Powered by Deep Web Technologies
Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

E-Print Network 3.0 - automated guideway transit Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Edition INTRODUCTION AND CONCEPTS Summary: for evaluating the capacity of heavy rail (rapid) transit, light rail, commuter rail, automated guideway transit... Transit Capacity...

2

Expansion joint for guideway for magnetic levitation transportation system  

DOE Patents [OSTI]

An expansion joint that allows a guideway of a magnetic levitation transportation system to expand and contract while minimizing transients occurring in the magnetic lift and drag forces acting on a magnetic levitation vehicle traveling over the joint includes an upper cut or recess extending downwardly from the upper surface of the guideway and a non-intersecting lower cut or recess that extends upwardly from the lower surface of the guideway. The side walls of the cuts can be parallel to each other and the vertical axis of the guideway; the depth of the lower cut can be greater than the depth of the upper cut; and the overall combined lengths of the cuts can be greater than the thickness of the guideway from the upper to lower surface so that the cuts will overlap, but be spaced apart from each other. The distance between the cuts can be determined on the basis of the force transients and the mechanical behavior of the guideway. A second pair of similarly configured upper and lower cuts may be disposed in the guideway; the expansion joint may consist of two upper cuts and one lower cut; or the cuts may have non-parallel, diverging side walls so that the cuts have a substantially dove-tail shape.

Rossing, T.D.

1993-02-09T23:59:59.000Z

3

Expansion joint for guideway for magnetic levitation transportation system  

DOE Patents [OSTI]

An expansion joint that allows a guideway of a magnetic levitation transportation system to expand and contract while minimizing transients occurring in the magnetic lift and drag forces acting on a magnetic levitation vehicle traveling over the joint includes an upper cut or recess extending downwardly from the upper surface of the guideway and a non-intersecting lower cut or recess that extends upwardly from the lower surface of the guideway. The sidewalls of the cuts can be parallel to each other and the vertical axis of the guideway; the depth of the lower cut can be greater than the depth of the upper cut; and the overall combined lengths of the cuts can be greater than the thickness of the guideway from the upper to lower surface so that the cuts will overlap, but be spaced apart from each other. The distance between the cuts can be determined on the basis of the force transients and the mechanical behavior of the guideway. A second pair of similarly configured upper and lower cuts may be disposed in the guideway; the expansion joint may consist of two upper cuts and one lower cut; or the cuts may have non-parallel, diverging sidewalls so that the cuts have a substantially dove-tail shape.

Rossing, Thomas D. (DeKalb, IL)

1993-01-01T23:59:59.000Z

4

leftfielder inclination,  

E-Print Network [OSTI]

in 4.0 seconds. How hard, and with what angle of inclination, must the ball be thrown to prevent resistance is proportional to the square of the speed -- ignore wind -- the umpire is in a good position

Meade, Douglas B.

5

Viability of Modern Automated Rapid Transit Applications  

E-Print Network [OSTI]

guideway: elevated, underground, at grade · Fully automated: electric-powered, electronic controls · Non · Headways/frequency: about 30 seconds/120 veh/hr · Small vehicles: 4-6 passengers, low weight · Eco: 4 km, 21 vehicles, two stations (parking and terminal) · Open to public service Spring 2011, 22

Minnesota, University of

6

Cost-effectiveness of freeway median high occupancy vehicle (HOV) facility conversion to rail guideway transit  

E-Print Network [OSTI]

Many freeways in the United States contain median high occupancy vehicle (HOV) facilities. These facilities have been envisioned by some as reserved space for future rail guideway transit. This thesis examines the cost-effectiveness of converting a...

Best, Matthew Evans

2012-06-07T23:59:59.000Z

7

Weatherford Inclined Wellbore Construction  

SciTech Connect (OSTI)

The Rocky Mountain Oilfield Testing Center (RMOTC) has recently completed construction of an inclined wellbore with seven (7) inch, twenty-three (23) pound casing at a total depth of 1296 feet. The inclined wellbore is near vertical to 180 feet with a build angle of approximately 4.5 degrees per hundred feet thereafter. The inclined wellbore was utilized for further proprietary testing after construction and validation. The wellbore is available to other companies requiring a cased hole environment with known deviation out to fifty degrees (50) from vertical. The wellbore may also be used by RMOTC for further deepening into the fractured shales of the Steele and Niobrara formation.

Schulte, R.

2002-08-19T23:59:59.000Z

8

Test Automation Test Automation  

E-Print Network [OSTI]

Test Automation Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2013 Mousavi: Test Automation #12;Test Automation Outline Test Automation Mousavi: Test Automation #12;Test Automation Why? Challenges of Manual Testing Test-case design: Choosing inputs

Mousavi, Mohammad

9

Flow visualisation in inclined louvered fins  

SciTech Connect (OSTI)

In this study the flow within an interrupted fin design, the inclined louvered fin, is investigated experimentally through visualisation. The inclined louvered fin is a hybrid of the offset strip fin and standard louvered fin, aimed at improved performance at low Reynolds numbers for compact heat exchangers. The flow behaviour is studied in six geometrically different configurations over a range of Reynolds numbers and quantified using the concept of 'fin angle alignment factor'. The transition from steady laminar to unsteady flow was studied in detail. The fin geometry had a very large impact on the transitional flow behaviour, especially on vortex shedding. (author)

T'Joen, C.; De Paepe, M. [Department of Flow, Heat and Combustion Mechanics, Ghent University-UGent, Sint-Pietersnieuwstraat 41, 9000 Gent (Belgium); Jacobi, A. [Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, 1206 West Green Street, Urbana, IL 61801 (United States)

2009-04-15T23:59:59.000Z

10

Automation Status  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

NREL Manufacturing R&D Workshop NREL Manufacturing R&D Workshop NREL H2/FC Manufacturing R&D Workshop Automation Status Garry Sperrick garry@sperkllc.com 585-259-0311 August 11, 2011 Automation Status NREL Manufacturing R&D Workshop Presentation Overview ƒ Brief Introduction ƒ DOE / NREL - Review & Discussion ƒ Automation Platforms ƒ Automation Processes ƒ Automation Considerations of the Manufacturer ƒ Manufacturer and the Supplier ƒ Three (3) Automation Programs Following these Guidelines ƒ Automotive Component Manufacturing ƒ Medical Manufacturing ƒ Membrane Electrode Assembly Manufacturing ƒ Hypothetical Fuel Cell Manufacturing Platforms August 11, 2011 Automation Status NREL Manufacturing R&D Workshop Professional Bio ƒ Automation Technician - Mobil Chemical

11

Home Automation  

E-Print Network [OSTI]

In this paper I briefly discuss the importance of home automation system. Going in to the details I briefly present a real time designed and implemented software and hardware oriented house automation research project, capable of automating house's electricity and providing a security system to detect the presence of unexpected behavior.

Ahmed, Zeeshan

2010-01-01T23:59:59.000Z

12

Roughening and inclination of competition interfaces  

E-Print Network [OSTI]

The competition interface between two growing ``Young clusters'' (diagrams), in a two-dimensional random cone, is mapped to the path of a second-class particle in the one-dimensional totally asymmetric simple exclusion process. Using the asymptotics of the second class particle and hydrodynamic limits for the exclusion process (Burgers equation), we show that the behavior of the competition interface depends on the angle of the cone: for angles in [180^o, 270^o) the competition interface has a deterministic inclination, while for angles in [90^o,180^o) the inclination is random. We relate the competition model to a model of random directed polymers, and obtain some partial results for the fluctuations of the competition interface.

Pablo A. Ferrari; James B. Martin; Leandro P. R. Pimentel

2004-12-09T23:59:59.000Z

13

Inclination Effects in Spiral Galaxy Gravitational Lensing  

E-Print Network [OSTI]

Spheroidal components of spiral galaxies have been considered the only dynamically important component in gravitational lensing studies thus far. Here we point out that including the disk component can have a significant effect, depending on the disk inclination, on a variety of lensing properties that are relevant to present studies and future surveys. As an example, we look at the multiple image system B1600+434, recently identified as being lensed by a spiral galaxy. We find that including the disk component one can understand the fairly large image separation as being due to the inclination of a typical spiral, rather than the presence of a very massive halo. The fairly low magnification ratio can also be readily understood if the disk is included. We also discuss how such lensed systems might allow one to constrain parameters of spiral galaxies such as a disk-to-halo mass ratio, and disk mass scale length. Another example we consider is the quasar multiple-lensing cross section, which we find can increase many-fold at high inclination for a typical spiral. Finally, we discuss the changes in the gravitational lensing effects on damped Lyman alpha systems (DLAS) when disk lensing is included.

Ariyeh Maller; Ricardo Flores; Joel Primack

1997-01-16T23:59:59.000Z

14

Optimization of solar flat collector inclination  

Science Journals Connector (OSTI)

Solar collectors need to be inclined at the optimum angle to maximize the receiving energy. In spite of many theoretical and experimental investigations on optimization of solar collector inclination, there is an inconsistency in presented results. In this paper, solar global radiation on a horizontal surface was estimated using a mathematical model and the results were compared with the recorded data from the Zahedan city meteorological station. Total received solar energy by a flat inclined collector was determined in a certain day, and searching for the angle which has the maximum incident energy was the general procedure in determination of daily optimum tilt angle. In case of operational limitation for daily tilt adjustment, this procedure is repeated for other specific period of time and monthly, seasonal, semi-annual and annual optimum tilt angles were determined. A MATLAB-based code is used to calculate the daily optimum tilt angle. The results were in good agreement with the obtained data of a new constructed device. Finally, in the case of stationary devices, some recommendations were presented with respect to their typical application.

Hamid Moghadam; Farshad Farshchi Tabrizi; Ashkan Zolfaghari Sharak

2011-01-01T23:59:59.000Z

15

HIGH-INCLINATION ATENS ARE INDEED RARE  

SciTech Connect (OSTI)

A recent publication by the Near-Earth Object (NEOWISE) team (Mainzer et al.) using data from the Wide-field Infrared Survey Explorer compared the spacecraft's detected near-Earth asteroid subpopulation orbital element distributions to those expected from the Bottke et al. NEO orbital model. They found a discrepency between the detected and expected Aten inclination distribution. We show that the more recent NEO orbital distribution model by Greenstreet et al., when biased using the NEOWISE detection biases, gives a better match to the NEOWISE detections for the Aten (a < 1.0 AU, Q > 0.983 AU) population in semimajor axis (a), eccentricity (e), and inclination (i) than the Bottke et al. model. A Kolmogorov-Smirnov test gives the probability of drawing the NEOWISE detections from the biased Bottke et al. model as not rejectable (at >99% confidence) for the Aten semimajor axis distribution, but is rejectable at such a high level of confidence for the Aten eccentricity and inclination distributions. For all three orbital element distributions, the biased Greenstreet et al. model provides an acceptable match to the NEOWISE Aten detections. The deficiency in the previous model is likely due to the numerical integration's accuracy having broken down in the high-speed regime for planetary encounters near the Sun, an effect which the newer model does not suffer, and thus likely is the model of preference for perihelia q < 1.0 AU.

Greenstreet, S.; Gladman, B., E-mail: sarahg@phas.ubc.ca [Department of Physics and Astronomy, University of British Columbia, 6224 Agricultural Road, Vancouver, British Columbia V6T 1Z1 (Canada)

2013-04-10T23:59:59.000Z

16

Test Automation Ant JUnit Test Automation  

E-Print Network [OSTI]

Test Automation Ant JUnit Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2012 Mousavi: Test Automation #12;Test Automation Ant JUnit Outline Test Automation Ant JUnit Mousavi: Test Automation #12;Test Automation Ant JUnit Why? Challenges of Manual Testing

Mousavi, Mohammad

17

Automation i Distributionsnt; Distribution automation.  

E-Print Network [OSTI]

?? As a part of Gteborg Energis work towards a smarter electric grid, the company has chosen to investigate the possibilities of automation in their (more)

Mrd, Mathias

2012-01-01T23:59:59.000Z

18

A unified model for slug flow in upward inclined pipes  

SciTech Connect (OSTI)

The effect of pipe inclination on upward two-phase slug flow characteristics has been studied both experimentally and theoretically. Experimental data were acquired for the entire range of inclination angles, from horizontal to vertical. New correlations were developed for slug length and liquid holdup in the slug body as a function of inclination angle. A unified model has been developed for the prediction of slug flow behavior in upward inclined pipes. Reasonable agreement is observed between the pressure drop predicted by the model and the experimental data.

Felizola, H.; Shoham, O. [Univ. of Tulsa, OK (United States). Petroleum Engineering Dept.

1995-03-01T23:59:59.000Z

19

Highway Electrification And Automation  

E-Print Network [OSTI]

Electrification and Automation Technologies - RegionalHighway Electrification and Automation Steven E. Shladovertechnology of highway automation, as well as its belief

Shladover, Steven E.

1992-01-01T23:59:59.000Z

20

Chinese Oil Demand: Steep Incline Ahead  

U.S. Energy Information Administration (EIA) Indexed Site

Chinese Oil Demand: Chinese Oil Demand: Steep Incline Ahead Malcolm Shealy Alacritas, Inc. April 7, 2008 Oil Demand: China, India, Japan, South Korea 0 2 4 6 8 1995 2000 2005 2010 Million Barrels/Day China South Korea Japan India IEA China Oil Forecast 0 2 4 6 8 10 12 14 16 18 2000 2005 2010 2015 2020 2025 2030 Million Barrels/Day WEO 2007 16.3 mbd 12.7 mbd IEA China Oil Forecasts 0 2 4 6 8 10 12 14 16 18 2000 2005 2010 2015 2020 2025 2030 Million Barrels/Day WEO 2007 WEO 2006 WEO 2004 WEO 2002 Vehicle Sales in China 0 2 4 6 8 10 1990 1995 2000 2005 2010 Million Vehicles/Year Vehicle Registrations in China 0 10 20 30 40 50 1990 1995 2000 2005 2010 Million Vehicles/Year Vehicle Density vs GDP per Capita 0 20 40 60 80 100 120 140 160 180 200 0 4,000 8,000 12,000 16,000 GDP per capita, 2005$ PPP Vehicles per thousand people Taiwan South Korea China Vehicle Density vs GDP per Capita

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

E-Print Network 3.0 - ambitions political inclinations Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ambitions political inclinations Search Powered by Explorit Topic List Advanced Search Sample search results for: ambitions political inclinations Page: << < 1 2 3 4 5 > >> 1 The...

22

3-D Thermoconvection in an Anisotropic Inclined Sedimentary Layer  

Science Journals Connector (OSTI)

......3-D thermoconvection in an anisotropic inclined sedimentary layer...basin generally present an anisotropic structure with maximum permeability...We extend these results to anisotropic media, with anisotropies...are usually embedded in a shale matrix (Busch 1974; Pettijohn......

Anne Ormond; Pierre Genthon

1993-02-01T23:59:59.000Z

23

Average East-West Inclinations of Surface Magnetic Field Lines  

Science Journals Connector (OSTI)

The east-west component of the inclination to the vertical of magnetic field lines of fields measured at the photospheric level is calculated ... and as a function of latitude. These fields represent mostly non-s...

Robert F. Howard

1994-01-01T23:59:59.000Z

24

Oil spill fluorosensing lidar for inclined onshore or shipboard operation  

Science Journals Connector (OSTI)

An oil spill detection fluorosensing lidar for onshore or shipboard operation is described. Some difficulties for its operation arise from the inclined path of rays. This is due to...

Karpicz, Renata; Dementjev, Andrej; Kuprionis, Zenonas; Pakalnis, Saulius; Westphal, Rainer; Reuter, Rainer; Gulbinas, Vidmantas

2006-01-01T23:59:59.000Z

25

Automation Performance Index.  

E-Print Network [OSTI]

??Automation is intended to improve overall building performance. Building Automation Systems (BAS) are attractive and popular due to their promise of increased operational effectiveness. BAS (more)

Makarechi, Shariar

2006-01-01T23:59:59.000Z

26

Views on Automation  

Science Journals Connector (OSTI)

Views on Automation ... Industrial managements, he feels, must allay workers' fears by showing how they can take pride in the greater accomplishment of automated plants. ...

1957-07-29T23:59:59.000Z

27

Two phase pressure drop in inclined and vertical pipes  

E-Print Network [OSTI]

A method of calculating the pressure drop in inclined and vertical oil-gas wells is proposed. The data used to establish the method is from a variety of sources but is largely from air and water flowing in systems close ...

Griffith, P.

1973-01-01T23:59:59.000Z

28

Home Automation System; Automation i hemmet.  

E-Print Network [OSTI]

?? This project revolves around creating a home automation system prototype with the main focus being the ability to lock/unlock a door through the internet. (more)

Ruwaida,, Bassam

2013-01-01T23:59:59.000Z

29

Inclined fluidized bed system for drying fine coal  

DOE Patents [OSTI]

Coal is processed in an inclined fluidized bed dryer operated in a plug-flow manner with zonal temperature and composition control, and an inert fluidizing gas, such as carbon dioxide or combustion gas. Recycled carbon dioxide, which is used for drying, pyrolysis, quenching, and cooling, is produced by partial decarboxylation of the coal. The coal is heated sufficiently to mobilize coal tar by further pyrolysis, which seals micropores upon quenching. Further cooling with carbon dioxide enhances stabilization.

Cha, Chang Y. (Golden, CO); Merriam, Norman W. (Laramie, WY); Boysen, John E. (Laramie, WY)

1992-02-11T23:59:59.000Z

30

Heliospheric current sheet inclinations at Venus and Earth G. Ma, K. Marubashi, and T. Maruyama  

E-Print Network [OSTI]

that the heliospheric current sheet inclination tends to be maintained during propagation of the solar wind from 0.72 AUHeliospheric current sheet inclinations at Venus and Earth G. Ma, K. Marubashi, and T. Maruyama / Revised: 16 September 1998 / Accepted: 22 October 1998 Abstract. We investigate the inclinations

Paris-Sud XI, Université de

31

Automation of organic elemental analysis  

Science Journals Connector (OSTI)

Automation of organic elemental analysis ... Describes the development and design of an apparatus for automated organic elemental analysis. ...

Velmer B. Fish

1969-01-01T23:59:59.000Z

32

Automation in biological crystallization  

Science Journals Connector (OSTI)

Automation is the response to overcoming the crystallization bottleneck in biological crystallography. This review provides a summary of the current methods and technologies applied in automated platforms for the setup of initial and follow-up crystallization experiments.

Shaw Stewart, P.

2014-05-28T23:59:59.000Z

33

Digital Control for Automation  

Science Journals Connector (OSTI)

GREATER YIELDS OF BETTER QUALITY PRODUCTS at reduced costs: That's one way to look at automations goal. And among instruments for automation are data reduction systems (others: continuous process analyzers, computer elements, and control mechanisms). ...

1956-04-02T23:59:59.000Z

34

AUTOMATION: Hints from OCAW  

Science Journals Connector (OSTI)

AUTOMATION: Hints from OCAW ... Labor and management need more, not less, collective bargaining in automated industries, he told a Houston, Tex., meeting of the Petro Group of the South Texas Section of the American Institute of Chemical Engineers. ...

1969-06-30T23:59:59.000Z

35

Theorie des langages Automates finis  

E-Print Network [OSTI]

Th´eorie des langages Automates finis Elise Bonzon http://web.mi.parisdescartes.fr/ bonzon/ elise.bonzon@parisdescartes.fr 1 / 51 Th´eorie des langages #12;Automates finis Automates finis Introduction Formalisation Repr´erations sur les automates Automates finis et langages 2 / 51 Th´eorie des langages #12;Automates finis

Bonzon, Elise

36

Multiplex automated genome engineering  

DOE Patents [OSTI]

The present invention relates to automated methods of introducing multiple nucleic acid sequences into one or more target cells.

Church, George M; Wang, Harris H; Isaacs, Farren J

2013-10-29T23:59:59.000Z

37

Congress Likes Automation  

Science Journals Connector (OSTI)

Congress Likes Automation ... Industry is generally aware of its responsibilities to worker replaced by automation, Congressional group concludes after broad study ... No NEW LEGISLATION or legislative changes are required to keep pace with the impact of automation on the national economy, concludes Rep. Wright Patman (D.-Tex.). ...

1955-11-07T23:59:59.000Z

38

Joint Genome Institute's Automation Approach and History  

E-Print Network [OSTI]

Joint Genome Institutes Automation Approach and Historythroughput environment; automation does not necessarilyissues Islands of Automation modular instruments with

Roberts, Simon

2006-01-01T23:59:59.000Z

39

Process Development Automation:? An Evolutionary Approach  

Science Journals Connector (OSTI)

Process Development Automation:? An Evolutionary Approach ... In contrast, standard laboratory equipment already contains some automated capabilities but is normally unused in our automation strategies. ... What Can Be Automated? ...

Mike Pollard

2001-04-27T23:59:59.000Z

40

Do liquid drops roll or slide on inclined surfaces?  

E-Print Network [OSTI]

We study the motion of a two-dimensional droplet on an inclined surface, under the action of gravity, using a diffuse interface model which allows for arbitrary equilibrium contact angles. The kinematics of motion is analysed by decomposing the gradient of the velocity inside the droplet into a shear and a residual flow. This decomposition helps in distinguishing sliding versus rolling motion of the drop. Our detailed study confirms intuition, in that rolling motion dominates as the droplet shape approaches a circle, and the viscosity contrast between the droplet and the ambient fluid becomes large. As a consequence of kinematics, the amount of rotation in a general droplet shape follows a universal curve characterised by geometry, and independent of Bond number, surface inclination and equilibrium contact angle, but determined by the slip length and viscosity contrast. Our results open the way towards a rational design of droplet-surface properties, both when rolling motion is desirable (as in self-cleaning hydrophobic droplets) or when it must be prevented (as in insecticide sprays on leaves).

Sumesh P. Thampi; Ronojoy Adhikari; Rama Govindarajan

2014-05-08T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Measuring the orbital inclination of Z Andromedae from Rayleigh scattering  

E-Print Network [OSTI]

The orbital inclination of the symbiotic prototype Z And has not been established yet. At present, two very different values are considered, i ~ 44 degrees and i >~ 73 degrees. The correct value of i is a key parameter in, for example, modeling the highly-collimated jets of Z And. The aim of this paper is to measure the orbital inclination of Z And. First, we derive the hydrogen column density (nH), which causes the Rayleigh scattering of the far-UV spectrum at the orbital phase phi = 0.961 plus/minus 0.018. Second, we calculate nH as a function of i and phi for the ionization structure during the quiescent phase. Third, we compare the nH(i,phi) models with the observed value. The most probable shaping of the HI/HII boundaries and the uncertainties in the orbital phase limit i of Z And to 59 -2/+3 degrees. Systematic errors given by using different wind velocity laws can increase i up to ~74 degrees. A high value of i is supported independently by the orbitally related variation in the far-UV continuum and th...

Skopal, A

2012-01-01T23:59:59.000Z

42

An Automation System for Optimizing a Supply Chain Network Design under the Influence of Demand Uncertainty  

E-Print Network [OSTI]

Automation . . . . . . . . . . . . . . . . . . . . . . iii 3Automation . . . . . . . . . . . . . . . . . . . . . . 5Dashboard/Cockpit Automation . . . . . . . . . . . . .

Polany, Rany

2012-01-01T23:59:59.000Z

43

CIMplementation: Evaluating Manufacturing Automation  

E-Print Network [OSTI]

in the manufacturing organization if CIMplementation~* is to succeed. 1.0 INTRODUCTION There is much discussion today about Com puter Integrated Manufacturing (CIM). Automation tools like Computer Aided Design (CAD) systems, robots, automated material handling...~ Pressing the frontier of technology in one's own manufactur ing facility will not be without its pitfalls. Second, while automation engineers may be able to piece together the technological pieces of a CIM system, they cannot and do not evaluate...

Krakauer, J.

44

IPv6 Home Automation.  

E-Print Network [OSTI]

?? Home automation is the systematic controlling and monitoring of everyday home devices such as lighting, heating, window blinds and appliances (both white goods and (more)

Hdn, Thor

2009-01-01T23:59:59.000Z

45

Home Automation Using Elvin.  

E-Print Network [OSTI]

?? Home automation systems of today tend to be external solutions to an existing product that enable rather complex and expensive communications equipment to be (more)

Malm, Anders

2005-01-01T23:59:59.000Z

46

Vehicle highway automation.  

E-Print Network [OSTI]

??Vehicle Highway Automation has been studied for several years but a practical system has not been possible because of technology limitations. New advances in sensing (more)

Challa, Dinesh Kumar

2009-01-01T23:59:59.000Z

47

Anisotropic Porochemoelectroelastic Solution for Inclined Wellbores with Applications to Operations in Unconventional Shale Plays  

Science Journals Connector (OSTI)

In this work, the porochemoelectroelastic theory is applied to analyze instability problems of an inclined wellbore drilled in the laminated and charged saturated chemically active shale formations. Numerical ...

Minh H. Tran; Younane N. Abousleiman

2013-01-01T23:59:59.000Z

48

On the 'Scattered' Inclinations in the Kuiper Belt  

E-Print Network [OSTI]

This paper shows that the inclinations of bodies captured into mean motion resonances in the Kuiper belt have remained very nearly unchanged, being only slightly increased from initial lower values by migration and/or by long-term planetary perturbations. Thus the observed maximum as high as ~ 30 deg of the i's of bodies in resonance must reflect either a broad initial range at least to that level for capturable bodies or an elevating process possibly exemplified by the sweeping of secular resonances. We have obtained capture probabilities for 2 well-populated resonances, showing reduced but finite values for i's up to 35 deg. Whatever led to the present distribution must have produced increases in i for some, but not for all, resonant bodies in the belt.

Franklin, Fred

2015-01-01T23:59:59.000Z

49

Laboratory automation-A case history  

Science Journals Connector (OSTI)

Laboratory automation-A case history ... This article describes an automated Raman spectrometer. ...

Bernard J. Bulkin; Edward H. Cole; Arthur Noguerola

1974-01-01T23:59:59.000Z

50

Automated Demand Response and Commissioning  

E-Print Network [OSTI]

Fully-Automated Demand Response Test in Large Facilities14in DR systems. Demand Response using HVAC in Commercialof Fully Automated Demand Response in Large Facilities

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-01-01T23:59:59.000Z

51

Autonomic Product Development Process Automation.  

E-Print Network [OSTI]

??Market globalization and mass customization requirements are forcing companies towards automation of their product development processes. Many task-specific software solutions provide localized automation. Coordinating these (more)

Daley, John E.

2007-01-01T23:59:59.000Z

52

Automation Creates New Managers  

Science Journals Connector (OSTI)

AUTOMATION will bring about new and broader patterns in the use of labor and creation of a large group of managers of a new type, says E. W. Engstrom, senior executive vice president of the Radio Corporation of America. With automation, there will no ...

1955-12-12T23:59:59.000Z

53

Automated analysis of eclipsing binary lightcurves. I. EBAS -- a new Eclipsing Binary Automated Solver with EBOP  

E-Print Network [OSTI]

We present a new algorithm -- Eclipsing Binary Automated Solver (EBAS), to analyse lightcurves of eclipsing binaries. The algorithm is designed to analyse large numbers of lightcurves, and is therefore based on the relatively fast EBOP code. To facilitate the search for the best solution, EBAS uses two parameter transformations. Instead of the radii of the two stellar components, EBAS uses the sum of radii and their ratio, while the inclination is transformed into the impact parameter. To replace human visual assessment, we introduce a new 'alarm' goodness-of-fit statistic that takes into account correlation between neighbouring residuals. We perform extensive tests and simulations that show that our algorithm converges well, finds a good set of parameters and provides reasonable error estimation.

Omer Tamuz; Tsevi Mazeh; Pierre North

2006-01-10T23:59:59.000Z

54

Characterization of the effect of Froude number on surface waves and heat transfer in inclined turbulent  

E-Print Network [OSTI]

Characterization of the effect of Froude number on surface waves and heat transfer in inclined describes wave/heat transfer phenomena in inclined turbulent open surface water flows. The experiments were. These changes lead to a heat transfer improvement, enough to double the heat transfer coefficient

Abdou, Mohamed

55

Reynolds Number Invariance of the Structure Inclination Angle in Wall Turbulence Ivan Marusic*  

E-Print Network [OSTI]

Reynolds Number Invariance of the Structure Inclination Angle in Wall Turbulence Ivan Marusic using hot-film and hot-wire anemometry in a wind tunnel facility, and sonic anemometers and a purpose has not been available before. Structure inclination angles are inferred from the cross correlation

Marusic, Ivan

56

Cognitive Engineering Automation and Human  

E-Print Network [OSTI]

· Home automation · Robotics · Unmanned vehicles (UAVs and UGVs) · Drug design/Molecular geneticsCognitive Engineering PSYC 530 Automation and Human Performance Raja Parasuraman #12;Overview Automation-Related Accidents Levels and Stages of Automation Information Acquisition and Analysis Decision

Parasuraman, Raja

57

Automation of Feynman Diagram Evaluation  

E-Print Network [OSTI]

A C-program DIANA (DIagram ANAlyser) for the automation of Feynman diagram evaluations is presented.

M. Tentyukov; J. Fleischer

1998-02-04T23:59:59.000Z

58

Shielded cells transfer automation  

SciTech Connect (OSTI)

Nuclear waste from shielded cells is removed, packaged, and transferred manually in many nuclear facilities. Radiation exposure is absorbed by operators during these operations and limited only through procedural controls. Technological advances in automation using robotics have allowed a production waste removal operation to be automated to reduce radiation exposure. The robotic system bags waste containers out of glove box and transfers them to a shielded container. Operators control the system outside the system work area via television cameras. 9 figures.

Fisher, J J

1984-01-01T23:59:59.000Z

59

Automated Lattice Perturbation Theory  

SciTech Connect (OSTI)

I review recent developments in automated lattice perturbation theory. Starting with an overview of lattice perturbation theory, I focus on the three automation packages currently "on the market": HiPPy/HPsrc, Pastor and PhySyCAl. I highlight some recent applications of these methods, particularly in B physics. In the final section I briefly discuss the related, but distinct, approach of numerical stochastic perturbation theory.

Monahan, Christopher

2014-11-01T23:59:59.000Z

60

Home Network Technologies and Automating Demand Response  

E-Print Network [OSTI]

potential role of home automation networks in implementinghow existing and future home automation systems may providehome networks" and "home automation" are frequently used

McParland, Charles

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Development of Building Automation and Control Systems  

E-Print Network [OSTI]

A design flow for building automation and control systems,Development of Building Automation and Control Systems Yangdesign of the build- ing automation system (including the

Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

2012-01-01T23:59:59.000Z

62

A Spectrophotometric Method to Determine the Inclination of Class I Objects  

E-Print Network [OSTI]

A new method which enables us to estimate the inclination of Class I young stellar objects is proposed. Since Class I objects are not spherically symmetric, it is likely that the observed feature is sensitive to the inclination of the system. Thus, we construct a protostar model by carefully treating two-dimensional (2D) radiative transfer and radiative equilibrium. We show from the present 2D numerical simulations that the emergent luminosity L_SED,which is the frequency integration of spectral energy distribution (SED), depends strongly on the inclination of the system i, whereas the peak flux is insensitive to i. Based on this result, we introduce a novel indicator f_L, which is the ratio of L_SED to the peak flux, as a good measure for the inclination. By using f_L, we can determine the inclination regardless of the other physical parameters. The inclination would be determined by f_L within the accuracy of +- 5 degree, if the opening angle of bipolar outflows is specified by any other procedure. Since this spectrophotometric method is easier than a geometrical method or a full SED fitting method, this method could be a powerful tool to investigate the feature of protostars statistically with observational data which will be provided by future missions, such as SIRTF, ASTRO-F, and ALMA.

T. Nakazato; T. Nakamoto; M. Umemura

2002-10-11T23:59:59.000Z

63

Honeywell Demonstrates Automated Demand Response Benefits for...  

Broader source: Energy.gov (indexed) [DOE]

Honeywell Demonstrates Automated Demand Response Benefits for Utility, Commercial, and Industrial Customers Honeywell Demonstrates Automated Demand Response Benefits for Utility,...

64

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS  

E-Print Network [OSTI]

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS: 2006 PROGRAM DESCRIPTION AND RESULTS APPENDICES.................................................................................... 5 B.2. DR Automation Server User Guide

65

Development of Building Automation and Control Systems  

E-Print Network [OSTI]

Johnson Controls, 70 in Automated Logic EIKON language, 42systems developed by Automated Logic. Similarly as shown in

Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

2012-01-01T23:59:59.000Z

66

HIGHLY AUTOMATED MACROMOLECULAR  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AUTOMATED MACROMOLECULAR AUTOMATED MACROMOLECULAR CRYSTALLOGRAPHY BEAMLINE (AMX) Group Leader: Dieter Schneider Proposal Team: M. Allaire 1 , L. Berman 1 , M. Chance 2 , W. Hendrickson 3 , A. Héroux 1 , J. Jakoncic 1 , A. Orville 1 , H. Robinson 1 , D. Schneider 1 , W. Shi 2 , A. Soares 1 , V. Stojanoff 1 , R. Sweet 1 1 Brookhaven National Laboratory, 2 Case Western Reserve University, 3 Columbia University MISSION APPLICATIONS AND CAPABILITIES ADDITIONAL INFORMATION * AMX at NSLS-II will provide structural biologists with ready access to an advanced macromolecular crystallography (MX) beamline for the elucidation of structure and function of macromolecular complexes. * Its high flux, tunable energy, and natively small focal spot will make it a crystallographer's preferred beamline. * Its high degree of automation will provide a high throughput

67

Automation Status | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Automation Status Automation Status Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011. mfg2011plenarysperrick.pdf More...

68

Automation on the laboratory bench  

Science Journals Connector (OSTI)

Automation on the laboratory bench ... In designing an automation kit the authors attempted to give chemistry a system which is versatile and easy to apply in taking over the boring and difficult task of controlling parameters manually. ...

M. Legrand; A. Foucard

1978-01-01T23:59:59.000Z

69

Automation: Congress' Next Probe  

Science Journals Connector (OSTI)

THE stage is being set for a Congressional investigation of the trend toward automation in industry. From all indications, this could become one of the hottest subjects in labor-management relations during the coming year.Formal hearings have been ...

1955-08-29T23:59:59.000Z

70

THE PHOTOMETRIC AND KINEMATIC STRUCTURE OF FACE-ON DISK GALAXIES. III. KINEMATIC INCLINATIONS FROM H{alpha} VELOCITY FIELDS  

SciTech Connect (OSTI)

Using the integral field unit DensePak on the WIYN 3.5 m telescope we have obtained H{alpha} velocity fields of 39 nearly face-on disks at echelle resolutions. High-quality, uniform kinematic data and a new modeling technique enabled us to derive accurate and precise kinematic inclinations with mean i{sub kin} = 23 Degree-Sign for 90% of these galaxies. Modeling the kinematic data as single, inclined disks in circular rotation improves upon the traditional tilted-ring method. We measure kinematic inclinations with a precision in sin i of 25% at 20 Degree-Sign and 6% at 30 Degree-Sign . Kinematic inclinations are consistent with photometric and inverse Tully-Fisher inclinations when the sample is culled of galaxies with kinematic asymmetries, for which we give two specific prescriptions. Kinematic inclinations can therefore be used in statistical ''face-on'' Tully-Fisher studies. A weighted combination of multiple, independent inclination measurements yield the most precise and accurate inclination. Combining inverse Tully-Fisher inclinations with kinematic inclinations yields joint probability inclinations with a precision in sin i of 10% at 15 Degree-Sign and 5% at 30 Degree-Sign . This level of precision makes accurate mass decompositions of galaxies possible even at low inclination. We find scaling relations between rotation speed and disk-scale length identical to results from more inclined samples. We also observe the trend of more steeply rising rotation curves with increased rotation speed and light concentration. This trend appears to be uncorrelated with disk surface brightness.

Andersen, David R. [NRC Herzberg Institute of Astrophysics, 5071 W Saanich Road, Victoria, BC V9E 2E7 (Canada); Bershady, Matthew A., E-mail: david.andersen@nrc-cnrc.gc.ca, E-mail: mab@astro.wisc.edu [Department of Astronomy, University of Wisconsin, 475 N Charter Street, Madison, WI 53706 (United States)

2013-05-01T23:59:59.000Z

71

Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response  

E-Print Network [OSTI]

ProtocolforBuildingAutomationandControl Networks. ProtocolforBuildingAutomationandControl Networks,DemandResponseAutomationServer DemandResponseResearch

Kiliccote, Sila

2011-01-01T23:59:59.000Z

72

An experimental investigation of an inclined passive wall solar chimney for natural ventilation  

Science Journals Connector (OSTI)

Abstract Ongoing investigations into solar chimney development have resulted in constantly evolving new designs. In this study, experiments are carried out with an inclined passive wall solar chimney (IPWSC) model with a uniform heat flux on the active (absorptive) wall. The effectiveness of this design has been examined for the heat flux range of 100W/m2500W/m2 with a fixed base air gap width of 0.1m and inclination angles of the passive wall in the range of 06 degrees. The experimental results show that the inclination angle of the passive wall has no significant effect on the temperature distribution across the air gap width and along the chimney height. On the other hand, the averaged air flow velocity across the air gap width is strongly affected by the inclination angle. The experimental results also show that the IPWSC with 0.7m absorber height and 0.1m air gap width at an inclination angle of 6 and input heat flux of 500W/m2 can produce sufficient ventilation for a 27m3 room based on ASHREA standards. Further, the present experimental results show that the IPWSC design can significantly improve the ventilation performance of a solar chimney in comparison to the conventional chimney design with vertical passive wall configuration. The experimental results are supported by flow visualization experiments and are consistent with scaling predictions.

Rakesh Khanal; Chengwang Lei

2014-01-01T23:59:59.000Z

73

Numerical investigation of transient flow-mode transition of laminar natural convection in an inclined enclosure  

SciTech Connect (OSTI)

The present work is concerned with a numerical investigation of transient laminar natural convection and the associated flow-mode transition in a two-dimensional rectangular enclosure. Navier-Stokes/Boussinesq equations for fluid flow and energy balance are solved by using the SIMPLE-C algorithm. Air of Pr = 0.71 in a differentially heated enclose of length-to-height aspect ratio As = 4 and at Ra = 5,000 is chosen as the flow model to examine the influences of the inclination. Calculations of time accuracy are performed to investigate the transient procedure of the flow-mode transition with increasing or decreasing inclination. The present results reveal that, at some critical situations, natural convection in inclined enclosures is very sensitive to the change in tilt angle, and the associated heat transfer rates are closely related to the correspondent cellular flow patterns.

Tzeng, P.Y.; Soong, C.Y.; Sheu, T.S. [Chung Cheng Inst. of Tech., Taoyuan (Taiwan, Province of China). Dept. of Aeronautical Engineering

1997-02-07T23:59:59.000Z

74

Automated gas chromatography  

DOE Patents [OSTI]

An apparatus and process for the continuous, near real-time monitoring of low-level concentrations of organic compounds in a liquid, and, more particularly, a water stream. A small liquid volume of flow from a liquid process stream containing organic compounds is diverted by an automated process to a heated vaporization capillary where the liquid volume is vaporized to a gas that flows to an automated gas chromatograph separation column to chromatographically separate the organic compounds. Organic compounds are detected and the information transmitted to a control system for use in process control. Concentrations of organic compounds less than one part per million are detected in less than one minute. 7 figs.

Mowry, C.D.; Blair, D.S.; Rodacy, P.J.; Reber, S.D.

1999-07-13T23:59:59.000Z

75

Automated Job Hazards Analysis  

Broader source: Energy.gov [DOE]

AJHA Program - The Automated Job Hazard Analysis (AJHA) computer program is part of an enhanced work planning process employed at the Department of Energy's Hanford worksite. The AJHA system is routinely used to performed evaluations for medium and high risk work, and in the development of corrective maintenance work packages at the site. The tool is designed to ensure that workers are fully involved in identifying the hazards, requirements, and controls associated with tasks.

76

Ion Feedback Suppression Using Inclined MCP Holes in a _Single-MCP+Micromegas+Pads_ Detector  

SciTech Connect (OSTI)

We show that the ion backflow to photocathode can be completely suppressed if one uses inclined MCP holes in a presence of magnetic field. The inclined hole angles are chosen to be aligned with the Lorentz electron angle allowing the electron transmission and amplification, while positive ions, traveling along a different angle, are caught on the MCP hole walls. The detector under investigation is a new gaseous detector structure based on a tandem of two parts, a single MCP (Microchannel) plate, a Micromegas with pad readout. We are aiming to develop a gaseous photon detector with the Bialkali photocathode, however, one could use some ideas in the paper for other types of detectors.

Va'vra, J.; /SLAC; Sumiyoshi, T.; /Tokyo Metropolitan U.

2005-09-30T23:59:59.000Z

77

Fiber optic inclination detector system having a weighted sphere with reference points  

DOE Patents [OSTI]

A fiber optic inclination detector system for determining the angular displacement of an object from a reference surface includes a simple mechanical transducer which requires a minimum number of parts and no electrical components. The system employs a single light beam which is split into two light beams and provided to the transducer. Each light beam is amplitude modulated upon reflecting off the transducer to detect inclination. The power values associated with each of the reflected light beams are converted by a pair of photodetectors into voltage signals, and a microprocessor manipulates the voltage signals to provide a measure of the angular displacement between the object and the reference surface.

Cwalinski, Jeffrey P. (Ballston Lake, NY)

1995-01-01T23:59:59.000Z

78

TJ Automation | Open Energy Information  

Open Energy Info (EERE)

TJ Automation TJ Automation Jump to: navigation, search Name TJ Automation Facility TJ Automation Sector Wind energy Facility Type Small Scale Wind Facility Status In Service Owner TJ Automation Energy Purchaser TJ Automation Location Archbold OH Coordinates 41.45823855°, -84.30666804° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.45823855,"lon":-84.30666804,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

79

Report blasts Patent Office automation  

Science Journals Connector (OSTI)

Report blasts Patent Office automation ... The Department of Commerce is moving quickly to implement a report highly critical of the Patent & Trademark Office's efforts to fully automate its patent search and retrieval operations. ... An Industry Review Panel found that the current automated patent system is over-designed and as a result needs a redundant communications network and redundant storage of all patent images at high resolution. ...

JANICE LONG

1988-05-30T23:59:59.000Z

80

Virtual Machine in Automation Projects.  

E-Print Network [OSTI]

?? Virtual machine, as an engineering tool, has recently been introduced into automation projects in Tetra Pak Processing System AB. The goal of this paper (more)

Xing, Xiaoyuan

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

AUTOMATED ~.JELDING -RESEARCH NEEDS T. H. Eagar  

E-Print Network [OSTI]

) ) ..... . '. AUTOMATED ~.JELDING - RESEARCH NEEDS T. H. Eagar Department of Naterials Science and Engineering Nassachusetts Institute of Technology Cambridge, Hassachusetts 02139 Increased use of automated is necessary in order to develop reliable automated welding techniques. #12;Introduction During the past decade

Eagar, Thomas W.

82

Automation improves personal effectiveness while reducing drudgery  

Science Journals Connector (OSTI)

Automation improves personal effectiveness while reducing drudgery ... "The term automation ," says one Department of Labor official with undisguised feeling, "is a hopeless semantic jungle." ... One industry man defines automation very loosely as any way of doing things better with machines. ...

1966-03-14T23:59:59.000Z

83

First Measurements of the Inclined Boron Layer Thermal-Neutron Detector for Reflectometry  

SciTech Connect (OSTI)

A prototype detector based on the inclined boron layer principle is introduced. For typical measurement conditions at the Liquids Reflectometer at the Spallation Neutron Source, its count rate capability is shown to be superior to that of the current detector by nearly two orders of magnitude.

Clonts, Lloyd G [ORNL; Crow, Lowell [ORNL; Van Vuure, Thorwald L [ORNL; Robertson, Lee [ORNL; Riedel, Richard A [ORNL; Richards, John D [ORNL; Cooper, Ronald G [ORNL; Remec, Igor [ORNL; Ankner, John Francis [ORNL; Browning, Jim [ORNL

2010-01-01T23:59:59.000Z

84

First Measurements of the Inclined Boron Layer Thermal-Neutron Detector for Reflectometry  

SciTech Connect (OSTI)

A prototype detector based on the inclined absorber layer principle is introduced. For the Liquids Reflectometer at the Spallation Neutron Source, it is shown to be a significant improvement over its current detector, which imposes an instantaneous count rate limitation of 50 kcps.

Van Vuure, Thorwald L [ORNL] [ORNL; Clonts, Lloyd G [ORNL] [ORNL; Crow, Lowell [ORNL] [ORNL; Cooper, Ronald G [ORNL] [ORNL; Richards, John D [ORNL] [ORNL; Riedel, Richard A [ORNL] [ORNL; Robertson, Lee [ORNL] [ORNL

2008-01-01T23:59:59.000Z

85

An experimental and numerical study of heat transfer off an inclined surface subject to an impinging airflow  

E-Print Network [OSTI]

An experimental and numerical study of heat transfer off an inclined surface subject in revised form 23 August 2001 Abstract Understanding the heat transfer interaction between an impinging jet and an inclined surface is of paramount practical significance. In this paper, the heat transfer process

Roy, Subrata

86

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network [OSTI]

Facility Technician) Automated Logic Corporation: Ivanembedded in the Targets Automated Logic Corporation (ALC)

Kiliccote, Sila

2010-01-01T23:59:59.000Z

87

Automated fiber pigtailing machine  

DOE Patents [OSTI]

The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

Strand, O.T.; Lowry, M.E.

1999-01-05T23:59:59.000Z

88

Chapter 11 - Industrial Automation  

Science Journals Connector (OSTI)

The industrial systems of the future are complex systems composed of vast numbers of devices interacting with each other and with enterprise systems. Modern technologies such as web services, service-oriented architectures (SOAs), the cloud, etc. make it possible for sophisticated infrastructures to emerge in future factories. We take a closer look at key visionary aspects that are expected to be introduced in the industrial automation domain in the years to come, and the pivotal role of M2M and IoT. Additionally, we investigate the impact on the collaboration of machines among themselves and with enterprise systems and their services.

Jan Hller; Vlasios Tsiatsis; Catherine Mulligan; Stamatis Karnouskos; Stefan Avesand; David Boyle

2014-01-01T23:59:59.000Z

89

Automating dipole subtraction  

E-Print Network [OSTI]

We report on automating the Catani-Seymour dipole subtraction which is a general procedure to treat infrared divergences in real emission processes at next-to-leading order in QCD. The automatization rests on three essential steps: the creation of the dipole terms, the calculation of the color linked squared Born matrix elements, and the evaluation of different helicity amplitudes. The routines have been tested for a number of complex processes, such as the real emission process gg --> t anti-t ggg.

K. Hasegawa; S. Moch; P. Uwer

2008-07-23T23:59:59.000Z

90

Installation and Commissioning Automated Demand Response Systems  

E-Print Network [OSTI]

their partnership in demand response automation research andand Techniques for Demand Response. LBNL Report 59975. Mayof Fully Automated Demand Response in Large Facilities.

Kiliccote, Sila; Global Energy Partners; Pacific Gas and Electric Company

2008-01-01T23:59:59.000Z

91

Home Network Technologies and Automating Demand Response  

E-Print Network [OSTI]

and Automating Demand Response Charles McParland, Lawrenceand Automating Demand Response Charles McParland, LBNLCommercial and Residential Demand Response Overview of the

McParland, Charles

2010-01-01T23:59:59.000Z

92

Automation in X-Ray Crystallography  

Science Journals Connector (OSTI)

Automation in X-Ray Crystallography ... But in the past few years, automation procedures have been applied to intrinsically superior experimental methods. ...

S.C. ABRAHAMS

1963-06-03T23:59:59.000Z

93

Understanding roi metrics for software test automation.  

E-Print Network [OSTI]

??Software test automation is widely accepted as an efficient software testing technique. However, automation has failed to deliver the expected productivity more often than not. (more)

Jayachandran, Naveen

2005-01-01T23:59:59.000Z

94

Honeywell modular automation system acceptance test report  

SciTech Connect (OSTI)

This document provides the results of the Acceptance Test Procedure for the Honeywell Modular Automation System.

Cunningham, L.T., Westinghouse Hanford

1996-06-14T23:59:59.000Z

95

Probability distribution function for inclinations of merging compact binaries detected by gravitational wave interferometers  

E-Print Network [OSTI]

We analytically discuss probability distribution function (PDF) for inclinations of merging compact binaries whose gravitational waves are coherently detected by a network of ground based interferometers. The PDF would be useful for studying prospects of (1) simultaneously detecting electromagnetic signals (such as gamma-ray-bursts) associated with binary mergers and (2) statistically constraining the related theoretical models from the actual observational data of multi-messenger astronomy. Our approach is similar to Schutz (2011), but we explicitly include the dependence of the polarization angles of the binaries, based on the concise formulation given in Cutler and Flanagan (1994). We find that the overall profiles of the PDFs are similar for any networks composed by the second generation detectors (Advanced-LIGO, Advanced-Virgo, KAGRA, LIGO-India). For example, 5.1% of detected binaries would have inclination angle less than 10 degree with at most 0.1% differences between the potential networks. A perturb...

Seto, Naoki

2014-01-01T23:59:59.000Z

96

Inclined monochromator for high heat-load synchrotron x-ray radiation  

DOE Patents [OSTI]

A double crystal monochromator is described including two identical, parallel crystals, each of which is cut such that the normal to the diffraction planes of interest makes an angle less than 90 degrees with the surface normal. Diffraction is symmetric, regardless of whether the crystals are symmetrically or asymmetrically cut, enabling operation of the monochromator with a fixed plane of diffraction. As a result of the inclination of the crystal surface, an incident beam has a footprint area which is elongated both vertically and horizontally when compared to that of the conventional monochromator, reducing the heat flux of the incident beam and enabling more efficient surface cooling. Because after inclination of the crystal only a fraction of thermal distortion lies in the diffraction plane, slope errors and the resultant misorientation of the diffracted beam are reduced. 11 figures.

Khounsary, A.M.

1994-02-15T23:59:59.000Z

97

The scour of cohesive soils by an inclined submerged water jet  

E-Print Network [OSTI]

into the channel reducing its navigable depth, and causes lateral retreat as a result of slope instability. Also, the study of cohesive incline scour can be applied to improving the efficiency of jet assisted draghead dredging as described by Herbich (12... efficient translation of the impinging jet to the wall jet reducing the center line nozmal pressure. Also, as predicted by Eg. 17 the kinetic energy of the jet decreased with increasing distance away from the orifice. Thus, the normal surface pressure...

Hedges, Joseph Delbert

2012-06-07T23:59:59.000Z

98

Development of an advanced process for drying fine coal in an inclined fluidized bed  

SciTech Connect (OSTI)

The objective of this research project was to demonstrate a technically feasible and economically viable process for drying and stabilizing high-moisture subbituminous coal. Controlled thermal drying of coal fines was achieved using the inclined fluidized-bed drying and stabilization process developed by the Western Research Institute. The project scope of work required completion of five tasks: (1) project planning, (2) characterization of two feed coals, (3) bench-scale inclined fluidized-bed drying studies, (4) product characterization and testing, and (5) technical and economic evaluation of the process. High moisture subbituminous coals from AMAX Eagle Butte mine located in the Powder River Basin of Wyoming and from Usibelli Coal Mine, Inc. in Healy, Alaska were tested in a 10-lb/hr bench-scale inclined fluidized-bed. Experimental results show that the dried coal contains less than 1.5% moisture and has a heating value over 11,500 Btu/lb. The coal fines entrainment can be kept below 15 wt % of the feed. The equilibrium moisture of dried coal was less than 50% of feed coal equilibrium moisture. 7 refs., 60 figs., 47 tabs.

Boysen, J.E.; Cha, C.Y.; Barbour, F.A.; Turner, T.F.; Kang, T.W.; Berggren, M.H.; Hogsett, R.F.; Jha, M.C.

1990-02-01T23:59:59.000Z

99

Automated Morphology Analysis of Nanoparticles  

E-Print Network [OSTI]

of this dissertation is to develop automated morphology analysis methods. Morphology analysis is comprised of three tasks: separate individual particles from an agglomerate of overlapping nano-objects (image segmentation); infer the particle's missing contours (shape...

Park, Chiwoo

2012-10-19T23:59:59.000Z

100

Aspects of automation mode confusion  

E-Print Network [OSTI]

Complex systems such as commercial aircraft are difficult for operators to manage. Designers, intending to simplify the interface between the operator and the system, have introduced automation to assist the operator. In ...

Wheeler, Paul H. (Paul Harrison)

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Technology modernization assessment flexible automation  

SciTech Connect (OSTI)

The objectives of this report are: to present technology assessment guidelines to be considered in conjunction with defense regulations before an automation project is developed to give examples showing how assessment guidelines may be applied to a current project to present several potential areas where automation might be applied successfully in the depot system. Depots perform primarily repair and remanufacturing operations, with limited small batch manufacturing runs. While certain activities (such as Management Information Systems and warehousing) are directly applicable to either environment, the majority of applications will require combining existing and emerging technologies in different ways, with the special needs of depot remanufacturing environment. Industry generally enjoys the ability to make revisions to its product lines seasonally, followed by batch runs of thousands or more. Depot batch runs are in the tens, at best the hundreds, of parts with a potential for large variation in product mix; reconfiguration may be required on a week-to-week basis. This need for a higher degree of flexibility suggests a higher level of operator interaction, and, in turn, control systems that go beyond the state of the art for less flexible automation and industry in general. This report investigates the benefits and barriers to automation and concludes that, while significant benefits do exist for automation, depots must be prepared to carefully investigate the technical feasibility of each opportunity and the life-cycle costs associated with implementation. Implementation is suggested in two ways: (1) develop an implementation plan for automation technologies based on results of small demonstration automation projects; (2) use phased implementation for both these and later stage automation projects to allow major technical and administrative risk issues to be addressed. 10 refs., 2 figs., 2 tabs. (JF)

Bennett, D.W.; Boyd, D.R.; Hansen, N.H.; Hansen, M.A.; Yount, J.A.

1990-12-01T23:59:59.000Z

102

The 'Problem' with Automation: Inappropriate Feedback and Interaction, not 'Over-Automation'  

Science Journals Connector (OSTI)

12 April 1990 research-article The 'Problem' with Automation: Inappropriate Feedback and Interaction, not 'Over-Automation' D. A. Norman As automation increasingly takes its place in industry, especially high risk industry...

1990-01-01T23:59:59.000Z

103

Type of automation failure: the effects on trust and reliance in automation.  

E-Print Network [OSTI]

??Past automation research has focused primarily on machine-related factors (e.g., automation reliability) and human-related factors (e.g., accountability). Other machine-related factors such as type of automation (more)

Johnson, Jason D.

2004-01-01T23:59:59.000Z

104

Participation through Automation: Fully Automated Critical Peak Pricing in Commercial Buildings  

E-Print Network [OSTI]

Figure 2. Demand Response Automation Server and BuildingII system to notify the Automation Server of an up comingoccurs day-ahead). 2. The Automation Server posts two pieces

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

105

Modeling multiphase flow for high viscosity liquids: a study of vertical/inclined zero net liquid flow  

E-Print Network [OSTI]

for higher viscosities. The trend suggests that the flow distribution coefficient, C[], varies with fluid viscosity and inclination angle, therefore affecting the liquid holdup in the pipe. A new model is proposed to take into account these factors and its...

Rodriguez, Jose Ramon

2012-06-07T23:59:59.000Z

106

Open Automated Demand Response for Small Commerical Buildings  

E-Print Network [OSTI]

ofFullyAutomatedDemand ResponseinLargeFacilities. FullyAutomatedDemandResponseTestsinLargeFacilities. OpenAutomated DemandResponseCommunicationStandards:

Dudley, June Han

2009-01-01T23:59:59.000Z

107

Scenarios for Consuming Standardized Automated Demand Response Signals  

E-Print Network [OSTI]

of Fully Automated Demand Response in Large Facilities.Fully Automated Demand Response Tests in Large Facilities.Interoperable Automated Demand Response Infrastructure.

Koch, Ed

2009-01-01T23:59:59.000Z

108

Automation World Features New White Paper on Wireless Security...  

Broader source: Energy.gov (indexed) [DOE]

Automation World Features New White Paper on Wireless Security Automation World Features New White Paper on Wireless Security The April 2009 issue of Automation World magazine...

109

Disciplined agility for process control & automation ; Disciplined agility for process control and automation .  

E-Print Network [OSTI]

??Process automation vendors must consider agility as a basis to gain a competitive edge in innovation. Process Automation systems can impact the operating cost of (more)

Tibazarwa, Augustine

2009-01-01T23:59:59.000Z

110

Trust in automated systems the effect of automation level on trust calibration .  

E-Print Network [OSTI]

??Automated systems perform functions that were previously executed by a human. When using automation, the role of the human changes from operator to supervisor. For (more)

Walliser, James C.

2011-01-01T23:59:59.000Z

111

Chapter 8 - Automation and Monitoring  

Science Journals Connector (OSTI)

This chapter begins with the topic of process automation which has the intent of making repetitive tasks more consistent, faster, and cheaper. As part of this discussion, we talk about how to determine if a process should be automated, how to document the process in preparation for automation, and how to perform the actual automation. A variety of scripting languages can be used to perform process automation and general best practices for scripting these processes is discussed as well as some thoughts on how to choose the right scripting language for the job. The second part of the chapter is all about monitoring of enterprise applications. Key performance indicators (KPIs) that give insight into the enterprise applications performance over time as well as determining when to alert the enterprise applications administrator to potential problems within the application are discussed. Alerts are another important topic associated with enterprise application monitoring that is discussed including how to properly tune alerts through the selection of appropriate KPIs, retry counts, and retry intervals.

Jeremy Faircloth

2014-01-01T23:59:59.000Z

112

An experimental study of the relationship between cuttings deposition and wellbore inclination in eccentric annuli  

E-Print Network [OSTI]

of Inclination on Cuttings Deposition (0 rpm data) 6 90 % Confidence Band on Regression Mean (0 rpm, AV = 2 ft/sec) 7 90 % Confidence Band on Regression Mean (0 rpm, AV = 3 ft/sec) 8 90 % Confidence Band on Regression Mean (0 rptn, AV = 4 ft/sec) 9 Effect... of Flow Rate on Cuttings Deposition (0 rpm data) 10 Mobil Data Comparison (0 rpm, AV = 2 ft/sec) 11 Mobil Data Comparison (0 rpm, AV = 3 ft/sec) 12 Mobil Data Comparison (0 rpm, AV = 4 ft/sec) 13 Iyoho Data Comparison (0 rpm data) page 26 44 45...

Colbert, John Wesley

2012-06-07T23:59:59.000Z

113

Determination of heat transfer and friction characteristics of an adapted inclined louvered fin  

SciTech Connect (OSTI)

An experimental study of a fin-and-tube heat exchanger was performed. To this end a test rig was constructed to measure the heat transfer rate on the air and waterside of the heat exchanger. A wide range of Reynolds numbers on the airside was investigated. The resulting data was used to determine the convective heat transfer correlation (expressed using the Colburn factor) and the friction factor on the airside. The fin type used in the heat exchanger of this research is an adaptation of the standard inclined louvered type. A thorough error analysis was performed, to validate the results. (author)

T'Joen, C.; Steeman, H.-J.; Willockx, A.; De Paepe, M. [Department of Flow, Heat and Combustion Mechanics, Ghent University-UGent, Sint-Pietersnieuwstraat 41, 9000 Gent (Belgium)

2006-03-01T23:59:59.000Z

114

Automated Demand Response Opportunities in Wastewater Treatment Facilities  

E-Print Network [OSTI]

Interoperable Automated Demand Response Infrastructure,study of automated demand response in wastewater treatmentopportunities for demand response control strategies in

Thompson, Lisa

2008-01-01T23:59:59.000Z

115

Automation in image cytometry : continuous HCS and kinetic image cytometry  

E-Print Network [OSTI]

OF CALIFORNIA, SAN DIEGO Automation in Image Cytometry:xiv Abstract of Dissertation Automation in Image Cytometry:

Charlot, David J.

2012-01-01T23:59:59.000Z

116

Automation of Fluorous Solid-Phase Extraction for Parallel Synthesis  

Science Journals Connector (OSTI)

Automation of Fluorous Solid-Phase Extraction for Parallel Synthesis ... Cartridge conditioning, sample loading, elution, and rinsing are automated. ...

Wei Zhang; Yimin Lu

2006-10-17T23:59:59.000Z

117

Open Automated Demand Response for Small Commerical Buildings  

E-Print Network [OSTI]

communications. Automated Logic Model Vendor LoadTypeoftheHVAC. Automated Logic Model Vendor LoadType

Dudley, June Han

2009-01-01T23:59:59.000Z

118

Process Control and Automation: The Bagrit Vision  

Science Journals Connector (OSTI)

Automation, broadly defined as the computer-assisted control of industrial processes, covers a wide spectrum of applications. Here we need to narrow the spectrum somewhat, so as to focus on the word automation as...

Emeritus Professor Simon Lavington

2011-01-01T23:59:59.000Z

119

Microcomputer Applications in Power System Substation Automation  

Science Journals Connector (OSTI)

The object of this chapter is to describe power system applications of microcomputers, particularly in the area of power substation automation.The major functions required in substation automation are reviewed an...

C. T. Nguyen; R. Grondin; A. St-Jacques

1983-01-01T23:59:59.000Z

120

Home Automation with ZigBee  

Science Journals Connector (OSTI)

This article discusses a topic of home automation, also called domotics, and provides an ... advantages provided by ZigBee wireless networking standard for home automation solutions. ZigBee protocol implementatio...

Maxim Osipov

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Disciplined agility for process control & automation  

E-Print Network [OSTI]

Process automation vendors must consider agility as a basis to gain a competitive edge in innovation. Process Automation systems can impact the operating cost of manufacturing equipment, the safe control of large quantities ...

Tibazarwa, Augustine

2009-01-01T23:59:59.000Z

122

Technical University of Denmark rsted DTU Automation  

E-Print Network [OSTI]

Technical University of Denmark ?rsted · DTU Automation Project: SICAM - SIngle Conversion stage based SICAM using an LC-network Petar Ljusev, MSc., Ph.D. student, ?rsted · DTU Automation e-mail: pl

123

Automated Operating Procedures for Transfer Limits  

E-Print Network [OSTI]

Automated Operating Procedures for Transfer Limits Final Project Report Power Systems Engineering · Illinois · Iowa State · Texas A&M · Washington State · Wisconsin Automated Operating Procedures

124

Automated Resoning in Modal Logics 0 (GENERAL PURPOSE) AUTOMATED REASONING IN MODAL LOGICS  

E-Print Network [OSTI]

Automated Resoning in Modal Logics 0 (GENERAL PURPOSE) AUTOMATED REASONING IN MODAL LOGICS BRANDEN FITELSON Department of Philosophy San Jos�e State University & Automated Reasoning Group.wisc.edu/fitelson BF @ AR @ MCS @ ANL & Philosophy @ SJSU May 16, 2002 Automated Resoning in Modal Logics 1

Fitelson, Branden

125

Automated Video-Based Fall Detection  

E-Print Network [OSTI]

home assistive monitoring uses technology such as sensors and cameras to aid live-alone aging persons, typically involving automation.

Edgcomb, Alex Daniel

2014-01-01T23:59:59.000Z

126

MAPPING EARTH ANALOGS FROM PHOTOMETRIC VARIABILITY: SPIN-ORBIT TOMOGRAPHY FOR PLANETS IN INCLINED ORBITS  

SciTech Connect (OSTI)

Aiming at obtaining detailed information on the surface environment of Earth analogs, Kawahara and Fujii proposed an inversion technique of annual scattered light curves named spin-orbit tomography (SOT), which enables us to sketch a two-dimensional albedo map from annual variation of the disk-integrated scattered light, and demonstrated the method with a planet in a face-on orbit. We extend it to be applicable to general geometric configurations, including low-obliquity planets like the Earth in inclined orbits. We simulate light curves of the Earth in an inclined orbit in three photometric bands (0.4-0.5 {mu}m, 0.6-0.7 {mu}m, and 0.8-0.9 {mu}m) and show that the distribution of clouds, snow, and continents is retrieved with the aid of the SOT. We also demonstrate the SOT by applying it to an upright Earth, a tidally locked Earth, and Earth analogs with ancient continental configurations. The inversion is model independent in the sense that we do not assume specific albedo models when mapping the surface, and hence applicable in principle to any kind of inhomogeneity. This method can potentially serve as a unique tool to investigate the exohabitats/exoclimes of Earth analogs.

Fujii, Yuka [Department of Physics, University of Tokyo, Tokyo 113-0033 (Japan); Kawahara, Hajime, E-mail: yuka.fujii@utap.phys.s.u-tokyo.ac.jp [Department of Physics, Tokyo Metropolitan University, Hachioji, Tokyo 192-0397 (Japan)

2012-08-20T23:59:59.000Z

127

Inclined-substrate deposition of biaxially textured magnesium oxide thin films for YBCO coated conductors.  

SciTech Connect (OSTI)

Highly textured MgO films were grown by the inclined-substrate deposition (ISD) technique at a high deposition rate. A columnar grain with a roofing-tile-shaped surface was observed in these MgO films. X-ray pole figure, and {phi}- and {omega}-scan were used to characterize in-plane and out-of-plane textures. MgO films deposited when the incline angle {alpha} was 55 and 30 degrees exhibited the best in-plane and out-of-plane texture, respectively. High-quality YBCO films were epitaxially grown on ISD-MgO-buffered Hastelloy C substrates by pulsed laser deposition. {Tc}=88 K, with sharp transition, and j{sub c} values of {approx}2x10{sup 5} A/cm{sup 2} at 77 K in zero field were observed on films 5 mm wide and 1 cm long. This work has demonstrated that biaxially textured ISD MgO buffer layers deposited on metal substrates are excellent candidates for fabrication of high-quality YBCO coated conductors.

Ma, B.; Li, M.; Jee, Y. A.; Koritala, R. E.; Fisher, B. L.; Balachandran, U.; Energy Technology

2002-02-01T23:59:59.000Z

128

Biaxially aligned template films fabricated by inclined-substrate deposition for YBCO-coated conductor applications.  

SciTech Connect (OSTI)

Inclined substrate deposition (ISD) has the potential for rapid production of high-quality biaxially textured buffer layers, which are important for YBCO-coated conductor applications. We have grown biaxially textured MgO films by ISD at deposition rates of 20-100 {angstrom}/sec. Columnar grains with a roof-tile surface structure were observed in the ISD-MgO films. X-ray pole figure analysis revealed that the (002) planes of the ISD-MgO films are tilted at an angle from the substrate normal. A small {phi}-scan full-width at half maximum (FWHM) of {approx}9{sup o} was observed on MgO films deposited at an inclination angle of 55{sup o}. In-plane texture in the ISD MgO films developed in the first 0.5 {micro}m from the interface, then stabilized with further increases in film thickness. YBCO films deposited by pulsed laser deposition on ISD-MgO buffered Hastelloy C276 substrates were biaxially aligned with the c-axis parallel to the substrate normal. T{sub c} of 91 K with a sharp transition and transport J{sub c} of 5.5 x 10{sup 5} A/cm{sup 2} at 77 K in self-field were measured on a YBCO film that was 0.46-{micro}m thick, 4-mm wide, 10-mm long.

Ma, B.; Li, M.; Koritala, R. E.; Fisher, B. L.; Erck, R. A.; Dorris, S. E.; Miller, D. J.; Balachandran, U.

2002-08-12T23:59:59.000Z

129

Technical Report TRARP1695 Automated Reasoning Project  

E-Print Network [OSTI]

Technical Report TR­ARP­16­95 Automated Reasoning Project Research School of Information Sciences Heuerding Automated Institute for Applied Mathematics Reasoning Project and Computer Science ANU University that contains automated proof procedures based on modal Gentzen systems for numerous propositional (nonclassical

Goré, Rajeev

130

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS  

E-Print Network [OSTI]

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS: 2006 PROGRAM DESCRIPTION AND RESULTS) for development of the DR Automation Server System This project could not have been completed without extensive: Greg Watson and Mark Lott · C&C Building Automation: Mark Johnson and John Fiegel · Chabot Space

131

INTEGRATING AUTOMATION DESIGN INFORMATION WITH XML  

E-Print Network [OSTI]

INTEGRATING AUTOMATION DESIGN INFORMATION WITH XML Mika Viinikkala, Seppo Kuikka Institute of Automation and Control, Tampere University of Technology, P.O. Box 692, 33101 Tampere, Finland Email: mika.viinikkala@tut.fi, seppo.kuikka@tut.fi Keywords: Systems integration, XML, automation design Abstract: This paper presents

132

A DISTRIBUTED AUTOMATION SYSTEM FOR ELECTROPHYSICAL INSTALLATIONS  

E-Print Network [OSTI]

A DISTRIBUTED AUTOMATION SYSTEM FOR ELECTROPHYSICAL INSTALLATIONS V.R. Kozak Budker Institute There was designed a set of devices for automation systems of physical installations. On this basis approach. KEY WORDS Automation, systems, applications, CANBUS, embedded, controller. 1. Introduction Budker

Kozak, Victor R.

133

TAMPERE UNIVERSITY OF TECHNOLOGY DEPARTMENT OF AUTOMATION  

E-Print Network [OSTI]

TAMPERE UNIVERSITY OF TECHNOLOGY DEPARTMENT OF AUTOMATION An Intelligent Web Service for Operation 2004 Examiner: Prof. Seppo Kuikka #12;2 Abstract TAMPERE UNIVERSITY OF TECHNOLOGY Automation Degree Program Institute of Automation and Control Jaakkola, Veli-Pekka: An Intelligent Web Service for Operation

134

Automating Shallow Seismic Imaging  

SciTech Connect (OSTI)

This seven-year, shallow-seismic reflection research project had the aim of improving geophysical imaging of possible contaminant flow paths. Thousands of chemically contaminated sites exist in the United States, including at least 3,700 at Department of Energy (DOE) facilities. Imaging technologies such as shallow seismic reflection (SSR) and ground-penetrating radar (GPR) sometimes are capable of identifying geologic conditions that might indicate preferential contaminant-flow paths. Historically, SSR has been used very little at depths shallower than 30 m, and even more rarely at depths of 10 m or less. Conversely, GPR is rarely useful at depths greater than 10 m, especially in areas where clay or other electrically conductive materials are present near the surface. Efforts to image the cone of depression around a pumping well using seismic methods were only partially successful (for complete references of all research results, see the full Final Technical Report, DOE/ER/14826-F), but peripheral results included development of SSR methods for depths shallower than one meter, a depth range that had not been achieved before. Imaging at such shallow depths, however, requires geophone intervals of the order of 10 cm or less, which makes such surveys very expensive in terms of human time and effort. We also showed that SSR and GPR could be used in a complementary fashion to image the same volume of earth at very shallow depths. The primary research focus of the second three-year period of funding was to develop and demonstrate an automated method of conducting two-dimensional (2D) shallow-seismic surveys with the goal of saving time, effort, and money. Tests involving the second generation of the hydraulic geophone-planting device dubbed the ''Autojuggie'' showed that large numbers of geophones can be placed quickly and automatically and can acquire high-quality data, although not under rough topographic conditions. In some easy-access environments, this device could make SSR surveying considerably more efficient and less expensive, particularly when geophone intervals of 25 cm or less are required. The most recent research analyzed the difference in seismic response of the geophones with variable geophone spike length and geophones attached to various steel media. Experiments investigated the azimuthal dependence of the quality of data relative to the orientation of the rigidly attached geophones. Other experiments designed to test the hypothesis that the data are being amplified in much the same way that an organ pipe amplifies sound have so far proved inconclusive. Taken together, the positive results show that SSR imaging within a few meters of the earth's surface is possible if the geology is suitable, that SSR imaging can complement GPR imaging, and that SSR imaging could be made significantly more cost effective, at least in areas where the topography and the geology are favorable. Increased knowledge of the Earth's shallow subsurface through non-intrusive techniques is of potential benefit to management of DOE facilities. Among the most significant problems facing hydrologists today is the delineation of preferential permeability paths in sufficient detail to make a quantitative analysis possible. Aquifer systems dominated by fracture flow have a reputation of being particularly difficult to characterize and model. At chemically contaminated sites, including U.S. Department of Energy (DOE) facilities and others at Department of Defense (DOD) installations worldwide, establishing the spatial extent of the contamination, along with the fate of the contaminants and their transport-flow directions, is essential to the development of effective cleanup strategies. Detailed characterization of the shallow subsurface is important not only in environmental, groundwater, and geotechnical engineering applications, but also in neotectonics, mining geology, and the analysis of petroleum reservoir analogs. Near-surface seismology is in the vanguard of non-intrusive approaches to increase knowledge of the shallow subsurface; our

Steeples, Don W.

2004-12-09T23:59:59.000Z

135

Chapter 13 - Commercial Building Automation  

Science Journals Connector (OSTI)

A Building Automation System (BAS) is a computerized, intelligent system that controls and measures lighting, climate, security, and other mechanical and electrical systems in a building. The purpose of a BAS is typically to reduce energy and maintenance costs, as well as to increase control, comfort, reliability, and ease of use for maintenance staff and tenants.

Jan Hller; Vlasios Tsiatsis; Catherine Mulligan; Stamatis Karnouskos; Stefan Avesand; David Boyle

2014-01-01T23:59:59.000Z

136

Automated computation meets hot QCD  

E-Print Network [OSTI]

We give a short review on recent progress in the field of automated calculations in finite-temperature field theory, where integration-by-parts techniques have proven (almost) as useful as in the zero-temperature case. Furthermore, we provide one concrete example of an evaluation of a new three-loop master sum-integral that exhibits maximal divergence.

Ioan Ghisoiu; York Schroder

2012-10-19T23:59:59.000Z

137

ALMS: Automated logic mapping system  

Science Journals Connector (OSTI)

ALMS is a set of design automation computer programs which accepts as input a description of a logic design, specifications of modules (e.g., chips, cards, etc.) into which the blocks of the design are to be partitioned or mapped, and some constraints ...

R. L. Russo; P. K. Wolff, Sr.

1971-06-01T23:59:59.000Z

138

Cockpit learning in power distant cockpits: The interaction effect of pilot's interdependence and inclination to teamwork in airline industry  

Science Journals Connector (OSTI)

Abstract Cockpit learning is an essential feature of flying profession, but it may be hampered by power distance in the cockpit due to captain/co-pilot subordination. Speaking-up to the captain may be difficult for some co-pilots but not speaking-up resulted in numerous aircraft accidents. This research examines cockpit learning among airline pilots and assumes that power distance reduces cockpit learning whereas pilot's interdependence and pilot's inclination towards teamwork can counter balance it. The study develops a short cockpit-learning-scale and validates it through a stratified sample of 231 pilots chosen from British Airways, Pakistan International Airline and Saudi Arabian Airline. Data analysis indicated a strong negative influence of power distance on cockpit learning, and significant interaction effect of pilot's interdependence and pilot's inclination towards teamwork. Together, the findings suggest that pilot's interdependence and inclination towards teamwork significantly minimize the negative influence of power distance on cockpit learning.

Muhammad Aftab Alam

2014-01-01T23:59:59.000Z

139

Rockwell Automation - Owens Corning Teaming Profile  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rockwell Automation Owens Corning Rockwell Automation Owens Corning 1201 S. Second Street 247 York Road Milwaukee, WI 53204 Guelph, Ontario N1E 3G4 Business: Industrial Automation Business: Textile / Fiber Nigel Hitchings Frank Peel Marketing Manager Electrical Support Specialist Phone: 508-357-8404 Phone: 519-823-7208 Email: nehitchings@ra.rockwell.com Email: frank.peel@owenscorning.com Owens Corning partners with Rockwell Automation to retrofit fans with VFDs, saving $67,000 annually Project Scope Owens Corning and Rockwell Automation installed Variable Frequency Drives (VFDs) on one 125HP cooling fan and three 40HP recirculation fans at the Owens Corning Guelph Glass Plant. The VFDs were integrated with the existing Rockwell Automation programmable automation controller to collect

140

Effects of heat transfer on peristaltic motion of Oldroyd fluid in the presence of inclined magnetic field  

Science Journals Connector (OSTI)

Abstract In this study the peristaltic motion of Oldroyd fluid in an asymmetric channel is investigated. Mathematical analysis has been carried out in the presence of an inclined magnetic field. Heat transfer is also taken into account. The physical problem is first modeled and then the analytical solutions of coupled equations are developed by regular perturbation method. Assumptions of long wavelength approximation are used. Effects of inclined magnetic field on the axial velocity and temperature are presented. Physical features of pertinent parameters such as wave number ?, Reynolds number Re , Weissenberg number Wi, Prandtl number Pr and Hartmann number M are also discussed graphically at the end of the paper.

A. Afsar Khan; R. Ellahi; M. Mudassar Gulzar; Mohsen Sheikholeslami

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Specimen coordinate automated measuring machine/fiducial automated measuring machine  

SciTech Connect (OSTI)

The Specimen coordinate Automated Measuring Machine (SCAMM) and the Fiducial Automated Measuring Machine (FAMM) is a computer controlled metrology system capable of measuring length, width, and thickness, and of locating fiducial marks. SCAMM and FAMM have many similarities in their designs, and they can be converted from one to the other without taking them out of the hot cell. Both have means for: supporting a plurality of samples and a standard; controlling the movement of the samples in the +/- X and Y directions; determining the coordinates of the sample; compensating for temperature effects; and verifying the accuracy of the measurements and repeating as necessary. SCAMM and FAMM are designed to be used in hot cells.

Hedglen, Robert E. (Bethel Park, PA); Jacket, Howard S. (Pittsburgh, PA); Schwartz, Allan I. (Turtle Creek, PA)

1991-01-01T23:59:59.000Z

142

Fabrication of biaxially textured templates for coated conductors by inclined substrate deposition.  

SciTech Connect (OSTI)

YBCO-coated conductors will enable the development of smaller, lighter, more-efficient electric power devices that can be operated at temperatures approaching that of liquid nitrogen. The critical current density (J{sub c}) of YBCO films on flexible metallic substrates has been significantly improved by epitaxially growing the YBCO on biaxially textured template films. Inclined substrate deposition (ISD) offers the potential for rapidly producing high-quality biaxially textured buffer layers that are suitable for YBCO-coated conductors. Using the ISD method, we have grown biaxially textured MgO films at deposition rates of 20-100 {angstrom}/sec. Electron microscopy of the ISD-MgO films revealed columnar grains topped off by MgO (002) planes, and X-ray pole figure analysis showed that the (002) planes are tilted with respect to the substrate normal, giving ISD-MgO films a roof-tile surface morphology. A small phi-scan full-width at half maximum of {approx}10{sup o} was observed on ISD-MgO films deposited with a substrate inclination of 55{sup o}. YBCO films were grown on ISD-MgO buffered Hastelloy substrates by pulsed laser deposition. A sample that was 0.42 {micro}m x 0.45 mm x 1 cm gave a transport J{sub c} of {approx}0.34 MA/cm{sup 2} at 77 K in self-field. Details of ISD-MgO film fabrication and characterization, as well as the results of YBCO deposited on the ISD-MgO architecture, are presented.

Dorris, S. E.; Ma, B.; Li, M.; Fisher, B. L.; Koritala, R. E.; Erck, R.; Miller, D. E.; Balachandran, U.

2002-08-21T23:59:59.000Z

143

Automated Export Control.PDF  

Broader source: Energy.gov (indexed) [DOE]

3 3 I N S P E C T I O N R E P O R T U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF INSPECTIONS INSPECTION OF THE DEPARTMENT OF ENERGY'S AUTOMATED EXPORT CONTROL SYSTEM DECEMBER 2001 U.S. DEPARTMENT OF ENERGY Washington, DC 20585 December 7, 2001 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman /s/ Inspector General SUBJECT: INFORMATION: Report on "Inspection of the Department of Energy's Automated Export Control System" BACKGROUND The National Defense Authorization Act for Fiscal Year 2000 (NDAA for FY 2000) contained a provision that not later than March 30 of each year the President will submit to Congress, beginning in the year 2000 and ending in the year 2007, an annual report on the Government's policies and procedures with respect to the export of technologies and technical information with

144

Automated Transportation Management System (ATMS)  

Broader source: Energy.gov (indexed) [DOE]

Re evised June 2010 Re evised June 2010 Autom The Depa Transport an integra system al outbound air. Its ea 1989 DOE significant operationa commerce electronic rates, pre transporta users eva shipments opportunit logistics im ATMS is i radioactiv shipments System ATMS is a activities p packaging including materials. common s lading, fre * W * C S * A * H * E * * O 0 mated T artment of Ene tation Manage ated web-base lowing users freight shipm arly developm E Inspector G t opportunitie al efficiency t e. Today's sy cally prepare s pare shipping ation bills befo aluate carrier s, and use co ties for system mprovements ts capability t ve and other h s in a comple Modules a modular sys performed by g and transpo radioactive a . Its modules shipment info eight bills, rate System Web Applic Carrier Eval Selection Automated

145

Automated Demand Response and Commissioning  

SciTech Connect (OSTI)

This paper describes the results from the second season of research to develop and evaluate the performance of new Automated Demand Response (Auto-DR) hardware and software technology in large facilities. Demand Response (DR) is a set of activities to reduce or shift electricity use to improve the electric grid reliability and manage electricity costs. Fully-Automated Demand Response does not involve human intervention, but is initiated at a home, building, or facility through receipt of an external communications signal. We refer to this as Auto-DR. The evaluation of the control and communications must be properly configured and pass through a set of test stages: Readiness, Approval, Price Client/Price Server Communication, Internet Gateway/Internet Relay Communication, Control of Equipment, and DR Shed Effectiveness. New commissioning tests are needed for such systems to improve connecting demand responsive building systems to the electric grid demand response systems.

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-04-01T23:59:59.000Z

146

Convection automated logic oven control  

SciTech Connect (OSTI)

For the past few years, there has been a greater push to bring more automation to the cooling process. There have been attempts at automated cooking using a wide range of sensors and procedures, but with limited success. The authors have the answer to the automated cooking process; this patented technology is called Convection AutoLogic (CAL). The beauty of the technology is that it requires no extra hardware for the existing oven system. They use the existing temperature probe, whether it is an RTD, thermocouple, or thermistor. This means that the manufacturer does not have to be burdened with extra costs associated with automated cooking in comparison to standard ovens. The only change to the oven is the program in the central processing unit (CPU) on the board. As for its operation, when the user places the food into the oven, he or she is required to select a category (e.g., beef, poultry, or casseroles) and then simply press the start button. The CAL program then begins its cooking program. It first looks at the ambient oven temperature to see if it is a cold, warm, or hot start. CAL stores this data and then begins to look at the food`s thermal footprint. After CAL has properly detected this thermal footprint, it can calculate the time and temperature at which the food needs to be cooked. CAL then sets up these factors for the cooking stage of the program and, when the food has finished cooking, the oven is turned off automatically. The total time for this entire process is the same as the standard cooking time the user would normally set. The CAL program can also compensate for varying line voltages and detect when the oven door is opened. With all of these varying factors being monitored, CAL can produce a perfectly cooked item with minimal user input.

Boyer, M.A.; Eke, K.I. [Apollo U.S.A. Inc., Orlando, FL (United States)] [Apollo U.S.A. Inc., Orlando, FL (United States)

1998-03-01T23:59:59.000Z

147

Integration of automation design information using XML technologies  

E-Print Network [OSTI]

Integration of automation design information using XML technologies Master of Science Thesis Mika UNIVERSITY OF TECHNOLOGY DEPARTMENT OF AUTOMATION #12;2 Abstract TAMPERE UNIVERSITY OF TECHNOLOGY Automation Degree Program Institute of Automation and Control Viinikkala, Mika: Integration of automation design

148

Definition: Distribution Automation Communications Network | Open Energy  

Open Energy Info (EERE)

Automation Communications Network Automation Communications Network Jump to: navigation, search Dictionary.png Distribution Automation Communications Network A communications network or networks designed to deliver control signals and information between distribution automation devices, and between these devices and utility grid control systems. These networks can utilize wired or wireless connections, and can be utility-owned or provided as services by a third party.[1] Related Terms distribution automation References ↑ https://www.smartgrid.gov/category/technology/distribution_automation_communications_network [[C LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ategory: Smart Grid Definitionssmart grid,smart grid, |Template:BASEPAGENAME]]smart grid,smart grid, Retrieved from

149

Mobile home automation: merging mobile value added services and home automation technologies  

Science Journals Connector (OSTI)

In this paper we study mobile home automation, a field that emerges from an integration of mobile application platforms and home automation technologies. We motivate our research and provide ... options of how he...

Goetz Botterweck; J. Felix Hampe

2009-06-01T23:59:59.000Z

150

Automated Surface Observing System: Standby Power Options  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Automated Automated Surface Observing System Standby Options Power Automated Surface Observing System (ASOS) General System Description * Self contained group of sensors and data gathering equipment that produces an automated weather observation * Weather observations support aviation, climate data, non government weather operations, public consumption, etc. * Initial deployment began in 1991 and continued through 1997 * Located at 884 sites nationwide, normally at airports * System has two distinct subsystems: Field installed equipment (DCP & Sensor Group) and an indoor processor (ACU) with peripherals * Separate facility power for DCP & Sensors and ACU 1 * measure and collect data * Located on the airport * back up group for 10 minutes * Currently pl

151

An Automated Raman Device for Gout Diagnosis  

Science Journals Connector (OSTI)

This study reports an automated Raman device to identify crystals in synovial aspirates from patients with gout symptoms. Combined with sample preparation, the device could diagnose...

Li, Bolan

152

Distributed Automated Demand Response - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transmission Find More Like This Return to Search Distributed Automated Demand Response Lawrence Livermore National Laboratory Contact LLNL About This Technology...

153

Substation automation gains momentum with modern options  

SciTech Connect (OSTI)

This paper discusses issues associated with utility substation automation. Monitoring equipment for monitoring power flow, quality, and harmonics for three substations simultaneously is described.

Beaty, W.

1996-12-01T23:59:59.000Z

154

Automated Logic Restructuring with aSPFDs  

Science Journals Connector (OSTI)

This chapter presents a comprehensive methodology to automate logic restructuring in combinational and sequential circuits. This technique algorithmically constructs the required transformation by utilizing a ...

Yu-Shen Yang; Subarna Sinha; Andreas Veneris

2011-01-01T23:59:59.000Z

155

Automated Transportation Management System (ATMS) | Department...  

Office of Environmental Management (EM)

of Energy's (DOE's) Automated Transportation Management System is an integrated web-based logistics management system allowing users to manage inbound and outbound freight...

156

Recommendation 207 : Automate the Stewardship Verification Process...  

Office of Environmental Management (EM)

recommends exploring ways to automate the stewardship tracking process and establish a web-based solution for managing long-term stewardship information for the Oak Ridge...

157

Chapter 38, Design Automation for Microelectronics, Springer Handbook of Automation Deming Chen  

E-Print Network [OSTI]

Chapter 38, Design Automation for Microelectronics, Springer Handbook of Automation Deming Chen of hardware and software systems in the past several decades. CAD techniques are the key driving forces behind techniques. In this chapter we will introduce the fundamentals of design automation as an engineering field

Chen, Deming

158

Automating Logical Preservation for Small Institutions with Hoppla  

E-Print Network [OSTI]

Automating Logical Preservation for Small Institutions with Hoppla Stephan Strodl, Petar Petrov and outsources digital preservation expertise. This paper presents the automated logical preservation process of automating logical preservation by outsourcing expertise. 1 Introduction Digital information form essential

159

Flow distribution in a solar collector panel with horizontally inclined absorber strips  

Science Journals Connector (OSTI)

The objective of this work is to theoretically and experimentally investigate the flow and temperature distribution in a solar collector panel with an absorber consisting of horizontally inclined strips. Fluid flow and heat transfer in the collector panel are studied by means of computational fluid dynamics (CFD) calculations. Further, experimental investigations of a 12.5m2 solar collector panel with 16 parallel connected horizontal fins are carried out. The flow distribution through the absorber is evaluated by means of temperature measurements on the backside of the absorber tubes. The measured temperatures are compared to the temperatures determined by the CFD model and there is a good similarity between the measured and calculated results. Calculations with the CFD model elucidate the flow and temperature distribution in the collector. The influences of different operating conditions such as flow rate, properties of solar collector fluid, solar collector fluid inlet temperature and collector tilt angle are shown. The flow distribution through the absorber fins is uniform if high flow rates are used. By decreased flow rate and decreased content of glycol in the glycol/water mixture used as solar collector fluid, and by increased collector tilt and inlet temperature, the flow distribution gets worse resulting in an increased risk of boiling in the upper part of the collector panel.

Jianhua Fan; Louise Jivan Shah; Simon Furbo

2007-01-01T23:59:59.000Z

160

Inclined-substrate deposition of biaxially aligned template films for YBCO-coated conductors.  

SciTech Connect (OSTI)

Inclined-substrate deposition (ISD) of magnesium oxide (MgO) produces biaxially textured template films at high deposition rates. This process is promising for the fabrication of the second-generation superconducting wires. Biaxially aligned MgO films ({approx}1.5 {mu}m thick) were deposited on polished Hastelloy C276 (HC) substrates by ISD at deposition rates of 20-100 {angstrom}/s. Buffer films were subsequently deposited on these template films, and YBCO films were deposited epitaxially on the substrates by pulsed laser deposition. X-ray pole figure analysis and {psi}- and {omega}-scans were used for texture characterization. Good in- and out-of-plane textures were observed, with MgO(0 0 2) {phi}-scan full-width at half maximum (FWHM) of 9.2{sup o} and {omega}-scan FWHM of 5.4{sup o}, respectively. T{sub c} of 90 K with a sharp transition, and J{sub c} {approx} 2 x 10{sup 5} A/cm{sup 2}, were obtained on a 0.5 {mu}m thick, 0.5 cm wide, and 1 cm long YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) film at 77 K in self-field.

Ma, B.; Li, M.; Fisher, B. L.; Koritala, R. E.; Balachandran, U. (Energy Technology)

2002-10-15T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Automated Critical Peak Pricing Field Tests: 2006 Pilot Program Description and Results  

E-Print Network [OSTI]

Target Hayward Software client Automated Logic TargetAntioch Automated Logic Target Bakersfield Software client

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila

2007-01-01T23:59:59.000Z

162

Open Automated Demand Response Communications Specification (Version 1.0)  

E-Print Network [OSTI]

and Techniques for Demand Response. May 2007. LBNL-59975.tofacilitateautomating demandresponseactionsattheInteroperable Automated Demand Response Infrastructure,

Piette, Mary Ann

2009-01-01T23:59:59.000Z

163

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

E-Print Network [OSTI]

Goodin. 2009. Open Automated Demand Response Communicationsin Demand Response for Wholesale Ancillary Services. InOpen Automated Demand Response Demonstration Project. LBNL-

Ghatikar, Girish

2010-01-01T23:59:59.000Z

164

Home Automation : Smart home technology and template house design.  

E-Print Network [OSTI]

??In this thesis, home automations general knowledge, technology information and each component will be introduced to the reader in the first half of the whole (more)

Zheng, Zeya

2013-01-01T23:59:59.000Z

165

V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple...  

Broader source: Energy.gov (indexed) [DOE]

5: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013...

166

U-047: Siemens Automation License Manager Bugs Let Remote Users...  

Broader source: Energy.gov (indexed) [DOE]

7: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary Code U-047: Siemens Automation License Manager Bugs Let Remote Users Deny Service or...

167

Appropriate automation of rail signalling systems: a human factors study.  

E-Print Network [OSTI]

??This thesis examines the effect of automation in the rail signalling environment. The level of automation in a system can be described as ranging along (more)

Balfe, Nora

2010-01-01T23:59:59.000Z

168

Automation of amperometric titrations with rotating platinum electrodes  

Science Journals Connector (OSTI)

Automation of amperometric titrations with rotating platinum electrodes ... A modification of an earlier described apparatus allows for the automation of amperometric titrations with rotating platinum electrodes. ...

Eugene D. Olsen; Roger D. Walton

1966-01-01T23:59:59.000Z

169

V-132: IBM Tivoli System Automation Application Manager Multiple...  

Energy Savers [EERE]

32: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 -...

170

ISA Approves Standard for Wireless Automation in Process Control...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the...

171

Small- and Medium-Size Building Automation and Control System...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Emerging...

172

Demand Response and Open Automated Demand Response  

E-Print Network [OSTI]

LBNL-3047E Demand Response and Open Automated Demand Response Opportunities for Data Centers G described in this report was coordinated by the Demand Response Research Center and funded by the California. Demand Response and Open Automated Demand Response Opportunities for Data Centers. California Energy

173

Atlas Sodium Automated Batch Synthesis System  

E-Print Network [OSTI]

Atlas Sodium Automated Batch Synthesis System (Syrris) June 2013 #12;Introduction to the system · The Atlas Sodium system consists of an Atlas base equipped with a 400ºC hotplate, a stacking dry bath systemL) for automated addition and/or removal of solution. · The system is computer controlled by the Atlas software

Subramanian, Venkat

174

PeopleSoft HR ECR Automation Process  

E-Print Network [OSTI]

PeopleSoft HR ECR Automation Process Short Term Disability with Pay May 2011 #12;Processing a Short Term Disability with Pay ECR Search Page To process a Short Term Disability using the automated ECR process, follow the menu navigation below: Home > Employee Change Request (ECR) > Use > ECR Create

Huang, Jianyu

175

PeopleSoft HR ECR Automation Process  

E-Print Network [OSTI]

PeopleSoft HR ECR Automation Process Revise Existing SWB May 2011 #12;Processing a Short Work Break Date Revision ECR Search Page To process a Short Work Break Date revision using the automated ECR process, follow the menu navigation below: Home > Employee Change Request (ECR) > Use > ECR Create

Huang, Jianyu

176

PeopleSoft HR ECR Automation Process  

E-Print Network [OSTI]

PeopleSoft HR ECR Automation Process Employee Work Hours Change (Temporary Basis) May 2012 #12 Documentation May, 2012 When the Originator is ready to create an Hours Change Request using the automated ECR the instructions below: - Home > Employee Change Request (ECR) > Use > ECR Create · If you know the Name or Eagle

Huang, Jianyu

177

PeopleSoft HR ECR Automation Process  

E-Print Network [OSTI]

PeopleSoft HR ECR Automation Process Long Term Disability May 2011 #12;Processing a Long Term Disability LTD ECR Search Page To process an LTD transaction using the automated ECR process, follow the menu navigation below: Home > Employee Change Request (ECR) > Use > ECR Create 2 · If you know the Name or Eagle

Huang, Jianyu

178

PeopleSoft HR ECR Automation Process  

E-Print Network [OSTI]

PeopleSoft HR ECR Automation Process Leave of Absence May 2012 #12;2 Table of Contents Create the Originator is ready to create a Leave of Absence using the automated ECR process, he/she will follow the menu navigation below to access the employee search page and then use the instructions below: - Home > Employee

Huang, Jianyu

179

Technical University of Denmark rsted DTU Automation  

E-Print Network [OSTI]

Technical University of Denmark ?rsted · DTU Automation Project: SICAM - SIngle Conversion stage;Isolated PDM and PWM DC-AC SICAMs Petar Ljusev, MSc., Ph.D. student, ?rsted · DTU Automation e-mail: pl

180

D Riso-R-429 Automated Uranium  

E-Print Network [OSTI]

routinely used analytical techniques for uranium determina- tions in geological samples, fissionCM i D Riso-R-429 Automated Uranium Analysis by Delayed-Neutron Counting H. Kunzendorf, L. Løvborg AUTOMATED URANIUM ANALYSIS BY DELAYED-NEUTRON COUNTING H. Kunzendorf, L. Løvborg and E.M. Christiansen

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Optimization of automation: I. Estimation method of cognitive automation rates reflecting the effects of automation on human operators in nuclear power plants  

Science Journals Connector (OSTI)

Abstract Since automation was introduced in various industrial fields, the concept of the automation rate has been used to indicate the inclusion proportion of automation among all work processes or facilities. Expressions of the inclusion proportion of automation are predictable, as is the ability to express the degree of the enhancement of human performance. However, many researchers have found that a high automation rate does not guarantee high performance. Therefore, to reflect the effects of automation on human performance, this paper proposes a new estimation method of the automation rate that considers the effects of automation on human operators in nuclear power plants (NPPs). Automation in \\{NPPs\\} can be divided into two types: system automation and cognitive automation. Some general descriptions and characteristics of each type of automation are provided, and the advantages of automation are investigated. The advantages of each type of automation are used as measures of the estimation method of the automation rate. One advantage was found to be a reduction in the number of tasks, and another was a reduction in human cognitive task loads. The system and the cognitive automation rate were proposed as quantitative measures by taking advantage of the aforementioned benefits. To quantify the required human cognitive task loads and thus suggest the cognitive automation rate, Conants information-theory-based model was applied. The validity of the suggested method, especially as regards the cognitive automation rate, was proven by conducting experiments. The result showed that a decreased rate of the operator working time was significantly related to the cognitive automation rate and that the calculation of the cognitive task load was useful as a measure of the cognitive automation rate.

Seung Min Lee; Jong Hyun Kim; Poong Hyun Seong

2014-01-01T23:59:59.000Z

182

Automation of hydroelectric power plants  

SciTech Connect (OSTI)

This paper describes how the author's company has been automating its hydroelectric generating plants. The early automations were achieved with a relay-type supervisory control system, relay logic, dc tachometer, and a pneumatic gate-position controller. While this system allowed the units to be started and stopped from a remote location, they were operated at an output that was preset by the pneumatic control at the generating site. The supervisory control system at the site provided such information as unit status, generator breaker status, and a binary coded decimal (BCD) value of the pond level. The generating units are started by energizing an on-site relay that sets the pneumatic gate controller to a preset value above the synchronous speed of the hydroelectric generator. The pneumatic controller then opens the water-wheel wicket gates to the preset startup position. As the hydroelectric generator starts to turn, the machine-mounted dc tachometer produces a voltage. At a dc voltage equivalent to synchronous speed, the generator main breaker closes, and a contact from the main breaker starts a field-delay timer. Within a few seconds, the field breaker closes. Once the cycle is complete, a relay changes the pneumatic setpoint to a preset operating point of about 8/10 wicket gate opening.

Grasser, H.S. (Consolidated Papers, Inc., Wisconsin Rapids, WI (US))

1990-03-01T23:59:59.000Z

183

Solar Automation Inc | Open Energy Information  

Open Energy Info (EERE)

Inc Inc Jump to: navigation, search Name Solar Automation Inc Place Albuquerque, New Mexico Zip NM 8110 Product Produces manufacturing equipment for PV cells. References Solar Automation Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Solar Automation Inc is a company located in Albuquerque, New Mexico . References ↑ "Solar Automation Inc" Retrieved from "http://en.openei.org/w/index.php?title=Solar_Automation_Inc&oldid=351247" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties About us Disclaimers Energy blogs Linked Data Developer services

184

Substation automation -- a ``bottoms up`` approach  

SciTech Connect (OSTI)

The proliferation of multi-purpose intelligent electronic devices in substations brought the availability of abundant and often overlapping data at the substation. This data can be used for improving the operation and maintenance of the substations and the entire power system. The objective of substation automation is to use technology to gather, consolidate and utilize this data for increasing the efficiency of power system operation and maintenance. Often automation functions are developed and offered around the capabilities of the preferred hardware and software of the integrator. Emphasis is placed on hardware, software and communication protocols rather than need, methodology and application. This can result in over-automation with complex, expensive and ineffective systems, or under-automation that fails to achieve the user`s objectives. The objective is to select appropriate hardware, software and methodology to build the most cost effective system to get the desired results. This paper describes steps to ensure the successful implementation of substation automation.

Thomas, J. [General Electric, Malvern, PA (United States)

1996-10-01T23:59:59.000Z

185

Dynamic Whitelist Generation for Automated Response  

Broader source: Energy.gov (indexed) [DOE]

Methodology Methodology Results Dynamic Whitelist Generation for Automated Response Chris Strasburg, Josh Adams Ames Laboratory, US DOE cstras@ameslab.gov, jadams@ameslab.gov The Ames Laboratory, US DOE 1 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results Outline 1 Introduction About Ames Laboratory Motivation 2 Methodology Data Classifiers Experiments 3 Results The Ames Laboratory, US DOE 2 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames Laboratory Motivation Ames Physical Environment The Ames Laboratory, US DOE 3 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames Laboratory Motivation Ames Network Environment The Ames Laboratory, US DOE 4 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames

186

Stellar model atmospheres with magnetic line blanketing. III. The role of magnetic field inclination  

E-Print Network [OSTI]

Context. See abstract in the paper. Aims. In the last paper of this series we study the effects of the magnetic field, varying its strength and orientation, on the model atmosphere structure, the energy distribution, photometric colors and the hydrogen Balmer line profiles. We compare with the previous results for an isotropic case in order to understand whether there is a clear relation between the value of the magnetic field angle and model changes, and to study how important the additional orientational information is. Also, we examine the probable explanation of the visual flux depressions of the magnetic chemically peculiar stars in the context of this work. Methods. We calculated one more grid of the model atmospheres of magnetic A and B stars for different effective temperatures (Teff=8000K, 11000K, 15000K), magnetic field strengths (B=0, 5, 10, 40 kG) and various angles of the magnetic field (Omega=0-90 degr) with respect to the atmosphere plane. We used the LLmodels code which implements a direct method for line opacity calculation, anomalous Zeeman splitting of spectral lines, and polarized radiation transfer. Results. We have not found significant changes in model atmosphere structure, photometric and spectroscopic observables or profiles of hydrogen Balmer lines as we vary the magnetic field inclination angle Omega. The strength of the magnetic field plays the main role in magnetic line blanketing. We show that the magnetic field has a clear relation to the visual flux depressions of the magnetic CP stars. Conclusions. See abstract in the paper.

S. A. Khan; D. V. Shulyak

2006-07-20T23:59:59.000Z

187

Inclined substrate deposition of magnesium oxide for YBCO-coated conductors.  

SciTech Connect (OSTI)

Thin films of YBa{sub 2}Cu{sub 3}O{sub 7-x} (YBCO) were grown on MgO buffered metallic substrates by pulsed laser deposition (PLD). The MgO buffer films, which provide the initial biaxial texture, had been grown on polished Hastelloy C276 (HC) tapes using inclined substrate deposition (ISD). The ISD process is promising for the fabrication of coated superconductor wires because it produces biaxially textured template films on nontextured substrate at high deposition rates. Biaxially aligned MgO films were deposited at deposition rates of 20 to 100 {angstrom}/sec. The buffer films were deposited on these template films before ablation of the YBCO films by PLD. The microstructure was studied by scanning electron microscopy and atomic force microscopy. X-ray pole figure analysis and {phi}- and {omega}-scans were used for texture characterization. Good in- and out-of-plane textures were observed on the ISD MgO films ({approx}1.5 {micro}m thick). The full width at half maximums were 9.2{sup o} for the MgO (002) {phi}-scan and 5.4{sup o} for the {omega}-scan. Cube-on-cube epitaxial growth of yttria-stabilized zirconia (YSZ) and ceria (CeO{sub 2}) films on the ISD MgO films was also achieved by PLD. A superconducting critical temperature of 90 K, with a sharp transition, and transport critical current density of >2.5 x 10{sup 5} A/cm{sup 2} were obtained on a 0.5-{micro}m-thick, 0.5-cm-wide, and 1-cm-long YBCO film with MgO buffer layer at 77 K in self-field.

Ma, B.; Li, M.; Fisher, B. L.; Koritala, R. E.; Dorris, S. E.; Maroni, V. A.; Balachandran, U.

2002-04-26T23:59:59.000Z

188

AUTOMATING GROUNDWATER SAMPLING AT HANFORD  

SciTech Connect (OSTI)

Until this past October, Fluor Hanford managed Hanford's integrated groundwater program for the U.S. Department of Energy (DOE). With the new contract awards at the Site, however, the CH2M HILL Plateau Remediation Company (CHPRC) has assumed responsibility for the groundwater-monitoring programs at the 586-square-mile reservation in southeastern Washington State. These programs are regulated by the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response Compensation and Liability Act (CERCLA). The purpose of monitoring is to track existing groundwater contamination from past practices, as well as other potential contamination that might originate from RCRA treatment, storage, and disposal (TSD) facilities. An integral part of the groundwater-monitoring program involves taking samples of the groundwater and measuring the water levels in wells scattered across the site. More than 1,200 wells are sampled each year. Historically, field personnel or 'samplers' have been issued pre-printed forms that have information about the well(s) for a particular sampling evolution. This information is taken from the Hanford Well Information System (HWIS) and the Hanford Environmental Information System (HEIS)--official electronic databases. The samplers used these hardcopy forms to document the groundwater samples and well water-levels. After recording the entries in the field, the samplers turned the forms in at the end of the day and the collected information was posted onto a spreadsheet that was then printed and included in a log book. The log book was then used to make manual entries of the new information into the software application(s) for the HEIS and HWIS databases. This is a pilot project for automating this tedious process by providing an electronic tool for automating water-level measurements and groundwater field-sampling activities. The automation will eliminate the manual forms and associated data entry, improve the accuracy of the information recorded, and enhance the efficiency and sampling capacity of field personnel. The goal of the effort is to eliminate 100 percent of the manual input to the database(s) and replace the management of paperwork by the field and clerical personnel with an almost entirely electronic process. These activities will include the following: scheduling the activities of the field teams, electronically recording water-level measurements, electronically logging and filing Groundwater Sampling Reports (GSR), and transferring field forms into the site-wide Integrated Document Management System (IDMS).

CONNELL CW; HILDEBRAND RD; CONLEY SF; CUNNINGHAM DE

2009-01-16T23:59:59.000Z

189

Automated cleaning of electronic components  

SciTech Connect (OSTI)

Environmental and operator safety concerns are leading to the elimination of trichloroethylene and chlorofluorocarbon solvents in cleaning processes that remove rosin flux, organic and inorganic contamination, and particulates from electronic components. Present processes depend heavily on these solvents for manual spray cleaning of small components and subassemblies. Use of alternative solvent systems can lead to longer processing times and reduced quality. Automated spray cleaning can improve the quality of the cleaning process, thus enabling the productive use of environmentally conscious materials, while minimizing personnel exposure to hazardous materials. We describe the development of a prototype robotic system for cleaning electronic components in a spray cleaning workcell. An important feature of the prototype system is the capability to generate the robot paths and motions automatically from the CAD models of the part to be cleaned, and to embed cleaning process knowledge into the automatically programmed operations.

Drotning, W.; Meirans, L.; Wapman, W.; Hwang, Y.; Koenig, L.; Petterson, B.

1994-07-01T23:59:59.000Z

190

A SIP-based Home Automation Platform: an Experimental Study  

E-Print Network [OSTI]

A SIP-based Home Automation Platform: an Experimental Study Benjamin Bertran, Charles Consel INRIA the requirements of home automation; we present the resulting architecture of a home automation system; and, we to tackle the challenges of the home automation domain. In this paper we present an approach and a platform

Boyer, Edmond

191

Fueling Robot Automates Hydrogen Hose Reliability Testing (Fact Sheet)  

SciTech Connect (OSTI)

Automated robot mimics fueling action to test hydrogen hoses for durability in real-world conditions.

Harrison, K.

2014-01-01T23:59:59.000Z

192

Automated Data Quality Analysis Research and Development  

E-Print Network [OSTI]

DOCUMENTATION 4.0 FUTURE DIRECTIONS 5.0 SUMMARY 6.0 CODE 1 2 3 5 5 12 17 17 18 February 2002, Final Report Energy Systems Laboratory, Texas A&M University p. 5 1.0 INTRODUCTION The Automated Data Quality process development is an effort to automate the analysis.... Automation of the "lower-level" data quality checking will enabled a more refined review process. Figure 1. Energy Core Polling and Reloading Process Diagram February 2002, Final Report Energy Systems Laboratory, Texas A&M University p. 6 2.2 Definitions...

Sweeney, J., Jr.; Haberl, J. S.

2002-01-01T23:59:59.000Z

193

j5 DNA Assembly Design Automation Software  

Science Journals Connector (OSTI)

j5 DNA Assembly Design Automation Software ... Here, we report the development and deployment of a web-based software tool, j5, which automates the design of scar-less multipart DNA assembly protocols including SLIC, Gibson, CPEC, and Golden Gate. ... The key innovations of the j5 design process include cost optimization, leveraging DNA synthesis when cost-effective to do so, the enforcement of design specification rules, hierarchical assembly strategies to mitigate likely assembly errors, and the instruction of manual or automated construction of scar-less combinatorial DNA libraries. ...

Nathan J. Hillson; Rafael D. Rosengarten; Jay D. Keasling

2011-12-07T23:59:59.000Z

194

Modular design for increasing assembly automation  

Science Journals Connector (OSTI)

Abstract Modular design can address the need for a high number of product variants and further allow a higher degree of automation in the assembly line. A framework is developed for the simultaneous modular product design and the design of automated manufacturing system. Product designs are optimized for automation using Design Structure Matrix and Modular Function Deployment. Alternative production systems are designed and accessed based on the analysis of assembly steps hierarchically. The implementation of the framework on the design of a production system for furniture assembly, able to handle multiple variants with a large number of components, is demonstrated.

Konstantinos Salonitis

2014-01-01T23:59:59.000Z

195

MEASUREMENTS OF STELLAR INCLINATIONS FOR KEPLER PLANET CANDIDATES. II. CANDIDATE SPIN-ORBIT MISALIGNMENTS IN SINGLE- AND MULTIPLE-TRANSITING SYSTEMS  

E-Print Network [OSTI]

We present a test for spin-orbit alignment for the host stars of 25 candidate planetary systems detected by the Kepler spacecraft. The inclination angle of each star's rotation axis was estimated from its rotation period, ...

Hirano, Teruyuki

196

AUTOMATION IN THE MEAT INDUSTRY | Slaughter Line Operation  

Science Journals Connector (OSTI)

Abstract The strongest incentives for the slaughter industry to adopt automation technology relate to the drive for improved productivity through reduced labor. Automation in the pig slaughter industry has mainly been adopted in regions with high labor costs such as Northern Europe. In New Zealand, the lamb slaughter industry has been progressive in developing and using automation to automate the slaughter process. Automation in beef slaughter is limited because of the complexity associated with handling of the biological variation. Barriers for slaughter line automation include the high cost and complexity associated with the development of slaughter automation technology, combined with limited market size.

J.U. Nielsen; N.T. Madsen; R. Clarke

2014-01-01T23:59:59.000Z

197

Level of Automation Effects on Situation Awareness and Functional Specificity in Automation Reliance.  

E-Print Network [OSTI]

??This thesis investigates the relationships between performance, workload, and situation awareness at varying levels of automation. The relationships observed in this study are compared to (more)

Smith, Adam

2012-01-01T23:59:59.000Z

198

Definition: Distribution Automation | Open Energy Information  

Open Energy Info (EERE)

Automation Automation Jump to: navigation, search Dictionary.png Distribution Automation DA is a family of technologies including sensors, processors, communication networks, and switches that can perform a number of distribution system functions depending on how they are implemented. Over the last 20 years, utilities have been applying DA to improve reliability, service quality and operational efficiency. More recently, DA is being applied to perform automatic switching, reactive power compensation coordination, or other feeder operations/control.[1] Related Terms sustainability, smart grid References ↑ https://www.smartgrid.gov/category/technology/distribution_automation [[Ca LikeLike UnlikeLike You and one other like this.One person likes this. Sign Up to see what your friends like.

199

Definition: Automated Distribution Circuit Switches | Open Energy  

Open Energy Info (EERE)

Circuit Switches Circuit Switches Jump to: navigation, search Dictionary.png Automated Distribution Circuit Switches Distribution circuit switches that can be operated automatically in response to control signals from local sensors, distribution automation systems, or grid control systems. Such switches can be installed as automated devices or existing equipment can be retrofitted with controls and communications. The degree of automation depends on the controls and communications system implemented. These switches can be opened or closed to isolate portions of a distribution circuit that has experienced a short circuit (fault), or must be taken out of service for maintenance or other operations. When used in combination, these switches can reroute power from other substations or nearby distribution circuits.[1]

200

LANL to certify automated influenza surveillance system  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

LANL to certify automated influenza surveillance system LANL to certify automated influenza surveillance system LANL to certify automated influenza surveillance system A compact automated system for surveillance and screening of potential pandemic strains of influenza and other deadly infectious diseases is a step closer to reality. January 31, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Automated visual inspection of rolled metal surfaces  

Science Journals Connector (OSTI)

A prototype for an automated visual on-line metal strip inspection system is described. The system is capable of both detecting and classifying surface defects in copper alloy strips, and it has been installed...

Timo Piironen; Olli Silven; Matti Pietikinen

1990-01-01T23:59:59.000Z

202

Automated intrusion recovery for web applications  

E-Print Network [OSTI]

In this dissertation, we develop recovery techniques for web applications and demonstrate that automated recovery from intrusions and user mistakes is practical as well as effective. Web applications play a critical role ...

Chandra, Ramesh, Ph. D. Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

203

Preface: Cognitive Engineering in Automated Systems Design  

E-Print Network [OSTI]

Preface: Cognitive Engineering in Automated Systems Design This special issue was motivated by an apparent paucity of research on applications of cognitive engineering principles in the design of complex systems including mainte- nance, manufacturing, and transportation systems. Cognitive engineering

Kaber, David B.

204

Honeywell modular automation system computer software documentation  

SciTech Connect (OSTI)

This document provides a Computer Software Docuemntation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-21I.

Cunningham, L.T.

1997-01-20T23:59:59.000Z

205

ZigBee Smart Home Automation Systems  

Science Journals Connector (OSTI)

This chapter summarizes a completed UK government funded project, the indeedNET ZigBee home automation system, which heralds a milestone in the ... energy saving devices with the potential to help home owners and...

Shuang-Hua Yang

2014-01-01T23:59:59.000Z

206

Graphic update of automated logic diagrams  

Science Journals Connector (OSTI)

The Automated Logic Diagram, or ALD, is a well defined document prepared by engineers to specify the design of a machine. 1 The document is coded for computer input by highly trained transcription personnel. Changes or corrections ...

Richard J. Uhlik

1968-07-01T23:59:59.000Z

207

Mirle Automation Corporation | Open Energy Information  

Open Energy Info (EERE)

Mirle Automation Corporation Mirle Automation Corporation Jump to: navigation, search Name Mirle Automation Corporation Place Hsinchu, Taiwan Zip 30077 Sector Solar Product A Taiwan-based automation system integrators and related product manufacturers who have entered thin film solar cell manufacturing equipment business. Coordinates 24.69389°, 121.148064° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":24.69389,"lon":121.148064,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

208

Distributed Intelligent Automated Demand Response (DIADR) Building  

Broader source: Energy.gov (indexed) [DOE]

Distributed Intelligent Automated Demand Distributed Intelligent Automated Demand Response (DIADR) Building Management System Distributed Intelligent Automated Demand Response (DIADR) Building Management System The U.S. Department of Energy (DOE) is currently conducting research into distributed intelligent-automated demand response (DIADR) building management systems. Project Description This project aims to develop a DIADR building management system with intelligent optimization and control algorithms for demand management, taking into account a multitude of factors affecting cost including: Comfort Heating, ventilating, and air conditioning (HVAC) Lighting Other building systems Climate Usage and occupancy patterns. The key challenge is to provide the demand response the ability to address more and more complex building systems that include a variety of loads,

209

Design automation for microfluidics-based biochips  

Science Journals Connector (OSTI)

Advances in microfluidics technology offer exciting possibilities in the realm of enzymatic analysis, DNA analysis, proteomic analysis involving proteins and peptides, immunoassays, implantable drug delivery devices, and environmental toxicity monitoring. ... Keywords: Microfluidics, biochips, design automation

Krishnendu Chakrabarty; Jun Zeng

2005-10-01T23:59:59.000Z

210

Automating Logic Rectification by Approximate SPFDs  

Science Journals Connector (OSTI)

In the digital VLSI cycle, a netlist is often modified to correct design errors, perform small specification changes or implement incremental rewiring-based optimization operations. Most existing automated logic rectification tools use a small set of ... Keywords: SAT-based algorithm, approximate SPFD, digital VLSI cycle, design errors, incremental rewiring-based optimization operations, automated logic rectification tools, predefined logic transformations, memory/time explosion problem

Yu-Shen Yang; S. Sinha; A. Veneris; R. K. Brayton

2007-01-01T23:59:59.000Z

211

Analysis of Open Automated Demand Response Deployments in California and Guidelines to Transition to Industry Standards  

E-Print Network [OSTI]

to Automated Demand Response and the OpenADR Automated Demand Response Program. https://Data for Automated Demand Response in Commercial

Ghatikar, Girish

2014-01-01T23:59:59.000Z

212

Open Automated Demand Response Technologies for Dynamic Pricing and Smart Grid  

E-Print Network [OSTI]

for Automated Demand Response in Commercial Buildings. In2010. Open Automated Demand Response Dynamic Pricing2009. Open Automated Demand Response Communications

Ghatikar, Girish

2010-01-01T23:59:59.000Z

213

Explorations of Space-Charge Limits in Parallel-Plate Diodes and Associated Techniques for Automation  

E-Print Network [OSTI]

and Associated Techniques for Automation by Benjamin Ragan-and Associated Techniques for Automation Copyright 2013 byand Associated Techniques for Automation by Benjamin Ragan-

Ragan-Kelley, Benjamin

2013-01-01T23:59:59.000Z

214

Demonstration of Datacenter Automation Software and Hardware (DASH) at the California Franchise Tax Board  

E-Print Network [OSTI]

of Datacenter Automation Software and Hardware (DASH) at theof Datacenter Automation Software and Hardware (DASH) at theprotocol for building automation and control networks. It is

Bell, Geoffrey C.

2010-01-01T23:59:59.000Z

215

Automation for on-line remote-control in-situ electron microscopy  

E-Print Network [OSTI]

Pfefferkorn Conference (1996) Automation for On-Line Remote-Pfefferkorn Conference (1996) Automation for On-Line Remote-by incorporating local automation of stage control and

1996-01-01T23:59:59.000Z

216

Automated Demand Response Technologies and Demonstration in New York City using OpenADR  

E-Print Network [OSTI]

EMCS Vendor and Product Automated Logic Control RemoteBuildings Integrator, Automated Logic Corporations WebCTRLIntegrator (EBI), Automated Logic Corporations WebCTRL ,

Kim, Joyce Jihyun

2014-01-01T23:59:59.000Z

217

Automated diagnostics scoping study. Final report  

SciTech Connect (OSTI)

The objective of the Automated Diagnostics Scoping Study was to investigate the needs for diagnostics in building operation and to examine some of the current technologies in automated diagnostics that can address these needs. The study was conducted in two parts. In the needs analysis, the authors interviewed facility managers and engineers at five building sites. In the technology survey, they collected published information on automated diagnostic technologies in commercial and military applications as well as on technologies currently under research. The following describe key areas that the authors identify for the research, development, and deployment of automated diagnostic technologies: tools and techniques to aid diagnosis during building commissioning, especially those that address issues arising from integrating building systems and diagnosing multiple simultaneous faults; technologies to aid diagnosis for systems and components that are unmonitored or unalarmed; automated capabilities to assist cause-and-effect exploration during diagnosis; inexpensive, reliable sensors, especially those that expand the current range of sensory input; technologies that aid predictive diagnosis through trend analysis; integration of simulation and optimization tools with building automation systems to optimize control strategies and energy performance; integration of diagnostic, control, and preventive maintenance technologies. By relating existing technologies to perceived and actual needs, the authors reached some conclusions about the opportunities for automated diagnostics in building operation. Some of a building operator`s needs can be satisfied by off-the-shelf hardware and software. Other needs are not so easily satisfied, suggesting directions for future research. Their conclusions and suggestions are offered in the final section of this study.

Quadrel, R.W.; Lash, T.A.

1994-06-01T23:59:59.000Z

218

ISA Approves Standard for Wireless Automation in Process Control  

Broader source: Energy.gov (indexed) [DOE]

ISA Approves Standard for Wireless Automation in Process Control ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. ISA Approves Standard for Wireless Automation in Process Control Applications More Documents & Publications DOE/OE National SCADA Test Bed Fiscal Year 2009 Work Plan Wireless System Considerations When Implementing NERC Critical Infrastructure Protection Standards Control Systems Security Standards: Accomplishments And Impacts

219

?Thermo-Hydraulic Performance of a Roughened Square Duct Having Inclined Ribs with a Gap on Two Opposite Walls  

E-Print Network [OSTI]

Abstract:- Experimentation has been carried out to find the influence of a gap provided in ribs on thermohydraulic performance of a square duct roughened with discrete inclined ribs. The two opposite walls of the square duct are roughened with ribs having attack angle (?) of 45 0 and a gap on its length. The investigation has been performed for relative roughness pitch (p/e) of 10, relative roughness height (e/Dh) of 0.060 and Reynolds number is varied in the range of 5000-40,000. The other rib parameters; relative gap position (d/W) and relative gap width (g/e) is varied in the range of 1/4 2/3(4 steps) and 0.5 1.5 (3 steps) respectively. The comparative study of various cases shows that the ribs with a gap considerably enhance the value of thermohydraulic performance for the range of parameters taken for the present investigation. Presence of inclined ribs with a gap yields about 2.1-fold enhancements in thermo-hydraulic performance as compared to smooth duct. The maximum value of thermo-hydraulic performance parameter has been observed for relative gap width of 1.0 and the relative gap position of 1/3. Keywords:- Relative gap width, Relative gap position, Reynolds number, Thermo-hydraulic performance. I.

unknown authors

220

An investigation of the effects of wind-induced inclination on floating wind turbine dynamics: heave plate excursion  

Science Journals Connector (OSTI)

Abstract A current trend in offshore wind is the quest for exploitation of ever deeper water sites. At depths between 50m and 100m a promising substructure is the column-stabilised semi-submersible floating type. This solution is currently being tested at full scale at the WindFloat and Fukushima Forward demonstrator sites in Portugal and Japan respectively. The semi-sub design class frequently adopts passive motion control devices based on the water entrapment principle, such as heave plates, tanks, and skirts. Whilst effective for small inclinations, these can underperform when the structure is inclined under wind loading. This study examines the alteration of potential hydrodynamics due to wind-induced trim (geometric non-linearity) and its impact on the wind turbine?s wave response with focus on heave plate performance. Firstly it is shown by using the boundary element approach that wind trim affects wave loading in the ocean wave band between 5s and 15s, and introduces hydrodynamic coupling typical of non-symmetric hulls. These features are incorporated in frequency-domain dynamic response analysis to demonstrate that said effects bear a significant impact on the turbine?s motion in waves. Accounting of heave plate excursion improves the assessment of the seaworthiness of floating wind turbine concepts, potentially leading to new design constraints.

Raffaello Antonutti; Christophe Peyrard; Lars Johanning; Atilla Incecik; David Ingram

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

n-Tiered Test Automation Architecture for Agile Software Systems  

Science Journals Connector (OSTI)

Abstract This paper introduces a multi-tiered test automation architecture to optimize test automation in an Agile software development environment while increasing both the test coverage and depth of each tier. Test Automation is the act of converting manual test cases into automated scripts that can be executed autonomously. In general, testing accounts for roughly 60% of the overall development budget and approximately 50% of that is attributed to regression testing. In recent years software organizations have begun migrating to Agile software development practices and automated testing in hopes of reducing the cost, lengthy regression cycles, and time to market. Traditionally, test automation is conducted on stable, non-changing applications. In an Agile environment where the code constantly changes, automated test cases become obsolete and must constantly be refactored in order to provide meaningful feedback about the system's quality. In most instances the cost of maintenance of automated test code completely overshadows the entire automation effort and negates any possible Return on Investment (RoI). An n-Tiered Test Automation Architecture seeks to retain the RoI by abstracting the automation project into separate distinct tiers; Presentation, Business, Data, and Services. These abstractions allow automated testing to continue providing feedback despite the constant revision of the system. A case study was conducted using this method and the observations showed that the automation architecture was resilient to change while increasing the test coverage, the depth of testing, and the overall quality of the application under test.

Patrick Day

2014-01-01T23:59:59.000Z

222

Field Testing of Automated Demand Response for Integration of Renewable Resources in California's Ancillary Services Market for Regulation Products  

E-Print Network [OSTI]

Controls Larry Bacher, Automated Logic Corporation Louiscontrolled from a central Automated Logic Corporation energy

Kiliccote, Sila

2013-01-01T23:59:59.000Z

223

Definition: Automated Capacitors | Open Energy Information  

Open Energy Info (EERE)

Capacitors Capacitors Jump to: navigation, search Dictionary.png Automated Capacitors Capacitors can increase the voltage on a distribution circuit by providing reactive power (often referred to as volt-amperes-reactive or VArs). Capacitor banks are switched in discrete steps, either manually, or in response to the voltage at the location where they are connected; typically, distribution capacitor banks are switched in a single step. If the voltage falls too far below the set point, the capacitor is switched in to raise the voltage. If the voltage rises too high above the set point, the capacitor is switched out to lower the voltage. Automated capacitors can be switched in coordination with other voltage control devices with signals from local sensors, distribution automation systems, or grid

224

AIS Automation Dresden | Open Energy Information  

Open Energy Info (EERE)

AIS Automation Dresden AIS Automation Dresden Jump to: navigation, search Name AIS Automation Dresden Place Dresden, Germany Zip D-01237 Product Provides software for industrial process control for the semiconductor and photovoltaic industries. Coordinates 51.053645°, 13.740815° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":51.053645,"lon":13.740815,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

225

Analysis of Open Automated Demand Response Deployments in California  

E-Print Network [OSTI]

LBNL-6560E Analysis of Open Automated Demand Response Deployments in California and Guidelines The work described in this report was coordinated by the Demand Response Research. #12; #12;Abstract This report reviews the Open Automated Demand Response

226

Automated Demand Response Strategies and Commissioning Commercial Building Controls  

E-Print Network [OSTI]

4 9 . Piette et at Automated Demand Response Strategies andDynamic Controls for Demand Response in New and ExistingFully Automated Demand Response Tests in Large Facilities"

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

227

Petri Net Based Research of Home Automation Communication Protocol  

Science Journals Connector (OSTI)

The popularity of home automation has been increasing greatly in recent years. ... distributed, uncertain or randomized protocol model) of home automation, many questions concerned. For instance, is ... net to de...

Guangxuan Chen; Yanhui Du; Panke Qin; Jin Du

2013-01-01T23:59:59.000Z

228

A framework for interactive end-user web automation.  

E-Print Network [OSTI]

??This research investigates the feasibility and usefulness of a Web-based model for end-user Web automation. The aim is to empower end users to automate their (more)

Eliwa, Essam

2013-01-01T23:59:59.000Z

229

Department of Mechanical Engineering Spring 2011 Nanoparticle Reactor Automation  

E-Print Network [OSTI]

PENNSTATE Department of Mechanical Engineering Spring 2011 Nanoparticle Reactor Automation Overview would be fully automated and able to run overnight. The team was also asked to keep the solutions from

Demirel, Melik C.

230

Automating Logic Rectification by Approximate SPFDs Yu-Shen Yang  

E-Print Network [OSTI]

Automating Logic Rectification by Approximate SPFDs Yu-Shen Yang Dept. of ECE University of Toronto changes or implement incremental rewiring-based optimization operations. Most existing automated logic

Veneris, Andreas

231

Automated Store Management For Drum Storage Facility  

SciTech Connect (OSTI)

This paper describes advanced system technology developed for a new Drum Storage Facility to be operated by Taiwan Power Company (TPC). A logistics management concept is applied for the storage of solid rad-wastes in terms of automated handling, transportation and storing as well as in terms of data management. The individual equipments, such as automated Bridge Cranes, Automatic Guided Vehicles and auxiliary systems are introduced in this paper and the store management process is outlined. The authors report furthermore on challenges during the design and engineering phase and review the project implementation from the equipment supplier's end. (authors)

Koller, W.; Lang, R. [Siempelkamp Nukleartechnik GmbH, Krefeld (Germany)

2008-07-01T23:59:59.000Z

232

Beyond Commissioning: The Role of Automation  

SciTech Connect (OSTI)

This article takes a brief look at the benefits of commissioning and describes a vision of the future where most of the objectives of commissioning will be accomplished automatically by capabilities built into the building systems themselves. Commissioning will become an activity that's performed continuously rather than periodically, and only repairs requiring replacement or overhaul of equipment will require manual intervention. The article then identifies some of the technologies that will be needed to realize this vision and ends with a call for all involved in the enterprise of building commissioning and automation to embrace and dedicate themselves to a future of automated commissioning.

Brambley, Michael R.; Katipamula, Srinivas

2005-02-01T23:59:59.000Z

233

Automated generation of lattice QCD Feynman rules  

E-Print Network [OSTI]

The derivation of the Feynman rules for lattice perturbation theory from actions and operators is complicated, especially for highly improved actions such as HISQ. This task is, however, both important and particularly suitable for automation. We describe a suite of software to generate and evaluate Feynman rules for a wide range of lattice field theories with gluons and (relativistic and/or heavy) quarks. Our programs are capable of dealing with actions as complicated as (m)NRQCD and HISQ. Automated differentiation methods are used to calculate also the derivatives of Feynman diagrams.

A. Hart; G. M. von Hippel; R. R. Horgan; E. H. Mller

2009-04-02T23:59:59.000Z

234

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network [OSTI]

Report 2009. Open Automated Demand Response Communicationsand Techniques for Demand Response. California Energyand S. Kiliccote. Estimating Demand Response Load Impacts:

Kiliccote, Sila

2010-01-01T23:59:59.000Z

235

How to Make Ad Hoc Proof Automation Less Ad Hoc  

E-Print Network [OSTI]

How to Make Ad Hoc Proof Automation Less Ad Hoc Georges Gonthier1 Beta Ziliani2 Aleks Nanevski3 Software Institute, Madrid ICFP 2011, Tokyo #12;Why proof automation at ICFP? Ad hoc polymorphism Overloading terms Ad hoc proof automation Overloading lemmas "How to make ad hoc polymorphism less ad hoc

Dreyer, Derek

236

Techniques for Securing Substation Automation Systems David Guidry1  

E-Print Network [OSTI]

Techniques for Securing Substation Automation Systems David Guidry1 , Mike Burmester1 , Xiuwen Liu1 propose techniques for resilient substation automation of power utility systems with security based-90-5 compliant substation automation systems that are resilient. We demonstrate the feasibility of our approach

Burmester, Mike

237

Automated FMEA based diagnostic symptom generation. Neal Snooke1,  

E-Print Network [OSTI]

Automated FMEA based diagnostic symptom generation. Neal Snooke1, , Chris Price Department the model based simulation used to produce an automated Failure Modes and Effect Analysis (FMEA to automate the production of a FMEA report, and the paper also considers the relationship between FMEA

Snooke, Neal

238

Home Automation in the Wild: Challenges and Opportunities  

E-Print Network [OSTI]

Home Automation in the Wild: Challenges and Opportunities A.J. Bernheim Brush, Bongshin Lee, Ratul enabling home automation. However, these technologies have not been widely adopted despite being available visits to 14 households with home automation. The long term experience, both positive and negative

Rajamani, Sriram K.

239

A Component Framework for Telecare and Home Automation  

E-Print Network [OSTI]

A Component Framework for Telecare and Home Automation Claire Maternaghan and Kenneth J. Turner-the-shelf and novel components. Keywords ­ Component Framework, Home Automation, Service-Oriented Architecture required. Home automation allows users to interact with their home as a whole, and to have flexible control

Hammerton, James

240

Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns  

E-Print Network [OSTI]

Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns Edwin O of two prediction algorithms, thus demonstrating multiple uses for a home automation system. Finally, we Several research efforts are focused on home automation. The Intelligent Room [2] uses an array of sensors

Cook, Diane J.

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Remote-Controlled Home Automation Systems with Different Network Technologies  

E-Print Network [OSTI]

Remote-Controlled Home Automation Systems with Different Network Technologies Armando Roy Delgado into the potential for remote controlled operation of home automation systems. It considers problems, 2002) which certainly requires a careful study before developing any suitable Home Automation System

Grout, Vic

242

Automation strategies: existing theory or ad hoc decisions?  

Science Journals Connector (OSTI)

Automating manufacturing systems potentially improves competitiveness. Empirical studies show that the most successful result is achieved when decisions concerning automation are linked to the manufacturing strategies and competitive priorities of the company. It is suggested that automation is regarded as a separate decision group, within the manufacturing strategy content field.

Mats Winroth; Kristina Safsten; Johan Stahre

2007-01-01T23:59:59.000Z

243

Density Functional Theory-Based Database Development and CALPHAD Automation  

E-Print Network [OSTI]

Density Functional Theory-Based Database Development and CALPHAD Automation YI WANG,1,2 SHUNLI, the integration of first-principles calculations, CALPHAD modeling, and the automation of phase diagram, and the automated calculation of a phase diagram for the Al- Mg system. INTRODUCTION In thermodynamics, a phase

Chen, Long-Qing

244

Security Automation Developer Days March 22-25, 2011  

E-Print Network [OSTI]

Security Automation Developer Days March 22-25, 2011 Portrait Room The National Institute Reporting Format (ARF) efforts. 1:00 ­ 2:50 Adv. Tailoring and Automated Profile Selection Charles Schmidt tailoring procedures, and structures that could support automated selection of profiles. This discussion

Magee, Joseph W.

245

The Automation of Sound Reasoning and Successful Proof Finding  

E-Print Network [OSTI]

709 44 The Automation of Sound Reasoning and Successful Proof Finding LARRY WOS AND BRANDEN scientist naturally envisioned the automation of sound rea- soning ­ reasoning in which conclusions, and find proofs. But can such logical reasoning be fully automated? Can a single computer program

Fitelson, Branden

246

http://jla.sagepub.com/ Journal of Laboratory Automation  

E-Print Network [OSTI]

http://jla.sagepub.com/ Journal of Laboratory Automation http://jla.sagepub.com/content/early/2012 2012Journal of Laboratory Automation Timothy J. Bunning and Tony Jun Huang Yan Jun Liu, Mengqian Lu://www.sagepublications.com On behalf of: Society for Laboratory Automation and Screening can be found at:Journal of Laboratory

Demirel, Melik C.

247

IT/Automation Cost Reduction in Intel's Manufacturing Environment  

E-Print Network [OSTI]

IT/Automation Cost Reduction in Intel's Manufacturing Environment Brian Subirana subirana@mit.edu MIT Center for Coordination Science WP #222 July 2003 #12;IT/Automation Cost Reduction in Intel maintaining existing service levels. "We want you to reduce automation costs by 50% while maintaining equal

248

Control, automation and the hot rolling of steel  

Science Journals Connector (OSTI)

...Shercliff and M. J. Stowell Control, automation and the hot rolling of steel P.J...Rugby CV21 1BU, UK The current state of automation and control for hot rolling mills...mills|rolling mill models| Control, automation and the hot rolling of steel By P...

1999-01-01T23:59:59.000Z

249

AUTOMATED LOGIC SYNTHESIS OF RANDOM PATTERN TESTABLE CIRCUITS  

E-Print Network [OSTI]

AUTOMATED LOGIC SYNTHESIS OF RANDOM PATTERN TESTABLE CIRCUITS Nur A. Touba and Edward J. Mc during logic synthesis. An automated logic synthesis procedure is described which takes as an input a two. The approach taken in this paper is to consider random pattern testability during logic synthesis. An automated

Touba, Nur A.

250

Optimization of angle of inclination of the hybrid photovoltaic-thermal solar collector using particle swarm optimization algorithm  

Science Journals Connector (OSTI)

In this paper a mathematical model is used to determine the solar radiation incident on an inclined surface and the optimum slope angles for each month season and year are calculated for solar hybrid collectors. We recommend on how the collected energy can be increased by varying the tilt angle. First we esteem the global solar radiation on a horizontal surface of a thermal photovoltaic hybrid collector (PVT) for a clear sky. The data set of the solar radiation at Ghardaa (Algeria) measured during 2013 was used to analyze the models of global solar radiation estimation. The models of performance are evaluated by using the coefficient of correlation (R2) the absolute average error skew (mean absolute error MABE) average quadratic error (mean square error RMSE) the percentage of the average error (MPE) and the percentage of average absolute error. Then the anisotropic and isotropic models that provide the most accurate estimation of the total solar radiation has been used to determine the optimum collector slope. Particle swarm optimization method was applied to obtain the tilt angle setting of the tilt angle of PVT collector. The objective was to improve the efficiency of PVT collector. The results show that these models used are very well designed. The coefficient of correlation (R2) varies from 0. 90 to 0. 99. For the percentage of errors of prediction (MABE and RMSE) lowered by 0.1 it is observed also that the angle of inclination of PVT collector takes different values during the year and that the collector received more solar energy compared to collector without optimal angle.

2014-01-01T23:59:59.000Z

251

Salsbury and Diamond: Automated Testing of HVAC Systems for Commissioning -1 -Automated Testing of HVAC Systems for Commissioning  

E-Print Network [OSTI]

and Diamond: Automated Testing of HVAC Systems for Commissioning - 1 - Automated Testing of HVAC Systems This paper describes an approach to the automation of the commissioning of HVAC systems. The approach of many HVAC systems is limited more by poor installation, commissioning, and maintenance than by poor

252

Automated Architectural Exploration for Signal Processing Algorithms  

E-Print Network [OSTI]

Automated Architectural Exploration for Signal Processing Algorithms Ramsey Hourani, Ravi Jenkal, W processing algorithms. The goal of our framework is to improve hardware architectural exploration by guiding Property (IP) cores for system level signal processing algorithms. We present our view of a framework

Davis, Rhett

253

Automated Fuel Dispensing System Form Instructions  

E-Print Network [OSTI]

Automated Fuel Dispensing System Form Instructions If additional forms are necessary to provide(s) are hired and will be obtaining fuel, an Add Driver Form MUST be submitted for entry into the web database and/or diesel fuel to operate. Note: When a new vehicle, golf cart (gasoline), etc., is placed

Fernandez, Eduardo

254

Automated structure solution with the PHENIX suite  

SciTech Connect (OSTI)

Significant time and effort are often required to solve and complete a macromolecular crystal structure. The development of automated computational methods for the analysis, solution, and completion of crystallographic structures has the potential to produce minimally biased models in a short time without the need for manual intervention. The PHENIX software suite is a highly automated system for macromolecular structure determination that can rapidly arrive at an initial partial model of a structure without significant human intervention, given moderate resolution, and good quality data. This achievement has been made possible by the development of new algorithms for structure determination, maximum-likelihood molecular replacement (PHASER), heavy-atom search (HySS), template- and pattern-based automated model-building (RESOLVE, TEXTAL), automated macromolecular refinement (phenix. refine), and iterative model-building, density modification and refinement that can operate at moderate resolution (RESOLVE, AutoBuild). These algorithms are based on a highly integrated and comprehensive set of crystallographic libraries that have been built and made available to the community. The algorithms are tightly linked and made easily accessible to users through the PHENIX Wizards and the PHENIX GUI.

Terwilliger, Thomas C [Los Alamos National Laboratory; Zwart, Peter H [LBNL; Afonine, Pavel V [LBNL; Grosse - Kunstleve, Ralf W [LBNL

2008-01-01T23:59:59.000Z

255

Automated Structure Solution with the PHENIX Suite  

SciTech Connect (OSTI)

Significant time and effort are often required to solve and complete a macromolecular crystal structure. The development of automated computational methods for the analysis, solution and completion of crystallographic structures has the potential to produce minimally biased models in a short time without the need for manual intervention. The PHENIX software suite is a highly automated system for macromolecular structure determination that can rapidly arrive at an initial partial model of a structure without significant human intervention, given moderate resolution and good quality data. This achievement has been made possible by the development of new algorithms for structure determination, maximum-likelihood molecular replacement (PHASER), heavy-atom search (HySS), template and pattern-based automated model-building (RESOLVE, TEXTAL), automated macromolecular refinement (phenix.refine), and iterative model-building, density modification and refinement that can operate at moderate resolution (RESOLVE, AutoBuild). These algorithms are based on a highly integrated and comprehensive set of crystallographic libraries that have been built and made available to the community. The algorithms are tightly linked and made easily accessible to users through the PHENIX Wizards and the PHENIX GUI.

Zwart, Peter H.; Zwart, Peter H.; Afonine, Pavel; Grosse-Kunstleve, Ralf W.; Hung, Li-Wei; Ioerger, Tom R.; McCoy, A.J.; McKee, Eric; Moriarty, Nigel; Read, Randy J.; Sacchettini, James C.; Sauter, Nicholas K.; Storoni, L.C.; Terwilliger, Tomas C.; Adams, Paul D.

2008-06-09T23:59:59.000Z

256

Honeywell Modular Automation System Computer Software Documentation  

SciTech Connect (OSTI)

This document provides a Computer Software Documentation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-211 and vertical denitration calciner in HC-230C-2.

CUNNINGHAM, L.T.

1999-09-27T23:59:59.000Z

257

AUTOMATED PLANNING FOR HYDROTHERMAL VENT PROSPECTING USING  

E-Print Network [OSTI]

AUTOMATED PLANNING FOR HYDROTHERMAL VENT PROSPECTING USING AUVS by ZEYN A SAIGOL A thesis submitted of searching the ocean floor for hydrothermal vents, using autonomous underwater vehicles (AUVs process (POMDP), but with a very large state space (of the order of 10123 states). This size of problem

Yao, Xin

258

PeopleSoft HR ECR Automation Process  

E-Print Network [OSTI]

PeopleSoft HR ECR Automation Process Inquiry Page March 2011 #12;ECR Transaction Inquiry To view a transaction that is in process or already completed, follow the menu navigation below: Home > Employee Change Home > Employee Change Request (ECR) > Inquire > ECR Inquire 5 #12;6 · The Originator is the only one

Huang, Jianyu

259

Review article Automated monitoring of greenhouse crops  

E-Print Network [OSTI]

of the greenhouse. Most of these sensors, such as thermistors and light meters, are reli- able, inexpensive, readilyReview article Automated monitoring of greenhouse crops David L. EHRETa*, Anthony LAUb, Shabtai and continuously detect crop stress, water use, growth and nutrition in greenhouse crops. Some of these techniques

Boyer, Edmond

260

Classified Automated Information System Security Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish uniform requirements, policies, responsibilities, and procedures for the development and implementation of a Department of Energy (DOE) Classified Computer Security Program to ensure the security of classified information in automated data processing (ADP) systems. Cancels DOE O 5637.1. Canceled by DOE O 471.2.

1994-07-15T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Safe controllers design for industrial automation systems  

Science Journals Connector (OSTI)

The design of safe industrial controllers is one of the most important domains related to Automation Systems research. To support it, synthesis and analysis techniques are available. Among the analysis techniques, two of the most important are Simulation ... Keywords: Formal verification, Industrial systems behaviour modelling, Real-time systems, Safe controllers, Simulation

Jos Machado; Eurico Seabra; Jos C. Campos; Filomena Soares; Celina P. Leo

2011-05-01T23:59:59.000Z

262

Sabbath Day Home Automation: "It's Like Mixing Technology and Religion"  

E-Print Network [OSTI]

We present a qualitative study of 20 American Orthodox Jewish families' use of home automation for religious purposes. These lead users offer insight into real-life, long-term experience with home automation technologies. We discuss how automation was seen by participants to contribute to spiritual experience and how participants oriented to the use of automation as a religious custom. We also discuss the relationship of home automation to family life. We draw design implications for the broader population, including surrender of control as a design resource, home technologies that support long-term goals and lifestyle choices, and respite from technology.

Woodruff, Allison; Foucault, Brooke

2007-01-01T23:59:59.000Z

263

Numerical analysis of the influence of inclination angle and wind on the heat losses of cavity receivers for solar thermal power towers  

Science Journals Connector (OSTI)

Abstract The convective heat losses of cavity receivers for solar thermal power towers are of great importance for the overall efficiency of the whole system. However, the influence of wind on these losses has not been studied sufficiently for large scale cavity receivers with different inclination angles. In this present study the impact of head-on and side-on wind on large cavity receivers with inclination angles in the range of 0 (horizontal cavity) to 90 (vertical cavity) is analyzed numerically. The simulation results are compared to data published in literature. When no wind is present the losses decrease considerably with increasing inclination angle of the receiver. In case of a horizontal receiver wind does not have a huge impact on the losses: they remain constant on a high level. In case of an inclined cavity wind increases the heat losses significantly in most of the cases, although the highest absolute value of the losses occurs for the horizontal receiver exposed to head on wind. In some cases, when wind is flowing parallel to the aperture plane, a reduction of the heat losses is observed. The temperature distribution in the cavity is analyzed in order to explain the impact of wind on the heat losses. Wind in general causes a shrinking of the zone with uniform high temperature in the upper region of the cavity, whereas wind flowing parallel to the aperture plane additionally inhibits hot air from leaving the cavity and therefore leads to an increased temperature in the lower zone.

Robert Flesch; Hannes Stadler; Ralf Uhlig; Robert Pitz-Paal

2014-01-01T23:59:59.000Z

264

Synergy of short gamma ray burst and gravitational wave observations: Constraining the inclination angle of the binary and possible implications for off-axis gamma ray bursts  

E-Print Network [OSTI]

Compact binary mergers are the strongest candidates for the progenitors of Short Gamma Ray Bursts (SGRBs). If a gravitational wave (GW) signal from the compact binary merger is observed in association with a SGRB, such a synergy can help us understand many interesting aspects of these bursts. We examine the accuracies with which a world wide network of gravitational wave interferometers would measure the inclination angle (the angle between the angular momentum axis of the binary and the observer's line of sight) of the binary. We compare the projected accuracies of GW detectors to measure the inclination angle of double neutron star (DNS) and neutron star-black hole (NS-BH) binaries for different astrophysical scenarios. We find that a 5 detector network can measure the inclination angle to an accuracy of $\\sim 5.1 (2.2)$ degrees for a DNS(NS-BH) system at 200 Mpc if the direction of the source as well as the redshift is known electromagnetically. We argue as to how an accurate estimation of the inclination angle of the binary can prove to be crucial in understanding off-axis GRBs, the dynamics and the energetics of their jets, and help the searches for (possible) orphan afterglows of the SGRBs.

K. G. Arun; Hideyuki Tagoshi; Chandra Kant Mishra; Archana Pai

2014-12-15T23:59:59.000Z

265

Synergy of short gamma ray burst and gravitational wave observations: Constraining the inclination angle of the binary and possible implications for off-axis gamma ray bursts  

Science Journals Connector (OSTI)

Compact binary mergers are the strongest candidates for the progenitors of short gamma ray bursts (SGRBs). If a gravitational wave signal from the compact binary merger is observed in association with a SGRB, such a synergy can help us understand many interesting aspects of these bursts. We examine the accuracies with which a worldwide network of gravitational wave interferometers would measure the inclination angle (the angle between the angular momentum axis of the binary and the observers line of sight) of the binary. We compare the projected accuracies of gravitational wave detectors to measure the inclination angle of double neutron star and neutron starblack hole binaries for different astrophysical scenarios. We find that a five-detector network can measure the inclination angle to an accuracy of ?5.1 (2.2) deg for a double neutron star (neutron starblack hole) system at 200Mpc if the direction of the source as well as the redshift is known electromagnetically. We argue as to how an accurate estimation of the inclination angle of the binary can prove to be crucial in understanding off-axis GRBs, the dynamics and the energetics of their jets, and help the searches for (possible) orphan afterglows of the SGRBs.

K.?G. Arun; Hideyuki Tagoshi; Archana Pai; Chandra Kant Mishra

2014-07-22T23:59:59.000Z

266

DAVIC - Distributed Energy Automation via Implicit Communication  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DAVIC - Distributed Energy Automation via Implicit Communication DAVIC - Distributed Energy Automation via Implicit Communication Speaker(s): Peter Palensky Date: January 22, 2008 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Peng Xu The electricity grid is seen as a wide-area distributed process, determined by its sub-processes - in our case the loads and distributed generation. Network-based coordination needs to be done very carefully and properly timed to avoid instabilities. Luckily, every point of the grid has the same grid frequency and the same time. Integrating these two trivial things (implicit communication) into one consistent communication model might complement a low-quality (explicit) best-effort communication channel (e.g. Internet, GPRS) for real time applications. A simulation shall clarify how

267

home automation | OpenEI Community  

Open Energy Info (EERE)

91 91 Varnish cache server Home Groups Community Central Green Button Applications Developer Utility Rate FRED: FRee Energy Database More Public Groups Private Groups Features Groups Blog posts Content Stream Documents Discussions Polls Q & A Events Notices My stuff Energy blogs 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142285591 Varnish cache server home automation Home Graham7781's picture Submitted by Graham7781(2002) Super contributor 23 January, 2013 - 13:57 The Consumer Electronics Show round-up CES electronics home automation Las Vegas OpenEI Smart Grid Every January, Las Vegas hosts the Consumer Electronics Show. The CES is the world's largest technology-related trade show. The highlights of this year's show were OLED TVs, ultra-thin laptops,

268

Definition: Automated Voltage Regulators | Open Energy Information  

Open Energy Info (EERE)

Regulators Regulators Jump to: navigation, search Dictionary.png Automated Voltage Regulators Voltage regulators are transformers that can increase or decrease the voltage on a distribution circuit to help keep the voltage within a pre-determined band. Unlike capacitor banks, voltage regulators cannot adjust power factor. These devices typically monitor the voltage at the location where they are connected, and compare it to a programmed set point. If the voltage deviates too far from the set point, the voltage regulator can increase or decrease its output voltage by moving the tap on the secondary side up or down. An automated voltage regulator can operate with remote control signals, or in concert with other area voltage control devices, to help regulate distribution voltage in a coordinated fashion.

269

Automating the development of EBS messages  

SciTech Connect (OSTI)

The State of New Hampshire (NH) had consistently received ARCAs for EBS messages over the years. Unfortunately, NH received a deficiency for information content of an Emergency Broadcast System (EBS) message during the 1993 Vermont Yankee exercise. The easy answer was to conduct training and pass the remedial. However, that would not have solved the problem of too much information to tailor in too little time. NH isn`t the only one with this problem, as evidenced by the 34 deficiencies due to incomplete, inaccurate or late EBS messages from 1991-1993 (1994 data not available at the time this paper was written.) EBS messages account for 46% of all deficiencies according to FEMA. Automation was the real solution. This paper details the development of a computer model that automates the development of EBS messages.

O`Hare, M.J. [Earth Tech., Alexandria, VA (United States); DeLucca, D.

1995-12-31T23:59:59.000Z

270

Automated diagnostic kiosk for diagnosing diseases  

DOE Patents [OSTI]

An automated and autonomous diagnostic apparatus that is capable of dispensing collection vials and collections kits to users interesting in collecting a biological sample and submitting their collected sample contained within a collection vial into the apparatus for automated diagnostic services. The user communicates with the apparatus through a touch-screen monitor. A user is able to enter personnel information into the apparatus including medical history, insurance information, co-payment, and answer a series of questions regarding their illness, which is used to determine the assay most likely to yield a positive result. Remotely-located physicians can communicate with users of the apparatus using video tele-medicine and request specific assays to be performed. The apparatus archives submitted samples for additional testing. Users may receive their assay results electronically. Users may allow the uploading of their diagnoses into a central databank for disease surveillance purposes.

Regan, John Frederick; Birch, James Michael

2014-02-11T23:59:59.000Z

271

Flow through electrode with automated calibration  

DOE Patents [OSTI]

The present invention is an improved automated flow through electrode liquid monitoring system. The automated system has a sample inlet to a sample pump, a sample outlet from the sample pump to at least one flow through electrode with a waste port. At least one computer controls the sample pump and records data from the at least one flow through electrode for a liquid sample. The improvement relies upon (a) at least one source of a calibration sample connected to (b) an injection valve connected to said sample outlet and connected to said source, said injection valve further connected to said at least one flow through electrode, wherein said injection valve is controlled by said computer to select between said liquid sample or said calibration sample. Advantages include improved accuracy because of more frequent calibrations, no additional labor for calibration, no need to remove the flow through electrode(s), and minimal interruption of sampling.

Szecsody, James E [Richland, WA; Williams, Mark D [Richland, WA; Vermeul, Vince R [Richland, WA

2002-08-20T23:59:59.000Z

272

Enhanced training effectiveness using automated student assessment.  

SciTech Connect (OSTI)

Training simulators have become increasingly popular tools for instructing humans on performance in complex environments. However, the question of how to provide individualized and scenario-specific assessment and feedback to students remains largely an open question. In this work, we follow-up on previous evaluations of the Automated Expert Modeling and Automated Student Evaluation (AEMASE) system, which automatically assesses student performance based on observed examples of good and bad performance in a given domain. The current study provides an empirical evaluation of the enhanced training effectiveness achievable with this technology. In particular, we found that students given feedback via the AEMASE-based debrief tool performed significantly better than students given only instructor feedback.

Forsythe, James Chris

2010-05-01T23:59:59.000Z

273

Automated generation of weld path trajectories.  

SciTech Connect (OSTI)

AUTOmated GENeration of Control Programs for Robotic Welding of Ship Structure (AUTOGEN) is software that automates the planning and compiling of control programs for robotic welding of ship structure. The software works by evaluating computer representations of the ship design and the manufacturing plan. Based on this evaluation, AUTOGEN internally identifies and appropriately characterizes each weld. Then it constructs the robot motions necessary to accomplish the welds and determines for each the correct assignment of process control values. AUTOGEN generates these robot control programs completely without manual intervention or edits except to correct wrong or missing input data. Most ship structure assemblies are unique or at best manufactured only a few times. Accordingly, the high cost inherent in all previous methods of preparing complex control programs has made robot welding of ship structures economically unattractive to the U.S. shipbuilding industry. AUTOGEN eliminates the cost of creating robot control programs. With programming costs eliminated, capitalization of robots to weld ship structures becomes economically viable. Robot welding of ship structures will result in reduced ship costs, uniform product quality, and enhanced worker safety. Sandia National Laboratories and Northrop Grumman Ship Systems worked with the National Shipbuilding Research Program to develop a means of automated path and process generation for robotic welding. This effort resulted in the AUTOGEN program, which has successfully demonstrated automated path generation and robot control. Although the current implementation of AUTOGEN is optimized for welding applications, the path and process planning capability has applicability to a number of industrial applications, including painting, riveting, and adhesive delivery.

Sizemore, John M. (Northrop Grumman Ship Systems); Hinman-Sweeney, Elaine Marie; Ames, Arlo Leroy

2003-06-01T23:59:59.000Z

274

Automated genotyping of dinucleotide repeat markers  

SciTech Connect (OSTI)

The dinucleotide repeats (i.e., microsatellites) such as CA-repeats are a highly polymorphic, highly abundant class of PCR-amplifiable markers that have greatly streamlined genetic mapping experimentation. It is expected that over 30,000 such markers (including tri- and tetranucleotide repeats) will be characterized for routine use in the next few years. Since only size determination, and not sequencing, is required to determine alleles, in principle, dinucleotide repeat genotyping is easily performed on electrophoretic gels, and can be automated using DNA sequencers. Unfortunately, PCR stuttering with these markers generates not one band for each allele, but a pattern of bands. Since closely spaced alleles must be disambiguated by human scoring, this poses a key obstacle to full automation. We have developed methods that overcome this obstacle. Our model is that the observed data is generated by arithmetic superposition (i.e., convolution) of multiple allele patterns. By quantitatively measuring the size of each component band, and exploiting the unique stutter pattern associated with each marker, closely spaced alleles can be deconvolved; this unambiguously reconstructs the {open_quotes}true{close_quotes} allele bands, with stutter artifact removed. We used this approach in a system for automated diagnosis of (X-linked) Duchenne muscular dystrophy; four multiplexed CA-repeats within the dystrophin gene were assayed on a DNA sequencer. Our method accurately detected small variations in gel migration that shifted the allele size estimate. In 167 nonmutated alleles, 89% (149/167) showed no size variation, 9% (15/167) showed 1 bp variation, and 2% (3/167) showed 2 bp variation. We are currently developing a library of dinucleotide repeat patterns; together with our deconvolution methods, this library will enable fully automated genotyping of dinucleotide repeats from sizing data.

Perlin, M.W.; Hoffman, E.P. [Carnegie Mellon Univ., Pittsburgh, PA (United States)]|[Univ. of Pittsburgh, PA (United States)

1994-09-01T23:59:59.000Z

275

Automated Microarray Image Analysis Toolbox for MATLAB  

SciTech Connect (OSTI)

The Automated Microarray Image Analysis (AMIA) Toolbox for MATLAB is a flexible, open-source microarray image analysis tool that allows the user to customize analysis of sets of microarray images. This tool provides several methods of identifying and quantify spot statistics, as well as extensive diagnostic statistics and images to identify poor data quality or processing. The open nature of this software allows researchers to understand the algorithms used to provide intensity estimates and to modify them easily if desired.

White, Amanda M.; Daly, Don S.; Willse, Alan R.; Protic, Miroslava; Chandler, Darrell P.

2005-09-01T23:59:59.000Z

276

Algorithms to Automate LCLS Undulator Tuning  

SciTech Connect (OSTI)

Automation of the LCLS undulator tuning offers many advantages to the project. Automation can make a substantial reduction in the amount of time the tuning takes. Undulator tuning is fairly complex and automation can make the final tuning less dependent on the skill of the operator. Also, algorithms are fixed and can be scrutinized and reviewed, as opposed to an individual doing the tuning by hand. This note presents algorithms implemented in a computer program written for LCLS undulator tuning. The LCLS undulators must meet the following specifications. The maximum trajectory walkoff must be less than 5 {micro}m over 10 m. The first field integral must be below 40 x 10{sup -6} Tm. The second field integral must be below 50 x 10{sup -6} Tm{sup 2}. The phase error between the electron motion and the radiation field must be less than 10 degrees in an undulator. The K parameter must have the value of 3.5000 {+-} 0.0005. The phase matching from the break regions into the undulator must be accurate to better than 10 degrees. A phase change of 113 x 2{pi} must take place over a distance of 3.656 m centered on the undulator. Achieving these requirements is the goal of the tuning process. Most of the tuning is done with Hall probe measurements. The field integrals are checked using long coil measurements. An analysis program written in Matlab takes the Hall probe measurements and computes the trajectories, phase errors, K value, etc. The analysis program and its calculation techniques were described in a previous note. In this note, a second Matlab program containing tuning algorithms is described. The algorithms to determine the required number and placement of the shims are discussed in detail. This note describes the operation of a computer program which was written to automate LCLS undulator tuning. The algorithms used to compute the shim sizes and locations are discussed.

Wolf, Zachary

2010-12-03T23:59:59.000Z

277

Field Demonstration of Automated Demand Response for Both Winter and Summer Events in Large Buildings in the Pacific Northwest  

E-Print Network [OSTI]

of fully automated demand response in large facilities,2009). Open Automated Demand Response CommunicationsOpen Automated Demand Response Technology Demonstration

Piette, Mary Ann

2014-01-01T23:59:59.000Z

278

Automated 3D trabecular bone structure analysis of the proximal femurprediction of biomechanical strength by CT and DXA  

E-Print Network [OSTI]

z ORIGINAL ARTICLE Automated 3D trabecular bone structureIntroduction An automated 3D segmentation algorithm wasstudy was to use an automated 3D segmentation algorithm to

2010-01-01T23:59:59.000Z

279

Energy Automation Systems Inc | Open Energy Information  

Open Energy Info (EERE)

Energy Automation Systems Inc Energy Automation Systems Inc Jump to: navigation, search Name Energy Automation Systems Inc. Place Hendersonville, Tennessee Zip 37075 Sector Buildings, Efficiency Product An energy efficiency consultancy firm focusing on analysis of energy consumption in buildings and providing improvments in the efficiency of the distribution system and equipment loads, similar to an ESCO. Coordinates 36.304861°, -86.620214° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":36.304861,"lon":-86.620214,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

280

Automated FMEA based diagnostic symptom generation  

Science Journals Connector (OSTI)

The comprehensive on-board diagnosis of faults in many aerospace and other engineered systems requires real time execution using limited computational resources, and must also provide verifiable behaviour. This paper shows how a diagnostic system satisfying these requirements can be automatically generated from the model based simulation used to produce an automated Failure Modes and Effect Analysis (FMEA). The resulting diagnostic system comprises a set of efficiently evaluated symptoms and their associated faults. The symptoms are complete in that they include all necessary observations required to determine applicable system operating states, unlike other work that finesses this problem by having models for each operating state and producing diagnostics for each operating state separately. The symptoms are also efficient because they abstract complex system behaviour based on observations available to the diagnostic system and only preserve sufficient symptom detail to isolate faults given these available observations. This work has been done in the context of diagnosing autonomous aircraft, and is illustrated with examples from that domain. The models used as a basis for automated generation of diagnostics were originally produced to automate the production of a FMEA report, and the paper also considers the relationship between FMEA and diagnostics that provides verification of the failure effects predicted by the simulation and hence validation of the generated symptoms.

Neal Snooke; Chris Price

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Towards Automated Invocation of Web APIs  

E-Print Network [OSTI]

Abstract. This paper, targeting the large variety of Web APIs, presents an approach towards automated invocation of Web APIs. This approach applies a data schema, to the SAWSDL lowering schema mapping, a grounding mechanism that connects the ontological representations of Web APIs with their execution messages. It is intuitive to existing standard efforts and effective in coping with the heterogeneities witnessed by a majority of Web APIs. 1. Invocation of Linked Web APIs In recent years, the world of service on the Web has witnessed an increasing dominance of Web APIs over classical Web services characterized by WSDL and SOAP [1]. The Semantic Web Service (SWS) community, aiming to increase the level of automation for tasks like discovery, composition and invocation through semantic descriptions, is challenged by the large variety of Web APIs, particularly when it comes to automated invocation. Not only are Web APIs heterogeneous in the forms of elements essential to their invocation, such as address URI, but they also lack machine processable descriptions to address this heterogeneity [1]. hRESTS, a

Ning Li; Carlos Pedrinaci; Jacek Kopecky; Maria Maleshkova; Dong Liu; John Domingue

2011-01-01T23:59:59.000Z

282

V-132: IBM Tivoli System Automation Application Manager Multiple  

Broader source: Energy.gov (indexed) [DOE]

2: IBM Tivoli System Automation Application Manager Multiple 2: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which may affect the product REFERENCE LINKS: Secunia Advisory: SA53006 IBM Security Bulletin 21633991 IBM Security Bulletin 21633992 CVE-2011-3563 CVE-2012-0497 CVE-2012-0498 CVE-2012-0499 CVE-2012-0501

283

V-132: IBM Tivoli System Automation Application Manager Multiple  

Broader source: Energy.gov (indexed) [DOE]

2: IBM Tivoli System Automation Application Manager Multiple 2: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which may affect the product REFERENCE LINKS: Secunia Advisory: SA53006 IBM Security Bulletin 21633991 IBM Security Bulletin 21633992 CVE-2011-3563 CVE-2012-0497 CVE-2012-0498 CVE-2012-0499 CVE-2012-0501

284

Home Network Technologies and Automating Demand Response  

SciTech Connect (OSTI)

Over the past several years, interest in large-scale control of peak energy demand and total consumption has increased. While motivated by a number of factors, this interest has primarily been spurred on the demand side by the increasing cost of energy and, on the supply side by the limited ability of utilities to build sufficient electricity generation capacity to meet unrestrained future demand. To address peak electricity use Demand Response (DR) systems are being proposed to motivate reductions in electricity use through the use of price incentives. DR systems are also be design to shift or curtail energy demand at critical times when the generation, transmission, and distribution systems (i.e. the 'grid') are threatened with instabilities. To be effectively deployed on a large-scale, these proposed DR systems need to be automated. Automation will require robust and efficient data communications infrastructures across geographically dispersed markets. The present availability of widespread Internet connectivity and inexpensive, reliable computing hardware combined with the growing confidence in the capabilities of distributed, application-level communications protocols suggests that now is the time for designing and deploying practical systems. Centralized computer systems that are capable of providing continuous signals to automate customers reduction of power demand, are known as Demand Response Automation Servers (DRAS). The deployment of prototype DRAS systems has already begun - with most initial deployments targeting large commercial and industrial (C & I) customers. An examination of the current overall energy consumption by economic sector shows that the C & I market is responsible for roughly half of all energy consumption in the US. On a per customer basis, large C & I customers clearly have the most to offer - and to gain - by participating in DR programs to reduce peak demand. And, by concentrating on a small number of relatively sophisticated energy consumers, it has been possible to improve the DR 'state of the art' with a manageable commitment of technical resources on both the utility and consumer side. Although numerous C & I DR applications of a DRAS infrastructure are still in either prototype or early production phases, these early attempts at automating DR have been notably successful for both utilities and C & I customers. Several factors have strongly contributed to this success and will be discussed below. These successes have motivated utilities and regulators to look closely at how DR programs can be expanded to encompass the remaining (roughly) half of the state's energy load - the light commercial and, in numerical terms, the more important residential customer market. This survey examines technical issues facing the implementation of automated DR in the residential environment. In particular, we will look at the potential role of home automation networks in implementing wide-scale DR systems that communicate directly to individual residences.

McParland, Charles

2009-12-01T23:59:59.000Z

285

Automated two column generator systems for medical radionuclides  

Science Journals Connector (OSTI)

This work describes automated chromatographic methods for the separation of medically useful radionuclides from source material containing their parent radionuclides. The separation techniques employ two chromatographic columns to ensure high chemical and radiochemical purity of the product radionuclide. The separations were performed using an automated system, the automated radionuclide separator (ARS2), consisting of syringe pumps and multiport valves controlled through a computer interface. Generator systems for 68Ga, 99mTc, 188Re and 213Bi will be described.

Daniel R. McAlister; E. Philip Horwitz

2009-01-01T23:59:59.000Z

286

Definition: Automated Islanding And Reconnection | Open Energy Information  

Open Energy Info (EERE)

Islanding And Reconnection Islanding And Reconnection Jump to: navigation, search Dictionary.png Automated Islanding And Reconnection Automated Islanding and Reconnection Automated islanding and reconnection is achieved by automated separation and subsequent reconnection (autonomous synchronization) of an independently operated portion of the T&D system (i.e., microgrid) from the interconnected electric grid. A microgrid is an integrated energy system consisting of interconnected loads and distributed energy resources which, as an integrated system, can operate in parallel with the grid or as an island.[1] View on Wikipedia Wikipedia Definition Islanding refers to the condition in which a distributed (DG) generator continues to power a location even though electrical grid power

287

Xlink-Identifier: An Automated Data Analysis Platform for Confident...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Chemically Cross-linked Peptides using Xlink-Identifier: An Automated Data Analysis Platform for Confident Identifications of Chemically Cross-linked Peptides using Abstract:...

288

Fueling Robot Automates Hydrogen Hose Reliability Testing (Fact...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Automated robot mimics fueling action to test hydrogen hoses for durability in real-world conditions. With at least three major auto manufacturers expected to release fuel cell...

289

Automated data extraction from in situ protein stable isotope...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

data extraction from in situ protein stable isotope probing studies. Automated data extraction from in situ protein stable isotope probing studies. Abstract: Protein stable isotope...

290

Automated Office Systems Support (AOSS) Quality Assurance Model...  

Broader source: Energy.gov (indexed) [DOE]

assurance model, including checklists, for activity relative to network and desktop computer support. Automated Office Systems Support (AOSS) Quality Assurance Model More...

291

Automation of Treebank Annotation Thorsten Brants and Wojciech Skut  

E-Print Network [OSTI]

Thorsten Brants and Wojciech Skut (1998) Automation of Treebank Annotation. In D.M.W. Powers (ed.) NeMLaP3

292

Automated Demand Response Benefits California Utilities and Commercial...  

Broader source: Energy.gov (indexed) [DOE]

. U.S. Department of Energy |September 2014 Automated Demand Response Benefits California Utilities and Commercial & Industrial Customers Page 1 Under the American Recovery and...

293

Linking Continuous Energy Management and Open Automated Demand Response  

E-Print Network [OSTI]

A. Barat, D. Watson. Demand Response Spinning ReserveOpen Automated Demand Response Communication Standards:Dynamic Controls for Demand Response in a New Commercial

Piette, Mary Ann

2009-01-01T23:59:59.000Z

294

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network [OSTI]

reliability signals for demand response GTA HTTPS HVAC IT kWand Commissioning Automated Demand Response Systems. and Techniques for Demand Response. California Energy

Kiliccote, Sila

2010-01-01T23:59:59.000Z

295

Direct versus Facility Centric Load Control for Automated Demand Response  

E-Print Network [OSTI]

Interoperable Automated Demand Response Infrastructure.and Techniques for Demand Response. LBNL Report 59975. Mayand Communications for Demand Response and Energy Efficiency

Piette, Mary Ann

2010-01-01T23:59:59.000Z

296

UNIVERSITY OF CALIFORNIA, SAN DIEGO Automated Feature Design...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Proc. Proceedings of International Workshop on Structural Health Monitoring, Palo Alto, California. 2013. D.Y. Harvey, M.D. Todd, Automated extraction of damage features...

297

Substation automation systems and IEC 61850: interoperability testing.  

E-Print Network [OSTI]

??Dissertao de mest., Engenharia Electrnica e Telecomunicaes, Faculdade de Cincias e Tecnologia, Univ. do Algarve, 2011 The Substation Automation System (SAS) is the backbone of (more)

Evaristo, Henrique A. Guerreiro Dias

2011-01-01T23:59:59.000Z

298

automated segmentation algorithm: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tumor Segmentation using two MRI Modalities Mohamed Ben Salah1 , Idanis Diaz1 automated brain tumor segmentation from only two magnetic resonance image modalities. The technique...

299

Towards Automated Story Analysis Using Participatory Harry Halpin  

E-Print Network [OSTI]

Towards Automated Story Analysis Using Participatory Design Harry Halpin Institute University of Edinburgh 2 Buccleuch Place Edinburgh, UK J.Moore@ed.ac.uk Judy Robertson Human Communications

Moore, Johanna D.

300

An automated testing system for telephony software - A case study.  

E-Print Network [OSTI]

??As the complexity of software system increases, delivering quality software successfully becomes an ever more challenging task. Applying automated testing techniques effectively to the software (more)

Zhou, Yingxiang Ingrid

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Global health response more accurate with automated influenza...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Global health response more accurate with automated influenza surveillance Public health officials will be able to determine whether an outbreak of an infectious disease comes from...

302

ITU G.hn Concept and Home Automation  

Science Journals Connector (OSTI)

For long time, many in the buildings industry have been looking for a day when home automation systems would become fully integrated with communication...

Manfred Schneps-Schneppe

2009-01-01T23:59:59.000Z

303

PaR-PaR Laboratory Automation Platform  

Science Journals Connector (OSTI)

Since more time and effort is often required to instruct a robot to perform a new task than the robot saves a researcher by performing the task, researchers can only effectively automate a small fraction of their workflows. ... As the biological design/implementation process becomes increasingly software-automated,(10-26) achieving this ideal will become increasingly important so that researchers across laboratories with different robotics platforms can all benefit from design automation software innovations. ... By automating the design of DNA fabrication schemes using computational algorithms, we can eliminate human error while reducing redundant operations, thus minimizing the time and cost required for conducting biol. ...

Gregory Linshiz; Nina Stawski; Sean Poust; Changhao Bi; Jay D. Keasling; Nathan J. Hillson

2012-10-04T23:59:59.000Z

304

Assessment of the Current Level of Automation in the Manufacture...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Assessment of the Current Level of Automation in the Manufacture of Fuel Cell Systems for Combined Heat and Power Applications Michael Ulsh National Renewable Energy Laboratory...

305

Individual differences in the calibration of trust in automation.  

E-Print Network [OSTI]

??A large body of research has identified that one of the major factors influencing decisions about automation use is operator's trust. Studies have shown that (more)

Pop, Vlad Liviu

2013-01-01T23:59:59.000Z

306

Electrically calibrated absolute radiometer suitable for measurement automation  

Science Journals Connector (OSTI)

New electrically calibrated absolute radiometers (ESRs) were developed having fast response and high responsivity; these ESRs are specially useful for measurement automation. They are...

Boivin, Louis-Philippe; McNeely, Francis T

1986-01-01T23:59:59.000Z

307

Lean Automation: Combining Lean with Industrial Robotics in Real Examples.  

E-Print Network [OSTI]

?? The purpose of this report is to analyze whether we can have a better automation manufacturing using lean solutions. First, this report is started (more)

Delkhosh, Ali

2012-01-01T23:59:59.000Z

308

AUTOMATION IN THE MEAT INDUSTRY | Cutting and Boning  

Science Journals Connector (OSTI)

Abstract The strongest incentives for the industry to adopt automation technology for cutting and boning relate to the drive for improved productivity through reduced labor. Also work environment, increased yield and adaptability to a wide range of customer specifications are important drivers. Automation in the pig meat industry has mainly been adopted in regions with high labor costs such as Northern Europe. In New Zealand the ovine meat industry has been progressive in developing and using automation technology. Automation in the beef industry is limited because of the complexity associated with handling of the size and biological variation of the material.

R. Clarke; J.U. Nielsen; N.T. Madsen

2014-01-01T23:59:59.000Z

309

Automation to Support Risk Assessment and Management at DHS  

Science Journals Connector (OSTI)

DHS is pursuing a portfolio of research and development projects known as the Threat Assessment Portfolio, conducting a range of cross-cutting analytic automation research to address...

Dennis, Stephen

310

Examining the Process of Automation Development and Deployment.  

E-Print Network [OSTI]

??In order to develop a better understanding of the process of development and deployment of automated systems, this thesis examines aspects of project execution and (more)

Barsalou, Edward

2006-01-01T23:59:59.000Z

311

Fully Automated Radiation Hardened by Design Circuit Construction.  

E-Print Network [OSTI]

??A fully automated logic design methodology for radiation hardened by design (RHBD) high speed logic using fine grained triple modular redundancy (TMR) is presented. The (more)

Hindman, Nathan David

2012-01-01T23:59:59.000Z

312

Automation of Nested Matrix and Derivative Operations Robert Kalaba  

E-Print Network [OSTI]

Automation of Nested Matrix and Derivative Operations Robert Kalaba Departments of Electrical of expressions involving nested matrix and derivative operations. The need to differentiate such expressions

Tesfatsion, Leigh

313

IEEE Transactions on Automation Science and Engineering Compensation of Scanner Creep and Hysteresis  

E-Print Network [OSTI]

IEEE Transactions on Automation Science and Engineering Compensation of Scanner Creep uncertainties associated with creep and hysteresis, and supports automated, computer-controlled manipulation) and by automation, which bypasses the time- consuming

Southern California, University of

314

From automation to tangible interactive objects  

Science Journals Connector (OSTI)

Abstract Automation led to many innovations for a long time, most of them were developed during the twentieth century. It was commonly thought as a layer on top of a mechanical system. It promoted system management over low-level control. The more information technology evolves, the more it takes a fundamental part in our lives. This article describes a paradigm shift where automation will no longer be an add-on, and where software supports the definition, implementation and operationalization of functions and structures of products from the beginning of the design process. Any design today starts by using computer-aided design tools that enable us to easily draw, modify and fine-tune any kind of system. We can fully develop an airplane and literally fly it as a complex piece of software. Usability and usefulness can be tested before anything physical is built. Consequently, human-centered design (HCD) is now not only feasible but also can drive the overall engineering of products. We have started to design products from outside in, i.e., from usages and purposes to means. We even can 3D print mechanical parts from the software-designed parts with ease. In humancomputer interaction, specific research efforts are carried out on tangible objects, which define this inverted view of automation. We now design and develop by using information technology to do mechanical things, and therefore redefine the essence of a new kind of cognitive mechanical engineering. This article is about the revolution that is currently happening in engineering and industrial design due to the immersive influence of computers in our everyday life, and the expansion of HCD.

Guy Andr Boy

2014-01-01T23:59:59.000Z

315

An automated vacuum gauge calibration system  

SciTech Connect (OSTI)

An automated system for calibrating vacuum gauges over the pressure range of 10{sup {minus}6} to 0.1 Pa was designed and constructed at the National Institute of Standards and Technology (NIST) for the Department of Energy (DOE) Primary Standards Laboratory at Sandia National Laboratories (SNL). Calculable pressures are generated by passing a known flow of gas through an orifice of known conductance. The orifice conductance is derived from dimensional measurements and accurate flows are generated using metal capillary leaks. The expanded uncertainty (k = 2) in the generated pressure is estimated to be between 1% and 4% over the calibration range. The design, calibration results. and component uncertainties will be discussed.

Abbott, P.J. [NIST, GAithersburg, MD (United States); Benner, M.S. [Sandia National Labs., Albuquerque, NM (United States)

1998-04-01T23:59:59.000Z

316

Automated Knowledge Annotation for Dynamic Collaborative Environments  

SciTech Connect (OSTI)

This paper describes the Knowledge Encapsulation Framework (KEF), a suite of tools to enable automated knowledge annotation for modeling and simulation projects. This framework can be used to capture evidence (e.g., facts extracted from journal articles and government reports), discover new evidence (from similar peer-reviewed material as well as social media), enable discussions surrounding domain-specific topics and provide automatically generated semantic annotations for improved corpus investigation. The current KEF implementation is presented within a wiki environment, providing a simple but powerful collaborative space for team members to review, annotate, discuss and align evidence with their modeling frameworks.

Cowell, Andrew J.; Gregory, Michelle L.; Marshall, Eric J.; McGrath, Liam R.

2009-05-19T23:59:59.000Z

317

Automated inspection of hot steel slabs  

DOE Patents [OSTI]

The disclosure relates to a real time digital image enhancement system for performing the image enhancement segmentation processing required for a real time automated system for detecting and classifying surface imperfections in hot steel slabs. The system provides for simultaneous execution of edge detection processing and intensity threshold processing in parallel on the same image data produced by a sensor device such as a scanning camera. The results of each process are utilized to validate the results of the other process and a resulting image is generated that contains only corresponding segmentation that is produced by both processes.

Martin, Ronald J. (Burnsville, MN)

1985-01-01T23:59:59.000Z

318

Honeywell Modular Automation System Computer Software Documentation  

SciTech Connect (OSTI)

The purpose of this Computer Software Document (CSWD) is to provide configuration control of the Honeywell Modular Automation System (MAS) in use at the Plutonium Finishing Plant (PFP). This CSWD describes hardware and PFP developed software for control of stabilization furnaces. The Honeywell software can generate configuration reports for the developed control software. These reports are described in the following section and are attached as addendum's. This plan applies to PFP Engineering Manager, Thermal Stabilization Cognizant Engineers, and the Shift Technical Advisors responsible for the Honeywell MAS software/hardware and administration of the Honeywell System.

STUBBS, A.M.

2000-12-04T23:59:59.000Z

319

Fully Automated Calculations in the complex MSSM  

E-Print Network [OSTI]

We review recent progress towards automated higher-order calculations in the MSSM with complex parameters (cMSSM). The consistent renormalization of all relevant sectors of the cMSSM and the inclusion into the FeynArts/FormCalc framework has recently been completed. Some example calculations applying this framework are briefly discussed. These include two-loop corrections to cMSSM Higgs boson masses as well as partial decay widths of electroweak supersymmetric particles decaying into a Higgs boson and another supersymmetric particle.

Hahn, T; von der Pahlen, F; Rzehak, H; Schappacher, C

2014-01-01T23:59:59.000Z

320

Fully Automated Calculations in the complex MSSM  

E-Print Network [OSTI]

We review recent progress towards automated higher-order calculations in the MSSM with complex parameters (cMSSM). The consistent renormalization of all relevant sectors of the cMSSM and the inclusion into the FeynArts/FormCalc framework has recently been completed. Some example calculations applying this framework are briefly discussed. These include two-loop corrections to cMSSM Higgs boson masses as well as partial decay widths of electroweak supersymmetric particles decaying into a Higgs boson and another supersymmetric particle.

T. Hahn; S. Heinemeyer; F. von der Pahlen; H. Rzehak; C. Schappacher

2014-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Automating the POWHEG method in Sherpa  

E-Print Network [OSTI]

A new implementation of the POWHEG method into the Monte-Carlo event generator Sherpa is presented, focusing on processes with a simple colour structure. Results for a variety of processes, namely e+e- to hadrons, deep-inelastic lepton-nucleon scattering, hadroproduction of single vector bosons and of vector boson pairs as well as the production of Higgs bosons in gluon fusion serve as test cases for the successful realisation. The algorithm is fully automated such that for further processes only virtual matrix elements need to be included.

Stefan Hoeche; Frank Krauss; Marek Schonherr; Frank Siegert

2010-08-31T23:59:59.000Z

322

Automation of one-loop QCD corrections  

E-Print Network [OSTI]

We present the complete automation of the computation of one-loop QCD corrections, including UV renormalization, to an arbitrary scattering process in the Standard Model. This is achieved by embedding the OPP integrand reduction technique, as implemented in CutTools, into the MadGraph framework. By interfacing the tool so constructed, which we dub MadLoop, with MadFKS, the fully automatic computation of any infrared-safe observable at the next-to-leading order in QCD is attained. We demonstrate the flexibility and the reach of our method by calculating the production rates for a variety of processes at the 7 TeV LHC.

Valentin Hirschi; Rikkert Frederix; Stefano Frixione; Maria Vittoria Garzelli; Fabio Maltoni; Roberto Pittau

2011-03-03T23:59:59.000Z

323

Automated macromolecular crystal detection system and method  

DOE Patents [OSTI]

An automated macromolecular method and system for detecting crystals in two-dimensional images, such as light microscopy images obtained from an array of crystallization screens. Edges are detected from the images by identifying local maxima of a phase congruency-based function associated with each image. The detected edges are segmented into discrete line segments, which are subsequently geometrically evaluated with respect to each other to identify any crystal-like qualities such as, for example, parallel lines, facing each other, similarity in length, and relative proximity. And from the evaluation a determination is made as to whether crystals are present in each image.

Christian, Allen T. (Tracy, CA); Segelke, Brent (San Ramon, CA); Rupp, Bernard (Livermore, CA); Toppani, Dominique (Fontainebleau, FR)

2007-06-05T23:59:59.000Z

324

Evaluatoni of Automated Utility Bill Calibration Methods  

Broader source: Energy.gov (indexed) [DOE]

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. Evaluation of Automated Utility Bill Calibration Methods BA Technical Update Meeting Ben Polly, Joe Robertson 04/30/13 Utility Bill Calibration * "Calibrate" or "true-up" building energy models to utility bill data to increase the accuracy of retrofit savings predictions * Calibration methods typically involve adjusting input parameters * Predict retrofit savings using the adjusted (calibrated) model 2 Background: BESTEST-EX * BESTEST-EX is a suite for testing calibration methods and retrofit savings predictions associated with audit software * Field trials showed that:

325

Film cooling performance and heat transfer over an inclined film-cooled surface at different divergent angles with respect to highly turbulent mainstream  

SciTech Connect (OSTI)

Experiments have been performed to study and obtain the adiabatic wall film cooling effectiveness and the heat transfer over a film-cooled surface that is made inclined at various angles with respect to a highly turbulent flow. The vertical temperature distribution was measured to infer the flow structure and the rate of mixing of film jet with the freestream. The freestream turbulence intensity is controlled to range from 1.0% to 26.4%, the inclination or the divergent angle of the film-cooled surface ranges from 0 to 20 , the blowing parameter from 0.5 to 2.0. It is found that the mixing of the film jet with the freestream is significantly enhanced by both the freestream turbulence intensity and the divergent angle of the film-cooled surface, which leads to the decrease in the film cooling effectiveness and the increase in the heat transfer. However, the inclination angle has more effect on the film cooling performance while the turbulence intensity has more effect on the heat transfer under the film. More detailed discussion is presented. Correlations for both the film cooling effectiveness and the heat transfer under the film-cooled surface have been very successful and are provided. (author)

Yang, Chih-Sheng [Department of Computer Science and Information Engineering Far East University (China); Lin, C.L.; Gau, C. [Institute of Aeronautics and Astronautics, Center for Micro/Nano Science and Technology, National Cheng Kung University, Tainan 70101 (China)

2008-05-15T23:59:59.000Z

326

Automated Price and Demand Response Demonstration for Large Customers in New York City using OpenADR  

E-Print Network [OSTI]

2009. Open Automated Demand Response Communications2010. Open Automated Demand Response Technologies forenergy efficiency and demand response: Framework concepts

Kim, Joyce Jihyun

2014-01-01T23:59:59.000Z

327

E-Print Network 3.0 - automated software packages Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Michele Lanza Summary: is providing a way to automate the package characterization process. To ad- dress this challenge, we propose... that automate the package patterns...

328

E-Print Network 3.0 - automated quantitative analysis Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

as they gather critical information, and explores the use of automation to increase the efficiency... organizations automate reporting and measurement to improve project, program...

329

E-Print Network 3.0 - automated sequential tilt-series Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Integration of Stored and Real-time Information Automating COA... eCOA Evaluation Automated Scenario Generation Generic EBO Modeling Capability EBO Simulation...

330

E-Print Network 3.0 - automated sequence analysis Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Integration of Stored and Real-time Information Automating COA... eCOA Evaluation Automated Scenario Generation Generic EBO Modeling Capability EBO Simulation...

331

E-Print Network 3.0 - automated structure evaluation Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Integration of Stored and Real-time Information Automating COA... eCOA Evaluation Automated Scenario Generation Generic EBO Modeling Capability EBO Simulation...

332

E-Print Network 3.0 - automated sample preparation Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technologies and Information Sciences ; Engineering ; Mathematics 50 THE RABIT: A RAPID AUTOMATED BIODOSIMETRY TOOL FOR RADIOLOGICAL TRIAGE Summary: automated, from the...

333

E-Print Network 3.0 - automated systems based Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

automation and human tasks in complex systems. The methodology will be based on formal modeling, simulation... design of complex systems, including design of the automation and...

334

Design and Implementation of an Open, Interoperable Automated Demand Response Infrastructure  

E-Print Network [OSTI]

of Fully Automated Demand Response in Large Facilities. CEC-Fully Automated Demand Response Tests in Large Facilities.Management and Demand Response in Commercial Building. ,

Piette, Mary Ann; Kiliccote, Sila; Ghatikar, Girish

2008-01-01T23:59:59.000Z

335

Demand Response and Open Automated Demand Response Opportunities for Data Centers  

E-Print Network [OSTI]

Standardized Automated Demand Response Signals. Presented atand Automated Demand Response in Industrial RefrigeratedActions for Industrial Demand Response in California. LBNL-

Mares, K.C.

2010-01-01T23:59:59.000Z

336

The Study of Substation Automation Remote Communication for Multi-granularity Access Control System  

Science Journals Connector (OSTI)

This paper based on the demands of access control of substation automation system, analyzed two operation objects of ... can fulfill the needs of access control in substation automation.

Lichun Shi; Haimei Xiao

2012-01-01T23:59:59.000Z

337

E-Print Network 3.0 - automating information extraction Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Automated Service Quality: A Confirmatory Factor Analysis Approach Mohammed Al... -Hawari, Nicole Hartley and Tony Ward Automated service quality has been recognised as the...

338

E-Print Network 3.0 - automated information extraction Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Automated Service Quality: A Confirmatory Factor Analysis Approach Mohammed Al... -Hawari, Nicole Hartley and Tony Ward Automated service quality has been recognised as the...

339

E-Print Network 3.0 - automated contract time Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Contracts with Myopic and Strategic Agents Summary: order basis by automated contracting. Such automationcan save labor time of human negotiators... In automated...

340

E-Print Network 3.0 - automated test system Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Powered by Explorit Topic List Advanced Search Sample search results for: automated test system Page: << < 1 2 3 4 5 > >> 1 Automated Software System Analysis and Testing...

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

E-Print Network 3.0 - automated white-matter tractography Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: diffusion coefficient (ADC). 2) Automated or semi-automated methods for whole brain tractography where seed... of white matter abnormality. 6) Integration of functional...

342

E-Print Network 3.0 - automated optical inspection Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TOPICS IN QUANTUM ELECTRONICS, VOL. 10, NO. 3, MAYJUNE 2004 445 Model-Based Optoelectronic Packaging Automation Summary: , photonic automation. I. INTRODUCTION THE current...

343

E-Print Network 3.0 - automated critical peak Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TOPICS IN QUANTUM ELECTRONICS, VOL. 10, NO. 3, MAYJUNE 2004 445 Model-Based Optoelectronic Packaging Automation Summary: increase the speed of the automation process, a...

344

E-Print Network 3.0 - automated pre-ejection period Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

activity is focused on automated approaches to security. With these approaches, security decisions... automation is potentially beneficial in theory, in practice it is not a...

345

E-Print Network 3.0 - automated aircraft conflict Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Automation System ... Source: NASA - Center-TRACTION Automation System (CTAS) Collection: Energy Storage, Conversion and Utilization 2 Eighth USAEurope Air Traffic Management...

346

Department of Mechanical and Nuclear Engineering Spring 2011 Wind Tunnel Automation Project  

E-Print Network [OSTI]

PENNSTATE Department of Mechanical and Nuclear Engineering Spring 2011 Wind Tunnel Automation Project Phase II - Automated Bike Turret Mount Overview SYNERGE LLC is a consulting company working

Demirel, Melik C.

347

An Extended Process Automation System: An Approach Based on a Multi-Agent System.  

E-Print Network [OSTI]

??This thesis describes studies on application of multi-agent systems (acronym: MAS) to enhance process automation systems. A specification of an extended process automation system is (more)

Seilonen, Ilkka

2006-01-01T23:59:59.000Z

348

PROCESS AUTOMATION CRITERIA IDENTIFICATION AND SELECTION: A CASE STUDY IN A PAYROLL COMPANY.  

E-Print Network [OSTI]

??This research is intended to provide insights to managers making decisions on automation. With the objective of investigating criteria for business process automation, the research (more)

Yi, Fuyu

2009-01-01T23:59:59.000Z

349

E-Print Network 3.0 - automating instructional design Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for Automated Generation of Assembly Instructions Summary: for the creation and automation of visual instructions. Designing effective instructions for everyday products... of...

350

E-Print Network 3.0 - automated paging system Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

which ensue. In an adaptive system, by contrast, the flexibility in information or automation behavior... and performance automation subsystems in an adaptive system, but which...

351

An extended process automation system : an approach based on a multi-agent system.  

E-Print Network [OSTI]

??This thesis describes studies on application of multi-agent systems (acronym: MAS) to enhance process automation systems. A specification of an extended process automation system is (more)

Seilonen, Ilkka

2006-01-01T23:59:59.000Z

352

E-Print Network 3.0 - automated knowledge discovery Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Principles of Automated Theorem... proving, Wiley (1991) W.BIBEL, Deduction, Automated Logic, Academic press (1993) ... Source: Pastre, Dominique - UFR de Mathmatiques et...

353

E-Print Network 3.0 - automated service composition Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

satisfaction of Summary: -driven tool for experiment automation (Weevil) Designing a web service composition to evaluate... UROP 2010 Automated Services Management over...

354

HIGHER-ORDER MODELING AND AUTOMATED DESIGN-SPACE EXPLORATION  

E-Print Network [OSTI]

the second requires the exis- tence of an automated process for design space exploration. There are many waysHIGHER-ORDER MODELING AND AUTOMATED DESIGN-SPACE EXPLORATION J¨orn W. Janneck EECS Department exploration, exploratory simula- tion, performance evaluation, higher-order models ABSTRACT An important part

Esser, Robert

355

Automated Stellar Spectral Classification and Parameterization for the Masses  

E-Print Network [OSTI]

Stellar spectroscopic classification has been successfully automated by a number of groups. Automated classification and parameterization work best when applied to a homogeneous data set, and thus these techniques primarily have been developed for and applied to large surveys. While most ongoing large spectroscopic surveys target extragalactic objects, many stellar spectra have been and will be obtained. We briefly summarize past work on automated classification and parameterization, with emphasis on the work done in our group. Accurate automated classification in the spectral type domain and parameterization in the temperature domain have been relatively easy. Automated parameterization in the metallicity domain, formally outside the MK system, has also been effective. Due to the subtle effects on the spectrum, automated classification in the luminosity domain has been somewhat more difficult, but still successful. In order to extend the use of automated techniques beyond a few surveys, we present our current efforts at building a web-based automated stellar spectroscopic classification and parameterization machine. Our proposed machinery would provide users with MK classifications as well as the astrophysical parameters of effective temperature, surface gravity, mean abundance, abundance anomalies, and microturbulence.

Ted von Hippel; Carlos Allende Prieto; Chris Sneden

2002-08-08T23:59:59.000Z

356

16.459 Humans & Automation Seminar February 6, 2002  

E-Print Network [OSTI]

simulations Automated bank teller system design ACT-R Modeling problem solving and learning Various problem ­ To provide rapid prototype simulator to examine human operator performance as a function of human interface16.459 Humans & Automation Seminar February 6, 2002 Miwa Hayashi #12;!Human-Machine System Design

Goldwasser, Shafi

357

Gender-Sensitive Automated Negotiators Ron Katz and Sarit Kraus  

E-Print Network [OSTI]

Gender-Sensitive Automated Negotiators Ron Katz and Sarit Kraus Department of Computer Science This paper introduces an innovative approach for automated negotiating using the gender of human opponents, and models the typical behavior of males and of females. The two models are used in order to match an optimal

Kraus, Sarit

358

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways #  

E-Print Network [OSTI]

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways # Alain Girault a a Inria the problem of the hybrid control of autonomous vehicles driving on automated highways. Vehicles of their merging lane. Finally, we show the outcome of a highway microsimulation modelled after the Katy Corridor

Girault, Alain

359

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways  

E-Print Network [OSTI]

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways Alain Girault a aInria Rh of the hybrid control of autonomous vehicles driving on automated highways. Vehicles are autonomous, so they do. Finally, we show the outcome of a highway microsimulation modelled after the Katy Corridor near Houston

Girault, Alain

360

Design and Control of a Fully Automated Vehicle door  

E-Print Network [OSTI]

The objective of the research was to develop a fully automated vehicle car door that can detect any object obstructing its path during operation. A fully automated door concept has not yet been implemented in the car industry. The door, operated via...

Hong, Kyung-Min

2010-07-14T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Fast Automated Demand Response to Enable the Integration of Renewable  

E-Print Network [OSTI]

LBNL-5555E Fast Automated Demand Response to Enable the Integration of Renewable Resources David S The work described in this report was coordinated by the Demand Response Research Center and funded ABSTRACT This study examines how fast automated demand response (AutoDR) can help mitigate grid balancing

362

End User Impacts of Automated Electrochromic Windows in a Pilot  

E-Print Network [OSTI]

LBNL-6027E End User Impacts of Automated Electrochromic Windows in a Pilot Retrofit Application E Electrochromic Windows in a Pilot Retrofit Application Eleanor S. Lee1 Abstract , Erin S. Claybaugh Building Independence Avenue, S.W., Washington, DC 20585 USA Automated electrochromic (EC) windows, advanced thermally

363

Generic planning and control of automated material handling systems  

Science Journals Connector (OSTI)

This paper discusses the problem to design a generic planning and control architecture for automated material handling systems (AMHSs). We illustrate the relevance of this research direction, and then address three different market sectors where AMHSs ... Keywords: Automated material handling systems, Generic control architecture, Real-time scheduling

S. W. A. Haneyah; J. M. J. Schutten; P. C. Schuur; W. H. M. Zijm

2013-04-01T23:59:59.000Z

364

Trainable, Vision-Based Automated Home Cage Behavioral Phenotyping  

E-Print Network [OSTI]

Trainable, Vision-Based Automated Home Cage Behavioral Phenotyping Hueihan Jhuang hueihan computer vision system enabling the automated analysis of complex mouse behaviors. Our system computes of the system, we characterized the home cage behaviors of two standard inbred and two non- standard mouse

Poggio, Tomaso

365

Medical and Home automation Sensor Networks for Senior Citizens Telehomecare  

E-Print Network [OSTI]

Medical and Home automation Sensor Networks for Senior Citizens Telehomecare Shahram Nourizadeh1, 2 Healthcare, Smart Home, Distributed health record, Actimetry, Fuzzy logic, Home automation I. INTRODUCTION.Deroussent}@medetic.com Abstract- This paper presents a home Tele-healthcare system for the senior citizens. The system uses home

Paris-Sud XI, Université de

366

A robust automated system elucidates mouse home cage behavioral structure  

E-Print Network [OSTI]

A robust automated system elucidates mouse home cage behavioral structure Evan H. Gouldinga,1 , A of behavior exhibited by mice in their home cages reflect the function and interaction of numerous behavioral of organization across diverse behaviors has been difficult to achieve and automate. Here, we describe

Jiggins, Francis

367

Automated Self-Assembly Programming Paradigm: A Particle Swarm Realization  

E-Print Network [OSTI]

Automated Self-Assembly Programming Paradigm: A Particle Swarm Realization Lin Li, Natalio Automated Self-Assembly Programming Para- digm (ASAP2 ). We investigated how external environment settings affect population diversity and software self-assembly efficiency. In this paper, we introduce

Aickelin, Uwe

368

Saying What it Means: Semi-Automated (News) Media Annotation  

Science Journals Connector (OSTI)

This paper considers the automated and semi-automated annotation of audiovisual media in a new type of production framework, A4SM (Authoring System for Syntactic, Semantic and Semiotic Modelling). We present ... Keywords: MPEG-7, XML-Schema, media annotation, media production, news production, news production tools

Frank Nack; Wolfgang Putz

2004-03-01T23:59:59.000Z

369

Automation of Calibration System for Dark Energy Survey  

E-Print Network [OSTI]

Automation of Calibration System for Dark Energy Survey Jason Wise1, J. P. Rheault1, D. L. DePoy1 1 from gravitational interactions. The Dark Energy Survey (DES) is a sky survey designed to find. Abstract DECalS is a fully automated remote control program for the Dark Energy Survey spectrophotometric

370

AUTOMATION OF ENERGY DEMAND FORECASTING Sanzad Siddique, B.S.  

E-Print Network [OSTI]

AUTOMATION OF ENERGY DEMAND FORECASTING by Sanzad Siddique, B.S. A Thesis submitted to the Faculty OF ENERGY DEMAND FORECASTING Sanzad Siddique, B.S. Marquette University, 2013 Automation of energy demand of the energy demand forecasting are achieved by integrating nonlinear transformations within the models

Povinelli, Richard J.

371

Building Technologies Office: Small- and Medium-Sized Building Automation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Small- and Medium-Sized Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project to someone by E-mail Share Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Facebook Tweet about Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Twitter Bookmark Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Google Bookmark Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Delicious Rank Building Technologies Office: Small- and Medium-Sized Building

372

ISA Approves Standard for Wireless Automation in Process Control  

Broader source: Energy.gov (indexed) [DOE]

ISA Approves Standard for Wireless Automation in Process Control ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications September 22, 2009 - 1:28pm Addthis September 22, 2009 On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. The standard is intended to provide secure, reliable wireless operation for monitoring, alerting, and control applications. It enables robustness with non-ISA-compliant legacy wireless systems, coexistence and interoperability with other wireless devices, and robustness in harsh industrial

373

Reference Model for Control and Automation Systems in Electrical Power |  

Broader source: Energy.gov (indexed) [DOE]

Model for Control and Automation Systems in Electrical Model for Control and Automation Systems in Electrical Power Reference Model for Control and Automation Systems in Electrical Power Modern infrastructure automation systems are threatened by cyber attack. Their higher visibility in recent years and the increasing use of modern information technology (IT) components contribute to increased security risk. A means of analyzing these infrastructure automation systems is needed to help understand and study the many system relationships that affect the overall security of the system. Modeling these systems is a very cost effective means of addressing the problem of security from an overall system view. The model presented in the document below provides a structured, cost effective approach to address technical security in process control systems

374

Design and Operation of an Open, Interoperable Automated Demand Response  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Design and Operation of an Open, Interoperable Automated Demand Response Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings Title Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings Publication Type Journal Article LBNL Report Number LBNL-2340e Year of Publication 2009 Authors Piette, Mary Ann, Girish Ghatikar, Sila Kiliccote, David S. Watson, Edward Koch, and Dan Hennage Journal Journal of Computing Science and Information Engineering Volume 9 Issue 2 Keywords communication and standards, market sectors, openadr Abstract This paper describes the concept for and lessons from the development and field-testing of an open, interoperable communications infrastructure to support automated demand response (auto-DR). Automating DR allows greater levels of participation, improved reliability, and repeatability of the DR in participating facilities. This paper also presents the technical and architectural issues associated with auto-DR and description of the demand response automation server (DRAS), the client/server architecture-based middle-ware used to automate the interactions between the utilities or any DR serving entity and their customers for DR programs. Use case diagrams are presented to show the role of the DRAS between utility/ISO and the clients at the facilities.

375

Identifying Requirements for Effective Human-Automation Teamwork  

SciTech Connect (OSTI)

Previous studies have shown that poorly designed human-automation collaboration, such as poorly designed communication protocols, often leads to problems for the human operators, such as: lack of vigilance, complacency, and loss of skills. These problems often lead to suboptimal system performance. To address this situation, a considerable amount of research has been conducted to improve human-automation collaboration and to make automation function better as a team player. Much of this research is based on an understanding of what it means to be a good team player from the perspective of a human team. However, the research is often based on a simplified view of human teams and teamwork. In this study, we sought to better understand the capabilities and limitations of automation from the standpoint of human teams. We first examined human teams to identify the principles for effective teamwork. We next reviewed the research on integrating automation agents and human agents into mixed agent teams to identify the limitations of automation agents to conform to teamwork principles. This research resulted in insights that can lead to more effective human-automation collaboration by enabling a more realistic set of requirements to be developed based on the strengths and limitations of all agents.

Jeffrey C. Joe; John O'Hara; Heather D. Medema; Johanna H. Oxstrand

2014-06-01T23:59:59.000Z

376

Automated change detection with area matching  

Science Journals Connector (OSTI)

When resurveying a geographic area of the seafloor during sidescan change detection operations an automated method to match bottom objects imaged previously with objects imaged in the resurvey can increase efficiency and accuracy. The geographic position of a new object relative to a historical object is a good indicator of a match. However due to position error within either survey there may be more than one spatially?close object in the new imagery. To complicate matters further the reflected energy from the new object may be significantly different given a different incidence angle in the resurvey or the partial burial of the object. In addition the resurveyed object image may be below the threshold set for automatic recognition and falsely eliminated. This presentation will address these problems and suggest possible methods for matching constellations of bottom objects by Dijkstra's minimum cost ? maximum flow algorithm control point matching and the data?association procedure.

John Dubberley; Marlin Gendron; Maura Lohrenz

2008-01-01T23:59:59.000Z

377

Honeywell modular automation system computer software documentation  

SciTech Connect (OSTI)

The purpose of this Computer Software Document (CSWD) is to provide configuration control of the Honeywell Modular Automation System (MAS) in use at the Plutonium Finishing Plant (PFP). The Honeywell MAS is used to control the thermal stabilization furnaces in glovebox HA-211. The PFP developed software is being updated to reflect the Polycube Processing and Unwashed Salt Thermal Stabilization program addition. The polycube processing program was installed per HNF-FMP-02-11162-R2. The functional test of the program was performed in JCS work package 22-02-1031, The unwashed salt item program was installed per HNF-FMP-03-16577-RO. The functional test of the program completed in JCS work package 22-03-00654.

STUBBS, A.M.

2003-07-02T23:59:59.000Z

378

Honeywell Modular Automation System Acceptance Test Procedure  

SciTech Connect (OSTI)

The purpose of this Acceptance Test Procedure (ATP) is to verify the operability of the three new furnaces as controlled by the new Honeywell Modular Automation System (MAS). The Honeywell MAS is being installed in PFP to control the three thermal stabilization furnaces in glovebox HA-211. The ATP provides instructions for testing the configuration of the Honeywell MAS at the Plutonium Finishing Plant(PFP). The test will be a field test of the analog inputs, analog outputs, and software interlocks. The interlock test will check the digital input and outputs. Field equipment will not be connected forth is test. Simulated signals will be used to test thermocouple, limit switch, and vacuum pump inputs to the PLUMAS.

STUBBS, A.M.

1999-09-21T23:59:59.000Z

379

Automated interferometric alignment system for paraboloidal mirrors  

DOE Patents [OSTI]

A method is described for a systematic method of interpreting interference fringes obtained by using a corner cube retroreflector as an alignment aid when aigning a paraboloid to a spherical wavefront. This is applicable to any general case where such alignment is required, but is specifically applicable in the case of aligning an autocollimating test using a diverging beam wavefront. In addition, the method provides information which can be systematically interpreted such that independent information about pitch, yaw and focus errors can be obtained. Thus, the system lends itself readily to automation. Finally, although the method is developed specifically for paraboloids, it can be seen to be applicable to a variety of other aspheric optics when applied in combination with a wavefront corrector that produces a wavefront which, when reflected from the correctly aligned aspheric surface will produce a collimated wavefront like that obtained from the paraboloid when it is correctly aligned to a spherical wavefront.

Maxey, L. Curtis (Powell, TN)

1993-01-01T23:59:59.000Z

380

Automated interferometric alignment system for paraboloidal mirrors  

DOE Patents [OSTI]

A method is described for a systematic method of interpreting interference fringes obtained by using a corner cube retroreflector as an alignment aid when aligning a paraboloid to a spherical wavefront. This is applicable to any general case where such alignment is required, but is specifically applicable in the case of aligning an autocollimating test using a diverging beam wavefront. In addition, the method provides information which can be systematically interpreted such that independent information about pitch, yaw and focus errors can be obtained. Thus, the system lends itself readily to automation. Finally, although the method is developed specifically for paraboloids, it can be seen to be applicable to a variety of other aspheric optics when applied in combination with a wavefront corrector that produces a wavefront which, when reflected from the correctly aligned aspheric surface will produce a collimated wavefront like that obtained from the paraboloid when it is correctly aligned to a spherical wavefront. 14 figures.

Maxey, L.C.

1993-09-28T23:59:59.000Z

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Manz Automation AG | Open Energy Information  

Open Energy Info (EERE)

AG AG Jump to: navigation, search Name Manz Automation AG Place Reutlingen, Baden-Württemberg, Germany Zip D-72768 Sector Solar Product German manufacturer of solar and LCD capital equipment. Coordinates 48.49159°, 9.21487° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.49159,"lon":9.21487,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

382

Recent developments in the PHENIX software for automated crystallographic structure determination  

Science Journals Connector (OSTI)

Recent developments in PHENIX, a new software system for automated crystallographic structure determination, are described.

Adams, P.D.

2003-11-28T23:59:59.000Z

383

Microsoft Word - Wireless Automation World for OE FINAL.doc  

Broader source: Energy.gov (indexed) [DOE]

Automation World Features New White Paper on Wireless Security, Interviews Authors Automation World Features New White Paper on Wireless Security, Interviews Authors April 16, 2009 The April 2009 issue of Automation World magazine features the white paper Wireless Systems Considerations When Implementing NERC Critical Infrastructure Protection Standards. The paper addresses wireless protection issues arising from requirements of the Critical Infrastructure Protection (CIP) Standards for the electricity sector, developed by the North American Electric Reliability Corporation (NERC). The CIP standards require entities to monitor and control all electronic access to a company's electronic security perimeter, but this requirement becomes difficult to implement when it

384

PR-PR: Cross-Platform Laboratory Automation System  

Science Journals Connector (OSTI)

Following our previous PR-PR report, it remained to demonstrate PR-PR as a cross-platform laboratory automation system, with support for liquid-handling robotics beyond the Tecan Freedom Evo platform, as well as for entirely distinct device categories including microfluidic devices, human languages (e.g., English), and even non-liquid-handling devices such as automated microscopy systems. ... Here, we report the development and deployment of a web-based software tool, j5, which automates the design of scar-less multipart DNA assembly protocols including SLIC, Gibson, CPEC, and Golden Gate. ...

Gregory Linshiz; Nina Stawski; Garima Goyal; Changhao Bi; Sean Poust; Monica Sharma; Vivek Mutalik; Jay D. Keasling; Nathan J. Hillson

2014-01-09T23:59:59.000Z

385

Industrial SPP/Partner Teaming Profile - Rockwell Automation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rockwell Automation Rockwell Automation 6400 West Enterprise Drive Mequon, WI 53092 Business: Control Products & Solutions Joshua J. Olive Sr. Product Specialist Phone: 262-512-2095 Email: jjolive@ra.rockwell.com Industrial Partner General Mills 9000 Plymouth Ave. North Minneapolis, MN 55427 Business: Food Processing David Spryshak Facilities, Control, & IS Engineer Phone: 763-764-7091 Email: Dave.spryshak@genmills.com Rockwell Automation helps General Mills save $2.6 million annually through a standardized energy management system for air handling units Project Scope Rockwell Automation partnered with General Mills to develop a standardized energy management system (EMS) for controlling air handling units (AHU) and has installed the system at 14 General Mills

386

Definition: Automated Feeder And Line Switching | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Automated Feeder And Line Switching Jump to: navigation, search Dictionary.png Automated Feeder And Line Switching Automated feeder and line switching is realized through automatic isolation and reconfiguration of faulted segments of distribution feeders or transmission lines via sensors, controls, switches, and communications systems. These devices can operate autonomously in response to local events or in response to signals from a central control system.[1] Related Terms transmission lines, transmission line References ↑ SmartGrid.gov 'Description of Functions' An i LikeLike UnlikeLike You like this.Sign Up to see what your friends like. nline Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Automated_Feeder_And_Line_Switching&oldid=480562"

387

Price Server System for Automated Critical Peak Pricing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Price Server System for Automated Critical Peak Pricing Price Server System for Automated Critical Peak Pricing Speaker(s): David S. Watson Date: June 3, 2005 - 12:00pm Location: 90-3148 Overview of current California Energy Commission (CEC)/Demand Response Research Center (DRRC) Auto-CPP project: This summer, some select commercial CPP customers of PG&E will have the option of joining the Automated Critical Peak Pricing pilot. The pilot will have the same tariffs as standard CPP programs, but will include an added feature: automated shedding of electric loads. Through use of the Price Server System, day-ahead CPP event signals initiated by PG&E will ultimately cause electric loads to be automatically curtailed on commercial customer sites. These optional predetermined shed strategies will occur without

388

New Services for Building Maintenance Enabled by Building Automation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

New Services for Building Maintenance Enabled by Building Automation New Services for Building Maintenance Enabled by Building Automation Systems Speaker(s): Heikki Ihasalo Date: May 17, 2007 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Peng Xu Today's building automation systems enable building systems integration and access to information from a variety of sources, e.g. fire alarm systems, access control, security systems, lighting and control systems. With the help of Internet technology and XML (Extensible Markup Language) building automation systems can also connect to other enterprise\ applications such as facility management software, maintenance management systems, ERP or financial systems. New applications are also emerging to manage energy consumption in buildings, for example demand response and fault detection

389

Global health response more accurate with automated influenza surveillance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Global health response more accurate with automated influenza Global health response more accurate with automated influenza surveillance Global health response more accurate with automated influenza surveillance Public health officials will be able to determine whether an outbreak of an infectious disease comes from a pandemic strain or one less virulent. January 31, 2011 Lance Green of LANL tests an earlier version of a modular laboratory like the ones that will be part of the High-Throughput Laboratory Network Lance Green of LANL tests an earlier version of a modular laboratory like the ones that will be part of the High-Throughput Laboratory Network-a series of compact, self-contained, automated systems for surveillance and screening of potential pandemic strains of influenza and other deadly infectious diseases.

390

V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple  

Broader source: Energy.gov (indexed) [DOE]

V-205: IBM Tivoli System Automation for Multiplatforms Java V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013 - 4:20am Addthis PROBLEM: IBM has acknowledged a weakness and multiple vulnerabilities in IBM Tivoli System Automation for Multiplatforms, which can be exploited by malicious, local users to disclose certain sensitive information and gain escalated privileges and by malicious people to disclose certain sensitive information, manipulate certain data, bypass certain security restrictions, cause a DoS (Denial of Service), and compromise a vulnerable system. PLATFORM: The weakness and the vulnerabilities are reported in versions 3.1 through 3.2.2 running on AIX, Linux, Solaris, and Windows.

391

Radioanalytical Chemistry for Automated Nuclear Waste Process Monitoring  

SciTech Connect (OSTI)

The objectives of our research were to develop the first automated radiochemical process analyzer including sample pretreatment methodoology, and to initiate work on new detection approaches, especially using modified diode detectors.

Jay W. Grate; Timothy A. DeVol

2006-07-20T23:59:59.000Z

392

Summary of the 2006 Automated Demand Response Pilot  

E-Print Network [OSTI]

This paper discusses the specific concept for, design of, and results from a pilot program to automate demand response with critical peak pricing. California utilities have been exploring the use of critical peak pricing (CPP) to help reduce peak...

Piette, M.; Kiliccote, S.

2007-01-01T23:59:59.000Z

393

Design, Simulation, and Analysis of Substation Automation Networks  

E-Print Network [OSTI]

on the Substation Automation Systems (SAS). Substations are nodes in the smart grid infrastructure that help the in transportation of power by connecting the transmission and distribution lines. The SAS applications are con figured to operate with minimal human...

Kembanur Natarajan, Elangovan

2012-07-16T23:59:59.000Z

394

Human-automation collaborative RRT for UAV mission path planning  

E-Print Network [OSTI]

Future envisioned Unmanned Aerial Vehicle (UAV) missions will be carried out in dynamic and complex environments. Human-automation collaboration will be required in order to distribute the increased mission workload that ...

Caves, Amrico De Jess (Caves Corral)

2010-01-01T23:59:59.000Z

395

Security Assessment of Communication Networks for Integrated Substation Automation Systems  

Science Journals Connector (OSTI)

To assess the security of communication networks for integrated substation automation systems, a systematic approach based on ... to communication networks between the control center and substations through the a...

Huisheng Gao; Xuejiao Dai

2011-01-01T23:59:59.000Z

396

A Methodology for Automated Verification of Rosetta Specification Transformations  

E-Print Network [OSTI]

particular semantic vocabulary and modeling style. The following dissertation proposes a framework, semantics and methodology for automated verification of safety preservation over specification transformations between domains. Utilizing the ideas of lattice...

Lohoefener, Jennifer Lee

2011-04-11T23:59:59.000Z

397

Chapter Two - Automated Extraction of GUI Models for Testing  

Science Journals Connector (OSTI)

Abstract A significant challenge in applying model-based testing on software systems is that manually designing the test models requires considerable amount of effort and deep expertise in formal modeling. When an existing system is being modeled and tested, there are various techniques to automate the process of producing the models based on the implementation. Some approaches aim to fully automated creation of the models, while others aim to automate the first steps to create an initial model to serve as a basis to start the manual modeling process. Especially graphical user interface (GUI) applications, including mobile and Web applications, have been a good domain for model extraction, reverse engineering, and specification mining approaches. In this chapter, we survey various automated modeling techniques, with a special focus on GUI models and their usefulness in analyzing and testing of the modeled GUI applications.

Pekka Aho; Teemu Kanstrn; Tomi Rty; Juha Rning

2014-01-01T23:59:59.000Z

398

Automated home-cage behavioral phenotyping of mice  

E-Print Network [OSTI]

We describe a trainable computer vision system enabling the automated analysis of complex mouse behaviors. We provide software and a very large manually annotated video database used for training and testing the system. ...

Yu, Xinlin

2009-10-26T23:59:59.000Z

399

Design and Fabrication of Security and Home Automation System  

Science Journals Connector (OSTI)

Home automation system was designed and fabricated for controlling of home appliances, gas detection and home security. The fabricated system could detect the ... the house or office and the operation of home app...

Eung Soo Kim; Min Sung Kim

2006-01-01T23:59:59.000Z

400

Trainable, vision-based automated home cage behavioral phenotyping  

E-Print Network [OSTI]

We describe a fully trainable computer vision system enabling the automated analysis of complex mouse behaviors. Our system computes a sequence of feature descriptors for each video sequence and a classifier is used to ...

Jhuang, Hueihan

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

HEADLINE: DOE Pursues Automation in West Virginia Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

HEADLINE: DOE Pursues Automation in West Virginia Lab By Elizabeth McGowan Hakan Inan can envision a day in the near future when electric utilities will be able to find and isolate...

402

Evaluation Criteria for Human-Automation Performance Metrics  

E-Print Network [OSTI]

Previous research has identified broad metric classes for human-automation performance to facilitate metric selection, as well as understanding and comparison of research results. However, there is still lack of an objective ...

Pina, Patricia Elena

403

Application of Automation and Thermal Analysis to Resolving Agent Selection  

Science Journals Connector (OSTI)

The use of differential scanning calorimetry as a means to identify diastereoisomeric salts with a clear eutectic composition that is needed for effective resolution is described and forms the basis of a resolving agent screening process. Automated salt ...

Ulrich C. Dyer; David A. Henderson; Mark B. Mitchell

1999-03-19T23:59:59.000Z

404

Phoenito experiments: combining the strengths of commercial crystallization automation  

Science Journals Connector (OSTI)

This paper describes how four general optimization techniques, growth-rate modulation, fine screening, seeding and additive screening, have been adapted for automation in a medium-throughput crystallization service facility.

Newman, J.

2008-10-31T23:59:59.000Z

405

Liquid-Phase Combinatorial Synthesis Technique Could Ease Automation  

Science Journals Connector (OSTI)

A liquid-phase combinatorial synthesis technique developed by researchers at Scripps Research Institute, La Jolla, Calif., could provide advantages over existing solid-phase technology and ease automation of combinatorial techniques.Combinatorial ...

STU BORMAN

1995-07-31T23:59:59.000Z

406

21- and 27-Item Monetary Choice Questionnaire Automated Scorers  

E-Print Network [OSTI]

created to automatically score responses obtained using both versions of the MCQ. These automated calculators provide several discount rates (overall k, small, medium, large, and composite k), log and natural log transformations of discount rates...

Kaplan, Brent A.; Lemley, Shea M.; Reed, Derek D.; Jarmolowicz, David P.

2014-01-01T23:59:59.000Z

407

Automated Home Energy Management Standing Technical Committee Presentation  

Broader source: Energy.gov [DOE]

This presentation outlines the goals of the Automated Home Energy Management Standing Technical Committee, as presented at the Building America Spring 2012 Stakeholder meeting on February 29, 2012, in Austin, Texas.

408

Rule-based implementation of automation aids for ATC controllers  

E-Print Network [OSTI]

Development of Air Traffic Controller automation aids is frequently hampered by the mathematical nature of the algorithms they are based upon. These limitations are: lack of adaptability to local conditions; high development, ...

Elias, Antonio L.

1985-01-01T23:59:59.000Z

409

Automated Logic SER Analysis and On-Line SER reduction  

Science Journals Connector (OSTI)

This paper presents a method for automated analysis ofa combinational circuit to find the most SEU sensitive path,and proposes a way to make this path more robust for SEUin a low cost way.

Andre K. Nieuwland; Patrick Gindner

2004-07-01T23:59:59.000Z

410

Automated construction technologies : analyses and future development strategies  

E-Print Network [OSTI]

Substandard productivity and the lack of skilled workers in the construction industry have led major corporations all over the world aiming to produce various types of automated construction technologies. During the process, ...

Hoang, Han (Han Mai)

2005-01-01T23:59:59.000Z

411

Automated Part Tracking and Metrology Applied to a Manufacturing Process  

E-Print Network [OSTI]

This paper presents a case study in the design of an automated part tracking and metrology systems for an industrial manufacturing system. A major productivity challenge of this facility is managing each batch of parts as it is formed, treated...

Morelli, F.; Halbert, T.; Hignight, M.; Kell, Z.; Lacy, J.; Rasmussen, B. P.

2013-01-01T23:59:59.000Z

412

Design Automation for Microfluidics-Based KRISHNENDU CHAKRABARTY  

E-Print Network [OSTI]

Design Automation for Microfluidics-Based Biochips KRISHNENDU CHAKRABARTY Duke University and JUN ZENG Coventor, Inc. Advances in microfluidics technology offer exciting possibilities in the realm, implantable drug delivery devices, and environmental toxicity monitoring. Microfluidics-based biochips

Chakrabarty, Krishnendu

413

ISA Approves Standard for Wireless Automation in Process Control Applications  

Broader source: Energy.gov (indexed) [DOE]

ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications September 22, 2009 On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. The standard is intended to provide secure, reliable wireless operation for monitoring, alerting, and control applications. It enables robustness with non-ISA-compliant legacy wireless systems, coexistence and interoperability with other wireless devices, and robustness in harsh industrial environments. To meet the needs of industrial wireless users and operators of low-energy fixed, portable, and moving

414

Java Automation Controller and Real-Time Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Java Automation Controller and Real-Time Systems Java Automation Controller and Real-Time Systems Speaker(s): Greg Bollella Date: June 29, 2009 - 12:00pm Location: 90-3122 Java has always been a disruptive technology and now it is breaking the mold in industrial, process, building, and transportation automation systems. For many years, programmable logic controllers (PLCs), the digital versions of old relay-based control systems (such as that used in the NYC Subway system in the late 1800s) have primarily controlled these systems. PLCs are the workhorses of the controls industry but the market is characterized by proprietary, closed, expensive, special-purpose solutions. A Java-based automation controller breaks the mold by allowing control algorithms, which require strict real-time capabilities, to run on

415

Design and Construction of an Automated Community Bicycle Loan/  

E-Print Network [OSTI]

Design and Construction of an Automated Community Bicycle Loan/ Return System Richard Lopez $20 Box $50 Solar Power Panels $50 CPU $200 Total Per Unit $432 #12;Conclusion and Future · Lessons

Goadrich, Mark

416

A Distributed Facilities Automation System For IBM Buildings  

E-Print Network [OSTI]

protocol. This will allow the facility manager to take advantage of the expertise of ~any control system suppliers while retaining central control, override authority, and specialized manage ment functions. A distributed facilities automation system... protocol. This will allow the facility manager to take advantage of the expertise of ~any control system suppliers while retaining central control, override authority, and specialized manage ment functions. A distributed facilities automation system...

Houle, W. D. Sr.

417

Automated Vehicle Articulation and Animation: A Maxscript Approach  

E-Print Network [OSTI]

AUTOMATED VEHICLE ARTICULATION AND ANIMATION: A MAXSCRIPT APPROACH A Thesis by CHRISTOPHER COREY GRIFFIN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE December 2010 Major Subject: Visualization Sciences AUTOMATED VEHICLE ARTICULATION AND ANIMATION: A MAXSCRIPT APPROACH A Thesis by CHRISTOPHER GRIFFIN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment...

Griffin, Christopher Corey

2011-02-22T23:59:59.000Z

418

Automated characterization of single-photon avalanche photodiode  

E-Print Network [OSTI]

We report an automated characterization of a single-photon detector based on commercial silicon avalanche photodiode (PerkinElmer C30902SH). The photodiode is characterized by I-V curves at different illumination levels (darkness, 10 pW and 10 uW), dark count rate and photon detection efficiency at different bias voltages. The automated characterization routine is implemented in C++ running on a Linux computer.

Aina M. M. Ghazali; Audun N. Bugge; Sebastien Sauge; Vadim Makarov

2012-02-08T23:59:59.000Z

419

The Advanced Automation for Powder Diffraction toward Industrial Application  

SciTech Connect (OSTI)

A highly automated system for powder diffraction with synchrotron radiation was installed on the large Debye-Scherrer camera at the BL19B2 Engineering Science Research I beamline of SPring-8. Combined with a sample transfer and an automated centering system, we have succeeded in increasing the ratio of exposure time in the user beam time to 85%. The proposed system can be applied to a wide range of industrial uses.

Osaka, Keiichi; Matsumoto, Takuya; Miura, Keiko; Sato, Masugu; Hirosawa, Ichiro; Watanabe, Yoshio [Industrial Application Division, Japan Synchrotron Radiation Research Institute (JASRI/SPring8), 1-1-1, Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan)

2010-06-23T23:59:59.000Z

420

One IBM Plant's Approach to Automated Control System Standards  

E-Print Network [OSTI]

ONE IBM PLANT'S APPROACH"TO AUTOMATED CONTROL SYSTEM STANDARDS John P. Cilia International Business Machines Corporation Poughkeepsie, New York ABSTRACT INSTRUMENTATION STANDARDS The trend toward lower cost of new technologies in building... Facilities Automation Control System (IPDFACS) standards used in the bidding process, the philosophy behind them, the type of instrumentation specified to be installed, and how to maintain this complex DDDC system. INTRODUCTION The lower cost of chips...

Cilia, J. P.

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

The Advanced Automation for Powder Diffraction toward Industrial Application  

Science Journals Connector (OSTI)

A highly automated system for powder diffraction with synchrotron radiation was installed on the large Debye?Scherrer camera at the BL19B2 Engineering Science Research I beamline of SPring?8. Combined with a sample transfer and an automated centering system we have succeeded in increasing the ratio of exposure time in the user beam time to 85%. The proposed system can be applied to a wide range of industrial uses.

Keiichi Osaka; Takuya Matsumoto; Keiko Miura; Masugu Sato; Ichiro Hirosawa; Yoshio Watanabe

2010-01-01T23:59:59.000Z

422

Automated Demand Response Opportunities in Wastewater Treatment Facilities  

SciTech Connect (OSTI)

Wastewater treatment is an energy intensive process which, together with water treatment, comprises about three percent of U.S. annual energy use. Yet, since wastewater treatment facilities are often peripheral to major electricity-using industries, they are frequently an overlooked area for automated demand response opportunities. Demand response is a set of actions taken to reduce electric loads when contingencies, such as emergencies or congestion, occur that threaten supply-demand balance, and/or market conditions occur that raise electric supply costs. Demand response programs are designed to improve the reliability of the electric grid and to lower the use of electricity during peak times to reduce the total system costs. Open automated demand response is a set of continuous, open communication signals and systems provided over the Internet to allow facilities to automate their demand response activities without the need for manual actions. Automated demand response strategies can be implemented as an enhanced use of upgraded equipment and facility control strategies installed as energy efficiency measures. Conversely, installation of controls to support automated demand response may result in improved energy efficiency through real-time access to operational data. This paper argues that the implementation of energy efficiency opportunities in wastewater treatment facilities creates a base for achieving successful demand reductions. This paper characterizes energy use and the state of demand response readiness in wastewater treatment facilities and outlines automated demand response opportunities.

Thompson, Lisa; Song, Katherine; Lekov, Alex; McKane, Aimee

2008-11-19T23:59:59.000Z

423

Follicular unit extraction hair transplant automation: Options in overcoming challenges of the latest technology in hair restoration with the goal of avoiding the line scar  

E-Print Network [OSTI]

extraction hair transplant automation: Options in overcomingis also required [ 4 ]. Automation of various steps of FUEFor example, with automation, increased harvest numbers are

Rashid, Rashid M; Bicknell, Lindsay T Morgan

2012-01-01T23:59:59.000Z

424

Chip breaking system for automated machine tool  

DOE Patents [OSTI]

The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

Arehart, Theodore A. (Clinton, TN); Carey, Donald O. (Oak Ridge, TN)

1987-01-01T23:59:59.000Z

425

Automation of Network-Based Scientific Workflows  

SciTech Connect (OSTI)

Comprehensive, end-to-end, data and workflow management solutions are needed to handle the increasing complexity of processes and data volumes associated with modern distributed scientific problem solving, such as ultra-scale simulations and high-throughput experiments. The key to the solution is an integrated network-based framework that is functional, dependable, fault-tolerant, and supports data and process provenance. Such a framework needs to make development and use of application workflows dramatically easier so that scientists' efforts can shift away from data management and utility software development to scientific research and discovery An integrated view of these activities is provided by the notion of scientific workflows - a series of structured activities and computations that arise in scientific problem-solving. An information technology framework that supports scientific workflows is the Ptolemy II based environment called Kepler. This paper discusses the issues associated with practical automation of scientific processes and workflows and illustrates this with workflows developed using the Kepler framework and tools.

Altintas, I. [University of California, La Jolla; Barreto, R. [Oak Ridge National Laboratory (ORNL); Blondin, J. M. [North Carolina State University; Cheng, Z. [North Carolina State University; Critchlow, T. [Lawrence Livermore National Laboratory (LLNL); Khan, A. [University of Utah; Klasky, Scott A [ORNL; Ligon, J. [North Carolina State University; Ludaescher, B. [University of California, Davis; Mouallem, P. A. [North Carolina State University; Parker, S. [University of Utah; Podhorszki, Norbert [University of California, Davis; Shoshani, A. [Lawrence Berkeley National Laboratory (LBNL); Silva, C. [University of Utah; Vouk, M. A. [North Carolina State University

2007-01-01T23:59:59.000Z

426

Effect Of False Alarm Rate On Pilot Use And Trust Of Automation Under Conditions Of Simulated High Risk  

E-Print Network [OSTI]

An experimental study was conducted to investigate the relationships between automation false alarm rate, human trust in automation, and human use of automation, specifically under conditions of simulated high risk. The ...

Cafarelli, Deborah

2010-11-05T23:59:59.000Z

427

KSL Kuttler Automation Systems GmbH | Open Energy Information  

Open Energy Info (EERE)

KSL Kuttler Automation Systems GmbH KSL Kuttler Automation Systems GmbH Jump to: navigation, search Name KSL-Kuttler Automation Systems GmbH Place Dauchingen, Baden-Württemberg, Germany Zip 78083 Sector Solar Product KSL-Kuttler Automation Systems GmbH is a manufacturer of automation systems for the PCB-industry and solar industry. KSL Kuttler was acquired by Suntech in April 2008. Coordinates 48.090319°, 8.552377° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.090319,"lon":8.552377,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

428

Automated roller shades : Daylighting The New York Times Building  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Automated roller shades Automated roller shades Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Automated roller shades Automated roller shades manage daylight, solar heat gains, view, glare, privacy, and building appearance through changes in shade height. A roller shade consists of a fabric wrapped around a horizontal tube, which contains a tubular motor. The tubular motor rotates when ac- or dc- power is applied to it causing modulation in shade height. The control system can be designed to optimize numerous variables, the most common being control of direct sun. In this application, the shades were controlled to five preset heights that aligned with the architectural features of the façade - i.e., the vision portion of the window wall - so that direct sun penetrated no more than a specified distance from the window wall. The Times Company also requested that the shades control window glare, yet maximize the opportunity for view and daylight admission. Unnecessary up/down movement of the shade was to be minimized. Fabric choices (openness of the weave, color of the fabric facing toward the interior and exterior) were additional considerations in terms of appearance as well as visual comfort and daylighting benefits.

429

Automated Proactive Techniques for Commissioning Air-Handling Units  

SciTech Connect (OSTI)

Many buildings today use sophisticated building automation systems (BASs) to manage a wide and varied range of building systems. Although the capabilities of the BASs seem to have increased over time, many buildings still are not properly commissioned, operated or maintained. Lack of or improper commissioning, the inability of the building operators to grasp the complex controls, and lack of proper maintenance leads to inefficient operations and reduced lifetimes of the equipment. If regularly scheduled manual maintenance or re-commissioning practices are adopted, they can be expensive and time consuming. Automated proactive commissioning and diagnostic technologies address two of the main barriers to commissioning: cost and schedules. Automated proactive continuous commissioning tools can reduce both the cost and time associated with commissioning, as well as enhance the persistence of commissioning fixes. In the long run, automation even offers the potential for automatically correcting problems by reconfiguring controls or changing control algorithms dynamically. This paper will discuss procedures and processes that can be used to automate and continuously commission the economizer operation and outdoor-air ventilation systems of an air-handling unit.

Katipamula, Srinivas (BATTELLE (PACIFIC NW LAB)); Brambley, Michael R. (BATTELLE (PACIFIC NW LAB)); Luskay, Larry (Portland Energy Conservation, Inc.)

2003-08-30T23:59:59.000Z

430

DA (Distribution Automation) (Smart Grid Project) | Open Energy Information  

Open Energy Info (EERE)

DA (Distribution Automation) (Smart Grid Project) DA (Distribution Automation) (Smart Grid Project) Jump to: navigation, search Project Name DA (Distribution Automation) Country Netherlands Coordinates 52.132633°, 5.291266° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":52.132633,"lon":5.291266,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

431

title Automated Price and Demand Response Demonstration for Large Customers  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Automated Price and Demand Response Demonstration for Large Customers Automated Price and Demand Response Demonstration for Large Customers in New York City using OpenADR booktitle International Conference for Enhanced Building Operations ICEBO year month address Montreal Quebec abstract p class p1 Open Automated Demand Response OpenADR an XML based information exchange model is used to facilitate continuous price responsive operation and demand response participation for large commercial buildings in New York who are subject to the default day ahead hourly pricing We summarize the existing demand response programs in New York and discuss OpenADR communication prioritization of demand response signals and control methods Building energy simulation models are developed and field tests are conducted to evaluate continuous energy management

432

HEADLINE: DOE Pursues Automation in West Virginia Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

HEADLINE: DOE Pursues Automation in West Virginia Lab HEADLINE: DOE Pursues Automation in West Virginia Lab By Elizabeth McGowan Hakan Inan can envision a day in the near future when electric utilities will be able to find and isolate faults, then restore service-in record time and without human intervention. His goal is to create a model for automating the process of locating a fault and reconfiguring the feeder. And in utility circles, it's considered very tricky because nobody has yet perfected the process, even though the hardware and software have become available during the last several years. Hakan Inan, is an electrical engineer for Science Applications International Corporation, providing support to the NETL Modern Grid Strategy Program through Research and Development Solutions, LLC, is experimenting with this technology in Morgantown, W.V.,

433

International Automated Systems Inc IAUS | Open Energy Information  

Open Energy Info (EERE)

International Automated Systems Inc IAUS International Automated Systems Inc IAUS Jump to: navigation, search Name International Automated Systems Inc (IAUS) Place Salem, Utah Zip 84653 Product Has developed a lens-based technology for concentrating heat in STEGSs, which it plans to deploy at projects. Coordinates 42.554485°, -88.110549° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.554485,"lon":-88.110549,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

434

Automation and security of Supply (Smart Grid Project) | Open Energy  

Open Energy Info (EERE)

Automation and security of Supply (Smart Grid Project) Automation and security of Supply (Smart Grid Project) Jump to: navigation, search Project Name Automation and security of Supply Country Denmark Coordinates 56.26392°, 9.501785° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":56.26392,"lon":9.501785,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

435

Aescusoft GmbH Automation | Open Energy Information  

Open Energy Info (EERE)

Aescusoft GmbH Automation Aescusoft GmbH Automation Jump to: navigation, search Name Aescusoft GmbH Automation Place Ettenheim, Germany Zip 77955 Product Offers PV cell testing lines. Coordinates 48.256309°, 7.813654° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.256309,"lon":7.813654,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

436

Automated particulate sampler field test model operations guide  

SciTech Connect (OSTI)

The Automated Particulate Sampler Field Test Model Operations Guide is a collection of documents which provides a complete picture of the Automated Particulate Sampler (APS) and the Field Test in which it was evaluated. The Pacific Northwest National Laboratory (PNNL) Automated Particulate Sampler was developed for the purpose of radionuclide particulate monitoring for use under the Comprehensive Test Ban Treaty (CTBT). Its design was directed by anticipated requirements of small size, low power consumption, low noise level, fully automatic operation, and most predominantly the sensitivity requirements of the Conference on Disarmament Working Paper 224 (CDWP224). This guide is intended to serve as both a reference document for the APS and to provide detailed instructions on how to operate the sampler. This document provides a complete description of the APS Field Test Model and all the activity related to its evaluation and progression.

Bowyer, S.M.; Miley, H.S.

1996-10-01T23:59:59.000Z

437

Reliability and component importance analysis of substation automation systems  

Science Journals Connector (OSTI)

This paper aims to present a comprehensive technique to quantitatively assess the reliability of substation automation systems. The technique is based on the tie-sets methodology. In order to demonstrate the application of the proposed technique, a variety of substation automation architectures is first introduced. The associated reliability block diagrams as well as the exact system reliability are then given. The impacts and the degree of importance of various components on the reliability of substation automation systems are presented. Two suitable measures of importance are selected. The first is the Birnbaums measure used to determine the bottleneck of the system reliability. The second measure uses criticality importance to diagnose failures and generating repair or inspection checklists.

Hamze Hajian-Hoseinabadi

2013-01-01T23:59:59.000Z

438

Conceptual design of an aircraft automated coating removal system  

SciTech Connect (OSTI)

Paint stripping of the U.S. Air Force`s large transport aircrafts is currently a labor-intensive, manual process. Significant reductions in costs, personnel and turnaround time can be accomplished by the judicious use of automation in some process tasks. This paper presents the conceptual design of a coating removal systems for the tail surfaces of the C-5 plane. Emphasis is placed on the technology selection to optimize human-automation synergy with respect to overall costs, throughput, quality, safety, and reliability. Trade- offs between field-proven vs. research-requiring technologies, and between expected gain vs. cost and complexity, have led to a conceptual design which is semi-autonomous (relying on the human for task specification and disturbance handling) yet incorporates sensor- based automation (for sweep path generation and tracking, surface following, stripping quality control and tape/breach handling).

Baker, J.E.; Draper, J.V.; Pin, F.G.; Primm, A.H.; Shekhar, S.

1996-05-01T23:59:59.000Z

439

Abstract 1516: Automated circulating DNA purification from large volumes of plasma  

Science Journals Connector (OSTI)

...Automated circulating DNA purification from large volumes of plasma...The current commercial DNA purification methods limit researchers...microl of nuclease-free water in either plates or tubes...Automated circulating DNA purification from large volumes of plasma...

Sydnor T. Withers; Mary Dressler; and Cristopher A. Cowan

2014-10-01T23:59:59.000Z

440

Improving Effectiveness of Automated Software Testing in the Absence of Specifications  

E-Print Network [OSTI]

Improving Effectiveness of Automated Software Testing in the Absence of Specifications Tao Xie Program specifications can be valuable in improving the effectiveness of automated software testing in generating test inputs and checking test executions for correctness. Un- fortunately, specifications

Xie, Tao

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

In vivo robotics: the automation of neuroscience and other intact-system biological fields  

E-Print Network [OSTI]

Robotic and automation technologies have played a huge role in in vitro biological science, having proved critical for scientific endeavors such as genome sequencing and high-throughput screening. Robotic and automation ...

Forest, Craig R.

442

,The Impact of Human-Automation Collaboration in Decentralized Multiple Unmanned Vehicle Control  

E-Print Network [OSTI]

For future systems that require one or a small team of operators to supervise a network of automated agents, automated planners are critical since they are faster than humans for path planning and resource allocation in ...

Cummings, M.L.

2012-01-01T23:59:59.000Z

443

ETM (Distribution Network Automation on 10 kV cable line stations...  

Open Energy Info (EERE)

ETM (Distribution Network Automation on 10 kV cable line stations) (Smart Grid Project) Jump to: navigation, search Project Name ETM (Distribution Network Automation on 10 kV cable...

444

Department of Industrial and Manufacturing Engineering Fall 2012 Automation of Test Sample Burning  

E-Print Network [OSTI]

PENNSTATE Department of Industrial and Manufacturing Engineering Fall 2012 Automation of Test of redesign is $20,385 Operational costs of redesign are $1,080 per month Fully automated solution

Demirel, Melik C.

445

LABORATORY EQUIPMENT Most of the work at the Automation and Control Institute is done with the  

E-Print Network [OSTI]

15 4 LABORATORY EQUIPMENT Most of the work at the Automation and Control Institute is done with MetsoDNA open automation system. When testing more sophisticated control algorithms the process data

446

Design of an automated sorting and orienting machine for electronic pins  

E-Print Network [OSTI]

At the power electronics manufacturer SynQor, the printed circuit board (PCB) assembly line is fully automated with the exception of the step which inserts electronic pins into the PCBs. Past attempts to automate this ...

Chang, Michelle Sueway

2012-01-01T23:59:59.000Z

447

Development and Evaluation of an Automated Annotation Pipeline and cDNA Annotation System  

E-Print Network [OSTI]

Development and Evaluation of an Automated Annotation Pipeline and cDNA Annotation System Takeya, including an automated annotation pipeline that provides high-quality preliminary annotation for each

Gough, Julian

448

E-Print Network 3.0 - automated production line Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nov 1994, pp. 18. Summary: for Pharmaceutical and Food Products,'' Presented at the 1994 RIA Flexible Parts Feeding for Automated Handling... and Automation, v. 10,n. 4, Aug 1994,...

449

E-Print Network 3.0 - automated microbiology plating Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

need to be performed as part of (automated version of) assay 1.1.2. Identify appropriate micro-plate... plates? Does the automation (material handling robot) have sufficient...

450

E-Print Network 3.0 - automated relation extraction Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technologies and Information Sciences 45 Automated registration of 3D-range with 2D-color images: an overview Summary: Automated registration of 3D-range with 2D-color...

451

Automated Demand Response Technologies and Demonstration in New York City  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technologies and Demonstration in New York City Technologies and Demonstration in New York City using OpenADR Title Automated Demand Response Technologies and Demonstration in New York City using OpenADR Publication Type Report LBNL Report Number LBNL-6470E Year of Publication 2013 Authors Kim, Joyce Jihyun, Sila Kiliccote, and Rongxin Yin Date Published 09/2013 Publisher LBNL/NYSERDA Abstract Demand response (DR) - allowing customers to respond to reliability requests and market prices by changing electricity use from their normal consumption pattern - continues to be seen as an attractive means of demand-side management and a fundamental smart-grid improvement that links supply and demand. Since October 2011, the Demand Response Research Center at Lawrence Berkeley National Laboratory and New York State Energy Research and Development Authority have conducted a demonstration project enabling Automated Demand Response (Auto-DR) in large commercial buildings located in New York City using Open Automated Demand Response (OpenADR) communication protocols. In particular, this project focuses on demonstrating how OpenADR can automate and simplify interactions between buildings and various stakeholders in New York State including the independent system operator, utilities, retail energy providers, and curtailment service providers. In this paper, we present methods to automate control strategies via building management systems to provide event-driven demand response, price response and demand management based on OpenADR signals. We also present cost control opportunities under day-ahead hourly pricing for large customers and Auto-DR control strategies developed for demonstration buildings. Lastly, we discuss the communication architecture and Auto-DR system designed for the demonstration project to automate price response and DR participation.

452

Integrated, Automated Distributed Generation Technologies Demonstration  

SciTech Connect (OSTI)

The purpose of the NETL Project was to develop a diverse combination of distributed renewable generation technologies and controls and demonstrate how the renewable generation could help manage substation peak demand at the ATK Promontory plant site. The Promontory plant site is located in the northwestern Utah desert approximately 25 miles west of Brigham City, Utah. The plant encompasses 20,000 acres and has over 500 buildings. The ATK Promontory plant primarily manufactures solid propellant rocket motors for both commercial and government launch systems. The original project objectives focused on distributed generation; a 100 kW (kilowatt) wind turbine, a 100 kW new technology waste heat generation unit, a 500 kW energy storage system, and an intelligent system-wide automation system to monitor and control the renewable energy devices then release the stored energy during the peak demand time. The original goal was to reduce peak demand from the electrical utility company, Rocky Mountain Power (RMP), by 3.4%. For a period of time we also sought to integrate our energy storage requirements with a flywheel storage system (500 kW) proposed for the Promontory/RMP Substation. Ultimately the flywheel storage system could not meet our project timetable, so the storage requirement was switched to a battery storage system (300 kW.) A secondary objective was to design/install a bi-directional customer/utility gateway application for real-time visibility and communications between RMP, and ATK. This objective was not achieved because of technical issues with RMP, ATK Information Technology Departments stringent requirements based on being a rocket motor manufacturing facility, and budget constraints. Of the original objectives, the following were achieved: Installation of a 100 kW wind turbine. Installation of a 300 kW battery storage system. Integrated control system installed to offset electrical demand by releasing stored energy from renewable sources during peak hours of the day. Control system also monitors the wind turbine and battery storage system health, power output, and issues critical alarms. Of the original objectives, the following were not achieved: 100 kW new technology waste heat generation unit. Bi-directional customer/utility gateway for real time visibility and communications between RMP and ATK. 3.4% reduction in peak demand. 1.7% reduction in peak demand was realized instead.

Jensen, Kevin

2014-09-30T23:59:59.000Z

453

Rockwell Automation & General Mills Teaming Profile | ENERGY STAR Buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rockwell Automation & General Mills Teaming Profile Rockwell Automation & General Mills Teaming Profile Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

454

The Robo-AO automated intelligent queue system  

E-Print Network [OSTI]

Robo-AO is the first automated laser adaptive optics instrument. In just its second year of scientific operations, it has completed the largest adaptive optics surveys to date, each comprising thousands of targets. Robo-AO uses a fully automated queue scheduling system that selects targets based on criteria entered on a per observing program or per target basis, and includes the ability to coordinate with US Strategic Command automatically to avoid lasing space assets. This enables Robo-AO to select among thousands of targets at a time, and achieve an average observation rate of approximately 20 targets per hour.

Riddle, Reed L; Papadopoulos, Athanasios; Baranec, Christoph; Law, Nicholas M

2014-01-01T23:59:59.000Z

455

E-Print Network 3.0 - automation simulation system Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: Information and Reservation System" "Automated Phone Book Management System" "Simulation of Searching Family... HMI" "Security System Simulator" "Performance Comparison...

456

E-Print Network 3.0 - automated words stability Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

on Operational Text Classification Systems Summary: categorization, automated indexing, document clustering, text mining, topic detection and tracking, etc.). Both... the...

457

E-Print Network 3.0 - automated sampling assessment Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

California Collection: Engineering ; Computer Technologies and Information Sciences 49 EMERGENCY AUTOMATED RESPONSE SYSTEM (EARS) Summary: participants was conducted to assess...

458

Final Draft Building Automation Systems Design and Construction Standards October 3rd  

E-Print Network [OSTI]

Final Draft Building Automation Systems Design and Construction Standards October 3rd , 2013 1 Building Automation System Design and Construction Standards University of Rochester Utilities and Energy Automation Systems Design and Construction Standards October 3rd , 2013 2 University of Rochester Building

Portman, Douglas

459

Systems for home automation are a necessary component for intelligent smart homes applications.  

E-Print Network [OSTI]

Abstract Systems for home automation are a necessary component for intelligent smart homes to provide semantically rich unification over a range of home- and web-based automation systems. 1. Introduction Whilst a number of automation systems for smart homes are available commercially, their use

Dobson, Simon

460

Automation Techniques for Intelligent Environments Prediction of Building Activity Patterns Using a Cyclic Genetic Algorithm  

E-Print Network [OSTI]

on the automation of these features and making the home a dynamic object that can better the comfort of its beneficial. Although the number of sensors in an average home and their uses in automation of simple tasksAutomation Techniques for Intelligent Environments Prediction of Building Activity Patterns Using

Parker, Gary B.

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Distant Speech Recognition for Home Automation: Preliminary Experimental Results in a Smart Home  

E-Print Network [OSTI]

Distant Speech Recognition for Home Automation: Preliminary Experimental Results in a Smart Home a new home automation system based on voice command. The study focused on two tasks: distant speech; triggered language models; home automation; smart home I. INTRODUCTION The evolution of ICT led

Paris-Sud XI, Université de

462

An Online Approach for the Service Interaction Problem in Home Automation  

E-Print Network [OSTI]

An Online Approach for the Service Interaction Problem in Home Automation Michael Wilson, Evan H. FK9 4LA {mew, ehm, mko}@cs.stir.ac.uk Abstract-- Home automation is maturing with the increased-mail [6] and web-services [7], the problem can be found within the home automation domain. This is when

Kolberg, Mario

463

Automation of the EMBL Hamburg protein crystallography beamline BW7B  

Science Journals Connector (OSTI)

The automation of the EMBL Hamburg wiggler beamline BW7B for protein crystallography is described. The beamline features an automated end-station, a robotic sample changer, semi-automated sample centering based on UV fluorescence and new control software including intuitive graphical user interfaces.

Pohl, E.

2004-08-17T23:59:59.000Z

464

Integrating Automation Design Information with XML and Web Services Mika Viinikkala  

E-Print Network [OSTI]

Integrating Automation Design Information with XML and Web Services Mika Viinikkala Tampere University of Technology, Institute of Automation and Control, P.O. Box 692, 33101 Tampere Tel. +358 3 3115, Institute of Automation and Control, P.O. Box 692, 33101 Tampere Tel. +358 3 3115 3557, Fax. +358 3 3115

465

Optimal Part and Module Selection for Synthetic Gene Circuit Design Automation  

Science Journals Connector (OSTI)

Optimal Part and Module Selection for Synthetic Gene Circuit Design Automation ... A step toward automated synthetic circuit design is the selection of a part set so that the final circuit exhibits the desired behavior. ... Our workflow is the first to automate the prodn. of biol. ...

Linh Huynh; Ilias Tagkopoulos

2014-01-28T23:59:59.000Z

466

Abstract--With the deregulation and restructuring of utility industry, many substation automation applications are being  

E-Print Network [OSTI]

1 Abstract--With the deregulation and restructuring of utility industry, many substation automation serves as a handy tool for substation automation related studies. Index Terms--Alternative Transient the deregulation and restructuring of utility industry, it is desirable to introduce more automated functions

467

RESEARCH AT THE AUTOMATION AND CONTROL INSTITUTE OF TAMPERE UNIVERSITY OF TECHNOLOGY  

E-Print Network [OSTI]

22 5 RESEARCH AT THE AUTOMATION AND CONTROL INSTITUTE OF TAMPERE UNIVERSITY OF TECHNOLOGY should try to develop new solutions, methods and tools to improve the level of automation of the Finnish information technologies in automation. More than 50 % of the diploma theses (M.Sc. theses) are done

468

Automated Logic Restructuring with aSPFDs 1.1 Chapter Overview  

E-Print Network [OSTI]

Chapter 1 Automated Logic Restructuring with aSPFDs 1.1 Chapter Overview This chapter presents a comprehensive methodology to automate logic restructuring in combinational and sequential circuits designs that fail functional verification at locations identified by a debugging 1 #12;2 1 Automated Logic

Veneris, Andreas

469

Automated Steel Cleanliness Analysis Tool (ASCAT)  

SciTech Connect (OSTI)

The objective of this study was to develop the Automated Steel Cleanliness Analysis Tool (ASCATTM) to permit steelmakers to evaluate the quality of the steel through the analysis of individual inclusions. By characterizing individual inclusions, determinations can be made as to the cleanliness of the steel. Understanding the complicating effects of inclusions in the steelmaking process and on the resulting properties of steel allows the steel producer to increase throughput, better control the process, reduce remelts, and improve the quality of the product. The ASCAT (Figure 1) is a steel-smart inclusion analysis tool developed around a customized next-generation computer controlled scanning electron microscopy (NG-CCSEM) hardware platform that permits acquisition of inclusion size and composition data at a rate never before possible in SEM-based instruments. With built-in customized ''intelligent'' software, the inclusion data is automatically sorted into clusters representing different inclusion types to define the characteristics of a particular heat (Figure 2). The ASCAT represents an innovative new tool for the collection of statistically meaningful data on inclusions, and provides a means of understanding the complicated effects of inclusions in the steel making process and on the resulting properties of steel. Research conducted by RJLG with AISI (American Iron and Steel Institute) and SMA (Steel Manufactures of America) members indicates that the ASCAT has application in high-grade bar, sheet, plate, tin products, pipes, SBQ, tire cord, welding rod, and specialty steels and alloys where control of inclusions, whether natural or engineered, are crucial to their specification for a given end-use. Example applications include castability of calcium treated steel; interstitial free (IF) degasser grade slag conditioning practice; tundish clogging and erosion minimization; degasser circulation and optimization; quality assessment/steel cleanliness; slab, billet or bloom disposition; and alloy development. Additional benefits of ASCAT include the identification of inclusions that tend to clog nozzles or interact with refractory materials. Several papers outlining the benefits of the ASCAT have been presented and published in the literature. The paper entitled ''Inclusion Analysis to Predict Casting Behavior'' was awarded the American Iron and Steel Institute (AISI) Medal in 2004 for special merit and importance to the steel industry. The ASCAT represents a quantum leap in inclusion analysis and will allow steel producers to evaluate the quality of steel and implement appropriate process improvements. In terms of performance, the ASCAT (1) allows for accurate classification of inclusions by chemistry and morphological parameters, (2) can characterize hundreds of inclusions within minutes, (3) is easy to use (does not require experts), (4) is robust, and (5) has excellent image quality for conventional SEM investigations (e.g., the ASCAT can be utilized as a dual use instrument). In summary, the ASCAT will significantly advance the tools of the industry and addresses an urgent and broadly recognized need of the steel industry. Commercialization of the ASCAT will focus on (1) a sales strategy that leverages our Industry Partners; (2) use of ''technical selling'' through papers and seminars; (3) leveraging RJ Lee Group's consulting services, and packaging of the product with a extensive consulting and training program; (4) partnering with established SEM distributors; (5) establishing relationships with professional organizations associated with the steel industry; and (6) an individualized plant by plant direct sales program.

Gary Casuccio (RJ Lee Group); Michael Potter (RJ Lee Group); Fred Schwerer (RJ Lee Group); Dr. Richard J. Fruehan (Carnegie Mellon University); Dr. Scott Story (US Steel)

2005-12-30T23:59:59.000Z

470

Opportunities for Automated Demand Response in Wastewater Treatment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Opportunities for Automated Demand Response in Wastewater Treatment Opportunities for Automated Demand Response in Wastewater Treatment Facilities in California - Southeast Water Pollution Control Plant Case Study Title Opportunities for Automated Demand Response in Wastewater Treatment Facilities in California - Southeast Water Pollution Control Plant Case Study Publication Type Report LBNL Report Number LBNL-6056E Year of Publication 2012 Authors Olsen, Daniel, Sasank Goli, David Faulkner, and Aimee T. McKane Date Published 12/2012 Publisher CEC/LBNL Keywords market sectors, technologies Abstract This report details a study into the demand response potential of a large wastewater treatment facility in San Francisco. Previous research had identified wastewater treatment facilities as good candidates for demand response and automated demand response, and this study was conducted to investigate facility attributes that are conducive to demand response or which hinder its implementation. One years' worth of operational data were collected from the facility's control system, submetered process equipment, utility electricity demand records, and governmental weather stations. These data were analyzed to determine factors which affected facility power demand and demand response capabilities.

471

Automating the Selection of Fenestration Systems to Best Meet Daylighting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Automating the Selection of Fenestration Systems to Best Meet Daylighting Automating the Selection of Fenestration Systems to Best Meet Daylighting Performance Goals Title Automating the Selection of Fenestration Systems to Best Meet Daylighting Performance Goals Publication Type Conference Paper LBNL Report Number LBNL-53003 Year of Publication 2003 Authors Fernandes, Luis L., and Konstantinos M. Papamichael Conference Name 2003 International Building Performance Simulation Association Conference Date Published 02/2003 Conference Location Eindhoven, Netherlands Call Number LBNL-53003 Abstract Traditional selection of fenestration systems follows a trial-and-error approach, i.e., iterative selection of fenestration systems and evaluation of their performance through the use of simulation tools and techniques. This paper is about the development of a new method, which inverts traditional practice, i.e., aims at automated selection of fenestration systems that best meet specific lighting performance goals. The new method is based on manipulation of matrices that represent the optical properties of fenestration systems, the propagation of light in interior spaces, and the outdoors luminous conditions. The method follows two steps: 1) the determination of the luminous flux distribution originating from the location of the fenestration that best meets the desired lighting performance goals and 2) the selection of the fenestration system that comes closer to producing the desired flux distribution from the outdoor daylight distribution.

472

White Paper Series An Overview of Automated Enforcement  

E-Print Network [OSTI]

a driver that ran a red light (1). The 2011 Traffic Safety Culture Index by AAA found that ninety Pedestrian and Bicyclist Safety December 2012 Bryan Poole, UNC HSRC/PBIC For: Federal Highway Administration on pedestrian and bicycle safety. The final section discusses how automated enforcement systems should be seen

North Carolina at Chapel Hill, University of

473

Automated Selection of Synthetic Biology Parts for Genetic Regulatory Networks  

E-Print Network [OSTI]

Automated Selection of Synthetic Biology Parts for Genetic Regulatory Networks Fusun Yaman: Raising the level of abstraction for synthetic biology design requires solving several challenging problems, including mapping abstract designs to DNA sequences. In this paper we present the first formalism

Densmore, Douglas

474

Workflow automation for processing plasma fusion simulation data  

Science Journals Connector (OSTI)

The Center for Plasma Edge Simulation project aims to automate the tedious tasks of monitoring the simulation, archiving and post-processing the output. This paper describes the tasks and requirements, the several components developed within the Kepler ... Keywords: Kepler, SSH, checkpointing, plasma fusion, scientific workflow

Norbert Podhorszki; Bertram Ludaescher; Scott A. Klasky

2007-06-01T23:59:59.000Z

475

ARES: automated response function code. Users manual. [HPGAM and LSQVM  

SciTech Connect (OSTI)

This ARES user's manual provides detailed instructions for a general understanding of the Automated Response Function Code and gives step by step instructions for using the complete code package on a HP-1000 system. This code is designed to calculate response functions of NaI gamma-ray detectors, with cylindrical or rectangular geometries.

Maung, T.; Reynolds, G.M.

1981-06-01T23:59:59.000Z

476

Facing the Unpredictable: Automated Adaption of IT Change Plans  

E-Print Network [OSTI]

of confidence and optimization. Change Management, a core ITIL process part of Service Transition, ensuresFacing the Unpredictable: Automated Adaption of IT Change Plans for Unpredictable Management of Computer Science 85748 Garching, Germany kemper@in.tum.de Abstract--Change Management, a core process

Kemper, Alfons

477

Automation of port facilities for import of GNL  

Science Journals Connector (OSTI)

This article examines the implementation of port terminals intended for the import of liquified natural gas in Brazilian territory and its importance to assure the continuity of energy offer, which historically has been one of the main factors limiting ... Keywords: GNL, automation, power resources, regaseification, terminal

Andr Seichi Ribeiro Kuramoto; Nilson Magalhes Bueno; Walter Da Silva Frazo Filho; Eduardo Mario Dias; Caio Fernando Fontana

2009-07-01T23:59:59.000Z

478

Key words: STREAMLINE, yeast, scale up, automation, sanitization.  

E-Print Network [OSTI]

adsorption by defining a realistic process example at small scale and taking it all the way up to a fullyKey words: STREAMLINE, yeast, scale up, automation, sanitization. Abstract This application note was evaluated by performing a sanitization study in which the column and system were challenged with culture

Lebendiker, Mario

479

Proceedings of the 2002 IEEE International Conferenceon Robotics 8 Automation  

E-Print Network [OSTI]

-peetrajectorycoordination arises in weld- ing and painting workcells in the automotive industry. We identifysuficientProceedings of the 2002 IEEE International Conferenceon Robotics 8 Automation Washington, DC May 2002 Coordinatingthe Motions of Multiple Robots with Specified Trajectories SrinivasAkella Departmentof

Hutchinson, Seth

480

Automation of the Gun M.Grecki, MSK Group  

E-Print Network [OSTI]

Automation of the Gun M.Grecki, MSK Group #12;GUN at FLASH normal conducting cavity no probe power fluctuates #12;Field calibration for RF-Gun Vfield = Vfor + Vref Vfield = A1*ei1 (Vm_for + A2 *ei2 #12;Fitting data to resonance curve #12;Before calibration After calibration RF Gun field measurement

Note: This page contains sample records for the topic "automated guideways inclined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Automation of the Gun M.Grecki, MSK Group  

E-Print Network [OSTI]

Automation of the Gun M.Grecki, MSK Group #12;GUN at FLASH normal conducting cavity power ­ works perfectly in steady-state conditions ­ long transients when RF power fluctuates #12;Gun temperature regulation #12;GUN temperature & klystron power (steady-state, FF+FB) temperature [°C] reflected

482

Security plan for the Automated Transportation Management System  

SciTech Connect (OSTI)

The Automated Transportation Management System (ATMS) is an unclassified non-sensitive system consisting of hardware and software designed to facilitate the shipment of goods for the US Department of Energy (DOE). The system is secured against waste, fraud, abuse, misuse, and programming errors through a series of security measures that are discussed in detail in this document.

Not Available

1994-04-01T23:59:59.000Z

483

Improving eigenpairs of automated multilevel substructuring with subspace iterations  

Science Journals Connector (OSTI)

This paper improves the eigenpair approximations obtained from the automated multilevel substructuring (AMLS) method by subspace iterations. Two variants of AMLS hybrid Subspace Iteration Method (AMLS-SIMa and AMLS-SIMb) are proposed. AMLS-SIMa is a ... Keywords: AMLS, Eigenvalue, Eigenvector, Subspace iteration

Jiacong Yin; Heinrich Voss; Pu Chen

2013-04-01T23:59:59.000Z

484

IPR: Automated Interaction Process Reconciliation Zongxia Du1  

E-Print Network [OSTI]

IPR: Automated Interaction Process Reconciliation Zongxia Du1 , Jinpeng Huai1 , Yunhao Liu2 reconciliation algorithm, called IPR (Interaction Process Reconciliation) based on Petri Net, which is able a prototype IPR server in our lab, and evaluate our design by comprehensive experiments. Results show that IPR

Liu, Yunhao

485

Automated Assessment of Polyethylene Wear in Cemented Acetabular Components using  

E-Print Network [OSTI]

Automated Assessment of Polyethylene Wear in Cemented Acetabular Components using Anteroposterior, Ninewells Hospital, Dundee, DD1 9SY, UK Abstract Polyethylene wear in the acetabular components of hip to the polyethylene acetabular component of a prosthesis so that both it and the metal femoral head component can

St Andrews, University of

486

Automated Design, Analysis, and Optimization of Turbomachinery Disks  

E-Print Network [OSTI]

Automated Design, Analysis, and Optimization of Turbomachinery Disks A thesis submitted of Cincinnati June 2008 Committee Chair: Dr. Mark G. Turner #12;#12;ABSTRACT Turbomachinery disks are used weight. Proper design and optimization of turbomachinery disks is an important topic that could yield

Cincinnati, University of

487

Automated Analysis of Performance and Energy Consumption for Cloud Applications  

E-Print Network [OSTI]

Automated Analysis of Performance and Energy Consumption for Cloud Applications Feifei Chen, John providers is thus to develop resource provisioning and management solutions at minimum energy consumption system performance and energy consumption patterns in complex cloud systems is imperative to achieve

Schneider, Jean-Guy

488

Exploiting Home Automation Protocols for Load Monitoring in Smart Buildings  

E-Print Network [OSTI]

load con- sumes, e.g., to enable automated demand response. Al- though load monitoring and control, Sean Barker, Aditya Mishra, Prashant Shenoy, and Jeannie Albrecht University of Massachusetts Amherst@cs.williams.edu Abstract Monitoring and controlling electrical loads is crucial for demand-side energy management in smart

Massachusetts at Amherst, University of

489

Flux: Enhancing Photo Organization through Interaction and Automation  

E-Print Network [OSTI]

Flux: Enhancing Photo Organization through Interaction and Automation Dominikus Baur, Otmar for digital photo collections, we pro- vide methods for organizing and sharing photos in a convenient manner of scalabil- ity, which is especially relevant for a real-world sized photo collection is tackled

490

An Automated Software FMEA Chris Price and Neal Snooke  

E-Print Network [OSTI]

An Automated Software FMEA Chris Price and Neal Snooke Department of Computer Science, Aberystwyth Conference, Singapore, April 2008 Abstract The concept of software failure mode and effects analysis (FMEA its hardware counterpart, software FMEA is immensely tedious for an engineer to perform, as well

Snooke, Neal

491

Building the case for automated building energy management  

Science Journals Connector (OSTI)

Energy consumption in buildings comprises a significant fraction of total worldwide energy consumption and is strongly influenced by occupant behavior. To explore the quantitative effect of particular occupant actions on building energy consumption, ... Keywords: building automation, energy saving behaviors, in-home display

Alan Marchiori; Qi Han; William C. Navidi; Lieko Earle

2012-11-01T23:59:59.000Z

492

Automated Planning for Hydrothermal Vent Prospecting Using AUVs  

E-Print Network [OSTI]

Automated Planning for Hydrothermal Vent Prospecting Using AUVs Zeyn A Saigol A thesis submitted of searching the ocean floor for hydrothermal vents, using autonomous under- water vehicles (AUVs decision process (POMDP), but with a very large state space (of the order of 10123 states). This size

Yao, Xin

493

Automated Configuration of Algorithms for Solving Hard Computational Problems  

E-Print Network [OSTI]

characteristics. Automated configuration procedures can facilitate algorithm development and be applied on the end. Inf., Darmstadt University of Technology, 2004 A THESIS SUBMITTED IN PARTIAL FULFILLMENT of such procedures separates high-level cognitive tasks carried out by humans from tedious low-level tasks that can

Hutter, Frank

494

Automated Test Coverage Measurement for Reactor Protection System Software  

E-Print Network [OSTI]

Automated Test Coverage Measurement for Reactor Protection System Software Implemented in Function- ing a case study using test cases prepared by domain experts for reactor protection system software) are widely used to implement safety- critical systems such as nuclear reactor protection systems, testing

495

Identifying novel drug indications through automated reasoning Authors and Affiliations  

E-Print Network [OSTI]

of these drugs have potential anti-cancer activities based on information on their targets and molecular discovery, text mining, automated reasoning Abstract Background With the large amount of pharmacological interaction types alone. A total of 507 drugs were found to have the potential to be used for cancer

Baral, Chitta

496

TEMPORAL PERFORMANCE EVALUATION OF CONTROL ARCHITECTURE IN AUTOMATION  

E-Print Network [OSTI]

TEMPORAL PERFORMANCE EVALUATION OF CONTROL ARCHITECTURE IN AUTOMATION SYSTEMS Pascal Meunier, Bruno systems are strongly linked to the performances of their control architecture. These architectures are the merger of a hardware structure ­ industrial computers and logic controllers connected to networks

Paris-Sud XI, Université de

497

Automation of Multi-leg One-loop virtual Amplitudes  

E-Print Network [OSTI]

In the last few years, much progress has been made in the computation of one-loop virtual matrix elements for processes involving many external particles. In this contribution the methods that have enabled this recent progress are briefly reviewed with a focus on their computing and automation aspects.

D. Maitre

2010-06-29T23:59:59.000Z

498

UAV Consumable Replenishment: Design Concepts for Automated Service Stations  

Science Journals Connector (OSTI)

A key requirement for the complete autonomy of an unmanned aerial vehicle (UAV) is the replenishment of its energy source and other consumables. Such processes are typically overseen and conducted by a human operator, may be time consuming and effectively ... Keywords: Automated consumable replenishment, Autonomy, Axiomatic Design, Enabling technologies, Service stations, Unmanned aerial vehicles

F. Paulo Kemper; Koji A. Suzuki; James R. Morrison

2011-01-01T23:59:59.000Z

499

Transportable automated ammonia sensor based on a pulsed thermoelectrically cooled  

E-Print Network [OSTI]

Transportable automated ammonia sensor based on a pulsed thermoelectrically cooled quantum single-frequency, thermoelectrically cooled, pulsed quantum-cascade laser with an embedded distributed absorption spectroscopy with a pulsed QC DFB laser was reported in Ref. 3, where wavelength modulation

500

Occupancy-Driven Energy Management for Smart Building Automation  

E-Print Network [OSTI]

Occupancy-Driven Energy Management for Smart Building Automation Yuvraj Agarwal, Bharathan Balaji Buildings are among the largest consumers of electricity in the US. A significant portion of this energy use a building simulation framework and the occupancy information from our testbed, we show potential energy sav

Gupta, Rajesh