Sample records for automatic daylight dimming

  1. Performance of Integrated Systems of Automated Roller Shade Systems and Daylight Responsive Dimming Systems

    E-Print Network [OSTI]

    Park, Byoung-Chul

    2011-01-01T23:59:59.000Z

    Roller Shade Systems and Daylight Responsive Dimming SystemsRoller Shade Systems and Daylight Responsive Dimming SystemsBerkeley, CA 94720 Abstract Daylight responsive dimming

  2. Daylighting, dimming, and the electricity crisis in California

    SciTech Connect (OSTI)

    Rubinstein, Francis; Neils, Danielle; Colak, Nesrin

    2001-09-17T23:59:59.000Z

    Dimming controls for electric lighting have been one of the mainstays of the effort to use daylighting to reduce annual lighting energy consumption. The coincidence of daylighting with electric utility peak demand makes daylighting controls an effective strategy for reducing commercial building peak electric loads. During times of energy shortage, there is a greatly increased need to reduce electricity use during peak periods, both to ease the burden on electricity providers and to control the operating costs of buildings. The paper presents a typical commercial building electric demand profile during summer, and shows how daylighting-linked lighting controls and load shedding techniques can reduce lighting at precisely those times when electricity is most expensive. We look at the importance of dimming for increasing the reliability of the electricity grid in California and other states, as well as examine the potential cost-effectiveness of widespread use of daylighting to save energy and reduce monthly electricity bills.

  3. Effective Daylighting: Evaluating Daylighting Performance in the San Francisco Federal Building from the Perspective of Building Occupants

    E-Print Network [OSTI]

    Konis, Kyle Stas

    2012-01-01T23:59:59.000Z

    of Task 21 / Annex 29, Daylight in Buildings. October, 1997.Energy performance of daylight-linked automatic lightingField Commissioning of a daylight-dimming lighting system.

  4. STATE OF CALIFORNIA AUTOMATIC DAYLIGHTING CONTROL ACCEPTANCE DOCUMENT

    E-Print Network [OSTI]

    STATE OF CALIFORNIA AUTOMATIC DAYLIGHTING CONTROL ACCEPTANCE DOCUMENT CEC-LTG-3A (Revised 07/10) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF ACCEPTANCE LTG-3A Automatic Daylighting Control Acceptance fraction of rated light output. #12;STATE OF CALIFORNIA AUTOMATIC DAYLIGHTING CONTROL ACCEPTANCE DOCUMENT

  5. Performance of Integrated Systems of Automated Roller Shade Systems and Daylight Responsive Dimming Systems

    SciTech Connect (OSTI)

    Park, Byoung-Chul; Choi, An-Seop; Jeong, Jae-Weon; Lee, Eleanor S.

    2010-07-08T23:59:59.000Z

    Daylight responsive dimming systems have been used in few buildings to date because they require improvements to improve reliability. The key underlying factor contributing to poor performance is the variability of the ratio of the photosensor signal to daylight workplane illuminance in accordance with sun position, sky condition, and fenestration condition. Therefore, this paper describes the integrated systems between automated roller shade systems and daylight responsive dimming systems with an improved closed-loop proportional control algorithm, and the relative performance of the integrated systems and single systems. The concept of the improved closed-loop proportional control algorithm for the integrated systems is to predict the varying correlation of photosensor signal to daylight workplane illuminance according to roller shade height and sky conditions for improvement of the system accuracy. In this study, the performance of the integrated systems with two improved closed-loop proportional control algorithms was compared with that of the current (modified) closed-loop proportional control algorithm. In the results, the average maintenance percentage and the average discrepancies of the target illuminance, as well as the average time under 90percent of target illuminance for the integrated systems significantly improved in comparison with the current closed-loop proportional control algorithm for daylight responsive dimming systems as a single system.

  6. 2003: Energy performance of daylight-linked automatic lighting control systems in large atrium spaces: report on two field-monitored case studies

    E-Print Network [OSTI]

    M. R. Galasiu; Morad R. Atif; Anca D. Galasiu

    This paper presents the field-measured energy performance of two common types of daylight-linked lighting control systems, continuous dimming and automatic on/off installed in two existing large atrium spaces located in Canada. The daylighting performance was evaluated based on the daylight contribution to the indoor illuminance and the amount of electrical lighting displaced by daylighting via the daylight-linked lighting control systems. Measured daylighting contribution to the space indicates that significant lighting energy savings can be achieved in atrium spaces if the daylight-linked lighting control system is appropriately selected, installed and commissioned throughout its existence. Results extrapolated from measurements collected during summer and winter indicate that as installed, the continuous dimming lighting control system provides 46% annual savings in electrical lighting consumption, while the automatic on/off saves between 11-17% in lighting energy. These savings account for 68% of the lighting energy consumed during main occupancy for the continuous dimming system, and 31.5% for the automatic on/off. Operation irregularities such as a reduced dimming linearity and an incorrect adjustment of the phases of the dimming control system, as well as the inadequate location of the photocell controlling the automatic on/off lighting system, the improper maintenance of the skylight during winter and the oversizing of the lighting system reduced the energy efficiency of the lighting control systems by 30-65%.

  7. Invited paper for the 2001 IESNA National Conference Daylighting, Dimming, and the Electricity Crisis in California

    E-Print Network [OSTI]

    building peak electric loads. During times of energy shortage, there is a greatly increased need to reduce the operating costs of buildings. The paper presents a typical commercial building electric demand profile during summer, and shows how daylighting-linked lighting controls and load shedding techniques can reduce

  8. The New York Times headquarters daylighting mockup: Monitored performance of the daylighting control system

    E-Print Network [OSTI]

    Lee, Eleanor S.; Selkowitz, Stephen E.

    2006-01-01T23:59:59.000Z

    1999. 揂nalysis of Daylight Responsive Dimming Systemglare and increase daylight, and 2) Area B had digitalthe stair to approximate the daylight contributions from the

  9. PERFORMANCE MODELING OF DAYLIGHT INTEGRATED PHOTOSENSOR- CONTROLLED LIGHTING SYSTEMS

    E-Print Network [OSTI]

    S. Jain; R. R. Creasey; J. Himmelspach; K. P. White; M. Fu; Richard G. Mistrick

    Some building energy codes now require the incorporation of daylight into buildings and automatic photosensor-controlled switching or dimming of the electric lighting system in areas that receive daylight. This paper describes enhancements to the open-source Daysim daylight analysis software that permit users to model a photosensor control system as it will perform in a real space, considering the directional sensitivity of the photosensor, its mounting position, the space and daylight aperture geometry, window shading configuration; the electric lighting equipment and control zones; exterior obstructions; and site weather conditions. System output includes assessment of the daylight distribution in a space throughout the year, the photosensor抯 ability to properly track the daylight and modify electric lighting system output, and the energy savings provided by the modeled control system. The application of daylight coefficients permits annual simulations to be conducted efficiently using hourly or finer weather data time increments. 1

  10. Effective Daylighting: Evaluating Daylighting Performance in the San Francisco Federal Building from the Perspective of Building Occupants

    E-Print Network [OSTI]

    Konis, Kyle Stas

    2011-01-01T23:59:59.000Z

    of Task 21 / Annex 29, Daylight in Buildings. October, 1997.Energy performance of daylight-linked automatic lightingBegemann, G. et al. (1997). Daylight, artificial light and

  11. The Lightswitch Wizard -- reliable daylight simulations

    E-Print Network [OSTI]

    For Initial Design; C. F. Morrison; M. Dubrous; C. F. Reinhart ?; M. Morrison; F. Dubrous

    A web-based, non-expert daylighting analysis tool has been developed to support daylighting-related design decisions in peripheral private offices during an early design stage (http://buildwiz.com). The tool offers a comparative, reliable, and fast analysis of the annual amount of daylight in the offices (daylight factor and daylight autonomy) and the lighting energy performance of automated lighting controls (occupancy sensors, photocells) compared to standard on/off switches. Blinds are either manually or automatically controlled.

  12. Combining daylighting, personal controls, and load shedding offers

    E-Print Network [OSTI]

    Combining daylighting, personal controls, and load shedding offers enormous potential for reducing lighting system to respond to available daylight and demand response control 路 Allows building occupants--Consider the improved cost-effectiveness of wireless dimming to promote daylighting controls and load- shedding

  13. Neural daylight control system

    E-Print Network [OSTI]

    Grif, Horatiu Stefan

    2010-01-01T23:59:59.000Z

    The paper describes the design, the implementation of a neural controller used in an automatic daylight control system. The automatic lighting control system (ALCS) attempt to maintain constant the illuminance at the desired level on working plane even if the daylight contribution is variable. Therefore, the daylight will represent the perturbation signal for the ALCS. The mathematical model of process is unknown. The applied structure of control need the inverse model of process. For this purpose it was used other artificial neural network (ANN) which identify the inverse model of process in an on-line manner. In fact, this ANN identify the inverse model of process + the perturbation signal. In this way the learning signal for neural controller has a better accuracy for the present application.

  14. The New York Times headquarters daylighting mockup: Monitoredperformance of the daylighting control system

    SciTech Connect (OSTI)

    Lee, Eleanor S.; Selkowitz, Stephen E.

    2006-02-24T23:59:59.000Z

    A nine-month monitored field study of the performance of automated roller shades and daylighting controls was conducted in a 401 m{sup 2} unoccupied, furnished daylighting mockup. The mockup mimicked the southwest corner of a new 110 km{sub 2} commercial building in New York, New York, where The New York Times will be the major tenant. This paper focuses on evaluating the performance of two daylighting control systems installed in separate areas of an open plan office with 1.2-m high workstation partitions: (1) Area A had 0-10 V dimmable ballasts with an open-loop proportional control system and an automated shade controlled to reduce window glare and increase daylight, and (2) Area B had digital addressable lighting interface (DALI) ballasts with a closed-loop integral reset control system and an automated shade controlled to block direct sun. Daylighting control system performance and lighting energy use were monitored. The daylighting control systems demonstrated very reliable performance after they were commissioned properly. Work plane illuminance levels were maintained above 90% of the maximum fluorescent illuminance level for 99.9{+-}0.5% and 97.9{+-}6.1% of the day on average over the monitored period, respectively, in Areas A and B. Daily lighting energy use savings were significant in both Areas over the equinox-to-equinox period compared to a non-daylit reference case. At 3.35 m from the window, 30% average savings were achieved with a sidelit west-facing condition in Area A while 50-60% were achieved with a bilateral daylit south-facing condition in Area B. At 4.57-9.14 m from the window, 5-10% and 25-40% savings were achieved in Areas A and B, respectively. Average savings for the 7-m deep dimming zone were 20-23% and 52-59% for Areas A and B, respectively, depending on the lighting schedule. The large savings and good reliability can be attributed to the automatic management of the interior shades. The DALI-based system exhibited faulty behavior that remains unexplained, but operational errors are expected to be resolved as DALI products reach full maturity. The building owner received very competitive bids ($30-75 US/DALI ballast) and was able to justify use of the daylighting control system based on operational cost savings and increased amenity. Additional energy savings due to reduced solar and lighting heat gains were not quantified but will add to the total operational cost savings.

  15. Daylighting Basics

    Broader source: Energy.gov [DOE]

    Daylighting is the use of windows and skylights to bring sunlight into buildings. Daylighting in businesses and commercial buildings can result in substantial savings on electric bills, and not only provides a higher quality of light but also improves productivity and health.

  16. THE DAYLIGHTING SOLUTION

    E-Print Network [OSTI]

    Selkowitz, Stephen

    2013-01-01T23:59:59.000Z

    of modulating sunlight and daylight. By intercepting directto the building owner. Daylight and sunlight have alwaysuse. While the use of daylight in homes is not seen as a

  17. Daylighting Calculation in DOE-2

    E-Print Network [OSTI]

    Winkelmann, F.C

    2013-01-01T23:59:59.000Z

    4 2.3 Daylight46 3.2.1 Exterior Daylight Availabilityof Interior Daylight Illuminance . . . . . . . . . . ..21

  18. MANDATORY MEASURES DAYLIGHTING

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES DAYLIGHTING Reference: Sub-Chapter 4, Section 130.1(d) #12;SECTION 4 Daylighting daylighting controls. 路 Lighting in daylit zones should have multi-level steps, per Table 130.1-A 路 Light levels provided at night should be available at all other times 路 When sufficient daylight is available

  19. MANDATORY MEASURES DAYLIGHTING

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES DAYLIGHTING Reference: Sub-Chapter 4, Section 130.1(d) #12;SECTION 5 Daylighting daylighting controls. 路 Lighting in daylit zones should have multi-level steps, per Table 130.1-A 路 Light levels provided at night should be available at all other times 路 When sufficient daylight is available

  20. DAYLIGHTING DIRECTORY 1/1980

    E-Print Network [OSTI]

    ,

    2012-01-01T23:59:59.000Z

    shell for passive heating or cooling and daylight. -To consider daylight as having a major contribution inStr. 'NARY PROVIDING A DAYLIGHT ANALYSIS SERVICE USING

  1. Daylight metrics and energy savings

    E-Print Network [OSTI]

    Mardaljevic, John

    2011-01-01T23:59:59.000Z

    lighting energy use under daylight linked lighting controls.simulation of annual daylight illumi- nance distributions 朼nd J. Mardaljevic. Useful daylight illuminances: A replace-

  2. Light and Energy -Daylight measurements

    E-Print Network [OSTI]

    Light and Energy - Daylight measurements #12;Light and Energy - Daylight measurements Authors: Jens;3 Title Light and Energy Subtitle Daylight measurements Authors Jens Christoffersen, 脕sta Logad贸ttir ........................................................................................................ 5 Daylight quantity

  3. MANDATORY MEASURES DAYLIGHTING

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES DAYLIGHTING Reference: Sub-Chapter 4, Section 130.1(d) #12;SECTION 4 MINIMUM DAYLIGHTING FOR LARGE SPACES Large enclosed spaces, such as large retail warehouses, are required to have a minimum amount of daylight available when using the prescriptive method of compliance. The minimum

  4. Lighting system combining daylight concentrators and an artificial source

    DOE Patents [OSTI]

    Bornstein, Jonathan G. (Miami, FL); Friedman, Peter S. (Toledo, OH)

    1985-01-01T23:59:59.000Z

    A combined lighting system for a building interior includes a stack of luminescent solar concentrators (LSC), an optical conduit made of preferably optical fibers for transmitting daylight from the LSC stack, a collimating lens set at an angle, a fixture for receiving the daylight at one end and for distributing the daylight as illumination inside the building, an artificial light source at the other end of the fixture for directing artifical light into the fixture for distribution as illumination inside the building, an automatic dimmer/brightener for the artificial light source, and a daylight sensor positioned near to the LSC stack for controlling the automatic dimmer/brightener in response to the daylight sensed. The system also has a reflector positioned behind the artificial light source and a fan for exhausting heated air out of the fixture during summer and for forcing heated air into the fixture for passage into the building interior during winter.

  5. Energy 101: Daylighting

    Office of Energy Efficiency and Renewable Energy (EERE)

    Daylighting梩he use of windows or skylights for natural lighting and temperature regulation梚s one building strategy that can save money for homeowners and businesses.

  6. Daylight in Guinea-Bissau

    E-Print Network [OSTI]

    Hall, Hiram

    1975-01-01T23:59:59.000Z

    MYLIGfi Iii GJU-BISSAU by HIRAM HALL daylightdaylight of dawning dextrose of my goad the rapidsdreams of~ soul. daylight daylight of my dawning may i wrap

  7. Energy 101: Daylighting

    SciTech Connect (OSTI)

    None

    2011-01-01T23:59:59.000Z

    Daylighting梩he use of windows or skylights for natural lighting and temperature regulation梚s one building strategy that can save money for homeowners and businesses. Highly efficient, strategically placed windows maximize the use of natural daylight in a building, lowering the need for artificial lighting without causing heating or cooling problems.

  8. Energy 101: Daylighting

    ScienceCinema (OSTI)

    None

    2013-05-29T23:59:59.000Z

    Daylighting?the use of windows or skylights for natural lighting and temperature regulation?is one building strategy that can save money for homeowners and businesses. Highly efficient, strategically placed windows maximize the use of natural daylight in a building, lowering the need for artificial lighting without causing heating or cooling problems.

  9. Lighting and Daylight Harvesting

    E-Print Network [OSTI]

    Bos, J.

    2011-01-01T23:59:59.000Z

    exposing us to the latest products and technologies. Daylight Harvesting A system of controlling the direction and the quantity of light both natural and artificial within a given space. This implies: Control of fenestration in terms of size..., transmission and direction. Control of reflected light within a space. Control of electric light in terms of delivery and amount Daylight harvesting systems are typically designed to maintain a minimum recommended light level. This light level...

  10. CALIFORNIA ENERGY Daylighting In Schools

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION Daylighting In Schools: Reanalysis Report TECHNICALREPORT October 2003 Departments, JimVan Dame of My-Lite Daylighting Systems and Products, Doug Gehring of Celotex, Ivan Johnson

  11. DAYLIGHTING DIRECTORY 1/1980

    E-Print Network [OSTI]

    ,

    2012-01-01T23:59:59.000Z

    Lighting Design and ~ylight:ing and Passive Solar Buildin. ~Design and Applications, Febo and Kiarch, 1979. "Daylighting and Passive SolarPassive Solar Conference, pp. 271 - 281, January 1979. TERNOEY, STEVEN "Daylighting Design

  12. Intelligent Daylight Panel Control System based on Fuzzy Control for Green Buildings

    E-Print Network [OSTI]

    T. C. Kuo; J. S. Lin; Y. Takeuchi; Y. J. Huang

    Abstract桾his paper proposes an intelligent daylight panel control system based on fuzzy control theory for green buildings. The goal of this research is to automatically modulate sunlight efficiently and to enhance the quality of interior illuminations, thus reducing the need for artificial lighting and conserving energy. Daylight panels are typically installed on the outside of windows. By applying the proposed fuzzy controller, the reflection angle of daylight panels could be adjusted and optimized so that interior illuminative quality is improved and energy-saving is achieved at the same time. Index Termsdaylight panel, intelligent control, fuzzy control. I.

  13. Effective Daylighting: Evaluating Daylighting Performance in the San Francisco Federal Building from the Perspective of Building Occupants

    E-Print Network [OSTI]

    Konis, Kyle Stas

    2012-01-01T23:59:59.000Z

    quantitative performance indicators of daylight sufficiency?assumptions of existing daylighting performance indicators.existing daylight performance indicators overestimated the

  14. Daylighting Calculation in DOE-2

    E-Print Network [OSTI]

    Winkelmann, F.C

    2013-01-01T23:59:59.000Z

    46 3.2.2 Luminous Efficacy of Solar Radiation . . . . . . .The Availability of Solar Radiation. and Daylight",incidence TSOLNM for solar radiation. TSOLDF =

  15. Advanced fenestration systems for improved daylight performance

    E-Print Network [OSTI]

    Selkowitz, S.; Lee, E.S.

    1998-01-01T23:59:59.000Z

    Systems for Improved Daylight Performance S. Selkowitz, E.S.Systems for Improved Daylight Performance S. Selkowitz, E.S.Introduction The use of daylight to replace or supplement

  16. Daylighting Islais Creek : a feasibility study

    E-Print Network [OSTI]

    Jencks, Rosey; Leonardson, Rebecca

    2004-01-01T23:59:59.000Z

    for daylighting the creek and other green infrastructure.Daylighting Islais Creek for stormwater conveyance wouldGlen Park Cayuga Islais Creek Runoff Elev. Slope coeff.

  17. Daylighting | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE Facility Database DataDatatechnic InternationalMontana:Heights,Daylighting

  18. DAYLIGHTING METRICS: IS THERE A RELATION BETWEEN USEFUL DAYLIGHT ILLUMINANCE AND DAYLIGHT GLARE PROBABILITY?

    E-Print Network [OSTI]

    J. Mardaljevic; M. Andersen; N. Roy; J. Christoffersen

    The establishment of climate-based daylight modelling within research and practice has led to a fundamental reassessment of both the basis and purpose of daylight metrics. Whilst there is no consensus yet on the precise nature of the metric(s) that should replace the daylight factor, it is generally agreed that these should be founded on climate-based daylight modelling (CBDM). In this paper we examine the relation between the predicted annual occurrence of glare and one of the candidate CBDM metrics that has been proposed, called useful daylight illuminance (UDI). The purpose is to determine if one or more of the UDI metrics (predicted for the horizontal workplane) could serve as a proxy for the probability of daylight glare (i.e. a measure of vertical illuminance received at the eye). For glare we use the simplified daylight glare probability model. The setting is a residential building which we use as a 憊irtual laboratory in two design configurations, each evaluated under all 32 combinations of 8 European climates and 4 building orientations.

  19. Integrating automated shading and smart glazings with daylight controls

    E-Print Network [OSTI]

    Selkowitz, Stephen; Lee, Eleanor

    2004-01-01T23:59:59.000Z

    Effect of Venetian Blinds on Daylight Photoelectric Controland Smart Glazings with Daylight Controls Stephen Selkowitzwith the outdoors and daylight to enhance the quality of the

  20. Singapore's Zero-Energy Building's daylight monitoring system

    E-Print Network [OSTI]

    Grobe, Lars

    2010-01-01T23:59:59.000Z

    A and Mardaljevic J, Useful daylight illuminance: a newparadigm for assessing daylight in buildings, LightingJ and Rogers Z, Dynamic daylight performance metrics for

  1. CALCULATING INTERIOR DAYLIGHT ILLUMINATION WITH A PROGRAMMABLE HAND CALCULATOR

    E-Print Network [OSTI]

    Bryan, Harvey J.

    2013-01-01T23:59:59.000Z

    Committee E-3.2, "Daylight: International RecommendationsCalculation of Natural Daylight," CIE PUBLICATION No. 16,Committee E-3.2, "Natural Daylight: Official Recommenda-

  2. CALCULATING INTERIOR DAYLIGHT ILLUMINATION WITH A PROGRAMMABLE HAND CALCULATOR

    E-Print Network [OSTI]

    Bryan, Harvey J.

    2013-01-01T23:59:59.000Z

    Committee E-3.2, "Daylight: International Recommendationsthe Calculation of Natural Daylight, 11 CIE PUBLICATION No.Committee E-3.2 1 "Natural Daylight: Official Recommenda-

  3. UNIVERSITY OF CALIFORNIA, SAN DIEGO Acoustic Daylight: passive acoustic imaging

    E-Print Network [OSTI]

    Buckingham, Michael

    UNIVERSITY OF CALIFORNIA, SAN DIEGO Acoustic Daylight: passive acoustic imaging using ambient noise ............................................................................................... xviii SECTION 1: INTRODUCTION Chapter 1: Acoustic Daylight......................................................................... 1 1.2 Acoustic Daylight

  4. Daylighting Calculation in DOE-2

    E-Print Network [OSTI]

    Winkelmann, F.C

    2013-01-01T23:59:59.000Z

    the sequence: d. space reference point exterior wall windowsystem (BCS). space system to Begin Exterior Wall Loop (1)least one daylit space. 3.2.1 Exterior Daylight Availability

  5. DAYLIGHTING METRICS FOR RESIDENTIAL BUILDINGS

    E-Print Network [OSTI]

    unknown authors

    It is now widely accepted that the standard method for daylighting evaluation- the daylight factor- is due for replacement with metrics founded on absolute values for luminous quantities predicted over the course of a full year using sun and sky conditions derived from standardised climate files. The move to more realistic measures of daylighting introduces significant levels of additional complexity in both the simulation of the luminous quantities and the reduction of the simulation data to readily intelligible metrics. The simulation component, at least for buildings with standard glazing materials, is reasonably well understood. There is no consensus however on the composition of the metrics, and their formulation is an ongoing area of active research. Additionally, non-domestic and residential buildings present very different evaluation scenarios and it is not yet clear if a single metric would be applicable to both. This study uses a domestic dwelling as the setting to investigate and explore the applicability of daylighting metrics for residential buildings. In addition to daylighting provision for task and disclosing the potential for reducing electric lighting usage, we also investigate the formulation of metrics for non-visual effects such as entrainment of the circadian system.

  6. 4.430 Daylighting, Fall 2006

    E-Print Network [OSTI]

    Andersen, Marilyne

    This class provides the tools necessary for an efficient integration of daylighting issues in the overall design of a building. The fundamentals of daylighting and electric lighting are introduced and their relevance to ...

  7. CALIFORNIA ENERGY Summary Of Daylighting In Schools

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION Summary Of Daylighting In Schools: Reanalysis Report ReanalysisConocha of Federated Departments, Jim Van Dame of My-Lite Daylighting Systems and Products, Doug Gehring of Celotex

  8. Fall Back Daylight Savings time is November

    E-Print Network [OSTI]

    Linsley, Braddock K.

    Fall Back 颅 Daylight Savings time is November 2nd.The Energy Policy Act of 2005 changed both the starting and ending dates. Beginning in 2007, daylight time starts on the second Sunday in March and ends

  9. Daylighting Application and Effectiveness in Industrial Facilities

    E-Print Network [OSTI]

    McCowan, B.; Birleanu, D.

    2005-01-01T23:59:59.000Z

    artificial lighting became available, most older industrial buildings had their daylighting features boarded over. With modern glazing systems and sophisticated designs that minimize glare issues, daylighting for industrial buildings is making a strong...

  10. Daylight metrics and energy savings J. Mardaljevic

    E-Print Network [OSTI]

    LBNL-4585E Daylight metrics and energy savings Authors: J. Mardaljevic Institute of Energy 2009; 0: 1颅23 ! Daylight metrics and energy savings J. Mardaljevic a , L. Heschong b , E.S. Lee c comfort performance. Current metrics do not account for the temporal and spatial aspects of daylight, nor

  11. I Color recognition models of daylight illumi-

    E-Print Network [OSTI]

    Draper, Bruce A.

    I Color recognition models of daylight illumi- nation and hybrid reflectance, and predicts of the color of ob- jects with respect to existing models of daylight [12] and surface reflectance [17, 14, 211 a surface reflectance model for hybrid surfaces and a context-based model of daylight illumination

  12. A SIMPLIFIED PROCEDURE FOR CALCULATING THE EFFECTS OF DAYLIGHT FROM CLEAR SKIES

    E-Print Network [OSTI]

    Bryan, Harvey J.

    2012-01-01T23:59:59.000Z

    J. , "The Calculation of Daylight Factor for Clear Skyand Predetermination of Daylight Illumination," ILLUMINATINGA MEASURING DIAGRAM FOR DAYLIGHT ILLUMINATION, Batsford,

  13. Does Extending Daylight Saving Time Save Energy? Evidence from an Australian Experiment

    E-Print Network [OSTI]

    KELLOGG, RYAN M; Wolff, Hendrik

    2007-01-01T23:59:59.000Z

    Tellier, F. (2005): Daylight Saving Time and EnergyCEC, 2001: Effects of Daylight Saving Time on California2004): The effects of daylight and daylight saving time on

  14. Investigating Daylight Quality In Malaysian Government Office Buildings Through Daylight Factor

    E-Print Network [OSTI]

    Surface Luminance; Mohd Zin K; Mohd Sabere Sulaiman; Yong Razidah Rashid; Dilshan Remaz Ossen; Aminatuzuhariah M; Lim Yaik Wah; Mansour Nikpour

    Abstract桰n recent years, there has been an increasing interest in using daylight to save energy in buildings. In tropical regions, daylighting is always an energy saver. On the other hand, daylight provides visual comfort. According to standards, it shows that many criteria should be taken into consideration in order to have daylight utilization and visual comfort. The current standard in Malaysia, MS 1525 does not provide sufficient guideline. Hence, more research is needed on daylight performance. If architects do not consider daylight design, it not only causes inconvenience in working spaces but also causes more energy consumption as well as environmental pollution. This research had surveyed daylight performance in 5 selected office buildings from different area of Malaysian through experimental method. Several parameters of daylight quality such as daylight factor, surface luminance and surface luminance ratio were measured in different rooms in each building. The result of this research demonstrated that most of the buildings were not designed for daylight utilization. Therefore, it is very important that architects follow the daylight design recommendation to reduce consumption of electric power for artificial lighting while the sufficient quality of daylight is available. KeywordsDaylight factor, Field measurement, Daylighting quality, Tropical

  15. daylight 12/17/2007 1 Tracking the change in the amount of daylight

    E-Print Network [OSTI]

    Taylor, Peter

    daylight 12/17/2007 1 Tracking the change in the amount of daylight Ever notice that at some times successive days? (c) (Calculus) The daylight graph has been drawn with sine-curve. Find its equation. (d) Use get the following diagram. #12;daylight 12/17/2007 2 0 2 4 6 8 10 12 14 16 18 20 0 20 40 60 80 100 120

  16. Effect of daylighting on energy consumption and daylight quality in an existing elementary school

    E-Print Network [OSTI]

    Atre, Umesh Vinayak

    2005-08-29T23:59:59.000Z

    EFFECT OF DAYLIGHTING ON ENERGY CONSUMPTION AND DAYLIGHT QUALITY IN AN EXISTING ELEMENTARY SCHOOL A Thesis by UMESH VINAYAK ATRE Submitted to the Office of Graduate Studies of Texas A&M University in partial... fulfillment of the requirements for the degree of MASTER OF SCIENCE May 2005 Major Subject: Architecture EFFECT OF DAYLIGHTING ON ENERGY CONSUMPTION AND DAYLIGHT QUALITY IN AN EXISTING ELEMENTARY SCHOOL A...

  17. Daylighting controls; Orphan of HVAC design

    SciTech Connect (OSTI)

    Rundquist, R.A. (R.A. Rundquist Associates Inc., Northampton, MA (US))

    1991-11-01T23:59:59.000Z

    This paper reports that in the array of strategies employed for energy-efficient design and retrofitting in commercial buildings, the use of daylighting controls is often overlooked or omitted. Thus, daylighting controls are a worthy but neglected orphan of the design process, stranded between the lighting designer, architect and engineer. Most daylighting analysis ignores HVAC effects, despite obvious interactions between windows, heat-from-lights, and thermal loads.

  18. Energy 101: Daylighting | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Highly efficient, strategically placed windows maximize the use of natural daylight in a building, lowering the need for artificial lighting without causing heating or...

  19. Do Daylight-Saving Time Adjustments Really Impact Stock Returns?

    E-Print Network [OSTI]

    Steigerwald, Douglas G; Conte, Marc

    2007-01-01T23:59:59.000Z

    I. Taylor, 1935, World Daylight Saving Time, Chicago: Cur-Sleep at the Market: The Daylight Saving Anomaly, AmericanSleep at the Market: The Daylight Saving Anomaly: Reply,

  20. Simulating the Daylight Performance of Complex Fenestration Systems Using

    E-Print Network [OSTI]

    LBNL-4414E Simulating the Daylight Performance of Complex Fenestration Systems Using Bidirectional, January 21, 2011. 1 Simulating the Daylight Performance of Complex Fenestration Systems Using (BSDFs) to model the daylighting performance of complex fenestration systems (CFS), enabling greater

  1. Integrated Daylight Harvesting and Occupancy Detection Using Digital Imaging

    E-Print Network [OSTI]

    Salvaggio, Carl

    Integrated Daylight Harvesting and Occupancy Detection Using Digital Imaging Abhijit Sarkar dynamic range CMOS video camera to integrate daylight harvesting and occupancy sensing functionalities by these sensors. The prototype involves three algorithms, daylight estimation, occupancy detection and lighting

  2. International Symposium on Daylighting Buildings (IEA SHC TASK 31) Integrating Automated Shading and Smart Glazings with Daylight

    E-Print Network [OSTI]

    International Symposium on Daylighting Buildings (IEA SHC TASK 31) Integrating Automated Shading and Smart Glazings with Daylight Controls Stephen Selkowitz Eleanor Lee Lawrence Berkeley National Laboratory Keywords: daylighting, controls, smart glazing, shading, field testing, IEA31 1. INTRODUCTION Most

  3. June 1998Program Description Windows and Daylighting Group

    E-Print Network [OSTI]

    June 1998Program Description THERM 2.0 Windows and Daylighting Group Building Technologies, and Dariush Arasteh Windows and Daylighting Group Building Technologies Department Environmental Energy

  4. A Practical Analytic Model for Daylight Category: research

    E-Print Network [OSTI]

    Shirley, Peter

    A Practical Analytic Model for Daylight Category: research Abstract Sunlight and skylight that approximates full spectrum daylight for various atmospheric con颅 ditions. These conditions are parameterized

  5. A Practical Analytic Model for Daylight Category: research

    E-Print Network [OSTI]

    Shirley, Peter

    A Practical Analytic Model for Daylight Category: research Abstract Sunlight and skylight that approximates full spectrum daylight for various atmospheric con- ditions. These conditions are parameterized

  6. Singapore's Zero-Energy Building's daylight monitoring system

    E-Print Network [OSTI]

    Grobe, Lars

    2010-01-01T23:59:59.000Z

    Singapore抯 Zero-Energy Building抯 daylight monitoringSingapore抯 Zero-Energy Building's daylight monitoringchambers in BCAA's Zero Energy Building in Singapore. These

  7. Daylight metrics and energy savings

    SciTech Connect (OSTI)

    Mardaljevic, John; Heschong, Lisa; Lee, Eleanor

    2009-12-31T23:59:59.000Z

    The drive towards sustainable, low-energy buildings has increased the need for simple, yet accurate methods to evaluate whether a daylit building meets minimum standards for energy and human comfort performance. Current metrics do not account for the temporal and spatial aspects of daylight, nor of occupants comfort or interventions. This paper reviews the historical basis of current compliance methods for achieving daylit buildings, proposes a technical basis for development of better metrics, and provides two case study examples to stimulate dialogue on how metrics can be applied in a practical, real-world context.

  8. Assessing the Feasibility of Creek Daylighting in San Francisco, Part I: A Synthesis of Lessons Learned from Existing Urban Daylighting Projects

    E-Print Network [OSTI]

    Smith, Brooke Ray

    2007-01-01T23:59:59.000Z

    and Leonardson 2004). Why Daylight? In San Francisco, creekof San Francisco to daylight historical urban creeks withincity governments to daylight urban creeks, with successful

  9. Effective Daylighting: Evaluating Daylighting Performance in the San Francisco Federal Building from the Perspective of Building Occupants

    E-Print Network [OSTI]

    Konis, Kyle Stas

    2011-01-01T23:59:59.000Z

    quantitative performance indicators of daylight sufficiency?set of daylighting performance indicators for examination inassumptions of performance indicators under real work

  10. Effective Daylighting: Evaluating Daylighting Performance in the San Francisco Federal Building from the Perspective of Building Occupants

    E-Print Network [OSTI]

    Konis, Kyle Stas

    2012-01-01T23:59:59.000Z

    quantitative performance indicators of daylight sufficiency?set of daylighting performance indicators for examination inassumptions of performance indicators under real work

  11. Hiding patterns with daylight fluorescent inks

    E-Print Network [OSTI]

    Romain Rossier; Roger D. Hersch; School Of Computer; Communication Sciences; Ecole Polytechnique; F閐閞ale Lausanne

    We propose a method for hiding patterns within printed images by making use of classical and of two daylight fluorescent magenta and yellow inks. Under the D65 illuminant we establish in the CIELAB space the gamut of a classical cmyk printer and the gamut of the same printer using a combination of classical inks with daylight fluorescent inks. These gamuts show that a significant part of the classical ink gamut can be reproduced by combining classical inks with daylight fluorescent inks. By printing parts of images with a combination of classical and daylight fluorescent inks instead of using classical inks only, we can hide security patterns within printed images. Under normal daylight, we do not see any difference between the parts printed with classical inks only and the parts printed with daylight fluorescent inks and classical inks. By changing the illumination, e.g. by viewing the printed image under a tungsten lamp or under a UV lamp, the daylight fluorescent inks change their colors and reveal the security pattern formed by combinations of classical inks and of daylight fluorescent inks.

  12. SBi 2006:08 Assessment of daylight quality

    E-Print Network [OSTI]

    SBi 2006:08 Assessment of daylight quality in simple rooms Impact of three window configurations on daylight conditions, Phase 2 #12;#12;SBi 2006:08 Danish Building Research Institute 2006 Assessment of daylight quality in simple rooms Impact of three window configurations on daylight conditions, Phase 2

  13. Monitored Energy Performance of Electrochromic Windows Controlled for Daylight and Visual Comfort

    E-Print Network [OSTI]

    Lee, Eleanor S.; DiBartolomeo, Dennis L.; Klems, Joseph; Yazdanian, Mehry; Selkowitz, Stephen E.

    2005-01-01T23:59:59.000Z

    Windows Controlled for Daylight and Visual Comfort Eleanorof means to bring in daylight while minimizing window glare.was controlled to admit daylight while the lower zone was

  14. Evaluation of Climate-Based Daylight Performance in Tropical Office Buildings- A Case Study

    E-Print Network [OSTI]

    Szu-Cheng, CHIEN; King Jet, TSENG

    2013-01-01T23:59:59.000Z

    and Z. Rogers, Dynamic Daylight Performance Metrics forof interior design on the daylight availability in open plan2002. [14] Z. Rogers, Daylight metric development using

  15. SIMULATION-ASSISTED DAYLIGHT PERFORMANCE ANALYSISIN A HIGH-RISE OFFICE BUILDING IN SINGAPORE

    E-Print Network [OSTI]

    CHIEN, Szu Cheng; TSENG, King Jet

    2013-01-01T23:59:59.000Z

    Flodberg, K. (2013). Daylight utilisation in perimeterJ. , (2005a). 揢seful Daylight Illuminance: A NewParadigm to Access Daylight in Buildings. Lighting

  16. Simulating the Daylight Performance of Complex Fenestration Systems Using Bidirectional Scattering Distribution Functions within Radiance

    E-Print Network [OSTI]

    Ward, Gregory

    2011-01-01T23:59:59.000Z

    761-81. Tregenza PR. 1983. Daylight coefficients. Lighting773. Reinhart CF. 2001. Daylight availability and manualA visualization of an incident daylight matrix (cumulative

  17. Does Daylight Saving Time Save Energy? Evidence from a Natural Experiment in Indiana

    E-Print Network [OSTI]

    Kotchen, Matthew J; Grant, Laura E.

    2008-01-01T23:59:59.000Z

    The Energy Impact of Daylight Saving Time Implementation insleep at the market: The daylight saving anomaly. Americansleep at the market: The daylight saving anomaly: Reply.

  18. A PROCEDURE FOR CALCULATING INTERIOR DAYLIGHT ILLUMINATION WITH A PROGRAMMABLE HAND CALCULATOR

    E-Print Network [OSTI]

    Bryan, H.J.

    2010-01-01T23:59:59.000Z

    FOR CALCULATING INTERIOR DAYLIGHT ILLUMINATION WITH ACommittee E-3.2, "Daylight: International RecommendationsCalcula- tion of Natural Daylight," CIE PUBLICATION No. 16,

  19. Performance-based assessment of daylight on tropical buildings- a case Study

    E-Print Network [OSTI]

    Szu Cheng, CHIEN

    2013-01-01T23:59:59.000Z

    81% 81% 95% 96% 74% 68% Daylight autonomy max (DAmax) >5%32% 28% 11% 9% 11% 6% Useful daylight illuminance (UDI) Daylight Performance Metrics for

  20. 4.492 Daylighting, Fall 2004

    E-Print Network [OSTI]

    Andersen, Marilyne

    The course focuses on the use and optimization of daylight in buildings and on its complementarity to artificial (electric) lighting, to aim at reducing the building's environmental impact while improving the visual comfort ...

  1. Daylighting Prediction Software: Comparative Analysis and Application

    E-Print Network [OSTI]

    Estes, J. M. Jr.; Schreppler, S.; Newsom, T.

    2004-01-01T23:59:59.000Z

    in selecting a software program are presented. 揜adiance, a reverse ray tracing method software package, was chosen for use in the simulations. An existing school was modeled with the Radiance software and predictions of daylighting contributions were compared...

  2. Daylighting Application and Effectiveness in Industrial Facilities

    E-Print Network [OSTI]

    McCowan, B.; Birleanu, D.

    2005-01-01T23:59:59.000Z

    during the industrial revolution, architects utilized various daylighting strategies such as window walls, skylighting, monitors, etc. However, glazing technologies were primitive compared with our modern choices, When more efficient and effective...

  3. Utilizing Daylighting Controls in a Manufacturing Facility

    E-Print Network [OSTI]

    Shrestha, S. S.; Maxwell, G. M.

    Utilizing Daylighting Controls in a Manufacturing Facility Som S. Shrestha Dr. Gregory M. Maxwell PhD Candidate Associate Professor som@iastate.edu gmaxwell@iastate.edu Iowa State University Ames, IA ABSTRACT Opportunities exist... to reduce artificial lighting in manufacturing facilities which have skylights and/or fenestration that provide sufficient quantities of daylight to the work space. Using photometric sensors to measure the illuminance in the space, artificial lights can...

  4. Focus group discussions of daylighting practices

    SciTech Connect (OSTI)

    Roberson, B.F.; Harkreader, S.A.

    1988-11-01T23:59:59.000Z

    This research was sponsored by the US Department of Energy (DOE) Office of Buildings and Community systems and conducted by Pacific Northwest Laboratory (PNL) as part of an ongoing effort to enhance the commercial use of federally developed technologies. One such technology is the use of daylighting practices in the design of nonresidential buildings. This document is a report of the findings from meetings of focus groups conducted to gain insight into building designers' perceptions and attitudes about daylighting systems.

  5. Technology reviews: Daylighting optical systems

    SciTech Connect (OSTI)

    Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

    1992-09-01T23:59:59.000Z

    We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology. Determine the performance range of available technologies. Identify the most promising technologies and promising trends in technology advances. Examine market forces and market trends.Develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fall into that class.

  6. Abstract A Hierarchical Algorithm for Radiosity Daylighting

    E-Print Network [OSTI]

    Gonzalo Besuievsky; Ignacio Martin

    A new daylight simulation method for radiosity environments is presented. Daylight illumination is transported in a first step where sun and sky are represented as a set of directional sources. Light is transported using parallel projections of these sources. The scene mesh is adaptively subdivided using energy and visibility criteria obtained from a extended scan-line algorithm that computes a layered depth image for each projection. In a second step, diffuse intereflection is computed through a hierarchical Monte Carlo radiosity algorithm. The method is feasible for it extension for environments containing specular surfaces. Relative short time view-independent global illumination results can be obtained with the proposed method, which make it suitable for daylight building design and analysis applications for both indoors and outdoors environments. 1

  7. Singapore's Zero-Energy Building's daylight monitoring system

    E-Print Network [OSTI]

    Grobe, Lars

    2010-01-01T23:59:59.000Z

    DGP Established performance indicators are illuminanceled to new performance indicators. The Useful Daylightsimulation. The performance indicator used was the Daylight

  8. Building Information Modeling (BIM)-Based Daylighting Simulation and Analysis

    E-Print Network [OSTI]

    Kota, S.; Haberl, J.S.; Clayton, M.; Yan, W.

    2014-01-01T23:59:59.000Z

    will be converted into daylighting models to run on the daylighting simulation engines. Once the architect defines the architectural model in CAD, a simulation expert creates the simulation input file to perform daylighting analysis. Each tool has its own way... the Radiance input file is created, different Radiance utilities are called using MS Windows BATCH scripting for doing a daylighting analysis [15]. In addition to AutoCAD, Radiance also has many utility programs that help in converting different geometry...

  9. Building Information Modeling (BIM)-Based Daylighting Simulation and Analysis

    E-Print Network [OSTI]

    Kota, S.; Haberl, J.S.; Clayton, M.; Yan, W.

    tools Radiance and DAYSIM. Keywords: Building Information Modeling, BIM, Daylighting Simulation, Radiance, DAYSIM 1 Introduction Building performance analyses are important aspects of designing sustainable buildings. One of the performance analyses...) with daylighting analysis tools (Radiance and DAYSIM as sample simulation tools, which are widely used to study the daylighting performance of buildings). 2 Literature review 2.1 Daylighting simulation tools Over the years many analysis tools have been...

  10. A Spatially Augmented Reality Sketching Interface for Architectural Daylighting Design

    E-Print Network [OSTI]

    Varela, Carlos

    1 A Spatially Augmented Reality Sketching Interface for Architectural Daylighting Design Yu Sheng to architectural daylight modeling that allows designers to explore alternative designs and new technologies are then projected on the real model by four calibrated projectors to help users study the daylighting illumination

  11. Quantifying the Impact of Daylight Saving Clock Changes

    E-Print Network [OSTI]

    Hill, Simon I.

    Quantifying the Impact of Daylight Saving Clock Changes on Energy Consumption Simon I. Hill of Daylight Saving Clock Changes on Energy Consumption Simon I. Hill, Fr茅d茅ric Desobry and Yu-Foong Chong May DST Daylight Saving Time EIA Energy Information Administration GDP Gross Domestic Product GMT

  12. 15 Acoustic Daylight Imaging in the Michael J. Buckingham

    E-Print Network [OSTI]

    Buckingham, Michael

    15 Acoustic Daylight Imaging in the Ocean Michael J. Buckingham Scripps Institution of Oceanography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418 15.4 Acoustic daylight images . . . . . . . . . . . . . . . . . . . . . . . . 420 15.5 Concluding. Sensors and Imaging ISBN 0颅12颅379771颅3/$30.00 #12;416 15 Acoustic Daylight Imaging in the Ocean Acoustic

  13. Daylighting a Green High School Smart Schools Symposium 2013

    E-Print Network [OSTI]

    California at Davis, University of

    Daylighting a Green High School Smart Schools Symposium 2013 #12;AMERICAN CANYON HIGH SCHOOL NAPA CHPS Verified School in CA Daylighting a major focus of sustainable design strategy Began design and orientations First and second story Goals: best daylighting possible flexible lighting system simple and cost

  14. Loss of Daylight Vision in Retinal Degeneration: Are

    E-Print Network [OSTI]

    Tabin, Cliff

    Loss of Daylight Vision in Retinal Degeneration: Are Oxidative Stress and Metabolic Dysregulation, particularly in cones, the type of photoreceptors that mediate daylight and color vision. The evidence, providing our daylight vision, and have many of the same features and vulnerabilities as rod photoreceptors

  15. Inferring Architectural Designs from Physical Sketches: Application to Daylighting Analysis

    E-Print Network [OSTI]

    Varela, Carlos

    Inferring Architectural Designs from Physical Sketches: Application to Daylighting Analysis Barbara and a closed, 3D triangle mesh representation is constructed. We apply the system to architectural daylighting, daylighting analy- sis, and image processing. ACM Classification Keywords H.5.1 Information Interfaces

  16. The Impact on Energy Consumption of Daylight Saving Clock Changes

    E-Print Network [OSTI]

    Hill, Simon I.

    The Impact on Energy Consumption of Daylight Saving Clock Changes S. I. Hilla, , F. Desobrya , E. W demonstrating po- tential energy savings which could be obtained were Great Britain to maintain Daylight Savings result from an extension of Daylight Saving Time (DST) over the months currently on Greenwich Mean Time

  17. Singapore's Zero-Energy Building's Daylight Monitoring System

    E-Print Network [OSTI]

    LBNL-3708E Singapore's Zero-Energy Building's Daylight Monitoring System Author(s), L. Grobe; S thereof or The Regents of the University of California. #12;Singapore's Zero-Energy Building's daylight, 94720 California, USA 1. Abstract A setup to monitor the daylighting performance of different glazing

  18. COMPUTATIONAL SIMULATIONS FOR PREDICTING VERTICAL DAYLIGHT LEVELS IN ATRIUM BUILDINGS

    E-Print Network [OSTI]

    Jiangtao Du; Steve Sharples

    This paper investigates the impact of well geometry and surface reflectance on vertical daylight levels in atria with square forms under a CIE standard overcast sky. By reviewing some previous investigations and comparing with scale model measurements the vertical daylight factor calculated using Radiance are validated. More simulated vertical daylight factors for a very wide range of atrium geometries and reflectances are given. From the results the attenuation and distribution of the vertical daylight levels on the wall of a square atrium with different reflectances are displayed. Also, the comparisons between simulations and two analytical theories have been performed. Finally some conclusions for supporting daylight design in atria are presented.

  19. Does Daylight Savings Time Affect Traffic Accidents?

    E-Print Network [OSTI]

    Deen, Sophia 1988-

    2012-04-20T23:59:59.000Z

    This paper studies the effect of changes in accident pattern due to Daylight Savings Time (DST). The extension of the DST in 2007 provides a natural experiment to determine whether the number of traffic accidents is affected by shifts in hours...

  20. Assessing the Feasibility of Creek Daylighting in San Francisco, Part II: A Preliminary Analysis of Yosemite Creek

    E-Print Network [OSTI]

    Smith, Brooke Ray

    2007-01-01T23:59:59.000Z

    or purchased properties) to daylight the stream? Or is itrestoration (Smith 2007). Why Daylight in San Francisco? Inof San Francisco to daylight Yosemite Creek, how and where

  1. Correlation time of ocean ambient noise intensity in San Diego Bay and target recognition in acoustic daylight images

    E-Print Network [OSTI]

    Wadsworth, Adam J.

    2010-01-01T23:59:59.000Z

    Intensity Data Chapter 3 Acoustic Daylight Image TargetC. L. Epifanio. Acoustic Daylight: Passive Acoustic ImagingRecognition in Acoustic Daylight Images A Thesis submitted

  2. OpenStudio Enhancements for Whole-Building Daylighting, Airflow...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    aims to boost retrofit projects and enable project teams to easily integrate energy, daylight, and airflow modeling into their design workflows. View the Presentation OpenStudio...

  3. Singapore's Zero-Energy Building's daylight monitoring system

    E-Print Network [OSTI]

    Grobe, Lars

    2010-01-01T23:59:59.000Z

    Singapore抯 Zero-Energy Building抯 daylight monitoringof California. Singapore抯 Zero-Energy Building's daylightchambers in BCAA's Zero Energy Building in Singapore. These

  4. Integrating automated shading and smart glazings with daylight controls

    E-Print Network [OSTI]

    Selkowitz, Stephen; Lee, Eleanor

    2004-01-01T23:59:59.000Z

    Automated Shading and Smart Glazings with Daylight Controlsdaylighting, controls, smart glazing, shading, fielddeveloping switchable 搒mart glazings for over a decade and

  5. Acceleration of the matrix multiplication of Radiance three phase daylighting simulations

    E-Print Network [OSTI]

    LBNL-6461E Acceleration of the matrix multiplication of Radiance three phase daylighting multiplication of Radiance three phase daylighting simulations with parallel computing on heterogeneous hardware. Radiance, a lighting simulation program, has been used to conduct daylighting simulations for complex

  6. Does Daylight Saving Time Save Energy? Evidence from a Natural Experiment in Indiana

    E-Print Network [OSTI]

    Kotchen, Matthew J; Grant, Laura E.

    2008-01-01T23:59:59.000Z

    Does Extending Daylight Saving Time Save Energy? Evi- denceWP 179 Does Daylight Saving Time Save Energy? Evidence fromwww.ucei.org Does Daylight Saving Time Save Energy? Evidence

  7. Green Classroom: Daylighting-conscious Design for Kuwait Autism Center

    E-Print Network [OSTI]

    Abdullah Al-mohaisen; Omar Khattab

    Consideration to the natural elements, such as daylighting, at the earliest in the architectural design process is suggested by many as necessary for sustainable buildings. The implementation of a successful daylighting strategy in the design of buildings improves spatial quality and saves energy required, otherwise, for artificial lighting. Daylighting becomes a design mandate in the case of certain spaces; e.g. classrooms in educational buildings. Many researchers have indicated a correlation between the way classrooms are designed and students ' performance. This paper discusses a case study of the environmental design of Kuwait Autism Centre that adopted the provision of adequate daylighting in educational spaces as a major design focus. An extensive daylighting evaluation was conducted on all educational facilities of the proposed conceptual design of the centre. The recommendations from the evaluation were implemented in the design development stages. Earlier conceptual design drawings as well as the final designs are described. The paper summarises the daylighting design recommendations and explains the daylighting simulation process and analysis for decision making in design. Additionally it shows the annual energy savings as a result of the daylighting-conscious design of the classrooms.

  8. Color and spectral analysis of daylight in southern Europe

    E-Print Network [OSTI]

    Javier Hern醤dez-andr閟; Javier Romero; Juan L. Nieves; Raymond L. Lee

    2001-01-01T23:59:59.000Z

    We have analyzed the colorimetric and spectral characteristics of 2600 daylight spectra (global spectral irradiances on a horizontal surface) measured for all sky states during a 2-year period at Granada, Spain. We describe in detail the chromaticity coordinates, correlated color temperatures (CCT), luminous efficacies, and relative UV and IR contents of Granada daylight. The chromaticity coordinates of Granada daylight lie far above the CIE locus at high CCTs (?9000 K), and a CCT of 5700 K best typifies this daylight. Our principalcomponents analysis shows that Granada daylight spectra can be adequately represented by using sixdimensional linear models in the visible, whereas seven-dimensional models are required if we include the UV or near-IR. Yet on average only three-dimensional models are needed to reconstruct spectra that are colorimetrically indistinguishable from the original spectra. 2001 Optical Society of America OCIS codes: 010.1290, 330.1710, 330.1730. 1.

  9. (Daylight saving time (DST), implemented as an energy saving policy, impacts many other aspects of

    E-Print Network [OSTI]

    Levinson, David M.

    Abstract( (Daylight saving time (DST), implemented as an energy saving policy, impacts many other(of(DST( The idea of daylight saving time is to transfer an hour of morning daylight to the evening. It is achieved (3am-9am, 9am-3pm, 3pm-9pm, 9pm-12am). The(effects(of(daylight

  10. Anomalous trichromats' judgments of surface color in natural scenes under different daylights

    E-Print Network [OSTI]

    Foster, David H.

    Anomalous trichromats' judgments of surface color in natural scenes under different daylights daylight illuminants were presented on a high-resolution color monitor to 7 deuteranomalous, 7 to the daylight locus rather than along the daylight locus ~Foster & Linnell, 1995; Amano et al., 2003

  11. The effects of daylight saving time on vehicle crashes in Minnesota Arthur Huang a,

    E-Print Network [OSTI]

    Levinson, David M.

    The effects of daylight saving time on vehicle crashes in Minnesota Arthur Huang a, , David: Daylight saving time Vehicle crashes Exposure Traffic volume Introduction: Daylight saving time (DST analysis shows that overall DST reduces crashes. Impact on industry: Daylight saving time can lead to fewer

  12. Improving the daylighting conditions of existing buildings : the benefits and limitations of integrating anidolic daylighting systems using the American classroom as a model

    E-Print Network [OSTI]

    Kleindienst, Si鈔 A. (Si鈔 Alexandra)

    2006-01-01T23:59:59.000Z

    Awareness of the benefits of good daylighting has risen in recent years, and the designs of many new buildings take daylighting into consideration. However, the majority of our built environment is older than this recent ...

  13. A validation of the Radiance three-phase simulation method for modeling annual daylight performance of optically-complex fenestration systems

    E-Print Network [OSTI]

    McNeil, Andrew

    2013-01-01T23:59:59.000Z

    J. , 2011. Simulating the Daylight Performance of Complexof dynamic RADIANCE-based daylight simulations for a testS.E. , 1998. Energy and Daylight Performance of Angular

  14. Daylight variability and contrast-driven architectural effect

    E-Print Network [OSTI]

    Rockcastle, Siobhan Francois

    2011-01-01T23:59:59.000Z

    Natural light is a dynamic and ephemeral tool for expressing the quality of architectural space. As a compliment to more traditional avenues of daylighting research that assess performance in terms of quantitative illuminance ...

  15. An intuitive daylighting performance analysis and optimization approach

    E-Print Network [OSTI]

    Andersen, Marilyne

    The effective integration of daylighting considerations into the design process requires many issues to be considered simultaneously, such as daily and seasonal variations, illumination, and thermal comfort. To address the ...

  16. Automated support for experimental approaches in daylighting performances assessment

    E-Print Network [OSTI]

    Ljubicic, Dean M

    2006-01-01T23:59:59.000Z

    The study of daylight and solar reflection has been a topic of increasing interest over the past two decades. A novel mechanical support has been constructed to help better understand this topic that consists of a five ...

  17. DAYLIGHTING IN CAMBRIDGE LIBRARIES: SHIFTING FOCUS OVER TIME

    E-Print Network [OSTI]

    Ayona Datta

    This paper aims to explore the various transformations of Cambridge libraries over the ages focusing mainly on the changing role of daylighting in library design. The libraries have been categorised chronologically into four different groups: Medieval libraries, libraries between 16 th cent and Reformation, libraries between Reformation and 19 th cent and modern libraries. The study shows that with the shift from the rules of classicism in medieval libraries to individual styles in modern libraries, the architect has opened up enormous possibilities for design innovations in daylighting. Unlike other environmental services the elements of daylighting are undoubtedly the most visual and expressive. The particular challenge of modern library design is to manipulate natural light for reading and book storage while avoiding reflections on the VDU. It is still a field not fully explored and it remains to be seen how daylighting design can successfully meet all the needs of a modern library. 1.

  18. Interfacing BIM with Building Thermal and Daylighting Modeling

    E-Print Network [OSTI]

    Yan, Wei; Clayton, Mark; Haberl, Jeff; WoonSeong, Jeong; Bun Kim, Jong; Sandeep, Kota; Bermudez, Jose; Dixit, Manish

    INTERFACING BIM WITH BUILDING THERMAL AND DAYLIGHTING MODELING Wei Yan, Mark Clayton, Jeff Haberl, WoonSeong Jeong, Jong Bum Kim, Sandeep Kota, Jose Luis Bermudez Alcocer, and Manish Dixit Texas A&M University, College Station, USA... the BIM authoring tools Application Programming Interface (API) to translate BIM into Object-Oriented Physical Models (in Modelica) for building thermal simulation, and input files of ray-tracing software (Radiance) for daylighting simulation. Based...

  19. Advanced optical daylighting systems: light shelves and light pipes

    SciTech Connect (OSTI)

    Beltran, L.O.; Lee, E.S.; Selkowitz, S.E.

    1996-05-01T23:59:59.000Z

    We present two perimeter daylighting systems that passively redirect beam sunlight further from the window wall using special optical films, an optimized geometry, and a small glazing aperture. The objectives of these systems are (1) to increase daylight illuminance levels at 4.6-9.1 m (15-30 ft) from the window aperture with minimum solar heat gains and (2) to improve the uniformity of the daylighting luminance gradient across the room under variable solar conditions throughout the year. The designs were developed through a series of computer-assisted ray-tracing studies, laser visualization techniques, and photometric measurements and observations using physical scale models. Bi-directional illuminance measurements in combination with analytical routines were then used to simulate daylight performance for any solar position, and were incorporated into the DOE-2.1E building energy analysis computer program to evaluate energy savings. Results show increased daylight levels and an improved luminance gradient throughout the year compared to conventional daylighting systems.

  20. Effective Daylighting: Evaluating Daylighting Performance in the San Francisco Federal Building from the Perspective of Building Occupants

    E-Print Network [OSTI]

    Konis, Kyle Stas

    2012-01-01T23:59:59.000Z

    Annex 29, Daylight in Buildings. October, 1997. Atif. M.R.case studies. Energy and Buildings 35 441-461. Attmann,George. 2010. Sustainable Buildings in Practice: What the

  1. FREE-SPACE QUANTUM CRYPTOGRAPHY IN DAYLIGHT

    SciTech Connect (OSTI)

    Hughes, R.J.; Buttler, W.T. [and others

    2000-01-01T23:59:59.000Z

    Quantum cryptography is an emerging technology in which two parties may simultaneously generate shared, secret cryptographic key material using the transmission of quantum states of light. The security of these transmissions is based on the inviolability of the laws of quantum mechanics and information-theoretically secure post-processing methods. An adversary can neither successfully tap the quantum transmissions, nor evade detection, owing to Heisenberg's uncertainty principle. In this paper we describe the theory of quantum cryptography, and the most recent results from our experimental free-space system with which we have demonstrated for the first time the feasibility of quantum key generation over a point-to-point outdoor atmospheric path in daylight. We achieved a transmission distance of 0.5 km, which was limited only by the length of the test range. Our results provide strong evidence that cryptographic key material could be generated on demand between a ground station and a satellite (or between two satellites), allowing a satellite to be securely re-keyed on orbit. We present a feasibility analysis of surface-to-satellite quantum key generation.

  2. Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office testbed

    E-Print Network [OSTI]

    Thanachareonkit, Anothai

    2014-01-01T23:59:59.000Z

    Jonsson JC. 2013. Daylight performance of a microstructuredH. Device for guiding daylight, US Patent 4,654,243 (JL, Selkowitz S. 2000. Daylight in buildings: A source book

  3. Constraints on supernovae dimming from photon-pseudo scalar coupling

    E-Print Network [OSTI]

    Yong-Seon Song; Wayne Hu

    2005-07-29T23:59:59.000Z

    An alternative mechanism that dims high redshift supernovae without cosmic acceleration utilizes an oscillation of photons into a pseudo-scalar particle during transit. Since angular diameter distance measures are immune to the loss of photons, this ambiguity in interpretation can be resolved by combining CMB acoustic peak measurements with the recent baryon oscillation detection in galaxy power spectra. This combination excludes a non-accelerating dark energy species at the 4sigma level regardless of the level of the pseudo-scalar coupling. While solutions still exist with substantial non-cosmological dimming of supernovae, they may be tested with future improvement in baryon oscillation experiments.

  4. Magnetospheric application of high-altitude long-duration balloon technology: Daylight auroral observations

    E-Print Network [OSTI]

    Lummerzheim, Dirk

    Magnetospheric application of high-altitude long-duration balloon technology: Daylight auroral; accepted 12 February 2007 Abstract Daylight auroral imaging is a proposed application of the NASA high

  5. Graphical Representation of Climate-Based Daylight Performance to Support Architectural Design

    E-Print Network [OSTI]

    Kleindienst, Si鈔

    Many conventional daylighting design tools are limited in that each simulation represents only one time of year and time of day (or a single, theoretical overcast sky condition). Since daylight is so variable due to the ...

  6. Question of the Week: How Do You Feel About the Extended Daylight...

    Broader source: Energy.gov (indexed) [DOE]

    Feel About the Extended Daylight Saving Time? Question of the Week: How Do You Feel About the Extended Daylight Saving Time? March 12, 2009 - 6:00am Addthis Have you been drinking...

  7. Historical Survey of Daylighting Calculations Methods and Their Use in Energy Performance Simulations

    E-Print Network [OSTI]

    Kota, S.; Haberl, J. S.

    This paper traces the historical development of different daylighting calculation methods. Over the years there have been several developments in daylighting calculation methods. The last two decades have seen a number of new ideas and approaches...

  8. The Soralux Daylighting System : passive solar illumination for deep-plan building spaces

    E-Print Network [OSTI]

    Thuot, Kevin W. (Kevin William)

    2011-01-01T23:59:59.000Z

    Daylight is a valuable resource for both energy and human health. However, this resource is often underutilized in buildings due to the difficulty of controlling the changing qualities of daylight. Deep-plan building spaces ...

  9. Lighting energy savings potential of split-pane electrochromic windows controlled for daylighting with visual comfort

    E-Print Network [OSTI]

    Fernandes, Luis

    2014-01-01T23:59:59.000Z

    Energy Performance of Electrochromic Windows Controlled forenergy performance of electrochromic windows. Proceedingssignal for daylight (electrochromic window, no overhang).

  10. Daylight control system, device and method

    DOE Patents [OSTI]

    Paton, John Douglas

    2012-08-28T23:59:59.000Z

    A system and device for and a method of programming and controlling light fixtures is disclosed. A system in accordance with the present invention includes a stationary controller unit that is electrically coupled to the light fixtures. The stationary controller unit is configured to be remotely programmed with a portable commissioning device to automatically control the lights fixtures. The stationary controller unit and the portable commissioning device include light sensors, micro-computers and transceivers for measuring light levels, running programs, storing data and transmitting data between the stationary controller unit and the portable commissioning device. In operation, target light levels selected with the portable commissioning device and the controller unit is remotely programmed to automatically maintain the target level.

  11. Daylight control system device and method

    DOE Patents [OSTI]

    Paton, John Douglas

    2007-03-13T23:59:59.000Z

    A system and device for and a method of programming and controlling light fixtures is disclosed. A system in accordance with the present invention includes a stationary controller unit that is electrically coupled to the light fixtures. The stationary controller unit is configured to be remotely programmed with a portable commissioning device to automatically control the lights fixtures. The stationary controller unit and the portable commissioning device include light sensors, micro-computers and transceivers for measuring light levels, running programs, storing data and transmitting data between the stationary controller unit and the portable commissioning device. In operation, target light levels selected with the portable commissioning device and the controller unit is remotely programmed to automatically maintain the target level.

  12. Daylight control system device and method

    DOE Patents [OSTI]

    Paton, John Douglas

    2009-12-01T23:59:59.000Z

    A system and device for and a method of programming and controlling light fixtures is disclosed. A system in accordance with the present invention includes a stationary controller unit that is electrically coupled to the light fixtures. The stationary controller unit is configured to be remotely programmed with a portable commissioning device to automatically control the lights fixtures. The stationary controller unit and the portable commissioning device include light sensors, micro-computers and transceivers for measuring light levels, running programs, storing data and transmitting data between the stationary controller unit and the portable commissioning device. In operation, target light levels selected with the portable commissioning device and the controller unit is remotely programmed to automatically maintain the target level.

  13. DELIGHT2 DAYLIGHTING ANALYSIS IN ENERGY PLUS: INTEGRATION AND PRELIMINARY USER RESULTS

    E-Print Network [OSTI]

    DELIGHT2 DAYLIGHTING ANALYSIS IN ENERGY PLUS: INTEGRATION AND PRELIMINARY USER RESULTS William L for daylight and electric lighting system analysis in buildings. DElight calculates interior illuminance levels from daylight, and the subsequent contribution required from electric lighting to meet a desired

  14. USING VIDEO FOR ANALYZING DAYLIGHT SIMULATION TOOLS Daniel C. Glaser1

    E-Print Network [OSTI]

    Varela, Carlos

    USING VIDEO FOR ANALYZING DAYLIGHT SIMULATION TOOLS Daniel C. Glaser1 , F. Whitney Smith2 , Barb socio-technical techniques can be employed to analyze video data of people using daylight simulation, a classic daylighting analysis tool; and in the second a lighting professional is asked to use a new data

  15. Calculating correlated color temperatures across the entire gamut of daylight and skylight chromaticities

    E-Print Network [OSTI]

    Lee Jr., Raymond L.

    Calculating correlated color temperatures across the entire gamut of daylight and skylight daylight and skylight spectra to test an equation that accurately maps CIE 1931 chromaticities x and y by daylight and skylight. 漏 1999 Optical Society of America OCIS codes: 010.1290, 330.1710, 330.1730. 1

  16. Development of a new model to predict indoor daylighting : integration in CODYRUN software and validation

    E-Print Network [OSTI]

    Paris-Sud XI, Universit茅 de

    1 Development of a new model to predict indoor daylighting : integration in CODYRUN software in the scientific literature for determining indoor daylighting values. They are classified in three categories. The originality of our paper relies on the coupling of several simplified models of indoor daylighting

  17. The following VS tools were compared: 2D OPENBABEL, DAYLIGHT2

    E-Print Network [OSTI]

    Ritchie, Dave

    The following VS tools were compared: 2D 颅 OPENBABEL, DAYLIGHT2 , MACCS. BCI, MOLPRINT2D3 3D 颅 ROCS Software Inc., Cepos Insilico Ltd., Chemical Computing Group, DAYLIGHT, Chemical Information Systems and Digital Chemistry for providing Academic Licences for ROCS, ParaSurf, MOE, DAYLIGHT, and BCI, respectively

  18. Daylighting control performance of a thin-film ceramic electrochromic window: field study results

    E-Print Network [OSTI]

    1 Daylighting control performance of a thin-film ceramic electrochromic window: field study results of this emerging technology. Keywords: Building energy-efficiency; Electrochromic windows; Daylighting; Control switched across their dynamic range and could be fully integrated into a complete daylight, glare

  19. AUTOMATING THE SELECTION OF FENESTRATION SYSTEMS TO BEST MEET DAYLIGHTING PERFORMANCE GOALS

    E-Print Network [OSTI]

    AUTOMATING THE SELECTION OF FENESTRATION SYSTEMS TO BEST MEET DAYLIGHTING PERFORMANCE GOALS Lu铆s closer to producing the desired flux distribution from the outdoor daylight distribution. INTRODUCTION The selection of fenestration systems for daylighting is traditionally done by trial and error. Designers try

  20. P5.60B DERIVATION OF DAYLIGHT AND SOLAR IRRADIANCE DATA FROM SATELLITE OBSERVATIONS

    E-Print Network [OSTI]

    Heinemann, Detlev

    P5.60B DERIVATION OF DAYLIGHT AND SOLAR IRRADIANCE DATA FROM SATELLITE OBSERVATIONS A. Hammer, D project SATELLIGHT an attempt is made to use satellite methods to derive daylight and solar irradiance). In daylighting applications, knowledge of the lumi- nance distribution of the sky is of primary concern. Thus

  1. ACTIVITY OF HAWAIIAN REEF FISHES DURING THE EVENING AND MORNING TRANSITIONS BETWEEN DAYLIGHT AND DARKNESS

    E-Print Network [OSTI]

    ACTIVITY OF HAWAIIAN REEF FISHES DURING THE EVENING AND MORNING TRANSITIONS BETWEEN DAYLIGHT inactive at night, the latter mainly inactive in daylight. During active periods their behavior, with the diurnal species mostly inactive in darkness and the nocturnal species mostly inactive in daylight (Hobson

  2. Inverse Modeling Using a Wireless Sensor Network (WSN) for Personalized Daylight Harvesting

    E-Print Network [OSTI]

    Agogino, Alice M.

    Inverse Modeling Using a Wireless Sensor Network (WSN) for Personalized Daylight Harvesting Ryan: predictive: daylight harvesting: piecewise linear regression: building energy efficiency Abstract: Smart light levels, discretized by sub-hourly sun angles. Applied on two days of daylight and ten days

  3. SunCast: Fine-grained Prediction of Natural Sunlight Levels for Improved Daylight Harvesting

    E-Print Network [OSTI]

    Whitehouse, Kamin

    SunCast: Fine-grained Prediction of Natural Sunlight Levels for Improved Daylight Harvesting, USA {jklu,whitehouse}@cs.virginia.edu ABSTRACT Daylight harvesting is the use of natural sunlight to reduce the need for artificial lighting in buildings. The key challenge of daylight harvesting

  4. Robustness of circadian clocks to daylight fluctuations: hints from the picoeucaryote

    E-Print Network [OSTI]

    Lefranc, Marc

    1 Robustness of circadian clocks to daylight fluctuations: hints from the picoeucaryote in daylight intensity on the core circadian oscillator, a type of perturbation that has been rarely considered strategy to shield the circadian clock from daylight fluctuations by localizing coupling to the light

  5. Robustness of circadian clocks to daylight fluctuations: hints from the picoeucaryote

    E-Print Network [OSTI]

    1 Robustness of circadian clocks to daylight fluctuations: hints from the picoeucaryote a strategy to minimize the impact of fluctuations in daylight intensity on the core circadian oscillator daylight fluctuations by localizing coupling to the light during specific time intervals. In our model

  6. Using Simple Light Sensors to Achieve Smart Daylight Harvesting Jiakang Lu, Dagnachew Birru, Kamin Whitehouse

    E-Print Network [OSTI]

    Whitehouse, Kamin

    Using Simple Light Sensors to Achieve Smart Daylight Harvesting Jiakang Lu, Dagnachew Birru, Kamin demonstrate how to improve the effectiveness of daylight harvesting with a sin- gle light sensor on each sky to predict the incoming daylight and set window transparency accordingly. We evaluate our system

  7. Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office

    E-Print Network [OSTI]

    LBNL-6496E Empirical assessment of a prismatic daylight- redirecting window film in a full in Leukos, the journal of the IESNA. Empirical assessment of a prismatic daylight- redirecting window film Laboratory, Mailstop 90-3111, 1 Cyclotron Road, Berkeley, CA 94720 USA Abstract Daylight redirecting systems

  8. Time for a Change? It's not just Daylight Savings Time that should be abolished!

    E-Print Network [OSTI]

    1 Time for a Change? It's not just Daylight Savings Time that should be abolished! Sunday, March 11. It is just that the clocks are set differently! By government edict! I advocate not just abolishing Daylight of time zone and/or daylight savings time confusion. Every clock and wristwatch in the world would show

  9. Robustness of Circadian Clocks to Daylight Fluctuations: Hints from the Picoeucaryote Ostreococcus tauri

    E-Print Network [OSTI]

    Lefranc, Marc

    Robustness of Circadian Clocks to Daylight Fluctuations: Hints from the Picoeucaryote Ostreococcus in daylight intensity on the core circadian oscillator, a type of perturbation that has been rarely considered F, Bouget F-Y, et al. (2010) Robustness of Circadian Clocks to Daylight Fluctuations: Hints from

  10. Annual daylighting performance of a passive optical light shelf in sidelit perimeter zones of

    E-Print Network [OSTI]

    Annual daylighting performance of a passive optical light shelf in sidelit perimeter zones Government or any agency thereof or The Regents of the University of California. #12;1 Annual daylighting use in deep perimeter zones of buildings where the windows are subject to high daylight availability

  11. DARKNESS, TWILIGHT, AND DAYLIGHT FORAGING SUCCESS OF BEARS (URSUS AMERICANUS) ON SALMON

    E-Print Network [OSTI]

    Reimchen, Thomas E.

    DARKNESS, TWILIGHT, AND DAYLIGHT FORAGING SUCCESS OF BEARS (URSUS AMERICANUS) ON SALMON IN COASTAL (2000颅2002). Bears (maximum 7 simultaneously) were primarily active during daylight near the onset with other bears (4%). Scavenging was greatest during daylight (19%) and lowest during darkness (3%). Bears

  12. Singapore's Zero-Energy Building's daylight monitoring system

    SciTech Connect (OSTI)

    Grobe, Lars; Wittkopf, Stephen; Pandey, Anupama Rana; Xiaoming, Yang; Seng, Ang Kian; Scartezzini, Jean-Louis; Selkowitz, Stephen

    2010-02-28T23:59:59.000Z

    A setup to monitor the daylighting performance of different glazing types in Singapore is presented. The glazing is installed in the facade of four dedicated testing chambers in BCAA's Zero Energy Building in Singapore. These test rooms are equipped with sensors that both record illuminances on the work plane, and luminances as seen by occupants. The physical and logical design of the monitoring system is presented. Criteria to assess the daylighting performance are introduced, and initial results of the work in progress are presented.

  13. Analysis of Daylighting Requirements within ASHRAE Standard 90.1

    SciTech Connect (OSTI)

    Athalye, Rahul A.; Xie, YuLong; Liu, Bing; Rosenberg, Michael I.

    2013-08-01T23:59:59.000Z

    Pacific Northwest National Laboratory (PNNL), under the Building Energy Codes Program (BECP) funded by U.S. Department of Energy (DOE), provides support to the ASHRAE/IES/IESNA Standard 90.1(Standard 90.1) Standing Standards Project Committee (SSPC 90.1) and its subcommittees. In an effort to provide the ASHRAE SSPC 90.1 with data that will improve the daylighting and fenestration requirements in the Standard, PNNL collaborated with Heschong Mahone Group (HMG), now part of TRC Solutions. Combining EnergyPlus, a whole-building energy simulation software developed by DOE, with Radiance, a highly accurate illumination modeling software (Ward 1994), the daylighting requirements within Standard 90.1 were analyzed in greater detail. The initial scope of the study was to evaluate the impact of the fraction of window area compared to exterior wall area (window-to-wall ratio (WWR)) on energy consumption when daylighting controls are implemented. This scope was expanded to study the impact of fenestration visible transmittance (VT), electric lighting controls and daylighted area on building energy consumption.

  14. Daylight quantum key distribution over 1.6 km

    E-Print Network [OSTI]

    W. T. Buttler; R. J. Hughes; S. K. Lamoreaux; G. L. Morgan; J. E. Nordholt; C. G. Peterson

    2000-01-25T23:59:59.000Z

    Quantum key distribution (QKD) has been demonstrated over a point-to-point $\\sim1.6$-km atmospheric optical path in full daylight. This record transmission distance brings QKD a step closer to surface-to-satellite and other long-distance applications.

  15. Assessing the Feasibility of Creek Daylighting in San Francisco, Part I: A Synthesis of Lessons Learned from Existing Urban Daylighting Projects

    E-Print Network [OSTI]

    Smith, Brooke Ray

    2007-01-01T23:59:59.000Z

    Factors in Environmental Restoration: Strawberry Creek andBaxter Creek. Water Resource Center Archives, University ofNiazi. 2005. Blackberry Creek Daylighting Project, Berkeley:

  16. The Post-Eruptive Evolution of a Coronal Dimming

    E-Print Network [OSTI]

    Scott W. McIntosh; Robert J. Leamon; Alisdair R. Davey; Meredith J. Wills-Davey

    2007-01-11T23:59:59.000Z

    We discuss the post-eruptive evolution of a "coronal dimming" based on observations of the EUV corona from the Solar and Heliospheric Observatory and the Transition Region and Coronal Explorer. This discussion highlights the roles played by magnetoconvection-driven magnetic reconnection and the global magnetic environment of the plasma in the "filling" and apparent motion of the region following the eruption of a coronal mass ejection (CME). A crucial element in our understanding of the dimming region evolution is developed by monitoring the disappearance and reappearance of bright TRACE "moss" around the active region giving rise to the CME. We interpret the change in the TRACE moss as a proxy of the changing coronal magnetic field topology behind the CME front. We infer that the change in global magnetic topology also results in a shift of energy balance in the process responsible for the production of the moss emission while the coronal magnetic topology evolves from closed, to open and back to closed again because, following the eruption, the moss reforms around the active region in almost exactly its pre-event configuration. As a result of the moss evolution, combining our discussion with recent spectroscopic results of an equatorial coronal hole, we suggest that the interchangeable use of the term "transient coronal hole" to describe a coronal dimming is more than just a simple coincidence.

  17. BIM-Centric Daylight Profiler for Simulation (BDP4SIM): A Methodology for Automated Product Model Decomposition and Recomposition for Climate-Based Daylighting Simulation

    E-Print Network [OSTI]

    Benjamin Welle; Zack Rogers; Martin Fischer; Benjamin Welle A; Zack Rogers B; Martin Fischer

    2012-01-01T23:59:59.000Z

    Flexible problem formulation is required for product model-based thermal analysis using multidisciplinary design optimization (MDO) environments for cost-effectiveness, accuracy, and scalability in the Architecture, Engineering, and Construction (AEC) industry. The integration of daylighting simulation into an MDO process, however, presents several implementation challenges. In current practice, the process of an architect, engineer, or daylighting consultant to determine how to analyze a given building design for daylighting performance is frequently subjective, time-consuming, and inconsistent. Furthermore, long simulation time requirements for daylighting significantly hinder the realization of many benefits from MDO. The determination of which spaces in a building are sufficiently different to warrant an independent daylighting analysis is based primarily on building

  18. Validation of the Algorithms Developed for Preliminary Prediction of Daylight Distribution in a Toplighted Atrium

    E-Print Network [OSTI]

    Boubekri, M.; Atif, M. R.; Boyer, L. L.

    1988-01-01T23:59:59.000Z

    VALIDATION OF THE ALGORITHMS DEVELOPED FOR PRELIMINARY PREDICTION OF DAYLIGHT DISTRIBUTION IN A TOPLIGHTED ATRIUM MOHAMED BOUBEKRI MORAD R. ATIF LESTER L. BOYER PhD Candidate PhD Student PhD, Professor Texas A&M University Texas MM University... to understand daylight distribution throughout an atrium space is essential to produce good designs. Simp1 ified daylight prediction algorithms for preliminary design of top1 ighted atriums under overcast and clear diffuse skies have been developed as part...

  19. Lighting energy savings potential of split-pane electrochromic windows controlled for daylighting with visual comfort

    E-Print Network [OSTI]

    Fernandes, Luis

    2014-01-01T23:59:59.000Z

    Daylight Coefficients, Lighting Research and Technology,America, 1999, The IESNA lighting handbook: reference andcontrol of electric lighting and blinds, Solar Energy, 77(

  20. Daylighting in schools: Improving student performance and health at a price schools can afford: Preprint

    SciTech Connect (OSTI)

    Plympton, P.; Conway, S.; Epstein, K.

    2000-06-14T23:59:59.000Z

    Over the next seven years, at least 5,000 new schools will be designed and constructed to meet the needs of American students in kindergarten through grade 12. National efforts are underway to encourage the use of daylighting, energy efficiency, and renewable energy technologies in school designs, which can significantly enhance the learning environment. Recent rigorous statistical studies, involving 21,000 students in three states, reveal that students perform better in daylit classrooms and indicate the health benefits of daylighting. This paper discusses the evidence regarding daylighting and student performance and development, and presents four case studies of schools that have cost effectively implemented daylighting into their buildings.

  1. Applicability of daylighting computer modeling in real case studies: Comparison between measured and simulated daylight availability and lighting consumption. Building and Environment

    E-Print Network [OSTI]

    A. D. Atif

    this paper is published in / Une version de ce document se trouve dans : IEA (International Energy Agency) Task 21 / Annex 29: Daylight in Buildings, November 1998, 68 pp. www.nrc.ca/irc/ircpubs NRCC-42862 Subtask C: Daylighting Design Tools T21/C1-21/CAN/98-11 Applicability of Daylighting Computer Modeling in Real Case Studies: Comparison between Measured and Simulated Daylight Availability and Lighting Consumption A report of IEA SHC Task 21 / IEA ECBCS Annex 29 Daylight in Buildings Subtask C: Daylighting Design Tools Report T21/C1-21/CAN/98-11 Applicability of Daylighting Computer Modeling in Real Case Studies: Comparison between Measured and Simulated Daylight Availability and Lighting Consumption by Anca D. Galasiu * Morad R. Atif * A report of IEA SHC Task 21 / IEA ECBCS Annex 29 * National Research Council Canada, Institute for Research in Construction, Indoor Environment Research Program Subtask C: Daylighting Design Tools Report T21/C1-21/CAN/98-11 IEA Solar Heating and Cooling Programme (IEA SHC) The International Energy Agency (IEA) was established in 1974 as an autonomous agency within the framework of the Economic Cooperation and Development (OECD) to carry out a comprehensive program of energy cooperation among its 24 member countries and the Commission of the European Communities. An important part of the Agency's program involves collaboration in the research, development and demonstration of new energy technologies to reduce excessive reliance on imported oil, increase long-term energy security and reduce greenhouse gas emissions. The IEA's R&D activities are headed by the Committee on Energy Research and Technology (CERT) and supported by a small Secretariat staff, headquartered in Paris. In addition, three Working Parties are charged with monitorin...

  2. Study of the relationship between indoor daylight environments and patient average length of stay (ALOS) in healthcare facilities

    E-Print Network [OSTI]

    Choi, Joon Ho

    2007-04-25T23:59:59.000Z

    This study investigates how indoor daylight environments affect patient Average Length of Stay (ALOS), by evaluating and analyzing daylight levels in patient rooms in comparison to their ALOS. The patient ALOS data were taken at one general hospital...

  3. A new approach in data visualization to integrate time and space variability of daylighting in the design process

    E-Print Network [OSTI]

    Yi, Lu, S.M. Massachusetts Institute of Technology

    2008-01-01T23:59:59.000Z

    Daylighting design has great impact on the performance and aesthetical quality of a work of architecture but requires many issues to be addressed during the design process. The way existing daylighting tools deliver data ...

  4. Daylight in fa鏰de renewal : using new metrics to inform the retrofitting of aging modern-ear fa鏰de types

    E-Print Network [OSTI]

    Rice, Edward Oren

    2006-01-01T23:59:59.000Z

    New methods for quantifying daylight are increasingly accessible to designers and planners. While these methods have enabled new building facades to better balance the admission of daylight with the maintenance of thermal ...

  5. Nanolens Window Coatings for Daylighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOilNEW HAMPSHIRE BUILDS OFFNanolens Window Coatings for Daylighting

  6. SPECTROSCOPIC ANALYSIS OF AN EIT WAVE/DIMMING OBSERVED BY HINODE/EIS

    SciTech Connect (OSTI)

    Chen, F.; Ding, M. D.; Chen, P. F., E-mail: dmd@nju.edu.c [Department of Astronomy, Nanjing University, Nanjing 210093 (China)

    2010-09-10T23:59:59.000Z

    EUV Imaging Telescope (EIT) waves are a wavelike phenomenon propagating outward from the coronal mass ejection source region, with expanding dimmings following behind. We present a spectroscopic study of an EIT wave/dimming event observed by the Hinode/Extreme-ultraviolet Imaging Spectrometer. Although the identification of the wave front is somewhat affected by the pre-existing loop structures, the expanding dimming is well defined. We investigate the line intensity, width, and Doppler velocity for four EUV lines. In addition to the significant blueshift implying plasma outflows in the dimming region as revealed in previous studies, we find that the widths of all four spectral lines increase at the outer edge of the dimmings. We illustrate that this feature can be well explained by the field line stretching model, which claims that EIT waves are apparently moving brightenings that are generated by the successive stretching of the closed field lines.

  7. Towards Embedded Wireless-Networked Intelligent Daylighting Systems for Commercial Buildings

    E-Print Network [OSTI]

    Agogino, Alice M.

    Towards Embedded Wireless-Networked Intelligent Daylighting Systems for Commercial Buildings Yao, daylighting systems are not widely used in the commercial office building. Barriers prohibiting adoption) `Smart Dust motes' wireless platforms is explored. Due to their small size, they can be placed directly

  8. Overview Models of the Example Space Renderings using the Architectural Daylighting Tool

    E-Print Network [OSTI]

    Camera B; Joshua Nasman; Barbara Cutler

    Our new TUI for architectural daylighting design allows multiple users to a) gather around a physical sketching environment and select from b) a set of wall primitives and window and material markers to c) build a rough sketch of an architectural design. A d) visualization of a daylighting simulation is projected onto these surfaces.

  9. Walking on daylight : the application of translucent floor systems as a means of achieving natural daylighting in mid and low rise architecture

    E-Print Network [OSTI]

    Widder, James

    1985-01-01T23:59:59.000Z

    This thesis is concerned with the introduction of quality daylight to buildings by means of translucency in the horizontal planes or floors within the building. Since people began to build, the concept of translucency in ...

  10. Color and spectral analysis of daylight in southern Javier Hernandez-Andres, Javier Romero, and Juan L. Nieves

    E-Print Network [OSTI]

    Lee Jr., Raymond L.

    Color and spectral analysis of daylight in southern Europe Javier Herna麓ndez-Andre麓s, Javier Romero We have analyzed the colorimetric and spectral characteristics of 2600 daylight spectra (global), luminous efficacies, and relative UV and IR contents of Granada daylight. The chromaticity coordinates

  11. Dynamic daylight control system implementing thin cast arrays of polydimethylsiloxane-based millimeter-scale transparent louvers

    E-Print Network [OSTI]

    Aizenberg, Joanna

    Dynamic daylight control system implementing thin cast arrays of polydimethylsiloxane: Daylight control system Dynamic window system Energy-efficiency Transparent louvers a b s t r a c in standard office buildings. The development of daylight control systems that maximize the penetration

  12. Re: Affordable Textbooks, Fall Semester Update In a message dated 10/28/2010 10:28:50 A.M. Eastern Daylight Time, nicole@studentpirgs.org

    E-Print Network [OSTI]

    Garfunkel, Eric

    .M. Eastern Daylight Time, nicole@studentpirgs.org writes: Hi everyone, There have been some exciting

  13. A CRITICAL REVIEW OF SIMULATION TECHNIQUES FOR DAYLIGHT RESPONSIVE SYSTEMS

    E-Print Network [OSTI]

    L. Doulos; A. Tsangrassoulis; F. Topalis

    * corresponding author Application of lighting control technologies has increased the public interest. Although these technologies have been promoted during the last years their successful use in buildings has been accomplished in a small percentage of new projects. One reason is the difficulty in quantifying the energy savings and thus the subsequent payback period. The majority of existing simulation tools (which are embedded in building energy codes) 杗eeded during initial design- are based on the estimation of the potential energy savings due to daylight. The paper focus on the limitations of current simulation approaches comparing their results, in order to assess their accuracy. For this, special test cases have been developed exploiting their domain of validity.

  14. Energy, Shading and Daylighting Analysis for the Austin Bergstrom International Airport Terminal

    E-Print Network [OSTI]

    Holder, L. M. III; Holder, L. M. IV

    2002-01-01T23:59:59.000Z

    Our firm was under contract with the City of Austin, Texas to perform energy analysis and analysis of the daylighting potential within the New Austin Bergstrom International Airport Terminal. Design of the Passenger Terminal Facility for the New...

  15. Experience of light : the use of an inverse method and a genetic algorithm in daylight design

    E-Print Network [OSTI]

    Chutarat, Acharawan

    2001-01-01T23:59:59.000Z

    Integration of daylight availability in time and architectural space is a critical element in achieving optimal comfort and productivity, as well as in minimizing energy consumption. In recent years, there has been an ...

  16. Time-varied daylighting performance to enable a goal-driven design process

    E-Print Network [OSTI]

    Kleindienst, Si鈔 A. (Si鈔 Alexandra)

    2010-01-01T23:59:59.000Z

    Due to the overwhelming number of decisions to be made during early stage design, there is a need for intuitive methods to communicate data so that it is quickly and easily understood by the designer. In daylighting analysis, ...

  17. A system for optimizing interior daylight distribution using reflective Venetian blinds with independent blind angle control

    E-Print Network [OSTI]

    McGuire, Molly E

    2005-01-01T23:59:59.000Z

    An operational algorithm for blind angle control is developed to optimize the daylighting performance of a system of reflective Venetian blinds. Numerical modeling and experiment confirm that independent control of alternating ...

  18. Form and daylight as a creative medium : Church of John Paul II in South End, Boston

    E-Print Network [OSTI]

    Gruzewski, Jaroslaw

    1992-01-01T23:59:59.000Z

    This thesis is an architectural design project of a Catholic Church dedicated to Pope John Paul II. The main intention of this Thesis is to explore and clearly present daylighting methods and techniques and how important ...

  19. Daylighting techniques used in indigenous buildings in the United Arab Emirates (UAE), an investigative approach

    E-Print Network [OSTI]

    Alnuaimi, Maitha Mohammed

    2009-06-02T23:59:59.000Z

    This study investigated the potential of the daylighting systems used in the indigenous architecture of the United Arab Emirates (UAE), located in Dubai (latitude 25 N longitude 55 E). The analysis tested the lighting performance of three...

  20. Daylighting Design Tools in Atria for Minimum Cooling Loads in Atrium Buildings

    E-Print Network [OSTI]

    Atif, M. R.; Boyer, L. L.; Degelman, L. O.; Claridge, D. E.

    The daylighting and sunlighting value of an atrium are considered the main reasons for including the atrium use in the built environment. However, most atria today are either overlit, which causes tremendous cooling loads, or underlit, requiring...

  1. Daylight Analysis with Microcomputers for School Buildings in a Hot, Humid Climate

    E-Print Network [OSTI]

    Leaver, J.; McQueen, T.

    1987-01-01T23:59:59.000Z

    Daylighting and other passive energy technologies are critical issues that should be considered in the early stages of building planning and architectural design. Both new design and retrofit of existing buildings benefit greatly by use...

  2. An Empirical Study and Analysis of Daylight Penetration Through a Light Plenum

    E-Print Network [OSTI]

    Hill, G. E.; Rowland, D.; Carlson, K.; Karpack, L.

    1985-01-01T23:59:59.000Z

    Lighting accounts for approximately 54% of the annual energy consumption of office buildings, and can effectively be reduced through daylighting. The simplest way to provide day lighting into a typical office space has been to use unilateral...

  3. Daylighting and solar shading performances of an innovative automated reflective louver system

    E-Print Network [OSTI]

    Hashemi, Arman

    2014-08-07T23:59:59.000Z

    follows initial investigations into the design and applicability of an automated retrofitted panel thermal shutters which can also act as a sunshade and daylighting system. The system has a patented function which allows each shutter...

  4. Energy efficient commercial buildings : a study of natural daylighting in the context of adaptive reuse

    E-Print Network [OSTI]

    Crowley, John Stephen

    1982-01-01T23:59:59.000Z

    Daylighting is a powerful design element which can have a dramatic impact on people's perception of space, physical and psychological well-being as well as a building's annual and daily energy requirements. Understanding ...

  5. Impact of Extended Daylight Saving Time on National Energy Consumption Report to Congress

    SciTech Connect (OSTI)

    Belzer, D. B.; Hadley, S. W.; Chin, S-M.

    2008-10-01T23:59:59.000Z

    The Energy Policy Act of 2005 (Pub. L. No. 109-58; EPAct 2005) amended the Uniform Time Act of 1966 (Pub. L. No. 89-387) to increase the portion of the year that is subject to Daylight Saving Time. (15 U.S.C. 260a note) EPAct 2005 extended the duration of Daylight Saving Time in the spring by changing its start date from the first Sunday in April to the second Sunday in March, and in the fall by changing its end date from the last Sunday in October to the first Sunday in November. (15 U.S.C. 260a note) EPAct 2005 also called for the Department of Energy to evaluate the impact of Extended Daylight Saving Time on energy consumption in the United States and to submit a report to Congress. (15 U.S.C. 260a note) This report presents the results of impacts of Extended Daylight Saving Time on the national energy consumption in the United States. The key findings are: (1) The total electricity savings of Extended Daylight Saving Time were about 1.3 Tera Watt-hour (TWh). This corresponds to 0.5 percent per each day of Extended Daylight Saving Time, or 0.03 percent of electricity consumption over the year. In reference, the total 2007 electricity consumption in the United States was 3,900 TWh. (2) In terms of national primary energy consumption, the electricity savings translate to a reduction of 17 Trillion Btu (TBtu) over the spring and fall Extended Daylight Saving Time periods, or roughly 0.02 percent of total U.S. energy consumption during 2007 of 101,000 TBtu. (3) During Extended Daylight Saving Time, electricity savings generally occurred over a three- to five-hour period in the evening with small increases in usage during the early-morning hours. On a daily percentage basis, electricity savings were slightly greater during the March (spring) extension of Extended Daylight Saving Time than the November (fall) extension. On a regional basis, some southern portions of the United States exhibited slightly smaller impacts of Extended Daylight Saving Time on energy savings compared to the northern regions, a result possibly due to a small, offsetting increase in household air conditioning usage. (4) Changes in national traffic volume and motor gasoline consumption for passenger vehicles in 2007 were determined to be statistically insignificant and therefore, could not be attributed to Extended Daylight Saving Time.

  6. An Analysis of Energy Reductions from the Use of Daylighting in Low-Cost Housing

    E-Print Network [OSTI]

    Rungchareonrat, N.

    AN ANALYSIS OF ENERGY REDUCTIONS FROM THE USE OF DAYLIGHTING IN LOW-COST HOUSING A Thesis by NAYARAT RUNGCHAREONRAT Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August 2003 Major Subject: Architecture AN ANALYSIS OF ENERGY REDUCTIONS FROM THE USE OF DAYLIGHTING IN LOW-COST HOUSING A Thesis by NAYARAT RUNGCHAREONRAT...

  7. Cooling Energy and Cost Savings with Daylighting in a Hot and Humid Climate

    E-Print Network [OSTI]

    Arasteh, D.; Johnson, R.; Selkowitz, S.; Connell, D.

    1985-01-01T23:59:59.000Z

    (including glazing) was %eld constant at values consistent with ASHRAE 90 standards. Since the thermal conductance of the glazing (single or dou- ble) exceeds the maximum U , as the glass area increases, the conductance 0% the opaque wall is reduced...- ing to a saturation of useful daylight and no sig- nificant further savings in electric lighting energy. This daylight saturation effect begins at effective apertures between 0.10 and 0.25 for typ- ical curtain wall designs in a perimeter zone...

  8. CLIMATE-BASED DAYLIGHT PERFORMANCE: BALANCING VISUAL AND NON-VISUAL ASPECTS OF LIGHT INPUT

    E-Print Network [OSTI]

    M. Andersen; J. Mardaljevic; Nicolas Roy; Jens Christoffersen

    This study uses a domestic dwelling as the setting to investigate and explore the applicability of daylighting metrics for residential buildings, including the formulation of metrics for nonvisual effects. The simulation approach used to generate the performance data from which the metrics are derived is called climate-based daylight modelling (CBDM). This approach delivers predictions of various luminous quantities using sun and sky conditions that are derived from standardised annual meteorological datasets. Although there are uncertainties regarding the precise calibration, there is now sufficient empirical data to parameterise models that also simulate the non-visual aspects of daylight, e.g. for circadian entrainment and a general sense of ?alertness?. For these non-visual aspects, vertical illuminance at the eye was predicted using a modified climate-based daylight modelling approach. In the paper, we consider what relation there might be between the three aspects of daylight provision and if these relations appear to be complementary or conflicting in nature: for task; to reduce electric lighting usage; and, for non-visual effects. The implications for future building guidelines for daylighting are also discussed.

  9. Assessing the Feasibility of Creek Daylighting in San Francisco, Part II: A Preliminary Analysis of Yosemite Creek

    E-Print Network [OSTI]

    Smith, Brooke Ray

    2007-01-01T23:59:59.000Z

    Lucas. 2006. Islais Creek reinterpreted: An exploration ofwould be triggered? If the creek conveys stormwater runoff,2004. Daylighting Islais Creek: a feasibility study.

  10. From Dimming to Brightening: Decadal Changes in Solar Radiation at Earth's Surface

    SciTech Connect (OSTI)

    Wild, Martin F.; Gilgen, Hans; Roesch, Andreas; Ohmura, Atsumu; Long, Charles N.; Dutton, Ellsworth G.; Forgan, B. W.; Kallis, A.; Russak, V.; Tsvetkov, Anatoly

    2005-05-06T23:59:59.000Z

    Variations in solar radiation incident at Earth's surface profoundly affect the human and terrestrial environment. A decline in solar radiation at land surfaces has become apparent in many observational records up to 1990, a phenomenon known as global dimming. Newly available surface observations from 1990 to the present, primarily from the Northern Hemisphere, show that the dimming did not persist into the 1990s. Instead, a widespread brightening has been observed since the late 1980s. This reversal is reconcilable with changes in cloudiness and atmospheric transmission and may substantially affect surface climate, the hydrological cycle, glaciers, and ecosystems.

  11. Retail Lamps Study 3.1: Dimming, Flicker, and Power Quality Characteristics of LED A Lamps.

    SciTech Connect (OSTI)

    Royer, Michael P.; Poplawski, Michael E.; Brown, Charles C.

    2014-12-14T23:59:59.000Z

    To date, all three reports in the retail lamps series have focused on basic performance parameters, such as lumen output, efficacy, and color quality. This report goes a step further, examining the photoelectric characteristics (i.e., dimming and flicker) of a subset of lamps from CALiPER Retails Lamps Study 3. Specifically, this report focuses on the dimming, power quality, and flicker characteristics of 14 LED A lamps, as controlled by four different retail-available dimmers. The results demonstrate notable variation across the various lamps, but little variation between the four dimmers. Overall, the LED lamps: ~tended to have higher relative light output compared to the incandescent and halogen benchmark at the same dimmer output signal (RMS voltage). The lamps dimming curves (i.e., the relationship between control signal and relative light output) ranged from linear to very similar to the square-law curve typical of an incandescent lamp. ~generally exhibited symmetrical behavior梩he same dimming curve梬hen measured proceeding from maximum to minimum or minimum to maximum control signal. ~mostly dimmed below 10% of full light output, with some exceptions for specific lamp and dimmer combinations ~exhibited a range of flicker characteristics, with many comparing favorably to the level typical of a magnetically-ballasted fluorescent lamp through at least a majority of the dimming range. ~ always exceeded the relative (normalized) efficacy over the dimming range of the benchmark lamps, which rapidly decline in efficacy when they are dimmed. This report generally does not attempt to rank the performance of one product compared to another, but instead focuses on the collective performance of the group versus conventional incandescent or halogen lamps, the performance of which is likely to be the baseline for a majority of consumers. Undoubtedly, some LED lamps perform better梠r more similar to conventional lamps梩han others. Some perform desirably for one characteristic, but not others. Consumers (and specifiers) may have a hard time distinguishing better-performing lamps from one another; at this time, physical experimentation is likely the best evaluation tool.

  12. Effectiveness of External Window Attachments Based on Daylight Utilization and Cooling Load Reduction for Small Office Buildings in Hot Humid Climates

    E-Print Network [OSTI]

    Soebarto, V. I.; Degelman, L. O.

    1994-01-01T23:59:59.000Z

    reduce the amount of the daylight needed to supplement interior lighting. Therefore the objective of this study was to explore which strategy would give a balance between solar heat gain reduction and daylight utilization and result in the most energy...

  13. CITI Program Website Downtime for Software Upgrade Starting Monday 29 July at 11 a.m. U.S. Eastern Daylight Time, the CITI Program website will be

    E-Print Network [OSTI]

    .S. Eastern Daylight Time, the CITI Program website will be unavailable for approximately two to three days

  14. BUILDING RESEARCH & INFORMATION (2008) Paper in press (mock proof) expected to appear in Vol 36 No 6 (Nov 2008) An intuitive daylighting performance

    E-Print Network [OSTI]

    Varela, Carlos

    No 6 (Nov 2008) An intuitive daylighting performance analysis and optimization approach M. Andersen1 of daylighting considerations into the design process requires many issues to be addressed simultaneously quantitative and qualitative performance criteria using daylighting analysis data in various forms

  15. CLTC is a not-for-profit research, development and demonstration facility leading innovations in energy-efficient lighting and daylighting technologies.

    E-Print Network [OSTI]

    California at Davis, University of

    in energy-efficient lighting and daylighting technologies. Collaborating with partners in government common ways CLTC utilizes funding to advance the science of energy-efficient lighting and daylighting and field test emerging lighting and daylighting technologies. Demonstrations help vet the performance

  16. Evaluation of the Daylight Cycle of Model-Predicted Cloud Amount and Condensed Water Path over Europe with Observations from MSG SEVIRI

    E-Print Network [OSTI]

    Stoffelen, Ad

    Evaluation of the Daylight Cycle of Model-Predicted Cloud Amount and Condensed Water Path over accurate information on diurnal cycles during daylight hours of cloud properties over land and ocean surfaces. This paper evaluates the daylight cycle of CA and CWP as predicted by the Regional Atmospheric

  17. Issues, Models and Solutions for Triac Modulated Phase Dimming of LED Lamps

    E-Print Network [OSTI]

    Lehman, Brad

    Issues, Models and Solutions for Triac Modulated Phase Dimming of LED Lamps Dustin Rand (Raytheon Edison socket LED lamps directly from residential phase modulated dimmer switches. In order to explain brightness "White Light" LEDs have experts predicting that the "bright white replacement lamp" could trigger

  18. Dim Light at Night Increases Immune Function in Nile Grass Rats, a Diurnal Rodent

    E-Print Network [OSTI]

    Nelson, Randy J.

    Dim Light at Night Increases Immune Function in Nile Grass Rats, a Diurnal Rodent Laura K. Fonken lighting during the 20th century, human and nonhuman animals became exposed to high levels of light significant implications for certain ecological niches because of the important influence light exerts

  19. Impact of global dimming and brightening on global warming Martin Wild,1

    E-Print Network [OSTI]

    Fischlin, Andreas

    Impact of global dimming and brightening on global warming Martin Wild,1 Atsumu Ohmura,1 and Knut February 2007. [1] Speculations on the impact of variations in surface solar radiation on global warming was responsible for the observed warming. To disentangle surface solar and greenhouse influences on global warming

  20. Impact of Fixed Exterior Shading on Daylighting: A Case Study of the David Brower Center

    E-Print Network [OSTI]

    Zelenay, Krystyna

    2011-01-01T23:59:59.000Z

    blind systems were always lowered and seasonally adjusted (continued on next page) MS Thesis,Thesis, Dept. of Architecture, UC Berkeley 2011 http://escholarship.org/uc/item/1mq5k9mw blinds,blinds frequently enough to take advantage of daylighting. 14 While MS Thesis,

  1. DOES DAYLIGHT SAVING TIME SAVE ENERGY? EVIDENCE FROM A NATURAL EXPERIMENT IN INDIANA

    E-Print Network [OSTI]

    Kotchen, Matthew J.

    electricity bills. We also estimate social costs of increased pollution emissions between $1.7 to $5.5 million implemented a DST policy, with the aim of reducing demand for electrical lighting to free up more coal to estimate the effect of daylight saving time (DST) on residential electricity consumption. Our main finding

  2. Evaluation of Lightshelf Daylighting Systems for Office Buildings in Hot Climates

    E-Print Network [OSTI]

    Abdulmohsen, A.; Boyer, L. L.; Degelman, L. O.

    1994-01-01T23:59:59.000Z

    and heat by shading view apertures below the shelf to reduce solar heat gain and glare and by reflecting light deep into the space through the daylight aperture above the shelf. It also investigates how to provide view with good interior lighting in terms...

  3. Monitored Energy Performance of Electrochromic Windows Controlledfor Daylight and Visual Comfort

    SciTech Connect (OSTI)

    Lee, Eleanor S.; DiBartolomeo, Dennis L.; Klems, Joseph; Yazdanian, Mehry; Selkowitz, Stephen E.

    2005-09-23T23:59:59.000Z

    A 20-month field study was conducted to measure the energy performance of south-facing large-area tungsten-oxide absorptive electrochromic (EC) windows with a broad switching range in a private office setting. The EC windows were controlled by a variety of means to bring in daylight while minimizing window glare. For some cases, a Venetian blind was coupled with the EC window to block direct sun. Some tests also involved dividing the EC window wall into zones where the upper EC zone was controlled to admit daylight while the lower zone was controlled to prevent glare yet permit view. If visual comfort requirements are addressed by EC control and Venetian blinds, a 2-zone EC window configuration provided average daily lighting energy savings of 10 {+-} 15% compared to the reference case with fully lowered Venetian blinds. Cooling load reductions were 0 {+-} 3%. If the reference case assumes no daylighting controls, lighting energy savings would be 44 {+-} 11%. Peak demand reductions due to window cooling load, given a critical demand-response mode, were 19-26% maximum on clear sunny days. Peak demand reductions in lighting energy use were 0% or 72-100% compared to a reference case with and without daylighting controls, respectively. Lighting energy use was found to be very sensitive to how glare and sun is controlled. Additional research should be conducted to fine-tune EC control for visual comfort based on solar conditions so as to increase lighting energy savings.

  4. ONE-DIMENSIONAL MODELING FOR TEMPERATURE-DEPENDENT UPFLOW IN THE DIMMING REGION OBSERVED BY HINODE/EUV IMAGING SPECTROMETER

    SciTech Connect (OSTI)

    Imada, S.; Shimizu, T. [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, 3-1-1 Yoshinodai, Chuo-ku, Sagamihara-shi, Kanagawa 252-5210 (Japan); Hara, H.; Watanabe, T. [National Astronomical Observatory of Japan, 2-21-1 Osawa, Mitaka-shi, Tokyo 181-8588 (Japan); Murakami, I. [National Institute for Fusion Science, 322-6 Oroshi-cho, Toki, Gifu 509-5292 (Japan); Harra, L. K. [UCL-Mullard Space Science Laboratory, Holmbury St Mary, Dorking, Surrey, RH5 6NT (United Kingdom); Zweibel, E. G. [Department of Astronomy, University of Wisconsin-Madison, 475 N Charter Street, Madison, WI 53706 (United States)

    2011-12-10T23:59:59.000Z

    We previously found a temperature-dependent upflow in the dimming region following a coronal mass ejection observed by the Hinode EUV Imaging Spectrometer (EIS). In this paper, we reanalyzed the observations along with previous work on this event and provided boundary conditions for modeling. We found that the intensity in the dimming region dramatically drops within 30 minutes from the flare onset, and the dimming region reaches the equilibrium stage after {approx}1 hr. The temperature-dependent upflows were observed during the equilibrium stage by EIS. The cross-sectional area of the flux tube in the dimming region does not appear to expand significantly. From the observational constraints, we reconstructed the temperature-dependent upflow by using a new method that considers the mass and momentum conservation law and demonstrated the height variation of plasma conditions in the dimming region. We found that a super-radial expansion of the cross-sectional area is required to satisfy the mass conservation and momentum equations. There is a steep temperature and velocity gradient of around 7 Mm from the solar surface. This result may suggest that the strong heating occurred above 7 Mm from the solar surface in the dimming region. We also showed that the ionization equilibrium assumption in the dimming region is violated, especially in the higher temperature range.

  5. D i i f S t i bilit i th B ilt E i tDesigning for Sustainability in the Built Environment Exterior Facade Design for Maximum Daylighting and Solar Power

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Facade Design for Maximum Daylighting and Solar Power GenerationGeneration A frank assessment of issues "...the art and science of daylighting is not so much about how to provide enough daylighting as how to do LIGHTING CHARACTER DUE TO DAYLIGHT VARIABILITY 路 PSYCHOLOGICAL BENEFITS OF路 PSYCHOLOGICAL BENEFITS

  6. Dimming LEDs with Phase-Cut Dimmers: The Specifier's Process for Maximizing Success

    SciTech Connect (OSTI)

    Miller, Naomi J.; Poplawski, Michael E.

    2013-10-01T23:59:59.000Z

    This report reviews how phase-cut dimmers work, how LEDs differ from the incandescent lamps that the dimmers were historically designed to control, and how these differences can lead to complications when trying to dim LEDs. Compatibility between a specific LED source and a specific phase-cut dimmer is often unknown and difficult to assess, and ensuring compatibility adds complexity to the design, specification, bidding, and construction observation phases for new buildings and major remodel projects. To maximize project success, this report provides both general guidance and step-by-step procedures for designing phase-controlled LED dimming on both new and existing projects, as well as real-world examples of how to use those procedures.

  7. Space, light, and time : prospective analysis of Circadian illumination for health-based daylighting with applications to healthcare architecture

    E-Print Network [OSTI]

    Pechacek, Christopher S. (Christopher Scott)

    2008-01-01T23:59:59.000Z

    Light in architecture can be studied for its objective or perceptual effects. This thesis describes an objective link between human health and architectural design. Specifically, the link between daylight and human circadian ...

  8. Acceleration of the matrix multiplication of Radiance three phase daylighting simulations with parallel computing on heterogeneous hardware of personal computer

    SciTech Connect (OSTI)

    University of Miami; Zuo, Wangda; McNeil, Andrew; Wetter, Michael; Lee, Eleanor S.

    2013-04-30T23:59:59.000Z

    Building designers are increasingly relying on complex fenestration systems to reduce energy consumed for lighting and HVAC in low energy buildings. Radiance, a lighting simulation program, has been used to conduct daylighting simulations for complex fenestration systems. Depending on the configurations, the simulation can take hours or even days using a personal computer. This paper describes how to accelerate the matrix multiplication portion of a Radiance three-phase daylight simulation by conducting parallel computing on heterogeneous hardware of a personal computer. The algorithm was optimized and the computational part was implemented in parallel using OpenCL. The speed of new approach was evaluated using various daylighting simulation cases on a multicore central processing unit and a graphics processing unit. Based on the measurements and analysis of the time usage for the Radiance daylighting simulation, further speedups can be achieved by using fast I/O devices and storing the data in a binary format.

  9. To be submitted to Solar Energy. Daylight performance of a microstructured prismatic window film in deep open

    E-Print Network [OSTI]

    To be submitted to Solar Energy. Daylight performance of a microstructured prismatic window film Systems Department, Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory with vertical windows have the potential to offset lighting energy use in deep perimeter zones

  10. Origins of Analysis Methods Used to Design High Performance Commercial Buildings: Part III, Lighting and Daylighting Simulation

    E-Print Network [OSTI]

    Oh, S.; Haberl, J.S.

    Origins of analysis methods used to design high performance commercial buildings: Part III, Lighting and daylighting simulation Sukjoon Oh Jeff S. Haberl Student Member ASHRAE Fellow ASHRAE This study is the third part of the review... methods used in lighting and daylighting simulation programs are described. In companion papers, the origins of the analysis methods of whole-building energy and solar energy analysis programs are reviewed(Oh and Haberl 2014a, 2014b). Introduction...

  11. Practical free-space quantum key distribution over 10 km in daylight and at night

    E-Print Network [OSTI]

    Richard J. Hughes; Jane E. Nordholt; Derek Derkacs; Charles G. Peterson

    2002-06-14T23:59:59.000Z

    We have demonstrated quantum key distribution (QKD) over a 10-km, 1-airmass atmospheric range during daylight and at night. Secret random bit sequences of the quality required for the cryptographic keys used to initialize secure communications devices were transferred at practical rates with realistic security. By identifying the physical parameters that determine the system's secrecy efficiency, we infer that free-space QKD will be practical over much longer ranges under these and other atmospheric and instrumental conditions.

  12. Minimizing lighting power density in office rooms equipped with Anidolic Daylighting Systems

    SciTech Connect (OSTI)

    Linhart, Friedrich; Scartezzini, Jean-Louis [Solar Energy and Building Physics Laboratory (LESO-PB), Ecole Polytechnique Federale de Lausanne (EPFL), 1015 Lausanne (Switzerland)

    2010-04-15T23:59:59.000Z

    Electric lighting is responsible for up to one third of an office building's electricity needs. Making daylight more available in office buildings can not only contribute to significant energy savings but also enhance the occupants' performance and wellbeing. Anidolic Daylighting Systems (ADS) are one type of very effective facade-integrated daylighting systems. All south-facing office rooms within the LESO solar experimental building in Lausanne (Switzerland) are equipped with a given type of ADS. A recent study has shown that these offices' occupants are highly satisfied with their lighting environment. The most energy-efficient south-facing offices have a lighting power density of less than 5W/m{sup 2}. The lighting situation within these ''best practice''-offices has been assessed using the lighting simulation software RELUX Vision. Because this lighting situation is very much appreciated by the occupants, it was used as a starting point for developing even more energy-efficient office lighting designs. Two new lighting designs, leading to lighting power densities of 3.9W/m{sup 2} and 3W/m{sup 2}, respectively, have been suggested and simulated with RELUX Vision. Simulation results have shown that the expected performances of these new systems are comparable to that of the current lighting installation within the ''best practice''-offices or even better. These simulation results have been confirmed during experiments on 20 human subjects in a test office room recently set up within the LESO building. This article gives engineers, architects and light planers valuable information and ideas on how to design energy-efficient and comfortable electric lighting systems in office rooms with abundant access to daylight. (author)

  13. EMERGING DIMMINGS OF ACTIVE REGIONS OBSERVED BY THE SOLAR DYNAMICS OBSERVATORY

    SciTech Connect (OSTI)

    Zhang Jun; Yang Shuhong [Key Laboratory of Solar Activity, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012 (China); Liu Yang; Sun Xudong, E-mail: zjun@nao.cas.cn, E-mail: shuhongyang@nao.cas.cn, E-mail: yliu@sun.stanford.edu, E-mail: xudong@sun.stanford.edu [W. W. Hansen Experimental Physics Laboratory, Stanford University, Stanford, CA 94305-4085 (United States)

    2012-12-01T23:59:59.000Z

    Using the observations from the Atmospheric Imaging Assembly and the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory, we statistically investigate the emerging dimmings (EDs) of 24 isolated active regions (IARs) from 2010 June to 2011 May. All the IARs show EDs in lower-temperature lines (e.g., 171 A) at their early emerging stages. Meanwhile, in higher temperature lines (e.g., 211 A), the ED regions brighten continuously. There are two types of EDs: fan-shaped and halo-shaped. There are 19 fan-shaped EDs and 5 halo-shaped ones. The EDs appear to be delayed by several to more than ten hours relative to the first emergence of the IARs. The shortest delay is 3.6 hr and the longest is 19.0 hr. The EDs last from 3.3 hr to 14.2 hr, with a mean duration of 8.3 hr. Before the appearance of the EDs, the emergence rate of the magnetic flux of the IARs is between 1.2 Multiplication-Sign 10{sup 19} Mx hr{sup -1} to 1.4 Multiplication-Sign 10{sup 20} Mx hr{sup -1}. The larger the emergence rate is, the shorter the delay time is. While the dimmings appear, the magnetic flux of the IARs ranges from 8.8 Multiplication-Sign 10{sup 19} Mx to 1.3 Multiplication-Sign 10{sup 21} Mx. These observations imply that the reconfiguration of the coronal magnetic fields due to reconnection between the newly emerging flux and the surrounding existing fields results in a new thermal distribution which leads to a dimming for the cooler channel (171 A) and brightening in the warmer channels.

  14. On the Use of Integrated Daylighting and Energy Simulations to Drive the Design of a Large Net-Zero Energy Office Building: Preprint

    SciTech Connect (OSTI)

    Guglielmetti, R.; Pless, S.; Torcellini, P.

    2010-08-01T23:59:59.000Z

    This paper illustrates the challenges of integrating rigorous daylight and electric lighting simulation data with whole-building energy models, and defends the need for such integration to achieve aggressive energy savings. Through a case study example, we examine the ways daylighting -- and daylighting simulation -- drove the design of a large net-zero energy project. We give a detailed review of the daylighting and electric lighting design process for the National Renewable Energy Laboratory's Research Support Facility (RSF), a 220,000 ft2 net-zero energy project the author worked on as a daylighting consultant. A review of the issues involved in simulating and validating the daylighting performance of the RSF will be detailed, including daylighting simulation, electric lighting control response, and integration of Radiance simulation data into the building energy model. Daylighting was a key strategy in reaching the contractual energy use goals for the RSF project; the building's program, layout, orientation and interior/furniture design were all influenced by the daylighting design, and simulation was critical in ensuring these many design components worked together in an integrated fashion, and would perform as required to meet a very aggressive energy performance goal, as expressed in a target energy use intensity.

  15. --No Title--

    Broader source: Energy.gov (indexed) [DOE]

    of the facility is scheduled to begin in the fall of 2011. Project Activity: "Daylight Sensors for Dimming lights Daylight sensors currently exist in the design to allow...

  16. The effect of temperature anisotropy on observations of Doppler dimming and pumping in the inner corona

    E-Print Network [OSTI]

    Xing Li; Shadia Rifai Habbal; John Kohl; Giancarlo Noci

    1998-05-04T23:59:59.000Z

    Recent observations of the spectral line profiles and intensity ratio of the O VI 1032 {\\AA} and 1037.6 {\\AA} doublet by the Ultraviolet Coronagraph Spectrometer (UVCS) on the Solar and Heliospheric Observatory (SOHO), made in coronal holes below 3.5 $R_s$, provide evidence for Doppler dimming of the O VI 1037.6 {\\AA} line and pumping by the chromospheric C II 1037.0182 {\\AA} line. Evidence for a significant kinetic temperature anisotropy of O$^{5+}$ ions was also derived from these observations. We show in this Letter how the component of the kinetic temperature in the direction perpendicular to the magnetic field, for both isotropic and anisotropic temperature distributions, affects both the amount of Doppler dimming and pumping. Taking this component into account, we further show that the observation that the O VI doublet intensity ratio is less than unity can be accounted for only if pumping by C II 1036.3367 {\\AA} in addition to C II 1037.0182 {\\AA} is in effect. The inclusion of the C II 1036.3367 {\\AA} pumping implies that the speed of the O$^{5+}$ ions can reach 400 km/s around 3 $R_s$ which is significantly higher than the reported UVCS values for atomic hydrogen in polar coronal holes. These results imply that oxygen ions flow much faster than protons at that heliocentric distance.

  17. Plasma lighting, fiber optics, and daylight collectors: Toward the next revolution in high-efficiency illumination

    SciTech Connect (OSTI)

    Audin, L. [Columbia Univ., New York, NY (United States)

    1995-06-01T23:59:59.000Z

    Combining three recently marketed innovations may provide the next revolution in illumination, making many other recent advances eventually obsolete. The first is plasma lighting, pioneered by Fusion Lighting Inc. of Rockville, Maryland, and first commercially applied by Hutchins International Ltd. of Mississauga, Ontario. This microwave-generated light source yields very high-quality light with efficacies at or beyond high intensity discharge (HID) lamps. The source uses no mercury, thus eliminating lamp disposal problems, and has no cathode, thereby providing very long lamp life. Using no phosphors, it also has very short start and re-strike periods, and is dimmable. The second innovation is in the distribution of light. Commercial developments in fiber optics and light guides now provide products that transfer light from a remote point and distribute it like standard light fixtures. Advances in fiber optic communications and applications to decorative lighting have supplied relatively economical systems for mounting and directing light from both electric light sources and the sun. The third advance is a result of efforts to harness daylight. Unlike architectural daylighting that directs sunlight into perimeter areas through glazing, daylight collectors are roof-mounted devices that supply light to interior and underground spaces through hollow columns and open chases. Aided by improvements and cost reductions in sun-tracking (i.e., heliostatic) controls that capture and concentrate sunlight, such collectors offer a source of free light to locations that might otherwise never receive it. When combined together, these three options could offer a centralized building lighting system that pipes lumens to distribution devices replacing many existing lamps and fixtures.

  18. Simulating the Daylight Performance of Complex Fenestration Systems Using Bidirectional Scattering Distribution Functions within Radiance

    SciTech Connect (OSTI)

    Ward, Gregory; Mistrick, Ph.D., Richard; Lee, Eleanor; McNeil, Andrew; Jonsson, Ph.D., Jacob

    2011-01-21T23:59:59.000Z

    We describe two methods which rely on bidirectional scattering distribution functions (BSDFs) to model the daylighting performance of complex fenestration systems (CFS), enabling greater flexibility and accuracy in evaluating arbitrary assemblies of glazing, shading, and other optically-complex coplanar window systems. Two tools within Radiance enable a) efficient annual performance evaluations of CFS, and b) accurate renderings of CFS despite the loss of spatial resolution associated with low-resolution BSDF datasets for inhomogeneous systems. Validation, accuracy, and limitations of the methods are discussed.

  19. --No Title--

    Broader source: Energy.gov (indexed) [DOE]

    fixtures. Dimming of the fixtures in the dayrooms and inmate cells in response to daylight or space usage would release energy savings. Dimming ballasts will need to be...

  20. Key word:Daylight Factor Window Wall Ratio Pendentive dome Lighting design Tropical region Architecture and Interior design

    E-Print Network [OSTI]

    Mehrdad Mazloomi

    Abstract: Daylighting design plays important role in architecture of religious buildings such as churches and mosques where pendentive dome construction is frequently used. In daylighting design, many designers face difficulty in estimating the interior share of light which is usually expressed by daylight factor due to complexity of interior form. This study aims to provide designers with a rather high precision rule of thumb for average daylight factor in pendentive dome building. Thus, it investigates the Daylight Factor [DF] distribution of such buildings with reference to the tropics. It takes the Window Wall Ratio [WWR] into account and seeks its influence on daylight factor. By a 12 X 12 points grid, it examines five different ratios including 0.1, 0.2, 0.3, 0.4 and 0.5 on DF of the floor beneath the dome. The results endorse the direct relation of WWR and DF. The least WWR equal to 0.1 yields an average DF of 0.55 % while the greatest WWR of 0.5 yields in average DF of 2.56%. The intermediate WWR in steps of 0.2, 0.3 and 0.4 correspond to 1.04, 1.56 and 2.07 percent respectively. As a relatively precise rule of thumb, any increment in consequent steps of WWR with 0.1 intervals results in 0.5 % increase in DF. This can be employed by architects and interior designers for lighting design of pendentive dome buildings in tropical region.

  1. Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office testbed

    SciTech Connect (OSTI)

    Thanachareonkit, Anothai; Lee, Eleanor S.; McNeil, Andrew

    2013-08-31T23:59:59.000Z

    Daylight redirecting systems with vertical windows have the potential to offset lighting energy use in deep perimeter zones. Microstructured prismatic window films can be manufactured using low-cost, roll-to-roll fabrication methods and adhered to the inside surface of existing windows as a retrofit measure or installed as a replacement insulating glass unit in the clerestory portion of the window wall. A clear film patterned with linear, 50-250 micrometer high, four-sided asymmetrical prisms was fabricated and installed in the south-facing, clerestory low-e, clear glazed windows of a full-scale testbed facility. Views through the film were distorted. The film was evaluated in a sunny climate over a two-year period to gauge daylighting and visual comfort performance. The daylighting aperture was small (window-towall ratio of 0.18) and the lower windows were blocked off to isolate the evaluation to the window film. Workplane illuminance measurements were made in the 4.6 m (15 ft) deep room furnished as a private office. Analysis of discomfort glare was conducted using high dynamic range imaging coupled with the evalglare software tool, which computes the daylight glare probability and other metrics used to evaluate visual discomfort. The window film was found to result in perceptible levels of discomfort glare on clear sunny days from the most conservative view point in the rear of the room looking toward the window. Daylight illuminance levels at the rear of the room were significantly increased above the reference window condition, which was defined as the same glazed clerestory window but with an interior Venetian blind (slat angle set to the cut-off angle), for the equinox to winter solstice period on clear sunny days. For partly cloudy and overcast sky conditions, daylight levels were improved slightly. To reduce glare, the daylighting film was coupled with a diffusing film in an insulating glazing unit. The diffusing film retained the directionality of the redirected light spreading it within a small range of outgoing angles. This solution was found to reduce glare to imperceptible levels while retaining for the most part the illuminance levels achieved solely by the daylighting film.

  2. Daylighting design analysis. Project status report No. 2, 1 March-31 December 1980. [For pre-engineered metal buildings

    SciTech Connect (OSTI)

    Hallagan, W.B.; Lindsey, L.L.; Snyder, M.K.

    1980-01-01T23:59:59.000Z

    Detailed scale model studies regarding daylighting aspects of the passive/hybrid solar test building located at Butler Research Center in Grandview, MO are discussed. The product development program is aimed at providing passive/hybrid system building alternatives for commercial, industrial, and community purchasers of Butler's Landmark pre-engineered metal buildings. Occasioned by recognition, early in the project, that daylighting could strongly influence annual energy consumption in buildings of the targetted use types, scale models of several alternative design configurations, including that of the test building in Grandview, were built and tested. The major design alternatives, test results, and conclusions to date are described.

  3. DOE Publishes CALiPER Report on Dimming, Flicker, and Power Quality Characteristics of LED PAR38 Lamps

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's CALiPER program has released Report 20.2, which is part of a series of investigations on LED PAR38 lamps. Report 20.2 focuses on dimming, flicker, and power quality...

  4. An experimental setup to evaluate the daylighting performance of an advanced optical light pipe for deep-plan office buildings

    E-Print Network [OSTI]

    Martins Mogo de Nadal, Betina Gisela

    2005-11-01T23:59:59.000Z

    This research focuses on an advanced optical light pipe daylighting system as a means to deliver natural light at the back of deep-plan office buildings (15ft to 30ft), using optimized geometry and high reflective materials. The light pipe...

  5. FAST EXTREME-ULTRAVIOLET DIMMING ASSOCIATED WITH A CORONAL JET SEEN IN MULTI-WAVELENGTH AND STEREOSCOPIC OBSERVATIONS

    SciTech Connect (OSTI)

    Lee, K.-S.; Moon, Y.-J.; Lee, Jin-Yi [Department of Astronomy and Space Science, Kyung Hee University, Yongin 446-701 (Korea, Republic of)] [Department of Astronomy and Space Science, Kyung Hee University, Yongin 446-701 (Korea, Republic of); Innes, D. E. [Max Plank Institute for Solar System Research, D-37191 Katlenburg-Lindau (Germany)] [Max Plank Institute for Solar System Research, D-37191 Katlenburg-Lindau (Germany); Shibata, K. [Kwasan and Hida Observatories, Kyoto University, Yamashina, Kyoto 607-8471 (Japan)] [Kwasan and Hida Observatories, Kyoto University, Yamashina, Kyoto 607-8471 (Japan); Park, Y.-D., E-mail: lksun@khu.ac.kr [Solar and Space Weather Research Group, Korea Astronomy and Space Science Institute, Daejeon 305-348 (Korea, Republic of)

    2013-03-20T23:59:59.000Z

    We have investigated a coronal jet observed near the limb on 2010 June 27 by the Hinode/X-Ray Telescope (XRT), EUV Imaging Spectrograph (EIS), and Solar Optical Telescope (SOT), and by the Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA), and on the disk by STEREO-A/EUVI. From EUV (AIA and EIS) and soft X-ray (XRT) images we have identified both cool and hot jets. There was a small loop eruption seen in Ca II images of the SOT before the jet eruption. We found that the hot jet preceded its associated cool jet by about 2 minutes. The cool jet showed helical-like structures during the rising period which was supported by the spectroscopic analysis of the jet's emission. The STEREO observation, which enabled us to observe the jet projected against the disk, showed dimming at 195 A along a large loop connected to the jet. We measured a propagation speed of {approx}800 km s{sup -1} for the dimming front. This is comparable to the Alfven speed in the loop computed from a magnetic field extrapolation of the photospheric field measured five days earlier by the SDO/Helioseismic and Magnetic Imager, and the loop densities obtained from EIS Fe XIV {lambda}264.79/274.20 line ratios. We interpret the dimming as indicating the presence of Alfvenic waves initiated by reconnection in the upper chromosphere.

  6. The use of daylight in the design of a controlled environment for food production in the Caribbean and other equatorial climates

    E-Print Network [OSTI]

    Charles, Curtis B

    1989-01-01T23:59:59.000Z

    This thesis addresses the use of daylight in the design of a controlled environment for food production in the Caribbean and other Equatorial climates. An expanding population has put a tremendous burden on the food ...

  7. Experimental and Simulation Study on the Performance of Daylighting in an Industrial Building and its Energy Saving Potential

    E-Print Network [OSTI]

    Chen, Qingyan "Yan"

    for office buildings, but were limited for industrial buildings, where lighting is a major electricity [2]. For office buildings, artificial lighting consumes about 20-35% of the total building with EnergyPlus simulation program. The electricity saving potential for the On/Off control and the dimming

  8. Roof aperture system for selective collection and control of solar energy for building heating, cooling and daylighting

    DOE Patents [OSTI]

    Sanders, William J. (Kansas City, KS); Snyder, Marvin K. (Overland Park, KS); Harter, James W. (Independence, MO)

    1983-01-01T23:59:59.000Z

    The amount of building heating, cooling and daylighting is controlled by at least one pair of solar energy passing panels, with each panel of the pair of panels being exposed to a separate direction of sun incidence. A shutter-shade combination is associated with each pair of panels and the shutter is connected to the shade so that rectilinear movement of the shutter causes pivotal movement of the shade.

  9. Energy Use Intensity and its Influence on the Integrated Daylighting Design of a Large Net Zero Energy Building: Preprint

    SciTech Connect (OSTI)

    Guglielmetti , R.; Scheib, J.; Pless, S. D.; Torcellini , P.; Petro, R.

    2011-03-01T23:59:59.000Z

    Net-zero energy buildings generate as much energy as they consume and are significant in the sustainable future of building design and construction. The role of daylighting (and its simulation) in the design process becomes critical. In this paper we present the process the National Renewable Energy Laboratory embarked on in the procurement, design, and construction of its newest building, the Research Support Facility (RSF) - particularly the roles of daylighting, electric lighting, and simulation. With a rapid construction schedule, the procurement, design, and construction had to be tightly integrated; with low energy use. We outline the process and measures required to manage a building design that could expect to operate at an efficiency previously unheard of for a building of this type, size, and density. Rigorous simulation of the daylighting and the electric lighting control response was a given, but the oft-ignored disconnect between lighting simulation and whole-building energy use simulation had to be addressed. The RSF project will be thoroughly evaluated for its performance for one year; preliminary data from the postoccupancy monitoring efforts will also be presented with an eye toward the current efficacy of building energy and lighting simulation.

  10. HINODE/XRT AND STEREO OBSERVATIONS OF A DIFFUSE CORONAL 'WAVE'-CORONAL MASS EJECTION-DIMMING EVENT

    SciTech Connect (OSTI)

    Attrill, Gemma D. R.; Engell, Alexander J.; Wills-Davey, Meredith J.; Grigis, Paolo; Testa, Paola [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States)

    2009-10-20T23:59:59.000Z

    We report on observations of the first diffuse coronal wave detected by Hinode/XRT. The event occurred near the west solar limb on 2007 May 23, originating from active region (AR) 10956 and was associated with a coronal mass ejection (CME) and coronal dimmings. The bright emission forming the coronal wave expanded predominantly to the east and south of the AR. We use X-Ray Telescope (XRT) and STEREO Behind (B) data combined with a potential magnetic field extrapolation to derive an understanding of the global magnetic field connectivity. We attribute the brightening to the east of the AR to compression and channeling of the plasma along large-scale loops. The brightening to the south of the AR expands across the quiet Sun, making the southern component a likely candidate for identification as a diffuse coronal wave. We analyze the bright front in STEREO/EUVI (B) 171, 195, and 284 A images, as well as in XRT data, finding the strongest components to be largely cospatial in all bandpasses. We also exploit the near-limb location of this event by combining STEREO/COR1 and Extreme Ultra-Violet Imaging Telescope (EUVI) data. Using all the data, we derive a full picture of the low-coronal development of the eruption. The COR1 data show that the southernmost outer edge of the CME is progressively displaced southward during the expansion. EUVI data below the COR1 occulting disk show that the CME is significantly distorted in the low corona as a result of the associated filament eruption. The core coronal dimmings map to the core of the CME; the secondary coronal dimmings map to the CME cavity; and the diffuse coronal wave maps to the outermost edge of the expanding CME shell. The analysis of this near-limb event has important implications for understanding earlier eruptions originating from the same AR on 2007 May 16, 19, and 20.

  11. Incremental Evolutionary Methods for Automatic

    E-Print Network [OSTI]

    Langseth, Helge

    Incremental Evolutionary Methods for Automatic Programming of Robot Controllers Thesis Theory studies the fundamental control principles of robotic systems. However, the technological progress such system often requires manual work of engineers. Automatic methods might lead to systems that perform task

  12. Comparative Study of summer, Winter and Quinox Sky Type of India Using Daylight Coefficient Method and Cie Standard General Sky Model

    E-Print Network [OSTI]

    Sutapa Mukherjee M. Tech

    Abstract:- Energy efficiency provided by daylight requires an accurate estimation of the amount of daylight entering a building. The actual daylight illuminance of a room is mainly influenced by the luminance levels and patterns of the sky in the direction of view of the window at that time. The daylight coefficient concept, which considers the changes in the luminance of the sky elements, offers a more effective way of computing indoor daylight illuminances. Recently, Kittler et al. have proposed a new range of 15 standard sky luminance distributions including the CIE (International Commission onIllumination) standard clear sky. Lately, these 15 sky luminance models have been adopted as the CIE Standard General Skies.This paper aims to find out representative CIE (International Commission on Illumination) Standard Clear Sky model(s) for three different seasons-winter solstice, equinox, and summer solstice applicable for prevailing clear sky climatic conditions in India [Roorkee]. Indian measured sky luminance distribution database is available only for Roorkee[29 0 51 ' N; 77 0 53 ' E]. To find out the best match between Indian measured sky luminance distribution and each of five CIE Standard Clear sky models, only sky component of spatial illuminance distribution over the working plane of a room was simulated by MATLABfor three different seasons. Daylight Coefficient method has been applied for the simulation using Indian sky luminance database.The simulation has been done for the room with eight different window orientations ranging from 0 0 to 315 0 with an interval of 45 0 to generate data for the entire sky vault. To find out the

  13. A SIMULATION ASSESSMENT OF THE HEIGHT OF LIGHT SHELVES TO ENHANCE DAYLIGHTING QUALITY IN TROPICAL OFFICE BUILDINGS UNDER OVERCAST SKY CONDITIONS IN DHAKA, BANGLADESH

    E-Print Network [OSTI]

    Md. Ashikur; Rahman Joarder; Zebun Nasreen Ahmed; Andrew Price; Monjur Mourshed

    The objective of this paper is to highlight the effectiveness of light shelves in tropical office buildings to enhance interior daylighting quality. Daylight simulation was performed for custom light shelves for a typical office floor of Dhaka City in Bangladesh, to determine the best possible location under overcast sky conditions. Six alternative models of a 3m high study space were created with varying heights of light shelves. The 3D models were first generated in the Ecotect to study the distribution and uniformity of daylight in the interior space with splitflux method. These models were then exported to a physically-based backward raytracer, Radiance Synthetic Imaging software to generate realistic lighting levels for validating and crosschecking the Ecotect results. The results showed that for achieving light levels closest to specified standards, light shelves at a height of 2m above floor level perform better among the seven alternatives studied including the alternative where no light shelves are present. Finally, the decisions were verified with DAYSIM simulation program to ensure the compliance of the decisions with dynamic annual climate-based daylight performance metrics.

  14. Demonstration with Energy and Daylighting Assessment of Sunlight Responsive Thermochromic (SRT) Window Systems

    SciTech Connect (OSTI)

    Broekhuis, Michael; Liposcak, Curtis; Witte, Michael; Henninger, Robert; Zhou, Xiaohui; Petzen, George; Buchanan, Michael; Kumar, Sneh

    2012-03-31T23:59:59.000Z

    Pleotint, LLC was able to successfully extrude thermochromic interlayer for use in the fenestration industry. Pleotint has developed a thermochromic sytem that requires two thermochromic colors to make a neutral color when in the tinted state. These two colors were assembled into a single interlayer called a tri-layer prelam by Crown Operations for use in the glass lamination industry. Various locations, orientations, and constructions of thermochromic windows were studied with funds from this contract. Locations included Australia, California, Costa Rica, Indiana, Iowa, Mexico. Installed orientations included vertical and skylight glazing applications. Various constructions included monolithic, double pane, triple pane constructions. A daylighting study was conducted at LinEl Signature. LinEl Signature has a conference room with a sylight roof system that has a west orientation. The existing LinEl Signature conference room had constant tint 40% VLT transparent skylights. Irradiance meters were installed on the interior and exterior sides of a constant tint skylight. After a month and a half of data collection, the irradiance meters were removed and the constant tint skylights were replaced with Pleotint thermochromic skylight windows. The irradiance meters were reinstalled in the same locations and irradiance data was collected. Both data sets were compared. The data showed that there was a linear relationship with exterior and interior irradiance for the existing constant tint skylights. The thermochromic skylights have a non-linear relationship. The thermochromic skylights were able to limit the amount of irradiance that passed through the thermochromic skylight. A second study of the LinEl Signature conference was performed using EnergyPlus to calculate the amount of Illuminance that passed through constant tint skylights as compared to thermochromic skylights. The constant tint skylights transmitted Illuminance is 2.8 times higher than the thermochromic skylights during the months of May, June, July, August and 1.9 times higher than the thermochromic skylight during the months of March, April, September, October. Calculated illuminance levels were much more consistent as compared to the existing constant tint skylights installed at LinEl Signature. This allows for a more comfortable interior space in regard to glare discomfort and interior lighting control. Lawrence Berkeley National Laboratory was contracted to characterize the performance of the thermochromic interlayer and thermochromic window systems. Thermochromic interlayer was characterized with spectrometer equipment. The thermochromic window systems were characterized using LBNL抯 Advanced Window Test Facility. A copy of the report can be found in the Appendix. Iowa State University was contracted to compare thermochromic window technology to constant tint technology. Iowa State University conducted the testing at the Energy Resource Station (ERS). The ERS has the ability to simultaneously test side-by-side competing building technologies. The building is equipped with two identical air handling units, each with its own dedicated and identical chiller. One air handling unit supplies the four test rooms designated as the A rooms and the other unit serves the four test rooms designated as the B rooms. There is one A test room and one B test rooms arranged as pairs in a side-by-side design with each pair having a different exposure. There is a pair of test rooms that face the south, an east and west facing pair. Each of the test rooms is a mirror image of its match with identical construction. The rooms are unoccupied; however, the capability to impose false loads on the rooms exists. The false loads and room lighting can be scheduled to simulate various usage patterns. A copy of the report can be found in the Appendix. GARD Analytics was contracted to compare EnergyPlus building simulations to the data recorded at the Iowa ERS. The goal of this research was to validate the building simulation software developed by the US Department of Energy. EnergyPlus is

  15. Automatic readout micrometer

    DOE Patents [OSTI]

    Lauritzen, Ted (Lafayette, CA)

    1982-01-01T23:59:59.000Z

    A measuring system is disclosed for surveying and very accurately positioning objects with respect to a reference line. A principal use of this surveying system is for accurately aligning the electromagnets which direct a particle beam emitted from a particle accelerator. Prior art surveying systems require highly skilled surveyors. Prior art systems include, for example, optical surveying systems which are susceptible to operator reading errors, and celestial navigation-type surveying systems, with their inherent complexities. The present invention provides an automatic readout micrometer which can very accurately measure distances. The invention has a simplicity of operation which practically eliminates the possibilities of operator optical reading error, owning to the elimination of traditional optical alignments for making measurements. The invention has an extendable arm which carries a laser surveying target. The extendable arm can be continuously positioned over its entire length of travel by either a coarse or fine adjustment without having the fine adjustment outrun the coarse adjustment until a reference laser beam is centered on the target as indicated by a digital readout. The length of the micrometer can then be accurately and automatically read by a computer and compared with a standardized set of alignment measurements. Due to its construction, the micrometer eliminates any errors due to temperature changes when the system is operated within a standard operating temperature range.

  16. Clothes Dryer Automatic Termination Evaluation

    SciTech Connect (OSTI)

    TeGrotenhuis, Ward E.

    2014-10-01T23:59:59.000Z

    Volume 2: Improved Sensor and Control Designs Many residential clothes dryers on the market today provide automatic cycles that are intended to stop when the clothes are dry, as determined by the final remaining moisture content (RMC). However, testing of automatic termination cycles has shown that many dryers are susceptible to over-drying of loads, leading to excess energy consumption. In particular, tests performed using the DOE Test Procedure in Appendix D2 of 10 CFR 430 subpart B have shown that as much as 62% of the energy used in a cycle may be from over-drying. Volume 1 of this report shows an average of 20% excess energy from over-drying when running automatic cycles with various load compositions and dryer settings. Consequently, improving automatic termination sensors and algorithms has the potential for substantial energy savings in the U.S.

  17. A Step Towards Automatic Documentation

    E-Print Network [OSTI]

    Frank, Claude

    This paper describes a system which automatically generates program documentation. Starting with a plan generated by analyzing the program, the system computes several kinds of summary information about the program. The ...

  18. Automatic safety rod for reactors

    DOE Patents [OSTI]

    Germer, John H. (San Jose, CA)

    1988-01-01T23:59:59.000Z

    An automatic safety rod for a nuclear reactor containing neutron absorbing material and designed to be inserted into a reactor core after a loss-of-core flow. Actuation is based upon either a sudden decrease in core pressure drop or the pressure drop decreases below a predetermined minimum value. The automatic control rod includes a pressure regulating device whereby a controlled decrease in operating pressure due to reduced coolant flow does not cause the rod to drop into the core.

  19. How to Select Lighting Controls for Offices and Public Buildings

    Broader source: Energy.gov (indexed) [DOE]

    Controls For Offices and Public Buildings LT-8 PAGE 1 DECEMBER 2000 Definitions Daylight dimming employs sensors that detect ambient light levels and then allow ballasts to...

  20. BUILDING TECHNOLOGIES PROGRAM Tax Deduction Qualified Software

    Broader source: Energy.gov (indexed) [DOE]

    interior and exterior lighting controls, such as occupancy sensors, time-clocks, and daylight-sensitive photocells for stepped or continuous dimming of electric lighting and the...

  1. Daylight photocatalysis performance of biomorphic CeO{sub 2} hollow fibers prepared with lens cleaning paper as biotemplate

    SciTech Connect (OSTI)

    Qian, Junchao; Chen, Feng [Department of Material Science and Engineering, Jiangsu University, 212013 Zhenjiang (China)] [Department of Material Science and Engineering, Jiangsu University, 212013 Zhenjiang (China); Wang, Fang; Zhao, Xiaobing [Department of Materials Science and Engineering, Changzhou University, 213164 Changzhou (China)] [Department of Materials Science and Engineering, Changzhou University, 213164 Changzhou (China); Chen, Zhigang, E-mail: ziyou1900@gmail.com [Department of Material Science and Engineering, Jiangsu University, 212013 Zhenjiang (China) [Department of Material Science and Engineering, Jiangsu University, 212013 Zhenjiang (China); Jiangsu Key Laboratory for Environment Functional Materials, 215009 Suzhou University of Science and Technology, Suzhou (China); State Key laboratory of Crystal Material, Shandong University, 250100 Jinan (China)

    2012-08-15T23:59:59.000Z

    Highlights: ? A novel, simple and eco-friendly approach for hierarchical, biomorphic CeO{sub 2} hollow fibers with mesoporous tube walls is presented by using paper as template. ? The biomorphic CeO{sub 2} fibers was composed of nanosheets with bimodal pore-size mesoporous distribution and exhibited high light-harvesting under sunlight irradiation. ? The CeO{sub 2} microfibers biomimicking the natural plant structures have promising application for photodegradation of organic pollutants in water. -- Abstract: Hierarchical, biomorphic CeO{sub 2} hollow fibers with mesoporous tube walls have been fabricated using lens cleaning paper as biotemplates. After sintered at 550 癈 in air, the cellulosic fibers of paper were converted into micro-tubes composing of CeO{sub 2} crystallites with grain size about 8 nm. The photocatalytic activity of the CeO{sub 2} fibers was evaluated by photodegradation efficiency of methylene blue in aqueous solution under daylight irradiation. The characterized results show that the CeO{sub 2} fibers faithfully replicated micro-fibrous structure derived from original template and possessed dramatic enhanced photocatalytic activity compared with bulk CeO{sub 2}. This simple biotemplate method provides a cost-effective and eco-friendly route to obtain high performance photocatalysts.

  2. Dimming Supernovae by Axions

    E-Print Network [OSTI]

    We considered a model with a hypothetical axion (a type of particle that appears in many models of new physics, including string theory). ...

  3. AUTOMATIC VARIABLE VENTILATION CONTROL SYSTEMS BASED ON AIR QUALITY DETECTION

    E-Print Network [OSTI]

    Turiel, Isaac

    2011-01-01T23:59:59.000Z

    ~saon Automatic Variable Ventilation Control Systems Based79-3 Automatic variable ventilation control systems based onof automatic variable ventilation control systems, result in

  4. Throttle And Brake Control Systems For Automatic Vehicle Following

    E-Print Network [OSTI]

    Ioannou, P.; Xu, Z.

    1994-01-01T23:59:59.000Z

    and Brake Control Systems for Automatic Vehicle Following P.and Brake Control Systems for Automatic Vehicle Following *Transit Systems, Proceedings of 1977 Joint Automatic Control

  5. Automatic rapid attachable warhead section

    DOE Patents [OSTI]

    Trennel, A.J.

    1994-05-10T23:59:59.000Z

    Disclosed are a method and apparatus for automatically selecting warheads or reentry vehicles from a storage area containing a plurality of types of warheads or reentry vehicles, automatically selecting weapon carriers from a storage area containing at least one type of weapon carrier, manipulating and aligning the selected warheads or reentry vehicles and weapon carriers, and automatically coupling the warheads or reentry vehicles with the weapon carriers such that coupling of improperly selected warheads or reentry vehicles with weapon carriers is inhibited. Such inhibition enhances safety of operations and is achieved by a number of means including computer control of the process of selection and coupling and use of connectorless interfaces capable of assuring that improperly selected items will be rejected or rendered inoperable prior to coupling. Also disclosed are a method and apparatus wherein the stated principles pertaining to selection, coupling and inhibition are extended to apply to any item-to-be-carried and any carrying assembly. 10 figures.

  6. Automatic caption generation for news images

    E-Print Network [OSTI]

    Feng, Yansong

    2011-06-30T23:59:59.000Z

    This thesis is concerned with the task of automatically generating captions for images, which is important for many image-related applications. Automatic description generation for video frames would help security ...

  7. Automatic Control Flow Generation from Software Architectures

    E-Print Network [OSTI]

    Lau, Kung-Kiu

    -time automatically. To achieve this we take a different approach to system construction. We take control out.-K. Lau and V. Ukis generic connectors, and generate control flow of the system automatically at run in different systems with different control flows. Our automatic runtime control flow generation not only

  8. THE DAYLIGHTING SOLUTION

    E-Print Network [OSTI]

    Selkowitz, Stephen

    2013-01-01T23:59:59.000Z

    sho\\l'rooms. Use of solar energy for thermal control insolar applications in buildings has focused on providing thermal energy

  9. Daylighting | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you want toworldPowerHome | Department of EnergySolar2 at the

  10. Daylighting | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 Russian NuclearandJunetrack graphics4 Volume 1

  11. Window Daylighting Demo

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your DensityEnergy U.S.-China Electric VehicleCenters | Department ofoftoMay 8,Energy Wind Vision:

  12. Daylighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube| Department ofDepartment9-92JanuaryProgram AreasDavis-Bacon

  13. Automatic Eyeglasses Removal from Face Images

    E-Print Network [OSTI]

    Narasayya, Vivek

    Automatic Eyeglasses Removal from Face Images Chenyu Wu, Ce Liu, Heung-Yueng Shum, Member, IEEE an intelligent image editing and face synthesis system that automatically removes eyeglasses from an input frontal face image. Although conventional image editing tools can be used to remove eyeglasses by pixel

  14. Department of Computer Science AUTOMATIC VERIFICATION OF

    E-Print Network [OSTI]

    Oxford, University of

    Department of Computer Science AUTOMATIC VERIFICATION OF COMPETITIVE STOCHASTIC SYSTEMS Taolue Chen Automatic verification techniques for probabilistic systems have been success- fully applied in a variety systems also exhibit non- deterministic behaviour, e.g. due to concurrency, underspecification or control

  15. AUTOMATIC VARIABLE VENTILATION CONTROL SYSTEMS BASED ON AIR QUALITY DETECTION

    E-Print Network [OSTI]

    Turiel, Isaac

    2011-01-01T23:59:59.000Z

    saon Automatic Variable Ventilation Control Systems Based onL Kusuda, "Control Ventilation to Conserve Energy While t79-3 Automatic variable ventilation control systems based on

  16. Fact #850: December 8, 2014 Automatic Transmissions have closed...

    Broader source: Energy.gov (indexed) [DOE]

    Historically, manual transmissions have delivered better fuel economy than automatic transmissions. However, improvements in the efficiency of automatic transmissions have closed...

  17. automatic intruder monitoring: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    increasingly attractive Wright , Matthew 3 Automatic Monitor Mixing for Live Musical Performance* Engineering Websites Summary: Automatic Monitor Mixing for Live Musical...

  18. automatic transmission system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and toolset for automatic generation of hypertext system repositories. Our code generator, called and a supporting toolset to automatically generate hypertext system...

  19. automatic watering based: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Extended Kumar, Ratnesh 52 An Automatic Load Sharing Approach for a DFIG Based Wind Generator in a Microgrid Engineering Websites Summary: An Automatic Load Sharing Approach...

  20. Pressurized Pepsin Digestion in Proteomics: An Automatable Alternative...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pepsin Digestion in Proteomics: An Automatable Alternative to Trypsin for Integrated Top-down Bottom-up Proteomics. Pressurized Pepsin Digestion in Proteomics: An Automatable...

  1. automatic control: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic or controlled processing, depending Logan, Gordon D. 38 Declarative Camera Control for Automatic Cinematography CiteSeer Summary: Animations generated by interactive...

  2. automatic ph control: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic or controlled processing, depending Logan, Gordon D. 40 Declarative Camera Control for Automatic Cinematography CiteSeer Summary: Animations generated by interactive...

  3. automatic vessel control: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic or controlled processing, depending Logan, Gordon D. 49 Declarative Camera Control for Automatic Cinematography CiteSeer Summary: Animations generated by interactive...

  4. automatic exposure control: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic or controlled processing, depending Logan, Gordon D. 44 Declarative Camera Control for Automatic Cinematography CiteSeer Summary: Animations generated by interactive...

  5. automatic control rod: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic or controlled processing, depending Logan, Gordon D. 47 Declarative Camera Control for Automatic Cinematography CiteSeer Summary: Animations generated by interactive...

  6. automatic control estrategias: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic or controlled processing, depending Logan, Gordon D. 38 Declarative Camera Control for Automatic Cinematography CiteSeer Summary: Animations generated by interactive...

  7. automatic controllers: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic or controlled processing, depending Logan, Gordon D. 38 Declarative Camera Control for Automatic Cinematography CiteSeer Summary: Animations generated by interactive...

  8. automatic archaeological feature: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nancy2 University NASA Ames robots to automatically detect features. Hid- den Markov Models have been used for a long time in pattern 28 Adaptive Automatic Facial Feature...

  9. automatically constructed fuzzy: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    birds, BirdID imitates bird experts to automatically direct Yao, Xin 16 Automatic Design of Hierarchical Fuzzy Controllers Using Genetic Algorithms Engineering Websites...

  10. Automatic insulation resistance testing apparatus

    DOE Patents [OSTI]

    Wyant, Francis J.; Nowlen, Steven P.; Luker, Spencer M.

    2005-06-14T23:59:59.000Z

    An apparatus and method for automatic measurement of insulation resistances of a multi-conductor cable. In one embodiment of the invention, the apparatus comprises a power supply source, an input measuring means, an output measuring means, a plurality of input relay controlled contacts, a plurality of output relay controlled contacts, a relay controller and a computer. In another embodiment of the invention the apparatus comprises a power supply source, an input measuring means, an output measuring means, an input switching unit, an output switching unit and a control unit/data logger. Embodiments of the apparatus of the invention may also incorporate cable fire testing means. The apparatus and methods of the present invention use either voltage or current for input and output measured variables.

  11. Automatic Mechetronic Wheel Light Device

    DOE Patents [OSTI]

    Khan, Mohammed John Fitzgerald (Silver Spring, MD)

    2004-09-14T23:59:59.000Z

    A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

  12. Research and Development of a New Field Enhanced Low Temperature Thermionic Cathode that Enables Fluorescent Dimming and Loan Shedding without Auxiliary Cathode Heating

    SciTech Connect (OSTI)

    Feng Jin

    2009-01-07T23:59:59.000Z

    This is the final report for project entitled 'Research and development of a new field enhanced low temperature thermionic cathode that enables fluorescent dimming and load shedding without auxiliary cathode heating', under Agreement Number: DE-FC26-04NT-42329. Under this project, a highly efficient CNT based thermionic cathode was demonstrated. This cathode is capable of emitting electron at a current density two order of magnitude stronger then a typical fluorescent cathode at same temperatures, or capable of emitting at same current density but at temperature about 300 C lower than that of a fluorescent cathode. Detailed fabrication techniques were developed including CVD growth of CNTs and sputter deposition of oxide thin films on CNTs. These are mature technologies that have been widely used in industry for large scale materials processing and device fabrications, thus, with further development work, the techniques developed in this project can be scaled-up in manufacturing environment. The prototype cathodes developed in this project were tested in lighting plasma discharge environment. In many cases, they not only lit and sustain the plasma, but also out perform the fluorescent cathodes in key parameters such like cathode fall voltages. More work will be needed to further evaluate more detailed and longer term performance of the prototype cathode in lighting plasma.

  13. Automatic 5-axis NC toolpath generation

    E-Print Network [OSTI]

    Balasubramaniam, Mahadevan, 1976-

    2001-01-01T23:59:59.000Z

    Despite over a decade of research, automatic toolpath generation has remained an elusive goal for 5-axis NC machining. This thesis describes the theoretical and practical issues associated with generating collision free ...

  14. Automatic tuning of continuous-time filters

    E-Print Network [OSTI]

    Sumesaglam, Taner

    2004-11-15T23:59:59.000Z

    Integrated high-Q continuous-time filters require adaptive tuning circuits that will correct the filter parameters such as center frequency and quality factor (Q). Three different automatic tuning techniques are introduced. In all of the proposed...

  15. Automatic Control of Freeboard and Turbine Operation

    E-Print Network [OSTI]

    Automatic Control of Freeboard and Turbine Operation 颅 Wave Dragon, Nissum Bredning Project: Sea of Freeboard and Turbine Operation Wave Dragon, Nissum Bredning by Jens Peter Kofoed & Peter Frigaard, Aalborg.........................................................................................................................10 TURBINE PERFORMANCE DATA

  16. Automatic tuning of continuous-time filters

    E-Print Network [OSTI]

    Sumesaglam, Taner

    2004-11-15T23:59:59.000Z

    Integrated high-Q continuous-time filters require adaptive tuning circuits that will correct the filter parameters such as center frequency and quality factor (Q). Three different automatic tuning techniques are introduced. In all of the proposed...

  17. Automatic safety rod for reactors. [LMFBR

    DOE Patents [OSTI]

    Germer, J.H.

    1982-03-23T23:59:59.000Z

    An automatic safety rod for a nuclear reactor containing neutron absorbing material and designed to be inserted into a reactor core after a loss-of-flow. Actuation is based upon either a sudden decrease in core pressure drop or the pressure drop decreases below a predetermined minimum value. The automatic control rod includes a pressure regulating device whereby a controlled decrease in operating pressure due to reduced coolant flow does not cause the rod to drop into the core.

  18. Automatic well log correlation using neural networks

    E-Print Network [OSTI]

    Habiballah, Walid Abdulrahim

    1991-01-01T23:59:59.000Z

    AUTOMATIC WELL LOG CORRELATION USING NEURAL NETWORKS A Thesis by WALID ABDULHAHIM HABIBALLAH Submitted to the Office of Graduate Studies of Texas AaM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... August 1991 Major Subject; Petroleum Engineering AUTOMATIC WELL LOG CORRELATION USING NEURAL NETWORKS A Thesis by WALID ABDULRAHIM HABIBALLAH Approved as to style and content by: R. A. St tzman (Chair of Committee) S. W. Poston (Member) R. R...

  19. Possible evolution of dim radio quiet neutron star 1E 1207.4-5209 based on a B-decay model

    E-Print Network [OSTI]

    Askin Ankay; Arzu M. Ankay; E. Nihal Ercan

    2007-06-06T23:59:59.000Z

    Dim radio-quiet neutron star (DRQNS) 1E 1207.4-5209 is one of the most heavily examined isolated neutron stars. Wide absorption lines were observed in its spectrum obtained by both XMM-Newton and Chandra X-ray satellites. These absorption lines can be interpreted as a principal frequency centered at 0.7 keV and its harmonics at 1.4, 2.1 and possibly 2.8 keV. The principal line can be formed by resonant proton cyclotron scattering leading to a magnetic field which is two orders of magnitude larger than the perpendicular component of the surface dipole magnetic field (B) found from the rotation period (P) and the time rate of change in the rotation period (\\.{P}) of 1E 1207.4-5209. Besides, age of the supernova remnant (SNR) G296.5+10.0 which is physically connected to 1E 1207.4-5209 is two orders of magnitude smaller than the characteristic age ($\\tau$=P/2\\.{P}) of the neutron star. These huge differences between the magnetic field values and the ages can be explained based on a B-decay model. If the decay is assumed to be exponential, the characteristic decay time turns out to be several thousand years which is three orders of magnitude smaller than the characteristic decay time of radio pulsars represented in an earlier work. The lack of detection of radio emission from DRQNSs and the lack of point sources and pulsar wind nebulae in most of the observed SNRs can also be partly explained by such a very rapid exponential decay. The large difference between the characteristic decay times of DRQNSs and radio pulsars must be related to the differences in the magnetic fields, equation of states and masses of these isolated neutron stars.

  20. QUEENSLAND UNIVERSITY OF TECHNOLOGY CENTRE FOR MEDICAL, HEALTH AND ENVIRONMENTAL PHYSICS SCHOOL OF PHYSICAL AND CHEMICAL SCIENCES MODIFICATION OF ATRIUM DESIGN TO IMPROVE THERMAL AND DAYLIGHTING PERFORMANCE

    E-Print Network [OSTI]

    Ashley Mabb; Centre For Medical; Environmental Physics

    The inclusion of a central court or atrium within a building is a popular design due to its aesthetic, open appearance. The greater penetration of natural light aids in the reduction in use of artificial lighting during the day. Care must be taken to balance the solar heat gain against the daylight penetration. This balance is critical for the reduction of the electrical energy load of the building, whilst maintaining a high level of comfort for the occupants. In the tropics modifications to atrium building designs are necessary to diminish high elevation direct solar heat gain. Traditionally, shading the window apertures or lowering the transmission through the glazing was used. These solutions limit the view and reduce the light level. The use of angular selective glazing upon atria allows the rejection of high elevation direct sunlight whilst redirecting and therefore improving low elevation skylight penetration. Tilted angular selective glazing used upon adjoining spaces to atria help vertical light in the atrium well to be redirected horizontally deep into the space. These effects reduce overheating which would normally restrict the use of atria in warmer environments as well as improve illumination penetration into adjoining spaces.

  1. Tri-Met's Experience With Automatic Passenger Counter and Automatic Vehicle Location Systems

    E-Print Network [OSTI]

    Bertini, Robert L.

    on an earlier draft. #12;Introduction The Tri-County Metropolitan Transportation District of Oregon (TriTri-Met's Experience With Automatic Passenger Counter and Automatic Vehicle Location Systems James State University Portland, OR 97207 This report is benefited from interviews of Tri-Met staff involved

  2. A Dynamic Visualization Environment For The Design And Evaluation Of Automatic Vehicle Control Systems

    E-Print Network [OSTI]

    Xu, Z.

    1995-01-01T23:59:59.000Z

    of Automatic Vehicle Control Systems Application inand Evaluation of Automatic Vehicle Control Systems , PATHand Evaluation of Automatic Vehicle Control Systems bY z. xu

  3. Automatically processed alpha-track radon monitor

    DOE Patents [OSTI]

    Langner, G.H. Jr.

    1993-01-12T23:59:59.000Z

    An automatically processed alpha-track radon monitor is provided which includes a housing having an aperture allowing radon entry, and a filter that excludes the entry of radon daughters into the housing. A flexible track registration material is located within the housing that records alpha-particle emissions from the decay of radon and radon daughters inside the housing. The flexible track registration material is capable of being spliced such that the registration material from a plurality of monitors can be spliced into a single strip to facilitate automatic processing of the registration material from the plurality of monitors. A process for the automatic counting of radon registered by a radon monitor is also provided.

  4. A distributed application server for automatic differentiation.

    SciTech Connect (OSTI)

    Norris, B.; Hovland, P. D.

    2000-11-30T23:59:59.000Z

    The ADIC Application Server brings the accuracy and efficiency of automatic differentiation to the World Wide Web. Users of the ADIC Application Server can upload source code written in ANSI-C, manage remote files, differentiate selected functions, and download code augmented with derivative computations. Using a simple driver and linking to the appropriate libraries, the user can compile and run the differentiated code locally. We discuss the unique requirements for an automatic differentiation application server and describe the implementation of the ADIC Application Server.

  5. Development of an automatic marine corer

    E-Print Network [OSTI]

    Herman, Richard Joseph

    1972-01-01T23:59:59.000Z

    of the Texas A&M Automatic Marine Corer was continued in June, 1971. The ob]ectives of. this development phase of the corer were (a) to evaluate components within the unit with special consideration given to strength, longevity and ease of production.... The present work will be referred to as Phase III. The ob)ectives of Phase III were the further development of the Texas A&M Automatic Marine Corer. In particular, these ob]ectives were (a) to evaluate components within the unit with special con...

  6. Automatic Performance Collection (AutoPerf) | Argonne Leadership...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Automatic Performance Collection (AutoPerf) A beta version of a tool for the automatic collection of hardware performance counter and MPI information has been installed on ALCF BG...

  7. Automatic vehicle following for emergency lane change maneuvers

    E-Print Network [OSTI]

    Yoon, Seok Min

    1998-01-01T23:59:59.000Z

    A lane change maneuver is one of the many appropriate responses to an emergency situation. This thesis proposes to design a combined controller for automatic vehicles for an emergency lane change (ELC) maneuver on an Automatic Highway System (AHS...

  8. Automatic Fish Classification for Underwater Species Behavior Understanding

    E-Print Network [OSTI]

    Fisher, Bob

    Automatic Fish Classification for Underwater Species Behavior Understanding Concetto Spampinato an automatic fish classi- fication system that operates in the natural underwater en- vironment to assist marine biologists in understanding fish behavior. Fish classification is performed by combining two types

  9. Automatic Multimedia Knowledge Discovery, Summarization and Evaluation Ana B. Benitez *

    E-Print Network [OSTI]

    Fan, Jianping

    Automatic Multimedia Knowledge Discovery, Summarization and Evaluation Ana B. Benitez * Department for automatically discovering, summarizing and evaluating multimedia knowledge from annotated images in the form for applications to intelligently, efficiently and coherently deal with multimedia. The proposed methods include

  10. automatic generation control: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    W. F. Long 1994-01-14 42 An Automatic Load Sharing Approach for a DFIG Based Wind Generator in a Microgrid Engineering Websites Summary: An Automatic Load Sharing Approach...

  11. Automatic vehicle following for emergency lane change maneuvers

    E-Print Network [OSTI]

    Yoon, Seok Min

    1998-01-01T23:59:59.000Z

    A lane change maneuver is one of the many appropriate responses to an emergency situation. This thesis proposes to design a combined controller for automatic vehicles for an emergency lane change (ELC) maneuver on an Automatic Highway System (AHS...

  12. automatic simplex optimization: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic simplex optimization First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Automatic...

  13. ACCEPTANCE REQUIREMENTS AND HOME ENERGY RATING SYSTEMS

    E-Print Network [OSTI]

    ................................................................................................. NJ-5 NJ.6. Lighting Control Systems ........................................................................................................... NJ-6 NJ.6.1 Automatic Daylighting Controls Acceptance ........................................................................... NJ-9 NJ.6.4 Automatic Time Switch Control Acceptance

  14. automatic vehicle classification: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Keywords: Document Classification, Document Structure, Technical Document, Support Vector Machine, Vector in the electronic format, needs an automatic...

  15. Adaptive Web Sites: Automatically Synthesizing Web Pages

    E-Print Network [OSTI]

    Etzioni, Oren

    Adaptive Web Sites: Automatically Synthesizing Web Pages Mike Perkowitz Oren Etzioni Department interfaces Abstract The creation of a complex web site is a thorny problem in user interface design. In IJCAI '97, we challenged the AI community to address this problem by creating adaptive web sites: sites

  16. Automatically Restructuring Programs for the Web

    E-Print Network [OSTI]

    Automatically Restructuring Programs for the Web Paul Graunke Northeastern University ptg server-side Web appli- cations differs substantially from the construction of tradi- tional interactive programs. In contrast, existing Web pro- gramming paradigms force programmers to save and re- store control

  17. Automatically Restructuring Programs for the Web

    E-Print Network [OSTI]

    Automatically Restructuring Programs for the Web Paul Graunke Northeastern University ptg server颅side Web appli颅 cations differs substantially from the construction of tradi颅 tional interactive programs. In contrast, existing Web pro颅 gramming paradigms force programmers to save and re颅 store control

  18. Data system for automatic flux mapping applications

    SciTech Connect (OSTI)

    Couch, R.D.; Kasinoff, A.M.; Neuner, J.A.; Oates, R.M.

    1980-12-16T23:59:59.000Z

    In an automatic flux mapping system utilizing a microprocessor for control and data information processing, signals from the incore detectors providing the flux mapping operation are converted to a frequency link and are made available to the microprocessor via a programmable timer thus minimizing the participation of the microprocessor so that the microprocessor can be made more available to satisfy other tasks.

  19. Architecture of an Automatic Tuned Linear Algebra

    E-Print Network [OSTI]

    Gim茅nez, Domingo

    /01 and PI-34/00788/F5/01. #12;Hierarchical Architecture of a Self-Optimised Lineal Algebra LibraryArchitecture of an Automatic Tuned Linear Algebra Library* Javier Cuenca Domingo Gim茅nez Jos茅 .... SPt c,z Architecture of a Self-Optimised Linear Algebra Routine (SOLAR) Installation_information n1

  20. Automatically Annotating the ODP Web Taxonomy

    E-Print Network [OSTI]

    Pallis, George

    Automatically Annotating the ODP Web Taxonomy Christiana Christophi Demetrios Zeinalipour. In this paper we present the ideas and algorithms developed around our KeyGen Web Taxonomy Annotation engine) The PageParse Algorithm, which efficiently extracts keywords from Web Taxonomies us- ing a combination

  1. Automatic building modeling from terrestrial laser scanning

    E-Print Network [OSTI]

    Pu, Shi

    Automatic building modeling from terrestrial laser scanning Shi Pu International Institute for Geo hard to recover 3D building structures from 2D image. Recent studies ([2] [6]) show that laser scanning imagery, airborne and terrestrial laser scanning give explicit 3D information, which enables the rapid

  2. Automatic Dependent SurveillanceBroadcast in

    E-Print Network [OSTI]

    significant restructuring of the cur- rent Air Traffic Control (ATC) system. The Federal Aviation Administration (FAA) plans include the Next Generation Air Transportation System (NextGen), a Joint Planning Aviation Administration is adopting Automatic Dependent Surveillance瑽roadcast (ADS瑽) to provide

  3. Automatic Loop Parallelization via Compiler Guided Refactoring

    E-Print Network [OSTI]

    . Lyngby, Denmark Email: {pl,ska}@imm.dtu.dk Computer Science Engineering Chalmers U. Technology, 412 96 by the computing industry today. Yet, applications are often written in ways that prevent automatic parallelization Gothenburg, Sweden Email: lidman@student.chalmers.se, mckee@chalmers.se IBM Haifa Research Labs Mount Carmel

  4. Automatic Generation and Maintenance of Correct Spreadsheets

    E-Print Network [OSTI]

    Erwig, Martin

    of "spreadsheet maintenance safety": Up- date operations that are generated from a type-correct tem- plateAutomatic Generation and Maintenance of Correct Spreadsheets Martin Erwig School of EECS Oregon descriptors: D.2.2 [Software Engineering]: Design Tools and Techniques; D.2.7 [Soft- ware Engineering

  5. Automatic Video Shot Detection from MPEG Stream

    E-Print Network [OSTI]

    Fan, Jianping

    Automatic Video Shot Detection from MPEG Stream Jianping Fan Department of Computer Science;Why we need video shots? a. Text Retrieval: Keyword Extraction Indexing Document Storage Reverse File Indexing #12;Why we need video shots? b. Database Query: Entity Extraction sid name login age gpa 53666

  6. Generalized Automatic and Augmented Manual Flight Control

    E-Print Network [OSTI]

    Berlin,Technische Universit鋞

    Flight Guidance and Control Tony.Lambregts@FAA.gov Tel 425-917-6581 Berlin Technical University & Incidents China Airlines B747 spiral dive after engine failure China Airlines A300 crash at Nagoya A/P roll control saturation, engine out (China Airlines B747) unexpected high altitude automatic

  7. Automatic learning for the classification of primary frequency control behaviour

    E-Print Network [OSTI]

    Wehenkel, Louis

    types of expected or unexpected behaviours. The proposed approach is based on automatic learning whichAutomatic learning for the classification of primary frequency control behaviour Bertrand. Abstract-- In this paper we propose a methodology based on supervised automatic learning in order

  8. Automatic Generation of Roadmap for e-Government Implementation

    E-Print Network [OSTI]

    Boyer, Edmond

    Automatic Generation of Roadmap for e-Government Implementation Mauricio Solar, Daniel Pantoja, and automatically generates the roadmap for each evaluated public agency. In this article, the automatic generation of the proposed roadmap is detailed. Keywords: e-government, roadmap, capability, maturity model. 1 Introduction

  9. Automatic TLI recognition system, user`s guide

    SciTech Connect (OSTI)

    Lassahn, G.D.

    1997-02-01T23:59:59.000Z

    This report describes how to use an automatic target recognition system (version 14). In separate volumes are a general description of the ATR system, Automatic TLI Recognition System, General Description, and a programmer`s manual, Automatic TLI Recognition System, Programmer`s Guide.

  10. Marzia Cescon Department of Automatic Control Lund University

    E-Print Network [OSTI]

    Como, Giacomo

    Transactions on Automatic Control; IEEE Transactions on Control System Technology; IEEE TransactionsMarzia Cescon Department of Automatic Control Lund University Box 118, SE-221 00 Lund, Sweden-Present Education Ph.D. in Automatic Control, Lund University, advisor prof. Rolf Johansson. November 2013

  11. Automatic Model Complexity Control Using Marginalized Discriminative Growth Functions

    E-Print Network [OSTI]

    Hain, Thomas

    Automatic model complexity control . Most LVCSR systems are trained on large amounts of data. . ManyAutomatic Model Complexity Control Using Marginalized Discriminative Growth Functions X. Liu & M. J. J. F. Gales: Automatic Model Complexity Control Using Marginalized Discriminative Growth Functions

  12. Method for automatically scramming a nuclear reactor

    DOE Patents [OSTI]

    Ougouag, Abderrafi M.; Schultz, Richard R.; Terry, William K.

    2005-12-27T23:59:59.000Z

    An automatically scramming nuclear reactor system. One embodiment comprises a core having a coolant inlet end and a coolant outlet end. A cooling system operatively associated with the core provides coolant to the coolant inlet end and removes heated coolant from the coolant outlet end, thus maintaining a pressure differential therebetween during a normal operating condition of the nuclear reactor system. A guide tube is positioned within the core with a first end of the guide tube in fluid communication with the coolant inlet end of the core, and a second end of the guide tube in fluid communication with the coolant outlet end of the core. A control element is positioned within the guide tube and is movable therein between upper and lower positions, and automatically falls under the action of gravity to the lower position when the pressure differential drops below a safe pressure differential.

  13. Automatic transformations in the inference process

    SciTech Connect (OSTI)

    Veroff, R. L.

    1980-07-01T23:59:59.000Z

    A technique for incorporating automatic transformations into processes such as the application of inference rules, subsumption, and demodulation provides a mechanism for improving search strategies for theorem proving problems arising from the field of program verification. The incorporation of automatic transformations into the inference process can alter the search space for a given problem, and is particularly useful for problems having broad rather than deep proofs. The technique can also be used to permit the generation of inferences that might otherwise be blocked and to build some commutativity or associativity into the unification process. Appropriate choice of transformations, and new literal clashing and unification algorithms for applying them, showed significant improvement on several real problems according to several distinct criteria. 22 references, 1 figure.

  14. Variable metric methods for automatic history matching

    E-Print Network [OSTI]

    Armasu, Razvan

    1985-01-01T23:59:59.000Z

    . Automatic history matching codes presently in use employ steepest descent with optimal control, and although they were proven superior to others, their performance is not entirely satisfactory due to the poor rate of convergence as the performance index... rates of convergence when compared to the steepest descent They can be made to start out as steepest descent and end up as a second order algorithm, using functional and gradient information only, In this work several variable metric algorithms...

  15. DAYLIGHTING DIRECTORY 1/1980

    E-Print Network [OSTI]

    ,

    2012-01-01T23:59:59.000Z

    PRESENTATIONS ' ~solar Radiation Data, Natural Lighting, andJUROVICS, S.A. "Solar Radiation Data, Natural Lighting, and

  16. Daylight metrics and energy savings

    E-Print Network [OSTI]

    Mardaljevic, John

    2011-01-01T23:59:59.000Z

    with various 憄erformance indicators becomes ever moreextent that such performance indicators are crude, or the

  17. Daylight metrics and energy savings

    E-Print Network [OSTI]

    Mardaljevic, John

    2011-01-01T23:59:59.000Z

    properties of the space, the exterior context, and interiorand exterior shading devices. In the short term, evaluation of spaces

  18. Natural Daylighting - An Energy Analysis

    E-Print Network [OSTI]

    Jarrell, R. P.

    1987-01-01T23:59:59.000Z

    tiers of elevators, which afforded met by the codes in both economic and energy savings. Because at the time of the design and con- Of the basic premise of the planning con- ~truction. The following table gives data cept, the two-tower scheme... temperature and ventilation control is provided by induction boxes. These boxes reclaim up to 50 percent of the heat from the lights by inducing warm air from the ceiling plenum to the exterior areas where heat is needed in winter. In the summer...

  19. Daylight metrics and energy savings

    E-Print Network [OSTI]

    Mardaljevic, John

    2011-01-01T23:59:59.000Z

    illumination values. The luminance of the CIE standardilluminance, radiance and luminance) using sun and skyon the cumu- lative luminance (or radiance) e?ect of (

  20. Daylight metrics and energy savings

    E-Print Network [OSTI]

    Mardaljevic, John

    2011-01-01T23:59:59.000Z

    the time-stamp. The sky luminance distribution is eitherradiance and luminance) using sun and sky conditions thatlative luminance (or radiance) e?ect of (hourly) sky and the

  1. Daylighting Calculation in DOE-2

    E-Print Network [OSTI]

    Winkelmann, F.C

    2013-01-01T23:59:59.000Z

    8 2.4 Sky LuminanceXBL~8294589 6. Clear sky luminance distribution as measuredand overcast sky DYL Sky luminance ' y DNSOL I Direct

  2. Daylight metrics and energy savings

    E-Print Network [OSTI]

    Mardaljevic, John

    2011-01-01T23:59:59.000Z

    Mardaljevic and A. Nabil. Electrochromic glazing and facadeoptimiza- tion of electrochromic operations for occupantmodulating materials (e.g. electrochromic glazing), blinds,

  3. Tips for Daylighting with Windows

    SciTech Connect (OSTI)

    Robinson, Alastair; Selkowitz, Stephen

    2013-10-01T23:59:59.000Z

    These guidelines provide an integrated approach to the cost-effective design of perimeter zones in new commercial buildings and existing building retrofits. They function as a quick reference for building designers, through a set of easy steps and rules-of-thumb, emphasizing 揾ow-to practical details. References are given to more detailed sources of information, should the reader wish to go further. The design method used in this document emphasizes that building decisions should be made within the context of the whole building as a single functioning system rather than as an assembly of distinct parts. This integrated design approach looks at the ramifications of each individual system decision on the whole building. For example, the decision on glazing selection will have an effect on lighting, mechanical systems, and interior design. Therefore, the entire design team should participate and influence this glazing decision梬hich typically rests with the architect alone. The benefit of an integrated design approach is a greater chance of success towards long-term comfort and sustained energy savings in the building.

  4. Daylight metrics and energy savings

    E-Print Network [OSTI]

    Mardaljevic, John

    2011-01-01T23:59:59.000Z

    section discusses how sustainability and energy-use concernsSustainability and compliance The drive towards sustainable, low-energy

  5. Daylight metrics and energy savings

    E-Print Network [OSTI]

    Mardaljevic, John

    2011-01-01T23:59:59.000Z

    towards sustainable, low-energy buildings has increased thetowards sustainable, low-energy buildings places increasing

  6. daylight | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlinPapersWindey Wind Home Rmckeel's picturecontest Homedatasetdaylight

  7. OpenEI Community - daylight

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRoseConcernsCompany Oil and GasOff

  8. Nanolens Window Coatings for Daylighting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in Many Devils Wash,Energy NRELNamrata KolachalamCoolingofNanolens

  9. automatically generated anatomically: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    be assessed. We describe an approach to automatically generating questions for vocabulary assessment. Tra- ditionally Eskenazi, Maxine 133 Commodity Cluster-Based Parallel...

  10. automatic coding method: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    content words, key words, pragmatic H. P. Edmundson 1969-01-01 14 Automatic recognition codes for Intelligent Vehicle-Highway Systems. Open Access Theses and Dissertations Summary:...

  11. 2014-03-07 Issuance: Energy Conservation Standards for Automatic...

    Energy Savers [EERE]

    2014-03-07 Issuance: Energy Conservation Standards for Automatic Commercial Ice Makers; Notice of Proposed Rulemaking 2014-03-07 Issuance: Energy Conservation Standards for...

  12. automatic refueling simulation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (1991) the measure was used to obtain lower bounds Shallit, Jeffrey O. 57 Automatic Abduction of Qualitative Models Bradley L. R ichards Computer Technologies and Information...

  13. automatic modeling functions: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    system communication; com- puting the group of symmetries Miller, Alice 31 Automatic Abduction of Qualitative Models Bradley L. R ichards Computer Technologies and Information...

  14. automatic high resolution: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with its Sun 3 workstations, Sun Melvin, Stephen 24 Automatic keywording of High Energy Physics CERN Preprints Summary: Bibliographic databases were developed from the...

  15. automatic fare collection: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A general algo- rithm for a given collective communication Dongarra, Jack 4 Collective Mind: Continuous, Automatic Learning to Computer Technologies and Information Sciences...

  16. automatic software processing: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    systems Engineering Environments (PCSEEs) 2 support such projects with both tooling and processes, yet these must Ulm, Universitt 5 Automatically tuned linear...

  17. automatic headway control: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ? AUTOMATIC CONTROL COMMUNICATION Gustafsson, Fredrik 3 A Multivariate Analysis of Freeway Speed and Headway Data Texas A&M University - TxSpace Summary: The...

  18. automatic speed control: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    INITIAL BUOYANCY TESTING modules for automatic control of freeboard and turbine operation are denoted Buoyancy' and Generators 12 Optimal Pitch, Speed and Fuel Control...

  19. automatic robotic spotting: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Automatic Channel Selection and Neural Signal Estimation across Channels of Neural Probes Olga is envisaged to be a central component for brain-controlled computers and robots....

  20. Automatic Dantzig-Wolfe Reformulation of Mixed Integer Programs

    E-Print Network [OSTI]

    2013-11-01T23:59:59.000Z

    Sep 20, 2012 ... bounds can be obtained from the automatically reformulated model .... matrix structure via key words in the modeling language is taken in [7,13...

  1. automatic modular abstractions: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Websites Summary: We propose a method for automatically generating abstract transformers for static analysis permits the analysis of loops and recursive functions. Our...

  2. automatic equipment operation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    free text against audio signals we in- vent an "automatic record review" system that labels new music audio with maximal semantic value for future re- trieval tasks. In...

  3. automatic laser inspection: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . . . . . . . . . . . . . . . . . 12;Abstract Automatic analysis of digital audio data has a long tradition. Many tasks that humans solve easily, like distinguishing the...

  4. Automatically Transforming GNU C Source Code Christopher Dahn, Spiros Mancoridis

    E-Print Network [OSTI]

    Mancoridis, Spiros

    Automatically Transforming GNU C Source Code Christopher Dahn, Spiros Mancoridis Department of Computer Science Drexel University, Philadelphia, PA, USA {chris.dahn}@computer.org {mancors

  5. automatic identification system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Universidad 3 Automatic feature-queried bird identification system based on entropy and fuzzy similarity Computer Technologies and Information Sciences Websites Summary:...

  6. automatic defect classification: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The performance of those feature sets has been evaluated by training statistical pattern recognition classifiers using real world audio collections. Based on the automatic...

  7. automatic trunk classification: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The performance of those feature sets has been evaluated by training statistical pattern recognition classifiers using real world audio collections. Based on the automatic...

  8. automatic fuzzy rule: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    One of the main pros of fuzzy systems is their ability to design comprehensible models of real1 Automatic tuning of a fuzzy visual system using evolutionary algorithms:...

  9. automatic conformation prediction: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    describes a system which automatically generates program documentation. Starting with a plan generated by analyzing the program, the system computes several kinds of summary...

  10. automatic noninvasive measurement: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    86 An automatic method to detect defaults in the measurement chain of a sound level meter, used for Physics Websites Summary: Roger Hennequin, 78197 Trappes Cedex, France...

  11. Automatic Lung Vessel Segmentation via Stacked Multiscale Feature Learning

    E-Print Network [OSTI]

    Toronto, University of

    Automatic Lung Vessel Segmentation via Stacked Multiscale Feature Learning Ryan Kiros, Karteek We introduce a representation learning approach to segmenting vessels in the lungs. Our algorithm

  12. automatic document classification: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Page Last Page Topic Index 1 Automatic construction of a concept hierarchy to assist Web document classification Woo Chul Cho Computer Technologies and Information Sciences...

  13. Self-assessing target with automatic feedback

    DOE Patents [OSTI]

    Larkin, Stephen W.; Kramer, Robert L.

    2004-03-02T23:59:59.000Z

    A self assessing target with four quadrants and a method of use thereof. Each quadrant containing possible causes for why shots are going into that particular quadrant rather than the center mass of the target. Each possible cause is followed by a solution intended to help the marksman correct the problem causing the marksman to shoot in that particular area. In addition, the self assessing target contains possible causes for general shooting errors and solutions to the causes of the general shooting error. The automatic feedback with instant suggestions and corrections enables the shooter to improve their marksmanship.

  14. Design of an automatic marine corer

    E-Print Network [OSTI]

    Davis, Grayum Lloyd

    1970-01-01T23:59:59.000Z

    . Cuttings are washed to the outside of the drill bit to keep from washing the sample. The automatic coring unit is octagonal in shape with a six foot side to side distance and an overall height of twelve feet two inches. It has a weight of approximately... long cores is by rotary drilling (1). This requires a stable platform, necessitating the use ef a barge or large vessel and at least a four point anchor- ing spread (two each on bow and stern). The time consumed in deployment and retriveal...

  15. Janus: Automatic Ontology Builder from XSD Files

    E-Print Network [OSTI]

    Bedini, Ivan; Gardarin, Georges

    2010-01-01T23:59:59.000Z

    The construction of a reference ontology for a large domain still remains an hard human task. The process is sometimes assisted by software tools that facilitate the information extraction from a textual corpus. Despite of the great use of XML Schema files on the internet and especially in the B2B domain, tools that offer a complete semantic analysis of XML schemas are really rare. In this paper we introduce Janus, a tool for automatically building a reference knowledge base starting from XML Schema files. Janus also provides different useful views to simplify B2B application integration.

  16. A continuous automatic hydroponic cultivation system

    E-Print Network [OSTI]

    Reachi Gonzalez, Santiago

    1974-01-01T23:59:59.000Z

    . C. H. Samson, JW. Head of Department Dr. D. McDonald Member r. A. H. Laym n Member. August 1974 ABSTRACT A Continuous Automatic Hydroponic Cultivation Syst. m. (August 1974) Santiago Reachi Gonzalez, B. S. , Texas ARM University Co...-Chairmen of Advisory Committee: Dr. A. W Northam Dr. W. B. X, edbetter The main objective of this study is to develop a system that will provide a household with a high quality balanced vegetable mix at a cost less than existing retail pr' ces. Other objectives...

  17. Caldyne Automatics Limited | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:EzfeedflagBiomassSustainableCSL Gas Recovery Biomass Facility80Caldyne Automatics Limited Jump

  18. Automatic 3D modeling of palatal plaster casts Marco Andreetto

    E-Print Network [OSTI]

    Abu-Mostafa, Yaser S.

    duplicated by 3D printers. A second application where 3D models of palatal casts could also be usefulAutomatic 3D modeling of palatal plaster casts Marco Andreetto Dept. of Information Engineer corte@dei.unipd.it Abstract This work introduces a procedure for automatic 3D model- ing and discusses

  19. Automatic differentiation for message-passing parallel programs.

    SciTech Connect (OSTI)

    Hovland, P.

    1998-01-27T23:59:59.000Z

    Many applications require the derivatives of functions defined by computer programs. Automatic differentiation (AD) is a means of developing code to compute the derivatives of complicated functions accurately and efficiently, without the difficulties associated with developing correct code by hand. We discuss some of the issues involved in developing automatic differentiation tools for parallel programming environments.

  20. automatic test generation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic test generation First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 A Review of Automatic Test...

  1. automatic test card: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic test card First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Automatic Test Card LINAC4 SPL...

  2. automatic test patterns: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic test patterns First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Automatic Test Pattern...

  3. Automatic Fracture Reduction Thomas Albrecht and Thomas Vetter

    E-Print Network [OSTI]

    Vetter, Thomas

    present a method to automatically reposition the frag- ments of a broken bone based on surface meshes nailing, the correct repositioning of bone fragments is not always apparent or visible without an operation plan. We propose to achieve automatic fracture reduction by fitting the bone fragments

  4. Automatic Generation of Implementations For Object-Oriented Abstractions

    E-Print Network [OSTI]

    Texas at San Antonio, University of

    -purpose code transformation system, the POET system, for the purpose of automatic code genera- tion from high then use the POET system to au- tomatically translate the behavior specifications to type-safe OO implementations in Java or C++. Finally, we use the POET system to automatically translate the behavior speci

  5. AUTOMATIC GUIDING OF THE PRIMARY IMAGE OF SOLAR GREGORY TELESCOPES

    E-Print Network [OSTI]

    and declination angles of the Sun. Gregory-type telescopes have an elliptical secondary mirror behind the primeAUTOMATIC GUIDING OF THE PRIMARY IMAGE OF SOLAR GREGORY TELESCOPES G. K?VELER1, E. WIEHR2, D of solar Gregory telescopes is used for automatic guiding. This new system avoids temporal varying

  6. Modular Verification of Timed Circuits Using Automatic Abstraction

    E-Print Network [OSTI]

    Zheng, Hao

    Modular Verification of Timed Circuits Using Automatic Abstraction Hao Zheng, Eric Mercer, Member for verification of timed circuits using automatic abstraction. This approach partitions the design into modules by the RAPPID instruction length decoder designed at Intel [2]. This design was 3 times faster while using only

  7. AUTOMATIC SYNTHESIS USING GENETIC PROGRAMMING OF IMPROVED PID TUNING RULES

    E-Print Network [OSTI]

    Fernandez, Thomas

    AUTOMATIC SYNTHESIS USING GENETIC PROGRAMMING OF IMPROVED PID TUNING RULES Matthew J. Streeter1 University Abstract: Astrom and Hagglund developed tuning rules in 1995 for PID controllers that outperform genetic programming to automatically discover tuning rules for PID controllers that outperform the Astrom

  8. Automatic beam path analysis of laser wakefield particle acceleration data

    E-Print Network [OSTI]

    Geddes, Cameron Guy Robinson

    Automatic beam path analysis of laser wakefield particle acceleration data Oliver R黚el1 particle accelerators play a key role in the understanding of the complex acceleration process in a pipeline fashion to automatically locate and analyze high-energy particle bunches undergoing acceleration

  9. Automatic Beam Path Analysis of Laser Wakefield Particle Acceleration Data

    E-Print Network [OSTI]

    Knowles, David William

    Automatic Beam Path Analysis of Laser Wakefield Particle Acceleration Data Oliver R╱bel1 particle accelerators play a key role in the understanding of the complex acceleration process in a pipeline fashion to automatically locate and analyze high energy particle bunches undergoing acceleration

  10. RIS-M-2311 AUTOMATIC FAULT TREE CONSTRUCTION WITH RIKKE

    E-Print Network [OSTI]

    RIS-M-2311 AUTOMATIC FAULT TREE CONSTRUCTION WITH RIKKE A COMPENDIUM OF EXAMPLES, VOLUME I BASIC MODELS J.R. Taylor Abstract. Examples of automatically constructed fault trees are given. In this first are intended to illustrate the prin- ciples of fault tree construction using the RIKKE failure analysis system

  11. New Methods in Automatic Extracting H. P. EDMUNDSON

    E-Print Network [OSTI]

    Hearst, Marti

    system is parameterized to control and vary the influence of the above four components. The researchNew Methods in Automatic Extracting H. P. EDMUNDSON University of Maryland,* College Park, Maryland ABSTRACT. This paper describes new methods of automatically extracting documents for screening purposes, i

  12. Learning to Control Dynamic Systems with Automatic Quantization

    E-Print Network [OSTI]

    Ling, Charles X.

    Learning to Control Dynamic Systems with Automatic Quantization Charles X. Ling Department: Learning to Control with Automatic Quantization. 1 #12; 1 Introduction Controlling a dynamic system to control dynamic systems with unknown models is a challenging research problem. However, most previous work

  13. CGMurphi: Automatic Synthesis of Numerical Controllers for Nonlinear Hybrid Systems

    E-Print Network [OSTI]

    Tronci, Enrico

    CGMurphi: Automatic Synthesis of Numerical Controllers for Nonlinear Hybrid Systems Giuseppe Della, thus much work is being done to create automatic controller synthesis tools. When dealing with critical systems, most of the times such controllers are required to be optimal and robust, i.e., they must achieve

  14. Automatic mapping of ASSIST applications using process algebra

    E-Print Network [OSTI]

    Benoit, Anne

    Automatic mapping of ASSIST applications using process algebra M. Aldinucci Inst. of Information Programme Project no. FP6-004265 #12;Automatic mapping of ASSIST applications using process algebra M algebra PEPA. We target applications written with the high-level environment ASSIST, since the use

  15. AUTOMATIC TV LOGO DETECTION AND CLASSIFICATION IN BROADCAST VIDEOS

    E-Print Network [OSTI]

    AUTOMATIC TV LOGO DETECTION AND CLASSIFICATION IN BROADCAST VIDEOS Nedret ∣ZAY, B╱lent SANKUR In this study1 , we present a fully automatic TV logo iden- tification system. TV logos are detected in static of a logo candidate is established, TV logos are recognized via their subspace fea- tures. Comparative

  16. E-Print Network 3.0 - automatically discovering hidden Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for: automatically discovering hidden Page: << < 1 2 3 4 5 > >> 1 Siphoning Hidden-Web Data through Keyword-Based Interfaces Summary: automatically reconstruct a collection...

  17. automatic flow-through control: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic or controlled processing, depending Logan, Gordon D. 43 Declarative Camera Control for Automatic Cinematography CiteSeer Summary: Animations generated by interactive...

  18. automatic audio-conference service: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for patients with serious illness Mohaghegh, Shahab 2 AUTOMATIC TAG IDENTIFICATION IN WEB SERVICE DESCRIPTIONS Physics Websites Summary: AUTOMATIC TAG IDENTIFICATION IN WEB...

  19. Automatic feed system for ultrasonic machining

    DOE Patents [OSTI]

    Calkins, Noel C. (Los Alamos, NM)

    1994-01-01T23:59:59.000Z

    Method and apparatus for ultrasonic machining in which feeding of a tool assembly holding a machining tool toward a workpiece is accomplished automatically. In ultrasonic machining, a tool located just above a workpiece and vibrating in a vertical direction imparts vertical movement to particles of abrasive material which then remove material from the workpiece. The tool does not contact the workpiece. Apparatus for moving the tool assembly vertically is provided such that it operates with a relatively small amount of friction. Adjustable counterbalance means is provided which allows the tool to be immobilized in its vertical travel. A downward force, termed overbalance force, is applied to the tool assembly. The overbalance force causes the tool to move toward the workpiece as material is removed from the workpiece.

  20. Crutcher introduces new automatic welding system

    SciTech Connect (OSTI)

    Not Available

    1982-04-01T23:59:59.000Z

    Designed for pipe over 16 in. but suitable for smaller diameters if modified slightly, a new automatic welding system uses the metal inert gas process to weld the root bead from the outside with a specially designed backup ring that adapts to a standard internal pipe clamp, making internal welding unnecessary. Individual welding machines travel on flexible tracks that are positioned by a track-locating device; two machines are required at each welding station. Particularly applicable to lay-barge operations, the system consists of (1) a pipe-facing machine, (2) a diesel-driven hydraulic power unit, (3) a carriage track, (4) an air-driven, air-operated, simplified pipe clamp, and (5) a welding bug assembly consisting of a carriage with drive unit, welding head, oscillator, and wire spool mount with drag-brake assembly.

  1. Automatic identification of abstract online groups

    DOE Patents [OSTI]

    Engel, David W; Gregory, Michelle L; Bell, Eric B; Cowell, Andrew J; Piatt, Andrew W

    2014-04-15T23:59:59.000Z

    Online abstract groups, in which members aren't explicitly connected, can be automatically identified by computer-implemented methods. The methods involve harvesting records from social media and extracting content-based and structure-based features from each record. Each record includes a social-media posting and is associated with one or more entities. Each feature is stored on a data storage device and includes a computer-readable representation of an attribute of one or more records. The methods further involve grouping records into record groups according to the features of each record. Further still the methods involve calculating an n-dimensional surface representing each record group and defining an outlier as a record having feature-based distances measured from every n-dimensional surface that exceed a threshold value. Each of the n-dimensional surfaces is described by a footprint that characterizes the respective record group as an online abstract group.

  2. Algorithms for the Automatic Identification of MARFEs and UFOs in JET Database of Visible Camera Videos

    E-Print Network [OSTI]

    Algorithms for the Automatic Identification of MARFEs and UFOs in JET Database of Visible Camera Videos

  3. automatic thermoluminescent dosimetry: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A&M University - TxSpace Summary: AC-1 were automatic data storage, highly reproducible heating ramps, an excellent infrared light filter, and a unique feature to a single...

  4. Automatically clustering similar units for unit selection in speech synthesis.

    E-Print Network [OSTI]

    Black, Alan W; Taylor, Paul A

    1997-01-01T23:59:59.000Z

    This paper describes a new method for synthesizing speech by concatenating sub-word units from a database of labelled speech. A large unit inventory is created by automatically clustering units of the same phone class ...

  5. Experience with automatic reactor control at EBR-II

    SciTech Connect (OSTI)

    Lehto, W.K.; Larson, H.A.; Christensen, L.J.

    1985-01-01T23:59:59.000Z

    Satisfactory operation of the ACRDS has extended the capabilities of EBR-II to a transient test facility, achieving automatic transient control. Test assemblies can now be irradiated in transient conditions overlapping the slower transient capability of the TREAT reactor.

  6. Comparison of generality based algorithm variants for automatic taxonomy generation

    E-Print Network [OSTI]

    Madnick, Stuart E.

    We compare a family of algorithms for the automatic generation of taxonomies by adapting the Heymann-algorithm in various ways. The core algorithm determines the generality of terms and iteratively inserts them in a growing ...

  7. Comparison of Generality Based Algorithm Variants for Automatic Taxonomy Generation

    E-Print Network [OSTI]

    Henschel, Andreas

    We compare a family of algorithms for the automatic generation of taxonomies by adapting the Heymannalgorithm in various ways. The core algorithm determines the generality of terms and iteratively inserts them in a growing ...

  8. Automatic calibration of modulated fractional-N frequency synthesizers

    E-Print Network [OSTI]

    McMahill, Dan

    2001-01-01T23:59:59.000Z

    The focus of this research has been the development of a low power, radio frequency transmitter architecture. Specifically, a technique for in service automatic calibration of a modulated phase locked loop (PLL) frequency ...

  9. automatic reference flow: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Paris-Sud XI, Universit de 8 Automatic Information Flow Analysis of Business Process Models CiteSeer Summary: Abstract. We present an automated and efficient approach for the...

  10. Large-margin Gaussian mixture modeling for automatic speech recognition

    E-Print Network [OSTI]

    Chang, Hung-An, Ph. D. Massachusetts Institute of Technology

    2008-01-01T23:59:59.000Z

    Discriminative training for acoustic models has been widely studied to improve the performance of automatic speech recognition systems. To enhance the generalization ability of discriminatively trained models, a large-margin ...

  11. automatic car identification: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (ns-2). We have developed it to verify CarRing II's basic concepts, and to explore Zachmann, Gabriel 100 Automatic Landmarking For Building Biological CiteSeer Summary: In this...

  12. Automatically Generating Symbolic Prefetches for Distributed Transactional Memories

    E-Print Network [OSTI]

    Boyer, Edmond

    Automatically Generating Symbolic Prefetches for Distributed Transactional Memories Alokika Dash and Brian Demsky University of California, Irvine Abstract. Developing efficient distributed applications for distributed applications. We propose a new approach to prefetching, symbolic prefetching, that can prefetch

  13. Security Requirements for Classified Automatic Data Processing Systems

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1985-07-10T23:59:59.000Z

    To establish and describe the computer security program for classified automatic data processing (ADP) systems at the Department of Energy (DOE) Headquarters. This directive does not cancel another directive. Canceled by DOE N 251.9.

  14. The Effects of Automatic Emotion Regulation on the Desirability Bias

    E-Print Network [OSTI]

    Bench, Shane William

    2011-08-08T23:59:59.000Z

    The goal of the present investigation was to explore the effects of automatic emotion regulation on the desirability bias. The desirability bias is the tendency to believe that one will experience desirable outcomes and not experience undesirable...

  15. automatic blood pressure: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    o Reinfuse the patient's blood slowly, no faster than 1mL per second, by pressing the plunger back Kay, Mark A. 325 Automatic Detection of Blood versus non-Blood Regions on...

  16. Using automatically collected data for bus service and operations planning

    E-Print Network [OSTI]

    Shireman, Matthew Thomas

    2011-01-01T23:59:59.000Z

    Transit agencies have traditionally used manual data to measure performance and plan service, but many transit agencies now fulfill these tasks by using automated data collection systems (ADCS), including Automatic Vehicle ...

  17. VEE-0043- In the Matter of Greenville Automatic Gas Company

    Broader source: Energy.gov [DOE]

    On March 11, 1997, Greenville Automatic Gas Company (Greenville) filed an Application for Exception with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE). In its...

  18. AUTOMATIC GENERATION OF OPTIMAL CONTROLLERS THROUGH MODEL CHECKING TECHNIQUES

    E-Print Network [OSTI]

    Tronci, Enrico

    AUTOMATIC GENERATION OF OPTIMAL CONTROLLERS THROUGH MODEL CHECKING TECHNIQUES Giuseppe Della Penna Keywords: Controller Synthesis, Controller Optimization, Model Checking, Nonlinear Systems Abstract: We INTRODUCTION Control systems (or, shortly, controllers) are small hardware/software components that control

  19. Adaptive control of hydraulic shift actuation in an automatic transmission

    E-Print Network [OSTI]

    Thornton, Sarah Marie

    2013-01-01T23:59:59.000Z

    A low-order dynamic model of a clutch for hydraulic control in an automatic transmission is developed by separating dynamics of the shift into four regions based on clutch piston position. The first three regions of the ...

  20. Automatic target recognition apparatus and method

    DOE Patents [OSTI]

    Baumgart, Chris W. (Santa Fe, NM); Ciarcia, Christopher A. (Los Alamos, NM)

    2000-01-01T23:59:59.000Z

    An automatic target recognition apparatus (10) is provided, having a video camera/digitizer (12) for producing a digitized image signal (20) representing an image containing therein objects which objects are to be recognized if they meet predefined criteria. The digitized image signal (20) is processed within a video analysis subroutine (22) residing in a computer (14) in a plurality of parallel analysis chains such that the objects are presumed to be lighter in shading than the background in the image in three of the chains and further such that the objects are presumed to be darker than the background in the other three chains. In two of the chains the objects are defined by surface texture analysis using texture filter operations. In another two of the chains the objects are defined by background subtraction operations. In yet another two of the chains the objects are defined by edge enhancement processes. In each of the analysis chains a calculation operation independently determines an error factor relating to the probability that the objects are of the type which should be recognized, and a probability calculation operation combines the results of the analysis chains.

  1. An automatic control system for a laboratory precipitation process

    E-Print Network [OSTI]

    Burnett, Mary Alice

    1986-01-01T23:59:59.000Z

    AN AUTOMATIC CONTROL SYSTEM FOR A LABORATORY PRECIPITATION PROCESS A Thesis by MARY ALICE BURNETT Submitted to the Graduate College of Texas A 8 M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May... 1986 Major Subject: Civil Engineering AN AUTOMATIC CONTROL SYSTEM FOR A LABORATORY PRECIPITATION PROCESS A Thesis MARY ALICE BURNETT Approved as to style and content by: Bill Batchelor (Chairman of Committee) Donald L. Reddell (Member) J...

  2. 10-Dim Einstein spaces made up on basis of 6-Dim Ricci-flat spaces and 4-Dim Einstein spaces

    E-Print Network [OSTI]

    Valery Dryuma

    2006-06-09T23:59:59.000Z

    Some examples of ten-dimensional vacuum Einstein spaces made up on basis of four-dimensional Ricci-flat spaces and six-dimensional Ricci-flat spaces defined by solutions of the Sin-Gordon equation are constructed. The properties of geodesics for such type of the spaces are discussed

  3. Automatic Analysis and Synthesis of Controllers for Dynamical Systems Based On P

    E-Print Network [OSTI]

    Zhao, Feng

    1992-09-01T23:59:59.000Z

    I present a novel design methodology for the synthesis of automatic controllers, together with a computational environment---the Control Engineer's Workbench---integrating a suite of programs that automatically analyze ...

  4. Design of an Automatic Landing System for the Meridian UAV using Fuzzy Logic

    E-Print Network [OSTI]

    Royer, David Andrew

    2010-04-22T23:59:59.000Z

    antennas attached below the wings. Fuzzy logic is determined the ideal application for an automatic landing controller based on its ability to control uncertain and nonlinear systems. Using fuzzy logic, a longitudinal automatic landing controller...

  5. AUTOMATIC RECONSTRUCTION OF LARGE-SCALE VIRTUAL ENVIRONMENT FOR INTELLIGENT

    E-Print Network [OSTI]

    Tokyo, University of

    SYSTEMS SIMULATION Khairil Azmi, Shintaro Ono, Masataka Kagesawa, Katsushi Ikeuchi Institute of Industrial important applications in ITS (Intelligent Transportation Systems). This paper introduces an automatic simulations have been thought of being one of its major application areas. The development of tools

  6. Feature based volume decomposition for automatic hexahedral mesh generation

    SciTech Connect (OSTI)

    LU,YONG; GADH,RAJIT; TAUTGES,TIMOTHY J.

    2000-02-21T23:59:59.000Z

    Much progress has been made through these years to achieve automatic hexahedral mesh generation. While general meshing algorithms that can take on general geometry are not there yet; many well-proven automatic meshing algorithms now work on certain classes of geometry. This paper presents a feature based volume decomposition approach for automatic Hexahedral Mesh generation. In this approach, feature recognition techniques are introduced to determine decomposition features from a CAD model. The features are then decomposed and mapped with appropriate automatic meshing algorithms suitable for the correspondent geometry. Thus a formerly unmeshable CAD model may become meshable. The procedure of feature decomposition is recursive: sub-models are further decomposed until either they are matched with appropriate meshing algorithms or no more decomposition features are detected. The feature recognition methods employed are convexity based and use topology and geometry information, which is generally available in BREP solid models. The operations of volume decomposition are also detailed in the paper. The final section, the capability of the feature decomposer is demonstrated over some complicated manufactured parts.

  7. Monitoring Message Streams: Algorithmic Methods for Automatic Processing of

    E-Print Network [OSTI]

    Monitoring Message Streams: Algorithmic Methods for Automatic Processing of Messages April 27, 2003 of monitoring message streams is decomposed into problems in com pression, representation, matching, learning. The project seeks to advance the state of the art for filtering streams of text messages, and identifying

  8. automatic cough analyser: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic cough analyser First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Cough CiteSeer Summary:...

  9. AUTOMATIC PARALLELIZATION OF OBJECT ORIENTED MODELS ACROSS METHOD AND

    E-Print Network [OSTI]

    Zhao, Yuxiao

    was done on the system only. Keywords: Modelica, automatic parallelization. Presenting Author's biography and Modelica Modelica is a rather new language for equation-based object-oriented mathematical modeling which object- oriented modeling languages. Modelica is intended to become a de facto standard. It allows

  10. Automatic Detection of Defects in Riveted Lapjoints using Eddy Current

    E-Print Network [OSTI]

    Automatic Detection of Defects in Riveted Lap璲oints using Eddy Current Fredrik Lingvall Tadeusz originating from rivet holes in a riveted lap璲oint using eddy current (EC) inspection is presented consisted of median filtering, rotation and de璪iasing of the eddy current pattern. The rotation

  11. Marshalgen: A Package for Semi-Automatic Marshaling of Objects

    E-Print Network [OSTI]

    Cooperman, Gene

    Marshalgen: A Package for Semi-Automatic Marshaling of Objects Gene Cooperman , Ning Ke gene,nke,maggiewu @ccs.neu.edu Phone: 617-373-8686 FAX: 617-373-5121 Abstract-- Marshaling systems impose a significant burden on the programmer for describing the marshaling of complex, recursive

  12. Marshalgen: A Package for SemiAutomatic Marshaling of Objects

    E-Print Network [OSTI]

    Cooperman, Gene

    Marshalgen: A Package for SemiAutomatic Marshaling of Objects Gene Cooperman 1 , Ning Ke fgene,nke,maggiewug@ccs.neu.edu Phone: 6173738686 FAX: 6173735121 Abstract--- Marshaling systems impose a significant burden on the programmer for describing the marshaling of complex, recursive

  13. A Set of Computer Aided Automatic Control Experiments

    E-Print Network [OSTI]

    Erdem, Erkut

    , dynamics, frequency response, and key techniques in the closed loop controller design such as PID, pole is highlighted together with the possibilities of implementing various models and controllers at differentA Set of Computer Aided Automatic Control Experiments for Undergraduate Students YUSUF BU GDAY

  14. automatic test equipment: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic test equipment First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Test and Test Equipment Joshua...

  15. Simulation of the TREAT-Upgrade Automatic Reactor Control System

    SciTech Connect (OSTI)

    Lipinski, W.C.; Kirsch, L.W.; Valente, A.D.

    1984-01-01T23:59:59.000Z

    This paper describes the design of the Automatic Reactor Control System (ARCS) for the Transient Reactor Test Facility (TREAT) Upgrade. A simulation was used to facilitate the ARCS design and to completely test and verify its operation before installation at the TREAT facility.

  16. Green index in semigroups: Generators, presentations, and automatic structures

    E-Print Network [OSTI]

    Cain, Alan J.

    Green index in semigroups: Generators, presentations, and automatic structures Alan J. Cain, Robert@mcs.st-and.ac.uk This is a preprint of the article published as: Semigroup Forum, , no. (), pp. . : ./s---. : . The Green index called the relative Sch黷zenberger group. If the Rees index |S \\ T| is finite, T also has finite Green

  17. DEVELOPMENT OF A HIGH EFFICIENCY, AUTOMATIC DEFROSTING REFRIGERATOR-FREEZER

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    #12;DEVELOPMENT OF A HIGH EFFICIENCY, AUTOMATIC DEFROSTING REFRIGERATOR-FREEZER Richard F. Topping-efficient refrigerator- freezer prototype involving the Department of Energy's Oak Ridge National Laboratory, Arthur D. Little, Inc., and Amana Refrigeration, Inc. The project was initiated in 1977 by Oak Ridge National

  18. Automatic Clustering of Grid Nodes Department of Electrical and

    E-Print Network [OSTI]

    Subhlok, Jaspal

    Automatic Clustering of Grid Nodes Qiang Xu Department of Electrical and Computer Engineering Science University of Houston Houston, Texas 77204 Email: jaspal@uh.edu Abstract-- In a grid to an efficient, scalable and portable method of clustering grid nodes and building a distance map among clusters

  19. Research Article Automatic Road Pavement Assessment with Image Processing: Review

    E-Print Network [OSTI]

    Boyer, Edmond

    Research Article Automatic Road Pavement Assessment with Image Processing: Review and Comparison describe the proposed method to detect fine defects in pavement surface. This approach is based on a multi for evaluating this difficult task the road pavement crack detection is introduced. Finally, the proposed

  20. INTERNET EVOLUTION AND PROGRESS IN FULL AUTOMATIC FRENCH LANGUAGE MODELLING

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    .Vaufreydaz, Mathias.Gery}@imag.fr Abstract The World Wide Web is the greatest information space unseen until now" evaluation set, show that word accuracy increase from 51% up to 62.30% using two different models automatically calculated on Web corpora. The first corpus was gathered at the beginning of 1999 and the last one

  1. Automatic Radar Antenna Scan Type Recognition in Electronic

    E-Print Network [OSTI]

    Barshan, Billur

    Automatic Radar Antenna Scan Type Recognition in Electronic Warfare BILLUR BARSHAN BAHAEDDIN ERAVCI in electronic warfare (EW). The stages of the algorithm are scan period estimation, preprocessing (normalization Continuous-wave EW Electronic warfare EM Electromagnetic LFM Linear frequency modulation DTW Dynamic time

  2. Automatic Detection of Treatment Relationships for Patent Retrieval

    E-Print Network [OSTI]

    C醨denas, Alfonso F.

    Automatic Detection of Treatment Relationships for Patent Retrieval Aaron Chu UCLA Computer Science Department Los Angeles, California 90024 aaronc@ucla.edu Shigeyuki Sakurai1 4 th Patent Examination Department Japan Patent Office Tokyo, Japan sakurai-shigeyuki@jpo.go.jp Alfonso F. Cardenas UCLA Computer

  3. Enhancing Patent Expertise through Automatic Matching with Scientific Papers

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Enhancing Patent Expertise through Automatic Matching with Scientific Papers Kafil Hajlaoui of scientific papers, developed in the context of an international patents classification plan related in their task of evaluation of the originality and novelty of a patent, by of- fering to the latter the most

  4. SEMI-AUTOMATIC WEB SERVICE GENERATION AND CLASSIFICATION

    E-Print Network [OSTI]

    SEMI-AUTOMATIC WEB SERVICE GENERATION AND CLASSIFICATION Automated assistance to the web service of semantic web techniques with web service technologies has enabled the emergence of so-called semantic web and classification of web services. Key words: semantic web services; web service generation; web service

  5. Automatic Extraction of Cartographic Information from Airborne Interferometric SAR Data

    E-Print Network [OSTI]

    Mayer, Helmut A.

    Automatic Extraction of Cartographic Information from Airborne Interferometric SAR Data Reinhold cartographic feature extraction by the airborne AeS--1 instrument is presented. We extract regions corresponding to cartographic features for the classes built--up area, forest, water and open area. Water

  6. Leica EM AFS2 Automatic Freeze Substitution System

    E-Print Network [OSTI]

    Chapman, Michael S.

    " excludes humidity and oxygen Fast UV polymerization with LED UV lamp Flexibility Any choice is polymerized under UV light in the EM AFS2 and can be cut and immuno labelled. LED UV lamp FS chamber with new. An integrated LED UV lamp allows immediate polymerization of the samples. Automatic process One step

  7. ON FEATURE BASED AUTOMATIC CLASSIFICATION OF SINGLE AND MULTITONE SIGNALS

    E-Print Network [OSTI]

    Arabshahi, Payman

    ON FEATURE BASED AUTOMATIC CLASSIFICATION OF SINGLE AND MULTITONE SIGNALS Arindam K. Das, Payman of interest has not been previ- ously observed; it is not part of a library of known signals; and no automated demonstrating the feasibility of the above features for au- tomatic classification purposes of single

  8. Automatic Tissue Classification for the Human Head from Multispectral MRI

    E-Print Network [OSTI]

    Utah, University of

    1 Automatic Tissue Classification for the Human Head from Multispectral MRI Tolga Tasdizen, David for classifying multispectral MR scans of the human head into nine tissue classes. User initialization is adopted. #12;Chapter 1 Introduction Classification of head magnetic resonance imaging (MRI) data

  9. UNSUPERVISED SEGMENTATION FOR AUTOMATIC DETECTION OF BRAIN TUMORS IN MRI

    E-Print Network [OSTI]

    Lef鑦re, S閎astien

    a pre-segmentation to ex- tract the brain from the head. Then, a second segmentation is done insideUNSUPERVISED SEGMENTATION FOR AUTOMATIC DETECTION OF BRAIN TUMORS IN MRI A.S. Capelle, O. Alata, C- thod for magnetic resonance images. The aim of this seg- mentation is to divide the brain

  10. Automatic selection of tuning parameters in wind power prediction

    E-Print Network [OSTI]

    Automatic selection of tuning parameters in wind power prediction Lasse Engbo Christiansen (lec Report number: IMM-Technical Report-2007-12 Project title: Intelligent wind power prediction systems PSO The wind power forecasting system developed at DTU - the Wind Power Prediction Tool (WPPT) - predicts

  11. Ris-M-2311 AUTOMATIC FAULT TREE CONSTRUCTION WITH RIKKE

    E-Print Network [OSTI]

    Ris-M-2311 Vol. 2 AUTOMATIC FAULT TREE CONSTRUCTION WITH RIKKE A COMPENDIUM OF EXAMPLES. VOLUME 2. CONTROL AND SAFETY LOOPS. J.R. Taylor Abstract. This second volume describes the construction of fault In this volume, examples of HIKKE fault tree construction including loops are given. The principles involved were

  12. Automatic setup of recommended connections for online searching

    E-Print Network [OSTI]

    Painter, Kevin

    the recommended Connections. #12;Information Services 4 July 2013 7. Select a database to search and enter search terms in the search boxes 8. Select the number of results to retrieve The records will appear in EndnoteAutomatic setup of recommended connections for online searching EndNote X6 #12;Information Services

  13. Towards automatic verification of ladder logic Bohumir Zoubek

    E-Print Network [OSTI]

    Oxford, University of

    Birmingham, B15 2TT United Kingdom Email: mzk@cs.bham.ac.uk Abstract-- Control system programs are usually techniques of automatic verification to a control program written in ladder logic. A model is constructed procedures for control programs. I. INTRODUCTION Control systems are used in many applications of process

  14. automatic brain tumor: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic brain tumor First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 UNSUPERVISED SEGMENTATION FOR...

  15. TOWARD AUTOMATIC BLOOD SPATTER ANALYSIS IN CRIME SCENES

    E-Print Network [OSTI]

    Martin, Ralph R.

    TOWARD AUTOMATIC BLOOD SPATTER ANALYSIS IN CRIME SCENES A.R. Shen, G.J. Brostow, R. Cipolla: Blood Spatter, Origin Localisation, Metrology Abstract Some scenes of violent crime contain blood stains. Blood spatter stains occur when blood falls passively due to force being applied to a body

  16. Genetic Programming Based Automatic Gait Generation for Quadruped Robots

    E-Print Network [OSTI]

    Fernandez, Thomas

    Descriptors I.2.9 [Artificial Intelligence]: Robotics General Terms Algorithms, Design, Performance KeywordsGenetic Programming Based Automatic Gait Generation for Quadruped Robots Kisung Seo Electronic a new approach to develop a fast gait for quadruped robot using genetic programming (GP). Several recent

  17. automatic carbon source: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatic carbon source First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Federal Funding Sources of...

  18. Towards the Automatic Mapping of ASSIST Applications for the Grid

    E-Print Network [OSTI]

    Benoit, Anne

    Towards the Automatic Mapping of ASSIST Applications for the Grid Marco Aldinucci1 and Anne Benoit2. In the present work, we address the problem of the mapping of a high-level grid application onto according to a suitable mapping onto grid platforms. These may be highly heterogeneous in architecture

  19. Accurate Visual Features for Automatic Tag Correction in Videos

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Accurate Visual Features for Automatic Tag Correction in Videos Hoang-Tung Tran, Elisa Fromont-Etienne, Fr Abstract. We present a new system for video auto tagging which aims at correcting the tags provided by users for videos uploaded on the In- ternet. Unlike most existing systems, in our proposal, we

  20. Automatic Parallelization of Hand Written Automotive Engine Control

    E-Print Network [OSTI]

    Kasahara, Hironori

    Automatic Parallelization of Hand Written Automotive Engine Control Codes Using OSCAR Compiler Dan approach to realize the next- generation automobiles integrated control system. However, automotive-core processors for a long time. This paper proposes to parallelize an automotive engine crankshaft control

  1. Optimal Demand Response Capacity of Automatic Lighting Control

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    . To remedy this problem, different demand side management programs have been proposed to shape the energy prior studies have extensively studied the capacity of offering demand response in buildings and office buildings. Keywords: Demand response, automatic lighting control, commercial and office buildings

  2. Model for Evolutionary Technology An Automatically Defined Terminal Approach

    E-Print Network [OSTI]

    Fernandez, Thomas

    to satisfy consumer pref- erences on the demand side and lower production costs of products on the supply automatically defined terminal (ADT) to keep ready and stable building blocks growing into com- plex structure. INTRODUCTION Many fields including biology, design, engineering, manage- ment science, and complex adaptive

  3. Automatic Mobile Robot Control and Indication Method Using Augmented Reality Technology

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Automatic Mobile Robot Control and Indication Method Using Augmented Reality Technology Koji Ohmori and remote indication using the augmented reality technology. Keywords: mobile robot, automatic control, Kobe 658-8501, Japan kunio@konan-u.ac.jp Abstract. A mobile robot is an automatic machine

  4. Automatic Synthesis of Robust Embedded Control Software Tichakorn Wongpiromsarn, Ufuk Topcu and Richard M. Murray

    E-Print Network [OSTI]

    Murray, Richard M.

    science and control to allow automatic synthesis of embedded control software for such systems (KaramanAutomatic Synthesis of Robust Embedded Control Software Tichakorn Wongpiromsarn, Ufuk Topcu a methodology for automatic synthesis of embedded control software that accounts for exogenous disturbances

  5. 1630 IEEE TRANSACTIONS ON AUTOMATIC CONTROL, VOL. 43, NO. 11, NOVEMBER 1998 ACKNOWLEDGMENT

    E-Print Network [OSTI]

    Kwatny, Harry G.

    control of failure prone manufacturing systems," IEEE Trans. Automat. Contr., vol. 39, pp. 1875颅1880, 1994, "Optimal control of production rate in a failure prone manufacturing system," IEEE Trans. Automat. Contr1630 IEEE TRANSACTIONS ON AUTOMATIC CONTROL, VOL. 43, NO. 11, NOVEMBER 1998 ACKNOWLEDGMENT

  6. IEEE TRANSACTIONS ON AUTOMATIC CONTROL, VOL. 44, NO. 3, MARCH 1999 583 V. CONCLUSION

    E-Print Network [OSTI]

    Anantharam, Venkat

    , "H1 control for nonlinear systems via output feedback," IEEE Trans. Automat. Contr., vol. 38, pp. 546 systems," IEEE Trans. Automat. Contr., vol. 37, pp. 12831293, 1992. [4] A. Isidori, "H1 control via碿, and W. R. Perkins, "Design of reliable control systems," IEEE Trans. Automat. Contr., vol. 37, pp. 290

  7. Automatic Synthesis of Control Software for an Industrial Automation Control System

    E-Print Network [OSTI]

    Tronci, Enrico

    Automatic Synthesis of Control Software for an Industrial Automation Control System Enrico Tronci1 experimental results show that for industrial au- tomation control systems automatic synthesis is a viable@univaq.it, http: univaq.it tronci Abstract We present a case study on automatic synthesis of control software from

  8. Hybrid Automatic Repeat Request Scheme With Turbo Codes

    E-Print Network [OSTI]

    Jozef Hamorsky; Udo Wachsmann; Johannes B. Huber; Anton Cizmar

    A novel hybrid automatic repeat request system based on turbo codes, called turbo HARQ system, is proposed. The iterative turbo decoding procedure is exploited to request retransmission of not decodable blocks without the necessity of an outer error--detecting code. It is shown that the turbo HARQ scheme with code rate R c = 1=2 and interleaver length 1024 significantly outperforms the classical turbo coding scheme --- especially for low SNR --- without essential loss in throughput. 1 INTRODUCTION Automatic repeat request (ARQ) protocols are well--known methods to achieve high reliability in digital transmission schemes. The information is protected by an error--detecting block code. If the decoder detects an erroneous transmitted block, retransmission of this block is requested via a feedback channel which is assumed to be error--free throughout this paper. Additionally, the request is assumed to be repeated until the decoder detects error--free transmission. The great advantage of s...

  9. Mining Software Usage with the Automatic Library Tracking Database (ALTD)

    SciTech Connect (OSTI)

    Hadri, Bilel [ORNL; Fahey, Mark R [ORNL

    2013-01-01T23:59:59.000Z

    Tracking software usage is important for HPC centers, computer vendors, code developers and funding agencies to provide more efficient and targeted software support, and to forecast needs and guide HPC software effort towards the Exascale era. However, accurately tracking software usage on HPC systems has been a challenging task. In this paper, we present a tool called Automatic Library Tracking Database (ALTD) that has been developed and put in production on several Cray systems. The ALTD infrastructure prototype automatically and transparently stores information about libraries linked into an application at compilation time and also the executables launched in a batch job. We will illustrate the usage of libraries, compilers and third party software applications on a system managed by the National Institute for Computational Sciences.

  10. Automatic reactor power control for a pressurized water reactor

    SciTech Connect (OSTI)

    Jungin Choi (Kyungwon Univ. (Korea, Republic of)); Yungjoon Hah (Korea Atomic Energy Research Inst., Daejeon (Korea, Republic of)); Unchul Lee (Seoul National Univ. (Korea, Republic of))

    1993-05-01T23:59:59.000Z

    An automatic reactor power control system is presented for a pressurized water reactor (PWR). The associated reactor control strategy is called mode K.' The new system implements a heavy-worth bank dedicated to axial shape control, independent of the existing regulating banks. The heavy bank provides a monotonic relationship between its motion and the axial shape change, which allows automatic control of the axial power distribution. Thus, the mode K enables precise regulation of both the reactivity and the power distribution, by using double closed-loop control of the reactor coolant temperature and the axial power difference. Automatic reactor power control permits the nuclear power plant to accommodate the load-follow operations, including frequency control, to respond to the grid requirements. The mode K reactor control concepts were tested using simulation responses of a Korean standardized 1,000-MW (electric) PWR. The simulation results illustrate that the mode K would be a practical reactor power control strategy for the increased automation of nuclear plants.

  11. Table Contents Page i 2013 Nonresidential Compliance Manual January 2014

    E-Print Network [OSTI]

    )................................................9 5.2.4 Requirements for Lighting Control Devices and Systems, Ballasts, and Luminaires.9 5....................................................................................23 5.4.3 Automatic Shut-OFF Controls ..................................................................................26 5.4.4 Mandatory Automatic Daylighting Controls

  12. Sustainability Assessment of the Robert E. Johnson State Office Building, Final Report, Revised April 2002

    E-Print Network [OSTI]

    Sylvester, K. E.; Song, S.; Haberl, J. S.; Turner, W. D.

    2002-01-01T23:59:59.000Z

    air needed for the print shop. For the lighting system, specially designed light shelves were installed on the south fa?ade of the building to project the daylight into the interior offices. Dimmable ballasts were installed in about 15... savings associated with the daylighting-dimming system were not considered. 1 These window blinds were requested by the building?s occupants who complained that they were unable to use their computers...

  13. Advanced fenestration systems for improved daylight performance

    E-Print Network [OSTI]

    Selkowitz, S.; Lee, E.S.

    1998-01-01T23:59:59.000Z

    technology for dynamic, smart glazings has the potential toSwitchable Glazing: Towards the Development of the Smart

  14. Does Daylight Savings Time Affect Traffic Accidents?

    E-Print Network [OSTI]

    Deen, Sophia 1988-

    2012-04-20T23:59:59.000Z

    in real time for a variety of reasons such as an unpredictably hot day or an outage at a power plant. The balancing market operates in real time to balance actual load and generation. Depending upon whether more or less power is needed than the day-ahead... map this model into a market with a day-ahead schedule followed by a balancing auction. We index the costs of generation (at time t) of the N firms in this market by {Cit (q), i = 1, . . . , N}. We take total demand ?Dt (p) = Dt (p)+ ?t to be the sum...

  15. Advanced fenestration systems for improved daylight performance

    E-Print Network [OSTI]

    Selkowitz, S.; Lee, E.S.

    1998-01-01T23:59:59.000Z

    SPIE Optical Materials Technology for Energy Efficiency andon Optical Materials Technology for Energy Efficiency andon Optical Materials Technology for Energy Efficiency and

  16. Experimental Evaluation of Innovative Wall Daylighting Systems

    E-Print Network [OSTI]

    Place, J. W.; Howard, T. C.; Paulos, S.; Chung, K.

    1988-01-01T23:59:59.000Z

    to deliver most of the light from the projecting mirror to the two inner spaces. One way of doing this without causing glare to the occupants is to project the light on the area of ceiling over the two spaces and allow the ceiling to serve aa a secondary.... Providing illumination in buildings using sunlight as a substitute for electric light is attractive for several reasons: 1. The solar illumination resource is substantial; during most working hours, the solar illumination on a building is several times...

  17. THE INTEGRATED APPROACH TIPS FOR DAYLIGHTING

    E-Print Network [OSTI]

    and was supported by the Commercial Buildings Partnership (CBP) Program, through the Assistant Secretary for Energy, Andrew McNeil, Cynthia Regnier, and Francis Rubinstein. The Commercial Building Partnerships (CBP to achieve dramatic energy savings in commercial buildings. Through the program, companies and organizations

  18. Daylighting systems for the Kuwait National Museum

    E-Print Network [OSTI]

    Ahn, Byoungsoo

    2005-08-29T23:59:59.000Z

    sky condition (Southeast gallery, 12:00 PM, Jun 21) .......................................................... 54 50 Iso-contour image under the clear sky and overcast sky condition (Southeast gallery, 12:00 PM, Jun 21...) .......................................................... 55 51 False color image under the clear sky and overcast sky condition (Southeast gallery, 12:00 PM, Dec 21).......................................................... 56 52 Iso-contour image under the clear sky and overcast sky...

  19. Energy 101: Daylighting | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField Campaign:INEAWaterCool Roofs Energy 101: Cool Roofs Addthis An

  20. Lighting and Daylighting Basics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data CenterEnergyGlossary ofHomeJC3 Bulletin Archive LabsAboutAbout UsHomes

  1. Times are in Mountain Daylight Savings Time

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy SolarRadioactive LiquidSavingsAugustPhase 2ATF Development

  2. Times are in Mountain Daylight Savings Time

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy SolarRadioactive LiquidSavingsAugustPhase 2ATF

  3. List of Daylighting Incentives | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOf Kilauea Volcano,LakefrontLighthouse SolarIListsource History

  4. Window Daylighting Demo | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your DensityEnergy U.S.-China Electric VehicleCenters | Department ofoftoMay 8,Energy Wind Vision:Window

  5. Advanced Facades, Daylighting, and Complex Fenestration Systems |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platform is alwaysISO 50001Energy Efficiency GrantsElectrocatalysts

  6. Window Daylighting Demo | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: SinceDevelopment | Department ofPartnerships ToolkitWasteWho WillWind Programof Energy

  7. Advanced Facades, Daylighting, and Complex Fenestration Systems

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1 AAccelerated agingDepartmentDevelopment and

  8. automatic gas meter-reading: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Last Page Topic Index 1 Neighborhood Watch: Security and Privacy Analysis of Automatic Meter Reading Systems Engineering Websites Summary: in transforming the current electrical...

  9. E-Print Network 3.0 - automatic vehicle location Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Remote Software Upload in Summary: 12;control of the vehicle to avoid collision and a vehicle automation system includes automatic... -to-day operations. Intelligent...

  10. E-Print Network 3.0 - automatic vehicle identification Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Remote Software Upload in Summary: 12;control of the vehicle to avoid collision and a vehicle automation system includes automatic... -to-day operations. Intelligent...

  11. E-Print Network 3.0 - automatic vehicle monitoring Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    group as well as generate... 12;control of the vehicle to avoid collision and a vehicle automation system includes automatic... -to-day operations. Intelligent...

  12. E-Print Network 3.0 - air conditioning automatic Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exhaust air... conditions. Because of these external demands, the American Society of Heating, Refrigerating and Air... monitors include a remote alarm signal andor automatic...

  13. Vehicle Technologies Office Merit Review 2014: System for Automatically Maintaining Pressure in a Commercial Truck Tire

    Broader source: Energy.gov [DOE]

    Presentation given by Goodyear at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about a system for automatically...

  14. Control System Design for Automatic Cavity Tuning Machines

    SciTech Connect (OSTI)

    Carcagno, R.; Khabiboulline, T.; Kotelnikov, S.; Makulski, A.; Nehring, R.; Nogiec, J.; Ross, M.; Schappert, W.; /Fermilab; Goessel, A.; Iversen, J.; Klinke, D.; /DESY

    2009-05-01T23:59:59.000Z

    A series of four automatic tuning machines for 9-cell TESLA-type cavities are being developed and fabricated in a collaborative effort among DESY, FNAL, and KEK. These machines are intended to support high-throughput cavity fabrication for construction of large SRF-based accelerator projects. Two of these machines will be delivered to cavity vendors for the tuning of XFEL cavities. The control system for these machines must support a high level of automation adequate for industrial use by non-experts operators. This paper describes the control system hardware and software design for these machines.

  15. Rapid automatic keyword extraction for information retrieval and analysis

    DOE Patents [OSTI]

    Rose, Stuart J (Richland, WA); Cowley,; Wendy E (Richland, WA); Crow, Vernon L (Richland, WA); Cramer, Nicholas O (Richland, WA)

    2012-03-06T23:59:59.000Z

    Methods and systems for rapid automatic keyword extraction for information retrieval and analysis. Embodiments can include parsing words in an individual document by delimiters, stop words, or both in order to identify candidate keywords. Word scores for each word within the candidate keywords are then calculated based on a function of co-occurrence degree, co-occurrence frequency, or both. Based on a function of the word scores for words within the candidate keyword, a keyword score is calculated for each of the candidate keywords. A portion of the candidate keywords are then extracted as keywords based, at least in part, on the candidate keywords having the highest keyword scores.

  16. State of research in automatic as-built modelling

    E-Print Network [OSTI]

    P?tr?ucean, Viorica; Armeni, Iro; Nahangi, Mohammad; Yeung, Jamie; Brilakis, Ioannis; Haas, Carl

    2015-02-03T23:59:59.000Z

    od an els ( han g as hav ode , Ge r po ubl s) are nt info on, inc ateria using o operab cceptan provide Creating an AB BIM requires two major steps: data collection, to t to perfor on, making pected eco impact, automatically generating AB BIMs from... building elements and their relation- ships2. Depending on the approach, different auxiliary tasks can be used to facilitate this process: #2; Geometric primitive detection: report if and where predefined simple geometric shapes appear in the given point...

  17. Wien Automatic System Planning (WASP) Package | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown ofNationwideWTEDBird, Idaho: EnergyWhitmanLinkButton Jump to:Wien Automatic

  18. Automatic Thread-Level Parallelization in the Chombo AMR Library

    SciTech Connect (OSTI)

    Christen, Matthias; Keen, Noel; Ligocki, Terry; Oliker, Leonid; Shalf, John; Van Straalen, Brian; Williams, Samuel

    2011-05-26T23:59:59.000Z

    The increasing on-chip parallelism has some substantial implications for HPC applications. Currently, hybrid programming models (typically MPI+OpenMP) are employed for mapping software to the hardware in order to leverage the hardware?s architectural features. In this paper, we present an approach that automatically introduces thread level parallelism into Chombo, a parallel adaptive mesh refinement framework for finite difference type PDE solvers. In Chombo, core algorithms are specified in the ChomboFortran, a macro language extension to F77 that is part of the Chombo framework. This domain-specific language forms an already used target language for an automatic migration of the large number of existing algorithms into a hybrid MPI+OpenMP implementation. It also provides access to the auto-tuning methodology that enables tuning certain aspects of an algorithm to hardware characteristics. Performance measurements are presented for a few of the most relevant kernels with respect to a specific application benchmark using this technique as well as benchmark results for the entire application. The kernel benchmarks show that, using auto-tuning, up to a factor of 11 in performance was gained with 4 threads with respect to the serial reference implementation.

  19. Reactor protection system with automatic self-testing and diagnostic

    DOE Patents [OSTI]

    Gaubatz, D.C.

    1996-12-17T23:59:59.000Z

    A reactor protection system is disclosed having four divisions, with quad redundant sensors for each scram parameter providing input to four independent microprocessor-based electronic chassis. Each electronic chassis acquires the scram parameter data from its own sensor, digitizes the information, and then transmits the sensor reading to the other three electronic chassis via optical fibers. To increase system availability and reduce false scrams, the reactor protection system employs two levels of voting on a need for reactor scram. The electronic chassis perform software divisional data processing, vote 2/3 with spare based upon information from all four sensors, and send the divisional scram signals to the hardware logic panel, which performs a 2/4 division vote on whether or not to initiate a reactor scram. Each chassis makes a divisional scram decision based on data from all sensors. Automatic detection and discrimination against failed sensors allows the reactor protection system to automatically enter a known state when sensor failures occur. Cross communication of sensor readings allows comparison of four theoretically ``identical`` values. This permits identification of sensor errors such as drift or malfunction. A diagnostic request for service is issued for errant sensor data. Automated self test and diagnostic monitoring, sensor input through output relay logic, virtually eliminate the need for manual surveillance testing. This provides an ability for each division to cross-check all divisions and to sense failures of the hardware logic. 16 figs.

  20. Automatic load follow control system for PWR plants

    SciTech Connect (OSTI)

    Nakakura, H.; Ishiguro, A.

    1987-01-01T23:59:59.000Z

    In Japan, load follow operation (daily load follow, automatic frequency control (AFC) operation, and governor free (GF) operation) of nuclear plants will be required in the near future to control grid frequency, as the ratio of nuclear plant electrical production to total grid production will increase. The AFC operation regulated power by demand from the central load dispatcher to control mainly the fringe component of the grid frequency fluctuation, and GF operation regulates power by turbine revolution or grid frequency to control mainly the cyclic component of grid frequency fluctuation. This paper deals with the automatic power distribution control system, which is important to load follow operation and possibly will be applied to pressurized water reactor (PWR) nuclear plants. The reactor control systems noted below are conventional design with some improvements for AFC/GF operation, so that the reactor operates the turbine as before: (1) rod control system (reactor power control); (2) pressurizer pressure control system; (3) pressurizer level control system; and (4) steam generator level control system.

  1. Automatic energy calibration algorithm for an RBS setup

    SciTech Connect (OSTI)

    Silva, Tiago F.; Moro, Marcos V.; Added, Nemitala; Rizzutto, Marcia A.; Tabacniks, Manfredo H. [Instituto de Fisica da Universidade de Sao Paulo, C.P. 66318, 05315-970 Sao Paulo, SP (Brazil)

    2013-05-06T23:59:59.000Z

    This work describes a computer algorithm for automatic extraction of the energy calibration parameters from a Rutherford Back-Scattering Spectroscopy (RBS) spectrum. Parameters like the electronic gain, electronic offset and detection resolution (FWHM) of a RBS setup are usually determined using a standard sample. In our case, the standard sample comprises of a multi-elemental thin film made of a mixture of Ti-Al-Ta that is analyzed at the beginning of each run at defined beam energy. A computer program has been developed to extract automatically the calibration parameters from the spectrum of the standard sample. The code evaluates the first derivative of the energy spectrum, locates the trailing edges of the Al, Ti and Ta peaks and fits a first order polynomial for the energy-channel relation. The detection resolution is determined fitting the convolution of a pre-calculated theoretical spectrum. To test the code, data of two years have been analyzed and the results compared with the manual calculations done previously, obtaining good agreement.

  2. Reactor protection system with automatic self-testing and diagnostic

    DOE Patents [OSTI]

    Gaubatz, Donald C. (Cupertino, CA)

    1996-01-01T23:59:59.000Z

    A reactor protection system having four divisions, with quad redundant sensors for each scram parameter providing input to four independent microprocessor-based electronic chassis. Each electronic chassis acquires the scram parameter data from its own sensor, digitizes the information, and then transmits the sensor reading to the other three electronic chassis via optical fibers. To increase system availability and reduce false scrams, the reactor protection system employs two levels of voting on a need for reactor scram. The electronic chassis perform software divisional data processing, vote 2/3 with spare based upon information from all four sensors, and send the divisional scram signals to the hardware logic panel, which performs a 2/4 division vote on whether or not to initiate a reactor scram. Each chassis makes a divisional scram decision based on data from all sensors. Automatic detection and discrimination against failed sensors allows the reactor protection system to automatically enter a known state when sensor failures occur. Cross communication of sensor readings allows comparison of four theoretically "identical" values. This permits identification of sensor errors such as drift or malfunction. A diagnostic request for service is issued for errant sensor data. Automated self test and diagnostic monitoring, sensor input through output relay logic, virtually eliminate the need for manual surveillance testing. This provides an ability for each division to cross-check all divisions and to sense failures of the hardware logic.

  3. AUTOMATIC HOT SPOT DETECTION AND SEGMENTATION IN WHOLE BODY FDG-PET IMAGES Haiying Guan1

    E-Print Network [OSTI]

    California at Santa Barbara, University of

    AUTOMATIC HOT SPOT DETECTION AND SEGMENTATION IN WHOLE BODY FDG-PET IMAGES Haiying Guan1 , Toshiro a system for automatic hot spots detection and segmentation in whole body FDG-PET images. The main in clinical PET images. 1.INTRODUCTION Positron emission tomography (PET) using fluorine-18 de- oxyglucose

  4. An Integrated Automatic Test Data Generation System A. Je erson O utt

    E-Print Network [OSTI]

    Offutt, Jeff

    An Integrated Automatic Test Data Generation System A. Je erson O utt Department of Computer Science Clemson University Clemson, SC 29634 January 21, 1996 Abstract The Godzilla automatic test data generator is an integrated collection of tools that implements a relatively new test data generation method

  5. An Integrated Automatic Test Data Generation System A. Jefferson Offutt \\Lambda

    E-Print Network [OSTI]

    Offutt, Jeff

    An Integrated Automatic Test Data Generation System A. Jefferson Offutt \\Lambda Department of Computer Science Clemson University Clemson, SC 29634 January 21, 1996 Abstract The Godzilla automatic test data generator is an integrated collection of tools that implements a relatively new test data

  6. ME 364L Automatic Control System Design ABET EC2000 syllabus

    E-Print Network [OSTI]

    Ben-Yakar, Adela

    Material (references): R. Dorf and R. Bishop, Modern Control Systems, Addison-Wesley, 8th edition, 1998. KME 364L Automatic Control System Design Page 1 ABET EC2000 syllabus ME 364L Automatic Control design; continuous and discrete time control. Prerequisite(s): ME 344 Dynamics Systems and Control

  7. Infuse: A Tool for Automatically Managing and Coordinating Source Changes in Large Systems

    E-Print Network [OSTI]

    Perry, Dewayne E.

    Infuse: A Tool for Automatically Managing and Coordinating Source Changes in Large Systems Dewayne changes occur outside the tool. In contrast, Infuse concentrates on the actual change process and provides facilities for both managing and coordinating source changes. Infuse provides facilities for automatically

  8. DEVELOPMENT OF AN AUTOMATIC DESIGN AND OPTIMIZATION SYSTEM FOR INDUSTRIAL SILENCERS

    E-Print Network [OSTI]

    Wang, Gaofeng Gary

    life-cycle costs, is not fully supported. This work documents the development of an automatic design1 DEVELOPMENT OF AN AUTOMATIC DESIGN AND OPTIMIZATION SYSTEM FOR INDUSTRIAL SILENCERS Lee Ming Wong and optimization system for industrial silencers. The developed system greatly reduces the production costs

  9. Some considerations about the automatic optimisation of parallel linear algebra routines ?

    E-Print Network [OSTI]

    Gim茅nez, Domingo

    factorisation, which his one of the basic routines used in the study of the behaviour of dense lineal algebraSome considerations about the automatic optimisation of parallel linear algebra routines ? Javier of the automatic optimisation of parallel linear algebra software, working mainly with two routines: the LU

  10. Automatic parallel parking and platooning to redistribute electric vehicles in a car-sharing application

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Automatic parallel parking and platooning to redistribute electric vehicles in a car subscribers , as well as the electric car-sharing system autolib, comprising 2000 vehicles, 1200 stations this imbalance, vehicle redistribution strategies must be elaborated. As automatic relocation cannot be in place

  11. An Automatic Load Sharing Approach for a DFIG Based Wind Generator in a Microgrid

    E-Print Network [OSTI]

    Pota, Himanshu Roy

    An Automatic Load Sharing Approach for a DFIG Based Wind Generator in a Microgrid M. A. Barik and H generator. An automatic load sharing approach for a doubly-fed induction generator (DFIG) based wind wind velocity. The load demand for the wind generator is determined based on the variation of its

  12. Behavioral/Systems/Cognitive Neural Correlates of the Automatic Processing of Threat

    E-Print Network [OSTI]

    Toronto, University of

    Behavioral/Systems/Cognitive Neural Correlates of the Automatic Processing of Threat Facial Signals threat. Attention was focused on either scenes or faces presented in a single overlapping display. Facial. These results suggest that automaticity is not funda- mental to the processing of all facial signals of threat

  13. Department of Mechanical and Nuclear Engineering Spring 2012 Automatic Plant Watering System

    E-Print Network [OSTI]

    Demirel, Melik C.

    PENNSTATE Department of Mechanical and Nuclear Engineering Spring 2012 Automatic Plant Watering System Overview The goal of this project was to design an automatic plant watering system for commercial in the soil of household plants and delivery water to those plants on a need-only basis. The overall design

  14. Automatic Testing of Reactive Systems \\Lambda Pascal Raymond, Xavier Nicollin, Nicolas Halbwachs y

    E-Print Network [OSTI]

    Halbwachs, Nicolas

    Automatic Testing of Reactive Systems \\Lambda Pascal Raymond, Xavier Nicollin, Nicolas Halbwachs y V'erimag z , Grenoble 颅 France Daniel Weber x Schneider Electric, Grenoble 颅 France Abstract This paper addresses the problem of automatizing the production of test sequences for reactive systems. We

  15. On the Failure of Power System Automatic Generation Control due to Measurement Noise

    E-Print Network [OSTI]

    Liberzon, Daniel

    understood, the electric grid could become more vulnerable to failures in both cyber and physical components-level automatic closed-loop control system over the IT infrastructure of a power system [1], is sensitive1 On the Failure of Power System Automatic Generation Control due to Measurement Noise Jiangmeng

  16. Automatic Scan Prescription for Brain MRI T. Ernst, L. Itti, L. Chang

    E-Print Network [OSTI]

    Itti, Laurent

    Automatic Scan Prescription for Brain MRI T. Ernst, L. Itti, L. Chang Harbor-UCLA Medical Center that allows the automatic prescription of brain MRI scans. This involves determination of the orientation of the current patient's brain, by matching his/her brain surface with a template brain surface. A desired

  17. Automatic Reformulation of Children's Search Queries Maarten van Kalsbeek, Joost de Wit, Dolf Trieschnigg,

    E-Print Network [OSTI]

    Hiemstra, Djoerd

    Terms Algorithms, Human Factors, Design Keywords Automatic Query Expansion, Search Behavior, 1 children may make. Most of the search engines offer only the possibility to enter a Boolean queryAutomatic Reformulation of Children's Search Queries Maarten van Kalsbeek, Joost de Wit, Dolf

  18. Automatic Conversion Software for the Safety Verification of Goal-based Control Programs

    E-Print Network [OSTI]

    Murray, Richard M.

    , an automatic software algorithm for converting goal network control programs into linear hybrid systemsAutomatic Conversion Software for the Safety Verification of Goal-based Control Programs Julia M. B. Braman and Richard M. Murray Abstract-- Fault tolerance and safety verification of control systems

  19. A Map-Reduce Parallel Approach to Automatic Synthesis of Control Software

    E-Print Network [OSTI]

    Tronci, Enrico

    A Map-Reduce Parallel Approach to Automatic Synthesis of Control Software Vadim Alimguzhin12 Systems are indeed Software Based Control Systems, i.e. control systems whose controller consists De- sign approaches for automatic synthesis of control software. Available algorithms and tools (e

  20. MyhillNerode Relations on Automatic Systems and the Completeness of Kleene Algebra

    E-Print Network [OSTI]

    Kozen, Dexter

    Myhill颅Nerode Relations on Automatic Systems and the Completeness of Kleene Algebra Dexter Kozen. It is well known that finite square matrices over a Kleene algebra again form a Kleene algebra. This is also infinite systems of inequalities over a Kleene algebra. Automatic systems are a special class of infinite