National Library of Energy BETA

Sample records for attachment 2-data presentation

  1. Oak Ridge Reservation environmental report for 1992. Volume 2: Data presentation

    SciTech Connect (OSTI)

    Koncinski, W.S.

    1993-09-01

    The two volumes of this report present data and supporting narratives regarding the impact of the US Department of Energy`s (DOE`s) Oak Ridge Reservation (ORR) on its environs and the public during 1992. Volume 1 includes all narrative descriptions, summaries, and conclusions and is intended to be a ``stand-alone`` report for the reader who does not want to review in detail all of the 1992 data for the ORR. This volume (volume 2) includes the detailed data in formats that ensure all the environmental data are presented. Narratives are not included in Vol. 2.

  2. Trial Run of a Junction-Box Attachment Test for Use in Photovoltaic Module Qualification (Presentation)

    SciTech Connect (OSTI)

    Miller, D.; Deibert, S.; Wohlgemuth, J.

    2014-06-01

    Engineering robust adhesion of the junction-box (j-box) is a hurdle typically encountered by photovoltaic (PV) module manufacturers during product development and manufacturing process control. There are historical incidences of adverse effects (e.g., fires), caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp-heat', 'thermal-cycle', or 'creep' tests within the IEC qualification protocol is proposed to verify the basic robustness of the adhesion system. The details of the proposed test are described, in addition to a trial run of the test procedure. The described experiments examine 4 moisture-cured silicones, 4 foam tapes, and a hot-melt adhesive used in conjunction with glass, KPE, THV, and TPE substrates. For the purpose of validating the experiment, j-boxes were adhered to a substrate, loaded with a prescribed weight, and then subjected to aging. The replicate mock-modules were aged in an environmental chamber (at 85 deg C/85% relative humidity for 1000 hours; then 100 degrees C/<10% relative humidity for 200 hours) or fielded in Golden, Miami, and Phoenix for 1 year. Attachment strength tests, including pluck and shear test geometries, were also performed on smaller component specimens.

  3. Effect of particles attachment to multi-sized dust grains present in electrostatic sheaths of discharge plasmas

    SciTech Connect (OSTI)

    Zaham, B.; Tahraoui, A. Chekour, S.; Benlemdjaldi, D.

    2014-12-15

    The loss of electrons and ions due to their attachment to a Gauss-distributed sizes of dust grains present in electrostatic sheaths of discharge plasmas is investigated. A uni-dimensional, unmagnetized, and stationary multi-fluid model is proposed. Forces acting on the dust grain along with its charge are self-consistently calculated, within the limits of the orbit motion limited model. The dynamic analysis of dust grains shows that the contribution of the neutral drag force in the net force acting on the dust grain is negligible, whereas the contribution of the gravity force is found considerable only for micrometer particles. The dust grains trapping is only possible when the electrostatic force is balanced by the ion drag and the gravity forces. This trapping occurs for a limited radius interval of micrometer dust grains, which is around the most probable dust grain radius. The effect of electron temperature and ion density at the sheath edge is also discussed. It is shown that the attachment of particles reduces considerably the sheath thickness and induces dust grain deceleration. The increase of the lower limit as well as the upper limit of the dust radius reduces also the sheath thickness.

  4. Fenestration Attachments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    new windows for residential and commercial buildings. Attachments Energy Rating Council (AERC), National Fenestration Rating Council (NFRC), window coverings manufacturers, ...

  5. Window Attachments

    Energy Savers [EERE]

    ... shades Surface applied film Cellular shade Window quilt Seasonal film kit Louvered blinds Roller shades Solar screens Cellular shades Surface applied films Exterior attachments ...

  6. Attachment B

    Office of Environmental Management (EM)

    B HAZARDOUS WASTE PERMIT APPLICATION PART A Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 PERMIT ATTACHMENT B Page B-i of 52 ATTACHMENT B HAZARDOUS WASTE PERMIT APPLICATION PART A TABLE OF CONTENTS PART A - HAZARDOUS WASTE PERMIT APPLICATION ......................................................... 1 RCRA PART A APPLICATION CERTIFICATION

  7. Attachment E

    Office of Environmental Management (EM)

    E INSPECTION SCHEDULE, PROCESS AND FORMS Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 PERMIT ATTACHMENT E Page E-i ATTACHMENT E INSPECTION SCHEDULE, PROCESS AND FORMS TABLE OF CONTENTS Introduction ................................................................................................................................. 1 E-1 Inspection Schedule

  8. Attachment L

    Office of Environmental Management (EM)

    L WIPP GROUNDWATER DETECTION MONITORING PROGRAM PLAN Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT L Page L-i ATTACHMENT L WIPP GROUNDWATER DETECTION MONITORING PROGRAM PLAN TABLE OF CONTENTS L-1 Introduction ..................................................................................................................... 1 L-1a Geologic and Hydrologic

  9. Attachment N

    Office of Environmental Management (EM)

    N VOLATILE ORGANIC COMPOUND MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT N Page N-i ATTACHMENT N VOLATILE ORGANIC COMPOUND MONITORING PLAN TABLE OF CONTENTS N-1 Introduction ..................................................................................................................... 1 N-1a Background

  10. Attachment O

    Office of Environmental Management (EM)

    O WIPP MINE VENTILATION RATE MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit May 8, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit May 8, 2012 PERMIT ATTACHMENT O Page O-1 of 14 1 ATTACHMENT O 2 WIPP MINE VENTILATION RATE MONITORING PLAN 3 TABLE OF CONTENTS 4 O-1 Definitions ....................................................................................................................... 2 5 O-2 Objective

  11. ATTACHMENT J

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contract No. DE-AC02-07CH11358 Contract Modification No. 0145 Section J, Appendix A J-A-1 ATTACHMENT J.1 APPENDIX A ADVANCE UNDERSTANDINGS ON HUMAN RESOURCES Applicable to the...

  12. Attachment 4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reference Chart | Department of Energy 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart (1.84 MB) More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Microsoft Word - AL2008-05.doc

    1 of 6 High-Level Bases and Assumptions for the WTP Project Baseline 1. The

  13. Attachment K

    Office of Environmental Management (EM)

    SOLID WASTE MANAGEMENT UNIT (SWMU) AND AREA OF CONCERN (AOC) TABLES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT K Page K-i ATTACHMENT K SOLID WASTE MANAGEMENT UNIT (SWMU) AND AREA OF CONCERN (AOC) TABLES LIST OF TABLES Table Title Table K-1 Solid Waste Management Units (SWMUs) & Areas of Concern (AOCs) Requiring Corrective Action Table K-2 SWMUs & AOCs

  14. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC View of the Greenbook June 25, 2004 | Author(s): Bill Saphir | Download File: Saphir.ppt | ppt | 644 KB High Energy Physics Greenbook Presentation June 25, 2004 | Author(s): Rob Ryne | Download File: ryne.ppt | ppt | 481 KB (Accelerator Physics, Astrophysics, Theory) Nuclear Physics Greenbook Presentation June 25, 2004 | Author(s): Doug Olson | Download File: olson-np.ppt | ppt | 1.3 MB (Astrophysics, Nuclear Theory) ASCR Greenbook Presentation June 25, 2004 | Author(s): Phil Collela |

  15. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Adobe Acrobat PDF file A description of the Cray XE6 architecture. Presented by John Shalf, NERSC. Compiling-Cunningham.pdf | Adobe Acrobat PDF file An introduction to...

  16. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mixed Language Programming, including Library Usage across Language Boundaries June 24, 2004 ... High Energy Physics Greenbook Presentation June 25, 2004 | Author(s): Rob Ryne | ...

  17. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of performance between the SP and UCLA's own Appleseed cluster of G4 Macintosh computers will also be presented. Kernel and Application Code Performance for a Spectral...

  18. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Vadim Sokolov, Joshua Auld, Michael Hope, A flexible framework for developing integrated models of transportation systems using an agent-based approach, Procedia Computer Science, Volume 10, 2012, Pages 854-859 (link) TRACC RESEARCH Computational Fluid Dynamics Computational Structural Mechanics Transportation Systems Modeling Polaris Paris Home Presentations

  19. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ASCR Greenbook Presentation February 22, 2001 | Author(s): Mike Minkoff | Download File: Minkoff.greenbook-oascr2001.ppt | ppt | 47 KB BER Greenbook Presentation February 22, 2001 | Author(s): Doug Rotman | Download File: OBERFeb22Rotman.ppt | ppt | 5.5 MB BES Greenbook Presentation February 22, 2001 | Author(s): Theresa Windus | Download File: Windus.besgreenbook.ppt | ppt | 1.3 MB Draft OFES Contributions February 23, 2001 | Author(s): B. I. Cohen; A. Friedman; D. A. Spong | Download File:

  20. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Fortran-77 and Fortran-90: Porting Between PVP and MPP April 28, 1999 | Author(s): Majdi Baddourah | Presentation not available. This lecture will be an overview of where Fortran ...

  1. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... April 8, 1998 | Author(s): Jonathan Carter | Download File: jcarter.pdf | pdf | 339 KB In this presentation we show the various stages of converting a program from PVP to MPP. ...

  2. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Craig Tull: Present and Future Computing Requirements for Daya Bay November 27, 2012 | Author(s): Craig Tull (LBNL) | Download File: CraigTull20121127Dayabay.pdf | pdf | 11 MB...

  3. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Susan Gregurick (DOE) Download File: September-2012-BER-NERSC-Overview.pdf | pdf | 2.2 MB Harvey Wasserman Download File: NERSC-IntroHarvey.pdf | pdf | 1.9 MB Present and Future...

  4. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Presentations Sort by: Default | Name | Date (low-high) | Date (high-low) | Source | Category ASCR Requirements Gathering March 19, 2013 | Author(s): David Goodwin, DOE ASCR | Download File: ASCR-Requirements-Gathering.pdf | pdf | 207 KB FES Program Summary & Status March 19, 2013 | Author(s): John Mandrekas, DOE FES | Download File: FES-NERSCMandrekas032013Final.pdf | pdf | 13 MB FES Review Overview and Goals March 19, 2013 | Author(s): Richard A. Gerber | Download File:

  5. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Presentations Sort by: Default | Name | Date (low-high) | Date (high-low) | Source | Category Barbara Helland: NERSC-HEP Requirements Review November 27, 2012 | Author(s): Barbara Helland | Download File: Helland.pdf | pdf | 5.5 MB NERSC-HEP Requirements Review James Siegrist: Perspectives from High Energy Physics November 27, 2012 | Author(s): James Siegrist | Download File: Siegrist-HEP-Overview.pdf | pdf | 3.7 MB Perspectives from High Energy Physics Sudip Dosanjh: NERSC Role in

  6. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Presentations Sort by: Default | Name | Date (low-high) | Date (high-low) | Source | Category IBM Compiler Optimization Options June 4, 2002 | Author(s): M. Stewart | Download File: optarg.ppt | ppt | 53 KB All of the IBM supplied compilers produce unoptimized code by default. Specific optimization command line options must be supplied to the compilers in order for them to produce optimized code. In this talk, several of the more useful optimization options for the IBM Fortran, C,

  7. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Presentations Sort by: Default | Name | Date (low-high) | Date (high-low) | Source | Category NERSC Updates Status; current activities and projects Roadmap, future projects, and impact of potential continuing resolution September 17, 2007 | Author(s): Bill Kramer | Download File: Kramer-NERSCIntro-v2.ppt | ppt | 23 MB Download File: Kramer-NERSCIntro-v2.pdf | pdf | 13 MB HPSS Update September 17, 2007 | Author(s): Jason Hick | Download File: Hick-NUGHPSSUpdate.ppt | ppt | 1.2 MB

  8. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HENP Greenbook Presentation February 23, 2001 | Author(s): David Dean | Download File: Dean.nerschenp.ppt | ppt | 7.5 MB FES Greenbook Presentation February 23, 2001 | Author(s): Bas Braams | [File unavailable for download] Revisit Greenbook goals; synthesis and overall Greenbook Framework; work assignments February 23, 2001 | Author(s): Doug Rotman | Download File: Rotman.NERSCGreenbook.doc | doc | 22 KB Draft OFES Contributions February 23, 2001 | Author(s): B. I. Cohen; A. Friedman; D. A.

  9. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Presentations Sort by: Default | Name | Date (low-high) | Date (high-low) | Source | Category Requirements Reviews Overview Author(s): David Goodwin, ASCR | Meeting Goals and Process Author(s): Richard Gerber | Download File: Gerber-Overview.pdf | pdf | 1.4 MB Computing in Basic Energy Sciences Author(s): James Davenport, BES | Download File: DavenportNERSC-BES-10-8-2013.pdf | pdf | 12 MB NERSC Ten-Year Strategy Author(s): Sudip Dosanjh, NERSC | Download File: SudipDosanjh.pdf |

  10. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Presentations Sort by: Default | Name | Date (low-high) | Date (high-low) | Source | Category Perspectives from Washington February 22, 2001 | Author(s): Walt Polansky | Download File: Polansky.NUGMeeting2-01.ppt | ppt | 750 KB Status reports: IBM SP Phase 2 plans, NERSC-4 plans, NERSC-2 decommissioning February 22, 2001 | Author(s): Bill Kramer | Download File: Kramer.Status.Plans.Feb2001.ppt | ppt | 6.8 MB Goals for the next Greenbook February 22, 2001 | Author(s): Doug Rotman |

  11. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Presentations Sort by: Default | Name | Date (low-high) | Date (high-low) | Source | Category DOE Update June 12, 2006 | Author(s): Barbara Helland | Download File: Helland-DOE.ppt | ppt | 788 KB NERSC Status and Five Year Plan 2006-2010 June 12, 2006 | Author(s): Bill Kramer | Download File: KramerStatusUpdate.ppt | ppt | 2.6 MB NERSC Metrics June 12, 2006 | Author(s): Jonathan Carter | Download File: CarterMetrics.ppt | ppt | 839 KB NERSC Global Filesystem Future Directions

  12. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Presentations Sort by: Default | Name | Date (low-high) | Date (high-low) | Source | Category NERSC Accomplishments and Plans October 7, 2009 | Author(s): Kathy Yelick | Download File: YelickK.pdf | pdf | 34 MB Hopper, the new NERSC-6 System October 7, 2009 | Author(s): Jonathan Carter | Download File: CarterJ.pdf | pdf | 2.5 MB 2009 User Survey Results October 7, 2009 | Author(s): Francesca Verdier | Download File: VerdierF.pdf | pdf | 2.9 MB Requirements Gathering & BER

  13. PRESENT:

    U.S. Energy Information Administration (EIA) Indexed Site

    PUBLIC MEETING + + + + + FRIDAY NOVEMBER 14, 1997 + + + + + WASHINGTON, D.C. The Committee met in the Clark Room of the Capital Holiday Inn, 550 C Street, S.W., at 10:30 a.m., G. Campbell Watkins, Chair, presiding. PRESENT: G. CAMPBELL WATKINS, Chair DANIEL A. RELLES, Vice Chair DAVID R. BELLHOUSE R. SAMPRIT CHATTERJEE BRENDA G. COX CAROL A. GOTWAY CRAWFORD PHILIP HANSEN CALVIN KENT GRETA M. LJUNG ROY W. WHITMORE INVITED GUESTS: SEYMOUR SUDMAN RICHARD TABORS EIA STAFF PRESENT: JAY HAKES, EIA

  14. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ACTS Components (such as such as ScaLAPACK, TAU, SuperLU, and PETSc) and Case Studies of Their Use June 24, 2004 | Author(s): Osni Marques | URL: http://ipvideo.lbl.gov:8080/ramgen/Marques.rm Download File: NUG.ppt | ppt | 5.6 MB ASCR Greenbook Presentation June 25, 2004 | Author(s): Phil Collela | Download File: colella.ppt | ppt | 20 KB Applied Mathematics, Computer Science Basic Energy Sciences Greenbook Presentation June 25, 2004 | Author(s): Robert Harrison | Download File:

  15. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Susan Gregurick (DOE) Download File: September-2012-BER-NERSC-Overview.pdf | pdf | 2.2 MB Harvey Wasserman Download File: NERSC-IntroHarvey.pdf | pdf | 1.9 MB Present and Future Computing Requirements Author(s): Ruby Leung | Download File: Leung.pdf | pdf | 730 KB BER/NERSC Requirements Gathering Workshop September 11, 2012 | Author(s): Yukiko Sekine, DOE ASCR | Download File: YS-BER-NERSCWorkshopPresen2.pdf | pdf | 592 KB Case Study: Climate Change Simula2ons with the Community Earth System

  16. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Present and Future Computing Requirements for Computational Prediction of Protein-DNA Binding September 12, 2012 | Author(s): Mohammed AlQuraishi | Download File: AlQuraishi.pdf | pdf | 1 MB KBASE: Data and Modeling for Predictive Biology September 12, 2012 | Author(s): Tom Brettin and Shane Canon | Download File: KBaseBrettin.pdf | pdf | 5.9 MB NERSC Role in Biological and Environmental Research September 12, 2012 | Author(s): Kathy Yelick | Download File: NERSC-BER-Yelick.ppt | ppt | 35 MB

  17. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NUG 1996 NUG 1995 NUG 1994 ERSUG: July 11 - 12, 1994 (Rockville, Maryland) Presentations Agenda Minutes ERSUG/EXERSUG: Jan 12, 1994 (UCLA) NUGEX Elections Charter Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting and questions http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC,

  18. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Agenda Minutes NUG 1997 NUG 1996 NUG 1995 NUG 1994 NUGEX Elections Charter Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting and questions http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home » For Users » NERSC Users Group » Annual

  19. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Briefing on the NERSC III System April 27, 1999 | Author(s): Adrian Wong | [Presentation not available]. A technical description of the newly announced NERSC III system: what it will consist of, the phases of its delivery, and a discussion of how it will be used and managed. Both hardware and software will be discussed. An Introduction to PetSC April 27, 1999 | Author(s): Satish Balay, William Gropp, Lois Curfman McInnes, Barry Smith | Download File: petsc.ppt | ppt | 572 KB The development of

  20. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Comparing Cray Tasking and OpenMP June 7, 2000 | Author(s): Thomas M. DeBoni | Download File: OpenMPvsCrayDirectives.ppt | ppt | 56 KB This talk will provide an overview of the OpenMP standard, focusing on the scope of the specification. This will be followed by a comparison of Cray tasking directives with their OpenMP counterparts. Several examples will be presented that illustrate the capabilities (and limitations) of OpenMP. The talk will conclude with a brief discussion of mixing OpenMP with

  1. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November 12, 2001 Presentations Agenda NUG 2000 NUG 1999 NUG 1998 NUG 1997 NUG 1996 NUG 1995 NUG 1994 NUGEX Elections Charter Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting and questions http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home » For

  2. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC "Visualization Greenbook": Future Visualization Needs of the DOE Computational Science Community Hosted at NERSC October 1, 2002 | Author(s): Bernd Hamann, E. Wes Bethel, Horst Simon, Juan Meza | Download File: VisGreenFindings-LBNL-51699.pdf | pdf | 2.8 MB This report presents the findings and recommendations that emerged from a one-day workshop held at Lawrence Berkeley National Laboratory (LBNL) on June 5, 2002, in conjunction with the NERSC User Group (NUG) Meeting. IBM

  3. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November 18, 2002 Presentations Agenda NUG 2001 NUG 2000 NUG 1999 NUG 1998 NUG 1997 NUG 1996 NUG 1995 NUG 1994 NUGEX Elections Charter Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting and questions http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home

  4. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NUG 2012 Training Presentations NUG 2010 NUG 2009 NUG 2008 NUG 2007 NUG 2006 NUG 2005 NUG 2004 NUG 2003 NUG 2002 NUG 2001 NUG 2000 NUG 1999 NUG 1998 NUG 1997 NUG 1996 NUG 1995 NUG 1994 NUGEX Elections Charter Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting and questions

  5. Attachment C1

    Office of Environmental Management (EM)

    - Summary GHG Emissions Data FINAL Attachment C - Summary GHG Emissions Data FINAL Attachment C - Summary GHG Emissions Data FINAL (33.78 KB) More Documents & Publications Attachment C

    Summary GHG Emissions Data FINAL Attachment C Summary GHG Emissions Data FINAL Attachment-C-Summary-GHG-Emissions-Data-FINAL.xlsx (34.24 KB) More Documents & Publications Attachment C -

    C1 WASTE CHARACTERIZATION TESTING METHODS Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013

  6. Detector #2 Data Sheet - 88-Inch Cyclotron

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gamma Spec Lab‎ > ‎ Detector #2 Data Sheet

  7. Attachment N1

    Office of Environmental Management (EM)

    N1 HYDROGEN AND METHANE MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit ... ATTACHMENT N1 Page N1-i ATTACHMENT N1 HYDROGEN AND METHANE MONITORING PLAN TABLE OF ...

  8. Belt attachment and system

    DOE Patents [OSTI]

    Schneider, Abraham D.; Davidson, Erick M.

    2016-02-02

    Disclosed herein is a belt assembly including a flexible belt with an improved belt attachment. The belt attachment includes two crossbars spaced along the length of the belt. The crossbars retain bearings that allow predetermined movement in six degrees of freedom. The crossbars are connected by a rigid body that attaches to the bearings. Implements that are attached to the rigid body are simply supported but restrained in pitching rotation.

  9. Blade attachment assembly

    DOE Patents [OSTI]

    Garcia-Crespo, Andres Jose; Delvaux, John McConnell; Miller, Diane Patricia

    2016-05-03

    An assembly and method for affixing a turbomachine rotor blade to a rotor wheel are disclosed. In an embodiment, an adaptor member is provided disposed between the blade and the rotor wheel, the adaptor member including an adaptor attachment slot that is complementary to the blade attachment member, and an adaptor attachment member that is complementary to the rotor wheel attachment slot. A coverplate is provided, having a coverplate attachment member that is complementary to the rotor wheel attachment slot, and a hook for engaging the adaptor member. When assembled, the coverplate member matingly engages with the adaptor member, and retains the blade in the adaptor member, and the assembly in the rotor wheel.

  10. High Performance Window Attachments

    Broader source: Energy.gov (indexed) [DOE]

    Statement: * A wide range of residential window attachments are available, but they ... to model wide range of window coverings * Performed window coverings ...

  11. Attachment C4

    Office of Environmental Management (EM)

    C4 TRU MIXED WASTE CHARACTERIZATION USING ACCEPTABLE KNOWLEDGE Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 PERMIT ATTACHMENT C4 Page C4-i ATTACHMENT C4 TRU MIXED WASTE CHARACTERIZATION USING ACCEPTABLE KNOWLEDGE TABLE OF CONTENTS C4-1 Introduction ..................................................................................................................... 1 C4-2

  12. Attachment C6

    Office of Environmental Management (EM)

    C6 AUDIT AND SURVEILLANCE PROGRAM Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT C6 Page C6-i ATTACHMENT C6 AUDIT AND SURVEILLANCE PROGRAM TABLE OF CONTENTS C6-1 Introduction ..................................................................................................................... 1 C6-2 Audit Procedures

  13. Attachment G3

    Office of Environmental Management (EM)

    G3 RADIOLOGICAL SURVEYS TO INDICATE POTENTIAL HAZARDOUS WASTE RELEASES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT G3 Page G3-i ATTACHMENT G3 RADIOLOGICAL SURVEYS TO INDICATE POTENTIAL HAZARDOUS WASTE RELEASES TABLE OF CONTENTS G3-1 Purpose ........................................................................................................................... 1

  14. Attachment H1

    Office of Environmental Management (EM)

    H1 ACTIVE INSTITUTIONAL CONTROLS DURING POST-CLOSURE Waste Isolation Pilot Plant Hazardous Waste Permit November 1, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 1, 2012 PERMIT ATTACHMENT H1 Page H1-i ATTACHMENT H1 ACTIVE INSTITUTIONAL CONTROLS DURING POST-CLOSURE TABLE OF CONTENTS Introduction ................................................................................................................................. 1 H1.1 Active

  15. Attachment 3 of 5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Green Lease Policies and Procedures for Lease Acquisition (45.31 KB) More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Energy Efficiency in Separate Tenant Spaces - A Feasibility Study | Department of Energy

    2:

  16. Attachment C3

    Office of Environmental Management (EM)

    C3 QUALITY ASSURANCE OBJECTIVES AND DATA VALIDATION TECHNIQUES FOR WASTE CHARACTERIZATION METHODS Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT C3 Page C3-i ATTACHMENT C3 QUALITY ASSURANCE OBJECTIVES AND DATA VALIDATION TECHNIQUES FOR WASTE CHARACTERIZATION METHODS TABLE OF CONTENTS C3-1 Validation Methods

  17. Attachment C5

    Office of Environmental Management (EM)

    C5 QUALITY ASSURANCE PROJECT PLAN REQUIREMENTS Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 PERMIT ATTACHMENT C5 Page C5-i ATTACHMENT C5 QUALITY ASSURANCE PROJECT PLAN REQUIREMENTS TABLE OF CONTENTS C5-1 Quality Assurance Project Plans ...................................................................................... 1 C5-2 Document Review, Approval, and Control

  18. Attachment F2

    Office of Environmental Management (EM)

    F2 TRAINING COURSE AND QUALIFICATION CARD OUTLINES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT F2 Page F2-i ATTACHMENT F2 TRAINING COURSE AND QUALIFICATION CARD OUTLINES TABLE OF CONTENTS Course Outlines .......................................................................................................................... 1 GET-19X/GET-20X/GET-21X - General

  19. Attachment G2

    Office of Environmental Management (EM)

    G2 WASTE ISOLATION PILOT PLANT SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT G2 Page G2-i ATTACHMENT G2 WASTE ISOLATION PILOT PLANT SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT ADAPTED FROM: SAND96-1326/1 DISTRIBUTION UNLIMITED RELEASE CATEGORY UC-721 PRINTED AUGUST 1996 WASTE ISOLATION PILOT PLANT

  20. Attachment N1

    Office of Environmental Management (EM)

    N1 HYDROGEN AND METHANE MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit January 31, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit January 31, 2012 PERMIT ATTACHMENT N1 Page N1-i ATTACHMENT N1 HYDROGEN AND METHANE MONITORING PLAN TABLE OF CONTENTS N1-1 Introduction ..................................................................................................................... 1 N1-2 Parameters to be Analyzed and Monitoring Design

  1. Micromechanical die attachment surcharge

    DOE Patents [OSTI]

    Filter, William F.; Hohimer, John P.

    2002-01-01

    An attachment structure is disclosed for attaching a die to a supporting substrate without the use of adhesives or solder. The attachment structure, which can be formed by micromachining, functions purely mechanically in utilizing a plurality of shaped pillars (e.g. round, square or polygonal and solid, hollow or slotted) that are formed on one of the die or supporting substrate and which can be urged into contact with various types of mating structures including other pillars, a deformable layer or a plurality of receptacles that are formed on the other of the die or supporting substrate, thereby forming a friction bond that holds the die to the supporting substrate. The attachment structure can further include an alignment structure for precise positioning of the die and supporting substrate to facilitate mounting the die to the supporting substrate. The attachment structure has applications for mounting semiconductor die containing a microelectromechanical (MEM) device, a microsensor or an integrated circuit (IC), and can be used to form a multichip module. The attachment structure is particularly useful for mounting die containing released MEM devices since these devices are fragile and can otherwise be damaged or degraded by adhesive or solder mounting.

  2. Energy Savings from Window Attachments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... of window combinations with window attachments in typical residential buildings and in varied ... The most common and widely used types of attachments are window coverings ...

  3. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, G.L.

    1994-12-13

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion. 3 figures.

  4. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, Gary L. (Alpine, CA)

    1994-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion.

  5. Internal pipe attachment mechanism

    DOE Patents [OSTI]

    Bast, R.M.; Chesnut, D.A.; Henning, C.D.; Lennon, J.P.; Pastrnak, J.W.; Smith, J.A.

    1994-12-13

    An attachment mechanism is described for repairing or extending fluid carrying pipes, casings, conduits, etc. utilizing one-way motion of spring tempered fingers to provide a mechanical connection between the attachment mechanism and the pipe. The spring tempered fingers flex to permit insertion into a pipe to a desired insertion depth. The mechanical connection is accomplished by reversing the insertion motion and the mechanical leverage in the fingers forces them outwardly against the inner wall of the pipe. A seal is generated by crushing a sealing assembly by the action of setting the mechanical connection. 6 figures.

  6. Magnetically attached sputter targets

    DOE Patents [OSTI]

    Makowiecki, D.M.; McKernan, M.A.

    1994-02-15

    An improved method and assembly for attaching sputtering targets to cathode assemblies of sputtering systems which includes a magnetically permeable material is described. The magnetically permeable material is imbedded in a target base that is brazed, welded, or soldered to the sputter target, or is mechanically retained in the target material. Target attachment to the cathode is achieved by virtue of the permanent magnets and/or the pole pieces in the cathode assembly that create magnetic flux lines adjacent to the backing plate, which strongly attract the magnetically permeable material in the target assembly. 11 figures.

  7. Ladder attachment platform

    DOE Patents [OSTI]

    Swygert,; Richard, W [Springfield, SC

    2012-08-28

    A ladder attachment platform is provided that includes a base for attachment to a ladder that has first and second side rails and a plurality of rungs that extend between in a lateral direction. Also included is a user platform for having a user stand thereon that is carried by the base. The user platform may be positioned with respect to the ladder so that it is not located between a first plane that extends through the first side rail and is perpendicular to the lateral direction and a second plane that extends through the second side rail and is perpendicular to the lateral direction.

  8. Internal pipe attachment mechanism

    DOE Patents [OSTI]

    Bast, Richard M.; Chesnut, Dwayne A.; Henning, Carl D.; Lennon, Joseph P.; Pastrnak, John W.; Smith, Joseph A.

    1994-01-01

    An attachment mechanism for repairing or extending fluid carrying pipes, casings, conduits, etc. utilizing one-way motion of spring tempered fingers to provide a mechanical connection between the attachment mechanism and the pipe. The spring tempered fingers flex to permit insertion into a pipe to a desired insertion depth. The mechanical connection is accomplished by reversing the insertion motion and the mechanical leverage in the fingers forces them outwardly against the inner wall of the pipe. A seal is generated by crushing a sealing assembly by the action of setting the mechanical connection.

  9. Turbine nozzle attachment system

    DOE Patents [OSTI]

    Norton, Paul F.; Shaffer, James E.

    1995-01-01

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine.

  10. Turbine nozzle attachment system

    DOE Patents [OSTI]

    Norton, P.F.; Shaffer, J.E.

    1995-10-24

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and is attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine. 3 figs.

  11. Ceramic blade attachment system

    DOE Patents [OSTI]

    Frey, deceased, Gary A. (late of Poway, CA); Jimenez, Oscar D. (Escondia, CA)

    1996-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed therebetween. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. And, a pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade.

  12. Ceramic blade attachment system

    DOE Patents [OSTI]

    Frey, G.A.; Jimenez, O.D.

    1996-12-03

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed between them. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. A pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade. 4 figs.

  13. AGR-2 Data Qualification Interim Report

    SciTech Connect (OSTI)

    Michael L. Abbott

    2010-09-01

    Projects for the very high temperature reactor (VHTR) Technology Development Office program provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. The VHTR program established the NGNP Data Management and Analysis System (NDMAS) to manage and document VHTR data qualification, for storage of the data in a readily accessible electronic form, and to assist in the analysis and presentation of the data. This document gives the status of NDMAS processing and qualification of data associated with the initial reactor cycle (147A) of the second Advanced Gas Reactor (AGR-2) experiment which began on June 21, 2010. Because it is early in the AGR-2 experiment, data from only two AGR-2 data streams are reported on: Fuel Fabrication and Fuel Irradiation data. As of August 1, 2010, approximately 311,000 irradiation data records have been stored in NDMAS, and qualification tests are in progress. Preliminary information indicates that TC 2 in Capsule 2 failed prior to start of the experiment, and NDMAS testing has thus far identified only two invalid data values from the METSO data collection system Data from the Fission Product Monitoring System (FPMS) are not currently processed until after reactor cycle shutdown and have not yet been received. A description of the ATR operating conditions data associated with the AGR-2 experiment (e.g., power levels) are summarized in the AGR-1 data qualification report (INL/EXT-09-16460). Since ATR data are collected under ATR program data quality requirements (i.e., outside the VHTR program), the NGNP program and NDMAS do not take additional actions to qualify these data other than NDMAS capture testing. Data qualification of graphite characterization data collected under the Graphite Technology Development Project is reported in a separate status report (Hull 2010).

  14. Appendix TFIELD Attachment A: Attachment A: TFIELD-2014 Visualization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment A: TFIELD-2014 Visualization United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Compliance Recertification Application 2014 Attachment A: TFIELD-2014 Visualization This attachment contains figures for Appendix TFIELD-2014, related to the Culebra T-Field calibration process, performed as part of the 2009 Compliance Recertification Application (CRA-2009) Performance Assessment Baseline Calculation (PABC). These parameter inputs and

  15. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-01-10

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figures.

  16. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

  17. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

  18. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-07-11

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figs.

  19. Attachment A -- Deliverables.xls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4: Unrevised SFO Paragraphs Reissued Attachment 4: Unrevised SFO Paragraphs Reissued Unrevised SFO Paragraphs Reissued (35.68 KB) More Documents & Publications Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 1: Green Lease Policies and Procedures for Lease Acquisition 1

    B - J Deliverables Attachment A TOC Deliverables DE-AC27-08RV14800 SEC. Contract Section Description Action Timing TFP CO ESQ OPA IR/HR ORP MGR DCAA B B.2 Modify contract to obligate

  20. Attachment 6 - Government Property List

    National Nuclear Security Administration (NNSA)

    2 EQUIPMENT - HANDHELD COMPUTER - WIRELESS WHEEL LOAD SYSTEM 1 EQUIPMENT - HEAT STRESS MONITOR 5 EQUIPMENT - HOIST - PORTABLE 1 November 20, 2013 DE-SOL-0005982 Attachment 6...

  1. RFP Section L Attachment Templates

    Broader source: Energy.gov [DOE]

    On March 29,2010, six draft RFP Section L Attachment templates (Past Performance Information Questionnaire, Past Performance Questionnaire Cover Letter, Letter of Commitment, Past Performance Reference Information Form, ESH&Q Past Performance Information Form, and Resume Format) were distributed for Procurement Director (PD) and Head of Contracting Activity (HCA) review and comment. All comments received were considered and changes were made as appropriate. The final versions of the six aforementioned RFP Section L Attachment templates will be e-mailed directly to the Procurement Directors and made available in the STRIPES Library. For RFP's generated in STRIPES, the Section L Attachments should be identified in clause DOE-L-1033 and the file with each Attachment should be attached to the RFP.

  2. Attachment_5_Phoenix_PresentationQuick_Use_Guide.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  3. Attachment C: Optional AIP Provisions

    Broader source: Energy.gov [DOE]

    This attachment contains sample language for a number of optional provisions that sites may choose to include or not to include in their AIPs. Optional AIP provisions are not mandatory and the...

  4. Attachment 1 - Performance Work Statement

    National Nuclear Security Administration (NNSA)

    including TTR. Waste acceptance services will be performed at the NNSS and at waste generator sites. DE-SOL-0005982 Attachment 1 Page 1 2. Scope of Work 2.1 Requirement: The EPS...

  5. Attachment L-7c

    National Nuclear Security Administration (NNSA)

    c [Type here] VIETNAM MOBILIZATION PLAN DE-SOL-0008449 1.0 INTRODUCTION Based on the information presented below, the Statement of Work requirements relating to in- country deployments, and the Work Breakdown Structure (WBS) provided in Table 1, the Offeror shall develop a mobilization plan that describes its approach to a comprehensive Nuclear Smuggling Detection and Deterrence (NSDD) deployment involving Port of Cat Lai seaport in Vietnam. 2.0 REQUIREMENTS The Offeror shall provide a plan for

  6. Cladding Attachment Over Thick Exterior Insulating Sheathing

    SciTech Connect (OSTI)

    Baker, P.; Eng, P.; Lepage, R.

    2014-01-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1.What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2.Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3.What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

  7. Cladding Attachment Over Thick Exterior Insulating Sheathing

    SciTech Connect (OSTI)

    Baker, P.; Eng, P.; Lepage, R.

    2014-01-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1. What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2. Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3. What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

  8. ATTACHMENT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... to be Public 7 PII and includes, for example, first and last name, address, work telephone number, e-mail address, home telephone number, and general educational credentials. ...

  9. ATTACHMENT

    Broader source: Energy.gov (indexed) [DOE]

    Pages. Under Estimated Total Size, you will see the original file size and the 3. Click OK to accept the file size compression. compressed file size. U.S. Department of Energy,...

  10. Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation from Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments.

  11. ATTACHMENT F PAST PERFORMANCE QUESTIONNAIRE

    National Nuclear Security Administration (NNSA)

    SOURCE SELECTION INFORMATION - SEE FAR 3.104 (When Filled-In) 1 ATTACHMENT F PAST PERFORMANCE QUESTIONNAIRE Offerors are responsible for sending copies of the PAST PERFORMANCE QUESTIONNAIRE (SECTIONs A thru C) to references. Instructions to Offeror 1. For each reference submitted in your proposal, enter the required information in Section A. 2. Transmit the entire questionnaire to the identified Points of Contract (POCs) and place one copy of each Section A in your proposal submittal. NOTES:

  12. Attachment L-1 - Entity Certificates

    National Nuclear Security Administration (NNSA)

    3] Attachment L-1 1 ENTITY CERTIFICATE The offeror shall submit evidence to substantiate the authority of the person signing the offer and submit in Volume I of the proposal. CERTIFICATE I, _______________________________________________, certify that I have the signatory authority as the _________________________________________ to sign this offer/contract on behalf of said entity and to bind the entity by the authority of its governing body and within the scope of its powers. Affix the

  13. Attachment D: Mandatory Provisions if Applicable

    Broader source: Energy.gov [DOE]

    This attachment contains provisions that may be mandatory for an AIP if the State: (1) chooses to develop an emergency response program but does not want to use the suggested language in Attachment...

  14. Microsoft Word - Attachment I.doc

    Office of Environmental Management (EM)

    SCHEDULE RESERVED Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT I Page I-i ATTACHMENT I COMPLIANCE SCHEDULE RESERVED

  15. Microsoft Word - Attachment M.doc

    Office of Environmental Management (EM)

    M FIGURES RESERVED Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT M Page M-i ATTACHMENT M FIGURES RESERVED

  16. Microsoft Word - Attachment J.doc

    Office of Environmental Management (EM)

    Waste Isolation Pilot Plant Hazardous Waste Permit April 15, 2011 PERMIT ATTACHMENT J Page J-i ATTACHMENT J HAZARDOUS WASTE MANAGEMENT UNIT TABLES LIST OF TABLES Table Title...

  17. Attachment C … Waste Analysis Plan

    Office of Environmental Management (EM)

    Configurations | Department of Energy Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Docket No. EO-05-01: Attachment to the Operating Plan of Mirant Potomac River, LLC Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations (28.18 KB) More Documents & Publications Mirant Potomac, Alexandria, Virginia: Maximum Impacts Predicted by AERMOD-PRIME

  18. Attachments Energy Ratings Council | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachments Energy Ratings Council Attachments Energy Ratings Council Attachments Energy Ratings Council Lead Performer: Window Covering Manufacturing Association - New York, NY DOE Funding: $1,600,000 Project Term: October 1, 2014 - September 30, 2018 Funding Opportunity Announcement: Certification and Rating Attachments for Fenestration Technologies DE-FOA-001000-1504 Project Objective This project is to develop an independent rating, certification, labeling, and performance verification

  19. Shading, Films and Window Attachments Market Report

    Broader source: Energy.gov [DOE]

    Shading, Films and Window Attachments (SFWA) Market Report, March 13, 2016, from the Consortium for Building Energy Innovation.

  20. ATTACHMENT J.7 - APPENDIX G

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modification No. 0199 Contract No. DE-AC02-09CH11466 Section J - Appendix G J-G-1 ATTACHMENT J.7 APPENDIX G PURCHASING SYSTEM REQUIREMENTS Applicable to the Operation of PPPL Contract No. DE-AC02-09CH11466 Modification No. 0199 Contract No. DE-AC02-09CH11466 Section J - Appendix G J-G-2 Appendix G Purchasing System Requirements This Appendix and Clause I.146 "Contractor Purchasing System," sets forth DOE requirements applicable to the Purchasing System established under the Contract

  1. Split ring containment attachment device

    DOE Patents [OSTI]

    Sammel, Alfred G.

    1996-01-01

    A containment attachment device 10 for operatively connecting a glovebag 200 to plastic sheeting 100 covering hazardous material. The device 10 includes an inner split ring member 20 connected on one end 22 to a middle ring member 30 wherein the free end 21 of the split ring member 20 is inserted through a slit 101 in the plastic sheeting 100 to captively engage a generally circular portion of the plastic sheeting 100. A collar potion 41 having an outer ring portion 42 is provided with fastening means 51 for securing the device 10 together wherein the glovebag 200 is operatively connected to the collar portion 41.

  2. DNA attachment to support structures

    DOE Patents [OSTI]

    Balhorn, Rodney L.; Barry, Christopher H.

    2002-01-01

    Microscopic beads or other structures are attached to nucleic acids (DNA) using a terminal transferase. The transferase adds labeled dideoxy nucleotide bases to the ends of linear strands of DNA. The labels, such as the antigens digoxigenin and biotin, bind to the antibody compounds or other appropriate complementary ligands, which are bound to the microscopic beads or other support structures. The method does not require the synthesis of a synthetic oligonucleotide probe. The method can be used to tag or label DNA even when the DNA has an unknown sequence, has blunt ends, or is a very large fragment (e.g., >500 kilobase pairs).

  3. Attachment A -- Deliverables.xls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I Deliverables Attachment A TOC Deliverables DE-AC27-08RV14800 SEC. FAR/DEAR Clause Reference Description Action Timing TFP CO ESQ OPA IR/HR ORP MGR DCAA I.2 FAR 52.202-1 Definitions (JUL 2004) as supplemented by DEAR 952.202-1 (Mar 2002) Verify compliance As Required L I.3 FAR 52.203-3 Gratuities (APR 1984) Verify compliance As Required L I.4 FAR 52.203-5 Covenant Against Contingent Fees (APR 1984) Verify compliance As Required L I.5 FAR 52.203-6 Restrictions on Subcontractor Sales to the

  4. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment O

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    O DE-AC36-08GO28308 Modification M1033 Attachment O

  5. Methane production by attached film

    DOE Patents [OSTI]

    Jewell, William J.

    1981-01-01

    A method for purifying wastewater of biodegradable organics by converting the organics to methane and carbon dioxide gases is disclosed, characterized by the use of an anaerobic attached film expanded bed reactor for the reaction process. Dilute organic waste material is initially seeded with a heterogeneous anaerobic bacteria population including a methane-producing bacteria. The seeded organic waste material is introduced into the bottom of the expanded bed reactor which includes a particulate support media coated with a polysaccharide film. A low-velocity upward flow of the organic waste material is established through the bed during which the attached bacterial film reacts with the organic material to produce methane and carbon dioxide gases, purified water, and a small amount of residual effluent material. The residual effluent material is filtered by the film as it flows upwardly through the reactor bed. In a preferred embodiment, partially treated effluent material is recycled from the top of the bed to the bottom of the bed for further treatment. The methane and carbon dioxide gases are then separated from the residual effluent material and purified water.

  6. Microsoft Word - Policy Flash 2010-77 Attachment | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 Attachment Microsoft Word - Policy Flash 2010-77 Attachment Microsoft Word - Policy Flash 2010-77 Attachment More Documents & Publications Microsoft Word - Policy Flash 2010-78...

  7. Microsoft Word - Attachment 3 Recovery Act notification | Department...

    Energy Savers [EERE]

    Microsoft Word - Attachment 3 Recovery Act notification Microsoft Word - Attachment 3 Recovery Act notification More Documents & Publications Microsoft Word - Attachment 3 Recovery...

  8. Microsoft Word - Policy Flash 2010-81 Attachment 1 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 More Documents & Publications Microsoft Word - Policy Flash...

  9. Attached is Policy Flash 2013-44 Acquisition Guide- Allowability...

    Energy Savers [EERE]

    Attached is Policy Flash 2013-44 Acquisition Guide- Allowability of Incurred Costs Attached is Policy Flash 2013-44 Acquisition Guide- Allowability of Incurred Costs Attached is...

  10. Attachment FY2011-75 OPAM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OPAM Attachment FY2011-75 OPAM Federal Supply Schedules Attachment FY2011-75 OPAM More Documents & Publications Chapter 8 - Required Sources of Supplies and Services Attachment...

  11. ATTACHMENT J.3 - APPENDIX C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    99 Contract No.: DE-AC02-09CH11466 Section J - Appendix C J-C-1 ATTACHMENT J.3 APPENDIX C SPECIAL FINANCIAL INSTITUTION ACCOUNT AGREEMENT Applicable to the Operation of PPPL Contract No. DE-AC02-09CH11466 Modification No. 0199 Contract No.: DE-AC02-09CH11466 Section J - Appendix C J-C-2 Modification N o: 0 199 Contract N o: D E---AC02---09CH11466 Section J --- A ppendix C Information c ontained i n t his d ocument i s r estricted. C ontact P PPL v ia e mail--- j delooper@pppl.gov t o r equest a

  12. al99-06attachment.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    attachment.doc&0; al99-06attachment.doc&0; PDF icon al99-06attachment.doc&0; More Documents & Publications Microsoft Word - AL2000-05Attachment.doc Microsoft Word - NSRC...

  13. Microsoft Word - Attachment J-4 Legal Management Plan.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4-1 ATTACHMENT J.4. LEGAL MANAGEMENT

  14. AttachmentFlash_2010-55.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AttachmentFlash2010-55.pdf More Documents & Publications AttachmentFlash2010-66.pdf AttachmentFlash2010-73(3).pdf AttachmentFlash2010-33(2).pdf...

  15. Remedial action plan and site design for stabilization of the inactive uranium processing site at Naturita, Colorado. Appendix B of Attachment 3: Groundwater hydrology report, Attachment 4: Water resources protection strategy, Final

    SciTech Connect (OSTI)

    Not Available

    1994-03-01

    Attachment 3 Groundwater Hydrology Report describes the hydrogeology, water quality, and water resources at the processing site and Dry Flats disposal site. The Hydrological Services calculations contained in Appendix A of Attachment 3, are presented in a separate report. Attachment 4 Water Resources Protection Strategy describes how the remedial action will be in compliance with the proposed EPA groundwater standards.

  16. Building America Expert Meeting: Cladding Attachment Over Exterior...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Expert Meeting: Cladding Attachment Over Exterior Insulation Building America Expert Meeting: Cladding Attachment Over Exterior Insulation Building Science...

  17. Bonneville Power Administration Attachment P Oversupply Management...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    reduced generation in order to meet the Transmission Customers' schedules. The Oversupply Management Protocol will apply as follows: 1. The term of this attachment is March 31,...

  18. Introducing the Attachments Energy Ratings Council

    Broader source: Energy.gov [DOE]

    In collaboration with the U.S. Department of Energy (DOE), the Window Covering Manufacturers Association (WCMA) has launched the Attachments Energy Ratings Council (AERC).

  19. Cladding Attachment Over Thick Exterior Rigid Insulation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Double Bending Linear (10 Cantilever) Linear (10 Double Bending) Cladding Attachment ... Compression Strut Function of fastener tension and insulation compression Measured ...

  20. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment K

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    K DE-AC36-08GO28308 Modification M1033 Attachment K Diversity Plan Diversity Plan CY2014 is hereby incorporated as Attachment K of the contract

  1. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment C

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    C DE-AC36-08GO28308 Modification M1033 Attachment C Small Business Subcontracting Plan

  2. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment S

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    S DE-AC36-08GO28308 Modification M1033 Attachment S Human Resources Compensation Plan

  3. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment T

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    T DE-AC36-08GO28308 Modification M1033 Attachment T Human Resources Workforce Plan

  4. Microsoft Word - Attachment F1.doc

    Office of Environmental Management (EM)

    F1 RCRA HAZARDOUS WASTE MANAGEMENT JOB TITLES AND DESCRIPTIONS Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT F1 Page F1-i ATTACHMENT F1 RCRA HAZARDOUS WASTE MANAGEMENT JOB TITLES AND DESCRIPTIONS TABLE OF CONTENTS Job

  5. Nuclear reactor fuel rod attachment system

    DOE Patents [OSTI]

    Not Available

    1980-09-17

    A reusable system is described for removably attaching a nuclear reactor fuel rod to a support member. A locking cap is secured to the fuel rod and a locking strip is fastened to the support member. The locking cap has two opposing fingers shaped to form a socket having a body portion. The locking strip has an extension shaped to rigidly attach to the socket's body portion. The locking cap's fingers are resiliently deflectable. For attachment, the locking cap is longitudinally pushed onto the locking strip causing the extension to temporarily deflect open the fingers to engage the socket's body portion. For removal, the process is reversed.

  6. Workshop Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Workshop Presentations Large Scale Computing and Storage Requirements for Fusion Energy Sciences An FES ASCR NERSC Workshop August 3-4, 2010 Sort by: Default | ...

  7. ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT Site: Federal or Contractor Program: Name: ____________________________________________ Title:______________________________________________ Organization:_______________________________________ Address: __________________________________________ Bldg and Room Number _____________________________ Phone Number __________________ E-Mail ________________________________ Years of Records Management experience? Length of time in current position? Training?

  8. EXHIBIT G7.0 Attachment 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    G7.0 Attachment 2 32014 Page 1 SUBCONTRACTOR CYBER SECURITY PLAN Vendor Name (if Applicable): Subcontract No. PR- Ex. G dated: XXXXXX Rev. No.: 7 Pursuant to the requirements in...

  9. Microsoft Word - Attachment coversheet.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HANFORD MISSION SUPPORT CONTRACT ADVANCE UNDERSTANDING ON COST REVISED DECEMBER 31, 2014 Mission Support Contract Contract Number DE-AC06-09RL14728 Attachment J, Section J.8...

  10. River Corridor Closure Contract Section J, Attachment...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Contract No. DE-AC06-05RL14655 A000 1 ATTACHMENT J-12 GOVERNMENT-FURNISHED SERVICES AND INFORMATION (GFSI) GFSI Item Scope Description GFSI Description C.4 Hanford Site...

  11. Appendix DATA Attachment A: WIPP Borehole Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment A: WIPP Borehole Update Table of Contents DATA-A-1.0 WIPP Boreholes DATA-A-2.0 Individual Well Reports ...

  12. Microsoft Word - Attachment G1.doc

    Office of Environmental Management (EM)

    DETAILED DESIGN REPORT FOR AN OPERATION PHASE PANEL CLOSURE SYSTEM Adapted from DOE/WIPP 96-2150 Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G1 Page G1-i ATTACHMENT G1 DETAILED DESIGN REPORT FOR AN OPERATION PHASE PANEL CLOSURE SYSTEM TABLE OF CONTENTS Executive Summary

  13. Microsoft Word - Attachment J.doc

    Office of Environmental Management (EM)

    UNIT TABLES Waste Isolation Pilot Plant Hazardous Waste Permit April 15, 2011 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit April 15, 2011 PERMIT ATTACHMENT J Page J-i ATTACHMENT J HAZARDOUS WASTE MANAGEMENT UNIT TABLES LIST OF TABLES Table Title Table J-1 Waste Handling Building (WHB) Container Storage Unit Table J-2 Parking Area Container Storage Unit Table J-3 Underground Hazardous Waste Disposal Units Waste Isolation Pilot Plant Hazardous Waste Permit

  14. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, James M.; Luna, Daniel A.; Gwinn, Kenneth W.

    1997-01-01

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening.

  15. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, James M.; Luna, Daniel A.; Gwinn, Kenneth W.

    1998-01-01

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening.

  16. Microsoft Word - Policy Flash 2010-81 Attachment 2 | Department...

    Office of Environmental Management (EM)

    81 Attachment 2 Microsoft Word - Policy Flash 2010-81 Attachment 2 Microsoft Word - Policy Flash 2010-81 Attachment 2 More Documents & Publications ATTACHMENTFLASH2010.81(2)-OPAM...

  17. Microsoft Word - Policy Flash 2011-2 Attachment 1 | Department...

    Energy Savers [EERE]

    Microsoft Word - Policy Flash 2011-2 Attachment 1 Microsoft Word - Policy Flash 2011-2 Attachment 1 Microsoft Word - Policy Flash 2011-2 Attachment 1 More Documents & Publications...

  18. Microsoft Word - Policy Flash 2010-81 Attachment 1 | Department...

    Energy Savers [EERE]

    Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 More Documents &...

  19. Microsoft Word - Policy Flash 2010-67 Attachment 1 | Department...

    Office of Environmental Management (EM)

    67 Attachment 1 Microsoft Word - Policy Flash 2010-67 Attachment 1 Microsoft Word - Policy Flash 2010-67 Attachment 1 More Documents & Publications Acquisition Letter 2009-03...

  20. Attachment C - Summary GHG Emissions Data FINAL | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - Summary GHG Emissions Data FINAL Attachment C - Summary GHG Emissions Data FINAL Attachment C - Summary GHG Emissions Data FINAL (33.78 KB) More Documents & Publications Attachment C

  1. Attachment C Summary GHG Emissions Data FINAL | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summary GHG Emissions Data FINAL Attachment C Summary GHG Emissions Data FINAL Attachment-C-Summary-GHG-Emissions-Data-FINAL.xlsx (34.24 KB) More Documents & Publications Attachment C -

  2. Attachment FY2011-83 OPAM | Department of Energy

    Office of Environmental Management (EM)

    3 OPAM Attachment FY2011-83 OPAM Federal Supply Schedules Attachment FY2011-83 OPAM More Documents & Publications Chapter 8 - Required Sources of Supplies and Services Attachment...

  3. Presentation Timer

    Energy Science and Technology Software Center (OSTI)

    2010-06-23

    Abstract Conferences and Meetings feature many presentations on a tight schedule. The Session Timer system provides an electronic display for showing the remaining time in a presentation. It provides continuous feedback so the speaker can judge the pace throughout a presentation. The timer automates the job so the session chairman does not have to awkwardly interrupt the speaker.

  4. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment M

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    M DE-AC36-08GO28308 Modification M1033 Attachment M Equal Opportunity Program Incorporated by Reference In Modification M004

  5. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment N

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    N DE-AC36-08GO28308 Modification M1033 Attachment N Supplemental Requirements To Laws, Regulations, And Doe Directives

  6. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachments H

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    H DE-AC36-08GO28308 Modification M1033 Attachment H Performance Guarantee Agreement Incorporated by Reference In Modification M004

  7. DE-SOL-0008449 Attachment L-7c

    National Nuclear Security Administration (NNSA)

    DE-SOL-0008449 Attachment L-7c [Type here] VIETNAM MOBILIZATION PLAN DE-SOL-0008449 1.0 INTRODUCTION Based on the information presented below, the Statement of Work requirements relating to in- country deployments, and the Work Breakdown Structure (WBS) provided in Table 1, the Offeror shall develop a mobilization plan that describes its approach to a comprehensive Nuclear Smuggling Detection and Deterrence (NSDD) deployment involving Port of Cat Lai seaport in Vietnam. 2.0 REQUIREMENTS The

  8. Apparatus for attaching a cleaning tool to a robotic manipulator...

    Office of Scientific and Technical Information (OSTI)

    Apparatus for attaching a cleaning tool to a robotic manipulator Title: Apparatus for attaching a cleaning tool to a robotic manipulator This invention is comprised of an apparatus ...

  9. Apparatus for attaching a cleaning tool to a robotic manipulator...

    Office of Scientific and Technical Information (OSTI)

    Apparatus for attaching a cleaning tool to a robotic manipulator Title: Apparatus for attaching a cleaning tool to a robotic manipulator You are accessing a document from the ...

  10. Attachment 3: Instructions for Use of Green Lease Solicitation...

    Energy Savers [EERE]

    Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart...

  11. Attachment 2: Solicitation for Offers with New and Revised Green...

    Energy Savers [EERE]

    Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text PDF icon Solicitation for...

  12. Attachment 1: Green Lease Policies and Procedures for Lease Acquisitio...

    Energy Savers [EERE]

    Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition PDF icon Green Lease Policies and...

  13. Collimator with attachment mechanism and system (Patent) | DOEPatents

    Office of Scientific and Technical Information (OSTI)

    Data Explorer Search Results Collimator with attachment mechanism and system Title: Collimator with attachment mechanism and system A self-aligning collimator for a radiation ...

  14. Property:NEPA ApplicationAttachments | Open Energy Information

    Open Energy Info (EERE)

    ApplicationAttachments Jump to: navigation, search Property Name NEPA ApplicationAttachments Property Type Page Description FONSI files for NEPA Docs. For example: Cover letters,...

  15. Workshop Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agenda Presentations Logistics Reference Materials Participants Organizing Committee Case Study Worksheets High Energy Physics (HEP) Nuclear Physics (NP) Overview Published Reports Case Study FAQs NERSC HPC Achievement Awards Share Your Research User Submitted Research Citations NERSC Citations Home » Science at NERSC » HPC Requirements Reviews » Requirements Reviews: Target 2014 » Fusion Energy Sciences (FES) » Presentations Workshop Presentations Large Scale Computing and Storage

  16. Workshop Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High Energy Physics (HEP) Agenda Presentations Reference Materials Participants Organizing Committee Nuclear Physics (NP) Overview Published Reports Case Study FAQs NERSC HPC Achievement Awards Share Your Research User Submitted Research Citations NERSC Citations Home » Science at NERSC » HPC Requirements Reviews » Requirements Reviews: Target 2014 » High Energy Physics (HEP) » Presentations Workshop Presentations Sort by: Default | Name | Date (low-high) | Date (high-low) Advanced

  17. PRESENTATION TITLE

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydroelectric Design Center "Leaders in Hydropower Engineering" 12 April 2016 Presentation ... Atlanta, GA BUILDING STRONG HYDROELECTRIC DESIGN CENTER 2 Items for Discussion ...

  18. Workshop Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High Energy Physics (HEP) Agenda Presentations Reference Materials Participants Organizing Committee Nuclear Physics (NP) Overview Published Reports Case Study FAQs NERSC HPC ...

  19. Workshop Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agenda Presentations Logistics Reference Materials Participants Organizing Committee Case Study Worksheets High Energy Physics (HEP) Nuclear Physics (NP) Overview Published Reports ...

  20. PRESENTATION TITLE

    Broader source: Energy.gov (indexed) [DOE]

    Center "Leaders in Hydropower Engineering" 11 March 2013 Presentation for Southeastern Federal Power Alliance Steven R. Miles, PE, PMP Director, HDC BUILDING STRONG ...

  1. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment J

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    J DE-AC36-08GO28308 Modification M1033 Attachment J Performance Evaluation And Measurement Plan FY 2015 Performance Evaluation And Measurement Plan dated May 11, 2015, Rev 4, is hereby incorporated into this contract by reference as Section J, Attachment J

  2. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment L

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    L DE-AC36-08GO28308 Modification M1033 Attachment L Employee Concerns Program (ECP) Implementation Plan The Employee Concerns Program Plan, dated January 22, 2015, is hereby incorporated into this contract by reference as Section J, Attachment L

  3. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment P

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    P DE-AC36-08GO28308 Modification M1033 Attachment P Five Year Strategic Plan NREL's Five-Year Plan (FY15-FY19), dated October 23, 2014, Rev 2, is hereby incorporated into this contract by reference as Section J, Attachment P

  4. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment Q

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Q DE-AC36-08GO28308 Modification M1033 Attachment Q Organizational Conflict Of Interest Management Plan Organizational Conflicts of Interest Management Plan and Implementation Program, Volumes I and II, dated October 6, 2014, are hereby incorporated into this contract by reference as Section J, Attachment Q

  5. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment R

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    R DE-AC36-08GO28308 Modification M1033 Attachment R Organizational Conflict Of Interest Implementation Program Organizational Conflicts of Interest Management Plan and Implementation Program, Volumes I and II, dated October 6, 2014, are hereby incorporated into this contract by reference as Section J, Attachment R

  6. Nuclear reactor fuel rod attachment system

    DOE Patents [OSTI]

    Christiansen, David W. (Kennewick, WA)

    1982-01-01

    A reusable system for removably attaching a nuclear reactor fuel rod (12) to a support member (14). A locking cap (22) is secured to the fuel rod (12) and a locking strip (24) is fastened to the support member (14). The locking cap (22) has two opposing fingers (24a and 24b) shaped to form a socket having a body portion (26). The locking strip has an extension (36) shaped to rigidly attach to the socket's body portion (26). The locking cap's fingers are resiliently deflectable. For attachment, the locking cap (22) is longitudinally pushed onto the locking strip (24) causing the extension (36) to temporarily deflect open the fingers (24a and 24b) to engage the socket's body portion (26). For removal, the process is reversed.

  7. Workshop Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agenda Presentations Logistics Reference Materials Participants Organizing Committee Biological and Environmental Science (BER) Fusion Energy Sciences (FES) High Energy Physics (HEP) Nuclear Physics (NP) Overview Published Reports Case Study FAQs NERSC HPC Achievement Awards Share Your Research User Submitted Research Citations NERSC Citations Home » Science at NERSC » HPC Requirements Reviews » Requirements Reviews: Target 2014 » Basic Energy Sciences (BES) » Presentations Workshop

  8. Workshop Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Workshop Presentations Large Scale Computing and Storage Requirements for Advanced Scientific Computing Research An ASCR / NERSC Workshop January 5-6, 2011 Sort by: Default | Name | Date (low-high) | Date (high-low) Welcome, introductions, workshop goals, charge to committee January 5, 2011 | Author(s): Yukiko Sekine | Workshop outline, logistics, format January 5, 2011 | Author(s): Harvey Wasserman | ASCR Program Office Research Directions January 5, 2011 | Author(s): Karen Pao |

  9. Workshop Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Workshop Presentations Large Scale Computing and Storage Requirements for Fusion Energy Sciences An FES / ASCR / NERSC Workshop August 3-4, 2010 Sort by: Default | Name | Date (low-high) | Date (high-low) FES/NERSC Requirements Gathering Workshop August 3, 2010 | Author(s): Yukiko Sekine | Workshop Goals & Process: Large Scale Computing and Storage Requirements for Fusion Energy Sciences August 3, 2010 | Author(s): Harvey Wasserman | FES Overview August 3, 2010 | Author(s):

  10. Workshop Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Workshop Presentations Sort by: Default | Name | Date (low-high) | Date (high-low) Workshop Goals/Overview November 12, 2009 | Author(s): Yukiko Sekine | Workshop Logistics November 12, 2009 | Author(s): Harvey Wasserman | DOE HEP Overview November 12, 2009 | Author(s): Amber Boehnlein | NERSC Role in High Energy Physics Research November 12, 2009 | Author(s): Kathy Yelick | Community Petascale Project for Accelerator Science and Simulation (ComPASS) November 12, 2009 | Author(s):

  11. Workshop Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Workshop Presentations Large Scale Computing and Storage Requirements for Basic Energy Sciences An BES / ASCR / NERSC Workshop February 9-10, 2010 Sort by: Default | Name | Date (low-high) | Date (high-low) BES/NERSC Requirements Gathering Workshop, Workshop Goals February 9, 2010 | Author(s): Yukiko Sekine | Workshop outline, logistics, format, procedures February 9, 2010 | Author(s): Richard Gerber | BES Program Office Research Directions February 9, 2010 | Author(s): Mark

  12. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, J.M.; Luna, D.A.; Gwinn, K.W.

    1997-11-18

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening. 22 figs.

  13. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, J.M.; Luna, D.A.; Gwinn, K.W.

    1998-12-08

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening. 22 figs.

  14. Workshop Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Workshop Presentations Sort by: Default | Name | Date (low-high) | Date (high-low) Workshop Goals/Overview May 7, 2009 | Author(s): Yukiko Sekine | Workshop Logistics May 7, 2009 | Author(s): Harvey Wasserman | BER Overview May 7, 2009 | Author(s): David Thomassen | NERSC Overview May 7, 2009 | Author(s): Kathy Yelick | CCSM and Earth System Model May 7, 2009 | Author(s): Lawrence Buja, John Drake, Michael Wehner | Role of Climate System Noise in Climate Simulations May 7, 2009 |

  15. Annual Report Outline (IDIQ Attachment J-10) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report Outline (IDIQ Attachment J-10) Annual Report Outline (IDIQ Attachment J-10) Document offers an annual report outline sample for an energy savings performance contract. Download the annual report outline. (48.62 KB) More Documents & Publications Post-Installation Report Outline (IDIQ Attachment J-9) Measurement and Verification Plan and Savings Calculations Methods Outline (IDIQ Attachment J-8) ESPC Task Order Financial Schedules (IDIQ Attachment J-6

  16. Meeting and Presentation Materials

    Office of Environmental Management (EM)

    Quality Assurance Initiatives Original (Forecast) & Completion Date Basic QA principles, ... six month period of time (see attachment-Project Action Plan): DISTRIBUTION James A. ...

  17. Presentation Title

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Validation Methodology and Results Jeff Roche Presented at the 2013 Sandia PV Performance Modeling Workshop Santa Clara, CA. May 1-2, 2013 Published by Sandia National Laboratories with the Permission of the Author 2 © 2013 SunPower Corporation Why Validation is Important * To prove that you can accurately model across a wide range of products and geographical locations * Performance prediction key input in project finance models - Proven accuracy builds internal and investor confidence in

  18. Presentation Title

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PVSim - SunPower's PV Simulation Tool Ben Bourne Presented at the 2013 Sandia PV Performance Modeling Workshop Santa Clara, CA. May 1-2, 2013 Published by Sandia National Laboratories with the Permission of the Author 2 © 2013 SunPower Corporation Why SunPower Maintains an In-House Tool SunPower systems are investments * Customers need to know how much power and energy their system will produce over time * SunPower needs to know how to price these systems * SunPower needs to be able to

  19. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment G

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    G DE-AC36-08GO28308 Modification M1033 Attachment G Sensitive Foreign Nations Control In accordance with the Clause I.92, Sensitive Foreign Nations Controls, this Attachment sets forth the requirements the contractor shall comply with under this contract. (Reference DOE Order 142.3, or superseding directives.) Foreign National access to DOE sites, programs, information and technologies will be approved provided the access is needed to support the program objectives of DOE and/or objectives of

  20. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment I

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    I DE-AC36-08GO28308 Modification M1033 Attachment I Subcontracts, Purchase Orders And Other Actions Requiring DOE Review And Approval And Other Agreements Between The Parties This Attachment, implementing the Article entitled Contractor Purchasing System, sets forth the requirements for DOE's approval under the prime contract for the operation of the National Renewable Energy Laboratory. Subcontracts not binding on DOE Subcontracts and purchase orders shall be made in the name of Alliance, shall

  1. AGR-2 Data Qualification Report for ATR Cycle 154B

    SciTech Connect (OSTI)

    Binh Pham; Jeff Einerson

    2014-01-01

    This report provides the data qualification status of Advanced Gas Reactor-2 (AGR-2) fuel irradiation experimental data from Advanced Test Reactor (ATR) Cycle 154B as recorded in the Nuclear Data Management and Analysis System (NDMAS). This is the last cycle of AGR-2 irradiation, as the test train was pulled from the ATR core during the outage portion of ATR Cycle 155A. The AGR-2 data streams addressed in this report include thermocouple (TC) temperatures, sweep gas data (flow rates including new Fission Product Monitoring (FPM) downstream flows from Fission Product Monitoring System (FPMS) detectors, pressure, and moisture content), and FPMS data (release rates and release-to-birth rate ratios [R/Bs]) for each of the six capsules in the AGR-2 experiment. The final data qualification status for these data streams is determined by a Data Review Committee (DRC) comprised of AGR technical leads, Sitewide Quality Assurance (QA), and NDMAS analysts. The Data Review Committee reviewed the data acquisition process, considered whether the data met the requirements for data collection as specified in QA-approved Very High Temperature Reactor (VHTR) data collection plans, examined the results of NDMAS data testing and statistical analyses, and confirmed the qualification status of the data as given in this report.

  2. Methods of attaching erosion-resistant nonmetallic panels

    SciTech Connect (OSTI)

    Girzhel, A.M.

    1984-01-01

    Attachment methods for panels of wear-resistant nonmetallic materials, e.g. cast stone and slag, devitrified slag, and erosion-resistant and heat-resistant concretes to protect hopper, chute, and trough structures at metallurgical and coal industries have been investigated. Attachment methods can be divided into two groups, attachment by adhesives and by mechanical attachment. A new method of mechanical attachment, considered to be much superior to adhesive attachment, provides for reliable fastening without damage to the protected metal structure. Various panel designs may be used depending on the operating conditions.

  3. EECBG SEP Attachment 1 - Process metric list

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10-07B/SEP 10-006A Attachment 1: Process Metrics List Metric Area Metric Primary or Optional Metric Item(s) to Report On 1. Building Retrofits 1a. Buildings retrofitted, by sector Number of buildings retrofitted Square footage of buildings retrofitted 1b. Energy management systems installed, by sector Number of energy management systems installed Square footage of buildings under management 1c. Building roofs retrofitted, by sector Number of building roofs retrofitted Square footage of building

  4. Attachment FY2011-55 OPAM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1, Summary of Small Business Administration and Department of Energy Partnership Agreement Reference: FAR 19.8 Overview Recently, the Secretary and the Administrator of the Small Business Administration (SBA) executed a Partnership Agreement to expedite the award of requirements pursuant to section 8(a) of the Small Business Act. It will remain in effect through September 30, 2012. A copy is attached. This section discusses the effects of that Partnership Agreement on the way Department of

  5. Nevada Test Site Environmental Report 2008 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy A. Wills

    2009-09-01

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2008 (National Security Technologies, LLC [NSTec], 2009a). Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  6. Nevada Test Site Environmental Report 2009, Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills, ed.

    2010-09-13

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2009. Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  7. Attachment FY2011-06 OPAM | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    SUMMARY OF PUBLIC LAW 111-240, THE SMALL BUSINESS JOBS ACT OF 2010 Attachment FY2011-06 OPAM More Documents & Publications Attachment FY2011-28 OPAM Chapter 19 - Small Business...

  8. Attachment FY2011-9 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment FY2011-9 Attachment FY2011-9 FFRDC Determination for a Contract Competition More Documents & Publications Policy Flash 2013-30 Acquisition Letter on Acquisition Planning...

  9. Attachment FY2011-12 | Department of Energy

    Office of Environmental Management (EM)

    2 Attachment FY2011-12 Indirect Cost Rate Administration Attachment FY2011-12 More Documents & Publications AcqGuide42pt1.doc&0; Acquisition Letter No. AL 2008-02 Department of...

  10. Dual-shank attachment design for omega seals

    DOE Patents [OSTI]

    Sattinger, Stanley S.

    1978-01-01

    An improved apparatus and process for attaching welded omega seal segments to reactor heads, standpipes, mechanisms, and plugs comprises a first shank in combination with a second shank to attach an omega seal at a metal-to-metal interface.

  11. AttachmentFlash_2010-65.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    65.pdf AttachmentFlash2010-65.pdf PDF icon AttachmentFlash2010-65.pdf More Documents & Publications fac2001-26.pdf DOELabor Leadership Roundtable Meeting Generic copy of DOE's...

  12. EECBG SEP Attachment 1 - Process metric list | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEP Attachment 1 - Process metric list EECBG SEP Attachment 1 - Process metric list Reporting Guidance Process Metric List eecbg_10_07b_sep__10_006a_attachment1_process_metric_list.pdf (93.56 KB) More Documents & Publications EECBG 10-07C/SEP 10-006B Attachment 1: Process Metrics List EECBG Program Notice 10-07A DOE Recovery Act Reporting Requirements for the State Energy Program

  13. SECTION L -ATTACHMENT B - LISTING OF KEY PERSONNEL

    National Nuclear Security Administration (NNSA)

    B, Page 1 SECTION L ATTACHMENT B LISTING OF KEY PERSONNEL TITLE NAME Note: Addremove extra rows if needed...

  14. Standard Financing Offer Template (IDIQ Attachment J-12) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Standard Financing Offer Template (IDIQ Attachment J-12) Standard Financing Offer Template (IDIQ Attachment J-12) Document features a template to help communicate a finance offer as part of an energy savings performance contract. Download the standard financing offer template. (30.52 KB) More Documents & Publications Investor Deal Summary Template (IDIQ Attachment J-11) ESPC Task Order Financial Schedules (IDIQ Attachment J-6) Descriptions of ESPC Task Order Schedules and

  15. Cable attachment for a radioactive brachytherapy source capsule

    DOE Patents [OSTI]

    Gross, Ian G; Pierce, Larry A

    2006-07-18

    In cancer brachytherapy treatment, a small californium-252 neutron source capsule is attached to a guide cable using a modified crimping technique. The guide cable has a solid cylindrical end, and the attachment employs circumferential grooves micromachined in the solid cable end. The attachment was designed and tested, and hardware fabricated for use inside a radioactive hot cell. A welding step typically required in other cable attachments is avoided.

  16. Attachment 3.a. Part A Page 1 of 6

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ......... 3 A.7. Billing & Payment ......of the requesting agency and servicing agency. A.7. Billing & Payment Attachment 3.a. ...

  17. Photoswitchable method for the ordered attachment of proteins to surfaces

    DOE Patents [OSTI]

    Camarero, Julio A.; De Yoreo, James J.; Kwon, Youngeun

    2010-04-20

    Described herein is a method for the attachment of proteins to any solid support with control over the orientation of the attachment. The method is extremely efficient, not requiring the previous purification of the protein to be attached, and can be activated by UV-light. Spatially addressable arrays of multiple protein components can be generated by using standard photolithographic techniques.

  18. ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT (302.66 KB) More Documents & Publications Assessment B - Program Criteria Assessment C-Site Visit Protocol DOE O 243.1B, Records Management Program

  19. Attachment 4: Unrevised SFO Paragraphs Reissued | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4: Unrevised SFO Paragraphs Reissued Attachment 4: Unrevised SFO Paragraphs Reissued Unrevised SFO Paragraphs Reissued (35.68 KB) More Documents & Publications Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 1: Green Lease Policies and Procedures for Lease Acquisition 1

  20. AL2000-10Attach.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AL2000-10Attach.pdf AL2000-10Attach.pdf PDF icon AL2000-10Attach.pdf More Documents & Publications AL2000-10R.pdf AL2004-01r2.pdf Consent Order, Fluor Federal Services - EA-2000-10...

  1. Photoswitchable method for the ordered attachment of proteins to surfaces

    DOE Patents [OSTI]

    Camarero, Julio A.; DeYoreo, James J.; Kwon, Youngeun

    2011-07-05

    Described herein is a method for the attachment of proteins to any solid support with control over the orientation of the attachment. The method is extremely efficient, not requiring the previous purification of the protein to be attached, and can be activated by UV-light. Spatially addressable arrays of multiple protein components can be generated by using standard photolithographic techniques.

  2. Microsoft Word - Attachment coversheet.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HANFORD MISSION SUPPORT CONTRACT ADVANCE UNDERSTANDING ON COST REVISED DECEMBER 31, 2014 Mission Support Contract Contract Number DE-AC06-09RL14728 Attachment J, Section J.8 Modification 479 ii CHANGE HISTORY Version Date Change Author Change Summary 6.0 December 31, 2014 Ricky Churchman Updated to incorporate: Retention as a part of the Hiring/Signing bonuses 5.1 August 26, 2014 Ricky Churchman Updated to incorporate: Use of Government/Contractor Leased Vehicles for Offsite Transportation 5.0

  3. Appendix DATA Attachment A: WIPP Borehole Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A: WIPP Borehole Update United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment A: WIPP Borehole Update Table of Contents DATA-A-1.0 WIPP Boreholes DATA-A-2.0 Individual Well Reports DATA-A-2.1 New Wells Drilled Since the CRA-2009 DATA-A-2.2 Plugged Wells DATA-A-3.0 References List of Tables Table DATA-A- 1. Status of WIPP Boreholes December 2012 WIPP Table DATA-A-1. Status of WIPP Boreholes December 2012 WIPP

  4. Microsoft Word - ATTACHMENT A Suppl 5.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ATTACHMENT A: Modeling in Support of Additional Two-Unit Operating Configurations Unit 1 & Unit 2 Operation - SO2 Table Mirant Potomac, Alexandria, Virginia Maximum Impacts Predicted by AERMOD-PRIME Compliance Based on Highest, Second-Highest Short-term and Highest Annual Concentrations Units 1 & 2 on 24 hrs/day @ Max load SO2 = 0.31 lb/MBtu for both units. AERMOD- PRIME Monitored Background AERMOD-PRIME + Background NAAQS Distance Direction Ground Elevation Flagpole Elevation X (m) Y

  5. Predicting Envelope Leakage in Attached Dwellings

    SciTech Connect (OSTI)

    Faakye, O.; Arena, L.; Griffiths, D.

    2013-07-01

    The most common method for measuring air leakage is to use a single blower door to pressurize and/or depressurize the test unit. In detached housing, the test unit is the entire home and the single blower door measures air leakage to the outside. In attached housing, this 'single unit', 'total', or 'solo' test method measures both the air leakage between adjacent units through common surfaces as well air leakage to the outside. Measuring and minimizing this total leakage is recommended to avoid indoor air quality issues between units, reduce energy losses to the outside, reduce pressure differentials between units, and control stack effect. However, two significant limitations of the total leakage measurement in attached housing are: for retrofit work, if total leakage is assumed to be all to the outside, the energy benefits of air sealing can be significantly over predicted; for new construction, the total leakage values may result in failing to meet an energy-based house tightness program criterion. The scope of this research is to investigate an approach for developing a viable simplified algorithm that can be used by contractors to assess energy efficiency program qualification and/or compliance based upon solo test results.

  6. DOE/RL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATTACHMENTS February 28, 2012 Rev 1 Page 31 ATTACHMENT 2 Lifting Requirements for Concrete Blocks DOERL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS February 28,...

  7. Dissociative electron attachment studies on acetone

    SciTech Connect (OSTI)

    Prabhudesai, Vaibhav S. Tadsare, Vishvesh; Ghosh, Sanat; Gope, Krishnendu; Davis, Daly; Krishnakumar, E.

    2014-10-28

    Dissociative electron attachment (DEA) to acetone is studied in terms of the absolute cross section for various fragment channels in the electron energy range of 020 eV. H{sup ?} is found to be the most dominant fragment followed by O{sup ?} and OH{sup ?} with only one resonance peak between 8 and 9 eV. The DEA dynamics is studied by measuring the angular distribution and kinetic energy distribution of fragment anions using Velocity Slice Imaging technique. The kinetic energy and angular distribution of H{sup ?} and O{sup ?} fragments suggest a many body break-up for the lone resonance observed. The ab initio calculations show that electron is captured in the multi-centered anti-bonding molecular orbital which would lead to a many body break-up of the resonance.

  8. Vacuum die attach for integrated circuits

    DOE Patents [OSTI]

    Schmitt, Edward H.; Tuckerman, David B.

    1991-01-01

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required.

  9. Vacuum die attach for integrated circuits

    DOE Patents [OSTI]

    Schmitt, E.H.; Tuckerman, D.B.

    1991-09-10

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required. 1 figure.

  10. Microsoft Word - Flash2008-09Attachment.doc | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    9Attachment.doc More Documents & Publications Flash2007-02Attachment.doc&0; Microsoft Word - AL2000-05Attachment.doc Flash2007-03Attachment.doc&0;...

  11. Microsoft Word - AL2000-05Attachment.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment.doc Microsoft Word - AL2000-05Attachment.doc PDF icon Microsoft Word - AL2000-05Attachment.doc More Documents & Publications al99-06attachment.doc&0; EXHIBIT A: CRADA,...

  12. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Table of Contents

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    III SECTION J LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS TABLE OF CONTENTS Document Title Page Attachment A Personnel (Appendix A) ......................................................................................... ..3 Attachment B Key Personnel ......................................................................................................... 26 Attachment C Small Business Subcontracting Plan ...................................................................... 27

  13. Microsoft Word - Attachment J-5 Continuity of Operations Plan.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5-1 ATTACHMENT J.5 CONTINUITY OF OPERATIONS

  14. Investor Deal Summary Template (IDIQ Attachment J-11) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Investor Deal Summary Template (IDIQ Attachment J-11) Investor Deal Summary Template (IDIQ Attachment J-11) Document features a template for summarizing an investor or energy service company's deal as part of an energy savings performance contract. Download the Investor Deal Summary Template. (39.05 KB) More Documents & Publications ESPC Task Order Financial Schedules (IDIQ Attachment J-6) ESPC ENABLE Final Proposal Requirements Model Energy Savings Performance Contract,

  15. Certification and Rating of Attachments for Fenestration Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (DE-FOA-0001000) | Department of Energy Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) November 5, 2013 - 4:43pm Addthis This funding opportunity is closed Through this Funding Opportunity Announcement (FOA) the Building Technologies Office (BTO) seeks to establish a performance rating mechanism for assessing the energy performance of fenestration attachments. DOE

  16. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment E

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    E DE-AC36-08GO28308 Modification M1033 Attachment E Applicable Laws and Regulations (List A) Necessary and Sufficient Environmental, Safety and Health Standards CODE OF FEDERAL REGULATIONS (CFR) 7 CFR 340-Biotechnology Permits 10 CFR 8.4 - Interpretation by the General Counsel: AEC Jurisdiction 10 CFR 707 Workplace Substance Abuse Programs at DOE Sites 10 CFR 719 - Contractor Legal Management Requirements 10 CFR 835 - Occupational Radiation Protection 10 CFR 851 - Worker Safety and Health

  17. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment F

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    F DE-AC36-08GO28308 Modification M1033 Attachment F Operating and Administrative Requirements (List B) Prime Contract No. DE-AC36-08GO28308 The operating and administrative requirements, including the Contractor Requirements Documents of DOE directives listed below are applicable in whole or in part in accordance with clauses H-18 Application of DOE Contractor Requirements Documents and 970.5204-2, Laws, Regulations, and DOE Directives (DEC 2000). The concurrence analysis documenting

  18. SECTION L -ATTACHMENT B - LISTING OF KEY PERSONNEL

    National Nuclear Security Administration (NNSA)

    B, Page 1 SECTION L ATTACHMENT B LISTING OF KEY PERSONNEL TITLE NAME [Note: Add/remove extra rows if needed]

  19. Building America Case Study:Cladding Attachment Over Mineral...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cladding Attachment Over Mineral Fiber Insulation Board Ontario, Canada PROJECT INFORMATION Project Name: Climate-Exposed Long- Term Testing of Mineral Fiber Insulation Board Under ...

  20. Building America Expert Meeting: Cladding Attachment Over Exterior Insulation

    Broader source: Energy.gov [DOE]

    This expert meeting was conducted by Building Science Corporation on July 28, 2012 and focused on issues surrounding cladding attachment and performance of walls with exterior insulating sheathing.

  1. Attachment 3 b. Part A Page 1 of 6

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment 3 b. Part A Page 1 of 6 Section A - General Terms and Conditions ................................................................................................ 2 A.1. Purpose .................................................................................................................................................. 2 A.2. Authority ............................................................................................................................................... 2

  2. Microsoft Word - Attachment G1H.doc

    Office of Environmental Management (EM)

    APPENDIX H DESIGN DRAWINGS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT CARLSBAD, NEW ... ATTACHMENT G1 APPENDIX H DESIGN DRAWINGS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT ...

  3. Microsoft Word - Policy Flash 2010-82 Attachment 1 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    2 Attachment 1 More Documents & Publications Policy Flash 2010-82 Microsoft Word - Policy Flash 2008-07.doc Microsoft Word - Policy Flash 2008-10.doc...

  4. FLASH2003-12attachment.pdf | Department of Energy

    Office of Environmental Management (EM)

    FLASH2003-12attachment.pdf More Documents & Publications Flash2004-19.pdf Document DOE Princeton Plasma Physics Laboratory Purchase Power Agreement Request for Proposal...

  5. Nevada Test Site Environmental Report Attachment A: Site Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nevada Test Site Environmental Report Attachment A: Site Description DOENV25946--790-ATT A Nevada Test Site Environmental Report 2008 Disclaimer Reference herein to any specific ...

  6. Vacuum Attachment for Collection of Lithium Powder ---- Inventor...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Lithium Powder ---- Inventor(s) Hans Schneider and Stephan Jurczynski The Vacuum Attachment is part of an integrated system designed to collect Lithium (Li) Power for ...

  7. Appendix DATA Attachment B: WIPP Waste Containers and Emplacement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment B: WIPP Waste Containers and Emplacement Table of Contents DATA-B-1.0 Authorized Waste Emplacement ...

  8. Attachment 2: Solicitation for Offers with New and Revised Green...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Solicitation for Offers Paragraphs with ...

  9. Attachment 3: Instructions for Use of Green Lease Solicitation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart (1.84 MB) ...

  10. Attachment 1: Green Lease Policies and Procedures for Lease Acquisitio...

    Broader source: Energy.gov (indexed) [DOE]

    Green Lease Policies and Procedures for Lease Acquisition Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Energy Efficiency in Separate Tenant Spaces - ...

  11. Dissociative Electron Attachment to Carbon Dioxide via the 8.2 eV Feshbach resonance

    SciTech Connect (OSTI)

    Slaughter, Dan; Adaniya, Hidihito; Rescigno, Tom; Haxton, Dan; Orel, Ann; McCurdy, Bill; Belkacem, Ali

    2011-08-17

    Momentum imaging experiments on dissociative electron attachment (DEA) to CO{sub 2} are combined with the results of ab initio calculations to provide a detailed and consistent picture of the dissociation dynamics through the 8.2 eV resonance, which is the major channel for DEA in CO{sub 2}. The present study resolves several puzzling misconceptions about this system.

  12. Microsoft Word - Attachment J-1 Covered Site Contractors and Sub-Contractors.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-1-1 ATTACHMENT J.1 COVERED SITE CONTRACTORS/SUB-CONTRACTORS Covered Prime Contractors And Their Covered Sub-Contractors: HPM Corporation (HPMC) (10/1/2012 - present) HPMC Covered Subs: Computer Science Corp (CSC) Advanced Technologies and Laboratories International, Inc. (ATL) (5/16/2005- present) No subcontractors Battelle Memorial Institute/Pacific Northwest National Laboratory (PNNL) No subcontractors CH2M Hill Plateau Remediation Company (CHPRC) (10/01/2008 - present) No subcontractors

  13. Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reference Chart | Department of Energy 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart (1.84 MB) More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Microsoft Word - AL2008-05.doc

  14. DE-SOL-0002555 WIPP Solicitation J-33 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT H: RESERVED

  15. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment U

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U DE-AC36-08GO28308 Modification M1033 Attachment U Treaties and International Agreements Intellectual property rights for subject inventions made under NREL's award under the JCERDC will be allocated as set forth in the Agreement between the Department of Energy of the United States of America and the Government of the Republic of India of November 4, 2010 for Cooperation on a Joint Clean Energy Research and Development Center (JCERDC), and its "Project Annex on Intellectual Property

  16. Nevada Test Site Environmental Report 2007 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills

    2008-09-01

    This appendix expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2007 (U.S. Department of Energy [DOE], 2008). Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  17. Microsoft Word - Attachment J-1 Covered Site Contractors and Sub-Contractors (Mod 003).doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Section J Workers' Compensation Claims Services Penser North America, Inc. J-1-1 ATTACHMENT J.1 COVERED SITE CONTRACTORS/SUB-CONTRACTORS Current Covered Prime Contractors and their Covered Sub-Contractors: HPM Corporation (HPMC) (10/1/2012 - present) HPMC Covered Subs: Computer Science Corp (CSC) Advanced Technologies & Laboratories International, Inc. (ATL) (5/16/2005- present) No subcontractors Battelle Memorial Institute/Pacific Northwest National Laboratory (PNNL) No subcontractors

  18. DE-SOL-0008449 Attachment L-2b

    National Nuclear Security Administration (NNSA)

    level testing for NSDD Core installations DE-SOL-0008449 Attachment L-2b [Submit in Volume II, TAB 1] Instructions Attachment L-2b: Note: Attachment L-1a is limited to one (1) 8 ½ x 11 page limit. Experiences provided must be relevant to the work that the team member will be performing under this contract. The Offeror shall explain how the work performed by the experience is relevant to the indicator. Relevance is defined by Indicator as follows: A. Relevance to indicator A. is defined as

  19. Microsoft Word - Attachment G2E.doc

    Office of Environmental Management (EM)

    E DESIGN DRAWINGS SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2E Page G2E-1 of 38 1 Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2E Page G2E-2 of 38 1 Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2E Page G2E-3 of

  20. Predicting Envelope Leakage in Attached Dwellings

    Broader source: Energy.gov [DOE]

    This presentation was delivered at the U.S. Department of Energy Building America Technical Update meeting on April 29-30, 2013, in Denver, Colorado.

  1. Microsoft Word - Policy Flash 2010-78 Attachment 1 Unsuccessful...

    Office of Environmental Management (EM)

    1 Unsuccessful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 1 Unsuccessful Offeror Letter Template-Final 8-17-10 Microsoft Word -...

  2. Microsoft Word - Policy Flash 2010-78 Attachment 3 Conflicts...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Conflicts of Interest Cert- template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 3 Conflicts of Interest Cert- template-Final 8-17-10 Microsoft Word -...

  3. Microsoft Word - Policy Flash 2010-78 Attachment 2 Confidentiality...

    Energy Savers [EERE]

    2 Confidentiality Cert template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 2 Confidentiality Cert template-Final 8-17-10 Microsoft Word - Policy Flash...

  4. Microsoft Word - Policy Flash 2010-78 Attachment 4 Successful...

    Office of Environmental Management (EM)

    4 Successful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 4 Successful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy...

  5. River Corridor Closure Contract Section J, Attachment J-13

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Contract No. DE-AC06-08RL14655 A000 1 ATTACHMENT J-13 HANFORD SITE SERVICES Hanford Site Services are divided into three categories: Category 1: DOE will provide these Mandatory...

  6. Attachment FY2011-31 OPAM | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    attachment 3 flow chart of new 17.5 FAR Team update based on FAC2005-47 Dec 13, 2010 More Documents & Publications Flash2011-31 OPAM Flash2011-26 OPAM ATTACHMENTFLASH2011-26-OPAM...

  7. Attachment FY2011-58 OPAM | Department of Energy

    Energy Savers [EERE]

    INFORMATION REPORTING Attachment FY2011-58 OPAM More Documents & Publications Chapter 35 - Research and Development Contracting AcqGuide35pt1rev2.doc&0; Federal Assistance...

  8. Microsoft Word - Attachment J-2 Hardware and Software System...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-2-1 ATTACHMENT J.2 HARDWARE AND SOFTWARE SYSTEM REQUIREMENTS a. The Contractor shall provide a DOD 5015.x compliant individual electronic file system for each open claim in ...

  9. River Corridor Closure Contract Section J, Attachment J-6

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 Contract No. DE-AC06-05RL14655 Mod 459 1 ATTACHMENT J-6 ADVANCE AGREEMENT, PERSONNEL, AND RELATED COSTS This attachment will be prepared subsequent to Contract award pursuant to Clause H.15, Advance Understanding on Costs. The advance understandings listed below are subject to the specific limitations, conditions, and exclusions of subpart 31.2 of FAR as supplemented by Department of Energy Acquisition Regulation (DEAR) 931.2. TYPE OF COST ALLOWABILITY CLARIFICATION Beryllium Testing/Travel

  10. PART III -LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Occupational Medical Services at Hanford J-2-1 Section J Attachment J-2 LIST OF APPLICABLE DOE DIRECTIVES - LIST B The DOE Directives listed below contain requirements relevant to the scope of work under this contract. In most cases, the requirements applicable to the Contractor are contained in the Contractor Requirement Document attached to the DOE directive. These directives are applicable, in whole or in part, in accordance with Section I Clause entitled "DEAR 970.5204-2 LAWS,

  11. Pressurizer with a mechanically attached surge nozzle thermal sleeve

    SciTech Connect (OSTI)

    Wepfer, Robert M

    2014-03-25

    A thermal sleeve is mechanically attached to the bore of a surge nozzle of a pressurizer for the primary circuit of a pressurized water reactor steam generating system. The thermal sleeve is attached with a series of keys and slots which maintain the thermal sleeve centered in the nozzle while permitting thermal growth and restricting flow between the sleeve and the interior wall of the nozzle.

  12. Microsoft Word - Attachment G2B.doc

    Office of Environmental Management (EM)

    B SHAFT SEALING CONSTRUCTION PROCEDURES SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2B Page G2B-i ATTACHMENT G2 APPENDIX B SHAFT SEALING CONSTRUCTION PROCEDURES SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Appendix B Abstract This appendix describes equipment and procedures used to

  13. Attachment F - Bibliography and References | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    F - Bibliography and References Attachment F - Bibliography and References These documents are listed in Attachment F - Bibliography and References section of the Phase 2 Radiological Release Accident Investigation Report. DOE Order 225.1B, Accident Investigations, March 4, 2011 DOE Order 226.1B, Implementation of Department of Energy Oversight Policy, April 25, 2011 DOE Order 422.1, Conduct of Operations, June 29, 2010 DOE Order 426.1, Federal Technical Capability, November 19, 2009 DOE Manual

  14. Attachment 1: Green Lease Policies and Procedures for Lease Acquisition |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Green Lease Policies and Procedures for Lease Acquisition (45.31 KB) More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Energy Efficiency in Separate Tenant Spaces - A Feasibility Study

  15. Microsoft Word - Attachment G1.doc

    Office of Environmental Management (EM)

    ... Information on the proposed construction method is also 9 presented. 10 The design complies with all aspects of the design basis established for the WIPP panel-closure 11 system. ...

  16. Expert Meeting Report: Cladding Attachment Over Exterior Insulation (BSC Report)

    SciTech Connect (OSTI)

    2013-10-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. The location of the insulation to the exterior of the structure has many direct benefits including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased air tightness and improved water management (Hutcheon 1964, Lstiburek 2007). The intent of the meeting was to review the current state of industry knowledge regarding cladding attachment over exterior insulation with a specific focus on: 1. Gravity load resistance, 2. Wind load resistance. The presentations explore these topics from an engineering design, laboratory testing, field monitoring, as well as practical construction perspective. By bringing various groups together (who have been conduction research or have experience in this area), a more holistic review of the design limits and current code language proposals can be completed and additional gaps identified. The results of which will help inform design standards and criteria.

  17. Microsoft Word - Flash2008-08attachmentFAC22.doc | Department...

    Energy Savers [EERE]

    Flash2008-08attachmentFAC22.doc Microsoft Word - Flash2008-08attachmentFAC22.doc Microsoft Word - Flash2008-08attachmentFAC22.doc More Documents & Publications Policy Flash 2013-75...

  18. A NOVEL, FULLY AUTOMATED PIPELINE FOR PERIOD ESTIMATION IN THE EROS 2 DATA SET

    SciTech Connect (OSTI)

    Protopapas, Pavlos; Huijse, Pablo; Estévez, Pablo A.; Zegers, Pablo; Príncipe, José C.; Marquette, Jean-Baptiste

    2015-02-01

    We present a new method to discriminate periodic from nonperiodic irregularly sampled light curves. We introduce a periodic kernel and maximize a similarity measure derived from information theory to estimate the periods and a discriminator factor. We tested the method on a data set containing 100,000 synthetic periodic and nonperiodic light curves with various periods, amplitudes, and shapes generated using a multivariate generative model. We correctly identified periodic and nonperiodic light curves with a completeness of ∼90% and a precision of ∼95%, for light curves with a signal-to-noise ratio (S/N) larger than 0.5. We characterize the efficiency and reliability of the model using these synthetic light curves and apply the method on the EROS-2 data set. A crucial consideration is the speed at which the method can be executed. Using a hierarchical search and some simplification on the parameter search, we were able to analyze 32.8 million light curves in ∼18 hr on a cluster of GPGPUs. Using the sensitivity analysis on the synthetic data set, we infer that 0.42% of the sources in the LMC and 0.61% of the sources in the SMC show periodic behavior. The training set, catalogs, and source code are all available at http://timemachine.iic.harvard.edu.

  19. Attachment A: Modeling in Support of Additional Two-Unit Operating...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Docket No. ...

  20. Making your presentation fun: creative presentation techniques

    SciTech Connect (OSTI)

    KEENEN,MARTHA JANE

    2000-05-18

    What possesses someone to volunteer and go through hoops and red tape to make a presentation at a conference? For that matter, why does anyone ever present anything to anyone? Actually, presentations are a fact of life and there are many reasons for doing a presentation and doing it well. New and existing staff need training and orientation to the way things are done here. Handing all of them a manual and hoping they read it is pretty much a waste of paper. On the other hand, an effective, entertaining and upbeat presentation on the relevant topics is more likely to stick with those people. They will even have a name and face to remember and seek out when they have an issue on or with that topic. This can be a very effective beginning for networking with new peers. The presenter is seen as knowledgeable, as a source of information on company topics and possibly evaluated as a potential mentor or future manager. Project staff and/or peers benefit from clear, concise, presentations of topical knowledge. This is one way that a group working on various aspects of the same project or program can stay in touch and in step with each other. Most importantly, presentations may be the best or only door into the minds (and budgets) of management and customers. These presentations are a wonderful opportunity to address legal and compliance issues, budget, staffing, and services. Here is a chance, maybe the only one, to demonstrate and explain the wonderfulness of a program and the benefit they get by using the services offered most effectively. An interactive presentation on legal and compliance issues can be an effective tool in helping customers and/or management make good risk management decisions.

  1. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, M.A.; Zollinger, W.T.

    1992-09-22

    An apparatus is described for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the Kelly Vacuum System but can be modified for use with any standard mobile robot and cleaning tool. 14 figs.

  2. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    L, Attachment E, Page 1 SECTION L ATTACHMENT E PAST PERFORMANCE INFORMATION FORM 1. Complete Name of Offeror or Team Member 2. Contract Title and Location 3. Customer Name, Current Address, Telephone Number and E-mail 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date the Work was Completed 8. Initial Contract Price /Estimated Cost and Fee 9. Final Amount Invoiced/Amount Invoiced to Date 10a. Technical Point of Contact (see instruction below) 10b.

  3. Biocompatible implants and methods of making and attaching the same

    DOE Patents [OSTI]

    Rowley, Adrian P; Laude, Lucien D; Humayun, Mark S; Weiland, James D; Lotfi, Atoosa; Markland, Jr., Francis S

    2014-10-07

    The invention provides a biocompatible silicone implant that can be securely affixed to living tissue through interaction with integral membrane proteins (integrins). A silicone article containing a laser-activated surface is utilized to make the implant. One example is an implantable prosthesis to treat blindness caused by outer retinal degenerative diseases. The device bypasses damaged photoreceptors and electrically stimulates the undamaged neurons of the retina. Electrical stimulation is achieved using a silicone microelectrode array (MEA). A safe, protein adhesive is used in attaching the MEA to the retinal surface and assist in alleviating focal pressure effects. Methods of making and attaching such implants are also provided.

  4. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, M.A.; Zollinger, W.T.

    1991-01-01

    This invention is comprised of an apparatus for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the KELLY VACUUM SYSTEM but can be modified for use with any standard mobile robot and cleaning tool.

  5. Method for detecting pathogens attached to specific antibodies

    DOE Patents [OSTI]

    Miles, Robin R.; Venkateswaran, Kodumudi S.; Fuller, Christopher K.

    2005-01-25

    The use of impedance measurements to detect the presence of pathogens attached to antibody-coated beads. In a fluidic device antibodies are immobilized on a surface of a patterned interdigitated electrode. Pathogens in a sample fluid streaming past the electrode attach to the immobilized antibodies, which produces a change in impedance between two adjacent electrodes, which impedance change is measured and used to detect the presence of a pathogen. To amplify the signal, beads coated with antibodies are introduced and the beads would stick to the pathogen causing a greater change in impedance between the two adjacent electrodes.

  6. Impedance measurements for detecting pathogens attached to antibodies

    DOE Patents [OSTI]

    Miles, Robin R.; Venkateswaran, Kodumudi S.; Fuller, Christopher K.

    2004-12-28

    The use of impedance measurements to detect the presence of pathogens attached to antibody-coated beads. In a fluidic device antibodies are immobilized on a surface of a patterned interdigitated electrode. Pathogens in a sample fluid streaming past the electrode attach to the immobilized antibodies, which produces a change in impedance between two adjacent electrodes, which impedance change is measured and used to detect the presence of a pathogen. To amplify the signal, beads coated with antibodies are introduced and the beads would stick to the pathogen causing a greater change in impedance between the two adjacent electrodes.

  7. Appendix DATA Attachment B: WIPP Waste Containers and Emplacement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment B: WIPP Waste Containers and Emplacement United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment B: WIPP Waste Containers and Emplacement Table of Contents DATA-B-1.0 Authorized Waste Emplacement Containers DATA-B-1.1 Container Descriptions DATA-B-1.2 Dunnage Containers DATA-B-1.3 Payload Descriptions DATA-B-1.4 Emplacement Configurations DATA-B-2.0 References List of Figures Figure DATA-B- 1. 55-gal Drum

  8. Interface structure for hub and mass attachment in flywheel rotors

    DOE Patents [OSTI]

    Deteresa, Steven J.; Groves, Scott E.

    1998-06-02

    An interface structure for hub and mass attachment in flywheel rotors. The interface structure efficiently transmits high radial compression forces and withstands both large circumferential elongation and local stresses generated by mass-loading and hub attachments. The interface structure is comprised of high-strength fiber, such as glass and carbon, woven into an angle pattern which is about 45.degree. with respect to the rotor axis. The woven fiber is bonded by a ductile matrix material which is compatible with and adheres to the rotor material. This woven fiber is able to elongate in the circumferential direction to match the rotor growth during spinning.

  9. Interface structure for hub and mass attachment in flywheel rotors

    DOE Patents [OSTI]

    Deteresa, S.J.; Groves, S.E.

    1998-06-02

    An interface structure is described for hub and mass attachment in flywheel rotors. The interface structure efficiently transmits high radial compression forces and withstands both large circumferential elongation and local stresses generated by mass-loading and hub attachments. The interface structure is comprised of high-strength fiber, such as glass and carbon, woven into an angle pattern which is about 45{degree} with respect to the rotor axis. The woven fiber is bonded by a ductile matrix material which is compatible with and adheres to the rotor material. This woven fiber is able to elongate in the circumferential direction to match the rotor growth during spinning. 2 figs.

  10. Reliability Testing the Die-Attach of CPV Cell Assemblies

    SciTech Connect (OSTI)

    Bosco, N.; Sweet, C.; Kurtz, S.

    2011-02-01

    Results and progress are reported for a course of work to establish an efficient reliability test for the die-attach of CPV cell assemblies. Test vehicle design consists of a ~1 cm2 multijunction cell attached to a substrate via several processes. A thermal cycling sequence is developed in a test-to-failure protocol. Methods of detecting a failed or failing joint are prerequisite for this work; therefore both in-situ and non-destructive methods, including infrared imaging techniques, are being explored as a method to quickly detect non-ideal or failing bonds.

  11. Part III - List of Documents, Exhibits, and Other Attachments

    National Nuclear Security Administration (NNSA)

    Updated 9/30/15 to Mod 0588 Contract No. DE-AC04-94AL85000 Modification No. M202 Section J - Page 1 Part III - List of Documents, Exhibits, and Other Attachments Section J LIST OF ATTACHMENTS Document Appendix A - Personnel Appendix (Revised RAs 1-12 and Mods M0541, M0558) Appendix B - Statement of Work (Revised M244, M264) Appendix C - Special Bank Account Agreement (Revised M248, M271, M461, M497, M508) Appendix D - Key Personnel (Revised M216, M224, M227, M229, M233, M252, M257, M272, M275,

  12. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    L, Attachment E, Page 1 SECTION L ATTACHMENT E PAST PERFORMANCE INFORMATION FORM 1. Complete Name of Offeror or Team Member 2. Contract Title and Location 3. Customer Name, Current Address, Telephone Number and E-mail 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date the Work was Completed 8. Initial Contract Price /Estimated Cost and Fee 9. Final Amount Invoiced/Amount Invoiced to Date 10a. Technical Point of Contact (see instruction below) 10b.

  13. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, Mark A.; Zollinger, W. Thor

    1992-01-01

    An apparatus for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the KELLY VACUUM SYSTEM but can be modified for use with any standard mobile robot and cleaning tool.

  14. Methods and materials for nanocrystalline surface coatings and attachment of peptide amphiphile nanofibers thereon

    DOE Patents [OSTI]

    Stupp, Samuel I.; Spoerke, Erik D.; Anthony, Shawn G.; Niece; Krista L.

    2008-06-24

    Biocompatible composites comprising peptide amphiphiles and surface modified substrates and related methods for attachment thereon.

  15. River Corridor Closure Contract Section J, Attachment J-8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Contract No. DE-AC06-05RL14655 A000 1 ATTACHMENT J-8 EMPLOYEE BENEFITS AND PENSION PLANS Pursuant to application employee benefit and pension requirements in Contract Section H, Special Contract Requirement, the Contractor shall annually submit the Report of Contractor Expenditures for Employee Supplemental Compensation

  16. Attached-sunspace designs: a nationwide economic appraisal

    SciTech Connect (OSTI)

    Roach, F.; Kirschner, C.

    1980-01-01

    Performance estimates for attached-sunspace passive solar heated residences have recently been incorporated into the Los Alamos/UNM EASE III model. These estimates are used to analyze the economic performance of a fixed dimension sunspace design when attached to a pre-existing single family residential unit. The sunspace is a passive design which can be easily and effectively adapted to a retrofit situation. Several key parameters are carefully evaluated for the sunspace retrofit design. These include loan or mortgage terms, ownership period, resale potential and competing conventional fuel prices. General economic and design parameters are combined in a variant of life cycle costing to evaluate the feasibility of both owner-built and contractor-built attached sunspaces for 220 regions in the contiguous United States. This evaluation is made for two conventional fuel types - natural gas and electric resistance - and for three resale values - 0%, 100%, and 200%. Results show that the prospect for conventional fuel displacement through retrofit of attached sunspaces is very good with the design's economic performance enhanced in regions with expensive conventional fuel alternatives.

  17. New methods of nozzle attachment to FRP spray headers

    SciTech Connect (OSTI)

    Boucher, E.J.

    1995-06-01

    The traditional method of attaching spray nozzles to FRP spray headers in the absorber tower of a wet limestone system has been through the use of 150 lb. Flanges. This paper will illustrate two additional methods (grooved adapters & adhesive bonded nozzles) and will demonstrate the cost saving associated versus the flanged option, as well as the advantages and disadvantages of each system.

  18. Determining the exact number of dye molecules attached to colloidal CdSe/ZnS quantum dots in Frster resonant energy transfer assemblies

    SciTech Connect (OSTI)

    Kaiser, Uwe; Jimenez de Aberasturi, Dorleta; Vzquez-Gonzlez, Margarita; Carrillo-Carrion, Carolina; Niebling, Tobias; Parak, Wofgang J.; Heimbrodt, Wolfram

    2015-01-14

    Semiconductor quantum dots functionalized with organic dye molecules are important tools for biological sensor applications. Energy transfer between the quantum dot and the attached dyes can be utilized for sensing. Though important, the determination of the real number of dye molecules attached per quantum dot is rather difficult. In this work, a method will be presented to determine the number of ATTO-590 dye molecules attached to CdSe/ZnS quantum dots based on time resolved spectral analysis. The energy transfer from the excited quantum dot to the attached ATTO-590 dye leads to a reduced lifetime of the quantum dot's excitons. The higher the concentration of dye molecules, the shorter the excitonic lifetime becomes. However, the number of dye molecules attached per quantum dot will vary. Therefore, for correctly explaining the decay of the luminescence upon photoexcitation of the quantum dot, it is necessary to take into account the distribution of the number of dyes attached per quantum dot. A Poisson distribution of the ATTO-590 dye molecules not only leads to excellent agreement between experimental and theoretical decay curves but also additionally yields the average number of dye molecules attached per quantum dot. In this way, the number of dyes per quantum dot can be conveniently determined.

  19. ERAD 2014 Presentations

    Broader source: Energy.gov [DOE]

    2014 ENVIRONMENTAL/RADIOLOGICAL ASSISTANCE DIRECTORY (ERAD) PRESENTATIONS Below are the presentations presented during the 2014 Environmental/Radiological Assistance Directory (ERAD) meetings: Visual Sample Plan (VSP), DOECAP, Radiological and Environmental Sciences Laboratory (RESL) MAPEP

  20. Shunt attachment and method for interfacing current collection systems

    DOE Patents [OSTI]

    Denney, P.E.; Iyer, N.C.; Hannan, W.F. III.

    1992-12-08

    A composite brush to shunt attachment wherein a volatile component of a composite but mostly metallic brush, used for current collection purposes, does not upon welding or brazing, adversely affect the formation of the interfacial bond with a conductive shunt which carries the current from the zone of the brush. The brush to shunt attachment for a brush material of copper-graphite composite and a shunt of copper, or substituting silver for copper as an alternative, is made through a hot isostatic pressing (HIP). The HIP process includes applying high pressure and temperature simultaneously at the brush to shunt interface, after it has been isolated or canned in a metal casing in which the air adjacent to the interface has been evacuated and the interfacial area has been sealed before the application of pressure and temperature. 6 figs.

  1. Shunt attachment and method for interfacing current collection systems

    DOE Patents [OSTI]

    Denney, Paul E. (State College, PA); Iyer, Natraj C. (Columbia, SC); Hannan, III, William F. (Monroeville Boro, PA)

    1992-01-01

    A composite brush to shunt attachment wherein a volatile component of a composite but mostly metallic brush, used for current collection purposes, does not upon welding or brazing, adversely affect the formation of the interfacial bond with a conductive shunt which carries the current from the zone of the brush. The brush to shunt attachment for a brush material of copper-graphite composite and a shunt of copper, or substituting silver for copper as an alternative, is made through a hot isostatic pressing (HIP). The HIP process includes applying high pressure and temperature simultaneously at the brush to shunt interface, after it has been isolated or canned in a metal casing in which the air adjacent to the interface has been evacuated and the interfacial area has been sealed before the application of pressure and temperature.

  2. Turbine blade and non-integral platform with pin attachment

    SciTech Connect (OSTI)

    Campbell, Christian X; Eng, Darryl; Marra, John J

    2015-01-27

    Platforms (36, 38) span between turbine blades (23, 24, 25) on a disk (32). Each platform may be individually mounted to the disk by a pin attachment (42). Each platform (36) may have a rotationally rearward edge portion (50) that underlies a forward portion (45) of the adjacent platform (38). This limits centrifugal bending of the rearward portion of the platform, and provides coolant sealing. The rotationally forward edge (44A, 44B) of the platform overlies a seal element (51) on the pressure side (28) of the forwardly adjacent blade, and does not underlie a shelf on that blade. The pin attachment allows radial mounting of each platform onto the disk via tilting (60) of the platform during mounting to provide mounting clearance for the rotationally rearward edge portion (50). This facilitates quick platform replacement without blade removal.

  3. Turbine blade and non-integral platform with pin attachment

    DOE Patents [OSTI]

    Campbell, Christian Xavier; Eng, Darryl; Marra, John J.

    2016-08-02

    Platforms (36, 38) span between turbine blades (23, 24, 25) on a disk (32). Each platform may be individually mounted to the disk by a pin attachment (42). Each platform (36) may have a rotationally rearward edge portion (50) that underlies a forward portion (45) of the adjacent platform (38). This limits centrifugal bending of the rearward portion of the platform, and provides coolant sealing. The rotationally forward edge (44A, 44B) of the platform overlies a seal element (51) on the pressure side (28) of the forwardly adjacent blade, and does not underlie a shelf on that blade. The pin attachment allows radial mounting of each platform onto the disk via tilting (60) of the platform during mounting to provide mounting clearance for the rotationally rearward edge portion (50). This facilitates quick platform replacement without blade removal.

  4. Solar Webinar Presentation Slides

    Office of Energy Efficiency and Renewable Energy (EERE)

    Download presentation slides from the DOE Office of Indian Energy Webinar on solar renewable energy.

  5. Biomass Webinar Presentation Slides

    Office of Energy Efficiency and Renewable Energy (EERE)

    Download presentation slides for the DOE Office of Indian Energy webinar on biomass renewable energy.

  6. STEP Partner Presentation

    Broader source: Energy.gov [DOE]

    STEP Partner Presentation, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  7. STEP Conference Presentation

    Broader source: Energy.gov [DOE]

    STEP Conference Presentation, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  8. Presentations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Presentations Presentations Energy Department presentations allow stakeholders to learn and engage around innovative technology development. Source: Geothermal Resources Council Energy Department presentations allow stakeholders to learn and engage around innovative technology development. Source: Geothermal Resources Council Douglas Hollett, former office director for the Geothermal Technologies Office, addresses over 1,000 during his keynote address at the annual

  9. PART III … LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    National Nuclear Security Administration (NNSA)

    Page 130 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J LIST OF APPENDICES - TABLE OF CONTENTS Appendix A Statement of Work Appendix B Award Fee Plan Appendix C Transition Plan Appendix D Sensitive Foreign Nations Control Appendix E Performance Guarantee Agreement(s) Appendix F List of Applicable Directives Appendix G Personnel Appendix Appendix H Key Personnel Appendix I Small Business Subcontracting Plan Appendix J Diversity Plan Guidance Appendix K Program Management

  10. SECTION L … ATTACHMENT A - PERFORMANCE GUARANTEE AGREEMENT

    National Nuclear Security Administration (NNSA)

    A, Page 1 SECTION L ATTACHMENT A PERFORMANCE GUARANTEE AGREEMENT For value received, and in consideration of, and in order to induce the United States (the Government) to enter into Contract [insert Contract number] for the management and operation of the Nevada National Security Site (the "Contract") dated _______________, by and between the Government and _______________ (Contractor), the undersigned, ____________________ _______________ (Guarantor), a corporation incorporated in the

  11. River Corridor Closure Contract Section J, Attachment J-14

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Contract No. DE-AC06-08RL14655 A099 1 SECTION J, ATTACHMENT J-14 ACRONYM LIST The following acronyms are used in this Contract: AB Authorization Basis ACO Administrative Contracting Officer ACWP Actual Cost of Work Performed ADR Alternative Dispute Resolution ARRA American Recovery and Reinvestment Act B&R Budgeting and Reporting BCWP Budgeted Cost of Work Performed BCWS Budgeted Cost of Work Scheduled BHI Bechtel Hanford, Inc. BMS Business Management System BRC Budget and Reporting

  12. Microsoft Word - Attachment 1 DICCE2 Statement of Work

    National Nuclear Security Administration (NNSA)

    Attachment 1 DE-SOL-0008449 1. OBJECTIVE The objective of this procurement is to install integrated sustainable radiation detection equipment at selected international land border crossings, airports, feeder ports and seaports in cooperation with international partners around the world in order to strengthen the overall capability of partner countries to deter, detect, and interdict illicit trafficking in special nuclear and other radiological materials. The focus is on the integration

  13. Removable, hermetically-sealing, filter attachment system for hostile environments

    DOE Patents [OSTI]

    Mayfield, Glenn L [Richland, WA

    1983-01-01

    A removable and reusable filter attachment system. A filter medium is fixed o, and surrounded by, a filter frame having a coaxial, longitudinally extending, annular rim. The rim engages an annular groove which surrounds the opening of a filter housing. The annular groove contains a fusible material and a heating mechanism for melting the fusible material. Upon resolidifying, the fusible material forms a hermetic bond with the rim and groove. Remelting allows detachment and replacement of the filter frame.

  14. Pin and roller attachment system for ceramic blades

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-07-25

    In a turbine, a plurality of blades are attached to a turbine wheel by way of a plurality of joints which form a rolling contact between the blades and the turbine wheel. Each joint includes a pin and a pair of rollers to provide rolling contact between the pin and an adjacent pair of blades. Because of this rolling contact, high stress scuffing between the blades and the turbine wheel reduced, thereby inhibiting catastrophic failure of the blade joints. 3 figs.

  15. Pin and roller attachment system for ceramic blades

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    In a turbine, a plurality of blades are attached to a turbine wheel by way of a plurality of joints which form a rolling contact between the blades and the turbine wheel. Each joint includes a pin and a pair of rollers to provide rolling contact between the pin and an adjacent pair of blades. Because of this rolling contact, high stress scuffing between the blades and the turbine wheel reduced, thereby inhibiting catastrophic failure of the blade joints.

  16. Expert Meeting Report: Cladding Attachment Over Exterior Insulation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cladding Attachment Over Exterior Insulation P. Baker Building Science Corporation October 2013 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, subcontractors, or affiliated partners makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus,

  17. Microsoft Word - Attachment B - Reporting Requirements.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DE-SOL-0003339 J.1 ATTACHMENT B - REPORTING REQUIREMENTS REPORTING REQUIREMENTS CHECKLIST 1. AWARDEE: 2. IDENTIFICATION NUMBER: REPORT SUBMISSION: Reports shall be submitted to the electronic addresses indicated in the NETL-identified distribution list provided in the post award debriefing. Electronic copies of each report must be submitted to the Contract Specialist (CS) and Contracting Officer's Representative (COR). 4. PLANNING AND REPORTING REQUIREMENTS FORM NO. FREQ. NO. OF COPIES FORM NO.

  18. Attachment J-16 Portfolio Management Task Order 14-001

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mod 323 Attachment J-16 Portfolio Management Task Order 14-001 Statement of Work - 1 - Title: AMRP PBS 41 - Project Management / Project Controls Support Revision Number: 0 Date: September 17, 2013 Start: October 1, 2013 Finish: September 30, 2014 1.0 DESCRIPTION Mission Support Alliance (MSA) Portfolio Management (PFM) will provide the following project management/project controls support services as described below. The services will be performed in accordance with Contract DE-AC06-09RL14728,

  19. SEC L_Attach G_Key Personnel Cost Sheet

    National Nuclear Security Administration (NNSA)

    L, Attachment G - Management Team Cost Sheet Definitions of items to be included in the worksheet Name Title Key Personnel (Y/N) Reimbursable Annual Base Salary Reimbursable Incentive Pay and bonuses Reimbursable Deferred compensation Reimbursable Employer contributions to Employee Stock Ownership Plans (ESOPs) Reimbursable Employer Contributions to Defined Contribution Pension Plans Current Annual Base Salary Current Total Annual Compensation An ESOP is a stock bonus plan designed to invest

  20. Poster Presentation Purpose

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentation Purpose The primary purpose of the poster presentation is to provide an opportunity to communicate the results of research and to initiate discussion among science colleagues. Because poster presentations are usually done in groups, with observers milling around a large room of posters, the presentations are relaxed and more conducive to the exchange of ideas and techniques between presenters and observers. The Poster A good poster is uncluttered and clear in design. It has legible

  1. Workplace Charging Presentation

    Broader source: Energy.gov [DOE]

    Educate employers about plug-in electric vehicles and workplace charging using this sample presentation. The presentation covers the basics of PEVs and workplace charging as well as the benefit of...

  2. User Data Forum Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations User Data Forum Presentations Sort by: Default | Name | Date (low-high) | ... M02: The Future of Data and Scientific Workflow June 16, 2014 | Author(s): Michael Wilde, ...

  3. Senior Debt Fastball Presentation

    Broader source: Energy.gov [DOE]

    Plenary III: Project Finance and Investment Senior Debt Fastball Presentation Phillip Thomas, Senior Vice President of Commercial Lending, Heartland Bank

  4. Tritium 2013 Presentation

    Broader source: Energy.gov [DOE]

    Presentation from the 32nd Tritium Focus Group Meeting held in Germantown, Maryland on April 23-25, 2013.

  5. Renewable Energy 101 (Presentation)

    SciTech Connect (OSTI)

    Walker, A.

    2012-03-01

    Presentation given at the 2012 Department of Homeland Security Renewable Energy Roundtable as an introduction to renewable technologies and applications.

  6. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Mai, T.

    2012-08-01

    This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. This presentation was presented in a Wind Powering America webinar on August 15, 2012 and is now available through the Wind Powering America website.

  7. PolFlash10-31_attach1.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    PolFlash10-31attach1.pdf More Documents & Publications PolFlash10-31.pdf PolFlash10-31attach2.pdf Initial Application for FAC-C, Purchasing, Financial Assistance and Property...

  8. Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business...

    Office of Environmental Management (EM)

    43 DOE F 4220.2 Small Business Review Form Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business Review Form Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business...

  9. Microsoft Word - ARRAGuideAttachment10v1.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ARRAGuideAttachment10v1.doc Microsoft Word - ARRAGuideAttachment10v1.doc More Documents & Publications Microsoft Word - ARRAAttachment12v1.doc Microsoft Word - DRAFT CRB Interview Guidance

  10. Attached is Policy Flash 2013-34 Department of Energy Acquisition...

    Broader source: Energy.gov (indexed) [DOE]

    Attached is Policy Flash 2013-34 Department of Energy Acquisition Letter 2013-04 on Executive Compensation The information attached to this policy flash may be superseded at a...

  11. Attachment A: Modeling in Support of Additional Two-Unit Operating

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Configurations | Department of Energy Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Docket No. EO-05-01: Attachment to the Operating Plan of Mirant Potomac River, LLC Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations (28.18 KB) More Documents & Publications Mirant Potomac, Alexandria, Virginia: Maximum Impacts Predicted by AERMOD-PRIME

  12. EECBG 10-07C/SEP 10-006B Attachment 1: Process Metrics List |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 10-07C/SEP 10-006B Attachment 1: Process Metrics List EECBG 10-07C/SEP 10-006B Attachment 1: Process Metrics List eecbg_sep_reporting_guidance_attachment_06242011.pdf (56.65 KB) More Documents & Publications EECBG SEP Attachment 1 - Process metric list EECBG Program Notice 10-07A DOE Recovery Act Reporting Requirements for the State Energy Program

  13. Post-Installation Report Outline (IDIQ Attachment J-9) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Installation Report Outline (IDIQ Attachment J-9) Post-Installation Report Outline (IDIQ Attachment J-9) Document offers a post-installation report outline sample for an energy savings performance contract. Download the post-installation report outline document. (56.26 KB) More Documents & Publications Measurement and Verification Plan and Savings Calculations Methods Outline (IDIQ Attachment J-8) Annual Report Outline (IDIQ Attachment J-10) ESPC Task Order Financial Schedules

  14. AttachmentFlash_2010-22(1).pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    22(1).pdf AttachmentFlash2010-22(1).pdf PDF icon AttachmentFlash2010-22(1).pdf More Documents & Publications Policy Flash 2016-10 fac2001-27.pdf AttachmentFlash2010-55.pdf...

  15. ARM - LASSO Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations LASSO Information LASSO Home LASSO Backgrounder Pilot Phase Begins for Routine Large-Eddy Simulations Pilot Project Timeline Presentations News Science LASSO Implementation Strategy LASSO Pilot Project Releases Related Information ARM Decadal Vision Archive of LASSO Information e-mail list Contacts William Gustafson, Lead Principal Investigator Andrew Vogelmann, Co-Principal Investigator Hanna Goss, Media Contact LASSO Presentations 17th Annual WRF Users' Workshop, July 28, 2016

  16. Science Highlights Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Highlights Presentations Science Highlights Presentations NERSC collects highlights of recent scientific work carried out by its users. If you are a user and have work that you would like us to highlight please send e-mail to consult@nersc.gov. In the list below, names of researchers who did the work appear in brackets. June 2016 Presentation [PDF] Better Materials for Quantum Computing [Govoni, Galli (University of Chicago), Nature Scientific Reports, Vol. 6, No. 20803, Feb. 16, 2016] [BES]

  17. Meeting Notes and Presentations

    Office of Environmental Management (EM)

    Corporate Board Notes and Slides Notes from EM Corporate QA Board Tele-Conference - February 22, 2010 1 of 2 General: Attendance of voting board members was documented. All members were present or had a representative present on the call. Previous 5 Focus Areas: Dave Tuttel presented the proposed closeout of the previous 5 focus areas for the EM Corporate Board. * Focus Area 1 (Requirements Flow Down) - Board voted to close the focus area (unanimous) * Focus Area 2 (Adequate NQA-1 Suppliers) -

  18. PowerPoint Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1: Oct 15, 2014 Antonio M. Bouza Technology Manager, Emerging Technologies Building Technologies Office 2 None of the information presented here is legally binding. The content included in this presentation is intended only to summarize the contents of funding opportunity DE-FOA-0001166. Any content within this presentation that appears inconsistent from the FOA language is superseded by the FOA language. All Applicants are strongly encouraged to carefully read the FOA guidelines and adhere to

  19. Budget Presentations - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Budget Presentations Hanford Site Budget Budget Presentations Budget Presentations Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size Each year the Office of River Protection and Richland Operations Office are required to prepare an annual budget submittal that is consistent with the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement (TPA), and meets regulatory requirements. The TPA is the regulatory framework between DOE,

  20. Energy Exchange Presentations

    Broader source: Energy.gov [DOE]

    Presentations from Energy Exchange, a two-and-a-half day training scheduled for August 11-13, 2015, at the Phoenix Convention Center in Phoenix, Arizona.

  1. PowerPoint Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    STEM Volunteer Training: Volunteer Opportunities April 14, 2016 Names of Presenters Megan Davis Program Manager TechBridge Rabiah Mayas, Ph.D. Director of Science and Integrated ...

  2. Presentations for Industry

    Office of Energy Efficiency and Renewable Energy (EERE)

    Learn energy-saving strategies from leading manufacturing companies and energy experts. The presentations are organized below by topic area. In addition, industrial energy managers, utilities, and...

  3. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dr. Isabelle Wheeler, Program Manager Tank Farm Projects - Waste Feed Delivery Systems Provision of a Tank Waste Characterization and Staging Capability at Hanford Presentation:...

  4. Meeting Notes and Presentations

    Office of Environmental Management (EM)

    Tele-Conference - February 22, 2010 2 of 2 Approach for Remaining Focus Areas: Robert Murray presented a proposed approach to divide the remaining focus areas into three...

  5. Science Highlights Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... 1579-1600, 2015 BER Polarized Laser Pulses Could Change Nature of Graphene T. ... Presentation PDF Modelling Aids Radiation Damage Studies R. Devanathan, Pacific ...

  6. PowerPoint Presentation

    Office of Environmental Management (EM)

    Ground Water Issues Presentation for DOE Tritium Focus Group May 5-6, 2015 Steven M. ... * Industry initiated a voluntary ground water monitoring program * NRC is monitoring the ...

  7. Meeting and Presentation Materials

    Office of Environmental Management (EM)

    ... our construction projects to present forecasting and procurement opportunities to the ... will reduce supplier confusion; reduce costs for supplier compliance; increase supplier ...

  8. Renewable Hydrogen (Presentation)

    SciTech Connect (OSTI)

    Remick, R. J.

    2009-11-16

    Presentation about the United State's dependence on oil, how energy solutions are challenging, and why hydrogen should be considered as a long-term alternative for transportation fuel.

  9. PowerPoint Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    State Climate and Energy Planning 2 About this Presentation ... - Energy efficiency resource standard (EERS) - ... On the Horizon * Enterprise scaling, allowing for multiple ...

  10. Self-unitarization of New Higgs Inflation and compatibility with Planck and BICEP2 data

    SciTech Connect (OSTI)

    Germani, Cristiano; Wintergerst, Nico; Watanabe, Yuki E-mail: watanabe@resceu.s.u-tokyo.ac.jp

    2014-12-01

    In this paper we show that the Germani-Kehagias model of Higgs inflation (or New Higgs Inflation), where the Higgs boson is kinetically non-minimally coupled to the Einstein tensor is in perfect compatibility with the latest Planck and BICEP2 data. Moreover, we show that the tension between the Planck and BICEP2 data can be relieved within the New Higgs inflation scenario by a negative running of the spectral index. Regarding the unitarity of the model, we argue that it is unitary throughout the evolution of the Universe. Weak couplings in the Higgs-Higgs and Higgs-graviton sectors are provided by a large background dependent cut-off scale during inflation. In the same regime, the W and Z gauge bosons acquire a very large mass, thus decouple. On the other hand, if they are also non-minimally coupled to the Higgs boson, their effective masses can be enormously reduced. In this case, the W and Z bosons are no longer decoupled. After inflation, the New Higgs model is well approximated by a quartic Galileon with a renormalizable potential. We argue that this can unitarily create the right conditions for inflation to eventually start.

  11. Nevada National Security Site Environmental Report 2012 Attachment A: Site Description

    SciTech Connect (OSTI)

    Wills, Cathy A

    2013-09-11

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  12. Nevada National Security Site Environmental Report 2011 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills, ed.

    2012-09-12

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2011. Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  13. Nevada National Security Site Environmental Report 2013 Attachment A: Site Description

    SciTech Connect (OSTI)

    Wills, C.

    2014-09-09

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  14. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Hand, M.; Mai, T.

    2012-08-01

    This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It was presented in an Union of Concerned Scientists webinar on June 12, 2012.

  15. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Hand, M. M.

    2012-08-01

    This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It was presented in a webinar given by the California Energy Commission.

  16. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Mai, T.

    2012-08-01

    This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It was presented in a Power Systems Engineering Research Center webinar on September 4, 2012.

  17. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Hand, M.

    2012-10-01

    This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It is being presented at the Utility Variable-Generation Integration Group Fall Technical Workshop on October 24, 2012.

  18. Control the Present

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Control the Present Image of water sampling trip embarking downstream from Otowi Bridge onto the Rio Grande with text overlay of 'How does LANL minimize the impacts from ongoing activities?' Control the Present Home Integrating Environmental Stewardship Something in the air? Protections: Sediment Protections: Sampling

  19. River Corridor Closure Contract Section J, Attachment J-10

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Contract No. DE-AC06-05RL14655 A000 1 SECTION J, ATTACHMENT J-10 RCC SUBCONTRACTS EXISTING AT TIME OF SOLICITATION The following subcontracts are/were available for assignment to the Contractor at the time Solicitation No. DE-RP06-04RL14655 was issued: End Date Current Value Description Supplier 02/28/05 $ 5,994,091 100 B/C AREA PIPELINES RCI ENVIRONMENTAL, INC. 10/31/06 $ 1,324,615 100-BC BURIAL GROUNDS AND REMAINING SITES FEDERAL ENGINEERS & CONSTRUCTORS 12/31/05 $ 3,400,000 116-N-1 CRIB

  20. River Corridor Closure Contract Section J, Attachment J-11

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Contract No. DE-AC06-05RL14655 Modification 398 1 SECTION J, ATTACHMENT J-11 RCC FUNDING PROFILE In accordance with the Section B clause entitled Changes to Target Cost, Target Fee, and Schedule, the following is the projected funding profile for this Contract: Fiscal Year Annual Budget Authority ($1M)* Cumulative Budget Authority ($1M)* 2005** $ 107** $ 107 2006 183 290 2007 212 502 2008 232 734 2009 242 976 2010 297 1,273 2011 376 1,649 2012 302 1,951 2013 300 2,251 2014 280 2,531 2015 201

  1. River Corridor Closure Contract Section J, Attachment J-4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Contract No. DE-AC06-05RL14655 A000 SECTION J, ATTACHMENT J-4 SMALL BUSINESS SUBCONTRACTING PLAN The Washington Closure LLC Small Business Subcontracting Plan is on file at the Richland Operations Office and will be available at www.hanford.gov/rl The Washington Smalll Business Subcontracting Goals are as follows (as a percent of total subcontracting effort): Small Business (SB): 65.0% Small Disadvantaged Business: 22.0% Women-Owned SB: 13.0% HUBZone SB: 4.5% Veteran-Owned SB: 3.0%

  2. River Corridor Closure Contract Section J, Attachment J-5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Contract No. DE-AC06-05RL14655 A000 1 SECTION J, ATTACHMENT J-5 SMALL DISADVANTAGED BUSINESS PARTICIPATION PROGRAM TARGETS (A) Washington Closure NAICS Code Description of NAICS Major Group SDB Dollars Percentage** Subtotal (B) Subcontractors NAICS Code Description of NAICS Major Group SDB Dollars Percentage** 238 Specialty Trade Contractors 37,352,000 1.92 423 Merchant Wholesalers, Durable Goods* 43,104,000 2.21 541 Professional, scientific, & tech srvcs* 13,931,000 0.72 562 Waste mgt

  3. River Corridor Closure Contract Section J, Attachment J-15

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Contract No. DE-AC06-08RL14655 Modification 214 1 ATTACHMENT J-15 STANDARDIZED TRAINING AND COMMON SAFETY PROCESSES Document No. Worker Safety Requirement Procedure Status WCH Participation Authorized DOE-0336, Rev. 1 Hanford Site Lockout-Tagout Procedure [as required by 29 CFR 1910.147, CRD O 5480.19 (Chg. 2 Chapter IX and Rev.3), Conduct of Operations Requirements for DOE Facilities] Completed Rev. 1 (Reference MSA- 1002489, 9/2/10) Approved by DOE-RL on 11/10/10 (Reference 11-OOD- 0007) Yes

  4. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    E, Page 1 SECTION L ATTACHMENT E PAST PERFORMANCE INFORMATION FORM 1. Complete Name of Offeror or Team Member 2. Contract Title and Location 3. Customer Name, Current Address, Telephone Number and E-mail 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date the Work was Completed 8. Initial Contract Price /Estimated Cost and Fee 9. Final Amount Invoiced/Amount Invoiced to Date 10a. Technical Point of Contact (see instruction below) 10b. Contracting

  5. Attachment L-2a Relevant Corporate Experience Form

    National Nuclear Security Administration (NNSA)

    [Submit in Volume II, TAB 1] DE-SOL-0008449 Attachment L-2a Relevant Corporate Experience Form 1) Experience Submission Number: (Start with 1 and number consecutively) 2). Name and Address of Offeror or Team Member 3. Complete Name/Title of Contract and Location/Address of project/contract 3. Project Owner Name and Address 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date Work Ended 8. Initial Contract Price/Cost and Fee 9. Final Amount

  6. PART III -LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    E SECTION J APPENDIX E PERFORMANCE GUARANTEE AGREEMENT(S) [Note: To be inserted by the Contracting Officer prior to contract award. For Performance Guarantee Agreement(s) template, see Section L, Attachment A.]

    I SECTION J APPENDIX I SMALL BUSINESS SUBCONTRACTING PLAN [Note: To be inserted by the Contracting Officer prior to

    J, Page 1 SECTION J APPENDIX J DIVERSITY PLAN GUIDANCE In accordance with Section I clause DEAR 970.5226-1, Diversity Plan, this Appendix provides guidance to

  7. PART III -LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-6-1 Attachment J-6 -- Government-Furnished Property (GFP) Inventory Identifier Official Name Manufacturer Model Site Stlv1 Stlv2 WC45089 BOOTH INDUSTRIAL ACOUSTIC BOOTH RCHN 1979SNYDER 142 WC54531 EXAM TABLE MIDMARK 411 200W 2719WB W23 WC54532 EXAM TABLE MIDMARK 411 200W 2719WB W24 WC54533 EXAM TABLE MIDMARK 411 RCHN 1979SNYDER 112 WC54534 EXAM TABLE MIDMARK 411 200W 2719WB W25 WC54535 EXAM TABLE MIDMARK 411 RCHN 1979SNYDER 125 WC54536 EXAM TABLE MIDMARK 411 RCHN 1979SNYDER 123 WC54537 EXAM

  8. Publications and Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News & Publications » Publications and Presentations News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Contact Us Media Jon Bashor, jbashor@lbl.gov, +1 510 486 5849 or Media@es.net Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net Publications and Presentations Sort by: Date

  9. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Hand, M. M.

    2012-09-01

    This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

  10. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Mai, T.

    2012-11-01

    This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

  11. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Mai, T.

    2013-04-01

    This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

  12. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Mai, T.

    2012-10-01

    This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

  13. Presentations for Industry

    Office of Energy Efficiency and Renewable Energy (EERE)

    Industrial energy managers, utilities, and energy management professionals can find online trainings and information dissemination at no-cost. AMO has provided these energy-saving strategies from leading manufacturing companies and energy experts through several different presentation series.

  14. Hydrogen Fuel Quality (Presentation)

    SciTech Connect (OSTI)

    Ohi, J.

    2007-05-17

    Jim Ohi of NREL's presentation on Hydrogen Fuel Quality at the 2007 DOE Hydrogen Program Annual Merit Review and Peer Evaluation on May 15-18, 2007 in Arlington, Virginia.

  15. Solar Data Hub (Presentation)

    SciTech Connect (OSTI)

    Orwig, K.

    2011-04-01

    As power grid integration of renewables becomes ever more important and detailed, the need for a centralized place for solar-related resource data is needed. This presentation describes such a place and website.

  16. Control the Present

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Control the Present Image of water sampling trip embarking downstream from Otowi Bridge onto the Rio Grande with text overlay of 'How does LANL minimize the impacts from ongoing...

  17. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Min Agenda Topic Presenter 10:00 5 Review Agenda Mary Hawken 10:05 15 CFO Spotlight Javier Fernandez Financial Highlights 10:20 30 Review of 1st Quarter Financial Results...

  18. Papers & Presentations- 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hohlraum Glint and Laser Pre-pulse Detector for NIF Experiments Mike Dunne Presents Plenary Talk at Optics+Photonics Conference July Reduced Instability Growth with High-adiabat ...

  19. Biomass Program Overview Presentation

    SciTech Connect (OSTI)

    2011-12-01

    This presentation is an interactive walk through of the Program's vision of advancing the biofuels and bioproducts industry and highlights the research and development activities that will help achieve it.

  20. NUG 2014 Training Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training Presentations NUG 2014 Training Presentations Sort by: Default | Name | Date (low-high) | Date (high-low) | Source | Category New User Training: Introduction to NERSC February 3, 2014 | Author(s): Harvey Wasserman, NERSC | Download File: 01-NERSCIntro-NUG2014.pdf | pdf | 11 MB New User Training: Introduction to NERSC Accounts and Allocations February 3, 2014 | Author(s): David Turner, NERSC | Download File: 02-AccountsAllocations-NUG2014.pdf | pdf | 988 KB Connecting to NERSC February

  1. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Hand, M. M.

    2012-08-01

    This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It was presented to the 2012 Western Conference of Public Service Commissioners, during their June, 2012, meeting. The Western Conference of Public Service Commissioners is a regional association within the National Association of Regulatory Utility Commissioners (NARUC).

  2. LAPD 2013 presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations at LAPD-16 Title Presenter Application of a dispersion interferometer using a ratio of modulation amplitudes to LHD and future prospects T. Akiyama Laser-spectroscopic electric field measurements in ans-pulsed microplasma in nitrogen P. Boehm Thomson scattering on COMPASS tokamak plasma edge profile P. Bohm Atomic bromine density measurements in HBr inductively coupled plasma by two-photon absorption laser-induced fluorescence J-P. Booth Density Fluctuation Measurement using

  3. ARM - Meetings and Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Meetings and Presentations Related Links MC3E Home News News & Press MC3E Backgrounder (PDF, 1.61MB) SGP Images ARM flickr site Field Blog ARM Data Discovery Browse Data Deployment Operations Measurements Science Plan (PDF, 3.85 MB) Featured Data Plots SGP Data Plots (all) Experiment Planning Steering Committee Science Questions MC3E Proposal Abstract and Related Campaigns Meetings Cloud Life Cycle Working Group Contacts Michael Jensen, Lead Scientist Meetings and Presentations Next Meeting:

  4. HEP Exascale Review Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations HEP Exascale Review Presentations Sort by: Default | Name | Date (low-high) | Date (high-low) | Source | Category HEP Requirements Review June 10, 2015 | Author(s): Barbara Helland, DOE ASCR | Download File: RequirementsreviewsHellandV3150610.pdf | pdf | 2.1 MB Opening Remarks June 10, 2015 | Author(s): Rob Roser, Salman Habib, Richard Gerber | Download File: HEP-ASCR-Exascale-opening-remarkssh.pdf | pdf | 187 KB P5 Science Drivers: Accelerator Experiments June 10, 2015 |

  5. Blade Testing Trends (Presentation)

    SciTech Connect (OSTI)

    Desmond, M.

    2014-08-01

    As an invited guest speaker, Michael Desmond presented on NREL's NWTC structural testing methods and capabilities at the 2014 Sandia Blade Workshop held on August 26-28, 2014 in Albuquerque, NM. Although dynamometer and field testing capabilities were mentioned, the presentation focused primarily on wind turbine blade testing, including descriptions and capabilities for accredited certification testing, historical methodology and technology deployment, and current research and development activities.

  6. MaRIE Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MaRIE Presentations MaRIE Presentations MaRIE will provide a capability to address the control of performance and production of weapons materials at the mesoscale. MaRIE fills a critical gap in length scale between the integral scale addressed by studies conducted at DARHT, U1a, NIF, and Z. MaRIE 1.0 Matter Radiation Interactions in Extremes 1.0 70th Anniversary (pdf) July 27, 2013

  7. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2-000 VERA-CS Development Progress Presented by Scott Palmtag Physics Integration (PHI) CASL Industry Council Meeting Greenville, SC April 12-13, 2016 2 CASL-U-2016-1082-000 Overview * VERA-CS Description * Performance Improvements * Thermal Expansion * Library Validation * Transient Development Status * To be discussed in other presentations: - BWR Plans - Test Stands - VERAView Post-processing Focus this year is to optimize performance (reduce run times) and make the code more robust 3

  8. ALGERIAN AFIS SOLUTION PRESENTATION

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3/2011 1 17 Feb 2010 HAB Presentation Hanford Tank Closure & Waste Management [TC&WM] EIS External Independent Review Team Preliminary Assessment Report HAB 2-17-2010 Presentation - Contract # 046-007-000 KD Auclair & Associates, LLC 1/3/2011 2 AGENDA  Introductions  Overview of KD Auclair & Associates, LLC  Background  Scope of Work  Method and Approach  Current Status - Work Remaining  Preliminary Observations and Conclusions  Recommendations  EIS

  9. Cladding Attachment Over Thick Exterior Insulating Sheathing (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-11-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of wood-framed walls and mass masonry wall assemblies. The location of the insulation on the exterior of the structure has many direct benefits, including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased airtightness and improved water management. For thick layers of exterior insulation (more than 1.5 in.), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location. Although the approach has proven effective, there is significant resistance to its widespread implementation due to a lack of research and understanding of the mechanisms involved in the development of the vertical displacement resistance capacity. In addition, the long-term in-service performance of the system has been questioned due to potential creep effects of the assembly under the sustained dead load of the cladding and effects of varying environmental conditions. In addition, the current International Building Code (IBC) and International Residential Code (IRC) do not have a provision that specifically allows this assembly.

  10. Predicting Envelope Leakage in Attached Dwellings (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-11-01

    The most common method of measuring air leakage is to perform single (or solo) blower door pressurization and/or depressurization test. In detached housing, the single blower door test measures leakage to the outside. In attached housing, however, this "solo" test method measures both air leakage to the outside and air leakage between adjacent units through common surfaces. Although minimizing leakage to neighboring units is highly recommended to avoid indoor air quality issues between units, reduce pressure differentials between units, and control stack effect, the energy benefits of air sealing can be significantly overpredicted if the solo air leakage number is used in the energy analysis. Guarded blower door testing is more appropriate for isolating and measuring leakage to the outside in attached housing. This method uses multiple blower doors to depressurize adjacent spaces to the same level as the unit being tested. Maintaining a neutral pressure across common walls, ceilings, and floors acts as a "guard" against air leakage between units. The resulting measured air leakage in the test unit is only air leakage to the outside. Although preferred for assessing energy impacts, the challenges of performing guarded testing can be daunting.

  11. DE-EM-0001971 WIPP M&O J-22 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    22 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT E: PERFORMANCE GUARANTEE AGREEMENT (Performance Guarantee Agreements dated, August 17, 2012 is hereby incorporated

  12. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    DeMeo, E.

    2012-08-01

    This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It was presented at Wind Powering America States Summit. The Summit, which follows the American Wind Energy Association's (AWEA's) annual WINDPOWER Conference and Exhibition, provides state Wind Working Groups, state energy officials, U.S. Energy Department and national laboratory representatives, and professional and institutional partners an opportunity to review successes, opportunities, and challenges for wind energy and plan future collaboration.

  13. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Mai, T.

    2012-08-01

    This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It was presented at the 2012 RE AMP Annual Meeting. RE-AMP is an active network of 144 nonprofits and foundations across eight Midwestern states working on climate change and energy policy with the goal of reducing global warming pollution economy-wide 80% by 2050.

  14. Papers and Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    papers presentations Papers and Presentations Could Capsule 'Shims' Enhance NIF Implosions? Sometimes a carpenter's best friend is a shim-a narrow, wedge-shaped piece of wood or plastic that can be used to close a gap when components are out of plumb or don't quite fit together. LLNL researchers are looking into a similar technique to try to close the gap between the expected performance of NIF implosions, in terms of neutron yield or energy produced, and the results of experiments to date. In a

  15. PowerPoint Presentation

    Broader source: Energy.gov (indexed) [DOE]

    Past R2R Processing Successes at ORNL and Current/Future Opportunities Presented by Dr. David L. Wood, III Roll-to-Roll Manufacturing Team Lead & Fuel Cell Technologies Program Manager Oak Ridge National Laboratory Presented to AMO HV R2R Workshop Alexandria, VA 12/2/15 2 AMO HV R2R Workshop, 12/2/15, David Wood ORNL Is Addressing R2R Processing Issues Relevant to Industry * Annealing of materials on temperature-sensitive substrates (solid-state lithium-ion cathodes for large-scale thin-film

  16. PowerPoint Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Laboratory Mentor-Protégé Program Business Success Stories Presented by Cassandra McGee Stuart ORNL Small Business Programs Office May 23, 2013 2 Presentation name Today, ORNL is DOE's largest science and energy laboratory 2 Managed by UT-Battelle for the U.S. Department of Energy $1.65B budget World's most intense neutron source 4,400 employees World-class research reactor 3,000 research guests annually $500M modernization investment Nation's largest materials research portfolio

  17. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Performance engineering workflow SCORE-P AND SCALASCA PERFORMANCE TOOLS TRAINING, NERSC, JULY 26, 2016 *Calculation of metrics *Identification of performance problems *Presentation of results *Modifications intended to eliminate/reduce performance problem *Collection of performance data *Aggregation of performance data *Prepare application with symbols *Insert extra code (probes/hooks) Preparation Measurement Analysis Optimization 2 VIRTUAL INSTITUTE - HIGH PRODUCTIVITY SUPERCOMPUTING Why

  18. General Presentation Template

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Steve Pfaff August 8, 2013 Safety Culture Improvement: Past, Present, and Future PAST  DNFSB Recommendation 2011-1, June 9, 2011, Safety Culture at the Waste Treatment and Immobilization Plant  "The investigative record demonstrates that both the DOE and contractor project management behaviors reinforce a subculture at WTP that deters the timely reporting, acknowledgement, and ultimate resolution of technical safety concerns." 2 PAST  HSS Assessment of Nuclear Safety Culture

  19. Papers and Presentations - 2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    april Papers and Presentations - 2015 April Rugby Hohlraums Join the Ignition Scrum Thinner Capsules Yield Faster Implosions Chris Barty Discusses the 'Nexawatt' Laser at SPIE Conference Near-Vacuum Hohlraums Show Promise NIF inertial confinement fusion (ICF) experiments typically have used plastic (CH) capsules inside gold hohlraums filled with helium at densities ranging from 0.96 to 1.6 mg/cm3. Conventional laser pulses on the order of 15 to 20 nanoseconds in length are needed to reach

  20. Papers and Presentations - 2016

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Papers and Presentations - 2016 July NIF Experiment Challenges Standard Ionization Models Measuring Instabilities in NIF Implosions at Peak Velocity 'Contact Lenses' for High-power Lasers May New Insights into Glass Polishing Toward a High-Energy Laser-Plasma Optical System April Two-Shock Experiments Tune Implosion Symmetry Researchers Examine Hydrogen Under High Pressure Nature Physics Paper Reviews NIF's Progress Toward Ignition March When Meteorites Create Diamonds Got Questions About NIF?

  1. ARM - Meetings and Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Meetings and Presentations Related Links RACORO Home AAF Home ARM Data Discovery Browse Data Post-Campaign Data Sets Data Guide (PDF, 1.4MB) Campaign Journal Flight Details Images ARM flickr site Deployment Operations Measurements Science & Operations Plan (PDF, 640K) SGP Data Plots RACORO wiki Login Required Experiment Planning Steering Committee Science Questions RACORO Proposal Abstract Full Proposal (PDF, 886K) Collaborations Meetings CLOWD Working Group News Discovery Channel Earth Live

  2. PowerPoint Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    STEM Volunteer Training: Volunteer Opportunities April 14, 2016 Names of Presenters Megan Davis Program Manager TechBridge Rabiah Mayas, Ph.D. Director of Science and Integrated Strategies Museum of Science and Industry Chicago Karen Peterson CEO National Girls Collaborative Project Rosa Moreno Senior Policy Advisor, Partnerships Corporation for National & Community Service 2 Agenda You are on mute! Use your webinar bar to fill out poll, send a chat or send in a question. Please tell us via

  3. Tran_Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    acid media into a deep eutectic solvent using bis(2-ethylhexyl) phosphate Presented by: Kate Tran, Eastern Kentucky University Merinda Volia, Department of Nuclear Engineering, Texas A&M University Dr. Evgeny Tereshatov, Cyclotron Institute, Texas A&M University Advisor: Dr. Charles Folden III, Cyclotron Institute, Texas A&M University Introduction * Chemical properties of superheavy elements (Z > 108) are relatively unknown, with exception of element 112 * Preliminary research

  4. PowerPoint Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Laboratory Priorities Presentation to the Commission to Review the Effectiveness of the National Energy Laboratories Dr. David T. Danielson September 15, 2014 2 DOE Mission: Enhance U.S. security and economic growth through transformative science, technology innovation, and market solutions to meet our energy and environmental challenges Goal 1: Science and Energy Goal 3: Management and Performance Goal 2: Nuclear Security Goal 1: Science and Energy Goal 3: Management and Performance Goal 2:

  5. PowerPoint Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Caterpillar: Non-Confidential GAS TURBINES IN SUPPORT OF GRID MODERNIZATION 10 FEBRUARY 2016 Presented by: Uwe Schmiemann PG Marketing & Product Strategy Manager Solar Turbines Incorporated 2 SOLAR TURBINES INCORPORATED  World's Largest Manufacturer of Industrial Gas Turbines (1 to 22 MW)  Over 15,000 Gas Turbines Sold  Over 6,000 Gas Compressors Sold  Installations in over 100 Countries  Direct End-to-End Sales & Service  More than 2 Billion Fleet Operating Hours 

  6. PowerPoint Presentation

    U.S. Energy Information Administration (EIA) Indexed Site

    Standardization of Energy Efficiency Information: The Northeast Regional Perspective Presented to EIA Energy Conference July 11, 2016 About NEEP 1 Mission Accelerate energy efficiency as an essential part of demand-side solutions that enable a sustainable regional energy system Approach Overcome barriers and transform markets via Collaboration, Education and Enterprise Vision Region embraces next generation energy efficiency as a core strategy to meet energy needs in a carbon-constrained world

  7. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    System Integrated Project Team One System | 1 Presentation to Hanford Advisory Board Tank Waste Committee Ben Harp, DOE-WTP Ray Skwarek, WRPS Rick Kacich, WTP October 10, 2012 Update  Last Time We Met - We were exploring the idea of One-System - Focusing on constructing to operate the WTP and associated facilities - Execute One System approach * Focus on integrating the TOC and WTP contract - Explore opportunity to begin operations of LAW * Operational risk reduction by starting lowest hazard

  8. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Upgrades to Engineering Controls, Administrative Controls, Worker Training, Industrial Hygiene Procedures, Occupational Medicine Programs and Oversight 2009-Present Improvements to the Occupational Health Program May 8, 2014 Brian Harkins, Acting Assistant Manager of Technical and Regulatory Support and Rich Urie, Industrial Hygiene Program Representative for Tank Farms 2 Engineering Controls in Place at the Tank Farms  Active ventilation, including portable exhausters and increased flow

  9. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dr. Isabelle Wheeler, Program Manager Tank Farm Projects - Waste Feed Delivery Systems Provision of a Tank Waste Characterization and Staging Capability at Hanford Presentation: March 12, 2014 2 Mission Need: Bridging the Capability Gap Provision of the needed connectivity between the Hanford Tank Farms (TF) and the Waste Treatment and Immobilization Plant (WTP) to bridge known performance gaps in the waste feed delivery and certification system that meets the WTP Waste Acceptance Criteria (WAC)

  10. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hanford Advisory Board Tank Waste Committee Low-Activity Waste Pretreatment System Presented by: Steve Pfaff - Federal Project Director November 13, 2014 2 2008 History  Interim Pretreatment System (IPS) alternatives analysis resulted in selection of cross-flow filtration and ion exchange - validated by an expert panel 2011 History  Critical Decision 1 Package, was submitted by Washington River Protection Solution in September 2011  Conceptual design was developed for both an in-tank

  11. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Act (NEPA) Implementing Procedures - Title 10, Code of Federal Regulations, Part 1021 * Determine the scope of the NEPA document * Conduct analysis to see if significant impacts would result from proposed action * Select preferred alternative * Prepare final NEPA document * Decide whether to prepare an EIS or issue a Finding of No Significant Impact National Historic Preservation Act (NHPA) - Section 106 * Identify whether Historic Properties are present in the area of potential effect *

  12. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Salishan Conference High Speed Computing April 23-27, 2007 Jeff Sonsalla Engineering Director SGI Design and Qualification of High Performance Computer Systems Presentation Overview * The correctness stack - View from the top down - Middle ground - a data digression - View from the bottom up * Trends and challenges * That was then...This is now Slide 2 Correctness Stack: View From Above * A problem is defined * A solution is expressed as a numerical algorithm - Equations are constructed in a

  13. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Challenges of the Use of HTS Materials for Fusion L. Bromberg MIT Plasma Science Fusion Center In collaboration J.V. Minervini, J.H. Schultz and the ARIES team Organization of talk * Brief status of HTS materials for magnets * Present HTS magnet development * Application of HTS materials to fusion - Motivation - Potential - Challenges * Conclusions Facts on Superconductors Three Critical Parameters: * Critical temperature, T c * Critical magnetic field, H c * Critical current density, J c

  14. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5-parameter PV Module Model Aron P. Dobos, NREL Presented at the 2013 Sandia PV Performance Modeling Workshop Santa Clara, CA. May 1-2, 2013 Published by Sandia National Laboratories with the permission of the author. 2 Outline 1. Quick review of single diode model 2. Automated method for estimating model parameters from STC measurements 3. Overview of CEC module database and related processes 3 Overview * Basic 5 parameter single diode model designed to predict module performance using only

  15. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cloud Life Cycle and Structure A.M. Vogelmann, E. Luke, M.P. Jensen, P. Kollias, Brookhaven National Laboratory, Upton, New York and E.R. Boer LUEBEC, San Diego, CA SUMMARY SUMMARY * * Cloud tracking using geostationary satellite data provides a context of the cloud state observed at the ARM Sites, including the cloud's life-cycle stage and its representativeness of the region. * * Examples are presented of the duration and paths of mesoscale convective systems within the Tropical Western

  16. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Simulations of Clouds and Boundary Layer Processes Image courtesy of Bjorn Stevens Yaosheng Chen, Pennsylvania State University Tobias Marke, University of Cologne Robert Schrom, Pennsylvania State University Hee-Jung Yang, University of Illinois Jianhao Zhang, University of Miami ARM Summer Training Final Presentation 24 July 2015 Motivation and Outline * What domains are needed to realistically simulate shallow cumulus? * What are the properties of the simulated cloud field? * What is the

  17. Short_Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reconciling Giant Resonance Data Ashton Short Mentor: Dr. Dave Youngblood Motivation * Giant Resonances are important because they tell us about bulk properties of the nucleus, such as its compression modulus. * While Gaussian fits are most common in the study of Giant Resonances, the group from Osaka University in Japan use either Lorentzian or Breit-Wigner fits. This presents a challenge when it comes to comparing results. * The Osaka group primarily publishes radiative strength distributions

  18. PowerPoint Presentation

    U.S. Energy Information Administration (EIA) Indexed Site

    William Gausman Sr. Vice President Asset Management & Planning DOE Energy Information Administration Washington, DC April 7, 2010 PHI's Smart Grid Vision and Investment Grant Awards 1 Presentation Overview * PHI Company overview * PHI's Smart Grid Vision * SGIG Awards - Scope, Costs, Benefits and Schedules * Distribution Automation * Key Next Steps 2 Combined Service Territory Transmission & Distribution Competitive Energy / Other Who is Pepco Holdings, Inc. PHI Investments 2 Regulated

  19. A possible oriented attachment growth mechanism for silver nanowire formation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Murph, Simona E. Hunyadi; Murphy, Catherine J.; Leach, Austin; Gall, Kenneth

    2015-04-06

    Electron microscopy studies suggest that silver nanowires prepared by an approach reported earlier by us (Caswell, K. K., Bender, C. M., Murphy, C. J. Nano Lett.,2003, 3, 667–669) form through a coarsening process via an oriented attachment mechanism. Initially, silver nucleation centers were produced by chemical reduction of silver ions in boiling water, with sodium citrate and sodium hydroxide as additives in solution. These nucleation centers, with a twinned crystallographic orientation, ultimately merge into fully grown silver nanowires. This is a completely different mechanism from the seed-mediated growth approach, which has also been used to produce silver nanowires. Furthermore, companionmore » molecular dynamics performed with the embedded atom method are in agreement with our experimental data.« less

  20. Microsoft Word - Attachment J.9, Appendix I Directives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    192 Part III, Section J, Appendix I J-I-1 ATTACHMENT J.9 APPENDIX I DOE DIRECTIVES/LIST B Applicable to the Operation of AMES Laboratory Contract No. DE-AC02-07CH11358 Contract No. DE-AC02-07CH11358 Contract Modification No. 0192 Part III, Section J, Appendix I NUMBER DATE TITLE J-I-2 O 130.1 09/29/95 Budget Formulation Process O 142.3A 10/14/10 Unclassified Foreign Visits and Assignments Program O 150.1A 03/31/14 Continuity Programs O 151.1C 11/02/05 Comprehensive Emergency Management System O

  1. A possible oriented attachment growth mechanism for silver nanowire formation

    SciTech Connect (OSTI)

    Murph, Simona E. Hunyadi; Murphy, Catherine J.; Leach, Austin; Gall, Kenneth

    2015-04-06

    Electron microscopy studies suggest that silver nanowires prepared by an approach reported earlier by us (Caswell, K. K., Bender, C. M., Murphy, C. J. Nano Lett.,2003, 3, 667–669) form through a coarsening process via an oriented attachment mechanism. Initially, silver nucleation centers were produced by chemical reduction of silver ions in boiling water, with sodium citrate and sodium hydroxide as additives in solution. These nucleation centers, with a twinned crystallographic orientation, ultimately merge into fully grown silver nanowires. This is a completely different mechanism from the seed-mediated growth approach, which has also been used to produce silver nanowires. Furthermore, companion molecular dynamics performed with the embedded atom method are in agreement with our experimental data.

  2. Underground coal gasification. Presentations

    SciTech Connect (OSTI)

    2007-07-01

    The 8 presentations are: underground coal gasification (UCG) and the possibilities for carbon management (J. Friedmann); comparing the economics of UCG with surface gasification technologies (E. Redman); Eskom develops UCG technology project (C. Gross); development and future of UCG in the Asian region (L. Walker); economically developing vast deep Powder River Basin coals with UCG (S. Morzenti); effectively managing UCG environmental issues (E. Burton); demonstrating modelling complexity of environmental risk management; and UCG research at the University of Queensland, Australia (A.Y. Klimenko).

  3. Papers and Presentations - 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 / december Papers and Presentations - 2014 December Studying Ion Kinetic Effects in NIF Implosions The results of an investigation of the role of kinetic and multi-ion effects on NIF implosions were reported in a Physics of Plasmas paper published online on Dec. 29. The research focused on shock-driven deuterium (D2) and deuterium-helium-three (D3He) gas-filled "exploding-pusher" inertial confinement fusion (ICF) implosions at NIF to assess the impact of ion kinetic effects.

  4. ARM - Meetings and Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Meetings and Presentations Related Links amie.png 34h AMIE Home cindy.png 50h CINDY2011 dynamo.png 34h DYNAMO ARM Data Discovery Browse Data Outreach News & Press Blog Backgrounder (PDF, 1.2MB) Education Flyer (PDF, 2.0MB) Images ARM flickr site Official AMIE Logo AMIE Gear Experiment Planning Steering Committee AMIE-MANUS Proposal Abstract AMIE-GAN Proposal Abstract Meetings Cloud Life Cycle Working Group Deployment Operations Science Plan - TWP Manus Site (PDF, 2.1 MB) Science Plan - Gan

  5. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Port and Integrate Base- line WEC Codes into VERA/LIME - VRI Physics Simulation Suite Project Rod Schmidt Sandia National Laboratory January 12, 2011 CASL-U-2010-0018-000 Nuclear Energy CASL-U-2010-0018-000 Level 1 Milestone: CASL.Y1.01 Port and Integrate Base-line WEC Codes into VERA/LIME VRI Physics Simulation Suite Project Presented by: Rod Schmidt, SNL with: Chris Baker and John Turner: ORNL Ross Bartlett, Noel Belcourt, Roger Pawlowski: SNL David Paterline, Pete Hilton and Brian Coulter:

  6. PowerPoint Presentation

    Office of Environmental Management (EM)

    Ground Water Issues Presentation for DOE Tritium Focus Group May 5-6, 2015 Steven M. Garry, CHP US Nuclear Regulatory Commission NRR/DRA/ARCB Tritium Leaks * Approximately 70% of plants have had some leakage, a list of plants with leaks is on NRC public web site - http://www.nrc.gov/reactors/operating/ops-experience/tritium/list-leaks-spills.pdf * Most leaks are from non-safety related, underground piping - onsite groundwater contamination up to 19 million pCi/L - No tritium from leaks detected

  7. PowerPoint Presentation

    Office of Environmental Management (EM)

    5 th Tritium Focus Group (TFG) meeting PPPL, NJ 05/05 - 05/06/2015 Presentation Outline Background: SBIR solicitation language Current research activities: * Status and progress of the SBIR solicitation and funded R&D: * Nano-engineered solid tritium breeder fuel by a small business in California. $150K (FY12)+ $1M (FY13-FY14). * Numerical simulation of fluid flow under Magneto-Hydro-Dynamic (MHD) influence. * International Collaborations. Challenges/Issues: * Should a FES-funded University

  8. PowerPoint Presentation

    Office of Environmental Management (EM)

    SRNL Mo-99 Technical Support for SHINE TM Discussion on Tritiated Waste Disposition Pathways for Commercial Entities Nancy Halverson SRNL Presentation for Tritium Focus Group Meeting Los Alamos, NM November 3, 2015 SRNL-L2100-2015-00098 Background - Molybdenum-99 ( 99 Mo or "moly") * "Molybdenum-99 is the parent isotope of technetium-99m ( 99m Tc) - 99 Mo is loaded into 99m Tc generator and is produced by 99 Mo decay - 99m Tc is extracted (by radiopharmacy staff) for use in

  9. PowerPoint Presentation

    Broader source: Energy.gov (indexed) [DOE]

    Update on BOEM Lower 48 Assessment Matthew Frye BOEM - Herndon, VA 6 June 2013 Update on BOEM Lower 48 Assessment A presentation to the Methane Hydrate Advisory Committee Matthew Frye Resource Evaluation Division BOEM - Herndon, VA matt.frye@boem.gov 6 June 2013 BOEM Resource Evaluation Division gas hydrate webpage: http://www.boem.gov/Oil-and-Gas-Energy-Program/Resource- Evaluation/Gas-Hydrates/index.aspx Update on BOEM Lower 48 Assessment Matthew Frye BOEM - Herndon, VA 6 June 2013 Update on

  10. PowerPoint Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FY 2016 National Laboratory Call for Proposals and Merit Review (BTOLMR1600000) Informational Webinar February 6, 2015 2 Expected Schedule Activity Date Lab Call Released Feb 2, 2015 Informational Webinar Feb 6, 2015, 2 - 4 PM ET Letters of Intent Due (submitted to EERE Exchange) Feb 17, 2015, 5 PM ET Proposals Due (submitted to EERE Exchange) Mar 13, 2015, 5 PM ET Reviewers' Initial Comments Due Apr 1, 2015, 5 PM ET Presentations Due (submitted to BTOLabCallFY16-18@EE.DOE.Gov) Apr 8, 2015, 5

  11. PowerPoint Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    sunshot energy.gov/sunshot Incubator Awardee Showcase Quick Pitches from Solar Companies March 4, 2015 Monica Andrews and Garrett Nilsen Solar Energy Technologies Office energy.gov/sunshot Before we begin: * If you are a presenter, click on the "raise hand" feature in the webinar * All attendees will be muted * Please enter questions into the chat box or email SunShot.Incubator@ee.doe.gov to request more information energy.gov/sunshot SunShot Incubator Awardee Showcase * Learn about

  12. PowerPoint Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FY 2017 National Laboratory Call for Proposals and Merit Review (BTOLMR0001719) Informational Webinar February 6, 2015 2 Expected Schedule Activity Date Lab Call Released Feb 4, 2016 Informational Webinar Feb 10, 2016, 12:30PM ET Letters of Intent Due (submitted to EERE Exchange) Feb 16, 2016, 5 PM ET Proposals Due (submitted to EERE Exchange) Mar 7, 2016, 5 PM ET Reviewers' Initial Comments Due Mar 23, 2016, 5 PM ET Presentations Due (submitted to BTOLabCallFY16-18@EE.DOE.Gov) Mar 30, 2016, 5

  13. PowerPoint Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Presentation * CAES Aquifer Technology * Geological Framework of Iowa * Dallas Center Structure * Results of CAES Feasibility Simulation * ISEP CAES Development Plan How Does CAES Work? CAES Turbo-Machinery Operating Requirements Equipment Manufacturer Plant Size (MW) Min. Inlet Pressure (psi) Min. Flow Rate (lbs/MW/hr) Total Min. Flow Rate (lb/hr) Allison 15 200 9500 142,500 MAN Turbo 50 50 9500 475,000 Dresser Rand 134 830 9500 1,273,000 Alston 300 900 9500 2,850,000 Westinghouse (501D5) 350

  14. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Howieson, Issue Manager Presentation Sept. 4, 2013 Public Comment Period: July 15 - August 16, 2013 Public Meetings: Tuesday, July 30, 2013 5:30 - 8:30 p.m. Richland Public Library 955 Northgate Drive Richland, WA Wednesday, July 31, 2013 6-9p.m. University Heights Center 5031 University Way NE Seattle, WA Thursday, August 8, 2013 6-9p.m. Best Western Hotel 1108 E Marina Dr. Hood River, OR Methods Contaminated soil removal, referred to as removal, treatment, and disposal (RTD) Monitored Natural

  15. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Scalasca Performance Tools Training http://www.nersc.gov/users/training/events/scorep-and-scalasca Christian Feld Jülich Supercomputing Centre David Böhme Lawrence Livermore National Lab VIRTUAL INSTITUTE - HIGH PRODUCTIVITY SUPERCOMPUTING Agenda Time Topic Presenter 09:00 Welcome Yang 09:10 Introduction to VI-HPS & overview of tools Feld Introduction to parallel performance engineering Building and running NPB-MZ-MPI/BT-MZ on Cori Instrumentation & measurement with Score-P 11:00

  16. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0, 2015 HPCToolkit Basic Features * Run application natively and every 100-200 times per second, interrupt program and record snapshot of call stack and then combine these into a calling context tree (CCT). * Combine sampling data with a static analysis of the program structure: loops, inline functions, etc. * Present top-down, bottom-up and flat views of calling context tree (CCT) and time-sequence trace view. Metrics are displayed per source line in the context of their call path. * Can sample

  17. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4974 1 Introducing SAM (Sun and Aureole Measurement), a New, Ground-based Capability for Measuring Cloud Optical Properties Presented to Cloud Properties Working Group IRF Working Group ARM Science Team Meeting John DeVore (devore@visidyne.com) A.T. Stair (ats@visidyne.com) Bob McClatchey 1 (RMcClatchey@msn.com) Visidyne, Inc. 781-273-2820 March 2006 1 Consultant VI-4974 2 Space-Based Sun-Tracking Zenith-Viewing Cirrus (Ice Columns) Solar elevation = 45 deg Sat depression = 45 deg Surface albedo

  18. Energy Week presentations

    SciTech Connect (OSTI)

    2006-07-01

    Topics covered include: energy security; clean energy and low carbon; energy for growth and poverty reduction in Africa; financing of energy efficiency; SMEs for decentralised energy service provision; potential for biofuels in developing countries; clean energy and sustainable development; clean energy finance and private equity funds; power generation and low carbon technologies; beyond traditional finance; rehabilitation and emission control in thermal power plants; and carbon finance. The presentations are mainly in ppt (Power Point) or pdf (Acrobat) format. Some videos of the conference are also available on the website.

  19. Attachment 2: Solicitation for Offers with New and Revised Green Lease Text

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Solicitation for Offers Paragraphs with New and Revised Green Lease Text (101.59 KB) More Documents & Publications Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 4: Unrevised SFO Paragraphs Reissued Green Lease Policies and Procedures for Lease Acquisition

  20. Attachment 5 Volume II Pricing Matrix.xls | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Attachment 5 Volume II Pricing Matrix.xls&0; More Documents & Publications Microsoft Word - FY07AnnualReport.doc CX-005455: Categorical Exclusion Determination Microsoft Word -...

  1. Attachment L-7b Vietnam Design Requirements Document is an Official

    National Nuclear Security Administration (NNSA)

    b Vietnam Design Requirements Document is an Official Use Only document please see Section ... The Government considers the Vietnam Design Requirements Document, Attachment L-7b an ...

  2. Mechanisms of Oriented Attachment of TiO2 Nanocrystals in Vacuum...

    Office of Scientific and Technical Information (OSTI)

    Mechanisms of Oriented Attachment of TiO2 Nanocrystals in Vacuum and Humid Environments: Reactive Molecular Dynamics Citation Details In-Document Search Title: Mechanisms of ...

  3. Attachment A: AIP Program Principles (Questions and Answers 1-12)

    Broader source: Energy.gov [DOE]

    This attachment contains twelve questions and answers that designate the mandatory AIP provisions that shall be included in new and renegotiated agreements and discusses the principles underlying...

  4. T-534: Vulnerability in the PDF distiller of the BlackBerry Attachment...

    Broader source: Energy.gov (indexed) [DOE]

    PROBLEM: Vulnerability in the PDF distiller of the BlackBerry Attachment Service for the BlackBerry Enterprise Server. PLATFORM: * BlackBerry Enterprise Server Express version...

  5. Microsoft PowerPoint - Window_Attachments-Webinar-Oct_28_2015...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... that examined 11 different typical residential window attachments including: - shades - ... window. * Energy-efficient window coverings can reduce heat loss through windows ...

  6. DE-EM-0001971 WIPP M&O J-i PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    i PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J LIST OF ATTACHMENTS Table of Content ATTACHMENT A: LAWS, REGULATIONS, AND DIRECTIVES (DEC 2000) ............ 1 ATTACHMENT B: SMALL, SMALL DISADVANTAGED, AND WOMEN-OWNED SMALL BUSINESS SUBCONTRACTING PLAN ......................... 7 ATTACHMENT C: DRAFT PERFORMANCE EVALUATION AND MEASUREMENT PLAN (PEMP) .............................................................................. 8 ATTACHMENT D: SPECIAL FINANCIAL INSTITUTION

  7. Porous expandable device for attachment to bone tissue

    DOE Patents [OSTI]

    Rybicki, Edmund F.; Wheeler, Kenneth Ray; Hulbert, Lewis E.; Karagianes, Manuel Tom; Hassler, Craig R.

    1977-01-01

    A device for attaching to substantially solid living bone tissue, comprising a body member having an outer surface shaped to fit approximately into an empty space in the tissue and having pores into which the tissue can grow to strengthen the bond between the device and the tissue, and adjustable means for expanding the body member against the tissue to an extent such as to provide a compressive stress capable of maintaining a snug and stable fit and of enhancing the growth of the tissue into the pores in the body member. The expanding means is adjustable to provide a stress between the tissue and the body member in the range of about 150 to 750 psi, typically 150 to 350 psi. Typically the body member comprises an expandable cylindrical portion having at least one radial slit extending longitudinally from a first end to the vicinity of the opposite (second) end thereof, at least one radial slit extending longitudinally from the second end to the vicinity of the first end thereof, and a tapered cylindrical hole extending coaxially from a wider circular opening in the first end to a narrower circular opening communicating with the second end.

  8. Attachment method for stacked integrated circuit (IC) chips

    DOE Patents [OSTI]

    Bernhardt, A.F.; Malba, V.

    1999-08-03

    An attachment method for stacked integrated circuit (IC) chips is disclosed. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM. 12 figs.

  9. Attachment method for stacked integrated circuit (IC) chips

    DOE Patents [OSTI]

    Bernhardt, Anthony F.; Malba, Vincent

    1999-01-01

    An attachment method for stacked integrated circuit (IC) chips. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM.

  10. Presented

    Office of Scientific and Technical Information (OSTI)

    Paul W. Cooper Sandia National Laboratories Albuquerque, New Mexico U.S.A. 87185-1156 ... or related to those of Naoum Oah.Naoum, Z ges Schiess-Sprenlzetoffw(sic), 27 June 1932). ...

  11. Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Mesh-Retrospective Bus: Good at board level, does not extend well * Transmission line ... Deeply scaled technologies Aging related faults Lack of burn-in? Variability increases ...

  12. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Clean and Efficient Combustion with Alternative Fuels Author(s): Jacqueline Chen, SNL | Download File: ChenCombustion.pdf | pdf | 30 MB Rational Catalyst Design for...

  13. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | ppt | 6.8 MB Goals for the next Greenbook February 22, 2001 | Author(s): Doug Rotman | Download File: Rotman.Greenbook.goals.ppt | ppt | 16 KB See also notes page for W....

  14. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    File Transfer Best Practices October 2, 2008 | Author(s): David Turner | Download File: turner.pdf | pdf | 197 KB Enabling Grid File Transfers: The NERSC CA October 2, 2008 | ...

  15. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    May 29, 2003 | Author(s): Richard Gerber | Download File: ... May 29, 2003 | Author(s): Bruce Cohen & W. M. Nevins | ... May 29, 2003 | Author(s): David Turner | Download File: ...

  16. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    May 29, 2003 | Author(s): Bruce Cohen & W. M. Nevins | ... May 29, 2003 | Author(s): David Turner | Download File: ... May 29, 2003 | Author(s): Richard Gerber | Download File: ...

  17. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    May 30, 2003 | Author(s): David Skinner | Download File: ... May 30, 2003 | Author(s): Richard Gerber | Download File: ... May 29, 2003 | Author(s): Bruce Cohen & W. M. Nevins | ...

  18. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Author(s): Bill Kramer | Report on Graphics Packages January 28, 1997 | Author(s): Stephen Lau, Nancy Johnston, Terry Ligocki | Download File: NERSC1.pdf | pdf | 85 KB Report...

  19. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Convention Center. Status of the ACTS Toolkit November 12, 2001 | Author(s): Osni Marques | NUG Meeting of November 12, 2001, in Denver, Colorado. The meeting coincides with...

  20. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with Plasmas and Targets (HEDLP and IFE) March 19, 2013 | Author(s): Alex Friedman, LLNL | Download File: Friedman-FESNERSC-2013slides-v1a.pdf | pdf | 13 MB Kinetic...

  1. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | 2.8 MB Climate Science for a Sustainable Energy Future September 11, 2012 | Author(s): David Bader | Download File: CSSEFBader.pdf | pdf | 21 MB Susan Gregurick (DOE) Download...

  2. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    File: profilingNUG08.pdf | pdf | 1.9 MB Debugging with DDT October 2, 2008 | Author(s): David Lecomber | Source: Allinea Software | Download File: DDT-lecomber.pdf | pdf | 1.1 MB...

  3. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment, Running Jobs, File Systems, Performance October 18, 2010 | Author(s): David Turner | Download File: Carver-Intro-Turner.pdf | pdf | 443 KB Introduction to MPI...

  4. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Susan Gregurick (DOE) Download File: September-2012-BER-NERSC-Overview.pdf | pdf | 2.2 MB Harvey Wasserman Download File: NERSC-IntroHarvey.pdf | pdf | 1.9 MB Case Study: Climate...

  5. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    server. The area of remote visualization is an ongoing research topic in the field of visualization. Typical remote visualization techniques have been of the brute force...

  6. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cameron Geddes: Plasma Accelerator Simulation Using Laser and Particle Beam Drivers Author(s): Cameron Geddes (LBNL) | Download File: Geddes-LPA.pdf | pdf | 7.5 MB Plasma...

  7. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New technical choice models in the Industrial Demand Module, with steel and paper results For 2016 EIA Conference July 12, 2016 | Washington, DC By Kelly Perl Team Leader, Industrial Energy Consumption and Efficiency Analysis Team Overview * Definitions - What is a process flow industry? - What is primary production? * AEO2016 cases * AEO2016 Industrial results for all industries * AEO2016 Steel Results: Energy consumption, Technology choice, and selected side cases * AEO2016 Paper results:

  8. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Download File: JacquardMPIandInterconnect.ppt | ppt | 125 KB Compiling: Pathscale Fortran, C, C++; mpif90, mpicc, mpicxx, recommended compiler options, useful compiler...

  9. Presented

    Office of Scientific and Technical Information (OSTI)

    a function of the conditions at which the test is run. This paper describes the various tests used, discusses the results of each test and makes detailed commentary on what the ...

  10. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Author(s): James Davenport, BES | Download File: DavenportNERSC-BES-10-8-2013.pdf | pdf | 12 MB Direct Numerical Simulation of the Poisson-Nernst-Planck Equation in Clay Author(s): ...

  11. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Author(s): Andrew Felmy, PNNL | Download File: Felmy.pdf | pdf | 7.1 MB Direct Numerical Simulation of the Poisson-Nernst-Planck Equation in Clay Author(s): Carl I. Steefel, LBNL | ...

  12. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bill Kramer | Tertiary Storage January 28, 1997 | Author(s): Keith Fitzgerald, Harvard Holmes | Download File: Tertiary-Storage.pdf | pdf | 173 KB Report on Graphics Packages...

  13. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IBM Compiler Optimization Options June 4, 2002 | Author(s): M. Stewart | Download File: optarg.ppt | ppt | 53 KB All of the IBM supplied compilers produce unoptimized code by...

  14. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    March 19, 2013 | Author(s): Alex Friedman, LLNL | Download File: Friedman-FESNERSC-2013slides-v1a.pdf | pdf | 13 MB Kinetic Modelling in ICF March 19, 2013 | Author(s): Chuang Ren, ...

  15. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    March 19, 2013 | Author(s): Alex Friedman, LLNL | Download File: ndcx40g.r6000res1280ipstep5faster.mov | mov | 26 MB Kinetic Modelling in ICF March 19, 2013 | Author(s): Chuang ...

  16. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1997 | Author(s): Bill Kramer | Tertiary Storage January 28, 1997 | Author(s): Keith Fitzgerald, Harvard Holmes | Download File: Tertiary-Storage.pdf | pdf | 173 KB Report on...

  17. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for Fields Movie March 19, 2013 | Author(s): Homa Karimabadi, UCSD | Download File: dtf.mpg | mpg | 5.5 MB Time Stepping for Particles Movie March 19, 2013 | Author(s): Homa...

  18. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Key Distribution Task Force (KDTF)--Chair: Bill Johnston, johnston@george.lbl.gov. Coordinates issues related to the deployment of secure keys to be used by e-mail technologies ...

  19. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November 27, 2012 | Author(s): James Siegrist | Download File: Siegrist-HEP-Overview.pdf | pdf | 3.7 MB Perspectives from High Energy Physics Steven Gottlieb: GPU & MIC for Lattice ...

  20. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November 27, 2012 | Author(s): James Siegrist | Download File: Siegrist-HEP-Overview.pdf | pdf | 3.7 MB Perspectives from High Energy Physics Julian Borrill: Cosmic Microwave ...

  1. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November 27, 2012 | Author(s): Barbara Helland | Download File: Helland.pdf | pdf | 5.5 MB NERSC-HEP Requirements Review James Siegrist: Perspectives from High Energy Physics ...

  2. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    James Siegrist: Perspectives from High Energy Physics November 27, 2012 | Author(s): James Siegrist | Download File: Siegrist-HEP-Overview.pdf | pdf | 3.7 MB Perspectives from High ...

  3. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Horst Simon | Scheduled for Monday, November 18, 2002 at the Marriot Inner Harbor Hotel West Ballroom, in Baltimore, Maryland. The meeting will coincide with SC2002, the...

  4. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research | Plans for NERSC's New Building February 3, 2012 | Author(s): Howard Walter, NERSC | Download File: CRT-NUG-120203.pdf | pdf | 7.3 MB User Requirements Gathered...

  5. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NUGEX Elections Charter Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821 ...

  6. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Category Performance Evaluation Activites at NERSC May 29, 2003 | Author(s): Adrian Wong | Download File: WongNERSCPerfEvalActivities.ppt | ppt | 195 KB Seaborg Code...

  7. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bill Kramer | Tertiary Storage January 28, 1997 | Author(s): Keith Fitzgerald, Harvard Holmes | Download File: Tertiary-Storage.pdf | pdf | 173 KB Report on Graphics...

  8. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forecasting Short-Term Crude Oil Prices EIA Workshop on Financial and Physical Oil market Linkages September 29, 2015 / Washington, D.C. By Rebecca George Office of Energy Markets and Financial Analysis Energy Information Administration Brent crude oil price forecast 2 Nominal dollars per barrel Note: This is not a Short-Term Energy Outlook projection Forecasting Crude Oil Prices - EIA Financial Workshop September 29, 2015 30 40 50 60 70 80 90 100 Brent spot Model Forecast EIA implementation of

  9. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    20th Century Reanalysis September 11, 2012 | Author(s): Gil Compo | Download File: Compo.pdf | pdf | 2.4 MB BER/NERSC Requirements Gathering Workshop September 11, 2012 | Author(s): Yukiko Sekine, DOE ASCR | Download File: YS-BER-NERSCWorkshopPresen2.pdf | pdf | 592 KB Case Study: Climate Change Simula2ons with the Community Earth System Model (CESM) September 11, 2012 | Author(s): Tom Bettge | Download File: Bettge.pdf | pdf | 8.2 MB Climate Science for a Sustainable Energy Future September 11,

  10. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Requirements Reviews Overview Author(s): David Goodwin, ASCR | Meeting Goals and Process Author(s): Richard Gerber | Download File: Gerber-Overview.pdf | pdf | 1.4 MB NERSC Ten-Year Strategy Author(s): Sudip Dosanjh, NERSC | Download File: SudipDosanjh.pdf | pdf | 19 MB Large Scale 3D Geophysical Inversion & Imaging Author(s): Gregory Newman, LBNL | Download File: Newman.pdf | pdf | 4.4 MB Computational Studies in Molecular Geochemistry Author(s): Andrew Felmy, PNNL | Download File:

  11. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Light Source (ALS) Author(s): Michael Banda, LBNL | Download File: BandaFinal.pdf | pdf | 1.9 MB Advanced Modeling for Next-Generation BES Accelerators Author(s): Robert Ryne, LBNL | Download File: RyneRevised.pdf | pdf | 5.6 MB Chemical reactivity, solvation and multicomponent heterogeneous processes in aqueous environments Author(s): Sotiris Xantheas, PNNL | Download File: SotirisXantheasRevised.pdf | pdf | 29 MB Computational Design of Novel Energy Materials Author(s): Yun Liu, MIT

  12. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ASCR Requirements Gathering March 19, 2013 | Author(s): David Goodwin, DOE ASCR | Download File: ASCR-Requirements-Gathering.pdf | pdf | 207 KB FES Program Summary & Status March 19, 2013 | Author(s): John Mandrekas, DOE FES | Download File: FES-NERSCMandrekas032013Final.pdf | pdf | 13 MB FES Review Overview and Goals March 19, 2013 | Author(s): Richard A. Gerber | Download File: Gerber-Overview.pdf | pdf | 1.4 MB Centre for Simulation of Wave-Plasma Interactions (CSWPI) March 19, 2013 |

  13. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Perspectives on Integrated Whole-Device Modeling at NERSC March 20, 2013 | Author(s): A. Y. Pankin, A. H. Kritz, and T. Rafiq | Download File: NerscIMpankin-2.pdf | pdf | 363 KB ASCR Requirements Gathering March 19, 2013 | Author(s): David Goodwin, DOE ASCR | Download File: ASCR-Requirements-Gathering.pdf | pdf | 207 KB FES Program Summary & Status March 19, 2013 | Author(s): John Mandrekas, DOE FES | Download File: FES-NERSCMandrekas032013Final.pdf | pdf | 13 MB FES Review Overview and

  14. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ASCR Requirements Gathering March 19, 2013 | Author(s): David Goodwin, DOE ASCR | Download File: ASCR-Requirements-Gathering.pdf | pdf | 207 KB Centre for Simulation of Wave-Plasma Interactions (CSWPI) March 19, 2013 | Author(s): Paul Bonoli, MIT | Download File: CSWPIPowerpointTemplate3v3.pdf | pdf | 432 KB Core Turbulence and Transport March 19, 2013 | Author(s): Jeff Candy, General Atomics | Download File: candy.pdf | pdf | 592 KB FES Program Summary & Status March 19, 2013 | Author(s):

  15. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cameron Geddes: Plasma Accelerator Simulation Using Laser and Particle Beam Drivers Author(s): Cameron Geddes (LBNL) | Download File: Geddes-LPA.pdf | pdf | 7.5 MB Plasma Accelerator Simulation Using Laser and Particle Beam Drivers James Siegrist: Perspectives from High Energy Physics November 27, 2012 | Author(s): James Siegrist | Download File: Siegrist-HEP-Overview.pdf | pdf | 3.7 MB Perspectives from High Energy Physics Steven Gottlieb: GPU & MIC for Lattice Field Theory November 27,

  16. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Meeting Goals & Process December 26, 2012 | Author(s): Harvey Wasserman | Download File: LogisticsHarveyWasserman.pdf | pdf | 1.3 MB Meeting Goals & Process James Siegrist: Perspectives from High Energy Physics November 27, 2012 | Author(s): James Siegrist | Download File: Siegrist-HEP-Overview.pdf | pdf | 3.7 MB Perspectives from High Energy Physics Steven Gottlieb: GPU & MIC for Lattice Field Theory November 27, 2012 | Author(s): Steven Gottlieb | Download File: LQCD-Gottlieb.pdf |

  17. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Andrew Connolly : The Large Synoptic Survey Telescope (LSST) November 27, 2012 | Author(s): Andrew Connolly (University of Washington) | Download File: LSST-Connolly.pdf | pdf | 3.9 MB The Large Synoptic Survey Telescope (LSST) Barbara Helland: NERSC-HEP Requirements Review November 27, 2012 | Author(s): Barbara Helland | Download File: Helland.pdf | pdf | 5.5 MB NERSC-HEP Requirements Review Cameron Geddes: Plasma Accelerator Simulation Using Laser and Particle Beam Drivers Author(s): Cameron

  18. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    James Siegrist: Perspectives from High Energy Physics November 27, 2012 | Author(s): James Siegrist | Download File: Siegrist-HEP-Overview.pdf | pdf | 3.7 MB Perspectives from High Energy Physics Steven Gottlieb: GPU & MIC for Lattice Field Theory November 27, 2012 | Author(s): Steven Gottlieb | Download File: LQCD-Gottlieb.pdf | pdf | 642 KB GPU & MIC for Lattice Field Theory Barbara Helland: NERSC-HEP Requirements Review November 27, 2012 | Author(s): Barbara Helland | Download File:

  19. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Report on Vectorization Application Review January 27, 1997 | Author(s): S.C. Jardin | Download File: Report-on-Vectorization-Application-Review.pdf | pdf | 93 KB State of NERSC address January 28, 1997 | Author(s): Horst SImon | Download File: State-of-NERSC-Address.pdf | pdf | 176 KB Report on Users' Questions about NERSC 1997 January 28, 1997 | Author(s): Ricky Kendall | Download File: Questions-for-the-ERSUG-Meeting.pdf | pdf | 80 KB Report on Graphics Packages January 28, 1997 | Author(s):

  20. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    State of NERSC address January 28, 1997 | Author(s): Horst SImon | Download File: State-of-NERSC-Address.pdf | pdf | 176 KB Report on Users' Questions about NERSC 1997 January 28, 1997 | Author(s): Ricky Kendall | Download File: Questions-for-the-ERSUG-Meeting.pdf | pdf | 80 KB Report on Graphics Packages January 28, 1997 | Author(s): Stephen Lau, Nancy Johnston, Terry Ligocki | Download File: NERSC1.pdf | pdf | 85 KB The Scientific Computing Group January 28, 1997 | Author(s): Tammy Welcome |

  1. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE 2000 January 28, 1997 | Author(s): Jim McGraw | Download File: DOE-2000.pdf | pdf | 48 KB Overview of NERSC at LBNL January 28, 1997 | Author(s): Bill Kramer | Report on Graphics Packages January 28, 1997 | Author(s): Stephen Lau, Nancy Johnston, Terry Ligocki | Download File: NERSC1.pdf | pdf | 85 KB Report on Graphics Packages January 28, 1997 | Author(s): Steve Lau | Report on Users' Questions about NERSC 1997 January 28, 1997 | Author(s): Ricky Kendall | Download File:

  2. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Introduction to the Cray T3E System April 28, 1999 | Author(s): Mark Durst | Download File: t3e.ppt | ppt | 233 KB This talk will introduce the Cray T3E system, mcurie.nersc.gov. We will describe the system hardware, available software, and common usage modes and methods. Introduction to the Cray J-90 System April 28, 1999 | Author(s): Tom DeBoni | Download File: J90IntroERSUG.ppt | ppt | 116 KB This talk will introduce the Cray J-90 systems. There are six such systems, five of which are

  3. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Introduction to the NERSC HPCF (High Performance Computing Facilities) June 7, 2000 | Author(s): Thomas M. DeBoni | Download File: IntroTalk.ppt | ppt | 228 KB This talk will briefly introduce the NERSC hardware and software of the computational systems, mass storage systems, and auxiliary servers. It will also touch on matters of usage, access, and information sources. The intent is to establish a baseline of knowledge for all attendees. The IBM SP, Evolution from Phase I to Phase II June 7,

  4. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Update on security issues with FTP June 3, 2002 | Author(s): NERSC staff | Download File: NUGMeetingFTPUpdateJune2002.ppt | ppt | 62 KB Introducing Juan Meza - the new head of NERSC HPC Research Dept June 3, 2002 | Author(s): Juan Meza | Download File: NUG.060302.ppt | ppt | 471 KB Visualization Update (1 of 2) June 3, 2002 | Author(s): Ken Schwartz | Download File: NUG060302-ks.ppt | ppt | 3.4 MB (See Visualization update (2 of 2) for movies by Ken Schwartz) Visualization Update (2 of 2) June

  5. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Report on the ACTS Toolkit June 4, 2002 | Author(s): O. Marques | Download File: NUG.1.ppt | ppt | 956 KB The ACTS (Advanced Computational Testing and Simulation) Toolkit is a set of computational tools developed primarily at DOE laboratories and is aimed at simplifying the solution of common and important computational problems on parallel machines. The tools fall into four broad categories: numerical, and support for code development, execution and library development. In the talk we will

  6. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IBM Compiler Optimization Options June 4, 2002 | Author(s): M. Stewart | Download File: optarg.ppt | ppt | 53 KB All of the IBM supplied compilers produce unoptimized code by default. Specific optimization command line options must be supplied to the compilers in order for them to produce optimized code. In this talk, several of the more useful optimization options for the IBM Fortran, C, and C++ compilers are described and recommendations will be given on which of them are most useful.

  7. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Performance Evaluation Activites at NERSC May 29, 2003 | Author(s): Adrian Wong | Download File: WongNERSCPerfEvalActivities.ppt | ppt | 195 KB Seaborg Code Scalability Project May 29, 2003 | Author(s): Richard Gerber | Download File: Gerberusgscalingnew.ppt | ppt | 186 KB Green's function Monte Carlo Calculations of Light Nuclei May 29, 2003 | Author(s): Steven Pieper | Download File: Piepertalk.pdf | pdf | 148 KB Lattice QCD in Extreme Environments May 29, 2003 | Author(s): Don Sinclair |

  8. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Compiler-based Optimization June 24, 2004 | Author(s): Mike Stewart | URL: http://ipvideo.lbl.gov:8080/ramgen/Stewart.rm Download File: optarg.final.ppt | ppt | 185 KB Libraries and Their Effects on Performance June 24, 2004 | Author(s): Tom DeBoni | URL: http://ipvideo.lbl.gov:8080/ramgen/Deboni.rm Download File: JuneLibrarySlides.ppt | ppt | 2 MB ACTS Components (such as such as ScaLAPACK, TAU, SuperLU, and PETSc) and Case Studies of Their Use June 24, 2004 | Author(s): Osni Marques | URL:

  9. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Driven Computing: NERSC's Five-Year Plan for 2005 - 2010 October 4, 2005 | Author(s): Horst Simon and Bill Kramer | Download File: NUGStrategyOverview.ppt | ppt | 4.8 MB NERSC/LBNL Data Analytics Project October 4, 2005 | Author(s): Wes Bethel | Download File: NERSC-analytics-04Oct2005.pdf | pdf | 440 KB Progress in Supercomputing: The Top Three Breakthroughs of the Last 20 Years and the Top Three Challenges for the Next 20 Years October 4, 2005 | Author(s): Horst Simon | Download File:

  10. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Compiling: Pathscale Fortran, C, C++; mpif90, mpicc, mpicxx, recommended compiler options, useful compiler options, libraries, porting from Seaborg, porting from other Linux clusters October 3, 2005 | Author(s): Michael Stewart | Download File: Compiling.mstewart.ppt | ppt | 1.2 MB High Speed Interconnect and MVAPICH: InfiniBand characteristics (latency, bandwidth), network topology, differences from Seaborg, MVAPICH overview October 3, 2005 | Author(s): Bill Saphir | Download File:

  11. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bassi Overview and Status: a high-level description of the system, its configuration, processors, interconnect, file systems, and software June 13, 2006 | Author(s): Richard A. Gerber | Download File: BassiintroNUG06.ppt | ppt | 14 MB Benchmark Performance on Bassi: performance is compared to Seaborg, Jacquard, and a variety of other HPC platforms. June 13, 2006 | Author(s): Jonathan Carter | Download File: NUGJune2006Bench.ppt | ppt | 1.8 MB Benchmarking and System Architecture Updates

  12. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC Updates Status; current activities and projects Roadmap, future projects, and impact of potential continuing resolution September 17, 2007 | Author(s): Bill Kramer | Download File: Kramer-NERSCIntro-v2.ppt | ppt | 23 MB Download File: Kramer-NERSCIntro-v2.pdf | pdf | 13 MB HPSS Update September 17, 2007 | Author(s): Jason Hick | Download File: Hick-NUGHPSSUpdate.ppt | ppt | 1.2 MB DOE's Operational Review of ORNL, NERSC and PNNL September 17, 2007 | Author(s): Stephane Ethier | Download

  13. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced code optimization cache blocking, prefetching, and OpenMP September 20, 2007 | Author(s): John Levesque | Download File: Levesque-cacheblockingandprefetch.ppt | ppt | 115 KB PGI compiler - How to use the compiler; flags for porting, debugging and optimization September 18, 2007 | Author(s): John Levesque | Download File: Levesque-Compiler.ppt | ppt | 256 KB XT4 socket optimization, with examples September 18, 2007 | Author(s): John Levesque | Download File:

  14. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A New Debugger for NERSC: DDT September 17, 2007 | Author(s): Katie Antypas | Download File: Antypas-NUG2007DDToverview.ppt | ppt | 960 KB ACTS Collection September 18, 2007 | Author(s): Osni Marques | Download File: Marques-ACTS.ppt | ppt | 14 MB Adaptive Mesh Simulations of Pellet Injection into Tokamaks September 17, 2007 | Author(s): Ravi Samtaney | Download File: Samtaney-NERSC.pdf | pdf | 4.7 MB Advanced code optimization cache blocking, prefetching, and OpenMP September 20, 2007 |

  15. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2007/2008 User Survey Result October 2, 2008 | Author(s): Francesca Verdier | Download File: NUG2008-UserSurvey.pdf | pdf | 175 KB Accelerating X Windows with NX* October 2, 2008 | Author(s): Janet Jacbsen | Download File: NXDemo.pdf | pdf | 52 KB Debugging with DDT October 2, 2008 | Author(s): David Lecomber | Source: Allinea Software | Download File: DDT-lecomber.pdf | pdf | 1.1 MB Defining Best Practices for Network Tuning October 2, 2008 | Author(s): Brent Draney | Download File:

  16. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Analysis Using the R Project for Statistical Computing October 7, 2009 | Author(s): Daniela Ushizima | Download File: UshizimaD.pdf | pdf | 7.8 MB NERSC Accomplishments and Plans October 7, 2009 | Author(s): Kathy Yelick | Download File: YelickK.pdf | pdf | 34 MB Hopper, the new NERSC-6 System October 7, 2009 | Author(s): Jonathan Carter | Download File: CarterJ.pdf | pdf | 2.5 MB 2009 User Survey Results October 7, 2009 | Author(s): Francesca Verdier | Download File: VerdierF.pdf | pdf |

  17. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Survey Results October 7, 2009 | Author(s): Francesca Verdier | Download File: VerdierF.pdf | pdf | 2.9 MB 2010 Allocations October 7, 2009 | Author(s): Francesca Verdier |...

  18. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    20th Century Reanalysis September 11, 2012 | Author(s): Gil Compo | Download File: Compo.pdf | pdf | 2.4 MB BERNERSC Requirements Gathering Workshop September 11, 2012 |...

  19. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    18, 2007 | Author(s): Matt Andrews | Download File: AndrewsNGF.ppt | ppt | 469 KB Benchmarking and System Architecture Updates September 18, 2007 | Author(s): John Shalf |...

  20. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Michael Stewart | Download File: optarg.bassi.final.ppt | ppt | 271 KB Experiences benchmarking GTC on High Performance Computers June 13, 2006 | Author(s): Stephane Ethier |...