Sample records for astm specification d910

  1. Biodiesel Progress: ASTM Specifications and 2nd Generation Biodiesel...

    Broader source: Energy.gov (indexed) [DOE]

    Progress: ASTM Specifications and 2nd Generation Biodiesel Biodiesel Progress: ASTM Specifications and 2nd Generation Biodiesel Presentation given at the 2007 Diesel...

  2. Biodiesel Progress: ASTM Specifications and 2nd Generation Biodiesel

    Broader source: Energy.gov (indexed) [DOE]

    Progress: ASTM Specifications and 2 nd Generation Biodiesel Steve Howell Technical Director National Biodiesel Board Detroit, Michigan August 15, 2007 Today's Topics Biodiesel...

  3. Porterfield named ASTM Fellow

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomassPPPOPetroleum38PolaronPorterfield named ASTM Fellow June 18,

  4. Biodiesel ASTM Update and Future Technical Needs

    Broader source: Energy.gov (indexed) [DOE]

    ASTM Update and Future Technical Needs Steve Howell Technical Director National Biodiesel Board ASTM Current Status ASTM D6751 is the approved standard for B100 for blending up to...

  5. Alternative Fuels Data Center: ASTM Biodiesel Specifications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP)MassachusettsExperimental VehicleNatural GasVehicleTexas Laws

  6. astm special technical: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Green Chemistry) (d) Any elective from technical elective category a, b, c, or d POLYMER SCIENCE AND ENGINEERING Grzybowski, Bartosz A. 8 Using ASTM Standards Online The ASTM...

  7. ASTM standards associated with PWR and BWR power plant licensing, operation and surveillance

    SciTech Connect (OSTI)

    McElroy, W.N. [Consultants and Technology Services, Richland, WA (United States); McElroy, R.J. [AEA Reactor Services, Harwell (United Kingdom); Gold, R. [Metrology Control Corp., Richland, WA (United States); Lippincott, E.P. [Westinghouse Electric Corp., Pittsburgh, PA (United States); Lowe, A.L. Jr. [BW Nuclear Technologies, Lynchburg, VA (United States)

    1994-12-31T23:59:59.000Z

    This paper considers ASTM Standards that are available, under revision, and are being considered in support of Pressurized Water Reactor (PWR) and Boiling Water Reactor (BWR) Nuclear Power Plant (NPP) licensing, regulation, operation, surveillance and life attainment. The current activities of ASTM Committee E10 and its Subcommittees E10.02 and current activities of ASTM Committee E10 and its Subcommittees E10.02 and E10.05 and their Task Groups (TG) are described. A very important aspect of these efforts is the preparation, revision, and balloting of standards identified in the ASTM E706 Standard on Master Matrix for Light Water Reactor (LWR) Pressure Vessel (PV) Surveillance Standards. The current version (E706-87) of the Master Matrix identifies 21 ASTM LWR physics-dosimetry-metallurgy standards for Reactor Pressure Vessel (RPV) and Support Structure (SS) surveillance programs, whereas, for the next revision 34 standards are identified. The need for national and international coordination of Standards Technology Development, Transfer and Training (STDTT) is considered in this and other Symposium papers that address specific standards related physics-dosimetry-metallurgy issues. 69 refs.

  8. astm test method: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    astm test method First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 ASTM C39C39M- Compressive Strength of...

  9. astm standard test: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    astm standard test First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Aggregates ASTM C778- Standard...

  10. Biodiesel Progress: ASTM Specifications and 2nd Generation Biodiesel |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The FutureCommentsEnergyand SustainedBio-Oil Deployment inEnergy Outlook

  11. aleacion cu-ni astm: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    x .250 SS - 304L, ASTM A240 70.75 10 2 ROUND, .38 OD x 4.25 SS - 304L, ASTM A276 4.25 9 1 PLATE, 37.50 x McDonald, Kirk First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15...

  12. E-Print Network 3.0 - astm a508 class Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FRC Performance Comparison: Direct Tensile Test, BeamBeamType Bending Test, and Round Panel TestType Bending Test, and Round Panel Test Summary: Test (Third-Point Loading, ASTM...

  13. Processing and properties of superclean ASTM A508 Cl. 4 forgings

    SciTech Connect (OSTI)

    Hinkel, A.V.; Handerhan, K.J. [Ellwood City Forge, PA (United States); Manzo, G.J. [Ellwood Group Inc., PA (United States). Steel Division; Simkins, G.P. [Westinghouse Electric Corp., Pittsburgh, PA (United States)

    1988-12-31T23:59:59.000Z

    Steels with improved resistance to temper embrittlement are now being produced using ``superclean`` steelmaking technology. This technology involves the use of scrap control, proper electric arc furnace and ladle refining furnace practices to produce steel with very low Mn, Si, P, S and other residual impurities such as Sn, As and Sb. This technology has been applied on a production basis to modified ASTM A508 Cl- 4 material intended for high temperature pressure vessel forgings. Processing and properties of this superclean material are reviewed. In addition, the cleanliness and mechanical properties are compared to conventionally melted A508 Cl. 4 material. The ``superclean`` A508 Cl. 4 mod. was found to meet all specification requirements. In addition, the superclean material was found to possess superior upper shelf CVN properties, a lower FATT{sub 50} and NDTT, along with superior microcleanliness compared to conventional material. Finally, the superclean material was found to be immune to temper embrittlement based on the short-term embrittlement treatments examined.

  14. a. ASTM Standard C787-11, Standard Specification for Uranium...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in support of a request for proposals to design, build, and operate facilities to convert depleted uranium hexafluoride (DUF 6 ) to more chemically stable forms. On page C-8 in the...

  15. astm standard activities: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    orientation and phase of the Sun and Moon. And they have important and this results in energy loss and a phase shift in the tidal response of the planet. The specific or tidal...

  16. Overview of ASTM standard activities in support of advanced structural ceramics development

    SciTech Connect (OSTI)

    Brinkman, C.R. [Oak Ridge National Lab., TN (United States); Quinn, G.D. [NIST, Gaithersburg, MD (United States); McClung, R.W.

    1995-07-01T23:59:59.000Z

    An overview is presented of the activities of ASTM Committee C-28 on Advanced Ceramics. This activity originated in 1986 when it became apparent that advanced ceramics were being considered for extensive use in applications such as advanced heat engines, heat exchangers, combustors, etc. in aerospace and energy conservation activities. These applications require optimum material behavior with physical and mechanical property reproducibility, component reliability, and well defined methods of data treatment and material analysis for both monolithic and composite ceramic materials. As new materials are introduced into the market place, these issues are best dealt with via standard methods. Therefore, a progress report is given describing activities of the five standard writing subcommittees who support the ASTM Committee C-28 effort. Accomplishments to date are given, as well as likely future activities, including a brief summary of joint cooperative efforts with international standard formulating organizations.

  17. Development of an ASTM standard guide on performing vulnerability assessments for nuclear facilities

    SciTech Connect (OSTI)

    Wilkey, D.D.

    1995-09-01T23:59:59.000Z

    This paper describes an effort undertaken by subcommittee C26.12 (Safeguards) of the American Society for Testing and Materials (ASTM) to develop a standard guide for performing vulnerability assessments (VAs). VAs are performed to determine the effectiveness of safeguards and security systems for both domestic and international nuclear facilities. These assessments address a range of threats, including theft of nuclear material and sabotage, and use an array of methods. The approach to performing and documenting VAs is varied and is largely dependent upon the tools used to perform them. This diversity can lead to tools being misused, making validation of VAs more difficult. The development of a standard guide for performing VAs would, if generally accepted, alleviate these concerns. ASTM provides a forum for developing guides that includes a high level of peer review to assure that the result is acceptable to all potential users. Additionally, the ASTM is widely recognized for setting standards, and endorsement by the Society may increase the likelihood of acceptance by the nuclear community. The goal of this work is to develop a guide that is independent of the tools being used to perform the VA and applicable to the spectrum of threats described above.

  18. Narrow groove gas tungsten arc welding of ASTM A508 Class 4 steel for improved toughness properties

    SciTech Connect (OSTI)

    Penik, M.A. Jr. [Rensselaer Polytechnic Inst., Troy, NY (United States)

    1997-04-01T23:59:59.000Z

    Welding of heavy section steel has traditionally used the automatic submerged arc welding (ASAW) process because of the high deposition rates achievable. However, the properties, particularly fracture toughness, of the weld are often inferior when compared to base material. This project evaluated the use of narrow groove gas tungsten arc welding (GTAW) to improve weld material properties. The welding procedures were developed for ASTM A508 Class 4 base material using a 1% Ni filler material complying to AWS Specification A.23-90-EF3-F3-N. A narrow groove joint preparation was used in conjunction with the GTAW process so competitive fabrication rates could be achieved when compared to the ASAW process. Weld procedures were developed to refine weld substructure to achieve better mechanical properties. Two heaters of weld wire were used to examine the effects of minor filler metal chemistry differences on weld mechanical properties. Extensive metallographic evaluations showed excellent weld quality with a refined microstructure. Chemical analysis of the weld metal showed minimal weld dilution by the base metal. Mechanical testing included bend and tensile tests to ensure weld quality and strength. A Charpy impact energy curve versus temperature and fracture toughness curve versus temperature were developed for each weld wire heat. Results of fracture toughness and Charpy impact testing indicated an improved transition temperature closer to that of the base material properties.

  19. Impact of ASTM Standard E722 update on radiation damage metrics.

    SciTech Connect (OSTI)

    DePriest, Kendall Russell

    2014-06-01T23:59:59.000Z

    The impact of recent changes to the ASTM Standard E722 is investigated. The methodological changes in the production of the displacement kerma factors for silicon has significant impact for some energy regions of the 1-MeV(Si) equivalent fluence response function. When evaluating the integral over all neutrons energies in various spectra important to the SNL electronics testing community, the change in the response results in an increase in the total 1-MeV(Si) equivalent fluence of 2 7%. Response functions have been produced and are available for users of both the NuGET and MCNP codes.

  20. Uptakes of Cs and Sr on San Joaquin soil measured following ASTM method C1733.

    SciTech Connect (OSTI)

    Ebert, W.L.; Petri, E.T. (Chemical Sciences and Engineering Division)

    2012-04-04T23:59:59.000Z

    Series of tests were conducted following ASTM Standard Procedure C1733 to evaluate the repeatability of the test and the effects of several test parameters, including the solution-to-soil mass ratio, test duration, pH, and the concentrations of contaminants in the solution. This standard procedure is recommended for measuring the distribution coefficient (K{sub d}) of a contaminant in a specific soil/groundwater system. One objective of the current tests was to identify experimental conditions that can be used in future interlaboratory studies to determine the reproducibility of the test method. This includes the recommendation of a standard soil, the range of contaminant concentrations and solution matrix, and various test parameters. Quantifying the uncertainty in the distribution coefficient that can be attributed to the test procedure itself allows the differences in measured values to be associated with differences in the natural systems being studied. Tests were conducted to measure the uptake of Cs and Sr dissolved as CsCl and Sr(NO{sub 3}){sub 2} in a dilute NaHCO{sub 3}/SiO{sub 2} solution (representing contaminants in a silicate groundwater) by a NIST standard reference material of San Joaquin soil (SRM 2709a). Tests were run to measure the repeatability of the method and the sensitivity of the test response to the reaction time, the mass of soil used (at a constant soil-to-solution ratio), the solution pH, and the contaminant concentration. All tests were conducted in screw-top Teflon vessels at 30 C in an oven. All solutions were passed through a 0.45-{mu}m pore size cellulose acetate membrane filter and stabilized with nitric acid prior to analysis with inductively-coupled plasma mass spectrometry (ICP-MS). Scoping tests with soil in demineralized water resulted in a solution pH of about 8.0 and the release of small amounts of Sr from the soil. Solutions were made with targeted concentrations of 1 x 10{sup -6} m, 1 x 10{sup -5} m, 2.5 x 10{sup -5} m, 5 x 10{sup -5} m, 1 x 10{sup -4} m, and 5 x 10{sup -4} m to measure the effects of the Cs and Sr concentrations on their uptake by the soil. The pH values of all solutions were adjusted to about pH 8.5 so that the effects of pH and concentration could be measured separately. The 1 x 10{sup -4} m solutions were used to measure the repeatability of the test and the effects of duration, scale, and imposed pH on the test response.

  1. Development of ASTM standards in support of advanced ceramics -- continuing efforts

    SciTech Connect (OSTI)

    Brinkman, C.R.

    1998-02-01T23:59:59.000Z

    An update is presented of the activities of the American Society for Testing and Materials (ASTM) Committee C-28 on Advanced Ceramics. Since its inception in 1986, this committee, which has five standard producing subcommittees, has written and published over 32 consensus standards. These standards are concerned with mechanical testing of monolithic and composite ceramics, nondestructive examination, statistical analysis and design, powder characterization, quantitative microscopy, fractography, and terminology. These standards ensure optimum material behavior with physical and mechanical property reproducibility, component reliability, and well-defined methods of data treatment and material analysis for both monolithic and composite materials. Committee C-28 continues to sponsor technical symposia and to cooperate in the development of international standards. An update of recent and current activities as well as possible new areas of standardization work will be presented.

  2. Heat treatment temperature influence on ASTM A890 GR 6A super duplex stainless steel microstructure

    SciTech Connect (OSTI)

    Martins, Marcelo [SULZER BRASIL S/A - FUNDINOX DIVISION (Brazil); Centro Universitario Salesiano de Sao Paulo (Brazil); E-mail: marcelo.martins@sulzer.com; Casteletti, Luiz Carlos [Materials, Aeronautics and Automobiles Engineering Department at the Sao Carlos Engineering School of the Sao Paulo University (USP) (Brazil)

    2005-09-15T23:59:59.000Z

    Duplex and super duplex stainless steels are ferrous alloys with up to 26% chromium, 8% nickel, 5% molybdenum and 0.3% nitrogen, which are largely used in applications in media containing ions from the halogen family, mainly the chloride ion (Cl{sup -}). The emergence of this material aimed at substituting Copper-Nickel alloys (Cupro-Nickel) that despite presenting good corrosion resistance, has mechanical properties quite inferior to steel properties. The metallurgy of duplex and super duplex stainless steel is complex due to high sensitiveness to sigma phase precipitation that becomes apparent, due to the temperatures they are exposed on cooling from solidification as well as from heat treatment processes. The objective of this study was to verify the influence of heat treating temperatures on the microstructure and hardness of ASTM A890/A890M Gr 6A super duplex stainless steel type. Microstructure control is of extreme importance for castings, as the chemical composition and cooling during solidification inevitably provide conditions for precipitation of sigma phase. Higher hardness in these materials is directly associated to high sigma phase concentration in the microstructure, precipitated in the ferrite/austenite interface. While heat treatment temperature during solution treatment increases, the sigma phase content in the microstructure decreases and consequently, the material hardness diminishes. When the sigma phase was completely dissolved by the heat treatment, the material hardness was influenced only due to ferrite and austenite contents in the microstructure.

  3. Comparison of analytical methods for percent phosphorous determination in electroless nickel plate. [UCC-ND alkalimetric method; UCC-ND Inductively Coupled Plasma (ICP) method; ASTM-E39 gravimetric method; development colorimetric method; independent colorimetric method

    SciTech Connect (OSTI)

    Owens, W.W.; Sullivan, H.H.

    1982-01-01T23:59:59.000Z

    Electroless nicke-plate characteristics are substantially influenced by percent phosphorous concentrations. Available ASTM analytical methods are designed for phosphorous concentrations of less than one percent compared to the 4.0 to 20.0% concentrations common in electroless nickel plate. A variety of analytical adaptations are applied through the industry resulting in poor data continuity. This paper presents a statistical comparison of five analytical methods and recommends accurate and precise procedures for use in percent phosphorous determinations in electroless nickel plate. 2 figures, 1 table.

  4. Porterfield named ASTM Fellow

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeeding accessPeptoidLabPhysicsPits |RegulationsPortable MRI

  5. Final Report, Volume 5, Data Package for ASTM A923 Supporting Inclusion of A890-5 Super Duplex Stainless Steel (Cast Equivalent of 2507)

    SciTech Connect (OSTI)

    Hariharan, Vasudevan; Lundin, Carl, W.

    2005-09-30T23:59:59.000Z

    Volume 5 is the Data Package for the evaluation of Super Duplex Stainless Steel Castings prepared at the end of work comprised in volumes 3 and 4. The document deals with the various evaluation methods used in the work documented in volume 3 and 4. This document covers materials regarding evaluation of the A890-5A material in terms of inclusion in ASTM A923. The various tests which were conducted on the A890-5A material are included in this document.

  6. Final Report, Volume 5, Data Package for ASTM A923 Supporting Inclusion of A890-5A Super Duplex Stainless Steel ( Cast Equivalent of 2507)

    SciTech Connect (OSTI)

    Hariharan, Vasudevan; Lundin, Carl, D.

    2005-09-30T23:59:59.000Z

    Volume 5 is the Data Package for the evaluation of Super Duplex Stainless Steel Castings prepared at the end of work comprised in volumes 3 and 4. The document deals with the various evaluation methods used in the work documented in volume 3 and 4. This document covers materials regarding evaluation of the A890-5A material in terms of inclusion in ASTM A923. The various tests which were conducted on the A890-5A material are included in this document.

  7. Commissioning Specifications

    Broader source: Energy.gov [DOE]

    Commissioning specifications outline basic requirements of the commissioning process and detail the roles and responsibilities of each party involved. System checklists, startup requirements, and...

  8. Heating System Specification Specification of Heating System

    E-Print Network [OSTI]

    Day, Nancy

    Appendix A Heating System Specification /* Specification of Heating System (loosely based */ requestHeat : Room ­? bool; 306 #12; APPENDIX A. HEATING SYSTEM SPECIFICATION 307 /* user inputs */ livingPattern : Room ­? behaviour; setTemp : Room ­? num; heatSwitchOn, heatSwitchOff, userReset : simple

  9. Specific Learning Difficulties

    E-Print Network [OSTI]

    Anderson, Jim

    Dyslexia and other Specific Learning Difficulties (SpLDs) A guide for tutors Enabling Services Supporting you to succeed #12;2 Contents Dyslexia Support ............................................................................................................ 3 Recognising students with dyslexia or other specific learning difficulties................. 4

  10. ASTM A-710 GRADE B High Performance

    E-Print Network [OSTI]

    Carbon Equivalent 70 ksi Grade Low Temperature Tough Improved Weldability Improved Weatherability Life Properties Corrosion Welding Selected Publications Contact 3 4 5 6 7, 8 7 9 9 DISCLAIMER Front Cover: Bridge) Steel Beams used in the construction of the Lake Villa Bridge Page 10: Semi-automatic welding of NUCu 70

  11. Specific Group Hardware

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Group Hardware Specific Group Hardware ALICE palicevo1 The Virtual Organization (VO) server. Serves as gatekeeper for ALICE jobs. It's duties include getting assignments from...

  12. Legacy Management Specific Training

    Broader source: Energy.gov [DOE]

    The following courses are specific to Legacy Management Employees, for more information about the courses below or to register for any of these courses please contact Chequita Johnson.

  13. Specific light in sculpture

    E-Print Network [OSTI]

    Powell, John William

    1989-01-01T23:59:59.000Z

    Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

  14. Redesigning specificity in miniproteins

    E-Print Network [OSTI]

    Taylor, Christina Marie

    2006-01-01T23:59:59.000Z

    This work focuses on designing specific miniprotein interactions using computational models and then testing these designs with experiments. Miniproteins are small, autonomously-folding proteins that are excellent for ...

  15. Extraction Utility Design Specification

    Energy Savers [EERE]

    Extraction Utility Design Specification January 11, 2011 Document Version 1.9 1 Revision History Date Version Section and Titles Author Summary of Change January 15, 2010 1.0 All...

  16. Harmonization of Biodiesel Specifications

    SciTech Connect (OSTI)

    Alleman, T. L.

    2008-02-01T23:59:59.000Z

    Worldwide biodiesel production has grown dramatically over the last several years. Biodiesel standards vary across countries and regions, and there is a call for harmonization. For harmonization to become a reality, standards have to be adapted to cover all feedstocks. Additionally, all feedstocks cannot meet all specifications, so harmonization will require standards to either tighten or relax. For harmonization to succeed, the biodiesel market must be expanded with the alignment of test methods and specification limits, not contracted.

  17. IDC System Specification Document.

    SciTech Connect (OSTI)

    Clifford, David J.

    2014-12-01T23:59:59.000Z

    This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris

  18. Changing fuel specifications

    SciTech Connect (OSTI)

    Hatt, R.

    1995-08-01T23:59:59.000Z

    This paper will describe the goals, methods, and results of a program designed to expand fuel specifications. The ability to expand fuel specs can provide many advantages to a power company. These would include increased fuel flexibility, better performance and lower fuel cost. The expansion of transportation modes also may enhance the scenario. Although brief, this paper should provide a good understanding of the types of problems that can be encountered, and the cooperative effort necessary to resolve them.

  19. Oak Ridge Site Specific

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently Asked QuestionsDepartment ofDepartment640OrderOREMJanuary 20149Oak RidgeSite Specific

  20. Specific Group Hardware

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebookScholarship Fund3Biology|SolarSpeakers BureauSpecialSpecific Group

  1. Cylinder Test Specification

    SciTech Connect (OSTI)

    Richard Catanach; Larry Hill; Herbert Harry; Ernest Aragon; Don Murk

    1999-10-01T23:59:59.000Z

    The purpose of the cylinder testis two-fold: (1) to characterize the metal-pushing ability of an explosive relative to that of other explosives as evaluated by the E{sub 19} cylinder energy and the G{sub 19} Gurney energy and (2) to help establish the explosive product equation-of-state (historically, the Jones-Wilkins-Lee (JWL) equation). This specification details the material requirements and procedures necessary to assemble and fire a typical Los Alamos National Laboratory (LANL) cylinder test. Strict adherence to the cylinder. material properties, machining tolerances, material heat-treatment and etching processes, and high explosive machining tolerances is essential for test-to-test consistency and to maximize radial wall expansions. Assembly and setup of the cylinder test require precise attention to detail, especially when placing intricate pin wires on the cylinder wall. The cylinder test is typically fired outdoors and at ambient temperature.

  2. Specification No. 203-HJT-9004 R0 Specification for the

    E-Print Network [OSTI]

    McDonald, Kirk

    Specification No. 203-HJT-9004 R0 Specification for the MERIT Mercury-Jet Experiment Titanium TITANIUM TARGET MODULE COMPONENTS Prepared by: V.B. Graves (Oak Ridge National Laboratory) P. T. Spampinato.S. DEPARTMENT OF ENERGY April 10, 2006 #12;Specification for Ti Alloy Components MERIT High Power Mercury

  3. General Vehicle Performance Specifications for the UPRM AUV Vehicle Specifications

    E-Print Network [OSTI]

    Gilbes, Fernando

    General Vehicle Performance Specifications for the UPRM AUV Vehicle Specifications Vehicle Characteristics Specification Maximum Depth 700m with 1.5 safety factor Vehicle power 2kWHr Li Ion Rechargeable Transducer 700m rated Paroscientific Depth Sensor will be integrated into the vehicle navigation stream

  4. Renewable Fuel Heating Plant SyStem SpecificationS

    E-Print Network [OSTI]

    Renewable Fuel Heating Plant SyStem SpecificationS Manufacturer: Advanced Recycling Equipment efficiency of natural gas combustion) The facility is designed to meet additional future heating loads, so annual output will increase when the Research Support Facility comes online What it will heat

  5. Specification No. 203-HJT-9004 R1 Specification for the

    E-Print Network [OSTI]

    McDonald, Kirk

    .S. DEPARTMENT OF ENERGY April 10, 2006 #12;Specification for Titanium Components MERIT High Power Mercury Titanium Components August 14, 2006 #12;Specification for Titanium Components MERIT High Power Mercury MODULE TITANIUM COMPONENTS Prepared by: V.B. Graves (Oak Ridge National Laboratory) P. T. Spampinato (Oak

  6. Mesa Top Photovoltaic Array SyStem SpecificationS

    E-Print Network [OSTI]

    Mesa Top Photovoltaic Array SyStem SpecificationS System size: 750 kW (DC, estimated) Characteristics: Single axis tracker photovoltaics, ground mounted Annual output: 1,200 MWh Location: Top of South Table Mountain; NREL Campus; Golden, Colorado Start of operation: Spring 2008 financial terms System

  7. DOCUMENTATION SPECIFIC TASK TRAINING PROGRAM

    E-Print Network [OSTI]

    Illinois at Urbana-Champaign, University of

    DOCUMENTATION APPENDIX SPECIFIC TASK TRAINING PROGRAM Conducted by the ILLINOIS CENTER ............................................................. Coordination of Contract Documents Art.105.05 Appendix Page 14

  8. Hanford Site environmental management specification

    SciTech Connect (OSTI)

    Grygiel, M.L.

    1998-06-10T23:59:59.000Z

    The US Department of Energy, Richland Operations Office (RL) uses this Hanford Site Environmental Management Specification (Specification) to document top-level mission requirements and planning assumptions for the prime contractors involved in Hanford Site cleanup and infrastructure activities under the responsibility of the US Department of Energy, Office of Environmental Management. This Specification describes at a top level the activities, facilities, and infrastructure necessary to accomplish the cleanup of the Hanford Site and assigns this scope to Site contractors and their respective projects. This Specification also references the key National Environmental Policy Act of 1969 (NEPA), Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA), and safety documentation necessary to accurately describe the cleanup at a summary level. The information contained in this document reflects RL`s application of values, priorities, and critical success factors expressed by those involved with and affected by the Hanford Site project. The prime contractors and their projects develop complete baselines and work plans to implement this Specification. These lower-level documents and the data that support them, together with this Specification, represent the full set of requirements applicable to the contractors and their projects. Figure 1-1 shows the relationship of this Specification to the other basic Site documents. Similarly, the documents, orders, and laws referenced in this specification represent only the most salient sources of requirements. Current and contractual reference data contain a complete set of source documents.

  9. Cell Data Sheet Specification (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.

    2012-03-01T23:59:59.000Z

    The presentation shows a brief status report on the development of a specification being considered by IEC TC82 WG7 for a concentrator cell data sheet and solicits suggestions from the community.

  10. Oak Ridge Site Specific Advisory ...

    Office of Environmental Management (EM)

    Ridge Site Specific Advisory Board * P.O. Box 2001, EM-91, Oak Ridge, TN 37831 Phone: 865-241-4583, 865-241-4584, 1-800-382-6938 * Fax: 865-574-3521 * Internet:...

  11. Building Energy Data Exchange Specification Scoping Report |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Energy Data Exchange Specification Scoping Report Building Energy Data Exchange Specification Scoping Report The Building Energy Data Exchange Specification (BEDES),...

  12. ALTERNATE ACCEPTANCE OF WULFENSTEIN PIT AGGREGATE

    SciTech Connect (OSTI)

    J. W. Keifer

    1999-06-24T23:59:59.000Z

    The purpose of this calculation is to evaluate Wulfenstein fine aggregate for acceptability under ASTM C 33 standard specification.

  13. Investigating Commercial Cellulase Performances Toward Specific...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commercial Cellulase Performances Toward Specific Biomass Recalcitrance Factors Using Reference Substrates. Investigating Commercial Cellulase Performances Toward Specific Biomass...

  14. Gas Slow Control System Specifications

    E-Print Network [OSTI]

    Roma "La Sapienza", Università di

    AMS-02 TRD Gas Slow Control System Specifications v 4.2 26-06-2006 A. Bartoloni, B. Borgia, F. Bucci, F. R. Spada INFN Sezione di Roma 1- Roma, Italy #12;2/45 #12;3/45 1. ABSTRACT 5 2. GAS SYSTEM FUNCTIONAL DESCRIPTION 5 3. GAS CONTROL SYSTEM 8 4. CONTROL SYSTEM COMPONENTS 12 a. Universal Control System

  15. Programme Specification 1. General Information

    E-Print Network [OSTI]

    Subramanian, Sriram

    , administrative and practical skills required in exhibition making. Able to: C. Professionalism C1. Take Institution Royal College of Art Professional Accreditation N/A Qualifications Framework Level 7 Credit Value as competent and #12;Programme Specification 2/10 responsible professionals, equipped with the knowledge

  16. Temporal Specifications with Accumulative Values

    E-Print Network [OSTI]

    Boker, Udi

    Temporal Specifications with Accumulative Values Udi Boker, Krishnendu Chatterjee, Thomas A the accumulation of values along a computation. It is either the accumulated summation, as with the energy objectives, or the accumulated average, as with the mean-payoff objectives. We investigate the extension

  17. ProductSpecifications Thermo Scientific

    E-Print Network [OSTI]

    Peraire, Jaime

    ProductSpecifications Thermo Scientific CellomicsArrayScan VTI HCS Reader The Thermo Scientific info.cellularimaging@thermofisher.com www.thermo.com/cellomics and Cellular Imaging Europe: +44 118 988 and filters available Integrated Software Features · Thermo Scientific Cellomics iQ - High Content intelligent

  18. CHEMICAL HYGIENE LAB SPECIFIC INFORMATION

    E-Print Network [OSTI]

    Bigelow, Stephen

    1 CHEMICAL HYGIENE PLAN (CHP) LAB SPECIFIC INFORMATION & STANDARD OPERATING PROCEDURES (SOPs____________________19 #12;3 Introduction 12/4/2013 This is the Chemical Hygiene Plan (CHP) for the Materials Research University of California at Santa Barbara Spectroscopy Department Chemical Hygiene Plan NMR and EPR

  19. CHEMICAL HYGIENE LAB SPECIFIC INFORMATION

    E-Print Network [OSTI]

    Sideris, Thomas C.

    1 CHEMICAL HYGIENE PLAN (CHP) LAB SPECIFIC INFORMATION & STANDARD OPERATING PROCEDURES (SOPs____________________19 #12;3 Introduction 12/4/2013 This is the Chemical Hygiene Plan (CHP) for the Materials Research Hygiene Plan NMR and EPR Laboratory Form Version 8/6/98 1. General Laboratory Information Laboratory Name

  20. CHEMICAL HYGIENE LAB SPECIFIC INFORMATION

    E-Print Network [OSTI]

    Bigelow, Stephen

    1 CHEMICAL HYGIENE PLAN (CHP) LAB SPECIFIC INFORMATION & STANDARD OPERATING PROCEDURES (SOPs______________________19 #12;3 Introduction 10/23/09 This is the Chemical Hygiene Plan (CHP) for the Materials Research Department Chemical Hygiene Plan NMR Laboratory Form Version 8/6/98 1. General Laboratory Information

  1. ProductSpecifications Thermo Scientific

    E-Print Network [OSTI]

    Short, Daniel

    ProductSpecifications Thermo Scientific Niton XL3t GOLDD+ XRF Analyzer The Thermo Scientific Niton XL3t x-ray tube-based x-ray fluorescence (XRF) analyzer with GOLDD+ technology is purpose versatile x-ray tubes ever used in a handheld XRF instrument. When this power is harnessed to our

  2. astm international symposium: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ON THE BIOGEOCHEMISTRY OF WETLANDS BOOK OF ABSTRACTS Duke 5 seventh international cough symposium CiteSeer Summary: Twenty six papers were presented as posters in the Seventh...

  3. acero refractario astm: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    University of 93 MECHANICAL PROPERTIES OF HIGH-PERFORMANCE CLASS C FLY ASH CONCRETE SYSTEMS Materials Science Websites Summary: properties of concrete. Experimental Program...

  4. astm f138 nitretado: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    University of 86 MECHANICAL PROPERTIES OF HIGH-PERFORMANCE CLASS C FLY ASH CONCRETE SYSTEMS Materials Science Websites Summary: properties of concrete. Experimental Program...

  5. astm graphite oxidation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OF THE BNL, in the first phase of the E951 experiment, graphite and carbon-carbon composite targets were exposed to the AGS materials selected for the experiment are ATJ...

  6. astm committee e-6: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    presence of a Z' and exotic particles predicted by E6SSM allows the lightest Higgs boson to be significantly heavier than in the MSSM and NMSSM. Other possible...

  7. astm standard guide: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    methods for the physical conduct of specimen tests and for raw data acquisition. American Society for Testing and Materials. Philadelphia 2010-01-01 29 Stanford Laboratory Standard...

  8. astm committee d-19: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Engineering C. Formal Investigation Committee D. Search Committee, Dean of the School of Physical Sciences E for Review and Search Committees COC was asked to nominate...

  9. astm committee e-35: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Engineering C. Formal Investigation Committee D. Search Committee, Dean of the School of Physical Sciences E for Review and Search Committees COC was asked to nominate...

  10. astm committee d-2: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Engineering C. Formal Investigation Committee D. Search Committee, Dean of the School of Physical Sciences E for Review and Search Committees COC was asked to nominate...

  11. astm committees e-9: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Engineering C. Formal Investigation Committee D. Search Committee, Dean of the School of Physical Sciences E for Review and Search Committees COC was asked to nominate...

  12. astm committee e-9: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Engineering C. Formal Investigation Committee D. Search Committee, Dean of the School of Physical Sciences E for Review and Search Committees COC was asked to nominate...

  13. astm committee e-29: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Engineering C. Formal Investigation Committee D. Search Committee, Dean of the School of Physical Sciences E for Review and Search Committees COC was asked to nominate...

  14. astm committee e-24: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Engineering C. Formal Investigation Committee D. Search Committee, Dean of the School of Physical Sciences E for Review and Search Committees COC was asked to nominate...

  15. astm committee e-10: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Engineering C. Formal Investigation Committee D. Search Committee, Dean of the School of Physical Sciences E for Review and Search Committees COC was asked to nominate...

  16. astm committee d-18: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Engineering C. Formal Investigation Committee D. Search Committee, Dean of the School of Physical Sciences E for Review and Search Committees COC was asked to nominate...

  17. astm committee d-30: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Engineering C. Formal Investigation Committee D. Search Committee, Dean of the School of Physical Sciences E for Review and Search Committees COC was asked to nominate...

  18. astm committee b-10: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Engineering C. Formal Investigation Committee D. Search Committee, Dean of the School of Physical Sciences E for Review and Search Committees COC was asked to nominate...

  19. aco astm a-508: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Websites Summary: , GPU) GPU Computation, GPU CPU 10 100 Parallel Ant Colony Optimization for Fast Solving Quadratic ACO cAS, cunning Ant System 22, 32) 2 GPU GPU 3 cAS QAP...

  20. Biodiesel ASTM Update and Future Technical Needs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The FutureCommentsEnergyand SustainedBio-Oil Deployment in the 2015

  1. automotive lubricants astm: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in cartilaginous joints. J. M. Skotheim; L. Mahadevan 2004-04-04 3 COASTAL HOUSEHOLD AIR TRAVEL SPORTS & RECREATION MANUFACTURING AUTOMOTIVE PUBLIC SAFETY MEDICAL...

  2. Microsoft PowerPoint - AAVP.ASTM.Monterey..ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighand Retrievals fromprocess usedGELustre FileBimodal ParticleARM Science

  3. Frit specification development: Letter report

    SciTech Connect (OSTI)

    Smith, P.A.; Hrma, P.R.; Vienna, J.D.; Fini, P.T.

    1996-03-01T23:59:59.000Z

    To specify frit for the Hanford Waste Vitrification Plant (HWVP), the relevant requirements and characterization need to be established. The properties and applicable testing will be incorporated into a specification. Several areas have been identified that require consideration in a frit specification: glass processability and acceptability; frit storage and handling; frit slurry rheology; melter feed rheology; canister decontamination; pumping equipment/pipe erosion; frit cooling rate; and glass melting rate. The listed areas are influenced primarily by frit composition, temperature history, particle morphology, particle size, size distribution. and properties that depend on the primary variables such as hardness and frit density. Frit development proceeds in two steps: the first focuses on the waste glass, and the second on the pre-melt (including cold cap) processing.

  4. Chromosome specific repetitive DNA sequences

    DOE Patents [OSTI]

    Moyzis, Robert K. (Los Alamos, NM); Meyne, Julianne (Los Alamos, NM)

    1991-01-01T23:59:59.000Z

    A method is provided for determining specific nucleotide sequences useful in forming a probe which can identify specific chromosomes, preferably through in situ hybridization within the cell itself. In one embodiment, chromosome preferential nucleotide sequences are first determined from a library of recombinant DNA clones having families of repetitive sequences. Library clones are identified with a low homology with a sequence of repetitive DNA families to which the first clones respectively belong and variant sequences are then identified by selecting clones having a pattern of hybridization with genomic DNA dissimilar to the hybridization pattern shown by the respective families. In another embodiment, variant sequences are selected from a sequence of a known repetitive DNA family. The selected variant sequence is classified as chromosome specific, chromosome preferential, or chromosome nonspecific. Sequences which are classified as chromosome preferential are further sequenced and regions are identified having a low homology with other regions of the chromosome preferential sequence or with known sequences of other family me This invention is the result of a contract with the Department of Energy (Contract No. W-7405-ENG-36).

  5. Project X functional requirements specification

    SciTech Connect (OSTI)

    Holmes, S.D.; Henderson, S.D.; Kephart, R.; Kerby, J.; Kourbanis, I.; Lebedev, V.; Mishra, S.; Nagaitsev, S.; Solyak, N.; Tschirhart, R.; /Fermilab

    2012-05-01T23:59:59.000Z

    Project X is a multi-megawatt proton facility being developed to support a world-leading program in Intensity Frontier physics at Fermilab. The facility is designed to support programs in elementary particle and nuclear physics, with possible applications to nuclear energy research. A Functional Requirements Specification has been developed in order to establish performance criteria for the Project X complex in support of these multiple missions, and to assure that the facility is designed with sufficient upgrade capability to provide U.S. leadership for many decades to come. This paper will briefly review the previously described Functional Requirements, and then discuss their recent evolution.

  6. Central Solenoid Insert Technical Specification

    SciTech Connect (OSTI)

    Martovetsky, Nicolai N [ORNL; Smirnov, Alexandre [ORNL

    2011-09-01T23:59:59.000Z

    The US ITER Project Office (USIPO) is responsible for the ITER central solenoid (CS) contribution to the ITER project. The Central Solenoid Insert (CSI) project will allow ITER validation the appropriate lengths of the conductors to be used in the full-scale CS coils under relevant conditions. The ITER Program plans to build and test a CSI to verify the performance of the CS conductor. The CSI is a one-layer solenoid with an inner diameter of 1.48 m and a height of 4.45 m between electric terminal ends. The coil weight with the terminals is approximately 820 kg without insulation. The major goal of the CSI is to measure the temperature margin of the CS under the ITER direct current (DC) operating conditions, including determining sensitivity to load cycles. Performance of the joints, ramp rate sensitivity, and stability against thermal or electromagnetic disturbances, electrical insulation, losses, and instrumentation are addressed separately and therefore are not major goals in this project. However, losses and joint performance will be tested during the CSI testing campaign. The USIPO will build the CSI that will be tested at the Central Solenoid Model Coil (CSMC) Test Facility at the Japan Atomic Energy Agency (JAEA), Naka, Japan. The industrial vendors (the Suppliers) will report to the USIPO (the Company). All approvals to proceed will be issued by the Company, which in some cases, as specified in this document, will also require the approval of the ITER Organization. Responsibilities and obligations will be covered by respective contracts between the USIPO, called Company interchangeably, and the industrial Prime Contractors, called Suppliers. Different stages of work may be performed by more than one Prime Contractor, as described in this specification. Technical requirements of the contract between the Company and the Prime Contractor will be covered by the Fabrication Specifications developed by the Prime Contractor based on this document and approved by the Company and ITER. The Fabrication Specifications may reflect some national requirements and regulations that are not fully provided here. This document presents the ITER CSI specifications.

  7. High specific activity silicon-32

    DOE Patents [OSTI]

    Phillips, D.R.; Brzezinski, M.A.

    1996-06-11T23:59:59.000Z

    A process for preparation of silicon-32 is provided and includes contacting an irradiated potassium chloride target, including spallation products from a prior irradiation, with sufficient water, hydrochloric acid or potassium hydroxide to form a solution, filtering the solution, adjusting pH of the solution from about 5.5 to about 7.5, admixing sufficient molybdate-reagent to the solution to adjust the pH of the solution to about 1.5 and to form a silicon-molybdate complex, contacting the solution including the silicon-molybdate complex with a dextran-based material, washing the dextran-based material to remove residual contaminants such as sodium-22, separating the silicon-molybdate complex from the dextran-based material as another solution, adding sufficient hydrochloric acid and hydrogen peroxide to the solution to prevent reformation of the silicon-molybdate complex and to yield an oxidation state of the molybdate adapted for subsequent separation by an anion exchange material, contacting the solution with an anion exchange material whereby the molybdate is retained by the anion exchange material and the silicon remains in solution, and optionally adding sufficient alkali metal hydroxide to adjust the pH of the solution to about 12 to 13. Additionally, a high specific activity silicon-32 product having a high purity is provided.

  8. High specific activity silicon-32

    DOE Patents [OSTI]

    Phillips, Dennis R. (Los Alamos, NM); Brzezinski, Mark A. (Santa Barbara, CA)

    1996-01-01T23:59:59.000Z

    A process for preparation of silicon-32 is provided and includes contacting an irradiated potassium chloride target, including spallation products from a prior irradiation, with sufficient water, hydrochloric acid or potassium hydroxide to form a solution, filtering the solution, adjusting pH of the solution to from about 5.5 to about 7.5, admixing sufficient molybdate-reagent to the solution to adjust the pH of the solution to about 1.5 and to form a silicon-molybdate complex, contacting the solution including the silicon-molybdate complex with a dextran-based material, washing the dextran-based material to remove residual contaminants such as sodium-22, separating the silicon-molybdate complex from the dextran-based material as another solution, adding sufficient hydrochloric acid and hydrogen peroxide to the solution to prevent reformation of the silicon-molybdate complex and to yield an oxidization state of the molybdate adapted for subsequent separation by an anion exchange material, contacting the solution with an anion exchange material whereby the molybdate is retained by the anion exchange material and the silicon remains in solution, and optionally adding sufficient alkali metal hydroxide to adjust the pH of the solution to about 12 to 13. Additionally, a high specific activity silicon-32 product having a high purity is provided.

  9. Model Commissioning Plan and Guide Specifications

    SciTech Connect (OSTI)

    NONE

    1997-03-01T23:59:59.000Z

    The objectives of Model Commissioning Plan and Guide Specifications are to ensure that the design team applies commissioning concepts to the design and prepares commissioning specifications and a commission plan for inclusion in the bid construction documents.

  10. Graceful Degradation Via Versions: Specifications and Implementations

    E-Print Network [OSTI]

    Thekkath, Chandramohan A.

    Graceful Degradation Via Versions: Specifications and Implementations Lidong Zhou, Vijayan to degraded system behavior that deviates from the system's specification and even causing complete unavailability of the system. This paper advocates the notion of graceful degradation as a complementary

  11. Runtime verification of object lifetime specifications

    E-Print Network [OSTI]

    Benjamin, Zev (Zev A.)

    2009-01-01T23:59:59.000Z

    This thesis reports on the implementation of a runtime verification system for object lifetime specifications. This system is used to explore and evaluate the expressiveness object lifetime specifications. Object lifetime ...

  12. Methods for chromosome-specific staining

    DOE Patents [OSTI]

    Gray, Joe W. (Livermore, CA); Pinkel, Daniel (Walnut Creek, CA)

    1995-01-01T23:59:59.000Z

    Methods and compositions for chromosome-specific staining are provided. Compositions comprise heterogenous mixtures of labeled nucleic acid fragments having substantially complementary base sequences to unique sequence regions of the chromosomal DNA for which their associated staining reagent is specific. Methods include methods for making the chromosome-specific staining compositions of the invention, and methods for applying the staining compositions to chromosomes.

  13. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Biodiesel Specifications Biodiesel produced or sold in the state, including for the purpose of blending with petroleum diesel, must meet ASTM specification D6751. (Reference...

  14. Ergonomic Chair Specifications These specifications are intended to address most employees. Employees that have

    E-Print Network [OSTI]

    de Lijser, Peter

    Ergonomic Chair Specifications These specifications are intended to address most employees should consult Environmental Health & Safety if they require a special ergonomic chair. a. Any chair must

  15. Breckinridge Project, initial effort. Report III, Volume 2. Specifications

    SciTech Connect (OSTI)

    none,

    1982-01-01T23:59:59.000Z

    Report III, Volume 2 contains those specifications numbered K through Y, as follows: Specifications for Compressors (K); Specifications for Piping (L); Specifications for Structures (M); Specifications for Insulation (N); Specifications for Electrical (P); Specifications for Concrete (Q); Specifications for Civil (S); Specifications for Welding (W); Specifications for Painting (X); and Specifications for Special (Y). The standard specifications of Bechtel Petroleum Incorporated have been amended as necessary to reflect the specific requirements of the Breckinridge Project and the more stringent specifications of Ashland Synthetic Fuels, Inc. These standard specifications are available for the Initial Effort (Phase Zero) work performed by all contractors and subcontractors.

  16. Specification No. 203-HJT-9000R0 Procurement Specification for a Pump

    E-Print Network [OSTI]

    McDonald, Kirk

    Specification No. 203-HJT-9000R0 Procurement Specification for a Pump System for the High Power Mercury- Jet Target Experiment August 2005 #12;Draft Specification for Syringe Pump System High Power Mercury Target Experiment 203-HJT-9000R0 8/10/05 Draft Draftii SPECIFICATION FOR A PUMP SYSTEM

  17. Specification No. 203-HJT-9000R09000R1a Specification for a Pump System for

    E-Print Network [OSTI]

    McDonald, Kirk

    Specification No. 203-HJT-9000R09000R1a Specification for a Pump System for the High Power Mercury-Jet Target Experiment August 24Nov 1, 2005 #12;Specification for Syringe Pump System High Power Mercury Target Experiment 203-HJT-9000R09000R1a ii SPECIFICATION FOR A PUMP SYSTEM FOR THE HIGH POWER MERCURY

  18. Municipal Consortium Releases Updated Model Specification for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to reflect changes in technologies and associated standards, and to incorporate feedback from users, the model specification enables cities, utilities, and other local...

  19. Renewable Energy Ready Home Solar Photovoltaic Specifications...

    Broader source: Energy.gov (indexed) [DOE]

    Solar Photovoltaic Specification, Checklist and Guide, from the U.S. Environmental Protection Agency. rerhsolarelectricguide.pdf More Documents & Publications Solar Water...

  20. Renewable Energy Specifications, Testing and Certification Terms...

    Open Energy Info (EERE)

    Terms of Reference Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy Specifications, Testing and Certification Terms of Reference Agency...

  1. Static Consistency Checking for Distributed Specifications

    E-Print Network [OSTI]

    Finkelstein, Anthony

    Static Consistency Checking for Distributed Specifications Christian Nentwich, Wolfgang Emmerich, UK {c.nentwich,w.emmerich,a.finkelstein}@cs.ucl.ac.uk Abstract Software engineers building a complex

  2. Electrostatic Potential of Specific Mineral Faces. | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    interactions, and in testing surface complexation theories. Citation: Zarzycki PP, SME Chatman, T Preocanin, and KM Rosso.2011."Electrostatic Potential of Specific Mineral...

  3. Formal Specification and Verification of Concurrent

    E-Print Network [OSTI]

    Berry, Daniel M.

    Formal Specification and Verification of Concurrent ProgramsCurriculum Module SEI-CM-27-1.0 #12;Formal Specification and Verification of Concurrent Programs SEI Curriculum Module SEI-CM-27-1.0 February 1993 Daniel M. Berry Technion and Software Engineering Institute Software Engineering Institute

  4. Summary of beryllium specifications, current and historical

    SciTech Connect (OSTI)

    Abeln, S.P.; Kyed, P.

    1990-12-28T23:59:59.000Z

    This report summarizes beryllium properties included in producer, Department of Energy, and government specifications. The specifications are divided into two major categories: current and historical. Within each category the data are arranged primarily according to increasing purity and secondarily by increasing tensile properties. Qualitative comments on formability and weldability are included. Also, short summaries of powder production and consolidation techniques are provided.

  5. Plutonium Immobilization Can Loading Preliminary Specifications

    SciTech Connect (OSTI)

    Kriikku, E.

    1998-11-25T23:59:59.000Z

    This report discusses the Plutonium Immobilization can loading preliminary equipment specifications and includes a process block diagram, process description, equipment list, preliminary equipment specifications, plan and elevation sketches, and some commercial catalogs. This report identifies loading pucks into cans and backfilling cans with helium as the top priority can loading development areas.

  6. Working Copy Specification E-I-474

    E-Print Network [OSTI]

    Working Copy Specification E-I-474 Revision Number 0 Revision Date 07/30/07 ECO Number 11818.7 Packaging and Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.8 Final #12;Working Copy E-I-474, Rev. 0 SPECIFICATION E-X-XXX RECORD OF REVISION ECO/REV NUMBER DATE PAGES

  7. Improvements to Technical Specifications surveillance requirements

    SciTech Connect (OSTI)

    Lobel, R.; Tjader, T.R.

    1992-12-01T23:59:59.000Z

    In August 1983 an NRC task group was formed to investigate problems with surveillance testing required by Technical Specifications, and to recommend approaches to effect improvements. NUREG-1024 ( Technical Specifications-Enhancing Safety Impact'') resulted, and it contained recommendations to review the basis for test frequencies; to ensure that the tests promote safety and do not degrade equipment; and to review surveillance tests so that they do not unnecessarily burden personnel. The Technical Specifications Improvement Program (TSIP) was established in December 1984 to provide the framework for rewriting and improving the Technical Specifications. As an element of the TSIP, all Technical Specifications surveillance requirements were comprehensively examined as recommended in NUREG-1024. The results of that effort are presented in this report. The study found that while some testing at power is essential to verify equipment and system operability, safety can be improved, equipment degradation decreased, and unnecessary personnel burden relaxed by reducing the amount of testing at power.

  8. Stepwise Development from Ideal Specifications Graeme Smith

    E-Print Network [OSTI]

    Smith, Graeme

    Stepwise Development from Ideal Specifications Graeme Smith Software Verification Research Centre University of Queensland, Australia smith@svrc.uq.edu.au Abstract The stepwise development of a program using

  9. Technical requirements specification for tank waste retrieval

    SciTech Connect (OSTI)

    Lamberd, D.L.

    1996-09-26T23:59:59.000Z

    This document provides the technical requirements specification for the retrieval of waste from the underground storage tanks at the Hanford Site. All activities covered by this scope are conducted in support of the Tank Waste Remediation System (TWRS) mission.

  10. BRASIL Language Specification March 9, 2010

    E-Print Network [OSTI]

    BRASIL Language Specification March 9, 2010 #12;Contents 1 Introduction 3 2 Getting Started: Simulations in BRASIL 4 2.1 The State-Effect Design Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 Supporting the State-Effect Pattern in BRASIL

  11. Double Shell Tank (DST) Utilities Specification

    SciTech Connect (OSTI)

    SUSIENE, W.T.

    2000-04-27T23:59:59.000Z

    This specification establishes the performance requirements and provides the references to the requisite codes and standards to he applied during the design of the Double-Shell Tank (DST) Utilities Subsystems that support the first phase of waste feed delivery (WFD). The DST Utilities Subsystems provide electrical power, raw/potable water, and service/instrument air to the equipment and structures used to transfer low-activity waste (LAW) and high-level waste (HLW) to designated DST staging tanks. The DST Utilities Subsystems also support the equipment and structures used to deliver blended LAW and HLW feed from these staging tanks to the River Protection Project (RPP) Privatization Contractor facility where the waste will be immobilized. This specification is intended to be the basis for new projects/installations. This specification is not intended to retroactively affect previously established project design criteria without specific direction by the program.

  12. Indoor airPLUS Construction Specifications Version 1 (Rev. 02...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Specifications Version 1 (Rev. 02) Indoor airPLUS Construction Specifications Version 1 (Rev. 02) Indoor airPLUS Construction Specifications Version 1 (Rev. 02), November 2013,...

  13. Building America Climate-Specific Guidance | Department of Energy

    Energy Savers [EERE]

    Building America Building America Climate-Specific Guidance Building America Climate-Specific Guidance Building America Climate-Specific Guidance 2014 Housing Innovation...

  14. Engineered waste-package-system design specification

    SciTech Connect (OSTI)

    Not Available

    1983-05-01T23:59:59.000Z

    This report documents the waste package performance requirements and geologic and waste form data bases used in developing the conceptual designs for waste packages for salt, tuff, and basalt geologies. The data base reflects the latest geotechnical information on the geologic media of interest. The parameters or characteristics specified primarily cover spent fuel, defense high-level waste, and commercial high-level waste forms. The specification documents the direction taken during the conceptual design activity. A separate design specification will be developed prior to the start of the preliminary design activity.

  15. Spent Nuclear Fuel (SNF) Project Product Specification

    SciTech Connect (OSTI)

    PAJUNEN, A.L.

    2000-12-07T23:59:59.000Z

    The process for removal of Spent Nuclear Fuel (SNF) from the K Basins has been divided into major sub-systems. The Fuel Retrieval System (FRS) removes fuel from the existing storage canisters, cleans it, and places it into baskets. The multi-canister overpack (MCO) loading system places the baskets into an MCO that has been pre-loaded in a cask. The cask, containing a loaded MCO, is then transferred to the Cold Vacuum Drying (CVD) Facility. After drying at the CVD Facility, the cask, and MCO, are transferred to the Canister Storage Building (CSB), where the MCO is removed from the cask, staged, inspected, sealed (by welding), and stored until a suitable permanent disposal option is implemented. The purpose of this document is to specify the process related characteristics of an MCO at the interface between major process systems. The characteristics are derived from the primary technical documents that form the basis for safety analysis and design calculations. This document translates the calculation assumptions into implementation requirements and describes the method of verifying that the requirement is achieved. These requirements are used to define validation test requirements and describe requirements that influence multiple sub-project safety analysis reports. This product specification establishes limits and controls for each significant process parameter at interfaces between major sub-systems that potentially affect the overall safety and/or quality of the SNF packaged for processing, transport, and interim dry storage. The product specifications in this document cover the SNF packaged in MCOs to be transported throughout the SNF Project. The description of the product specifications are organized in the document as follows: Section 2.0--Summary listing of product specifications at each major sub-system interface. Section 3.0--Summary description providing guidance as to how specifications are complied with by equipment design or processing within a major sub-system. Section 4.0--Specific technical basis description for each product specification. The scope of this product specification does not include data collection requirements to support accountability or environmental compliance activities.

  16. Energy Efficiency Improvement and Cost Saving Oportunities for the Concrete Industry

    E-Print Network [OSTI]

    Kermeli, Katerina

    2013-01-01T23:59:59.000Z

    Testing and Materials (ASTM) C94. Standard Specification for Ready Mixed Concrete.Concrete. West Conshohocken, Pennsylvania. American Society for Testing

  17. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Definition Biodiesel is defined as a renewable, biodegradable fuel derived from agricultural plant oils or animal fats that meet ASTM specification D6751. Blended biodiesel is a...

  18. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Biodiesel and Ethanol Definitions and Retail Requirements Biodiesel blend stock must be at least 99% biodiesel (no more than 1% diesel fuel) and meet ASTM specification D6751....

  19. Transforming and Refining Abstract Constraint Specifications

    E-Print Network [OSTI]

    Walsh, Toby

    Transforming and Refining Abstract Constraint Specifications Alan M. Frisch1 , Brahim Hnich2 , Ian choose model transformations to reduce greatly the amount of effort that is required to solve a problem by systematic search. It is a consid- erable challenge to automate such transformations. A problem may be viewed

  20. Ultrasonic hydrometer. [Specific gravity of electrolyte

    DOE Patents [OSTI]

    Swoboda, C.A.

    1982-03-09T23:59:59.000Z

    The disclosed ultrasonic hydrometer determines the specific gravity (density) of the electrolyte of a wet battery, such as a lead-acid battery. The hydrometer utilizes a transducer that when excited emits an ultrasonic impulse that traverses through the electrolyte back and forth between spaced sonic surfaces. The transducer detects the returning impulse, and means measures the time t between the initial and returning impulses. Considering the distance d between the spaced sonic surfaces and the measured time t, the sonic velocity V is calculated with the equation V = 2d/t. The hydrometer also utilizes a thermocouple to measure the electrolyte temperature. A hydrometer database correlates three variable parameters including sonic velocity in and temperature and specific gravity of the electrolyte, for temperature values between 0 and 40/sup 0/C and for specific gravity values between 1.05 and 1.30. Upon knowing two parameters (the calculated sonic velocity and the measured temperature), the third parameter (specific gravity) can be uniquely found in the database. The hydrometer utilizes a microprocessor for data storage and manipulation.

  1. SAVCBS 2003 Specification and Verification of

    E-Print Network [OSTI]

    Leavens, Gary T.

    ://www.cs.iastate.edu/SAVCBS/ September 1-2, 2003 Helsinki, Finland Workshop at ESEC/FSE 2003 9th European Software Engineering ConferenceSAVCBS 2003 Specification and Verification of Component-Based Systems ESEC/FSE 2003 9th European Software Engineering Conference and 11th ACM SIGSOFT Symposium on the Foundations of Software Engineering

  2. Dimerization specificities of leucine zipper mutants

    E-Print Network [OSTI]

    Rieker, Jennifer Dawn

    2013-02-22T23:59:59.000Z

    The dimerization specificity of a leucine zipper is partially determined by the interactions of charged amino acids on the surfaces of dimer interfaces (e and g positions). A series of e and g position GCN4 mutants has been described that do...

  3. Spent Nuclear Fuel (SNF) Project Product Specification

    SciTech Connect (OSTI)

    PAJUNEN, A.L.

    2000-01-20T23:59:59.000Z

    This document establishes the limits and controls for the significant parameters that could potentially affect the safety and/or quality of the Spent Nuclear Fuel (SNF) packaged for processing, transport, and storage. The product specifications in this document cover the SNF packaged in Multi-Canister Overpacks to be transported throughout the SNF Project.

  4. Designing A High Level Test Specification

    E-Print Network [OSTI]

    Sun, Jing

    Designing A High Level Test Specification Language For iec 61499 function block diagram formulae. introduction Mohamad Farid Jaafar Iec 61499 Function block IEC 61499 is one of the standards((input=accelPressed) & (label=throttle.ACCEL))) Figure 1. The IEC 61499 Function Block Notation. (a) Basic Blocks (b) Composite

  5. CHEMICAL HYGIENE PLAN LAB SPECIFIC INFORMATION

    E-Print Network [OSTI]

    Bigelow, Stephen

    CHEMICAL HYGIENE PLAN (CHP) LAB SPECIFIC INFORMATION & STANDARD OPERATING PROCEDURES (SOPs/23/09 This is the Chemical Hygiene Plan (CHP) for the Materials Research Laboratory (MRL) Spectroscopy Facility. All labs Chemical Hygiene Plan NMR Laboratory Form Version 8/6/98 1. General Laboratory Information Laboratory Name

  6. THE DEVELOPMENTAL SPECIFICITY OF PHYSICAL MECHANISMS

    E-Print Network [OSTI]

    Newman, Stuart A.

    THE DEVELOPMENTAL SPECIFICITY OF PHYSICAL MECHANISMS STUART A. NEWMAN Marta Linde understanding was bumpy and tortuous, with not everybody arriving at the same place (Linde-Medina 2010). Among populations. The molding of the forms by functional requirements leads Linde-Medina to term this school

  7. Modeling and Validation of Pipeline Specifications

    E-Print Network [OSTI]

    Mishra, Prabhat

    -on-Chip design process. Many existing approaches employ a bottom-up approach to pipeline validation, where description language (ADL) constructs, and thus allows a powerful top-down approach to pipeline validationModeling and Validation of Pipeline Specifications PRABHAT MISHRA and NIKIL DUTT University

  8. PROGRAMME SPECIFICATION Programme name Radiography (Computed Tomography);

    E-Print Network [OSTI]

    Weyde, Tillman

    1 PROGRAMME SPECIFICATION KEY FACTS Programme name Radiography (Computed Tomography); Radiography in a clinical speciality, for example, Computed Tomography, you must successfully complete the Computed-time The postgraduate programmes in Radiography provide advanced education in #12;2 Computed Tomography and Medical

  9. Ultrahigh Specific Impulse Nuclear Thermal Propulsion

    SciTech Connect (OSTI)

    Anne Charmeau; Brandon Cunningham; Samim Anghaie

    2009-02-09T23:59:59.000Z

    Research on nuclear thermal propulsion systems (NTP) have been in forefront of the space nuclear power and propulsion due to their design simplicity and their promise for providing very high thrust at reasonably high specific impulse. During NERVA-ROVER program in late 1950's till early 1970's, the United States developed and ground tested about 18 NTP systems without ever deploying them into space. The NERVA-ROVER program included development and testing of NTP systems with very high thrust (~250,000 lbf) and relatively high specific impulse (~850 s). High thrust to weight ratio in NTP systems is an indicator of high acceleration that could be achieved with these systems. The specific impulse in the lowest mass propellant, hydrogen, is a function of square root of absolute temperature in the NTP thrust chamber. Therefor optimizing design performance of NTP systems would require achieving the highest possible hydrogen temperature at reasonably high thrust to weight ratio. High hydrogen exit temperature produces high specific impulse that is a diret measure of propellant usage efficiency.

  10. Writing Motor Specifications - How to Include Efficiency 

    E-Print Network [OSTI]

    Quartermaine, B. J.

    1980-01-01T23:59:59.000Z

    be as low as 50% load. EFFICIENCY EVALUATION Unless advised otherwise, a motor manufacturer will not know that effiency is to be evaluated and as a result is likely to offer the least cost motor when tendering for a specific application. Hence...

  11. Mining malware specifications through static reachability analysis

    E-Print Network [OSTI]

    Boyer, Edmond

    Mining malware specifications through static reachability analysis Hugo Daniel Macedo1 and Tayssir be used to model the stack operations occurring during the binary code execution), use reachability the file under analysis is malicious. Experimental data shows that our approach can be used to learn

  12. Security Policy Specification Using a Graphical Approach Page 1 Security Policy Specification Using a Graphical

    E-Print Network [OSTI]

    California at Davis, University of

    Security Policy Specification Using a Graphical Approach Page 1 Security Policy Specification Using of California, Davis {hoagland,pandey,levitt}@cs.ucdavis.edu Technical Report CSE-98-3 A security policy states for organizations to declare their security policies, even informal state- ments would be better than the current

  13. Monoclonal antibodies specific for sickle cell hemoglobin

    SciTech Connect (OSTI)

    Jensen, R.H.; Vanderlaan, M.; Grabske, R.J.; Branscomb, E.W.; Bigbee, W.L.; Stanker, L.H.

    1985-01-01T23:59:59.000Z

    Two mouse hybridoma cell lines were isolated which produce monoclonal antibodies that bind hemoglobin S. The mice were immunized with peptide-protein conjugates to stimulate a response to the amino terminal peptide of the beta chain of hemoglobin S, where the single amino acid difference between A and S occurs. Immunocharacterization of the antibodies shows that they bind specifically to the immunogen peptide and to hemoglobin S. The specificity for S is high enough that one AS cell in a mixture with a million AA cells is labeled by antibody, and such cells can be analyzed by flow cytometry. Immunoblotting of electrophoretic gels allows definitive identification of hemoglobin S as compared with other hemoglobins with similar electrophoretic mobility. 12 references, 4 figures.

  14. Drug delivery by organ-specific immunoliposomes

    SciTech Connect (OSTI)

    Maruyama, Kazuo; Mori, Atsuhide; Hunag, Leaf (Tennessee Univ., Knoxville, TN (USA). Dept. of Biochemistry); Kennel, S.J. (Oak Ridge National Lab., TN (USA))

    1990-01-01T23:59:59.000Z

    Monoclonal antibodies highly specific to the mouse pulmonary endothelial cells were conjugated to liposomes. The resulting immunoliposomes showed high levels of lung accumulation when injected intravenously into mice. Optimal target binding and retention were achieved if the lipid composition included ganglioside GM{sub 1} to reduce the uptake of immunoliposomes by the reticuloendothelial system. Details of the construction and optimization of these organ-specific immunoliposomes are reviewed. The drug delivery potential of this novel liposome system was demonstrated in an experimental pulmonary metastasis model. Immunoliposomes containing a lipophilic prodrug of deoxyfluorouridine effectively prolonged the survival time of the tumor-bearing mice. This and other therapeutic applications of the immunoliposomes are discussed. 25 refs., 5 figs.

  15. The Reaction Specificity of Nanoparticles in Solution

    SciTech Connect (OSTI)

    Baer, Donald R.

    2006-06-01T23:59:59.000Z

    Iron-based metallic and oxide nanoparticles have been shown to have enhanced reactivity towards a variety of chemical species, including chlorinated hydrocarbons and reducible oxyanions, which frequently contaminate ground water at DOE and other government and industrial sites. Possibly of greater importance is the ability of these nanoparticles to select specific reaction pathways, potentially facilitating the formation of the most environmentally acceptable reaction products.

  16. Composition Semantics of the Rosetta Specification Language

    E-Print Network [OSTI]

    Peck, Megan Elizabeth

    2012-08-31T23:59:59.000Z

    using Coalgebras . . . . . . . . . . . . . . . . . . . . . . . 82 6.2.1 Process Calculi . . . . . . . . . . . . . . . . . . . . . . . . . . 83 6.2.2 Coalgebras in Java Semantics . . . . . . . . . . . . . . . . . . 83 6.2.3 Previous Work on Rosetta.... Components may have inputs and outputs that allow them to be parameterized and to communicate with other specification constructs. The terms within a component may either be Boolean expressions written in Rosetta’s expression language or may instantiate other...

  17. Face Recognition Deficits in Autism Spectrum Disorders Are Both Domain Specific and Process Specific

    E-Print Network [OSTI]

    Weigelt, Sarah

    Although many studies have reported face identity recognition deficits in autism spectrum disorders (ASD), two fundamental question remains: 1) Is this deficit “process specific” for face memory in particular, or does it ...

  18. Standard technical specifications: Combustion engineering plants. Volume 1, Revision 1: Specifications

    SciTech Connect (OSTI)

    NONE

    1995-04-01T23:59:59.000Z

    This report documents the results of the combined effort of the NRC and the industry to produce improved Standard Technical Specifications (STS), Revision 1 for Combustion Engineering Plants. The changes reflected in Revision 1 resulted from the experience gained from license amendment applications to convert to these improved STS or to adopt partial improvements to existing technical specifications. This NUREG is the result of extensive public technical meetings and discussions between the Nuclear Regulatory Commission (NRC) staff and various nuclear power plant licensees, Nuclear Steam Supply System (NSSS) Owners Groups, NSSS vendors, and the Nuclear Energy Institute (NEI). The improved STS were developed based on the criteria in the Final Commission Policy Statement on Technical Specifications Improvements for Nuclear Power Reactors, dated July 22, 1993. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. Volume 3 contains the Bases for Sections 3.4--3.9 of the improved STS.

  19. Surface Electronic Properties and Site-Specific Laser Desorption...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Properties and Site-Specific Laser Desorption Processes of Highly Structured Nanoporous MgO Thin Films. Surface Electronic Properties and Site-Specific Laser Desorption Processes...

  20. Draft Specifications for Application of UNFC-2009 to Renewable...

    Open Energy Info (EERE)

    Draft Specifications for Application of UNFC-2009 to Renewable Energy Resources Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Draft Specifications for...

  1. Odessa fabricator builds rig specifically for geothermal drilling...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Odessa fabricator builds rig specifically for geothermal drilling Odessa fabricator builds rig specifically for geothermal drilling August 3, 2008 - 2:59pm Addthis For 35 years, MD...

  2. An Object-Oriented Algebraic Steam-Boiler Control Specification

    E-Print Network [OSTI]

    Ã?lveczky, Peter Csaba

    An Object-Oriented Algebraic Steam-Boiler Control Specification computations cannot happen. 1 Introduction The steam-boiler control specification problem has been

  3. application specific scintimammography: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Topic Index 21 Dear Applicant DisabilitySpecific Learning Difficulties (including Dyslexia and Dyspraxia) and Mathematics Websites Summary: Dear Applicant DisabilitySpecific...

  4. N-Terminal Enrichment: Developing a Protocol to Detect Specific...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Terminal Enrichment: Developing a Protocol to Detect Specific Proteolytic Fragments. N-Terminal Enrichment: Developing a Protocol to Detect Specific Proteolytic Fragments....

  5. anatomically specific patterns: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    conversion of specifications between formalisms. Indeed 26 Patterns for Representing FMEA in Formal Specification of Control Systems Ilya Lopatkin, Alexei Iliasov, Engineering...

  6. Production Of High Specific Activity Copper-67

    SciTech Connect (OSTI)

    Jamriska, Sr., David J. (Los Alamos, NM); Taylor, Wayne A. (Los Alamos, NM); Ott, Martin A. (Los Alamos, NM); Fowler, Malcolm (Los Alamos, NM); Heaton, Richard C. (Los Alamos, NM)

    2003-10-28T23:59:59.000Z

    A process for the selective production and isolation of high specific activity Cu.sup.67 from proton-irradiated enriched Zn.sup.70 target comprises target fabrication, target irradiation with low energy (<25 MeV) protons, chemical separation of the Cu.sup.67 product from the target material and radioactive impurities of gallium, cobalt, iron, and stable aluminum via electrochemical methods or ion exchange using both anion and cation organic ion exchangers, chemical recovery of the enriched Zn.sup.70 target material, and fabrication of new targets for re-irradiation is disclosed.

  7. Production Of High Specific Activity Copper-67

    SciTech Connect (OSTI)

    Jamriska, Sr., David J. (Los Alamos, NM); Taylor, Wayne A. (Los Alamos, NM); Ott, Martin A. (Los Alamos, NM); Fowler, Malcolm (Los Alamos, NM); Heaton, Richard C. (Los Alamos, NM)

    2002-12-03T23:59:59.000Z

    A process for the selective production and isolation of high specific activity cu.sup.67 from proton-irradiated enriched Zn.sup.70 target comprises target fabrication, target irradiation with low energy (<25 MeV) protons, chemical separation of the Cu.sup.67 product from the target material and radioactive impurities of gallium, cobalt, iron, and stable aluminum via electrochemical methods or ion exchange using both anion and cation organic ion exchangers, chemical recovery of the enriched Zn.sup.70 target material, and fabrication of new targets for re-irradiation is disclosed.

  8. Specific energy for laser removal of rocks.

    SciTech Connect (OSTI)

    Xu, Z.; Kornecki, G.; Reed, C. B.; Gahan, B. C.; Parker, R. A.; Batarseh, S.; Graves, R. M.

    2001-08-16T23:59:59.000Z

    Application of advanced high power laser technology into oil and gas well drilling has been attracting significant research interests recently among research institutes, petroleum industries, and universities. Potential laser or laser-aided oil and gas well drilling has many advantages over the conventional rotary drilling, such as high penetration rate, reduction or elimination of tripping, casing, and bit costs, and enhanced well control, perforating and side-tracking capabilities. The energy required to remove a unit volume of rock, namely the specific energy (SE), is a critical rock property data that can be used to determine both the technical and economic feasibility of laser oil and gas well drilling.

  9. An investigation on stochastic specific activity curves

    E-Print Network [OSTI]

    Lee, Dominic Yat-Hung

    1973-01-01T23:59:59.000Z

    . into homogeneous components called. compartment s. (3) The system is in steady state, i. e. , compartments have a constant size and. are connected by fixed. flow rates. (4) The introduction of tracer does not alter the behavior of the system. (5) The system... 0. 10 SA (t) SA (t) Figure 3. 2. 2 Deterministic Specific Activity-Time Curve With stochastic flow of the tracer, the curves shown in Figure 3. 2. 2 (p. 10) would not be smooth, instead. they take the form as shown in Figure 4. 2. 1 (p. 18...

  10. Project specific selection of decommissioning techniques

    SciTech Connect (OSTI)

    Christ, B.G.; Wehner, E.L. [NUKEM GmbH, Alzenau (Germany). Nuclear Technology Div.

    1993-12-31T23:59:59.000Z

    Three decommissioning projects with quite different contamination characteristics were terminated with the requested result of freely released rooms for dismantled buildings under supervision of the responsible authorities. The examples show that control areas with different kinds of contamination and different equipment can be decommissioned with reasonable effort. The specific selection of decontamination methods and measurement techniques optimizes the performance of the project and lowers the amount of primary and secondary active waste. The careful planning of radiation protection measures ensures the safe work within the foreseen time schedule.

  11. Solar Photovoltaic SPECIFICATION, CHECKLIST AND GUIDE

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideo »UsageSecretary ofSmallConfidential, 4/22/2013Photovoltaic SPECIFICATION,

  12. Global and site specific multimedia (field) studies

    SciTech Connect (OSTI)

    Cutshall, N.H.; Guerin, M.R.

    1987-01-01T23:59:59.000Z

    Experience with radioactive fallout, with organic contaminants and with heavy metals has amply demonstrated that cross-media transfers are common and that understanding the transport, cycling, and fate of these contaminants requires a multimedia approach. Nonetheless, pollutants with similar physical and chemical attributes may follow markedly different pathways. The frequency of exceptions to predictions based on simplistic models is also sufficient to show that direct investigation of environmental contamination is essential to confirm validity of models used for conceptualizing a problem or for control. Modeling based on multimedia premises and regulatory controls that encompass multimedia considerations are challenged by a dilemma, however. First, the development of multimedia models or regulatory frameworks represents simplification and generalization. This is true for several reasons: (1) inadequate understanding of physical and environmental factors which control specific cross-media transfer; (2) the absence of specific data on certain multimedia pollutant concentrations; (3) even the most powerful computers do not have sufficient speed and capacity to deal with the known complexities of natural systems. On the other hand, for contaminants such as mercury, it may be necessary to include great detail; the overall distribution in the environment may be less important than the rate of some minor process. With sufficient experience and good judgment of what can be ignored, the simplifications and generalizations can be made. For the present, and for the foreseeable future, however, they absolutely must be accompanied by thorough field validation and monitoring.

  13. Evolution and Development of Effective Feedstock Specifications

    SciTech Connect (OSTI)

    Garold Gresham; Rachel Emerson; Amber Hoover; Amber Miller; William Bauer; Kevin Kenney

    2013-09-01T23:59:59.000Z

    The U.S. Department of Energy promotes the production of a range of liquid fuels and fuel blend stocks from lignocellulosic biomass feedstocks by funding fundamental and applied research that advances the state of technology in biomass collection, conversion, and sustainability. As part of its involvement in this program, the Idaho National Laboratory (INL) investigates the feedstock logistics economics and sustainability of these fuels. The 2012 feedstock logistics milestone demonstrated that for high-yield areas that minimize the transportation distances of a low-density, unstable biomass, we could achieve a delivered cost of $35/ton. Based on current conventional equipment and processes, the 2012 logistics design is able to deliver the volume of biomass needed to fulfill the 2012 Renewable Fuel Standard’s targets for ethanol. However, the Renewable Fuel Standard’s volume targets are continuing to increase and are expected to peak in 2022 at 36 billion gallons. Meeting these volume targets and achieving a national-scale biofuels industry will require expansion of production capacity beyond the 2012 Conventional Feedstock Supply Design Case to access diverse available feedstocks, regardless of their inherent ability to meet preliminary biorefinery quality feedstock specifications. Implementation of quality specifications (specs), as outlined in the 2017 Design Case – “Feedstock Supply System Design and Economics for Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels” (in progress), requires insertion of deliberate, active quality controls into the feedstock supply chain, whereas the 2012 Conventional Design only utilizes passive quality controls.

  14. Isotope Specific Remediation Media and Systems - 13614

    SciTech Connect (OSTI)

    Denton, Mark S.; Mertz, Joshua L. [Kurion, Inc. Oak Ridge, Tennessee 37831 (United States)] [Kurion, Inc. Oak Ridge, Tennessee 37831 (United States); Morita, Keisuke [Japan Atomic Energy Agency, Tokai Research and Development Center, Fukushima Project Team, Tokai-mura, Ibaraki-ken, 319-1195 (Japan)] [Japan Atomic Energy Agency, Tokai Research and Development Center, Fukushima Project Team, Tokai-mura, Ibaraki-ken, 319-1195 (Japan)

    2013-07-01T23:59:59.000Z

    On March 11, 2011, now two years ago, the magnitude 9.0 Great East Japan earthquake, Tohoku, hit off the Fukushima coast of Japan. While, of course, most of the outcome of this unprecedented natural and manmade disaster was a negative, both in Japan and worldwide, there have been some extremely invaluable lessons learned and new emergency recovery technologies and systems developed. As always, the mother of invention is necessity. Among these developments has been the development and full-scale implementation of proven isotope specific media (ISMs) with the intent of surgically removing specific hazardous isotopes for the purpose of minimizing dose to workers and the environment. The first such ISMs to be deployed at the Fukushima site were those removing cesium (Cs-137) and iodine (I-129). Since deployment on June 17, 2011, along with treated cooling water recycle, some 70% of the curies in the building liquid wastes have been removed by the Kurion system alone. The current levels of cesium are now only 2% of the original levels. Such an unprecedented, 'external cooling system' not only allowed the eventual cold shut down of the reactors in mid-December, 2011, but has allowed workers to concentrate on the cleanup of other areas of the site. Water treatment will continue for quite some time due to continued leakage into the buildings and the eventual goal of cleaning up the reactors and fuel pools themselves. With the cesium removal now in routine operation, other isotopes of concern are likely to become priorities. One such isotope is that of strontium, and yttrium (Sr-90 and Y-90), which is still at original levels causing further dose issues as well as impediments to discharge of the treated waste waters. For over a year now, a new synthetic strontium specific media has been under development and testing both in our licensed facility in Oak Ridge, Tennessee, but also in confirmatory tests by the Japan Atomic Energy Agency (JAEA) in Japan for Tokyo Electric Power Company (TEPCO). The tests have proven quite successful, even in high salt conditions, and, with loading and dose calculations being completed, will be proposed to add to the existing cesium system. There is no doubt, as high gamma isotopes are removed, other recalcitrant isotopes such as this will require innovative removal media, systems and techniques. Also coming out of this international effort are other ISM media and systems that can be applied more broadly to both Commercial Nuclear Power Plants (NPPs) as well as in Department of Energy (DOE) applications. This cesium and strontium specific media has further been successfully tested in 2012 at a Magnox station in the UK. The resulting proposed mitigation systems for pond and vault cleanup look quite promising. An extremely unusual ISM for carbon 14 (C-14), nickel (Ni-63) and cesium (Cs-137) has been developed for Diablo Canyon NPP for dose reduction testing in their fuel pool. These media will be deployed in Submersible Media Filter (SMF) and Submersible Columns (SC) systems adapted to standard Tri-Nuclear{sup R} housings common in the U.S. and UK. External Vessel Systems (mini-Fukushima) have also been developed as a second mitigation system for D and D and outages. Finally, technetium (Tc- 99) specific media developed for the Waste Treatment Plant (WTP) recycle or condensate (secondary) waste streams (WM 2011) are being further perfected and tested for At-Tank Tc-99 removal, as well as At Tank Cs media. In addition to the on-going media development, systems for deploying such media have developed over the last year and are in laboratory- and full-scale testing. These systems include the fore mentioned Submersible Media Filters (SMF), Submersible Columns (SC) and external pilot- and full-scale, lead-lag, canister systems. This paper will include the media development and testing, as well as that of the deployment systems themselves. (authors)

  15. A summary of North American HVDC converter station reliability specifications

    SciTech Connect (OSTI)

    Vancers, I. (ABB Power Systems Inc., Los Angeles, CA (United States)); Hormozi, F.J. (Los Angeles Dept. of Water and Power, CA (United States))

    1993-07-01T23:59:59.000Z

    This paper summarizes Reliability, Availability, and Maintainability (RAM) specifications that were issued for thyristor based HVDC converter stations in service in North America. A total of twenty project specifications are summarized. A detailed summary by project is shown with specific quantitative requirements categorized. Definitions of terms, representative design principles, and formulas used in calculating RAM parameters contained in existing reliability specifications are presented.

  16. Savannah River Site's Site Specific Plan

    SciTech Connect (OSTI)

    Not Available

    1991-08-01T23:59:59.000Z

    This Site Specific Plan (SSP) has been prepared by the Savannah River Site (SRS) in order to show the Environmental Restoration and Waste Management activities that were identified during the preparation of the Department of Energy-Headquarters (DOE-HQ) Environmental Restoration and Waste Management Five-Year Plan (FYP) for FY 1992--1996. The SSP has been prepared in accordance with guidance received from DOE-HQ. DOE-SR is accountable to DOE-HQ for the implementation of this plan. The purpose of the SSP is to develop a baseline for policy, budget, and schedules for the DOE Environmental Restoration and Waste Management activities. The plan explains accomplishments since the Fiscal Year (FY) 1990 plan, demonstrates how present and future activities are prioritized, identifies currently funded activities and activities that are planned to be funded in the upcoming fiscal year, and describes future activities that SRS is considering.

  17. Diverse specificity, phenotype and anti-viral activity of cytomegalovirus specific CD8+ T cells

    E-Print Network [OSTI]

    Jackson, S. E.; Mason, G. M.; Okecha, G.; Sisson, J. G. P.; Wills, M. R.

    2014-07-09T23:59:59.000Z

    % Fetal Calf Serum (FCS) (PAA, Linz, Austria) solution. 147 Frozen PBMC were rapidly thawed in a 37°C water bath and the freezing medium 148 diluted into 25mls of fresh RPMI-10, centrifuged and resuspended in fresh RPMI-10 149 before use. 150 151... of expanded CD8+ T cell cultures 223 using mapped peptides was determined by specific pentamer staining, cells were 224 harvested and washed and then stained with the specific unlabelled pentamer 225 (ProImmune), washed and then further stained...

  18. Specific energy for pulsed laser rock drilling.

    SciTech Connect (OSTI)

    Xu, Z.; Reed, C. B.; Kornecki, G.; Gahan, B. C.; Parker, R. A.; Batarseh, S.; Graves, R. M.; Figueroa, H.; Skinner, N.; Technology Development

    2003-02-01T23:59:59.000Z

    Application of advanced high power laser technology to oil and gas well drilling has been attracting significant research interests recently among research institutes, petroleum industries, and universities. Potential laser or laser-aided oil and gas well drilling has many advantages over the conventional rotary drilling, such as high penetration rate, reduction or elimination of tripping, casing, and bit costs, and enhanced well control, perforating and side-tracking capabilities. The energy required to remove a unit volume of rock, namely the specific energy (SE), is a critical rock property data that can be used to determine both the technical and economic feasibility of laser oil and gas well drilling. When a high power laser beam is applied on a rock, it can remove the rock by thermal spallation, melting, or vaporization depending on the applied laser energy and the way the energy is applied. The most efficient rock removal mechanism would be the one that requires the minimum energy to remove a unit volume of rock. Samples of sandstone, shale, and limestone were prepared for laser beam interaction with a 1.6 kW pulsed Nd:yttrium-aluminum-garnet laser beam to determine how the beam size, power, repetition rate, pulse width, exposure time and energy can affect the amount of energy transferred to the rock for the purposes of spallation, melting, and vaporization. The purpose of the laser rock interaction experiment was to determine the optimal parameters required to remove a maximum rock volume from the samples while minimizing energy input. Absorption of radiant energy from the laser beam gives rise to the thermal energy transfer required for the destruction and removal of the rock matrix. Results from the tests indicate that each rock type has a set of optimal laser parameters to minimize specific energy (SE) values as observed in a set of linear track and spot tests. As absorbed energy outpaces heat diffusion by the rock matrix, local temperatures can rise to the melting points of the minerals and quickly increase observed SE values. Tests also clearly identified the spallation and melting zones for shale samples while changing the laser power. The lowest SE values are obtained in the spalling zone just prior to the onset of mineral melt. The laser thermally spalled and saw mechanically cut rocks show similarity of surface microstructure. The study also found that increasing beam repetition rate within the same material removal mechanism would increase the material removal rate, which is believed due to an increase of maximum temperature, thermal cycling frequency, and intensity of laser-driven shock wave within the rock.

  19. Specifications of Futures and Options Contracts

    E-Print Network [OSTI]

    Welch, Mark; Robinson, John; Anderson, David P.

    2009-06-01T23:59:59.000Z

    mechanisms and changes in futures contract specifications. Mark Welch, John Robinson and David P. Anderson* 2 ( c o n t i n u e d o n n e x t p a ge ) T a bl e 1 . C o n t r a c t s p e c i fi c a t i o n s f or a g r i c u l t u r a l c ro p a n d l iv e... s t o ck f u t u r e s . C om m o di t y & s i z e o f c o n t r a c t T i c k e r s y m b o l T r a d i n g h o u r s ( c e n t r a l t i m e ) M o nt h s t ra d e d P r i c e quo t e s M i n i m u m p r i c e fluc t u a t i on D a i l y l i m i...

  20. Production of high specific activity silicon-32

    DOE Patents [OSTI]

    Phillips, Dennis R. (Los Alamos, NM); Brzezinski, Mark A. (Santa Barbara, CA)

    1994-01-01T23:59:59.000Z

    A process for preparation of silicon-32 is provide and includes contacting an irradiated potassium chloride target, including spallation products from a prior irradiation, with sufficient water, hydrochloric acid or potassium hydroxide to form a solution, filtering the solution, adjusting pH of the solution to from about 5.5 to about 7.5, admixing sufficient molybdate-reagent to the solution to adjust the pH of the solution to about 1.5 and to form a silicon-molybdate complex, contacting the solution including the silicon-molybdate complex with a dextran-based material, washing the dextran-based material to remove residual contaminants such as sodium-22, separating the silicon-molybdate complex from the dextran-based material as another solution, adding sufficient hydrochloric acid and hydrogen peroxide to the solution to prevent reformation of the silicon-molybdate complex and to yield an oxidization state of the molybdate adapted for subsequent separation by an anion exchange material, contacting the solution with an anion exchange material whereby the molybdate is retained by the anion exchange material and the silicon remains in solution, and optionally adding sufficient alkali metal hydroxide to adjust the pH of the solution to about 12 to 13. Additionally, a high specific activity silicon-32 product having a high purity is provided.

  1. Specifications of Futures and Options Contracts 

    E-Print Network [OSTI]

    Welch, Mark; Robinson, John; Anderson, David P.

    2009-06-01T23:59:59.000Z

    mechanisms and changes in futures contract specifications. Mark Welch, John Robinson and David P. Anderson* 2 ( c o n t i n u e d o n n e x t p a ge ) T a bl e 1 . C o n t r a c t s p e c i fi c a t i o n s f or a g r i c u l t u r a l c ro p a n d l iv e... s t o ck f u t u r e s . C om m o di t y & s i z e o f c o n t r a c t T i c k e r s y m b o l T r a d i n g h o u r s ( c e n t r a l t i m e ) M o nt h s t ra d e d P r i c e quo t e s M i n i m u m p r i c e fluc t u a t i on D a i l y l i m i...

  2. MEASUREMENT OF SPECIFIC HEAT CAPACITY OF SALTSTONE

    SciTech Connect (OSTI)

    Harbour, J; Vickie Williams, V

    2008-09-29T23:59:59.000Z

    One of the goals of the Saltstone variability study is to identify (and quantify the impact of) the operational and compositional variables that control or influence the important processing and performance properties of Saltstone grout mixtures. The heat capacity of the Saltstone waste form is one of the important properties of Saltstone mixes that was last measured at SRNL in 1997. It is therefore important to develop a core competency for rapid and accurate analysis of the specific heat capacity of the Saltstone mixes in order to quantify the impact of compositional and operational variations on this property as part of the variability study. The heat capacity, coupled with the heat of hydration data obtained from isothermal calorimetry for a given Saltstone mix, can be used to predict the maximum temperature increase in the cells within the vaults of the Saltstone Disposal Facility (SDF). The temperature increase controls the processing rate and the pour schedule. The maximum temperature is also important to the performance properties of the Saltstone. For example, in mass pours of concrete or grout of which Saltstone is an example, the maximum temperature increase and the maximum temperature difference (between the surface and the hottest location) are controlled to ensure durability of the product and prevent or limit the cracking caused by the thermal gradients produced during curing. This report details the development and implementation of a method for the measurement of the heat capacities of Saltstone mixes as well as the heat capacities of the cementitious materials of the premix and the simulated salt solutions used to batch the mixes. The developed method utilizes the TAM Air isothermal calorimeter and takes advantage of the sophisticated heat flow measurement capabilities of the instrument. Standards and reference materials were identified and used to validate the procedure and ensure accuracy of testing. Heat capacities of Saltstone mixes were {approx} 55% higher than the previous measurement of specific heat capacity on a reference Saltstone mix in 1997. Values of mixes prepared using Deliquification, Dissolution and Adjustment (DDA), Modular Caustic Side Solvent Extraction Unit (MCU) and Salt Waste Processing Facility (SWPF) simulants and premix at 0.60 w/cm ratio were {approx} 1.95 J/g/{sup o}C and were equivalent within experimental error. The simple law of mixtures was used to predict the heat capacities of the Saltstone and the results were in excellent agreement with experimental data. This simple law of mixtures can therefore be used to predict the heat capacities of Saltstone mixes in those cases where measurements have not been made. The time dependence of the heat capacity is important as an input to the modeling of temperature increase in Saltstone vaults. The heat capacity of a mix of MCU and premix at 0.60 w/cm ratio was measured immediately after initial mixing and then periodically up to times greater than 100 days. Within experimental error, the heat capacity did not change with time. Therefore, the modeling is not complicated by requiring a time dependent function for specific heat capacity. The water to cementitious material (w/cm) ratio plays a key role in determining the value of the heat capacity. Both experimental and predictive values for SWPF mixes as function of the w/cm ratio were obtained and presented in this report. Predictions of the maximum temperatures of the Saltstone mixes were made using the heat of hydration data from previous isothermal measurements and the newly measured heat capacities for DDA, MCU and SWPF mixes. The maximum temperature increase ranged from 37 to 48 C for these mixes. The presence of aluminate at 0.33 M produced a temperature increase of 68 C which is close to the adiabatic temperature rise of 74 C observed by Steimke and Fowler in 1997 for a mix containing 0.35 M aluminate. Aluminum dissolution of the sludge will increase the aluminate in the DSS which in turn will result in a larger temperature increase in the Saltstone vaults during the curing p

  3. Semantics of first order parametric specifications Dusko Pavlovi'c

    E-Print Network [OSTI]

    Pavlovic, Dusko

    in the algebraic setting and are by now a standard part of most software development toolkits. However, an effort specifications was proposed early on and became a standard part of specification theory (cf. e.g. [8, 12, 13

  4. Steam boiler control specification problem: A TLA solution

    E-Print Network [OSTI]

    Merz, Stephan

    Steam boiler control specification problem: A TLA solution Frank LeÃ?ke and Stephan Merz Institut f Introduction We propose a solution to the steam boiler control specification problem [AS] by means of a formal

  5. An Object-Oriented Algebraic Steam-Boiler Control Specification

    E-Print Network [OSTI]

    Ã?lveczky, Peter Csaba

    An Object-Oriented Algebraic Steam-Boiler Control Specification Peter Csaba ()lveczky Introduction The steam-boiler control specification problem has been proposed as a challenge for different

  6. An ObjectOriented Algebraic SteamBoiler Control Specification

    E-Print Network [OSTI]

    Ã?lveczky, Peter Csaba

    An Object­Oriented Algebraic Steam­Boiler Control Specification Peter Csaba Ë? Olveczky 1# , Piotr Introduction The steam­boiler control specification problem has been proposed as a challenge for di

  7. altered recombination specificity: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    plasmas. The specific context for this study is astrophysical plasmas, (more) Bennet, Euan David 2012-01-01 32 Altered Expression ofAn Ll-Specific, O-Linked Cuticle...

  8. Element specific measurements of the structural properties and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Element specific measurements of the structural properties and magnetism of CoxZn1-xO. Element specific measurements of the structural properties and magnetism of CoxZn1-xO....

  9. Solution Self-Assembly of Sequence Specific Biomimetic Polymers

    E-Print Network [OSTI]

    Murnen, Hannah

    2012-01-01T23:59:59.000Z

    from sequence-specific peptoid polymers. Nat. Mater. 2010, 9from sequence-specific peptoid polymers. Nat. Mater. 2010, 9in a folded nonbiological polymer. J. Am. Chem. Soc. Patch,

  10. Contrasting Adult Literacy Learners With and Without Specific Learning Disabilities

    E-Print Network [OSTI]

    Patterson, Margaret; Mellard, Daryl

    2008-04-01T23:59:59.000Z

    Contrasting adult literacy learners with and without specific learning disabilities This study of 311 adult education (AE) learners found 29% self-reported having a specific learning disability (SLD). Significant differences ...

  11. Nutrition, digestive system and digestion specificity in phytophagous bats

    E-Print Network [OSTI]

    Boyer, Edmond

    Nutrition, digestive system and digestion specificity in phytophagous bats NF Zhukova Schmalhausen arisen as to how the feeding and digestion specificity is revealed in phytophagous bats, and how the entire order specificity affects these processes. To tackle these issues, the digestive system

  12. Specification and Refinement of a RealTime Control System

    E-Print Network [OSTI]

    Smith, Graeme

    such approach via the specification and refinement of the well­known Steam Boiler Control Problem. The case. These features, although not central to the Steam Boiler Control Problem, are typical of features which must­level (i.e., abstract) specification of the Steam Boiler Control Problem. This specification is refined

  13. Hazard Communication Site Specific Information Sheet Hazard Communication Program (HCP)

    E-Print Network [OSTI]

    Slatton, Clint

    Hazard Communication Site Specific Information Sheet Hazard Communication Program (HCP) Site Specific Information The responsible party for a unit/area should complete this section to make the Hazard Communication Program site specific. The responsible party will ensure that the Hazard Communication Program

  14. Appendix B: LABORATORY-SPECIFIC CHEMICAL HYGIENE PLAN

    E-Print Network [OSTI]

    Ferrara, Katherine W.

    1 Appendix B: LABORATORY-SPECIFIC CHEMICAL HYGIENE PLAN The Laboratory Standard requires laboratory-specific Chemical Hygiene Plans. At UC Davis, this can be accomplished by having the person responsible ( the forms follow) and thus creating a laboratory-specific Chemical Hygiene Plan. For additional assistance

  15. Lab Home A and B Construction Specifications and Alterations

    E-Print Network [OSTI]

    Appendix A ­ Lab Home A and B Construction Specifications and Alterations #12;A.1 Appendix A -Lab Home A and B Construction Specifications and Alterations A.1 Lab Home A Construction Specifications walls that are replaced or constructed shall be taped, finished and painted in the original wall color

  16. Important Cognitive Components of Domain-Specific Search Knowledge

    E-Print Network [OSTI]

    Bhavnani, Suresh K.

    the subject-specific terms to enter in a query. For example, many university students often buy electronicImportant Cognitive Components of Domain-Specific Search Knowledge Suresh K. Bhavnani School Many users have acquired a sophisticated understanding of searching the Web in specific domains

  17. Dynamics Within an Organisation: Temporal Specification, Simulation and Evaluation

    E-Print Network [OSTI]

    Treur, Jan

    - 1 - Dynamics Within an Organisation: Temporal Specification, Simulation and Evaluation Catholijn is its dynamics. In this paper different types of specifications of properties of the dynamics within an organisation are introduced. Supporting tools for specification, simulation and analysis of dynamics within

  18. Sequence specific alkylation of DNA by hairpin pyrroleimidazole polyamide conjugates

    E-Print Network [OSTI]

    Stoltz, Brian M.

    Sequence specific alkylation of DNA by hairpin pyrrole­imidazole polyamide conjugates Nicholas R predetermined sequences in the minor groove of DNA with affinities and specificities comparable to those of DNA for covalent reaction at specific DNA sequences and thereby inhibit DNA­protein interactions. Site

  19. Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2003-01-01T23:59:59.000Z

    1.1 This document provides guidance in determining absorbed-dose distributions in products, materials or substances irradiated in gamma, X-ray (bremsstrahlung) and electron beam facilities. Note 1—For irradiation of food and the radiation sterilization of health care products, other specific ISO and ISO/ASTM standards containing dose mapping requirements exist. For food irradiation, see ISO/ASTM 51204, Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing and ISO/ASTM 51431, Practice for Dosimetry in Electron and Bremsstrahlung Irradiation Facilities for Food Processing. For the radiation sterilization of health care products, see ISO 11137: 1995, Sterilization of Health Care Products Requirements for Validation and Routine Control Radiation Sterilization. In those areas covered by ISO 11137, that standard takes precedence. ISO/ASTM Practice 51608, ISO/ASTM Practice 51649, and ISO/ASTM Practice 51702 also contain dose mapping requirements. 1.2 Methods of analyzing the dose map data ar...

  20. FORMT: Form-based Mutation Testing of Logical Specifications

    E-Print Network [OSTI]

    Faatz, Andreas

    2010-01-01T23:59:59.000Z

    The draft paper defines a system, which is capable of maintaining bases of test cases for logical specifications. The specifications, which are subject to this system are transformed from their original shape in first-order logic to form-based expressions as originally introduced in logics of George Spencer-Brown. The innovation comes from the operations the system provides when injecting faults - so-called mutations - to the specifications. The system presented here applies to logical specifications from areas as different as programming, ontologies or hardware specifications.

  1. Journal of ASTM International, June 2004, Vol. 1, No. 6 Paper ID JAI11871

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    S-2 contained cement, wood fly ash (11% of Cm), Class C coal fly ash (67% of Cm), and sand. Mixtures, and 1.4, 14.4, and 1.0 MPa at one year. Combination of wood and coal fly ashes might have caused slurry, permeability, wood fly ash Introduction U.S. pulp and paper mills generate about one million dry

  2. astm a533-b steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut, Claude 202 Flexural...

  3. astm a-890-1b stainless: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary: of stainless steel container materials is a potential problem for long-term radioactive waste storage-to-failure of relevant stainless steels in the annealed...

  4. Journal of ASTM International, May 2005, Vol. 2, No. 5 Paper ID JAI12375

    E-Print Network [OSTI]

    Motta, Arthur T.

    on three Zr-based alloys with varied corrosion behavior were studied with micro-beam synchrotron radiation alloys, corrosion, synchrotron radiation, X-ray diffraction, oxide microstructure Introduction The extended fuel burnup, longer fuel cycles, power uprates, higher temperatures, and increased lithium in PWR

  5. Lubricating-oil basestock data and analysis: based on the ASTM-NBS basestock consistency study

    SciTech Connect (OSTI)

    Becker, D.A.; Hsu, S.M.; Weeks, S.

    1983-10-01T23:59:59.000Z

    In this 13-month study, four virgin oil and six re-refined oil companies submitted monthly production samples to National Bureau of Standards (NBS). There, the samples were subdivided, coded, and sent to 14 participating laboratories for analysis of the physical and chemical properties as well as for evaluation in various bench tests. An eleventh control sample was sent monthly for reference. Various re-refining processes included in the study are: acid/clay; clay treatment; short path distillation; pretreat/vacuum distillation/clay finish; pretreat/hydrogenation. The processes for the virgin base oils are mainly solvent extraction/distillation with and without the hydro-finishing step. In this report the data are grouped into six main categories: (1) theology; (2) physical properties; (3) chemical properties; (4) hydrocarbon type analysis; (5) general performance tests; and (6) oxidation and wear bench tests. Within each category, test results are arranged according to the similarity of the tests or test properties.

  6. Journal of ASTM International, June 2005, Vol. 2, No. 6 Paper ID JAI12441

    E-Print Network [OSTI]

    Motta, Arthur T.

    -initiated accident (RIA). An RIA may be caused by the ejection of a control rod from the core, which causes a rapid, the survivability of cladding when subject to an RIA after long reactor exposures depends on a combination of: (i of hydrides are major factors in determining the survivability of high burnup cladding during an RIA. Because

  7. astm a351 cn3mn: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (1-106) for use by individual writers and users. 1... American Society for Testing and Materials. Philadelphia 2002-01-01 286 Rayleigh Laser Guide Star Systems: Application to...

  8. Properties of concrete incorporating high volumes of ASTM Class F fly ash

    E-Print Network [OSTI]

    Li, Wei Tung

    1995-01-01T23:59:59.000Z

    to be cost effective. It was shown that about two and half dollars per cubic meter could be saved through savings on portland cement....

  9. Mechanisms Regulating Specification and Maintenance of Pancreatic Cell Fate

    E-Print Network [OSTI]

    Kanji, Murtaza Shabbir

    2013-01-01T23:59:59.000Z

    et al. , SOX9 is required for maintenance of the pancreaticstem cells for tissue maintenance? Cell Cycle, 2004. 3(9):cell specification and maintenance. ” Larry Hillblom Islet

  10. DOE has published the revised 2010 Energy Sector Specific Plan

    Broader source: Energy.gov [DOE]

    The Department of Energy announces the publication of the Energy Sector-Specific Plan: An Annex to the National Infrastructure Protection Plan 2010.

  11. abstracting code specific: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Poster: 4195B656 Abstract Title: Specification of Multiple Ganglion Cell Stimulation Codes for Engineering Websites Summary: ProgramPoster: 4195B656 Abstract Title:...

  12. apomorphine-induced context-specific behavioural: Topics by E...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    color detection. Depending on camera settings, illumination, shadows, people Cremers, Daniel 8 BehavioralSystemsCognitive Context-Specific Grasp Movement Representation in...

  13. Specific Effects of Fiber Size and Fiber Swelling on Biomass...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Effects of Fiber Size and Fiber Swelling on Biomass Substrate Surface Area and Enzymatic Digestibility. Specific Effects of Fiber Size and Fiber Swelling on Biomass Substrate...

  14. UFAD Commissioning Cart: Design Specifications and Operating Manual

    E-Print Network [OSTI]

    Webster, Tom; Arens, Edward; Anwar, George; Bonnell, J.; Bauman, Fred; Brown, C.

    2007-01-01T23:59:59.000Z

    companion to the UFAD Commissioning Procedures document thatrequirements of the UFAD Commissioning Specifications beingCBE periodically during the commissioning process to support

  15. Crown Ethers Flatten in Graphene for Strong, Specific Binding...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SHARE Crown Ethers Flatten in Graphene for Strong, Specific Binding ORNL discovery holds potential for separations, sensors, batteries, biotech and more This sheet of graphene...

  16. Specific Administrative Controls Review at the Hanford Site with...

    Broader source: Energy.gov (indexed) [DOE]

    the Office of Health, Safety and Security, participated in the Office of Environmental Management Office of Standards and Quality Assurance, EM-23, review of Specific...

  17. Site-Specific Raman Spectroscopy and Chemical Dynamics of Nanoscale...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Raman Spectroscopy and Chemical Dynamics of Nanoscale Interstitial Systems. Site-Specific Raman Spectroscopy and Chemical Dynamics of Nanoscale Interstitial Systems. Abstract:...

  18. New IEC Specifications Help Define Wind Plant Performance Reporting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    working with the International Electrotechnical Commission (IEC) Committee on wind turbine availability to develop three specifications for IEC-61400-26-the standard that...

  19. Transuranic Waste Processing Center Oak Ridge Site Specific...

    Office of Environmental Management (EM)

    Transuranic Waste Processing Update Oak Ridge Site Specific Advisory Board May 14, 2014 Laura Wilkerson, Portfolio Federal Project Director Karen Deacon, Deputy Federal Project...

  20. Quantitative Site-specific Reactivity Profiling of S-Nitrosylation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Profiling of S-Nitrosylation in Mouse Skeletal Muscle Using Cysteinyl Peptide Enrichment Quantitative Site-specific Reactivity Profiling of S-Nitrosylation in Mouse Skeletal...

  1. Fracture toughness tests of structural weldments

    E-Print Network [OSTI]

    Weir, Breanna M

    2013-02-22T23:59:59.000Z

    -tip opening displacement (CTOD). The American Society for Testing and Materials has recently proposed an annex to ASTM E1290-93 revising the current CTOD standard specifically for weld use. This paper focuses on the application of the ASTM annex to steel...

  2. Fracture toughness tests of structural weldments 

    E-Print Network [OSTI]

    Weir, Breanna M

    2013-02-22T23:59:59.000Z

    -tip opening displacement (CTOD). The American Society for Testing and Materials has recently proposed an annex to ASTM E1290-93 revising the current CTOD standard specifically for weld use. This paper focuses on the application of the ASTM annex to steel...

  3. Technical specifications for mechanical recycling of agricultural plastic waste

    SciTech Connect (OSTI)

    Briassoulis, D., E-mail: briassou@aua.gr; Hiskakis, M.; Babou, E.

    2013-06-15T23:59:59.000Z

    Highlights: • Technical specifications for agricultural plastic wastes (APWs) recycling proposed. • Specifications are the base for best economical and environmental APW valorisation. • Analysis of APW reveals inherent characteristics and constraints of APW streams. • Thorough survey on mechanical recycling processes and industry as it applies to APW. • Specifications for APW recycling tested, adjusted and verified through pilot trials. - Abstract: Technical specifications appropriate for the recycling of agricultural plastic wastes (APWs), widely accepted by the recycling industry were developed. The specifications establish quality standards to be met by the agricultural plastics producers, users and the agricultural plastic waste management chain. They constitute the base for the best economical and environmental valorisation of the APW. The analysis of the APW streams conducted across Europe in the framework of the European project “LabelAgriWaste” revealed the inherent characteristics of the APW streams and the inherent constraints (technical or economical) of the APW. The APW stream properties related to its recycling potential and measured during pilot trials are presented and a subsequent universally accepted simplified and expanded list of APW recycling technical specifications is proposed and justified. The list includes two sets of specifications, applied to two different quality categories of recyclable APW: one for pellet production process (“Quality I”) and another one for plastic profile production process (“Quality II”). Parameters that are taken into consideration in the specifications include the APW physical characteristics, contamination, composition and degradation. The proposed specifications are focused on polyethylene based APW that represents the vast majority of the APW stream. However, the specifications can be adjusted to cover also APW of different materials (e.g. PP or PVC) that are found in very small quantities in protected cultivations in Europe. The adoption of the proposed specifications could transform this waste stream into a labelled commodity traded freely in the market and will constitute the base for the best economical and environmental valorisation of the APW.

  4. Formal Specification and Testing of a Management Architecture

    E-Print Network [OSTI]

    Derrick, John

    . The aim of our work is to test the applicability of FDTs to managed object specification by formallyFormal Specification and Testing of a Management Architecture G. P. A. Fernandes \\Lambda and J systems management to supply and maintain services required by users has led to a demand for management

  5. Revising Specifications with CTL Properties using Bounded Model Checking

    E-Print Network [OSTI]

    Finger, Marcelo

    Revising Specifications with CTL Properties using Bounded Model Checking No Author Given that inconsistencies arise between the formal specification and some desired property. Belief Revision deals. In this paper, we propose the use of belief revision techniques in order to deal with inconsistencies in formal

  6. TESLA: A Formally Defined Event Specification Language Gianpaolo Cugola

    E-Print Network [OSTI]

    Cugola, Gianpaolo

    TESLA: A Formally Defined Event Specification Language Gianpaolo Cugola Dip. di Elettronica e to clearly state how the system should behave. Moving from these premises, we present TESLA, a complex event specification language. Each TESLA rule considers incoming data items as notifi- cations of events and defines

  7. The Dangerous "All" in Specifications Daniel M. Berry Erik Kamsties

    E-Print Network [OSTI]

    Berry, Daniel M.

    The Dangerous "All" in Specifications Daniel M. Berry Erik Kamsties Computer Science Department, are dangerous because they are usually not true. Jackson and Zave provide a classification of requirement specification sentences into indicative and optative sen- tences. It is observed that the dangerous sentences

  8. UPC Language and Library Specifications, Version 1.3

    SciTech Connect (OSTI)

    UPC Consortium; Bonachea, Dan; Funck, Gary

    2013-11-16T23:59:59.000Z

    UPC is an explicitly parallel extension to the ISO C 99 Standard. UPC follows the partitioned global address space programming model. This document is the formal specification for the UPC language and library syntax and semantics, and supersedes prior specification version 1.2 (LBNL-59208).

  9. Atrioventricular blood flow simulation based on patient-specific data

    E-Print Network [OSTI]

    Sussman, Mark

    Atrioventricular blood flow simulation based on patient-specific data Viorel Mihalef1 , Dimitris blood flow in- side the heart, usable with geometric models of the heart from patient- specific data. The method is geared toward realistic simulation of blood flow, taking into account not only heart wall

  10. Mining API Error-Handling Specifications from Source Code

    E-Print Network [OSTI]

    Xie, Tao

    Mining API Error-Handling Specifications from Source Code Mithun Acharya and Tao Xie Department it difficult to mine error-handling specifications through manual inspection of source code. In this paper, we, without any user in- put. In our framework, we adapt a trace generation technique to distinguish

  11. Nucleotide Specificity versus Complex Heterogeneity in Exonuclease Activity Measurements

    E-Print Network [OSTI]

    Enderlein, Jörg

    Nucleotide Specificity versus Complex Heterogeneity in Exonuclease Activity Measurements Jo activity is nucleotide-dependent, and that a fluorescent label bound to a nucleotide significantly slows are fluorescently labeled at two specific sites in the nucleotide sequence (positions 5 and 38 from the free end

  12. ENES 100 Introduction to Engineering Design Hovercraft Product Specifications

    E-Print Network [OSTI]

    Jacob, Bruce

    requirements (a) The use of internal combustion engines (gas and glow fuel engines) is prohibited. (bENES 100 Introduction to Engineering Design Hovercraft Product Specifications HC_PS_005 Rev. A, 28 to Engineering Design Hovercraft Product Specifications HC_PS_005 Rev. A, 28 August 2008 Figure 1: The test

  13. ENES 100 Introduction to Engineering Design Hovercraft Product Specifications

    E-Print Network [OSTI]

    Jacob, Bruce

    requirements (a) The use of internal combustion engines (gas and glow fuel engines) is prohibited. (bENES 100 Introduction to Engineering Design Hovercraft Product Specifications HC_PS_004 Rev. A, 22 100 Introduction to Engineering Design Hovercraft Product Specifications HC_PS_004 Rev. A, 22 January

  14. NDetermin: Inferring Nondeterministic Sequential Specifications for Parallelism Correctness

    E-Print Network [OSTI]

    Necula, George

    NDetermin: Inferring Nondeterministic Sequential Specifications for Parallelism Correctness Jacob and that copies bear this notice and the full citation on the first page. To copy otherwise, to republish, to post;NDetermin: Inferring Nondeterministic Sequential Specifications for Parallelism Correctness Jacob Burnim

  15. Streams of Steam The Steam Boiler Specification Case Study

    E-Print Network [OSTI]

    Streams of Steam ­ The Steam Boiler Specification Case Study Manfred Broy, Franz Regensburger-tuned con- cepts of FOCUS by its application of the requirements specification of a steam boiler, see [Abr96-studies. In this context, applying FOCUS to the steam boiler case study ([Abr96]) led us to a couple of questions re- #12

  16. ALSEP TECHNICAL SPECIFICATION Contract NAS 9-5829

    E-Print Network [OSTI]

    Rathbun, Julie A.

    . ", ., ,I',: , t "' ,- EXHIBIT 13 ALSEP TECHNICAL SPECIFICATION Contract NAS 9-5829 -~ t. ".' . THE MncfYCORPORATION BENDIX SYSTEMS DIVISION' ANN ARBOR MICHIGAN' #12;EXHIBIT B ALSEP TECHNICAL SPECIFICATION Contract NAS 9-5829 March 10, 1966 #12;TABLE OF CONTENTS 1.0 SCOPE 1.1 Scope 1. 2 Associated

  17. average specific absorption: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    average specific absorption First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Original Research Specific...

  18. Double Shell Tank (DST) Transfer Piping Subsystem Specification

    SciTech Connect (OSTI)

    GRAVES, C.E.

    2000-03-22T23:59:59.000Z

    This specification establishes the performance requirements and provides references to the requisite codes and standards to be applied during design of the Double-Shell Tank (DST) Transfer Piping Subsystem that supports the first phase of Waste Feed Delivery. This specification establishes the performance requirements and provides references to the requisite codes and standards to be applied during design of the Double-Shell Tank (DST) Transfer Piping Subsystem that supports the first phase of waste feed delivery. This subsystem transfers waste between transfer-associated structures (pits) and to the River Protection Project (RPP) Privatization Contractor Facility where it will be processed into an immobilized waste form. This specification is intended to be the basis for new projects/installations (W-521, etc.). This specification is not intended to retroactively affect previously established project design criteria without specific direction by the program.

  19. Results from Development of Model Specifications for Multifamily Energy Retrofits

    SciTech Connect (OSTI)

    Brozyna, K.

    2012-08-01T23:59:59.000Z

    Specifications, modeled after CSI MasterFormat, provide the trade contractors and builders with requirements and recommendations on specific building materials, components and industry practices that comply with the expectations and intent of the requirements within the various funding programs associated with a project. The goal is to create a greater level of consistency in execution of energy efficiency retrofits measures across the multiple regions a developer may work. IBACOS and Mercy Housing developed sample model specifications based on a common building construction type that Mercy Housing encounters.

  20. Model Specification for Networked Outdoor Lighting Control Systems

    Broader source: Energy.gov [DOE]

    The DOE Municipal Solid-State Street Lighting Consortium's Model Specification for Networked Outdoor Lighting Control Systems is a tool designed to help cities, utilities, and other local agencies...

  1. Oak Ridge Site Specific Advisory Board Contacts | Department...

    Office of Environmental Management (EM)

    Advisory Board Contacts Mailing Address Oak Ridge Site Specific Advisory Board P.O. Box 2001, EM-91 Oak Ridge, TN 37831 Phone Numbers (865) 241-4583, (865) 241-4584 (800) 382-6938,...

  2. PROGRAMME SPECIFICATION POSTGRADUATE PROGRAMMES Programme name Economic Evaluation in Healthcare

    E-Print Network [OSTI]

    Weyde, Tillman

    1 PROGRAMME SPECIFICATION ­ POSTGRADUATE PROGRAMMES KEY FACTS Programme name Economic Evaluation PROGRAMME SUMMARY This programme is designed to produce professionals who can undertake economic evaluation bases for economic evaluation and in advanced quantitative methods relevant to healthcare decision

  3. Specific Examples of Global Activities Environmental assessment in Azerbaijan

    E-Print Network [OSTI]

    , global warming, and global entrepreneurship. Discovery Park works syner- gistically with the Office competitiveness, global energy security, global warming, and global entrepreneurship. Discovery Park worksSpecific Examples of Global Activities · Environmental assessment in Azerbaijan · Study abroad

  4. Tissue-specific gene silencing monitored in circulating RNA

    E-Print Network [OSTI]

    Sehgal, Alfica

    Pharmacologic target gene modulation is the primary objective for RNA antagonist strategies and gene therapy. Here we show that mRNAs encoding tissue-specific gene transcripts can be detected in biological fluids and that ...

  5. Standard specification for sintered (Uranium-Plutonium) dioxide pellets

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2001-01-01T23:59:59.000Z

    1.1 This specification covers finished sintered and ground (uranium-plutonium) dioxide pellets for use in thermal reactors. It applies to uranium-plutonium dioxide pellets containing plutonium additions up to 15 % weight. This specification may not completely cover the requirements for pellets fabricated from weapons-derived plutonium. 1.2 This specification does not include (1) provisions for preventing criticality accidents or (2) requirements for health and safety. Observance of this specification does not relieve the user of the obligation to be aware of and conform to all applicable international, federal, state, and local regulations pertaining to possessing, processing, shipping, or using source or special nuclear material. Examples of U.S. government documents are Code of Federal Regulations Title 10, Part 50Domestic Licensing of Production and Utilization Facilities; Code of Federal Regulations Title 10, Part 71Packaging and Transportation of Radioactive Material; and Code of Federal Regulations Tit...

  6. PROGRAMME SPECIFICATION Programme name Mathematical Science with Computer Science

    E-Print Network [OSTI]

    Weyde, Tillman

    Mathematical Science with Computer Science with Placement Award MMath School School of Engineering1 PROGRAMME SPECIFICATION KEY FACTS Programme name Mathematical Science with Computer Science and computer science. In mathematics you will focus in particular on applied mathematics, although you

  7. Double Shell Tank (DST) Monitor and Control Subsystem Specification

    SciTech Connect (OSTI)

    BAFUS, R.R.

    2000-11-03T23:59:59.000Z

    This specification revises the performance requirements and provides references to the requisite codes and standards to be applied during design of the Double-Shell Tank (DST) Monitor and Control Subsystem that supports the first phase of Waste Feed Delivery.

  8. Double Shell Tank (DST) Process Waste Sampling Subsystem Specification

    SciTech Connect (OSTI)

    RASMUSSEN, J.H.

    2000-05-03T23:59:59.000Z

    This specification establishes the performance requirements and provides references to the requisite codes and standards to be applied to the Double-Shell Tank (DST) Process Waste Sampling Subsystem which supports the first phase of Waste Feed Delivery.

  9. Concise specifications of locally optimal code generators Andrew W. Appel

    E-Print Network [OSTI]

    Appel, Andrew W.

    , so it can be much more concise. Twig specifications for the VAX and MC68020 are described. The instruction sets of the DEC VAX and Motorola 68020 are used as a illustrative examples. The VAX architecture

  10. Using XML to Build Consistency Rules for Distributed Specifications

    E-Print Network [OSTI]

    Finkelstein, Anthony

    Using XML to Build Consistency Rules for Distributed Specifications Andrea Zisman Wolfgang Emmerich)20 76794413 a.zisman@soi.city.ac.uk {w.emmerich | a.finkelstein}@cs.ucl.ac.uk ABSTRACT The work presented

  11. DNA topology confers sequence specificity to nonspecific architectural proteins

    E-Print Network [OSTI]

    Swigon, David

    DNA topology confers sequence specificity to nonspecific architectural proteins Juan Weia , Luke of DNA change the disorder found in chain molecules randomly decorated by nonspecific, architectural, counter to expectations, in greater quantities and at particular sites along simulated DNA minicircles

  12. Sequence-specific synthesis with artificial molecular machines 

    E-Print Network [OSTI]

    Papmeyer, Marcus

    2014-06-28T23:59:59.000Z

    Sequence-specific synthesis is essential to life. In nature, information-rich polymers such as polynucleotides, polypeptides and polysaccharides are responsible for virtually all vital processes. As opposed to nature’s ...

  13. Spatially localized generation of nucleotide sequence-specific DNA damage

    E-Print Network [OSTI]

    Boxer, Steven G.

    Spatially localized generation of nucleotide sequence-specific DNA damage Dennis H. Oh* , Brett A- neously manipulated at the nucleotide level and in three dimen- sions. This approach for targeting

  14. Size dependent specific surface area of nanoporous film assembled...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and compared with the calculated data. Citation: Antony J, J Nutting, DR Baer, D Meyer, AM Sharma, and Y Qiang.2006."Size dependent specific surface area of nanoporous film...

  15. The specification and patterning of the Drosophila egg chamber

    E-Print Network [OSTI]

    Lan, Lan

    2010-12-07T23:59:59.000Z

    The generation of cell polarity through the localization of specific mRNAs and proteins to discrete subcellular sites is fundamental to asymmetric cell division, tissue morphogenesis, cell migration, and most other ...

  16. Inferring Gene Family Histories in Yeast Identifies Lineage Specific Expansions

    E-Print Network [OSTI]

    Ames, Ryan M.; Money, Daniel; Lovell, Simon C.

    2014-06-12T23:59:59.000Z

    The complement of genes found in the genome is a balance between gene gain and gene loss. Knowledge of the specific genes that are gained and lost over evolutionary time allows an understanding of the evolution of biological ...

  17. The Case for ApplicationSpecific Operating Systems

    E-Print Network [OSTI]

    Anderson, Tom

    The Case for Application­Specific Operating Systems Thomas E. Anderson Division of Computer Science processors, higher bandwidth networks, and larger amounts of pri­ mary, secondary, and tertiary storage

  18. The sleep and mood correlates of a specific dietary intervention

    E-Print Network [OSTI]

    Steede, Kevin Kavanaugh

    1985-01-01T23:59:59.000Z

    THE SLEEP AND MOOD CORRELATES OF A SPECIFIC DIETARY INTERVENTION A Thesis by KEVIN KAVANAUGH STEEDE Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... May 1985 Major Subject: Psychology THE SLEEP AND HOOD CORRELATES OF A SPECIFIC DIETARY INTERVENTION A Thesis by KEVIN KAVANAUGH STEEDE Approved as to style and content by: Lar Christensen (Chai n of Committee) Ludy' . Benjamin Jr. (Member) U...

  19. General and specific combining ability in a beef cattle herd

    E-Print Network [OSTI]

    Brown, James Edmond

    1967-01-01T23:59:59.000Z

    GENERAL AND SPECIFIC COMBINING ABILITV IN A BEEF CATTLE HERD A Thesis By JAMES EDMOND BROWN Submitted to the Graduate College of the Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE January... 1967 Major Sub)ect: Animal Breeding GENERAL AND SPECIFIC COMBINING ABILITY IN A BEEF CATTLE HERD A Thesis By JAMES EDMOND BROWN Approved as to style and content by: (Chairman of Committee) (Head of Department) (M ' ber) I /~ (Member) (Member...

  20. Unique ER Cistromes Control Cell Type-Specific Gene Regulation

    E-Print Network [OSTI]

    Brown, Myles

    -specific E2 regulation of gene expression in MCF7 and U2OS- ER cells, we compared the ER binding sites on DNA a critical role in defining the ER cistrome in MCF7 cells, it is not expressed in U2OS-ER cells, and forkhead-specific effects, however, remains to be explained. We have compared the gene expres- sion profile of the MCF7

  1. A particulate non-specific alkaline phosphatase in Saccharomyces cerevisiae

    E-Print Network [OSTI]

    Mitchell, James Kent

    1980-01-01T23:59:59.000Z

    utant Strain DO4-AP2 24 24 24 30 31 36 39 41 43 43 43 46 46 51 51 TABLE OF CONTENTS (Continued) Isoelectric Focussing Page 53 IV. Discussion and Conclusions 56 V. References 65 VI, Vita 68 LIST OF TABLES Tables Page 1.... Fluorescent Readings of 4-methylumbelliferone 25 2. Fluorescent Readings of a-naphthol 25 3. Substrate Specificity of Particulate Alkaline Phosohatase 40 Intracellular Localization of Particulate Alkaline Phos- phatase 45 5. Specific Activity of a...

  2. Standard technical specifications: Babcock and Wilcox Plants. Revision 1

    SciTech Connect (OSTI)

    NONE

    1995-04-01T23:59:59.000Z

    This report documents the results of the combined effort of the NRC and the industry to produce improved Standard Technical Specifications (STS), Revision 1 for Babcock & Wilcox Plants. The changes reflected in Revision 1 resulted from the experience gained from license amendment applications to convert to these improved STS or to adopt partial improvements to existing technical specifications. This NUREG is the result of extensive public technical meetings and discussions between the Nuclear Regulatory Commission (NRC) staff and various nuclear power plant licensees, Nuclear Steam Supply System (NSSS) Owners Groups, NSSS vendors, and the Nuclear Energy Institute (NEI). The improved STS were developed based on the criteria in the Final Commission Policy Statement on Technical Specifications Improvements for Nuclear Power Reactors, dated July 22, 1993. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. Volume 3 contains the Bases for Sections 3.4--3.9 of the improved STS.

  3. Double Shell Tank (DST) Transfer Pump Subsystem Specification

    SciTech Connect (OSTI)

    LESHIKAR, G.A.

    2000-03-27T23:59:59.000Z

    This specification establishes the performance requirements and provides references to the requisite codes and standards to be applied to the Double-Shell Tank (DST) Transfer Pump Subsystem which supports the first phase of Waste Feed Delivery (WFD). This specification establishes the performance requirements and provides the references to the requisite codes and standards to be applied during the design of the DST Transfer Pump Subsystem that supports the first phase of (WFD). The DST Transfer Pump Subsystem consists of a pump for supernatant and or slurry transfer for the DSTs that will be retrieved during the Phase 1 WFD operations. This system is used to transfer low-activity waste (LAW) and high-level waste (HLW) to designated DST staging tanks. It also will deliver blended LAW and HLW feed from these staging tanks to the River Protection Project (RPP) Privatization Contractor facility where it will be processed into an immobilized waste form. This specification is intended to be the basis for new projects/installations (W-521, etc.). This specification is not intended to retroactively affect previously established project design criteria without specific direction by the program.

  4. System specification for the integrated monitoring and surveillance system

    SciTech Connect (OSTI)

    NONE

    1997-09-01T23:59:59.000Z

    This System Specification establishes the requirements for the Plutonium Focus Area (PFA) Integrated Monitoring and Surveillance System (IMSS). In this document, ``Integrated Monitoring and Surveillance System`` is used to describe the concept of integrated sensors, computers, personnel, and systems that perform the functions of sensing conditions, acquiring data, monitoring environmental safety and health, controlling and accounting for materials, monitoring material stability, monitoring container integrity, transferring data, and analyzing, reporting, and storing data. This concept encompasses systems (e.g. sensors, personnel, databases, etc.) that are already in place at the sites but may require modifications or additions to meet all identified surveillance requirements. The purpose of this System Specification is to provide Department of Energy (DOE) sites that store plutonium materials with a consolidation of all known requirements for the storage and surveillance of 3013 packages of stabilized plutonium metals and oxides. This compilation may be used (1) as a baseline for surveillance system design specifications where 3013 packages of stabilized plutonium metals and oxides will be stored and monitored; (2) as a checklist for evaluating existing surveillance systems to ensure that all requirements are met for the storage and surveillance of 3013 packages of stabilized plutonium metals and oxides; and (3) as a baseline for preparing procurement specifications tailored for site specific storage and surveillance of 3013 packages of stabilized plutonium metals and oxides.

  5. Defect specific maintenance of SG tubes -- How safe is it?

    SciTech Connect (OSTI)

    Cizelj, L.; Mavko, B.; Dvorsek, T. [Jozef Stefan Institute, Ljubljana (Slovenia)

    1997-02-01T23:59:59.000Z

    The efficiency of the defect specific plugging criterion for outside diameter stress corrosion cracking at tube support plates is assessed. The efficiency is defined by three parameters: (1) number of plugged tubes, (2) probability of steam generator tube rupture and (3) predicted accidental leak rate through the defects. A probabilistic model is proposed to quantify the probability of tube rupture, while procedures available in literature were used to define the accidental leak rates. The defect specific plugging criterion was then compared to the performance of traditional (45%) plugging criterion using realistic data from Krsko nuclear power plant. Advantages of the defect specific approach over the traditional one are clearly shown. Some hints on the optimization of safe life of steam generator are also given.

  6. Domain-specific Web Service Discovery with Service Class Descriptions

    SciTech Connect (OSTI)

    Rocco, D; Caverlee, J; Liu, L; Critchlow, T J

    2005-02-14T23:59:59.000Z

    This paper presents DynaBot, a domain-specific web service discovery system. The core idea of the DynaBot service discovery system is to use domain-specific service class descriptions powered by an intelligent Deep Web crawler. In contrast to current registry-based service discovery systems--like the several available UDDI registries--DynaBot promotes focused crawling of the Deep Web of services and discovers candidate services that are relevant to the domain of interest. It uses intelligent filtering algorithms to match services found by focused crawling with the domain-specific service class descriptions. We demonstrate the capability of DynaBot through the BLAST service discovery scenario and describe our initial experience with DynaBot.

  7. Method To Identify Specific Inhibiutors Of Imp Dehydrogenase

    DOE Patents [OSTI]

    Collart, Frank R. (Bolingbrook, IL); Huberman, Eliezer (LaGrange, IL)

    2000-11-28T23:59:59.000Z

    This invention relates to methods to identify specific inhibitors of the purine nucleotide synthesis enzyme, IMP dehydrogenase (IMPDH). IMPDH is an essential enzyme found in all free-living organisms from humans to bacteria and is an important therapeutic target. The invention allows the identification of specific inhibitors of any IMPDH enzyme which can be expressed in a functional form in a recombinant host cell. A variety of eukaryotic or prokaryotic host systems commonly used for the expression of recombinant proteins are suitable for the practice of the invention. The methods are amenable to high throughput systems for the screening of inhibitors generated by combinatorial chemistry or other methods such as antisense molecule production. Utilization of exogenous guanosine as a control component of the methods allows for the identification of inhibitors specific for IMPDH rather than other causes of decreased cell proliferation.

  8. PROGRAMME SPECIFICATION Programme name Banking and International Finance

    E-Print Network [OSTI]

    Weyde, Tillman

    1 PROGRAMME SPECIFICATION KEY FACTS Programme name Banking and International Finance Award BSc The BSc (Hons) Banking and International Finance degree provides you with the academic knowledge skills and knowledge in the key areas of banking and international finance, including Financial

  9. Generating Test Data from SOFL Specifications \\Lambda A. Jefferson Offutt

    E-Print Network [OSTI]

    Offutt, Jeff

    Generating Test Data from SOFL Specifications \\Lambda A. Jefferson Offutt ISSE Department, 4A4@cs.hiroshima­cu.ac.jp Abstract Software testing can only be formalized and quantified when a solid basis for test generation can be defined. Tests are commonly generated from the source code, control flow graphs, design representations

  10. Magnetic Wall Climbing Robot for Thin Surfaces with Specific Obstacles

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Magnetic Wall Climbing Robot for Thin Surfaces with Specific Obstacles W. Fischer¹, F. Tâche high magnetic forces The main optimization criterion for this robot was to design it as light@ethz.ch Summary. This paper describes a novel solution to a mobile climbing robot on mag- netic wheels, designed

  11. PROGRAMME SPECIFICATION UNDERGRADUATE PROGRAMMES Programme name Energy Engineering

    E-Print Network [OSTI]

    Weyde, Tillman

    of Systems Reliability and Sustainability. At Part 3 the topics of energy management and renewable energy1 PROGRAMME SPECIFICATION ­ UNDERGRADUATE PROGRAMMES KEY FACTS Programme name Energy Engineering grounding in the skills and science appropriate to the formation of an engineer, as well as developing

  12. PROGRAMME SPECIFICATION POSTGRADUATE PROGRAMMES Programme name Systems and Control Engineering

    E-Print Network [OSTI]

    Weyde, Tillman

    -machine systems. Alongside the traditional role of control theory and engineering, there is a modern trend1 PROGRAMME SPECIFICATION ­ POSTGRADUATE PROGRAMMES KEY FACTS Programme name Systems and Control knowledge in the areas of Systems and Control. The programme addresses the major technological developments

  13. Open Automated Demand Response Communications Specification (Version 1.0)

    SciTech Connect (OSTI)

    Piette, Mary Ann; Ghatikar, Girish; Kiliccote, Sila; Koch, Ed; Hennage, Dan; Palensky, Peter; McParland, Charles

    2009-02-28T23:59:59.000Z

    The development of the Open Automated Demand Response Communications Specification, also known as OpenADR or Open Auto-DR, began in 2002 following the California electricity crisis. The work has been carried out by the Demand Response Research Center (DRRC), which is managed by Lawrence Berkeley National Laboratory. This specification describes an open standards-based communications data model designed to facilitate sending and receiving demand response price and reliability signals from a utility or Independent System Operator to electric customers. OpenADR is one element of the Smart Grid information and communications technologies that are being developed to improve optimization between electric supply and demand. The intention of the open automated demand response communications data model is to provide interoperable signals to building and industrial control systems that are preprogrammed to take action based on a demand response signal, enabling a demand response event to be fully automated, with no manual intervention. The OpenADR specification is a flexible infrastructure to facilitate common information exchange between the utility or Independent System Operator and end-use participants. The concept of an open specification is intended to allow anyone to implement the signaling systems, the automation server or the automation clients.

  14. PROGRAMME SPECIFICATION POSTGRADUATE PROGRAMMES Programme name Global Political Economy

    E-Print Network [OSTI]

    Weyde, Tillman

    PROGRAMME SPECIFICATION ­ POSTGRADUATE PROGRAMMES KEY FACTS Programme name Global Political Economy programme in Global Political Economy at City University, you will engage in advanced study of various MA degree in global political economy with a mixture of core courses covering general concepts

  15. Rate of environmental change determines stress response specificity

    E-Print Network [OSTI]

    Elowitz, Michael

    as to salt (13), calcium (14), heat, and other stresses (15). Bacteria also contain general stress responseRate of environmental change determines stress response specificity Jonathan W. Younga,1 , James C (received for review August 2, 2012) Cells use general stress response pathways to activate diverse tar- get

  16. INTRODUCTION The accumulation of osmolytes, specifically `compatible' osmolytes,

    E-Print Network [OSTI]

    Hammock, Bruce D.

    4615 INTRODUCTION The accumulation of osmolytes, specifically `compatible' osmolytes, is a key and Ferraris, 2008). Various molecular pathways relating to osmolyte accumulation, including cotransporter activity and biosynthesis enzymes, have been shown to be induced in order to accumulate myo-inositol within

  17. Developing a Computer Science-specific Learning Taxonomy

    E-Print Network [OSTI]

    Kent, University of

    152 Developing a Computer Science-specific Learning Taxonomy Ursula Fuller Computing Laboratory@computer.org ABSTRACT Bloom's taxonomy of the cognitive domain and the SOLO taxonomy are being increasingly widely used. This paper reviews the literature on educational taxonomies and their use in computer science education

  18. Specific Functions for ERK/MAPK Signaling during PNS Development

    E-Print Network [OSTI]

    Neuron Article Specific Functions for ERK/MAPK Signaling during PNS Development Jason M. Newbern,1 MAPKs, ERK1/2 and ERK5, in DRG, motor neuron, and Schwann cell development. Surprisingly, many aspects of early DRG and motor neuron devel- opment were found to be ERK1/2 independent, and Erk5 deletion had

  19. Situvis: visualising multivariate context information to evaluate situation specifications

    E-Print Network [OSTI]

    Dobson, Simon

    Situvis: visualising multivariate context information to evaluate situation specifications Adrian K, highly multivariate, and constantly being updated as new readings are recorded. Situations have been. The visualisation of large and complex multivariate data sets, such as those that context-aware system developers

  20. Experimental criticality specifications, update through 1979. Informal report

    SciTech Connect (OSTI)

    Paxton, H.C. (comp.)

    1980-02-01T23:59:59.000Z

    A table of contents for LA-7170-MS is provided, and publications of criticality specifications that appeared in 1978 and 1979 are listed. The table was omitted from the original document. An abstract of the original report appeared in Energy Research Abstracts, Volume 3: 43410.

  1. Page 1 of 5 University of Cambridge: Programme Specifications

    E-Print Network [OSTI]

    de Gispert, Adrià

    Including: Manufacturing Systems Manufacturing Processes Human Resource Management Sales Marketing & NPD, update or amend this programme specification at any time. MPHIL in INDUSTRIAL SYSTEMS MANUFACTURE. Accreditation Details n/a 4. Name of Final Award Master of Philosophy 5. Programme Title Industrial Systems

  2. Page 1 of 5 University of Cambridge: Programme Specifications

    E-Print Network [OSTI]

    de Gispert, Adrià

    Manufacturing Processes Human Resource Management Sales Marketing & NPD Finance (2) Knowledge of Industrial, update or amend this programme specification at any time. MPHIL in INDUSTRIAL SYSTEMS MANUFACTURE. Accreditation Details n/a 4. Name of Final Award Master of Philosophy 5. Programme Title Industrial Systems

  3. Standard specification for nuclear-Grade boron carbide pellets

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2007-01-01T23:59:59.000Z

    1.1 This specification applies to boron carbide pellets for use as a control material in nuclear reactors. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

  4. Standard specification for sintered gadolinium oxide-uranium dioxide pellets

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2008-01-01T23:59:59.000Z

    1.1 This specification is for finished sintered gadolinium oxide-uranium dioxide pellets for use in light-water reactors. It applies to gadolinium oxide-uranium dioxide pellets containing uranium of any 235U concentration and any concentration of gadolinium oxide. 1.2 This specification recognizes the presence of reprocessed uranium in the fuel cycle and consequently defines isotopic limits for gadolinium oxide-uranium dioxide pellets made from commercial grade UO2. Such commercial grade UO2 is defined so that, regarding fuel design and manufacture, the product is essentially equivalent to that made from unirradiated uranium. UO2 falling outside these limits cannot necessarily be regarded as equivalent and may thus need special provisions at the fuel fabrication plant or in the fuel design. 1.3 This specification does not include (1) provisions for preventing criticality accidents or (2) requirements for health and safety. Observance of this specification does not relieve the user of the obligation to be aw...

  5. Standard Specification for Nuclear Grade Zirconium Oxide Pellets

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2009-01-01T23:59:59.000Z

    1.1 This specification applies to pellets of stabilized zirconium oxide used in nuclear reactors. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

  6. Conceptual modelling for domain specific document description and retrieval

    E-Print Network [OSTI]

    and are applied in the tasks of describing and retrieving documents, within cooperative document management settings, where the users themselves have to perform the document management tasks they need in orderConceptual modelling for domain specific document description and retrieval - An approach

  7. Balancing Generality and Specificity in Document Management Systems

    E-Print Network [OSTI]

    Edwards, Keith

    Balancing Generality and Specificity in Document Management Systems W. Keith Edwards and Anthony La-purpose applications that operate on that document. KEYWORDS: document management, user interfaces, extensible. Our desktop tools are specialized to match our document management tasks and have increased

  8. Structured Language for Specifications of Quantitative Requirements Mario Dal Cin

    E-Print Network [OSTI]

    Fey, Dietmar

    are derived from risk measures. Then, the analysis gives useful information to improve system performance and to reduce risk. However, as computer-based analysis deals with more complex system behavior a rigorousStructured Language for Specifications of Quantitative Requirements Mario Dal Cin University

  9. Specific-heat discontinuity in impure two-band superconductors

    E-Print Network [OSTI]

    Mishonov, TM; Penev, ES; Indekeu, JO; Pokrovsky, Valery L.

    2003-01-01T23:59:59.000Z

    at the critical temperature T-c decreases with increasing disorder, its ratio to the normal-state specific heat at T-c increases and slowly converges to the isotropic value. For strong disorder the deviation from the isotropic value is proportional to the elastic...

  10. Guide Specification for Highway Construction Texturing Concrete Pavement for

    E-Print Network [OSTI]

    Guide Specification for Highway Construction Texturing Concrete Pavement for Reduced Tire/Pavement Noise using Diamond Grinding Designation: CPSCP GS 1-11 (rev 3/1/2011) National Concrete Pavement for Highway Construction Texturing Concrete Pavement for Reduced Tire/Pavement Noise using Diamond Grinding

  11. Post-doctoral Fellow Soil and Water Conservation Position specification

    E-Print Network [OSTI]

    , especially the assessment of the impact of soil conservation and water harvesting interventions. - DesignPost-doctoral Fellow Soil and Water Conservation Position specification Internationally Recruited Position (PDF Level) Director, Integrated Water and Land Management Program (IWLMP) Reports to: 20 October

  12. PROGRAMME SPECIFICATION Programme name Mathematical Science with Computer Science

    E-Print Network [OSTI]

    Weyde, Tillman

    Mathematical Science with Computer Science with Placement Award BSc (Hons) School School of Engineering by appropriate methods. acquire an ability to apply mathematics and computational techniques to real world #121 PROGRAMME SPECIFICATION KEY FACTS Programme name Mathematical Science with Computer Science

  13. The Specification and Execution of Heterogeneous Synchronous Reactive Systems

    E-Print Network [OSTI]

    The Specification and Execution of Heterogeneous Synchronous Reactive Systems by Stephen Anthony in Engineering---Electrical Engineering and Computer Sciences in the GRADUATE DIVISION of the UNIVERSITY of Heterogeneous Synchronous Reactive Systems Copyright ã 1997 by Stephen Anthony Edwards #12; Abstract

  14. Student Health Insurance Designed Specifically for the Students of

    E-Print Network [OSTI]

    Rhode Island, University of

    , may not meet the minimum standards required by the health care reform law for the restrictions on anStudent Health Insurance Designed Specifically for the Students of The University of Rhode Island to August 31, 2014 ``Your student health insurance coverage, offered by Monumental Life Insurance Company

  15. TEST RESULT ANALYSIS WITH RESPECT TO FORMAL SPECIFICATIONS

    E-Print Network [OSTI]

    von Bochmann, Gregor

    TEST RESULT ANALYSIS WITH RESPECT TO FORMAL SPECIFICATIONS Gregor v. BOCHMANN and Omar B. BELLAL Université de Montréal Montréal, Canada Abstract: There are two aspects to testing: (1) the selection of appropriate test inputs and (2) the analysis of the observed interactions of the implementation under test

  16. Component-based Specification of Software Architecture Constraints

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    engineering provides for develop- ers the ability to easily reuse and assemble software entities to build phase of the software lifecycle. They propose to de- velopers to explicit, in a structured way, designComponent-based Specification of Software Architecture Constraints Chouki Tibermacine LIRMM, CNRS

  17. Glucose conjugation for the specific targeting and treatment of cancer

    E-Print Network [OSTI]

    Hergenrother, Paul J.

    Glucose conjugation for the specific targeting and treatment of cancer Emilia C. Calvaresia and Paul J. Hergenrother*ab Cancers of diverse origins exhibit marked glucose avidity and high rates has led to an interest in targeting it for cancer therapy. One promising strategy for such targeting

  18. GDCT Initialization File [gdct.ini] Format Specification Guide

    E-Print Network [OSTI]

    Rosebrugh, Robert

    GDCT Initialization File [gdct.ini] Format Specification Guide Written By: Jeremy Bradbury June 22, 2000 Below is the layout of the gdct.ini file. It is important to note the following: · If the gdct.ini to represent that a file does not exist under the "Recent Files" section of the gdct.ini file. [Internal

  19. Remote Control and Receiver-Transceiver Specifications and

    E-Print Network [OSTI]

    Rajamani, Sriram K.

    Remote Control and Receiver- Transceiver Specifications and Requirements for Windows Media Center hardware vendors (IHVs) and PC OEM partners who want to create remote control and receiver device combinations that decode input from the remote control for Windows Media Center. This document provides details

  20. Architectural Considerations for Application-Specific Counterflow Pipelines

    E-Print Network [OSTI]

    Childers, Bruce

    a new pipeline organization called the Counterflow Pipeline (CFP). This paper evaluates CFP design to an application can be constructed automatically. Third, we present measurements that evaluate CFP design tradeArchitectural Considerations for Application-Specific Counterflow Pipelines Bruce R. Childers, Jack

  1. First Class Futures: Specification and implementation of Update Strategies

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    useful in some design patterns for concurrency, such as master-worker and pipeline. inria-00544594 languages, futures, update strategies 1 Introduction Futures are language constructs that improve, specific language constructs are necessary to create the futures and to fetch the result. Transparent

  2. Rapid communication Identification of a Crohn's disease specific

    E-Print Network [OSTI]

    Perreault, Jean-Pierre

    to be due to a combination of factors involving diet, genetic background, immunological responses presented antigen, in individuals with a particular genetic back- ground may be involved in the lack that of their respective proteins appear to be useful as specific markers for unequivocally distinguishing Crohn's disease

  3. Migrating a Domain-Specific Modeling Infrastructure to MDA Technology

    E-Print Network [OSTI]

    van Deursen, Arie

    Migrating a Domain-Specific Modeling Infrastructure to MDA Technology Duncan Doyle1,2, Hans Geers2 be migrated to models conform the MDA, in order to benefit from the range of MDA standards. We describe of the lessons learned. 1 Introduction The MDA promise of model-driven development is becoming a reality

  4. Software Requirements Specification Verifiable Fuel Cycle Simulation (VISION) Model

    SciTech Connect (OSTI)

    D. E. Shropshire; W. H. West

    2005-11-01T23:59:59.000Z

    The purpose of this Software Requirements Specification (SRS) is to define the top-level requirements for a Verifiable Fuel Cycle Simulation Model (VISION) of the Advanced Fuel Cycle (AFC). This simulation model is intended to serve a broad systems analysis and study tool applicable to work conducted as part of the AFCI (including costs estimates) and Generation IV reactor development studies.

  5. Catalytic Domain of Phosphoinositide-specific Phospholipase C (PLC)

    E-Print Network [OSTI]

    Williams, Roger L.

    Catalytic Domain of Phosphoinositide-specific Phospholipase C (PLC) MUTATIONAL ANALYSIS OF RESIDUES WITHIN THE ACTIVE SITE AND HYDROPHOBIC RIDGE OF PLC 1* (Received for publication, November 20, 1997 Institute, University of Dundee, Dundee DD1 4HN, United Kingdom Structural studies of phospholipase C 1 (PLC

  6. Parameterized Specification and Verification of PLC Systems in Coq

    E-Print Network [OSTI]

    Boyer, Edmond

    Parameterized Specification and Verification of PLC Systems in Coq Hai Wan D.CST, Tsinghua and verify PLC software systems with the theorem proving system Coq. Dependent inductive data types are har to cope with this situation, modular development of PLC software is adopted. During the modular

  7. Optimal Control with Weighted Average Costs and Temporal Logic Specifications

    E-Print Network [OSTI]

    Murray, Richard M.

    Optimal Control with Weighted Average Costs and Temporal Logic Specifications Eric M. Wolff Control and Dynamical Systems California Institute of Technology Pasadena, California 91125 Email: ewolff@caltech.edu Ufuk Topcu Control and Dynamical Systems California Institute of Technology Pasadena, California 91125

  8. COMMERCIAL FUEL CARDS RULES & RESPONSIBILITIES: Vehicle Specific Cards

    E-Print Network [OSTI]

    Yang, Zong-Liang

    COMMERCIAL FUEL CARDS ­ RULES & RESPONSIBILITIES: Vehicle Specific Cards A card issued rented by that department. Restrictions · Commercial fuel cards can only be used for fuel and vehicle Services (number of transactions/day, dollars/month, fuel only, etc.) Departmental Responsibilities

  9. Constraint Orientated Specification with CSP and Real Time Temporal Logic

    E-Print Network [OSTI]

    Kent, University of

    Constraint Orientated Specification with CSP and Real Time Temporal Logic Justin Pearson Department Processes (CSP) [Hoa85] and a version of Propositional Temporal Logic (PTL), derived from [Eme90]. CSP. The behaviour of a CSP process is dependent on its environment; it is therefore difficult to assert global

  10. Structure and Emergence of Specific Olfactory Glomeruli in the Mouse

    E-Print Network [OSTI]

    in the olfactory bulb. Connecting 1000 populations of OSNs to the 1800 glomeruli of the mouse bulb poses-expressing OSNs occupies a large surface area of the bulb and coalesces abruptly into a proto- glomerulus systematic examination of OR-specific glomeruli. Key words: olfaction; olfactory system; olfactory bulb; glo

  11. Proposed Specifications for Implementation of Fifth Power Plan

    E-Print Network [OSTI]

    the Washington and Oregon state energy codes, the Seattle Energy Code, the International Energy and Conservation. The proposed specifications are a compilation of the best provisions of energy codes from ASHRAE1 Standard 90 are designed to capture the most stringent energy provisions for each component of the code and reflect

  12. Temporal-Harmonic Specific POD Mode Extraction Gilead Tadmor

    E-Print Network [OSTI]

    Dabiri, John O.

    Temporal-Harmonic Specific POD Mode Extraction Gilead Tadmor and Daniel Bissex Electrical changes the systems mean field changes significantly, as does the leading shedding harmonic4 , once mode pair will capture harmonically rich time dynamics, reflecting a spatial mix of multiple vortical

  13. Open Automated Demand Response Communications Specification (Version 1.0)

    E-Print Network [OSTI]

    Piette, Mary Ann

    2009-01-01T23:59:59.000Z

    Models DRAS Client API Simple REST Services Simple SOAPAPI SPECIFICATIONS 103   Utility Program Operator APIs .. 103   Participant Operator APIs.. 103   DRAS Client APIs 103   Use of Simple REST API and the minimum methods that must be supported are  as described in Section 9.3.1 that are similar for simple REST 

  14. Microchip method for the enrichment of specific DNA sequences

    DOE Patents [OSTI]

    Mirzabekov, A.D.; Lysov, Y.P.; Shick, V.V.; Dubiley, S.A.

    1998-12-22T23:59:59.000Z

    A method for enriching specific genetic material sequences is provided, whereby oligonucleotide molecules complementary to the desired genetic material is first used to isolate the genetic material from a first source of genomic material. Then the genetic material is used as a label to isolate similar genetic sequences from other sources. 4 figs.

  15. Lineage-Specific Gene Expansions in Bacterial and Archaeal Genomes

    E-Print Network [OSTI]

    Jordan, King

    for Biotechnology Information, National Library of Medicine, National Institutes of Health, Bethesda, Maryland 20894. Makarova,1,2,3 John L. Spouge,1 Yuri I. Wolf,1,3 and Eugene V. Koonin1,4 1 National Center. Ohno's particular model of evolution by gene du- plication and, specifically, the role of natural

  16. Grid Database Service Specification Document Identifier: GDSS-0.2

    E-Print Network [OSTI]

    Glasgow, University of

    Grid Database Service Specification Document Identifier: GDSS-0.2 Date: 4th October 2002 Authors of networked resources. The Open Grid Services Architecture (OGSA) extends Web Services with consistent interfaces for creating, managing and exchanging information among Grid Services, which are dynamic

  17. Genomes & Developmental Control Genetic redundancy in endoderm specification within the

    E-Print Network [OSTI]

    Maduro, Morris F.

    , in Caenorhabditis elegans requires a genomic region called the Endoderm Determining Region (EDR). We showed previously that end-1, a gene within the EDR encoding a GATA-type transcription factor, restores endoderm specification to embryos deleted for the EDR and obtained evidence for genetic redundancy in this process. Here

  18. Hybrid Powertrain Design Using a Domain-Specific Modeling Environment

    E-Print Network [OSTI]

    Gray, Jeffrey G.

    Hybrid Powertrain Design Using a Domain- Specific Modeling Environment Wenzhong Gao1 , Sandeep environment is capable of rapidly assimilating new knowledge from experts and design database. Further, it can. As an example, the well-known worldwide recall in Spring 2002 of the BMW 745i was a direct result

  19. Computerised lung sound analysis to improve the specificity of paediatric

    E-Print Network [OSTI]

    Elhilali, Mounya

    Computerised lung sound analysis to improve the specificity of paediatric pneumonia diagnosis that pulmonary pathology can be differentiated from normal using computerised lung sound analysis (CLSA). The authors will record lung sounds from 600 children aged #5 years, 100 each with consolidative pneumonia

  20. OpenADR Specification to Ease Saving Power in Buildings

    ScienceCinema (OSTI)

    Piette, Mary Ann

    2013-05-29T23:59:59.000Z

    A new data model developed by researchers at the Department of Energys Lawrence Berkeley National Laboratory and their colleagues at other universities and in the private sector will help facilities and buildings save power through automated demand response technology, and advance the development of the Smart Grid. http://newscenter.lbl.gov/press-releases/2009/04/27/openadr-specification/

  1. Microchip method for the enrichment of specific DNA sequences

    DOE Patents [OSTI]

    Mirzabekov, Andrei Darievich (Moscow, RU); Lysov, Yuri Petrovich (Moscow, RU); Shick, Valentine Vladimirovich (Hinsdale, IL); Dubiley, Svetlana Alekseevna (Moscow, RU)

    1998-01-01T23:59:59.000Z

    A method for enriching specific genetic material sequences is provided, whereby oligonucleotide molecules complementary to the desired genetic material is first used to isolate the genetic material from a first source of genomic material. Then the genetic material is used as a label to isolate similar genetic sequences from other sources.

  2. Evolving treatment plan quality criteria from institution-specific experience

    SciTech Connect (OSTI)

    Ruan, D.; Shao, W.; DeMarco, J.; Tenn, S.; King, C.; Low, D.; Kupelian, P.; Steinberg, M. [Department of Radiation Oncology, University of California, Los Angeles, California 90095 (United States)

    2012-05-15T23:59:59.000Z

    Purpose: The dosimetric aspects of radiation therapy treatment plan quality are usually evaluated and reported with dose volume histogram (DVH) endpoints. For clinical practicality, a small number of representative quantities derived from the DVH are often used as dose endpoints to summarize the plan quality. National guidelines on reference values for such quantities for some standard treatment approaches are often used as acceptance criteria to trigger treatment plan review. On the other hand, treatment prescription and planning approaches specific to each institution warrants the need to report plan quality in terms of practice consistency and with respect to institution-specific experience. The purpose of this study is to investigate and develop a systematic approach to record and characterize the institution-specific plan experience and use such information to guide the design of plan quality criteria. In the clinical setting, this approach will assist in (1) improving overall plan quality and consistency and (2) detecting abnormal plan behavior for retrospective analysis. Methods: The authors propose a self-evolving methodology and have developed an in-house prototype software suite that (1) extracts the dose endpoints from a treatment plan and evaluates them against both national standard and institution-specific criteria and (2) evolves the statistics for the dose endpoints and updates institution-specific criteria. Results: The validity of the proposed methodology was demonstrated with a database of prostate stereotactic body radiotherapy cases. As more data sets are accumulated, the evolving institution-specific criteria can serve as a reliable and stable consistency measure for plan quality and reveals the potential use of the ''tighter'' criteria than national standards or projected criteria, leading to practice that may push to shrink the gap between plans deemed acceptable and the underlying unknown optimality. Conclusions: The authors have developed a rationale to improve plan quality and consistency, by evolving the plan quality criteria from institution-specific experience, complementary to national standards. The validity of the proposed method was demonstrated with a prototype system on prostate stereotactic body radiotherapy (SBRT) cases. The current study uses direct and indirect DVH endpoints for plan quality evaluation, but the infrastructure proposed here applies to general outcome data as well. The authors expect forward evaluation together with intelligent update based on evidence-based learning, which will evolve the clinical practice for improved efficiency, consistency, and ultimately better treatment outcome.

  3. Behaviour Specification Behaviour Specification

    E-Print Network [OSTI]

    Peters, Dennis

    state. Entry Specifies an activity that occurs when a state becomes active. Exit Specifies an activity of state or execution of exit or entry activities. (Note: this is different from a self transition, which does invoke exit/entry activities.)

  4. Specification and Verification of Context-dependent Services

    E-Print Network [OSTI]

    Ibrahim, Naseem; Mohammad, Mubarak; 10.4204/EPTCS.61.2

    2011-01-01T23:59:59.000Z

    Current approaches for the discovery, specification, and provision of services ignore the relationship between the service contract and the conditions in which the service can guarantee its contract. Moreover, they do not use formal methods for specifying services, contracts, and compositions. Without a formal basis it is not possible to justify through formal verification the correctness conditions for service compositions and the satisfaction of contractual obligations in service provisions. We remedy this situation in this paper. We present a formal definition of services with context-dependent contracts. We define a composition theory of services with context-dependent contracts taking into consideration functional, nonfunctional, legal and contextual information. Finally, we present a formal verification approach that transforms the formal specification of service composition into extended timed automata that can be verified using the model checking tool UPPAAL.

  5. SLALOM: a Language for SLA specification and monitoring

    E-Print Network [OSTI]

    Correia, Anacleto; Amaral, Vasco

    2011-01-01T23:59:59.000Z

    IT services provisioning is usually underpinned by service level agreements (SLAs), aimed at guaranteeing services quality. However, there is a gap between the customer perspective (business oriented) and that of the service provider (implementation oriented) that becomes more evident while defining and monitoring SLAs. This paper proposes a domain specific language (SLA Language for specificatiOn and Monitoring - SLALOM) to bridge the previous gap. The first step in SLALOM creation was factoring out common concepts, by composing the BPMN metamodel with that of the SLA life cycle, as described in ITIL. The derived metamodel expresses the SLALOM abstract syntax model. The second step was to write concrete syntaxes targeting different aims, such as SLA representation in process models. An example of SLALOM's concrete syntax model instantiation for an IT service sup-ported by self-service financial terminals is presented.

  6. Repressor-mediated tissue-specific gene expression in plants

    DOE Patents [OSTI]

    Meagher, Richard B. (Athens, GA); Balish, Rebecca S. (Oxford, OH); Tehryung, Kim (Athens, GA); McKinney, Elizabeth C. (Athens, GA)

    2009-02-17T23:59:59.000Z

    Plant tissue specific gene expression by way of repressor-operator complexes, has enabled outcomes including, without limitation, male sterility and engineered plants having root-specific gene expression of relevant proteins to clean environmental pollutants from soil and water. A mercury hyperaccumulation strategy requires that mercuric ion reductase coding sequence is strongly expressed. The actin promoter vector, A2pot, engineered to contain bacterial lac operator sequences, directed strong expression in all plant vegetative organs and tissues. In contrast, the expression from the A2pot construct was restricted primarily to root tissues when a modified bacterial repressor (LacIn) was coexpressed from the light-regulated rubisco small subunit promoter in above-ground tissues. Also provided are analogous repressor operator complexes for selective expression in other plant tissues, for example, to produce male sterile plants.

  7. Chromosome-specific staining to detect genetic rearrangements

    DOE Patents [OSTI]

    Gray, Joe W.; Pinkel, Daniel; Tkachuk, Douglas; Westbrook, Carol

    2013-04-09T23:59:59.000Z

    Methods and compositions for staining based upon nucleic acid sequence that employ nucleic acid probes are provided. Said methods produce staining patterns that can be tailored for specific cytogenetic analyzes. Said probes are appropriate for in situ hybridization and stain both interphase and metaphase chromosomal material with reliable signals. The nucleic acid probes are typically of a complexity greater than 50 kb, the complexity depending upon the cytogenetic application. Methods and reagents are provided for the detection of genetic rearrangements. Probes and test kits are provided for use in detecting genetic rearrangements, particularly for use in tumor cytogenetics, in the detection of disease related loci, specifically cancer, such as chronic myelogenous leukemia (CML) and for biological dosimetry. Methods and reagents are described for cytogenetic research, for the differentiation of cytogenetically similar but genetically different diseases, and for many prognostic and diagnostic applications.

  8. Generic solar photovoltaic system dynamic simulation model specification.

    SciTech Connect (OSTI)

    Ellis, Abraham; Behnke, Michael Robert; Elliott, Ryan Thomas

    2013-10-01T23:59:59.000Z

    This document is intended to serve as a specification for generic solar photovoltaic (PV) system positive-sequence dynamic models to be implemented by software developers and approved by the WECC MVWG for use in bulk system dynamic simulations in accordance with NERC MOD standards. Two specific dynamic models are included in the scope of this document. The first, a Central Station PV System model, is intended to capture the most important dynamic characteristics of large scale (> 10 MW) PV systems with a central Point of Interconnection (POI) at the transmission level. The second, a Distributed PV System model, is intended to represent an aggregation of smaller, distribution-connected systems that comprise a portion of a composite load that might be modeled at a transmission load bus.

  9. Savannah River Site production reactor technical specifications. K Production Reactor

    SciTech Connect (OSTI)

    NONE

    1996-02-01T23:59:59.000Z

    These technical specifications are explicit restrictions on the operation of the Savannah River Site K Production Reactor. They are designed to preserve the validity of the plant safety analysis by ensuring that the plant is operated within the required conditions bounded by the analysis, and with the operable equipment that is assumed to mitigate the consequences of an accident. Technical specifications preserve the primary success path relied upon to detect and respond to accidents. This report describes requirements on thermal-hydraulic limits; limiting conditions for operation and surveillance for the reactor, power distribution control, instrumentation, process water system, emergency cooling and emergency shutdown systems, confinement systems, plant systems, electrical systems, components handling, and special test exceptions; design features; and administrative controls.

  10. Novel strategies for ultrahigh specific activity targeted nanoparticles

    SciTech Connect (OSTI)

    Zhou, Dong

    2012-12-13T23:59:59.000Z

    We have developed novel strategies optimized for preparing high specific activity radiolabeled nanoparticles, targeting nuclear imaging of low abundance biomarkers. Several compounds have been labeled with F-18 and Cu-64 for radiolabeling of SCK-nanoparticles via Copper(I) catalyzed or copper-free alkyne-azide cyclolization. Novel strategies have been developed to achieve ultrahigh specific activity with administrable amount of dose for human study using copper-free chemistry. Ligands for carbonic anhydrase 12 (CA12), a low abundance extracellular biomarker for the responsiveness of breast cancer to endocrine therapie, have been labeled with F-18 and Cu-64, and one of them has been evaluated in animal models. The results of this project will lead to major improvements in the use of nanoparticles in nuclear imaging and will significantly advance their potential for detecting low abundance biomarkers of medical importance.

  11. Finite quantum dissipation: the challenge of obtaining specific heat

    E-Print Network [OSTI]

    Hänggi, Peter; Talkner, Peter

    2008-01-01T23:59:59.000Z

    We consider a free particle coupled with finite strength to a bath and investigate the evaluation of its specific heat. A harmonic oscillator bath of Drude type with cutoff frequency omega_D is employed to model an ohmic friction force with dissipation strength gamma. Two scenarios for obtaining specific heat are presented. The first one uses the measurement of the kinetic energy of the free particle while the second one is based on the reduced partition function. Both descriptions yield results which are consistent with the Third Law of thermodynamics. Nevertheless, the two methods produce different results that disagree even in their leading quantum corrections at high temperatures. We also consider the regime where the cutoff frequency is smaller than the friction strength, i.e. omega_D1.

  12. Thermal conductivity and specific heat of sorghum grain

    E-Print Network [OSTI]

    Miller, Clinton Frank

    1963-01-01T23:59:59.000Z

    Formation of Test Canister Ice Jacket ~ Sealing Test Canister in Calorimeter. . 43 44 Testing of Samples. Initial Calorimeter Observations. 49 Insertion of Grain Samples into Calorimeter. . . . 50 Final Test Observations Processing of Data. 54... to Contain the Grain Sample 38 for the Determination of Specific Heat 39 12. Top View of Calorimeter. 40 13. Galvanized Iron Cylinder Used to Form the Ice Jacket Around the Test Canister 42 VIII Figures 14. Clamping Device Used to Hold Test Canister...

  13. Thermopolis/East Thermopolis, Wyoming site-specific development analysis

    SciTech Connect (OSTI)

    Burgess-Lyon, P.

    1981-06-01T23:59:59.000Z

    Some of the topics addressed are: what the area is like currently in terms of its land use, economics, and demographics; reservoir potentials; how the reservoir might be developed; marketing the final product; financial assistance for development; the legal aspects of development; and barriers to possible development. Some specific topics discussed are: leasing and permitting; heat exchangers for geothermal heating systems; and corrosion, scaling, and materials selection. (MHR)

  14. Lattice cluster theory for polymer melts with specific interactions

    E-Print Network [OSTI]

    Wen-Sheng Xu; Karl F. Freed

    2014-07-12T23:59:59.000Z

    Despite the long-recognized fact that chemical structure and specific interactions greatly influence the thermodynamic properties of polymer systems, a predictive molecular theory that enables systematically addressing the role of chemical structure and specific interactions has been slow to develop even for polymer melts. While the lattice cluster theory (LCT) provides a powerful vehicle for understanding the influence of various molecular factors, such as monomer structure, on the thermodynamic properties of polymer melts and blends, the application of the LCT has heretofore been limited to the use of the simplest polymer model in which all united atom groups within the monomers of a species interact with a common monomer averaged van der Waals energy. Thus, the description of a compressible polymer melt involves a single van der Waals energy. As a first step towards developing more realistic descriptions to aid in the analysis of experimental data and the design of new materials, the LCT is extended here to treat models of polymer melts in which the backbone and side groups have different interaction strengths, so three energy parameters are present, namely, backbone-backbone, side group-side group, and backbone-side group interaction energies. Because of the great algebraic complexity of this extension, we retain maximal simplicity within this class of models by further specializing this initial study to models of polymer melts comprising chains with poly($n$-$\\alpha$-olefin) structures where only the end segments on the side chains may have different, specific van der Waals interaction energies with the other united atom groups. An analytical expression for the LCT Helmholtz free energy is derived for the new model. Illustrative calculations are presented to demonstrate the degree to which the thermodynamic properties of polymer melts can be controlled by specific interactions.

  15. Crucial role of non-specific interactions in amyloid nucleation

    E-Print Network [OSTI]

    Šari?, An?ela; Chebaro, Yassmine C.; Knowles, Tuomas P. J.; Frenkel, Daan

    2014-12-16T23:59:59.000Z

    in amyloid beta-protein fibril assembly by using small angle neutron scattering. Proceedings of the National Academy of Sciences of the United States of America 99:150–154. [29] Ono K, Condron MM, Teplow DB (2009) Structure- neurotoxicity relationships... preceded fibril nucleation. Although direct measurements of such non-specific inter- actions have been challenging to achieve, the determi- nation of second virial coefficients with advanced light scattering techniques [64] is a promising avenue to ac- cess...

  16. Specific systems studies of battery energy storage for electric utilities

    SciTech Connect (OSTI)

    Akhil, A.A.; Lachenmeyer, L. [Sandia National Labs., Albuquerque, NM (United States); Jabbour, S.J. [Decision Focus, Inc., Mountain View, CA (United States); Clark, H.K. [Power Technologies, Inc., Roseville, CA (United States)

    1993-08-01T23:59:59.000Z

    Sandia National Laboratories, New Mexico, conducts the Utility Battery Storage Systems Program, which is sponsored by the US Department of Energy`s Office of Energy Management. As a part of this program, four utility-specific systems studies were conducted to identify potential battery energy storage applications within each utility network and estimate the related benefits. This report contains the results of these systems studies.

  17. Substrate specificity of Arabidopsis 3-ketoacyl-CoA synthases

    SciTech Connect (OSTI)

    Blacklock, Brenda J. [Department of Chemistry and Chemical Biology, Purdue School of Science, Indiana University-Purdue University Indianapolis (IUPUI), Indianapolis, IN 46202 (United States)]. E-mail: blacklock@chem.iupui.edu; Jaworski, Jan G. [Donald Danforth Plant Science Center, 975 North Warson Road, St. Louis, MO 63132 (United States)

    2006-07-28T23:59:59.000Z

    The very long chain fatty acids (VLCFA) incorporated into plant lipids are derived from the iterative addition of C2 units provided by malonyl-CoA to an acyl-CoA by the 3-ketoacyl-CoA synthase (KCS) component of a fatty acid elongase (FAE) complex. Mining of the Arabidopsis genome sequence database revealed 20 genes with homology to seed-specific FAE1 KCS. Eight of the 20 putative KCSs were cloned, expressed in yeast, and isolated as (His){sub 6} fusion proteins. Five of the eight (At1g71160, At1g19440, At1g07720, At5g04530, and At4g34250) had little or no activity with C16 to C20 substrates while three demonstrated activity with C16, C18, and C20 saturated acyl-CoA substrates. At1g01120 KCS (KCS1) and At2g26640 KCS had broad substrate specificities when assayed with saturated and mono-unsaturated C16 to C24 acyl-CoAs while At4g34510 KCS was specific for saturated fatty acyl-CoA substrates.

  18. Methods of biological dosimetry employing chromosome-specific staining

    DOE Patents [OSTI]

    Gray, Joe W. (Livermore, CA); Pinkel, Daniel (Walnut Creek, CA)

    2000-01-01T23:59:59.000Z

    Methods and compositions for staining based upon nucleic acid sequence that employ nucleic acid probes are provided. Said methods produce staining patterns that can be tailored for specific cytogenetic analyses. Said probes are appropriate for in situ hybridization and stain both interphase and metaphase chromosomal material with reliable signals. The nucleic acid probes are typically of a complexity greater than 50 kb, the complexity depending upon the cytogenetic application. Methods are provided to disable the hybridization capacity of shared, high copy repetitive sequences and/or remove such sequences to provide for useful contrast. Still further methods are provided to produce chromosome-specific staining reagents which are made specific to the targeted chromosomal material, which can be one or more whole chromosomes, one or more regions on one or more chromosomes, subsets of chromosomes and/or the entire genome. Probes and test kits are provided for use in tumor cytogenetics, in the detection of disease related loci, in analysis of structural abnormalities, such as translocations, and for biological dosimetry. Further, methods and prenatal test kits are provided to stain targeted chromosomal material of fetal cells, including fetal cells obtained from maternal blood. Still further, the invention provides for automated means to detect and analyse chromosomal abnormalities.

  19. Methods And Compositions For Chromosome-Specific Staining

    DOE Patents [OSTI]

    Gray, Joe W. (Livermore, CA); Pinkel, Daniel (Walnut Creek, CA)

    2003-08-19T23:59:59.000Z

    Methods and compositions for staining based upon nucleic acid sequence that employ nucleic acid probes are provided. Said methods produce staining patterns that can be tailored for specific cytogenetic analyses. Said probes are appropriate for in situ hybridization and stain both interphase and metaphase chromosomal material with reliable signals. The nucleic acid probes are typically of a complexity greater than 50 kb, the complexity depending upon the cytogenetic application. Methods are provided to disable the hybridization capacity of shared, high copy repetitive sequences and/or remove such sequences to provide for useful contrast. Still further methods are provided to produce chromosome-specific staining reagents which are made specific to the targeted chromosomal material, which can be one or more whole chromosomes, one or more regions on one or more chromosomes, subsets of chromosomes and/or the entire genome. Probes and test kits are provided for use in tumor cytogenetics, in the detection of disease related loci, in analysis of structural abnormalities, such as translocations, and for biological dosimetry. Further, methods and prenatal test kits are provided to stain targeted chromosomal material of fetal cells, including fetal cells obtained from maternal blood. Still further, the invention provides for automated means to detect and analyse chromosomal abnormalities.

  20. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Definition E85 is a fuel blend nominally consisting of 85% ethanol and 15% gasoline by volume that meets ASTM specification D5798. (Reference Indiana Code 6-6-1.1-103...

  1. A Simple Method for the Prevention of Non-Specific Adsorption...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Method for the Prevention of Non-Specific Adsorption by Nanocrystals onto Surfaces. A Simple Method for the Prevention of Non-Specific Adsorption by Nanocrystals onto Surfaces....

  2. U.S. Department of Energy Building Energy Data Exchange Specification...

    Office of Environmental Management (EM)

    U.S. Department of Energy Building Energy Data Exchange Specification U.S. Department of Energy Building Energy Data Exchange Specification This document describes the DOE Building...

  3. Error estimates and specification parameters for functional renormalization

    SciTech Connect (OSTI)

    Schnoerr, David [Institute for Theoretical Physics, University of Heidelberg, D-69120 Heidelberg (Germany)] [Institute for Theoretical Physics, University of Heidelberg, D-69120 Heidelberg (Germany); Boettcher, Igor, E-mail: I.Boettcher@thphys.uni-heidelberg.de [Institute for Theoretical Physics, University of Heidelberg, D-69120 Heidelberg (Germany)] [Institute for Theoretical Physics, University of Heidelberg, D-69120 Heidelberg (Germany); Pawlowski, Jan M. [Institute for Theoretical Physics, University of Heidelberg, D-69120 Heidelberg (Germany) [Institute for Theoretical Physics, University of Heidelberg, D-69120 Heidelberg (Germany); ExtreMe Matter Institute EMMI, GSI Helmholtzzentrum für Schwerionenforschung mbH, D-64291 Darmstadt (Germany); Wetterich, Christof [Institute for Theoretical Physics, University of Heidelberg, D-69120 Heidelberg (Germany)] [Institute for Theoretical Physics, University of Heidelberg, D-69120 Heidelberg (Germany)

    2013-07-15T23:59:59.000Z

    We present a strategy for estimating the error of truncated functional flow equations. While the basic functional renormalization group equation is exact, approximated solutions by means of truncations do not only depend on the choice of the retained information, but also on the precise definition of the truncation. Therefore, results depend on specification parameters that can be used to quantify the error of a given truncation. We demonstrate this for the BCS–BEC crossover in ultracold atoms. Within a simple truncation the precise definition of the frequency dependence of the truncated propagator affects the results, indicating a shortcoming of the choice of a frequency independent cutoff function.

  4. An empirical specification of the pesek and saving macroeconomic model

    E-Print Network [OSTI]

    Moser, Ernest Richard

    1970-01-01T23:59:59.000Z

    AN EvtPIRICAL SPECIFICATION OF THE PESEK AND SAVING EACROECONONIC NODEL A Thesis by Ernest Richard Noser Submitted to the Graduate ColleEe of Texas A ". i University in partial fulfillment of the requirement for the deCree of KASTM OF SCIENCE... of non-accumulating totals for the stocks of equitics, durables, and bonds must be considered as a source of error. 19 TADLE 4 TlDE DZUQ~D FGd DG:;DD Variable e yt FJP r E ? P Coefficient -0. 03 0. 07 -0. 01 -0. 11 -O. G7 31. 09 -0. 53 1. 29...

  5. Standard specification for nuclear-grade aluminum oxide pellets

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2008-01-01T23:59:59.000Z

    1.1 This specification applies to pellets of aluminum oxide that may be ultimately used in a reactor core, for example, as filler or spacers within fuel, burnable poison, or control rods. In order to distinguish between the subject pellets and “burnable poison” pellets, it is established that the subject pellets are not intended to be used as neutron-absorbing material. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

  6. Implications of precision measurements on texture specific fermion mass matrices

    E-Print Network [OSTI]

    Manmohan Gupta; Gulsheen Ahuja; Rohit Verma

    2009-11-04T23:59:59.000Z

    Implications of texture specific mass matrices have been investigated for both quarks and neutrinos. Interestingly, for the case of quarks Fritzsch-like texture 4 zero mass matrices have been found to be compatible with the present precisely known sin2\\beta as well as other precise CKM matrix elements. In the case of leptonic mass matrices, for both Majorana and Dirac neutrinos we find that for texture 4, 5, 6 zero mass matrices the inverted hierarchy and degenerate scenarios of neutrino masses are ruled out by the present data.

  7. Implications of precision measurements on texture specific fermion mass matrices

    E-Print Network [OSTI]

    Gupta, Manmohan; Verma, Rohit

    2009-01-01T23:59:59.000Z

    Implications of texture specific mass matrices have been investigated for both quarks and neutrinos. Interestingly, for the case of quarks Fritzsch-like texture 4 zero mass matrices have been found to be compatible with the present precisely known sin2\\beta as well as other precise CKM matrix elements. In the case of leptonic mass matrices, for both Majorana and Dirac neutrinos we find that for texture 4, 5, 6 zero mass matrices the inverted hierarchy and degenerate scenarios of neutrino masses are ruled out by the present data.

  8. The process of materials specifications for rubber lining

    SciTech Connect (OSTI)

    Earnest, R.A. [Polymeric Protective Linings, Livonia, MI (United States)

    1998-12-31T23:59:59.000Z

    Rubber is an engineered material with a long history of development, and application. The process of selecting the appropriate material for a given application is critical to the success of a lining project. A through knowledge of the process parameters for a rubber lined system will generate the information necessary to ensure maximum service life from the lining materials. Communication between the owner, applicator and manufacturer defines the process of material specification and selection. The goal of this process is to engineer the best fit for a rubber lining application.

  9. Standard specification for architectural flat glass clad polycarbonate

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2010-01-01T23:59:59.000Z

    1.1 This specification covers the quality requirements for cut sizes of glass clad polycarbonate (GCP) for use in buildings as security, detention, hurricane/cyclic wind-resistant, and blast and ballistic-resistant glazing applications. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  10. CRAD, Specific Administrative Controls - December 14, 2007 | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China U.S. Department ofJune 2,TheEnergy December 14, 2007 Specific Administrative

  11. Data Center Energy Efficiency Measurement Assesment Kit Guide and Specification

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No53197 This work was performedEnergySpecification |Data

  12. Contract Specifications For Olkiluoto 3 Nuclear Power Plant

    SciTech Connect (OSTI)

    Patrakka, Eero [Teollisuuden Voima Oy, 27160 Olkiluoto (Finland)

    2004-07-01T23:59:59.000Z

    The Finnish Parliament ratified in May 2002 the application for a Decision-in- Principle (DIP) that was submitted by Teollisuuden Voima Oy (TVO) in November 2000 concerning the construction of a new nuclear power plant in Finland (FIN5). The bid inquiries for FIN5 were sent out by TVO in September 2002, requesting the bids by the end of March 2003. A contract with the plant supplier was signed in December 2003, implying the construction of a PWR of type EPR (European Pressurised Water Reactor) in Olkiluoto, called Olkiluoto 3 NPP. The preparation of Bid Inquiry Specifications (BIS) was initiated simultaneously with the filing of the application for DIP. The compilation of BIS was an evolutionary process, starting with the collection of relevant reference material, proceeding through the development of technical, administrative and commercial requirements, and ending with the consolidation of all documentation to a package containing the complete BIS. An intensive bid evaluation process started immediately after receiving the bids, accompanied by negotiations with the supplier candidates. The final Contract Specifications (CS) were constituted on the basis of the BIS supplemented with information contained in the bid and the outcome of the contract negotiations. (author)

  13. Process of labeling specific chromosomes using recombinant repetitive DNA

    DOE Patents [OSTI]

    Moyzis, R.K.; Meyne, J.

    1988-02-12T23:59:59.000Z

    Chromosome preferential nucleotide sequences are first determined from a library of recombinant DNA clones having families of repetitive sequences. Library clones are identified with a low homology with a sequence of repetitive DNA families to which the first clones respectively belong and variant sequences are then identified by selecting clones having a pattern of hybridization with genomic DNA dissimilar to the hybridization pattern shown by the respective families. In another embodiment, variant sequences are selected from a sequence of a known repetitive DNA family. The selected variant sequence is classified as chromosome specific, chromosome preferential, or chromosome nonspecific. Sequences which are classified as chromosome preferential are further sequenced and regions are identified having a low homology with other regions of the chromosome preferential sequence or with known sequences of other family members and consensus sequences of the repetitive DNA families for the chromosome preferential sequences. The selected low homology regions are then hybridized with chromosomes to determine those low homology regions hybridized with a specific chromosome under normal stringency conditions.

  14. Is lung sequestration of indium-111-labeled granulocytes organ specific

    SciTech Connect (OSTI)

    Williams, J.H. Jr.; Wilson, A.F.; Moser, K.M. (Univ. of California, Irvine (USA))

    1989-09-01T23:59:59.000Z

    Transient sequestration of polymorphonuclear leukocytes (PMN) in the normal lungs of animals occurred immediately following intravenous injection of 111In-labeled PMN. We investigated the organ specificity of this process. Equal amounts of homologous PMN, derived from the intravascular space and labeled with (111In)oxine, were infused either intravenously (i.v.) or intraarterially (i.a.) into pairs of rats. Changes in radioactivity emitted from three regions--representing lung, liver and spleen, and lower body--were determined from images during the following hour. A nonspecific character was demonstrated by the transient sequestration of activity in the lower body following i.a. infusions. However, the rate of initial clearance of activity (first 30 min) from the lungs of i.v.-infused rats was relatively slower than from the lower body of i.a.-infused rats. This suggests the presence of a lung-specific as well, which may be important for localization of PMN-related events to the lung.

  15. Finite quantum dissipation: the challenge of obtaining specific heat

    E-Print Network [OSTI]

    Peter Hänggi; Gert-Ludwig Ingold; Peter Talkner

    2008-05-26T23:59:59.000Z

    We consider a free particle coupled with finite strength to a bath and investigate the evaluation of its specific heat. A harmonic oscillator bath of Drude type with cutoff frequency omega_D is employed to model an ohmic friction force with dissipation strength gamma. Two scenarios for obtaining specific heat are presented. The first one uses the measurement of the kinetic energy of the free particle while the second one is based on the reduced partition function. Both descriptions yield results which are consistent with the Third Law of thermodynamics. Nevertheless, the two methods produce different results that disagree even in their leading quantum corrections at high temperatures. We also consider the regime where the cutoff frequency is smaller than the friction strength, i.e. omega_Dheat based on the thermodynamic prescription becomes negative. This anomaly is rooted in an ill-defined density of states of the damped free particle which assumes unphysical negative values when gamma/omega_D>1.

  16. Air-Cooled Electric Chillers, Purchasing Specifications for Energy-Efficient Products (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-12-01T23:59:59.000Z

    Energy efficiency purchasing specifications for federal procurements of air-cooled electric chillers.

  17. Commercial Central Air Conditioners, Purchasing Specifications for Energy-Efficient Products (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-02-01T23:59:59.000Z

    Energy efficiency purchasing specifications for federal procurements of commercial central air conditioners.

  18. Residential Dishwashers, Purchasing Specifications for Energy-Efficient Products (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-06-01T23:59:59.000Z

    Performance and purchasing specifications for residential dishwashers under the FEMP-designated product program.

  19. Clothes Washers, Purchasing Specifications for Energy-Efficient Products (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-06-01T23:59:59.000Z

    Performance and purchasing specifications for residential clothes washers under the FEMP-designated product program.

  20. Standard specification for niobium-titanium alloy billets, bar, and rod for superconducting applications

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2011-01-01T23:59:59.000Z

    Standard specification for niobium-titanium alloy billets, bar, and rod for superconducting applications

  1. U.S. Department of Energy Environmental Management Site-Specific

    Office of Environmental Management (EM)

    Operating a Local Site-Specific Advisory Board ... 8 A. Public Participation and Record Keeping ......

  2. Metallic coatings: autocatalytic (electroless) nickel-phosphorus alloy coatings: specification and test methods

    E-Print Network [OSTI]

    International Organization for Standardization. Geneva

    2003-01-01T23:59:59.000Z

    Metallic coatings: autocatalytic (electroless) nickel-phosphorus alloy coatings: specification and test methods

  3. Commercial Gas Water Heaters, Purchasing Specifications for Energy-Efficient Products (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-09-01T23:59:59.000Z

    Performance and purchasing specifications for commercial gas water heaters under the FEMP-designated product program.

  4. A patient-specific scatter artifacts correction method

    E-Print Network [OSTI]

    Zhao, Wei; Niu, Kai; Schafer, Sebastian; Royalty, Kevin; Chen, Guang-Hong

    2015-01-01T23:59:59.000Z

    This paper provides a fast and patient-specific scatter artifact correction method for cone-beam computed tomography (CBCT) used in image-guided interventional procedures. Due to increased irradiated volume of interest in CBCT imaging, scatter radiation has increased dramatically compared to 2D imaging, leading to a degradation of image quality. In this study, we propose a scatter artifact correction strategy using an analytical convolution-based model whose free parameters are estimated using a rough estimation of scatter profiles from the acquired cone-beam projections. It was evaluated using Monte Carlo simulations with both monochromatic and polychromatic X-ray sources. The results demonstrated that the proposed method significantly reduced the scatter-induced shading artifacts and recovered CT numbers.

  5. Automatic generation of executable communication specifications from parallel applications

    SciTech Connect (OSTI)

    Pakin, Scott [Los Alamos National Laboratory; Wu, Xing [NCSU; Mueller, Frank [NCSU

    2011-01-19T23:59:59.000Z

    Portable parallel benchmarks are widely used and highly effective for (a) the evaluation, analysis and procurement of high-performance computing (HPC) systems and (b) quantifying the potential benefits of porting applications for new hardware platforms. Yet, past techniques to synthetically parameterized hand-coded HPC benchmarks prove insufficient for today's rapidly-evolving scientific codes particularly when subject to multi-scale science modeling or when utilizing domain-specific libraries. To address these problems, this work contributes novel methods to automatically generate highly portable and customizable communication benchmarks from HPC applications. We utilize ScalaTrace, a lossless, yet scalable, parallel application tracing framework to collect selected aspects of the run-time behavior of HPC applications, including communication operations and execution time, while abstracting away the details of the computation proper. We subsequently generate benchmarks with identical run-time behavior from the collected traces. A unique feature of our approach is that we generate benchmarks in CONCEPTUAL, a domain-specific language that enables the expression of sophisticated communication patterns using a rich and easily understandable grammar yet compiles to ordinary C + MPI. Experimental results demonstrate that the generated benchmarks are able to preserve the run-time behavior - including both the communication pattern and the execution time - of the original applications. Such automated benchmark generation is particularly valuable for proprietary, export-controlled, or classified application codes: when supplied to a third party. Our auto-generated benchmarks ensure performance fidelity but without the risks associated with releasing the original code. This ability to automatically generate performance-accurate benchmarks from parallel applications is novel and without any precedence, to our knowledge.

  6. Specificity of growth inhibition of melanoma by 4-hydroxyanisole

    SciTech Connect (OSTI)

    Kulkarni, G.A.; Nathanson, L.

    1989-01-01T23:59:59.000Z

    An experimental study using human melanoma (NEL-MI), rat hepatoma (Fu5-5), and human kidney (293-31) cell lines was undertaken in order to evaluate the antitumor activity of 4-hydroxyanisole (4-OHA) in vitro. Prior reports have indicated highly specific antitumor activity of 4-OHA against melanoma cells in vitro. This specific antitumor activity has been proposed to be due to the oxidation of 4-OHA by tyrosinase to cytotoxic oxidation products. Dose-dependent cytotoxicity was observed when cells were cultured for 72 h in the presence of 4-OHA. At 100 microM, 4-OHA produced growth inhibition of 62%, 32%, and 55% in melanoma, hepatoma, and kidney cell lines, respectively. No effect was seen at 10 microM 4-OHA. 1,000 microM 4-OHA produced 100% kill. Tyrosinase activity was detected only in melanoma cells. The effect of 100 microM 4-OHA on the incorporation of 3H DNA precursors in melanoma, hepatoma, and kidney cells was also studied. Thymidine incorporation was inhibited in all three cell lines at the lowest cell density tested, with the greatest inhibition seen on melanoma cells. As cell density increased, the effect of 4-OHA on thymidine incorporation decreased. With respect to RNA synthesis, 4-OHA significantly reduced the incorporation of uridine in all three cell lines, with the greatest effect in melanoma cells. Cell density also affected the inhibition of uridine incorporation, but to a lesser extent than that observed on thymidine incorporation. The effect of 4-OHA on leucine incorporation was modest and uninfluenced by cell density. Thus, cytotoxicity of 4-OHA may involve two different mechanisms.

  7. Improving Site-Specific Radiological Performance Assessments - 13431

    SciTech Connect (OSTI)

    Tauxe, John; Black, Paul; Catlett, Kate; Lee, Robert; Perona, Ralph; Stockton, Tom; Sully, Mike [Neptune and Company, Inc., Los Alamos, New Mexico 87544 (United States)] [Neptune and Company, Inc., Los Alamos, New Mexico 87544 (United States)

    2013-07-01T23:59:59.000Z

    An improved approach is presented for conducting complete and defensible radiological site-specific performance assessments (PAs) to support radioactive waste disposal decisions. The basic tenets of PA were initiated some thirty years ago, focusing on geologic disposals and evaluating compliance with regulations. Some of these regulations were inherently probabilistic (i.e., addressing uncertainty in a quantitative fashion), such as the containment requirements of the U.S. Environmental Protection Agency's (EPA's) 40 CFR 191, Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes, Chap. 191.13 [1]. Methods of analysis were developed to meet those requirements, but at their core early PAs used 'conservative' parameter values and modeling approaches. This limited the utility of such PAs to compliance evaluation, and did little to inform decisions about optimizing disposal, closure and long-term monitoring and maintenance, or, in general, maintaining doses 'as low as reasonably achievable' (ALARA). This basic approach to PA development in the United States was employed essentially unchanged through the end of the 20. century, principally by the U.S. Department of Energy (DOE). Performance assessments developed in support of private radioactive waste disposal operations, regulated by the U.S. Nuclear Regulatory Commission (NRC) and its agreement states, were typically not as sophisticated. Discussion of new approaches to PA is timely, since at the time of this writing, the DOE is in the midst of revising its Order 435.1, Radioactive Waste Management [2], and the NRC is revising 10 CFR 61, Licensing Requirements for Land Disposal of Radioactive Waste [3]. Over the previous decade, theoretical developments and improved computational technology have provided the foundation for integrating decision analysis (DA) concepts and objective-focused thinking, plus a Bayesian approach to probabilistic modeling and risk analysis, to guide improvements in PA. This decision-making approach, [4, 5, 6] provides a transparent formal framework for using a value- or objective-focused approach to decision-making. DA, as an analytical means to implement structured decision making, provides a context for both understanding how uncertainty affects decisions and for targeting uncertainty reduction. The proposed DA approach improves defensibility and transparency of decision-making. The DA approach is fully consistent with the need to perform realistic modeling (rather than conservative modeling), including evaluation of site-specific factors. Instead of using generic stylized scenarios for radionuclide fate and transport and for human exposures to radionuclides, site-specific scenarios better represent the advantages and disadvantages of alternative disposal sites or engineered designs, thus clarifying their differences as well as providing a sound basis for evaluation of site performance. The full DA approach to PA is described, from explicitly incorporating societal values through stakeholder involvement to model building. Model building involves scoping by considering features, events, processes, and exposure scenarios (FEPSs), development of a conceptual site model (CSM), translation into numerical models and subsequent computation, and model evaluation. These are implemented in a cycle of uncertainty analysis, sensitivity analysis and value of information analysis so that uncertainty can be reduced until sufficient confidence is gained in the decisions to be made. This includes the traditional focus on hydrogeological processes, but also places emphasis on other FEPSs such as biotically-induced transport and human exposure phenomena. The significance of human exposure scenarios is emphasized by modifying the traditional acronym 'FEPs' to include them, hence 'FEPSs'. The radioactive waste community is also recognizing that disposal sites are to be considered a national (or even global) resource. As such, there is a pressing need to optimize their utility withi

  8. Coal liquefaction process wherein jet fuel, diesel fuel and/or ASTM No. 2 fuel oil is recovered

    DOE Patents [OSTI]

    Bauman, Richard F. (Houston, TX); Ryan, Daniel F. (Friendswood, TX)

    1982-01-01T23:59:59.000Z

    An improved process for the liquefaction of coal and similar solid carbonaceous materials wherein a hydrogen donor solvent or diluent derived from the solid carbonaceous material is used to form a slurry of the solid carbonaceous material and wherein the naphthenic components from the solvent or diluent fraction are separated and used as jet fuel components. The extraction increases the relative concentration of hydroaromatic (hydrogen donor) components and as a result reduces the gas yield during liquefaction and decreases hydrogen consumption during said liquefaction. The hydrogenation severity can be controlled to increase the yield of naphthenic components and hence the yield of jet fuel and in a preferred embodiment jet fuel yield is maximized while at the same time maintaining solvent balance.

  9. Hardness and microstructural response to thermal annealing of irradiated ASTM A533B class 1 plate steel

    SciTech Connect (OSTI)

    Reinhart, D.E. [SMS Concast, Inc., Pittsburgh, PA (United States); Kumar, A.S. [Univ. of Missouri, Rolla, MO (United States); Gelles, D.S.; Hamilton, M.L. [Pacific Northwest Lab., Richland, WA (United States); Rosinski, S.T. [Electric Power Research Inst., Charlotte, NC (United States)

    1999-10-01T23:59:59.000Z

    Hardness measurements were used to determine the post-irradiation annealing response of A533B class 1 plate steel irradiated to a fluence of 1 {times} 10{sup 19} n/cm{sup 2} (E > 1 MeV) at 150 C. Rockwell hardness measurements indicated that the material had hardened by 6.6 points on the B scale after irradiation. The irradiation induced hardness increase was associated with a decrease in upper shelf energy from 63.4 J to 5-1.8 J and a temperature shift in the Charpy curve at the 41 J level from 115 C to 215 C. Specimens were annealed after irradiation at temperatures of 343 C (650 F), 399 C (750 F), and 454 C (850 F) for durations of up to one week (168 h). Hardness measurements were made to chart recovery of hardness as a function of time and temperature. Specimens annealed at the highest temperature 454 C recovered the fastest, fully recovering within 144 h. Specimens annealed at 399 C recovered completely within 168 h. Specimens annealed at the lowest temperature, 343 C recovered only {approximately}70% after 168 h of annealing. After neutron irradiation, a new feature of black spot damage was found to be superimposed on the unirradiated microstructure. The density of black spots was found to vary from 2.3 {times} 10{sup 15}/cm{sup 3} to 1.1 {times} 10{sup 16}/cm{sup 3} with an average diameter of 2.85 nm. Following annealing at 454 C for 24 h the black spot damage was completely annealed out. It was concluded that the black spot damage was responsible for 70% of the irradiation-induced hardness.

  10. Effect of aging on impact properties of ASTM A890 Grade 1C super duplex stainless steel

    SciTech Connect (OSTI)

    Martins, Marcelo [Industrial Manager of SULZER BRASIL S/A and Professor of the Centro Universitario Salesiano de Sao Paulo (UNISAL) at Americana, SP (Brazil)], E-mail: marcelo.martins@sulzer.com; Forti, Leonardo Rodrigues Nogueira [Materials Engineer at UFSCar, Federal University of Sao Carlos (Brazil)], E-mail: leornf@yahoo.com.br

    2008-02-15T23:59:59.000Z

    Super duplex stainless steels in the solution annealed condition are thermodynamically metastable systems which, when exposed to heat, present a strong tendency to 'seek' the most favorable thermodynamic condition. The main purpose of this study was to characterize the microstructure of a super duplex stainless steel in the as cast and solution annealed conditions, and to determine the influence of aging heat treatments on its impact strength, based on Charpy impact tests applied to V-notched test specimens. The sigma phase was found to begin precipitating at heat treatment temperatures above 760 deg. C and to dissolve completely only above 1040 deg. C, with the highest peak concentration of this phase appearing at close to 850 deg. C. Heat treatments conducted at temperatures of 580 deg. C to 740 deg. C led to a reduction of the energy absorbed in the Charpy impact test in response to the precipitation of a particulate phase with particle sizes ranging from 0.5 {mu}m to 1.0 {mu}m, with a chromium and iron-rich chemical composition.

  11. Reactor-specific spent fuel discharge projections, 1987-2020

    SciTech Connect (OSTI)

    Walling, R.C.; Heeb, C.M.; Purcell, W.L.

    1988-03-01T23:59:59.000Z

    The creation of five reactor-specific spent fuel data bases that contain information on the projected amounts of spent fuel to be discharged from U.S. commercial nuclear reactors through the year 2020 is described. The data bases contain detailed spent fuel information from existing, planned, and projected pressurized water reactors (PWR) and boiling water eactors (BWR), and one existing high temperature gas reactor (HTGR). The projections are based on individual reactor information supplied by the U.S. reactor owners. The basic information is adjusted to conform to Energy Information Administration (EIA) forecasts for nuclear installed capacity, generation, and spent fuel discharged. The EIA cases considered are: No New Orders (assumes increasing burnup), No New Orders with No Increased Burnup, Upper Reference (assumes increasing burnup), Upper Reference with No Increased Burnup, and Lower Reference (assumes increasing burnup). Detailed, by-reactor tables are provided for annual discharged amounts of spent fuel, for storage requirements assuming maximum at-reactor storage, and for storage requirements assuming maximum at-reactor storage plus intra-utility transshipment of spent fuel. 8 refs., 8 figs., 10 tabs.

  12. A Domain Specific Ontology Based Semantic Web Search Engine

    E-Print Network [OSTI]

    Mukhopadhyay, Debajyoti; Mukherjee, Sreemoyee; Bhattacharya, Jhilik; Kim, Young-Chon

    2011-01-01T23:59:59.000Z

    Since its emergence in the 1990s the World Wide Web (WWW) has rapidly evolved into a huge mine of global information and it is growing in size everyday. The presence of huge amount of resources on the Web thus poses a serious problem of accurate search. This is mainly because today's Web is a human-readable Web where information cannot be easily processed by machine. Highly sophisticated, efficient keyword based search engines that have evolved today have not been able to bridge this gap. So comes up the concept of the Semantic Web which is envisioned by Tim Berners-Lee as the Web of machine interpretable information to make a machine processable form for expressing information. Based on the semantic Web technologies we present in this paper the design methodology and development of a semantic Web search engine which provides exact search results for a domain specific search. This search engine is developed for an agricultural Website which hosts agricultural information about the state of West Bengal.

  13. Recommended environmental dose calculation methods and Hanford-specific parameters

    SciTech Connect (OSTI)

    Schreckhise, R.G.; Rhoads, K.; Napier, B.A.; Ramsdell, J.V. (Pacific Northwest Lab., Richland, WA (United States)); Davis, J.S. (Westinghouse Hanford Co., Richland, WA (United States))

    1993-03-01T23:59:59.000Z

    This document was developed to support the Hanford Environmental Dose overview Panel (HEDOP). The Panel is responsible for reviewing all assessments of potential doses received by humans and other biota resulting from the actual or possible environmental releases of radioactive and other hazardous materials from facilities and/or operations belonging to the US Department of Energy on the Hanford Site in south-central Washington. This document serves as a guide to be used for developing estimates of potential radiation doses, or other measures of risk or health impacts, to people and other biota in the environs on and around the Hanford Site. It provides information to develop technically sound estimates of exposure (i.e., potential or actual) to humans or other biotic receptors that could result from the environmental transport of potentially harmful materials that have been, or could be, released from Hanford operations or facilities. Parameter values and information that are specific to the Hanford environs as well as other supporting material are included in this document.

  14. Specificity, flexibility and valence of DNA bonds guide emulsion architecture

    E-Print Network [OSTI]

    Lang Feng; Lea-Laetitia Pontani; Remi Dreyfus; Paul Chaikin; Jasna Brujic

    2013-03-25T23:59:59.000Z

    The specificity and thermal reversibility of DNA interactions have enabled the self-assembly of crystal structures, self-replicating materials and colloidal molecules. Grafting DNA onto liquid interfaces of emulsions leads to exciting new architectural possibilities due to the mobility of the DNA ligands and the patches they form between bound droplets. Here we show that the size and number of these adhesion patches (valency) can be controlled. Valence 2 leads to flexible polymers of emulsion droplets, while valence above 4 leads to rigid droplet networks. A simple thermodynamic model quantitatively describes the increase in the patch size with droplet radii, DNA concentration and the stiffness of the tether to the sticky-end. The patches are formed between droplets with complementary DNA strands or alternatively with complementary colloidal nanoparticles to mediate DNA binding between droplets. This emulsion system opens the route to directed self-assembly of more complex structures through distinct DNA bonds with varying strengths and controlled valence and flexibility.

  15. Role of UCG in maximizing coal utilization: site specific study

    SciTech Connect (OSTI)

    Linn, J. K.; Love, S. L.

    1980-01-01T23:59:59.000Z

    The Department of Energy is sponsoring a project to develop a planning scheme for improving the utilization of coal deposits. This prototype study, called Total Economic Coal Utilization (TECU), is being applied to specific coal reserves within the Centralia-Chehalis District of Washington State. A significant aspect of the study is to determine the potential role for in situ gasification in maximizing the energy recovery and use. The results obtained indicate that UCG could be used to realize a sizeable increase in the amount of energy that can be economically recovered from the District. Since UCG technology has not reached the commercialization stage, some significant assumptions had to be made for this study. These are that the in situ process will work reliably and that product gas cleanup will proceed without major problems. However, if these conditions are met, this assessment indicates that in situ coal gasification could increase the extractable energy from Washington's Centralia-Chehalis coal deposits by a substantial amount and that this additional energy could be accessed at reasonable cost.

  16. Oxygen as a site specific structural probe in neutron diffraction

    SciTech Connect (OSTI)

    Neuefeind, Joerg C [ORNL; Simonson, J Michael {Mike} [ORNL; Salmon, Phil [University of Bath; Zeidler, Anita [University of Bath; Fischer, Henry E [Institut Laue-Langevin (ILL); Rauch, Helmut [E141 Atominstitut der & #xD6; sterreichischen Universit& #xE4; ten,; Markland, Thomas [Columbia University; Lemmel, Hartmut [Technical University Vienna

    2011-01-01T23:59:59.000Z

    Oxygen is a ubiquitous element, playing an essential role in most scientific and technological disciplines, and is often incorporated within a structurally disordered material where examples include molten silicates in planetary science, glasses used for lasers and optical communication, and water in biological processes. Establishing the structure of a liquid or glassy oxide and thereby its relation to the functional properties of a material is not, however, a trivial task owing to the complexity associated with atomic disorder. Here we approach this challenge by measuring the bound coherent neutron scattering lengths of the oxygen isotopes with the sensitive technique of neutron interferometry. We find that there is a small but finite contrast of 0.204(6) fm between the scattering lengths of the isotope 18O and oxygen of natural isotopic abundance natO, contrary to tables of recommended values. This has enabled us to investigate the structure of both light and heavy water by exploiting, for the first time, the method of oxygen isotope substitution in neutron diffraction, thus circumventing many of the significant problems associated with more traditional methods in which hydrogen is substituted by deuterium. We find a difference of ~0.5% between the O-H and O-D intra-molecular bond distances which is much smaller than recent estimates based on diffraction data and is found to be in excellent agreement with path integral molecular dynamics simulations made with a flexible polarisable water model. Our results demonstrate the potential for using oxygen isotope substitution as a powerful and effective site specific probe in a plethora of materials, of pertinence as instrumentation at next generation neutron sources comes online

  17. Crucial role of non-specific interactions in amyloid nucleation

    E-Print Network [OSTI]

    An?ela Šari?; Yassmine C. Chebaro; Tuomas P. J. Knowles; Daan Frenkel

    2014-12-02T23:59:59.000Z

    Protein oligomers have been implicated as toxic agents in a wide range of amyloid-related diseases. Yet it has remained unsolved whether the oligomers are a necessary step in the formation of amyloid fibrils, or just a dangerous by-product. Analogously, it has not been resolved if the amyloid nucleation process is a classical one-step nucleation process, or a two-step process involving pre-nucleation clusters. We use coarse-grained computer simulations to study the effect of non-specific attractions between peptides on the primary nucleation process underlying amyloid fibrillization. We find that for peptides that do not attract, the classical one-step nucleation mechanism is possible, but only at non-physiologically high peptide concentrations. At low peptide concentrations, which mimic the physiologically relevant regime, attractive inter-peptide interactions are essential for fibril formation. Nucleation then inevitably takes place through a two-step mechanism involving prefibrillar oligomers. We show that oligomers not only help peptides meet each other, but create an environment that facilitates the conversion of monomers into the $\\beta$-sheet rich form characteristic of fibrils. Nucleation typically does not proceed via the most prevalent oligomers, but via an oligomer size that is only observed in rare fluctuations, which is why such aggregates might be hard to capture experimentally. Finally, we find that the nucleation of amyloid fibrils cannot be described by classical nucleation theory: in the two-step mechanism the critical nucleus size increases both with an increase in concentration and in the inter-peptide interactions, in direct contrast with predictions from classical nucleation theory.

  18. Immunity, Vol. 13, 529538, October, 2000, Copyright 2000 by Cell Press Enhanced Antigen-Specific Antitumor Immunity

    E-Print Network [OSTI]

    Fahmy, Tarek

    -specific differentiation antigens specific to the tissue type from which the tumor arose (e.g., gp100 and tyrosinase

  19. Site-Specific Seismic Site Response Model for the Waste Treatment Plant, Hanford, Washington

    SciTech Connect (OSTI)

    Rohay, Alan C.; Reidel, Steve P.

    2005-02-24T23:59:59.000Z

    This interim report documents the collection of site-specific geologic and geophysical data characterizing the Waste Treatment Plant site and the modeling of the site-specific structure response to earthquake ground motions.

  20. Knowledge of Mathematical Equivalence in Children with Specific Language Impairment: Evidence from Gesture and Speech

    E-Print Network [OSTI]

    Knowledge of Mathematical Equivalence in Children with Specific Language Impairment: Evidence from investigated understanding of mathematical equivalence in children with Specific Language Impairment (SLI and mathematical equivalence problems. Problem solutions and explanations were coded for accuracy and problem

  1. Region-Specific Protein Abundance Changes in the Brain of MPTP...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Region-Specific Protein Abundance Changes in the Brain of MPTP-induced Parkinson’s Disease Mouse Model . Region-Specific Protein Abundance Changes in the Brain of...

  2. Development and testing of an application specific force sensor for snowpack assessment

    E-Print Network [OSTI]

    Whittemore, Samuel Tileston

    2014-01-01T23:59:59.000Z

    Snow penetrometers create a specific application for a force sensor with specifications that are over achieved at great cost when using traditional load cells. A moderately priced, compact force sensor suitable for this ...

  3. Development of a Model Specification for Performance Monitoring Systems for Commercial Buildings

    E-Print Network [OSTI]

    Development of a Model Specification for Performance Monitoring Systems for Commercial Buildings the development of a model specification for performance monitoring systems for commercial buildings capabilities in #12;commercial buildings by demonstrating the capabilities of commercially available technology

  4. Improving Usability of Interactive Graphics Specification and Implementation with Picking Views

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Improving Usability of Interactive Graphics Specification and Implementation with Picking Views.conversy@enac.fr Abstract-- Specifying and programming graphical interactions are difficult tasks, notably because designers architecture improves the usability of the specification and the implementation of graphical interaction

  5. The systems phenomenon in buildings and its application to construction specifications

    E-Print Network [OSTI]

    Skendzel, Richard A. (Richard Adam)

    1994-01-01T23:59:59.000Z

    This thesis proposes that the holistic quality of a building can be improved by modifying the way that it is represented in the specifications document. It develops a construction specifications format based on a substantive ...

  6. A Comparison of Interactive Color Specification Systems for Human-Computer Interfaces

    E-Print Network [OSTI]

    Wells, Evelyn Frances

    Color specification is a time-consuming and challenging task in computer graphics applications. The purpose of this research is to examine the color specification process in the context of current human-computer interface technology...

  7. Text-Alternative Version: Model Specification for LED Roadway Luminaires Webcast

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Model Specification for LED Roadway Luminaires" webcast, held November 15, 2011.

  8. Spent Nuclear Fuel (SNF) Project Canister Storage Building (CSB) Procurement Specifications [SEC 1 and 2

    SciTech Connect (OSTI)

    BAZINET, G.D.

    2000-05-01T23:59:59.000Z

    This specification section defines the welding, brazing, thermal treatment, examination and testing requirements for carbon steel, and stainless steel piping.

  9. Revision of Specification Automata under Quantitative Preferences Kangjin Kim and Georgios Fainekos

    E-Print Network [OSTI]

    Fainekos, Georgios E.

    as well. In [4], [5], we studied the theoretical foundations of the specification automata revisionRevision of Specification Automata under Quantitative Preferences Kangjin Kim and Georgios Fainekos Abstract-- We study the problem of revising specifications with preferences for automata based control

  10. UCSB Lab-specific Chemical Hygiene Plan REV 04-2013

    E-Print Network [OSTI]

    Bigelow, Stephen

    UCSB Lab-specific Chemical Hygiene Plan REV 04-2013 Chemical Hygiene Plan (CHP) General Information;UCSB Lab-specific Chemical Hygiene Plan 2 YL, REV 04/13 This page intentionally left blank #12;UCSB Lab-specific Chemical Hygiene Plan 3 YL, REV 04/13 Table of Contents Preface

  11. UCSB Lab-specific Chemical Hygiene Plan KE, Rev. 8/18/14

    E-Print Network [OSTI]

    Sideris, Thomas C.

    UCSB Lab-specific Chemical Hygiene Plan KE, Rev. 8/18/14 Lab-Specific Chemical Hygiene Plan (CHP, 1012B, 1016, 1024, 1032) Chemical Hygiene Officer (CHO): David Vandenberg (David.Vandenberg@ehs.ucsb.edu) #12;UCSB Lab-specific Chemical Hygiene Plan 2 KE, Rev. 8/18/14 This page intentionally left blank #12

  12. UCSB Lab-specific Chemical Hygiene Plan KE, Rev. 10/19/12

    E-Print Network [OSTI]

    Bigelow, Stephen

    UCSB Lab-specific Chemical Hygiene Plan KE, Rev. 10/19/12 Chemical Hygiene Plan (CHP) General, 1024, 1032) #12;UCSB Lab-specific Chemical Hygiene Plan 2 KE, Rev. 10/19/12 This page intentionally left blank #12;UCSB Lab-specific Chemical Hygiene Plan 3 KE, Rev. 10/19/12 Table of Contents Table

  13. UCSB Lab-specific Chemical Hygiene Plan KE, Rev. 3/19/13

    E-Print Network [OSTI]

    Bigelow, Stephen

    UCSB Lab-specific Chemical Hygiene Plan KE, Rev. 3/19/13 Lab-Specific Chemical Hygiene Plan (CHP, 1012B, 1016, 1024, 1032) Chemical Hygiene Officer (CHO): David Vandenberg (David.Vandenberg@ehs.ucsb.edu) #12;UCSB Lab-specific Chemical Hygiene Plan 2 KE, Rev. 3/19/13 This page intentionally left blank #12

  14. Nanopore Based Sequence Specific Detection of Duplex DNA for Genomic Profiling

    E-Print Network [OSTI]

    Nanopore Based Sequence Specific Detection of Duplex DNA for Genomic Profiling Alon Singer,,§ Meni demonstrate a purely electrical method for the single-molecule detection of specific DNA sequences, achieved to achieve high affinity and sequence specificity. Sequence detection is performed by reading the ion current

  15. Using ACL2 to Verify Security Properties of Specification-based Intrusion Detection Systems

    E-Print Network [OSTI]

    California at Davis, University of

    Using ACL2 to Verify Security Properties of Specification- based Intrusion Detection Systems Tao. These specifications are mainly developed manually, based upon an expert understanding of characteristics of #12;the to normal users [CK01]. In SHIM, specifications are developed in SHIM to constrain the behaviors

  16. A tool for checking CSP||B specifications Huu Nghia Nguyen, Jean-Pierre Jacquot

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A tool for checking CSP||B specifications Huu Nghia Nguyen, Jean-Pierre Jacquot LORIA ­ Nancy in the verification of CSP||B specifications. Our primary research goal is methodological: we aim at understanding. One specification may require the use of B for managing some complex data structure, of CSP

  17. MODELLING AND FORMAL SPECIFICATION OF A MULTIAGENT TELEMEDICINE SYSTEM FOR DIABETES

    E-Print Network [OSTI]

    Zhu, Hong

    MODELLING AND FORMAL SPECIFICATION OF A MULTIAGENT TELEMEDICINE SYSTEM FOR DIABETES CARE Iñaki@gbt.tfo.upm.es Keywords: Software agents, MAS Formal Specification, Modelling, Diabetes Care, Telemonitoring, Telemedicine Abstract: This paper presents the modelling and formal specification of a telemedicine system for diabetes

  18. Mode-specific energy analysis for rotating-vibrating triatomic molecules in classical trajectory simulation

    E-Print Network [OSTI]

    Kim, Myung Soo

    Mode-specific energy analysis for rotating-vibrating triatomic molecules in classical trajectory A method for the mode-specific energy analysis in a classical trajectory calculation is developed. The pure, suggesting that the present method is adequate for the mode-specific energy analysis of classical trajectory

  19. Final Report, Volume 2, The Development of Qualification Standards for Cast Duplex Stainless Steel

    SciTech Connect (OSTI)

    Russell, Steven, W.; Lundin, Carl, D.

    2005-09-30T23:59:59.000Z

    The scope of testing cast Duplex Stainless Steel (DSS) required testing to several ASTM specifications, while formulating and conducting industry round robin tests to verify and study the reproducibility of the results. ASTM E562 (Standard Test Method for Determining Volume Fraction by Systematic manual Point Count) and ASTM A923 (Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels) were the specifications utilized in conducting this work. An ASTM E562 industry round robin, ASTM A923 applicability study, ASTM A923 industry round robin, and an ASTM A923 study of the effectiveness of existing foundry solution annealing procedures for producing cast DSS without intermetallic phases were implemented. In the ASTM E562 study, 5 samples were extracted from various cast austenitic and DSS in order to have varying amounts of ferrite. Each sample was metallographically prepared by UT and sent to each of 8 participants for volume fraction of ferrite measurements. Volume fraction of ferrite was measured using manual point count per ASTM E562. FN was measured from the Feritescope{reg_sign} and converted to volume fraction of ferrite. Results indicate that ASTM E562 is applicable to DSS and the results have excellent lab-to-lab reproducibility. Also, volume fraction of ferrite conversions from the FN measured by the Feritescope{reg_sign} were similar to volume fraction of ferrite measured per ASTM E562. In the ASTM A923 applicability to cast DSS study, 8 different heat treatments were performed on 3 lots of ASTM A890-4A (CD3MN) castings and 1 lot of 2205 wrought DSS. The heat treatments were selected to produce a wide range of cooling rates and hold times in order to study the suitability of ASTM A923 to the response of varying amounts on intermetallic phases [117]. The test parameters were identical to those used to develop ASTM A923 for wrought DSS. Charpy V-notch impact samples were extracted from the castings and wrought DSS and tested per ASTM A923 method B (Charpy impact test). Method A (sodium hydroxide etch test) was performed on one half of a fractured Charpy V-notch impact sample and Method C (ferric chloride corrosion weight loss test) was performed on another half. Test results for the three cast lots and one wrought lot indicate that ASTM A923 is relevant for detecting intermetallic phases in cast DSS. In the ASTM A923 round robin study, five laboratories conducted ASTM A923 Methods A & C on cast DSS material and the lab-to-lab reproducibility of the data was determined. Two groups of samples were sent to the participants. Group 1 samples were tested per ASTM A923 Method A, group 2 samples were tested by ASTM A923 Method C. Testing procedures for this round robin study were identical to those used in the ASTM A923 applicability study. Results from this round robin indicate that there is excellent lab-to-lab reproducibility of ASTM A923 with respect to cast DSS and that ASTM A923 could be expanded to cover both wrought and cast DSS. In the ASTM A923 study of the effectiveness of existing foundry solution annealing procedures for producing cast DSS without intermetallic phases, Ten heats of ASTM A890-4A (CD3MN) in the foundry solution annealed condition were tested per ASTM A923 Methods A, B, & C. Testing of these materials per ASTM A923 was used to determine if the foundry solution anneal procedures were adequate to completely eliminate any intermetallic phases, which may have precipitated during the casting and subsequent heat treatment processes. All heats showed no sign of intermetallic phase per Method A, passed minimum Charpy impact energy requirements per Method B (> 40 ft-lbs {at} -40 C (-40 F)), and showed negligible weight loss per Method C (< 10 mdd). These results indicate that the solution annealing procedure used by foundries is adequate to produce a product free from intermetallic phases.

  20. Final Report, Volume 2, The Development of Qualification Standards for Cast Duplex Stainless Steel

    SciTech Connect (OSTI)

    Russell, Steven, W.; Lundin, Carl, W.

    2005-09-30T23:59:59.000Z

    The scope of testing cast Duplex Stainless Steel (DSS) required testing to several ASTM specifications, while formulating and conducting industry round robin tests to verify and study the reproducibility of the results. ASTM E562 (Standard Test Method for Determining Volume Fraction by Systematic manual Point Count) and ASTM A923 (Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels) were the specifications utilized in conducting this work. An ASTM E562 industry round robin, ASTM A923 applicability study, ASTM A923 industry round robin, and an ASTM A923 study of the effectiveness of existing foundry solution annealing procedures for producing cast DSS without intermetallic phases were implemented. In the ASTM E562 study, 5 samples were extracted from various cast austenitic and DSS in order to have varying amounts of ferrite. Each sample was metallographically prepared by UT and sent to each of 8 participants for volume fraction of ferrite measurements. Volume fraction of ferrite was measured using manual point count per ASTM E562. FN was measured from the Feritescope�������® and converted to volume fraction of ferrite. Results indicate that ASTM E562 is applicable to DSS and the results have excellent lab-to-lab reproducibility. Also, volume fraction of ferrite conversions from the FN measured by the Feritescope�������® were similar to volume fraction of ferrite measured per ASTM E562. In the ASTM A923 applicability to cast DSS study, 8 different heat treatments were performed on 3 lots of ASTM A890-4A (CD3MN) castings and 1 lot of 2205 wrought DSS. The heat treatments were selected to produce a wide range of cooling rates and hold times in order to study the suitability of ASTM A923 to the response of varying amounts on intermetallic phases [117]. The test parameters were identical to those used to develop ASTM A923 for wrought DSS. Charpy V-notch impact samples were extracted from the castings and wrought DSS and tested per ASTM A923 method B (Charpy impact test). Method A (sodium hydroxide etch test) was performed on one half of a fractured Charpy V-notch impact sample and Method C (ferric chloride corrosion weight loss test) was performed on another half. Test results for the three cast lots and one wrought lot indicate that ASTM A923 is relevant for detecting intermetallic phases in cast DSS. In the ASTM A923 round robin study, five laboratories conducted ASTM A923 Methods A & C on cast DSS material and the lab-to-lab reproducibility of the data was determined. Two groups of samples were sent to the participants. Group 1 samples were tested per ASTM A923 Method A, group 2 samples were tested by ASTM A923 Method C. Testing procedures for this round robin study were identical to those used in the ASTM A923 applicability study. Results from this round robin indicate that there is excellent lab-to-lab reproducibility of ASTM A923 with respect to cast DSS and that ASTM A923 could be expanded to cover both wrought and cast DSS. In the ASTM A923 study of the effectiveness of existing foundry solution annealing procedures for producing cast DSS without intermetallic phases, Ten heats of ASTM A890-4A (CD3MN) in the foundry solution annealed condition were tested per ASTM A923 Methods A, B, & C. Testing of these materials per ASTM A923 was used to determine if the foundry solution anneal procedures were adequate to completely eliminate any intermetallic phases, which may have precipitated during the casting and subsequent heat treatment processes. All heats showed no sign of intermetallic phase per Method A, passed minimum Charpy impact energy requirements per Method B (> 40 ft-lbs @ -40�������°C (-40�������°F)), and showed negligible weight loss per Method C (< 10 mdd). These results indicate that the solution annealing procedure used by foundri

  1. China Refrigerator Information Label: Specification Development and Potential Impact

    SciTech Connect (OSTI)

    Fridley, David; Fridley, David; Zheng, Nina; Zhou, Nan; Aden, Nathaniel; Lin, Jiang; Jianhong, Cheng; Sakamoto, Tomoyuki

    2008-02-01T23:59:59.000Z

    In the last five years, China's refrigerator market has grown rapidly, and now urban markets are showing signs of saturation, with ownership rates in urban households reaching 92%. Rural markets continue to grow from a much lower base. As a result of this growth, the Chinese government in 2006 decided to revise the refrigerator standards and its associated efficiency grades for the mandatory energy information label. In the Chinese standards process, the efficiency grades for the information label are tied to the minimum standards. Work on the minimum standards revision began in 2006 and continued through the first half of 2007, when the draft standard was completed under the direction of the China National Institute of Standardization (CNIS). Development of the information label grades required consideration of stakeholder input, continuity with the previous grade classification, ease of implementation, and potential impacts on the market. In this process, CLASP, with the support of METI/IEEJ, collaborated with CNIS to develop the efficiency grades, providing technical input to the process, comment and advice on particular technical issues, and evaluation of the results. After three months of effort and three drafts of the final grade specifications, this work was completed. In addition, in order to effectively evaluate the impact of the label on China's market, CLASP further provided assistance to CNIS to collect data on both the efficiency distribution and product volume distribution of refrigerators on the market. The new information label thresholds to be implemented in 2008 maintain the approach first adopted in 2005 of establishing efficiency levels relative to the minimum standard, but increased the related required efficiency levels by 20% over those established in 2003 and implemented in 2005. The focus of improvement was on the standard refrigerator/freezer (class 5), which constitutes the bulk of the Chinese market. Indeed, the new requirements to achieve grade 1 on the label are now virtually as stringent as those for US Energy Star-qualified or EU A-grade refrigerators. When the energy information label went into effect in March 2005, refrigerator manufacturers were required to display their declared level of efficiency on the label and report it to the China Energy Label Center (CELC), a newly established unit of CNIS responsible for label program management. Because of the visible nature of the label, it was found, through a METI/IEEJ-supported study, that MEPS non-compliance dropped from 4% to zero after the label became mandatory, and that the percentage of higher-grade refrigerators increased. This suggests that the label itself does have potential for shifting the market to higher-efficiency models (Lin 2007). One challenge, however, of assessing this potential impact is the lack of a comprehensive baseline of market efficiency and a program to evaluate the market impact on a yearly basis. As a result, the impact evaluation in this study draws upon the market transformation experience of the related EU energy information label, for which quantitative assessments of its market impact exist. By assuming a parallel process unfolding in China, it is possible to look at the potential impact of the label to 2020. The results of the analysis demonstrates that a robust market transformation program in China focused on the energy information label could save substantial amounts of electricity by 2020, totaling 16.4 TWh annually by that year, compared to a case in which the efficiency distribution of refrigerators was frozen at the 2007 level. Remarkably, the impact of a successful market transformation program with the label would essentially flatten the consumption of electricity for refrigerator use throughout most of the next decade, despite the expectations of continued growth in total stock by nearly 190 million units. At the end of this period, total consumption begins to rise again, as the least efficient of the units have been mostly removed from the market. Such a level of savings would reduce CO{sub

  2. GTPase Activating Specificity of RGS12 and Binding Specificity of an Alternatively Spliced PDZ (PSD-95/Dlg/ZO-1) Domain*

    E-Print Network [OSTI]

    Hall, Randy A

    spliced PDZ domain within RGS12 suggests a mechanism by which RGS proteins may tar- get specific G amino acid motifs at the extreme carboxyl termini of target proteins (reviewed in Ref. 11). PDZ domains

  3. Specific gravities and dry weight relationships of planted slash pine (Pinus elliottii Engelm.) in East Texas

    E-Print Network [OSTI]

    King, Anthony Laurence

    1974-01-01T23:59:59.000Z

    . , Texas ASM University; Chairman of Advisory Committee: Dr. David M, Moehring In this study wood specific gravity values of 220 plantation grown slash pine (Pinus elliottii Engelm. ) trees growing in East Texas were calculated and related to tree... parameters. Also tree dry weight (DW) relationships with tree parameters were determined and dry weight tables calculated. Average specific gravity values of cores and disks at breast height and tree specific gravities respectively were 0. 457, 0. 493...

  4. Preliminary design of the Carrisa Plains solar central receiver power plant. Volume II. Plant specifications

    SciTech Connect (OSTI)

    Price, R. E.

    1983-12-31T23:59:59.000Z

    The specifications and design criteria for all plant systems and subsystems used in developing the preliminary design of Carrisa Plains 30-MWe Solar Plant are contained in this volume. The specifications have been organized according to plant systems and levels. The levels are arranged in tiers. Starting at the top tier and proceeding down, the specification levels are the plant, system, subsystem, components, and fabrication. A tab number, listed in the index, has been assigned each document to facilitate document location.

  5. An improved method for the determination of the wellstream gas specific gravity for retrograde gases

    E-Print Network [OSTI]

    Gold, David Keith

    1988-01-01T23:59:59.000Z

    calculations. The wellstream gas specific gravity for a retrograde gas reservoir can be determined using two methods. The first method requires fluid samples of the primary separator liquid and gas to be obtained from the well, their respective compositions... the most accurate estimate of the wellstream gas specific gravity, but using the field production information can provide a very reliable estimate as well. The equation for calculating the wellstream gas specific gravity using production information...

  6. Advanced systems demonstration for utilization of biomass as an energy source. Volume II. Technical specifications

    SciTech Connect (OSTI)

    None

    1980-10-01T23:59:59.000Z

    This volume contains all of the technical specifications relating to materials and construction of the biomass cogeneration facility in the state of Maine. (DMC)

  7. Final Site-Specific Decommissioning Inspection Report for the University of Washington Research and Test Reactor

    SciTech Connect (OSTI)

    Sarah Roberts

    2006-10-18T23:59:59.000Z

    Report of site-specific decommissioning in-process inspection activities at the University of Washington Research and Test Reactor Facility.

  8. Neuron Specific Rab4 Effector GRASP-1 Coordinates Membrane Specialization and Maturation of Recycling Endosomes

    E-Print Network [OSTI]

    van der Sluijs, Peter

    The endosomal pathway in neuronal dendrites is essential for membrane receptor trafficking and proper synaptic function and plasticity. However, the molecular mechanisms that organize specific endocytic trafficking routes ...

  9. E-Print Network 3.0 - antigen-specific apoptotic bodies Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    online http:arthritis-research.comcontent114R104 Summary: : Intravenous infusion of syngeneic apoptotic cells by photopheresis induces antigen-specific regulatory T...

  10. Manipulation of lignin composition in plants using a tissue-specific...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manipulation of lignin composition in plants using a tissue-specific promoter Re-direct Destination: The present invention relates to methods and materials in the field of...

  11. Elastin Degradation by Matrix Metalloproteinases CLEAVAGE SITE SPECIFICITY AND MECHANISMS OF ELASTOLYSIS*

    E-Print Network [OSTI]

    Mecham, Robert

    . For both the serine and matrix met- alloproteinases, catalysis of peptide bond cleavage in insoluble). Elastases are heterogeneous with differing substrate specificities and cata- lytic mechanisms. In fact

  12. WOODS FOR LEARNING ACTION PLAN 2010-2013 Objective National Indicators Specific actions

    E-Print Network [OSTI]

    WOODS FOR LEARNING ACTION PLAN 2010-2013 Objective National Indicators Specific actions Lead positive inspection reports Develop Forest Kindergarten with nurseries in both private and state sectors

  13. Lung Cancer (2005) 47, 41--47 Improving the specificity of fluorescence

    E-Print Network [OSTI]

    Duin, Robert P.W.

    2005-01-01T23:59:59.000Z

    Lung Cancer (2005) 47, 41--47 Improving the specificity of fluorescence bronchoscopy spectroscopy; Lung cancer; Bronchoscopy Summary Detection of malignancies of the bronchial tree in an early

  14. How to Design and Market Energy Efficiency Programs to Specific Neighborhoods

    Broader source: Energy.gov [DOE]

    This presentation, given through the DOE's Technical Assitance Program (TAP), identifies how to design and market energy efficiency programs to specific neighborhoods.

  15. Uranium Mill Tailings Remedial Action Project (UMTRAP), Slick Rock, Colorado, Revision 1. Bid schedule, special conditions, specifications, and subcontract drawings

    SciTech Connect (OSTI)

    NONE

    1995-10-01T23:59:59.000Z

    This volume contains: bidding requirements; terms and conditions; specifications for Division 1 -- general requirements; specifications for Division 2 -- sitework; specifications for Divisions 5 -- metals; subcontract drawings, (general, Union Carbide processing site, North Continent processing site, and Burro Canyon disposal site).

  16. Impact of AASHTO LRFD bridge design specifications on the design of Type C and AASHTO Type IV girder bridges

    E-Print Network [OSTI]

    Mohammed, Safiuddin Adil

    2007-04-25T23:59:59.000Z

    in the shear models used in the two specifications. The LRFD Specifications use a variable truss analogy based on the Modified Compression Field Theory (MCFT). The Standard Specifications use a constant 45-degree truss analogy method for its shear design...

  17. Microwave beamforming for non-invasive patient-specific hyperthermia treatment of pediatric brain cancer

    E-Print Network [OSTI]

    Sheridan, Jennifer

    -invasive patient-specific hyperthermia treatment of pediatric brain cancer Matthew J Burfeindt1 , Earl Zastrow1 adjuvant to other treatment modalities for a variety of cancers (e.g., Overgaard et al 1995, Kapp 1996, VanMicrowave beamforming for non-invasive patient-specific hyperthermia treatment of pediatric brain

  18. PIR: A Domain Specific Language for Multimedia Retrieval Xiaobing Huang and Tian Zhao

    E-Print Network [OSTI]

    Zhao, Tian

    PIR: A Domain Specific Language for Multimedia Retrieval Xiaobing Huang and Tian Zhao Department for efficiency and cannot be easily adapted for parallelization. In this paper, we present PIR (Pipeline To address these problems, we introduce a domain specific language: PIR 1 for developing MIR applications

  19. Specification of a Component-based Domotic System to Support User-Defined Scenarios

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Specification of a Component-based Domotic System to Support User-Defined Scenarios Fady Hamoui. In this ar- ticle, we propose the specification of a component-based domotic system that tackles this issue Domotic environments are composed of electri- cal / electronic devices connected to a network and con

  20. Development, testing, and applications of site-specific tsunami inundation models for real-time forecasting

    E-Print Network [OSTI]

    can the forecasts completely cover the evolution of earthquake-generated tsunami waves: generationDevelopment, testing, and applications of site-specific tsunami inundation models for real and applications of site-specific tsunami inundation models (forecast models) for use in NOAA's tsunami forecast

  1. Site-specific labeling of cellular proteins with unnatural substrates of biotin ligases

    E-Print Network [OSTI]

    Chen, Irwin

    2007-01-01T23:59:59.000Z

    E. coli biotin ligase (BirA) catalyzes the site-specific ligation of biotin to the lysine within its 15-amino acid peptide substrate (AP). We harnessed the high peptide substrate specificity of BirA to develop a general ...

  2. PhD student in Energy Technology, specifically in New low GWP refrigerants

    E-Print Network [OSTI]

    Kazachkov, Ivan

    PhD student in Energy Technology, specifically in New low GWP refrigerants The School of Industrial, specifically New low GWP refrigerants. KTH is the largest technical university in Sweden. Education and Refrigeration The Division of Applied Thermodynamics and Refrigeration, part of the Department of Energy

  3. Computational Design of a New Hydrogen Bond Network and at Least a 300-fold Specificity

    E-Print Network [OSTI]

    Baker, David

    Computational Design of a New Hydrogen Bond Network and at Least a 300-fold Specificity Switch, conformational strain, and packing defects yielded new binding partners that exhibited specificities of at least of similar structure and sequence. Simple rules to identify protein recognition sites and predict energetic

  4. Final:Realizing Domain-Specific Compiler Optimizations via Generic Programming

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    -level" operations of built-in types; there are no mechanisms for defining domain-specific optimization rules languages (9) and the BroadWay compiler (6), allow more powerful domain-specific optimizations by devising and their operations, and, second, to annotate the programs to indicate where the transformations should apply

  5. Property Specification Patterns for Finite-State Verification* Matthew B. Dwyer George S. Avrunin

    E-Print Network [OSTI]

    Avrunin, George S.

    .g., model checking) provides a powerful means to detect errors that are often subtle and difficult specification, concurrent systems 1 INTRODUCTION Formal specification and verification have been active areas properties of finite-state models of computer systems. Properties are typically specified with temporal lo

  6. UCSB Lab-specific Chemical Hygiene Plan 1 EH&S, Rev. 1/07

    E-Print Network [OSTI]

    Bigelow, Stephen

    UCSB Lab-specific Chemical Hygiene Plan 1 EH&S, Rev. 1/07 Chemical Hygiene Plan (CPH) UCSB MRL Nanomaterials n) SOP for Using Centrifuge #12;UCSB Lab-specific Chemical Hygiene Plan 2 EH&S, Rev. 1/07 1 Laboratory Chemical Hygiene Plan (CHP) paper copy or on line. If you have any questions, please contact

  7. September 2013 Laboratory Safety Manual Appendix C Templates for Lab-Specific Information

    E-Print Network [OSTI]

    Wilcock, William

    your lab's Chemical Hygiene Plan (CHP). These templates are also available as documents which can's CHP consists of the generic UW Laboratory Safety Manual plus your lab's laboratory- specific knows is the location of the laboratory-specific information for your CHP. If you keep electronic copies

  8. Original Paper Abstract: Phosphoinositide-specific phospholipase C (PI-PLC)

    E-Print Network [OSTI]

    Bhattacharyya, Madan Kumar

    Original Paper Abstract: Phosphoinositide-specific phospholipase C (PI-PLC) hydrolyzes the membrane. DNA synthesis, a measure of cell growth, was significantly suppressed by the PI-PLC-specific inhibitor,5-pyrrolidinedione did not cause any suppression. Acti- vation of PI-PLC by MS salts increased DNA synthesis and abol

  9. Sequence Specificity of DNA Alkylation by the Antitumor Natural Product Leinamycin

    E-Print Network [OSTI]

    Gates, Kent. S.

    Sequence Specificity of DNA Alkylation by the Antitumor Natural Product Leinamycin Hong Zang. The sequence specificity for DNA alkylation by this structurally novel compound has not previously been at the 5-G in 5-GG and 5-GT sequences. The sequence preferences for activated leinamycin are significantly

  10. Pairwise Statistical Significance of Local Sequence Alignment Using Sequence-Specific

    E-Print Network [OSTI]

    Pairwise Statistical Significance of Local Sequence Alignment Using Sequence-Specific and Position-Specific Substitution Matrices Ankit Agrawal and Xiaoqiu Huang Abstract--Pairwise sequence alignment is a central problem in bioinformatics, which forms the basis of various other applications. Two related sequences

  11. A Survey of Self-Management in Dynamic Software Architecture Specifications

    E-Print Network [OSTI]

    Bradbury, Jeremy S.

    A Survey of Self-Management in Dynamic Software Architecture Specifications Jeremy S. Bradburya understanding of the foundations of this type of software evolutionary change. In this paper we survey 14 formal specification approaches based on graphs, process algebras, logic, and other formalisms. Our survey

  12. Physics 1114: Unit 7 Homework Use the table in your text for specific heat capacity values.

    E-Print Network [OSTI]

    Mansell, Edward "Ted"

    at 20 C? [Specific heat capacity of air = 703 J/(kg C ) at constant volume.] 7. What is the specific of a heat engine and a heat pump. Include QH, QC, TH, TC, and W. What is the major difference in your two not the same? 6. Determine the maximum coefficient of performance of a heat pump used to heat the inside

  13. Ronald: A Domain-Specific Language to study the interactions between malaria infections and drug

    E-Print Network [OSTI]

    McBurney, Peter

    Ronald: A Domain-Specific Language to study the interactions between malaria infections and drug kills more than 1 million peo- ple a year, mostly children in sub-Saharan Africa. Antimalarial drug-Specific Language to model the fundamental forces driving antimalarial drug resistance including drug

  14. ENERGY-AWARE DATA-CENTRIC MAC FOR APPLICATION-SPECIFIC SENSOR NETWORKS

    E-Print Network [OSTI]

    Islam, M. Saif

    ENERGY-AWARE DATA-CENTRIC MAC FOR APPLICATION-SPECIFIC SENSOR NETWORKS Qing Zhao University an energy-aware data-centric MAC protocol for application-specific large sensor networks. Referred detection, tracking, and estimation. 1.2. Energy-Aware Data-Centric MAC We consider the problem

  15. ABOUT THE JOURNAL The first journal devoted specifically to labor economics, the

    E-Print Network [OSTI]

    Mateo, Jill M.

    ABOUT THE JOURNAL The first journal devoted specifically to labor economics, the Journal of Labor journal of the Society of Labor Economists. Audience Academic, business, and government economists-advertising@press.uchicago.edu Journal of Labor Economics The first journal devoted specifically to labor economics Quarterly 216 pages

  16. Object-Specific Interfaces in Smart Homes Yaser Ghanam, Maha Shouman, Saul Greenberg, and Frank Maurer

    E-Print Network [OSTI]

    Greenberg, Saul

    Object-Specific Interfaces in Smart Homes Yaser Ghanam, Maha Shouman, Saul Greenberg, and Frank, fmaurer}@ucalgary.ca ABSTRACT As smart homes become more widespread, the need for more natural forms and controlling. Author Keywords Smart home, controller, monitor, object-specific, interface, proximity. ACM

  17. NREL scientists confirm the first molecular compound designed specifically to exhibit exciton multiplication.

    E-Print Network [OSTI]

    NREL scientists confirm the first molecular compound designed specifically to exhibit exciton designed with specific properties favorable for singlet fission. The stacking arrangement of molecules. Technical Contact: Justin Johnson, justin.johnson@nrel.gov References: Johnson, J.C.; Nozik, A.J.; Michl, J

  18. Feasibility assessment of a risk-based approach to technical specifications

    SciTech Connect (OSTI)

    Atefi, B.; Gallagher, D.W. (Science Applications International Corp., McLean, VA (USA))

    1991-05-01T23:59:59.000Z

    To assess the potential use of risk and reliability techniques for improving the effectiveness of the technical specifications to control plant operational risk, the Technical Specifications Branch of the Nuclear Regulatory Commission initiated an effort to identify and evaluate alternative risk-based approaches that could bring greater risk perspective to these requirements. In the first phase four alternative approaches were identified and their characteristics were analyzed. Among these, the risk-based approach to technical specifications is the most promising approach for controlling plant operational risk using technical specifications. The second phase of the study concentrated on detailed characteristics of the real time risk-based approach. It is concluded that a real time risk-based approach to technical specifications has the potential to improve both plant safety and availability. 33 figs., 5 figs., 6 tabs.

  19. Specifications Measurement

    E-Print Network [OSTI]

    Wu, Shin-Tson

    -performance Dell PC with 17-inch LCD monitor Software ZYGO MetroPro software running under Microsoft Windows XP, transparent, coated, uncoated, specular, and nonspecular Maximum Size (H x W x D) 3.5 x 8 x 8 in. (89 x 203 x stages), 400 watts (motorized stages) Compressed Air 60 to 80 psi (4.1 to 5.5 bar); dry and filtered

  20. General Specifications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to these pads to the south-east and south- west will allow crane delivery of a fork-lift truck and initial or replacement transformers from points outside the synchrotron...

  1. Technical Specifications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructureProposedPAGESafety Tag:8,, 20153 To.T. J. KulpP.T.

  2. Santander (Spain), July 1-5, 2008 Laforcade-Zendagui-Barr 1 Supporting the Specification ofSupporting the Specification of

    E-Print Network [OSTI]

    Laforcade, Pierre

    Santander (Spain), July 1-5, 2008 Laforcade-Zendagui-Barré 1 Supporting the Specification of #12;Santander (Spain), July 1-5, 2008 Laforcade-Zendagui-Barré 2 Outline 1. Research context. Summary and ongoing work #12;Santander (Spain), July 1-5, 2008 Laforcade-Zendagui-Barré 3 Research Context

  3. HOW TO DEVELOP LAB-SPECIFIC TRAINING University of Maryland Chemical Hygiene Plan requires that all lab members be trained on the specific

    E-Print Network [OSTI]

    Rubloff, Gary W.

    HOW TO DEVELOP LAB-SPECIFIC TRAINING SUMMARY University of Maryland Chemical Hygiene Plan requires for each new lab member. At minimum should include completion of: Chemical Hygiene Training for Laboratory OPERATIONS Know the Chemical Hygiene Plan SOP requirements and the lab's process for developing and reviewing

  4. Programme specification for MPhil in Engineering for Sustainable Development Please note: This specification provides a concise summary of the main features of the programme and the learning

    E-Print Network [OSTI]

    de Gispert, Adrià

    Programme specification for MPhil in Engineering for Sustainable Development Please note change from year to year to reflect emerging themes in the sustainable development debate. 1. Awarding for Sustainable Development 6. UCAS code n/a Application direct through CU Board of Graduate Studies 7. Relevant

  5. Ranacyclins, a New Family of Short Cyclic Antimicrobial Peptides: Biological Function, Mode of Action, and Parameters Involved in Target Specificity,,@

    E-Print Network [OSTI]

    Pompeu Fabra, Universitat

    of Action, and Parameters Involved in Target Specificity,,@ M. Luisa Mangoni, Niv Papo,§ Giuseppina Mignogna

  6. Ion-Specific Hydration Effects: Extending the Poisson-Boltzmann Theory

    E-Print Network [OSTI]

    Dan Ben-Yaakov; David Andelman; Rudi Podgornik; Daniel Harries

    2011-03-23T23:59:59.000Z

    In aqueous solutions, dissolved ions interact strongly with the surrounding water, thereby modifying the solution properties in an ion-specific manner. These ion-hydration interactions can be accounted for theoretically on a mean-field level by including phenomenological terms in the free energy that correspond to the most dominant ion-specific interactions. Minimizing this free energy leads to modified Poisson-Boltzmann equations with appropriate boundary conditions. Here, we review how this strategy has been used to predict some of the ways ion-specific effects can modify the forces acting within and between charged interfaces immersed in salt solutions.

  7. Computer-assisted mosaic arthroplasty using patient-specific instrument guides

    E-Print Network [OSTI]

    Waldman, Stephen D.

    position- ing using patient-specific instrument guides manufactured on a 3D printer. Methods Using a 3D was planned on the computer. Instrument guides were manufactured in thermoplastic on a 3D printer; the bottom

  8. adverse event-specific grading: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 TESLA: A Formally Defined Event Specification Language Gianpaolo Cugola Computer...

  9. Specificity and randomness in the visual cortex Kenichi Ohki and R Clay Reid

    E-Print Network [OSTI]

    Born, Richard

    Specificity and randomness in the visual cortex Kenichi Ohki and R Clay Reid Research 02115, USA Corresponding author: Reid, R Clay (clay_reid@hms.harvard.edu) Current Opinion

  10. Laboratory-Specific-Documentation-HHN.docx CHP updated 8/21/13 Virginia Tech

    E-Print Network [OSTI]

    Crawford, T. Daniel

    Laboratory-Specific-Documentation-HHN.docx CHP updated 8/21/13 Virginia Tech Chemistry Department Chemical Hygiene Plan This CHP applies to rooms Current worker beginning a new task Reviewing a revised edition of the CHP 1

  11. Site-Specific Laser Modification of MgO nanoclusters: Towards...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laser Modification of MgO nanoclusters: Towards Atomic-Scale Surface Structuring. Site-Specific Laser Modification of MgO nanoclusters: Towards Atomic-Scale Surface Structuring....

  12. PROGRAMME SPECIFICATION POSTGRADUATE PROGRAMMES Programme name Energy and Environmental Technology and

    E-Print Network [OSTI]

    Weyde, Tillman

    towards individuals and industries concerned with investment in energy and environmental technologies: Knowledge and understanding: Explain the technologies for energy production: fossil fuels, nuclear1 PROGRAMME SPECIFICATION ­ POSTGRADUATE PROGRAMMES KEY FACTS Programme name Energy

  13. Therapeutic efficacy of potent neutralizing HIV-1-specific monoclonal antibodies in SHIV-infected rhesus monkeys

    E-Print Network [OSTI]

    Barouch, Dan H.

    Human immunodeficiency virus type 1 (HIV-1)-specific monoclonal antibodies with extraordinary potency and breadth have recently been described. In humanized mice, combinations of monoclonal antibodies have been shown to ...

  14. A Domain-Specific Safety Analysis for Digital Nuclear Plant Protection Systems

    E-Print Network [OSTI]

    Specification method - NuSCR(3) 9 [k_VAR_OVER_PWR_Trip_Dly, k_VAR_OVER_PWR_Trip_Dly] th_VAR_OVER_PWR_Trip_Logic := k_TRUE #12;NUFTA 10 #12;Overview of Nu

  15. Municipal Consortium Releases Updated Model Specification for Networked Outdoor Lighting Control Systems

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's Municipal Solid-State Street Lighting Consortium (MSSLC) has released an update to its Model Specification for Adaptive Control and Remote Monitoring of LED Roadway...

  16. E-Print Network 3.0 - antigen-specific cancer immunotherapeutic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and differentiation of tumor-avid, antigen-specific T cells ex vivo followed by re-infusion into the host 8. Natural... for their clinical use 9. The use of DC for ex vivo...

  17. E-Print Network 3.0 - antigen-specific polyclonal cytotoxic Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APCs expressing ligands... transfer of cytotoxic T lymphocytes (CTLs) (33,34). The infusion of antigen-specific CD8+ cells... 1 MHC Class II Tetramers and the Pursuit of ......

  18. Energy Sector-Specific Plan: An Annex to the National Infrastructure...

    Energy Savers [EERE]

    Plan: An Annex to the National Infrastructure Protection Plan In its role as the lead Sector-Specific Agency for the Energy Sector, the Department of Energy has worked...

  19. Guidelines for Home Energy Upgrade Professionals: Standard Work Specifications for Multifamily Energy Upgrades (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-08-01T23:59:59.000Z

    This fact sheet provides essential information about the 2011 publication of the Workforce Guidelines for Multifamily Home Energy Upgrades, including their origin, their development with the help of industry leaders to create the standard work specifications for retrofit work.

  20. SUPPORTING DOMAIN SPECIFIC WEB-BASED SEARCH USING HEURISTIC KNOWLEDGE EXTRACTION 

    E-Print Network [OSTI]

    Gunanathan, Sudharsan

    2010-01-16T23:59:59.000Z

    Modern search engines like Google support domain-independent search over the vast information contained in web documents. However domain-specific information access, such as finding less well-known people, locations, and ...

  1. New correlations for dew-point, specific gravity and producing yield for gas condensates

    E-Print Network [OSTI]

    Ovalle Cortissoz, Adriana Patricia

    2002-01-01T23:59:59.000Z

    This work presents four newly developed correlations to estimate dew-point pressure, current specific gravity and producing yield of gas condensate reservoirs. The first correlation may be used to predict the dew-point pressure of the reservoir gas...

  2. INTEGRATING A FORMAL SPECIFICATION COURSE WITH A SOFIWARE PROJECTS COURSE VIA AN EDITING TOOL

    E-Print Network [OSTI]

    Gamble, R. F.

    .F. Gamble Department of Mathematical and Computer Sciences The University of Tulsa Tulsa, OK 74104 email of Tulsa currently includes two courses: a formal specification course taught with the language Z [12

  3. Functional specificity for high-level linguistic processing in the human brain

    E-Print Network [OSTI]

    Fedorenko, Evelina G.

    Neuroscientists have debated for centuries whether some regions of the human brain are selectively engaged in specific high-level mental functions or whether, instead, cognition is implemented in multifunctional brain ...

  4. THE UNIVERSITY OF EDINBURGH PROGRAMME SPECIFICATION M.A. Honours in

    E-Print Network [OSTI]

    Edinburgh, University of

    , the economic, environmental, ethical, legal, political, sociological and technological context in which and their environment. Students study organizational policies, strategic planning, employment relations, finance, marketing and technology. 1 The information contained in this Programme Specification should be used

  5. Engineering Enzyme Specificity Using Computational Design of a Defined-Sequence Library

    E-Print Network [OSTI]

    Lippow, Shaun M.

    Engineered biosynthetic pathways have the potential to produce high-value molecules from inexpensive feedstocks, but a key limitation is engineering enzymes with high activity and specificity for new reactions. Here, we ...

  6. Dynamic and specific interaction between synaptic NR2-NMDA receptor and PDZ proteins

    E-Print Network [OSTI]

    Bard, Lucie

    The relative content of NR2 subunits in the NMDA receptor confers specific signaling properties and plasticity to synapses. However, the mechanisms that dynamically govern the retention of synaptic NMDARs, in particular ...

  7. Development of a Model Specification for Performance MonitoringSystems for Commercial Buildings

    SciTech Connect (OSTI)

    Haves, Philip; Hitchcock, Robert J.; Gillespie, Kenneth L.; Brook, Martha; Shockman, Christine; Deringer, Joseph J.; Kinney,Kristopher L.

    2006-08-01T23:59:59.000Z

    The paper describes the development of a model specification for performance monitoring systems for commercial buildings. The specification focuses on four key aspects of performance monitoring: (1) performance metrics; (2) measurement system requirements; (3) data acquisition and archiving; and (4) data visualization and reporting. The aim is to assist building owners in specifying the extensions to their control systems that are required to provide building operators with the information needed to operate their buildings more efficiently and to provide automated diagnostic tools with the information required to detect and diagnose faults and problems that degrade energy performance. The paper reviews the potential benefits of performance monitoring, describes the specification guide and discusses briefly the ways in which it could be implemented. A prototype advanced visualization tool is also described, along with its application to performance monitoring. The paper concludes with a description of the ways in which the specification and the visualization tool are being disseminated and deployed.

  8. Letter Fluency in Motor Neurone Disease: Is there a specific action word deficit? 

    E-Print Network [OSTI]

    Fawns-Ritchie, Chloe

    2013-03-13T23:59:59.000Z

    Recent studies have demonstrated that there is a specific verb, or action word, deficit in patients with a comorbid diagnosis of Motor Neurone Disease (MND) and dementia of the frontotemporal type. However, there has been less research examining...

  9. Species-specific patterns in bivalve larval supply to a coastal embayment

    E-Print Network [OSTI]

    Thompson, Christine Mingione

    2011-01-01T23:59:59.000Z

    Larval supply is an important process linking reproductive output to recruitment of benthic marine invertebrates. Few species-specific studies of bivalve larvae have been performed due to the lack of suitable methods for ...

  10. New correlations for dew-point, specific gravity and producing yield for gas condensates 

    E-Print Network [OSTI]

    Ovalle Cortissoz, Adriana Patricia

    2002-01-01T23:59:59.000Z

    This work presents four newly developed correlations to estimate dew-point pressure, current specific gravity and producing yield of gas condensate reservoirs. The first correlation may be used to predict the dew-point pressure of the reservoir gas...

  11. Computational design of a red fluorophore ligase for site-specific protein labeling in living cells

    E-Print Network [OSTI]

    Drennan, Catherine L.

    Chemical fluorophores offer tremendous size and photophysical advantages over fluorescent proteins but are much more challenging to target to specific cellular proteins. Here, we used Rosetta-based computation to design a ...

  12. affects group-specific prevalence: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Toyokawa B; M. Momoeda A; Y. Taketani A 2004-01-01 2 EJB 3.0 Expert Group Specification Lead Computer Technologies and Information Sciences Websites Summary: EJB 3.0 Expert Group...

  13. Direct and specific chemical control of eukaryotic translation with a synthetic RNA–protein interaction

    E-Print Network [OSTI]

    Goldfless, Stephen Jacob

    Sequence-specific RNA–protein interactions, though commonly used in biological systems to regulate translation, are challenging to selectively modulate. Here, we demonstrate the use of a chemically-inducible RNA–protein ...

  14. Knowledge-based Specification of Robot Motions Moritz Tenorth and Georg Bartels and Michael Beetz1

    E-Print Network [OSTI]

    Knowledge-based Specification of Robot Motions Moritz Tenorth and Georg Bartels and Michael Beetz1, Germany E-mail: {tenorth, georg.bartels, beetz}@cs.uni-bremen.de Figure 1. Two views of a pouring task

  15. On-Chip Activation and Subsequent Detection of Individual Antigen-Specific T Cells

    E-Print Network [OSTI]

    Song, Qing

    The frequencies of antigen-specific CD4+ T cells in samples of human tissue have been difficult to determine accurately ex vivo, particularly for autoimmune diseases such as multiple sclerosis or type 1 diabetes. Conventional ...

  16. Measurement and Model Validation of Nanofluid Specific Heat Capacity with Differential Scanning Calorimetry

    E-Print Network [OSTI]

    O'Hanley, Harrison F.

    Nanofluids are being considered for heat transfer applications; therefore it is important to know their thermophysical properties accurately. In this paper we focused on nanofluid specific heat capacity. Currently, there ...

  17. Guidelines for Home Energy Professionals: Standard Work Specifications for Single-Family Home Energy Upgrades

    Broader source: Energy.gov [DOE]

    The Standard Work Specifications (SWS) for Single-Family Home Energy Upgrades define the minimum acceptable outcomes for any weatherization or home performance task to be effective, durable, and safe.

  18. Past tense and past participle verb use in young children with and without Specific Language Impairment

    E-Print Network [OSTI]

    Echelbarger, Margaret

    2013-08-31T23:59:59.000Z

    Finiteness marking is an area of weakness in specific language impairment (SLI) and two hypotheses attempt to account for this difficulty. The Extended Optional Infinitive (EOI) account proposes that SLI children have ...

  19. Early usage of DO in children with and without Specific Language Impairment

    E-Print Network [OSTI]

    Blossom, Megan Stratton

    2009-09-15T23:59:59.000Z

    This study examined the early uses of DO in the spontaneous language samples of 89 children, 37 with Specific Language Impairment, age 5;0-5;6, 37 age-equivalent control children, and 15 language-equivalent control children, ...

  20. The Interface between the Lexicon and Finiteness Marking in Specific Language Impairment

    E-Print Network [OSTI]

    Hoover, Jill

    2009-12-14T23:59:59.000Z

    Inconsistent omission of finiteness markers is a clinical marker for Specific Language Impairment (SLI). A similar pattern of omission is observed during normal development. Potential limiting factors during this stage of ...

  1. A STRUCTURED METHOD FOR THE REAL QUADRATIC EIGENVALUE PROBLEM FOR SPECIFIC GYROSCOPIC SYSTEMS

    E-Print Network [OSTI]

    Rush, Wade

    2008-12-15T23:59:59.000Z

    This study examines a specific numerical approach that computes the eigenvalues (normal modes) of a Quadratic Eigenvalue Problem (QEP) of the form (&lambda^2 & middotI + &lambda · B + C)· x = 0 where B is constrained to a ...

  2. Site specific mutagenesis study of the protein folding process of luciferase

    E-Print Network [OSTI]

    Wei, Ke

    1990-01-01T23:59:59.000Z

    SITE SPECIFIC MUTAGENESIS STUDY OF THE PROTEIN FOLDING PROCESS OF LUCIFERASE A Thesis KE WEI Submitted to the Office of Graduate Studies of Texas A8 M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... MAY 1990 Major Subject: Genetics SITE SPECIFIC MUTAGENESIS STUDY OF THE PROTEIN FOLDING PROCESS OF LUCIFERASE A Thesis by KE WEI Approved as to style and content by: T. O. aldwin ( Chair of Committee ) C. N. Pace ( Member ) M. D. Manson...

  3. D-Aminoacylases and Dipeptidases within the Amidohydrolase Superfamily: Relationship Between Enzyme Structure and Substrate Specificity

    E-Print Network [OSTI]

    Cummings, Jennifer Ann

    2012-02-14T23:59:59.000Z

    the Amidohydrolase Superfamily: Relationship Between Enzyme Structure and Substrate Specificity. (December 2010) Jennifer Ann Cummings, B.S., Southern Oregon University; M.S., Texas A&M University Chair of Advisory Committee: Dr. Frank Raushel Approximately... dipeptide libraries ........... 92 3.3 C-terminal specificity of Sco3058 with seven dipeptide libraries .......... 93 3.4 Inhibition plots for Sco3058 with pseudodipeptide mimics .................... 96 3.5 Ribbon diagram of the Sco3058 structure...

  4. Standard Work Specifications for Single-Family Home Energy Upgrades Summary (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-11-01T23:59:59.000Z

    The U.S. Department of Energy (DOE), the National Renewable Energy Laboratory (NREL) and numerous industry stakeholders developed the Standard Work Specifications for Single-Family Home Energy Upgrades to define the minimum requirements for high-quality residential energy upgrades. Today, the Standard Work Specifications provide a unique source for defining high-quality home energy upgrades, establishing clear expectations for homeowners, contractors, trainers, workers, program administrators, and organizations that provide financing for energy upgrades.

  5. UCSB Lab-specific Chemical Hygiene Plan 1 EH&S, Rev. 1/07

    E-Print Network [OSTI]

    Akhmedov, Azer

    UCSB Lab-specific Chemical Hygiene Plan 1 EH&S, Rev. 1/07 Chemical Hygiene Plan (CPH) UCSB MRL for Using Engineered Nanomaterials n) SOP for Using Centrifuge #12;UCSB Lab-specific Chemical Hygiene Plan 2://www.mrl.ucsb.edu/mrl/info/administration/mrlsafety.html 2. The Polymer Laboratory Chemical Hygiene Plan (CHP) paper copy or on line. If you have any

  6. Engineering aspects of site-specific oil spill contingency planning for estuaries 

    E-Print Network [OSTI]

    James, David Woody

    1984-01-01T23:59:59.000Z

    ENGINEERING ASPECTS OF SITE-SPECIFIC OIL SPILL CONTINGENCY PLANNING FOR ESTUARIES A Thesis by DAVID WOODY JAMES Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE May 1984 Major Subject: Civil Engineering ENGINEERING ASPECTS OP SITE-SPECIFIC OIL SPILL CONTINGENCY PLANNING FOR ESTDARIES A Thesis by DAVID WOODY JAMES Approved as to style and content by: Dr. Ro W. Bann, Jr. (Chairman of Committee) Dr...

  7. Overall plant design specification Modular High Temperature Gas-cooled Reactor. Revision 9

    SciTech Connect (OSTI)

    NONE

    1990-05-01T23:59:59.000Z

    Revision 9 of the ``Overall Plant Design Specification Modular High Temperature Gas-Cooled Reactor,`` DOE-HTGR-86004 (OPDS) has been completed and is hereby distributed for use by the HTGR Program team members. This document, Revision 9 of the ``Overall Plant Design Specification`` (OPDS) reflects those changes in the MHTGR design requirements and configuration resulting form approved Design Change Proposals DCP BNI-003 and DCP BNI-004, involving the Nuclear Island Cooling and Spent Fuel Cooling Systems respectively.

  8. Mode specificity in the HF + OH ? F + H{sub 2}O reaction

    SciTech Connect (OSTI)

    Song, Hongwei; Li, Jun; Guo, Hua, E-mail: hguo@unm.edu [Department of Chemistry and Chemical Biology, University of New Mexico, Albuquerque, New Mexico 87131 (United States)

    2014-10-28T23:59:59.000Z

    Full-dimensional quantum dynamics and quasi-classical trajectory calculations are reported for the title reaction on a recently constructed ab initio based global potential energy surface. Strong mode specificity was found, consistent with the prediction of the sudden vector projection model. Specifically, the HF vibration strongly promotes the reaction while the OH vibration has little effect. Rotational excitations of both reactants slightly enhance the reaction.

  9. Examining the specific entropy (density of adiabatic invariants) of the outer electron radiation belt

    SciTech Connect (OSTI)

    Borovsky, Joseph E [Los Alamos National Laboratory; Denton, Michael H [LANCASTER UNIV

    2008-01-01T23:59:59.000Z

    Using temperature and number-density measurements of the energetic-electron population from multiple spacecraft in geosynchronous orbit, the specific entropy S = T/n{sup 2/3} of the outer electron radiation belt is calculated. Then 955,527 half-hour-long data intervals are statistically analyzed. Local-time and solar-cycle variations in S are examined. The median value of the specific entropy (2.8 x 10{sup 7} eVcm{sup 2}) is much larger than the specific entropy of other particle populations in and around the magnetosphere. The evolution of the specific entropy through high-speed-stream-driven geomagnetic storms and through magnetic-cloud-driven geomagnetic storms is studied using superposed-epoch analysis. For high-speed-stream-driven storms, systematic variations in the entropy associated with electron loss and gain and with radiation-belt heating are observed in the various storm phases. For magnetic-cloud-driven storms, multiple trigger choices for the data superpositions reveal the effects of interplanetary shock arrival, sheath driving, cloud driving, and recovery phase. The specific entropy S = T/n{sup 2/3} is algebraically expressed in terms of the first and second adiabatic invariants of the electrons: this allows a relativistic expression for S in terms of T and n to be derived. For the outer electron radiation belt at geosynchronous orbit, the relativistic corrections to the specific entropy expression are -15%.

  10. Comparing Supply-Side Specifications in Models of Global Agriculture and the Food System

    SciTech Connect (OSTI)

    Robinson, Sherman; van Meijl, Hans; Willenbockel, Dirk; Valin, Hugo; Fujimori, Shinichiro; Masui, Toshihiko; Sands, Ronald; Wise, Marshall A.; Calvin, Katherine V.; Havlik, Petr; Mason d'Croz, Daniel; Tabeau, Andrzej; Kavallari, Aikaterini; Schmitz, Christoph; Dietrich, Jan P.; von Lampe, Martin

    2014-01-01T23:59:59.000Z

    This paper compares the theoretical specification of production and technical change across the partial equilibrium (PE) and computable general equilibrium (CGE) models of the global agricultural and food system included in the AgMIP model comparison study. The two modeling approaches have different theoretical underpinnings concerning the scope of economic activity they capture and how they represent technology and the behavior of supply and demand in markets. This paper focuses on their different specifications of technology and supply behavior, comparing their theoretical and empirical treatments. While the models differ widely in their specifications of technology, both within and between the PE and CGE classes of models, we find that the theoretical responsiveness of supply to changes in prices can be similar, depending on parameter choices that define the behavior of supply functions over the domain of applicability defined by the common scenarios used in the AgMIP comparisons. In particular, we compare the theoretical specification of supply in CGE models with neoclassical production functions and PE models that focus on land and crop yields in agriculture. In practice, however, comparability of results given parameter choices is an empirical question, and the models differ in their sensitivity to variations in specification. To illustrate the issues, sensitivity analysis is done with one global CGE model, MAGNET, to indicate how the results vary with different specification of technical change, and how they compare with the results from PE models.

  11. The role of packaging sites in efficient and specific virus assembly

    E-Print Network [OSTI]

    J. D. Perlmutter; M. F. Hagan

    2015-02-17T23:59:59.000Z

    During the lifecycle of many single-stranded RNA viruses, including many human pathogens, a protein shell called the capsid spontaneously assembles around the viral genome. Understanding the mechanisms by which capsid proteins selectively assemble around the viral RNA amidst diverse host RNAs is a key question in virology. In one proposed mechanism, sequence elements (packaging sites) within the genomic RNA promote rapid and efficient assembly through specific interactions with the capsid proteins. In this work we develop a coarse-grained particle-based computational model for capsid proteins and RNA which represents protein-RNA interactions arising both from non-specific electrostatics and specific packaging sites interactions. Using Brownian dynamics simulations, we explore how the efficiency and specificity of assembly depend on solution conditions (which control protein-protein and nonspecific protein-RNA interactions) as well as the strength and number of packaging sites. We identify distinct regions in parameter space in which packaging sites lead to highly specific assembly via different mechanisms, and others in which packaging sites lead to kinetic traps. We relate these computational predictions to in vitro assays for specificity in which cognate viral RNAs are compete against non-cognate RNAs for assembly by capsid proteins.

  12. Certification of alternative aviation fuels and blend components

    SciTech Connect (OSTI)

    Wilson III, George R. (Southwest Research Institute, 6220 Culebra Road, San Antonio, Texas 78238 (United States)); Edwards, Tim; Corporan, Edwin (United States Air Force Research Laboratory, Wright-Patterson Air Force Base, Ohio 45433 (United States)); Freerks, Robert L. (Rentech, Incorporated, 1331 17th Street, Denver, Colorado 80202 (United States))

    2013-01-15T23:59:59.000Z

    Aviation turbine engine fuel specifications are governed by ASTM International, formerly known as the American Society for Testing and Materials (ASTM) International, and the British Ministry of Defence (MOD). ASTM D1655 Standard Specification for Aviation Turbine Fuels and MOD Defence Standard 91-91 are the guiding specifications for this fuel throughout most of the world. Both of these documents rely heavily on the vast amount of experience in production and use of turbine engine fuels from conventional sources, such as crude oil, natural gas condensates, heavy oil, shale oil, and oil sands. Turbine engine fuel derived from these resources and meeting the above specifications has properties that are generally considered acceptable for fuels to be used in turbine engines. Alternative and synthetic fuel components are approved for use to blend with conventional turbine engine fuels after considerable testing. ASTM has established a specification for fuels containing synthesized hydrocarbons under D7566, and the MOD has included additional requirements for fuels containing synthetic components under Annex D of DS91-91. New turbine engine fuel additives and blend components need to be evaluated using ASTM D4054, Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives. This paper discusses these specifications and testing requirements in light of recent literature claiming that some biomass-derived blend components, which have been used to blend in conventional aviation fuel, meet the requirements for aviation turbine fuels as specified by ASTM and the MOD. The 'Table 1' requirements listed in both D1655 and DS91-91 are predicated on the assumption that the feedstocks used to make fuels meeting these requirements are from approved sources. Recent papers have implied that commercial jet fuel can be blended with renewable components that are not hydrocarbons (such as fatty acid methyl esters). These are not allowed blend components for turbine engine fuels as discussed in this paper.

  13. Energy star product specification development framework: Using data and analysis to make program decisions

    SciTech Connect (OSTI)

    McWhinney, Marla; Fanara, Andrew; Clark, Robin; Hershberg, Craig; Schmeltz, Rachel; Roberson, Judy

    2003-09-12T23:59:59.000Z

    The Product Development Team (PD) in the US Environmental Protection Agency's ENERGY STAR Labeling Program fuels the long-term market transformation process by delivering new specifications. PD's goal is to expand the reach and visibility of ENERGY STAR as well as the market for new energy-efficient products. Since 2000, PD has launched nine new ENERGY STAR specifications and continues to evaluate new program opportunities. To evaluate the ENERGY STAR carbon savings potential for a diverse group of products, PD prepared a framework for developing new and updating existing specifications that rationalizes new product opportunities and draws upon the expertise and resources of other stakeholders, including manufacturers, utilities, environmental groups and other government agencies. By systematically reviewing the potential of proposed product areas, PD makes informed decisions as to whether or not to proceed with developing a specification. In support of this strategy, PD ensures that new product specifications are consistent with the ENERGY STAR guidelines and that these guidelines are effectively communicated to stakeholders during the product development process. To date, the framework has been successful in providing consistent guidance on collecting the necessary information on which to base sound program decisions. Through the application of this framework, PD increasingly recognizes that each industry has unique market and product characteristics that can require reconciliation with the ENERGY STAR guidelines. The new framework allows PD to identify where reconciliation is needed to justify program decisions.

  14. Allele-specific enzymatic amplification of. beta. -globin genomic DNA for diagnosis of sickle cell anemia

    SciTech Connect (OSTI)

    Wu, D.Y.; Ugozzoli, L.; Pal, B.K.; Wallace, B. (Beckman Research Institute of the City of Hope, Duarte, CA (USA))

    1989-04-01T23:59:59.000Z

    A rapid nonradioactive approach to the diagnosis of sickle cell anemia is described based on an allele-specific polymerase chain reaction (ASPCR). This method allows direct detection of the normal or the sickle cell {beta}-globin allele in genomic DNA without additional steps of probe hybridization, ligation, or restriction enzyme cleavage. Two allele-specific oligonucleotide primers, one specific for the sickle cell allele and one specific for the normal allele, together with another primer complementary to both alleles were used in the polymerase chain reaction with genomic DNA templates. The allele-specific primers differed from each other in their terminal 3{prime} nucleotide. Under the proper annealing temperature and polymerase chain reaction conditions, these primers only directed amplification on their complementary allele. In a single blind study of DNA samples from 12 individuals, this method correctly and unambiguously allowed for the determination of the genotypes with no false negatives or positives. If ASPCR is able to discriminate all allelic variation (both transition and transversion mutations), this method has the potential to be a powerful approach for genetic disease diagnosis, carrier screening, HLA typing, human gene mapping, forensics, and paternity testing.

  15. The risks and consequences from the transport of low specific activity materials by truck

    SciTech Connect (OSTI)

    Finley, N.C.; McClure, J.D.; Cashwell, J.W.; Ostmeyer, R.O.; Wangler, M.

    1989-01-01T23:59:59.000Z

    The packaging and transport category of low specific activity (LSA) material was conceived for radioactive materials (RAM) that were considered inherently safe for transport. Such materials could be transported in ''strong, tight'' packages. The primary concern for the radionuclide content in LSA materials was associated with the potential for inhalation of particulate radioactive material. Thus, the specifications for the category in terms of specific activity were structured to preclude excessive inhalation hazard. The current version of the International Atomic Energy Agency (IAEA) regulations maintains the inhalation-related limits but also shows concern that the restrictions on the LSA category may not preclude an excessive external radiation hazard for gamma-emitting materials. This paper presents the results of an investigation of the potential for such excessive external radiation hazards, particularly for LSA materials with specific activity levels near the current regulatory limit. Analyses are discussed that were performed to evaluate the potential radiological impacts of highway accidents leading to the release of high radiation level-low specific activity (HRL-LSA) materials from their packagings. The results of the analyses are intended to provide a basis for evaluating restrictions on the quantity of gamma-emitting radionuclides that can be contained in an LSA shipment. 8 refs., 2 tabs.

  16. Device for detecting the specific gravity of a liquid. [Patent application

    DOE Patents [OSTI]

    Derouin, C.R.; Kerwin, W.J.; McCormick, J.B.; Bobbett, R.E.

    1980-11-18T23:59:59.000Z

    A device for detecting the specific gravity of a liquid and a device for detecting the state of charge of a liquid phase electrolyte battery are described. In one embodiment of the present invention, a change in the critical angle of total internal reflection is utilized to determine the index of refraction of the liquid to be measured. It is shown that the index of refraction of the liquid is a function of the specific gravity of the liquid. In applications for measuring the state of charge of a battery, the specific gravity is proportional to the state of charge of the battery. A change in intensity of rays intersecting an interface surface indicates the critical angle which is a direct indication of the specific gravity of the liquid and the state of charge of a battery. In another embodiment, a light beam is projected through a transparent medium and then through a portion of the liquid to be measured. A change in refraction due to a change in the index of refraction of the liquid produces a deflection of the beam which is measured by a detector. The magnitude of deflection of the beam is directly proportional to the specific gravity of the liquid and the state of charge of a battery.

  17. A Specification Logic for Termination Reasoning Ton-Chanh Le, Cristian Gherghina, Aquinas Hobor, and Wei-Ngan Chin

    E-Print Network [OSTI]

    Hobor, Aquinas

    A Specification Logic for Termination Reasoning Ton-Chanh Le, Cristian Gherghina, Aquinas Hobor a logical framework for specifying and proving asser- tions about program termination. Although termination. Here we propose to integrate termination requirements directly into our specification logic

  18. Validation of the Revised Children's Manifest Anxiety Scale, Second Edition (RCMAS-2) Scores for Children with Specific Learning Disabilities

    E-Print Network [OSTI]

    Raad, Jennifer Marie

    2013-08-31T23:59:59.000Z

    Specific learning disabilities are one of the most common and debilitating disorders experienced by children and adolescents, and students with specific learning disabilities may be particularly vulnerable to anxiety. The ...

  19. A Novel Combined Term Suggestion Service for Domain-Specific Digital Libraries

    E-Print Network [OSTI]

    Hienert, Daniel; Schaible, Johann; Mayr, Philipp

    2011-01-01T23:59:59.000Z

    Interactive query expansion can assist users during their query formulation process. We conducted a user study with over 4,000 unique visitors and four different design approaches for a search term suggestion service. As a basis for our evaluation we have implemented services which use three different vocabularies: (1) user search terms, (2) terms from a terminology service and (3) thesaurus terms. Additionally, we have created a new combined service which utilizes thesaurus term and terms from a domain-specific search term re-commender. Our results show that the thesaurus-based method clearly is used more often compared to the other single-method implementations. We interpret this as a strong indicator that term suggestion mechanisms should be domain-specific to be close to the user terminology. Our novel combined approach which interconnects a thesaurus service with additional statistical relations out-performed all other implementations. All our observations show that domain-specific vocabulary can support...

  20. Porous silicon structures with high surface area/specific pore size

    DOE Patents [OSTI]

    Northrup, M. Allen (Berkeley, CA); Yu, Conrad M. (Antioch, CA); Raley, Norman F. (Danville, CA)

    1999-01-01T23:59:59.000Z

    Fabrication and use of porous silicon structures to increase surface area of heated reaction chambers, electrophoresis devices, and thermopneumatic sensor-actuators, chemical preconcentrates, and filtering or control flow devices. In particular, such high surface area or specific pore size porous silicon structures will be useful in significantly augmenting the adsorption, vaporization, desorption, condensation and flow of liquids and gasses in applications that use such processes on a miniature scale. Examples that will benefit from a high surface area, porous silicon structure include sample preconcentrators that are designed to adsorb and subsequently desorb specific chemical species from a sample background; chemical reaction chambers with enhanced surface reaction rates; and sensor-actuator chamber devices with increased pressure for thermopneumatic actuation of integrated membranes. Examples that benefit from specific pore sized porous silicon are chemical/biological filters and thermally-activated flow devices with active or adjacent surfaces such as electrodes or heaters.

  1. Porous silicon structures with high surface area/specific pore size

    DOE Patents [OSTI]

    Northrup, M.A.; Yu, C.M.; Raley, N.F.

    1999-03-16T23:59:59.000Z

    Fabrication and use of porous silicon structures to increase surface area of heated reaction chambers, electrophoresis devices, and thermopneumatic sensor-actuators, chemical preconcentrates, and filtering or control flow devices. In particular, such high surface area or specific pore size porous silicon structures will be useful in significantly augmenting the adsorption, vaporization, desorption, condensation and flow of liquids and gases in applications that use such processes on a miniature scale. Examples that will benefit from a high surface area, porous silicon structure include sample preconcentrators that are designed to adsorb and subsequently desorb specific chemical species from a sample background; chemical reaction chambers with enhanced surface reaction rates; and sensor-actuator chamber devices with increased pressure for thermopneumatic actuation of integrated membranes. Examples that benefit from specific pore sized porous silicon are chemical/biological filters and thermally-activated flow devices with active or adjacent surfaces such as electrodes or heaters. 9 figs.

  2. Evaluating bacterial activity from cell-specific ribosomal RNA content measured with oligonucleotide probes

    SciTech Connect (OSTI)

    Kemp, P.F.; Lee, S.; LaRoche, J.

    1992-01-01T23:59:59.000Z

    We describe a procedure for measuring the cell-specific quantity of ribosomal RNA (rRNA) and DNA in order to evaluate the frequency distribution of activity among cells. The procedure is inherently quantitative, does not require sample incubation and potentially can be taxon-specific. Fluorescently-labelled oligonucleotide probes are hybridized to the complementary 16S rRNA sequences in preserved, intact cells. The resulting cell fluorescence is proportional to cellular rRNA content and can be measured with a microscope-mounted photometer system, by image analysis, or by flow cytometry. Similarly, DNA content is measured as fluorescence of cells stained with the DNA specific fluorochrome DAPI. These are either prepared as separate samples for purposes of enumeration and DNA measurements, or are dual-labelled cells which are also hybridized with oligonucleotide probes.

  3. Evaluating bacterial activity from cell-specific ribosomal RNA content measured with oligonucleotide probes

    SciTech Connect (OSTI)

    Kemp, P.F.; Lee, S.; LaRoche, J.

    1992-10-01T23:59:59.000Z

    We describe a procedure for measuring the cell-specific quantity of ribosomal RNA (rRNA) and DNA in order to evaluate the frequency distribution of activity among cells. The procedure is inherently quantitative, does not require sample incubation and potentially can be taxon-specific. Fluorescently-labelled oligonucleotide probes are hybridized to the complementary 16S rRNA sequences in preserved, intact cells. The resulting cell fluorescence is proportional to cellular rRNA content and can be measured with a microscope-mounted photometer system, by image analysis, or by flow cytometry. Similarly, DNA content is measured as fluorescence of cells stained with the DNA specific fluorochrome DAPI. These are either prepared as separate samples for purposes of enumeration and DNA measurements, or are dual-labelled cells which are also hybridized with oligonucleotide probes.

  4. Specific heat of twisted bilayer graphene: Engineering phonons by atomic plane rotations

    SciTech Connect (OSTI)

    Nika, Denis L. [E. Pokatilov Laboratory of Physics and Engineering of Nanomaterials, Department of Physics and Engineering, Moldova State University, Chisinau MD-2009, Republic of Moldova (Moldova, Republic of); Nano-Device Laboratory, Department of Electrical Engineering and Materials Science and Engineering Program, Bourns College of Engineering, University of California—Riverside, Riverside, California, 92521 (United States); Cocemasov, Alexandr I. [E. Pokatilov Laboratory of Physics and Engineering of Nanomaterials, Department of Physics and Engineering, Moldova State University, Chisinau MD-2009, Republic of Moldova (Moldova, Republic of); Balandin, Alexander A., E-mail: balandin@ee.ucr.edu [Nano-Device Laboratory, Department of Electrical Engineering and Materials Science and Engineering Program, Bourns College of Engineering, University of California—Riverside, Riverside, California, 92521 (United States)

    2014-07-21T23:59:59.000Z

    We have studied the phonon specific heat in single-layer, bilayer, and twisted bilayer graphene. The calculations were performed using the Born-von Karman model of lattice dynamics for intralayer atomic interactions and spherically symmetric interatomic potential for interlayer interactions. We found that at temperature T?specific heat varies with temperature as T{sup n}, where n?=?1 for graphene, n?=?1.6 for bilayer graphene, and n?=?1.3 for the twisted bilayer graphene. The phonon specific heat reveals an intriguing dependence on the twist angle in bilayer graphene, which is particularly pronounced at low temperature. The results suggest a possibility of phonon engineering of thermal properties of layered materials by twisting the atomic planes.

  5. Bifunctional chelating agent for the design and development of site specific radiopharmaceuticals and biomolecule conjugation strategy

    DOE Patents [OSTI]

    Katti, Kattesh V.; Prabhu, Kandikere R.; Gali, Hariprasad; Pillarsetty, Nagavara Kishore; Volkert, Wynn A.

    2003-10-21T23:59:59.000Z

    There is provided a method of labeling a biomolecule with a transition metal or radiometal in a site specific manner to produce a diagnostic or therapeutic pharmaceutical compound by synthesizing a P.sub.2 N.sub.2 -bifunctional chelating agent intermediate, complexing the intermediate with a radio metal or a transition metal, and covalently linking the resulting metal-complexed bifunctional chelating agent with a biomolecule in a site specific manner. Also provided is a method of synthesizing the --PR.sub.2 containing biomolecules by synthesizing a P.sub.2 N.sub.2 -bifunctional chelating agent intermediate, complexing the intermediate with a radiometal or a transition metal, and covalently linking the resulting radio metal-complexed bifunctional chelating agent with a biomolecule in a site specific manner. There is provided a therapeutic or diagnostic agent comprising a --PR.sub.2 containing biomolecule.

  6. Feasibility assessment of a risk-based approach to technical specifications

    SciTech Connect (OSTI)

    Atefi, B.; Gallagher, D.W. (Science Applications International Corp., McLean, VA (USA))

    1991-05-01T23:59:59.000Z

    The first phase of the assessment concentrates on (1) identification of selected risk-based approaches for improving current technical specifications, (2) appraisal of characteristics of each approach, including advantages and disadvantages, and (3) recommendation of one or more approaches that might result in improving current technical specification requirements. The second phase of the work concentrates on assessment of the feasibility of implementation of a pilot program to study detailed characteristics of the preferred approach. The real time risk-based approach was identified as the preferred approach to technical specifications for controlling plant operational risk. There do not appear to be any technical or institutional obstacles to prevent initiation of a pilot program to assess the characteristics and effectiveness of such an approach. 2 tabs.

  7. Using Built-In Domain-Specific Modeling Support to Guide Model-Based Test Generation

    E-Print Network [OSTI]

    Kanstrén, Teemu; 10.4204/EPTCS.80.5

    2012-01-01T23:59:59.000Z

    We present a model-based testing approach to support automated test generation with domain-specific concepts. This includes a language expert who is an expert at building test models and domain experts who are experts in the domain of the system under test. First, we provide a framework to support the language expert in building test models using a full (Java) programming language with the help of simple but powerful modeling elements of the framework. Second, based on the model built with this framework, the toolset automatically forms a domain-specific modeling language that can be used to further constrain and guide test generation from these models by a domain expert. This makes it possible to generate a large set of test cases covering the full model, chosen (constrained) parts of the model, or manually define specific test cases on top of the model while using concepts familiar to the domain experts.

  8. A computer program to determine the specific power of prismatic-core reactors

    SciTech Connect (OSTI)

    Dobranich, D.

    1987-05-01T23:59:59.000Z

    A computer program has been developed to determine the maximum specific power for prismatic-core reactors as a function of maximum allowable fuel temperature, core pressure drop, and coolant velocity. The prismatic-core reactors consist of hexagonally shaped fuel elements grouped together to form a cylindrically shaped core. A gas coolant flows axially through circular channels within the elements, and the fuel is dispersed within the solid element material either as a composite or in the form of coated pellets. Different coolant, fuel, coating, and element materials can be selected to represent different prismatic-core concepts. The computer program allows the user to divide the core into any arbitrary number of axial levels to account for different axial power shapes. An option in the program allows the automatic determination of the core height that results in the maximum specific power. The results of parametric specific power calculations using this program are presented for various reactor concepts.

  9. Specific heat and energy for the three-dimensional O(2) model

    E-Print Network [OSTI]

    Holtmann, S; Schulze, T

    2002-01-01T23:59:59.000Z

    We investigate the three-dimensional O(2) model on lattices of size 8^3 to 160^3 close to the critical point at zero magnetic field. We confirm explicitly the value of the critical coupling J_c found by Ballesteros et al. and estimate there the universal values of g_r and xi/L. At the critical point we study the finite size dependencies of the energy density epsilon and the specific heat C. We find that the nonsingular part of the specific heat C_{ns} is linearly dependent on 1/alpha. From the critical behaviour of the specific heat for T not T_c on the largest lattices we determine the universal amplitude ratio A+/A-. The alpha- dependence of this ratio is close to the phenomenological relation A+/A- = 1-4alpha.

  10. Patient-specific QA and delivery verification of scanned ion beam at NIRS-HIMAC

    SciTech Connect (OSTI)

    Furukawa, Takuji; Inaniwa, Taku; Hara, Yousuke; Mizushima, Kota; Shirai, Toshiyuki; Noda, Koji [Medical Physics Research Group, Research Center for Charged Particle Therapy, National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan)] [Medical Physics Research Group, Research Center for Charged Particle Therapy, National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan)

    2013-12-15T23:59:59.000Z

    Purpose: To evaluate a patient-specific QA program and system for constancy checking of a scanning delivery system developed at the National Institute of Radiological Sciences.Methods: For the patient-specific QA, all the planned beams are recalculated on a water phantom with treatment planning software (TPS). The recalculated dose distributions are compared with the measured distributions using a 2D ionization chamber array at several depths, and evaluated using gamma index analysis with criteria of 3% and 3 mm and a pass rate of 90%. For the constancy check, the authors developed the multiwire proportional chamber (MWPC), which can record the delivered 2D fluence images in a slice-by-slice manner. During irradiation for dosimetric QA with the 2D ionization chamber array and an accordion-type water phantom, the 2D fluence images are recorded using the MWPC in the delivery system. These recorded images are then compared to those taken in the treatment session to check the constancy check. This analysis also employs gamma index analysis using the same criteria as in the patient-specific QA. These patient-specific QA and constancy check evaluations were performed using the data of 122 patients.Results: In the patient-specific QA, the measured dose distributions agreed well with those calculated by the TPS, and the QA criteria were satisfied in all measurements. The additional check of the fluence comparison ensured the constancy of the delivered field during each treatment irradiation.Conclusions: The authors established a patient-specific QA program and additional check of delivery constancy in every treatment session. Fluence comparison is a strong tool for constancy checking of the delivery system.

  11. PRIDE Surveillance Projects Data Packaging Project, Information Package Specification Version 1.0

    SciTech Connect (OSTI)

    Kelleher, D.M.; Shipp, R. L.; Mason, J. D.

    2009-09-28T23:59:59.000Z

    This document contains a specification for a standard XML document format called an information package that can be used to store information and the context required to understand and use that information in information management systems and other types of information archives. An information package consists of packaged information, a set of information metadata that describes the packaged information, and an XML signature that protects the packaged information. The information package described in this specification was designed to be used to store Department of Energy (DOE) and National Nuclear Security Administration (NNSA) information and includes the metadata required for that information: a unique package identifier, information marking that conforms to DOE and NNSA requirements, and access control metadata. Information package metadata can also include information search terms, package history, and notes. Packaged information can be text content, binary content, and the contents of files and other containers. A single information package can contain multiple types of information. All content not in a text form compatible with XML must be in a text encoding such as base64. Package information is protected by a digital XML signature that can be used to determine whether the information has changed since it was signed and to identify the source of the information. This specification has been tested but has not been used to create production information packages. The authors expect that gaps and unclear requirements in this specification will be identified as this specification is used to create information packages and as information stored in information packages is used. The authors expect to issue revised versions of this specification as needed to address these issues.

  12. Broad specificity dioxygenase enzymes and the bioremediation of hazardous aromatic pollutants

    SciTech Connect (OSTI)

    Bonus, P.A.; Nies, L. [Purdue Univ., West Lafayette, IN (United States)

    1996-11-01T23:59:59.000Z

    The release of aromatic compounds to the environment is a major source of global pollution. In particular, the contamination of soil and groundwater with benzene, toluene, and xylenes (BTX) is the most ubiquitous form of aromatic pollution. The major source of BTX contamination is the release of gasoline and other petroleum products. This research focused on the improvement of bioremediation of BTX through a better understanding of broad specificity dioxygenase enzymes produced by soil and sediment bacteria. The investigation utilized pure bacterial strains isolated on biphenyl, naphthalene, or toluene. These isolated aerobic bacteria were then used to investigate the specificity of the initial enzymatic attack on aromatic compounds including BTX and polychlorinated biphenyls (PCBs). The enzymatic specificity and competency of the five isolates selected for study were determined through the use of growth tests and two rapid assay techniques. The growth tests were conducted on mineral agar plates or in liquid cultures, and they were used to determine substrate specificity. In addition, rapid assays for both BTX and PCBs were carried out using various growth substrates. These assays allowed further clarification of the specificity of the dioxygenase enzymes involved in aromatic degradation. Preliminary results of the PCB assay show that biphenyl and naphthalene isolated organisms grown on biphenyl, benzoate, naphthalene, and succinate maintain production of broad specificity dioxygenase enzymes able to degrade PCBs. Likewise, the BTX assay confirms that biphenyl and naphthalene selected organisms grown on their respective selection substrates completely degrade BTX including all three xylene isomers. In comparison, the toluene selected organism that was studied was unable to degrade PCBs, but it was able to degrade all BTX constituents.

  13. AUTHORIZING THE DOT SPECIFICATION 6M PACKAGING FOR CONTINUED USE AT THE SAVANNAH RIVER SITE

    SciTech Connect (OSTI)

    Watkins, R.; Loftin, B.; Hoang, D.

    2010-03-04T23:59:59.000Z

    The U.S. Department of Transportation (DOT) Specification 6M packaging was in extensive use for more than 40 years for in-commerce shipments of Type B quantities of fissile and radioactive material (RAM) across the USA, among the Department of Energy (DOE) laboratories, and between facilities in the DOE production complex. In January 2004, the DOT Research and Special Programs Administration (RSPA) Agency issued a final rule in the Federal Register to ammend requirements in the Hazardous Materials Regulations (HMR) pertaining to the transportation of radioactive materials. The final rule became effective on October 1, 2004. One of those changes discontinued the use of the DOT specification 6M, along with other DOT specification packagings, on October 1, 2008. A main driver for the change was due to the fact that 6M specification packagings were not supported by a Safety Analysis Report for Packagings (SARP) that was compliant with Title 10 of the Code of Federal Regulations (CFR) Part 71 (10 CFR 71). The regulatory rules for the discontinued use have been edited in Title 49 of the CFR Parts 100-185, 2004 edition and thereafter. Prior to October 1, 2008, the use of the 6M within the boundaries of the Savannah River Site (SRS), called an onsite transfer, was governed by an onsite transportation document that referenced 49 CFR Parts 100-185. SRS had to develop an Onsite Safety Assessment (OSA) which was independent of 49 CFR in order to justify the continued use of the DOT Specification 6M for the transfer of radioactive material (RAM) at the SRS after October 1, 2008. This paper will discuss the methodology for and difficulties associated with authorizing the DOT Specification 6M Packaging for continued use at the Savannah River Site.

  14. A Assertional verification using PVS Vitt & Hooman We present details of the PVS specification of the steam boiler control system.

    E-Print Network [OSTI]

    Hooman, Jozef

    of the steam boiler control system. In general, a PVS specification consists of a number of theories where each

  15. Environmental restoration and waste management Site-Specific Plan for the Oak Ridge Reservation. FY 1993

    SciTech Connect (OSTI)

    Not Available

    1993-01-15T23:59:59.000Z

    The United States Department of Energy (DOE) is committed to achieving and maintaining environmental regulatory compliance while responding to public concerns and emphasizing waste minimization. DOE publishes the Environmental Restoration and Waste Management Five-Year Plan (FYP) annually to document its progress towards these goals. The purpose of this Site-Specific Plan (SSP) is to describe the activities undertaken to implement the FYP goals at the DOE Oak Ridge Field Office (DOE/OR) installations and programs specifically for the Oak Ridge Reservation (ORR) and surrounding areas. This SSP addresses activities and goals to be accomplished during FY93 even through the FYP focuses on FY94.

  16. Specification of Selected Performance Monitoring and Commissioning Verification Algorithms for CHP Systems

    SciTech Connect (OSTI)

    Brambley, Michael R.; Katipamula, Srinivas

    2006-10-06T23:59:59.000Z

    Pacific Northwest National Laboratory (PNNL) is assisting the U.S. Department of Energy (DOE) Distributed Energy (DE) Program by developing advanced control algorithms that would lead to development of tools to enhance performance and reliability, and reduce emissions of distributed energy technologies, including combined heat and power technologies. This report documents phase 2 of the program, providing a detailed functional specification for algorithms for performance monitoring and commissioning verification, scheduled for development in FY 2006. The report identifies the systems for which algorithms will be developed, the specific functions of each algorithm, metrics which the algorithms will output, and inputs required by each algorithm.

  17. TECHNICAL BASIS FOR VENTILATION REQUIREMENTS IN TANK FARMS OPERATING SPECIFICATIONS DOCUMENTS

    SciTech Connect (OSTI)

    BERGLIN, E J

    2003-06-23T23:59:59.000Z

    This report provides the technical basis for high efficiency particulate air filter (HEPA) for Hanford tank farm ventilation systems (sometimes known as heating, ventilation and air conditioning [HVAC]) to support limits defined in Process Engineering Operating Specification Documents (OSDs). This technical basis included a review of older technical basis and provides clarifications, as necessary, to technical basis limit revisions or justification. This document provides an updated technical basis for tank farm ventilation systems related to Operation Specification Documents (OSDs) for double-shell tanks (DSTs), single-shell tanks (SSTs), double-contained receiver tanks (DCRTs), catch tanks, and various other miscellaneous facilities.

  18. Defining medium-specific condensates in QCD sum rules for $D$ and $B$ mesons

    E-Print Network [OSTI]

    T. Buchheim; T. Hilger; B. Kampfer

    2014-09-08T23:59:59.000Z

    QCD sum rules for $D$ and $B$ mesons in a strongly interacting environment require the decomposition of Gibbs averaged operators related to tensor structures. We present a procedure to decompose these operators into vacuum and medium-specific parts, thus defining plain medium-specific condensates with coefficients vanishing in vacuum. Our decomposition allows for an identification of potential elements of order parameters for chiral restoration, in particular for higher mass-dimension quark-condensates which would be masked otherwise if operators with uncontracted Lorentz indices would be linked to DIS amplitudes.

  19. University of Texas at Arlington Exhibit 2 Hazardous Communication Program C. EMPLOYEE SITE-SPECIFIC HAZARD COMMUNICATION TRAINING ("WORK AREA

    E-Print Network [OSTI]

    Texas at Arlington, University of

    -SPECIFIC HAZARD COMMUNICATION TRAINING ("WORK AREA SPECIFIC") Information specific to the employee's particular to be in the employee's work area(s): · the location of hazardous chemicals, · safe handling · warning signsUniversity of Texas at Arlington Exhibit 2 Hazardous Communication Program C. EMPLOYEE SITE

  20. Composite Model Checking: Verification with TypeSpecific Symbolic Representations \\Lambda

    E-Print Network [OSTI]

    League, Christopher

    of them is a requirements specification for the control software of a nuclear reactor's cooling system, there has been a surge of progress in automated verification methods based on state exploration. In areas on software systems. One limitation is their inability to deal with infinite­state programs -- even those