Powered by Deep Web Technologies
Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Mailing Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Mailing Services Mailing Services Use the form below to add your name to the Depleted UF6 Mailing List. First Name: Last Name: Organization: Address: City: State: Postal Code:...

2

Metered Mail Form International Mail Only  

E-Print Network (OSTI)

Metered Mail Form International Mail Only Charge to Department USPS First Class Mail International International Metered Mail Form and must be kept separate from all other domestic mail. · International mail

Palmeri, Thomas

3

Tobias Maile  

NLE Websites -- All DOE Office Websites (Extended Search)

Tobias Maile Tobias Maile 1 Cyclotron Road MS 90R3111 Berkeley CA 94720 (510) 486-5961 TMaile@lbl.gov This publications database is an ongoing project, and not all Division publications are represented here yet. Publications 2013 O'Donnell, James, Tobias Maile, Cody Rose, Natasa Mrazovic, Elmer Morrissey, Cynthia Regnier, Kristen Parrish, and Vladimir Bazjanac. Transforming BIM to BEM: Generation of Building Geometry for the NASA Ames Sustainability Base BIM., 2013. Download: PDF (2.98 MB) 2012 Maile, Tobias, Mangesh Basarkar, James O'Donnell, Philip Haves, and Kevin Settlemyer. "Mapping Hvac Systems for Simulation In EnergyPlus." In SimBuild 2012 IBPSA Conference. Madison, WI, USA, 2012. Download: PDF (1.24 MB) 2011 Maile, Tobias, Vladimir Bazjanac, James O'Donnell, and Matthew Garr. "A

4

Metered Mail Form Domestic Mail Only  

E-Print Network (OSTI)

Metered Mail Form Domestic Mail Only For USPS Mail Only Charge to Department First Class Mail Media Meter Form. · All outgoing USPS Mail that needs postage should be kept separate from all other mail already be sealed prior to being metered. Failure to properly seal this type of mail could result

Palmeri, Thomas

5

Via Mail:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2009 1, 2009 Via email: GC-62@hq.doe.gov Via Mail: Office of the Assistant General Counsel for Technology Transfer and Intellectual Property U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 ATTN: TECHNOLOGY TRANSFER QUESTIONS Dear Sir or Madam: This letter is in response to the Notice of Inquiry: Technology Transfer Practices at Department of Energy ("DOE") Laboratories. (Federal Register Vol. 73, No. 229, p. 72036). The following comments are respectfully submitted on behalf of Eastman Chemical Company ("Eastman"). Eastman is a global FORTUNE 500 company with 2007 sales of $6.8 billion and approximately

6

TMS: Mailing List Rentals  

Science Conference Proceedings (OSTI)

List your company in the TMS directory [MORE] ... Through utilizing a TMS mailing list, your organization can reach over 10,000 professionals within the minerals...

7

pine (mail utility info)  

NLE Websites -- All DOE Office Websites (Extended Search)

pine (mail utility info) pine (mail utility info) Basics, FAQ, etc, On our UNIX machines, module load pine The line module load pine should ALSO be in the file ~/.rc/user_modules (The pine module also includes pico) pine usage with IMAP4 (UNIX) Moving pine email files into IMAP4 LBNL UNIX info on pine links to Pine Information Center Pine 4.2.1/Solaris: Forwarding as attachment; the following procedure has proved successful for at least some users: Check the option "enable-full-header-cmd". To get to this option, 1. M (Main Menu) 2. S (Setup) "Choose a setup task from the menu below :" 3. C (Configure) 4. Scroll down to "Advanced Command Preferences", and press "X" to set "enable-full-header-cmd". It looks like this: ================================================================

8

Building Technologies Office: Distributed Intelligent-Automated...  

NLE Websites -- All DOE Office Websites (Extended Search)

Distributed Intelligent-Automated Demand Response Building Management System Research Project to someone by E-mail Share Building Technologies Office: Distributed...

9

PMP2000: Mailing List Form  

Science Conference Proceedings (OSTI)

Name. Title. Organization. Street/P.O. Box. City. State/Province. Zip/Postal Code. Country. Telephone. Fax. E-Mail Address...

10

Test Automation Test Automation  

E-Print Network (OSTI)

Test Automation Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2013 Mousavi: Test Automation #12;Test Automation Outline Test Automation Mousavi: Test Automation #12;Test Automation Why? Challenges of Manual Testing Test-case design: Choosing inputs

Mousavi, Mohammad

11

UTC e-mail | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

UTC e-mail UTC e-mail Fuel Cells in the QTR UTC e-mail More Documents & Publications Air Products Hydrogen Energy Systems Fuel Cell and Hydrogen Energy Association...

12

CPEP products and Mailing List  

NLE Websites -- All DOE Office Websites (Extended Search)

CPEP es una organización sin fines de lucro formada por profesores, CPEP es una organización sin fines de lucro formada por profesores, educadores, y físicos. Los materiales preparados por el CPEP presentan los conocimientos actuales sobre la naturaleza fundamental de la materia y la energía, incorporando los principales descubrimientos e investigaciones de las tres últimas décadas. Los productos desarrollados por el CPEP están disponibles por intermedio de nuestro distribuidor: Science Kit 777 Park Drive Tonawanda, NY 14150 USA Phone: 1(800)828-7777 or 1(716)874-6020 FAX: 1(716)874-9572 Para obtener información (sin efectuar una orden de compra) o para ser incorporado en nuestra lista de correo dirigirse a: E-mail: pdg@lbl.gov or Call: 1(510)486-5885, or Write: CPEP MS 50-308, Lawrence Berkeley National Laboratory,

13

First Responder Portal  

Science Conference Proceedings (OSTI)

... more. >> see all First Responder programs and projects ... *. Bookmark and Share. photo of fire testing with NYC Fire Dept. ...

2013-04-18T23:59:59.000Z

14

Mail and Distribution | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Facility Operations Food Services Graphics Mail and Distribution Parking and Garage Photography Printing Recycling Safety and Health Shuttle Bus and Couriers Supply...

15

Field Facilities Contacts for Printing and Mail  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Facilities Contacts for Printing and Mail Facilities Contacts for Printing and Mail Print and Mail Contacts Site Printing Contact Mail Contact NNSA, Albuquerque Deborah Miller (505) 845-6049 Thomas H. Clinkenbeard NNSA Service Center PO Box 5400 Albuquerque, NM 87185-5400 (505) 845-4602 tclinkenbeard@doeal.gov (mailto:tclinkenbeard@doeal.gov) Argonne National Laboratory Doreen Schoening Argonne National Laboratory U.S. Department of Energy 9700 South Cass Avenue Blvd 340 Lemonmt, IL 60439 (630) 840-6399 dschoening@anl.gov (mailto:dschoening@anl.gov) Bechtel Jacobs James Hughes Bechtel Jacobs - Mail Stop 7294 U.S. Department of Energy PO Box 4699 Oak Ridge, TN 37831 (865) 576-8423 Berkeley Site Office Mercedes Downing Berkeley Site Office U.S. Department of Energy 1 Cyclotron Road Bldg 90

16

Special Mailing Distribution Lists | Staff Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Special Mailing Distribution Lists Special Mailing Distribution Lists Special mailing distribution lists -- to be used repeatedly over long periods of time -- may be established by written request to the Senior Communications Clerk, at mailroomdl@bnl.gov. It is important to notify the Senior Communications Clerk of all changes to the Mailing Distribution Lists. Assignments to all other Standard Distribution Lists are made automatically according to each employee's personnel code. Deletions resulting from terminations are effected automatically. The Mail Room maintains an automatic addressing system for the following Standard Distribution Lists: Director's Office; Department Chairs and Division Managers and their Deputies, Associate, Assistant and Acting Chairs; Division and major Section Heads in the Departments and Divisions; BSA Board of Directors.

17

*Corresponding author. E-mail address: agagroup@olympus.ece.jhu.edu (A.G. Andreou).  

E-Print Network (OSTI)

*Corresponding author. E-mail address: agagroup@olympus.ece.jhu.edu (A.G. Andreou). This research and Computer Engineering, The Johns Hopkins University, 3400 N. Charles Street, Baltimore, MD 21211, USA contains eight photoreceptors which receive light through a facet lens and respond in graded fashion

Maryland at College Park, University of

18

Unsubscribe from the Depleted UF6 E-mail List  

NLE Websites -- All DOE Office Websites (Extended Search)

Services Unsubscribe Unsubscribe from the Depleted UF6 E-mail List This form allows you to remove yourself from the Depleted UF6 e-mail list. Type your e-mail address here:...

19

Almo Corporation, Respondent  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Almo Corporation, Almo Corporation, Respondent Issued: July 25, 2012 BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 20 12-CE-1416 By the General Counsel, U.S. Depatiment of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department ofEnergy ("DOE") and Almo Corporation ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requjrements located at ,10 C.F.R. § 429.12. 2. The DOE and Respondent have negotiated the tmms of the Compmmise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

20

Minutes from the Print and Mail Managers Exchange Forum Teleconferences |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Minutes from the Print and Mail Managers Exchange Forum Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences. Contact the Office of Administrative Management and Support at (202) 586-4318 with any questions. Last updated 04/01/13 Minutes from the March 14, 2013 Printing and Mail Teleconference Minutes from the January 10, 2013 Printing and Mail Teleconference Minutes from the November 01, 2012 Printing and Mail Teleconference Minutes from the June 28, 2012 Printing and Mail Teleconference Minutes from the May 03, 2012 Printing and Mail Teleconference Minutes from the February 23, 2012 Printing and Mail Teleconference Minutes from the October 26, 2011 Printing and Mail Teleconference

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

MIME Extensions for Mail-Enabled Applications: application/Safe-Tcl and multipart/enabled-mail  

E-Print Network (OSTI)

MIME [RFC-MIME] defines a format and general framework for the representation of a wide variety of data types in Internet mail. This document defines two new subtypes of MIME data, the application/Safe-Tcl and multipart/enabled-mail subtypes, for providing Enabled Mail [EM-MODEL] in the Internet community. A table of contents appears at the end of this document. 1. Overview Most electronic mail, even multimedia mail as standardized in MIME [RFC-MIME], is "passive" in the sense that the data are unidirectional. Textual, image, audio, or video data are simply displayed to the user, who reads, views, listens, or watches it and then must take specific action to initiate any response to the data, such as to reply to the originator, to replay the data, or to redistribute it to other recipients. Less commonly used, but the subject of considerable research attention, has been "active" mail, in which the data delivered through the mail constitute a program in a well-specified language, allowi...

Nathaniel Borenstein; Nathaniel Borenstein Bellcore

1993-01-01T23:59:59.000Z

22

Automation Status  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL Manufacturing R&D Workshop NREL Manufacturing R&D Workshop NREL H2/FC Manufacturing R&D Workshop Automation Status Garry Sperrick garry@sperkllc.com 585-259-0311 August 11, 2011 Automation Status NREL Manufacturing R&D Workshop Presentation Overview ƒ Brief Introduction ƒ DOE / NREL - Review & Discussion ƒ Automation Platforms ƒ Automation Processes ƒ Automation Considerations of the Manufacturer ƒ Manufacturer and the Supplier ƒ Three (3) Automation Programs Following these Guidelines ƒ Automotive Component Manufacturing ƒ Medical Manufacturing ƒ Membrane Electrode Assembly Manufacturing ƒ Hypothetical Fuel Cell Manufacturing Platforms August 11, 2011 Automation Status NREL Manufacturing R&D Workshop Professional Bio ƒ Automation Technician - Mobil Chemical

23

Home Automation  

E-Print Network (OSTI)

In this paper I briefly discuss the importance of home automation system. Going in to the details I briefly present a real time designed and implemented software and hardware oriented house automation research project, capable of automating house's electricity and providing a security system to detect the presence of unexpected behavior.

Ahmed, Zeeshan

2010-01-01T23:59:59.000Z

24

Minutes from the January 10, 2013 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 10, 2013 January 10, 2013 Mail discussion Al Majors opened the meeting by discussing the Mail Management Report and latest update on status. One final report is yet to be submitted, after which close out will be accomplished. Copies will be provided to the Mail Managers once completed. Al introduced Derrick Miliner, Program Manager from the General Services Administration, Office of Government-wide Policy, and acknowledged Mr. Miliner's role in completing the Mail Management Report. Mail Security Plans A number of unclassified site specific mail security plans have been received. Requirement for classified site specific mail security plans is to submit a letter or email stating that the classified plan is in place. Mail Manager Change Notification to Headquarters

25

Minutes from the June 28, 2012 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 28, 2012 Mail discussion Al Majors opened the meeting by introducing United Parcel Service (UPS) Representative Shelly Scott. Ms. Scott's contact information is: Shelly Scott shellyscott@ups.com 404 402-9827 (cell) Ms. Scott discussed issues relating to various UPS services available to the department. Next Al introduced Michael R. Sanders, President and Chief Executive Officer of Intra-Mail Network, an innovative, information Technology Company that improves the delivery of mail or email to individuals at institutions. Mr. Sanders provided an overview of services and capabilities available to help eliminate mailing-related problems. DOE Headquarters Mail Center is currently conducting a mailing list clean up (pilot) with Intra-Mail Network to eliminate the unwanted incoming junk mail addressed to Headquarters

26

Intraorganizational Versus Interorganizational Uses and Benefits of Electronic Mail  

Science Conference Proceedings (OSTI)

The success of an organization depends on rapid, reliable, and direct communications within the organization and with the outside world. To determine if electronic mail e-mail provides a competitive benefit, a sample of 99 management-level participants ...

Denise J. McManus; Chetan Sankar; Houston H. Carr; F. Nelson Ford

2002-07-01T23:59:59.000Z

27

Simulation-based optimization of a complex mail transportation network  

Science Conference Proceedings (OSTI)

The Swedish Postal Services receives and distributes over 22 million pieces of mail every day. Mail transportation takes place overnight by airplanes, trains, trucks, and cars in a transportation network comprising a huge number of possible routes. For ...

Anna Syberfeldt; Henrik Grimm; Amos Ng; Martin Andersson; Ingemar Karlsson

2008-12-01T23:59:59.000Z

28

arXiv.org - Mailings from the physics archive  

NLE Websites -- All DOE Office Websites (Extended Search)

Mailings from the physics archive Submissions to the new physics archive and the reorganized cond-mat archive now include Subj-class: headings . It is possible to receive mailings...

29

Test Automation Ant JUnit Test Automation  

E-Print Network (OSTI)

Test Automation Ant JUnit Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2012 Mousavi: Test Automation #12;Test Automation Ant JUnit Outline Test Automation Ant JUnit Mousavi: Test Automation #12;Test Automation Ant JUnit Why? Challenges of Manual Testing

Mousavi, Mohammad

30

First Responder Initial Response Procedure  

Energy.gov (U.S. Department of Energy (DOE))

The purpose of this response flow chart is to provide first responders with guidance for response to a transportation accident involving radioactive material.

31

Minutes from the Print and Mail Managers Exchange Forum Teleconference...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Mail Teleconference More Documents & Publications Identification and Prioritization of Technical Issues July 19, 2012 SEAB Minutes Lessons Learned Quarterly Report, March 2013...

32

Data-Driven Mailing Helps Heat Up Untapped Seattle Market  

NLE Websites -- All DOE Office Websites (Extended Search)

Focus Series Focus Series Data-Driven Mailing Helps Heat Up Untapped Seattle Market Recognizing owners of oil-heated homes in Seattle, Washington, as a long-untapped market, Community Power Works engaged them through a direct mail campaign in April 2012. Not only did the mailing generate hundreds of sign-ups, but the number of oil-heated homes initiating upgrades increased to 50% in the six months after the mailing. In the interview below, Community Power Works Project Manager Ruth Bell and Program/System Analyst Vince Schueler of the Washington State University (WSU) Energy Program 1 provide a summary of the successes and lessons learned. Following the interview is an example letter used by Community Power Works in its direct mail outreach. Q. Why focus on oil-heated homes in Seattle?

33

LANL responds to radiological incident  

NLE Websites -- All DOE Office Websites (Extended Search)

LANL responds to radiological incident LANL responds to radiological incident LANL responds to radiological incident Multiple tests indicate no health risks to public or employees. August 27, 2012 Aerial view of the Los Alamos Neutron Science Center(LANSCE). Aerial view of the Los Alamos Neutron Science Center (LANSCE). The contamination poses no danger to the public. The Laboratory is investigating the inadvertent spread of Technetium 99 by employees and contractors at the Lujan Neutron Scattering Center August 27, 2012-The Laboratory is investigating the inadvertent spread of Technetium 99 by employees and contractors at the Lujan Neutron Scattering Center at the Los Alamos Neutron Science Center (LANSCE), a multidisciplinary accelerator facility used for both civilian and national security research. The Laboratory has determined that about a dozen people

34

Security Automation Conference & Workshop  

Science Conference Proceedings (OSTI)

... Security Automation Conference & Workshop. ... Richard Hale, DISA - Information Security & Security Automation in DoD (coming soon); ...

35

Minutes from the May 26, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

26, 2010 26, 2010 Printing and Mail Managers Exchange Forum Teleconference Seventeen individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the FY 2010, Congressional Joint Committee on Printing Commercial Printing Report "JCP Form No. 2" Dallas Woodruff, Headquarters informed the group that Headquarters received responses from all DOE printing and duplicating facilities. The report is due to the Congressional Joint Committee on Printing no later than May 31, 2010.

36

Automated dispenser  

DOE Patents (OSTI)

An automated dispenser having a conventional pipette attached to an actuating cylinder through a flexible cable for delivering precise quantities of a liquid through commands from remotely located computer software. The travel of the flexible cable is controlled by adjustable stops and a locking shaft. The pipette can be positioned manually or by the hands of a robot. 1 fig.

Hollen, R.M.; Stalnaker, N.D.

1989-04-06T23:59:59.000Z

37

Headquarters Program & Staff Office Mailing Addresses | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Headquarters Program & Staff Office Mailing Headquarters Program & Staff Office Mailing Addresses Headquarters Program & Staff Office Mailing Addresses The following addresses are for delivery of regular mail and small packages: Delivery to the Headquarters buildings in Washington, DC: Name of Individual Title Routing Symbol/Forrestal Building U.S. Department of Energy 1000 Independence Ave., S.W. Washington, DC 20585 Name of Individual Title Routing Symbol/L'Enfant Plaza Building U.S. Department of Energy 1000 Independence Ave., S.W. Washington, DC 20585-1615 Delivery to the Headquarters buildings in Germantown, MD: Name of Individual Title Routing Symbol/Germantown Building U.S. Department of Energy 1000 Independence Ave., S.W. Washington, DC 20585-1290 Name of Individual Title Routing Symbol/Cloverleaf Building

38

Minutes from the September 15, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 15, 2010 Printing and Mail Managers Exchange Forum Teleconference September 15, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-four individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Upcoming FY 2010 Department-wide Three-Year Plan Dallas Woodruff, Headquarters informed the group that the programmer has been making modifications to the spreadsheets such as the narrative section, equipment installed year, sites data consolidation etc. The enhancement to the narrative section will allow sites to enter data into the four narrative sections, which allow

39

Collaborative spam filtering using e-mail networks  

E-Print Network (OSTI)

program determines that (TTL). the e-mail is de?nitely spam,walk of the same length as the TTL on a short random walklength l, which is the TTL. used in the content implantation

Kong, Joseph S; Rezaei, B A; Sarshar, N; Roychowdhury, V P; Boykin, P O

2006-01-01T23:59:59.000Z

40

Name Title Work Phone Work E-Mail  

NLE Websites -- All DOE Office Websites (Extended Search)

12012 EOTA - STAFF Name Title Work Phone Work E-Mail Melissa Otero Program Manager 505-842-7112 motero@eota.energy.gov Janet Lee Online Learning Support Specialist 505-842-7110...

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Building Technologies Office: Small- and Medium-Sized Building Automation  

NLE Websites -- All DOE Office Websites (Extended Search)

Small- and Medium-Sized Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project to someone by E-mail Share Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Facebook Tweet about Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Twitter Bookmark Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Google Bookmark Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Delicious Rank Building Technologies Office: Small- and Medium-Sized Building

42

T-618: Debian update for exim4: Mail Transport Agent | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

mail transport agent in Debian, uses DKIM data obtain from DNS directly in a format string, potentially allowing malicious mail senders to execute arbitrary code. reference...

43

U-157: Ruby Mail Gem Directory Traversal and Shell Command Injection...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

57: Ruby Mail Gem Directory Traversal and Shell Command Injection Vulnerabilities U-157: Ruby Mail Gem Directory Traversal and Shell Command Injection Vulnerabilities April 27,...

44

Emergency Responder Radioactive Material Quick Reference Sheet...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transportation Emergency Preparedness Program (TEPP) Emergency Responder Radioactive Material Quick Reference Sheet...

45

First Responders | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Responders | National Nuclear Security Administration Responders | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration First Responders Home > About Us > Our Programs > Emergency Response > Responding to Emergencies > First Responders First Responders NNSA's first responders include the Radiological Assistance Program (RAP)

46

Minutes from the November 17, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 17, 2010 November 17, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty seven individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors Comments/Additions to last Months Minutes No comments. Printing Agenda Items......... Update on the Department-wide "Three-Year Plan" Dallas Woodruff, Headquarters opened the meeting by thanking everyone for providing their sites Three-Year Plan data to Headquarters in timely manner. Mr. Woodruff went on to say a number of individuals indentified a problem with the narrative section of the PPAFI Spreadsheets (unable to print the narratives). Mr. Woodruff notified the programmer of the narrative section printing glitch.

47

Mailing Addresses and Information Numbers for Operations, Field, and Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

About Energy.gov » Mailing Addresses and Information Numbers for About Energy.gov » Mailing Addresses and Information Numbers for Operations, Field, and Site Offices Mailing Addresses and Information Numbers for Operations, Field, and Site Offices Name Telephone Number U.S. Department of Energy Ames Site Office 111 TASF, Iowa State University Ames, Iowa 50011 515-294-9557 U.S. Department of Energy Argonne Site Office 9800 S. Cass Avenue Argonne, IL 60439 630-252-2000 U.S. Department of Energy Berkeley Site Office Berkeley National Laboratory 1 Cyclotron Road Berkeley, CA 94720 510-486-5784 U.S. Department of Energy Bonneville Power Administration P.O. Box 3621 905 NE 11th Avenue Portland, OR 97232 Bonneville Power Administration General and Regional Offices 503-230-3000 U.S. Department of Energy Brookhaven Site Office Upton, NY 11973 631-344-5050

48

Minutes from the January 19, 2011 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 2010 January 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors Comments/Additions to last Months Minutes No comments. Printing Agenda Items......... Update on the Department-wide FY-2010 Three-Year Plan Dallas Woodruff, Headquarters in formed the group that the Department-wide Printing and Publishing Activities is currently in the concurrence process. The report is due to congress by February 11, 2011. Mr. Woodruff thanks those that assisted in development of the report and he asked for recommendations on how to make the data submission more users friendly. Mr Woodruff also asked members to share any concern or problems they experienced regarding to using the Excel

49

Minutes from the March 17, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 17, 2010 March 17, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-eight individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Upcoming Congressional Joint Committee on Printing Commercial Printing Report "JCP Form No. 2" Dallas Woodruff, Headquarters informed the group that sites should receive the call letter for the report on or around March 30, 2010. The report is due back to Headquarters by May 3, 2009. Mr. Woodruff reminded the group that they must report negative responses as well.

50

Mailing Addresses for National Laboratories and Technology Centers |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mailing Addresses for National Laboratories and Mailing Addresses for National Laboratories and Technology Centers Mailing Addresses for National Laboratories and Technology Centers Name Telephone Number U.S. Department of Energy Albany Research Center 1450 Queen Ave. SW Albany, OR 97321-2198 541-967-5892 U.S. Department of Energy Ames Laboratory #311 TASF, Iowa State University Ames, Iowa 50011 515-294-2680 U.S. Department of Energy Argonne National Laboratory (East) 9700 S. Cass Avenue Argonne, IL 60439 630-252-2000 U.S. Department of Energy Argonne National Laboratory (West) P.O. Box 2528 Idaho Fall, ID 83403-2528 208-533-7341 U.S. Department of Energy Bettis Atomic Power Laboratory, Bechtel Bettis, Inc. 814 Pittsburgh McKeesport Boulevard West Mifflin, PA 15122-0079 412-476-5000 U.S. Department of Energy

51

Minutes from the January 20, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2010 , 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the Department-wide Printing and Publishing Activities Report Three-Year Plan. Dallas Woodruff, Headquarters thanked the group for their contributions made to the Department-wide printing program during FY 2009. Mr Woodruff also thanked the group for providing data for the FY 2009 Three-Year Plan in a timely manner. The Three-Year Plan is in track for completion before the February

52

LiveMail: personalized avatars for mobile entertainment  

Science Conference Proceedings (OSTI)

LiveMail is a prototype system that allows mobile subscribers to communicate using personalized 3D face models created from images taken by their phone cameras. The user takes a snapshot of someone's face - a friend, famous person, themselves, even a ...

Miran Mosmondor; Tomislav Kosutic; Igor S. Pandzic

2005-06-01T23:59:59.000Z

53

HEART SMART NUTRITION Mailout or E-mail Lesson Series  

E-Print Network (OSTI)

HEART SMART NUTRITION Mailout or E-mail Lesson Series MEMORANDUM TO : County Extension Agents Fellow, Professor and Extension Nutrition Specialist SUBJECT: Lesson Series Heart Smart Nutrition Heart. A county-wide Heart Smart seminar would also be another opportunity to sign up participants for the series

54

You are where you e-mail: using e-mail data to estimate international migration rates  

Science Conference Proceedings (OSTI)

International migration is one of the major determinants of demographic change. Although efforts to produce comparable statistics are underway, estimates of demographic flows are inexistent, outdated, or largely inconsistent, for most countries. We estimate ... Keywords: demographics, e-mail data, migration, mobility

Emilio Zagheni; Ingmar Weber

2012-06-01T23:59:59.000Z

55

Hydrogen Safety Training for First Responders  

Science Conference Proceedings (OSTI)

The use of hydrogen and fuel cell technologies is emerging in the U.S. through vehicle demonstration programs and early deployments of fuel cells for onsite power generation, materials handling, and other applications. To help first responders prepare for hydrogen and fuel cell use in their communities, the U.S. Department of Energy's Fuel Cell Technologies Program has developed hydrogen safety training for first responders. A web-based awareness-level course, 'Introduction to Hydrogen Safety for First Responders,' launched in 2007, is available at http://hydrogen.pnl.gov/FirstResponders/. Approximately 17,000 first responders have accessed the online training.

Fassbender, Linda L.

2011-01-01T23:59:59.000Z

56

The Future of Electric Vehicles and Arizona State University's MAIL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Future of Electric Vehicles and Arizona State University's The Future of Electric Vehicles and Arizona State University's MAIL Battery The Future of Electric Vehicles and Arizona State University's MAIL Battery August 11, 2010 - 4:26pm Addthis Cody Friesen and his team at Arizona State University | Photo Credit Arizona State University Cody Friesen and his team at Arizona State University | Photo Credit Arizona State University Andy Oare Andy Oare Former New Media Strategist, Office of Public Affairs What does this mean for me? EV batteries will have the ability to recharge at least 1000 times at a low cost due to its composition of only domestically-sourced, earth abundant material Electric Vehicles are becoming a reality. Last month, the President got behind the wheel of a Chevy Volt in Michigan, and traveled to Smith

57

Minutes from the March 14, 2013 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 14, 2013 March 14, 2013 Mail discussion Al Majors is on leave today. Ellsworth Howell Jr. and Tony Nellums are sitting for Al. There are no agenda items for the Mail portion. A discussion period for questions, comments, or suggestions was opened without response Printing discussion Discussed suggestions for reducing printing expenses Presidential Executive Order 13589 and reducing hard copy printing in favor of electronic publishing Sec. 5. Printing. Agencies are encouraged to limit the publication and printing of hard copy documents and to presume that information should be provided in an electronic form, whenever practicable, permitted by law, and consistent with applicable records retention requirements. Agencies should consider using acquisition vehicles developed by the

58

Responding to Emergencies | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

radiological accident or incident. Part of NNSA's mission is to protect the public, environment, and emergency responders from both terrorist and non-terrorist events by providing...

59

Operation Vigilant Sample: First Responder Training for ...  

Science Conference Proceedings (OSTI)

... US National Guard on a coordinated effort to train emergency first responders in ... country that serve as the first wave of federal response to domestic ...

2011-08-02T23:59:59.000Z

60

Emergency Responder Radioactive Material Quick Reference Sheet...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

This job aid is a quick reference to assist emergency responders in identifying preliminary safety precautions that should be taken during the initial response phase after arrival...

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Criticality Safety Basics for INL Emergency Responders  

Science Conference Proceedings (OSTI)

This document is a modular self-study guide about criticality safety principles for Idaho National Laboratory emergency responders. This guide provides basic criticality safety information for people who, in response to an emergency, might enter an area that contains much fissionable (or fissile) material. The information should help responders understand unique factors that might be important in responding to a criticality accident or in preventing a criticality accident while responding to a different emergency. This study guide specifically supplements web-based training for firefighters (0INL1226) and includes information for other Idaho National Laboratory first responders. However, the guide audience also includes other first responders such as radiological control personnel. For interested readers, this guide includes clearly marked additional information that will not be included on tests. The additional information includes historical examples (Been there. Done that.), as well as facts and more in-depth information (Did you know ). INL criticality safety personnel revise this guide as needed to reflect program changes, user requests, and better information. Revision 0, issued May 2007, established the basic text. Revision 1 incorporates operation, program, and training changes implemented since 2007. Revision 1 increases focus on first responders because later responders are more likely to have more assistance and guidance from facility personnel and subject matter experts. Revision 1 also completely reorganized the training to better emphasize physical concepts behind the criticality controls that help keep emergency responders safe. The changes are based on and consistent with changes made to course 0INL1226.

Valerie L. Putman

2012-08-01T23:59:59.000Z

62

Automated deduction for verification  

Science Conference Proceedings (OSTI)

Automated deduction uses computation to perform symbolic logical reasoning. It has been a core technology for program verification from the very beginning. Satisfiability solvers for propositional and first-order logic significantly automate the task ...

Natarajan Shankar

2009-10-01T23:59:59.000Z

63

V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets May 2, 2013 - 6:00am Addthis...

64

The Potential For Miscommunication Using E-Mail As A Source Of Communication  

Science Conference Proceedings (OSTI)

The purpose of this study is to explore inherent characteristics and functional uses of electronic mail (e-mail) that may create the possibility of miscommunication and an impoverished medium for conducting successful personal/social interactions.

Vicki P. Rainey

2000-12-01T23:59:59.000Z

65

Making automation work  

Science Conference Proceedings (OSTI)

Today's automated systems provide enormous safety and convenience. However, when glitches, problems, or breakdowns occur, the results can be catastrophic.

Samuel Greengard

2009-12-01T23:59:59.000Z

66

Evolution of industrial automation  

Science Conference Proceedings (OSTI)

Automation has been of high priority for the manufacturing sector, from Ford's first set of Model-T Assembly lines in the early 1920s to the modern factory floor. With appropriate automation, the aim was to rationalise the production and keep ... Keywords: Ethernet, architecture, automated manufacturing, bus topology, control servers, distributed control, economies of scale, embedded intelligence, functionality, fuzzy logic, global village, graphic panel, industrial automation, networking, networks

R. Murugesan

2006-03-01T23:59:59.000Z

67

NIST SP 800-45 Version 2, Guidelines on Electronic Mail ...  

Science Conference Proceedings (OSTI)

Page 1. Special Publication 800-45 Version 2 Guidelines on Electronic Mail Security Recommendations of the National Institute of ...

2012-02-06T23:59:59.000Z

68

Unsolicited Commercial E-Mail: Empirical Analysis of a Digital Commons  

Science Conference Proceedings (OSTI)

Unsolicited commercial e-mail (UCE) is a significant problem of the digital commons, but there has been little empirical analysis of proposed solutions and underlying mechanisms. This study, based on an analysis of 47 million inbound e-mail messages ... Keywords: Attention Endowment, Box-Jenkins, Common-Pool Resource, Digital Commons, E-Mail Marketing, Exclusion, Is Management, Rival, Spam, Time Series, Unsolicited Commercial E-Mail

Nigel Melville; Aaron Stevens; Robert Plice; Oleg Pavlov

2006-06-01T23:59:59.000Z

69

Automated task allocation  

Science Conference Proceedings (OSTI)

The goal of the paradigm shift in Air Traffic Management (ATM) is to increase its overall performance by means of redesigning processes, evolving to a more automated, autonomous and predictable system. Nevertheless, when dealing with automation, it is ... Keywords: ATM, anticipatory, autonomous, centric, compensatory, decision support tools, level of automation, operations research, optimisation, performance metrics, task allocation

Roco Barragn Montes, Eduardo Garca, Francisco Javier Sez Nieto

2013-05-01T23:59:59.000Z

70

Telling the story of older people e-mailing: An ethnographical study  

Science Conference Proceedings (OSTI)

While e-mail is the Internet application most used by older people, very little is known about how they interact with e-mail systems and use them in their daily lives. We undertook a 3-year ethnographical study aimed at revealing and explaining real ... Keywords: Accessibility barriers, E-mail, Ethnography, Interactive experiences, Older people, Real life use

Sergio Sayago; Josep Blat

2010-01-01T23:59:59.000Z

71

Responding to Emergencies | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Responding to Emergencies | National Nuclear Security Administration Responding to Emergencies | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Responding to Emergencies Home > About Us > Our Programs > Emergency Response > Responding to Emergencies Responding to Emergencies emergency response logo NNSA serves as the premier technical leader in

72

Minutes from the February 23, 2012 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Printing and Mail Managers Exchange Forum Teleconference February 23, 2012 Participants: Headquarters (5) National Energy Technology Laboratory, PA National Security Complex Y-12 (2) Oak Ridge National Laboratory Y-12 Site Office (2) Hanford Site Office Oak Ridge Association University Oak Ridge Operations Office BWXT Pantex Site Office JanTec Corporation, Richland, Washington Los Alamos National Laboratory Chicago Office Bettis Atomic Power Laboratory National Security Technology C1, Las Vegas SLAC National Accelerator Laboratory Comments/Additions to minutes from last meeting. There were no comments. Printing Agenda Items......... Update on the Department-wide Printing and Publishing Activities Three-Year Plan (2013-2015).

73

T.: Numerical sequence extraction in handwritten incoming mail documents  

E-Print Network (OSTI)

In this communication, we propose a method for the automatic extraction of numerical fields in handwritten documents. The approach exploits the known syntactic structure of the numerical field to extract, combined with a set of contextual morphological features to find the best label to each connected component. Applying an HMM based syntactic analyzer on the overall document allows to localize/extract fields of interest. Reported results on the extraction of zip codes, phone numbers and customer codes from handwritten incoming mail documents demonstrate the interest of the proposed approach. 1.

G. Koch; L. Heutte; T. Paquet

2003-01-01T23:59:59.000Z

74

Criticality Safety Basics for INL Emergency Responders  

SciTech Connect

This document is a modular self-study guide about criticality safety principles for Idaho National Laboratory emergency responders. This guide provides basic criticality safety information for people who, in response to an emergency, might enter an area that contains much fissionable (or fissile) material. The information should help responders understand unique factors that might be important in responding to a criticality accident or in preventing a criticality accident while responding to a different emergency.

This study guide specifically supplements web-based training for firefighters (0INL1226) and includes information for other Idaho National Laboratory first responders. However, the guide audience also includes other first responders such as radiological control personnel.

For interested readers, this guide includes clearly marked additional information that will not be included on tests. The additional information includes historical examples (Been there. Done that.), as well as facts and more in-depth information (Did you know ).

INL criticality safety personnel revise this guide as needed to reflect program changes, user requests, and better information. Revision 0, issued May 2007, established the basic text. Revision 1 incorporates operation, program, and training changes implemented since 2007. Revision 1 increases focus on first responders because later responders are more likely to have more assistance and guidance from facility personnel and subject matter experts. Revision 1 also completely reorganized the training to better emphasize physical concepts behind the criticality controls that help keep emergency responders safe. The changes are based on and consistent with changes made to course 0INL1226.

Valerie L. Putman

2012-08-01T23:59:59.000Z

75

Hay harvesting services respond to market trends  

E-Print Network (OSTI)

services respond to market trends by Steven Blank, Karenyears, there has been a trend in California from harvesting1,300 pounds or more. This trend is influencing how hay-

Blank, Steven; Klonsky, Karen; Fuller, Kate

2009-01-01T23:59:59.000Z

76

Security Automation Developer Days  

Science Conference Proceedings (OSTI)

... not addressed is the actual distribution of standardized ... 3:30 4:45 Automation Content Repositories ... provide protocols for querying devices as to ...

2012-10-26T23:59:59.000Z

77

CAESAR: Computer Automated Resummations  

E-Print Network (OSTI)

This talk gives a brief discussion of the motivations and principles behind computer automated expert semi-analytical resummation (CAESAR) for QCD final states.

Gavin P. Salam

2004-07-30T23:59:59.000Z

78

U-157: Ruby Mail Gem Directory Traversal and Shell Command Injection  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

57: Ruby Mail Gem Directory Traversal and Shell Command 57: Ruby Mail Gem Directory Traversal and Shell Command Injection Vulnerabilities U-157: Ruby Mail Gem Directory Traversal and Shell Command Injection Vulnerabilities April 27, 2012 - 7:00am Addthis PROBLEM: Ruby Mail Gem Directory Traversal and Shell Command Injection Vulnerabilities PLATFORM: Mail gem for Ruby 2.x ABSTRACT: Some vulnerabilities have been reported in the Mail gem for Ruby, which can be exploited by malicious people to manipulate certain data and compromise a vulnerable system. Reference Links: Secunia Advisory SA48970 CVE-2012-2139 CVE-2012-2140 IMPACT ASSESSMENT: Medium Discussion: Input passed via the "to" parameter within the file delivery method is not properly verified before being used and can be exploited to modify arbitrary files via directory traversal attacks. Certain input passed to

79

Automated Demand Response and Commissioning  

E-Print Network (OSTI)

Fully-Automated Demand Response Test in Large Facilities14in DR systems. Demand Response using HVAC in Commercialof Fully Automated Demand Response in Large Facilities

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-01-01T23:59:59.000Z

80

Introduction to Hydrogen Safety for First Responders  

DOE Green Energy (OSTI)

This article is intended to inform firefighters about a new web-based training course called "Introduction to Hydrogen Safety for First Responders." It provides a very brief overview of the course contents, the web address to access the online course, where to get CDs and hard copies of the course, and who to contact for further information.

Fassbender, Linda L.; Akers, Bret M.; Cooper, Christy

2007-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Automated Demand Response Today  

Science Conference Proceedings (OSTI)

Demand response (DR) has progressed over recent years beyond manual and semi-automated DR to include growing implementation and experience with fully automated demand response (AutoDR). AutoDR has been shown to be of great value over manual and semi-automated DR because it reduces the need for human interactions and decisions, and it increases the speed and reliability of the response. AutoDR, in turn, has evolved into the specification known as OpenADR v1.0 (California Energy Commission, PIER Program, C...

2012-03-29T23:59:59.000Z

82

The EMA system: a CTI based e-mail alerting service  

Science Conference Proceedings (OSTI)

The integration of Internet services and telephony services is a new area for the development of telecommunications services. One example is an e-mail alerting service that uses the telephony network for e-mail notification. The EMA system is a computer ...

D. Frank; H. Lucic; M. Opsenica; L. Puksec; M. Zic; S. Brajkovic; V. Maricic

2000-02-01T23:59:59.000Z

83

Natural Gas Annual Respondent Query System  

Gasoline and Diesel Fuel Update (EIA)

loading new table loading new table Home > Natural Gas > Natural Gas Annual Respondent Query System Natural Gas Annual Respondent Query System (EIA-176 Data through 2012) Report: 176 Natural Gas Deliveries 176 Natural Gas Supply Items 176 Natural Gas Other Disposition Items 176 Type of Operations and Sector Items 176 Continuation Text Lines 176 Company List 191 Field Level Storage Data 757 Processing Capacity 176 Custom Report (User-defined) Years: 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 to 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 Sort by: Area, Company, Item Company, Area, Item Item, Area, Company Company: Show only Company ID Show only Company Name Show both Company ID, Name 2012 Total

84

Customer Feedback during Development of 1998 MECS: Mail/Electronic Survey  

U.S. Energy Information Administration (EIA) Indexed Site

1998 MECS User Needs 1998 MECS User Needs Mail/Electronic Survey Results A mail/electronic survey was conducted as part of the process to collect information on the data needs of MECS customers. The collection time frame was May 1 through July 31, 1998. The survey portion has been completed, and the total results are now available. During this three-month period, the electronic user-needs survey received about 207 hits. Yet, only 15 of those hits resulted in the transmission of a completed survey. Exactly 239 surveys were mailed to customers on the mailing list of the MECS publication. A total of 50 completed surveys (21% response rate) were returned, 32 of which resulted from a follow-up mail request. Only two surveys were returned by the 11 trade associations that were identified as MECS users. Where appropriate, the replies of those two TRADE

85

Energy Department Emergency Response Team Ready to Respond to...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department Emergency Response Team Ready to Respond to Hurricane Irene Energy Department Emergency Response Team Ready to Respond to Hurricane Irene August 26, 2011 - 12:15pm...

86

Automated Program Description  

E-Print Network (OSTI)

The Programmer's apprentice (PA) is an automated program development tool. The PA depends upon a library of common algorithms (cliches) as the source of its knowledge about programming. The PA uses these cliches to understand ...

Cyphers, D. Scott

87

Automated reaction mapping  

Science Conference Proceedings (OSTI)

Automated reaction mapping is a fundamental first step in the analysis of chemical reactions and opens the door to the development of sophisticated chemical kinetic tools. This article formulates the reaction mapping problem as an optimization problem. ... Keywords: Cheminformatics, mechanisms

John D. Crabtree; Dinesh P. Mehta

2009-02-01T23:59:59.000Z

88

Roxboro Integrated Automation Project  

Science Conference Proceedings (OSTI)

EPRI, Carolina Power & Light (CP&L), and ASEA Brown Boveri (ABB) formed an alliance to develop and demonstrate automation technologies at CP&LOs Roxboro Plant. This alliance is governed by a Memorandum of Understanding that allows all parties to share in the success of the products developed, and to contribute to their commercialization. This research project is intended to demonstrate the economic benefits of efficient and useful plant-wide automation technologies for the utility industry. Successful im...

1997-01-12T23:59:59.000Z

89

This form may be submitted to the EIA by mail, fax, e-mail, or secure file trans  

U.S. Energy Information Administration (EIA) Indexed Site

C" C" "MONTHLY REPORT OF PRIME SUPPLIER SALES OF PETROLEUM PRODUCTS" "SOLD FOR LOCAL CONSUMPTION" "This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. Title 18 USC 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. See Instructions for further details on the sanctions and the provisions concerning the confidentiality of information submitted on this form." "PART 1. RESPONDENT IDENTIFICATION DATA",,,,,,,,,,,,,,,,,,,,,,,"PART 2. SUBMISSION INFORMATION"

90

Rebecca Peterson VIA U.S. Mail and E-mail: U.S. Department of Energy ERS2014@eia.gov  

Gasoline and Diesel Fuel Update (EIA)

May 6, 2013 May 6, 2013 Rebecca Peterson VIA U.S. Mail and E-mail: U.S. Department of Energy ERS2014@eia.gov U.S. Energy Information Administration Rebecca.Patterson@eia.doe.gov Mail Stop EI-23, Forrestal Building 1000 Independence Avenue SW Washington, D.C. 20585 Re: Comments on Form EIA-930 Dear Ms. Peterson: Alaska Electric Light and Power (AEL&P), the electric utility serving Juneau, Alaska, offers these comments on the proposed implementation of Form EIA-930 "Balancing Authority Operations Report." (a) whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information shall have practical utility. AEL&P is a small, electrically isolated utility. AEL&P generates,

91

NIST Offering Free Access to Standards for First Responders  

Science Conference Proceedings (OSTI)

NIST Offering Free Access to Standards for First Responders. From NIST Tech Beat: April 26, 2011. ...

2011-04-26T23:59:59.000Z

92

Automating DNA processing  

E-Print Network (OSTI)

Technology is currently available to identify the genetic codes responsible for physical traits and genetic diseases in both plants and animals. Regardless of whether the final goal is medical diagnosis or breeder selection, extensive time and resources must be spent in laboratory research to determine the genetic structure of the relevant organisms. DNA processing is riddled with time intensive laboratory techniques that must be improved or replaced if genotyping large numbers of samples is to be accomplished. This thesis identifies and explains modules in DNA processing and how they can be improved by automation. modules associated with genome mapping are the focus of most of the discussion. A functional biochemistry background is provided so that researchers in automation can be efficiently assimilated to future biochen-fistry/automation projects. The needs of biochemistry researchers at Texas A&M University are specifically addressed. Herein, DNA processing has been defined as a series of discrete sub-processes or process modules in order to aid scheduling of future automation projects. Target process modules (sub-processes with a high probability of automation success) have been identified. In addition, possible automation solutions have been proposed for each target module along with a characterization of fundamental design parameters. Concluding this text is a discussion of procedures in genome mapping that have not been sufficiently automated. The initial focus of this thesis is on short term solutions. However, attention is given to more conceptual solutions accompanied by the biochemistry background necessary to begin developing them. Though systems are proposed to improve the efficiency of many processes, no implementation has been attempted. Design specifications are based on observation of current laboratory techniques and the variance that is typically allowed in relevant process parameters in TAMU laboratories.

Wienen, Michael Jan

1994-01-01T23:59:59.000Z

93

HIGHLY AUTOMATED MACROMOLECULAR  

NLE Websites -- All DOE Office Websites (Extended Search)

AUTOMATED MACROMOLECULAR AUTOMATED MACROMOLECULAR CRYSTALLOGRAPHY BEAMLINE (AMX) Group Leader: Dieter Schneider Proposal Team: M. Allaire 1 , L. Berman 1 , M. Chance 2 , W. Hendrickson 3 , A. Héroux 1 , J. Jakoncic 1 , A. Orville 1 , H. Robinson 1 , D. Schneider 1 , W. Shi 2 , A. Soares 1 , V. Stojanoff 1 , R. Sweet 1 1 Brookhaven National Laboratory, 2 Case Western Reserve University, 3 Columbia University MISSION APPLICATIONS AND CAPABILITIES ADDITIONAL INFORMATION * AMX at NSLS-II will provide structural biologists with ready access to an advanced macromolecular crystallography (MX) beamline for the elucidation of structure and function of macromolecular complexes. * Its high flux, tunable energy, and natively small focal spot will make it a crystallographer's preferred beamline. * Its high degree of automation will provide a high throughput

94

V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java 7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets May 2, 2013 - 6:00am Addthis PROBLEM: A vulnerability was reported in IBM Lotus Notes PLATFORM: IBM Notes 8.0.x, 8.5.x, 9.0 ABSTRACT: A remote user can cause Java applets to be executed on the target user's system REFERENCE LINKS: Security Tracker Alert ID 1028504 IBM Security Bulletin 1633819 CVE-2013-0127 CVE-2013-0538 IMPACT ASSESSMENT: Medium DISCUSSION: The mail client does not filter 'applet' and 'javascript' tags in HTML-based email messages. A remote user can send a specially crafted email message that, when loaded by the target user, will execute arbitrary Java code on the target system. The code will run with the privileges of the

95

V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java 7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets May 2, 2013 - 6:00am Addthis PROBLEM: A vulnerability was reported in IBM Lotus Notes PLATFORM: IBM Notes 8.0.x, 8.5.x, 9.0 ABSTRACT: A remote user can cause Java applets to be executed on the target user's system REFERENCE LINKS: Security Tracker Alert ID 1028504 IBM Security Bulletin 1633819 CVE-2013-0127 CVE-2013-0538 IMPACT ASSESSMENT: Medium DISCUSSION: The mail client does not filter 'applet' and 'javascript' tags in HTML-based email messages. A remote user can send a specially crafted email message that, when loaded by the target user, will execute arbitrary Java code on the target system. The code will run with the privileges of the

96

E-Mail Client and Mobile Device Configuration Changes for Exchange...  

NLE Websites -- All DOE Office Websites (Extended Search)

coming in When notification is received, restart Outlook. Outlook 2010, cached mode disabled 14.0.6112.5000 Connection lost; cannot log in to view existing mail Reopen Outlook....

97

emergency.pppl.gov Join Our Mailing List A Collaborative National Center for Fusion & Plasma Research  

E-Print Network (OSTI)

emergency.pppl.gov Join Our Mailing List A Collaborative National Center for Fusion & Plasma Research Search News Room News Archive American Fusion News Press Releases Publications Princeton Journal

98

MTBE Prices Responded to Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

6 6 Notes: On top of the usual factors impacting gasoline prices, natural gas has had some influence recently. MTBE is an oxygenate used in most of the RFG consumed in the U.S. Generally, it follows gasoline prices and its own supply/demand balance factors. But this winter, we saw it respond strongly to natural gas prices. MTBE is made from methanol and isobutylene, which in turn come from methane and butane. Both methane and butane come from natural gas streams. Until this year, the price of natural gas has been so low that it had little effect. But the surge that occurred in December and January pulled MTBE up . Keep in mind that about 11% MTBE is used in a gallon of RFG, so a 30 cent increase in MTBE is only about a 3 cent increase in the price of RFG. While we look ahead at this summer, natural gas prices should be

99

Automated software engineering: supporting understanding  

Science Conference Proceedings (OSTI)

The most important role for automation in software engineering is the support of human understanding. Some aspects of understanding and how it can be supported are discussed. Keywords: Automation, Complexity, Description, Fragmentation, Manipulation, Mechanisation

Michael Jackson

2008-12-01T23:59:59.000Z

100

Automated Transportation Management System (ATMS) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Waste Management Packaging and Transportation Automated Transportation Management System (ATMS) Automated Transportation Management System (ATMS) The Department of Energy's...

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Automated Demand Response and Commissioning  

E-Print Network (OSTI)

internal conditions. Maximum Demand Saving Intensity [W/ft2]automated electric demand sheds. The maximum electric shed

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-01-01T23:59:59.000Z

102

Portable Automated Mesonet II  

Science Conference Proceedings (OSTI)

The Portable Automated Mesonet II (PAM II) system was developed by NCAR to provide surface mesoscale data for the research needs of the atmospheric science community. The PAM system has 60 remote stations with planned growth to 300. In such a ...

Fred V. Brock; George H. Saum; Steven R. Semmer

1986-12-01T23:59:59.000Z

103

NNSA hosts Illinois emergency responders during technical exchange...  

National Nuclear Security Administration (NNSA)

Illinois emergency responders during technical exchange meeting | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the...

104

Terminal automation system maintenance  

SciTech Connect

Nothing has improved petroleum product loading in recent years more than terminal automation systems. The presence of terminal automation systems (TAS) at loading racks has increased operational efficiency and safety and enhanced their accounting and management capabilities. However, like all finite systems, they occasionally malfunction or fail. Proper servicing and maintenance can minimize this. And in the unlikely event a TAS breakdown does occur, prompt and effective troubleshooting can reduce its impact on terminal productivity. To accommodate around-the-clock loading at racks, increasingly unattended by terminal personnel, TAS maintenance, servicing and troubleshooting has become increasingly demanding. It has also become increasingly important. After 15 years of trial and error at petroleum and petrochemical storage and transfer terminals, a number of successful troubleshooting programs have been developed. These include 24-hour {open_quotes}help hotlines,{close_quotes} internal (terminal company) and external (supplier) support staff, and {open_quotes}layered{close_quotes} support. These programs are described.

Coffelt, D.; Hewitt, J. [Engineered Systems Inc., Tempe, AZ (United States)

1997-01-01T23:59:59.000Z

105

Automated gas chromatography  

DOE Patents (OSTI)

An apparatus and process for the continuous, near real-time monitoring of low-level concentrations of organic compounds in a liquid, and, more particularly, a water stream. A small liquid volume of flow from a liquid process stream containing organic compounds is diverted by an automated process to a heated vaporization capillary where the liquid volume is vaporized to a gas that flows to an automated gas chromatograph separation column to chromatographically separate the organic compounds. Organic compounds are detected and the information transmitted to a control system for use in process control. Concentrations of organic compounds less than one part per million are detected in less than one minute. 7 figs.

Mowry, C.D.; Blair, D.S.; Rodacy, P.J.; Reber, S.D.

1999-07-13T23:59:59.000Z

106

Automated Demand Response Tests  

Science Conference Proceedings (OSTI)

This report includes assessments and test results of four end-use technologies, representing products in the residential, commercial, and industrial sectors, each configured to automatically receive real-time pricing information and critical peak pricing (CPP) demand response (DR) event notifications. Four different vendors were asked to follow the interface requirements set forth in the Open Automated Demand Response (OpenADR) standard that was introduced to the public in 2008 and currently used in two ...

2008-12-22T23:59:59.000Z

107

Automated Demand Response Tests  

Science Conference Proceedings (OSTI)

This report, which is an update to EPRI Report 1016082, includes assessments and test results of four end-use vendor technologies. These technologies represent products in the residential, commercial, and industrial sectors, each configured to automatically receive real-time pricing information and critical peak pricing (CPP) demand response (DR) event notifications. Four different vendors were asked to follow the interface requirements set forth in the Open Automated Demand Response (OpenADR) Communicat...

2009-03-30T23:59:59.000Z

108

DIEGO FAZI Mailing address: Solar Energy Conversion Group Chemical Sciences & Engineering Division  

NLE Websites -- All DOE Office Websites (Extended Search)

DIEGO FAZI DIEGO FAZI Mailing address: Solar Energy Conversion Group Chemical Sciences & Engineering Division Bldg 200, Room E105 Argonne National Laboratory 9700 South Cass Ave. Argonne IL 60439-4831 E-mail addresses: dfazi@anl.gov Office Number: 630-252-5796 Fax: 630-252-9289 Personal Pages: http://faculty.wcas.northwestern.edu/diego-fazi/ http://www.fazid.org Research Interests Diego Fazi comes from a theoretical Physics background and he performed research in gravitational-wave astronomy within the project LIGO from 2005 to 2012. In October 2012 Dr. Fazi joined the CSE division at Argonne as a postdoctoral appointee in the Solar Conversion

109

TJ Automation | Open Energy Information  

Open Energy Info (EERE)

TJ Automation TJ Automation Jump to: navigation, search Name TJ Automation Facility TJ Automation Sector Wind energy Facility Type Small Scale Wind Facility Status In Service Owner TJ Automation Energy Purchaser TJ Automation Location Archbold OH Coordinates 41.45823855°, -84.30666804° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.45823855,"lon":-84.30666804,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

110

Automated Demand Response and Commissioning  

NLE Websites -- All DOE Office Websites (Extended Search)

and Commissioning Title Automated Demand Response and Commissioning Publication Type Conference Paper LBNL Report Number LBNL-57384 Year of Publication 2005 Authors Piette, Mary...

111

Automated Centrifugal Chiller Diagnostician - Available ...  

Summary. Researchers and engineers at PNNL have developed an automated, sophisticated, multi-level, real-time centrifugal chiller diagnostician with ...

112

Training Program EHS-145: First Responder Hazards Awareness Training  

NLE Websites -- All DOE Office Websites (Extended Search)

45: First Responder Hazards Awareness Training COURSE SYLLABUS Subject Category: Emergency Preparedness Schedule: NA Course Length: 15-30 minutes Medical Approval: NA Delivery...

113

News and Update: National Science Foundation Responds to ...  

Science Conference Proceedings (OSTI)

National Science Foundation Responds to Terrorist Assault with Emergency Research, .... the WTC and the response of hospitals and other emergency services.

114

ORISE: REAC/TS trains emergency responders in preparation for...  

NLE Websites -- All DOE Office Websites (Extended Search)

Emergency Response Training REACTS trains emergency responders in preparation for Pan American Games REACTS conducts radiation emergency medical response training around the...

115

Making Space for a New Medium: On the Use of Electronic Mail in a Newspaper Newsroom  

Science Conference Proceedings (OSTI)

Within the field of computer-supported cooperative work, there are a continuously growing number of studies of the use of electronic media in groups and organisations. Despite the existence of this impressive body of research, there have been comparatively ... Keywords: computer-mediated communication, electronic mail, ethnographic study, newspaper, newsroom environment, workplace studies

Amelie Hssjer; Kerstin Severinson Eklundh

2009-02-01T23:59:59.000Z

116

Using the Internet DNS to Distribute RFC1327 Mail Address Mapping Tables  

Science Conference Proceedings (OSTI)

This memo defines how to store in the Internet Domain Name System the mapping information needed by e-mail gateways and other tools to map RFC822 domain names into X.400 O/R names and vice versa. Mapping information can be managed in a distributed rather ...

C. Allocchio; A. Bonito; B. Cole; S. Giordano; R. Hagens

1994-08-01T23:59:59.000Z

117

A. Y. T. Leung1 e-mail: bcaleung@cityu.edu.hk  

E-Print Network (OSTI)

X. Guo A. Y. T. Leung1 e-mail: bcaleung@cityu.edu.hk Department of Building and Construction, City, Arizona State University, Tempe, AZ 85287-6106 X. Q. He Department of Building and Construction, City of Carbon Nanotubes: An Atomic-Scale Finite Element Study This paper employs the atomic-scale finite element

Jiang, Hanqing

118

NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector June 7  

E-Print Network (OSTI)

NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector June 7 meeting Cocks Friedman, Randy NW Natural Gas (503) 721-2475 randy.friedman@nwnatural.com Distribution Finklea Edward NW-8553 bdickens@ci.tacoma.wa.us Electric Utility Defenbach, Byron Intermountain Gas (208) 377-6080 bdefen

119

NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector  

E-Print Network (OSTI)

NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector Cocks, Michael BPA Natural Gas (503) 721-2475 randy.friedman@nwnatural.com Distribution Finklea Edward NW Ind. Gas Users (503@ci.tacoma.wa.us Electric Utility Defenbach, Byron Intermountain Gas (208) 377-6080 bdefen@intgas.com Distribution Dahlberg

120

Automated fiber pigtailing machine  

DOE Patents (OSTI)

The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

Strand, O.T.; Lowry, M.E.

1999-01-05T23:59:59.000Z

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Automated Demand Response Technologies and Demonstration in New York City  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies and Demonstration in New York City Technologies and Demonstration in New York City using OpenADR Title Automated Demand Response Technologies and Demonstration in New York City using OpenADR Publication Type Report LBNL Report Number LBNL-6470E Year of Publication 2013 Authors Kim, Joyce Jihyun, Sila Kiliccote, and Rongxin Yin Date Published 09/2013 Publisher LBNL/NYSERDA Abstract Demand response (DR) - allowing customers to respond to reliability requests and market prices by changing electricity use from their normal consumption pattern - continues to be seen as an attractive means of demand-side management and a fundamental smart-grid improvement that links supply and demand. Since October 2011, the Demand Response Research Center at Lawrence Berkeley National Laboratory and New York State Energy Research and Development Authority have conducted a demonstration project enabling Automated Demand Response (Auto-DR) in large commercial buildings located in New York City using Open Automated Demand Response (OpenADR) communication protocols. In particular, this project focuses on demonstrating how OpenADR can automate and simplify interactions between buildings and various stakeholders in New York State including the independent system operator, utilities, retail energy providers, and curtailment service providers. In this paper, we present methods to automate control strategies via building management systems to provide event-driven demand response, price response and demand management based on OpenADR signals. We also present cost control opportunities under day-ahead hourly pricing for large customers and Auto-DR control strategies developed for demonstration buildings. Lastly, we discuss the communication architecture and Auto-DR system designed for the demonstration project to automate price response and DR participation.

122

Tobias Maile  

NLE Websites -- All DOE Office Websites (Extended Search)

and Matthew Garr. "A software tool to compare measured and simulated building energy performance data." In IBPSA Building Simulation 2011. Sydney, Australia, 2011....

123

Installation and Commissioning Automated Demand Response Systems  

E-Print Network (OSTI)

their partnership in demand response automation research andand Techniques for Demand Response. LBNL Report 59975. Mayof Fully Automated Demand Response in Large Facilities.

Kiliccote, Sila; Global Energy Partners; Pacific Gas and Electric Company

2008-01-01T23:59:59.000Z

124

Installation and Commissioning Automated Demand Response Systems  

E-Print Network (OSTI)

al: Installation and Commissioning Automated Demand ResponseConference on Building Commissioning: April 22 24, 2008al: Installation and Commissioning Automated Demand Response

Kiliccote, Sila; Global Energy Partners; Pacific Gas and Electric Company

2008-01-01T23:59:59.000Z

125

Automation Alley Technology Center | Open Energy Information  

Open Energy Info (EERE)

Automation Alley Technology Center Jump to: navigation, search Name Automation Alley Technology Center Place United States Sector Services Product General Financial & Legal...

126

Rockwell Automation - Owens Corning Teaming Profile  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation programmable automation controller to collect data on motor kilowatts, speed, and torque. Project Summary By using real time data collected by the...

127

Building Technologies Office: Automated Home Energy Management...  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Area Network Trends SmartGridCity(tm) Integration with Home Controls Automated HomeEnergy Management Automated Monitoring, Control, Diagnostics, Optimization and Soft Repair...

128

Automating the analytical laboratory via the Chemical Analysis Automation paradigm  

Science Conference Proceedings (OSTI)

To address the need for standardization within the analytical chemistry laboratories of the nation, the Chemical Analysis Automation (CAA) program within the US Department of Energy, Office of Science and Technology`s Robotic Technology Development Program is developing laboratory sample analysis systems that will automate the environmental chemical laboratories. The current laboratory automation paradigm consists of islands-of-automation that do not integrate into a system architecture. Thus, today the chemist must perform most aspects of environmental analysis manually using instrumentation that generally cannot communicate with other devices in the laboratory. CAA is working towards a standardized and modular approach to laboratory automation based upon the Standard Analysis Method (SAM) architecture. Each SAM system automates a complete chemical method. The building block of a SAM is known as the Standard Laboratory Module (SLM). The SLM, either hardware or software, automates a subprotocol of an analysis method and can operate as a standalone or as a unit within a SAM. The CAA concept allows the chemist to easily assemble an automated analysis system, from sample extraction through data interpretation, using standardized SLMs without the worry of hardware or software incompatibility or the necessity of generating complicated control programs. A Task Sequence Controller (TSC) software program schedules and monitors the individual tasks to be performed by each SLM configured within a SAM. The chemist interfaces with the operation of the TSC through the Human Computer Interface (HCI), a logical, icon-driven graphical user interface. The CAA paradigm has successfully been applied in automating EPA SW-846 Methods 3541/3620/8081 for the analysis of PCBs in a soil matrix utilizing commercially available equipment in tandem with SLMs constructed by CAA.

Hollen, R.; Rzeszutko, C.

1997-10-01T23:59:59.000Z

129

Robust automated knowledge capture.  

SciTech Connect

This report summarizes research conducted through the Sandia National Laboratories Robust Automated Knowledge Capture Laboratory Directed Research and Development project. The objective of this project was to advance scientific understanding of the influence of individual cognitive attributes on decision making. The project has developed a quantitative model known as RumRunner that has proven effective in predicting the propensity of an individual to shift strategies on the basis of task and experience related parameters. Three separate studies are described which have validated the basic RumRunner model. This work provides a basis for better understanding human decision making in high consequent national security applications, and in particular, the individual characteristics that underlie adaptive thinking.

Stevens-Adams, Susan Marie; Abbott, Robert G.; Forsythe, James Chris; Trumbo, Michael Christopher Stefan; Haass, Michael Joseph; Hendrickson, Stacey M. Langfitt

2011-10-01T23:59:59.000Z

130

Berkeley automated supernova search  

SciTech Connect

The Berkeley automated supernova search employs a computer controlled 36-inch telescope and charge coupled device (CCD) detector to image 2500 galaxies per night. A dedicated minicomputer compares each galaxy image with stored reference data to identify supernovae in real time. The threshold for detection is m/sub v/ = 18.8. We plan to monitor roughly 500 galaxies in Virgo and closer every night, and an additional 6000 galaxies out to 70 Mpc on a three night cycle. This should yield very early detection of several supernovae per year for detailed study, and reliable premaximum detection of roughly 100 supernovae per year for statistical studies. The search should be operational in mid-1982.

Kare, J.T.; Pennypacker, C.R.; Muller, R.A.; Mast, T.S.; Crawford, F.S.; Burns, M.S.

1981-01-01T23:59:59.000Z

131

Automation in modeling: using automation for finishing room capacity planning  

Science Conference Proceedings (OSTI)

Capacity planning of a furniture finishing system using both deterministic analysis and stochastic simulation is conveniently performed with the aid ActiveX Automation. Users interactively build a complete model of a finishing system with an Excel interface, ...

Ryan Heath Melton; C. Thomas Culbreth; Stephen D. Roberts; Jeffrey A. Joines

2001-12-01T23:59:59.000Z

132

Automating Personalized Battery Management on Smartphones  

E-Print Network (OSTI)

3 Automating Battery Management . . . . . . .122 Battery Goal Setting UI . . . . . . . . . . . . . . .Power and Battery Management . . . . . . . . . . . . . . .

Falaki, Mohamamd Hossein

2012-01-01T23:59:59.000Z

133

Validation Program - The Security Content Automation ...  

Science Conference Proceedings (OSTI)

... Information technology Laboratory (ITL). Security Content Automation Protocol (SCAP) Validation Program. The SCAP Validation ...

2013-12-10T23:59:59.000Z

134

Local Leaders: Respond to Natural Gas Disruptions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » Energy Assurance » Emergency Preparedness » Community Services » Energy Assurance » Emergency Preparedness » Community Guidelines » Local Leaders: Respond to Natural Gas Disruptions Local Leaders: Respond to Natural Gas Disruptions Local Leaders: Respond to Natural Gas Disruptions Because natural gas is distributed through underground pipelines, delivery disruptions occur less often than electrical outages. Severe storms, flooding, and earthquakes can expose and break pipes, however. When disruptions do occur, it can take weeks or even months to restore. Communicate effectively with the public, and ensure that first responders and gas companies have everything they need to speed up restoration efforts. Effectively communicate with the public-It may be necessary to explain to the public why it takes longer to restore natural gas service

135

Washington v. DOE - Respondents' Response in Opposition to Petitioner's  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Washington v. DOE - Respondents' Response in Opposition to Washington v. DOE - Respondents' Response in Opposition to Petitioner's Motion Washington v. DOE - Respondents' Response in Opposition to Petitioner's Motion Department of Energy's response brief in opposition to the State of Washington's petition for review before the D.C. Circuit; Washington asked the Court to review DOE's decision to terminate development of a high-level waste repository at Yucca Mountain, and to issue a preliminary injunction enjoining DOE from taking further action to terminate the program. Washington v. DOE - Respondents' Response in Opposition to Petitioner's Motion More Documents & Publications U.S. DEPARTMENT OF ENERGY'S REPLY BRIEF IN SUPPORT OF REVIEW AND REVERSAL OF THE BOARD'S RULING ON THE MOTION TO WITHDRAW DOE's Petition for Interlocutory Review

136

DNA Damage after Continuous Irradiation: Yanch and Engelward Respond  

E-Print Network (OSTI)

We thank Beyea for his comments and would like to respond, in particular, regarding the works he cites in his letter. First, the results of our study are, in fact, consistent with the findings of many human epidemiologic ...

Yanch, Jacquelyn C.

137

Homeowners: Respond to Fuel Shortages | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Homeowners: Respond to Fuel Shortages Homeowners: Respond to Fuel Shortages Homeowners: Respond to Fuel Shortages Homeowners: Respond to Fuel Shortages Natural disasters and other hazards can impact the energy industry's ability to produce and distribute petroleum products, including gasoline, diesel fuel, and heating oil. At the same time, the demand for fuel may spike due to evacuations, or because consumers are buying more fuel to power backup generators during electrical outages. All these factors may lead to fuel shortages, which will prompt local authorities and fuel suppliers to prioritize getting fuel to key assets such as emergency operations centers, hospitals, food supply dealers, water supply plants, and telecommunication networks. Homeowners should keep the following tips in mind:

138

Business Owners: Respond to an Energy Emergency | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Respond to an Energy Emergency Respond to an Energy Emergency Business Owners: Respond to an Energy Emergency Business Owners: Respond to an Energy Emergency Ensure your building is safe to occupy-Initially allow only essential, critical-operations staff into restricted areas. Ask your local or State health department for guidance on determining the safety of your building. Decide whether to activate backup power-If your backup generator doesn't automatically turn on during a power outage, you'll have to determine when to activate backup systems. First determine whether power is likely to be restored within 24 hours. If not, you may want to activate those systems to protect your business assets. Learn more Contact your fuel supplier-If you rely on fuel supplies for your business, vehicles, generators, and other equipment, contact your fuel

139

Responding to Solicitations Under DOE Work For Others Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RESPONDING TO SOLICITATIONS RESPONDING TO SOLICITATIONS UNDER DOE WORK FOR OTHERS PROGRAM PURPOSE: To provide guidance on the Department's policy related to DOE's laboratories ability to respond to solicitations from non-DOE sponsors under the Work for Others (WFO) program. SCOPE: This chapter provides guidance on the effect of laws, regulations, and statutes to DOE/NNSA WFO policy related to the prohibition of DOE Federally Funded Research and Development Centers (FFRDCs) and other facilities from competing directly with the domestic private sector. Particular emphasis is placed on WFO requirements governing how a DOE/NNSA site/facility management contractor operating an FFRDC or other DOE/NNSA facility may respond to Broad Agency Announcements (BAAs), financial assistance solicitations, Program Research and

140

Patterns for responding to climate in shared-wall housing  

E-Print Network (OSTI)

Out of the inescapables of building come inspiration for architectural design. Decisions which respond to climate make their mark in design, just as structural requirements, lighting provisions, and the limitations of a ...

Paulos, Susan Kaufmann

1982-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Federal policy towards emergency responder interoperability : a path forward  

E-Print Network (OSTI)

Emergency responders have suffered from a lack of cross-agency radio communications for the past three decades. After numerous firefighters died in the terrorist attacks of September 11, partially due to a lack of ...

Weir, Tristan John

2006-01-01T23:59:59.000Z

142

The Scalable Reasoning System Improving situational awareness for emergency responders  

E-Print Network (OSTI)

The Scalable Reasoning System Improving situational awareness for emergency responders The City of Seattle's Emergency Operations Center (EOC) is activated about eight times a year, typically due, Mayor's office, and Emergency Management personnel work to provide critical services and communicate

143

Automated hedcut illustration using isophotes  

Science Conference Proceedings (OSTI)

In this work, we present an automated system for creating hedcut illustrations, portraits rendered using small image feature aligned dots (stipples). We utilize edge detection and shading cues from the input photograph to direct stipple placement within ...

SungYe Kim; Insoo Woo; Ross Maciejewski; David S. Ebert

2010-06-01T23:59:59.000Z

144

Automated Assembly Using Feature Localization  

E-Print Network (OSTI)

Automated assembly of mechanical devices is studies by researching methods of operating assembly equipment in a variable manner; that is, systems which may be configured to perform many different assembly operations ...

Gordon, Steven Jeffrey

1986-12-01T23:59:59.000Z

145

Open Automated Demand Response for Small Commerical Buildings  

E-Print Network (OSTI)

ofFullyAutomatedDemand ResponseinLargeFacilities. FullyAutomatedDemandResponseTestsinLargeFacilities. OpenAutomated DemandResponseCommunicationStandards:

Dudley, June Han

2009-01-01T23:59:59.000Z

146

Scenarios for Consuming Standardized Automated Demand Response Signals  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large Facilities.Fully Automated Demand Response Tests in Large Facilities.Interoperable Automated Demand Response Infrastructure.

Koch, Ed

2009-01-01T23:59:59.000Z

147

Automation World Features New White Paper on Wireless Security...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automation World Features New White Paper on Wireless Security Automation World Features New White Paper on Wireless Security The April 2009 issue of Automation World magazine...

148

Use of Automated External Defibrillators  

SciTech Connect

In an effort to improve survival from cardiac arrest, the American Heart Association (AHA) has promoted the Chain of Survival concept, describing a sequence of prehospital steps that result in improved survival after sudden cardiac arrest. These interventions include immediate deployment of emergency medical services, prompt cardiopulmonary resuscitation, early defibrillation when indicated, and early initiation of advanced medical care. Early defibrillation has emerged as the most important intervention with survival decreasing by 10% with each minute of delay in defibrillation. Ventricular Fibrillation (VF) is a condition in which there is uncoordinated contraction of the heart cardiac muscle of the ventricles in the heart, making them tremble rather than contract properly. VF is a medical emergency and if the arrhythmia continues for more than a few seconds, blood circulation will cease, and death can occur in a matter of minutes. During VF, contractions of the heart are not synchronized, blood flow ceases, organs begin to fail from oxygen deprivation and within 10 minutes, death will occur. When VF occurs, the victim must be defibrillated in order to establish the hearts normal rhythm. On average, the wait for an ambulance in populated areas of the United States is about 11 minutes. In view of these facts, the EFCOG Electrical Safety Task Group initiated this review to evaluate the potential value of deployment and use of automated external defibrillators (AEDs) for treatment of SCA victims. This evaluation indicates the long term survival benefit to victims of SCA is high if treated with CPR plus defibrillation within the first 3-5 minutes after collapse. According to the American Heart Association (AHA), survival rates as high as 74% are possible if treatment and defibrillation is performed in the first 3 minutes. In contrast survival rates are only 5% where no AED programs have been established to provide prompt CPR and defibrillation. ["CPR statistics" American Heart Association] Early intervention with both CPR and defibrillation can result in high long-term survival rates for SCA, as demonstrated by a study investigating the beneficial effects of AED devices at Chicagos OHare and Midway airports. The American Medical Association (AMA) advocates the widespread placement of AEDs [AMA Res. 413, A-02; Res. 424, A-04]; supports increasing government and industry funding for the purchase of AED devices; and encourages the American public to become trained in CPR and the use of AEDs. Some states, including Maryland, have enacted legislation requiring AED devices and a certified responder be available at high school and school-sponsored athletic events due the risk of SCA to athletes (the most common cause of death in young athletes). Ensuring AED availability at Department of Energy (DOE) sites would serve as a means of preventative intervention for over 14,000 DOE employees and 193,000 contract workers. It is estimated 1 per 1,000 adults 35 years of age and older will experience SCA in a given year.

Gregory K Christensen

2009-02-01T23:59:59.000Z

149

Impostazioni Google Apps con client Mail di Apple Mac per l'account di fantasia pinco.panco@uniroma1.it  

E-Print Network (OSTI)

Impostazioni Google Apps con client Mail di Apple Mac per l'account di fantasia pinco è ospitato sui server google.com) #12;Impostazioni Google Apps con client Mail di Apple Mac per l Google Apps con client Mail di Apple Mac per l'account di fantasia pinco.panco@uniroma1.it Pag. 3

Di Pillo, Gianni

150

Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A veren, Inc., A veren, Inc., Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 2010- CW- 0711 Issued: October 6, 2010 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Averen, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements at 10 C.F.R. § 430.62. 2. The DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the

151

Energy Department Emergency Response Team Ready to Respond to Hurricane  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department Emergency Response Team Ready to Respond to Department Emergency Response Team Ready to Respond to Hurricane Irene Energy Department Emergency Response Team Ready to Respond to Hurricane Irene August 26, 2011 - 12:15pm Addthis Hurricane Irene made landfall at approximately 7:30 am EDT near Cape Lookout, North Carolina with maximum sustained winds of 85 mph (Category 1). This NOAA GOES-13 satellite image captures Irene’s landfall moment. | Image courtesy of NOAA Hurricane Irene made landfall at approximately 7:30 am EDT near Cape Lookout, North Carolina with maximum sustained winds of 85 mph (Category 1). This NOAA GOES-13 satellite image captures Irene's landfall moment. | Image courtesy of NOAA Patricia A. Hoffman Patricia A. Hoffman Assistant Secretary, Office of Electricity Delivery & Energy Reliability

152

Responding To Hurricane Sandy: DOE Situation Reports | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Responding To Hurricane Sandy: DOE Situation Reports Responding To Hurricane Sandy: DOE Situation Reports Responding To Hurricane Sandy: DOE Situation Reports November 7, 2012 - 11:15am Addthis Sandy made landfall as a post-tropical cyclone on the southern coast of New Jersey near Atlantic City at 8 p.m. on October 29, with top sustained winds of 80 mph. | Photo courtesy of NOAA. Sandy made landfall as a post-tropical cyclone on the southern coast of New Jersey near Atlantic City at 8 p.m. on October 29, with top sustained winds of 80 mph. | Photo courtesy of NOAA. Amanda Scott Amanda Scott Former Managing Editor, Energy.gov What are the key facts? For more information about emergency preparedness, visit Ready.gov. For the latest news on Hurricane Sandy, visit the FEMA blog. November 7, 2012 - 4:02pm: Reports on Hurricane Sandy can now be found in

153

DOE Monitoring Energy Infrastructure, Responds as Isaac Makes Landfall |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Monitoring Energy Infrastructure, Responds as Isaac Makes Monitoring Energy Infrastructure, Responds as Isaac Makes Landfall DOE Monitoring Energy Infrastructure, Responds as Isaac Makes Landfall August 29, 2012 - 11:45am Addthis Hurricane Isaac is makes its way toward the Gulf Coast and the Energy Department provides details on the storm’s impact, and the recovery and restoration activities being undertaken. | Photo courtesy of NOAA Hurricane Isaac is makes its way toward the Gulf Coast and the Energy Department provides details on the storm's impact, and the recovery and restoration activities being undertaken. | Photo courtesy of NOAA William Bryan William Bryan Deputy Assistant Secretary of Infrastructure Security and Energy Restoration What To Do During The Storm Listen to the direction of local authorities.

154

Local Leaders: Respond to an Energy Emergency | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Respond to an Energy Emergency Respond to an Energy Emergency Local Leaders: Respond to an Energy Emergency Gather information-Tap the energy and emergency contacts you established before the disaster occurred to gather information and assess the nature of the emergency before moving forward with your response. What immediate damage has impacted energy assets? What is the extent of the damage? Who in the community is currently impacted? Is it possible to provide the community access to a place unaffected by the energy emergency if needed? How long will it take to restore the community to pre-emergency conditions? Effectively communicate with the public-Ensure quick information from local officials and energy suppliers is readily available and accessible, via radio, television, newspapers, the Internet, social media,

155

NNSA, IAEA Conduct Emergency Response Training for First Responders for  

National Nuclear Security Administration (NNSA)

IAEA Conduct Emergency Response Training for First Responders for IAEA Conduct Emergency Response Training for First Responders for Ports and Customs | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Press Releases > NNSA, IAEA Conduct Emergency Response Training for ... Press Release NNSA, IAEA Conduct Emergency Response Training for First Responders for

156

First responder information flow simulation: a tool for technology assessment  

Science Conference Proceedings (OSTI)

New information technology is becoming available for first responders at a rapid rate. Often this new technology comes with not only new capabilities but also a high price tag. Policy makers and emergency managers need a way to assess which portfolio ...

C. Donald Robinson; Donald E. Brown

2005-12-01T23:59:59.000Z

157

An imaging, communications and beamed power architecture for first responders  

Science Conference Proceedings (OSTI)

Electric power delivered as wireless beams through aerial platforms can make a large difference to the ability of first responders to find and rescue survivors in an emergency. An architecture suitable for India is proposed, synergizing developments ... Keywords: aerostat, antenna, emergency response, millimeter wave, power beaming, systems, waveguide

Narayanan Komerath

2011-12-01T23:59:59.000Z

158

Disciplined agility for process control & automation  

E-Print Network (OSTI)

Process automation vendors must consider agility as a basis to gain a competitive edge in innovation. Process Automation systems can impact the operating cost of manufacturing equipment, the safe control of large quantities ...

Tibazarwa, Augustine

2009-01-01T23:59:59.000Z

159

Automated Demand Response Opportunities in Wastewater Treatment Facilities  

E-Print Network (OSTI)

Interoperable Automated Demand Response Infrastructure,study of automated demand response in wastewater treatmentopportunities for demand response control strategies in

Thompson, Lisa

2008-01-01T23:59:59.000Z

160

AutoMed: an automated mediator for multi-issue bilateral negotiations  

Science Conference Proceedings (OSTI)

In this paper, we present AutoMed, an automated mediator for multi-issue bilateral negotiation under time constraints. AutoMed elicits the negotiators preferences and analyzes them. It monitors the negotiations and proposes possible solutions for resolving ... Keywords: Automated mediator, Experiments, Negotiation

Michal Chalamish; Sarit Kraus

2012-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

NISTIR 7511 Revision 1, Security Content Automation ...  

Science Conference Proceedings (OSTI)

... CONTENT AUTOMATION PROTOCOL (SCAP) VERSION 1.0 VALIDATION PROGRAM TEST REQUIREMENTS (DRAFT) XCCDF.V.2: The vendor ...

2013-04-29T23:59:59.000Z

162

Adaptable methodology for automation application development  

Science Conference Proceedings (OSTI)

An adaptable methodology for automation application development (AMAAD) is introduced. This development methodology is based on the key concept that design automation (DA) applications are a subset of higher level knowledge-based engineering (KBE) applications, ... Keywords: CommonKADS, Design automation, Knowledge-based engineering, MOKA, Productivity enhancement

Christian van der Velden; Cees Bil; Xinghuo Xu

2012-04-01T23:59:59.000Z

163

Collaborative Systems for Building Automation  

Science Conference Proceedings (OSTI)

This paper describes the use of new generation of PLC's and WinCC software in creating collaborative systems for managing, controlling and supervising building electric equipment. These systems assure all the requirements of a building and offer to the ... Keywords: Building Automation System, PLC, WinCC, Redundancy, HVAC, HAS, SCADA, HMI

Ioan Valentin Sita

2012-09-01T23:59:59.000Z

164

Automation ensures safety, extends production  

Science Conference Proceedings (OSTI)

This paper reviews some current improvements in offshore platform safety as a result of new regulations. In response to Norwegian Petroleum Directorate regulations limiting personnel on the rig floor, Weatherford Norway has developed a casing modem with remote-controlled power tongs. This paper reviews the various automated systems for handling drill pipes and joints on offshore platforms and how they work.

Perdue, J.M.

1996-06-01T23:59:59.000Z

165

Automated computation of scattering amplitudes  

E-Print Network (OSTI)

We review some of the recent advances in the computation of one-loop scattering amplitudes which led to the construction of efficient and automated computational tools for NLO predictions. Particular attention is devoted to unitarity-based methods and integrand-level reduction techniques. Extensions of one-loop integrand-level techniques to higher orders are also briefly illustrated.

Giovanni Ossola

2013-10-11T23:59:59.000Z

166

Internet Dial-In Infodisk E-Mail Diskette Natural Gas Annual,  

Gasoline and Diesel Fuel Update (EIA)

Internet Internet Dial-In Infodisk E-Mail Diskette Natural Gas Annual, 1996 Provides information on supply and disposition of natural gas in the United States. Information is provided nationally, regionally, and by State for 1996. Historical Natural Gas Annual, 1930 through 1996 Contains historical information about supply and disposition of natural gas at the national, regional, and State level, as well as prices at selected points in the flow of gas from wellhead to burnertip. Natural Gas 1996: Issues and Trends Examines how industry restructuring continues to expand choices, and challenges, for industry, participants, and natural gas customers. Natural Gas 1995: Issues and Trends Addresses current issues affecting the natural gas industry and markets, and analyzes trends in the most recent natural gas data. Natural Gas 1994: Issues and Trends Provides an overview of the natural

167

Via E-Mail Michael Li Electricity Policy Specialist U.S. Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 1, 2010 November 1, 2010 Via E-Mail Michael Li Electricity Policy Specialist U.S. Department of Energy Office of Electricity Delivery and Energy Reliability 1000 Independence Avenue, SW Washington, DC 20585 smartgridpolicy@hq.doe.gov Re: Smart Grid RFI: Addressing Policy And Logistical Challenges Dear Mr. Li: On behalf of the Association of Home Appliance Manufacturers (AHAM), I would like to provide our comments on the Smart Grid RFI: Addressing Policy and Logistical Challenges, 75 Fed. Reg. 57,006 (Sept. 17, 2010). The Association of Home Appliance Manufacturers (AHAM) represents manufacturers of major, portable and floor care home appliances, and suppliers to the industry. AHAM's membership includes over 150 companies throughout the world. In the U.S., AHAM members employ tens

168

By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 19, 2012 June 19, 2012 By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency U.S. Department of Energy Office of the General Counsel 1000 Independence Ave., SW Washington, D.C. 20585 Regulatory.Review@hq.doe.gov Re: Regulatory Burden RFI Dear Mr. Cohen: The Association of Home Appliance Manufacturers (AHAM) respectfully submits the following comments to the Department of Energy (DOE) on its Regulatory Burden RFI, 77 Fed. Reg. 28518 (May 15, 2012). AHAM represents manufacturers of major, portable and floor care home appliances, and suppliers to the industry. AHAM's more than 150 members employ tens of thousands of people in the U.S. and produce more than 95% of the household appliances shipped for sale within the

169

BY FAX AND CERTIFIED MAIL James A. Garrett President AeroSys, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

13, 2010 13, 2010 BY FAX AND CERTIFIED MAIL James A. Garrett President AeroSys, Inc. 929 Eldridge Drive Hagerstown, MD 21740 Dear Mr. Garrett: The attached notice advises you of test results stemming from the September 24, 2009 test notice issued by the United States Department of Energy (DOE) pursuant to 10 CFR § 430.70 regarding the performance of the remaining products manufactured by AeroSys, Inc. (AeroSys) that were selected for enforcement testing. The notice also advises you of your legal obligations. Violations of the applicable energy-efficiency standards may be subject to civil penalties. Separate from this notice, DOE may issue a notice of liability for such penalties as appropriate. As specified in the attached notice, DOE asks that AeroSys acknowledge receipt of this notice

170

By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2011 1, 2011 By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency U.S. Department of Energy Office of the General Counsel 1000 Independence Ave., SW Room 6A245 Washington, D.C. 20585 Regulatory.Review@hq.doe.gov Re: Regulatory Burden RFI Dear Mr. Cohen: The Association of Home Appliance Manufacturers (AHAM) respectfully submits the following comments to the Department of Energy (DOE) on its Request for Information on reducing regulatory burden, 76 Fed. Reg. 6123 (Feb. 3, 2011). AHAM represents manufacturers of major, portable and floor care home appliances, and suppliers to the industry. AHAM's more than 150 members employ tens of thousands of people in the U.S. and produce more than 95% of the household appliances shipped for sale within the

171

By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 1, 2011 August 1, 2011 By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency U.S. Department of Energy Office of the General Counsel 1000 Independence Ave., SW Room 6A245 Washington, D.C. 20585 Regulatory.Review@hq.doe.gov Re: EO 13563 Preliminary Plan Dear Mr. Cohen: The Association of Home Appliance Manufacturers (AHAM) respectfully submits the following comments to the Department of Energy (DOE) on preliminary plan for retrospective analysis of existing rules, 76 Fed. Reg. 40646 (July 11, 2011). AHAM represents manufacturers of major, portable and floor care home appliances, and suppliers to the industry. AHAM's more than 150 members employ tens of thousands of people in the U.S. and produce more than 95% of the household appliances shipped for sale within the

172

Report Period: EIA ID NUMBER: Appendix A: Mailing Address: Appendix B:  

U.S. Energy Information Administration (EIA) Indexed Site

Report Period: Report Period: EIA ID NUMBER: Appendix A: Mailing Address: Appendix B: Zip Code - Secure File Transfer option available at: - - - - Email form to: OOG.SURVEYS@eia.doe.gov Fax form to: (202) 586-9772 Email address: Oil & Gas Survey U.S. Department of Energy Ben Franklin Station PO Box 279 Washington, DC 20044-0279 Questions? Call toll free: 1-800-638-8812 1. Total Acquisitions (Enter the total volume of foreign crude oil acquired during the report month for importation into the United States. This is the sum of column (l), Part III, excluding resubmission.) 2. Offshore Inventories (Enter the total volume of foreign oil owned by the firm, for eventual importation into the United States which is held in storage outside the United States and/or is enroute to the United States as of the

173

Homeowners: Respond to Power Outages | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Power Outages Power Outages Homeowners: Respond to Power Outages Homeowners: Respond to Power Outages After a disaster, electric utilities and government officials will first work to restore power to critical infrastructure like power plants and transmission lines, water treatment facilities, and telecommunications networks, and also to hospitals, critical care facilities, and emergency response agencies. It may take several days or even weeks to restore power to individual homeowners, but here's what you can do to help prepare and recover power more quickly: Charge mobile devices-If you have power, charge your cell phones, laptops, and other mobile devices so they'll have the maximum amount of battery power stored in the event of a power outage. These devices will help you communicate with your power company, and they'll help you stay

174

Homeowners: Respond to Natural Gas Disruptions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Natural Gas Disruptions Natural Gas Disruptions Homeowners: Respond to Natural Gas Disruptions Homeowners: Respond to Natural Gas Disruptions Because natural gas is distributed through underground pipelines, delivery disruptions occur less often than electrical outages. Severe storms, flooding, and earthquakes can expose and break pipes, however. When disruptions do occur, it can take weeks or even months to restore. Homeowners should take care in identifying and reporting any problems, as they may pose substantial risk to public health and safety. A break in a natural gas pipeline can lead to fires and/or explosions. Many of the following guidelines would apply if you detect a propane tank leak, as well. Contact your propane retailer or local fire department in an emergency. Detect a problem-A natural gas leak can be detected by smell,

175

Challenges for Early Responders to a Nuclear / Radiological Terrorism Incident  

Science Conference Proceedings (OSTI)

Even in the best of circumstances, most municipalities would face severe challenges in providing effective incident response to a large scale radiation release caused by nuclear terrorism or accident. Compounding obvious complexities, the effectiveness of first and early responders to a radiological emergency may also be hampered by an insufficient distribution of radiation detection and monitoring equipment, local policies concerning triage and field decontamination of critical victims, malfunctioning communications, inadequate inter-agency agility, and the psychological 'fear' impact on early responders. This paper examines several issues impeding the early response to nuclear terrorism incidents with specific consideration given to the on-going and forward-thinking preparedness efforts currently being developed in the Sacramento, California region. Specific recommendations are provided addressing hot zone protocols, radiation detection and monitoring equipment, hasty patient packaging techniques, vertically and horizontally integrated pre-event training, mitigating psychological fear, and protocols for the effective 'hand-off' from first responders to subsequent early response-recovery teams. (authors)

Wells, M.A. [Sacramento Metropolitan Fire District, Sacramento, CA (United States); Stearns, L.J. [Shaw Environmental, Inc, Monroeville, PA (United States); Davie, A.D. [Shaw Environmental, Inc, Alpharetta, GA (United States); Day, E. [PELL Resources Company, Manassas, VA (United States)

2007-07-01T23:59:59.000Z

176

Rockwell Automation - Owens Corning Teaming Profile  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation Owens Corning Rockwell Automation Owens Corning 1201 S. Second Street 247 York Road Milwaukee, WI 53204 Guelph, Ontario N1E 3G4 Business: Industrial Automation Business: Textile / Fiber Nigel Hitchings Frank Peel Marketing Manager Electrical Support Specialist Phone: 508-357-8404 Phone: 519-823-7208 Email: nehitchings@ra.rockwell.com Email: frank.peel@owenscorning.com Owens Corning partners with Rockwell Automation to retrofit fans with VFDs, saving $67,000 annually Project Scope Owens Corning and Rockwell Automation installed Variable Frequency Drives (VFDs) on one 125HP cooling fan and three 40HP recirculation fans at the Owens Corning Guelph Glass Plant. The VFDs were integrated with the existing Rockwell Automation programmable automation controller to collect

177

Automated Export Control.PDF  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 I N S P E C T I O N R E P O R T U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF INSPECTIONS INSPECTION OF THE DEPARTMENT OF ENERGY'S AUTOMATED EXPORT CONTROL SYSTEM DECEMBER 2001 U.S. DEPARTMENT OF ENERGY Washington, DC 20585 December 7, 2001 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman /s/ Inspector General SUBJECT: INFORMATION: Report on "Inspection of the Department of Energy's Automated Export Control System" BACKGROUND The National Defense Authorization Act for Fiscal Year 2000 (NDAA for FY 2000) contained a provision that not later than March 30 of each year the President will submit to Congress, beginning in the year 2000 and ending in the year 2007, an annual report on the Government's policies and procedures with respect to the export of technologies and technical information with

178

Automated Transportation Management System (ATMS)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Re evised June 2010 Re evised June 2010 Autom The Depa Transport an integra system al outbound air. Its ea 1989 DOE significant operationa commerce electronic rates, pre transporta users eva shipments opportunit logistics im ATMS is i radioactiv shipments System ATMS is a activities p packaging including materials. common s lading, fre * W * C S * A * H * E * * O 0 mated T artment of Ene tation Manage ated web-base lowing users freight shipm arly developm E Inspector G t opportunitie al efficiency t e. Today's sy cally prepare s pare shipping ation bills befo aluate carrier s, and use co ties for system mprovements ts capability t ve and other h s in a comple Modules a modular sys performed by g and transpo radioactive a . Its modules shipment info eight bills, rate System Web Applic Carrier Eval Selection Automated

179

Automated nutrient analyses in seawater  

Science Conference Proceedings (OSTI)

This manual was assembled for use as a guide for analyzing the nutrient content of seawater samples collected in the marine coastal zone of the Northeast United States and the Bering Sea. Some modifications (changes in dilution or sample pump tube sizes) may be necessary to achieve optimum measurements in very pronounced oligotrophic, eutrophic or brackish areas. Information is presented under the following section headings: theory and mechanics of automated analysis; continuous flow system description; operation of autoanalyzer system; cookbook of current nutrient methods; automated analyzer and data analysis software; computer interfacing and hardware modifications; and trouble shooting. The three appendixes are entitled: references and additional reading; manifold components and chemicals; and software listings. (JGB)

Whitledge, T.E.; Malloy, S.C.; Patton, C.J.; Wirick, C.D.

1981-02-01T23:59:59.000Z

180

Instrumentation, Controls, and Automation Newsletter  

Science Conference Proceedings (OSTI)

This is the first newsletter for the Instrumentation, Controls, and Automation program of EPRI. This newsletter summarizes results of past and current projects and provides an overview of projects that will be completed in 2010. The first article describes the recently prototyped software Asset Fault Signature Database. The second article, "Inter-Control Center Communications Protocol Benefits Assessment," describes a previously completed EPRI/Southern Company tailored collaboration project. "Survey of C...

2009-12-22T23:59:59.000Z

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Great Republic: a historical and archaeological analysis of a Pacific mail steamship  

E-Print Network (OSTI)

In 1986 the remains of a shipwreck were discovered on Sand Island in the mouth of the Columbia River in the Pacific Northwest. The following year, a team of archaeologists investigated the site in order to determine its original identity. After a series of dives, the team concluded that the wreck was the remains of the Hudsons Bay Company brig, Isabella, a ship that was lost in that area in 1830. Recent investigations on the shipwreck disproved this identity. The turbulent conditions of the Columbia River have helped researchers by shifting a significant amount of sand overburden away from the vessel, exposing a greater area of the ship. With this new information, the wreck is now believed to be the remains of the wooden side-wheel steamer Great Republic that belonged to the Pacific Mail Steamship Company, rather than Isabella. This thesis investigates the history of Great Republic and its role in American maritime history, as well as its possible archaeological remains at the bottom of the Columbia River. In order to provide a clear and concise story, I begin with the history of the Pacific Mail Steamship Company and its importance in the development of the western coast of the United States. Since Great Republic was integral to the Asian trade of the nineteenth century, the second portion of the thesis is dedicated to Asian-American commercial and political relations during the nineteenth century. Great Republic and its three sister ships are then described and analyzed in detail based on contemporary sources. Finally, the archaeological evidence is assessed beginning with the discovery of the wreck. I detail the investigations and discoveries made on the wreck over the last 20 years. In my conclusions I discuss the importance of Great Republic from a historical standpoint and emphasize its place in American maritime history. I also detail key aspects concerning the wreck that I believe are imperative for future research. Though the remains convincingly appear to be those of Great Republic there are still structural features that need to be analyzed before a positive identification is possible.

Roberts, Andrew Philip

2008-12-01T23:59:59.000Z

182

Geochemical Journal, Vol. 39, pp. 383 to 389, 2005 *Corresponding author (e-mail: ytakaha@hiroshima-u.ac.jp)  

E-Print Network (OSTI)

383 Geochemical Journal, Vol. 39, pp. 383 to 389, 2005 *Corresponding author (e-mail: ytakaha@hiroshima,3 1 Department of Earth & Planetary Systems Science, Hiroshima University, Higashi-Hiroshima 739 for Multiple Isotope Research for Astro-and Geochemical Evolution (MIRAGE), Hiroshima University, Higashi-Hiroshima

183

Definition: Distribution Automation Communications Network | Open Energy  

Open Energy Info (EERE)

Automation Communications Network Automation Communications Network Jump to: navigation, search Dictionary.png Distribution Automation Communications Network A communications network or networks designed to deliver control signals and information between distribution automation devices, and between these devices and utility grid control systems. These networks can utilize wired or wireless connections, and can be utility-owned or provided as services by a third party.[1] Related Terms distribution automation References ↑ https://www.smartgrid.gov/category/technology/distribution_automation_communications_network [[C LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ategory: Smart Grid Definitionssmart grid,smart grid, |Template:BASEPAGENAME]]smart grid,smart grid, Retrieved from

184

Guidelines for Planning Interoperable Distribution Automation Systems  

Science Conference Proceedings (OSTI)

Fully integrated distribution automation is a relatively new challenge for the utility industry, and the full range of new capabilities it enables are not well understood. In addition, developing an overall strategy to long-term automation integration and deployment through the use of open standards adds to the challenge. These guidelines were developed to describe the overall vision of distribution automation and to assist in application of emerging open standards to the procurement and integration of a...

2004-04-26T23:59:59.000Z

185

Automated testing using executable formal specifications  

Science Conference Proceedings (OSTI)

A new method is presented for the automated random generation of valid content-sensitive test data and corresponding oracle information. The process takes as input a specification of the program under test, expressed as a functional program, and produces ... Keywords: automated program testing, automated random test data generation, automatic testing, computer aided software engineering, executable formal specifications, formal specification, functional program, oracle information, output test cases, program testing, valid content-sensitive test data, valid input space

N. Sanders

1996-01-01T23:59:59.000Z

186

Automated Surface Observing System: Standby Power Options  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Automated Surface Observing System Standby Options Power Automated Surface Observing System (ASOS) General System Description * Self contained group of sensors and data gathering equipment that produces an automated weather observation * Weather observations support aviation, climate data, non government weather operations, public consumption, etc. * Initial deployment began in 1991 and continued through 1997 * Located at 884 sites nationwide, normally at airports * System has two distinct subsystems: Field installed equipment (DCP & Sensor Group) and an indoor processor (ACU) with peripherals * Separate facility power for DCP & Sensors and ACU 1 * measure and collect data * Located on the airport * back up group for 10 minutes * Currently pl

187

Automated fenestration selection based on lighting performance...  

NLE Websites -- All DOE Office Websites (Extended Search)

i.e., aims at automated selection of fenestration systems that best meet specific lighting performance goals. The new method is based on manipulation of matrices that represent...

188

Next-Generation Robotics and Automation  

Science Conference Proceedings (OSTI)

... NIST activities led to the approval of a new IEEE Robotics and Automation Society Standards Working Group on ... Lead Organizational Unit: el. Staff: ...

2013-01-10T23:59:59.000Z

189

Automated Demand Response Technology Demonstration Project for...  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration Project for Small and Medium Commercial Buildings Title Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings...

190

Substation automation gains momentum with modern options  

SciTech Connect

This paper discusses issues associated with utility substation automation. Monitoring equipment for monitoring power flow, quality, and harmonics for three substations simultaneously is described.

Beaty, W.

1996-12-01T23:59:59.000Z

191

Automated Continuous Commissioning of Commercial Buildings  

E-Print Network (OSTI)

Conference on Building Commissioning. San Francisco, CA. 17.Commercial Buildings Commissioning, LBNL- 56637, Nov. 2004.Automated Continuous Commissioning Tool GUI Screenshots from

Bailey, Trevor

2013-01-01T23:59:59.000Z

192

Home Network Technologies and Automating Demand Response  

E-Print Network (OSTI)

networks_in_the_home_the_new_growth_market.htm [12] NationalHome Network Technologies and Automating Demand Responsethe University of California. Home Network Technologies and

McParland, Charles

2010-01-01T23:59:59.000Z

193

Automated Transmission Kikuchi Diffraction for Nanomaterials ...  

Science Conference Proceedings (OSTI)

Presentation Title, Automated Transmission Kikuchi Diffraction for Nanomaterials Characterization in the SEM. Author(s), Scott Sitzman. On-Site Speaker...

194

Automated micro-tracking planar solar concentrators  

E-Print Network (OSTI)

Photonics) University of California, San Diego, 2011UNIVERSITY OF CALIFORNIA, SAN DIEGO Automated Micro-TrackingChair University of California, San Diego iii DEDICATION To

Hallas, Justin Matthew

2011-01-01T23:59:59.000Z

195

REMOTE LABORATORIES IN AUTOMATION: AIP-PRIMECA RAO ARI PLATFORM Remote Laboratories in Automation  

E-Print Network (OSTI)

Terms -- Education, Laboratories, Manufacturing automation, Remote handling I.INTRODUCTION For a fewREMOTE LABORATORIES IN AUTOMATION: AIP-PRIMECA RAO ARI PLATFORM Remote Laboratories in Automation learners to train themselves on remote real or virtual systems. They represent essential components in e

Paris-Sud XI, Université de

196

Automated fuel pin loading system  

DOE Patents (OSTI)

An automated loading system for nuclear reactor fuel elements utilizes a gravity feed conveyor which permits individual fuel pins to roll along a constrained path perpendicular to their respective lengths. The individual lengths of fuel cladding are directed onto movable transports, where they are aligned coaxially with the axes of associated handling equipment at appropriate production stations. Each fuel pin can be reciprocated axially and/or rotated about its axis as required during handling steps. The fuel pins are inserted as a batch prior to welding of end caps by one of two disclosed welding systems.

Christiansen, David W. (Kennewick, WA); Brown, William F. (West Richland, WA); Steffen, Jim M. (Richland, WA)

1985-01-01T23:59:59.000Z

197

Automate feeders to improve reliability  

SciTech Connect

Pacific Gas and Electric Co. (PG and E) improved system reliability and saved money with an alarm and control system for substation distribution switches using remote control by standard telephone-communication links. The method is especially well suited for urban and suburban areas with independent telephone and power systems. The automated systems can also add capability to areas now limited by the emergency capability. The primary distribution alarm and control system has both a substation and a field switch element. Photographs accompanying the description help to explain how the controls work. 7 figures. (DCK)

1981-01-01T23:59:59.000Z

198

How to Respond to data Requests in Portfolio Manager  

NLE Websites -- All DOE Office Websites (Extended Search)

"How To" Series How to Respond to Data Requests in Portfolio Manager ® EPA's ENERGY STAR Portfolio Manager tool helps you measure and track the energy use, water use, and greenhouse gas emissions of your properties, all in a secure online environment. You can use the results to identify under-performing buildings, set investment priorities, verify efficiency improvements, and receive EPA recognition for superior energy performance. Portfolio Manager provides the ability for organizations wishing to collect data from a variety of individuals to develop and use a custom Data Request within Portfolio Manager. You may receive Data Requests from other users or organizations to provide property or portfolio data as part of a program or initiative. Each request includes a

199

Smashing science: Livermore scientists discover how explosives respond to  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 For immediate release: 12/12/2013 | NR-13-12-03 High Resolution Image A schematic representation of the shock experiment. The resulting energy release pushed the shock front to the left. Image by Liam Krauss/LLNL. Smashing science: Livermore scientists discover how explosives respond to shockwaves Anne M Stark, LLNL, (925) 422-9799, stark8@llnl.gov Watch Video A laser pulse impinging on an aluminum ablation layer (which is coated on a glass substrate to the right), which generates a rapidly expanding plasma. This small explosion pushes the ablator to the left and drives a shock wave in the sample. The experiment simultaneously measures the speed of the shock wave in the sample, and the speed of the ablator expansion, which allows Livermore researchers to estimate the pressure and density of the

200

Human-automation interaction for lunar landing aimpoint redesignation  

E-Print Network (OSTI)

Human-automation interactions are a critical area of research in systems with modem automation. The decision-making portion of tasks presents a special challenge for human-automation interactions because of the many factors ...

Needham, Jennifer M

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Concepts of User Centered Automation  

E-Print Network (OSTI)

The accident statistics of large technical systems have been steadily improved during the last decades. Also the number of fatal accidents in air and surface transportation is decreasing in spite off increased traffic. However, the relative share of so called human errors is increasing across application areas. Hence, for further improved reliability, the functional integration of humans in such systems must be reconsidered. Since the user, in the long run, will not and should not be eliminated by computers this paper reviews basic requirements of a human centered automation. Following an analysis of generic system functions, human factors requirements for automated functions are defined. It is shown how manual functions can be supported by assistance functions, for which a general system architecture and a classification scheme are presented. # 2001 ditions scientifiques et mdicales Elsevier SAS Zusammenfassung Die Unfallstatistiken grotechnischer Systeme haben sich in den letzten Jahrzehnten stndig verbessert, auch die Anzahl der Unflle mit Todesfolge im Luft- und Straenverkehr sinkt bei wachsendem Verkehrsaufkommen stetig. Der relative Anteil sogenannter menschlicher Fehler nimmt dagegen in allen Bereichen zu. Es besteht somit Anla, die Rolle des Menschen in derartigen Systemen neu zu berdenken, um die Zuverl ssigkeit komplexer Systeme weiter zu erhhen. Da der Benutzer auf lange Sicht nicht durch Rechner eliminiert werden kann und soll, untersucht dieser Beitrag die Erfordernisse einer benutzergerechten Automatisierung. Nach einer einleitenden Analyse grundlegender Systemfunktionen, der Automatisierungsgrenzen und der Leistungsdefizite des Menschen werden mgliche Formen und Strategien der Funktionsteilung zwischen Automatik und Benutzer hergeleitet. Zur Untersttzung...

Karl-friedrich Kraiss; Nico Hamacher

2001-01-01T23:59:59.000Z

202

Substation Integrated Automation System Based on DSP  

Science Conference Proceedings (OSTI)

This Paper introduces the application of digital signal processor (DSP) at Substation Integrated Automation System. Using the powerful digital signal processing capability of DSP, high-speed multi-channel data acquisition function, and excellent data ... Keywords: Substation, Digital Signal Processor, Integrated Automation System

Yanzhe Li; Duowang Fan; Xuwei Dong

2009-08-01T23:59:59.000Z

203

Findings from the 2004 Fully Automated Demand Response Tests...  

NLE Websites -- All DOE Office Websites (Extended Search)

the 2004 Fully Automated Demand Response Tests in Large Facilities Title Findings from the 2004 Fully Automated Demand Response Tests in Large Facilities Publication Type Report...

204

Demand Response and Open Automated Demand Response Opportunities...  

NLE Websites -- All DOE Office Websites (Extended Search)

Response and Open Automated Demand Response Opportunities for Data Centers Title Demand Response and Open Automated Demand Response Opportunities for Data Centers Publication Type...

205

A Demand Response (DR) Event: Benefits, Strategies, Automation...  

NLE Websites -- All DOE Office Websites (Extended Search)

A Demand Response (DR) Event: Benefits, Strategies, Automation and Future of DR Title A Demand Response (DR) Event: Benefits, Strategies, Automation and Future of DR Publication...

206

Design and Operation of an Open, Interoperable Automated Demand...  

NLE Websites -- All DOE Office Websites (Extended Search)

Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings Title Design and Operation of an Open, Interoperable Automated...

207

Demand Response and Open Automated Demand Response Opportunities...  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Response and Open Automated Demand Response Opportunities for Data Centers Title Demand Response and Open Automated Demand Response Opportunities for Data Centers...

208

Results and commissioning issues from an automated demand response pilot  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large Facilities"Management and Demand Response in Commercial Buildings", L Band Commissioning Issues from an Automated Demand Response.

Piette, Mary Ann; Watson, Dave; Sezgen, Osman; Motegi, Naoya

2004-01-01T23:59:59.000Z

209

Findings from Seven Years of Field Performance Data for Automated...  

NLE Websites -- All DOE Office Websites (Extended Search)

Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings Title Findings from Seven Years of Field Performance Data for Automated Demand Response...

210

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

E-Print Network (OSTI)

Goodin. 2009. Open Automated Demand Response Communicationsin Demand Response for Wholesale Ancillary Services. InOpen Automated Demand Response Demonstration Project. LBNL-

Ghatikar, Girish

2010-01-01T23:59:59.000Z

211

Field Demonstration of Automated Demand Response for Both Winter...  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration of Automated Demand Response for Both Winter and Summer Events in Large Buildings in the Pacific Northwest Title Field Demonstration of Automated Demand Response for...

212

Field Testing of Automated Demand Response for Integration of...  

NLE Websites -- All DOE Office Websites (Extended Search)

Field Testing of Automated Demand Response for Integration of Renewable Resources in California's Ancillary Services Market for Regulation Products Title Field Testing of Automated...

213

Fast Automated Demand Response to Enable the Integration of Renewable...  

NLE Websites -- All DOE Office Websites (Extended Search)

Fast Automated Demand Response to Enable the Integration of Renewable Resources Title Fast Automated Demand Response to Enable the Integration of Renewable Resources Publication...

214

Open Automated Demand Response Communications Specification (Version 1.0)  

E-Print Network (OSTI)

and Techniques for Demand Response. May 2007. LBNL-59975.tofacilitateautomating demandresponseactionsattheInteroperable Automated Demand Response Infrastructure,

Piette, Mary Ann

2009-01-01T23:59:59.000Z

215

Microsoft Word - Wireless Automation World for OE FINAL.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automation World Features New White Paper on Wireless Security, Interviews Authors April 16, 2009 The April 2009 issue of Automation World magazine features the white paper...

216

Computer Measurement and Automation System for Gas-fired Heating...  

NLE Websites -- All DOE Office Websites (Extended Search)

Computer Measurement and Automation System for Gas-fired Heating Furnace Title Computer Measurement and Automation System for Gas-fired Heating Furnace Publication Type Journal...

217

V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013...

218

Automated-Manual Transitions: Human Capabilities and Adaptive Cruise Control  

E-Print Network (OSTI)

TRANSIT AND HIGHWAYS Automated-Manual Transitions: HumanOF CALIFORNIA, BERKELEY Automated-Manual Transitions: HumanSuch systems will supplant manual controls during certain

Barton, Joseph E.; Cohn, Theodore E.; Nguyen, Khoi M.; Nguyen, Tieuvi; Toyofuku, Natsuko

2004-01-01T23:59:59.000Z

219

Mixed Manual/Semi-Automated Traffic: A Macroscopic Analysis  

E-Print Network (OSTI)

of Traffic Flow with Mixed Manual and Semi- Automatedof Mixed Semi-Automated/Manual Traffic, SAE Technical Paperof traffic flow with mixed manual and semi- automated

Bose, Arnab; Ioannou, Petros

2001-01-01T23:59:59.000Z

220

ISA Approves Standard for Wireless Automation in Process Control...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the...

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Solar Automation Inc | Open Energy Information  

Open Energy Info (EERE)

Inc Inc Jump to: navigation, search Name Solar Automation Inc Place Albuquerque, New Mexico Zip NM 8110 Product Produces manufacturing equipment for PV cells. References Solar Automation Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Solar Automation Inc is a company located in Albuquerque, New Mexico . References ↑ "Solar Automation Inc" Retrieved from "http://en.openei.org/w/index.php?title=Solar_Automation_Inc&oldid=351247" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties About us Disclaimers Energy blogs Linked Data Developer services

222

Take an integrated approach to refinery automation  

Science Conference Proceedings (OSTI)

An integrated approach to designing refinery automation systems is essential to guaranteeing systems compatibility and maximizing benefits. Several aspects of implementing integrated refinery automation should be considered early in the project. Many refineries have major parts of their business automated, starting from corporate planning at the higher level, down to DCS and field instrumentation. A typical refinery automation system architecture of the mid-eighties is shown. Automation systems help refineries improve their business through: Rationalization of man power; Increased throughputs; Reduced give-away; Reduced energy consumption; Better response to market demands and changes; Effective use of offsite areas through scheduling and automatic line-up systems; Reduced losses; and Decision support systems.

Wadi, I. (Abu Dhabi National Oil Co. (United Arab Emirates))

1993-09-01T23:59:59.000Z

223

Dynamic Whitelist Generation for Automated Response  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Methodology Methodology Results Dynamic Whitelist Generation for Automated Response Chris Strasburg, Josh Adams Ames Laboratory, US DOE cstras@ameslab.gov, jadams@ameslab.gov The Ames Laboratory, US DOE 1 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results Outline 1 Introduction About Ames Laboratory Motivation 2 Methodology Data Classifiers Experiments 3 Results The Ames Laboratory, US DOE 2 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames Laboratory Motivation Ames Physical Environment The Ames Laboratory, US DOE 3 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames Laboratory Motivation Ames Network Environment The Ames Laboratory, US DOE 4 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames

224

Open Automated Demand Response Technologies for Dynamic Pricing and Smart Grid  

Science Conference Proceedings (OSTI)

We present an Open Automated Demand Response Communications Specifications (OpenADR) data model capable of communicating real-time prices to electricity customers. We also show how the same data model could be used to for other types of dynamic pricing tariffs (including peak pricing tariffs, which are common throughout the United States). Customers participating in automated demand response programs with building control systems can respond to dynamic prices by using the actual prices as inputs to their control systems. Alternatively, prices can be mapped into"building operation modes," which can act as inputs to control systems. We present several different strategies customers could use to map prices to operation modes. Our results show that OpenADR can be used to communicate dynamic pricing within the Smart Grid and that OpenADR allows for interoperability with existing and future systems, technologies, and electricity markets.

Ghatikar, Girish; Mathieu, Johanna L.; Piette, Mary Ann; Kiliccote, Sila

2010-06-02T23:59:59.000Z

225

AUTOMATING GROUNDWATER SAMPLING AT HANFORD  

Science Conference Proceedings (OSTI)

Until this past October, Fluor Hanford managed Hanford's integrated groundwater program for the U.S. Department of Energy (DOE). With the new contract awards at the Site, however, the CH2M HILL Plateau Remediation Company (CHPRC) has assumed responsibility for the groundwater-monitoring programs at the 586-square-mile reservation in southeastern Washington State. These programs are regulated by the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response Compensation and Liability Act (CERCLA). The purpose of monitoring is to track existing groundwater contamination from past practices, as well as other potential contamination that might originate from RCRA treatment, storage, and disposal (TSD) facilities. An integral part of the groundwater-monitoring program involves taking samples of the groundwater and measuring the water levels in wells scattered across the site. More than 1,200 wells are sampled each year. Historically, field personnel or 'samplers' have been issued pre-printed forms that have information about the well(s) for a particular sampling evolution. This information is taken from the Hanford Well Information System (HWIS) and the Hanford Environmental Information System (HEIS)--official electronic databases. The samplers used these hardcopy forms to document the groundwater samples and well water-levels. After recording the entries in the field, the samplers turned the forms in at the end of the day and the collected information was posted onto a spreadsheet that was then printed and included in a log book. The log book was then used to make manual entries of the new information into the software application(s) for the HEIS and HWIS databases. This is a pilot project for automating this tedious process by providing an electronic tool for automating water-level measurements and groundwater field-sampling activities. The automation will eliminate the manual forms and associated data entry, improve the accuracy of the information recorded, and enhance the efficiency and sampling capacity of field personnel. The goal of the effort is to eliminate 100 percent of the manual input to the database(s) and replace the management of paperwork by the field and clerical personnel with an almost entirely electronic process. These activities will include the following: scheduling the activities of the field teams, electronically recording water-level measurements, electronically logging and filing Groundwater Sampling Reports (GSR), and transferring field forms into the site-wide Integrated Document Management System (IDMS).

CONNELL CW; HILDEBRAND RD; CONLEY SF; CUNNINGHAM DE

2009-01-16T23:59:59.000Z

226

Does the Fed Respond to Oil Price Shocks?  

E-Print Network (OSTI)

Abstract: Since Bernanke, Gertler and Watson (1997), a common view in the literature has been that systematic monetary policy responses to the inflation triggered by oil price shocks are an important source of aggregate fluctuations in the U.S. economy. We show that there is no evidence of systematic monetary policy responses to oil price shocks after 1987 and that this lack of a policy response is unlikely to be explained by reduced real wage rigidities. Prior to 1987, according to standard VAR models, the Federal Reserve was not responding to the inflation triggered by oil price shocks, as commonly presumed, but rather to the oil price shocks directly, consistent with a preemptive move by the Federal Reserve to counteract potential inflationary pressures. There are indications that this response is poorly identified, however, and there is no evidence that this policy response in the pre-1987 period caused substantial fluctuations in the Federal Funds rate or in real output. Our analysis suggests that the traditional monetary policy reaction framework explored by BGW and incorporated in subsequent DSGE models should be replaced by DSGE models that take account of the endogeneity of the real price of oil and that allow policy responses to depend on the underlying causes of oil price shocks.

Lutz Kilian

2009-01-01T23:59:59.000Z

227

Magnetic Resonance Connectome Automated Pipeline  

E-Print Network (OSTI)

This manuscript presents a novel, tightly integrated pipeline for estimating a connectome, which is a comprehensive description of the neural circuits in the brain. The pipeline utilizes magnetic resonance imaging (MRI) data to produce a high-level estimate of the structural connectivity in the human brain. The Magnetic Resonance Connectome Automated Pipeline (MRCAP) is efficient and its modular construction allows researchers to modify algorithms to meet their specific requirements. The pipeline has been validated and over 200 connectomes have been processed and analyzed to date. This tool enables the prediction and assessment of various cognitive covariates, and this research is applicable to a variety of domains and applications. MRCAP will enable MR connectomes to be rapidly generated to ultimately help spur discoveries about the structure and function of the human brain.

Gray, William R; Vogelstein, Joshua T; Landman, Bennett A; Prince, Jerry L; Vogelstein, R Jacob

2011-01-01T23:59:59.000Z

228

Automated Fresnel lens tester system  

DOE Green Energy (OSTI)

An automated data collection system controlled by a desktop computer has been developed for testing Fresnel concentrators (lenses) intended for solar energy applications. The system maps the two-dimensional irradiance pattern (image) formed in a plane parallel to the lens, whereas the lens and detector assembly track the sun. A point detector silicon diode (0.5-mm-dia active area) measures the irradiance at each point of an operator-defined rectilinear grid of data positions. Comparison with a second detector measuring solar insolation levels results in solar concentration ratios over the image plane. Summation of image plane energies allows calculation of lens efficiencies for various solar cell sizes. Various graphical plots of concentration ratio data help to visualize energy distribution patterns.

Phipps, G.S.

1981-07-01T23:59:59.000Z

229

Automated cleaning of electronic components  

SciTech Connect

Environmental and operator safety concerns are leading to the elimination of trichloroethylene and chlorofluorocarbon solvents in cleaning processes that remove rosin flux, organic and inorganic contamination, and particulates from electronic components. Present processes depend heavily on these solvents for manual spray cleaning of small components and subassemblies. Use of alternative solvent systems can lead to longer processing times and reduced quality. Automated spray cleaning can improve the quality of the cleaning process, thus enabling the productive use of environmentally conscious materials, while minimizing personnel exposure to hazardous materials. We describe the development of a prototype robotic system for cleaning electronic components in a spray cleaning workcell. An important feature of the prototype system is the capability to generate the robot paths and motions automatically from the CAD models of the part to be cleaned, and to embed cleaning process knowledge into the automatically programmed operations.

Drotning, W.; Meirans, L.; Wapman, W.; Hwang, Y.; Koenig, L.; Petterson, B.

1994-07-01T23:59:59.000Z

230

Process development for automated solar cell and module production. Task 4: automated array assembly  

DOE Green Energy (OSTI)

The scope of work under this contract involves specifying a process sequence which can be used in conjunction with automated equipment for the mass production of solar cell modules for terrestrial use. This process sequence is then critically analyzed from a technical and economic standpoint to determine the technological readiness of each process step for implementation. The process steps are ranked according to the degree of development effort required and according to their significance to the overall process. Under this contract the steps receiving analysis were: back contact metallization, automated cell array layup/interconnect, and module edge sealing. For automated layup/interconnect both hard automation and programmable automation (using an industrial robot) were studied. The programmable automation system was then selected for actual hardware development. Economic analysis using the SAMICS system has been performed during these studies to assure that development efforts have been directed towards the ultimate goal of price reduction. Details are given. (WHK)

Hagerty, J.J.

1980-06-30T23:59:59.000Z

231

Fueling Robot Automates Hydrogen Hose Reliability Testing (Fact Sheet)  

SciTech Connect

Automated robot mimics fueling action to test hydrogen hoses for durability in real-world conditions.

Harrison, K.

2014-01-01T23:59:59.000Z

232

Automated container transport system between inland port and terminals  

Science Conference Proceedings (OSTI)

In this article we propose a new concept called automated container transportation system between inland port and terminals (ACTIPOT) which involves the use of automated trucks to transfer containers between an inland port and container terminals. The ... Keywords: Automated container transportation system, Petri nets, automated truck, supervisory control, vehicle control

Jianlong Zhang; Petros A. Ioannou; Anastasios Chassiakos

2006-04-01T23:59:59.000Z

233

Guidelines for Implementing Substation Automation Using UCA-SA (Utility Communications Architecture-Substation Automation)  

Science Conference Proceedings (OSTI)

This report provides guidelines for substation engineers, information technologists, and utility managers on the information issues related to substation automation, in particular when UCA-SA (Utility Communications Architecture Substation Automation IEC61850) standards are used. Substation automation is a new challenge for the utility industry, and these guidelines provide the overall vision as well as the specific steps that should be taken for successful implementation of this new enabling cap...

2003-11-11T23:59:59.000Z

234

New Automated Detection Method of OSA Based on Artificial Neural ...  

Science Conference Proceedings (OSTI)

Faculty of Engineering, Department of Biomedical Engineering,. Jordan University of Science and Technology,. Irbid 22110, Jordan e-mail: klweesy@just

235

Participation through Automation: Fully Automated Critical Peak Pricing in Commercial Buildings  

E-Print Network (OSTI)

2004. Working Group 2 Demand Response Evaluation Program2006. Au tomated Demand Response Control Strategies inrequired. Figure 2. Demand Response Automation Server and

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

236

Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response  

E-Print Network (OSTI)

ProjectCommittee135 CapacityBiddingProgram ClientandREPORT AUTOMATION OF CAPACITY BIDDING WITH AN AGGREGATORDevelopmentandTestingoftheCapacityBiddingProgramfor

Kiliccote, Sila

2011-01-01T23:59:59.000Z

237

Role of Standard Demand Response Signals for Advanced Automated Aggregation  

Science Conference Proceedings (OSTI)

Emerging standards such as OpenADR enable Demand Response (DR) Resources to interact directly with Utilities and Independent System Operators to allow their facility automation equipment to respond to a variety of DR signals ranging from day ahead to real time ancillary services. In addition, there are Aggregators in todays markets who are capable of bringing together collections of aggregated DR assets and selling them to the grid as a single resource. However, in most cases these aggregated resources are not automated and when they are, they typically use proprietary technologies. There is a need for a framework for dealing with aggregated resources that supports the following requirements: Allows demand-side resources to participate in multiple DR markets ranging from wholesale ancillary services to retail tariffs without being completely committed to a single entity like an Aggregator; Allow aggregated groups of demand-side resources to be formed in an ad hoc fashion to address specific grid-side issues and support the optimization of the collective response of an aggregated group along a number of different dimensions. This is important in order to taylor the aggregated performance envelope to the needs to of the grid; Allow aggregated groups to be formed in a hierarchical fashion so that each group can participate in variety of markets from wholesale ancillary services to distribution level retail tariffs. This paper explores the issues of aggregated groups of DR resources as described above especially within the context of emerging smart grid standards and the role they will play in both the management and interaction of various grid-side entities with those resources.

Lawrence Berkeley National Laboratory; Kiliccote, Sila

2011-11-18T23:59:59.000Z

238

Definition: Automated Distribution Circuit Switches | Open Energy  

Open Energy Info (EERE)

Circuit Switches Circuit Switches Jump to: navigation, search Dictionary.png Automated Distribution Circuit Switches Distribution circuit switches that can be operated automatically in response to control signals from local sensors, distribution automation systems, or grid control systems. Such switches can be installed as automated devices or existing equipment can be retrofitted with controls and communications. The degree of automation depends on the controls and communications system implemented. These switches can be opened or closed to isolate portions of a distribution circuit that has experienced a short circuit (fault), or must be taken out of service for maintenance or other operations. When used in combination, these switches can reroute power from other substations or nearby distribution circuits.[1]

239

LANL to certify automated influenza surveillance system  

NLE Websites -- All DOE Office Websites (Extended Search)

LANL to certify automated influenza surveillance system LANL to certify automated influenza surveillance system LANL to certify automated influenza surveillance system A compact automated system for surveillance and screening of potential pandemic strains of influenza and other deadly infectious diseases is a step closer to reality. January 31, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy

240

The Automated Tropical Cyclone Forecasting System (ATCF)  

Science Conference Proceedings (OSTI)

The U.S. Navy Automated Tropical Cyclone Forecasting System (ATCF) is an IBM-AT compatible software package developed for the Joint Typhoon Warning Center (JTWC), Guam. ATCF is designed to assist forecasters with the process of making tropical ...

Ronald J. Miller; Ann J. Schrader; Charles R. Sampson; Ted L. Tsui

1990-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Definition: Distribution Automation | Open Energy Information  

Open Energy Info (EERE)

Automation Automation Jump to: navigation, search Dictionary.png Distribution Automation DA is a family of technologies including sensors, processors, communication networks, and switches that can perform a number of distribution system functions depending on how they are implemented. Over the last 20 years, utilities have been applying DA to improve reliability, service quality and operational efficiency. More recently, DA is being applied to perform automatic switching, reactive power compensation coordination, or other feeder operations/control.[1] Related Terms sustainability, smart grid References ↑ https://www.smartgrid.gov/category/technology/distribution_automation [[Ca LikeLike UnlikeLike You and one other like this.One person likes this. Sign Up to see what your friends like.

242

Automated Demand Response for Critical Peak Pricing  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Demand Response for Critical Peak Pricing Speaker(s): Naoya Motegi Date: June 9, 2005 - 12:00pm Location: Bldg. 90 California utilities have been exploring the use of...

243

Design automation for microfluidics-based biochips  

Science Conference Proceedings (OSTI)

Advances in microfluidics technology offer exciting possibilities in the realm of enzymatic analysis, DNA analysis, proteomic analysis involving proteins and peptides, immunoassays, implantable drug delivery devices, and environmental toxicity monitoring. ... Keywords: Microfluidics, biochips, design automation

Krishnendu Chakrabarty; Jun Zeng

2005-10-01T23:59:59.000Z

244

Automated Speech Recognition in air traffic control  

E-Print Network (OSTI)

Over the past few years, the technology and performance of Automated Speech Recognition (ASR) systems has been improving steadily. This has resulted in their successful use in a number of industrial applications. Motivated ...

Trikas, Thanassis

1987-01-01T23:59:59.000Z

245

Mirle Automation Corporation | Open Energy Information  

Open Energy Info (EERE)

Mirle Automation Corporation Mirle Automation Corporation Jump to: navigation, search Name Mirle Automation Corporation Place Hsinchu, Taiwan Zip 30077 Sector Solar Product A Taiwan-based automation system integrators and related product manufacturers who have entered thin film solar cell manufacturing equipment business. Coordinates 24.69389°, 121.148064° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":24.69389,"lon":121.148064,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

246

Distributed Intelligent Automated Demand Response (DIADR) Building  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Distributed Intelligent Automated Demand Distributed Intelligent Automated Demand Response (DIADR) Building Management System Distributed Intelligent Automated Demand Response (DIADR) Building Management System The U.S. Department of Energy (DOE) is currently conducting research into distributed intelligent-automated demand response (DIADR) building management systems. Project Description This project aims to develop a DIADR building management system with intelligent optimization and control algorithms for demand management, taking into account a multitude of factors affecting cost including: Comfort Heating, ventilating, and air conditioning (HVAC) Lighting Other building systems Climate Usage and occupancy patterns. The key challenge is to provide the demand response the ability to address more and more complex building systems that include a variety of loads,

247

Nearly-automated metadata hierarchy creation  

Science Conference Proceedings (OSTI)

Currently, information architects create metadata category hierarchies manually. We present a nearly-automated approach for deriving such hierarchies, by converting the lexical hierarchy WordNet into a format that reflects the contents of a target ...

Emilia Stoica; Marti A. Hearst

2004-05-01T23:59:59.000Z

248

Robust Automated Quality Assurance of Radiosonde Temperatures  

Science Conference Proceedings (OSTI)

This paper presents a description of the fully automated quality-assurance (QA) procedures that are being applied to temperatures in the Integrated Global Radiosonde Archive (IGRA). Because these data are routinely used for monitoring variations ...

Imke Durre; Russell S. Vose; David B. Wuertz

2008-08-01T23:59:59.000Z

249

An Evaluation of Inspection Automation Tools  

Science Conference Proceedings (OSTI)

A key element in manufacturing quality software is the early detection of defects which can be fostered by inspection techniques. Inspections may be boosted by automated tools that help in various tasks during the whole inspection process. We present ...

Vesa Tenhunen; Jorma Sajaniemi

2002-06-01T23:59:59.000Z

250

Assessment of Wireless Technologies for Advanced Automation  

Science Conference Proceedings (OSTI)

The power industry is seeing a resurgence of interest in advanced automation and customer communications. A variety of wireless technologies are becoming available that could be used in advanced automation applications for utilities. However, decisions on physical media infrastructure should be made cautiously since use of these technologies may directly impact system performance, reliability, and long-term costs. This report is a preliminary analysis of some of the leading wireless technologies that are...

2007-12-20T23:59:59.000Z

251

Scientific Process Automation Improves Data Interaction  

SciTech Connect

This is an article written for the September 09 Scientific Computing magazine about the work of the Scientific Process Automation team of The U.S. Department of Energy (DOE) Scientific Discovery through Advanced Computing (SciDAC) program. The SPA team is focused on developing and deploying automated workflows for a variety of computational science domains. Scientific workflows are the formalization of a scientific process that is frequently and repetitively performed.

Critchlow, Terence J.

2009-09-30T23:59:59.000Z

252

Automated Parallel Capillary Electrophoretic System  

DOE Patents (OSTI)

An automated electrophoretic system is disclosed. The system employs a capillary cartridge having a plurality of capillary tubes. The cartridge has a first array of capillary ends projecting from one side of a plate. The first array of capillary ends are spaced apart in substantially the same manner as the wells of a microtitre tray of standard size. This allows one to simultaneously perform capillary electrophoresis on samples present in each of the wells of the tray. The system includes a stacked, dual carousel arrangement to eliminate cross-contamination resulting from reuse of the same buffer tray on consecutive executions from electrophoresis. The system also has a gel delivery module containing a gel syringe/a stepper motor or a high pressure chamber with a pump to quickly and uniformly deliver gel through the capillary tubes. The system further includes a multi-wavelength beam generator to generate a laser beam which produces a beam with a wide range of wavelengths. An off-line capillary reconditioner thoroughly cleans a capillary cartridge to enable simultaneous execution of electrophoresis with another capillary cartridge. The streamlined nature of the off-line capillary reconditioner offers the advantage of increased system throughput with a minimal increase in system cost.

Li, Qingbo (State College, PA); Kane, Thomas E. (State College, PA); Liu, Changsheng (State College, PA); Sonnenschein, Bernard (Brooklyn, NY); Sharer, Michael V. (Tyrone, PA); Kernan, John R. (Loganton, PA)

2000-02-22T23:59:59.000Z

253

Facility automation for retail facilities  

Science Conference Proceedings (OSTI)

This article will focus on retail chain stores with areas of 22,000 to 75,000 sq ft, but much of the article will apply to all retail stores independent of size. Typically, a store is serviced by 5 to 15 rooftop HVAC units with a total cooling capacity of 50 to 150 tons, depending on the floor area and geographic location. The interior lighting represents a load of 80 to 300 KW with three lighting levels--retail, stocking, and security or night. Most stores are located in strip centers, and therefore, the parking lot lighting is provided by the landlord, but each store does control and service its own sign lighting. Generally, the total load controlled by an FAS represents 130 to 450 KW with corresponding annual energy costs ranging from $65,000 to $200,000 (natural gas and electricity), depending on the size of the store and the local unit costs of energy. Historical utility data, electrical and mechanical drawings, site surveys, significant analyses of data, and most importantly, discussions with corporate facilities management personnel and store operations personnel provide the source for the development theory and sequence of operation of the design of the facility automation systems for retail stores. The three main goals of an FAS are: reduce utility operating costs, maintain comfort levels during occupied hours, reduce HVAC maintenance costs.

Ameduri, G. (Roth Bros., Inc., Youngstown, OH (United States). Facilities Automation Division)

1994-12-01T23:59:59.000Z

254

Via E-mail to ERS2014@eia.gov Ms. Rebecca Peterson U. S. Energy Information Administration  

Gasoline and Diesel Fuel Update (EIA)

of the Northwest Balancing Authorities of the Northwest Balancing Authorities Page 1 of 6 May 6, 2013 Via E-mail to ERS2014@eia.gov Ms. Rebecca Peterson U. S. Energy Information Administration U. S. Department of Energy Re: Comments on Proposed Form EIA-930 "Balancing Authority Operations Report" Avista Corporation ("Avista"), Portland General Electric Company ("PGE"), NorthWestern Energy, Puget Sound Energy ("PSE"), Seattle City Light, Chelan PUD, and Tacoma Power (collectively, "Northwest Balancing Authorities" or "Northwest BAs") appreciate the opportunity to make comments on the

255

Open Automated Demand Response Technologies for Dynamic Pricing and Smart Grid  

E-Print Network (OSTI)

for Automated Demand Response in Commercial Buildings. In2010. Open Automated Demand Response Dynamic Pricing2009. Open Automated Demand Response Communications

Ghatikar, Girish

2010-01-01T23:59:59.000Z

256

Automated array assembly. Final report  

DOE Green Energy (OSTI)

Three main sections are included which describe a general technology assessment and manufacturing cost analysis; a near-term (1982) factory design; and the results of an experimental production study for the large-scale production of flat-panel silicon solar-cell arrays. The results of an extensive study and detailed analysis of technologies which could be related to array module manufacturing are presented. From this study, several manufacturing sequences emerge as candidates for satisfying the ERDA/JPL cost goal of $0.50/W selling price in 1986. A minimum manufacturing cost was found in a highly automated line of $0.30/W assuming the silicon is free. The panels are of a double-glass construction and are based on round wafers. Screen-printed silver has been used as the metallization with a spray-coated antireflection (AR) layer. The least expensive junction-formation technology appears to be ion implantation;however, several other technologies also may be used with very little cost penalty as described. An interim 1982 factory is described for the large-scale production of silicon solar-cell array modules. The boundary conditions for this design are the use of Czochralski silicon crystals and $25/kg polycrystalline silicon. The objective is a large-scale production facility to meet an intermediate ERDA cost goal of $2.00/W in 1982. A 6-month experimental production study of the elements of low-cost solar-cell manufacturing sequences is described as an outgrowth of the cost and manufacturing studies. This program consisted of three parts: an experimental production line study of the major variables associated with the fabrication of 3-in.-diameter silicon solar cells; a study of thick-film screen-printed silver metallization; and panel design and assembly development. (WHK)

D'Aiello, R.V.

1977-12-01T23:59:59.000Z

257

Automated array assembly. Annual report  

DOE Green Energy (OSTI)

The goal of the ERDA/JPL LSSA program of $0.50/W selling price for array modules in 1986 turns out to have been remarkably appropriate. An extensive and detailed analysis of technologies which could be related to array module manufacturing was completed and a minimum manufacturing cost in a highly automated line of $0.30/W was found assuming the silicon is free. The panels are of a double glass construction and are based on round wafers. Screen printed silver has been used as the metallization with a spray-coated AR layer. The least expensive junction formation technology appears to be ion implantation; however, several other technologies also may be used with very little cost penalty as described. Based on the required investment, a profit of $0.05/W appears reasonable. If silicon wafers are available at a price of $20 to 40/M/sup 2/, a selling price for these array modules of $0.50 to 0.66/W is projected. An analysis of the impact of factory size has been made. For a production level of 500 MW/yr, the price above is derived. For comparison, a factory processing 50 MW/yr using the same technology would sell modules for $0.54/W to $0.70/W. An analysis of the impact of wafer size indicates that with traditional metallization and panel designs there is no advantage in increasing wafer size from 3 in. to 5 in., and, in fact, there is some penalty (10% in $/W) due to increasedmetallization costs and reduced system performance. There is a premium placed on high efficiency due to its impact, not only on array module cost, but on system cost. For the near term goals of this program, wafers cut from single-crystal material seem the most likely sheet configuration.

Williams, B.F.

1977-05-01T23:59:59.000Z

258

Education of First Responders at Yale | U.S. DOE Office of Science...  

Office of Science (SC) Website

Education of First Responders at Yale Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Spinoff Applications SBIRSTTR Applications of...

259

Human Behavior Meets Building Intelligence: How Occupants Respond to Open Window Signals  

E-Print Network (OSTI)

Occupant Response to Window Control Signaling Systems,"Occupants Respond to Open Window Signals Katie Ackerly andincorporate operable windows for the benefits of personal

Ackerly, Katie; Brager, Gail

2012-01-01T23:59:59.000Z

260

ISA Approves Standard for Wireless Automation in Process Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. ISA Approves Standard for Wireless Automation in Process Control Applications More Documents & Publications DOE/OE National SCADA Test Bed Fiscal Year 2009 Work Plan Wireless System Considerations When Implementing NERC Critical Infrastructure Protection Standards Control Systems Security Standards: Accomplishments And Impacts

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Automated welding of nuclear piping systems  

SciTech Connect

Automated welding, or more broadly, automatic and mechanized welding processes, has found a role in nuclear power plant fabrication. This role has expanded from a rare or isolated application to relatively frequent usage in the last five years. More importantly, it is envisioned that use of automated welding will be increasing at an accelerated rate as broader exposure to this technology is achieved. Among the various pipe welding processes, the only one which has been developed for mechanized and automated nuclear piping welding is the gas tungsten arc welding (GTAW) process. This development has occurred in the past 10 to 15 years through the steady improvement and commmercialization of orbiting welding heads. Improvements in GTAW power supplies, control systems, etc., have aided this commercialization but the main element and pacing item has been the welding head itself. In order to review the status of mechanized and automated nuclear pipe welding, the topics of basic process equipment, joint design, fit-up requirements, welding parameters, and producibility will be addressed. In addition, anticipated future developments in automated systems will be discussed.

Hood, D.W.

1979-01-01T23:59:59.000Z

262

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

SciTech Connect

This study examines the use of OpenADR communications specification, related data models, technologies, and strategies to send dynamic prices (e.g., real time prices and peak prices) and Time of Use (TOU) rates to commercial and industrial electricity customers. OpenADR v1.0 is a Web services-based flexible, open information model that has been used in California utilities' commercial automated demand response programs since 2007. We find that data models can be used to send real time prices. These same data models can also be used to support peak pricing and TOU rates. We present a data model that can accommodate all three types of rates. For demonstration purposes, the data models were generated from California Independent System Operator's real-time wholesale market prices, and a California utility's dynamic prices and TOU rates. Customers can respond to dynamic prices by either using the actual prices, or prices can be mapped into"operation modes," which can act as inputs to control systems. We present several different methods for mapping actual prices. Some of these methods were implemented in demonstration projects. The study results demonstrate show that OpenADR allows interoperability with existing/future systems/technologies and can be used within related dynamic pricing activities within Smart Grid.

Ghatikar, Girish; Mathieu, Johanna L.; Piette, Mary Ann; Koch, Ed; Hennage, Dan

2010-08-02T23:59:59.000Z

263

Automated Sorting of Transuranic Waste  

SciTech Connect

The HANDSS-55 Transuranic Waste Sorting Module is designed to sort out items found in 55-gallon drums of waste as determined by an operator. Innovative imaging techniques coupled with fast linear motor-based motion systems and a flexible end-effector system allow the operator to remove items from the waste stream by a touch of the finger. When all desired items are removed from the waste stream, the remaining objects are automatically moved to a repackaging port for removal from the glovebox/cell. The Transuranic Waste Sorting Module consists of 1) a high accuracy XYZ Stereo Measurement and Imaging system, 2) a vibrating/tilting sorting table, 3) an XY Deployment System, 4) a ZR Deployment System, 5) several user-selectable end-effectors, 6) a waste bag opening system, 7) control and instrumentation, 8) a noncompliant waste load-out area, and 9) a Human/Machine Interface (HMI). The system is modular in design to accommodate database management tools, additional load-out ports, and other enhancements. Manually sorting the contents of a 55-gallon drum takes about one day per drum. The HANDSS-55 Waste Sorting Module is designed to significantly increase the throughput of this sorting process by automating those functions that are strenuous and tiresome for an operator to perform. The Waste Sorting Module uses the inherent ability of an operator to identify the items that need to be segregated from the waste stream and then, under computer control, picks that item out of the waste and deposits it in the appropriate location. The operator identifies the object by locating the visual image on a large color display and touches the image on the display with his finger. The computer then determines the location of the object, and performing a highspeed image analysis determines its size and orientation, so that a robotic gripper can be deployed to pick it up. Following operator verification by voice or function key, the object is deposited into a specified location.

Shurtliff, Rodney Marvin

2001-03-01T23:59:59.000Z

264

AIS Automation Dresden | Open Energy Information  

Open Energy Info (EERE)

AIS Automation Dresden AIS Automation Dresden Jump to: navigation, search Name AIS Automation Dresden Place Dresden, Germany Zip D-01237 Product Provides software for industrial process control for the semiconductor and photovoltaic industries. Coordinates 51.053645°, 13.740815° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":51.053645,"lon":13.740815,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

265

Definition: Automated Capacitors | Open Energy Information  

Open Energy Info (EERE)

Capacitors Capacitors Jump to: navigation, search Dictionary.png Automated Capacitors Capacitors can increase the voltage on a distribution circuit by providing reactive power (often referred to as volt-amperes-reactive or VArs). Capacitor banks are switched in discrete steps, either manually, or in response to the voltage at the location where they are connected; typically, distribution capacitor banks are switched in a single step. If the voltage falls too far below the set point, the capacitor is switched in to raise the voltage. If the voltage rises too high above the set point, the capacitor is switched out to lower the voltage. Automated capacitors can be switched in coordination with other voltage control devices with signals from local sensors, distribution automation systems, or grid

266

Bar-code automated waste tracking system  

Science Conference Proceedings (OSTI)

The Bar-Code Automated Waste Tracking System was designed to be a site-Specific program with a general purpose application for transportability to other facilities. The system is user-friendly, totally automated, and incorporates the use of a drive-up window that is close to the areas dealing in container preparation, delivery, pickup, and disposal. The system features ``stop-and-go`` operation rather than a long, tedious, error-prone manual entry. The system is designed for automation but allows operators to concentrate on proper handling of waste while maintaining manual entry of data as a backup. A large wall plaque filled with bar-code labels is used to input specific details about any movement of waste.

Hull, T.E.

1994-10-01T23:59:59.000Z

267

Automated imaging system for single molecules  

SciTech Connect

There is provided a high throughput automated single molecule image collection and processing system that requires minimal initial user input. The unique features embodied in the present disclosure allow automated collection and initial processing of optical images of single molecules and their assemblies. Correct focus may be automatically maintained while images are collected. Uneven illumination in fluorescence microscopy is accounted for, and an overall robust imaging operation is provided yielding individual images prepared for further processing in external systems. Embodiments described herein are useful in studies of any macromolecules such as DNA, RNA, peptides and proteins. The automated image collection and processing system and method of same may be implemented and deployed over a computer network, and may be ergonomically optimized to facilitate user interaction.

Schwartz, David Charles; Runnheim, Rodney; Forrest, Daniel

2012-09-18T23:59:59.000Z

268

Verified hybrid controllers for automated vehicles  

E-Print Network (OSTI)

Abstract The objective of an Automated Highway System (AHS) is to increase the safety and throughput of the existing highway infrastructure by introducing traffic automation. AHS is an example of a large scale, multiagent complex dynamical system and is ideally suited for a hierarchical hybrid controller. We discuss the design of safe and efficient hybrid controllers for regulation of vehicles on an AHS. We use game theoretic techniques to deal with the multiagent and multiobjective nature of the problem. The result is a hybrid controller that by design guarantees safety, without the need for further verification. The calculations also provide an upper bound on the performance that can be expected in terms of throughput at various levels of centralization. Index Terms Automated highway systems, game theory, safety. I.

John Lygeros; Datta N. Godbole; Shankar Sastry

1998-01-01T23:59:59.000Z

269

B&W Y-12 responds to NNSA's show cause letter | Y-12 National...  

NLE Websites -- All DOE Office Websites (Extended Search)

B&W Y-12 responds to ... B&W Y-12 responds to NNSA's show cause letter Posted: September 12, 2012 - 3:29pm On September 10, B&W Y-12 provided its response to the National Nuclear...

270

A lightweight and extensible Complex Event Processing system for sense and respond applications  

Science Conference Proceedings (OSTI)

Complex Event Processing (CEP) is considered as a promising technology for enabling the evolution of service-oriented enterprise systems towards operational aware systems. CEP effectively supports the implementation of ''sense and respond'' behaviours, ... Keywords: Complex Event Processing, Event processing declarative language, Goods monitoring, Sense and respond applications, Staged Event-Driven Architecture

Ivan Zappia; Federica Paganelli; David Parlanti

2012-09-01T23:59:59.000Z

271

Beyond Commissioning: The Role of Automation  

Science Conference Proceedings (OSTI)

This article takes a brief look at the benefits of commissioning and describes a vision of the future where most of the objectives of commissioning will be accomplished automatically by capabilities built into the building systems themselves. Commissioning will become an activity that's performed continuously rather than periodically, and only repairs requiring replacement or overhaul of equipment will require manual intervention. The article then identifies some of the technologies that will be needed to realize this vision and ends with a call for all involved in the enterprise of building commissioning and automation to embrace and dedicate themselves to a future of automated commissioning.

Brambley, Michael R.; Katipamula, Srinivas

2005-02-01T23:59:59.000Z

272

Letter Responding to Requests for Information Made by Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Responding to Requests for Information Made by Department of Responding to Requests for Information Made by Department of Energy (DOE) Personnel About Restarting Potomac River After a Shutdown. Letter Responding to Requests for Information Made by Department of Energy (DOE) Personnel About Restarting Potomac River After a Shutdown. Docket No. EO-05-01: This letter responds to requests for information made by Department of Energy (DOE) personnel at our meeting about how to restart Potomac River as quickly as possible after a shutdown. Letter Responding to Requests for Information Made by Department of Energy (DOE) Personnel About Restarting Potomac River After a Shutdown. More Documents & Publications Special Environmental Analysis For Actions Taken under U.S. Department of Energy Emergency Orders Regarding Operation of the Potomac River Generating

273

Home Automation in the Wild: Challenges and Opportunities  

E-Print Network (OSTI)

automation in two groups: 1) Do-it-yourselfers (DIY) who have installed automation themselves and 2 purposes [33]. To compare and contrast these two groups, we recruited both DIY and Outsourced households

Rajamani, Sriram K.

274

Automated Demand Response Strategies and Commissioning Commercial Building Controls  

E-Print Network (OSTI)

4 9 . Piette et at Automated Demand Response Strategies andDynamic Controls for Demand Response in New and ExistingFully Automated Demand Response Tests in Large Facilities"

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

275

Automated Battery Swap and Recharge to Enable Persistent UAV Missions  

E-Print Network (OSTI)

This paper introduces a hardware platform for automated battery changing and charging for multiple UAV agents. The automated station holds a bu er of 8 batteries in a novel dual-drum structure that enables a "hot" battery ...

Toksoz, Tuna

276

Automated and human proofs in general mathematics: an initial comparison  

Science Conference Proceedings (OSTI)

First-order translations of large mathematical repositories allow discovery of new proofs by automated reasoning systems. Large amounts of available mathematical knowledge can be re-used by combined AI/ATP systems, possibly in unexpected ways. But automated ...

Jesse Alama; Daniel Khlwein; Josef Urban

2012-03-01T23:59:59.000Z

277

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network (OSTI)

Report 2009. Open Automated Demand Response Communicationsand Techniques for Demand Response. California Energyand S. Kiliccote. Estimating Demand Response Load Impacts:

Kiliccote, Sila

2010-01-01T23:59:59.000Z

278

Performance of Integrated Systems of Automated Roller Shade Systems...  

NLE Websites -- All DOE Office Websites (Extended Search)

032011 Keywords automated roller shade systems, daylight responsive dimming systems, daylighting, Integrated systems, photoelectric controls Abstract Daylight responsive...

279

AN UPDATE ON THE DEVELOPMENT OF AN AUTOMATED ...  

Science Conference Proceedings (OSTI)

... An unconventional automated lipidomics approach (1) was designed by applying a liquid chromatography autosampler to draw up discrete ...

280

SYSTEMS AND METHODS FOR THE AUTONOMOUS CONTROL, AUTOMATED ...  

systems and methods for the autonomous control, automated guidance, and global coordination of moving process machinery united states patent application

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Context and Structure in Automated Full-Text Information Access  

E-Print Network (OSTI)

Context and Structure in Automated Full-Text Information Access Marti A. Hearst Report No. UCB 94720 #12;#12;Context and Structure in Automated Full-Text Information Access by Marti A. Hearst B and Structure in Automated Full-Text Information Access Copyright c 1994 by Marti A. Hearst #12;In memory of my

Hearst, Marti

282

Steam Generator Automated Eddy Current Data Analysis: A Benchmarking Study  

Science Conference Proceedings (OSTI)

This benchmarking study informs utility nondestructive evaluation (NDE) engineers of the status of automating analysis of data from steam generator tube eddy current testing. Study results will contribute to a detailed plan for continuing development of automated data analysis system processes. One day, automated data analysis will provide utilities with a consistent, accurate, and cost-effective method of analyzing eddy current inspection data.

1998-12-16T23:59:59.000Z

283

Automated Battery Swap and Recharge to Enable Persistent UAV Missions  

E-Print Network (OSTI)

Automated Battery Swap and Recharge to Enable Persistent UAV Missions Tuna Toksoz , Joshua Redding introduces a hardware platform for automated battery changing and charging for multiple UAV agents. The automated station holds a buffer of 8 batteries in a novel dual-drum structure that enables a "hot" battery

How, Jonathan P.

284

White Paper Series An Overview of Automated Enforcement  

E-Print Network (OSTI)

White Paper Series An Overview of Automated Enforcement Systems and Their Potential for Improving The following paper takes a widespread look at automated enforcement systems, specifically red-light cameras of drivers running red lights and speeding, the paper will define automated enforcement systems, the impact

North Carolina at Chapel Hill, University of

285

Docking automation related technology, Phase 2 report  

SciTech Connect

This report generalizes the progress for Phase II of the Docking Automated Related Technologies task component within the Modular Artillery Ammunition Delivery System (MAADS) technology demonstrator of the Future Armored Resupply Vehicle (FARV) project. This report also covers development activity at Oak Ridge National Laboratory (ORNL) during the period from January to July 1994.

Jatko, W.B.; Goddard, J.S.; Gleason, S.S.; Ferrell, R.K.

1995-04-01T23:59:59.000Z

286

Automated modeling of modular robotic configurations  

Science Conference Proceedings (OSTI)

This research presents an automated method to build kinematic and dynamic models for assembling modular components of modular robotic systems. By comparison with other approaches, the proposed method is applicable to any robotic configuration with serial, ... Keywords: Automatic modeling, Computer-aided design, Configuration design, Finite element method, Modular architecture, Modular robotic system, Reconfigurable robot

Z. M. Bi; W. A. Gruver; W. J. Zhang; S. Y. T. Lang

2006-12-01T23:59:59.000Z

287

Apparatus for automated testing of biological specimens  

DOE Patents (OSTI)

An apparatus for performing automated testing of infections biological specimens is disclosed. The apparatus comprise a process controller for translating user commands into test instrument suite commands, and a test instrument suite comprising a means to treat the specimen to manifest an observable result, and a detector for measuring the observable result to generate specimen test results.

Layne, Scott P. (Los Angeles, CA); Beugelsdijk, Tony J. (Los Alamos, NM)

1999-01-01T23:59:59.000Z

288

Focus Windows: A Tool for Automated Provers ?  

E-Print Network (OSTI)

Focus Windows: A Tool for Automated Provers ? Florina Piroi Research Institute For Symbolic or understand the validity of a particular step. Focus windows were #12;rst introduced as a technique for proof the implementation and the use of the focus windows technique in the frame of the Theorema system [3]. One

289

Safe controllers design for industrial automation systems  

Science Conference Proceedings (OSTI)

The design of safe industrial controllers is one of the most important domains related to Automation Systems research. To support it, synthesis and analysis techniques are available. Among the analysis techniques, two of the most important are Simulation ... Keywords: Formal verification, Industrial systems behaviour modelling, Real-time systems, Safe controllers, Simulation

Jos Machado; Eurico Seabra; Jos C. Campos; Filomena Soares; Celina P. Leo

2011-05-01T23:59:59.000Z

290

Automated reasoning service for HOL light  

Science Conference Proceedings (OSTI)

HOL(y)Hammer is an AI/ATP service for formal (computer-understandable) mathematics encoded in the HOL Light system, in particular for the users of the large Flyspeck library. The service uses several automated reasoning systems combined with several ...

Cezary Kaliszyk, Josef Urban

2013-07-01T23:59:59.000Z

291

Honeywell Modular Automation System Computer Software Documentation  

Science Conference Proceedings (OSTI)

This document provides a Computer Software Documentation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-211 and vertical denitration calciner in HC-230C-2.

CUNNINGHAM, L.T.

1999-09-27T23:59:59.000Z

292

Toward automation in hearing aid design  

Science Conference Proceedings (OSTI)

In the manufacturing of customized medical prostheses, such as in-the-ear hearing aids, the design process often is dictated by a source template representing the anatomy of a patient and a set of work instructions representing the description of surface ... Keywords: Application, Automation, CAD, CAM, Expert systems, Feature recognition, Hearing aid design, Medical prostheses manufacturing, Modeling, Rule-based systems, Shape transformation

Konrad Sickel; Sajjad Baloch; Rupen Melkisetoglu; Vojtech Bubnik; Sergei Azernikov; Tong Fang

2011-12-01T23:59:59.000Z

293

Salsbury and Diamond: Automated Testing of HVAC Systems for Commissioning -1 -Automated Testing of HVAC Systems for Commissioning  

E-Print Network (OSTI)

and Diamond: Automated Testing of HVAC Systems for Commissioning - 1 - Automated Testing of HVAC Systems This paper describes an approach to the automation of the commissioning of HVAC systems. The approach of many HVAC systems is limited more by poor installation, commissioning, and maintenance than by poor

294

Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response  

Science Conference Proceedings (OSTI)

This report summarizes San Diego Gas& Electric Company?s collaboration with the Demand Response Research Center to develop and test automation capability for the Capacity Bidding Program in 2007. The report describes the Open Automated Demand Response architecture, summarizes the history of technology development and pilot studies. It also outlines the Capacity Bidding Program and technology being used by an aggregator that participated in this demand response program. Due to delays, the program was not fully operational for summer 2007. However, a test event on October 3, 2007, showed that the project successfully achieved the objective to develop and demonstrate how an open, Web?based interoperable automated notification system for capacity bidding can be used by aggregators for demand response. The system was effective in initiating a fully automated demand response shed at the aggregated sites. This project also demonstrated how aggregators can integrate their demand response automation systems with San Diego Gas& Electric Company?s Demand Response Automation Server and capacity bidding program.

Kiliccote, Sila; Piette, Mary Ann

2008-10-01T23:59:59.000Z

295

Sabbath Day Home Automation: "It's Like Mixing Technology and Religion"  

E-Print Network (OSTI)

We present a qualitative study of 20 American Orthodox Jewish families' use of home automation for religious purposes. These lead users offer insight into real-life, long-term experience with home automation technologies. We discuss how automation was seen by participants to contribute to spiritual experience and how participants oriented to the use of automation as a religious custom. We also discuss the relationship of home automation to family life. We draw design implications for the broader population, including surrender of control as a design resource, home technologies that support long-term goals and lifestyle choices, and respite from technology.

Woodruff, Allison; Foucault, Brooke

2007-01-01T23:59:59.000Z

296

Installation and Commissioning Automated Demand Response Systems  

Science Conference Proceedings (OSTI)

Demand Response (DR) can be defined as actions taken to reduce electric loads when contingencies, such as emergencies and congestion, occur that threaten supply-demand balance, or market conditions raise supply costs. California utilities have offered price and reliability DR based programs to customers to help reduce electric peak demand. The lack of knowledge about the DR programs and how to develop and implement DR control strategies is a barrier to participation in DR programs, as is the lack of automation of DR systems. Most DR activities are manual and require people to first receive notifications, and then act on the information to execute DR strategies. Levels of automation in DR can be defined as follows. Manual Demand Response involves a labor-intensive approach such as manually turning off or changing comfort set points at each equipment switch or controller. Semi-Automated Demand Response involves a pre-programmed demand response strategy initiated by a person via centralized control system. Fully-Automated Demand Response does not involve human intervention, but is initiated at a home, building, or facility through receipt of an external communications signal. The receipt of the external signal initiates pre-programmed demand response strategies. We refer to this as Auto-DR (Piette et. al. 2005). Auto-DR for commercial and industrial facilities can be defined as fully automated DR initiated by a signal from a utility or other appropriate entity and that provides fully-automated connectivity to customer end-use control strategies. One important concept in Auto-DR is that a homeowner or facility manager should be able to 'opt out' or 'override' a DR event if the event comes at time when the reduction in end-use services is not desirable. Therefore, Auto-DR is not handing over total control of the equipment or the facility to the utility but simply allowing the utility to pass on grid related information which then triggers facility defined and programmed strategies if convenient to the facility. From 2003 through 2006 Lawrence Berkeley National Laboratory (LBNL) and the Demand Response Research Center (DRRC) developed and tested a series of demand response automation communications technologies known as Automated Demand Response (Auto-DR). In 2007, LBNL worked with three investor-owned utilities to commercialize and implement Auto-DR programs in their territories. This paper summarizes the history of technology development for Auto-DR, and describes the DR technologies and control strategies utilized at many of the facilities. It outlines early experience in commercializing Auto-DR systems within PG&E DR programs, including the steps to configure the automation technology. The paper also describes the DR sheds derived using three different baseline methodologies. Emphasis is given to the lessons learned from installation and commissioning of Auto-DR systems, with a detailed description of the technical coordination roles and responsibilities, and costs.

Global Energy Partners; Pacific Gas and Electric Company; Kiliccote, Sila; Kiliccote, Sila; Piette, Mary Ann; Wikler, Greg; Prijyanonda, Joe; Chiu, Albert

2008-04-21T23:59:59.000Z

297

Automated analysis and validation of open chemical data  

E-Print Network (OSTI)

Environment IETF Internet Engineering Task Force xvi InChI IUPAC International Chemical Identifier IUCr International Union of Crystallography IUPAC International Union of Pure and Applied Chemistry JAR Java Archive MIME Multipurpose Internet Mail Extension MM...

Day, Nicholas E

2009-01-13T23:59:59.000Z

298

Automated Vehicle-to-Vehicle Collision Avoidance at Intersections  

E-Print Network (OSTI)

@umich.edu 2. Toyota Technical Center, Toyota Engineering and Manufacturing North America 1555 Woodridge Ave., Ann Arbor, MI 48105 Phone: (617)452-2275, Fax: (734)995-3053, E-mail: lorenzo.caminiti@tema.toyota

Del Vecchio, Domitilla

299

AeroSys, Inc. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Respondent Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 20 l 1-SCE-1624 By authority of the Secretary, U.S. Department of Energy: I . In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE») and AeroSys, Inc. {"Respondent"). The Compromise Agreement resolves the case initiated to pmsue a civil penalty for violations of DOE regulatory requirements at 10 C.F.R. §§ 429.12, 429.16, and 430.32(c). 2. The DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

300

Education of First Responders at Yale | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Education of First Responders at Yale Education of First Responders at Yale Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Spinoff Applications Spinoff Archives SBIR/STTR Applications of Nuclear Science and Technology Funding Opportunities Nuclear Science Advisory Committee (NSAC) News & Resources Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3613 F: (301) 903-3833 E: sc.np@science.doe.gov More Information » Spinoff Archives Education of First Responders at Yale Print Text Size: A A A RSS Feeds FeedbackShare Page Application/instrumentation: Course on Basic Radiation Physics for First Responders Developed at: Yale University/Wright Nuclear Structure Laboratory

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Look at this: the neural correlates of initiating and responding to bids for joint attention  

E-Print Network (OSTI)

When engaging in joint attention, one person directs another person's attention to an object (Initiating Joint Attention, IJA), and the second person's attention follows (Responding to Joint Attention, RJA). As such, joint ...

Redcay, Elizabeth

302

SANYO E &E Corp., Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SANYO E &E Corp., Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 2010-CE-1210 Issued: October 13,2010 By the General Counsel,...

303

Direct versus Facility Centric Load Control for Automated Demand Response  

SciTech Connect

Direct load control (DLC) refers to the scenario where third party entities outside the home or facility are responsible for deciding how and when specific customer loads will be controlled in response to Demand Response (DR) events on the electric grid. Examples of third parties responsible for performing DLC may be Utilities, Independent System Operators (ISO), Aggregators, or third party control companies. DLC can be contrasted with facility centric load control (FCLC) where the decisions for how loads are controlled are made entirely within the facility or enterprise control systems. In FCLC the facility owner has more freedom of choice in how to respond to DR events on the grid. Both approaches are in use today in automation of DR and both will continue to be used in future market segments including industrial, commercial and residential facilities. This paper will present a framework which can be used to differentiate between DLC and FCLC based upon where decisions are made on how specific loads are controlled in response to DR events. This differentiation is then used to compare and contrast the differences between DLC and FCLC to identify the impact each has on:(1)Utility/ISO and third party systems for managing demand response, (2)Facility systems for implementing load control, (3)Communications networks for interacting with the facility and (4)Facility operators and managers. Finally a survey of some of the existing DR related specifications and communications standards is given and their applicability to DLC or FCLC. In general FCLC adds more cost and responsibilities to the facilities whereas DLC represents higher costs and complexity for the Utility/ISO. This difference is primarily due to where the DR Logic is implemented and the consequences that creates. DLC may be more certain than FCLC because it is more predictable - however as more loads have the capability to respond to DR signals, people may prefer to have their own control of end-use loads and FCLC systems. Research is needed to understand the predictability of FCLC which is related to the perceived value of the DR from the facility manager or home owner's perspective.

Koch, Ed; Piette, Mary Ann

2009-11-06T23:59:59.000Z

304

Definition: Automated Voltage Regulators | Open Energy Information  

Open Energy Info (EERE)

Regulators Regulators Jump to: navigation, search Dictionary.png Automated Voltage Regulators Voltage regulators are transformers that can increase or decrease the voltage on a distribution circuit to help keep the voltage within a pre-determined band. Unlike capacitor banks, voltage regulators cannot adjust power factor. These devices typically monitor the voltage at the location where they are connected, and compare it to a programmed set point. If the voltage deviates too far from the set point, the voltage regulator can increase or decrease its output voltage by moving the tap on the secondary side up or down. An automated voltage regulator can operate with remote control signals, or in concert with other area voltage control devices, to help regulate distribution voltage in a coordinated fashion.

305

DAVIC - Distributed Energy Automation via Implicit Communication  

NLE Websites -- All DOE Office Websites (Extended Search)

DAVIC - Distributed Energy Automation via Implicit Communication DAVIC - Distributed Energy Automation via Implicit Communication Speaker(s): Peter Palensky Date: January 22, 2008 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Peng Xu The electricity grid is seen as a wide-area distributed process, determined by its sub-processes - in our case the loads and distributed generation. Network-based coordination needs to be done very carefully and properly timed to avoid instabilities. Luckily, every point of the grid has the same grid frequency and the same time. Integrating these two trivial things (implicit communication) into one consistent communication model might complement a low-quality (explicit) best-effort communication channel (e.g. Internet, GPRS) for real time applications. A simulation shall clarify how

306

home automation | OpenEI Community  

Open Energy Info (EERE)

91 91 Varnish cache server Home Groups Community Central Green Button Applications Developer Utility Rate FRED: FRee Energy Database More Public Groups Private Groups Features Groups Blog posts Content Stream Documents Discussions Polls Q & A Events Notices My stuff Energy blogs 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142285591 Varnish cache server home automation Home Graham7781's picture Submitted by Graham7781(2002) Super contributor 23 January, 2013 - 13:57 The Consumer Electronics Show round-up CES electronics home automation Las Vegas OpenEI Smart Grid Every January, Las Vegas hosts the Consumer Electronics Show. The CES is the world's largest technology-related trade show. The highlights of this year's show were OLED TVs, ultra-thin laptops,

307

Automated Hydroforming of Seamless Superconducting RF Cavity  

SciTech Connect

We are studying the possibility of automated hydroforming process for seamless superconducting RF cavities. Preliminary hydroforming tests of three-cell cavities from seamless tubes made of C1020 copper have been performed. The key point of an automated forming is to monitor and strictly control some parameters such as operation time, internal pressure and material displacements. Especially, it is necessary for our studies to be able to control axial and radial deformation independently. We plan to perform the forming in two stages to increase the reliability of successful forming. In the first stage hydroforming by using intermediate constraint dies, three-cell cavities were successfully formed in less than 1 minute. In parallel, we did elongation tests on cavity-quality niobium and confirmed that it is possible to achieve an elongation of >64% in 2 stages that is required for our forming of 1.3 GHz cavities.

Nagata, Tomohiko [ULVAC, Inc.; Shinozawa, Seiichi [ULVAC, Inc.; Abe, Noriyuki [ULVAC, Inc.; Nagakubo, Junki [ULVAC, Inc.; Murakami, Hirohiko [ULVAC, Inc.; Tajima, Tsuyoshi [Los Alamos National Laboratory; Inoue, Hitoshi [High Energy Accelerator Research Organization, KEK; Yamanaka, Masashi [High Energy Accelerator Research Organization, KEK; Ueno, Kenji [High Energy Accelerator Research Organization, KEK

2012-07-31T23:59:59.000Z

308

A Modular Architecture for Building Automation Systems  

E-Print Network (OSTI)

The deployment of building automation systems (BAS) allows to increase comfort, safety and security and to reduce operational cost. Today such systems typically follow a two-layered hierarchical approach. While control networks interconnect distributed sensors, actuators and controllers, a backbone provides the necessary infrastructure for management tasks hosted by configuration and management devices. In addition, devices interconnecting the control network with the backbone and the backbone with further networks (e.g., the Internet) play a strategic role. All BAS devices contributing to a particular functionality differ in their requirements for hardware. This paper discusses requirements for devices used in the building automation domain and presents our work in progress to assemble platforms with different purposes relying on a modular architecture. 1

Wolfgang Granzer; Wolfgang Kastner; Georg Neugschw; Fritz Praus

2006-01-01T23:59:59.000Z

309

Automation impact study of Army Training Management  

SciTech Connect

The main objectives of this impact study were to identify the potential cost savings associated with automated Army Training Management (TM), and to perform a cost-benefit analysis for an Army-wide automated TM system. A subsidiary goal was to establish baseline data for an independent evaluation of a prototype Integrated Training Management System (ITMS), to be tested in the fall of 1988. A structured analysis of TM doctrine was performed for comparison with empirical data gathered in a job analysis survey of selected units of the 9ID (MTZ) at Ft. Lewis, Washington. These observations will be extended to other units in subsequent surveys. The survey data concerning staffing levels and amount of labor expended on eight distinct TM tasks were analyzed in a cost effectiveness model. The main results of the surveys and cost effectiveness modelling are summarized. 18 figs., 47 tabs.

Sanquist, T.F.; Schuller, C.R.; McCallum, M.C.; Underwood, J.A.; Bettin, P.J.; King, J.L.; Melber, B.D.; Hostick, C.J.; Seaver, D.A.

1988-01-01T23:59:59.000Z

310

Flow through electrode with automated calibration  

DOE Patents (OSTI)

The present invention is an improved automated flow through electrode liquid monitoring system. The automated system has a sample inlet to a sample pump, a sample outlet from the sample pump to at least one flow through electrode with a waste port. At least one computer controls the sample pump and records data from the at least one flow through electrode for a liquid sample. The improvement relies upon (a) at least one source of a calibration sample connected to (b) an injection valve connected to said sample outlet and connected to said source, said injection valve further connected to said at least one flow through electrode, wherein said injection valve is controlled by said computer to select between said liquid sample or said calibration sample. Advantages include improved accuracy because of more frequent calibrations, no additional labor for calibration, no need to remove the flow through electrode(s), and minimal interruption of sampling.

Szecsody, James E [Richland, WA; Williams, Mark D [Richland, WA; Vermeul, Vince R [Richland, WA

2002-08-20T23:59:59.000Z

311

Algorithms to Automate LCLS Undulator Tuning  

Science Conference Proceedings (OSTI)

Automation of the LCLS undulator tuning offers many advantages to the project. Automation can make a substantial reduction in the amount of time the tuning takes. Undulator tuning is fairly complex and automation can make the final tuning less dependent on the skill of the operator. Also, algorithms are fixed and can be scrutinized and reviewed, as opposed to an individual doing the tuning by hand. This note presents algorithms implemented in a computer program written for LCLS undulator tuning. The LCLS undulators must meet the following specifications. The maximum trajectory walkoff must be less than 5 {micro}m over 10 m. The first field integral must be below 40 x 10{sup -6} Tm. The second field integral must be below 50 x 10{sup -6} Tm{sup 2}. The phase error between the electron motion and the radiation field must be less than 10 degrees in an undulator. The K parameter must have the value of 3.5000 {+-} 0.0005. The phase matching from the break regions into the undulator must be accurate to better than 10 degrees. A phase change of 113 x 2{pi} must take place over a distance of 3.656 m centered on the undulator. Achieving these requirements is the goal of the tuning process. Most of the tuning is done with Hall probe measurements. The field integrals are checked using long coil measurements. An analysis program written in Matlab takes the Hall probe measurements and computes the trajectories, phase errors, K value, etc. The analysis program and its calculation techniques were described in a previous note. In this note, a second Matlab program containing tuning algorithms is described. The algorithms to determine the required number and placement of the shims are discussed in detail. This note describes the operation of a computer program which was written to automate LCLS undulator tuning. The algorithms used to compute the shim sizes and locations are discussed.

Wolf, Zachary

2010-12-03T23:59:59.000Z

312

Automated Methods for Multiplexed Pathogen Detection  

Science Conference Proceedings (OSTI)

Detection of pathogenic microorganisms in environmental samples is a difficult process. Concentration of the organisms of interest also co-concentrates inhibitors of many end-point detection methods, notably, nucleic acid methods. In addition, sensitive, highly multiplexed pathogen detection continues to be problematic. The primary function of the BEADS (Biodetection Enabling Analyte Delivery System) platform is the automated concentration and purification of target analytes from interfering substances, often present in these samples, via a renewable surface column. In one version of BEADS, automated immunomagnetic separation (IMS) is used to separate cells from their samples. Captured cells are transferred to a flow-through thermal cycler where PCR, using labeled primers, is performed. PCR products are then detected by hybridization to a DNA suspension array. In another version of BEADS, cell lysis is performed, and community RNA is purified and directly labeled. Multiplexed detection is accomplished by direct hybridization of the RNA to a planar microarray. The integrated IMS/PCR version of BEADS can successfully purify and amplify 10 E. coli O157:H7 cells from river water samples. Multiplexed PCR assays for the simultaneous detection of E. coli O157:H7, Salmonella, and Shigella on bead suspension arrays was demonstrated for the detection of as few as 100 cells for each organism. Results for the RNA version of BEADS are also showing promising results. Automation yields highly purified RNA, suitable for multiplexed detection on microarrays, with microarray detection specificity equivalent to PCR. Both versions of the BEADS platform show great promise for automated pathogen detection from environmental samples. Highly multiplexed pathogen detection using PCR continues to be problematic, but may be required for trace detection in large volume samples. The RNA approach solves the issues of highly multiplexed PCR and provides ''live vs. dead'' capabilities. However, sensitivity of the method will need to be improved for RNA analysis to replace PCR.

Straub, Tim M.; Dockendorff, Brian P.; Quinonez-Diaz, Maria D.; Valdez, Catherine O.; Shutthanandan, Janani I.; Tarasevich, Barbara J.; Grate, Jay W.; Bruckner-Lea, Cindy J.

2005-09-01T23:59:59.000Z

313

Energy Automation Systems Inc | Open Energy Information  

Open Energy Info (EERE)

Energy Automation Systems Inc Energy Automation Systems Inc Jump to: navigation, search Name Energy Automation Systems Inc. Place Hendersonville, Tennessee Zip 37075 Sector Buildings, Efficiency Product An energy efficiency consultancy firm focusing on analysis of energy consumption in buildings and providing improvments in the efficiency of the distribution system and equipment loads, similar to an ESCO. Coordinates 36.304861°, -86.620214° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":36.304861,"lon":-86.620214,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

314

Science Education Mailing Lists  

NLE Websites -- All DOE Office Websites (Extended Search)

programs that are open to the general public. Events, such as the Jefferson Lab Science Series and the Jefferson Lab Open House, will be announced through this list. To...

315

UTC e-mail  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Koonin, Steven Koonin, Steven Sent: Wednesday, April 20, 2011 8:35 AM To: DL-SC DOE-QER-TEAM Subject: FW: Fuel Cells in the QTR Attachments: Department of Energy Framing Document Ltr 041511.pdf Follow Up Flag: Follow up Flag Status: Flagged Categories: QTR Transparency From: McQuade, J. Michael UTCHQ [mailto:J.Michael.McQuade@utc.com] Sent: Wednesday, April 20, 2011 8:32 AM To: Majumdar, Arun; Koonin, Steven Subject: Fuel Cells in the QTR Steve, Arun, First, a very big compliment to you, Steve, on the quality and depth of the QTR Framing Document that was released for public comment. As you both know better than me, these processes are in many ways defined and constrained by the initial context in which they are communicated, and a terms of reference that misses the mark can make an entire, vital process doomed from the start. We

316

VIA ELECTRONIC MAIL  

E-Print Network (OSTI)

Attached please find comments submitted on behalf of the Bipartisan Policy Center in regards to the 2012 LNG Export Study. Best,

David Rosner; Tracy Terry; Margot Anderson; David Rosner

2013-01-01T23:59:59.000Z

317

Canada Post Publications Mail  

E-Print Network (OSTI)

Commission Dr. Maxine Smith, Memphis Honorable Lana Seivers, Commissioner of Education Mr. William Watkins Buccaneer golfers and coaches,and supporters of the ETSU golf program,for the dedication of The Frederick B.Warren-William

Brownstone, Rob

318

Home Network Technologies and Automating Demand Response  

Science Conference Proceedings (OSTI)

Over the past several years, interest in large-scale control of peak energy demand and total consumption has increased. While motivated by a number of factors, this interest has primarily been spurred on the demand side by the increasing cost of energy and, on the supply side by the limited ability of utilities to build sufficient electricity generation capacity to meet unrestrained future demand. To address peak electricity use Demand Response (DR) systems are being proposed to motivate reductions in electricity use through the use of price incentives. DR systems are also be design to shift or curtail energy demand at critical times when the generation, transmission, and distribution systems (i.e. the 'grid') are threatened with instabilities. To be effectively deployed on a large-scale, these proposed DR systems need to be automated. Automation will require robust and efficient data communications infrastructures across geographically dispersed markets. The present availability of widespread Internet connectivity and inexpensive, reliable computing hardware combined with the growing confidence in the capabilities of distributed, application-level communications protocols suggests that now is the time for designing and deploying practical systems. Centralized computer systems that are capable of providing continuous signals to automate customers reduction of power demand, are known as Demand Response Automation Servers (DRAS). The deployment of prototype DRAS systems has already begun - with most initial deployments targeting large commercial and industrial (C & I) customers. An examination of the current overall energy consumption by economic sector shows that the C & I market is responsible for roughly half of all energy consumption in the US. On a per customer basis, large C & I customers clearly have the most to offer - and to gain - by participating in DR programs to reduce peak demand. And, by concentrating on a small number of relatively sophisticated energy consumers, it has been possible to improve the DR 'state of the art' with a manageable commitment of technical resources on both the utility and consumer side. Although numerous C & I DR applications of a DRAS infrastructure are still in either prototype or early production phases, these early attempts at automating DR have been notably successful for both utilities and C & I customers. Several factors have strongly contributed to this success and will be discussed below. These successes have motivated utilities and regulators to look closely at how DR programs can be expanded to encompass the remaining (roughly) half of the state's energy load - the light commercial and, in numerical terms, the more important residential customer market. This survey examines technical issues facing the implementation of automated DR in the residential environment. In particular, we will look at the potential role of home automation networks in implementing wide-scale DR systems that communicate directly to individual residences.

McParland, Charles

2009-12-01T23:59:59.000Z

319

V-132: IBM Tivoli System Automation Application Manager Multiple  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: IBM Tivoli System Automation Application Manager Multiple 2: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which may affect the product REFERENCE LINKS: Secunia Advisory: SA53006 IBM Security Bulletin 21633991 IBM Security Bulletin 21633992 CVE-2011-3563 CVE-2012-0497 CVE-2012-0498 CVE-2012-0499 CVE-2012-0501

320

V-132: IBM Tivoli System Automation Application Manager Multiple  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: IBM Tivoli System Automation Application Manager Multiple 2: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which may affect the product REFERENCE LINKS: Secunia Advisory: SA53006 IBM Security Bulletin 21633991 IBM Security Bulletin 21633992 CVE-2011-3563 CVE-2012-0497 CVE-2012-0498 CVE-2012-0499 CVE-2012-0501

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Nearly 3,000 Emergency Responders Receive EM Training | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3,000 Emergency Responders Receive EM Training 3,000 Emergency Responders Receive EM Training Nearly 3,000 Emergency Responders Receive EM Training February 26, 2013 - 12:00pm Addthis In a mock scenario, firefighters work with an accident victim during a Transportation Emergency Preparedness Program full field exercise In a mock scenario, firefighters work with an accident victim during a Transportation Emergency Preparedness Program full field exercise Students learn to identify labels and use instruments during a Transportation Emergency Preparedness Program class Students learn to identify labels and use instruments during a Transportation Emergency Preparedness Program class In a mock scenario, firefighters work with an accident victim during a Transportation Emergency Preparedness Program full field exercise

322

Two New Studies Show How Energy Consumers Respond to Smart Grid Technology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Studies Show How Energy Consumers Respond to Smart Grid New Studies Show How Energy Consumers Respond to Smart Grid Technology Two New Studies Show How Energy Consumers Respond to Smart Grid Technology February 14, 2011 - 3:24pm Addthis Home-energy display mobile phone application that shows how much energy an appliance is consuming. | Photo courtesy of Pecan Street Project. Home-energy display mobile phone application that shows how much energy an appliance is consuming. | Photo courtesy of Pecan Street Project. Matt Grosso Program Analyst, Office of Electricity Delivery & Energy Reliability What does this mean for me? Home smart grid technologies can help consumers save money -- and they use them to save money. Customers are willing to change the way they use electricity in response to home smart grid systems and dynamic pricing programs that save

323

Navien America, Inc., Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Navien America, Inc., Navien America, Inc., Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 2010-CE-1712 Issued: September 20, 2010 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE'') and Navien, America, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements at 10 C.P.R. § 430.62. 2. The DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and ·incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

324

Dade Engineering Corp. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Dade Engineering Corp. Dade Engineering Corp. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2013-CE-5316 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Dade Engineering Corp. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at I 0 C.F.R. §§ 429.12 and 429.53. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

325

Ingersoll-Rand Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ingersoll-Rand Ingersoll-Rand Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY Washington, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2012-SE-1608 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Ingersoll-Rand ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for distribution in commerce of units of a basic model of covered product that fail to meet the energy conservation requirements located at 10 C.F.R. § 430.32( c ). 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated

326

Leer, Inc. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Leer, Inc. Leer, Inc. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2013-CE-5325 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Leer, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations ofthe compliance certification requirements located at 10 C.F.R. §§ 429.12 and 429.53. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the tenus of the Compromise Agreement and evaluating the facts

327

USA Manufacturing Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

USA Manufacturing USA Manufacturing Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2013-CE-5336 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department ofEnet'gy ("DOE") and USA Manufacturing ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.P.R.§§ 429.12 and 429.53. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

328

Southeast Cooler Corp. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Southeast Cooler Corp. Southeast Cooler Corp. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2013-CE-5331 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Southeast Cooler Corp. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.P.R.§§ 429.12 and 429.53. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

329

Kold Pacl,, Inc. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Kold Pacl,, Inc. Kold Pacl,, Inc. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2013-CE-5323 By the General Counsel, U.S. Depatiment of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Kold Pack, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. §§ 429.12 and 429.53. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

330

Jamison Door Company Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Jamison Door Company Jamison Door Company Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2013-CE-5348 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Jamison Door Company ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. §§ 429.12 and 429.53. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

331

Mueller Streamline Co., Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, , Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2011-SW-2802 December 1, 2011 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Mueller Streamline Co. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of Federal water conservation requirements at 10 C.F.R. § 430.32(o) and 42 U.S.C. § 6295(j). 2. The DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the

332

Amerisink, Inc., Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, , Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 2010-CW-0710 Issued: September 28, 2010 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Amerisink, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements at 10 C.F.R. § 430.62. 2. The DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the

333

Central Moloney, Inc. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Central Moloney, Inc. Central Moloney, Inc. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2013-SE-4702 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Central Moloney, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for distribution in commerce in the U.S. of basic models of a covered product that failed to meet the energy conservation requirements as described at 10 C.F.R. § 431.196. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated

334

Commercial Cooler, Inc. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial Cooler, Inc. Commercial Cooler, Inc. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2013-CE-5343 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Commercial Cooler, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at I 0 C.F.R. §§ 429.12 and 429.53. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

335

Data for First Responder Use of Photoionization Detectors for Vapor Chemical Constituents  

SciTech Connect

First responders need appropriate measurement technologies for evaluating incident scenes. This report provides information about photoionization detectors (PIDs), obtained from manufacturers and independent laboratory tests, and the use of PIDs by first responders, obtained from incident commanders in the United States and Canada. PIDs are valued for their relatively low cost, light weight, rapid detection response, and ease of use. However, it is clear that further efforts are needed to provide suitable instruments and decision tools to incident commanders and first responders for assessing potential hazardous chemical releases. Information provided in this report indicates that PIDs should always be part of a decision-making context in which other qualitative and more definitive tests and instruments are used to confirm a finding. Possible amelioratory actions ranging from quick and relatively easy fixes to those requiring significant additional effort are outlined in the report.

Keith A. Daum; Matthew G. Watrous; M. Dean Neptune; Daniel I. Michael; Kevin J. Hull; Joseph D. Evans

2006-11-01T23:59:59.000Z

336

Amerikooler, Inc. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Amerikooler, Inc. Amerikooler, Inc. Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2013-CE-5307 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Amerikooler, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. §§ 429.12 and 429.53. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

337

Custom Coolers, LLC Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Custom Coolers, LLC Custom Coolers, LLC Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2013-CE-5315 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Custom Coolers, LLC ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations ofthe compliance certification requirements located at 10 C.F.R. §§ 429.12 and 429.53. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

338

EL Program: Next-Generation Robotics and Automation  

Science Conference Proceedings (OSTI)

... and automation technologies for smart manufacturing and cyber-physical systems ... robotics technology holds the potential to transform the future of ...

2013-01-02T23:59:59.000Z

339

Definition: Automated Islanding And Reconnection | Open Energy Information  

Open Energy Info (EERE)

Islanding And Reconnection Islanding And Reconnection Jump to: navigation, search Dictionary.png Automated Islanding And Reconnection Automated Islanding and Reconnection Automated islanding and reconnection is achieved by automated separation and subsequent reconnection (autonomous synchronization) of an independently operated portion of the T&D system (i.e., microgrid) from the interconnected electric grid. A microgrid is an integrated energy system consisting of interconnected loads and distributed energy resources which, as an integrated system, can operate in parallel with the grid or as an island.[1] View on Wikipedia Wikipedia Definition Islanding refers to the condition in which a distributed (DG) generator continues to power a location even though electrical grid power

340

Industrial SPP/Partner Teaming Profile - Rockwell Automation  

NLE Websites -- All DOE Office Websites (Extended Search)

the system at 14 General Mills facilities. Project Summary The project was to design an EMS for dramatically different AHUs. Rockwell Automation worked with General Mills...

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Direct versus Facility Centric Load Control for Automated Demand Response  

E-Print Network (OSTI)

Interoperable Automated Demand Response Infrastructure.and Techniques for Demand Response. LBNL Report 59975. Mayand Communications for Demand Response and Energy Efficiency

Piette, Mary Ann

2010-01-01T23:59:59.000Z

342

Linking Continuous Energy Management and Open Automated Demand Response  

E-Print Network (OSTI)

A. Barat, D. Watson. Demand Response Spinning ReserveOpen Automated Demand Response Communication Standards:Dynamic Controls for Demand Response in a New Commercial

Piette, Mary Ann

2009-01-01T23:59:59.000Z

343

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network (OSTI)

reliability signals for demand response GTA HTTPS HVAC IT kWand Commissioning Automated Demand Response Systems. and Techniques for Demand Response. California Energy

Kiliccote, Sila

2010-01-01T23:59:59.000Z

344

Measurement and evaluation techniques for automated demand response demonstration  

E-Print Network (OSTI)

Development for Demand Response Calculation Findings andManagement and Demand Response in Commercial Buildings. of Fully Automated Demand Response in Large Facilities.

Motegi, Naoya; Piette, Mary Ann; Watson, David S.; Sezgen, Osman; ten Hope, Laurie

2004-01-01T23:59:59.000Z

345

Results and commissioning issues from an automated demand response pilot  

E-Print Network (OSTI)

Conference on Building Commissioning. May 2002. Motegi,et al: Results and Commissioning Issues from an AutomatedConference on Building Commissioning: May 1e-20, 2004

Piette, Mary Ann; Watson, Dave; Sezgen, Osman; Motegi, Naoya

2004-01-01T23:59:59.000Z

346

Safety Aware Platooning of Automated Electric Transport Vehicles.  

E-Print Network (OSTI)

??Safety is a paramount concern when considering implementation of an automated highway where computers control the vehicles. Even with computer-fast reaction time there is inevitably (more)

Jackson, Spencer Scott

2013-01-01T23:59:59.000Z

347

Automated Diagnostics and Soft-Repair for Smart Homes  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated fault detection and diagnosis (AFDD) (<<1%) *&1; Around-the-clock protection and optimization *&1; Energy savings and longer equipment life *&1; Condition-based maintenance...

348

Automated Soil Gas Monitoring Chamber - Oak Ridge National ...  

Automated Soil Gas Monitoring Chamber ... A chamber for trapping soil gases as they evolve from the soil without disturbance to the soil and to the natural

349

HEADLINE: DOE Pursues Automation in West Virginia Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

assigned to their definition of a Smart Grid. So, what exactly does this Smart Grid distribution automation system look like? As always, interoperability is a factor. First, it's...

350

How to respond to data requests in Portfolio Manager | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

to respond to data requests in Portfolio Manager to respond to data requests in Portfolio Manager Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories

351

PUCK: an automated prompting system for smart environments: toward achieving automated prompting--challenges involved  

Science Conference Proceedings (OSTI)

The growth in popularity of smart environments has been quite steep in the last decade and so has the demand for smart health assistance systems. A smart home-based prompting system can enhance these technologies to deliver in-home interventions to users ... Keywords: Automated prompting, Imbalanced class distribution, Machine learning, Prompting systems, Smart environments

Barnan Das; Diane J. Cook; Maureen Schmitter-Edgecombe; Adriana M. Seelye

2012-10-01T23:59:59.000Z

352

AUTOMATED PROCESS MONITORING: APPLYING PROVEN AUTOMATION TECHNIQUES TO INTERNATIONAL SAFEGUARDS NEEDS  

SciTech Connect

Identification and quantification of specific alpha- and beta-emitting radionuclides in complex liquid matrices is highly challenging, and is typically accomplished through laborious wet chemical sample preparation and separations followed by analysis using a variety of detection methodologies (e.g., liquid scintillation, gas proportional counting, alpha energy analysis, mass spectrometry). Analytical results may take days or weeks to report. Chains of custody and sample security measures may also complicate or slow the analytical process. When an industrial process-scale plant requires the monitoring of specific radionuclides as an indication of the composition of its feed stream or of plant performance, radiochemical measurements must be fast, accurate, and reliable. Scientists at Pacific Northwest National Laboratory have assembled a fully automated prototype Process Monitor instrument capable of a variety of tasks: automated sampling directly from a feed stream, sample digestion / analyte redox adjustment, chemical separations, radiochemical detection and data analysis / reporting. The system is compact, its components are fluidically inter-linked, and analytical results could be immediately transmitted to on- or off-site locations. The development of a rapid radiochemical Process Monitor for 99Tc in Hanford tank waste processing streams, capable of performing several measurements per hour, will be discussed in detail. More recently, the automated platform was modified to perform measurements of 90Sr in Hanford tank waste stimulant. The system exemplifies how automation could be integrated into reprocessing facilities to support international nuclear safeguards needs.

O'Hara, Matthew J.; Durst, Philip C.; Grate, Jay W.; Devol, Timothy A.; Egorov, Oleg; Clements, John P.

2008-07-13T23:59:59.000Z

353

Automated flow-temperature-humidity control system  

SciTech Connect

An automated system that controls air flow, temperature, and humidity was developed from a commercially available temperature-humidity indicator and a specially built flow-temperature-humidity control module. Parameters are set using direct-reading dials on the control module. The air flow is maintained using a mass-flow controller while process controllers connected to the indicator regulate humidity and temperature. The system will run indefinitely without need for operator intervention. If the module and indicator are calibrated properly, accurate air flows (+-2% of full scale), temperatures (+-0.3/sup 0/C), and humidities (+-2% RH) can be achieved.

Nelson, G.O.; Taylor, R.D.

1980-10-01T23:59:59.000Z

354

Automated Knowledge Annotation for Dynamic Collaborative Environments  

Science Conference Proceedings (OSTI)

This paper describes the Knowledge Encapsulation Framework (KEF), a suite of tools to enable automated knowledge annotation for modeling and simulation projects. This framework can be used to capture evidence (e.g., facts extracted from journal articles and government reports), discover new evidence (from similar peer-reviewed material as well as social media), enable discussions surrounding domain-specific topics and provide automatically generated semantic annotations for improved corpus investigation. The current KEF implementation is presented within a wiki environment, providing a simple but powerful collaborative space for team members to review, annotate, discuss and align evidence with their modeling frameworks.

Cowell, Andrew J.; Gregory, Michelle L.; Marshall, Eric J.; McGrath, Liam R.

2009-05-19T23:59:59.000Z

355

Honeywell Modular Automation System Computer Software Documentation  

SciTech Connect

The purpose of this Computer Software Document (CSWD) is to provide configuration control of the Honeywell Modular Automation System (MAS) in use at the Plutonium Finishing Plant (PFP). This CSWD describes hardware and PFP developed software for control of stabilization furnaces. The Honeywell software can generate configuration reports for the developed control software. These reports are described in the following section and are attached as addendum's. This plan applies to PFP Engineering Manager, Thermal Stabilization Cognizant Engineers, and the Shift Technical Advisors responsible for the Honeywell MAS software/hardware and administration of the Honeywell System.

STUBBS, A.M.

2000-12-04T23:59:59.000Z

356

Evaluatoni of Automated Utility Bill Calibration Methods  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. Evaluation of Automated Utility Bill Calibration Methods BA Technical Update Meeting Ben Polly, Joe Robertson 04/30/13 Utility Bill Calibration * "Calibrate" or "true-up" building energy models to utility bill data to increase the accuracy of retrofit savings predictions * Calibration methods typically involve adjusting input parameters * Predict retrofit savings using the adjusted (calibrated) model 2 Background: BESTEST-EX * BESTEST-EX is a suite for testing calibration methods and retrofit savings predictions associated with audit software * Field trials showed that:

357

Anticipates and Responds to System Disturbances (Self-Heals) | Open Energy  

Open Energy Info (EERE)

Anticipates and Responds to System Disturbances (Self-Heals) Anticipates and Responds to System Disturbances (Self-Heals) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Anticipates and Responds to System Disturbances (Self-Heals) Focus Area: Crosscutting Topics: Policy Impacts Website: www.netl.doe.gov/smartgrid/referenceshelf/whitepapers/09.02.2010_Antic Equivalent URI: cleanenergysolutions.org/content/anticipates-and-responds-system-distu Language: English Policies: "Deployment Programs,Financial Incentives,Regulations" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Public-Private Partnerships Regulations: "Cost Recovery/Allocation,Resource Integration Planning" is not in the list of possible values (Agriculture Efficiency Requirements, Appliance & Equipment Standards and Required Labeling, Audit Requirements, Building Certification, Building Codes, Cost Recovery/Allocation, Emissions Mitigation Scheme, Emissions Standards, Enabling Legislation, Energy Standards, Feebates, Feed-in Tariffs, Fuel Efficiency Standards, Incandescent Phase-Out, Mandates/Targets, Net Metering & Interconnection, Resource Integration Planning, Safety Standards, Upgrade Requirements, Utility/Electricity Service Costs) for this property.

358

How Do Investors Respond to Green Company Awards in China?1  

E-Print Network (OSTI)

quality, China has begun taking measures to increase environmental fees, to increase reliance on renewable1 How Do Investors Respond to Green Company Awards in China?1 September, 2011 Thomas Lyon, Yao Lu, Xinzheng Shi, Qie Yin Abstract We find that firms winning Green Company Awards in China from 2008 to 2011

Lyon, Thomas P.

359

Formal Verification of Safety Automation Logic Designs  

E-Print Network (OSTI)

In safety critical processes, especially in nuclear power plants, the new digitalized automation (I&C) systems have brought out new needs for safety evaluation. The programmable digital logic controllers can perform complicated control tasks and, thus, their comprehensive verification against safety requirements is a difficult task. Model checking is a promising approach that enables complete verification of a logic design when a finite state machine model of the control logic is available. The paper describes the use of model checking for the verification of an arc protection system and summarizes experiences of utilizing model checking in automation design and verification. For the verification of the arc protection system, it was necessary to model the overall design of the system and its operation environment. The environment model could be kept relatively simple while covering the essential behaviour of the environment. The results show that it is possible to reliably verify the presence of a desired or the absence of an undesired behaviour of the system. The possibility of complete verification makes model checking different from simulation based testing where only selected schemes can be simulated and one can never be sure that all the possible sequences are examined.

Janne Valkonen; Matti Koskimies; Kim Bjrkman; Keijo Heljanko; Ilkka Niemel; Jari J. Hmlinen

2009-01-01T23:59:59.000Z

360

UV LED lighting for automated crystal centring  

E-Print Network (OSTI)

A direct outcome of the exponential growth of macromolecular crystallography is the continuously increasing demand for synchrotron beam time, both from academic and industrial users. As more and more projects entail screening a profusion of sample crystals, fully automated procedures at every level of the experiments are being implemented at all synchrotron facilities. One of the major obstacles to achieving such automation lies in the sample recognition and centring in the X-ray beam. The capacity of UV light to specifically react with aromatic residues present in proteins or with DNA base pairs is at the basis of UV-assisted crystal centring. Although very efficient, a well known side effect of illuminating biological samples with strong UV sources is the damage induced on the irradiated samples. In the present study the effectiveness of a softer UV light for crystal centring by taking advantage of low-power light-emitting diode (LED) sources has been investigated. The use of UV LEDs represents a lowcost solution for crystal centring with high specificity.

Leonard M. G. Chavas; Yusuke Yamada; Masahiko Hiraki; Noriyuki Igarashi; Naohiro Matsugaki; Soichi Wakatsuki

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Automation of the LANL ARIES lathe glovebox  

SciTech Connect

This paper presents the design of an automation system required for material handling within a glovebox. The Advanced Recovery and Integration Extraction System (ARIES) located at the Los Alamos National Laboratory (LANL) enables workers to dismantle nuclear weapons, separating the plutonium from other weapon components. The ARIES line consists of several gloveboxes that allow the 'pit' or trigger of a nuclear weapon to be dismantled and the plutonium stored in a safe form. The Lathe glovebox is the first step in the ARIES line and is used to cut the pit open to be dismantled. There are several methods for doing this, however there are advantages to using the lathe over other methods for this process. In general, this system will give the ARIES line the capability to handle a wider range of pit types. The system consists of a lathe, a 4 Degree of Freedom (DOF) robot, a glovebox that houses them, and a universal controller that resides outside the glovebox and controls all equipment. This paper will present the design and possible implementation of this lathe automation system. It will cover the system requirements, the mechanical hardware used within the glovebox, the control system and software, and operation procedures for various tasks.

Pittman, P. C. (Pete C.); Staab, T. A. (Torsten); Nelson, D. C. (David C.); Santistevan, W. W. (William W.); Brown, W. G. (Wendel G.)

2001-01-01T23:59:59.000Z

362

Application Guide for the Automation of Distribution Feeder Capacitors  

Science Conference Proceedings (OSTI)

This fourth and final report in EPRI's capacitor reliability study deals with automating distribution capacitors. Prior reports dealt with nuisance fuse operations, operating and construction practices, and lighting protection and grounding of capacitor controllers. This guide is concerned with applying automated switched capacitors to distribution systems. Consideration is given to applications involving locally controlled capacitor banks and to systems utilizing centrally controlled, switched capacitor...

2005-12-13T23:59:59.000Z

363

Automated Phase Design and Timing Adjustment for Signal Phase Design  

Science Conference Proceedings (OSTI)

In this paper we describe the design processes of human traffic engineers and the development of an automated system that solves the problem of timing adjustment in signal phase sequence design. i>Signal phase sequencing refers to the sequence of ... Keywords: automated design, case-based reasoning, signal phase design, traffic management

L. Wang; C. C. Hayes; R. R. Penner

2001-06-01T23:59:59.000Z

364

Automated gas transfer systems for low pressure operations  

Science Conference Proceedings (OSTI)

The introduction of new components and the modification of commercially available hardware have been instrumental in the automation of low pressure gas transfer systems. The benefits from the automation have been faster sample operation, increased precision and a safer environment for the operator.

Baker, R.W.; Hoseus, N.L.

1988-01-22T23:59:59.000Z

365

Exploring user's perception toward automated checkout trolley in developing countries  

Science Conference Proceedings (OSTI)

Retailers nowadays have relied on technology-based self-service options such as the self-checkout system to provide better customer value through pleasant shopping experience. Recently, automated checkout shopping trolley technologies have taken a further ... Keywords: automated checkout, technology management, technology-based self-service (TBSS)

Koh Peik See; Tan Shiang-Yen; Nasuha Lee Abdullah; Rosnah Idrus

2011-04-01T23:59:59.000Z

366

An automated translator for model checking time constrained workflow systems  

Science Conference Proceedings (OSTI)

Workflows have proven to be a useful conceptualization for the automation of business processes. While formal verification methods (e.g., model checking) can help ensure the reliability of workflow systems, the industrial uptake of such methods has been ... Keywords: automated translation, distributed model checking, modeling, time, workflow systems

Ahmed Shah Mashiyat; Fazle Rabbi; Hao Wang; Wendy MacCaull

2010-09-01T23:59:59.000Z

367

Automated Configuration of Algorithms for Solving Hard Computational Problems  

E-Print Network (OSTI)

Automated Configuration of Algorithms for Solving Hard Computational Problems by Frank Hutter Dipl-performing algorithms for many hard problems are highly parameterized. Selecting the best heuristics and tuning studies the automation of this important part of algorithm design: the configuration of discrete algorithm

Hutter, Frank

368

Weight control in an automated design environment. [Of aircraft  

SciTech Connect

Results of a program to study weight control in an automated design environment are presented. Automation, computer applications, design coverage and special communication problems are discussed. Results of a tube weight analysis routine, a program of weight control incentives, and results of a special weight reduction program are given.

Staton, R.N.

1987-01-01T23:59:59.000Z

369

Prototypes for automated architectural 3D-layout  

Science Conference Proceedings (OSTI)

Prototypes for automated spatial layout in architecture focus on approaches, which define occupiable space as an orthogonal 2D-grid and use algorithms to allocate each rectangle of the grid to a particular function. However, these approaches are limiting ... Keywords: 3D-modeling and automated spatial layout, euclidean and non-euclidean geometries, satisfiability

Henriette Bier; Adriaan De Jong; Niels Brouwers; Marijn Heule; Hans Van Maaren / Gijs Van Der Hoorn

2007-09-01T23:59:59.000Z

370

Automated economic data processing in the changing business world  

Science Conference Proceedings (OSTI)

An attempt is made for exploring some strands of the automated economic data processing in the changing business world. The new realities in business management and automated economic data processing are outlined. Some strands for intellectual support ... Keywords: E-business, M-business, business intelligence, data processing, information technology, knowledge management

Ljuben Kraev

2003-06-01T23:59:59.000Z

371

Efficient and effective automated surveillance agents using kernel tricks  

Science Conference Proceedings (OSTI)

Many schemes have been presented over the years to develop automated visual surveillance systems. However, these schemes typically need custom equipment, or involve significant complexity and storage requirements. In this paper we present three software-based ... Keywords: agent, automated, camera, intrusion, kernel, surveillance

Tarem Ahmed, Xianglin Wei, Supriyo Ahmed, Al-Sakib Khan Pathan

2013-05-01T23:59:59.000Z

372

Traffic measurement and analysis of building automation and control networks  

Science Conference Proceedings (OSTI)

This paper proposes a framework for a flow-based network traffic monitoring of building automation and control networks. Current approaches to monitor special environment networks are limited to checking accessibility and a state of monitored devices. ... Keywords: BACnet, BACnetflow, analysis, automation, building, control, measurement, network

Radek Krej?; Pavel ?eleda; Jakub Dobrovoln

2012-06-01T23:59:59.000Z

373

Towards automated design of MAC protocols for underwater wireless networks  

Science Conference Proceedings (OSTI)

We present a framework for the automated design of MAC protocols for underwater acoustic wireless networks. We formulate a protocol optimization problem in which the exchange of control packets is explicitly modeled. A protocol optimization program generates ... Keywords: automation, mac, network, wireless underwater protocol

Volkan Rodoplu; Amir Aminzadeh Gohari; Wei Tang

2008-09-01T23:59:59.000Z

374

The CADE-23 Automated Theorem Proving System Competition - CASC-23  

Science Conference Proceedings (OSTI)

The CADE ATP System Competition (CASC) is an annual evaluation of fully automatic, classical logic Automated Theorem Proving (ATP) systems. CASC-23 was the sixteenth competition in the CASC series. Thirty-six ATP systems and system variants competed ... Keywords: Automated theorem proving, competition

Geoff Sutcliffe

2012-01-01T23:59:59.000Z

375

An application of automated reasoning in natural language question answering  

Science Conference Proceedings (OSTI)

The LogAnswer system is an application of automated reasoning to the field of open domain question answering. In order to find answers to natural language questions regarding arbitrary topics, the system integrates an automated theorem prover in a framework ... Keywords: Question answering, theorem prover

Ulrich Furbach; Ingo Glckner; Bjrn Pelzer

2010-04-01T23:59:59.000Z

376

The CADE-21 automated theorem proving system competition  

Science Conference Proceedings (OSTI)

The CADE ATP system competition (CASC) is an annual evaluation of fully automatic, first order Automated Theorem Proving (ATP) systems. CASC-21 was the twelfth competition in the CASC series. Twenty ATP systems and system variants competed in the various ... Keywords: Competition, automated theorem proving

Geoff Sutcliffe

2008-01-01T23:59:59.000Z

377

Design automation of cellular neural networks for data fusion applications  

Science Conference Proceedings (OSTI)

In this study, a novel methodology for the design automation of cellular neural networks (CNNs) for different applications is proposed. In particular, an evolvable algorithm has been developed providing the ability to generate the netlist of the requested ... Keywords: Cellular neural networks, Data fusion, Design automation, Sensor network

Prodromos Chatziagorakis; Georgios Ch. Sirakoulis; John N. Lygouras

2012-02-01T23:59:59.000Z

378

Opportunities for Energy Efficiency and Automated Demand Response in Industrial Refrigerated Warehouses in California  

E-Print Network (OSTI)

your Power. (2008). "Demand Response Programs." RetrievedS. (2008). Automated Demand Response Results from Multi-Yearusing Open Automated Demand Response, California Energy

Lekov, Alex

2009-01-01T23:59:59.000Z

379

Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings  

E-Print Network (OSTI)

below. Fig. 4 Automated demand response general features Thearchitecture Automated Demand Response System ArchitectureCould Bene?t for Demand Response Programs, But Challenges

Piette, Mary Ann

2010-01-01T23:59:59.000Z

380

Demand Response and Open Automated Demand Response Opportunities for Data Centers  

E-Print Network (OSTI)

Standardized Automated Demand Response Signals. Presented atand Automated Demand Response in Industrial RefrigeratedActions for Industrial Demand Response in California. LBNL-

Mares, K.C.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Findings from Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings  

E-Print Network (OSTI)

Open Automated Demand Response Demonstration Project LBNL-2009a). Open Automated Demand Response Communications inand Actions for Industrial Demand Response in California.

Kiliccote, Sila

2010-01-01T23:59:59.000Z

382

Design and Implementation of an Open, Interoperable Automated Demand Response Infrastructure  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large Facilities. CEC-Fully Automated Demand Response Tests in Large Facilities.Management and Demand Response in Commercial Building. ,

Piette, Mary Ann; Kiliccote, Sila; Ghatikar, Girish

2008-01-01T23:59:59.000Z

383

ISA Approves Standard for Wireless Automation in Process Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications September 22, 2009 - 1:28pm Addthis September 22, 2009 On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. The standard is intended to provide secure, reliable wireless operation for monitoring, alerting, and control applications. It enables robustness with non-ISA-compliant legacy wireless systems, coexistence and interoperability with other wireless devices, and robustness in harsh industrial

384

Reference Model for Control and Automation Systems in Electrical Power |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Model for Control and Automation Systems in Electrical Model for Control and Automation Systems in Electrical Power Reference Model for Control and Automation Systems in Electrical Power Modern infrastructure automation systems are threatened by cyber attack. Their higher visibility in recent years and the increasing use of modern information technology (IT) components contribute to increased security risk. A means of analyzing these infrastructure automation systems is needed to help understand and study the many system relationships that affect the overall security of the system. Modeling these systems is a very cost effective means of addressing the problem of security from an overall system view. The model presented in the document below provides a structured, cost effective approach to address technical security in process control systems

385

A sensor-based automation system for handling nuclear materials  

Science Conference Proceedings (OSTI)

An automated system is being developed for handling large payloads of radioactive nuclear materials in an analytical laboratory. The automation system performs unpacking and repacking of payloads from shipping and storage containers, and delivery of the payloads to the stations in the laboratory. The system uses machine vision and force/torque sensing to provide sensor-based control of the automation system in order to enhance system safety, flexibility, and robustness, and achieve easy remote operation. The automation system also controls the operation of the laboratory measurement systems and the coordination of them with the robotic system. Particular attention has been given to system design features and analytical methods that provide an enhanced level of operational safety. Independent mechanical gripper interlock and tool release mechanisms were designed to prevent payload mishandling. An extensive Failure Modes and Effects Analysis of the automation system was developed as a safety design analysis tool.

Drotning, W.; Kimberly, H.; Wapman, W.; Darras, D. [and others

1997-03-01T23:59:59.000Z

386

DOE Joint Genome Institute: Waves of Berkeley Lab Responders Deploy Omics  

NLE Websites -- All DOE Office Websites (Extended Search)

1, 2012 1, 2012 Waves of Berkeley Lab Responders Deploy Omics to Track Deepwater Horizon Oil Spill Cleanup Microbes In the aftermath of the Deepwater Horizon oil spill in the Gulf of Mexico two years ago, various strategies were deployed to prevent 4.9 million barrels of light crude oil from fouling the waters and reaching the shores. A team of Lawrence Berkeley National Laboratory (Berkeley Lab) researchers found that nature also played a role in the dispersal process as marine microbial communities responded to the oil plume that made its way from the wellhead at a depth of 5,000 feet to the surface of the water. "There was oil on the surface and oil below, but no oil in between," said microbial ecologist Terry Hazen, former head of the Ecology Department

387

Automated Spot Weld Inspection using Infrared Thermography  

Science Conference Proceedings (OSTI)

An automated non-contact and non-destructive resistance spot weld inspection system based on infrared (IR) thermography was developed for post-weld applications. During inspection, a weld coupon was heated up by an auxiliary induction heating device from one side of the weld, while the resulting thermal waves on the other side were observed by an IR camera. The IR images were analyzed to extract a thermal signature based on normalized heating time, which was then quantitatively correlated to the spot weld nugget size. The use of normalized instead of absolute IR intensity was found to be useful in minimizing the sensitivity to the unknown surface conditions and environment interference. Application of the IR-based inspection system to different advanced high strength steels, thickness gauges and coatings were discussed.

Chen, Jian [ORNL; Zhang, Wei [ORNL; Yu, Zhenzhen [ORNL; Feng, Zhili [ORNL

2012-01-01T23:59:59.000Z

388

Automated startup of the MIT research reactor  

SciTech Connect

This summary describes the development, implementation, and testing of a generic method for performing automated startups of nuclear reactors described by space-independent kinetics under conditions of closed-loop digital control. The technique entails first obtaining a reliable estimate of the reactor's initial degree of subcriticality and then substituting that estimate into a model-based control law so as to permit a power increase from subcritical on a demanded trajectory. The estimation of subcriticality is accomplished by application of the perturbed reactivity method. The shutdown reactor is perturbed by the insertion of reactivity at a known rate. Observation of the resulting period permits determination of the initial degree of subcriticality. A major advantage to this method is that repeated estimates are obtained of the same quantity. Hence, statistical methods can be applied to improve the quality of the calculation.

Kwok, K.S. (Massachusetts Inst. of Tech., Cambridge (United States))

1992-01-01T23:59:59.000Z

389

An automated neutron monitor maintenance system  

Science Conference Proceedings (OSTI)

Neutron detectors are commonly used by the nuclear materials processing industry to monitor fissile materials in process vessels and tanks. The proper functioning of these neutron monitors must be periodically evaluated. We have developed and placed in routine use a PC-based multichannel analyzer (MCA) system for on-line BF3 and He-3 gas-filled detector function testing. The automated system: 1) acquires spectral data from the monitor system, 2) analyzes the spectrum to determine the detector`s functionality, 3) makes suggestions for maintenance or repair, as required, and 4) saves the spectrum and results to disk for review. The operator interface has been designed to be user-friendly and to minimize the training requirements of the user. The system may also be easily customized for various applications

Moore, F.S.; Griffin, J.C.; Odell, D.M.C.

1996-09-01T23:59:59.000Z

390

Automated User Modeling for Personalized Digital Libraries  

E-Print Network (OSTI)

Digital libraries (DL) have become one of the most typical ways of accessing any kind of digitalized information. Due to this key role, users welcome any improvements on the services they receive from digital libraries. One trend used to improve digital services is through personalization. Up to now, the most common approach for personalization in digital libraries has been user-driven. Nevertheless, the design of efficient personalized services has to be done, at least in part, in an automatic way. In this context, machine learning techniques automate the process of constructing user models. This paper proposes a new approach to construct digital libraries that satisfy users necessity for information: Adaptive Digital Libraries, libraries that automatically learn user preferences and goals and personalize their interaction using this information.

E. Frias-martinez; G. Magoulas; S. Chen; R. Macredie

2006-01-01T23:59:59.000Z

391

Honeywell modular automation system computer software documentation  

SciTech Connect

The purpose of this Computer Software Document (CSWD) is to provide configuration control of the Honeywell Modular Automation System (MAS) in use at the Plutonium Finishing Plant (PFP). The Honeywell MAS is used to control the thermal stabilization furnaces in glovebox HA-211. The PFP developed software is being updated to reflect the Polycube Processing and Unwashed Salt Thermal Stabilization program addition. The polycube processing program was installed per HNF-FMP-02-11162-R2. The functional test of the program was performed in JCS work package 22-02-1031, The unwashed salt item program was installed per HNF-FMP-03-16577-RO. The functional test of the program completed in JCS work package 22-03-00654.

STUBBS, A.M.

2003-07-02T23:59:59.000Z

392

Manz Automation AG | Open Energy Information  

Open Energy Info (EERE)

AG AG Jump to: navigation, search Name Manz Automation AG Place Reutlingen, Baden-Württemberg, Germany Zip D-72768 Sector Solar Product German manufacturer of solar and LCD capital equipment. Coordinates 48.49159°, 9.21487° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.49159,"lon":9.21487,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

393

Automated Fuel Element Closure Welding System  

SciTech Connect

The Automated Fuel Element Closure Welding System is a robotic device that will load and weld top end plugs onto nuclear fuel elements in a highly radioactive and inert gas environment. The system was developed at Argonne National Laboratory-West as part of the Fuel Cycle Demonstration. The welding system performs four main functions, it (1) injects a small amount of a xenon/krypton gas mixture into specific fuel elements, and (2) loads tiny end plugs into the tops of fuel element jackets, and (3) welds the end plugs to the element jackets, and (4) performs a dimensional inspection of the pre- and post-welded fuel elements. The system components are modular to facilitate remote replacement of failed parts. The entire system can be operated remotely in manual, semi-automatic, or fully automatic modes using a computer control system. The welding system is currently undergoing software testing and functional checkout.

Wahlquist, D.R.

1993-01-01T23:59:59.000Z

394

Automated Fuel Element Closure Welding System  

SciTech Connect

The Automated Fuel Element Closure Welding System is a robotic device that will load and weld top end plugs onto nuclear fuel elements in a highly radioactive and inert gas environment. The system was developed at Argonne National Laboratory-West as part of the Fuel Cycle Demonstration. The welding system performs four main functions, it (1) injects a small amount of a xenon/krypton gas mixture into specific fuel elements, and (2) loads tiny end plugs into the tops of fuel element jackets, and (3) welds the end plugs to the element jackets, and (4) performs a dimensional inspection of the pre- and post-welded fuel elements. The system components are modular to facilitate remote replacement of failed parts. The entire system can be operated remotely in manual, semi-automatic, or fully automatic modes using a computer control system. The welding system is currently undergoing software testing and functional checkout.

Wahlquist, D.R.

1993-03-01T23:59:59.000Z

395

Design and Operation of an Open, Interoperable Automated Demand Response  

NLE Websites -- All DOE Office Websites (Extended Search)

Design and Operation of an Open, Interoperable Automated Demand Response Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings Title Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings Publication Type Journal Article LBNL Report Number LBNL-2340e Year of Publication 2009 Authors Piette, Mary Ann, Girish Ghatikar, Sila Kiliccote, David S. Watson, Edward Koch, and Dan Hennage Journal Journal of Computing Science and Information Engineering Volume 9 Issue 2 Keywords communication and standards, market sectors, openadr Abstract This paper describes the concept for and lessons from the development and field-testing of an open, interoperable communications infrastructure to support automated demand response (auto-DR). Automating DR allows greater levels of participation, improved reliability, and repeatability of the DR in participating facilities. This paper also presents the technical and architectural issues associated with auto-DR and description of the demand response automation server (DRAS), the client/server architecture-based middle-ware used to automate the interactions between the utilities or any DR serving entity and their customers for DR programs. Use case diagrams are presented to show the role of the DRAS between utility/ISO and the clients at the facilities.

396

Microsoft Word - Wireless Automation World for OE FINAL.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automation World Features New White Paper on Wireless Security, Interviews Authors Automation World Features New White Paper on Wireless Security, Interviews Authors April 16, 2009 The April 2009 issue of Automation World magazine features the white paper Wireless Systems Considerations When Implementing NERC Critical Infrastructure Protection Standards. The paper addresses wireless protection issues arising from requirements of the Critical Infrastructure Protection (CIP) Standards for the electricity sector, developed by the North American Electric Reliability Corporation (NERC). The CIP standards require entities to monitor and control all electronic access to a company's electronic security perimeter, but this requirement becomes difficult to implement when it

397

Distribution automation. (Latest citations from the INSPEC database). Published Search  

SciTech Connect

The bibliography contains citations concerning distribution automation for the electric power utility industry. Distribution automation comprises a combination of real-time load monitoring; detailed modeling of the distribution, generation, transmission, and customer systems; and remote control of devices. Distribution automation achieves energy conservation by reduction of consumption, lower losses in distribution and transmission mission circuits, and reduction of peak load. Topics covered include demand-side management, telecontrol, distribution networks, communications software, and cost-benefit analyses. (Contains a minimum of 93 citations and includes a subject term index and title list.)

Not Available

1994-12-01T23:59:59.000Z

398

To Wave Or Not To Wave? Order Release Policies for Warehouses with an Automated Sorter  

E-Print Network (OSTI)

Wave-based release policies are prevalent in warehouses with an automated sorter, and take different

Gallien, Jrmie

2008-09-08T23:59:59.000Z

399

New Technology Demonstration Program - Results of an Attempted Field Test of Full-Spectrum Polarized Lighting in a Mail Processing/Office Space  

SciTech Connect

An assessment of the potential energy savings associated with the use of full-spectrum polarized lighting in a work space was initiated as part of the Department of Energy's (DOE) Federal Energy Management Program (FEMP) New Technology Demonstration Program (NTDP) in 1997. This project was intended to provide information on the effectiveness and application of this technology that could help federal energy managers and other interested individuals determine whether this technology had benefits for their occupied spaces. The use of an actual mail processing/office work area provided the capability of evaluating the technologies effectiveness in the real world.

Richman, Eric E.

2001-06-14T23:59:59.000Z

400

New Technology Demonstration Program - Results of an Attempted Field Test of Full-Spectrum Polarized Lighting in a Mail Processing/Office Space  

SciTech Connect

An assessment of the potential energy savings associated with the use of full-spectrum polarized lighting in a work space was initiated as part of the Department of Energy's (DOE) Federal Energy Management Program (FEMP) New Technology Demonstration Program (NTDP) in 1997. This project was intended to provide information on the effectiveness and application of this technology that could help federal energy managers and other interested individuals determine whether this technology had benefits for their occupied spaces. The use of an actual mail processing/office work area provided the capability of evaluating the technologies effectiveness in the real world.

Richman, Eric E.

2001-06-14T23:59:59.000Z

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

V-205: IBM Tivoli System Automation for Multiplatforms Java V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013 - 4:20am Addthis PROBLEM: IBM has acknowledged a weakness and multiple vulnerabilities in IBM Tivoli System Automation for Multiplatforms, which can be exploited by malicious, local users to disclose certain sensitive information and gain escalated privileges and by malicious people to disclose certain sensitive information, manipulate certain data, bypass certain security restrictions, cause a DoS (Denial of Service), and compromise a vulnerable system. PLATFORM: The weakness and the vulnerabilities are reported in versions 3.1 through 3.2.2 running on AIX, Linux, Solaris, and Windows.

402

Radioanalytical Chemistry for Automated Nuclear Waste Process Monitoring  

Science Conference Proceedings (OSTI)

The objectives of our research were to develop the first automated radiochemical process analyzer including sample pretreatment methodoology, and to initiate work on new detection approaches, especially using modified diode detectors.

Jay W. Grate; Timothy A. DeVol

2006-07-20T23:59:59.000Z

403

Industrial SPP/Partner Teaming Profile - Rockwell Automation  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation Rockwell Automation 6400 West Enterprise Drive Mequon, WI 53092 Business: Control Products & Solutions Joshua J. Olive Sr. Product Specialist Phone: 262-512-2095 Email: jjolive@ra.rockwell.com Industrial Partner General Mills 9000 Plymouth Ave. North Minneapolis, MN 55427 Business: Food Processing David Spryshak Facilities, Control, & IS Engineer Phone: 763-764-7091 Email: Dave.spryshak@genmills.com Rockwell Automation helps General Mills save $2.6 million annually through a standardized energy management system for air handling units Project Scope Rockwell Automation partnered with General Mills to develop a standardized energy management system (EMS) for controlling air handling units (AHU) and has installed the system at 14 General Mills

404

Definition: Automated Feeder And Line Switching | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Automated Feeder And Line Switching Jump to: navigation, search Dictionary.png Automated Feeder And Line Switching Automated feeder and line switching is realized through automatic isolation and reconfiguration of faulted segments of distribution feeders or transmission lines via sensors, controls, switches, and communications systems. These devices can operate autonomously in response to local events or in response to signals from a central control system.[1] Related Terms transmission lines, transmission line References ↑ SmartGrid.gov 'Description of Functions' An i LikeLike UnlikeLike You like this.Sign Up to see what your friends like. nline Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Automated_Feeder_And_Line_Switching&oldid=480562"

405

Price Server System for Automated Critical Peak Pricing  

NLE Websites -- All DOE Office Websites (Extended Search)

Price Server System for Automated Critical Peak Pricing Price Server System for Automated Critical Peak Pricing Speaker(s): David S. Watson Date: June 3, 2005 - 12:00pm Location: 90-3148 Overview of current California Energy Commission (CEC)/Demand Response Research Center (DRRC) Auto-CPP project: This summer, some select commercial CPP customers of PG&E will have the option of joining the Automated Critical Peak Pricing pilot. The pilot will have the same tariffs as standard CPP programs, but will include an added feature: automated shedding of electric loads. Through use of the Price Server System, day-ahead CPP event signals initiated by PG&E will ultimately cause electric loads to be automatically curtailed on commercial customer sites. These optional predetermined shed strategies will occur without

406

New Services for Building Maintenance Enabled by Building Automation  

NLE Websites -- All DOE Office Websites (Extended Search)

New Services for Building Maintenance Enabled by Building Automation New Services for Building Maintenance Enabled by Building Automation Systems Speaker(s): Heikki Ihasalo Date: May 17, 2007 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Peng Xu Today's building automation systems enable building systems integration and access to information from a variety of sources, e.g. fire alarm systems, access control, security systems, lighting and control systems. With the help of Internet technology and XML (Extensible Markup Language) building automation systems can also connect to other enterprise\ applications such as facility management software, maintenance management systems, ERP or financial systems. New applications are also emerging to manage energy consumption in buildings, for example demand response and fault detection

407

Global health response more accurate with automated influenza surveillance  

NLE Websites -- All DOE Office Websites (Extended Search)

Global health response more accurate with automated influenza Global health response more accurate with automated influenza surveillance Global health response more accurate with automated influenza surveillance Public health officials will be able to determine whether an outbreak of an infectious disease comes from a pandemic strain or one less virulent. January 31, 2011 Lance Green of LANL tests an earlier version of a modular laboratory like the ones that will be part of the High-Throughput Laboratory Network Lance Green of LANL tests an earlier version of a modular laboratory like the ones that will be part of the High-Throughput Laboratory Network-a series of compact, self-contained, automated systems for surveillance and screening of potential pandemic strains of influenza and other deadly infectious diseases.

408

Monitoring Free-Water Evaporation at Automated Weather Stations  

Science Conference Proceedings (OSTI)

The automation of weather stations necessitates an alternative approach to the traditional manual measure of free-water evaporation made using a class A pan. This study compared commercially available water-level sensing transducers mounted on ...

S. M. McGinn; H. D. J. McLean

1995-12-01T23:59:59.000Z

409

Comprehensive Automated Quality Assurance of Daily Surface Observations  

Science Conference Proceedings (OSTI)

This paper describes a comprehensive set of fully automated quality assurance (QA) procedures for observations of daily surface temperature, precipitation, snowfall, and snow depth. The QA procedures are being applied operationally to the Global ...

Imke Durre; Matthew J. Menne; Byron E. Gleason; Tamara G. Houston; Russell S. Vose

2010-08-01T23:59:59.000Z

410

A simulation tool for automated platooning in mixed highway scenarios  

Science Conference Proceedings (OSTI)

Automated platooning is one of the most challenging fields in the domain of Intelligent Transportation Systems (ITS). Conceptually, platooning means creating clusters of vehicles which closely follow each other autonomously without action of the driver, ...

Michele Segata; Falko Dressler; Renato Lo Cigno; Mario Gerla

2013-02-01T23:59:59.000Z

411

Summary of the 2006 Automated Demand Response Pilot  

E-Print Network (OSTI)

This paper discusses the specific concept for, design of, and results from a pilot program to automate demand response with critical peak pricing. California utilities have been exploring the use of critical peak pricing (CPP) to help reduce peak day summer time electric loads. CPP is a form of price-responsive demand response. This Automated Critical Peak Pricing (Auto-CPP) project from 2006 draws upon three years of previous research and demonstrations from the years of 2003, 2004, and 2005. The purpose of automated demand response (DR) is to improve the responsiveness and participation of electricity customers in DR programs and lower overall costs to achieve DR. Auto-CPP is a form of automated demand response (Auto-DR).

Piette, M.; Kiliccote, S.

2007-01-01T23:59:59.000Z

412

Automated electricity demand response - Tech Close-Up  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated electricity demand response - Tech Close-Up Click here to view this video Date: August 27, 2013 Presenter(s): Many, including EETD's Mary Ann Piette. A Tech Close-Up news...

413

Automated Video Analysis of Animal Movements Using Gabor Orientation Filters  

E-Print Network (OSTI)

a Single frame from a video clip, after de-interlacing.median of all frames in the video sequence. c The output of010-9062-1 Automated Video Analysis of Animal Movements

Wagenaar, Daniel A.; Kristan, Wiliam B.

2010-01-01T23:59:59.000Z

414

Development of an Automated Classification Procedure for Rainfall Systems  

Science Conference Proceedings (OSTI)

An automated procedure for classifying rainfall systems (meso-? scale and larger) was developed using an operational analysis of hourly precipitation estimates from radar and rain gauge data. The development process followed two main phases: a ...

Michael E. Baldwin; John S. Kain; S. Lakshmivarahan

2005-04-01T23:59:59.000Z

415

Decisions in the perspective automated artillery fire support  

Science Conference Proceedings (OSTI)

This paper is focused on decisions in the future Automated Artillery Fire Support Control System. Artillery units of the Army of the Czech Republic, reflecting current global security neighborhood, can be used outside the Czech Republic. The paper presents ...

M. Blaha; L. Potuk

2011-10-01T23:59:59.000Z

416

Operational Automated Graphics at the National Climatic Data Center  

Science Conference Proceedings (OSTI)

In January 1987 the National Climatic Data Center introduced automated graphics into its Climatological Data publications. The publications, which are produced for each state and distributed to thousands of subscribers monthly, have, in the past, ...

Michael Crowe; Thomas Reek; Robert Mattingly

1988-01-01T23:59:59.000Z

417

Toward Automated Interpretation of Satellite Imagery for Navy Shipboard Applications  

Science Conference Proceedings (OSTI)

The U.S. Navy has plans to develop an automated system to analyze satellite imagery aboard its ships at sea. Lack of time for training, in combination with frequent personnel rotations, precludes the building of extensive imagery interpretation ...

James E. Peak; Paul M. Tag

1992-07-01T23:59:59.000Z

418

Intelligent and collaborative embedded computing in automation engineering  

Science Conference Proceedings (OSTI)

This paper presents an overview of the the novel technologies that we are experiencing today in the automation industries. We present the opportunities and challenges of having tightly coupled collaborative networks of embedded systems for controlling ...

Mohammad Abdullah Al Faruque; Arquimedes Canedo

2012-03-01T23:59:59.000Z

419

Assessing the performance of human-automation collaborative planning systems  

E-Print Network (OSTI)

Planning and Resource Allocation (P/RA) Human Supervisory Control (HSC) systems utilize the capabilities of both human operators and automated planning algorithms to schedule tasks for complex systems. In these systems, ...

Ryan, Jason C. (Jason Christopher)

2011-01-01T23:59:59.000Z

420

Face occlusion detection for automated teller machine surveillance  

Science Conference Proceedings (OSTI)

Real time automatic alarm systems play an essential role in security management, as evidenced by the surveillance cameras installed in nearly all automated teller machines (ATMs). Whereas manual video surveillance requires constant staff monitoring, ...

Daw-Tung Lin; Ming-Ju Liu

2006-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Human-automation collaborative RRT for UAV mission path planning  

E-Print Network (OSTI)

Future envisioned Unmanned Aerial Vehicle (UAV) missions will be carried out in dynamic and complex environments. Human-automation collaboration will be required in order to distribute the increased mission workload that ...

Caves, Amrico De Jess (Caves Corral)

2010-01-01T23:59:59.000Z

422

Wireless home automation networks: a survey of architectures and technologies  

Science Conference Proceedings (OSTI)

Wireless home automation networks comprise wireless embedded sensors and actuators that enable monitoring and control applications for home user comfort and efficient home management. This article surveys the main current and emerging solutions that ...

Carles Gomez; Josep Paradells

2010-06-01T23:59:59.000Z

423

V-132: IBM Tivoli System Automation Application Manager Multiple...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which...

424

Automated generation of kinetic chemical mechanisms using rewriting  

Science Conference Proceedings (OSTI)

Several software systems have been developed recently for the automated generation of combustion reactions kinetic mechanisms using different representations of species and reactions and different generation algorithms. In parallel, several software ...

Olivier Bournez; Guy-Marie Cme; Valrie Conraud; Hlne Kirchner; Liliana Ib?nescu

2003-06-01T23:59:59.000Z

425

An Automated Radar Technique for the Identification of Tropical Precipitation  

Science Conference Proceedings (OSTI)

A radar-based automated technique for the identification of tropical precipitation was developed to improve quantitative precipitation estimation during extreme rainfall events. The technique uses vertical profiles of reflectivity to identify the ...

Xiaoyong Xu; Kenneth Howard; Jian Zhang

2008-10-01T23:59:59.000Z

426

Exploiting home automation protocols for load monitoring in smart buildings  

Science Conference Proceedings (OSTI)

Monitoring and controlling electrical loads is crucial for demand-side energy management in smart grids. Home automation (HA) protocols, such as X10 and Insteon, have provided programmatic load control for many years, and are being widely deployed in ...

David Irwin; Sean Barker; Aditya Mishra; Prashant Shenoy; Anthony Wu; Jeannie Albrecht

2011-11-01T23:59:59.000Z

427

Automated reaction mechanism generation : improving accuracy and broadening scope  

E-Print Network (OSTI)

Chemical kinetic modeling plays an important role in the study of reactive chemical systems. Thus, an automated means of constructing chemical kinetic models forms a useful tool in the engineering and science surrounding ...

Magoon, Gregory Russell

2012-01-01T23:59:59.000Z

428

State-of-the-art automated process simulation systems  

Science Conference Proceedings (OSTI)

The control and engineering tasks accomplished with the help of automated process simulation systems are described. The practical solution examples are cited. The UniSim Design system, providing modeling of all stages of production cycle, is described.

V. M. Dozortsev; E. Yu. Kreidlin

2010-09-01T23:59:59.000Z

429

Proceedings of the 45th annual Design Automation Conference  

Science Conference Proceedings (OSTI)

Welcome to the 45th Design Automation Conference and the City of Anaheim! DAC is the premier event for the electronic design community. It offers the industry's most prestigious technical conference in combination with the biggest exhibition. DAC is ...

Limor Fix

2008-06-01T23:59:59.000Z

430

Modelling and automated composition of user-centric services  

Science Conference Proceedings (OSTI)

User-centric services bring additional constraints to the problem of automated service composition. While in business-centric settings the services are orchestrated in order to accomplish a specific business task, user-centric service composition should ...

Raman Kazhamiakin; Massimo Paolucci; Marco Pistore; Heorhi Raik

2010-10-01T23:59:59.000Z

431

ISA Approves Standard for Wireless Automation in Process Control Applications  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications September 22, 2009 On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. The standard is intended to provide secure, reliable wireless operation for monitoring, alerting, and control applications. It enables robustness with non-ISA-compliant legacy wireless systems, coexistence and interoperability with other wireless devices, and robustness in harsh industrial environments. To meet the needs of industrial wireless users and operators of low-energy fixed, portable, and moving

432

Java Automation Controller and Real-Time Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Java Automation Controller and Real-Time Systems Java Automation Controller and Real-Time Systems Speaker(s): Greg Bollella Date: June 29, 2009 - 12:00pm Location: 90-3122 Java has always been a disruptive technology and now it is breaking the mold in industrial, process, building, and transportation automation systems. For many years, programmable logic controllers (PLCs), the digital versions of old relay-based control systems (such as that used in the NYC Subway system in the late 1800s) have primarily controlled these systems. PLCs are the workhorses of the controls industry but the market is characterized by proprietary, closed, expensive, special-purpose solutions. A Java-based automation controller breaks the mold by allowing control algorithms, which require strict real-time capabilities, to run on

433

Automated construction technologies : analyses and future development strategies  

E-Print Network (OSTI)

Substandard productivity and the lack of skilled workers in the construction industry have led major corporations all over the world aiming to produce various types of automated construction technologies. During the process, ...

Hoang, Han (Han Mai)

2005-01-01T23:59:59.000Z

434

Proceedings of the 42nd annual Design Automation Conference  

Science Conference Proceedings (OSTI)

Welcome to the 42nd Design Automation Conference and the city of Anaheim! More than ever, DAC is the place where researchers and developers, industry and academia, exhibitors and their customers come to learn about the latest breakthroughs, the latest ...

William H. Joyner, Jr.; Grant E. Martin; Andrew B. Kahng

2005-06-01T23:59:59.000Z

435

Technical and System Requirements for Advanced Distribution Automation  

Science Conference Proceedings (OSTI)

Traditional distribution systems were designed to perform one function: distribute electrical energy to end-users. Advanced Distribution Automation (ADA) is a concept for a fully controllable and flexible distribution system that will facilitate the exchange of both electrical energy and information between participants and system components. This report presents background information on distribution automation technologies and develops a roadmap to achieve the ADA systems required for future power deli...

2004-06-09T23:59:59.000Z

436

Evaluation of the role of location and distance in recruitment in respondent-driven sampling  

E-Print Network (OSTI)

of recruitment may there- fore be more complex in urban settings. They are never- theless likely to include many of the same basic patterns (eg recruiters recruiting contacts who are geographically more accessible to them in some way), and so the con- clusions... , 37 :151-207. 6. Volz E, Heckathorn D: Probability Based Estimation Theory for Respondent Driven Sampling. Journal of Official Statistics 2008, 24 :79-97. 7. Toledo L, Codeo CT, Bertoni N, Albuquerque E, Malta M, Bastos FI, Misuse obotBMSGoD: Putting...

McCreesh, Nicky; Johnston, Lisa G; Copas, Andrew; Sonnenberg, Pam; Seeley, Janet; Hayes, Richard J; Frost, Simon DW; White, Richard G

2011-10-18T23:59:59.000Z

437

Automated Demand Response Opportunities in Wastewater Treatment Facilities  

Science Conference Proceedings (OSTI)

Wastewater treatment is an energy intensive process which, together with water treatment, comprises about three percent of U.S. annual energy use. Yet, since wastewater treatment facilities are often peripheral to major electricity-using industries, they are frequently an overlooked area for automated demand response opportunities. Demand response is a set of actions taken to reduce electric loads when contingencies, such as emergencies or congestion, occur that threaten supply-demand balance, and/or market conditions occur that raise electric supply costs. Demand response programs are designed to improve the reliability of the electric grid and to lower the use of electricity during peak times to reduce the total system costs. Open automated demand response is a set of continuous, open communication signals and systems provided over the Internet to allow facilities to automate their demand response activities without the need for manual actions. Automated demand response strategies can be implemented as an enhanced use of upgraded equipment and facility control strategies installed as energy efficiency measures. Conversely, installation of controls to support automated demand response may result in improved energy efficiency through real-time access to operational data. This paper argues that the implementation of energy efficiency opportunities in wastewater treatment facilities creates a base for achieving successful demand reductions. This paper characterizes energy use and the state of demand response readiness in wastewater treatment facilities and outlines automated demand response opportunities.

Thompson, Lisa; Song, Katherine; Lekov, Alex; McKane, Aimee

2008-11-19T23:59:59.000Z

438

Collaborative recommender systems for building automation  

E-Print Network (OSTI)

Building Automation Systems (BASs) can save building owners money by reducing energy consumption while simultaneously preserving occupant comfort. There are algorithms that optimize this tradeoff, such as detecting which appliances are turned on without requiring expensive status detectors to be attached to each appliance. However, better ways are needed to determine which algorithms are best-suited to a particular building. This paper explores the idea of allowing building managers to automatically communicate among themselves and exchange ratings of individual monitoring and control algorithms in such a way that each building manager can then obtain predicted ratings for all algorithms that he has not yet tried personally. We allow individual algorithms to be replaced by using a blackboard architecture to loosen the coupling between them. We propose a recommender system that operates on a database of contributed ratings to predict ratings of untried algorithms. To explore this approach, we developed a prototype that seamlessly interacts with both emulated physical buildings and buildings simulated in software and we implemented several of the control algorithms described in previous works. We demonstrate a recommender system that selects between algorithms in various types of buildings. 1.

Michael Lemay; Jason J. Haas; Carl A. Gunter

2009-01-01T23:59:59.000Z

439

THE QUASIPERIODIC AUTOMATED TRANSIT SEARCH ALGORITHM  

Science Conference Proceedings (OSTI)

We present a new algorithm for detecting transiting extrasolar planets in time-series photometry. The Quasiperiodic Automated Transit Search (QATS) algorithm relaxes the usual assumption of strictly periodic transits by permitting a variable, but bounded, interval between successive transits. We show that this method is capable of detecting transiting planets with significant transit timing variations without any loss of significance-{sup s}mearing{sup -}as would be incurred with traditional algorithms; however, this is at the cost of a slightly increased stochastic background. The approximate times of transit are standard products of the QATS search. Despite the increased flexibility, we show that QATS has a run-time complexity that is comparable to traditional search codes and is comparably easy to implement. QATS is applicable to data having a nearly uninterrupted, uniform cadence and is therefore well suited to the modern class of space-based transit searches (e.g., Kepler, CoRoT). Applications of QATS include transiting planets in dynamically active multi-planet systems and transiting planets in stellar binary systems.

Carter, Joshua A. [Harvard-Smithsonian Center for Astrophysics, 60 Garden St., Cambridge, MA 02138 (United States); Agol, Eric [Department of Astronomy, Box 351580, University of Washington, Seattle, WA 98195 (United States)

2013-03-10T23:59:59.000Z

440

Automation Enhancement of Multilayer Laue Lenses  

SciTech Connect

X-ray optics fabrication at Brookhaven National Laboratory has been facilitated by a new, state of the art magnetron sputtering physical deposition system. With its nine magnetron sputtering cathodes and substrate carrier that moves on a linear rail via a UHV brushless linear servo motor, the system is capable of accurately depositing the many thousands of layers necessary for multilayer Laue lenses. I have engineered a versatile and automated control program from scratch for the base system and many subsystems. Its main features include a custom scripting language, a fully customizable graphical user interface, wireless and remote control, and a terminal-based interface. This control system has already been successfully used in the creation of many types of x-ray optics, including several thousand layer multilayer Laue lenses.Before reaching the point at which a deposition can be run, stencil-like masks for the sputtering cathodes must be created to ensure the proper distribution of sputtered atoms. Quality of multilayer Laue lenses can also be difficult to measure, given the size of the thin film layers. I employ my knowledge of software and algorithms to further ease these previously painstaking processes with custom programs. Additionally, I will give an overview of an x-ray optic simulator package I helped develop during the summer of 2010. In the interest of keeping my software free and open, I have worked mostly with the multiplatform Python and the PyQt application framework, utilizing C and C++ where necessary.

Lauer K. R.; Conley R.

2010-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Automated Galaxy Morphology: A Fourier Approach  

E-Print Network (OSTI)

We use automated surface photometry and pattern classification techniques to morphologically classify galaxies. The two-dimensional light distribution of a galaxy is reconstructed using Fourier series fits to azimuthal profiles computed in concentric elliptical annuli centered on the galaxy. Both the phase and amplitude of each Fourier component have been studied as a function of radial bin number for a large collection of galaxy images using principal component analysis. We find that up to 90 percent of the variance in many of these Fourier profiles may be characterized in as few as 3 principal components and their use substantially reduces the dimensionality of the classification problem. We use supervised learning methods in the form of artificial neural networks to train galaxy classifiers that detect morphological bars at the 85-90 percent confidence level and can identify the Hubble type with a 1-sigma scatter of 1.5 steps on the 16-step stage axis of the revised Hubble system. Finally, we systematically characterize the adverse effects of decreasing resolution and S/N on the quality of morphological information predicted by these classifiers.

S. C. Odewahn; S. H. Cohen; R. A. Windhorst; N. S. Philip

2001-10-11T23:59:59.000Z

442

Developing Automated Methods of Waste Sorting  

SciTech Connect

The U.S. Department of Energy (DOE) analyzed the need complex-wide for remote and automated technologies as they relate to the treatment and disposal of mixed wastes. This analysis revealed that several DOE sites need the capability to open drums containing waste, visually inspect and sort the contents, and finally repackage the containers that are acceptable at a waste disposal facility such as the Waste Isolation Pilot Plant (WIPP) in New Mexico. Conditioning contaminated waste so that it is compatible with the WIPP criteria for storage is an arduous task whether the waste is contact handled (waste having radioactivity levels below 200 mrem/hr) or remote handled. Currently, WIPP non-compliant items are removed from the waste stream manually, at a rate of about one 55-gallon drum per day. Issues relating to contamination-based health hazards as well as repetitive motion health hazards are steering industry towards a more user-friendly, method of conditioning or sorting waste.

Shurtliff, Rodney Marvin

2002-08-01T23:59:59.000Z

443

Process development for automated solar cell and module production. Task 4: automated array assembly. Quarterly report No. 2  

DOE Green Energy (OSTI)

Installation of the cell preparation station into its new enclosure is now complete and operation verification tests have been performed. The detailed layout drawings of the Automated Lamination Station have been produced and construction has begun. All major and most minor components have been delivered by vendors. The station framework has been built and assembly of components is underway. The final drawings for the Automated Vacuum Chamber are being completed and the first in-house components are being fabricated.

Hagerty, J. J.

1981-01-15T23:59:59.000Z

444

Process development for automated solar-cell and module production. Task 4. Automated array assembly. Quarterly report No. 3  

DOE Green Energy (OSTI)

The Automated Lamination Station is mechanically complete and is currently undergoing final wiring. The high current driver and isolator boards have been completed and installed, and the main interface board is under construction. The automated vacuum chamber has had a minor redesign to increase stiffness and improve the cover open/close mechanism. Design of the Final Assembly Station has been completed and construction is underway.

Hagerty, J. J.; Gifford, M.

1981-04-15T23:59:59.000Z

445

Neutron Scattering Experiment Automation with Python  

Science Conference Proceedings (OSTI)

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory currently holds the Guinness World Record as the world most powerful pulsed spallation neutron source. Neutrons scattered off atomic nuclei in a sample yield important information about the position, motions, and magnetic properties of atoms in materials. A neutron scattering experiment usually involves sample environment control (temperature, pressure, etc.), mechanical alignment (slits, sample and detector position), magnetic field controllers, neutron velocity selection (choppers) and neutron detectors. The SNS Data Acquisition System (DAS) consists of real-time sub-system (detector read-out with custom electronics, chopper interface), data preprocessing (soft real-time) and a cluster of control and ancillary PCs. The real-time system runs FPGA firmware and programs running on PCs (C++, LabView) typically perform one task such as motor control and communicate via TCP/IP networks. PyDas is a set of Python modules that are used to integrate various components of the SNS DAS system. It enables customized automation of neutron scattering experiments in a rapid and flexible manner. It provides wxPython GUIs for routine experiments as well as IPython command line scripting. Matplotlib and numpy are used for data presentation and simple analysis. We will present an overview of SNS Data Acquisition System and PyDas architectures and implementation along with the examples of use. We will also discuss plans for future development as well as the challenges that have to be met while maintaining PyDas for 20+ different scientific instruments.

Zolnierczuk, Piotr A [ORNL; Riedel, Richard A [ORNL

2010-01-01T23:59:59.000Z

446

Ice Slurry Medical Protective Organ Cooling: Buying Surgeons and Emergency Responders More Time  

NLE Websites -- All DOE Office Websites (Extended Search)

Slurry Medical Protective Organ Cooling: Slurry Medical Protective Organ Cooling: Buying Surgeons and Emergency Responders More Time Prepared by Ken Kasza* (PhD) and Yue Wu* (PhD) *Argonne National Laboratory 10-9-09 yuewu@anl.gov; 630-252-7203 Surgical procedures are pushing the limits of technical excision and becoming less invasive through the development and use of laparoscopic procedures assisted by surgeon/machine robotic manipulations. There is an unmet need to protect critical organs and various tissue masses during the course of surgical manipulations. Multiple tissue sites and organ systems that require complex operative manipulations to cure disease are often exposed to ischemic, traumatic, and xenobiotic insults that can result in loss of function or life-threatening conditions. Ice slurry production and delivery equipment developed by

447

Review of Requirements and Capabilities For Analyzing and Responding to Beyond Design Basis Events  

NLE Websites -- All DOE Office Websites (Extended Search)

to the to the Secretary of Energy Review of Requirements and Capabilities for Analyzing and Responding to Beyond Design Basis Events Office of Nuclear Safety Office of Health, Safety and Security U.S. Department of Energy August 2011 2011 Safety Bulletin Report TABLE OF CONTENTS Acronyms i Executive Summary ii 1. Introduction 1 2. Report Overview 1 3. Overview of DOE Nuclear Facilities and Operations 2 4. Analysis of Safety Bulletin Submittals 2 5. Review of DOE and Commercial Nuclear Power Industry Requirements and 5 Guidance for BDBEs 6. Results from the Nuclear Safety Workshop 9 7. Summary of Insights and Opportunities for Improvement 10 8. Summary of Recommendations 12 9. Conclusions 14

448

The RECS relies on the respondents to provide the energy related details of their homes  

Gasoline and Diesel Fuel Update (EIA)

Householder's Perceptions of Insulation Adequacy and Householder's Perceptions of Insulation Adequacy and Drafts in the Home in 2001 Behjat Hojjati , PhD Energy Information Administration U.S. Department of Energy 1000 Independence Ave., SW, EI-63 Washington, DC 20585 behjat.hojjati@eia.doe.gov September 2004 Abstract In order to improve the estimation of end-use heating consumption, the Energy Information Administration's (EIA), 2001 Residential Energy Consumption Survey (RECS), for the first time, asked respondents to judge how drafty they perceived their homes to be as a measure of insulation quality. The analysis of the 2001 RECS data shows that householders in newly- constructed homes perceived their homes to be better insulated and less drafty than do householders in older homes. Single-family homes are perceived to be better insulated and less

449

Review of Requirements and Capabilities For Analyzing and Responding to Beyond Design Basis Events  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Review of Requirements Review of Requirements and Capabilities for Analyzing and Responding to Beyond Design Basis Events Office of Nuclear Safety Office of Health, Safety and Security U.S. Department of Energy August 2011 2011 Safety Bulletin Report TABLE OF CONTENTS Acronyms i Executive Summary ii 1. Introduction 1 2. Report Overview 1 3. Overview of DOE Nuclear Facilities and Operations 2 4. Analysis of Safety Bulletin Submittals 2 5. Review of DOE and Commercial Nuclear Power Industry Requirements and 5 Guidance for BDBEs 6. Results from the Nuclear Safety Workshop 9 7. Summary of Insights and Opportunities for Improvement 10 8. Summary of Recommendations 12 9. Conclusions 14 Appendix A - DOE's Nuclear Safety Approach 15

450

Biosimmer: A Virtual Reality Simulator for Training First Responders in a BW Scenario  

SciTech Connect

BioSimMER (Bioterrorism Simulated Medical Emergency Response) is a Virtual Reality-based mission rehearsal and training environment. BioSimMER employs contingency-oriented, multiple-path algorithms and MOESINIOPS focused on real-world operations. BioSimMER is network-based and immerses multiple trainees in a high resolution synthetic environment, including virtual casualties and instruments that they may interact with and manipulate. Trainees are represented as individuals by virtual human Avatars. The simulation consists of several components: virtual casualties dynamically manifest the symptoms of their injuries and respond to the intervention of the trainees. Agent transport analysis is used to simulate casualty exposures and to drive the responses of simulated sensors/detectors. The selected prototype scenario is representative of combined injuries anticipated in BW operations.

Shawver, D.M.; Sobel, A.L.; Stansfield, S.A.

1998-11-11T23:59:59.000Z

451

WE?C?P?618?01: Radiological Awareness Training for First Responders and Health Care Providers  

Science Conference Proceedings (OSTI)

The Washington State Department of Health's Division of Environmental Health has been actively involved in providing radiological training for a broad spectrum of first responders and health care providers since 2003

J Adair

2005-01-01T23:59:59.000Z

452

KSL Kuttler Automation Systems GmbH | Open Energy Information  

Open Energy Info (EERE)

KSL Kuttler Automation Systems GmbH KSL Kuttler Automation Systems GmbH Jump to: navigation, search Name KSL-Kuttler Automation Systems GmbH Place Dauchingen, Baden-Württemberg, Germany Zip 78083 Sector Solar Product KSL-Kuttler Automation Systems GmbH is a manufacturer of automation systems for the PCB-industry and solar industry. KSL Kuttler was acquired by Suntech in April 2008. Coordinates 48.090319°, 8.552377° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.090319,"lon":8.552377,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

453

Automated roller shades : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated roller shades Automated roller shades Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Automated roller shades Automated roller shades manage daylight, solar heat gains, view, glare, privacy, and building appearance through changes in shade height. A roller shade consists of a fabric wrapped around a horizontal tube, which contains a tubular motor. The tubular motor rotates when ac- or dc- power is applied to it causing modulation in shade height. The control system can be designed to optimize numerous variables, the most common being control of direct sun. In this application, the shades were controlled to five preset heights that aligned with the architectural features of the façade - i.e., the vision portion of the window wall - so that direct sun penetrated no more than a specified distance from the window wall. The Times Company also requested that the shades control window glare, yet maximize the opportunity for view and daylight admission. Unnecessary up/down movement of the shade was to be minimized. Fabric choices (openness of the weave, color of the fabric facing toward the interior and exterior) were additional considerations in terms of appearance as well as visual comfort and daylighting benefits.

454

Open Automated Demand Response Communications Specification (Version 1.0)  

Science Conference Proceedings (OSTI)

The development of the Open Automated Demand Response Communications Specification, also known as OpenADR or Open Auto-DR, began in 2002 following the California electricity crisis. The work has been carried out by the Demand Response Research Center (DRRC), which is managed by Lawrence Berkeley National Laboratory. This specification describes an open standards-based communications data model designed to facilitate sending and receiving demand response price and reliability signals from a utility or Independent System Operator to electric customers. OpenADR is one element of the Smart Grid information and communications technologies that are being developed to improve optimization between electric supply and demand. The intention of the open automated demand response communications data model is to provide interoperable signals to building and industrial control systems that are preprogrammed to take action based on a demand response signal, enabling a demand response event to be fully automated, with no manual intervention. The OpenADR specification is a flexible infrastructure to facilitate common information exchange between the utility or Independent System Operator and end-use participants. The concept of an open specification is intended to allow anyone to implement the signaling systems, the automation server or the automation clients.

Piette, Mary Ann; Ghatikar, Girish; Kiliccote, Sila; Koch, Ed; Hennage, Dan; Palensky, Peter; McParland, Charles

2009-02-28T23:59:59.000Z

455

Variability in Automated Responses of Commercial Buildings and Industrial Facilities to Dynamic Electricity Prices  

Science Conference Proceedings (OSTI)

Changes in the electricity consumption of commercial buildings and industrial facilities (C&I facilities) during Demand Response (DR) events are usually estimated using counterfactual baseline models. Model error makes it difficult to precisely quantify these changes in consumption and understand if C&I facilities exhibit event-to-event variability in their response to DR signals. This paper seeks to understand baseline model error and DR variability in C&I facilities facing dynamic electricity prices. Using a regression-based baseline model, we present a method to compute the error associated with estimates of several DR parameters. We also develop a metric to determine how much observed DR variability results from baseline model error rather than real variability in response. We analyze 38 C&I facilities participating in an automated DR program and find that DR parameter errors are large. Though some facilities exhibit real DR variability, most observed variability results from baseline model error. Therefore, facilities with variable DR parameters may actually respond consistently from event to event. Consequently, in DR programs in which repeatability is valued, individual buildings may be performing better than previously thought. In some cases, however, aggregations of C&I facilities exhibit real DR variability, which could create challenges for power system operation.

Mathieu, Johanna L.; Callaway, Duncan S.; Kiliccote, Sila

2011-08-16T23:59:59.000Z

456

ENVIRONMENTAL COALITION ON NUCLEAR POWER Phone/Fax: 814-237-3900 433 Orlando Avenue, State College, PA 16803 e-mail: johnsrud@csrlink  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

COALITION ON NUCLEAR POWER Phone/Fax: 814-237-3900 433 COALITION ON NUCLEAR POWER Phone/Fax: 814-237-3900 433 Orlando Avenue, State College, PA 16803 e-mail: johnsrud@csrlink.net January 29, 1998 U.S. Department of Energy Office of General Counsel CC-52 RE: 62 FR 68272 1000 Independence Avenue SW Price-Anderson Act Washington, D.C. 20585 Dear Madam or Sir: We have just been notified of the December 31, 1997, Federal Register Notice of opportunity for public comment on the Price-Anderson Act (PAA). Please accept for the Department's record in this matter the following comments submitted by the Pennsylvania-based Environmental Coalition on Nuclear Power (ECNP), a not-for-profit public-interest citizens' organization that has been actively involved in a broad range of nuclear energy and radioactive waste issues since

457

Process development for automated solar cell and module production. Task 4. Automated array assembly. Annual report  

DOE Green Energy (OSTI)

MBA has been working on the automated array assembly task of the Low-Cost Solar Array project. A baseline sequence for the manufacture of solar cell modules is specified. Starting with silicon wafers, the process goes through damage etching, texture etching, junction formation, plasma edge etch, aluminum back surface field formation, and screen printed metallization to produce finished solar cells which are then series connected on a ribbon and bonded into a finished glass, PVB, tedlar module. A number of steps required additional developmental effort to verify technical and economic feasibility. These steps include texture etching, plasma edge etch, aluminum back surface field formation, array layup and interconnect, and module edge sealing and framing.

Witham, C.R.

1979-06-12T23:59:59.000Z

458

Market transformation lessons learned from an automated demand response test in the Summer and Fall of 2003  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large FacilitiesLearned from an Automated Demand Response Test in the SummerLearned from an Automated Demand Response Test in the Summer

Shockman, Christine; Piette, Mary Ann; ten Hope, Laurie

2004-01-01T23:59:59.000Z

459

Aescusoft GmbH Automation | Open Energy Information  

Open Energy Info (EERE)

Aescusoft GmbH Automation Aescusoft GmbH Automation Jump to: navigation, search Name Aescusoft GmbH Automation Place Ettenheim, Germany Zip 77955 Product Offers PV cell testing lines. Coordinates 48.256309°, 7.813654° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.256309,"lon":7.813654,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

460

DA (Distribution Automation) (Smart Grid Project) | Open Energy Information  

Open Energy Info (EERE)

DA (Distribution Automation) (Smart Grid Project) DA (Distribution Automation) (Smart Grid Project) Jump to: navigation, search Project Name DA (Distribution Automation) Country Netherlands Coordinates 52.132633°, 5.291266° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":52.132633,"lon":5.291266,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

title Automated Price and Demand Response Demonstration for Large Customers  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Price and Demand Response Demonstration for Large Customers Automated Price and Demand Response Demonstration for Large Customers in New York City using OpenADR booktitle International Conference for Enhanced Building Operations ICEBO year month address Montreal Quebec abstract p class p1 Open Automated Demand Response OpenADR an XML based information exchange model is used to facilitate continuous price responsive operation and demand response participation for large commercial buildings in New York who are subject to the default day ahead hourly pricing We summarize the existing demand response programs in New York and discuss OpenADR communication prioritization of demand response signals and control methods Building energy simulation models are developed and field tests are conducted to evaluate continuous energy management

462

HEADLINE: DOE Pursues Automation in West Virginia Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

HEADLINE: DOE Pursues Automation in West Virginia Lab HEADLINE: DOE Pursues Automation in West Virginia Lab By Elizabeth McGowan Hakan Inan can envision a day in the near future when electric utilities will be able to find and isolate faults, then restore service-in record time and without human intervention. His goal is to create a model for automating the process of locating a fault and reconfiguring the feeder. And in utility circles, it's considered very tricky because nobody has yet perfected the process, even though the hardware and software have become available during the last several years. Hakan Inan, is an electrical engineer for Science Applications International Corporation, providing support to the NETL Modern Grid Strategy Program through Research and Development Solutions, LLC, is experimenting with this technology in Morgantown, W.V.,

463

International Automated Systems Inc IAUS | Open Energy Information  

Open Energy Info (EERE)

International Automated Systems Inc IAUS International Automated Systems Inc IAUS Jump to: navigation, search Name International Automated Systems Inc (IAUS) Place Salem, Utah Zip 84653 Product Has developed a lens-based technology for concentrating heat in STEGSs, which it plans to deploy at projects. Coordinates 42.554485°, -88.110549° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.554485,"lon":-88.110549,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

464

Automation and security of Supply (Smart Grid Project) | Open Energy  

Open Energy Info (EERE)

Automation and security of Supply (Smart Grid Project) Automation and security of Supply (Smart Grid Project) Jump to: navigation, search Project Name Automation and security of Supply Country Denmark Coordinates 56.26392°, 9.501785° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":56.26392,"lon":9.501785,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

465

Automated Demand Response Strategies and Commissioning CommercialBuilding Controls  

SciTech Connect

California electric utilities have been exploring the use of dynamic critical peak pricing (CPP) and other demand response programs to help reduce peaks in customer electric loads. CPP is a new electricity tariff design to promote demand response. This paper begins with a brief review of terminology regarding energy management and demand response, followed by a discussion of DR control strategies and a preliminary overview of a forthcoming guide on DR strategies. The final section discusses experience to date with these strategies, followed by a discussion of the peak electric demand savings from the 2005 Automated CPP program. An important concept identified in the automated DR field tests is that automated DR will be most successful if the building commissioning industry improves the operational effectiveness of building controls. Critical peak pricing and even real time pricing are important trends in electricity pricing that will require new functional tests for building commissioning.

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-05-01T23:59:59.000Z

466

Automated Dna Curvature Profile Reconstruction In Atomic Force  

E-Print Network (OSTI)

An automated algorithm is presented to determine the DNA molecule intrinsic curvature profiles and the molecular spatial orientations in Atomic Force Microscope images. The curvature is composed by static and dynamic contributions. The first one is the intrinsic curvature, vectorial function of the DNA nucletide sequence, while the second one is due to thermal noise. This algorithm allows to reconstruct the intrinsic curvature profile excluding the thermal contribution and detects fragment orientation on AFM image with a percentage of molecular-orientation detection of 96.79 % for molecules with a high curvature peak. The automated approach allows to minimize the processing time compared to semi-automated methods, avoids errors introduced from operator bias and increases the amount of available information.

Microscope Images Elisa; Elisa Ficarra; Daniele Masotti; Luca Benini; Michela Milano

2002-01-01T23:59:59.000Z

467

PROBE: a feasibility demonstration of substation and distribution automation  

SciTech Connect

Substation and distribution automation has existed for a number of years with varying degrees of sophistication. Recently trial installations have been initiated utilizing digital computer technology and advanced electronics to accomplish automation of certain substation functions. Investigations are also under way of remote meter reading and customer load management. The PROBE project is a research investigation to determine the feasibility of sampling data and creation of a data base to achieve these functions using digital techniques. A key objective of PROBE is to demonstrate the feasibility of utilizing data base information to make sophisticated decisions automatically and achieve a degree of coordination between functions not hitherto attainable. The equipment used, test procedures and results are described. Experience from the PROBE feasibility demonstration and Phase 1 tests show that the described substation and distribution automation implementation techniques are viable.

Croghan, J.F. (Commonwealth Edison Co., Maywood, IL); Jenkins, D.R.; Rushden, F.A.; Bunch, J.B.; Gurr, G.P.

1977-01-01T23:59:59.000Z

468

Computer-automated controls for superconducting magnetic energy storage  

DOE Green Energy (OSTI)

A computer-automated control system that allows unmanned operation of the Superconducting Magnetic Energy Storage (SMES) system has been designed and almost completely installed at Los Alamos National Laboratory. In addition to unmanned operation, the computer offers continual monitoring and recording of all the important SMES signals, operator guidance in starting up and maintaining SMES, emergency shutdown control, and high-speed data acquisition for failure diagnosis. The major components of the computer-automated control system are two slave computers that perform the data acquisition and a master computer that performs the control.

Criscuolo, A.L.

1981-01-01T23:59:59.000Z

469

Rockwell Automation & General Mills Teaming Profile | ENERGY STAR Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation & General Mills Teaming Profile Rockwell Automation & General Mills Teaming Profile Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

470

A Key-Distribution Scheme for Wireless Home Automation Networks  

E-Print Network (OSTI)

Wireless home automation networks are one example of how wireless technologies may soon become part of our daily life, yet security in existing products is woefully inadequate. An important problem in this area is the question of secure key distribution. In this paper we present a key-distribution scheme geared towards home automation networks, but applicable to other networks with related properties as well. Our approach uses a decentralized scheme that is designed to work on resource-poor devices, allows easy addition and removal of devices and limits the workload on the end user while guaranteeing the secrecy of the exchanged keys even in the presence of subverted nodes.

Arno Wacker; Timo Heiber; Holger Cermann

2004-01-01T23:59:59.000Z

471

Certificates for Automated Clients Status of This Memo  

E-Print Network (OSTI)

This memo provides information to the Grid community regarding new class of certificates for automated Grid Clients. It does not define any standards or technical recommendations. Distribution is unlimited. Copyright Notice Copyright Global Grid Forum (2003). All Rights Reserved. In evaluating Grid technology for production use, several members of the DOESG community feel there is a need for another class of certificates to be used for authenticating automated clients that connect to Grid servers. The usage of these new certificates is different enough so that current CP policies will need to be updated. Contents

Stephen Chan Nersc/lbnl; Matt Crawford Fnal

2003-01-01T23:59:59.000Z

472

An Automated System for the Analysis of Gravity Waves and Other Mesoscale Phenomena  

Science Conference Proceedings (OSTI)

An automated near-real-time system for the surface analysis of gravity waves and other mesoscale phenomena is developed, tested, and applied to several cases. Five-minute observations from the Automated Surface Observing System (ASOS) network ...

Steven E. Koch; Stephen Saleeby

2001-12-01T23:59:59.000Z

473

Automation of a hydroelectric power station using variable-structure control systems  

Science Conference Proceedings (OSTI)

This article presents the basis and conception of, and some experimental results obtained from, the automation of a hydroelectric power station. The principle of this automation, the purpose of which was to maximize the active power supplied by the station, ...

J. Erschler; F. Roubellat; J. P. Vernhes

1974-01-01T23:59:59.000Z

474

Development and Evaluation of an Automated Annotation Pipeline and cDNA Annotation System  

E-Print Network (OSTI)

Development and Evaluation of an Automated Annotation Pipeline and cDNA Annotation System Takeya, including an automated annotation pipeline that provides high-quality preliminary annotation for each

Gough, Julian

475

Using Jini to Integrate Home Automation in a Distributed Software-System  

Science Conference Proceedings (OSTI)

The last few years, a tendency arose to integrate various programmable devices through ever expanding computer networks. One particular domain in which this evolution stood out clearly is home automation. The EIB standard defines a home automation solution ...

Peter Rigole; Tom Holvoet; Yolande Berbers

2002-04-01T23:59:59.000Z

476

Design and Performance Analysis of an Automated 10-Channel Solar Radiometer Instrument  

Science Conference Proceedings (OSTI)

An automated multichannel solar radiometer has been designed and fabricated by the Atmospheric Remote Sensing Laboratory at The University of Arizona. The automated radiometer has 10 separate silicon-photodiode-based channels that allow near-...

A. R. Ehsani; J. A. Reagan; W. H. Erxleben

1998-06-01T23:59:59.000Z

477

Automated ground maintenance and health management for autonomous unmanned aerial vehicles  

E-Print Network (OSTI)

Automated ground maintenance is a necessity for multi-UAV systems. Without such automation, these systems will become more of a burden than a benefit as human operators struggle to contend with maintenance operations for ...

Dale, Daniel R., M. Eng. Massachusetts Institute of Technology

2007-01-01T23:59:59.000Z

478

Automated scoring for creative problem-solving ability with ideation-explanation modeling  

E-Print Network (OSTI)

Abstract. This paper describes an automated scorer for assessing students Creative Problem-Solving (CPS) abilities via modeling the intra-structure of students essays describing their thoughts on solving particular problems. The automated scorer aims

Hao-chuan Wang; Chun-yen Chang; Tsai-yen Li

2005-01-01T23:59:59.000Z

479

Design of an automated sorting and orienting machine for electronic pins  

E-Print Network (OSTI)

At the power electronics manufacturer SynQor, the printed circuit board (PCB) assembly line is fully automated with the exception of the step which inserts electronic pins into the PCBs. Past attempts to automate this ...

Chang, Michelle Sueway

2012-01-01T23:59:59.000Z

480

ETM (Distribution Network Automation on 10 kV cable line stations...  

Open Energy Info (EERE)

ETM (Distribution Network Automation on 10 kV cable line stations) (Smart Grid Project) Jump to: navigation, search Project Name ETM (Distribution Network Automation on 10 kV cable...

Note: This page contains sample records for the topic "automated respondent mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Functions and Requirements and Specifications for Replacement of the Computer Automated Surveillance System (CASS)  

SciTech Connect

Functional requirements and specifications document for system to replace tank farm computer automated waste tank surveillance system.

DOUKA, K.C.

2000-05-05T23:59:59.000Z

482

Mobile biometric device (MBD) technology : summary of selected first responder experiences in pilot projects.  

SciTech Connect

Mobile biometric devices (MBDs) capable of both enrolling individuals in databases and performing identification checks of subjects in the field are seen as an important capability for military, law enforcement, and homeland security operations. The technology is advancing rapidly. The Department of Homeland Security Science and Technology Directorate through an Interagency Agreement with Sandia sponsored a series of pilot projects to obtain information for the first responder law enforcement community on further identification of requirements for mobile biometric device technology. Working with 62 different jurisdictions, including components of the Department of Homeland Security, Sandia delivered a series of reports on user operation of state-of-the-art mobile biometric devices. These reports included feedback information on MBD usage in both operational and exercise scenarios. The findings and conclusions of the project address both the limitations and possibilities of MBD technology to improve operations. Evidence of these possibilities can be found in the adoption of this technology by many agencies today and the cooperation of several law enforcement agencies in both participating in the pilot efforts and sharing of information about their own experiences in efforts undertaken separately.

Aldridge, Chris D.

2013-06-01T23:59:59.000Z

483

Automated forensic fingerprint analysis: a novel generic process model and container format  

Science Conference Proceedings (OSTI)

The automated forensic analysis of latent fingerprints poses a new challenge. While for the pattern recognition aspects involved, the required processing steps can be related to fingerprint biometrics, the common biometric model needs to be extended ... Keywords: automated dactyloscopy, automated forensic analysis, forensic container format, multibranched biometric process

Tobias Kiertscher; Claus Vielhauer; Marcus Leich

2011-03-01T23:59:59.000Z

484

Abstract -The paper discusses automated substation data integration and analysis. Recorded data collected  

E-Print Network (OSTI)

Control and Data Acquisition (SCADA) and Energy Management System (EMS) applications of substation environment of substation automation project. It provides data to a number of application including automated1 Abstract--With the deregulation and restructuring of utility industry, many substation automation

Kezunovic, Mladen

485

Abstract--With the deregulation and restructuring of utility industry, many substation automation applications are being  

E-Print Network (OSTI)

Control and Data Acquisition (SCADA) and Energy Management System (EMS) applications of substation environment of substation automation project. It provides data to a number of application including automated1 Abstract--With the deregulation and restructuring of utility industry, many substation automation

486

Making technology homey: finding sources of satisfaction and meaning in home automation  

Science Conference Proceedings (OSTI)

Home and automation are not natural partners--one homey and the other cold. Most current automation in the home is packaged in the form of appliances. To better understand the current reality and possible future of living with other types of domestic ... Keywords: home automation, need finding

Leila Takayama; Caroline Pantofaru; David Robson; Bianca Soto; Michael Barry

2012-09-01T23:59:59.000Z

487

On cost-effectiveness of human-centered and socially acceptable robot and automation systems  

Science Conference Proceedings (OSTI)

This paper considers human-centered and socially appropriate robots as well as automation systems within the context of their cost-effectiveness. Usually, the objection of system designers is that approaches for human-centered and socio-technical design ... Keywords: Cost-effective automation, Human factors, Human-centered systems, Robots, Socially appropriate automation, Socio-technical systems

Janko Cernetic

2003-06-01T23:59:59.000Z

488

Automating the Selection of Fenestration Systems to Best Meet Daylighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Automating the Selection of Fenestration Systems to Best Meet Daylighting Automating the Selection of Fenestration Systems to Best Meet Daylighting Performance Goals Title Automating the Selection of Fenestration Systems to Best Meet Daylighting Performance Goals Publication Type Conference Paper LBNL Report Number LBNL-53003 Year of Publication 2003 Authors Fernandes, Luis L., and Konstantinos M. Papamichael Conference Name 2003 International Building Performance Simulation Association Conference Date Published 02/2003 Conference Location Eindhoven, Netherlands Call Number LBNL-53003 Abstract Traditional selection of fenestration systems follows a trial-and-error approach, i.e., iterative selection of fenestration systems and evaluation of their performance through the use of simulation tools and techniques. This paper is about the development of a new method, which inverts traditional practice, i.e., aims at automated selection of fenestration systems that best meet specific lighting performance goals. The new method is based on manipulation of matrices that represent the optical properties of fenestration systems, the propagation of light in interior spaces, and the outdoors luminous conditions. The method follows two steps: 1) the determination of the luminous flux distribution originating from the location of the fenestration that best meets the desired lighting performance goals and 2) the selection of the fenestration system that comes closer to producing the desired flux distribution from the outdoor daylight distribution.

489

IT-Security for Safety-Critical Automation Systems  

E-Print Network (OSTI)

The protection of safety-critical and infrastructure systems (such as automation systems for utilities, but also for manufacturing plants) against electronic and communication network based attacks becomes more and more important. This paper investigates how such safety-critical plants and automation systems can be secured against information system and network based attacks. The two common approaches, hard perimeter, and defense-in-depth are discussed. Based on the defense-in-depth approach, a conceptional, generic security zone model for use in analysis and synthesis of a plant security architecture is proposed, and for each of its zones a survey of the available and appropriate security mechanisms is given. Using an example from the substation automation domain, it is shown how threats and counter-measures can be systematically derived and how the specific system and usage characteristics of automation systems (or at least their restricted safety critical sub-functions) can be exploited in a positive way to deploy security mechanisms that would in this form not be available and applicable to home or office information systems. 1.

Martin Naedele

2002-01-01T23:59:59.000Z

490

Evidence algorithm and system for automated deduction: a retrospective view  

Science Conference Proceedings (OSTI)

A research project aimed at the development of an automated theorem proving system was started in Kiev (Ukraine) in early 1960s. The mastermind of the project, Academician V. Glushkov, baptized it "Evidence Algorithm", EA1. The work on the project lasted, ...

Alexander Lyaletski; Konstantin Verchinine

2010-07-01T23:59:59.000Z

491

The function of semantics in automated language processing  

Science Conference Proceedings (OSTI)

This paper is a survey of some of the major semantic models that have been developed for automated semantic analysis of natural language. Current approaches to semantic analysis and logical inference are based mainly on models of human cognitive processes ... Keywords: computational linguistics, grammars, natural language processing, semantics

Milos Pacak; Arnold W. Pratt

1971-04-01T23:59:59.000Z

492

Automated Source-Level Error Localization in Hardware Designs  

Science Conference Proceedings (OSTI)

Recent achievements in formal verification techniques allow for fault detection even in large real-world designs. Tool support for localizing the faulty statements is critical, because it reduces development time and overall project costs. Automated ... Keywords: design error diagnosis, software debugging, model-based diagnosis, fault localization

Bernhard Peischl; Franz Wotawa

2006-01-01T23:59:59.000Z

493

Automated Temperature and Relative Humidity Calibrations for the Oklahoma Mesonetwork  

Science Conference Proceedings (OSTI)

A low-cost (under $12,000), fully automated, relative humidity calibration chamber capable of testing up to six probes simultaneously over a range of humidifies from 5% to approximately 95% is designed, constructed, and tested for use by the ...

Scott J. Richardson

1995-08-01T23:59:59.000Z

494

Opportunities for Automated Demand Response in Wastewater Treatment  

NLE Websites -- All DOE Office Websites (Extended Search)

Opportunities for Automated Demand Response in Wastewater Treatment Opportunities for Automated Demand Response in Wastewater Treatment Facilities in California - Southeast Water Pollution Control Plant Case Study Title Opportunities for Automated Demand Response in Wastewater Treatment Facilities in California - Southeast Water Pollution Control Plant Case Study Publication Type Report LBNL Report Number LBNL-6056E Year of Publication 2012 Authors Olsen, Daniel, Sasank Goli, David Faulkner, and Aimee T. McKane Date Published 12/2012 Publisher CEC/LBNL Keywords market sectors, technologies Abstract This report details a study into the demand response potential of a large wastewater treatment facility in San Francisco. Previous research had identified wastewater treatment facilities as good candidates for demand response and automated demand response, and this study was conducted to investigate facility attributes that are conducive to demand response or which hinder its implementation. One years' worth of operational data were collected from the facility's control system, submetered process equipment, utility electricity demand records, and governmental weather stations. These data were analyzed to determine factors which affected facility power demand and demand response capabilities.

495

Automating the mutation testing of aspect-oriented Java programs  

Science Conference Proceedings (OSTI)

Aspect-Oriented Programming has introduced new types of software faults that may be systematically tackled with mutation testing. However, such testing approach requires adequate tooling support in order to be properly performed. This paper addresses ... Keywords: aspect-oriented programming, mutation testing, test automation, testing tools

Fabiano Cutigi Ferrari; Elisa Yumi Nakagawa; Awais Rashid; Jos Carlos Maldonado

2010-05-01T23:59:59.000Z

496

An efficient electronic archiving approach for office automation  

Science Conference Proceedings (OSTI)

Recentlly, electronic archives are becoming very important for office automation. Minimizing the size of the stored data in electronic archive is a main issue to reduce the phyzical storage area. In this paper, the effect of different types of Arabic ... Keywords: cross correlation, electronic archiving, fast word detection, frequency domain

Hazem M. El-Bakry; Nikos Mastorakis

2009-06-01T23:59:59.000Z

497

A simulation tool for automated platooning in mixed highway scenarios  

Science Conference Proceedings (OSTI)

Automated platooning is one of the most challenging fields in the domain of ITS. Conceptually, platooning means creating clusters of vehicles which closely follow each other autonomously without action of the driver, neither for accelerating, nor for ... Keywords: cooperative adaptive cruise control, platooning, simulation, vehicular networks

Michele Segata; Falko Dressler; Renato Lo Cigno; Mario Gerla

2012-08-01T23:59:59.000Z

498

Automated composition of Web services via planning in asynchronous domains  

Science Conference Proceedings (OSTI)

The service-oriented paradigm promises a novel degree of interoperability between business processes, and is leading to a major shift in way distributed applications are designed and realized. While novel and more powerful services can be obtained, in ... Keywords: Automated program synthesis, Planning, Web services

Piergiorgio Bertoli; Marco Pistore; Paolo Traverso

2010-03-01T23:59:59.000Z

499

The ironies of automation: still going strong at 30?  

Science Conference Proceedings (OSTI)

Motivation -- Bainbridge highlighted some of the ironies of automation 30 years ago and identified possible solutions. Society is now highly dependent on complex technological systems, so we assess our performance in addressing the ironies in ... Keywords: ergonomics, human factors, resilience, systems engineering

Gordon Baxter; John Rooksby; Yuanzhi Wang; Ali Khajeh-Hosseini

2012-08-01T23:59:59.000Z

500

An extensive study on automated Dewey Decimal Classification  

Science Conference Proceedings (OSTI)

In this paper, we present a theoretical analysis and extensive experiments on the automated assignment of Dewey Decimal Classification (DDC) classes to bibliographic data with a supervised machine-learning approach. Library classification systems, such ... Keywords: Dewey Decimal Classification, automatic classification, hierarchical classification, hierarchical models, tree structures

Jun Wang

2009-11-01T23:59:59.000Z