National Library of Energy BETA

Sample records for automotive systems llc

  1. United States Automotive Materials Partnership LLC (USAMP)

    SciTech Connect (OSTI)

    United States Automotive Materials Partnership

    2011-01-31

    The United States Automotive Materials Partnership LLC (USAMP) was formed in 1993 as a partnership between Chrysler Corporation, Ford Motor Company, and General Motors Corporation. Since then the U.S. Department of Energy (DOE) has supported its activities with funding and technical support. The mission of the USAMP is to conduct vehicle-oriented research and development in materials and materials processing to improve the competitiveness of the U.S. Auto Industry. Its specific goals are: (1) To conduct joint research to further the development of lightweight materials for improved automotive fuel economy; and (2) To work with the Federal government to explore opportunities for cooperative programs with the national laboratories, Federal agencies such as the DOE and universities. As a major component of the DOE's Office of FreedomCAR and Vehicle Technologies Program (FCVT) collaboration with the USAMP, the Automotive Lightweighting Materials (ALM) program focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. The FCVT was announced in FY 2002 and implemented in FY 2003, as a successor of the Partnership for a New Generation of Vehicles (PNGV), largely addressed under the first Cooperative Agreement. This second USAMP Cooperative Agreement with the DOE has expanded a unique and valuable framework for collaboratively directing industry and government research efforts toward the development of technologies capable of solving important societal problems related to automobile transportation. USAMP efforts are conducted by the domestic automobile manufacturers, in collaboration with materials and manufacturing suppliers, national laboratories, universities, and other technology or trade organizations. These interactions provide a direct route for implementing newly developed materials and technologies, and have resulted in significant technical successes to date, as discussed in the individual project summary final reports. Over 70 materials-focused projects have been established by USAMP, in collaboration with participating suppliers, academic/non-profit organizations and national laboratories, and executed through its original three divisions: the Automotive Composites Consortium (ACC), the Automotive Metals Division (AMD), and Auto/Steel Partnership (A/SP). Two new divisions were formed by USAMP in 2006 to drive research emphasis on integration of structures incorporating dissimilar lightweighting materials, and on enabling technology for nondestructive evaluation of structures and joints. These new USAMP divisions are: Multi-Material Vehicle Research and Development Initiative (MMV), and the Non-Destructive Evaluation Steering Committee (NDE). In cooperation with USAMP and the FreedomCAR Materials Technical Team, a consensus process has been established to facilitate the development of projects to help move leveraged research to targeted development projects that eventually migrate to the original equipment manufacturers (OEMs) as application engineering projects. Research projects are assigned to one of three phases: concept feasibility, technical feasibility, and demonstration feasibility. Projects are guided through ongoing monitoring and USAMP offsite reviews, so as to meet the requirements of each phase before they are allowed to move on to the next phase. As progress is made on these projects, the benefits of lightweight construction and enabling technologies will be transferred to the supply base and implemented in production vehicles. The single greatest barrier to automotive use of lightweight materials is their high cost; therefore, priority is given to activities aimed at reducing costs through development of new materials, forming technologies, and manufacturing processes. The emphasis of the research projects reported in this document was largely on applied research and evaluation of mass savings opportunities thro

  2. Automotive Energy Storage Systems 2015

    Broader source: Energy.gov [DOE]

    Automotive Energy Storage Systems 2015, the ITB Group’s 16th annual technical conference, was held from March 4–5, 2015, in Novi, Michigan.

  3. Bannon Automotive LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar Energy LLC Jump to:Greece:Bajo en Carbono, MexicoBanham Poultry Jump

  4. Embedded Automotive System Development Process

    E-Print Network [OSTI]

    Langenwalter, Joachim

    2011-01-01

    Model based design enables the automatic generation of final-build software from models for high-volume automotive embedded systems. This paper presents a framework of processes, methods and tools for the design of automotive embedded systems. A steer-by-wire system serves as an example.

  5. Looking From A Hilltop: Automotive Propulsion System Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Looking From A Hilltop: Automotive Propulsion System Technology Looking From A Hilltop: Automotive Propulsion System Technology Outlook for global fuel economy requirements and...

  6. Flexibility in Aerospace and Automotive Component Manufacturing Systems

    E-Print Network [OSTI]

    de Weck, Olivier L.

    Flexibility in Aerospace and Automotive Component Manufacturing Systems: Practice, Strategy Supervisor #12;2 #12;Flexibility in Aerospace and Automotive Component Manufacturing Systems: Practice Traditionally, parts fabrication in the aerospace and automotive industries has been associated with a number

  7. System level modeling of thermoelectric generators for automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    level modeling of thermoelectric generators for automotive applications System level modeling of thermoelectric generators for automotive applications Uses a model to predict and...

  8. Detection of arcs in automotive electrical systems

    E-Print Network [OSTI]

    Mishrikey, Matthew David

    2005-01-01

    At the present time, there is no established method for the detection of DC electric arcing. This is a concern for forthcoming advanced automotive electrical systems which consist of higher DC electric power bus voltages, ...

  9. Backup strategy for robots' failures in an automotive assembly system

    E-Print Network [OSTI]

    Ben-Gal, Irad E.

    history: Received 23 October 2006 Accepted 16 September 2007 Keywords: Automotive industry Assembly lines in the automotive industry High-volume body-shop systems in the automotive industry often consist of a seriesBackup strategy for robots' failures in an automotive assembly system Tomer Kahan a , Yossi Bukchin

  10. ORIGINAL ARTICLE On credibility improvements for automotive navigation systems

    E-Print Network [OSTI]

    Ulm, Universität

    ORIGINAL ARTICLE On credibility improvements for automotive navigation systems Florian Schaub The Author(s) 2012. This article is published with open access at Springerlink.com Abstract Automotive effects on perceived credibility. Keywords Automotive navigation systems Á ANS Á Credibility Á Automotive

  11. Holistic Data-Driven Diagnosis for Dependable Automotive Systems

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    Holistic Data-Driven Diagnosis for Dependable Automotive Systems Patrick E. Lanigan Carnegie Mellon, emer- gent behavior will still appear at runtime in dependable automotive systems. Such behavior occurs The automotive industry has become steadily more reliant on software- intensive distributed systems to imple

  12. Design of automotive X-by-Wire systems Cdric Wilwert

    E-Print Network [OSTI]

    Navet, Nicolas

    Design of automotive X-by-Wire systems Cédric Wilwert PSA Peugeot - Citroën 92000 La Garenne Phone : +33 3 83 58 17 62 simonot@loria.fr CONTENTS Design of automotive X-by-Wire systems ................................................................................................................................ 9 3.2 Main time-triggered protocols for automotive industry

  13. STATISTICAL SIGNAL PROCESSING FOR AUTOMOTIVE SAFETY SYSTEMS Fredrik Gustafsson

    E-Print Network [OSTI]

    Gustafsson, Fredrik

    STATISTICAL SIGNAL PROCESSING FOR AUTOMOTIVE SAFETY SYSTEMS Fredrik Gustafsson Department The amount of software in general and safety systems in particular increases rapidly in the automotive- cessing area. 1. INTRODUCTION Henry Ford revolutionized the automotive industry more than 100 years ago

  14. Service-Oriented Modelling of Automotive Systems Laura Bocchi

    E-Print Network [OSTI]

    Ulidowski, Irek

    Service-Oriented Modelling of Automotive Systems Laura Bocchi Department of Computer Science@di.fc.ul.pt ABSTRACT We discuss the suitability of service-oriented computing for the automotive domain. We present a formal high-level language in which complex automotive activities can be modelled in terms of core

  15. Webinar: Automotive and MHE Fuel Cell System Cost Analysis

    Broader source: Energy.gov [DOE]

    Video recording and text version of the webinar titled, Automotive and MHE Fuel Cell System Cost Analysis, originally presented on April 16, 2013.

  16. Diagnosis in Automotive Systems: A Survey PATRICK E. LANIGAN, SOILA KAVULYA and PRIYA NARASIMHAN

    E-Print Network [OSTI]

    Diagnosis in Automotive Systems: A Survey PATRICK E. LANIGAN, SOILA KAVULYA and PRIYA NARASIMHAN-3890 Abstract Modern automotive electronic control systems are distributed, networked embedded systems was supported in part by General Motors Company. #12;Keywords: diagnosis, automotive, safety, agreement

  17. Thermoelectric Generators for Automotive Waste Heat Recovery Systems Part I: Numerical Modeling

    E-Print Network [OSTI]

    Xu, Xianfan

    Thermoelectric Generators for Automotive Waste Heat Recovery Systems Part I: Numerical Modeling (TEG) designed for automotive waste heat recovery systems. This model is capable of computing telluride TEMs. Key words: Thermoelectric generators, waste heat recovery, automotive exhaust, skutterudites

  18. Architectures of Automotive Electrical and Electronics (E/E) Systems

    E-Print Network [OSTI]

    Navet, Nicolas

    1 Architectures of Automotive Electrical and Electronics (E/E) Systems Nicolas Navet Complexity Mastered Teaching slides Can be freely used for teaching Outline 1. Architecture of Automotive Embedded processg gy ­ Lack of background in E/E at management level often mechanical background ­ Lack of clear

  19. Thermoelectric Generators for Automotive Waste Heat Recovery Systems Part II: Parametric Evaluation

    E-Print Network [OSTI]

    Xu, Xianfan

    Thermoelectric Generators for Automotive Waste Heat Recovery Systems Part II: Parametric Evaluation been proposed to model thermoelectric generators (TEGs) for automotive waste heat recovery. Details: Thermoelectric generators, waste heat recovery, automotive exhaust, skutterudites INTRODUCTION In part I

  20. Electromagnetic interference filter for automotive electrical systems

    DOE Patents [OSTI]

    Herron, Nicholas Hayden; Carlson, Douglas S; Tang, David; Korich, Mark D

    2013-07-02

    A filter for an automotive electrical system includes a substrate having first and second conductive members. First and second input terminals are mounted to the substrate. The first input terminal is electrically connected to the first conductive member, and the second input terminal is electrically connected to the second conductive member. A plurality of capacitors are mounted to the substrate. Each of the capacitors is electrically connected to at least one of the first and second conductive members. First and second power connectors are mounted to the substrate. The first power connector is electrically connected to the first conductive member, and the second power connector is electrically connected to the second conductive member. A common mode choke is coupled to the substrate and arranged such that the common mode choke extends around at least a portion of the substrate and the first and second conductive members.

  1. Technical Assessment of Compressed Hydrogen Storage Tank Systems for Automotive Applications

    SciTech Connect (OSTI)

    Hua, Thanh; Ahluwalia, Rajesh; Peng, J. -K; Kromer, Matt; Lasher, Stephen; McKenney, Kurtis; Law, Karen; Sinha, Jayanti

    2010-09-01

    This technical report describes DOE's assessment of the performance and cost of compressed hydrogen storage tank systems for automotive applications. The on-board performance (by Argonne National Lab) and high-volume manufacturing cost (by TIAX LLC) were estimated for compressed hydrogen storage tanks. The results were compared to DOE's 2010, 2015, and ultimate full fleet hydrogen storage targets. The Well-to-Tank (WTT) efficiency as well as the off-board performance and cost of delivering compressed hydrogen were also documented in the report.

  2. Functional Modeling Compiler for System-Level Design of Automotive Cyber-Physical Systems

    E-Print Network [OSTI]

    Al Faruque, Mohammad Abdullah

    Functional Modeling Compiler for System-Level Design of Automotive Cyber-Physical Systems Presented A typical Cyber-Physical System (CPS) such as the modern automotive includes not only the physical domains. An example of CPS: a modern automotive More than 70 ECUs More than 5 bus systems More than 10

  3. Strategic frameworks in automotive systems architecting

    E-Print Network [OSTI]

    Tampi, Mahesh

    2012-01-01

    More often than not, large-scale engineering concepts such as those used by creative automotive manufacturing companies require the incorporation of significant capital outlays and resources for the purposes of implementation ...

  4. Challenges in the Modeling and Quantitative Analysis of Safety-Critical Automotive Systems!

    E-Print Network [OSTI]

    Leue, Stefan

    Challenges in the Modeling and Quantitative Analysis of Safety-Critical Automotive Systems! #12;Joint work with! 2! Matthias Kuntz and Bernd Reh TRW Automotive Stefan Leue Univeristy of Konstanz #12;Outline! ! Safety-Critical Automotive Systems! Safety Analysis Methods in the Automotive Domain

  5. QER- Comment of Skibo Systems LLC

    Office of Energy Efficiency and Renewable Energy (EERE)

    Paul M. Klemencic, Skibo Systems LLC: Comments regarding the current state of all major energy markets, addressing customer costs and needs, infrastructure, market controls and optimization, and build out of green energy sources.

  6. MECHANOLOGY, LLC 1 Development of a Toroidal Intersecting Vane

    E-Print Network [OSTI]

    for Automotive Fuel Cell Systems Sterling Bailey Ph.D., P.E. Mechanology, LLC sterling@mechanology.com The focus to be engineered and integrated with the fuel cell and fuel processor so that the overall system meets packaging

  7. A co-simulation framework for design of time-triggered automotive cyber physical systems

    E-Print Network [OSTI]

    Koutsoukos, Xenofon D.

    A co-simulation framework for design of time-triggered automotive cyber physical systems Zhenkai Automotive control system SystemC a b s t r a c t Designing cyber-physical systems (CPS) is challenging due to the tight interactions between software, network/platform, and physical components. Automotive control sys

  8. Development of Educational System for Automotive Engineering based on Augmented Reality

    E-Print Network [OSTI]

    Ryu, Jee-Hwan

    Development of Educational System for Automotive Engineering based on Augmented Reality Ildar for automotive engineering education is introduced. Main objective of the system is teaching disassemble/assemble procedure of automatic transmission of a vehicle to students, who study automotive engineering. System

  9. A Hybrid Feedback Regulator Approach to Control an Automotive Suspension System

    E-Print Network [OSTI]

    Koutsoukos, Xenofon D.

    A Hybrid Feedback Regulator Approach to Control an Automotive Suspension System Xenofon D synthe- sis approach using an automotive suspension system. Discrete abstrac- tions are used control synthesis is presented and an example of an automotive suspension system is used to illus- trate

  10. Taming Uncertainties in Wireless Messaging for Automotive Cyber-Physical-Systems

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    Taming Uncertainties in Wireless Messaging for Automotive Cyber-Physical-Systems Hongwei Zhang Wireless networking for automotive CPS Today's vehicles are much more than a mechanical device, and complex to the scalability of vehicular communication system, which is a basic element of automotive cyber-physical systems

  11. COMET: A Component-Based Real-Time Database for Automotive Systems Dag Nystrom

    E-Print Network [OSTI]

    COMET: A Component-Based Real-Time Database for Automotive Systems Dag Nystr¨om , Aleksandra With the increase of complexity in automotive control systems, the amount of data that needs to be managed is also-constrained automotive control systems, denoted the COMET development suit. Using software engineer- ing tools to assist

  12. Multi-Disciplinary Integrated Design Automation Tool for Automotive Cyber-Physical Systems

    E-Print Network [OSTI]

    Al Faruque, Mohammad Abdullah

    Multi-Disciplinary Integrated Design Automation Tool for Automotive Cyber-Physical Systems for the development of multi-disciplinary automotive cyber- physical systems. We show how system-level simulation. INTRODUCTION The current automotive design process is complex and multi- disciplinary. The design is passed

  13. NREL: Transportation Research - Future Automotive Systems Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines lightGeospatial ToolkitSMARTSWorking With UsSimulator Future Automotive

  14. Trends in Automotive Communication Systems NICOLAS NAVET, YEQIONG SONG, FRANOISE SIMONOT-LION, AND CDRIC WILWERT

    E-Print Network [OSTI]

    Navet, Nicolas

    Trends in Automotive Communication Systems NICOLAS NAVET, YEQIONG SONG, FRANÇOISE SIMONOT imposed on the commu- nication systems. Then, a comprehensive review of the most widely used automotive networks, as well as the emerging ones, is given. Next, the current efforts of the automotive industry

  15. A Software-Oriented Floating-Point Format for Enhancing Automotive Control Systems

    E-Print Network [OSTI]

    Hwu, Wen-mei W.

    A Software-Oriented Floating-Point Format for Enhancing Automotive Control Systems Daniel A, yamada, hwug@crhc.uiuc.edu August 11, 1999 In recent years, the software of automotive control sys- tems- ber computation in automotive control systems by design- ing a new software-oriented floating

  16. Verifiable Active Safety for Automotive Cyber-Physical Systems with Humans in the Loop

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    Verifiable Active Safety for Automotive Cyber-Physical Systems with Humans in the Loop Francesco-6925 A recent trend in the automotive industry is the rapid inclusion of electronics, computers and controls that focus entirely on improved functionality and overall system robustness. This makes the automotive sector

  17. Experiences with Applying STPA to Software-Intensive Systems in the Automotive

    E-Print Network [OSTI]

    Wagner, Stefan

    Experiences with Applying STPA to Software-Intensive Systems in the Automotive Domain Asim in the automotive industries: Adaptive Cruise Control (ACC). The results of the application of STPA to our case can result in accidents. Safety critical-systems are increasingly used in the automotive industry

  18. Domain Controlled Architecture A New Approach for Large Scale Software Integrated Automotive Systems

    E-Print Network [OSTI]

    Kühnhauser, Winfried

    Domain Controlled Architecture A New Approach for Large Scale Software Integrated Automotive Scale Software Integration, LSSI, Automotive Real Time, Multi-core, Many-core, Embedded Automo- tive mobility domain. The automotive in- dustry is confronted with a rising system complexity and several

  19. Real-Time Neutron Radiography - Applications For The Automotive Industry

    E-Print Network [OSTI]

    Richards, Wade J; Tuttle, Michael J; Ulowetz, Kirsten; Mcgee, Robert

    2003-01-01

    Applications For The Automotive Industry Wade J. Richardss radioscopic systems. Automotive Applications Even thoughcomponent capability for automotive applications. Using

  20. W.E.T. Automotive Systems | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJThin FilmUnitedVairexVertVillageVitex SystemsE.T. Automotive Systems

  1. Life cycle cost modeling of automotive paint systems

    E-Print Network [OSTI]

    Leitz, Christopher W. (Christopher William), 1976-

    2007-01-01

    Vehicle coating is an important component of automotive manufacturing. The paint shop constitutes the plurality of initial investment in an automotive assembly plant, consumes the majority of energy used in the plant's ...

  2. Axiomatic design of customizable automotive suspension systems

    E-Print Network [OSTI]

    Deo, Hrishikesh V

    2007-01-01

    The design of existing suspension systems typically involves a compromise solution for the conflicting requirements of comfort and handling. For instance, cars need a soft suspension for better comfort, whereas a stiff ...

  3. Ed Clarke's Impact on Automotive Systems

    E-Print Network [OSTI]

    Clarke, Edmund M.

    System Is it possible that:Is it possible that:Is it possible that:Is it possible that: · Gear = 1 and Speed > 50 mph?Gear = 1 and Speed > 50 mph?Gear = 1 and Speed > 50 mph?Gear = 1 and Speed > 50 mph

  4. A Case Study on the Model-Based Design and Integration of Automotive Cyber-Physical Systems

    E-Print Network [OSTI]

    Koutsoukos, Xenofon D.

    A Case Study on the Model-Based Design and Integration of Automotive Cyber-Physical Systems Di--Cyber-physical systems (CPS), such as automotive systems, are very difficult to design due to the tight interactions of an integrated automotive control system. The system is composed of two independently designed controllers

  5. Transportation Perspectives on Automotive Cyber Physical System: Integrating Hardware-in-the-Loop, Software-in-the-Loop and Human-in-the-Loop Simulations

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    1 Transportation Perspectives on Automotive Cyber Physical System: Integrating Hardware and development environment to evaluate automotive cyber physical system (CPS) as well as its components foundation of the automotive CPS for developing and testing vehicular networking and sensing technologies

  6. Time-Predictable Fault Tolerant Computing for Dependable Automotive Cyber-Physical Systems

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    1 Time-Predictable Fault Tolerant Computing for Dependable Automotive Cyber-Physical Systems Wei University wzhang@vcu.edu Dependable and secure automotive cyber-physical systems (CPSs) are crucial as human and should be bypassed in future computing. This computing platform will be incorporated and evaluated

  7. Concurrent Circuit-Level/System-Level Optimization of a 24 GHz Mixer for Automotive Applications Using a Hybrid

    E-Print Network [OSTI]

    Tentzeris, Manos

    of automotive industry in developing a number of active and passive systems to enhance road safety. A DopplerConcurrent Circuit-Level/System-Level Optimization of a 24 GHz Mixer for Automotive Applications reported so far for this frequency range and in these operating conditions. Index Terms - Automotive radar

  8. Automotive Cyber Physical Systems in the Context of Human Mobility Daniel Work, Alexandre Bayen, and Quinn Jacobson

    E-Print Network [OSTI]

    Automotive Cyber Physical Systems in the Context of Human Mobility Daniel Work, Alexandre Bayen with other technologies. In the larger context of human mobility, the automotive CPS must become more open in the surrounding physical environment. II. FUNDAMENTAL LIMITATIONS OF THE EXISTING AUTOMOTIVE CYBER PHYSICAL SYSTEM

  9. Bio Energy Systems LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental JumpInformation BeaufortBentMichigan:Greece)DaddyInformationSystems LLC Jump

  10. Automotive Component Product Development Enhancement

    E-Print Network [OSTI]

    de Weck, Olivier L.

    Automotive Component Product Development Enhancement Through Multi-Attribute System Design Engineering Systems Division #12;Automotive Component Product Development Enhancement Through Multi of Science in Engineering and Management February 2005 ABSTRACT Automotive industry is facing a tough period

  11. Adaptive control of time delay systems and applications to automotive control problems

    E-Print Network [OSTI]

    Yildiz, Yildiray

    2009-01-01

    This thesis is about the adaptive control of time delay systems with applications to automotive control problems. The stabilization of systems involving time delays is a difficult problem since the existence of a delay may ...

  12. AUSTIN: A tool for Search Based Software Testing for the C Language and its Evaluation on Deployed Automotive Systems

    E-Print Network [OSTI]

    Harman, Mark

    Automotive Systems Kiran Lakhotia King's College London, CREST, Strand, London, WC2R 2LS, U.K. kiran of eight non­trivial, real- world C functions drawn from three embedded automotive software modules' to real industrial code from the automotive industry (see Section V) as well as a number of open source

  13. Why Process-Orientation is Scarce: An Empirical Study of Process-oriented Information Systems in the Automotive Industry

    E-Print Network [OSTI]

    Ulm, Universität

    in the Automotive Industry Bela Mutschler, Johannes Bumiller DaimlerChrysler Research & Technology P.O. Box 2360 the reasons for this drawback, we con- ducted a case study in the automotive domain and a survey among 79 in this context concerns the alignment of information systems (IS) and business processes [6]. In the automotive

  14. Technical Assessment of Organic Liquid Carrier Hydrogen Storage Systems for Automotive Applications

    Fuel Cell Technologies Publication and Product Library (EERE)

    In 2007-2009, the DOE Hydrogen Program conducted a technical assessment of organic liquid carrier based hydrogen storage systems for automotive applications, consistent with the Program’s Multiyear Re

  15. Technical Assessment of Compressed Hydrogen Storage Tank Systems for Automotive Applications

    Fuel Cell Technologies Publication and Product Library (EERE)

    This technical report describes DOE's assessment of the performance and cost of compressed hydrogen storage tank systems for automotive applications. The on-board performance (by Argonne National Lab)

  16. EA-1690: A123 Systems, Inc., Automotive-Class Lithium-Ion Battery...

    Broader source: Energy.gov (indexed) [DOE]

    a Loan and Grant to A123 Systems, Inc., for Vertically Integrated Mass Production of Automotive-Class Lithium-Ion Batteries April 20, 2010 EA-1690: Finding of No Significant Impact...

  17. Enhancing the conceptual design process of automotive exterior systems

    E-Print Network [OSTI]

    Diaz Dominguez, David

    2011-01-01

    Product development cycles in the automotive industry are being reduced and competition is more demanding than ever before. To be successful in this environment, Original Equipment Manufacturers need a product development ...

  18. Automotive electronics business

    E-Print Network [OSTI]

    Hase, Yoshiko, M.B.A. Massachusetts Institute of Technology

    2007-01-01

    In the automotive industry, due to the trend to introduce active safety systems, concerns about protecting the environment, and advances in information technology, key automotive manufacturers are eager to acquire new ...

  19. Position Paper for NSF-NIST-USCAR Workshop on Cyber-Physical Systems Fault Diagnosis and Prognosis in a Network of Embedded Systems in Automotive Vehicles

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    in a Network of Embedded Systems in Automotive Vehicles K. Pattipati1, C. Sankavaram1, B. Wang2, P. Zhang1, Y Identification The relentless competition among automotive companies and increased demands from customers poor vehicle performance increases maintenance costs to customers and warranty costs to automotive

  20. Fault-Tolerance of Embedded Systems with Automotive Applications Ratnesh Kumar, Dept. of Elec. & Comp. Eng., Iowa State Univ. (ISU)

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    Fault-Tolerance of Embedded Systems with Automotive Applications Ratnesh Kumar, Dept. of Elec of operation. New approaches are needed for fault tolerance of safety critical automotive applications. We specs to detect software (component) faults. 2. System (= software + computing-platform + plant) level

  1. CONTROL-ORIENTED MODELING AND ANALYSIS FOR AUTOMOTIVE FUEL CELL SYSTEMS

    E-Print Network [OSTI]

    Peng, Huei

    CONTROL-ORIENTED MODELING AND ANALYSIS FOR AUTOMOTIVE FUEL CELL SYSTEMS Jay T. Pukrushpan Huei Peng of Michigan Ann Arbor, Michigan 48109-2125 Email: pukrushp@umich.edu Abstract Fuel Cells are electrochemical regarded as a potential future stationary and mobile power source. The response of a fuel cell system

  2. Innovative Systems Engineering Solar LLC ISE Solar LLC | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OFAMERICA'SHeavy ElectricalsFTLTechnologySAInformation Systems Engineering

  3. Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for Automotive Applications: 2008 Update

    Fuel Cell Technologies Publication and Product Library (EERE)

    This report estimates fuel cell system cost for systems produced in the years 2006, 2010, and 2015, and is the second annual update of a comprehensive automotive fuel cell cost analysis.

  4. Effect of automotive electrical system changes on fuel consumption using incremental efficiency methodology

    E-Print Network [OSTI]

    Hardin, Christopher William

    2004-01-01

    There has been a continuous increase in automotive electric power usage. Future projections show no sign of it decreasing. Therefore, the automotive industry has a need to either improve the current 12 Volt automotive ...

  5. Biodiesel Systems LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental JumpInformationBio-Gas Technologies, LLC Jump to:BioGasBiocast

  6. Technical Assessment of Organic Liquid Carrier Hydrogen Storage Systems for Automotive Applications

    SciTech Connect (OSTI)

    Ahluwalia, R. K.; Hua, T. Q.; Peng, J. -K; Kromer, M.; Lasher, S.; McKenney, K.; Law, K.; Sinha, J.

    2011-06-21

    In 2007-2009, the DOE Hydrogen Program conducted a technical assessment of organic liquid carrier based hydrogen storage systems for automotive applications, consistent with the Program’s Multiyear Research, Development, and Demonstration Plan. This joint performance (ANL) and cost analysis (TIAX) report summarizes the results of this assessment. These results should be considered only in conjunction with the assumptions used in selecting, evaluating, and costing the systems discussed here and in the Appendices.

  7. TekTrakker Information Systems, LLC-Amart Grad RFI: Addressign...

    Broader source: Energy.gov (indexed) [DOE]

    TekTrakker Information Systems, LLC-Amart Grad RFI: Addressign Policy and Logistical Challenges. Recommendations on how to share and compare failure experience between utilities...

  8. Automotive Engineering Summer Germany 2015

    E-Print Network [OSTI]

    Battaglia, Francine

    Automotive Engineering Summer Germany 2015 Technische Universität Darmstadt Prof. Dr. rer. nat manufactures and automotive suppliers. For example FZD is working on predictive suspension control strategies and advanced driver assistant systems. Therefore the automotive institute owns a plurality of test vehicles

  9. System level modeling of thermoelectric generators for automotive

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergyPlan | Department ofSUPPLEMENTSwitzerland 2012System PlanningSystem for

  10. Development of a Thermoelectric Device for an Automotive Zonal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Thermoelectric Device for an Automotive Zonal HVAC System Development of a Thermoelectric Device for an Automotive Zonal HVAC System Presents development of a thermoelectric device...

  11. A 77 GHz Transceiver for Automotive Radar System Using a120nm In AlAs/In GaAs Metamorphic HEMTs

    E-Print Network [OSTI]

    Kwon, Youngwoo

    A 77 GHz Transceiver for Automotive Radar System Using a120nm 0.4 0.35 In AlAs/In GaAs Metamorphic-mail:ykwon@snu.ac.kr) Abstract -- In this work, we demonstrate a compact 77GHz single-chip transceiver for an automotive radar at the transmitter and a 5dB conversion gain at the receiver. Index Terms -- Automotive radar, 77GHz, MHEMT, MMIC

  12. Knock-free engine control system for turbocharged automotive engine

    SciTech Connect (OSTI)

    Hirabayashi, Y.

    1985-04-09

    In a turbocharged internal combustion engine, in order to optimize engine torque output spark timing control and boost pressure control are coordinated in such a manner that spark advance angle is adjusted only when the measured boost pressure equals a predetermined value and is allowed to vary only within a specified range advanced from a reference value derived from an empirical memory table on the basis of engine speed and boost pressure. When engine operating conditions are such that spark advance angle would fall outside of the specified range, spark advance angle is then held at the empirical value and boost pressure is adjusted in order to optimize engine torque. The coordinated control system can also be designed to respond to exhaust gas temperature on a first-priority basis, i.e., when exhaust temperature is sensed to be dangerously high, boost pressure is reduced regardless of other engine conditions.

  13. A Perspective on Emerging Automotive Safety

    E-Print Network [OSTI]

    Eustice, Ryan

    · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · A Perspective on Emerging Automotive Systems (IVS) team's in- volvement in the recent 2007 DARPA Urban Challenge, wherein our platform, the au- velopment of future automotive safety systems can potentially be accelerated by tackling the technological

  14. Penn State DOE Graduate Automotive Technology Education (Gate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Penn State DOE Graduate Automotive Technology Education (Gate) Program for In-Vehicle, High-Power Energy Storage Systems Penn State DOE Graduate Automotive Technology Education...

  15. Development of a High-Efficiency Zonal Thermoelectric HVAC System for Automotive Applications

    Broader source: Energy.gov [DOE]

    Identify a technical and business approach to accelerate the deployment of light-duty automotive TE HVAC technology, maintain occupant comfort, and improve energy efficiency.

  16. Updating Automotive Research

    E-Print Network [OSTI]

    Sperling, Dan

    2002-01-01

    DANIEL SPERLING Updating Automotive Research Although thewithout vast subsidies. Automotive News, the main auto-relationship between the automotive indus- try and federal

  17. Technical assessment of compressed hydrogen storage tank systems for automotive applications.

    SciTech Connect (OSTI)

    Hua, T. Q.; Ahluwalia, R. K.; Peng, J. K.; Kromer, M.; Lasher, S.; McKenney, K.; Law, K.; Sinha, J.

    2011-02-09

    The performance and cost of compressed hydrogen storage tank systems has been assessed and compared to the U.S. Department of Energy (DOE) 2010, 2015, and ultimate targets for automotive applications. The on-board performance and high-volume manufacturing cost were determined for compressed hydrogen tanks with design pressures of 350 bar ({approx}5000 psi) and 700 bar ({approx}10,000 psi) capable of storing 5.6 kg of usable hydrogen. The off-board performance and cost of delivering compressed hydrogen was determined for hydrogen produced by central steam methane reforming (SMR). The main conclusions of the assessment are that the 350-bar compressed storage system has the potential to meet the 2010 and 2015 targets for system gravimetric capacity but will not likely meet any of the system targets for volumetric capacity or cost, given our base case assumptions. The 700-bar compressed storage system has the potential to meet only the 2010 target for system gravimetric capacity and is not likely to meet any of the system targets for volumetric capacity or cost, despite the fact that its volumetric capacity is much higher than that of the 350-bar system. Both the 350-bar and 700-bar systems come close to meeting the Well-to-Tank (WTT) efficiency target, but fall short by about 5%. These results are summarized.

  18. Technical assessment of cryo-compressed hydrogen storage tank systems for automotive applications.

    SciTech Connect (OSTI)

    Ahluwalia, R.; Hua, T.; Peng, J.-K.; Lasher, S.; McKenney, K.; Sinha, J.; Gardiner, M.; Nuclear Engineering Division; TIAX LLC; U.S. DOE

    2010-05-01

    On-board and off-board performance and cost of cryo-compressed hydrogen storage are assessed and compared to the targets for automotive applications. The on-board performance of the system and high-volume manufacturing cost were determined for liquid hydrogen refueling with a single-flow nozzle and a pump that delivers liquid H{sub 2} to the insulated cryogenic tank capable of being pressurized to 272 atm. The off-board performance and cost of delivering liquid hydrogen were determined for two scenarios in which hydrogen is produced by central steam methane reforming (SMR) or by central electrolysis. The main conclusions are that the cryo-compressed storage system has the potential of meeting the ultimate target for system gravimetric capacity, mid-term target for system volumetric capacity, and the target for hydrogen loss during dormancy under certain conditions of minimum daily driving. However, the high-volume manufacturing cost and the fuel cost for the SMR hydrogen production scenario are, respectively, 2-4 and 1.6-2.4 times the current targets, and the well-to-tank efficiency is well short of the 60% target specified for off-board regenerable materials.

  19. Technology development goals for automotive fuel cell power systems. Final report

    SciTech Connect (OSTI)

    James, B.D.; Baum, G.N.; Kuhn, I.F. Jr. [Directed Technologies, Inc., Arlington, VA (United States)

    1994-08-01

    This report determines cost and performance requirements for Proton Exchange Membrane (PEM) fuel cell vehicles carrying pure H{sub 2} fuel, to achieve parity with internal combustion engine (ICE) vehicles. A conceptual design of a near term FCEV (fuel cell electric vehicle) is presented. Complete power system weight and cost breakdowns are presented for baseline design. Near term FCEV power system weight is 6% higher than ICE system, mid-term FCEV projected weights are 29% lower than ICE`s. There are no inherently high-cost components in FCE, and at automotive production volumes, near term FCEV cost viability is closer at hand than at first thought. PEM current vs voltage performance is presented for leading PEM manufacturers and researchers. 5 current and proposed onboard hydrogen storage techniques are critically compared: pressurized gas, cryogenic liquid, combined pressurized/cryogenic, rechargeable hydride, adsorption. Battery, capacitor, and motor/controller performance is summarized. Fuel cell power system component weight and cost densities (threshold and goal) are tabulated.

  20. Position Paper: Automotive CPS Workshop Oct. 2010 Fault-Tolerant Discrete Control Logic in Automotive Applications

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    in Automotive Applications Richard Hill Department of Mechanical Engineering, University of Detroit Mercy StPosition Paper: Automotive CPS Workshop Oct. 2010 Fault-Tolerant Discrete Control Logic systems, occupant safety systems, etc. As the complexity and coupling of these automotive control systems

  1. Technical assessment of cryo-compressed hydrogen storage tank systems for automotive applications.

    SciTech Connect (OSTI)

    Ahluwalia, R. K.; Hua, T. Q.; Peng, J.-K.; Lasher, S.; McKenney, K.; Sinha, J.; Nuclear Engineering Division; TIAX LLC

    2010-03-03

    On-board and off-board performance and cost of cryo-compressed hydrogen storage has been assessed and compared to the DOE 2010, 2015 and ultimate targets for automotive applications. The Gen-3 prototype system of Lawrence Livermore National Laboratory was modeled to project the performance of a scaled-down 5.6-kg usable hydrogen storage system. The on-board performance of the system and high-volume manufacturing cost were determined for liquid hydrogen refueling with a single-flow nozzle and a pump that delivers 1.5 kg/min of liquid H{sub 2} to the insulated cryogenic tank capable of being pressurized to 272 atm (4000 psi). The off-board performance and cost of delivering liquid hydrogen were determined for two scenarios in which hydrogen is produced by central steam methane reforming (SMR) and by central electrolysis using electricity from renewable sources. The main conclusions from the assessment are that the cryo-compressed storage system has the potential of meeting the ultimate target for system gravimetric capacity and the 2015 target for system volumetric capacity (see Table I). The system compares favorably with targets for durability and operability although additional work is needed to understand failure modes for combined pressure and temperature cycling. The system may meet the targets for hydrogen loss during dormancy under certain conditions of minimum daily driving. The high-volume manufacturing cost is projected to be 2-4 times the current 2010 target of $4/kWh. For the reference conditions considered most applicable, the fuel cost for the SMR hydrogen production and liquid H{sub 2} delivery scenario is 60%-140% higher than the current target of $2-$3/gge while the well-to-tank efficiency is well short of the 60% target specified for off-board regenerable materials.

  2. Sandia Energy - Automotive HCCI Engine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Automotive HCCI Engine Home Transportation Energy Predictive Simulation of Engines Engine Combustion Automotive Automotive HCCI Engine Automotive HCCI EngineAshley...

  3. Maximize LLC effective capacity to reduce system energy! Compressed Caching: Compressing and compacting cache blocks Limits of previous work

    E-Print Network [OSTI]

    Wood, David A.

    Maximize LLC effective capacity to reduce system energy! Compressed Caching: Compressing and compacting cache blocks Limits of previous work: - Limited number of tags - Internal fragmentation - Energy system energy Limited # Tags Internal fragmentation Potentially 3.9X larger LLC VSC-2X achieves only 1.6X

  4. Sources of UHC and CO in Low Temperature Automotive Diesel Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    UHC and CO in Low Temperature Automotive Diesel Combustion Systems Sources of UHC and CO in Low Temperature Automotive Diesel Combustion Systems Presentation given at the 16th...

  5. Agroecology and Sustainable Food Systems, 37:115126, 2013 Copyright Taylor & Francis Group, LLC

    E-Print Network [OSTI]

    Vermont, University of

    policy councils, urban agriculture INTRODUCTION In the last 15 years, movements for just and sustainableAgroecology and Sustainable Food Systems, 37:115­126, 2013 Copyright © Taylor & Francis Group, LLC Agri-Food Movements in the United States: Toward a Sustainable Agri-Food System MARGARITA FERNANDEZ

  6. Thermoelectrics Partnership: Automotive Thermoelectric Modules...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Novel Nanostructured Interface Solution for Automotive Thermoelectric Modules Application Thermoelectrics Partnership: Automotive...

  7. Agroecology and Sustainable Food Systems, 39:318, 2015 Copyright Taylor & Francis Group, LLC

    E-Print Network [OSTI]

    Neher, Deborah A.

    Agroecology and Sustainable Food Systems, 39:3­18, 2015 Copyright © Taylor & Francis Group, LLC Seeds, Pathogen, and Early Blight on Brassicas in Organic Farmer Fields DEBORAH A. NEHER, THOMAS R.S. National Organic Standards (NOS) for compost are suffi- cient to kill plant pathogens and weed seed. Known

  8. 21 2008, 12:00, Idle Gear Rattle in Manual Automotive Transmissions

    E-Print Network [OSTI]

    Psarrakos, Panayiotis

    21 2008, 12:00, , (). Idle Gear Rattle in Manual Automotive Transmissions) phenomena in Automotive Powertrain Systems, dynamic analysis of medical devices and virtual prototype

  9. Secure Embedded Platform for Networked Automotive M. Gomathisankaran

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    Secure Embedded Platform for Networked Automotive Systems M. Gomathisankaran Dept. of Computer University of North Texas 1 Introduction Modern automotive systems contain numerous electronic sensors automotive systems, is a challenge for our generation. Our focus in this position paper is on the security

  10. Essays on Automotive Lending, Gasoline Prices, & Automotive Demand

    E-Print Network [OSTI]

    Schulz-Mahlendorf, Wilko Ziggy

    2013-01-01

    transaction data from a major automotive marketing agency. Iand credit, not gas. ” Automotive News, September 22, 2008.Dieckman, Christian (2008). “Automotive Finance : The Case

  11. Automotive and MHE Fuel Cell System Cost Analysis | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram:Y-12Power, Inc | DepartmentPeer20Insulated CladdingAutomotive and MHE

  12. A Driving Simulator for Teaching Embedded Automotive Control Applications

    E-Print Network [OSTI]

    Gillespie, Brent

    A Driving Simulator for Teaching Embedded Automotive Control Applications Paul G. Griffiths component uses a typical automotive power- train micro-controller and teaches topics in system dynamics students build a fixed-based driving simulator to test advanced automotive control system designs

  13. Materials, Modules, and Systems: An Atoms to Autos Approach to Automotive Thermoelectric Systems Development

    Broader source: Energy.gov [DOE]

    Highlights comprehensive approach tothermoelectric materials, module, and systems development at GM and in collaboration with our R&D partners

  14. In Proceedings of the Automotive Software Workshop on Future Generation Software Architectures in the Automotive Domain, San Diego, CA, Jan. 10-12, 2004.

    E-Print Network [OSTI]

    Garlan, David

    In Proceedings of the Automotive Software Workshop on Future Generation Software Architectures in the Automotive Domain, San Diego, CA, Jan. 10-12, 2004. Two-tiered Architectural Design for Automotive Control two-tiered design methods for automotive control systems at Ford Motor Company. Currently, Ford has

  15. 16th Automotive Research Center Conference16th Automotive Research Center Conference May 10-11, 2010May 10-11, 2010

    E-Print Network [OSTI]

    Papalambros, Panos

    16th Automotive Research Center Conference16th Automotive Research Center Conference May 10-11, 2010May 10-11, 2010 Sponsored by the U.S. Army TARDEC- National Automotive Center 7:30 am Check, Director, National Automotive Center Mr. Sharad Kumar, Senior Director, Systems. Engineering, GDLS Mr

  16. OPTIMIZATION OF AUTOMOTIVE VALVE TRAIN COMPONENTS WITH IMPLICT FILTERING \\Lambda

    E-Print Network [OSTI]

    Filtering, Mechanical Systems, Automotive Valve Trains AMS subject classifications. 65K05, 65K10, 65L05, 65YOPTIMIZATION OF AUTOMOTIVE VALVE TRAIN COMPONENTS WITH IMPLICT FILTERING \\Lambda T. D. CHOI y , O identification and optimization in automotive valve train design. We extend our previous work by using a more

  17. High Assurance Aerospace CPS & Implications for the Automotive Industry

    E-Print Network [OSTI]

    Poovendran, Radha

    High Assurance Aerospace CPS & Implications for the Automotive Industry Scott A. Lintelman1 assurance CPS can mutually benefit aerospace and automotive industries. I. INTRODUCTION Commercial aviation]. In the automotive industry, recent trends in intelligent transportation systems can be evidently mapped to e

  18. Automatic Parallelization of Hand Written Automotive Engine Control

    E-Print Network [OSTI]

    Kasahara, Hironori

    Automatic Parallelization of Hand Written Automotive Engine Control Codes Using OSCAR Compiler Dan approach to realize the next- generation automobiles integrated control system. However, automotive-core processors for a long time. This paper proposes to parallelize an automotive engine crankshaft control

  19. The Marginalized Particle Filter for Automotive Tracking Applications

    E-Print Network [OSTI]

    Gustafsson, Fredrik

    1 The Marginalized Particle Filter for Automotive Tracking Applications Andreas Eidehall Thomas Sch surroundings (lane geometry and the position of other vehicles), which is needed for intelligent automotive in a nonlinear estimation problem. For automotive tracking systems, these problems are traditionally handled

  20. Predictable Messaging in Wireless Automotive CPS Hongwei Zhang

    E-Print Network [OSTI]

    Zhang, Hongwei

    Predictable Messaging in Wireless Automotive CPS Hongwei Zhang Department of Computer Science to predictable, dependable messaging in mission-critical wireless automotive cyber-physical systems (CPS), then we explore research directions for addressing these challenges. 1 Wireless automotive CPS: vision

  1. The Marginalized Particle Filter for Automotive Tracking Applications

    E-Print Network [OSTI]

    Schön, Thomas

    The Marginalized Particle Filter for Automotive Tracking Applications Andreas Eidehall Thomas B surroundings (lane geometry and the position of other vehicles), which is needed for intelligent automotive in a nonlinear estimation problem. For automotive tracking systems, these problems are traditionally handled

  2. AZ Automotive: Presentation

    Broader source: Energy.gov [DOE]

    The role of midsize automotive module suppliers in meeting the goals of the Energy Independence and Security act of 2007

  3. Workplace Charging Challenge Partner: Bosch Automotive Service...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bosch Automotive Service Solutions, Inc. Workplace Charging Challenge Partner: Bosch Automotive Service Solutions, Inc. Workplace Charging Challenge Partner: Bosch Automotive...

  4. Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for Automotive Applications: 2009 Update

    Fuel Cell Technologies Publication and Product Library (EERE)

    This report is the third annual update of a comprehensive automotive fuel cell cost analysis. It contains estimates for material and manufacturing cost of complete 80 kWnet direct hydrogen proton exch

  5. Automotive component product development enhancement through multi-attribute system design optimization in an integrated concurrent engineering framework

    E-Print Network [OSTI]

    Usan, Massimo, 1967-

    2005-01-01

    Automotive industry is facing a tough period. Production overcapacity and high fixed costs constrain companies' profits and challenge the very same existence of some corporations. Strangulated by the reduced cash availability ...

  6. What matters most : researching the critical factors for maximizing automotive innovation profitability, and their implications of systems-based innovations

    E-Print Network [OSTI]

    Clark, Nathan A. (Nathan Allen), 1972-

    2004-01-01

    It is predicted by many in the industry that over the next decade automotive OEM's will look more and more like "vehicle-brand owners," focusing efforts on branding, marketing, and building a stronger retail channel. This ...

  7. Bright Automotive Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar Energy LLC JumpBiossence JumpJerseyEconomyBridger Valley Elec Assn,Automotive

  8. A comprehensive approach to complex system product development : operations management tools applied to automotive design

    E-Print Network [OSTI]

    Noor, Muhammad Jehanzeb, 1982-

    2007-01-01

    The research is based on observations made over a two-year period with the Closures Systems Integrators or CSIs (supervisory engineers who coordinate attribute balance and system decisions for conflicting door attributes) ...

  9. Technology Roadmap for Energy Reduction in Automotive Manufacturing

    SciTech Connect (OSTI)

    none,

    2008-09-01

    U.S. Department of Energy’s (DOE) Industrial Technologies Program (ITP), in collaboration with the United States Council for Automotive Research LLC (USCAR), hosted a technology roadmap workshop in Troy, Michigan in May 2008. The purpose of the workshop was to explore opportunities for energy reduction, discuss the challenges and barriers that might need to be overcome, and identify priorities for future R&D. The results of the workshop are presented in this report.

  10. Slurry-Based Chemical Hydrogen Storage Systems for Automotive Fuel Cell Applications

    SciTech Connect (OSTI)

    Brooks, Kriston P.; Semelsberger, Troy; Simmons, Kevin L.; Van Hassel, Bart A.

    2014-05-30

    In this paper, the system designs for hydrogen storage using chemical hydrogen materials in an 80 kWe fuel cell, light-duty vehicle are described. Ammonia borane and alane are used for these designs to represent the general classes of exothermic and endothermic materials. The designs are then compared to the USDRIVE/DOE developed set of system level targets for on-board storage. While most of the DOE targets are predicted to be achieved based on the modeling, the system gravimetric and volumetric densities were more challenging and became the focus of this work. The resulting system evaluation determined that the slurry is majority of the system mass. Only modest reductions in the system mass can be expected with improvements in the balance of plant components. Most of the gravimetric improvements will require developing materials with higher inherent storage capacity or by increasing the solids loading of the chemical hydrogen storage material in the slurry.

  11. New Automotive Air Conditioning System Simulation Tool Developed in MATLAB/Simulink

    SciTech Connect (OSTI)

    Kiss, T.; Chaney, L.; Meyer, J.

    2013-07-01

    Further improvements in vehicle fuel efficiency require accurate evaluation of the vehicle's transient total power requirement. When operated, the air conditioning (A/C) system is the largest auxiliary load on a vehicle; therefore, accurate evaluation of the load it places on the vehicle's engine and/or energy storage system is especially important. Vehicle simulation software, such as 'Autonomie,' has been used by OEMs to evaluate vehicles' energy performance. A transient A/C simulation tool incorporated into vehicle simulation models would also provide a tool for developing more efficient A/C systems through a thorough consideration of the transient A/C system performance. The dynamic system simulation software Matlab/Simulink was used to develop new and more efficient vehicle energy system controls. The various modeling methods used for the new simulation tool are described in detail. Comparison with measured data is provided to demonstrate the validity of the model.

  12. Automotive Engineering Summer Germany (AESG)

    E-Print Network [OSTI]

    Battaglia, Francine

    Automotive Engineering Summer Germany (AESG) #12;2 Automotive Engineering Summer Germany #12 of May 3 automotive classes will be offered (12 ECTS in total) credits can be transferred to UB / VT of May 3 automotive classes will be offered (12 ECTS in total) no knowledge of the German language

  13. Technical Assessment of Cryo-Compressed Hydrogen Storage Tank Systems for Automotive Applications

    Fuel Cell Technologies Publication and Product Library (EERE)

    Technical report describing DOE's second assessment report on a third generation (Gen3) system capable of storing hydrogen at cryogenic temperatures within a pressure vessel on-board a vehicle. The re

  14. Technical Assessment of Cryo-Compressed Hydrogen Storage Tank Systems for Automotive Applications

    SciTech Connect (OSTI)

    Ahluwalia, Rajesh; Hua, T. Q.; Peng, J. -K.; Lasher, S.; McKenney, Kurtis; Sinha, J.

    2009-12-01

    Technical report describing DOE's second assessment report on a third generation (Gen3) system capable of storing hydrogen at cryogenic temperatures within a pressure vessel on-board a vehicle. The report includes an overview of technical progress to date, including the potential to meet DOE onboard storage targets, as well as independent reviews of system cost and energy analyses of the technology paired with delivery costs.

  15. Advanced High Energy and High Power Battery Systems for Automotive Applications Khalil Amine

    E-Print Network [OSTI]

    Levi, Anthony F. J.

    to be adopted in P-HEVs and EVs. In this talk, we report several high-energy system s that offer the potential #12;2 2005 Global Human2005 Global Human--Activity Energy FlowsActivity Energy Flows Hydro 10 Geothermal 2.5 Wind 0.22 Solar 0.02 Coal 110 Natural Gas 107 Residential 50 Vehicle 39 Freight 40 Air 12

  16. Minimizing Response Times of Automotive Dataflows on Multicore Glenn A. Elliott

    E-Print Network [OSTI]

    Anderson, James

    Minimizing Response Times of Automotive Dataflows on Multicore Glenn A. Elliott , Namhoon Kim software architectures are prevalent in prototypes of advanced automotive systems, for both driver-processing components in prototypes of ad- vanced automotive systems, for both driver-assisted and au- tonomous driving

  17. Verification of automotive networks -what to expect (and not expect) from each

    E-Print Network [OSTI]

    Navet, Nicolas

    Verification of automotive networks - what to expect (and not expect) from each technique Nicolas NAVET ­ nicolas.navet@uni.lu "Automotive Bus systems + Ethernet" Stuttgart, Germany, December 9-11, 2013. December 09, 2013 #12;1 Outline - 212/11/2013Automotive Bus systems + Ethernet Early-stage timing

  18. Engineering and Materials for Automotive Thermoelectric Applications...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Materials for Automotive Thermoelectric Applications Engineering and Materials for Automotive Thermoelectric Applications Design and optimization of TE exhaust generator,...

  19. Skutterudite Thermoelectric Generator For Automotive Waste Heat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Skutterudite Thermoelectric Generator For Automotive Waste Heat Recovery Skutterudite Thermoelectric Generator For Automotive Waste Heat Recovery Skutterudite TE modules were...

  20. Novel Nanostructured Interface Solution for Automotive Thermoelectric...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nanostructured Interface Solution for Automotive Thermoelectric Modules Application Novel Nanostructured Interface Solution for Automotive Thermoelectric Modules Application...

  1. Towards Computational Resources-Aware Control Solutions for Automotive CPS

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    Towards Computational Resources-Aware Control Solutions for Automotive CPS Jonathan Sprinkle and Ricardo G. Sanfelice University of Arizona Abstract Automotive cyber-physical systems will need to address platforms, component based design, dynamic adaptation, and modeling languages and conventions. 2 Current

  2. REQUIREMENTS FOR THE WORKFLOW-BASED SUPPORT OF RELEASE MANAGEMENT PROCESSES IN THE AUTOMOTIVE SECTOR

    E-Print Network [OSTI]

    Ulm, Universität

    the automotive industry currently has to master is the complexity of the electrical/electronic system of a carREQUIREMENTS FOR THE WORKFLOW-BASED SUPPORT OF RELEASE MANAGEMENT PROCESSES IN THE AUTOMOTIVE role since its quality is correlated with the resulting product quality. Therefore the automotive

  3. Virtual Prototyping Examples for Automotive Industries Fan Dai, Wolfgang Felger, Thomas Fruhauf,

    E-Print Network [OSTI]

    Zachmann, Gabriel

    Virtual Prototyping Examples for Automotive Industries Fan Dai, Wolfgang Felger, Thomas Fr­ ical prototypes. In the automotive industries, CAD and CAE systems are widely used. This provides a good basis for virtual prototyping. This vision is therefore extremely interesting for automotive in

  4. NETCARBENCH: A BENCHMARK FOR TECHNIQUES AND TOOLS USED IN THE DESIGN OF AUTOMOTIVE

    E-Print Network [OSTI]

    Navet, Nicolas

    NETCARBENCH: A BENCHMARK FOR TECHNIQUES AND TOOLS USED IN THE DESIGN OF AUTOMOTIVE COMMUNICATION and configuration of automotive communication systems. For instance, typical objectives are the minimization (Navet et al., 2005). The strong cost pressure in the automotive industry re- quires the hardware

  5. Signal-based Automotive Communication Security and Its Interplay with Safety Requirements

    E-Print Network [OSTI]

    Ning, Peng

    Signal-based Automotive Communication Security and Its Interplay with Safety Requirements Benjamin--Recently, demonstrated attacks on automotive com- munication systems have made security a necessary requirement mechanisms for highly constrained automotive (internal) network environments, such as for example the CAN bus

  6. HW Componentizing Kernel: A New Approach to address the Mega Complexity of Future Automotive CPS

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    HW Componentizing Kernel: A New Approach to address the Mega Complexity of Future Automotive CPS of CPS (Cyber Physical System). However, current software development process in the automotive industry automotive software devel- opment process in the perspective of CPS and proposes a new kernel-based approach

  7. Consequences of Modular Controller Development for Automotive Powertrains: A Case Study

    E-Print Network [OSTI]

    Stefanopoulou, Anna

    Consequences of Modular Controller Development for Automotive Powertrains: A Case Study A. G structure for automotive power- trains has certain bene ts. These include improved pro- ductivity through- dently. Due to the fact that the automotive powertrain system contains many highly interactive sub

  8. A Unified Approach for Active Safety in Automotive Cyber Physical Annalisa Scacchioli

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    A Unified Approach for Active Safety in Automotive Cyber Physical Systems Annalisa Scacchioli Abstract-- This position paper discusses limitations of the current automotive transportation active safety of safety remains one of the most serious challenges in automotive transportation at a global scale

  9. Exploiting Real-Time FPGA Based Adaptive Systems Technology for Real-Time Sensor Fusion in Next Generation Automotive Safety Systems

    E-Print Network [OSTI]

    Chappell, Steve; Preston, Dan; Olmstead, Dave; Flint, Bob; Sullivan, Chris

    2011-01-01

    We present a system for the boresighting of sensors using inertial measurement devices as the basis for developing a range of dynamic real-time sensor fusion applications. The proof of concept utilizes a COTS FPGA platform for sensor fusion and real-time correction of a misaligned video sensor. We exploit a custom-designed 32-bit soft processor core and C-based design & synthesis for rapid, platform-neutral development. Kalman filter and sensor fusion techniques established in advanced aviation systems are applied to automotive vehicles with results exceeding typical industry requirements for sensor alignment. Results of the static and the dynamic tests demonstrate that using inexpensive accelerometers mounted on (or during assembly of) a sensor and an Inertial Measurement Unit (IMU) fixed to a vehicle can be used to compute the misalignment of the sensor to the IMU and thus vehicle. In some cases the model predications and test results exceeded the requirements by an order of magnitude with a 3-sigma or ...

  10. Automotive Spray Paint Simulation Jonathan Konieczny1,

    E-Print Network [OSTI]

    Meyer, Gary

    Automotive Spray Paint Simulation Jonathan Konieczny1, , John Heckman2 , Gary Meyer1 , Mark Manyen2 for the simulation of spray painting. Head mounted display goggles are combined with a tracking system to allow users to paint a virtual surface with a spray gun. Ray tracing is used to simulate droplets landing

  11. Computer-Aided Optimization of dc/dc Converters for Automotive Applications Timothy C. Neugebauer David J. Perreault

    E-Print Network [OSTI]

    Perreault, Dave

    Computer-Aided Optimization of dc/dc Converters for Automotive Applications Timothy C. Neugebauer/dc converters, with a focus on converters for dual-voltage automotive electrical systems. A new CAD optimization is the next evolutionary step for automotive electrical systems. High-power loads will be moved to a new high

  12. DOE Zero Energy Ready Home Case Study: 2013 Weiss Building & Development, LLC., System Home, River Forest, IL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department8, 2015 GATEWAY Takes 9.New Town BuildersHealthyNearLLC System

  13. Green automotive supply chain for an emerging market

    E-Print Network [OSTI]

    Fisch, Gene (Gene Joseph)

    2008-01-01

    Green Supply Chain Management (GSCM) within the automotive industry is largely based on combining lean manufacturing with mandated supplier adoption of ISO 14001-compliant Environmental Management Systems (EMS). This ...

  14. Battery Lifetime-Aware Automotive Climate Control for Electric Vehicles

    E-Print Network [OSTI]

    Al Faruque, Mohammad Abdullah

    Battery Lifetime-Aware Automotive Climate Control for Electric Vehicles Korosh Vatanparvar) optimization involves stringent con- straints on driving range and battery lifetime. Sophisticated embedded systems and huge number of computing resources have enabled re- searchers to implement advanced Battery

  15. Meeting the Embedded Design Needs of Automotive Applications

    E-Print Network [OSTI]

    Lyons, Wayne

    2011-01-01

    The importance of embedded systems in driving innovation in automotive applications continues to grow. Understanding the specific needs of developers targeting this market is also helping to drive innovation in RISC core design. This paper describes how a RISC instruction set architecture has evolved to better meet those needs, and the key implementation features in two very different RISC cores are used to demonstrate the challenges of designing for real-time automotive systems.

  16. Thermoelectrics Partnership: Automotive Thermoelectric Modules...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ace067goodson2011o.pdf More Documents & Publications Thermoelectrics Partnership: Automotive Thermoelectric Modules with Scalable Thermo- and Electro-Mechanical Interfaces Novel...

  17. Technology Roadmap Analysis 2013: Assessing Automotive Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Roadmap Analysis 2013: Assessing Automotive Technology R&D Relevant to DOE Power Electronics Cost Targets Technology Roadmap Analysis 2013: Assessing Automotive...

  18. Development of Thermoelectric Technology for Automotive Waste...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Thermoelectric Technology for Automotive Waste Heat Recovery Development of Thermoelectric Technology for Automotive Waste Heat Recovery Overview and status of project to develop...

  19. Thermoelectric Technology for Automotive Waste Heat Recovery...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology for Automotive Waste Heat Recovery Thermoelectric Technology for Automotive Waste Heat Recovery Presentation given at the 2007 Diesel Engine-Efficiency & Emissions...

  20. Innovative Drivetrains in Electric Automotive Technology Education...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Drivetrains in Electric Automotive Technology Education (IDEATE) Innovative Drivetrains in Electric Automotive Technology Education (IDEATE) 2012 DOE Hydrogen and Fuel Cells...

  1. Thermoelectric Generator Development for Automotive Waste Heat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Automotive Waste Heat Recovery Thermoelectric Generator Development for Automotive Waste Heat Recovery Presentation given at the 16th Directions in Engine-Efficiency and...

  2. Automotive Thermoelectric Generators and HVAC | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Generators and HVAC Automotive Thermoelectric Generators and HVAC Provides overview of DOE-supported projects in automotive thermoelectric generators and heatersair conditioners...

  3. Development of Thermoelectric Technology for Automotive Waste...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Thermoelectric Materials and Generator Technology for Automotive Waste Heat at GM Advanced Thermoelectric Materials and Generator Technology for Automotive Waste Heat at...

  4. AUTOMOTIVE INDUSTRY ANALYSIS Submitted by Team A

    E-Print Network [OSTI]

    AUTOMOTIVE INDUSTRY ANALYSIS Submitted by Team A Donald Bradley Morgan Bruns Adam Fleming Jay Ling on the automotive industry, specifically, large-scale manufacturers of automobiles. The automotive industry of the automotive industry. This is followed by an analysis of the industry's structural characteristics using

  5. Automotive EMC Workshop Clemson Vehicular Electronics Laboratory

    E-Print Network [OSTI]

    Stuart, Steven J.

    Automotive EMC Workshop Clemson Vehicular Electronics Laboratory Reliable Automotive Electronics/O · Adequate Decoupling · Balance Control 2 In 2011, CVEL began to guarantee that the automotive products they reviewed/designed would meet all automotive EMC requirements the first time they were tested. #12;Clemson

  6. Automotive Turbocharging: Industrial Requirements and Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Turbocharging: Industrial Requirements and Technology Developments Automotive Turbocharging: Industrial Requirements and Technology Developments Significant improvements in...

  7. Real-Time Neutron Radiography - Applications For The Automotive Industry

    E-Print Network [OSTI]

    Richards, Wade J; Tuttle, Michael J; Ulowetz, Kirsten; Mcgee, Robert

    2003-01-01

    Applications For The Automotive Industry Wade J. Richardstechniques for the automotive industry is not new 5 . Theused to assist the automotive industry in new and creative

  8. Energy and Environmental Challenges for the Japanese Automotive Industry

    E-Print Network [OSTI]

    Sperling, Daniel

    2000-01-01

    for the Japanese Automotive Industry UCD-ITS-RR-00-05 Danieland uncertainty for the automotive industry. The industryissues facing the automotive industry are regulation of

  9. Fact #570: May 11, 2009 Automotive Manufacturing Employment Declining...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0: May 11, 2009 Automotive Manufacturing Employment Declining Fact 570: May 11, 2009 Automotive Manufacturing Employment Declining The number of people employed by automotive...

  10. Platform Based Design for Automotive Sensor Conditioning

    E-Print Network [OSTI]

    Fanucci, L; Iozzi, F; Marino, C; Rocchi, A

    2011-01-01

    In this paper a general architecture suitable to interface several kinds of sensors for automotive applications is presented. A platform based design approach is pursued to improve system performance while minimizing time-to-market.. The platform is composed by an analog front-end and a digital section. The latter is based on a microcontroller core (8051 IP by Oregano) plus a set of dedicated hardware dedicated to the complex signal processing required for sensor conditioning. The microcontroller handles also the communication with external devices (as a PC) for data output and fast prototyping. A case study is presented concerning the conditioning of a Gyro yaw rate sensor for automotive applications. Measured performance results outperform current state-of-the-art commercial devices.

  11. Automotive Stirling Engine Mod I design review report. Volume III

    SciTech Connect (OSTI)

    Not Available

    1982-08-01

    This volume, No. 3, of the Automotive Stirling Engine Mod 1 Design Review Report contains a preliminary parts list and detailed drawings of equipment for the basic Stirling engine and for the following systems: vehicular Stirling Engine System; external heat system; hot and cold engine systems; engine drive; controls and auxiliaries; and vehicle integration. (LCL)

  12. Automotive Power Generation and Control

    E-Print Network [OSTI]

    Caliskan, Vahe

    This paper describes some new developments in the application of power electronics to automotive power generation and control. A new load-matching technique is introduced that uses a simple switched-mode rectifier to achieve ...

  13. Ceramic Automotive Stirling Engine Program

    SciTech Connect (OSTI)

    Not Available

    1986-08-01

    The Ceramic Automotive Stirling Engine Program evaluated the application of advanced ceramic materials to an automotive Stirling engine. The objective of the program was to evaluate the technical feasibility of utilizing advanced ceramics to increase peak engine operating temperature, and to evaluate the performance benefits of such an increase. Manufacturing cost estimates were also developed for various ceramic engine components and compared with conventional metallic engine component costs.

  14. NSF/DOE Thermoelectrics Partnership: Thermoelectrics for Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Thermoelectrics for Automotive Waste Heat Recovery NSFDOE Thermoelectrics Partnership: Thermoelectrics for Automotive Waste Heat Recovery Development for commercialization of...

  15. NSF/DOE Thermoelectics Partnership: Thermoelectrics for Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Thermoelectics Partnership: Thermoelectrics for Automotive Waste Heat Recovery NSFDOE Thermoelectics Partnership: Thermoelectrics for Automotive Waste Heat Recovery 2011 DOE...

  16. Future Automotive Aftertreatment Solutions: The 150 C Challenge

    E-Print Network [OSTI]

    Page 1 Future Automotive Aftertreatment Solutions: The 150° C Challenge Workshop Report ACEC Low, the U.S. automotive manufacturer

  17. Advanced Automotive Technologies annual report to Congress, fiscal year 1996

    SciTech Connect (OSTI)

    1998-03-01

    This annual report serves to inform the United States Congress on the progress for fiscal year 1996 of programs under the Department of Energy`s Office of Advanced Automotive Technologies (OAAT). This document complies with the legislative requirement to report on the implementation of Title III of the Automotive Propulsion Research and Development Act of 1978. Also reported are related activities performed under subsequent relevant legislation without specific reporting requirements. Furthermore, this report serves as a vital means of communication from the Department to all public and private sector participants. Specific requirements that are addressed in this report are: Discussion of how each research and development contract, grant, or project funded under the authority of this Act satisfies the requirements of each subsection; Current comprehensive program definition for implementing Title III; Evaluation of the state of automotive propulsion system research and development in the United States; Number and amount of contracts and grants awarded under Title III; Analysis of the progress made in developing advanced automotive propulsion system technology; and Suggestions for improvements in automotive propulsion system research and development, including recommendations for legislation.

  18. Occupant Protection and Rescue using Automotive Cyber-Physical Costin D. Untaroiu*

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    Occupant Protection and Rescue using Automotive Cyber-Physical Systems Costin D. Untaroiu* , Jeff R. Crandall Center for Applied Biomechanics, Department of Mechanical and Aerospace Engineering, University) Background: The current trend in the automotive industry is the expanded use of embedded electronics

  19. Automotive Fuel Cell Corporation SNL researcher Cy Fujimoto demonstrates his new

    E-Print Network [OSTI]

    Automotive Fuel Cell Corporation n SNL researcher Cy Fujimoto demonstrates his new flexible cell vehicle, the systems are complex and costly. For example, fuel cell vehicles run optimally when), researcher Cy Fujimoto, in partnership with Automotive Fuel Cell Cooperation (AFCC), is developing a polymer

  20. 5 kW Multilevel DC-DC Converter for Hybrid Electric and Fuel Cell Automotive

    E-Print Network [OSTI]

    Tolbert, Leon M.

    5 kW Multilevel DC-DC Converter for Hybrid Electric and Fuel Cell Automotive Applications Faisal H) for future hybrid electric vehicle and fuel cell automotive applications will be presented in this paper will impact if the 42V/14V dual bus system will be a successful and cost effective solution for future

  1. I N S T I T U T F U R I N F O R M A T I K Automotive Architecture Framework

    E-Print Network [OSTI]

    Broy, Manfred

    T U M I N S T I T U T F ¨U R I N F O R M A T I K Automotive Architecture Framework: Towards Automotive Architecture Framework: Towards a Holistic and Standardised System Architecture Description architecture development for the automotive industry. It outlines best practices and methods and introduces

  2. Independent Oversight Review, Nevada Site Office and National Security Technologies, LLC- November 2011

    Broader source: Energy.gov [DOE]

    Review of Nevada Site Office and National Security Technologies, LLC, Line Oversight and Contractor Assurance Systems Self-Assessment

  3. Integrated automotive exhaust engineering : uncertainty management

    E-Print Network [OSTI]

    Fang, Xitian, 1963-

    2006-01-01

    The global automotive industry has entered a stagnating period. Automotive OEMs and their tier suppliers are struggling for business growth. One of the most important strategies is to improve the engineering efficiency in ...

  4. Migrating Automotive Product Lines: a Case Study

    E-Print Network [OSTI]

    Cordy, James R.

    . Software Product Lines (SPL) are widely used to manage variability in the automotive industry. In a rapidly study from an automotive domain, that it is tractable to lift industrial-grade transforma- tionsMigrating Automotive Product Lines: a Case Study Michalis Famelis1 , Levi L´ucio2 , Gehan Selim3

  5. Automotive Engineering BEng (Hons) Key details

    E-Print Network [OSTI]

    Painter, Kevin

    Automotive Engineering BEng (Hons) Key details Duration: Full-time: 3 years (BEng) / 4 years (BEng programme, but allows students in the later years to specialise in subjects relating to automotive technology. Automotive engineering continues to be a major employer of professional engineers, owing

  6. CFD-based Optimization for Automotive Aerodynamics

    E-Print Network [OSTI]

    Dumas, Laurent

    Chapter 1 CFD-based Optimization for Automotive Aerodynamics Laurent Dumas Abstract The car drag- ments. An overview of the main characteristics of automotive aerodynamics and a detailed presentation.dumas@upmc.fr) 1 #12;2 Laurent Dumas 1.1 Introducing Automotive Aerodynamics 1.1.1 A Major Concern for Car

  7. MIT and Automotive Industries MIT Industry Brief

    E-Print Network [OSTI]

    Herr, Hugh

    MIT and Automotive Industries MIT Industry Brief MIT's Industrial Liaison Program (ILP) can bring@ilp.mit.edu, or visit http://ilp.mit.edu. MIT and Automotive Industries The Massachusetts Institute of Technology (MIT) is a leading center of research and education on topics important to the automotive industry and its suppliers

  8. Cardiogram: Visual Analytics for Automotive Engineers

    E-Print Network [OSTI]

    Cardiogram: Visual Analytics for Automotive Engineers Michael Sedlmair1, Petra Isenberg2, Dominikus that sup- ports automotive engineers in debugging masses of traces each consisting of millions of recorded-critical networks to be error-free has become a major task and challenge for automotive engi- neers. To overcome

  9. NONLINEAR MAGNETIC LEVITATION OF AUTOMOTIVE ENGINE VALVES

    E-Print Network [OSTI]

    Grizzle, Jessy W.

    NONLINEAR MAGNETIC LEVITATION OF AUTOMOTIVE ENGINE VALVES K. Peterson, J.W. Grizzle, and A, the controller is designed for and implemented on an electromagnetic valve actuator for use in automotive engines on an electromagnetic valve actuator for use in the actuation of automotive engine valves. 2. ELECTROMAGNETIC VALVE

  10. NONLINEAR MAGNETIC LEVITATION OF AUTOMOTIVE ENGINE VALVES

    E-Print Network [OSTI]

    Stefanopoulou, Anna

    NONLINEAR MAGNETIC LEVITATION OF AUTOMOTIVE ENGINE VALVES K. Peterson, J.W. Grizzle, and A, the controller is designed for and implemented on an electromagnetic valve actuator for use in automotive engines on an elec- tromagnetic valve actuator, designed for use in the actuation of automotive engine valves. 2

  11. Technical Assessment of Compressed Hydrogen Storage Tank Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Compressed Hydrogen Storage Tank Systems for Automotive Applications Technical Assessment of Compressed Hydrogen Storage Tank Systems for Automotive Applications Technical report...

  12. Development of a High-Efficiency Zonal Thermoelectric HVAC System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a High-Efficiency Zonal Thermoelectric HVAC System for Automotive Applications Development of a High-Efficiency Zonal Thermoelectric HVAC System for Automotive Applications...

  13. formula society of automotive engineers

    E-Print Network [OSTI]

    Stormo, Gary

    formula society of automotive engineers >> wuracing.com #12;The 2013 season presents a huge and promising time for WUracing. Thank you, Surjan Singh President, Formula SAE, WUracing message to sponsors University comprises a group of enthusiastic students who completely design and fabricate a formula race car

  14. Upgrading the Center for Lightweighting Automotive Materials and Processing - a GATE Center of Excellence at the University of Michigan-Dearborn

    SciTech Connect (OSTI)

    Mallick, P. K.

    2012-08-30

    The Center for Lightweighting Materials and Processing (CLAMP) was established in September 1998 with a grant from the Department of Energy’s Graduate Automotive Technology Education (GATE) program. The center received the second round of GATE grant in 2005 under the title “Upgrading the Center for Lightweighting Automotive Materials and Processing”. Using the two grants, the Center has successfully created 10 graduate level courses on lightweight automotive materials, integrated them into master’s and PhD programs in Automotive Systems Engineering, and offered them regularly to the graduate students in the program. In addition, the Center has created a web-based lightweight automotive materials database, conducted research on lightweight automotive materials and organized seminars/symposia on lightweight automotive materials for both academia and industry. The faculty involved with the Center has conducted research on a variety of topics related to design, testing, characterization and processing of lightweight materials for automotive applications and have received numerous research grants from automotive companies and government agencies to support their research. The materials considered included advanced steels, light alloys (aluminum, magnesium and titanium) and fiber reinforced polymer composites. In some of these research projects, CLAMP faculty have collaborated with industry partners and students have used the research facilities at industry locations. The specific objectives of the project during the current funding period (2005 – 2012) were as follows: (1) develop new graduate courses and incorporate them in the automotive systems engineering curriculum (2) improve and update two existing courses on automotive materials and processing (3) upgrade the laboratory facilities used by graduate students to conduct research (4) expand the Lightweight Automotive Materials Database to include additional materials, design case studies and make it more accessible to outside users (5) provide support to graduate students for conducting research on lightweight automotive materials and structures (6) provide industry/university interaction through a graduate certificate program on automotive materials and technology idea exchange through focused seminars and symposia on automotive materials.

  15. Digital Styling for Designers: in Prospective Automotive Design

    E-Print Network [OSTI]

    Toronto, University of

    design studios are introducing a high resolution large-display H/W, so called a power wallDigital Styling for Designers: in Prospective Automotive Design Seok-Hyung Bae and Ryugo Kijima) the digital design sketch, (b) real-size spline curve modification system, and (c) direct 3D shape creation

  16. Computer-aided optimization of DC/DC converters for automotive applications

    E-Print Network [OSTI]

    Neugebauer, Timothy C.

    This paper investigates computer-aided optimization of DC/DC converters, with a focus on converters for dual-voltage automotive electrical systems. A new CAD optimization approach based on Monte Carlo search methods is ...

  17. An automotive engine model for air-fuel ratio control using cylinder pressure information 

    E-Print Network [OSTI]

    Nana, Emmanuel Tomdio

    1997-01-01

    Increasingly strict emission standards require very accurate and fast air-fuel ratio (AFR) control in combustion engines. This thesis addresses the design methodology currently used for synthesizing a control system for an automotive internal...

  18. NSF/DOE Thermoelectrics Partnership: Thermoelectrics for Automotive Waste Heat Recovery

    Broader source: Energy.gov [DOE]

    Development for commercialization of automotive thermoelectric generators from high-ZT TE materials with using low-cost, widely available materials, system design and modeling to maximize temperature differential across TE modules and maximize power output

  19. Time and event triggered communication scheduling for automotive applications

    E-Print Network [OSTI]

    Johansson, Roger

    Time and event triggered communication scheduling for automotive applications ROGER JOHANSSON and event triggered communication scheduling for automotive applications 1 ROGER JOHANSSON Department triggered communication scheduling for automotive applications ROGER JOHANSSON © ROGER JOHANSSON, 2004

  20. Multidisciplinary design optimization of an automotive magnetorheological brake design

    E-Print Network [OSTI]

    Park, Edward

    Multidisciplinary design optimization of an automotive magnetorheological brake design Edward J to the elec- tromagnet. Key issues involved in the initial design of the automotive MR brake are presented: Magnetorheological fluid; Automotive brake; Finite element analysis; Computational fluid dynamics; Multidisciplinary

  1. Alamos National Security, LLC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    30 nonprofit organizations to receive monetary donations from Los Alamos National Security, LLC June 25, 2012 Recognizing employee and retiree volunteer efforts LOS ALAMOS, NEW...

  2. Center for Lightweighting Automotive Materials and Processing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2007 Project Title Sponsor Development of Thermoplastic Matrix Composites using Resin Infusion CLAMP Fatigue of Automotive Thermoplastics CLAMP Development of Crush-Resistant...

  3. Center for Lightweighting Automotive Materials and Processing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    D.C. ti06mallick.pdf More Documents & Publications Center for Lightweighting Automotive Materials and Processing 2008 Annual Merit Review Results Summary - 16. Technology...

  4. Center for Lightweighting Automotive Materials and Processing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ti010mallick2011o.pdf More Documents & Publications Center for Lightweighting Automotive Materials and Processing GATE Center of Excellence in Lightweight Materials and...

  5. Electrifying the Automotive Market | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electrifying the Automotive Market Argonne is developing battery technology that extends the range for electric vehicles while increasing safety and decreasing price. PDF icon...

  6. National Grid Generation, LLC | Open Energy Information

    Open Energy Info (EERE)

    National Grid Generation, LLC (Redirected from KeySpan Generation LLC) Jump to: navigation, search Name: National Grid Generation, LLC Place: New York Service Territory:...

  7. Can Automotive Battery Recycling Help Meet Lithium Demand? |...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Can Automotive Battery Recycling Help Meet Lithium Demand? Title Can Automotive Battery Recycling Help Meet Lithium Demand? Publication Type Presentation Year of Publication 2013...

  8. ITP Aluminum: Aluminum Industry Roadmap for the Automotive Market...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Aluminum Industry Roadmap for the Automotive Market (May 1999) ITP Aluminum: Aluminum Industry Roadmap for the Automotive Market (May 1999) autoroadmap.pdf More Documents &...

  9. Vehicle Technologies Office Merit Review 2015: 88 Kilowatt Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    88 Kilowatt Automotive Inverter with New 900 Volt Silicon Carbide MOSFET Technology Vehicle Technologies Office Merit Review 2015: 88 Kilowatt Automotive Inverter with New 900 Volt...

  10. Develop Thermoelectric Technology for Automotive Waste Heat Recovery...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ace45yang.pdf More Documents & Publications Develop Thermoelectric Technology for Automotive Waste Heat Recovery Engineering and Materials for Automotive Thermoelectric...

  11. FY 2009 Progress Report for Lightweighting Materials - 6. Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6. Automotive Metals - Crosscutting FY 2009 Progress Report for Lightweighting Materials - 6. Automotive Metals - Crosscutting The primary Lightweight Materials activity goal is to...

  12. AMD 405: Improved Automotive Suspension Components Cast with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AMD 405: Improved Automotive Suspension Components Cast with B206 Alloy AMD 405: Improved Automotive Suspension Components Cast with B206 Alloy 2011 DOE Hydrogen and Fuel Cells...

  13. CX: Categorical Determination-Alcoa Tennessee Automotive Sheet...

    Office of Environmental Management (EM)

    CX: Categorical Determination-Alcoa Tennessee Automotive Sheet Expansion Project CX: Categorical Determination-Alcoa Tennessee Automotive Sheet Expansion Project Categorical...

  14. Direct Hydrogen PEMFC Manufacturing Cost Estimation for Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Direct Hydrogen PEMFC Manufacturing Cost Estimation for Automotive Applications: Fuel Cell Tech Team Review Direct Hydrogen PEMFC Manufacturing Cost Estimation for Automotive...

  15. FY 2008 Progress Report for Lightweighting Materials - 2. Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2. Automotive Metals-Wrought FY 2008 Progress Report for Lightweighting Materials - 2. Automotive Metals-Wrought Lightweighting Materials focuses on the development and validation...

  16. Hybrid method for aerodynamic shape optimization in automotive industry

    E-Print Network [OSTI]

    Dumas, Laurent

    Hybrid method for aerodynamic shape optimization in automotive industry Freedeerique Muyl precisely the reduction of their drag coefficient, becomes one of the main topics of the automotive research

  17. Fact #868: April 13, 2015 Automotive Technology Has Improved...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8: April 13, 2015 Automotive Technology Has Improved Performance and Fuel Economy of New Light Vehicles Fact 868: April 13, 2015 Automotive Technology Has Improved Performance and...

  18. Engaging the Next Generation of Automotive Engineers through...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engaging the Next Generation of Automotive Engineers through Advanced Vehicle Technology Competition Engaging the Next Generation of Automotive Engineers through Advanced Vehicle...

  19. Electrohydraulic Forming of Near Net Shape Automotive Panels

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electrohydraulic Forming of Near Net Shape Automotive Panels The Development of Advancing Automotive Panel Manufacturing for Increased Energy and Material Savings The U.S....

  20. Membrane Performance and Durability Overview for Automotive Fuel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Membrane Performance and Durability Overview for Automotive Fuel Cell Applications Membrane Performance and Durability Overview for Automotive Fuel Cell Applications Presented by...

  1. FY 2008 Progress Report for Lightweighting Materials - 5. Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5. Automotive Metals-Steel FY 2008 Progress Report for Lightweighting Materials - 5. Automotive Metals-Steel Lightweighting Materials focuses on the development and validation of...

  2. FY 2008 Progress Report for Lightweighting Materials - 4. Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4. Automotive Metals-Titanium FY 2008 Progress Report for Lightweighting Materials - 4. Automotive Metals-Titanium Lightweighting Materials focuses on the development and...

  3. PENN STATE DOE GRADUATE AUTOMOTIVE TECHNOLOGY EDUCATION (GATE...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PENN STATE DOE GRADUATE AUTOMOTIVE TECHNOLOGY EDUCATION (GATE) PROGRAM FOR PENN STATE DOE GRADUATE AUTOMOTIVE TECHNOLOGY EDUCATION (GATE) PROGRAM FOR 2009 DOE Hydrogen Program and...

  4. FY 2009 Progress Report for Lightweighting Materials - 3. Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3. Automotive Metals - Cast FY 2009 Progress Report for Lightweighting Materials - 3. Automotive Metals - Cast The primary Lightweight Materials activity goal is to validate a...

  5. FY 2009 Progress Report for Lightweighting Materials - 4. Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4. Automotive Metals - Titanium FY 2009 Progress Report for Lightweighting Materials - 4. Automotive Metals - Titanium The primary Lightweight Materials activity goal is to...

  6. Michigan: Universities Train Next Generation of Automotive Engineers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Michigan: Universities Train Next Generation of Automotive Engineers Michigan: Universities Train Next Generation of Automotive Engineers November 6, 2013 - 12:00am Addthis...

  7. FY 2009 Progress Report for Lightweighting Materials - 5. Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5. Automotive Metals - Steel FY 2009 Progress Report for Lightweighting Materials - 5. Automotive Metals - Steel The primary Lightweight Materials activity goal is to validate a...

  8. FY 2008 Progress Report for Lightweighting Materials - 6. Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6. Automotive Metals-Crosscutting FY 2008 Progress Report for Lightweighting Materials - 6. Automotive Metals-Crosscutting Lightweighting Materials focuses on the development and...

  9. High Efficiency Full Expansion (FEx) Engine for Automotive Application...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Full Expansion (FEx) Engine for Automotive Applications High Efficiency Full Expansion (FEx) Engine for Automotive Applications Large increases in engine thermal efficiency result...

  10. FY 2009 Progress Report for Lightweighting Materials - 2. Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2. Automotive Metals - Wrought FY 2009 Progress Report for Lightweighting Materials - 2. Automotive Metals - Wrought The primary Lightweight Materials activity goal is to validate...

  11. FY 2008 Progress Report for Lightweighting Materials - 3. Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3. Automotive Metals-Cast FY 2008 Progress Report for Lightweighting Materials - 3. Automotive Metals-Cast Lightweighting Materials focuses on the development and validation of...

  12. Low Cost PM Technology for Particle Reinforced Titanium Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Titanium Automotive Components: Manufacturing Process Feasibility StudyAMD 310 Low Cost PM Technology for Particle Reinforced Titanium Automotive Components: Manufacturing...

  13. DOE Zero Energy Ready Home Case Study, Weiss Building & Development, LLC., System Home, River Forest, Illinois

    SciTech Connect (OSTI)

    none,

    2013-09-01

    The Passive House Challenge Home located in River Forest, Illinois, is a 5-bedroom, 4.5-bath, 3,600 ft2 two-story home (plus basement) that costs about $237 less per month to operate than a similar sized home built to the 2009 IECC. For a home with no solar photovoltaic panels installed, it scored an amazingly low 27 on the Home Energy Rating System (HERS) score.An ENERGY STAR-rated dishwasher, clothes washer, and refrigerator; an induction cooktop, condensing clothes dryer, and LED lighting are among the energy-saving devices inside the home. All plumbing fixtures comply with EPA WaterSense criteria. The home was awarded a 2013 Housing Innovation Award in the "systems builder" category.

  14. Automotive Stirling Engine Development Program. RESD Summary report

    SciTech Connect (OSTI)

    Not Available

    1984-05-01

    This is the final report compiling a summary of the information presented and discussed at the May 1983 Automotive Stirling Engine (AES) Reference Engine System Design (RESD) review held at the NASA Lewis Research Center. The design of the engine and its auxiliaries and controls is described. Manufacturing costs in production quantity are also presented. Engine system performance predictions are discussed and vehicle integration is developed, along with projected fuel economy levels.

  15. Systems Engineering and Innovation in Control--anSystems Engineering and Innovation in Control an Industry Perspective and an Application to Automotive

    E-Print Network [OSTI]

    Bernstein, Joseph B.

    Systems Engineering and Innovation in Control--anSystems Engineering and Innovation in Control Pulp & Paper Cross/Machine Directional Control · Up to 50% higher performance · 50-80% lower cost savings · Low setup costs Commercial Aircraft B787, C919 EPIC, APEX · Stabilization of unstable

  16. Faculty of Engineering Mechanical, Automotive and

    E-Print Network [OSTI]

    Faculty of Engineering Mechanical, Automotive and Materials Engineering The field of Mechanical Engineering includes two broad areas of study. The first involves heat and power, and is referred, Automotive and Materials Engineering offers a multi-faceted program where you tackle real-world problems

  17. Electronic Document Management System PIA, BechtelJacobs Company...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Management System PIA, BechtelJacobs Company, LLC Electronic Document Management System PIA, BechtelJacobs Company, LLC Electronic Document Management System PIA, BechtelJacobs...

  18. Integrity Automotive | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource History View NewGuam:on OpeneiAlbanian Centre forBibliography ofAutomotive Jump

  19. Enterprise Campuses Clemson University International Center for Automotive Research (CUICAR)

    E-Print Network [OSTI]

    Stuart, Steven J.

    Enterprise Campuses Clemson University International Center for Automotive Research (CUICAR collaborate to create a global venue for the automotive industry. CU-ICAR is home to the nation's only graduate Department of Automotive Engineering. CU-ICAR's diverse research portfolio is driven by automotive

  20. Timing verification of automotive communication architecture using quantile estimation

    E-Print Network [OSTI]

    Navet, Nicolas

    Timing verification of automotive communication architecture using quantile estimation Nicolas;1 Outline - 207/02/2014ERTSS'2014 Early-stage timing verification of wired automotive buses ­ CAN for quantiles derived by simulation 2 typical automotive use-cases #12;2 Automotive communication architectures

  1. Strategies for Burr Minimization and Cleanability in Aerospace and Automotive Manufacturing

    E-Print Network [OSTI]

    Avila, Miguel C.; Gardner, Joel D.; Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

    2006-01-01

    aerospace and automotive industries has become increasinglythe aerospace and automotive industry, only during the pastLMA partners in the automotive industry. formation and crown

  2. Reducing the Environmental Footprint and Economic Costs of Automotive Manufacturing through an Alternative Energy Supply

    E-Print Network [OSTI]

    Yuan, Chris; Dornfeld, David

    2009-01-01

    ABSTRACT The automotive industry consumes a significantINTRODUCTION The automotive industry consumes a significantVOC, PM, and so on. The automotive industry has made a great

  3. Keiretsu, Governance, and Learning: Case Studies in Change from the Japanese Automotive Industry

    E-Print Network [OSTI]

    Ahmadjian, Christina L.; Lincoln, James R.

    2000-01-01

    in the Japanese Automotive Industry. Columbia Universityfrom the Japanese automotive industry Christina L. Ahmadjianchange from the Japanese automotive industry ABSTRACT The “

  4. Strategies for Burr Minimization and Cleanability in Aerospace and Automotive Manufacturing

    E-Print Network [OSTI]

    Ávila, Miguel C.; Gardner, Joel D.; Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

    2006-01-01

    the Aerospace and Automotive Industry“, SAE Transactions J.aerospace and automotive industries has become increasinglyaerospace and automotive industries has become increasingly

  5. Strategies for Burr Minimization and Cleanability in Aerospace and Automotive Manufacturing

    E-Print Network [OSTI]

    Avila, Miguel C.; Gardner, Joel D.; Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

    2006-01-01

    in Aerospace and Automotive Manufacturing Miguel Ávila, Joelin the aerospace and automotive industries has becomes in the aerospace and automotive industry, only during the

  6. Strategies for Burr Minimization and Cleanability in Aerospace and Automotive Manufacturing

    E-Print Network [OSTI]

    Ávila, Miguel C.; Gardner, Joel D.; Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

    2006-01-01

    in Aerospace and Automotive Manufacturing Author: Avila,in the Aerospace and Automotive Industry“, SAE Transactionsin the aerospace and automotive industries has become

  7. Reducing the Environmental Footprint and Economic Costs of Automotive Manufacturing through an Alternative Energy Supply

    E-Print Network [OSTI]

    Yuan, Chris; Dornfeld, David

    2009-01-01

    air usage patterns in automotive manufacturing. ” Journal ofAND ECONOMIC COSTS OF AUTOMOTIVE MANUFACTURING THROUGH ANBerkeley Berkeley, CA KEYWORDS Automotive Manufacturing,

  8. Alternative Representations of Statistical Measures in Computer Tools to Promote Communication between Employees in Automotive Manufacturing

    E-Print Network [OSTI]

    Bakker, Arthur; Kent, Phillip; Noss, Richard; Hoyles, Celia

    2009-01-01

    and to lower costs. The automotive industry is a leadingcontrol (SPC) in an automotive assembly plant. Assumevery significant for automotive manufacture as the principle

  9. A Decision-Based Analysis of Compressed Air Usage Patterns in Automotive Manufacturing

    E-Print Network [OSTI]

    Yuan, Chris; Zhang, Teresa; Rangarajan, Arvind; Dornfeld, David; Ziemba, Bill; Whitbeck, Rod

    2006-01-01

    Air Usage Patterns in Automotive Manufacturing Chris Y. Yuanper vehicle built from automotive manufacturing facilities,2004). Compressed Air in Automotive Manufacturing Compressed

  10. Nuclear Waste Partnership, LLC

    Office of Environmental Management (EM)

    Nuclear Waste Partnership, LLC Waste Isolation Pilot Plant Report from the Department of Energy Voluntary Protection Program Onsite Review March 17-27, 2015 U.S. Department of...

  11. Complexity reduction in automotive design and development

    E-Print Network [OSTI]

    Ziegler, Ronald J., 1965-

    2005-01-01

    Automobiles are complex products. High product complexity drives high levels of design and process complexity and complicatedness. This thesis attempts to reduce complicatedness in the automotive vehicle design and development ...

  12. Driver expectancy in locating automotive controls 

    E-Print Network [OSTI]

    Francis, Dawn Suzette

    1990-01-01

    DRIVER EXPECTANCY IN LOCATING AUTOMOTIVE CONTROLS A Thesis by DAWN SUZETTE FRANCIS Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May 1990... Major Subject: Industrial Engineering DRIVER EXPECTANCY IN LOCATING AUTOMOTIVE CONTROLS A Thesis by DAWN SUZETTE FRANCIS Approved as to style and content by: R. Dale Huchi son (Chair of Committee) Rodger . . ppa (Member) Waymon L ohnston (M er...

  13. Contactless magnetic brake for automotive applications 

    E-Print Network [OSTI]

    Gay, Sebastien Emmanuel

    2009-05-15

    MAGNETIC BRAKE FOR AUTOMOTIVE APPLICATIONS A Dissertation by SEBASTIEN EMMANUEL GAY Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY... May 2005 Major Subject: Electrical Engineering CONTACTLESS MAGNETIC BRAKE FOR AUTOMOTIVE APPLICATIONS A Dissertation by SEBASTIEN EMMANUEL GAY Submitted to Texas A&M University in partial fulfillment of the requirements...

  14. Fuel Cells for Non-automotive Uses: Status and Prospects

    SciTech Connect (OSTI)

    Upreti, Girish [ORNL; Greene, David L [ORNL; Duleep, K. G. [ICF International; Sawhney, Rupinder S [ORNL

    2012-01-01

    Fuel cells are in varying stages ofcommercialization for both automotive and non-automotive applications. The fuel cell industry has made substantial progress but still needs to reduce costs and improve performance to compete successfully with established technologies. In just 5 years, costs have been reduced by a factor of two while improving efficiency and durability. Based on interviews with fuel cell manufacturers in the U.S., Japan and the EU and information from published sources, a model of non-automotive fuel cell markets is constructed and used to estimate the impacts of government policies and to project the potential evolution of the industry to 2025. The model includes the effects of learning-by-doing, scale economies and exogenous technological progress on component and system costs, estimates customer choices between fuel cell and competing established technologies, and attempts to measure the impacts of government policies. With continued policy support it appears likely that the industry can become self-sustaining within the next decade.

  15. 2 | energy & automotive research laboratory2 | energy & automotive research laboratory Creating Sustainable Energy Solutions

    E-Print Network [OSTI]

    Feeny, Brian

    nergy& utomotive esearch aboratory #12;2 | energy & automotive research laboratory2 | energy & automotive research laboratory Creating Sustainable Energy Solutions on the cover: A prototype cylinder head-third of all the energy used in the country. The critical need to reduce the nation's dependence on oil imports

  16. Doing More With Less: Cost-Effective Infrastructure for Automotive Vision Capabilities

    E-Print Network [OSTI]

    Pollefeys, Marc

    The Challenge Many cyber-physical systems must operate in situations where accurately understanding is automotive systems. In this domain, a proliferation of advanced sensor technology is being fueled lane-keeping, adaptive cruise control, and collision avoidance/mitigation systems, are becoming

  17. This is the author's version of the work. The definitive work was published in GMM-Fachbericht 72 -Automotive meets Electronics (AmE 2012), pp. 116 -121, 2012. This work was supported in part by the German Federal Ministry of Education and Research (BMBF)

    E-Print Network [OSTI]

    Teich, Jürgen

    - Automotive meets Electronics (AmE 2012), pp. 116 - 121, 2012. This work was supported in part by the German Virtual Prototyping of Automotive E/E Architectures Sebastian Graf, Thomas Russ, Michael Glaß, and Jürgen presents a system-level modeling approach for MOST150-based automotive networks and extends an exist- ing

  18. Third annual report to Congress on the automotive technology development program

    SciTech Connect (OSTI)

    Not Available

    1982-03-01

    The Automotive Propulsion Research and Development Act of 1978 focused on advancing the technology of automotive propulsion systems. In formulating the Act, Congress found that: (1) existing automobiles do not meet the Nation's long-term environmental and energy goals; (2) insufficient resources are being devoted to research and development (R and D) on advanced automobile propulsion systems; (3) with sufficient R and D, alternatives to existing systems could meet long-term goals at reasonable cost; and (4) expanded R and D would complement and stimulate corresponding private sector efforts. Because of the Nation's energy problems, Congress felt that advanced automobile propulsion system technology should be developed quickly. Through the Act, Congress expressed its intent for the Department of Energy (DOE) to: (1) make R and D contracts and grants for development of advanced automobile propulsion systems within five years, or within the shortest practicable time consistent with appropriate R and D techniques; (2) evaluate and disseminate information about advanced automobile propulsion system technology; (3) preserve, enhance, and facilitate competition in R and D of existing and alternative automotive propulsion systems; and (4) supplement, but neither supplant nor duplicate, private industry R and D efforts. Summaries of the status of conventional powertrain technology, automotive technology development program, and the management plan and policy transition are given. Tables on contracts and grant procurement for advanced gas turbine engine systems, advanced Stirling engine systems, and the vehicle systems project are given. (WHK)

  19. Integrated End-to-End Timing Analysis of Networked AUTOSAR-Compliant Systems

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    embedded systems is growing at a very rapid pace. Hence, the automotive industry has been developing Distributed embedded systems employed in the automotive industry are increasing in both scale. In order to deal with such complexity, the automotive industry formed a partnership called the Automotive

  20. Interim Update: Global Automotive Power Electronics R&D Relevant...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Interim Update: Global Automotive Power Electronics R&D Relevant To DOE 2015 and 2020 Cost Targets Interim Update: Global Automotive Power Electronics R&D Relevant To DOE 2015 and...

  1. Electrocatalysts for Automotive Fuel Cells: Status and Challenges

    Broader source: Energy.gov [DOE]

    Presentation by Nilesh Dale for the 2013 DOE Catalyst Working Group Meeting on electrocatalysts for automotive fuel cells.

  2. Develop Thermoelectric Technology for Automotive Waste Heat Recovery...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Develop Thermoelectric Technology for Automotive Waste Heat Recovery Cost-Competitive Advanced Thermoelectric Generators for Direct...

  3. The Challenges for PEMFC Catalysts in Automotive Applications

    Broader source: Energy.gov [DOE]

    Presentation by Stephen Campbell for the 2013 DOE Catalysis Working Group Meeting on PEMFC catalysts in automotive applications.

  4. Develop Thermoelectric Technology for Automotive Waste Heat Recovery...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Skutterudite Thermoelectric Generator For Automotive Waste Heat Recovery Thermoelectric Conversion of Exhaust Gas Waste Heat into Usable...

  5. FOA for the Demonstration of an Integrated Biorefinery System...

    Energy Savers [EERE]

    Abengoa Bioenergy Biomass of Kansas, LLC FOA for the Demonstration of an Integrated Biorefinery System: Abengoa Bioenergy Biomass of Kansas, LLC FOA for the Demonstration of an...

  6. Multicore scheduling in automotive ECUs Aurlien Monot1,2

    E-Print Network [OSTI]

    Navet, Nicolas

    , multicore ECUs are be- ing gradually introduced in the automotive domain. Those multicore platforms offerMulticore scheduling in automotive ECUs Aurélien Monot1,2 , Nicolas Navet3 , Françoise Simonot1 power is quickly increasing in the automotive domain, car manufactur- ers and tier-one suppliers

  7. Towards Characterizing and Classifying Communication-based Automotive Applications

    E-Print Network [OSTI]

    Xu, Wenyuan

    Towards Characterizing and Classifying Communication-based Automotive Applications from a Wireless opportunity to develop various types of communication-based automotive applications. To date, many applications have been identified by the automotive community. Given the large number and diverse nature

  8. A Review of Embedded Automotive Protocols Nicolas Navet

    E-Print Network [OSTI]

    Navet, Nicolas

    A Review of Embedded Automotive Protocols Nicolas Navet 1 , Françoise Simonot-Lion 2 April 14, 2008 of a large number of automotive networks such as LIN, J1850, CAN, FlexRay, MOST, etc.. This pa- per rst is given. Next, the current eorts of the automotive industry on middleware technologies which may

  9. Reliability and Throughput in Future Automotive Communication Networks

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    Reliability and Throughput in Future Automotive Communication Networks John Liu, Timothy TaltyStar. This action created a new industry called automotive telematics, helping to save lives and providing, the automotive telematics industry has experienced a healthy growth in North America. During the current economic

  10. Fostering Innovation and Investment In Ontario's Automotive Industry

    E-Print Network [OSTI]

    Haykin, Simon

    Fostering Innovation and Investment In Ontario's Automotive Industry Presentation to The First Development and Trade - Ontario #12;Ontario Automotive Industry · The auto industry has been in Ontario Ontario-US MidWest automotive region: 1 in 6 vehicles built in NA · Approximately 133,000 workers

  11. Computer Graphic Tools for Automotive Paint Engineering Gary W. Meyer

    E-Print Network [OSTI]

    Minnesota, University of

    Computer Graphic Tools for Automotive Paint Engineering Gary W. Meyer University of Minnesota graphics programs that can be used to solve automotive paint engineering problems. New surface reflection models have been created for simulating the appearance of automotive paint, and the hardware available

  12. Framework for Security and Privacy in Automotive Telematics

    E-Print Network [OSTI]

    Gruteser, Marco

    Framework for Security and Privacy in Automotive Telematics Sastry Duri, Marco Gruteser, Xuan Liu Skyline Drive Hawthorne, New York 10532 ABSTRACT Automotive telematics may be defined as the information of data to obtain remote services. In order for automotive telematics to grow to its full potential

  13. Analysis and Clustering of Model Clones: An Automotive Industrial Experience

    E-Print Network [OSTI]

    Cordy, James R.

    Analysis and Clustering of Model Clones: An Automotive Industrial Experience Manar H. Alalfi, James similarity in industrial automotive models. We apply our model clone detection tool, SIMONE, to identify and suggests better ways to maintain them. I. INTRODUCTION In todays automotive industry, models are widely

  14. Model based dependability evaluation for automotive control functions

    E-Print Network [OSTI]

    Schlingloff, Holger

    Model based dependability evaluation for automotive control functions Sasa Vulinovic 1 , Bernd@informatik.hu-berlin.de Abstract In this paper, we study the evaluation of reliability for embedded functions in automotive. In order to assess fault tolerant designs for automotive software it is essential to be able to predict

  15. Design Automation Challenges in Automotive CPS Sayan Mitra

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    Design Automation Challenges in Automotive CPS Sayan Mitra mitras@illinois.edu In principle, best theorem proving. Unfortunately, a stan- dardized open repository of benchmarks for automotive CPS-up companies, in which each play a role and the automotive CPS community flourishes. A good benchmark

  16. Challenges for Qualitative Electrical Reasoning in Automotive Circuit Simulation

    E-Print Network [OSTI]

    Snooke, Neal

    Challenges for Qualitative Electrical Reasoning in Automotive Circuit Simulation Neal Snooke it to be used for applications on realistic automotive circuits. The type of circuits for which it is most automotive circuits with more complex overall behaviour can be approximated using this type of modelling

  17. Vehicle Electronics Exponential growth in automotive electronics as

    E-Print Network [OSTI]

    Stuart, Steven J.

    1 Vehicle Electronics #12; Exponential growth in automotive electronics as measured by: 2 ­ Number to keep up. 5 The automotive industry does not (yet) fully appreciate the challenges associated, May 2013. Automotive Testing Technology International, Nov. 2012. Project Goal: Develop a method

  18. Modeling Buffers with Data Refresh Semantics in Automotive Architectures

    E-Print Network [OSTI]

    Plotkin, Joshua B.

    Modeling Buffers with Data Refresh Semantics in Automotive Architectures Linh T.X. Phan1 Reinhard,lee}@cis.upenn.edu reinhard.schneider@rcs.ei.tum.de samarjit@tum.de ABSTRACT Automotive architectures consist of multiple estimate various timing and perfor- mance metrics for automotive ECU networks consisting of buffers

  19. Nonlinear Control for Magnetic Levitation of Automotive Engine Valves

    E-Print Network [OSTI]

    Grizzle, Jessy W.

    1 Nonlinear Control for Magnetic Levitation of Automotive Engine Valves Katherine Peterson, Member for and implemented on an electromagnetic valve actuator for use in automotive engines, the control methodology, it is experimentally eval- uated on an electromagnetic valve actuator designed for use in the actuation of automotive

  20. Automotive Powertrain Control: A Survey Jeffrey A. Cook, Jing Sun

    E-Print Network [OSTI]

    Grizzle, Jessy W.

    Automotive Powertrain Control: A Survey Jeffrey A. Cook, Jing Sun Julia H. Buckland, Ilya V recent and historical publications on automotive powertrain control. Control- oriented models of gasoline, hybrid electric powertrains and automotive fuel cells. In each case, fundamental models are discussed

  1. Automated Verification of Model Transformations in the Automotive Industry

    E-Print Network [OSTI]

    Cordy, James R.

    Automated Verification of Model Transformations in the Automotive Industry Gehan M. K. Selim1 Verification, Automotive In- dustry 1 Introduction Model Driven Development (MDD) has been increasingly used of the Pays de la Loire Region (France), and by NSERC (Canada), as part of the NECSIS Automotive Partnership

  2. automotive excellence Why Coventry University received a Royal

    E-Print Network [OSTI]

    automotive excellence Why Coventry University received a Royal approval in Transport and Product of the Queen's Anniversary prize for Higher and Further Education for its work in automotive design. Already a Centre of Excellence in Teaching and Learning in Product and Automotive Design in the UK, the Department

  3. EIS-0428: Mississippi Gasification, LLC, Industrial Gasification...

    Office of Environmental Management (EM)

    8: Mississippi Gasification, LLC, Industrial Gasification Facility in Moss Point, MS EIS-0428: Mississippi Gasification, LLC, Industrial Gasification Facility in Moss Point, MS...

  4. EIS-0429: Indiana Gasification, LLC, Industrial Gasification...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Indiana Gasification, LLC, Industrial Gasification Facility in Rockport, IN and CO2 Pipeline EIS-0429: Indiana Gasification, LLC, Industrial Gasification Facility in Rockport, IN...

  5. Enforcement Letter, National Security Technologies, LLC - November...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    November 13, 2007 Enforcement Letter, National Security Technologies, LLC - November 13, 2007 November 13, 2007 Issued to National Security Technologies, LLC related to an...

  6. Past experiences with automotive external combustion engines

    SciTech Connect (OSTI)

    Amann, C.A.

    1999-07-01

    GMR (General Motors Research Laboratories, now GM R and D Center) has a history of improving the internal combustion engine, especially as it relates to automotive use. During the quarter century from 1950--75, considerable effort was devoted to evaluating alternative powerplants based on thermodynamic cycles different from those on which the established spark-ignition and diesel engines are founded. Two of these, the steam engine and the Stirling engine, incorporated external combustion. Research on those two alternatives is reviewed. Both were judged to fall short of current needs for commercial success as prime movers for conventional automotive vehicles.

  7. Mod I automotive Stirling engine mechanical development

    SciTech Connect (OSTI)

    Simetkosky, M.

    1984-01-01

    The Mod I Stirling engine was the first automotive Stirling engine designed specifically for automotive application. Testing of these engines has revealed several deficiencies in engine mechanical integrity which have been corrected by redesign or upgrade. The main deficiencies uncovered during the Mod I program lie in the combustion, auxiliary, main seal, and heater head areas. This paper will address each of the major area deficiencies in detail, and describe the corrective actions taken as they apply to the Mod I and the next Stirling-engine design, the Upgraded Mod I (a redesign to incorporate new materials for cost/weight reduction and improved performance).

  8. Electrohydraulic Forming of Near-Net Shape Automotive Panels

    SciTech Connect (OSTI)

    Golovaschenko, Sergey F.

    2013-09-26

    The objective of this project was to develop the electrohydraulic forming (EHF) process as a near-net shape automotive panel manufacturing technology that simultaneously reduces the energy embedded in vehicles and the energy consumed while producing automotive structures. Pulsed pressure is created via a shockwave generated by the discharge of high voltage capacitors through a pair of electrodes in a liquid-filled chamber. The shockwave in the liquid initiated by the expansion of the plasma channel formed between two electrodes propagates towards the blank and causes the blank to be deformed into a one-sided die cavity. The numerical model of the EHF process was validated experimentally and was successfully applied to the design of the electrode system and to a multi-electrode EHF chamber for full scale validation of the process. The numerical model was able to predict stresses in the dies during pulsed forming and was validated by the experimental study of the die insert failure mode for corner filling operations. The electrohydraulic forming process and its major subsystems, including durable electrodes, an EHF chamber, a water/air management system, a pulse generator and integrated process controls, were validated to be capable to operate in a fully automated, computer controlled mode for forming of a portion of a full-scale sheet metal component in laboratory conditions. Additionally, the novel processes of electrohydraulic trimming and electrohydraulic calibration were demonstrated at a reduced-scale component level. Furthermore, a hybrid process combining conventional stamping with EHF was demonstrated as a laboratory process for a full-scale automotive panel formed out of AHSS material. The economic feasibility of the developed EHF processes was defined by developing a cost model of the EHF process in comparison to the conventional stamping process.

  9. Passive Two-Phase Cooling of Automotive Power Electronics: Preprint

    SciTech Connect (OSTI)

    Moreno, G.; Jeffers, J. R.; Narumanchi, S.; Bennion, K.

    2014-08-01

    Experiments were conducted to evaluate the use of a passive two-phase cooling strategy as a means of cooling automotive power electronics. The proposed cooling approach utilizes an indirect cooling configuration to alleviate some reliability concerns and to allow the use of conventional power modules. An inverter-scale proof-of-concept cooling system was fabricated, and tests were conducted using the refrigerants hydrofluoroolefin HFO-1234yf and hydrofluorocarbon HFC-245fa. Results demonstrated that the system can dissipate at least 3.5 kW of heat with 250 cm3 of HFC-245fa. An advanced evaporator design that incorporates features to improve performance and reduce size was conceived. Simulation results indicate its thermal resistance can be 37% to 48% lower than automotive dual side cooled power modules. Tests were also conducted to measure the thermal performance of two air-cooled condensers--plain and rifled finned tube designs. The results combined with some analysis were then used to estimate the required condenser size per operating conditions and maximum allowable system (i.e., vapor and liquid) temperatures.

  10. Exploring Virtual Depth for Automotive Instrument Cluster

    E-Print Network [OSTI]

    Exploring Virtual Depth for Automotive Instrument Cluster Concepts Nora Broy1,2,3 , Benedikt Zierer instrument cluster. Permission to make digital or hard copies of part or all of this work for personal more pronounced as auto-stereoscopic displays become available for the car. For instance, H¨akkil¨a et

  11. Response Surface Methodology Its application to automotive

    E-Print Network [OSTI]

    Awtar, Shorya

    . Introduction & Basis of RSM 1. History of RSM 2. What's RSM 3. Why is RSM 4. Least square method 5. Design Of Experiment (DOE) II. Its application to automotive suspension designs 1. Size optimization for beam stiffens and Basis of Response surface Methodology (RSM) #12;Toyota Central R&D Labs., Inc 4 History of RSM 1951 Box

  12. FRENCH APPROVAL PROCEDURES FOR PYROTECHNICAL AUTOMOTIVE SAFETY

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    equipments such gas generators for airbag modules or seat-belt pretensioners, pyrotechnic relay compositions and/or igniters inside those gas generators fall into that case. The approval procedure, test methods specify that pyrotechnical devices for automotive safety, relay compositions and igniters in such devices

  13. Application, Rendering and Display of Automotive Paint

    E-Print Network [OSTI]

    Meyer, Gary

    Application, Rendering and Display of Automotive Paint by Jonathan Konieczny Dr Gary W. MeyerPont Paints was kind enough to allow us to visit their own paint testing facility and track their spray painters using real spray guns. The data gathered from that visit was essential to creating the spray paint

  14. EA-351 DC Energy Dakota, LLC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dakota, LLC Order authorizing DC Energy Dakota, LLC to export electric energy to Canada EA-351 DC Energy Dakota, LLC More Documents & Publications Application to Export...

  15. EA-341 Photovoltaic Technologies, LLC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EA-341 Photovoltaic Technologies, LLC EA-341 Photovoltaic Technologies, LLC Order authorizing Photovoltaic Technologies, LLC to export electric energy to Mexico EA- 341...

  16. EA-213-A Coral Power, LLC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Coral Power, LLC Order authorizing Coral Power, LLC to export electric energy to Canada. EA-213-A Coral Power, LLC More Documents & Publications EA-212-C Coral Power, LLC...

  17. the polytechnic school Engineering (Automotive Systems), BSE

    E-Print Network [OSTI]

    : General Chemistry II (SQ) GLG 101: Introduction to Geology I (Physical) (SQ) GLG 103: Introduction (Physical) (SQ) GLG 103: Introduction to Geology I - Laboratory (SQ) PHY 122: University Physics Laboratory to Geology I - Laboratory (SQ) PHY 122: University Physics Laboratory I (SQ) PHY 131: University Physics II

  18. Autonomie: Automotive System Design | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O DBiomass andAtoms

  19. Automotion of domain walls for spintronic interconnects

    SciTech Connect (OSTI)

    Nikonov, Dmitri E.; Manipatruni, Sasikanth; Young, Ian A.

    2014-06-07

    We simulate “automotion,” the transport of a magnetic domain wall under the influence of demagnetization and magnetic anisotropy, in nanoscale spintronic interconnects. In contrast to spin transfer driven magnetic domain wall motion, the proposed interconnects operate without longitudinal charge current transfer, with only a transient current pulse at domain wall creation and have favorable scaling down to the 20?nm dimension. Cases of both in-plane and out-of-plane magnetization are considered. Analytical dependence of the velocity of domain walls on the angle of magnetization are compared with full micromagnetic simulations. Deceleration, attenuation and disappearance, and reflection of domain walls are demonstrated through simulation. Dependences of the magnetization angle on the current pulse parameters are studied. The energy and delay analysis suggests that automotion is an attractive option for spintronic logic interconnects.

  20. Final report: U.S. competitive position in automotive technologies

    SciTech Connect (OSTI)

    Albert, Michael B.; Cheney, Margaret; Thomas, Patrick; Kroll, Peter

    2002-09-30

    Patent data are presented and analyzed to assess the U.S. competitive position in eleven advanced automotive technology categories, including automotive fuel cells, hydrogen storage, advanced batteries, hybrid electric vehicles and others. Inventive activity in most of the technologies is found to be growing at a rapid pace, particularly in advanced batteries, automotive fuel cells and ultracapacitors. The U.S. is the clear leader in automotive fuel cells, on-board hydrogen storage and light weight materials. Japan leads in advanced batteries, hybrid electric vehicles, ultracapacitors, and appears to be close to overtaking the U.S. in other areas of power electronics.

  1. Sandia Energy - ECIS-Automotive Fuel Cell Corporation: Hydrocarbon...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ECIS-Automotive Fuel Cell Corporation: Hydrocarbon Membrane Fuels the Success of Future Generation Vehicles Home Energy Transportation Energy CRF Partnership Energy Efficiency...

  2. Welding of Dissimilar Materials Combinations for Automotive Applicatio...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0, 2011 Welding of Dissimilar Materials Combinations for Automotive Applications Jerry E. Gould Technology Leader Resistance and Solid State Welding ph: 614-688-5121 e-mail:...

  3. Status and Prospects of the Global Automotive Fuel Cell Industry...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Prospects of the Global Automotive Fuel Cell Industry and Plans for Deployment of Fuel Cell Vehicles and Hydrogen Refueling Infrastructure Status and Prospects of the Global...

  4. Automotive Fuel Efficiency Improvement via Exhaust Gas Waste...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Efficiency Improvement via Exhaust Gas Waste Heat Conversion to Electricity Automotive Fuel Efficiency Improvement via Exhaust Gas Waste Heat Conversion to Electricity Working...

  5. Develop Thermoelectric Technology for Automotive Waste Heat Recovery...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    deer09yang2.pdf More Documents & Publications Engineering and Materials for Automotive Thermoelectric Applications Electrical and Thermal Transport Optimization of High...

  6. Automotive Fuels - The Challenge for Sustainable Mobility | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuels - The Challenge for Sustainable Mobility Automotive Fuels - The Challenge for Sustainable Mobility Overview of challenges and future fuel options deer12warnecke.pdf More...

  7. Develop Thermoelectric Technology for Automotive Waste Heat Recovery...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Opportunities and Challenges of Thermoelectrlic Waste Heat Recovery in the Automotive Industry On Thermoelectric Properties of p-Type Skutterudites Development of...

  8. Automotive Thermoelectric Moduleswith Scalable Thermo- andElectro...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Moduleswith Scalable Thermo- and Electro-Mechanical Interfaces Automotive Thermoelectric Moduleswith Scalable Thermo- and Electro-Mechanical Interfaces Interface materials based on...

  9. Development of Thermoelectric Technology for Automotive Waste Heat Recovery

    Broader source: Energy.gov [DOE]

    Overview and status of project to develop thermoelectric generator for automotive waste heat recovery and achieve at least 10% fuel economy improvement.

  10. Brookhaven Science Associates, LLC

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirley Ann JacksonDepartment|Marketing, LLC |EnergycurrentlyJune 2012 This bookletNovember 23,

  11. Automotive Lithium-ion Battery Supply Chain and U.S. Competitiveness...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Automotive Lithium-ion Battery Supply Chain and U.S. Competitiveness Considerations Automotive Lithium-ion Battery Supply Chain and U.S. Competitiveness Considerations This Clean...

  12. US DOE Sponsored Graduate Automotive Technology Education (GATE) Program at Penn State Emphasizing

    E-Print Network [OSTI]

    Lee, Dongwon

    US DOE Sponsored Graduate Automotive Technology Education (GATE) Program at Penn State Emphasizing in the automotive industry and academia. Develop relationships between GATE students, faculty, employers

  13. Update and Expansion of the Center of Automotive Technology Excellence Under the Graduate Automotive Technology Education (GATE) Program at the University of Tennessee, Knoxville

    SciTech Connect (OSTI)

    Irick, David

    2012-08-30

    The Graduate Automotive Technology Education (GATE) Center at the University of Tennessee, Knoxville has completed its seventh year of operation under this agreement, its thirteenth year in total. During this period the Center has involved eleven GATE Fellows and three GATE Research Assistants in preparing them to contribute to advanced automotive technologies in the center’s focus area: Advanced Hybrid Propulsion and Control Systems. In addition to the impact that the Center has had on the students and faculty involved, the presence of the center has led to the acquisition of resources that probably would not have been obtained if the GATE Center had not existed. Significant industry interaction such as equipment donations, and support for GATE students has been realized. The value of the total resources brought to the university (including related research contracts) exceeds $2,000,000.

  14. Review and evaluation of automotive fuel conservation technologies. Final report

    SciTech Connect (OSTI)

    Siegel, H.M.; Schwarz, R.; Andon, J.; Kolars, G.; Gerstenberger, T.

    1981-12-01

    To support the Office of Research and Development of the National Highway Traffic Safety Administration with focused studies in areas affecting automotive fuel economy and related safety issues, a series of in-depth studies were carried out: Fuel Consumption Estimates of Stratified Charge Rotary Engines Installed in Five Vehicles; Oldsmobile Omega X Body Baseline Weight Data; GM X Body Material Substitution Weight Reduction/Cost Effectiveness Study; Calspan RSV Restraint System Cost Study; FMVSS No. 208 Extension to Light Trucks, Vans, and MPV's - Cost Lead Time Study; Multipiece Rims for Trucks, Buses, and Trailers; Identifying Design Changes, Cost Impacts and Manufacturing Lead Times to Upgrade FMVSS 114 for Passenger Cars, Trucks, and MPV's; Ford Escort GL Baseline Weight Data.

  15. IT Support for Release Management Processes in the Automotive Industry

    E-Print Network [OSTI]

    Ulm, Universität

    IT Support for Release Management Processes in the Automotive Industry Dominic M¨uller1,2 , Joachim equipment. Different life cycle times of mechanical, software and hardware components as well as different In the automotive industry, car development has been dramatically influenced by the introduction of electrical

  16. ME 374D Automotive Engineering laboratory ABET EC2000 syllabus

    E-Print Network [OSTI]

    Ben-Yakar, Adela

    . Awareness of contemporary issues in engineering practice, including economic, social, political the ability to: A. Apply principles of engineering, basic science, and mathematics (including multivariateME 374D ­ Automotive Engineering laboratory Page 1 ABET EC2000 syllabus ME 374D ­ Automotive

  17. Design Editorial Systems and Design

    E-Print Network [OSTI]

    Papalambros, Panos

    to support system composition · Uncertainty quantification and management · Architecture, platform Application areas can include, but are not limited to, large- to small-scale systems in aerospace, automotive

  18. Safe and compact ammonia storage/delivery systems for SCR-DeNOX...

    Energy Savers [EERE]

    Safe and compact ammonia storagedelivery systems for SCR-DeNOX in automotive units Safe and compact ammonia storagedelivery systems for SCR-DeNOX in automotive units Presentation...

  19. Waste audit study: Automotive paint shops

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    This report presents the results of a waste-audit study of automotive paint shops. The study focuses on the types and quantities of wastes generated, treatment and disposal alternatives, and the potential for reducing the amount and/or toxicity of waste generated. The analysis of solvent waste minimization focused primarily on in-plant modifications (e.g., source reduction) to reduce the generation of solvent waste. Strict inventory control is the most-readily implementable approach. While in-house recycling is viable, it is usually only cost-effective for larger firms. Specific recommendations for waste reduction were made.

  20. UP Power Marketing, LLC | Open Energy Information

    Open Energy Info (EERE)

    UP Power Marketing, LLC Jump to: navigation, search Name: UP Power Marketing, LLC Place: Michigan Phone Number: (906) 885-7100 Outage Hotline: (906) 885-7100 References: EIA Form...

  1. Patriot Renewable Fuels LLC | Open Energy Information

    Open Energy Info (EERE)

    LLC Jump to: navigation, search Name: Patriot Renewable Fuels, LLC Place: Geneseo, Illinois Zip: 61254 Product: An Illinois-based firm developing a 378m-litre (100m-gallon) per...

  2. Ovonic Hydrogen Systems LLC formerly Texaco Ovonic Hydrogen Systems LLC |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII JumpQuarterly Smart Grid DataInformationOpenOsmosisWestern UnitedOpen Energy

  3. Vehicle Technologies Office Merit Review 2015: Unitary Thermal Energy Management for Propulsion Range Augmentation (UTEMPRA)

    Broader source: Energy.gov [DOE]

    Presentation given by Delphi Automotive Systems, LLC at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about Unitary...

  4. Advance Patent Waiver W(A)2011-037

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a request by DELPHI AUTOMOTIVE SYSTEMS, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0000478.

  5. ORNL/TM-2000/283 THE COST OF AUTOMOTIVE POLYMER COMPOSITES

    E-Print Network [OSTI]

    ORNL/TM-2000/283 THE COST OF AUTOMOTIVE POLYMER COMPOSITES: A REVIEW AND ASSESSMENT OF DOE of Automotive Polymer Composites ORNL/TM-2000/283 iii TABLE OF CONTENTS LIST OF TABLES.................................................................................................................................33 #12;Cost of Automotive Polymer Composites ORNL/TM-2000/283 iv #12;Cost of Automotive Polymer

  6. Atmospheric Environment 41 (2007) 49084919 Particle size and composition distribution analysis of automotive

    E-Print Network [OSTI]

    Short, Daniel

    2007-01-01

    of automotive brake abrasion dusts for the evaluation of antimony sources of airborne particulate matter Akihiro

  7. A Consortium of the United States Council for Automotive Research Nondestructive Evaluation Steering Committee

    E-Print Network [OSTI]

    Knowles, David William

    A Consortium of the United States Council for Automotive Research Nondestructive Evaluation Automotive Industry September 6, 2006 United States Automotive Materials Partnership, A Consortium of the United States Council for Automotive Research 1000 Town Center Building, Suite 300 Southfield, MI 48075

  8. Automotive is the domain of `self propelled, motorised vehicles'. Hence, although the car is dominant, the

    E-Print Network [OSTI]

    of the automotive industry and automotive industry standards. Programme This minor consists out of an introduction context, it widens even further. The automotive industry is one of the most complex ones, in terms Automotive Design "I believe, the most significant thing happening in the global car design industry

  9. Apollo Energy III LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EAandAmminex A S Jump to:Angola onAperion Energy Systems JumpBeach,III LLC

  10. Perseus LLC (New York) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII JumpQuarterly Smart GridNorthInformation 8thPerformSystems JumpPerseusLLC

  11. Development of a test facility for the experimental evaluation of liquid and gaseous automotive engine fuels 

    E-Print Network [OSTI]

    McCanlies, John Michael

    1983-01-01

    Checkout 126 Uncertainty Analysis 131 APPENDIX F: DETAILED PROCEDURES AND ADDITIONAL BASELINE RESULTS 141 F. I F. 2 Test Procedures Additional Baseline Results 141 144 161 LIST OF TAGLES PAGE Table I: Variables to be Investigated in Original...quid methanol as a fuel for multi-cylinder automotive eng1nes. This investigation was conducted in two phases. During the first phase, the experimental test system was designed and constructed, and baseline engine performance with liquid methanol...

  12. Potential automotive uses of wrought magnesium alloys

    SciTech Connect (OSTI)

    Gaines, L.; Cuenca, R.; Wu, S. [Argonne National Lab., IL (United States); Stodolsky, F. [Argonne National Lab., IL (United States)]|[Argonne National Lab., Washington, DC (United States)

    1996-06-01

    Vehicle weight reduction is one of the major means available to improve automotive fuel efficiency. High-strength steels, aluminum (Al), and polymers are already being used to reduce weight significantly, but substantial additional reductions could be achieved by greater use of low-density magnesium (Mg) and its alloys. Mg alloys are currently used in relatively small quantities for auto parts, generally limited to die castings (e.g., housings). Argonne National Laboratory`s Center for Transportation Research has performed a study for the Lightweight Materials Program within DOE`s Office of Transportation Materials to evaluate the suitability of wrought Mg and its alloys to replace steel/aluminum for automotive structural and sheet applications. Mg sheet could be used in body nonstructural and semi-structural applications, while extrusions could be used in such structural applications as spaceframes. This study identifies high cost as the major barrier to greatly increased Mg use in autos. Two technical R and D areas, novel reduction technology and better hot-forming technology, could enable major cost reductions.

  13. Freeport LNG Expansion, L.P., FLNG Liquefaction, LLC, FLNG Liquefaction 2, LLC and FLNG Liquefaction 3, LLC- 14-005-CIC

    Broader source: Energy.gov [DOE]

    Application of Freeport LNG Expansion, L.P., FLNG Liquefaction, LLC, FLNG Liquefaction 2, LLC and FLNG Liquefaction 3, LLC to Transfer Control of Long-term Authorization to Export LNG to Free Trade...

  14. Autonomie Automotive Simulation Tool | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar Energy LLC Jump to:Greece: Energy ResourcesCooperativeEnergyAutonomie

  15. Force Modulation System for Vehicle Manufacturing | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    System for Vehicle Manufacturing Force Modulation System for Vehicle Manufacturing Novel Technology Enables Energy-Efficient Production of High-Strength Steel Automotive Parts...

  16. BTU LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar Energy LLC Jump to:Greece: EnergyMontana)District OfficeLLC Jump to:

  17. Alte LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar Energy LLC Jump to: navigation, search Name: Alliance StarAlte LLC Jump to:

  18. Applications of color powder paint in the automotive industry

    E-Print Network [OSTI]

    Barberich, Bevin, 1975-

    2004-01-01

    Both color keyed and color specific liquid primers have been used successfully in automotive paint application, reducing the use of costly topcoat materials. Generally, color keyed primer is close in color to the topcoat ...

  19. Analysis of Automotive Turbocharger Nonlinear Response Including Bifurcations 

    E-Print Network [OSTI]

    Vistamehr, Arian

    2010-10-12

    Automotive turbochargers (TCs) increase internal combustion engine power and efficiency in passenger and commercial vehicles. TC rotors are usually supported on floating ring bearings (FRBs) or semi-floating ring bearings ...

  20. Automotive Thermoelectric Moduleswith Scalable Thermo- and Electro-Mechanical Interfaces

    Broader source: Energy.gov [DOE]

    Interface materials based on carbon nanotubes and metallic alloys, scalable p- and n-type thermoelectrics, materials compatibility for improved reliability, and performance targets for automotive applications are discussed

  1. Electrical build issues in automotive product development : an analysis

    E-Print Network [OSTI]

    Chacko, John

    2008-01-01

    To be competitive and successful within the automotive industry the Original Equipment Manufacturers (OEMs) have to bring new products with features fast to market. The OEMs need to reduce the Product Development cycle ...

  2. The dynamics of supply chains in the automotive industry

    E-Print Network [OSTI]

    Braese, Niklas

    2005-01-01

    This thesis looks at how supply chains in the automotive industry operate from the perspective of the manufacturers. The study includes the industry structure, the top players in the industry, factors that drive the industry, ...

  3. Lean product development for the automotive niche vehicle marketplace

    E-Print Network [OSTI]

    Kupczewski, Celeste D., 1974-

    2005-01-01

    The automotive low volume niche vehicle marketplace is growing, evidenced by increasing media coverage and fierce competition between original equipment manufacturers. Development of niche vehicles must be lean and therefore ...

  4. Implications of two-sided advertising in the automotive industry

    E-Print Network [OSTI]

    Luke, Jeffrey O. (Jeffrey Oliver), 1967-

    2004-01-01

    The extreme competition in the automotive industry results in razor-thin profit margins as original equipment manufacturers (OEMs) compete for market share and profits which increase shareholder value. Product differentiation ...

  5. Automotive Waste Heat Conversion to Electric Power using Skutterudites...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electric Power using Skutterudites, TAGS, PbTe and Bi2Te3 Automotive Waste Heat Conversion to Electric Power using Skutterudites, TAGS, PbTe and Bi2Te3 Presentation given at DEER...

  6. Improved supplier selection and cost management for globalized automotive production

    E-Print Network [OSTI]

    Franken, Joseph P., II (Joseph Philip)

    2012-01-01

    For many manufacturing and automotive companies, traditional sourcing decisions rely on total landed cost models to determine the cheapest supplier. Total landed cost models calculate the cost to purchase a part plus all ...

  7. Distrbuted Sensing Systems for Water Quality Assesment and Management

    E-Print Network [OSTI]

    2007-01-01

    with robotic systems, embedded sensing can achieve a spatialof automotive sensor and embedded system technology resultedfor Networked Systems of Embedded Computers. ” Computer

  8. Materials, Modules, and Systems: An Atoms to Autos Approach to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials, Modules, and Systems: An Atoms to Autos Approach to Automotive Thermoelectric Systems Development Materials, Modules, and Systems: An Atoms to Autos Approach to...

  9. EA-346 Credit Suisse Energy LLC - Canada | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EA-346 Credit Suisse Energy LLC - Canada EA-346 Credit Suisse Energy LLC - Canada Order authorizing Credit Suisse Energy LLC to export electric energy to Canada EA-346 Credit...

  10. EA-346 Credit Suisse Energy LLC - Mexico | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EA-346 Credit Suisse Energy LLC - Mexico EA-346 Credit Suisse Energy LLC - Mexico Order authorizing Credit Suisse Energy LLC to export electric energy to Mexico EA-346 Credit...

  11. The investigation of exhaust powered, automotive air cycle air conditioning 

    E-Print Network [OSTI]

    Holley, James Andrew

    1978-01-01

    TEE INVESTIGATION OF EXHAUST POWERED, AUTOMOTIVE AIR CYCLE AIR CONDITIONING A Thesis James Andrew Holley Submitted to the Graduate College of Texas ASM University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE... August 1978 Major SubJect: Mechanical Engineering THE INVESTIGATION OF EXHAUST POWERED, AUTOMOTIVE AIR CYCLE AIR CONDITIONING A Thesis hy James Andrew Holley Approved as to style and content by: Chairman of Committee) (Head of Departm nt) Memb e...

  12. Abstract--The power requirements of automotive alternators are increasing significantly due to the introduction of new

    E-Print Network [OSTI]

    Perreault, Dave

    Abstract-- The power requirements of automotive alternators are increasing significantly due. INTRODUCTION The output power and power density requirements of automotive alternators are increasing research into the design of automotive generators, ranging from improvements to conventional Lundell

  13. EIS-0412: TX Energy, LLC, Industrial Gasification Facility Near...

    Office of Environmental Management (EM)

    2: TX Energy, LLC, Industrial Gasification Facility Near Beaumont, TX EIS-0412: TX Energy, LLC, Industrial Gasification Facility Near Beaumont, TX February 18, 2009 EIS-0412:...

  14. Department of Energy Cites Battelle Energy Alliance, LLC for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cites Battelle Energy Alliance, LLC for Nuclear Safety and Radiation Protection Violations Department of Energy Cites Battelle Energy Alliance, LLC for Nuclear...

  15. Energy Department Authorizes Emera CNG, LLC's Application to...

    Office of Environmental Management (EM)

    Authorizes Emera CNG, LLC's Application to Export Compressed Natural Gas Energy Department Authorizes Emera CNG, LLC's Application to Export Compressed Natural Gas October 19, 2015...

  16. Department of Energy Cites Battelle Energy Alliance, LLC for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cites Battelle Energy Alliance, LLC for Classified Information Security Violations Department of Energy Cites Battelle Energy Alliance, LLC for Classified...

  17. Energy Department Authorizes American LNG Marketing LLC's Application...

    Energy Savers [EERE]

    American LNG Marketing LLC's Application to Export Liquefied Natural Gas Energy Department Authorizes American LNG Marketing LLC's Application to Export Liquefied Natural Gas...

  18. Los Alamos National Security, LLC Los Alamos National Laboratory...

    Office of Environmental Management (EM)

    Security, LLC Los Alamos National Laboratory (LANL) Voluntary Protection Program (VPP) Assessment Los Alamos National Security, LLC Los Alamos National Laboratory (LANL) Voluntary...

  19. EA-1692: Red River Environmental Products, LLC Activated Carbon...

    Office of Environmental Management (EM)

    2: Red River Environmental Products, LLC Activated Carbon Manufacturing Facility, Red River Parish, LA EA-1692: Red River Environmental Products, LLC Activated Carbon Manufacturing...

  20. Department of Energy Cites Brookhaven Science Associates, LLC...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cites Brookhaven Science Associates, LLC for Worker Safety and Health Violations Department of Energy Cites Brookhaven Science Associates, LLC for Worker...

  1. Department of Energy Cites Battelle Energy Alliance, LLC for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cites Battelle Energy Alliance, LLC for Worker Safety and Health Violations Department of Energy Cites Battelle Energy Alliance, LLC for Worker Safety and...

  2. Department of Energy Cites Brookhaven Science Associates, LLC...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Brookhaven Science Associates, LLC for Worker Safety and Health Violations Department of Energy Cites Brookhaven Science Associates, LLC for Worker Safety and Health Violations...

  3. Challenges In Embedded System

    E-Print Network [OSTI]

    Hu, Fei

    , But No Pentiums Here Most embedded CPUs don't run an operating system either. [Santarini06] #12;5 Automotive: An Engineering View [Leen02] #12;6 How Many CPUs In A Car Seat? Car seat photo from Convergence 2004 · Automotive nodes · Reduces wiring and mechanical complexity This is a distributed embedded system! · Front

  4. East Kansas Agri-Energy, LLC

    SciTech Connect (OSTI)

    2007-12-01

    This is a combined heat and power (CHP) project profile on a 1.6 MW CHP application at East Kansas Agri-Energy, LLC in Garnett, Kansas.

  5. Enforcement Letter, Consolidated Nuclear Security, LLC - February...

    Office of Environmental Management (EM)

    issued to Consolidated Nuclear Security, LLC On February 13, 2015, the U.S. Department of Energy (DOE) Office of Enterprise Assessments' Office of Enforcement issued an Enforcement...

  6. Consent Order, Brookhaven Science Associates, LLC | Department...

    Energy Savers [EERE]

    Consent Order issued to Brookhaven Science Associates, LLC relating to an electrical shock event that occurred at the Brookhaven National Laboratory. On November 23,...

  7. Annova LNG, LLC- 14-004-CIC

    Office of Energy Efficiency and Renewable Energy (EERE)

    Application of Annova LNG, LLC to Transfer Control of Long-term Authorization to Export LNG to Free Trade Agreement Nations and Request for Expedited Treatment.

  8. Honeywell FM&T, LLC Contract No. ...

    National Nuclear Security Administration (NNSA)

    J APPENDIX B PERFORMANCE EVALUATION PLAN 09302011 Intentionally left blank for Internet posting purposes. Honeywell FM&T, LLC Contract No. DE-NA0000622 Attachment to...

  9. Design considerations for an automotive magnetorheological brake Kerem Karakoc, Edward J. Park *, Afzal Suleman

    E-Print Network [OSTI]

    Park, Edward

    Design considerations for an automotive magnetorheological brake Kerem Karakoc, Edward J. Park *, Afzal Suleman Department of Mechanical Engineering, University of Victoria, P.O. Box 3055, STN CSC February 2008 Available online xxxx Keywords: Mechatronic design Magnetorheological fluid Automotive brake

  10. U.S. Department of Energy and the Automotive X PRIZE Foundation...

    Office of Environmental Management (EM)

    the Automotive X PRIZE Foundation to Promote Clean, Energy-Efficient Vehicles U.S. Department of Energy and the Automotive X PRIZE Foundation to Promote Clean, Energy-Efficient...

  11. A New SiC-based DPF for the Automotive Industry | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A New SiC-based DPF for the Automotive Industry A New SiC-based DPF for the Automotive Industry Evaluation and example of performance of a new SiC-based diesel particulate filter...

  12. Strategies for Burr Minimization and Cleanability in Aerospace and Automotive Manufacturing

    E-Print Network [OSTI]

    Ávila, Miguel C.; Gardner, Joel D.; Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

    2006-01-01

    platform to scholars worldwide. 05AMT-17 Strategies for Burr Minimization and Cleanability in Aerospace and Automotive

  13. Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2008 Update Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for Automotive Applications: 2008 Update This report estimates fuel cell system cost for systems...

  14. Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2007 Update Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for Automotive Applications: 2007 Update This report estimates fuel cell system cost for systems...

  15. Superquadrics based 3D object representation of automotive parts utilizing part decomposition

    E-Print Network [OSTI]

    Abidi, Mongi A.

    Superquadrics based 3D object representation of automotive parts utilizing part decomposition Yan representation strategy for automotive parts in this paper. Starting from a 3D watertight surface model, a part, in our case automotive parts , efficiently into meaningful single parts. And our proposed superquadric

  16. Multi-source software on multicore automotive ECUs -Combining runnable sequencing with task

    E-Print Network [OSTI]

    Navet, Nicolas

    Multi-source software on multicore automotive ECUs - Combining runnable sequencing with task for computing power is quickly increasing in the automotive domain, car manu- facturers and tier-one suppliers requirements such as the ISO 26262 and the implementation of other automotive use-cases. These new features

  17. A novel taxonomy for gestural interaction techniques: considerations for automotive environments

    E-Print Network [OSTI]

    A novel taxonomy for gestural interaction techniques: considerations for automotive environments to analyze the applicability of these techniques on automotive environment. The taxon- omy plots a gestural into automotive environment rise the necessity to analyze gestural interaction technique from their cognitive load

  18. Computer Aided Design of Automotive Finishes Gary Meyer and Clement Shimizu

    E-Print Network [OSTI]

    Minnesota, University of

    Computer Aided Design of Automotive Finishes Gary Meyer and Clement Shimizu Department of Computer The principles of computer aided design were applied to the creation of new automotive finishes. A computer of an automotive paint and visualize the appearance of that paint on a three dimensional surface. The program gives

  19. Robotic Tracking and Marking of Surface Shape Defects on Moving Automotive Panels

    E-Print Network [OSTI]

    Payeur, Pierre

    Robotic Tracking and Marking of Surface Shape Defects on Moving Automotive Panels Valentin Borsu defects for quality control in the automotive industry. In order to integrate a defects detection station. INTRODUCTION Quality control in the automotive industry is essential in order to ensure that the products meet

  20. Journal of Embedded Computing 2 (2006) 93102 93 Frame packing algorithms for automotive

    E-Print Network [OSTI]

    Navet, Nicolas

    2006-01-01

    Journal of Embedded Computing 2 (2006) 93­102 93 IOS Press Frame packing algorithms for automotive Vandoeuvre-l `es-Nancy, France Abstract. The set of frames exchanged in automotive applications must meet two proposes algorithms for building off-line the set of frames in automotive communica- tions with the two

  1. Comparison of Global Optimization Methods for Drag Reduction in the Automotive Industry

    E-Print Network [OSTI]

    Dumas, Laurent

    Comparison of Global Optimization Methods for Drag Reduction in the Automotive Industry Laurent reduction problems in the automotive industry. All the methods consist in improving classical genetic of a GA is reduced by a factor up to 7. 1 Introduction The topic of drag reduction in the automotive

  2. Unreliable Data Transmissions and Limited Hardware Communication Buffers in Automotive E/E Virtual Prototypes

    E-Print Network [OSTI]

    Teich, Jürgen

    Unreliable Data Transmissions and Limited Hardware Communication Buffers in Automotive E/E Virtual automotive E/E architectures requires a thorough sys- tem evaluation already in early design phases. This can validation. A case-study from the automotive infotainment domain highlights the benefit that results from

  3. Multi-source and multicore automotive ECUs -OS protection mechanisms and scheduling

    E-Print Network [OSTI]

    Navet, Nicolas

    Multi-source and multicore automotive ECUs - OS protection mechanisms and scheduling Nicolas Navet,{firstname.name}@realtimeatwork.com Abstract--As the demand for computing power is quickly increasing in the automotive domain, car the respect of the safety requirements such as the ISO 26262 and the implementation of other automotive use

  4. Features Extraction from Point Clouds for Automated Detection of Deformations on Automotive Body Parts

    E-Print Network [OSTI]

    Payeur, Pierre

    Features Extraction from Point Clouds for Automated Detection of Deformations on Automotive Body with the problem of detecting unwanted deformations on automotive body part in mind, where feature line detection, surface map analysis, deformation detection, pattern recognition, quality control, automotive body parts

  5. "Hands Busy, Eyes Busy": Generating Stories from Sensor Data for Automotive applications

    E-Print Network [OSTI]

    Reiter, Ehud

    "Hands Busy, Eyes Busy": Generating Stories from Sensor Data for Automotive applications Joe to support "hands busy, eyes busy" automotive applications. It outlines a hierarchy of complexity of output, eyes busy" automotive ap- plications. Of particular interest is a review of how technolo- gies

  6. Parallel Constraint Handling in a Multiobjective Evolutionary Algorithm for the Automotive

    E-Print Network [OSTI]

    Montgomery, James

    Parallel Constraint Handling in a Multiobjective Evolutionary Algorithm for the Automotive through parallelisation only after increasing the complexity of the problem. Index Terms--Automotive The automotive industry takes advantage of mass production by fitting vehicles of the same type or series

  7. Industrial motivation for interactive shape modeling: a case study in conceptual automotive design

    E-Print Network [OSTI]

    Toronto, University of

    Industrial motivation for interactive shape modeling: a case study in conceptual automotive design illus- trated within the space of conceptual automotive design. Automo- tive design provides a unique but automotive designers almost exclusively work with sketches, clay and other traditional media. Design

  8. Model-based Control of Automotive Engines and After-treatment Devices

    E-Print Network [OSTI]

    Model-based Control of Automotive Engines and After-treatment Devices N. Petit MINES Paris on automotive vehicle emissions have steadily increased over the last decades, embedded control technology relating to the field of automotive engines. It exposes several milestones that have been identified

  9. Haptic Models of an Automotive Turn-Signal Switch: Identification and Playback Results

    E-Print Network [OSTI]

    Hollerbach, John M.

    Haptic Models of an Automotive Turn-Signal Switch: Identification and Playback Results Mark B of virtual environments. This paper addresses the problem of modeling the feel of an automotive turn- signal would require accurate models of the primary automotive controls, including the steering wheel, gear

  10. Date: 30 Octobre 2014........ PAGE 1 OF 2 CONFIDENTIEL CONTINENTAL Automotive S.A.

    E-Print Network [OSTI]

    Tourneret, Jean-Yves

    Date: 30 Octobre 2014........ PAGE 1 OF 2 CONFIDENTIEL CONTINENTAL Automotive S.A. Proposition de 2015 Rémunération : 800 par mois (montant brut mensuel) Lieu: Continental Automotive France, 1 avenue.daurenjou@continental-corporation.com #12;Date: 30 Octobre 2014........ PAGE 2 OF 2 CONFIDENTIEL CONTINENTAL Automotive S.A. Internship

  11. AutoMoDe Notations, Methods, and Tools for Model-Based Development of Automotive Software

    E-Print Network [OSTI]

    Braun, Peter

    05AE-268 AutoMoDe ­ Notations, Methods, and Tools for Model-Based Development of Automotive describes the first results from the AutoMoDe project (Automotive Model-based Development), where an integrated methodology for model-based development of automotive control software is being developed

  12. AutoPlug: An Open Experimental Platform for Automotive ECU Testing, Updates and Verification

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    AutoPlug: An Open Experimental Platform for Automotive ECU Testing, Updates and Verification Rahul In 2010, over 20.3 million vehicles were recalled. Software issues related to automotive controls to evaluate automotive controls in a realistic and open setting. We have developed AutoPlug, an automo- tive

  13. AUTOMOTIVE POWERTRAIN CONTROL A SURVEY Jeffrey A. Cook, Jing Sun, Julia H. Buckland, Ilya V. Kolmanovsky,

    E-Print Network [OSTI]

    Peng, Huei

    AUTOMOTIVE POWERTRAIN CONTROL A SURVEY Jeffrey A. Cook, Jing Sun, Julia H. Buckland, Ilya V, Michigan, 48109, U.S.A. (e-mail: jingsun@umich.edu). AUTOMOTIVE POWERTRAIN CONTROL A SURVEY Jeffrey A This paper surveys recent and historical publications on automotive powertrain control. Control

  14. Marketing Plan for Orbund, LLC

    E-Print Network [OSTI]

    Brata, Shome S.

    2008-12-19

    and get feedback from them. #0;? Decide on a pricing strategy for greater marketing push later. Orbund, LLC - Marketing Plan 10/27/2008 8 In 2003-2004, there were over 80...- 02 school years. This was an increase of more than 11 percent over the 84,578 schools reported in the fall of 1991. Also there were 97,382 operating public Elementary/Secondary schools in the 2005-06 school years. This was an increase of about 5...

  15. Fortistar LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban TransportFortistar LLC Jump to: navigation, search Name: Fortistar

  16. Mountain Goat Software, LLC Una Introduccin a

    E-Print Network [OSTI]

    Cabalar, Pedro

    Mountain Goat Software, LLC Una Introducción a Scrum Mike Cohen Traducido: Ernesto Grafeuille Revisado y modificado: Pedro Cabalar Noviembre 2013 #12;Mountain Goat Software, LLC Estamos perdiendo la hacia atrás -pueden servir mejor a los actuales requisitos competitivos". #12;Mountain Goat Software

  17. DOE Automotive Composite Materials Research: Present and Future Efforts

    SciTech Connect (OSTI)

    Warren, C.D.

    1999-08-10

    One method of increasing automotive energy efficiency is through mass reduction of structural components by the incorporation of composite materials. Significant use of glass reinforced polymers as structural components could yield a 20--30% reduction in vehicle weight while the use of carbon fiber reinforced materials could yield a 40--60% reduction in mass. Specific areas of research for lightweighting automotive components are listed, along with research needs for each of these categories: (1) low mass metals; (2) polymer composites; and (3) ceramic materials.

  18. ENSC 461 PROJECT: Next generation air conditioning systems for vehicles Assigned date: Feb. 21, 2011 Due date: April 11, 2011

    E-Print Network [OSTI]

    Bahrami, Majid

    air conditioning systems used in the automotive industry are based on vapour-compression refrigeration major challenge facing the automotive industry. Currently, R-134a is being used, almost in all vehicles. Perform a literature review and describe the state-of-the-art for A/C in automotive industry, for both

  19. Automotive Research Center A U.S. Army RDECOM Center of Excellence for Modeling and Simulation of Ground

    E-Print Network [OSTI]

    Papalambros, Panos

    Automotive Research Center A U.S. Army RDECOM Center of Excellence for Modeling and Simulation by the Automotive Research Center Sponsored by U.S. Army Research, Development and Engineering Command (RDECOM) U.S. Army Tank Automotive Research, Development and Engineering Center (TARDEC) National Automotive Center

  20. Gateway Ethanol LLC formerly Wildcat Bio Energy LLC | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdistoWhiskeyFootprintGEXA Corp.Information Ethanol LLC formerly

  1. Greensleeves LLC Greensleeves Technology

    E-Print Network [OSTI]

    ... · Building and HVAC design · Thermal energy storage at the HVAC system level ­Reuse heat that you've paid in design · It's a question of design and risk management Confiden.al and Proprietary 4 #12 amounts of energy (like a "flux capacitor") giving us a thermal flywheel effect · GeoHP Systems can "time

  2. Development of Sensors for Automotive PEM-based Fuel Cells

    E-Print Network [OSTI]

    environments ­Path to low cost (sensor) at 500k qty ­Develop test rig for sensor evaluation · Program Evaluation ­ UTRC Benchmark Sensor Test ­ IIT Sensor Test & Refinement ­ UTRC Program Lead And Evaluation UTCDevelopment of Sensors for Automotive PEM-based Fuel Cells DOE Agreement DE-FC04-02AL67616 Brian

  3. The Progressive Insurance Automotive X PRIZE Education Program

    SciTech Connect (OSTI)

    Robyn Ready

    2011-12-31

    The Progressive Insurance Automotive X PRIZE Education Program conducted education and outreach activities and used the competition's technical goals and vehicle demonstrations as a means of attracting students and the public to learn more about advanced vehicle technologies, energy efficiency, climate change, alternative fuels, and the science and math behind efficient vehicle development. The Progressive Insurance Automotive X PRIZE Education Program comprised three integrated components that were designed to educate the general public and create a multi-tiered initiative to engage students and showcase the 21st century skills students will need to compete in our global economy: teamwork, creativity, strong literacy, math and science skills, and innovative thinking. The elements included an Online Experience, a National Student Contest, and in person education events and activites. The project leveraged online connections, strategic partnerships, in-classroom, and beyond-the-classroom initiatives, as well as mainstream media. This education program supported by the U.S. Department of Energy (DOE) also funded the specification of vehicle telemetry and the full development and operation of an interactive online experience that allowed internet users to follow the Progressive Insurance Automotive X PRIZE vehicles as they performed in real-time during the Progressive Insurance Automotive X PRIZE competition events.

  4. 10 Questions for an Automotive Engineer: Thomas Wallner

    Broader source: Energy.gov [DOE]

    Meet Thomas Wallner – automotive engineer extraordinaire, who hails from Argonne National Laboratory’s Center for Transportation Research. He took some time to answer our 10 Questions and share his insight on advanced engine technologies from dual-fuel to biofuels.

  5. Automotive Travel Education Employment House & Home Real Estate TV Listings Marathon Golf Yellow News Weather Sports Health Money Tech Recipes Entertainment Traffic NBC 4

    E-Print Network [OSTI]

    Southern California, University of

    's research will emphasize threats to electrical power plants, transportation and telecommunication systemsSearch Automotive Travel Education Employment House & Home Real Estate TV Listings Marathon Golf November 25, 2003 LOS ANGELES -- The University of Southern California will serve as a key national center

  6. Automotive Stirling engine Mod I design-review report. Volume II

    SciTech Connect (OSTI)

    Not Available

    1982-08-01

    Volume No. 2 of the Automotive Stirling Engine Mod I Design Review Report contains descriptions of the operating principles, performance requirements and design details of the auxiliaries and control systems for the MOD I Stirling engine system. These components and sub-systems have the following main functions: provide the required fuel and air flows for a well controlled combustion process, generating heat to the Stirling cycle; provide a driver acceptable method for controlling the power output of the engine; provide adequate lubrication and cooling water circulation; generate the electric energy required for engine and vehicle operation; provide a driver acceptable method for starting, stopping and monitoring the engine; and provide a guard system, that protects the engine at component or system malfunction.

  7. Wader LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-EnhancingEt Al.,Turin,Village of Wellington,FL97-11WabaunseeSchott SolarWader LLC Jump

  8. TIAX LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-Enhancing CapacityVectren)Model forTechnologies95Symerton,E CTEP AsiaTIAX LLC Jump to:

  9. Hythane LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas: Energy Resources JumpNewTexas:Hydrothermally Deposited RockLLC Jump to: navigation,

  10. IBIS LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas: Energy Resources JumpNewTexas:Hydrothermally Deposited RockLLC44 -ofIBH GmbH

  11. HCE LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainableGlynn County,SolarFERCInformation 3.1 - Amendments to6E -ScanHCE LLC

  12. Gentivity, LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable UrbanKentucky: EnergyGateway EditOpen EnergyNewGenoa, Ohio:Gentivity, LLC

  13. Fibrowatt LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, AlabamaETEC GmbHFarinello Geothermal PowerGuidelinesFerrisburgh,Fertile,Fibrowatt LLC

  14. OPC LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland:NPI VenturesNewSt. Louis, Minnesota:Nulato,Nyack, NewAgreement |AEnergyOPC LLC

  15. Magwind LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OFAMERICA'SHeavyAgency (IRENA) JumpLiterature Review HomeM-7MHKMaglevMagwind LLC

  16. Pleotint LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc Jump to:Newberg,Energy LLC JumpPhono Solar

  17. Renewafuel LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EIS Report UrlNM-bRenewable Energy RFPsLtd RESRenewablesRenewafuel LLC

  18. Smallfoot, LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EIS ReportEurope GmbH JumpSlough Heat and PowerSmallfoot, LLC Jump to:

  19. Solarbuzz LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EIS ReportEurope GmbH JumpSloughInfraSolarSkies JumpSolarbuzz LLC Jump

  20. Solenergis LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EIS ReportEurope GmbH JumpSloughInfraSolarSkiesSolarpraxisSolenergis LLC

  1. BSST LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EAandAmminex AAustriaBiofuels Brasil Jump to: navigation,BROAD USABSST LLC

  2. Evatran LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdisto Electric Coop,Erosion Flume JumpInformationAGRiverEvatran LLC

  3. Natsource LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII Jump to: navigation,National Marine Fisheries Service JumpTechnologyGravesLLC

  4. Modeling and Optimization of PEMFC Systems and its Application to Direct Hydrogen Fuel Cell Vehicles

    E-Print Network [OSTI]

    Zhao, Hengbing; Burke, Andy

    2008-01-01

    for fuel cell systems for vehicle applications, Journal ofuse in fuel cell vehicles and other applications has beenin automotive applications, the fuel cell systems has to be

  5. DOE Fuel Cell Technologies Office Record 14012: Fuel Cell System...

    Broader source: Energy.gov (indexed) [DOE]

    the cost of automotive polymer electrolyte membrane (PEM) fuel cell systems. DOE Hydrogen and Fuel Cells Program Record 14012 More Documents & Publications DOE Fuel Cell...

  6. Self Healing Coatings | Polymer Coatings | Automotive Paints | Hea... http://living.oneindia.in/automobiles/auto-news/2008/polymer-coati... 1 of 2 2/6/09 10:29 AM

    E-Print Network [OSTI]

    Braun, Paul

    Self Healing Coatings | Polymer Coatings | Automotive Paints | Hea... http Ring #12;Self Healing Coatings | Polymer Coatings | Automotive Paints | Hea... http.gtglass.com Automotive Paints Guaranteed Color Match. Brush or Spray. In Stock Now. Order Today! www.Automotive

  7. EA-1784: Fotowatio Nevada Solar, LLC's Apex Solar Power Project...

    Office of Environmental Management (EM)

    84: Fotowatio Nevada Solar, LLC's Apex Solar Power Project in Clark County, NV EA-1784: Fotowatio Nevada Solar, LLC's Apex Solar Power Project in Clark County, NV July 1, 2010...

  8. DOE Cites UChicago Argonne, LLC for Worker Safety and Health...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cites UChicago Argonne, LLC for Worker Safety and Health Violations DOE Cites UChicago Argonne, LLC for Worker Safety and Health Violations April 30, 2009 - 12:00am Addthis The...

  9. Automotive Thermoelectric Generator (TEG) Controls | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based Fuels Research atDepartmentAuditsDepartment of(TEG) Controls Automotive

  10. Fourth annual report to Congress on the Automotive Technology Development Program

    SciTech Connect (OSTI)

    Not Available

    1983-11-01

    Program implementation and management are described. The status of conventional power-train technology is described with respect to uniform charge reciprocating Otto engine, stratified charge reciprocating Otto engine, rotary Otto engine, diesel engine, and transmissions. The three tasks of the Automotive Technology Development Program are discussed as follows; automotive gas turbine project, automotive Stirling engine development project, and the heavy duty transport technology project.

  11. DOE Provides $4.7 Million to Support Excellence in Automotive...

    Office of Environmental Management (EM)

    Technology Education (GATE) Centers of Excellence. The goal of GATE is to train a future workforce of automotive engineering professionals to overcome technology barriers...

  12. Development of Cell/Pack Level Models for Automotive Li-Ion Batteries...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    with Experimental Validation Development of CellPack Level Models for Automotive Li-Ion Batteries with Experimental Validation 2012 DOE Hydrogen and Fuel Cells Program and...

  13. Vehicle Technologies Office Merit Review 2014: Automotive Low Temperature Gasoline Combustion Engine Research

    Broader source: Energy.gov [DOE]

    Presentation given by Sandia National Laboratories at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about automotive low...

  14. Vehicle Technologies Office Merit Review 2015: Automotive Low Temperature Gasoline Combustion Engine Research

    Broader source: Energy.gov [DOE]

    Presentation given by Sandia National Laboratories at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about automotive low...

  15. Strategies for Burr Minimization and Cleanability in Aerospace and Automotive Manufacturing

    E-Print Network [OSTI]

    Ávila, Miguel C.; Gardner, Joel D.; Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

    2006-01-01

    Trans. North American Manufacturing Research Institute ,Laboratory for Manufacturing and Sustainability UC BerkeleyAerospace and Automotive Manufacturing Author: Avila, Miguel

  16. Pushing America's Automotive Industry Forward | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and support innovation -- including advanced manufacturing technologies, like 3D printing -- and sustainable transportation systems. In fact, our Oak Ridge National...

  17. Towards Automotive Software Health Management , Galois, Inc.

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    Integrated Vehicle Health Management (IVHM) in aviation and space systems broadly covers tools and techniques behavior" [4]. Such systems can lower maintenance costs as well as improve safety. An example herein was supported in part by the NASA Aviation Safety Program under Contract #NNL08AD13T. Email

  18. Graduate Automotive Technology Education (GATE) Program: Center of Automotive Technology Excellence in Advanced Hybrid Vehicle Technology at West Virginia University

    SciTech Connect (OSTI)

    Nigle N. Clark

    2006-12-31

    This report summarizes the technical and educational achievements of the Graduate Automotive Technology Education (GATE) Center at West Virginia University (WVU), which was created to emphasize Advanced Hybrid Vehicle Technology. The Center has supported the graduate studies of 17 students in the Department of Mechanical and Aerospace Engineering and the Lane Department of Computer Science and Electrical Engineering. These students have addressed topics such as hybrid modeling, construction of a hybrid sport utility vehicle (in conjunction with the FutureTruck program), a MEMS-based sensor, on-board data acquisition for hybrid design optimization, linear engine design and engine emissions. Courses have been developed in Hybrid Vehicle Design, Mobile Source Powerplants, Advanced Vehicle Propulsion, Power Electronics for Automotive Applications and Sensors for Automotive Applications, and have been responsible for 396 hours of graduate student coursework. The GATE program also enhanced the WVU participation in the U.S. Department of Energy Student Design Competitions, in particular FutureTruck and Challenge X. The GATE support for hybrid vehicle technology enhanced understanding of hybrid vehicle design and testing at WVU and encouraged the development of a research agenda in heavy-duty hybrid vehicles. As a result, WVU has now completed three programs in hybrid transit bus emissions characterization, and WVU faculty are leading the Transportation Research Board effort to define life cycle costs for hybrid transit buses. Research and enrollment records show that approximately 100 graduate students have benefited substantially from the hybrid vehicle GATE program at WVU.

  19. Development of a Hybrid Compressor/Expander Module for Automotive Fuel Cell Applications

    SciTech Connect (OSTI)

    McTaggart, Paul

    2004-12-31

    In this program TIAX LLC conducted the development of an advanced technology compressor/expander for supplying compressed air to Proton Exchange Membrane (PEM) fuel cells in transportation applications. The overall objective of this program was to develop a hybrid compressor/expander module, based on both scroll and high-speed turbomachinery technologies, which will combine the strengths of each technology to create a concept with superior performance at minimal size and cost. The resulting system was expected to have efficiency and pressure delivery capability comparable to that of a scroll-only machine, at significantly reduced system size and weight when compared to scroll-only designs. Based on the results of detailed designs and analyses of the critical system elements, the Hybrid Compressor/Expander Module concept was projected to deliver significant improvements in weight, volume and manufacturing cost relative to previous generation systems.

  20. Argonne National Laboratory is a U.S. Department of Energy laboratory managed by UChicago Argonne, LLC

    E-Print Network [OSTI]

    Kemner, Ken

    of Generation IV systems under the auspices of the Generation IV International Forum (GIF). Recent fuel cycle with thermal reactor systems for sustainable generation of electricity and other energy products (e, LLC Nuclear Engineering Generation IV Program Generation IV nuclear energy systems target significant

  1. Department of Energy Offers Severstal Dearborn, LLC a $730 Million...

    Broader source: Energy.gov (indexed) [DOE]

    manufacture, and construction of new facilities to produce the next generation of automotive advanced high strength steel (AHSS). The Severstal project has the potential to...

  2. FOA for the Demonstration of an Integrated Biorefinery System...

    Energy Savers [EERE]

    Demonstration of an Integrated Biorefinery System: Abengoa Bioenergy Biomass of Kansas, LLC FOA for the Demonstration of an Integrated Biorefinery System: Blue Fire Ethanol, Inc...

  3. Investigation of greenhouse gas reduction strategies by industries : an enterprise systems architecting approach

    E-Print Network [OSTI]

    Tanthullu Athmaram, Kumaresh Babu

    2012-01-01

    This thesis explores an enterprise systems architecting approach to investigate the greenhouse gas reduction strategies followed by industries, especially for automotive industry and Information Technology industry. The ...

  4. Optimization of Fuel Cell System Operating Conditions for Fuel Cell Vehicles

    E-Print Network [OSTI]

    Zhao, Hengbing; Burke, Andy

    2008-01-01

    An Indirect Methanol Pem Fuel Cell System, SAE 2001, (paperof automotive PEM fuel cell stacks, SAE 2000 (paper numberParasitic Loads in Fuel Cell Vehicles, International Journal

  5. Fact #868: April 13, 2015 Automotive Technology Has Improved Performance and Fuel Economy of New Light Vehicles – Dataset

    Broader source: Energy.gov [DOE]

    Excel file and dataset for Automotive Technology Has Improved Performance and Fuel Economy of New Light Vehicles

  6. The future of automotive lithium-ion battery recycling: Charting a sustainable course

    SciTech Connect (OSTI)

    Gaines, Linda

    2014-12-01

    This paper looks ahead, beyond the projected large-scale market penetration of vehicles containing advanced batteries, to the time when the spent batteries will be ready for final disposition. It describes a working system for recycling, using lead–acid battery recycling as a model. Recycling of automotive lithium-ion (Li-ion) batteries is more complicated and not yet established because few end-of-life batteries will need recycling for another decade. There is thus the opportunity now to obviate some of the technical, economic, and institutional roadblocks that might arise. The paper considers what actions can be started now to avoid the impediments to recycling and ensure that economical and sustainable options are available at the end of the batteries' useful life.

  7. Review of alternate automotive engine fuel economy. Final report January-October 78

    SciTech Connect (OSTI)

    Cole, D.; Bolt, J.A.; Huber, P.; Taylor, T. Jr.

    1980-11-01

    This study assessed the potential of alternate automotive engines to meet the fuel economy goals and emission levels of the 1980-1990 period. As part of NHTSA's continuing research in support of the Department of Transportation fuel economy activities, this study reviewed those developments offering viable substitutes for the current spark ignition engine systems. Categories assessed included stratified charge, diesels, turbo charging, rotary/Wankel engines, and the developmental gas turbine and Stirling cycle engines. Results of past and on-going research through 1978 were reviewed along with the development and production status of various alternate engine technologies proposed for automobiles and light trucks through the 1980s. Assessment was then made of the potential fuel economy improvement as a percentage of 1978 baseline data.

  8. The future of automotive lithium-ion battery recycling: Charting a sustainable course

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gaines, Linda

    2014-12-01

    This paper looks ahead, beyond the projected large-scale market penetration of vehicles containing advanced batteries, to the time when the spent batteries will be ready for final disposition. It describes a working system for recycling, using lead–acid battery recycling as a model. Recycling of automotive lithium-ion (Li-ion) batteries is more complicated and not yet established because few end-of-life batteries will need recycling for another decade. There is thus the opportunity now to obviate some of the technical, economic, and institutional roadblocks that might arise. The paper considers what actions can be started now to avoid the impediments to recycling andmore »ensure that economical and sustainable options are available at the end of the batteries' useful life.« less

  9. OPTIMIZATION OF AUTOMOTIVE VALVE TRAIN COMPONENTS WITH IMPLICT , O. J. ELSINGER

    E-Print Network [OSTI]

    OPTIMIZATION OF AUTOMOTIVE VALVE TRAIN COMPONENTS WITH IMPLICT FILTERING T. D. CHOI ¡ , O. J and optimization in automotive valve train design. We extend our previous work by using a more refined model to obtain optimal profiles for camshaft lobes. Key words. Noisy Optimization, Implicit Filtering, Mechanical

  10. Comprehensive Experimental Analyses of Automotive Attack Surfaces Stephen Checkoway, Damon McCoy, Brian Kantor,

    E-Print Network [OSTI]

    Hu, Fei

    Comprehensive Experimental Analyses of Automotive Attack Surfaces Stephen Checkoway, Damon Mc discover that remote exploitation is feasible via a broad range of attack vectors (including mechanics, we discuss the structural characteristics of the automotive ecosystem that give rise to such problems

  11. 2001-01-0308 FMEA-based Design for Remanufacture using Automotive-

    E-Print Network [OSTI]

    Shu, Lily H.

    2001-01-0308 FMEA-based Design for Remanufacture using Automotive- Remanufacturer Data A. Lam, M the development of a Failure Modes and Effects Analysis (FMEA) modified to support design for remanufacture. The results of the waste- stream analysis of an automotive remanufacturer were used for this FMEA

  12. Propulsion Materials FY 2002 Progress Report B. Rapid Surface Modifications of Aluminum Automotive Components for

    E-Print Network [OSTI]

    Pennycook, Steve

    , Tennessee Prime Contract No.: DE-AC05-00OR22725 Objectives · Further develop durability-enhancing coatings the time required to cure an epoxy used to join automotive body panels. · Develop a procedure for selective heat-treating of aluminum automotive body construction parts in order to soften selected areas to serve

  13. Cardiogram: Visual Analytics for Automotive Engineers Michael Sedlmair1, Petra Isenberg2, Dominikus Baur3, Michael Mauerer3,

    E-Print Network [OSTI]

    Isenberg, Petra

    Cardiogram: Visual Analytics for Automotive Engineers Michael Sedlmair1, Petra Isenberg2, Dominikus that sup- ports automotive engineers in debugging masses of traces each consisting of millions of recorded-critical networks to be error-free has become a major task and challenge for automotive engi- neers. To overcome

  14. 618 IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 19, NO. 3, MAY 2004 Automotive Power Generation and Control

    E-Print Network [OSTI]

    Perreault, Dave

    618 IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 19, NO. 3, MAY 2004 Automotive Power Generation developments in the application of power electronics to automotive power gener- ation and control. A new load be implemented within the existing manufacturing infrastructure. Index Terms--Automotive power generation, boost

  15. Abstract--EMI filters for automotive motor drives must achieve stringent EMI specifications while meeting tight cost

    E-Print Network [OSTI]

    Perreault, Dave

    1 Abstract-- EMI filters for automotive motor drives must achieve stringent EMI specifications of filter capacitors. The proposed approach is applied to an input filter for an automotive electro are becoming widely used in automotive applications due to their high performance and efficiency. One drawback

  16. Applications of Power Electronics in Automotive Power Generation David J. Perreault, Thomas A. Keim, Jeffrey H. Lang, Leandro M. Lorilla

    E-Print Network [OSTI]

    Perreault, Dave

    Applications of Power Electronics in Automotive Power Generation David J. Perreault, Thomas A. Keim Alternator, Brushless Exciter, Contactless Power Transfer. 1. Introduction The evolution of automotive these challenges has motivated a variety of research into automotive alternator design in recent years (e.g., [1

  17. Laser photothermal non-destructive inspection method for hairline crack detection in unsintered automotive parts: A statistical approach

    E-Print Network [OSTI]

    Mandelis, Andreas

    automotive parts: A statistical approach Jordan Tolev n , Andreas Mandelis Center for Advanced Diffusion-destructive quality and feedback control of the metal forming process of green automotive parts. & 2010 Elsevier Ltd. Automotive compo- nents such as sprockets, clutch plates, and other parts usually operate under high strain

  18. Automotive Research Center A U.S. Army RDECOM Center of Excellence for Modeling and Simulation of Ground

    E-Print Network [OSTI]

    Papalambros, Panos

    Automotive Research Center A U.S. Army RDECOM Center of Excellence for Modeling and Simulation Janet Lyons Organized by the Automotive Research Center Sponsored by U.S. Army Research, Development and Engineering Command (RDECOM) U.S. Army Tank Automotive Research, Development and Engineering Center (TARDEC

  19. Internalization of robust engineering methods in automotive product development : a study of corporate quality change in a large, mature automotive company

    E-Print Network [OSTI]

    Fallu, John W. (John William), 1966-

    2004-01-01

    It is broadly recognized in the automotive industry, as well as many others, that those organizations that can deliver timely new products or existing product upgrades at desired cost and quality targets will produce higher ...

  20. Automotive Deployment Option Projection Tool (ADOPT) Model

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram:Y-12Power, Inc | DepartmentPeer20Insulated Cladding Systems

  1. Power Modulation Investigation for High Temperature (175-200 degrees Celcius) Automotive Application

    SciTech Connect (OSTI)

    McCluskey, F. P.

    2007-04-30

    Hybrid electric vehicles were re-introduced in the late 1990s after a century dominated by purely internal combustion powered engines[1]. Automotive players, such as GM, Ford, DaimlerChrysler, Honda, and Toyota, together with major energy producers, such as BPAmoco, were the major force in the development of hybrid electric vehicles. Most notable was the development by Toyota of its Prius, which was launched in Japan in 1997 and worldwide in 2001. The shift to hybrids was driven by the fact that the sheer volume of vehicles on the road had begun to tax the ability of the environment to withstand the pollution of the internal combustion engine and the ability of the fossil fuel industry to produce a sufficient amount of refined gasoline. In addition, the number of vehicles was anticipated to rise exponentially with the increasing affluence of China and India. Over the last fifteen years, major advances have been made in all the technologies essential to hybrid vehicle success, including batteries, motors, power control and conditioning electronics, regenerative braking, and power sources, including fuel cells. Current hybrid electric vehicles are gasoline internal combustion--electric motor hybrids. These hybrid electric vehicles range from micro-hybrids, where a stop/start system cuts the engine while the vehicle is stopped, and mild hybrids where the stop/start system is supplemented by regenerative braking and power assist, to full hybrids where the combustion motor is optimized for electric power production, and there is full electric drive and full regenerative braking. PSA Peugeot Citroen estimates the increased energy efficiency will range from 3-6% for the micro-hybrids to 15-25% for the full hybrids.[2] Gasoline-electric hybrids are preferred in US because they permit long distance travel with low emissions and high gasoline mileage, while still using the existing refueling infrastructure. One of the most critical areas in which technology has been advancing has been the development of electronics that can operate in the high temperature environments present in hybrid vehicles. The temperatures under the hood for a gasoline-electric hybrid vehicle are comparable to those for traditional internal combustion engines. This is known to be a difficult environment with respect to commercial-grade electronics, as there are surface and ambient temperatures ranging from 125 C to 175 C. In addition, some hybrid drive electronics are placed in even harsher environments, such as on or near the brakes, where temperatures can reach 250 C. Furthermore, number of temperature cycles experienced by electronics in a hybrid vehicle is different from that experienced in a traditional vehicle. A traditional internal combustion vehicle will have the engine running for longer periods, whereas a mild or micro-hybrid engine will experience many more starts and stops.[3] This means that hybrid automotive electronics will undergo more cycles of a potential wider temperature cycle than standard automotive electronics, which in turn see temperature cycles of 2 to 3 times the magnitude of the {Delta}T = 50 C-75 C experienced by commercial-grade electronics. This study will discuss the effects of these harsh environments on the failure mechanisms and ultimate reliability of electronic systems developed for gasoline-electric hybrid vehicles. In addition, it will suggest technologies and components that can reasonably be expected to perform well in these environments. Finally, it will suggest areas where further research is needed or desirable. Areas for further research will be highlighted in bold, italic type. It should be noted that the first area where further research is desirable is in developing a clearer understanding of the actual hybrid automotive electronics environment and how to simulate it through accelerated testing, thus: Developing specific mission profiles and accelerated testing protocols for the underhood environment for hybrid cars, as has previously been done for gasoline-powered vehicles, is an important area for further st

  2. Reunion Power LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onRAPID/Geothermal/Exploration/ColoradoRemsenburg-Speonk, New York: EnergyOpen EnergyInformationforLLC Vermont JumpLLC

  3. Coral Power LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar EnergyLawler,CoalConcordiaConsumer ConnectionCoral Power LLC Place:Power LLC

  4. Boyd Station LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar Energy LLC JumpBiossence JumpJersey Logo: BostonStation LLC Jump to:

  5. Alliance Star Energy LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar Energy LLC Jump to: navigation, search Name: Alliance Star Energy LLC Place:

  6. Missouri Ethanol LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc Jump to: navigation,Mereg GmbH JumpLLC JumpMissouri Ethanol LLC Place:

  7. Our Energy LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc Jump to:Newberg,Energy LLC Jump to: navigation, search Name: Our Energy LLC

  8. Parallax Enterprises (NOLA) LLC- (Formerly Louisiana LNG Energy LLC) – FE Dkt. No. 14-19-LNG

    Broader source: Energy.gov [DOE]

    The Office of Fossil Energy gives notice of receipt of an application filed on February 5, 2014, by Louisiana LNG Energy LLC (LLNG) requesting long-term multi-contract authorization to export...

  9. Parallax Enterprises (NOLA) LLC (Formerly Louisiana LNG Energy LLC) – FE Dkt. No. 14-29-LNG

    Broader source: Energy.gov [DOE]

    The Office of Fossil Energy gives notice of receipt of an application filed on February 18, 2014, by Louisiana LNG Energy LLC (LLNG) requesting long-term authorization to export two million metric...

  10. Venture Global Calcasieu Pass, LLC- (Formerly Venture Global LNG, LLC)- 14-88-LNG

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Office of Fossil Energy gives notice of receipt of an application filed on May 13, 2014, by Venture Global LNG, LLC (VGP) requesting long-term, multi-contract authority to export (in addition...

  11. US Council for Automotive Research USCAR | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-EnhancingEt Al.,Turin, New York: EnergyU.S. EPA Regionfor AfricaCouncil for Automotive

  12. Analysis of the potential for new automotive uses of magnesium

    SciTech Connect (OSTI)

    Stodolsky, F.; Gaines, L.; Cuenca, R.; Wu, S.

    1994-12-31

    This paper describes the scope of a new project, just initiated, for the Lightweight Materials Program within the Office of Transportation Materials. The Center for Transportation Research and the Energy Technology Division at Argonne National Laboratory will assess the feasibility and technical potential of using magnesium and its alloys in place of steel or aluminum for automotive structural and sheet applications in order to enable more energy-efficient, lightweight passenger vehicles. The analysis will provide an information base to help guide magnesium research and development in the most promising directions.

  13. Society of Automotive Engineers World Congress | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OF APPLICABLE DIRECTIVES PursuantEnergy Small| AugustSociety of Automotive

  14. NSF Cyber-Physical Systems Workshop Position Paper An Automated Highway System as the Platform for Defining

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    1 NSF Cyber-Physical Systems Workshop Position Paper An Automated Highway System as the Platform for Defining Fault-Tolerant Automotive Architectures and Design Methods Steven E. Shladover, Sc.D. California. In the thirteen years since then, automotive technology has advanced significantly. The advent of hybrid electric

  15. SEMI-ANNUAL REPORTS FOR CHENIERE MARKETING, LLC AND CORPUS CHRISTI...

    Office of Environmental Management (EM)

    AND CORPUS CHRISTI LIQUEFACTION, LLC (NFTA) - FE DKT. NO. 12-97-LNG - ORDER 3638 SEMI-ANNUAL REPORTS FOR CHENIERE MARKETING, LLC AND CORPUS CHRISTI LIQUEFACTION, LLC (NFTA) - FE...

  16. SEMI-ANNUAL REPORTS FOR CHENIERE MARKETING, LLC AND CORPUS CHRISTI...

    Energy Savers [EERE]

    CHENIERE MARKETING, LLC AND CORPUS CHRISTI LIQUEFACTION, LLC (NFTA) - FE DKT. NO. 12-97-LNG - ORDER 3638 SEMI-ANNUAL REPORTS FOR CHENIERE MARKETING, LLC AND CORPUS CHRISTI...

  17. Benchmarks for Temporal Logic Requirements for Automotive Systems

    E-Print Network [OSTI]

    Fainekos, Georgios E.

    a trajectory that does not satisfy the specification 1 #12;gear_state 1 fourth entry: gear = 4; third entry: gear = 3; second entry: gear = 2; first entry: gear = 1; selection_state during: CALC_TH ; 2 steady(TWAIT,tick) [speed gear_state.DOWN } 1 after(TWAIT,tick) [speed >= up_th] {gear_state.UP } 1 [speed

  18. Case Study- Steam System Improvements at Dupont Automotive Marshall Laboratory 

    E-Print Network [OSTI]

    Larkin, A.

    2002-01-01

    and implement small scale cogeneration. These recommendations included reducing the medium pressure steam distribution to low pressure, eliminating the medium pressure to low pressure reducing stations, installing a back pressure steam turbine generator...

  19. GATE Center for Automotive Fuel Cell Systems at Virginia Tech

    Broader source: Energy.gov [DOE]

    Presentation from the U.S. DOE Office of Vehicle Technologies "Mega" Merit Review 2008 on February 25, 2008 in Bethesda, Maryland.

  20. Lio Energy Systems Coda Automotive Lishen Battery JV | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EAInvervarLeeds, UnitedLiberty PowerLine ExtensionLinnInformation

  1. Automotive and MHE Fuel Cell System Cost Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based Fuels Research atDepartmentAuditsDepartment of(TEG)of Energy1

  2. A Cross-Domain System Architecture for Embedded Hard Real-Time Many-Core Systems

    E-Print Network [OSTI]

    Ungerer, Theo

    -time applications from automotive, avionic, and construction machinery domains. The aim is to execute found their way into the automotive domain. Efforts are also being made to utilize multi-core systems on the same target platform. To support timing analyzability of the applications, the applications

  3. Final Report: Development of a Thermal and Water Management System for PEM Fuel Cell

    SciTech Connect (OSTI)

    Zia Mirza, Program Manager

    2011-12-06

    This final program report is prepared to provide the status of program activities performed over the period of 9 years to develop a thermal and water management (TWM) system for an 80-kW PEM fuel cell power system. The technical information and data collected during this period are presented in chronological order by each calendar year. Balance of plant (BOP) components of a PEM fuel cell automotive system represents a significant portion of total cost based on the 2008 study by TIAX LLC, Cambridge, MA. The objectives of this TWM program were two-fold. The first objective was to develop an advanced cooling system (efficient radiator) to meet the fuel cell cooling requirements. The heat generated by the fuel cell stack is a low-quality heat (small difference between fuel cell stack operating temperature and ambient air temperature) that needs to be dissipated to the ambient air. To minimize size, weight, and cost of the radiator, advanced fin configurations were evaluated. The second objective was to evaluate air humidification systems which can meet the fuel cell stack inlet air humidity requirements. The moisture from the fuel cell outlet air is transferred to inlet air, thus eliminating the need for an outside water source. Two types of humidification devices were down-selected: one based on membrane and the other based on rotating enthalpy wheel. The sub-scale units for both of these devices have been successfully tested by the suppliers. This project addresses System Thermal and Water Management.

  4. Transport of tetraethylammonium by a kidney cell line (LLC-PK sub 1 )

    SciTech Connect (OSTI)

    Fauth, C.; Rossier, B.; Roch-Ramel, F. )

    1988-03-01

    The authors investigated whether the LLC-PK{sub 1} epithelial cell lines (which shows many characteristics of proximal tubular cells) also is capable of transporting an organic ion. Suspended LLC-PK{sub 1} cells accumulated tetraethylammonium (TEA). The uptake showed characteristics of a facilitated mechanism; TEA uptake was saturable and temperature-dependent and was inhibited by other organic cations. Quinine and mepiperphenidol were the most potent inhibitors, whereas N{sup 1}-methylnicotinamide and morphine inhibited the transport system only slightly at doses of 10{sup {minus}3} M. Basolateral-to-apical TEA flux through LLC-PK{sub 1} monolayers was five to six times larger than that of mannitol, a nontransported compound, whereas apical-to-basolateral TEA and mannitol fluxes were equal. Only the basolateral-to-apical TEA flux was inhibited by quinine. Under similar experimental conditions, no transport of p-aminohippuric acid was observed. It is concluded that LLC-PK{sub 1} cells are able to transport TEA, as do cells of the proximal tubule.

  5. Future Automotive Aftertreatment Solutions: The 150°C Challenge Workshop Report

    SciTech Connect (OSTI)

    Zammit, Michael; DiMaggio, Craig L.; Kim, Chang H.; Lambert, Christine; Muntean, George G.; Peden, Charles HF; Parks, James E.; Howden, Ken

    2013-10-15

    With future fuel economy standards enacted, the U.S. automotive manufacturers (OEMs) are committed to pursuing a variety of high risk/highly efficient stoichiometric and lean combustion strategies to achieve superior performance. In recognition of this need, the U.S. Department of Energy (DOE) has partnered with domestic automotive manufacturers through U.S. DRIVE to develop these advanced technologies. However, before these advancements can be introduced into the U.S. market, they must also be able to meet increasingly stringent emissions requirements. A significant roadblock to this implementation is the inability of current catalyst and aftertreatment technologies to provide the required activity at the much lower exhaust temperatures that will accompany highly efficient combustion processes and powertrain strategies. Therefore, the goal of this workshop and report is to create a U.S. DRIVE emission control roadmap that will identify new materials and aftertreatment approaches that offer the potential for 90% conversion of emissions at low temperature (150°C) and are consistent with highly efficient combustion technologies currently under investigation within U.S. DRIVE Advanced Combustion and Emission Control (ACEC) programs.

  6. Direct Injection Compression Ignition Diesel Automotive Technology Education GATE Program

    SciTech Connect (OSTI)

    Anderson, Carl L

    2006-09-25

    The underlying goal of this prqject was to provide multi-disciplinary engineering training for graduate students in the area of internal combustion engines, specifically in direct injection compression ignition engines. The program was designed to educate highly qualified engineers and scientists that will seek to overcome teclmological barriers preventing the development and production of cost-effective high-efficiency vehicles for the U.S. market. Fu1iher, these highly qualified engineers and scientists will foster an educational process to train a future workforce of automotive engineering professionals who are knowledgeable about and have experience in developing and commercializing critical advanced automotive teclmologies. Eight objectives were defmed to accomplish this goal: 1. Develop an interdisciplinary internal co1nbustion engine curriculum emphasizing direct injected combustion ignited diesel engines. 2. Encourage and promote interdisciplinary interaction of the faculty. 3. Offer a Ph.D. degree in internal combustion engines based upon an interdisciplinary cuniculum. 4. Promote strong interaction with indusuy, develop a sense of responsibility with industry and pursue a self sustaining program. 5. Establish collaborative arrangements and network universities active in internal combustion engine study. 6. Further Enhance a First Class educational facility. 7. Establish 'off-campus' M.S. and Ph.D. engine programs of study at various indusuial sites. 8. Extend and Enhance the Graduate Experience.

  7. Freeport LNG Expansion, L.P. and FLNG Liquefaction, LLC - FE...

    Broader source: Energy.gov (indexed) [DOE]

    of Energy (DOEFE) issued Order No. 3357 (FLEX II Conditional Order) to Freeport LNG Expansion, L.P., FLNG Liquefaction, LLC, FLNG Liquefaction 2, LLC, and FLNG...

  8. Supercritical Recovery Systems LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-Enhancing CapacityVectren)Model for theSunLanSuperDrive Inc Jump

  9. Sustainable Systems LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-Enhancing CapacityVectren)Model forTechnologies Ltd Jump to:Power Partners Jump

  10. EDrive Systems LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (UtilityInstrumentsAreaforInformation ECr Technologies IncEDP

  11. Renewable Power Systems LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onRAPID/Geothermal/Exploration/ColoradoRemsenburg-Speonk, New York: Energy ResourcesProducts LLCProject Jump

  12. Resource Energy Systems LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onRAPID/Geothermal/Exploration/ColoradoRemsenburg-Speonk, New York: EnergyOpen EnergyInformation FishResolarEnergy

  13. Solstice Solar Systems LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-Enhancing Capacity forSiliciumEnergy Inc Jump to:SolergySolsil Inc Jump to:Solstice

  14. Nextronex Energy Systems LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland:NPI VenturesNew Hampshire: Energy Resources Jump to:Newville,FPL EnergyNextronex

  15. Renewegy Systems LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EIS Report UrlNM-bRenewable Energy RFPsLtd

  16. GATE Center of Excellence at UAB in Lightweight Materials for Automotive Applications

    SciTech Connect (OSTI)

    2011-07-31

    This report summarizes the accomplishments of the UAB GATE Center of Excellence in Lightweight Materials for Automotive Applications. The first Phase of the UAB DOE GATE center spanned the period 2005-2011. The UAB GATE goals coordinated with the overall goals of DOE's FreedomCAR and Vehicles Technologies initiative and DOE GATE program. The FCVT goals are: (1) Development and validation of advanced materials and manufacturing technologies to significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost; (2) To provide a new generation of engineers and scientists with knowledge and skills in advanced automotive technologies. The UAB GATE focused on both the FCVT and GATE goals in the following manner: (1) Train and produce graduates in lightweight automotive materials technologies; (2) Structure the engineering curricula to produce specialists in the automotive area; (3) Leverage automotive related industry in the State of Alabama; (4) Expose minority students to advanced technologies early in their career; (5) Develop innovative virtual classroom capabilities tied to real manufacturing operations; and (6) Integrate synergistic, multi-departmental activities to produce new product and manufacturing technologies for more damage tolerant, cost-effective, and lighter automotive structures.

  17. Automotive Energy Supply Corporation AESC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar Energy LLC Jump to:Greece: Energy ResourcesCooperativeEnergy

  18. Los Alamos National Security LLC Selected to Manage Los Alamos...

    Energy Savers [EERE]

    be the management and operations contractor for Los Alamos National Laboratory in New Mexico. Los Alamos National Security LLC is a limited liability corporation made up of...

  19. Employee Involvement Don King Washington Closure Hanford, LLC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hanford, LLC August 2012 The Next Step in Safety and Health 2012 National VPPPA Conference Protecting the Columbia River National VPPPA Conference - August 2012 E11040562 of...

  20. Energy Department Authorizes Alaska LNG Project, LLC to Export...

    Broader source: Energy.gov (indexed) [DOE]

    Department announced today that it has issued a conditional authorization for the Alaska LNG Project, LLC (Alaska LNG) to export domestically produced liquefied natural gas (LNG)...

  1. Project Reports for Cherokee Nation Businesses, LLC.- 2010 Project

    Office of Energy Efficiency and Renewable Energy (EERE)

    Cherokee Nation Businesses, LLC (CNB) will conduct pre-construction activities in support of the design and installation of a 127.5 MW wind farm.

  2. Operated by Los Alamos National Security, LLC for NNSA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hiro Sakai (JAEA) Hiroshi Yasuoka (JAEA) Luis Balicas (NHMFL) Operated by Los Alamos National Security, LLC for NNSA * 115 heavy fermion primer * Non-universality of dopants...

  3. NNSA selects Consolidated Nuclear Security, LLC to manage the...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    selects Consolidated ... NNSA selects Consolidated Nuclear Security, LLC to manage the consolidated contract for Nuclear Production Operations Posted: January 8, 2013 - 1:20pm In a...

  4. Department of Energy Cites Battelle Energy Alliance, LLC for...

    Energy Savers [EERE]

    for Classified Information Security Violations Department of Energy Cites Battelle Energy Alliance, LLC for Classified Information Security Violations February 25, 2011 - 12:00am...

  5. Argonne National Laboratory is a U.S. Department of Energy laboratory managed by UChicago Argonne, LLC.

    E-Print Network [OSTI]

    Kemner, Ken

    Argonne National Laboratory is a U.S. Department of Energy laboratory managed by UChicago Argonne, Argonne is developing a Remote Area Modular Monitoring (RAMM) system that would remain functional after, LLC. dis_RammBroch_072014rc Environmental Management safety · performance · cleanup · closure DOE

  6. Design and Evaluation of a 42 V Automotive Alternator with Integrated Switched-Mode Rectifier

    E-Print Network [OSTI]

    Perreault, Dave

    and permanent magnet alternators [10-19, 24-26]. This paper carries this strategy forward, and presents is an emerging need for automotive generators that can provide higher output power and power density, improved

  7. A design strategy applied to sulfur resistant lean NOx̳ automotive catalysts

    E-Print Network [OSTI]

    Tang, Hairong

    2005-01-01

    Catalyst poisoning due to sulfur compounds derived from fuel sulfur presents a major challenge, intractable thus far, to development of many advanced technologies for automotive catalysts such as the lean NOx, trap. Under ...

  8. Comparative analysis of automotive powertrain choices for the near to mid-term future

    E-Print Network [OSTI]

    Kasseris, Emmanuel P

    2006-01-01

    This thesis attempts a technological assessment of automotive powertrain technologies for the near to mid term future. The powertrain types to be assessed include naturally aspirated gasoline engines, turbocharged gasoline ...

  9. The impact of manufacturing offshore on technology development paths in the automotive and optoelectronics industries

    E-Print Network [OSTI]

    Fuchs, Erica R. H. (Erica Renee H.), 1977-

    2006-01-01

    This dissertation presents a two-case study of the impact of manufacturing offshore on the technology trajectory of the firm and the industry. It looks in particular at the automotive and optoelectronics industries. The ...

  10. Electrostatic coalescence of used automotive crankcase oil as an alternative to other separation processes 

    E-Print Network [OSTI]

    Dixon, John Leslie

    1998-01-01

    This thesis presents an initial investigation of using electrostatic coalescence as an alternative to conventional separation processes to purify used automotive crankcase oil. Specific emphasis of this study was the feasibility of this approach...

  11. Prediction and measurement of the rotordynamic response of an automotive turbocharger with floating ring bearings 

    E-Print Network [OSTI]

    Kerth, Jason Michael

    2003-01-01

    The present investigation advances a rotordynamic analysis of an automotive turbocharger with floating ring bearings. Each fluid film of the floating ring bearing is analyzed using a finite element model. The model includes the effects...

  12. Autopia's End: The Decline and Fall of Detroit's Automotive Manufacturing Landscape

    E-Print Network [OSTI]

    Ryan, Brent D.

    Since the 1980s, Detroit’s once- monumental building stock of historic automotive manufacturing facilities has mostly disappeared. Demolition, redevelopment, and abandonment have left little to mark the city’s twentieth-century ...

  13. Status and Outlook for the U.S. Non-Automotive Fuel Cell Industry...

    Office of Environmental Management (EM)

    Status and Outlook for the U.S. Non-Automotive Fuel Cell Industry: Impacts of Government Policies and Assessment of Future Opportunities Status and Outlook for the U.S....

  14. Management and Labor Relations Techniques of Japanese-Owned Automotive Assembly Plants in the United States

    E-Print Network [OSTI]

    Pitney, Paul

    2005-12-16

    This field project involves a study of the Japanese-owned automotive assembly plants, or “transplants,” in the United States and the management and labor-relations techniques that have made them successful. The management and labor...

  15. Advance Patent Waiver W(A)2013-011 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (DOE) has to inventions conceived or first actually reduced to practice by DELPHI AUTOMOTIVE SYSTEMS, LLC under agreement DE-EE0005752, as the DOE has determined that granting...

  16. Passivity-Based Design of Wireless Networked Control Systems for Robustness to Time-Varying Delays

    E-Print Network [OSTI]

    Antsaklis, Panos

    Antsaklis University of Notre Dame Abstract Real-life cyber-physical systems, such as automotive ve- hicles grand vision for real-world Cyber Physical Systems (CPSs). Real-world CPSs, such as automotive vehicles design flow. mizing performance. The selected design platform (abstrac- tions and tools used for control

  17. Towards Synthesis of Platform-aware Attack-Resilient Control Systems

    E-Print Network [OSTI]

    Pappas, George J.

    Towards Synthesis of Platform-aware Attack-Resilient Control Systems Extended Abstract Miroslav Over the past decade, the design process in the automotive indus- try has gone through a period, there is a current shift in vehicle architectures, from isolated control systems to more open automotive

  18. AutoMoDe - Model-Based Development of Automotive Software

    E-Print Network [OSTI]

    Ziegenbein, Dirk; Freund, Ulrich; Bauer, Andreas; Romberg, Jan; Schatz, Bernhard

    2011-01-01

    This paper describes first results from the AutoMoDe (Automotive Model-Based Development) project. The overall goal of the project is to develop an integrated methodology for model-based development of automotive control software, based on problem-specific design notations with an explicit formal foundation. Based on the existing AutoFOCUS framework, a tool prototype is being developed in order to illustrate and validate the key elements of our approach.

  19. Renewable NRG LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onRAPID/Geothermal/Exploration/ColoradoRemsenburg-Speonk, New York: Energy ResourcesProducts LLC

  20. Reunion Power LLC Vermont | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onRAPID/Geothermal/Exploration/ColoradoRemsenburg-Speonk, New York: EnergyOpen EnergyInformationforLLC Vermont Jump