National Library of Energy BETA

Sample records for attached waiver petition

  1. Petition for Identified Waiver of Patent Rights | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested PartiesBuilding energy codes havePUBLICofPatriciaOrderDepartmentPeterPetition

  2. No-migration variance petition. Volume 3, Revision 1: Appendix B, Attachments A through D

    SciTech Connect (OSTI)

    Not Available

    1990-03-01

    Volume III contains the following attachments: TRUPACT-II content codes (TRUCON); TRUPACT-II chemical list; chemical compatibility analysis for Rocky Flats Plant waste forms (Appendix 2.10.12 of TRUPACT-II safety analysis report); and chemical compatibility analyses for waste forms across all sites.

  3. No-migration variance petition. Appendix B, Attachments E--Q: Volume 4, Revision 1

    SciTech Connect (OSTI)

    Not Available

    1990-03-01

    Volume IV contains the following attachments: TRU mixed waste characterization database; hazardous constituents of Rocky flats transuranic waste; summary of waste components in TRU waste sampling program at INEL; total volatile organic compounds (VOC) analyses at Rocky Flats Plant; total metals analyses from Rocky Flats Plant; results of toxicity characteristic leaching procedure (TCLP) analyses; results of extraction procedure (EP) toxicity data analyses; summary of headspace gas analysis in Rocky Flats Plant (RFP) -- sampling program FY 1988; waste drum gas generation--sampling program at Rocky Flats Plant during FY 1988; TRU waste sampling program -- volume one; TRU waste sampling program -- volume two; and summary of headspace gas analyses in TRU waste sampling program; summary of volatile organic compounds (V0C) -- analyses in TRU waste sampling program.

  4. SECONDARY FIELD PETITION FORM Department of Psychology

    E-Print Network [OSTI]

    SECONDARY FIELD PETITION FORM Department of Psychology This form is to be used for any course substantial overlap with the material covered in Psychology 1900 or Stat 100/101/102/104. Attach a statement and a syllabus. Courses taken elsewhere (transfer students only): Petitions for psychology courses taken

  5. Conference Waiver

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p aDepartment ofCommercialEnergyDepartment ofHeating andkey|Waiver

  6. Personal Services Agreements Waivers

    E-Print Network [OSTI]

    Personal Services Agreements Waivers: Appendix B Responsible Administrative Units: Human Resources and materials to the Human Resources Office for review and approval. Please note, this waiver is valid only in the Director's Rule 10-4(E)(4). All commitment vouchers issued under this waiver must comply with State Fiscal

  7. Patent Waivers Overview | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Waivers Overview A patent waiver refers to the government's waiver of rights in an invention arising from DOE-funded research so that private entities may expedite...

  8. H: Graduation Petition Form.doc Rev: 8/2012 CIVIL & ENVIRONMENTAL ENGINEERING

    E-Print Network [OSTI]

    H: Graduation Petition Form.doc Rev: 8/2012 CIVIL & ENVIRONMENTAL ENGINEERING GRADUATION PETITION departmental graduation degree requirements. Return this form along with any supporting documents to the Civil & Environmental Engineering Department in More Hall 201, Box 352700. You may also submit this form and attachments

  9. FY 2013 Conference Waiver - Emergency Management Issues Special...

    Office of Environmental Management (EM)

    3 Conference Waiver - Emergency Management Issues Special Interest Group FY 2013 Conference Waiver - Emergency Management Issues Special Interest Group FY 2013 Conference Waiver -...

  10. Petition for Advance Waiver of Patent Rights | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested PartiesBuilding energy codes havePUBLICofPatriciaOrderDepartmentPeter

  11. Memorandum of Decision: Withdrawal of Waiver for Fluorescent...

    Energy Savers [EERE]

    & Publications Nationwide Categorical Waiver Memorandum of Decision: Withdrawal of LED Lighting Waiver ISSUANCE 2014-12-29: Energy Conservation Program: Clarification for...

  12. (Expired) Nationwide Limited Public Interest Waiver for LED Lighting...

    Energy Savers [EERE]

    (Expired) Nationwide Limited Public Interest Waiver for LED Lighting and HVAC Units: February 11, 2010 (Expired) Nationwide Limited Public Interest Waiver for LED Lighting and HVAC...

  13. Class Patent Waiver W(C)2011-009

    Broader source: Energy.gov [DOE]

    This is a request by WFO Class Waiver for a DOE waiver of domestic and foreign patent rights under agreement N/A.

  14. Class Patent Waiver W(C)2011-013

    Broader source: Energy.gov [DOE]

    This is a request by AGREEMENT FOR COMMERCIALIZING TECHNOLOGY (ACT) CLASS WAIVER for a DOE waiver of domestic and foreign patent rights under agreement N/A.

  15. ATTACHMENT G

    Office of Environmental Management (EM)

    Grid Locations G.7-2 Technical Area 54, Area G, Pad 3 Outdoor Container Storage Unit Drainage Sampling Locations v Attachment G.7--TA-54 Area G Pad 3 Outdoor Closure Plan Los...

  16. STATEMENT OF CONSIDERATIONS CLASS WAIVER OF THE GOVERNMENT'S

    Broader source: Energy.gov (indexed) [DOE]

    AT DESIGNATED NON-PROPRIETARY USER FACILITIES: DOE WAIVER NO. W(C)-2008-003. This Class Waiver is intended to provide for the disposition of intellectual property rights and...

  17. Health Insurance Waiver Application Sign onto my.Boisestate

    E-Print Network [OSTI]

    Barrash, Warren

    Health Insurance Waiver Application Sign onto my.Boisestate Click on Student Center Select Health: Not Submitted #12;Read the SHIP Waiver Application #12;Click on the Student Health Insurance Waiver Application button This will redirect you to the Student Health Insurance Company website: . Fill in the Health

  18. Class Patent Waiver W(C)2011-004 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    such a waiver best serves the interests of the United States and the general public. Class Patent Waiver W(C)2011-004 More Documents & Publications ClassWaiver-PUA.pdf Class...

  19. WC_2002_003__CLASS_WAIVER_OF_THE_GOVERNMENTS_US_AND_FOREIGN_...

    Broader source: Energy.gov (indexed) [DOE]

    3CLASSWAIVEROFTHEGOVERNMENTSUSANDFOREIGN.pdf More Documents & Publications ClassWaiverWC-2002-003.pdf Class Patent Waiver W(C)2008-006 Class Patent Waiver W(C)2011-001...

  20. WAIVER FORM ACADEMIC YEAR 2014/15

    E-Print Network [OSTI]

    Neri, Peter

    .abdn.ac.uk/mycurriculum) provides details of the pre-requisites (eg. the lower level courses that must be passed or other Number (eg 51312345) Programme of Study (eg MA Economics) Course(s) for which Waiver Sought (eg. BI2017 Genes & Evolution) Pre-Requisite(s) Missing (eg BI1007 Organismal Biology) Please give the reasons why

  1. HEALTH WAIVER FORM 2015 1. PERSONAL INFORMATION

    E-Print Network [OSTI]

    Snider, Barry B.

    HEALTH WAIVER FORM 2015 1. PERSONAL INFORMATION Last Name First Name Date of Hire You are completing this form because you are eligible for benefits and declined to enroll in health As a Benefit eligible employee you may participate in the University's sponsored health and/or dental insurance

  2. Advance Patent Waiver W(A)2007-020

    Broader source: Energy.gov [DOE]

    This is a request by GENERAL ELECTRIC for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-06NT42950

  3. Advance Patent Waiver W(A)2005-054

    Broader source: Energy.gov [DOE]

    This is a request by SIEMEN for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT42444.

  4. Identified Patent Waiver W(I)2011-003

    Broader source: Energy.gov [DOE]

    This is a request by RESONANT CAVITY APPARATUS for a DOE waiver of domestic and foreign patent rights under agreement DE-AC04-94AL85000.

  5. Advance Patent Waiver W(A)2012-033

    Broader source: Energy.gov [DOE]

    This is a request by GE-GLOBAL RESEARCH for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-OE000593.

  6. Advance Patent Waiver W(A)2013-003

    Broader source: Energy.gov [DOE]

    This is a request by UNITED TECHNOLOGIES CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0006108.

  7. Advance Patent Waiver W(A)2013-015

    Broader source: Energy.gov [DOE]

    This is a request by Caterpillar Inc for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005980.

  8. Advance Patent Waiver W(A)2012-034

    Broader source: Energy.gov [DOE]

    This is a request by CORNING INCORPORATED for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-EE0005757.

  9. Advance Patent Waiver W(A)2012-020

    Broader source: Energy.gov [DOE]

    This is a request by CLIPPER WINDPOWER LLC for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-EE0005141.

  10. Advance Patent Waiver W(A)2012-027

    Broader source: Energy.gov [DOE]

    This is a request by DAIMIER TRUCKS NORTH AMERICA for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-EE0003348.

  11. Advance Patent Waiver W(A)2013-016

    Broader source: Energy.gov [DOE]

    This is a request by GENERAL MOTORS LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005753.

  12. Advance Patent Waiver W(A)2013-019

    Broader source: Energy.gov [DOE]

    This is a request by CREE, INC. for a DOE waiver of domestic and foreign patent rights under agreement NGB-3-23028-01.

  13. Advance Patent Waiver W(A)2012-029

    Broader source: Energy.gov [DOE]

    This is a request by ALCOA COMMERICAL WINDOWS, LLC for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-EE0004012.

  14. Advance Patent Waiver W(A)2013-007

    Broader source: Energy.gov [DOE]

    This is a request by CA TCHLIGHT ENERGY, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005974.

  15. Advance Patent Waiver W(A)2012-031

    Broader source: Energy.gov [DOE]

    This is a request by SRI INTERNATIONAL for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-NT0005578.

  16. Advance Patent Waiver W(A)2013-013

    Broader source: Energy.gov [DOE]

    This is a request by BABCOCK & WILCOX mPOWER for a DOE waiver of domestic and foreign patent rights under agreement DE-NE0000583.

  17. Advance Patent Waiver W(A)2012-024

    Broader source: Energy.gov [DOE]

    This is a request by SIEMENS ENERGY, INC. for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-EE0005493.

  18. Advance Patent Waiver W(A)2013-008

    Broader source: Energy.gov [DOE]

    This is a request by GENERAL MOTORS LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005969.

  19. Advance Patent Waiver W(A)2008-022

    Broader source: Energy.gov [DOE]

    This is a request by ABENGOA BIOENERGY BIOMASS OF KANSAS, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-FC3607017028

  20. Advance Patent Waiver W(A)2011-039

    Broader source: Energy.gov [DOE]

    This is a request by 3M COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-08GO18134.

  1. Advance Patent Waiver W(A)2005-016

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a request by BAKER HUGHES INTERNATIONAL for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT15488.

  2. Advance Patent Waiver W(A)2011-027

    Broader source: Energy.gov [DOE]

    This is a request by VARIAN ASSOCIATES, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0004737.

  3. Advance Patent Waiver W(A)2012-030

    Broader source: Energy.gov [DOE]

    This is a request by SRI INTERNATIONAL for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-FE0000896.

  4. Identified Patent Waiver W(I)2008-011

    Broader source: Energy.gov [DOE]

    This is a request by ELTRON RESEARCH, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT42469

  5. Advance Patent Waiver W(A)2010-024

    Broader source: Energy.gov [DOE]

    This is a request by EASTMAN CHEMICAL COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT42469

  6. Advance Patent Waiver W(A)2010-054

    Broader source: Energy.gov [DOE]

    This is a request by UNITED TECHNOLOGIE for a DOE waiver of domestic and foreign patent rights under agreement DE-NT003894

  7. Identified Patent Waiver W(I)2011-010

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a request by THERMALLY CONDUCTIVE for a DOE waiver of domestic and foreign patent rights under agreement DE-AC05-OO0R22725.

  8. Identified Patent Waiver W(I)2011-009

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a request by SINTERED POLYCRYSTALLINE for a DOE waiver of domestic and foreign patent rights under agreement DE-AC05-00OR22725.

  9. Advance Patent Waiver W(A)2011-033

    Broader source: Energy.gov [DOE]

    This is a request by ABB INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-OE0000547.

  10. Advance Patent Waiver W(A)2011-046

    Broader source: Energy.gov [DOE]

    This is a request by ALSTOM GRID INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-OE0000551.

  11. Advance Patent Waiver W(A)2011-007

    Broader source: Energy.gov [DOE]

    This is a request by BAYER MATERIALSCIENCE LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0004571.

  12. Advance Patent Waiver W(A)2012-028

    Broader source: Energy.gov [DOE]

    This is a request by SIEMENS ENERGY, INC. for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-FE0005666.

  13. Class Patent Waiver W(C)2012-006

    Broader source: Energy.gov [DOE]

    This is a request by LBNL DESIGN FORWARD PROJECT for a DOE Class patent waiver of domestic and foreign patent rights under agreement N/A.

  14. Class Patent Waiver W(C)2011-012

    Broader source: Energy.gov [DOE]

    This is a request by SOLID STATE LIGHTING PRODUCT DEVELOPMENT ROUND 8 for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-0000563.

  15. Class Patent Waiver W(C)2008-008

    Broader source: Energy.gov [DOE]

    This is a request by University of Chicago for a DOE waiver of domestic and foreign patent rights under agreement DE-AC02-06CH11357

  16. Class Patent Waiver W(C)2010-002

    Broader source: Energy.gov [DOE]

    This is a request by VEHICLE TECHNOLOGIES BROAD AGENCY for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-0000239

  17. Advance Patent Waiver W(A)2005-049

    Broader source: Energy.gov [DOE]

    This is a request by AMERICAN AIR LIQUIDE for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-02NT41586.

  18. Advance Patent Waiver W(A)2012-013

    Broader source: Energy.gov [DOE]

    This is a request by BAKER HUGHES OILFIELD OPERATIONS, INC. for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-EE0005505.

  19. Advance Patent Waiver W(A)2007-021

    Broader source: Energy.gov [DOE]

    This is a request by SUN POWER CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-PS36-06GO96034

  20. Advance Patent Waiver W(A)2012-016

    Broader source: Energy.gov [DOE]

    This is a request by LINDE, INC. for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-FE0007453.

  1. Advance Patent Waiver W(A)2013-031

    Broader source: Energy.gov [DOE]

    This is a request by WESTINGHOUSE ELECTRIC COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-NE0000566.

  2. Advance Patent Waiver W(A)2013-027

    Broader source: Energy.gov [DOE]

    This is a request by ELECTRICORE INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005968

  3. Advance Patent Waiver W(A)2013-018

    Broader source: Energy.gov [DOE]

    This is a request by General Motors, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0006082.

  4. Advance Patent Waiver W(A)2013-014

    Broader source: Energy.gov [DOE]

    This is a request by W.R GRACE AND CO for a DOE waiver of domestic and foreign patent rights under agreement DE- EE0005991.

  5. Advance Patent Waiver W(A)2013-022

    Broader source: Energy.gov [DOE]

    This is a request by 3M COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005795.

  6. Advance Patent Waiver W(A)2009-001

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a request by GE GLOBAL RESEARCHH CENTER for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-GO18085

  7. Identified Patent Waiver W(I)2012-016

    Broader source: Energy.gov [DOE]

    This is a request by CERAMATEC, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0000408.

  8. Advance Patent Waiver W(A)2011-001

    Broader source: Energy.gov [DOE]

    This is a request by PRAXAIR, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0004908.

  9. Identified Patent Waiver W(I)2011-006

    Broader source: Energy.gov [DOE]

    This is a request by SANDIA NATIONAL LABORATORY for a DOE waiver of domestic and foreign patent rights under agreement DE-AC04-95AL85000.

  10. Class Patent Waiver W(C)2011-001

    Broader source: Energy.gov [DOE]

    This is a request by JEFFERSON SCIENCE ASSOCIATE, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-AC0506OR23177.

  11. Identified Patent Waiver W(I)2009-001

    Broader source: Energy.gov [DOE]

    This is a request by DUSAN RADOSAVLJEVIC for a DOE waiver of domestic and foreign patent rights under agreement DE-AC07-05ID14516

  12. Identified Patent Waiver W(I)2010-007

    Broader source: Energy.gov [DOE]

    This is a request by HONEYWELL INTERNATIONAL, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-AC04-94AL85000

  13. Identified Patent Waiver W(I)2011-005

    Broader source: Energy.gov [DOE]

    This is a request by MICHAEL BROCKWELL for a DOE waiver of domestic and foreign patent rights under agreement DE-AC52-06NA25396.

  14. Identified Patent Waiver W(I)2008-008

    Broader source: Energy.gov [DOE]

    This is a request by SANDIA CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-AC04-94AL85000

  15. Advance Patent Waiver W(A)2011-036

    Broader source: Energy.gov [DOE]

    This is a request by HONEYWELL LABORATORIES for a DOE waiver of domestic and foreign patent rights under agreement DE-OE0000544.

  16. Class Patent Waiver W(C)2009-001

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a request by ENERGY INTENSIVE PROCESSES for a DOE waiver of domestic and foreign patent rights under agreement DE-PS36-08GO98014

  17. Advance Patent Waiver W(A)2004-084

    Broader source: Energy.gov [DOE]

    This is a request by MILLENNIUM INORGANIC CHEMICAL for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-04GO14153.

  18. Advance Patent Waiver W(A)2011-050

    Broader source: Energy.gov [DOE]

    This is a request by EMERSON ELECTRIC for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0004000.

  19. Identified Patent Waiver W(I)2010-003

    Broader source: Energy.gov [DOE]

    This is a request by UOP, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FG26-04NT42121

  20. Advance Patent Waiver W(A)2013-005

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a request by STATOIL WIND US LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005988.

  1. Advance Patent Waiver W(A)2011-002

    Broader source: Energy.gov [DOE]

    This is a request by APPLIED MATERIALS, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003838.

  2. Advance Patent Waiver W(A)2010-047

    Broader source: Energy.gov [DOE]

    This is a request by APPLIED MATERIALS, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003331

  3. Advance Patent Waiver W(A)2011-058

    Broader source: Energy.gov [DOE]

    This is a request by GENERAL ELECTRIC CO. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005143.

  4. Identified Patent Waiver W(I)2012-014

    Broader source: Energy.gov [DOE]

    This is a request by CERAMATEC, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0000408.

  5. Identified Patent Waiver W(I)2012-015

    Broader source: Energy.gov [DOE]

    This is a request by CERAMATEC, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0000408.

  6. MemoAdvisoryAssistanceContractWaiver.pdf | Department of Energy

    Office of Environmental Management (EM)

    ecMemoProjectManagementExpectationsFinancialAssistance23June06.pdf ClosingLanguagePatentWaiverGrantCases.pdf Project Management Expectations for Financial Assistance...

  7. Advance Patent Waiver W(A)2008-013

    Broader source: Energy.gov [DOE]

    This is a request by SANYO ELECTRIC COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-07GO17050

  8. FY 2013 Conference Waiver - Emergency Management Issues Special...

    Broader source: Energy.gov (indexed) [DOE]

    FY 2013 Conference Waiver - Emergency Management Issues Special Interest Group.pdf More Documents & Publications Application to Export Electric Energy OE Docket No. EA-383 Pilot...

  9. Advance Patent Waiver W(A)2007-005

    Broader source: Energy.gov [DOE]

    This is a request by EATON CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-06GO16054

  10. Advance Patent Waiver W(A)2006-019

    Broader source: Energy.gov [DOE]

    This is a request by NALCO CHEMICAL CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-06FT42721

  11. Advance Patent Waiver W(A)2012-003

    Broader source: Energy.gov [DOE]

    This is a request by CREE for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-FOA-0000439.

  12. Advance Patent Waiver W(A)2011-061

    Broader source: Energy.gov [DOE]

    This is a request by ABENGOA SOLAR INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-08GO18037.

  13. Advance Patent Waiver W(A)2012-004

    Broader source: Energy.gov [DOE]

    This is a request by GENERAL ELECTRIC GLOBAL REARCH for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-FO0007514.

  14. Identified Patent Waiver W(I)2008-009

    Broader source: Energy.gov [DOE]

    This is a request by SABIC INNOVATIVE PLASTICS for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-03GO13000

  15. Advance Patent Waiver W(A)2005-021

    Broader source: Energy.gov [DOE]

    This is a request by UNITED TECHNOLOGIES CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-05GO15151.

  16. Advance Patent Waiver W(A)2006-034

    Broader source: Energy.gov [DOE]

    This is a request by ENERGY CONVERSION DEVICES, INC. for a DOE waiver of domestic and foreign patent rights under agreement UNKNOWN

  17. Advance Patent Waiver W(A)2010-045

    Broader source: Energy.gov [DOE]

    This is a request by LUMMUS COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003457

  18. Advance Patent Waiver W(A)2013-006

    Broader source: Energy.gov [DOE]

    This is a request by PRINCIPLE POWER, INC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005987.

  19. Advance Patent Waiver W(A)2005-033

    Broader source: Energy.gov [DOE]

    This is a request by EASTMAN CHEMICAL COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-AC26-99NT40675.

  20. Advance Patent Waiver W(A)2008-025

    Broader source: Energy.gov [DOE]

    This is a request by Grace Davison Company for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-05GO085006

  1. Advance Patent Waiver W(A)2008-044

    Broader source: Energy.gov [DOE]

    This is a request by ALSTOM POWER, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-07NT43095

  2. Advance Patent Waiver W(A)2010-018

    Broader source: Energy.gov [DOE]

    This is a request by BOEING COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-08GO18055

  3. Identified Patent Waiver W(I)2008-001

    Broader source: Energy.gov [DOE]

    This is a request by IMAGINEERING TECHNOLOGIES INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-AC07-94ID13223

  4. Identified Patent Waiver W(I)2011-012

    Broader source: Energy.gov [DOE]

    This is a request by ALSTOM POWER, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-01NT41223.

  5. Patent Waiver W(I)2011-013

    Broader source: Energy.gov [DOE]

    This is a request by ALSTOM POWER, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-01NT41223.

  6. Identified Patent Waiver W(I)2011-011

    Broader source: Energy.gov [DOE]

    This is a request by ALSTOM POWER, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-01NT41223.

  7. Advance Patent Waiver W(A)2010-017

    Broader source: Energy.gov [DOE]

    This is a request by FORD MOTOR COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-08GO18128

  8. Advance Patent Waiver W(A)2007-014

    Broader source: Energy.gov [DOE]

    This is a request by DONALDSON COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-06NT42861

  9. Advance Patent Waiver W(A)2011-008

    Broader source: Energy.gov [DOE]

    This is a request by CERAMATEC, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0000395.

  10. Advance Patent Waiver W(A)2009-005

    Broader source: Energy.gov [DOE]

    This is a request by CONOCO PHILIPS for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-08NT0006553

  11. Advance Patent Waiver W(A)2010-003

    Broader source: Energy.gov [DOE]

    This is a request by GENERAL ELECTRICC GLOBAL RESEARCH for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0000784

  12. Advance Patent Waiver W(A)2005-023

    Broader source: Energy.gov [DOE]

    This is a request by HEADWATER for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-04NT42448.

  13. Advance Patent Waiver W(A)2011-048

    Broader source: Energy.gov [DOE]

    This is a request by ADA-ES for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0004343.

  14. Advance Patent Waiver W(A)2009-045

    Broader source: Energy.gov [DOE]

    This is a request by BABCOCK & WILCO for a DOE waiver of domestic and foreign patent rights under agreement DE-AC52-09NA29596

  15. Advance Patent Waiver W(A)2011-049

    Broader source: Energy.gov [DOE]

    This is a request by DOW CHEMICAL COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003916.

  16. Advance Patent Waiver W(A)2010-030

    Broader source: Energy.gov [DOE]

    This is a request by RED ACQUISITION, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003364

  17. Advance Patent Waiver W(A)2009-030

    Broader source: Energy.gov [DOE]

    This is a request by BALDOR ELECTRIC COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-08GO18132

  18. Advance Patent Waiver W(A)2011-018

    Broader source: Energy.gov [DOE]

    This is a request by ESOLAR for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003595.

  19. Identified Patent Waiver W(I)2008-002

    Broader source: Energy.gov [DOE]

    This is a request by NORMANN, RANDY A. for a DOE waiver of domestic and foreign patent rights under agreement DE-AC04-94AL85000

  20. Identified Patent Waiver W(I)2008-004

    Broader source: Energy.gov [DOE]

    This is a request by RUSSO, A. J. for a DOE waiver of domestic and foreign patent rights under agreement AT(29-1)-789

  1. Identified Patent Waiver W(I)2011-001

    Broader source: Energy.gov [DOE]

    This is a request by UCHICAGO ARGONNE, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-AC02-06CH11357.

  2. IIdentified Patent Waiver W(I)2008-003

    Broader source: Energy.gov [DOE]

    This is a request by NORMANN, RANDY A. for a DOE waiver of domestic and foreign patent rights under agreement DE-AC04-94AL85000

  3. Advance Patent Waiver W(A)2005-005

    Broader source: Energy.gov [DOE]

    This is a request by HONEYWELL, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-00OR22809.

  4. Advance Patent Waiver W(A)2006-032

    Broader source: Energy.gov [DOE]

    This is a request by HONEYWELL INTERNATIONAL, INC. for a DOE waiver of domestic and foreign patent rights under agreement UNKNOWN

  5. Class Patent Waiver W(C)2012-005

    Broader source: Energy.gov [DOE]

    This is a request by US INDIA JOINT CLEAN ENERGY for a DOE Class patent waiver of domestic and foreign patent rights under agreement DE-FOA-0000506.

  6. Advance Patent Waiver W(A)2011-065

    Broader source: Energy.gov [DOE]

    This is a request by OWENS CORNING for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005338.

  7. Advance Patent Waiver W(A)2011-071

    Broader source: Energy.gov [DOE]

    This is a request by THE DOW CHEMICAL COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005434.

  8. Advance Patent Waiver W(A)2009-021

    Broader source: Energy.gov [DOE]

    This is a request by PHILIPS LUMILEDS for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-08NT01583

  9. Advance Patent Waiver W(A)2005-038

    Broader source: Energy.gov [DOE]

    This is a request by PHILLIPS ELECTRONIC for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT42342.

  10. Advance Patent Waiver W(A)2010-056

    Broader source: Energy.gov [DOE]

    This is a request by PHILIPS RESEARCH LABORATORY for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003978

  11. Advance Patent Waiver W(A)2010-022

    Broader source: Energy.gov [DOE]

    This is a request by PHILIPS LUMILEDS for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003210

  12. Advance Patent Waiver W(A)2010-021

    Broader source: Energy.gov [DOE]

    This is a request by PHILIPS LUMILEDS for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003249

  13. Class Patent Waiver W(C)2009-008

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a request by ARPA ENERGY for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA0000065

  14. Class Patent Waiver W(C)2009-021

    Broader source: Energy.gov [DOE]

    This is a request by ENERGY INNOVATIONS HUBS FUEL FROM SUNLIGHT for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-0000214

  15. Advance Patent Waiver W(A)2008-035

    Broader source: Energy.gov [DOE]

    This is a request by POET RESEARCH, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-08GO88033

  16. Advance Patent Waiver W(A)2007-022

    Broader source: Energy.gov [DOE]

    This is a request by SIEMENS for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-02NT41247

  17. Advance Patent Waiver W(A)2005-062

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a request by UNITED TECHNOLOGIES CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT42626.

  18. Advance Patent Waiver W(A)2011-037

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a request by DELPHI AUTOMOTIVE SYSTEMS, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0000478.

  19. Advance Patent Waiver W(A)2009-064

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a request by ROLLS ROYCE FUEL SYSTEMS for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0000303

  20. Class Patent Waiver W(C)2008-004

    Broader source: Energy.gov [DOE]

    This is a request by BATTELLE for a DOE waiver of domestic and foreign patent rights under agreement DE-AC07-05ID14517

  1. Advance Patent Waiver W(A)2005-058

    Broader source: Energy.gov [DOE]

    This is a request by ASTRONAUTICS CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-03NT1948.

  2. Advance Patent Waiver W(A)2007-015

    Broader source: Energy.gov [DOE]

    This is a request by UNITED TECHNOLOGIES CORP for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-07NT43055

  3. Advance Patent Waiver W(A)2010-062

    Broader source: Energy.gov [DOE]

    This is a request by PARKER HANNIFIN CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0000296

  4. Advance Patent Waiver W(A)2010-036

    Broader source: Energy.gov [DOE]

    This is a request by GE GLOBAL RESEARCH for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003251

  5. Advance Patent Waiver W(A)2009-055

    Broader source: Energy.gov [DOE]

    This is a request by DUPONT COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0002593

  6. Advance Patent Waiver W(A)2011-012

    Broader source: Energy.gov [DOE]

    This is a request by CAMBRIOS TECHNOLOGIES CORP. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003254.

  7. Class Patent Waiver W(C)2009-017

    Broader source: Energy.gov [DOE]

    This is a request by GEOTHERMAL TECHNOLOGIES PROGRAM for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-0000116

  8. Advance Patent Waiver W(A)2008-028

    Broader source: Energy.gov [DOE]

    This is a request by INEOS USA LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-04GO14315

  9. Active Duty Military Tuition Waiver UNIVERSITY OF NEW MEXICO

    E-Print Network [OSTI]

    New Mexico, University of

    Active Duty Military Tuition Waiver UNIVERSITY OF NEW MEXICO SEMESTER: __________ YEAR of the (DUTY STATION) State of New Mexico. This active duty assignment is for the period from _______________________________________________________ ORGANIZATION Return waiver to: The University of New Mexico Division of Enrollment Management Office

  10. DUAL CAREER FAMILY PETITION Harvard Medical School

    E-Print Network [OSTI]

    Mootha, Vamsi K.

    DUAL CAREER FAMILY PETITION Harvard Medical School Name: Harvard Title: Title of Proposal: Sponsor employee of the company, title/position, department or group, and job responsibilities: If employee, please

  11. WC_1995_010__PETITION_FOR_CLASS_WAIVER_for_KAISER_HILL_CO_In.pdf |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematics And Statistics » USAJobs Search USAJobsAdvancedVeteranDepartmentDepartment of1- In the1Department

  12. Persons Who Received the DC PSC's Emergency Petition and Complaint...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Persons Who Received the DC PSC's Emergency Petition and Complaint via E-mail on August 24, 2005 Persons Who Received the DC PSC's Emergency Petition and Complaint via E-mail on...

  13. Attachment H1

    Office of Environmental Management (EM)

    ATTACHMENT H1 Page H1-ii LIST OF FIGURES Figure Title Figure H1-1 Spatial View of WIPP Surface and Underground Facilities Figure H1-2 Standard Waste Box and Seven-Pack...

  14. Advanced Patent Waivers | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p u t y A sCOLONY PROJECTRecord4 Advance Patent Waiver

  15. Advance Patent Waiver W(A)2008-007

    Broader source: Energy.gov [DOE]

    This is a request by SCHOTT NORTH AMERICA, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-07GO17001

  16. Identified Patent Waiver W(I)2012-003

    Broader source: Energy.gov [DOE]

    This is a request by UCHICAGO ARGONNE, LLC for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC02-06CH11357.

  17. Identified Patent Waiver W(I)2012-005

    Broader source: Energy.gov [DOE]

    This is a request by UCHICAGO ARGONNE, LLC for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC02-06CH11357.

  18. Identified Patent Waiver W(I)2012-004

    Broader source: Energy.gov [DOE]

    This is a request by UCHICAGO ARGONNE, LLC for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC02-06CH11357.

  19. Advance Patent Waiver W(A)2010-042

    Broader source: Energy.gov [DOE]

    This is a request by UNIVERSITY OF NORTH DAKOTA for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-08NT43291

  20. Class Patent Waiver W(C)2012-007

    Broader source: Energy.gov [DOE]

    This is a request by SOLID-STATE LIGHTING ROUND 4 for a DOE Class patent waiver of domestic and foreign patent rights under agreement DE-FOA-0000792.

  1. STATEMENT OF CONSIDERATIONS CLASS WAIVER OF THE GOVERNMENT'S...

    Broader source: Energy.gov (indexed) [DOE]

    CONSIDERATIONS CLASS WAIVER OF THE GOVERNMENT'S U.S. AND FOREIGN PATENT RIGHTS IN CERTAIN IDENTIFIED INVENTIONS TO KAISER-HILL ROCKY FLATS MADE IN THE COURSE OF OR UNDER CONTRACT...

  2. Class Patent Waiver W(C)2012-002

    Broader source: Energy.gov [DOE]

    This is a request by DEMONSTRATION FACILITY PROGRAM (MDF) for a DOE Class patent waiver of domestic and foreign patent rights under agreement DE-AC05-OR22725.

  3. Class Patent Waiver W(C)2011-011

    Broader source: Energy.gov [DOE]

    This is a request by SOLID STATE LIGHTING U.S. MANUFACTURING- ROUND 3 for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-0000561.

  4. Class Patent Waiver W(C)2011-010

    Broader source: Energy.gov [DOE]

    This is a request by CONSORTIUM FOR ADVANCED SIMULATION OF LIGHT WATER REACTORS for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-0000170.

  5. Advance Patent Waiver W(A)2010-033

    Broader source: Energy.gov [DOE]

    This is a request by ROLLS ROYCE FUEL SYSTEMS for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-08NT01911

  6. Identified Patent Waiver W(I)2012-012

    Broader source: Energy.gov [DOE]

    This is a request by DR. F. JEFFREY MARTIN for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC52-06NA25396.

  7. Class Patent Waiver W(C)2008-002

    Broader source: Energy.gov [DOE]

    This is a request by NEVADA NUCLEAR SECURITY SITE for a DOE waiver of domestic and foreign patent rights under agreement DE-AC52-06NA25946

  8. Advance Patent Waiver W(A)2006-021

    Broader source: Energy.gov [DOE]

    This is a request by UTC FUEL CELLS, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-06GO86042

  9. Advance Patent Waiver W(A)2005-053

    Broader source: Energy.gov [DOE]

    This is a request by ALLEGHENY TECHNLOGIES WAH CHANG DIVISION for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT42513.

  10. Advance Patent Waiver W(A)2009-002

    Broader source: Energy.gov [DOE]

    This is a request by JOHNSON MATTNEY FUEL CELLS INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-07GO17019

  11. Advance Patent Waiver W(A)2010-046

    Broader source: Energy.gov [DOE]

    This is a request by NUVERA FUEL CELLS, INC for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-07GO17014

  12. Advance Patent Waiver W(A)2008-030

    Broader source: Energy.gov [DOE]

    This is a request by DOW CORNING CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-OBG01B02B

  13. Identified Patent Waiver W(I)2012-002

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a request by BATTELLE MEMORIAL INSTITUTE for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC07-05ID14517.

  14. Advance Patent Waiver W(A)2009-068

    Broader source: Energy.gov [DOE]

    This is a request by United Solar Systems Corp. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-07GO17053

  15. Advance Patent Waiver W(A)2005-031

    Broader source: Energy.gov [DOE]

    This is a request by OSRAM SYLVANIA PRODUCTS, INC for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-05GO85042.

  16. Health Assessment Requirements Candidate Waiver Request Health Assessment Management System

    E-Print Network [OSTI]

    Sin, Peter

    Health Assessment Requirements Candidate Waiver Request Health Assessment Management System Please: To Position #: Position Title: Environmental Health & Safety Use Only Reviewer Name: ___________________ Effective Date: _______________ Comments: Revised: May 14, 2012 #12;Health Assessment Requirements Candidate

  17. Micromechanical die attachment surcharge

    DOE Patents [OSTI]

    Filter, William F. (Albuquerque, NM); Hohimer, John P. (Albuquerque, NM)

    2002-01-01

    An attachment structure is disclosed for attaching a die to a supporting substrate without the use of adhesives or solder. The attachment structure, which can be formed by micromachining, functions purely mechanically in utilizing a plurality of shaped pillars (e.g. round, square or polygonal and solid, hollow or slotted) that are formed on one of the die or supporting substrate and which can be urged into contact with various types of mating structures including other pillars, a deformable layer or a plurality of receptacles that are formed on the other of the die or supporting substrate, thereby forming a friction bond that holds the die to the supporting substrate. The attachment structure can further include an alignment structure for precise positioning of the die and supporting substrate to facilitate mounting the die to the supporting substrate. The attachment structure has applications for mounting semiconductor die containing a microelectromechanical (MEM) device, a microsensor or an integrated circuit (IC), and can be used to form a multichip module. The attachment structure is particularly useful for mounting die containing released MEM devices since these devices are fragile and can otherwise be damaged or degraded by adhesive or solder mounting.

  18. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, Gary L. (Alpine, CA)

    1994-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion.

  19. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, G.L.

    1994-12-13

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion. 3 figures.

  20. Internal pipe attachment mechanism

    DOE Patents [OSTI]

    Bast, R.M.; Chesnut, D.A.; Henning, C.D.; Lennon, J.P.; Pastrnak, J.W.; Smith, J.A.

    1994-12-13

    An attachment mechanism is described for repairing or extending fluid carrying pipes, casings, conduits, etc. utilizing one-way motion of spring tempered fingers to provide a mechanical connection between the attachment mechanism and the pipe. The spring tempered fingers flex to permit insertion into a pipe to a desired insertion depth. The mechanical connection is accomplished by reversing the insertion motion and the mechanical leverage in the fingers forces them outwardly against the inner wall of the pipe. A seal is generated by crushing a sealing assembly by the action of setting the mechanical connection. 6 figures.

  1. Magnetically attached sputter targets

    DOE Patents [OSTI]

    Makowiecki, D.M.; McKernan, M.A.

    1994-02-15

    An improved method and assembly for attaching sputtering targets to cathode assemblies of sputtering systems which includes a magnetically permeable material is described. The magnetically permeable material is imbedded in a target base that is brazed, welded, or soldered to the sputter target, or is mechanically retained in the target material. Target attachment to the cathode is achieved by virtue of the permanent magnets and/or the pole pieces in the cathode assembly that create magnetic flux lines adjacent to the backing plate, which strongly attract the magnetically permeable material in the target assembly. 11 figures.

  2. Turbine nozzle attachment system

    DOE Patents [OSTI]

    Norton, Paul F. (San Diego, CA); Shaffer, James E. (Maitland, FL)

    1995-01-01

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine.

  3. Turbine nozzle attachment system

    DOE Patents [OSTI]

    Norton, P.F.; Shaffer, J.E.

    1995-10-24

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and is attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine. 3 figs.

  4. PETITION FORM ENERGY AND RESOURCES GROUP Submit to: Carina Galicia

    E-Print Network [OSTI]

    Kammen, Daniel M.

    PETITION FORM ENERGY AND RESOURCES GROUP Submit to: Carina Galicia College Advisor 260 Mulford Tel: (510) 642-1750 University of California ­ Berkeley Fax: (510) 642-1085 MINOR IN ENERGY AND RESOURCES PETITION FOR CONFIRMATION Submit this form to the Student Affairs Officer in the Energy and Resources Group

  5. Latest research findings from petite sismique trials

    SciTech Connect (OSTI)

    Belesky, R.M.; Bieniawski, Z.T.; Greenfield, R.J.

    1984-01-01

    Research on a novel in-situ technique known as petite sismique is discussed. This geophysical method is capable of estimating the static deformation modules of a rock mass. The petite-sismique technique utilizes a seismic-refraction survey stressing a correlation between shear-wave frequency and the static deformation modulus. Although the technique was introduced in 1967, petite sismique has not been used extensively due to difficulties in shear-wave generation and detection. Recent developments in geophysical instrumentation provided an opportunity to evaluate better the technique in this study. With the objective of assessing the deformation modulus, field trials were conducted in coal and limestone mines. Despite attempts to develop a reliable shear-wave source, difficulties in frequency determinations persisted due to source characteristics and receiver resonance. A limited number of shear-wave-frequency observations did not confirm the originally documented relationship between shear-wave frequency and the static deformation modulus. The indicated discrepancy is attributed to differences in characteristics of the sources used in the two studies. Arising out of this research are equipment modifications and procedural recommendations which should improve the chances for success in future studies.

  6. University of Oklahoma Norman Campus WAIVER and RELEASE of LIABILITY

    E-Print Network [OSTI]

    Oklahoma, University of

    University of Oklahoma Norman Campus WAIVER and RELEASE of LIABILITY This is a legal and binding. The University of Oklahoma is a state educational institution. References to the University of Oklahoma include: _______________________________________________ _______________________________________________ _______________________________________________ I understand that the University of Oklahoma is not an agent of and has no responsibility for any

  7. Potential Supply Impacts of Removal of 1-Pound RVP Waiver

    E-Print Network [OSTI]

    Patzek, Tadeusz W.

    trends, and current laws and regulations. The EIA's Annual Energy Outlook 2002 (AEO2002) is usedPotential Supply Impacts of Removal of 1-Pound RVP Waiver September 2002 #12;ii Energy Information by the Office of Oil and Gas of the Energy Information Administration. General questions concerning the report

  8. STATEMENT OF CONSIDERATIONS CLASS WAIVER OF U.S. AND FOREIGN...

    Office of Environmental Management (EM)

    subject to this Class Waiver also agree that any products embodying any waived invention or produced through the use of any w aived invention will be manufactured...

  9. Clitic Attachment in Brazilian Portuguese

    E-Print Network [OSTI]

    Simoes, Antonio Roberto Monteiro

    2006-05-01

    Theoretical Linguistics Prepared by Stanley Whitley Clitic Attachment in Brazilian Portuguese Antonio R. M. Simoes University of Kansas Abstract: Teaching and learning the placement of clitics in Brazilian Portuguese is a challenge, especially... style, can be represented phonetically as follows: Simoes, Antonio R. M. "Clitic Attachment in Brazilian Portuguese" Hispania 89.2 (2006): 380-389 Clitic Attachment in Brazilian Port tig a ese 381 TaWe 1 Peninsular Portuguese (port gal] ( VCX ( VC...

  10. Ceramic blade attachment system

    DOE Patents [OSTI]

    Frey, G.A.; Jimenez, O.D.

    1996-12-03

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed between them. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. A pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade. 4 figs.

  11. Ceramic blade attachment system

    DOE Patents [OSTI]

    Frey, deceased, Gary A. (late of Poway, CA); Jimenez, Oscar D. (Escondia, CA)

    1996-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed therebetween. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. And, a pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade.

  12. Attachment 6 - Government Property List

    National Nuclear Security Administration (NNSA)

    2 EQUIPMENT - HANDHELD COMPUTER - WIRELESS WHEEL LOAD SYSTEM 1 EQUIPMENT - HEAT STRESS MONITOR 5 EQUIPMENT - HOIST - PORTABLE 1 November 20, 2013 DE-SOL-0005982 Attachment 6...

  13. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-07-11

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figs.

  14. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

  15. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

  16. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-01-10

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figures.

  17. Doorway mechanism for Dissociative Electron attachment

    E-Print Network [OSTI]

    Simons, Jack

    Doorway mechanism for Dissociative Electron attachment Thomas Sommerfeld Southeastern Louisiana University Hammond, LA Hammond, LA #12;Doorway mechanism for Dissociative Electron attachment Outline Dissociative Electron attachment Doorway mechanism for electron capture Electroninduced Waterloss from

  18. Agreement, Release, and Waiver for Use of Bicycle Parking Room Page 1 of 3

    E-Print Network [OSTI]

    Ottino, Julio M.

    Agreement, Release, and Waiver for Use of Bicycle Parking Room Page 1 of 3 Northwestern University, IL 60611 BICYCLE PARKING AGREEMENT AGREEMENT, RELEASE, AND WAIVER FOR USE OF BICYCLE PARKING ROOM defined herein), subject to space availability, for parking one bicycle during Licensee's work day, which

  19. DOE Petitions for NRC Review in Yucca Mountain Proceeding

    Broader source: Energy.gov [DOE]

    The United States Department of Energy today filed with the Nuclear Regulatory Commission a petition requesting that the Commission review and reverse an order by the NRC’s Atomic Safety and...

  20. Exhibit 2B-Petition for Advance Waiver of Patent Rights UT-B Contracts Div Page 1 of 4

    E-Print Network [OSTI]

    or first actually reduced to practice in performance of the contract that may be awarded as a result the activity that is issuing your award or the Assistant General Counsel for Technology Transfer be subject to the Government license, march-in rights and preference for U.S. Industry set forth in 35 U

  1. Attachment 1 - Performance Work Statement

    National Nuclear Security Administration (NNSA)

    including TTR. Waste acceptance services will be performed at the NNSS and at waste generator sites. DE-SOL-0005982 Attachment 1 Page 1 2. Scope of Work 2.1 Requirement: The EPS...

  2. Hamiltonian Dynamics of Preferential Attachment

    E-Print Network [OSTI]

    Zuev, Konstantin; Krioukov, Dmitri

    2015-01-01

    Prediction and control of network dynamics are grand-challenge problems in network science. The lack of understanding of fundamental laws driving the dynamics of networks is among the reasons why many practical problems of great significance remain unsolved for decades. Here we study the dynamics of networks evolving according to preferential attachment, known to approximate well the large-scale growth dynamics of a variety of real networks. We show that this dynamics is Hamiltonian, thus casting the study of complex networks dynamics to the powerful canonical formalism, in which the time evolution of a dynamical system is described by Hamilton's equations. We derive the explicit form of the Hamiltonian that governs network growth in preferential attachment. This Hamiltonian turns out to be nearly identical to graph energy in the configuration model, which shows that the ensemble of random graphs generated by preferential attachment is nearly identical to the ensemble of random graphs with scale-free degree d...

  3. Class_Waiver_NPUA-2.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based Fuels|Programs |Chart ofClark Energy Group ESCOClass_Waiver_NPUA-2.pdf

  4. Class Patent Waiver W(C)2012-001 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2-001 Class Patent Waiver W(C)2012-001 This document waives certain patent rights the Department of Energy (DOE) has to inventions conceived or first actually reduced to practice...

  5. Advance Patent Waiver W(A)2009-016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    16 Advance Patent Waiver W(A)2009-016 This document waives certain patent rights the Department of Energy (DOE) has to inventions conceived or first actually reduced to practice by...

  6. Advance Patent Waiver W(A)2009-058 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    09-058 Advance Patent Waiver W(A)2009-058 This document waives certain patent rights the Department of Energy (DOE) has to inventions conceived or first actually reduced to...

  7. A Mixed Methods Investigation of the Kansas Autism Waiver's Implementation: The First Three Years

    E-Print Network [OSTI]

    Perrin, Nanette L.

    2012-08-31

    This mixed methods study employed quantitative and qualitative methods as means of evaluating the Kansas Autism Waiver's first three years of implementation. The study was guided by the components of a quality assurance analysis and, to the extent...

  8. Hamiltonian Dynamics of Preferential Attachment

    E-Print Network [OSTI]

    Konstantin Zuev; Fragkiskos Papadopoulos; Dmitri Krioukov

    2015-04-29

    Prediction and control of network dynamics are grand-challenge problems in network science. The lack of understanding of fundamental laws driving the dynamics of networks is among the reasons why many practical problems of great significance remain unsolved for decades. Here we study the dynamics of networks evolving according to preferential attachment, known to approximate well the large-scale growth dynamics of a variety of real networks. We show that this dynamics is Hamiltonian, thus casting the study of complex networks dynamics to the powerful canonical formalism, in which the time evolution of a dynamical system is described by Hamilton's equations. We derive the explicit form of the Hamiltonian that governs network growth in preferential attachment. This Hamiltonian turns out to be nearly identical to graph energy in the configuration model, which shows that the ensemble of random graphs generated by preferential attachment is nearly identical to the ensemble of random graphs with scale-free degree distributions. In other words, preferential attachment generates nothing but random graphs with power-law degree distribution. The extension of the developed canonical formalism for network analysis to richer geometric network models with non-degenerate groups of symmetries may eventually lead to a system of equations describing network dynamics at small scales.

  9. XII.1-Draft ATTACHMENT XII

    E-Print Network [OSTI]

    Kentucky, University of

    from the catalysis research work on Fischer- Tropsch synthesis work and the reaction engineering. Because of its experience with others in the Fischer-Tropsch Synthesis, the Badger Company was invitedXII.1-Draft ATTACHMENT XII Review of Fischer-Tropsch Work by Gulf Oil The Gulf-Badger process leads

  10. Attachment FY2011-75 OPAM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OPAM Attachment FY2011-75 OPAM Federal Supply Schedules Attachment FY2011-75 OPAM More Documents & Publications Chapter 8 - Required Sources of Supplies and Services Attachment...

  11. Attached is Policy Flash 2013-44 Acquisition Guide- Allowability...

    Energy Savers [EERE]

    Attached is Policy Flash 2013-44 Acquisition Guide- Allowability of Incurred Costs Attached is Policy Flash 2013-44 Acquisition Guide- Allowability of Incurred Costs Attached is...

  12. Microsoft Word - Policy Flash 2010-77 Attachment | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 Attachment Microsoft Word - Policy Flash 2010-77 Attachment Microsoft Word - Policy Flash 2010-77 Attachment More Documents & Publications Microsoft Word - Policy Flash 2010-78...

  13. Microsoft Word - Attachment 3 Recovery Act notification | Department...

    Energy Savers [EERE]

    Microsoft Word - Attachment 3 Recovery Act notification Microsoft Word - Attachment 3 Recovery Act notification More Documents & Publications Microsoft Word - Attachment 3 Recovery...

  14. Microsoft Word - Policy Flash 2010-81 Attachment 1 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 More Documents & Publications Microsoft Word - Policy Flash...

  15. River Corridor Closure Contract Section J, Attachment...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DE-AC06-05RL14655 Mod 459 1 ATTACHMENT J-6 ADVANCE AGREEMENT, PERSONNEL, AND RELATED COSTS This attachment will be prepared subsequent to Contract award pursuant to Clause H.15,...

  16. DOE Publishes Petition of CSA Group for Classification as a Nationally...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Classification as a Nationally Recognized Certification Program for Small Electric Motors DOE Publishes Petition of CSA Group for Classification as a Nationally Recognized...

  17. ATTACHMENT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsicloudden Documentation DataStreamsTotalproposals duenationalMeeting - JuneCOMMISSION

  18. ATTACHMENT

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p u t y A s sconveyance of9, 2013 ASERATI Allegheny

  19. Split ring containment attachment device

    DOE Patents [OSTI]

    Sammel, Alfred G. (Pittsburgh, PA)

    1996-01-01

    A containment attachment device 10 for operatively connecting a glovebag 200 to plastic sheeting 100 covering hazardous material. The device 10 includes an inner split ring member 20 connected on one end 22 to a middle ring member 30 wherein the free end 21 of the split ring member 20 is inserted through a slit 101 in the plastic sheeting 100 to captively engage a generally circular portion of the plastic sheeting 100. A collar potion 41 having an outer ring portion 42 is provided with fastening means 51 for securing the device 10 together wherein the glovebag 200 is operatively connected to the collar portion 41.

  20. Adult attachment style and romantic lovestyle orientation 

    E-Print Network [OSTI]

    Gordon, Melanie Nadine

    1990-01-01

    This study explores the link between attachment theory, developed by Bowlby, Ainsworth, and others, and the adult romantic lovestyle theory developed by Alan Lee. It was hypothesized that one's attachment style to mother, father, and romantic love partner... be correlated with one's lovestyle. Hazan and Shaver's (1987) adult attachment measure and Hendrick, Hendrick, Foote, and Slapion-Foote's (1984) Love Attitudes Scale were employed. In addition, a 36-item Likert-type scale was developed to quantify...

  1. Methane production by attached film

    DOE Patents [OSTI]

    Jewell, William J. (202 Eastwood Ave., Ithaca, NY 14850)

    1981-01-01

    A method for purifying wastewater of biodegradable organics by converting the organics to methane and carbon dioxide gases is disclosed, characterized by the use of an anaerobic attached film expanded bed reactor for the reaction process. Dilute organic waste material is initially seeded with a heterogeneous anaerobic bacteria population including a methane-producing bacteria. The seeded organic waste material is introduced into the bottom of the expanded bed reactor which includes a particulate support media coated with a polysaccharide film. A low-velocity upward flow of the organic waste material is established through the bed during which the attached bacterial film reacts with the organic material to produce methane and carbon dioxide gases, purified water, and a small amount of residual effluent material. The residual effluent material is filtered by the film as it flows upwardly through the reactor bed. In a preferred embodiment, partially treated effluent material is recycled from the top of the bed to the bottom of the bed for further treatment. The methane and carbon dioxide gases are then separated from the residual effluent material and purified water.

  2. Appendix DATA Attachment A: WIPP Borehole Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A: WIPP Borehole Update United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment A: WIPP Borehole...

  3. Sex, attachment, and the development of reproductive

    E-Print Network [OSTI]

    Maestripieri, Dario

    an integrated evolutionary model of the development of attachment and human reproductive strategies In this article, I present an integrated evolutionary model of the development of attachment and reproductive strat- egies in humans. The model is built on the foundations of life history theory, parental

  4. Attachment FY2011-46(4) OPAM | Department of Energy

    Energy Savers [EERE]

    Attachment FY2011-46(4) OPAM Attachment FY2011-46(4) OPAM Types of Compliance Requirements Chart Attachment FY2011-46(4) OPAM More Documents & Publications For-Profit Audit...

  5. Attachment FY2011-46(3) | Department of Energy

    Energy Savers [EERE]

    3) Attachment FY2011-46(3) PROGRAM-SPECIFIC COMPLIANCE SUPPLEMENTS Attachment FY2011-46(3) More Documents & Publications FLASH2011-46-OPAM Attachment FY2011-46(1) OPAM...

  6. Attachment FY2011-83 OPAM | Department of Energy

    Office of Environmental Management (EM)

    3 OPAM Attachment FY2011-83 OPAM Federal Supply Schedules Attachment FY2011-83 OPAM More Documents & Publications Chapter 8 - Required Sources of Supplies and Services Attachment...

  7. Microsoft Word - Policy Flash 2010-81 Attachment 2 | Department...

    Office of Environmental Management (EM)

    81 Attachment 2 Microsoft Word - Policy Flash 2010-81 Attachment 2 Microsoft Word - Policy Flash 2010-81 Attachment 2 More Documents & Publications ATTACHMENTFLASH2010.81(2)-OPAM...

  8. Microsoft Word - Policy Flash 2011-2 Attachment 1 | Department...

    Energy Savers [EERE]

    Microsoft Word - Policy Flash 2011-2 Attachment 1 Microsoft Word - Policy Flash 2011-2 Attachment 1 Microsoft Word - Policy Flash 2011-2 Attachment 1 More Documents & Publications...

  9. Microsoft Word - Policy Flash 2010-81 Attachment 1 | Department...

    Energy Savers [EERE]

    Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 More Documents &...

  10. Microsoft Word - Policy Flash 2010-67 Attachment 1 | Department...

    Office of Environmental Management (EM)

    67 Attachment 1 Microsoft Word - Policy Flash 2010-67 Attachment 1 Microsoft Word - Policy Flash 2010-67 Attachment 1 More Documents & Publications Acquisition Letter 2009-03...

  11. Attachment FY2011-77 OPAM | Department of Energy

    Office of Environmental Management (EM)

    7 OPAM Attachment FY2011-77 OPAM Data Quality Plan Attachment FY2011-77 OPAM More Documents & Publications Policy Flash 2011-77 Attachment 2 Source Selection Guide Source Selection...

  12. Attachment 3: Instructions for Use of Green Lease Solicitation...

    Energy Savers [EERE]

    Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart...

  13. Attachment 2: Solicitation for Offers with New and Revised Green...

    Energy Savers [EERE]

    Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text PDF icon Solicitation for...

  14. Attachment 1: Green Lease Policies and Procedures for Lease Acquisitio...

    Energy Savers [EERE]

    Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition PDF icon Green Lease Policies and...

  15. Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements (Book)

    SciTech Connect (OSTI)

    Not Available

    2010-11-01

    This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

  16. Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements

    SciTech Connect (OSTI)

    Not Available

    2013-03-01

    This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

  17. Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements (Book)

    SciTech Connect (OSTI)

    Sears, T.

    2014-01-01

    This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

  18. Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-06-01

    This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

  19. San Francisco State University -IMMUNIZATION REQUIREMENTS MEDICAL WAIVER REQUEST FORM All students must provide proof of immunization before they may register for classes.

    E-Print Network [OSTI]

    Ovchinnikov, Sergei

    San Francisco State University - IMMUNIZATION REQUIREMENTS MEDICAL WAIVER REQUEST FORM All students? Registrar's Office, SSB 101 San Francisco State University 1600 Holloway Avenue San Francisco, CA 94132

  20. DOE - Office of Legacy Management -- Rocky Flats Petition

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouth DakotaRobbins and700, 1.Reports FernaldNew ProcessingPetition

  1. Information seeking in attachment style romantic relationships 

    E-Print Network [OSTI]

    Derrick, Jaye Lindsay

    2013-02-22

    seeking about relationship items. No hypotheses were formed for attachment avoidance, and the degree of avoidance alone did not significantly predict information seeking. However, not condition and relationship satisfaction contributed to several...

  2. Chemomechanics of attached and suspended cells

    E-Print Network [OSTI]

    Maloney, John Mapes

    2012-01-01

    Chemomechanical coupling in single eukaryotic animal cells is investigated in the con- text of the attached (substratum-adhered) and the suspended (free-floating) states. These dichotomous configurations determine behavioral ...

  3. ATTACHMENT 1 Washington State University Vancouver

    E-Print Network [OSTI]

    ATTACHMENT 1 Washington State University Vancouver Stormwater Management Program (SWMP) WSU PERMIT VANCOUVER STORMWATER MANAGEMENT PROGRAM TABLE OF CONTENTS S6.A Stormwater Management Program (SWMP Site Stormwater Runoff Control_______________________ 8 S6.D.5 Post-Construction Stormwater Management

  4. Reactive Attachment Disorder: Concepts, Treatment, and Research

    E-Print Network [OSTI]

    Walter, Uta M.; Petr, Chris

    2004-06-01

    Reactive Attachment Disorder (RAD) is a disorder characterized by controversy, both with respect to its definition and its treatment. By definition, the RAD diagnosis attempts to characterize and explain the origin of certain troubling behaviors...

  5. Configurations of polymers attached to probes

    E-Print Network [OSTI]

    Bubis, Roy

    We study polymers attached to spherical (circular) or paraboloidal (parabolic) probes in three (two) dimensions. Both self-avoiding and random walks are examined numerically. The behavior of a polymer of size R[subscript ...

  6. Aggressive children's memory for attachment relevant information 

    E-Print Network [OSTI]

    Collie, Claire Futamase

    2004-09-30

    MEMORY FOR ATTACHMENT RELEVANT INFORMATION A Dissertation by CLAIRE FUTAMASE COLLIE Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR... OF PHILOSOPHY May 2004 Major Subject: Psychology AGGRESSIVE CHILDREN?S MEMORY FOR ATTACHMENT RELEVANT INFORMATION A Dissertation by CLAIRE FUTAMASE COLLIE Submitted to Texas A&M University in partial...

  7. Thermal electron attachment to SO3

    SciTech Connect (OSTI)

    Miller, T.M.; Viggiano, A.A.; Arnold, S.T.; Jayne, J.T.

    1995-04-15

    The rate constant for electron attachment to SO3 is 3 + or - 1 x 10(exp-9) cu cm/s at 300 K, measured in helium gas at pressures from 53 to 160 Pa (0.4 to 1.2 torr). The sole product of attachment is SO3(-) under these conditions. The same rate constant and ionic product were obtained at 400 and 505 K. The measurements were carried out using a flowing-afterglow Langmuir-probe apparatus.

  8. AUAARHUS UNIVERSITY Adding of attachments Financial Control

    E-Print Network [OSTI]

    , and the picture file from this scan must be saved (on a PC or server) before the file is added to the expense sheet. Important: Attachments must be saved in PDF or TIF format. If the attachment is not added in one address or save the picture file on your PC or a server. Open the file and save it on your PC #12;AUAARHUS

  9. Oregon - OAR 860-025-0030 - Petition for CPCN for Construction...

    Open Energy Info (EERE)

    Oregon - OAR 860-025-0030 - Petition for CPCN for Construction of Overhead Transmission Lines Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

  10. Composite attachment: the Trek bottom bracket 

    E-Print Network [OSTI]

    Mallard, David

    2013-02-22

    to b'e attached to the frame. The: ='-rr, , ;j, ,tie~. ' =-;, ""~ jj, , ', ' bottom bracket attachment fails the most. often. 's, ~;, . s' C r tp; rac e&j' g~tn f, e'. ' " - -:--'=. '- e. x eii yc i oads, . ; a n n, enforce, applie'd to. 'the...'g the geometry tools, :. The r'esultant'surfaces were ', ' , '~"'", -'1Id~aterial properties were a lied to'each eleme' t of the, 'inodel The material wa's defined, a)ered compo e A' tuiii a tlayer). pro, e "j'as"'Ilefinedeand then the compyoesite...

  11. Methods of attaching erosion-resistant nonmetallic panels

    SciTech Connect (OSTI)

    Girzhel, A.M.

    1984-01-01

    Attachment methods for panels of wear-resistant nonmetallic materials, e.g. cast stone and slag, devitrified slag, and erosion-resistant and heat-resistant concretes to protect hopper, chute, and trough structures at metallurgical and coal industries have been investigated. Attachment methods can be divided into two groups, attachment by adhesives and by mechanical attachment. A new method of mechanical attachment, considered to be much superior to adhesive attachment, provides for reliable fastening without damage to the protected metal structure. Various panel designs may be used depending on the operating conditions.

  12. ATTACHMENT 1 Export Control Decision Tree 1

    E-Print Network [OSTI]

    Jiang, Jiancheng

    ATTACHMENT 1 Export Control Decision Tree 1 for Travel or Shipping to Foreign Countries or Sharing Information with Foreign Nationals United States export controls exist to protect the national security and foreign policy interests of this country. Export controls govern the shipment, transmission, or transfer

  13. ATTACHMENT 2 UNC Charlotte Export Control Checklist

    E-Print Network [OSTI]

    Jiang, Jiancheng

    ATTACHMENT 2 UNC Charlotte Export Control Checklist [FOR FOREIGN TRAVEL WITH UNIVERSITY OWNED EQUIPMENT] License Exception TMP (Temporary Exports) This checklist summarizes the requirements for an export license exception for temporary export of a laptop, PDA, cell phone, or digital storage device

  14. Page 1 of 5 ATTACHMENT 4

    E-Print Network [OSTI]

    Page 1 of 5 ATTACHMENT 4 NREL Guidelines for Preparing a Subcontractor's Health and Safety Plan ­ Non-Construction NREL requires that all activities at the NREL facilities shall be conducted at the NREL facilities shall be required to submit a site specific safety plan that addresses environment

  15. IT Operational Oversight Committee Canvas Report Attachment

    E-Print Network [OSTI]

    Pittendrigh, Barry

    IT Operational Oversight Committee Canvas Report Attachment May 20, 2014 Investigate the Canvas Technologist, ITaP George McCabe Professor, Department of Statistics and Associate Dean, College of Science and maintenance during planned cycles. Its wide-spread use on campus requires careful consideration when looking

  16. Quantization of a string with attached mass

    E-Print Network [OSTI]

    A. Lewis Licht

    2011-08-02

    A simple model of a relativistic open string with a point mass attached at one end is quantized. The normal modes are derived and used to construct expressions for the operator commutators. Light cone gauge is used to find the mass squared operator. The singular part of the operator product expansion is derived.

  17. THERMOPHILE ENDOSPORES HAVE RESPONSIVE EXOSPORIUM FOR ATTACHMENT

    SciTech Connect (OSTI)

    PANESSA-WARREN,B.; TORTORA,G.T.; WARREN,J.; SABATINI,R.

    1999-08-01

    Recently studies examining the colonization of Clostridial pathogens on agar and human tissue culture cells, demonstrated that (C. sporogenes ATCC 3584, C. difficile ATCC 43594 [patient isolate], C. difficile ATCC 9689 [non-clinical], C. clostridioforme [patient isolate]) bacterial spores (endospores) of the genus Clostridia have an outer membrane that becomes responsive at activation and exhibits extensions of the exosporial membrane that facilitate and maintain spore attachment to a nutritive substrate during germination and initial outgrowth of the newly developed bacterial cell. Therefore this attachment phenomenon plays an important role in insuring bacterial colonization of a surface and the initial stages of the infective process. To see if other non-clinical members of this genus also have this ability to attach to a substrate or food-source during spore germination, and how this attachment process in environmental thermophiles compares to the clinical paradigm (in relation to time sequence, exosporial membrane structure, type of attachment structures, composition of the membrane etc...), sediment samples were collected in sterile transport containers at 4 geothermal sites at Yellowstone National Park in Wyoming. Because spore forming bacteria will produce spores when conditions are unfavorable for growth, the samples were sealed and stored at 4 C. After 8 months the samples were screened for the presence of spores by light microscope examination using malachite green/safranin, and traditional endospores were identified in significant quantities from the Terrace Spring site (a 46 C lake with bacterial mats and a rapidly moving run-off channel leading to a traditional hot spring). The highest spore population was found in the top sediment and benthic water of the run-off channel, pH 8.1.

  18. Attachment FY2011-12 | Department of Energy

    Office of Environmental Management (EM)

    2 Attachment FY2011-12 Indirect Cost Rate Administration Attachment FY2011-12 More Documents & Publications AcqGuide42pt1.doc&0; Acquisition Letter No. AL 2008-02 Department of...

  19. Dual-shank attachment design for omega seals

    DOE Patents [OSTI]

    Sattinger, Stanley S. (Pittsburgh, PA)

    1978-01-01

    An improved apparatus and process for attaching welded omega seal segments to reactor heads, standpipes, mechanisms, and plugs comprises a first shank in combination with a second shank to attach an omega seal at a metal-to-metal interface.

  20. Flash2010-16Attachment.pdf | Department of Energy

    Energy Savers [EERE]

    ash2010-16Attachment.pdf Flash2010-16Attachment.pdf More Documents & Publications Flash2010-16.pdf Federal Acquisition Regulation; Federal Acquisition Circular Policy Flash 2012-56...

  1. Attachment working models and false recall: a category structure approach 

    E-Print Network [OSTI]

    Wilson, Carol Leigh

    2009-06-02

    Two studies were conducted to test the central hypothesis that internal working models of attachment will influence false memory in a model-congruent pattern. Participants in both studies were first primed with a relationship-specific attachment...

  2. Attachment FY2011-06 OPAM | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    SUMMARY OF PUBLIC LAW 111-240, THE SMALL BUSINESS JOBS ACT OF 2010 Attachment FY2011-06 OPAM More Documents & Publications Attachment FY2011-28 OPAM Chapter 19 - Small Business...

  3. Cable attachment for a radioactive brachytherapy source capsule

    DOE Patents [OSTI]

    Gross, Ian G; Pierce, Larry A

    2006-07-18

    In cancer brachytherapy treatment, a small californium-252 neutron source capsule is attached to a guide cable using a modified crimping technique. The guide cable has a solid cylindrical end, and the attachment employs circumferential grooves micromachined in the solid cable end. The attachment was designed and tested, and hardware fabricated for use inside a radioactive hot cell. A welding step typically required in other cable attachments is avoided.

  4. Photoswitchable method for the ordered attachment of proteins to surfaces

    DOE Patents [OSTI]

    Camarero, Julio A. (Livermore, CA); DeYoreo, James J. (Clayton, CA); Kwon, Youngeun (Livermore, CA)

    2011-07-05

    Described herein is a method for the attachment of proteins to any solid support with control over the orientation of the attachment. The method is extremely efficient, not requiring the previous purification of the protein to be attached, and can be activated by UV-light. Spatially addressable arrays of multiple protein components can be generated by using standard photolithographic techniques.

  5. Photoswitchable method for the ordered attachment of proteins to surfaces

    DOE Patents [OSTI]

    Camarero, Julio A.; De Yoreo, James J.; Kwon, Youngeun

    2010-04-20

    Described herein is a method for the attachment of proteins to any solid support with control over the orientation of the attachment. The method is extremely efficient, not requiring the previous purification of the protein to be attached, and can be activated by UV-light. Spatially addressable arrays of multiple protein components can be generated by using standard photolithographic techniques.

  6. No-migration variance petition: Draft. Volume 4, Appendices DIF, GAS, GCR (Volume 1)

    SciTech Connect (OSTI)

    1995-05-31

    The Department of Energy is responsible for the disposition of transuranic (TRU) waste generated by national defense-related activities. Approximately 2.6 million cubic feet of the se waste have been generated and are stored at various facilities across the country. The Waste Isolation Pilot Plant (WIPP), was sited and constructed to meet stringent disposal requirements. In order to permanently dispose of TRU waste, the DOE has elected to petition the US EPA for a variance from the Land Disposal Restrictions of RCRA. This document fulfills the reporting requirements for the petition. This report is volume 4 of the petition which presents details about the transport characteristics across drum filter vents and polymer bags; gas generation reactions and rates during long-term WIPP operation; and geological characterization of the WIPP site.

  7. Microsoft Word - Flash2008-09Attachment.doc | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    9Attachment.doc More Documents & Publications Flash2007-02Attachment.doc&0; Microsoft Word - AL2000-05Attachment.doc Flash2007-03Attachment.doc&0;...

  8. Interpersonal violence, drug use, and adult attachment 

    E-Print Network [OSTI]

    Murphy, Amy Anne

    2013-02-22

    Gruder et al. (1996), nearly third (31. 75'/0) of their sample reported at least one negative sexual experience. Sexual trauma may create the inost severe and long-lasting effects. In a study by Valentiner, Foa, Riggs, and Gershuny (1996), PTSD symptoms.... Interpersonal Violence 23 References American Psychiatric Association. (1994). Dia ostic and Statistical Manual Fou h Edition. Bowlby, J. (1980). Attachment and Loss: Volume 3. Loss Sadness and de ression. New York: Basic Books. Brondy, T. , & Davidson, E...

  9. Cladding Attachment Over Thick Exterior Insulating Sheathing

    SciTech Connect (OSTI)

    Baker, P.; Eng, P.; Lepage, R.

    2014-01-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1. What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2. Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3. What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

  10. Cladding Attachment Over Thick Exterior Insulating Sheathing

    SciTech Connect (OSTI)

    Baker, P.; Eng, P.; Lepage, R.

    2014-01-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1.What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2.Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3.What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

  11. List of EERE Waivers in the Federal Register | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICE INDUSTRIALU.S.Leadership on CleanUpList of EERE Waivers in the Federal

  12. WAIVER OF INVENTOR'S SHARE OF LICENSING INCOME Cornell University's policy on the distribution of technology transfer licensing revenues

    E-Print Network [OSTI]

    Chen, Tsuhan

    WAIVER OF INVENTOR'S SHARE OF LICENSING INCOME Cornell University's policy on the distribution faculty who are inventors or developers ("inventors") of the licensed intellectual property. Occasionally, a Cornell inventor will desire to waive the inventor's personal share of revenues. The Internal Revenue

  13. Waste Isolation Pilot Plant No-Migration Variance Petition. Revision 1, Volume 1

    SciTech Connect (OSTI)

    Hunt, Arlen

    1990-03-01

    The purpose of the WIPP No-Migration Variance Petition is to demonstrate, according to the requirements of RCRA {section}3004(d) and 40 CFR {section}268.6, that to a reasonable degree of certainty, there will be no migration of hazardous constituents from the facility for as long as the wastes remain hazardous. The DOE submitted the petition to the EPA in March 1989. Upon completion of its initial review, the EPA provided to DOE a Notice of Deficiencies (NOD). DOE responded to the EPA`s NOD and met with the EPA`s reviewers of the petition several times during 1989. In August 1989, EPA requested that DOE submit significant additional information addressing a variety of topics including: waste characterization, ground water hydrology, geology and dissolution features, monitoring programs, the gas generation test program, and other aspects of the project. This additional information was provided to EPA in January 1990 when DOE submitted Revision 1 of the Addendum to the petition. For clarity and ease of review, this document includes all of these submittals, and the information has been updated where appropriate. This document is divided into the following sections: Introduction, 1.0: Facility Description, 2.0: Waste Description, 3.0; Site Characterization, 4.0; Environmental Impact Analysis, 5.0; Prediction and Assessment of Infrequent Events, 6.0; and References, 7.0.

  14. CIVIL & ENVIRONMENTAL ENGINEERING STUDENT PETITION to REMOVE REGISTRATION/RECORDS HOLDS

    E-Print Network [OSTI]

    CIVIL & ENVIRONMENTAL ENGINEERING STUDENT PETITION to REMOVE REGISTRATION/RECORDS HOLDS etc.) Total number of credits in major or minor program Degree 1 CEE Civil & Envr Engineering BSCE 180 Graduating Senior Priority (GSP) status. #12;CIVIL & ENVIRONMENTAL ENGINEERING Qtr: Year: Qtr: Year: Course

  15. THE UNIVERSITY OF OKLAHOMA PETITION FOR IN-STATE TUITION CLASSIFICATION

    E-Print Network [OSTI]

    Oklahoma, University of

    THE UNIVERSITY OF OKLAHOMA PETITION FOR IN-STATE TUITION CLASSIFICATION Office of Admissions 1000 from an Oklahoma high school? YES NO NAME AND LOCATION OF HIGH SCHOOL Have you attended a college or university in Oklahoma during the past two years? YES NO IF YES, COMPLETE AREA BELOW. LIST INSTITUTIONS

  16. PRINT ONLY: ASTROBIOLOGY Horner J. Mousis O. Petit J.-M. Jones B. W.

    E-Print Network [OSTI]

    Rathbun, Julie A.

    Regimes of the Terrestrial Planets [#1179] We present detailed results on the similarities and differences by kinetic and thermodynamic equilibrium modeling studies, are in stark contrast to the chemically pure ALH THE IMPACT REGIMES OF THE TERRESTRIAL PLANETS. J. Horner1 , O. Mousis2,3 , J.-M. Petit3 , and B. W. Jones1

  17. Attachments Energy Ratings Council | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based Fuels Research atDepartment ofAtlanta CommunityProposedA PageAttachments

  18. Microsoft Word - ATTACHMENT A Suppl 5.doc

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested Parties - WAPAEnergy May2.doc Microsoft Word -5.docATTACHMENT A: Modeling

  19. Predicting Envelope Leakage in Attached Dwellings

    SciTech Connect (OSTI)

    Faakye, O.; Arena, L.; Griffiths, D.

    2013-07-01

    The most common method for measuring air leakage is to use a single blower door to pressurize and/or depressurize the test unit. In detached housing, the test unit is the entire home and the single blower door measures air leakage to the outside. In attached housing, this 'single unit', 'total', or 'solo' test method measures both the air leakage between adjacent units through common surfaces as well air leakage to the outside. Measuring and minimizing this total leakage is recommended to avoid indoor air quality issues between units, reduce energy losses to the outside, reduce pressure differentials between units, and control stack effect. However, two significant limitations of the total leakage measurement in attached housing are: for retrofit work, if total leakage is assumed to be all to the outside, the energy benefits of air sealing can be significantly over predicted; for new construction, the total leakage values may result in failing to meet an energy-based house tightness program criterion. The scope of this research is to investigate an approach for developing a viable simplified algorithm that can be used by contractors to assess energy efficiency program qualification and/or compliance based upon solo test results.

  20. FLASH2003-12attachment.pdf | Department of Energy

    Office of Environmental Management (EM)

    FLASH2003-12attachment.pdf More Documents & Publications Flash2004-19.pdf Document DOE Princeton Plasma Physics Laboratory Purchase Power Agreement Request for Proposal...

  1. Attachment FY2011-44 OPAM | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    "Myth-Busting": Addressing Misconceptions to Improve Communication with Industry during the Acquisition Process Attachment FY2011-44 OPAM More Documents & Publications Policy Flash...

  2. Certification and Rating of Attachments for Fenestration Technologies...

    Office of Environmental Management (EM)

    The successful applicant will also develop a Program to rate fenestration attachment energy performance and provide accurate and useful product comparison criteria, allowing...

  3. Attachment 3: Instructions for Use of Green Lease Solicitation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart PDF icon...

  4. Attachment 2: Solicitation for Offers with New and Revised Green...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text PDF icon Solicitation for Offers...

  5. Attachment 1: Green Lease Policies and Procedures for Lease Acquisitio...

    Energy Savers [EERE]

    1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition PDF icon Green Lease Policies and Procedures...

  6. Part III - List of Documents, Exhibits, and Other Attachments

    National Nuclear Security Administration (NNSA)

    Nuclear Facilities 150 100510 DOE O 426.2, Attachment 1 CRD 042110 Personnel Selection, Training, Qualification, and Certification Requirements for DOE Nuclear Facilities...

  7. Microsoft Word - Policy Flash 2010-82 Attachment 1 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    2 Attachment 1 More Documents & Publications Policy Flash 2010-82 Microsoft Word - Policy Flash 2008-07.doc Microsoft Word - Policy Flash 2008-10.doc...

  8. 2014-06-23 Issuance: Energy Conservation Standards for Walk-in Coolers and Freezers; Air-Conditioning, Heating, & Refrigeration Institute Petition for Reconsideration

    Office of Energy Efficiency and Renewable Energy (EERE)

    This document is the agency response to the Energy Conservation Standards for Walk-in Coolers and Freezers; Air-Conditioning, Heating, & Refrigeration Institute Petition for Reconsideration.

  9. Dissociative electron attachment studies on acetone

    SciTech Connect (OSTI)

    Prabhudesai, Vaibhav S. Tadsare, Vishvesh; Ghosh, Sanat; Gope, Krishnendu; Davis, Daly; Krishnakumar, E.

    2014-10-28

    Dissociative electron attachment (DEA) to acetone is studied in terms of the absolute cross section for various fragment channels in the electron energy range of 0–20 eV. H{sup ?} is found to be the most dominant fragment followed by O{sup ?} and OH{sup ?} with only one resonance peak between 8 and 9 eV. The DEA dynamics is studied by measuring the angular distribution and kinetic energy distribution of fragment anions using Velocity Slice Imaging technique. The kinetic energy and angular distribution of H{sup ?} and O{sup ?} fragments suggest a many body break-up for the lone resonance observed. The ab initio calculations show that electron is captured in the multi-centered anti-bonding molecular orbital which would lead to a many body break-up of the resonance.

  10. Vacuum die attach for integrated circuits

    DOE Patents [OSTI]

    Schmitt, E.H.; Tuckerman, D.B.

    1991-09-10

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required. 1 figure.

  11. Journal Attachments New in PSoft 9.1 is the ability to attach supporting documentation directly into your GL Journal. Should

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Journal Attachments New in PSoft 9.1 is the ability to attach supporting documentation directly into your GL Journal. Should you chose this option you would not need to print your Journals as the support is electronically attached. Attachments to Journals can be done at any time; while creating the Journal or after

  12. Microsoft Word - Flash2008-08attachmentFAC22.doc | Department...

    Energy Savers [EERE]

    Flash2008-08attachmentFAC22.doc Microsoft Word - Flash2008-08attachmentFAC22.doc Microsoft Word - Flash2008-08attachmentFAC22.doc More Documents & Publications Policy Flash 2013-75...

  13. UC Santa Barbara Attachment 5150 C Issuing Unit: Administrative Services Date: September 1, 1982

    E-Print Network [OSTI]

    by law. Page 1 of 25150 Payment to Aliens (Attachment C) 9/17/2007http to Aliens (Attachment C) 9/17/2007http://www.policy.ucsb.edu/vcas/accounting/5150_attach_c.html #12;

  14. Waste Isolation Pilot Plant no-migration variance petition. Executive summary

    SciTech Connect (OSTI)

    Not Available

    1990-12-31

    Section 3004 of RCRA allows EPA to grant a variance from the land disposal restrictions when a demonstration can be made that, to a reasonable degree of certainty, there will be no migration of hazardous constituents from the disposal unit for as long as the waste remains hazardous. Specific requirements for making this demonstration are found in 40 CFR 268.6, and EPA has published a draft guidance document to assist petitioners in preparing a variance request. Throughout the course of preparing this petition, technical staff from DOE, EPA, and their contractors have met frequently to discuss and attempt to resolve issues specific to radioactive mixed waste and the WIPP facility. The DOE believes it meets or exceeds all requirements set forth for making a successful ``no-migration`` demonstration. The petition presents information under five general headings: (1) waste information; (2) site characterization; (3) facility information; (4) assessment of environmental impacts, including the results of waste mobility modeling; and (5) analysis of uncertainties. Additional background and supporting documentation is contained in the 15 appendices to the petition, as well as in an extensive addendum published in October 1989.

  15. Filament attachment dynamics in actin-based propulsion

    E-Print Network [OSTI]

    J. I. Katz; A. E. Carlsson

    2005-05-26

    Theory and experiment have established that F-actin filaments are strongly attached to the intracellular parasites (such as Listeria) they propel with ``comet tails''. We consider the implications of these observations for propulsion. By calculating the motion produced in various models of attachment and comparing to experiment we demonstrate that the attachment must be sliding rather than hinged. By modeling experiments on ActA-coated spheres we draw conclusions regarding the interaction between F-actin and their surfaces that may also be applicable to living systems.

  16. (1) in the attached material, we take a = 1

    E-Print Network [OSTI]

    1910-00-81

    Lab 4. Prior to Lab. Read the material on the back page. During the lab. In formula (1) in the attached material, we take a = 1, b = .5, c = .75 and d = .25. Thus, the ...

  17. Attachment FY2011-31 OPAM | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    attachment 3 flow chart of new 17.5 FAR Team update based on FAC2005-47 Dec 13, 2010 More Documents & Publications Flash2011-31 OPAM Flash2011-26 OPAM ATTACHMENTFLASH2011-26-OPAM...

  18. Appendix DATA Attachment B: WIPP Waste Containers and Emplacement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment B: WIPP Waste Containers and Emplacement Table of Contents DATA-B-1.0...

  19. Microsoft Word - Policy Flash 2010-78 Attachment 1 Unsuccessful...

    Office of Environmental Management (EM)

    1 Unsuccessful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 1 Unsuccessful Offeror Letter Template-Final 8-17-10 Microsoft Word -...

  20. Microsoft Word - Policy Flash 2010-78 Attachment 3 Conflicts...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Conflicts of Interest Cert- template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 3 Conflicts of Interest Cert- template-Final 8-17-10 Microsoft Word -...

  1. Microsoft Word - Policy Flash 2010-78 Attachment 2 Confidentiality...

    Energy Savers [EERE]

    2 Confidentiality Cert template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 2 Confidentiality Cert template-Final 8-17-10 Microsoft Word - Policy Flash...

  2. Microsoft Word - Policy Flash 2010-78 Attachment 4 Successful...

    Office of Environmental Management (EM)

    4 Successful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 4 Successful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy...

  3. Bicycle-powered attachments : designing for developing countries

    E-Print Network [OSTI]

    Wu, Jodie (Jodie Z.)

    2009-01-01

    There are 550 million smallholder farmers around the world who earn less than $1/day who could benefit from pedal-powered attachments. This project discusses factors to consider in designing for developing countries and ...

  4. Attachment FY2011-58 OPAM | Department of Energy

    Energy Savers [EERE]

    INFORMATION REPORTING Attachment FY2011-58 OPAM More Documents & Publications Chapter 35 - Research and Development Contracting AcqGuide35pt1rev2.doc&0; Federal Assistance...

  5. Relationship of attachment to abuse in incarcerated women 

    E-Print Network [OSTI]

    Davis, Brandon Lee

    2004-11-15

    a combination of traits of preoccupied and dismissing attachment styles. The fear of rejection is common in both fearful and preoccupied attachment styles. When Alexander (1993) administered questionnaires to 112 female incest survivors, she found... among female incest survivors. This study used 92 of 112 women from an earlier study by Alexander (1993). Alexander et al. (1998) found elevations on the avoidant scale of the MCMI-II more likely among women with fearful styles than with secure...

  6. Pressurizer with a mechanically attached surge nozzle thermal sleeve

    DOE Patents [OSTI]

    Wepfer, Robert M

    2014-03-25

    A thermal sleeve is mechanically attached to the bore of a surge nozzle of a pressurizer for the primary circuit of a pressurized water reactor steam generating system. The thermal sleeve is attached with a series of keys and slots which maintain the thermal sleeve centered in the nozzle while permitting thermal growth and restricting flow between the sleeve and the interior wall of the nozzle.

  7. Scaling and biomechanics of surface attachment in climbing animals

    E-Print Network [OSTI]

    Labonte, David; Federle, Walter

    2014-01-01

    -Type text/plain; charset=UTF-8 Review Cite this article: Labonte D, Federle W. 2015 Scaling and biomechanics of surface attach- ment in climbing animals. Phil. Trans. R. Soc. B 370: 20140027. http://dx.doi.org/10.1098/rstb.2014.0027 One contribution... of 19 to a discussion meeting issue ‘Cell adhesion century: culture breakthrough’. Subject Areas: biomaterials, biomechanics, biophysics Scaling and biomechanics of surface attachment in climbing animals on July 15, 2015http...

  8. Methods and materials for nanocrystalline surface coatings and attachment of peptide amphiphile nanofibers thereon

    DOE Patents [OSTI]

    Stupp, Samuel I. (Chicago, IL); Spoerke, Erik D. (Albuquerque, NM); Anthony, Shawn G. (New Stanton, PA); Niece; Krista L. (Evanston, IL)

    2008-06-24

    Biocompatible composites comprising peptide amphiphiles and surface modified substrates and related methods for attachment thereon.

  9. No-migration variance petition for the Waste Isolation Pilot Plant

    SciTech Connect (OSTI)

    Carnes, R.G.; Hart, J.S. ); Knudtsen, K. )

    1990-01-01

    The Waste Isolation Pilot Plant (WIPP) is a US Department of Energy (DOE) project to provide a research and development facility to demonstrate the safe disposal of radioactive waste resulting from US defense activities and programs. The DOE is developing the WIPP facility as a deep geologic repository in bedded salt for transuranic (TRU) waste currently stored at or generated by DOE defense installations. Approximately 60 percent of the wastes proposed to be emplaced in the WIPP are radioactive mixed wastes. Because such mixed wastes contain a hazardous chemical component, the WIPP is subject to requirements of the Resource Conservation and Recovery Act (RCRA). In 1984 Congress amended the RCRA with passage of the Hazardous and Solid Waste Amendments (HSWA), which established a stringent regulatory program to prohibit the land disposal of hazardous waste unless (1) the waste is treated to meet treatment standards or other requirements established by the Environmental Protection Agency (EPA) under {section}3004(n), or (2) the EPA determines that compliance with the land disposal restrictions is not required in order to protect human health and the environment. The DOE WIPP Project Office has prepared and submitted to the EPA a no-migration variance petition for the WIPP facility. The purpose of the petition is to demonstrate, according to the requirements of RCRA {section}3004(d) and 40 CFR {section}268.6, that to a reasonable degree of certainty, there will be no migration of hazardous constituents from the WIPP facility for as long as the wastes remain hazardous. This paper provides an overview of the petition and describes the EPA review process, including key issues that have emerged during the review. 5 refs.

  10. Conference Waiver

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    current events and issues of concern to DOE Emergency Management. Events such as Fukushima, the wild-land fires, and other catastrophic disasters have uncovered issues that...

  11. Conformational mechanism for the stability of microtubule-kinetochore attachments

    E-Print Network [OSTI]

    Zsolt Bertalan; Caterina A. M. La Porta; Helder Maiato; Stefano Zapperi

    2014-07-21

    Regulating the stability of microtubule(MT)-kinetochore attachments is fundamental to avoiding mitotic errors and ensure proper chromosome segregation during cell division. While biochemical factors involved in this process have been identified, its mechanics still needs to be better understood. Here we introduce and simulate a mechanical model of MT-kinetochore interactions in which the stability of the attachment is ruled by the geometrical conformations of curling MT-protofilaments entangled in kinetochore fibrils. The model allows us to reproduce with good accuracy in vitro experimental measurements of the detachment times of yeast kinetochores from MTs under external pulling forces. Numerical simulations suggest that geometrical features of MT-protofilaments may play an important role in the switch between stable and unstable attachments.

  12. The Fusion Core Complex of the Peste des Petits Ruminants Virus Is a Six-Helix Bundle Assembly

    E-Print Network [OSTI]

    Srinivasan, N.

    The Fusion Core Complex of the Peste des Petits Ruminants Virus Is a Six-Helix Bundle Assembly (PPRV) fusion protein (F) to obtain insights into the mechanism by which these repeats influence PPRV-mediated cell fusion. Both HR1 and HR2 inhibit PPRV-mediated syncytia formation in Vero cells in vitro. Of these

  13. Design of a navigation filter by analysis of local observability Pierre-Jean Bristeau, Nicolas Petit, Laurent Praly

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Design of a navigation filter by analysis of local observability Pierre-Jean Bristeau, Nicolas Petit, Laurent Praly Abstract-- This paper presents an inertial navigation filter designed. This results in temporally interconnected observers which are of the Kalman filter type. It is proven that each

  14. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, Mark A. (102 Foxhunt Dr., North Augusta, SC 29841); Zollinger, W. Thor (3927 Almon Dr., Martinez, GA 30907)

    1992-01-01

    An apparatus for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the KELLY VACUUM SYSTEM but can be modified for use with any standard mobile robot and cleaning tool.

  15. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, M.A.; Zollinger, W.T.

    1992-09-22

    An apparatus is described for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the Kelly Vacuum System but can be modified for use with any standard mobile robot and cleaning tool. 14 figs.

  16. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, M.A.; Zollinger, W.T.

    1991-01-01

    This invention is comprised of an apparatus for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the KELLY VACUUM SYSTEM but can be modified for use with any standard mobile robot and cleaning tool.

  17. Biocompatible implants and methods of making and attaching the same

    DOE Patents [OSTI]

    Rowley, Adrian P; Laude, Lucien D; Humayun, Mark S; Weiland, James D; Lotfi, Atoosa; Markland, Jr., Francis S

    2014-10-07

    The invention provides a biocompatible silicone implant that can be securely affixed to living tissue through interaction with integral membrane proteins (integrins). A silicone article containing a laser-activated surface is utilized to make the implant. One example is an implantable prosthesis to treat blindness caused by outer retinal degenerative diseases. The device bypasses damaged photoreceptors and electrically stimulates the undamaged neurons of the retina. Electrical stimulation is achieved using a silicone microelectrode array (MEA). A safe, protein adhesive is used in attaching the MEA to the retinal surface and assist in alleviating focal pressure effects. Methods of making and attaching such implants are also provided.

  18. Reliability Testing the Die-Attach of CPV Cell Assemblies

    SciTech Connect (OSTI)

    Bosco, N.; Sweet, C.; Kurtz, S.

    2011-02-01

    Results and progress are reported for a course of work to establish an efficient reliability test for the die-attach of CPV cell assemblies. Test vehicle design consists of a ~1 cm2 multijunction cell attached to a substrate via several processes. A thermal cycling sequence is developed in a test-to-failure protocol. Methods of detecting a failed or failing joint are prerequisite for this work; therefore both in-situ and non-destructive methods, including infrared imaging techniques, are being explored as a method to quickly detect non-ideal or failing bonds.

  19. Interface structure for hub and mass attachment in flywheel rotors

    DOE Patents [OSTI]

    Deteresa, S.J.; Groves, S.E.

    1998-06-02

    An interface structure is described for hub and mass attachment in flywheel rotors. The interface structure efficiently transmits high radial compression forces and withstands both large circumferential elongation and local stresses generated by mass-loading and hub attachments. The interface structure is comprised of high-strength fiber, such as glass and carbon, woven into an angle pattern which is about 45{degree} with respect to the rotor axis. The woven fiber is bonded by a ductile matrix material which is compatible with and adheres to the rotor material. This woven fiber is able to elongate in the circumferential direction to match the rotor growth during spinning. 2 figs.

  20. ISSUANCE 2015-04-29: Energy Conservation Program for Consumer Products: Test Procedures for Direct Heating Equipment and Pool Heaters Notice of petition to extend test procedure compliance date and request for comment

    Broader source: Energy.gov [DOE]

    Energy Conservation Program for Consumer Products: Test Procedures for Direct Heating Equipment and Pool Heaters; Notice of petition to extend test procedure compliance date and request for comment.

  1. Attached-sunspace designs: a nationwide economic appraisal

    SciTech Connect (OSTI)

    Roach, F.; Kirschner, C.

    1980-01-01

    Performance estimates for attached-sunspace passive solar heated residences have recently been incorporated into the Los Alamos/UNM EASE III model. These estimates are used to analyze the economic performance of a fixed dimension sunspace design when attached to a pre-existing single family residential unit. The sunspace is a passive design which can be easily and effectively adapted to a retrofit situation. Several key parameters are carefully evaluated for the sunspace retrofit design. These include loan or mortgage terms, ownership period, resale potential and competing conventional fuel prices. General economic and design parameters are combined in a variant of life cycle costing to evaluate the feasibility of both owner-built and contractor-built attached sunspaces for 220 regions in the contiguous United States. This evaluation is made for two conventional fuel types - natural gas and electric resistance - and for three resale values - 0%, 100%, and 200%. Results show that the prospect for conventional fuel displacement through retrofit of attached sunspaces is very good with the design's economic performance enhanced in regions with expensive conventional fuel alternatives.

  2. ATTACHMENT E NOTIFICATION UNDER FERPA OF STUDENT RIGHTS

    E-Print Network [OSTI]

    Johnson Jr.,, Ray

    ATTACHMENT E NOTIFICATION UNDER FERPA OF STUDENT RIGHTS CONCERNING EDUCATION RECORDS AND DIRECTORY to their education records. See Section "6" below on your right to prevent the disclosure of directory information;2 contracted as its agent to provide a service instead of using University employees or officials, a person

  3. An Empirical Comparison of "Wiimote" Gun Attachments for Pointing Tasks

    E-Print Network [OSTI]

    MacKenzie, Scott

    An Empirical Comparison of "Wiimote" Gun Attachments for Pointing Tasks Victoria McArthur, Steven J, a plastic gun-shaped shell designed for shooter games, the Wii Wheel, designed for driving games is to investigate whether gun- shaped peripherals help or hinder pointing performance with the Wiimote

  4. Thesauruses for Prepositional Phrase Attachment Mark McLauchlan

    E-Print Network [OSTI]

    Thesauruses for Prepositional Phrase Attachment Mark McLauchlan Department of Informatics is estimated with informa- tion from similar examples generated using a thesaurus. Three thesauruses are compared on this task: two existing generic thesauruses and a new specialist PP thesaurus tailored

  5. Payment Request Description Supplier (Yes/No) Attachments Needed

    E-Print Network [OSTI]

    Griggs, Jerrold R.

    Payment Request Description Supplier (Yes/No) Attachments Needed (All in ONE document) Yes 1- Cash Advance Form Use the Employee/Student Supplier Form Yes 1 - Travel Advance Form Use the Employee/Student Supplier Form Yes 1 - Royalty Agreement/Amount Calculation W-9 or W-8(International) Yes W-9 or W-8

  6. Major sources to waivers - lessons learned and $ saved at two U.S. Navy facilities

    SciTech Connect (OSTI)

    Klitsch, M. [Naval Surface Warfare Center, West Bethesda, MD (United States). Carderock Div.

    1997-12-31

    Naval Surface Warfare Center Carderock Division (NSWCCD) manages 17 US Navy research and development (R and D) facilities across the country. These include two facilities in Maryland -- one in Annapolis and the other in West Bethesda which is better known as Carderock. NO{sub x} is the only air emission which exceeds a threshold limit at both properties. The potential to emit NO{sub x} is 72 tpy for Annapolis and 51 tpy for Carderock. The facilities are in different counties but each county has a trigger limit for NO{sub x} of 25 tpy making both facilities major sources. In preparation for the Title V permit applications to the state of Maryland, Carderock budgeted $150,000 in fiscal year 1996 to have a contractor conduct air emission inventories and prepare the Title V permits for both Carderock and Annapolis. However, the Carderock Air Program Manager did not pursue a contractor to perform the work but personally conducted the air emission inventory for both Annapolis and Carderock. Noticing a large difference between the potential-to-emit and the actual emissions of NO{sub x}, the Air Program Manager began negotiations with the Maryland Department of the Environment (MDE) to waive the requirement for the Title V permit application. MDE responded in December 1996 that if the facility`s actual emissions would not exceed 50% of any of the threshold limits during any 12 month period, then a letter of understanding stating such should be submitted to MDE. This letter of understanding would be recognized by the US EPA and MDE and would act as a waiver to the Title V permit applicability up to July 31, 1998. Carderock and Annapolis meet this requirement and letters of understanding were drafted and sent to MDE in January 1997.

  7. Discrete dragline attachment induces aggregation in spiderlings of a solitary species

    E-Print Network [OSTI]

    Theraulaz, Guy

    Discrete dragline attachment induces aggregation in spiderlings of a solitary species RAPHAEL and the experimental data shows that the discrete pattern of silk dragline attachment is the key mechanism involved

  8. Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business...

    Office of Environmental Management (EM)

    43 DOE F 4220.2 Small Business Review Form Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business Review Form Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business...

  9. MILLING-GRINDING-DRILLING AND SLOTTING ATTACHMENT (VERSA-M IL)

    E-Print Network [OSTI]

    Gellman, Andrew J.

    TC 9-524 Chapter 9 MILLING-GRINDING-DRILLING AND SLOTTING ATTACHMENT (VERSA-M IL) GENERAL DESCRIPTION The milling-grinding-drilling and slotting attachment is commonly referred to as a Versa-purpose machines. With the different attachments that are available with the unit, drilling, shaping, milling

  10. Shunt attachment and method for interfacing current collection systems

    DOE Patents [OSTI]

    Denney, Paul E. (State College, PA); Iyer, Natraj C. (Columbia, SC); Hannan, III, William F. (Monroeville Boro, PA)

    1992-01-01

    A composite brush to shunt attachment wherein a volatile component of a composite but mostly metallic brush, used for current collection purposes, does not upon welding or brazing, adversely affect the formation of the interfacial bond with a conductive shunt which carries the current from the zone of the brush. The brush to shunt attachment for a brush material of copper-graphite composite and a shunt of copper, or substituting silver for copper as an alternative, is made through a hot isostatic pressing (HIP). The HIP process includes applying high pressure and temperature simultaneously at the brush to shunt interface, after it has been isolated or canned in a metal casing in which the air adjacent to the interface has been evacuated and the interfacial area has been sealed before the application of pressure and temperature.

  11. Pin and roller attachment system for ceramic blades

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-07-25

    In a turbine, a plurality of blades are attached to a turbine wheel by way of a plurality of joints which form a rolling contact between the blades and the turbine wheel. Each joint includes a pin and a pair of rollers to provide rolling contact between the pin and an adjacent pair of blades. Because of this rolling contact, high stress scuffing between the blades and the turbine wheel reduced, thereby inhibiting catastrophic failure of the blade joints. 3 figs.

  12. Pin and roller attachment system for ceramic blades

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    In a turbine, a plurality of blades are attached to a turbine wheel by way of a plurality of joints which form a rolling contact between the blades and the turbine wheel. Each joint includes a pin and a pair of rollers to provide rolling contact between the pin and an adjacent pair of blades. Because of this rolling contact, high stress scuffing between the blades and the turbine wheel reduced, thereby inhibiting catastrophic failure of the blade joints.

  13. Attachment 4 DOCUMENT NUMBER ICCAT SWORDFISH RE-EXPORT CERTIFICATE

    E-Print Network [OSTI]

    Attachment 4 DOCUMENT NUMBER ICCAT SWORDFISH RE-EXPORT CERTIFICATE RE-EXPORT SECTION: 1. RE-EXPORTING COUNTRY/ENTITY/FISHING ENTITY 2. POINT OF RE-EXPORT 3. DESCRIPTION OF IMPORTED FISH Product Type(*) F OF FISH FOR RE-EXPORT Product Type(*) F/FR RD/GG/DR/ST/FL/OT Net Weight (Kg) * F=FRESH, FR=Frozen, RD

  14. Delisting petition for 300-M saltstone (treated F006 sludge) from the 300-M liquid effluent treatment facility

    SciTech Connect (OSTI)

    Not Available

    1989-04-04

    This petition seeks exclusion for stabilized and solidified sludge material generated by treatment of wastewater from the 300-M aluminum forming and metal finishing processes. The waste contains both hazardous and radioactive components and is classified as a mixed waste. The objective of this petition is to demonstrate that the stabilized sludge material (saltstone), when properly disposed, will not exceed the health-based standards for the hazardous constituents. This petition contains sampling and analytical data which justify the request for exclusion. The results show that when the data are applied to the EPA Vertical and Horizontal Spread (VHS) Model, health-based standards for all hazardous waste constituents will not be exceeded during worst case operating and environmental conditions. Disposal of the stabilized sludge material in concrete vaults will meet the requirements pertaining to Waste Management Activities for Groundwater Protection at the Savannah River Site in Aiken, S.C. Documents set forth performance objectives and disposal options for low-level radioactive waste disposal. Concrete vaults specified for disposal of 300-M saltstone (treated F006 sludge) assure that these performance objectives will be met.

  15. Traffic of cytoskeletal motors with disordered attachment rates

    E-Print Network [OSTI]

    H. Grzeschik; R. J. Harris; L. Santen

    2010-02-19

    Motivated by experimental results on the interplay between molecular motors and tau proteins, we extend lattice-based models of intracellular transport to include a second species of particle which locally influences the motor-filament attachment rate. We consider various exactly solvable limits of a stochastic multi-particle model before focusing on the low-motor-density regime. Here, an approximate treatment based on the random walk behaviour of single motors gives good quantitative agreement with simulation results for the tau-dependence of the motor current. Finally, we discuss the possible physiological implications of our results.

  16. Bonneville Power Administration Attachment P Oversupply Management Protocol

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O OLaura|BilayerBiomimetic DyeBlue Gene/QENT2.0.0 Attachment P

  17. Property:NEPA ApplicationAttachments | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to: navigation,PropertyPartner7WebsiteCertReqsApplicationAttachments Jump to:

  18. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal ofNational Nuclear SecuritySecurityriver siteL, Attachment E,

  19. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal ofNational Nuclear SecuritySecurityriver siteL, Attachment E,E,

  20. Section L Attachment G - Management Team Cost Sheet.xlsx

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal ofNational Nuclear SecuritySecurityriver siteL, Attachment E,E,G

  1. Attachment F - Bibliography and References | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p u tCorporationIt'sDOE Phasedare listed in Attachment F -

  2. Attachment FY2011-9 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p u tCorporationIt'sDOE Phasedare listed in Attachment F -FFRDC

  3. Attachment H: Delegation of Authority Memorandum | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p u tCorporationIt'sDOE Phasedare listed in Attachment F -FFRDC

  4. AttachmentFlash_2010-55.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p u tCorporationIt'sDOE Phasedare listed in Attachment

  5. Civil Engineering Department ADVISING CONTRACT

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    Civil Engineering Department ADVISING CONTRACT When you seek pre-registration or registration and will be reported to the Assistant Dean. A student may petition the Civil Engineering Department Head for a waiver

  6. Secure attachment, self-esteem, and optimism as predictors of positive body mage in women 

    E-Print Network [OSTI]

    Sandoval, Erin Leverenz

    2009-05-15

    ; Pistole, 1993). Attachment style affects how people interpret interpersonal stimuli, ?the nature of the emotional experiences triggered, and the memories that are retrieved? (Fonagy, 1998, p. 148). These primary patterns of attachment, developed... in childhood, are postulated to translate into attachment styles, secure or insecure, occurring in adult relationships (Hazan & Shaver, 1987). M. Carole Pistole explains that ?it?s the central caregiving relationship (which is usually with the mother...

  7. Nevada Test Site Environmental Report 2008 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy A. Wills

    2009-09-01

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2008 (National Security Technologies, LLC [NSTec], 2009a). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  8. Nevada Test Site Environmental Report 2009, Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills, ed.

    2010-09-13

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2009. Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  9. Cladding Attachment Over Thick Exterior Insulating Sheathing (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-11-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of wood-framed walls and mass masonry wall assemblies. The location of the insulation on the exterior of the structure has many direct benefits, including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased airtightness and improved water management. For thick layers of exterior insulation (more than 1.5 in.), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location. Although the approach has proven effective, there is significant resistance to its widespread implementation due to a lack of research and understanding of the mechanisms involved in the development of the vertical displacement resistance capacity. In addition, the long-term in-service performance of the system has been questioned due to potential creep effects of the assembly under the sustained dead load of the cladding and effects of varying environmental conditions. In addition, the current International Building Code (IBC) and International Residential Code (IRC) do not have a provision that specifically allows this assembly.

  10. Attachment A: Modeling in Support of Additional Two-Unit Operating...

    Broader source: Energy.gov (indexed) [DOE]

    Plan of Mirant Potomac River, LLC Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations More Documents & Publications Mirant Potomac, Alexandria,...

  11. Attachment A: AIP Program Principles (Questions and Answers 1-12)

    Broader source: Energy.gov [DOE]

    This attachment contains twelve questions and answers that designate the mandatory AIP provisions that shall be included in new and renegotiated agreements and discusses the principles underlying...

  12. Social Perception, Emotional Intelligence and Attachment Style: Does A Correlation Exist? 

    E-Print Network [OSTI]

    Kamran, Emma Z

    2008-06-27

    Abstract This study investigated whether correlations existed between social perception (SP), emotional intelligence (EI) and attachment styles (AS). The sample consisted of 92 Caucasian participants recruited from the ...

  13. Attached is Policy Flash 2013-34 Department of Energy Acquisition...

    Office of Environmental Management (EM)

    Department of Energy Acquisition Letter 2013-04 on Executive Compensation Attached is Policy Flash 2013-34 Department of Energy Acquisition Letter 2013-04 on Executive...

  14. Attachment 5 Volume II Pricing Matrix.xls | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Attachment 5 Volume II Pricing Matrix.xls&0; More Documents & Publications Microsoft Word - FY07AnnualReport.doc CX-005455: Categorical Exclusion Determination Microsoft Word -...

  15. Attachment and detachment of microorganisms as related to sampling carcasses and meat products 

    E-Print Network [OSTI]

    Butler, Jacqueline Love

    1980-01-01

    of Advisory Committee: Dr. C. Vanderzant A model system was developed to study attachment and de- t-chment of' bacteria with pork skin and muscle surfaces of beef and lamb carcasses. The technique involved embedding pork skin and beef and lamb muscle... medium, although in some cases attachment continued to occur over a $0-min period. Gram-negative motile bacteria had greater force of attachment than gram-positive non-motile species. Temperature and pH of the attachment medium had little eff...

  16. Improving User Decisions about Opening Potentially Dangerous Attachments in Email Clients

    E-Print Network [OSTI]

    Brustoloni, José Carlos

    Improving User Decisions about Opening Potentially Dangerous Attachments in Email Clients Ricardo Pittsburgh, PA 15213 adbrooks@andrew.cmu.edu ABSTRACT To prevent users from opening potentially dangerous), whereby the email client detects that the user is about to open a potentially dangerous attachment

  17. Three-dimensional terminally attached self-avoiding walks and bridges

    E-Print Network [OSTI]

    Nathan Clisby; Andrew R. Conway; Anthony J. Guttmann

    2015-07-24

    We study terminally attached self-avoiding walks and bridges on the simple cubic lattice, both by series analysis and Monte Carlo methods. We provide strong numerical evidence supporting a scaling relation between self-avoiding walks, bridges, and terminally attached self-avoiding walks, and posit that a corresponding amplitude ratio is a universal quantity.

  18. Mlp2p, A Component of Nuclear Pore Attached Intranuclear Filaments, Associates with Nic96p*

    E-Print Network [OSTI]

    Panté, Nelly

    Mlp2p, A Component of Nuclear Pore Attached Intranuclear Filaments, Associates with Nic96p is localized at the terminal ring of the nuclear basket. When Nic96p was affinity purified from glutaraldehyde- logues, which form the nuclear pore-attached intranu- clear filaments (Strambio-de-Castillia, C., Blobel

  19. PETITION FOR ASSIGNMENT OF PATENT RIGHTS TO INVENTOR The undersigned Inventor(s), an employee(s) of The Pennsylvania State University, seeks to have

    E-Print Network [OSTI]

    Lee, Dongwon

    PETITION FOR ASSIGNMENT OF PATENT RIGHTS TO INVENTOR The undersigned Inventor(s), an employee. RA-12. Inventor warrants and represents the following to be true: 1. Compliance with My Obligations to the invention, and to rescind any assignment. 2. Agreement Among Joint Inventors. PSRF will only assign an equal

  20. Attaching solar collectors to a structural framework utilizing a flexible clip

    DOE Patents [OSTI]

    Kruse, John S

    2014-03-25

    Methods and apparatuses described herein provide for the attachment of solar collectors to a structural framework in a solar array assembly. A flexible clip is attached to either end of each solar collector and utilized to attach the solar collector to the structural framework. The solar collectors are positioned to allow a member of the framework to engage a pair of flexible clips attached to adjacent solar collectors during assembly of the solar array. Each flexible clip may have multiple frame-engaging portions, each with a flange on one end to cause the flexible clip to deflect inward when engaged by the framework member during assembly and to guide each of the frame-engaging portions into contact with a surface of the framework member for attachment.

  1. Remedial action plan and site design for stabilization of the inactive uranium processing site at Naturita, Colorado. Appendix B of Attachment 3: Groundwater hydrology report, Attachment 4: Water resources protection strategy, Final

    SciTech Connect (OSTI)

    Not Available

    1994-03-01

    Attachment 3 Groundwater Hydrology Report describes the hydrogeology, water quality, and water resources at the processing site and Dry Flats disposal site. The Hydrological Services calculations contained in Appendix A of Attachment 3, are presented in a separate report. Attachment 4 Water Resources Protection Strategy describes how the remedial action will be in compliance with the proposed EPA groundwater standards.

  2. Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments

    Broader source: Energy.gov [DOE]

    Presentation from Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments.

  3. Policy Flash 2012-34 | Department of Energy

    Energy Savers [EERE]

    4 Policy Flash 2012-34 Attached is Policy Flash 34-Waiver of Mandatory Use of the Strategic Integrated Procurement Enterprise System (STRIPES) for GSA Global Supply Service...

  4. Nevada Test Site Environmental Report 2007 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills

    2008-09-01

    This appendix expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2007 (U.S. Department of Energy [DOE], 2008). Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  5. Expert Meeting Report: Cladding Attachment Over Exterior Insulation (BSC Report)

    SciTech Connect (OSTI)

    2013-10-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. The location of the insulation to the exterior of the structure has many direct benefits including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased air tightness and improved water management (Hutcheon 1964, Lstiburek 2007). The intent of the meeting was to review the current state of industry knowledge regarding cladding attachment over exterior insulation with a specific focus on: 1. Gravity load resistance, 2. Wind load resistance. The presentations explore these topics from an engineering design, laboratory testing, field monitoring, as well as practical construction perspective. By bringing various groups together (who have been conduction research or have experience in this area), a more holistic review of the design limits and current code language proposals can be completed and additional gaps identified. The results of which will help inform design standards and criteria.

  6. Attachment method for stacked integrated circuit (IC) chips

    DOE Patents [OSTI]

    Bernhardt, A.F.; Malba, V.

    1999-08-03

    An attachment method for stacked integrated circuit (IC) chips is disclosed. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM. 12 figs.

  7. Attachment method for stacked integrated circuit (IC) chips

    DOE Patents [OSTI]

    Bernhardt, Anthony F. (Berkeley, CA); Malba, Vincent (Livermore, CA)

    1999-01-01

    An attachment method for stacked integrated circuit (IC) chips. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM.

  8. Preferential Attachment in an Internet-mediated Human Network

    E-Print Network [OSTI]

    Arevalo, Chezka Camille P

    2015-01-01

    In the advent of the Internet, web-mediated social networking has become of great influence to Filipinos. Networking sites such as Friendster, YouTube, FaceBook and MySpace are among the most well known sites on the Internet. These sites provide a wide range of services to users from different parts of the world, such as connecting and finding people, as well as, sharing and organizing contents. The popularity and accessibility of these sites enable information to be available. These allow people to analyze and study the characteristics of the population of online social networks. In this study, we developed a computer program to analyze the structural dynamics of a locally popular social networking site: The Friendster Network. Understanding the structural dynamics of a virtual community has many implications, such as finding an improvement on the current networking system, among others. Based on our analysis, we found out that users of the site exhibit preferential attachment to users with high number of fr...

  9. Methods for attaching polymerizable ceragenins to water treatment membranes using amine and amide linkages

    DOE Patents [OSTI]

    Hibbs, Michael; Altman, Susan J.; Jones, Howland D.T.; Savage, Paul B.

    2013-10-15

    This invention relates to methods for chemically grafting and attaching ceragenin molecules to polymer substrates; methods for synthesizing ceragenin-containing copolymers; methods for making ceragenin-modified water treatment membranes and spacers; and methods of treating contaminated water using ceragenin-modified treatment membranes and spacers. Ceragenins are synthetically produced antimicrobial peptide mimics that display broad-spectrum bactericidal activity. Alkene-functionalized ceragenins (e.g., acrylamide-functionalized ceragenins) can be attached to polyamide reverse osmosis membranes using amine-linking, amide-linking, UV-grafting, or silane-coating methods. In addition, silane-functionalized ceragenins can be directly attached to polymer surfaces that have free hydroxyls.

  10. Methods for attaching polymerizable ceragenins to water treatment membranes using silane linkages

    DOE Patents [OSTI]

    Hibbs, Michael; Altman, Susan J.; Jones, Howland D. T.; Savage, Paul B.

    2013-09-10

    This invention relates to methods for chemically grafting and attaching ceragenin molecules to polymer substrates; methods for synthesizing ceragenin-containing copolymers; methods for making ceragenin-modified water treatment membranes and spacers; and methods of treating contaminated water using ceragenin-modified treatment membranes and spacers. Ceragenins are synthetically produced antimicrobial peptide mimics that display broad-spectrum bactericidal activity. Alkene-functionalized ceragenins (e.g., acrylamide-functionalized ceragenins) can be attached to polyamide reverse osmosis membranes using amine-linking, amide-linking, UV-grafting, or silane-coating methods. In addition, silane-functionalized ceragenins can be directly attached to polymer surfaces that have free hydroxyls.

  11. http://www.research.utoronto.ca OFFICE OF THE VICE PRESIDENT, RESEARCH: RIS Application Attachment

    E-Print Network [OSTI]

    Sokolowski, Marla

    , Culture & Entertainment Clean Technologies Nanotechnology Digital Media Natural Resources Energy) Interdisciplinary For additional names, please attach a separate sheet CLASSIFICATION LOCATION(S) OFRESEARCH CO ONLY - PROJECT CLASSIFICATION CODES Area of Application / Disease Codes Please select up to 2 codes

  12. The Effects of Volunteering on the Development of Place Attachment and Stewardship of Natural Places 

    E-Print Network [OSTI]

    Eccles, Kate

    2010-01-16

    The purpose of this study was to explore how volunteers engaged in natural-area based projects develop attachments to the resource and act as stewards for these resources. The context of this study was the National Park ...

  13. Hydrogen Fuel Infrastructure PON-11-609 Attachment F Local Health Impacts Information

    E-Print Network [OSTI]

    Hydrogen Fuel Infrastructure PON-11-609 Attachment F ­ Local Health Impacts Information Air Quality Percentage of population under 5 years and over 65 years of age #12;Hydrogen Fuel Infrastructure PON-11

  14. An evaluation of the storage systems based on network-attached disks 

    E-Print Network [OSTI]

    Ma, Gang

    1998-01-01

    The emergence of network-attached disks provides the phics. possibility of transferring data between the storage system and the client directly. This offers new possibilities in building a distributed storage system. In this thesis, we examine...

  15. Adult attachment and self-construal: a cross-cultural analysis 

    E-Print Network [OSTI]

    Friedman, Michael David

    2009-06-02

    A cross-cultural survey study examined the impact of adult attachment and self-construal on relationship and mental health outcomes in Hong Kong, Mexico, and the United States. Approximately 200 university students (each ...

  16. Technical Review Report for the Mound 1KW Package Safety Analysis Report for Packaging Waiver for the Use of Modified Primary Containment Vessel (PCV)

    SciTech Connect (OSTI)

    West, M; Hafner, R

    2008-05-05

    This Technical Review Report (TRR) documents the review, performed by the Lawrence Livermore National Laboratory (LLNL) staff, at the request of the U.S. Department of Energy (DOE), on the Waiver for the Use of Modified Primary Containment Vessels (PCV). The waiver is to be used to support a limited number of shipments of fuel for the Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) Project in support of the National Aeronautics and Space Administration's (NASA's) Mars Science Laboratory (MSL) mission. Under the waiver, an inventory of existing national security PCVs will be converted to standard PCVs. Both types of PCVs are currently approved for use by the Office of Nuclear Energy. LLNL has previously reviewed the national security PCVs under Mound 1KW Package Safety Analysis Report for Packaging, Addendum No. 1, Revision c, dated June 2007 (Addendum 1). The safety analysis of the package is documented in the Safety Analysis Report for Packaging (SARP) for the Mound 1KW Package (i.e., the Mound 1KW SARP, or the SARP) where the standard PCVs have been reviewed by LLNL. The Mound 1KW Package is certified by DOE Certificate of Compliance (CoC) number USA/9516/B(U)F-85 for the transportation of Type B quantities of plutonium heat source material. The waiver requests an exemption, claiming safety equivalent to the requirements specified in 10 CFR 71.12, Specific Exemptions, and will lead to a letter amendment to the CoC. Under the waiver, the Office of Radioisotope Power Systems, NE-34, is seeking an exemption from 10 CFR 71.19(d)(1), Previously Approved Package,[5] which states: '(d) NRC will approve modifications to the design and authorized contents of a Type B package, or a fissile material package, previously approved by NRC, provided--(1) The modifications of a Type B package are not significant with respect to the design, operating characteristics, or safe performance of the containment system, when the package is subjected to the tests specified in {section}71.71 and 71.73.' The LLNL staff had previously reviewed a request from Idaho National Laboratory (INL) to reconfigure national security PCVs to standard PCVs. With a nominal 50% reduction in both the height and the volume, the LLNL staff initially deemed the modifications to be significant, which would not be allowed under the provisions of 10 CFR 71.19(d)(1)--see above. As a follow-up, the DOE requested additional clarification from the Nuclear Regulatory Commission (NRC). The NRC concluded that the reconfiguration would be a new fabrication, and that an exemption to the regulations would be required to allow its use, as per the requirements specified in 10 CFR 71.19(c)(1), Previously Approved Package: '(c) A Type B(U) package, a Type B(M) package, or a fissile material package previously approved by the NRC with the designation '-85' in the identification number of the NRC CoC, may be used under the general license of {section}71.17 with the following additional conditions: (1) Fabrication of the package must be satisfactorily completed by December 31, 2006, as demonstrated by application of its model number in accordance with 71.85(c).' Although the preferred approach toward the resolution of this issue would be for the applicant to submit an updated SARP, the applicant has stated that the process of updating the Model Mound 1KW Package SARP is a work that is in progress, but that the updated SARP is not yet ready for submittal. The applicant has to provide a submittal, proving that the package meets the '-96' requirements of International Atomic Energy Agency (IAEA) Safety Standards Series No. TS-R-1, in order to fabricate approved packagings after December 31, 2006. The applicant has further stated that all other packaging features, as described in the currently approved Model Mound 1KW Package SARP, remain unchanged. This report documents the LLNL review of the waiver request. The specific review for each SARP Chapter is documented.

  17. On the Effect of Ramp Rate in Damage Accumulation of the CPV Die-Attach: Preprint

    SciTech Connect (OSTI)

    Bosco, N. S.; Silverman, T. J.; Kurtz, S. R.

    2012-06-01

    It is commonly understood that thermal cycling at high temperature ramp rates may activate unrepresentative failure mechanisms. Increasing the temperature ramp rate of thermal cycling, however, could dramatically reduce the test time required to achieve an equivalent amount of thermal fatigue damage, thereby reducing overall test time. Therefore, the effect of temperature ramp rate on physical damage in the CPV die-attach is investigated. Finite Element Model (FEM) simulations of thermal fatigue and thermal cycling experiments are made to determine if the amount of damage calculated results in a corresponding amount of physical damage measured to the die-attach for a variety of fast temperature ramp rates. Preliminary experimental results are in good agreement with simulations and reinforce the potential of increasing temperature ramp rates. Characterization of the microstructure and resulting fatigue crack in the die-attach suggest a similar failure mechanism across all ramp rates tested.

  18. Simulation and Experiment of Thermal Fatigue in the CPV Die Attach: Preprint

    SciTech Connect (OSTI)

    Bosco, N.; Silverman, T.; Kurtz, S.

    2012-05-01

    FEM simulation and accelerated thermal cycling have been performed for the CPV die attach. Trends in fatigue damage accumulation and equivalent test time are explored and found to be most sensitive to temperature ramp rate. Die attach crack growth is measured through cycling and found to be in excellent agreement with simulations of the inelastic strain energy accumulated. Simulations of an entire year of weather data provides for the relative ranking of fatigue damage between four cites as well as their equivalent accelerated test time.

  19. Attachment B: Jamaica Bay Watershed Protection Plan Update 1. WATER QUALITY

    E-Print Network [OSTI]

    Columbia University

    Bay. Ongoing NYCDEP continues to limit shipments. NA NA DEP See attached status report. Upgrade will accommodate daily transshipments instead of a few times a week to ensure all Jamaica sludge is treated via excess algae and sea lettuce to reduce nitrogen and produce biodiesel fuels. Design anticipated to begin

  20. Finite Element Method for Epitaxial Growth with Attachment-Detachment Kinetics

    E-Print Network [OSTI]

    Li, Bo

    growth of thin films. Epitaxial growth is a technology for growing single crystal thin filmsFinite Element Method for Epitaxial Growth with Attachment-Detachment Kinetics Eberhard B in epitaxial growth. Such problems consist of an adatom (adsorbed atom) diffusion equation on terraces

  1. The Ndc80 Kinetochore Complex Forms Load-Bearing Attachments to Dynamic

    E-Print Network [OSTI]

    Asbury, Chip

    al., 1995). However, kinetochore-bound motors are largely dispensable in yeast (Grishchuk and Mc on ATP-powered motor enzymes. Motors likely contribute to coupling in many organisms (Sharp et al., 2000; Yang et al., 2007), and some motors can mediate attachment to disassembling tips in vitro (Lombillo et

  2. A Competition-Ba sed Explanation of Syntactic Attachment Preferences and Garden Path Phenomena

    E-Print Network [OSTI]

    A Competition-Ba sed Explanation of Syntactic Attachment Preferences and Garden Path Phenomena suzanne@cs.toronto.edu Abstract This paper presents a massively parallel parser that pre- dicts critical or revision strategies. The processing of a syntactic am- biguity is modeled as an active, distributed

  3. ORIGINAL Open Access Immobilization of anode-attached microbes in a

    E-Print Network [OSTI]

    ORIGINAL Open Access Immobilization of anode-attached microbes in a microbial fuel cell Rachel C isolation of new microbes a challenge. More in vivo like conditions are needed where bacteria can be grown) are based on electron transfer between microbes and an electrode surface. Most investigations

  4. Fluorescence Microscopy Evidence for Quasi-Permanent Attachment of Antifreeze Proteins to Ice Surfaces

    E-Print Network [OSTI]

    Wettlaufer, John S.

    Fluorescence Microscopy Evidence for Quasi-Permanent Attachment of Antifreeze Proteins to Ice ABSTRACT Many organisms are protected from freezing by the presence of extracellular antifreeze proteins (AFPs), which bind to ice, modify its morphology, and prevent its further growth. These proteins have

  5. Dissociative electron attachment to carbon dioxide via the ^2\\Pi_u shape resonance

    E-Print Network [OSTI]

    Moradmand, A; Haxton, D J; Rescigno, T N; McCurdy, C W; Weber, Th; Matsika, Spiridoula; Landers, A L; Belkacem, A; Fogle, M

    2013-01-01

    Momentum imaging measurements from two experiments are presented and interpreted with the aid of new ab initio theoretical calculations to describe the dissociative electron attachment (DEA) dynamics. We address the problem of how the 4 eV ^2\\Pi_u shape resonance in CO_2 proceeds to dissociate to CO(^1\\Sigma^+) + O^-(^2P) by DEA.

  6. DOE O 221.1A Attachment 1 4-19-08 Page 1

    E-Print Network [OSTI]

    Lee, Jason R.

    DOE O 221.1A Attachment 1 4-19-08 Page 1 CONTRACTOR REQUIREMENTS DOCUMENT DOE O 221.1A, REPORTING. GENERAL REQUIREMENTS. Department of Energy (DOE) contractors, including National Nuclear Security, or mismanagement relating to DOE programs, operations, facilities, contracts, or information technology systems

  7. Degree project Single-cell analysis of attached microbes in sediment, soil, and biofilms

    E-Print Network [OSTI]

    Uppsala Universitet

    Degree project Single-cell analysis of attached microbes in sediment, soil, and biofilms Keywords with a phylogenetic screen and sequencing to gain further information about the microbes possibly involved with another group, if the student has a particular interest in other metabolic functions or microbes

  8. Dissociative Electron Attachment to Carbon Dioxide via the 8.2 eV Feshbach resonance

    SciTech Connect (OSTI)

    Slaughter, Dan; Adaniya, Hidihito; Rescigno, Tom; Haxton, Dan; Orel, Ann; McCurdy, Bill; Belkacem, Ali

    2011-08-17

    Momentum imaging experiments on dissociative electron attachment (DEA) to CO{sub 2} are combined with the results of ab initio calculations to provide a detailed and consistent picture of the dissociation dynamics through the 8.2 eV resonance, which is the major channel for DEA in CO{sub 2}. The present study resolves several puzzling misconceptions about this system.

  9. Page 1 of 9 Attachment A PP/OP 05.09

    E-Print Network [OSTI]

    Gelfond, Michael

    Sufficient to satisfy applicable Northern Natural Gas Co or Oneok Gas Transportation LLC FERC gas tariff Natural Gas Company or Oneok Gas Transportation LLC pipelines. SUPPLY AND DELIVERY All natural gas supplyPage 1 of 9 Attachment A PP/OP 05.09 1/29/2010 REQUEST FOR NATURAL GAS SUPPLY PROPOSAL Texas Tech

  10. Attachment A Colorado Drug Laws Substance Type of Offense Legal Sanction

    E-Print Network [OSTI]

    Attachment A ­ Colorado Drug Laws Substance Type of Offense Legal Sanction Page 1 of 4 Updated-.05 for DUI Court imposed sanctions: · Class A traffic infraction- 4 points plus the original violation · Up to 24 hrs. on Community service · Alcohol evaluation and treatment DOR/DMV sanctions: · Loss of license

  11. Designing for Emotional Attachment to Energy Approaching energy as materiality Design exploration: Energy Mementos

    E-Print Network [OSTI]

    Paulos, Eric

    Designing for Emotional Attachment to Energy Approaching energy as materiality Design exploration: Energy Mementos We have been developing a perspective on energy-as-materiality and employing a designerly approach of materializing energy exploration in order to understand what energy is and how we are and could

  12. EXHIBIT G7.0 Attachment 2 3/2014 Page 1

    E-Print Network [OSTI]

    EXHIBIT G7.0 Attachment 2 3/2014 Page 1 SUBCONTRACTOR CYBER SECURITY PLAN Vendor Name (if Exhibit G, Section 7.5.1, the following sets forth Subcontractor's specific cyber security 1663, MS B289 Los Alamos, NM 87545 505-667-1982 Subcontractor's Cyber Security Site Manager (or similar

  13. Strategies for Detecting Network Attachment in the All-IPv6 Wireless and Mobile Internet

    E-Print Network [OSTI]

    Sekercioglu, Y. Ahmet

    . . . . . . . . . . . . . 12 1.3.2 Router Discovery in wireless and mobile environments . . . . 13 1.3.3 Detecting NetworkStrategies for Detecting Network Attachment in the All-IPv6 Wireless and Mobile Internet Gregory;#12;Contents 1 Introduction 1 1.1 Ubiquitous wireless Internet . . . . . . . . . . . . . . . . . . . . . . . 2

  14. ATTACHMENT TO FORM 8233 (For use by students of Egypt who are claiming Tax Treaty exemption).

    E-Print Network [OSTI]

    Awtar, Shorya

    ATTACHMENT TO FORM 8233 (For use by students of Egypt who are claiming Tax Treaty exemption). 1. I was a resident of Egypt on the date of my arrival in the United States. I am not a United States citizen. I have the United States and Egypt in an amount not in excess of $3000 for any taxable year. I have not previously

  15. Protective interior wall and attaching means for a fusion reactor vacuum vessel

    DOE Patents [OSTI]

    Phelps, R.D.; Upham, G.A.; Anderson, P.M.

    1985-03-01

    The wall basically consists of an array of small rectangular plates attached to the existing walls with threaded fasteners. The protective wall effectively conceals and protects all mounting hardware beneath the plate array, while providing a substantial surface area that will absorb plasma energy.

  16. Ceramic to metal attachment system. [Ceramic electrode to metal conductor in MHD generator

    DOE Patents [OSTI]

    Marchant, D.D.

    1983-06-10

    A composition and method are described for attaching a ceramic electrode to a metal conductor. A layer of randomly interlocked metal fibers saturated with polyimide resin is sandwiched between the ceramic electrode and the metal conductor. The polyimide resin is then polymerized providing bonding.

  17. 2014-09-23 Issuance: Energy Conservation Standard for Walk-in Coolers and Freezers; Air-Conditioning, Heating, & Refrigeration Institute Petition for Reconsideration Notice of Public Meeting

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register notice of public meeting regarding energy conservation standards for walk-in coolers and freezers; Air-Conditioning, Heating, & Refrigeration Institute petition for reconsideration, as issued by the Deputy Assistant Secretary for Energy Efficiency on September 23, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  18. Structures for attaching or sealing a space between components having different coefficients or rates of thermal expansion

    DOE Patents [OSTI]

    Corman, Gregory Scot; Dean, Anthony John; Tognarelli, Leonardo; Pecchioli, Mario

    2005-06-28

    A structure for attaching together or sealing a space between a first component and a second component that have different rates or amounts of dimensional change upon being exposed to temperatures other than ambient temperature. The structure comprises a first attachment structure associated with the first component that slidably engages a second attachment structure associated with the second component, thereby allowing for an independent floating movement of the second component relative to the first component. The structure can comprise split rings, laminar rings, or multiple split rings.

  19. Personal Services Agreements Waivers

    E-Print Network [OSTI]

    capital construction and controlled maintenance contracts. Type of Service 1. Construction Consultants limitations. 3. Building and Ground Services: Include floor finishing, roofing maintenance, welding operations. CSM does not have staff qualified to perform these specialized services, or does not have

  20. Eligibility Enrollment/Waiver

    E-Print Network [OSTI]

    CONTACT SECTION Service Student Health Program Phone Web Site Primary Care Student Health Center After

  1. Personal Services Agreements Waivers

    E-Print Network [OSTI]

    or technical nature. Section 24-50-504(2)(e) ­ The contract is needed to protect against a conflict of interest mapping, reviewing, surveying, and data collection for which CSM does not have staff qualified to perform

  2. Personal Services Agreements Waivers

    E-Print Network [OSTI]

    ­ that do not require design work: Advertising services are required for such things as faculty positions wide list of high school students that meet possible criteria for attending CSM. The School does not have adequate staff to perform these services. 9. Safety Inspection: The School does not have

  3. Observation of the dynamics leading to a conical intersection in dissociative electron attachment to water

    SciTech Connect (OSTI)

    Haxton, Dan; Adaniya, Hidihito; Slaughter, Dan; Rudek, B.; Osipov, Timur; Weber, Thorsten; Rescigno, Tom; McCurdy, Bill; Belkacem, Ali

    2011-06-08

    Following prior work on the lower-energy resonances, we apply techniques of momentum imaging and ab initio scattering calculations to the process of dissociative electron attachment to water via the highest-energy {sup 2}B{sub 2} resonance. We focus on the H{sup -} anion fragment, which is produced via dynamics passing through and avoiding the conical intersection with the lower A{sub 1} state, leading to OH ((sup 2}{Pi}#5;) and OH ({sup 2}{Sigma}#6;), respectively. The momentum imaging technique, when combined with theoretical calculations on the attachment amplitude and dissociation dynamics, demonstrates that the angular distributions provide a signature of the location of the conical intersection in the space of nuclear con#12;gurations.

  4. Clip gage attachment for frictionless measurement of displacement during high-temperature mechanical testing

    DOE Patents [OSTI]

    Alexander, D.J.

    1994-01-04

    An attachment for placement between a test specimen and a remote clip gage extensometer providing improved fracture toughness tests of materials at elevated temperature is described. Using a cylindrical tube and axial rod in new relationship, the device transfers the displacement signal of the fracture toughness test specimen directly to a clip gage extensometer located outside the high temperature furnace. Virtually frictionless operation is assured by having the test specimen center one end of the rod in one end of the tube, while the clip gage extensometer arms center the other end of the rod in the other end of the tube. By providing positive control over both ends of both rod and tube, the attachment may be operated in orientations other than vertical. 1 figure.

  5. Clip gage attachment for frictionless measurement of displacement during high-temperature mechanical testing

    DOE Patents [OSTI]

    Alexander, David J. (Oak Ridge, TN)

    1994-01-01

    An attachment for placement between a test specimen and a remote clip gage extensometer providing improved fracture toughness tests of materials at elevated temperature. Using a cylindrical tube and axial rod in new relationship, the device transfers the displacement signal of the fracture toughness test specimen directly to a clip gage extensometer located outside the high temperature furnace. Virtually frictionless operation is assured by having the test specimen center one end of the rod in one end of the tube, while the clip gage extensometer arms center the other end of the rod in the other end of the tube. By providing positive control over both ends of both rod and tube, the attachment may be operated in orientations other than vertical.

  6. The relationship of adult attachment style and interactive conflict styles to marital satisfaction 

    E-Print Network [OSTI]

    Crowley, Anne Katherine

    2009-06-02

    -withdraw (Feeney, et al., 1994; Pistole, 1994). Additionally, while studies have investigated these interactive patterns of accommodation (e.g. Rusbult, Verette, Whitney, Slovick & Lipkus, 1991; Rusbult, 1993; Kumashiro, Finkel & Rusbult, 2002) and demand... in the maintenance of their romantic relationship (Pistole, 1989; Pietromonaco, et al., 2004). In contrast, insecure individuals tend to experience difficulty in managing conflict and affect regulation, which relates to their attachment history of unreliable...

  7. Exploration of versatile clamping mechanism and brace system for table attachment to lamp posts and poles in urban settings

    E-Print Network [OSTI]

    Macomber, Bryan A

    2012-01-01

    The goal of this thesis is to explore potential designs for a table that attaches to poles and street signs outside food trucks. A convenient placement of tables could greatly facilitate and improve the eating experience ...

  8. Attachment K

    Office of Environmental Management (EM)

    SOLID WASTE MANAGEMENT UNIT (SWMU) AND AREA OF CONCERN (AOC) TABLES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation...

  9. Attachment O

    Office of Environmental Management (EM)

    O-2 of 14 LIST OF TABLES 1 Table Title 2 O-1 Ventilation Operating Modes and Associated Flow Rates 3 O-2 Mine Ventilation Rate Testing Equipment 4 O-3 Active Disposal Room...

  10. Attachment N

    Office of Environmental Management (EM)

    Sensitivity, and Completeness LIST OF FIGURES Figure Title Figure N-1 Panel Area Flow Figure N-2 VOC Monitoring System Design Figure N-3 Disposal Room VOC Monitoring Figure...

  11. ATTACHMENT N

    Office of Environmental Management (EM)

    Category RWMU Structure BuildingsStructures (not associated with the permitted unit) Sumps* Figure 35 Technical Area (TA)-54, Area G, Building 33 Building 33 Dome N Figure 36:...

  12. Attachment A

    Office of Environmental Management (EM)

    September 16, 2004, describing a change of 2 ownership of Washington TRU Solutions LLC (WTS). WTS is owned 3 jointly by WGES, managing member, and Weston Solutions, Inc. WGES 4...

  13. Attachment N

    Office of Environmental Management (EM)

    SCHEDULE Los Alamos National Laboratory Hazardous Waste Permit June 2012 2 Compliance Schedule This Compliance Schedule briefly lists particular requirements, in chronological...

  14. ATTACHMENT E

    Office of Environmental Management (EM)

    E INSPECTION PLAN Los Alamos National Laboratory Hazardous Waste Permit June 2012 1 TABLE OF CONTENTS LIST OF FIGURES 3 E.1 GENERAL INSPECTION SCHEDULES AND REQUIREMENTS 4 E.1.1...

  15. Attachment E

    Office of Environmental Management (EM)

    E INSPECTION SCHEDULE, PROCESS AND FORMS Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste...

  16. Attachment B

    Office of Environmental Management (EM)

    B HAZARDOUS WASTE PERMIT APPLICATION PART A Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous...

  17. ATTACHMENT F

    Office of Environmental Management (EM)

    TRAINING PLAN Los Alamos National Laboratory Hazardous Waste Permit December 2014 TABLE OF CONTENTS F.1 HAZARDOUS AND MIXED WASTE MANAGEMENTRESPONSIBILITIES ...3 F.2...

  18. Attachment G

    Office of Environmental Management (EM)

    G CLOSURE PLAN Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014...

  19. Attachment A

    Office of Environmental Management (EM)

    TECHNICAL AREA (TA) - UNIT DESCRIPTIONS 1 Los Alamos National Laboratory Hazardous Waste Permit December 2014 TABLE OF CONTENTS A.1 TA-3 4 A.1.1 TA-3 Building 29 4 A.1.2 Security...

  20. Attachment L

    Office of Environmental Management (EM)

    L WIPP GROUNDWATER DETECTION MONITORING PROGRAM PLAN Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant...

  1. Attachment F

    Office of Environmental Management (EM)

    TRAINING Waste Isolation Pilot Plant Hazardous Waste Permit December 21, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit December 21, 2012...

  2. Attachment C

    Office of Environmental Management (EM)

    PLAN Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT...

  3. Attachment D

    Office of Environmental Management (EM)

    RCRA CONTINGENCY PLAN Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October...

  4. ATTACHMENT A

    Office of Environmental Management (EM)

    A4 TRAFFIC PATTERNS Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013...

  5. ATTACHMENT D

    Office of Environmental Management (EM)

    CONTINGENCY PLAN Los Alamos National Laboratory Hazardous Waste Permit December 2014 TABLE OF CONTENTS LIST OF TABLES ......

  6. Attachment J

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    J HAZARDOUS WASTE MANAGEMENT UNITS Los Alamos National Laboratory Hazardous Waste Permit December 2014 TABLE J-1 Active Portion of the Facility Includes units permitted to store...

  7. Window Attachments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roller shade Solar screen Drapes Louvered blinds Roller shades Surface applied film Cellular shade Window quilt Seasonal film kit Louvered blinds Roller shades Solar screens...

  8. Attachment Q

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2010 2 TABLE L List of Off-Site Waste Management Facilities that May Return Treatment-Derived Waste or Waste Residuals to the Los Alamos National Laboratory Off-Site Facility EPA...

  9. Attachment 4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O DBiomass andAtoms for Peace after 50 Years: The-66|4 of1 of

  10. Attachment I

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O DBiomass andAtoms for Peace after 50 Years: The-66|4

  11. ATTACHMENT J

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsicloudden Documentation DataStreamsTotalproposals duenationalMeeting -Contract No.

  12. DOE/RL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding Low-Cost2 DOE HQSiteo n n e v i l0-27ATTACHMENTS February

  13. Fiber-optic strain gauge with attached ends and unattached microbend section

    DOE Patents [OSTI]

    Weiss, Jonathan D. (Albuquerque, NM)

    1992-01-01

    A strain gauge is made of an optical fiber into which quasi-sinusoidal microbends have been permanently introduced. The permanent microbends cause a reduction in the fiber's optical transmission, but, when the gauge is attached to a substrate that is subsequently strained, the amplitude of the deformations will diminish and the optical transmission through the fiber will increase. An apparatus and process for manufacturing these microbends into the optical fiber through a heat-set process is employed; this apparatus and process includes a testing and calibration system.

  14. Fiber-optic strain gauge with attached ends and unattached microbend section

    DOE Patents [OSTI]

    Weiss, J.D.

    1992-07-21

    A strain gauge is made of an optical fiber into which quasi-sinusoidal microbends have been permanently introduced. The permanent microbends cause a reduction in the fiber's optical transmission, but, when the gauge is attached to a substrate that is subsequently strained, the amplitude of the deformations will diminish and the optical transmission through the fiber will increase. An apparatus and process for manufacturing these microbends into the optical fiber through a heat-set process is employed; this apparatus and process includes a testing and calibration system. 5 figs.

  15. Growth of Smaller Grain Attached on Larger One: Algorithm to Overcome Unphysical Overlap between Grain

    E-Print Network [OSTI]

    Acep Purqon; Sparisoma Viridi

    2014-11-01

    As a smaller grain, which is attached on larger one, is growing, it pushes also the larger one and other grains in its surrounding. In a simulation of similar system, repulsive force such as contact force based on linear spring-dashpot model can not accommodate this situation when cell growing rate is faster than simulation time step, since it produces sudden large overlap between grains that makes unphysical result. An algorithm that preserves system linear momentum by introducing additional velocity induced by cell growth is presented in this work. It should be performed in an implicit step. The algorithm has successfully eliminated unphysical overlap.

  16. Section L Attachment I - Summary and Fee Sheet Amendment 000002.xlsx

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal ofNational Nuclear SecuritySecurityriver siteL, Attachment E,E,GI

  17. Attachment I: Approval of Agreement-in-Principal with the State of Alaska |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p u tCorporationIt'sDOE Phasedare listed in Attachment F

  18. Attachment to Policy Flash on New Procedures for Submitting Clause or Template Changes

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p u tCorporationIt'sDOE Phasedare listed in Attachment FNew

  19. The role of male-male relationships in partner violence treatment groups: the effects of improving same sex relationships on attachment 

    E-Print Network [OSTI]

    Barnes, Ashley D.

    2009-05-15

    to others, modulate distress, and alter focus on the self, others, and the environment (Pistole, 1989). Hazan and Shaver (1987) expanded Ainsworth?s explanation of attachment in infancy and early childhood, and discussed adult attachment behaviors... (Sauer, Lopez, & Gormley, 2003). Secure individuals are also generally more expressive, show greater selflessness, and less game playing in their relationships with others (Collins & Read, 1990). Pistole (1989) reports that securely attached...

  20. Nevada National Security Site Environmental Report 2013 Attachment A: Site Description

    SciTech Connect (OSTI)

    Wills, C.

    2014-09-09

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  1. Nevada National Security Site Environmental Report 2012 Attachment A: Site Description

    SciTech Connect (OSTI)

    Wills, Cathy A

    2013-09-11

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  2. Low-resistivity photon-transparent window attached to photo-sensitive silicon detector

    DOE Patents [OSTI]

    Holland, Stephen Edward (Hercules, CA)

    2000-02-15

    The invention comprises a combination of a low resistivity, or electrically conducting, silicon layer that is transparent to long or short wavelength photons and is attached to the backside of a photon-sensitive layer of silicon, such as a silicon wafer or chip. The window is applied to photon sensitive silicon devices such as photodiodes, charge-coupled devices, active pixel sensors, low-energy x-ray sensors and other radiation detectors. The silicon window is applied to the back side of a photosensitive silicon wafer or chip so that photons can illuminate the device from the backside without interference from the circuit printed on the frontside. A voltage sufficient to fully deplete the high-resistivity photosensitive silicon volume of charge carriers is applied between the low-resistivity back window and the front, patterned, side of the device. This allows photon-induced charge created at the backside to reach the front side of the device and to be processed by any circuitry attached to the front side. Using the inventive combination, the photon sensitive silicon layer does not need to be thinned beyond standard fabrication methods in order to achieve full charge-depletion in the silicon volume. In one embodiment, the inventive backside window is applied to high resistivity silicon to allow backside illumination while maintaining charge isolation in CCD pixels.

  3. Nevada National Security Site Environmental Report 2011 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills, ed.

    2012-09-12

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2011. Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  4. The Effect of an Externally Attached Neutrally Buoyant Transmitter on Mortal Injury during Simulated Hydroturbine Passage

    SciTech Connect (OSTI)

    Brown, Richard S.; Pflugrath, Brett D.; Carlson, Thomas J.; Deng, Zhiqun

    2012-02-03

    On their seaward migration, juvenile salmonids commonly pass hydroelectric dams. Fish passing through hydroturbines experience a rapid decrease in pressure as they pass by the turbine blade and the severity of this decompression can be highly variable. This rapid decrease in pressure can result in injuries such as swim bladder rupture, exophthalmia, and emboli and hemorrhaging in the fins and tissues. However, recent research indicates that the presence of a telemetry tag (acoustic, radio, inductive) implanted inside the coelom of a juvenile salmon increases the likelihood that the fish will be injured or die during turbine passage. Thus, previous research conducted using telemetry tags implanted into the coelom of fish may have been inaccurate. Thus, a new technique is needed to provide unbiased estimates of survival through turbines. This research provides an evaluation of the effectiveness of a neutrally buoyant externally attached acoustic transmitter. Both nontagged fish and fish tagged with a neutrally buoyant external transmitter were exposed to a range of rapid decompressions simulating turbine passage. Juvenile Chinook salmon tagged with a neutrally buoyant externally attached acoustic transmitter did not receive a higher degree of barotrauma than their nontagged counterparts. We suggest that future research include field-based comparisons of survival and behavior among fish tagged with a neutrally buoyant external transmitter and those internally implanted with transmitters.

  5. Steps in Validating Scrape-Off Layer Simulations of Attached and Detached Plasmas in the JET ITER-Like Wall Configuration

    E-Print Network [OSTI]

    Steps in Validating Scrape-Off Layer Simulations of Attached and Detached Plasmas in the JET ITER-Like Wall Configuration

  6. Text-Alternative Version of Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments

    Broader source: Energy.gov [DOE]

    Text-Alternative Version of Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments

  7. Composite materials with metal oxide attached to lead chalcogenide nanocrystal quantum dots with linkers

    DOE Patents [OSTI]

    Fuke, Nobuhiro; Koposov, Alexey Y; Sykora, Milan; Hoch, Laura

    2014-12-16

    Composite materials useful for devices such as photoelectrochemical solar cells include a substrate, a metal oxide film on the substrate, nanocrystalline quantum dots (NQDs) of lead sulfide, lead selenide, and lead telluride, and linkers that attach the NQDs to the metal oxide film. Suitable linkers preserve the 1s absorption peak of the NQDs. A suitable linker has a general structure A-B-C where A is a chemical group adapted for binding to a MO.sub.x and C is a chemical group adapted for binding to a NQD and B is a divalent, rigid, or semi-rigid organic spacer moiety. Other linkers that preserve the 1s absorption peak may also be used.

  8. Attachment of a Hydrophobically Modified Biopolymer at the Oil-Water Interface in the Treatment of Oil Spills

    E-Print Network [OSTI]

    Raghavan, Srinivasa

    Attachment of a Hydrophobically Modified Biopolymer at the Oil- Water Interface in the Treatment of Oil Spills Pradeep Venkataraman, Jingjian Tang, Etham Frenkel, Gary L. McPherson, Jibao He,§ Srinivasa: The stability of crude oil droplets formed by adding chemical dispersants can be considerably enhanced

  9. EXPERIMENT #3 REFLECTANCE SPECTROSCOPY We will use the reflectance attachment and fiber optics OceanOptics spectrophotometer to

    E-Print Network [OSTI]

    Nazarenko, Alexander

    EXPERIMENT #3 REFLECTANCE SPECTROSCOPY We will use the reflectance attachment and fiber optics OceanOptics spectrophotometer to measure the reflectance spectrum of several paint samples in the special optically flat-bottomed cell so that the bottom is completely covered. Scan the reflectance

  10. THE EFFECTS OF ELECTRON BEAM IRRADIATION AND SANITIZERS IN THE REDUCTION OF PATHOGENS AND ATTACHMENT PREVENTION ON SPINACH 

    E-Print Network [OSTI]

    Neal, Jack A.

    2010-07-14

    The effects of electron beam (e-beam) irradiation and sanitizers in the reduction of Escherichia coli O157:H7 and Salmonella counts and attachment prevention on spinach was studied. Survival of these pathogens in spinach was observed at multiple...

  11. Direct measurement of the characteristic three-body electron attachment time in the atmospheric air in direct current electric field

    SciTech Connect (OSTI)

    Shutov, A. V.; Smetanin, I. V.; Ionin, A. A.; Levchenko, A. O.; Seleznev, L. V.; Sinitsyn, D. V.; Ustinovskii, N. N.; Zvorykin, V. D.

    2013-07-15

    We report the results of theoretical and experimental study of the characteristic time for three-body attachment of electrons produced by 100 fs UV laser pulse in the atmosphere air in the external DC electric field ranged from 0.2 to 10 kV/cm.

  12. Condensation Risk of Mechanically Attached Roof Systems in Cold Climate Zones

    SciTech Connect (OSTI)

    Pallin, Simon B [ORNL

    2013-01-01

    A white roof, cool roof, is constructed to decrease thermal loads from solar radiation, therefore saving energy by decreasing the cooling demands. Unfortunately, cool roofs with mechanically attached membrane, have shown to have a higher risk of intermediate condensation in the materials below the membrane in certain climates (Ennis & Kehrer, 2011) and in comparisons with similar construction with a darker exterior surface (Bludau, Zirkelbach, & Kuenzel, 2009). As a consequence, questions have been raised regarding the sustainability and reliability of using cool roof membranes in Northern U.S. climate zones. A white roof surface reflects more of the incident solar radiation in comparisons with a dark surface, which makes a distinguished difference on the surface temperature of the roof. However, flat roofs with either a light or dark surface and if facing a clear sky, are constantly losing energy to the sky due to the exchange of infrared radiation. This phenomenon exists both during the night and the day. During the day, if the sun shines on the roof surface, the exchange of infrared radiation typically becomes insignificant. During nights and in cold climates, the temperature difference between the roof surface and the sky can deviate up to 20 C (Hagentoft, 2001) which could result in a very cold surface temperature compared to the ambient temperature. Further, a colder surface temperature of the roof increases the energy loss and the risk of condensation in the building materials below the membrane. In conclusion, both light and dark coated roof membranes are cooled by the infrared radiation exchange during the night, though a darker membrane is more heated by the solar radiation during the day, thus decreasing the risk of condensation. The phenomenon of night time cooling from the sky and the lack of solar gains during the day is not likely the exclusive problem concerning the risk of condensation in cool roofs with mechanically attached membranes. Roof systems with thermoplastic membranes are prone to be more effected by interior air intrusion into the roof construction; both due to the wind induced pressure differences and due to the flexibility and elasticity of the membrane (Molleti, Baskaran, Kalinger, & Beaulieu, 2011). Depending on the air permeability of the material underneath the membrane, wind forces increase the risk of fluttering (also referred as billowing) of the thermoplastic membrane. Expectably, the wind induced pressure differences creates a convective air flow into the construction i.e. Page 2 air intrusion. If the conditions are right, moisture from the exchanging air may condensate on surfaces with a temperature below dew-point. The definite path of convective airflows through the building envelope is usually very difficult to determine and therefore simplified models (K nzel, Zirkelbach, & Scfafaczek, 2011) help to estimate an additional moisture loads as a result of the air intrusion. The wind uplifting pressure in combination with wind gusts are important factors for a fluttering roof. Unfortunately, the effect from a fluctuating wind is difficult to estimate as this is a highly dynamic phenomenon and existing standards (ASTM, 2011a) only take into account a steady state approach i.e. there is no guidance or regulations on how to estimate the air intrusion rate. Obviously, a more detailed knowledge on the hygrothermal performance of mechanically attached cool roof system is requested; in consideration to varying surface colors, roof air tightness, climate zones and indoor moisture supply.

  13. Method and apparatus for jetting, manufacturing and attaching uniform solder balls

    DOE Patents [OSTI]

    Yost, Frederick G. (Cedar Crest, NM); Frear, Darrel R. (Albuquerque, NM); Schmale, David T. (Albuquerque, NM)

    1999-01-01

    An apparatus and process for jetting molten solder in the form of balls directly onto all the metallized interconnects lands for a ball grid array package in one step with no solder paste required. Molten solder is jetted out of a grid of holes using a piston attached to a piezoelectric crystal. When voltage is applied to the crystal it expands forcing the piston to extrude a desired volume of solder through holes in the aperture plate. When the voltage is decreased the piston reverses motion creating an instability in the molten solder at the aperture plate surface and thereby forming spherical solder balls that fall onto a metallized substrate. The molten solder balls land on the substrate and form a metallurgical bond with the metallized lands. The size of the solder balls is determined by a combination of the size of the holes in the aperture plate, the duration of the piston pulse, and the displacement of the piston. The layout of the balls is dictated by the location of the hooks in the grid. Changes in ball size and layout can be easily accomplished by changing the grid plate. This invention also allows simple preparation of uniform balls for subsequent supply to BGA users.

  14. EMP Attachment 3 DOE-SC PNNL Site Dose Assessment Guidance

    SciTech Connect (OSTI)

    Snyder, Sandra F.

    2011-12-21

    This Dose Assessment Guidance (DAG) describes methods to use to determine the Maximally-Exposed Individual (MEI) location and to estimate dose impact to that individual under the U.S. Department of Energy Office of Science (DOE-SC) Pacific Northwest National Laboratory (PNNL) Site Environmental Monitoring Plan (EMP). This guidance applies to public dose from radioactive material releases to the air from PNNL Site operations. This document is an attachment to the Pacific Northwest National Laboratory (PNNL) Environmental Monitoring Plan (EMP) and describes dose assessment guidance for radiological air emissions. The impact of radiological air emissions from the U.S. Department of Energy Office of Science (DOE-SC) PNNL Site is indicated by dose estimates to a maximally exposed member of the public, referred to as the maximally exposed individual (MEI). Reporting requirements associated with dose to members of the public from radiological air emissions are in 40 CFR Part 61.94, WAC 246-247-080, and DOE Order 458.1. The DOE Order and state standards for dose from radioactive air emissions are consistent with U.S. Environmental Protection Agency (EPA) dose standards in 40 CFR 61.92 (i.e., 10 mrem/yr to a MEI). Despite the fact that the current Contract Requirements Document (CRD) for the DOE-SC PNNL Site operations does not include the requirement to meet DOE CRD 458.1, paragraph 2.b, public dose limits, the DOE dose limits would be met when EPA limits are met.

  15. Technology Solutions Case Study: Cladding Attachment Over Thick Exterior Insulating Sheathing

    SciTech Connect (OSTI)

    2013-11-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of wood-framed walls and mass masonry wall assemblies. Insulation on the exterior of the structure has many direct benefits, including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased airtightness and improved water management. Although the approach has proven effective, there is resistance to its widespread implementation due to a lack of research and understanding of the mechanisms involved in the development of the vertical displacement resistance capacity. In addition, the long-term in-service performance of the system has been questioned due to potential creep effects of the assembly under the sustained dead load of the cladding and effects of varying environmental conditions. In addition, the current International Building Code (IBC) and International Residential Code (IRC) do not have a provision that specifically allows this assembly. In this project, researchers from Building Science Corporation, a Building America team, investigated these issues to better understand the mechanics behind this method of cladding attachment

  16. Co-repressor activity of scaffold attachment factor B1 requires sumoylation

    SciTech Connect (OSTI)

    Garee, Jason P.; Meyer, Rene; Systems Biology of Signal Transduction, German Cancer Research Center , INF 280, 69120 Heidelberg ; Oesterreich, Steffi

    2011-05-20

    Highlights: {yields} SAFB1 is sumoylated to two lysine residues K231 and K294. {yields} SAFB1 sumoylation is regulated by PIAS1 and SENP1. {yields} Sumoylation of SAFB1 regulates its transcriptional repressor activity. {yields} Mutation of sumoylation sites leads to decreased SAFB1 binding to HDAC3. -- Abstract: Sumoylation is an emerging modification associated with a variety of cellular processes including the regulation of transcriptional activities of nuclear receptors and their coregulators. As SUMO modifications are often associated with transcriptional repression, we examined if sumoylation was involved in modulation of the transcriptional repressive activity of scaffold attachment factor B1. Here we show that SAFB1 is modified by both the SUMO1 and SUMO2/3 family of proteins, on lysine's K231 and K294. Further, we demonstrate that SAFB1 can interact with PIAS1, a SUMO E3 ligase which mediates SAFB1 sumoylation. Additionally, SENP1 was identified as the enzyme desumoylating SAFB1. Mutation of the SAFB1 sumoylation sites lead to a loss of transcriptional repression, at least in part due to decreased interaction with HDAC3, a known transcriptional repressor and SAFB1 binding partner. In summary, the transcriptional repressor SAFB1 is modified by both SUMO1 and SUMO2/3, and this modification is necessary for its full repressive activity.

  17. Nevada National Security Site Environmental Report 2010, Attachment A: Site Description

    SciTech Connect (OSTI)

    C. Wills, ed.

    2011-09-13

    Introduction to the Nevada National Security Site Environmental Report 2010. Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  18. Resumption of SPR US Strategic Petroleum Reserve fill attached to synfuels bill

    SciTech Connect (OSTI)

    Not Available

    1980-06-23

    House-Senate conferees approved a bill which would establish a $20 billion US Synthetic Fuels Corp., a $3.1 billion bank to fund energy conservation and solar energy projects, a $1.4 billion biomass-to-energy program, and other energy conservation and production measures. An order requiring the filling of the SPR at a minimum average rate of 100,000 bbl/day beginning 10/1/80 was attached to the bill. If that rate is not achieved, the SPR measure requires that Elk Hills, Calif., field crude be sold or exchanged to acquire other crude for the SPR. Some OPEC members have threatened to reduce their output if the US buys oil for storage. The SPR measure will increase US refiners' crude-acquisition costs by $0.04/gal, which will be passed along to purchasers. The SPR goal is 750 million bbl of crude; current capacity is 250 million bbl, with only 91.7 million bbl in place. A House subcommittee issued a report recommending that the 118,000 bbl/day oil production from US National Petroleum Reserves (NPR) be reserved for the US Department of Defense (DOD) and stored in the SPR, but criticizing DOD for inefficiencies in its energy office, inadequate conversion to coal, and inadequate storage facilities.

  19. Trial Run of a Junction-Box Attachment Test for Use in Photovoltaic Module Qualification (Presentation)

    SciTech Connect (OSTI)

    Miller, D.; Deibert, S.; Wohlgemuth, J.

    2014-06-01

    Engineering robust adhesion of the junction-box (j-box) is a hurdle typically encountered by photovoltaic (PV) module manufacturers during product development and manufacturing process control. There are historical incidences of adverse effects (e.g., fires), caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp-heat', 'thermal-cycle', or 'creep' tests within the IEC qualification protocol is proposed to verify the basic robustness of the adhesion system. The details of the proposed test are described, in addition to a trial run of the test procedure. The described experiments examine 4 moisture-cured silicones, 4 foam tapes, and a hot-melt adhesive used in conjunction with glass, KPE, THV, and TPE substrates. For the purpose of validating the experiment, j-boxes were adhered to a substrate, loaded with a prescribed weight, and then subjected to aging. The replicate mock-modules were aged in an environmental chamber (at 85 deg C/85% relative humidity for 1000 hours; then 100 degrees C/<10% relative humidity for 200 hours) or fielded in Golden, Miami, and Phoenix for 1 year. Attachment strength tests, including pluck and shear test geometries, were also performed on smaller component specimens.

  20. Resource conservation and recovery act draft hazardous waste facility permit: Waste Isolation Pilot Plant (WIPP). Attachments: Volume 4 of 4

    SciTech Connect (OSTI)

    Not Available

    1993-08-01

    Volume IV contains the following attachments for Module IV: VOC monitoring plan for bin-room tests (Appendix D12); bin emission control and VOC monitoring system drawings; bin scale test room ventilation drawings; WIPP supplementary roof support system, underground storage area, room 1, panel 1, DOE/WIPP 91-057; and WIPP supplementary roof support system, room 1, panel 1, geotechnical field data analysis bi-annual report, DOE/WIPP 92-024.

  1. Gateway clone primer design The proper design of attB-attached primer is a crucial point for the BP and LR reaction of

    E-Print Network [OSTI]

    Lamitina, Todd

    Gateway clone primer design The proper design of attB-attached primer is a crucial point for the BP. Green: is the the nucleotide(s) added to keep the sequence in the right reading frame. You can change

  2. Ethanol Waivers: Needed or Irrelevant? 

    E-Print Network [OSTI]

    Griffin, James M.; Dahl, Rachel

    2012-01-01

    Because of the magnitude of the existing corn harvest shortfall coupled with the large ethanol mandates, policymakers face extreme uncertainties looking into the future with potentially large economic ramifications. Precisely, because neither...

  3. III. Waiver of Proposed Rulemaking

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergy HeadquartersFuelB IMSofNewsletterGuidingUpdateofMarch 21,Los

  4. Clear Identification of Previously Unresolved Overlapping Resonances in Dissociative Electron Attachment: A Case Study on Chlorine Molecule

    E-Print Network [OSTI]

    Nag, Pamir

    2015-01-01

    An observed broad resonance peak in dissociative electron attachment (DEA) cross sections to a molecule might be due to either closely lying or overlapping resonances involved in the process. We developed a state-of-the-art experimental approach that enables us to identify unambiguously both the closely lying and the overlapping resonances based on kinetic energy and/or angular distribution measurements of fragment negative ion(s) generated from DEA process. Experimental observations strongly supported by theoretical potential energy curve calculations unambiguously identify previously unresolved overlapping resonances in DEA to chlorine molecule.

  5. Mission Support Contract Attachment J.10 Contract No. DE-AC06-09RL14728 Modification 464

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on77 PAGE OFDetectionBenchmarkResultsperi DOElEIAMissionAttachment

  6. Determining Orientational Structure of Diamondoid Thiols Attached to Silver Using Near Edge X-ray Absorption Fine Structure Spectroscopy

    SciTech Connect (OSTI)

    Willey, T M; Lee, J I; Fabbri, J D; Wang, D; Nielsen, M; Randel, J C; Schreiner, P R; Fokin, A A; Tkachenko, B A; Fokina, N A; Dahl, J P; Carlson, R K; Terminello, L J; Melosh, N A; van Buuren, T

    2008-10-07

    Near-edge x-ray absorption fine structure spectroscopy (NEXAFS) is a powerful tool for determination of molecular orientation in self-assembled monolayers and other surface-attached molecules. A general framework for using NEXAFS to simultaneously determine molecular tilt and twist of rigid molecules attached to surfaces is presented. This framework is applied to self-assembled monolayers of higher diamondoid, hydrocarbon molecules with cubic-diamond-cage structures. Diamondoid monolayers chemisorbed on metal substrates are known to exhibit interesting electronic and surface properties. This work compares molecular orientation in monolayers prepared on silver substrates using two different thiol positional isomers of [121]tetramantane, and thiols derived from two different pentamantane structural isomers, [1212]pentamantane and [1(2,3)4]pentamantane. The observed differences in monolayer structure demonstrate the utility and limitations of NEXAFS spectroscopy and the framework. The results also demonstrate the ability to control diamondoid assembly, in particular the molecular orientational structure, providing a flexible platform for the modification of surface properties with this exciting new class of nanodiamond materials.

  7. Effect of particles attachment to multi-sized dust grains present in electrostatic sheaths of discharge plasmas

    SciTech Connect (OSTI)

    Zaham, B.; Tahraoui, A. Chekour, S.; Benlemdjaldi, D.

    2014-12-15

    The loss of electrons and ions due to their attachment to a Gauss-distributed sizes of dust grains present in electrostatic sheaths of discharge plasmas is investigated. A uni-dimensional, unmagnetized, and stationary multi-fluid model is proposed. Forces acting on the dust grain along with its charge are self-consistently calculated, within the limits of the orbit motion limited model. The dynamic analysis of dust grains shows that the contribution of the neutral drag force in the net force acting on the dust grain is negligible, whereas the contribution of the gravity force is found considerable only for micrometer particles. The dust grains trapping is only possible when the electrostatic force is balanced by the ion drag and the gravity forces. This trapping occurs for a limited radius interval of micrometer dust grains, which is around the most probable dust grain radius. The effect of electron temperature and ion density at the sheath edge is also discussed. It is shown that the attachment of particles reduces considerably the sheath thickness and induces dust grain deceleration. The increase of the lower limit as well as the upper limit of the dust radius reduces also the sheath thickness.

  8. In-Situ TEM Study Of Lithiation Behavior Of Silicon Nanoparticles Attached To And Embedded In A Carbon Matrix

    SciTech Connect (OSTI)

    Gu, Meng; Li, Ying; Li, Xiaolin; Hu, Shenyang Y.; Zhang, Xiangwu; Xu, Wu; Thevuthasan, Suntharampillai; Baer, Donald R.; Zhang, Jiguang; Liu, Juan; Wang, Chong M.

    2012-08-23

    Rational design of silicon and carbon nanocomposite with a special topological feature has been demonstrated to be a feasible way for mitigating the capacity fading associated with the large volume change of silicon anode in lithium ion batteries. Although the lithiation behavior of silicon and carbon as individual component has been well understood, lithium ion transport behavior across a network of silicon and carbon are still lacking. In this paper, we probe the lithiation behavior of silicon nanoparticles attached to and embedded in a carbon nanofiber using in-situ TEM and continuum mechanical calculation. We found that aggregated silicon nanoparticles show contact flattering upon initial lithiation, which is characteristically analogous to the classic sintering of powder particles by neck-growth mechanism. As compared with the surface-attached silicon particle, particles embedded in the carbon matrix show delayed lithiation. Depending on the strength of the carbon matrix, lithiation of the embedded silicon nanoparticle can lead to the fracture of the carbon fiber. These observations provide insights on lithium ion transport in the network structured composite of silicon and carbon, and ultimately provide fundamental guidance for mitigating the failure of battery due to the large volume change of silicon anode.

  9. REGULATIONS FOR PAID DOCTORATE STUDIES

    E-Print Network [OSTI]

    Borissova, Daniela

    . an autobiography (CV) on European model; 2. a copy of the diploma for the educational-qualification degree "Master). The following documents must be attached to the petition: 1. an autobiography (CV) on European model (in

  10. Development of a Chemoenzymatic-like and Photoswitchable Method for the Ordered Attachment of Proteins to Surfaces

    SciTech Connect (OSTI)

    Camarero, J A; Kwon, Y; Coleman, M

    2005-02-11

    Protein arrays are the best tool for the rapid analysis of a whole proteome thus helping to identify all the protein/protein interactions in a living cell and they can also be used as powerful biosensors. The objective of this proposal is to develop a new entropically activated ligation method based in the naturally occurring protein trans-splicing process. This method will be used for the generation of spatially addressable arrays of multiple protein components by standard photolithographic techniques. Key to our approach is the use of the protein trans-splicing process. This naturally occurring process will allow us to create a truly generic and highly efficient method for the covalent attachment of proteins through its C-terminus to any solid support.

  11. Towards understanding of Nipah virus attachment protein assembly and the role of protein affinity and crowding for membrane curvature events.

    SciTech Connect (OSTI)

    Stachowiak, Jeanne C.; Hayden, Carl C.; Negrete, Oscar A.; Davis, Ryan Wesley; Sasaki, Darryl Yoshio

    2013-10-01

    Pathogenic viruses are a primary threat to our national security and to the health and economy of our world. Effective defense strategies to combat viral infection and spread require the development of understanding of the mechanisms that these pathogens use to invade the host cell. We present in this report results of our research into viral particle recognition and fusion to cell membranes and the role that protein affinity and confinement in lipid domains plays in membrane curvature in cellular fusion and fission events. Herein, we describe 1) the assembly of the G attachment protein of Nipah virus using point mutation studies to define its role in viral particle fusion to the cell membrane, 2) how lateral pressure of membrane bound proteins induce curvature in model membrane systems, and 3) the role of membrane curvature in the selective partitioning of molecular receptors and specific affinity of associated proteins.

  12. Stigma models: Testing hypotheses of how images of Nevada are acquired and values are attached to them

    SciTech Connect (OSTI)

    Jenkins-Smith, H.C.

    1994-12-01

    This report analyzes data from surveys on the effects that images associated with nuclear power and waste (i.e., nuclear images) have on people`s preference to vacation in Nevada. The analysis was stimulated by a model of imagery and stigma which assumes that information about a potentially hazardous facility generates signals that elicit negative images about the place in which it is located. Individuals give these images negative values (valences) that lessen their desire to vacation, relocate, or retire in that place. The model has been used to argue that the proposed Yucca Mountain high-level nuclear waste repository could elicit images of nuclear waste that would stigmatize Nevada and thus impose substantial economic losses there. This report proposes a revised model that assumes that the acquisition and valuation of images depend on individuals` ideological and cultural predispositions and that the ways in which new images will affect their preferences and behavior partly depend on these predispositions. The report tests these hypotheses: (1) individuals with distinct cultural and ideological predispositions have different propensities for acquiring nuclear images, (2) these people attach different valences to these images, (3) the variations in these valences are important, and (4) the valences of the different categories of images within an individual`s image sets for a place correlate very well. The analysis largely confirms these hypotheses, indicating that the stigma model should be revised to (1) consider the relevant ideological and cultural predispositions of the people who will potentially acquire and attach value to the image, (2) specify the kinds of images that previously attracted people to the host state, and (3) consider interactions between the old and potential new images of the place. 37 refs., 18 figs., 17 tabs.

  13. Attachment of Cells to Islands Presenting Gradients of Adhesion Ligands Rafe T. Petty, Hung-Wing Li, Jane H. Maduram, Rustem Ismagilov, and Milan Mrksich*

    E-Print Network [OSTI]

    Ismagilov, Rustem F.

    Attachment of Cells to Islands Presenting Gradients of Adhesion Ligands Rafe T. Petty, Hung-Wing Li@uchicago.edu Mammalian and bacterial cells live in gradients. Soluble and immobilized gradients of signaling proteins guide the trafficking of cells and direct their development and maintenance.1 New methods to determine

  14. Dear NASA Langley Experiment Participant: This email and the attached files are intended to provide you with an overview of the upcoming

    E-Print Network [OSTI]

    Kaber, David B.

    Dear NASA Langley Experiment Participant: This email and the attached files are intended to provide. The experiment is part of a NASA project on the study of measures and models of aviation display clutter this prior to your visit to NASA Langley. You will also find an informed consent form that summarizes

  15. Steps for Chemical "Hazardous Waste" Removal 1. Complete a Green Hazardous Waste tag and attach to waste container. This is required for each individual item to

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Steps for Chemical "Hazardous Waste" Removal 1. Complete a Green Hazardous Waste tag and attach by calling 5-8200 or by e-mailing waste_tech@cornell.edu ) 2. Place all Hazardous Waste containers into a UN. Leave top copy of Hazardous Waste tag in the box with the items to be removed 4. Submit a request

  16. This article was originally published in a journal published by Elsevier, and the attached copy is provided by Elsevier for the

    E-Print Network [OSTI]

    Kjelstrup, Signe

    - ing industries, accounting for about 4% of world energy consumption1 according to the World Energy of thermal by electrical energy should therefore also be evaluated from a second law perspective whereThis article was originally published in a journal published by Elsevier, and the attached copy

  17. Chiral Attachment of Styrene Mediated by Surface Dimers on Ge(100) Yun Jeong Hwang, Ansoon Kim, Eunkyung Hwang, and Sehun Kim*

    E-Print Network [OSTI]

    Kim, Sehun

    Chiral Attachment of Styrene Mediated by Surface Dimers on Ge(100) Yun Jeong Hwang, Ansoon Kim + 2] cycloaddition forming di- bonds.5 We expect that styrene (C6H5-CHdCH2) molecules on Ge(100) may to the orientation of the phenyl ring of each styrene molecule: the diastereomeric (R,S) and the enantio- meric (R

  18. This article was published in an Elsevier journal. The attached copy is furnished to the author for non-commercial research and

    E-Print Network [OSTI]

    Wood, Thomas K.

    This article was published in an Elsevier journal. The attached copy is furnished to the authorFerrin Department of Chemical Engineering Texas A & M University College Station TX 77843-3122, USA 2 Department. Abbreviations used: -OG, -octyl--D-glucopyranoside; EMSA, electrophoretic mobility-shift assay; MALDI-TOF MS

  19. Attachment A -Page 1 Attachment A

    E-Print Network [OSTI]

    California at San Diego, University of

    , or other explosive substances is prohibited. The possession of BB guns, pellet guns, air guns, sling shots

  20. Trial-Run of a Junction-Box Attachment Test for Use in Photovoltaic Module Qualification: Preprint

    SciTech Connect (OSTI)

    Miller, D. C.; Deibert, S. L.; Wohlgemuth, J. H.

    2014-06-01

    Engineering robust adhesion of the junction box (j-box) is a hurdle typically encountered by photovoltaic module manufacturers during product development and manufacturing process control. There are historical incidences of adverse effects (e.g., fires) caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp-heat,' 'thermal-cycle,' or 'creep' tests within the IEC qualification protocol is proposed to verify the basic robustness of the adhesion system. The details of the proposed test are described, in addition to a trial-run of the test procedure. The described experiments examine four moisture-cured silicones, four foam tapes, and a hot-melt adhesive used in conjunction with glass, KPE, THV, and TPE substrates. For the purpose of validating the experiment, j-boxes were adhered to a substrate, loaded with a prescribed weight, and then subjected to aging. The replicate mock-modules were aged in an environmental chamber (at 85 degrees C/85% relative humidity for 1000 hours; then 100 degrees C/<10% relative humidity for 200 hours) or fielded in Golden (CO), Miami (FL), and Phoenix (AZ) for one year. Attachment strength tests, including pluck and shear test geometries, were also performed on smaller component specimens.

  1. Mapping analysis of scaffold/matrix attachment regions (s/MARs) from two different mammalian cell lines

    SciTech Connect (OSTI)

    Pilus, Nur Shazwani Mohd; Ahmad, Azrin; Yusof, Nurul Yuziana Mohd [School of Bioscience and Biotechnology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia); Johari, Norazfa [Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia)

    2014-09-03

    Scaffold/matrix attachment regions (S/MARs) are potential element that can be integrated into expression vector to increase expression of recombinant protein. Many studies on S/MAR have been done but none has revealed the distribution of S/MAR in a genome. In this study, we have isolated S/MAR sequences from HEK293 and Chinese hamster ovary cell lines (CHO DG44) using two different methods utilizing 2 M NaCl and lithium-3,5-diiodosalicylate (LIS). The isolated S/MARs were sequenced using Next Generation Sequencing (NGS) platform. Based on reference mapping analysis against human genome database, a total of 8,994,856 and 8,412,672 contigs of S/MAR sequences were retrieved from 2M NaCl and LIS extraction of HEK293 respectively. On the other hand, reference mapping analysis of S/MAR derived from CHO DG44 against our own CHO DG44 database have generated a total of 7,204,348 and 4,672,913 contigs from 2 M NaCl and LIS extraction method respectively.

  2. A quantum chemical study from a molecular perspective: ionization and electron attachment energies for species often used to fabricate single-molecule junctions

    E-Print Network [OSTI]

    Baldea, Ioan

    2015-01-01

    The accurate determination of the lowest electron attachment ($EA$) and ionization ($IP$) energies for molecules embedded in molecular junctions is important for correctly estimating, \\emph{e.g.}, the magnitude of the currents ($I$) or the biases ($V$) where an $I-V$-curve exhibits a significant non-Ohmic behavior. Benchmark calculations for the lowest electron attachment and ionization energies of several typical molecules utilized to fabricate single-molecule junctions characterized by n-type conduction (4,4'-bipyridine, 1,4-dicyanobenzene, and 4,4'-dicyano-1,1'-biphenyl) and p-type conduction (benzenedithiol, biphenyldithiol, hexanemonothiol, and hexanedithiol] based on the EOM-CCSD (equation-of-motion coupled-cluster singles and doubles) state-of-the-art method of quantum chemistry are presented. They indicate significant differences from the results obtained within current approaches to molecular transport. The present study emphasizes that, in addition to a reliable quantum chemical method, basis sets m...

  3. Cladding Attachment Over Thick Exterior Insulating Sheathing (Fact Sheet), Building America Case Study: Technology Solutions for New and Existing Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based Fuels|Programs |Chart of breakoutCincinnatiMadisonCivilCladding Attachment

  4. Hunter College of the City University of New York -Office of the Registrar DEGREE AUDIT APPLICATION FORM (DAAF) Attachment BA in Adolescent Education: Spanish 7-12 (E80)

    E-Print Network [OSTI]

    Qiu, Weigang

    APPLICATION FORM (DAAF) Attachment BA in Adolescent Education: Spanish 7-12 (E80) LIBERAL ARTS AND SCIENCE Summer SEDC 452.80 Student Teaching in Grades 7-12: Spanish 5 Fall Spring Summer SPED 308* Teaching

  5. Hunter College of the City University of New York -Office of the Registrar DEGREE AUDIT APPLICATION FORM (DAAF) Attachment BA in Adolescent Education: Chinese 7-12 (E51)

    E-Print Network [OSTI]

    Qiu, Weigang

    APPLICATION FORM (DAAF) Attachment BA in Adolescent Education: Chinese 7-12 (E51) LIBERAL ARTS AND SCIENCE Summer SEDC 452.10 Student Teaching in Grades 7-12: Chinese 5 Fall Spring Summer SPED 308* Teaching

  6. Proposal to extend a blanket contract for the supply and maintenance fo Network-Attached Storage systems for Oracle databases and for shared file servers for the LHC experiments

    E-Print Network [OSTI]

    2011-01-01

    Proposal to extend a blanket contract for the supply and maintenance fo Network-Attached Storage systems for Oracle databases and for shared file servers for the LHC experiments

  7. EMERGENCY PREPAREDNESS SYLLABUS ATTACHMENT

    E-Print Network [OSTI]

    gcavigli

    2015-08-25

    shooting or release of hazardous materials in the outside air. ... "Shots Fired on Campus: When Lightning Strikes," is a 20-minute active shooter awareness ...

  8. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, G.L.

    1995-04-11

    A retainer ring is arranged to mount turbine blades to a turbine disk so that aerodynamic forces produced by a gas turbine engine are transferred from the turbine blades to the turbine disk to cause the turbine blades and turbine disk to rotate, but so that centrifugal forces of the turbine blades resulting from the rotation of the turbine blades and turbine disk are not transferred from the turbine blades to the turbine disk. 6 figures.

  9. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, Gary L. (Alpine, CA)

    1995-01-01

    A retainer ring is arranged to mount turbine blades to a turbine disk so that aerodynamic forces produced by a gas turbine engine are transferred from the turbine blades to the turbine disk to cause the turbine blades and turbine disk to rotate, but so that centrifugal forces of the turbine blades resulting from the rotation of the turbine blades and turbine disk are not transferred from the turbine blades to the turbine disk.

  10. Attachment C7

    Office of Environmental Management (EM)

    C7 TRU WASTE CONFIRMATION Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit March...

  11. Attachment A1

    Office of Environmental Management (EM)

    A1 CONTAINER STORAGE Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013...

  12. Attachment G3

    Office of Environmental Management (EM)

    G3 RADIOLOGICAL SURVEYS TO INDICATE POTENTIAL HAZARDOUS WASTE RELEASES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste...

  13. Attachment C4

    Office of Environmental Management (EM)

    C4 TRU MIXED WASTE CHARACTERIZATION USING ACCEPTABLE KNOWLEDGE Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation...

  14. Attachment F2

    Office of Environmental Management (EM)

    F2 TRAINING COURSE AND QUALIFICATION CARD OUTLINES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant...

  15. Attachment C1

    Office of Environmental Management (EM)

    C1 WASTE CHARACTERIZATION TESTING METHODS Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous...

  16. Attachment C3

    Office of Environmental Management (EM)

    C3 QUALITY ASSURANCE OBJECTIVES AND DATA VALIDATION TECHNIQUES FOR WASTE CHARACTERIZATION METHODS Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page...

  17. Attachment A2

    Office of Environmental Management (EM)

    A2 GEOLOGIC REPOSITORY Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October...

  18. Attachment C6

    Office of Environmental Management (EM)

    C6 AUDIT AND SURVEILLANCE PROGRAM Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste...

  19. Attachment G2

    Office of Environmental Management (EM)

    G2 WASTE ISOLATION PILOT PLANT SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally...

  20. Attachment N1

    Office of Environmental Management (EM)

    N1 HYDROGEN AND METHANE MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit January 31, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous...