National Library of Energy BETA

Sample records for attachments http eetd

  1. EETD Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    etc.) -Software tools -Deep energy retrofits * Indoor ... modeling and systems engineering Major New Initiatives: * ... -Industrial energy -Water and energy * Next ...

  2. EETD Special Initiatives

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Government around common agenda Smart Grid and DER Address integration of Distributed Energy Resources and development of Micro- grids to address power needs of growing ...

  3. eetd.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Law" Moore's Law Microprocessors have become smaller, denser, and more powerful. Gordon Moore (co-founder of Intel) predicted in 1965 that the transistor density of semiconductor...

  4. http://www

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schematic showing generic flight plan for sampling fields of cumulus within the plume emanating from Oklahoma City Source: http://www.asp.bnl.gov/ASP_ST_mtg_pres_2006/10.26_Berkowitz_CHAPS.pdf

  5. http://www

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Instruments and the Probes to which they are attached CHAPS 07 G-1 Instruments rev. 07-2-20 Instrument CVI non-CVI Gases Other PI TSI-3563 Neph 1 Ogren/Andrews TSI-3010 CPC 1 Ogren/Andrews PSAP Radiance 0 Laulainen PSAP NOAA 1 Ogren/Andrews AMS 1 Lee/Alexander FIMS 1 Wang LAPA-1 1 Dubey TRAC 1 Laskin TDL H2O 1 Ogren/Andrews CVI control 1 Ogren/Andrews CVI flow meters ? Ogren/Andrews CVI pumps 2 Ogren/Andrews CVI heat 0 Ogren/Andrews CVI zero air bottle 1 Ogren/Andrews CVI data system 1

  6. The value of energy data

    Energy Savers [EERE]

    EnergyCodesandStandardsg.pdf 2 http:www.encelium.comenemssix-strategies.html 3 http:eetd.lbl.govsitesallfileslightingcontrolsincommercialbuil...

  7. V-206: Apache HTTP Server mod_rewrite and "httpOnly" Cookie Disclosure...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6: Apache HTTP Server modrewrite and "httpOnly" Cookie Disclosure Vulnerabilities V-206: Apache HTTP Server modrewrite and "httpOnly" Cookie Disclosure Vulnerabilities July 30,...

  8. Attachment C

    Office of Environmental Management (EM)

    PLAN Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT C Page C-i ATTACHMENT C WASTE ANALYSIS PLAN TABLE OF CONTENTS C-0 Introduction and Attachment Highlights ........................................................................... 1 C-0a Waste Characterization ........................................................................................ 2 C-0b AK

  9. Attachment A

    Office of Environmental Management (EM)

    GENERAL FACILITY DESCRIPTION AND PROCESS INFORMATION Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Draft Hazardous Waste Permit April 2014 PERMIT ATTACHMENT A Page A-i ATTACHMENT A GENERAL FACILITY DESCRIPTION AND PROCESS INFORMATION TABLE OF CONTENTS A-1 Facility Description ......................................................................................................... 1 A-2 Description of Activities

  10. Attachment B

    Office of Environmental Management (EM)

    B HAZARDOUS WASTE PERMIT APPLICATION PART A Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 PERMIT ATTACHMENT B Page B-i of 52 ATTACHMENT B HAZARDOUS WASTE PERMIT APPLICATION PART A TABLE OF CONTENTS PART A - HAZARDOUS WASTE PERMIT APPLICATION ......................................................... 1 RCRA PART A APPLICATION CERTIFICATION

  11. Attachment D

    Office of Environmental Management (EM)

    RCRA CONTINGENCY PLAN Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT D Page D-i ATTACHMENT D RCRA CONTINGENCY PLAN TABLE OF CONTENTS Introduction ................................................................................................................................ 1 D-1 General Information

  12. Attachment E

    Office of Environmental Management (EM)

    E INSPECTION SCHEDULE, PROCESS AND FORMS Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 PERMIT ATTACHMENT E Page E-i ATTACHMENT E INSPECTION SCHEDULE, PROCESS AND FORMS TABLE OF CONTENTS Introduction ................................................................................................................................. 1 E-1 Inspection Schedule

  13. Attachment F

    Office of Environmental Management (EM)

    TRAINING Waste Isolation Pilot Plant Hazardous Waste Permit December 21, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit December 21, 2012 PERMIT ATTACHMENT F Page F-i ATTACHMENT F PERSONNEL TRAINING TABLE OF CONTENTS Introduction ................................................................................................................................. 1 F-1 Outline of the Training Program

  14. Attachment G

    Office of Environmental Management (EM)

    G CLOSURE PLAN Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT G Page G-i ATTACHMENT G CLOSURE PLAN TABLE OF CONTENTS Introduction ................................................................................................................................. 1 G-1 Closure Plan

  15. Attachment L

    Office of Environmental Management (EM)

    L WIPP GROUNDWATER DETECTION MONITORING PROGRAM PLAN Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT L Page L-i ATTACHMENT L WIPP GROUNDWATER DETECTION MONITORING PROGRAM PLAN TABLE OF CONTENTS L-1 Introduction ..................................................................................................................... 1 L-1a Geologic and Hydrologic

  16. Attachment N

    Office of Environmental Management (EM)

    N VOLATILE ORGANIC COMPOUND MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT N Page N-i ATTACHMENT N VOLATILE ORGANIC COMPOUND MONITORING PLAN TABLE OF CONTENTS N-1 Introduction ..................................................................................................................... 1 N-1a Background

  17. Attachment O

    Office of Environmental Management (EM)

    O WIPP MINE VENTILATION RATE MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit May 8, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit May 8, 2012 PERMIT ATTACHMENT O Page O-1 of 14 1 ATTACHMENT O 2 WIPP MINE VENTILATION RATE MONITORING PLAN 3 TABLE OF CONTENTS 4 O-1 Definitions ....................................................................................................................... 2 5 O-2 Objective

  18. ATTACHMENT A

    Office of Environmental Management (EM)

    A4 TRAFFIC PATTERNS Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT A4 Page A4-i ATTACHMENT A4 TRAFFIC PATTERNS TABLE OF CONTENTS A4-1 Traffic Information and Traffic Patterns ............................................................................ 1 A4-2 Facility Access and Traffic

  19. ATTACHMENT J

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contract No. DE-AC02-07CH11358 Contract Modification No. 0145 Section J, Appendix A J-A-1 ATTACHMENT J.1 APPENDIX A ADVANCE UNDERSTANDINGS ON HUMAN RESOURCES Applicable to the...

  20. Attachment K

    Office of Environmental Management (EM)

    SOLID WASTE MANAGEMENT UNIT (SWMU) AND AREA OF CONCERN (AOC) TABLES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT K Page K-i ATTACHMENT K SOLID WASTE MANAGEMENT UNIT (SWMU) AND AREA OF CONCERN (AOC) TABLES LIST OF TABLES Table Title Table K-1 Solid Waste Management Units (SWMUs) & Areas of Concern (AOCs) Requiring Corrective Action Table K-2 SWMUs & AOCs

  1. Window Attachments

    Broader source: Energy.gov (indexed) [DOE]

    DCCurcija@lbl.gov Lawrence Berkeley National Laboratory Window Attachments 2015 Building Technologies Office Peer Review 2 Project Summary Timeline: Start date: 10/1/2013 Planned end date: 9/30/2018 Key Milestones: 1. CGDB Releases (2); 3/31; 9/30/2015 2. Validated simulation methods for priority window attachments; 9/30/2015 Budget: Total DOE $ to date: $1,100k Total future DOE $: $2,100k [estimated] Key Partners: Project Goal: Develop validated simulation models and procedures for

  2. name SRSCRO description url http www srscro org namespaces oembed...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    description url http www srscro org namespaces oembed authentication routes namespace methods GET endpoints methods GET args context required false default view links self http...

  3. T-728: Apache Tomcat HTTP DIGEST Authentication Weaknesses Let...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8: Apache Tomcat HTTP DIGEST Authentication Weaknesses Let Remote Users Conduct Bypass Attacks T-728: Apache Tomcat HTTP DIGEST Authentication Weaknesses Let Remote Users Conduct...

  4. Source: Greentech Media; http://www.greentechmedia.com/articles...

    Broader source: Energy.gov (indexed) [DOE]

    Source: Greentech Media; http:www.greentechmedia.comarticlesreadchart-of-the-day- solyndra-edition...

  5. High Performance Window Attachments

    Energy Savers [EERE]

    High Performance Window Attachments D. Charlie Curcija Lawrence Berkeley National Laboratory dccurcija@lbl.gov 510-495-2602 April 4, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Impact of Project: * Motivate manufacturers to make improvements in Window systems U-Factors, SHGC and daylighting utilization * Increase awareness of benefits from energy efficient window attachments Problem Statement: * A wide range of residential window attachments are available, but

  6. Attachment A1

    Office of Environmental Management (EM)

    A1 CONTAINER STORAGE Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT A1 Page A1-i ATTACHMENT A1 CONTAINER STORAGE TABLE OF CONTENTS Introduction ................................................................................................................................. 1 A1-1 Container Storage

  7. Attachment A2

    Office of Environmental Management (EM)

    A2 GEOLOGIC REPOSITORY Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT A2 Page A2-i ATTACHMENT A2 GEOLOGIC REPOSITORY TABLE OF CONTENTS A2-1 Description of the Geologic Repository ............................................................................ 1 A2-2 Geologic Repository Design and Process Description ..................................................... 2

  8. Attachment C1

    Office of Environmental Management (EM)

    C1 WASTE CHARACTERIZATION TESTING METHODS Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 PERMIT ATTACHMENT C1 Page C1-i ATTACHMENT C1 WASTE CHARACTERIZATION TESTING METHODS TABLE OF CONTENTS Introduction ................................................................................................................................. 1 C1-1 Radiography

  9. Attachment C4

    Office of Environmental Management (EM)

    C4 TRU MIXED WASTE CHARACTERIZATION USING ACCEPTABLE KNOWLEDGE Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 PERMIT ATTACHMENT C4 Page C4-i ATTACHMENT C4 TRU MIXED WASTE CHARACTERIZATION USING ACCEPTABLE KNOWLEDGE TABLE OF CONTENTS C4-1 Introduction ..................................................................................................................... 1 C4-2

  10. Attachment C6

    Office of Environmental Management (EM)

    C6 AUDIT AND SURVEILLANCE PROGRAM Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT C6 Page C6-i ATTACHMENT C6 AUDIT AND SURVEILLANCE PROGRAM TABLE OF CONTENTS C6-1 Introduction ..................................................................................................................... 1 C6-2 Audit Procedures

  11. Attachment C7

    Office of Environmental Management (EM)

    C7 TRU WASTE CONFIRMATION Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 PERMIT ATTACHMENT C7 Page C7-i ATTACHMENT C7 TRU WASTE CONFIRMATION TABLE OF CONTENTS Introduction ................................................................................................................................. 1 C7-1 Permittee Confirmation of TRU Mixed Waste

  12. Attachment G3

    Office of Environmental Management (EM)

    G3 RADIOLOGICAL SURVEYS TO INDICATE POTENTIAL HAZARDOUS WASTE RELEASES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT G3 Page G3-i ATTACHMENT G3 RADIOLOGICAL SURVEYS TO INDICATE POTENTIAL HAZARDOUS WASTE RELEASES TABLE OF CONTENTS G3-1 Purpose ........................................................................................................................... 1

  13. Attachment H1

    Office of Environmental Management (EM)

    H1 ACTIVE INSTITUTIONAL CONTROLS DURING POST-CLOSURE Waste Isolation Pilot Plant Hazardous Waste Permit November 1, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 1, 2012 PERMIT ATTACHMENT H1 Page H1-i ATTACHMENT H1 ACTIVE INSTITUTIONAL CONTROLS DURING POST-CLOSURE TABLE OF CONTENTS Introduction ................................................................................................................................. 1 H1.1 Active

  14. Attachment C3

    Office of Environmental Management (EM)

    C3 QUALITY ASSURANCE OBJECTIVES AND DATA VALIDATION TECHNIQUES FOR WASTE CHARACTERIZATION METHODS Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT C3 Page C3-i ATTACHMENT C3 QUALITY ASSURANCE OBJECTIVES AND DATA VALIDATION TECHNIQUES FOR WASTE CHARACTERIZATION METHODS TABLE OF CONTENTS C3-1 Validation Methods

  15. Attachment C5

    Office of Environmental Management (EM)

    C5 QUALITY ASSURANCE PROJECT PLAN REQUIREMENTS Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 PERMIT ATTACHMENT C5 Page C5-i ATTACHMENT C5 QUALITY ASSURANCE PROJECT PLAN REQUIREMENTS TABLE OF CONTENTS C5-1 Quality Assurance Project Plans ...................................................................................... 1 C5-2 Document Review, Approval, and Control

  16. Attachment F2

    Office of Environmental Management (EM)

    F2 TRAINING COURSE AND QUALIFICATION CARD OUTLINES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT F2 Page F2-i ATTACHMENT F2 TRAINING COURSE AND QUALIFICATION CARD OUTLINES TABLE OF CONTENTS Course Outlines .......................................................................................................................... 1 GET-19X/GET-20X/GET-21X - General

  17. Attachment G2

    Office of Environmental Management (EM)

    G2 WASTE ISOLATION PILOT PLANT SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT G2 Page G2-i ATTACHMENT G2 WASTE ISOLATION PILOT PLANT SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT ADAPTED FROM: SAND96-1326/1 DISTRIBUTION UNLIMITED RELEASE CATEGORY UC-721 PRINTED AUGUST 1996 WASTE ISOLATION PILOT PLANT

  18. Attachment N1

    Office of Environmental Management (EM)

    N1 HYDROGEN AND METHANE MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit January 31, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit January 31, 2012 PERMIT ATTACHMENT N1 Page N1-i ATTACHMENT N1 HYDROGEN AND METHANE MONITORING PLAN TABLE OF CONTENTS N1-1 Introduction ..................................................................................................................... 1 N1-2 Parameters to be Analyzed and Monitoring Design

  19. Micromechanical die attachment surcharge

    DOE Patents [OSTI]

    Filter, William F. (Albuquerque, NM); Hohimer, John P. (Albuquerque, NM)

    2002-01-01

    An attachment structure is disclosed for attaching a die to a supporting substrate without the use of adhesives or solder. The attachment structure, which can be formed by micromachining, functions purely mechanically in utilizing a plurality of shaped pillars (e.g. round, square or polygonal and solid, hollow or slotted) that are formed on one of the die or supporting substrate and which can be urged into contact with various types of mating structures including other pillars, a deformable layer or a plurality of receptacles that are formed on the other of the die or supporting substrate, thereby forming a friction bond that holds the die to the supporting substrate. The attachment structure can further include an alignment structure for precise positioning of the die and supporting substrate to facilitate mounting the die to the supporting substrate. The attachment structure has applications for mounting semiconductor die containing a microelectromechanical (MEM) device, a microsensor or an integrated circuit (IC), and can be used to form a multichip module. The attachment structure is particularly useful for mounting die containing released MEM devices since these devices are fragile and can otherwise be damaged or degraded by adhesive or solder mounting.

  20. http://ndep.nv.gov/bwm/landfill.htm

    National Nuclear Security Administration (NNSA)

    http:ndep.nv.govbwmlandfill.htm TS Power Plant Landfill Newmount, Nevada Energy Investment Operating - Class III Permitted Eureka County Humboldt County Regional Landfill...

  1. http://www.epa.gov/air/data/index.html

    National Nuclear Security Administration (NNSA)

    AirData Page 1 of 1 AirData | US EPA 5/25/2011 http://www.epa.gov/air/data/index.html

  2. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, Gary L. (Alpine, CA)

    1994-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion.

  3. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, G.L.

    1994-12-13

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion. 3 figures.

  4. Internal pipe attachment mechanism

    DOE Patents [OSTI]

    Bast, Richard M. (Livermore, CA); Chesnut, Dwayne A. (Pleasanton, CA); Henning, Carl D. (Livermore, CA); Lennon, Joseph P. (Livermore, CA); Pastrnak, John W. (Livermore, CA); Smith, Joseph A. (Livermore, CA)

    1994-01-01

    An attachment mechanism for repairing or extending fluid carrying pipes, casings, conduits, etc. utilizing one-way motion of spring tempered fingers to provide a mechanical connection between the attachment mechanism and the pipe. The spring tempered fingers flex to permit insertion into a pipe to a desired insertion depth. The mechanical connection is accomplished by reversing the insertion motion and the mechanical leverage in the fingers forces them outwardly against the inner wall of the pipe. A seal is generated by crushing a sealing assembly by the action of setting the mechanical connection.

  5. Ladder attachment platform

    DOE Patents [OSTI]

    Swygert,; Richard, W [Springfield, SC

    2012-08-28

    A ladder attachment platform is provided that includes a base for attachment to a ladder that has first and second side rails and a plurality of rungs that extend between in a lateral direction. Also included is a user platform for having a user stand thereon that is carried by the base. The user platform may be positioned with respect to the ladder so that it is not located between a first plane that extends through the first side rail and is perpendicular to the lateral direction and a second plane that extends through the second side rail and is perpendicular to the lateral direction.

  6. Magnetically attached sputter targets

    DOE Patents [OSTI]

    Makowiecki, D.M.; McKernan, M.A.

    1994-02-15

    An improved method and assembly for attaching sputtering targets to cathode assemblies of sputtering systems which includes a magnetically permeable material is described. The magnetically permeable material is imbedded in a target base that is brazed, welded, or soldered to the sputter target, or is mechanically retained in the target material. Target attachment to the cathode is achieved by virtue of the permanent magnets and/or the pole pieces in the cathode assembly that create magnetic flux lines adjacent to the backing plate, which strongly attract the magnetically permeable material in the target assembly. 11 figures.

  7. Internal pipe attachment mechanism

    DOE Patents [OSTI]

    Bast, R.M.; Chesnut, D.A.; Henning, C.D.; Lennon, J.P.; Pastrnak, J.W.; Smith, J.A.

    1994-12-13

    An attachment mechanism is described for repairing or extending fluid carrying pipes, casings, conduits, etc. utilizing one-way motion of spring tempered fingers to provide a mechanical connection between the attachment mechanism and the pipe. The spring tempered fingers flex to permit insertion into a pipe to a desired insertion depth. The mechanical connection is accomplished by reversing the insertion motion and the mechanical leverage in the fingers forces them outwardly against the inner wall of the pipe. A seal is generated by crushing a sealing assembly by the action of setting the mechanical connection. 6 figures.

  8. http://www.cemp.dri.edu/cemp/climate/

    National Nuclear Security Administration (NNSA)

    Climatological and Gamma Radiation Summary Select a station from the list Alamo Nevada Go Page 1 of 1 Community Environmental Monitoring Program | CEMP - DOE 5/15/2011 http://www.cemp.dri.edu/cemp/climate/

  9. http://www.wrcc.dri.edu/summary/nvut.html

    National Nuclear Security Administration (NNSA)

    in such cases. Western Regional Climate Center, wrcc@dri.edu Big Ben Ranger Stn (COOP) Page 1 of 1 WRCC cgi generated image map 5162011 http:www.wrcc.dri.edusummarynvut.html...

  10. Turbine nozzle attachment system

    DOE Patents [OSTI]

    Norton, Paul F. (San Diego, CA); Shaffer, James E. (Maitland, FL)

    1995-01-01

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine.

  11. Turbine nozzle attachment system

    DOE Patents [OSTI]

    Norton, P.F.; Shaffer, J.E.

    1995-10-24

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and is attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine. 3 figs.

  12. Attachment F- Bibliography and References

    Broader source: Energy.gov [DOE]

    These documents are listed in Attachment F - Bibliography and References section of the Phase 2 Radiological Release Accident Investigation Report.

  13. Ceramic blade attachment system

    DOE Patents [OSTI]

    Frey, deceased, Gary A. (late of Poway, CA); Jimenez, Oscar D. (Escondia, CA)

    1996-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed therebetween. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. And, a pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade.

  14. Ceramic blade attachment system

    DOE Patents [OSTI]

    Frey, G.A.; Jimenez, O.D.

    1996-12-03

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed between them. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. A pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade. 4 figs.

  15. Appendix TFIELD Attachment A: Attachment A: TFIELD-2014 Visualization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment A: TFIELD-2014 Visualization United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Compliance Recertification Application 2014 Attachment A: TFIELD-2014 Visualization This attachment contains figures for Appendix TFIELD-2014, related to the Culebra T-Field calibration process, performed as part of the 2009 Compliance Recertification Application (CRA-2009) Performance Assessment Baseline Calculation (PABC). These parameter inputs and

  16. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

  17. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

  18. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-01-10

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figures.

  19. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-07-11

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figs.

  20. Attachment 6 - Government Property List

    National Nuclear Security Administration (NNSA)

    2 EQUIPMENT - HANDHELD COMPUTER - WIRELESS WHEEL LOAD SYSTEM 1 EQUIPMENT - HEAT STRESS MONITOR 5 EQUIPMENT - HOIST - PORTABLE 1 November 20, 2013 DE-SOL-0005982 Attachment 6...

  1. http://www.hanford.gov/boards/hab/response/107.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    065 Advice # 107 From: Richard T. French Ms. Merilyn B. Reeves, Chair Hanford Advisory Board 723 The Parkway, Suite 200: B1 -41 Richland, Washington 99352 Dear Ms. Reeves: RESPONSE TO COMMENTS ON HANFORD ADVISORY BOARD (HAB) CONSENSUS ADVICE #107 This letter and its attachments are in response to Advice #107 to the U.S. Department of Energy, Office of River Protection (ORP) on its Fiscal Year (FY) 2002 Integrated Priority List (IPL). We appreciate your participation in the FY 2002 budget

  2. T-598: Apache Tomcat HTTP BIO Connector Error Discloses Information From Different Requests to Remote Users

    Broader source: Energy.gov [DOE]

    When using HTTP pipelining, the system may return information from a different request to a remote user. The vulnerability resides in the HTTP BIO connector.

  3. http://www.epa.gov/climateleaders/smallbiz/footprint.html

    National Nuclear Security Administration (NNSA)

    you Climate Leaders Page 1 of 2 How to Calculate your Carbon Footprint | Climate Leaders | US EPA 5/25/2011 http://www.epa.gov/climateleaders/smallbiz/footprint.html collect data each year to track progress toward reaching an emissions reduction goal using the Simplified Inventory Management Plan (IMP) (MS Word) (14 pp, 305K) Need help developing your GHG Inventory? Ask a question. Attend free training webinars on developing an inventory and reducing GHG emissions. What Do I Do Next? Join the

  4. Attachment C: Optional AIP Provisions

    Broader source: Energy.gov [DOE]

    This attachment contains sample language for a number of optional provisions that sites may choose to include or not to include in their AIPs. Optional AIP provisions are not mandatory and the...

  5. Attachment 1 - Performance Work Statement

    National Nuclear Security Administration (NNSA)

    including TTR. Waste acceptance services will be performed at the NNSS and at waste generator sites. DE-SOL-0005982 Attachment 1 Page 1 2. Scope of Work 2.1 Requirement: The EPS...

  6. ATTACHMENT J.3 - APPENDIX C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    No.: DE-AC02-09CH11466 Section J - Appendix C J-C-1 ATTACHMENT J.3 APPENDIX C SPECIAL FINANCIAL INSTITUTION ACCOUNT AGREEMENT Applicable to the Operation of PPPL Contract No. ...

  7. ATTACHMENT

    Broader source: Energy.gov (indexed) [DOE]

    Pages. Under Estimated Total Size, you will see the original file size and the 3. Click OK to accept the file size compression. compressed file size. U.S. Department of Energy,...

  8. ATTACHMENT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ...www.osti.govestsc241- 4pre.jsp C. FINANCIAL REPORTING SF-425, Federal Financial ... Theory behind the model, expressed in non-mathematical terms; e. Mathematics to be used, ...

  9. Attachment L-1 - Entity Certificates

    National Nuclear Security Administration (NNSA)

    3] Attachment L-1 1 ENTITY CERTIFICATE The offeror shall submit evidence to substantiate the authority of the person signing the offer and submit in Volume I of the proposal. CERTIFICATE I, _______________________________________________, certify that I have the signatory authority as the _________________________________________ to sign this offer/contract on behalf of said entity and to bind the entity by the authority of its governing body and within the scope of its powers. Affix the

  10. Attachment D: Mandatory Provisions if Applicable

    Broader source: Energy.gov [DOE]

    This attachment contains provisions that may be mandatory for an AIP if the State: (1) chooses to develop an emergency response program but does not want to use the suggested language in Attachment...

  11. Microsoft Word - Attachment J.doc

    Office of Environmental Management (EM)

    Waste Isolation Pilot Plant Hazardous Waste Permit April 15, 2011 PERMIT ATTACHMENT J Page J-i ATTACHMENT J HAZARDOUS WASTE MANAGEMENT UNIT TABLES LIST OF TABLES Table Title...

  12. Microsoft Word - Attachment I.doc

    Office of Environmental Management (EM)

    SCHEDULE RESERVED Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT I Page I-i ATTACHMENT I COMPLIANCE SCHEDULE RESERVED

  13. Microsoft Word - Attachment M.doc

    Office of Environmental Management (EM)

    M FIGURES RESERVED Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT M Page M-i ATTACHMENT M FIGURES RESERVED

  14. Attachment A -- Deliverables.xls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    B - J Deliverables Attachment A TOC Deliverables DE-AC27-08RV14800 SEC. Contract Section Description Action Timing TFP CO ESQ OPA IR/HR ORP MGR DCAA B B.2 Modify contract to obligate funds (DOE action). Modify Contract As Required L S B B.3 Modify Table B-1 as Required by Equitable Adjustments (DOE Action). Modify Contract As Required S L S C C.2.1.1-1 Transition Plan Review/Approve 10 Days after NTP L S S C C.2.1.1-2 Statement of Material Differences Review/Approve/Mod 60 Days after NTP L S S S

  15. Attachment A -- Deliverables.xls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I Deliverables Attachment A TOC Deliverables DE-AC27-08RV14800 SEC. FAR/DEAR Clause Reference Description Action Timing TFP CO ESQ OPA IR/HR ORP MGR DCAA I.2 FAR 52.202-1 Definitions (JUL 2004) as supplemented by DEAR 952.202-1 (Mar 2002) Verify compliance As Required L I.3 FAR 52.203-3 Gratuities (APR 1984) Verify compliance As Required L I.4 FAR 52.203-5 Covenant Against Contingent Fees (APR 1984) Verify compliance As Required L I.5 FAR 52.203-6 Restrictions on Subcontractor Sales to the

  16. Split ring containment attachment device

    DOE Patents [OSTI]

    Sammel, Alfred G. (Pittsburgh, PA)

    1996-01-01

    A containment attachment device 10 for operatively connecting a glovebag 200 to plastic sheeting 100 covering hazardous material. The device 10 includes an inner split ring member 20 connected on one end 22 to a middle ring member 30 wherein the free end 21 of the split ring member 20 is inserted through a slit 101 in the plastic sheeting 100 to captively engage a generally circular portion of the plastic sheeting 100. A collar potion 41 having an outer ring portion 42 is provided with fastening means 51 for securing the device 10 together wherein the glovebag 200 is operatively connected to the collar portion 41.

  17. ATTACHMENT J.1 - APPENDIX A

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    36 Contract No. DE-AC02-09CH11466 Section J - Appendix A J-A-1 ATTACHMENT J.1 APPENDIX A ADVANCED UNDERSTANDINGS ON HUMAN RESOURCES Applicable to the Operation of Princeton Plasma Physics Laboratory Contract No. DE-AC02-09CH11466 Modification No. 0136 Contract No. DE-AC02-09CH11466 Section J - Appendix A J-A-2 Table of Contents Appendix A PRINCETON PLASMA PHYSICS LABORATORY ADVANCE UNDERSTANDING ON HUMAN RESOURCES I. INTRODUCTION II. HUMAN RESOURCES STRATEGY, BUSINESS PLANNING AND PERFORMANCE

  18. ATTACHMENT J.7 - APPENDIX G

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modification No. 0199 Contract No. DE-AC02-09CH11466 Section J - Appendix G J-G-1 ATTACHMENT J.7 APPENDIX G PURCHASING SYSTEM REQUIREMENTS Applicable to the Operation of PPPL Contract No. DE-AC02-09CH11466 Modification No. 0199 Contract No. DE-AC02-09CH11466 Section J - Appendix G J-G-2 Appendix G Purchasing System Requirements This Appendix and Clause I.146 "Contractor Purchasing System," sets forth DOE requirements applicable to the Purchasing System established under the Contract

  19. DNA attachment to support structures

    DOE Patents [OSTI]

    Balhorn, Rodney L. (Livermore, CA); Barry, Christopher H. (Fresno, CA)

    2002-01-01

    Microscopic beads or other structures are attached to nucleic acids (DNA) using a terminal transferase. The transferase adds labeled dideoxy nucleotide bases to the ends of linear strands of DNA. The labels, such as the antigens digoxigenin and biotin, bind to the antibody compounds or other appropriate complementary ligands, which are bound to the microscopic beads or other support structures. The method does not require the synthesis of a synthetic oligonucleotide probe. The method can be used to tag or label DNA even when the DNA has an unknown sequence, has blunt ends, or is a very large fragment (e.g., >500 kilobase pairs).

  20. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment O

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    O DE-AC36-08GO28308 Modification M1033 Attachment O

  1. http://www.em.doe.gov/Pages/groundwaterReport.aspx?plumeCode...

    Office of Environmental Management (EM)

    Record 992011 http:www.em.doe.govPagesgroundwaterReport.aspx?plumeCode175 Environmental Indicators (EIs) Groundwater Migration Under Control? Yes Confirmed by Lead...

  2. http://www.sord.nv.doe.gov/products/climate/wind-roses/MEDA/med

    National Nuclear Security Administration (NNSA)

    Page 1 of 1 5/16/2011 http://www.sord.nv.doe.gov/products/climate/wind-roses/MEDA/meda-35/rose_13.gif

  3. http://geohazards.usgs.gov/cfusion/qfault/qf_web_disp.cfm?qfaul

    National Nuclear Security Administration (NNSA)

    AND RANGE Reliability of location Good Compiled at 1:100,000 scale. Page 1 of 1 Database Search 782011 http:geohazards.usgs.govcfusionqfaultqfwebdisp.cfm?qfaultor115

  4. http://geohazards.usgs.gov/cfusion/qfault/qf_web_disp.cfm?qfaul

    National Nuclear Security Administration (NNSA)

    ... Canyon, in the eastern margin of Stonewall Flat. Fault ID Comments: Page 1 of 1 Database Search 5202011 http:geohazards.usgs.govcfusionqfaultqfwebdisp.cfm?qfaultor111

  5. http://geohazards.usgs.gov/cfusion/qfault/qf_web_disp.cfm?qfaul

    National Nuclear Security Administration (NNSA)

    scale aerial photographs compiled on a 100,000 scale topographic map. Page 1 of 1 Database Search 5202011 http:geohazards.usgs.govcfusionqfaultqfwebdisp.cfm?qfaultor116

  6. http://geohazards.usgs.gov/cfusion/qfault/qf_web_disp.cfm?qfaul

    National Nuclear Security Administration (NNSA)

    ... zones of the SRMM (TRW Environmental Safety Systems Inc., 1998 3907). Page 1 of 1 Database Search 5202011 http:geohazards.usgs.govcfusionqfaultqfwebdisp.cfm?qfaultor90

  7. Methane production by attached film

    DOE Patents [OSTI]

    Jewell, William J. (202 Eastwood Ave., Ithaca, NY 14850)

    1981-01-01

    A method for purifying wastewater of biodegradable organics by converting the organics to methane and carbon dioxide gases is disclosed, characterized by the use of an anaerobic attached film expanded bed reactor for the reaction process. Dilute organic waste material is initially seeded with a heterogeneous anaerobic bacteria population including a methane-producing bacteria. The seeded organic waste material is introduced into the bottom of the expanded bed reactor which includes a particulate support media coated with a polysaccharide film. A low-velocity upward flow of the organic waste material is established through the bed during which the attached bacterial film reacts with the organic material to produce methane and carbon dioxide gases, purified water, and a small amount of residual effluent material. The residual effluent material is filtered by the film as it flows upwardly through the reactor bed. In a preferred embodiment, partially treated effluent material is recycled from the top of the bed to the bottom of the bed for further treatment. The methane and carbon dioxide gases are then separated from the residual effluent material and purified water.

  8. Microsoft Word - Policy Flash 2010-77 Attachment | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 Attachment Microsoft Word - Policy Flash 2010-77 Attachment Microsoft Word - Policy Flash 2010-77 Attachment More Documents & Publications Microsoft Word - Policy Flash 2010-78...

  9. Microsoft Word - Attachment 3 Recovery Act notification | Department...

    Energy Savers [EERE]

    Microsoft Word - Attachment 3 Recovery Act notification Microsoft Word - Attachment 3 Recovery Act notification More Documents & Publications Microsoft Word - Attachment 3 Recovery...

  10. Microsoft Word - Policy Flash 2010-81 Attachment 1 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 More Documents & Publications Microsoft Word - Policy Flash...

  11. Attachment C - Summary GHG Emissions Data FINAL | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - Summary GHG Emissions Data FINAL Attachment C - Summary GHG Emissions Data FINAL File Attachment C - Summary GHG Emissions Data FINAL More Documents & Publications Attachment C

  12. Attachment C Summary GHG Emissions Data FINAL | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summary GHG Emissions Data FINAL Attachment C Summary GHG Emissions Data FINAL File Attachment-C-Summary-GHG-Emissions-Data-FINAL.xlsx More Documents & Publications Attachment C -

  13. Attached is Policy Flash 2013-44 Acquisition Guide- Allowability...

    Energy Savers [EERE]

    Attached is Policy Flash 2013-44 Acquisition Guide- Allowability of Incurred Costs Attached is Policy Flash 2013-44 Acquisition Guide- Allowability of Incurred Costs Attached is...

  14. Attachment FY2011-75 OPAM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OPAM Attachment FY2011-75 OPAM Federal Supply Schedules Attachment FY2011-75 OPAM More Documents & Publications Chapter 8 - Required Sources of Supplies and Services Attachment...

  15. Microsoft Word - Attachment J-4 Legal Management Plan.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4-1 ATTACHMENT J.4. LEGAL MANAGEMENT

  16. AttachmentFlash_2010-55.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AttachmentFlash2010-55.pdf More Documents & Publications AttachmentFlash2010-66.pdf AttachmentFlash2010-73(3).pdf AttachmentFlash2010-33(2).pdf...

  17. Cladding Attachment Over Thick Exterior Rigid Insulation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cladding Attachment Over Thick Exterior Rigid Insulation Peter Baker, P.Eng. BA Webinar: High Performance Enclosure Strategies: Part II, New Construction Cladding Attachment Over Thick Exterior Rigid Insulation Background  Industry trend to using exterior rigid insulation  Increased thermal value  Condensation resistance  Increased air tightness (possibly)  Increased rainwater management (possibly)  Need to develop a means to attach cladding over thick layers of exterior

  18. Bonneville Power Administration Attachment P Oversupply Management...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    reduced generation in order to meet the Transmission Customers' schedules. The Oversupply Management Protocol will apply as follows: 1. The term of this attachment is March 31,...

  19. Introducing the Attachments Energy Ratings Council

    Broader source: Energy.gov [DOE]

    In collaboration with the U.S. Department of Energy (DOE), the Window Covering Manufacturers Association (WCMA) has launched the Attachments Energy Ratings Council (AERC).

  20. DE-SOL-0008445 Attachment L-4

    National Nuclear Security Administration (NNSA)

    DE-SOL-0008445 Attachment L-4 Page 1 of 4 PAST PERFORMANCE QUESTIONNAIRE The Department of Energy (DOE), National Nuclear Security Administration (NNSA) is interested in your...

  1. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment K

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    K DE-AC36-08GO28308 Modification M1033 Attachment K Diversity Plan Diversity Plan CY2014 is hereby incorporated as Attachment K of the contract

  2. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment C

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    C DE-AC36-08GO28308 Modification M1033 Attachment C Small Business Subcontracting Plan

  3. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment S

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    S DE-AC36-08GO28308 Modification M1033 Attachment S Human Resources Compensation Plan

  4. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment T

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    T DE-AC36-08GO28308 Modification M1033 Attachment T Human Resources Workforce Plan

  5. High Performance Window Attachments | Department of Energy

    Office of Environmental Management (EM)

    High Performance Window Attachments High Performance Window Attachments Emerging Technologies Project for the 2013 Building Technologies Office's Program Peer Review PDF icon emrgtech20_curcija_040413.pdf More Documents & Publications Advanced Facades, Daylighting, and Complex Fenestration Systems Fenestration Software Tools OpenStudio - 2013 Peer Review

  6. Microsoft Word - Attachment F1.doc

    Office of Environmental Management (EM)

    F1 RCRA HAZARDOUS WASTE MANAGEMENT JOB TITLES AND DESCRIPTIONS Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT F1 Page F1-i ATTACHMENT F1 RCRA HAZARDOUS WASTE MANAGEMENT JOB TITLES AND DESCRIPTIONS TABLE OF CONTENTS Job

  7. Microsoft Word - Attachment H.doc

    Office of Environmental Management (EM)

    H POST-CLOSURE PLAN Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT H Page H-i ATTACHMENT H POST-CLOSURE PLAN TABLE OF CONTENTS Introduction ................................................................................................................................... 1 H-1 Post-Closure Plan

  8. http://www.regulations.gov/#!documentDetail;D=EERE-2014-BT-STD...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    www.regulations.govdocumentDetail;DEERE-2014-BT-STD-0031-0002 EERE-2014-BT-STD-0031-0002 spreadsheet Sheet "Summary Switching" - Before ME1 19421032v.1 http:...

  9. http://www.leg.state.nv.us/nac/nac-445a.html

    National Nuclear Security Administration (NNSA)

    systems to supply water and other pertinent features on the surface. Page 332 of 343 NAC: CHAPTER 445A - WATER CONTROLS 7112011 http:www.leg.state.nv.usnacnac-445a.html...

  10. http://www.regulations.gov/#!documentDetail;D=EERE-2014-BT-STD-0031-0002

    Broader source: Energy.gov (indexed) [DOE]

    http://www.regulations.gov/#!documentDetail;D=EERE-2014-BT-STD-0031-0002 EERE-2014-BT-STD-0031-0002 spreadsheet Sheet "Summary Switching" - Before ME1 19421032v.1 http://www.regulations.gov/#!documentDetail;D=EERE-2014-BT-STD-0031-0002 EERE-2014-BT-STD-0031-0002 spreadsheet Sheet "Summary Switching" - Available for download now ME1 19421032v.1

  11. Nuclear reactor fuel rod attachment system

    DOE Patents [OSTI]

    Not Available

    1980-09-17

    A reusable system is described for removably attaching a nuclear reactor fuel rod to a support member. A locking cap is secured to the fuel rod and a locking strip is fastened to the support member. The locking cap has two opposing fingers shaped to form a socket having a body portion. The locking strip has an extension shaped to rigidly attach to the socket's body portion. The locking cap's fingers are resiliently deflectable. For attachment, the locking cap is longitudinally pushed onto the locking strip causing the extension to temporarily deflect open the fingers to engage the socket's body portion. For removal, the process is reversed.

  12. EECBG SEP Attachment 1 - Process metric list

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... IT systems or software packages purchased Number of energy efficient outdoor area lights purchased 2 EECBG 10-07BSEP 10-006A Attachment 1: Process Metrics List Metric Area ...

  13. Microsoft Word - Attachment coversheet.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HANFORD MISSION SUPPORT CONTRACT ADVANCE UNDERSTANDING ON COST REVISED DECEMBER 31, 2014 Mission Support Contract Contract Number DE-AC06-09RL14728 Attachment J, Section J.8...

  14. EXHIBIT G7.0 Attachment 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    G7.0 Attachment 2 32014 Page 1 SUBCONTRACTOR CYBER SECURITY PLAN Vendor Name (if Applicable): Subcontract No. PR- Ex. G dated: XXXXXX Rev. No.: 7 Pursuant to the requirements in...

  15. River Corridor Closure Contract Section J, Attachment...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Contract No. DE-AC06-05RL14655 A000 1 ATTACHMENT J-12 GOVERNMENT-FURNISHED SERVICES AND INFORMATION (GFSI) GFSI Item Scope Description GFSI Description C.4 Hanford Site...

  16. Appendix DATA Attachment A: WIPP Borehole Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment A: WIPP Borehole Update Table of Contents DATA-A-1.0 WIPP Boreholes...

  17. ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT

    Energy Savers [EERE]

    ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT Site: Federal or Contractor Program: Name: ____________________________________________ Title:______________________________________________ Organization:_______________________________________ Address: __________________________________________ Bldg and Room Number _____________________________ Phone Number __________________ E-Mail ________________________________ Years of Records Management experience? Length of time in current position? Training?

  18. SECTION L ? ATTACHMENT A - PERFORMANCE GUARANTEE AGREEMENT

    National Nuclear Security Administration (NNSA)

    Guarantor affirms that the Government shall not be Request for Proposal No. DE-SOL-0008418 Section L, Attachment A, Page 2 required to first commence any action or obtain...

  19. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, James M. (Albuquerque, NM); Luna, Daniel A. (Los Lunas, NM); Gwinn, Kenneth W. (Cedar Crest, NM)

    1998-01-01

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening.

  20. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, James M. (Albuquerque, NM); Luna, Daniel A. (Los Lunas, NM); Gwinn, Kenneth W. (Cedar Crest, NM)

    1997-01-01

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening.

  1. Composite Underbody Attachment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Underbody Attachment Composite Underbody Attachment 2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. PDF icon lm024_norris_2010_o.pdf More Documents & Publications Polymer Composites Research in the LM Materials Program Overview TMAC User Program Vehicle Technologies Office Merit Review 2015: Laser-Assisted Joining Process of Aluminum and Carbon Fiber Components

  2. Microsoft Word - Attachment G1.doc

    Office of Environmental Management (EM)

    DETAILED DESIGN REPORT FOR AN OPERATION PHASE PANEL CLOSURE SYSTEM Adapted from DOE/WIPP 96-2150 Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G1 Page G1-i ATTACHMENT G1 DETAILED DESIGN REPORT FOR AN OPERATION PHASE PANEL CLOSURE SYSTEM TABLE OF CONTENTS Executive Summary

  3. Microsoft Word - Attachment J.doc

    Office of Environmental Management (EM)

    UNIT TABLES Waste Isolation Pilot Plant Hazardous Waste Permit April 15, 2011 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit April 15, 2011 PERMIT ATTACHMENT J Page J-i ATTACHMENT J HAZARDOUS WASTE MANAGEMENT UNIT TABLES LIST OF TABLES Table Title Table J-1 Waste Handling Building (WHB) Container Storage Unit Table J-2 Parking Area Container Storage Unit Table J-3 Underground Hazardous Waste Disposal Units Waste Isolation Pilot Plant Hazardous Waste Permit

  4. Microsoft Word - Policy Flash 2010-81 Attachment 2 | Department...

    Office of Environmental Management (EM)

    81 Attachment 2 Microsoft Word - Policy Flash 2010-81 Attachment 2 Microsoft Word - Policy Flash 2010-81 Attachment 2 More Documents & Publications ATTACHMENTFLASH2010.81(2)-OPAM...

  5. Microsoft Word - Policy Flash 2011-2 Attachment 1 | Department...

    Energy Savers [EERE]

    Microsoft Word - Policy Flash 2011-2 Attachment 1 Microsoft Word - Policy Flash 2011-2 Attachment 1 Microsoft Word - Policy Flash 2011-2 Attachment 1 More Documents & Publications...

  6. Microsoft Word - Policy Flash 2010-81 Attachment 1 | Department...

    Energy Savers [EERE]

    Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 More Documents &...

  7. Microsoft Word - Policy Flash 2010-67 Attachment 1 | Department...

    Office of Environmental Management (EM)

    67 Attachment 1 Microsoft Word - Policy Flash 2010-67 Attachment 1 Microsoft Word - Policy Flash 2010-67 Attachment 1 More Documents & Publications Acquisition Letter 2009-03...

  8. Attachment FY2011-83 OPAM | Department of Energy

    Office of Environmental Management (EM)

    3 OPAM Attachment FY2011-83 OPAM Federal Supply Schedules Attachment FY2011-83 OPAM More Documents & Publications Chapter 8 - Required Sources of Supplies and Services Attachment...

  9. ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT PDF icon ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT More Documents & Publications Assessment B - Program Criteria Assessment C-Site Visit Protocol Records Management Handbook

  10. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment M

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    M DE-AC36-08GO28308 Modification M1033 Attachment M Equal Opportunity Program Incorporated by Reference In Modification M004

  11. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment N

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    N DE-AC36-08GO28308 Modification M1033 Attachment N Supplemental Requirements To Laws, Regulations, And Doe Directives

  12. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachments H

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    H DE-AC36-08GO28308 Modification M1033 Attachment H Performance Guarantee Agreement Incorporated by Reference In Modification M004

  13. Building America Expert Meeting: Cladding Attachment Over Exterior...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cladding Attachment Over Exterior Insulation Building America Expert Meeting: Cladding Attachment Over Exterior Insulation Building Science Corporation (BSC) held an expert meeting...

  14. Property:NEPA ApplicationAttachments | Open Energy Information

    Open Energy Info (EERE)

    ApplicationAttachments Jump to: navigation, search Property Name NEPA ApplicationAttachments Property Type Page Description FONSI files for NEPA Docs. For example: Cover letters,...

  15. Attachment 3: Instructions for Use of Green Lease Solicitation...

    Energy Savers [EERE]

    Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart...

  16. Attachment 2: Solicitation for Offers with New and Revised Green...

    Energy Savers [EERE]

    Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text PDF icon Solicitation for...

  17. Attachment 1: Green Lease Policies and Procedures for Lease Acquisitio...

    Energy Savers [EERE]

    Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition PDF icon Green Lease Policies and...

  18. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment J

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    J DE-AC36-08GO28308 Modification M1033 Attachment J Performance Evaluation And Measurement Plan FY 2015 Performance Evaluation And Measurement Plan dated May 11, 2015, Rev 4, is hereby incorporated into this contract by reference as Section J, Attachment J

  19. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment L

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    L DE-AC36-08GO28308 Modification M1033 Attachment L Employee Concerns Program (ECP) Implementation Plan The Employee Concerns Program Plan, dated January 22, 2015, is hereby incorporated into this contract by reference as Section J, Attachment L

  20. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment P

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    P DE-AC36-08GO28308 Modification M1033 Attachment P Five Year Strategic Plan NREL's Five-Year Plan (FY15-FY19), dated October 23, 2014, Rev 2, is hereby incorporated into this contract by reference as Section J, Attachment P

  1. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment Q

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Q DE-AC36-08GO28308 Modification M1033 Attachment Q Organizational Conflict Of Interest Management Plan Organizational Conflicts of Interest Management Plan and Implementation Program, Volumes I and II, dated October 6, 2014, are hereby incorporated into this contract by reference as Section J, Attachment Q

  2. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment R

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    R DE-AC36-08GO28308 Modification M1033 Attachment R Organizational Conflict Of Interest Implementation Program Organizational Conflicts of Interest Management Plan and Implementation Program, Volumes I and II, dated October 6, 2014, are hereby incorporated into this contract by reference as Section J, Attachment R

  3. Nuclear reactor fuel rod attachment system

    DOE Patents [OSTI]

    Christiansen, David W. (Kennewick, WA)

    1982-01-01

    A reusable system for removably attaching a nuclear reactor fuel rod (12) to a support member (14). A locking cap (22) is secured to the fuel rod (12) and a locking strip (24) is fastened to the support member (14). The locking cap (22) has two opposing fingers (24a and 24b) shaped to form a socket having a body portion (26). The locking strip has an extension (36) shaped to rigidly attach to the socket's body portion (26). The locking cap's fingers are resiliently deflectable. For attachment, the locking cap (22) is longitudinally pushed onto the locking strip (24) causing the extension (36) to temporarily deflect open the fingers (24a and 24b) to engage the socket's body portion (26). For removal, the process is reversed.

  4. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, J.M.; Luna, D.A.; Gwinn, K.W.

    1998-12-08

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening. 22 figs.

  5. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, J.M.; Luna, D.A.; Gwinn, K.W.

    1997-11-18

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening. 22 figs.

  6. Microsoft Word - Attachment A3.doc

    Office of Environmental Management (EM)

    A3 DRAWING NUMBER 51-W-214-W UNDERGROUND FACILITIES TYPICAL DISPOSAL PANEL Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT A3 Page A3-1 of 1 Drawing 51-W-214-W Underground Facilities Typical Disposal Panel 1

  7. Annual Report Outline (IDIQ Attachment J-10) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report Outline (IDIQ Attachment J-10) Annual Report Outline (IDIQ Attachment J-10) Document offers an annual report outline sample for an energy savings performance contract. Microsoft Office document icon mv_annual_report.doc More Documents & Publications Post-Installation Report Outline (IDIQ Attachment J-9) Measurement and Verification Plan and Savings Calculations Methods Outline (IDIQ Attachment J-8) ESPC Task Order Financial Schedules (IDIQ Attachment J-6)

  8. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment G

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    G DE-AC36-08GO28308 Modification M1033 Attachment G Sensitive Foreign Nations Control In accordance with the Clause I.92, Sensitive Foreign Nations Controls, this Attachment sets forth the requirements the contractor shall comply with under this contract. (Reference DOE Order 142.3, or superseding directives.) Foreign National access to DOE sites, programs, information and technologies will be approved provided the access is needed to support the program objectives of DOE and/or objectives of

  9. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment I

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    I DE-AC36-08GO28308 Modification M1033 Attachment I Subcontracts, Purchase Orders And Other Actions Requiring DOE Review And Approval And Other Agreements Between The Parties This Attachment, implementing the Article entitled Contractor Purchasing System, sets forth the requirements for DOE's approval under the prime contract for the operation of the National Renewable Energy Laboratory. Subcontracts not binding on DOE Subcontracts and purchase orders shall be made in the name of Alliance, shall

  10. Methods of attaching erosion-resistant nonmetallic panels

    SciTech Connect (OSTI)

    Girzhel, A.M.

    1984-01-01

    Attachment methods for panels of wear-resistant nonmetallic materials, e.g. cast stone and slag, devitrified slag, and erosion-resistant and heat-resistant concretes to protect hopper, chute, and trough structures at metallurgical and coal industries have been investigated. Attachment methods can be divided into two groups, attachment by adhesives and by mechanical attachment. A new method of mechanical attachment, considered to be much superior to adhesive attachment, provides for reliable fastening without damage to the protected metal structure. Various panel designs may be used depending on the operating conditions.

  11. EECBG SEP Attachment 1 - Process metric list

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10-07B/SEP 10-006A Attachment 1: Process Metrics List Metric Area Metric Primary or Optional Metric Item(s) to Report On 1. Building Retrofits 1a. Buildings retrofitted, by sector Number of buildings retrofitted Square footage of buildings retrofitted 1b. Energy management systems installed, by sector Number of energy management systems installed Square footage of buildings under management 1c. Building roofs retrofitted, by sector Number of building roofs retrofitted Square footage of building

  12. Cladding Attachment Over Thick Exterior Insulating Sheathing

    SciTech Connect (OSTI)

    Baker, P.; Eng, P.; Lepage, R.

    2014-01-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1.What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2.Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3.What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

  13. Cladding Attachment Over Thick Exterior Insulating Sheathing

    SciTech Connect (OSTI)

    Baker, P.; Eng, P.; Lepage, R.

    2014-01-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1. What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2. Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3. What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

  14. http://www.opticsinfobase.org/abstract.cfm?uri=ao-22-1-95

    National Nuclear Security Administration (NNSA)

    Explosion dust particle size measurements R. G. Pinnick, G. Fernandez, and B. D. Hinds Applied Optics, Vol. 22, Issue 1, pp. 95-102 (1983) doi:10.1364/AO.22.000095 » View Full Text: Acrobat PDF (1689 KB) Citation R. G. Pinnick, G. Fernandez, and B. D. Hinds, "Explosion dust particle size measurements," Appl. Opt. 22, 95-102 (1983) http://www.opticsinfobase.org/abstract.cfm?URI=ao-22-1-95 Abstract * References (10) * Affiliations * Cited By * Abstract In situ measurements of the sizes

  15. Part III - List of Documents, Exhibits, and Other Attachments

    National Nuclear Security Administration (NNSA)

    ... Waste Management Manual DOE O 436.1, Attachment 1 CRD 050211 Departmental Sustainability 183 020612 DOE O 440.2C Chg 1, Attachment 1 CRD 06152011 Aviation Management ...

  16. Attachment FY2011-12 | Department of Energy

    Office of Environmental Management (EM)

    2 Attachment FY2011-12 Indirect Cost Rate Administration Attachment FY2011-12 More Documents & Publications AcqGuide42pt1.doc&0; Acquisition Letter No. AL 2008-02 Department of...

  17. Dual-shank attachment design for omega seals

    DOE Patents [OSTI]

    Sattinger, Stanley S.

    1978-01-01

    An improved apparatus and process for attaching welded omega seal segments to reactor heads, standpipes, mechanisms, and plugs comprises a first shank in combination with a second shank to attach an omega seal at a metal-to-metal interface.

  18. AttachmentFlash_2010-65.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    65.pdf AttachmentFlash2010-65.pdf PDF icon AttachmentFlash2010-65.pdf More Documents & Publications fac2001-26.pdf DOELabor Leadership Roundtable Meeting Generic copy of DOE's...

  19. Attachment FY2011-06 OPAM | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    SUMMARY OF PUBLIC LAW 111-240, THE SMALL BUSINESS JOBS ACT OF 2010 Attachment FY2011-06 OPAM More Documents & Publications Attachment FY2011-28 OPAM Chapter 19 - Small Business...

  20. SECTION L -ATTACHMENT B - LISTING OF KEY PERSONNEL

    National Nuclear Security Administration (NNSA)

    B, Page 1 SECTION L ATTACHMENT B LISTING OF KEY PERSONNEL TITLE NAME Note: Addremove extra rows if needed...

  1. EECBG SEP Attachment 1 - Process metric list | Department of Energy

    Energy Savers [EERE]

    SEP Attachment 1 - Process metric list EECBG SEP Attachment 1 - Process metric list Reporting Guidance Process Metric List PDF icon eecbg_10_07b_sep__10_006a_attachment1_process_metric_list.pdf More Documents & Publications EECBG 10-07C/SEP 10-006B Attachment 1: Process Metrics List EECBG Program Notice 10-07A DOE Recovery Act Reporting Requirements for the State Energy Program

  2. Cable attachment for a radioactive brachytherapy source capsule

    DOE Patents [OSTI]

    Gross, Ian G; Pierce, Larry A

    2006-07-18

    In cancer brachytherapy treatment, a small californium-252 neutron source capsule is attached to a guide cable using a modified crimping technique. The guide cable has a solid cylindrical end, and the attachment employs circumferential grooves micromachined in the solid cable end. The attachment was designed and tested, and hardware fabricated for use inside a radioactive hot cell. A welding step typically required in other cable attachments is avoided.

  3. Energy Savings from Window Attachments | Department of Energy

    Office of Environmental Management (EM)

    from Window Attachments Energy Savings from Window Attachments This study presents energy-modeling results for a large number of window combinations with window attachments in typical residential buildings and in varied climates throughout the United States. PDF icon energy_savings_from_windows_attachments.pdf More Documents & Publications Fenestration Software Tools Residential Windows and Window Coverings: A Detailed View of the Installed Base and User Behavior Building America Expert

  4. Photoswitchable method for the ordered attachment of proteins to surfaces

    DOE Patents [OSTI]

    Camarero, Julio A. (Livermore, CA); DeYoreo, James J. (Clayton, CA); Kwon, Youngeun (Livermore, CA)

    2011-07-05

    Described herein is a method for the attachment of proteins to any solid support with control over the orientation of the attachment. The method is extremely efficient, not requiring the previous purification of the protein to be attached, and can be activated by UV-light. Spatially addressable arrays of multiple protein components can be generated by using standard photolithographic techniques.

  5. Photoswitchable method for the ordered attachment of proteins to surfaces

    DOE Patents [OSTI]

    Camarero, Julio A.; De Yoreo, James J.; Kwon, Youngeun

    2010-04-20

    Described herein is a method for the attachment of proteins to any solid support with control over the orientation of the attachment. The method is extremely efficient, not requiring the previous purification of the protein to be attached, and can be activated by UV-light. Spatially addressable arrays of multiple protein components can be generated by using standard photolithographic techniques.

  6. AL2000-10Attach.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AL2000-10Attach.pdf AL2000-10Attach.pdf PDF icon AL2000-10Attach.pdf More Documents & Publications AL2000-10R.pdf AL2004-01r2.pdf Consent Order, Fluor Federal Services - EA-2000-10...

  7. Attachment 1: Green Lease Policies and Procedures for Lease Acquisition |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition PDF icon Green Lease Policies and Procedures for Lease Acquisition More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 4: Unrevised SFO Paragraphs Reissued

  8. Attachment 4: Unrevised SFO Paragraphs Reissued | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4: Unrevised SFO Paragraphs Reissued Attachment 4: Unrevised SFO Paragraphs Reissued PDF icon Unrevised SFO Paragraphs Reissued More Documents & Publications Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 1: Green Lease Policies and Procedures for Lease Acquisition 1

  9. Appendix DATA Attachment A: WIPP Borehole Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A: WIPP Borehole Update United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment A: WIPP Borehole Update Table of Contents DATA-A-1.0 WIPP Boreholes DATA-A-2.0 Individual Well Reports DATA-A-2.1 New Wells Drilled Since the CRA-2009 DATA-A-2.2 Plugged Wells DATA-A-3.0 References List of Tables Table DATA-A- 1. Status of WIPP Boreholes December 2012 WIPP Table DATA-A-1. Status of WIPP Boreholes December 2012 WIPP

  10. Microsoft Word - Attachment coversheet.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HANFORD MISSION SUPPORT CONTRACT ADVANCE UNDERSTANDING ON COST REVISED DECEMBER 31, 2014 Mission Support Contract Contract Number DE-AC06-09RL14728 Attachment J, Section J.8 Modification 479 ii CHANGE HISTORY Version Date Change Author Change Summary 6.0 December 31, 2014 Ricky Churchman Updated to incorporate: Retention as a part of the Hiring/Signing bonuses 5.1 August 26, 2014 Ricky Churchman Updated to incorporate: Use of Government/Contractor Leased Vehicles for Offsite Transportation 5.0

  11. Microsoft Word - ATTACHMENT A Suppl 5.doc

    Office of Environmental Management (EM)

    ATTACHMENT A: Modeling in Support of Additional Two-Unit Operating Configurations Unit 1 & Unit 2 Operation - SO2 Table Mirant Potomac, Alexandria, Virginia Maximum Impacts Predicted by AERMOD-PRIME Compliance Based on Highest, Second-Highest Short-term and Highest Annual Concentrations Units 1 & 2 on 24 hrs/day @ Max load SO2 = 0.31 lb/MBtu for both units. AERMOD- PRIME Monitored Background AERMOD-PRIME + Background NAAQS Distance Direction Ground Elevation Flagpole Elevation X (m) Y

  12. Predicting Envelope Leakage in Attached Dwellings

    SciTech Connect (OSTI)

    Faakye, O.; Arena, L.; Griffiths, D.

    2013-07-01

    The most common method for measuring air leakage is to use a single blower door to pressurize and/or depressurize the test unit. In detached housing, the test unit is the entire home and the single blower door measures air leakage to the outside. In attached housing, this 'single unit', 'total', or 'solo' test method measures both the air leakage between adjacent units through common surfaces as well air leakage to the outside. Measuring and minimizing this total leakage is recommended to avoid indoor air quality issues between units, reduce energy losses to the outside, reduce pressure differentials between units, and control stack effect. However, two significant limitations of the total leakage measurement in attached housing are: for retrofit work, if total leakage is assumed to be all to the outside, the energy benefits of air sealing can be significantly over predicted; for new construction, the total leakage values may result in failing to meet an energy-based house tightness program criterion. The scope of this research is to investigate an approach for developing a viable simplified algorithm that can be used by contractors to assess energy efficiency program qualification and/or compliance based upon solo test results.

  13. Vacuum die attach for integrated circuits

    DOE Patents [OSTI]

    Schmitt, E.H.; Tuckerman, D.B.

    1991-09-10

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required. 1 figure.

  14. Dissociative electron attachment studies on acetone

    SciTech Connect (OSTI)

    Prabhudesai, Vaibhav S. Tadsare, Vishvesh; Ghosh, Sanat; Gope, Krishnendu; Davis, Daly; Krishnakumar, E.

    2014-10-28

    Dissociative electron attachment (DEA) to acetone is studied in terms of the absolute cross section for various fragment channels in the electron energy range of 020 eV. H{sup ?} is found to be the most dominant fragment followed by O{sup ?} and OH{sup ?} with only one resonance peak between 8 and 9 eV. The DEA dynamics is studied by measuring the angular distribution and kinetic energy distribution of fragment anions using Velocity Slice Imaging technique. The kinetic energy and angular distribution of H{sup ?} and O{sup ?} fragments suggest a many body break-up for the lone resonance observed. The ab initio calculations show that electron is captured in the multi-centered anti-bonding molecular orbital which would lead to a many body break-up of the resonance.

  15. Vacuum die attach for integrated circuits

    DOE Patents [OSTI]

    Schmitt, Edward H.; Tuckerman, David B.

    1991-01-01

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required.

  16. Microsoft Word - Flash2008-09Attachment.doc | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    9Attachment.doc More Documents & Publications Flash2007-02Attachment.doc&0; Microsoft Word - AL2000-05Attachment.doc Flash2007-03Attachment.doc&0;...

  17. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Table of Contents

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    III SECTION J LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS TABLE OF CONTENTS Document Title Page Attachment A Personnel (Appendix A) ......................................................................................... ..3 Attachment B Key Personnel ......................................................................................................... 26 Attachment C Small Business Subcontracting Plan ...................................................................... 27

  18. Microsoft Word - Attachment J-5 Continuity of Operations Plan.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5-1 ATTACHMENT J.5 CONTINUITY OF OPERATIONS

  19. Dissociative electron attachments to ethanol and acetaldehyde: A combined

    Office of Scientific and Technical Information (OSTI)

    experimental and simulation study (Journal Article) | SciTech Connect Dissociative electron attachments to ethanol and acetaldehyde: A combined experimental and simulation study Citation Details In-Document Search Title: Dissociative electron attachments to ethanol and acetaldehyde: A combined experimental and simulation study Dissociation dynamics of the temporary negative ions of ethanol and acetaldehyde formed by the low-energy electron attachments is investigated by using the anion

  20. Cladding Attachment Over Thick Exterior Sheathing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cladding Attachment Over Thick Exterior Sheathing Cladding Attachment Over Thick Exterior Sheathing The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means

  1. Building America Expert Meeting: Cladding Attachment Over Exterior

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Insulation | Department of Energy Cladding Attachment Over Exterior Insulation Building America Expert Meeting: Cladding Attachment Over Exterior Insulation Building Science Corporation (BSC) held an expert meeting on Cladding Attachment Over Exterior Insulation on Saturday, July 28, 2012 at the Westford Regency Hotel in Westford, Massachusetts. Featured speakers included Jay Crandell of ARES Consulting, Peter Baker of BSC, Gary Parsons of DOW Chemical Company, Vladimir Kochkin of the

  2. Building America Expert Meeting: Cladding Attachment Over Exterior

    Energy Savers [EERE]

    Insulation | Department of Energy Cladding Attachment Over Exterior Insulation Building America Expert Meeting: Cladding Attachment Over Exterior Insulation Building Science Corporation (BSC) held an expert meeting on Cladding Attachment Over Exterior Insulation on Saturday, July 28, 2012 at the Westford Regency Hotel in Westford, Massachusetts. Featured speakers included Jay Crandell of ARES Consulting, Peter Baker of BSC, Gary Parsons of DOW Chemical Company, Vladimir Kochkin of the

  3. Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reference Chart | Department of Energy 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart PDF icon green_instructions_attach3.pdf More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Microsoft Word - AL2008-05.doc

  4. Investor Deal Summary Template (IDIQ Attachment J-11) | Department of

    Office of Environmental Management (EM)

    Energy Investor Deal Summary Template (IDIQ Attachment J-11) Investor Deal Summary Template (IDIQ Attachment J-11) Document features a template for summarizing an investor or energy service company's deal as part of an energy savings performance contract. Microsoft Office document icon ids.doc More Documents & Publications ESPC Task Order Financial Schedules (IDIQ Attachment J-6) ESPC ENABLE Final Proposal Requirements Model Energy Savings Performance Contract, Schedules, and Exhib

  5. Certification and Rating of Attachments for Fenestration Technologies

    Office of Environmental Management (EM)

    (DE-FOA-0001000) | Department of Energy Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) November 5, 2013 - 4:43pm Addthis This funding opportunity is closed Through this Funding Opportunity Announcement (FOA) the Building Technologies Office (BTO) seeks to establish a performance rating mechanism for assessing the energy performance of fenestration attachments. DOE

  6. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment E

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    E DE-AC36-08GO28308 Modification M1033 Attachment E Applicable Laws and Regulations (List A) Necessary and Sufficient Environmental, Safety and Health Standards CODE OF FEDERAL REGULATIONS (CFR) 7 CFR 340-Biotechnology Permits 10 CFR 8.4 - Interpretation by the General Counsel: AEC Jurisdiction 10 CFR 707 Workplace Substance Abuse Programs at DOE Sites 10 CFR 719 - Contractor Legal Management Requirements 10 CFR 835 - Occupational Radiation Protection 10 CFR 851 - Worker Safety and Health

  7. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment F

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    F DE-AC36-08GO28308 Modification M1033 Attachment F Operating and Administrative Requirements (List B) Prime Contract No. DE-AC36-08GO28308 The operating and administrative requirements, including the Contractor Requirements Documents of DOE directives listed below are applicable in whole or in part in accordance with clauses H-18 Application of DOE Contractor Requirements Documents and 970.5204-2, Laws, Regulations, and DOE Directives (DEC 2000). The concurrence analysis documenting

  8. Section L Attachment I - Summary and Fee Sheet Amendment 000002...

    National Nuclear Security Administration (NNSA)

    within the submitted MS Excel electronic spreadsheets and workbooks. Section L Attachment I Summary and Fee Sheet Amendment 000002 mulas and links intact and all cells...

  9. Microsoft Word - Policy Flash 2010-82 Attachment 1 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    2 Attachment 1 More Documents & Publications Policy Flash 2010-82 Microsoft Word - Policy Flash 2008-07.doc Microsoft Word - Policy Flash 2008-10.doc...

  10. Attachment 3 b. Part A Page 1 of 6

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment 3 b. Part A Page 1 of 6 Section A - General Terms and Conditions ................................................................................................ 2 A.1. Purpose .................................................................................................................................................. 2 A.2. Authority ............................................................................................................................................... 2

  11. FLASH2003-12attachment.pdf | Department of Energy

    Office of Environmental Management (EM)

    FLASH2003-12attachment.pdf More Documents & Publications Flash2004-19.pdf Document DOE Princeton Plasma Physics Laboratory Purchase Power Agreement Request for Proposal...

  12. SECTION L -ATTACHMENT B - LISTING OF KEY PERSONNEL

    National Nuclear Security Administration (NNSA)

    B, Page 1 SECTION L ATTACHMENT B LISTING OF KEY PERSONNEL TITLE NAME [Note: Add/remove extra rows if needed]

  13. Attachment 3: Instructions for Use of Green Lease Solicitation...

    Office of Environmental Management (EM)

    3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart PDF icon ...

  14. Attachment 1: Green Lease Policies and Procedures for Lease Acquisitio...

    Broader source: Energy.gov (indexed) [DOE]

    Green Lease Policies and Procedures for Lease Acquisition More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 2: Solicitation for ...

  15. Attachment 2: Solicitation for Offers with New and Revised Green...

    Energy Savers [EERE]

    2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text PDF icon Solicitation for Offers ...

  16. Microsoft Word - Attachment B - Reporting Requirements.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DE-SOL-0003339 J.1 ATTACHMENT B - REPORTING REQUIREMENTS REPORTING REQUIREMENTS CHECKLIST 1. AWARDEE: 2. IDENTIFICATION NUMBER: REPORT SUBMISSION: Reports shall be submitted to the...

  17. SECTION L ? ATTACHMENT C - INSTRUCTIONS FOR SMALL BUSINESS SUBCONTRAC...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (IT) concerns: and % (percentage of (1) above). Request for Proposal No. DE-SOL-0008418 Section L, Attachment C, Page 2 (iii) VOSB Concerns. Total estimated dollar...

  18. Standard Financing Offer Template (IDIQ Attachment J-12) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standard Financing Offer Template (IDIQ Attachment J-12) Document features a template to help communicate a finance offer as part of an energy savings performance contract. ...

  19. Attachment FY2011-9 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment FY2011-9 Attachment FY2011-9 FFRDC Determination for a Contract Competition More Documents & Publications Policy Flash 2013-30 Acquisition Letter on Acquisition Planning Considerations for Management and Operating Contracts Policy Flash 2013-78 Acquisition Guide Chapter 7.3 Acquisition Planning in the M&O Environment Chapter 7 - Acquisition Planning

  20. AttachmentFlash_2010-64.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4.pdf AttachmentFlash_2010-64.pdf PDF icon AttachmentFlash_2010-64.pdf More Documents & Publications Microsoft Word - FAC2005-27.doc Policy Flash 2015-07 - FAC 2005-78 Policy FLash 2014-36 FAC 2005-75

  1. al99-06attachment.doc | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    attachment.doc� More Documents & Publications Microsoft Word - AL2000-05Attachment.doc Microsoft Word - NSRC precompetitive User Agreement amended 1-18-07.doc EXHIBIT A: CRADA, WFO, PUA and NPUA Comparison Table, with suggested changes

  2. DE-SOL-0002555 WIPP Solicitation J-33 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT H: RESERVED

  3. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment U

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U DE-AC36-08GO28308 Modification M1033 Attachment U Treaties and International Agreements Intellectual property rights for subject inventions made under NREL's award under the JCERDC will be allocated as set forth in the Agreement between the Department of Energy of the United States of America and the Government of the Republic of India of November 4, 2010 for Cooperation on a Joint Clean Energy Research and Development Center (JCERDC), and its "Project Annex on Intellectual Property

  4. Microsoft Word - Attachment G2E.doc

    Office of Environmental Management (EM)

    E DESIGN DRAWINGS SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2E Page G2E-1 of 38 1 Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2E Page G2E-2 of 38 1 Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2E Page G2E-3 of

  5. DE-SOL-0008449 Attachment L-2b

    National Nuclear Security Administration (NNSA)

    level testing for NSDD Core installations DE-SOL-0008449 Attachment L-2b [Submit in Volume II, TAB 1] Instructions Attachment L-2b: Note: Attachment L-1a is limited to one (1) 8 ½ x 11 page limit. Experiences provided must be relevant to the work that the team member will be performing under this contract. The Offeror shall explain how the work performed by the experience is relevant to the indicator. Relevance is defined by Indicator as follows: A. Relevance to indicator A. is defined as

  6. Attachment FY2011-31 OPAM | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    attachment 3 flow chart of new 17.5 FAR Team update based on FAC2005-47 Dec 13, 2010 More Documents & Publications Flash2011-31 OPAM Flash2011-26 OPAM ATTACHMENTFLASH2011-26-OPAM...

  7. Attachment 3.a. Part A Page 1 of 6

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    highlights are instructions. Remove the instructions from the interagency agreement. Attachment 3.a. Part A Page 2 of 6 Section A - General Terms and Conditions A.1. Purpose Part...

  8. Microsoft Word - Policy Flash 2010-78 Attachment 1 Unsuccessful...

    Office of Environmental Management (EM)

    1 Unsuccessful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 1 Unsuccessful Offeror Letter Template-Final 8-17-10 Microsoft Word -...

  9. Microsoft Word - Policy Flash 2010-78 Attachment 3 Conflicts...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Conflicts of Interest Cert- template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 3 Conflicts of Interest Cert- template-Final 8-17-10 Microsoft Word -...

  10. Microsoft Word - Policy Flash 2010-78 Attachment 2 Confidentiality...

    Energy Savers [EERE]

    2 Confidentiality Cert template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 2 Confidentiality Cert template-Final 8-17-10 Microsoft Word - Policy Flash...

  11. Microsoft Word - Policy Flash 2010-78 Attachment 4 Successful...

    Office of Environmental Management (EM)

    4 Successful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 4 Successful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy...

  12. Attachment L-2a Relevant Corporate Experience Form

    National Nuclear Security Administration (NNSA)

    Submit in Volume II, TAB 1 DE-SOL-0008449 Attachment L-2a Item 13. Describe the nature and scope of the work as it relates to your proposed role in performing the DICCE2...

  13. River Corridor Closure Contract Section J, Attachment J-13

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Contract No. DE-AC06-08RL14655 A000 1 ATTACHMENT J-13 HANFORD SITE SERVICES Hanford Site Services are divided into three categories: Category 1: DOE will provide these Mandatory...

  14. Section L - Attachment D - Past-Performance Information Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on any problems encountered and your corrective actions.) Request for Proposal No. DE-SOL-0008418 Section L, Attachment E, Page 2 14. Current Status of Contract (Choose One) ...

  15. DE-SOL-0008449 Attachment L-2b

    National Nuclear Security Administration (NNSA)

    DE-SOL-0008449 Attachment L-2b Submit in Volume II, TAB 1 EXAMPLE Offeror: XYZ Company Indicator Summary Matrix Indicator Experience 1 Experience 2 Experience 3 A. Owned and...

  16. Attachment FY2011-58 OPAM | Department of Energy

    Energy Savers [EERE]

    INFORMATION REPORTING Attachment FY2011-58 OPAM More Documents & Publications Chapter 35 - Research and Development Contracting AcqGuide35pt1rev2.doc&0; Federal Assistance...

  17. River Corridor Closure Contract Section J, Attachment J-6

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 Contract No. DE-AC06-05RL14655 Mod 459 1 ATTACHMENT J-6 ADVANCE AGREEMENT, PERSONNEL, AND RELATED COSTS This attachment will be prepared subsequent to Contract award pursuant to Clause H.15, Advance Understanding on Costs. The advance understandings listed below are subject to the specific limitations, conditions, and exclusions of subpart 31.2 of FAR as supplemented by Department of Energy Acquisition Regulation (DEAR) 931.2. TYPE OF COST ALLOWABILITY CLARIFICATION Beryllium Testing/Travel

  18. PART III -LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 Occupational Medical Services at Hanford J-2-1 Section J Attachment J-2 LIST OF APPLICABLE DOE DIRECTIVES - LIST B The DOE Directives listed below contain requirements relevant to the scope of work under this contract. In most cases, the requirements applicable to the Contractor are contained in the Contractor Requirement Document attached to the DOE directive. These directives are applicable, in whole or in part, in accordance with Section I Clause entitled "DEAR 970.5204-2 LAWS,

  19. Covalent Attachment of Diamondoid Phosphonic Acid Dichlorides to Tungsten

    Office of Scientific and Technical Information (OSTI)

    Oxide Surfaces (Journal Article) | SciTech Connect Covalent Attachment of Diamondoid Phosphonic Acid Dichlorides to Tungsten Oxide Surfaces Citation Details In-Document Search Title: Covalent Attachment of Diamondoid Phosphonic Acid Dichlorides to Tungsten Oxide Surfaces Authors: Li, Fei Hua ; Fabbri, Jason D. ; Yurchenko, Raisa I. ; Mileshkin, Alexander N. ; Hohman, J.Nathan ; Yan, Hao ; Yuan, Hongyuan ; Tran, Ich C. ; Willey, Trevor M. ; Bagge-Hansen, Michael ; Dahl, Jeremy E.P. ; Carlson,

  20. Pressurizer with a mechanically attached surge nozzle thermal sleeve

    DOE Patents [OSTI]

    Wepfer, Robert M

    2014-03-25

    A thermal sleeve is mechanically attached to the bore of a surge nozzle of a pressurizer for the primary circuit of a pressurized water reactor steam generating system. The thermal sleeve is attached with a series of keys and slots which maintain the thermal sleeve centered in the nozzle while permitting thermal growth and restricting flow between the sleeve and the interior wall of the nozzle.

  1. Nuclear Energy Institute (NEI) Attachment, Integrated Safety Analysis |

    Energy Savers [EERE]

    Department of Energy Energy Institute (NEI) Attachment, Integrated Safety Analysis Nuclear Energy Institute (NEI) Attachment, Integrated Safety Analysis This paper addresses why the use of an Integrated Safety Analysis ("ISA") is appropriate for fuel recycling facilities1 which would be licensed under new regulations currently being considered by NRC. The use of the ISA for fuel facilities under Part 70 is described and compared to the use of a Probabilistic Risk Assessment

  2. Microsoft Word - Attachment G1H.doc

    Office of Environmental Management (EM)

    APPENDIX H DESIGN DRAWINGS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT CARLSBAD, NEW MEXICO Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G1H Page G1H-i ATTACHMENT G1 APPENDIX H DESIGN DRAWINGS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT CARLSBAD, NEW MEXICO Drawing Title 762447-E1 Panel closure system, air intake and exhaust drifts, title sheet

  3. Microsoft Word - Attachment G2A.doc

    Office of Environmental Management (EM)

    A MATERIAL SPECIFICATION SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2A Page G2A-i ATTACHMENT G2 APPENDIX A MATERIAL SPECIFICATION SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Appendix A Abstract This appendix specifies material characteristics for shaft seal system components designed

  4. Microsoft Word - Attachment G2B.doc

    Office of Environmental Management (EM)

    B SHAFT SEALING CONSTRUCTION PROCEDURES SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2B Page G2B-i ATTACHMENT G2 APPENDIX B SHAFT SEALING CONSTRUCTION PROCEDURES SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Appendix B Abstract This appendix describes equipment and procedures used to

  5. Microsoft Word - Flash2008-08attachmentFAC22.doc | Department...

    Energy Savers [EERE]

    Flash2008-08attachmentFAC22.doc Microsoft Word - Flash2008-08attachmentFAC22.doc Microsoft Word - Flash2008-08attachmentFAC22.doc More Documents & Publications Policy Flash 2013-75...

  6. Attachment A: Modeling in Support of Additional Two-Unit Operating...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Docket No....

  7. Appendix DATA Attachment B: WIPP Waste Containers and Emplacement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment B: WIPP Waste Containers and Emplacement United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment B: WIPP Waste Containers and Emplacement Table of Contents DATA-B-1.0 Authorized Waste Emplacement Containers DATA-B-1.1 Container Descriptions DATA-B-1.2 Dunnage Containers DATA-B-1.3 Payload Descriptions DATA-B-1.4 Emplacement Configurations DATA-B-2.0 References List of Figures Figure DATA-B- 1. 55-gal Drum

  8. Interface structure for hub and mass attachment in flywheel rotors

    DOE Patents [OSTI]

    Deteresa, S.J.; Groves, S.E.

    1998-06-02

    An interface structure is described for hub and mass attachment in flywheel rotors. The interface structure efficiently transmits high radial compression forces and withstands both large circumferential elongation and local stresses generated by mass-loading and hub attachments. The interface structure is comprised of high-strength fiber, such as glass and carbon, woven into an angle pattern which is about 45{degree} with respect to the rotor axis. The woven fiber is bonded by a ductile matrix material which is compatible with and adheres to the rotor material. This woven fiber is able to elongate in the circumferential direction to match the rotor growth during spinning. 2 figs.

  9. Interface structure for hub and mass attachment in flywheel rotors

    DOE Patents [OSTI]

    Deteresa, Steven J. (Livermore, CA); Groves, Scott E. (Brentwood, CA)

    1998-06-02

    An interface structure for hub and mass attachment in flywheel rotors. The interface structure efficiently transmits high radial compression forces and withstands both large circumferential elongation and local stresses generated by mass-loading and hub attachments. The interface structure is comprised of high-strength fiber, such as glass and carbon, woven into an angle pattern which is about 45.degree. with respect to the rotor axis. The woven fiber is bonded by a ductile matrix material which is compatible with and adheres to the rotor material. This woven fiber is able to elongate in the circumferential direction to match the rotor growth during spinning.

  10. Biocompatible implants and methods of making and attaching the same

    DOE Patents [OSTI]

    Rowley, Adrian P; Laude, Lucien D; Humayun, Mark S; Weiland, James D; Lotfi, Atoosa; Markland, Jr., Francis S

    2014-10-07

    The invention provides a biocompatible silicone implant that can be securely affixed to living tissue through interaction with integral membrane proteins (integrins). A silicone article containing a laser-activated surface is utilized to make the implant. One example is an implantable prosthesis to treat blindness caused by outer retinal degenerative diseases. The device bypasses damaged photoreceptors and electrically stimulates the undamaged neurons of the retina. Electrical stimulation is achieved using a silicone microelectrode array (MEA). A safe, protein adhesive is used in attaching the MEA to the retinal surface and assist in alleviating focal pressure effects. Methods of making and attaching such implants are also provided.

  11. Impedance measurements for detecting pathogens attached to antibodies

    DOE Patents [OSTI]

    Miles, Robin R.; Venkateswaran, Kodumudi S.; Fuller, Christopher K.

    2004-12-28

    The use of impedance measurements to detect the presence of pathogens attached to antibody-coated beads. In a fluidic device antibodies are immobilized on a surface of a patterned interdigitated electrode. Pathogens in a sample fluid streaming past the electrode attach to the immobilized antibodies, which produces a change in impedance between two adjacent electrodes, which impedance change is measured and used to detect the presence of a pathogen. To amplify the signal, beads coated with antibodies are introduced and the beads would stick to the pathogen causing a greater change in impedance between the two adjacent electrodes.

  12. Method for detecting pathogens attached to specific antibodies

    DOE Patents [OSTI]

    Miles, Robin R.; Venkateswaran, Kodumudi S.; Fuller, Christopher K.

    2005-01-25

    The use of impedance measurements to detect the presence of pathogens attached to antibody-coated beads. In a fluidic device antibodies are immobilized on a surface of a patterned interdigitated electrode. Pathogens in a sample fluid streaming past the electrode attach to the immobilized antibodies, which produces a change in impedance between two adjacent electrodes, which impedance change is measured and used to detect the presence of a pathogen. To amplify the signal, beads coated with antibodies are introduced and the beads would stick to the pathogen causing a greater change in impedance between the two adjacent electrodes.

  13. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, Mark A. (102 Foxhunt Dr., North Augusta, SC 29841); Zollinger, W. Thor (3927 Almon Dr., Martinez, GA 30907)

    1992-01-01

    An apparatus for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the KELLY VACUUM SYSTEM but can be modified for use with any standard mobile robot and cleaning tool.

  14. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, M.A.; Zollinger, W.T.

    1992-09-22

    An apparatus is described for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the Kelly Vacuum System but can be modified for use with any standard mobile robot and cleaning tool. 14 figs.

  15. Reliability Testing the Die-Attach of CPV Cell Assemblies

    SciTech Connect (OSTI)

    Bosco, N.; Sweet, C.; Kurtz, S.

    2011-02-01

    Results and progress are reported for a course of work to establish an efficient reliability test for the die-attach of CPV cell assemblies. Test vehicle design consists of a ~1 cm2 multijunction cell attached to a substrate via several processes. A thermal cycling sequence is developed in a test-to-failure protocol. Methods of detecting a failed or failing joint are prerequisite for this work; therefore both in-situ and non-destructive methods, including infrared imaging techniques, are being explored as a method to quickly detect non-ideal or failing bonds.

  16. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    L, Attachment E, Page 1 SECTION L ATTACHMENT E PAST PERFORMANCE INFORMATION FORM 1. Complete Name of Offeror or Team Member 2. Contract Title and Location 3. Customer Name, Current Address, Telephone Number and E-mail 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date the Work was Completed 8. Initial Contract Price /Estimated Cost and Fee 9. Final Amount Invoiced/Amount Invoiced to Date 10a. Technical Point of Contact (see instruction below) 10b.

  17. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, M.A.; Zollinger, W.T.

    1991-01-01

    This invention is comprised of an apparatus for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the KELLY VACUUM SYSTEM but can be modified for use with any standard mobile robot and cleaning tool.

  18. Part III - List of Documents, Exhibits, and Other Attachments

    National Nuclear Security Administration (NNSA)

    Updated 9/30/15 to Mod 0588 Contract No. DE-AC04-94AL85000 Modification No. M202 Section J - Page 1 Part III - List of Documents, Exhibits, and Other Attachments Section J LIST OF ATTACHMENTS Document Appendix A - Personnel Appendix (Revised RAs 1-12 and Mods M0541, M0558) Appendix B - Statement of Work (Revised M244, M264) Appendix C - Special Bank Account Agreement (Revised M248, M271, M461, M497, M508) Appendix D - Key Personnel (Revised M216, M224, M227, M229, M233, M252, M257, M272, M275,

  19. Methods and materials for nanocrystalline surface coatings and attachment of peptide amphiphile nanofibers thereon

    DOE Patents [OSTI]

    Stupp, Samuel I. (Chicago, IL); Spoerke, Erik D. (Albuquerque, NM); Anthony, Shawn G. (New Stanton, PA); Niece; Krista L. (Evanston, IL)

    2008-06-24

    Biocompatible composites comprising peptide amphiphiles and surface modified substrates and related methods for attachment thereon.

  20. Microsoft Word - AL2000-05Attachment.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment.doc Microsoft Word - AL2000-05Attachment.doc PDF icon Microsoft Word - AL2000-05Attachment.doc More Documents & Publications al99-06attachment.doc� EXHIBIT A: CRADA, WFO, PUA and NPUA Comparison Table, with suggested changes Microsoft Word - NSRC precompetitive User Agreement amended 1-18-07.doc

  1. Attached-sunspace designs: a nationwide economic appraisal

    SciTech Connect (OSTI)

    Roach, F.; Kirschner, C.

    1980-01-01

    Performance estimates for attached-sunspace passive solar heated residences have recently been incorporated into the Los Alamos/UNM EASE III model. These estimates are used to analyze the economic performance of a fixed dimension sunspace design when attached to a pre-existing single family residential unit. The sunspace is a passive design which can be easily and effectively adapted to a retrofit situation. Several key parameters are carefully evaluated for the sunspace retrofit design. These include loan or mortgage terms, ownership period, resale potential and competing conventional fuel prices. General economic and design parameters are combined in a variant of life cycle costing to evaluate the feasibility of both owner-built and contractor-built attached sunspaces for 220 regions in the contiguous United States. This evaluation is made for two conventional fuel types - natural gas and electric resistance - and for three resale values - 0%, 100%, and 200%. Results show that the prospect for conventional fuel displacement through retrofit of attached sunspaces is very good with the design's economic performance enhanced in regions with expensive conventional fuel alternatives.

  2. River Corridor Closure Contract Section J, Attachment J-8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Contract No. DE-AC06-05RL14655 A000 1 ATTACHMENT J-8 EMPLOYEE BENEFITS AND PENSION PLANS Pursuant to application employee benefit and pension requirements in Contract Section H, Special Contract Requirement, the Contractor shall annually submit the Report of Contractor Expenditures for Employee Supplemental Compensation

  3. New methods of nozzle attachment to FRP spray headers

    SciTech Connect (OSTI)

    Boucher, E.J.

    1995-06-01

    The traditional method of attaching spray nozzles to FRP spray headers in the absorber tower of a wet limestone system has been through the use of 150 lb. Flanges. This paper will illustrate two additional methods (grooved adapters & adhesive bonded nozzles) and will demonstrate the cost saving associated versus the flanged option, as well as the advantages and disadvantages of each system.

  4. http://southernhillshospital.com/

    National Nuclear Security Administration (NNSA)

    Hospital * Copyright ehc.com; All rights reserved. Terms of Use * Privacy Notice * Social Media Policy * Newsroom * Site Map * Page 6 of 6 A full service hospital serving...

  5. http://brc.gov/

    National Nuclear Security Administration (NNSA)

    Transportation Storage Subcommittee Commission Charter Commissioned Papers Federal Register Notices BRC Staff "What We Heard" Report BRC@nuclear.energy.gov The Blue Ribbon ...

  6. http://www

    Broader source: Energy.gov (indexed) [DOE]

    Proposed Energy Transport Corridors

  7. Shunt attachment and method for interfacing current collection systems

    DOE Patents [OSTI]

    Denney, P.E.; Iyer, N.C.; Hannan, W.F. III.

    1992-12-08

    A composite brush to shunt attachment wherein a volatile component of a composite but mostly metallic brush, used for current collection purposes, does not upon welding or brazing, adversely affect the formation of the interfacial bond with a conductive shunt which carries the current from the zone of the brush. The brush to shunt attachment for a brush material of copper-graphite composite and a shunt of copper, or substituting silver for copper as an alternative, is made through a hot isostatic pressing (HIP). The HIP process includes applying high pressure and temperature simultaneously at the brush to shunt interface, after it has been isolated or canned in a metal casing in which the air adjacent to the interface has been evacuated and the interfacial area has been sealed before the application of pressure and temperature. 6 figs.

  8. Turbine blade and non-integral platform with pin attachment

    DOE Patents [OSTI]

    Campbell, Christian X; Eng, Darryl; Marra, John J

    2015-01-27

    Platforms (36, 38) span between turbine blades (23, 24, 25) on a disk (32). Each platform may be individually mounted to the disk by a pin attachment (42). Each platform (36) may have a rotationally rearward edge portion (50) that underlies a forward portion (45) of the adjacent platform (38). This limits centrifugal bending of the rearward portion of the platform, and provides coolant sealing. The rotationally forward edge (44A, 44B) of the platform overlies a seal element (51) on the pressure side (28) of the forwardly adjacent blade, and does not underlie a shelf on that blade. The pin attachment allows radial mounting of each platform onto the disk via tilting (60) of the platform during mounting to provide mounting clearance for the rotationally rearward edge portion (50). This facilitates quick platform replacement without blade removal.

  9. Shunt attachment and method for interfacing current collection systems

    DOE Patents [OSTI]

    Denney, Paul E. (State College, PA); Iyer, Natraj C. (Columbia, SC); Hannan, III, William F. (Monroeville Boro, PA)

    1992-01-01

    A composite brush to shunt attachment wherein a volatile component of a composite but mostly metallic brush, used for current collection purposes, does not upon welding or brazing, adversely affect the formation of the interfacial bond with a conductive shunt which carries the current from the zone of the brush. The brush to shunt attachment for a brush material of copper-graphite composite and a shunt of copper, or substituting silver for copper as an alternative, is made through a hot isostatic pressing (HIP). The HIP process includes applying high pressure and temperature simultaneously at the brush to shunt interface, after it has been isolated or canned in a metal casing in which the air adjacent to the interface has been evacuated and the interfacial area has been sealed before the application of pressure and temperature.

  10. River Corridor Closure Contract Section J, Attachment J-14

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Contract No. DE-AC06-08RL14655 A099 1 SECTION J, ATTACHMENT J-14 ACRONYM LIST The following acronyms are used in this Contract: AB Authorization Basis ACO Administrative Contracting Officer ACWP Actual Cost of Work Performed ADR Alternative Dispute Resolution ARRA American Recovery and Reinvestment Act B&R Budgeting and Reporting BCWP Budgeted Cost of Work Performed BCWS Budgeted Cost of Work Scheduled BHI Bechtel Hanford, Inc. BMS Business Management System BRC Budget and Reporting

  11. Nevada Test Site Environmental Report Attachment A: Site Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nevada Test Site Environmental Report Attachment A: Site Description DOE/NV/25946--790-ATT A Nevada Test Site Environmental Report 2008 Disclaimer Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. Available for sale to the public from: U.S. Department of Commerce National

  12. Pin and roller attachment system for ceramic blades

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    In a turbine, a plurality of blades are attached to a turbine wheel by way of a plurality of joints which form a rolling contact between the blades and the turbine wheel. Each joint includes a pin and a pair of rollers to provide rolling contact between the pin and an adjacent pair of blades. Because of this rolling contact, high stress scuffing between the blades and the turbine wheel reduced, thereby inhibiting catastrophic failure of the blade joints.

  13. Attachment H: Delegation of Authority Memorandum | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    H: Delegation of Authority Memorandum Attachment H: Delegation of Authority Memorandum United States Department of Energy Memorandum DATE: August 14, 1994 REPLY TO ATTN OF: EM-16 SUBJECT: Delegation of Authority TO: Manager, DOE Operations Offices Manager, Fernald Field Office Manager, Rocky Flats Office Manager, Golden Office On April 21, 1994, a memorandum delegating certain authorities related to financial assistance agreements was sent to you. I am expanding the original delegation to

  14. Expert Meeting Report: Cladding Attachment Over Exterior Insulation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cladding Attachment Over Exterior Insulation P. Baker Building Science Corporation October 2013 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, subcontractors, or affiliated partners makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus,

  15. Pin and roller attachment system for ceramic blades

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-07-25

    In a turbine, a plurality of blades are attached to a turbine wheel by way of a plurality of joints which form a rolling contact between the blades and the turbine wheel. Each joint includes a pin and a pair of rollers to provide rolling contact between the pin and an adjacent pair of blades. Because of this rolling contact, high stress scuffing between the blades and the turbine wheel reduced, thereby inhibiting catastrophic failure of the blade joints. 3 figs.

  16. Microsoft Word - Attachment B - Reporting Requirements.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DE-SOL-0003339 J.1 ATTACHMENT B - REPORTING REQUIREMENTS REPORTING REQUIREMENTS CHECKLIST 1. AWARDEE: 2. IDENTIFICATION NUMBER: REPORT SUBMISSION: Reports shall be submitted to the electronic addresses indicated in the NETL-identified distribution list provided in the post award debriefing. Electronic copies of each report must be submitted to the Contract Specialist (CS) and Contracting Officer's Representative (COR). 4. PLANNING AND REPORTING REQUIREMENTS FORM NO. FREQ. NO. OF COPIES FORM NO.

  17. PART III … LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    National Nuclear Security Administration (NNSA)

    Page 130 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J LIST OF APPENDICES - TABLE OF CONTENTS Appendix A Statement of Work Appendix B Award Fee Plan Appendix C Transition Plan Appendix D Sensitive Foreign Nations Control Appendix E Performance Guarantee Agreement(s) Appendix F List of Applicable Directives Appendix G Personnel Appendix Appendix H Key Personnel Appendix I Small Business Subcontracting Plan Appendix J Diversity Plan Guidance Appendix K Program Management

  18. SECTION L … ATTACHMENT A - PERFORMANCE GUARANTEE AGREEMENT

    National Nuclear Security Administration (NNSA)

    A, Page 1 SECTION L ATTACHMENT A PERFORMANCE GUARANTEE AGREEMENT For value received, and in consideration of, and in order to induce the United States (the Government) to enter into Contract [insert Contract number] for the management and operation of the Nevada National Security Site (the "Contract") dated _______________, by and between the Government and _______________ (Contractor), the undersigned, ____________________ _______________ (Guarantor), a corporation incorporated in the

  19. DE-SOL-0008449 Attachment L-7c

    National Nuclear Security Administration (NNSA)

    DE-SOL-0008449 Attachment L-7c [Type here] VIETNAM MOBILIZATION PLAN DE-SOL-0008449 1.0 INTRODUCTION Based on the information presented below, the Statement of Work requirements relating to in- country deployments, and the Work Breakdown Structure (WBS) provided in Table 1, the Offeror shall develop a mobilization plan that describes its approach to a comprehensive Nuclear Smuggling Detection and Deterrence (NSDD) deployment involving Port of Cat Lai seaport in Vietnam. 2.0 REQUIREMENTS The

  20. Microsoft Word - Attachment 1 DICCE2 Statement of Work

    National Nuclear Security Administration (NNSA)

    Attachment 1 DE-SOL-0008449 1. OBJECTIVE The objective of this procurement is to install integrated sustainable radiation detection equipment at selected international land border crossings, airports, feeder ports and seaports in cooperation with international partners around the world in order to strengthen the overall capability of partner countries to deter, detect, and interdict illicit trafficking in special nuclear and other radiological materials. The focus is on the integration

  1. Attached is Policy Flash 2013-34 Department of Energy Acquisition...

    Broader source: Energy.gov (indexed) [DOE]

    Attached is Policy Flash 2013-34 Department of Energy Acquisition Letter 2013-04 on Executive Compensation The information attached to this policy flash may be superseded at a...

  2. Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business...

    Office of Environmental Management (EM)

    43 DOE F 4220.2 Small Business Review Form Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business Review Form Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business...

  3. PolFlash10-31_attach1.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    PolFlash10-31attach1.pdf More Documents & Publications PolFlash10-31.pdf PolFlash10-31attach2.pdf Initial Application for FAC-C, Purchasing, Financial Assistance and Property...

  4. Microsoft Word - ARRAGuideAttachment10v1.doc | Department of Energy

    Office of Environmental Management (EM)

    ARRAGuideAttachment10v1.doc Microsoft Word - ARRAGuideAttachment10v1.doc More Documents & Publications Microsoft Word - ARRAAttachment12v1.doc Microsoft Word - DRAFT CRB Interview Guidance

  5. EECBG 10-07C/SEP 10-006B Attachment 1: Process Metrics List |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 10-07C/SEP 10-006B Attachment 1: Process Metrics List EECBG 10-07C/SEP 10-006B Attachment 1: Process Metrics List PDF icon eecbg_sep_reporting_guidance_attachment_06242011.pdf More Documents & Publications EECBG SEP Attachment 1 - Process metric list EECBG Program Notice 10-07A DOE Recovery Act Reporting Requirements for the State Energy Program

  6. Attachment A: Modeling in Support of Additional Two-Unit Operating

    Energy Savers [EERE]

    Configurations | Department of Energy Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Docket No. EO-05-01: Attachment to the Operating Plan of Mirant Potomac River, LLC PDF icon Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations More Documents & Publications Mirant Potomac, Alexandria, Virginia: Maximum Impacts Predicted by AERMOD-PRIME Mirant

  7. Post-Installation Report Outline (IDIQ Attachment J-9) | Department of

    Energy Savers [EERE]

    Energy Post-Installation Report Outline (IDIQ Attachment J-9) Post-Installation Report Outline (IDIQ Attachment J-9) Document offers a post-installation report outline sample for an energy savings performance contract. Microsoft Office document icon mv_post_report.doc More Documents & Publications Measurement and Verification Plan and Savings Calculations Methods Outline (IDIQ Attachment J-8) Annual Report Outline (IDIQ Attachment J-10) ESPC Task Order Financial Schedules (IDIQ

  8. AttachmentFlash_2010-22(1).pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    22(1).pdf AttachmentFlash2010-22(1).pdf PDF icon AttachmentFlash2010-22(1).pdf More Documents & Publications Policy Flash 2016-10 fac2001-27.pdf AttachmentFlash2010-55.pdf...

  9. River Corridor Closure Contract Section J, Attachment J-11

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Contract No. DE-AC06-05RL14655 Modification 398 1 SECTION J, ATTACHMENT J-11 RCC FUNDING PROFILE In accordance with the Section B clause entitled Changes to Target Cost, Target Fee, and Schedule, the following is the projected funding profile for this Contract: Fiscal Year Annual Budget Authority ($1M)* Cumulative Budget Authority ($1M)* 2005** $ 107** $ 107 2006 183 290 2007 212 502 2008 232 734 2009 242 976 2010 297 1,273 2011 376 1,649 2012 302 1,951 2013 300 2,251 2014 280 2,531 2015 201

  10. River Corridor Closure Contract Section J, Attachment J-5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Contract No. DE-AC06-05RL14655 A000 1 SECTION J, ATTACHMENT J-5 SMALL DISADVANTAGED BUSINESS PARTICIPATION PROGRAM TARGETS (A) Washington Closure NAICS Code Description of NAICS Major Group SDB Dollars Percentage** Subtotal (B) Subcontractors NAICS Code Description of NAICS Major Group SDB Dollars Percentage** 238 Specialty Trade Contractors 37,352,000 1.92 423 Merchant Wholesalers, Durable Goods* 43,104,000 2.21 541 Professional, scientific, & tech srvcs* 13,931,000 0.72 562 Waste mgt

  11. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    E, Page 1 SECTION L ATTACHMENT E PAST PERFORMANCE INFORMATION FORM 1. Complete Name of Offeror or Team Member 2. Contract Title and Location 3. Customer Name, Current Address, Telephone Number and E-mail 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date the Work was Completed 8. Initial Contract Price /Estimated Cost and Fee 9. Final Amount Invoiced/Amount Invoiced to Date 10a. Technical Point of Contact (see instruction below) 10b. Contracting

  12. Attachment L-2a Relevant Corporate Experience Form

    National Nuclear Security Administration (NNSA)

    [Submit in Volume II, TAB 1] DE-SOL-0008449 Attachment L-2a Relevant Corporate Experience Form 1) Experience Submission Number: (Start with 1 and number consecutively) 2). Name and Address of Offeror or Team Member 3. Complete Name/Title of Contract and Location/Address of project/contract 3. Project Owner Name and Address 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date Work Ended 8. Initial Contract Price/Cost and Fee 9. Final Amount

  13. Nevada Test Site Environmental Report 2008 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy A. Wills

    2009-09-01

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2008 (National Security Technologies, LLC [NSTec], 2009a). Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  14. Nevada Test Site Environmental Report 2009, Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills, ed.

    2010-09-13

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2009. Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  15. Cladding Attachment Over Thick Exterior Insulating Sheathing (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-11-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of wood-framed walls and mass masonry wall assemblies. The location of the insulation on the exterior of the structure has many direct benefits, including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased airtightness and improved water management. For thick layers of exterior insulation (more than 1.5 in.), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location. Although the approach has proven effective, there is significant resistance to its widespread implementation due to a lack of research and understanding of the mechanisms involved in the development of the vertical displacement resistance capacity. In addition, the long-term in-service performance of the system has been questioned due to potential creep effects of the assembly under the sustained dead load of the cladding and effects of varying environmental conditions. In addition, the current International Building Code (IBC) and International Residential Code (IRC) do not have a provision that specifically allows this assembly.

  16. Predicting Envelope Leakage in Attached Dwellings (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-11-01

    The most common method of measuring air leakage is to perform single (or solo) blower door pressurization and/or depressurization test. In detached housing, the single blower door test measures leakage to the outside. In attached housing, however, this "solo" test method measures both air leakage to the outside and air leakage between adjacent units through common surfaces. Although minimizing leakage to neighboring units is highly recommended to avoid indoor air quality issues between units, reduce pressure differentials between units, and control stack effect, the energy benefits of air sealing can be significantly overpredicted if the solo air leakage number is used in the energy analysis. Guarded blower door testing is more appropriate for isolating and measuring leakage to the outside in attached housing. This method uses multiple blower doors to depressurize adjacent spaces to the same level as the unit being tested. Maintaining a neutral pressure across common walls, ceilings, and floors acts as a "guard" against air leakage between units. The resulting measured air leakage in the test unit is only air leakage to the outside. Although preferred for assessing energy impacts, the challenges of performing guarded testing can be daunting.

  17. DE-EM-0001971 WIPP M&O J-22 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    22 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT E: PERFORMANCE GUARANTEE AGREEMENT (Performance Guarantee Agreements dated, August 17, 2012 is hereby incorporated

  18. Occupational Medical Services at Hanford PART III -LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Occupational Medical Services at Hanford PART III -LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J LIST OF ATTACHMENTS Attachment Description J-1 List of Applicable Federal Laws & Regulations - List A J-2 List of Applicable DOE Directives - List B J-3 Hanford Site Services and Infrastructure Requirements Matrix J-4 List of Acronyms J-5 Service Contract Act Wage Determination J-6 Government-Furnished Property (GFP) Inventory J-7 Government-Furnished Information Technology

  19. Attachment 2: Solicitation for Offers with New and Revised Green Lease Text

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text PDF icon Solicitation for Offers Paragraphs with New and Revised Green Lease Text More Documents & Publications Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 4: Unrevised SFO Paragraphs Reissued Green Lease Policies and Procedures for Lease Acquisition

  20. DOE/RL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATTACHMENTS February 28, 2012 Rev 1 Page 31 ATTACHMENT 2 Lifting Requirements for Concrete Blocks DOE/RL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS February 28, 2012 Rev 1 Page 32 This page intentionally left blank. DOE/RL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS May 2, 2013 Rev 1 Page 33 Lifting Requirements for Concrete Blocks Concrete Blocks (i.e., Ecology, Landscaping Blocks) stacked more than two high shall be evaluated for structural stability. Lifting

  1. Attachment A: AIP Program Principles (Questions and Answers 1-12)

    Broader source: Energy.gov [DOE]

    This attachment contains twelve questions and answers that designate the mandatory AIP provisions that shall be included in new and renegotiated agreements and discusses the principles underlying...

  2. Attachment 5 Volume II Pricing Matrix.xls | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Attachment 5 Volume II Pricing Matrix.xls&0; More Documents & Publications Microsoft Word - FY07AnnualReport.doc CX-005455: Categorical Exclusion Determination Microsoft Word -...

  3. T-534: Vulnerability in the PDF distiller of the BlackBerry Attachment...

    Broader source: Energy.gov (indexed) [DOE]

    PROBLEM: Vulnerability in the PDF distiller of the BlackBerry Attachment Service for the BlackBerry Enterprise Server. PLATFORM: * BlackBerry Enterprise Server Express version...

  4. Microsoft PowerPoint - Window_Attachments-Webinar-Oct_28_2015...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Katherine Cort, Project Lead, Pacific Northwest National Laboratory * Katherine "Katie" Cort is an economist with PNNL and team lead of Building America's Window Attachments ...

  5. DE-EM-0001971 WIPP M&O J-i PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    i PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J LIST OF ATTACHMENTS Table of Content ATTACHMENT A: LAWS, REGULATIONS, AND DIRECTIVES (DEC 2000) ............ 1 ATTACHMENT B: SMALL, SMALL DISADVANTAGED, AND WOMEN-OWNED SMALL BUSINESS SUBCONTRACTING PLAN ......................... 7 ATTACHMENT C: DRAFT PERFORMANCE EVALUATION AND MEASUREMENT PLAN (PEMP) .............................................................................. 8 ATTACHMENT D: SPECIAL FINANCIAL INSTITUTION

  6. Nevada Test Site Environmental Report 2007 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills

    2008-09-01

    This appendix expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2007 (U.S. Department of Energy [DOE], 2008). Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  7. Attachment method for stacked integrated circuit (IC) chips

    DOE Patents [OSTI]

    Bernhardt, A.F.; Malba, V.

    1999-08-03

    An attachment method for stacked integrated circuit (IC) chips is disclosed. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM. 12 figs.

  8. Attachment method for stacked integrated circuit (IC) chips

    DOE Patents [OSTI]

    Bernhardt, Anthony F. (Berkeley, CA); Malba, Vincent (Livermore, CA)

    1999-01-01

    An attachment method for stacked integrated circuit (IC) chips. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM.

  9. Expert Meeting Report: Cladding Attachment Over Exterior Insulation (BSC Report)

    SciTech Connect (OSTI)

    2013-10-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. The location of the insulation to the exterior of the structure has many direct benefits including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased air tightness and improved water management (Hutcheon 1964, Lstiburek 2007). The intent of the meeting was to review the current state of industry knowledge regarding cladding attachment over exterior insulation with a specific focus on: 1. Gravity load resistance, 2. Wind load resistance. The presentations explore these topics from an engineering design, laboratory testing, field monitoring, as well as practical construction perspective. By bringing various groups together (who have been conduction research or have experience in this area), a more holistic review of the design limits and current code language proposals can be completed and additional gaps identified. The results of which will help inform design standards and criteria.

  10. Attaching solar collectors to a structural framework utilizing a flexible clip

    DOE Patents [OSTI]

    Kruse, John S

    2014-03-25

    Methods and apparatuses described herein provide for the attachment of solar collectors to a structural framework in a solar array assembly. A flexible clip is attached to either end of each solar collector and utilized to attach the solar collector to the structural framework. The solar collectors are positioned to allow a member of the framework to engage a pair of flexible clips attached to adjacent solar collectors during assembly of the solar array. Each flexible clip may have multiple frame-engaging portions, each with a flange on one end to cause the flexible clip to deflect inward when engaged by the framework member during assembly and to guide each of the frame-engaging portions into contact with a surface of the framework member for attachment.

  11. Methods for attaching polymerizable ceragenins to water treatment membranes using silane linkages

    DOE Patents [OSTI]

    Hibbs, Michael; Altman, Susan J.; Jones, Howland D. T.; Savage, Paul B.

    2013-09-10

    This invention relates to methods for chemically grafting and attaching ceragenin molecules to polymer substrates; methods for synthesizing ceragenin-containing copolymers; methods for making ceragenin-modified water treatment membranes and spacers; and methods of treating contaminated water using ceragenin-modified treatment membranes and spacers. Ceragenins are synthetically produced antimicrobial peptide mimics that display broad-spectrum bactericidal activity. Alkene-functionalized ceragenins (e.g., acrylamide-functionalized ceragenins) can be attached to polyamide reverse osmosis membranes using amine-linking, amide-linking, UV-grafting, or silane-coating methods. In addition, silane-functionalized ceragenins can be directly attached to polymer surfaces that have free hydroxyls.

  12. Methods for attaching polymerizable ceragenins to water treatment membranes using amine and amide linkages

    DOE Patents [OSTI]

    Hibbs, Michael; Altman, Susan J.; Jones, Howland D.T.; Savage, Paul B.

    2013-10-15

    This invention relates to methods for chemically grafting and attaching ceragenin molecules to polymer substrates; methods for synthesizing ceragenin-containing copolymers; methods for making ceragenin-modified water treatment membranes and spacers; and methods of treating contaminated water using ceragenin-modified treatment membranes and spacers. Ceragenins are synthetically produced antimicrobial peptide mimics that display broad-spectrum bactericidal activity. Alkene-functionalized ceragenins (e.g., acrylamide-functionalized ceragenins) can be attached to polyamide reverse osmosis membranes using amine-linking, amide-linking, UV-grafting, or silane-coating methods. In addition, silane-functionalized ceragenins can be directly attached to polymer surfaces that have free hydroxyls.

  13. Microsoft Word - 15-WTP-0151.LKH.MemotoSmith.Attachment2R.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 15-WTP-0151 1 Attachment 2 15-WTP-0151 2 Attachment 2 15-WTP-0151 3 Attachment 2 15-WTP-0151 4 ES-i EXECUTIVE SUMMARY The U.S. Department of Energy, Office of River Protection completed a review of the Low-Activity Waste (LAW) Facility at the Hanford Waste Treatment and Immobilization Plant (WTP). The review was conducted to provide the U.S. Department of Energy with increased confidence in the design and operability of key LAW Facility mechanical and process systems. The review was intended

  14. Microsoft Word - MOD M229 FAR-DEAR Attach 1 - FINAL

    National Nuclear Security Administration (NNSA)

    Modification No. M229 Contract No. DE-AC54-00AL66620 Page No. 2 of 2 The purpose of this Modification is to incorporate the following: A. Replace Part III, LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS, Section J - LIST OF ATTACHMENTS, Appendix A - PERSONNEL APPENDIX in its entirety to update REIMBURSEMENT AUTHORIZATIONS, TABLE OF CONTENTS, and to replace Section II. BENEFITS PROGRAM, B.4.e.(6), B.4.f.(4), and B.4.j.(1)(a)&(b) (See Attachment 1). B. Replace Part III - LIST OF DOCUMENTS,

  15. Remedial action plan and site design for stabilization of the inactive uranium processing site at Naturita, Colorado. Appendix B of Attachment 3: Groundwater hydrology report, Attachment 4: Water resources protection strategy, Final

    SciTech Connect (OSTI)

    Not Available

    1994-03-01

    Attachment 3 Groundwater Hydrology Report describes the hydrogeology, water quality, and water resources at the processing site and Dry Flats disposal site. The Hydrological Services calculations contained in Appendix A of Attachment 3, are presented in a separate report. Attachment 4 Water Resources Protection Strategy describes how the remedial action will be in compliance with the proposed EPA groundwater standards.

  16. Attached is Policy Flash 2013-34 Department of Energy Acquisition Letter 2013-04 on Executive Compensation

    Broader source: Energy.gov [DOE]

    Attached is Policy Flash 2013-34 Department of Energy Acquisition Letter 2013-04 on Executive Compensation

  17. DE-EM-0001971 WIPP M&O J-15 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    15 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT D: SPECIAL FINANCIAL INSTITUTION ACCOUNT AGREEMENT FOR USE WITH THE PAYMENTS CLEARED FINANCING ARRANGEMENT DE-EM-0001971 WIPP M&O J-16 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT D SPECIAL FINANCIAL INSTITUTION ACCOUNT AGREEMENT FOR USE WITH THE PAYMENTS CLEARED FINANCING ARRANGEMENT Agreement entered into this, _______ day of ___________, ________, between the UNITED

  18. DE-SOL-0002555 WIPP Solicitation J-23 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT F: GUIDANCE FOR PREPARATION OF DIVERSITY PLAN DE-SOL-0002555 WIPP Solicitation J-24 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT F GUIDANCE FOR PREPARATION OF DIVERSITY PLAN (See Contract Clause entitled "Diversity Plan") This Guidance is to assist the Contractor in understanding the information being sought by the Department for each of the Diversity elements and

  19. Attachment A: Site Description Nevada National Security Site Environmental Report 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment A: Site Description Nevada National Security Site Environmental Report 2014 ATT-A-i Table of Contents List of Figures ....................................................................................................................................................... A-ii List of Tables ......................................................................................................................................................... A-ii Acronyms and Abbreviations

  20. Request for Proposal No. DE-SOL-0008418 SECTION L ATTACHMENT...

    National Nuclear Security Administration (NNSA)

    SECTION L ATTACHMENT H LETTER OF COMMITMENT I, INSERT NAME, hereby certify that the resume submitted with this letter is true and correct. I agree to accept the position of ...

  1. The Ductility of Human Jaw Bone Attached to a Tooth | Stanford...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Ductility of Human Jaw Bone Attached to a Tooth Saturday, May 31, 2014 In a bone-tooth fibrous joint, the articulation between harder materials such as the cementum of the...

  2. File:Energy Data Jam - Attachment C.pdf | Open Energy Information

    Open Energy Info (EERE)

    Involved Help Apps Datasets Community Login | Sign Up Search File Edit History File:Energy Data Jam - Attachment C.pdf Jump to: navigation, search File File history File usage...

  3. PolFlash10-30_attach2.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    PolFlash10-30attach2.pdf More Documents & Publications FinancialAssistanceCertification-01.pdf PolFlash10-31.pdf PolFlash10-30.pdf...

  4. Attachment L-7a U.S. DEPARTMENT OF ENERGY NATIONAL NUCLEAR SECURITY...

    National Nuclear Security Administration (NNSA)

    ... 2 of 6 U.S. DEPARTMENT OF ENERGY NATIONAL NUCLEAR SECURITY ADMINISTRATION 2 attachment. ... other U.S. Page 3 of 6 U.S. DEPARTMENT OF ENERGY NATIONAL NUCLEAR SECURITY ADMINISTRATION ...

  5. Mechanisms of Oriented Attachment of TiO2 Nanocrystals in Vacuum and Humid

    Office of Scientific and Technical Information (OSTI)

    Environments: Reactive Molecular Dynamics (Journal Article) | SciTech Connect Mechanisms of Oriented Attachment of TiO2 Nanocrystals in Vacuum and Humid Environments: Reactive Molecular Dynamics Citation Details In-Document Search Title: Mechanisms of Oriented Attachment of TiO2 Nanocrystals in Vacuum and Humid Environments: Reactive Molecular Dynamics Authors: Raju, Muralikrishna [1] ; Van Duin, Adri C. T. [2] ; Fichthorn, Kristen [1] + Show Author Affiliations Pennsylvania State

  6. Acquisition Guide Chapter 1.2 - Attachment - Non-Delegable HCA Functions

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Responsibilities | Department of Energy Acquisition Guide Chapter 1.2 - Attachment - Non-Delegable HCA Functions and Responsibilities Acquisition Guide Chapter 1.2 - Attachment - Non-Delegable HCA Functions and Responsibilities A non-delegable authority is one that cannot be transferred by the HCA to another. Typically, the types of authority that cannot be delegated are those which are deemed of such importance or sensitivity that the personal attention, expertise, or involvement of the

  7. Vacuum Attachment for Collection of Lithium Powder ---- Inventor(s) Hans

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schneider and Stephan Jurczynski | Princeton Plasma Physics Lab Vacuum Attachment for Collection of Lithium Powder ---- Inventor(s) Hans Schneider and Stephan Jurczynski The Vacuum Attachment is part of an integrated system designed to collect Lithium (Li) Power for storage in mineral oil or to passivate it in Vinegar or Chilled Water. Major components are: Mister, Li Trap, Oil Trap or Combustion Chamber and Ash rated Shop Vacuum. The Mister provides a fine coating of mineral oil, vinegar or

  8. Microsoft Word - Attachment G1G 10-1-2012.docx

    Office of Environmental Management (EM)

    G1 APPENDIX G TECHNICAL SPECIFICATIONS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT CARLSBAD, NEW MEXICO Waste Isolation Pilot Plant Hazardous Waste Permit October 1, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 1, 2012 PERMIT ATTACHMENT G1G Page G1G-i ATTACHMENT G1 APPENDIX G TECHNICAL SPECIFICATIONS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT CARLSBAD, NEW MEXICO TABLE OF CONTENTS DIVISION 1 - GENERAL REQUIREMENTS

  9. ESPC Task Order Financial Schedules (IDIQ Attachment J-6) | Department of

    Office of Environmental Management (EM)

    Energy Task Order Financial Schedules (IDIQ Attachment J-6) ESPC Task Order Financial Schedules (IDIQ Attachment J-6) Document features worksheets federal agencies can use to determine guaranteed cost savings and contractor payments, energy conservation measure costs and savings, and more in an for an energy savings performance contract (ESPC). Microsoft Office document icon 5_3_to_schedules.doc More Documents & Publications ESPC ENABLE Final Proposal Requirements ESPC ENABLE Draft Task

  10. http://cait.wri.org/

    National Nuclear Security Administration (NNSA)

    CAIT Home [ Login ] CAIT Home Register | Login CAIT Products CAIT CAIT-UNFCCC CAIT-U.S. CAIT-V&A (About CAIT) Feedback & Discussion Forum Charts & Figures FAQ Acknowledge- ments Resources & Links Welcome! The Climate Analysis Indicators Tool (CAIT) is an information and analysis tool on global climate change developed by the World Resources Institute. CAIT provides a comprehensive and comparable database of greenhouse gas emissions data (including all major sources and sinks) and

  11. http://www.census.gov/

    National Nuclear Security Administration (NNSA)

    People & Households American Community Survey * Estimates * Projections Income | State Median Income * Poverty * Health Insurance International * Genealogy * Census 2000 * More ...

  12. On the Effect of Ramp Rate in Damage Accumulation of the CPV Die-Attach: Preprint

    SciTech Connect (OSTI)

    Bosco, N. S.; Silverman, T. J.; Kurtz, S. R.

    2012-06-01

    It is commonly understood that thermal cycling at high temperature ramp rates may activate unrepresentative failure mechanisms. Increasing the temperature ramp rate of thermal cycling, however, could dramatically reduce the test time required to achieve an equivalent amount of thermal fatigue damage, thereby reducing overall test time. Therefore, the effect of temperature ramp rate on physical damage in the CPV die-attach is investigated. Finite Element Model (FEM) simulations of thermal fatigue and thermal cycling experiments are made to determine if the amount of damage calculated results in a corresponding amount of physical damage measured to the die-attach for a variety of fast temperature ramp rates. Preliminary experimental results are in good agreement with simulations and reinforce the potential of increasing temperature ramp rates. Characterization of the microstructure and resulting fatigue crack in the die-attach suggest a similar failure mechanism across all ramp rates tested.

  13. Dissociative attachment of electrons to vibronically excited SO{sub 2}

    SciTech Connect (OSTI)

    Kumar, S.V.K.; Ashoka, V.S.; Krishnakumar, E.

    2004-11-01

    Dissociative electron attachment (DEA) to vibronically excited SO{sub 2} in the Clements' band in the 288 to 298 nm region has been studied. The O{sup -} ion yield, to a first approximation, follows the photo absorption spectrum in this range indicating the DEA process to be independent of the vibrational levels in this band. This is in contrast to what is generally observed for vibrational level dependence from the electronic ground state. The current measurements also do not show any qualitative change in the dissociative attachment process due to change of symmetry as one moves from the peaks to the valleys of the Clements band.

  14. Simulation and Experiment of Thermal Fatigue in the CPV Die Attach: Preprint

    SciTech Connect (OSTI)

    Bosco, N.; Silverman, T.; Kurtz, S.

    2012-05-01

    FEM simulation and accelerated thermal cycling have been performed for the CPV die attach. Trends in fatigue damage accumulation and equivalent test time are explored and found to be most sensitive to temperature ramp rate. Die attach crack growth is measured through cycling and found to be in excellent agreement with simulations of the inelastic strain energy accumulated. Simulations of an entire year of weather data provides for the relative ranking of fatigue damage between four cites as well as their equivalent accelerated test time.

  15. DE-EM-0001971 WIPP M&O J-8 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT C: DRAFT PERFORMANCE EVALUATION AND MEASUREMENT PLAN (PEMP) DE-EM-0001971 WIPP M&O J-9 Draft PERFORMANCE EVALUATION AND MEASUREMENT PLAN (PEMP) OCTOBER 1 (2012) through SEPTEMBER 30, (2013) Contract No. DE- EM0001971 SECTION J ATTACHMENT C I. INTRODUCTION This Performance Evaluation and Measurement Plan (PEMP) provides a standard process for development, administration, and coordination of all phases of the

  16. Ceramic to metal attachment system. [Ceramic electrode to metal conductor in MHD generator

    DOE Patents [OSTI]

    Marchant, D.D.

    1983-06-10

    A composition and method are described for attaching a ceramic electrode to a metal conductor. A layer of randomly interlocked metal fibers saturated with polyimide resin is sandwiched between the ceramic electrode and the metal conductor. The polyimide resin is then polymerized providing bonding.

  17. Microsoft Word - WAP-WPN-02-6-Attachment-A.docx

    Office of Environmental Management (EM)

    ATTACHMENT A OTHER F EDERAL G OVERNMENT R EGULATIONS PERTAINING T O L EAD---BASED P AINT The p urpose o f t his s ection i s t o p rovide a h elpful r eference i ndicating w hat W...

  18. Dissociative Electron Attachment to Carbon Dioxide via the 8.2 eV Feshbach resonance

    SciTech Connect (OSTI)

    Slaughter, Dan; Adaniya, Hidihito; Rescigno, Tom; Haxton, Dan; Orel, Ann; McCurdy, Bill; Belkacem, Ali

    2011-08-17

    Momentum imaging experiments on dissociative electron attachment (DEA) to CO{sub 2} are combined with the results of ab initio calculations to provide a detailed and consistent picture of the dissociation dynamics through the 8.2 eV resonance, which is the major channel for DEA in CO{sub 2}. The present study resolves several puzzling misconceptions about this system.

  19. Protective interior wall and attaching means for a fusion reactor vacuum vessel

    DOE Patents [OSTI]

    Phelps, R.D.; Upham, G.A.; Anderson, P.M.

    1985-03-01

    The wall basically consists of an array of small rectangular plates attached to the existing walls with threaded fasteners. The protective wall effectively conceals and protects all mounting hardware beneath the plate array, while providing a substantial surface area that will absorb plasma energy.

  20. Attachment N

    Office of Environmental Management (EM)

    SCHEDULE Los Alamos National Laboratory Hazardous Waste Permit June 2012 2 Compliance Schedule This Compliance Schedule briefly lists particular requirements, in chronological...

  1. Attachment K

    Office of Environmental Management (EM)

    ...P-5 Drilling Mud Pit(s) NFA granted 10232008 SWMU 001m P-6 Mud Pit NFA granted 10232008 SWMU 001n P-15 Mud Pit NFA granted 10232008 SWMU 001o Badger Unit Drilling Mud ...

  2. ATTACHMENT L

    Office of Environmental Management (EM)

    H POST-CLOSURE CARE PLANS (Reserved)

  3. ATTACHMENT L

    Office of Environmental Management (EM)

    O LONG-TERM MONITORING AND MAINTENANCE PLANS (Reserved)

  4. Attachment M

    Office of Environmental Management (EM)

    M (reserved)

  5. ATTACHMENT G

    Office of Environmental Management (EM)

    and Waste Management Samples," DOEEM- 0089T, Rev. 2. Prepared for the U.S. Department of Energy by Pacific Northwest Laboratory, Richland, Washington. EPA, 1986 and all approved...

  6. Attachment L

    Office of Environmental Management (EM)

    L WIPP GROUNDWATER DETECTION MONITORING PROGRAM PLAN Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant ...

  7. Attachment A

    Office of Environmental Management (EM)

    TECHNICAL AREA (TA) - UNIT DESCRIPTIONS 1 Los Alamos National Laboratory Hazardous Waste ... Pad 29 A.5.7 TA-55-185 30 A.5.8 Mixed Waste Storage Tank System 30 A.5.9 Mixed Waste ...

  8. Attachment B

    Office of Environmental Management (EM)

    B HAZARDOUS WASTE PERMIT APPLICATION PART A Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous ...

  9. Attachment E

    Office of Environmental Management (EM)

    E INSPECTION SCHEDULE, PROCESS AND FORMS Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste ...

  10. ATTACHMENT D

    Office of Environmental Management (EM)

    CONTINGENCY PLAN Los Alamos National Laboratory Hazardous Waste Permit December 2014 TABLE ... 5 D.1 HAZARDOUS AND MIXED WASTE EMERGENCY RESPONSE RESOURCES ...... 5 ...

  11. Attachment 4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 of 6 High-Level Bases and Assumptions for the WTP Project Baseline 1. The process design is adequate to perform the intended function. 2. DOE will meet all of its responsibilities set forth in the ICD's. 3. DOE will be able to provide timely financial authorization in accordance with the contract, to achieve the project schedule. 4. DOE site activities will have no disruptive impact on project activities. 5. DOE will provide water and power at quantities required by the project at no cost to

  12. Attachment J

    Office of Environmental Management (EM)

    UNITS Los Alamos National Laboratory Hazardous Waste Permit December 2014 TABLE J-1 Active Portion of the Facility Includes units permitted to store and treat hazardous waste,...

  13. ATTACHMENT E

    Office of Environmental Management (EM)

    ensure adequate capacity. Structures must also be inspected for the presence of standing water or hazardousmixed waste or any other indication of a spill (i.e. discolored...

  14. ATTACHMENT N

    Office of Environmental Management (EM)

    ALAMOS CO. L O S A L A M O S C O . 0 0.5 1 2 mi 0 1 3 km 2 0 10,000 ft NM CO UT AZ TX OK U.S.A. Figure 1 Regional Location Map of Los Alamos National Laboratory PUEBLO Of SAN...

  15. Attachment A

    Office of Environmental Management (EM)

    activities where contact with TRU 8 mixed waste does not occur, are characterized, placed in containers, and stored (for periods not 9 exceeding the limits specified in...

  16. Attachment O

    Office of Environmental Management (EM)

    O WIPP MINE VENTILATION RATE MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit May 8, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous...

  17. Attachment Q

    Office of Environmental Management (EM)

    L LISTING OF OFF-SITE FACILITIES Los Alamos National Laboratory Hazardous Waste Permit November 2010 2 TABLE L List of Off-Site Waste Management Facilities that May Return...

  18. Attachment I

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7130 W. Grandridge Blvd., Ste. A Phone: 509.735. 1000 T R ID E C Kennewick, WA 99336-7 72"5 Fax: 509.735.6609 TRI-(:ITY l)E'IEL()PMNENT ('0LNCIL1 www.TRIDEC.org 1 -800-TRI-CITY ...

  19. Attachment N

    Office of Environmental Management (EM)

    and Recovery Act RPD relative percent difference SOP standard operating procedure TIC tentatively identified compound TRU Transuranic VOC volatile organic compound WIPP...

  20. ATTACHMENT F

    Office of Environmental Management (EM)

    Waste Permit December 2014 Specialized training shall be given to personnel assigned special functions or specific emergency duties. For example, emergency response personnel are...

  1. DE-EM-0001971 WIPP M&O J-7 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT B: SMALL, SMALL DISADVANTAGED, AND WOMEN-OWNED SMALL BUSINESS SUBCONTRACTING PLAN (The Subcontracting Plan dated, August 17, 2011 which was approved on March 27, 2012, is hereby incorporated

  2. Mission Support Contract Attachment J.10 Contract No. DE-AC06-09RL14728 Modification 464

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment J.10 Contract No. DE-AC06-09RL14728 Modification 464 Table Of Contents J.10-1 SERVICE CONTRACT ACT: WAGE DETERMINATION ...................................................................... 2 J.10-2 DAVIS BACON ACT: GENERAL DECISION ..................................................................................... 23 J.10-3 COLLECTIVE BARGAINING ACT: WAGE DETERMINATION .................................. 30 Mission Support Contract Attachment J.10 Contract No. DE-AC06-09RL14728

  3. Microsoft Word - PTC_vs_ITC_report_031209.doc

    Office of Scientific and Technical Information (OSTI)

    NREL/TP-6A2-45359 National Renewable Energy Laboratory PTC, ITC, or Cash Grant? An Analysis of the Choice Facing Renewable Power Projects in the United States Mark Bolinger and Ryan Wiser Lawrence Berkeley National Laboratory Karlynn Cory and Ted James National Renewable Energy Laboratory Environmental Energy Technologies Division March 2009 Download from http://eetd.lbl.gov/ea/emp The work described in this report was funded by the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.

  4. Global Impacts (Carbon Cycle 2.0)

    ScienceCinema (OSTI)

    Gadgil, Ashok [EETD and UC Berkeley

    2011-06-08

    Ashok Gadgil, Faculty Senior Scientist and Acting Director, EETD, also Professor of Environmental Engineering, UC Berkeley, speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 2, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

  5. Clip gage attachment for frictionless measurement of displacement during high-temperature mechanical testing

    DOE Patents [OSTI]

    Alexander, David J. (Oak Ridge, TN)

    1994-01-01

    An attachment for placement between a test specimen and a remote clip gage extensometer providing improved fracture toughness tests of materials at elevated temperature. Using a cylindrical tube and axial rod in new relationship, the device transfers the displacement signal of the fracture toughness test specimen directly to a clip gage extensometer located outside the high temperature furnace. Virtually frictionless operation is assured by having the test specimen center one end of the rod in one end of the tube, while the clip gage extensometer arms center the other end of the rod in the other end of the tube. By providing positive control over both ends of both rod and tube, the attachment may be operated in orientations other than vertical.

  6. Clip gage attachment for frictionless measurement of displacement during high-temperature mechanical testing

    DOE Patents [OSTI]

    Alexander, D.J.

    1994-01-04

    An attachment for placement between a test specimen and a remote clip gage extensometer providing improved fracture toughness tests of materials at elevated temperature is described. Using a cylindrical tube and axial rod in new relationship, the device transfers the displacement signal of the fracture toughness test specimen directly to a clip gage extensometer located outside the high temperature furnace. Virtually frictionless operation is assured by having the test specimen center one end of the rod in one end of the tube, while the clip gage extensometer arms center the other end of the rod in the other end of the tube. By providing positive control over both ends of both rod and tube, the attachment may be operated in orientations other than vertical. 1 figure.

  7. Observation of the dynamics leading to a conical intersection in dissociative electron attachment to water

    SciTech Connect (OSTI)

    Haxton, Dan; Adaniya, Hidihito; Slaughter, Dan; Rudek, B.; Osipov, Timur; Weber, Thorsten; Rescigno, Tom; McCurdy, Bill; Belkacem, Ali

    2011-06-08

    Following prior work on the lower-energy resonances, we apply techniques of momentum imaging and ab initio scattering calculations to the process of dissociative electron attachment to water via the highest-energy {sup 2}B{sub 2} resonance. We focus on the H{sup -} anion fragment, which is produced via dynamics passing through and avoiding the conical intersection with the lower A{sub 1} state, leading to OH ((sup 2}{Pi}#5;) and OH ({sup 2}{Sigma}#6;), respectively. The momentum imaging technique, when combined with theoretical calculations on the attachment amplitude and dissociation dynamics, demonstrates that the angular distributions provide a signature of the location of the conical intersection in the space of nuclear con#12;gurations.

  8. The Ductility of Human Jaw Bone Attached to a Tooth | Stanford Synchrotron

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiation Lightsource The Ductility of Human Jaw Bone Attached to a Tooth Saturday, May 31, 2014 In a bone-tooth fibrous joint, the articulation between harder materials such as the cementum of the tooth root and alveolar bone (human jaw bone) of the socket is permitted by an intervening softer periodontal ligament. To investigate adaptations of the bony socket, basic principles from tribology, mechanics of materials, and materials science were used to postulate that the ductile nature of an

  9. ATTACHMENT FLOODPLAIN STATEMENT OF FINDINGS FOR DEPARTMENT OF ENERGY LOAN GUARANTEE TO SEMPRA GENERATION

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ATTACHMENT FLOODPLAIN STATEMENT OF FINDINGS FOR DEPARTMENT OF ENERGY LOAN GUARANTEE TO SEMPRA GENERATION FOR THE MESQUITE SOLAR ENERGY FACILITY NEAR GILLESPIE, ARIZONA The U.S. Department of Energy (DOE) has conducted an environmental assessment (EA) that analyzed the reasonably foreseeable environmental impacts associated with the nominal 400 megawatt (MW) photovoltaic solar power project and associated interconnection transmission line proposed by Sempra Generation (Sempra) for the Mesquite

  10. Contract No. DE-AC06-97RL13184, Modification 158 Attachment J-1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AC06-97RL13184, Modification 158 Attachment J-1 Page 1 of 9 WD 05-2569 (Rev.-14) was first posted on www.wdol.gov on 06/19/2012 ************************************************************************************ REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION By direction of the Secretary of Labor | WAGE AND HOUR DIVISION | WASHINGTON D.C. 20210 | | | | Wage Determination No.: 2005-2569 Diane C. Koplewski Division

  11. Microsoft Word - Attachment J-7 - Current to Mod 009 with Track Changes removed.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , Modification 009 Occupational Medical Services at Hanford J-7-1 Attachment J-7 -- Government-Furnished IT Systems List Title Type Breadth Of Usage No. Of Users Web Based 851 Notification OHM to replace CDS Single User 1 AMH All Records Request Application CDS Single Workgroup 2 CCSI Injury Claims Application CDS Single Workgroup 2 Client Tracking Application CDS Single User 1 Data Card Application CDS Single Workgroup 9 Data Card Creator Application CDS Single Workgroup 10 AMH DOE Records

  12. Microsoft Word - Attach_A_Site Description 2007_Final.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment A: Site Description DOE/NV/25946--543-ATT-A Vision * Service * Partnership National Security Technologies LLC Schooner Crater September 2008 Disclaimer Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. Available for sale to the public from: U.S. Department of Commerce

  13. Microsoft Word - Attachment J-1 Covered Site Contractors and Sub-Contractors (Mod 003).doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-1-1 ATTACHMENT J.1 COVERED SITE CONTRACTORS/SUB-CONTRACTORS Current Covered Prime Contractors and their Covered Sub-Contractors: HPM Corporation (HPMC) (10/1/2012 - present) HPMC Covered Subs: Computer Science Corp (CSC) Advanced Technologies & Laboratories International, Inc. (ATL) (5/16/2005- present) No subcontractors Battelle Memorial Institute/Pacific Northwest National Laboratory (PNNL) No subcontractors CH2M Hill Plateau Remediation Company (CHPRC) (10/01/2008 - present) No

  14. Microsoft Word - Attachment J-1 Covered Site Contractors and Sub-Contractors.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-1-1 ATTACHMENT J.1 COVERED SITE CONTRACTORS/SUB-CONTRACTORS Covered Prime Contractors And Their Covered Sub-Contractors: HPM Corporation (HPMC) (10/1/2012 - present) HPMC Covered Subs: Computer Science Corp (CSC) Advanced Technologies and Laboratories International, Inc. (ATL) (5/16/2005- present) No subcontractors Battelle Memorial Institute/Pacific Northwest National Laboratory (PNNL) No subcontractors CH2M Hill Plateau Remediation Company (CHPRC) (10/01/2008 - present) No subcontractors

  15. Microsoft Word - Attachment J-2 Hardware and Software System Requirements.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-2-1 ATTACHMENT J.2 HARDWARE AND SOFTWARE SYSTEM REQUIREMENTS a. The Contractor shall provide a DOD 5015.x compliant individual electronic file system for each open claim in addition to the paper file system. All claim files must be part of a single, orderly central computerized file storage system which includes the software and hardware. This system shall be used to receive, record, locate and sort all assigned claims and related data. Should the Contractor change the data base management

  16. Microsoft Word - FEORP Attachments 1, 3, 4 & 5 - Cert. page + short narratives

    National Nuclear Security Administration (NNSA)

    US Department of Energy National Nuclear Security Administration FY 2015 Annual Federal Equal Opportunity Recruitment Program (FEORP) Plan October 2015 NNSA Office of Civil Rights, NA-1.2 NNSA FY 2015 FEORP Report FY 2015 Accomplishments Attachment 2 Instructions: Identify and outline the objectives and goals that were set in each area, based on the three Goal Areas, as reflected in the FEORP Plan for FY 2015. Outline the agency's final FY 2015 outcome, using the previously-established

  17. SECTION L … ATTACHMENT xx … KEY PERSONNEL AND CRITICAL WORK AREA PERSONNEL RESUME ELEMENTS

    National Nuclear Security Administration (NNSA)

    2] Attachment L-3a KEY PERSONNEL RESUME ELEMENTS 1. Name of Offeror: 2. Name of Key Person: 3. Proposed Position: 4. Duties and Responsibilities in Proposed Position including elements of SOW assigned: 5. Chronological Work History: Start with current position and work backwards. A. Name and Address of Firm: B. Position(s) Held: C. Dates of Employment: D. General Summary of Responsibilities: Provide a concise description of major duties and responsibilities for each job relevant to the proposed

  18. Dissociative electron attachments to ethanol and acetaldehyde: A combined experimental and simulation study

    SciTech Connect (OSTI)

    Wang, Xu-Dong; Xuan, Chuan-Jin; Feng, Wen-Ling; Tian, Shan Xi

    2015-02-14

    Dissociation dynamics of the temporary negative ions of ethanol and acetaldehyde formed by the low-energy electron attachments is investigated by using the anion velocity map imaging technique and ab initio molecular dynamics simulations. The momentum images of the dominant fragments O{sup ?}/OH{sup ?} and CH{sub 3}{sup ?} are recorded, indicating the low kinetic energies of O{sup ?}/OH{sup ?} for ethanol while the low and high kinetic energy distributions of O{sup ?} ions for acetaldehyde. The CH{sub 3}{sup ?} image for acetaldehyde also shows the low kinetic energy. With help of the dynamics simulations, the fragmentation processes are qualitatively clarified. A new cascade dissociation pathway to produce the slow O{sup ?} ion via the dehydrogenated intermediate, CH{sub 3}CHO{sup ?} (acetaldehyde anion), is proposed for the dissociative electron attachment to ethanol. After the electron attachment to acetaldehyde molecule, the slow CH{sub 3}{sup ?} is produced quickly in the two-body dissociation with the internal energy redistributions in different aspects before bond cleavages.

  19. Structures for attaching or sealing a space between components having different coefficients or rates of thermal expansion

    DOE Patents [OSTI]

    Corman, Gregory Scot; Dean, Anthony John; Tognarelli, Leonardo; Pecchioli, Mario

    2005-06-28

    A structure for attaching together or sealing a space between a first component and a second component that have different rates or amounts of dimensional change upon being exposed to temperatures other than ambient temperature. The structure comprises a first attachment structure associated with the first component that slidably engages a second attachment structure associated with the second component, thereby allowing for an independent floating movement of the second component relative to the first component. The structure can comprise split rings, laminar rings, or multiple split rings.

  20. DOE TRANSCOM Technical Support Services DE-EM0002903 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J LIST OF ATTACHMENTS Attachment Description Number of Pages J-1 LIST OF APPLICABLE DOE DIRECTIVES 1 J-2 LIST OF DELIVERABLES 4 J-3 PROJECT MANAGER MINIMUM LABOR QUALIFCATION 1 J-4 GOVERNMENT FURNISHED PROPERTY AND INFORMATION LIST 7 J-5 TRANSCOM PROGRAM DOCUMENTS 1 J-6 ACRONYM LIST 2 J-7 CONFERENCE ATTENDANCE APPROVAL REQUEST 2 J-8 SERVICE CONTRACT ACT WAGE DETERMINATION 10 J-9 DOE OFFICE OF ENVIRONMENTAL MANAGEMENT FY 13

  1. T-534: Vulnerability in the PDF distiller of the BlackBerry Attachment Service for the BlackBerry Enterprise Server

    Broader source: Energy.gov [DOE]

    BlackBerry advisory describes a security issue that the BlackBerry Attachment Service component of the BlackBerry Enterprise Server is susceptible to. The issue relates to a known vulnerability in the PDF distiller component of the BlackBerry Attachment Service that affects how the BlackBerry Attachment Service processes PDF files.

  2. DE-EM-0001971 WIPP M&O J-2 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT A LAWS, REGULATIONS, AND DIRECTIVES (DEC 2000) (a) In performing work under this contract, the Contractor shall comply with the requirements of applicable Federal, State, and local laws and regulations (including DOE regulations), unless relief has been granted in writing by the appropriate regulatory agency. (b) In performing work under this contract, the Contractor shall comply with the requirements of those

  3. DE-SOL-0002555 WIPP Solicitation J-26 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT G: SUMMARY OF CONTRACT DELIVERABLES DE-SOL-0002555 WIPP Solicitation J-27 SUMMARY OF CONTRACT DELIVERABLES Deliverable Reference Deliverable DOE Action Deliverable Due Date 1 1. C.3.1.5 Ten Year Site Plan Approval Within 6 months of written notice to proceed, updated annually 2. C.3.1.5 Maintenance Plan (including Nuclear Maintenance Management Plan) Approval Within 6 months of written notice to proceed, updated

  4. DE-SOL-0002555 WIPP Solicitation J-34 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT I: FY2011 ANNUAL PERFORMANCE AGREEMENT WITH THE ASSISTANT SECRETARY Office of Environmental Management Performance Agreement with the Assistant Secretary Overview The Office of Environmental Management (EM) is working to complete the safe cleanup of the environmental legacy brought about from five decades of nuclear weapons development and government-sponsored nuclear energy research. For FY 2011, EM's

  5. Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business Review Form |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business Review Form Questions concerning this policy flash should be directed to Nickolas A. Demer, Office of Small and Disadvantaged Business Utilization (OSDBU) at 202-586-1614 or at Nickolas.Demer@hq.doe.gov. PDF icon Policy Flash DOE F 4220 2_FY13.pdf PDF icon 41922 DOE Form 4220.pdf More Documents & Publications DOE F 4220.2 Idaho Operations AMWTP Fact Sheet CERTIFIED REALTY SPECIALIST

  6. Fiber-optic strain gauge with attached ends and unattached microbend section

    DOE Patents [OSTI]

    Weiss, J.D.

    1992-07-21

    A strain gauge is made of an optical fiber into which quasi-sinusoidal microbends have been permanently introduced. The permanent microbends cause a reduction in the fiber's optical transmission, but, when the gauge is attached to a substrate that is subsequently strained, the amplitude of the deformations will diminish and the optical transmission through the fiber will increase. An apparatus and process for manufacturing these microbends into the optical fiber through a heat-set process is employed; this apparatus and process includes a testing and calibration system. 5 figs.

  7. Fiber-optic strain gauge with attached ends and unattached microbend section

    DOE Patents [OSTI]

    Weiss, Jonathan D. (Albuquerque, NM)

    1992-01-01

    A strain gauge is made of an optical fiber into which quasi-sinusoidal microbends have been permanently introduced. The permanent microbends cause a reduction in the fiber's optical transmission, but, when the gauge is attached to a substrate that is subsequently strained, the amplitude of the deformations will diminish and the optical transmission through the fiber will increase. An apparatus and process for manufacturing these microbends into the optical fiber through a heat-set process is employed; this apparatus and process includes a testing and calibration system.

  8. System and method for changing a glove attached to a glove box

    DOE Patents [OSTI]

    Aluisi, Alan (Aruada, CO)

    2001-01-01

    A system for changing the gloves of a glove box. The system requires the use of a new glove and a glove change ring to form a temporary secondary barrier to the exchange of atmospheres between the inner glove box and the room in which the glove box is operated. The system describes specific means for disengaging a used glove from the glove box port. The means for disengaging the used glove include use of a glove change hook and use of a glove with an attached tab for use in removal. A method for changing the gloves of a glove box is also described.

  9. Attachment I: Approval of Agreement-in-Principal with the State of Alaska |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy I: Approval of Agreement-in-Principal with the State of Alaska Attachment I: Approval of Agreement-in-Principal with the State of Alaska US Department of Energy Memorandum DATE: January 31, 1995 REPLY TO ATTN OF: EM-22 (C. Smoot, 202/586-2352) SUBJECT: Approval of Agreement-in-Principle with the State of Alaska TO: Manager, Nevada Operations Office Thank you for providing the draft Agreement-in-Principle with the State of Alaska for review and approval. I approve the

  10. Contract No. DE-AC06-97RL13184, Modification 158 Attachment J-4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6-97RL13184, Modification 158 Attachment J-4 Page 1 of 10 General Decision Number: WA130002 01/04/2013 WA2 Superseded General Decision Number: WA20120002 State: Washington Construction Types: Building, Heavy and Highway Counties: Benton and Franklin Counties in Washington. (D.O.E. HANFORD SITE ONLY) BENTON AND FRANKLIN COUNTIES (D.O.E. HANFORD SITE ONLY) BUILDING (does not include residential construction consisting of single family homes and apartments up to and including 4 stories), HEAVY and

  11. Microsoft Word - Attachment J-6 List of Applicable DOE Directives and COntractor Requirements Documents.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-6-1 ATTACHMENT J.6 LIST OF APPLICABLE DOE DIRECTIVES AND CONTRACTOR REQUIREMENTS DOCUMENTS (LIST B) The following is a list of applicable DOE Directives and Orders appended to this Contract as prescribed in Section I, Clause I.3. This list is not all inclusive. Document Number Title CRD O 150.1 Continuity Programs CRD O 205.1b, Chg.3 DOE Cyber Program CRD O 206.1 DOE Privacy Program CRD O 243.1B, Admin. Chg 1. Records Management Program CRD O 414.1D, Admin Chg 1. Quality Assurance CRD O

  12. Microsoft Word - Attachment J-4 Legal Management Plan (Mod 003).docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-4-1 ATTACHMENT J.4 LEGAL MANAGEMENT PLAN 1. Retention of Counsel: Contractor has determined that the following legal matters may necessitate handling by retained counsel: a. Any matter appealed to the Board of Industrial Insurance Appeals (BIIA) or any higher level court by the Claimant; b. Any matter which Contractor/DOE determines should be appealed to BIIA or any higher level court; c. Any matter involving complex or novel issues, which may require the expertise of an attorney, even if the

  13. Request for Proposal No. DE-SOL-0008418 SECTION L ATTACHMENT H

    National Nuclear Security Administration (NNSA)

    SECTION L ATTACHMENT H LETTER OF COMMITMENT I, [INSERT NAME], hereby certify that the resume submitted with this letter is true and correct. I agree to accept the position of [INSERT KEY PERSONNEL POSITION] with [NAME OF OFFEROR] if [NAME OF OFFEROR] is the entity selected to perform the scope of work set forth in solicitation DE-SOL-008418. My proposed total annual compensation ("compensation" is defined in 41 § U.S.C. 1127(a)(3)) as the [INSERT KEY PERSONNEL POSITION] for [NAME OF

  14. SECTION L … ATTACHMENT C - INSTRUCTIONS FOR SMALL BUSINESS SUBCONTRACTING PLAN

    National Nuclear Security Administration (NNSA)

    C, Page 1 SECTION L ATTACHMENT C INSTRUCTIONS FOR SMALL BUSINESS SUBCONTRACTING PLAN FAR 19.708(b) prescribes the use of Section I clause FAR 52.219-9, Small Business Subcontracting Plan. The following is a suggested model for use when formulating such a plan. While this model has been designed to be consistent with FAR 52.219-9, other formats of a subcontracting plan may be acceptable. However, failure to include the essential information as exemplified in this model may cause a delay in the

  15. Attachment L-7b Vietnam Design Requirements Document is an Official

    National Nuclear Security Administration (NNSA)

    b Vietnam Design Requirements Document is an Official Use Only document please see Section NNS-L-2000 for instructions to Obtain. Section NNS-L-2000 (a) (8) Official Use Only (OUO) Document. The Government considers the Vietnam Design Requirements Document, Attachment L-7b an OUO Document and it cannot be made available to the public via any public webpages (e.g. FebBizOpps, FedConnect, DICCE2 acquisition webpage, Reading Room). The Vietnam Design Requirements Document (DRD) may assist Offerors

  16. Nevada National Security Site Environmental Report 2011 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills, ed.

    2012-09-12

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2011. Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  17. The Effect of an Externally Attached Neutrally Buoyant Transmitter on Mortal Injury during Simulated Hydroturbine Passage

    SciTech Connect (OSTI)

    Brown, Richard S.; Pflugrath, Brett D.; Carlson, Thomas J.; Deng, Zhiqun

    2012-02-03

    On their seaward migration, juvenile salmonids commonly pass hydroelectric dams. Fish passing through hydroturbines experience a rapid decrease in pressure as they pass by the turbine blade and the severity of this decompression can be highly variable. This rapid decrease in pressure can result in injuries such as swim bladder rupture, exophthalmia, and emboli and hemorrhaging in the fins and tissues. However, recent research indicates that the presence of a telemetry tag (acoustic, radio, inductive) implanted inside the coelom of a juvenile salmon increases the likelihood that the fish will be injured or die during turbine passage. Thus, previous research conducted using telemetry tags implanted into the coelom of fish may have been inaccurate. Thus, a new technique is needed to provide unbiased estimates of survival through turbines. This research provides an evaluation of the effectiveness of a neutrally buoyant externally attached acoustic transmitter. Both nontagged fish and fish tagged with a neutrally buoyant external transmitter were exposed to a range of rapid decompressions simulating turbine passage. Juvenile Chinook salmon tagged with a neutrally buoyant externally attached acoustic transmitter did not receive a higher degree of barotrauma than their nontagged counterparts. We suggest that future research include field-based comparisons of survival and behavior among fish tagged with a neutrally buoyant external transmitter and those internally implanted with transmitters.

  18. Nevada National Security Site Environmental Report 2012 Attachment A: Site Description

    SciTech Connect (OSTI)

    Wills, Cathy A

    2013-09-11

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  19. Low-resistivity photon-transparent window attached to photo-sensitive silicon detector

    DOE Patents [OSTI]

    Holland, Stephen Edward (Hercules, CA)

    2000-02-15

    The invention comprises a combination of a low resistivity, or electrically conducting, silicon layer that is transparent to long or short wavelength photons and is attached to the backside of a photon-sensitive layer of silicon, such as a silicon wafer or chip. The window is applied to photon sensitive silicon devices such as photodiodes, charge-coupled devices, active pixel sensors, low-energy x-ray sensors and other radiation detectors. The silicon window is applied to the back side of a photosensitive silicon wafer or chip so that photons can illuminate the device from the backside without interference from the circuit printed on the frontside. A voltage sufficient to fully deplete the high-resistivity photosensitive silicon volume of charge carriers is applied between the low-resistivity back window and the front, patterned, side of the device. This allows photon-induced charge created at the backside to reach the front side of the device and to be processed by any circuitry attached to the front side. Using the inventive combination, the photon sensitive silicon layer does not need to be thinned beyond standard fabrication methods in order to achieve full charge-depletion in the silicon volume. In one embodiment, the inventive backside window is applied to high resistivity silicon to allow backside illumination while maintaining charge isolation in CCD pixels.

  20. Nevada National Security Site Environmental Report 2013 Attachment A: Site Description

    SciTech Connect (OSTI)

    Wills, C.

    2014-09-09

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  1. 3D Reconstruction of Biological Organization and Mineralization in Sediment Attached Biofilms During Uranium Bioremediation

    SciTech Connect (OSTI)

    Banfield, Jillian; Comolli, Luis R.; Singer, Steve

    2014-11-17

    Of central interest in this study were microbial communities attached to sediment particles and in associated groundwater. Are the communities similar? What do the organisms look like and how do they associated with each other? Research was conducted on samples collected from the Department of Energy's (DOE) Rifle Integrated Field Research Challenge (IFRC) site in Rifle, Colorado, USA. This site served first as a test case for in situ bioremediation via biostimulation, and more recently as a location for studying the role of microbial communities in the carbon and other linked biogeochemical cycles. We addressed the question of the nature of planktonic to sediment-attached microbial communities using field and laboratory experimental studies with a range of methods that provide 2- and 3-dimensional topological information coupled to information about chemical speciation, organism type, and activity levels. The research leveraged data from metagenomics and proteomics analyses that obtained through parallel work at the Rifle site in the context of the IFRC. In this project we integrated characterization methods with extensive genomic sequence information and associated environmental data to better understand the processes that occur within groundwater and sediment-attached communities. Notable is the range of characterization methods, including scanning transmission x-ray microscopy (STXM), micro-EXAFS/XANES and microdiffraction and 2D and 3D cryo-electron tomographic analysis, and high-resolutino transmission electron microscope (HRTEM) analysis to characterize these natural microbial communities. A cryo-TEM work was unique because samples for electron microscopic characterization were cryo-plunged directly on site immediately after sampling. This step minimizes post-collection alterations, including cell damages and change of redox state. Among many achievements documented in publications listed at the end of this report, we highlight the following: 1) The development of a platform for routine correlative cryogenic microscopy and spectroscopy with samples prepared on-site. 2) The determination of which organisms dominate planktonic and biofilm communities in the subsurface. 3) Identification of microorganism-mineral associations and discovery of a novel mechanism that sustains activity of iron-reducing bacteria. 4) The detection of bacteria from the OP11-OD1-WWE3 (etc.) radiation and elucidation of their remarkable structural organization by cryog-TEM cryo-electron tomograhpy (cryo-ET). 5) Extensive analysis of biofilms and documentation of the association of cells and Se minerals. 6) The comparison of expressed c-type cytochromes between pure cultures of G. bemidjiensis and related field populations, provided insight into possible molecular mechanisms for U(VI) reduction in the aquifer. At least sixteen publications will result from this project (partial support), which provide both graduate student and post doctoral training.

  2. No-migration variance petition. Appendix B, Attachments E--Q: Volume 4, Revision 1

    SciTech Connect (OSTI)

    Not Available

    1990-03-01

    Volume IV contains the following attachments: TRU mixed waste characterization database; hazardous constituents of Rocky flats transuranic waste; summary of waste components in TRU waste sampling program at INEL; total volatile organic compounds (VOC) analyses at Rocky Flats Plant; total metals analyses from Rocky Flats Plant; results of toxicity characteristic leaching procedure (TCLP) analyses; results of extraction procedure (EP) toxicity data analyses; summary of headspace gas analysis in Rocky Flats Plant (RFP) -- sampling program FY 1988; waste drum gas generation--sampling program at Rocky Flats Plant during FY 1988; TRU waste sampling program -- volume one; TRU waste sampling program -- volume two; and summary of headspace gas analyses in TRU waste sampling program; summary of volatile organic compounds (V0C) -- analyses in TRU waste sampling program.

  3. Nuclear reactor fuel assembly duct-tube-to-inlet-nozzle attachment system

    DOE Patents [OSTI]

    Christiansen, David W. (Kennewick, WA); Smith, Bob G. (Kennewick, WA)

    1982-01-01

    A reusable system for removably attaching the lower end 21 of a nuclear reactor fuel assembly duct tube to an upper end 11 of a nuclear reactor fuel assembly inlet nozzle. The duct tube's lower end 21 has sides terminating in locking tabs 22 which end in inwardly-extending flanges 23. The flanges 23 engage recesses 13 in the top section 12 of the inlet nozzle's upper end 11. A retaining collar 30 slides over the inlet nozzle's upper end 11 to restrain the flanges 23 in the recesses 13. A locking nut 40 has an inside threaded portion 41 which engages an outside threaded portion 15 of the inlet nozzle's upper end 11 to secure the retaining collar 30 against protrusions 24 on the duct tube's sides.

  4. Composite materials with metal oxide attached to lead chalcogenide nanocrystal quantum dots with linkers

    DOE Patents [OSTI]

    Fuke, Nobuhiro; Koposov, Alexey Y; Sykora, Milan; Hoch, Laura

    2014-12-16

    Composite materials useful for devices such as photoelectrochemical solar cells include a substrate, a metal oxide film on the substrate, nanocrystalline quantum dots (NQDs) of lead sulfide, lead selenide, and lead telluride, and linkers that attach the NQDs to the metal oxide film. Suitable linkers preserve the 1s absorption peak of the NQDs. A suitable linker has a general structure A-B-C where A is a chemical group adapted for binding to a MO.sub.x and C is a chemical group adapted for binding to a NQD and B is a divalent, rigid, or semi-rigid organic spacer moiety. Other linkers that preserve the 1s absorption peak may also be used.

  5. Plateau Remediation Contract Section J Contract No. DE-AC06-08RL14788 Attachment J.11, Revision 0

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CONTRACT LINE ITEM NUMBER (CLIN) ASSIGNMENT AGAINST CONTRACT STRUCTURE The table entitled, CONTRACT LINE ITEM NUMBER (CLIN) ASSIGNMENT AGAINST CONTRACT STRUCTURE, is included as a separate file. Plateau Remediation Contract Contract No. DE-AC06-08RL14788 ATTACHMENT J-11 CONTRACT LINE ITEM NUMBER (CLIN) ASSIGNMENT AGAINST CONTRACT STRUCTURE Section J Attachment J-11, Revision 2 PRC STATEMENT OF WORK SECTION ASSIGNED WBS ELEMENTS CLIN C.2.1 Transition 013.01 Project Management - PBS RL-13 1 C.2.1

  6. Attachment to Modification M067 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620

    National Nuclear Security Administration (NNSA)

    M067 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620 PX-SEC-J (6-24-04).doc J-App. E-1 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J - LIST OF ATTACHMENTS APPENDIX E - LIST OF APPLICABLE DIRECTIVES June 24, 2004 Pursuant to the contract clause entitled "Laws, Regulations, and DOE Directives," the following list of Directives is applicable to this contract. Environmental, Safety, and Health (ES&H) requirements for work conducted under this contract have

  7. Attachment to Modification M125 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620

    National Nuclear Security Administration (NNSA)

    M125 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620 PX-SEC-J (01/16/07) J-App. E-1 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J - LIST OF ATTACHMENTS APPENDIX E - LIST OF APPLICABLE DIRECTIVES January 16, 2007 Pursuant to the contract clause entitled "Laws, Regulations, and DOE Directives," the following list of directives is applicable to this contract. Environmental, Safety, and Health (ES&H) requirements for work conducted under this contract have

  8. Direct measurement of the characteristic three-body electron attachment time in the atmospheric air in direct current electric field

    SciTech Connect (OSTI)

    Shutov, A. V.; Smetanin, I. V.; Ionin, A. A.; Levchenko, A. O.; Seleznev, L. V.; Sinitsyn, D. V.; Ustinovskii, N. N.; Zvorykin, V. D.

    2013-07-15

    We report the results of theoretical and experimental study of the characteristic time for three-body attachment of electrons produced by 100 fs UV laser pulse in the atmosphere air in the external DC electric field ranged from 0.2 to 10 kV/cm.

  9. http://www.bea.gov/regional/rims/

    National Nuclear Security Administration (NNSA)

    About BEA National International Regional Industry Glossary FAQs About Regional * Methodologies * Articles * Release Schedule * Staff Contacts * Email Subscriptions Home > Regional Economic Accounts > Regional Input-Output Modeling System (RIMS II) Regional Input-Output Modeling System (RIMS II) Regional input-output multipliers such as the RIMS II multipliers attempt to estimate how much a one-time or sustained increase in economic activity in a particular region will be supplied by

  10. http://www.ornl.gov/Procurement.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    893 1. All Grade 5 and Grade 8 fasteners of foreign origin which do not bear any manufacturer's headmarks: Grade 5 Grade 8 2. Grade 5 fasteners with the following manufacturers'...

  11. http://www.springvalleyhospital.com/Home

    National Nuclear Security Administration (NNSA)

    Note: The information on this Web site is provided as general health guidelines and may ... for the content or any errors or omissions in the information provided by this Web site. ...

  12. http://nevadarecycles.gov/main/recyclables.htm

    National Nuclear Security Administration (NNSA)

    in Nevada National Recycling Web Resources Earth911.com provides a listing of recycling resources to help you find a way to reuse or recycle much of your solid waste items. ...

  13. http://www.cemp.dri.edu/cemp/

    National Nuclear Security Administration (NNSA)

    It is the intent of the CEMP to provide to the public accurate, near real-time monitoring data through this web site. However, it should be noted that these data are provisional ...

  14. Nevada National Security Site Environmental Report 2010, Attachment A: Site Description

    SciTech Connect (OSTI)

    C. Wills, ed.

    2011-09-13

    Introduction to the Nevada National Security Site Environmental Report 2010. Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  15. Cost comparison modeling between current solder sphere attachment technology and solder jetting technology

    SciTech Connect (OSTI)

    Davidson, R.N.

    1996-10-01

    By predicting the total life-cycle cost of owning and operating production equipment, it becomes possible for processors to make accurate and intelligent decisions regarding major capitol equipment investments as well as determining the most cost effective manufacturing processes and environments. Cost of Ownership (COO) is a decision making technique based on inputting the total costs of acquiring, operating and maintaining production equipment. All quantitative economic and production data can be modeled and processed using COO software programs such as the Cost of Ownership Luminator program TWO COOL{trademark}. This report investigated the Cost of Ownership differences between the current state-of-the-art solder ball attachment process and a prototype solder jetting process developed by Sandia National Laboratories. The prototype jetting process is a novel and unique approach to address the anticipated high rate ball grid array (BGA) production requirements currently forecasted for the next decade. The jetting process, which is both economically and environmentally attractive eliminates the solder sphere fabrication step, the solder flux application step as well as the furnace reflow and post cleaning operations.

  16. Method and apparatus for jetting, manufacturing and attaching uniform solder balls

    DOE Patents [OSTI]

    Yost, Frederick G. (Cedar Crest, NM); Frear, Darrel R. (Albuquerque, NM); Schmale, David T. (Albuquerque, NM)

    1999-01-01

    An apparatus and process for jetting molten solder in the form of balls directly onto all the metallized interconnects lands for a ball grid array package in one step with no solder paste required. Molten solder is jetted out of a grid of holes using a piston attached to a piezoelectric crystal. When voltage is applied to the crystal it expands forcing the piston to extrude a desired volume of solder through holes in the aperture plate. When the voltage is decreased the piston reverses motion creating an instability in the molten solder at the aperture plate surface and thereby forming spherical solder balls that fall onto a metallized substrate. The molten solder balls land on the substrate and form a metallurgical bond with the metallized lands. The size of the solder balls is determined by a combination of the size of the holes in the aperture plate, the duration of the piston pulse, and the displacement of the piston. The layout of the balls is dictated by the location of the hooks in the grid. Changes in ball size and layout can be easily accomplished by changing the grid plate. This invention also allows simple preparation of uniform balls for subsequent supply to BGA users.

  17. Method and apparatus for jetting, manufacturing and attaching uniform solder balls

    DOE Patents [OSTI]

    Yost, F.G.; Frear, D.R.; Schmale, D.T.

    1999-01-05

    An apparatus and process are disclosed for jetting molten solder in the form of balls directly onto all the metallized interconnects lands for a ball grid array package in one step with no solder paste required. Molten solder is jetted out of a grid of holes using a piston attached to a piezoelectric crystal. When voltage is applied to the crystal it expands forcing the piston to extrude a desired volume of solder through holes in the aperture plate. When the voltage is decreased the piston reverses motion creating an instability in the molten solder at the aperture plate surface and thereby forming spherical solder balls that fall onto a metallized substrate. The molten solder balls land on the substrate and form a metallurgical bond with the metallized lands. The size of the solder balls is determined by a combination of the size of the holes in the aperture plate, the duration of the piston pulse, and the displacement of the piston. The layout of the balls is dictated by the location of the hooks in the grid. Changes in ball size and layout can be easily accomplished by changing the grid plate. This invention also allows simple preparation of uniform balls for subsequent supply to BGA users. 7 figs.

  18. Trial Run of a Junction-Box Attachment Test for Use in Photovoltaic Module Qualification (Presentation)

    SciTech Connect (OSTI)

    Miller, D.; Deibert, S.; Wohlgemuth, J.

    2014-06-01

    Engineering robust adhesion of the junction-box (j-box) is a hurdle typically encountered by photovoltaic (PV) module manufacturers during product development and manufacturing process control. There are historical incidences of adverse effects (e.g., fires), caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp-heat', 'thermal-cycle', or 'creep' tests within the IEC qualification protocol is proposed to verify the basic robustness of the adhesion system. The details of the proposed test are described, in addition to a trial run of the test procedure. The described experiments examine 4 moisture-cured silicones, 4 foam tapes, and a hot-melt adhesive used in conjunction with glass, KPE, THV, and TPE substrates. For the purpose of validating the experiment, j-boxes were adhered to a substrate, loaded with a prescribed weight, and then subjected to aging. The replicate mock-modules were aged in an environmental chamber (at 85 deg C/85% relative humidity for 1000 hours; then 100 degrees C/<10% relative humidity for 200 hours) or fielded in Golden, Miami, and Phoenix for 1 year. Attachment strength tests, including pluck and shear test geometries, were also performed on smaller component specimens.

  19. EMP Attachment 3 DOE-SC PNNL Site Dose Assessment Guidance

    SciTech Connect (OSTI)

    Snyder, Sandra F.

    2011-12-21

    This Dose Assessment Guidance (DAG) describes methods to use to determine the Maximally-Exposed Individual (MEI) location and to estimate dose impact to that individual under the U.S. Department of Energy Office of Science (DOE-SC) Pacific Northwest National Laboratory (PNNL) Site Environmental Monitoring Plan (EMP). This guidance applies to public dose from radioactive material releases to the air from PNNL Site operations. This document is an attachment to the Pacific Northwest National Laboratory (PNNL) Environmental Monitoring Plan (EMP) and describes dose assessment guidance for radiological air emissions. The impact of radiological air emissions from the U.S. Department of Energy Office of Science (DOE-SC) PNNL Site is indicated by dose estimates to a maximally exposed member of the public, referred to as the maximally exposed individual (MEI). Reporting requirements associated with dose to members of the public from radiological air emissions are in 40 CFR Part 61.94, WAC 246-247-080, and DOE Order 458.1. The DOE Order and state standards for dose from radioactive air emissions are consistent with U.S. Environmental Protection Agency (EPA) dose standards in 40 CFR 61.92 (i.e., 10 mrem/yr to a MEI). Despite the fact that the current Contract Requirements Document (CRD) for the DOE-SC PNNL Site operations does not include the requirement to meet DOE CRD 458.1, paragraph 2.b, public dose limits, the DOE dose limits would be met when EPA limits are met.

  20. Nuclear reactor fuel assembly duct-tube-to-handling-socket attachment system

    DOE Patents [OSTI]

    Christiansen, David W.; Smith, Bob G.

    1982-01-01

    A reusable system for removably attaching the upper end 10of a nuclear reactor duct tube to the lower end 30 of a nuclear reactor fuel assembly handling socket. A transition ring 20, fixed to the duct tube's upper end 10, has an interior-threaded section 22 with a first locking hole segment 24. An adaptor ring 40, fixed to the handling socket's lower end 30 has an outside-threaded section 42 with a second locking hole segment 44. The inside 22 and outside 42 threaded sections match and can be joined so that the first 24 and second 44 locking hole segments can be aligned to form a locking hole. A locking ring 50, with a locking pin 52, slides over the adaptor ring 40 so that the locking pin 52 fits in the locking hole. A swage lock 60 or a cantilever finger lock 70 is formed from the locking cup collar 26 to fit in a matching groove 54 or 56 in the locking ring 50 to prevent the locking ring's locking pin 52 from backing out of the locking hole.

  1. Technology Solutions Case Study: Cladding Attachment Over Thick Exterior Insulating Sheathing

    SciTech Connect (OSTI)

    2013-11-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of wood-framed walls and mass masonry wall assemblies. Insulation on the exterior of the structure has many direct benefits, including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased airtightness and improved water management. Although the approach has proven effective, there is resistance to its widespread implementation due to a lack of research and understanding of the mechanisms involved in the development of the vertical displacement resistance capacity. In addition, the long-term in-service performance of the system has been questioned due to potential creep effects of the assembly under the sustained dead load of the cladding and effects of varying environmental conditions. In addition, the current International Building Code (IBC) and International Residential Code (IRC) do not have a provision that specifically allows this assembly. In this project, researchers from Building Science Corporation, a Building America team, investigated these issues to better understand the mechanics behind this method of cladding attachment

  2. Co-repressor activity of scaffold attachment factor B1 requires sumoylation

    SciTech Connect (OSTI)

    Garee, Jason P.; Meyer, Rene; Systems Biology of Signal Transduction, German Cancer Research Center , INF 280, 69120 Heidelberg ; Oesterreich, Steffi

    2011-05-20

    Highlights: {yields} SAFB1 is sumoylated to two lysine residues K231 and K294. {yields} SAFB1 sumoylation is regulated by PIAS1 and SENP1. {yields} Sumoylation of SAFB1 regulates its transcriptional repressor activity. {yields} Mutation of sumoylation sites leads to decreased SAFB1 binding to HDAC3. -- Abstract: Sumoylation is an emerging modification associated with a variety of cellular processes including the regulation of transcriptional activities of nuclear receptors and their coregulators. As SUMO modifications are often associated with transcriptional repression, we examined if sumoylation was involved in modulation of the transcriptional repressive activity of scaffold attachment factor B1. Here we show that SAFB1 is modified by both the SUMO1 and SUMO2/3 family of proteins, on lysine's K231 and K294. Further, we demonstrate that SAFB1 can interact with PIAS1, a SUMO E3 ligase which mediates SAFB1 sumoylation. Additionally, SENP1 was identified as the enzyme desumoylating SAFB1. Mutation of the SAFB1 sumoylation sites lead to a loss of transcriptional repression, at least in part due to decreased interaction with HDAC3, a known transcriptional repressor and SAFB1 binding partner. In summary, the transcriptional repressor SAFB1 is modified by both SUMO1 and SUMO2/3, and this modification is necessary for its full repressive activity.

  3. Reliability of emerging bonded interface materials for large-area attachments

    SciTech Connect (OSTI)

    Paret, Paul P.; DeVoto, Douglas J.; Narumanchi, Sreekant

    2015-12-30

    In this study, conventional thermal interface materials (TIMs), such as greases, gels, and phase change materials, pose bottlenecks to heat removal and have long caused reliability issues in automotive power electronics packages. Bonded interface materials (BIMs) with superior thermal performance have the potential to be a replacement to the conventional TIMs. However, due to coefficient of thermal expansion mismatches between different components in a package and resultant thermomechanical stresses, fractures or delamination could occur, causing serious reliability concerns. These defects manifest themselves in increased thermal resistance in the package. In this paper, the results of reliability evaluation of emerging BIMs for large-area attachments in power electronics packaging are reported. Thermoplastic (polyamide) adhesive with embedded near-vertical-aligned carbon fibers, sintered silver, and conventional lead solder (Sn63Pb37) materials were bonded between 50.8 mm x 50.8 mm cross-sectional footprint silicon nitride substrates and copper base plate samples, and were subjected to accelerated thermal cycling until failure or 2500 cycles. Damage in the BIMs was monitored every 100 cycles by scanning acoustic microscopy. Thermoplastic with embedded carbon fibers performed the best with no defects, whereas sintered silver and lead solder failed at 2300 and 1400 thermal cycles, respectively. Besides thermal cycling, additional lead solder samples were subjected to thermal shock and thermal cycling with extended dwell periods. A finite element method (FEM)-based model was developed to simulate the behavior of lead solder under thermomechanical loading. Strain energy density per cycle results were calculated from the FEM simulations. A predictive lifetime model was formulated for lead solder by correlating strain energy density results extracted from modeling with cycles-to-failure obtained from experimental accelerated tests. A power-law-based approach was used to formulate the - redictive lifetime model.

  4. Reliability of emerging bonded interface materials for large-area attachments

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Paret, Paul P.; DeVoto, Douglas J.; Narumanchi, Sreekant

    2015-12-30

    In this study, conventional thermal interface materials (TIMs), such as greases, gels, and phase change materials, pose bottlenecks to heat removal and have long caused reliability issues in automotive power electronics packages. Bonded interface materials (BIMs) with superior thermal performance have the potential to be a replacement to the conventional TIMs. However, due to coefficient of thermal expansion mismatches between different components in a package and resultant thermomechanical stresses, fractures or delamination could occur, causing serious reliability concerns. These defects manifest themselves in increased thermal resistance in the package. In this paper, the results of reliability evaluation of emerging BIMsmore » for large-area attachments in power electronics packaging are reported. Thermoplastic (polyamide) adhesive with embedded near-vertical-aligned carbon fibers, sintered silver, and conventional lead solder (Sn63Pb37) materials were bonded between 50.8 mm x 50.8 mm cross-sectional footprint silicon nitride substrates and copper base plate samples, and were subjected to accelerated thermal cycling until failure or 2500 cycles. Damage in the BIMs was monitored every 100 cycles by scanning acoustic microscopy. Thermoplastic with embedded carbon fibers performed the best with no defects, whereas sintered silver and lead solder failed at 2300 and 1400 thermal cycles, respectively. Besides thermal cycling, additional lead solder samples were subjected to thermal shock and thermal cycling with extended dwell periods. A finite element method (FEM)-based model was developed to simulate the behavior of lead solder under thermomechanical loading. Strain energy density per cycle results were calculated from the FEM simulations. A predictive lifetime model was formulated for lead solder by correlating strain energy density results extracted from modeling with cycles-to-failure obtained from experimental accelerated tests. A power-law-based approach was used to formulate the - redictive lifetime model.« less

  5. Safety Culture at the WTP White Paper: Potential Attachment for Advice on Waste Treatment Plant Safety Culture

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    29/2011 Page 1 of 6 Safety Culture at the WTP White Paper: Potential Attachment for Advice on Waste Treatment Plant Safety Culture Introduction This white paper provides context for the Hanford Advisory Board's (HAB) concerns regarding safety culture at the Waste Treatment Plant (WTP). This document is intended to clarify terminology associated with "safety culture" and to provide background about its conception, application, and development. The HAB has advised that a rigorous safety

  6. DOE TRANSCOM Technical Support Services DE-EM0002903 ATTACHMENT J-9: DOE OFFICE OF ENVIRONMENTAL MANAGEMENT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATTACHMENT J-9: DOE OFFICE OF ENVIRONMENTAL MANAGEMENT FY 13 ANNUAL PERFORMANCE AGREEMENT FY13 Annual Performance Agreement U.S. Department of Energy Office of Environmental Management 11/28/2012 Office of Environmental Management Office of Environmental Management Page 2 Page Intentionally Blank Office of Environmental Management Page 3 FY 2013 Performance Agreement with the Senior Advisor for the Office of Environmental Management The Office of Environmental Management (EM) is working to

  7. Resource conservation and recovery act draft hazardous waste facility permit: Waste Isolation Pilot Plant (WIPP). Attachments: Volume 4 of 4

    SciTech Connect (OSTI)

    Not Available

    1993-08-01

    Volume IV contains the following attachments for Module IV: VOC monitoring plan for bin-room tests (Appendix D12); bin emission control and VOC monitoring system drawings; bin scale test room ventilation drawings; WIPP supplementary roof support system, underground storage area, room 1, panel 1, DOE/WIPP 91-057; and WIPP supplementary roof support system, room 1, panel 1, geotechnical field data analysis bi-annual report, DOE/WIPP 92-024.

  8. Microsoft PowerPoint - Window_Attachments-Webinar-Oct_28_2015_PNNL-SA-114072.pptx [Read-Only]

    Energy Savers [EERE]

    Building America Energy Savings from Window Attachments: Please Mind the Gap Moderator: Nicole Harrison- National Renewable Energy Laboratory Panelists: Katherine Cort - Pacific Northwest National Laboratory Thomas Culp - Birch Point Consulting Joseph Petersen- Pacific Northwest National Laboratory October 28, 2015 PNNL-SA-114072 2 Katherine Cort, Project Lead, Pacific Northwest National Laboratory * Katherine "Katie" Cort is an economist with PNNL and team lead of Building America's

  9. Request for Proposal No. DE-SOL-0007749 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    National Nuclear Security Administration (NNSA)

    III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J LIST OF APPENDICES - TABLE OF CONTENTS Appendix A Statement of Work Appendix B Award Fee Plan Appendix C Transition Plan Appendix D Sensitive Foreign Nations Control Appendix E Performance Guarantee Agreement(s) Appendix F National Work Breakdown Structure Appendix G Personnel Appendix Appendix H Key Personnel Appendix I Small Business Subcontracting Plan Appendix J Diversity Plan Guidance Appendix K List of Applicable Directives

  10. Determining the exact number of dye molecules attached to colloidal CdSe/ZnS quantum dots in Frster resonant energy transfer assemblies

    SciTech Connect (OSTI)

    Kaiser, Uwe; Jimenez de Aberasturi, Dorleta; Vzquez-Gonzlez, Margarita; Carrillo-Carrion, Carolina; Niebling, Tobias; Parak, Wofgang J.; Heimbrodt, Wolfram

    2015-01-14

    Semiconductor quantum dots functionalized with organic dye molecules are important tools for biological sensor applications. Energy transfer between the quantum dot and the attached dyes can be utilized for sensing. Though important, the determination of the real number of dye molecules attached per quantum dot is rather difficult. In this work, a method will be presented to determine the number of ATTO-590 dye molecules attached to CdSe/ZnS quantum dots based on time resolved spectral analysis. The energy transfer from the excited quantum dot to the attached ATTO-590 dye leads to a reduced lifetime of the quantum dot's excitons. The higher the concentration of dye molecules, the shorter the excitonic lifetime becomes. However, the number of dye molecules attached per quantum dot will vary. Therefore, for correctly explaining the decay of the luminescence upon photoexcitation of the quantum dot, it is necessary to take into account the distribution of the number of dyes attached per quantum dot. A Poisson distribution of the ATTO-590 dye molecules not only leads to excellent agreement between experimental and theoretical decay curves but also additionally yields the average number of dye molecules attached per quantum dot. In this way, the number of dyes per quantum dot can be conveniently determined.

  11. Building America Case Study: Predicting Envelope Leakage in Attached Dwellings (Fact Sheet), Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Predicting Envelope Leakage in Attached Dwellings PROJECT INFORMATION Project Name: Predicting Envelope Leakage in Attached Dwellings Consortium for Advanced Residential Buildings, carb-swa.com Building Component: Building envelope Application: New and retrofit; multifamily Year Tested: 2013 Applicable Climate Zone(s): All POTENTIAL BENEFITS OF MODEL Requires substantially fewer resources in the field-equipment, personnel, and time, because only solo test values are needed. Does not require

  12. Cladding Attachment Over Thick Exterior Insulating Sheathing (Fact Sheet), Building America Case Study: Technology Solutions for New and Existing Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cladding Attachment Over Thick Exterior Insulating Sheathing Project InformatIon: Project name: Cladding Attachment Over Thick Exterior Insulating Sheathing Partners: Building Science Corporation www.buildingscience.com The Dow Chemical Company www.dow.com James Hardie Building Products www.jameshardie.com Building component: Building envelope component application: New and/or retrofit; Single and/or multifamily Year research conducted: 2011 through 2012 applicable climate Zone(s): All The

  13. Building America Case Study:Cladding Attachment Over Mineral Fiber Insulation Board (Fact Sheet), Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    Energy Savers [EERE]

    Cladding Attachment Over Mineral Fiber Insulation Board Ontario, Canada PROJECT INFORMATION Project Name: Climate-Exposed Long- Term Testing of Mineral Fiber Insulation Board Under Cladding Attachment Load Location: Ontario, Canada Partners: Building Science Laboratories, buildingsciencelabs.com Building Science Corporation, buildingscience.com Building Component: Above-grade frame wall Application: Both new construction and retrofit; wood-framed buildings Year Tested: 2012-2013 Applicable

  14. Determining Orientational Structure of Diamondoid Thiols Attached to Silver Using Near Edge X-ray Absorption Fine Structure Spectroscopy

    SciTech Connect (OSTI)

    Willey, T M; Lee, J I; Fabbri, J D; Wang, D; Nielsen, M; Randel, J C; Schreiner, P R; Fokin, A A; Tkachenko, B A; Fokina, N A; Dahl, J P; Carlson, R K; Terminello, L J; Melosh, N A; van Buuren, T

    2008-10-07

    Near-edge x-ray absorption fine structure spectroscopy (NEXAFS) is a powerful tool for determination of molecular orientation in self-assembled monolayers and other surface-attached molecules. A general framework for using NEXAFS to simultaneously determine molecular tilt and twist of rigid molecules attached to surfaces is presented. This framework is applied to self-assembled monolayers of higher diamondoid, hydrocarbon molecules with cubic-diamond-cage structures. Diamondoid monolayers chemisorbed on metal substrates are known to exhibit interesting electronic and surface properties. This work compares molecular orientation in monolayers prepared on silver substrates using two different thiol positional isomers of [121]tetramantane, and thiols derived from two different pentamantane structural isomers, [1212]pentamantane and [1(2,3)4]pentamantane. The observed differences in monolayer structure demonstrate the utility and limitations of NEXAFS spectroscopy and the framework. The results also demonstrate the ability to control diamondoid assembly, in particular the molecular orientational structure, providing a flexible platform for the modification of surface properties with this exciting new class of nanodiamond materials.

  15. Effect of particles attachment to multi-sized dust grains present in electrostatic sheaths of discharge plasmas

    SciTech Connect (OSTI)

    Zaham, B.; Tahraoui, A. Chekour, S.; Benlemdjaldi, D.

    2014-12-15

    The loss of electrons and ions due to their attachment to a Gauss-distributed sizes of dust grains present in electrostatic sheaths of discharge plasmas is investigated. A uni-dimensional, unmagnetized, and stationary multi-fluid model is proposed. Forces acting on the dust grain along with its charge are self-consistently calculated, within the limits of the orbit motion limited model. The dynamic analysis of dust grains shows that the contribution of the neutral drag force in the net force acting on the dust grain is negligible, whereas the contribution of the gravity force is found considerable only for micrometer particles. The dust grains trapping is only possible when the electrostatic force is balanced by the ion drag and the gravity forces. This trapping occurs for a limited radius interval of micrometer dust grains, which is around the most probable dust grain radius. The effect of electron temperature and ion density at the sheath edge is also discussed. It is shown that the attachment of particles reduces considerably the sheath thickness and induces dust grain deceleration. The increase of the lower limit as well as the upper limit of the dust radius reduces also the sheath thickness.

  16. In-Situ TEM Study Of Lithiation Behavior Of Silicon Nanoparticles Attached To And Embedded In A Carbon Matrix

    SciTech Connect (OSTI)

    Gu, Meng; Li, Ying; Li, Xiaolin; Hu, Shenyang Y.; Zhang, Xiangwu; Xu, Wu; Thevuthasan, Suntharampillai; Baer, Donald R.; Zhang, Jiguang; Liu, Juan; Wang, Chong M.

    2012-08-23

    Rational design of silicon and carbon nanocomposite with a special topological feature has been demonstrated to be a feasible way for mitigating the capacity fading associated with the large volume change of silicon anode in lithium ion batteries. Although the lithiation behavior of silicon and carbon as individual component has been well understood, lithium ion transport behavior across a network of silicon and carbon are still lacking. In this paper, we probe the lithiation behavior of silicon nanoparticles attached to and embedded in a carbon nanofiber using in-situ TEM and continuum mechanical calculation. We found that aggregated silicon nanoparticles show contact flattering upon initial lithiation, which is characteristically analogous to the classic sintering of powder particles by neck-growth mechanism. As compared with the surface-attached silicon particle, particles embedded in the carbon matrix show delayed lithiation. Depending on the strength of the carbon matrix, lithiation of the embedded silicon nanoparticle can lead to the fracture of the carbon fiber. These observations provide insights on lithium ion transport in the network structured composite of silicon and carbon, and ultimately provide fundamental guidance for mitigating the failure of battery due to the large volume change of silicon anode.

  17. Comparative electron paramagnetic resonance investigation of reduced graphene oxide and carbon nanotubes with different chemical functionalities for quantum dot attachment

    SciTech Connect (OSTI)

    Pham, Chuyen V.; Krueger, Michael E-mail: emre.erdem@physchem.uni-freiburg.de; Eck, Michael; Weber, Stefan; Erdem, Emre E-mail: emre.erdem@physchem.uni-freiburg.de

    2014-03-31

    Electron paramagnetic resonance (EPR) spectroscopy has been applied to different chemically treated reduced graphene oxide (rGO) and multiwalled carbon nanotubes (CNTs). A narrow EPR signal is visible at g?=?2.0029 in both GO and CNT-Oxide from carbon-related dangling bonds. EPR signals became broader and of lower intensity after oxygen-containing functionalities were reduced and partially transformed into thiol groups to obtain thiol-functionalized reduced GO (TrGO) and thiol-functionalized CNT (CNT-SH), respectively. Additionally, EPR investigation of CdSe quantum dot-TrGO hybrid material reveals complete quenching of the TrGO EPR signal due to direct chemical attachment and electronic coupling. Our work confirms that EPR is a suitable tool to detect spin density changes in different functionalized nanocarbon materials and can contribute to improved understanding of electronic coupling effects in nanocarbon-nanoparticle hybrid nano-composites promising for various electronic and optoelectronic applications.

  18. Development of a Chemoenzymatic-like and Photoswitchable Method for the Ordered Attachment of Proteins to Surfaces

    SciTech Connect (OSTI)

    Camarero, J A; Kwon, Y; Coleman, M

    2005-02-11

    Protein arrays are the best tool for the rapid analysis of a whole proteome thus helping to identify all the protein/protein interactions in a living cell and they can also be used as powerful biosensors. The objective of this proposal is to develop a new entropically activated ligation method based in the naturally occurring protein trans-splicing process. This method will be used for the generation of spatially addressable arrays of multiple protein components by standard photolithographic techniques. Key to our approach is the use of the protein trans-splicing process. This naturally occurring process will allow us to create a truly generic and highly efficient method for the covalent attachment of proteins through its C-terminus to any solid support.

  19. Towards understanding of Nipah virus attachment protein assembly and the role of protein affinity and crowding for membrane curvature events.

    SciTech Connect (OSTI)

    Stachowiak, Jeanne C.; Hayden, Carl C.; Negrete, Oscar A.; Davis, Ryan Wesley; Sasaki, Darryl Yoshio

    2013-10-01

    Pathogenic viruses are a primary threat to our national security and to the health and economy of our world. Effective defense strategies to combat viral infection and spread require the development of understanding of the mechanisms that these pathogens use to invade the host cell. We present in this report results of our research into viral particle recognition and fusion to cell membranes and the role that protein affinity and confinement in lipid domains plays in membrane curvature in cellular fusion and fission events. Herein, we describe 1) the assembly of the G attachment protein of Nipah virus using point mutation studies to define its role in viral particle fusion to the cell membrane, 2) how lateral pressure of membrane bound proteins induce curvature in model membrane systems, and 3) the role of membrane curvature in the selective partitioning of molecular receptors and specific affinity of associated proteins.

  20. Stigma models: Testing hypotheses of how images of Nevada are acquired and values are attached to them

    SciTech Connect (OSTI)

    Jenkins-Smith, H.C.

    1994-12-01

    This report analyzes data from surveys on the effects that images associated with nuclear power and waste (i.e., nuclear images) have on people`s preference to vacation in Nevada. The analysis was stimulated by a model of imagery and stigma which assumes that information about a potentially hazardous facility generates signals that elicit negative images about the place in which it is located. Individuals give these images negative values (valences) that lessen their desire to vacation, relocate, or retire in that place. The model has been used to argue that the proposed Yucca Mountain high-level nuclear waste repository could elicit images of nuclear waste that would stigmatize Nevada and thus impose substantial economic losses there. This report proposes a revised model that assumes that the acquisition and valuation of images depend on individuals` ideological and cultural predispositions and that the ways in which new images will affect their preferences and behavior partly depend on these predispositions. The report tests these hypotheses: (1) individuals with distinct cultural and ideological predispositions have different propensities for acquiring nuclear images, (2) these people attach different valences to these images, (3) the variations in these valences are important, and (4) the valences of the different categories of images within an individual`s image sets for a place correlate very well. The analysis largely confirms these hypotheses, indicating that the stigma model should be revised to (1) consider the relevant ideological and cultural predispositions of the people who will potentially acquire and attach value to the image, (2) specify the kinds of images that previously attracted people to the host state, and (3) consider interactions between the old and potential new images of the place. 37 refs., 18 figs., 17 tabs.

  1. Comparison of AEO 2006 Natural Gas Price Forecast to NYMEX FuturesPrices

    SciTech Connect (OSTI)

    Bolinger, Mark; Wiser, Ryan

    2005-12-19

    On December 12, 2005, the reference case projections from ''Annual Energy Outlook 2006'' (AEO 2006) were posted on the Energy Information Administration's (EIA) web site. We at LBNL have in the past compared the EIA's reference case long-term natural gas price forecasts from the AEO series to contemporaneous natural gas prices that can be locked in through the forward market, with the goal of better understanding fuel price risk and the role that renewables play in mitigating such risk (see, for example, http://eetd.lbl.gov/ea/EMS/reports/53587.pdf or http://eetd.lbl.gov/ea/ems/reports/54751.pdf). As such, we were curious to see how the latest AEO gas price forecast compares to the NYMEX natural gas futures strip. This brief memo presents our findings. As a refresher, our past work in this area has found that over the past five years, forward natural gas contracts (with prices that can be locked in--e.g., gas futures, swaps, and physical supply) have traded at a premium relative to contemporaneous long-term reference case gas price forecasts from the EIA. As such, we have concluded that, over the past five years at least, levelized cost comparisons of fixed-price renewable generation with variable price gas-fired generation that have been based on AEO natural gas price forecasts (rather than forward prices) have yielded results that are ''biased'' in favor of gas-fired generation, presuming that long-term price stability is valued. In this memo we simply update our past analysis to include the latest long-term gas price forecast from the EIA, as contained in AEO 2006. For the sake of brevity, we do not rehash information (on methodology, potential explanations for the premiums, etc.) contained in our earlier reports on this topic; readers interested in such information are encouraged to download that work from http://eetd.lbl.gov/ea/EMS/reports/53587.pdf or http://eetd.lbl.gov/ea/ems/reports/54751.pdf. As was the case in the past five AEO releases (AEO 2001-AEO 2005), we once again find that the AEO 2006 reference case gas price forecast falls well below where NYMEX natural gas futures contracts were trading at the time the EIA finalized its gas price forecast. In fact, the NYMEX-AEO 2006 reference case comparison yields by far the largest premium--$2.3/MMBtu levelized over five years--that we have seen over the last six years. In other words, on average, one would have had to pay $2.3/MMBtu more than the AEO 2006 reference case natural gas price forecast in order to lock in natural gas prices over the coming five years and thereby replicate the price stability provided intrinsically by fixed-price renewable generation (or other forms of generation whose costs are not tied to the price of natural gas). Fixed-price generation (like certain forms of renewable generation) obviously need not bear this added cost, and moreover can provide price stability for terms well in excess of five years.

  2. Comparison of AEO 2007 Natural Gas Price Forecast to NYMEX FuturesPrices

    SciTech Connect (OSTI)

    Bolinger, Mark; Wiser, Ryan

    2006-12-06

    On December 5, 2006, the reference case projections from 'Annual Energy Outlook 2007' (AEO 2007) were posted on the Energy Information Administration's (EIA) web site. We at LBNL have, in the past, compared the EIA's reference case long-term natural gas price forecasts from the AEO series to contemporaneous natural gas prices that can be locked in through the forward market, with the goal of better understanding fuel price risk and the role that renewables play in mitigating such risk (see, for example, http://eetd.lbl.gov/ea/EMS/reports/53587.pdf or http://eetd.lbl.gov/ea/ems/reports/54751.pdf). As such, we were curious to see how the latest AEO gas price forecast compares to the NYMEX natural gas futures strip. This brief memo presents our findings. As a refresher, our past work in this area has found that over the past six years, forward natural gas contracts (with prices that can be locked in--e.g., gas futures, swaps, and physical supply) have traded at a premium relative to contemporaneous long-term reference case gas price forecasts from the EIA. As such, we have concluded that, over the past six years at least, levelized cost comparisons of fixed-price renewable generation with variable-price gas-fired generation that have been based on AEO natural gas price forecasts (rather than forward prices) have yielded results that are 'biased' in favor of gas-fired generation, presuming that long-term price stability is valued. In this memo we simply update our past analysis to include the latest long-term gas price forecast from the EIA, as contained in AEO 2007. For the sake of brevity, we do not rehash information (on methodology, potential explanations for the premiums, etc.) contained in our earlier reports on this topic; readers interested in such information are encouraged to download that work from http://eetd.lbl.gov/ea/EMS/reports/53587.pdf or http://eetd.lbl.gov/ea/ems/reports/54751.pdf. As was the case in the past six AEO releases (AEO 2001-AEO 2006), we once again find that the AEO 2007 reference case gas price forecast falls well below where NYMEX natural gas futures contracts were trading at the time the EIA finalized its gas price forecast. Specifically, the NYMEX-AEO 2007 premium is $0.73/MMBtu levelized over five years. In other words, on average, one would have had to pay $0.73/MMBtu more than the AEO 2007 reference case natural gas price forecast in order to lock in natural gas prices over the coming five years and thereby replicate the price stability provided intrinsically by fixed-price renewable generation (or other forms of generation whose costs are not tied to the price of natural gas). Fixed-price generation (like certain forms of renewable generation) obviously need not bear this added cost, and moreover can provide price stability for terms well in excess of five years.

  3. Energy Efficiency and Renewables: Market and Behavioral Failures

    ScienceCinema (OSTI)

    James Sweeney

    2010-09-01

    Thursday, January 28, 2010: Policies to promote renewable energy and energy efficiency have been gaining momentum throughout the world, often justified by environmental and energy security concerns. This presentation first talks about energy efficiency options, then delves into the economic motivation for energy efficiency and renewable energy policies by articulating the classes of relevant behavioral failures and market failures. Such behavioral and market failures may vary intertemporally or atemporally; the temporal structure and the extent of the failures are the critical considerations in the development of energy policies. The talk discusses key policy instruments and assess the extent to which they are well-suited to correct for failures with different structures. http://eetd.lbl.gov/dls/lecture-01-28...

  4. Recommendation of a Strategy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Accelerating Radiance Using OpenCL on GPU Wangda Zuo, Ph.D. Simulation Research Group Energy and Environmental Technologies Division Lawrence Berkeley National Laboratory EETD...

  5. EETDseminar.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Two Examples of Using NERSC in EETD Projects A project in the Airflow and Pollutant Transport Group was using many hours of serial computing to perform numerical...

  6. NERSC Intro for Environmental Energy Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Technologies June 22, 2011 eetd software 12:00 - 13:00 PDT June 22, 2011 Environmental Energy Technologies Division Lawrence Berkeley National Laboratory NERSC...

  7. Remedial action plan and site design for stabilization of the inactive Uranium Mill Tailing site Maybell, Colorado. Attachment 3, ground water hydrology report, Attachment 4, water resources protection strategy. Final report

    SciTech Connect (OSTI)

    Not Available

    1994-06-01

    The U.S. Environmental Protection Agency (EPA) has established health and environmental regulations to correct and prevent ground water contamination resulting from former uranium processing activities at inactive uranium processing sites (40 CFR Part 192 (1993)) (52 FR 36000 (1978)). According to the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978 (42 USC {section} 7901 et seq.), the U.S. Department of Energy (DOE) is responsible for assessing the inactive uranium processing sites. The DOE has decided that each assessment will include information on hydrogeologic site characterization. The water resources protection strategy that describes the proposed action compliance with the EPA ground water protection standards is presented in Attachment 4, Water Resources Protection Strategy. Site characterization activities discussed in this section include the following: (1) Definition of the hydrogeologic characteristics of the environment, including hydrostratigraphy, aquifer parameters, areas of aquifer recharge and discharge, potentiometric surfaces, and ground water velocities. (2) Definition of background ground water quality and comparison with proposed EPA ground water protection standards. (3) Evaluation of the physical and chemical characteristics of the contaminant source and/or residual radioactive materials. (4) Definition of existing ground water contamination by comparison with the EPA ground water protection standards. (5) Description of the geochemical processes that affect the migration of the source contaminants at the processing site. (6) Description of water resource use, including availability, current and future use and value, and alternate water supplies.

  8. Trial-Run of a Junction-Box Attachment Test for Use in Photovoltaic Module Qualification: Preprint

    SciTech Connect (OSTI)

    Miller, D. C.; Deibert, S. L.; Wohlgemuth, J. H.

    2014-06-01

    Engineering robust adhesion of the junction box (j-box) is a hurdle typically encountered by photovoltaic module manufacturers during product development and manufacturing process control. There are historical incidences of adverse effects (e.g., fires) caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp-heat,' 'thermal-cycle,' or 'creep' tests within the IEC qualification protocol is proposed to verify the basic robustness of the adhesion system. The details of the proposed test are described, in addition to a trial-run of the test procedure. The described experiments examine four moisture-cured silicones, four foam tapes, and a hot-melt adhesive used in conjunction with glass, KPE, THV, and TPE substrates. For the purpose of validating the experiment, j-boxes were adhered to a substrate, loaded with a prescribed weight, and then subjected to aging. The replicate mock-modules were aged in an environmental chamber (at 85 degrees C/85% relative humidity for 1000 hours; then 100 degrees C/<10% relative humidity for 200 hours) or fielded in Golden (CO), Miami (FL), and Phoenix (AZ) for one year. Attachment strength tests, including pluck and shear test geometries, were also performed on smaller component specimens.

  9. Attachment C2

    Office of Environmental Management (EM)

    C2 1 RESERVED 2

  10. Attachment L-7c

    National Nuclear Security Administration (NNSA)

    building, testing, and shipping. 9.0 Sustainability Maintenance and repair activities ... Testing and Evaluation Mobile Vans Sustainability Project Management Grand Total Labor ...

  11. attachment-1.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  12. Attachment C3

    Office of Environmental Management (EM)

    C3 QUALITY ASSURANCE OBJECTIVES AND DATA VALIDATION TECHNIQUES FOR WASTE CHARACTERIZATION METHODS Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page ...

  13. Attachment F2

    Office of Environmental Management (EM)

    F2 TRAINING COURSE AND QUALIFICATION CARD OUTLINES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant ...

  14. Attachment C6

    Office of Environmental Management (EM)

    C6 AUDIT AND SURVEILLANCE PROGRAM Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste ...

  15. Attachment C1

    Office of Environmental Management (EM)

    C1 WASTE CHARACTERIZATION TESTING METHODS Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous ...

  16. Attachment G3

    Office of Environmental Management (EM)

    G3 RADIOLOGICAL SURVEYS TO INDICATE POTENTIAL HAZARDOUS WASTE RELEASES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste ...

  17. Attachment C4

    Office of Environmental Management (EM)

    C4 TRU MIXED WASTE CHARACTERIZATION USING ACCEPTABLE KNOWLEDGE Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation ...

  18. Attachment G2

    Office of Environmental Management (EM)

    G2 WASTE ISOLATION PILOT PLANT SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally ...

  19. DPF heater attachment mechanisms

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

    2011-04-26

    An exhaust filter system includes a particulate filter (PF) that is disposed downstream from an engine. The PF filters particulates within an exhaust from the engine. A heating element heats particulate matter in the PF. A fastener limits expansion movement of the heating element relative to the PF.

  20. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, Gary L. (Alpine, CA)

    1995-01-01

    A retainer ring is arranged to mount turbine blades to a turbine disk so that aerodynamic forces produced by a gas turbine engine are transferred from the turbine blades to the turbine disk to cause the turbine blades and turbine disk to rotate, but so that centrifugal forces of the turbine blades resulting from the rotation of the turbine blades and turbine disk are not transferred from the turbine blades to the turbine disk.

  1. Attachment 3 of 5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Due to its concerns about these inconsistencies, the Washington Department of Ecology (Ecology) required that DOE develop and submit a tank waste treatment Recovery Plan...

  2. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, G.L.

    1995-04-11

    A retainer ring is arranged to mount turbine blades to a turbine disk so that aerodynamic forces produced by a gas turbine engine are transferred from the turbine blades to the turbine disk to cause the turbine blades and turbine disk to rotate, but so that centrifugal forces of the turbine blades resulting from the rotation of the turbine blades and turbine disk are not transferred from the turbine blades to the turbine disk. 6 figures.

  3. Attachment N1

    Office of Environmental Management (EM)

    N1 HYDROGEN AND METHANE MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit January 31, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous...

  4. Attachment BŽ

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mitigation Action Plan for the Environmental Assessment and Finding of No Significant Impact for the Reconstruction of the South Access Road, Eddy County, New Mexico January 2010 DOE/CBFO-10-3444 NEPA #: DOE-BLM-NM-P020-2010-0011-EA U.S. Department of Energy Carlsbad Field Office DOE/CBFO-10-3444 1 1.0 INTRODUCTION The United States Department of Energy (DOE), Carlsbad Field Office (CBFO) has adopted a Final Environmental Assessment (EA) prepared by the United States Department of the Interior,

  5. Attachment 3 of 5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    include the assumption that an approved Risk Assessment Work Plan and Preliminary Risk Assessment are not required before the RCRA permit is issued.. For M-62-11, the RPP...

  6. ATTACHMENT J - APPENDIX I

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    042511 050813 Quality Assurance O 420.1C Chg. 1 120412 022715 Facility Safety O 422.1 Chg. 1 Chg. 2 062910 062513 120314 Conduct of Operations O 435.1 Chg. 1 070999...

  7. Attachment C5

    Office of Environmental Management (EM)

    pages need to 39 be reissued. Changes to documents, other than those defined as editorial changes or minor 40 changes, shall be reviewed and approved by the same functional...

  8. Attachment L-7c

    National Nuclear Security Administration (NNSA)

    c [Type here] VIETNAM MOBILIZATION PLAN DE-SOL-0008449 1.0 INTRODUCTION Based on the information presented below, the Statement of Work requirements relating to in- country deployments, and the Work Breakdown Structure (WBS) provided in Table 1, the Offeror shall develop a mobilization plan that describes its approach to a comprehensive Nuclear Smuggling Detection and Deterrence (NSDD) deployment involving Port of Cat Lai seaport in Vietnam. 2.0 REQUIREMENTS The Offeror shall provide a plan for

  9. Attachment H1

    Office of Environmental Management (EM)

    NMAC, incorporating: 7 * 40 CFR 264.117(a)(1), which requires that 8 "Post-closure care for each hazardous waste management unit subject to the 9 requirements of 264.117...

  10. SECTION L… ATTACHMENT H

    National Nuclear Security Administration (NNSA)

    III-SECTION J APPENDIX K TRANSITION PLAN To be Added at a Later Date

  11. River Corridor Closure Contract Section J, Attachment J-2 Contract No. DE-AC06-05RL14655 Modification 627

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Contract No. DE-AC06-05RL14655 Modification 627 1 SECTION J, ATTACHMENT J-2 DOE DIRECTIVES APPLICABLE TO THE RIVER CORRIDOR CLOSURE CONTRACT The DOE Directives found in the following list constitute the List B - List of Applicable Directives, referenced in the Section I clause entitled Laws, Regulations, and DOE Directives. The Contractor should follow the established procedure to obtain relief from requirements of these directives where applicable. It is anticipated during the performance of

  12. DOE-HDBK-1122-99 Radiological Control Technical Training, Facility Practical Training Attachment Phase IV, Part 9 0f 9

    Office of Environmental Management (EM)

    Radiological Control Technician Training Facility Practical Training Attachment Phase IV Coordinated and Conducted for Office of Environment, Safety & Health U.S. Department of Energy DOE-HDBK-1122-99 ii This page intentionally left blank DOE-HDBK-1122-99 iii Course Developers William Egbert Lawrence Livermore National Laboratory Dave Lent Coleman Research Michael McNaughton Los Alamos National Laboratory Bobby Oliver Lockheed Martin Energy Systems Richard Cooke Argonne National Laboratory

  13. Saving Energy and Improving Environmental Quality

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Laboratory Lawrence Berkeley National Laboratory Environmental Energy Technologies Division Environmental Energy Technologies Division (EETD) (EETD) Saving Energy and Improving Saving Energy and Improving Environmental Quality Environmental Quality William J. Fisk William J. Fisk Acting Division Director Acting Division Director What is the Environmental Energy Technologies Division? US Department of Energy National Laboratory System Lawrence Berkeley National Laboratory ~4000 Employees Managed

  14. The Exosporium of B.cereus Contains a Binding Site for gC1qR/p33: Implication in Spore Attachment and/or Entry.

    SciTech Connect (OSTI)

    GHEBREHIWET,B.; TANTRAL, L.; TITMUS, M.A.; PANESSA-WARREN, B.J.; TORTORA, G.T.; WONG, S.S.; WARREN, J.B.

    2008-01-01

    B. cereus, is a member of a genus of aerobic, gram-positive, spore-forming rod-like bacilli, which includes the deadly, B. anthracis. Preliminary experiments have shown that gC1qR binds to B.cereus spores that have been attached to microtiter plates. The present studies were therefore undertaken, to examine if cell surface gC1qR plays a role in B.cereus spore attachment and/or entry. Monolayers of human colon carcinoma (Caco-2) and lung cells were grown to confluency on 6 mm coverslips in shell vials with gentle swirling in a shaker incubator. Then, 2 {micro}l of a suspension of strain SB460 B.cereus spores (3x10{sup 8}/ml, in sterile water), were added and incubated (1-4 h; 36{sup 0} C) in the presence or absence of anti-gC1qR mAb-carbon nanoloops. Examination of these cells by EM revealed that: (1) When B. cereus endospores contacted the apical Caco-2 cell surface, or lung cells, gClqR was simultaneously detectable, indicating upregulation of the molecule. (2) In areas showing spore contact with the cell surface, gClqR expression was often adjacent to the spores in association with microvilli (Caco-2 cells) or cytoskeletal projections (lung cells). (3) Furthermore, the exosporia of the activated and germinating spores were often decorated with mAb-nanoloops. These observations were further corroborated by experiments in which B.cereus spores were readily taken up by monocytes and neutrophils, and this uptake was partially inhibited by mAb 60.11, which recognizes the C1q binding site on gC1qR. Taken together, the data suggest a role, for gC1qR at least in the initial stages of spore attachment and/or entry.

  15. http://www.energy.gov/news/archives/print/5500.htm

    National Nuclear Security Administration (NNSA)

    Reinforces U.S. Commitment to Nonproliferation VIENNA, AUSTRIA - Secretary of Energy Samuel W. Bodman today announced that the Department of Energy's National Nuclear...

  16. http://www.energy.gov/news/archives/print/5471.htm

    National Nuclear Security Administration (NNSA)

    For Immediate Release September 5, 2007 Department of Energy Announces Decision to Consolidate Surplus Plutonium in South Carolina WASHINGTON, DC - The U.S. Department of Energy...

  17. http://earthquake.usgs.gov/earthquakes/eqarchives/epic/epic_cir

    National Nuclear Security Administration (NNSA)

    Circular Area Earthquake Search

  18. http://ndep.nv.gov/boff/ntsrod.htm

    National Nuclear Security Administration (NNSA)

    Record of Decision Environmental Impact Statement for the Nevada Test Site and Off-Site Locations in the State of Nevada Table of Contents Summary Supplementary Information Alternatives Considered Environmentally Preferable Alternative Environmental Impacts of Alternatives Comments on the Final Environmental Impact Statement Other Decision Factors Decisions Mitigation Conclusion SUMMARY: The Department of Energy (DOE) is issuing this Record of Decision on the management and operation of the

  19. http://www.blm.gov/nstc/VRM/8400.html

    National Nuclear Security Administration (NNSA)

    Manual 8400 - Visual Resource Management Table of Contents .01 Purpose .02 Objectives .03 Authority .04 Responsibility .05 References .06 Policy .07 Overview of Visual Resource Management System Glossary of Terms Illustrations 1. Visual Resource Management System for BLM Bibliography .01 Purpose. This section describes the overall policy direction for Visual Resource Management (VRM) in the Bureau of Land Management (BLM). .02 Objectives. The objective of Visual Resource Management is to manage

  20. http://www.bls.gov/iif/oshcfoi1.htm

    National Nuclear Security Administration (NNSA)

    gov

  1. http://www.epa.gov/air/data/index.html

    National Nuclear Security Administration (NNSA)

  2. http://www.epa.gov/fedrgstr/eo/eo13175.htm

    National Nuclear Security Administration (NNSA)

    Federal Register Executive Orders Executive Order 13175 - Consultation and Coordination With Indian Tribal Governments Executive Order 13175 - Consultation and Coordination With Indian Tribal Governments Note: EPA no longer updates this information, but it may be useful as a reference or resource. [Federal Register: November 9, 2000 (Volume 65, Number 218)] [Presidential Documents] [Page 67249-67252] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr09no00-167]

  3. http://www.lvvwd.com/about/wr.html

    National Nuclear Security Administration (NNSA)

    Water Resources Southern Nevada gets nearly 90 percent of its water from the Colorado River. The other 10 percent of our water comes from groundwater that is pumped out through existing wells within Clark County. Water Resource Plan The Las Vegas Valley Water District is a member agency of the Southern Nevada Water Authority (SNWA), which develops and maintains a Water Resource Plan that serves all the member agencies. The plan includes the history of water in Southern Nevada, the SNWA water

  4. http://www.lvvwd.com/about/wr_groundwater.html

    National Nuclear Security Administration (NNSA)

    Water Resources » Groundwater About 10 percent of the Las Vegas Valley's water comes from groundwater, which is a water supply under the Earth's surface. In some areas, water fills the spaces throughout porous bedrock, alluvial gravels, sands, silts and clays to form a natural reservoir. Groundwater occurs as part of the hydrologic cycle, which is the movement of water between the earth and the atmosphere through evaporation and precipitation. The underground area where groundwater exists is

  5. http://www.neimagazine.com/storyprint.asp?sc=2055166

    National Nuclear Security Administration (NNSA)

    For ten years the US Department of Energy has been transporting weapons-related transuranic (TRU) waste to the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico. To date over 8,000 shipments have been delivered without a serious injury or release of radioactive material. In about March 2010, the WIPP transportation system will pass a huge milestone: 10 million loaded miles driven, over the 11 years that the deep geologic repository has been open. The total number of miles driven is

  6. http://www.ntanet.net/transport-list.html

    National Nuclear Security Administration (NNSA)

    Main Schedule of Courses About the Instructors About NTA Video Series on Radiation Safety NRRPT Exam Practice Software AAHP Exam Practice Software Safety Plans Radiochemistry and Analytical Services Contact Us Transportation of Radioactive Material Nevada Technical Associates, Inc. Phone 702-564-2798 P.O. Box 93355, Las Vegas, NV 89193 Our Transportation of Radioactive Materials course is designed for radiation safety officers, safety officers, technicians, managers and others who may be

  7. http://www.nyecounty.net/index.aspx?NID=566

    National Nuclear Security Administration (NNSA)

    * Calendar * Employment * Staff Directory * News * Forms You are here: Home > Departments > Nuclear Waste Repository Project Office > Nye County Water District Nye County Water District Nye County has long recognized the need for water resource planning and management. Therefore, in 2007 the Nevada Legislature established the Nye County Water District (NCWD) pursuant to Nevada Revised Statue (NRS) Chapter 542. The mission of the NCWD is to develop a long-term sustainability plan of

  8. http://www.wmsym.org/archives/2005/72.html

    National Nuclear Security Administration (NNSA)

    Home Search Proceedings Session Index Author Index Attendee List Exhibitors/Sponsors WM 2006 CD Tech Support 2005 Waste Management Symposium Global Accomplishments in Environmental and Radioactive Waste Management: Cost Effectiveness, Risk Reduction and Technology Implementation Session 72 - Waste Certification, Acceptance and Disposal of Low-Level, Intermediate-Level, Mixed and Hazardous Wastes Thursday, March 3, 2005 - 8:30 AM Chair(s): Heinz Kroeger, TUV Nord EnSys Hannover (GERMANY) Kenneth

  9. http://www.wrcc.dri.edu/cemp/Radiation.html

    National Nuclear Security Administration (NNSA)

    Radiation in Perspective From United States Department of Energy, Nevada Operations Office, August 1990 Radiation-What it is Radiation occurs in the form of energy or as atomic particles. The term "radiation," although broad enough to include sunlight and heat, radiowaves and microwaves, is most often used to mean "ionizing" radiation. That is radiation which changes the physical state of atoms, causing them to become electrically charged or "ionized." The earth

  10. http://wwwdev/cneaf/coal/special/waybill/waybill.html

    Gasoline and Diesel Fuel Update (EIA)

    modes, the Coal Waybill Database is based only on rail shipments. Due to the different nature of the data sources, users should exercise caution when attempting to combine the two...

  11. http://bellview/TeamWorks/TRUTeamWorks.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thursday, 9/4/03 | Total shipments received at WIPP: 1,978 | Shipments expected this week: Hanford (2), LA A weekly e-newsletter for the Waste Isolation Pilot Plant team September 4, 2003 The Big Story Get ready, set, go for 100 Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e

  12. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    15/04 Shipments expected this week: Hanford (2), NTS (2), RFETS (11), SRS (6) January 15, 2004 The Big Story Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of 1/15/04 at 7:09 a.m. Shipments scheduled to arrive at WIPP this week 21 Total shipments

  13. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2/04 Shipments expected this week: Hanford (3), NTS (2), RFETS (11), SRS (6) January 22, 2004 The Big Story Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of 1/22/04 at 7:22 a.m. Shipments scheduled to arrive at WIPP this week 22 Total shipments

  14. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9/04 Shipments expected this week: NTS (2), RFETS (13), SRS (6) January 29, 2004 The Big Story WTS restructures workforce Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of 1/29/04 at 7:14 a.m.) Shipments scheduled to arrive at WIPP this week 21 Total

  15. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A weekly e-newsletter for the Waste Isolation Pilot Plant team September 18, 2003 The Big Story Characterization Operations completed at ANL-E Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of 9-18-03 at 7:17 a.m.) 21 Shipments scheduled to arrive

  16. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | NRC Officials Visit WIPP Tod A weekly e-newsletter for the Waste Isolation Pilot Plant team September 25, 2003 The Big Story Recertification - a work in progress Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of 9-25-03 at 7:16 a.m.) 21 Shipments

  17. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    /03 | Shipments expected this week: Hanford (1), RFETS (11), SRS (6) | A weekly e-newsletter for the Waste Isolation Pilot Plant team October 2, 2003 The Big Story Laboratory setup at CEMRC is teamwork in action Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP

  18. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    16/03 | Shipments expected this week: ANL-E (2) , RFETS (11), SRS (6) | A weekly e-newsletter for the Waste Isolation Pilot Plant team October 16, 2003 The Big Story EM-6 to review WIPP baseline Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of

  19. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3/03 | Shipments expected this week: RFETS (11), SRS (4), Hanford (2) | A weekly e-newsletter for the Waste Isolation Pilot Plant team October 23, 2003 Sealed sources: questions and answers Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of 10/23/03

  20. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    13/03 | Shipments expected this week: RFETS (11), SRS (6) | WIPP welcomes new CBFO Deputy Ma A weekly e-newsletter for the Waste Isolation Pilot Plant team November 13, 2003 The Big Story Farewell to a leader Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP

  1. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    20/03 | Shipments expected this week: Hanford (2), RFETS (14), SRS (6) | A weekly e-newsletter for the Waste Isolation Pilot Plant team November 20, 2003 The Big Story WIPP welcomes Lloyd Piper Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of

  2. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    04/03 | Shipments expected this week: Hanford (2), RFETS (11), SRS (3) | December 4, 2003 The Big Story H.R.2754 to usher in change Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of 12/4/03 at 8:05 a.m.) Shipments scheduled to arrive at WIPP this

  3. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1/03 | Shipments expected this week: Hanford (2), RFETS (11), SRS (3) | December 11, 2003 The Big Story Standardization - a cost saving innovation Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e- mail. WIPP Shipments (as of 12/11/03 at 7:47 a.m.) Shipments scheduled to arrive

  4. http://www.energy.gov/print/6310.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Media Contact(s): Angela Hill, (202) 586-4940 For Immediate Release June 3, 2008 DOE Marks Milestone in Submitting Yucca Mountain License Application WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced submittal of a license application (LA) to the U.S. Nuclear Regulatory Commission (NRC) seeking authorization to construct America's first repository for spent nuclear fuel and high-level radioactive waste at Yucca Mountain, Nevada. The 8,600 page application describes DOE's

  5. http://www.hanford.gov/boards/hab/response/023.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    23 From: Jackson Kinzer 97-WSD-135 Ms. Merilyn B. Reeves, Chair Hanford Advisory Board c/o Confluence Northwest 342 Union Station 800 N.W. Sixth Street Portland, Oregon 97209 Dear Ms. Reeves: HANFORD ADVISORY BOARD (HAB) ADVICE ON VADOSE ZONE The U.S. Department of Energy, Richland Operations Office (RL) welcomes the HAB Consensus Advice #67. The advice is timely as RL. with input from stakeholders and Tribal Nations, develops comprehensive approaches to addressing vadose zone contamination

  6. http://www.hanford.gov/boards/hab/response/054.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    54 From: John D. Wagoner Ms. Merilyn B. Reeves, Chair Hanford Advisory Board 723 The Parkway, Suite 200 Richland, Washington 99352 March 3, 1998 Dear Merilyn Reeves: HANFORD ADVISORY BOARD (HAB) ADVICE ON TANK WASTE REMEDIATION SYSTEM (TWRS) VADOSE ZONE In response to your letter to me, "TWRS Vadose Zone Characterization," dated December 5, 1997, HAB Consensus Advice #83, on Vadose Zone Characterization needed to support the overall mission of the TWRS Program, the U. S. Department of

  7. http://www.hanford.gov/boards/hab/response/067.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    67 From: Jackson Kinzer 97-WSD-135 Ms. Merilyn B. Reeves, Chair Hanford Advisory Board c/o Confluence Northwest 342 Union Station 800 N.W. Sixth Street Portland, Oregon 97209 Dear Ms. Reeves: HANFORD ADVISORY BOARD (HAB) ADVICE ON VADOSE ZONE The U.S. Department of Energy, Richland Operations Office (RL) welcomes the HAB Consensus Advice #67. The advice is timely as RL. with input from stakeholders and Tribal Nations, develops comprehensive approaches to addressing vadose zone contamination

  8. http://www.hanford.gov/boards/hab/response/072.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 From: John D. Wagoner, Tom Fitzsimmons, and Chuck Clarke Ms. Merilyn Reeves, Chair Hanford Advisory Board 723 The Parkway, Suite 200 Richland, Washington 99352 Dear Ms. Reeves: BOARD CONSENSUS ADVICE #72: PROPOSED TRI-PARTY AGREEMENT (TPA) MODIFICATIONS; K BASINS SPENT NUCLEAR FUEL PROJECT (M-34-OOA), JULY 11, 1997 We appreciate the time taken by you and other members of the Hanford Advisory Board (the Board) in reviewing and commenting on the agencies' proposed modifications to the TPA

  9. http://www.hanford.gov/boards/hab/response/073.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 From: John D. Wagoner, Tom Fitzsimmons, and Chuck Clarke Ms. Merilyn Reeves, Chair Hanford Advisory Board 723 The Parkway, Suite 200 Richland, Washington 99352 Dear Ms. Reeves: BOARD CONSENSUS ADVICE #73: PROPOSED TRI-PARTY AGREEMENT (TPA) MODIFICATIONS FOR DISPOSITION OF HANFORD SURPLUS REACTORS (M-93-00), JULY 11, l997 Thank you very much for your recent Board consensus advice and support, regarding the agencies' proposed TPA modifications covering the U.S. Department of Energy's reactors on

  10. http://www.hanford.gov/boards/hab/response/075.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 From: George H. Sanders 97-EAP-712 Mr. Chuck Clarke Regional Administrator U.S. Environmental Protection Agency Region 10 1200 Sixth Avenue Seattle, Washington 98101 Mr. Tom Fitzsimmons. Director State of Washington Department of Ecology P.O. Box 47600 Olympia. Washington 98504 Dear Messrs. Clarke and Fitzsimmons: RESPONSE TO BOARD CONSENSUS ADVICE #75, ENVIRONMENTAL RESTORATION DISPOSAL FACILITY (ERDF) EXPANSION SEPTEMBER 5, 1997 Enclosed is a proposed joint response to a Hanford Advisory

  11. http://www.hanford.gov/boards/hab/response/081.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 From: Tom Fitzsimmons STATE OF WASHINGTON DEPARTMENT OF ECOLOGY P.O. Box 47600 × Olympia, Washington 98504-7600 (360) 407-6000 × TDD Only (Hearing Impaired) (360) 407-6006 December 23,1997 Ms. Merilyn Reeves, Chair Hanford Advisory Board 723 The Parkway, #200 MSIN: Bl-41 Richland, WA 99352 Dear Ms. Reeves: Thank you for forwarding Hanford Advisory Board Advice #81, in which the Board sets out some significant principles concerning Hanford's safety culture. Ecology welcomes the adoption of

  12. http://www.hanford.gov/boards/hab/response/082.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 From: John D. Wagoner, Tom Fitzsimmons, and Chuck Clarke Ms. Merilyn Reeves, Chair Hanford Advisory Board 723 The Parkway, Suite 200 Richland, Washington 99352 Dear Ms. Reeves: BOARD CONSENSUS ADVICE #82: PROPOSED TRI-PARTY AGREEMENT (TPA) COMMITMENTS ON THE 200 AREAS ENVIRONMENTAL RESTORATION SOIL REMEDIATION STRATEGY, DECEMBER 5, The Tri-Party agencies have reviewed the consensus advice provided by the Hanford Advisory Board on December 5, 1997. The agencies thank you for the advice and

  13. http://www.hanford.gov/boards/hab/response/083.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 From: John D. Wagoner Ms. Merilyn B. Reeves, Chair Hanford Advisory Board 723 The Parkway, Suite 200 Richland, Washington 99352 March 3, 1998 Dear Merilyn Reeves: HANFORD ADVISORY BOARD (HAB) ADVICE ON TANK WASTE REMEDIATION SYSTEM (TWRS) VADOSE ZONE In response to your letter to me, "TWRS Vadose Zone Characterization," dated December 5, 1997, HAB Consensus Advice #83, on Vadose Zone Characterization needed to support the overall mission of the TWRS Program, the U. S. Department of

  14. http://www.hanford.gov/boards/hab/response/086.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 From: Jay Rhoderick and Martha Crosland Ms. Merilyn Reeves, Chair Hanford Advisory Board 723 The Parkway, Suite 200 Richland, Washington 99352 December 10, 1998 Dear Ms. Reeves: Thank you for your letter of September 11, 1998, regarding Intersite Waste Disposal. Your letter provided consensus advice from the Hanford Advisory Board (HAB) regarding a request from Site- Specific Advisory Board (SSAB) participants at an August 1998 Nevada Low-Level Waste (LLW) Workshop. At that workshop, SSAB

  15. http://www.hanford.gov/boards/hab/response/088.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 From: Jackson Kinzer Ms. Merilyn Reeves, Chair Hanford Advisory Board 723 The Parkway, Suite 200 Richland, Washington 99352 January 5, 1999 Dear Ms. Reeves: HANFORD ADVISORY BOARD (HAB) ADVICE #88 CONCERNING THE OFFICE OF RIVER PROTECTION (ORP) Thank you for your advice to be considered during development of the ORP management plan that is to be submitted to Congress in mid-January 1999. We are preparing that plan now and are considering your advice. However, we will not be able to make the

  16. http://www.hanford.gov/boards/hab/response/089.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 From: Karen Randolph Ms. Merilyn Reeves, Chair Hanford Advisory Board 723 The Parkway, Suite 200 Richland, Washington 99352 January 14, 1999 Dear Ms. Reeves: This letter is in response to your Hanford Advisory Board letter of advice regarding openness at Hanford, Advice Letter #89 to John Wagoner, RL Manager, and Ralph Lightner, DOE Headquarters, dated December 4, 1998. We appreciate your support for the Hanford Openness Workshops' (HOW) recommendations to the DOE Richland Operations Office

  17. http://www.hanford.gov/boards/hab/response/090.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tom Fitzsimmons Ms. Merilyn Reeves, Chair Hanford Advisory Board 723 The Parkway, Suite 200 Richland, Washington 99352 January 5, 1999 Dear Ms. Reeves: RE: Hanford Advisory Board Consensus Advice #90 dated December 4 1998. Thank you for your December 4, l998 letter to Assistant Secretary Owendoff, John Wagoner, and me regarding the Department of Energy's (USDOE's) Hanford tank waste treatment contract, and associated Tri-Party Agreement financing and funding considerations. I share the Board's

  18. http://www.hanford.gov/boards/hab/response/091.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Ms. Merilyn Reeves, Chair Hanford Advisory Board 723 The Parkway, Suite 200 Richland, Washington 99352 May 3, 1999 Dear Ms. Reeves: RE: Hanford Advisory Board Consensus Advice #91 dated February 12, 1999. Your letter of February 12 raises many issues that have long been of concern to Ecology and EPA. We share your concern that DOE move forward in characterizing wastes within tank 241-Z-361, and that it develop and approve a comprehensive, facility wide baseline for Plutonium Finishing Plant

  19. http://www.hanford.gov/boards/hab/response/092.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 From: Mike Wilson Ms. Merilyn Reeves, Chair Hanford Advisory Board 723 The Parkway, Suite 200 Richland, Washington 99352 April 29, 1999 Dear Ms. Reeves: RE: Hanford Advisory Board Consensus Advice #92. The Department of Ecology appreciates the Hanford Advisory Board's dedication to this important issue. We agree that the Board's recommendations are consistent with Tri-Party Agreement requirements. As outlined in the Tri-Party Agreement Community Relations Plan, Ecology continues to work toward

  20. http://www.hanford.gov/boards/hab/response/094.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 From: Chuck Clarke and Tom Fitzsimmons Ms. Merilyn Reeves, Chair Hanford Advisory Board 723 The Parkway, Suite 200 Richland, Washington 99352 May 4, 1999 Dear Ms. Reeves: Thank you for transmitting the Hanford Advisory Board's advice on the Richland Operations Office proposed Fiscal Year 2001 budget and integrated priority list. As always, we appreciate the degree of effort individual Board members and the Board as a whole has put into the annual budget advice. We believe the Board can be