. Each of the capacitors is electrically connected to at least one of the first and second conductive members. First and second power connectors are mounted to the substrate. The first power connector is electrically connected to the first conductive member, and the second power connector is electrically connected to the second conductive member. A common mode choke is coupled to the substrate and arranged such that the common mode choke extends around at least a portion of the substrate and the first and second conductive members.

Herron, Nicholas Hayden; Carlson, Douglas S; Tang, David; Korich, Mark D

2013-07-02T23:59:59.000Z

306

Model-Based Commissioning for Filters in Room Air Conditioners  

E-Print Network [OSTI]

This paper proposes a model that can estimate filter resistance. Two sorts of value are used as inputs to estimate filter resistance. One is the power consumed by the fan in the indoor unit and the other is the thermal performance. For the room air...

Wang, F.; Yoshida, H.; Kitagawa, H.; Matsumoto, K.; Goto, K.

2004-01-01T23:59:59.000Z

307

Biomass Control in Waste Air Biotrickling Filters by Protozoan Predation  

E-Print Network [OSTI]

Biomass Control in Waste Air Biotrickling Filters by Protozoan Predation Huub H. J. Cox, Marc A as a means of biomass control. Wet biomass for- mation in 23.6-L reactors over a 77-day period was reduced in the biotrickling filter enriched with protozoa. The lower rate of biomass accumulation after the addi- tion

308

Tunable negative-tap photonic microwave filter based on a  

E-Print Network [OSTI]

Tunable negative-tap photonic microwave filter based on a cladding-mode coupler and an optically injected laser of large detuning Sze-Chun Chan,* Qing Liu, Zhu Wang, and Kin Seng Chiang Department: A tunable negative-tap photonic microwave filter using a cladding-mode coupler together with optical

Chan, Sze-Chun

309

Autopoiesis, the immune system, and adaptive information filtering  

Science Journals Connector (OSTI)

Adaptive information filtering is a challenging and fascinating problem. It requires the adaptation of a representation of a user's multiple interests to various changes in them. We tackle this dynamic problem with Nootropia, a model inspired by the ... Keywords: Adaptive information filtering, Autopoiesis, Immune-inspired

Nikolaos Nanas; Anne Roeck

2009-06-01T23:59:59.000Z

310

Compositional analysis of floating-point linear numerical filters  

E-Print Network [OSTI]

Compositional analysis of floating-point linear numerical filters David Monniaux CNRS / Laboratoire filters are used in a variety of applications (sound treatment, control/command, etc.), implemented experience with the Astr´ee static analyzer [3] is that precise analysis of the numerical behavior

Monniaux, David

311

Department of Mechanical Engineering Spring 2012 HVAC Filter Sensor -Global  

E-Print Network [OSTI]

PENNSTATE Department of Mechanical Engineering Spring 2012 HVAC Filter Sensor - Global Overview The purpose of this project is to develop a heating, ventilation, and air conditioning (HVAC) monitoring a residential, forced flow, multi-zone HVAC filter needs to be replaced, and then alerts the users

Demirel, Melik C.

312

Optical design of electron microscope lenses and energy filters  

Science Journals Connector (OSTI)

......Two-stage elearon energy analyzer Czech Republic...Academic Press New York) piece for a transmission...Academic Press, New York). 47 Tang T T...T.!.!.2 : Energy-filtering Transmission...Proposal of a new energy filter for TEM......

K Tsuno

1999-01-01T23:59:59.000Z

313

3D Wavelet-Based Filter and Method  

DOE Patents [OSTI]

A 3D wavelet-based filter for visualizing and locating structural features of a user-specified linear size in 2D or 3D image data. The only input parameter is a characteristic linear size of the feature of interest, and the filter output contains only those regions that are correlated with the characteristic size, thus denoising the image.

Moss, William C. (San Mateo, CA); Haase, Sebastian (San Francisco, CA); Sedat, John W. (San Francisco, CA)

2008-08-12T23:59:59.000Z

314

Spreadsheet Filtering by FFT Gaussian-based Convolution  

E-Print Network [OSTI]

Filtering of digital signals is accomplished on an Excel spreadsheet using fast Fourier transform (FFT) convolution in which the kernel is either a Gaussian or a cosine modulated Gaussian. Pedagogical examples of low-pass and band-pass filtering are provided, and the practical value of the spreadsheet is illustrated with some cases involving an earthquake record generated by a folded pendulum seismometer.

Randall D. Peters

2004-06-18T23:59:59.000Z

315

DEVELOPMENT OF A CANDLE FILTER FAILURE SAFEGUARD DEVICE  

SciTech Connect (OSTI)

The full-flow mechanical safeguard device (FFMSGD) has been developed under contract to the National Energy Technology Laboratory (NETL) to address problems with the reliability of ceramic candle filter elements installed on high-temperature, high-pressure (HTHP) Hot Gas Cleanup (HGCU) filters. Although systems candle filters are expected to perform satisfactorily when in good operating condition, the failure of even a single filter element can increase the filter system outlet dust loading enough to potentially damage gas turbine blades, contaminate other downstream processes, and limit the availability of the power system. Filter failure safeguard devices that are installed on each individual candle filter element are envisioned as a guarantee of a candle filter system's ability to withstand some number of element failures and continue operation without these negative consequences. The intention of the FFMSGD is to provide this guarantee without incurring any significant pressure drop penalty or constraining the filter system's reverse-pulse cleaning procedures. The FFMSGD provides a clear flow path for filtered and reverse-flow cleaning gases when its filter element is intact, and activates to provide a positive mechanical seal against gas flow in either direction when its filter element breaks or fails. This activation is induced by the increase in the flow rate of gas through the device in event of filter failure. The FFMSGD is designed to be easily removed and reconditioned when the filter system is taken off line for routine maintenance. This report is intended to be issued with a companion appendix. As instructed in Section J.12 of Contract No. DE-AC26-99FT40678, all the restricted, proprietary, and patentable information (not yet disclosed through the patent application process) related to the FFMSGD and its evaluation under this contract has been included only in the appendix. This Final Report, which is available to the public, contains background information and general descriptions of the operating principles of the FFMSGD. This report also describes the results of various evaluations of the device at room temperature and in HTHP environments. This Final Report also includes discussions of commercialization issues. For clarity and completeness, all of the information contained in this Final Report has also been included in the appendix.

Todd R. Snyder

2002-03-29T23:59:59.000Z

316

Contextus: A Modern Intervention in the Urban Fabric.  

E-Print Network [OSTI]

??Contextus: a Modern Intervention in the Urban Fabric, by Richard Gallagher ABSTRACT The word "context" originates in "contextus", which is Latin for "weaving." An architectural… (more)

Gallagher, Richard

2007-01-01T23:59:59.000Z

317

Graphene and its derivatives : fabrication and Raman spectroscopy study.  

E-Print Network [OSTI]

??This thesis presents results on fabrication and Raman spectroscopy studies of graphene and its derivates. The works can be divided into two parts as follows.… (more)

Cong, Chunxiao.

2012-01-01T23:59:59.000Z

318

Apparatus and Method for Fabricating Thin Film Devices using...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

method for manufacturing thin-films was developed specifically for fabrication of CdSCdTe photovoltaic modules. However, this innovation should perform excellently for any...

319

Update on US High Density Fuel Fabrication Development  

SciTech Connect (OSTI)

Second generation uranium molybdenum fuel has shown excellent in-reactor irradiation performance. This metallic fuel type is capable of being fabricated at much higher loadings than any presently used research reactor fuel. Due to the broad range of fuel types this alloy system encompasses—fuel powder to monolithic foil and binary fuel systems to multiple element additions—significant amounts of research and development have been conducted on the fabrication of these fuels. This paper presents an update of the US RERTR effort to develop fabrication techniques and the fabrication methods used for the RERTR-9A miniplate test.

C.R. Clark; G.A. Moore; J.F. Jue; B.H. Park; N.P. Hallinan; D.M. Wachs; D.E. Burkes

2007-03-01T23:59:59.000Z

320

Fabricate PHEV Cells for Testing & Diagnostics | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Documents & Publications Overview of Applied Battery Research Fabricate PHEV Cells for Testing & Diagnostics Vehicle Technologies Office: 2008 Energy Storage R&D Annual Progress...

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Fabrication of Emissible Metallic Layer-by-Layer Photonic Crystals...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Solar Thermal Solar Thermal Solar Photovoltaic Solar Photovoltaic Building Energy Efficiency Building Energy Efficiency Find More Like This Return to Search Fabrication of...

322

Reduction in Fabrication Costs of Gas Diffusion Layers | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Layers Reduction in Fabrication Costs of Gas Diffusion Layers 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation...

323

NETL: Gasification - Long-Term Candle Filter Tests  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Long-Term Candle Filter Tests Long-Term Candle Filter Tests National Carbon Capture Center at the Power Systems Development Facility Southern Company Services, Inc. Project Number: NT0000749 Project Description The National Carbon Capture Center advancement of hot gas filtration technology provides the design for optimal, long-term evaluation of material performance for particulate control device (PCD) filter elements. Testing is performed using the commercially available Siemens PCD, due to its demonstrated excellent collection efficiency during normal operation. The PCD, located downstream of the primary gas cooler, houses up to 91 candle-type filter elements. They're currently used in the development of candle filters that can efficiently remove particulates at varying temperatures, using low-cost materials and innovative design.

324

Secondary pollutants from ozone reactions with ventilation filters and  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Secondary pollutants from ozone reactions with ventilation filters and Secondary pollutants from ozone reactions with ventilation filters and degradation of filter media additives Title Secondary pollutants from ozone reactions with ventilation filters and degradation of filter media additives Publication Type Journal Article Year of Publication 2011 Authors Destaillats, Hugo, Wenhao Chen, Michael G. Apte, Nuan Li, Michael Spears, Jérémie Almosni, Gregory Brunner, Jianshun(Jensen) Zhang, and William J. Fisk Journal Atmospheric Environment Volume 45 Start Page 3561 Issue 21 Pagination 3561-3568 Keywords commercial building ventilation & indoor environmental quality group, commercial building ventilation and indoor environmental quality group, energy analysis and environmental impacts department, indoor environment department, indoor environment group

325

Polarization-independent optical wavelength filter for channel dropping applications  

DOE Patents [OSTI]

The polarization dependence of optical wavelength filters is eliminated by using waveguide directional couplers. Material birefringence is used to compensate for the waveguide (electromagnetic) birefringence which is the original cause of the polarization dependence. Material birefringence is introduced in a controllable fashion by replacing bulk waveguide layers by finely layered composites, such as multiple quantum wells using III-V semiconductor materials. The filter has use in wavelength-division-multiplexed fiber optic communication systems. This filter has broad application for wavelength-tunable receivers in fiber optic communication links, which may be used for telecommunications, optical computer interconnect links, or fiber optic sensor systems. Since multiple-wavelength systems are increasingly being used for all of these applications, the filter is useable whenever a rapidly tunable, wavelength-filtering receiver is required.

Deri, Robert J. (Pleasanton, CA); Patterson, Frank (Livermore, CA)

1996-01-01T23:59:59.000Z

326

Use of adaptive matching filters to improve reservoir definition  

SciTech Connect (OSTI)

Improvements in seismic resolution through better seismic acquisition and processing coupled with geometric improvements provided by 3-D surveys should allow better depiction of reservoir settings. To more fully benefit from these data improvements, is is desirable to translate the seismic acoustic attributes into a form that has more lithologic meaning. Tuning and thin bed effects etc. are automatically taken into account, and the acoustic data rendered into rock terms by matched filtering. The advantage of the present method is that the matching filter is allowed to adapt over time, but only slowly. The result is adaptive filters that give better prediction of lithologic characteristics in areas adjacent to the control data. Slowly adaptive matching filters can provide better prediction of reservoir characteristics between control points (wells). Such techniques are particularly suitable in multiwell settings where it is possible to frequently calibrate the filters.

DuBose, J.B. Jr; Blackwelder, B.

1995-12-31T23:59:59.000Z

327

METAL FILTERS FOR PRESSURIZED FLUID BED COMBUSTION (PFBC) APPLICATIONS  

SciTech Connect (OSTI)

Advanced coal and biomass-based gas turbine power generation technologies (IGCC, PFBC, PCFBC, and Hipps) are currently under development and demonstration. Efforts at the Siemens Westinghouse Power Corporation (SWPC) have been focused on the development and demonstration of hot gas filter systems as an enabling technology for power generation. As part of the demonstration effort, SWPC has been actively involved in the development of advanced filter materials and component configuration, has participated in numerous surveillance programs characterizing the material properties and microstructure of field-tested filter elements, and has undertaken extended, accelerated filter life testing programs. This report reviews SWPC's material and component assessment efforts, identifying the performance, stability, and life of porous commercial metal, advanced alloy, and intermetallic filters under simulated, pressurized fluidized-bed combustion (PFBC) conditions.

M.A. Alvin

2004-01-02T23:59:59.000Z

328

Method of fabricating a cooled electronic system  

DOE Patents [OSTI]

A method of fabricating a liquid-cooled electronic system is provided which includes an electronic assembly having an electronics card and a socket with a latch at one end. The latch facilitates securing of the card within the socket. The method includes providing a liquid-cooled cold rail at the one end of the socket, and a thermal spreader to couple the electronics card to the cold rail. The thermal spreader includes first and second thermal transfer plates coupled to first and second surfaces on opposite sides of the card, and thermally conductive extensions extending from end edges of the plates, which couple the respective transfer plates to the liquid-cooled cold rail. The extensions are disposed to the sides of the latch, and the card is securable within or removable from the socket using the latch without removing the cold rail or the thermal spreader.

Chainer, Timothy J; Gaynes, Michael A; Graybill, David P; Iyengar, Madhusudan K; Kamath, Vinod; Kochuparambil, Bejoy J; Schmidt, Roger R; Schultz, Mark D; Simco, Daniel P; Steinke, Mark E

2014-02-11T23:59:59.000Z

329

Turbine airfoil fabricated from tapered extrusions  

DOE Patents [OSTI]

An airfoil (30) and fabrication process for turbine blades with cooling channels (26). Tapered tubes (32A-32D) are bonded together in a parallel sequence, forming a leading edge (21), a trailing edge (22), and pressure and suction side walls (23, 24) connected by internal ribs (25). The tapered tubes may be extruded without camber to simplify the extrusion process, then bonded along matching surfaces (34), forming a non-cambered airfoil (28), which may be cambered in a hot forming process and cut (48) to length. The tubes may have tapered walls that are thinner at the blade tip (T1) than at the base (T2), reducing mass. A cap (50) may be attached to the blade tip. A mounting lug (58) may be forged (60) on the airfoil base and then machined, completing the blade for mounting in a turbine rotor disk.

Marra, John J

2013-07-16T23:59:59.000Z

330

Fabrication of catalyzed ion transport membrane systems  

DOE Patents [OSTI]

Process for fabricating a catalyzed ion transport membrane (ITM). In one embodiment, an uncatalyzed ITM is (a) contacted with a non-reducing gaseous stream while heating to a temperature and for a time period sufficient to provide an ITM possessing anion mobility; (b) contacted with a reducing gaseous stream for a time period sufficient to provide an ITM having anion mobility and essentially constant oxygen stoichiometry; (c) cooled while contacting the ITM with the reducing gaseous stream to provide an ITM having essentially constant oxygen stoichiometry and no anion mobility; and (d) treated by applying catalyst to at least one of (1) a porous mixed conducting multicomponent metallic oxide (MCMO) layer contiguous with a first side of a dense layer of MCMO and (2) a second side of the dense MCMO layer. In another embodiment, these steps are carried out in the alternative order of (a), (d), (b), and (c).

Carolan, Michael Francis; Kibby, Charles Leonard

2013-06-04T23:59:59.000Z

331

Fabrication of advanced design (grooved) cermet anodes  

SciTech Connect (OSTI)

Attempts were made to fabricate full-size anodes with advanced, or grooved, design using isostatic pressing, slip casting injection molding. Of the three approaches, isostatic pressing produced an anode with dimensions nearest to the target specifications, without serious macroscopic flaws. This approach is considered the most promising for making advanced anodes for aluminum smelting. However, significant work still remains to optimize the physical properties and microstructure of the anode, both of which were significantly different from that of previous anodes. Injection molding and slip casting yielded anode materials with serious deficiencies, including cracks and holes. Injection molding gave cermet material with the best intrinsic microstructure, i.e., the microstructure of the material between macroscopic flaws was very similar to that of anodes previously made at PNL. Reason for the similarity may have to do with amount of residual binder in the material prior to sintering.

Windisch, C.F. Jr. (Pacific Northwest Lab., Richland, WA (United States)); Huettig, F.R. (Ceramic Magnetics, Inc., Fairfield, NJ (United States))

1993-05-01T23:59:59.000Z

332

Method of fabricating a honeycomb structure  

DOE Patents [OSTI]

A method of fabricating a monolithic honeycomb structure product involves shaping a first mixture of raw materials and a binder into a green honeycomb, extruding a second mixture of raw materials and a binder into one or more green members that each define an opening extending longitudinally therethrough. The raw materials of the second mixture are compatible with the raw materials of the first mixture. The green honeycomb and member(s) are dried. The binders of the green honeycomb and member(s) are softened at the surfaces that are to be bonded. The green member(s) is inserted into the honeycomb and bonded to the honeycomb to form an assembly thereof, which is then dried and fired to form a unified monolithic honeycomb structure. The insertion is best carried out by mounting a member in the shape of a tube on a mandrel, and inserting the mandrel into the honeycomb opening to bond the tube to the honeycomb. 7 figs.

Holleran, L.M.; Lipp, G.D.

1999-08-03T23:59:59.000Z

333

Method of fabricating a honeycomb structure  

DOE Patents [OSTI]

A method of fabricating a monolithic honeycomb structure product involves shaping a first mixture of raw materials and a binder into a green honeycomb, extruding a second mixture of raw materials and a binder into one or more green members that each define an opening extending longitudinally therethrough. The raw materials of the second mixture are compatible with the raw materials of the first mixture. The green honeycomb and member(s) are dried. The binders of the green honeycomb and member(s) are softened at the surfaces that are to be bonded. The green member(s) is inserted into the honeycomb and bonded to the honeycomb to form an assembly thereof, which is then dried and fired to form a unified monolithic honeycomb structure. The insertion is best carried out by mounting a member in the shape of a tube on a mandrel, and inserting the mandrel into the honeycomb opening to bond the tube to the honeycomb.

Holleran, Louis M. (Big Flats, NY); Lipp, G. Daniel (Fort Collins, CO)

1999-01-01T23:59:59.000Z

334

Fabrication of Li-intercalated bilayer graphene  

Science Journals Connector (OSTI)

We have succeeded in fabricating Li-intercalated bilayer graphene on silicon carbide. The low-energy electron diffraction from Li-deposited bilayer graphene shows a sharp 3 × 3 R 30° pattern in contrast to Li-deposited monolayer graphene. This indicates that Li atoms are intercalated between two adjacent graphene layers and take the same well-ordered superstructure as in bulk C6Li. The angle-resolved photoemission spectroscopy has revealed that Li atoms are fully ionized and the ? bands of graphene are systematically folded by the superstructure of intercalated Li atoms producing a snowflake-like Fermi surface centered at the ? point. The present result suggests a high potential of Li-intercalated bilayer graphene for application to a nano-scale Li-ion battery.

K. Sugawara; K. Kanetani; T. Sato; T. Takahashi

2011-01-01T23:59:59.000Z

335

Fabrication of nanoscale charge density wave systems  

Science Journals Connector (OSTI)

Nanoscale charge density wave systems of quasi-one-dimensional o ? TaS 3 crystals were fabricated.Goldelectrodes 400 nm wide were made by standard lift-off technique on o ? TaS 3 nanocrystals prepared by deposition on silicon substrates. Interface resistance was higher than 100 G ? just after evaporation and were significantly reduced by electron-beam irradiation. The electrodes were tested down to 80 mK and were found quite durable for cryogenic measurement. The temperature dependence of the resistance of the nanocrystal was represented as the variable-range-hopping-type conduction with one dimension over the wide range of temperature from 4.2 to 100 K. This behavior was different from that of conventional bulk samples.

Katsuhiko Inagaki; Takeshi Toshima; Satoshi Tanda; Kazuhiko Yamaya; Shinya Uji

2005-01-01T23:59:59.000Z

336

Tenth target fabrication specialists` meeting: Proceedings  

SciTech Connect (OSTI)

This tenth meeting of specialists in target fabrication for inertial confinement is unique in that it is the first meeting that was completely unclassified. As a result of the new classification, we were able to invite more foreign participation. In addition to participants from the US, UK, and Canada, representatives from France, Japan, and two Russian laboratories attended, about 115 in all. This booklet presents full papers and poster sessions. Indirect and direct drive laser implosions are considered. Typical topics include: polymer or aluminium or resorcinol/formaldehyde shells, laser technology, photon tunneling microscopy as a characterization tool, foams, coatings, hohlraums, and beryllium capsules. Hydrogen, deuterium, tritium, and beryllium are all considered as fuels.

Foreman, L.R.; Stark, J.C. [comp.

1995-11-01T23:59:59.000Z

337

Methods for freeform fabrication of structures  

DOE Patents [OSTI]

Rapid prototyping methods and apparatuses that produce structures made of continuous-fiber polymer-matrix composites without the use of molds. Instead of using molds, the composite structure is fabricated patch by patch in layers or wraps, using a two- or three-axis stage connected to a rapidly-reconfigurable forming surface, and a robot arm to position the evolving composite structure, which are both programmable devices. Because programmable devices are included, i.e., a robot and a two- or three-axis stage connected to the reconfigurable forming surface, the control program needed to produce a desired shape can be easily modified to automatically generate the desired shape from an electronic model (e.g., using a CAD/CAM system) of the desired (predetermined) shape.

Kaufman, Stephen G. (Albuquerque, NM); Spletzer, Barry L. (Albuquerque, NM)

2000-01-01T23:59:59.000Z

338

Time-space fabric underlying anomalous diffusion  

E-Print Network [OSTI]

This study unveils the time-space transforms underlying anomalous diffusion process. Based on this finding, we present the two hypotheses concerning the effect of fractal time-space fabric on physical behaviors and accordingly derive fractional quantum relationships between energy and frequency, momentum and wavenumber which further give rise to fractional Schrodinger equation. As an alternative modeling approach to the standard fractional derivatives, we introduce the concept of the Hausdorff derivative underlying the Hausdorff dimensions of metric spacetime. And in terms of the proposed hypotheses, the Hausdorff derivative is used to derive a linear anomalous transport-diffusion equation underlying anomalous diffusion process. Its Green's function solution turns out to be a new type of stretched Gaussian distribution and is compared with that from the Richardson's diffusion equation.

W Chen

2005-05-08T23:59:59.000Z

339

Spacecraft fabrication and test MODIL. Final report  

SciTech Connect (OSTI)

This report covers the period from October 1992 through the close of the project. FY 92 closed out with the successful briefing to industry and with many potential and important initiatives in the spacecraft arena. Due to the funding uncertainties, we were directed to proceed as if our funding would be approximately the same as FY 92 ($2M), but not to make any major new commitments. However, the MODIL`s FY 93 funding was reduced to $810K and we were directed to concentrate on the cryocooler area. The cryocooler effort completed its demonstration project. The final meetings with the cryocooler fabricators were very encouraging as we witnessed the enthusiastic reception of technology to help them reduce fabrication uncertainties. Support of the USAF Phillips Laboratory cryocooler program was continued including kick-off meetings for the Prototype Spacecraft Cryocooler (PSC). Under Phillips Laboratory support, Gill Cruz visited British Aerospace and Lucas Aerospace in the United Kingdom to assess their manufacturing capabilities. In the Automated Spacecraft & Assembly Project (ASAP), contracts were pursued for the analysis by four Brilliant Eyes prime contractors to provide a proprietary snap shot of their current status of Integrated Product Development. In the materials and structure thrust the final analysis was completed of the samples made under the contract (``Partial Automation of Matched Metal Net Shape Molding of Continuous Fiber Composites``) to SPARTA. The Precision Technologies thrust funded the Jet Propulsion Laboratory to prepare a plan to develop a Computer Aided Alignment capability to significantly reduce the time for alignment and even possibly provide real time and remote alignment capability of systems in flight.

Saito, T.T.

1994-05-01T23:59:59.000Z

340

Closeout of JOYO-1 Specimen Fabrication Efforts  

SciTech Connect (OSTI)

Fabrication was well under way for the JOYO biaxial creep and tensile specimens when the NR Space program was canceled. Tubes of FS-85, ASTAR-811C, and T-111 for biaxial creep specimens had been drawn at True Tube (Paso Robles, CA), while tubes of Mo-47.5 Re were being drawn at Rhenium Alloys (Cleveland, OH). The Mo-47.5 Re tubes are now approximately 95% complete. Their fabrication and the quantities produced will be documented at a later date. End cap material for FS-85, ASTAR-811C, and T-111 had been swaged at Pittsburgh Materials Technology, Inc. (PMTI) (Large, PA) and machined at Vangura (Clairton, PA). Cutting of tubes, pickling, annealing, and laser engraving were in process at PMTI. Several biaxial creep specimen sets of FS-85, ASTAR-811C, and T-111 had already been sent to Pacific Northwest National Laboratory (PNNL) for weld development. In addition, tensile specimens of FS-85, ASTAR-811C, T-111, and Mo-47.5 Re had been machined at Kin-Tech (North Huntington, PA). Actual machining of the other specimen types had not been initiated. Flowcharts 1-3 detail the major processing steps each piece of material has experienced. A more detailed description of processing will be provided in a separate document [B-MT(SRME)-51]. Table 1 lists the in-process materials and finished specimens. Also included are current metallurgical condition of these materials and specimens. The available chemical analyses for these alloys at various points in the process are provided in Table 2.

ME Petrichek; JL Bump; RF Luther

2005-10-31T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Design and manufacture of a low-cost mechanism for compacting used oil filters  

E-Print Network [OSTI]

Used automotive oil filter disposal is a real and increasing problem in the United States. With over 450 million oil filters sold each year, and 80% of used filters thrown into landfills, this waste represents a significant ...

Kosoglow, Richard D

2008-01-01T23:59:59.000Z

342

New Techniques to Characterize and Remove Water-Based Drilling Fluids Filter Cake  

E-Print Network [OSTI]

Filter cake characterization is very important in drilling and completion operations. Heterogeneity of the filter cake plays a key role in the design of chemical treatments needed to remove the filter cake. The objectives of this study...

Elkatatny, Salaheldin Mahmoud

2013-03-29T23:59:59.000Z

343

Laboratory measurement of secondary pollutant yields from ozone reaction with HVAC filters.  

E-Print Network [OSTI]

Ozone Reaction with HVAC Filters Hugo Destaillats, WenhaoOzone Reaction with HVAC Filters Hugo Destaillats 1,3,* ,Ozone Reaction with HVAC Filters Hugo Destaillats 1,3,* ,

Destaillats, Hugo

2012-01-01T23:59:59.000Z

344

Energy Efficient Indoor VOC Air Cleaning with Activated Carbon Fiber (ACF) Filters  

E-Print Network [OSTI]

The existing particle filters in HVAC systems of buildingscandidates for use as VOC filters in HVAC systems. Recentcost of an ACF filter bed in an HVAC system is the energy

Sidheswaran, Meera

2012-01-01T23:59:59.000Z

345

Moving granular-bed filter development program. Topical report  

SciTech Connect (OSTI)

Advanced, coal-based, power plants, such as IGCC and Advanced-PFBC, are currently nearing commercial demonstration. These power plant technologies require hot gas filtration as part of their gas cleaning trains. Ceramic barrier filters are the major filter candidates being developed for these hot gas cleaning applications. While ceramic barrier filters achieve high levels of particle removal, concerns exist for their reliability and operability in these applications. An alternative hot gas filtration technology is the moving granular bed filter. An advanced, moving granular bed filter has been conceived, and early development activities performed by the Westinghouse Electric Corporation, Science and Technology Center. This document reports on the Base Contract tasks performed to resolve the barrier technical issues for this technology. The concept, the Standleg Moving Granular Bed Filter (SMGBF) has a concurrent downward, gas and bed media flow configuration that results in simplified features and improved scaleup feasibility compared to alternative designs. Two modes of bed media operation were assessed in the program: once-through using pelletized power plant waste as bed media, and recycle of bed media via standleg and pneumatic transport techniques. Cold Model testing; high-temperature, high-pressure testing; and pelletization testing using advanced power plant wastes, have been conducted in the program. A commercial, economic assessment of the SMGBF technology was performed for IGCC and Advanced-PFBC applications. The evaluation shows that the barrier technical issues can be resolved, and that the technology is potentially competitive with ceramic barrier filters.

Newby, R.A.; Yang, W.C.; Smeltzer, E.E.; Lippert, T.E.

1994-04-01T23:59:59.000Z

346

E-Print Network 3.0 - adaptive filtering techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

adaptive filtering techniques Page: << < 1 2 3 4 5 > >> 1 Applications of the Fourier Transform in Imaging Highpass and Lowpass Filters Summary: in the frequency domain. We present...

347

E-Print Network 3.0 - air filters Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: , water treatment equipment, elevators (electric and hydraulic), sewer lift pumps, filter servicing in air... lift pumps, filter servicing in air-handling units and...

348

High-frequency enhancement of magneto-optic data storage signals by optical and electronic filtering  

Science Journals Connector (OSTI)

We show that the system transfer function of magneto-optic data storage systems can be improved significantly by combination of optical filtering and electronic filtering. In our...

Walker, Edwin P; Milster, Tom D

1995-01-01T23:59:59.000Z

349

E-Print Network 3.0 - active filter utilizing Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TRANSACTIONS ON POWER ELECTRONICS, VOL. 17, NO. 1, JANUARY 2002 A New Hybrid Active Power Filter (APF) Topology Summary: active power filter topology. The function of the IGBT...

350

Oil Bypass Filter and Diesel Engine Idling Wear-Rate Evaluations...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Bypass Filter and Diesel Engine Idling Wear-Rate Evaluations Oil Bypass Filter and Diesel Engine Idling Wear-Rate Evaluations 2005 Diesel Engine Emissions Reduction (DEER)...

351

Capacitive micro-fabricated ultrasonic transducers for biometric applications  

Science Journals Connector (OSTI)

Two capacitive micro-fabricated ultrasonic transducers (cMUT) are evaluated for application in biometric recognition. Both transducers are 192 elements linear arrays, fabricated using the Reverse Process(TM) previously reported by some of the authors, ... Keywords: Acoustic imaging, Biometrics, CMUT

Antonio Iula; Alessandro Savoia; Giosuč Caliano

2011-08-01T23:59:59.000Z

352

Fabrication of cubic micron-scale 3D metamaterial resonators.  

SciTech Connect (OSTI)

We present a new fabrication technique called Membrane Projection Lithography for the production of three-dimensional metamaterials at infrared wavelengths. Using this technique, multilayer infrared metamaterials that include both in-plane and out-of-plane resonators can be fabricated.

Sinclair, Michael B.; Brener, Igal; Wendt, Joel Robert; Burckel, David Bruce; Ten Eyck, Gregory A.

2010-06-01T23:59:59.000Z

353

Midas: fabricating custom capacitive touch sensors to prototype interactive objects  

Science Journals Connector (OSTI)

An increasing number of consumer products include user interfaces that rely on touch input. While digital fabrication techniques such as 3D printing make it easier to prototype the shape of custom devices, adding interactivity to such prototypes remains ... Keywords: capacitive touch sensing, design tools, fabrication, prototyping

Valkyrie Savage; Xiaohan Zhang; Björn Hartmann

2012-10-01T23:59:59.000Z

354

Optically Fabricated Three Dimensional Nanofluidic Mixers for Microfluidic  

E-Print Network [OSTI]

Optically Fabricated Three Dimensional Nanofluidic Mixers for Microfluidic Devices Seokwoo Jeon in the channels of microfluidic systems. Near field scanning optical measurements reveal the optics associated with the fabrication process and the key features that enable its application to the area of microfluidics. Confocal

Rogers, John A.

355

Self-Assembled Computer Architecture: Design and Fabrication Theory  

E-Print Network [OSTI]

Self-Assembled Computer Architecture: Design and Fabrication Theory by Christopher L. Dwyer CHRISTOPHER L. DWYER: Self-Assembled Computer Architecture: Design and Fabrication Theory (under the direction using self-assembling electronic circuitry. A DNA-guided self-assembly method, inspired by discoveries

Whitton, Mary C.

356

Glass Concrete Thin Sheets Reinforced with Prestressed Aramid Fabrics  

E-Print Network [OSTI]

Glass Concrete Thin Sheets Reinforced with Prestressed Aramid Fabrics Gregor Vilkner Submitted Glass Concrete Thin Sheets Reinforced with Prestressed Aramid Fabrics Gregor Vilkner Thin sheet concrete crushed glass as aggregate, a multitude of different esthetic effects can be produced, which again open up

Meyer, Christian

357

Survival of bioaerosols in HVAC system photocatalytic filters  

Science Journals Connector (OSTI)

Abstract The survival of an experimental bioaerosol in photocatalytic and non-photocatalytic filters was investigated under UV-A or UV-C radiation exposure. To ensure the generation of reproducible bioaerosols in real operating conditions of Heating, Ventilation and Air Conditioning (HVAC) systems and their homogeneous coating on filters, a reactor with an optimal geometry was developed. The bacterial aerosol was generated from standardised bacterial suspensions and the Gram-negative bacterial model Escherichia coli was used as the experimental organism. The bioaerosol was characterised in terms of particle size distribution, reproducibility and stability over time. The coating of aerosolised cells on the filters was then studied. The total number of aerosolised E. coli cells was different from the amount of cultivable bacterial cells extracted from filters, probably resulting from the stress of the aerosolisation process. Damages to the outer membrane of E. coli cells were clearly observed through SEM and epifluorescent microscopy analysis. The influence of important physical parameters in the reactor-aerosolisation duration, frontal velocity and relative humidity- on the amount of aerosolised cells coated on filters were also investigated. Finally, the effects of UV-A or UV-C radiation were assessed on aerosolised microorganisms coated on HEPA photocatalytic filters and on photocatalytic or non-photocatalytic filters containing activated charcoal. The HEPA photocatalytic filters demonstrated a better disinfection efficiency with full damages of the aerosolised bacterial cells, probably resulting from an optimal contact between TiO2 coating and the microorganisms. In contrast, the use of filters with activated charcoal resulted in the apparition of an inactivation threshold that could be attributed to the penetration of aerosolised cells within the activated charcoal layer and the absence of contact with the photocatalyst. However, UV-C photocatalysis was able to inactivate faster and, at the same time, mineralise biological pollutants than UV-A.

S. Pigeot-Remy; J.C. Lazzaroni; F. Simonet; P. Petinga; C. Vallet; P. Petit; P.J. Vialle; C. Guillard

2014-01-01T23:59:59.000Z

358

Adjunctive Inferior Vena Cava Filter Placement for Acute Pulmonary Embolism  

SciTech Connect (OSTI)

Inferior vena cava (IVC) filters are sometimes placed as an adjunct to full anticoagulation in patients with significant pulmonary embolism (PE). We aimed to determine the prevalence of adjunctive IVC filter placement in individuals diagnosed with PE, as well as the effect of adjunctive filter placement on mortality in patients with right heart strain associated with PE. This was a retrospective study of patients with acute PE treated with full anticoagulation admitted to a single academic medical center. Information abstracted from patient charts included presence or absence of right heart strain and of deep-vein thrombosis, and whether or not an IVC filter was placed. The endpoint was in-hospital mortality. Over 2.75 years, we found that 248 patients were diagnosed with acute PE, with an in-hospital mortality rate of 4.4%. The prevalence of adjunctive IVC filter placement was 13.3% (33 of 248), and the prevalence of documented right heart strain was 27.0% (67 of 248). In-hospital mortality was 10.2% in the non-filter-treated group (5 of 49), whereas there were no deaths in the filter-treated group (0 of 18); however, the difference was not statistically significant (P = 0.37). Both the presence of deep-vein thrombosis and of right heart strain increased the likelihood that an adjunctive IVC filter was placed (P < 0.0001 and P < 0.001, respectively). At our institution, patients were treated with IVC filters in addition to anticoagulation in 13.3% of cases of acute PE. Prospective studies or large clinical registries should be conducted to clarify whether this practice improves outcomes.

Jha, V. M., E-mail: vjha@mfa.gwu.ed [George Washington University Medical Center, Division of Pulmonary and Critical Care Medicine, Department of Medicine (United States); Lee-Llacer, J. [George Washington University Medical Center, Department of Anesthesiology and Critical Care Medicine (United States); Williams, J.; Ubaissi, H.; Gutierrez, G. [George Washington University Medical Center, Division of Pulmonary and Critical Care Medicine, Department of Medicine (United States)

2010-08-15T23:59:59.000Z

359

Fabrication and Testing of Deflecting Cavities for APS  

SciTech Connect (OSTI)

Jefferson Lab (Newport News, Virginia) in collaboration with Argonne National Laboratory (Argonne, IL) has fabricated and tested four first article, 2.8 GHz, deflecting SRF cavities, for Argonne's Short-Pulse X-ray (SPX) project. These cavities are unique in many ways including the fabrication techniques in which the cavity cell and waveguides were fabricated. These cavity subcomponents were milled from bulk large grain niobium ingot material directly from 3D CAD files. No forming of sub components was used with the exception of the beam-pipes. The challenging cavity and helium vessel design and fabrication results from the stringent RF performance requirements required by the project and operation in the APS ring. Production challenges and fabrication techniques as well as testing results will be discussed in this paper.

Mammosser, John; Wang, Haipeng; Rimmer, Robert; Jim, Henry; Katherine, Wilson; Dhakal, Pashupati; Ali, Nassiri; Jim, Kerby; Jeremiah, Holzbauer; Genfa, Wu; Joel, Fuerst; Yawei, Yang; Zenghai, Li

2013-09-01T23:59:59.000Z

360

Mechanically and optically controlled graphene valley filter  

SciTech Connect (OSTI)

We theoretically investigate the valley-dependent electronic transport through a graphene monolayer modulated simultaneously by a uniform uniaxial strain and linearly polarized light. Within the Floquet formalism, we calculate the transmission probabilities and conductances of the two valleys. It is found that valley polarization can appear only if the two modulations coexist. Under a proper stretching of the sample, the ratio of the light intensity and the light frequency squared is important. If this quantity is small, the electron transport is mainly contributed by the valley-symmetric central band and the conductance is valley unpolarized; but when this quantity is large, the valley-asymmetric sidebands also take part in the transport and the valley polarization of the conductance appears. Furthermore, the degree of the polarization can be tuned by the strain strength, light intensity, and light frequency. It is proposed that the detection of the valley polarization can be realized utilizing the valley beam splitting. Thus, a graphene monolayer can be used as a mechanically and optically controlled valley filter.

Qi, Fenghua; Jin, Guojun, E-mail: gjin@nju.edu.cn [National Laboratory of Solid State Microstructures and Department of Physics, Nanjing University, Nanjing 210093 (China)

2014-05-07T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Electrically heated particulate filter with zoned exhaust flow control  

DOE Patents [OSTI]

A system includes a particulate matter (PM) filter that includes X zones. An electrical heater includes Y heater segments that are associated with respective ones of the X zones. The electrical heater is arranged upstream from and proximate with the PM filter. A valve assembly includes Z sections that are associated with respective ones of the X zones. A control module adjusts flow through each of the Z sections during regeneration of the PM filter via control of the valve assembly. X, Y and Z are integers.

Gonze, Eugene V [Pinckney, MI

2012-06-26T23:59:59.000Z

362

In Vivo Evaluation of a Retrievable Vena Cava Filter-The Dibie-Musset Filter: Experimental Results  

SciTech Connect (OSTI)

Purpose: To evaluate, in an animal model, the efficacy and safety of a 7 Fr percutaneous vena cava filter for temporary or permanent use. Methods: The Dibie-Musset (DM) filter is a wire preformed into a double-spiral shape with a spring effect. The experiment was performed in 15 adult sheep and consisted of the insertion of 45 filters, clot trapping tests, and filter retrieval. Follow-up in all sheep consisted of radiologic (abdominal radiograph, inferior vena cavogram, abdominal computed tomography), macroscopic, and microscopic examinations between days 8 and 386 after filter placement. Results: Of the 45 filters implanted in 15 sheep, 29 were retrieved between day 0 and day 15. Filtration efficiency was 100% for clots 4 x 4 x 20 mm. No long-term (1 year) side-effects were detectable. Microscopic examination of the vein wall showed only a dense intimal fibrosis without signs of acute inflammation at 1 year. Conclusion: These results support the efficiency and safety of the DM filter in an animal model.

Dibie, Alain [Departement Cardio-Vasculaire, Institut Mutualiste Montsouris, Choisy 6, Place de Port au Prince, F-75013 Paris (France); Musset, Dominique [Service de Cardiologie, Hopital Antoine Beclere, 158, rue de la Porte de Trivaux, F-92200 Clamart (France); Heissler, Marc [Departement Cardio-Vasculaire, Institut Mutualiste Montsouris, Choisy 6, Place de Port au Prince, F-75013 Paris (France); Fournet, Jean-Christophe [Service d'Anatomie et de Cytologie Pathologiques, Hopital Necker, 159 rue de Sevres, F-75015 Paris (France); Palau, Robert; Laborde, Francois [Departement Cardio-Vasculaire, Institut Mutualiste Montsouris, Choisy 6, Place de Port au Prince, F-75013 Paris (France)

1998-03-15T23:59:59.000Z

363

Fabrication and properties of syntactic magnesium foams  

SciTech Connect (OSTI)

Syntactic magnesium foams which consist of thin-walled hollow alumina spheres embedded in a magnesium matrix were fabricated by infiltrating a three-dimensional array of hollow spheres with a magnesium melt by using a gas pressure-assisted casting technique. The resulting composite contains closed cells of homogeneous and isotropic morphology. The densities of the syntactic magnesium foams were between 1.0 and 1.4 g/cm{sup 3}. The densities were controlled by variations in the bulk density of the hollow spheres with the volume fraction of spheres kept constant at approximately 63%. Compressive deformation characteristics of the composites were evaluated with respect to the influence of matrix strength and sphere wall thickness on characteristic variables such as compressive strength, plateau stress and energy absorption efficiency. Differences in the strength of the magnesium-based matrix materials investigated (cp-Mg, AM20, AM50, AZ91) had little influence on the compressive strength of the syntactic foam. However, an increasing relative wall thickness of the hollow ceramic spheres led to a significant strength enhancement. In all cases the ratio between compressive and plateau strength rose with increasing composite strength resulting in decreasing energy absorption efficiency.

Hartmann, M.; Reindel, K.; Singer, R.F. [Univ. of Erlangen (Germany). Dept. of Material Science

1998-12-31T23:59:59.000Z

364

Microhydropower Conveyance and Filter Basics | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Conveyance and Filter Basics Conveyance and Filter Basics Microhydropower Conveyance and Filter Basics August 16, 2013 - 3:53pm Addthis Before water enters the turbine or waterwheel of a microhydropower system, it is funneled through a series of components that control its flow and filter out debris. These components include the headrace, forebay, and water conveyance (or channel, pipeline, or penstock). The headrace is a waterway that runs parallel to the water source. A headrace is sometimes necessary for hydropower systems when insufficient head, or vertical drop, is provided and is usually constructed of cement or masonry. The headrace leads to the forebay, which also is made of concrete or masonry. It functions as a settling pond for large debris that would otherwise flow into the system and damage the turbine.

365

Bilayer-fish-scale ultrabroad terahertz bandpass filter  

Science Journals Connector (OSTI)

A bilayer fish-scale metamaterial is experimentally demonstrated to function as a broad bandpass filter in the terahertz regime. The measured 3 dB-bandwidth for normal incidence is...

Zhang, Xueqian; Gu, Jianqiang; Cao, Wei; Han, Jiaguang; Lakhtakia, Akhlesh; Zhang, Weili

2012-01-01T23:59:59.000Z

366

Spacetime Kalman filter Noel Cressie & Christopher K. Wikle  

E-Print Network [OSTI]

Space­time Kalman filter Noel Cressie & Christopher K. Wikle Volume 4, pp 2045­2049 in Encyclopedia], Meiring et al. [17], and Wikle and Cressie [22]. A General Space­Time Dynamical Model Before presenting

367

MATCHED FILTER COMPUTATION ON FPGA, CELL, AND GPU  

SciTech Connect (OSTI)

The matched filter is an important kernel in the processing of hyperspectral data. The filter enables researchers to sift useful data from instruments that span large frequency bands. In this work, they evaluate the performance of a matched filter algorithm implementation on accelerated co-processor (XD1000), the IBM Cell microprocessor, and the NVIDIA GeForce 6900 GTX GPU graphics card. They provide extensive discussion of the challenges and opportunities afforded by each platform. In particular, they explore the problems of partitioning the filter most efficiently between the host CPU and the co-processor. Using their results, they derive several performance metrics that provide the optimal solution for a variety of application situations.

BAKER, ZACHARY K. [Los Alamos National Laboratory; GOKHALE, MAYA B. [Los Alamos National Laboratory; TRIPP, JUSTIN L. [Los Alamos National Laboratory

2007-01-08T23:59:59.000Z

368

Evaluation of Alternative Filter Media for the Rotary Microfilter  

SciTech Connect (OSTI)

M. R. Poirier , D. T. Herman & R. Bhave (2012) Evaluation of Alternative Filter Media for the Rotary Microfilter, Separation Science and Technology, 47:14-15, 2108-2114

Poirier, M. [Savannah River National Laboratory, Environmental and Chemical Process Technology; Herman, [Savannah River National Laboratory, Environmental and Chemical Process Technology; Bhave, Ramesh R [ORNL

2012-01-01T23:59:59.000Z

369

Bloom Filter Based Intrusion Detection for Smart Grid  

E-Print Network [OSTI]

-gram analysis and Bloom Filter. The predictable and regular nature of the SCADA communication patterns is exploited to train the intrusion detection system. The protocol considered to test the proposed approach is MODBUS which is used for communication between a...

Parthasarathy, Saranya

2012-07-16T23:59:59.000Z

370

STABLE FILTERING SCHEMES WITH RATIONAL DILATIONS BRODY DYLAN JOHNSON  

E-Print Network [OSTI]

STABLE FILTERING SCHEMES WITH RATIONAL DILATIONS BRODY DYLAN JOHNSON Abstract. The relationship Services Administration at St. Louis University. 1 #12;2 BRODY DYLAN JOHNSON If is a scaling function

Johnson, Brody Dylan

371

Kalman Filter and Analog Schemes to Postprocess Numerical Weather Predictions  

Science Journals Connector (OSTI)

Two new postprocessing methods are proposed to reduce numerical weather prediction’s systematic and random errors. The first method consists of running a postprocessing algorithm inspired by the Kalman filter (KF) through an ordered set of analog ...

Luca Delle Monache; Thomas Nipen; Yubao Liu; Gregory Roux; Roland Stull

2011-11-01T23:59:59.000Z

372

An improved method for weighted least squares IIR filter design  

E-Print Network [OSTI]

Recently, a new method for IIR weighted least squares filter design has been proposed. In this method, the problem of approximating a desired frequency response using a rational function is solved using an iterative approach. After studying...

Davila-Pazmino, Javier

2012-06-07T23:59:59.000Z

373

Low Power Filtering Techniques for Wideband and Wireless Applications  

E-Print Network [OSTI]

This dissertation presents design and implementation of continuous time analog filters for two specific applications: wideband analog systems such as disk drive channel and low-power wireless applications. Specific focus has been techniques...

Gambhir, Manisha

2010-10-12T23:59:59.000Z

374

Nonlinear bayesian filtering with applications to estimation and navigation  

E-Print Network [OSTI]

In principle, general approaches to optimal nonlinear filtering can be described in a unified way from the recursive Bayesian approach. The central idea to this recur- sive Bayesian estimation is to determine the probability density function...

Lee, Deok-Jin

2005-08-29T23:59:59.000Z

375

Comparison of Ensemble Kalman Filters under Non-Gaussianity  

Science Journals Connector (OSTI)

Recently various versions of ensemble Kalman filters (EnKFs) have been proposed and studied. This work concerns, in a mathematically rigorous manner, the relative performance of two major versions of EnKF when the forecast ensemble is non-...

Jing Lei; Peter Bickel; Chris Snyder

2010-04-01T23:59:59.000Z

376

Grid Security Gateway on RADIUS and Packet Filter  

Science Journals Connector (OSTI)

RADIUS specified by RFC2865 and RFC2866 is used widely for remote dial-in user authentication and authorization. Packet filter such as Linux Netfilter is a primary toolkit to develop firewall or intrusion detecti...

Jing Cao; BingLiang Lou

2004-01-01T23:59:59.000Z

377

Radio Frequency Diesel Particulate Filter Sensor Reduces Fuel...  

Office of Environmental Management (EM)

this process, known as regeneration, to only occur when needed, thereby reducing fuel consumption and enabling longer filter life. The RF-DPF can be used with light- and...

378

California Energy Standards Recognize the Importance of Filter...  

Energy Savers [EERE]

filter sizing is an issue that applies to all new and existing homes that use ducted HVAC systems-about 68% of existing U.S. homes and most of the homes currently under...

379

HVAC efficiency: Can filter selection reduce HVAC energy costs?  

Science Journals Connector (OSTI)

In a society becoming more aware of the effects of energy consumption, Zoe Grainge takes a look at whether filter efficiency can go some way to ease the energy burden of HVAC systems.

Zoe Grainge

2007-01-01T23:59:59.000Z

380

High efficiency particulate removal with sintered metal filters  

SciTech Connect (OSTI)

Because of their particle removal efficiencies and durability, sintered metal filters have been chosen for high efficiency particulate air (HEPA) filter protection in the off-gas treatment system for the proposed Idaho National Engineering Laboratory Transuranic Waste Treatment Facility. Process evaluation of sintered metal filters indicated a lack of sufficient process design data to ensure trouble-free operation. Subsequence pilot scale testing was performed with flyash as the test particulate. The test results showed that the sintered metal filters can have an efficiency greater than 0.9999999 for the specific test conditions used. Stable pressure drop characteristics were observed in pulsed and reversed flow blowback modes of operation. Over 4900 hours of operation were obtained with operating conditions ranging up to approximately 90/sup 0/C and 24 vol % water vapor in the gas stream.

Kirstein, B.E.; Paplawsky, W.J.; Pence, D.T.; Hedahl, T.G.

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Lattice Boltzmann simulation on continuously regenerating diesel filter  

Science Journals Connector (OSTI)

...of the filter. We simulated a continuously regenerating DPF while simultaneously considering the deposition and combustion processes of soot particles. 2. Analytical model and X-ray computed tomography measurement In this section, the lattice...

2011-01-01T23:59:59.000Z

382

SCALE-CORRECTED ENSEMBLE KALMAN FILTER FOR OBSERVATIONS OF PRODUCTION  

E-Print Network [OSTI]

to introduce bias in production forecasts. The Scale-Corrected Ensemble Kalman Filter (SCEnKF) is a method is pressure at time t. Reservoir production properties at time t, such as gas-oil ratio (gor), bottom hole

Eidsvik, Jo

383

MUS420/EE367A Lecture 12 Wave Digital Filters  

E-Print Network [OSTI]

resistances, we obtain the following wave digital filter elements (the elementary one-ports): Inductor: v(t) i a port resistance (for reasons we'll discuss later). · In matrix notation, we readily see

Smith III, Julius Orion

384

Modern Processes of Producing Two-Layer Filtering Materials  

Science Journals Connector (OSTI)

The paper describes developments of the Powder Metallurgy Institute (National Academy of Sciences of Belarus) in the field of producing two-layer permeable structures with a filtering layer 0.3–0.4 mm in thick...

P. A. Vityaz; A. F. Ilyushchenko; V. M. Kaptsevich…

2014-01-01T23:59:59.000Z

385

GPS position determination using a nonlinear predictive filter  

E-Print Network [OSTI]

GPS POSITION DETERIvlINATION USING A NONLINEAR PREDICTIVE FILTER A Thesis by CURTIS BRANDON WEBB Submitted to the Office of Graduate Studies of Texas AEeM University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE August 2002 Major Subject: Aerospace Engineering GPS POSITION DETERlvIINATION USING A NONLINEAR PREDICTIVE FILTER A Thesis by CURTIS BRANDON WEBB Submitted to Texas Akh~f University in partial fulfillment of the requirements...

Webb, Curtis Brandon

2012-06-07T23:59:59.000Z

386

Amplifier insensitive integrator design for active RC filter synthesis  

E-Print Network [OSTI]

AM?LIFIER INSENSITIVE INTEGRATOR DESIGN FOR ACTIVE RC FILTER SYNTHESIS A Thesis by GLENN ROGER BAILEY Submitted to the Graduate College of Texas A&M University in partial fulfillment of the'requirement for the degree of MASTER OF SCIENCE... May 1980 Major Subject: Electrical Engineering AMPLIFIER INSENSITIVE INTEGRATOR DESIGN FOR ACTIVE RC FILTER SYNTHESIS A Thesis by GLENN ROGER BAILEY Approved as to style and content by: (Chairman of Comit ee) (Member) ( ember) (Member) (Hea...

Bailey, Glenn Roger

2012-06-07T23:59:59.000Z

387

Physics prospects of UV-filtered overlap quarks  

E-Print Network [OSTI]

Some key features of the overlap operator with a UV-filtered Wilson kernel are discussed. The first part concerns spectral properties of the underlying shifted hermitean Wilson operator and the relation to the observed speedup of the overlap construction. Next, the localization of the filtered overlap and its axial-vector renormalization constant are discussed. Finally, results of an exploratory scaling study for $m_{ud}, m_s$ and $f_\\pi, f_K$ are presented.

Stephan Durr; Christian Hoelbling; Urs Wenger

2005-11-22T23:59:59.000Z

388

Zone heated inlet ignited diesel particulate filter regeneration  

SciTech Connect (OSTI)

An exhaust system that processes exhaust generated by an engine is provided. The system includes: a particulate filter (PF) that is disposed downstream of the engine and that filters particulates from the exhaust; and a grid that includes electrically resistive material that is segmented by non-conductive material into a plurality of zones and wherein the grid is applied to an exterior upstream surface of the PF.

Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

2012-06-26T23:59:59.000Z

389

Performance characterization of a packed bed electro-filter  

E-Print Network [OSTI]

PERFORMANCE CHARACTERIZATION OF A PACKED BED ELECTRO-FILTER A Thesis by A JAY NARAYANAN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1990 Major Subject: Safety Engineering PERFORMANCE CHARACTERIZATION OF A PACKED BED ELECTRO-FILTER A Thesis by AJAY NARAYANAN Approved as to style and content by: John P. Wagn (Ch ' of the Com ittee) Aydin Akgerman (Member) Ri ard B...

Narayanan, Ajay

2012-06-07T23:59:59.000Z

390

Rayleigh wave filter for three-component seismic data  

E-Print Network [OSTI]

RAYLEIGH WAVE FILTER FOR THREE ? COMPONENT SEISMIC DATA A Thesis by SYED ALI ASIF ZAIDI Submitted to the Office of Graduate Studies of Texas A&M Lrniversity in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... August 1991 Major Subject: Geophysics RAYLEIGH WAVE FILTER FOR THREE ? COMPONENT SEISMIC DATA A Thesis SYED ALI ASIF ZAIDI Approved as to style and content by: Steven . Harder air of Committee) Joel S. Watkins (Member) Ronald M. Brimhall (1...

Zaidi, Syed Ali Asif

2012-06-07T23:59:59.000Z

391

Coefficient quantization effects in block state variable digital filters  

E-Print Network [OSTI]

COEFFICIENT QUANTIZATION EFFECTS IN BLOCK STATE VARIABLE DIGITAL FILTERS A Thesis by KAB JOO LEE Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE August 1991 Major Subject: Electrical Engineering COEFFICIENT QIJANTIZATIOU EFFECTS IN l3LOCI~ STATE VARIABLE DIGITAL FILTERS A Thesis hs IiAB JOO LEE Approved as to style and content by: WVilliam G. )3liss (Chair of Comnaittee) Norman C...

Lee, Kab Joo

2012-06-07T23:59:59.000Z

392

The design of laser trimmable temperature invariant active NMOS filters  

E-Print Network [OSTI]

THE DESIGN OF LASER TRIMMABLE TEMPERATURE INVARIANT ACTIVE NMOS FILTERS A Thesis MATHEW ANTON RYBICKI Submitted to the Graduate College of Teras A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1983 Major Subject: Electrical Engineering THE DESIGN OF LASER TRIMMABLE TEMPERA'IURE INVARIANT ACTIVE NMOS FILTERS A Thesis by MATHEW ANTON RYBICKI Approved as to style and content by: Randall L. Geiger (Chairman of Committee) Phil ip ED...

Rybicki, Mathew Anton

2012-06-07T23:59:59.000Z

393

Streamline Assisted Ensemble Kalman Filter - Formulation and Field Application  

E-Print Network [OSTI]

KF first proposed by Evensen (1994) and later by Houtekamer and Mitchell (1998). These include the Ensemble Square Root Filter (EnSRF) (Whitaker and Hamill 2002), the Ensemble Adjustment Filter (EAF) (Anderson 2001) and the Ensemble Transform Kalman... is also supported by the extremely wide range of log-permeabilities in Figure 1.4. A considerable number of model cells exhibit extremely high or low values of permeability. This observation is consistent with previous findings (Gu and Oliver 2006...

Devegowda, Deepak

2010-10-12T23:59:59.000Z

394

Optical Filter Design: Gain Analysis and Tolerance Analysis  

E-Print Network [OSTI]

OPTICAL FILTER DESIGN: GAIN ANALYSIS AND TOLERANCE ANALYSIS A Thesis by VIVEK VANDRASI Submitted to the O ce of Graduate Studies of Texas A&M University in partial ful llment of the requirements for the degree of MASTER OF SCIENCE August... 2010 Major Subject: Electrical Engineering OPTICAL FILTER DESIGN: GAIN ANALYSIS AND TOLERANCE ANALYSIS A Thesis by VIVEK VANDRASI Submitted to the O ce of Graduate Studies of Texas A&M University in partial ful llment of the requirements...

Vandrasi, Vivek

2011-10-21T23:59:59.000Z

395

Calibrations of filter radiometers for determination of atmospheric optical depth  

Science Journals Connector (OSTI)

Atmospheric optical depths are determined by relating ground-based measurements of direct solar radiation to the extraterrestrial value, I0, that a filter radiometer would read outside the atmosphere. Usually I0 is determined by the Langley extrapolation technique from a high-altitude site, where clear and highly stable atmospheric conditions may be found. Alternatively, I0 can be measured in situ from a stratospheric balloon experiment. We have employed both methods and found agreement to better than 1 %. Filter radiometers tend to change over time, especially when used operationally outdoors. Absolute calibrations in the laboratory are used to monitor the radiometric stability of filter radiometers at the Physikalisch-Meteorologisches Observatorium Davos (PMOD/WRC, Switzerland). A spectral calibration facility based on a calibrated trap detector from the Physikalisch-Technische Bundesanstalt (PTB, Germany) is used to relate the filter radiometer to an accurate and long-term traceable standard. An FEL-lamp-based standard, previously used for several years, was compared with the new trap standard via a filter radiometer at four wavelengths between 368 nm and 862 nm and revealed a systematic difference of the order of 5 %. The link between radiometric and I0 calibration is the value of the extraterrestrial solar spectrum at the filter radiometer wavelengths which can be determined from these two calibrations and compared with published values.

Ch Wehrli

2000-01-01T23:59:59.000Z

396

Letter to the Editor Does filter media type really affect BRS?  

E-Print Network [OSTI]

and dirt on filters are ozone removal rates. Zhao et al. (2007), studied ozone removal by HVAC filtersLetter to the Editor Does filter media type really affect BRS? Dear Editor, Buchanan et al., (2008: the correlation between high outdoor ozone with the simultaneous use of polyester- synthetic filters and higher

Siegel, Jeffrey

397

Particle loading rates for HVAC filters, heat exchangers, and ducts Nomenclature  

E-Print Network [OSTI]

Particle loading rates for HVAC filters, heat exchangers, and ducts Nomenclature Afl surface area of floor (m2 ) bf fraction of bypass flow around the filter (dimensionless) Cout outdoor concentration on the filter per volume of air (mg/lm m3 ) Mf,tot total mass deposited on the filter per month of operation (g

Siegel, Jeffrey

398

Evaluation of HVAC filters as a sampling mechanism for indoor microbial communities  

E-Print Network [OSTI]

Evaluation of HVAC filters as a sampling mechanism for indoor microbial communities Federico Noris Fungi Microbial community HVAC filter Settled dust Air a b s t r a c t HVAC filters are in place of bacterial and fungal concentrations and communities in HVAC filter dust and other sampling locations

Siegel, Jeffrey

399

Fabrication and testing of nano-optical structures for advanced photonics and quantum information processing applications  

E-Print Network [OSTI]

approach : : : : : : : : : : : : : : : : : : : : : : : : : : : 34 xi FIGURE Page 18 Key fabrication steps utilizing e-beam lithography with bi-layer PMMA approach : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 35 19 Key fabrication steps...

Khan, Mughees Mahmood

2009-05-15T23:59:59.000Z

400

Fuel injector Holes (Fabrication of Micro-Orifices for Fuel Injectors...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

injector Holes (Fabrication of Micro-Orifices for Fuel Injectors) Fuel injector Holes (Fabrication of Micro-Orifices for Fuel Injectors) 2009 DOE Hydrogen Program and Vehicle...

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Fabrication Of Multilayered Thin Films Via Spin-Assembly  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fabrication Of Multilayered Thin Films Via Spin-Assembly Fabrication Of Multilayered Thin Films Via Spin-Assembly Fabrication Of Multilayered Thin Films Via Spin-Assembly A process of forming multilayer thin film heterostructures. Available for thumbnail of Feynman Center (505) 665-9090 Email Fabrication Of Multilayered Thin Films Via Spin-Assembly A process of forming multilayer thin film heterostructures is disclosed and includes applying a solution including a first water-soluble polymer from the group of polyanionic species, polycationic species and uncharged polymer species onto a substrate to form a first coating layer on the substrate, drying the first coating layer on the substrate, applying a solution including a second water-soluble polymer from the group of polyanionic species, polycationic species and uncharged polymer species

402

fabrication-polybenzimidazole-sri | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fabrication and Scale-Up of Polybenzimidazole-Based Membrane System for Pre-Combustion Capture of Carbon Dioxide Project No.: FC26-07NT43090 SRI International is developing a...

403

Reusable plasmonic substrates fabricated by interference lithography: a platform for  

E-Print Network [OSTI]

Reusable plasmonic substrates fabricated by interference lithography: a platform for systematic between electromagnetic and chemical enhancement, the development of standardized and recyclable SERS open a powerful platform within an analytical tool and in particular for systematic SERS studies

Dalang, Robert C.

404

Template-based Ferromagnetic Nanowires and Nanotubes: Fabrication and Characterization  

E-Print Network [OSTI]

This dissertation describes experimental studies of the structures and properties, and their correlations in ferromagnetic nanowires and nanotubes fabricated using porous templates. Ferromagnetic Ni and Fe nanowires with diameters 30 ~ 250 nm were...

Wei, Zhiyuan

2013-05-01T23:59:59.000Z

405

Nanostructure fabrication by electron and ion beam patterning of nanoparticles  

E-Print Network [OSTI]

Two modes of energetic beam-mediated fabrication have been investigated, namely focused ion beam (FIB) direct-writing of nanoparticles, and a technique for electrostatically patterning ionized inorganic nanoparticles, ...

Kong, David Sun, 1979-

2004-01-01T23:59:59.000Z

406

Fabrication and Characterization of Organic/Inorganic Photovoltaic Devices  

E-Print Network [OSTI]

is described from its power conversion efficiency (PCE).PCE of a photovoltaic device is determined from the currentPower conversion efficiency (PCE) of all of the fabricated

Guvenc, Ali Bilge

2012-01-01T23:59:59.000Z

407

Designing liquid repellent surfaces for fabrics, feathers and fog  

E-Print Network [OSTI]

Omniphobicity refers to a property of surfaces which are not wetted by water, oils, alcohols and other low surface tension liquids. Robust omniphobic surfaces can be applied in many areas including fabrics with chemical / ...

Chhatre, Shreerang S. (Shreerang Sharad)

2013-01-01T23:59:59.000Z

408

Design and fabrication of pressure-compensating compliant tubes  

E-Print Network [OSTI]

Different fabrication methods are evaluated for producing pressure-compensating tubes for use in low-pressure drip irrigation systems. Such devices would allow drip irrigation systems to operate at driving pressures much ...

Martin, Ian (Ian P.)

2014-01-01T23:59:59.000Z

409

MODEL 9975 SHIPPING PACKAGE FABRICATION PROBLEMS AND SOLUTIONS  

SciTech Connect (OSTI)

The Model 9975 Shipping Package is the latest in a series (9965, 9968, etc.) of radioactive material shipping packages that have been the mainstay for shipping radioactive materials for several years. The double containment vessels are relatively simple designs using pipe and pipe cap in conjunction with the Chalfont closure to provide a leak-tight vessel. The fabrication appears simple in nature, but the history of fabrication tells us there are pitfalls in the different fabrication methods and sequences. This paper will review the problems that have arisen during fabrication and precautions that should be taken to meet specifications and tolerances. The problems and precautions can also be applied to the Models 9977 and 9978 Shipping Packages.

May, C; Allen Smith, A

2008-05-07T23:59:59.000Z

410

Fabrication of Annealed Proton-Exchanged Waveguides for Vertical Integration  

E-Print Network [OSTI]

There is a drive for improving the surface uniformity of optical waveguide devices in the photonics lab. This report focuses on the exploration of annealed proton exchange (APE) waveguide fabrication on lithium niobate crystal as a method...

Webb, Jacob Douglas

2011-08-08T23:59:59.000Z

411

Timber tower : a flexible fabrication method for reconfigurable housing  

E-Print Network [OSTI]

"Prefabricating Housing...again", this time it's going to be different. Fabrication machine functionality is bracketed by the physical configuration and componentry of the system. Traditionally, a machine designer engineers ...

Coleman, James (James Richard)

2014-01-01T23:59:59.000Z

412

Fabricate PHEV Cells for Testing & Diagnostics | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation es030jansen2011p.pdf More Documents & Publications Fabricate PHEV...

413

Fabrication of Micro-Orifices for Diesel Fuel Injectors  

Broader source: Energy.gov (indexed) [DOE]

G. Fenske, J. Wang, and E. El- Hannouny (ANL), R Schaefer and F. Hamady (NVFEL) US DOE - Vehicle Technologies Propulsion Materials Jerry Gibbs Fabrication of Micro-orifices for...

414

Feasibility of Starting a Waterjet Fabrication Plant in Amman, Jordan  

E-Print Network [OSTI]

Engineering Management Field Project Feasibility of Starting a Waterjet Fabrication Plant in Amman, Jordan By Khaled A. Ahmad Spring Semester, 2010 An EMGT Field Project report submitted to the Engineering Management... and library search support. 3 Preface It has been my desire for a long time to investigate what it takes to start a water jet fabrication plant in Amman, Jordan to precisely cut marble, granite, and ceramics. I worked in the manufacturing...

Ahmad, Khaled A.

2010-05-14T23:59:59.000Z

415

Method of fabricating vertically aligned group III-V nanowires  

DOE Patents [OSTI]

A top-down method of fabricating vertically aligned Group III-V micro- and nanowires uses a two-step etch process that adds a selective anisotropic wet etch after an initial plasma etch to remove the dry etch damage while enabling micro/nanowires with straight and smooth faceted sidewalls and controllable diameters independent of pitch. The method enables the fabrication of nanowire lasers, LEDs, and solar cells.

Wang, George T; Li, Qiming

2014-11-25T23:59:59.000Z

416

High-temperature fabricable nickel-iron aluminides  

DOE Patents [OSTI]

Nickel-iron aluminides are described that are based on Ni.sub.3 Al, and have significant iron content, to which additions of hafnium, boron, carbon and cerium are made resulting in Ni.sub.3 Al base alloys that can be fabricated at higher temperatures than similar alloys previously developed. Further addition of molybdenum improves oxidation and cracking resistance. These alloys possess the advantages of ductility, hot fabricability, strength, and oxidation resistance.

Liu, Chain T. (Oak Ridge, TN)

1988-02-02T23:59:59.000Z

417

Low Cost Fabrication of Oxide Dispersion Strengthened Materials  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Low Cost Fabrication of Oxide Dispersion Low Cost Fabrication of Oxide Dispersion Strengthened Materials Background To obtain significant increases in the efficiency of coal fired power plants, steam pressure and temperature must be increased beyond current technology to advanced ultra-supercritical (A-USC) conditions -temperatures and pressures up to 760 degrees Celsius (°C) and 35 megapascals (MPa). The upper bounds of operating pressure and temperature are limited by the properties of the current set

418

Validation of Broadly Filtered Diagonalization Method for Extracting Frequencies and Modes from High-Performance Computations  

SciTech Connect (OSTI)

Recent developments have shown that one can get around the difficulties of finding the eigenvalues and eigenmodes of the large systems studied with high performance computation by using broadly filtered diagonalization [G. R. Werner and J. R. Cary, J. Compo Phys. 227, 5200 (2008)]. This method can be used in conjunction with any time-domain computation, in particular those that scale very well up to 10000s of processors and beyond. Here we present results that show that this method accurately obtains both modes and frequencies of electromagnetic cavities, even when frequencies are nearly degenerate. The application was to a well-characterized Kaon separator cavity, the A15. The computations are shown to have a precision to a few parts in 10{sup 5}. Because the computed frequency differed from the measured frequency by more than this amount, a careful validation study to determine all sources of difference was undertaken. Ultimately, more precise measurements of the cavity showed that the computations were correct, with remaining differences accounted for by uncertainties in cavity dimensions and atmospheric and thermal conditions. Thus, not only was the method validated, but it was shown to have the ability to predict differences in cavity dimensions from fabrication specifications.

Austin, T.M.; Cary, J.R.; /Colorado U.; Werner, G.R.; /Colorado U.; Bellantoni, L.; /Fermilab

2009-06-01T23:59:59.000Z

419

Characterization of Filters Loaded With Reactor Strontium Carbonate - 13203  

SciTech Connect (OSTI)

A collection of three highly radioactive filters containing reactor strontium carbonate were being prepared for disposal. All three filters were approximately characterized at the time of manufacture by gravimetric methods. The first filter had been partially emptied, and the quantity of residual activity was uncertain. Dose rate to activity modeling using the Monte-Carlo N Particle (MCNP) code was selected to confirm the gravimetric characterization of the full filters, and to fully characterize the partially emptied filter. Although dose rate to activity modeling using MCNP is a common technique, it is not often used for Bremsstrahlung-dominant materials such as reactor strontium. As a result, different MCNP modeling options were compared to determine the optimum approach. This comparison indicated that the accuracy of the results were heavily dependent on the MCNP modeling details and the location of the dose rate measurement point. The optimum model utilized a photon spectrum generated by the Oak Ridge Isotope Generation and Depletion (ORIGEN) code and dose rates measured at 30 cm. Results from the optimum model agreed with the gravimetric estimates within 15%. It was demonstrated that dose rate to activity modeling can be successful for Bremsstrahlung-dominant radioactive materials. However, the degree of success is heavily dependent on the choice of modeling techniques. (authors)

Josephson, Walter S. [Worley Parsons Polestar, 601 Williams Boulevard, Suite 4A, Richland WA 99352 (United States)] [Worley Parsons Polestar, 601 Williams Boulevard, Suite 4A, Richland WA 99352 (United States); Steen, Franciska H. [Pacific Northwest National Laboratory, P.O. Box 999, Richland WA 99352 (United States)] [Pacific Northwest National Laboratory, P.O. Box 999, Richland WA 99352 (United States)

2013-07-01T23:59:59.000Z

420

GLASS FABRICATION AND PRODUCT CONSISTENCY TESTING OF LANTHANIDE BOROSILICATE GLASS FOR PLUTONIUM DISPOSITION  

SciTech Connect (OSTI)

The Department of Energy Office of Environmental Management (DOE/EM) plans to conduct the Plutonium Disposition Project at the Savannah River Site (SRS) in Aiken, SC, to disposition excess weapons-usable plutonium. A plutonium glass waste form is a leading candidate for immobilization of the plutonium for subsequent disposition in a geologic repository. The objectives of this present task were to fabricate plutonium-loaded lanthanide borosilicate (LaBS) Frit B glass and perform testing to provide near-term data that will increase confidence that LaBS glass product is suitable for disposal in the proposed Federal Repository. Specifically, testing was conducted in an effort to provide data to Yucca Mountain Project (YMP) personnel for use in performance assessment calculations. Plutonium containing LaBS glass with the Frit B composition with a 9.5 wt% PuO{sub 2} loading was prepared for testing. Glass was prepared to support glass durability testing via the ASTM Product Consistency Testing (PCT) at Savannah River National Laboratory (SRNL). The glass was characterized with X-ray diffraction (XRD) and scanning electron microscopy coupled with energy dispersive spectroscopy (SEM/EDS) prior to performance testing. This characterization revealed some crystalline PuO{sub 2} inclusions with disk-like morphology present in the as fabricated, quench-cooled glass. A series of PCTs was conducted at SRNL with varying exposed surface area and test durations. Filtered leachates from these tests were analyzed to determine the dissolved concentrations of key elements. The leachate solutions were also ultrafiltered to quantify colloid formation. Leached solids from select PCTs were examined in an attempt to evaluate the Pu and neutron absorber release behavior from the glass and to investigate formation of alteration phases on the glass surface. A series of PCTs was conducted at 90 C in ASTM Type 1 water to compare the Pu LaBS Frit B glass durability to current requirements for High Level Waste (HLW) glass in a geologic repository. The PCT (7-day static test with powdered glass) results on the Pu-containing LaBS Frit B glass at SA/V of {approx} 2000 m{sup -1} showed that the glass was very durable with an average normalized elemental release value for boron of 0.013 g/m{sup 2}. This boron release value is {approx} 640X lower than normalized boron release from current Environmental Assessment (EA) glass used for repository acceptance. The PCT-B (7, 14, 28 and 56-day, static test with powdered glass) normalized elemental releases were similar to the normalized elemental release values from PCT-A testing, indicating that the LaBS Frit B glass is very durable as measured by the PCT. Normalized plutonium releases were essentially the same within the analytical uncertainty of the ICP-MS methods used to quantify plutonium in the 0.45 {micro}m-filtered leachates and ultra-filtered leachates, indicating that colloidal plutonium species do not form under the PCT conditions used in this study.

Crawford, C; James Marra, J; Ned Bibler, N

2007-02-12T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Formaldehyde emissions from ventilation filters under different relative  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Formaldehyde emissions from ventilation filters under different relative Formaldehyde emissions from ventilation filters under different relative humidity conditions Title Formaldehyde emissions from ventilation filters under different relative humidity conditions Publication Type Journal Article Refereed Designation Refereed Year of Publication 2013 Authors Sidheswaran, Meera A., Wenhao Chen, Agatha Chang, Robert Miller, Sebastian Cohn, Douglas P. Sullivan, William J. Fisk, Kazukiyo Kumagai, and Hugo Destaillats Journal Environmental Science and Technology Date Published 04/18/2013 Abstract A method combining life cycle assessment (LCA) and real options analyses is developed to predict project environmental and financial performance over time, under market uncertainties and decision-making flexibility. The method is applied to examine alternative uses for oil sands coke, a carbonaceous byproduct of processing the unconventional petroleum found in northern Alberta, Canada. Under uncertainties in natural gas price and the imposition of a carbon price, our method identifies that selling the coke to China for electricity generation by integrated gasification combined cycle is

422

Specification for HEPA Filters Used By DOE Contractors  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-3020-2005 DOE-STD-3020-2005 December 2005 Supersedes DOE-STD-3020-97 January 1997 DOE TECHNICAL STANDARD Specification for HEPA Filters Used by DOE Contractors U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited FOREWARD This U.S. Department of Energy (DOE) standard supersedes DOE-STD-3020-97 and is approved for use by DOE and its contractors. This standard was developed primarily for application in DOE programs. It provides guidance to DOE contractors for procurement and required testing of High Efficiency Particulate Air (HEPA) filters used in DOE nuclear facilities. Required testing is performed by the filter manufacturer and

423

Specification for HEPA Filters Used By DOE Contractors  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-3020-2005 DOE-STD-3020-2005 December 2005 Supersedes DOE-STD-3020-97 January 1997 DOE TECHNICAL STANDARD Specification for HEPA Filters Used by DOE Contractors U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited FOREWARD This U.S. Department of Energy (DOE) standard supersedes DOE-STD-3020-97 and is approved for use by DOE and its contractors. This standard was developed primarily for application in DOE programs. It provides guidance to DOE contractors for procurement and required testing of High Efficiency Particulate Air (HEPA) filters used in DOE nuclear facilities. Required testing is performed by the filter manufacturer and

424

Estimate the Electromechanical States Using Particle Filtering and Smoothing  

SciTech Connect (OSTI)

Accurate knowledge of electromechanical states is critical for efficient and reliable control of a power system. This paper proposes a particle filtering approach to estimate the electromechanical states of power systems from Phasor Measurement Unit (PMU) data. Without having to go through laborious linearization procedure, the proposed particle filtering techniques can estimate states of a complex power system, which is often non-linear and has non-Gaussian noise. The proposed method is evaluated using a multi-machine system with both large and small disturbances. Sensitivity studies of the dynamic state estimation performance are also presented to show the robustness of the proposed method. The inherent decoupling properties of particle filtering make it highly scalable and the potential to reduce computational time through parallel implementation is very promising.

Meng, Da; Zhou, Ning; Lu, Shuai; Lin, Guang

2012-07-22T23:59:59.000Z

425

Pu Glass Fabrication and Product Consistency Testing  

SciTech Connect (OSTI)

The DOE/EM plans to conduct the Plutonium Vitrification Project at the Savannah River Site (SRS). An important part of this project is to reduce the attractiveness of the plutonium by fabricating a plutonium glass form and immobilizing the Pu form within the high level waste (HLW) glass prepared in the Defense Waste Processing Facility (DWPF). This requires that a project schedule that is consistent with EM plans for DWPF and cleanup of the SRS be developed. Critical inputs to key decisions in the vitrification project schedule are near-term data that will increase confidence that lanthanide borosilicate (LaBS) glass product is suitable for disposal in the Yucca Mountain Repository. A workshop was held on April 28, 2005 at Bechtel SAIC Company facility in Las Vegas, NV to define the near term data needs. Dissolution rate data and the fate of plutonium oxide and the neutron absorbers during the dissolution process were defined as key data needs. A suite of short-term tests were defined at the workshop to obtain the needed data. The objectives of these short-term tests are to obtain data that can be used to show that the dissolution rate of a LaBS glass is acceptable and to show that the extent of Pu separation from neutron absorbers, as the glass degrades and dissolves, is not likely to lead to criticality concerns. An additional data need was identified regarding the degree of macroscopic cracking that occurs during processing of the Pu glass waste form and subsequent pouring of HLW glass in the DWPF. A final need to evaluate new frit formulations that may increase the durability of the plutonium glass and/or decrease the degree to which neutron absorbers separate from the plutonium during dissolution was identified. This task plan covers testing to support a near term data need regarding glass dissolution performance. Separate task plans will be developed for testing to address the degree of macroscopic cracking and the development of alternative frit formulations. The Product Consistency Test (PCT) was identified as a means to provide some of the near term performance data. The PCT is a static test method in which known masses of crushed glass and demineralized water are reacted for a desired duration [1]. There are two reasons to perform the PCT. The first is that the results are used as a measure of acceptance in the Waste Acceptance Product Specifications Document (WAPS) [2]. The second is the need for long-term static test results that can be used to verify the applicability of the degradation model. Thus, the primary focus will be on the use of the PCT Method B (PCT-B) to study the formation and stability of colloids and to study alteration phases formed on the glass surface. The standard 7-day PCT in demineralized water (PCT-A) will be included to demonstrate compliance with the waste acceptance criterion and determine the value of the k{sub E} rate parameter for comparison with the Defense HLW Glass Degradation Model [3].

Marra, James

2005-06-29T23:59:59.000Z

426

Potential-controlled filtering in quantum star graphs  

SciTech Connect (OSTI)

We study the scattering in a quantum star graph with a Fueloep-Tsutsui coupling in its vertex and with external potentials on the lines. We find certain special couplings for which the probability of the transmission between two given lines of the graph is strongly influenced by the potential applied on another line. On the basis of this phenomenon we design a tunable quantum band-pass spectral filter. The transmission from the input to the output line is governed by a potential added on the controlling line. The strength of the potential directly determines the passband position, which allows to control the filter in a macroscopic manner. Generalization of this concept to quantum devices with multiple controlling lines proves possible. It enables the construction of spectral filters with more controllable parameters or with more operation modes. In particular, we design a band-pass filter with independently adjustable multiple passbands. We also address the problem of the physical realization of Fueloep-Tsutsui couplings and demonstrate that the couplings needed for the construction of the proposed quantum devices can be approximated by simple graphs carrying only {delta} potentials. - Highlights: Black-Right-Pointing-Pointer Spectral filtering devices based on quantum graphs are designed theoretically. Black-Right-Pointing-Pointer The passband is controlled by the application of macroscopic potentials on lines. Black-Right-Pointing-Pointer The filters are built upon special Fulop-Tsutsui type couplings at graph vertices. Black-Right-Pointing-Pointer A method of construction of Fulop-Tsutsui vertices from delta potentials is devised.

Turek, Ondrej, E-mail: ondrej.turek@kochi-tech.ac.jp; Cheon, Taksu, E-mail: taksu.cheon@kochi-tech.ac.jp

2013-03-15T23:59:59.000Z

427

Fuel Injection Strategy for Soot-Filter Regeneration  

Broader source: Energy.gov [DOE]

Fuel injection is optimized to allow both fast soot removal and temperatures below 700-800oC in case of drop-to-idle event. A 1-D mathematical model was used to simulate soot loading and temperature variations as a function of time and axial position in the filter during active regenerations and drop-to-idle events. The fact that the maximum temperature reached in a soot filter is a function of the soot loading when the drop-to-idle event occurs has been taken into account for developing this fuel injection strategy.

428

The design and characterization of switched-resistor filters  

E-Print Network [OSTI]

THE DESIGN AND CHARACTERIZATION OF SWITCHED-RESISTOR FILTERS A Thesis by JAMES TRAUGOTT BASS Submitted to t'ne Graduate College of Texas ARM University in partial fulf'llment of the requirement. for the degree of MASTER OF SCIENCE August... 1983 Major Subjec : Electrical Engineering THE DESIGN AND CHARACTERIZATION OF SWITCHED-RESISTOR FILTERS A THESIS BY JAMES TRAUGOTT BASS Approved as to style and content by: an a I . caper (Chairman of Committee) Nor. an C. GriswoI, d (Member...

Bass, James Traugott

2012-06-07T23:59:59.000Z

429

Decomposition of formaldehyde by EPD photocatalyst filters in HVAC  

Science Journals Connector (OSTI)

This study used electrophoretic deposition (EPD) to apply titanium oxide (TiO2) coating on stainless steel filters and investigated the effectiveness of photocatalytic oxidation of formaldehyde by TiO2 under various conditions of heating ventilation air conditioning (HVAC). The results showed photocatalytic efficiency could reach 35.59% at 21 °C and 36.39% at 26 °C with 7 photocatalyst filters and 5 UVC lamps, the overall efficiency of formaldehyde removal of 52.37% at 21 °C, and 56.8% at 26 °C. By all experimental data can be found that the temperature for the photocatalytic performance is not obvious in the range of this study.

Chien-Chih Chen; Ching-Song Jwo; Tun-Ping Teng

2011-01-01T23:59:59.000Z

430

PWM drive filter inductor influence on transient immunity  

SciTech Connect (OSTI)

Surges of less than 200% magnitude caused by utility capacitor switching can disrupt PWM drives. In this paper, the disruption mechanism is investigated by SPICE simulation of the drive and the results are compared to field tests. An over current surge in the rectifier/filter section and dc over voltage are the most common disruption mechanisms. The drive dc filter inductor is the most important factor in capacitor transient sensitivity of the drive. A drive without the inductor or one in which the inductor is saturated by the transient is vulnerable to disruption.

Wagner, V.E. [Detroit Edison, MI (United States); Strangas, E. [Michigan State Univ., East Lansing, MI (United States). Dept. of Electrical Engineering

1995-12-31T23:59:59.000Z

431

Design of an input filter for power factor correction (PFC) AC to DC converters employing an active ripple cancellation  

SciTech Connect (OSTI)

An active input filter for power factor correction (PFC) circuit employing ripple current cancellation is proposed to reduce the filter`s size and cost.Switching ripple current can be filtered by an active circuit from the line current. A single stage passive filter with the active filter compensation circuit, a high filter can be synthesized to meet the electromagnetic interference (EMI) and power factor requirements. Analysis of the active filter and design procedure are detailed. Simulation result is presented to verify the high order filter characteristics of proposed scheme.

Lee, D.Y.; Cho, B.H. [Seoul National Univ. (Korea, Republic of). Electrical Engineering Dept.

1996-12-31T23:59:59.000Z

432

Advanced Safeguards Approaches for New TRU Fuel Fabrication Facilities  

SciTech Connect (OSTI)

This second report in a series of three reviews possible safeguards approaches for the new transuranic (TRU) fuel fabrication processes to be deployed at AFCF – specifically, the ceramic TRU (MOX) fuel fabrication line and the metallic (pyroprocessing) line. The most common TRU fuel has been fuel composed of mixed plutonium and uranium dioxide, referred to as “MOX”. However, under the Advanced Fuel Cycle projects custom-made fuels with higher contents of neptunium, americium, and curium may also be produced to evaluate if these “minor actinides” can be effectively burned and transmuted through irradiation in the ABR. A third and final report in this series will evaluate and review the advanced safeguards approach options for the ABR. In reviewing and developing the advanced safeguards approach for the new TRU fuel fabrication processes envisioned for AFCF, the existing international (IAEA) safeguards approach at the Plutonium Fuel Production Facility (PFPF) and the conceptual approach planned for the new J-MOX facility in Japan have been considered as a starting point of reference. The pyro-metallurgical reprocessing and fuel fabrication process at EBR-II near Idaho Falls also provided insight for safeguarding the additional metallic pyroprocessing fuel fabrication line planned for AFCF.

Durst, Philip C.; Ehinger, Michael H.; Boyer, Brian; Therios, Ike; Bean, Robert; Dougan, A.; Tolk, K.

2007-12-15T23:59:59.000Z

433

Fabrication of control rods for the High Flux Isotope Reactor  

SciTech Connect (OSTI)

The High Flux Isotope Reactor (HFIR) is a research-type nuclear reactor that was designed and built in the early 1960s and has been in continuous operation since its initial criticality in 1965. Under current plans, the HFIR is expected to continue in operation until 2035. This report updates ORNL/TM-9365, Fabrication Procedure for HFIR Control Plates, which was mainly prepared in the early 1970's but was not issued until 1984, and reflects process changes, lessons learned in the latest control rod fabrication campaign, and suggested process improvements to be considered in future campaigns. Most of the personnel involved with the initial development of the processes and in part campaigns have retired or will retire soon. Because their unlikely availability in future campaigns, emphasis has been placed on providing some explanation of why the processes were selected and some discussions about the importance of controlling critical process parameters. Contained in this report is a description of the function of control rods in the reactor, the brief history of the development of control rod fabrication processes, and a description of procedures used in the fabrication of control rods. A listing of the controlled documents and procedures used in the last fabrication campaigns is referenced in Appendix A.

Sease, J.D.

1998-03-01T23:59:59.000Z

434

Fabrication Flaw Density and Distribution in Piping Weldments  

SciTech Connect (OSTI)

The U.S. Nuclear Regulatory Commission supported the Pacific Northwest National Laboratory (PNNL) to develop empirical data on the density and distribution of fabrication flaws in nuclear reactor components. These data are needed to support probabilistic fracture mechanics calculations and studies on component structural integrity. PNNL performed nondestructive examination inspections and destructive testing on archived piping welds to determine the fabrication flaw size and distribution characteristics of the flaws in nuclear power plant piping weldments. Eight different processes and product forms in piping weldments were studied including wrought stainless steel and dissimilar metal weldments. Parametric analysis using an exponential fit was performed on the data. Results were created as a function of the through-wall size of the fabrication flaws as well as the length distribution. The results are compared and contrasted with those developed for reactor pressure vessel processes and product forms. The most significant findings were that the density of fabrication flaws versus through-wall size was higher in piping weldments than that for the reactor pressure vessel weldments, and the density of fabrication flaws versus through-wall size in both reactor pressure vessel weld repairs and piping weldments were greater than the density in the original weldments. Curves showing these distributions are presented.

Doctor, Steven R.

2009-09-01T23:59:59.000Z

435

Evaluation of Oil Bypass Filter Technology on Heavy-Duty Vehicles  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

(Advanced Vehicle Testing Activity) (Advanced Vehicle Testing Activity) Evaluation of Oil Bypass Filter Technology on Heavy-Duty Vehicles James Francfort American Filtration and Separations Society April 2005 Presentation Outline * Background & Objectives * Oil bypass filters - features & reported benefits * INL testing method * puraDYN oil bypass filters * Refined Global Solutions (RGS) oil bypass filters * Testing results & trends * Particulate and ferrography testing * Initial INL Oil Bypass Filter Economics * Potential fleet oil savings * Testing Status Bypass Filter Evaluation - Background * Funded by the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program (Advanced Vehicle Testing Activity) * Vehicles operated by Idaho National Laboratory's Fleet Operations group * Idaho National Laboratory

436

Enhancement of multi-media filter performance using talc as a new filter aid material: Mechanistic study  

Science Journals Connector (OSTI)

Abstract The potential of using a new filter aid, namely, talc to enhance the removal of particles in a multi-media filter was investigated. In the case of the nano-scale particles the running time was enhanced by 300 min at a talc concentration of 67.5 mg/l. In the case of the micro-scale particles the running time was enhanced from 20 min to 40, 100, and 300 min at a talc concentration of 22.5 mg/l, 45 mg/l, and 67.5 mg/l, respectively. Coagulation was due to hydrophobic and chemical interactions between talc and the different suspensions.

Hesan Elfaki; Alaa Hawari; Catherine Mulligan

2014-01-01T23:59:59.000Z

437

FUEL & TARGET FABRICATION Aiken County, South Carolina  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

& TARGET FABRICATION & TARGET FABRICATION Aiken County, South Carolina 300/M AREA 300/M AREA SAVANNAH RIVER SITE COLD WAR HISTORIC PROPERTY DOCUMENTATION ii ABSTRACT This documentation was prepared in accordance with a Memorandum of Agreement (MOA) signed by the Department of Energy-Savannah River (DOE-SR) and the South Carolina Historic Preservation Office (SHPO) dated February 27, 2003, as well as the Consolidated MOA of August 2004. The MOA stipulated that a thematic study and photographic documentation be produced that told the story of 300/M Area's genesis, its operational history, and its closure. New South Associates prepared the narrative and Westinghouse Savannah River Company (WSRC) completed the photographic documentation. M Area is the site of Savannah River Plant's fuel and target fabrication facilities operated from 1955

438

Fabrication and Characterization of Uranium-based High Temperature Reactor  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fabrication and Characterization of Uranium-based High Temperature Reactor Fabrication and Characterization of Uranium-based High Temperature Reactor Fuel June 01, 2013 The Uranium Fuel Development Laboratory is a modern R&D scale lab for the fabrication and characterization of uranium-based high temperature reactor fuel. A laboratory-scale coater manufactures tri-isotropic (TRISO) coated fuel particles (CFPs), state-of-the-art materials property characterization is performed, and the CFPs are then pressed into fuel compacts for irradiation testing, all under a NQA-1 compliant Quality Assurance Program. After fuel kernel size and shape are measured by optical shadow imaging, the TRISO coatings are deposited via fluidized bed chemical vapor deposition in a 50-mm diameter conical chamber within the coating furnace. Computer control of temperature and gas composition ensures reproducibility

439

Washing off intensification of cotton and wool fabrics by ultrasounds  

Science Journals Connector (OSTI)

Abstract Wet textile washing processes were set up for wool and cotton fabrics to evaluate the potential of ultrasound transducers (US) in improving dirt removal. The samples were contaminated with an emulsion of carbon soot in vegetable oil and aged for three hours in fan oven. Before washing, the fabrics were soaked for 3 min in a standard detergent solution and subsequently washed in a water bath. The dirt removal was evaluated through colorimetric measurements. The total color differences ?E of the samples were measured with respect to an uncontaminated fabric, before and after each washing cycle. The percentage of ?E variation obtained was calculated and correlated to the dirt removal. The results showed that the US transducers enhanced the dirt removal and temperature was the parameter most influencing the US efficiency on the cleaning process. Better results were obtained at a lower process temperature.

R. Peila; G. Actis Grande; M. Giansetti; S. Rehman; S. Sicardi; G. Rovero

2014-01-01T23:59:59.000Z

440

Freeform fabrication of polymer-matrix composite structures  

SciTech Connect (OSTI)

The authors have developed, prototyped, and demonstrated the feasibility of a novel robotic technique for rapid fabrication of composite structures. Its chief innovation is that, unlike all other available fabrication methods, it does not require a mold. Instead, the structure is built patch by patch, using a rapidly reconfigurable forming surface, and a robot to position the evolving part. Both of these components are programmable, so only the control software needs to be changed to produce a new shape. Hence it should be possible to automatically program the system to produce a shape directly from an electronic model of it. It is therefore likely that the method will enable faster and less expensive fabrication of composites.

Kaufman, S.G.; Spletzer, B.L.; Guess, T.L.

1997-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Fabrication of High-Speed Resonant Cavity Enhanced Schottky Photodiodes  

E-Print Network [OSTI]

Abstract — We report the fabrication and testing of a GaAsbased high-speed resonant cavity enhanced (RCE) Schottky photodiode. The top-illuminated RCE detector is constructed by integrating a Schottky contact, a thin absorption region (InHXHVGaHXWPAs) and a distributed AlAs–GaAs Bragg mirror. The Schottky contact metal serves as a high-reflectivity top mirror in the RCE detector structure. The devices were fabricated by using a microwave-compatible fabrication process. The resulting spectral photo response had a resonance around 895 nm, in good agreement with our simulations. The full-widthat-half-maximum (FWHM) was 15 nm, and the enhancement factor was in excess of 6. The photodiode had an experimental setup limited temporal response of 18 ps FWHM, corresponding to a 3-dB bandwidth of 20 GHz. Index Terms—High-speed circuits/devices, photodetectors, photodiodes, resonant caity enhancement, Schottky diodes.

Ekmel Özbay; M. Saiful Islam; Bora Onat; Student Member; Mutlu Gökkavas; Orhan Aytür; Gary Tuttle; Elias Towe; R. H. Henderson; M. Selim Ünlü; Senior Member

442

Logomatic Gmbh Grinding Machines Fabrication | Open Energy Information  

Open Energy Info (EERE)

Logomatic Gmbh Grinding Machines Fabrication Logomatic Gmbh Grinding Machines Fabrication Jump to: navigation, search Name Logomatic Gmbh Grinding Machines Fabrication Place Mainaschaff, Germany Zip D-63814 Sector Solar Product German manufacturer of capital equipment for semiconductor and solar industries; for solar, offers diamond cropping and squaring machines. Coordinates 49.97746°, 9.085379° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":49.97746,"lon":9.085379,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

443

Nonlinear programming without a penalty function or a filter  

E-Print Network [OSTI]

, Oxford OX1 3QD, England. Email: nick.gould@comlab.ox.ac.uk 2 Department of Mathematics, FUNDP is far from optimal. The final central feature is that the algorithm does not use any merit function of the 1 #12;Gould, Toint: Nonlinear programming without a penalty function or a filter 2 merit function

Toint, Philippe

444

ReferralWeb: Combining Social Networks and Collaborative Filtering  

E-Print Network [OSTI]

ReferralWeb: Combining Social Networks and Collaborative Filtering Henry Kautz, Bart Selman­2815 fkautz, selmang@research.att.com shah@mit.edu 1. The Power of Referral Chaining This paper appears of personal referrals from the searcher to the expert. The referral chain serves two key functions

Kautz, Henry

445

Multi-robot Simultaneous Localization and Mapping using Particle Filters  

E-Print Network [OSTI]

Multi-robot Simultaneous Localization and Mapping using Particle Filters Andrew Howard NASA Jet Propulsion Laboratory Pasadena, California 91109, U.S.A. Email: abhoward@robotics.jpl.nasa.gov Abstract-- This paper describes an on-line algorithm for multi- robot simultaneous localization and mapping (SLAM). We

Del Moral , Pierre

446

An information theoretic approach of designing sparse kernel adaptive filters  

E-Print Network [OSTI]

complexities grow linearly with the number of training data, which poses a big problem for continuous of designing sparse kernel adaptive filters. To determine useful data to be learned and remove redundant ones efficiency by reducing the effective number of training data. The complexity of these algorithms ranges from

Slatton, Clint

447

MODELING MULTI-OUTPUT FILTERING EFFECTS IN PCMOS Anshul Singh*  

E-Print Network [OSTI]

MODELING MULTI-OUTPUT FILTERING EFFECTS IN PCMOS Anshul Singh* , Arindam Basu , Keck-Voon Ling* and Vincent J. Mooney III*$§ Email: anshul.singh@research.iiit.ac.in, {arindam.basu, ekvling}@ntu, Nanyang Technological University (NTU), Singapore * NTU-Rice Institute of Sustainable and Applied

Mooney, Vincent

448

Design of a Extended Kalman Filter for UAV Localization  

E-Print Network [OSTI]

Design of a Extended Kalman Filter for UAV Localization Guoqiang Mao§, Sam Drake and Brian D. O Limited, Canberra, Australia Abstract Unmanned aerial vehicles (UAVs) are increasingly used in military and scientific research. Some miniaturized UAVs rely entirely on the global positioning system (GPS

Mao, Guoqiang

449

Grouping annotating and filtering history information in VKB  

E-Print Network [OSTI]

to individual events or group of events in the list. Moreover, I explore the value of history event filtering, limiting the edits and groups presented to those that match user descriptions. My contribution in this thesis is the addition of mechanisms whereby...

Akkapeddi, Raghu C.

2004-09-30T23:59:59.000Z

450

Advanced Particulate Filter Technologies for Direct Injection Gasoline Engine Applications  

Broader source: Energy.gov [DOE]

Specific designs and material properties have to be developed for gasoline particulate filters based on the different engine and exhaust gas characteristic of gasoline engines compared to diesel engines, e.g., generally lower levels of engine-out particulate emissions or higher GDI exhaust gas temperatures

451

GA103 a microprogrammable processor for online filtering  

E-Print Network [OSTI]

GA103 is a 16 bit microprogrammable processor, which emulates the PDP 11 instruction set. It is based on the Am2900 slices. It allows user- implemented microinstructions and addition of hardwired processors. It will perform online filtering tasks in the NA14 experiment at CERN, based on the reconstruction of transverse momentum of photons detected in a lead glass calorimeter. (3 refs).

Calzas, A; Danon, G

1981-01-01T23:59:59.000Z

452

FIESTA II a software tool for electronic filter design  

E-Print Network [OSTI]

This thesis describes a software program, FIESTA II, for the design of electronic filters. It is an expanded version of the FIESTA program written at Texas A&M University in 1989. It is a complete tool for both approximation and synthesis of many...

Kenzle, Wilfred Vance

2012-06-07T23:59:59.000Z

453

Modelling of Brain Consciousness based on Collaborative Adaptive Filters  

E-Print Network [OSTI]

Modelling of Brain Consciousness based on Collaborative Adaptive Filters Ling Lia, , Yili Xiaa of Technology, Japan c Laboratory for Advanced Brain Signal Processing, RIKEN Brain Science Institute, Saitama method for the discrimination between discrete states of brain con- sciousness is proposed, achieved

Kent, University of

454

Filtering Semi-Structured Documents Based on Faceted Feedback  

E-Print Network [OSTI]

Filtering Semi-Structured Documents Based on Faceted Feedback Lanbo Zhang, Yi Zhang School on documents. In some cases, users have some prior knowledge about what features are important for a document document should contain the feature "Language: Spanish"; a researcher working on HIV knows an article

Zhang, Yi

455

Simultaneous Segmentation and Filtering via Reduced Graph Cuts  

E-Print Network [OSTI]

provides small graphs while preserving thin structures but do not offer low memory usage when the amount [7,4,13]. In [7], binary energy functions are minimized for the shape fitting problem with graph cutsSimultaneous Segmentation and Filtering via Reduced Graph Cuts N. Lermé F. Malgouyres LAGA UMR CNRS

Malgouyres, François

456

Air filtration: Choosing the right filter class for HVAC systems  

Science Journals Connector (OSTI)

As anyone who works with air filtration knows, getting the best from a system is about more than choosing efficient media and correct installation. Thomas Carlson of Vokes Air explains the importance of using and selecting the right filter class for a typical HVAC system.

Thomas Carlson

2008-01-01T23:59:59.000Z

457

RAPID SEPARATION METHOD FOR ACTINIDES IN EMERGENCY AIR FILTER SAMPLES  

SciTech Connect (OSTI)

A new rapid method for the determination of actinides and strontium in air filter samples has been developed at the Savannah River Site Environmental Lab (Aiken, SC, USA) that can be used in emergency response situations. The actinides and strontium in air filter method utilizes a rapid acid digestion method and a streamlined column separation process with stacked TEVA, TRU and Sr Resin cartridges. Vacuum box technology and rapid flow rates are used to reduce analytical time. Alpha emitters are prepared using cerium fluoride microprecipitation for counting by alpha spectrometry. The purified {sup 90}Sr fractions are mounted directly on planchets and counted by gas flow proportional counting. The method showed high chemical recoveries and effective removal of interferences. This new procedure was applied to emergency air filter samples received in the NRIP Emergency Response exercise administered by the National Institute for Standards and Technology (NIST) in April, 2009. The actinide and {sup 90}Sr in air filter results were reported in {approx}4 hours with excellent quality.

Maxwell, S.; Noyes, G.; Culligan, B.

2010-02-03T23:59:59.000Z

458

ADAPTIVE IIR FILTERING: CONVERGENCE SPEED PROPERTIES IN THE UNDERMODELLED CASE  

E-Print Network [OSTI]

high order, possi- bly infinite (meaning its transfer function is not ratio- nal). It is also true for sufficient order can be applied with any confidence. In other words, does the existence of a good and concerning the local convergence speed of adap- tive IIR filters apply to the sufficient order case

Regalia, Phillip A.

459

A Monolithic Programmable Optical Filter for RF-Signal Processing  

E-Print Network [OSTI]

previously demonstrated the basic building block or unit cell of such a lattice filter, integrated in the InGaAsP is utilized at any one time. The individual pole or zero is isolated by utilizing active gain/absorption

Coldren, Larry A.

460

Using the particle filter for nuclear decision support  

Science Journals Connector (OSTI)

In the case of a nuclear accident, forecasting the spread of contamination is important for determining whether contamination thresholds are exceeded. In this study we explore ensemble modeling for forecasting threshold exceedance. This involves defining ... Keywords: Data assimilation, Monte Carlo, Nuclear accidents, Particle filter, Spatial aggregation, Threshold exceedance

Paul H. Hiemstra; Derek Karssenberg; Arjan Van Dijk; Steven M. De Jong

2012-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Fast Implementation of Multiple Oriented Filters Jeffrey E. Boyd  

E-Print Network [OSTI]

Fast Implementation of Multiple Oriented Filters Jeffrey E. Boyd Dept. of Computer Science University of Calgary Calgary AB T2N 1N4 boyd@cpsc.ucalgary.ca Jean Meloche Department of StatisticsDonald and Owen [8] and Hall and Tit­ terington [6]. Similarly, Meloche and Zamar [9] and Boyd and Meloche [3

Boyd, Jeffrey E.

462

Filtering Postures: Local Enforcement for Global Policies Joshua D. Guttman  

E-Print Network [OSTI]

should provide a desired service, and a service that will not damage the recipient. Different mechanisms guttman@mitre.org Abstract When packet filtering is used as a security mechanism, different routers may States Army CECOM contract DAAB 07-96-C-E601. This paper appears in the Proceedings, 1997 IEEE Symposium

Guttman, Joshua

463

Adaptive Filtering and Control for Devon Veronica Evelyn Yates  

E-Print Network [OSTI]

, but are disrupted when harmonics are present in the system. Filtering to remove these harmonics, but introduce a lag dependent on fluctuations in reactive power which may be caused by wind turbines, transformers, generators static var compensators(ASVC). ASVC are capable of compensating for variation in the reactive power load

464

Inflammatory response of lung cells exposed to whole, filtered, and  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Inflammatory response of lung cells exposed to whole, filtered, and Inflammatory response of lung cells exposed to whole, filtered, and hydrocarbon denuded diesel exhaust Title Inflammatory response of lung cells exposed to whole, filtered, and hydrocarbon denuded diesel exhaust Publication Type Journal Article Year of Publication 2007 Authors Holder, Amara L., Donald Lucas, Regine Goth-Goldstein, and Catherine P. Koshland Journal Chemosphere Volume 70 Pagination 13-19 Date Published 09/2007 Keywords air-liquid interface, combustion particle, human bronchial epithelial cells, interleukin-8 Abstract In vitro studies with the organic extracts of diesel particles have suggested that hydrocarbons such as PAH may play a role in an inflammatory response, but these have been limited by the possible artifacts introduced in the particle collection and processing. In this study, we avoid these artifacts and use an activated carbon denuder to remove hydrocarbons from the exhaust stream to investigate their role in the inflammatory response. Human bronchial epithelial cells (16HBE140) were exposed at the air-cell interface to diluted and aged exhaust from a diesel generator operated at partial and no load conditions. When particles were removed with a filter before cell exposure, exhaust gases accounted for almost half of the response compared to the whole exhaust. Removal of gas phase and a portion of the particle phase hydrocarbons with the denuder decreased the interleukin-8 (IL-8) secretion to unexposed levels

465

Fast XML document filtering by sequencing twig patterns  

Science Journals Connector (OSTI)

XML-enabled publish-subscribe (pub-sub) systems have emerged as an increasingly important tool for e-commerce and Internet applications. In a typical pub-sub system, subscribed users specify their interests in a profile expressed in the XPath language. ... Keywords: Prüfer sequences, XML filtering, selective dissemination of information, twig pattern

Joonho Kwon; Praveen Rao; Bongki Moon; Sukho Lee

2009-09-01T23:59:59.000Z

466

The Influence of Sampling and Filtering on Measured Wind Gusts  

Science Journals Connector (OSTI)

The theory by Rice for extreme value statistics is used to study the influence of filters in a wind measuring system on the measured gusts. An extension is made to discretely sampled data. Model results are compared with strong wind data from the ...

A. C. M. Beljaars

1987-12-01T23:59:59.000Z

467

ECG Fiducial Points Extraction by Extended Kalman Filtering  

E-Print Network [OSTI]

ECG Fiducial Points Extraction by Extended Kalman Filtering Mahsa Akhbari, Mohammad B. Shamsollahi and Christian Jutten Abstract--Most of the clinically useful information in Electro- cardiogram (ECG) signal can be obtained from the intervals, amplitudes and wave shapes (morphologies). The automatic detection of ECG

Paris-Sud XI, Université de

468

An Adaptive Kalman Filter for Removing Baseline Wandering in ECG  

E-Print Network [OSTI]

An Adaptive Kalman Filter for Removing Baseline Wandering in ECG Signals MA Mneimneh, EE Yaz, MT misleads ECG anno- tators from accurate identification of the ECG features. Previous work that deals with baseline wandering re- moval requires the identification of the QRS complex or other ECG features prior

Povinelli, Richard J.

469

Coated U(Mo) Fuel: As-Fabricated Microstructures  

SciTech Connect (OSTI)

As part of the development of low-enriched uranium fuels, fuel plates have recently been tested in the BR-2 reactor as part of the SELENIUM experiment. These fuel plates contained fuel particles with either Si or ZrN thin film coating (up to 1 µm thickness) around the U-7Mo fuel particles. In order to best understand irradiation performance, it is important to determine the starting microstructure that can be observed in as-fabricated fuel plates. To this end, detailed microstructural characterization was performed on ZrN and Si-coated U-7Mo powder in samples taken from AA6061-clad fuel plates fabricated at 500°C. Of interest was the condition of the thin film coatings after fabrication at a relatively high temperature. Both scanning electron microscopy and transmission electron microscopy were employed. The ZrN thin film coating was observed to consist of columns comprised of very fine ZrN grains. Relatively large amounts of porosity could be found in some areas of the thin film, along with an enrichment of oxygen around each of the the ZrN columns. In the case of the pure Si thin film coating sample, a (U,Mo,Al,Si) interaction layer was observed around the U-7Mo particles. Apparently, the Si reacted with the U-7Mo and Al matrix during fuel plate fabrication at 500°C to form this layer. The microstructure of the formed layer is very similar to those that form in U-7Mo versus Al-Si alloy diffusion couples annealed at higher temperatures and as-fabricated U-7Mo dispersion fuel plates with Al-Si alloy matrix fabricated at 500°C.

Emmanuel Perez; Dennis D. Keiser, Jr.; Ann Leenaers; Sven Van den Berghe; Tom Wiencek

2014-04-01T23:59:59.000Z

470

Fabrication of polycrystalline thin films by pulsed laser processing  

DOE Patents [OSTI]

A method is disclosed for fabricating polycrystalline thin films on low-temperature (or high-temperature) substrates which uses processing temperatures that are low enough to avoid damage to the substrate, and then transiently heating select layers of the thin films with at least one pulse of a laser or other homogenized beam source. The pulse length is selected so that the layers of interest are transiently heated to a temperature which allows recrystallization and/or dopant activation while maintaining the substrate at a temperature which is sufficiently low to avoid damage to the substrate. This method is particularly applicable in the fabrication of solar cells. 1 fig.

Mitlitsky, F.; Truher, J.B.; Kaschmitter, J.L.; Colella, N.J.

1998-02-03T23:59:59.000Z

471

Fabrication of polycrystalline thin films by pulsed laser processing  

DOE Patents [OSTI]

A method for fabricating polycrystalline thin films on low-temperature (or high-temperature) substrates which uses processing temperatures that are low enough to avoid damage to the substrate, and then transiently heating select layers of the thin films with at least one pulse of a laser or other homogenized beam source. The pulse length is selected so that the layers of interest are transiently heated to a temperature which allows recrystallization and/or dopant activation while maintaining the substrate at a temperature which is sufficiently low to avoid damage to the substrate. This method is particularly applicable in the fabrication of solar cells.

Mitlitsky, Fred (Livermore, CA); Truher, Joel B. (San Rafael, CA); Kaschmitter, James L. (Pleasanton, CA); Colella, Nicholas J. (Livermore, CA)

1998-02-03T23:59:59.000Z

472

Fluorescence Detector for Capillary Separations Fabricated by 3D Printing  

Science Journals Connector (OSTI)

Fluorescence Detector for Capillary Separations Fabricated by 3D Printing ... Additive manufacturing, also known as 3D printing, rapid prototyping, or solid-freeform technology, has become an efficient method for rapid prototyping and fabrication applications ranging from small home projects to architecture and industrial machining. ... Compared to the more expensive alternatives using the standard optic component, the 3D printing provides significant cost reduction and, especially, sharing of information between laboratories for easy replication or further modifications, customization of the spatial arrangement, and miniaturization. ...

Jan Prikryl; Frantisek Foret

2014-11-26T23:59:59.000Z

473

Fabrication Flaws in Reactor Pressure Vessel Repair Welds  

SciTech Connect (OSTI)

This paper describes the fabrication flaw distribution and characterization in the repair weld metal of reactor pressure vessels. This work indicates that the large flaws occur in these repairs. These results show that repair flaws are complex in composition and sometimes include cracks on the repair ends. Parametric analysis using an exponential fit is performed on the data. A description of repair flaw morphology is provided. Fabrication flaws in repairs are characterized using high sensitivity nondestructive ultrasonic testing, validation by other nondestructive evaluation (NDE) techniques, and complemented by destructive testing.

Schuster, George J.; Doctor, Steven R.

2007-12-01T23:59:59.000Z

474

Imaging of Diesel Particulate Filters using a High-Flux Neutron...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Imaging of Diesel Particulate Filters using a High-Flux Neutron Source Imaging of Diesel Particulate Filters using a High-Flux Neutron Source Detailed images of deposits identified...

475

Radio Frequency Diesel Particulate Filter Sensor Reduces Fuel Consumption, Wins R&D 100 Award  

Office of Energy Efficiency and Renewable Energy (EERE)

Radio Frequency Diesel Particulate Filter Sensor (RF-DPF) is a sensor that uses radio frequencies to measure the amount and distribution of soot and ash in the filters that remove particulate matter from the exhaust of diesel engines.

476

Development of a Sub-Grid Model of a Diesel Particulate Filter...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Sub-Grid Model of a Diesel Particulate Filter: application of the lattice-Boltzmann technique Development of a Sub-Grid Model of a Diesel Particulate Filter: application of the...

477

Modeling and interpreting the observed effects of ash on diesel particulate filter performance and regeneration  

E-Print Network [OSTI]

Diesel particulate filters (DPF) are devices that physically capture diesel particulates to prevent their release to the atmosphere. Diesel particulate filters have seen widespread use in on- and off-road applications as ...

Wang, Yujun, Ph. D. Massachusetts Institute of Technology

2014-01-01T23:59:59.000Z

478

Methods and apparatuses using filter banks for multi-carrier spread-spectrum signals  

DOE Patents [OSTI]

A transmitter includes a synthesis filter bank to spread a data symbol to a plurality of frequencies by encoding the data symbol on each frequency, apply a common pulse-shaping filter, and apply gains to the frequencies such that a power level of each frequency is less than a noise level of other communication signals within the spectrum. Each frequency is modulated onto a different evenly spaced subcarrier. A demodulator in a receiver converts a radio frequency input to a spread-spectrum signal in a baseband. A matched filter filters the spread-spectrum signal with a common filter having characteristics matched to the synthesis filter bank in the transmitter by filtering each frequency to generate a sequence of narrow pulses. A carrier recovery unit generates control signals responsive to the sequence of narrow pulses suitable for generating a phase-locked loop between the demodulator, the matched filter, and the carrier recovery unit.

Moradi, Hussein; Farhang, Behrouz; Kutsche, Carl A

2014-05-20T23:59:59.000Z

479

Methods and apparatuses using filter banks for multi-carrier spread-spectrum signals  

DOE Patents [OSTI]

A transmitter includes a synthesis filter bank to spread a data symbol to a plurality of frequencies by encoding the data symbol on each frequency, apply a common pulse-shaping filter, and apply gains to the frequencies such that a power level of each frequency is less than a noise level of other communication signals within the spectrum. Each frequency is modulated onto a different evenly spaced subcarrier. A demodulator in a receiver converts a radio frequency input to a spread-spectrum signal in a baseband. A matched filter filters the spread-spectrum signal with a common filter having characteristics matched to the synthesis filter bank in the transmitter by filtering each frequency to generate a sequence of narrow pulses. A carrier recovery unit generates control signals responsive to the sequence of narrow pulses suitable for generating a phase-locked loop between the demodulator, the matched filter, and the carrier recovery unit.

Moradi, Hussein; Farhang, Behrouz; Kutsche, Carl A

2014-10-14T23:59:59.000Z

480

A Model for Integrating an Adaptive Information Filter Utilizing Biosensor Data to Assess Cognitive Load  

Science Journals Connector (OSTI)

Information filtering is an effective tool for improving performance but requires real-time information about the user’s changing cognitive states to determine the optimal amount of filtering for each individu...

Curtis S. Ikehara; David N. Chin; Martha E. Crosby

2003-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "baghouse fabric filter" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

On-line implementation of an adaptive speed filter and its experimental demonstration  

E-Print Network [OSTI]

previously developed neural network speed filter is implemented for on-line induction motor speed estimation. The speed filter is constructed using a combination of five neural networks. A neural networks framework developed in this work is used to construct...

Abdul, Anis Mohamed

2012-06-07T23:59:59.000Z

482

Reducing Lubricant Ash Impact on Exhaust Aftertreatment with a Oil Conditioning Filter  

Broader source: Energy.gov [DOE]

Under the test conditions used in this study, the strong base filter had a significant and beneficial effect on the rate of oil degradation. The strong base filter reduced lubricant acidity by absorbing acidic contaminants in the lubricant

483

Nonlinearity and noise modeling of operational transconductance amplifiers for continuous time analog filters  

E-Print Network [OSTI]

A general framework for performance optimization of continuous-time OTA-C (Operational Transconductance Amplifier-Capacitor) filters is proposed. Efficient procedures for evaluating nonlinear distortion and noise valid for any filter of arbitrary...

Ramachandran, Arun

2006-08-16T23:59:59.000Z

484

Tunable Substrate Integrated Waveguide Filters Implemented with PIN Diodes and RF MEMS Switches  

E-Print Network [OSTI]

This thesis presents the first fully tunable substrate integrated waveguide (SIW) filter implemented with PIN diodes and RF MEMS switches. The methodology for tuning SIW filters is explained in detail and is used to create three separate designs...

Armendariz, Marcelino

2012-02-14T23:59:59.000Z

485

California Energy Standards Recognize the Importance of Filter Selection- Building America Top Innovation  

Broader source: Energy.gov [DOE]

This 2014 Top Innovation describes Building America research on HVAC air filter sizing that prompted a change in the California Title 24 Energy Code to encourage the use of higher MERV filters without degrading HVAC performance.

486

Cryogenic infrared filter made of alumina for use at millimeter wavelength  

Science Journals Connector (OSTI)

We propose a high-thermal-conductivity infrared filter using alumina for millimeter-wave detection systems. We constructed a prototype two-layer antireflection-coated alumina filter...

Inoue, Yuki; Matsumura, Tomotake; Hazumi, Masashi; Lee, Adrian T; Okamura, Takahiro; Suzuki, Aritoki; Tomaru, Takayuki; Yamaguchi, Hiroshi

2014-01-01T23:59:59.000Z

487

Multi-scale texture analysis of remote sensing images using gabor filter banks and wavelet transforms  

E-Print Network [OSTI]

to texture information extraction and utilization. This research focuses on the use of multi-scale image texture analysis techniques using Gabor filter banks and Wavelet transformations. Gabor filter banks model texture as irradiance patterns in an image over...

Ravikumar, Rahul

2009-05-15T23:59:59.000Z

488

Filter Design Considerations for High Performance Continuous-Time Low-Pass Sigma-Delta ADC  

E-Print Network [OSTI]

Continuous-time filters are critical components in the implementation of large bandwidth, high frequency, and high resolution continuous-time (CT) sigma-delta (??) analog-to-digital converters (ADCs). The loop filter defines the noise...

Gadde, Venkata Veera Satya Sair

2011-02-22T23:59:59.000Z

489

Probability distributions Statistical Estimation Kalman Filter Fisher Information Matrix Akaike Information Criterion Probabilities and Statistical Estimation  

E-Print Network [OSTI]

Probability distributions Statistical Estimation Kalman Filter Fisher Information Matrix Akaike Information Criterion Probabilities and Statistical Estimation Chapter 3 University of Amsterdam #12;Probability distributions Statistical Estimation Kalman Filter Fisher Information Matrix Akaike Information

Dorst, Leo

490

Graphene-based tunable terahertz and infrared band-pass filter  

Science Journals Connector (OSTI)

This paper presents a sheet of graphene as a simple band-pass filter in terahertz and infrared frequencies. The central frequency and quality factor of this band-pass filter can be...

Danaeifar, M; Granpayeh, N; Mohammadi, A; Setayesh, A

2013-01-01T23:59:59.000Z

491

A Mass-Conserving Quasi-Monotonic Filter for Use in Semi-Lagrangian Models  

Science Journals Connector (OSTI)

A new mass-conserving and quasi-monotonic antidiffusive filter has been designed for application in semi-Lagrangian-type models. The filter redistributes local mass such that the resulting values are brought closer to target values. The target ...

Eigil Kaas; Joakim R. Nielsen

2010-05-01T23:59:59.000Z

492

Testing an Active Diesel Particulate Filter on a 2-Cycle Marine...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Testing an Active Diesel Particulate Filter on a 2-Cycle Marine Engine Testing an Active Diesel Particulate Filter on a 2-Cycle Marine Engine Presentation given at DEER 2006,...

493

Dust loading on electrostatitically charged filters in a standard test and a real HVAC system  

Science Journals Connector (OSTI)

The efficiency and pressure drop of filters made from synthetic fibres carrying electrostatic charges and filters made from uncharged glass fibres were measured repeatedly for more than 19 weeks in operating HVAC systems. Results showed efficiency reductions as large as 40% for the filters made from charged fibres whereas the efficiency of filters made from uncharged fibres changed little. Clean filters were sent to a testing laboratory for efficiency measurements according to ASHRAE Standard 52.2-1999. When the filters experienced accelerated dust loading according to the ASHRAE procedure, the efficiency of both the glass and synthetic fibre filters increased. Efficiency reductions like those observed for the charged filters during actual use were not replicated by this standard test.

Peter C. Raynor; Soo Jae Chae

2003-01-01T23:59:59.000Z

494

Active carbon filter health condition detection with piezoelectric wafer active sensors  

E-Print Network [OSTI]

Active carbon filter health condition detection with piezoelectric wafer active sensors Jingjing Chemical Biological Center, 5183 Blackhawk Road, APG, MD USA 21010 ABSTRACT The impregnated active carbon in active carbon filters by combining the electromechanical impedance spectroscopy (EMIS

Giurgiutiu, Victor

495

Steerable Filters and Local Analysis of Image Structure William Tafel Freeman  

E-Print Network [OSTI]

Steerable Filters and Local Analysis of Image Structure by William Tafel Freeman B.S., Physics Filters and Local Analysis of Image Structure by William Tafel Freeman Submitted to the Media Arts

496

Design of a finite impulse response filter for the purpose of directional edge detection via spatial domain convolution  

E-Print Network [OSTI]

The purpose of this research was to design a spatial domain convolution filter capable of directional edge detection which has a specific relationship to a pre-defined filter in the frequency domain. Nobody has designed a directional filter...

Yeary, Mark Bradley

2012-06-07T23:59:59.000Z

497

Improvements in Terrain-Based Road Vehicle Localization By Initializing an Unscented Kalman Filter Using Particle Filters  

E-Print Network [OSTI]

the computational cost of the previous terrain- based localization algorithm. In order to localize a vehicle alongImprovements in Terrain-Based Road Vehicle Localization By Initializing an Unscented Kalman Filter of a road vehicle along a one-mile test track and 7 kilometer span of a highway using terrain

Brennan, Sean

498

Optimally Robust Kalman Filtering at Work: AO-, IO-, and Simultaneously IO-and AO-Robust Filters  

E-Print Network [OSTI]

Peter Ruckdeschel Fraunhofer ITWM, Abt. Finanzmathematik, Fraunhofer-Platz 1, 67663 Kaiserslautern. (2006), Fried et al. (2007). Keywords: robustness, Kalman Filter, innovation outlier, additive outlier), and to some extent Ruckdeschel (2001, Sect. 1.5). Email address: Peter.Ruckdeschel@itwm.fraunhofer.de (Peter

Ruckdeschel, Peter

499

A Multi-Task Feature Selection Filter for Microarray Classification Liang Lan and Slobodan Vucetic  

E-Print Network [OSTI]

classification data sets. The filter uses Kruskal-Wallis test on auxiliary data sets and ranks genes based

Vucetic, Slobodan

500

Closure of 324 Facility potential HEPA filter failure unreviewed safety questions  

SciTech Connect (OSTI)

This document summarizes the activities which occurred to resolve an Unreviewed Safety Question (USQ) for the 324 Facility [Waste Technology Engineering Laboratory] involving Potential HEPA Filter Breach. The facility ventilation system had the capacity to fail the HEPA filters during accident conditions which would totally plug the filters. The ventilation system fans were modified which lowered fan operating parameters and prevented HEPA filter failures which might occur during accident conditions.

Enghusen, M.B.

1997-11-07T23:59:59.000Z