Powered by Deep Web Technologies
Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Microwave Regenerated DPF for Auxiliary Power Units and Diesel...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Microwave Regenerated DPF for Auxiliary Power Units and Diesel Hybrid Vehicles Microwave Regenerated DPF for Auxiliary Power Units and Diesel Hybrid Vehicles Microwave regeneration...

2

E-Print Network 3.0 - auxiliary power units Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

units Search Powered by Explorit Topic List Advanced Search Sample search results for: auxiliary power units...

3

E-Print Network 3.0 - auxiliary power unit Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

unit Search Powered by Explorit Topic List Advanced Search Sample search results for: auxiliary power unit...

4

NOISE CONTROL METHODS FOR A RECIPROCATING AIR COMPRESSOR USED IN FUEL CELL AUXILIARY POWER UNIT (APU)  

E-Print Network (OSTI)

NOISE CONTROL METHODS FOR A RECIPROCATING AIR COMPRESSOR USED IN FUEL CELL AUXILIARY POWER UNIT Air pollution Noise pollution Engine life Remedy Fuel cell APU Quieter Low emissions Exhaust Heat, Case History: Noise control approaches for an air-compressor in a fuel-cell auxiliary power unit, Noise

Carver, Jeffrey C.

5

Cost evaluation of a novel 5-kW diesel-powered solid oxide fuel cell auxiliary power unit (APU).  

E-Print Network (OSTI)

??Idling heavy-duty trucks result in poor fuel consumption and harmful emissions. The Auxiliary Power Unit (APU) is one of the methods to reduce idling. The… (more)

Pillala, Chakradhar.

2009-01-01T23:59:59.000Z

6

Hydrogen Generation from Dimethyl Ether for Fuel Cell Auxiliary Power Units  

Science Journals Connector (OSTI)

Hydrogen Generation from Dimethyl Ether for Fuel Cell Auxiliary Power Units ... Vehicle manufacturers are rushing ahead with research into alternative fuels such as dimethyl ether (DME), biodiesel, methanol, ethanol, and hydrogen. ...

Marita Nilsson; Lars J. Pettersson; Bĺrd Lindström

2006-07-29T23:59:59.000Z

7

Solid Oxide Fuel Cell Auxiliary Power Units for Long-Haul Trucks  

E-Print Network (OSTI)

Solid Oxide Fuel Cell Auxiliary Power Units for Long-Haul Trucks Modeling and Control Mohammad and maintenance of the truck engine. While still in the research phase, Solid Oxide Fuel Cell (SOFC) based APUs are used to provide this power, rather than idling the engine, because they use less fuel and reduce wear

8

Fuel Preprocessor (FPP) for a Solid Oxide Fuel Cell Auxiliary Power Unit  

SciTech Connect

Auxiliary Power Units (APUs), driven by truck engines, consume over 800 million gallon of diesel fuel while idling. Use of separate SOFC based APUs are an excellent choice to reduce the cost and pollution associated with producing auxiliary power. However, diesel fuel is a challenging fuel to use in fuel cell systems because it has heavy hydrocarbons that can transform into carbon deposits and gums that can block passages and deactivate fuel reformer and fuel cell reactor elements. The work reported herein addresses the challenges associated with the diesel fuel sulfur and carbon producing contaminants in a Fuel Preprocessor (FPP). FPP processes the diesel fuel onboard and ahead of the reformer to reduce its carbon deposition tendency and its sulfur content, thus producing a fuel suitable for SOFC APU systems. The goal of this DOE supported Invention and Innovation program was to design, develop and test a prototype Fuel Preprocessor (FPP) that efficiently and safely converts the diesel fuel into a clean fuel suitable for a SOFC APU system. The goals were achieved. A 5 kWe FPP was designed, developed and tested. It was demonstrated that FPP removes over 80% of the fuel sulfur and over 90% of its carbon residues and it was demonstrated that FPP performance exceeds the original project goals.

M. Namazian, S. Sethuraman and G. Venkataraman

2004-12-31T23:59:59.000Z

9

Techno-economic evaluation of using biomass-fired auxiliary units for supplying energy requirements of CO2 capture in coal-fired power plants  

Science Journals Connector (OSTI)

Abstract Parasitically providing the energy required for CO2 capture from retrofitted coal power plants can lead to a significant loss in output of electricity. In this study, different configurations of auxiliary units are investigated to partially or totally meet the energy requirements for MEA post-combustion capture in a 500 MW sub-critical coal-fired plant. The auxiliary unit is either a boiler, providing only the heat required for solvent regeneration in the capture process or a combined heat and power (CHP) unit, providing both heat and electricity. Using biomass in auxiliary units, the grid loss is reduced without increasing fossil fuel consumption. The results show that using a biomass CHP unit is more favourable than using a biomass boiler both in terms of CO2 emission reductions and power plant economic viability. By using an auxiliary biomass CHP unit, both the emission intensity and the cost of electricity would be marginally lower than for a coal plant with capture. Further emission reductions occur if CO2 is captured both from the coal plant and the auxiliary biomass CHP, resulting in negative emissions. However, high incentive schemes (a carbon price higher than 55 $/t CO2 or a combination of lower carbon price and renewable energy certificates) or a low biomass price (lower than 1 $/GJ) are required to make CO2 capture from both the coal plant and the auxiliary biomass CHP unit economically attractive. All cost comparisons are for CO2 capture only and CO2 transport and storage are not included in this study.

Zakieh Khorshidi; Minh T. Ho; Dianne E. Wiley

2015-01-01T23:59:59.000Z

10

Auxiliary feedwater system risk-based inspection guide for the Diablo Canyon Unit 1 Nuclear Power Plant  

SciTech Connect

This document presents a compilation of auxiliary feedwater (AFW) system failure information which has been screened for risk significance in terms of failure frequency and degradation of system performance. It is a risk-prioritized listing of failure events and their causes that are significant enough to warrant consideration in inspection planning at Diablo Canyon. This information is presented to provide inspectors with increased resources for inspection planning at Diablo Canyon. The risk importance of various component failure modes was identified by analysis of the results of probabilistic risk assessments (PRAs) for many pressurized water reactors (PWRs). However, the component failure categories identified in PRAs are rather broad, because the failure data used in the PRAs is an aggregate of many individual failures having a variety of root causes. In order to help inspectors to focus on specific aspects of component operation, maintenance and design which might cause these failures, an extensive review of component failure information was performed to identify and rank the root causes of these component failures. Both Diablo Canyon and industry-wide failure information was analyzed. Failure causes were sorted on the basis of frequency of occurrence and seriousness of consequence, and categorized as common cause failures, human errors, design problems, or component failures. This information permits an inspector to concentrate on components important to the prevention of core damage. Other components which perform essential functions, but which are not included because of high reliability or redundancy, must also be addressed to ensure that degradation does not increase their failure probabilities, and hence their risk importances. 23 refs., 1 fig., 1 tab.

Gore, B.F.; Vo, T.V.; Harrison, D.G.

1990-08-01T23:59:59.000Z

11

Fuzzy Based Energy Management Control of A Hybrid Fuel Cell Auxiliary Power System  

E-Print Network (OSTI)

battery auxiliary power unit (APU) for remote applications where a fuel cell is the main energy source for decentralized or distributed energy production, such as telecom, remote sites or even for military applicationsFuzzy Based Energy Management Control of A Hybrid Fuel Cell Auxiliary Power System M. Godoy Simões1

Simões, Marcelo Godoy

12

Auxiliary power controls on the Nelson River HVDC scheme  

SciTech Connect

This paper describes the auxiliary power controls on the Nelson River HVDC scheme. It shows how the fast control feature of the HVDC link can be utilized to enhance the operation of an integrated ac/dc power system.

Chand, J. (Manitoba Hydro, Winnipeg, Manitoba (CA))

1992-02-01T23:59:59.000Z

13

E-Print Network 3.0 - auxiliary power system Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

system Search Powered by Explorit Topic List Advanced Search Sample search results for: auxiliary power system...

14

Analysis of the market for diesel PEM fuel cell auxiliary power units onboard long-haul trucks and of its implications for the large-scale adoption of PEM \\{FCs\\}  

Science Journals Connector (OSTI)

Proton exchange membrane fuel cells (PEM FCs) offer a promising alternative to internal combustion engines in road transport. During the last decade PEM FC research, development and demonstration (RD&D) activities have been steadily increasing worldwide, and targets have been set to begin their commercialisation in road transport by 2015–2020. However, there still is considerable uncertainty on whether these targets will actually be met. The picture is complex and market and technology issues are closely interlinked; investment in RD&D projects is essential but not sufficient; the development of suitable early markets is also necessary and policy is set to play an important role. Auxiliary power units (APUs) are generally regarded as one important early market for \\{FCs\\} in transport. This paper analyses the possible future market for diesel PEM FC \\{APUs\\} onboard long-haul trucks and its implications for the development of PEM \\{FCs\\} in general. The analysis, part of the project HyTRAN (EC Contract no. 502577), is aided by the use of a dynamic simulation model of technology and markets developed by the author. Results suggest that an interesting window of opportunity for diesel PEM FC \\{APUs\\} exists but this is subject to additional research particularly targeted at the rapid development of fuel processors.

Marcello Contestabile

2010-01-01T23:59:59.000Z

15

MODELICA LIBRARY FOR SIMULATING ENERGY CONSUMPTION OF AUXILIARY UNITS IN HEAVY VEHICLES1  

E-Print Network (OSTI)

MODELICA LIBRARY FOR SIMULATING ENERGY CONSUMPTION OF AUXILIARY UNITS IN HEAVY VEHICLES1 Niklas.se Abstract Models that can be used to analyse the fuel consumption of auxiliary units in heavy vehicles, a model library is developed in the modelling language Modelica. The library contains a mixture of models

Johansson, Karl Henrik

16

DPF for a Tractor Auxiliary Power Unit  

Energy.gov (U.S. Department of Energy (DOE))

Poster presentation at the 2007 Diesel Engine-Efficiency & Emissions Research Conference (DEER 2007). 13-16 August, 2007, Detroit, Michigan. Sponsored by the U.S. Department of Energy's (DOE) Office of FreedomCAR and Vehicle Technologies (OFCVT).

17

Precision control of high temperature furnaces using an auxiliary power supply and charged practice current flow  

DOE Patents (OSTI)

Two power supplies are combined to control a furnace. A main power supply heats the furnace in the traditional manner, while the power from the auxiliary supply is introduced as a current flow through charged particles existing due to ionized gas or thermionic emission. The main power supply provides the bulk heating power and the auxiliary supply provides a precise and fast power source such that the precision of the total power delivered to the furnace is improved.

Pollock, George G. (San Ramon, CA)

1997-01-01T23:59:59.000Z

18

Precision control of high temperature furnaces using an auxiliary power supply and charged particle current flow  

DOE Patents (OSTI)

Two power supplies are combined to control a furnace. A main power supply heats the furnace in the traditional manner, while the power from the auxiliary supply is introduced as a current flow through charged particles existing due to ionized gas or thermionic emission. The main power supply provides the bulk heating power and the auxiliary supply provides a precise and fast power source such that the precision of the total power delivered to the furnace is improved. 5 figs.

Pollock, G.G.

1997-01-28T23:59:59.000Z

19

UC Santa Barbara Policy 6015 Issuing Unit: Housing & Auxiliary Services Date: February 1, 1985  

E-Print Network (OSTI)

, Campus Food Service. The Director will authorize the placement of all vending machines and will negotiateUC Santa Barbara Policy 6015 Policies Issuing Unit: Housing & Auxiliary Services Date: February 1, 1985 VENDING MACHINES I. REFERENCES: A. UCSB Policies Manual, Policy 6010, Sale or Distribution of Food

Sideris, Thomas C.

20

SIMULATING ENERGY CONSUMPTION OF AUXILIARY UNITS IN HEAVY VEHICLES1 Niklas Pettersson, Karl Henrik Johansson  

E-Print Network (OSTI)

in the modelling language Modelica. The library contains a mixture of models developed from physical principlesSIMULATING ENERGY CONSUMPTION OF AUXILIARY UNITS IN HEAVY VEHICLES1 Niklas Pettersson, Karl Henrik and models fitted to collected data. Modelling of the cooling system is described in some detail. Simulation

Johansson, Karl Henrik

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Control of CO2 emission through enhancing energy efficiency of auxiliary power equipment in thermal power plant  

Science Journals Connector (OSTI)

Abstract This paper describes the results of energy efficiency enhancement in 23 numbers of 210 MW coal fired power plants spread over India. Energy efficiency improvement of major auxiliary equipment with different plant load factors are summarized here with improved performance. The effect of plant load factor on all major auxiliary equipment and improvement in performance of auxiliary equipment are discussed in this paper. Operation of the plant at improved plant load factor reduced the specific auxiliary power from 11.23% at 70% PLF to 8.74% at 100% PLF that reduced the net auxiliary power by 9.1 MU/year that is an equivalent reduction of CO2 emission by 9500 t/year. Optimizing the excess air, controlling the furnace ingress, enhanced energy efficiency of individual equipment by proper maintenance, etc., improves the plant capacity and reduces the overall auxiliary power by about 1.5–2.1% of gross energy generation i.e., equivalent CO2 reduction of 23,000–32,400 t/year and release an additional power of about 3.5 MW (for a typical one 210 MW power plant) into grid.

Rajashekar P. Mandi; Udaykumar R. Yaragatti

2014-01-01T23:59:59.000Z

22

The development of a high reliability auxiliary power system for a coal-fired cycling generating station  

SciTech Connect

An auxiliary system for a fossil generating station is evolved based on operating and reliability criteria including the capabilities of switchgear and standard auxiliary transformer impedances. These criteria are used to design a flexible and reliable auxiliary power system for a cyclic duty power generating station. The effect of mechanical equipment selection on the auxiliary power system design is discussed. An economic comparison of single voltage versus dual-voltage is made. A one-line diagram of the resulting proposed system is included.

Jackowski, M.; Bailey, M.

1983-06-01T23:59:59.000Z

23

Study of auxiliary power systemsfor offshore wind turbines.  

E-Print Network (OSTI)

?? Until today the offshore wind power has grown in a steady pace and many new wind farms are being constructed around the globe. An… (more)

Berggren, Joakim

2013-01-01T23:59:59.000Z

24

E-Print Network 3.0 - auxiliary unit members Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

and Computer Engineering, University of California at Santa Barbara Collection: Engineering ; Biology and Medicine 3 University Services Auxiliary Services Summary:...

25

Diesel Reforming for Fuel Cell Auxiliary Power Units  

SciTech Connect

This objective of this project was to develop technology suitable for onboard reforming of diesel. The approach was to examine catalytic partial oxidation and steam reforming.

Borup, R.; Parkinson, W. J.; Inbody, M.; Brosha, E.L.; Guidry, D.R.

2005-01-27T23:59:59.000Z

26

Diesel Fueled SOFC for Class 7/Class 8 On-Highway Truck Auxiliary Power  

SciTech Connect

The following report documents the progress of the Cummins Power Generation (CPG) Diesel Fueled SOFC for Class 7/Class 8 On-Highway Truck Auxiliary Power (SOFC APU) development and final testing under the U.S. Department of Energy (DOE) Energy Efficiency and Renewable Energy (EERE) contract DE-FC36-04GO14318. This report overviews and summarizes CPG and partner development leading to successful demonstration of the SOFC APU objectives and significant progress towards SOFC commercialization. Significant SOFC APU Milestones: Demonstrated: Operation meeting SOFC APU requirements on commercial Ultra Low Sulfur Diesel (ULSD) fuel. SOFC systems operating on dry CPOX reformate. Successful start-up and shut-down of SOFC APU system without inert gas purge. Developed: Low cost balance of plant concepts and compatible systems designs. Identified low cost, high volume components for balance of plant systems. Demonstrated efficient SOFC output power conditioning. Demonstrated SOFC control strategies and tuning methods.

Vesely, Charles John-Paul [Cummins Power Generation; Fuchs, Benjamin S. [Cummins Power Generation; Booten, Chuck W. [Protonex Technology, LLC

2010-03-31T23:59:59.000Z

27

A general purpose diagnostic technique for marine diesel engines – Application on the main propulsion and auxiliary diesel units of a marine vessel  

Science Journals Connector (OSTI)

Diesel engines are widely used in marine applications (i.e. propulsion and auxiliaries) except from a few cases where gas or steam turbines are used. This is the result of their high efficiency, power concentration and reliability compared to other compatible or alternative power sources. The proper and efficient operation of the engines (main engine and diesel generator units) in marine applications is critical, and therefore techniques or systems that determine engine current condition and detect potential faults are extremely important. Furthermore, it is advantageous when such techniques can be applied on different engine configurations and provide reliable results, because on a vessel usually exist diesel engines of different type, i.e. the main propulsion unit is a large low-speed two-stroke diesel engine while the diesel generators are four-stroke medium or high speed engines. In the present work is described and evaluated for the first time the application of an improved diagnostic technique, developed by the authors, on both the main engine and the auxiliary units of a commercial marine vessel. The diagnostic technique is based on a thermodynamic simulation model. The simulation model embedded in the technique has been modified, namely an existing two-zone model is replaced by a multi-zone one. With this modification it is avoided model constant tuning with the operating conditions. This is extremely important for the diagnostic philosophy of the proposed technique. Using data from engine shop tests, the simulation model is calibrated (i.e. model constants are determined) and the engine reference condition is obtained. The simulation model is then used to estimate the current engine condition, using field measurements (i.e. cylinder pressure measurements, periphery data, etc.). From the results it is revealed that the diagnosis method provides detailed information for the operating condition of both engines and the values of parameters that cannot be measured on the field. To further evaluate the diagnostic procedure, results of the diagnosis analysis are compared with respective readings from existing instrumentation (i.e. brake power output, etc.), showing good agreement. From the investigation it is shown that the diagnostic technique can be applied on both engine types without modifications providing a useful integrated solution for the entire vessel power plant. This is extremely important because conventional systems are usually suitable only for the main engine even though auxiliary units are of significant importance.

V.T. Lamaris; D.T. Hountalas

2010-01-01T23:59:59.000Z

28

Portable Power Projects  

Energy.gov (U.S. Department of Energy (DOE))

DOE's Portable Power, Auxiliary Power Units, and R&D for Off-Road Fuel Cell Applications Research Projects Awarded April 2004

29

E-Print Network 3.0 - auxiliary power supply Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

of the Power Price, when the wind... kWh wind only total supply 12;Advantages of Wind Power in the future? Increased regulatory capabilities... Independent power cells...

30

Auxiliary feedwater system risk-based inspection guide for the Byron and Braidwood nuclear power plants  

SciTech Connect

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. Byron and Braidwood were selected for the fourth study in this program. The produce of this effort is a prioritized listing of AFW failures which have occurred at the plants and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the Byron/Braidwood plants. 23 refs., 1 fig., 1 tab.

Moffitt, N.E.; Gore, B.F.: Vo, T.V. (Pacific Northwest Lab., Richland, WA (USA))

1991-07-01T23:59:59.000Z

31

Auxiliary feedwater system risk-based inspection guide for the H. B. Robinson nuclear power plant  

SciTech Connect

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. H. B. Robinson was selected as one of a series of plants for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the H. B. Robinson plant.

Moffitt, N.E.; Lloyd, R.C.; Gore, B.F.; Vo, T.V. [Pacific Northwest Lab., Richland, WA (United States); Garner, L.W. [Nuclear Regulatory Commission, Washington, DC (United States)

1993-08-01T23:59:59.000Z

32

Auxiliary feedwater system risk-based inspection guide for the McGuire nuclear power plant  

SciTech Connect

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. McGuire was selected as one of a series of plants for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the McGuire plant.

Bumgardner, J.D.; Lloyd, R.C.; Moffitt, N.E.; Gore, B.F.; Vo, T.V. [Pacific Northwest Lab., Richland, WA (United States)

1994-05-01T23:59:59.000Z

33

Auxiliary feedwater system risk-based inspection guide for the South Texas Project nuclear power plant  

SciTech Connect

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. South Texas Project was selected as a plant for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by the NRC inspectors in preparation of inspection plans addressing AFW risk important components at the South Texas Project plant.

Bumgardner, J.D.; Nickolaus, J.R.; Moffitt, N.E.; Gore, B.F.; Vo, T.V. [Pacific Northwest Lab., Richland, WA (United States)

1993-12-01T23:59:59.000Z

34

Low-temperature fuel cell systems for commercial airplane auxiliary power.  

SciTech Connect

This presentation briefly describes the ongoing study of fuel cell systems on-board a commercial airplane. Sandia's current project is focused on Proton Exchange Membrane (PEM) fuel cells applied to specific on-board electrical power needs. They are trying to understand how having a fuel cell on an airplane would affect overall performance. The fuel required to accomplish a mission is used to quantify the performance. Our analysis shows the differences between the base airplane and the airplane with the fuel cell. There are many ways of designing a system, depending on what you do with the waste heat. A system that requires ram air cooling has a large mass penalty due to increased drag. The bottom-line impact can be expressed as additional fuel required to complete the mission. Early results suggest PEM fuel cells can be used on airplanes with manageable performance impact if heat is rejected properly. For PEMs on aircraft, we are continuing to perform: (1) thermodynamic analysis (investigate configurations); (2) integrated electrical design (with dynamic modeling of the micro grid); (3) hardware assessment (performance, weight, and volume); and (4) galley and peaker application.

Curgus, Dita Brigitte; Pratt, Joseph William; Akhil, Abbas Ali; Klebanoff, Leonard E.

2010-11-01T23:59:59.000Z

35

Lianyungang Zhongneng United Wind Power Co Ltd | Open Energy...  

Open Energy Info (EERE)

United Wind Power Co Ltd Jump to: navigation, search Name: Lianyungang Zhongneng United Wind Power Co Ltd Place: Lianyungang, Jiangsu Province, China Sector: Wind energy Product: A...

36

Evaluation of Fuel Cell Auxiliary Power Units for Heavy-Duty Diesel Trucks  

E-Print Network (OSTI)

Cost Estimates for Polymer Electrolyte Membrane (PEM) Fuel Cellsmanufacturing costs of automotive PEM fuel cell systems incosts of di?erent sizes of direct-hydrogen PEM fuel cell

2002-01-01T23:59:59.000Z

37

Microwave Regenerated DPF for Auxiliary Power Units and Diesel Hybrid Vehicles  

Energy.gov (U.S. Department of Energy (DOE))

Microwave regeneration of the DPF can be done without diesel fuel or a catalyst in less than 5 minutes with the engine off.

38

Evaluation of Fuel Cell Auxiliary Power Units for Heavy-Duty Diesel Trucks  

E-Print Network (OSTI)

diesel fuel consumption, lubricant changes, and enginefuel consumption, and costs associated with diesel engineDiesel Idling diesel consumption Diesel fuel cost Lubricant cost Engine

2002-01-01T23:59:59.000Z

39

Evaluation of Fuel Cell Auxiliary Power Units for Heavy-Duty Diesel Trucks  

E-Print Network (OSTI)

diesel fuel consumption, lubricant changes, and enginefuel consumption, and costs associated with diesel enginediesel consumption Diesel fuel cost Lubricant cost Engine

2002-01-01T23:59:59.000Z

40

Evaluation of Fuel Cell Auxiliary Power Units for Heavy-Duty Diesel Trucks  

E-Print Network (OSTI)

where K 0 is the cost of the fuel cell stack, fuel storagefuel cell stack, plumbing, inverter, fuel storage tank, and accessories), fuel cost,costs of about $700 per kW for the basic solid oxide fuel cell stack

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Green Power Marketing in the United States: A Status Report ...  

NLE Websites -- All DOE Office Websites (Extended Search)

A2-44094 October 2008 Green Power Marketing in the United States: A Status Report (11th Edition) Lori Bird, Claire Kreycik, and Barry Friedman Green Power Marketing in the United...

42

Power functions and envelopes for unit root tests  

E-Print Network (OSTI)

This paper studies power functions and envelopes for covariate augmented unit root tests. The power functions are calculated by integrating the characteristic function, allowing accurate evaluation of the power envelope ...

Juhl, Ted P.; Xiao, Z. J.

2003-04-01T23:59:59.000Z

43

United Power, Inc | Open Energy Information  

Open Energy Info (EERE)

Power, Inc Power, Inc Place Colorado Utility Id 19499 Utility Location Yes Ownership C NERC Location WECC NERC WECC Yes Activity Retail Marketing Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] Energy Information Administration Form 826[2] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png No rate schedules available. Average Rates Residential: $0.1150/kWh Commercial: $0.0990/kWh Industrial: $0.0830/kWh The following table contains monthly sales and revenue data for United Power, Inc (Colorado). Month RES REV (THOUSAND $) RES SALES (MWH) RES CONS COM REV (THOUSAND $) COM SALES (MWH) COM CONS IND_REV (THOUSAND $) IND SALES (MWH) IND CONS OTH REV (THOUSAND $) OTH SALES (MWH) OTH CONS TOT REV (THOUSAND $) TOT SALES (MWH) TOT CONS

44

Power system with an integrated lubrication circuit  

DOE Patents (OSTI)

A power system includes an engine having a first lubrication circuit and at least one auxiliary power unit having a second lubrication circuit. The first lubrication circuit is in fluid communication with the second lubrication circuit.

Hoff, Brian D. (East Peoria, IL); Akasam, Sivaprasad (Peoria, IL); Algrain, Marcelo C. (Peoria, IL); Johnson, Kris W. (Washington, IL); Lane, William H. (Chillicothe, IL)

2009-11-10T23:59:59.000Z

45

Power and Energy Measurement Units and Techniques  

Science Journals Connector (OSTI)

The SI system (International System of Units) is a set of definitions and rules which provides an organic and consistent approach for obtaining the units for each quantity.

Giovanni Petrecca

1993-01-01T23:59:59.000Z

46

Power and Energy Measurement Units and Techniques  

Science Journals Connector (OSTI)

The SI system (International System of Units) is a set of definitions and rules which provides an organic and consistent approach for obtaining the units for each quantity.

Giovanni Petrecca

2014-01-01T23:59:59.000Z

47

Characterization of wind power resource in the United States*  

E-Print Network (OSTI)

Characterization of wind power resource in the United States* U. Bhaskar Gunturu and C. Adam Chemistry and Physics Characterization of wind power resource in the United States U. B. Gunturu and C. A, 120 m turbine hub heights. The wind power density (WPD) estimates at 50 m are qualitatively similar

48

Phasor Measurement Unit Data in Power System State Estimation  

E-Print Network (OSTI)

by supervisory control and data acquisition (SCADA) devices. The incorporation of PMU measurementsPhasor Measurement Unit Data in Power System State Estimation Intermediate Project Report Power Center since 1996 PSERC #12;Power Systems Engineering Research Center Phasor Measurement Unit Data

49

Guodian United Power Technology Co Ltd formerly Guodian Union Power | Open  

Open Energy Info (EERE)

United Power Technology Co Ltd formerly Guodian Union Power United Power Technology Co Ltd formerly Guodian Union Power Jump to: navigation, search Name Guodian United Power Technology Co Ltd (formerly Guodian Union Power) Place Beijing, Beijing Municipality, China Zip 100044 Sector Wind energy Product China-based wind turbine maker and daughter company of state-owned power generator China Guodian. References Guodian United Power Technology Co Ltd (formerly Guodian Union Power)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Guodian United Power Technology Co Ltd (formerly Guodian Union Power) is a company located in Beijing, Beijing Municipality, China . References ↑ "Guodian United Power Technology Co Ltd (formerly Guodian

50

A power supply unit for discharging the plasma electron source  

Science Journals Connector (OSTI)

A power supply unit for discharging a low-temperature plasma generator based on discharge in the crossed electric and magnetic fields is described. The unit operates in a stationary mode with a preset stabiliz...

D. A. Antonovich; V. A. Gruzdev; V. G. Zalesskii…

51

Simulation of a generator for a wind-power unit  

Science Journals Connector (OSTI)

Analysis of excitation systems of generators for wind-power units is carried out, a software package for generator simulation is presented, and the sequence of the...

I. M. Kirpichnikova; A. S. Mart’yanov; E. V. Solomin

2013-10-01T23:59:59.000Z

52

Green Power Marketing in the United States: A Status Report ...  

NLE Websites -- All DOE Office Websites (Extended Search)

6581 September 2009 Green Power Marketing in the United States: A Status Report (2008 Data) Lori Bird, Claire Kreycik, and Barry Friedman National Renewable Energy Laboratory 1617...

53

Floating type ocean wave power station equipped with hydroelectric unit  

Science Journals Connector (OSTI)

The authors have invented the unique ocean wave power station, which is composed of the floating ... wave pitch and the counter-rotating type wave power unit, its runners are submerged in the ... as requested, be...

Shun Okamoto; Toshiaki Kanemoto; Toshihiko Umekage

2013-10-01T23:59:59.000Z

54

Restricting Legislative Power to Tax in the United States  

E-Print Network (OSTI)

The Government’s authority to impose taxes is one of its most pervasive and fundamental powers. In the United States, this power is granted to Congress by the U.S. Constitution with few explicit restrictions. Moreover, the ...

Kaye, Tracy; Mazza, Stephen W.

2006-01-01T23:59:59.000Z

55

SMERDON ET AL.: AUXILIARY MATERIAL Auxiliary Material  

E-Print Network (OSTI)

run [Ammann et al., 2007; hereinafter CCSM] and the GKSS ECHO-g ERIK2 run [González-Rouco et al., 2006; hereinafter ECHO-g]. The annual means of the modeled temperature fields are interpolated to 5° latitude;SMERDON ET AL.: AUXILIARY MATERIAL 2 ECHO-g simulations, respectively. The above conventions

Smerdon, Jason E.

56

United Power - Renewable Energy Rebate Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

United Power - Renewable Energy Rebate Program United Power - Renewable Energy Rebate Program United Power - Renewable Energy Rebate Program < Back Eligibility Commercial Residential Savings Category Solar Buying & Making Electricity Heating & Cooling Water Heating Wind Maximum Rebate PV: 2,250 Wind: 1,500 Solar Water Heating: 1,000 Program Info State Colorado Program Type Utility Rebate Program Rebate Amount PV: 0.75/W Wind: 0.50/W Solar Water Heating: 25/MBtu Provider United Power United Power is providing rebates to their customers for the purchase of photovoltaic (PV), wind, and solar water heating systems. These incentives are separate from the rebates provided by the Colorado Governor's Energy Office and require separate applications. PV and wind systems must be grid-connected. Systems up to 25 kW in capacity may be installed, but

57

Development Methodology for Power-Dense Military Diesel Engine  

Energy.gov (U.S. Department of Energy (DOE))

Laboratory data and modeling results are presented on a military auxiliary power unit engine that has a peak efficiency of 35.3% at an output shaft power of 25 kW.

58

BioPower Application (United States) | Open Energy Information  

Open Energy Info (EERE)

BioPower Application (United States) BioPower Application (United States) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: BioPower Application (United States) Focus Area: Ethanol Topics: Potentials & Scenarios Website: rpm.nrel.gov/biopower/biopower/launch Equivalent URI: cleanenergysolutions.org/content/biopower-application-united-states,ht Language: English Policies: Deployment Programs DeploymentPrograms: Demonstration & Implementation BioPower is an interactive map for comparing biomass feedstocks and biopower by location. This tool helps users select from and apply biomass data layers to a map as well as query and download biopower and feedstock data. The analysis function offers common conversion factors that allow users to determine the potential biopower production for a selected

59

Economic Efficiency of a Power Unit Adapted to Cogeneration  

Science Journals Connector (OSTI)

This chapter presents a number of alternatives concerning economic analysis of power unit with the rated capacity of 370 MW operating in cogeneration for case of feeding heaters from A2 and A3 extractions of t...

Ryszard Bartnik; Zbigniew Buryn

2011-01-01T23:59:59.000Z

60

A portable measurement system for power profiling of processing units  

Science Journals Connector (OSTI)

Abstract The paper deals with the design and the metrologic characterization of a portable power consumption measurement system capable to correlate the average power consumption of a central processing unit to processor performance. A survey of power measurement systems designed for the evaluation of computer energy performance is provided. The design steps for the proposed power measurement system and its comprehensive hardware and software descriptions are reported. Furthermore, a calibration procedure of the power measurement system is described. Five benchmark tests have been executed on an Intel Pentium D processor and the measured power loads are reported and discussed.

F. Picariello; S. Rapuano; U. Villano

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Performance of ECM controlled VAV fan powered terminal units  

E-Print Network (OSTI)

2006). The airflow and power consumption performance models had an R2 equal to 0.990 or greater for every terminal unit tested. An air leakage model was employed to account for leakage in the parallel designed VAV terminal units when the internal fan...

Cramlet, Andrew Charles

2009-05-15T23:59:59.000Z

62

BETWEEN UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION  

NLE Websites -- All DOE Office Websites (Extended Search)

12-SLC-0663 12-SLC-0663 CONTRACT NO. 12-SLC-0663 BETWEEN UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION COLORADO RIVER STORAGE PROJECT MANAGEMENT CENTER AND SHELL ENERGY NORTH AMERICA FOR PURCHASE OF POWER Contract No. 12-SLC-0663 1 TABLE OF CONTENTS Section Title Page No. 1 Preamble ............................................................................................................... 2 2 Explanatory Recitals ............................................................................................ 2 3 Agreement ............................................................................................................. 3 4 Term of Contract .................................................................................................. 3

63

Turbine layout for and optimization of solar chimney power conversion units.  

E-Print Network (OSTI)

??ENGLISH ABSTRACT: The power conversion unit of a large solar chimney power plant converts the fluid power, first into mechanical power, and then into electrical… (more)

Fluri, Thomas Peter

2008-01-01T23:59:59.000Z

64

Integrated power unit control apparatus and method  

SciTech Connect

This patent describes control apparatus for a dual mode turbine engine, the turbine engine including a dynamic compressor supplying pressurized air to a combustor of the engine, and a storage source of pressurized air selectively flowing to the combustor via an air control valve; the control apparatus. It comprises: air flow control means receiving a signal CIP indicative of the pressure level of pressurized air at the combustor and in response thereto providing to the air control valve/a command signal Air/Fuel COMM indicative of a mass flow rate of air to be provided to the combustor from the storage source; and fuel control means receiving the Air/Fuel COMM signal and in response thereto providing a signal W{sub F} indicative of the weight of fuel per unit time to be provided to the combustor.

Klaass, R.M.; Minshall, B.J.; Suriano, F.J.; Caan, W.

1992-03-24T23:59:59.000Z

65

United Power - Energy Efficiency Rebate Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency Rebate Program Energy Efficiency Rebate Program United Power - Energy Efficiency Rebate Program < Back Eligibility Commercial Industrial Residential Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Heat Pumps Manufacturing Water Heating Program Info State Colorado Program Type Utility Rebate Program Rebate Amount Geothermal Heat Pump: $2,500 + $150/ton TSGT rebate* Air-Source Heat Pumps: $400 + $125-150/ton TSGT rebate Terminal Units: $235 Energy Star Heat Pump Bonus: $100 - $150 Electric Water Heater: $70 - $650, depending on conditions and features Electric Resistive Heat Units: $350/unit Electric Thermal Storage Units: $350/unit + $16/kW TSGT rebate Energy Star Appliances Refrigerator/Freezer: $40 Refrigerator/Freezer Recycling: $75

66

Solid Oxide Fuel Cell Diesel Auxiliary Power Unit Demonstration - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

9 9 FY 2012 Annual Progress Report DOE Hydrogen and Fuel Cells Program Dan Hennessy (Primary Contact), Jim Banna Delphi Automotive Systems, LLC 300 University Drive m/c 480-300-385 Auburn Hills, MI 48326 Phone: (248) 732-0656 Email: daniel.t.hennessy@delphi.com DOE Managers HQ: Dimitrios Papageorgopoulos Phone: (202) 586-5463 Email: Dimitrios.Papageorgopoulos@ee.doe.gov GO: David Peterson Phone: (720) 356-1747 Email: David.Peterson@go.doe.gov Contract Number: DE-EE0000478 Subcontractors: * Electricore, Inc., Valencia, CA * PACCAR, Inc., Bellevue, WA * TDA Research, Inc., Wheat Ridge, CO Project Start Date: August 1, 2009 Project End Date: April 30, 2013 Objectives

67

Potential Benefits of Utilizing Fuel Cell Auxiliary Power Units in Lieu of Heavy-Duty Truck Engine Idling  

E-Print Network (OSTI)

Cost Estimates for Polymer Electrolyte Membrane (PEM) Fuel Cellsmanufacturing costs of automotive PEM fuel cell systems incosts of different sizes of direct-hydrogen PEM fuel cell

2001-01-01T23:59:59.000Z

68

E-Print Network 3.0 - auxiliary field method Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Gas Power for CCS Energy Needs in Retrofitted Coal Power... for solvent regeneration and CO2 compression. This study finds that using an auxiliary natural gas turbine Source:...

69

A modified unit decommitment algorithm in combined heat and power production planning  

Science Journals Connector (OSTI)

This paper addresses the unit commitment in multi-period combined heat and power (CHP) production planning, considering the possibility to trade power on the spot market. We present a modified unit decommitment algorithm (MUD) that starts with a good ... Keywords: combined heat and power production, deregulated power market, energy optimization, modelling, modified unit decommitment, unit commitment

Aiying Rong; Risto Lahdelma

2007-01-01T23:59:59.000Z

70

Evaluation of performance of combined heat and power systems with dual power generation units (D-CHP).  

E-Print Network (OSTI)

?? In this research, a new combined heat and power (CHP) system configuration has been proposed that uses two power generation units (PGU) operating simultaneously… (more)

Knizley, Alta Alyce

2013-01-01T23:59:59.000Z

71

E-Print Network 3.0 - auxiliary systems Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

service units... , Auxiliary Services supports the University's mission and ... Source: Minnesota, University of - Laboratory for Advanced Research in Computing Technology and...

72

Uyghur Auxiliary Verbs  

E-Print Network (OSTI)

auxiliaries 72 3.3.1 Duration 7 3.3.2 Completion 3.3.3 Initiation 3.4 Summary of Chapter 3 79 4 Lexical verbs with functions similar to Aux 80 4.1 Benefactive b?r- 80 4.1.1 Adds theta role... 4.1.2 Structurally lower than all Aux 4.1.3 B?r- and negation 4.1.4 Semantically transparent 4.2 Ba?la- as initiation 87 5 Conclusion 89 Appendix A: Abbreviations and associated suffixes 75...

Bridges, Michelle

2008-07-31T23:59:59.000Z

73

The Salton Sea 10 MWe power plant, unit 1  

SciTech Connect

The Southern California Edison Company's Salton Sea Geothermal Electric Project is the second of two flashsteam projects located in the Imperial Valley of California to successfully demonstrate the feasibility of utilizing steam from highly saline geothermal fluids for electric power generation. The objective of Edison's Power Plant Unit 1 program at the Salton Sea KGRA is to develop design, operating, and economic criteria for commercial geothermal developments in the Imperial Valley of California. The Edison plant is designed specifically for utilization of geothermal steam and employs principles found in conventional fossil-fueled electric generating plants. This plant serves as a model of a full scale commercial plant, using systems and components which likely will be utilized in large scale follow-on units.

Moss, W.E.; Whitescarver, O.D.; Yamasaki, R.N.

1982-10-01T23:59:59.000Z

74

Thermoelectric Conversion of Waste Heat to Electricity in an IC Engine Powered Vehicle  

Energy.gov (U.S. Department of Energy (DOE))

Describes TEG systems built at MSU to mitigate couple failures and a cost-benefit analysis for a system used as an energy recovery system ? auxiliary power unit in an over-the-road truck system.

75

First results from operation of the Adler thermal power station equipped with two PGU-180 combined-cycle power units  

Science Journals Connector (OSTI)

We present technical characteristics of the equipment used in the PGU-180 power units of the Adler thermal power station (a branch of OGK-2) commissioned in November 2012 after the entire power plant had succe...

Yu. A. Radin; S. N. Lenev; O. N. Nikandrov; D. V. Rudenko

2013-09-01T23:59:59.000Z

76

Viability of an expanded United States nuclear power program and its effects on energy markets .  

E-Print Network (OSTI)

??The four biggest energy sources in the United States are coal, crude oil, natural gas, and nuclear power. While coal and nuclear power are produced… (more)

Khan, Tanzeer S

2006-01-01T23:59:59.000Z

77

MAN B&W`s latest HFO marine auxiliary engine  

SciTech Connect

The ability to operate marine auxiliary generator sets on heavy fuel oil (HFO) provides the advantages of using a single fuel source onboard ships for all engine power, but also requires attention directed to engine maintenance, reliability and emissions. MAN B&W Diesel in Holeby, Denmark, has a world reputation and substantial market share for HFO burning auxiliary engines above 500 kW. Offering a guaranteed 20000 operating hours before major overhaul on its HFO auxiliary gen-sets, the company has promoted the unifuel concept for ship propulsion and auxiliary power plants for many years. Based on this experience, a new generation of small HFO burning diesels has been designed. Low operating and maintenance costs, low initial cost, heavy fuel capabilities with unrestricted load profile, high reliability at long maintenance intervals and low emmisions were the main design targets. The design, specifications, and performance of these engines are discussed in this article.

Kunberger, K.

1996-09-01T23:59:59.000Z

78

Producer gas from citrus wood fuels irrigation power unit  

SciTech Connect

A 90-hp diesel engine operating a citrus irrigation system was converted to run on a dual-fuel mixture utilizing producer gas from citrus wood chips as the main fuel source. A chip feeder mechanism, gasifier, filter system and control unit were designed to meet typical irrigation power requirements. Blighted, unproductive and dead trees removed near the irrigation site were used for chipping. Data on chip moisture content, fuel analysis, drying rate and fuel/tree weight are presented but labour and equipment costs were not determined. 14 references.

Churchill, D.B.; Hedden, S.L.; Whitney, J.D.; Shaw, L.N.

1985-01-01T23:59:59.000Z

79

Wind Power Development in the United States: Current Progress, Future Trends  

E-Print Network (OSTI)

Annual Report on U.S. Wind Power Installation, Cost, andWind Power Development in the United States: Current94720 Abstract: The U.S. wind power industry is in an era of

Wiser, Ryan H

2009-01-01T23:59:59.000Z

80

Modeling of Electronically Commutated Motor Controlled Fan-powered Terminal Units  

E-Print Network (OSTI)

Feet Per Minute ECM Electronically Commutated Motor FPTU Fan Powered Terminal Unit Pdown Downstream Static Pressure PF Power Factor Pup Upstream Static Pressure SCR Silicon Controlled Rectifier THD Total Harmonic Distortion VAV Variable Air... parallel unit pressurizes the FPTU causing some of the primary air to leak out of the unit. Another difference between them is that series terminal units allow the primary air system to operate at a lower static pressure because the terminal unit fan...

Edmondson, Jacob Lee

2011-02-22T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

United Power - Business Energy Efficiency Rebate Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Business Energy Efficiency Rebate Program Business Energy Efficiency Rebate Program United Power - Business Energy Efficiency Rebate Program < Back Eligibility Commercial Industrial Savings Category Appliances & Electronics Commercial Lighting Lighting Manufacturing Maximum Rebate Lighting System Replacement: $20,000 per project LED Street/Area Lighting: $20,000 per project Refrigerated Case Lighting: $3,000 per project Program Info State Colorado Program Type Utility Rebate Program Rebate Amount Lighting System Replacement: $250 per kW calculated, or 50% of invoiced equipment costs Refrigerated Case Lighting (Reach In): $60 per door Refrigerated Case Lighting (Top Lighting Multi-Deck): $10 per lineal foot LED Street/Area Lighting: Lesser of 25% of head costs or $200 per head Electric Motor: $2/HP + $8/HP from Tri-State

82

Waste Heat Powered Ammonia Absorption Refrigeration Unit for LPG Recovery  

SciTech Connect

An emerging DOE-sponsored technology has been deployed. The technology recovers light ends from a catalytic reformer plant using waste heat powered ammonia absorption refrigeration. It is deployed at the 17,000 bpd Bloomfield, New Mexico refinery of Western Refining Company. The technology recovers approximately 50,000 barrels per year of liquefied petroleum gas that was formerly being flared. The elimination of the flare also reduces CO2 emissions by 17,000 tons per year, plus tons per year reductions in NOx, CO, and VOCs. The waste heat is supplied directly to the absorption unit from the Unifiner effluent. The added cooling of that stream relieves a bottleneck formerly present due to restricted availability of cooling water. The 350oF Unifiner effluent is cooled to 260oF. The catalytic reformer vent gas is directly chilled to minus 25oF, and the FCC column overhead reflux is chilled by 25oF glycol. Notwithstanding a substantial cost overrun and schedule slippage, this project can now be considered a success: it is both profitable and highly beneficial to the environment. The capabilities of directly-integrated waste-heat powered ammonia absorption refrigeration and their benefits to the refining industry have been demonstrated.

Donald C, Energy Concepts Co.; Lauber, Eric, Western Refining Co.

2008-06-20T23:59:59.000Z

83

Backgrounder: Geothermal resource production, steam gathering, and power generation at Salton Sea Unit 3, Calipatria, California  

SciTech Connect

The 10,000-kilowatt Salton Sea Unit 1 power plant was designed to demonstrate that electrical power generation, using the highly saline brines from the Salton Sea geothermal reservoir, was technically and economically feasible. Unit 1, owned by Earth Energy, a Unocal subsidiary, began operating in 1982, initiating an intensive testing program which established the design criteria necessary to construct the larger 47,500-kilowatt Unit 3 power plant, unit 3 contains many of the proprietary or patented technological innovations developed during this program. Design, construction and start-up of the Unit 3 power generating facility began in December, 1986, and was completed in 26 months. By the end of 1988, the brine handling system was in full operation, and the turbine had been tested at design speed. Desert Power Company, a Unocal subsidiary, owns the power generating facility. Unocal owns the brine resource production facility. Power is transmitted by the Imperial Irrigation District to Southern California Edison Company.

None

1989-04-01T23:59:59.000Z

84

Home Energy Score API User: United Illuminating Company and Connecticut Light and Power  

Energy.gov (U.S. Department of Energy (DOE))

The United Illuminating Company and Connecticut Light and Power, administering conservation, and load management programs funded by the Connecticut Energy Efficiency Fund, are Home Energy Score...

85

Improving the liquid-cooling systems of power units and technological equipment  

Science Journals Connector (OSTI)

Processes in the liquid cooling systems of power units and technological equipment are considered. Criteria ... of the energy and resource aspects of the cooling systems.

V. A. Zhukov

2011-12-01T23:59:59.000Z

86

Green Power Marketing in the United States: A Status Report (11th Edition)  

Energy.gov (U.S. Department of Energy (DOE))

This report documents green power marketing activities and trends in the United States, focusing on consumer decisions to purchase electricity supplied from renewable energy sources.

87

A study of the operating conditions and power performance characteristics of power units upon increasing the cooling capacity of their chimney-type cooling towers  

Science Journals Connector (OSTI)

The operating conditions and power performance characteristics of the Armenian nuclear power station’s Unit 2 equipped with a ... 4.3 turbine and of the Razdan district power station’s units equipped with K-200- ...

A. K. Muradyan; D. T. Arshakyan

2007-11-01T23:59:59.000Z

88

Wind Power Price Trends in the United States  

E-Print Network (OSTI)

should eventually help wind power regain the downward priceModern Energy Review] Wind Power Price Trends in the Unitedled the world in adding new wind power capacity in 2008, and

Bolinger, Mark

2010-01-01T23:59:59.000Z

89

Factors driving wind power development in the United States  

E-Print Network (OSTI)

about 1.3 MW of Iowa wind power to supply its Second Natureuse a portion of the wind power to supply customers whosupplies wholesale wind power to four Colorado utilities,

Bird, Lori A.; Parsons, Brian; Gagliano, Troy; Brown, Matthew H.; Wiser, Ryan H.; Bolinger, Mark

2003-01-01T23:59:59.000Z

90

Modeling of ECM Controlled Series Fan-powered VAV Terminal Units  

E-Print Network (OSTI)

Semi-empirical models for series fan-powered variable air volume terminal units (FPTUs) were developed based on models of the primary, plenum, fan airflow and the fan power consumption. The experimental setups and test procedures were developed...

Yin, Peng

2011-10-21T23:59:59.000Z

91

Viability of an expanded United States nuclear power program and its effects on energy markets  

E-Print Network (OSTI)

The four biggest energy sources in the United States are coal, crude oil, natural gas, and nuclear power. While coal and nuclear power are produced domestically, more than 70% of crude oil and 20% of natural gas is imported. ...

Khan, Tanzeer S

2006-01-01T23:59:59.000Z

92

Use of combined-cycle power units at cogeneration plants  

Science Journals Connector (OSTI)

Indices of reconstructed and new cogeneration plants (CPs) using combined cycle units (CCPUs) are considered. The conclusions...

V. M. Batenin; Yu. A. Zeigarnik; V. M. Maslennikov; Yu. L. Shekhter…

2008-12-01T23:59:59.000Z

93

Impact of High Wind Power Penetration on Hydroelectric Unit Operations  

SciTech Connect

The Western Wind and Solar Integration Study (WWSIS) investigated the operational impacts of very high levels of variable generation penetration rates (up to 35% by energy) in the western United States. This work examines the impact of this large amount of wind penetration on hydroelectric unit operations. Changes in hydroelectric unit operating unit patterns are examined for an aggregation of all hydro generators. The cost impacts of maintaining hydro unit flexibility are assessed and compared for a number of different modes of system operation.

Hodge, B. M.; Lew, D.; Milligan, M.

2011-01-01T23:59:59.000Z

94

Veterinary Report Fall 2004 Auxiliary Presents Scholarships  

E-Print Network (OSTI)

, and Chris Fairbrother, as well as Patty Herath, Auxiliary President. Also on October 14, the Auxiliary Fairbrother and Lois Meerdink organized the event. The 2005 Alumni Association board members took office

Gilbert, Matthew

95

Factors driving wind power development in the United States  

E-Print Network (OSTI)

presented at AWEA Windpower 2001 Conference, Washington,IN THE UNITED STATES WINDPOWER 2003 CONFERENCE WEDNESDAY,a portion to supply its Windpower green pricing program. The

Bird, Lori A.; Parsons, Brian; Gagliano, Troy; Brown, Matthew H.; Wiser, Ryan H.; Bolinger, Mark

2003-01-01T23:59:59.000Z

96

Efficiency of producing additional power in units of nuclear power stations containing water-cooled-water-moderated reactors  

Science Journals Connector (OSTI)

There is a basic possibility to raise the maximum power of a unit containing the VVÉR-1000 reactor in the course of the fuel charge burn-up and with lowering the coefficient of the energy-release nonuniformity...

R. Z. Aminov; V. A. Khrustalev; A. A. Serdobintsev…

1986-12-01T23:59:59.000Z

97

Water chemistry of the system for cooling the electrical generator’ stator of the power unit at a thermal power station  

Science Journals Connector (OSTI)

Results from studies of the water chemistry used in the system for cooling the stator windings of alternators used in supercritical-pressure power units are presented, and a solution is ... suggested using which ...

B. M. Larin; A. B. Larin; A. N. Korotkov; M. Yu. Oparin

2011-07-01T23:59:59.000Z

98

Green Power Marketing in the United States: A Status Report (Tenth Edition)  

SciTech Connect

This report documents green power marketing activities and trends in the United States, focusing on consumer decisions to purchase electricity supplied from renewable energy sources and how this choice represents a powerful market support mechanism for renewable energy development. The report presents aggregate green power sales data for all voluntary purchase markets across the United States. It also provides summary data on utility green pricing programs offered in regulated electricity markets, on green power marketing activity in competitive electricity markets, and green power sold to voluntary purchasers in the form of renewable energy certificates. It also includes a discussion of key market trends and issues.

Bird, L.; Dagher, L.; Swezey, B.

2007-12-01T23:59:59.000Z

99

United States Government Department of Energy Bonneville Power...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Counties, WA; and Nez Perce County, ID Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA is proposing to install two sections of new...

100

Damodar Valley Corporation, Chandrapura Unit 2 Thermal Power Station Residual Life Assessment Summary report  

SciTech Connect

The BHEL/NTPC/PFC/TVA teams assembled at the DVC`s Chadrapura station on July 19, 1994, to assess the remaining life of Unit 2. The workscope was expanded to include major plant systems that impact the unit`s ability to sustain generation at 140 MW (Units 1-3 have operated at average rating of about 90 MW). Assessment was completed Aug. 19, 1994. Boiler pressure parts are in excellent condition except for damage to primary superheater header/stub tubes and economizer inlet header stub tubes. The turbine steam path is in good condition except for damage to LP blading; the spar rotor steam path is in better condition and is recommended for Unit 2. Nozzle box struts are severely cracked from the flame outs; the cracks should not be repaired. HP/IP rotor has surface cracks at several places along the steam seal areas; these cracks are shallow and should be machined out. Detailed component damage assessments for above damaged components have been done. The turbine auxiliary systems have been evaluated; cooling tower fouling/blockage is the root cause for the high turbine back pressure. The fuel processing system is one of the primary root causes for limiting unit capacity. The main steam and hot reheat piping systems were conservatively designed and have at least 30 years left;deficiencies needing resolution include restoration of insulation, replacement of 6 deformed hanger clamp/bolts, and adjustment of a few hanger settings. The cold reheat piping system is generally in good condition; some areas should be re-insulated and the rigid support clamps/bolts should be examined. The turbine extraction piping system supports all appeared to be functioning normally.

NONE

1995-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Optimal control system design of an acid gas removal unit for an IGCC power plants with CO2 capture  

SciTech Connect

Future IGCC plants with CO{sub 2} capture should be operated optimally in the face of disturbances without violating operational and environmental constraints. To achieve this goal, a systematic approach is taken in this work to design the control system of a selective, dual-stage Selexol-based acid gas removal (AGR) unit for a commercial-scale integrated gasification combined cycle (IGCC) power plant with pre-combustion CO{sub 2} capture. The control system design is performed in two stages with the objective of minimizing the auxiliary power while satisfying operational and environmental constraints in the presence of measured and unmeasured disturbances. In the first stage of the control system design, a top-down analysis is used to analyze degrees of freedom, define an operational objective, identify important disturbances and operational/environmental constraints, and select the control variables. With the degrees of freedom, the process is optimized with relation to the operational objective at nominal operation as well as under the disturbances identified. Operational and environmental constraints active at all operations are chosen as control variables. From the results of the optimization studies, self-optimizing control variables are identified for further examination. Several methods are explored in this work for the selection of these self-optimizing control variables. Modifications made to the existing methods will be discussed in this presentation. Due to the very large number of candidate sets available for control variables and due to the complexity of the underlying optimization problem, solution of this problem is computationally expensive. For reducing the computation time, parallel computing is performed using the Distributed Computing Server (DCS®) and the Parallel Computing® toolbox from Mathworks®. The second stage is a bottom-up design of the control layers used for the operation of the process. First, the regulatory control layer is designed followed by the supervisory control layer. Finally, an optimization layer is designed. In this paper, the proposed two-stage control system design approach is applied to the AGR unit for an IGCC power plant with CO{sub 2} capture. Aspen Plus Dynamics® is used to develop the dynamic AGR process model while MATLAB is used to perform the control system design and for implementation of model predictive control (MPC).

Jones, D.; Bhattacharyya, D.; Turton, R.; Zitney, S.

2012-01-01T23:59:59.000Z

102

The desulfurization of flue gas at the Mae Moh Power Plant Units 12 and 13  

SciTech Connect

As pollution of air, water and ground increasingly raises worldwide concern, the responsible national and international authorities establish and issue stringent regulations in order to maintain an acceptable air quality in the environment. In Thailand, the Electricity Generating Authority of Thailand (EGAT) takes full responsibility in environmental protection matters as well as in generating the electricity needed to supply the country`s very rapid power demand growth. Due to the rapidly increasing electricity demand of the country, EGAT had decided to install two further lignite-fired units of 300 MW each (Units 12 and 13) at the Mae Moh power generation station and they are now under construction. The arrangement and the capacity of all the power plant units are as shown. In 1989, EGAT started the work on the flue gas desulfurization system of Mae Moh power plant units 12 and 13 as planned. A study has been conducted to select the most suitable and most economical process for flue gas desulfurization. The wet scrubbing limestone process was finally selected for the two new units. Local limestone will be utilized in the process, producing a by-product of gypsum. Unfortunately, natural gypsum is found in abundance in Thailand, so the produced gypsum will be treated as landfill by mixing it with ash from the boilers of the power plants and then carrying it to the ash dumping area. The water from the waste ash water lake is utilized in the process as much as possible to minimize the requirement of service water, which is a limited resource. The Mae Moh power generation station is situated in the northern region of Thailand, 600 km north of Bangkok and about 30 km east of the town of Lampang, close to the Mae Moh lignite mine. Three lignite-fired units (Units 1-3) of 75 MW each, four units (Units 4-7) of 150 MW each and four units (Units 8-11) of 300 MW each are in operation.

Haemapun, C.

1993-12-31T23:59:59.000Z

103

Application of CFB technology for large power generating units and CO{sub 2} capture  

SciTech Connect

Data on the development of the circulating fluidized bed (CFB) technology for combustion of fuels in large power generating units are examined. The problems with raising the steam parameters and unit power of boilers with a circulating fluidized bed are examined. With the boiler system at the 460 MW unit at Lagisza (Poland) as an example, the feasibility of raising the efficiency of units with CFB boilers through deep recovery of the heat of the effluent gases and reducing expenditure for in-house needs is demonstrated. Comparative estimates of the capital and operating costs of 225 and 330 MW units are used to determine the conditions for optimum use of CFB boilers in the engineering renovation of thermal power plants in Russia. New areas for the application of CFB technology in CO{sub 2} capture are analyzed in connection with the problem of reducing greenhouse gas emissions.

Ryabov, G. A., E-mail: georgy.ryabov@gmail.com; Folomeev, O. M.; Sankin, D. A.; Khaneev, K. V.; Bondarenko, I. G.; Mel'nikov, D. A. [JSC 'All-Russian Thermotechnical Institute' ('VTI') (Russian Federation)

2010-07-15T23:59:59.000Z

104

The future of nuclear power in the United States : economic and regulatory challenges  

E-Print Network (OSTI)

This paper examines the economic and regulatory challenges that must be faced by potential investors in new nuclear power plants in the United States. The historical development of the existing fleet of over 100 nuclear ...

Joskow, Paul L.

2006-01-01T23:59:59.000Z

105

Market Power in Emissions Trading Markets Ruled by a Multiple Unit Double Auction: Further Experimental Evidence  

Science Journals Connector (OSTI)

We discuss selected methodological problems of previous Double Auction (DA) experiments and test the hypothesis that a Multiple Unit Double Auction (MUDA) is able to prevent market power in an emissions trading m...

Bodo Sturm

2008-08-01T23:59:59.000Z

106

Development of a full-scale training simulator for an 800-MW power unit  

Science Journals Connector (OSTI)

Stages of work involving preparation of requirements specification, development, and subsequent implementation of a project for constructing a full-scale training simulator of an 800-MW power unit are consider...

S. K. Zhuravlev; A. M. Andreev

2013-07-01T23:59:59.000Z

107

An Assessment of Energy Potential at Non-Powered Dams in the United States  

Energy.gov (U.S. Department of Energy (DOE))

An Assessment of Energy Potential at Non-Powered Dams in the United States- The United States has produced clean, renewable electricity from hydropower for more than 100 years, but hydropower producing facilities represent only a fraction of the infrastructure development that has taken place on the nation’s waterways.

108

PRIMAL AND DUAL METHODS FOR UNIT COMMITMENT IN A HYDRO-THERMAL POWER SYSTEM  

E-Print Network (OSTI)

comprising thermal and pumped-storage hydro units a large-scale mixed-integer optimization model is developed of big coal red blocks with several pumped storage plants of di ering e ciencies provides the mainPRIMAL AND DUAL METHODS FOR UNIT COMMITMENT IN A HYDRO-THERMAL POWER SYSTEM R. Gollmer1 , A. Moller

Römisch, Werner

109

DOE Releases Comprehensive Report on Offshore Wind Power in the United  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Comprehensive Report on Offshore Wind Power in the Comprehensive Report on Offshore Wind Power in the United States DOE Releases Comprehensive Report on Offshore Wind Power in the United States October 7, 2010 - 12:00am Addthis Washington, D.C. - U.S. Energy Secretary Steven Chu announced today the release of a report from the Department of Energy's National Renewable Energy Laboratory (NREL), which comprehensively analyzes the key factors impacting the deployment of offshore wind power in the U.S. The report, "Large-Scale Offshore Wind Power in the United States: Assessment of Opportunities and Barriers," includes a detailed assessment of the Nation's offshore wind resources and offshore wind industry, including future job growth potential. The report also analyzes the technology challenges, economics, permitting procedures, and the potential risks and benefits of

110

DOE Releases Comprehensive Report on Offshore Wind Power in the United  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Releases Comprehensive Report on Offshore Wind Power in the DOE Releases Comprehensive Report on Offshore Wind Power in the United States DOE Releases Comprehensive Report on Offshore Wind Power in the United States October 7, 2010 - 12:00am Addthis Washington, D.C. - U.S. Energy Secretary Steven Chu announced today the release of a report from the Department of Energy's National Renewable Energy Laboratory (NREL), which comprehensively analyzes the key factors impacting the deployment of offshore wind power in the U.S. The report, "Large-Scale Offshore Wind Power in the United States: Assessment of Opportunities and Barriers," includes a detailed assessment of the Nation's offshore wind resources and offshore wind industry, including future job growth potential. The report also analyzes the technology challenges,

111

Oil market power and United States national security  

Science Journals Connector (OSTI)

...assuming cOPEC demand growth of 2% (2004 cOPEC demand is unavailable...that importer demand reduction might...power, not oil per se, creates...military spending per capita (38). Iran's...However, Iran's energy consumption equals...domestic product (GDP) (39...

Roger Stern

2006-01-01T23:59:59.000Z

112

Motion Charged Battery as Sustainable Flexible-Power-Unit  

Science Journals Connector (OSTI)

Energy harvesting and storage are the two most important energy technologies developed for portable, sustainable, and self-sufficient power sources for mobile electronic systems. ... The c.d. >12 mA/cm2 and exceptional stability (sustaining ?5 million turnover without decompn.), ...

Sihong Wang; Zong-Hong Lin; Simiao Niu; Long Lin; Yannan Xie; Ken C. Pradel; Zhong Lin Wang

2013-11-23T23:59:59.000Z

113

NETL: News Release - Solid Oxide Fuel Cell Successfully Powers Truck Cab  

NLE Websites -- All DOE Office Websites (Extended Search)

9, 2009 9, 2009 Solid Oxide Fuel Cell Successfully Powers Truck Cab and Sleeper in DOE-Sponsored Test DOE, Delphi, Peterbilt Join to Test Auxiliary Power Unit for Commercial Trucks Washington, DC -In a test sponsored by the U.S. Department of Energy (DOE), a Delphi auxiliary power unit employing a solid oxide fuel cell (SOFC) successfully operated the electrical system and air conditioning of a Peterbilt Model 386 truck under conditions simulating idling conditions for 10 hours. The device provides an alternative to running a truck's main diesel engine, or using a truck's batteries, to power auxiliary electrical loads during rest periods, thereby lowering emissions, reducing noise, and saving fuel. Solid Oxide Fuel Cell Successfully Powers Truck Cab and Sleeper in DOE-Sponsored Test

114

AEO2011: Electric Power Projections for EMM Region - United States | OpenEI  

Open Energy Info (EERE)

United States United States Dataset Summary Description This dataset comes from the Energy Information Administration (EIA), and is part of the 2011 Annual Energy Outlook Report (AEO2011). This dataset is table 95, and contains only the reference case. The data is broken down into electric power sector, cumulative planned additions,cumulative unplanned additions,cumulative retirements, end-use sector, electricity sales, net energy for load, generation by fuel type and price by service category. Source EIA Date Released April 26th, 2011 (3 years ago) Date Updated Unknown Keywords 2011 AEO EIA Electric Power projections United States Data application/vnd.ms-excel icon AEO2011: Electric Power Projections for EMM Region - United States- Reference Case (xls, 260.9 KiB) Quality Metrics

115

Wind Power Price Trends in the United States: Struggling to Remain Competitive in the Face of Strong Growth  

E-Print Network (OSTI)

Build a Durable Market for Wind Power in the United States”crisis on the U.S. wind power market. A sizable literaturethe recent run-up in wind power costs and pricing. Moreover,

Bolinger, Mark A

2009-01-01T23:59:59.000Z

116

Wind Power Price Trends in the United States: Struggling to Remain Competitive in the Face of Strong Growth  

E-Print Network (OSTI)

Build a Durable Market for Wind Power in the United States”Annual Report on U.S. Wind Power Installation, Cost, andcrisis on the U.S. wind power market. A sizable literature

Bolinger, Mark A

2009-01-01T23:59:59.000Z

117

The Future Potential of Waver Power in the United States  

SciTech Connect

The theoretical ocean wave energy resource potential exceeds 50% of the annual domestic energy demand of the United States, is located close to coastal population centers, and, although variable in nature, may be more consistent and predictable than some other renewable generation technologies. As a renewable electricity generation technology, ocean wave energy offers a low air pollutant option for diversifying the U.S. electricity generation portfolio. Furthermore, the output characteristics of these technologies may complement other renewable technologies. This study addresses the following: (1) The theoretical, technical and practical potential for electricity generation from wave energy (2) The present lifecycle cost profile (Capex, Opex, and Cost of Electricity) of wave energy conversion technology at a reference site in Northern California at different plant scales (3) Cost of electricity variations as a function of deployment site, considering technical, geo-spatial and and electric grid constraints (4) Technology cost reduction pathways (5) Cost reduction targets at which the technology will see significant deployment within US markets, explored through a series of deployment scenarios RE Vision Consulting, LLC (RE Vision), engaged in various analyses to establish current and future cost profiles for marine hydrokinetic (MHK) technologies, quantified the theoretical, technical and practical resource potential, performed electricity market assessments and developed deployment scenarios. RE Vision was supported in this effort by NREL analysts, who compiled resource information, performed analysis using the ReEDSa model to develop deployment scenarios, and developed a simplified assessment of the Alaska and Hawaii electricity markets.

Mirko Previsic; Jeff Epler; Maureen Hand; Donna Heimiller; Walter Short; Kelly Eurek

2012-09-20T23:59:59.000Z

118

A pilot application of risk-informed methods to establish inservice inspection priorities for nuclear components at Surry Unit 1 Nuclear Power Station. Revision 1  

SciTech Connect

As part of the Nondestructive Evaluation Reliability Program sponsored by the US Nuclear Regulatory Commission, the Pacific Northwest National Laboratory has developed risk-informed approaches for inservice inspection plans of nuclear power plants. This method uses probabilistic risk assessment (PRA) results to identify and prioritize the most risk-important components for inspection. The Surry Nuclear Power Station Unit 1 was selected for pilot application of this methodology. This report, which incorporates more recent plant-specific information and improved risk-informed methodology and tools, is Revision 1 of the earlier report (NUREG/CR-6181). The methodology discussed in the original report is no longer current and a preferred methodology is presented in this Revision. This report, NUREG/CR-6181, Rev. 1, therefore supersedes the earlier NUREG/CR-6181 published in August 1994. The specific systems addressed in this report are the auxiliary feedwater, the low-pressure injection, and the reactor coolant systems. The results provide a risk-informed ranking of components within these systems.

Vo, T.V.; Phan, H.K.; Gore, B.F.; Simonen, F.A.; Doctor, S.R. [Pacific Northwest National Lab., Richland, WA (United States)

1997-02-01T23:59:59.000Z

119

Green Power Marketing in the United States: A Status Report, Sixth Edition  

SciTech Connect

Voluntary consumer decisions to purchase electricity supplied from renewable energy sources represent a powerful market support mechanism for renewable energy development. Beginning in the early 1990s, a small number of U.S. utilities began offering''green power'' options to their customers. Since then, these products have become more prevalent both from utilities and in states that have introduced competition into their retail electricity markets. Today, nearly 50% of all U.S. consumers have an option to purchase some type of green power product from a retail electricity provider. Currently, more than 350 investor-owned utilities, rural electric cooperatives, and other publicly owned utilities in 33 states offer green power programs. This report provides an overview of green power marketing activity in the United States. It describes green power product offerings, consumer response, and recent industry trends. The three distinct markets for green power are discussed in turn.

Bird, L.; Swezey, B.

2003-10-01T23:59:59.000Z

120

A Roadmap to Deploy New Nuclear Power Plants in the United States by 2010:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A Roadmap to Deploy New Nuclear Power Plants in the United States A Roadmap to Deploy New Nuclear Power Plants in the United States by 2010: Volume II, Main Report A Roadmap to Deploy New Nuclear Power Plants in the United States by 2010: Volume II, Main Report The objective of this document is to provide the Department of Energy (DOE) and the nuclear industry with the basis for a plan to ensure the availability of near-term nuclear energy options that can be in operation in the U.S. by 2010. This document identifies the technological, regulatory, and institutional gaps and issues that need to be addressed for new nuclear plants to be deployed in the U.S. in this timeframe. It also identifies specific designs that could be deployed by 2010, along with the actions and resource requirements that are needed to ensure their

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

A Roadmap to Deploy New Nuclear Power Plants in the United States by 2010:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A Roadmap to Deploy New Nuclear Power Plants in the United States A Roadmap to Deploy New Nuclear Power Plants in the United States by 2010: Volume II, Main Report A Roadmap to Deploy New Nuclear Power Plants in the United States by 2010: Volume II, Main Report The objective of this document is to provide the Department of Energy (DOE) and the nuclear industry with the basis for a plan to ensure the availability of near-term nuclear energy options that can be in operation in the U.S. by 2010. This document identifies the technological, regulatory, and institutional gaps and issues that need to be addressed for new nuclear plants to be deployed in the U.S. in this timeframe. It also identifies specific designs that could be deployed by 2010, along with the actions and resource requirements that are needed to ensure their

122

Grid Impacts of Wind Power: A Summary of Recent Studies in the United States; Preprint  

SciTech Connect

Several detailed technical investigations of grid ancillary service impacts of wind power plants in the United States have recently been performed. These studies were applied to Xcel Energy (in Minnesota) and PacifiCorp and the Bonneville Power Administration (both in the northwestern United States). Although the approaches vary, three utility time frames appear to be most at issue: regulation, load following, and unit commitment. This paper describes and compares the analytic frameworks from recent analysis and discusses the implications and cost estimates of wind integration. The findings of these studies indicate that relatively large-scale wind generation will have an impact on power system operation and costs, but these impacts and costs are relatively low at penetration rates that are expected over the next several years.

Parsons, B.; Milligan, M.; Zavadil, B.; Brooks, D.; Kirby, B.; Dragoon, K.; Caldwell, J.

2003-06-01T23:59:59.000Z

123

Tri-State Generation and Transmission Association's Springverville unit 3 earns POWER's highest honor  

SciTech Connect

It is said that pioneers take the arrows. In the case of Springerville Unit 3 - a 418 MW(net) expansion of a Tucson Electric Power facility in Arizona and the first pulverized coal-fired units built in the US in more than decade, the arrows were many. Although Tri-State (the developer), Tuscon Electric (the host), and Bechtel Power (the EPC contractor) were wounded by delayed deliveries of major equipment, bankruptcy of a major supplier, and a labor shortage, the companies showed their pioneering spirit and completed the project ahead of schedule. For ushering in a new generation of clean and desperately needed baseload capacity, Springerville Unit 3 is POWER magazine's 2006 Plant of the Year. 9 figs.

Peltier, R.

2006-09-15T23:59:59.000Z

124

Clean, Efficient, and Reliable Power for the 21st Century  

E-Print Network (OSTI)

vehicles; and auxiliary power units and portable electronics--fuel cell applications hold potential to capture the sun, harness the wind, and utilize earth's natural geothermal energy. DOE also pursues clean energy solutions for transportation, like next- generation biofuels, advanced batteries for electric

125

Measurements of photon ionizing radiation fields in the reactor room of the 4th power-generating unit of the chernobyl nuclear power plant  

Science Journals Connector (OSTI)

A radiation examination of the reactor room of the damaged fourth unit of the Chernobyl nuclear power plant was performed. The most strongly radiating surfaces...

A. G. Volkovich; V. N. Potapov; S. V. Smirnov; L. I. Urutskoev…

2000-03-01T23:59:59.000Z

126

Hybrid mesons and auxiliary fields  

E-Print Network (OSTI)

Hybrid mesons are exotic mesons in which the color field is not in the ground state. Their understanding deserves interest from a theoretical point of view, because it is intimately related to nonperturbative aspects of QCD. Moreover, it seems that some recently detected particles, such as the $\\pi_1(1600)$ and the Y(4260), are serious hybrid candidates. In this work, we investigate the description of such exotic hadrons by applying the auxiliary fields technique to the widely used spinless Salpeter Hamiltonian with appropriate linear confinement. Instead of the usual numerical resolution, this technique allows to find simplified analytical mass spectra and wave functions of the Hamiltonian, which still lead to reliable qualitative predictions. We analyse and compare two different descriptions of hybrid mesons, namely a two-body $q\\bar q$ system with an excited flux tube, or a three-body $q\\bar q g$ system. We also compute the masses of the $1^{-+}$ hybrids. Our results are shown to be in satisfactory agreement with lattice QCD and other effective models.

Fabien Buisseret; Vincent Mathieu

2006-07-07T23:59:59.000Z

127

A close look at auxiliary problem principles for equilibria  

E-Print Network (OSTI)

Dec 1, 2014 ... of auxiliary EPs: the classical auxiliary problems, in which a regularizing term is ... to the equilibrium bifunction, and the regularized Minty EPs.

2014-12-01T23:59:59.000Z

128

Restoration of the graphite memory of a reactor in the third power-generating unit of the Leningrad nuclear power plant  

Science Journals Connector (OSTI)

The restoration of the graphite masonry of cell 52-16 in the reactor in the third power-generating unit of the Leningrad nuclear power plant is described. The process reduces to moving...

V. I. Lebedev; Yu. V. Garusov; M. A. Pavlov; A. N. Peunov; E. P. Kozlov

1999-11-01T23:59:59.000Z

129

Dominant-power politics and ‘virtual’ party hegemony: the role of United Russia in the Putin period.  

E-Print Network (OSTI)

??This case study examines the role of the political party United Russia in the rise of ‘dominant-power politics’, also termed ‘electoral authoritarianism’, that characterises the… (more)

Roberts, Sean

2010-01-01T23:59:59.000Z

130

PEV-based Reactive Power Compensation for Wind DG Units: A Stackelberg Game Approach  

E-Print Network (OSTI)

--There has been a growing interest recently towards integrating more renewable energy resources management solutions for renewable wind and solar energy integration. In addition to the need for constantly challenges to integrate these DG units. Above all, there exists no accurate long term wind power prediction

Huang, Jianwei

131

Land-Use Requirements of Modern Wind Power Plants in the United States  

NLE Websites -- All DOE Office Websites (Extended Search)

4 4 August 2009 Land-Use Requirements of Modern Wind Power Plants in the United States Paul Denholm, Maureen Hand, Maddalena Jackson, and Sean Ong National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Operated by the Alliance for Sustainable Energy, LLC Contract No. DE-AC36-08-GO28308 Technical Report NREL/TP-6A2-45834 August 2009 Land-Use Requirements of Modern Wind Power Plants in the United States Paul Denholm, Maureen Hand, Maddalena Jackson, and Sean Ong Prepared under Task No. WER9.3550 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government.

132

Study of Power Grid Connection with an Unstable Source from Elevator Energy Regenerative Unit (EERU)  

Science Journals Connector (OSTI)

Abstract This paper presents a study of power grid connection with an unstable source from elevator energy regenerative unit (EERU). The investigated system used a Permanent Magnet Synchronous Motor (PMSM). The EERU is installed for this system to generate electricity according to the generative mode of the elevator which delivers power to the grid as an unstable power source. To meet standard specifications in term of power quality and safety for grid connection, the phase angle and the amplitude as well as the frequency of the grid voltage are considered for grid connection. Phase lock loop (PLL) algorithm is therefore very important and selected for grid synchronization. The study is done by simulation using Matlab/Simulink program. The simulation used phase lock loop to synchronize between two systems. The results of this simulation will lead to a proper design of the grid connection with EERU as an unstable power source.

A. Noppakant; B. Plangklang; Y. Paraken

2014-01-01T23:59:59.000Z

133

Impact of High Wind Power Penetrations on Hydroelectric Unit Operations in the WWSIS  

NLE Websites -- All DOE Office Websites (Extended Search)

High Wind Power High Wind Power Penetrations on Hydroelectric Unit Operations in the WWSIS Bri-Mathias Hodge, Debra Lew, and Michael Milligan Technical Report NREL/TP-5500-52251 July 2011 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 The Impact of High Wind Power Penetrations on Hydroelectric Unit Operations in the WWSIS Bri-Mathias Hodge, Debra Lew, and Michael Milligan Prepared under Task No. WE110810 Technical Report NREL/TP-5500-52251 July 2011 NOTICE

134

Green Power Marketing in the United States: A Status Report (2009 Data)  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Power Marketing in the Green Power Marketing in the United States: A Status Report (2009 Data) Lori Bird and Jenny Sumner Technical Report NREL/TP-6A20-49403 September 2010 ERRATA SHEET NREL REPORT/PROJECT NUMBER: TP-6A20-49403 TITLE: Green Power Marketing in the United States: A Status Report (2009 Data) AUTHOR(S): Lori Bird, Jenny Sumner ORIGINAL PUBLICATION DATE: September 2010 DATE OF CORRECTIONS: April 2011 The following corrections were made to this report: On page 36, reference to 2010 vintage WECC wind was removed. In Table 18, data on 2010 vintage WECC wind was removed. NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory

135

Unit commitment with wind power generation: integrating wind forecast uncertainty and stochastic programming.  

SciTech Connect

We present a computational framework for integrating the state-of-the-art Weather Research and Forecasting (WRF) model in stochastic unit commitment/energy dispatch formulations that account for wind power uncertainty. We first enhance the WRF model with adjoint sensitivity analysis capabilities and a sampling technique implemented in a distributed-memory parallel computing architecture. We use these capabilities through an ensemble approach to model the uncertainty of the forecast errors. The wind power realizations are exploited through a closed-loop stochastic unit commitment/energy dispatch formulation. We discuss computational issues arising in the implementation of the framework. In addition, we validate the framework using real wind speed data obtained from a set of meteorological stations. We also build a simulated power system to demonstrate the developments.

Constantinescu, E. M.; Zavala, V. M.; Rocklin, M.; Lee, S.; Anitescu, M. (Mathematics and Computer Science); (Univ. of Chicago); (New York Univ.)

2009-10-09T23:59:59.000Z

136

Experience in operating and upgrading the No. 5 unit of the Novovoronezh nuclear power plant – practical base for developing a reliable source of nuclear energy  

Science Journals Connector (OSTI)

The No. 5 unit of the Novovoronezh nuclear power plant, starting commercial operations on September 26, 1980, is the first power-generating unit with a 1000 MW VVER in our country. The assimilation of its power g...

I. L. Vitkovskii

2011-03-01T23:59:59.000Z

137

Design of Micro-grid System Based on Renewable Power Generation Units  

E-Print Network (OSTI)

Abstract- Micro-grid system is currently a conceptual solution to fulfill the commitment of reliable power delivery for future power systems. Renewable power sources such as wind and hydro offer the best potential for emission free power for future micro-grid systems. This paper presents a micro-grid system based on wind and hydro power sources and addresses issues related to operation, control, and stability of the system. The micro-grid system investigated in this paper represents a case study in Newfoundland, Canada. It consists of a small hydro generation unit and a wind farm that contains nine variable- speed, double-fed induction generator based wind turbines. Using Matlab/Simulink, the system is modeled and simulated to identify the technical issues involved in the operation of a micro-grid system based on renewable power generation units. The operational modes, technical challenges and a brief outline of conceptual approaches to addressing some of the technical issues are presented for further investigation.

Dr. K. Ravich; M. Manasa; Mr. P. Yohan Babu; G. V. P. Anjaneyulu

138

Tracy Power Station -- Unit No. 4, Pinon Pine Power Project Public Design Report  

SciTech Connect

This Public Design Report describes the Pinon Pine Project which will be located at the Sierra Pacific Power Company`s (SPPCO) Tracy Station near Reno, Nevada. The integrated gasification combined-cycle (IGCC) plant is designed to process 880 tones per day (TPD) of bituminous coal producing approximately 107 gross megawatts of electric power (MWe). This project is receiving cost-sharing from the US Department of Energy (DOE) in accordance with DOE Cooperative Agreement DE-FC2192MC29309. The plant incorporates the Kellogg-Rust-Westinghouse (KRW) fluidized bed gasification technology which produces a low-Btu gas which is used as fuel in a combined cycle power plant which has been modified to accommodate the fuel gas produced by an air-blown gasifier. The gasification system also includes hot gas removal of particulates and sulfur compounds from the fuel gas resulting in a plant with exceptionally low atmospheric emissions. Desulfurization is accomplished by a combination of limestone injection into the KRW fluidized bed gasifier and by a transport reactor system. Particulate removal is accomplished by high efficiency cyclones and a barrier filter. The Pinon Pine Project Schedule is divided into three phases. Phase I includes permitting and preliminary design. Phase II, which overlaps Phase I, covers detailed design, procurement, and construction. Phase III will cover the initial operation and demonstration portion of the project.

NONE

1994-12-01T23:59:59.000Z

139

MidAmerican's Walter Scott, Jr. Energy Center Unit 4 earns Power's highest honor  

SciTech Connect

MidAmerican Energy Co. and its project partners are convinced that supercritical coal-firing technology's inherently higher efficiency and lower CO{sub 2} emissions no longer come with a price: reduced reliability. Unit 4 of the Walter Scott, Jr. Energy Center (WSEC) entered into service in June 2006 doubling the capacity of the PRB-coal fuelled plant to 1,600 MW. This is the first major new supercritical plant in the US in more than 15 years. The design of the boiler and the air pollution control systems downstream are described and illustrated. Unit 4 won the 2007 Plant of the Year awarded by Power magazine. 11 figs.

Peltier, R.

2007-08-15T23:59:59.000Z

140

J.K. Spruce power plant, Unit 1, San Antonio, Texas  

SciTech Connect

CPS Energy's J.K. Spruce power plant, Unit 1 was recently recognised by the EUCG Fossil Productivity Committee as the best performer in the large coal plant category over the 2002-2006 evaluation period. The competition was tough, with more than 80 plants in the running, but Unit 1 emerged as the clear winner by earning top points for high plant reliability and very low nonfuel O & M costs. It meets its environmental goals when burning PRB coal in its tangentially fired furnace with recently upgraded low NOx burners, overfire air and a new combustion control system. A baghouse and wet flue gas desulfurization system clean up combustion products. 3 photos.

Peltier, R. [CPS Energy (United States)

2008-10-15T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Social Acceptance of Wind Power in the United States: Evaluating Stakeholder Perspectives (Poster)  

SciTech Connect

As the wind industry strives to achieve 20% wind energy by 2030, maintaining high levels of social acceptance for wind energy will become increasingly important. Wind Powering America is currently researching stakeholder perspectives in the U.S. market and reviewing findings from wind energy projects around the world to better understand social acceptance barriers. Results from European studies show that acceptance varies widely depending on local community values. A preliminary survey shows similar results in the United States. Further research will be conducted to refine our understanding of key social acceptance barriers and evaluate the best ways to mitigate negative perspectives on wind power.

Tegen, S.; Lantz, E.

2009-05-01T23:59:59.000Z

142

Green Power Marketing in the United States: A Status Report (Ninth Edition)  

NLE Websites -- All DOE Office Websites (Extended Search)

of of Energy Office of Energy Efficiency & Renewable Energy National Renewable Energy Laboratory Innovation for Our Energy Future Green Power Marketing in the United States: A Status Report (Ninth Edition) Lori Bird and Blair Swezey Technical Report NREL/TP-640-40904 November 2006 NREL is operated by Midwest Research Institute â—Ź Battelle Contract No. DE-AC36-99-GO10337 Green Power Marketing in the United States: A Status Report (Ninth Edition) Lori Bird and Blair Swezey Prepared under Task No. ASG6.1003 Technical Report NREL/TP-640-40904 November 2006 National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov Operated for the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy

143

Geographic Variation in Potential of Rooftop Residential Photovoltaic Electric Power Production in the United States  

Energy.gov (U.S. Department of Energy (DOE))

This paper describes a geographic evaluation of Zero Energy Home (ZEH) potential, specifically an assessment of residential roof-top solar electric photovoltaic (PV) performance around the United States and how energy produced would match up with very-efficient and super-efficient home designs. We performed annual simulations for 236 TMY2 data locations throughout the United States on two highly-efficient one-story 3-bedroom homes with a generic grid-tied solar electric 2kW PV system. These annual simulations show how potential annual solar electric power generation (kWh) and potential energy savings from PV power vary geographically around the U.S. giving the user in a specific region an indication of their expected PV system performance.

144

A Stochastic Unit-Commitment Model to Estimate the Costs of Changing Power Plant Operation under High Amounts of Intermittent Wind Power  

E-Print Network (OSTI)

) a market for district heating and process heat. Time series for the wind power production rely on timeA Stochastic Unit-Commitment Model to Estimate the Costs of Changing Power Plant Operation under High Amounts of Intermittent Wind Power Integration Meibom, P.1 , Brand, H.2 , Barth, R.2 and Weber, C

145

Green Power Marketing in the United States: A Status Report ; Fifth Edition  

NLE Websites -- All DOE Office Websites (Extended Search)

in the in the United States: A Status Report Fifth Edition August 2000 * NREL/TP-620-28738 Blair Swezey and Lori Bird National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401-3393 NREL is a U.S. Department of Energy Laboratory Operated by Midwest Research Institute * * * * Battelle * * * * Bechtel Contract No. DE-AC36-99-GO10337 National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401-3393 NREL is a U.S. Department of Energy Laboratory Operated by Midwest Research Institute * * * * Battelle * * * * Bechtel Contract No. DE-AC36-99-GO10337 August 2000 * NREL/TP-620-28738 Green Power Marketing in the United States: A Status Report Fifth Edition Blair Swezey and Lori Bird Prepared under Task No. AS65.3010 NOTICE This report was prepared as an account of work sponsored by an agency of the United States

146

Embedding damage detection algorithms in a wireless sensing unit for operational power  

Science Journals Connector (OSTI)

A low-cost wireless sensing unit is designed and fabricated for deployment as the building block of wireless structural health monitoring systems. Finite operational lives of portable power supplies, such as batteries, necessitate optimization of the wireless sensing unit design to attain overall energy efficiency. This is in conflict with the need for wireless radios that have far-reaching communication ranges that require significant amounts of power. As a result, a penalty is incurred by transmitting raw time-history records using scarce system resources such as battery power and bandwidth. Alternatively, a computational core that can accommodate local processing of data is designed and implemented in the wireless sensing unit. The role of the computational core is to perform interrogation tasks of collected raw time-history data and to transmit via the wireless channel the analysis results rather than time-history records. To illustrate the ability of the computational core to execute such embedded engineering analyses, a two-tiered time-series damage detection algorithm is implemented as an example. Using a lumped-mass laboratory structure, local execution of the embedded damage detection method is shown to save energy by avoiding utilization of the wireless channel to transmit raw time-history data.

Jerome Peter Lynch; Arvind Sundararajan; Kincho H Law; Anne S Kiremidjian; Ed Carryer

2004-01-01T23:59:59.000Z

147

15 KJ FLASH LAMP, POWER CONDITIONING UNIT DESIGNED FOR SAFTY, RELIABILITY & MANUFACTURABILITY*  

SciTech Connect

A 15kJoule, Flash Lamp Power Conditioning Unit has been successfully designed, developed, and deployed in the National Ignition Facility (NIF) Preamplifier Modules (PAM). The primary design philosophy of this power conditioning unit (PCU) is safety, reliability, and manufacturability. Cost reduction over commercially equivalent systems was also achieved through an easily manufactured packaging design optimized to meet NIF requirements. While still maintaining low cost, the PCU design includes a robust control system, fault diagnostic system, and safety features. The pulsed power design includes 6 PFN modules, each including a dual series injection trigger transformer, that drive a total of 12 flash lamp loads. The lamps are individually triggered via a 20kV pulse produced by a 1kV, MCT switched capacitive discharge unit on the primary side of the trigger transformer. The remote control interface includes an embedded controller that captures flash lamp current wave forms and fault status for each shot. The embedded controller provides the flexibility of remotely adjusting both the main drive voltage from 1.6 to 2.5 kV and the trigger voltage from 0 to 20 kV.

James, G; Merritt, B; Dreifuerst, G; Strickland, S

2007-08-07T23:59:59.000Z

148

Fault Impacts on Solar Power Unit Reliability Ali M. Bazzi, Katherine A. Kim, Brian B. Johnson, Philip T. Krein, and Alejandro Dominguez-Garca  

E-Print Network (OSTI)

Fault Impacts on Solar Power Unit Reliability Ali M. Bazzi, Katherine A. Kim, Brian B. Johnson a generalized reliability model of a solar power unit (SPU) based on physical characteristics including material--photovoltaic reliability, solar power unit, reliability modeling procedure. I. INTRODUCTION Photovoltaic (PV) power

Liberzon, Daniel

149

Application of quantum-inspired binary gravitational search algorithm for thermal unit commitment with wind power integration  

Science Journals Connector (OSTI)

Abstract As the application of wind power energy is rapidly developing, it is very important to analyze the effects of wind power fluctuation on power system operation. In this paper, a model of thermal unit commitment problem with wind power integration is established and chance constrained programming is applied to simulate the effects of wind power fluctuation. Meanwhile, a combination of quantum-inspired binary gravitational search algorithm and chance constrained programming is proposed to solve the thermal unit commitment problem with wind power integration. In order to reduce the searching time and avoid the premature convergence, a priority list of thermal units and a local mutation adjustment strategy are utilized during the optimization process. The priority list of thermal units is based on the weight between average full-load cost and maximal power output. Then, a stochastic simulation technique is used to deal with the probabilistic constraints. In addition, heuristic search strategies are used to handle deterministic constraints of thermal units. Furthermore, the impacts of different confidence levels and different prediction errors of wind fluctuation on system operation are analyzed respectively. The feasibility and effectiveness of the proposed method are verified by the test system with wind power integration, and the results are compared with those using binary gravitational search algorithm and binary particle swarm optimization. The simulation results demonstrate that the proposed quantum-inspired binary gravitational search algorithm has a higher efficiency in solving thermal unit commitment problem with wind power integration.

Bin Ji; Xiaohui Yuan; Xianshan Li; Yuehua Huang; Wenwu Li

2014-01-01T23:59:59.000Z

150

An integrated computer-based training simulator for the operative personnel of the 800-MW power-generating unit at the Perm District Power Station  

Science Journals Connector (OSTI)

The integrated computer-based training simulator for an 800-MW power-generating unit is described. Its capacities for training the personnel of the boiler-turbine and chemical departments are shown.

N. Yu. Pevneva; V. N. Piskov; A. N. Zenkov

2007-07-01T23:59:59.000Z

151

Aging assessment of auxiliary feedwater systems  

SciTech Connect

A study of Pressurized Water Reactor Auxiliary Feedwater (AFW) Systems has been conducted by Oak Ridge National Laboratory (ORNL) under the auspices of the Nuclear Regulatory Commission's Nuclear Plant Aging Research Program. The study has reviewed historical failure experience and current monitoring practices for the AFW System. This paper provides an overview of the study approach and results. 7 figs.

Casada, D.A. (Oak Ridge National Lab., TN (USA))

1989-01-01T23:59:59.000Z

152

A fuzzy chance-constrained program for unit commitment problem considering demand response, electric vehicle and wind power  

Science Journals Connector (OSTI)

Abstract As a form of renewable and low-carbon energy resource, wind power is anticipated to play an essential role in the future energy structure. Whereas, its features of time mismatch with power demand and uncertainty pose barriers for the power system to utilize it effectively. Hence, a novel unit commitment model is proposed in this paper considering demand response and electric vehicles, which can promote the exploitation of wind power. On the one hand, demand response and electric vehicles have the feasibility to change the load demand curve to solve the mismatch problem. On the other hand, they can serve as reserve for wind power. To deal with the unit commitment problem, authors use a fuzzy chance-constrained program that takes into account the wind power forecasting errors. The numerical study shows that the model can promote the utilization of wind power evidently, making the power system operation more eco-friendly and economical.

Ning Zhang; Zhaoguang Hu; Xue Han; Jian Zhang; Yuhui Zhou

2015-01-01T23:59:59.000Z

153

Reducing water freshwater consumption at coal-fired power plants : approaches used outside the United States.  

SciTech Connect

Coal-fired power plants consume huge quantities of water, and in some water-stressed areas, power plants compete with other users for limited supplies. Extensive use of coal to generate electricity is projected to continue for many years. Faced with increasing power demands and questionable future supplies, industries and governments are seeking ways to reduce freshwater consumption at coal-fired power plants. As the United States investigates various freshwater savings approaches (e.g., the use of alternative water sources), other countries are also researching and implementing approaches to address similar - and in many cases, more challenging - water supply and demand issues. Information about these non-U.S. approaches can be used to help direct near- and mid-term water-consumption research and development (R&D) activities in the United States. This report summarizes the research, development, and deployment (RD&D) status of several approaches used for reducing freshwater consumption by coal-fired power plants in other countries, many of which could be applied, or applied more aggressively, at coal-fired power plants in the United States. Information contained in this report is derived from literature and Internet searches, in some cases supplemented by communication with the researchers, authors, or equipment providers. Because there are few technical, peer-reviewed articles on this topic, much of the information in this report comes from the trade press and other non-peer-reviewed references. Reducing freshwater consumption at coal-fired power plants can occur directly or indirectly. Direct approaches are aimed specifically at reducing water consumption, and they include dry cooling, dry bottom ash handling, low-water-consuming emissions-control technologies, water metering and monitoring, reclaiming water from in-plant operations (e.g., recovery of cooling tower water for boiler makeup water, reclaiming water from flue gas desulfurization [FGD] systems), and desalination. Some of the direct approaches, such as dry air cooling, desalination, and recovery of cooling tower water for boiler makeup water, are costly and are deployed primarily in countries with severe water shortages, such as China, Australia, and South Africa. Table 1 shows drivers and approaches for reducing freshwater consumption in several countries outside the United States. Indirect approaches reduce water consumption while meeting other objectives, such as improving plant efficiency. Plants with higher efficiencies use less energy to produce electricity, and because the greater the energy production, the greater the cooling water needs, increased efficiency will help reduce water consumption. Approaches for improving efficiency (and for indirectly reducing water consumption) include increasing the operating steam parameters (temperature and pressure); using more efficient coal-fired technologies such as cogeneration, IGCC, and direct firing of gas turbines with coal; replacing or retrofitting existing inefficient plants to make them more efficient; installing high-performance monitoring and process controls; and coal drying. The motivations for increasing power plant efficiency outside the United States (and indirectly reducing water consumption) include the following: (1) countries that agreed to reduce carbon emissions (by ratifying the Kyoto protocol) find that one of the most effective ways to do so is to improve plant efficiency; (2) countries that import fuel (e.g., Japan) need highly efficient plants to compensate for higher coal costs; (3) countries with particularly large and growing energy demands, such as China and India, need large, efficient plants; (4) countries with large supplies of low-rank coals, such as Germany, need efficient processes to use such low-energy coals. Some countries have policies that encourage or mandate reduced water consumption - either directly or indirectly. For example, the European Union encourages increased efficiency through its cogeneration directive, which requires member states to assess their

Elcock, D. (Environmental Science Division)

2011-05-09T23:59:59.000Z

154

Job Creation Due to Nuclear Power Resurgence in The United States  

SciTech Connect

The recent revival of global interest in the next generation of nuclear power reactors is causing a reexamination of the role of nuclear power in the United States. This renewed interest has led to questions regarding the capability and capacity of current U.S. industries to support a renewal of nuclear power plant deployment. Key among the many questions currently being asked is what potential exists for the creation of new jobs as a result of developing and operating these new plants? Idaho National Laboratory and Bechtel Power Corporation collaborated to perform a Department of Energy-sponsored study that evaluated the potential for job creation in the U.S. should these new next generation nuclear power plants be built. The study focused primarily on providing an initial estimate of the numbers of new manufacturing jobs that could be created, including those that could be repatriated from overseas, resulting from the construction of these new reactors. In addition to the growth in the manufacturing sector, the study attempted to estimate the potential increase in construction trades necessary to accomplish the new construction.

C. R. Kenley; R. D. Klingler; C. M. Plowman; R. Soto; R. J. Turk; R. L. Baker; S. A. Close; V. L. McDonnell; S. W. Paul; L. R. Rabideau; S. S. Rao; B. P. Reilly

2009-11-01T23:59:59.000Z

155

Tampa Electric Company, Polk Power Station Unit No. 1, preliminary public design report  

SciTech Connect

This preliminary Public Design Report (PDR) provides design information about Tampa Electric Company`s Polk Power Station Unit No. 1, which will demonstrate in a commercial 250 MW unit the benefits of the integration of oxygen-blown, entrained-flow coal gasification with advanced combined cycle technology. This project is partially funded by the US Department of Energy (DOE) under Round III of its Clean Coal Technology (CCT) Program under the provisions of Cooperative Agreement between DOE and Tampa Electric Company, novated on March 5,1992. The project is highlighted by the inclusion of a new hot gas cleanup system. DOE`s project management is based at its Morgantown Energy Technology Center (METC) in West Virginia. This report is preliminary, and the information contained herein is subject to revision. Definitive information will be available in the final PDR, which will be published at the completion of detailed engineering.

NONE

1994-06-01T23:59:59.000Z

156

Radiation consequences of seawater contamination during floating storage of reactor-compartment units from salvaged nuclear-powered submarines  

Science Journals Connector (OSTI)

The storage time before salvaging of decommissioned nuclear-powered submarines and the floating storage time of reactor units from salvaged submarines ... decades. During this time, radioactive contamination of seawater

A. Ya. Blekher; N. L. Kuchin; I. V. Sergeev

157

Wind/hybrid power system test facilities in the United States and Canada  

SciTech Connect

By 1995, there will be four facilities available for testing of wind/hybrid power systems in the United States and Canada. This paper describes the mission, approach, capabilities, and status of activity at each of these facilities. These facilities have in common a focus on power systems for remote, off-grid locations that include wind energy. At the same time, these facilities have diverse, yet complimentary, missions that range from research to technology development to testing. The first facility is the test facility at the Institut de Recherche d`Hydro-Quebec (IREQ), Hydro-Quebec`s research institute near Montreal, Canada. This facility, not currently in operation, was used for initial experiments demonstrating the dynamic stability of a high penetration, no-storage wind/diesel (HPNSWD) concept. The second facility is located at the Atlantic Wind Test Site (AWTS) on Prince Edward Island, Canada, where testing of the HPNSWD concept developed by Hydro-Quebec is currently underway. The third is the Hybrid Power Test Facility planned for the National Wind Technology Center at the National Renewable Energy Laboratory (NREL) in Golden, Colorado, which will focus on testing commercially available hybrid power systems. The fourth is the US Department of Agriculture (USDA) Conservation and Production Research Laboratory in Bushland, Texas, where a test laboratory is being developed to study wind-energy penetration and control strategies for wind/hybrid systems. The authors recognize that this summary of test facilities is not all inclusive; for example, at least one US industrial facility is currently testing a hybrid power system. Our intent, though, is to describe four facilities owned by nonprofit or governmental institutions in North America that are or will be available for ongoing development of wind/hybrid power systems.

Green, H J [National Renewable Energy Lab., Golden, CO (United States); Clark, R N [USDA Conservation and Production Research Laboratory, Bushland, TX (United States); Brothers, C [Atlantic Wind Test Site, North Cape, PE (Canada); Saulnier, B [Institut de Recherche d`Hydro-Quebec, Varennes, PQ (Canada)

1994-05-01T23:59:59.000Z

158

Compressor and Turbine Models of Brayton Units for Space Nuclear Power Systems  

SciTech Connect

Closed Brayton Cycles with centrifugal flow, single-shaft turbo-machines are being considered, with gas cooled nuclear reactors, to provide 10's to 100's of electrical power to support future space exploration missions and Lunar and Mars outposts. Such power system analysis is typically based on the cycle thermodynamics, for given operating pressures and temperatures and assumed polytropic efficiencies of the compressor and turbine of the Brayton energy conversion units. Thus the analysis results not suitable for modeling operation transients such as startup and changes in the electric load. To simulate these transients, accurate models of the turbine and compressor in the Brayton rotating unit, which calculate the changes in the compressor and turbine efficiencies with system operation are needed. This paper presents flow models that account for the design and dimensions of the compressor impeller and diffuser, and the turbine stator and rotor blades. These models calculate the various enthalpy losses and the polytropic efficiencies along with the pressure ratios of the turbine and compressor. The predictions of these models compare well with reported performance data of actual hardware. In addition, the results of a parametric analysis to map the operations of the compressor and turbine, as functions of the rotating shaft speed and inlet Mach number of the gas working fluid, are presented and discussed. The analysis used a binary mixture of He-Xe with a molecular weight of 40 g/mole as the working fluid.

Gallo, Bruno M.; El-Genk, Mohamed S.; Tournier, Jean-Michel [Institute for Space and Nuclear Power Studies, University of New Mexico, Albuquerque, NM, 87131 (United States); Chemical and Nuclear Engineering Department, University of New Mexico, Albuquerque, NM, 87131 (United States)

2007-01-30T23:59:59.000Z

159

Integrated Gasification Combined Cycle (IGCC) demonstration project, Polk Power Station -- Unit No. 1. Annual report, October 1993--September 1994  

SciTech Connect

This describes the Tampa Electric Company`s Polk Power Station Unit 1 (PPS-1) Integrated Gasification Combined Cycle (IGCC) demonstration project which will use a Texaco pressurized, oxygen-blown, entrained-flow coal gasifier to convert approximately 2,300 tons per day of coal (dry basis) coupled with a combined cycle power block to produce a net 250 MW electrical power output. Coal is slurried in water, combined with 95% pure oxygen from an air separation unit, and sent to the gasifier to produce a high temperature, high pressure, medium-Btu syngas with a heat content of about 250 Btu/scf (LHV). The syngas then flows through a high temperature heat recovery unit which cools the syngas prior to its entering the cleanup systems. Molten coal ash flows from the bottom of the high temperature heat recovery unit into a water-filled quench chamber where it solidifies into a marketable slag by-product.

NONE

1995-05-01T23:59:59.000Z

160

Tampa Electric Company Polk Power Station Unit Number 1. Annual report, January--December, 1993  

SciTech Connect

This report satisfies the requirements of Cooperative Agreement DE-FC21-91MC27363, novated as of March 5, 1992, to provide an annual update report on the year`s activities associated with Tampa Electric Company`s 250 MW IGCC demonstration project for the year 1993. Tampa Electric Company`s Polk Power Station Unit 1 (PPS-1) Integrated Gasification Combined Cycle (IGCC) demonstration project will use a Texaco pressurized, oxygen-blown, entrained-flow coal gasifier to convert approximately 2,000 tons per day of coal (dry basis) coupled with a combined cycle power block to produce a net 250 MW electrical power output. Approximately 50% of the raw, hot syngas is cooled to 900 F and passed through a moving bed of zinc-based sorbent which removes sulfur containing compounds from the syngas. The remaining portion of the raw, hot syngas is cooled to 400 F for conventional acid gas removal. Sulfur-bearing compounds from both cleanup systems are sent to a conventional sulfuric acid plant to produce a marketable, high-purity sulfuric acid by-product. The cleaned medium-BTU syngas from these processes is routed to the combined cycle power generation system where it is mixed with air and burned in the combustion section of the combustion turbine. Heat is extracted from the expanded exhaust gases in a heat recovery steam generator (HRSG) to produce steam at three pressure levels for use throughout the integrated process. A highly modular, microprocessor-based distributed control system (DCS) is being developed to provide continuous and sequential control for most of the equipment on PPS-1.

Not Available

1994-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Impacts from Deployment Barriers on the United States Wind Power Industry: Overview & Preliminary Findings (Presentation)  

SciTech Connect

Regardless of cost and performance some wind projects are unable to proceed to commissioning as a result of deployment barriers. Principal deployment barriers in the industry today include: wildlife, public acceptance, access to transmission, and radar. To date, methods for understanding these non-technical barriers have failed to accurately characterize the costs imposed by deployment barriers and the degree of impact to the industry. Analytical challenges include limited data and modeling capabilities. Changes in policy and regulation, among other factors, also add complexity to analysis of impacts from deployment barriers. This presentation details preliminary results from new NREL analysis focused on quantifying the impact of deployment barriers on the wind resource of the United States, the installed cost of wind projects, and the total electric power system cost of a 20% wind energy future. In terms of impacts to wind project costs and developable land, preliminary findings suggest that deployment barriers are secondary to market drivers such as demand. Nevertheless, impacts to wind project costs are on the order of $100/kW and a substantial share of the potentially developable windy land in the United States is indeed affected by deployment barriers.

Lantz, E.; Tegen, S.; Hand, M.; Heimiller, D.

2012-09-01T23:59:59.000Z

162

Watts Bar Unit 1 Cycle Zero Power Physics Tests Analysis with VERA-CS  

SciTech Connect

The Consortium for Advanced Simulation of Light Water Reactors (CASL) is developing a collection of methods and software products known as VERA, the Virtual Environment for Reactor Applications, including a core simulation capability called VERA-CS. A key milestone for this endeavor is to validate VERA against measurements from operating nuclear power reactors. The first step in validation against plant data is to determine the ability of VERA to accurately simulate the initial startup physics tests for Watts Bar Nuclear Power Station, Unit 1 (WBN1) cycle 1. VERA-CS calculations were performed with the Insilico code developed at ORNL using cross section processing from the SCALE system and the transport capabilities within the Denovo transport code using the SPN method. The calculations were performed with ENDF/B-VII.0 cross sections in 252 groups (collapsed to 23 groups for the 3D transport solution). The key results of the comparison of calculations with measurements include initial criticality, control rod worth critical configurations, control rod worth, differential boron worth, and isothermal temperature reactivity coefficient (ITC). The VERA results for these parameters show good agreement with measurements, with the exception of the ITC, which requires additional investigation. Results are also compared to those obtained with Monte Carlo methods and a current industry core simulator.

Gehin, Jess C [ORNL; Godfrey, Andrew T [ORNL; Evans, Thomas M [ORNL; Hamilton, Steven P [ORNL; Francheschini, F. [Westinghouse Electric Company, Cranberry Township

2014-01-01T23:59:59.000Z

163

Impact of High Wind Power Penetration on Hydroelectric Unit Operations: Preprint  

SciTech Connect

This paper examines the impact of this large amount of wind penetration on hydroelectric unit operations. Changes in hydroelectric unit operating unit patterns are examined for an aggregation of all hydro generators.

Hodge, B. M.; Lew, D.; Milligan, M.

2011-10-01T23:59:59.000Z

164

Community wind power ownership schemes in Europe and their relevance to the United States  

E-Print Network (OSTI)

to invest in a wind turbine, and sell the power to the localwind cooperatives have traditionally sold their power towind cooperatives have traditionally sold their power to the

Bolinger, Mark

2001-01-01T23:59:59.000Z

165

Heat exchanger with auxiliary cooling system  

DOE Patents (OSTI)

A heat exchanger with an auxiliary cooling system capable of cooling a nuclear reactor should the normal cooling mechanism become inoperable. A cooling coil is disposed around vertical heat transfer tubes that carry secondary coolant therethrough and is located in a downward flow of primary coolant that passes in heat transfer relationship with both the cooling coil and the vertical heat transfer tubes. A third coolant is pumped through the cooling coil which absorbs heat from the primary coolant which increases the downward flow of the primary coolant thereby increasing the natural circulation of the primary coolant through the nuclear reactor.

Coleman, John H. (Salem Township, Westmoreland County, PA)

1980-01-01T23:59:59.000Z

166

National Ignition Facility subsystem design requirements laser auxiliary subsystem SSDR 1.3.5  

SciTech Connect

This system design requirement document establishes the performance, design, development and test requirements for the NIF Laser Auxiliary Systems. The Laser Auxiliary Systems consist of: a. Gas Cooling System; b. Low conductivity cooling water system; C. Deionized cooling water system; d. Electrical power distribution system. The gas cooling system will be used for cooling the main laser amplifier flashlamps and some smaller quantities will be used for purging Pockels cells and for diode pumps in preamplifier. The low conductivity cooling water system will be used for cooling the capacitor banks. The deionized cooling water system will be used to cool the multi-pass amplifier in the OPG PAM. Electrical power will be required for the OPG systems, Pockels cells, power conditioning, and amplifier support equipment.

Mukherji, S.

1996-10-24T23:59:59.000Z

167

Installation for a nuclear power station with staggered swimming pools  

SciTech Connect

In an installation for a nuclear power station comprising a ''reactor building'' with a first swimming pool for handling of fuel units and a fuel building with a second swimming pool for the transfer, storage and deactivation of the units, the second swimming pool is located at a lower level than that of the first and is connected to the first by an intermediate auxiliary chamber filled with water and located under the first swimming pool. The auxiliary chamber is connected by a vertical pipeline to the first swimming pool and by a horizontal connecting pipeline to the second swimming pool. Each of the pipelines is provided with a shut-off valve, with interlocking means which prevents the simultaneous opening of the two valves. There is negligible dead space around a conveyor basket for fuel units when it is in the vertical or horizontal pipelines.

Gigou, R.

1982-12-28T23:59:59.000Z

168

Making european-style community wind power development work in the United States  

E-Print Network (OSTI)

and sells power to Xcel under the small wind tariff. Thecommunity wind projects are currently selling power to the

Bolinger, Mark A.

2004-01-01T23:59:59.000Z

169

The virtual digital nuclear power plant: A modern tool for supporting the lifecycle of VVER-based nuclear power units  

Science Journals Connector (OSTI)

The article describes the “Virtual Digital VVER-Based Nuclear Power Plant” computerized system comprising a totality of verified ... a model intended for describing the behavior of nuclear power plant (NPP) syste...

G. V. Arkadov; A. P. Zhukavin; A. E. Kroshilin; I. A. Parshikov…

2014-10-01T23:59:59.000Z

170

Solid Oxide Fuel Cell Successfully Powers Truck Cab and Sleeper in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solid Oxide Fuel Cell Successfully Powers Truck Cab and Sleeper in Solid Oxide Fuel Cell Successfully Powers Truck Cab and Sleeper in DOE-Sponsored Test Solid Oxide Fuel Cell Successfully Powers Truck Cab and Sleeper in DOE-Sponsored Test March 19, 2009 - 1:00pm Addthis Washington, DC --In a test sponsored by the U.S. Department of Energy (DOE), a Delphi auxiliary power unit employing a solid oxide fuel cell (SOFC) successfully operated the electrical system and air conditioning of a Peterbilt Model 386 truck under conditions simulating idling conditions for 10 hours. The device provides an alternative to running a truck's main diesel engine, or using a truck's batteries, to power auxiliary electrical loads during rest periods, thereby lowering emissions, reducing noise, and saving fuel. In testing at Peterbilt Motors Company Texas head-quarters, a Delphi

171

84Unit Conversions Energy, Power, Flux Energy is measured in a number of ways depending on what property is being  

E-Print Network (OSTI)

property is being represented. Total Energy - Joules and ergs - The total amount of energy in various forms is left on for 1 hour: Convert its energy consumption of 5 watt-hours to Joules. 1 Joule 3,600 sec 5 Watt84Unit Conversions ­ Energy, Power, Flux Energy is measured in a number of ways depending on what

172

Environmental Implications of United States Coal Exports: A Comparative Life Cycle Assessment of Future Power System Scenarios  

Science Journals Connector (OSTI)

Stricter emissions requirements on coal-fired power plants together with low natural gas prices have contributed to a recent decline in the use of coal for electricity generation in the United States. Faced with a shrinking domestic market, many coal ...

Barrett Bohnengel; Dalia Patińo-Echeverri; Joule Bergerson

2014-07-15T23:59:59.000Z

173

MEASUREMENTS OF THE CONFINEMENT LEAKTIGHTNESS AT THE KOLA NUCLEAR POWER STATION (UNIT 2) IN RUSSIA  

SciTech Connect

This is the final report on the INSP project entitled, ``Kola Confinement Leaktightness'' conducted by BNL under the authorization of Project Work Plan WBS 1.2.2.1. This project was initiated in February 1993 to assist the Russians to reduce risks associated with the continued operation of older Soviet-designed nuclear power plants, specifically the Kola VVER-440/230 Units 1 and 2, through upgrades in the confinement performance to reduce the uncontrolled leakage rate. The major technical objective of this-project was to improve the leaktightness of the Kola NPP VVER confinement boundaries, through the application of a variety of sealants to penetrations, doors and hatches, seams and surfaces, to the extent that current technology permitted. A related objective was the transfer, through training of Russian staff, of the materials application procedures to the staff of the Kola NPP. This project was part of an overall approach to minimizing uncontrolled releases from the Kola NPP VVER440/230s in the event of a serious accident, and to thereby significantly mitigate the consequences of such an accident. The US provided materials, application technology, and applications equipment for application of sealant materials, surface coatings, potting materials and gaskets, to improve the confinement leaktightness of the Kola VVER-440/23Os. The US provided for training of Russian personnel in the applications technology.

GREENE,G.A.; GUPPY,J.G.

1998-08-01T23:59:59.000Z

174

Community wind power ownership schemes in Europe and their relevance to the United States  

E-Print Network (OSTI)

of Community Wind Power Ownership in Europe..46 4.3 Factorsof Community Wind Power Ownership in Europe More than halfCommunity Wind Power Ownership Schemes in Europe and their

Bolinger, Mark

2001-01-01T23:59:59.000Z

175

Auxiliary fields representation for modified gravity models  

SciTech Connect

We consider tensor-multiscalar representations for several types of modified gravity actions. The first example is the theory with the action representing an arbitrary smooth function of the scalar curvature R and {open_square}R, the integrand of the Gauss-Bonnet term and the square of the Weyl tensor. We present a simple procedure leading to an equivalent theory of a space-time metric and four auxiliary scalars and especially discuss the calibration of a cosmological constant and the condition of the existence of de Sitter-like solutions in the case of an empty universe. The condition for obtaining a smaller number of independent scalar fields is derived. The second example is the Eddington-like gravity action. In this case we show, in particular, the equivalence of the theory to general relativity with the cosmological constant term, with or without use of the first-order formalism, and also discuss some possible generalizations.

Rodrigues, Davi C.; Salles, Filipe de O; Shapiro, Ilya L.; Starobinsky, Alexei A. [Departamento de Fisica, CCE, Universidade Federal do Espirito Santo, 29075-910, Vitoria, ES (Brazil); Departamento de Fisica, ICE, Universidade Federal de Juiz de Fora, 36036-330, MG (Brazil); Landau Institute for Theoretical Physics, Moscow, 119334 (Russian Federation); RESCEU, Graduate School of Science, University of Tokyo, Tokyo 113-0033 (Japan)

2011-04-15T23:59:59.000Z

176

Impact of High Wind Power Penetration on Hydroelectric Unit Operations in the WWSIS  

SciTech Connect

This report examines the impact of this large amount of wind penetration on hydroelectric unit operations. Changes in hydroelectric unit operating patterns are examined both for an aggregation of all hydro generators and for select individual plants.

Hodge, B.-M.; Lew, D.; Milligan, M.

2011-07-01T23:59:59.000Z

177

Shutdown and low-power operation at commercial nuclear power plants in the United States. Final report  

SciTech Connect

The report contains the results of the NRC Staff`s evaluation of shutdown and low-power operations at US commercial nuclear power plants. The report describes studies conducted by the staff in the following areas: Operating experience related to shutdown and low-power operations, probabilistic risk assessment of shutdown and low-power conditions and utility programs for planning and conducting activities during periods the plant is shut down. The report also documents evaluations of a number of technical issues regarding shutdown and low-power operations performed by the staff, including the principal findings and conclusions. Potential new regulatory requirements are discussed, as well as potential changes in NRC programs. A draft report was issued for comment in February 1992. This report is the final version and includes the responses to the comments along with the staff regulatory analysis of potential new requirements.

Not Available

1993-09-01T23:59:59.000Z

178

A new small Stirling engine prototype for auxiliary employments aboard  

SciTech Connect

The development of a small size Stirling engine as low power system for auxiliary employments aboard sailing boats or caravan still appears interesting. In previous papers the author presented the design, the prototype construction and the experimental tests of a monocylinder P-type configuration with the regenerator and part of the heat exchangers set on the displacer; the heat was irradiated by the head and it was removed by the water circulating through the rod of the displacer and around the cylinder. Considerable reductions in dead volume and global dimensions were obtained. At the same time, however, the weight of the heat exchanger regenerator displacer, mainly due to the cooler, kept the speed of revolution from increasing, with consequent limitation of specific power value; furthermore thermal insulation between hot and cold ends and displacer rod seals proved to be critical features as far as reliability is concerned. A new prototype has been developed adopting {gamma}-type configuration with stationary heat exchangers and with the displacer connecting rod linked to the crankshaft by means of an epicyclic train able to make its movement linear thus eliminating rod seal side loadings. The paper deals with the criteria followed with the design and the prototype construction; the adopted technical solutions are shown and discussed.

Bartolini, C.M.; Caresana, F. [Univ. di Ancona (Italy). Dipt. di Energetica

1995-12-31T23:59:59.000Z

179

Nonlinear Adaptive Control of Networked Power Generators with Remote Measurement Units  

E-Print Network (OSTI)

provided by Phasor Measurement Units (PMU). The proposed control system is designed in a robust way illustrate its good behavior, and suggest that the new measurement and data transmission devices can bring Measurement Units (PMU). These devices are far beyond SCADA, and let one envisage the use of real time remote

Paris-Sud XI, Université de

180

E-Print Network 3.0 - auxiliary building structural Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

restoring the lattice structure in L + amounts to inserting some auxiliary... the cover graph of L + x. This amounts, when odds and their respective auxiliaries are known, to...

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

E-Print Network 3.0 - auxiliary potential energy Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

P. T. and Warner, J. C. Green Chemistry: Theory and Practice. Oxford University Press: New Summary: their toxicity. 5. Safer Solvents and Auxiliaries The use of auxiliary...

182

Application of CFB technology for large power generating units and CO2 capture  

Science Journals Connector (OSTI)

Data on the development of the circulating fluidized bed (CFB) technology for combustion of fuels in large ... feasibility of raising the efficiency of units with CFB boilers through deep recovery of the heat ......

G. A. Ryabov; O. M. Folomeev; D. A. Sankin…

2010-07-01T23:59:59.000Z

183

Device for cooling the vertical walls of a power engineering unit  

Science Journals Connector (OSTI)

Construction and operation is described for a water cooling device for the hot walls of a heating unit. Calculation of the technical parameters of the proposed device are presented.

S. Ya. Davydov; I. D. Kashcheev; A. E. Zamurayev…

2011-03-01T23:59:59.000Z

184

Characterization of Wind Power Resource in the United States and its Intermittency  

E-Print Network (OSTI)

Wind resource in the continental and offshore United States has been reconstructed and characterized using metrics that describe, apart from abundance, its availability, persistence and intermittency. The Modern Era ...

Gunturu, U.B.

185

Trends of Wind and Wind Power Over the Coterminous United States.  

E-Print Network (OSTI)

??The trends of wind and wind power at a typical wind turbine hub height (80 m) are analyzed using the North American Regional Reanalysis (NARR)… (more)

Holt, Eric M

2011-01-01T23:59:59.000Z

186

An examination of the pursuit of nuclear power plant construction projects in the United States .  

E-Print Network (OSTI)

??The recent serious reconsideration of nuclear power as a means for U.S. electric utilities to increase their generation capacity provokes many questions regarding the achievable… (more)

Guyer, Brittany (Brittany Leigh)

2011-01-01T23:59:59.000Z

187

Supporting Solar Power in Renewables Portfolio Standards: Experience from the United States  

E-Print Network (OSTI)

The Illinois Power Agency (IPA) was created to developof RPS compliance, the IPA plans and administers elements offor renewable energy; the IPA also prepares a compliance

Wiser, Ryan

2010-01-01T23:59:59.000Z

188

Transformer failure and common-mode loss of instrument power at Nine Mile Point Unit 2 on August 13, 1991  

SciTech Connect

On August 13, 1991, at Nine Mile Point Unit 2 nuclear power plant, located near Scriba, New York, on Lake Ontario, the main transformer experienced an internal failure that resulted in degraded voltage which caused the simultaneous loss of five uninterruptible power supplies, which in turn caused the loss of several nonsafety systems, including reactor control rod position indication, some reactor power and water indication, control room annunciators, the plant communications system, the plant process computer, and lighting at some locations. The reactor was subsequently brought to a safe shutdown. Following this event, the US Nuclear Regulatory Commission dispatched an Incident Investigation Team to the site to determine what happened, to identify the probable causes, and to make appropriate findings and conclusions. This report describes the incident, the methodology used by the team in its investigation, and presents and the team's findings and conclusions. 59 figs., 14 tabs.

Not Available

1991-10-01T23:59:59.000Z

189

Minimizing electricity costs with an auxiliary generator using stochastic programming  

E-Print Network (OSTI)

This thesis addresses the problem of minimizing a facility's electricity costs by generating optimal responses using an auxiliary generator as the parameter of the control systems. The-goal of the thesis is to find an ...

Rafiuly, Paul, 1976-

2000-01-01T23:59:59.000Z

190

Experience in the repair of steam generator auxiliary feedwater nozzle  

SciTech Connect

The auxiliary feedwater nozzle is quite often subjected to more thermal stress cycles and other loading mechanisms during their service life than the material was designed and fabricated for at the nozzle of the earlier steam generators in many nuclear plants. During plant operation, the auxiliary feedwater nozzle outlet is exposed to the hot steam from the generator side, while the auxiliary feedwater piping which contains subcooled water from the inlet often induces water hammer as a result of the steam-water mixing phenomena. The thermal cycles and the steam bubble collapse at the nozzle may cause cracking in the nozzle liner and interior surface of the nozzle, and subsequently results in structural damage to the steam generator. This presentation is intended to share the lessons learned from the evaluation of the nozzle condition and the subsequent modification and repair made to the auxiliary feedwater nozzle at the Palisades Nuclear Plant. Other nuclear plant owners may benefit from this experience.

Chao, K.K.N. [Consumers Power Co., Jackson, MI (United States)

1996-12-01T23:59:59.000Z

191

SASKATCHEWAN HEALTH-CARE AUXILIARIES ASSOCIATION Bursary Application  

E-Print Network (OSTI)

SASKATCHEWAN HEALTH-CARE AUXILIARIES ASSOCIATION Bursary Application This bursary is awarded to a student entering the second year of a Registered Nursing Education Program in Saskatchewan. It is awarded

Peak, Derek

192

Cost of Power Interruptions to Electricity Consumers in the UnitedStates (U.S.)  

SciTech Connect

The massive electric power blackout in the northeastern U.S.and Canada on August 14-15, 2003 catalyzed discussions about modernizingthe U.S. electricity grid. Industry sources suggested that investments of$50 to $100 billion would be needed. This work seeks to better understandan important piece of information that has been missing from thesediscussions: What do power interruptions and fluctuations in powerquality (power-quality events) cost electricity consumers? We developed abottom-up approach for assessing the cost to U.S. electricity consumersof power interruptions and power-quality events (referred to collectivelyas "reliability events"). The approach can be used to help assess thepotential benefits of investments in improving the reliability of thegrid. We developed a new estimate based on publicly availableinformation, and assessed how uncertainties in these data affect thisestimate using sensitivity analysis.

Hamachi LaCommare, Kristina; Eto, Joseph H.

2006-02-16T23:59:59.000Z

193

Correlation Between Geographically Dispersed Concentrating Solar Power and Demand in the United States  

SciTech Connect

Correlations between the electricity generated by concentrating solar thermal power (CSP) plants, as well as cross-correlations between CSP, wind power and electricity demand, have significant impacts on decisions for how much and where to build utility-scale CSP capacity, the optimal amount of thermal storage in the CSP plants, reserve capacity needed to back-up the system, as well as the expected levels of curtailed renewable power. Accurately estimating these correlations is vital to performing detailed analyses of high renewable penetration scenarios. This study quantifies the degree of correlation between geographically dispersed CSP, as well as the correlation between CSP and wind power, and CSP and electricity demand in 356 discrete regions in the contiguous US. Correlations are calculated using hourly data on an annual basis. Maps of the correlations will be presented to illustrate the degree of correlation between solar power and the demand it is serving, as well as the synergies between the negatively-correlated wind power and solar power serving the same region.

Mowers, M.; Helm, C.; Blair, N.; Short, W.

2010-01-01T23:59:59.000Z

194

A comparative analysis of business structures suitable forfarmer-owned wind power projects in the United States  

SciTech Connect

For years, farmers in the United States have looked with envy on their European counterparts' ability to profitably farm the wind through ownership of distributed, utility-scale wind projects. Only within the past few years, however, has farmer- or community-owned wind power development become a reality in the United States. The primary hurdle to this type of development in the United States has been devising and implementing suitable business and legal structures that enable such projects to take advantage of tax-based federal incentives for wind power. This article discusses the limitations of such incentives in supporting farmer- or community-owned wind projects, describes four ownership structures that potentially overcome such limitations, and finally conducts comparative financial analysis on those four structures, using as an example a hypothetical 1.5 MW farmer-owned project located in the state of Oregon. We find that material differences in the competitiveness of each structure do exist, but that choosing the best structure for a given project will largely depend on the conditions at hand; e.g., the ability of the farmer(s) to utilize tax credits, preference for individual versus ''cooperative'' ownership, and the state and utility service territory in which the project will be located.

Bolinger, Mark; Wiser, Ryan

2004-11-11T23:59:59.000Z

195

Potential Role of Concentrating Solar Power in Enabling High Renewables Scenarios in the United States  

SciTech Connect

This work describes the analysis of concentrating solar power (CSP) in two studies -- The SunShot Vision Study and the Renewable Electricity Futures Study -- and the potential role of CSP in a future energy mix.

Denholm, P.; Hand, M.; Mai, T.; Margolis, R.; Brinkman, G.; Drury, E.; Mowers, M.; Turchi, C.

2012-10-01T23:59:59.000Z

196

Optimum Capacity Allocation of DG Units Based on Unbalanced Three-phase Optimal Power Flow  

E-Print Network (OSTI)

of distributed generation (DG). Some positive support benefits of DG installation are system energy loss distribution system planning is necessary. Adnan Anwar and H. R. Pota are with the School of Engineering for determining opti- mum generation capacity of multiple distributed generation (DG) units is presented

Pota, Himanshu Roy

197

Fuel consumption rate in a heat-powered unit analyzed as a function of the temperature and consumption ratio of the air  

Science Journals Connector (OSTI)

An analysis of fuel consumption for a heat-powered unit in the ... of ceramic materials is given. The heat consumption rate is analyzed as a function of ... generating the working medium, and of the consumption r...

N. A. Tyutin

2006-01-01T23:59:59.000Z

198

Retrofit Project of 2×100 MW Units in Yushe Power Plant, Shanxi Province Using Two Boilers-One CFB FGD  

Science Journals Connector (OSTI)

This paper takes the example of the retrofit of 2×100 MW units of Yushe Power Plant in Shanxi Province, and summarizes the applications of circulation fluid bed flue gas desulphurization (CFB-FGD) adopted “two bo...

Lin Fulin; Lian Egui

2009-01-01T23:59:59.000Z

199

Automatic control systems for gas-turbine units in mini power stations: Testing automation at the stages of design and tuning  

Science Journals Connector (OSTI)

This paper presents the testing automation procedure for automatic control systems of gas-turbine units used as drives in small-size power stations. We substantiate the applicability of mathematical modeling...

B. V. Kavalerov

2013-11-01T23:59:59.000Z

200

Wind power systems for zero net energy housing in the United States  

Science Journals Connector (OSTI)

This work investigates the feasibility of renewable energy housing development in the U.S. using wind power and solar thermal systems to attain zero net energy consumption. The over all objective was to determine how the wind power and solar thermal system designs and economics differ with various climates, wind and solar resources, energy prices, and state incentives, such as net-metering. Five U.S. cities, one in each of the five climate zones, were selected for this study based on their potential for wind power. A zero net energy housing design tool was developed in order to analyze and compare various system designs. The energy performance and economics of the designs were compared for various sizes of housing development, for seven turbine models, and selected heating systems. The results suggest that while there are some economical options for wind powered zero net energy housing developments, they are generally more expensive (except in the warmest climate zone) than housing with natural gas heating. In all of the cases, the economies of scale for large-scale wind turbines gave more of an economic advantage than net-metering programs gave small- and medium-scale wind turbines.

Melissa R. Elkinton; Jon G. McGowan; James F. Manwell

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Algorithm for Screening Phasor Measurement Unit Data for Power System Events and Categories and Common Characteristics for Events Seen in Phasor Measurement Unit Relative Phase-Angle Differences and Frequency Signals  

SciTech Connect

A network of multiple phasor measurement units (PMU) was created, set up, and maintained at the University of Texas at Austin to obtain actual power system measurements for power system analysis. Power system analysis in this report covers a variety of time ranges, such as short- term analysis for power system disturbances and their effects on power system behavior and long- term power system behavior using modal analysis. The first objective of this report is to screen the PMU data for events. The second objective of the report is to identify and describe common characteristics extracted from power system events as measured by PMUs. The numerical characteristics for each category and how these characteristics are used to create selection rules for the algorithm are also described. Trends in PMU data related to different levels and fluctuations in wind power output are also examined.

Allen, A.; Santoso, S.; Muljadi, E.

2013-08-01T23:59:59.000Z

202

The Vermont Yankee Nuclear Power Station will use a single-unit boilingwater  

E-Print Network (OSTI)

reactor with an initial power rating of 1593 thermal megawatts (MWt) to provide a net power output of 513 electrical megawatts (Me). The reactor will be cooled by a once-through flow of water pumped from and returned to Vernon Pond, an existing impoundment of the Connecticut River (built to serve the Vernon Hydroelectric Station) and also by means of mechanical draft cooling towers. 3. Sumnary of environmental impact including beneficial and adverse effects follows: a. Cooling water heated to about 20*F above inlet temperature will be discharged to Vernon Pond at a rate of 840 cfs when the plant operates on a total open-cycle basis. Mechanical-draft cooling towers are provided to protect Vernon Pond during low flow and critical temperature periods in the Connecticut River. b. About 150 acres of Vernon Pond in the vicinity of the station may be subjected to some thermal and biological stress from discharge of the

Vermont Yankee

203

Wind Power Development in the United States: Current Progress, Future Trends  

SciTech Connect

The U.S. wind power industry is in an era of substantial growth, with the U.S. and China likely to vie for largest-market status for years to come. With the market evolving at such a rapid pace, keeping up with current trends in the marketplace has become increasingly difficult. At the same time, limits to future growth are uncertain. This paper summarizes major trends in the U.S. wind market, and explores the technical and economic feasibility of achieving much greater levels of wind penetration. China would be well served to conduct similar analyses of the feasibility, benefits, challenges, and policy needs associated with much higher levels of wind power generation than currently expressed in national targets.

Wiser, Ryan H

2008-10-29T23:59:59.000Z

204

History of Sandia National Laboratories` auxiliary closure mechanisms  

SciTech Connect

An essential component of a horizontal, underground nuclear test setup at the Nevada Test Site is the auxiliary closure system. The massive gates that slam shut immediately after a device has been detonated allow the prompt radiation to pass, but block debris and hot gases from continuing down the tunnel. Thus, the gates protect experiments located in the horizontal line-of-sight steel pipe. Sandia National Laboratories has been the major designer and developer of these closure systems. This report records the history of SNL`s participation in and contributions to the technology of auxiliary closure systems used in horizontal tunnel tests in the underground test program.

Weydert, J.C. [Sandia National Labs., Albuquerque, NM (United States); Ponder, G.M. [Geo-Centers, Inc., Albuquerque, NM (United States)

1993-12-01T23:59:59.000Z

205

Power Supply Changes for NSTX Resistive Wall Mode Coils  

SciTech Connect

The National Spherical Torus Experiment (NSTX) has been designed and installed in the existing facilities at Princeton Plasma Physics Laboratory (PPPL). Most of the hardware, plant facilities, auxiliary sub-systems, and power systems originally used for the Tokamak Fusion Test Reactor (TFTR) have been used with suitable modifications to reflect NSTX needs. Prior to 2004, the NSTX power system was feeding twelve (12) circuits in the machine. In 2004 the Resistive Wall Mode (RWM) Coils were installed on the machine to correct error fields. There are six of these coils installed around the machine in the mid-plane. Since these coils need fast and accurate controls, a Switching Power Amplifier (SPA) with three sub-units was procured, installed and commissioned along with other power loop components. Two RWM Coils were connected in series and fed from one SPA sub-unit. After the initial RWM campaign, operational requirements evolved such that each of the RWM coils now requires separate power and control. Hence a second SPA with three sub-units has been procured and installed. The second unit is of improved design and has the controls and power components completely isolated. The existing thyristor rectifier is used as DC Link to both of the Switching Power Amplifiers. The controls for the RWM are integrated into the overall computer control of the DC Power systems for NSTX. This paper describes the design changes in the RWM Power system for NSTX.

Ramakrishnan, S S.

2013-06-28T23:59:59.000Z

206

Civil RICO - the pattern of racketeering requirement: Louisiana Power and Light v. United Gas Pipeline  

SciTech Connect

The court decisions in a suit involving Louisiana Power and Light grants relief from a pattern following the Sedima case, in which the Supreme Court noted that the Racketeer Influenced and Corrupt Organizations (RICO) Act has led in directions not intended by legislators. Post-Sedima decisions have confronted confusion over the definition of the terms pattern, criminal schemes, and criminal episodes. Congress and the courts need to develop meaningful definitions, although the author suggests that the courts should not become so involved with semantics that they lose their perspective to the point of indirectly labeling community leaders as mobsters.

Not Available

1987-01-01T23:59:59.000Z

207

Design and Operational Planning of Energy Networks Based on Combined Heat and Power Units  

Science Journals Connector (OSTI)

For each time period and sector, big-M constraints 13 model the heat (generated by the energy generator installed in the sector) transferred to the heat storage tank of the sector (Q?sit). ... Heat and electricity demand data for the reference case have been taken from the Milton Keynes Energy Park data set provided by the U.K. Energy Research Centre Energy Data Centre. ... Cardoso, G.; Stadler, M.; Siddiqui, A.; Marnay, C.; Deforest, N.; Barbosa-Póvoa, A.; Ferrăo, P.Microgrid reliability modeling and battery scheduling using stochastic linear programming Electric Power Syst. ...

Nikolaos E. Koltsaklis; Georgios M. Kopanos; Michael C. Georgiadis

2014-03-05T23:59:59.000Z

208

Land Use Requirements of Modern Wind Power Plants in the United States  

SciTech Connect

This report provides data and analysis of the land use associated with modern, large wind power plants (defined as greater than 20 megawatts (MW) and constructed after 2000). The analysis discusses standard land-use metrics as established in the life-cycle assessment literature, and then discusses their applicability to wind power plants. The report identifies two major 'classes' of wind plant land use: 1) direct impact (i.e., disturbed land due to physical infrastructure development), and 2) total area (i.e., land associated with the complete wind plant project). The analysis also provides data for each of these classes, derived from project applications, environmental impact statements, and other sources. It attempts to identify relationships among land use, wind plant configuration, and geography. The analysts evaluated 172 existing or proposed projects, which represents more than 26 GW of capacity. In addition to providing land-use data and summary statistics, they identify several limitations to the existing wind project area data sets, and suggest additional analysis that could aid in evaluating actual land use and impacts associated with deployment of wind energy.

Denholm, P.; Hand, M.; Jackson, M.; Ong, S.

2009-08-01T23:59:59.000Z

209

PTC, ITC, or Cash Grant? An Analysis of the Choice Facing Renewable Power Projects in the United States  

SciTech Connect

Renewable power technologies are inherently capital-intensive, often (but not always) with relatively high construction costs and low operating costs. For this reason, renewable power technologies are typically more sensitive to the availability and cost of financing than are natural gas power plants, for example. In the United States, the bulk of renewable project finance in recent years has been provided by 'tax equity investors' (typically large investment banks and insurance companies) who partner with project developers through highly specialized financing structures (Bolinger, 2009; Cory et al., 2008; Harper et al., 2007). These structures have been designed primarily to capitalize on federal support for renewable power technologies, which has historically come in the form of tax credits and accelerated depreciation deductions. The number of tax equity investors active in the renewable power market has declined precipitously, however, as a result of the financial crisis that began unfolding across the globe in the summer of 2008. The resulting shortage and increased cost of project financing has, in turn, slowed the development of new renewable power projects, leading to layoffs throughout the entire industry supply chain. In recognition of the fact that tax-based policy incentives are not particularly effective when tax burdens are shrinking or non-existent, Congress included several provisions in 'The American Recovery and Reinvestment Act of 2009' (ARRA 2009) designed to make federal incentives for renewable power technologies more useful. Among these provisions is one that allows projects eligible to receive the production tax credit ('the PTC', see Text Box 1) to instead elect the investment tax credit ('the ITC', see Text Box 2). Another provision enables ITC-eligible projects (which now include most PTC-eligible renewable power projects) to instead receive--for a limited time only--a cash grant of equivalent value. These two provisions (among others) could have a significant impact on how renewable power projects are financed over the next few years. The purpose of this report is to both quantitatively and qualitatively analyze, from the project developer/owner perspective, the choice between the PTC and the ITC (or equivalent cash grant) for a number of different renewable power technologies.1 Because the two credits are structured differently, and apply in different ways to different technologies, the choice between the two lends itself to quantitative financial analysis of the conditions under which either the PTC or the ITC would, at least in theory, provide greater financial value. Qualitative considerations may be equally important, however, particularly in instances where quantitative differences are modest. This report proceeds as follows. Section 2 provides a brief summary of ARRA 2009, with some emphasis on those provisions designed to ease the liquidity crisis facing the renewable power sector. Section 3 describes the quantitative analysis methodology, as well as modeling results for wind, open-loop biomass, closed-loop biomass, geothermal, and landfill gas projects. Section 4 discusses a number of qualitative considerations that may play as important of a role as quantitative results in deciding between the PTC and the ITC (or equivalent cash grant). Section 5 concludes, and an Appendix provides supplemental tables that present quantitative analysis results conducted at different discount rates.

Bolinger, Mark; Wiser, Ryan; Cory, Karlynn; James, Ted

2009-03-11T23:59:59.000Z

210

Economic feasibility of heat supply from nuclear power plants in the United States  

SciTech Connect

Nuclear energy is regarded as competitive for urban district heating applications. Hot water heat transport systems of up to 50 miles are feasible for heat loads over 1500 MWt, and heat load density of over 130 MWt/mi/sup 2/is most suitable for nuclear applications. An incremental approach and a nuclear plant design provision for future heat extraction are recommended. Nuclear district heating technology status is discussed, particularly turbine design. Results of a study for retrofitting a major existing nuclear power plant to cogeneration operation are presented. The study indicates that for transmission distances up to 20 miles it is economical to generate and transport between 600 and 1200 MWt of district heat.

Roe, K.K.; Oliker, I.

1988-01-01T23:59:59.000Z

211

Optimal sizing study of hybrid wind/PV/diesel power generation unit  

SciTech Connect

In this paper, a methodology of sizing optimization of a stand-alone hybrid wind/PV/diesel energy system is presented. This approach makes use of a deterministic algorithm to suggest, among a list of commercially available system devices, the optimal number and type of units ensuring that the total cost of the system is minimized while guaranteeing the availability of the energy. The collection of 6 months of data of wind speed, solar radiation and ambient temperature recorded for every hour of the day were used. The mathematical modeling of the main elements of the hybrid wind/PV/diesel system is exposed showing the more relevant sizing variables. A deterministic algorithm is used to minimize the total cost of the system while guaranteeing the satisfaction of the load demand. A comparison between the total cost of the hybrid wind/PV/diesel energy system with batteries and the hybrid wind/PV/diesel energy system without batteries is presented. The reached results demonstrate the practical utility of the used sizing methodology and show the influence of the battery storage on the total cost of the hybrid system. (author)

Belfkira, Rachid; Zhang, Lu; Barakat, Georges [Groupe de Recherche en Electrotechnique et Automatique du Havre, University of Le Havre, 25 rue Philippe Lebon, BP 1123, 76063 Le Havre (France)

2011-01-15T23:59:59.000Z

212

Supporting Solar Power in Renewables Portfolio Standards: Experience from the United States  

SciTech Connect

Among the available options for encouraging the increased deployment of renewable electricity, renewables portfolio standards (RPS) have become increasingly popular. The RPS is a relatively new policy mechanism, however, and experience with its use is only beginning to emerge. One key concern that has been voiced is whether RPS policies will offer adequate support to a wide range of renewable energy technologies and applications or whether, alternatively, RPS programs will favor a small number of the currently least-cost forms of renewable energy. This report documents the design of and early experience with state-level RPS programs in the United States that have been specifically tailored to encourage a wider diversity of renewable energy technologies, and solar energy in particular. As shown here, state-level RPS programs specifically designed to support solar have already proven to be an important, albeit somewhat modest, driver for solar energy deployment, and those impacts are projected to continue to build in the coming years. State experience in supporting solar energy with RPS programs is mixed, however, and full compliance with existing requirements has not been achieved. The comparative experiences described herein highlight the opportunities and challenges of applying an RPS to specifically support solar energy, as well as the importance of policy design details to ensuring that program goals are achieved.

Wiser, Ryan; Barbose, Galen; Holt, Edward

2010-10-01T23:59:59.000Z

213

Titanium Enolates of Thiazolidinethione Chiral Auxiliaries: Versatile Tools for  

E-Print Network (OSTI)

extensively and are now an important and general method for asymmetric carbon-carbon bond forma- tion.1 of titanium tetrachloride and nature of the amine employed.3 However, more easily cleavable auxiliaries than by conversion of the amino alcohol to the thiazolidinethione by exposure to carbon disulfide and 1 M KOH6

214

ASSESSMENT OF THE RADIONUCLIDE COMPOSITION OF "HOT PARTICLES" SAMPLED IN THE CHERNOBYL NUCLEAR POWER PLANT FOURTH REACTOR UNIT  

SciTech Connect

Fuel-containing materials sampled from within the Chernobyl Nuclear Power Plant (ChNPP) 4th Reactor Unit Confinement Shelter were spectroscopically studied for gamma and alpha content. Isotopic ratios for cesium, europium, plutonium, americium, and curium were identified and the fuel burnup in these samples was determined. A systematic deviation in the burnup values based on the cesium isotopes, in comparison with other radionuclides, was observed. The conducted studies were the first ever performed to demonstrate the presence of significant quantities of {sup 242}Cm and {sup 243}Cm. It was determined that there was a systematic underestimation of activities of transuranic radionuclides in fuel samples from inside of the ChNPP Confinement Shelter, starting from {sup 241}Am (and going higher), in comparison with the theoretical calculations.

Farfan, E.; Jannik, T.; Marra, J.

2011-10-01T23:59:59.000Z

215

Effect on the condition of the metal in A K-300-3.5 turbine owing to multicycle fatigue from participation of a power generating unit in grid frequency and power regulation  

SciTech Connect

The effect on the condition of the rotor material owing to multicycle fatigue caused by variable stresses during participation of a power generating unit in grid frequency and power regulation is evaluated using the K-300-23.5 steam turbine as an example. It is shown that during normalized primary frequency regulation the safety factor is at least 50, while during automatic secondary regulation of frequency and power there is essentially no damage to the metal.

Lebedeva, A. I.; Zorchenko, N. V.; Prudnikov, A. A.

2011-09-15T23:59:59.000Z

216

Induced Radioactivity and Waste Classification of Reactor Zone Components of the Chernobyl Nuclear Power Plant Unit 1 After Final Shutdown  

SciTech Connect

The dismantlement of the reactor core materials and surrounding structural components is a major technical concern for those planning closure and decontamination and decommissioning of the Chernobyl Nuclear Power Plant (NPP). Specific issues include when and how dismantlement should be accomplished and what the radwaste classification of the dismantled system would be at the time it is disassembled. Whereas radiation levels and residual radiological characteristics of the majority of the plant systems are directly measured using standard radiation survey and radiochemical analysis techniques, actual measurements of reactor zone materials are not practical due to high radiation levels and inaccessibility. For these reasons, neutron transport analysis was used to estimate induced radioactivity and radiation levels in the Chernobyl NPP Unit 1 reactor core materials and structures.Analysis results suggest that the optimum period of safe storage is 90 to 100 yr for the Unit 1 reactor. For all of the reactor components except the fuel channel pipes (or pressure tubes), this will provide sufficient decay time to allow unlimited worker access during dismantlement, minimize the need for expensive remote dismantlement, and allow for the dismantled reactor components to be classified as low- or medium-level radioactive waste. The fuel channel pipes will remain classified as high-activity waste requiring remote dismantlement for hundreds of years due to the high concentration of induced {sup 63}Ni in the Zircaloy pipes.

Bylkin, Boris K. [Russian Research Center 'Kurchatov Institute' (Russian Federation); Davydova, Galina B. [Russian Research Center 'Kurchatov Institute' (Russian Federation); Zverkov, Yuri A. [Russian Research Center 'Kurchatov Institute' (Russian Federation); Krayushkin, Alexander V. [Russian Research Center 'Kurchatov Institute' (Russian Federation); Neretin, Yuri A. [Chernobyl Nuclear Power Plant (Ukraine); Nosovsky, Anatoly V. [Slavutych Division of the International Chernobyl Center (Ukraine); Seyda, Valery A. [Chernobyl Nuclear Power Plant (Ukraine); Short, Steven M. [Pacific Northwest National Laboratory (United States)

2001-10-15T23:59:59.000Z

217

Small modular reactors and the future of nuclear power in the United States  

Science Journals Connector (OSTI)

Abstract Small modular reactors are the latest “new” technology that nuclear advocates tout as the game changer that will overcome previous economic failures of nuclear power. The debate over \\{SMRs\\} has been particularly intense because of the rapid failure of large “nuclear renaissance” reactors in market economies, the urgent need to address climate change, and the dramatic success of alternative, decentralized resources in lowering costs and increasing deployment. This paper assesses the prospects for SMR technology from three perspectives: the implications of the history of cost escalation in nuclear reactor construction for learning, economies of scale and other process that SMR advocates claim will lower cost; the challenges SMR technology faces in terms of high costs resulting from lost economies of scale, long lead time needed to develop a new design, the size of the task to create assembly lines for modular reactors and intense concern about safety; and the cost and other characteristics – e.g. scalability, speed to market, flexibility, etc. – of available alternatives compared SMR technology. The paper concludes that the decision of the major vendors (Westinghouse and B&W) to dramatically reduce SMR development efforts reflects the severe disadvantages that SMR technology faces in the next several decades.

Mark Cooper

2014-01-01T23:59:59.000Z

218

Federal strategies to increase the implementation of combined heat and power technologies in the United States  

SciTech Connect

Recent interest in combined heat and power (CHP) is providing momentum to efforts aimed at increasing the capacity of this highly-efficient technology. Factors driving this increase in interest include the need to increase the efficiency of the nation's electricity generation infrastructure, DOE Assistant Secretary Dan Reicher's challenge to double the capacity of CHP by 2010, the success of DOE's Advanced Turbine Systems Program in supporting ultra-efficient CHP technologies, and the necessity of finding cost-effective solutions to address climate change and air quality issues. The federal government is committed to increasing the penetration of CHP technologies in the US. The ultimate goal is to build a competitive market for CHP in which policies and regulations support the implementation of a full suite of technologies for multiple applications. Specific actions underway at the federal level include technology strategies to improve CHP data collection and assessment and work with industry to encourage the development of advanced CHP technologies. Policy strategies include changes to federal environmental permitting procedures including CHP-friendly strategies in federal restructuring legislation, supporting tax credits and changes to depreciation requirements as economic incentives to CHP, working with industry to leverage resources in the development of advanced CHP technologies, educating state officials about the things they can do to encourage CHP, and increasing awareness about the benefits of CHP and the barriers limiting its increased implementation.

Laitner, J.; Parks, W.; Schilling, J.; Scheer, R.

1999-07-01T23:59:59.000Z

219

The Impact of Wind Power Projects on Residential Property Values in the United States: A Multi-Site Hedonic Analysis  

E-Print Network (OSTI)

2002) Economic Impacts of Wind Power in Kittitas County, WA.about Large Offshore Wind Power: Underlying Factors. EnergyOpinion on Offshore Wind Power - Interim Report. University

Hoen, Ben

2010-01-01T23:59:59.000Z

220

Preliminary Evaluation of the Section 1603 Treasury Grant Program for Renewable Power Projects in the United States  

E-Print Network (OSTI)

large wind power projects, the financing advantage providedestimate how Wind power projects have the advantage of beingall 40 wind power projects, the face value advantage of the

Bolinger, Mark

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Preliminary Evaluation of the Section 1603 Treasury Grant Program for Renewable Power Projects in the United States  

E-Print Network (OSTI)

Power Group, and Cielo Wind Power to Develop a 600 MW Windpower-group-and-cielo-wind-power-to- develop-a-600-mw-wind-

Bolinger, Mark

2012-01-01T23:59:59.000Z

222

Design, Construction and Performance of a Buck-Boost Converter for an Ultracapacitor-Based Auxiliary Energy System for Electric Vehicles  

E-Print Network (OSTI)

-Based Auxiliary Energy System for Electric Vehicles Micah OrtĂşzar, Juan Dixon (SM IEEE) and Jorge Moreno decades. Nevertheless, pure electric vehicles still have not achieved ranges comparable to that of gas powered conventional vehicles. This problem, due to the low energy density and specific energy contained

Catholic University of Chile (Universidad CatĂłlica de Chile)

223

Automatic and interactive e-Learning auxiliary material generation utilizing particle swarm optimization  

Science Journals Connector (OSTI)

The purpose of this research was to utilize a PSO-based algorithm, serial blog article composition particle swarm optimization (SBACPSO) algorithm, to automatically and intelligently generate auxiliary materials. Contrary to previous fixed content auxiliary ... Keywords: Auxiliary material, RSS, Serial blog articles composition particle swarm optimization, e-Learning

Tien-Chi Huang; Yueh-Min Huang; Shu-Chen Cheng

2008-11-01T23:59:59.000Z

224

The effect of high penetration of wind power on primary frequency control of power systems.  

E-Print Network (OSTI)

??In this work, a power system with wind power units and hydro power units are considered. The hydro power unit and variable speed wind turbine… (more)

Motamed, Bardia

2013-01-01T23:59:59.000Z

225

You will be hired in our Local Business Unit Substations (Power Systems Division) and, in the role of Service Sales Specialist, you will drive the  

E-Print Network (OSTI)

You will be hired in our Local Business Unit Substations (Power Systems Division) and, in the role and profitability targets for Substations Systems Your contact: Veronica Meloni, Talent Acquisition Department professionals. Requirements You have at least 2 or 3 years experience in the Substations segment and you have

Segatti, Antonio

226

Feasibility Assessment of the Water Energy Resources of the United States for New Low Power and Small Hydro Classes of Hydroelectric Plants: Main Report and Appendix A  

Energy.gov (U.S. Department of Energy (DOE))

Evaluates water energy resource sites identified in the resource assessment study reported in Water Energy Resources of the United States with Emphasis on Low Head/Low Power Resources, DOE/ID-11111, April 2004 to identify which could feasibly be developed using a set of feasibility criteria.

227

Feasibility Assessment of the Water Energy Resources of the United States for New Low Power and Small Hydro Classes of Hydroelectric Plants: Main Report and Appendix A  

Energy.gov (U.S. Department of Energy (DOE))

Main Report and Appendix A: Evaluates water energy resource sites identified in the resource assessment study reported in Water Energy Resources of the United States with Emphasis on Low Head/Low Power Resources, DOE/ID-11111, April 2004 to identify which could feasibly be developed using a set of feasibility criteria. The gross power potential of the sites estimated in the previous study was refined to determine the realistic hydropower potential of the sites using a set of development criteria assuming they are developed as low power (less than 1 MWa) or small hydro (between 1 and 30 MWa) projects.

228

Fuel Cell Engineering: Toward the Design of Efficient Electrochemical Power Plants  

Science Journals Connector (OSTI)

However, because of the fact that, similar to that observed with hydrogen, all these substances are not readily available as pure species in today’s fuel distribution networks, many research activities were started for converting conventional fuels (natural gas, gasoline, diesel, kerosene, coal) into hydrogen-rich gas mixtures for the operation of fuel cells. ... As illustrated in Figure 5, apart from the more exotic field of implantable devices, fuel cells can be used as electrical energy sources for portable systems in consumer electronics and military applications (with power outputs of 1?50 Wel), as auxiliary power units, e.g., for onboard electricity generation in cars, trucks, or aircrafts (with power outputs of 1?10 kWel), for traction of vehicles, buses, and submarines (with power outputs of cell units with a multi-stacked structure successfully operate a radio-controlled car (16.5 g), which demonstrates the potential of biofuel cells in practical applications. ...

Kai Sundmacher

2010-10-12T23:59:59.000Z

229

Preliminary Evaluation of the Section 1603 Treasury Grant Program for Renewable Power Projects in the United States  

E-Print Network (OSTI)

2010. pp. 17-22. Nevada Geothermal Power. 2010. “Faulkner 1both large wind and geothermal power projects. ? Section 3Name Enel Enel Nevada Geothermal Power Raser Total: Capacity

Bolinger, Mark

2012-01-01T23:59:59.000Z

230

Process-circuit and layout solutions for steam-turbine units and performance efficiency of thermal power plants  

Science Journals Connector (OSTI)

Criteria for evaluating process-circuit and layout solutions adopted in designing steam-turbine units are presented together with their values for a number of steam-turbine units produced by the Ural Turbine Work...

A. A. Gol’dberg; T. L. Shibaev

2014-12-01T23:59:59.000Z

231

Retrofitting the Strogino district heat supply station with construction of a 260-MW combined-cycle power plant (Consisting of two PGU-130 combined-cycle power units)  

Science Journals Connector (OSTI)

The retrofitting carried out at the Strogino district heat supply station and the specific features of works accomplished in the course of constructing the thermal power station based on a combined-cycle power pl...

V. F. Aleksandrov

2010-02-01T23:59:59.000Z

232

Auxiliary potential dependence of the Brueckner-Bethe-Goldstone theory  

Science Journals Connector (OSTI)

It is observed that unlike the versions which rely on auxiliary potentials designed to cancel diagrams exactly, the continuous version of the Brueckner-Bethe-Goldstone theory can be used to calculate the properties and in particular the ground state energy of repulsive many body systems. The only proviso amounts to a trivial requirement on the effective mass at the Fermi momentum. These results are related to those concerning the predictions of the corresponding versions of Green's function theory for the analytical properties of the mass operator. The case of attractive many body systems is also considered.

R. Sartor

1984-12-01T23:59:59.000Z

233

Enhancing VHTR passive safety and economy with thermal radiation based direct reactor auxiliary cooling system  

SciTech Connect

One of the most important requirements for Gen. IV Very High Temperature Reactor (VHTR) is passive safety. Currently all the gas cooled version of VHTR designs use Reactor Vessel Auxiliary Cooling System (RVACS) for passive decay heat removal. The RVACS can be characterized as a surface-based decay heat removal system. It is especially suitable for smaller power reactors since small systems have relatively larger surface area to volume ratio. However, RVACS limits the maximum achievable power level for modular VHTRs due to the mismatch between the reactor power (proportional to the core volume) and decay heat removal capability (proportional to the vessel surface area). Besides the safety considerations, VHTRs also need to be economical in order to compete with other reactor concepts and other types of energy sources. The limit of decay heat removal capability set by using RVACS has affected the economy of VHTRs. A potential alternative solution is to use a volume-based passive decay heat removal system, called Direct Reactor Auxiliary Cooling Systems (DRACS), to remove or mitigate the limitation on decay heat removal capability. DRACS composes of natural circulation loops with two sets of heat exchangers, one on the reactor side and another on the environmental side. For the reactor side, cooling pipes will be inserted into holes made in the outer or inner graphite reflector blocks. There will be gaps or annular regions formed between these cooling pipes and their corresponding surrounding graphite surfaces. Graphite has an excellent heat conduction property. By taking advantage of this feature, we can have a volume-based method to remove decay heat. The scalability can be achieved, if needed, by employing more rows of cooling pipes to accommodate higher decay heat rates. Since heat can easily conduct through the graphite regions among the holes made for the cooling pipes, those cooling pipes located further away from the active core region can still be very effective in removing decay heat. By removing the limit on the decay heat removal capability due to the limited available surface area as in a RVACS, the reactor power density and therefore the reactor power can be significantly increased, without losing the passive heat removal feature. This paper introduces the concept of using DRACS to enhance VHTR passive safety and economics. Three design options with different cooling pipe locations are discussed. Analysis results from a lumped volume based model and CFD simulations are presented. (authors)

Zhao, H.; Zhang, H.; Zou, L. [Idaho National Laboratory (United States); Sun, X. [Ohio State Univ. (United States)

2012-07-01T23:59:59.000Z

234

EIS-0092: Conversion to Coal, Holyoke Water Power Company, Mt. Tom Generating Station Unit 1 Holyoke, Hampden County, Massachusetts  

Energy.gov (U.S. Department of Energy (DOE))

The Economic Regulatory Administration prepared this statement to assess the environmental impacts of prohibiting Unit 1 of the Mt. Tom Generation Station Unit 1 from using either natural gas or petroleum products as a primary energy source, which would result in the utility burning low-sulfur coal.

235

CONFIRMATORY SURVEY RESULTS FOR PORTIONS OF THE MATERIALS AND EQUIPMENT FROM UNITS 1 AND 2 AT THE HUMBOLDT BAY POWER PLANT, EUREKA, CALIFORNIA  

SciTech Connect

The Pacific Gas & Electric Company (PG&E) operated the Humboldt Bay Power Plant (HBPP) Unit 3 nuclear reactor near Eureka, California under Atomic Energy Commission (AEC) provisional license number DPR-7. HBPP Unit 3 achieved initial criticality in February 1963 and began commercial operations in August 1963. Unit 3 was a natural circulation boiling water reactor with a direct-cycle design. This design eliminated the need for heat transfer loops and large containment structures. Also, the pressure suppression containment design permitted below-ground construction. Stainless steel fuel claddings were used from startup until cladding failures resulted in plant system contamination—zircaloy-clad fuel was used exclusively starting in 1965 eliminating cladding-related contamination. A number of spills and gaseous releases were reported during operations resulting in a range of mitigative activities (see ESI 2008 for details).

W.C. Adams

2011-04-01T23:59:59.000Z

236

E-Print Network 3.0 - auxiliary edge current Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

for Plasma in the Laboratory and Astrophysics Collection: Physics ; Plasma Physics and Fusion 4 Portland State University Auxiliary Funds and Other Self Support Funds including...

237

E-Print Network 3.0 - auxiliary cooling system Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Panels Summary: Heating System Preheat - Solar thermal 80-gal tank, electric auxiliary heating Active, indirect forced... -circulation system for cool climates Four solar thermal...

238

E-Print Network 3.0 - auxiliary naphtalene sulphonic Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

of chemical wastes, which required auxiliary fuel... in the measurements. All of the dispersants. listed above are lignin sulphonates of varying chemical purity Lignosol......

239

La Spezia power plant: Conversion of units 1 and 2 to combined cycle with modification of steam turbines from cross compound to tandem compound  

SciTech Connect

Units 1 and 2 of ENEL's La Spezia power plant, rated 310 and 325 MW respectively, are going to be converted to combined cycle. This project will be accomplished by integrating components such as gas turbines and HRSGs with some of the existing components, particularly the steam turbines, which are of the cross compound type. Since the total power of each converted unit has to be kept at 335 MW because of permitting limitations, the power delivered by the steam turbine will be limited to about 115 MW. For this reason a study was carried out to verify the possibility of having only one shaft and modifying the turbine to tandem compound. As additional investments are required for this modification, a balance was performed that also took into account the incremental heat rate and, on the other hand, the benefits from decreased maintenance and increased availability and reliability calculated for the expected useful life. The result of this balance was in favor of the modification, and a decision was taken accordingly. The turbine modification will involve replacing the whole HP section with a new combined HP-IP section while retaining the corresponding LP rotor and cylinder and making the needed changes in the valve arrangements and piping. Work on the site began in the spring of 1997 by dismantling the existing boiler so as to have the space needed to install the GTs and HRSGs. The first synchronization of the converted unit 1 is scheduled for November 1999

Magneschi, P.; Gabiccini, S.; Bracaloni, N.; Fiaschi, C.

1998-07-01T23:59:59.000Z

240

Power Development in Turkey  

Science Journals Connector (OSTI)

... 000 kw. steam power station, and the provision of switchgear, overhead lines and three substations for a transmission system about 16 km. in length. Provision is to be made ... will also be provided for stand-by service to the station auxiliaries. Transmission to the substation will be at 66,000 volts, the station output being stepped up to this ...

1940-06-08T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Suppression of harmonic perturbations and bifurcation control in tracking objectives of a boiler–turbine unit in power grid  

Science Journals Connector (OSTI)

In the presence of harmonic disturbances, boiler–turbine units may demonstrate quasi-periodic behaviour due to the occurrence of various types of bifurcation. In this article, a nonlinear model of boiler–turbine ...

Hamed Moradi; Gholamreza Vossoughi; Aria Alasty

2014-05-01T23:59:59.000Z

242

Grid Impacts of Wind Power Variability: Recent Assessments from a Variety of Utilities in the United States (Presentation)  

SciTech Connect

Presentation for the European Wind Energy Conference held February 27--March 2, 2006, in Athens, Greece, showing grid impacts of wind power variability.

Parsons, B.

2006-03-01T23:59:59.000Z

243

Development of an electric motor-driven pump unit for electro-hydraulic power steering with 42V power-Net  

Science Journals Connector (OSTI)

Motorization in vehicles is expanding rapidly for fuel efficiency, customer comfort, convenience, and safety features. These new electric loads represent an increase in the required electric power. This has gener...

J. Hur

2010-08-01T23:59:59.000Z

244

Technical safety requirements for the Auxiliary Hot Cell Facility (AHCF).  

SciTech Connect

These Technical Safety Requirements (TSRs) identify the operational conditions, boundaries, and administrative controls for the safe operation of the Auxiliary Hot Cell Facility (AHCF) at Sandia National Laboratories, in compliance with 10 CFR 830, 'Nuclear Safety Management.' The bases for the TSRs are established in the AHCF Documented Safety Analysis (DSA), which was issued in compliance with 10 CFR 830, Subpart B, 'Safety Basis Requirements.' The AHCF Limiting Conditions of Operation (LCOs) apply only to the ventilation system, the high efficiency particulate air (HEPA) filters, and the inventory. Surveillance Requirements (SRs) apply to the ventilation system, HEPA filters, and associated monitoring equipment; to certain passive design features; and to the inventory. No Safety Limits are necessary, because the AHCF is a Hazard Category 3 nuclear facility.

Seylar, Roland F.

2004-02-01T23:59:59.000Z

245

Large-Scale Offshore Wind Power in the United States: Assessment of Opportunities and Barriers, NREL (National Renewable Energy Laboratory)  

NLE Websites -- All DOE Office Websites (Extended Search)

ASSESSMENT OF ASSESSMENT OF OPPORTUNITIES AND BARRIERS September 2010 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or

246

Large area self-powered gamma ray detector. Phase 2, Development of a source position monitor for use on industrial radiographic units  

SciTech Connect

The purpose of this research was to develop a large area self-powered gamma detector (LASPGD) capable of detecting the movement of sealed radiation sources into and out of industrial radiographic units and to construct a prototype source position monitor (SPM) for these units utilizing the LASPGD. Prototype isotropic and directional LASPGDs, with solid and inert gas dielectrics, were developed and extensively tested using calibrated gamma sources (i.e., Cs-137, and Co-60). The sensitivities of the isotropic detectors, with inert gas dielectrics, were found to be approximately a factor of ten greater than those measured for the solid dielectric LASPGDs. Directionally sensitive self-powered detectors were found to exhibit a forward-to-back hemispherical sensitivity ratio of approximately 2 to 1. Industrial radiographic units containing Ir-192 sources with different activities were used to test the performance of the SPM. The SPM, which utilized a gas dielectric LASPGD, performed as designed. That is, the current generated in the LASPGD was converted to a voltage, amplified and used to control the on/off state of an incandescent lamp. The incandescent lamp, which functions as the source/out warning indicator, flashes at a rate of one flash per second when the source is in use (i.e. out of its shield).

LeVert, F.E. [K.E.M.P. Corp., Knoxville, TN (United States)

1994-01-01T23:59:59.000Z

247

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5 5 United States Department of Energy Southeastern Power Administration Wholesale Power Rate Schedule CC-1-I Availability: This rate schedule shall be available to public bodies and cooperatives served through the facilities of Carolina Power & Light Company, Western Division (hereinafter called the Customers). Applicability: This rate schedule shall be applicable to electric capacity and energy available from the Dale Hollow, Center Hill, Wolf Creek, Cheatham, Old Hickory, Barkley, J. Percy Priest, and Cordell Hull Projects (all of such projects being hereinafter called collectively the "Cumberland Projects") and sold in wholesale quantities. Character of Service: The electric capacity and energy supplied hereunder will be three-phase alternating

248

The effect of photoionization as an auxiliary discharge on characteristics of thermionic energy converter  

SciTech Connect

The cesium filled thermionic energy converters (TEC) operated by the ignited mode have been expected as novel electric power generators, suitable for the space power systems and such terrestrial uses as cogeneration devices. They have the advantage free from the maintenance because of the device without any moving parts. However, the gaps of the electrodes are usually kept less than 1 mm to suppress the negative space potential in the space between the electrodes. Furthermore, for the ignited mode operation, the emitter should be heated up to the temperature higher than 1700 K. Such a restriction and the operating condition should be relaxed to make TEC spread by manufacturing at a moderate price. In the present work, the effect of an auxiliary discharge due to the photoionization has been examined by using TEC operated by the unignited mode with a longer electrode gap, compared with conventional one. It is clarified that the space charge neutrality in the space between both electrodes is drastically improved by the irradiation of Xenon lamp in the case of the emitter temperature lower than 1100 K and that the output current increases by a few times, compared with one without irradiation. This is caused by the photoionized plasma whose density is nearly 10{sup 9} cm{sup -3}.

Furukawa, H.; Kando, M. [Shizuoka Univ., Hamamatsu (Japan); Yamada, J. [Aich Institute of Technology, Toyota (Japan)

1995-12-31T23:59:59.000Z

249

PTC, ITC, or Cash Grant? An Analysis of the Choice Facing Renewable Power Projects in the United States  

E-Print Network (OSTI)

loop biomass, and geothermal power, the inflation-adjustedas geothermal, microturbines, and combined heat and powerpower generated by certain types of renewable energy projects, including wind, closed- and open-loop biomass, geothermal,

Bolinger, Mark

2009-01-01T23:59:59.000Z

250

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

BP Energy Company BP Energy Company OE Docket No. EA- 3 14 Order Authorizing Electricity Exports to Mexico Order No. EA-3 14 February 22,2007 BP Energy Company Order No. EA-314 I. BACKGROUND Exports of electricity from the United States to a foreign country are regulated by the Department of Energy (DOE) pursuant to sections 301(b) and 402(Q of the Department of Energy Organization Act (42 U.S.C. 7 15 l(b), 7172(f)) and require authorization under section 202(e) of the Federal Power Act (FPA) (16 U.S.C.S24a(e)) . On May 22,2006, BP Energy Company (BP Energy) applied to DOE for an authorization to transmit electric energy from the United States to Mexico as a power marketer. BP Energy proposes to purchase surplus electric energy from electric utilities and other suppliers within the United States and to export that energy to ~Mexico. The cnergy

251

Specific activity of243Am and243Cm in the fuel of the 4th power-generating unit of the Chernobyl nuclear power plant  

Science Journals Connector (OSTI)

The activity ratios241Am/241Am.243Cm/244Cm, and242Cm/244Cm in core samples taken at the industrial site of the object “Cover” were measured. The content of243Am and243Cm in the fuel in the 4th power-generating un...

V. A. Ageev; S. L. Vyrichek; A. P. Lashko; T. N. Lashko; A. A. Odintsov

1999-11-01T23:59:59.000Z

252

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

United States Department of Energy Southeastern Power Administration Wholesale Power Rate Schedule JW-2-F Availability: This rate schedule shall be available to the Florida Power Corporation (or Progress Energy Florida, hereinafter called the Company). Applicability: This rate schedule shall be applicable to electric energy generated at the Jim Woodruff Project (hereinafter called the Project) and sold to the Company in wholesale quantities. Points of Delivery: Power sold to the Company by the Government will be delivered at the connection of the Company's transmission system with the Project bus. Character of Service: Electric power delivered to the Company will be three-phase alternating current at a nominal frequency of 60 cycles per second.

253

Technical evaluation of the noise and isolation testing of the safety features actuation system at the Davis Besse Nuclear Power Station, Unit 1  

SciTech Connect

This report documents the technical evaluation of the noise and isolation testing of the safety features actuation system at the Davis Besse Nuclear Power Station, Unit 1. The tests were to verify that faults on the non-Class 1E circuits would not propagate to the Class 1E circuits and degrade them below acceptable levels. The tests conducted demonstrated that the safety features actuation system did not degrade below acceptable levels nor was the system's ability to perform its protective functions affected.

Selan, J.C.

1981-07-01T23:59:59.000Z

254

Joint US/Russian study on the development of a decommissioning strategy plan for RBMK-1000 unit No. 1 at the Leningrad Nuclear Power Plant  

SciTech Connect

The objective of this joint U.S./Russian study was to develop a safe, technically feasible, economically acceptable strategy for decommissioning Leningrad Nuclear Power Plant (LNPP) Unit No. 1 as a representative first-generation RBMK-1000 reactor. The ultimate goal in developing the decommissioning strategy was to select the most suitable decommissioning alternative and end state, taking into account the socioeconomic conditions, the regulatory environment, and decommissioning experience in Russia. This study was performed by a group of Russian and American experts led by Kurchatov Institute for the Russian efforts and by the Pacific Northwest National Laboratory for the U.S. efforts and for the overall project.

NONE

1997-12-01T23:59:59.000Z

255

Big Bend Power Station Neural Network-Intelligent Sootblower (NN-ISB) Optimization  

NLE Websites -- All DOE Office Websites (Extended Search)

Big Bend Power Station neural network- Big Bend Power Station neural network- intelligent SootBlower (nn-iSB) oPtimization (comPleted) Project Description The overall goal of this project was to develop a Neural Network-Intelligent Sootblowing (NN-ISB) system on the 445 MW Tampa Electric Big Bend Unit #2 to initiate sootblowing in response to real-time events or conditions within the boiler rather than relying on general rule-based protocols. Other goals were to increase unit efficiency, reduce NO X , and improve stack opacity. In a coal-fired boiler, the buildup of ash and soot on the boiler tubes can lead to a reduction in boiler efficiency. Thus, one of the most important boiler auxiliary operations is the cleaning of heat-absorbing surfaces. Ash and soot deposits are removed by a process known as sootblowing, which uses mechanical devices for on-line cleaning

256

Survey records largest power generation order level in 20 year history  

SciTech Connect

With the rapid changes that are underway in the electric power generation business around the world, we expect that the diesel and gas turbine industry should anticipate continued strength and growth in the power generation markets for the rest of the 199Os and into the early part of the next century. This 20th year of the survey shows a total output level of 30000 MW for gas turbine generators for the first time. For reciprocating engine generators, this year`s survey shows orders of nearly 5000 units and a total output of almost 10000 MW, which are also record highs for the survey. Turning to the marine auxiliary generating unit survey and the newly separated diesel-electric marine propulsion data, we see an excellent growth pattern as well. This article briefly discusses the results of the survey.

Wadman, B.

1996-10-01T23:59:59.000Z

257

Bad bag detection systems installed on the COHPAC (Compact Hybrid Particulate Collector) at Alabama Power, E.C. Gaston Unit No.3  

SciTech Connect

In December of 1996, Alabama Power Company, a subsidiary of the Southern Company, began operating a baghouse in conjunction with an existing hot-side precipitator on the cold side of the air heaters. The concept combining an electrostatic precipitator and a baghouse is termed a COHPAC (Compact Hybrid Particulate Collector), an EPRI technology. The baghouse is installed on Unit No.3 which is a 280 Mwe pulverized coal fired unit. Unit No.3 shares a common stack with Unit No.4, so the baghouse treats 50% of the total stack flow. The installation has resulted in the ability of both boilers to operate without costly boiler load reductions, which were quite common prior to the installation of the COHPAC system because of stack capacity. To date, after nearly three years of operation the COHPAC system has meet and exceeded all performance expectations. The installation has consistently provided low outlet emissions (<0.01 lb/Mbtu) and low opacity levels. To date, there have not been any known bag failures and maintenance has been minimal. Testing has shown bag life to be finite but no data has been compiled on this type system showing the operating window that would ensure optimal performance. Mullen Burst tests have shown degradation in bag strength, which indicates that this degradation at some point could result in premature failure of the bags. The COHPAC system installed at E.G., Gaston includes over 2,000 bags corresponding to roughly 57,500 ft{sup 2} of collecting surface area. Current methods of finding damaged bags are quite laborious and time intensive. A system to monitor performance and locating damaged bags will be presented. Associated performance and overall historical operating data on Unit No.3 will also be presented.

Berry, M.S.; Harrison, W.; Corina, B.; Wilson, R.; Harrington, J.

1999-07-01T23:59:59.000Z

258

Transmission Business Unit Manager  

Energy.gov (U.S. Department of Energy (DOE))

(See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration Rocky Mountain Region Transmission Services, (J7300) Transmission Busiess Unit 615...

259

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tenaslta Power Services Co. Tenaslta Power Services Co. OE Docket No. EA-243-A Order Authorizing Electricity Exports to Canada Order No. EA-243-A March 1,2007 Tenaska Power Services Co. Order No. EA-243-A I. BACKGROUND Exports of elcctricity from the United States to a foreign country are regulated by the Department of Energy (DOE) pursuant to sections 30 I(b) and 402(f) of the Departrncnt of' Energy Organizatio~l Act (42 U, S.C. 7 15 1 (b), 7 1 72Cf)) and rcquirc authorization under section 202(e) of the Federal Power Act (FPA) ( Z 6 U. s.c.824a(e)j1. On August 16,2001, DOE issued Order No. EA-243 authorizing Tenaska Power Scrvices Co. (Tenaska) to transmit electric cncrgy from the United States to Canada as a power marketer. That authority expired on August 16,2003. On August 14,2006, Teilaska applied to renew the electricity export authority

260

Computational and experimental test of self starting regimes for the in-house needs of the PGU-450 steam-gas unit at the Kaliningrad TÉTs-2 Heating and Power Plant during supply disruptions  

Science Journals Connector (OSTI)

The major stages of a computational test of the self starting regimes for the in-house needs of unit No. 1 of the 450 MW steam-gas unit at the Kaliningrad TÉTs-2 Heating and Electric Power Plant during supply ...

S. N. Sakharov; V. A. Kuz’michev

2008-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

An adaptive load dispatching and forecasting strategy for a virtual power plant including renewable energy conversion units  

Science Journals Connector (OSTI)

Abstract The increasing awareness on the risky state of conventional energy sources in terms of future energy supply security and health of environment has promoted the research activities on alternative energy systems. However, due to the fact that the power production of main alternative sources such as wind and solar is directly related with meteorological conditions, these sources should be combined with dispatchable energy sources in a hybrid combination in order to ensure security of demand supply. In this study, the evaluation of such a hybrid system consisting of wind, solar, hydrogen and thermal power systems in the concept of virtual power plant strategy is realized. An economic operation-based load dispatching strategy that can interactively adapt to the real measured wind and solar power production values is proposed. The adaptation of the load dispatching algorithm is provided by the update mechanism employed in the meteorological condition forecasting algorithms provided by the combination of Empirical Mode Decomposition, Cascade-Forward Neural Network and Linear Model through a fusion strategy. Thus, the effects of the stochastic nature of solar and wind energy systems are better overcome in order to participate in the electricity market with higher benefits.

A. Tascikaraoglu; O. Erdinc; M. Uzunoglu; A. Karakas

2014-01-01T23:59:59.000Z

262

Near-Term Implications of a Ban on New Coal-Fired Power Plants in the United States  

Science Journals Connector (OSTI)

A national ban on new coal-fired power plants does not lead to CO2 reductions of the scale required under proposed federal legislation such as Lieberman-Warner but would greatly increase the fraction of time when natural gas sets the price of electricity, even with aggressive wind and demand response policies. ... In the demand response scenario, per capital demand growth is zero. ...

Adam Newcomer; Jay Apt

2009-04-27T23:59:59.000Z

263

Estimating the Capacity Value of Concentrating Solar Power Plants: A Case Study of the Southwestern United States  

SciTech Connect

We estimate the capacity value of concentrating solar power (CSP) plants without thermal energy storage in the southwestern U.S. Our results show that CSP plants have capacity values that are between 45% and 95% of maximum capacity, depending on their location and configuration. We also examine the sensitivity of the capacity value of CSP to a number of factors and show that capacity factor-based methods can provide reasonable approximations of reliability-based estimates.

Madaeni, S. H.; Sioshansi, R.; Denholm, P.

2012-05-01T23:59:59.000Z

264

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

E-T Global Energy, LLC E-T Global Energy, LLC OE Docket No. EA-381 Order Authorizing Electricity Exports to Mexico Order No. EA-381 June 10, 2011 I. BACKGROUND E-T Global Energy, LLC Order No. EA-381 Exports of electricity from the United States to a foreign country are regulated by the Department of Energy (DOE) pursuant to sections 301(b) and 402(f) of the Department ofEnergy Organization Act (42 U.S.C. 7151(b), 7172(f)) and require authorization under section 202(e) ofthe Federal Power Act (FPA) (16 U.S.C.824a(e)) 1 * On May 10,2011, DOE received an application from E-T Global Energy, LLC (E-T Global) for authority to transmit electric energy from the United States to Mexico for five years as a power marketer using existing international transmission facilities. E-

265

Auxiliary Cooling Loads in Passively Cooled Buildings: An Experimental Research Study  

E-Print Network (OSTI)

Solar Energy Center (FSEC) is examining the auxiliary cooling requirements of residences in warm, humid climates. The study addresses both the thermal and moisture response of buildings. A total of eight wall systems, three frame wall types and five...

Fairey, P.; Vieira, R.; Chandra, S.; Kerestecioglu, A.; Kalaghchy, S.

1984-01-01T23:59:59.000Z

266

E-Print Network 3.0 - auxiliary bus-bars routing Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Summary: and VV cooling systems, vacuum pumping and fueling systems, LHe auxiliary cold box, and to route bus-bars... to the tokamak using air-cooled aluminum or copper bus...

267

E-Print Network 3.0 - auxiliary feedwater isolation Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

reactor at water L2, 3,1 m, 2 x 25 kg... in the centre of the core fail to move Two trains of the auxiliary feedwater system start with capacity 2 x 25... kgs Water level L3...

268

Research of Fine Control Technology About the Tire Rubber Production Line Auxiliary Machine  

Science Journals Connector (OSTI)

Smelting auxiliary machine is an equipment which provide rubber matrix for tire rubber production. This paper describes a technology which’s ... powder state materials weighing automatic device on tire rubber production

Jin Chen; Rong-rong Zhang; Mao-lin Ji…

2014-01-01T23:59:59.000Z

269

CRADA Final Report for CRADA Number ORNL98-0521 : Development of an Electric Bus Inverter Based on ORNL Auxiliary Resonant Tank (ART) Soft-Switching Technology  

SciTech Connect

The Power Electronics and Electric Machinery Research Center (PEEMRC) of Oak Ridge National Laboratory (ORNL) has for many years been developing technologies for power converters for motor drives and many other applications. Some of the research goals are to improve efficiency and reduce audible and electromagnetic interference noise generation for inverters and the driven loads. The converters are being required to produce more power with reduced weight and volume, which requires improvements in heat removal from the electronics, as well as improved circuit designs that have fewer electrical losses. PEEMRC has recently developed and patented a soft-switching inverter topology called an Auxiliary Resonant Tank (ART), and this design has been tested and proven at ORNL using a 10-kW laboratory prototype. The objective of this project was to develop, test, and install the ART inverter technology in an electric transit bus with the final goal of evaluating performance of the ORNL inverter under field conditions in a vehicle. A scaled-up inverter with the capacity to drive a 22-e bus was built based on the 10-kW ORNL laboratory prototype ART soft-switching inverter. Most (if not all) commercially available inverters for traction drive and other applications use hard-switching inverters. A Cooperative Research and Development Agreement was established with the Chattanooga Area Regional Transit Authority (CARTA), the Electric Transit Vehicle Institute (ETVI), and Advanced Vehicle Systems (AVS), all of Chattanooga, along with ORNL. CARTA, which maintains and operates the public transit system in Chattanooga, provided an area for testing the vehicle alongside other similar vehicles in the normal operating environment. ETVI offers capabilities in standardized testing and reporting and also provides exposure in the electric transit vehicle arena for ORNL's technologies. The third Chattanooga partner, (AVS) manufactures all-electric and hybrid electric transit buses using inverter drive systems from several manufacturers. AVS provided help in field installation, and parts for laboratory testing. A 100-kW field-ready unit was developed, tested in an ORNL laboratory, and installed and successfully operated in a CARTA bus in Chattanooga. The tests on the vehicle were performed at a CARTA maintenance facility and at a l-mile test track in Chattanooga managed by CARTA.

Ayers, C.W.

2001-05-08T23:59:59.000Z

270

Analysis of the working process and mechanical losses in a Stirling engine for a solar power unit  

SciTech Connect

In this paper a second level mathematical model for the computational simulation of the working process of a 1-kW Stirling engine has been used and the results obtained are presented. The internal circuit of the engine in the calculation scheme was divided into five chambers, namely, the expansion space, heater, regenerator, cooler and the compression space, and the governing system of ordinary differential equations for the energy and mass conservation were solved in each chamber by Euler`s method. In addition, mechanical losses in the construction of the engine have been determined and the computational results show that the mechanical losses for this particular design of the Stirling engine may be up to 50% of the indicated power of the engine.

Makhkamov, K.K. [Uzbek Academy of Sciences, Tashkent (Uzbekistan). Physical and Technical Inst.; Ingham, D.B. [Univ. of Leeds (United Kingdom). Dept. of Applied Mathematics

1999-05-01T23:59:59.000Z

271

Community-Owned wind power development: The challenge of applying the European model in the United States, and how states are addressing that challenge  

E-Print Network (OSTI)

will simply sell the wind power to cooperative members asand sells power to Xcel under the small wind tariff. Thecommunity wind projects are currently selling power to the

Bolinger, Mark

2004-01-01T23:59:59.000Z

272

Ultra-high CO2 capture efficiency in CFB oxyfuel power plants by calcium looping process for CO2 recovery from purification units vent gas  

Science Journals Connector (OSTI)

Abstract This work presents a new option for the recovery of the CO2 losses from CO2 purification units in oxyfuel plants, by means of the Ca-looping process. The idea is to capture the CO2 in the vent stream from purification units by reaction with CaO sorbent in a carbonator reactor, where CaCO3 is formed. Sorbent is then regenerated in a calciner reactor by oxyfuel combustion of a fraction of the coal fed to the power plant. Since the Ca-looping process requires a continuous purge of exhaust sorbent and make-up of fresh limestone, the system is best coupled with a CFB boiler, where the exhausted Ca-rich sorbent can be used for in-furnace sulfur absorption. In this work, detailed mass and energy balances of the system proposed are reported, including a preliminary sizing of the reactors of the Ca-looping unit. A sensitivity analysis was also performed, by considering two types of coal as feed (mainly differing in sulfur content), two levels of non-condensable gases in the impure CO2 stream to be purified and different behaviors of the exhausted Ca-based sorbent injected in the CFB boiler, where it can experience different levels of recarbonation. Interesting results were obtained for this new system, which can capture about 90% of the CO2 vented from the purification unit in a reasonably compact reactors system, allowing an overall CO2 avoidance of the order of 99% with respect to conventional coal-fired steam plants without capture. As far as energy penalties are concerned, they were evaluated by the specific primary energy consumption for CO2 avoided index (SPECCA). Small differences with respect to reference oxyfuel plants without CO2 recovery were obtained, with either slightly better or slightly worse performances, depending on the sulfur content of the coal used. Penalties are associated to the export of CaO in the final exhausted sulfated sorbent from the CFB boiler, which increases when a higher sulfur coal is used. However, experimental analysis on the recarbonation level which can be attained by the CaL exhaust sorbent in the CFB boiler and further process optimization are needed to correctly account for these penalties and possibly minimize them.

Matteo C. Romano

2013-01-01T23:59:59.000Z

273

Southwestern Power Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

of four Power Marketing Administrations in the United States, Southwestern markets hydroelectric power in Arkansas, Kansas, Louisiana, Missouri, Oklahoma, and Texas from 24 U.S....

274

UC RIVERSIDE AUXILIARY AND SELF-SUPPORTING ENTERPRISES  

E-Print Network (OSTI)

commitment to supporting a grant the center received to convert a gasoline/diesel powered vehicle to electric * sustaining a well-patronized alternative transportation program to reduce single-occupant vehicle trips to the campus and carbon emissions from commuter vehicles * ensuring compliance to parking policy by issuing

Mills, Allen P.

275

E-Print Network 3.0 - auxiliary aerospace power Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

;Company Private 1 SYSTEMS INTEGRATION Presentation Abstract Airplanes and ... Source: Massachusetts Institute of Technology (MIT), Computer Science and Artificial Intelligence...

276

Map of the State Recognition of the Auxiliary Power Weight Exemption...  

Energy Savers (EERE)

Reduction, read the National Idle Reduction Network Newsletter or see the Alternative Fuel Data Center's Idle Reduction page. For more laws specific to idle reduction, see the...

277

E-Print Network 3.0 - auxiliary power study Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

of New York Collection: Biology and Medicine 12 Abstract-A hybrid cascaded multilevel inverter application for renewable energy resources including a reconfiguration Summary: the...

278

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7 7 United States Department of Energy Southeastern Power Administration Wholesale Power Rate Schedule CTV-1-H Availability: This rate schedule shall be available to the Tennessee Valley Authority (hereinafter called TVA). Applicability: This rate schedule shall be applicable to electric capacity and energy generated at the Dale Hollow, Center Hill, Wolf Creek, Old Hickory, Cheatham, Barkley, J. Percy Priest, and Cordell Hull Projects (all of such projects being hereafter called collectively the "Cumberland Projects") and the Laurel Project sold under agreement between the Department of Energy and TVA. Character of Service: The electric capacity and energy supplied hereunder will be three-phase alternating current at a frequency of approximately 60 hertz at the outgoing terminals of the Cumberland

279

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

United States Department of Energy Southeastern Power Administration Wholesale Power Rate Schedule CTVI-1-A Availability: This rate schedule shall be available to customers (hereinafter called the Customer) who are or were formerly in the Tennessee Valley Authority (hereinafter called TVA) service area. Applicability: This rate schedule shall be applicable to electric capacity and energy generated at the Dale Hollow, Center Hill, Wolf Creek, Old Hickory, Cheatham, Barkley, J. Percy Priest, and Cordell Hull Projects (all of such projects being hereafter called collectively the "Cumberland Projects") and the Laurel Project sold under agreement between the Department of Energy and the Customer. Character of Service: The electric capacity and energy supplied hereunder will be three-phase alternating

280

Hoechst plans Mexican unit  

SciTech Connect

Hoechst is considering plans to build its first ethoxylates project in Mexico, Mark Sijthoff, head of surfactants and auxiliaries for Hoechst`s specialty chemical business unit, tells CW. The company expects to make a decision on the 30,000-m.t./year project by the end of the year. Sijthoff would not disclose the site or where ethylene oxide (EO) feed would be obtained. The plan may depend on results of the privatization of Petroleos Mexicanos (Pemex), which is the only producer of EO in Mexico. Hoechst is part of a consortium bidding on the privatization. Sources say the unit will be built at Quimica Hoechst`s Coatzacoalcos site, close to Pemex`s EO plants at Cangregera and Morelos. A planned EO expansion at Morelos will probably move ahead when the sell-off is completed. Sijthoff says that Hoechst is also looking at improving its US surfactants position, although the company has no plans to expand ethoxylates, as there is {open_quotes}plenty of capacity.{close_quotes} Hoechst started up a 150-million lbs/year plant at Clear Lake, TX last year, ending a tolling agreement with Union Carbide. In addition, Rhone-Poulenc recently started a unit at Marcus Hook, PA, and Condea Vista is doubling its ethoxylation capacity at Lake Charles, LA. Meanwhile, Hoechst is still considering construction of 30,000-m.t./year ethoxylation plant in India or China. A decision is expected later this year.

Wood, A.; Alperowicz, N.

1996-05-22T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Unit Energy Europe AG | Open Energy Information  

Open Energy Info (EERE)

Hydro, Wind energy Product: Unit Energy develops and operates wind parks and hydroelectric power plants all across Europe. References: Unit Energy Europe AG1 This article...

282

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TexMex Energy, LLC TexMex Energy, LLC OE Docket No. EA-294-A Order Authorizing Electricity Exports to Mexico Order No. EA-294-A February 22, 2007 TexMex Energy, LLC Order No. EA-294-A I. BACKGROUND Exports of electricity from the United States to a foreign count~y are regulated by the Department of Energy (DOE) pursuant to sections 301(b) and 402(f) of the Department of Energy Organization Act (42 U.S.C. 7 15 1 (b), 71 72(f)) and require authorization under section 202(e) of the Federal Power Act (FPA) (16 U.S.C.824a(e)) . On August 25,2004, DOE issued Order No. EA-294 authorizing TexMex Energy LLC (TexMex) to transmit electric energy fiom the United States to Mexico as a power marketer. That authority expired on August 25, 2006. On September 8, 2006, TexMex applied to renew the electricity export authority

283

Energy Management in Olefins Units  

E-Print Network (OSTI)

to the point where waste heat from pyrolysis generates more than enough steam to power the olefins unit recovery section. Furthermore, incorporating gas turbine driven electrical generators or process compressors adds to the utility export potential of the unit...

Wells, T. A.

1982-01-01T23:59:59.000Z

284

90-MW single-shaft power generating steam-gas unit based on the GTÉ-65 gas turbine and K-30-60 steam turbine  

Science Journals Connector (OSTI)

This is an examination of a variant of the monoblock PGU-90 steam-gas unit developed at the “Leningradskii Metallicheskii Zavod” (LMZ) branch of “Silovye mashiny” based on a GTÉ-65 gas turbine unit and a K-30-...

A. S. Lebedev; O. V. Antonyuk; V. A. Mart’yanov…

2011-01-01T23:59:59.000Z

285

Study of plasma heating in ohmically and auxiliary heated regimes in spherical tokamak Globus-M.  

E-Print Network (OSTI)

Study of plasma heating in ohmically and auxiliary heated regimes in spherical tokamak Globus-M. N, Russia INTRODUCTION This paper describes the basic features of the plasma heating in spherical tokamak direction in the tokamak midplane. The beam axis was aimed into the inner plasma region at the radius R = 0

Boyer, Edmond

286

Discussions on Disposal Forms of Auxiliary Heat Source in Surface Water Heat Pump System  

E-Print Network (OSTI)

This paper presents two common forms of auxiliary heat source in surface water heat pump system and puts forward the idea that the disposal forms affect operation cost. It deduces operation cost per hour of the two forms. With a project...

Qian, J.; Sun, D.; Li, X.; Li, G.

2006-01-01T23:59:59.000Z

287

Sensor placement algorithm development to maximize the efficiency of acid gas removal unit for integrated gasification combined cycle (IGCC) power plant with CO{sub 2} capture  

SciTech Connect

Future integrated gasification combined cycle (IGCC) power plants with CO{sub 2} capture will face stricter operational and environmental constraints. Accurate values of relevant states/outputs/disturbances are needed to satisfy these constraints and to maximize the operational efficiency. Unfortunately, a number of these process variables cannot be measured while a number of them can be measured, but have low precision, reliability, or signal-to-noise ratio. In this work, a sensor placement (SP) algorithm is developed for optimal selection of sensor location, number, and type that can maximize the plant efficiency and result in a desired precision of the relevant measured/unmeasured states. In this work, an SP algorithm is developed for an selective, dual-stage Selexol-based acid gas removal (AGR) unit for an IGCC plant with pre-combustion CO{sub 2} capture. A comprehensive nonlinear dynamic model of the AGR unit is developed in Aspen Plus Dynamics® (APD) and used to generate a linear state-space model that is used in the SP algorithm. The SP algorithm is developed with the assumption that an optimal Kalman filter will be implemented in the plant for state and disturbance estimation. The algorithm is developed assuming steady-state Kalman filtering and steady-state operation of the plant. The control system is considered to operate based on the estimated states and thereby, captures the effects of the SP algorithm on the overall plant efficiency. The optimization problem is solved by Genetic Algorithm (GA) considering both linear and nonlinear equality and inequality constraints. Due to the very large number of candidate sets available for sensor placement and because of the long time that it takes to solve the constrained optimization problem that includes more than 1000 states, solution of this problem is computationally expensive. For reducing the computation time, parallel computing is performed using the Distributed Computing Server (DCS®) and the Parallel Computing® toolbox from Mathworks®. In this presentation, we will share our experience in setting up parallel computing using GA in the MATLAB® environment and present the overall approach for achieving higher computational efficiency in this framework.

Paul, P.; Bhattacharyya, D.; Turton, R.; Zitney, S.

2012-01-01T23:59:59.000Z

288

Sensor placement algorithm development to maximize the efficiency of acid gas removal unit for integrated gasifiction combined sycle (IGCC) power plant with CO2 capture  

SciTech Connect

Future integrated gasification combined cycle (IGCC) power plants with CO{sub 2} capture will face stricter operational and environmental constraints. Accurate values of relevant states/outputs/disturbances are needed to satisfy these constraints and to maximize the operational efficiency. Unfortunately, a number of these process variables cannot be measured while a number of them can be measured, but have low precision, reliability, or signal-to-noise ratio. In this work, a sensor placement (SP) algorithm is developed for optimal selection of sensor location, number, and type that can maximize the plant efficiency and result in a desired precision of the relevant measured/unmeasured states. In this work, an SP algorithm is developed for an selective, dual-stage Selexol-based acid gas removal (AGR) unit for an IGCC plant with pre-combustion CO{sub 2} capture. A comprehensive nonlinear dynamic model of the AGR unit is developed in Aspen Plus Dynamics® (APD) and used to generate a linear state-space model that is used in the SP algorithm. The SP algorithm is developed with the assumption that an optimal Kalman filter will be implemented in the plant for state and disturbance estimation. The algorithm is developed assuming steady-state Kalman filtering and steady-state operation of the plant. The control system is considered to operate based on the estimated states and thereby, captures the effects of the SP algorithm on the overall plant efficiency. The optimization problem is solved by Genetic Algorithm (GA) considering both linear and nonlinear equality and inequality constraints. Due to the very large number of candidate sets available for sensor placement and because of the long time that it takes to solve the constrained optimization problem that includes more than 1000 states, solution of this problem is computationally expensive. For reducing the computation time, parallel computing is performed using the Distributed Computing Server (DCS®) and the Parallel Computing® toolbox from Mathworks®. In this presentation, we will share our experience in setting up parallel computing using GA in the MATLAB® environment and present the overall approach for achieving higher computational efficiency in this framework.

Paul, P.; Bhattacharyya, D.; Turton, R.; Zitney, S.

2012-01-01T23:59:59.000Z

289

Auxiliary ECR heating system for the gas dynamic trap  

SciTech Connect

Physics aspects of a new system for electron cyclotron resonance heating (ECRH) at the magnetic mirror device Gas Dynamic Trap (GDT, Budker Institute, Novosibirsk) are discussed. This system based on two 400 kW/54.5 GHz gyrotrons is aimed at increasing the electron temperature up to the range 250-350 eV for improved energy confinement of hot ions. The key physical issue of the GDT magnetic field topology is that conventional ECRH geometries are not accessible. The proposed solution is based on a peculiar effect of radiation trapping in inhomogeneous magnetized plasma. Under specific conditions, oblique launch of gyrotron radiation results in generation of right-hand-polarized (R) electromagnetic waves propagating with high N{sub Double-Vertical-Line Double-Vertical-Line} in the vicinity of the cyclotron resonance layer, which leads to effective single-pass absorption of the injected microwave power. In the present paper, we investigate numerically an optimized ECRH scenario based on the proposed mechanism of wave propagation and discuss the design of the ECRH system, which is currently under construction at the Budker Institute.

Shalashov, A. G.; Gospodchikov, E. D.; Smolyakova, O. B.; Malygin, V. I. [Institute of Applied Physics of the Russian Academy of Sciences, Ulyanova St. 46, 603950 Nizhny Novgorod (Russian Federation); Bagryansky, P. A. [Budker Institute of Nuclear Physics of the Siberian Branch of the Russian Academy of Sciences, Akademika Lavrentieva Prospect 11, 630090 Novosibirsk (Russian Federation); Thumm, M. [Institut fuer Hochfrequenztechnik und Elektronik, Karlsruhe Institut fuer Technologie, Engesserstrasse 5, 76131 Karlsruhe (Germany)

2012-05-15T23:59:59.000Z

290

IMPROVING THE ENERGY EFFICIENCY OF A MID-SIZE POWER PLANT BY REDUCTION IN AUXILIARY POWER AND IMPROVED HEAT TRANSFER.  

E-Print Network (OSTI)

??This study incorporates the potential use of Variable Frequency Drives on various motors as well as areas of improved heat transfer in an older, mid-sized… (more)

Green, Jeffrey Andrew

2014-01-01T23:59:59.000Z

291

Heavy Vehicle Essential Power Systems Workshop  

SciTech Connect

Essential power is a crosscutting technology area that addresses the efficient and practical management of electrical and thermal requirements on trucks. Essential Power Systems: any function on the truck, that is not currently involved in moving the truck, and requires electrical or mechanical energy; Truck Lights; Hotel Loads (HVAC, computers, appliances, lighting, entertainment systems); Pumps, starter, compressor, fans, trailer refrigeration; Engine and fuel heating; and Operation of power lifts and pumps for bulk fluid transfer. Transition from ''belt and gear driven'' to auxiliary power generation of electricity - ''Truck Electrification'' 42 volts, DC and/ or AC; All electrically driven auxiliaries; Power on demand - manage electrical loads; Benefits include: increased fuel efficiency, reduced emission both when truck is idling and moving down the road.

Susan Rogers

2001-12-12T23:59:59.000Z

292

Scotrenewables Wind Power and Marine Power Ltd | Open Energy...  

Open Energy Info (EERE)

Wind Power and Marine Power Ltd Jump to: navigation, search Name: Scotrenewables Wind Power and Marine Power Ltd Place: Orkey, Scotland, United Kingdom Zip: KW16 3AW Sector:...

293

Parallel eigensolver for H(curl) problems using H1-auxiliary space AMG preconditioning  

SciTech Connect

This report describes an application of the recently developed H{sup 1}-auxiliary space preconditioner for H(curl) problems to the Maxwell eigenvalue problem. The auxiliary space method based on the new (HX) finite element space decomposition introduced in [7], was implemented in the hypre library, [10, 11] under the name AMS. The eigensolver considered in the present paper, referred to as the AME, is an extension of the AMS. It is based on the locally optimal block eigensolver LOBPCG [9] and the parallel AMG (algebraic multigrid) solver BoomerAMG [2] from the hypre library. AME is designed to compute a block of few minimal nonzero eigenvalues and eigenvectors, for general unstructured finite element discretizations utilizing the lowest order Nedelec elements. The main goal of the current report is to document the usage of AME and to illustrate its parallel scalability.

Kolev, T V; Vassilevski, P S

2006-11-15T23:59:59.000Z

294

API unit  

Science Journals Connector (OSTI)

API unit [An arbitrary unit of the American Petroleum Institute for measuring natural radioactivity; used in certain well logging methods] ? API-Einheit f

2014-08-01T23:59:59.000Z

295

Analysis of the operational reliability of a power-generating unit with a BN-600 reactor during the period 1980–1993  

Science Journals Connector (OSTI)

The high quality of the design and the additional improvements to separate units of the main equipment and systems at the initial stage of operation (first main circulation pump, steam generators, safety and c...

N. N. Oshkanov; A. G. Sheinkman; P. P. Govorov

1994-03-01T23:59:59.000Z

296

Development of a Laboratory Verified Single-Duct VAV System Model with Fan Powered Terminal Units Optimized Using Computational Fluid Dynamics  

E-Print Network (OSTI)

model identified key parameters required to conduct numerical simulations of FPTU and some of the internal components used to manufacture the units. One key internal component was a porous baffle used to enhance mixing when primary air and induced air...

Davis, Michael A.

2011-10-21T23:59:59.000Z

297

Crionaig Power Limited | Open Energy Information  

Open Energy Info (EERE)

Crionaig Power Limited Jump to: navigation, search Name: Crionaig Power Limited Place: United Kingdom Sector: Wind energy Product: Edinburgh-based power company developing wind...

298

High power-saving and fidelity-conserving object-based local dimming for LCD systems with LED-based backlight units  

Science Journals Connector (OSTI)

A local dimming technique which is enabled on LED-based LCD systems is expected to give more power saving than a global one. However, prior local dimming techniques have not considered human visual system-awareness much as done in an advanced global ... Keywords: Backlight dimming, Complexity, Fidelity, Human visual system, LED BLU-based LCD, Object-based local dimming, Power

Aldhino Anggorosesar, Young-Jin Kim

2014-09-01T23:59:59.000Z

299

TFTR neutral-beam power system  

SciTech Connect

The TFTR Neutral Beam Power System (NBPS) consists of the accelerator grid power supply and the auxiliary power supplies required to operate the TFTR 120-keV ion sources. The current configuration of the NBPS including the 11-MVA accelerator grid power supply and the Arc and Filament power supplies isolated for operation at accelerator grid voltages up to 120 kV, is described. The prototype NBPS has been assembled at the Princeton Plasma Physics Laboratory and has been operated. The results of the initial operation and the description and resolution of some of the technical problems encountered during the commissioning tests are presented.

Winje, R.A.

1982-10-01T23:59:59.000Z

300

Evaluation of potential severe accidents during low power and shutdown operations at Grand Gulf, Unit 1: Evaluation of severe accident risks for plant operational state 5 during a refueling outage. Supporting MELCOR calculations, Volume 6, Part 2  

SciTech Connect

To gain a better understanding of the risk significance of low power and shutdown modes of operation, the Office of Nuclear Regulatory Research at the NRC established programs to investigate the likelihood and severity of postulated accidents that could occur during low power and shutdown (LP&S) modes of operation at commercial nuclear power plants. To investigate the likelihood of severe core damage accidents during off power conditions, probabilistic risk assessments (PRAs) were performed for two nuclear plants: Unit 1 of the Grand Gulf Nuclear Station, which is a BWR-6 Mark III boiling water reactor (BWR), and Unit 1 of the Surry Power Station, which is a three-loop, subatmospheric, pressurized water reactor (PWR). The analysis of the BWR was conducted at Sandia National Laboratories while the analysis of the PWR was performed at Brookhaven National Laboratory. This multi-volume report presents and discusses the results of the BWR analysis. The subject of this part presents the deterministic code calculations, performed with the MELCOR code, that were used to support the development and quantification of the PRA models. The background for the work documented in this report is summarized, including how deterministic codes are used in PRAS, why the MELCOR code is used, what the capabilities and features of MELCOR are, and how the code has been used by others in the past. Brief descriptions of the Grand Gulf plant and its configuration during LP&S operation and of the MELCOR input model developed for the Grand Gulf plant in its LP&S configuration are given.

Kmetyk, L.N.; Brown, T.D. [Sandia National Labs., Albuquerque, NM (United States)

1995-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Excise Tax Exemption for Solar- or Wind-Powered Systems  

Energy.gov (U.S. Department of Energy (DOE))

Massachusetts law exempts any "solar or wind powered climatic control unit and any solar or wind powered water heating unit or any other type unit or system powered thereby," that qualifies for the...

302

EIS-0086: Conversion to Coal, New England Power Company, Salem Harbor Generating Station Units 1, 2, and 3 Salem, Essex County, Massachusetts  

Energy.gov (U.S. Department of Energy (DOE))

The Economic Regulatory Administration prepared this statement to assess the environmental impacts of prohibiting Units I, 2, and 3 of the Salem Harbor Generating Station from using either natural gas or petroleum products as a primary energy source, which would result in the utility burning low-sulfur coal.

303

Solar Power Purchase Agreements  

Energy.gov (U.S. Department of Energy (DOE))

Provides an overview of solar power purchase agreements including how they work, benefits and challenges and eligibility. Author: United States Environmental Protection Agency (EPA)

304

UNIT NUMBER:  

NLE Websites -- All DOE Office Websites (Extended Search)

193 UNIT NUMBER: 197 UNIT NAME: CONCRETE RUBBLE PILE (30) REGULATORY STATUS: AOC LOCATION: Outside plant security fence, north of the plant on Big Bayou Creek on private property....

305

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

7 UNIT NUMBER UNIT NAME Rubble oile 41 REGULATORY STATUS: AOC LOCATION: Butler Lake Dam, West end of Butler Lake top 20 ft wide, 10 ft APPROXIMATE DIMENSIONS: 200 ft long, base 30...

306

Parallel H1-based auxiliary space AMG solver for H(curl) problems  

SciTech Connect

This report describes a parallel implementation of the auxiliary space methods for definite Maxwell problems proposed in [4]. The solver, named AMS, extends our previous study [7]. AMS uses ParCSR sparse matrix storage and the parallel AMG (algebraic multigrid) solver BoomerAMG [1] from the hypre library. It is designed for general unstructured finite element discretizations of (semi)definite H(curl) problems discretized by Nedelec elements. We document the usage of AMS and illustrate its parallel scalability and overall performance.

Kolev, T V; Vassilevski, P S

2006-06-30T23:59:59.000Z

307

Experimental study on the operational and the cooling performance of the APR+ passive auxiliary feedwater system  

SciTech Connect

The passive auxiliary feedwater system (PAFS) is one of the advanced safety features adopted in the APR+ which is intended to completely replace the conventional active auxiliary feedwater system. The PAFS cools down the steam generator secondary side and eventually removes the decay heat from the reactor core by introducing a natural driving force mechanism; i.e., condensing steam in nearly-horizontal U-tubes submerged inside the passive condensation cooling tank (PCCT). With an aim of validating the cooling and operational performance of the PAFS, the separate effect test, PASCAL (PAFS Condensing Heat Removal Assessment Loop), is being performed to experimentally investigate the condensation heat transfer and natural convection phenomena in the PAFS. A single nearly-horizontal U-tube whose dimension is same as the prototypic U-tube of the APR+ PAFS is simulated in the PASCAL test. By performing the PASCAL test, the major thermal-hydraulic parameters such as local/overall heat transfer coefficients, fluid temperature inside the tube, wall temperature of the tube, and pool temperature distribution in the PCCT were produced not only to evaluate the current condensation heat transfer model but also to present database for the safety analysis related with the PAFS. (authors)

Kang, K. H.; Bae, B. U.; Kim, S.; Cho, Y. J.; Park, Y. S.; Kim, B. D. [Korea Atomic Energy Research Inst., 150 Dukjin-dong, Yuseong-gu, Daejeon (Korea, Republic of)

2012-07-01T23:59:59.000Z

308

TVA chooses nuclear power  

Science Journals Connector (OSTI)

TVA chooses nuclear power ... In giving the nod to a nuclear (over a coal) power generating station 10 days ago, TVA probably gave nuclear power its biggest boost to date. ... The $247 million nuclear power plant—a dual boiling-water reactor unit with a total capacity of 2.2 million kw(e).—will ...

1966-06-27T23:59:59.000Z

309

Power blackouts likely  

Science Journals Connector (OSTI)

... generating stations switch off if they cannot transmit their power. As power stations and transmission substations were knocked out, power was shifted to lines further down the network, causing them ... a map of the United States containing more than 14,000 generating, transmission and distribution substations, and over 19,000 connecting power lines. ...

Philip Ball

2004-01-20T23:59:59.000Z

310

Illinois Nuclear Profile - Power Plants  

U.S. Energy Information Administration (EIA) Indexed Site

Illinois nuclear power plants, summer capacity and net generation, 2010" Illinois nuclear power plants, summer capacity and net generation, 2010" "Plant name/total reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear net generation (percent)","Owner" "Braidwood Generation Station Unit 1, Unit 2","2,330","19,200",20.0,"Exelon Nuclear" "Byron Generating Station Unit 1, Unit 2","2,300","19,856",20.6,"Exelon Nuclear" "Clinton Power Station Unit 1","1,065","8,612",9.0,"Exelon Nuclear" "Dresden Generating Station Unit 2, Unit 3","1,734","14,593",15.2,"Exelon Nuclear" "LaSalle Generating Station

311

Power Tower | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

50 MW of power from CSP power towers are installed in the United States, Spain, and Germany. The SunShot Initiative funds (R&D) on power tower systems and related aspects within...

312

Enhancing the use of coals by gas reburning-sorbent injection: Volume 4 -- Gas reburning-sorbent injection at Lakeside Unit 7, City Water, Light and Power, Springfield, Illinois. Final report  

SciTech Connect

A demonstration of Gas Reburning-Sorbent Injection (GR-SI) has been completed at a cyclone-fired utility boiler. The Energy and Environmental Research Corporation (EER) has designed, retrofitted and tested a GR-SI system at City Water Light and Power`s 33 MWe Lakeside Station Unit 7. The program goals of 60% NO{sub x} emissions reduction and 50% SO{sub 2} emissions reduction were exceeded over the long-term testing period; the NO{sub x} reduction averaged 63% and the SO{sub 2} reduction averaged 58%. These were achieved with an average gas heat input of 22% and a calcium (sorbent) to sulfur (coal) molar ratio of 1.8. GR-SI resulted in a reduction in thermal efficiency of approximately 1% at full load due to firing natural gas which forms more moisture in flue gas than coal and also results in a slight increase in air heater exit gas temperature. Minor impacts on other areas of unit performance were measured and are detailed in this report. The project at Lakeside was carried out in three phases, in which EER designed the GR-SI system (Phase 1), completed construction and start-up activities (Phase 2), and evaluated its performance with both short parametric tests and a long-term demonstration (Phase 3). This report contains design and technical performance data; the economics data for all sites are presented in Volume 5.

NONE

1996-03-01T23:59:59.000Z

313

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

174 10 12 92 UNIT NAME: C-745-K Low Level Storage Area REGULATORY STAU: -AOC LOCATION: Inside Security Fence , South of C-333 Cascade Building. APPROXIMATE...

314

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

4 UNIT NAME C-611 Underaround Diesel Tank REGULATORY STATUS: AOC LOCATION: Immediately southeast of C-611 APPROXIMATE DIMENSIONS: 1000 gallon FUNCTION: Diesel storage OPERATIONAL...

315

UNIT NUMBER:  

NLE Websites -- All DOE Office Websites (Extended Search)

7 KOW Toluene SDill Area UNIT NAME: REGULATORY STATUS: AOC LOCATION: Southwest of plant site APPROXIMATE DIMENSIONS: 200 feet wide by 800 feet ong FUNCTION: Storage of Toluene...

316

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

9 UNIT NAME C-746-Al REGULATORY STATUS: AOC LOCATION: Northwest corner of C-746-A APPROXIMATE DIMENSIONS: 4000 gallons FUNCTION: Underground storage tanks OPERATIONAL STATUS:...

317

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

1 UNIT NAME C-611 Underaround Gasoline Tank REGULATORY STATUS: AOC LOCATION: Immediately east of C-61l APPROXIMATE DIMENSIONS: 50 ga on FUNCTION: Gasoline storage OPERATIONAL...

318

Life Cycle Environmental Impacts Resulting from the Manufacture of the Heliostat Field for a Reference Power Tower Design in the United States: Preprint  

SciTech Connect

Life cycle assessment (LCA) is recognized as a useful analytical approach for quantifying environmental impacts of renewable energy technologies, including concentrating solar power (CSP). An LCA accounts for impacts from all stages in the development, operation, and decommissioning of a CSP plant, including such upstream stages as the extraction of raw materials used in system components, manufacturing of those components, and construction of the plant. The National Renewable Energy Laboratory is conducting a series of LCA studies for various CSP technologies. This paper contributes to a thorough LCA of a 100 MWnet molten salt power tower CSP plant by estimating the environmental impacts resulting from the manufacture of heliostats. Three life cycle metrics are evaluated: greenhouse gas emissions, water consumption, and cumulative energy demand. The heliostat under consideration (the 148 m2 Advanced Thermal Systems heliostat) emits 5,300 kg CO2eq, consumes 274 m3 of water, and requires 159,000 MJeq during its manufacture. Future work will incorporate the results from this study into the LCA model used to estimate the life cycle impacts of the entire 100 MWnet power tower CSP plant.

Heath, G.; Burkhardt, J.; Turchi, C.

2012-10-01T23:59:59.000Z

319

Sandia National Laboratories: Portable Hydrogen Fuel-Cell Unit...  

NLE Websites -- All DOE Office Websites (Extended Search)

Green, Sustainable Power to Honolulu Port Portable Hydrogen Fuel-Cell Unit to Provide Green, Sustainable Power to Honolulu Port Solar Glare Hazard Analysis Tool Available for...

320

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1-B 1-B Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Virginia to whom power may be transmitted and scheduled pursuant to contracts between the Government, American Electric Power Service Corporation (hereinafter called the Company), the Company's Transmission Operator, currently PJM Interconnection LLC (hereinafter called PJM), and the Customer. This rate schedule is applicable to customers receiving power from the Government on an arrangement where the Company schedules the power and provides the Customer a credit on their bill for Government power. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy Southeastern Power Administration Wholesale Power Rate Schedule CP&L-2-B Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in North Carolina and South Carolina to whom power may be transmitted pursuant to contracts between the Government and Carolina Power & Light Company (hereinafter called the Company) and the Customer. The Customer has chosen to self-schedule and does not receive Government power under an arrangement where the Company schedules the power and provides a credit on the Customer's bill for Government power. The Customer is responsible for providing a scheduling arrangement with the Government. The Government is

322

Auxiliary rank-3 "massless" spin-2 field in de Sitter space  

E-Print Network (OSTI)

In Ref. \\cite{binegar}, from the group theoretical point of view, it was shown that the linear conformal gravity can be written in terms of a mixed symmetry tensor field of rank-3. It was proved that this kind of tensor field in de Sitter background associates with two unitary irreducible representations (UIR) of the de Sitter group. The important fact is that one of the them has a flat limit, namely, in zero curvature coincides to the UIR of Poincar\\'e group which has been studied in Ref. \\cite{fatemi}. However, the second one which is named as auxiliary field, becomes significant in the study of conformal gravity in de Sitter background. In this paper we will study the second representation in details by finding its field equations, solutions and also the conformally invariant two-point function.

Elmizadeh, Marjan

2015-01-01T23:59:59.000Z

323

Stripping of organic compounds from wastewater as an auxiliary fuel of regenerative thermal oxidizer  

Science Journals Connector (OSTI)

Organic solvents with different volatilities are widely used in various processes and generate air and water pollution problems. In the cleaning processes of electronics industries, most volatile organic compounds (VOCs) are vented to air pollution control devices while most non-volatile organic solvents dissolve in the cleaning water and become the major sources of COD in wastewater. Discharging a high-COD wastewater stream to wastewater treatment facility often disturbs the treatment performance. A pretreatment of the high-COD wastewater is therefore highly desirable. This study used a packed-bed stripping tower in combination with a regenerative thermal oxidizer to remove the COD in the wastewater from a printed circuit board manufacturing process and to utilize the stripped organic compounds as the auxiliary fuel of the RTO. The experimental results showed that up to 45% of the COD could be removed and 66% of the RTO fuel could be saved by the combined treatment system.

Meng-Wen Chang; Jia-Ming Chern

2009-01-01T23:59:59.000Z

324

An Auxiliary-Field Quantum Monte Carlo Study of the Chromium Dimer  

E-Print Network (OSTI)

The chromium dimer (Cr2) presents an outstanding challenge for many-body electronic structure methods. Its complicated nature of binding, with a formal sextuple bond and an unusual potential energy curve, is emblematic of the competing tendencies and delicate balance found in many strongly correlated materials. We present a near-exact calculation of the potential energy curve (PEC) and ground state properties of Cr2, using the auxiliary-field quantum Monte Carlo (AFQMC) method. Unconstrained, exact AFQMC calculations are first carried out for a medium-sized but realistic basis set. Elimination of the remaining finite-basis errors and extrapolation to the complete basis set (CBS) limit is then achieved with a combination of phaseless and exact AFQMC calculations. Final results for the PEC and spectroscopic constants are in excellent agreement with experiment.

Purwanto, Wirawan; Krakauer, Henry

2014-01-01T23:59:59.000Z

325

Modeling a short dc discharge with thermionic cathode and auxiliary anode  

SciTech Connect

A short dc discharge with a thermionic cathode can be used as a current and voltage stabilizer, but is subject to current oscillation. If instead of one anode two anodes are used, the current oscillations can be reduced. We have developed a kinetic model of such a discharge with two anodes, where the primary anode has a small opening for passing a fraction of the discharge current to an auxiliary anode. The model demonstrates that the current-voltage relationship of the discharge with two anodes is characterized everywhere by positive slope, i.e., positive differential resistance. Therefore, the discharge with two anodes is expected to be stable to the spontaneous oscillation in current that is induced by negative differential resistance. As a result, such a discharge can be used in an engineering application that requires stable plasma, such as a current and voltage stabilizer.

Bogdanov, E. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation) [St. Petersburg State University, St. Petersburg 199034 (Russian Federation); University ITMO, Kronverkskiy pr. 49, St. Petersburg 197101 (Russian Federation); Demidov, V. I. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation) [St. Petersburg State University, St. Petersburg 199034 (Russian Federation); West Virginia University, Morgantown, West Virginia 26506 (United States); Kaganovich, I. D. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States)] [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States); Koepke, M. E. [West Virginia University, Morgantown, West Virginia 26506 (United States)] [West Virginia University, Morgantown, West Virginia 26506 (United States); Kudryavtsev, A. A. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation)] [St. Petersburg State University, St. Petersburg 199034 (Russian Federation)

2013-10-15T23:59:59.000Z

326

Investigation of the Potential for Biofuel Blends in Residual Oil-Fired Power Generation Units as an Emissions Reduction Strategy for New York State  

SciTech Connect

There is a significant amount of oil, about 12.6 million barrels per year, used for power generation in New York State. The majority of it is residual oil. The primary reason for using residual oil probably is economic, as these fuels are cheaper than distillates. However, the stack emissions from the use of such fuels, especially in densely populated urban areas, can be a cause for concern. The emissions of concern include sulfur and nitrogen oxides and particulates, particularly PM 2.5. Blending with distillate (ASTM No.2) fuels may not reduce some or all of these emissions. Hence, a case can be made for blending with biofuels, such as biodiesel, as they tend to have very little fuel bound sulfur and nitrogen and have been shown in prior work at Brookhaven National Laboratory (BNL) to reduce NOx emissions as well in small boilers. Some of the research carried out at CANMET in Canada has shown potential reductions in PM with blending of biodiesel in distillate oil. There is also the benefit obtaining from the renewable nature of biofuels in reducing the net carbon dioxide emitted thus contributing to the reduction of green house gases that would otherwise be emitted to the atmosphere. The present project was conceived to examine the potential for such benefits of blending biofuels with residual oil. A collaboration was developed with personnel at the New York City Poletti Power Plant of the New York Power Authority. Their interest arose from an 800 MW power plant that was using residual oil and which was mandated to be shut down in 2010 because of environmental concerns. A blend of 20% biodiesel in residual oil had also been tested for a short period of about two days in that boiler a couple of years back. In this project, emission measurements including particulate measurements of PM2.5 were made in the commercial boiler test facility at BNL described below. Baseline tests were done using biodiesel as the blending biofuel. Biodiesel is currently and probably in the foreseeable future more expensive than residual fuel. So, another task was to explore potential alternative biofuels that might confer emission benefits similar to those of biodiesel, while being potentially significantly cheaper. Of course, for power plant use, availability in the required quantities is also a significant criterion. A subsidiary study to determine the effect of the temperature of the filter used to collect and measure the PM 2.5 emissions was conducted. This was done for reasons of accuracy in a residential boiler using distillate fuel blends. The present report details the results obtained in these tests with the baseline ASTM No. 6 fuel and blends of biodiesel with it as well as the results of the filter temperature study. The search for the alternative 'cheaper' biofuel identified a potential candidate, but difficulties encountered with the equipment during the testing prevented testing of the alternative biofuel.

Krishna, C.R.; McDonald, R.

2009-05-01T23:59:59.000Z

327

Power Spectrum in Krein Space Quantization  

E-Print Network (OSTI)

The power spectrum of scalar field and space-time metric perturbations produced in the process of inflation of universe, have been presented in this paper by an alternative approach to field quantization namely, Krein space quantization [1,2]. Auxiliary negative norm states, the modes of which do not interact with the physical world, have been utilized in this method. Presence of negative norm states play the role of an automatic renormalization device for the theory.

M. Mohsenzadeh; S. Rouhani; M. V. Takook

2008-11-06T23:59:59.000Z

328

Accelerating CHP Deployment, United States Energy Association (USEA), August 2011  

Energy.gov (U.S. Department of Energy (DOE))

An Industry Consultation by the United States Energy Association (USEA) on Accelerating Combined Heat and Power (CHP) Deployment

329

United States  

Office of Legacy Management (LM)

- I - I United States Department of Energy D lSCk Al M E R "This book was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency

330

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

5 UNIT NAME C-333 North Side PCB Soil Contamination REGULATORY STATUS: AOC LOCATION: North side of C-333 Building APPROXIMATE OIMENSIONS: 150 ft by 100 ft FUNCTION: Dust Palliative...

331

UNIT NUMBER:  

NLE Websites -- All DOE Office Websites (Extended Search)

4 KPDES Outfall Ditch 017 Flume- Soil Backfill UNIT NAME: - REGULATORY STATUS: AOC LOCATION: South of plant on the west side of the access road APPROXIMATE DIMENSIONS: 30 feet wide...

332

UNIT NUMBER:  

NLE Websites -- All DOE Office Websites (Extended Search)

2 C-617-A Sanitarv Waterline- Soil Backfill UNIT NAME: - REGULATORY STATUS: AOC LOCATION: Between southeast corner of C-531 Switchyard and C-617-A Water Treatment Facility. 4 feet...

333

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

1 UNIT NAME C-720 Inactive TCE Oegreaser REGULATORY STATUS: AOC LOCATION: C-720 Building APPROXIMATE DIMENSIONS: Approx. 10 ft by 10 ft by 20 f1: deep FUNCTION: Used for cleaning...

334

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

2 UNIT NAME Rubble Dile 46 REGULATORY STATUS: AOC LOCATION: 2000 ft southwest of curve on Kentucky Highway 473- near east end of Mitchell Lake APPROXIMATE DIMENSIONS: About 100 ft...

335

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

1 UNIT NAME Rubble oile 45 REGULATORY STATUS AOC LOCATION: West end of Mitche Lake APPROXIMATE DIMENSIONS: 2000 ft long, ft thick 4 ft wide FUNCTION: Control erosion on face of dam...

336

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

9 UNIT NAME Rubble Dile 43 REGULATORY STATUS: AOC LOCATION: West end of Happy Ho ow Lake APPROXIMATE DIMENSIONS: 200 ft long by 4 ft wide -concrete 4-6 in thickness FUNCTION:...

337

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

6 UNIT NAME C-740 TCE Soill Site REGULATORY STATUS: AOC LOCATION: Northwest corner C-740 concrete pad area) APPROXIMATE DIMENSIONS: 5 ft by 5 ft spill FUNCTION: Drum storage area...

338

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

8 C-I00 South Side Berms UNIT NAME REGULATORY STATUS: AOC LOCATION: South Side C-IOO APPROXIMATE DIMENSIONS: 2 berms approximately 200 ft long by SO ft wide eac FUNCTION:...

339

UNIT NUMBER:  

NLE Websites -- All DOE Office Websites (Extended Search)

3 UNIT NAME: C-331 PCB Soil Contamination -West Side REGULATORY STATUS: AOC LOCATION: West side C-331 building APPROXIMATE DIMENSIONS: 100 feet wide by 420 feet long FUNCTION: Dust...

340

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

3 C-750B Diesel UST UNIT NAME REGULATORY STATUS: AOC LOCATION: Southeast corner of C-750 APPROXIMATE DIMENSIONS: 10,000 gallon FUNCTION: Diesel storage OPERATIONAL STATUS: Removed...

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

5 UNIT NAME C-633 PCB So111 Site REGULATORY STATUS CERCLA LOCATION C-633 Transformer area (Mac location 75) APPROXIMATE DIMENSIONS I Unknown FUNCTION Soill site OPERATIONAL STATUS...

342

ARE WE LOSING OUT IN NUCLEAR POWER?  

Science Journals Connector (OSTI)

ARE WE LOSING OUT IN NUCLEAR POWER? ... The question of whether the United States is losing its commanding position in the development of nuclear power is no exception. ...

WALTER J. MURPHY

1956-07-02T23:59:59.000Z

343

Sandia National Laboratories: multiscale concentrated solar power  

NLE Websites -- All DOE Office Websites (Extended Search)

concentrated solar power Solar Energy Research Institute for India and the United States Kick-Off On November 27, 2012, in Concentrating Solar Power, Energy, National Solar Thermal...

344

Tilbury Green Power | Open Energy Information  

Open Energy Info (EERE)

Name: Tilbury Green Power Place: United Kingdom Sector: Biomass Product: UK based Tilbury Green Power is a 100% subsidiary of Express Energy Holdings, developing biomass fired...

345

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MISS-1-N MISS-1-N Availability: This rate schedule shall be available to the South Mississippi Electric Power Association (hereinafter called the Customer) to whom power may be wheeled pursuant to contracts between the Government and PowerSouth Energy Cooperative (hereinafter called PowerSouth). Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters and Richard B. Russell Projects and sold under appropriate contracts between the Government and the Customer. This rate schedule does not apply to energy from pumping operations at the Carters and Richard B. Russell Projects.

346

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-B 2-B Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Virginia to whom power may be transmitted pursuant to contracts between the Government, American Electric Power Service Corporation (hereinafter called the Company), the Company's Transmission Operator, currently PJM Interconnection LLC (hereinafter called PJM), and the Customer. The Customer has chosen to self-schedule and does not receive Government power under an arrangement where the Company schedules the power and provides a credit on the Customer's bill for Government power. The Customer is responsible for providing a scheduling arrangement with the Government. The Government is responsible for arranging transmission with the Company. Nothing in this

347

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-B 2-B Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Virginia and North Carolina to whom power may be transmitted pursuant to contracts between the Government, Virginia Electric and Power Company (hereinafter called the Company), the Company's Transmission Operator, currently PJM Interconnection LLC (hereinafter called PJM), and the Customer. The Customer has chosen to self-schedule and does not receive Government power under an arrangement where the Company schedules the power and provides a credit on the Customer's bill for Government power. The Customer is responsible for providing a scheduling arrangement with the Government. The Government is responsible for arranging transmission with the Company and PJM.

348

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1-B 1-B Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in North Carolina and South Carolina to whom power may be transmitted and scheduled pursuant to contracts between the Government and Carolina Power & Light Company (hereinafter called the Company) and the Customer. This rate schedule is applicable to customers receiving power from the Government on an arrangement where the Company schedules the power and provides the Customer a credit on their bill for Government power. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to elect service under another rate schedule. Applicability:

349

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

VA-1-B VA-1-B Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Virginia and North Carolina to whom power may be transmitted and scheduled pursuant to contracts between the Government, Virginia Electric and Power Company (hereinafter called the Company), the Company's Transmission Operator, currently PJM Interconnection LLC (hereinafter called PJM), and the Customer. This rate schedule is applicable to customers receiving power from the Government on an arrangement where the Company schedules the power and provides the Customer a credit on their bill for Government power. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow

350

Transient thermal analysis of a space reactor power system  

E-Print Network (OSTI)

Thermoelectric Power Conversion Module Heat Pipe Radiator Module . Auxiliary Modules . Flow of Calculation . Transient Test Cases Studied Summary . 10 10 CHAPTER II. ENERGY EQUATION FINITE DIFFERENCING . . 12 Energy Equation for a Solid Finite..., but this stud~ uses a generic liquid metal cooled fast reactor concept as the model to test the code. The space power svstem to be modeled consists of a liquid lithium cooled fast reactor, primarv and secondary loops svith a sell-induced thermoelectric...

Gaeta, Michael J.

1988-01-01T23:59:59.000Z

351

United States  

Office of Legacy Management (LM)

Office of Research and EPA 600/R-941209 Environmental Protection Development January 1993 Agency Washington, DC 20460 Offsite Environmental 57,,7 Monitoring Report Radiation Monitoring Around United States Nuclear Test Areas, Calendar Year 1992 UNITED STATES ENVIRONMENTAL PROTECTION AGENCY OFFICE OF RESEARCH AND DEVELOPMENT ENVIRONMENTAL MONITORING SYSTEMS LABORATORY-LAS VEGAS P.O. BOX 93478 LAS VEGAS. NEVADA 891 93-3478 702/798-2100 Dear Reader: Since 1954, the U.S. Environmental Protection Agency (EPA) and its predecessor the U.S, Public Health Service (PHs) has conducted radiological monitoring in the offsite areas around United States nuclear test areas. The primary objective of this monitoring has been the protection of the health and safety of

352

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-B 3-B Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Virginia to whom power may be scheduled pursuant to contracts between the Government, American Electric Power Service Corporation (hereinafter called the Company), PJM Interconnection LLC (hereinafter called PJM), and the Customer. The Government is responsible for providing the scheduling. The Customer is responsible for providing a transmission arrangement. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to elect service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and

353

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4-B 4-B Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in North Carolina and South Carolina served through the transmission facilities of Carolina Power & Light Company (hereinafter called the Company). The Customer has chosen to self-schedule and does not receive Government power under an arrangement where the Company schedules the power and provides a credit on the Customer's bill for Government power. The Customer is responsible for providing a scheduling arrangement with the Government and for providing a transmission arrangement. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to

354

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4-B 4-B Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Virginia served through the facilities of American Electric Power Service Corporation (hereinafter called the Company) and PJM Interconnection LLC (hereinafter called PJM). The Customer has chosen to self- schedule and does not receive Government power under an arrangement where the Company schedules the power and provides a credit on the Customer's bill for Government power. The Customer is responsible for providing a scheduling arrangement with the Government and for providing a transmission arrangement. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to elect service under another rate schedule.

355

Preliminary safety analysis report for the Auxiliary Hot Cell Facility, Sandia National Laboratories, Albuquerque, New Mexico  

SciTech Connect

The Auxiliary Hot Cell Facility (AHCF) at Sandia National Laboratories, New Mexico (SNL/NM) will be a Hazard Category 3 nuclear facility used to characterize, treat, and repackage radioactive and mixed material and waste for reuse, recycling, or ultimate disposal. A significant upgrade to a previous facility, the Temporary Hot Cell, will be implemented to perform this mission. The following major features will be added: a permanent shield wall; eight floor silos; new roof portals in the hot-cell roof; an upgraded ventilation system; and upgraded hot-cell jib crane; and video cameras to record operations and facilitate remote-handled operations. No safety-class systems, structures, and components will be present in the AHCF. There will be five safety-significant SSCs: hot cell structure, permanent shield wall, shield plugs, ventilation system, and HEPA filters. The type and quantity of radionuclides that could be located in the AHCF are defined primarily by SNL/NM's legacy materials, which include radioactive, transuranic, and mixed waste. The risk to the public or the environment presented by the AHCF is minor due to the inventory limitations of the Hazard Category 3 classification. Potential doses at the exclusion boundary are well below the evaluation guidelines of 25 rem. Potential for worker exposure is limited by the passive design features incorporated in the AHCF and by SNL's radiation protection program. There is no potential for exposure of the public to chemical hazards above the Emergency Response Protection Guidelines Level 2.

OSCAR,DEBBY S.; WALKER,SHARON ANN; HUNTER,REGINA LEE; WALKER,CHERYL A.

1999-12-01T23:59:59.000Z

356

Accelerating Combined Heat & Power Deployment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ACCELERATING COMBINED HEAT & POWER DEPLOYMENT An Industry Consultation by the United States Energy Association August 31, 2011 Cover Photograph: CHP Plant at the Mueller Energy...

357

NSTX Electrical Power Systems  

SciTech Connect

The National Spherical Torus Experiment (NSTX) has been designed and installed in the existing facilities at Princeton Plasma Physic Laboratory (PPPL). Most of the hardware, plant facilities, auxiliary sub-systems, and power systems originally used for the Tokamak Fusion Test Reactor (TFTR) have been used with suitable modifications to reflect NSTX needs. The design of the NSTX electrical power system was tailored to suit the available infrastructure and electrical equipment on site. Components were analyzed to verify their suitability for use in NSTX. The total number of circuits and the location of the NSTX device drove the major changes in the Power system hardware. The NSTX has eleven (11) circuits to be fed as compared to the basic three power loops for TFTR. This required changes in cabling to insure that each cable tray system has the positive and negative leg of cables in the same tray. Also additional power cabling had to be installed to the new location. The hardware had to b e modified to address the need for eleven power loops. Power converters had to be reconnected and controlled in anti-parallel mode for the Ohmic heating and two of the Poloidal Field circuits. The circuit for the Coaxial Helicity Injection (CHI) System had to be carefully developed to meet this special application. Additional Protection devices were designed and installed for the magnet coils and the CHI. The thrust was to making the changes in the most cost-effective manner without compromising technical requirements. This paper describes the changes and addition to the Electrical Power System components for the NSTX magnet systems.

A. Ilic; E. Baker; R. Hatcher; S. Ramakrishnan; et al

1999-12-16T23:59:59.000Z

358

Definition: British thermal unit | Open Energy Information  

Open Energy Info (EERE)

thermal unit thermal unit Jump to: navigation, search Dictionary.png British thermal unit The amount of heat required to raise the temperature of one pound of water one degree Fahrenheit; often used as a unit of measure for the energy content of fuels.[1][2] View on Wikipedia Wikipedia Definition The British thermal unit (BTU or Btu) is a traditional unit of energy equal to about 1055 joules. It is the amount of energy needed to cool or heat one pound of water by one degree Fahrenheit. In scientific contexts the BTU has largely been replaced by the SI unit of energy, the joule. The unit is most often used as a measure of power (as BTU/h) in the power, steam generation, heating, and air conditioning industries, and also as a measure of agricultural energy production (BTU/kg). It is still used

359

Evaluation of potential severe accidents during low power and shutdown operations at Grand Gulf, Unit 1. Volume 2, Part 1C: Analysis of core damage frequency from internal events for plant operational State 5 during a refueling outage, Main report (Sections 11--14)  

SciTech Connect

This document contains the accident sequence analysis of internally initiated events for Grand Gulf, Unit 1 as it operates in the Low Power and Shutdown Plant Operational State 5 during a refueling outage. The report documents the methodology used during the analysis, describes the results from the application of the methodology, and compares the results with the results from two full power analyses performed on Grand Gulf.

Whitehead, D. [Sandia National Labs., Albuquerque, NM (United States); Darby, J. [Science and Engineering Associates, Inc., Albuquerque, NM (United States); Yakle, J. [Science Applications International Corp., Albuquerque, NM (United States)] [and others

1994-06-01T23:59:59.000Z

360

Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1. Volume 5: Analysis of core damage frequency from seismic events during mid-loop operations  

SciTech Connect

In 1989 the US Nuclear Regulatory Commission (NRC) initiated an extensive program to examine carefully the potential risks during low-power and shutdown operations. The program included two parallel projects, one at Brookhaven National Laboratory studying a pressurized water reactor (Surry Unit 1) and the other at Sandia National Laboratories studying a boiling water reactor (Grand Gulf). Both the Brookhaven and Sandia projects have examined only accidents initiated by internal plant faults--so-called ``internal initiators.`` This project, which has explored the likelihood of seismic-initiated core damage accidents during refueling shutdown conditions, is complementary to the internal-initiator analyses at Brookhaven and Sandia. This report covers the seismic analysis at Surry Unit 1. All of the many systems modeling assumptions, component non-seismic failure rates, and human error rates that were used in the internal-initiator study at Surry have been adopted here, so that the results of the two studies can be as comparable as possible. Both the Brookhaven study and this study examine only two shutdown plant operating states (POSs) during refueling outages at Surry, called POS 6 and POS 10, which represent mid-loop operation before and after refueling, respectively. This analysis has been limited to work analogous to a level-1 seismic PRA, in which estimates have been developed for the core-damage frequency from seismic events during POSs 6 and 10. The results of the analysis are that the core-damage frequency of earthquake-initiated accidents during refueling outages in POS 6 and POS 10 is found to be low in absolute terms, less than 10{sup {minus}6}/year.

Budnitz, R.J. [Future Resources Associates, Inc., Berkeley, CA (United States); Davis, P.R. [PRD Consulting (United States); Ravindra, M.K.; Tong, W.H. [EQE International, Inc., Irvine, CA (United States)

1994-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Coronation Power | Open Energy Information  

Open Energy Info (EERE)

Coronation Power Jump to: navigation, search Name: Coronation Power Place: London, Greater London, United Kingdom Zip: EC1A 4JQ Sector: Wind energy Product: UK company formed to...

362

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-B 3-B Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in North Carolina and South Carolina to whom power may be scheduled pursuant to contracts between the Government and Carolina Power & Light Company (hereinafter called the Company) and the Customer. The Government is responsible for providing the scheduling. The Customer is responsible for providing a transmission arrangement. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to elect service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the John H. Kerr and Philpott Projects (hereinafter

363

United States  

Office of Legacy Management (LM)

WASHINGTON, TUESDAY, JUNE 28, 1983 @nngmeional Ruord United States of America .__ -- . . ,- PROCEEDINGS AND DEBATES OF THE 9@ CONGRESS, FIRST SESSION United States Government Printing Office SUPERINTENDENT OF DOCUMENTS Washmgton, D C 20402 OFFICIAL BUSINESS Penalty Ior pwate use. $xX Congresstonal Record (USPS 087-390) Postage and Fees Pad U S Government Prlnhng 0ffv.X 375 SECOND CLASS NEWSPAPER H.4578 ' C.QNGRESSIONAL RECORD - HOUSE June 28, 1983 H.J. Res. 273: Mr. BOUND. Mr. W~.XMAN. Mr. OBERSTAR, Mr. BEDELL. Mr. BONER of Tennessee, Mr. OWENS. Mr. DAUB, Mr. CONTE. Mr. RAHALL; Mr. GRAY, Mr. VANDER JACT. Mr. TRAKLER, and Mr. Vxrrro. H. Con. Res. 107: Mr. KASICH. Mr. AUCOIN. Mr. CARPER, and Mr. SIZHFIJER. H. Con. Res. 118: Mr. FISH. Mr. LANTOS.

364

United States  

Office of Legacy Management (LM)

ongrees;ional Record ongrees;ional Record United States of America __._ -.. I. :- PROCEEDINGS AND DEBATES OF THE 9tth CONGRESS, FIRST SESSION United States Government Printing Office SUPERINTENDENT OF DOCUMENTS Washmcqton. Cl C 20402 OFFICIAL BUSINESS Penalty Ior pwate use. $300 Congressmal Record (USPS 087-390) Postage and Fees Pad U S Governme3n:jPnntmg OfIce SECOND CLASS NEWSPAPER H.4578 ' June 28, 1983 -: I H.J. Res. 273: Mr. BOLAND, Mr. WA-. Mr. OBERSTAFC, M' r. BEDELL, Mr. BONER of Tennessee, Mr. OWENS. Mr. DAUB. Mr. CONTE. Mr. RAHALL,. Mr. GRAY, Mr. VANDER JAGT. Mr. TRAKLER. and Mr. VENTO. H. Con. Res. iO7: Mr. KASICH. Mr. ALCOIN. Mr. CARPER. and Mr. SCHEUER. H. Con. Res. 118: Mr. FISH, Mr. LANTOS. Mr. KILDEE. Mr. SOLARZ Mr. Bmrr, Mr. BELWLL, Mr. RANG~L, Mr. DYMALLY. Mr.

365

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-B 3-B Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Virginia and North Carolina to whom power may be scheduled pursuant to contracts between the Government, Virginia Electric and Power Company (hereinafter called the Company), the Company's Transmission Operator, currently PJM Interconnection LLC (hereinafter called PJM), and the Customer. The Government is responsible for providing the scheduling. The Customer is responsible for providing a transmission arrangement. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to elect service under another rate schedule. Applicability:

366

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wholesale Power Rate Schedule CBR-1-H Availability: This rate schedule shall be available to Big Rivers Electric Corporation and includes the City of Henderson, Kentucky (hereinafter called the Customer). Applicability: This rate schedule shall be applicable to electric capacity and energy available from the Dale Hollow, Center Hill, Wolf Creek, Cheatham, Old Hickory, Barkley, J. Percy Priest, and Cordell Hull Projects (all of such projects being hereinafter called collectively the "Cumberland Projects") and sold in wholesale quantities. Character of Service: The electric capacity and energy supplied hereunder will be three-phase alternating current at a nominal frequency of 60 hertz. The power shall be delivered at nominal voltages

367

All Sky Camera, LIDAR and Electric Field Meter: auxiliary instruments for the ASTRI SST-2M prototype  

E-Print Network (OSTI)

ASTRI SST-2M is the end-to-end prototype telescope of the Italian National Institute of Astro- physics, INAF, designed to investigate the 10-100 TeV band in the framework of the Cherenkov Telescope Array, CTA. The ASTRI SST-2M telescope has been installed in Italy in September 2014, at the INAF ob- serving station located at Serra La Nave on Mount Etna. The telescope is foreseen to be completed and fully operative in spring 2015 including auxiliary instrumentation needed to support both operations and data anal- ysis. In this contribution we present the current status of a sub-set of the auxiliary instruments that are being used at the Serra La Nave site, namely an All Sky Camera, an Electric Field Meter and a Raman Lidar devoted, together with further instrumentation, to the monitoring of the atmospheric and environmental conditions. The data analysis techniques under development for these instruments could be applied at the CTA sites, where similar auxiliary instrumentation will be installed.

Leto, Giuseppe; Bellassai, Giancarlo; Bruno, Pietro; Maccarone, Maria Concetta; Martinetti, Eugenio

2015-01-01T23:59:59.000Z

368

Thermodynamic and economic analysis of the different variants of a coal-fired, 460 MW power plant using oxy-combustion technology  

Science Journals Connector (OSTI)

Abstract In the face of existing international provisions limiting the emissions of greenhouse gases, primarily carbon dioxide, it is necessary to introduce solutions that will allow the production of electricity from coal with high efficiency and low emissions. Oxy-combustion systems integrated with carbon capture and storage (CCS) installations may prove to be such a solution. This paper presents the main results from a thermodynamic analysis of a supercritical unit operating in oxy-combustion technology, fueled with pulverized coal with a power output of 460 MW. The parameters of the live steam in the analyzed system are 600 °C/30 MPa. To perform the numerical analyses, models of the individual components were built, including an oxygen production installation (ASU), a boiler, a steam cycle and a flue gas conditioning system (CPU). The models were built in the commercial programs GateCycle and Aspen and then integrated into the Excel environment. In this paper, different structures for an integrated oxy-type system were analyzed and compared. The auxiliary power rates were determined for individual technological installations of the oxy-combustion power plant. The highest value of this indicator, in the range between 15.65% and 19.10% was calculated for the cryogenic ASU. The total value of this index for the whole installation reaches as high as 35% for the base case. The use of waste heat from the interstage cooling of compressors in the air separation installation and flue gas conditioning system was considered as the methods of counteracting the efficiency decrease resulting from the introduction of ASU and CPU. The proposed configurations and optimization allow a significant reduction of the auxiliary power of the considered unit. In consequence, the efficiency decrease was reduced by approximately 3.5% points. An economic analysis of the different structures of the oxy-fuel system and the reference air-fired power plant was also conducted using a newly developed computational algorithm built in the Excel environment. The algorithm uses a Break Even Point (BEP) method, focusing mainly on determining a break-even price of electricity. It was found that about the profitability of this investment will mainly decide the price of emission allowances. For the assumptions made, the oxy-combustion power plant will be economically comparable with a reference plant without carbon dioxide capture when the price of allowances would be between 34 and 41 €/tonne. A sensitivity analysis concerning the influence of selected components of the cash flows on the break-even price of electricity was also performed. The main results of the calculations are presented in the paper.

Anna Skorek-Osikowska; Lukasz Bartela; Janusz Kotowicz; Marcin Job

2013-01-01T23:59:59.000Z

369

Single-bridge unit-connected HVDC generation with increased pulse number  

SciTech Connect

A true unit-connected generator-HVdc convertor scheme is proposed which removes the need to use two bridges in series to achieve twelve-pulse operation. Moreover, the combination of a single main bridge and an auxiliary feedback dc ripple reinjection bridge is shown to increase the pulse number from 6 to 18. This is achieved purely by natural commutation and is equally valid for rectification and inversion. The theoretical waveforms are validated by extensive experimental verification.

Villablanca, M.; Arrillaga, J. (Univ. of Canterbury, Christchurch (New Zealand))

1993-04-01T23:59:59.000Z

370

Nuclear Power Development in the United States  

Science Journals Connector (OSTI)

...seem the most prom-ising for meeting our objective of pro-ducing...at Commission sites, one at Hanford (Washington) and the other...trivial matters in reports and public statements of the Bureau of...nearest road ends, most of the 2000-odd annual visitors to Rainbow...

Frank K. Pittman

1961-05-19T23:59:59.000Z

371

E-Print Network 3.0 - assisted auxiliary switch Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

quasiresonant tank soft- switching inverter," in Proc. IEEE Ind... IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 19, NO. 2, MARCH 2004 363 A Passive Soft-Switching... for...

372

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1-E 1-E Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter call the Customer) in South Carolina to whom power may be wheeled and scheduled pursuant to contracts between the Government and South Carolina Public Service Authority (hereinafter called the Authority). Nothing in this rate schedule shall preclude an eligible customer from electing service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters and Richard B. Russell Projects and sold under appropriate contracts between the Government and

373

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-E 2-E Availability: This rate schedule shall be available public bodies and cooperatives (any one of which is hereinafter called the Customer) in South Carolina to whom power may be wheeled pursuant to contracts between the Government and the South Carolina Electric & Gas Company (hereinafter called the Company). The customer is responsible for providing a scheduling arrangement with the Government. Nothing in this rate schedule shall preclude an eligible customer from electing service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters and Richard B.

374

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-E 3-E Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in North Carolina and South Carolina to whom power may be scheduled pursuant to contracts between the Government and Duke Energy Company (hereinafter called the Company) and the Customer. The Customer is responsible for providing a transmission arrangement. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to elect service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters and Richard B.

375

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-E 2-E Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in North Carolina and South Carolina to whom power may be transmitted pursuant to contracts between the Government and Duke Energy Company (hereinafter called the Company) and the Customer. The Customer is responsible for providing a scheduling arrangement with the Government. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to elect service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter

376

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-E 3-E Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Georgia, Alabama, Mississippi, and Florida to whom power may be scheduled pursuant to contracts between the Government and Southern Company Services, Incorporated (hereinafter called the Company) and the Customer. The Customer is responsible for providing a transmission arrangement. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to elect service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter

377

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wholesale Power Rate Schedule JW-1-J Availability: This rate schedule shall be available to public bodies and cooperatives served by the Progress Energy Florida and having points of delivery within 150 miles of the Jim Woodruff Project (hereinafter called the Project). Applicability: This rate schedule shall be applicable to firm power and accompanying energy made available by the Government from the Project and sold in wholesale quantities. Character of Service: The electric capacity and energy supplied hereunder will be three-phase alternating current at a nominal frequency of 60 cycles per second delivered at the delivery points of the customer. Monthly Rate: The monthly rate for capacity and energy made available or delivered under this

378

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ALA-1-N ALA-1-N Availability: This rate schedule shall be available to the PowerSouth Energy Cooperative (hereinafter called the Cooperative). Applicability: This rate schedule shall be applicable to power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters, and Richard B. Russell Projects and sold under contract between the Cooperative and the Government. This rate schedule does not apply to energy from pumping operations at the Carters and Richard B. Russell Projects. Character of Service: The electric capacity and energy supplied hereunder will be three-phase alternating current at a nominal frequency of 60 Hertz and shall be delivered at the

379

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Duke-1-E Duke-1-E Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in North Carolina and South Carolina to whom power may be transmitted and scheduled pursuant to contracts between the Government and Duke Energy Company (hereinafter called the Company) and the Customer. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to elect service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters and Richard B.

380

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-E 3-E Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter call the Customer) in South Carolina to whom power may be scheduled pursuant to contracts between the Government and South Carolina Public Service Authority (hereinafter called the Authority). The customer is responsible for providing a transmission arrangement. Nothing in this rate schedule shall preclude an eligible customer from electing service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters and Richard B.

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-E 2-E Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Georgia, Alabama, Mississippi, and Florida to whom power may be transmitted pursuant to contracts between the Government and Southern Company Services, Incorporated (hereinafter called the Company) and the Customer. The Customer is responsible for providing a scheduling arrangement with the Government. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to elect service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter

382

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SOCO-1-E SOCO-1-E Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Georgia, Alabama, Mississippi, and Florida to whom power may be transmitted and scheduled pursuant to contracts between the Government and Southern Company Services, Incorporated (hereinafter called the Company) and the Customer. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to elect service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters and Richard B.

383

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SCE&G-1-E SCE&G-1-E Availability: This rate schedule shall be available public bodies and cooperatives (any one of which is hereinafter called the Customer) in South Carolina to whom power may be wheeled and scheduled pursuant to contracts between the Government and the South Carolina Electric & Gas Company (hereinafter called the Company). Nothing in this rate schedule shall preclude an eligible customer from electing service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters and Richard B. Russell Projects and sold under appropriate contracts between the Government and

384

United States  

Gasoline and Diesel Fuel Update (EIA)

United States United States Coal ................................................ 4,367 4,077 4,747 4,181 4,473 4,125 4,983 4,330 4,414 4,003 4,796 4,178 4,344 4,479 4,348 Natural Gas .................................... 2,802 2,843 3,694 2,863 2,713 2,880 3,636 2,707 2,792 2,972 3,815 2,849 3,052 2,986 3,109 Petroleum (a) .................................. 74 73 81 67 73 70 75 66 75 70 76 66 74 71 71 Other Gases ................................... 32 33 36 32 32 34 37 33 33 35 39 34 33 34 35 Nuclear ........................................... 2,176 2,044 2,257 2,170 2,106 2,037 2,167 2,010 2,144 2,074 2,206 2,055 2,162 2,080 2,120 Renewable Energy Sources: Conventional Hydropower ........... 736 886 716 633 765 887 708 646 767 919 729 659 742 751 768 Wind ............................................ 491 520 353 449 477 521 379 475

385

Energy & Society Energy Units and Fundamentals Energy Units and Fundamentals of  

E-Print Network (OSTI)

Energy & Society Energy Units and Fundamentals 1 Toolkit 1: Energy Units and Fundamentals of Quantitative Analysis #12;Energy & Society Energy Units and Fundamentals 2 Table of Contents 1. Key Concepts: Force, Work, Energy & Power 3 2. Orders of Magnitude & Scientific Notation 6 2.1. Orders

Kammen, Daniel M.

386

Pennsylvania Nuclear Profile - Power Plants  

U.S. Energy Information Administration (EIA) Indexed Site

Pennsylvania nuclear power plants, summer capacity and net generation, 2010" Pennsylvania nuclear power plants, summer capacity and net generation, 2010" "Plant name/total reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear net generation (percent)","Owner" "Beaver Valley Unit 1, Unit 2","1,777","14,994",19.3,"FirstEnergy Nuclear Operating Company" "Limerick Unit 1, Unit 2","2,264","18,926",24.3,"Exelon Nuclear" "PPL Susquehanna Unit 1, Unit 2","2,450","18,516",23.8,"PPL Susquehanna LLC" "Peach Bottom Unit 2, Unit 3","2,244","18,759",24.1,"Exelon Nuclear" "Three Mile Island Unit 1",805,"6,634",8.5,"Exelon Nuclear"

387

United States Government  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

nUnited States Government Department of Energy Bonneville Power Administration memorandum REPLY TO AnN OF: KEP-4 SUBJECT: Environmental Clearance Memorandum TO: Robert Macy Project Manager - TELF-TPP-3 Proposed Action: Access road improvement and bridge replacement for the Raver-Paul No. transmission line structure 18/1. Budget Information: Work Order # 00220048 PP&A Project No.: 954 Proposed by: Bonneville Power Administration (BPA) Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3, Routine maintenance activities .. .for structures, rights-of-way, infrastructures such as roads, equipment. .. routine maintenance activities, corrective ....are required to

388

Alternative Fuels Data Center  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

interest rate loans to small businesses undertaking projects in Pennsylvania that reduce waste, pollution, or energy use, including the purchase of truck auxiliary power units....

389

Alternative Fuels Data Center  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction and Natural Gas Vehicle (NGV) Weight Exemption Any motor vehicle equipped with an auxiliary power unit or other idle reduction technology may exceed the gross,...

390

Alternative Fuels Data Center  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

period. Exceptions apply, including those pertaining to emergency vehicles, auxiliary power unit use, and outside temperature. Additionally, exemptions apply to diesel vehicles...

391

Using lean enterprise principles to drive quality and on time delivery to customers : a study of the Honeywell Aerospace Engine Assembly and Test Center of Excellence .  

E-Print Network (OSTI)

??Honeywell Aerospace has been a leader in manufacturing high quality engines to customers for decades. With engine and auxiliary power unit (APU) growth of-9% in… (more)

Jones, Andrea (Andrea Sieg)

2006-01-01T23:59:59.000Z

392

Alternative Fuels Data Center  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

vehicle equipped with an auxiliary power unit or other qualified idle reduction technology may exceed the state gross, axle, tandem, or bridge formula weight limits by up to...

393

UNITED STATES  

Office of Legacy Management (LM)

f).~<~~ \--\c :y-,ai F p"- KG f).~<~~ \--\c :y-,ai F p"- KG WASHINOTDN 28.0. C. ' -lr ' \ ' ' --- ".I ?--" ' z I. .~;-4.' J frr*o& 2 ii, - - -4 70-147 LRL:JCD JAN !! 8 1958 Oregon Metallurgical Corporation P. 0. Box 484 Albany, Oregon Attention: Mr. Stephen M. Shelton General Manager Gentlemen: Enclosed is Special Nuclear Material License No. SNM-144, as amended. Very 33uly yours, r:; I,;, ll)~gQ""d".- Lyall Johnson Chief, Licensing Branch Division of Licensing & Regulation Enclosure: SNM-144, as amended Distribution: bRO0 Attn: Dr. H.M.Roth DFMusser NMM MMMann INS JCRyan FIN (2) HSteele LRL SRGustavson LRL Document room Formal file Suppl. file Br & Div rf's ' .b liwwArry s/VW- ' q+ ' yj/ 2; 2-' , COP' 1 J JAM01958 -- UNITED STATES ATOMIC ENERGY COMMISSION

394

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bangor Hydro-Electric Company Bangor Hydro-Electric Company OE Docket No. PP-89-1 Amendment to Presidential Permit Order No. PP-89-1 December 30,2005 PRESIDENTIAL PERMIT AMENDMENT Bangor Hydro-Electric Company Order No. PP-89-1 I. BACKGROUND The Department of Energy (DOE) has responsibility for implementing Executive Order (E.O.) 10485, as amended by E.O. 12038, which requires the issuance of a Presidential permit by DOE before electric trans~nission facilities may be constructed, operated, maintained, or connected at the borders of the United States. DOE may issue such a permit if it determines that the permit is in the public interest and after obtaining favorable recommendations from the U.S. Departments of State and Defense. On December 16, 1988, Bangor Hydro-Electric Company (BHE) applied to DOE

395

Power Plant Power Plant  

E-Print Network (OSTI)

Basin Center for Geothermal Energy at University of Nevada, Reno (UNR) 2 Nevada Geodetic LaboratoryStillwater Power Plant Wabuska Power Plant Casa Diablo Power Plant Glass Mountain Geothermal Area Lassen Geothermal Area Coso Hot Springs Power Plants Lake City Geothermal Area Thermo Geothermal Area

Tingley, Joseph V.

396

Power Factor Reactive Power  

E-Print Network (OSTI)

power: 130 watts Induction motor PSERC Incandescent lights 0 0.002 0.004 0.006 0.008 0.01 0.012 0.014 0 power: 150 watts #12;Page 4 PSERC Incandescent Lights PSERC Induction motor with no load #12;Page 5 Incandescent Lights #12;Page 7 PSERC Incandescent lights power: Power = 118 V x 1.3 A = 153 W = 0.15 kW = power

397

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Duke-4-E Duke-4-E Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in North Carolina and South Carolina served through the transmission facilities of Duke Energy Company (hereinafter called the Company) and the Customer. The Customer is responsible for providing a scheduling arrangement with the Government and for providing a transmission arrangement with the Company. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to elect service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter

398

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Replacement-1 Replacement-1 Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Georgia, Alabama, Mississippi, Florida, South Carolina, or North Carolina to whom power is provided pursuant to contracts between the Government and the Customer. Applicability: This rate schedule shall be applicable to the sale at wholesale energy purchased to meet contract minimum energy and sold under appropriate contracts between the Government and the Customer. Character of Service: The energy supplied hereunder will be delivered at the delivery points provided for under appropriate contracts between the Government and the Customer. Monthly Rate: The rate for energy sold under this rate schedule for the months specified shall

399

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4-E 4-E Availability: This rate schedule shall be available public bodies and cooperatives (any one of which is hereinafter called the Customer) in South Carolina served through the transmission facilities of South Carolina Electric & Gas Company (hereinafter called the Company). The customer is responsible for providing a scheduling arrangement with the Government and for providing a transmission arrangement. Nothing in this rate schedule shall preclude an eligible customer from electing service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters and Richard B.

400

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1-A 1-A Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Georgia, Alabama, Mississippi, Florida, South Carolina, or North Carolina to whom power is provided pursuant to contracts between the Government and the Customer. Applicability: This rate schedule shall be applicable to the sale at wholesale energy generated from pumping operations at the Carters and Richard B. Russell Projects and sold under appropriate contracts between the Government and the Customer. The energy will be segregated from energy from other pumping operations. Character of Service: The energy supplied hereunder will be delivered at the delivery points provided for under appropriate contracts between the Government and the Customer.

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SOCO-4-E SOCO-4-E Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Georgia, Alabama, Mississippi, and Florida served through the transmission facilities of Southern Company Services, Inc. (hereinafter called the Company) or the Georgia Integrated Transmission System. The Customer is responsible for providing a scheduling arrangement with the Government and for providing a transmission arrangement. Nothing in this rate schedule shall preclude modifications to the aforementioned contracts to allow an eligible customer to elect service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter

402

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pump-2 Pump-2 Availability: This rate schedule shall be available to public bodies and cooperatives who provide their own scheduling arrangement and elect to allow Southeastern to use a portion of their allocation for pumping (any one of whom is hereinafter called the Customer) in Georgia, Alabama, Mississippi, Florida, South Carolina, or North Carolina to whom power is provided pursuant to contracts between the Government and the Customer. Applicability: This rate schedule shall be applicable to the sale at wholesale energy generated from pumping operations at the Carters and Richard B. Russell Projects and sold under appropriate contracts between the Government and the Customer. This energy will be segregated from energy from other pumping operations.

403

United States  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4-E 4-E Availability: This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter call the Customer) in South Carolina served through the transmission facilities of South Carolina Public Service Authority (hereinafter called the Authority). The customer is responsible for providing a scheduling arrangement with the Government and for providing a transmission arrangement. Nothing in this rate schedule shall preclude an eligible customer from electing service under another rate schedule. Applicability: This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters and Richard B.

404

Termination unit  

DOE Patents (OSTI)

This invention relates to a termination unit comprising an end-section of a cable. The end section of the cable defines a central longitudinal axis and comprising end-parts of N electrical phases, an end-part of a neutral conductor and a surrounding thermally insulation envelope adapted to comprising a cooling fluid. The end-parts of the N electrical phases and the end-part of the neutral conductor each comprising at least one electrical conductor and being arranged in the cable concentrically around a core former with a phase 1 located relatively innermost, and phase N relatively outermost in the cable, phase N being surrounded by the neutral conductor, electrical insulation being arrange between neighboring electrical phases and between phase N and the neutral conductor, and wherein the end-parts of the neutral conductor and the electrical phases each comprise a contacting surface electrically connected to at least one branch current lead to provide an electrical connection: The contacting surfaces each having a longitudinal extension, and being located sequentially along the longitudinal extension of the end-section of the cable. The branch current leads being individually insulated from said thermally insulation envelope by individual electrical insulators.

Traeholt, Chresten [Frederiksberg, DK; Willen, Dag [Klagshamn, SE; Roden, Mark [Newnan, GA; Tolbert, Jerry C [Carrollton, GA; Lindsay, David [Carrollton, GA; Fisher, Paul W [Heiskell, TN; Nielsen, Carsten Thidemann [Jaegerspris, DK

2014-01-07T23:59:59.000Z

405

Definition: Power density | Open Energy Information  

Open Energy Info (EERE)

density density Jump to: navigation, search Dictionary.png Power density The rate of energy flow (power) per unit volume, area or mass. Common metrics include: horsepower per cubic inch, watts per square meter and watts per kilogram.[1][2] View on Wikipedia Wikipedia Definition Power density (or volume power density or volume specific power) is the amount of power (time rate of energy transfer) per unit volume. In energy transformers like batteries, fuel cells, motors, etc. but also power supply units or similar, power density refers to a volume. It is then also called volume power density which is expressed as W/m. Volume power density is sometimes an important consideration where space is constrained. In reciprocated internal combustion engines, power density- power per swept

406

Making Africa's Power Sector Sustainable: An Analysis of Power Sector  

Open Energy Info (EERE)

Making Africa's Power Sector Sustainable: An Analysis of Power Sector Making Africa's Power Sector Sustainable: An Analysis of Power Sector Reforms in Africa Jump to: navigation, search Tool Summary Name: Making Africa's Power Sector Sustainable: An Analysis of Power Sector Reforms in Africa Agency/Company /Organization: United Nations Environment Programme, United Nations Economic Commission for Africa Sector: Energy Topics: Market analysis, Policies/deployment programs, Co-benefits assessment, - Energy Access, - Environmental and Biodiversity Resource Type: Guide/manual, Lessons learned/best practices Website: www.uneca.org/eca_programmes/nrid/pubs/powersectorreport.pdf UN Region: Eastern Africa References: Making Africa's Power Sector Sustainable: An Analysis of Power Sector Reforms in Africa[1] Overview "This study assesses the socio-economic and environmental impacts of power

407

DYNAMIC MODELLING OF AUTONOMOUS POWER SYSTEMS INCLUDING RENEWABLE POWER SOURCES.  

E-Print Network (OSTI)

(thermal, gas, diesel) and renewable (hydro, wind) power units. The objective is to assess the impact - that have a special dynamic behaviour, and the wind turbines. Detailed models for each one of the power system components are developed. Emphasis is given in the representation of different hydro power plant

Paris-Sud XI, Université de

408

Feasibility Assessment of the Water Energy Resources of the United...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Resources of the United States for New Low Power and Small Hydro Classes of Hydroelectric Plants: Main Report and Appendix A Feasibility Assessment of the Water Energy...

409

The use of auxiliary ignition devices to improve combustion of low centane-high volatility fuels in a diesel engine  

SciTech Connect

The use of auxiliary ignition devices to improve the combustion of low cetane-high volatility fuels in a Diesel engine is described. Previous combustion with a low cetane-high volatility fuel (with a spark plug located at the periphery of the cylinder) resulted in engine knock at heavy loads and poor engine operation at light loads. In the present investigation, several new ignition devices were used to ignite the fuel in the center of the cylinder, to allow combustion to be controlled by rate of injection. The devices used were an extended spark electrode, a fuel spray deflector, a nozzle glow ring, and a nozzle fuel cage. High speed photography and heat release were used to characterize the ignition and combustion process of the low cetane fuel in conjunction with the ignition devices. Combustion with all of the ignition devices was initiated in the center of the cylinder, significantly reducing engine knock. The use of the auxiliary ignition devices to ignite the fuel in the center of the chamber demonstrated extended operation of the Diesel engine for all of the devices tested.

Stroia, B.L.; Abata. D.L.

1988-01-01T23:59:59.000Z

410

Development of learning material to wind power courses.  

E-Print Network (OSTI)

??Wind power plants are more and more commonly used as power production units, which lead to an increased demand of educated personnel within the area.… (more)

Bruhn, Kristin; Lorensson, Sofia

2009-01-01T23:59:59.000Z

411

National CHP Roadmap: Doubling Combined Heat and Power Capacity...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

National CHP Roadmap: Doubling Combined Heat and Power Capacity in the United States by 2010, March 2001 National CHP Roadmap: Doubling Combined Heat and Power Capacity in the...

412

REQUEST BY WESTINGHOUSE POWER GENERATION, A FORMER DIVISION OF...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

position in the power generation field. It is the second largest commercial supplier of power generation gas turbines in the United States and the fourth single largest supplier...

413

Tunable, self-powered integrated arc plasma-melter vitrification system for waste treatment and resource recovery  

DOE Patents (OSTI)

The present invention provides a relatively compact self-powered, tunable waste conversion system and apparatus which has the advantage of highly robust operation which provides complete or substantially complete conversion of a wide range of waste streams into useful gas and a stable, nonleachable solid product at a single location with greatly reduced air pollution to meet air quality standards. The system provides the capability for highly efficient conversion of waste into high quality combustible gas and for high efficiency conversion of the gas into electricity by utilizing a high efficiency gas turbine or by an internal combustion engine. The solid product can be suitable for various commercial applications. Alternatively, the solid product stream, which is a safe, stable material, may be disposed of without special considerations as hazardous material. In the preferred embodiment of the invention, the arc plasma furnace and joule heated melter are formed as a fully integrated unit with a common melt pool having circuit arrangements for the simultaneous independently controllable operation of both the arc plasma and the joule heated portions of the unit without interference with one another. The preferred configuration of this embodiment of the invention utilizes two arc plasma electrodes with an elongated chamber for the molten pool such that the molten pool is capable of providing conducting paths between electrodes. The apparatus may additionally be employed with reduced or without further use of the gases generated by the conversion process. The apparatus may be employed as a self-powered or net electricity producing unit where use of an auxiliary fuel provides the required level of electricity production.

Titus, Charles H. (Newtown Square, PA); Cohn, Daniel R. (Chestnuthill, MA); Surma, Jeffrey E. (Kennewick, WA)

1998-01-01T23:59:59.000Z

414

Introduction to MEAG Power  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Introduction to MEAG Power Introduction to MEAG Power Southeastern Federal Power Alliance Meeting October 9, 2013 Municipal Electric Authority of Georgia ■ Joint Action Agency ─ Formed in 1975 ─ Owns and operates electric generation and transmission facilities ─ Provides bulk electric power to 48 cities and 1 county in the State of Georgia ■ All 49 Participants have reaffirmed 50-year power sales extensions ■ Take-or-pay contracts with participants are court validated contracts with a General Obligation pledge from each city ■ Generation ownership interest in 10 generating units and a transmission system ─ 2,069 MW generating capacity online ─ 500 MW Plant Vogtle Units 3 & 4 under development ■ Schedules the output from the SEPA contracts for the 49 members

415

Ex post analysis of economic impacts from wind power development in U.S. counties  

E-Print Network (OSTI)

Figure 1. Location of Wind Power Development in the UnitedFigure 4: Total Installed Wind Power Capacity (MW): 2000 -development impacts of wind power installations. References

Brown, Jason P

2014-01-01T23:59:59.000Z

416

Efficiency of Energy Use in the United States  

Science Journals Connector (OSTI)

...at the power plant. Conversely...by nuclear plants for this purpose...required at the power plant for each unit...Comparison of insulation requirements...Insulation specification Gas Electric...ample use of thermal insulation...

Eric Hirst; John C. Moyers

1973-03-30T23:59:59.000Z

417

Implementation and Evaluation of an Ultracapacitor-Based Auxiliary Energy System for Electric Vehicles  

E-Print Network (OSTI)

of an ultracapacitor bank and a buck- boost converter, was installed in an electric vehicle, which is powered by a lead Vehicles Micah OrtĂşzar, Jorge Moreno and Juan Dixon (SM IEEE) Department of Electrical Engineering system for electric vehicles was designed, implemented and tested. The system, composed

Catholic University of Chile (Universidad CatĂłlica de Chile)

418

Engineering and Analysis of a Saccharomyces cerevisiae Strain That Uses Formaldehyde as an Auxiliary Substrate  

Science Journals Connector (OSTI)

...The Netherlands Ministry of Economic Affairs and the B-Basic partner...Co-gasification of biomass and coal for methanol synthesis. Appl...hydrogen from biomass. J. Power Sources 111: 1-22. 18 Hartley...Pronk. 2002. Functional analysis of structural genes for NAD-dependent...

Richard J. S. Baerends; Erik de Hulster; Jan-Maarten A. Geertman; Jean-Marc Daran; Antonius J. A. van Maris; Marten Veenhuis; Ida J. van der Klei; Jack T. Pronk

2008-03-31T23:59:59.000Z

419

EIA Electric Power Forms  

Gasoline and Diesel Fuel Update (EIA)

Electric Power Forms Electric Power Forms EIA Electric Power Forms Listing of Publicly Available and Confidential Data EIA's statistical surveys encompass each significant electric supply and demand activity in the United States. Most of the electric power survey forms resulting data elements are published, but respondent confidentiality is required. The chart below shows the data elements for each survey form and how each data element is treated in regard to confidentiality. Data Categories Data collection forms EIA- 411 EIA- 826 EIA- 860 EIA- 860M EIA- 861 EIA- 923 Frame Information Utility identification and iocation -- -- -- -- X -- Plant identification and iocation -- -- -- X -- X Generation and fuel Latitude and longitude -- -- X -- -- --

420

Atomic Energy Commission : Atomic Power at Shippingport - 1958 Educational Film  

SciTech Connect

The United States Atomic Energy Commission & Westinghouse Electric Company take us on a tour of an atomic power station.

None

2013-02-02T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

United States Government  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LICE F 137: r.e Electr LICE F 137: r.e Electr onic Form App roved by CllR - 1010fJI2002 i/JI~~I United States Government Department of Energy Bonneville Power Admi istration memorandum DATE : REPLY TO AnN OF : KEPR-4 SUBJECT: Environmental Clearance Memorandum TO: Stephen Duncan Project Manager - TERS-3 Proposed Action: Removal of de-stabilized and downed trees resulting from a December 200 8 wind storm on the de-energized Lyons Ultra High Voltage Test Line NO.1. PP&A Project No.: PP&A 1309 Budget Information: Work Order # 184006 Categorical Exclusion Applied (from Subpart 0, 10 C.F.R. Part 1021): B 1.3 Routine maintenance/custodial services for buildings, structures, infrastructures, equipment. Location: Fee-owned ROW on the de-energized Lyons UHV Te st Line No .1 to the south of

422

United States Government  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

:)£ F 13 :)£ F 13 ;' 5 H e Etectroou: Form Approved by CGJR - 01120195 (n·/w! United States Government Department of Energy Bonneville Power Administration memorandum DATE: 0 I. 7 20D 9 REPLY TO AnN OF: KEP-4 SUBJECT: Environmental Clearance Memorandum TO : Robert Macy Project Manager - TELF-TPP-3 Proposed Action: Perform routine access road maintenance to the Rockdale Microwave site . Budget Information: Work Order #180709 PP&A Project No.: 1389 Categorical Exclusions Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3, Routine maintenance activities .. .for structures, rights-of-way, infrastructures such as roads, equipment. .. routine maintenance activities, corrective .... are required to maintain ... infrastructures . ..in a condition suitable for a facility to be used for its designed purpose.

423

Green Power Network: Past National Green Power Marketing Conference  

NLE Websites -- All DOE Office Websites (Extended Search)

Fifth National Green Power Marketing Conference: Fifth National Green Power Marketing Conference: Powering the New Millennium Held August 7-8, 2000 in Denver, Colorado Fifth National Green Power Marketing Conference Summary (PDF 95.1 MB) Download Adobe Reader As the preeminent conference addressing green power marketing in the United States, the fifth annual conference provided an update of domestic green power marketing activities and address such topics as evolving perceptions of green power, why businesses and government agencies are buying green power, how to build demand for green power, what is working well in utility green pricing programs, and international green power markets. The conference was co-sponsored by the U.S. Department of Energy, U.S. Environmental Protection Agency, Electric Power Research Institute, and Edison Electric Institute

424

Massachusetts Nuclear Profile - Pilgrim Nuclear Power Station  

U.S. Energy Information Administration (EIA) Indexed Site

Pilgrim Nuclear Power Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer cpacity factor (percent)","Type","Commercial operation date","License...

425

Okeanskaya Geothermal Power Plant | Open Energy Information  

Open Energy Info (EERE)

Plant Information Facility Type Single Flash Owner Ministry of Natural Resources of Russia Commercial Online Date 2007 Power Plant Data Type of Plant Number of Generating Units...

426

Mendeleevskaya Geothermal Power Plant | Open Energy Information  

Open Energy Info (EERE)

Plant Information Facility Type Single Flash Owner Ministry of Natural Resources of Russia Commercial Online Date 2007 Power Plant Data Type of Plant Number of Generating Units...

427

Kinetic Wave Power | Open Energy Information  

Open Energy Info (EERE)

Wave Power Address: 2861 N Tupelo St Place: Midland Zip: 48642 Region: United States Sector: Marine and Hydrokinetic Phone Number: 989-839-9757 Website: http:...

428

Black Hills Power- Residential Customer Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

Black Hills Power offers cash rebates to residential customers who purchase and install energy efficient equipment in their homes. Incentives exist for water heaters, demand control units, air...

429

PowerSaver Approved Lenders List  

Energy.gov (U.S. Department of Energy (DOE))

This document describes the 2014 approved PowerSaver lender list with contact information for the various states across the United States.

430

SeaMicro Volume Server Power Reduction  

Energy.gov (U.S. Department of Energy (DOE))

Fact sheet about saving 75% of computing energy through an inter-connected array of low-power central processing units

431

Optimal Power Sharing for Microgrid with Multiple Distributed Generators  

Science Journals Connector (OSTI)

Abstract This paper describes the active power sharing of multiple distributed generators (DGs) in a microgrid. The operating modes of a microgrid are 1) a grid-connected mode and 2) an autonomous mode. During islanded operation, one DG unit should share its output power with other DG units in exact accordance with the load. Unit output power control (UPC) is introduced to control the active power of DGs. The viability of the proposed power control mode is simulated by MATLAB/SIMULINK.

V. Logeshwari; N. Chitra; A. Senthil Kumar; Josiah Munda

2013-01-01T23:59:59.000Z

432

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

2 Fuels Used and End Uses in U.S. Homes, by OwnerRenter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings...

433

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

2 Household Demographics of U.S. Homes, by OwnerRenter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings...

434

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Asked (Apartments in Buildings" "With 5 or More Units)",19.1,5.8,6.2,2.8,2.8,1.5 "FoundationBasement of Single-Family" "Units and Apartments in Buildings With" "2 to 4 Units...

435

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

"Not Asked (Apartments in Buildings" "With 5 or More Units)",19.1,4.4,3.7,6.2,4.7 "FoundationBasement of Single-Family" "Units and Apartments in Buildings With" "2 to 4 Units...

436

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

"Not Asked (Apartments in Buildings" "With 5 or More Units)",19.1,9.6,5,2.2,1.5,0.8 "FoundationBasement of Single-Family" "Units and Apartments in Buildings With" "2 to 4 Units...

437

Celt Power Ltd | Open Energy Information  

Open Energy Info (EERE)

search Name: Celt Power Ltd Place: Newton, United Kingdom Zip: SY16 1RB Sector: Wind energy Product: JV between Euros Energy Europe and ScottishPower to develop UK wind...

438

Slough Heat and Power | Open Energy Information  

Open Energy Info (EERE)

Slough Heat and Power Jump to: navigation, search Name: Slough Heat and Power Place: SL1 4TU, England, United Kingdom Zip: SL1 4TU Sector: Renewable Energy Product: String...

439

Reducing Power Consumption of Wireless Pulse Oximeters  

Science Journals Connector (OSTI)

Purpose...– To implement the signal processing algorithms into a data evaluation unit powered by mains electricity whilst the measuring head is powered by ... it is still not used in today’s wireless

N. Stuban; M. Niwayama

2012-01-01T23:59:59.000Z

440

Prenergy Power Ltd | Open Energy Information  

Open Energy Info (EERE)

Prenergy Power Ltd Jump to: navigation, search Name: Prenergy Power Ltd Place: London, England, United Kingdom Zip: W1J 5HS Sector: Biomass Product: Prenergy is owned by a group of...

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Safety Evaluation Report related to the operation of Watts Bar Nuclear Plant, Units 1 and 2 (Docket Numbers 50-390 and 50-391). Supplement Number 13  

SciTech Connect

This report supplements the Safety Evaluation Report (SER), NUREG-0847 (June 1982), Supplement No. 1 (September 1982), Supplement No. 2 (January 1984), Supplement No. 3 (January 1985), Supplement No. 4 (March 1985), Supplement No. 5 (November 1990), Supplement No. 6 (April 1991), Supplement No. 7 (September 1991), Supplement No. 8 (January 1992), Supplement No. 9 (June 1992), Supplement No. 10 (October 1992), Supplement No. 11 (April 1993), and Supplement No. 12 (October 1993), issued by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission with respect to the application filed by the Tennessee Valley Authority, as applicant and owner, for licenses to operate the Watts Bar Nuclear Plant, Units 1 and 2 (Docket Nos. 50-390 and 50-391). The facility is located in Rhea County, Tennessee, near the Watts Bar Dam on the Tennessee River. This supplement provides recent information regarding resolution of some of the outstanding and confirmatory items, and proposed license conditions identified in the SER. These issues relate to: Design criteria -- structures, components, equipment, and systems; Reactor; Instrumentation and controls; Electrical power systems; Auxiliary systems; Conduct of operations; Accident analysis; and Quality assurance.

Not Available

1994-04-01T23:59:59.000Z

442

A Seeded Memetic Algorithm for Large Unit Commitment Problems  

Science Journals Connector (OSTI)

The paper shows that the use of a memetic algorithm (MA), a genetic algorithm (GA) combined with local search, synergistically combined with Lagrangian relaxation is effective and efficient for solving large unit commitment problems in electric power ... Keywords: Lagrangian relaxation, electrical power generation, genetic algorithm, memetic algorithm, unit commitment

Jorge Valenzuela; Alice E. Smith

2002-03-01T23:59:59.000Z

443

RESULTSRESULTS Assisted in selection of APU mounting configuration on truck  

E-Print Network (OSTI)

subcomponents, using actual frame-rail data as vibration input from truck · Enabled measurement location Motion Fuel Cell Auxiliary Power Unit (APU): Dynamic ModelingFuel Cell Auxiliary Power Unit (APU@coe.eng.ua.edu OBJECTIVESOBJECTIVES ·Develop a computer model to predict the vibratory response of the fuel cell APU components ·Use

Carver, Jeffrey C.

444

Cost Effective, High Efficiency Integrated Systems Approach To Auxiliary Electric Motors  

SciTech Connect

The CARAT program, carried out by Kinetic Art & Technology Corporation (KAT), has been one of the most commercially successful KAT R&D programs to date. Based on previous development of its technology, KAT designed, constructed and tested a highly efficient motor and controller system under this CARAT program with supplemental commercial funding. Throughout this CARAT effort, the technical objectives have been refined and refocused. Some objectives have been greatly expanded, while others have been minimized. The determining factor in all decisions to refocus the objectives was the commercial need, primarily the needs of KAT manufacturing partners. Several companies are employing the resulting CARAT motor and controller designs in prototypes for commercial products. Two of these companies have committed to providing cost share in order to facilitate the development. One of these companies is a major manufacturing company developing a revolutionary new family of products requiring the ultra-high system efficiency achievable by the KAT motor and controller technologies (known as Segmented ElectroMagnetic Array, or SEMA technology). Another company requires the high efficiency, quiet operation, and control characteristics afforded by the same basic motor and controller for an advanced air filtration product. The combined annual production requirement projected by these two companies exceeds one million units by 2005.

Roy Kessinger; Kanchan Angal; Steve Brewer; Steve Kraihanzel; Lenny Schrank; Jason Wolf

2003-07-15T23:59:59.000Z

445

Use of auxiliary psychiatric treatment during a 5-year follow-up among patients receiving short- or long-term psychotherapy  

Science Journals Connector (OSTI)

Background The need for treatment is, despite of its obvious usefulness, a scarcely used measure of effectiveness in psychotherapy trials. This study considers changes in the need for auxiliary psychiatric treatment after starting short- and long-term psychotherapy and psychoanalysis. Methods Altogether 326 psychiatric outpatients with mood or anxiety disorder were randomly assigned to solution-focused therapy (SFT), short-term psychodynamic psychotherapy (SPP), or long-term psychodynamic psychotherapy (LPP) while 41 self-selected patients were allocated to psychoanalysis (PA). The patients were followed for 5 years from start of treatment. Outcome measures were use of auxiliary psychotherapy, psychotropic medication, and hospitalization for mental reasons. Results About 60% of the patients used auxiliary treatment during the follow-up. It was most common in the short-term therapy groups and its incidence was highest during the first year after the start of therapy. The average numbers of all therapy sessions among patients starting the therapy were 60, 70, 240, and 670 in SFT, SPP, LPP, and PA, respectively, whereas the corresponding average numbers of study therapy sessions alone were 10, 19, 232, and 646. Over 50% of the patients receiving short-term therapy received on average 4–6 times more therapy sessions than initially assigned. Limitations Post-randomization withdrawal was uneven. Conclusions Auxiliary treatment is usual among patients receiving short- and long-term therapies, and apparently becomes common shortly after the start of treatment. Auxiliary treatment can be used as an outcome measure indicating the need for treatment, should be monitored clinically and considered when interpreting the results of effectiveness studies.

Paul Knekt; Olavi Lindfors; Camilla Renlund; Laura Sares-Jäske; Maarit A. Laaksonen; Esa Virtala

2011-01-01T23:59:59.000Z

446

United States Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 6 United States Department of Energy Southeastern Power Administration Wholesale Power Rate Schedule CK-1-H Availability: This rate schedule shall be available to public bodies served through the facilities of Kentucky Utilities Company, (hereinafter called the Customers.) Applicability: This rate schedule shall be applicable to electric capacity and energy available from the Dale Hollow, Center Hill, Wolf Creek, Cheatham, Old Hickory, Barkley, J. Percy Priest, and Cordell Hull Projects (all of such projects being hereinafter called collectively the "Cumberland Projects") and sold in wholesale quantities. Character of Service: The electric capacity and energy supplied hereunder will be three-phase alternating current at a nominal frequency of 60 hertz. The power shall be delivered at nominal voltages

447

Solergy Power | Open Energy Information  

Open Energy Info (EERE)

Solergy Power Solergy Power Jump to: navigation, search Name Solergy Power Place London, United Kingdom Zip SW1 OBD Sector Renewable Energy, Solar Product String representation "At Solergy Powe ... ade and beyond." is too long. References Solergy Power[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Solergy Power is a company located in London, United Kingdom . References ↑ "Solergy Power" Retrieved from "http://en.openei.org/w/index.php?title=Solergy_Power&oldid=351469" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load)

448

World electric power plants database  

SciTech Connect

This global database provides records for 104,000 generating units in over 220 countries. These units include installed and projected facilities, central stations and distributed plants operated by utilities, independent power companies and commercial and self-generators. Each record includes information on: geographic location and operating company; technology, fuel and boiler; generator manufacturers; steam conditions; unit capacity and age; turbine/engine; architect/engineer and constructor; and pollution control equipment. The database is issued quarterly.

NONE

2006-06-15T23:59:59.000Z

449

Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit-1: Analysis of core damage frequency from internal events during mid-loop operations. Appendix I, Volume 2, Part 5  

SciTech Connect

Traditionally, probabilistic risk assessments (PRA) of severe accidents in nuclear power plants have considered initiating events potentially occurring only during full power operation. Some previous screening analyses that were performed for other modes of operation suggested that risks during those modes were small relative to full power operation. However, more recent studies and operational experience have implied that accidents during low power and shutdown could be significant contributors to risk. During 1989, the Nuclear Regulatory Commission (NRC) initiated an extensive program to carefully examine the potential risks during low power and shutdown operations. The program includes two parallel projects being performed by Brookhaven National Lab. (BNL) and Sandia National Labs. (SNL). Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the plants to be studied. The objectives of the program are to assess the risks of severe accidents initiated during plant operational states other than full power operation and to compare the estimated core damage frequencies, important accident sequences and other qualitative and quantitative results with those accidents initiated during full power operation as assessed in NUREG-1150. The objective of this volume of the report is to document the approach utilized in the level-1 internal events PRA for the Surry plant, and discuss the results obtained. A phased approach was used in the level-1 program. In phase 1, which was completed in Fall 1991, a coarse screening analysis examining accidents initiated by internal events (including internal fire and flood) was performed for all plant operational states (POSs). The objective of the phase 1 study was to identify potential vulnerable plant configurations, to characterize (on a high, medium, or low basis) the potential core damage accident scenarios, and to provide a foundation for a detailed phase 2 analysis.

Chu, T.L.; Musicki, Z.; Kohut, P.; Yang, J.; Bozoki, G.; Hsu, C.J.; Diamond, D.J. [Brookhaven National Lab., Upton, NY (United States); Bley, D.; Johnson, D. [PLG Inc., Newport Beach, CA (United States); Holmes, B. [AEA Technology, Dorset (United Kingdom)] [and others

1994-06-01T23:59:59.000Z

450

A comparison of RETRAN-02 and TRAC-PF1 simulations of a loss of off-site power cooldown to residual heat removal entry conditions at Calvert Cliffs Nuclear Power Plant  

SciTech Connect

As a part of the U.S. Nuclear Regulatory Commission's unresolved safety issue A-45 decay heat removal program, the Los Alamos National Laboratory (LANL) performed a TRAC-PF1 simulation of the Calvert Cliffs Unit 1 pressurized water reactor in a cooldown to residual heat removal (RHR) entry conditions after a loss of off-site power (LOSP). A detailed four-loop TRAC model developed for the A-49 pressurized thermal shock program was used. The LANL results indicated an inability to both cool down and depressurize the primary system sufficiently to meet RHR entry conditions using only the atmospheric dump valves and auxiliary pressurizer spray. A RETRAN-02/MOD3 analysis was performed for the same transient, using assumptions consistent with those in the LANL analysis. A fast-running one loop RETRAN model was selected because of the inherent symmetry of the transient. The RETRAN results compared well with sensitivity analyses indicating that the pressurizer model dominates the transient signatures. A best estimate RETRAN analysis of the cooldown was performed using a more accurate set of assumptions to better understand actual plant operational responses. These results indicate that RHR entry could be achieved after an LOSP using only existing plant equipment and procedures.

Cook, T.L.; Mirsky, S.M.

1987-01-01T23:59:59.000Z

451

Wind Powering America Webinar: Wind Power Economics: Past, Present, and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wind Powering America Webinar: Wind Power Economics: Past, Present, Wind Powering America Webinar: Wind Power Economics: Past, Present, and Future Trends Wind Powering America Webinar: Wind Power Economics: Past, Present, and Future Trends November 23, 2011 - 1:43pm Addthis Wind turbine prices in the United States have declined, on average, by nearly one-third since 2008, after doubling from 2002 through 2008. Over this entire period, the average nameplate capacity rating, hub height, and rotor swept area of turbines installed in the United States have increased significantly, while other design improvements have also boosted turbine energy production. In combination, these various trends have had a significant-and sometimes surprising-impact on the levelized cost of energy delivered by wind projects. This webinar will feature three related presentations that explore these

452

STATEMENT OF CONSIDERATIONS REQUEST BY UNITED TECHNOLOGIES CORPORATION (UNITED  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RTGHTS TO INVENTIONS MADE UNDER RTGHTS TO INVENTIONS MADE UNDER COOPERATIVE AGREEMENT NUMBER DE-FC04-02AL67628, DOE WAIVER NO. W(A) 02-038. The Petitioner, United Technologies, acting through the United Technologies Research Center (UTRC), has requested a waiver of all domestic and foreign patent iights to inventions that may be conceived or first actually reduced to practice in the course of UTRC's work as the prime contractor under Cooperative Agreement Number DI-FC04- 02AL67628 entitled "On-Board Vehicle, Cost Effective, Hydrogen Enhancement Technology PEM Fuel Cells" with the U S. Department of Energy (DOE). The work to be done will be the development and fabrication of an integrated high temperature water gas shift reactor/hydrogen separator for use in a PEM fuel cell power

453

Geothermal electric power plant status  

SciTech Connect

A status summary of the activity for the 44 proposed geothermal electric power plants in the United States as of March 31, 1981 is presented, as well as the power on-line electric plants to date. The information comes from the Department of Energy Geothermal Progress Monitor System (DOE, 1981).

Murphy, M.; Entingh, D.J.

1981-10-01T23:59:59.000Z

454

New York Nuclear Profile - Power Plants  

U.S. Energy Information Administration (EIA) Indexed Site

nuclear power plants, summer capacity and net generation, 2010" nuclear power plants, summer capacity and net generation, 2010" "Plant name/total reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear net generation (percent)","Owner" "Indian Point Unit 2, Unit 3","2,063","16,321",39.0,"Entergy Nuclear Indian Point" "James A Fitzpatrick Unit 1",855,"6,361",15.2,"Entergy Nuc Fitzpatrick LLC" "Nine Mile Point Nuclear Station Unit 1, Unit 2","1,773","14,239",34.0,"Nine Mile Point Nuclear Sta LLC" "R E Ginna Nuclear Power Plant Unit 1",581,"4,948",11.8,"R.E. Ginna Nuclear Power Plant, LLC" "4 Plants

455

Developement of a digitally controlled low power single phase inverter for grid connected solar panel.  

E-Print Network (OSTI)

?? The work consists in developing a power conversion unit for solar panel connected to the grid. This unit will be a single phase inverter… (more)

Marguet, Raphael

2010-01-01T23:59:59.000Z

456

Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1: Analysis of core damage frequency from internal events during mid-loop operations, Appendices A--D. Volume 2, Part 2  

SciTech Connect

During 1989, the Nuclear Regulatory Commission (NRC) initiated an extensive program to carefully examine the Potential risks during low Power and shutdown operations. The program includes two parallel projects being performed by Brookhaven National Laboratory (BNL) and Sandia National Laboratories (SNL). Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the Plants to be studied. The objectives of the program are to assess the risks of severe accidents initiated during plant operational states other than full power operation and to compare the estimated core damage frequencies, important accident sequences and other qualitative and quantitative results with those accidents initiated during full power operation as assessed in NUREG-1150. The objective of this report is to document the approach utilized in the Surry plant and discuss the results obtained. A parallel report for the Grand Gulf plant is prepared by SNL. This study shows that the core-damage frequency during mid-loop operation at the Surry plant is comparable to that of power operation. We recognize that there is very large uncertainty in the human error probabilities in this study. This study identified that only a few procedures are available for mitigating accidents that may occur during shutdown. Procedures written specifically for shutdown accidents would be useful. This document, Volume 2, Pt. 2 provides appendices A through D of this report.

Chu, T.L.; Musicki, Z.; Kohut, P. [Brookhaven National Lab., Upton, NY (United States)] [and others

1994-06-01T23:59:59.000Z

457

Estimated United States Transportation Energy Use 2005  

SciTech Connect

A flow chart depicting energy flow in the transportation sector of the United States economy in 2005 has been constructed from publicly available data and estimates of national energy use patterns. Approximately 31,000 trillion British Thermal Units (trBTUs) of energy were used throughout the United States in transportation activities. Vehicles used in these activities include automobiles, motorcycles, trucks, buses, airplanes, rail, and ships. The transportation sector is powered primarily by petroleum-derived fuels (gasoline, diesel and jet fuel). Biomass-derived fuels, electricity and natural gas-derived fuels are also used. The flow patterns represent a comprehensive systems view of energy used within the transportation sector.

Smith, C A; Simon, A J; Belles, R D

2011-11-09T23:59:59.000Z

458

High power  

Science Journals Connector (OSTI)

... 1970s technomanic projects such as nuclear power stations were still in vogue. Environmentalists argued that solar power seemed a far safer, cheaper and reassuringly low-tech power source. The technomaniacs ... tech power source. The technomaniacs, fearing that they were losingthis argument, sought to hijack solar power themselves. They proposed an enormously expensive and complicated ...

David Jones

1994-03-03T23:59:59.000Z

459

United Illuminating | Open Energy Information  

Open Energy Info (EERE)

Illuminating Illuminating Jump to: navigation, search Logo: United Illuminating Name United Illuminating Address 157 Church St Place New Haven, Connecticut Zip 06510 Sector Services Product Green Power Marketer Website http://www.uinet.com/ Coordinates 41.3073289°, -72.9247896° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.3073289,"lon":-72.9247896,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

460

Solar energy power generators with advanced thermionic converters for spacecraft applications  

SciTech Connect

This study presents (1) a 50 kW/sub e/ solar energy generator in a geostationary orbit for direct tv-broadcasting and (2) a 10 GW/sub e/ space power plant, with the basic engineering outlines using an advanced thermionic converter proposal given for each. Further, a comparison of the main technical data for the generators with corresponding energy output using (1) advanced thermionic converter and (2) ordinary thermionic converter without auxiliary emitter is shown. 25 refs.

Sahin, S.

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Minnesota Power - Power Grant Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Minnesota Power - Power Grant Program Minnesota Power - Power Grant Program Minnesota Power - Power Grant Program < Back Eligibility Agricultural Commercial Industrial Savings Category Other Maximum Rebate 0 to 100 kW: $10,000 101 to 300 kW: $25,000 Over 300 kW: $50,000 Program Info State Minnesota Program Type Utility Grant Program Rebate Amount $200/kW rebate Provider Minnesota Power Minnesota Power Grant Program offers grants of up to $50,000 to its commercial, industrial, and agricultural customers who use innovative technologies, improve manufacturing processes, undertake renewable electric energy projects or who need project design assistance. Eligible projects include renewable energy products, new electro-technologies that lower energy costs per unit of production in a manufacturing process, innovative

462

Ex Post Analysis of Economic Impacts from Wind Power Development in U.S. Counties  

E-Print Network (OSTI)

use requirements of modern wind power plants in the United2002. Economic impacts of wind power in Kittitas County:Renewable energy: Wind power’s contribution to electric

Brown, Jason P.

2014-01-01T23:59:59.000Z

463

Comparison between the measured and calculated reactivity in measuring the effectiveness of the emergency protection at the stage of physical start-up of unit no. 3 at the Kalinin nuclear power plant  

SciTech Connect

This paper presents comparisons between the effectiveness of the emergency protection under both stationary and nonstationary formulations calculated with the use of the RADUGA-7.5 package and experimental data obtained in measuring the 'weight' of the emergency protection in the process of physical start-up of the VVER-1000 reactor of unit no. 3 of the Kalinin NPP. On the basis of the results obtained, recommendations are given on comparing the measured and calculated reactivity and parameters determined by using its value.

Kavun, O. Yu.; Popykin, A. I.; Shevchenko, R. A., E-mail: rshevchenko@secnrs.ru; Shevchenko, S. A. [Scientific and Engineering Center for Nuclear and Radiation Safety (Russian Federation)

2012-12-15T23:59:59.000Z

464

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

in Buildings" "With 5 or More Units)",19.1,4.4,1,0.5,0.5,3.4,2.4,0.6,0.5 "FoundationBasement of Single-Family" "Units and Apartments in Buildings With" "2 to 4 Units...

465

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

"With 5 or More Units)",19.1,2.3,16.8,"N","N","N","N","N","N",2.3,16.8,"N","N" "FoundationBasement of Single-Family" "Units and Apartments in Buildings With" "2 to 4 Units...

466

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

in Buildings" "With 5 or More Units)",19.1,2,0.7,1.3,2.6,4.1,3.5,2.5,2.4 "FoundationBasement of Single-Family" "Units and Apartments in Buildings With" "2 to 4 Units...

467

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

"With 5 or More Units)",19.1,6.2,3.5,0.5,0.5,1.1,0.6,"Q",0.7,0.4,0.2,2,1.4,0.6 "FoundationBasement of Single-Family" "Units and Apartments in Buildings With" "2 to 4 Units...

468

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Buildings" "With 5 or More Units)",19.1,4.7,0.9,0.4,0.3,"Q",0.6,0.4,"Q",3.8,2.9,0.9 "FoundationBasement of Single-Family" "Units and Apartments in Buildings With" "2 to 4 Units...

469

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

in Buildings" "With 5 or More Units)",19.1,3.7,2.7,0.9,0.6,0.3,0.9,1,0.2,0.6,0.2 "FoundationBasement of Single-Family" "Units and Apartments in Buildings With" "2 to 4 Units...

470

Unit Testing Discussion C  

E-Print Network (OSTI)

Unit Testing Discussion C #12;Unit Test public Method is smallest unit of code Input/output transformation Test if the method does what it claims Not exactly black box testing #12;Test if (actual result Expected Computed Input #12;Functionality Computation ­ Easy to test Time based Asynchronous interaction

Massachusetts at Amherst, University of

471

Power Marketing  

NLE Websites -- All DOE Office Websites (Extended Search)

UGPS' Marketing Service Area Power Marketing As a marketer of Federal power in the Upper Great Plains Region, the Power Marketing staff provides a variety of services for customers...

472

Revised?Confirmatory Survey Report for Portions of the Auxiliary Building Structural Surfaces and Turbine Building Embedded Piping, Rancho Seco Nuclear Generating Station, Herald, California  

SciTech Connect

During the period of October 15 and 18, 2007, ORISE performed confirmatory radiological survey activities which included beta and gamma structural surface scans and beta activity direct measurements within the Auxiliary Building, beta or gamma scans within Turbine Building embedded piping, beta activity determinations within Turbine Building Drain 3-1-27, and gamma scans and the collection of a soil sample from the clay soils adjacent to the Lower Mixing Box.

W. C. Adams

2007-12-07T23:59:59.000Z

473

Confirmatory Survey Report for Portions of the Auxiliary Building Structural Surfaces and Turbine Building Embedded Piping, Rancho Seco Nuclear Generating Station, Herald, CA  

SciTech Connect

During the period of October 15 and 18, 2007, ORISE performed confirmatory radiological survey activities which included beta and gamma structural surface scans and beta activity direct measurements within the Auxiliary Building, beta or gamma scans within Turbine Building embedded piping, beta activity determinations within Turbine Building Drain 3-1-27, and gamma scans and the collection of a soil sample from the clay soils adjacent to the Lower Mixing Box.

W. C. Adams

2007-12-07T23:59:59.000Z

474

PowerPoint Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Association Association S.2900 Reducing the Electric Power Carbon Footprint October 20, 2010 Richard S. Tuthill, Chair Board of Directors Gas Turbine Association 2 * Alstom Power * Florida Turbine Technologies * General Electric * Rolls Royce * Siemens Energy * Solar Turbines * Strategic Power Systems * United Technologies * Vibro Meter Gas Turbine Association 3 S.2900 * Introduced By Senator Kirsten Gillibrand (D-NY) * Prime Objective is to Fund Ground Power Gas Turbine Technologies - Raise Natural Gas Fired Gas Turbine Efficiencies â—‹ Phase One - Combined Cycle > 62%, Simple Cycle > 47% â—‹ Phase Two - Combined Cycle > 65%, Simple Cycle > 50% - Authorizes $340M Over Four Years ($85M per Year) - Combined Cycle, Simple Cycle, CHP, All Engine Sizes * Similar Bill Has Passed the US House (Under Suspension of Rules)

475

Southwestern Power Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

Skip Navigation Links Skip Navigation Links Annual Performance Plan Annual Report Mission Organization Strategic Plan SWPA - Overview Video System Map About the Agency Southwestern Power Administration was established in 1943 by the Secretary of the Interior as a Federal Agency that today operates within the Department of Energy under the authority of Section 5 of the Flood Control Act of 1944. As one of four Power Marketing Administrations in the United States, Southwestern markets hydroelectric power in Arkansas, Kansas, Louisiana, Missouri, Oklahoma, and Texas from 24 U.S. Army Corps of Engineers multipurpose dams. By law, Southwestern's power is marketed and delivered primarily to public bodies such as rural electric cooperatives and municipal utilities. Southwestern has over one hundred such "preference" customers, and these

476

PowerPoint Presentation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FACTS Control for Long- and Short- FACTS Control for Long- and Short- Term Energy Storage Mehdi Ferdowsi Missouri University of Science and Technology Funded by the Energy Storage Systems Program of the U.S. Department Of Energy (DOE/ESS) through Sandia National Laboratories (SNL). Sandia is a multi-program laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration, under contract DE-AC04-94AL85000. Issues * Short- and Long-Term Energy Storage * Storage Integration * Cyber Security 33 v v Transmission Line Generation FACTS Wind Power Energy Storage Solar Power Energy Storage FACTS Device Distributed Decisions Power Electronics Communications Sensing and monitoring Inputs Power Electronics

477

Water Power Technologies Office FY 2015 Budget At-A-Glance  

Energy Savers (EERE)

Water Power Technologies Office leads efforts in developing innovative water power technologies to help the United States meet its growing energy demand. The Office is pioneering...

478

Generation Scheduling for Power Systems with Demand Response and a High Penetration of Wind Energy.  

E-Print Network (OSTI)

??With renewable energy sources and demand response programs expanding in many power systems, traditional unit commitment and economic dispatch approaches are inadequate. The power system… (more)

Liu, Guodong

2014-01-01T23:59:59.000Z

479

U.S. Department of Energy Wind and Water Power Program Funding...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Technologies Office Funding in the United States: MARINE AND HYDROKINETIC ENERGY PROJECTS Fiscal Years 2008 - 2014 WIND AND WATER POWER TECHNOLOGIES OFFICE WIND AND WATER POWER...

480

Electric Power | OpenEI  

Open Energy Info (EERE)

Power Power Dataset Summary Description This dataset comes from the Energy Information Administration (EIA), and is part of the 2011 Annual Energy Outlook Report (AEO2011). This dataset is table 95, and contains only the reference case. The data is broken down into electric power sector, cumulative planned additions,cumulative unplanned additions,cumulative retirements, end-use sector, electricity sales, net energy for load, generation by fuel type and price by service category. Source EIA Date Released April 26th, 2011 (3 years ago) Date Updated Unknown Keywords 2011 AEO EIA Electric Power projections United States Data application/vnd.ms-excel icon AEO2011: Electric Power Projections for EMM Region - United States- Reference Case (xls, 260.9 KiB) Quality Metrics

Note: This page contains sample records for the topic "auxiliary power unit" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Definition: Power | Open Energy Information  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Definition Edit with form History Facebook icon Twitter icon » Definition: Power Jump to: navigation, search Dictionary.png Power The rate of producing, transferring, or using energy; the amount of energy or work expended in a given amount of time. Power is usually measured in watts.[1][2] View on Wikipedia Wikipedia Definition In physics, power is defined as the amount of energy consumed per unit time. In the MKS system, the unit of power is the joule per second (J/s), known as the watt (in honour of James Watt, the eighteenth-century developer of the steam engine). For example, the rate at which a light bulb

482

ForPeerReview PUBLIC ACCEPTANCE OF OFFSHORE WIND POWER  

E-Print Network (OSTI)

ForPeerReview PUBLIC ACCEPTANCE OF OFFSHORE WIND POWER PROJECTS IN THE UNITED STATES Journal: Wind, Andrew; Minerals Management Service Keywords: offshore wind power, public opinion, social acceptancePeerReview 1 PUBLIC ACCEPTANCE OF OFFSHORE WIND POWER PROJECTS IN THE UNITED STATES Jeremy Firestone*, Willett

Firestone, Jeremy

483

Residential Wind Power  

E-Print Network (OSTI)

” Figure 3. “Wind Generators in Iowa – 2” Figure 4. “State Wind Power Capacity 2007” Figure 5. Annual average wind resource estimates in the contiguous United States (http://rredc.nrel.gov) Figure 6. “SkyStream Design Overview” Figure 7... crisis that raises crude oil prices hampering the price at the pump or commodity production and transportation. Many people do not even take the time to think about the impact to daily life that power and changes within the market play on their lives...

Willis, Gary

2011-12-16T23:59:59.000Z

484

How Financial Transmission Rights Curb Market Power  

E-Print Network (OSTI)

PWP-049 How Financial Transmission Rights Curb Market Power Steven Stoft June 1997 This paper is part of the working papers series of the Program on Workable Energy Regulation (POWER). POWER is a program of the University of California Energy Institute, a multicampus research unit of the University

California at Berkeley. University of

485

Bonneville Power to evaluate Hydra fuel cell  

Science Journals Connector (OSTI)

Oregon-based Hydra Fuel Cell Corporation is to deliver a beta unit of its proprietary HydraStax™ hydrogen PEM fuel cell to be tested by the Bonneville Power Administration, a major wholesale power producer in the Pacific Northwest of the US. The HydraStax technology is designed for fixed power applications up to 40 kW.

2006-01-01T23:59:59.000Z

486

Voltage, energy and power in electric circuits  

E-Print Network (OSTI)

Voltage, energy and power in electric circuits Science teaching unit #12;Disclaimer The Department-2008DVD-EN Voltage, energy and power in electric circuits #12;#12;© Crown copyright 2008 1The National Strategies | Secondary Voltage, energy and power in electric circuits 00094-2008DVD-EN Contents Voltage

Berzins, M.

487

Method of Reducing the Error of Transferring the Size of a Unit of Laser Radiation Energy  

Science Journals Connector (OSTI)

A method is considered of reducing the error of transferring the size of a unit of laser radiation energy for a secondary standard of the units of average power and energy of laser radiation by using the readi...

A. N. Shchipunov

2002-10-01T23:59:59.000Z

488

Auxiliary International Languages1  

Science Journals Connector (OSTI)

... , their labours being embodied in a very masterly book entitled "Histoire de la Langue Universelle,"and also in another one entitled "Les Nouvelles Langues Internationales."Their Report to ...

F. G. DONNAN

1922-04-15T23:59:59.000Z

489

New Geothermal Prospects in the Western United States Show Promise  

Energy.gov (U.S. Department of Energy (DOE))

New geothermal prospects in the western United States show promise, according to the new 2013 Annual U.S. Geothermal Power Production and Development Report, published by the Geothermal Energy Association this week.

490

Modified Orbital Branching with Applications to Orbitopes and to Unit ...  

E-Print Network (OSTI)

Oct 27, 2012 ... [1] Arroyo, J.M., Conejo, A.J.: Optimal response of a thermal unit to an electricity spot market. IEEE Transactions on Power Systems 15(3), 1098 ...

2012-10-27T23:59:59.000Z

491

Energy Recovery System for Fluid Catalytic Cracking Units  

E-Print Network (OSTI)

This paper describes the power and heat recovery processes and equipment for modern fluid catalytic cracking (FCC) units made possible by improvements in catalyst fines removal technology and the availability of erosion resistant high temperature...

Wen, H.; Lou, S. C.

1982-01-01T23:59:59.000Z

492

Nuclear Energy In the United States Executive Summary  

NLE Websites -- All DOE Office Websites (Extended Search)

0 Status and Outlook for Nuclear Energy In the United States Executive Summary The U.S. nuclear power industry continues to make pro- gress toward the construction of new nuclear...

493

H-.0/2 STATEMENT OF CONSIDERATIONS REQUEST BY CHEVRONTEXACO  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

diesel fuel for use in a solid oxide fuel cell auxiliary power unit intended for use on diesel trucks and remote stationary power applications using a sulfur resistant low cost...

494

PowerPoint Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

project was authorized by the Flood Control Act approved 18 project was authorized by the Flood Control Act approved 18 August 1941 (Public No. 228, 77 th Congress, 1 st Session). Construction of the access road began in April 1946. Construction of Narrows Dam started in May 1947 and the structure was essentially completed by July 1950. Commercial operation began May 1950 on Units #1 and #2. Commercial operation began September 1969 on Unit #3. The Narrow Dam is located on the Little Missouri River, a tributary of the Ouachita River near Murfreesboro in Pike County, Arkansas. It is a multi-purpose project for flood and power generation. Maximum Pool 7,260 Acres Shoreline 134 Miles Type Concrete Gravity Crest Elevation 581 Feet,msl Spillway Type Concrete, Uncontrolled Spillway Crest Elevation 563 Feet,msl Number of Units

495

Biofuels Atlas (United States) | Open Energy Information  

Open Energy Info (EERE)

Biofuels Atlas (United States) Biofuels Atlas (United States) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Biofuels Atlas (United States) Focus Area: Clean Transportation Topics: Potentials & Scenarios Website: maps.nrel.gov/biomass Equivalent URI: cleanenergysolutions.org/content/biofuels-atlas-united-states,http://c Language: English Policies: Deployment Programs DeploymentPrograms: Technical Assistance Biofuels Atlas is an interactive map that allows users to compare biomass feedstocks and biofuels by location. Users may select from and apply biomass data layers to a map as well as query and download biofuels and feedstock data. The state zoom function summarizes state energy use and infrastructure for traditional and bioenergy power, fuels, and resources. The tool also calculates the biofuels potential for a given area.

496

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

1 Space Heating in U.S. Homes in West Region, Divisions, and States, 2009" " Million Housing Units, Final" ,,"West Census Region" ,,,"Mountain Census Division",,,"Pacific...

497

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

0 Household Demographics of Homes in South Region, Divisions, and States, 2009" " Million Housing Units, Final" ,,"South Census Region" ,,,"South Atlantic Census...

498

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

0 Fuels Used and End Uses in Homes in South Region, Divisions, and States, 2009" " Million Housing Units, Final" ,,"South Census Region" ,,,"South Atlantic Census...

499

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

1 Household Demographics of Homes in West Region, Divisions, and States, 2009" " Million Housing Units, Final" ,,"West Census Region" ,,,"Mountain Census Division",,,"Pacific...

500

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

HC.1.11 Fuels Used and End Uses in Homes in West Region, Divisions, and States, 2009" " Million Housing Units, Final" ,,"West Census Region" ,,,"Mountain Census...