Powered by Deep Web Technologies
Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

E-Print Network 3.0 - automated teller machine Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

T. Svoboda and S. Teller (eds.) 116 12;0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 p... to the two-dimensional structure-from-motion Omnivis2004. P. Sturm, T. Svoboda and S. Teller (eds.)...

2

LOCATION OF BANKING AUTOMATIC TELLER MACHINES BASED ON CONVOLUTION  

E-Print Network (OSTI)

optimal location of gas stations, health care units, warehouses, police stations, and power plants, supermarkets, gas stations, and other high-traffic shopping areas are prime locations for ATM sites facilities", such as gas stations and automated teller machines [9]. Generally, customers do not regard

Aldajani, Mansour A.

3

Automated fiber pigtailing machine  

DOE Patents (OSTI)

The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

Strand, O.T.; Lowry, M.E.

1999-01-05T23:59:59.000Z

4

Virtual Machine in Automation Projects.  

E-Print Network (OSTI)

?? Virtual machine, as an engineering tool, has recently been introduced into automation projects in Tetra Pak Processing System AB. The goal of this paper… (more)

Xing, Xiaoyuan

2010-01-01T23:59:59.000Z

5

Specimen coordinate automated measuring machine/fiducial automated measuring machine  

SciTech Connect

The Specimen coordinate Automated Measuring Machine (SCAMM) and the Fiducial Automated Measuring Machine (FAMM) is a computer controlled metrology system capable of measuring length, width, and thickness, and of locating fiducial marks. SCAMM and FAMM have many similarities in their designs, and they can be converted from one to the other without taking them out of the hot cell. Both have means for: supporting a plurality of samples and a standard; controlling the movement of the samples in the +/- X and Y directions; determining the coordinates of the sample; compensating for temperature effects; and verifying the accuracy of the measurements and repeating as necessary. SCAMM and FAMM are designed to be used in hot cells.

Hedglen, Robert E. (Bethel Park, PA); Jacket, Howard S. (Pittsburgh, PA); Schwartz, Allan I. (Turtle Creek, PA)

1991-01-01T23:59:59.000Z

6

Chip breaking system for automated machine tool  

DOE Patents (OSTI)

The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

Arehart, Theodore A. (Clinton, TN); Carey, Donald O. (Oak Ridge, TN)

1987-01-01T23:59:59.000Z

7

Edward Teller  

NLE Websites -- All DOE Office Websites (Extended Search)

Edward Teller Edward Teller Still Shaking Up Science Today · For the Love of Science · Centennial Highlights Biographical Sketch · Resources with Additional Information Edward Teller, Director of LLNL 1958 - 1960 Edward Teller, 1958 Courtesy of Lawrence Livermore National Laboratory (LLNL) Still Shaking Up Science Today 'There is little doubt that Edward Teller is one of the towering figures of 20th-century physics. ... Although his early training was in chemical physics and spectroscopy, Teller has made substantial contributions to such diverse fields as nuclear physics, plasma physics, astrophysics, and statistical mechanics. Lawrence Livermore [National Laboratory] physicist Mort Weiss, a close friend, has written: "His work has shaped the nature of nuclear physics research and has left an indelible impression on that field. His wide-ranging, questing, and tenacious approach to research, not only in nuclear physics but in many other fields as well, has inspired generations of nuclear physicists." ...

8

Journees Automates Cellulaires 2008 (Uz`es), pp. 54-64 SOFIC ONE HEAD MACHINES  

E-Print Network (OSTI)

Journ´ees Automates Cellulaires 2008 (Uz`es), pp. 54-64 SOFIC ONE HEAD MACHINES A. GAJARDO-dimensional Turing machines with only one head is adopted. A subshift is associated to each Turing machine, and its properties are studied. The subshift consists in the set of sequences of symbols that the machine reads

Paris-Sud XI, Université de

9

16.459 Humans & Automation Seminar February 6, 2002  

E-Print Network (OSTI)

simulations Automated bank teller system design ACT-R Modeling problem solving and learning Various problem ­ To provide rapid prototype simulator to examine human operator performance as a function of human interface16.459 Humans & Automation Seminar February 6, 2002 Miwa Hayashi #12;!Human-Machine System Design

Goldwasser, Shafi

10

EDWARD TELLER  

Science Journals Connector (OSTI)

Physicist and key developer of the thermonuclear reaction is dead at 95 ... Teller was a major contributor to theoretical physics, from the development of quantum mechanics in the 1930s to more recent work on high-temperature superconductivity He was a principal of the World War II Manhattan Project and played key roles in the development of thermonuclear weapons, submarine-launched ballistic missiles, and missile defense. ...

WILLIAM SCHULZ

2003-09-15T23:59:59.000Z

11

Automation of Facility Management Processes Using Machine-to-Machine Technologies  

Science Journals Connector (OSTI)

The emergence of machine-to-machine (M2M) technologies as a business opportunity is based on the observation that there are many more machines and objects in the world than people and that an everyday object h...

Sudha Krishnamurthy; Omer Anson; Lior Sapir; Chanan Glezer…

2008-01-01T23:59:59.000Z

12

Automation of facility management processes using machine-to-machine technologies  

Science Journals Connector (OSTI)

The emergence of machine-to-machine (M2M) technologies as a business opportunity is based on the observation that there are many more machines and objects in the world than people and that an everyday object has more value when it is networked. In this ...

Sudha Krishnamurthy; Omer Anson; Lior Sapir; Chanan Glezer; Mauro Rois; Ilana Shub; Kilian Schloeder

2008-03-01T23:59:59.000Z

13

Automated real-time detection of defects during machining of ceramics  

DOE Patents (OSTI)

Apparatus for the automated real-time detection and classification of defects during the machining of ceramic components employs an elastic optical scattering technique using polarized laser light. A ceramic specimen is continuously moved while being machined. Polarized laser light is directed onto the ceramic specimen surface at a fixed position just aft of the machining tool for examination of the newly machined surface. Any foreign material near the location of the laser light on the ceramic specimen is cleared by an air blast. As the specimen is moved, its surface is continuously scanned by the polarized laser light beam to provide a two-dimensional image presented in real-time on a video display unit, with the motion of the ceramic specimen synchronized with the data acquisition speed. By storing known ``feature masks`` representing various surface and sub-surface defects and comparing measured defects with the stored feature masks, detected defects may be automatically characterized. Using multiple detectors, various types of defects may be detected and classified. 14 figs.

Ellingson, W.A.; Sun, J.

1997-11-18T23:59:59.000Z

14

Automated real-time detection of defects during machining of ceramics  

DOE Patents (OSTI)

Apparatus for the automated real-time detection and classification of defects during the machining of ceramic components employs an elastic optical scattering technique using polarized laser light. A ceramic specimen is continuously moved while being machined. Polarized laser light is directed onto the ceramic specimen surface at a fixed position just aft of the machining tool for examination of the newly machined surface. Any foreign material near the location of the laser light on the ceramic specimen is cleared by an air blast. As the specimen is moved, its surface is continuously scanned by the polarized laser light beam to provide a two-dimensional image presented in real-time on a video display unit, with the motion of the ceramic specimen synchronized with the data acquisition speed. By storing known "feature masks" representing various surface and sub-surface defects and comparing measured defects with the stored feature masks, detected defects may be automatically characterized. Using multiple detectors, various types of defects may be detected and classified.

Ellingson, William A. (Naperville, IL); Sun, Jiangang (Westmont, IL)

1997-01-01T23:59:59.000Z

16

Design of an automated sorting and orienting machine for electronic pins  

E-Print Network (OSTI)

At the power electronics manufacturer SynQor, the printed circuit board (PCB) assembly line is fully automated with the exception of the step which inserts electronic pins into the PCBs. Past attempts to automate this ...

Chang, Michelle Sueway

2012-01-01T23:59:59.000Z

17

Automated beam placement for breast radiotherapy using a support vector machine based algorithm  

SciTech Connect

Purpose: To develop an automated beam placement technique for whole breast radiotherapy using tangential beams. We seek to find optimal parameters for tangential beams to cover the whole ipsilateral breast (WB) and minimize the dose to the organs at risk (OARs). Methods: A support vector machine (SVM) based method is proposed to determine the optimal posterior plane of the tangential beams. Relative significances of including/avoiding the volumes of interests are incorporated into the cost function of the SVM. After finding the optimal 3-D plane that separates the whole breast (WB) and the included clinical target volumes (CTVs) from the OARs, the gantry angle, collimator angle, and posterior jaw size of the tangential beams are derived from the separating plane equation. Dosimetric measures of the treatment plans determined by the automated method are compared with those obtained by applying manual beam placement by the physicians. The method can be further extended to use multileaf collimator (MLC) blocking by optimizing posterior MLC positions. Results: The plans for 36 patients (23 prone- and 13 supine-treated) with left breast cancer were analyzed. Our algorithm reduced the volume of the heart that receives >500 cGy dose (V5) from 2.7 to 1.7 cm{sup 3} (p = 0.058) on average and the volume of the ipsilateral lung that receives >1000 cGy dose (V10) from 55.2 to 40.7 cm{sup 3} (p = 0.0013). The dose coverage as measured by volume receiving >95% of the prescription dose (V95%) of the WB without a 5 mm superficial layer decreases by only 0.74% (p = 0.0002) and the V95% for the tumor bed with 1.5 cm margin remains unchanged. Conclusions: This study has demonstrated the feasibility of using a SVM-based algorithm to determine optimal beam placement without a physician's intervention. The proposed method reduced the dose to OARs, especially for supine treated patients, without any relevant degradation of dose homogeneity and coverage in general.

Zhao Xuan; Kong, Dewen; Jozsef, Gabor; Chang, Jenghwa; Wong, Edward K.; Formenti, Silvia C.; Wang Yao [Department of Electrical and Computer Engineering, Polytechnic Institute of New York University, Brooklyn, New York 11201 (United States); Department of Radiation Oncology, School of Medicine, Langone Medical Center, New York University, New York, New York 10016 (United States); Department of Computer Science and Engineering, Polytechnic Institute of New York University, Brooklyn, New York 11201 (United States); Department of Radiation Oncology, School of Medicine, Langone Medical Center, New York University, New York, New York 10016 (United States); Department of Electrical and Computer Engineering, Polytechnic Institute of New York University, Brooklyn, New York 11201 (United States)

2012-05-15T23:59:59.000Z

18

Design and development of an automated pinning machine for the surface mount electronics industry  

E-Print Network (OSTI)

This thesis describes the development of a concept for a pinning process and the associated machinery to handle odd-form pins specific to a company in the surface mount electronics industry. The developed pinning machine ...

Cook, Daniel J., M. Eng. (Daniel James). Massachusetts Institute of Technology

2012-01-01T23:59:59.000Z

19

Type of automation failure: the effects on trust and reliance in automation.  

E-Print Network (OSTI)

??Past automation research has focused primarily on machine-related factors (e.g., automation reliability) and human-related factors (e.g., accountability). Other machine-related factors such as type of automation… (more)

Johnson, Jason D.

2004-01-01T23:59:59.000Z

20

Native Village of Teller Addresses Heating Fuel Shortage, Improves Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Native Village of Teller Addresses Heating Fuel Shortage, Improves Native Village of Teller Addresses Heating Fuel Shortage, Improves Energy Security Native Village of Teller Addresses Heating Fuel Shortage, Improves Energy Security June 22, 2012 - 4:54pm Addthis The combination of the Native Village of Teller’s limited fuel storage capacity and a harsh winter led to a supply shortage. Photo by Alexander Dane, NREL The combination of the Native Village of Teller's limited fuel storage capacity and a harsh winter led to a supply shortage. Photo by Alexander Dane, NREL Native Village of Teller Addresses Heating Fuel Shortage, Improves Energy Security Native Village of Teller fuel storage. Photo by Alexander Dane, NREL Native Village of Teller fuel storage. Photo by Alexander Dane, NREL The combination of the Native Village of Teller's limited fuel storage capacity and a harsh winter led to a supply shortage. Photo by Alexander Dane, NREL

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Native Village of Teller Addresses Heating Fuel Shortage, Improves Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Native Village of Teller Addresses Heating Fuel Shortage, Improves Native Village of Teller Addresses Heating Fuel Shortage, Improves Energy Security Native Village of Teller Addresses Heating Fuel Shortage, Improves Energy Security June 22, 2012 - 4:54pm Addthis The combination of the Native Village of Teller’s limited fuel storage capacity and a harsh winter led to a supply shortage. Photo by Alexander Dane, NREL The combination of the Native Village of Teller's limited fuel storage capacity and a harsh winter led to a supply shortage. Photo by Alexander Dane, NREL Native Village of Teller Addresses Heating Fuel Shortage, Improves Energy Security Native Village of Teller fuel storage. Photo by Alexander Dane, NREL Native Village of Teller fuel storage. Photo by Alexander Dane, NREL The combination of the Native Village of Teller's limited fuel storage capacity and a harsh winter led to a supply shortage. Photo by Alexander Dane, NREL

22

Inference in Graphical Models In an increasingly connected and automated world, machines that are capable of learning and  

E-Print Network (OSTI)

these boundaries. Where, historically, the industrial revolution was about augmenting or replacing human labour with machine labour, we are on the verge of an inference revolution where machine reasoning augments or replaces human reasoning. Whilst the information revolution has been about communication, processing

Winn, John

23

Automation improves personal effectiveness while reducing drudgery  

Science Journals Connector (OSTI)

Automation improves personal effectiveness while reducing drudgery ... "The term automation ," says one Department of Labor official with undisguised feeling, "is a hopeless semantic jungle." ... One industry man defines automation very loosely as any way of doing things better with machines. ...

1966-03-14T23:59:59.000Z

24

Native Village of Teller Addresses Heating Fuel Shortage, Improves...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

amounts of heating oil back to Teller. Brevig Mission, which was also running low on fuel, had plans to increase the price per gallon, thus raising the cost for Teller...

25

Jahn-Teller Effect: Its History and Applicability  

DOE R&D Accomplishments (OSTI)

The interactions between Teller, Renner, Jahn and Landau which led to the formulation of the Jahn-Teller effect are discussed. The applicability of Jahn-Teller type of theory to superconductivity and the explanation proposed by the use of Goldstone particles are assessed.

Teller, E.

1981-08-31T23:59:59.000Z

26

Gamow-Teller strength of Mg-26  

E-Print Network (OSTI)

We have measured cross sections for (d,He-2)-induced reactions on Mg-26 at an energy of E(d)=125.2 MeV. The measured Gamow-Teller strength is significantly smaller than that inferred from (p,n) reactions. We demonstrate that beta(+) Gamow...

Xu, HM; Gagliardi, Carl A.; Ajupova, G. K.; Kokenge, B.; Lui, YW.

1996-01-01T23:59:59.000Z

27

Test Automation Test Automation  

E-Print Network (OSTI)

Test Automation Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2013 Mousavi: Test Automation #12;Test Automation Outline Test Automation Mousavi: Test Automation #12;Test Automation Why? Challenges of Manual Testing Test-case design: Choosing inputs

Mousavi, Mohammad

28

Chaos in Jahn-Teller Rattling  

E-Print Network (OSTI)

We unveil chaotic behavior hidden in the energy spectrum of a Jahn-Teller ion vibrating in a cubic anharmonic potential as a typical model for rattling in cage-structure materials. When we evaluate the nearest-neighbor level-spacing distribution $P(s)$ of eigenenergies of the present oscillator system, we observe the transition of $P(s)$ from the Poisson to the Wigner distribution with the increase of cubic anharmonicity, showing the occurrence of chaos in the anharmonic Jahn-Teller vibration. The energy scale of the chaotic region is specified from the analysis of $P(s)$ and we discuss a possible way to observe chaotic behavior in the experiment of specific heat. It is an intriguing possibility that chaos in nonlinear physics could be detected by a standard experiment in condensed matter physics.

Takashi Hotta; Akira Shudo

2014-06-18T23:59:59.000Z

29

Born-Oppenheimer Corrections Near a Renner-Teller Crossing.  

E-Print Network (OSTI)

??We perform a rigorous mathematical analysis of the bending modes of a linear triatomic molecule that exhibits the Renner-Teller effect. Assuming the potentials are smooth,… (more)

Herman, Mark Steven

2008-01-01T23:59:59.000Z

30

Abraham Presents Secretary's Gold Award to Edward Teller  

Office of Scientific and Technical Information (OSTI)

26, 2002 26, 2002 Abraham Presents Secretary's Gold Award to Edward Teller LIVERMORE, CALIF. - Secretary of Energy Spencer Abraham today presented Dr. Edward Teller, Director Emeritus of the Lawrence Livermore National Laboratory, with the Secretary's Gold Award in recognition of his outstanding contributions to science and the security of the nation. The award is the Energy Department's highest honorary award and includes a plaque with citation, a medallion and a rosette. Secretary Abraham presented Dr. Teller with the award during his visit to the laboratory. "Dr. Teller is one of the giant figures of the 20th century, whose contributions to winning both World War II and the Cold War are immeasurable," Abraham told lab employees. "But I believe that Edward

31

An intelligent CNC machine control system architecture  

SciTech Connect

Intelligent, agile manufacturing relies on automated programming of digitally controlled processes. Currently, processes such as Computer Numerically Controlled (CNC) machining are difficult to automate because of highly restrictive controllers and poor software environments. It is also difficult to utilize sensors and process models for adaptive control, or to integrate machining processes with other tasks within a factory floor setting. As part of a Laboratory Directed Research and Development (LDRD) program, a CNC machine control system architecture based on object-oriented design and graphical programming has been developed to address some of these problems and to demonstrate automated agile machining applications using platform-independent software.

Miller, D.J.; Loucks, C.S.

1996-10-01T23:59:59.000Z

32

On the development of a universal automated fixturing system through encapsulation techniques  

E-Print Network (OSTI)

Universal automated fixturing can transform a machine tool into a rapid prototyping machine with many advantages over current rapid prototyping methods. Using this modified machine tool, prototype parts can be manufactured ...

Lee, Elmer C., 1973-

2001-01-01T23:59:59.000Z

33

Robots learning to manipulate: real-time application-oriented algorithms using feature-based and machine learning techniques  

E-Print Network (OSTI)

Machine Learning in Robotics . . . . . . . . . . . . . . .Models from the Robotics Community . . . . . . . .International Conference on Robotics and Automation, p. xvii

Balaguer, Benjamin Daniel

2012-01-01T23:59:59.000Z

34

Teller County, Colorado: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Teller County, Colorado: Energy Resources Teller County, Colorado: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 38.8611579°, -105.1726816° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.8611579,"lon":-105.1726816,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

35

Graphic update of automated logic diagrams  

Science Journals Connector (OSTI)

The Automated Logic Diagram, or ALD, is a well defined document prepared by engineers to specify the design of a machine. 1 The document is coded for computer input by highly trained transcription personnel. Changes or corrections ...

Richard J. Uhlik

1968-07-01T23:59:59.000Z

36

E-Print Network 3.0 - atomic power teller Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Los Alamos, Teller's demands for the immediate production of a vastly more powerful thermonuclear... of the atomic scientists rushed to return to the universities, ... Source:...

37

Automation Status  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL Manufacturing R&D Workshop NREL Manufacturing R&D Workshop NREL H2/FC Manufacturing R&D Workshop Automation Status Garry Sperrick garry@sperkllc.com 585-259-0311 August 11, 2011 Automation Status NREL Manufacturing R&D Workshop Presentation Overview ƒ Brief Introduction ƒ DOE / NREL - Review & Discussion ƒ Automation Platforms ƒ Automation Processes ƒ Automation Considerations of the Manufacturer ƒ Manufacturer and the Supplier ƒ Three (3) Automation Programs Following these Guidelines ƒ Automotive Component Manufacturing ƒ Medical Manufacturing ƒ Membrane Electrode Assembly Manufacturing ƒ Hypothetical Fuel Cell Manufacturing Platforms August 11, 2011 Automation Status NREL Manufacturing R&D Workshop Professional Bio ƒ Automation Technician - Mobil Chemical

38

Home Automation  

E-Print Network (OSTI)

In this paper I briefly discuss the importance of home automation system. Going in to the details I briefly present a real time designed and implemented software and hardware oriented house automation research project, capable of automating house's electricity and providing a security system to detect the presence of unexpected behavior.

Ahmed, Zeeshan

2010-01-01T23:59:59.000Z

39

Test Automation Ant JUnit Test Automation  

E-Print Network (OSTI)

Test Automation Ant JUnit Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2012 Mousavi: Test Automation #12;Test Automation Ant JUnit Outline Test Automation Ant JUnit Mousavi: Test Automation #12;Test Automation Ant JUnit Why? Challenges of Manual Testing

Mousavi, Mohammad

40

Benchmarking nuclear models for Gamow-Teller response  

E-Print Network (OSTI)

A comparative study of the nuclear Gamow-Teller response (GTR) within conceptually different state-of-the-art approaches is presented. Three nuclear microscopic models are considered: (i) the recently developed charge-exchange relativistic time blocking approximation (RTBA) based on the covariant density functional theory, (ii) the shell model (SM) with an extended "jj77" model space and (iii) the non-relativistic quasiparticle random-phase approximation (QRPA) with a Brueckner G-matrix effective interaction. We study the physics cases where two or all three of these models can be applied. The Gamow-Teller response functions are calculated for 208-Pb, 132-Sn and 78-Ni within both RTBA and QRPA. The strengths obtained for 208-Pb are compared to data that enables a firm model benchmarking. For the nucleus 132-Sn, also SM calculations are performed within the model space truncated at the level of a particle-hole (ph) coupled to vibration configurations. This allows a consistent comparison to the RTBA where ph+phonon coupling is responsible for the spreading width and considerable quenching of the GTR. Differences between the models and perspectives of their future developments are discussed.

E. Litvinova; B. A. Brown; D. -L. Fang; T. Marketin; R. G. T. Zegers

2014-02-04T23:59:59.000Z

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Benchmarking nuclear models for Gamow-Teller response  

E-Print Network (OSTI)

A comparative study of the nuclear Gamow-Teller response (GTR) within conceptually different state-of-the-art approaches is presented. Three nuclear microscopic models are considered: (i) the recently developed charge-exchange relativistic time blocking approximation (RTBA) based on the covariant density functional theory, (ii) the shell model (SM) with an extended "jj77" model space and (iii) the non-relativistic quasiparticle random-phase approximation (QRPA) with a Brueckner G-matrix effective interaction. We study the physics cases where two or all three of these models can be applied. The Gamow-Teller response functions are calculated for 208-Pb, 132-Sn and 78-Ni within both RTBA and QRPA. The strengths obtained for 208-Pb are compared to data that enables a firm model benchmarking. For the nucleus 132-Sn, also SM calculations are performed within the model space truncated at the level of a particle-hole (ph) coupled to vibration configurations. This allows a consistent comparison to the RTBA where ph+ph...

Litvinova, E; Fang, D -L; Marketin, T; Zegers, R G T

2014-01-01T23:59:59.000Z

42

Machines that understand music  

E-Print Network (OSTI)

Powered Machine Learning . . . . . . . . . . . . . . . .Powered Machine Learning . . . . . . . . . . . . . . . . .passive). Integrating active machine learning with Herd It’s

Barrington, Luke

2012-01-01T23:59:59.000Z

43

MACHINE CONTEST MACHINE VOLUME WORKSHEET  

E-Print Network (OSTI)

MACHINE CONTEST® MACHINE VOLUME WORKSHEET Note: Each square is 1' x 1' (0.3 m x 0.3 m) (Official the footprint of your machine NOTE: If any part of the machine falls within a square, you must count the entire: _______________ (choose one: ft2 or m2 ) STEP 3: Measure the height of your machine. NOTE: The maximum height is 8' (2.4 m

Yener, Aylin

44

Automation i Distributionsnät; Distribution automation.  

E-Print Network (OSTI)

?? As a part of Göteborg Energi’s work towards a smarter electric grid, the company has chosen to investigate the possibilities of automation in their… (more)

Mård, Mathias

2012-01-01T23:59:59.000Z

45

E-Print Network 3.0 - automated hmc assembly Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

MACHINE TOOLS a p r i l 2 0 0 5 Summary: flexible automation. Today, a wide variety of CNC machines are used for metal cutting, sheet metal working... that different levels of...

46

Chapter 11 - Industrial Automation  

Science Journals Connector (OSTI)

The industrial systems of the future are complex systems composed of vast numbers of devices interacting with each other and with enterprise systems. Modern technologies such as web services, service-oriented architectures (SOAs), the cloud, etc. make it possible for sophisticated infrastructures to emerge in future factories. We take a closer look at key visionary aspects that are expected to be introduced in the industrial automation domain in the years to come, and the pivotal role of M2M and IoT. Additionally, we investigate the impact on the collaboration of machines among themselves and with enterprise systems and their services.

Jan Höller; Vlasios Tsiatsis; Catherine Mulligan; Stamatis Karnouskos; Stefan Avesand; David Boyle

2014-01-01T23:59:59.000Z

47

Quantum Machines  

E-Print Network (OSTI)

We discuss quantum information processing machines. We start with single purpose machines that either redistribute quantum information or identify quantum states. We then move on to machines that can perform a number of functions, with the function they perform being determined by a program, which is itself a quantum state. Examples of both deterministic and probabilistic programmable machines are given, and we conclude with a discussion of the utility of quantum programs.

Mark Hillery; Vladimir Buzek

2009-03-24T23:59:59.000Z

48

Automation: The Machines and the Applications  

Science Journals Connector (OSTI)

As implied in Chap. 6, the general-purpose digital computer made a hesitant entry into the field of process engineering in Britain. In a retrospective note [1], John Bunt implies that Dr. Lawrence Ross was pro...

Emeritus Professor Simon Lavington

2011-01-01T23:59:59.000Z

49

Automating Datacenter Operations Using Machine Learning  

E-Print Network (OSTI)

CA, USA, 2004. USENIX Association. [Barroso and H¨olzle,2009] Luiz Andr´e Barroso and Urs H¨olzle. The Datacenter as

Bodik, Peter

2010-01-01T23:59:59.000Z

50

A Born–Oppenheimer Expansion in a Neighborhood of a Renner–Teller Intersection  

Science Journals Connector (OSTI)

We perform a rigorous mathematical analysis of the bending modes of a linear triatomic molecule that exhibits the Renner–Teller effect. Assuming the potentials are smooth, we prove that the wave functions and ...

Mark S. Herman

2010-06-01T23:59:59.000Z

51

Highway Electrification And Automation  

E-Print Network (OSTI)

Electrification and Automation Technologies - RegionalHighway Electrification and Automation Steven E. Shladovertechnology of highway automation,” as well as its belief

Shladover, Steven E.

1992-01-01T23:59:59.000Z

52

Software support for building end-user programming environments in the automation domain  

Science Journals Connector (OSTI)

Projects in the automation domain often require that end users, who are the machine operators, have means to change control software to make adaptations and optimizations for the machining task at hand. Although they usually do not have any software ... Keywords: domain-specific language, end-user programming, industrial automation, visual language, visual programming

Herbert Prähofer; Dominik Hurnaus; Roland Schatz; Christian Wirth; Hanspeter Mössenbö k

2008-05-01T23:59:59.000Z

53

: Helmholtz machine estimation .  

E-Print Network (OSTI)

: Helmholtz machine density estimation . . : . . . (supervised learning) , (active learning) (query learning) [1, 3]. . (unsupervised learning), . , [5]. . Helmholtz machine , . Helmholtz machine : Helmholtz machine [2] . Helmholtz machine (generative network) (recognition network) . , , . Helmholtz machine (self

54

Electric machine  

DOE Patents (OSTI)

An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Reddy, Patel Bhageerath (Madison, WI)

2012-07-17T23:59:59.000Z

55

The relativistic Feynman-Metropolis-Teller treatment at finite temperatures  

E-Print Network (OSTI)

The Feynman-Metropolis-Teller treatment of compressed atoms has been recently generalized to relativistic regimes and applied to the description of static and rotating white dwarfs in general relativity. We present here the extension of this treatment to the case of finite temperatures and construct the corresponding equation of state (EOS) of the system; applicable in a wide regime of densities that includes both white dwarfs and neutron star outer crusts. We construct the mass-radius relation of white dwarfs at finite temperatures obeying this new EOS and apply it to the analysis of ultra low-mass white dwarfs with $M\\lesssim 0.2 M_\\odot$. In particular, we analyze the case of the white dwarf companion of PSR J1738+0333. The formulation is then extrapolated to compressed nuclear matter cores of stellar dimensions, systems with mass numbers $A\\approx (m_{\\rm Planck}/m_n)^3$ or mass $M_{\\rm core}\\approx M_{\\odot}$, where $m_{\\rm Planck}$ and $m_n$ are the Planck and the nucleon mass. For $T \\ll m_e c^2/k_B \\approx 5.9\\times 10^9$ K, a family of equilibrium configurations can be obtained with analytic solutions of the ultra-relativistic Thomas-Fermi equation at finite temperatures. Such configurations fulfill global but not local charge neutrality and have strong electric fields on the core surface. We find that the maximum electric field at the core surface is enhanced at finite temperatures with respect to the degenerate case.

S. M. de Carvalho; M. Rotondo; Jorge A. Rueda; R. Ruffini

2013-12-09T23:59:59.000Z

56

Judging Edward Teller: A Closer Look at One of the Most Influential Scientists of the Twentieth Century  

SciTech Connect

Much has been written about Edward TEller, but little of it is objective. Given, on the one hand, his position as one of the most inventive theoretical physicists of the 20th century, and on the other, his central role in the development and advocacy of thermonuclear weapons, one might imagine it impossible at this point in history to write a scholarly, impartial account of Teller's life and his impact. Now, however, Istvan Hargittai, a prominent Hungarian physical chemist and historian of science, has written a balanced, thoughtful, and beautifully research biography that comes closest. Hargittai is uniquely qualified for this difficult task. Coming a generation and a half later from a similar Hungarian-Jewish background, Hargittai understands well the influences and terrible events that shaped Teller. The advent of virulent, political anti-Semitism, first in Hungary and then in Germany, made Teller twice a refugee. Both Teller and Hargittai lost close family in the Holocaust; Hargittai was himself liberated from a Nazi concentration camp as a child. While Teller was in the US by then, his and Hargittai's surviving family members in Hungary suffered mistreatment at the hands of the postwar Hungarian Communist dictatorship. Hargittai's informed Eastern European perspective also provides a fresh viewpoint to the cold war context of the second half of Teller's career. Furthermore, Hargittai's own scientific work in molecular structure clearly makes him appreciate of Teller's breakthroughs in that field in the 1930s.

Libby, S B

2010-12-29T23:59:59.000Z

57

On the interplay between allowed Gamow-Teller and Isovector Spin Monopole (IVSM) excitations  

SciTech Connect

The excitation of Gamow-Teller (GT) and Isovector Spin Monopole (IVSM) modes in {sup 116}In by (p,n) and (n,p)) charge-exchange reactions is studied within the framework of the Quasiparticle Random-phase Approximation. It is shown that the admixture of the IVSM and Gamow-Teller (GT) excitations is negligible, and that the contribution to the strength above 20 MeV excitation energy, in {sup 116}In, is, most likely, due to the IVSM ({sigma}r{sup 2}{tau}{sup {+-}}) mode.

Bes, D. R. [Dept of Physics. Lab.Tandar, CAC-CNEA. Avda Gral Paz 1499, 1650 Gral San Martin (Argentina); Civitarese, O. [Dept of Physics, University of La Plata, c.c.67 1900, La Plata (Argentina); Suhonen, J. [Dept of Physics, University of Jyvaeskylae, P.O. Box 35, FI-40014, Jyvaeskylae (Finland)

2011-12-16T23:59:59.000Z

58

Science and Technology Review, July-August 1998: Celebrating Edward Teller at 90  

DOE R&D Accomplishments (OSTI)

On the occasion of Edward Teller's 90th birthday, Science and Technology Review (S&TR) has the pleasure of honoring Lawrence Livermore's co-founder and most influential scientist. Teller is known for his inventive work in physics, his concepts leading to thermonuclear explosions, and his strong stands on such issues as science education, the nation's strategic defense, the needs for science in the future, and sharing scientific information. The articles in this issue also show him, as always, tirelessly moving forward with his new and changing interests.

Smart, J.

1998-07-00T23:59:59.000Z

59

The Fermi And Gamov-Teller {beta}-Decay Excitations Of The Scissors Mode 1+ States  

SciTech Connect

In this study, the allowed Gamov-Teller (GT) and Fermi {beta} transitions from 1+-state of the odd-odd nuclei to 1+-states are considered. Calculation of the {beta} transition matrix elements is performed in the phonon description and an analytical expressions for MF and MGT matrix elements are obtained for the first time.

Yildirm, Z.; Ertugral, F.; Kuliev, A. A. [Sakarya University, Physics Department, Adapazari (Turkey); Guliyev, E. [Institute of Physics, National Academy of Sciences, Baku (Azerbaijan)

2007-04-23T23:59:59.000Z

60

Simulating Turing Machines on Maurer Machines  

E-Print Network (OSTI)

Simulating Turing Machines on Maurer Machines J.A. Bergstra1,2 and C.A. Middelburg3 1 Programming MB Eindhoven, the Netherlands keesm@win.tue.nl Abstract. Maurer machines are much closer to real computers than Turing machines. Computer instructions play a prominent part in Mau- rer machines. We show

van der Zwaag, Mark

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Automation Performance Index.  

E-Print Network (OSTI)

??Automation is intended to improve overall building performance. Building Automation Systems (BAS) are attractive and popular due to their promise of increased operational effectiveness. BAS… (more)

Makarechi, Shariar

2006-01-01T23:59:59.000Z

62

Views on Automation  

Science Journals Connector (OSTI)

Views on Automation ... Industrial managements, he feels, must allay workers' fears by showing how they can take pride in the greater accomplishment of automated plants. ...

1957-07-29T23:59:59.000Z

63

Precision Timed Machines  

E-Print Network (OSTI)

1.4 Precision Timed Machines . . . . .Precision Timed Machine 2.1precision timed (PRET) machine. pages 264–265, June 2007. [

Liu, Isaac Suyu

2012-01-01T23:59:59.000Z

64

A Generalized Deletion Machine  

E-Print Network (OSTI)

In this work we prescribe a more generalized quantum-deleting machine (input state dependent). The fidelity of deletion is dependent on some machine parameters such that on alteration of machine parameters we get back to standard deleting machines. We also carried out a various comparative study of various kinds of quantum deleting machines. We also plotted graphs, making a comparative study of fidelity of deletion of the deletion machines, obtained as particular cases on changing the machine parameters of our machine.

Indranil Chakrabarty; Satyabrata Adhikari

2005-11-22T23:59:59.000Z

65

State-Machine Replication  

E-Print Network (OSTI)

State-Machine Replication #12;The Problem Clients Server #12;The Problem Clients Server #12;The (state machine) #12;The Solution 1. Make server deterministic (state machine) State machine #12;The Solution 1. Make server deterministic (state machine) 2. Replicate server State machines #12;The Solution 1

Venkataramani, Arun

66

Induction machine  

DOE Patents (OSTI)

A polyphase rotary induction machine for use as a motor or generator utilizing a single rotor assembly having two series connected sets of rotor windings, a first stator winding disposed around the first rotor winding and means for controlling the current induced in one set of the rotor windings compared to the current induced in the other set of the rotor windings. The rotor windings may be wound rotor windings or squirrel cage windings.

Owen, Whitney H. (Ogden, UT)

1980-01-01T23:59:59.000Z

67

One IBM Plant's Approach to Automated Control System Standards  

E-Print Network (OSTI)

ONE IBM PLANT'S APPROACH"TO AUTOMATED CONTROL SYSTEM STANDARDS John P. Cilia International Business Machines Corporation Poughkeepsie, New York ABSTRACT INSTRUMENTATION STANDARDS The trend toward lower cost of new technologies in building... Facilities Automation Control System (IPDFACS) standards used in the bidding process, the philosophy behind them, the type of instrumentation specified to be installed, and how to maintain this complex DDDC system. INTRODUCTION The lower cost of chips...

Cilia, J. P.

68

Development of control system to automate the PCB pin insertion process  

E-Print Network (OSTI)

This thesis describes the development of the control system that runs the automated pin insertion machine in a surface mount technology assembly line. The control system is divided into 2 subsystems viz. pin sorting and ...

Isaac, Rejin

2012-01-01T23:59:59.000Z

69

Development of Mechanical Systems for Automated Medical Slide Specimen Storage and Retrieval  

E-Print Network (OSTI)

and intriguing considering that improving medical systems can save the lives of patients. The Intelligent System and Automation Laboratory at the University of Kansas has created a prototype machine with the goal of making the process of medical slide specimen...

Wurtz, Joshua James

2014-05-31T23:59:59.000Z

70

Novel Flux Coupling Machine without Permanent Magnets - U Machine...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Novel Flux Coupling Machine without Permanent Magnets - U Machine Novel Flux Coupling Machine without Permanent Magnets - U Machine 2009 DOE Hydrogen Program and Vehicle...

71

Home Automation System; Automation i hemmet.  

E-Print Network (OSTI)

?? This project revolves around creating a home automation system prototype with the main focus being the ability to lock/unlock a door through the internet.… (more)

Ruwaida,, Bassam

2013-01-01T23:59:59.000Z

72

The impact on rack configuration on the speed profile of the storage and retrieval machine  

Science Journals Connector (OSTI)

The travel-time models of automated storage/retrieval machines, proposed by Chang, Wen and Lin (IIE Transactions, 27 (1), 108--111(1995)), which consider the speed profiles in real world applications, have been e...

Ding-Tsair Chang; Ue-Pyng Wen

1997-01-01T23:59:59.000Z

73

Course info Machine Learning  

E-Print Network (OSTI)

Course info Machine Learning Real life problems Lecture 1: Machine Learning Problem Qinfeng (Javen) Shi 28 July 2014 Intro. to Stats. Machine Learning COMP SCI 4401/7401 Qinfeng (Javen) Shi Lecture 1: Machine Learning Problem #12;Course info Machine Learning Real life problems Table of Contents I 1 Course

Shi, Qinfeng "Javen"

74

Principal component analysis based on wavelet characteristics applied to automated surface defect inspection  

Science Journals Connector (OSTI)

Automated visual inspection, a crucial manufacturing step, has been replacing the more time-consuming and less accurate human inspection. This research explores automated visual inspection of surface defects in a light-emitting diode (LED) chip. Commonly ... Keywords: hotelling statistic, machine vision system, principal component analysis, surface defect inspection, wavelet characteristics

Hong-Dar Lin; Chung-Yu Chung; Wan-Ting Lin

2008-04-01T23:59:59.000Z

75

Automation of organic elemental analysis  

Science Journals Connector (OSTI)

Automation of organic elemental analysis ... Describes the development and design of an apparatus for automated organic elemental analysis. ...

Velmer B. Fish

1969-01-01T23:59:59.000Z

76

Automation in biological crystallization  

Science Journals Connector (OSTI)

Automation is the response to overcoming the crystallization bottleneck in biological crystallography. This review provides a summary of the current methods and technologies applied in automated platforms for the setup of initial and follow-up crystallization experiments.

Shaw Stewart, P.

2014-05-28T23:59:59.000Z

77

Digital Control for Automation  

Science Journals Connector (OSTI)

GREATER YIELDS OF BETTER QUALITY PRODUCTS at reduced costs: That's one way to look at automations goal. And among instruments for automation are data reduction systems (others: continuous process analyzers, computer elements, and control mechanisms). ...

1956-04-02T23:59:59.000Z

78

AUTOMATION: Hints from OCAW  

Science Journals Connector (OSTI)

AUTOMATION: Hints from OCAW ... Labor and management need more, not less, collective bargaining in automated industries, he told a Houston, Tex., meeting of the Petro Group of the South Texas Section of the American Institute of Chemical Engineers. ...

1969-06-30T23:59:59.000Z

79

Theorie des langages Automates finis  

E-Print Network (OSTI)

Th´eorie des langages Automates finis Elise Bonzon http://web.mi.parisdescartes.fr/ bonzon/ elise.bonzon@parisdescartes.fr 1 / 51 Th´eorie des langages #12;Automates finis Automates finis Introduction Formalisation Repr´erations sur les automates Automates finis et langages 2 / 51 Th´eorie des langages #12;Automates finis

Bonzon, Elise

80

Multiplex automated genome engineering  

DOE Patents (OSTI)

The present invention relates to automated methods of introducing multiple nucleic acid sequences into one or more target cells.

Church, George M; Wang, Harris H; Isaacs, Farren J

2013-10-29T23:59:59.000Z

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Planet of the Machines  

E-Print Network (OSTI)

2011). Rage against the machine: How the digital revolutionMore jobs predicted for machines, not people. The New Yorke - m o re - j o b s - fo r- machines-not-people.html? _r=1

Landers, Tara

2012-01-01T23:59:59.000Z

82

Congress Likes Automation  

Science Journals Connector (OSTI)

Congress Likes Automation ... Industry is generally aware of its responsibilities to worker replaced by automation, Congressional group concludes after broad study ... No NEW LEGISLATION or legislative changes are required to keep pace with the impact of automation on the national economy, concludes Rep. Wright Patman (D.-Tex.). ...

1955-11-07T23:59:59.000Z

83

PROJECT SUMMARY REPORT 1515-S IMPLEMENTATION OF AN AUTOMATED  

E-Print Network (OSTI)

. Haas, Kamel Saidi, Yong-Kwon Cho, Walter Fagerlund, Hyoungkwan Kim, and Young-Suk Kim CENTER. Report Date August 1999 6. Performing Organization Code7. Author(s) Dr. Carl T. Haas, Kamel Saidi, Yong OF AN AUTOMATED ROAD MAINTENANCE MACHINE (ARMM) by Dr. Carl T. Haas, Kamel Saidi, Yong-Kwon Cho, Walter Fagerlund

Texas at Austin, University of

84

Joint Genome Institute's Automation Approach and History  

E-Print Network (OSTI)

Joint Genome Institute’s Automation Approach and Historythroughput environment; – automation does not necessarilyissues “Islands of Automation” – modular instruments with

Roberts, Simon

2006-01-01T23:59:59.000Z

85

Analysis of vibrational structure and Jahn?Teller effects in the electron spectrum of ammonia  

Science Journals Connector (OSTI)

The electron spectra of the 2 A 1 ? 1 A 1 and the 2 E? 1 A 1 transitions of ammonia have been measured with sufficient resolution to observe considerable fine structure. The first transition 2 A 1 ? 1 A 1 contains two vibrational progressions which are assigned to the ?2 bending mode. The second transition 2 E? 1 A 1 consists of two overlapping electron bands due to Jahn?Teller splitting of the 2 E state. The vibronic structure accompanying this transition has been partially resolved and compared to the results of model calculations.

J. W. Rabalais; L. Karlsson; L. O. Werme; T. Bergmark; K. Siegbahn

1973-01-01T23:59:59.000Z

86

Simulation of Jahn-Teller-Dicke Magnetic Structural Phase Transition with Trapped Ions  

E-Print Network (OSTI)

We study theoretically the collective E$\\otimes$e Jahn-Teller-Dicke distortion in a system of trapped ions. We focus in the limit of infinite range interactions in which an ensemble of effective spins interacts with two collective vibrational modes with U(1) symmetric couplings. Our model is exactly solvable in the thermodynamical limit and it is amenable to be solved by exact numerical diagonalization for a moderate number of ions. We show that trapped ions are ideally suited to study the emergence of spontaneous symmetry breaking of a continuous symmetry and magnetic structural phase transition in a mesoscopic system.

Peter A. Ivanov; Diego Porras; Svetoslav S. Ivanov; Ferdinand Schmidt-Kaler

2012-07-02T23:59:59.000Z

87

Automated Stellar Spectral Classification and Parameterization for the Masses  

E-Print Network (OSTI)

Stellar spectroscopic classification has been successfully automated by a number of groups. Automated classification and parameterization work best when applied to a homogeneous data set, and thus these techniques primarily have been developed for and applied to large surveys. While most ongoing large spectroscopic surveys target extragalactic objects, many stellar spectra have been and will be obtained. We briefly summarize past work on automated classification and parameterization, with emphasis on the work done in our group. Accurate automated classification in the spectral type domain and parameterization in the temperature domain have been relatively easy. Automated parameterization in the metallicity domain, formally outside the MK system, has also been effective. Due to the subtle effects on the spectrum, automated classification in the luminosity domain has been somewhat more difficult, but still successful. In order to extend the use of automated techniques beyond a few surveys, we present our current efforts at building a web-based automated stellar spectroscopic classification and parameterization machine. Our proposed machinery would provide users with MK classifications as well as the astrophysical parameters of effective temperature, surface gravity, mean abundance, abundance anomalies, and microturbulence.

Ted von Hippel; Carlos Allende Prieto; Chris Sneden

2002-08-08T23:59:59.000Z

88

Process Development Automation:? An Evolutionary Approach  

Science Journals Connector (OSTI)

Process Development Automation:? An Evolutionary Approach ... In contrast, standard laboratory equipment already contains some automated capabilities but is normally unused in our automation strategies. ... What Can Be Automated? ...

Mike Pollard

2001-04-27T23:59:59.000Z

89

Machines registres Yves Lafont  

E-Print Network (OSTI)

Machines à registres Yves Lafont Université d'Aix-Marseille Institut de Mathématiques de Luminy) Pascal Turing Von Neumann #12;Quelle opération calcule cette machine ? Exemple 1 2 registres : (+ 1 Quelle opération calcule cette machine ? #12;Quelle propriété teste cette machine ? Exemple 3 1 seul

Lafont, Yves

90

Automation of hydroelectric power plants  

SciTech Connect

This paper describes how the author's company has been automating its hydroelectric generating plants. The early automations were achieved with a relay-type supervisory control system, relay logic, dc tachometer, and a pneumatic gate-position controller. While this system allowed the units to be started and stopped from a remote location, they were operated at an output that was preset by the pneumatic control at the generating site. The supervisory control system at the site provided such information as unit status, generator breaker status, and a binary coded decimal (BCD) value of the pond level. The generating units are started by energizing an on-site relay that sets the pneumatic gate controller to a preset value above the synchronous speed of the hydroelectric generator. The pneumatic controller then opens the water-wheel wicket gates to the preset startup position. As the hydroelectric generator starts to turn, the machine-mounted dc tachometer produces a voltage. At a dc voltage equivalent to synchronous speed, the generator main breaker closes, and a contact from the main breaker starts a field-delay timer. Within a few seconds, the field breaker closes. Once the cycle is complete, a relay changes the pneumatic setpoint to a preset operating point of about 8/10 wicket gate opening.

Grasser, H.S. (Consolidated Papers, Inc., Wisconsin Rapids, WI (US))

1990-03-01T23:59:59.000Z

91

NEW MACHINE VISION APPLICATIONS IN GERMANY Claus-E. Liedtke  

E-Print Network (OSTI)

systems and the large users of vision components like the car industry and the machine industry support and completeness check. For the fully automated production the early recognition and removal of defective parts is indispensible on all production levels. For the detection of faulty materials, defective assemblies

92

An Automation System for Optimizing a Supply Chain Network Design under the Influence of Demand Uncertainty  

E-Print Network (OSTI)

Automation . . . . . . . . . . . . . . . . . . . . . . iii 3Automation . . . . . . . . . . . . . . . . . . . . . . 5Dashboard/Cockpit Automation . . . . . . . . . . . . .

Polany, Rany

2012-01-01T23:59:59.000Z

93

Configuration splitting of the Gamow-Teller resonance in antimony isotopes: Is this a real or a virtual effect?  

SciTech Connect

The Gamow-Teller strength functions for a number of antimony isotopes were calculated within a semimicroscopic approach based on the continuum version of the charge-exchange quasiparticle random-phase approximation and on phenomenologically taking into account the fragmentation effect. The structural effect of splitting of the main maximum of the Gamow-Teller resonance in these isotopes was confirmed. Experimental data on the excitation of this resonance in a direct and a resonance reaction for the {sup 118}Sn parent nucleus were analyzed with allowance for this effect.

Igashov, S. Yu., E-mail: igashov@theor.mephi.ru [All-Russia Research Institute of Automatics (Russian Federation); Rodin, V. A. [Institut fuer theoretische Physik der Universitaet Tuebingen (Germany)] [Institut fuer theoretische Physik der Universitaet Tuebingen (Germany); Urin, M. H. [National Research Nuclear University MEPhI (Russian Federation)] [National Research Nuclear University MEPhI (Russian Federation)

2013-04-15T23:59:59.000Z

94

Can Machines BeCan Machines Be Polite?Polite?  

E-Print Network (OSTI)

Can Machines BeCan Machines Be Polite?Polite? Michael A. CovingtonMichael A. Covington Artificial Intelligence CenterArtificial Intelligence Center #12;Can machines be polite?Can machines be polite? Machines have beenMachines have been annoying peopleannoying people ever since humanever since human--machine

Covington, Michael A.

95

CIMplementation™: Evaluating Manufacturing Automation  

E-Print Network (OSTI)

in the manufacturing organization if CIMplementation~* is to succeed. 1.0 INTRODUCTION There is much discussion today about Com puter Integrated Manufacturing (CIM). Automation tools like Computer Aided Design (CAD) systems, robots, automated material handling...~ Pressing the frontier of technology in one's own manufactur ing facility will not be without its pitfalls. Second, while automation engineers may be able to piece together the technological pieces of a CIM system, they cannot and do not evaluate...

Krakauer, J.

96

IPv6 Home Automation.  

E-Print Network (OSTI)

?? Home automation is the systematic controlling and monitoring of everyday home devices such as lighting, heating, window blinds and appliances (both white goods and… (more)

Hådén, Thor

2009-01-01T23:59:59.000Z

97

Home Automation Using Elvin.  

E-Print Network (OSTI)

?? Home automation systems of today tend to be external solutions to an existing product that enable rather complex and expensive communications equipment to be… (more)

Malm, Anders

2005-01-01T23:59:59.000Z

98

Vehicle highway automation.  

E-Print Network (OSTI)

??Vehicle Highway Automation has been studied for several years but a practical system has not been possible because of technology limitations. New advances in sensing… (more)

Challa, Dinesh Kumar

2009-01-01T23:59:59.000Z

99

Hybrid Quantum Cloning Machine  

E-Print Network (OSTI)

In this work, we introduce a special kind of quantum cloning machine called Hybrid quantum cloning machine. The introduced Hybrid quantum cloning machine or transformation is nothing but a combination of pre-existing quantum cloning transformations. In this sense it creates its own identity in the field of quantum cloners. Hybrid quantum cloning machine can be of two types: (i) State dependent and (ii) State independent or Universal. We study here the above two types of Hybrid quantum cloning machines. Later we will show that the state dependent hybrid quantum-cloning machine can be applied on only four input states. We will also find in this paper another asymmetric universal quantum cloning machine constructed from the combination of optimal universal B-H quantum cloning machine and universal anti-cloning machine. The fidelities of the two outputs are different and their values lie in the neighborhood of ${5/6} $

Satyabrata Adhikari; A. K. Pati; Indranil Chakrabarty; B. S. Choudhury

2007-05-04T23:59:59.000Z

100

Laboratory automation-A case history  

Science Journals Connector (OSTI)

Laboratory automation-A case history ... This article describes an automated Raman spectrometer. ...

Bernard J. Bulkin; Edward H. Cole; Arthur Noguerola

1974-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Vehicle Technologies Office: Electrical Machines  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrical Machines to Electrical Machines to someone by E-mail Share Vehicle Technologies Office: Electrical Machines on Facebook Tweet about Vehicle Technologies Office: Electrical Machines on Twitter Bookmark Vehicle Technologies Office: Electrical Machines on Google Bookmark Vehicle Technologies Office: Electrical Machines on Delicious Rank Vehicle Technologies Office: Electrical Machines on Digg Find More places to share Vehicle Technologies Office: Electrical Machines on AddThis.com... Just the Basics Hybrid & Vehicle Systems Energy Storage Advanced Power Electronics & Electrical Machines Power Electronics Electrical Machines Thermal Control & System Integration Advanced Combustion Engines Fuels & Lubricants Materials Technologies Electrical Machines Emphasis in the electrical machines activity is on advanced motor

102

Automated Demand Response and Commissioning  

E-Print Network (OSTI)

Fully-Automated Demand Response Test in Large Facilities14in DR systems. Demand Response using HVAC in Commercialof Fully Automated Demand Response in Large Facilities”

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-01-01T23:59:59.000Z

103

Autonomic Product Development Process Automation.  

E-Print Network (OSTI)

??Market globalization and mass customization requirements are forcing companies towards automation of their product development processes. Many task-specific software solutions provide localized automation. Coordinating these… (more)

Daley, John E.

2007-01-01T23:59:59.000Z

104

Automation Creates New Managers  

Science Journals Connector (OSTI)

AUTOMATION will bring about new and broader patterns in the use of labor and creation of a large group of managers of a new type, says E. W. Engstrom, senior executive vice president of the Radio Corporation of America. With automation, there will no ...

1955-12-12T23:59:59.000Z

105

CNC MACHINE TOOL  

Science Journals Connector (OSTI)

machines are controlled by locally programmable, dedicated micro- or mini-computers. Computer programs resident in the memory of the computer guide the machine tool to cut or form metal to conform to the de...

2000-01-01T23:59:59.000Z

106

Gamow-Teller response in deformed even and odd neutron-rich Zr and Mo isotopes  

E-Print Network (OSTI)

Beta-decay properties of neutron-rich Zr and Mo isotopes are investigated within a microscopic theoretical approach based on the proton-neutron quasiparticle random-phase approximation. The underlying mean field is described self-consistently from deformed Skyrme Hartree-Fock calculations with pairing correlations. Residual separable particle-hole and particle-particle forces are also included in the formalism. The structural evolution in these isotopic chains including both even and odd isotopes is analyzed in terms of the equilibrium deformed shapes. Gamow-Teller strength distributions, beta-decay half-lives, and beta-delayed neutron-emission probabilities are studied, stressing their relevance to describe the path of the nucleosynthesis rapid neutron capture process.

P. Sarriguren; A. Algora; J. Pereira

2014-03-05T23:59:59.000Z

107

Effects of three-nucleon forces and two-body currents on Gamow-Teller strengths  

E-Print Network (OSTI)

We optimize chiral interactions at next-to-next-to leading order to observables in two- and three-nucleon systems, and compute Gamow-Teller transitions in carbon-14, oxygen-22 and oxygen-24 using consistent two-body currents. We compute spectra of the daughter nuclei nitrogen-14, fluorine-22 and fluorine-24 via an isospin-breaking coupled-cluster technique, with several predictions. The two-body currents reduce the Ikeda sum rule, corresponding to a quenching factor q^2 ~ 0.84-0.92 of the axial-vector coupling. The half life of carbon-14 depends on the energy of the first excited 1+ state, the three-nucleon force, and the two-body current.

A. Ekström; G. R. Jansen; K. A. Wendt; G. Hagen; T. Papenbrock; S. Bacca; B. Carlsson; D. Gazit

2014-06-18T23:59:59.000Z

108

The Gamow-Teller response within Skyrme random-phase approximation plus particle-vibration coupling  

E-Print Network (OSTI)

Although many random-phase approximation (RPA) calculations of the Gamow-Teller (GT) response exist, this is not the case for calculations going beyond the mean-field approximation. We apply a consistent model that includes the coupling of the GT resonance to low-lying vibrations, to nuclei of the $fp$ shell. Among other motivations, our goal is to see if the particle-vibration coupling can redistribute the low-lying GT$^+$ strength that is relevant for electron-capture processes in core-collapse supernova. We conclude that the lowering and fragmentation of that strength are consistent with the experimental findings and validate our model. However, the particle-vibration coupling cannot account for the quenching of the total value of the low-lying strength.

Yifei Niu; Gianluca Colo; Marco Brenna; Marco Brenna; Pier Francesco Bortignon; Jie Meng

2012-03-28T23:59:59.000Z

109

Millikelvin Lab Machine Shop  

E-Print Network (OSTI)

Millikelvin Lab OP105­112 Machine Shop OP132 Resistive Magnet Shop CICC Winding Area Transformers This building is home to the Millikelvin lab, the control room, the resistive magnet and machine shops, the CICC@magnet.fsu.edu (850) 644-4378 (850) 644-0534 2 MACHINE SHOP OP132 Vaughan Williams (A114*) williams

McQuade, D. Tyler

110

Talking Vending Machines  

E-Print Network (OSTI)

're in the central Tokyo Station and you're thirsty so you go to the, you know, vending machine to buy a drink. Only this is not your average vending machine. Uh uh. This vending machine has opinions on what beverage you want. Sensors built into large touch panels...

Hacker, Randi

2011-02-02T23:59:59.000Z

111

What is Machine Learning? About the Course Example Machine Learning  

E-Print Network (OSTI)

What is Machine Learning? About the Course Example Machine Learning DD2431 ¨Orjan Ekeberg Oct­Dec, 2008 What is Machine Learning? About the Course Example 1 What is Machine Learning? Definition A Hypothetical Project What is Machine Learning? About the Course Example 1 What is Machine Learning? Definition

Kjellström, Hedvig

112

What is Machine Learning? About the Course Example Machine Learning  

E-Print Network (OSTI)

What is Machine Learning? About the Course Example Machine Learning DD2431 ¨Orjan Ekeberg Oct­Dec, 2007 What is Machine Learning? About the Course Example 1 What is Machine Learning? Definition A Hypothetical Project What is Machine Learning? About the Course Example 1 What is Machine Learning? Definition

Kjellström, Hedvig

113

A new hybrid machine design for a 6 DOF industrial robot arm  

Science Journals Connector (OSTI)

Industrial robot arms are an essential part of automated manufacturing. They automate tasks such as component assembly, welding, light machining and spray painting due to their repeatability, speed and accuracy. The serial industrial robot arm architecture is the most ubiquitous in modern day manufacturing as its technology is mature; the machine architecture provides extreme dexterity and it has a large useful workspace. This architecture however does have some problems; first the machine mass distribution is not efficient as that mass is spread throughout the arm, and the arm itself contains significant inertia, which also leads to some inaccuracy and dynamic vibration problems. The reason for this lies in the location of the motors. This paper focuses on the conceptual design of a novel robotic arm having a hybrid nature, as its architecture departs from both the classic definitions of Serial Kinematics Machines (SKMs) and Parallel Kinematics Machines (PKMs).

Ahmed Asif Shaik; Nkgatho S. Tlale; Glen Bright

2012-01-01T23:59:59.000Z

114

Cognitive Engineering Automation and Human  

E-Print Network (OSTI)

· Home automation · Robotics · Unmanned vehicles (UAVs and UGVs) · Drug design/Molecular geneticsCognitive Engineering PSYC 530 Automation and Human Performance Raja Parasuraman #12;Overview Automation-Related Accidents Levels and Stages of Automation Information Acquisition and Analysis Decision

Parasuraman, Raja

115

Automation of Feynman Diagram Evaluation  

E-Print Network (OSTI)

A C-program DIANA (DIagram ANAlyser) for the automation of Feynman diagram evaluations is presented.

M. Tentyukov; J. Fleischer

1998-02-04T23:59:59.000Z

116

A gestalt framework for virtual machine control of automated tools  

E-Print Network (OSTI)

Computer aided design has become affordable and ubiquitous, in part as a result of the development of open source design software and web-based 3D modeling tools. Consequently, a broad spectrum of individuals are expressing ...

Moyer, Ilan Ellison

2013-01-01T23:59:59.000Z

117

Automated structural damage detection using one class machine learning  

E-Print Network (OSTI)

Measuring and analysing the vibration of structures using sensors can help identify and detect damage, potentially prolonging the life of structures and preventing disasters. Wireless sensor systems promise to make this ...

Long, James, S.M. Massachusetts Institute of Technology

2014-01-01T23:59:59.000Z

118

Automation and the situation awareness of drivers in agricultural semi-autonomous vehicles  

Science Journals Connector (OSTI)

The effects of in-vehicle automation and driving assistant systems on the situation awareness of drivers have been the subject of much research with the implications of automation in such man-machine systems being identified. With the introduction of advanced automated systems in agricultural machinery, farmers are now working with semi-autonomous vehicles. A human factors perspective is needed to ensure the safe and efficient operation of such systems. This simulator study investigated the effects of automating vehicle steering and implement control and monitoring task automation on the situation awareness of drivers. Experiments were conducted using a tractor driving simulator located in the Agricultural Ergonomics Laboratory at the University of Manitoba. Thirty young, experienced tractor drivers participated in this study. It was found that implement control and monitoring task automation significantly affected the situation awareness of operators. Situation awareness increased as the level of automation support increased although the highest level of automation, where the participants were removed from the task loop, resulted in low situation awareness at a level similar to the condition with no automation support. The highest level of situation awareness was observed when the simulator suggested the required action to be taken by the operator. Vehicle steering task automation reduced the attentional demand of the task.

Behzad Bashiri; Danny D. Mann

2014-01-01T23:59:59.000Z

119

Shielded cells transfer automation  

SciTech Connect

Nuclear waste from shielded cells is removed, packaged, and transferred manually in many nuclear facilities. Radiation exposure is absorbed by operators during these operations and limited only through procedural controls. Technological advances in automation using robotics have allowed a production waste removal operation to be automated to reduce radiation exposure. The robotic system bags waste containers out of glove box and transfers them to a shielded container. Operators control the system outside the system work area via television cameras. 9 figures.

Fisher, J J

1984-01-01T23:59:59.000Z

120

Automated Lattice Perturbation Theory  

SciTech Connect

I review recent developments in automated lattice perturbation theory. Starting with an overview of lattice perturbation theory, I focus on the three automation packages currently "on the market": HiPPy/HPsrc, Pastor and PhySyCAl. I highlight some recent applications of these methods, particularly in B physics. In the final section I briefly discuss the related, but distinct, approach of numerical stochastic perturbation theory.

Monahan, Christopher

2014-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Towards Automated Invocation of Web APIs  

E-Print Network (OSTI)

Abstract. This paper, targeting the large variety of Web APIs, presents an approach towards automated invocation of Web APIs. This approach applies a data schema, to the SAWSDL lowering schema mapping, a grounding mechanism that connects the ontological representations of Web APIs with their execution messages. It is intuitive to existing standard efforts and effective in coping with the heterogeneities witnessed by a majority of Web APIs. 1. Invocation of Linked Web APIs In recent years, the world of service on the Web has witnessed an increasing dominance of Web APIs over “classical ” Web services characterized by WSDL and SOAP [1]. The Semantic Web Service (SWS) community, aiming to increase the level of automation for tasks like discovery, composition and invocation through semantic descriptions, is challenged by the large variety of Web APIs, particularly when it comes to automated invocation. Not only are Web APIs heterogeneous in the forms of elements essential to their invocation, such as address URI, but they also lack machine processable descriptions to address this heterogeneity [1]. hRESTS, a

Ning Li; Carlos Pedrinaci; Jacek Kopecky; Maria Maleshkova; Dong Liu; John Domingue

2011-01-01T23:59:59.000Z

122

Home Network Technologies and Automating Demand Response  

E-Print Network (OSTI)

potential role of home automation networks in implementinghow existing and future home automation systems may providehome networks" and "home automation" are frequently used

McParland, Charles

2010-01-01T23:59:59.000Z

123

Development of Building Automation and Control Systems  

E-Print Network (OSTI)

A design flow for building automation and control systems,’’Development of Building Automation and Control Systems Yangdesign of the build- ing automation system (including the

Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

2012-01-01T23:59:59.000Z

124

Machine tool locator  

DOE Patents (OSTI)

Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

Hanlon, John A. (Los Alamos, NM); Gill, Timothy J. (Stanley, NM)

2001-01-01T23:59:59.000Z

125

What Can Turing Machines Do? How powerful are Turing machines?  

E-Print Network (OSTI)

1 What Can Turing Machines Do? How powerful are Turing machines? Turing machines can accept any regular or context- free language. Turing machines can perform basic arithmetic computations. Sequencing can be implemented on Turing ma- chines. Subroutine calls can be implemented on Turing machines

Bylander, Tom

126

Quantum Learning Machine  

E-Print Network (OSTI)

We propose a novel notion of a quantum learning machine for automatically controlling quantum coherence and for developing quantum algorithms. A quantum learning machine can be trained to learn a certain task with no a priori knowledge on its algorithm. As an example, it is demonstrated that the quantum learning machine learns Deutsch's task and finds itself a quantum algorithm, that is different from but equivalent to the original one.

Jeongho Bang; James Lim; M. S. Kim; Jinhyoung Lee

2008-03-20T23:59:59.000Z

127

A Born-Oppenheimer Expansion in a Neighborhood of a Renner-Teller Intersection  

E-Print Network (OSTI)

We perform a rigorous mathematical analysis of the bending modes of a linear triatomic molecule that exhibits the Renner-Teller effect. Assuming the potentials are smooth, we prove that the wave functions and energy levels have asymptotic expansions in powers of epsilon, where epsilon^4 is the ratio of an electron mass to the mass of a nucleus. To prove the validity of the expansion, we must prove various properties of the leading order equations and their solutions. The leading order eigenvalue problem is analyzed in terms of a parameter b, which is equivalent to the parameter originally used by Renner. For 0 < b < 1, we prove self-adjointness of the leading order Hamiltonian, that it has purely discrete spectrum, and that its eigenfunctions and their derivatives decay exponentially. Perturbation theory and finite difference calculations suggest that the ground bending vibrational state is involved in a level crossing near b = 0.925. We also discuss the degeneracy of the eigenvalues. Because of the crossing, the ground state is degenerate for 0 < b < 0.925 and non-degenerate for 0.925 < b < 1.

Mark S. Herman

2009-01-22T23:59:59.000Z

128

Gamow-Teller strength in Na23(n,p) and a comparison to Na23(?-,?)  

Science Journals Connector (OSTI)

We report measurements of the Na23(n,p) differential cross section at an incident energy of 198 MeV and angles from 0° to 24° using the TRIUMF Charge Exchange Facility. From these data we determine Gamow-Teller (GT) transition probabilities to low lying 1/2+, 3/2+, and 5/2+ Ne23 states and the GT+ strength distribution up to 25 MeV excitation energy. The values of BGT+ to discrete states, and the GT+ strength below 10 MeV, are found to be in reasonable agreement with a full 1s-0d shell model calculation with a normalization factor of about 0.74. The GT+ strength above 10 MeV suggests the removal of strength from lower to higher excitation energies. We also compare the Na23(n,p) data with Na23(?-,?) data and find agreement between the values of BGT+ to discrete levels extracted from the (n,p) and (?-,?) reactions. The general consistency of the (n,p) and (?-,?) data, and the full 1s-0d shell model calculation, give confidence in a recent extraction of the weak pseudoscalar coupling from ?- capture on Na23. Finally, using both ?--decay and ?- capture data, we obtain unit cross sections from the Na23(n,p) measurement.

B. Siebels; T. P. Gorringe; W. P. Alford; J. Bauer; J. Evans; S. El-Kateb; K. P. Jackson; A. Trudel; S. Yen

1995-09-01T23:59:59.000Z

129

Lecture outline Support vector machines  

E-Print Network (OSTI)

Lecture outline · Support vector machines #12;Support Vector Machines · Find a linear hyperplane (decision boundary) that will separate the data #12;Support Vector Machines · One Possible Solution #12;Support Vector Machines · Another possible solution #12;Support Vector Machines · Other possible solutions

Terzi, Evimaria

130

Lecture outline Support vector machines  

E-Print Network (OSTI)

Lecture outline · Support vector machines #12;Support Vector Machines · Find a linear hyperplane (decision boundary) that will separate the data #12;Support Vector Machines · One Possible Solution B1 #12;Support Vector Machines · Another possible solution B2 #12;Support Vector Machines · Other possible

Terzi, Evimaria

131

Structural Risk Minimization Kernels Support Vector Machines Support Vector Machines  

E-Print Network (OSTI)

Dimensional Spaces Many acceptable solutions bad generalization Structural Risk Minimization Kernels SupportStructural Risk Minimization Kernels Support Vector Machines Support Vector Machines Kernel Methods Structural Risk Minimization Kernels Support Vector Machines 1 Structural Risk Minimization High Dimensional

Kjellström, Hedvig

132

Structural Risk Minimization Kernels Support Vector Machines Support Vector Machines  

E-Print Network (OSTI)

Dimensional Spaces Many acceptable solutions #12;Structural Risk Minimization Kernels Support Vector Machines High Dimensional Spaces Many acceptable solutions bad generalization #12;Structural Risk MinimizationStructural Risk Minimization Kernels Support Vector Machines Support Vector Machines Kernel Methods

Kjellström, Hedvig

133

Diamond machine tool face lapping machine  

DOE Patents (OSTI)

An apparatus for shaping, sharpening and polishing diamond-tipped single-point machine tools. The isolation of a rotating grinding wheel from its driving apparatus using an air bearing and causing the tool to be shaped, polished or sharpened to be moved across the surface of the grinding wheel so that it does not remain at one radius for more than a single rotation of the grinding wheel has been found to readily result in machine tools of a quality which can only be obtained by the most tedious and costly processing procedures, and previously unattainable by simple lapping techniques.

Yetter, H.H.

1985-05-06T23:59:59.000Z

134

Honeywell Demonstrates Automated Demand Response Benefits for...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Honeywell Demonstrates Automated Demand Response Benefits for Utility, Commercial, and Industrial Customers Honeywell Demonstrates Automated Demand Response Benefits for Utility,...

135

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS  

E-Print Network (OSTI)

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS: 2006 PROGRAM DESCRIPTION AND RESULTS APPENDICES.................................................................................... 5 B.2. DR Automation Server User Guide

136

Development of Building Automation and Control Systems  

E-Print Network (OSTI)

Johnson Controls, 70 in Automated Logic EIKON language, 42systems developed by Automated Logic. Similarly as shown in

Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

2012-01-01T23:59:59.000Z

137

HIGHLY AUTOMATED MACROMOLECULAR  

NLE Websites -- All DOE Office Websites (Extended Search)

AUTOMATED MACROMOLECULAR AUTOMATED MACROMOLECULAR CRYSTALLOGRAPHY BEAMLINE (AMX) Group Leader: Dieter Schneider Proposal Team: M. Allaire 1 , L. Berman 1 , M. Chance 2 , W. Hendrickson 3 , A. Héroux 1 , J. Jakoncic 1 , A. Orville 1 , H. Robinson 1 , D. Schneider 1 , W. Shi 2 , A. Soares 1 , V. Stojanoff 1 , R. Sweet 1 1 Brookhaven National Laboratory, 2 Case Western Reserve University, 3 Columbia University MISSION APPLICATIONS AND CAPABILITIES ADDITIONAL INFORMATION * AMX at NSLS-II will provide structural biologists with ready access to an advanced macromolecular crystallography (MX) beamline for the elucidation of structure and function of macromolecular complexes. * Its high flux, tunable energy, and natively small focal spot will make it a crystallographer's preferred beamline. * Its high degree of automation will provide a high throughput

138

Automation Status | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automation Status Automation Status Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011. mfg2011plenarysperrick.pdf More...

139

Automation on the laboratory bench  

Science Journals Connector (OSTI)

Automation on the laboratory bench ... In designing an automation kit the authors attempted to give chemistry a system which is versatile and easy to apply in taking over the boring and difficult task of controlling parameters manually. ...

M. Legrand; A. Foucard

1978-01-01T23:59:59.000Z

140

On parallel machine scheduling 1  

E-Print Network (OSTI)

On parallel machine scheduling 1 machines with setup times. The setup has to be performed by a single server. The objective is to minimize even for the case of two identical parallel machines. This paper presents a pseudopolynomial

Magdeburg, Universität

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

CNC machines(CNC Maschinen)  

Science Journals Connector (OSTI)

The machining of metal components had been done in the past by using conventional machine tools like lathes, milling machines, etc. and the accuracy of the work done was dependent on the skill and experience of t...

2006-01-01T23:59:59.000Z

142

Automation: Congress' Next Probe  

Science Journals Connector (OSTI)

THE stage is being set for a Congressional investigation of the trend toward automation in industry. From all indications, this could become one of the hottest subjects in labor-management relations during the coming year.Formal hearings have been ...

1955-08-29T23:59:59.000Z

143

Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response  

E-Print Network (OSTI)

Protocol for Building Automation and Control  Networks.  Protocol for Building Automation and Control  Networks, Demand Response Automation Server  Demand Response Research 

Kiliccote, Sila

2011-01-01T23:59:59.000Z

144

Automated Removal of Partial Occlusion Blur Scott McCloskey, Michael Langer, and Kaleem Siddiqi  

E-Print Network (OSTI)

Automated Removal of Partial Occlusion Blur Scott McCloskey, Michael Langer, and Kaleem Siddiqi Centre for Intelligent Machines, McGill University {scott,langer,siddiqi}@cim.mcgill.ca Abstract are found by a user. Because Y. Yagi et al. (Eds.): ACCV 2007, Part I, LNCS 4843, pp. 271­281, 2007. c

Langer, Michael

145

Towards automation of low standardized logistic processes by use of cyber physical robotic systems (CPRS)  

Science Journals Connector (OSTI)

Global logistics networks have an increasing demand for handling of general cargo. Particularly, huband-spoke networks requires a lot of handling actions in order to realize benefits in comparison to point-to-point networks. The use of automation technologies ... Keywords: cooperative robotics, cyber physical systems, human computer interaction, human machine interface, industrial robots, virtual reality

Bernd Scholz-Reiter; Moritz Rohde; Stefan Kunaschk; Michael Lütjen

2011-11-01T23:59:59.000Z

146

Universal Developer Platform for MachinePlatform for Machine  

E-Print Network (OSTI)

1 Universal Developer Platform for MachinePlatform for Machine Control Applications Hansjoerg will need some things: · Senses · Means June 24-26, 2008 ETH Zurich #12;2 And for Machine Control? June 24 ETH Zurich Conclusion: big effort for things that have little to do with Machine Control Multi

147

Theory of Molecular Machines. I. Channel Capacity of Molecular Machines  

E-Print Network (OSTI)

Theory of Molecular Machines. I. Channel Capacity of Molecular Machines running title: Channel Capacity of Molecular Machines Thomas D. Schneider version = 5.76 of ccmm.tex 2004 Feb 3 Version 5.67 was submitted 1990 December 5 Schneider, T. D. (1991). Theory of molecular machines. I. Channel capacity

Schneider, Thomas D.

148

Fundamentals of Machine Vision  

Science Journals Connector (OSTI)

Machine vision systems have two primary elements: the camera, which serves as the eye of the system, and a computer video image analyzer. Lighting is also an important consideration. The camera, which may be a...

Richard K. Miller CMfgE

1989-01-01T23:59:59.000Z

149

Machine For Grinding Fog  

E-Print Network (OSTI)

Machine For Grinding Fog, an exhibition of stop motion animated films, revolves around three primary concerns: relationships, psychological or subjective reality, and relativity. Rooted within concerns of faith, personal ethics, and a re...

Ward, Nicholas Adam

2010-04-30T23:59:59.000Z

150

Exotic in Leptonic Machines  

E-Print Network (OSTI)

Selected topics of exotics in leptonic machines are presented, including recent discovery of abnormal structures around the ppbar threshold and new information of the XYZ (charmonium-like) states.

Kai Zhu

2014-08-07T23:59:59.000Z

151

Human-machine interactions  

SciTech Connect

Digital technology utilizing a cognitive model based on human naturalistic decision-making processes, including pattern recognition and episodic memory, can reduce the dependency of human-machine interactions on the abilities of a human user and can enable a machine to more closely emulate human-like responses. Such a cognitive model can enable digital technology to use cognitive capacities fundamental to human-like communication and cooperation to interact with humans.

Forsythe, J. Chris (Sandia Park, NM); Xavier, Patrick G. (Albuquerque, NM); Abbott, Robert G. (Albuquerque, NM); Brannon, Nathan G. (Albuquerque, NM); Bernard, Michael L. (Tijeras, NM); Speed, Ann E. (Albuquerque, NM)

2009-04-28T23:59:59.000Z

152

Sealing intersecting vane machines  

DOE Patents (OSTI)

The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through intersecting surfaces without the need for external gearing by modifying the width of one or both tracks at the point of intermeshing. The inventions described herein relate to these improvements.

Martin, Jedd N. (Providence, RI); Chomyszak, Stephen M. (Attleboro, MA)

2007-06-05T23:59:59.000Z

153

Deformation effect on the double Gamow-Teller matrix element of 100Mo for the 0+?0+ transition  

Science Journals Connector (OSTI)

The two neutrino double beta decay of 100Mo for the 0+?0+ transition is studied in the Hartree-Fock-Bogoliubov (HFB) framework. Prior to the calculation of the double Gamow-Teller matrix element MGT2?, the reliability of the intrinsic wave functions has been established by obtaining an overall agreement between a number of theoretically calculated spectroscopic properties and the available experimental data for 100Mo and 100Ru. It has been further noticed that there is a necessity of an appropriate amount of deformation in the HFB intrinsic state to obtain a realistic MGT2?.

B. M. Dixit, P. K. Rath, and P. K. Raina

2002-02-21T23:59:59.000Z

154

Chiral two-body currents in nuclei: Gamow-Teller transitions and neutrinoless double-beta decay  

E-Print Network (OSTI)

We show that chiral effective field theory (EFT) two-body currents provide important contributions to the quenching of low-momentum-transfer Gamow-Teller transitions, and use chiral EFT to predict the momentum-transfer dependence that is probed in neutrinoless double-beta decay. We then calculate for the first time the neutrinoless double-beta decay operator based on chiral EFT currents and study the nuclear matrix elements at successive orders. The contributions from chiral two-body currents are significant and should be included in all calculations.

J. Menéndez; D. Gazit; A. Schwenk

2011-03-18T23:59:59.000Z

155

MACHINE MONITORING USING PROBABILITY THRESHOLDS  

E-Print Network (OSTI)

MACHINE MONITORING USING PROBABILITY THRESHOLDS AND SYSTEM OPERATING CHARACTERISTICS Stephen M a discrete-part production machine, with the objective of effectively determining when to shut the machine analysis: a) There is an underlying time interval that characterizes the operation of the machine, most

Pollock, Stephen

156

Harvesting Machine Census 1999 & 2001  

E-Print Network (OSTI)

1 Harvesting Machine Census 1999 & 2001 231 Corstorphine Road Edinburgh EH12 7AT www.forestry.gov.uk FCTN001 SUMMARY This Technical Note contains information on the 1999 and 2001 harvesting machine machines, converted forwarders, etc., account for the remaining machines. In the 2001 census, 65

157

Non-traditional machining techniques  

SciTech Connect

During the course of machining targets for various experiments it sometimes becomes necessary to adapt fixtures or machines, which are designed for one function, to another function. When adapting a machine or fixture is not adequate, it may be necessary to acquire a machine specifically designed to produce the component required. In addition to the above scenarios, the features of a component may dictate that multi-step machining processes are necessary to produce the component. This paper discusses the machining of four components where adaptation, specialized machine design, or multi-step processes were necessary to produce the components.

Day, Robert D [Los Alamos National Laboratory; Fierro, Frank [Los Alamos National Laboratory; Garcia, Felix P [Los Alamos National Laboratory; Hatch, Douglass J [Los Alamos National Laboratory; Randolph, Randall B [Los Alamos National Laboratory; Reardon, Patrick T [Los Alamos National Laboratory; Rivera, Gerald [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

158

MACHINE LEARNING FOR IDENTIFICATION OF SOURCES OF IONIZING RADIATION DURING SPACE MISSIONS  

E-Print Network (OSTI)

MACHINE LEARNING FOR IDENTIFICATION OF SOURCES OF IONIZING RADIATION DURING SPACE MISSIONS Ricardo for the automated identification and classification of tracks of ionizing radiation during space missions. The tracks of ionizing radiation are mea- sured by the hybrid semiconductor Medipix2 pixel de- tector system

Vilalta, Ricardo

159

Entropy of English text: Experiments with humans and a machine learning system based on rough sets  

E-Print Network (OSTI)

different types of text material (Shannon used only a single book). We also show how the results are affected when we replace the human subjects with a machine learning system based on rough sets. Automating the play of the guessing game with this system...

Moradi, H.; Grzymala-Busse, Jerzy W.; Roberts, James A.

1998-01-01T23:59:59.000Z

160

Automated gas chromatography  

DOE Patents (OSTI)

An apparatus and process for the continuous, near real-time monitoring of low-level concentrations of organic compounds in a liquid, and, more particularly, a water stream. A small liquid volume of flow from a liquid process stream containing organic compounds is diverted by an automated process to a heated vaporization capillary where the liquid volume is vaporized to a gas that flows to an automated gas chromatograph separation column to chromatographically separate the organic compounds. Organic compounds are detected and the information transmitted to a control system for use in process control. Concentrations of organic compounds less than one part per million are detected in less than one minute. 7 figs.

Mowry, C.D.; Blair, D.S.; Rodacy, P.J.; Reber, S.D.

1999-07-13T23:59:59.000Z

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Automated Job Hazards Analysis  

Energy.gov (U.S. Department of Energy (DOE))

AJHA Program - The Automated Job Hazard Analysis (AJHA) computer program is part of an enhanced work planning process employed at the Department of Energy's Hanford worksite. The AJHA system is routinely used to performed evaluations for medium and high risk work, and in the development of corrective maintenance work packages at the site. The tool is designed to ensure that workers are fully involved in identifying the hazards, requirements, and controls associated with tasks.

162

TJ Automation | Open Energy Information  

Open Energy Info (EERE)

TJ Automation TJ Automation Jump to: navigation, search Name TJ Automation Facility TJ Automation Sector Wind energy Facility Type Small Scale Wind Facility Status In Service Owner TJ Automation Energy Purchaser TJ Automation Location Archbold OH Coordinates 41.45823855°, -84.30666804° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.45823855,"lon":-84.30666804,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

163

Report blasts Patent Office automation  

Science Journals Connector (OSTI)

Report blasts Patent Office automation ... The Department of Commerce is moving quickly to implement a report highly critical of the Patent & Trademark Office's efforts to fully automate its patent search and retrieval operations. ... An Industry Review Panel found that the current automated patent system is over-designed and as a result needs a redundant communications network and redundant storage of all patent images at high resolution. ...

JANICE LONG

1988-05-30T23:59:59.000Z

164

BCDA Machine Status Link  

NLE Websites -- All DOE Office Websites (Extended Search)

Machine Status Link Machine Status Link Version 1.33 (December 2005) David M. Kline. The Machine Status Link (MSL) is responsible for distributing the digitized beam current, injection status, P0 clock, and other statuses over a single fiber to several locations around the Storage Ring. The MRD100 is a VME-based module that is part of the MSL and was specifically designed for the APS. It receives and interprets information from the XMS100 module by means of copper or fiber. Signals from the XMS100 module are sent at a P0 rate (3.667 microseconds). It sends two registers every cycle and all in about 12 cycles. Refer to the ASD website for additional information regarding the MSL. The focus of this page is to provide information of how to configure the MRD100 for a beamline IOC and to discuss the sample IOC

165

Micro-machined resonator  

DOE Patents (OSTI)

A micro-machined resonator, typically quartz, with upper and lower micro-machinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrode through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

Godshall, N.A.; Koehler, D.R.; Liang, A.Y.; Smith, B.K.

1993-03-30T23:59:59.000Z

166

Micro-machined resonator  

DOE Patents (OSTI)

A micro-machined resonator, typically quartz, with upper and lower micro-machinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrode through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

Godshall, Ned A. (Albuquerque, NM); Koehler, Dale R. (Albuquerque, NM); Liang, Alan Y. (Albuquerque, NM); Smith, Bradley K. (Albuquerque, NM)

1993-01-01T23:59:59.000Z

167

AUTOMATED ~.JELDING -RESEARCH NEEDS T. H. Eagar  

E-Print Network (OSTI)

) ) ..... . '. AUTOMATED ~.JELDING - RESEARCH NEEDS T. H. Eagar Department of Naterials Science and Engineering Nassachusetts Institute of Technology Cambridge, Hassachusetts 02139 Increased use of automated is necessary in order to develop reliable automated welding techniques. #12;Introduction During the past decade

Eagar, Thomas W.

168

Precision Robotic Assembly Machine  

SciTech Connect

The world's largest laser system is the National Ignition Facility (NIF), located at Lawrence Livermore National Laboratory. NIF's 192 laser beams are amplified to extremely high energy, and then focused onto a tiny target about the size of a BB, containing frozen hydrogen gas. The target must be perfectly machined to incredibly demanding specifications. The Laboratory's scientists and engineers have developed a device called the "Precision Robotic Assembly Machine" for this purpose. Its unique design won a prestigious R&D-100 award from R&D Magazine.

2009-08-14T23:59:59.000Z

169

State machine replication for wide area networks  

E-Print Network (OSTI)

state machine . . . . . . . . . . . . . . . . . . 2.4 FLP5.3.3 P: A simple state machine . . . . . . 5.3.4performance metrics of state machine R compared to consensus

Mao, Yanhua

2010-01-01T23:59:59.000Z

170

Fingerprinting Communication and Computation on HPC Machines  

E-Print Network (OSTI)

the Closed World: On Using Machine Learn- ing for Networkand Computation on HPC Machines Sean Peisert Computationalcode running on HPC machines using elements of communication

Peisert, Sean

2010-01-01T23:59:59.000Z

171

Supernova Recognition using Support Vector Machines  

E-Print Network (OSTI)

tion Using Support Vector Machines and Neural Networks.using Support Vector Machines Raquel A. Romano Cecilia R.nding supernovae do not employ machine learning techniques.

Romano, Raquel A.; Aragon, Cecilia R.; Ding, Chris

2006-01-01T23:59:59.000Z

172

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network (OSTI)

Facility Technician) Automated Logic Corporation: Ivanembedded in the Target’s Automated Logic Corporation (ALC)

Kiliccote, Sila

2010-01-01T23:59:59.000Z

173

Automating dipole subtraction  

E-Print Network (OSTI)

We report on automating the Catani-Seymour dipole subtraction which is a general procedure to treat infrared divergences in real emission processes at next-to-leading order in QCD. The automatization rests on three essential steps: the creation of the dipole terms, the calculation of the color linked squared Born matrix elements, and the evaluation of different helicity amplitudes. The routines have been tested for a number of complex processes, such as the real emission process gg --> t anti-t ggg.

K. Hasegawa; S. Moch; P. Uwer

2008-07-23T23:59:59.000Z

174

Automation in Process Industry: Cure or Curse? How can Training Improve Operator’s Performance  

Science Journals Connector (OSTI)

Abstract Automation in the process industry has seen its implication and implementation since 1960’s. However, during last decades the “trend” of integrating advanced and sophisticated process control techniques like process optimization, soft sensors, MPC, RTO has significantly increased. The reasons that can be attributed to the increase in automation are mainly the implementation cost respect to expected revenues and the wide range of alternatives and suppliers. Unfortunately, the inclusion of automation coupled to either new plants/processes or process retrofitting and revamping neglected often the operator’s characteristics that can be summarized with the human factor term. This paper provides an insight to the extensive use of automation and the associated challenges that an industrial operator faces because of information overload, human machine interface, and automation complexity. The forgotten part, i.e. the human (operator) element, is emphasized with respect to the operations in control room and in the field. The impact of complexity of automation on the nature of operator error is discussed for both normal operating conditions and abnormal situations. A case study reflecting automation failure combined with human error(s) is presented. Finally, a Hierarchal Training Syllabus (HTS) is proposed by using a so called Plant Simulator. The features and relevant benefits of HTS are also outlined.

Salman Nazir; Annette Kluge; Davide Manca

2014-01-01T23:59:59.000Z

175

Scaling up: Distributed machine learning with cooperation  

SciTech Connect

Machine-learning methods are becoming increasingly popular for automated data analysis. However, standard methods do not scale up to massive scientific and business data sets without expensive hardware. This paper investigates a practical alternative for scaling up: the use of distributed processing to take advantage of the often dormant PCs and workstations available on local networks. Each workstation runs a common rule-learning program on a subset of the data. We first show that for commonly used rule-evaluation criteria, a simple form of cooperation can guarantee that a rule will look good to the set of cooperating learners if and only if it would look good to a single learner operating with the entire data set. We then show how such a system can further capitalize on different perspectives by sharing learned knowledge for significant reduction in search effort. We demonstrate the power of the method by learning from a massive data set taken from the domain of cellular fraud detection. Finally, we provide an overview of other methods for scaling up machine learning.

Provost, F.J. [NYNEX Science & Technology, White Plains, NY (United States); Hennessy, D.N. [Univ. of Pittsburgh, PA (United States)

1996-12-31T23:59:59.000Z

176

Installation and Commissioning Automated Demand Response Systems  

E-Print Network (OSTI)

their partnership in demand response automation research andand Techniques for Demand Response. LBNL Report 59975. Mayof Fully Automated Demand Response in Large Facilities.

Kiliccote, Sila; Global Energy Partners; Pacific Gas and Electric Company

2008-01-01T23:59:59.000Z

177

Home Network Technologies and Automating Demand Response  

E-Print Network (OSTI)

and Automating Demand Response Charles McParland, Lawrenceand Automating Demand Response Charles McParland, LBNLCommercial and Residential Demand Response Overview of the

McParland, Charles

2010-01-01T23:59:59.000Z

178

Automation in X-Ray Crystallography  

Science Journals Connector (OSTI)

Automation in X-Ray Crystallography ... But in the past few years, automation procedures have been applied to intrinsically superior experimental methods. ...

S.C. ABRAHAMS

1963-06-03T23:59:59.000Z

179

Understanding roi metrics for software test automation.  

E-Print Network (OSTI)

??Software test automation is widely accepted as an efficient software testing technique. However, automation has failed to deliver the expected productivity more often than not.… (more)

Jayachandran, Naveen

2005-01-01T23:59:59.000Z

180

Lack of a Jahn-Teller Distortion in La1-xSrxCoO3 Determined by EXAFS and  

NLE Websites -- All DOE Office Websites (Extended Search)

Lack of a Jahn-Teller Distortion in Lack of a Jahn-Teller Distortion in La1-xSrxCoO3 Determined by EXAFS and Neutron PDF Studies The transition metal oxides exhibit a wide range of interesting properties, of which superconductivity in the copper oxides and colossal magnetoresistance in the manganese oxides are perhaps the best known. However, the strange magnetic behavior of several cobalt oxides is another example of these unusual properties, although not yet as intensively studied. The cobaltite system La1-xSrxCoO3 (LSCO) has a rich temperature-concentration phase diagram with anti-ferromagnetism and insulating behavior at low Sr concentrations, and ferromagnetism and metallic behavior at higher concentrations. The magnetism for the end compound LaCoO3 (LCO) is particularly unusual; it has no Co spin magnetic moment at low T (and is diamagnetic). As T increases from 4K, the magnetic susceptibility increases dramatically up to roughly 100K, and then decreases as T is increased to 300K. This behavior has been attributed to Co+3 having several different spin configurations. Initially only two were considered, a low spin state (LS, S=0) that is not magnetic and a high spin state (HS, S=2) that is strongly magnetic. In the '90s a third, intermediate spin configuration (IS, S=1) was proposed by Potze, et al. and Korotin, et al; this configuration should result in a distortion of the CoO6 octahedra (called a Jahn-Teller (JT) distortion). In the late '90s, Louca et al. reported neutron PDF results indicating a distorted Co-O environment, comparable to the Mn-O distortions observed in the similar manganite systems La1-yCayMnO3 (LCMO) and La1-zSrzMnO3 (LSMO). However, to date, these neutron PDF data for the cobaltites are the only structural results that support a JT distortion. While some recent experimental results are argued to be consistent with a large Co-O JT distortion and its associated IS state, many others appear to be inconsistent with such an interpretation. Our group at UC Santa Cruz, therefore took a closer look at the possibility of a JT distortion of the CoO6 octahedra, using a combination of the EXAFS and neutron PDF techniques; here we focus on the Co K-edge EXAFS results, for data collected at SSRL.

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

The hiphop virtual machine  

Science Journals Connector (OSTI)

The HipHop Virtual Machine (HHVM) is a JIT compiler and runtime for PHP. While PHP values are dynamically typed, real programs often have latent types that are useful for optimization once discovered. Some types can be proven through static analysis, ... Keywords: dynamic languages, jit compiler, php, tracelet

Keith Adams, Jason Evans, Bertrand Maher, Guilherme Ottoni, Andrew Paroski, Brett Simmers, Edwin Smith, Owen Yamauchi

2014-10-01T23:59:59.000Z

182

Heat Machines and Quantum Systems  

E-Print Network (OSTI)

Heat Machines and Quantum Systems: Towards the Third Law Thesis submitted for the degree of "Doctor Machines and Quantum Systems: Towards the Third Law Thesis submitted for the degree of "Doctor

Kosloff, Ronnie

183

On-machine 3D vision system for machining setup modeling  

E-Print Network (OSTI)

3 ORIGINAL ARTICLE On-machine 3D vision system for machiningIn computer numerical control machine tools, using machiningIn this paper, an on-machine vision system is presented to

Zhang, Xi; Tian, Xiaodong; Yamazaki, Kazuo

2010-01-01T23:59:59.000Z

184

The Fusion Machine (extended abstract)  

E-Print Network (OSTI)

The Fusion Machine (extended abstract) Philippa Gardner Cosimo Laneve Lucian Wischik March 27, 2002. In particular, we describe a dis- tributed abstract machine called the fusion machine. In it, only channels exist at runtime. It uses a form of concurrent constraints called fusions--equations on channel names

Gardner, Philippa

185

Materialization of Universal Turing Machines  

E-Print Network (OSTI)

Materialization of Universal Turing Machines Rainer Glaschick supporting Heinz-Nixdorf MuseumsForum Paderborn, Germany #12;Contents Alan Turing's relation to Germany Turing Machines Hasenjaeger on secret communications 1947: Göttingen -- inquiry on state of computing machines #12;Turing and Münster

186

Toolbox Safety Talk Woodworking Machines  

E-Print Network (OSTI)

Toolbox Safety Talk Woodworking Machines Environmental Health & Safety Facilities Safety & Health to Environmental Health & Safety for recordkeeping. Machine shops are an integral part of the Cornell University for many student courses and elective activities. Woodworking machines can pose a myriad of hazards

Pawlowski, Wojtek

187

CLASSIFYING MICROARRAY DATA USING SUPPORT VECTOR MACHINES  

E-Print Network (OSTI)

Chapter 9 CLASSIFYING MICROARRAY DATA USING SUPPORT VECTOR MACHINES Sayan Mukherjee Post biological systems. Molecular classification approaches based on machine learning algorithms applied to DNA., 2001). One particular machine learning algorithm, Support Vector Machines (SVMs), has shown promise

Mukherjee, Sayan

188

Computational Models -Lecture 6 Turing Machines  

E-Print Network (OSTI)

Computational Models - Lecture 6 Turing Machines Slides modified by Benny Chor, based on original Models - Lecture 6 Turing Machines Turing Machines Slides modified by Benny Chor, based on original Models - Lecture 6 Turing Machines Turing Machines Turing Machines Slides modified by Benny Chor, based

Beimel, Amos

189

International Business Machines Corporation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Business Machines Corporation Business Machines Corporation Thomas J. Watson Research Center 1101 Kitchawan Road, NY 10598 Office of the Assistant General Counsel for Technology Transfer and Intellectual Property U.S. Department of Energy 1000 Independence Ave, SW, Washington DC 20585 ATTN: TECHNOLOGY TRANSFER QUESTIONS Sent electronically to GC-62@hq.doe.gov RE: Questions Concerning Technology Transfer Practices at DOE Laboratories Federal Register, Vol. 73, No. 229 Dear Mr. Gottlieb: IBM Corporation appreciates the opportunity to provide comments in response to the Department of Energy notice of inquiry. DOE Laboratories are a fundamental resource to government, industry, academia and the economy as a whole. All can benefit from efficient contracting processes and

190

IEEE Robotics & Automation Magazine42 1070-9932/08/$25.002008 IEEE SEPTEMBER 2008 Series Compliance for  

E-Print Network (OSTI)

computer numeric control (CNC) machining, robotic weld- ing, painting, and pick-and-place circuit boardIEEE Robotics & Automation Magazine42 1070-9932/08/$25.00ª2008 IEEE SEPTEMBER 2008 Series Compliance for an Efficient Running Gait M any robots excel at precise position- ing and trajectory tracking

Hurst, Jonathan

191

MATERIAL PROCESSING FOR SELF-ASSEMBLING MACHINE SYSTEMS  

SciTech Connect

We are developing an important aspect of a new technology based on self-reproducing machine systems. Such systems could overcome resource limitations and control the deleterious side effects of human activities on the environment. Machine systems capable of building themselves promise an increase in industrial productivity as dramatic as that of the industrial revolution. To operate successfully, such systems must procure necessary raw materials from their surroundings. Therefore, next to automation, most critical for this new technology is the ability to extract important chemicals from readily available soils. In contrast to conventional metallurgical practice, these extraction processes cannot make substantial use of rare elements. We have designed a thermodynamically viable process and experimentally demonstrated most steps that differ from common practice. To this end we had to develop a small, disposable vacuum furnace system. Our work points to a viable extraction process.

K. LACKNER; D. BUTT; C. WENDT

1999-06-01T23:59:59.000Z

192

Honeywell modular automation system acceptance test report  

SciTech Connect

This document provides the results of the Acceptance Test Procedure for the Honeywell Modular Automation System.

Cunningham, L.T., Westinghouse Hanford

1996-06-14T23:59:59.000Z

193

Automated Morphology Analysis of Nanoparticles  

E-Print Network (OSTI)

of this dissertation is to develop automated morphology analysis methods. Morphology analysis is comprised of three tasks: separate individual particles from an agglomerate of overlapping nano-objects (image segmentation); infer the particle's missing contours (shape...

Park, Chiwoo

2012-10-19T23:59:59.000Z

194

Aspects of automation mode confusion  

E-Print Network (OSTI)

Complex systems such as commercial aircraft are difficult for operators to manage. Designers, intending to simplify the interface between the operator and the system, have introduced automation to assist the operator. In ...

Wheeler, Paul H. (Paul Harrison)

2007-01-01T23:59:59.000Z

195

Technology modernization assessment flexible automation  

SciTech Connect

The objectives of this report are: to present technology assessment guidelines to be considered in conjunction with defense regulations before an automation project is developed to give examples showing how assessment guidelines may be applied to a current project to present several potential areas where automation might be applied successfully in the depot system. Depots perform primarily repair and remanufacturing operations, with limited small batch manufacturing runs. While certain activities (such as Management Information Systems and warehousing) are directly applicable to either environment, the majority of applications will require combining existing and emerging technologies in different ways, with the special needs of depot remanufacturing environment. Industry generally enjoys the ability to make revisions to its product lines seasonally, followed by batch runs of thousands or more. Depot batch runs are in the tens, at best the hundreds, of parts with a potential for large variation in product mix; reconfiguration may be required on a week-to-week basis. This need for a higher degree of flexibility suggests a higher level of operator interaction, and, in turn, control systems that go beyond the state of the art for less flexible automation and industry in general. This report investigates the benefits and barriers to automation and concludes that, while significant benefits do exist for automation, depots must be prepared to carefully investigate the technical feasibility of each opportunity and the life-cycle costs associated with implementation. Implementation is suggested in two ways: (1) develop an implementation plan for automation technologies based on results of small demonstration automation projects; (2) use phased implementation for both these and later stage automation projects to allow major technical and administrative risk issues to be addressed. 10 refs., 2 figs., 2 tabs. (JF)

Bennett, D.W.; Boyd, D.R.; Hansen, N.H.; Hansen, M.A.; Yount, J.A.

1990-12-01T23:59:59.000Z

196

The 'Problem' with Automation: Inappropriate Feedback and Interaction, not 'Over-Automation'  

Science Journals Connector (OSTI)

12 April 1990 research-article The 'Problem' with Automation: Inappropriate Feedback and Interaction, not 'Over-Automation' D. A. Norman As automation increasingly takes its place in industry, especially high risk industry...

1990-01-01T23:59:59.000Z

197

Participation through Automation: Fully Automated Critical Peak Pricing in Commercial Buildings  

E-Print Network (OSTI)

Figure 2. Demand Response Automation Server and BuildingII system to notify the Automation Server of an up comingoccurs day-ahead). 2. The Automation Server posts two pieces

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

198

Emotionally aware automated portrait painting  

Science Journals Connector (OSTI)

We combine a machine vision system that recognises emotions and a non-photorealistic rendering (NPR) system to automatically produce portraits which heighten the emotion of the sitter. To do this, the vision system analyses a short video clip of a person ... Keywords: affective computing, artificial creativity, automatic facial expression recognition, computational creativity, emotion detection, machine vision, non-photorealistic rendering

Simon Colton; Michel F. Valstar; Maja Pantic

2008-09-01T23:59:59.000Z

199

Substantially Parallel Flux Uncluttered Rotor Machines (U-Machine...  

NLE Websites -- All DOE Office Websites (Extended Search)

brushless adjustable field excitation for high starting torque, field weakening, and power factor improvement and novel locks for higher peak speed. This novel machine shows...

200

Open Automated Demand Response for Small Commerical Buildings  

E-Print Network (OSTI)

of Fully Automated Demand  Response in Large Facilities.  Fully Automated Demand Response Tests in Large Facilities.  Open Automated  Demand Response Communication Standards: 

Dudley, June Han

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Scenarios for Consuming Standardized Automated Demand Response Signals  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large Facilities.Fully Automated Demand Response Tests in Large Facilities.Interoperable Automated Demand Response Infrastructure.

Koch, Ed

2009-01-01T23:59:59.000Z

202

Automation World Features New White Paper on Wireless Security...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automation World Features New White Paper on Wireless Security Automation World Features New White Paper on Wireless Security The April 2009 issue of Automation World magazine...

203

Extremal asymmetric universal cloning machines  

E-Print Network (OSTI)

The trade-offs among various output fidelities of asymmetric universal cloning machines are investigated. First we find out all the attainable optimal output fidelities for the 1 to 3 asymmetric universal cloning machine and it turns out that there are two kinds of extremal asymmetric cloning machines which have to cooperate in order to achieve some of the optimal output fidelities. Second we construct a family of extremal cloning machines that includes the universal symmetric cloning machine as well as an asymmetric 1 to $1+N$ cloning machine for qudits with two different output fidelities such that the optimal trade-off between the measurement disturbance and state estimation is attained in the limit of infinite $N$.

Mingming Jiang; Sixia Yu

2012-02-08T23:59:59.000Z

204

Design of Vitrification Machine  

E-Print Network (OSTI)

or fewer cryo-protectants, this is deemed to be an appropriate number of fluids for the machine to support. Parameters for the protocols will be input using a three-button and LCD interface. These features will allow lab technicians to vitrify or thaw... Interface Are the buttons placed to allow comfortable operation? Are the buttons’ functions clear or intuitive to the user? Do the buttons provide tactile feedback that is pleasing to the user? Is the LCD readout at a comfortable viewing angle? Is the LCD...

McDonald, Todd William

2009-11-30T23:59:59.000Z

205

Disciplined agility for process control & automation ; Disciplined agility for process control and automation .  

E-Print Network (OSTI)

??Process automation vendors must consider agility as a basis to gain a competitive edge in innovation. Process Automation systems can impact the operating cost of… (more)

Tibazarwa, Augustine

2009-01-01T23:59:59.000Z

206

Trust in automated systems the effect of automation level on trust calibration .  

E-Print Network (OSTI)

??Automated systems perform functions that were previously executed by a human. When using automation, the role of the human changes from operator to supervisor. For… (more)

Walliser, James C.

2011-01-01T23:59:59.000Z

207

Mysteries of 'molecular machines' revealed  

NLE Websites -- All DOE Office Websites (Extended Search)

companies and researchers to see the detailed inner workings of molecular machines. January 15, 2015 A picture of a membrane protein called cysZ determined with Phenix...

208

Steric and Electronic Effects Relating to the Cu2+ Jahn?Teller Distortion in Zn1-xCuxAl2O4 Spinels  

Science Journals Connector (OSTI)

Steric and Electronic Effects Relating to the Cu2+ Jahn?Teller Distortion in Zn1-xCuxAl2O4 Spinels§ ... XRD-data refinements on the whole solid solution have allowed defining two critical areas where structural features such as cell parameter and inversion rate as well as cation-oxygen bond distances in 8a and 16d sites of the spinel network exhibit clear unique variations. ...

A. Le Nestour; M. Gaudon; G. Villeneuve; R. Andriessen; A. Demourgues

2007-02-10T23:59:59.000Z

209

Time (hole?) machines John Byron Manchak  

E-Print Network (OSTI)

Time (hole?) machines John Byron Manchak Department of Philosophy, University of Washington, Box machines Hole machines Time travel General relativity a b s t r a c t Within the context of general relativity, we consider a type of "time machine" and introduce the related "hole machine". We review what

Manchak, John

210

Chapter 8 - Automation and Monitoring  

Science Journals Connector (OSTI)

This chapter begins with the topic of process automation which has the intent of making repetitive tasks more consistent, faster, and cheaper. As part of this discussion, we talk about how to determine if a process should be automated, how to document the process in preparation for automation, and how to perform the actual automation. A variety of scripting languages can be used to perform process automation and general best practices for scripting these processes is discussed as well as some thoughts on how to choose the right scripting language for the job. The second part of the chapter is all about monitoring of enterprise applications. Key performance indicators (KPIs) that give insight into the enterprise application’s performance over time as well as determining when to alert the enterprise applications administrator to potential problems within the application are discussed. Alerts are another important topic associated with enterprise application monitoring that is discussed including how to properly tune alerts through the selection of appropriate KPIs, retry counts, and retry intervals.

Jeremy Faircloth

2014-01-01T23:59:59.000Z

211

Two color machining of composites  

SciTech Connect

Quality cutting and drilling of 9 composite materials is possible using diode-pumped neodymium lasers. Machining at 1.06 {mu}m is improved by optimizing the pulse format of the diode-pumped neodymium lasers of the Precision Laser Machining (PLM) Consortium. Further improvements are obtained with the PLM lasers operating at 0.53 {mu}m.

Maher, W. [Boeing Defense & Space Group, Seattle, WA (United States)

1996-12-31T23:59:59.000Z

212

Finite State Machines Testing problems Conformance Testing Machine Identification FSM-Based Testing  

E-Print Network (OSTI)

Finite State Machines Testing problems Conformance Testing Machine Identification FSM-Based Testing Mousavi: FSM-Based Testing Part II #12;Finite State Machines Testing problems Conformance Testing Machine Identification Outline Finite State Machines Testing problems Conformance Testing Machine Identification Mousavi

Mousavi, Mohammad

213

Extremal quantum cloning machines  

E-Print Network (OSTI)

We investigate the problem of cloning a set of states that is invariant under the action of an irreducible group representation. We then characterize the cloners that are "extremal" in the convex set of group covariant cloning machines, among which one can restrict the search for optimal cloners. For a set of states that is invariant under the discrete Weyl-Heisenberg group, we show that all extremal cloners can be unitarily realized using the so-called "double-Bell states", whence providing a general proof of the popular ansatz used in the literature for finding optimal cloners in a variety of settings. Our result can also be generalized to continuous-variable optimal cloning in infinite dimensions, where the covariance group is the customary Weyl-Heisenberg group of displacements.

G. Chiribella; G. M. D'Ariano; P. Perinotti; N. J. Cerf

2005-07-14T23:59:59.000Z

214

Automated Demand Response Opportunities in Wastewater Treatment Facilities  

E-Print Network (OSTI)

Interoperable Automated Demand Response Infrastructure,study of automated demand response in wastewater treatmentopportunities for demand response control strategies in

Thompson, Lisa

2008-01-01T23:59:59.000Z

215

Automation in image cytometry : continuous HCS and kinetic image cytometry  

E-Print Network (OSTI)

OF CALIFORNIA, SAN DIEGO Automation in Image Cytometry:xiv Abstract of Dissertation Automation in Image Cytometry:

Charlot, David J.

2012-01-01T23:59:59.000Z

216

Automation of Fluorous Solid-Phase Extraction for Parallel Synthesis  

Science Journals Connector (OSTI)

Automation of Fluorous Solid-Phase Extraction for Parallel Synthesis ... • Cartridge conditioning, sample loading, elution, and rinsing are automated. ...

Wei Zhang; Yimin Lu

2006-10-17T23:59:59.000Z

217

Open Automated Demand Response for Small Commerical Buildings  

E-Print Network (OSTI)

communications.    Automated Logic Model  Vendor  Load Type of the HVAC.   Automated Logic Model  Vendor  Load Type 

Dudley, June Han

2009-01-01T23:59:59.000Z

218

Process Control and Automation: The Bagrit Vision  

Science Journals Connector (OSTI)

Automation, broadly defined as the computer-assisted control of industrial processes, covers a wide spectrum of applications. Here we need to narrow the spectrum somewhat, so as to focus on the word automation as...

Emeritus Professor Simon Lavington

2011-01-01T23:59:59.000Z

219

Microcomputer Applications in Power System Substation Automation  

Science Journals Connector (OSTI)

The object of this chapter is to describe power system applications of microcomputers, particularly in the area of power substation automation.The major functions required in substation automation are reviewed an...

C. T. Nguyen; R. Grondin; A. St-Jacques…

1983-01-01T23:59:59.000Z

220

Home Automation with ZigBee  

Science Journals Connector (OSTI)

This article discusses a topic of home automation, also called domotics, and provides an ... advantages provided by ZigBee wireless networking standard for home automation solutions. ZigBee protocol implementatio...

Maxim Osipov

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Disciplined agility for process control & automation  

E-Print Network (OSTI)

Process automation vendors must consider agility as a basis to gain a competitive edge in innovation. Process Automation systems can impact the operating cost of manufacturing equipment, the safe control of large quantities ...

Tibazarwa, Augustine

2009-01-01T23:59:59.000Z

222

Technical University of Denmark rsted DTU Automation  

E-Print Network (OSTI)

Technical University of Denmark �rsted · DTU Automation Project: SICAM - SIngle Conversion stage based SICAM using an LC-network Petar Ljusev, MSc., Ph.D. student, �rsted · DTU Automation e-mail: pl

223

Automated Operating Procedures for Transfer Limits  

E-Print Network (OSTI)

Automated Operating Procedures for Transfer Limits Final Project Report Power Systems Engineering · Illinois · Iowa State · Texas A&M · Washington State · Wisconsin Automated Operating Procedures

224

Automated Resoning in Modal Logics 0 (GENERAL PURPOSE) AUTOMATED REASONING IN MODAL LOGICS  

E-Print Network (OSTI)

Automated Resoning in Modal Logics 0 (GENERAL PURPOSE) AUTOMATED REASONING IN MODAL LOGICS BRANDEN FITELSON Department of Philosophy San Jos�e State University & Automated Reasoning Group.wisc.edu/fitelson BF @ AR @ MCS @ ANL & Philosophy @ SJSU May 16, 2002 Automated Resoning in Modal Logics 1

Fitelson, Branden

225

Automated Video-Based Fall Detection  

E-Print Network (OSTI)

home assistive monitoring uses technology such as sensors and cameras to aid live-alone aging persons, typically involving automation.

Edgcomb, Alex Daniel

2014-01-01T23:59:59.000Z

226

Machine Status | Argonne Leadership Computing Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

User Support User Support Machine Status Presentations Training & Outreach User Survey Machine Status Science on Mira Cores Core Hours Catalyst 65536 114771.01226563 Large scale...

227

Machine scheduling using the Bees algorithm.  

E-Print Network (OSTI)

??Single-machine scheduling is the process of assigning a group of jobs to a machine. The jobs are arranged so that a performance measure, such as… (more)

Phrueksanant, Janyarat

2013-01-01T23:59:59.000Z

228

Hilbert's machine and w-order  

E-Print Network (OSTI)

Hilbert's machine is a supertask machine inspired by Hilbert's Hotel whose functioning leads to a contradictory result involving w-ordering.

Antonio Leon

2006-08-14T23:59:59.000Z

229

Characterization of electrical discharge machining plasmas.  

E-Print Network (OSTI)

??Electrical Discharge Machining (EDM) is a well-known machining technique since more than fifty years. Its principle is to use the eroding effect on the electrodes… (more)

Descoeudres, Antoine

2006-01-01T23:59:59.000Z

230

Technical Report TRARP1695 Automated Reasoning Project  

E-Print Network (OSTI)

Technical Report TR­ARP­16­95 Automated Reasoning Project Research School of Information Sciences Heuerding Automated Institute for Applied Mathematics Reasoning Project and Computer Science ANU University that contains automated proof procedures based on modal Gentzen systems for numerous propositional (nonclassical

Goré, Rajeev

231

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS  

E-Print Network (OSTI)

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS: 2006 PROGRAM DESCRIPTION AND RESULTS) for development of the DR Automation Server System This project could not have been completed without extensive: Greg Watson and Mark Lott · C&C Building Automation: Mark Johnson and John Fiegel · Chabot Space

232

INTEGRATING AUTOMATION DESIGN INFORMATION WITH XML  

E-Print Network (OSTI)

INTEGRATING AUTOMATION DESIGN INFORMATION WITH XML Mika Viinikkala, Seppo Kuikka Institute of Automation and Control, Tampere University of Technology, P.O. Box 692, 33101 Tampere, Finland Email: mika.viinikkala@tut.fi, seppo.kuikka@tut.fi Keywords: Systems integration, XML, automation design Abstract: This paper presents

233

A DISTRIBUTED AUTOMATION SYSTEM FOR ELECTROPHYSICAL INSTALLATIONS  

E-Print Network (OSTI)

A DISTRIBUTED AUTOMATION SYSTEM FOR ELECTROPHYSICAL INSTALLATIONS V.R. Kozak Budker Institute There was designed a set of devices for automation systems of physical installations. On this basis approach. KEY WORDS Automation, systems, applications, CANBUS, embedded, controller. 1. Introduction Budker

Kozak, Victor R.

234

TAMPERE UNIVERSITY OF TECHNOLOGY DEPARTMENT OF AUTOMATION  

E-Print Network (OSTI)

TAMPERE UNIVERSITY OF TECHNOLOGY DEPARTMENT OF AUTOMATION An Intelligent Web Service for Operation 2004 Examiner: Prof. Seppo Kuikka #12;2 Abstract TAMPERE UNIVERSITY OF TECHNOLOGY Automation Degree Program Institute of Automation and Control Jaakkola, Veli-Pekka: An Intelligent Web Service for Operation

235

Automating Shallow Seismic Imaging  

SciTech Connect

This seven-year, shallow-seismic reflection research project had the aim of improving geophysical imaging of possible contaminant flow paths. Thousands of chemically contaminated sites exist in the United States, including at least 3,700 at Department of Energy (DOE) facilities. Imaging technologies such as shallow seismic reflection (SSR) and ground-penetrating radar (GPR) sometimes are capable of identifying geologic conditions that might indicate preferential contaminant-flow paths. Historically, SSR has been used very little at depths shallower than 30 m, and even more rarely at depths of 10 m or less. Conversely, GPR is rarely useful at depths greater than 10 m, especially in areas where clay or other electrically conductive materials are present near the surface. Efforts to image the cone of depression around a pumping well using seismic methods were only partially successful (for complete references of all research results, see the full Final Technical Report, DOE/ER/14826-F), but peripheral results included development of SSR methods for depths shallower than one meter, a depth range that had not been achieved before. Imaging at such shallow depths, however, requires geophone intervals of the order of 10 cm or less, which makes such surveys very expensive in terms of human time and effort. We also showed that SSR and GPR could be used in a complementary fashion to image the same volume of earth at very shallow depths. The primary research focus of the second three-year period of funding was to develop and demonstrate an automated method of conducting two-dimensional (2D) shallow-seismic surveys with the goal of saving time, effort, and money. Tests involving the second generation of the hydraulic geophone-planting device dubbed the ''Autojuggie'' showed that large numbers of geophones can be placed quickly and automatically and can acquire high-quality data, although not under rough topographic conditions. In some easy-access environments, this device could make SSR surveying considerably more efficient and less expensive, particularly when geophone intervals of 25 cm or less are required. The most recent research analyzed the difference in seismic response of the geophones with variable geophone spike length and geophones attached to various steel media. Experiments investigated the azimuthal dependence of the quality of data relative to the orientation of the rigidly attached geophones. Other experiments designed to test the hypothesis that the data are being amplified in much the same way that an organ pipe amplifies sound have so far proved inconclusive. Taken together, the positive results show that SSR imaging within a few meters of the earth's surface is possible if the geology is suitable, that SSR imaging can complement GPR imaging, and that SSR imaging could be made significantly more cost effective, at least in areas where the topography and the geology are favorable. Increased knowledge of the Earth's shallow subsurface through non-intrusive techniques is of potential benefit to management of DOE facilities. Among the most significant problems facing hydrologists today is the delineation of preferential permeability paths in sufficient detail to make a quantitative analysis possible. Aquifer systems dominated by fracture flow have a reputation of being particularly difficult to characterize and model. At chemically contaminated sites, including U.S. Department of Energy (DOE) facilities and others at Department of Defense (DOD) installations worldwide, establishing the spatial extent of the contamination, along with the fate of the contaminants and their transport-flow directions, is essential to the development of effective cleanup strategies. Detailed characterization of the shallow subsurface is important not only in environmental, groundwater, and geotechnical engineering applications, but also in neotectonics, mining geology, and the analysis of petroleum reservoir analogs. Near-surface seismology is in the vanguard of non-intrusive approaches to increase knowledge of the shallow subsurface; our

Steeples, Don W.

2004-12-09T23:59:59.000Z

236

Slide system for machine tools  

DOE Patents (OSTI)

The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

Douglass, S.S.; Green, W.L.

1980-06-12T23:59:59.000Z

237

Slide system for machine tools  

DOE Patents (OSTI)

The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

Douglass, Spivey S. (Oak Ridge, TN); Green, Walter L. (Knoxville, TN)

1982-01-01T23:59:59.000Z

238

Chapter 13 - Commercial Building Automation  

Science Journals Connector (OSTI)

A Building Automation System (BAS) is a computerized, intelligent system that controls and measures lighting, climate, security, and other mechanical and electrical systems in a building. The purpose of a BAS is typically to reduce energy and maintenance costs, as well as to increase control, comfort, reliability, and ease of use for maintenance staff and tenants.

Jan Höller; Vlasios Tsiatsis; Catherine Mulligan; Stamatis Karnouskos; Stefan Avesand; David Boyle

2014-01-01T23:59:59.000Z

239

Automated computation meets hot QCD  

E-Print Network (OSTI)

We give a short review on recent progress in the field of automated calculations in finite-temperature field theory, where integration-by-parts techniques have proven (almost) as useful as in the zero-temperature case. Furthermore, we provide one concrete example of an evaluation of a new three-loop master sum-integral that exhibits maximal divergence.

Ioan Ghisoiu; York Schroder

2012-10-19T23:59:59.000Z

240

ALMS: Automated logic mapping system  

Science Journals Connector (OSTI)

ALMS is a set of design automation computer programs which accepts as input a description of a logic design, specifications of modules (e.g., chips, cards, etc.) into which the blocks of the design are to be partitioned or mapped, and some constraints ...

R. L. Russo; P. K. Wolff, Sr.

1971-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

The Economics of Information Security  

Science Journals Connector (OSTI)

...away with claiming that their automated teller machine (ATM) system...early adoption gives way to rapid deployment once the number...in turn provides tools for modeling and investigating such networks...replace them. Using multiround simulations to study how attack and defense...

Ross Anderson; Tyler Moore

2006-10-27T23:59:59.000Z

242

Rockwell Automation - Owens Corning Teaming Profile  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation Owens Corning Rockwell Automation Owens Corning 1201 S. Second Street 247 York Road Milwaukee, WI 53204 Guelph, Ontario N1E 3G4 Business: Industrial Automation Business: Textile / Fiber Nigel Hitchings Frank Peel Marketing Manager Electrical Support Specialist Phone: 508-357-8404 Phone: 519-823-7208 Email: nehitchings@ra.rockwell.com Email: frank.peel@owenscorning.com Owens Corning partners with Rockwell Automation to retrofit fans with VFDs, saving $67,000 annually Project Scope Owens Corning and Rockwell Automation installed Variable Frequency Drives (VFDs) on one 125HP cooling fan and three 40HP recirculation fans at the Owens Corning Guelph Glass Plant. The VFDs were integrated with the existing Rockwell Automation programmable automation controller to collect

243

CNC Oxyfuel gas cutting machine  

Science Journals Connector (OSTI)

In today's era of plasma and laser cutting, machines using oxy-acetylene flame are still meritorious due to simplicity and cost effectiveness. Demand for metal cutting with good quality as regarding to edge quality, circularity, formation of redeposit ...

Snehal Gawali; Nilesh Gawali

2010-02-01T23:59:59.000Z

244

A compact molecular beam machine  

SciTech Connect

We have developed a compact, low cost, modular, crossed molecular beam machine. The new apparatus utilizes several technological advancements in molecular beams valves, ion detection, and vacuum pumping to reduce the size, cost, and complexity of a molecular beam apparatus. We apply these simplifications to construct a linear molecular beam machine as well as a crossed-atomic and molecular beam machine. The new apparatus measures almost 50 cm in length, with a total laboratory footprint less than 0.25 m{sup 2} for the crossed-atomic and molecular beam machine. We demonstrate the performance of the apparatus by measuring the rotational temperature of nitric oxide from three common molecular beam valves and by observing collisional energy transfer in nitric oxide from a collision with argon.

Jansen, Paul [Vrije Universiteit, 1081 HV Amsterdam (Netherlands); Chandler, David W.; Strecker, Kevin E. [Sandia National Laboratories, Livermore, California 94551 (United States)

2009-08-15T23:59:59.000Z

245

Diamond turning machine controller implementation  

SciTech Connect

The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

1988-12-01T23:59:59.000Z

246

Time Machine at the LHC  

E-Print Network (OSTI)

Recently, black hole and brane production at CERN's Large Hadron Collider (LHC) has been widely discussed. We suggest that there is a possibility to test causality at the LHC. We argue that if the scale of quantum gravity is of the order of few TeVs, proton-proton collisions at the LHC could lead to the formation of time machines (spacetime regions with closed timelike curves) which violate causality. One model for the time machine is a traversable wormhole. We argue that the traversable wormhole production cross section at the LHC is of the same order as the cross section for the black hole production. Traversable wormholes assume violation of the null energy condition (NEC) and an exotic matter similar to the dark energy is required. Decay of the wormholes/time machines and signatures of time machine events at the LHC are discussed.

I. Ya. Aref'eva; I. V. Volovich

2007-10-15T23:59:59.000Z

247

Machine Learning ! ! ! ! ! Srihari Ising Models, Boltzmann  

E-Print Network (OSTI)

Machine Learning ! ! ! ! ! Srihari 1 Ising Models, Boltzmann Machines, Deep Belief Networks Sargur Srihari srihari@cedar.buffalo.edu #12;Machine Learning ! ! ! ! ! Srihari Topics · Ising Model · Boltzmann · Metric MRF 2 #12;Machine Learning ! ! ! ! ! Srihari Ising Model · Earliest Markov network model

248

Standard Operating Procedure (SOP) -Milling Machine  

E-Print Network (OSTI)

Standard Operating Procedure (SOP) - Milling Machine · Keep all guards in place while operating the machine. · While operating the milling machine allow no one else to touch it. · Keep hands away from moving cutting tools. · Do not make measurements of the stock while the milling machine is powered. · Do

Veiga, Pedro Manuel Barbosa

249

pdf version of the entry Time Machines  

E-Print Network (OSTI)

pdf version of the entry Time Machines http://plato.stanford.edu/archives/win2010/entries/time-machine, Stanford, CA 94305 Time Machines Copyright c 2010 by the authors John Earman and Christian W¨uthrich All rights reserved. Copyright policy: https://leibniz.stanford.edu/friends/info/copyright/ Time Machines

Wüthrich, Christian

250

Optimization Online - Optimal Design of Electrical Machines ...  

E-Print Network (OSTI)

Jun 8, 2011 ... Optimal Design of Electrical Machines: Mathematical Programming ... Science and Engineering (Multidisciplinary Design Optimization ).

Sonia Cafieri

2011-06-08T23:59:59.000Z

251

Optimization Algorithms in Machine Learning Stephen Wright  

E-Print Network (OSTI)

Optimization Algorithms in Machine Learning Stephen Wright University of Wisconsin-Madison NIPS Tutorial, 6 Dec 2010 Stephen Wright (UW-Madison) Optimization in Machine Learning NIPS Tutorial, 6 Dec 2010 in machine learning. Stephen Wright (UW-Madison) Optimization in Machine Learning NIPS Tutorial, 6 Dec 2010 2

Wright, Steve

252

Jahn-Teller Phonon Anomaly and Dynamic Phase Fluctuations in La{sub 0.7}Ca{sub 0.3}MnO{sub 3}  

SciTech Connect

Inelastic neutron scattering was used to study the temperature (T) dependence of the lattice excitations in La{sub 0.7}Ca {sub 0.3}MnO {sub 3} . An optical Jahn-Teller phonon exhibits continuous but anomalous damping with increasing temperature in the ferromagnetic-metallic phase and collapses above the Curie temperature T{sub C} (240K). We attribute this anomaly to the growing dynamic phase segregation as T{yields}T{sub C} , thus providing evidence of local fluctuations associated with the short-range polaron or charge/orbital ordering in the ferromagnetic-metallic state.

Zhang, Jiandi; Dai, Pengcheng; Fernandez-Baca, J. A.; Plummer, E. W.; Tomioka, Y.; Tokura, Y.

2001-04-23T23:59:59.000Z

253

Automated Export Control.PDF  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 I N S P E C T I O N R E P O R T U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF INSPECTIONS INSPECTION OF THE DEPARTMENT OF ENERGY'S AUTOMATED EXPORT CONTROL SYSTEM DECEMBER 2001 U.S. DEPARTMENT OF ENERGY Washington, DC 20585 December 7, 2001 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman /s/ Inspector General SUBJECT: INFORMATION: Report on "Inspection of the Department of Energy's Automated Export Control System" BACKGROUND The National Defense Authorization Act for Fiscal Year 2000 (NDAA for FY 2000) contained a provision that not later than March 30 of each year the President will submit to Congress, beginning in the year 2000 and ending in the year 2007, an annual report on the Government's policies and procedures with respect to the export of technologies and technical information with

254

Automated Transportation Management System (ATMS)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Re evised June 2010 Re evised June 2010 Autom The Depa Transport an integra system al outbound air. Its ea 1989 DOE significant operationa commerce electronic rates, pre transporta users eva shipments opportunit logistics im ATMS is i radioactiv shipments System ATMS is a activities p packaging including materials. common s lading, fre * W * C S * A * H * E * * O 0 mated T artment of Ene tation Manage ated web-base lowing users freight shipm arly developm E Inspector G t opportunitie al efficiency t e. Today's sy cally prepare s pare shipping ation bills befo aluate carrier s, and use co ties for system mprovements ts capability t ve and other h s in a comple Modules a modular sys performed by g and transpo radioactive a . Its modules shipment info eight bills, rate System Web Applic Carrier Eval Selection Automated

255

Automated Demand Response and Commissioning  

SciTech Connect

This paper describes the results from the second season of research to develop and evaluate the performance of new Automated Demand Response (Auto-DR) hardware and software technology in large facilities. Demand Response (DR) is a set of activities to reduce or shift electricity use to improve the electric grid reliability and manage electricity costs. Fully-Automated Demand Response does not involve human intervention, but is initiated at a home, building, or facility through receipt of an external communications signal. We refer to this as Auto-DR. The evaluation of the control and communications must be properly configured and pass through a set of test stages: Readiness, Approval, Price Client/Price Server Communication, Internet Gateway/Internet Relay Communication, Control of Equipment, and DR Shed Effectiveness. New commissioning tests are needed for such systems to improve connecting demand responsive building systems to the electric grid demand response systems.

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-04-01T23:59:59.000Z

256

Convection automated logic oven control  

SciTech Connect

For the past few years, there has been a greater push to bring more automation to the cooling process. There have been attempts at automated cooking using a wide range of sensors and procedures, but with limited success. The authors have the answer to the automated cooking process; this patented technology is called Convection AutoLogic (CAL). The beauty of the technology is that it requires no extra hardware for the existing oven system. They use the existing temperature probe, whether it is an RTD, thermocouple, or thermistor. This means that the manufacturer does not have to be burdened with extra costs associated with automated cooking in comparison to standard ovens. The only change to the oven is the program in the central processing unit (CPU) on the board. As for its operation, when the user places the food into the oven, he or she is required to select a category (e.g., beef, poultry, or casseroles) and then simply press the start button. The CAL program then begins its cooking program. It first looks at the ambient oven temperature to see if it is a cold, warm, or hot start. CAL stores this data and then begins to look at the food`s thermal footprint. After CAL has properly detected this thermal footprint, it can calculate the time and temperature at which the food needs to be cooked. CAL then sets up these factors for the cooking stage of the program and, when the food has finished cooking, the oven is turned off automatically. The total time for this entire process is the same as the standard cooking time the user would normally set. The CAL program can also compensate for varying line voltages and detect when the oven door is opened. With all of these varying factors being monitored, CAL can produce a perfectly cooked item with minimal user input.

Boyer, M.A.; Eke, K.I. [Apollo U.S.A. Inc., Orlando, FL (United States)] [Apollo U.S.A. Inc., Orlando, FL (United States)

1998-03-01T23:59:59.000Z

257

Applying Machine Learning to Catalogue Matching in Astrophysics  

E-Print Network (OSTI)

We present the results of applying automated machine learning techniques to the problem of matching different object catalogues in astrophysics. In this study we take two partially matched catalogues where one of the two catalogues has a large positional uncertainty. The two catalogues we used here were taken from the HI Parkes All Sky Survey (HIPASS), and SuperCOSMOS optical survey. Previous work had matched 44% (1887 objects) of HIPASS to the SuperCOSMOS catalogue. A supervised learning algorithm was then applied to construct a model of the matched portion of our catalogue. Validation of the model shows that we achieved a good classification performance (99.12% correct). Applying this model, to the unmatched portion of the catalogue found 1209 new matches. This increases the catalogue size from 1887 matched objects to 3096. The combination of these procedures yields a catalogue that is 72% matched.

D J Rohde; M J Drinkwater; M R Gallagher; T Downs; M T Doyle

2005-04-01T23:59:59.000Z

258

Integration of automation design information using XML technologies  

E-Print Network (OSTI)

Integration of automation design information using XML technologies Master of Science Thesis Mika UNIVERSITY OF TECHNOLOGY DEPARTMENT OF AUTOMATION #12;2 Abstract TAMPERE UNIVERSITY OF TECHNOLOGY Automation Degree Program Institute of Automation and Control Viinikkala, Mika: Integration of automation design

259

Building simulation approaches for the training of automated data analysis tools in building energy management  

Science Journals Connector (OSTI)

Abstract The field of building energy management, which monitors and analyses the energy use of buildings with the aim to control and reduce energy expenditure, is seeing a rapid evolution. Automated meter reading approaches, harvesting data at hourly or even half-hourly intervals, create a large pool of data which needs analysis. Computer analysis by means of machine learning techniques allows automated processing of this data, invoking expert analysis where anomalies are detected. However, machine learning always requires a historical dataset to train models and develop a benchmark to define what constitutes an anomaly. Computer analysis by means of building performance simulation employs physical principles to predict energy behaviour, and allows the assessment of the behaviour of buildings from a pure modelling background. This paper explores how building simulation approaches can be fused into energy management practice, especially with a view to the production of artificial bespoke benchmarks where historical profiles are not available. A real accommodation block, which is subject to monitoring, is used to gather an estimation of the accuracy of this approach. The findings show that machine learning from simulation models has a high internal accuracy; comparison with actual metering data shows prediction errors in the system (20%) but still achieves a substantial improvement over industry benchmark values.

Pieter de Wilde; Carlos Martinez-Ortiz; Darren Pearson; Ian Beynon; Martin Beck; Nigel Barlow

2013-01-01T23:59:59.000Z

260

Definition: Distribution Automation Communications Network | Open Energy  

Open Energy Info (EERE)

Automation Communications Network Automation Communications Network Jump to: navigation, search Dictionary.png Distribution Automation Communications Network A communications network or networks designed to deliver control signals and information between distribution automation devices, and between these devices and utility grid control systems. These networks can utilize wired or wireless connections, and can be utility-owned or provided as services by a third party.[1] Related Terms distribution automation References ↑ https://www.smartgrid.gov/category/technology/distribution_automation_communications_network [[C LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ategory: Smart Grid Definitionssmart grid,smart grid, |Template:BASEPAGENAME]]smart grid,smart grid, Retrieved from

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Mobile home automation: merging mobile value added services and home automation technologies  

Science Journals Connector (OSTI)

In this paper we study mobile home automation, a field that emerges from an integration of mobile application platforms and home automation technologies. We motivate our research and provide ... options of how he...

Goetz Botterweck; J. Felix Hampe…

2009-06-01T23:59:59.000Z

262

Minimal universal quantum heat machine  

E-Print Network (OSTI)

In traditional thermodynamics the Carnot cycle yields the ideal performance bound of heat engines and refrigerators. We propose and analyze a minimal model of a heat machine that can play a similar role in quantum regimes. The minimal model consists of a single two-level system with periodically modulated energy splitting that is permanently, weakly, coupled to two spectrally-separated heat baths at different temperatures. The equation of motion allows to compute the stationary power and heat currents in the machine consistently with the second-law of thermodynamics. This dual-purpose machine can act as either an engine or a refrigerator (heat pump) depending on the modulation rate. In both modes of operation the maximal Carnot efficiency is reached at zero power. We study the conditions for finite-time optimal performance for several variants of the model. Possible realizations of the model are discussed.

David Gelbwaser-Klimovsky; Robert Alicki; Gershon Kurizki

2012-09-06T23:59:59.000Z

263

Alpha Channeling in Mirror Machines  

SciTech Connect

Because of their engineering simplicity, high-?, and steady-state operation, mirror machines and related open-trap machines such as gas dynamic traps, are an attractive concept for achieving controlled nuclear fusion. In these open-trap machines, the confinement occurs by means of magnetic mirroring, without the magnetic field lines closing upon themselves within the region of particle confinement. Unfortunately, these concepts have not achieved to date very spectacular laboratory results, and their reactor prospects are dimmed by the prospect of a low Q-factor, the ratio of fusion power produced to auxiliary power. Nonetheless, because of its engineering promise, over the years numerous improvements have been proposed to enhance the reactor prospects of mirror fusion, such as tandem designs, end-plugging, and electric potential barriers.

Fisch N.J.

2005-10-19T23:59:59.000Z

264

Automated Surface Observing System: Standby Power Options  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Automated Surface Observing System Standby Options Power Automated Surface Observing System (ASOS) General System Description * Self contained group of sensors and data gathering equipment that produces an automated weather observation * Weather observations support aviation, climate data, non government weather operations, public consumption, etc. * Initial deployment began in 1991 and continued through 1997 * Located at 884 sites nationwide, normally at airports * System has two distinct subsystems: Field installed equipment (DCP & Sensor Group) and an indoor processor (ACU) with peripherals * Separate facility power for DCP & Sensors and ACU 1 * measure and collect data * Located on the airport * back up group for 10 minutes * Currently pl

265

An Automated Raman Device for Gout Diagnosis  

Science Journals Connector (OSTI)

This study reports an automated Raman device to identify crystals in synovial aspirates from patients with gout symptoms. Combined with sample preparation, the device could diagnose...

Li, Bolan

266

Distributed Automated Demand Response - Energy Innovation Portal  

NLE Websites -- All DOE Office Websites (Extended Search)

Transmission Find More Like This Return to Search Distributed Automated Demand Response Lawrence Livermore National Laboratory Contact LLNL About This Technology...

267

Substation automation gains momentum with modern options  

SciTech Connect

This paper discusses issues associated with utility substation automation. Monitoring equipment for monitoring power flow, quality, and harmonics for three substations simultaneously is described.

Beaty, W.

1996-12-01T23:59:59.000Z

268

Automated Logic Restructuring with aSPFDs  

Science Journals Connector (OSTI)

This chapter presents a comprehensive methodology to automate logic restructuring in combinational and sequential circuits. This technique algorithmically constructs the required transformation by utilizing a ...

Yu-Shen Yang; Subarna Sinha; Andreas Veneris…

2011-01-01T23:59:59.000Z

269

Automated Transportation Management System (ATMS) | Department...  

Office of Environmental Management (EM)

of Energy's (DOE's) Automated Transportation Management System is an integrated web-based logistics management system allowing users to manage inbound and outbound freight...

270

Recommendation 207 : Automate the Stewardship Verification Process...  

Office of Environmental Management (EM)

recommends exploring ways to automate the stewardship tracking process and establish a web-based solution for managing long-term stewardship information for the Oak Ridge...

271

Chapter 38, Design Automation for Microelectronics, Springer Handbook of Automation Deming Chen  

E-Print Network (OSTI)

Chapter 38, Design Automation for Microelectronics, Springer Handbook of Automation Deming Chen of hardware and software systems in the past several decades. CAD techniques are the key driving forces behind techniques. In this chapter we will introduce the fundamentals of design automation as an engineering field

Chen, Deming

272

Mobile machine hazardous working zone warning system  

DOE Patents (OSTI)

A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine. 3 figs.

Schiffbauer, W.H.; Ganoe, C.W.

1999-08-17T23:59:59.000Z

273

Mobile machine hazardous working zone warning system  

DOE Patents (OSTI)

A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation thereof. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine.

Schiffbauer, William H. (Connellsville, PA); Ganoe, Carl W. (Pittsburgh, PA)

1999-01-01T23:59:59.000Z

274

Cooling system for rotating machine  

DOE Patents (OSTI)

An electrical machine comprising a rotor is presented. The electrical machine includes the rotor disposed on a rotatable shaft and defining a plurality of radial protrusions extending from the shaft up to a periphery of the rotor. The radial protrusions having cavities define a fluid path. A stationary shaft is disposed concentrically within the rotatable shaft wherein an annular space is formed between the stationary and rotatable shaft. A plurality of magnetic segments is disposed on the radial protrusions and the fluid path from within the stationary shaft into the annular space and extending through the cavities within the radial protrusions.

Gerstler, William Dwight (Niskayuna, NY); El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Lokhandwalla, Murtuza (Clifton Park, NY); Alexander, James Pellegrino (Ballston Lake, NY); Quirion, Owen Scott (Clifton Park, NY); Palafox, Pepe (Schenectady, NY); Shen, Xiaochun (Schenectady, NY); Salasoo, Lembit (Schenectady, NY)

2011-08-09T23:59:59.000Z

275

CRAD, Machine Shop Safe Operations Assessment Plan | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Machine Shop Safe Operations Assessment Plan CRAD, Machine Shop Safe Operations Assessment Plan Performance Objective: The purpose of this assessment is to verify that machine shop...

276

Machine Tool Design and Operation Strategies for Green Manufacturing  

E-Print Network (OSTI)

Power Demand of Precision Machine Tools, MS Thesis, Dept.Environmental Burden for Machine Tool Operation, JSME Int.of Downsized Design for Machine Tools on the Environmental

2010-01-01T23:59:59.000Z

277

Machine Learning for Humanoid Robot Modeling and Control /  

E-Print Network (OSTI)

Face . . . . . . . . . . . 1.2 Machine Learning ApproachesInternational Conference on Machine Learning (ICML), 2011. [hands. ICRA 2013, 2013. [40] Machine Perception Laboratory.

Wu, Tingfan

2013-01-01T23:59:59.000Z

278

Parallel machine match-up scheduling with manufacturing cost considerations  

E-Print Network (OSTI)

approach for the single machine scheduling problem. Journaldecisions on parallel CNC machines: -constraint approach.mechanism for the CNC machine scheduling problems with

Aktürk, M. Selim; Atamtürk, Alper; Gürel, Sinan

2010-01-01T23:59:59.000Z

279

Rage against the machines: how subjects play against learning algorithms  

E-Print Network (OSTI)

B. : Rage against the machines—How Subjects Learn to PlayARTICLE Rage against the machines: how subjects play againsterror. Rage against the machines representative of real

Duersch, Peter; Kolb, Albert; Oechssler, Jörg; Schipper, Burkhard C.

2010-01-01T23:59:59.000Z

280

Automating Logical Preservation for Small Institutions with Hoppla  

E-Print Network (OSTI)

Automating Logical Preservation for Small Institutions with Hoppla Stephan Strodl, Petar Petrov and outsources digital preservation expertise. This paper presents the automated logical preservation process of automating logical preservation by outsourcing expertise. 1 Introduction Digital information form essential

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Automated solar cell assembly teamed process research. Semiannual subcontract report, December 6, 1993--June 30, 1994  

SciTech Connect

This is the second Semiannual Technical Progress Report for the program titled `Automated Solar Cell Assembly Teamed Process Research` funded under National Renewable Energy Laboratory (NREL) subcontract No. ZAG-3-11219-01. This report describes the work done on Phase II of the program in the period from December 6, 1993 to June 30, 1994. Spire`s objective in this program is to develop high throughput (5 MW/yr) automated processes for interconnecting thin (200 {mu}m) silicon solar cells. High yield will be achieved with these fragile cells through the development of low mechanical stress and low thermal stress processes. For example, a machine vision system is being developed for cell alignment without mechanically contacting the cell edges, while a new soldering process is being developed to solder metal interconnect ribbons simultaneously to a cells` front and back contacts, eliminating one of the two heating steps normally used for soldering each cell.

Nowlan, M. [Spire Corp., Bedford, MA (United States)

1995-01-01T23:59:59.000Z

282

Simulations of Quantum Turing Machines by Quantum Multi-Stack Machines  

E-Print Network (OSTI)

As was well known, in classical computation, Turing machines, circuits, multi-stack machines, and multi-counter machines are equivalent, that is, they can simulate each other in polynomial time. In quantum computation, Yao [11] first proved that for any quantum Turing machines $M$, there exists quantum Boolean circuit $(n,t)$-simulating $M$, where $n$ denotes the length of input strings, and $t$ is the number of move steps before machine stopping. However, the simulations of quantum Turing machines by quantum multi-stack machines and quantum multi-counter machines have not been considered, and quantum multi-stack machines have not been established, either. Though quantum counter machines were dealt with by Kravtsev [6] and Yamasaki {\\it et al.} [10], in which the machines count with $0,\\pm 1$ only, we sense that it is difficult to simulate quantum Turing machines in terms of this fashion of quantum computing devices, and we therefore prove that the quantum multi-counter machines allowed to count with $0,\\pm 1,\\pm 2,...,\\pm n$ for some $n>1$ can efficiently simulate quantum Turing machines. Therefore, our mail goals are to establish quantum multi-stack machines and quantum multi-counter machines with counts $0,\\pm 1,\\pm 2,...,\\pm n$ and $n>1$, and particularly to simulate quantum Turing machines by these quantum computing devices.

Daowen Qiu

2005-06-06T23:59:59.000Z

283

Automated Critical Peak Pricing Field Tests: 2006 Pilot Program Description and Results  

E-Print Network (OSTI)

Target Hayward Software client Automated Logic TargetAntioch Automated Logic Target Bakersfield Software client

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila

2007-01-01T23:59:59.000Z

284

Machine translation of Arabic dialects  

Science Journals Connector (OSTI)

Arabic Dialects present many challenges for machine translation, not least of which is the lack of data resources. We use crowdsourcing to cheaply and quickly build Levantine-English and Egyptian-English parallel corpora, consisting of 1.1M words and ...

Rabih Zbib; Erika Malchiodi; Jacob Devlin; David Stallard; Spyros Matsoukas; Richard Schwartz; John Makhoul; Omar F. Zaidan; Chris Callison-Burch

2012-06-01T23:59:59.000Z

285

Description of the Scenario Machine  

E-Print Network (OSTI)

We present here an updated description of the "Scenario Machine" code. This tool is used to carry out a population synthesis of binary stars. Previous version of the description can be found at http://xray.sai.msu.ru/~mystery//articles/review/contents.html

V. M. Lipunov; K. A. Postnov; M. E. Prokhorov; A. I. Bogomazov

2007-04-11T23:59:59.000Z

286

Polar Warnings A Lifelike Machine  

E-Print Network (OSTI)

States conducted its last underground nuclear test in 1992 and turned to Los Alamos and the other weapons Certification without Testing LOS ALAMOS DELIVERS THE FIRST NUCLEAR TRIGGER IN 20 YEARS A Lifelike Machine laboratories for a new approach to ensuring the continued safety and reliability of its nuclear deterrent

287

Energy Conservation Within the Paper Machine Room  

E-Print Network (OSTI)

their startling waste of energy, the corrective measures taken to reduce this waste of energy, the potential for waste recovery and equipment available for waste heat recovery. Areas under study include the press section, paper machine dryer section, and machine...

Walker, P. J.; Erskine, K. J.

1979-01-01T23:59:59.000Z

288

Open Automated Demand Response Communications Specification (Version 1.0)  

E-Print Network (OSTI)

and Techniques for Demand Response. May 2007. LBNL-59975.to facilitate automating  demand response actions at the Interoperable Automated Demand Response Infrastructure,

Piette, Mary Ann

2009-01-01T23:59:59.000Z

289

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

E-Print Network (OSTI)

Goodin. 2009. “Open Automated Demand Response Communicationsin Demand Response for Wholesale Ancillary Services. ” InOpen Automated Demand Response Demonstration Project. LBNL-

Ghatikar, Girish

2010-01-01T23:59:59.000Z

290

Home Automation : Smart home technology and template house design.  

E-Print Network (OSTI)

??In this thesis, home automation’s general knowledge, technology information and each component will be introduced to the reader in the first half of the whole… (more)

Zheng, Zeya

2013-01-01T23:59:59.000Z

291

V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013...

292

U-047: Siemens Automation License Manager Bugs Let Remote Users...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary Code U-047: Siemens Automation License Manager Bugs Let Remote Users Deny Service or...

293

Appropriate automation of rail signalling systems: a human factors study.  

E-Print Network (OSTI)

??This thesis examines the effect of automation in the rail signalling environment. The level of automation in a system can be described as ranging along… (more)

Balfe, Nora

2010-01-01T23:59:59.000Z

294

Automation of amperometric titrations with rotating platinum electrodes  

Science Journals Connector (OSTI)

Automation of amperometric titrations with rotating platinum electrodes ... A modification of an earlier described apparatus allows for the automation of amperometric titrations with rotating platinum electrodes. ...

Eugene D. Olsen; Roger D. Walton

1966-01-01T23:59:59.000Z

295

V-132: IBM Tivoli System Automation Application Manager Multiple...  

Energy Savers (EERE)

32: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 -...

296

ISA Approves Standard for Wireless Automation in Process Control...  

NLE Websites -- All DOE Office Websites (Extended Search)

ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the...

297

Small- and Medium-Size Building Automation and Control System...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Emerging...

298

Demand Response and Open Automated Demand Response  

E-Print Network (OSTI)

LBNL-3047E Demand Response and Open Automated Demand Response Opportunities for Data Centers G described in this report was coordinated by the Demand Response Research Center and funded by the California. Demand Response and Open Automated Demand Response Opportunities for Data Centers. California Energy

299

Atlas Sodium Automated Batch Synthesis System  

E-Print Network (OSTI)

Atlas Sodium Automated Batch Synthesis System (Syrris) June 2013 #12;Introduction to the system · The Atlas Sodium system consists of an Atlas base equipped with a 400ºC hotplate, a stacking dry bath systemL) for automated addition and/or removal of solution. · The system is computer controlled by the Atlas software

Subramanian, Venkat

300

PeopleSoft HR ECR Automation Process  

E-Print Network (OSTI)

PeopleSoft HR ECR Automation Process Short Term Disability with Pay May 2011 #12;Processing a Short Term Disability with Pay ECR Search Page To process a Short Term Disability using the automated ECR process, follow the menu navigation below: Home > Employee Change Request (ECR) > Use > ECR Create

Huang, Jianyu

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

PeopleSoft HR ECR Automation Process  

E-Print Network (OSTI)

PeopleSoft HR ECR Automation Process Revise Existing SWB May 2011 #12;Processing a Short Work Break Date Revision ECR Search Page To process a Short Work Break Date revision using the automated ECR process, follow the menu navigation below: Home > Employee Change Request (ECR) > Use > ECR Create

Huang, Jianyu

302

PeopleSoft HR ECR Automation Process  

E-Print Network (OSTI)

PeopleSoft HR ECR Automation Process Employee Work Hours Change (Temporary Basis) May 2012 #12 Documentation May, 2012 When the Originator is ready to create an Hours Change Request using the automated ECR the instructions below: - Home > Employee Change Request (ECR) > Use > ECR Create · If you know the Name or Eagle

Huang, Jianyu

303

PeopleSoft HR ECR Automation Process  

E-Print Network (OSTI)

PeopleSoft HR ECR Automation Process Long Term Disability May 2011 #12;Processing a Long Term Disability LTD ECR Search Page To process an LTD transaction using the automated ECR process, follow the menu navigation below: Home > Employee Change Request (ECR) > Use > ECR Create 2 · If you know the Name or Eagle

Huang, Jianyu

304

PeopleSoft HR ECR Automation Process  

E-Print Network (OSTI)

PeopleSoft HR ECR Automation Process Leave of Absence May 2012 #12;2 Table of Contents Create the Originator is ready to create a Leave of Absence using the automated ECR process, he/she will follow the menu navigation below to access the employee search page and then use the instructions below: - Home > Employee

Huang, Jianyu

305

Technical University of Denmark rsted DTU Automation  

E-Print Network (OSTI)

Technical University of Denmark �rsted · DTU Automation Project: SICAM - SIngle Conversion stage;Isolated PDM and PWM DC-AC SICAMs Petar Ljusev, MSc., Ph.D. student, �rsted · DTU Automation e-mail: pl

306

D Riso-R-429 Automated Uranium  

E-Print Network (OSTI)

routinely used analytical techniques for uranium determina- tions in geological samples, fissionCM i D Riso-R-429 Automated Uranium Analysis by Delayed-Neutron Counting H. Kunzendorf, L. Løvborg AUTOMATED URANIUM ANALYSIS BY DELAYED-NEUTRON COUNTING H. Kunzendorf, L. Løvborg and E.M. Christiansen

307

A 150-Ton Universal Structure Testing Machine  

Science Journals Connector (OSTI)

... 150-ton universal structure testing machine for Short Bros, and Harland, Ltd. (Engineer, December 26, pp. 594–596). ...

C. F. TIPPER

1948-04-24T23:59:59.000Z

308

TEHNOMUS -New Technologies and Products in Machine Manufacturing Technologies (1) CMM : coordinate measuring machine  

E-Print Network (OSTI)

TEHNOMUS - New Technologies and Products in Machine Manufacturing Technologies (1) CMM : coordinate measuring machine - 1 - COMPARISON OF A MACHINE OF MEASUREMENT WITHOUT CONTACT AND A CMM(1) : OPTIMIZATION products, the process of measurement usually proceeds on a type of machine (for example CMM

Paris-Sud XI, Université de

309

Increasing efficiency of data mining systems by machine unification and double machine cache  

E-Print Network (OSTI)

Increasing efficiency of data mining systems by machine unification and double machine cache and in general data mining systems, we need to search through huge spaces of machine learn- ing algorithms. Meta-learning and other complex data mining approaches need to train and test thousands of learning machines while

Jankowski, Norbert

310

Signal machines : localization of isolated accumulation Signal machines : localization of isolated  

E-Print Network (OSTI)

Signal machines : localization of isolated accumulation Signal machines : localization of isolated'Orléans, Orléans, FRANCE 6 mars 2011 Journées Calculabilités Paris 1 / 39 #12;Signal machines : localization of isolated accumulation 1 Signal machines and isolated accumulations 2 Necessary conditions

Durand-Lose, Jérôme

311

Optimization of automation: I. Estimation method of cognitive automation rates reflecting the effects of automation on human operators in nuclear power plants  

Science Journals Connector (OSTI)

Abstract Since automation was introduced in various industrial fields, the concept of the automation rate has been used to indicate the inclusion proportion of automation among all work processes or facilities. Expressions of the inclusion proportion of automation are predictable, as is the ability to express the degree of the enhancement of human performance. However, many researchers have found that a high automation rate does not guarantee high performance. Therefore, to reflect the effects of automation on human performance, this paper proposes a new estimation method of the automation rate that considers the effects of automation on human operators in nuclear power plants (NPPs). Automation in \\{NPPs\\} can be divided into two types: system automation and cognitive automation. Some general descriptions and characteristics of each type of automation are provided, and the advantages of automation are investigated. The advantages of each type of automation are used as measures of the estimation method of the automation rate. One advantage was found to be a reduction in the number of tasks, and another was a reduction in human cognitive task loads. The system and the cognitive automation rate were proposed as quantitative measures by taking advantage of the aforementioned benefits. To quantify the required human cognitive task loads and thus suggest the cognitive automation rate, Conant’s information-theory-based model was applied. The validity of the suggested method, especially as regards the cognitive automation rate, was proven by conducting experiments. The result showed that a decreased rate of the operator working time was significantly related to the cognitive automation rate and that the calculation of the cognitive task load was useful as a measure of the cognitive automation rate.

Seung Min Lee; Jong Hyun Kim; Poong Hyun Seong

2014-01-01T23:59:59.000Z

312

Method and apparatus for monitoring machine performance  

DOE Patents (OSTI)

Machine operating conditions can be monitored by analyzing, in either the time or frequency domain, the spectral components of the motor current. Changes in the electric background noise, induced by mechanical variations in the machine, are correlated to changes in the operating parameters of the machine.

Smith, Stephen F. (Loudon, TN); Castleberry, Kimberly N. (Harriman, TN)

1996-01-01T23:59:59.000Z

313

Photogrammetry & Machine Vision 1. Image sensors  

E-Print Network (OSTI)

Photogrammetry & Machine Vision 1. Image sensors (a) Fundamentals of image sensors (b) CCD image'Apuzzo Photogrammetry and Machine Vision - 3 Point cloud processing, surface generation, texturing (b) Camera, noise) 2N. D'Apuzzo Photogrammetry and Machine Vision - 3 Point cloud processing, surface generation

Giger, Christine

314

Task and Machine Heterogeneities: Higher Moments Matter  

E-Print Network (OSTI)

Task and Machine Heterogeneities: Higher Moments Matter Abdulla M. Al-Qawasmeh 1 , Anthony A.potter}@colostate.edu jtsmith@digitalglobe.com Abstract - One type of heterogeneous computing (HC) systems consists of machines in this matrix represents the ETC of a specific task on a specific machine when executed exclusively. Heuristics

Maciejewski, Anthony A.

315

Photogrammetry & Machine Vision 1. Image sensors  

E-Print Network (OSTI)

Photogrammetry & Machine Vision 1. Image sensors (a) Fundamentals of image sensors (b) CCD image. Remondino, N. D'Apuzzo Photogrammetry and Machine Vision ­ 1. Measurement in images (b) Camera calibration of Photogrammetry and Machine Vision Fully understand: 1. Image based 3D and 4D measurement 2. Image based 3D

Giger, Christine

316

Photogrammetry & Machine Vision 1. Image sensors  

E-Print Network (OSTI)

Photogrammetry & Machine Vision 1. Image sensors (a) Fundamentals of image sensors (b) CCD image. Remondino, N. D'Apuzzo Photogrammetry and Machine Vision ­ 2. Camera calibration and orientation (b) Camera and Machine Vision ­ 2. Camera calibration and orientation (b) Calibration methods (reference object, point

Giger, Christine

317

Virtual Machine Monitors 36.1 Introduction  

E-Print Network (OSTI)

36 Virtual Machine Monitors 36.1 Introduction Years ago, IBM sold mainframes to large organizations, and a problem arose: what if the organization wanted to run different operating systems on the machine? (some yet another level of indirection in the form of a virtual machine monitor, or VMM or just monitor

Sheridan, Jennifer

318

Lean Green Skating Machine Report No. 1  

E-Print Network (OSTI)

Lean Green Skating Machine Report No. 1 Lean Green Skating Machine Report No. 1 Submitted by Simon Page 1 of 19 DISTRIBUTION STATEMENT: Distribution authorized to all. #12;Lean Green Skating Machine Report No. 1 Page 2 of 19 DISTRIBUTION STATEMENT: Distribution authorized to all. #12;Lean Green Skating

Levi, Anthony F. J.

319

Final Report "LAB-SCALE SNOWMAKING MACHINE"  

E-Print Network (OSTI)

Machine 19 Cost Comparison of Carbon Dioxide and Liquid Nitrogen 26 Effects of Input Parameters on Snow snow making machine. The machine uses liquid nitrogen to freeze atomized particles of water with an efficiency of 1.3 pounds of nitrogen per pound of snow. Snow density varies between 20 and 30 lbm/ft3

320

SOVIETS BUILD MACHINES TO PRODUCE KRILL PASTE'  

E-Print Network (OSTI)

EUROPE SOVIETS BUILD MACHINES TO PRODUCE KRILL PASTE' The Soviet Federal Research Institute of Fisheries and Oceanography ( V N I R 0) has built machines for production of a protein- rich paste from protein paste from Black Sea shrimp. Each machine, operated by 2 people, has a processing capacity of 1

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Computational equivalence between quantum Turing machines  

E-Print Network (OSTI)

Computational equivalence between quantum Turing machines and quantum circuit families Christian Westergaard 21st November 2005 Contents 1 The quantum Turing machine model 5 1.1 Basics of quantum Turing machines . . . . . . . . . . . . . . . . . . . 5 1.2 Projections on the quantum state space

Møller, Jesper Michael

322

Batch Scheduling with Deadlines on Parallel Machines  

E-Print Network (OSTI)

Batch Scheduling with Deadlines on Parallel Machines Peter Brucker Mikhail Y. Kovalyov, Yakov M of scheduling G groups of jobs on m parallel machines is considered. Each group consists of several identical) and to schedule the batches on the machines. It is possible for different batches of the same group

Magdeburg, Universität

323

Energy dissipation in bio molecular machines  

E-Print Network (OSTI)

Energy dissipation in bio molecular machines Thesis for the degree of Philosophiae Doctor Trondheim applied to molecular machines and energy trans- duction and dissipation in these. The main result to include heat effects. This framework is general and can be applied to other molecular machines as well

Kjelstrup, Signe

324

Technical Report No. 2006510 ACCELERATING MACHINES \\Lambda  

E-Print Network (OSTI)

Technical Report No. 2006­510 ACCELERATING MACHINES \\Lambda Robert Fraser and Selim G. Akl School Abstract This paper presents an overview of accelerating machines. We begin by exploring the history of the accelerating machine model and the potential power that it provides. We look at some of the problems that could

Graham, Nick

325

Biologically inspired mutual synchronization of manufacturing machines  

E-Print Network (OSTI)

Biologically inspired mutual synchronization of manufacturing machines Erjen Lefeber,a,1 , Herman machine is developed. This control system is based on a synchronization mechanism of enzymes replacing of a single turnover cycle. In manufacturing, batch machines serve several jobs simultaneously, e.g., heat

Armbruster, Dieter

326

Abstract AndParallel Machines Nachum Dershowitz  

E-Print Network (OSTI)

Abstract And­Parallel Machines Nachum Dershowitz University of Illinois Urbana, IL 61801 U are introduced. The first of them, the And­ Parallel Turing Machine, can be viewed as a generalization of the deterministic Turing machine in which the infinite tape is replaced by an infinite tree­like tape on which

Dershowitz, Nachum

327

BUILDING INFINITE MACHINES E.B. Davies  

E-Print Network (OSTI)

BUILDING INFINITE MACHINES E.B. Davies an infinite computing machine within a continuous Newtonian universe. The relevance of our construction* * to do it, [6, 9]. In section 4 we discuss why our machine is not in conflict with standard impos* *si

Davies, Brian

328

Toolbox Safety Talk Machine Shop Safety  

E-Print Network (OSTI)

Toolbox Safety Talk Machine Shop Safety Environmental Health & Safety Facilities Safety & Health to Environmental Health & Safety for recordkeeping. Machine shops are an integral part of the Cornell University be taken seriously. Many of the most frequently cited OSHA safety standards pertain to machine safeguarding

Pawlowski, Wojtek

329

Nano-Machines Achieve Huge Mechanical Breakthrough  

E-Print Network (OSTI)

NANO TECH Nano-Machines Achieve Huge Mechanical Breakthrough Dublin, Ireland (SPX) Sep 08, 2005 that use molecular 'nano'-machines of this kind to help perform physical tasks. Nano-machines could also owners set to return to battered Orleans l Six dead, two missing after heavy rains hit Page 1 of 3Nano

Leigh, David A.

330

Solar Automation Inc | Open Energy Information  

Open Energy Info (EERE)

Inc Inc Jump to: navigation, search Name Solar Automation Inc Place Albuquerque, New Mexico Zip NM 8110 Product Produces manufacturing equipment for PV cells. References Solar Automation Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Solar Automation Inc is a company located in Albuquerque, New Mexico . References ↑ "Solar Automation Inc" Retrieved from "http://en.openei.org/w/index.php?title=Solar_Automation_Inc&oldid=351247" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties About us Disclaimers Energy blogs Linked Data Developer services

331

Substation automation -- a ``bottoms up`` approach  

SciTech Connect

The proliferation of multi-purpose intelligent electronic devices in substations brought the availability of abundant and often overlapping data at the substation. This data can be used for improving the operation and maintenance of the substations and the entire power system. The objective of substation automation is to use technology to gather, consolidate and utilize this data for increasing the efficiency of power system operation and maintenance. Often automation functions are developed and offered around the capabilities of the preferred hardware and software of the integrator. Emphasis is placed on hardware, software and communication protocols rather than need, methodology and application. This can result in over-automation with complex, expensive and ineffective systems, or under-automation that fails to achieve the user`s objectives. The objective is to select appropriate hardware, software and methodology to build the most cost effective system to get the desired results. This paper describes steps to ensure the successful implementation of substation automation.

Thomas, J. [General Electric, Malvern, PA (United States)

1996-10-01T23:59:59.000Z

332

Dynamic Whitelist Generation for Automated Response  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Methodology Methodology Results Dynamic Whitelist Generation for Automated Response Chris Strasburg, Josh Adams Ames Laboratory, US DOE cstras@ameslab.gov, jadams@ameslab.gov The Ames Laboratory, US DOE 1 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results Outline 1 Introduction About Ames Laboratory Motivation 2 Methodology Data Classifiers Experiments 3 Results The Ames Laboratory, US DOE 2 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames Laboratory Motivation Ames Physical Environment The Ames Laboratory, US DOE 3 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames Laboratory Motivation Ames Network Environment The Ames Laboratory, US DOE 4 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames

333

Electrochemical and Electro-Discharge Machining with a Threshold Current  

Science Journals Connector (OSTI)

......machining and electro-discharge machining of a metal...problems in which the electric potential satisfies...ECM), electro-discharge machining (EDM...method of electrochemical arc machining (ECAM...depending upon the local electric current density. In......

A. A. LACEY; M. SHILLOR

1987-01-01T23:59:59.000Z

334

Heun-Polynomial Representation of Regular-at-Infinity Solutions for the Basic SUSY Ladder of Hyperbolic Pöschl-Teller Potentials Starting from the Reflectionless Symmetric Potential Well  

E-Print Network (OSTI)

It is shown that the regular-at-infinity solution of the 1D Schrodinger equation with the hyperbolic Poschl-Teller (h-PT) potential with integer parameters is expressible in terms of a n-order Heun polynomial in y=thr at an arbitrary negative energy. It was proven that the Heun polynomials in question form a subset of generally complex Lambe-Ward polynomials corresponding to zero value of the accessory parameter. Since the mentioned solution expressed in the new variable y has an almost-everywhere holomorphic (AEH) form it can be used as the factorization function (FF) for canonical Liouville-Darboux transformations (CLDTs) to construct a continuous family of shape-invariant rational potentials exactly-solvable by the Hp-seed (HpS) Heine polynomials. There are also two sequences of infinitely many rational potentials generated using CLDTs with nodeless regular-at-origin AEH FFs.

Gregory Natanson

2014-10-07T23:59:59.000Z

335

AUTOMATING GROUNDWATER SAMPLING AT HANFORD  

SciTech Connect

Until this past October, Fluor Hanford managed Hanford's integrated groundwater program for the U.S. Department of Energy (DOE). With the new contract awards at the Site, however, the CH2M HILL Plateau Remediation Company (CHPRC) has assumed responsibility for the groundwater-monitoring programs at the 586-square-mile reservation in southeastern Washington State. These programs are regulated by the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response Compensation and Liability Act (CERCLA). The purpose of monitoring is to track existing groundwater contamination from past practices, as well as other potential contamination that might originate from RCRA treatment, storage, and disposal (TSD) facilities. An integral part of the groundwater-monitoring program involves taking samples of the groundwater and measuring the water levels in wells scattered across the site. More than 1,200 wells are sampled each year. Historically, field personnel or 'samplers' have been issued pre-printed forms that have information about the well(s) for a particular sampling evolution. This information is taken from the Hanford Well Information System (HWIS) and the Hanford Environmental Information System (HEIS)--official electronic databases. The samplers used these hardcopy forms to document the groundwater samples and well water-levels. After recording the entries in the field, the samplers turned the forms in at the end of the day and the collected information was posted onto a spreadsheet that was then printed and included in a log book. The log book was then used to make manual entries of the new information into the software application(s) for the HEIS and HWIS databases. This is a pilot project for automating this tedious process by providing an electronic tool for automating water-level measurements and groundwater field-sampling activities. The automation will eliminate the manual forms and associated data entry, improve the accuracy of the information recorded, and enhance the efficiency and sampling capacity of field personnel. The goal of the effort is to eliminate 100 percent of the manual input to the database(s) and replace the management of paperwork by the field and clerical personnel with an almost entirely electronic process. These activities will include the following: scheduling the activities of the field teams, electronically recording water-level measurements, electronically logging and filing Groundwater Sampling Reports (GSR), and transferring field forms into the site-wide Integrated Document Management System (IDMS).

CONNELL CW; HILDEBRAND RD; CONLEY SF; CUNNINGHAM DE

2009-01-16T23:59:59.000Z

336

Optimal dimensions minimizing expected travel time of a single machine flow rack AS/RS  

Science Journals Connector (OSTI)

Abstract In this paper, the aim is to determine the optimal dimensions of a flow rack automated storage and retrieval system (AS/RS) using a single machine for storage and retrieval operations. These optimal dimensions are evaluated for minimum expected travel times of the storage and retrieval machine. An enumeration technique is used on a large range of system configurations going from 100 to 20,000 storage segments. Initially, optimization is carried out on six travel time expressions dealing with single and dual cycle travel times considering two dwell point positions. The results are then studied to investigate the influence of travel time expressions on both optimal dimensions and the shape factor of the system rack. Secondly, a new generalized mathematical model was developed by introducing an occurrence proportion parameter, relative to dual cycles, in order to determine the influence of the system functioning (proportion of dual cycles and load rate) on optimal dimensions.

Mohammed Adel Hamzaoui; Zaki Sari

2014-01-01T23:59:59.000Z

337

IDEF0 measurement planning model for a workpiece machined by a CNC lathe  

Science Journals Connector (OSTI)

In the past, most research concerning coordinate measuring machines (CMM) concentrated on the automation of measuring process planning. However, a comprehensive analysis of the entire measuring operation should be conducted using a systematic method, before the application of any of the planning techniques. This systematic analysis should consider measuring planning and inspection operations at the same time to let measuring operations be incorporated into the entire manufacturing system. In this article, the workpiece machined by a CNC lathe is used to study the planning of the measuring process, and an IDEF0 planning model for measuring sequence and activities of the CMM is proposed. The measurement planner and the production system designer may then clearly understand the relationship among the different functions of the measuring system to enable the system integration problem to be solved more easily.

Zone-Ching Lin; Cong-Zhi Lin

2002-01-01T23:59:59.000Z

338

Multi-axis tool path generation for surface finish machining of a rapid manufacturing process  

Science Journals Connector (OSTI)

This paper proposes a completely automated, integrated tool path planning for the finish machining of freeform surfaces as a part of the hybrid metal additive manufacturing and CNC machining. This planning capability spans from a generation of b-spline freeform surfaces, to surface finish optimisation, to collision detection, to tool path generation. Two scallop height methods have been used to compare the optimal tool path strategy. Both collision detection of a tool with neighbouring surfaces and collision correction for a tool are solved using a novel extension of the bounding box, which uses body diagonal points for computation. This paper proposes a multiple screening technique to improve the computational efficiency of tool path generation calculations.

Jomy Francis; Todd E. Sparks; Jianzhong Ruan; Frank Liou

2014-01-01T23:59:59.000Z

339

Z Machine | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Z Machine | National Nuclear Security Administration Z Machine | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Z Machine Z Machine Home > About Us > Our Programs > Defense Programs > Office of Research, Development, Test, and Evaluation > Office of Inertial Confinement Fusion > Facilities > Z Machine Z Machine Z Machine Sandia National Laboratories

340

Note PC catalogue (Machine body)  

E-Print Network (OSTI)

Specifications Image Brand Model 009 lenovo X61s Core2Duo L7500 1.60GHz 4GB 160GB 12.1inch 1.42Kg Windows Remarks Specifications Image Brand Model 018 Panasonic CF-F8EWMCAC Core2Duo P9300 2.26GHz 2GB 250GB 14 (Machine body) Accessory LAN Wireless LAN PC PC Code Remarks Specifications Image Brand Model 027

Katsumoto, Shingo

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Automated cleaning of electronic components  

SciTech Connect

Environmental and operator safety concerns are leading to the elimination of trichloroethylene and chlorofluorocarbon solvents in cleaning processes that remove rosin flux, organic and inorganic contamination, and particulates from electronic components. Present processes depend heavily on these solvents for manual spray cleaning of small components and subassemblies. Use of alternative solvent systems can lead to longer processing times and reduced quality. Automated spray cleaning can improve the quality of the cleaning process, thus enabling the productive use of environmentally conscious materials, while minimizing personnel exposure to hazardous materials. We describe the development of a prototype robotic system for cleaning electronic components in a spray cleaning workcell. An important feature of the prototype system is the capability to generate the robot paths and motions automatically from the CAD models of the part to be cleaned, and to embed cleaning process knowledge into the automatically programmed operations.

Drotning, W.; Meirans, L.; Wapman, W.; Hwang, Y.; Koenig, L.; Petterson, B.

1994-07-01T23:59:59.000Z

342

Conformance Testing based on UML State Machines Automated Test Case Generation, Execution and Evaluation  

E-Print Network (OSTI)

Work The impact of embedded systems in our everyday life is steadily growing. They are present not only comprise of hardware and software components in- teracting with a specialized technical environment via-performance hardware with the flexibility of software. The software is responsible for controlling the hardware

Paris-Sud XI, Université de

343

Automated X-ray image annotation: single versus ensemble of support vector machines  

Science Journals Connector (OSTI)

Advances in the medical imaging technology has lead to an exponential growth in the number of digital images that needs to be acquired, analyzed, classified, stored and retrieved in medical centers. As a result, medical image classification and retrieval ...

Devrim Unay; Octavian Soldea; Sureyya Ozogur-Akyuz; Mujdat Cetin; Aytul Ercil

2009-09-01T23:59:59.000Z

344

and machines, on-board autonomy, human control, and ground automation.  

E-Print Network (OSTI)

of .12 nm. LASIT takes images of the full solar disk of the sun in the Lyman-alpha wavelength (121.6 nm between 1 and 40 nm. The objective of these instruments is to measure the full disk solar ultraviolet in addition to being used for instrument calibration. One of the consequences of flying on the shuttle system

Stone, Peter

345

A Framework for Verifying Bit-Level Pipelined Machines Based on Automated Deduction and Decision Procedures  

E-Print Network (OSTI)

on decision procedures because to be industrially appli- cable, we need a firm connection to the RTL level Procedures Panagiotis Manolios1 and Sudarshan K. Srinivasan2 1College of Computing 2School of Electrical & Computer Engineering Georgia Institute of Technology Atlanta, Georgia 30318 1manolios@cc.gatech.edu, 2

Manolios, Panagiotis "Pete"

346

Machine Learning for Semi-Automated Gameplay Analysis Finnegan Southey, Robert Holte, Gang Xiao, Mark Trommelen  

E-Print Network (OSTI)

designed and developed by the University of Alberta GAMES group in cooperation with Electronic Arts. While Abstract Compelling gameplay requires constant testing and refinement during the development process analysis intended to support and augment the work of game designers, collecting and summarizing gameplay

Holte, Robert

347

A SIP-based Home Automation Platform: an Experimental Study  

E-Print Network (OSTI)

A SIP-based Home Automation Platform: an Experimental Study Benjamin Bertran, Charles Consel INRIA the requirements of home automation; we present the resulting architecture of a home automation system; and, we to tackle the challenges of the home automation domain. In this paper we present an approach and a platform

Boyer, Edmond

348

Fueling Robot Automates Hydrogen Hose Reliability Testing (Fact Sheet)  

SciTech Connect

Automated robot mimics fueling action to test hydrogen hoses for durability in real-world conditions.

Harrison, K.

2014-01-01T23:59:59.000Z

349

Automated Data Quality Analysis Research and Development  

E-Print Network (OSTI)

DOCUMENTATION 4.0 FUTURE DIRECTIONS 5.0 SUMMARY 6.0 CODE 1 2 3 5 5 12 17 17 18 February 2002, Final Report Energy Systems Laboratory, Texas A&M University p. 5 1.0 INTRODUCTION The Automated Data Quality process development is an effort to automate the analysis.... Automation of the "lower-level" data quality checking will enabled a more refined review process. Figure 1. Energy Core Polling and Reloading Process Diagram February 2002, Final Report Energy Systems Laboratory, Texas A&M University p. 6 2.2 Definitions...

Sweeney, J., Jr.; Haberl, J. S.

2002-01-01T23:59:59.000Z

350

j5 DNA Assembly Design Automation Software  

Science Journals Connector (OSTI)

j5 DNA Assembly Design Automation Software ... Here, we report the development and deployment of a web-based software tool, j5, which automates the design of scar-less multipart DNA assembly protocols including SLIC, Gibson, CPEC, and Golden Gate. ... The key innovations of the j5 design process include cost optimization, leveraging DNA synthesis when cost-effective to do so, the enforcement of design specification rules, hierarchical assembly strategies to mitigate likely assembly errors, and the instruction of manual or automated construction of scar-less combinatorial DNA libraries. ...

Nathan J. Hillson; Rafael D. Rosengarten; Jay D. Keasling

2011-12-07T23:59:59.000Z

351

Modular design for increasing assembly automation  

Science Journals Connector (OSTI)

Abstract Modular design can address the need for a high number of product variants and further allow a higher degree of automation in the assembly line. A framework is developed for the simultaneous modular product design and the design of automated manufacturing system. Product designs are optimized for automation using Design Structure Matrix and Modular Function Deployment. Alternative production systems are designed and accessed based on the analysis of assembly steps hierarchically. The implementation of the framework on the design of a production system for furniture assembly, able to handle multiple variants with a large number of components, is demonstrated.

Konstantinos Salonitis

2014-01-01T23:59:59.000Z

352

AUTOMATION IN THE MEAT INDUSTRY | Slaughter Line Operation  

Science Journals Connector (OSTI)

Abstract The strongest incentives for the slaughter industry to adopt automation technology relate to the drive for improved productivity through reduced labor. Automation in the pig slaughter industry has mainly been adopted in regions with high labor costs such as Northern Europe. In New Zealand, the lamb slaughter industry has been progressive in developing and using automation to automate the slaughter process. Automation in beef slaughter is limited because of the complexity associated with handling of the biological variation. Barriers for slaughter line automation include the high cost and complexity associated with the development of slaughter automation technology, combined with limited market size.

J.U. Nielsen; N.T. Madsen; R. Clarke

2014-01-01T23:59:59.000Z

353

X-ray power and yield measurements at the refurbished Z machine  

Science Journals Connector (OSTI)

Advancements have been made in the diagnostic techniques to measure accurately the total radiated x-ray yield and power from z-pinch implosion experiments at the Z machine with high accuracy. The Z machine is capable of outputting 2 MJ and 330 TW of x-ray yield and power and accurately measuring these quantities is imperative. We will describe work over the past several years which include the development of new diagnostics improvements to existing diagnostics and implementation of automated data analysis routines. A set of experiments on the Z machine were conducted in which the load and machine configuration were held constant. During this shot series it was observed that the total z-pinch x-ray emission power determined from the two common techniques for inferring the x-ray power a Kimfol filtered x-ray diode diagnostic and the total power and energy diagnostic gave 449 TW and 323 TW respectively. Our analysis shows the latter to be the more accurate interpretation. More broadly the comparison demonstrates the necessity to consider spectral response and field of view when inferring x-ray powers from z-pinch sources.

2014-01-01T23:59:59.000Z

354

Level of Automation Effects on Situation Awareness and Functional Specificity in Automation Reliance.  

E-Print Network (OSTI)

??This thesis investigates the relationships between performance, workload, and situation awareness at varying levels of automation. The relationships observed in this study are compared to… (more)

Smith, Adam

2012-01-01T23:59:59.000Z

355

Definition: Distribution Automation | Open Energy Information  

Open Energy Info (EERE)

Automation Automation Jump to: navigation, search Dictionary.png Distribution Automation DA is a family of technologies including sensors, processors, communication networks, and switches that can perform a number of distribution system functions depending on how they are implemented. Over the last 20 years, utilities have been applying DA to improve reliability, service quality and operational efficiency. More recently, DA is being applied to perform automatic switching, reactive power compensation coordination, or other feeder operations/control.[1] Related Terms sustainability, smart grid References ↑ https://www.smartgrid.gov/category/technology/distribution_automation [[Ca LikeLike UnlikeLike You and one other like this.One person likes this. Sign Up to see what your friends like.

356

Definition: Automated Distribution Circuit Switches | Open Energy  

Open Energy Info (EERE)

Circuit Switches Circuit Switches Jump to: navigation, search Dictionary.png Automated Distribution Circuit Switches Distribution circuit switches that can be operated automatically in response to control signals from local sensors, distribution automation systems, or grid control systems. Such switches can be installed as automated devices or existing equipment can be retrofitted with controls and communications. The degree of automation depends on the controls and communications system implemented. These switches can be opened or closed to isolate portions of a distribution circuit that has experienced a short circuit (fault), or must be taken out of service for maintenance or other operations. When used in combination, these switches can reroute power from other substations or nearby distribution circuits.[1]

357

LANL to certify automated influenza surveillance system  

NLE Websites -- All DOE Office Websites (Extended Search)

LANL to certify automated influenza surveillance system LANL to certify automated influenza surveillance system LANL to certify automated influenza surveillance system A compact automated system for surveillance and screening of potential pandemic strains of influenza and other deadly infectious diseases is a step closer to reality. January 31, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy

358

Automated visual inspection of rolled metal surfaces  

Science Journals Connector (OSTI)

A prototype for an automated visual on-line metal strip inspection system is described. The system is capable of both detecting and classifying surface defects in copper alloy strips, and it has been installed...

Timo Piironen; Olli Silven; Matti Pietikäinen…

1990-01-01T23:59:59.000Z

359

Automated intrusion recovery for web applications  

E-Print Network (OSTI)

In this dissertation, we develop recovery techniques for web applications and demonstrate that automated recovery from intrusions and user mistakes is practical as well as effective. Web applications play a critical role ...

Chandra, Ramesh, Ph. D. Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

360

Preface: Cognitive Engineering in Automated Systems Design  

E-Print Network (OSTI)

Preface: Cognitive Engineering in Automated Systems Design This special issue was motivated by an apparent paucity of research on applications of cognitive engineering principles in the design of complex systems including mainte- nance, manufacturing, and transportation systems. Cognitive engineering

Kaber, David B.

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Honeywell modular automation system computer software documentation  

SciTech Connect

This document provides a Computer Software Docuemntation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-21I.

Cunningham, L.T.

1997-01-20T23:59:59.000Z

362

ZigBee Smart Home Automation Systems  

Science Journals Connector (OSTI)

This chapter summarizes a completed UK government funded project, the indeedNET ZigBee home automation system, which heralds a milestone in the ... energy saving devices with the potential to help home owners and...

Shuang-Hua Yang

2014-01-01T23:59:59.000Z

363

Mirle Automation Corporation | Open Energy Information  

Open Energy Info (EERE)

Mirle Automation Corporation Mirle Automation Corporation Jump to: navigation, search Name Mirle Automation Corporation Place Hsinchu, Taiwan Zip 30077 Sector Solar Product A Taiwan-based automation system integrators and related product manufacturers who have entered thin film solar cell manufacturing equipment business. Coordinates 24.69389°, 121.148064° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":24.69389,"lon":121.148064,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

364

Distributed Intelligent Automated Demand Response (DIADR) Building  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Distributed Intelligent Automated Demand Distributed Intelligent Automated Demand Response (DIADR) Building Management System Distributed Intelligent Automated Demand Response (DIADR) Building Management System The U.S. Department of Energy (DOE) is currently conducting research into distributed intelligent-automated demand response (DIADR) building management systems. Project Description This project aims to develop a DIADR building management system with intelligent optimization and control algorithms for demand management, taking into account a multitude of factors affecting cost including: Comfort Heating, ventilating, and air conditioning (HVAC) Lighting Other building systems Climate Usage and occupancy patterns. The key challenge is to provide the demand response the ability to address more and more complex building systems that include a variety of loads,

365

Design automation for microfluidics-based biochips  

Science Journals Connector (OSTI)

Advances in microfluidics technology offer exciting possibilities in the realm of enzymatic analysis, DNA analysis, proteomic analysis involving proteins and peptides, immunoassays, implantable drug delivery devices, and environmental toxicity monitoring. ... Keywords: Microfluidics, biochips, design automation

Krishnendu Chakrabarty; Jun Zeng

2005-10-01T23:59:59.000Z

366

Automating Logic Rectification by Approximate SPFDs  

Science Journals Connector (OSTI)

In the digital VLSI cycle, a netlist is often modified to correct design errors, perform small specification changes or implement incremental rewiring-based optimization operations. Most existing automated logic rectification tools use a small set of ... Keywords: SAT-based algorithm, approximate SPFD, digital VLSI cycle, design errors, incremental rewiring-based optimization operations, automated logic rectification tools, predefined logic transformations, memory/time explosion problem

Yu-Shen Yang; S. Sinha; A. Veneris; R. K. Brayton

2007-01-01T23:59:59.000Z

367

Efficient Checkpointing of Virtual Machines using Virtual Machine Introspection  

SciTech Connect

Cloud Computing environments rely heavily on system-level virtualization. This is due to the inherent benefits of virtualization including fault tolerance through checkpoint/restart (C/R) mechanisms. Because clouds are the abstraction of large data centers and large data centers have a higher potential for failure, it is imperative that a C/R mechanism for such an environment provide minimal latency as well as a small checkpoint file size. Recently, there has been much research into C/R with respect to virtual machines (VM) providing excellent solutions to reduce either checkpoint latency or checkpoint file size. However, these approaches do not provide both. This paper presents a method of checkpointing VMs by utilizing virtual machine introspection (VMI). Through the usage of VMI, we are able to determine which pages of memory within the guest are used or free and are better able to reduce the amount of pages written to disk during a checkpoint. We have validated this work by using various benchmarks to measure the latency along with the checkpoint size. With respect to checkpoint file size, our approach results in file sizes within 24% or less of the actual used memory within the guest. Additionally, the checkpoint latency of our approach is up to 52% faster than KVM s default method.

Aderholdt, Ferrol [Tennessee Technological University] [Tennessee Technological University; Han, Fang [Tennessee Technological University] [Tennessee Technological University; Scott, Stephen L [ORNL] [ORNL; Naughton, III, Thomas J [ORNL

2014-01-01T23:59:59.000Z

368

Deutsch's Universal Quantum Turing Machine (Revisited)  

E-Print Network (OSTI)

Deutsch, Feynman, and Manin viewed quantum computing as a kind of universal physical simulation procedure. Much of the writing about quantum Turing machines has shown how these machines can simulate an arbitrary unitary transformation on a finite number of qubits. This interesting problem has been addressed most famously in a paper by Deutsch, and later by Bernstein and Vazirani. Quantum Turing machines form a class closely related to deterministic and probabilistic Turing machines and one might hope to find a universal machine in this class. A universal machine is the basis of a notion of programmability. The extent to which universality has in fact been established by the pioneers in the field is examined and a key notion in theoretical computer science (universality) is scrutinised. In a forthcoming paper, the authors will also consider universality in the quantum gate model.

Willem Fouché; Johannes Heidema; Glyn Jones; Petrus H. Potgieter

2007-01-16T23:59:59.000Z

369

A conversational Chinese Tutoring Machine  

E-Print Network (OSTI)

CAI (LAMBDA NIL (PROG1 (SET PARA) (CAIM07) (CAIM03) (CLRSCRN) (PRINTX '(Thanks for joining the Chinese Tutoring Machine) 9 15) (PRINTX '(bye bye !) 11 35) ) )) t*'0 '0'0************'k 'k*****V '@*It%'**'k**'k****'k**'@**1k *ll 'Nf****'k 0 'kt... **'0 * FUNCTION : CAIM03 This is the main driver function for lesson section. ***4'***1@*'0 4 4 'P * a%****'k 'k****'0**4 *V k*%**%'**%********%'**'I*V 4 4*** (DEFUN CAIM03 (LAMBDA NIL ( PROG1 (CAIM04) (COND ((EQUAL RES 'E) T) (T (CAIM05) (CAIM...

Cheng, Long-Fung

2012-06-07T23:59:59.000Z

370

Hypervelocity cutting machine and method  

DOE Patents (OSTI)

A method and machine 14 are provided for cutting a workpiece 12 such as concrete. A gun barrel 16 is provided for repetitively loading projectiles 22 therein and is supplied with a pressurized propellant from a storage tank 28. A thermal storage tank 32,32A is disposed between the propellant storage tank 28 and the gun barrel 16 for repetitively receiving and heating propellant charges which are released in the gun barrel 16 for repetitively firing projectiles 22 therefrom toward the workpiece 12. In a preferred embodiment, hypervelocity of the projectiles 22 is obtained for cutting the concrete workpiece 12 by fracturing thereof.

Powell, James R. (Shoreham, NY); Reich, Morris (Queens, NY)

1996-11-12T23:59:59.000Z

371

Free-piston cutting machine  

DOE Patents (OSTI)

A cutting machine includes a gun barrel for receiving a projectile. A compression tube is disposed in flow communication with the barrel and includes a piston therein. A reservoir is disposed in flow communication with the tube and receives a first gas under pressure. A second gas fills the compression tube on a front face of the piston. And, the pressurized first gas is discharged into the tube on a back face of the piston to accelerate the piston through the tube for compressing the second gas, and in turn launching the projectile through the barrel to impact a workpiece.

Ciccarelli, Gaby (East Setauket, NY); Subudhi, Manomohan (East Setauket, NY); Hall, Robert E. (Port Jefferson, NY)

2000-01-01T23:59:59.000Z

372

Hypervelocity cutting machine and method  

DOE Patents (OSTI)

A method and machine are provided for cutting a workpiece such as concrete. A gun barrel is provided for repetitively loading projectiles therein and is supplied with a pressurized propellant from a storage tank. A thermal storage tank is disposed between the propellant storage tank and the gun barrel for repetitively receiving and heating propellant charges which are released in the gun barrel for repetitively firing projectiles therefrom toward the workpiece. In a preferred embodiment, hypervelocity of the projectiles is obtained for cutting the concrete workpiece by fracturing thereof. 10 figs.

Powell, J.R.; Reich, M.

1996-11-12T23:59:59.000Z

373

Analysis of Open Automated Demand Response Deployments in California and Guidelines to Transition to Industry Standards  

E-Print Network (OSTI)

to  Automated  Demand   Response  and  the  OpenADR  ®  Automated  Demand  Response  Program.   https://Data  for  Automated  Demand  Response  in  Commercial  

Ghatikar, Girish

2014-01-01T23:59:59.000Z

374

Open Automated Demand Response Technologies for Dynamic Pricing and Smart Grid  

E-Print Network (OSTI)

for Automated Demand Response in Commercial Buildings. ” In2010. “Open Automated Demand Response Dynamic Pricing2009. “Open Automated Demand Response Communications

Ghatikar, Girish

2010-01-01T23:59:59.000Z

375

Explorations of Space-Charge Limits in Parallel-Plate Diodes and Associated Techniques for Automation  

E-Print Network (OSTI)

and Associated Techniques for Automation by Benjamin Ragan-and Associated Techniques for Automation Copyright 2013 byand Associated Techniques for Automation by Benjamin Ragan-

Ragan-Kelley, Benjamin

2013-01-01T23:59:59.000Z

376

Demonstration of Datacenter Automation Software and Hardware (DASH) at the California Franchise Tax Board  

E-Print Network (OSTI)

of Datacenter Automation Software and Hardware (DASH) at theof Datacenter Automation Software and Hardware (DASH) at theprotocol for building automation and control networks. It is

Bell, Geoffrey C.

2010-01-01T23:59:59.000Z

377

Automation for on-line remote-control in-situ electron microscopy  

E-Print Network (OSTI)

Pfefferkorn Conference (1996) Automation for On-Line Remote-Pfefferkorn Conference (1996) Automation for On-Line Remote-by incorporating local automation of stage control and

1996-01-01T23:59:59.000Z

378

Automated Demand Response Technologies and Demonstration in New York City using OpenADR  

E-Print Network (OSTI)

EMCS Vendor and Product Automated Logic Control RemoteBuildings Integrator, Automated Logic Corporation’s WebCTRLIntegrator (EBI), Automated Logic Corporation’s WebCTRL® ,

Kim, Joyce Jihyun

2014-01-01T23:59:59.000Z

379

Rapid Response Small Machining NNR Project 703025  

SciTech Connect

This project was an effort to develop a machining area for small sized parts that is capable of delivering product with a quick response time. This entailed focusing efforts on leaning out specific work cells that would result in overall improvement to the entire machining area. This effort involved securing the most efficient available technologies for these areas. In the end, this incorporated preparing the small machining area for transformation to a new facility.

Kanies, Tim

2008-12-05T23:59:59.000Z

380

Design and manufacturing of high precision roll-to-roll multilayer printing machine -- machine upgrade  

E-Print Network (OSTI)

In 2008, a group of MIT Master of Engineering students built a roll to roll machine for printing thiol onto a flexible gold substrate by self-assembly. The machine demonstrated good performance in high speed printing (400 ...

Zhu, Yufei

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Mathematical modelling approach for determining optimal machining parameters in turning with computer numerical control (CNC) machines  

Science Journals Connector (OSTI)

Due to advancement in the manufacturing technology the application of computer numerical control (CNC) machines have increased manifolds. The determination of machining parameters for optimal results in machining is a part of computer aided process planning. In computer numerical control (CNC) machining, determining optimum or appropriate cutting parameters can minimise machining errors such as tool breakage, tool deflection and tool wear, thus yielding a high productivity or minimum cost. Different mathematical models have been proposed by various researchers in the past for the determination of optimal machining parameters. The present paper attempt's to review the literature regarding 'machining parameter optimisation' for turning operation in CNC machines. Diverse contributing and important factors in mathematical modelling like, the economic criteria's, single and multi-pass turning, optimisation techniques and practical constraints deployed have been considered. A detailed discussion is presented regarding the topic and in the end conclusions are drawn.

Bhaskar Naithani; Santram Chauhan

2012-01-01T23:59:59.000Z

382

Machine Learning for Adaptive Computer Game Opponents .  

E-Print Network (OSTI)

??This thesis investigates the use of machine learning techniques in computer games to create a computer player that adapts to its opponent's game-play. This includes… (more)

Miles, Jonathan David

2009-01-01T23:59:59.000Z

383

Soil Machine Dynamics Ltd | Open Energy Information  

Open Energy Info (EERE)

Dynamics Ltd Jump to: navigation, search Name: Soil Machine Dynamics Ltd Region: United Kingdom Sector: Marine and Hydrokinetic Website: http:http:smd.co.ukproduc This company...

384

Machine Protection System response in 2011  

E-Print Network (OSTI)

The performance of the machine protection system during the 2011 run is summarized in this paper. Following an analysis of the beam dump causes in comparison to the previous 2010 run, special emphasis will be given to analyse events which risked to exposed parts of the machine to damage. Further improvements and mitigations of potential holes in the protection systems as well as in the change management will be evaluated along with their impact on the 2012 run. The role of the restricted Machine Protection Panel ( rMPP ) during the various operational phases such as commissioning, the intensity ramp up and Machine Developments is being discussed.

Zerlauth, M; Wenninger, J

2012-01-01T23:59:59.000Z

385

Atmospheric Plasma Jet Machining of Optical Surfaces  

Science Journals Connector (OSTI)

Deterministic surface machining with high spatial resolution and nanometric depth accuracy is urgently required in the fabrication of high-end optics. Thus, plasma jet tools with...

Böhm, Georg; Eichentopf, Inga-Maria; Arnold, Thomas

386

Optimal Design of Electrical Machines: Mathematical Programming ...  

E-Print Network (OSTI)

global heating up of the winding is rather roughly modeled by Ech (function of current electric ...... Electric Machines and Power Systems, pages. 71–92, 1992.

2012-06-06T23:59:59.000Z

387

6.685 Electric Machines, Fall 2003  

E-Print Network (OSTI)

Treatment of electromechanical transducers, rotating and linear electric machines. Lumped-parameter electromechanics of interaction. Development of device characteristics: energy conversion density, efficiency; and of ...

Kirtley, James L.

388

Electro discharge machining for micro manufacturing.  

E-Print Network (OSTI)

??Due to the high precision and good surface quality that it can give, Electrical Discharge Machining (EDM) is potentially an important process for the fabrication… (more)

Ivanov, Atanas

2008-01-01T23:59:59.000Z

389

MACHINING STABILITY OF WIRE EDM OF TITANIUM.  

E-Print Network (OSTI)

??This work presents an experimental investigation of wire electro-discharge machining (WEDM) of titanium alloy. The outstanding characteristics of titanium alloys such as their compatibility and… (more)

Nourbakhsh, Farnaz

2012-01-01T23:59:59.000Z

390

Covered Product Category: Refrigerated Beverage Vending Machines...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

vending machines are equipped with controls or software that put the lighting andor refrigeration systems into a low power state at night, on weekends, or other periods of...

391

Logo Turtle Graphics for the Lisp Machine  

E-Print Network (OSTI)

This paper is a manual for an implementation of Logo graphics primitives in Lisp on the MIT Lisp Machine. The graphics system provides:

Lieberman, Henry

1981-05-05T23:59:59.000Z

392

Machine and Beam Delivery Updates  

NLE Websites -- All DOE Office Websites (Extended Search)

MAchine and Beam delivery Updates FY13 MAchine and Beam delivery Updates FY13 Summary of Beam Delivery: FACET Summary Feb_15_22.pdf FACET Summary Feb_15_22.pdf FACET Summary Feb_23_Mar_1.pdf FACET Summary Feb_23_Mar_1.pdf FACET Summary Mar_2_8.pdf FACET Summary Mar_2_8.pdf FACET Summary Mar_9_15.pdf FACET Summary Mar_9_15.pdf FACET Summary Mar_16_22.pdf FACET Summary Mar_16_22.pdf FACET Summary Mar_23_29.pdf FACET Summary Mar_23_29.pdf FACET Summary Mar_30_Apr_5.pdf FACET Summary Mar_30_Apr_5.pdf FACET Summary Apr_6_12.pdf FACET Summary Apr_6_12.pdf FACET Summary Apr_27_May_3.pdf FACET Summary Apr_27_May_3.pdf FACET Summary May_4_10.pdf FACET Summary May_4_10.pdf Emittance Stability in Sector 2_31513.pdf Emittance Stability in Sector 2_31513.pdf FACET beam operations readiness with R56.pdf FACET beam operations readiness with R56.pdf (6/19/2013)

393

Micro-machined resonator oscillator  

DOE Patents (OSTI)

A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a telemetered sensor beacon'' that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20--100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available. 21 figs.

Koehler, D.R.; Sniegowski, J.J.; Bivens, H.M.; Wessendorf, K.O.

1994-08-16T23:59:59.000Z

394

Micro-machined resonator oscillator  

DOE Patents (OSTI)

A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a "telemetered sensor beacon" that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20-100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available.

Koehler, Dale R. (Albuquerque, NM); Sniegowski, Jeffry J. (Albuquerque, NM); Bivens, Hugh M. (Albuquerque, NM); Wessendorf, Kurt O. (Albuquerque, NM)

1994-01-01T23:59:59.000Z

395

International Conference on Machine Control & Guidance 2008 1 Automatic Guidance of Track Laying Machines with  

E-Print Network (OSTI)

1st International Conference on Machine Control & Guidance 2008 1 Automatic Guidance of Track Laying Machines with Respect to Coordinate Systems Th. ENGEL*, JJ. STUBY, Ch. GLAUSER, P. GÃ?LDENAPFEL machine guidance, this text focuses on presenting and solving three challenges without which coordinate

396

International Conference on Machine Control & Guidance 2008 1 Guidance for Partial Face Excavation Machines  

E-Print Network (OSTI)

1st International Conference on Machine Control & Guidance 2008 1 Guidance for Partial Face Excavation Machines Nod CLARKE-HACKSTON, Jochen BELZ VMT GmbH Allan HENNEKER Surex Pty Ltd Abstract information to the machine operator, VMT GmbH has developed a system to support precise excavation

397

Automated diagnostics scoping study. Final report  

SciTech Connect

The objective of the Automated Diagnostics Scoping Study was to investigate the needs for diagnostics in building operation and to examine some of the current technologies in automated diagnostics that can address these needs. The study was conducted in two parts. In the needs analysis, the authors interviewed facility managers and engineers at five building sites. In the technology survey, they collected published information on automated diagnostic technologies in commercial and military applications as well as on technologies currently under research. The following describe key areas that the authors identify for the research, development, and deployment of automated diagnostic technologies: tools and techniques to aid diagnosis during building commissioning, especially those that address issues arising from integrating building systems and diagnosing multiple simultaneous faults; technologies to aid diagnosis for systems and components that are unmonitored or unalarmed; automated capabilities to assist cause-and-effect exploration during diagnosis; inexpensive, reliable sensors, especially those that expand the current range of sensory input; technologies that aid predictive diagnosis through trend analysis; integration of simulation and optimization tools with building automation systems to optimize control strategies and energy performance; integration of diagnostic, control, and preventive maintenance technologies. By relating existing technologies to perceived and actual needs, the authors reached some conclusions about the opportunities for automated diagnostics in building operation. Some of a building operator`s needs can be satisfied by off-the-shelf hardware and software. Other needs are not so easily satisfied, suggesting directions for future research. Their conclusions and suggestions are offered in the final section of this study.

Quadrel, R.W.; Lash, T.A.

1994-06-01T23:59:59.000Z

398

JOURNAL DE PHYSIQUE Colloque C6, supplment au n 8, Tome 39, aot 1978, page C6-1010 MAGNETIC EXCITATIONS AND THE COOPERATIVE JAHN-TELLER TRANSITION IN PrCu2  

E-Print Network (OSTI)

. The structural phase transition was first observed in specific heat measurements /5/ which indicated EXCITATIONS AND THE COOPERATIVE JAHN-TELLER TRANSITION IN PrCu2 J.K. Kjems , H.R. Ott , S.M. Shapiro , and K'interaction quadrupolaire dominante entre les ions Pr + . Une tran- sition dipolaire vers le deuxième état excité est

Boyer, Edmond

399

ISA Approves Standard for Wireless Automation in Process Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. ISA Approves Standard for Wireless Automation in Process Control Applications More Documents & Publications DOE/OE National SCADA Test Bed Fiscal Year 2009 Work Plan Wireless System Considerations When Implementing NERC Critical Infrastructure Protection Standards Control Systems Security Standards: Accomplishments And Impacts

400

A study of mechanization of the training of operators of complex semi-automatic machines as compared to existing methods of training  

E-Print Network (OSTI)

-automatic ma- chine emplaying this instruction window system of' training. Simulated control boards have been made and tested success- fully for the following uses& 1. Safety training of manually-controlled machine operators. I An article by A. M... frame discuss- ing the partioular wrong answer chosen from the multiple choice question. 4. Training power plant substation operators for emer- gency situations. "Automated Teaohing Wachine", ~Au oig~ton, Vol. 7, No. 1, Jan. 1960, p. 1...

Gerloff, Don Gerald

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Quantum Cloning Machines and the Applications  

E-Print Network (OSTI)

No-cloning theorem is fundamental for quantum mechanics and for quantum information science that states an unknown quantum state cannot be cloned perfectly. However, we can try to clone a quantum state approximately with the optimal fidelity, or instead, we can try to clone it perfectly with the largest probability. Thus various quantum cloning machines have been designed for different quantum information protocols. Specifically, quantum cloning machines can be designed to analyze the security of quantum key distribution protocols such as BB84 protocol, six-state protocol, B92 protocol and their generalizations. Some well-known quantum cloning machines include universal quantum cloning machine, phase-covariant cloning machine, the asymmetric quantum cloning machine and the probabilistic quantum cloning machine etc. In the past years, much progress has been made in studying quantum cloning machines and their applications and implementations, both theoretically and experimentally. In this review, we will give a complete description of those important developments about quantum cloning and some related topics. On the other hand, this review is self-consistent, and in particular, we try to present some detailed formulations so that further study can be taken based on those results.

Heng Fan; Yi-Nan Wang; Li Jing; Jie-Dong Yue; Han-Duo Shi; Yong-Liang Zhang; Liang-Zhu Mu

2014-08-02T23:59:59.000Z

402

Performance of machines for lattice QCD simulations  

E-Print Network (OSTI)

We review the architecture of massively parallel machines used for lattice QCD simulations and present benchmarks for the performance of popular algorithms on these platforms. We cover commercial supercomputers, PC clusters, and custom-designed machines. We also speculate on future developments.

Tilo Wettig

2005-09-23T23:59:59.000Z

403

Chaotic Boltzmann machines with two elements  

E-Print Network (OSTI)

In this brief note, we show that chaotic Boltzmann machines truly yield samples from the probabilistic distribution of the corresponding Boltzmann machines if they are composed of only two elements. This note is an English translation (with slight modifications) of the article originally written in Japanese [H. Suzuki, Seisan Kenkyu 66 (2014), 315-316].

Hideyuki Suzuki

2015-01-28T23:59:59.000Z

404

STOCHASTIC SCHEDULING WITH PREEMPTIVE-REPEAT MACHINE  

E-Print Network (OSTI)

at the point where it was interrupted once the machine becomes operable again+ In the preemptive-repeat model processing will have to restart after the machine resumes its operation+ A significant number of results have is in a metal refinery in which the raw material is to be purified by melting it in a very high temperature

Sun, Xiaoqian

405

n-Tiered Test Automation Architecture for Agile Software Systems  

Science Journals Connector (OSTI)

Abstract This paper introduces a multi-tiered test automation architecture to optimize test automation in an Agile software development environment while increasing both the test coverage and depth of each tier. Test Automation is the act of converting manual test cases into automated scripts that can be executed autonomously. In general, testing accounts for roughly 60% of the overall development budget and approximately 50% of that is attributed to regression testing. In recent years software organizations have begun migrating to Agile software development practices and automated testing in hopes of reducing the cost, lengthy regression cycles, and time to market. Traditionally, test automation is conducted on stable, non-changing applications. In an Agile environment where the code constantly changes, automated test cases become obsolete and must constantly be refactored in order to provide meaningful feedback about the system's quality. In most instances the cost of maintenance of automated test code completely overshadows the entire automation effort and negates any possible Return on Investment (RoI). An n-Tiered Test Automation Architecture seeks to retain the RoI by abstracting the automation project into separate distinct tiers; Presentation, Business, Data, and Services. These abstractions allow automated testing to continue providing feedback despite the constant revision of the system. A case study was conducted using this method and the observations showed that the automation architecture was resilient to change while increasing the test coverage, the depth of testing, and the overall quality of the application under test.

Patrick Day

2014-01-01T23:59:59.000Z

406

Level-dynamic approach to the excited spectra of the Jahn-Teller model - kink-train lattice and 'glassy' quantum phase  

E-Print Network (OSTI)

The dynamics of excited phonon spectra of the Exe Jahn-Teller (hereafter, JT) model mapped onto the generalized Calogero-Moser (gCM) gas of pseudoparticles implies a complex interplay between nonlinearity and fluctuations of quasiparticle trajectories. A broad crossover appears in a pseudotime (interaction strength) between the initial oscillator region and the nonlinear region of the kink-train lattice as a superlattice of the kink-antikink gCM trajectories. The local nonlinear fluctuations, nuclei (droplets) of the growing kink phase arise at the crossover, forming a new intermediate droplet "glassy" phase as a precursor of the kink phase. The "glassy" phase is related to a broad maximum in the entropy of the probability distributions of pseudoparticle accelerations, or level curvatures. The kink-train lattice phase with multiple kink-antikink collisions is stabilised by long-range correlations when approaching a semiclassical limit. A series of bifurcations of nearest-level spacings were recognised as signatures of pre-chaotic behaviour at the quantum level in the kink phase. Statistical characteristics can be seen to confirm the coexistence within all of the spectra of both regularity and chaoticity to a varying extent (nonuniversality). Regions are observed within which one of the phases is dominant.

E. Majernikova; S. Shpyrko

2008-11-26T23:59:59.000Z

407

Gamow-Teller unit cross sections of the (p,n) reaction at 198 and 297 MeV on medium-heavy nuclei  

Science Journals Connector (OSTI)

Gamow-Teller (GT) unit cross sections, ??GT, are obtained at 198 and 297 MeV by measuring the double differential cross sections at 0° for the (p,n) reaction on Ni58, Zn70, Cd114, Sn118, and Sn120. The mass dependence of ??GT and the ratio of ??GT to the Fermi unit cross section, ??F, (R2) are also derived in the mass region of 58?A?120. The ??GT value for Zr90 at 297 MeV interpolated using the A-dependence obtained herein agrees with that used in a previous analysis where the GT transition strength over a wide energy region up to the continuum was discussed. However, the deduced Ni64??GT value at 198 MeV is 20% smaller than that obtained from the analysis of a previous (n,p) measurement. The present R2 values in the mass region heavier than Ca42 are larger than those in the region up to Ca42 and increase as a function of A.

M. Sasano; H. Sakai; K. Yako; T. Wakasa; S. Asaji; K. Fujita; Y. Fujita; M. B. Greenfield; Y. Hagihara; K. Hatanaka; T. Kawabata; H. Kuboki; Y. Maeda; H. Okamura; T. Saito; Y. Sakemi; K. Sekiguchi; Y. Shimizu; Y. Takahashi; Y. Tameshige; A. Tamii

2009-02-03T23:59:59.000Z

408

Classification and Feature Extraction in Man and Machine  

E-Print Network (OSTI)

Classification and Feature Extraction in Man and Machine Dissertation zur Erlangung des Grades stimuli and for their subsequent classification. A methodology combining human psychophysics and machine learning is introduced, where feature extractors are modeled using methods from unsupervised machine

409

Machine Learning Algorithms for Cancer Diagnosis Abraham Karplus  

E-Print Network (OSTI)

Machine Learning Algorithms for Cancer Diagnosis Abraham Karplus Santa Cruz County Science Fair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Machine Learning 5 Testing Methods Conclusion 15 Future Work 16 Acknowledgements 17 External software 18 References 19 2 #12;Overview Machine

Karplus, Kevin

410

A hybrid type small 5-axis CNC milling machine  

E-Print Network (OSTI)

5-axis CNC milling machines are important in a number of industries ranging from aerospace to consumer-die-mold machining because they can deliver high machining accuracy with a spindle tilting capacity. Most of these ...

Son, Seung-Kil, 1964-

2002-01-01T23:59:59.000Z

411

Process characterization of Electrical Discharge Machining of highly doped silicon  

E-Print Network (OSTI)

Electrical Discharge Machining (EDM) is an advanced machining process that removes material via thermal erosion through a plasma arc. The machining process is accomplished through the application of high frequency current ...

Crawford, Gregory Allan

2012-01-01T23:59:59.000Z

412

Virtual machining considering dimensional, geometrical and tool deflection errors in three-axis CNC milling machines  

Science Journals Connector (OSTI)

Abstract Virtual manufacturing systems can provide useful means for products to be manufactured without the need of physical testing on the shop floor. As a result, the time and cost of part production can be decreased. There are different error sources in machine tools such as tool deflection, geometrical deviations of moving axis and thermal distortions of machine tool structures. Some of these errors can be decreased by controlling the machining process and environmental parameters. However other errors like tool deflection and geometrical errors which have a big portion of the total error, need more attention. This paper presents a virtual machining system in order to enforce dimensional, geometrical and tool deflection errors in three-axis milling operations. The system receives 21 dimensional and geometrical errors of a machine tool and machining codes of a specific part as input. The output of the system is the modified codes which will produce actual machined part in the virtual environment.

Mohsen Soori; Behrooz Arezoo; Mohsen Habibi

2014-01-01T23:59:59.000Z

413

Field Testing of Automated Demand Response for Integration of Renewable Resources in California's Ancillary Services Market for Regulation Products  

E-Print Network (OSTI)

Controls ° Larry Bacher, Automated Logic Corporation ° Louiscontrolled from a central Automated Logic Corporation energy

Kiliccote, Sila

2013-01-01T23:59:59.000Z

414

Definition: Automated Capacitors | Open Energy Information  

Open Energy Info (EERE)

Capacitors Capacitors Jump to: navigation, search Dictionary.png Automated Capacitors Capacitors can increase the voltage on a distribution circuit by providing reactive power (often referred to as volt-amperes-reactive or VArs). Capacitor banks are switched in discrete steps, either manually, or in response to the voltage at the location where they are connected; typically, distribution capacitor banks are switched in a single step. If the voltage falls too far below the set point, the capacitor is switched in to raise the voltage. If the voltage rises too high above the set point, the capacitor is switched out to lower the voltage. Automated capacitors can be switched in coordination with other voltage control devices with signals from local sensors, distribution automation systems, or grid

415

AIS Automation Dresden | Open Energy Information  

Open Energy Info (EERE)

AIS Automation Dresden AIS Automation Dresden Jump to: navigation, search Name AIS Automation Dresden Place Dresden, Germany Zip D-01237 Product Provides software for industrial process control for the semiconductor and photovoltaic industries. Coordinates 51.053645°, 13.740815° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":51.053645,"lon":13.740815,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

416

Analysis of Open Automated Demand Response Deployments in California  

E-Print Network (OSTI)

LBNL-6560E Analysis of Open Automated Demand Response Deployments in California and Guidelines The work described in this report was coordinated by the Demand Response Research. #12; #12;Abstract This report reviews the Open Automated Demand Response

417

Automated Demand Response Strategies and Commissioning Commercial Building Controls  

E-Print Network (OSTI)

4 9 . Piette et at Automated Demand Response Strategies andDynamic Controls for Demand Response in New and ExistingFully Automated Demand Response Tests in Large Facilities"

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

418

Petri Net Based Research of Home Automation Communication Protocol  

Science Journals Connector (OSTI)

The popularity of home automation has been increasing greatly in recent years. ... distributed, uncertain or randomized protocol model) of home automation, many questions concerned. For instance, is ... net to de...

Guangxuan Chen; Yanhui Du; Panke Qin; Jin Du…

2013-01-01T23:59:59.000Z

419

A framework for interactive end-user web automation.  

E-Print Network (OSTI)

??This research investigates the feasibility and usefulness of a Web-based model for end-user Web automation. The aim is to empower end users to automate their… (more)

Eliwa, Essam

2013-01-01T23:59:59.000Z

420

Department of Mechanical Engineering Spring 2011 Nanoparticle Reactor Automation  

E-Print Network (OSTI)

PENNSTATE Department of Mechanical Engineering Spring 2011 Nanoparticle Reactor Automation Overview would be fully automated and able to run overnight. The team was also asked to keep the solutions from

Demirel, Melik C.

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Automating Logic Rectification by Approximate SPFDs Yu-Shen Yang  

E-Print Network (OSTI)

Automating Logic Rectification by Approximate SPFDs Yu-Shen Yang Dept. of ECE University of Toronto changes or implement incremental rewiring-based optimization operations. Most existing automated logic

Veneris, Andreas

422

Application of Machine Learning and Crowdsourcing to Detection of Cybersecurity Threats Application of Machine Learning and Crowdsourcing  

E-Print Network (OSTI)

Application of Machine Learning and Crowdsourcing to Detection of Cybersecurity Threats 1 Application of Machine Learning and Crowdsourcing to Detection of Cybersecurity Threats February 2011 Eugene of Cybersecurity Threats 2 Abstract We are applying machine learning and crowdsourcing to cybersecurity

Fink, Eugene

423

High Metal Removal Rate Process for Machining Difficult Materials...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High Metal Removal Rate Process for Machining Difficult Materials High Metal Removal Rate Process for Machining Difficult Materials highmetalremovalprocessfactsheet.pdf More...

424

Design of a high precision desktop wire electrical discharge machine.  

E-Print Network (OSTI)

??This thesis discusses the design of a wire electrical discharge machine that is small enough to be deemed a desktop machine that achieves sub micron… (more)

Dunlop, David James

2010-01-01T23:59:59.000Z

425

DOE - Office of Legacy Management -- La Pointe Machine and Tool...  

Office of Legacy Management (LM)

La Pointe Machine and Tool Co - MA 16 FUSRAP Considered Sites Site: LA POINTE MACHINE AND TOOL CO. (MA.16 ) Eliminated from consideration under FUSRAP Designated Name: Not...

426

Rapid Compression Machine ? A Key Experimental Device to Effectively...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Rapid Compression Machine A Key Experimental Device to Effectively Collaborate with Basic Energy Sciences Rapid Compression Machine A Key Experimental Device to Effectively...

427

Machine learning based prediction for peptide drift times in...  

NLE Websites -- All DOE Office Websites (Extended Search)

Machine learning based prediction for peptide drift times in ion mobility spectrometry . Machine learning based prediction for peptide drift times in ion mobility spectrometry ....

428

Parallel machine match-up scheduling with manufacturing cost considerations  

E-Print Network (OSTI)

decisions on parallel CNC machines: -constraint approach.bounding mechanism for the CNC machine scheduling problemsprocessing times is the CNC turning operation where

Aktürk, M. Selim; Atamtürk, Alper; Gürel, Sinan

2010-01-01T23:59:59.000Z

429

Advnaced Power Electronics and Electric Machines (APEEM) R&D...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Advnaced Power Electronics and Electric Machines (APEEM) R&D Program Overview Advnaced Power Electronics and Electric Machines (APEEM) R&D Program Overview 2010 DOE Vehicle...

430

Acoustic Emission Mapping of Discharges in Spark Erosion Machining.  

E-Print Network (OSTI)

?? Electrical discharge machining (EDM) is a non-conventional machining process utilizing a series of electrical discharges to melt and vaporize workpiece material. In a wire… (more)

Smith, Craig

2012-01-01T23:59:59.000Z

431

Automated Store Management For Drum Storage Facility  

SciTech Connect

This paper describes advanced system technology developed for a new Drum Storage Facility to be operated by Taiwan Power Company (TPC). A logistics management concept is applied for the storage of solid rad-wastes in terms of automated handling, transportation and storing as well as in terms of data management. The individual equipments, such as automated Bridge Cranes, Automatic Guided Vehicles and auxiliary systems are introduced in this paper and the store management process is outlined. The authors report furthermore on challenges during the design and engineering phase and review the project implementation from the equipment supplier's end. (authors)

Koller, W.; Lang, R. [Siempelkamp Nukleartechnik GmbH, Krefeld (Germany)

2008-07-01T23:59:59.000Z

432

Beyond Commissioning: The Role of Automation  

SciTech Connect

This article takes a brief look at the benefits of commissioning and describes a vision of the future where most of the objectives of commissioning will be accomplished automatically by capabilities built into the building systems themselves. Commissioning will become an activity that's performed continuously rather than periodically, and only repairs requiring replacement or overhaul of equipment will require manual intervention. The article then identifies some of the technologies that will be needed to realize this vision and ends with a call for all involved in the enterprise of building commissioning and automation to embrace and dedicate themselves to a future of automated commissioning.

Brambley, Michael R.; Katipamula, Srinivas

2005-02-01T23:59:59.000Z

433

Automated generation of lattice QCD Feynman rules  

E-Print Network (OSTI)

The derivation of the Feynman rules for lattice perturbation theory from actions and operators is complicated, especially for highly improved actions such as HISQ. This task is, however, both important and particularly suitable for automation. We describe a suite of software to generate and evaluate Feynman rules for a wide range of lattice field theories with gluons and (relativistic and/or heavy) quarks. Our programs are capable of dealing with actions as complicated as (m)NRQCD and HISQ. Automated differentiation methods are used to calculate also the derivatives of Feynman diagrams.

A. Hart; G. M. von Hippel; R. R. Horgan; E. H. Müller

2009-04-02T23:59:59.000Z

434

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network (OSTI)

Report 2009. Open Automated Demand Response Communicationsand Techniques for Demand Response. California Energyand S. Kiliccote. Estimating Demand Response Load Impacts:

Kiliccote, Sila

2010-01-01T23:59:59.000Z

435

How to Make Ad Hoc Proof Automation Less Ad Hoc  

E-Print Network (OSTI)

How to Make Ad Hoc Proof Automation Less Ad Hoc Georges Gonthier1 Beta Ziliani2 Aleks Nanevski3 Software Institute, Madrid ICFP 2011, Tokyo #12;Why proof automation at ICFP? Ad hoc polymorphism Overloading terms Ad hoc proof automation Overloading lemmas "How to make ad hoc polymorphism less ad hoc

Dreyer, Derek

436

Techniques for Securing Substation Automation Systems David Guidry1  

E-Print Network (OSTI)

Techniques for Securing Substation Automation Systems David Guidry1 , Mike Burmester1 , Xiuwen Liu1 propose techniques for resilient substation automation of power utility systems with security based-90-5 compliant substation automation systems that are resilient. We demonstrate the feasibility of our approach

Burmester, Mike

437

Automated FMEA based diagnostic symptom generation. Neal Snooke1,  

E-Print Network (OSTI)

Automated FMEA based diagnostic symptom generation. Neal Snooke1, , Chris Price Department the model based simulation used to produce an automated Failure Modes and Effect Analysis (FMEA to automate the production of a FMEA report, and the paper also considers the relationship between FMEA

Snooke, Neal

438

Home Automation in the Wild: Challenges and Opportunities  

E-Print Network (OSTI)

Home Automation in the Wild: Challenges and Opportunities A.J. Bernheim Brush, Bongshin Lee, Ratul enabling home automation. However, these technologies have not been widely adopted despite being available visits to 14 households with home automation. The long term experience, both positive and negative

Rajamani, Sriram K.

439

A Component Framework for Telecare and Home Automation  

E-Print Network (OSTI)

A Component Framework for Telecare and Home Automation Claire Maternaghan and Kenneth J. Turner-the-shelf and novel components. Keywords ­ Component Framework, Home Automation, Service-Oriented Architecture required. Home automation allows users to interact with their home as a whole, and to have flexible control

Hammerton, James

440

Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns  

E-Print Network (OSTI)

Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns Edwin O of two prediction algorithms, thus demonstrating multiple uses for a home automation system. Finally, we Several research efforts are focused on home automation. The Intelligent Room [2] uses an array of sensors

Cook, Diane J.

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Remote-Controlled Home Automation Systems with Different Network Technologies  

E-Print Network (OSTI)

Remote-Controlled Home Automation Systems with Different Network Technologies Armando Roy Delgado into the potential for remote controlled operation of home automation systems. It considers problems, 2002) which certainly requires a careful study before developing any suitable Home Automation System

Grout, Vic

442

Automation strategies: existing theory or ad hoc decisions?  

Science Journals Connector (OSTI)

Automating manufacturing systems potentially improves competitiveness. Empirical studies show that the most successful result is achieved when decisions concerning automation are linked to the manufacturing strategies and competitive priorities of the company. It is suggested that automation is regarded as a separate decision group, within the manufacturing strategy content field.

Mats Winroth; Kristina Safsten; Johan Stahre

2007-01-01T23:59:59.000Z

443

Density Functional Theory-Based Database Development and CALPHAD Automation  

E-Print Network (OSTI)

Density Functional Theory-Based Database Development and CALPHAD Automation YI WANG,1,2 SHUNLI, the integration of first-principles calculations, CALPHAD modeling, and the automation of phase diagram, and the automated calculation of a phase diagram for the Al- Mg system. INTRODUCTION In thermodynamics, a phase

Chen, Long-Qing

444

Security Automation Developer Days March 22-25, 2011  

E-Print Network (OSTI)

Security Automation Developer Days March 22-25, 2011 Portrait Room The National Institute Reporting Format (ARF) efforts. 1:00 ­ 2:50 Adv. Tailoring and Automated Profile Selection Charles Schmidt tailoring procedures, and structures that could support automated selection of profiles. This discussion

Magee, Joseph W.

445

The Automation of Sound Reasoning and Successful Proof Finding  

E-Print Network (OSTI)

709 44 The Automation of Sound Reasoning and Successful Proof Finding LARRY WOS AND BRANDEN scientist naturally envisioned the automation of sound rea- soning ­ reasoning in which conclusions, and find proofs. But can such logical reasoning be fully automated? Can a single computer program

Fitelson, Branden

446

http://jla.sagepub.com/ Journal of Laboratory Automation  

E-Print Network (OSTI)

http://jla.sagepub.com/ Journal of Laboratory Automation http://jla.sagepub.com/content/early/2012 2012Journal of Laboratory Automation Timothy J. Bunning and Tony Jun Huang Yan Jun Liu, Mengqian Lu://www.sagepublications.com On behalf of: Society for Laboratory Automation and Screening can be found at:Journal of Laboratory

Demirel, Melik C.

447

IT/Automation Cost Reduction in Intel's Manufacturing Environment  

E-Print Network (OSTI)

IT/Automation Cost Reduction in Intel's Manufacturing Environment Brian Subirana subirana@mit.edu MIT Center for Coordination Science WP #222 July 2003 #12;IT/Automation Cost Reduction in Intel maintaining existing service levels. "We want you to reduce automation costs by 50% while maintaining equal

448

Control, automation and the hot rolling of steel  

Science Journals Connector (OSTI)

...Shercliff and M. J. Stowell Control, automation and the hot rolling of steel P.J...Rugby CV21 1BU, UK The current state of automation and control for hot rolling mills...mills|rolling mill models| Control, automation and the hot rolling of steel By P...

1999-01-01T23:59:59.000Z

449

AUTOMATED LOGIC SYNTHESIS OF RANDOM PATTERN TESTABLE CIRCUITS  

E-Print Network (OSTI)

AUTOMATED LOGIC SYNTHESIS OF RANDOM PATTERN TESTABLE CIRCUITS Nur A. Touba and Edward J. Mc during logic synthesis. An automated logic synthesis procedure is described which takes as an input a two. The approach taken in this paper is to consider random pattern testability during logic synthesis. An automated

Touba, Nur A.

450

Electric machine for hybrid motor vehicle  

DOE Patents (OSTI)

A power system for a motor vehicle having an internal combustion engine and an electric machine is disclosed. The electric machine has a stator, a permanent magnet rotor, an uncluttered rotor spaced from the permanent magnet rotor, and at least one secondary core assembly. The power system also has a gearing arrangement for coupling the internal combustion engine to wheels on the vehicle thereby providing a means for the electric machine to both power assist and brake in relation to the output of the internal combustion engine.

Hsu, John Sheungchun (Oak Ridge, TN)

2007-09-18T23:59:59.000Z

451

JBK-75 stainless steel machinability study  

SciTech Connect

The study on forgings characterized machinability of the material by varying cutting speeds and feedrates utilizing four tools for the roughing operation and four tools for the semi-finish operation. Tools tested were obtained from four manufacturers. Twelve parts were machined utilizing an experimental design to determine all possible interactions between cutting speeds and feedrates. To evaluate the machinability of the material, quantitative measures in tool life, tool wear, surface finish, chip control, and material removal rates were analyzed. Benefits gained from this study are: higher material removal rates, longer tool life, minimal tool wear, improved chip control and reliability, increased productivity, and cost minimization.

McManigle, A.P.; Simonis, A.W.

1993-09-02T23:59:59.000Z

452

Switching surface chemistry with supramolecular machines.  

SciTech Connect

Tethered supramolecular machines represent a new class of active self-assembled monolayers in which molecular configurations can be reversibly programmed using electrochemical stimuli. We are using these machines to address the chemistry of substrate surfaces for integrated microfluidic systems. Interactions between the tethered tetracationic cyclophane host cyclobis(paraquat-p-phenylene) and dissolved {pi}-electron-rich guest molecules, such as tetrathiafulvalene, have been reversibly switched by oxidative electrochemistry. The results demonstrate that surface-bound supramolecular machines can be programmed to adsorb or release appropriately designed solution species for manipulating surface chemistry.

Dunbar, Timothy D.; Kelly, Michael James; Jeppesen, Jan O. (University of California, Los Angeles, CA); Bunker, Bruce Conrad; Matzke, Carolyn M.; Stoddart, J. Fraser; Huber, Dale L.; Kushmerick, James G.; Flood, Amar H. (University of California, Los Angeles, CA); Perkins, Julie (University of California, Los Angeles, CA); Cao, Jianguo (University of California, Los Angeles, CA)

2005-07-01T23:59:59.000Z

453

Salsbury and Diamond: Automated Testing of HVAC Systems for Commissioning -1 -Automated Testing of HVAC Systems for Commissioning  

E-Print Network (OSTI)

and Diamond: Automated Testing of HVAC Systems for Commissioning - 1 - Automated Testing of HVAC Systems This paper describes an approach to the automation of the commissioning of HVAC systems. The approach of many HVAC systems is limited more by poor installation, commissioning, and maintenance than by poor

454

Evolution of the mirror machine  

SciTech Connect

The history of the magnetic-mirror approach to a fusion reactor is primarily the history of our understanding and control of several crucial physics issues, coupled with progress in the technology of heating and confining a reacting plasma. The basic requirement of an MHD-stable plasma equilibrium was achieved following the early introduction of minimum-B multipolar magnetic fields. In refined form, the same magnetic-well principle carries over to our present experiments and to reactor designs. The higher frequency microinstabilities, arising from the non-Maxwellian particle distributions inherent in mirror machines, have gradually come under control as theoretical prescriptions for distribution functions have been applied in the experiments. Even with stability, the classical plasma leakage through the mirrors posed a serious question for reactor viability until the principle of electrostatic axial stoppering was applied in the tandem mirror configuration. Experiments to test this principle successfully demonstrated the substantial improvement in confinement predicted. Concurrent with advances in mirror plasma physics, development of both high-power neutral beam injectors and high-speed vacuum pumping techniques has played a crucial role in ongoing experiments. Together with superconducting magnets, cryogenic pumping, and high-power radiofrequency heating, these technologies have evolved to a level that extrapolates readily to meet the requirements of a tandem mirror fusion reactor.

Damm, C. C.

1983-08-18T23:59:59.000Z

455

Automated Architectural Exploration for Signal Processing Algorithms  

E-Print Network (OSTI)

Automated Architectural Exploration for Signal Processing Algorithms Ramsey Hourani, Ravi Jenkal, W processing algorithms. The goal of our framework is to improve hardware architectural exploration by guiding Property (IP) cores for system level signal processing algorithms. We present our view of a framework

Davis, Rhett

456

Automated Fuel Dispensing System Form Instructions  

E-Print Network (OSTI)

Automated Fuel Dispensing System Form Instructions If additional forms are necessary to provide(s) are hired and will be obtaining fuel, an Add Driver Form MUST be submitted for entry into the web database and/or diesel fuel to operate. Note: When a new vehicle, golf cart (gasoline), etc., is placed

Fernandez, Eduardo

457

Automated structure solution with the PHENIX suite  

SciTech Connect

Significant time and effort are often required to solve and complete a macromolecular crystal structure. The development of automated computational methods for the analysis, solution, and completion of crystallographic structures has the potential to produce minimally biased models in a short time without the need for manual intervention. The PHENIX software suite is a highly automated system for macromolecular structure determination that can rapidly arrive at an initial partial model of a structure without significant human intervention, given moderate resolution, and good quality data. This achievement has been made possible by the development of new algorithms for structure determination, maximum-likelihood molecular replacement (PHASER), heavy-atom search (HySS), template- and pattern-based automated model-building (RESOLVE, TEXTAL), automated macromolecular refinement (phenix. refine), and iterative model-building, density modification and refinement that can operate at moderate resolution (RESOLVE, AutoBuild). These algorithms are based on a highly integrated and comprehensive set of crystallographic libraries that have been built and made available to the community. The algorithms are tightly linked and made easily accessible to users through the PHENIX Wizards and the PHENIX GUI.

Terwilliger, Thomas C [Los Alamos National Laboratory; Zwart, Peter H [LBNL; Afonine, Pavel V [LBNL; Grosse - Kunstleve, Ralf W [LBNL

2008-01-01T23:59:59.000Z

458

Automated Structure Solution with the PHENIX Suite  

SciTech Connect

Significant time and effort are often required to solve and complete a macromolecular crystal structure. The development of automated computational methods for the analysis, solution and completion of crystallographic structures has the potential to produce minimally biased models in a short time without the need for manual intervention. The PHENIX software suite is a highly automated system for macromolecular structure determination that can rapidly arrive at an initial partial model of a structure without significant human intervention, given moderate resolution and good quality data. This achievement has been made possible by the development of new algorithms for structure determination, maximum-likelihood molecular replacement (PHASER), heavy-atom search (HySS), template and pattern-based automated model-building (RESOLVE, TEXTAL), automated macromolecular refinement (phenix.refine), and iterative model-building, density modification and refinement that can operate at moderate resolution (RESOLVE, AutoBuild). These algorithms are based on a highly integrated and comprehensive set of crystallographic libraries that have been built and made available to the community. The algorithms are tightly linked and made easily accessible to users through the PHENIX Wizards and the PHENIX GUI.

Zwart, Peter H.; Zwart, Peter H.; Afonine, Pavel; Grosse-Kunstleve, Ralf W.; Hung, Li-Wei; Ioerger, Tom R.; McCoy, A.J.; McKee, Eric; Moriarty, Nigel; Read, Randy J.; Sacchettini, James C.; Sauter, Nicholas K.; Storoni, L.C.; Terwilliger, Tomas C.; Adams, Paul D.

2008-06-09T23:59:59.000Z

459

Viability of Modern Automated Rapid Transit Applications  

E-Print Network (OSTI)

guideway: elevated, underground, at grade · Fully automated: electric-powered, electronic controls · Non · Headways/frequency: about 30 seconds/120 veh/hr · Small vehicles: 4-6 passengers, low weight · Eco: 4 km, 21 vehicles, two stations (parking and terminal) · Open to public service Spring 2011, 22

Minnesota, University of

460

Honeywell Modular Automation System Computer Software Documentation  

SciTech Connect

This document provides a Computer Software Documentation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-211 and vertical denitration calciner in HC-230C-2.

CUNNINGHAM, L.T.

1999-09-27T23:59:59.000Z

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

AUTOMATED PLANNING FOR HYDROTHERMAL VENT PROSPECTING USING  

E-Print Network (OSTI)

AUTOMATED PLANNING FOR HYDROTHERMAL VENT PROSPECTING USING AUVS by ZEYN A SAIGOL A thesis submitted of searching the ocean floor for hydrothermal vents, using autonomous underwater vehicles (AUVs process (POMDP), but with a very large state space (of the order of 10123 states). This size of problem

Yao, Xin

462

PeopleSoft HR ECR Automation Process  

E-Print Network (OSTI)

PeopleSoft HR ECR Automation Process Inquiry Page March 2011 #12;ECR Transaction Inquiry To view a transaction that is in process or already completed, follow the menu navigation below: Home > Employee Change Home > Employee Change Request (ECR) > Inquire > ECR Inquire 5 #12;6 · The Originator is the only one

Huang, Jianyu

463

Review article Automated monitoring of greenhouse crops  

E-Print Network (OSTI)

of the greenhouse. Most of these sensors, such as thermistors and light meters, are reli- able, inexpensive, readilyReview article Automated monitoring of greenhouse crops David L. EHRETa*, Anthony LAUb, Shabtai and continuously detect crop stress, water use, growth and nutrition in greenhouse crops. Some of these techniques

Boyer, Edmond

464

Classified Automated Information System Security Program  

Directives, Delegations, and Requirements

To establish uniform requirements, policies, responsibilities, and procedures for the development and implementation of a Department of Energy (DOE) Classified Computer Security Program to ensure the security of classified information in automated data processing (ADP) systems. Cancels DOE O 5637.1. Canceled by DOE O 471.2.

1994-07-15T23:59:59.000Z

465

Safe controllers design for industrial automation systems  

Science Journals Connector (OSTI)

The design of safe industrial controllers is one of the most important domains related to Automation Systems research. To support it, synthesis and analysis techniques are available. Among the analysis techniques, two of the most important are Simulation ... Keywords: Formal verification, Industrial systems behaviour modelling, Real-time systems, Safe controllers, Simulation

José Machado; Eurico Seabra; José C. Campos; Filomena Soares; Celina P. Leão

2011-05-01T23:59:59.000Z

466

Sabbath Day Home Automation: "It's Like Mixing Technology and Religion"  

E-Print Network (OSTI)

We present a qualitative study of 20 American Orthodox Jewish families' use of home automation for religious purposes. These lead users offer insight into real-life, long-term experience with home automation technologies. We discuss how automation was seen by participants to contribute to spiritual experience and how participants oriented to the use of automation as a religious custom. We also discuss the relationship of home automation to family life. We draw design implications for the broader population, including surrender of control as a design resource, home technologies that support long-term goals and lifestyle choices, and respite from technology.

Woodruff, Allison; Foucault, Brooke

2007-01-01T23:59:59.000Z

467

Machine Partitions | Argonne Leadership Computing Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

BG/Q Drivers Status Machine Overview Machine Partitions Torus Network Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Intrepid/Challenger/Surveyor Tukey Eureka / Gadzooks Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Machine Partitions Mira As our production machine, the queues on Mira are very similar to those on our BG/P system Intrepid. In the prod-capability queue, partition sizes of 8192, 12288, 16384, 32768, and 49152 nodes are available. All partitions have a full torus network. The max runtime of jobs submitted to the

468

Dynamic descriptions : steps towards a design machine  

E-Print Network (OSTI)

This thesis questions which would be a valid approach for building design machine aided by computational intelligence capable of generating surprises for their designers-observers. There have been efforts since the 1960s ...

Toulkeridou, Varvara

2010-01-01T23:59:59.000Z

469

Sandia National Laboratories: Contact Z-Machine  

NLE Websites -- All DOE Office Websites (Extended Search)

About Z Z Research Z News Contact Us Facebook Twitter YouTube Flickr RSS Z-Machine Contact Z For more information, please contact us. * Items are Required First Name * Last Name *...

470

Combined Painting Robot and Spray Painting Machine  

Science Journals Connector (OSTI)

The new Ven Spray Vario is the first system of its kind to combine an anthropomorphic robot with a spray painting machine. The system, which has been ... , brings together the flexibility of an industrial painting

2013-03-01T23:59:59.000Z

471

Machining and Technical Services Service Request Form  

E-Print Network (OSTI)

Machining and Technical Services Service Request Form Clemson University - College of Engineering $35 $60 $55 $90 $52.50 $82.50 Total Labor EDM Hours Outside Hours Outside EDM Hours Priority -

Duchowski, Andrew T.

472

Machining and Technical Services Service Request Form  

E-Print Network (OSTI)

Machining and Technical Services Service Request Form 2010-2011 Clemson University - College: Hours Price per hour Amount $35 $60 $55 $90 $52.50 $82.50 Total Labor EDM Hours Outside Hours Outside EDM Hours Priority -

Duchowski, Andrew T.

473

Seattle City Light- Vending Machine Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

Seattle City Light offers qualifying customers $80 rebates for the purchase of VendingMiser Energy Efficient Vending Machines. VendingMiser reduces the energy consumption of cold drink vending...

474

March 8, 2006: Sandia's Z Machine  

Energy.gov (U.S. Department of Energy (DOE))

March 8, 2006The Department's Sandia National Laboratories announces that its Z machine has produced plasmas that exceed temperatures of 2 billion degrees Kelvin-hotter than the interiors of stars....

475

Improving Statistical Machine Translation with monolingual collocation  

Science Journals Connector (OSTI)

This paper proposes to use monolingual collocations to improve Statistical Machine Translation (SMT). We make use of the collocation probabilities, which are estimated from monolingual corpora, in two aspects, namely improving word alignment for various ...

Zhanyi Liu; Haifeng Wang; Hua Wu; Sheng Li

2010-07-01T23:59:59.000Z

476

Use of virtual machines in information systems  

E-Print Network (OSTI)

This paper presents a scheme using the virtual machine concept for creating: 1) An environment for increasing the effectiveness of researchers who must use analytical, modeling systems and have complex data management ...

Donovan, John J.

1975-01-01T23:59:59.000Z

477

Measure Transformer Semantics for Bayesian Machine Learning  

E-Print Network (OSTI)

Measure Transformer Semantics for Bayesian Machine Learning Johannes Borgstr¨om1, Andrew D. Gordon1 define combinators for measure transformers, based on theorems in measure theory, and use these to give

Plotkin, Joshua B.

478

Teleportation using continuous variable quantum cloning machine  

E-Print Network (OSTI)

We show that an unknown quantum state in phase space can be teleported via three-mode entanglement generated by continuous variable quantum cloning machine (transformation). Further, proceeding with our teleportation protocol we are able to improve the fidelity of teleportation obtained by Loock et.al. [Phys.Rev.Lett. 84, 3482(2000)]. Also we study here the entanglement between the two output copies from cloning machine.

Satyabrata Adhikari

2008-02-15T23:59:59.000Z

479

Method of fabricating a micro machine  

DOE Patents (OSTI)

A micro machine may be in or less than the micrometer domain. The micro machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft is operable to be driven by the micro actuator. A tool is coupled to the micro shaft and is operable to perform work in response to at least motion of the micro shaft.

Stalford, Harold L

2014-11-11T23:59:59.000Z

480

Machine Learning for Precise Quantum Measurement  

E-Print Network (OSTI)

Adaptive feedback schemes are promising for quantum-enhanced measurements yet are complicated to design. Machine learning can autonomously generate algorithms in a classical setting. Here we adapt machine learning for quantum information and use our framework to generate autonomous adaptive feedback schemes for quantum measurement. In particular our approach replaces guesswork in quantum measurement by a logical, fully-automatic, programmable routine. We show that our method yields schemes that outperform the best known adaptive scheme for interferometric phase estimation.

Alexander Hentschel; Barry C. Sanders

2009-10-05T23:59:59.000Z

Note: This page contains sample records for the topic "automated teller machines" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

this version: May 13, 2011 A semantic virtual machine  

E-Print Network (OSTI)

this version: May 13, 2011 A semantic virtual machine Arnold Neumaier Peter Schodl Fakult¨at f://www.mat.univie.ac.at/neum/FMathL Abstract A semantic virtual machine (SVM) is a variant of a programable register machine that combines the transparency and simplicity of the action of a Turing machine with a clearly arranged assembler

Neumaier, Arnold

482

MACHINE LEARNING IN A DYNAMIC WORLD Panel Dmussion  

E-Print Network (OSTI)

MACHINE LEARNING IN A DYNAMIC WORLD Panel Dmussion Miecsyslaw M. Kohr Panel O&m and Editor. Michal~gi,George Mason University R.S.Sutton, GTE Laboratories Machine Learning was established of machine learning research was in Cybernetic Systems and Adaptive Control. Machine Learning has been

Antsaklis, Panos

483

Use of a Machine Control & Guidance System Determination of Performance  

E-Print Network (OSTI)

1 Use of a Machine Control & Guidance System Determination of Performance Protection against. Dr. P. Rausch Why Machine Guidance? 1 Introduction Machine Guidance allows higher performance. Higher someone checking down below: 09.07.2008 3 ,,Machine control by shout and gesture". Planned Excavator Job

484

On-Line Machine Covering Yossi Azar1  

E-Print Network (OSTI)

On-Line Machine Covering Yossi Azar1 ,Leah Epstein2 1 Dept. of Computer Science, Tel of scheduling a sequence of jobs to m parallel machines as to maximize the minimum load over the machines. This situation corresponds to a case that a system which consists of the m machines is alive (i.e. productive

Azar, Yossi

485

Machine Shop Safety Tips & Safety Guidelines GENERAL SAFETY TIPS  

E-Print Network (OSTI)

Machine Shop Safety Tips & Safety Guidelines GENERAL SAFETY TIPS · Safety glasses with side shields distance away from moving machine parts, work pieces, and cutters. · Use hand tools for their designed to oil, clean, adjust, or repair any machine while it is running. Stop the machine and lock the power

Veiga, Pedro Manuel Barbosa

486

Semantic Turing machines Arnold Neumaier and Peter Schodl  

E-Print Network (OSTI)

Semantic Turing machines Arnold Neumaier and Peter Schodl Fakultät für Mathematik, Universität Wien be analyzed and proved correct. The classical Turing machine (TM) could be used, but is too inconvenient. This paper introduces a semantic Turing machine (STM), a kind of register machine that combines

Neumaier, Arnold

487

Computing the Recursive Truth Predicate on Ordinal Register Machines  

E-Print Network (OSTI)

Computing the Recursive Truth Predicate on Ordinal Register Machines Peter Koepke1 and Ryan Siders2- storing register machine. This brings us closer to "minimal" computation of set theoretic con from the machine or programming languge. These machines were designed to define and study run

Koepke, Peter

488

Tree representations via ordinal machines Philipp Schlicht and Benjamin Seyfferth  

E-Print Network (OSTI)

a subset of 1 2. Similar studies have been carried out for infinite time register machines (ITRMs), whose, we deal with machines that utilize a tape of length and either stop in less than many steps with ordinal Turing machines #12;(OTMs), the machine model introduced in [7]. Let us briefly review the basic

Schlicht, Philipp

489

Advantages of an Automated Chemical Processor for XAFS Analysis of Novel Materials  

Science Journals Connector (OSTI)

For synthetic chemists and material scientists XAFS analysis is typically used after promising samples have already been identified. This is not an inherent limitation of the technique which can be applied in a crude fashion quite rapidly but is rather an artifact of the separation of laboratory from synchrotron and of the nature of the allocation of beam time. One way around these difficulties is to use automated chemical processors; preferably with identical machines at the home institution and at the beamline. This allows identical samples to be synthesized on demand in both locations so that the characterization resources of the home institution’s laboratory can be applied immediately to samples synthesized at the beamline. In addition the processor can be run in a combinatorial mode so that the XAFS of many possible synthesis results are examined in a short time. Finally spectra possessing features of interest can be identified by software and those syntheses singled out for further study.

S. Calvin; E. E. Carpenter

2007-01-01T23:59:59.000Z

490

12. Turing Machines/Combinations of ffl We claimed that Turing machines are a formal model of  

E-Print Network (OSTI)

12. Turing Machines/Combinations of ffl We claimed that Turing machines are a formal model existed or can ever be built. ffl This lecture justifies this claim by showing how complex machines can will further justify the claim by showing that attempts to generalize Turing machines do not lead to more

Golin, Mordecai J.

491

Machine plumbness criteria: Interim technology release  

SciTech Connect

The objective of this technology release is to define the maximum allowable deviation from plumb of the centrifuge machine and to recommend machine installation techniques to achieve the specified criteria. The centrifuge feature used as a reference for plumbness is the casing centerline as defined by a line drawn between the theoretical centers of the top and bottom flange faces. In practice, this measurement is accomplished by using specified casing flange diameters or bolt patterns as the reference points. The criterion adopted for GCEP is that each machine shall be plumb within 0.5 in. over the length of the casing as initially installed. Over a long period of time the plumbness is allowed to degrade to 1.0 in. This standard should be achievable using the currently planned installation techniques and within a time limit consistent with GCEP operational objectives. For development testing, centrifuge machines are meticulously adjusted using a plumb bob to achieve a plumbness with 1/8 in. About one to two days are required to complete the installation. This level of effort is justified for a development machine especially where baseline data is being gathered. A more reasonable standard with a corresponding reduction in installation time is required for GCEP. The specified criteria of 0.5 in. maximum out-of-plumb at time of installation and 1.0 in., ultimate, are believed to be a reasonable compromise. Machine design features or operating modes that are dependent on vertical alignment were examined to assess the impact of the selected plumbness criteria. Machine performance and design requirements are defined in the applicable technology release documents.

Not Available

1987-06-01T23:59:59.000Z

492

Machine Maintenance Integrated Performance Support System  

SciTech Connect

The objectives of this partnership project were to develop a preventive maintenance checklist program, a troubleshooting system for the Vertical Turning Center (VTC)-5, an on-line manual, and to integrate these components with a custom browser that would run on the VTC-5 machine's controller and would support future internet/intranet delivery. Kingsbury provided subject matter experts from engineering, manufacturing, and technical support. They also provided photographs, schematics, and CAD drawings, which AlliedSignal Federal Manufacturing and Technologies (ASFM and T) digitized for use in the final program. Information from The Kingsbury troubleshooting experts were interviewed regarding symptoms and root causes of system malfunctions This knowledge was captured and from it, fault trees were developed. These trees were then incorporated into the EPSS as a troubleshooting tool. The troubleshooting portion of the system presents simple questions to the machine operator in order to determine the likely cause or causes of malfunctions and then recommends systematic corrective actions. The on-line reference manual, covering operations and maintenance, provides text and illustrations to the machine operator in a traditional structure, but additionally offers the capability to search voluminous amounts of technical data and retrieve specific information on request. The maintenance portion of the EPSS includes checklists that are displayed daily, weekly, monthly, and annually, as appropriate, on the VTC-5 controller screen. The controller software is unavailable for machining parts until the machine tool operator goes through and checks off all of the checklist items. This project provided the team with a detailed understanding of the knowledge and information required to produce and support advanced machine tools. In addition, it resulted in the design and construction of a prototype VTC-5 EPSS containing all the logic and interfaces necessary to integrate operations and maintenance information from other Kingsbury machine tools.

Bohley, M.C.; Schwartz, M.E.

1998-03-11T23:59:59.000Z

493

Resilient Machines Through Continuous Self-Modeling  

Science Journals Connector (OSTI)

...000 internal model simulations) and the same...robot reinitiates modeling at this point using the...autonomous self-modeling has been suggested...parametric self-modeling. This suggests...24), and even automated science (27). This...feedback during rapid and complex motion...

Josh Bongard; Victor Zykov; Hod Lipson

2006-11-17T23:59:59.000Z

494

T-Mobile and Sierra Wireless agree cooperation in machine-to-machine Sep 01, 2009  

E-Print Network (OSTI)

T-Mobile and Sierra Wireless agree cooperation in machine-to-machine field Sep 01, 2009 · Cooperation intended to achieve further market development with quickly-usable solutions T-Mobile und Sierra their strategic cooperation. The aim is to develop joint portfolios of solutions for the growing M2M (mobile

Deutschmann, Rainer

495

Energy efficient wireless unicast routing alternatives for machine-to-machine networks  

E-Print Network (OSTI)

Review Energy efficient wireless unicast routing alternatives for machine-to-machine networks Neyre into shortest-path based energy-efficient routing alternatives to provide a reference for system designers. Next, a detailed account of energy-efficient unicast routing alternatives, with a particular focus

Uysal-Biyikoglu, Elif

496

DAVIC - Distributed Energy Automation via Implicit Communication  

NLE Websites -- All DOE Office Websites (Extended Search)

DAVIC - Distributed Energy Automation via Implicit Communication DAVIC - Distributed Energy Automation via Implicit Communication Speaker(s): Peter Palensky Date: January 22, 2008 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Peng Xu The electricity grid is seen as a wide-area distributed process, determined by its sub-processes - in our case the loads and distributed generation. Network-based coordination needs to be done very carefully and properly timed to avoid instabilities. Luckily, every point of the grid has the same grid frequency and the same time. Integrating these two trivial things (implicit communication) into one consistent communication model might complement a low-quality (explicit) best-effort communication channel (e.g. Internet, GPRS) for real time applications. A simulation shall clarify how

497

home automation | OpenEI Community  

Open Energy Info (EERE)

91 91 Varnish cache server Home Groups Community Central Green Button Applications Developer Utility Rate FRED: FRee Energy Database More Public Groups Private Groups Features Groups Blog posts Content Stream Documents Discussions Polls Q & A Events Notices My stuff Energy blogs 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142285591 Varnish cache server home automation Home Graham7781's picture Submitted by Graham7781(2002) Super contributor 23 January, 2013 - 13:57 The Consumer Electronics Show round-up CES electronics home automation Las Vegas OpenEI Smart Grid Every January, Las Vegas hosts the Consumer Electronics Show. The CES is the world's largest technology-related trade show. The highlights of this year's show were OLED TVs, ultra-thin laptops,

498

Definition: Automated Voltage Regulators | Open Energy Information  

Open Energy Info (EERE)

Regulators Regulators Jump to: navigation, search Dictionary.png Automated Voltage Regulators Voltage regulators are transformers that can increase or decrease the voltage on a distribution circuit to help keep the voltage within a pre-determined band. Unlike capacitor banks, voltage regulators cannot adjust power factor. These devices typically monitor the voltage at the location where they are connected, and compare it to a programmed set point. If the voltage deviates too far from the set point, the voltage regulator can increase or decrease its output voltage by moving the tap on the secondary side up or down. An automated voltage regulator can operate with remote control signals, or in concert with other area voltage control devices, to help regulate distribution voltage in a coordinated fashion.

499

Automating the development of EBS messages  

SciTech Connect

The State of New Hampshire (NH) had consistently received ARCAs for EBS messages over the years. Unfortunately, NH received a deficiency for information content of an Emergency Broadcast System (EBS) message during the 1993 Vermont Yankee exercise. The easy answer was to conduct training and pass the remedial. However, that would not have solved the problem of too much information to tailor in too little time. NH isn`t the only one with this problem, as evidenced by the 34 deficiencies due to incomplete, inaccurate or late EBS messages from 1991-1993 (1994 data not available at the time this paper was written.) EBS messages account for 46% of all deficiencies according to FEMA. Automation was the real solution. This paper details the development of a computer model that automates the development of EBS messages.

O`Hare, M.J. [Earth Tech., Alexandria, VA (United States); DeLucca, D.

1995-12-31T23:59:59.000Z

500

Automated diagnostic kiosk for diagnosing diseases  

DOE Patents (OSTI)

An automated and autonomous diagnostic apparatus that is capable of dispensing collection vials and collections kits to users interesting in collecting a biological sample and submitting their collected sample contained within a collection vial into the apparatus for automated diagnostic services. The user communicates with the apparatus through a touch-screen monitor. A user is able to enter personnel information into the apparatus including medical history, insurance information, co-payment, and answer a series of questions regarding their illness, which is used to determine the assay most likely to yield a positive result. Remotely-located physicians can communicate with users of the apparatus using video tele-medicine and request specific assays to be performed. The apparatus archives submitted samples for additional testing. Users may receive their assay results electronically. Users may allow the uploading of their diagnoses into a central databank for disease surveillance purposes.

Regan, John Frederick; Birch, James Michael

2014-02-11T23:59:59.000Z