National Library of Energy BETA

Sample records for astm sp ecificatio

  1. Alternative Fuels Data Center: ASTM Biodiesel Specifications

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    ASTM Biodiesel Specifications to someone by E-mail Share Alternative Fuels Data Center: ASTM Biodiesel Specifications on Facebook Tweet about Alternative Fuels Data Center: ASTM Biodiesel Specifications on Twitter Bookmark Alternative Fuels Data Center: ASTM Biodiesel Specifications on Google Bookmark Alternative Fuels Data Center: ASTM Biodiesel Specifications on Delicious Rank Alternative Fuels Data Center: ASTM Biodiesel Specifications on Digg Find More places to share Alternative Fuels Data

  2. Biodiesel ASTM Update and Future Technical Needs

    Broader source: Energy.gov [DOE]

    Latest ASTM fuel specifications on biodiesel blends are summarized as well as future needs for improved fuel quality, process quality controls, and new performance testing procedures.

  3. ASTM PV INSTALLATON COMMISSIONING, OPERATIONS & MAINTENNCE (ICOMP...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ASTM PV INSTALLATON COMMISSIONING, OPERATIONS & MAINTENNCE (ICOMP) STANDARD PRACTICE ... which maps out the intent of the standard including incorporations of existing ...

  4. Biodiesel Progress: ASTM Specifications and 2nd Generation Biodiesel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Progress: ASTM Specifications and 2nd Generation Biodiesel Biodiesel Progress: ASTM Specifications and 2nd Generation Biodiesel Presentation given at the 2007 Diesel ...

  5. Ecological considerations for the use of chemical dispersants in oil spill response: Mangroves. (ASTM standard)

    SciTech Connect (OSTI)

    1986-03-01

    Copyright American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA, 19428, USA. This document is available from NTIS under license from ASTM.

  6. ASTM sampling methods and analytical validation for lead in paint, dust, soil, and air

    SciTech Connect (OSTI)

    Ashley, K.; Schlecht, P.C.; Song, R.; Feng, A.; DeWalt, G.; McKnight, M.E.

    1996-12-31

    ASTM Subcommittee E06.23 on Abatement/Mitigation of Lead Hazards has developed a number of standards that are concerned with the sampling of leas in environmental media, namely paint, dust, soil and airborne particulate. An ASTM practice for the collection of airborne particulate lead in the workplace has been published. New ASTM standards for the collection of dry paint film samples, surface soil samples, and surface dust wipe samples for subsequent lead analysis have also been promulgated. Other draft standards pertinent to lead sampling are under development. The ASTM standards concerned with lead sample collection are accompanied by separate sample preparation standard practices and a standard analysis method. Sample preparation and analytical methods have been evaluated by interlaboratory testing; such analyses may be used to assess the efficacy of sampling protocols.

  7. SP Newsprint

    SciTech Connect (OSTI)

    2009-11-01

    This is a combined heat and power (CHP) project profile on a 45 MW steam turbine at SP Newsprint in Dublin, Georgia.

  8. ASTM standard practice for testing fixed-wavelength photometric detectors used in liquid chromatography

    SciTech Connect (OSTI)

    Wolf, T.; Fritz, G.T.; Palmer, L.R.

    1981-08-01

    A standard testing procedure has been devised for fixed-wavelength photometric detectors (FWPD) used in liquid chromatography. The need for this procedure, the objectives for developing it, and the means for accomplishing the objectives are outlined. Salient details of the procedure are discussed including the determination of nine characteristics of FWPDs. After an evaluation by ten laboratories, the revised procedure was balloted and revised again according to ASTM procedures (1). The final revised version is now available from ASTM as Standard Practice E 685 (2).

  9. Development of an ASTM standard guide on performing vulnerability assessments for nuclear facilities

    SciTech Connect (OSTI)

    Wilkey, D.D.

    1995-09-01

    This paper describes an effort undertaken by subcommittee C26.12 (Safeguards) of the American Society for Testing and Materials (ASTM) to develop a standard guide for performing vulnerability assessments (VAs). VAs are performed to determine the effectiveness of safeguards and security systems for both domestic and international nuclear facilities. These assessments address a range of threats, including theft of nuclear material and sabotage, and use an array of methods. The approach to performing and documenting VAs is varied and is largely dependent upon the tools used to perform them. This diversity can lead to tools being misused, making validation of VAs more difficult. The development of a standard guide for performing VAs would, if generally accepted, alleviate these concerns. ASTM provides a forum for developing guides that includes a high level of peer review to assure that the result is acceptable to all potential users. Additionally, the ASTM is widely recognized for setting standards, and endorsement by the Society may increase the likelihood of acceptance by the nuclear community. The goal of this work is to develop a guide that is independent of the tools being used to perform the VA and applicable to the spectrum of threats described above.

  10. Impact of ASTM Standard E722 update on radiation damage metrics.

    SciTech Connect (OSTI)

    DePriest, Kendall Russell

    2014-06-01

    The impact of recent changes to the ASTM Standard E722 is investigated. The methodological changes in the production of the displacement kerma factors for silicon has significant impact for some energy regions of the 1-MeV(Si) equivalent fluence response function. When evaluating the integral over all neutrons energies in various spectra important to the SNL electronics testing community, the change in the response results in an increase in the total 1-MeV(Si) equivalent fluence of 2 7%. Response functions have been produced and are available for users of both the NuGET and MCNP codes.

  11. White Paper Summary of 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding

    SciTech Connect (OSTI)

    Sindelar, R.; Louthan, M.; PNNL, B.

    2015-05-29

    This white paper recommends that ASTM International develop standards to address the potential impact of hydrides on the long term performance of irradiated zirconium alloys. The need for such standards was apparent during the 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding and Assembly Components, sponsored by ASTM International Committee C26.13 and held on June 10-12, 2014, in Jackson, Wyoming. The potentially adverse impacts of hydrogen and hydrides on the long term performance of irradiated zirconium-alloy cladding on used fuel were shown to depend on multiple factors such as alloy chemistry and processing, irradiation and post irradiation history, residual and applied stresses and stress states, and the service environment. These factors determine the hydrogen content and hydride morphology in the alloy, which, in turn, influence the response of the alloy to the thermo-mechanical conditions imposed (and anticipated) during storage, transport and disposal of used nuclear fuel. Workshop presentations and discussions showed that although hydrogen/hydride induced degradation of zirconium alloys may be of concern, the potential for occurrence and the extent of anticipated degradation vary throughout the nuclear industry because of the variations in hydrogen content, hydride morphology, alloy chemistry and irradiation conditions. The tools and techniques used to characterize hydrides and hydride morphologies and their impacts on material performance also vary. Such variations make site-to-site comparisons of test results and observations difficult. There is no consensus that a single material or system characteristic (e.g., reactor type, burnup, hydrogen content, end-of life stress, alloy type, drying temperature, etc.) is an effective predictor of material response during long term storage or of performance after long term storage. Multi-variable correlations made for one alloy may not represent the behavior of another alloy exposed to

  12. Dynamic Fracture Initiation Toughness of ASTM A533, Grade B Steel Plate

    SciTech Connect (OSTI)

    Graham, S.M.; Link, R.E.

    1999-05-01

    The dynamic fracture toughness of an ASTM A533, Grade B steel plate was determined at several temperatures in the ductile-brittle transition region. Crack-tip loading rates ranged from approximately 10(sup3) to 10(sup5) MPa m/s. The fracture toughness was shown to decrease with increased loading rate. The dynamic fracture toughness was compared with results from previous investigations, and it was shown that the decrease in toughness due to increased loading rate at the highest test temperature was not as severe as reported in previous investigations. It was also shown that the reference temperature. T(sub0) was better index of the fracture toughness vs. temperature relationship than the nil-ductility temperature, RT(subNDT), for this material.

  13. The chemistry modifications to ASTM A707 for offshore structural integrity

    SciTech Connect (OSTI)

    Walsh, M.A.; Price, S.

    1997-12-31

    The development of low alloy steels for offshore applications has generally led to the selection of increasingly leaner chemistries which are tailored to meet specific design requirements. Low carbon, low alloy, copper bearing steels based on the ASTM A707 grade system have attractive considerable interest for applications combining high strength and toughness with good weldability. Forgemasters Steel and Engineering has been intimately involved in the development of A707 variants which has led to contracts for the production of forged components for the Auger and Mars platforms. A thorough review of structure property relationships with regard to the role of copper precipitation during aging, has been undertaken. Comparisons have been drawn with conventional low carbon, low alloy steels where similar properties are achieved with tempered bainitic microstructures.

  14. Characterization of Multilayered Multipass Friction Stir Weld on ASTM A572 G50 Steel

    SciTech Connect (OSTI)

    Lim, Yong Chae; Sanderson, Samuel; Mahoney, Murray; Yu, Xinghua; Qiao, Dongxiao; Wang, Yanli; Zhang, Wei; Feng, Zhili

    2014-01-01

    A multilayered multipass friction stir weld (MM-FSW) on ASTM A572 Grade 50 steel was characterized to understand its potential application for thick-section structures. The 15-mm-thick section was fabricated by stacking up three steel plates and then friction stir welding the plates together in a total of 5 passes. The unique butt/lap joint configuration encountered in the multilayer weld was examined to understand the effect of tool rotation direction on the joint quality especially the formation of hooking defect. Charpy V-notch impact toughness tests showed generally higher impact toughness energy for the stir zone than the base metal with a ductile fracture mode. The microhardness value was measured from 195 to 220 HV in the stir zone, while the base metal showed an average value of 170 HV. The microstructure in the stir zone and the adjacent heat affected zone was quantified using Optical and Scanning Electron Microscopy (SEM) including Electron Backscatter Diffraction (EBSD). The increased toughness and hardness were correlated with the refined microstructure in stir zone, resulting from severe plastic deformation and subsequent dynamic recrystallization during friction stir welding.

  15. Characterization of Multilayered Multipass Friction Stir Weld on ASTM A572 G50 Steel

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lim, Yong Chae; Sanderson, Samuel; Mahoney, Murray; Yu, Xinghua; Qiao, Dongxiao; Wang, Yanli; Zhang, Wei; Feng, Zhili

    2014-01-01

    A multilayered multipass friction stir weld (MM-FSW) on ASTM A572 Grade 50 steel was characterized to understand its potential application for thick-section structures. The 15-mm-thick section was fabricated by stacking up three steel plates and then friction stir welding the plates together in a total of 5 passes. The unique butt/lap joint configuration encountered in the multilayer weld was examined to understand the effect of tool rotation direction on the joint quality especially the formation of hooking defect. Charpy V-notch impact toughness tests showed generally higher impact toughness energy for the stir zone than the base metal with a ductilemore » fracture mode. The microhardness value was measured from 195 to 220 HV in the stir zone, while the base metal showed an average value of 170 HV. The microstructure in the stir zone and the adjacent heat affected zone was quantified using Optical and Scanning Electron Microscopy (SEM) including Electron Backscatter Diffraction (EBSD). The increased toughness and hardness were correlated with the refined microstructure in stir zone, resulting from severe plastic deformation and subsequent dynamic recrystallization during friction stir welding.« less

  16. Selecting surface geophysical methods for geological, hydrological, geotechnical, and environmental investigation: The rationale for the ASTM provisional guide

    SciTech Connect (OSTI)

    Saunders, W.; Benson, R.; Snelgrove, F.; Soloyanis, S.

    1999-07-01

    The ASTM Provisional Guide (PS 78-97) for Selecting Surface Geophysical Methods was developed as a guide for project managers, contractors, geologists, and geophysicists to assist in selecting the most likely geophysical method or methods to conduct specific subsurface investigations. Numerous surface geophysical methods and techniques exist that can be used to determine subsurface soil and rock properties and their distribution. These same methods are also widely used to investigate and locate manmade structures such as buried objective and landfills. This paper discusses the general uses of surface geophysics and the use of the provisional guide. This paper is not intended to be used as he guide. The ASTM Provisional Guide provides direction in selecting the most appropriate geophysical method or methods for a specific application under general site conditions. Secondary methods are also proposed that, under certain circumstances, should be evaluated before a final selection is made. Some typical conditions under which a primary or secondary method might or might not provide satisfactory results are given in the provisional guide. references for further information about selected methods and to method-specific ASTM guides are also provided. Secondary methods usually have less than desired performance, higher cost, or greater labor requirements as compared to the primary methods.

  17. ARM - Instrument - sp2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govInstrumentssp2 Documentation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Single Particle Soot Photometer (SP2) Instrument Categories Aerosols The SP2 measures the soot (black carbon) mass of individual aerosol particles by laser-induced incandescence down to concentrations as low as 10 ng/m^3. The SP2 is part of the Aerosol Observing System (AOS). Output Datastreams sp2 : Single Particle Soot

  18. Optimizing surface quality of stainless alloys and using a modified ASTM G 48B procedure for acceptance testing

    SciTech Connect (OSTI)

    Maurer, J.R.

    1999-01-01

    The formation of high-temperature oxide scales and Cr-depleted zones on stainless alloys, such as 6% Mo superaustenitic steels, can significantly reduce their corrosion resistance. Effective methods to remove these layers and restore the surface to an optimized condition are detailed. Also, an acceptance test using a modified ASTM G 48B method at 35 C (95 F) for 72 h with a specimen having a crevice, and special corrosion criteria for failure, are described. Comparison of this test method with one using an uncreviced specimen at lower temperatures and for less time is discussed.

  19. Extensible Argonne SP Scheduling System

    Energy Science and Technology Software Center (OSTI)

    1996-01-24

    The Argonne SP Scheduler provides deterministic queuing of jobs for exclusive access to the SP nodes for either batch or interactive use.

  20. Development of ASTM Standard for SiC-SiC Joint Testing Final Scientific/Technical Report

    SciTech Connect (OSTI)

    Jacobsen, George; Back, Christina

    2015-10-30

    As the nuclear industry moves to advanced ceramic based materials for cladding and core structural materials for a variety of advanced reactors, new standards and test methods are required for material development and licensing purposes. For example, General Atomics (GA) is actively developing silicon carbide (SiC) based composite cladding (SiC-SiC) for its Energy Multiplier Module (EM2), a high efficiency gas cooled fast reactor. Through DOE funding via the advanced reactor concept program, GA developed a new test method for the nominal joint strength of an endplug sealed to advanced ceramic tubes, Fig. 1-1, at ambient and elevated temperatures called the endplug pushout (EPPO) test. This test utilizes widely available universal mechanical testers coupled with clam shell heaters, and specimen size is relatively small, making it a viable post irradiation test method. The culmination of this effort was a draft of an ASTM test standard that will be submitted for approval to the ASTM C28 ceramic committee. Once the standard has been vetted by the ceramics test community, an industry wide standard methodology to test joined tubular ceramic components will be available for the entire nuclear materials community.

  1. A description of the new ASTM test method E 1424, used for measuring fenestration air leakage at differential temperatures and pressures

    SciTech Connect (OSTI)

    Kehrli, D.W.

    1995-09-01

    A new committee has been developed by ASTM Committee E6 for measuring air leakage rates of fenestration products under imposed conditions of differential pressures and temperatures. This new method is different from the long-standing, internationally referenced ASTM Method E 283 in that it is performed under temperature differentials across the test specimen similar to ASTM C 236 and C 1199, and AAMA 1503-88. This new method will show the impacts of expansion and contraction, shrinkage, compression-set, fabrication and design integrity, and material and component interactions in the air leakage rates of window and doors products. This paper compares the two methods and provides some typical test data.

  2. Porterfield named ASTM Fellow

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Nuclear Fuel Cycle International Committee may bestow on an individual; and the Max Hecht Award, the highest award the Water International Committee can bestow on an - 2 -...

  3. Porterfield named ASTM Fellow

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Nuclear Fuel Cycle International Committee may bestow on an individual; and the Max Hecht Award, the highest award the Water International Committee can bestow on an...

  4. Enel Green Power SpA formerly Erga SpA | Open Energy Information

    Open Energy Info (EERE)

    SpA formerly Erga SpA Jump to: navigation, search Name: Enel Green Power SpA (formerly Erga SpA) Place: Pisa, Italy Zip: 56122 Sector: Geothermal energy, Hydro, Renewable Energy,...

  5. Solarcell SpA | Open Energy Information

    Open Energy Info (EERE)

    SpA Jump to: navigation, search Name: Solarcell SpA Place: Brugherio, Italy Product: Italian manufacturer of PV cells. References: Solarcell SpA1 This article is a stub. You...

  6. Cyanobacterium sp. for production of compounds

    DOE Patents [OSTI]

    Piven, Irina; Friedrich, Alexandra; Duhring, Ulf; Uliczka, Frank; Baier, Kerstin; Inaba, Masami; Shi, Tuo; Wang, Kui; Enke, Heike; Kramer, Dan

    2015-10-13

    A genetically enhanced cyanobacterial host cell, Cyanobacterium sp. ABICyano1, is disclosed. The enhanced Cyanobacterium sp. ABICyano1 produces a compound or compounds of interest.

  7. Innova SpA | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Innova SpA Place: Italy Sector: Services Product: General Financial & Legal Services ( Private family-controlled ) References: Innova SpA1 This...

  8. ARM - Campaign Instrument - sp2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Single Particle Soot Photometer (SP2) Instrument Categories Aerosols...

  9. Argonne's SpEC Module

    ScienceCinema (OSTI)

    Harper, Jason

    2014-06-05

    Jason Harper, an electrical engineer in Argonne National Laboratory's EV-Smart Grid Interoperability Center, discusses his SpEC Module invention that will enable fast charging of electric vehicles in under 15 minutes. The module has been licensed to BTCPower.

  10. Argonne's SpEC Module

    SciTech Connect (OSTI)

    Harper, Jason

    2014-05-05

    Jason Harper, an electrical engineer in Argonne National Laboratory's EV-Smart Grid Interoperability Center, discusses his SpEC Module invention that will enable fast charging of electric vehicles in under 15 minutes. The module has been licensed to BTCPower.

  11. Fortesa SpA | Open Energy Information

    Open Energy Info (EERE)

    Fortesa SpA Place: Italy Sector: Solar Product: Italy-based developer of PV solar plants. References: Fortesa SpA1 This article is a stub. You can help OpenEI by expanding...

  12. Metalco SpA | Open Energy Information

    Open Energy Info (EERE)

    Metalco SpA Jump to: navigation, search Name: Metalco SpA Place: Italy Product: Italy-based active metal construction company offering solutions for PV applications. References:...

  13. Almeco SpA | Open Energy Information

    Open Energy Info (EERE)

    Almeco SpA Jump to: navigation, search Name: Almeco SpA Place: Milan, Italy Zip: 20098 Product: Milan-based lighting company. Manufactures daylight saving systems and light pipes...

  14. Enia SpA | Open Energy Information

    Open Energy Info (EERE)

    SpA Jump to: navigation, search Name: Enia SpA Place: Parma, Italy Zip: 43100 Product: Italian utility company. Coordinates: 44.79864, 10.339925 Show Map Loading map......

  15. Argonne's SpEC Module | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SpEC Module Share Topic Energy Energy efficiency Vehicles

  16. Enel SpA | Open Energy Information

    Open Energy Info (EERE)

    Enel SpA Place: Roma, Italy Zip: 198 Sector: Renewable Energy Product: Rome-based electricity distributor and generator, also supplies gas and is active in telecommunications....

  17. SP Energy Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Energy Co Ltd Jump to: navigation, search Name: SP Energy Co Ltd Place: Moongyeong, North Gyeongsang, Korea (Republic) Product: Korea-based project developer involved with building...

  18. SunTergrid SpA | Open Energy Information

    Open Energy Info (EERE)

    SunTergrid SpA Jump to: navigation, search Name: SunTergrid SpA Place: Roma, Italy Sector: Solar Product: Italy-based solar project developer and subsidiary of Terna SpA....

  19. Solar Utility SpA | Open Energy Information

    Open Energy Info (EERE)

    Utility SpA Jump to: navigation, search Name: Solar Utility SpA Place: Italy Sector: Solar Product: Italy-based solar PV project developer. References: Solar Utility SpA1 This...

  20. Enel Produzione SpA | Open Energy Information

    Open Energy Info (EERE)

    Produzione SpA Jump to: navigation, search Name: Enel Produzione SpA Place: Roma, Italy Zip: 198 Sector: Biomass, Geothermal energy, Hydro, Services, Wind energy Product:...

  1. EASY-DOS. Extensible Argonne SP Scheduling sYstem

    SciTech Connect (OSTI)

    Lifka, D.; Henderson, M.; Rayl, K.

    1995-05-01

    The Argonne SP Scheduler provides deterministic queuing of jobs for exclusive access to the SP nodes for either batch or interactive use.

  2. EASY-MAC. Extensible Argonne SP Scheduling sYstem

    SciTech Connect (OSTI)

    Lifka, D.; Henderson, M.; Rayl, K.

    1995-05-01

    The Argonne SP Scheduler provides deterministic queuing of jobs for exclusive access to the SP nodes for either batch or interactive use.

  3. SP-100, the US Space Nuclear Reactor Power Program. Technical...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: SP-100, the US Space Nuclear Reactor Power Program. Technical information report Citation Details In-Document Search Title: SP-100, the US Space Nuclear Reactor ...

  4. Compagnia Italiana Energia SpA CIE | Open Energy Information

    Open Energy Info (EERE)

    Compagnia Italiana Energia SpA CIE Jump to: navigation, search Name: Compagnia Italiana Energia SpA (CIE) Place: Torino, Italy Zip: 10143 Sector: Renewable Energy Product:...

  5. Launch vehicle integration requirements for SP-100

    SciTech Connect (OSTI)

    Shaw, L.T. Jr.; Womack, J.R.

    1984-01-31

    SP-100 is the designation for a nuclear reactor-based power plant being developed for both civil and military missions beginning in the 1990s for such potential space applications as communication satellites, space radar, electric propulsion and space stations. Typically, a system using the SP-100 along with a selected upper stage system would be launched by the National Space Transportation System (NSTS) Space Shuttle System into a near-earth orbit, deployed, and through upper stage propulsion burn(s) be inserted/transferred to its mission orbit. The nature of the advanced design SP-100 gives rise to a set of issues that require special attention to assure that payloads using this power plant are physically and functionally compatible with the NSTS and meet the safety requirements thereof. The purpose of this document is to define and present the requirements and interface provisions that, when satisfied, will ensure technical compability between SP-100 systems and the NSTS.

  6. Edison SpA | Open Energy Information

    Open Energy Info (EERE)

    SpA Place: Milan, Italy Zip: 20121 Sector: Hydro, Wind energy Product: Independent power producer with approximately 9,300MW of hydro, fossil fuel and wind generation assets....

  7. ARM - Campaign Instrument - sp2-air

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    -air Comments? We would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Single Particle Soot Photometer - Airborne (SP2-AIR)...

  8. Pramac SpA | Open Energy Information

    Open Energy Info (EERE)

    Italy Zip: 53031 Product: Pramac is predominately a manufacturer of handling systems and power systems, entered the PV industry in December 2007. References: Pramac SpA1 This...

  9. HERA SpA | Open Energy Information

    Open Energy Info (EERE)

    HERA SpA Place: Bologna, Italy Zip: 40127 Sector: Services Product: Hera is a large Italian multiple-service group, born as the result of the first significant aggregation of...

  10. TerniEnergia SpA | Open Energy Information

    Open Energy Info (EERE)

    TerniEnergia SpA Jump to: navigation, search Name: TerniEnergia SpA Place: Terni, Italy Zip: 5100 Sector: Renewable Energy Product: Italy-based developer of renewable energy...

  11. Fintel Energy Group SpA | Open Energy Information

    Open Energy Info (EERE)

    Fintel Energy Group SpA Jump to: navigation, search Name: Fintel Energy Group SpA Place: Pollenza, Italy Zip: 62010 Sector: Renewable Energy Product: Italy-based energy operator...

  12. Microsoft Word - FY 2015 SP Performance Appraisal System Guidance - Final

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Executive Resources Office of the Chief Human Capital Officer U.S. Department of Energy FY 2015 Senior Professional (SP) Performance Appraisal System Opening Guidance 2 Table of Contents Contents I. SP PERFORMANCE APPRAISAL TEMPLATE and TIMELINE ....................................................................... 3 II. PERFORMANCE PLAN - CRITICAL ELEMENTS .......................................................................................... 3 III. SP SUMMARY RATING LEVEL

  13. ARM - Campaign Instrument - sp-ams

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govInstrumentssp-ams Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Soot particle aerosol mass spectrometer (SP-AMS) Instrument Categories Aerosols Primary Measurements Taken The following measurements are those considered scientifically relevant. Refer to the datastream (netcdf) file headers for the list of all available measurements, including those recorded for diagnostic or quality assurance purposes. Inorganic chemical

  14. FY 2015 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL (SP)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PERFORMANCE APPRAISAL CYCLE - CLOSEOUT GUIDANCE | Department of Energy 5 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL (SP) PERFORMANCE APPRAISAL CYCLE - CLOSEOUT GUIDANCE FY 2015 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL (SP) PERFORMANCE APPRAISAL CYCLE - CLOSEOUT GUIDANCE The FY 2015 performance appraisal cycle for both SES and SP members, which includes Senior Level (SL) and Scientific or Professional (ST) employees, concluded on September 30, 2015. In order to

  15. FY 2016 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL (SP)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PERFORMANCE APPRAISAL OPENING GUIDANCE | Department of Energy 6 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL (SP) PERFORMANCE APPRAISAL OPENING GUIDANCE FY 2016 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL (SP) PERFORMANCE APPRAISAL OPENING GUIDANCE FY 2016 performance appraisal cycle for both SES and SP members, which includes Senior Level (SL) and Scientific or Professional (ST) employees, concludes on December 15, 2015. These documents provide a detailed overview of

  16. Mineralization of a Malaysian crude oil by Pseudomonas sp. and Achromabacter sp. isolated from coastal waters

    SciTech Connect (OSTI)

    Ahmad, J.; Ahmad, M.F.

    1995-12-31

    Regarded as being a potentially effective tool to combat oil pollution, bioremediation involves mineralization, i.e., the conversion of complex hydrocarbons into harmless CO{sub 2} and water by action of microorganisms. Therefore, in achieving optimum effectiveness from the application of these products on crude oil in local environments, the capability of the bacteria to mineralize hydrocarbons was evaluated. The microbial laboratory testing of mineralization on local oil degraders involved, first, isolation of bacteria found at a port located on the west coast of Peninsular Malaysia. Subsequently, these bacteria were identified by means of Biomereux`s API 20E and 20 NE systems and later screened by their growth on a Malaysian crude oil. Selected strains of Pseudomonas sp. and Achromabacter sp. were then exposed individually to a similar crude oil in a mineralization unit and monitored for 16 days for release of CO{sub 2}. Pseudomonas paucimobilis was found to produce more CO{sub 2} than Achromobacter sp. When tested under similar conditions, mixed populations of these two taxa produced more CO{sub 2} than that produced by any individual strain. Effective bioremediation of local crude in Malaysian waters can therefore be achieved from biochemically developed Pseudomonas sp. strains.

  17. Preliminary SP-100/Stirling heat exchanger designs

    SciTech Connect (OSTI)

    Schmitz, P.; Tower, L.; Dawson, R.; Blue, B.; Dunn, P.

    1994-09-01

    Analytic modeling of several heat exchanger concepts to couple the SP-100 nuclear reactor lithium loop and the Space Stirling Power Convertor (SSPC) was performed. Four 25 kWe SSPC`s are used to produce the required 100 kW of electrical power. This design work focused on the interface between a single SSPC and the primary lithium loop. Manifolding to separate and collect the four channel flow was not modeled. This work modeled two separate types of heat exchanger interfaces (conductive coupling and radiative coupling) to explore their relative advantages and disadvantages. The minimum mass design of the conductively coupled concepts was 18 kg or 0.73 kg/kWe for a single 25 kWe convertor. The minimum mass radiatively coupled concept was 41 kg or 1.64 kg/kWe. The direct conduction heat exchanger provides a lighter weight system because of its ability to operate the Stirling convertor evaporator at higher heat fluxes than those attainable by the radiatively coupled systems. Additionally the conductively coupled concepts had relatively small volumes and provide potentially simpler assembly. Their disadvantages were the tight tolerances and material joining problems associated with this refractory to superalloy interface. The advantages of the radiatively coupled designs were the minimal material interface problems.

  18. PaSol Italia SpA | Open Energy Information

    Open Energy Info (EERE)

    Name: PaSol Italia SpA Place: Varallo Pombia, Italy Zip: 28040 Sector: Solar Product: PA.SOL was formed by local private investors in order to initiate local PV module...

  19. Launch vehicle integration requirements for SP-100. Technical information report

    SciTech Connect (OSTI)

    Shaw, L.T. Jr.; Womack, J.R.

    1984-03-01

    SP-100 is the designation for a nuclear reactor-based power plant being developed for both civil and military missions beginning in the 1990s for such potential space applications as communication satellites, space radar, electric propulsion and space stations. Typically, a system using the SP-100 along with a selected upper stage system would be launched by the National Space Transportation System (NSTS) Space Shuttle System into a near-earth orbit, deployed, and through upper stage propulsion burn(s) be inserted/transferred to its mission orbit. The nature of the advanced design SP-100 payloads using this power plant are physically and functionally compatible with the NSTS and meet the safety requirements thereof. The purpose of this document is to define and present the requirements and interface provisions that, when satisfied, will ensure technical compatibility between SP-100 systems and the NSTS.

  20. MX Group SpA | Open Energy Information

    Open Energy Info (EERE)

    SpA Place: Villasanta, Italy Zip: 20058 Product: MX group is a turnkey provider of manufacturing plants for PV and other electronic equipment. Coordinates: 45.606895, 9.3066...

  1. Shewanella loihica sp. nov., isolated from iron-rich microbial...

    Office of Scientific and Technical Information (OSTI)

    loihica sp. nov., isolated from iron-rich microbial mats in the Pacific Ocean A novel marine bacterial strain, PV-4T, isolated from a microbial mat located at a hydrothermal vent...

  2. Three-dimensional carbon allotropes comprising phenyl rings and acetylenic chains in sp+sp2 hybrid networks

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wang, Jian -Tao; Chen, Changfeng; Li, Han -Dong; Mizuseki, Hiroshi; Kawazoe, Yoshiyuki

    2016-04-18

    Here, we here identify by ab initio calculations a new type of three-dimensional (3D) carbon allotropes that consist of phenyl rings connected by linear acetylenic chains in sp+sp2 bonding networks. These structures are constructed by inserting acetylenic or diacetylenic bonds into an all sp2-hybridized rhombohedral polybenzene lattice, and the resulting 3D phenylacetylene and phenyldiacetylene nets comprise a 12-atom and 18-atom rhombohedral primitive unit cells R-3m symmetry, which are characterized as the 3D chiral crystalline modification of 2D graphyne and graphdiyne, respectively. Simulated phonon spectra reveal that these structures are dynamically stable. Electronic band calculations indicate that phenylacetylene is metallic, whilemore » phenyldiacetylene is a semiconductor with an indirect band gap of 0.58 eV. The present results establish a new type of carbon phases and offer insights into their outstanding structural and electronic properties.« less

  3. ErgyCapital SpA formerly Greenergy Capital | Open Energy Information

    Open Energy Info (EERE)

    SpA formerly Greenergy Capital Jump to: navigation, search Name: ErgyCapital SpA (formerly Greenergy Capital) Place: Milan, Italy Zip: 20121 Sector: Efficiency, Renewable Energy...

  4. NSS5/SP-STM2 Joint International Conference

    SciTech Connect (OSTI)

    Saw-Wai Hla

    2009-05-03

    The NSS5/SP-STM2 conference was held in Athens, Ohio July 15-19, 2008. The conference brought together a prestigious group of scientists from all over the globe to focus for 3 days on a variety of nanoscience topics, particularly on nanoscale spectroscopy and spin-polarized scanning tunneling microscopy. The conference was attended by many young scientists as well as senior scientists. Attendees to the conference were drawn from more than 10 countries and included 28 invited speakers, who are the leading scientists in their respective research areas. Included among the invited speakers were 4 plenary speakers - eminent scientists in their fields. The conference was divided into two parallel sessions the NSS5 session and the SP-STM2 session.

  5. The transputer based GA. SP data acquisition system

    SciTech Connect (OSTI)

    Colombo, D.; Avano, B.; DePoli, M.; Maron, G. ); Negro, A.; Parlati, G. )

    1992-04-01

    In this paper, the new data acquisition for the GA.SP detector is presented. It is a distributed system based on a network of 40 T800 and T222 transputers linked to a VME system used for histogram storage. A 100 MBit/s FDDI ring connects the system to UNIX workstations used for the experiment control, histogram display and second level data analysis.

  6. Multiplexer/amplifier test results for SP-100

    SciTech Connect (OSTI)

    King, D.B.; Luker, S.M. ); Ryan, R. )

    1990-01-01

    Multiplexer and amplifier systems must be designed with transistors that can perform satisfactorily over ten years to a total gamma dose of 120E6 rads and a total neutron fluence of 1.6E15 nvt for the SP-100 reactor system. Series of gamma and neutron tests have been completed to measure transistor degradation as a function of total dose, fluence, and temperature. Test results indicate that modest increases in temperature result in substantial improvement of transistor performance at a neutron flux of 8E8 n/cm{sup 2}/s. 2 refs., 3 figs.

  7. Spectral SP: A New Approach to Mapping Reservoir Flow and Permeability |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Spectral SP: A New Approach to Mapping Reservoir Flow and Permeability Spectral SP: A New Approach to Mapping Reservoir Flow and Permeability Spectral SP: A New Approach to Mapping Reservoir Flow and Permeability presentation at the April 2013 peer review meeting held in Denver, Colorado. hawaii_geophysics_planetology_peer2013.pdf (439.06 KB) More Documents & Publications Blind Geothermal System Exploration in Active Volcanic Environments; Multi-phase Geophysical and

  8. DOE ARM SP2 Deployment at Boston College_Aerodyne led Coated...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... The population mixing states were measured using the SP2 and ScanningTransmission ... reactor (providing controlled oxidative aging of such particles via OH and O 3 reactions ...

  9. Spectral SP: A New Approach to Mapping Reservoir Flow and Permeability...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Spectral SP: A New Approach to Mapping Reservoir Flow and Permeability presentation at the April 2013 peer review meeting held in Denver, Colorado. PDF icon hawaiigeophysicsplane...

  10. FY 2015 Senior Executive Service (SES) and Senior Professional (SP) Performance Appraisal Opening Guidance

    Broader source: Energy.gov [DOE]

    The FY 2015 performance appraisal cycle for both SES and SP members, which includes Senior Level (SL) and Scientific or Professional (ST) employees, concludes on September 30, 2015.

  11. High-quality permanent draft genome sequence of Bradyrhizobium sp. strain WSM1743 - an effective microsymbiont of an Indigofera sp. growing in Australia

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Eshraghi, Leila; De Meyer, Sofie E.; Tian, Rui; Seshadri, Rekha; Ivanova, Natalia; Pati, Amrita; Markowitz, Victor; Woyke, Tanja; Kyrpides, Nikos C.; Tiwari, Ravi; et al

    2015-10-26

    Bradyrhizobium sp. strain WSM1743 is an aerobic, motile, Gram-negative, non-spore-forming rod that can exist as a soil saprophyte or as a legume microsymbiont of an Indigofera sp. WSM1743 was isolated from a nodule recovered from the roots of an Indigofera sp. growing 20 km north of Carnarvon in Australia. It is slow growing, tolerates up to 1 % NaCl and is capable of growth at 37 °C. Here we describe the features of Bradyrhizobium sp. strain WSM1743, together with genome sequence information and its annotation. Finally, the 8,341,956 bp high-quality permanent draft genome is arranged into 163 scaffolds and 167more » contigs, contains 7908 protein-coding genes and 75 RNA-only encoding genes and was sequenced as part of the Root Nodule Bacteria chapter of the Genomic Encyclopedia of Bacteria and Archaea project.« less

  12. Complete genome sequence of Arthrobacter sp. strain FB24

    SciTech Connect (OSTI)

    Nakatsu, C. H.; Barabote, Ravi; Thompson, Sue; Bruce, David; Detter, Chris; Brettin, T.; Han, Cliff F.; Beasley, Federico; Chen, Weimin; Konopka, Allan; Xie, Gary

    2013-09-30

    Arthrobacter sp. strain FB24 is a species in the genus Arthrobacter Conn and Dimmick 1947, in the family Micrococcaceae and class Actinobacteria. A number of Arthrobacter genome sequences have been completed because of their important role in soil, especially bioremediation. This isolate is of special interest because it is tolerant to multiple metals and it is extremely resistant to elevated concentrations of chromate. The genome consists of a 4,698,945 bp circular chromosome and three plasmids (96,488, 115,507, and 159,536 bp, a total of 5,070,478 bp), coding 4,536 proteins of which 1,257 are without known function. This genome was sequenced as part of the DOE Joint Genome Institute Program.

  13. PAH bioconcentration in Mytilus sp from Sinclair Inlet, WA

    SciTech Connect (OSTI)

    Frazier, J.; Young, D.; Ozretich, R.; Echols, S.

    1995-12-31

    Approximately 20 polynuclear aromatic hydrocarbons (PAH) were measured by GC/MS in seawater and whole soft tissues of the intertidal mussel Mytilus sp. collected in July 1991 within and around Puget Sound`s Sinclair Inlet. Low variability was observed in the water concentrations collected over three days at control sites, yielding reliable values for the exposure levels experienced by this bioindicator mollusk. Mean water concentrations of acenaphthene, phenanthrene, and fluoranthene in the control region were 2.7 {+-} 0.8, 2.8 {+-} 0.8, and 3.1 {+-} 0.7 ng/liter, respectively. Levels measured near sites of vessel activity were higher but much more variable; this reduced the reliability of the tissue/water bioconcentration factors (BCF) obtained from these samples. An empirical model relating values of Log BCF and Log Kow for the control zone samples supports the utility of this estuarine bioindicator for monitoring general levels of PAH in nearshore surface waters.

  14. Nuclear facility licensing, documentaion, and reviews, and the SP-100 test site experience

    SciTech Connect (OSTI)

    Cornwell, B.C.; Deobald, T.L.; Bitten, E.J.

    1991-06-01

    The required approvals and permits to test a nuclear facility are extensive. Numerous regulatory requirements result in the preparation of documentation to support the approval process. The principal regulations for the SP-100 Ground Engineering System (GES) include the National Environmental Policy Act, Clean Air Act, and Atomic Energy Act. The documentation prepared for the SP-100 Nuclear Assembly Test (NAT) included an Environmental Assessment, state permit applications, and Safety Analysis Reports. This paper discusses the regulation documentation requirements and the SP-100 NAT Test Site experience. 12 refs., 2 figs., 2 tabs.

  15. The conjugate gradient NAS parallel benchmark on the IBM SP1

    SciTech Connect (OSTI)

    Trefethen, A.E.; Zhang, T.

    1994-12-31

    The NAS Parallel Benchmarks are a suite of eight benchmark problems developed at the NASA Ames Research Center. They are specified in such a way that the benchmarkers are free to choose the language and method of implementation to suit the system in which they are interested. In this presentation the authors will discuss the Conjugate Gradient benchmark and its implementation on the IBM SP1. The SP1 is a parallel system which is comprised of RS/6000 nodes connected by a high performance switch. They will compare the results of the SP1 implementation with those reported for other machines. At this time, such a comparison shows the SP1 to be very competitive.

  16. Cyanobacterium sp. host cell and vector for production of chemical compounds in cyanobacterial cultures

    SciTech Connect (OSTI)

    Piven, Irina; Friedrich, Alexandra; Duhring, Ulf; Uliczka, Frank; Baier, Kerstin; Inaba, Masami; Shi, Tuo; Wang, Kui; Enke, Heike; Kramer, Dan

    2014-09-30

    A cyanobacterial host cell, Cyanobacterium sp., that harbors at least one recombinant gene for the production of a chemical compounds is provided, as well as vectors derived from an endogenous plasmid isolated from the cell.

  17. FY 2014 Senior Executive Service (SES) and Senior Professional (SP) Performance Appraisal Cycle- Closeout Guidance

    Broader source: Energy.gov [DOE]

    The FY 2014 performance appraisal cycle for both SES and SP members, which includes Senior Level (SL) and Scientific or Professional (ST) employees, concludes on September 30, 2014.  In order to...

  18. Cyanobacterium sp. host cell and vector for production of chemical compounds in Cyanobacterial cultures

    DOE Patents [OSTI]

    Piven, Irina; Friedrich, Alexandra; Duhring, Ulf; Uliczka, Frank; Baier, Kerstin; Inaba, Masami; Shi, Tuo; Wang, Kui; Enke, Heike; Kramer, Dan

    2016-04-19

    A cyanobacterial host cell, Cyanobacterium sp., that harbors at least one recombinant gene for the production of a chemical compounds is provided, as well as vectors derived from an endogenous plasmid isolated from the cell.

  19. ARM - Field Campaign - SP2 Deployment at Boston College-Aerodyne...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Deployment at Boston College-Aerodyne led Coated Black Carbon Study (BC4) ARM Data ... Campaign : SP2 Deployment at Boston College-Aerodyne led Coated Black Carbon Study (BC4) ...

  20. SP2 Deployment at Boston College-Aerodyne-Led Coated Black Carbon...

    Office of Scientific and Technical Information (OSTI)

    Coated Black Carbon Study (BC4) Final Campaign Summary Citation Details In-Document Search Title: SP2 Deployment at Boston College-Aerodyne-Led Coated Black Carbon Study (BC4) ...

  1. Energia Servizi Engineering SpA E S Engineering | Open Energy...

    Open Energy Info (EERE)

    SpA (E&S Engineering) Place: Rome, Italy Sector: Hydro, Wind energy Product: Italian developer of biogas, wind, mini-hydro and PV projects. Coordinates: 41.90311,...

  2. Microsoft PowerPoint - AAVP.ASTM.Monterey..ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARM Science Team Meeting Hyatt Regency Monterey Monterey, CA Rickey Petty March 29 th , 2007 ARM Aerial Vehicle Program (AAVP) ARM-UAV conducted 12 major field campaigns Field Campaigns to date: Fall 1993, Edwards AFB, CA Spring 1994, Northern OK Fall 1995, Northern OK Spring 1996, Northern OK Fall 1996, Northern OK Fall 1997, Northern OK Spring 1999, PMRF Kauai, HI Summer 1999, Monterey, CA Winter 2000, Northern OK Fall 2002, Northern OK Fall 2004, North Slope, AK Winter 2006, Darwin, Australia

  3. Biodiesel Progress: ASTM Specifications and 2nd Generation Biodiesel

    Broader source: Energy.gov [DOE]

    Presentation given at the 2007 Diesel Engine-Efficiency & Emissions Research Conference (DEER 2007). 13-16 August, 2007, Detroit, Michigan. Sponsored by the U.S. Department of Energy's (DOE) Office of FreedomCAR and Vehicle Technologies (OFCVT).

  4. ASTM E948 Photovoltaic Cell Measurements Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  5. Bio sorption of strontium from aqueous solution by New Strain Bacillus sp. GTG-83

    SciTech Connect (OSTI)

    Tajer Mohammad Ghazvini, P.; Ghorbanzadeh Mashkani, S.; Ghafourian, H.

    2007-07-01

    Attempt was made to isolate bacterial strains capable of removing Sr biologically. In this study we collected ten different water samples from naturally radioactive spring Neydasht in Iran and bacterial strains samples isolated. Initial screening of a total of 50 bacterial isolates resulted in selection of one strain. The strain showed maximum adsorption capacity with 55 mg Sr/g dry wt. It was tentatively identified as Bacillus sp. according to morphological and biochemical properties and called strain GTG-83. Studies indicated that Bacillus sp. GTG-83 was able to grow aerobically in the presence of 50 mM SrCl{sub 2} but showed severe growth inhibition at levels above that concentration. The bio-sorption capacity of Bacillus sp. GTG-83 strongly depends on solution pH, and the maximum Sr sorption capacity of Bacillus sp. GTG-83 were obtained at pH 10 independent of the absence or the presence of increasing concentrations of salt (MgCl{sub 2}). Sr-salt bio-sorption studies were also performed at this pH values. Equilibrium uptakes of Sr increased with increasing Sr concentrations up to 250 mg/l for Bacillus sp. GTG-83. Maximum bio-sorption of Sr was obtained at temperatures in the range of 30-35 deg. C. Bacillus sp. GTG-83 bio-sorbed 97 mg Sr/g dry wt at 100 mg/l initial Sr concentration without salt medium (MgCl{sub 2}). When salt concentration (MgCl{sub 2}) increased to 15% (w/v), these values dropped to 23.6 mg Sr/g dry wt at the same conditions. Uptake of Sr within 5 min of incubation was relatively rapid and the absorption continued slowly thereafter. (authors)

  6. ARM - Field Campaign - Colorado: SP2 Deployment at StormVEx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SP2 Deployment at StormVEx ARM Data Discovery Browse Data Related Campaigns Colorado: The Storm Peak Lab Cloud Property Validation Experiment (STORMVEX) 2010.11.15, Mace, AMF Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign : Colorado: SP2 Deployment at StormVEx 2010.11.15 - 2011.04.25 Lead Scientist : Arthur Sedlacek For data sets, see below. Abstract How does the boundary layer influence BC encapsulation? Is there a correlation between

  7. SP-100 planetary mission/system preliminary design study. Final report, technical information report

    SciTech Connect (OSTI)

    Jones, R.M.

    1986-02-01

    This report contains a discussion on many aspects of a nuclear electric propulsion planetary science mission and spacecraft using the proposed SP-100 nuclear power subsystem. A review of the science rationale for such missions is included. A summary of eleven nuclear electric propulsion planetary missions is presented. A conceptual science payload, mission design, and spacecraft design is included for the Saturn Ring Rendezvous mission. Spacecraft and mission costs have been estimated for two potential sequences of nuclear electric propulsion planetary missions. The integration issues and requirements on the proposed SP-100 power subsystems are identified.

  8. Overview of the 1985 NASA Lewis Research Center SP-100 free-piston Stirling engine activities

    SciTech Connect (OSTI)

    Slaby, J.G.

    1985-01-01

    An overview of the 1985 (NASA) Lewis Research Center free-piston Stirling engine activities in support of the SP-100 Program is presented. The SP-100 program is being conducted in support of the Department of Advanced Research Projects Agency (DARPA) and the Department of Energy (DOE), and NASA. This effort is keyed on the design, fabrication, assembly, and testing of a 25 kW(e) Stirling space-power technology-feasibility demonstrator engine. Another facet of the SP-100 project covers the status of a 9000-h goal endurance test conducted on a 2 kW(e) free-piston Stirling/linear alternator system employing hydrostatic gas bearings. Dynamic balancing of the RE-1000 engine (a 1 kW(e) free-piston Stirling engine) using a passive dynamic absorber is discussed, along with the results of a parametric study showing the relationships of Stirling power converter specific weight and efficiency as functions of Stirling engine heater to cooler temperature ratio. Planned tests are described covering a hydrodynamic gas bearing concept for potential SP-100 application.

  9. Genome Sequence of the Alkaline-Tolerant Cellulomonas sp. Strain FA1

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cohen, Michael F.; Hu, Ping; Nguyen, My Vu; Kamennaya, Nina; Brown, Natasha; Woyke, Tanja; Kyrpides, Nikos; Holman, Hoi-Ying; Torok, Tamas

    2015-06-18

    We present the genome of the cellulose-degrading Cellulomonas sp. strain FA1 isolated from an actively serpentinizing highly alkaline spring. Knowledge of this genome will enable studies into the molecular basis of plant material degradation in alkaline environments and inform the development of lignocellulose bioprocessing procedures for biofuel production.

  10. Genome Sequence of the Alkaline-Tolerant Cellulomonas sp. Strain FA1

    SciTech Connect (OSTI)

    Cohen, Michael F.; Hu, Ping; Nguyen, My Vu; Kamennaya, Nina; Brown, Natasha; Woyke, Tanja; Kyrpides, Nikos; Holman, Hoi-Ying; Torok, Tamas

    2015-06-18

    We present the genome of the cellulose-degrading Cellulomonas sp. strain FA1 isolated from an actively serpentinizing highly alkaline spring. Knowledge of this genome will enable studies into the molecular basis of plant material degradation in alkaline environments and inform the development of lignocellulose bioprocessing procedures for biofuel production.

  11. AmeriFlux US-SP1 Slashpine-Austin Cary- 65yrs nat regen

    SciTech Connect (OSTI)

    Martin, Tim

    2016-01-01

    This is the AmeriFlux version of the carbon flux data for the site US-SP1 Slashpine-Austin Cary- 65yrs nat regen. Site Description - The ACMF site is a 67 hectare naturally regenerated Pinus palustris and Pinus elliottii mixed stand.

  12. Genome Sequence of Amycolatopsis sp Strain ATCC 39116, a Plant Biomass-Degrading Actinomycete

    SciTech Connect (OSTI)

    Davis, Jennifer R.; Goodwin, Lynne A.; Woyke, Tanja; Teshima, Hazuki; Bruce, David; Detter, J. Chris; Tapia, Roxanne; Han, Shunsheng; Han, James; Pitluck, Sam; Nolan, Matt; Mikhailova, Natalia; Land, Miriam L; Sello, Jason K.

    2012-01-01

    We announce the availability of a high-quality draft of the genome sequence of Amycolatopsis sp. strain 39116, one of few bacterial species that are known to consume the lignin component of plant biomass. This genome sequence will further ongoing efforts to use microorganisms for the conversion of plant biomass into fuels and high-value chemicals.

  13. Environmental assessment of SP-100 ground engineering system test site: Hanford Site, Richland, Washington

    SciTech Connect (OSTI)

    Not Available

    1988-12-01

    The US Department of Energy (DOE) proposes to modify an existing reactor containment building (decommissioned Plutonium Recycle Test Reactor (PRTR) 309 Building) to provide ground test capability for the prototype SP-100 reactor. The 309 Building (Figure 1.1) is located in the 300 Area on the Hanford Site in Washington State. The National Environmental Policy Act (NEPA) requires that Federal agencies assess the potential impacts that their actions may have on the environment. This Environmental Assessment describes the consideration given to environmental impacts during reactor concept and test site selection, examines the environmental effects of the DOE proposal to ground test the nuclear subsystem, describes alternatives to the proposed action, and examines radiological risks of potential SP-100 use in space. 73 refs., 19 figs., 7 tabs.

  14. Direct synthesis of sp-bonded carbon chains on graphite surface by femtosecond laser irradiation

    SciTech Connect (OSTI)

    Hu, A.; Rybachuk, M.; Lu, Q.-B.; Duley, W. W.

    2007-09-24

    Microscopic phase transformation from graphite to sp-bonded carbon chains (carbyne) and nanodiamond has been induced by femtosecond laser pulses on graphite surface. UV/surface enhanced Raman scattering spectra and x-ray photoelectron spectra displayed the local synthesis of carbyne in the melt zone while nanocrystalline diamond and trans-polyacetylene chains form in the edge area of gentle ablation. These results evidence possible direct 'writing' of variable chemical bonded carbons by femtosecond laser pulses for carbon-based applications.

  15. Metal Catalyzed sp2 Bonded Carbon - Large-scale Graphene Synthesis and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Beyond | MIT-Harvard Center for Excitonics Metal Catalyzed sp2 Bonded Carbon - Large-scale Graphene Synthesis and Beyond December 1, 2009 at 3pm/36-428 Peter Sutter Center for Functional Nanomaterials sutter abstract: Carbon honeycomb lattices have shown a number of remarkable properties. When wrapped up into fullerenes, for instance, superconductivity with high transition temperatures can be induced by alkali intercalation. Rolling carbon sheets up into 1-dimensional nanotubes generates the

  16. Spectral SP: A New Approach to Mapping Reservoir Flow and Permeability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Spectral SP: A New Approach to Mapping Reservoir Flow and Permeability Donald Thomas University of Hawaii Hawaii Institute of Geophysics and Planetology Research and Development/Geophysics Project Officer: Mark Ziegenbein Total Project Funding: $ $1,106,271 April 24, 2013 This presentation does not contain any proprietary confidential, or otherwise restricted information. 2 | US DOE Geothermal Office eere.energy.gov Relevance/Impact of Research Statement of the Problem * Surface exploration

  17. PySP : modeling and solving stochastic mixed-integer programs in Python.

    SciTech Connect (OSTI)

    Woodruff, David L.; Watson, Jean-Paul

    2010-08-01

    Although stochastic programming is a powerful tool for modeling decision-making under uncertainty, various impediments have historically prevented its widespread use. One key factor involves the ability of non-specialists to easily express stochastic programming problems as extensions of deterministic models, which are often formulated first. A second key factor relates to the difficulty of solving stochastic programming models, particularly the general mixed-integer, multi-stage case. Intricate, configurable, and parallel decomposition strategies are frequently required to achieve tractable run-times. We simultaneously address both of these factors in our PySP software package, which is part of the COIN-OR Coopr open-source Python project for optimization. To formulate a stochastic program in PySP, the user specifies both the deterministic base model and the scenario tree with associated uncertain parameters in the Pyomo open-source algebraic modeling language. Given these two models, PySP provides two paths for solution of the corresponding stochastic program. The first alternative involves writing the extensive form and invoking a standard deterministic (mixed-integer) solver. For more complex stochastic programs, we provide an implementation of Rockafellar and Wets Progressive Hedging algorithm. Our particular focus is on the use of Progressive Hedging as an effective heuristic for approximating general multi-stage, mixed-integer stochastic programs. By leveraging the combination of a high-level programming language (Python) and the embedding of the base deterministic model in that language (Pyomo), we are able to provide completely generic and highly configurable solver implementations. PySP has been used by a number of research groups, including our own, to rapidly prototype and solve difficult stochastic programming problems.

  18. Overview of free-piston Stirling SP-100 activities at the NASA Lewis Research Center

    SciTech Connect (OSTI)

    Slaby, J.G.

    1986-01-01

    An overview of the National Aeronautics and Space Administration (NASA) Lewis Research Center (LeRC) SP-100 free-piston Stirling engine activities is presented. These activities are being conducted in support of the Department of Defense (DOD), Department of Energy (DOE), and NASA. The space-power technology effort, under SP-100, addresses the status of the 25 kWe Space Power Demonstrator Engine (SPDE). Another facet of the SP-100 project covers the status of an endurance test. Dynamic balancing of the SPDE engine will be discussed along with a summary covering the parametric results of a study showing the relationship between power-converter specific weight and efficiency both as a function of Stirling engine heater to cooler temperature ratio. Design parameters and conceptual design features will be presented for a 25 kWe, single-cylinder free-piston Stirling space-power converter. And finally, a description of a hydrodynamic gas bearing concept will be presented.

  19. Complete genome sequences of Geobacillus sp. WCH70, a thermophilic strain isolated from wood compost

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Brumm, Phillip; Land, Miriam L.; Mead, David

    2016-04-27

    Geobacillus sp. WCH70 was one of several thermophilic organisms isolated from hot composts in the Middleton, WI area. Comparison of 16 S rRNA sequences showed the strain may be a new species, and is most closely related to G. galactosidasius and G. toebii. The genome was sequenced, assembled, and annotated by the DOE Joint Genome Institute and deposited at the NCBI in December 2009 (CP001638). The genome of Geobacillus species WCH70 consists of one circular chromosome of 3,893,306 bp with an average G + C content of 43 %, and two circular plasmids of 33,899 and 10,287 bp with anmore » average G + C content of 40 %. Among sequenced organisms, Geobacillus sp. WCH70 shares highest Average Nucleotide Identity (86 %) with G. thermoglucosidasius strains, as well as similar genome organization. Geobacillus sp. WCH70 appears to be a highly adaptable organism, with an exceptionally high 125 annotated transposons in the genome. The organism also possesses four predicted restriction-modification systems not found in other Geobacillus species.« less

  20. Gas production and behavior in the coolant of the SP-100 Space Nuclear Power System

    SciTech Connect (OSTI)

    McGhee, J.M.

    1989-08-01

    The radiologic generation and subsequent behavior of helium gas in the lithium coolant of SP-100 class space nuclear power reactors was investigated analytically in a two part study. Part One of the study consisted of a calculation of coolant radiologic helium gas production rates in a SP-100 class reactor using the discrete ordinates code TWODANT. Cross sections were developed from ENDF/B-V data via the MATXS6s master cross section library. Cross sections were self shielded assuming one homogeneous core region, and doppler broadened to 1300 K using the cross section preparation code TRANSX. Calculations were performed using an S{sub 4}/P{sub 1} approximation and 80 neutron energy groups. Part Two of the study consisted of a theoretical investigation into the behavior of helium gas in the primary loop of lithium cooled space reactors. The SP-100 space power system was used as a representative of such a system. Topics investigated included: (1) heterogeneous and homogeneous nucleation; (2) bubble growth/collapse by diffusion, mechanical temperature/pressure effects, and coalescence; and, (3) the effects on bubble distribution of microgravity, magnetic fields, and inertially induced buoyancy. 104 refs., 78 figs., 28 tabs.

  1. Investigation of refractory black carbon-containing particle morphologies using the single-particle soot photometer (SP2)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sedlacek, III, Arthur J.; Lewis, Ernie R.; Onasch, Timothy B.; Lambe, Andrew T.; Davidovits, Paul

    2015-07-24

    An important source of uncertainty in radiative forcing by absorbing aerosol particles is the uncertainty in their morphologies (i.e., the location of the absorbing substance on/in the particles). To examine the effects of particle morphology on the response of an individual black carbon-containing particle in a Single-Particle Soot Photometer (SP2), a series of experiments was conducted to investigate black carbon-containing particles of known morphology using Regal black (RB), a proxy for collapsed soot, as the light-absorbing substance. Particles were formed by coagulation of RB with either a solid substance (sodium chloride or ammonium sulfate) or a liquid substance (dioctyl sebacate),more » and by condensation with dioctyl sebacate, the latter experiment forming particles in a core-shell configuration. Each particle type experienced fragmentation (observed as negative lagtimes), and each yielded similar lagtime responses in some instances, confounding attempts to differentiate particle morphology using current SP2 lagtime analysis. SP2 operating conditions, specifically laser power and sample flow rate, which in turn affect the particle heating and dissipation rates, play an important role in the behavior of particles in the SP2, including probability of fragmentation. This behavior also depended on the morphology of the particles and on the thermo-chemical properties of the non-RB substance. Although these influences cannot currently be unambiguously separated, the SP2 analysis may still provide useful information on particle mixing states and black carbon particle sources.« less

  2. Investigation of refractory black carbon-containing particle morphologies using the single-particle soot photometer (SP2)

    SciTech Connect (OSTI)

    Sedlacek, III, Arthur J.; Lewis, Ernie R.; Onasch, Timothy B.; Lambe, Andrew T.; Davidovits, Paul

    2015-07-24

    An important source of uncertainty in radiative forcing by absorbing aerosol particles is the uncertainty in their morphologies (i.e., the location of the absorbing substance on/in the particles). To examine the effects of particle morphology on the response of an individual black carbon-containing particle in a Single-Particle Soot Photometer (SP2), a series of experiments was conducted to investigate black carbon-containing particles of known morphology using Regal black (RB), a proxy for collapsed soot, as the light-absorbing substance. Particles were formed by coagulation of RB with either a solid substance (sodium chloride or ammonium sulfate) or a liquid substance (dioctyl sebacate), and by condensation with dioctyl sebacate, the latter experiment forming particles in a core-shell configuration. Each particle type experienced fragmentation (observed as negative lagtimes), and each yielded similar lagtime responses in some instances, confounding attempts to differentiate particle morphology using current SP2 lagtime analysis. SP2 operating conditions, specifically laser power and sample flow rate, which in turn affect the particle heating and dissipation rates, play an important role in the behavior of particles in the SP2, including probability of fragmentation. This behavior also depended on the morphology of the particles and on the thermo-chemical properties of the non-RB substance. Although these influences cannot currently be unambiguously separated, the SP2 analysis may still provide useful information on particle mixing states and black carbon particle sources.

  3. High-quality permanent draft genome sequence of the Parapiptadenia rigida-nodulating Burkholderia sp. strain UYPR1.413

    SciTech Connect (OSTI)

    De Meyer, Sofie E.; Fabiano, Elena; Tian, Rui; Van Berkum, Peter; Seshadri, Rekha; Reddy, T. B. K.; Markowitz, Victor; Ivanova, Natalia; Pati, Amrita; Woyke, Tanja; Howieson, John; Kyrpides, Nikos; Reeve, Wayne

    2015-06-04

    We report that Burkholderia sp. strain UYPR1.413 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from a root nodule of Parapiptadenia rigida collected at the Angico plantation, Mandiyu, Uruguay, in December 2006. A survey of symbionts of P. rigida in Uruguay demonstrated that this species is nodulated predominantly by Burkholderia microsymbionts. Moreover, Burkholderia sp. strain UYPR1.413 is a highly efficient nitrogen fixing symbiont with this host. Currently, the only other sequenced isolate to fix with this host is Cupriavidus sp. UYPR2.512. Therefore, Burkholderia sp. strain UYPR1.413 was selected for sequencing on the basis of its environmental and agricultural relevance to issues in global carbon cycling, alternative energy production, and biogeochemical importance, and is part of the GEBA-RNB project. Here we describe the features of Burkholderia sp. strain UYPR1.413, together with sequence and annotation. The 10,373,764 bp high-quality permanent draft genome is arranged in 336 scaffolds of 342 contigs, contains 9759 protein-coding genes and 77 RNA-only encoding genes.

  4. High-quality permanent draft genome sequence of the Parapiptadenia rigida-nodulating Burkholderia sp. strain UYPR1.413

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    De Meyer, Sofie E.; Fabiano, Elena; Tian, Rui; Van Berkum, Peter; Seshadri, Rekha; Reddy, T. B. K.; Markowitz, Victor; Ivanova, Natalia; Pati, Amrita; Woyke, Tanja; et al

    2015-06-04

    We report that Burkholderia sp. strain UYPR1.413 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from a root nodule of Parapiptadenia rigida collected at the Angico plantation, Mandiyu, Uruguay, in December 2006. A survey of symbionts of P. rigida in Uruguay demonstrated that this species is nodulated predominantly by Burkholderia microsymbionts. Moreover, Burkholderia sp. strain UYPR1.413 is a highly efficient nitrogen fixing symbiont with this host. Currently, the only other sequenced isolate to fix with this host is Cupriavidus sp. UYPR2.512. Therefore, Burkholderia sp. strain UYPR1.413 was selected for sequencing on the basis of its environmental and agriculturalmore » relevance to issues in global carbon cycling, alternative energy production, and biogeochemical importance, and is part of the GEBA-RNB project. Here we describe the features of Burkholderia sp. strain UYPR1.413, together with sequence and annotation. The 10,373,764 bp high-quality permanent draft genome is arranged in 336 scaffolds of 342 contigs, contains 9759 protein-coding genes and 77 RNA-only encoding genes.« less

  5. Genomes of three facultatively symbiotic Frankia sp. strainsreflect host plant biogeography

    SciTech Connect (OSTI)

    Normand, Philippe; Lapierre, Pascal; Tisa, Louis S.; Gogarten, J.Peter; Alloisio, Nicole; Bagnarol, Emilie; Bassi, Carla A.; Berry,Alison; Bickhart, Derek M.; Choisne, Nathalie; Couloux, Arnaud; Cournoyer, Benoit; Cruveiller, Stephane; Daubin, Vincent; Demange, Nadia; Francino, M. Pilar; Ggoltsman, Eugene; Huang, Ying; Kopp, Olga; Labarre,Laurent; Lapidus, Alla; Lavire, Celine; Marechal, Joelle; Martinez,Michele; Mastronunzio, Juliana E.; Mullin, Beth; Niemann, James; Pujic,Pierre; Rawnsley, Tania; Rouy, Zoe; Schenowitz, Chantal; Sellstedt,Anita; Tavares, Fernando; Tomkins, Jeffrey P.; Vallenet, David; Valverde,Claudio; Wall, Luis; Wang, Ying; Medigue, Claudine; Benson, David R.

    2006-02-01

    Filamentous actinobacteria from the genus Frankia anddiverse woody trees and shrubs together form N2-fixing actinorhizal rootnodule symbioses that are a major source of new soil nitrogen in widelydiverse biomes 1. Three major clades of Frankia sp. strains are defined;each clade is associated with a defined subset of plants from among theeight actinorhizal plant families 2,3. The evolution arytrajectoriesfollowed by the ancestors of both symbionts leading to current patternsof symbiont compatibility are unknown. Here we show that the competingprocesses of genome expansion and contraction have operated in differentgroups of Frankia strains in a manner that can be related to thespeciation of the plant hosts and their geographic distribution. Wesequenced and compared the genomes from three Frankia sp. strains havingdifferent host plant specificities. The sizes of their genomes variedfrom 5.38 Mbp for a narrow host range strain (HFPCcI3) to 7.50Mbp for amedium host range strain (ACN14a) to 9.08 Mbp for a broad host rangestrain (EAN1pec.) This size divergence is the largest yet reported forsuch closely related bacteria. Since the order of divergence of thestrains is known, the extent of gene deletion, duplication andacquisition could be estimated and was found to be inconcert with thebiogeographic history of the symbioses. Host plant isolation favoredgenome contraction, whereas host plant diversification favored genomeexpansion. The results support the idea that major genome reductions aswell as expansions can occur in facultatively symbiotic soil bacteria asthey respond to new environments in the context of theirsymbioses.

  6. Genome sequence and description of the anaerobic lignin-degrading bacterium Tolumonas lignolytica sp. nov.

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Billings, Andrew F.; Fortney, Julian L.; Hazen, Terry C.; Simmons, Blake; Davenport, Karen W.; Goodwin, Lynne; Ivanova, Natalia; Kyrpides, Nikos C.; Mavromatis, Konstantinos; Woyke, Tanja; et al

    2015-11-19

    Tolumonas lignolytica BRL6-1T sp. nov. is the type strain of T. lignolytica sp. nov., a proposed novel species of the Tolumonas genus. This strain was isolated from tropical rainforest soils based on its ability to utilize lignin as a sole carbon source. Cells of Tolumonas lignolytica BRL6-1T are mesophilic, non-spore forming, Gram-negative rods that are oxidase and catalase negative. The genome for this isolate was sequenced and returned in seven unique contigs totaling 3.6Mbp, enabling the characterization of several putative pathways for lignin breakdown. Particularly, we found an extracellular peroxidase involved in lignin depolymerization, as well as several enzymes involvedmore » in β-aryl ether bond cleavage, which is the most abundant linkage between lignin monomers. We also found genes for enzymes involved in ferulic acid metabolism, which is a common product of lignin breakdown. Finally, by characterizing pathways and enzymes employed in the bacterial breakdown of lignin in anaerobic environments, this work should assist in the efficient engineering of biofuel production from lignocellulosic material.« less

  7. Genome sequence and description of the anaerobic lignin-degrading bacterium Tolumonas lignolytica sp. nov.

    SciTech Connect (OSTI)

    Billings, Andrew F.; Fortney, Julian L.; Hazen, Terry C.; Simmons, Blake; Davenport, Karen W.; Goodwin, Lynne; Ivanova, Natalia; Kyrpides, Nikos C.; Mavromatis, Konstantinos; Woyke, Tanja; DeAngelis, Kristen M.

    2015-11-19

    Tolumonas lignolytica BRL6-1T sp. nov. is the type strain of T. lignolytica sp. nov., a proposed novel species of the Tolumonas genus. This strain was isolated from tropical rainforest soils based on its ability to utilize lignin as a sole carbon source. Cells of Tolumonas lignolytica BRL6-1T are mesophilic, non-spore forming, Gram-negative rods that are oxidase and catalase negative. The genome for this isolate was sequenced and returned in seven unique contigs totaling 3.6Mbp, enabling the characterization of several putative pathways for lignin breakdown. Particularly, we found an extracellular peroxidase involved in lignin depolymerization, as well as several enzymes involved in β-aryl ether bond cleavage, which is the most abundant linkage between lignin monomers. We also found genes for enzymes involved in ferulic acid metabolism, which is a common product of lignin breakdown. Finally, by characterizing pathways and enzymes employed in the bacterial breakdown of lignin in anaerobic environments, this work should assist in the efficient engineering of biofuel production from lignocellulosic material.

  8. High-quality permanent draft genome sequence of the Parapiptadenia rigida-nodulating Cupriavidus sp. strain UYPR2.512

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    De Meyer, Sofie E.; Fabiano, Elena; Tian, Rui; Van Berkum, Peter; Seshadri, Rekha; Reddy, T. B. K.; Markowitz, Victor; Ivanova, Natalia N.; Pati, Amrita; Woyke, Tanja; et al

    2015-04-11

    Cupriavidus sp. strain UYPR2.512 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from a root nodule of Parapiptadenia rigida grown in soils from a native forest of Uruguay. Here we describe the features of Cupriavidus sp. strain UYPR2.512, together with sequence and annotation. We find the 7,858,949 bp high-quality permanent draft genome is arranged in 365 scaffolds of 369 contigs, contains 7,411 protein-coding genes and 76 RNA-only encoding genes, and is part of the GEBA-RNB project proposal.

  9. A reliability and mass perspective of SP-100 Stirling cycle lunar-base powerplant designs

    SciTech Connect (OSTI)

    Bloomfield, H.S.

    1991-06-01

    The purpose was to obtain reliability and mass perspectives on selection of space power system conceptual designs based on SP-100 reactor and Stirling cycle power-generation subsystems. The approach taken was to: (1) develop a criterion for an acceptable overall reliability risk as a function of the expected range of emerging technology subsystem unit reliabilities; (2) conduct reliability and mass analyses for a diverse matrix of 800-kWe lunar-base design configurations employing single and multiple powerplants with both full and partial subsystem redundancy combinations; and (3) derive reliability and mass perspectives on selection of conceptual design configurations that meet an acceptable reliability criterion with the minimum system mass increase relative to reference powerplant design. The developed perspectives provided valuable insight into the considerations required to identify and characterize high-reliability and low-mass lunar-base powerplant conceptual design.

  10. Additive synthesis with DIASS-M4C on Argonne National Laboratory`s IBM POWERparallel System (SP)

    SciTech Connect (OSTI)

    Kaper, H.; Ralley, D.; Restrepo, J.; Tiepei, S.

    1995-12-31

    DIASS-M4C, a digital additive instrument was implemented on the Argonne National Laboratory`s IBM POWER parallel System (SP). This paper discusses the need for a massively parallel supercomputer and shows how the code was parallelized. The resulting sounds and the degree of control the user can have justify the effort and the use of such a large computer.

  11. Draft genome sequence of Thauera sp. strain SWB20, isolated from a Singapore wastewater treatment facility using gel microdroplets

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dichosa, Armand E. K.; Davenport, Karen W.; Li, Po-E; Ahmed, Sanaa A.; Daligault, Hajnalka; Gleasner, Cheryl D.; Kunde, Yuliya; McMurry, Kim; Lo, Chien -Chi; Reitenga, Krista G.; et al

    2015-03-19

    In this study, we report here the genome sequence of Thauera sp. strain SWB20, isolated from a Singaporean wastewater treatment facility using gel microdroplets (GMDs) and single-cell genomics (SCG). This approach provided a single clonal microcolony that was sufficient to obtain a 4.9-Mbp genome assembly of an ecologically relevant Thauera species.

  12. The oncoprotein HBXIP upregulates PDGFB via activating transcription factor Sp1 to promote the proliferation of breast cancer cells

    SciTech Connect (OSTI)

    Zhang, Yingyi; Zhao, Yu; Li, Leilei; Shen, Yu; Cai, Xiaoli; Zhang, Xiaodong; Ye, Lihong

    2013-05-03

    Highlights: HBXIP is able to upregulate the expression of PDGFB in breast cancer cells. HBXIP serves as a coactivator of activating transcription factor Sp1. HBXIP stimulates the PDGFB promoter via activating transcription factor Sp1. HBXIP promotes the proliferation of breast cancer cell via upregulating PDGFB. -- Abstract: We have reported that the oncoprotein hepatitis B virus X-interacting protein (HBXIP) acts as a novel transcriptional coactivator to promote proliferation and migration of breast cancer cells. Previously, we showed that HBXIP was able to activate nuclear factor-?B (NF-?B) in breast cancer cells. As an oncogene, the platelet-derived growth factor beta polypeptide (PDGFB) plays crucial roles in carcinogenesis. In the present study, we found that both HBXIP and PDGFB were highly expressed in breast cancer cell lines. Interestingly, HBXIP was able to increase transcriptional activity of NF-?B through PDGFB, suggesting that HBXIP is associated with PDGFB in the cells. Moreover, HBXIP was able to upregulate PDGFB at the levels of mRNA, protein and promoter in the cells. Then, we identified that HBXIP stimulated the promoter of PDGFB through activating transcription factor Sp1. In function, HBXIP enhanced the proliferation of breast cancer cells through PDGFB in vitro. Thus, we conclude that HBXIP upregulates PDGFB via activating transcription factor Sp1 to promote proliferation of breast cancer cells.

  13. Draft genome sequence of Sulfurospirillum sp. strain MES, reconstructed from the metagenome of a microbial electrosynthesis system

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ross, Daniel E.; Marshall, Christopher W.; May, Harold D.; Norman, R. Sean

    2015-01-15

    A draft genome of Sulfurospirillum sp. strain MES was isolated through taxonomic binning of a metagenome sequenced from a microbial electrosynthesis system (MES) actively producing acetate and hydrogen. The genome contains the nosZDFLY genes, which are involved in nitrous oxide reduction, suggesting the potential role of this strain in denitrification.

  14. Draft genome sequence of Sulfurospirillum sp. strain MES, reconstructed from the metagenome of a microbial electrosynthesis system

    SciTech Connect (OSTI)

    Ross, Daniel E.; Marshall, Christopher W.; May, Harold D.; Norman, R. Sean

    2015-01-15

    A draft genome of Sulfurospirillum sp. strain MES was isolated through taxonomic binning of a metagenome sequenced from a microbial electrosynthesis system (MES) actively producing acetate and hydrogen. The genome contains the nosZDFLY genes, which are involved in nitrous oxide reduction, suggesting the potential role of this strain in denitrification.

  15. Collection efficiency of the soot-particle aerosol mass spectrometer (SP-AMS) for internally mixed particulate black carbon

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Willis, M. D.; Lee, A. K. Y.; Onasch, T. B.; Fortner, E. C.; Williams, L. R.; Lambe, A. T.; Worsnop, D. R.; Abbatt, J. P. D.

    2014-12-18

    The soot-particle aerosol mass spectrometer (SP-AMS) uses an intra-cavity infrared laser to vaporize refractory black carbon (rBC) containing particles, making the particle beam–laser beam overlap critical in determining the collection efficiency (CE) for rBC and associated non-refractory particulate matter (NR-PM). This work evaluates the ability of the SP-AMS to quantify rBC and NR-PM mass in internally mixed particles with different thicknesses of organic coating. Using apparent relative ionization efficiencies for uncoated and thickly coated rBC particles, we report measurements of SP-AMS sensitivity to NR-PM and rBC, for Regal Black, the recommended particulate calibration material. Beam width probe (BWP) measurements aremore » used to illustrate an increase in sensitivity for highly coated particles due to narrowing of the particle beam, which enhances the CE of the SP-AMS by increasing the laser beam–particle beam overlap. Assuming complete overlap for thick coatings, we estimate CE for bare Regal Black particles of 0.6 ± 0.1, which suggests that previously measured SP-AMS sensitivities to Regal Black were underestimated by up to a factor of 2. The efficacy of the BWP measurements is highlighted by studies at a busy road in downtown Toronto and at a non-roadside location, which show particle beam widths similar to, but greater than that of bare Regal Black and coated Regal Black, respectively. Further BWP measurements at field locations will help to constrain the range of CE for fresh and aged rBC-containing particles. The ability of the SP-AMS to quantitatively assess the composition of internally mixed particles is validated through measurements of laboratory-generated organic coated particles, which demonstrate that the SP-AMS can quantify rBC and NR-PM over a wide range of particle compositions and rBC core sizes.« less

  16. Collection efficiency of the Soot-Particle Aerosol Mass Spectrometer (SP-AMS) for internally mixed particulate black carbon

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Willis, M. D.; Lee, A. K. Y.; Onasch, T. B.; Fortner, E. C.; Williams, L. R.; Lambe, A. T.; Worsnop, D. R.; Abbatt, J. P. D.

    2014-05-26

    The soot-particle aerosol mass spectrometer (SP-AMS) uses an intra-cavity infrared laser to vaporize refractory black carbon (rBC) containing particles, making the particle beam–laser beam overlap critical in determining the collection efficiency (CE) for rBC and associated non-refractory particulate matter (NR-PM). This work evaluates the ability of the SP-AMS to quantify rBC and NR-PM mass in internally mixed particles with different thicknesses of organic coating. Using apparent relative ionization efficiencies for uncoated and thickly coated rBC particles, we report measurements of SP-AMS sensitivity to NR-PM and rBC, for Regal Black, the recommended particulate calibration material. Beam width probe (BWP) measurements aremore » used to illustrate an increase in sensitivity for highly coated particles due to narrowing of the particle beam, which enhances the CE of the SP-AMS by increasing the laser beam–particle beam overlap. Assuming complete overlap for thick coatings, we estimate CE for bare Regal Black particles of 0.6 ± 0.1, which suggests that previously measured SP-AMS sensitivities to Regal Black were underestimated by up to a factor of two. The efficacy of the BWP measurements is highlighted by studies at a busy road in downtown Toronto and at a non-roadside location, which show particle beam widths similar to, but greater than that of bare Regal Black and coated Regal Black, respectively. Further BWP measurements at field locations will help to constrain the range of CE for fresh and aged rBC-containing particles. The ability of the SP-AMS to quantitatively assess the composition of internally mixed particles is validated through measurements of laboratory-generated organic coated particles, which demonstrate that the SP-AMS can quantify rBC and NR-PM over a wide range of particle compositions and rBC core sizes.« less

  17. Raman chemical imaging of the rhizosphere bacterium Pantoea sp. YR343 and its co-culture with Arabidopsis thaliana

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Polisetti, Sneha; Bible, Amber N.; Morrell-Falvey, Jennifer L.; Bohn, Paul W.

    2016-02-29

    Chemical imaging of plant-bacteria co-cultures renders it possible to characterize bacterial populations and behaviors and their interactions with proximal organisms, under conditions closest to the environment in the rhizosphere. Here Raman micro-spectroscopy and confocal Raman imaging are used as minimally invasive probes to study the rhizosphere bacterial isolate, Pantoea sp. YR343, and its co-culture with model plant Arabidopsis thaliana by combining enhanced Raman spectroscopies with electron microscopy and principal component analysis (PCA). The presence of carotenoid pigments in the wild type Pantoea sp. YR343 was characterized using resonance Raman scattering, which was also used to confirm successful disruption of themore » crtB gene in an engineered carotenoid mutant strain. Other components of the Pantoea sp. YR343 cells were imaged in the presence of resonantly enhanced pigments using a combination of surface enhanced Raman imaging and PCA. Pantoea sp. YR343 cells decorated with Ag colloid synthesized ex situ gave spectra dominated by carotenoid scattering, whereas colloids synthesized in situ produced spectral signatures characteristic of flavins in the cell membrane. Scanning electron microscopy (SEM) of whole cells and transmission electron microscopy (TEM) images of thinly sliced cross-sections were used to assess structural integrity of the coated cells and to establish the origin of spectral signatures based on the position of Ag nanoparticles in the cells. Finally, raman imaging was also used to characterize senescent green Arabidopsis thaliana plant roots inoculated with Pantoea sp. YR343, and PCA was used to distinguish spectral contributions from plant and bacterial cells, thereby establishing the potential of Raman imaging to visualize the distribution of rhizobacteria on plant roots.« less

  18. Substrate doping: A strategy for enhancing reactivity on gold nanocatalysts by tuning sp bands

    SciTech Connect (OSTI)

    Mammen, Nisha; Narasimhan, Shobhana; Gironcoli, Stefano de

    2015-10-14

    We suggest that the reactivity of Au nanocatalysts can be greatly increased by doping the oxide substrate on which they are placed with an electron donor. To demonstrate this, we perform density functional theory calculations on a model system consisting of a 20-atom gold cluster placed on a MgO substrate doped with Al atoms. We show that not only does such substrate doping switch the morphology of the nanoparticles from the three-dimensional tetrahedral form to the two-dimensional planar form, but it also significantly lowers the barrier for oxygen dissociation by an amount proportional to the dopant concentration. At a doping level of 2.78%, the dissociation barrier is reduced by more than half, which corresponds to a speeding up of the oxygen dissociation rate by five orders of magnitude at room temperature. This arises from a lowering in energy of the s and p states of Au. The d states are also lowered in energy, however, this by itself would have tended to reduce reactivity. We propose that a suitable measure of the reactivity of Au nanoparticles is the difference in energy of sp and d states.

  19. Lunar electric power systems utilizing the SP-100 reactor coupled to dynamic conversion systems. Final report

    SciTech Connect (OSTI)

    Harty, R.B.; Durand, R.E.

    1993-03-01

    An integration study was performed by Rocketdyne under contract to NASA-LeRC. The study was concerned with coupling an SP-0100 reactor to either a Brayton or Stirling power conversion system. The application was for a surface power system to supply power requirements to a lunar base. A power level of 550 kWe was selected based on the NASA Space Exploration Initiative 90-day study. Reliability studies were initially performed to determine optimum power conversion redundancy. This study resulted in selecting three operating engines and one stand-by unit. Integration design studies indicated that either the Brayton or Stirling power conversion systems could be integrated with the PS-100 reactor. The Stirling system had an integration advantage because of smaller piping size and fewer components. The Stirling engine, however, is more complex and heavier than the Brayton rotating unit, which tends to off-set the Stirling integration advantage. From a performance consideration, the Brayton had a 9 percent mass advantage, and the Stirling had a 50 percent radiator advantage.

  20. High-quality permanent draft genome sequence of the Lebeckia ambigua-nodulating Burkholderia sp. strain WSM4176

    SciTech Connect (OSTI)

    De Meyer, Sofie E.; Tian, Rui; Seshadri, Rekha; Reddy, TBK; Markowitz, Victor; Ivanova, Natalia; Pati, Amrita; Woyke, Tanja; Kyrpides, Nikos; Yates, Ron; Howieson, John; Reeve, Wayne

    2015-10-16

    We report that Burkholderia sp. strain WSM4176 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective N2-fixing root nodule of Lebeckia ambigua collected in Nieuwoudtville, Western Cape of South Africa, in October 2007. This plant persists in infertile, acidic and deep sandy soils, and is therefore an ideal candidate for a perennial based agriculture system in Western Australia. Here we describe the features of Burkholderia sp. strain WSM4176, which represents a potential inoculant quality strain for L. ambigua, together with sequence and annotation. The 9,065,247 bp high-quality-draft genome is arranged in 13 scaffolds of 65 contigs, contains 8369 protein-coding genes and 128 RNA-only encoding genes, and is part of the GEBA-RNB project proposal (Project ID 882).

  1. High-quality permanent draft genome sequence of the Lebeckia ambigua-nodulating Burkholderia sp. strain WSM4176

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    De Meyer, Sofie E.; Tian, Rui; Seshadri, Rekha; Reddy, TBK; Markowitz, Victor; Ivanova, Natalia; Pati, Amrita; Woyke, Tanja; Kyrpides, Nikos; Yates, Ron; et al

    2015-10-16

    We report that Burkholderia sp. strain WSM4176 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective N2-fixing root nodule of Lebeckia ambigua collected in Nieuwoudtville, Western Cape of South Africa, in October 2007. This plant persists in infertile, acidic and deep sandy soils, and is therefore an ideal candidate for a perennial based agriculture system in Western Australia. Here we describe the features of Burkholderia sp. strain WSM4176, which represents a potential inoculant quality strain for L. ambigua, together with sequence and annotation. The 9,065,247 bp high-quality-draft genome is arranged in 13 scaffolds of 65 contigs,more » contains 8369 protein-coding genes and 128 RNA-only encoding genes, and is part of the GEBA-RNB project proposal (Project ID 882).« less

  2. Isolation, purification and spectrometric analysis of PSP toxins from moraxella sp., a bacterium associated with a toxic dinoflagellate

    SciTech Connect (OSTI)

    Boyce, S.D.; Doucette, G.J.

    1994-12-31

    Paralytic shellfish poisoning (PSP) is a seafood intoxication syndrome caused by the injestion of shellfish contaminated with toxins produced by algae known as dinoflagellates. The PSP toxins, saxitoxin and its derivatives, act to block voltage-dependent sodium channels and can cause paralysis and even death at higher doses. It is well documented that bacteria coexist with many harmful or toxic algal species, though the exact nature of the association in relation to toxin production is unknown. Recently, the bacterium Moraxella sp. was isolated from the PSP toxin producing dinoflagellate Alexandrium tamarense. Through HPLC analysis and saxitoxin receptor binding assays performed on crude bacterial extracts, it appears that Moraxella sp. is capable of producing saxitoxin and several of its derivatives. However, physical confirmation (e.g. mass spectrometry) of these results is still needed.

  3. Transcriptional Responses to Sucrose Mimic the Plant-Associated Life Style of the Plant Growth Promoting Endophyte Enterobacter sp. 638

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Taghavi, Safiyh; Wu, Xiao; Ouyang, Liming; Zhang, Yian Biao; Stadler, Andrea; McCorkle, Sean; Zhu, Wei; Maslov, Sergei; van der Lelie, Daniel

    2015-01-21

    Growth in sucrose medium was previously found to trigger the expression of functions involved in the plant associated life style of the endophytic bacterium Enterobacter sp. 638. Therefore, comparative transcriptome analysis between cultures grown in sucrose or lactate medium was used to gain insights in the expression levels of bacterial functions involved in the endophytic life style of strain 638. Growth on sucrose as a carbon source resulted in major changes in cell physiology, including a shift from a planktonic life style to the formation of bacterial aggregates. This shift was accompanied by a decrease in transcription of genes involvedmore » in motility (e.g. flagella biosynthesis) and an increase in the transcription of genes involved in colonization, adhesion and biofilm formation. The transcription levels of functions previously suggested as being involved in endophytic behavior and functions responsible for plant growth promoting properties, including the synthesis of indole-acetic acid, acetoin and 2,3-butanediol, also increased significantly for cultures grown in sucrose medium. Interestingly, despite an abundance of essential nutrients transcription levels of functions related to uptake and processing of nitrogen and iron became increased for cultures grown on sucrose as sole carbon source. Transcriptome data were also used to analyze putative regulatory relationships. In addition to the small RNA csrABCD regulon, which seems to play a role in the physiological adaptation and possibly the shift between free-living and plant-associated endophytic life style of Enterobacter sp. 638, our results also pointed to the involvement of rcsAB in controlling responses by Enterobacter sp. 638 to a plant-associated life style. Lastly, targeted mutagenesis was used to confirm this role and showed that compared to wild-type Enterobacter sp. 638 a ΔrcsB mutant was affected in its plant growth promoting ability.« less

  4. Transcriptional Responses to Sucrose Mimic the Plant-Associated Life Style of the Plant Growth Promoting Endophyte Enterobacter sp. 638

    SciTech Connect (OSTI)

    Taghavi, Safiyh; Wu, Xiao; Ouyang, Liming; Zhang, Yian Biao; Stadler, Andrea; McCorkle, Sean; Zhu, Wei; Maslov, Sergei; van der Lelie, Daniel

    2015-01-21

    Growth in sucrose medium was previously found to trigger the expression of functions involved in the plant associated life style of the endophytic bacterium Enterobacter sp. 638. Therefore, comparative transcriptome analysis between cultures grown in sucrose or lactate medium was used to gain insights in the expression levels of bacterial functions involved in the endophytic life style of strain 638. Growth on sucrose as a carbon source resulted in major changes in cell physiology, including a shift from a planktonic life style to the formation of bacterial aggregates. This shift was accompanied by a decrease in transcription of genes involved in motility (e.g. flagella biosynthesis) and an increase in the transcription of genes involved in colonization, adhesion and biofilm formation. The transcription levels of functions previously suggested as being involved in endophytic behavior and functions responsible for plant growth promoting properties, including the synthesis of indole-acetic acid, acetoin and 2,3-butanediol, also increased significantly for cultures grown in sucrose medium. Interestingly, despite an abundance of essential nutrients transcription levels of functions related to uptake and processing of nitrogen and iron became increased for cultures grown on sucrose as sole carbon source. Transcriptome data were also used to analyze putative regulatory relationships. In addition to the small RNA csrABCD regulon, which seems to play a role in the physiological adaptation and possibly the shift between free-living and plant-associated endophytic life style of Enterobacter sp. 638, our results also pointed to the involvement of rcsAB in controlling responses by Enterobacter sp. 638 to a plant-associated life style. Lastly, targeted mutagenesis was used to confirm this role and showed that compared to wild-type Enterobacter sp. 638 a ΔrcsB mutant was affected in its plant growth promoting ability.

  5. Overview of the 1986 free-piston Stirling SP-100 activities at the NASA Lewis Research Center

    SciTech Connect (OSTI)

    Slaby, J.G.

    1986-01-01

    An overview of the National Aeronautics and Space Administration (NASA) Lewis Research Center SP-100 free-piston Stirling engine activities is presented. These activities include a free-piston Stirling space-power technology feasibility demonstration project as part of the SP-100 program being conducted in support of the Department of Defense (DOD), Department of Energy (DOE), and NASA. The space-power Stirling advanced technology effort, under SP-100, addresses the status of the 25 kWe Space Power Demonstrator Engine (SPDE) including test results. Future space-power projections are presented along with a description of a study that will investigate the feasibility of scaling a single-cylinder free-piston Stirling space-power module to the 150 kW power range. Design parameters and conceptual design features will be presented for a 25 kWe, single-cylinder free-piston Stirling space-power converter. A description of a hydrodynamic gas bearing concept will be presented whereby the displacer of a 1 kWe free-piston Stirling engine is modified to demonstrate the bearing concept. And finally the goals of a conceptual design for a 25 kWe Solar Advanced Stirling Conversion System capable of delivering electric power to an electric utility grid will be discussed. The solar work is under an interagency agreement between DOE/Sandia National Laboratory and NASA Lewis.

  6. Elastic properties, sp³ fraction, and Raman scattering in low and high pressure synthesized diamond-like boron rich carbides

    SciTech Connect (OSTI)

    Zinin, Pavel V.; Burgess, Katherine; Jia, Ruth; Sharma, Shiv; Ming, Li-Chung; Liu, Yongsheng; Ciston, Jim; Hong, Shiming

    2014-10-07

    Dense BC{sub x} phases with high boron concentration are predicted to be metastable, superhard, and conductors or superconductors depending on boron concentration. However, up to this point, diamond-like boron rich carbides BC{sub x} (dl-BC{sub x}) phases have been thought obtainable only through high pressure and high temperature treatment, necessitating small specimen volume. Here, we use electron energy loss spectroscopy combined with transmission electron microscopy, Raman spectroscopy, surface Brillouin scattering, laser ultrasonics (LU) technique, and analysis of elastic properties to demonstrate that low pressure synthesis (chemical vapor deposition) of BC{sub x} phases may also lead to the creation of diamond-like boron rich carbides. The elastic properties of the dl-BC{sub x} phases depend on the carbon sp²versus sp³ content, which decreases with increasing boron concentration, while the boron bonds determine the shape of the Raman spectra of the dl-BC{sub x} after high pressure-high temperature treatment. Using the estimation of the density value based on the sp³ fraction, the shear modulus μ of dl-BC₄, containing 10% carbon atoms with sp³ bonds, and dl-B₃C₂, containing 38% carbon atoms with sp³ bonds, were found to be μ = 19.3 GPa and μ = 170 GPa, respectively. The presented experimental data also imply that boron atoms lead to a creation of sp³ bonds during the deposition processes.

  7. Description of Rhodanobacter denitrificans sp. nov., isolated from nitrate-rich zones of a contaminated aquifer

    SciTech Connect (OSTI)

    Prakash, Om; Green, Stefan; Jasrotia, Puja; Overholt, Will; Canion, Andy; Watson, David B; Brooks, Scott C; Kostka,

    2012-01-01

    Bacterial strains 2APBS1T and 116-2 were isolated from the subsurface of a nuclear legacy waste site where sediments are co-contaminated with large amounts of acidity, nitrate, metal radionuclides and other heavy metals. A combination of physiological and genetic assays indicated that these strains represent the first members of the Rhodanobacter genus shown to be capable of complete denitrification. Cells of strain 2APBS1T and 116-2 were Gram negative, non-spore-forming, rods, 3-5 micro;m long and 0.25-0.5 m in diameter. The isolates were facultative anaerobes, and had temperature and pH optima for growth at 30 C and pH 6.5, respectively, and could tolerate up to 2.0 % NaCl, though growth improved in its absence. Strains 2APBS1T and 116-2 contained fatty acid profiles and 100 % Q-8 ubiquinone, that are characteristic features of the genus Rhodanobacter. Although strains 2APBS1T and 116-2 share high SSU rRNA gene sequence similarity to R. thiooxydans (>99%), DNA-DNA hybridization values were substantially below the 70% threshold used to designate novel species. Thus, based on genotypic, phylogenetic, chemotaxonomic and physiological differences, strains 2APBS1T and 116-2 are considered to represent a novel species of the genus Rhodanobacter, for which the name Rhodanobacter denitrificans sp. nov is proposed. The type strain is 2APBS1T (=DSM 23569T =JCM 17641T). Strain 116-2 (=DSM 24678 = JCM 17642) is a reference strain.

  8. Characterization of an acetyl xylan esterase from the anaerobic fungus Orpinomyces sp. strain PC-2

    SciTech Connect (OSTI)

    Blum, D.L.; Li, X.L.; Chen, H.; Ljungdahl, L.G.

    1999-09-01

    A 1,067-bp cDNA, designated axeA, coding for an acetyl xylan esterase (AxeA) was cloned from the anaerobic rumen fungus Orpinomyces sp. strain PC-2. The gene had an open reading frame of 939 bp encoding a polypeptide of 313 amino acid residues with a calculated mass of 34,845 Da. An active esterase using the original start codon of the cDNA was synthesized in Escherichia coli. Two active forms of the esterase were purified from recombinant E. coli cultures. The size difference of 8 amino acids was a result of cleavages at two different sites within the signal peptide. The enzyme released acetate from several acetylated substrates, including acetylated xylan. The activity toward acetylated xylan was tripled in the presence of recombinant xylanase A from the same fungus. Using p-nitrophenyl acetate as a substrate, the enzyme had a K{sub m} of 0.9 mM and a V{sub max} of 785 {micro}mol min{sup {minus}} mg{sup {minus}1}. It had temperature and pH optima of 30 C and 9.0, respectively. AxeA had 56% amino acid identity with BnaA, an acetyl xylan esterase of Neocallimastix patriciarum, but the Orpinomyces AxeA was devoid of a noncatalytic repeated peptide domain (NCRPD) found at the carboxy terminus of the Neocallimastix BnaA. The NCRPD found in many glycosyl hydrolases and esterases of anaerobic fungi has been postulated to function as a docking domain for cellulase-hemicellulase complexes, similar to the dockerin of the cellulosome of Clostridium thermocellum.

  9. SpArcFiRe: Scalable automated detection of spiral galaxy arm segments

    SciTech Connect (OSTI)

    Davis, Darren R.; Hayes, Wayne B. E-mail: whayes@uci.edu

    2014-08-01

    Given an approximately centered image of a spiral galaxy, we describe an entirely automated method that finds, centers, and sizes the galaxy (possibly masking nearby stars and other objects if necessary in order to isolate the galaxy itself) and then automatically extracts structural information about the spiral arms. For each arm segment found, we list the pixels in that segment, allowing image analysis on a per-arm-segment basis. We also perform a least-squares fit of a logarithmic spiral arc to the pixels in that segment, giving per-arc parameters, such as the pitch angle, arm segment length, location, etc. The algorithm takes about one minute per galaxies, and can easily be scaled using parallelism. We have run it on all ?644,000 Sloan objects that are larger than 40 pixels across and classified as 'galaxies'. We find a very good correlation between our quantitative description of a spiral structure and the qualitative description provided by Galaxy Zoo humans. Our objective, quantitative measures of structure demonstrate the difficulty in defining exactly what constitutes a spiral 'arm', leading us to prefer the term 'arm segment'. We find that pitch angle often varies significantly segment-to-segment in a single spiral galaxy, making it difficult to define the pitch angle for a single galaxy. We demonstrate how our new database of arm segments can be queried to find galaxies satisfying specific quantitative visual criteria. For example, even though our code does not explicitly find rings, a good surrogate is to look for galaxies having one long, low-pitch-angle armwhich is how our code views ring galaxies. SpArcFiRe is available at http://sparcfire.ics.uci.edu.

  10. Effect of mono- and dichromatic light quality on growth rates and photosynthetic performance of Synechococcus sp. PCC 7002

    SciTech Connect (OSTI)

    Bernstein, Hans C.; Konopka, Allan; Melnicki, Matthew R.; Hill, Eric A.; Kucek, Leo A.; Zhang, Shuyi; Shen, Gaozhong; Bryant, Donald A.; Beliaev, Alex S.

    2014-09-19

    Synechococcus sp. PCC 7002 was grown to steady state in optically thin turbidostat cultures under conditions for which light quantity and quality was systematically varied by modulating the output of narrow-band LEDs. Cells were provided photons absorbed primarily by chlorophyll (680 nm) or phycocyanin (630 nm) as the organism was subjected to four distinct mono- and dichromatic regimes. During cultivation with dichromatic light, growth rates displayed by Synechococcus sp. PCC 7002 were generally proportional to the total incident irradiance at values < 275 mol photons m-2 s-1 and were not affected by the ratio of 630:680 nm wavelengths. Notably, under monochromatic light conditions, cultures exhibited similar growth rates only when they were irradiated with 630 nm light; cultures irradiated with only 680 nm light grew at rates that were 60 70% of those under other light quality regimes at equivalent irradiances. The functionality of photosystem II and associated processes such as maximum rate of photosynthetic electron transport, rate of cyclic electron flow, and rate of dark respiration generally increased as a function of growth rate. Nonetheless, some of the photophysiological parameters measured here displayed distinct patterns with respect to growth rate of cultures adapted to a single wavelength including phycobiliprotein content, which increased under severely light-limited growth conditions. Additionally, the ratio of photosystem II to photosystem I increased approximately 40% over the range of growth rates, although cells grown with 680 nm light only had the highest ratios. These results suggest the presence of effective mechanisms which allow acclimation of Synechococcus sp. PCC 7002 acclimation to different irradiance conditions.

  11. Reversible elastic deformation of functionalized sp{sup 2} carbon at pressures of up to 33?GPa

    SciTech Connect (OSTI)

    Soignard, Emmanuel; Hochheimer, Hans D.; Yarger, Jeff; Raj, Rishi

    2014-10-06

    We show that sp{sup 2} carbon bonded to silicon and oxygen can withstand reversible elastic deformation at pressures of up to 33?GPa. These experiments were carried out in a diamond anvil cell. In-situ Raman spectroscopy was employed to record the reversibility of elastic deformation by measuring the movement in the D and G peaks of carbon. Above 33?GPa the material, a silicon oxycarbide, transforms into an unidentified state which is retained upon unloading down to ambient pressure. Thermodynamical analysis suggests that the material could have transformed into a crystalline state at these ultrahigh pressures, driven by mechanical work.

  12. Nondestructive and automated testing for soil and rock properties. ASTM special technical publication 1350

    SciTech Connect (OSTI)

    Marr, W.A.; Fairhurst, C.E.

    1999-07-01

    The purpose of the symposium was to highlight recent developments in nondestructive and automated testing for soil and rock properties. Speakers present results of recent research in these areas that have practical application for the rapid and economical testing of soil and rock. Authors were encouraged to identify which testing equipment and methods have sufficient practical application to warrant standards development.

  13. Field instrumentation for soil and rock. ASTM special technical publication 1358

    SciTech Connect (OSTI)

    Durham, G.N.; Marr, W.A.

    1999-07-01

    Papers are arranged under the following topical sections: Instrumentation associated with soil structure interaction; Instrumentation support construction activities; Instrumentation to monitor landfills; Instrumentation for monitoring settlement and stability; Data acquisition and data management; and Instrumentation for measuring physical properties in the field. Papers within scope have been processed separately for inclusion on the data base.

  14. Observation of Cleavage Fracture after Substantial Dimple Rupture in ASTM A710 Steel

    SciTech Connect (OSTI)

    Reuter, Walter Graham; Lloyd, Wilson Randolph

    2000-07-01

    A major concern often arising in structural integrity predictions is the possibility that low-energy brittle fracture could result as a consequence of cleavage either under normal operating or design accident conditions. This can be especially troublesome when the leak-before-break (LBB) approach shows an additional safety margin of the design. For LBB to be applicable, the fracture process must remain ductile (dimple rupture), and not change to cleavage. The American Society for Mechanical Engineers Boiler and Pressure Vessel Code (Code) provides guidelines for avoiding cleavage fracture for Code-accepted materials. Experimental results for a non-Code steel are provided, and show that cleavage may occur for a thickness under16 mm (where the code suggests it will not) after stable crack growth (?a) of up to 20 mm. This work is still in progress; test results are provided along with possible reasons for the mode transition, but complete explanations are still being developed.

  15. High-quality permanent draft genome sequence of the Mimosa asperata - nodulating Cupriavidus sp. strain AMP6

    SciTech Connect (OSTI)

    De Meyer, Sofie E.; Parker, Matthew; Van Berkum, Peter; Tian, Rui; Seshadri, Rekha; Reddy, T. B. K.; Markowitz, Victor; Ivanova, Natalia; Pati, Amrita; Woyke, Tanja; Kyrpides, Nikos; Howieson, John; Reeve, Wayne

    2015-10-16

    Cupriavidus sp. strain AMP6 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from a root nodule of Mimosa asperata collected in Santa Ana National Wildlife Refuge, Texas, in 2005. Mimosa asperata is the only legume described so far to exclusively associates with Cupriavidus symbionts. Furthermore, strain AMP6 represents an early-diverging lineage within the symbiotic Cupriavidus group and has the capacity to develop an effective nitrogen-fixing symbiosis with three other species of Mimosa. Here, we describe the genome of Cupriavidus sp. strain AMP6 which enables comparative analyses of symbiotic trait evolution in this genus; the general features, together with sequence and annotation are further discussed. Finally, the 7,579,563 bp high-quality permanent draft genome is arranged in 260 scaffolds of 262 contigs, contains 7,033 protein-coding genes and 97 RNA-only encoding genes, and is part of the GEBA-RNB project proposal.

  16. Expression, purification and preliminary X-ray characterization of dl-2-haloacid dehalogenase from Methylobacterium sp. CPA1

    SciTech Connect (OSTI)

    Omi, Rie; Jitsumori, Keiji; Yamauchi, Takahiro; Ichiyama, Susumu; Kurihara, Tatsuo; Esaki, Nobuyoshi; Kamiya, Nobuo; Hirotsu, Ken Miyahara, Ikuko

    2007-07-01

    A recombinant form of dl-2-haloacid dehalogenase from Methylobacterium sp. CPA1 has been expressed in E. coli, purified and crystallized. The crystal belongs to space group P6{sub 3}. Diffraction data have been collected to 1.75 Å resolution. dl-2-Haloacid dehalogenase from Methylobacterium sp. CPA1 (dl-DEX Mb) is a unique enzyme that catalyzes the dehalogenation reaction without the formation of an ester intermediate. A recombinant form of dl-DEX Mb has been expressed in Escherichia coli, purified and crystallized using the hanging-drop vapour-diffusion method. The crystal belongs to the hexagonal space group P6{sub 3}, with unit-cell parameters a = b = 186.2, c = 114.4 Å. The crystals are likely to contain between four and eight monomers in the asymmetric unit, with a V{sub M} value of 4.20–2.10 Å{sup 3} Da{sup −1}. A self-rotation function revealed peaks on the χ = 180° section. X-ray data have been collected to 1.75 Å resolution.

  17. Spatially-Resolved Analysis of Glycolipids and Metabolites in Living Synechococcus sp. PCC7002 Using Nanospray Desorption Electrospray Ionization

    SciTech Connect (OSTI)

    Lanekoff, Ingela T.; Geydebrekht, Oleg V.; Pinchuk, Grigoriy E.; Konopka, Allan; Laskin, Julia

    2013-04-07

    Microorganisms release a diversity of organic compounds that couple interspecies metabolism, enable communication, or provide benefits to other microbes. Increased knowledge of microbial metabolite production will contribute to understanding of the dynamic microbial world and can potentially lead to new developments in drug discovery, biofuel production, and clinical research. Nanospray desorption electrospray ionization (nano-DESI) is an ambient ionization technique that enables detailed chemical characterization of molecules from a specific location on a surface without special sample pretreatment. Due to its ambient nature, living bacterial colonies growing on agar plates can be rapidly and non-destructively analyzed. We performed spatially resolved nano-DESI analysis of living Synechococcus sp. PCC 7002 colonies on agar plates. We use high resolution mass spectrometry and MS/MS analysis of the living Synechococcus sp. PCC 7002 colonies to detect metabolites and lipids, and confirm their identities. We found that despite the high salt content of the agar (osmolarity ca. 700 mM), nano-DESI analysis enables detailed characterization of metabolites produced by the colony. Using this technique, we identified several glycolipids found on the living colonies and examined the effect of the age of the colony on the chemical gradient of glucosylglycerol secreted onto agar.

  18. Nucleotide sequence of a chromosomal mercury resistance determinant from a Bacillus sp. with broad-spectrum mercury resistance. [Mercury reductase

    SciTech Connect (OSTI)

    Wang, Y.; Levinson, H.S.; Mahler, I. ); Moore, M.; Walsh, C. ); Silver, S. )

    1989-01-01

    A 13.5-kilobase HindIII fragment, bearing an intact mercury resistance (mer) operon, was isolated from chromosomal DNA of broad-spectrum mercury-resistant Bacillus sp. strain RC607 by using as a probe a clone containing the mercury reductase (merA) gene. The new clone, pYW33, expressed broad-spectrum mercury resistance both in Escherichia coli and in Bacillus subtilis, but only in B. subtilis was the mercuric reductase activity inducible. Sequencing of a 1.8-kilobase mercury hypersensitivity-producing fragment revealed four open reading frames (ORFs). ORF1 may code for a regulatory protein (MerR). ORF2 and ORF4 were associated with cellular transport function and the hypersensitivity phenotype. DNA fragments encompassing the merA and the merB genes were sequenced. The predicted Bacillus sp. strain RC607 MerA (mercuric reductase) and MerB (organomercurial lyase) were similar to those predicted from Staphylococcus aureus plasmid pI258 (67 and 73% amino acid identities, respectively); however, only 40% of the amino acid residues of RC607 MerA were identical to those of the mercuric reductase from gram-negative bacteria. A 69-kilodalton polypeptide was isolated and identified as the merA gene product by examination of its amino-terminal sequence.

  19. Evidence regarding the UV sunscreen role of a mycosporine-like compound in the cyanobacterium Gloeocapsa sp

    SciTech Connect (OSTI)

    Garcia-Pichel, F.; Wingard, C.E.; Castenholz, R.W. )

    1993-01-01

    The mycosporine-like amino acids (MAAs) have been thought to serve a UV sunscreen role in organisms that produce or contain them because MAAs present strong absorbance in the UV region and because there is no other apparent biological function. The researchers used the cyanobacterium Gloeocapsa sp. to assess the possible sunscreen role of MAAs. Five conditions are evaluated: (1) absorption of radiation high enough to provide benefit to the organisms; (2) correlation of presence of the compound with enhansed fitness under UV; (3) concentration of the compound and resistance to UV still present under physiological inactivity; (4) effect maximal at wavelengths of maximal absorption; (5) loss of protection after artificial removal of compound. The results indicate that only a small sunscreen effect can be ascribed to the MAA in the Gloecapsa sp. under these experimental conditions. It is possible however, that in the typical undisturbed colonial growth form, MAAs and their screening action may become major factors in resistance to UV radiation. 25 refs., 7 figs., 1 tab.

  20. High-quality permanent draft genome sequence of the Mimosa asperata - nodulating Cupriavidus sp. strain AMP6

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    De Meyer, Sofie E.; Parker, Matthew; Van Berkum, Peter; Tian, Rui; Seshadri, Rekha; Reddy, T. B. K.; Markowitz, Victor; Ivanova, Natalia; Pati, Amrita; Woyke, Tanja; et al

    2015-10-16

    Cupriavidus sp. strain AMP6 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from a root nodule of Mimosa asperata collected in Santa Ana National Wildlife Refuge, Texas, in 2005. Mimosa asperata is the only legume described so far to exclusively associates with Cupriavidus symbionts. Furthermore, strain AMP6 represents an early-diverging lineage within the symbiotic Cupriavidus group and has the capacity to develop an effective nitrogen-fixing symbiosis with three other species of Mimosa. Here, we describe the genome of Cupriavidus sp. strain AMP6 which enables comparative analyses of symbiotic trait evolution in this genus; the general features, together withmore » sequence and annotation are further discussed. Finally, the 7,579,563 bp high-quality permanent draft genome is arranged in 260 scaffolds of 262 contigs, contains 7,033 protein-coding genes and 97 RNA-only encoding genes, and is part of the GEBA-RNB project proposal.« less

  1. Genome Sequence of Thermotoga sp Strain RQ2, a Hyperthermophilic Bacterium Isolated from a Geothermally Heated Region of the Seafloor near Ribeira Quente, the Azores

    SciTech Connect (OSTI)

    Swithers, Kristen S; DiPippo, Jonathan L; Bruce, David; Detter, J. Chris; Tapia, Roxanne; Han, Cliff; Woyke, Tanja; Pitluck, Sam; Pennacchio, Len; Nolan, Matt; Mikhailova, Natalia; Lykidis, A; Land, Miriam L; Stetter, Karl O; Nelson, Karen E; Gogarten, Peter; Noll, Kenneth M

    2011-01-01

    Thermotoga sp. strain RQ2 is probably a strain of Thermotoga maritima. Its complete genome sequence allows for an examination of the extent and consequences of gene flow within Thermotoga species and strains. Thermotoga sp. RQ2 differs from T. maritima in its genes involved in myo-inositol metabolism. Its genome also encodes an apparent fructose phosphotransferase system (PTS) sugar transporter. This operon is also found in Thermotoga naphthophila strain RKU-10 but no other Thermotogales. These are the first reported PTS transporters in the Thermotogales.

  2. High-quality permanent draft genome sequence of the Parapiptadenia rigida-nodulating Cupriavidus sp. strain UYPR2.512

    SciTech Connect (OSTI)

    De Meyer, Sofie E.; Fabiano, Elena; Tian, Rui; Van Berkum, Peter; Seshadri, Rekha; Reddy, T. B. K.; Markowitz, Victor; Ivanova, Natalia N.; Pati, Amrita; Woyke, Tanja; Howieson, John; Kyrpides, Nikos C.; Reeve, Wayne

    2015-04-11

    Cupriavidus sp. strain UYPR2.512 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from a root nodule of Parapiptadenia rigida grown in soils from a native forest of Uruguay. Here we describe the features of Cupriavidus sp. strain UYPR2.512, together with sequence and annotation. We find the 7,858,949 bp high-quality permanent draft genome is arranged in 365 scaffolds of 369 contigs, contains 7,411 protein-coding genes and 76 RNA-only encoding genes, and is part of the GEBA-RNB project proposal.

  3. Mutations that affect structure and assembly of light-harvesting proteins in the cyanobacterium Synechocystis sp. strain 6701

    SciTech Connect (OSTI)

    Anderson, L.K.; Rayner, M.C.; Eiserling, F.A.

    1987-01-01

    The unicellular cyanobacterium Synechocystis sp. strain 6701 was mutagenized with UV irradiation and screened for pigment changes that indicated genetic lesions involving the light-harvesting proteins of the phycobilisome. A previous examination of the pigment mutant UV16 showed an assembly defect in the phycocyanin component of the phycobilisome. Mutagenesis of UV16 produced an additional double mutant, UV16-40, with decreased phycoerythrin content. Phycocyanin and phycoerythrin were isolated from UV16-40 and compared with normal biliproteins. The results suggested that the UV16 mutation affected the alpha subunit of phycocyanin, while the phycoerythrin beta subunit from UV16-40 had lost one of its three chromophores. Characterization of the unassembled phycobilisome components in these mutants suggests that these strains will be useful for probing in vivo the regulated expression and assembly of phycobilisomes.

  4. Genome sequence of Bradyrhizobium sp. WSM1253; a microsymbiont of Ornithopus compressus from the Greek Island of Sifnos

    SciTech Connect (OSTI)

    Tiwari, Ravi; Howieson, John; Yates, Ron; Tian, Rui; Held, Britanny; Tapia, Roxanne; Han, Cliff; Seshadri, Rekha; Reddy, T. B. K.; Huntemann, Marcel; Pati, Amrita; Woyke, Tanja; Markowitz, Victor; Ivanova, Natalia; Kyrpides, Nikos; Reeve, Wayne

    2015-11-30

    Bradyrhizobium sp. WSM1253 is a novel N2-fixing bacterium isolated from a root nodule of the herbaceous annual legume Ornithopus compressus that was growing on the Greek Island of Sifnos. WSM1253 emerged as a strain of interest in an Australian program that was selecting inoculant quality bradyrhizobial strains for inoculation of Mediterranean species of lupins ( Lupinus angustifolius, L. princei, L. atlanticus, L. pilosus ). In this report we describe, for the first time, the genome sequence information and annotation of this legume microsymbiont. The 8,719,808 bp genome has a G + C content of 63.09 % with 71 contigs arranged into two scaffolds. The assembled genome contains 8,432 protein-coding genes, 66 RNA genes and a single rRNA operon. In conclusion, this improved-high-quality draft rhizobial genome is one of 20 sequenced through a DOE Joint Genome Institute 2010 Community Sequencing Project.

  5. Genome sequence of Bradyrhizobium sp. WSM1253; a microsymbiont of Ornithopus compressus from the Greek Island of Sifnos

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tiwari, Ravi; Howieson, John; Yates, Ron; Tian, Rui; Held, Britanny; Tapia, Roxanne; Han, Cliff; Seshadri, Rekha; Reddy, T. B. K.; Huntemann, Marcel; et al

    2015-11-30

    Bradyrhizobium sp. WSM1253 is a novel N2-fixing bacterium isolated from a root nodule of the herbaceous annual legume Ornithopus compressus that was growing on the Greek Island of Sifnos. WSM1253 emerged as a strain of interest in an Australian program that was selecting inoculant quality bradyrhizobial strains for inoculation of Mediterranean species of lupins ( Lupinus angustifolius, L. princei, L. atlanticus, L. pilosus ). In this report we describe, for the first time, the genome sequence information and annotation of this legume microsymbiont. The 8,719,808 bp genome has a G + C content of 63.09 % with 71 contigs arrangedmore » into two scaffolds. The assembled genome contains 8,432 protein-coding genes, 66 RNA genes and a single rRNA operon. In conclusion, this improved-high-quality draft rhizobial genome is one of 20 sequenced through a DOE Joint Genome Institute 2010 Community Sequencing Project.« less

  6. Multi-omic dynamics associate oxygenic photosynthesis with nitrogenase-mediated H2 production in Cyanothece sp. ATCC 51142

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bernstein, Hans C.; Charania, Moiz A.; McClure, Ryan S.; Sadler, Natalie C.; Melnicki, Matthew R.; Hill, Eric A.; Markillie, Lye Meng; Nicora, Carrie D.; Wright, Aaron T.; Romine, Margaret F.; et al

    2015-11-03

    This study combines transcriptomic and proteomic profiling to provide new insights on the metabolic relationship between oxygenic photosynthesis and nitrogenase-mediated H2 production in the model cyanobacterium, Cyanothece sp. ATCC 51142. To date, the proposed mechanisms used to describe the energy metabolism processes that support H2 production in Cyanothece 51142 have assumed that ATP and reductant requirements are derived solely from glycogen oxidation and/or cyclic-electron flow around photosystem I. The results from this study present and test an alternative hypothesis by showing that net-positive rates of oxygenic photosynthesis and increased expression of photosystem II reaction centers correspond and are synchronized withmore » nitrogenase expression and H2 production. These findings provide a new and more complete view on the metabolic processes contributing to the energy budget of photosynthetic H2 production and highlight the likely role of photocatalytic H2O oxidation as a major participating process.« less

  7. Complete genome sequences of Geobacillus sp. Y412MC52, a xylan-degrading strain isolated from obsidian hot spring in Yellowstone National Park

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Brumm, Phillip; Land, Miriam L.; Hauser, Loren J.; Jeffries, Cynthia D.; Chang, Yun-Juan; Mead, David A.

    2015-10-19

    Geobacillus sp. Y412MC52 was isolated from Obsidian Hot Spring, Yellowstone National Park, Montana, USA under permit from the National Park Service. The genome was sequenced, assembled, and annotated by the DOE Joint Genome Institute and deposited at the NCBI in December 2011 (CP002835). Based on 16S rRNA genes and average nucleotide identity, Geobacillus sp. Y412MC52 and the related Geobacillus sp. Y412MC61 appear to be members of a new species of Geobacillus. The genome of Geobacillus sp. Y412MC52 consists of one circular chromosome of 3,628,883 bp, an average G+C content of 52 % and one circular plasmid of 45,057 bp andmore » an average G+C content of 45 %. Y412MC52 possesses arabinan, arabinoglucuronoxylan, and aromatic acid degradation clusters for degradation of hemicellulose from biomass. Lastly, transport and utilization clusters are also present for other carbohydrates including starch, cellobiose, and α- and β-galactooligosaccharides.« less

  8. A Carotenoid-Deficient Mutant in Pantoea sp. YR343, a Bacteria Isolated from the Rhizosphere of Populus deltoides, Is Defective in Root Colonization

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bible, Amber; Fletcher, Sarah J; Pelletier, Dale A; Schadt, Christopher Warren; Jawdy, Sara; Weston, David; Engle, Nancy L.; Tschaplinski, Timothy J.; Masyuko, Rachel; Polisetti, Sneha; et al

    2016-04-18

    The complex interactions between plants and their microbiome can have a profound effect on the health and productivity of the plant host. A better understanding of the microbial mechanisms that promote plant health and stress tolerance will enable strategies for improving the productivity of economically-important plants. Pantoea sp. YR343 is a motile, rod-shaped bacterium isolated from the roots of Populus deltoides that possesses the ability to solubilize phosphate and produce the phytohormone indole-3-acetic acid. Pantoea sp. YR343 readily colonizes plant roots and does not appear to be pathogenic when applied to the leaves or roots of selected plant hosts. Tomore » better understand the molecular mechanisms involved in plant association and rhizosphere survival by Pantoea sp. YR343, we constructed a mutant in which the crtB gene encoding phytoene synthase was deleted. Phytoene synthase is responsible for converting geranylgeranyl pyrophosphate to phytoene, an important precursor to the production of carotenoids. As predicted, the ΔcrtB mutant is defective in carotenoid production, and shows increased sensitivity to oxidative stress. Moreover, we find that the ΔcrtB mutant is impaired in biofilm formation and production of indole-3-acetic acid. Finally we demonstrate that the ΔcrtB mutant shows reduced colonization of plant roots. Taken together, these data suggest that carotenoids are important for plant association and/or rhizosphere survival in Pantoea sp. YR343.« less

  9. Draft Genome Sequence of Streptomyces sp. Strain Wb2n-11, a Desert Isolate with Broad-Spectrum Antagonism against Soilborne Phytopathogens

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Köberl, Martina; White, Richard A.; Erschen, Sabine; El-Arabi, Tarek F.; Jansson, Janet K.; Berg, Gabriele

    2015-08-06

    Streptomyces sp. strain Wb2n-11, isolated from native desert soil, exhibited broad-spectrum antagonism against plant pathogenic fungi, bacteria, and nematodes. The 8.2-Mb draft genome reveals genes putatively responsible for its promising biocontrol activity and genes which enable the soil bacterium to directly interact beneficially with plants.

  10. Draft Genome Sequence of Streptomyces sp. Strain Wb2n-11, a Desert Isolate with Broad-Spectrum Antagonism against Soilborne Phytopathogens

    SciTech Connect (OSTI)

    Köberl, Martina; White, Richard A.; Erschen, Sabine; El-Arabi, Tarek F.; Jansson, Janet K.; Berg, Gabriele

    2015-08-06

    Streptomyces sp. strain Wb2n-11, isolated from native desert soil, exhibited broad-spectrum antagonism against plant pathogenic fungi, bacteria, and nematodes. The 8.2-Mb draft genome reveals genes putatively responsible for its promising biocontrol activity and genes which enable the soil bacterium to directly interact beneficially with plants.

  11. Complete genome sequence of Anaeromyxobacter sp. Fw109-5, an Anaerobic, Metal-Reducing Bacterium Isolated from a Contaminated Subsurface Environment

    SciTech Connect (OSTI)

    Hwang, C.; Copeland, A.; Lucas, Susan; Lapidus, Alla; Barry, Kerrie W.; Glavina del Rio, T.; Dalin, Eileen; Tice, Hope; Pitluck, S.; Sims, David R.; Brettin, T.; Bruce, David; Detter, J. C.; Han, Cliff F.; Schmutz, Jeremy; Larimer, F.; Land, M.; Hauser, L.; Kyrpides, Nikos C.; Lykidis, Athanasios; Richardson, P. M.; Beliaev, Alex S.; Sanford, Robert A.; Loeffler, Frank E.; Fields, Matthew W.

    2015-01-22

    We report the genome sequence of Anaeromyxobacter sp. Fw109-5, isolated from nitrate- and uranium-contaminated subsurface sediment of the Oak Ridge Integrated Field-Scale Subsurface Research Challenge (IFC) site, Oak Ridge Reservation, TN. The bacteriums genome sequence will elucidate its physiological potential in subsurface sediments undergoing in situ uranium bioremediation and natural attenuation.

  12. Draft genome sequence of Streptomyces sp. strain Wb2n-11, a desert isolate with broad-spectrum antagonism against soilborne phytopathogens

    SciTech Connect (OSTI)

    Koeberl, Martina; White, Richard A.; Erschen, Sabine; El-Arabi, Tarek F.; Jansson, Janet K.; Berg, Gabriele

    2015-08-06

    Streptomyces sp. strain Wb2n-11, isolated from native desert soil, exhibited broad-spectrum antagonism against plant pathogenic fungi, bacteria and nematodes. The 8.2 Mb draft genome reveals genes putatively responsible for its promising biocontrol activity and genes which enable the soil bacterium to directly interact beneficially with plants.

  13. Genome Sequence of Halomonas sp. Strain KO116, an Ionic Liquid- Tolerant Marine Bacterium Isolated from a Lignin-Enriched Seawater Microcosm

    SciTech Connect (OSTI)

    O'Dell, Kaela; Woo, Hannah L.; Utturkar, Sagar M.; Klingeman, Dawn Marie; Brown, Steven D.; Hazen, Terry C.

    2015-05-07

    Halomonas sp. strain KO116 was isolated from Nile Delta Mediterranean Sea surface water enriched with insoluble organosolv lignin. It was further screened for growth on alkali lignin minimal salts medium agar. The strain tolerates the ionic liquid 1-ethyl-3-methylimidazolium acetate. Its complete genome sequence is presented in this report.

  14. Complete genome sequence of Anaeromyxobacter sp. Fw109-5, an Anaerobic, Metal-Reducing Bacterium Isolated from a Contaminated Subsurface Environment

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hwang, C.; Copeland, A.; Lucas, Susan; Lapidus, Alla; Barry, Kerrie W.; Glavina del Rio, T.; Dalin, Eileen; Tice, Hope; Pitluck, S.; Sims, David R.; et al

    2015-01-22

    We report the genome sequence of Anaeromyxobacter sp. Fw109-5, isolated from nitrate- and uranium-contaminated subsurface sediment of the Oak Ridge Integrated Field-Scale Subsurface Research Challenge (IFC) site, Oak Ridge Reservation, TN. The bacterium’s genome sequence will elucidate its physiological potential in subsurface sediments undergoing in situ uranium bioremediation and natural attenuation.

  15. The impact of carbon sp{sup 2} fraction of reduced graphene oxide on the performance of reduced graphene oxide contacted organic transistors

    SciTech Connect (OSTI)

    Kang, Narae; Khondaker, Saiful I.

    2014-12-01

    One of the major bottlenecks in fabricating high performance organic field effect transistors (OFETs) is a large interfacial contact barrier between metal electrodes and organic semiconductors (OSCs) which makes the charge injection inefficient. Recently, reduced graphene oxide (RGO) has been suggested as an alternative electrode material for OFETs. RGO has tunable electronic properties and its conductivity can be varied by several orders of magnitude by varying the carbon sp{sup 2} fraction. However, whether the sp{sup 2} fraction of RGO in the electrode affects the performance of the fabricated OFETs is yet to be investigated. In this study, we demonstrate that the performance of OFETs with pentacene as OSC and RGO as electrode can be continuously improved by increasing the carbon sp{sup 2} fraction of RGO. When compared to control palladium electrodes, the mobility of the OFETs shows an improvement of ∼200% for 61% sp{sup 2} fraction RGO, which further improves to ∼500% for 80% RGO electrode. Similar improvements were also observed in current on-off ratio, on-current, and transconductance. Our study suggests that, in addition to π-π interaction at RGO/pentacene interface, the tunable electronic properties of RGO electrode have a significant role in OFETs performance.

  16. Growth of Chlamydomonas reinhardtii in acetate-free medium when co-cultured with alginate-encapsulated, acetate-producing strains of Synechococcus sp. PCC 7002

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Therien, Jesse B.; Zadvornyy, Oleg A.; Posewitz, Matthew C.; Bryant, Donald A.; Peters, John W.

    2014-10-18

    The model alga Chlamydomonas reinhardtii requires acetate as a co-substrate for optimal production of lipids, and the addition of acetate to culture media has practical and economic implications for algal biofuel production. We demonstrate the growth of C. reinhardtii on acetate provided by mutant strains of the cyanobacterium Synechococcus sp. PCC7002.

  17. Complete genome sequence of Anaeromyxobacter sp. Fw109-5, an anaerobic, metal-reducing bacterium isolated from a contaminated subsurface environment

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hwang, C.; Copeland, A.; Lucas, S.; Lapidus, A.; Barry, K.; Glavina del Rio, T.; Dalin, E.; Tice, H.; Pitluck, S.; Sims, D.; et al

    2015-01-22

    We report the genome sequence of Anaeromyxobacter sp. Fw109-5, isolated from nitrate- and uranium-contaminated subsurface sediment of the Oak Ridge Integrated Field-Scale Subsurface Research Challenge (IFC) site, Oak Ridge Reservation, TN. The bacteriums genome sequence will elucidate its physiological potential in subsurface sediments undergoing in situ uranium bioremediation and natural attenuation.

  18. Draft Genome sequence of Frankia sp. Strain QA3, a nitrogen-fixing actinobacterium isolated from the root nodule of Alnus nitida

    SciTech Connect (OSTI)

    Sen, Arnab; Beauchemin, Nicholas; Bruce, David; Chain, Patrick S. G.; Chen, Amy; Davenport, Karen W.; Deshpande, Shweta; Detter, J. Chris; Furnholm, Teal; Ghodhbane-Gtari, Faten; Goodwin, Lynne A.; Gtari, Maher; Han, James; Huntemann, Marcel; Ivanova, N; Kyrpides, Nikos C; Land, Miriam L; Markowitz, Victor; Mavromatis, K; Nolan, Matt; Nouioui, Imen; Pagani, Ioanna; Pati, Amrita; Pitluck, Sam; Santos, Catarina; Sur, Saubashya; Szeto, Ernest; Tavares, Fernando; Teshima, Hazuki; Thakur, Subarna; Wall, Luis; Woyke, Tanja; Wishart, Jessie; Tisa, Louis S.

    2013-01-01

    Members of actinomycete genus Frankia form a nitrogen-fixing symbiosis with 8 different families of actinorhizal plants. We report a high-quality draft genome sequence for Frankia sp. stain QA3, a nitrogen-fixing actinobacterium isolated from root nodules of Alnus nitida.

  19. Draft Genome sequence of Frankia sp. strains CN3 , an atypical, non-infective (Nod-) ineffective (Fix-) isolate from Coriaria nepalensis

    SciTech Connect (OSTI)

    Ghodhbane-Gtari, Faten; Beauchemin, Nicholas; Bruce, David; Chain, Patrick S. G.; Chen, Amy; Davenport, Karen W.; Deshpande, Shweta; Detter, J. Chris; Furnholm, Teal; Goodwin, Lynne A.; Gtari, Maher; Han, Cliff; Han, James; Huntemann, Marcel; Ivanova, N; Kyrpides, Nikos C; Land, Miriam L; Markowitz, Victor; Mavromatis, K; Nolan, Matt; Nouioui, Imen; Pagani, Ioanna; Pati, Amrita; Pitluck, Sam; Santos, Catarina; Sen, Arnab; Sur, Saubashya; Szeto, Ernest; Tavares, Fernando; Hazuki, Teshima; Thakur, Subarna; Wall, Luis; Woyke, Tanja; Tisa, Louis S.

    2013-01-01

    We report here the genome sequence of Frankia sp. strain CN3, which was isolated from Coriaria nepalensis. This genome sequence is the first from the fourth lineage of Frankia, that are unable to re-infect actinorhizal plants. At 10 Mb, it represents the largest Frankia genome sequenced to date.

  20. Draft genome sequence of Thauera sp. strain SWB20, isolated from a Singapore wastewater treatment facility using gel microdroplets

    SciTech Connect (OSTI)

    Dichosa, Armand E. K.; Davenport, Karen W.; Li, Po-E; Ahmed, Sanaa A.; Daligault, Hajnalka; Gleasner, Cheryl D.; Kunde, Yuliya; McMurry, Kim; Lo, Chien -Chi; Reitenga, Krista G.; Daughton, Ashlynn R.; Shen, Xiaohong; Frietze, Seth; Wang, Dongping; Johnson, Shannon L.; Drautz-Moses, Daniela I.; Schuster, Stephan; Chain, Patrick S.; Han, Cliff

    2015-03-19

    In this study, we report here the genome sequence of Thauera sp. strain SWB20, isolated from a Singaporean wastewater treatment facility using gel microdroplets (GMDs) and single-cell genomics (SCG). This approach provided a single clonal microcolony that was sufficient to obtain a 4.9-Mbp genome assembly of an ecologically relevant Thauera species.

  1. Hybrid radiosity-SP{sub 3} equation based bioluminescence tomography reconstruction for turbid medium with low- and non-scattering regions

    SciTech Connect (OSTI)

    Chen, Xueli E-mail: jimleung@mail.xidian.edu.cn; Zhang, Qitan; Yang, Defu; Liang, Jimin E-mail: jimleung@mail.xidian.edu.cn

    2014-01-14

    To provide an ideal solution for a specific problem of gastric cancer detection in which low-scattering regions simultaneously existed with both the non- and high-scattering regions, a novel hybrid radiosity-SP{sub 3} equation based reconstruction algorithm for bioluminescence tomography was proposed in this paper. In the algorithm, the third-order simplified spherical harmonics approximation (SP{sub 3}) was combined with the radiosity equation to describe the bioluminescent light propagation in tissues, which provided acceptable accuracy for the turbid medium with both low- and non-scattering regions. The performance of the algorithm was evaluated with digital mouse based simulations and a gastric cancer-bearing mouse based in situ experiment. Primary results demonstrated the feasibility and superiority of the proposed algorithm for the turbid medium with low- and non-scattering regions.

  2. High-quality permanent draft genome sequence of Bradyrhizobium sp. Th.b2, a microsymbiont of Amphicarpaea bracteata collected in Johnson City, New York

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tian, Rui; Parker, Matthew; Seshadri, Rekha; Reddy, T. B. K.; Markowitz, Victor; Ivanova, Natalia; Pati, Amrita; Woyke, Tanja; Baeshen, Mohammed N.; Baeshen, Nabih A.; et al

    2015-05-16

    Bradyrhizobium sp. Th.b2 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective nitrogen-fixing root nodule of Amphicarpaea bracteata collected in Johnson City, New York. Here we describe the features of Bradyrhizobium sp. Th.b2, together with high-quality permanent draft genome sequence information and annotation. The 10,118,060 high-quality draft genome is arranged in 266 scaffolds of 274 contigs, contains 9,809 protein-coding genes and 108 RNA-only encoding genes. In conclusion, this rhizobial genome was sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project.

  3. Transcriptomic and proteomic dynamics in the metabolism of a diazotrophic cyanobacterium, Cyanothece sp. PCC 7822 during a diurnal light–dark cycle

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Welkie, David; Zhang, Xiaohui; Markillie, Meng; Taylor, Ronald; Orr, Galya; Jacobs, Jon; Bhide, Ketaki; Thimmapuram, Jyothi; Gritsenko, Marina; Mitchell, Hugh; et al

    2014-12-29

    Cyanothece sp. PCC 7822 is an excellent cyanobacterial model organism with great potential to be applied as a biocatalyst for the production of high value compounds. Like other unicellular diazotrophic cyanobacterial species, it has a tightly regulated metabolism synchronized to the light-dark cycle. Utilizing transcriptomic and proteomic methods, we were able to quantify the relationships between transcription and translation underlying central and secondary metabolism in response to nitrogen free, 12 hour light and 12 hour dark conditions.

  4. Transcriptomic and proteomic dynamics in the metabolism of a diazotrophic cyanobacterium, Cyanothece sp. PCC 7822 during a diurnal lightdark cycle

    SciTech Connect (OSTI)

    Welkie, David; Zhang, Xiaohui; Markillie, Meng; Taylor, Ronald; Orr, Galya; Jacobs, Jon; Bhide, Ketaki; Thimmapuram, Jyothi; Gritsenko, Marina; Mitchell, Hugh; Smith, Richard D; Sherman, Louis A

    2014-12-29

    Cyanothece sp. PCC 7822 is an excellent cyanobacterial model organism with great potential to be applied as a biocatalyst for the production of high value compounds. Like other unicellular diazotrophic cyanobacterial species, it has a tightly regulated metabolism synchronized to the light-dark cycle. Utilizing transcriptomic and proteomic methods, we were able to quantify the relationships between transcription and translation underlying central and secondary metabolism in response to nitrogen free, 12 hour light and 12 hour dark conditions.

  5. Modulation of medium-chain fatty acid synthesis in Synechococcus sp. PCC 7002 by replacing FabH with a Chaetoceros Ketoacyl-ACP synthase

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gu, Huiya; Jinkerson, Robert E.; Davies, Fiona K.; Sisson, Lyle A.; Schneider, Philip E.; Posewitz, Matthew C.

    2016-05-26

    The isolation or engineering of algal cells synthesizing high levels of medium-chain fatty acids (MCFAs) is attractive to mitigate the high clouding point of longer chain fatty acids in algal based biodiesel. To develop a more informed understanding of MCFA synthesis in photosynthetic microorganisms, we isolated several algae from Great Salt Lake and screened this collection for MCFA accumulation to identify strains naturally accumulating high levels of MCFA. A diatom, Chaetoceros sp. GSL56, accumulated particularly high levels of C14 (up to 40%), with the majority of C14 fatty acids allocated in triacylglycerols. Using whole cell transcriptome sequencing and de novomore » assembly, putative genes encoding fatty acid synthesis enzymes were identified. Enzymes from this Chaetoceros sp. were expressed in the cyanobacterium Synechococcus sp. PCC 7002 to validate gene function and to determine whether eukaryotic enzymes putatively lacking bacterial evolutionary control mechanisms could be used to improve MCFA production in this promising production strain. Replacement of the Synechococcus 7002 native FabH with a Chaetoceros ketoacyl-ACP synthase Ill increased MCFA synthesis up to fivefold. In conclusion, the level of increase is dependent on promoter strength and culturing conditions.« less

  6. Written testimony SP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Written Testimony of Stewart Prager Director, Princeton Plasma Physics Laboratory Professor of Astrophysical Sciences Princeton University Delivered to the Committee on Science, Space and Technology Subcommittee on Energy For the hearing on April 20, 2016 Thank you for the opportunity to appear before this subcommittee and to offer testimony on the Princeton Plasma Physics Laboratory, PPPL (its mission, current activities, and future opportunities) and the ITER project (its importance and

  7. ARM - Datastreams - sp2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Datastreamssp2 Documentation Data Quality Plots Citation DOI: 10.5439/1182118

  8. Obligate Biotrophy Features Unraveled by the Genomic Analysis of the Rust Fungi, Melampsora larici-populina and Puccinia graminis f. sp. tritici

    SciTech Connect (OSTI)

    Duplessis, Sebastien; Cuomo, Christina A.; Lin, Yao-Cheng; Aerts, Andrea; Tisserant, Emilie; Veneault-Fourrey, Claire; Joly, David L.; Hacquard, Stephane; Amselem, Joelle; Cantarel, Brandi; Chiu, Readman; Couthinho, Pedro; Feau, Nicolas; Field, Matthew; Frey, Pascal; Gelhaye, Eric; Goldberg, Jonathan; Grabherr, Manfred; Kodira, Chinnappa; Kohler, Annegret; Kues, Ursula; Lindquist, Erika; Lucas, Susan; Mago, Rohit; Mauceli, Evan; Morin, Emmanuelle; Murat, Claude; Pangilinan, Jasmyn L.; Park, Robert; Pearson, Matthew; Quesneville, Hadi; Rouhier, Nicolas; Sakthikumar, Sharadha; Salamov, Asaf A.; Schmutz, Jeremy; Selles, Benjamin; Shapiro, Harris; Tangay, Philippe; Tuskan, Gerald A.; Peer, Yves Van de; Henrissat, Bernard; Rouze, Pierre; Ellis, Jeffrey G.; Dodds, Peter N.; Schein, Jacqueline E.; Zhong, Shaobin; Hamelin, Richard C.; Grigoriev, Igor V.; Szabo, Les J.; Martin1, Francis

    2011-04-27

    Rust fungi are some of the most devastating pathogens of crop plants. They are obligate biotrophs, which extract nutrients only from living plant tissues and cannot grow apart from their hosts. Their lifestyle has slowed the dissection of molecular mechanisms underlying host invasion and avoidance or suppression of plant innate immunity. We sequenced the 101 mega base pair genome of Melampsora larici-populina, the causal agent of poplar leaf rust, and the 89 mega base pair genome of Puccinia graminis f. sp. tritici, the causal agent of wheat and barley stem rust. We then compared the 16,841 predicted proteins of M. larici-populina to the 18,241 predicted proteins of P. graminis f. sp tritici. Genomic features related to their obligate biotrophic life-style include expanded lineage-specific gene families, a large repertoire of effector-like small secreted proteins (SSPs), impaired nitrogen and sulfur assimilation pathways, and expanded families of amino-acid, oligopeptide and hexose membrane transporters. The dramatic upregulation of transcripts coding for SSPs, secreted hydrolytic enzymes, and transporters in planta suggests that they play a role in host infection and nutrient acquisition. Some of these genomic hallmarks are mirrored in the genomes of other microbial eukaryotes that have independently evolved to infect plants, indicating convergent adaptation to a biotrophic existence inside plant cells

  9. Integrated in silico analyses of regulatory and metabolic networks of Synechococcus sp. PCC 7002 reveal relationships between gene centrality and essentiality

    SciTech Connect (OSTI)

    Song, Hyun-Seob; McClure, Ryan S.; Bernstein, Hans C.; Overall, Christopher C.; Hill, Eric A.; Beliaev, Alex S.

    2015-03-27

    Cyanobacteria dynamically relay environmental inputs to intracellular adaptations through a coordinated adjustment of photosynthetic efficiency and carbon processing rates. The output of such adaptations is reflected through changes in transcriptional patterns and metabolic flux distributions that ultimately define growth strategy. To address interrelationships between metabolism and regulation, we performed integrative analyses of metabolic and gene co-expression networks in a model cyanobacterium, Synechococcus sp. PCC 7002. Centrality analyses using the gene co-expression network identified a set of key genes, which were defined here as ‘topologically important.’ Parallel in silico gene knock-out simulations, using the genome-scale metabolic network, classified what we termed as ‘functionally important’ genes, deletion of which affected growth or metabolism. A strong positive correlation was observed between topologically and functionally important genes. Functionally important genes exhibited variable levels of topological centrality; however, the majority of topologically central genes were found to be functionally essential for growth. Subsequent functional enrichment analysis revealed that both functionally and topologically important genes in Synechococcus sp. PCC 7002 are predominantly associated with translation and energy metabolism, two cellular processes critical for growth. This research demonstrates how synergistic network-level analyses can be used for reconciliation of metabolic and gene expression data to uncover fundamental biological principles.

  10. Integrated in silico analyses of regulatory and metabolic networks of Synechococcus sp. PCC 7002 reveal relationships between gene centrality and essentiality

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Song, Hyun-Seob; McClure, Ryan S.; Bernstein, Hans C.; Overall, Christopher C.; Hill, Eric A.; Beliaev, Alex S.

    2015-03-27

    Cyanobacteria dynamically relay environmental inputs to intracellular adaptations through a coordinated adjustment of photosynthetic efficiency and carbon processing rates. The output of such adaptations is reflected through changes in transcriptional patterns and metabolic flux distributions that ultimately define growth strategy. To address interrelationships between metabolism and regulation, we performed integrative analyses of metabolic and gene co-expression networks in a model cyanobacterium, Synechococcus sp. PCC 7002. Centrality analyses using the gene co-expression network identified a set of key genes, which were defined here as ‘topologically important.’ Parallel in silico gene knock-out simulations, using the genome-scale metabolic network, classified what we termedmore » as ‘functionally important’ genes, deletion of which affected growth or metabolism. A strong positive correlation was observed between topologically and functionally important genes. Functionally important genes exhibited variable levels of topological centrality; however, the majority of topologically central genes were found to be functionally essential for growth. Subsequent functional enrichment analysis revealed that both functionally and topologically important genes in Synechococcus sp. PCC 7002 are predominantly associated with translation and energy metabolism, two cellular processes critical for growth. This research demonstrates how synergistic network-level analyses can be used for reconciliation of metabolic and gene expression data to uncover fundamental biological principles.« less

  11. Overexpression, purification, crystallization and preliminary X-ray cystallographic studies of a proline-specific aminopeptidase from Aneurinibacillus sp. strain AM-1

    SciTech Connect (OSTI)

    Akioka, Makoto [Department of Applied Biochemistry, Kyoto Prefectural University, Shimogamo, Sakyo, Kyoto 606-8522 (Japan); Nakano, Hiroaki [Department of Structural Biology, Graduate School of Pharmaceutical Sciences, Kyoto University, 46-29 Yoshida Shimoadachi-cho, Sakyo, Kyoto 606-8501 (Japan); Horikiri, Aya; Tsujimoto, Yoshiyuki; Matsui, Hiroshi [Department of Applied Biochemistry, Kyoto Prefectural University, Shimogamo, Sakyo, Kyoto 606-8522 (Japan); Shimizu, Tetsuya; Nakatsu, Toru; Kato, Hiroaki [Department of Structural Biology, Graduate School of Pharmaceutical Sciences, Kyoto University, 46-29 Yoshida Shimoadachi-cho, Sakyo, Kyoto 606-8501 (Japan); Watanabe, Kunihiko, E-mail: kwatanab@kpu.ac.jp [Department of Applied Biochemistry, Kyoto Prefectural University, Shimogamo, Sakyo, Kyoto 606-8522 (Japan)

    2006-12-01

    Preliminary X-ray crystallographic study of a proline-specific aminopepitdase from Aneurinibacillus sp, strain AM-1 was carried out. To elucidate the structure and molecular mechanism of a characteristic proline-specific aminopeptidase produced by the thermophile Aneurinibacillus sp. strain AM-1, its gene was cloned and the recombinant protein was overexpressed in Escherichia coli, purified and crystallized using the hanging-drop vapour-diffusion method. X-ray diffraction data were collected to 1.8 resolution from the recombinant aminopeptidase crystal. The crystals belong to the orthorhombic space group P2{sub 1}2{sub 1}2, with unit-cell parameters a = 93.62, b = 68.20, c = 76.84 . A complete data set was also obtained from crystals of SeMet-substituted aminopeptidase. Data in the resolution range 202.1 from the MAD data set from the SeMet-substituted crystal were used for phase determination.

  12. Coal liquefaction process wherein jet fuel, diesel fuel and/or ASTM No. 2 fuel oil is recovered

    DOE Patents [OSTI]

    Bauman, Richard F.; Ryan, Daniel F.

    1982-01-01

    An improved process for the liquefaction of coal and similar solid carbonaceous materials wherein a hydrogen donor solvent or diluent derived from the solid carbonaceous material is used to form a slurry of the solid carbonaceous material and wherein the naphthenic components from the solvent or diluent fraction are separated and used as jet fuel components. The extraction increases the relative concentration of hydroaromatic (hydrogen donor) components and as a result reduces the gas yield during liquefaction and decreases hydrogen consumption during said liquefaction. The hydrogenation severity can be controlled to increase the yield of naphthenic components and hence the yield of jet fuel and in a preferred embodiment jet fuel yield is maximized while at the same time maintaining solvent balance.

  13. Evaluation of the 1998 Predictions of the Run-Timing of Wild Migrant Yearling Chinook and Water Quality at Multiple Locations on the Snake and Columbia Rivers using CRiSP/RealTime, 1998 Technical Report.

    SciTech Connect (OSTI)

    Beer, W. Nicholas; Hayes, Joshua A.; Shaw, Pamela

    1999-07-21

    Since 1988, wild salmon have been PIT-tagged through monitoring and research programs conducted by the Columbia River fisheries agencies and Tribes. Workers at the University of Washington have used detection data at Lower Granite Dam to generate predictions of arrival distributions for various stocks at the dam. The prediction tool is known as RealTime. In 1996, RealTime predictions were linked to a downstream migration model, CRiSP.1. The composite model, known as CRiSP/RealTime, predicts the arrival distribution and fraction transported at downriver locations.

  14. High-quality permanent draft genome sequence of Bradyrhizobium sp. Ai1a-2; a microsymbiont of Andira inermis discovered in Costa Rica

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tian, Rui; Parker, Matthew; Seshadri, Rekha; Reddy, T. B. K.; Markowitz, Victor; Ivanova, Natalia; Pati, Amrita; Woyke, Tanja; Baeshen, Mohammed; Baeshen, Nabih; et al

    2015-06-14

    Bradyrhizobium sp. Ai1a-2 is is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective nitrogen fixing root nodule of Andira inermis collected from Tres Piedras in Costa Rica. In this report we describe, for the first time, the genome sequence information and annotation of this legume microsymbiont. The 9,029,266 bp genome has a GC content of 62.56% with 247 contigs arranged into 246 scaffolds. The assembled genome contains 8,482 protein-coding genes and 102 RNA-only encoding genes. Lastly, this rhizobial genome was sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Rootmore » Nodule Bacteria (GEBA-RNB) project proposal.« less

  15. Structure of a highly acidic β-lactamase from the moderate halophile Chromohalobacter sp. 560 and the discovery of a Cs{sup +}-selective binding site

    SciTech Connect (OSTI)

    Arai, Shigeki; Yonezawa, Yasushi; Okazaki, Nobuo; Matsumoto, Fumiko; Shibazaki, Chie; Shimizu, Rumi; Yamada, Mitsugu; Adachi, Motoyasu; Tamada, Taro; Kawamoto, Masahide; Tokunaga, Hiroko; Ishibashi, Matsujiro; Blaber, Michael; Tokunaga, Masao; Kuroki, Ryota

    2015-03-01

    The tertiary structure of a β-lactamase derived from the halobacterium Chromohalobacter sp. 560 (HaBLA) was determined by X-ray crystallography. Three unique Sr{sup 2+}-binding sites and one Cs{sup +}-binding site were discovered in the HaBLA molecule. Environmentally friendly absorbents are needed for Sr{sup 2+} and Cs{sup +}, as the removal of the radioactive Sr{sup 2+} and Cs{sup +} that has leaked from the Fukushima Nuclear Power Plant is one of the most important problems in Japan. Halophilic proteins are known to have many acidic residues on their surface that can provide specific binding sites for metal ions such as Cs{sup +} or Sr{sup 2+}. The crystal structure of a halophilic β-lactamase from Chromohalobacter sp. 560 (HaBLA) was determined to resolutions of between 1.8 and 2.9 Å in space group P3{sub 1} using X-ray crystallography. Moreover, the locations of bound Sr{sup 2+} and Cs{sup +} ions were identified by anomalous X-ray diffraction. The location of one Cs{sup +}-specific binding site was identified in HaBLA even in the presence of a ninefold molar excess of Na{sup +} (90 mM Na{sup +}/10 mM Cs{sup +}). From an activity assay using isothermal titration calorimetry, the bound Sr{sup 2+} and Cs{sup +} ions do not significantly affect the enzymatic function of HaBLA. The observation of a selective and high-affinity Cs{sup +}-binding site provides important information that is useful for the design of artificial Cs{sup +}-binding sites that may be useful in the bioremediation of radioactive isotopes.

  16. Fibroblast growth factor-2 up-regulates the expression of nestin through the RasRafERKSp1 signaling axis in C6 glioma cells

    SciTech Connect (OSTI)

    Chang, Kai-Wei; Huang, Yuan-Li; Wong, Zong-Ruei; Su, Peng-Han; Huang, Bu-Miin; Ju, Tsai-Kai; Technology Commons, College of Life Science, National Taiwan University, Taipei 106, Taiwan ; Yang, Hsi-Yuan

    2013-05-17

    Highlights: Nestin expression in C6 glioma cells is induced by FGF-2. Nestin expression is induced by FGF-2 via de novo RNA and protein synthesis. The FGFR inhibitor SU5402 blocks the FGF-2-induced nestin expression. The mRNA of FGFR1 and 3 are detected in C6 glioma cells. RasRafERKSp1 signaling pathway is responsibe for FGF-2-induced nestin expression. -- Abstract: Nestin is a 240-kDa intermediate filament protein expressed mainly in neural and myogenic stem cells. Although a substantial number of studies have focused on the expression of nestin during development of the central nervous system, little is known about the factors that induce and regulate its expression. Fibroblast growth factor-2 (FGF-2) is an effective mitogen and stimulates the proliferation and differentiation of a subset of nestin-expressing cells, including neural progenitor cells, glial precursor cells, and smooth muscle cells. To assess whether FGF-2 is a potent factor that induces the expression of nestin, C6 glioma cells were used. The results showed that nestin expression was up-regulated by FGF-2 via de novo RNA and protein synthesis. Our RT-PCR results showed that C6 glioma cells express FGFR1/3, and FGFRs is required for FGF-2-induced nestin expression. Further signaling analysis also revealed that FGF-2-induced nestin expression is mediated through FGFRMAPKERK signaling axis and the transcriptional factor Sp1. These findings provide new insight into the regulation of nestin in glial system and enable the further studies on the function of nestin in glial cells.

  17. Draft Genome Sequence of Pseudoalteromonas sp. Strain ND6B, an Oil-Degrading Isolate from Eastern Mediterranean Sea Water Collected at a Depth of 1,210 Meters

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Harris, Austin P.; Techtmann, Stephen M.; Stelling, Savannah C.; Utturkar, Sagar M.; Alshibli, Noor K.; Brown, Steven D.; Hazen, Terry C.

    2014-11-26

    We report the draft genome of Pseudoalteromonas sp. strain ND6B, which is able to grow with crude oil as a carbon source. Strain ND6B was isolated from eastern Mediterranean Sea deep water at a depth of 1,210 m. The genome of strain ND6B provides insight into the oil-degrading ability of the Pseudoalteromonas species.

  18. Enhancing photo-catalytic production of organic acids in the cyanobacterium S ynechocystis sp. PCC 6803 Δ glg C , a strain incapable of glycogen storage

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Carrieri, Damian; Broadbent, Charlie; Carruth, David; Paddock, Troy; Ungerer, Justin; Maness, Pin-Ching; Ghirardi, Maria; Yu, Jianping

    2015-01-23

    We describe how a key objective in microbial biofuels strain development is to maximize carbon flux to target products while minimizing cell biomass accumulation, such that ideally the algae and bacteria would operate in a photo-catalytic state. A brief period of such a physiological state has recently been demonstrated in the cyanobacterium Synechocystis sp. PCC 6803 ΔglgC strain incapable of glycogen storage. When deprived of nitrogen, the ΔglgC excretes the organic acids alpha-ketoglutarate and pyruvate for a number of days without increasing cell biomass. This study examines the relationship between the growth state and the photo-catalytic state, and characterizes themore » metabolic adaptability of the photo-catalytic state to increasing light intensity. It is found that the culture can transition naturally from the growth state into the photo-catalytic state when provided with limited nitrogen supply during the growth phase. Photosynthetic capacity and pigments are lost over time in the photo-catalytic state. Reversal to growth state is observed with re-addition of nitrogen nutrient, accompanied by restoration of photosynthetic capacity and pigment levels in the cells. While the overall productivity increased under high light conditions, the ratio of alpha-ketoglutarate/pyruvate is altered, suggesting that carbon partition between the two products is adaptable to environmental conditions.« less

  19. The Dark Side of Algae Cultivation. Characterizing night biomass loss in three photosynthetic algae, Chlorella sorokiniana, Nannochloropsis salina and Picochlorum sp

    SciTech Connect (OSTI)

    Edmundson, Scott J.; Huesemann, Michael H.

    2015-10-28

    Night biomass loss in photosynthetic algae is an essential parameter that is often overlooked when modeling or optimizing biomass productivities. Night respiration acts as a tax on daily biomass gains and has not been well characterized in the context of biofuel production. We examined the night biomass loss in three algae strains that may have potential for commercial biomass production (Nannochloropsis salina- CCMP1776, Chlorella sorokiniana- DOE1412, and Picochlorum sp. LANL-WT). Biomass losses were monitored by ash free dry weight (AFDW mg/L-1) and optical density (OD750) on a thermal-gradient incubator. Night biomass loss rates were highly variable (ranging from -0.006 to -0.59 day -1), species-specific, and dependent on both culture growth phase prior to the dark period and night pond temperature. In general, the fraction of biomass lost over a 10 hour dark period, which ranged from ca. 1 to 22% in our experiments, was positively correlated with temperature and declined as the culture transitioned from exponential to linear to stationary phase. The dynamics of biomass loss should be taken into consideration in algae strain selection, are critical in predictive modeling of biomass production based on geographic location and can influence the net productivity of photosynthetic cultures used for bio-based fuels or products.

  20. Multi-omic dynamics associate oxygenic photosynthesis with nitrogenase-mediated H2 production in Cyanothece sp. ATCC 51142

    SciTech Connect (OSTI)

    Bernstein, Hans C.; Charania, Moiz A.; McClure, Ryan S.; Sadler, Natalie C.; Melnicki, Matthew R.; Hill, Eric A.; Markillie, Lye Meng; Nicora, Carrie D.; Wright, Aaron T.; Romine, Margaret F.; Beliaev, Alexander S.

    2015-11-03

    This study combines transcriptomic and proteomic profiling to provide new insights on the metabolic relationship between oxygenic photosynthesis and nitrogenase-mediated H2 production in the model cyanobacterium, Cyanothece sp. ATCC 51142. To date, the proposed mechanisms used to describe the energy metabolism processes that support H2 production in Cyanothece 51142 have assumed that ATP and reductant requirements are derived solely from glycogen oxidation and/or cyclic-electron flow around photosystem I. The results from this study present and test an alternative hypothesis by showing that net-positive rates of oxygenic photosynthesis and increased expression of photosystem II reaction centers correspond and are synchronized with nitrogenase expression and H2 production. These findings provide a new and more complete view on the metabolic processes contributing to the energy budget of photosynthetic H2 production and highlight the likely role of photocatalytic H2O oxidation as a major participating process.

  1. Growth of Chlamydomonas reinhardtii in acetate-free medium when co-cultured with alginate-encapsulated, acetate-producing strains of Synechococcus sp. PCC 7002

    SciTech Connect (OSTI)

    Therien, Jesse B.; Zadvornyy, Oleg A.; Posewitz, Matthew C.; Bryant, Donald A.; Peters, John W.

    2014-10-18

    The model alga Chlamydomonas reinhardtii requires acetate as a co-substrate for optimal production of lipids, and the addition of acetate to culture media has practical and economic implications for algal biofuel production. We demonstrate the growth of C. reinhardtii on acetate provided by mutant strains of the cyanobacterium Synechococcus sp. PCC7002.

  2. Kallotenue papyrolyticum gen. nov., sp. nov., a cellulolytic and filamentous thermophile that represents a novel lineage (Kallotenuales ord. nov., Kallotenuaceae fam. nov.) within the class Chloroflexia

    SciTech Connect (OSTI)

    Cole, Jesse; Gieler, Brandon; Heisler, Devon; Palisoc, Maryknoll; Williams, Amanda; Dohnalkova, Alice; Ming, Hong; Yu, Tian T.; Dodsworth, Jeremy A.; Li, Wen J.; Hedlund, Brian P.

    2013-08-15

    Several closely-related, thermophilic, and cellulolytic bacterial strains, designated JKG1T, JKG2, JKG3, JKG4, and JKG5, were isolated from a cellulolytic enrichment (corn stover) incubated in the water column of Great Boiling Spring, NV. Strain JKG1T had cells of a diameter of 0.7 - 0.9 ?m and length of ~2.0 ?m that formed non-branched multicellular filaments reaching >300 ?m. Spores were not formed and dense liquid cultures were red. The temperature range for growth was 45-65 C, with an optimum of 55 C. The pH range for growth was 5.6-9.0, with an optimum of 7.5. JKG1T grew as an aerobic heterotroph, utilizing glucose, sucrose, xylose, arabinose, cellobiose, carboxymethylcellulose, filter paper, microcrystalline cellulose, xylan, starch, casamino acids, tryptone, peptone, yeast extract, acetate, citrate, lactate, pyruvate, and glycerol as sole carbon sources, and was not observed to photosynthesize. The cells stained Gram-negative. Phylogenetic analysis using 16S rRNA gene sequences placed the new isolates in the class Chloroflexia, but distant from other cultivated members, with the highest sequence identity of 82.5% to Roseiflexus castenholzii. The major quinone was menaquinone-9; no ubiquinones were detected. The major cellular fatty acids (>5%) were C18:0, anteiso-C17:0, iso-C18:0, and iso-C17:0. C16:0, iso-C16:0, and C17:0. The peptidoglycan amino acids were alanine, ornithine, glutamic acid, serine, and asparagine. Whole-cell sugars included mannose, rhamnose, glucose, galactose, ribose, arabinose, and xylose. Morphological, phylogenetic, and chemotaxonomic results suggest that JKG1T is representative of a new lineage within the class Chloroflexia, which we propose to designate Kallotenue papyrolyticum gen. nov., sp. nov., Kallotenuaceae fam. nov., Kallotenuales ord. nov.

  3. Fig. 20.1.sp

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  4. Fig. 20.2.sp

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  5. Fig. 20.3.sp

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  6. Fig. 20.5.sp

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  7. Titan_SP-1.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tips For Getting Hired Tips For Getting Hired Successful candidates know it takes a little extra effort to get to the top. This one hour workshop introduces you to the Department of Energy, in addition to guiding you in creating a competitive Federal resume, it also covers veteran hiring options, and offers important tips to help prepare for the interview. So, If you are new to the Federal government hiring process or just want to improve your odds of getting that critical interview, this

  8. Accumulation of Pb and Cu heavy metals in sea water, sediment, and leaf and root tissue of Enhalus sp. in the seagrass bed of Banten Bay

    SciTech Connect (OSTI)

    Fauziah, Faiza Choesin, Devi N.

    2014-03-24

    Banten Bay in Indonesia is a coastal area which has been highly affected by human activity. Previous studies have reported the presence of lead (Pb) and copper (Cu) heavy metals in the seawater of this area. This study was conducted to measure the accumulation of Pb and Cu in seawater, sediment, leaf tissue, and root tissue of the seagrass species Enhalus sp. Sampling was conducted at two observation stations in Banten Bay: Station 1 (St.1) was located closer to the coastline and to industrial plants as source of pollution, while Station 2 (St.2) was located farther away offshore. At each station, three sampling points were established by random sampling. Field sampling was conducted at two different dates, i.e., on 29 May 2012 and 30 June 2012. Samples were processed by wet ashing using concentrated HNO{sub 3} acid and measured using Atomic Absorption Spectrometry (AAS). Accumulation of Pb was only detected in sediment samples in St.1, while Cu was detected in all samples. Average concentrations of Cu in May were as follows: sediment St.1 = 0.731 ppm, sediment St.2 = 0.383 ppm, seawater St.1 = 0.163 ppm, seawater St.2 = 0.174 ppm, leaf St.1 = 0.102 ppm, leaf St.2 = 0.132 ppm, root St.1= 0.139 ppm, and root St.2 = 0.075 ppm. Average measurements of Cu in June were: sediment St.1 = 0.260 ppm, leaf St.1 = 0.335 ppm, leaf St.2 = 0.301 ppm, root St.1= 0.047 ppm, and root St.2 = 0.060 ppm. In June, Cu was undetected in St.2 sediment and seawater at both stations. In May, Cu concentration in seawater exceeded the maximum allowable threshold for water as determined by the Ministry of the Environment. Spatial and temporal variation in Pb and Cu accumulation were most probably affected by distance from source and physical conditions of the environment (e.g., water current and mixing)

  9. Cis-Chlorobenzene dihydrodiol dehydrogenase (TcbB) from Pseudomonas sp. strain P51, expressed in Escherichia coli DH5{alpha}(pTCB149), catalyzes enantioselective dehydrogenase reactions

    SciTech Connect (OSTI)

    Raschke, H.; Fleischmann, T.; Meer, J.R. van der; Kohler, H.P.E.

    1999-12-01

    cis-Chlorobenzene dihydrodiol dehydrogenase (CDD) from Pseudomonas sp. strain P51, cloned into Escherichia coli DH5{alpha}(pTCB149) was able to oxidize cis-dihydrodihydroxy derivatives (cis-dihydrodiols) of dihydronaphthalene, indene, and four para-substituted toluenes to the corresponding catechols. During the incubation of a nonracemic mixture of cis-1,2-indandiol, only the (+)-cis-(1R,2S) enantiomer was oxidized; the (-)-cis-(S,2R) enantiomer remained unchanged, CDD oxidized both enantiomers of cis-1,2-dihydroxy-1,2,3,4-tetrahydronaphthalene, but oxidation of the (+)-cis-(1S,2R) enantiomer was delayed until the (-)-cis-(1R,2S) enantiomer was completely depleted. When incubated with nonracemic mixtures of para-substituted cis-toluene dihydrodiols, CDD always oxidized the major enantiomer at a higher rate than the minor enantiomer. When incubated with racemic 1-indanol, CDD enantioselectively transformed the (+)-(1S) enatiomer to 1-indanone. This stereoselective transformation shows that CDD also acted as an alcohol dehydrogenase. Additionally, CDD was able to oxidize (+)-cis-(1R,2S)-dihydroxy-1,2-dihydronaphthalene, (+)-cis-monochlorobiphenyl dihydrodiols, and (+)-cis-toluene dihydrodiol to the corresponding catechols.

  10. Thermoflexus hugenholtzii gen. nov., sp. nov., a thermophilic, microaerophilic, filamentous bacterium representing a novel class in the Chloroflexi, Thermoflexia classis nov., and description of Thermoflexaceae fam. nov. and Thermoflexales ord. nov.

    SciTech Connect (OSTI)

    Dodsworth, Jeremy A.; Gevorkian, Jonathan; Despujos, Fairuz; Cole, Jesse; Murugapiran, Senthil K.; Ming, Hong; Li, Wen J.; Zhang, Gengxin; Dohnalkova, Alice; Hedlund, Brian P.

    2014-06-06

    A thermophilic, filamentous, heterotrophic bacterium designated strain JAD2T was isolated from sediment of Great Boiling Spring in Nevada, USA. Cells had an average diameter of 0.3 m and length of 4.0 m, and formed filaments typically ranging in length from 20 m to 200 m. Filaments were negative for the Gram stain reaction, spores were not formed, and motility was not observed. The optimum temperature for growth was 75 C with a range from 67.5-75 C, and the optimum pH for growth was 6.75 with a range from 6.5-7.75. Peptone, tryptone or yeast extract were able to support growth when supplemented with a vitamin solution, but no growth was observed using a variety of defined organic substrates. Strain JAD2T was a facultative microaerophile, with optimal growth at 1% v/v O2 and an upper limit of 8% O2, and anaerobic growth was stimulated by fumarate but inhibited by sulfite and elemental sulfur. The major cellular fatty acids (>5%) were C16:0, C19:0, C18:0, C20:0, and C19:1. The genomic DNA G+C content was 69.3%. Phylogenetic and phylogenomic analyses using 16S rRNA gene sequences and other conserved genes placed JAD2T and other members of the yet-uncultivated GAL35 group within the phylum Chloroflexi, but not within any existing class in this phylum. These results indicate that strain JAD2T is the first cultivated representative of a new lineage within the phylum Chloroflexi, for which we propose the name Thermoflexus hugenholtzii gen. nov., sp. nov., type strain JAD2T, within Thermoflexia classis nov., Thermoflexales ord. nov., and Thermoflexaceae fam. nov.

  11. IMAT SpA | Open Energy Information

    Open Energy Info (EERE)

    33074 Sector: Renewable Energy, Solar Product: Italy-based company specializing in manufacturing of components for household refrigeration. Their main renewable energy focus is...

  12. Microsoft Word - 2012_sp_04.docx

    U.S. Energy Information Administration (EIA) Indexed Site

    ... For example, even though the population of the East North Central Census region increased from 41 million to 46 million between 1975 (the start of the STEO database) and 2011, that ...

  13. Sorgenia SpA | Open Energy Information

    Open Energy Info (EERE)

    Services Product: Sorgenia produces electricity from both renewable energy sources and natural gas. It also buys and sells electricity and gas in the market and provides energy...

  14. Microsoft Word - 2011_sp_02.docx

    Gasoline and Diesel Fuel Update (EIA)

    Independent Statistics & Analysis U.S. Energy Information Administration June 2011 Short-Term Energy Outlook Supplement: 2011 Outlook for Hurricane-Related Production Outages in the Gulf of Mexico Highlights  The National Oceanic and Atmospheric Administration's (NOAA) Atlantic Hurricane Season Outlook, released on May 19, 2011, predicts that the Atlantic basin likely will experience above-normal tropical weather activity during this year's hurricane season (June 1 - November 30). 1 NOAA

  15. Microsoft Word - 2012_sp_02.docx

    Gasoline and Diesel Fuel Update (EIA)

    Brent Crude Oil Spot Price Forecast 1 July 10, 2012 Short-Term Energy Outlook Supplement: Brent Crude Oil Spot Price Forecast Since the mid-1980s, benchmark crude oil prices such as West Texas Intermediate (WTI) in the United States and Brent crude oil in Europe have served as reference points that the market uses for pricing other crude oils. The historically close relationships between the major benchmarks made WTI prices a reliable indicator of the average cost of crude oil to U.S. refiners,

  16. Microsoft Word - 2013_sp_02.docx

    Gasoline and Diesel Fuel Update (EIA)

    Change in Regional and U.S. Degree-Day Calculations 1 September 11, 2012 Short-Term Energy Outlook Supplement: Change in Regional and U.S. Degree-Day Calculations Average daily temperatures during the summer and winter months, reported as population- weighted cooling degree days (CDDs) and heating degree days (HDDs), respectively, are important in explaining and forecasting the consumption of energy for space cooling and heating in the U.S. Energy Information Administration's Short-Term Energy

  17. Microsoft Word - 2011_sp_01.docx

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Notice - June 2011 Independent Statistics & Analysis U.S. Energy Information Administration June 2011 Short-Term Energy Outlook Notice: Suspension of Regional Residential Heating ...

  18. Microsoft Word - 2013_sp_05.docx

    U.S. Energy Information Administration (EIA) Indexed Site

    Estimates of Crude Oil and Liquid Fuels Supply Disruptions 1 September 10, 2013 Short-Term Energy Outlook Supplement: EIA Estimates of Crude Oil and Liquid Fuels Supply Disruptions 1 Unplanned crude oil and liquid fuels supply disruptions may occur frequently in many countries and for a variety of reasons, including conflicts, natural disasters, and technical difficulties. Although crude oil and liquid fuels supply disruptions may occur at any time, recent outages have particularly unsettled the

  19. Alternative Fuels and Advanced Vehicle Data Center Creates New Tool to

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ASTM Biodiesel Specifications to someone by E-mail Share Alternative Fuels Data Center: ASTM Biodiesel Specifications on Facebook Tweet about Alternative Fuels Data Center: ASTM Biodiesel Specifications on Twitter Bookmark Alternative Fuels Data Center: ASTM Biodiesel Specifications on Google Bookmark Alternative Fuels Data Center: ASTM Biodiesel Specifications on Delicious Rank Alternative Fuels Data Center: ASTM Biodiesel Specifications on Digg Find More places to share Alternative Fuels Data

  20. Recent Research to Address Technical Barriers to Increased Use...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    832.91 KB) More Documents & Publications Biodiesel ASTM Update and Future Technical Needs Biodiesel Research Update Biodiesel Progress: ASTM Specifications and 2nd Generation ...

  1. METALLURGICAL EVALUATION OF CAST DUPLEX STAINLESS STEELS AND...

    Office of Scientific and Technical Information (OSTI)

    ... ASTM E562 (Standard Test Method for Determining Volume Fraction by Systematic manual Point Count) and ASTM A923 iii (Standard Test Methods for Detecting Detrimental Intermetallic ...

  2. The [NiFe]-hydrogenase of the cyanobacterium Synechocystis sp...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PCC 6803 works bidirectionally with a bias to H2 production Authors: McIntosh, C. L., ... can be easily monitored as current under rapidly changing experimental conditions. ...

  3. SP-100 Program: space reactor system and subsystem investigations

    SciTech Connect (OSTI)

    Harty, R.B.

    1983-09-30

    For a space reactor power system, a comprehensive safety program will be required to assure that no undue risk is present. This report summarizes the nuclear safety review/approval process that will be required for a space reactor system. The documentation requirements are presented along with a summary of the required contents of key documents. Finally, the aerospace safety program conducted for the SNAP-10A reactor system is summarized. The results of this program are presented to show the type of program that can be expected and to provide information that could be usable in future programs.

  4. FY 2016 SES and SP Opening Guidance Memo_0.pdf

    Office of Environmental Management (EM)

  5. Caloramator sp. Tolerance of Pretreatment Inhibitors from Lignocellulosics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Calling All Fuel Cells Calling All Fuel Cells December 7, 2012 - 4:31pm Addthis Altergy had more than 60 fuel cells in the immediate Hurricane Sandy disaster area that acted as backup power for cell phone towers. | Photo courtesy of Altergy. Altergy had more than 60 fuel cells in the immediate Hurricane Sandy disaster area that acted as backup power for cell phone towers. | Photo courtesy of Altergy. Sunita Satyapal Director, Fuel Cell Technologies Office What is a fuel cell? A fuel cell is a

  6. Solar Ventures SpA | Open Energy Information

    Open Energy Info (EERE)

    Zip: 20122 Sector: Solar Product: Solar PV project developer investor, focused on the Italian market and considering projects in Greece and France. References: Solar Ventures...

  7. sp3-hybridized framework structure of group-14 elements discovered...

    Office of Scientific and Technical Information (OSTI)

    with energy band gaps close to the optimal values for optoelectronic or photovoltaic applications. With metal-atom encapsulation, the P42mnm structure would also be a...

  8. Solution Package Scope Definition, Report 72, Salt Waste (SP #72)

    Broader source: Energy.gov [DOE]

    Supporting Technical Document for the Radiological Release Accident Investigation Report (Phase II Report)

  9. Microsoft Word - FY 2015 SP Performance Appraisal System Guidance...

    Broader source: Energy.gov (indexed) [DOE]

    Office of Executive Resources Office of the Chief Human Capital Officer U.S. Department of ... (5% - 10 %) o Acquires and administers human, financial, material, and information ...

  10. AHSS Stamping Project … A/SP 050; Nonlinear Strain Paths Project … A/SP 061

    Broader source: Energy.gov [DOE]

    2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation

  11. Recent Research to Address Technical Barriers to Increased Use of Biodiesel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy 832.91 KB) More Documents & Publications Biodiesel ASTM Update and Future Technical Needs Biodiesel Research Update Biodiesel Progress: ASTM Specifications and 2nd Generation Biodiesel

  12. FATIGUE DESIGN CURVES FOR

    Office of Scientific and Technical Information (OSTI)

    ... Some Aluminum Alloys," Low Cycle Fatigue, ASTM STP 942, H. D. Solomon, G. R. Halford, L. ... Weldments," Fatigue Testing of Weldments, ASTM STP 648, D. W. Hoeppner, Ed., American ...

  13. Seismic Capacity of Threaded, Brazed, and Grooved Pipe Joints

    Office of Environmental Management (EM)

    joints * 4 tests o Brazed (copper) * 4 tests Grooved Couplings o Catalog items o ASTM A106 Grade B piping o ASTM A 536 couplings o Lateral deflections imposed well above...

  14. Progress Energy Florida - Commercial Energy Efficiency Rebate...

    Broader source: Energy.gov (indexed) [DOE]

    greater than 0.70, and must be an Energy Star labeled roof product based on ASTM E-903 or ASTM C-1549 testing. Building envelope improvements like ceiling insulation,...

  15. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Biofuel Specifications Ethanol-blended gasoline must conform to ASTM D4814, E85 must conform to ASTM D4806, and biodiesel-blended fuel containing at least 6%, but no more than 20%, ...

  16. Vehicle Technologies Office Merit Review 2016: E. Coli Derived Spider Silk MaSp1 and MaSp2 Proteins as Carbon Fiber Precursors

    Broader source: Energy.gov [DOE]

    Presentation given by Utah State University at the 2016 DOE Vehicle Technologies Office and Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting about Lightweighting

  17. Nanomaterial Laboratory Safety, Boise State University | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A nanomaterial, as defined by The ASTM Committee on Nanotechnology, is a particle ... Safety Implementation Plan, Ames Laboratory Approaches to Safe Nanotechnology

  18. Text-Alternative Version of Building America Webinar: Ventilation...

    Energy Savers [EERE]

    ... He is an ASHRAE fellow and serves on standards and technical committees for ASHRAE, American Society of Testing and Materials (ASTM), Residential Energy Services Network (RESNET), ...

  19. Healthy Efficient Homes Research & Standards | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (LBNL) - Berkeley, CA Partners: -- ASHRAE -- ASTM- West Conshohocken, PA -- RESNET ... America Program Research-to-Market Plan ASHRAE Standard 62.2. Ventilation and Acceptable ...

  20. Developing the Next Generation of Gridded TMYs (Presentation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    o Outreach * Standards, expert committees, and collaborations o ASTM G03-radiometry o IEA Task 46 Solar Resource Assessment and Forecasting o Subcontracts and cooperative...

  1. Microsoft Word - CCP-PO-003-Revision 13

    Office of Environmental Management (EM)

    ... , cotton Conwed , paper, rags, rayon, wood) Cellulose acetate butyrate Cellulose ... Uranium Dioxide Powders and Pellets," ASTM C 696, American Society for ...

  2. Informal Report

    Office of Scientific and Technical Information (OSTI)

    ... which are attached resistance thermometers. ... and power measurement recording system. The ASTM C-177 method presents general ... applied to ensure contact of all surfaces. ...

  3. PSADEFS.CHP:Corel VENTURA

    Gasoline and Diesel Fuel Update (EIA)

    ASTM. The acronym for the American Society for Test- ing and Materials. Atmospheric Crude ... Example: (1) Unextracted paraffinic oils that would not meet the Viscosity Index test. ...

  4. TEMPERATURE COEFFICIENTS FOR PV MODULES AND ARRAYS: MEASUREMENT...

    Office of Scientific and Technical Information (OSTI)

    ASTM also specifies that temperature coefficients are determined using a standard solar ... fixture, illuminating the cell with a solar simulator, measuring the cell's ...

  5. TWC Meeting Transcribed Flipcharts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Questions for Follow Up 1. How to heat treat tanks modified in place to achieve ASTM certification? 2. Glass alternative - committeeagency (Issue Manager first) *...

  6. BicycleDraftPolicy.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    wear helmets that have been approved by the American Society for Testing and Materials (ASTM) or the United States Consumer Product Safety Commission (CPSC). * Bicyclists, like...

  7. FEM94

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    turbines. This case study was prepared for the American Society of Testing Material' s (ASTM) Standard Technical Publication (STP) on fatigue education. Using the LIFE2 code, the...

  8. DOE/ID-Number

    Energy Savers [EERE]

    ... 21, 2015 ACRONYMS ASME B&PVC American Society of Mechanical Engineers Boiler and Pressure Vessel Code ASTM American Society for Testing and Materials CISCC Chloride Induced ...

  9. Biodiesel Research Update | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research Update Biodiesel Research Update 2004 Diesel Engine Emissions Reduction (DEER) ... Recent Research to Address Technical Barriers to Increased Use of Biodiesel Biodiesel ASTM ...

  10. Renewable Diesel | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Renewable Diesel Fuels: Status of Technology and R&D Needs Biodiesel Progress: ASTM Specifications and 2nd Generation Biodiesel Recent Research to Address Technical Barriers to ...

  11. ITP Metal Casting: Corrosion Testing Practices … High Alloy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Various ASTM documents describe laboratory test methods for determining the relative pitting, crevice, and intergranular corrosion resistance of engineering alloys. These test ...

  12. DOE-HDBK-1169-2003; DOE Handbook Nuclear Air Cleaning Handbook

    Office of Environmental Management (EM)

    ... Fire Stops, ASTM Standard E-814, West Conshohocken, PA. 28. NFPA (National Fire Protection Association), 1999, Fire Doors and Windows, NFPA 80, Quincy, MA. 29. NFPA (National ...

  13. November 6, 2008; HSS/Union Working Group Meeting on Aging Workforce...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... shootingservice restoration procedures 1993 - 2001 - Employed by the International ... * Coordinating NESC, ASTM, IEEE, ANSI, NFPA and other code work activity for Utility ...

  14. AHTR Single Slide

    Office of Environmental Management (EM)

    ... Chinese TMSR Program ASME, ASTM, and ANS Standards IRP Projects LWR Accident Tolerant Fuels NEUP Projects TRISO Fuel Testing Advanced Alloy Design International MSR ...

  15. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... States) USDOE Office of Management and Administration ... A widely used solar reflectance metric based on the ASTM ... exaggerate the economic value N of annual cool-roof net ...

  16. Hydrogen Pipeline Discussion

    Broader source: Energy.gov [DOE]

    ASTM T.G. G1.06.08 Goals and Workshop, May 17, 2005. Formed on November 11, 2004. Identify major laboratory facilities and capabilities.

  17. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Biltmore) May 8: ASTM International subcommittee E44.09 Photovoltaic Electric Power Conversion (EPRI Headquarters) 3 Grid Integration Challenge 4 Cost Penetration Level ...

  18. Lowering Drilling Cost, Improving Operational Safety, and Reducing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a splitting tensile strength method. This method is similar to ASTM C496-90 (standard test method for splitting tensile strength of cylindrical concrete specimens). For this...

  19. X:\\Data_Publication\\Pma\\current\\ventura\\pma00.vp

    U.S. Energy Information Administration (EIA) Indexed Site

    gravity of 22 degrees or below. Intermediate crudes fall in the range of 22 degrees to 38 degrees API gravity. ASTM: American Society for Testing and Materials. Aviation...

  20. X:\\L6046\\Data_Publication\\Pma\\current\\ventura\\pma.vp

    U.S. Energy Information Administration (EIA) Indexed Site

    gravity of 22 degrees or below. Intermediate crudes fall in the range of 22 degrees to 38 degrees API gravity. ASTM: American Society for Testing and Materials. Aviation...

  1. Glossary API Gravity: An

    U.S. Energy Information Administration (EIA) Indexed Site

    gravity of 22 degrees or below. Intermediate crudes fall in the range of 22 degrees to 38 degrees API gravity. ASTM: American Society for Testing and Materials. Aviation...

  2. Organization and Functions

    Office of Environmental Management (EM)

    Support * ANSI * ASME ASTM * DHS * DOD FEMA * FMCSA * FRA * IAEA * ICAO * IMO * ... DHS Department of Homeland Security DOD Department of Defense DOECAP Department of ...

  3. Carbonaceous Aerosols and Radiative Effects Study (CARES), g1-aircraft, sedlacek sp2

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Sedlacek, Art

    The primary objective of the Carbonaceous Aerosol and Radiative Effects Study (CARES) in 2010 was to investigate the evolution of carbonaceous aerosols of different types and their optical and hygroscopic properties in central California, with a focus on the Sacramento urban plume.

  4. DOE ARM SP2 Deployment at Boston College_Aerodyne led Coated...

    Office of Scientific and Technical Information (OSTI)

    ... UC Davis: Chris Cappa and Taylor Helgestad Instrumentation: Photo-acoustic Spectrometer ... Onasch, Andrew Freedman, Leah Williams, Taylor Helgestad, Christopher Cappa, Al Fischer, ...

  5. Carbonaceous Aerosols and Radiative Effects Study (CARES), g1-aircraft, sedlacek sp2

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Sedlacek, Art

    2011-08-30

    The primary objective of the Carbonaceous Aerosol and Radiative Effects Study (CARES) in 2010 was to investigate the evolution of carbonaceous aerosols of different types and their optical and hygroscopic properties in central California, with a focus on the Sacramento urban plume.

  6. Treatment Facility D Krauter, P.W.; Harrar, J.E.; Orloff, S.P...

    Office of Scientific and Technical Information (OSTI)

    Lab., CA (United States) USDOE Assistant Secretary for Environment, Safety, and Health, Washington, DC (United States) United States 1998-01-01 English Technical Report...

  7. FY15 SES SP Performance Appraisal Cycle_Memo to Heads of Departmental _0.pdf

    Office of Environmental Management (EM)

    FY 2016-2018 Action Agenda Framework Webinar FY 2016-2018 Action Agenda Framework Webinar Learn about the EJ IWG's Draft Action Agenda Framework. The Framework advances greater Federal agency collaboration to support holistic community-based solutions to address environmental justice issues in environmental protection, housing, transportation, economic development, energy policy, natural and cultural resources management and health disparities. FY 2016-2018 Action Agenda Framework Webinar

  8. Biofuels from Microalgae: Review of Products, Processes and Potential, with Special Focus on Dunaliella sp.

    SciTech Connect (OSTI)

    Huesemann, Michael H.; Benemann, John R.

    2009-12-31

    There is currently great interest in using microalgae for the production of biofuels, mainly due to the fact that microalgae can produce biofuels at a much higher productivity than conventional plants and that they can be cultivated using water, in particular seawater, and land not competing for resources with conventional agriculture. However, at present such microalgae-based technologies are not yet developed and the economics of such processes are uncertain. We review power generation by direct combustion, production of hydrogen and other fuel gases and liquids by gasification and pyrolysis, methane generation by anaerobic digestion, ethanol fermentations, and hydrogen production by dark and light-driven metabolism. We in particular discuss the production of lipids, vegetable oils and hydrocarbons, which could be converted to biodiesel. Direct combustion for power generation has two major disadvantages in that the high N-content of algal biomass causes unacceptably high NOx emissions and losses of nitrogen fertilizer. Thus, the use of sun-dried microalgal biomass would not be cost-competitive with other solid fuels such as coal and wood. Thermochemical conversion processes such as gasification and pyrolysis have been successfully demonstrated in the laboratory but will be difficult to scale up commercially and suffers from similar, though sometimes not as stringent, limitations as combustion. Anaerobic digestion of microalgal cells yields only about 0.3 L methane per g volatile solids destroyed, about half of the maximum achievable, but yields can be increased by adding carbon rich substrates to circumvent ammonia toxicity caused by the N-rich algal biomass. Anaerobic digestion would be best suited for the treatment of algal biomass waste after value-added products have been separated. Algae can also be grown to accumulate starches or similar fermentable products, and ethanol or similar (e.g., butanol) fermentations could be applied to such biomass, but research is required on increasing solvent yields. Dark fermentation of algal biomass can also produce hydrogen, but, as for other fermentations, only at low yields. Hydrogen can also be generated by algae in the light, however, this process has not yet been demonstrated in any way that could be scaled up and, in any event, Dunaliella, is not known to produce hydrogen. In response to nutrient deficiency (nitrogen or silicon), some microalgae accumulate neutral lipids which, after physical extraction, could be converted, via transesterification with methanol, to biodiesel. Nitrogen-limitation does not appear to increase either cellular lipid content or lipid productivity in Dunaliella. Results from life cycle energy analyses indicate that cultivation of microalgal biomass in open raceway ponds has a positive energy output ratio (EOR), approaching up to 10 (i.e., the caloric energy output from the algae is 10 times greater than the fossil energy inputs), but EOR are less than 1 for biomass grown in engineered photobioreactors. Thus, from both an energetic as well as economic perspective, only open ponds systems can be considered. Significant long-term R&D will be required to make microalgal biofuels processes economically competitive. Specifically, future research should focus on (a) the improvement of biomass productivities (i.e., maximizing solar conversion efficiencies), (b) the selection and isolation of algal strains that can be mass cultured and maintained stably for long periods, (c) the production of algal biomass with a high content of lipids, carbohydrates, and co-products, at high productivity, (d) the low cost harvesting of the biomass, and (e) the extraction and conversion processes to actually derive the biofuels. For Dunaliella specifically, the highest potential is in the co-production of biofuels with high-value animal feeds based on their carotenoid content.

  9. Microsoft Word - BL SP3 Table 11-03 v19 - final1.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    upgrade activities and radiation shielding requirements BEAM LINE ID (Scientific Disciplines) EXPERIMENTAL STATION TYPE (EnergyWave Length Range) TECHNIQUES CAPABILITIES (Sci...

  10. Process for producing ethanol from plant biomass using the fungus Paecilomyces sp

    DOE Patents [OSTI]

    Wu, J.F.

    1985-08-08

    A process for producing ethanol from plant biomass is disclosed. The process includes forming a substrate from the biomass with the substrate including hydrolysates of cellulose and hemicellulose. A species of the fungus Paecilomyces which has the ability to ferment both cellobiose and xylose to ethanol is then selected and isolated. The substrate is inoculated with this fungus, and the inoculated substrate is then fermented under conditions favorable for cell viability and conversion of hydrolysates to ethanol. Finally, ethanol is recovered from the fermented substrate. 5 figs., 3 tabs.

  11. Dynamic proteome analysis of Cyanothece sp. ATCC 51142 under constant light

    SciTech Connect (OSTI)

    Aryal, Uma K.; Stockel, Jana; Welsh, Eric A.; Gritsenko, Marina A.; Nicora, Carrie D.; Koppenaal, David W.; Smith, Richard D.; Pakrasi, Himadri B.; Jacobs, Jon M.

    2012-02-03

    Understanding the dynamic nature of protein abundances provides insights into protein turnover not readily apparent from conventional, static mass spectrometry measurements. This level of data is particularly informative when surveying protein abundances in biological systems subjected to large perturbations or alterations in environment such as cyanobacteria. Our current analysis expands upon conventional proteomic approaches in cyanobacteria by measuring dynamic changes of the proteome using a 13C15N-L-leucine metabolic labeling in Cyanothece ATCC51142. Metabolically labeled Cyanothece ATCC51142 cells grown under nitrogen sufficient conditions in continuous light were monitored longitudinally for isotope incorporation over a 48 h period, revealing 422 proteins with dynamic changes in abundances. In particular, proteins involved in carbon fixation, pentose phosphate pathway, cellular protection, redox regulation, protein folding, assembly and degradation showed higher levels of isotope incorporation suggesting that these biochemical pathways are important for growth under non-diazotrophic conditions. Calculation of relative isotope abundances (RIA) values allowed to measure actual active protein synthesis over time for different biochemical pathways under non-diazotrophic conditions. Overall results demonstrated the utility of 'non-steady state' pulsed metabolic labeling for systems-wide dynamic quantification of the proteome in Cyanothece ATCC51142 that can also be applied to other cyanobacteria.

  12. AHSS Stamping Project … A/SP 050; Nonlinear Strain Paths Project...

    Broader source: Energy.gov (indexed) [DOE]

    KB) More Documents & Publications Nonlinear Strain Paths Advanced High-Strength Steel Stamping Characterization of Thermo-Mechanical Behaviors of Advanced High Strength ...

  13. Assessment of Radioactive Liquid Effluents Release at IPEN-CNEN/SP

    SciTech Connect (OSTI)

    Bessa Nisti, Marcelo; Godoy dos Santos, Adir Janete

    2008-08-07

    A continuous effluent monitoring program has been established at IPEN's plant in order to allow an environmental impact assessment due to radioactive liquid effluent discharge to sanitary system. Representative samples of radioactive liquid effluents are analyzed by using high resolution gamma spectroscopy and instrumental neutron activation analysis, facing to Brazilian radioprotection regulatory rules. The results are consolidating yearly in the Institute source-term. In this paper, results of the source-term are presented, concerning to years 2004, 2005 and 2006. The total activity discharged was 8.5xl0{sup 8} Bq, 5.7x10{sup 8} Bq and 2.7xl0{sup 8} Bq, respectively. As the release is strongly dependent on the total amount of the effluent and on the dilution factor, special attention is needed in order to obtain the correct value of that last one. The estimated inside plant dilution factor, considering the recent facilities and the reshaping of the sewerage system was 80, 180 and 130, for period of 2004, 2005 and 2006 discharged liquid radioactive effluent.

  14. Smartgrid EV Communication module (SpEC) SAE DC Charging Digital...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DC fast charging enables rapid recharging of electric vehicles along heavy traffic corridors and at public stations. A DC fast charge can add 60 to 80 miles of range to an EV in ...

  15. System and method for introduction and stabilization of genes in Thermus sp.

    DOE Patents [OSTI]

    Kayser, Kevin J.; Park, Ho-Shin; Kilbane, II, John J.

    2005-03-01

    A method for introducing and stabilizing heterologous and recombinant genes in a thermophilic host in which a characteristic gene defining a detectable host characteristic is inactivated or deleted from the thermophilic host, resulting in a modified thermophilic host expressing an absence of the detectable host characteristic. A DNA fragment of interest is inserted into the modified thermophilic host together with an intact characteristic gene, whereby the detectable host characteristic is restored to the thermophilic host, thereby enabling detection and confirmation of successful transformation using plasmid vectors and integration of the DNA fragment into the chromosome of the thermophilic host.

  16. Process for producing ethanol from plant biomass using the fungus paecilomyces sp.

    DOE Patents [OSTI]

    Wu, Jung Fu

    1989-01-01

    A process for producing ethanol from plant biomass is disclosed. The process in cludes forming a substrate from the biomass with the substrate including hydrolysates of cellulose and hemicellulose. A species of the fungus Paecilomyces, which has the ability to ferment both cellobiose and xylose to ethanol, is then selected and isolated. The substrate is inoculated with this fungus, and the inoculated substrate is then fermented under conditions favorable for cell viability and conversion of hydrolysates to ethanol. Finally, ethanol is recovered from the fermented substrate.

  17. Final Report, Volume 2, The Development of Qualification Standards for Cast Duplex Stainless Steel

    SciTech Connect (OSTI)

    Russell, Steven, W.; Lundin, Carl, D.

    2005-09-30

    The scope of testing cast Duplex Stainless Steel (DSS) required testing to several ASTM specifications, while formulating and conducting industry round robin tests to verify and study the reproducibility of the results. ASTM E562 (Standard Test Method for Determining Volume Fraction by Systematic manual Point Count) and ASTM A923 (Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels) were the specifications utilized in conducting this work. An ASTM E562 industry round robin, ASTM A923 applicability study, ASTM A923 industry round robin, and an ASTM A923 study of the effectiveness of existing foundry solution annealing procedures for producing cast DSS without intermetallic phases were implemented. In the ASTM E562 study, 5 samples were extracted from various cast austenitic and DSS in order to have varying amounts of ferrite. Each sample was metallographically prepared by UT and sent to each of 8 participants for volume fraction of ferrite measurements. Volume fraction of ferrite was measured using manual point count per ASTM E562. FN was measured from the Feritescope{reg_sign} and converted to volume fraction of ferrite. Results indicate that ASTM E562 is applicable to DSS and the results have excellent lab-to-lab reproducibility. Also, volume fraction of ferrite conversions from the FN measured by the Feritescope{reg_sign} were similar to volume fraction of ferrite measured per ASTM E562. In the ASTM A923 applicability to cast DSS study, 8 different heat treatments were performed on 3 lots of ASTM A890-4A (CD3MN) castings and 1 lot of 2205 wrought DSS. The heat treatments were selected to produce a wide range of cooling rates and hold times in order to study the suitability of ASTM A923 to the response of varying amounts on intermetallic phases [117]. The test parameters were identical to those used to develop ASTM A923 for wrought DSS. Charpy V-notch impact samples were extracted from the

  18. Final Report, Volume 2, The Development of Qualification Standards for Cast Duplex Stainless Steel

    SciTech Connect (OSTI)

    Russell, Steven, W.; Lundin, Carl, W.

    2005-09-30

    The scope of testing cast Duplex Stainless Steel (DSS) required testing to several ASTM specifications, while formulating and conducting industry round robin tests to verify and study the reproducibility of the results. ASTM E562 (Standard Test Method for Determining Volume Fraction by Systematic manual Point Count) and ASTM A923 (Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels) were the specifications utilized in conducting this work. An ASTM E562 industry round robin, ASTM A923 applicability study, ASTM A923 industry round robin, and an ASTM A923 study of the effectiveness of existing foundry solution annealing procedures for producing cast DSS without intermetallic phases were implemented. In the ASTM E562 study, 5 samples were extracted from various cast austenitic and DSS in order to have varying amounts of ferrite. Each sample was metallographically prepared by UT and sent to each of 8 participants for volume fraction of ferrite measurements. Volume fraction of ferrite was measured using manual point count per ASTM E562. FN was measured from the Feritescope???????® and converted to volume fraction of ferrite. Results indicate that ASTM E562 is applicable to DSS and the results have excellent lab-to-lab reproducibility. Also, volume fraction of ferrite conversions from the FN measured by the Feritescope???????® were similar to volume fraction of ferrite measured per ASTM E562. In the ASTM A923 applicability to cast DSS study, 8 different heat treatments were performed on 3 lots of ASTM A890-4A (CD3MN) castings and 1 lot of 2205 wrought DSS. The heat treatments were selected to produce a wide range of cooling rates and hold times in order to study the suitability of ASTM A923 to the response of varying amounts on intermetallic phases [117]. The test parameters were identical to those used to develop ASTM A923 for wrought DSS. Charpy V-notch impact samples were extracted

  19. Complete genome sequence of Pelosinus sp. strain UFO1 assembled using single-molecule real-time DNA sequencing technology

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Brown, Steven D.; Utturkar, Sagar M.; Magnuson, Timothy S.; Ray, Allison E.; Poole, Farris L.; Lancaster, W. Andrew; Thorgersen, Michael P.; Adams, Michael W. W.; Elias, Dwayne A.

    2014-09-04

    Pelosinus fermentans strain R7 was isolated from Russian kaolin clays as the type strain and it can reduce Fe(III) during fermentative growth (1). Draft genome sequences for P. fermentans R7 and four strains from Hanford, Washington, USA, have been published (2–4). The P. fermentans 16S rRNA sequence dominated the lactate-based enrichment cultures from three geochemically contrasting soils from the Melton Branch Watershed, Oak Ridge, Tennessee, USA (5) and also at another stimulated, uraniumcontaminated field site near Oak Ridge (6). For the current work, strain UFO1 was isolated from pristine sediments at a background field site in Oak Ridge and characterizedmore » as facilitating U(VI) reduction and precipitation with phosphate (7).« less

  20. OO84O4c6sP HNF-SD-WM-II-740, Rev. OB

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Cadmium NR 2 8.2 7.3.1 Cerium A 8.8 5.5 Silver W? 8.93 7.3.2 Thorium A 25.6 7.3.3 ......... 7-16 7.3.3 Thorium......

  1. Enhanced U(VI) release from autunite mineral by aerobic Arthrobacter sp. in the presence of aqueous bicarbonate

    SciTech Connect (OSTI)

    Katsenovich, Yelena P.; Carvajal, Denny A.; Wellman, Dawn M.; Lagos, Leonel E.

    2012-05-01

    The bacterial effect on U(VI) release from the autunite mineral (Ca[(UO2)(PO4)]2•3H2O) was investigated to provide a more comprehensive understanding of the important microbiological processes affecting autunite stability within subsurface bicarbonate-bearing environments. Experiments were performed in a culture of the Arthrobacter oxydans G975 strain, herein referred to as G975, a soil bacterium previously isolated from Hanford Site soil. 91 mg of autunite powder and 50 mL of phosphorous-limiting sterile media were amended with bicarbonate (ranging between 1 and 10 mM) in glass reactor bottles and inoculated with the G975 strain after the dissolution of autunite was at steady state. SEM observations indicated that G975 formed a biofilm on the autunite surface and penetrated the mineral cleavages. The mineral surface colonization by bacteria tended to increase concomitantly with bicarbonate concentrations. Additionally, a sterile culture-ware with inserts was used in non-contact dissolution experiments where autunite and bacteria cells were kept separately. The data suggest that G975 bacteria is able to enhance the release of U(VI) from autunite without direct contact with the mineral. In the presence of bicarbonate, the damage to bacterial cells caused by U(VI) toxicity was reduced, yielding similar values for total organic carbon (TOC) degradation and cell density compared to U(VI)-free controls. The presence of active bacterial cells greatly enhanced the release of U(VI) from autunite in bicarbonate-amended media.

  2. Fission-Product Separation Based on Room-Temperature Ionic Liquids (OR08SP24-16)

    SciTech Connect (OSTI)

    Luo, Huimin; Bonnesen, Peter V.; Rogers, Robin D.; Dai, Sheng; Buchanan, A. C. III; Hussey, Charles L.

    2002-06-15

    The objectives of this project are (a) to synthesize new ionic liquids tailored for the extractive separation of Cs + and Sr 2+; (b) to select optimum macrocyclic extractants through studies of complexation of fission products with macrocyclic extractants and transport in new extraction systems based on ionic liquids; (c) to develop efficient processes to recycle ionic liquids and crown ethers; and (d) to investigate chemical stabilities of ionic liquids under strong acid, strong base, and high-level-radiation conditions.

  3. Complete Genome Sequence of Pelosinus sp. Strain UFO1 Assembled Using Single-Molecule Real-Time DNA Sequencing Technology

    SciTech Connect (OSTI)

    Steven D. Brown; Sagar M. Utturkar; Timothy S. Magnuson; Allison E. Ray; Farris L. Poole; W. Andrew Lancaster; Michael P. Thorgersen; Michael W. W. Adams; Dwayne A. Elias

    2014-09-01

    Pelosinus fermentans strain R7 was isolated from Russian kaolin clays as the type strain and it can reduce Fe(III) during fermentative growth (1). Draft genome sequences for P. fermentans R7 and four strains from Hanford, Washington, USA, have been published (24). The P. fermentans 16S rRNA sequence dominated the lactate-based enrichment cultures from three geochemically contrasting soils from the Melton Branch Watershed, Oak Ridge, Tennessee, USA (5) and also at another stimulated, uraniumcontaminated field site near Oak Ridge (6). For the current work, strain UFO1 was isolated from pristine sediments at a background field site in Oak Ridge and characterized as facilitating U(VI) reduction and precipitation with phosphate (7).

  4. Microsoft Word - Final New England Constraint STEO Supplement 011713v1 clean _4_ LF_SP_rev cw.docx

    Gasoline and Diesel Fuel Update (EIA)

    August 2016 U.S. Energy Information Administration | Natural Gas Monthly 4 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 2013 2014 2015 2016 2017 Production of Dry Gas Total Consumption Net Imports trillion cubic feet Figure 1. Production, consumption, and net imports of natural gas in the United States, 2013-2016 Sources: 2012-2014: Energy Information Administration (EIA), Natural Gas Annual 2014. January 2015 through current month: Form EIA-914, "Monthly

  5. Soils Project Risk-Based Corrective Action Evaluation Process with ROTC 1 and ROTC 2, Revision 0

    SciTech Connect (OSTI)

    Matthews, Patrick; Sloop, Christina

    2012-04-01

    This document formally defines and clarifies the NDEP-approved process the NNSA/NSO Soils Activity uses to fulfill the requirements of the FFACO and state regulations. This process is used to establish FALs in accordance with the risk-based corrective action (RBCA) process stipulated in Chapter 445 of the Nevada Administrative Code (NAC) as described in the ASTM International (ASTM) Method E1739-95 (NAC, 2008; ASTM, 1995). It is designed to provide a set of consistent standards for chemical and radiological corrective actions.

  6. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Biodiesel is defined as a fuel that is comprised of mono-alkyl esters of long chain fatty acids derived from vegetable oil or animal fats and that meets ASTM D6751. Green diesel is ...

  7. Race to Zero Competition Jurors | Department of Energy

    Office of Environmental Management (EM)

    ... Lance has developed expertise in mechanical codes and piping standards and is a member of ASHRAE, ASME, ASPE, ASTM, AWWA, CSA, IAPMO, NEMA, RPA, and UL, serving on technical ...

  8. Ralph T. Muehleisen | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Meetings on Acoustics, a voting member of several ASTM and ASHRAE Technical Committees, chair to the ASHRAE TC 4.7 Data Driven Modeling subcommittee and the vice-chair of ...

  9. Find Standards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    API ASCE ASHRAE ASME ASME-BPVC ASQ ASSE ASTM AWS CGA standards - contact Timothy Lopez (timlopez@lanl.gov), Ben Swartz (abswartz@lanl.gov), or Roberto Trujillo (robertot@lanl.gov) ...

  10. Results of the 2007 B100 Quality Survey

    SciTech Connect (OSTI)

    Alleman, T. L.; McCormick, R. L.

    2008-03-01

    In a 2007 analysis of samples from 52% of U.S. biodiesel (B100) producers, 90% met ASTM and other specifications for critical engine performance properties and for elements that harm emission controls.

  11. Explanatory notes for research cell efficiency records

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    60904-3 edition 2 or ASTM G173. The reference temperature is 25C and the area is the cell total area or the area defined by an aperture. Cell efficiency results are provided...

  12. Measuring solar reflectance Part I: Defining a metric that accurately...

    Office of Scientific and Technical Information (OSTI)

    A widely used solar reflectance metric based on the ASTM Standard E891 beam-normal solar spectral irradiance underestimates the solar heat gain of a spectrally selective 'cool ...

  13. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... A widely used solar reflectance metric based on the ASTM Standard E891 beam-normal solar spectral irradiance underestimates the solar heat gain of a spectrally selective 'cool ...

  14. Low-Cycle-Fatigue Behavior of Copper Materials and Their Use

    Office of Scientific and Technical Information (OSTI)

    ... The smaller value corresponds to test data performed at 300 O C in high vacuum on a regular ASTM fatigue specimen 5. The larger value is from the test data 2 performed at room ...

  15. BioFuel Oasis | Open Energy Information

    Open Energy Info (EERE)

    Zip: 94710 Product: A worker-owned cooperative to sell commercial biodiesel that meets ASTM standards. References: BioFuel Oasis1 This article is a stub. You can help OpenEI by...

  16. TID-4500, UC-4 Chemistry Lawpenoe R

    Office of Scientific and Technical Information (OSTI)

    ... was also investigated. in the standard copper cylinder a r e p r e - sented in Fig. 5 . ... wave l e n s 2 Comp B Cylinder: OFHC Copper, ASTM-B-187, density 8.93 gcc, i .d. ...

  17. CX-010700: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Development of ASTM Standard for SiC-SiC Joint Testing - General Atomics CX(s) Applied: B3.6 Date: 06/19/2013 Location(s): Idaho Offices(s): Idaho Operations Office

  18. Applications for Coal and Natural Gas Power Plants in a Smart...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... ASHRAE EASA NECA ASME IEEE NEMA ASSE IESNA NFPA ASTM INCITS NERC AWEA ISA NAESB AHAM ICC ... % reduction of GHG emissions compared to 1990 levels - 20 % of renewable energy sources ...

  19. CX-014298: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Environmental Stress-Cracking Resistance Testing (ASTM D1693) CX(s) Applied: B3.6Date: 08/27/2015 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  20. CX-012552: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Use of the ASTM G 36-94 Method for the Evaluation of Stress Corrosion Cracking CX(s) Applied: B3.6Date: 41879 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  1. untitled

    U.S. Energy Information Administration (EIA) Indexed Site

    gravity of 22 degrees or below. Interme- diate crudes fall in the range of 22 degrees to 38 de- grees API gravity. ASTM: American Society for Testing and Materials. Aviation...

  2. Reformulated diesel fuel

    DOE Patents [OSTI]

    McAdams, Hiramie T [Carrollton, IL; Crawford, Robert W [Tucson, AZ; Hadder, Gerald R [Oak Ridge, TN; McNutt, Barry D [Arlington, VA

    2006-03-28

    Reformulated diesel fuels for automotive diesel engines which meet the requirements of ASTM 975-02 and provide significantly reduced emissions of nitrogen oxides (NO.sub.x) and particulate matter (PM) relative to commercially available diesel fuels.

  3. Fry receives Charles W. Briggs Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fry receives Charles W. Briggs Award Fry receives Charles W. Briggs Award The ASTM International Committee E07 on Nondestructive Testing has honored David Fry with the Charles W. Briggs Award. June 2, 2014 David Fry David Fry Fry was recognized for his continuous and outstanding contributions to the standards development work of the committee through its subcommittees, sections and task groups. The ASTM International Committee E07 on Nondestructive Testing has honored David Fry of Applied

  4. Arsenic transformation predisposes human skin keratinocytes to UV-induced DNA damage yet enhances their survival apparently by diminishing oxidant response

    SciTech Connect (OSTI)

    Sun Yang; Kojima, Chikara; Chignell, Colin; Mason, Ronald; Waalkes, Michael P.

    2011-09-15

    Inorganic arsenic and UV, both human skin carcinogens, may act together as skin co-carcinogens. We find human skin keratinocytes (HaCaT cells) are malignantly transformed by low-level arsenite (100 nM, 30 weeks; termed As-TM cells) and with transformation concurrently undergo full adaptation to arsenic toxicity involving reduced apoptosis and oxidative stress response to high arsenite concentrations. Oxidative DNA damage (ODD) is a possible mechanism in arsenic carcinogenesis and a hallmark of UV-induced skin cancer. In the current work, inorganic arsenite exposure (100 nM) did not induce ODD during the 30 weeks required for malignant transformation. Although acute UV-treatment (UVA, 25 J/cm{sup 2}) increased ODD in passage-matched control cells, once transformed by arsenic to As-TM cells, acute UV actually further increased ODD (> 50%). Despite enhanced ODD, As-TM cells were resistant to UV-induced apoptosis. The response of apoptotic factors and oxidative stress genes was strongly mitigated in As-TM cells after UV exposure including increased Bcl2/Bax ratio and reduced Caspase-3, Nrf2, and Keap1 expression. Several Nrf2-related genes (HO-1, GCLs, SOD) showed diminished responses in As-TM cells after UV exposure consistent with reduced oxidant stress response. UV-exposed As-TM cells showed increased expression of cyclin D1 (proliferation gene) and decreased p16 (tumor suppressor). UV exposure enhanced the malignant phenotype of As-TM cells. Thus, the co-carcinogenicity between UV and arsenic in skin cancer might involve adaptation to chronic arsenic exposure generally mitigating the oxidative stress response, allowing apoptotic by-pass after UV and enhanced cell survival even in the face of increased UV-induced oxidative stress and increased ODD. - Highlights: > Arsenic transformation adapted to UV-induced apoptosis. > Arsenic transformation diminished oxidant response. > Arsenic transformation enhanced UV-induced DNA damage.

  5. Final predictions of ambient conditions along the east-west crossdrift using the 3-D UZ site-scale model. Level 4 milestoneSP33ABM4.

    SciTech Connect (OSTI)

    Ritcey, A.C.; Sonnenthal, E.L.; Wu, Y.S.; Haukwa, C.; Bodvarsson,G.S.

    1998-03-01

    In 1998, the Yucca Mountain Site Characterization Project (YMP) is expected to continue construction of an East-West Cross Drift. The 5-meter diameter drift will extend from the North Ramp of the Exploratory Studies Facility (ESF), near Station 19+92, southwest through the repository block, and over to and through the Solitario Canyon Fault. This drift is part of a program designed to enhance characterization of Yucca Mountain and to complement existing surface-based and ESF testing studies. The objective of this milestone is to use the three-dimensional (3-D) unsaturated zone (UZ) site-scale model to predict ambient conditions along the East-West Cross Drift. These predictions provide scientists and engineers with a priori information that can support design and construction of the East-West Cross Drift and associated testing program. The predictions also provide, when compared with data collected after drift construction, an opportunity to test and verify the calibration of the 3-D UZ site-scale model.

  6. Complete genome sequence of Pelosinus sp. strain UFO1 assembled using single-molecule real-time DNA sequencing technology

    SciTech Connect (OSTI)

    Brown, Steven D.; Utturkar, Sagar M.; Magnuson, Timothy S.; Ray, Allison E.; Poole, Farris L.; Lancaster, W. Andrew; Thorgersen, Michael P.; Adams, Michael W. W.; Elias, Dwayne A.

    2014-09-04

    Pelosinus fermentans strain R7 was isolated from Russian kaolin clays as the type strain and it can reduce Fe(III) during fermentative growth (1). Draft genome sequences for P. fermentans R7 and four strains from Hanford, Washington, USA, have been published (24). The P. fermentans 16S rRNA sequence dominated the lactate-based enrichment cultures from three geochemically contrasting soils from the Melton Branch Watershed, Oak Ridge, Tennessee, USA (5) and also at another stimulated, uraniumcontaminated field site near Oak Ridge (6). For the current work, strain UFO1 was isolated from pristine sediments at a background field site in Oak Ridge and characterized as facilitating U(VI) reduction and precipitation with phosphate (7).

  7. High quality draft genome sequence of Leucobacter chironomi strain MM2LBT (DSM 19883T) isolated from a Chironomus sp. egg mass

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Laviad, Sivan; Lapidus, Alla; Copeland, Alex; Reddy, T. B. K.; Huntemann, Marcel; Pati, Amrita; Ivanova, Natalia N.; Markowitz, Victor M.; Pukall, Rüdiger; Klenk, Hans-Peter; et al

    2015-05-08

    Leucobacter chironomi strain MM2LBT (Halpern et al., Int J Syst Evol Microbiol 59:665-70 2009) is a Gram-positive, rod shaped, non-motile, aerobic, chemoorganotroph bacterium. L. chironomi belongs to the family Microbacteriaceae, a family within the class Actinobacteria. Strain MM2LBT was isolated from a chironomid (Diptera; Chironomidae) egg mass that was sampled from a waste stabilization pond in northern Israel. In a phylogenetic tree based on 16S rRNA gene sequences, strain MM2LBT formed a distinct branch within the radiation encompassing the genus Leucobacter. Here we describe the features of this organism, together with the complete genome sequence and annotation. We find thatmore » the DNA GC content is 69.90%. The chromosome length is 2,964,712 bp. It encodes 2,690 proteins and 61 RNA genes. L. chironomi genome is part of the Genomic Encyclopedia of Type Strains, Phase I: the one thousand microbial genomes (KMG) project.« less

  8. High quality draft genome sequence of Leucobacter chironomi strain MM2LBT (DSM 19883T) isolated from a Chironomus sp. egg mass

    SciTech Connect (OSTI)

    Laviad, Sivan; Lapidus, Alla; Copeland, Alex; Reddy, T. B. K.; Huntemann, Marcel; Pati, Amrita; Ivanova, Natalia N.; Markowitz, Victor M.; Pukall, Rüdiger; Klenk, Hans-Peter; Woyke, Tanja; Kyrpides, Nikos C.; Halpern, Malka

    2015-05-08

    Leucobacter chironomi strain MM2LBT (Halpern et al., Int J Syst Evol Microbiol 59:665-70 2009) is a Gram-positive, rod shaped, non-motile, aerobic, chemoorganotroph bacterium. L. chironomi belongs to the family Microbacteriaceae, a family within the class Actinobacteria. Strain MM2LBT was isolated from a chironomid (Diptera; Chironomidae) egg mass that was sampled from a waste stabilization pond in northern Israel. In a phylogenetic tree based on 16S rRNA gene sequences, strain MM2LBT formed a distinct branch within the radiation encompassing the genus Leucobacter. Here we describe the features of this organism, together with the complete genome sequence and annotation. We find that the DNA GC content is 69.90%. The chromosome length is 2,964,712 bp. It encodes 2,690 proteins and 61 RNA genes. L. chironomi genome is part of the Genomic Encyclopedia of Type Strains, Phase I: the one thousand microbial genomes (KMG) project.

  9. High quality draft genome sequence of Brachymonas chironomi AIMA4T (DSM 19884T) isolated from a Chironomus sp. egg mass

    SciTech Connect (OSTI)

    Laviad, Sivan; Lapidus, Alla; Han, James; Haynes, Matthew; Reddy, TBK; Huntemann, Marcel; Pati, Amrita; Ivanova, Natalia N.; Mavromatis, Konstantinos; Lang, Elke; Rohde, Manfred; Markowitz, Victor; Woyke, Tanja; Klenk, Hans-Peter; Kyrpides, Nikos C.; Halpern, Malka

    2015-05-27

    Brachymonas chironomi strain AIMA4T (Halpern et al., 2009) is a Gram-negative, non-motile, aerobic, chemoorganotroph bacterium. B. chironomi is a member of the Comamonadaceae, a family within the class Betaproteobacteria. This species was isolated from a chironomid (Diptera; Chironomidae) egg mass, sampled from a waste stabilization pond in northern Israel. Phylogenetic analysis based on the 16S rRNA gene sequences placed strain AIMA4T in the genus Brachymonas. Here we describe the features of this organism, together with the complete genome sequence and annotation. We find the DNA GC content is 63.5%. The chromosome length is 2,509,395 bp. It encodes 2,382 proteins and 68 RNA genes. Brachymonas chironomi genome is part of the Genomic Encyclopedia of Type Strains, Phase I: the one thousand microbial genomes (KMG) project.

  10. High quality draft genome sequence of Brachymonas chironomi AIMA4T (DSM 19884T) isolated from a Chironomus sp. egg mass

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Laviad, Sivan; Lapidus, Alla; Han, James; Haynes, Matthew; Reddy, TBK; Huntemann, Marcel; Pati, Amrita; Ivanova, Natalia N.; Mavromatis, Konstantinos; Lang, Elke; et al

    2015-05-27

    Brachymonas chironomi strain AIMA4T (Halpern et al., 2009) is a Gram-negative, non-motile, aerobic, chemoorganotroph bacterium. B. chironomi is a member of the Comamonadaceae, a family within the class Betaproteobacteria. This species was isolated from a chironomid (Diptera; Chironomidae) egg mass, sampled from a waste stabilization pond in northern Israel. Phylogenetic analysis based on the 16S rRNA gene sequences placed strain AIMA4T in the genus Brachymonas. Here we describe the features of this organism, together with the complete genome sequence and annotation. We find the DNA GC content is 63.5%. The chromosome length is 2,509,395 bp. It encodes 2,382 proteins andmore » 68 RNA genes. Brachymonas chironomi genome is part of the Genomic Encyclopedia of Type Strains, Phase I: the one thousand microbial genomes (KMG) project.« less

  11. High-quality permanent draft genome sequence of Bradyrhizobium sp. Tv2a.2, a microsymbiont of Tachigali versicolor discovered in Barro Colorado Island of Panama

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tian, Rui; Parker, Matthew; Seshadri, Rekha; Reddy, TBK; Markowitz, Victor; Ivanova, Natalia; Pati, Amrita; Woyke, Tanja; Baeshen, Mohammed N.; Baeshen, Nabih A.; et al

    2015-05-17

    Bradyrhizobiumsp. Tv2a.2 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective nitrogen-fixing root nodule of Tachigali versicolor collected in Barro Colorado Island of Panama. Here we describe the features of Bradyrhizobiumsp. Tv2a.2, together with high-quality permanent draft genome sequence information and annotation. The 8,496,279 bp high-quality draft genome is arranged in 87 scaffolds of 87 contigs, contains 8,109 protein-coding genes and 72 RNA-only encoding genes. In conclusion, this rhizobial genome was sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project.

  12. Structural insulated panels produced from recycled Expanded-Polystrene (EPS) foam scrap. Final report

    SciTech Connect (OSTI)

    Grinnell, A.

    1996-11-01

    This report documents a research project undertaken to assess the feasibility of using scrap reground expanded polystyrene (EPS) in the manufacture of structural insulated panels (SIPs) in order to save material costs and reduce the amount of EPS waste products to be disposed. The project team, managed by Steven Winter Associates, Inc., a Norwalk, Connecticut-based building systems research and consulting firm included: Thermal Foams, Inc., a Buffalo-based manufacturer of EPS products; BASF Corp., the world`s largest producer of EPS beads; Oak Ridge National Laboratory, which performed thermal tests (ASTM C-518); RADCO, Inc. which performed material properties tests: density (ASTM C-303), flexural strength (ASTM C-203), tensile strength (ASTM D-1623), and transverse load test of SIPs panels (ASTM E-72). The report documents the manufacturing and testing process and concludes that there was relatively little difference in the thermal and structural characteristics under normal loading conditions of the panels tested with varying amount of regrind (from 10% - 25%) and those made with 100% virgin beads. The report recommends that additional tests be undertaken, but suggests that, based on the test results, reground EPS can be successfully used in the cores of SIPs in amounts up to 25%.

  13. Analytical Results For MOX Colemanite Concrete Samples Received On November, 2013

    SciTech Connect (OSTI)

    Reigel, Marissa M.

    2013-12-18

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory (SRNL) is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. SRNL received two samples of colemanite concrete for analysis on November 21, 2013. The average total density of each of the samples measured by the ASTM method C 642, the average partial hydrogen density was measured using method ASTM E 1131, and the average partial boron density of each sample was measured according to ASTM C 1301. For all the samples tested, the total density and the boron partial density met or exceeded the specified limit. None of the samples met the lower limit for hydrogen partial density.

  14. ANALYTICAL RESULTS FOR MOX COLEMANITE CONCRETE SAMPLES RECEIVED ON SEPTEMBER 4, 2013

    SciTech Connect (OSTI)

    Reigel, M.

    2014-05-19

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory (SRNL) is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. SRNL received three samples of colemanite concrete for analysis on September 4, 2013. The average total density of each of the samples measured by the ASTM method C 642, the average partial hydrogen density was measured using method ASTM E 1131, and the average partial boron density of each sample was measured according to ASTM C 1301. The lower limits and measured values for the total density, hydrogen partial density, and boron partial density are presented. For all the samples tested, the total density and the boron partial density met or exceeded the specified limit. None of the samples met the lower limit for hydrogen partial density.

  15. ANALYTICAL RESULTS FOR MOX COLEMANITE CONCRETE SAMPLES RECEIVED ON NOVEMBER 21, 2013

    SciTech Connect (OSTI)

    Reigel, M.

    2014-05-19

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory (SRNL) is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. SRNL received two samples of colemanite concrete for analysis on November 21, 2013. The average total density of each of the samples measured by the ASTM method C 642, the average partial hydrogen density was measured using method ASTM E 1131, and the average partial boron density of each sample was measured according to ASTM C 1301. The lower limits and measured values for the total density, hydrogen partial density, and boron partial density are presented. For all the samples tested, the total density and the boron partial density met or exceeded the specified limit. None of the samples met the lower limit for hydrogen partial density.

  16. Analytical Results For MOX Colemanite Concrete Samples Received On September 4, 2013

    SciTech Connect (OSTI)

    Reigel, Marissa M.

    2013-09-24

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory (SRNL) is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. SRNL received three samples of colemanite concrete for analysis on September 4, 2013. The average total density of each of the samples measured by the ASTM method C 642, the average partial hydrogen density was measured using method ASTM E 1131, and the average partial boron density of each sample was measured according to ASTM C 1301. The lower limits and measured values for the total density, hydrogen partial density, and boron partial density are presented. For all the samples tested, the total density and the boron partial density met or exceeded the specified limit. None of the samples met the lower limit for hydrogen partial density.

  17. RNA polymerase gene, microorganism having said gene and the production of RNA polymerase by the use of said microorganism

    DOE Patents [OSTI]

    Kotani, Hirokazu; Hiraoka, Nobutsugu; Obayashi, Akira

    1991-01-01

    SP6 bacteriophage RNA polymerase is produced by cultivating a new microorganism (particularly new strains of Escherichia coli) harboring a plasmid that carries SP6 bacteriophage RNA polymerase gene and recovering SP6 bacteriophage RNA polymerase from the culture broth. SP6 bacteriophage RNA polymerase gene is provided as are new microorganisms harboring a plasmid that carries SP6 bacteriophage RNA polymerase gene.

  18. Certification of alternative aviation fuels and blend components

    SciTech Connect (OSTI)

    Wilson III, George R. ); Edwards, Tim; Corporan, Edwin ); Freerks, Robert L. )

    2013-01-15

    Aviation turbine engine fuel specifications are governed by ASTM International, formerly known as the American Society for Testing and Materials (ASTM) International, and the British Ministry of Defence (MOD). ASTM D1655 Standard Specification for Aviation Turbine Fuels and MOD Defence Standard 91-91 are the guiding specifications for this fuel throughout most of the world. Both of these documents rely heavily on the vast amount of experience in production and use of turbine engine fuels from conventional sources, such as crude oil, natural gas condensates, heavy oil, shale oil, and oil sands. Turbine engine fuel derived from these resources and meeting the above specifications has properties that are generally considered acceptable for fuels to be used in turbine engines. Alternative and synthetic fuel components are approved for use to blend with conventional turbine engine fuels after considerable testing. ASTM has established a specification for fuels containing synthesized hydrocarbons under D7566, and the MOD has included additional requirements for fuels containing synthetic components under Annex D of DS91-91. New turbine engine fuel additives and blend components need to be evaluated using ASTM D4054, Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives. This paper discusses these specifications and testing requirements in light of recent literature claiming that some biomass-derived blend components, which have been used to blend in conventional aviation fuel, meet the requirements for aviation turbine fuels as specified by ASTM and the MOD. The 'Table 1' requirements listed in both D1655 and DS91-91 are predicated on the assumption that the feedstocks used to make fuels meeting these requirements are from approved sources. Recent papers have implied that commercial jet fuel can be blended with renewable components that are not hydrocarbons (such as fatty acid methyl esters). These are not allowed blend

  19. NREL Survey Shows Dramatic Improvement in B100 Biodiesel Quality - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases | NREL Survey Shows Dramatic Improvement in B100 Biodiesel Quality April 15, 2013 The latest national survey of 100% biodiesel (B100) "blend stock" samples by the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) found that 95% of the samples from 2011-12 met ASTM International fuel quality specifications. The ASTM standards serve as guidelines for industry and are designed to ensure quality at the pump for consumers - along with reliable operation of

  20. On defining core properties for composite sandwich panels

    SciTech Connect (OSTI)

    DeSautel, J.M.; Sikarskie, D.L.

    1997-12-31

    In the interests of performance, fuel economy, as well as other factors, weight reduction in transportation vehicles is receiving considerable attention. It is well know that sandwich construction can provide a structural component that has both high stiffness and high strength per unit weight. In a sandwich structure a low density, low stiffness, low strength core is bonded between two high stiffness, high strength facesheets producing a structure that is particularly efficient in resisting bending loads. A key element in a sandwich construction is the core. Its` properties, particularly its` shear modulus and yield/failure stress, must be accurately known for proper structural design. Two ASTM standards exist for determining these properties; ASTM C273-88 and ASTM C393-94. The ASTM C273-88 is a simple shear test on the core material alone, while the ASTM C393-94 obtains core properties through bending data on sandwich beams. It is well known, particularly for the lower cost cores, e.g. foams, that differences in properties, sometimes appreciable, exist for these two tests. One of the main purposes of the present paper is to show that specimen geometry can have a first order effect on the material properties, i.e. only for ratios of sandwich beam length to thickness in the ASTM C393-94 test greater than 20 do the results of the two ASTM tests approach each other. A second objective of the paper is to determine the effect of the shear test plate thickness in the ASTM C273-88 test. Steel plates of thickness {1/4} inches, 5/8 inches, and 1 inch were used, i.e. bonded to the core specimens and then tested in simple shear. Only for the stiffest cores tested were any statistically different results obtained and then only minor differences for the {1/4} inches plates. Some typical test results through to core yield/failure are shown to demonstrate the different post yield behaviors.

  1. Titanium alloy 5111 brings intermediate strength, excellent toughness, and corrosion resistance to naval operating environments

    SciTech Connect (OSTI)

    Been, J.

    1999-07-01

    Ti-5Al-1Sn-1Zr-1V-O.8M0 is a near alpha titanium alloy of intermediate strength, designed for high toughness, good weldability, stress-corrosion cracking resistance, and room temperature creep resistance. Ideally suited for marine environments, Ti 5111 offers the means to aid the navy in fulfilling their goals of reducing maintenance and life cycle costs, reducing topside and overall weight, improve survivability and increase reliability. The alloy was recently included in the ASTM bar and plate specifications as ASTM Grade 32.

  2. Vacuum infusion manufacturing and experimental characterization of Kevlar/epoxy composites

    SciTech Connect (OSTI)

    Ricciardi, M. R.; Giordano, M.; Antonucci, V.; Langella, A.; Nele, L.

    2014-05-15

    Epoxy/Kevlar composites have been manufactured by conventional Vacuum Infusion process and the Pulse Infusion technique. Pulse Infusion allows to control the pressure of the vacuum bag on the dry fiber reinforcement by using a proper designed pressure distributor that induces a pulsed transverse action and promotes the through thickness resin flow. The realized composite panel have been mechanically characterized by performing tensile and short beam shear tests according with the ASTM D3039 and ASTM D2344/D 2344M standard respectively in order to investigate the effect of Pulse Infusion on the tensile strength and ILSS.

  3. Subject: Executive and Senior Level Pay and Performance Management System …

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FY 2016 Senior Professional (SP) Performance Appraisal System Opening Guidance 2 Table of Contents Contents I. SP PERFORMANCE APPRAISAL TEMPLATE and TIMELINE ....................................................................... 3 II. PERFORMANCE PLAN - CRITICAL ELEMENTS .......................................................................................... 3 III. SP SUMMARY RATING LEVEL DEFINITIONS

  4. Effect of petroleum hydrocarbons on algae

    SciTech Connect (OSTI)

    Bhadauria, S. ); Sengar, R.M.S. ); Mittal, S.; Bhattacharjee, S. )

    1992-01-01

    Algal species (65) were isolated from oil refinery effluent. Twenty-five of these species were cultured in Benecke's medium in a growth chamber, along with controls. Retardation in algal growth, inhibition in algal photosynthesis, and discoloration was observed in petroleum enriched medium. Few forms, viz. Cyclotella sp., Cosmarium sp., and Merismopedia sp. could not survive. The lag phase lengthened by several days and slope of exponential phase was also depressed. Chlamydomonas sp., Scenedesmus sp., Ankistrodesmus sp., Nitzschia sp. and Navicula sp. were comparatively susceptible to petroleum. Depression in carbon fixation, cell numbers, and total dry algal mass was noticeable, showing toxicity to both diatoms and green algae.

  5. Accelerating the development of transparent graphene electrodes...

    Office of Scientific and Technical Information (OSTI)

    spatially resolved Raman spectroscopy, and water contact angle measurement. Covalent attachment rehybridized some of the delocalized graphene sp2 orbitals to localized sp3 states....

  6. Corrosion and wear resistance of tungsten carbide-cobalt and tungsten carbide-cobalt-chromium thermal spray coatings

    SciTech Connect (OSTI)

    Quets, J.; Alford, J.R.

    1999-07-01

    Tungsten carbide thermal spray coatings provide wear surfaces to new and overhauled components for various industries. Their wear resistance is obtained by incorporating small tungsten carbide particles into a metal matrix. This presentation will show what parameters influence their corrosion resistance in the ASTM B-117 Salt Spray Corrosion Test,

  7. Progress in Developing Finite Element Models Replicating Flexural Graphite Testing

    SciTech Connect (OSTI)

    Robert Bratton

    2010-06-01

    This report documents the status of flexural strength evaluations from current ASTM procedures and of developing finite element models predicting the probability of failure. This work is covered under QLD REC-00030. Flexural testing procedures of the American Society for Testing and Materials (ASTM) assume a linear elastic material that has the same moduli for tension and compression. Contrary to this assumption, graphite is known to have different moduli for tension and compression. A finite element model was developed and demonstrated that accounts for the difference in moduli tension and compression. Brittle materials such as graphite exhibit significant scatter in tensile strength, so probabilistic design approaches must be used when designing components fabricated from brittle materials. ASTM procedures predicting probability of failure in ceramics were compared to methods from the current version of the ASME graphite core components rules predicting probability of failure. Using the ASTM procedures yields failure curves at lower applied forces than the ASME rules. A journal paper was published in the Journal of Nuclear Engineering and Design exploring the statistical models of fracture in graphite.

  8. High Efficiency Spectrum Splitting Prototype Submodule Using Commercial CPV Cells (Presentation)

    SciTech Connect (OSTI)

    Keevers, M.; Lau, J.; Green, M.; Thomas, I.; Lasich, J.; King, R.; Emery, K.

    2014-11-01

    This presentation summarizes progress on the design, fabrication and testing of a proof-of-concept, prototype spectrum splitting CPV submodule using commercial CPV cells, aimed at demonstrating an independently confirmed efficiency above 40% at STC (1000 W/m2, AM1.5D ASTM G173-03, 25 degrees C).

  9. Formability of metallic materials - 2000 A. D

    SciTech Connect (OSTI)

    Newby, J.R.; Niemeier, B.A.

    1982-01-01

    This volume contains 18 papers presented at the meeting of ASTM, of which one is abstracted separately. The subjects covered include formability of steel, aluminum, various metallic composites and sheet materials for automobile bodies. The symposium was also reviewing past experience in forming metallic materials and potential formability technologies.

  10. Factors Affecting the Stability of Biodiesel Sold in the United States

    SciTech Connect (OSTI)

    McCormick, R. L.; Ratcliff, M.; Moens, L.; Lawrence, R.

    2006-01-01

    As part of a survey of biodiesel quality and stability in the United States, 27 biodiesel (B100) samples were collected from blenders and distributor nationwide. For this sample set, 85% met all of the requirements of the industry standard for biodiesel, ASTM D6751.

  11. Survey of Flex Fuel in 2014. CRC Project E-85-3

    SciTech Connect (OSTI)

    Alleman, Teresa L.

    2015-07-27

    ASTM D5798 sets the specifications for Ethanol Flex Fuel, which currently permits between 51 volume percent (vol%) and 83 vol% ethanol. The vapor pressure varies seasonally and geographically and is divided into four distinct classes to ensure year-round driveability. This project is the first survey of Ethanol Flex Fuel since these specification changes were made to Specification D5798.

  12. Analysis of Biodiesel Blends Samples Collected in the United States in 2008 (Revised)

    SciTech Connect (OSTI)

    Alleman, T. L.; Fouts, L.; McCormick, R. L.

    2010-12-01

    NREL sampled and tested the quality of U.S. B20 (20% biodiesel, 80% petroleum diesel) in 2008; 32 samples from retail locations and fleets were tested against a proposed ASTM D7467 B6-B20 specification, now in effect.

  13. Sustainable Alternative Jet Fuels | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nate Brown, Federal Aviation Administration, presentation at the Industry Roundtable on Update on ASTM Approval. 10_brown_roundtable.pdf (575.65 KB) More Documents & Publications An Update on FAA Alternative Jet Fuel Efforts CAAFI Progress Update Airlines & Aviation Alternative Fuels: Our Drive to Be Early Market Adopters

  14. Technical Standards Newsletter - April 2003 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Technical Standards Newsletter - April 2003 The Standards Forum and Standards Actions - April 2003 Inside this issue: DOE Technical Standards Projects Initiated........................................... 1 DOE Technical Standards Recently Sent for Coordination..................... 1 DOE Technical Standards Recently Published........................................ 2 American National Standards Institute.......................................................... 2 ASTM

  15. Fire Safety Tests for Spherical Resorcinol Formaldehyde Resin: Data Summary Report

    SciTech Connect (OSTI)

    Kim, Dong-Sang; Peterson, Reid A.; Schweiger, Michael J.

    2012-07-30

    A draft safety evaluation of the scenario for spherical resorcinol-formaldehyde (SRF) resin fire inside the ion exchange column was performed by the Hanford Tank Waste Treatment and Immobilization Plant (WTP) Fire Safety organization. The result of this draft evaluation suggested a potential change of the fire safety classification for the Cesium Ion Exchange Process System (CXP) emergency elution vessels, equipment, and piping, which may be overly bounding based on the fire performance data from the manufacturer of the ion exchange resin selected for use at the WTP. To resolve this question, the fire properties of the SRF resin were measured by Southwest Research Institute (SwRI), following the American Society for Testing and Materials (ASTM) standard procedures, through a subcontract managed by Pacific Northwest National Laboratory (PNNL). For some tests, the ASTM standard procedures were not entirely appropriate or practical for the SRF resin material, so the procedures were modified and deviations from the ASTM standard procedures were noted. This report summarizes the results of fire safety tests performed and reported by SwRI. The efforts by PNNL were limited to summarizing the test results provided by SwRI into one consolidated data report. All as-received SwRI reports are attached to this report in the Appendix. Where applicable, the precision and bias of each test method, as given by each ASTM standard procedure, are included and compared with the SwRI test results of the SRF resin.

  16. Compositional Analysis Laboratory (Poster), NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Compositional Analysis Laboratory * Provide customized analytical method development for a wide variety of feedstocks and process intermediates * Derive comprehensive biomass analysis results backed by 20 years of experience supporting the biomass conversion industry * Write publicly available Laboratory Analytical Procedures, several of which have been adapted by ASTM International and used and referenced worldwide * Provide training classes on biomass analysis and method development to help

  17. Niagara Air Quality Survey Report, 1987: Occidental Chemical Corporation, Niagara Falls, New York, USA, non-aqueous phase liquid (NAPL) incineration test. Report no. ARB-166-87-AR/SP

    SciTech Connect (OSTI)

    Bell, R.W.; DeBrou, G.

    1988-01-01

    An ambient air quality survey was conducted in the Niagara Falls area of Ontario from October 8-12, 1987 to provide on-site real-time screening for selected polychlorinated biphenyl congeners and other chlorinated organics at times when the Occidental Chemical Corporation was conducting tests at its liquid hazardous waste incineration facility in Niagara Falls, N.Y. During the incineration tests, the winds were such that the gaseous emissions from the Occidental facility were carried into the U.S. Since the monitoring units were restricted to the Canadian side of the Niagara River, only upwind air quality parameters could be measured.

  18. Proceedings of the international land reclamation and mine drainage conference and third international conference on the abatement of acidic drainage. Volume 4: Abandoned mine lands and topical issues -- SP 06D-94

    SciTech Connect (OSTI)

    Not Available

    1994-01-01

    Volume 4 of these proceedings is divided into the following sections: Subsidence--Reclamation, characterization (6 papers); Subsidence--Structural response (7); Abandoned mine land studies (6); Mine Hydrology--Topical issues (4); Mine waste--Topical issues (6); Policy issues (6); Miscellaneous poster session (14); and Abstracts (17). 53 papers dealing with or applicable to coal mining have been processed separately for inclusion on the data base.

  19. METHOD DEVELOPMENT FOR DETERMINING THE HYDRAULIC CONDUCTIVITY OF FRACTURED POROUS MEDIA

    SciTech Connect (OSTI)

    Dixon, K.

    2013-09-30

    Plausible, but unvalidated, theoretical model constructs for unsaturated hydraulic conductivity of fractured porous media are currently used in Performance Assessment (PA) modeling for cracked saltstone and concrete (Flach 2011). The Nuclear Regulatory Commission (NRC) has expressed concern about the lack of model support for these assumed Moisture Characteristic Curves (MCC) data, as noted in Requests for Additional Information (RAIs) PA-8 and SP-4 (Savannah River Remediation, LLC, 2011). The objective of this task was to advance PA model support by developing an experimental method for determining the hydraulic conductivity of fractured cementitious materials under unsaturated conditions, and to demonstrate the technique on fractured saltstone samples. The task was requested through Task Technical Request (TTR) HLW-SSF-TTR-2012-0016 and conducted in accordance with Task Technical & Quality Assurance Plan (TTQAP) SRNL-TR-2012-00090. Preliminary method development previously conducted by Kohn et al. (2012) identified transient outflow extraction as the most promising method for characterizing the unsaturated properties of fractured porous media. While the research conducted by Kohn et al. (2012) focused on fractured media analogs such as stacked glass slides, the current task focused directly on fractured saltstone. For this task, four sample types with differing fracture geometries were considered: 1) intact saltstone, 2) intact saltstone with a single saw cut, smooth surface fracture, 3) micro-fractured saltstone (induced by oven drying), and 4) micro-fractured saltstone with a single, fully-penetrating, rough-surface fracture. Each sample type was tested initially for saturated hydraulic conductivity following method ASTM D 5084 using a flexible wall permeameter. Samples were subsequently tested using the transient outflow extraction method to determine cumulative outflow as a function of time and applied pressure. Of the four sample types tested, two yielded

  20. Heat treated 9 Cr-1 Mo steel material for high temperature application

    DOE Patents [OSTI]

    Jablonski, Paul D.; Alman, David; Dogan, Omer; Holcomb, Gordon; Cowen, Christopher

    2012-08-21

    The invention relates to a composition and heat treatment for a high-temperature, titanium alloyed, 9 Cr-1 Mo steel exhibiting improved creep strength and oxidation resistance at service temperatures up to 650.degree. C. The novel combination of composition and heat treatment produces a heat treated material containing both large primary titanium carbides and small secondary titanium carbides. The primary titanium carbides contribute to creep strength while the secondary titanium carbides act to maintain a higher level of chromium in the finished steel for increased oxidation resistance, and strengthen the steel by impeding the movement of dislocations through the crystal structure. The heat treated material provides improved performance at comparable cost to commonly used high-temperature steels such as ASTM P91 and ASTM P92, and requires heat treatment consisting solely of austenization, rapid cooling, tempering, and final cooling, avoiding the need for any hot-working in the austenite temperature range.

  1. 9 Cr-- 1 Mo steel material for high temperature application

    DOE Patents [OSTI]

    Jablonski, Paul D; Alman, David; Dogan, Omer; Holcomb, Gordon; Cowen, Christopher

    2012-11-27

    One or more embodiments relates to a high-temperature, titanium alloyed, 9 Cr-1 Mo steel exhibiting improved creep strength and oxidation resistance at service temperatures up to 650.degree. C. The 9 Cr-1 Mo steel has a tempered martensite microstructure and is comprised of both large (0.5-3 .mu.m) primary titanium carbides and small (5-50 nm) secondary titanium carbides in a ratio of. from about 1:1.5 to about 1.5:1. The 9 Cr-1 Mo steel may be fabricated using exemplary austenizing, rapid cooling, and tempering steps without subsequent hot working requirements. The 9 Cr-1 Mo steel exhibits improvements in total mass gain, yield strength, and time-to-rupture over ASTM P91 and ASTM P92 at the temperature and time conditions examined.

  2. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Biodiesel and Renewable Diesel Definitions Biodiesel is defined as the monoalkyl esters of long chain fatty acids derived from plant or animals that meet the registration requirements for fuels and fuel additives established in Section 211 of the Clean Air Act, Title 42 of the U.S. Code of Federal Regulations, section 7545, and the requirements of ASTM D6751. Renewable diesel is defined as diesel fuel derived from biomass using a thermal depolymerization process that meets the registration

  3. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Alternative Fuel Definition and Specifications Alternative fuels include biofuel, ethanol, methanol, hydrogen, coal-derived liquid fuels, electricity, natural gas, propane gas, or a synthetic transportation fuel. Biofuel is defined as a renewable, biodegradable, combustible liquid or gaseous fuel derived from biomass or other renewable resources that can be used as transportation fuel, combustion fuel, or refinery feedstock and that meets ASTM specifications and federal quality requirements for

  4. Supercritical/Solid Catalyst (SSC)

    ScienceCinema (OSTI)

    None

    2013-05-28

    INL's patented, continuous-flow Supercritical/Solid Catalyst (SSC) produces the highest ASTM-quality B-100 biodiesel from waste fats, oils, and greases at the site of waste generation. SSC delivers low-cost transportation fuel, avoids significant landfill costs for municipalities, and reduces potent methane and other emissions produced in landfills from these wastes. You can learn more about INL's energy research programs at http://www.facebook.com/idahonationallaboratory.

  5. Elastic-plastic analysis of the SS-3 tensile specimen

    SciTech Connect (OSTI)

    Majumdar, S.

    1998-09-01

    Tensile tests of most irradiated specimens of vanadium alloys are conducted using the miniature SS-3 specimen which is not ASTM approved. Detailed elastic-plastic finite element analysis of the specimen was conducted to show that, as long as the ultimate to yield strength ratio is less than or equal to 1.25 (which is satisfied by many irradiated materials), the stress-plastic strain curve obtained by using such a specimen is representative of the true material behavior.

  6. Potential products from North Dakota lignite fly ash. Final report

    SciTech Connect (OSTI)

    Anderson, G R

    1980-06-01

    Four major areas where fly ash can be used are explored. Concrete building blocks with fly ash replacing 50% of the portland cement have proven to be successful using current ASTM standards. Results in the ceramics area show that a ceramic-like product using fly ash and crushed glass with a small amount of clay as a green binder. Some preliminary results using sulfur ash in building materials are reported and with results of making wallboard from ash. (MHR)

  7. Elements of oil-tanker transportation

    SciTech Connect (OSTI)

    Marks, A.

    1982-01-01

    Historical, economic, and statistical aspects of oil tanker transportation are discussed. In addition, oil tanker applied technology using a Hewlett-Packard 67 calculator is detailed. HP-67 programs are given in addition to theoretical formulas, references and examples need to solve the equations using any calculator. The contents include: berthing energy computation; Poisson distribution computation for estimating berth requirements; ship collision probability computation; spill risk analysis; oil spill movement computation; tanker characteristic computations; and ASTM measurement computations. (JMT)

  8. Federal / State Legislative & Regulatory Changes Required for Introduction

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of E15 | Department of Energy / State Legislative & Regulatory Changes Required for Introduction of E15 Federal / State Legislative & Regulatory Changes Required for Introduction of E15 Overview EPA Waiver Decision E15 Implementation Issues Federal and State Blending Restrictions Action by ASTM / NCWM to address higher ethanol blends Federal / State Legislative & Regulatory Changes Required for Introduction of E15 (2.81 MB) More Documents & Publications Vehicle Certification

  9. Fuel Quality Challenges: An OEM Perspective

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Challenges An OEM Perspective HCD Workshop - Troy, MI Tim McGuire, Fuel Cell, 12June2014 Mercedes-Benz Research & Development North America, Inc Progress * Fuel Specification - SAE J2719 Standard  Reasonable  OEMs in design cycle with specification  Need confidence on delivered H2 * Detection  ASTM  Proprietary * Regulation  NIST Handbook 130 (2012)  California Code of Regulations, Title 4, Division 9, Chapter 6, Article 8, Hydrogen Fuel Mercedes-Benz Research &

  10. Federal Acquisition Circular (FAC) 2005-27 | Department of Energy

    Office of Environmental Management (EM)

    DOE Technical Standards Posted in RevCom for TSP 1 DOE Technical Standards in Reaffirmation 1 DOE Technical Standards Change Notices 1 DOE Technical Standards Published1 Non-Government Standards Actions 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 Publication Staff Roster 2 DOE Technical Standards Program Document Status 01-26-2007 Activity

  11. U.S. Energy Information Administration | State Energy Data 2014: Prices and Expenditures

    Gasoline and Diesel Fuel Update (EIA)

    7 Asphalt: A dark brown-to-black cement-like material obtained by petroleum processing and containing bitumens as the predominant component; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. ASTM: The American Society for Testing and Materials. Aviation gasoline (finished): A complex mixture of

  12. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Other Products Definitions Key Terms Definition Aviation Gasoline A complex mixture of relatively volatile hydrocarbons with or without small quantities of additives, blended to form a fuel suitable for use in aviation reciprocating engines. Fuel specifications are provided in ASTM Specification D 910 and Military Specification MIL-G-5572. Note: Data on blending components are not counted in data on finished aviation gasoline. Gas Plant Operator Any firm, including a gas plant owner, which

  13. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Petroleum Product Prices by Sales Type Definitions Key Terms Definition Aviation Gasoline (Finished) A complex mixture of relatively volatile hydrocarbons with or without small quantities of additives, blended to form a fuel suitable for use in aviation reciprocating engines. Fuel specifications are provided in ASTM Specification D 910 and Military Specification MIL-G-5572. Note: Data on blending components are not counted in data on finished aviation gasoline. Gas Plant Operator Any firm,

  14. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Heating Oil & Propane Prices Definitions Key Terms Definition No. 2 Fuel Oil (Heating Oil) A distillate fuel oil for use in atomizing type burners for domestic heating or for use medium capacity commercial-industrial burner units, with distillation temperatures between 540-640 degrees Fahrenheit at the 90-percent recovery point; and the kinematic viscosities between 1.9-3.4 centistokes at 100 degrees Fahrenheit as defined in ASTM Specification D396-92. Petroleum Administration for Defense

  15. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Prices, Sales Volumes & Stocks by State Definitions Key Terms Definition Aviation Gasoline (Finished) A complex mixture of relatively volatile hydrocarbons with or without small quantities of additives, blended to form a fuel suitable for use in aviation reciprocating engines. Fuel specifications are provided in ASTM Specification D 910 and Military Specification MIL-G-5572. Note: Data on blending components are not counted in data on finished aviation gasoline. Gas Plant Operator Any firm,

  16. Technical Standards Newsletter - May 2008 | Department of Energy

    Office of Environmental Management (EM)

    08 Technical Standards Newsletter - May 2008 Document Status on 04-25-2008 Inside this issue: DOE Standards Actions 1 New Projects and Technical Standards in Revision 1 DOE Technical Standards Posted in RevCom for TSP 1 DOE Technical Standards in Reaffirmation 1 DOE Technical Standards Change Notices 1 DOE Technical Standards Published 1 Non-Government Standards Actions 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2

  17. June

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June June We are your source for reliable, up-to-date news and information; our scientists and engineers can provide technical insights on our innovations for a secure nation. Schematic of artificial retina system Lab team makes unique contributions to the first bionic eye The Argus II will help people blinded by the rare hereditary disease retinitis pigmentosa or seniors suffering from severe macular degeneration. - 6/27/13 Donivan Porterfield Porterfield named ASTM Fellow The award recognizes

  18. Supercritical/Solid Catalyst (SSC)

    SciTech Connect (OSTI)

    2010-01-01

    INL's patented, continuous-flow Supercritical/Solid Catalyst (SSC) produces the highest ASTM-quality B-100 biodiesel from waste fats, oils, and greases at the site of waste generation. SSC delivers low-cost transportation fuel, avoids significant landfill costs for municipalities, and reduces potent methane and other emissions produced in landfills from these wastes. You can learn more about INL's energy research programs at http://www.facebook.com/idahonationallaboratory.

  19. Microsoft Word - z Appendix A to Z sheets for JC.docx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    APPENDIX A Laboratory Report COORDINATED BY:_____________________________ APPROVED BY:____________________ Insulation Group LAB REPORT # 2013092 Abridged ASTM C518 Test Report Page 1 of 3 TITLE: Bally Foam C518 Testing With & Without Metal Skin FILE: Foam DATE: May 23, 2013 PROJECT NO.: 3200 TO: Guy Senter - Bally Refrigerated Boxes REQUESTED BY: Gallagher, Kevin J. CONDUCTED BY: Yuan, Sam PRODUCT IDENTIFICATION: Sample ID Manufacturer Product ID Date Code Product Description 15583 Bally

  20. Upgrading of Biomass Fast Pyrolysis Oil (Bio-oil) Presentation for BETO 2015 Project Peer Review

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Upgrading of Biomass Fast Pyrolysis Oil (Bio-oil) March 22, 2015 Bio-Oil Technology Area Review Principal Investigator : Zia Abdullah Organization: Battelle Memorial Institute 1 Goal Statement * 1,000 hrs. TOS * H/C product 30% blendable with ASTM petroleum fuels * Compatibility with petroleum refining unit operations * Fast Pyrolysis * In-situ catalytic fast pyrolysis * Ex-situ catalytic fast pyrolysis * Hydropyrolysis * Hydrothermal liquefaction * Solvent liquefaction Addresses all FOA-

  1. Hydrogen Pipeline Discussion

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    praxair.com Copyright © 2003, Praxair Technology, Inc. All rights reserved. Hydrogen Pipeline Discussion BY Robert Zawierucha, Kang Xu and Gary Koeppel PRAXAIR TECHNOLOGY CENTER TONAWANDA, NEW YORK DOE Hydrogen Pipeline Workshop Augusta, GA August 2005 2 Introduction Regulatory and technical groups that impact hydrogen and hydrogen systems ASME, DOE, DOT etc, Compressed Gas Association activities ASTM TG G1.06.08 Hydrogen pipelines and CGA-5.6 Selected experience and guidance Summary and

  2. Analysis of CCRL proficiency cements 151 and 152 using the Virtual Cement and Concrete Testing Laboratory

    SciTech Connect (OSTI)

    Bullard, Jeffrey W. . E-mail: jeffrey.bullard@nist.gov; Stutzman, Paul E.

    2006-08-15

    To test the ability of the Virtual Cement and Concrete Testing Laboratory (VCCTL) software to predict cement hydration properties, characterization of mineralogy and phase distribution is necessary. Compositional and textural characteristics of Cement and Concrete Reference Laboratory (CCRL) cements 151 and 152 were determined via scanning electron microscopy (SEM) analysis followed by computer modeling of hydration properties. The general procedure to evaluate a cement is as follows: (1) two-dimensional SEM backscattered electron and X-ray microanalysis images of the cement are obtained, along with a measured particle size distribution (PSD); (2) based on analysis of these images and the measured PSD, three-dimensional microstructures of various water-to-cement ratios are created and hydrated using VCCTL, and (3) the model predictions for degree of hydration under saturated conditions, heat of hydration (ASTM C186), setting time (ASTM C191), and strength development of mortar cubes (ASTM C109) are compared to experimental measurements either performed at NIST or at the participating CCRL proficiency sample evaluation laboratories. For both cements, generally good agreement is observed between the model predictions and the experimental data.

  3. ANALYTICAL RESULTS FOR MOX COLEMANITE CONCRETE SAMPLES RECEIVED ON JANUARY 15, 2013

    SciTech Connect (OSTI)

    Reigel, M.

    2014-05-19

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory (SRNL) is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. SRNL received twelve samples of colemanite concrete for analysis on January 15, 2013. The average total density of each of the samples measured by the ASTM method C 642, the average partial hydrogen density was measured using method ASTM E 1131, and the average partial boron density of each sample was measured according to ASTM C 1301. The lower limits and measured values for the total density, hydrogen partial density, and boron partial density are presented. For all the samples tested, the total density and the hydrogen partial density met or exceeded the specified limit. All of the samples met or exceeded the boron partial density lower bound with the exception of samples G3-M11-2000-H, G3-M11-3000-M, and G5-M1-3000-H which are below the limit of 1.65E-01 g/cm{sup 3}.

  4. ANALYTICAL RESULTS FOR MOX COLEMANITE CONCRETE SAMPLES RECEIVED ON JANUARY 15, 2013

    SciTech Connect (OSTI)

    Reigel, M.; Best, D.

    2013-02-13

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory (SRNL) is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. SRNL received twelve samples of colemanite concrete for analysis on January 15, 2013. The average total density of each of the samples measured by the ASTM method C 642, the average partial hydrogen density was measured using method ASTM E 1311, and the average partial boron density of each sample was measured according to ASTM C 1301. The lower limits and measured values for the total density, hydrogen partial density, and boron partial density are presented. For all the samples tested, the total density and the hydrogen partial density met or exceeded the specified limit. All of the samples met or exceeded the boron partial density lower bound with the exception of samples G3-M11-2000-H, G3-M11-3000-M, and G5-M1-3000-H which are below the limit of 1.65E-01 g/cm3.

  5. ANALYTICAL RESULTS OF MOX COLEMANITE CONCRETE SAMPLE PBC-44.2

    SciTech Connect (OSTI)

    Best, D.; Cozzi, A.; Reigel, M.

    2012-12-20

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. Sample PBC-44.2 was received on 9/20/2012 and analyzed. The average total density measured by the ASTM method C 642 was 2.03 g/cm{sup 3}, within the lower bound of 1.88 g/cm3. The average partial hydrogen density was 6.64E-02 g/cm{sup 3} as measured using method ASTM E 1311 and met the lower bound of 6.04E-02 g/cm{sup 3}. The average measured partial boron density was 1.70E-01 g/cm{sup 3} which met the lower bound of 1.65E-01 g/cm{sup 3} measured by the ASTM C 1301 method.

  6. ANALYTICAL RESULTS OF MOX COLEMANITE CONCRETE SAMPLES POURED AUGUST 29, 2012

    SciTech Connect (OSTI)

    Cozzi, A.; Best, D.; Reigel, M.

    2012-10-30

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. Samples poured 8/29/12 were received on 9/20/2012 and analyzed. The average total density of each of the samples measured by the ASTM method C 642 was within the lower bound of 1.88 g/cm{sup 3}. The average partial hydrogen density of samples 8.6.1, 8.7.1, and 8.5.3 as measured using method ASTM E 1311 met the lower bound of 6.04E-02 g/cm{sup 3}. The average measured partial boron density of each sample met the lower bound of 1.65E-01 g/cm{sup 3} measured by the ASTM C 1301 method. The average partial hydrogen density of samples 8.5.1, 8.6.3, and 8.7.3 did not meet the lower bound. The samples, as received, were not wrapped in a moist towel as previous samples and appeared to be somewhat drier. This may explain the lower hydrogen partial density with respect to previous samples.

  7. ANALYTICAL RESULTS OF MOX COLEMANITE CONCRETE SAMPLES POURED AUGUST 29, 2012

    SciTech Connect (OSTI)

    Best, D.; Cozzi, A.; Reigel, M.

    2012-12-20

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. Samples poured 8/29/12 were received on 9/20/2012 and analyzed. The average total density of each of the samples measured by the ASTM method C 642 was within the lower bound of 1.88 g/cm{sup 3}. The average partial hydrogen density of samples 8.6.1, 8.7.1, and 8.5.3 as measured using method ASTM E 1311 met the lower bound of 6.04E-02 g/cm{sup 3}. The average measured partial boron density of each sample met the lower bound of 1.65E-01 g/cm{sup 3} measured by the ASTM C 1301 method. The average partial hydrogen density of samples 8.5.1, 8.6.3, and 8.7.3 did not meet the lower bound. The samples, as received, were not wrapped in a moist towel as previous samples and appeared to be somewhat drier. This may explain the lower hydrogen partial density with respect to previous samples.

  8. ANALYTICAL RESULTS OF MOX COLEMANITE CONCRETE SAMPLE POURED JULY 25, 2012 - CURED 28 DAYS

    SciTech Connect (OSTI)

    Cozzi, A. D.; Best, D. R.; Reigel, M. M.

    2012-09-18

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use Colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. Samples 8.1.2, 8.2.2, 8.3.2, and 8.4.2 were received on 8/1/2012 and analyzed after curing for 28 days. The average total density measured by the ASTM method C 642 was 2.09 g/cm{sup 3}, within the lower bound of 1.88 g/cm{sup 3}. The average partial hydrogen density was 7.48E-02 g/cm{sup 3} as measured using method ASTM E 1311 and met the lower bound of 6.04E-02 g/cm{sup 3}. The average measured partial boron density was 1.71E-01 g/cm{sup 3} which met the lower bound of 1.65E-01 g/cm{sup 3} measured by the ASTM C 1301 method.

  9. Spreader beam analysis for the CASTOR GSF cask

    SciTech Connect (OSTI)

    Clements, E.P.

    1997-04-07

    The purpose of this report is to document the results of the 150% rated capacity load test performed by DynCorp Hoisting and Rigging on the CASTOR GSF special cask lifting beams. The two lifting beams were originally rated and tested at 20,000kg (44,000lb) by the cask manufacturer in Germany. The testing performed by DynCorp rated and tested the lifting beams to 30,000 kg (66,000 lb) +0%, -5%, for Hanford Site use. The CASTOR GSF cask, used to transport isotopic Heat Sources (canisters), must be lifted with its own designed lifting beam system (Figures 1, 2, and 3). As designed, the beam material is RSt 37-2 (equivalent to American Society for Testing and Materials [ASTM] A-570), the eye plate is St 52-2 (equivalent to ASTM A-516), and the lifting pin is St 50 (equivalent to ASTM A-515). The beam has two opposing 58 mm (2.3 in.) diameter by 120 mm(4.7 in.) length, high grade steel pins that engage the cask for lifting. The pins have a manual locking mechanism to prevent disengagement from the casks. The static, gross weight (loaded) of the cask 18,640 kg (41,000 lb) on the pins prevents movement of the pins during lifting. This is due to the frictional force of the cask on the pins when lifting begins.

  10. Analytical Results Of MOX Colemanite Concrete Sample PBC-44.2

    SciTech Connect (OSTI)

    Cozzi, A. D.; Best, D. R.; Reigel, M. M.

    2012-10-18

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. Sample PBC-44.2 was received on 9/20/2012 and analyzed. The average total density measured by the ASTM method C 642 was 2.03 g/cm{sup 3}, within the lower bound of 1.88 g/cm{sup 3}. The average partial hydrogen density was 6.64E-02 g/cm{sup 3} as measured using method ASTM E 1311 and met the lower bound of 6.04E-02 g/cm{sup 3}. The average measured partial boron density was 1.97E-01 g/cm{sup 3} which met the lower bound of 1.65E-01 g/cm{sup 3} measured by the ASTM C 1301 method.

  11. Solar Park Co Ltd S P | Open Energy Information

    Open Energy Info (EERE)

    Co Ltd S P Jump to: navigation, search Name: Solar & Park Co Ltd (S&P) Place: Gwangju, Korea (Republic) Product: S&P Corp is a metal manufacturer, which owns and operates at least...

  12. Biomass Feedstock Supply Modeling

    Broader source: Energy.gov (indexed) [DOE]

    ... C CO Buf f er C CO Pelletizer 010 R Q Pump SP CO S0 Mov ing pellets C CO Pellet storage C ... R Q Pump C CO Pelletizer SP CO S0 Mov ing pellets C CO Pellet storage SP CO S0 Mov ing to ...

  13. Process for biological material carbon-carbon bond formation

    DOE Patents [OSTI]

    Hollingsworth, R.I.; Jung, S.; Mindock, C.A.

    1998-12-22

    A process for providing vicinal dimethyl long chain between alkyl groups of organic compounds is described. The process uses intact or disrupted cells of various species of bacteria, particularly Thermoanaerobacter sp., Sarcina sp. and Butyrivibrio sp. The process can be conducted in an aqueous reaction mixture at room temperatures. 8 figs.

  14. Process for biological material carbon-carbon bond formation

    DOE Patents [OSTI]

    Hollingsworth, Rawle I.; Jung, Seunho; Mindock, Carol A.

    1998-01-01

    A process for providing vicinal dimethyl long chain between alkyl groups of organic compounds is described. The process uses intact or disrupted cells of various species of bacteria, particularly Thermoanaerobacter sp., Sarcina sp. and Butyrivibrio sp. The process can be conducted in an aqueous reaction mixture at room temperatures.

  15. Final Report, Volume 4, The Develpoment of Qualification Standards forCast Super Duplex Stainless Steel (2507 Wrought Equivalent)

    SciTech Connect (OSTI)

    Hariharan, Vasudevan; Lundin, Carl, D.

    2005-09-30

    The objective of the program is to determine the suitability of ASTM A923 Standard Test methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic-Ferritic Stainless Steels for 25 Cr Cast Super Duplex Stainless Steels (ASTM A890-5A). Different tests were carried out on the materials procured from various steel foundries as stated in the ASTM A923. The foundries were designated as Foundry A, B, C and D. All the materials were foundry solution annealed. Materials from Foundry D were solution heat treated at The University of Tennessee also and then they were subjected to heat treatment schedule which was derived from the testing of wrought DSS to establish the A923 specification. This was possible because the material from the same heat was sufficient for conducting the full scope of heat treatment. This was done prior to carrying out various other tests. Charpy samples were machined. The Ferrite content was measured in all the Charpy samples using Feritscope{reg_sign} and ASTM E562 Manual Point Count Method. After the ferrite content was measured the samples were sent to AMC-Vulcan, Inc. in Alabama to conduct the Charpy impact test based on ASTM A923 Test Method B. This was followed by etch testing and corrosion analysis based on ASTM A923 Test Methods A and C respectively at University of Tennessee. Hardness testing using Rockwell B and C was also carried out on these samples. A correlation was derived between all the three test methods and the best method for evaluating the presence of intermetallic in the material was determined. The ferrite content was correlated with the toughness values. Microstructural analysis was carried out on the etch test samples using Scanning Electron Microscopy in order to determine if intermetallic phases were present. The fracture surfaces from Charpy test specimens were also observed under SEM in order to determine the presence of any cracks and whether it was a brittle or a ductile fracture. A correlation

  16. Final Report, Volume 4, The Development of Qualification Standards for Cast Super Duplex Stainless Steel (2507 Wrought Equivalent)

    SciTech Connect (OSTI)

    Hariharan, Vasudevan; Lundin, Carl, W.

    2005-09-30

    The objective of the program is to determine the suitability of ASTM A923 ???¢????????Standard Test methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic-Ferritic Stainless Steels???¢??????? for 25 Cr Cast Super Duplex Stainless Steels (ASTM A890-5A). Different tests were carried out on the materials procured from various steel foundries as stated in the ASTM A923. The foundries were designated as Foundry A, B, C and D. All the materials were foundry solution annealed. Materials from Foundry D were solution heat treated at The University of Tennessee also and then they were subjected to heat treatment schedule which was derived from the testing of wrought DSS to establish the A923 specification. This was possible because the material from the same heat was sufficient for conducting the full scope of heat treatment. This was done prior to carrying out various other tests. Charpy samples were machined. The Ferrite content was measured in all the Charpy samples using Feritscope???????® and ASTM E562 Manual Point Count Method. After the ferrite content was measured the samples were sent to AMC-Vulcan, Inc. in Alabama to conduct the Charpy impact test based on ASTM A923 Test Method B. This was followed by etch testing and corrosion analysis based on ASTM A923 Test Methods A and C respectively at University of Tennessee. Hardness testing using Rockwell B and C was also carried out on these samples. A correlation was derived between all the three test methods and the best method for evaluating the presence of intermetallic in the material was determined. The ferrite content was correlated with the toughness values. Microstructural analysis was carried out on the etch test samples using Scanning Electron Microscopy in order to determine if intermetallic phases were present. The fracture surfaces from Charpy test specimens were also observed under SEM in order to determine the presence of any cracks and whether

  17. Aerosol Mass Spectrometry via Laser-Induced Incandescence Particle Vaporization Final Report

    SciTech Connect (OSTI)

    Timothy B. Onasch

    2011-10-20

    We have successfully developed and commercialized a soot particle aerosol mass spectrometer (SP-AMS) instrument to measure mass, size, and chemical information of soot particles in ambient environments. The SP-AMS instrument has been calibrated and extensively tested in the laboratory and during initial field studies. The first instrument paper describing the SP-AMS has been submitted for publication in a peer reviewed journal and there are several related papers covering initial field studies and laboratory studies that are in preparation. We have currently sold 5 SP-AMS instruments (either as complete systems or as SP modules to existing AMS instrument operators).

  18. Safety pharmacology Current and emerging concepts

    SciTech Connect (OSTI)

    Hamdam, Junnat; Sethu, Swaminathan; Smith, Trevor; Alfirevic, Ana; Alhaidari, Mohammad; Atkinson, Jeffrey; Ayala, Mimieveshiofuo; Box, Helen; Cross, Michael; Delaunois, Annie; Dermody, Ailsa; Govindappa, Karthik; Guillon, Jean-Michel; Jenkins, Rosalind; Kenna, Gerry; Lemmer, Bjrn; Meecham, Ken; Olayanju, Adedamola; Pestel, Sabine; Rothfuss, Andreas; and others

    2013-12-01

    Safety pharmacology (SP) is an essential part of the drug development process that aims to identify and predict adverse effects prior to clinical trials. SP studies are described in the International Conference on Harmonisation (ICH) S7A and S7B guidelines. The core battery and supplemental SP studies evaluate effects of a new chemical entity (NCE) at both anticipated therapeutic and supra-therapeutic exposures on major organ systems, including cardiovascular, central nervous, respiratory, renal and gastrointestinal. This review outlines the current practices and emerging concepts in SP studies including frontloading, parallel assessment of core battery studies, use of non-standard species, biomarkers, and combining toxicology and SP assessments. Integration of the newer approaches to routine SP studies may significantly enhance the scope of SP by refining and providing mechanistic insight to potential adverse effects associated with test compounds. - Highlights: SP mandatory non-clinical risk assessments performed during drug development. SP organ system studies ensure the safety of clinical participants in FiH trials. Frontloading in SP facilitates lead candidate drug selection. Emerging trends: integrating SP-Toxicological endpoints; combined core battery tests.

  19. Waste Acceptance Testing of Secondary Waste Forms: Cast Stone, Ceramicrete and DuraLith

    SciTech Connect (OSTI)

    Mattigod, Shas V.; Westsik, Joseph H.; Chung, Chul-Woo; Lindberg, Michael J.; Parker, Kent E.

    2011-08-12

    To support the selection of a waste form for the liquid secondary wastes from WTP, Washington River Protection Solutions has initiated secondary-waste-form testing work at Pacific Northwest National Laboratory (PNNL). In anticipation of a down-selection process for a waste form for the Solidification Treatment Unit to be added to the ETF, PNNL is conducting tests on four candidate waste forms to evaluate their ability to meet potential waste acceptance criteria for immobilized secondary wastes that would be placed in the IDF. All three waste forms demonstrated compressive strengths above the minimum 3.45 MPa (500 psi) set as a target for cement-based waste forms. Further, none of the waste forms showed any significant degradation in compressive strength after undergoing thermal cycling (30 cycles in a 10 day period) between -40 C and 60 C or water immersion for 90 days. The three leach test methods are intended to measure the diffusion rates of contaminants from the waste forms. Results are reported in terms of diffusion coefficients and a leachability index (LI) calculated based on the diffusion coefficients. A smaller diffusion coefficient and a larger LI are desired. The NRC, in its Waste Form Technical Position (NRC 1991), provides recommendations and guidance regarding methods to demonstrate waste stability for land disposal of radioactive waste. Included is a recommendation to conduct leach tests using the ANS 16.1 method. The resulting leachability index (LI) should be greater than 6.0. For Hanford secondary wastes, the LI > 6.0 criterion applies to sodium leached from the waste form. For technetium and iodine, higher targets of LI > 9 for Tc and LI > 11 for iodine have been set based on early waste-disposal risk and performance assessment analyses. The results of these three leach tests conducted for a total time between 11days (ASTM C1308) to 90 days (ANS 16.1) showed: (1) Technetium diffusivity: ANSI/ANS 16.1, ASTM C1308, and EPA 1315 tests indicated that

  20. Analysis of selected trace metals in leachate from reference fly ash. Phase II. Supplemental leaching program. Final report

    SciTech Connect (OSTI)

    Webster, W.C.; Jackson, K.F.; Paule, R.C.

    1981-03-01

    An inter-laboratory testing program was conducted to isolate and measure the primary components of variability in the American Society for Testing and Materials' (ASTM) and Environmental Protection Agency's (EPA) extraction procedures for testing the leaching potential of solid wastes. The program is a continuation of the Collaborative Test Programs undertaken jointly by ASTM Subcommittee D19.12 and the US Department of Energy (DOE). The National Bureau of Standards was retained by DOE to design the program and analyze the results. Engineering-Science provided initial program coordination, and Webster and Associates coodinated the data analysis and preparation of the report, both under contract to DOE. Thirteen laboratories participated in the program, all on a voluntary basis. In carrying out the program, specially prepared samples of a Reference Fly Ash were utilized in order to minimize sample heterogeneity. Each laboratory preformed both the ASTM and EPA extraction procedures on the Reference Fly Ash in duplicate, split the extract into two equal portions, completed duplicate analytical determinations on one portion, and shipped the other portion to a central laboratory. The central laboratory performed duplicate analytical determinations on all extracts. The main observations and conclusions from the test program are: (1) sampling may be a large variable in field situations; however, with the use of the Reference Fly Ash, sample heterogeneity was controlled, allowing analysis of effects other than sampling variability; (2) the cooperating laboratories demonstrated acceptable analytical reproducibility based on analytical quality control data; (3) poor reproducibility of the trace metal results on the extracts from the Reference Fly Ash was shown to be primarily due to variability in the leaching process rather than analytical technique.

  1. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Biodiesel Sales Requirements It is unlawful for any person to sell, offer for sale, assist in the sale of, deliver, or permit to be sold or offered for sale any biodiesel, biomass-based diesel, or biomass-based diesel blend unless it meets applicable registration requirements for fuels and additives. Biodiesel must meet Title 40 of the U.S. Code of Federal Regulations, section 79, and ASTM Standard D6751. Biomass-based diesel and biomass-based diesel blends must meet the requirements in Title 42

  2. PUNCTURE TEST CHARACTERIZATION OF GLOVEBOX GLOVES

    SciTech Connect (OSTI)

    Korinko, P.; Chapman, G.

    2012-02-29

    An experiment was conducted to determine the puncture resistance of 15 gloves that are used or proposed for use in the Tritium Facility at Savannah River Site (SRS). These data will serve as a baseline for characterization and may be incorporated into the glove procurement specification. The testing was conducted in agreement with ASTM D120 and all of the gloves met or exceeded the minimum requirements. Butyl gloves exhibited puncture resistance nearly 2.5 times the minimum requirements at SRS while Polyurethane was nearly 7.5x the minimum.

  3. Fuel Properties Database from the Alternative Fuels and Advanced Vehicles Data Center (AFDC)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    This database contains information on advanced petroleum and non-petroleum based fuels, as well as key data on advanced compression ignition fuels. Included are data on physical, chemical, operational, environmental, safety, and health properties. These data result from tests conducted according to standard methods (mostly American Society for Testing and Materials (ASTM). The source and test methods for each fuel data set are provided with the information. The database can be searched in various ways and can output numbers or explanatory text. Heavy vehicle chassis emission data are also available for some fuels.

  4. ANALYTICAL RESULTS FOR MOX COLEMANITE SAMPLES RECEIVED ON JULY 22, 2013

    SciTech Connect (OSTI)

    Reigel, M.; Best, D.

    2014-05-19

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory (SRNL) is tasked with measuring the boron oxide content of the colemanite raw aggregate material prior to it being mixed into the concrete. SRNL received ten samples of colemanite for analysis on July 22, 2013. The elemental boron content of each sample was measured according to ASTM C 1301. The boron oxide content was calculated using the oxide conversion factor for boron.

  5. ANALYTICAL RESULTS FOR MOX COLEMANITE SAMPLES RECEIVED ON JULY 22, 2013

    SciTech Connect (OSTI)

    Reigel, M.; Best, D.

    2013-08-13

    The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory (SRNL) is tasked with measuring the boron oxide content of the colemanite raw aggregate material prior to it being mixed into the concrete. SRNL received ten samples of colemanite for analysis on July 22, 2013. The elemental boron content of each sample was measured according to ASTM C 1301. The boron oxide content was calculated using the oxide conversion factor for boron.

  6. Review of the Palisades pressure vessel accumulated fluence estimate and of the least squares methodology employed

    SciTech Connect (OSTI)

    Griffin, P.J.

    1998-05-01

    This report provides a review of the Palisades submittal to the Nuclear Regulatory Commission requesting endorsement of their accumulated neutron fluence estimates based on a least squares adjustment methodology. This review highlights some minor issues in the applied methodology and provides some recommendations for future work. The overall conclusion is that the Palisades fluence estimation methodology provides a reasonable approach to a {open_quotes}best estimate{close_quotes} of the accumulated pressure vessel neutron fluence and is consistent with the state-of-the-art analysis as detailed in community consensus ASTM standards.

  7. Influence of microstructure on the corrosion resistance of AISI type 304L and type 316L sintered stainless steels exposed to ferric chloride solution

    SciTech Connect (OSTI)

    Otero, E.; Pardo, A.; Utrilla, M.V.; Perez, F.J.; Saenz, E.

    1995-10-01

    The corrosion behavior of type 304L and type 316L austenitic stainless steels, produced by powder metallurgy, when exposed to a ferric chloride solution was studied. The exposures were conducted according to ASTM G48-76, Method A. The influence of ferric chloride concentration and exposure temperature on the corrosion kinetics of these materials was evaluated. A mechanism is proposed to explain the associated morphology observed in the microstructures produced after exposure of these P/M alloys to the aggressive medium.

  8. Sensitivity of silicon 1-MeV damage function to cross-section evaluation

    SciTech Connect (OSTI)

    Griffin, P.J.; Danjaji, M.B.

    1995-12-31

    The electronics radiation hardness-testing community uses the American Society for Testing and Materials (ASTM) E722-93 Standard Practice to define the energy dependence of the nonionizing neutron damage to silicon semiconductors. This neutron displacement damage response function is defined to be equal to the silicon displacement kerma. An Oak Ridge National Laboratory (ORNL) {sup 28}Si cross-section evaluation and the NJOY code are used to define the standard response function to be used in reporting 1-MeV (silicon) neutron damage and in determining neutron damage equivalence between test facilities. This paper provides information for the precision and bias section of the E722 standard.

  9. Increasing Class C fly ash reduces alkali silica reactivity

    SciTech Connect (OSTI)

    Hicks, J.K.

    2007-07-01

    Contrary to earlier studies, it has been found that incremental additions of Class C fly ash do reduce alkali silica reactivity (ASR), in highly reactive, high alkali concrete mixes. AST can be further reduced by substituting 5% metakaolin or silica fume for the aggregate in concrete mixes with high (more than 30%) Class C fly ash substitution. The paper reports results of studies using Class C fly ash from the Labadie Station plant in Missouri which typically has between 1.3 and 1.45% available alkalis by ASTM C311. 7 figs.

  10. The effect of copper slag on the hydration and mechanical properties of cementitious mixtures

    SciTech Connect (OSTI)

    Tixier, R.; Devaguptapu, R.; Mobasher, B.

    1997-10-01

    The effect of copper slag on the hydration of cement-based materials is studied. Up to 15% by weight of copper slag was used as a portland cement replacement. Hydration reactions were studied through semiquantitative X-ray diffraction and TGA/DTA. Samples of copper slag and hydrated lime (ASTM type S) were used to test the pozzolanic properties of the slag. The porosity was examined using mercury intrusion porosimetry. A decrease in capillary porosity was observed while the gel porosity was increased. A significant increase in the compressive strength for up to 1 year is observed.

  11. Hydrofining of Athabasca derived heavy gas oil over Ni-W and Co-Mo catalysts

    SciTech Connect (OSTI)

    Mann, R.S.; Diaz-real, R.

    1987-01-01

    The hydrotreatment of heavy gas oil derived from Athabasca bitumen was studied in a trickle bed reactor over Ni-W and Co-Mo zeolite catalyst at 350-425/sup 0/C, 3.55 to 10.44 MPa, and LHSV of 1-4. The effects of temperature and liquid flow rates on the product were investigated. ASTM distillation, aniline point, viscosities and densities of the product oil were measured and correlated with various parameters. Activity of the catalysts for hydrodenitrogenation is compared.

  12. SRC-I demonstration plant analytical laboratory methods manual. Final technical report

    SciTech Connect (OSTI)

    Klusaritz, M.L.; Tewari, K.C.; Tiedge, W.F.; Skinner, R.W.; Znaimer, S.

    1983-03-01

    This manual is a compilation of analytical procedures required for operation of a Solvent-Refined Coal (SRC-I) demonstration or commercial plant. Each method reproduced in full includes a detailed procedure, a list of equipment and reagents, safety precautions, and, where possible, a precision statement. Procedures for the laboratory's environmental and industrial hygiene modules are not included. Required American Society for Testing and Materials (ASTM) methods are cited, and ICRC's suggested modifications to these methods for handling coal-derived products are provided.

  13. U.S. Energy Information Administration | State Energy Data 2014: Consumption

    Gasoline and Diesel Fuel Update (EIA)

    5 Glossary G L O S S A R Y Asphalt: A dark brown-to-black cement-like material obtained by petro- leum processing and containing bitumens as the predominant component; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. ASTM:

  14. Microsoft Word - DOE-ID-13-001 General Atomics EC B3-6.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 SECTION A. Project Title: Development of ASTM Standard for SiC-SiC Joint Testing - General Atomics SECTION B. Project Description General Atomics (GA) proposes to develop an instrumented test rig and standard test method to measure the strength of joints between cylindrical SiC-SiC tubing and endplugs at elevated, reactor-relevant temperatures. The test will be an endplug pushout method in which an axial load is applied to the internal surface of the endplug while the outer tubular ceramic

  15. Status of Legislative & Regulatory Developments Marilyn J. Herman President, Herman & Associates RFG Survey Association Annual Board of Directors Meeting July 23, 2009

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Marilyn J. Herman President, Herman & Associates SAE Government and Industry Meeting Washington, DC January 27, 2011 2 EPA Waiver Decision E15 Implementation Issues Federal and State Blending Restrictions Action by ASTM / NCWM to address higher ethanol blends 3 October 13, 2010 - EPA granted partial waiver for E15 in MY 2007 and newer light duty vehicles January 21, 2011 - EPA granted partial waiver for E15 in MY 2001-2006 light duty vehicles Did not approve E15 for older vehicles (pre-2001)

  16. Effect of specimen size on the fracture toughness of V-4Cr-4Ti

    SciTech Connect (OSTI)

    Kurtz, R.J.; Jones, R.H.; Li, Huaxin

    1996-04-01

    J-R curves were generated using the single specimen unload-compliance technique on four specimens of V-4Cr-4Ti to determine the effect of specimen dimensions on the fracture behavior. Ductile crack initiation and growth was observed in the 6.35 mm thick specimens but not in the 12.70 mm thick specimens. The J-R curves determined from these tests were not valid per ASTM validity criteria so quantitative measures of the resistance to ductile crack initiation and growth were not obtained. These data suggests that standard fracture toughness tests were performed with small-scale DCT specimens may also not be valid.

  17. U.S. Energy Information Administration | Petroleum Marketing Monthly

    U.S. Energy Information Administration (EIA) Indexed Site

    Glossary API gravity: An arbitrary scale expressing the gravity or density of liquid petroleum products. The measuring scale is calibrated in terms of degrees API; it may be calculated in terms of the following formula: The higher the API gravity, the lighter the compound. Light crudes generally exceed 38 degrees API and heavy crudes are commonly labeled as all crudes with an API gravity of 22 degrees or below. Intermediate crudes fall in the range of 22 degrees to 38 degrees API gravity. ASTM:

  18. RADIOACTIVE HIGH LEVEL WASTE TANK PITTING PREDICTIONS: AN INVESTIGATION INTO CRITICAL SOLUTION CONCENTRATIONS

    SciTech Connect (OSTI)

    Hoffman, E.

    2012-11-08

    A series of cyclic potentiodynamic polarization tests was performed on samples of ASTM A537 carbon steel in support of a probability-based approach to evaluate the effect of chloride and sulfate on corrosion the steel's susceptibility to pitting corrosion. Testing solutions were chosen to systemically evaluate the influence of the secondary aggressive species, chloride, and sulfate, in the nitrate based, high-level wastes. The results suggest that evaluating the combined effect of all aggressive species, nitrate, chloride, and sulfate, provides a consistent response for determining corrosion susceptibility. The results of this work emphasize the importance for not only nitrate concentration limits, but also chloride and sulfate concentration limits.

  19. Arctic Energy Technology Development Laboratory (Part 3)

    SciTech Connect (OSTI)

    See OSTI ID Number 960443

    2008-12-31

    Various laboratory tests were carried at the R & D facility of BJ Services in Tomball, TX with BJ Services staff to predict and evaluate the performance of the Ceramicrete slurry for its effective use in permafrost cementing operations. Although other standards such as those of the American Standard for Testing Materials (ASTM) and Construction Specification Institute (CSI) exist, all these tests were standardized by the API. A summary of the tests traditionally used in the cement slurry design as well as the API tests reference document are provided in Table 7. All of these tests were performed within the scope of this research to evaluate properties of the Ceramicrete.

  20. FY 2016 Overall Contract and Project Management Improvement Performance

    Energy Savers [EERE]

    PERFORMANCE APPRAISAL CYCLE - CLOSEOUT GUIDANCE | Department of Energy 5 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL (SP) PERFORMANCE APPRAISAL CYCLE - CLOSEOUT GUIDANCE FY 2015 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL (SP) PERFORMANCE APPRAISAL CYCLE - CLOSEOUT GUIDANCE The FY 2015 performance appraisal cycle for both SES and SP members, which includes Senior Level (SL) and Scientific or Professional (ST) employees, concluded on September 30, 2015. In order to

  1. FY17 SBIR Phase I Release 1 FOA Released: Includes Fuel Cell Catalysts and

    Energy Savers [EERE]

    PERFORMANCE APPRAISAL OPENING GUIDANCE | Department of Energy 6 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL (SP) PERFORMANCE APPRAISAL OPENING GUIDANCE FY 2016 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL (SP) PERFORMANCE APPRAISAL OPENING GUIDANCE FY 2016 performance appraisal cycle for both SES and SP members, which includes Senior Level (SL) and Scientific or Professional (ST) employees, concludes on December 15, 2015. These documents provide a detailed overview of

  2. Dr. Oliver Simpson Metallurgical Laboratory

    Office of Legacy Management (LM)

    Oliver Simpson Metallurgical Laboratory p. 0. Box 5207 Chicago DO, Illinola ~. : Dear Dr. Simpson: Since your telephone call of's week ago regarding a possible 5000 pound order for regular rotary fired SP beryllium oxide for AC Spark Plug Company, Flint, Michigan,, we have been .busv reviewring our production achodules and have now established the-following~schedule eon SP beryllium oxide production: Vie plan to' commence pr.oducMon of SP beryllLum oxide on September 16 and expect to pounds

  3. T-546: Microsoft MHTML Input Validation Hole May Permit Cross-Site

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Scripting Attacks Arbitrary Code | Department of Energy 6: Microsoft MHTML Input Validation Hole May Permit Cross-Site Scripting Attacks Arbitrary Code T-546: Microsoft MHTML Input Validation Hole May Permit Cross-Site Scripting Attacks Arbitrary Code January 31, 2011 - 7:00am Addthis PROBLEM: Microsoft MHTML Input Validation Hole May Permit Cross-Site Scripting Attacks Arbitrary Code. PLATFORM: Microsoft 2003 SP2, Vista SP2, 2008 SP2, XP SP3, 7; and prior service packs ABSTRACT: A

  4. SSGSS: THE SPITZER-SDSS-GALEX SPECTROSCOPIC SURVEY (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    MD 21218 (United States) NAT, Universidade Cruzeiro do Sul, 868 Sao Paulo, SP (Brazil) Observatories of the Carnegie Institution of Washington, Pasadena, CA 91101 (United ...

  5. Patent Record Announcement | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exceptional technology that's not yet commercialized, but is viewed as a potential market game-changer, for Signa SP MRI Magnet; a Coolidge Fellowship Award in 1998, the...

  6. Well Log Techniques At Raft River Geothermal Area (1977) | Open...

    Open Energy Info (EERE)

    the rock using well log data. Notes Information is given on the following logs: dual-induction focused log, including resistivity, sp, and conductivity; acoustic log; compensated...

  7. EM Corporate QA Performance Metrics | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    QA Corporate Board Meeting - November 2008 Instructions for EM Corporate Performance Metrics FY 2015 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL (SP) PERFORMANCE ...

  8. FY 2015 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL...

    Broader source: Energy.gov (indexed) [DOE]

    The FY 2015 performance appraisal cycle for both SES and SP members, which includes Senior Level (SL) and Scientific or Professional (ST) employees, concluded on September 30, ...

  9. Orpinomyces xylanase proteins and coding sequences

    DOE Patents [OSTI]

    Li, Xin-Liang; Ljungdahl, Lars G.; Chen, Huizhong

    1998-01-01

    Xylanases having high specific activities from Orpinomyces sp. strain PC-2 are provided as well as methods for their purification. DNA sequences encoding these proteins are also provided.

  10. Biomass Boiler Market is Projected to Reach USD 8,907.0 Million...

    Open Energy Info (EERE)

    Naval SpA, Hurst Boiler & Welding Co, Inc., Jernforsen Energi System AB, Justsen Energiteknik AS, Kohlbach Group, LAMBION Energy Solutions GmbH, Leroux & Lotz Technologies,...

  11. Washington's 2nd congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Biofuels LLC Energy Generation Facilities in Washington's 2nd congressional district S.P. Everett Biomass Facility Utility Companies in Washington's 2nd congressional district...

  12. A=12O (1975AJ02)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    75AJ02) (Not illustrated) This nucleus has not been observed: see (1968AJ02, 1972WA07, 1973SP1A, 1974IR04

  13. POLICY MEMORANDUM #1 Policy and Operating Procedures for Senior...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SES Performance Management System Policy and Operating Procedures FY 2015 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL (SP) PERFORMANCE APPRAISAL CYCLE - CLOSEOUT ...

  14. Performance Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The FY 2015 performance appraisal cycle for both SES and SP members, which ... June 5, 2015 SES Performance Management System Policy and Operating Procedures The SES ...

  15. FY 2015 Senior Executive Service (SES) and Senior Professional...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2014 Senior Executive Service (SES) and Senior Professional (SP) Performance Appraisal Cycle - Closeout Guidance SES Performance Management System Policy and Operating Procedures

  16. FY 2014 Senior Executive Service (SES) and Senior Professional...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FY 2015 SENIOR EXECUTIVE SERVICE (SES) AND SENIOR PROFESSIONAL (SP) PERFORMANCE APPRAISAL CYCLE - CLOSEOUT GUIDANCE SES Performance Management System Policy and Operating ...

  17. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    The dosimetric parameters Sc, Sp and TPR vary depending on radio, the transmission effect of the MLC, inverse square law and dose profile are used for the calculation....

  18. Supporting technology for enhanced oil recovery for thermal processes

    SciTech Connect (OSTI)

    Reid, T.B.; Bolivar, J.

    1997-12-01

    This report contains the results of efforts under the six tasks of the Ninth Amendment and Extension of Annex IV, Enhanced Oil Recovery Thermal Processes of the Venezuela/USA Agreement. The report is presented in sections (for each of the 6 tasks) and each section contains one or more reports prepared by various individuals or groups describing the results of efforts under each of the tasks. A statement of each task, taken from the agreement, is presented on the first page of each section. The tasks are numbered 62 through 67. The first, second, third, fourth fifth, sixth, seventh, eighth, and ninth reports on Annex IV, [Venezuela MEM/USA-DOE Fossil Energy Report IV-1, IV-2, IV-3, IV-4, IV-5, IV-6, IV-7, and IV-8 (DOE/BETC/SP-83/15, DOE/BC-84/6/SP, DOE/BC-86/2/SP, DOE/BC-87/2/SP, DOE/BC-90/1/SP, DOE/BC-90/1/SP) (DOE/BC-92/1/SP, DOE/BC-93/3/SP, and DOE/BC-95/3/SP)] contain the results from the first 61 tasks. Those reports are dated April 1983, August 1984, March 1986, July 1987, November 1988, October 1991, February 1993, and March 1995 respectively.

  19. Supporting Technology for Enhanced Oil Recovery-EOR Thermal Processes Report IV-12

    SciTech Connect (OSTI)

    Izequeido, Alexandor

    2001-04-01

    This report contains the results of efforts under the six tasks of the Ninth Amendment and Extension of Annex IV, Enhanced Oil Recovery Thermal Processes of the Venezuela/USA Agreement. The report is presented in sections (for each of the 6 tasks) and each section contains one or more reports prepared by various individuals or groups describing the results of efforts under each of the tasks. A statement of each task, taken from the agreement, is presented on the first page of each section. The tasks are numbered 62 through 67. The first, second, third, fourth, fifth, sixth, seventh, eight, and ninth reports on Annex IV, [Venezuela MEM/USA-DOE Fossil Energy Report IV-1, IV-2, IV-3, IV-4, IV-5, IV-6, IV-7, and IV-8 (DOE/BETC/SP-83/15, DOE/BC-84/6/SP, DOE/BC-86/2/SP, DOE/BC-87/2/SP, DOE/BC-89/1/SP, DOE/BC-90/1/SP) DOE/BC-92/1/SP, DOE/BC-93/3/SP, and DOE/BC-95/3/SP] contain the results from the first 61 tasks. Those reports are dated April 1983, August 1984, March 1986, July 1! 987, November 1988, December 1989, October 1991, February 1993, and March 1995 respectively.

  20. Advanced Leds | Open Energy Information

    Open Energy Info (EERE)

    Place: Coventry, England, United Kingdom Zip: CV5 6SP Product: Advanced Leds develops LED technology for outdoor lighting, including street lighting applications. Coordinates:...

  1. History and Results of Surface Exploration in the Kilauea East...

    Open Energy Info (EERE)

    (SP) surveys, possibly resistivity soundings, and soil gas surveys. Authors Murray C. Gardner, James R. McNitt, Christopher W. Klein, James B. Koenig and Dean Nakano...

  2. Efficient Use of Algal Biomass Residues for Biopower Production...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... * Demonstrate 20% replacement of chemical nitrogen with <10% impact on growth rate ... Nannochloropsis sp. (Seambiotic) * Green alga: Chlorella vulgaris UTEX 395 (NREL ...

  3. 2002 User Survey Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    recommendations NERSC did the following: Improved debug and interactive turnaround during prime time by setting aside 5% of the SP compute pool for interactive and debug jobs from...

  4. Time-Resolved Study of Bonding in Liquid Carbon

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    spectrum of carbon-60, the researchers were able to establish that low-density liquid carbon contains predominantly twofold-coordinated chain structures (sp hybridization). As...

  5. T-578: Vulnerability in MHTML Could Allow Information Disclosure |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 8: Vulnerability in MHTML Could Allow Information Disclosure T-578: Vulnerability in MHTML Could Allow Information Disclosure March 15, 2011 - 3:05pm Addthis PROBLEM: Microsoft Windows is prone to a vulnerability that may allow attackers to inject arbitrary script code into the current browser session. PLATFORM: Windows 2003 SP2, Vista SP2, 2008 SP2, XP SP3, 7; and prior service packs ABSTRACT: A vulnerability was reported in Microsoft MHTML. A remote user can conduct

  6. Friends of Berkeley Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Map Contact Member Spotlight sp3 Nanocarriers May Carry New Hope for Brain Cancer Therapy Berkeley Lab researchers have developed a new family of nanocarriers, called...

  7. Cellulose-Enriched Microbial Communities from Leaf-Cutter Ant...

    Office of Scientific and Technical Information (OSTI)

    ... PF, Martfnez-Molina E, Velazquez E. Paenibacillus cellulosilyticus sp. nov., a cellulolytic and xylanolytic bacterium isolated from the bract phyllosphere of Phoenix dactyli- fera. ...

  8. Self Potential At Mt Princeton Hot Springs Geothermal Area (Richards...

    Open Energy Info (EERE)

    groundwater flux patterns Notes Researchers collected 2700 SP measurements. Equilibrium temperature data from wells and shallow (305 cm) holes was correlated to geoelectrical...

  9. Adventive Hydrothermal Circulation On Stromboli Volcano (Aeolian...

    Open Energy Info (EERE)

    on May 2008 a multidisciplinary study involving Electrical Resistivity Tomography (ERT), Ground Penetrating Radar (GPR), Self-Potential (SP), CO2 soil diffuse degassing and soil...

  10. Direct-Current Resistivity Survey At Blue Mountain Area (Fairbank...

    Open Energy Info (EERE)

    have been conducted specifically for the geothermal program at Blue Mountain include a self-potential (SP) survey, and additional IPelectrical resistivity traversing. These...

  11. Polo Nacional de Biocombustiveis Brazilian Biofuels Programme...

    Open Energy Info (EERE)

    Nacional de Biocombustiveis Brazilian Biofuels Programme Jump to: navigation, search Name: Polo Nacional de Biocombustiveis (Brazilian Biofuels Programme) Place: Piracicaba (SP),...

  12. Biocapital | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Biocapital Place: CharqueadaSP, Brazil Sector: Biofuels Product: Brazilian biodiesel producer which operates as a biofuels distributor and...

  13. ANALYTIC EXPRESSIONS FOR THE LIGHT-SCATTERING CROSS SECTION

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of r and m, with many "wiggles" on many scales, and its computation, though straightforward, is time intensive. A simple expression for Q sp would simplify calculation of...

  14. Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of performance between the SP and UCLA's own Appleseed cluster of G4 Macintosh computers will also be presented. Kernel and Application Code Performance for a Spectral...

  15. Learning How Bacteria Communicate | U.S. DOE Office of Science...

    Office of Science (SC) Website

    and other microbes influence or communicate with each other by exchanging molecules could provide insights useful for advancing sustainable bioenergy. Summary Synechococcus sp. ...

  16. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    sp. Fw109-5, isolated from nitrate- and uranium-contaminated subsurface sediment of the Oak Ridge Integrated Field-Scale Subsurface Research Challenge (IFC) site, Oak...

  17. Microsoft Word - Mn.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the identities of manganese oxides formed in sea water by the marine bacterium, Bacillus sp., strain SG-1. Both techniques provide information regarding the molecular-scale...

  18. Office\tof\tExecutive\tResources Office\tof\tthe\tChief\tHuman\tCapital...

    Broader source: Energy.gov (indexed) [DOE]

    Office of Executive Resources Office of the Chief Human Capital Officer U.S. Department of Energy FY 2015 Senior Executive Service (SES) and Senior Professional (SP) Performance ...

  19. Measuring bio-oil upgrade intermediates and corrosive species with polarity-matched analytical approaches

    SciTech Connect (OSTI)

    Connatser, Raynella M.; Lewis, Sr., Samuel Arthur; Keiser, James R.; Choi, Jae -Soon

    2014-10-03

    Integrating biofuels with conventional petroleum products requires improvements in processing to increase blendability with existing fuels. This work demonstrates analysis techniques for more hydrophilic bio-oil liquids that give improved quantitative and qualitative description of the total acid content and organic acid profiles. To protect infrastructure from damage and reduce the cost associated with upgrading, accurate determination of acid content and representative chemical compound analysis are central imperatives to assessing both the corrosivity and the progress toward removing oxygen and acidity in processed biomass liquids. Established techniques form an ample basis for bio-liquids evaluation. However, early in the upgrading process, the unique physical phases and varied hydrophilicity of many pyrolysis liquids can render analytical methods originally designed for use in petroleum-derived oils inadequate. In this work, the water solubility of the organic acids present in bio-oils is exploited in a novel extraction and titration technique followed by analysis on the water-based capillary electrophoresis (CE) platform. The modification of ASTM D664, the standard for Total Acid Number (TAN), to include aqueous carrier solvents improves the utility of that approach for quantifying acid content in hydrophilic bio-oils. Termed AMTAN (modified Total Acid Number), this technique offers 1.2% relative standard deviation and dynamic range comparable to the conventional ASTM method. Furthermore, the results of corrosion product evaluations using several different sources of real bio-oil are discussed in the context of the unique AMTAN and CE analytical approaches developed to facilitate those measurements.

  20. Quality Parameters and Chemical Analysis for Biodiesel Produced in the United States in 2011

    SciTech Connect (OSTI)

    Alleman, T. L.; Fouts, L.; Chupka, G.

    2013-03-01

    Samples of biodiesel (B100) from producers and terminals in 2011were tested for critical properties: free and total glycerin, flash point, cloud point, oxidation stability, cold soak filterability, and metals. Failure rates for cold soak filterability and oxidation stability were below 5%. One sample failed flash point due to excess methanol. One sample failed oxidation stability and metal content. Overall, 95% of the samples from this survey met biodiesel quality specification ASTM D6751. In 2007, a sampling of B100 from production facilities showed that nearly 90% met D6751. In samples meeting D6751, calcium was found above the method detection limit in nearly half the samples. Feedstock analysis revealed half the biodiesel was produced from soy and half was from mixed feedstocks. The saturated fatty acid methyl ester concentration of the B100 was compared to the saturated monoglyceride concentration as a percent of total monoglyceride. The real-world correlation of these properties was very good. The results of liquid chromatograph measurement of monoglycerides were compared to ASTM D6751. Agreement between the two methods was good, particularly for total monoglycerides and unsaturated monoglycerides. Because only very low levels of saturated monoglycerides measured, the two methods had more variability, but the correlation was still acceptable.

  1. Nondestructive characterization of embrittlement in reactor pressure vessel steels -- A feasibility study

    SciTech Connect (OSTI)

    McHenry, H.I.; Alers, G.A.

    1998-03-01

    The Nuclear Regulatory Commission recently initiated a study by NIST to assess the feasibility of using physical-property measurements for evaluating radiation embrittlement in reactor pressure vessel (RPV) steels. Ultrasonic and magnetic measurements provide the most promising approaches for nondestructive characterization of RPV steels because elastic waves and magnetic fields can sense the microstructural changes that embrittle materials. The microstructural changes of particular interest are copper precipitation hardening, which is the likely cause of radiation embrittlement in RPV steels, and the loss of dislocation mobility that is an attribute of the ductile-to-brittle transition. Measurements were made on a 1% copper steel, ASTM grade A710, in the annealed, peak-aged and overaged conditions, and on an RPV steel, ASTM grade A533B. Nonlinear ultrasonic and micromagnetic techniques were the most promising measures of precipitation hardening. Ultrasonic velocity measurements and the magnetic properties associated with hysteresis-loop measurements were not particularly sensitive to either precipitation hardening or the ductile-to-brittle transition. Measurements of internal friction using trapped ultrasonic resonance modes detected energy losses due to the motion of pinned dislocations; however, the ultrasonic attenuation associated with these measurements was small compared to the attenuation caused by beam spreading that would occur in conventional ultrasonic testing of RPVs.

  2. Automation of mechanical testing

    SciTech Connect (OSTI)

    Heberling, D.T.

    1993-01-01

    This publication, Automation of Mechanical Testing, contains papers presented at the symposium of the same name, held in Pittsburgh, PA on 21 May 1992. The symposium was sponsored by ASTM Committee E-28 on Mechanical Testing. David T. Heberling, Armco Steel Co., L.P., Middletown Works Metallurgical Laboratory, Middletown, OH, presided as symposium chairman and is editor of the resulting publication. Hopefully, the initial flurry of activity has now subsided enough that the 90s can be a decade of maturing and standardization of automated test procedures. To help achieve this goal, the authors present in this STP nine technical papers on the automation of mechanical testing. The first five form a primer for those preparing to implement automated testing. These papers consist of information obtained the hard way--from experience with automation projects. Beginning with the fifth, which fits into both categories, the papers focus on specific technical issues and topics, many of which affect or need to be addressed by ASTM standards.

  3. THE PRODUCT CONSISTENCY TEST HOW AND WHY IT WAS DEVELOPED

    SciTech Connect (OSTI)

    Jantzen, C; Ned Bibler, N

    2008-12-15

    The Product Consistency Test (PCT), American Society for Testing Materials (ASTM) Standard C1285, is currently used world wide for testing glass and glass-ceramic waste forms for high level waste (HLW), low level waste (LLW), and hazardous wastes. Development of the PCT was initiated in 1986 because HLW glass waste forms required extensive characterization before actual production began and required continued characterization during production ({ge}25 years). Non-radioactive startup was in 1994 and radioactive startup was in 1996. The PCT underwent extensive development from 1986-1994 and became an ASTM consensus standard in 1994. During the extensive laboratory testing and inter- and intra-laboratory round robins using non-radioactive and radioactive glasses, the PCT was shown to be very reproducible, to yield reliable results rapidly, to distinguish between glasses of different durability and homogeneity, and to easily be performed in shielded cell facilities with radioactive samples. In 1997, the scope was broadened to include hazardous and mixed (radioactive and hazardous) waste glasses. In 2002, the scope was broadened to include glass-ceramic waste forms which are currently being recommended for second generation nuclear wastes yet to be generated in the nuclear renaissance. Since the PCT has proven useful for glass-ceramics with up to 75% ceramic component and has been used to evaluate Pu ceramic waste forms, the use of this test for other ceramic/mineral waste forms such as geopolymers, hydroceramics, and fluidized bed steam reformer mineralized product is under investigation.

  4. Duct Leakage Repeatability Testing

    SciTech Connect (OSTI)

    Walker, Iain; Sherman, Max

    2014-01-01

    Duct leakage often needs to be measured to demonstrate compliance with requirements or to determine energy or Indoor Air Quality (IAQ) impacts. Testing is often done using standards such as ASTM E1554 (ASTM 2013) or California Title 24 (California Energy Commission 2013 & 2013b), but there are several choices of methods available within the accepted standards. Determining which method to use or not use requires an evaluation of those methods in the context of the particular needs. Three factors that are important considerations are the cost of the measurement, the accuracy of the measurement and the repeatability of the measurement. The purpose of this report is to evaluate the repeatability of the three most significant measurement techniques using data from the literature and recently obtained field data. We will also briefly discuss the first two factors. The main question to be answered by this study is to determine if differences in the repeatability of these tests methods is sufficient to indicate that any of these methods is so poor that it should be excluded from consideration as an allowed procedure in codes and standards.

  5. An investigation of the radiolytic stability of a resorcinol- formaldehyde ion exchange resin

    SciTech Connect (OSTI)

    Crawford, C.L.; Bibler, N.E.; Bibler, J.P.

    1993-12-31

    Radiolytic stability of a resorcinol-formaldehyde polycondensation-type cation exchange resin was investigated for up to lE09 rads total dose. The resorcinol-formaldehyde resin is a resin that has potential cesium decontamination applications at Pacific Northwest and Savannah River. We have determined both radiation and storage effects on performance of the resin using 101-AW Hanford simulant and ASTM Type-I water. Distribution coefficient determinations, total carbon analysis, and physical observations lead us to conclude that radiation up to lE08 rads does not significantly affect the performance of the resin. The resin is more stable to radiation in water than in 101-AW Hanford simulant. Also radiation or storage does not affect the thermal stability of the resin. Gas production rates for several resin slurries increased in the order of resin/101-AW Hanford simulant, resin/ASTM water, and resin/0.5 M HNO{sub 3}. H{sub 2} is produced from radiolysis of resin in 101-AW Hanford simulant with a G value of G(H{sub 2}) of 0.11 {plus_minus} 0.02 molecules/100eV and in 0.5 M HNO{sub 3} with a G value of G(H{sub 2}) of 0.27 {plus_minus} 0.02 molecules/lOOeV.

  6. Large forging manufacturing process

    DOE Patents [OSTI]

    Thamboo, Samuel V.; Yang, Ling

    2002-01-01

    A process for forging large components of Alloy 718 material so that the components do not exhibit abnormal grain growth includes the steps of: a) providing a billet with an average grain size between ASTM 0 and ASTM 3; b) heating the billet to a temperature of between 1750.degree. F. and 1800.degree. F.; c) upsetting the billet to obtain a component part with a minimum strain of 0.125 in at least selected areas of the part; d) reheating the component part to a temperature between 1750.degree. F. and 1800.degree. F.; e) upsetting the component part to a final configuration such that said selected areas receive no strains between 0.01 and 0.125; f) solution treating the component part at a temperature of between 1725.degree. F. and 1750.degree. F.; and g) aging the component part over predetermined times at different temperatures. A modified process achieves abnormal grain growth in selected areas of a component where desirable.

  7. Nugget hardfacing toughens roller cone bits

    SciTech Connect (OSTI)

    1996-11-25

    A new hardfacing material made of pure sintered tungsten carbide nuggets has improved roller cone rock bit performance in extremely hard lithologies, increasing penetration rates and extending bit life through multiple formations. In a recent test run in the Shushufindi 95 wells in Ecuador, a Security DBS 9 7/8-in. MPSF IADC 117M (International Association of Drilling Contractors bit code) bit with this new hardfacing drilled out the float equipment, cement, and show and then 3,309 ft of hard formations. The bit drilled through the Orteguaza claystone/shale/sand and chert formations and then to total depth at 6,309 ft in the Tiyuyacu shale/sand. The 3,309-ft interval was drilled at an average penetration rate (ROP) of 52.5 ft/hr. The proprietary nugget material was tested according to the American Society for Testing Materials (ASTM) G65 wear test method, a standard industry method of measuring wear resistance. The nugget material had ASTM wear test resistance more than twice that of standard hardfacing from conventional tungsten carbide.

  8. Method of improving fatigue life of cast nickel based superalloys and composition

    DOE Patents [OSTI]

    Denzine, Allen F.; Kolakowski, Thomas A.; Wallace, John F.

    1978-03-14

    The invention consists of a method of producing a fine equiaxed grain structure (ASTM 2-4) in cast nickel-base superalloys which increases low cycle fatigue lives without detrimental effects on stress rupture properties to temperatures as high as 1800.degree. F. These superalloys are variations of the basic nickel-chromium matrix, hardened by gamma prime [Ni.sub.3 (Al, Ti)] but with optional additions of cobalt, tungsten, molybdenum, vanadium, columbium, tantalum, boron, zirconium, carbon and hafnium. The invention grain refines these alloys to ASTM 2 to 4 increasing low cycle fatigue life by a factor of 2 to 5 (i.e. life of 700 hours would be increased to 1400 to 3500 hours for a given stress) as a result of the addition of 0.01% to 0.2% of a member of the group consisting of boron, zirconium and mixtures thereof to aid heterogeneous nucleation. The alloy is vacuum melted and heated to 250.degree.-400.degree. F. above the melting temperature, cooled to partial solidification, thus resulting in said heterogeneous nucleation and fine grains, then reheated and cast at about 50.degree.-100.degree. F. of superheat. Additions of 0.1% boron and 0.1% zirconium (optional) are the preferred nucleating agents.

  9. Data summary for nominal 500 ?m DUO2 Kernels

    SciTech Connect (OSTI)

    Hunn, John D

    2004-04-01

    This document is a compilation of characterization data obtained on the nominal 500 {micro}m DUO{sub 2} kernels produced by ORNL for the Advanced Gas Reactor Fuel Development and Qualification Program to satisfy the FY03 WBS 3.1.2 task milestone No.2.2 kg of kernels were produced and combined in two composite lots. DUN-500 was a 1630 g composite sieved between 500 {+-} 2 {micro}m and 534 {+-} 2 {micro}m ASTM E161 electroformed sieves. DUN-482 was a 385.6 g composite sieved between 482 {+-} 2 {micro}m and 518 {+-} 2 {micro}m ASTM E161 electroformed sieves. Size, shape, density, and microstructural analysis were performed on a 100 g sublot (DUN-500-S-1) riffled from the DUN-500 composite. Size and shape were also measured on a 100 g sublot (DUN-482-S-1) riffled from the DUN-482 composite. For comparison, analysis was also performed on kernels extracted from the German reference fuel EUO 2358-2365 (AGR-06).

  10. A NEW APPROACH TO DEVELOPMENT OF VOLUNTARY DECOMISSIONING STANDARDS

    SciTech Connect (OSTI)

    Lawrence M. Zull; Richard H. Meservey; Lawrence E. Boing

    2007-09-01

    The purpose of the Decontamination, Decommissioning, and Reutilization (DDR) Division of the American Nuclear Society (ANS) is to advance the technology of decontamination, decommissioning, and reutilization of nuclear and former nuclear installations, materials, facilities, and sites [1]. This includes sharing collective decommissioning experiences and lessons learned with others in the industry. An integral part of the work of the DDR Division is the preparation of voluntary decommissioning standards through its recently re-established DDR Standards Committee. This Committee intends to support development of various standards with other divisions of the ANS. The Committee also intends to participate with external organizations to disseminate information and lessons learned regarding decontamination activities, and participate in the development of voluntary decommissioning standards. External organizations, such as ASTM International, are involved in the development of consensus standards for nuclear decommissioning work. This paper describes the work of the DDR Standards Committee on a new co-operative initiative with ASTM International to develop voluntary consensus standards for nuclear decommissioning work.

  11. Improved mechanical properties of A 508 class 3 steel for nuclear pressure vessel through steelmaking

    SciTech Connect (OSTI)

    Kim, J.T.; Kwon, H.K.; Kim, K.C.; Kim, J.M.

    1997-12-31

    The present work is concerned with the steelmaking practices which improve the mechanical properties of the A 508 class 3 steel for reactor pressure vessel. Three kinds of steelmaking practices were applied to manufacture the forged heavy wall shell for reactor pressure vessel, that is, the vacuum carbon deoxidation (VCD), modified VCD containing aluminum and silicon-killing. The segregation of the chemical elements through the thickness was quite small so that the variations of the tensile properties at room temperature were small and the anisotropy of the impact properties was hardly observed regardless of the steelmaking practices. The Charpy V-notch impact properties and the reference nil-ductile transition temperature by drop weight test were significantly improved by the modified VCD and silicon-killing as compared with those of the steel by VCD. Moreover, the plane strain fracture toughness values of the materials by modified VCD and silicon-killing practices was much higher than those of the steel by VCD. These were resulted from the fining of austenite grain size. It was observed that the grain size was below 20 {micro}m (ASTM No. 8.5) when using the modified VCD and silicon-killing, compared to 50 {micro}m (ASTM No. 7.0) when using VCD.

  12. Methodology for developing and implementing alternative temperature-time curves for testing the fire resistance of barriers for nuclear power plant applications

    SciTech Connect (OSTI)

    Cooper, L.Y.; Steckler, K.D.

    1996-08-01

    Advances in fire science over the past 40 years have offered the potential for developing technically sound alternative temperature-time curves for use in evaluating fire barriers for areas where fire exposures can be expected to be significantly different than the ASTM E-119 standard temperature-time exposure. This report summarizes the development of the ASTM E-119, standard temperature-time curve, and the efforts by the federal government and the petrochemical industry to develop alternative fire endurance curves for specific applications. The report also provides a framework for the development of alternative curves for application at nuclear power plants. The staff has concluded that in view of the effort necessary for the development of nuclear power plant specific temperature-time curves, such curves are not a viable approach for resolving the issues concerning Thermo-Lag fire barriers. However, the approach may be useful to licensees in the development of performance-based fire protection methods in the future.

  13. Self-potential observations during hydraulic fracturing

    SciTech Connect (OSTI)

    Moore, Jeffrey R.; Glaser, Steven D.

    2007-09-13

    The self-potential (SP) response during hydraulic fracturing of intact Sierra granite was investigated in the laboratory. Excellent correlation of pressure drop and SP suggests that the SP response is created primarily by electrokinetic coupling. For low pressures, the variation of SP with pressure drop is linear, indicating a constant coupling coefficient (Cc) of -200 mV/MPa. However for pressure drops >2 MPa, the magnitude of the Cc increases by 80% in an exponential trend. This increasing Cc is related to increasing permeability at high pore pressures caused by dilatancy of micro-cracks, and is explained by a decrease in the hydraulic tortuosity. Resistivity measurements reveal a decrease of 2% prior to hydraulic fracturing and a decrease of {approx}35% after fracturing. An asymmetric spatial SP response created by injectate diffusion into dilatant zones is observed prior to hydraulic fracturing, and in most cases this SP variation revealed the impending crack geometry seconds before failure. At rupture, injectate rushes into the new fracture area where the zeta potential is different than in the rock porosity, and an anomalous SP spike is observed. After fracturing, the spatial SP distribution reveals the direction of fracture propagation. Finally, during tensile cracking in a point load device with no water flow, a SP spike is observed that is caused by contact electrification. However, the time constant of this event is much less than that for transients observed during hydraulic fracturing, suggesting that SP created solely from material fracture does not contribute to the SP response during hydraulic fracturing.

  14. Substance P ameliorates collagen II-induced arthritis in mice via suppression of the inflammatory response

    SciTech Connect (OSTI)

    Hong, Hyun Sook; Son, Youngsook

    2014-10-10

    Highlights: • SP can increase IL-10 levels and reduce TNF-α and IL-17 levels in RA. • SP causes the increase in T{sub reg}, M2 macrophage, and MSCs in RA. • SP-induced immune suppression leads to the blockade of RA progression. • SP can be used as the therapeutics for autoimmune-related inflammatory diseases. - Abstract: Current rheumatoid arthritis (RA) therapies such as biologics inhibiting pathogenic cytokines substantially delay RA progression. However, patient responses to these agents are not always complete and long lasting. This study explored whether substance P (SP), an 11 amino acids long endogenous neuropeptide with the novel ability to mobilize mesenchymal stem cells (MSC) and modulate injury-mediated inflammation, can inhibit RA progression. SP efficacy was evaluated by paw swelling, clinical arthritis scoring, radiological analysis, histological analysis of cartilage destruction, and blood levels of tumor necrosis factor-alpha (TNF-α) interleukin (IL)-10, and IL-17 in vivo. SP treatment significantly reduced local inflammatory signs, mean arthritis scores, degradation of joint cartilage, and invasion of inflammatory cells into the synovial tissues. Moreover, the SP treatment markedly reduced the size of spleens enlarged by excessive inflammation in CIA, increased IL-10 levels, and decreased TNF-α and IL-17 levels. Mobilization of stem cells and induction of T{sub reg} and M2 type macrophages in the circulation were also increased by the SP treatment. These effect of SP might be associated with the suppression of inflammatory responses in RA and, furthermore, blockade of RA progression. Our results propose SP as a potential therapeutic for autoimmune-related inflammatory diseases.

  15. Correlation between antitumor activity of protein A and in vivo formation of defined high molecular weight complexes with immunoglobulin G in BALB/c mice

    SciTech Connect (OSTI)

    Das, C.; Langone, J.J.

    1987-04-15

    The purpose of this study was to test the hypothesis that antitumor activity of staphylococcal protein A (SpA) is related to the composition of complexes formed in vivo with IgG. BALB/c mice were inoculated intradermally with 10(6) Meth A fibrosarcoma cells on day 0 and treated i.v. on days 3 and 7 with between 1 and 405 micrograms of SpA. The 45- and 15-micrograms doses significantly inhibited tumor growth and enhanced survival time compared to saline controls in four of four and two of four experiments, respectively. Sucrose gradient ultracentrifugation was used to show that serum from tumor-bearing or normal mice given 45 or 15 micrograms of /sup 125/I-labeled SpA contained only high molecular weight ((IgG)2SpA)2 complexes for up to 24 h after injection, whereas serum from mice given higher ineffective doses (135 and 405 micrograms) contained low molecular weight (IgG)(SpA) complexes over the first 1-4 h. Serum from mice undergoing successful therapy with 45 micrograms of unlabeled SpA also contained only ((IgG)2SpA)2 complexes. In contrast, when mice with large tumors (120-150 mm2) were treated on days 16 and 20, only the 135- and 405-micrograms doses significantly inhibited further tumor growth. Serum from mice with 16-day tumors contained only ((IgG)2SpA)2 complexes even after 5 min and when 135 or 405 micrograms of 125I-SpA was given. This result is consistent with significantly higher levels of total and SpA-reactive IgG in serum from these mice compared to normal mice or mice with 3-day tumors. Our results demonstrate a correlation between antitumor activity of SpA and in vivo formation of ((IgG)2SpA)2 complexes in an established animal model, and help to define the mechanism of SpA action at the molecular level.

  16. Final Report, Volume 1, Metallurgical Evaluation of Cast Duplex Stainless Steels and their Weldments

    SciTech Connect (OSTI)

    Wen, Songqing; Lundin, Carl, W.; Batten, Greg, W.

    2005-09-30

    Duplex stainless steels (DSS) are being specified for chloride containing environments due to their enhanced pitting and stress corrosion cracking resistance. They exhibit improved corrosion performance over the austenitic stainless steels. Duplex stainless steels also offer improved strength properties and are available in various wrought and cast forms. Selected grades of duplex stainless steel castings and their welds, in comparison with their wrought counterparts, were evaluated, regarding corrosion performance and mechanical properties and weldability. Multiple heats of cast duplex stainless steel were evaluated in the as-cast, solution annealed (SA) static cast and SA centrifugal cast conditions, while their wrought counterparts were characterized in the SA condition and in the form of as-rolled plate. Welding, including extensive assessment of autogenous welds and a preliminary study of composite welds (shielded metal arc weld (SMAW)), was performed. The evaluations included critical pitting temperature (CPT) testing, intergranular corrosion (IGC) testing, ASTM A923 (Methods A, B and C), Charpy impact testing, weldability testing (ASTM A494), ferrite measurement and microstructural evaluations. In the study, the corrosion performances of DSS castings were characterized and assessed, including the wrought counterparts for comparison. The evaluation filled the pore of lack of data for cast duplex stainless steels compared to wrought materials. A database of the pitting corrosion and IGC behavior of cast and wrought materials was generated for a greater depth of understanding for the behavior of cast duplex stainless steel. In addition, improved evaluation methods for DSS castings were developed according to ASTM A923, A262, G48 and A494. The study revealed that when properly heat treated according to the specification, (1) DSS castings have equal or better pitting and intergranular corrosion resistance than their wrought counterparts; (2) Welding reduces the

  17. Final Report, Volume 1, Metallurgical Evaluation of Cast Duplex Stainless Steels and their Weldments

    SciTech Connect (OSTI)

    Wen, Songqing; Lundin, Carl, W.; Batten, Greg, W.

    2005-09-30

    Duplex stainless steels (DSS) are being specified for chloride containing environments due to their enhanced pitting and stress corrosion cracking resistance. They exhibit improved corrosion performance over the austenitic stainless steels. Duplex stainless steels also offer improved strength properties and are available in various wrought and cast forms. Selected grades of duplex stainless steel castings and their welds, in comparison with their wrought counterparts, were evaluated, regarding corrosion performance and mechanical properties and weldability. Multiple heats of cast duplex stainless steel were evaluated in the as-cast, solution annealed (SA) static cast and SA centrifugal cast conditions, while their wrought counterparts were characterized in the SA condition and in the form of as-rolled plate. Welding, including extensive assessment of autogenous welds and a preliminary study of composite welds (shielded metal arc weld (SMAW)), was performed. The evaluations included critical pitting temperature (CPT) testing, intergranular corrosion (IGC) testing, ASTM A923 (Methods A, B and C), Charpy impact testing, weldability testing (ASTM A494), ferrite measurement and microstructural evaluations. In the study, the corrosion performances of DSS castings were characterized and assessed, including the wrought counterparts for comparison. The evaluation filled the pore of lack of data for cast duplex stainless steels compared to wrought materials. A database of the pitting corrosion and IGC behavior of cast and wrought materials was generated for a greater depth of understanding for the behavior of cast duplex stainless steel. In addition, improved evaluation methods for DSS castings were developed according to ASTM A923, A262, G48 and A494. The study revealed that when properly heat treated according to the specification, (1) DSS castings have equal or better pitting and intergranular corrosion resistance than their wrought counterparts; (2) Welding reduces the

  18. Progress and goals for INMM ASC N15 consensus standard ""Administrative practices for the determination and reporting of results of non-destructive assay measurements of nuclear material in situ for safeguards nuclear criticality safety and other purposes

    SciTech Connect (OSTI)

    Bracken, David S; Lamb, Frank W

    2009-01-01

    This paper will discuss the goals and progress to date on the development of INMM Accredited Standard Committee (ASC) N15 consensus standard Administrative Practices for the Determination and Reporting of Results of Non-Destructive Assay Measurements of Nuclear Material in situ for Safeguards, Nuclear Criticality Safety, and Other Purposes. This standard will define administrative practices in the areas of data generation and reporting of NDA assay of holdup deposits with consideration of the stakeholders of the reported results. These stakeholders may include nuclear material accounting and safeguards, nuclear criticality safety, waste management, health physics, facility characterization, authorization basis, radiation safety, and site licensing authorities. Stakeholder input will be solicited from interested parties and incorporated during the development of the document. Currently only one consensus standard exists that explicitly deals with NDA holdup measurements: ASTM C1455 Standard Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods. The ASTM International standard emphasizes the activities involved in actually making measurements, and was developed by safeguards and NDA experts. This new INMM ASC N15 standard will complement the existing ASTM international standard. One of the largest driving factors for writing this new standard was the recent emphasis on in situ NDA measurements by the safeguards community due to the Defense Nuclear Facility Safety Board (DNFSB) recommendation 2007-1 on in situ NDA measurements. Specifically, DNFSB recommendation 2007-1 referenced the lack of programmatic requirements for accurate in situ measurements and the use of measurement results for compliance with safety based requirements. That being the case, this paper will also discuss the progress made on the Implementation Plan for Defense Nuclear Facilities Safety Board Recommendation 2007-1 Safety-Related In Situ

  19. The Impact of Low Octane Hydrocarbon Blending Streams on Ethanol Engine Optimization

    SciTech Connect (OSTI)

    Szybist, James P; West, Brian H

    2013-01-01

    Ethanol is a very attractive fuel from an end-use perspective because it has a high chemical octane number and a high latent heat of vaporization. When an engine is optimized to take advantage of these fuel properties, both efficiency and power can be increased through higher compression ratio, direct fuel injection, higher levels of boost, and a reduced need for enrichment to mitigate knock or protect the engine and aftertreatment system from overheating. The ASTM D5798 specification for high level ethanol blends, commonly called E85, underwent a major revision in 2011. The minimum ethanol content was revised downward from 68 vol% to 51 vol%, which combined with the use of low octane blending streams such as natural gasoline introduces the possibility of a lower octane E85 fuel. While this fuel is suitable for current ethanol tolerant flex fuel vehicles, this study experimentally examines whether engines can still be aggressively optimized for the resultant fuel from the revised ASTM D5798 specification. The performance of six ethanol fuel blends, ranging from 51-85% ethanol, is compared to a premium-grade certification gasoline (UTG-96) in a single-cylinder direct-injection (DI) engine with a compression ratio of 12.9:1 at knock-prone engine conditions. UTG-96 (RON = 96.1), light straight run gasoline (RON = 63.6), and n-heptane (RON = 0) are used as the hydrocarbon blending streams for the ethanol-containing fuels in an effort to establish a broad range of knock resistance for high ethanol fuels. Results show that nearly all ethanol-containing fuels are more resistant to engine knock than UTG-96 (the only exception being the ethanol blend with 49% n-heptane). This knock resistance allows ethanol blends made with 33 and 49% light straight run gasoline, and 33% n-heptane to be operated at significantly more advanced combustion phasing for higher efficiency, as well as at higher engine loads. While experimental results show that the octane number of the hydrocarbon

  20. Microstructural evolution during solution treatment of Co-Cr-Mo-C biocompatible alloys

    SciTech Connect (OSTI)

    Giacchi, J.V.; Fornaro, O.; Palacio, H.

    2012-06-15

    Three different Co-Cr-Mo-C alloys conforming to ASTM F75 standard were poured in an industrial environment and subjected to a conventional solution treatment at 1225 Degree-Sign C for several time intervals. The microstructural changes and transformations were studied in each case in order to evaluate the way in which treatment time influences the secondary phase fraction and clarify the microstructural changes that could occur. To assess how treatment time affects microstructure, optical microscopy and image analyzer software, scanning electron microscopy and energy dispersion spectrometry analysis were employed. The main phases detected in the as-cast state were: {sigma}-phase, M{sub 6}C, and M{sub 23}C{sub 6} carbides. The latter presented two different morphologies, blocky type and lamellar type. Despite being considered the most detrimental feature to mechanical properties, {sigma}-phase and lamellar carbides dissolution took place in the early stages of solution treatment. M{sub 23}C{sub 6} carbides featured two different behaviors. In the alloy obtained by melting an appropriate quantity of alloyed commercial materials, a decrease in size, spheroidization and transformation into M{sub 6}C carbides were simultaneously observed. In the commercial ASTM F75 alloy, in turn, despite being the same phase, only a marked decrease in precipitates size was noticed. These different behaviors could be ascribed to the initial presence of other phases in the alloy obtained from alloyed materials, such as {sigma}-phase and 'pearlitic' carbides, or to the initial precipitate size which was much larger in the first than in the commercial ASTM F75 alloy studied. M{sub 6}C carbides dissolved directly in the matrix as they could not be detected in samples solution-treated for 15 min. - Highlights: Black-Right-Pointing-Pointer Three different Co-Cr-Mo alloys were poured under an industrial environment. Black-Right-Pointing-Pointer Transformation of existing phases followed during

  1. Supporting technology for enhanced oil recovery: EOR thermal processes. Seventh Amendment and Extension to Annex 4, Enhanced oil recovery thermal processes

    SciTech Connect (OSTI)

    Reid, T B; Colonomos, P

    1993-02-01

    This report contains the results of efforts under the six tasks of the Seventh Amendment and Extension of Annex IV, Enhanced Oil Recovery Thermal Processes of the Venezuela/USA Agreement. The report is presented in sections (for each of the 6 tasks) and each section contains one or more reports prepared by various individuals or groups describing the results of efforts under each of the tasks. A statement of each task, taken from the agreement, is presented on the first page of each section. The tasks are numbered 50 through 55. The first, second, third, fourth, fifth, sixth and seventh reports on Annex IV, Venezuela MEM/USA-DOE Fossil Energy Report IV-1, IV-2, IV-3, IV-4, IV-5 and IV-6 (DOE/BETC/SP-83/15, DOE/BC-84/6/SP, DOE/BC-86/2/SP, DOE/BC-87/2/SP, DOE/BC-89/l/SP, DOE/BC-90/l/SP, and DOE/BC-92/l/SP) contain the results for the first 49 tasks. Those reports are dated April 1983, August 1984, March 1986, July 1987, November 1988, December 1989, and October 1991, respectively. Each task report has been processed separately for inclusion in the Energy Science and Technology Database.

  2. Self-potential, soil co2 flux, and temperature on masaya volcano, nicaragua

    SciTech Connect (OSTI)

    Lewicki, J.L.; Connor, C.; St-Amand, K.; Stix, J.; Spinner, W.

    2003-07-01

    We investigate the spatial relationship between self-potential (SP), soil CO{sub 2} flux, and temperature and the mechanisms that produce SP anomalies on the flanks of Masaya volcano, Nicaragua. We measured SP, soil CO{sub 2} fluxes (<1 to 5.0 x 10{sup 4} g m{sup -2} d{sup -1}), and temperatures (26 to 80 C) within an area surrounding a normal fault, adjacent to Comalito cinder cone (2002-2003). These variables are well spatially correlated. Wavelengths of SP anomalies are {le}100 m, and high horizontal SP gradients flank the region of elevated flux and temperature. Carbon isotopic compositions of soil CO{sub 2} ({delta}{sup 13}C = -3.3 to -1.1{per_thousand}) indicate a deep gas origin. Given the presence of a deep water table (100 to 150 m), high gas flow rates, and subsurface temperatures above liquid boiling points, we suggest that rapid fluid disruption is primarily responsible for positive SP anomalies here. Concurrent measurement of SP, soil CO{sub 2} flux, and temperature may be a useful tool to monitor intrusive activity.

  3. Fuels for Advanced Combustion Engines Research Diesel Fuels: Analysis of Physical and Chemical Properties

    SciTech Connect (OSTI)

    Gallant, Tom; Franz, Jim; Alnajjar, Mikhail; Storey, John Morse; Lewis Sr, Samuel Arthur; Sluder, Scott; Cannella, William C; Fairbridge, Craig; Hager, Darcy; Dettman, Heather; Luecke, Jon; Ratcliff, Matthew A.; Zigler, Brad

    2009-01-01

    The CRC Fuels for Advanced Combustion Engines working group has worked to identify a matrix of research diesel fuels for use in advanced combustion research applications. Nine fuels were specified and formulated to investigate the effects of cetane number aromatic content and 90% distillation fraction. Standard ASTM analyses were performed on the fuels as well as GC/MS and /u1H//u1/u3C NMR analyses and thermodynamic characterizations. Details of the actual results of the fuel formulations compared with the design values are presented, as well as results from standard analyses, such as heating value, viscosity and density. Cetane number characterizations were accomplished by using both the engine method and the Ignition Quality Tester (IQT/sT) apparatus.

  4. Maximize revenue by analyzing crude oil treating parameters

    SciTech Connect (OSTI)

    Pellegrino, V.L.; Crane, T.L.; Heiman, M.S.; Pantermuhl, L.

    1983-10-01

    In the past the Chemshare Design 2000 program has been utilized to model gas processing plant streams. This paper describes how the Chemshare Design 2000 program may be used to maximize lease revenues by modeling a crude oil treating system and presents a technique of recombining an ASTM Distillation and a gas sample to arrive at the original composition of the inlet oil stream for use with the Chemshare Program. Next the treating facility operations are evaluated in order to maximize revenues which depending on the crude could mean an increase or decrease in the treating temperatures and pressures. For a lease producing 21,000 BOPD the losses can easily surpass $2 MM per year due to oil shrinkage and gravity differential.

  5. Maximize revenue by analyzing crude oil treating parameters

    SciTech Connect (OSTI)

    Heiman, M.S.; Pellegrino, V.L.; Pantermuehl, L.A.; Crane, T.L.

    1983-01-01

    In the past, the Chemshare Design 2000 program has been utilized to model gas processing plant streams. This study describes how the Chemshare Design 2000 program may be used to maximize lease revenues by modeling a crude oil treating system and presents a technique of recombining an ASTM distillation and a gas sample to arrive at the original composition of the inlet oil stream for use with the Chemshare Program. Next the treating facility operations are evaluated in order to maximize revenues which, depending on the crude, could mean an increase or decrease in the treating temperatures and pressures. For a lease producing 21,000 bopd the losses can easily surpass $2.0 MM/yr due to oil shrinkage and gravity differential.

  6. Unusual superheater tube wastage associated with carburization

    SciTech Connect (OSTI)

    Lopez-Lopez, D.; Wong-Noreno, A. ); Martinez, L. . Programa de Corrosion del Golfo de Mexico)

    1994-12-01

    The effects of operational power changes on the corrosion of ASTM A 213 type 321H (UNS S32109) stainless steel tubes in a steam superheater were studied. The fuel oil consumed in the plant is high in sulfur, vanadium, and asphalt content. After 107,000 hours of service, the tubes were seriously corroded and developed cracking of the oxide layer. The cracking was associated with frequent temperature changes. Bursts of carbon coke and soot particles deposited on tube surfaces and introduced a carburization process in the steel matrix. Carbon-rich deposits formed in the grain boundaries of the austenitic metal matrix. A carburization-corrosion process caused the intergranular wastage of the steel near the exposed surfaces.

  7. Effect of Materials on the Autoignition of Cyclopentane

    SciTech Connect (OSTI)

    Donna Post Guillen; Mark Walls

    2012-03-01

    Cyclopentane, a flammable hydrocarbon, is being considered as a working fluid for waste heat recovery applications. Experiments were conducted to determine the ignition delay time (IDT) of cyclopentane using an Ignition Quality Test (IQT) device. Two sets of experiments were conducted per ASTM D6890 (with exception to charge pressure and temperature) to determine ignition delay of the fuel at atmospheric pressure for normal air ({approx}21% oxygen) and vitiated air (13.3% oxygen) at a temperature of 530 C. Operation of the IQT device at a much lower pressure (1 bar) than normal operation (21.1 bar) led to very rich conditions and wetting of the stainless steel chamber walls. Catalytic effects produced small IDTs. Experiments were repeated with a modified injector to prevent wall wetting, resulting in average IDTs that are substantially longer.

  8. Salt Fog Testing Iron-Based Amorphous Alloys

    SciTech Connect (OSTI)

    Rebak, Raul B.; Aprigliano, Louis F.; Day, S. Daniel; Farmer, Joseph C.

    2007-07-01

    Iron-based amorphous alloys are hard and highly corrosion resistant, which make them desirable for salt water and other applications. These alloys can be produced as powder and can be deposited as coatings on any surface that needs to be protected from the environment. It was of interest to examine the behavior of these amorphous alloys in the standard salt-fog testing ASTM B 117. Three different amorphous coating compositions were deposited on 316L SS coupons and exposed for many cycles of the salt fog test. Other common engineering alloys such as 1018 carbon steel, 316L SS and Hastelloy C-22 were also tested together with the amorphous coatings. Results show that amorphous coatings are resistant to rusting in salt fog. Partial devitrification may be responsible for isolated rust spots in one of the coatings. (authors)

  9. Electrochemical Corrosion Testing of Borated Stainless Steel Alloys

    SciTech Connect (OSTI)

    lister, tedd e; Mizia, Ronald E

    2007-05-01

    The Department of Energy Office of Civilian Radioactive Waste Management has specified borated stainless steel manufactured to the requirements of ASTM A 887-89, Grade A, UNS S30464, to be the material used for the fabrication of the fuel basket internals of the preliminary transportation, aging, and disposal canister system preliminary design. The long-term corrosion resistance performance of this class of borated materials must be verified when exposed to expected YMP repository conditions after a waste package breach. Electrochemical corrosion tests were performed on crevice corrosion coupons of Type 304 B4 and Type 304 B5 borated stainless steels exposed to single postulated in-package chemistry at 60C. The results show low corrosion rates for the test period

  10. Microstructural Changes Due to Alkali-Silica Reaction during Standard Mortar Test

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Shin, Jun-Ho; Struble, Leslie; Kirkpatrick, R.

    2015-12-01

    The microstructural development of mortar bars with silica glass aggregate undergoing alkali-silica reaction (ASR) under the conditions of American Society for Testing and Materials (ASTM) Standard Test C1260 was analyzed using scanning electron microscopy and qualitative X-ray microanalysis. Cracking in the aggregate, the hydrated paste, and the paste-aggregate interface was important in the development of the microstructure. Cracks were characterized according to their location, their relationship to other cracks, and whether they are filled with ASR gel. Expansion of the bars was approximately 1% at 12 days and 2% at 53 days. They fell apart by 63 days. The barsmore » contained two zones, an inner region that was undergoing ASR and an outer and much more highly damaged zone that extended further inward over time. Evidence of ASR was present even during the period when specimens were immersed in water, prior to immersion in NaOH solution.« less

  11. Improved test method to verify the power rating of a photovoltaic (PV) project.

    SciTech Connect (OSTI)

    Panchula, A.; Pligavko, A.; King, D.; Marion, B.; Townsend, T.; Mitchell, L.; Dierauf, T.; Kimber, A.; Osterwald, C. R.; Newmiller, Jeff; Emery, K.; Talmud, F.; Whitaker, Chuck; Myers, D.; Forbess, J.; Granata, Jennifer E.; Levitsky, T.

    2010-03-01

    This paper reviews the PVUSA power rating method and presents two additional methods that seek to improve this method in terms of model precision and increased seasonal applicability. It presents the results of an evaluation of each method based upon regression analysis of over 12 MW of operating photovoltaic (PV) systems located in a wide variety of climates. These systems include a variety of PV technologies, mounting configurations, and array sizes to ensure the conclusions are applicable to a wide range of PV designs and technologies. The work presented in this paper will be submitted to ASTM for use in the development of a standard test method for certifying the power rating of PV projects.

  12. The design and fabrication of a calibrated hot box apparatus

    SciTech Connect (OSTI)

    Gatland, S.D. II; Goss, W.P.; Curcija, D.

    1997-11-01

    A second generation research calibrated hot box was designed and constructed at the University of Massachusetts`s Building Energy Research Laboratory. The hot box was built to meet the test methodologies specified in the American Society for Testing and Materials (ASTM) Standard Test Methods C 976 for calibrated hot boxes and C 1199 for fenestration system hot box test methods. The hot box has the capability of simulating both parallel and perpendicular weather side wind directions on building assemblies, including fenestration (window and door) systems. The weather side chamber has a temperature range of {minus}23.3 C to 60 C and the room side chamber has a temperature range of 21.1 C to 60 C. The design, fabrication, and instrumentation are described in detail.

  13. A wall and edge guarded hot box for thermal transmittance measurements

    SciTech Connect (OSTI)

    Gatland, S.D. II; Miller, R.G.; Goss, W.P.; Baumgardner, R.L.; Williams, R.G.

    1997-11-01

    A unique guarded hot box designed for thermal testing of fenestration products incorporates several new design concepts from guarded hot plates, namely wall and edge guards, is described in detail. The wall and edge guarded hot box was built to meet the test methodologies specified in the American Society for Testing and Materials (ASTM) Standard Test Methods C 236-89, Standard Test Method for Measuring the Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box, C 976-90, Standard Test Method for Measuring the Steady-State Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box and C 1199-91, Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods. Calibration test results for the box wall and specimen frame flanking are presented. Results from calibration transfer standard tests are compared with theoretical calculations and discussed.

  14. Saybolt universal viscosity converted to kinematic

    SciTech Connect (OSTI)

    Anaya, C.; Bermudez, O.

    1987-09-21

    This article describes a program for personal and handheld computers, written in Basic, which has been developed for the conversion of Saybolt universal viscosity in Saybolt Universal Seconds (SSU or SUS) to kinematic viscosity in centistokes (cSt), at any selected temperature. It was developed using the mathematical relationship presented in the American Society for Testing and Materials (ASTM) standard D2161-82. In the standard, an equation is presented to convert kinematic viscosity to Saybolt universal viscosity, but nothing is presented to convert from Saybolt to kinematic because it is necessary to find the roots of a nonexplicit function. There are several numerical methods that can be used to determine the roots of the nonexplicit function, and therefore, convert Saybolt universal viscosity to kinematic viscosity. In the program, the first iteration of the second-order Newton-Raphson method is followed by the Wegstein method as a convergence accelerator.

  15. Development of Advanced Surface Enhancement Technology for Decreasing Wear and Corrosion of Equipment Used for Mineral Processing

    SciTech Connect (OSTI)

    Daniel Tao; Craig A. Blue

    2004-08-01

    Equipment wear is a major concern in the mineral processing industry, which dramatically increases the maintenance cost and adversely affects plant operation efficiency. In this research, wear problems of mineral processing equipment including screens, sieve bends, heavy media vessel, dewatering centrifuge, etc., were identified. A novel surface treatment technology, high density infrared (HDI) surface coating process was proposed for the surface enhancement of selected mineral processing equipment. Microstructural and mechanical properties of the coated samples were characterized. Laboratory-simulated wear tests were conducted to evaluate the tribological performance of the coated components. Test results indicate that the wear resistance of AISI 4140 and ASTM A36 steels can be increased 3 and 5 folds, respectively by the application of HDI coatings.

  16. Uncertainty of silicon 1-MeV damage function

    SciTech Connect (OSTI)

    Danjaji, M.B.; Griffin, P.J.

    1997-02-01

    The electronics radiation hardness-testing community uses the ASTM E722-93 Standard Practice to define the energy dependence of the nonionizing neutron damage to silicon semiconductors. This neutron displacement damage response function is defined to be equal to the silicon displacement kerma as calculated from the ORNL Si cross-section evaluation. Experimental work has shown that observed damage ratios at various test facilities agree with the defined response function to within 5%. Here, a covariance matrix for the silicon 1-MeV neutron displacement damage function is developed. This uncertainty data will support the electronic radiation hardness-testing community and will permit silicon displacement damage sensors to be used in least squares spectrum adjustment codes.

  17. Cementitious Barriers Partnership: OPC Paste Samples Exposed To Aggressive Solutions

    SciTech Connect (OSTI)

    Langton, C.

    2014-11-01

    The study presented in this report focused on a low-activity wasteform containing a high pH pore solution with a significant level of sulfate. The purpose of the study was to improve understanding of the complex concrete/wasteform reactive transport problem, in particular the role of pH in sulfate attack. Paste samples prepared at three different water-to-cement ratios were tested. The mixtures were prepared with ASTM Type I cement, without additional admixtures. The samples were exposed to two different sodium sulfate contact solutions. The first solution was prepared at 0.15M Na2SO4. The second solution also incorporated 0.5M NaOH, to mimic the high pH conditions found in Saltstone.

  18. Fly ash leachate generation and qualitative trends at Ohio test sites

    SciTech Connect (OSTI)

    Solc, J.; Foster, H.J.; Butler, R.D.

    1995-12-01

    Under the sponsorship of the U.S. Department of Energy, the environmental impact and potential contamination from landfilled fly ash (coal conversion solid residues - CCSRs) have been studied at field sites in Ohio. The progressive increase of moisture content within pilot cells over depth and time facilitated intensive chemical processes and generation of highly alkaline (pH of 10 to 12) leachate. Chemistry of pore water from lysimeters and ASTM leachate from fly ash and soil cores indicate the leachate potential to migrate out of deposit and impact the pore water quality of surrounding soils. Na, SO{sub 4} and, particularly, K, Cl, pH, and EC appeared to be valuable indicator parameters for tracking potential leachate transport both within the cells and below the ash/soil interface.

  19. SURFACE PREPARATION OF STEEL SUBSTRATES USING GRIT-BLASTING

    SciTech Connect (OSTI)

    Donna Post Guillen; D. J. Varacalle, Jr.; D. Deason; W. Rhodaberger; E. Sampson

    2005-05-01

    The primary purpose of grit blasting for thermal spray applications is to ensure a strong mechanical bond between the substrate and the coating by the enhanced roughening of the substrate material. This study presents statistically designed experiments that were accomplished to investigate the effect of abrasives on roughness for A36/1020 steel. The experiments were conducted using a Box statistical design of experiment (SDE) approach. Three grit blasting parameters and their effect on the resultant substrate roughness were investigated. These include blast media, blast pressure, and working distance. The substrates were characterized for roughness using surface profilometry. These attributes were correlated with the changes in operating parameters. Twin-Wire Electric Arc (TWEA) coatings of aluminum and zinc/aluminum were deposited on the grit-blasted substrates. These coatings were then tested for bond strength. Bond strength studies were conducted utilizing a portable adhesion tester following ASTM standard D4541.

  20. Development of Advanced Surface Enhancement Technology for Decreasing Wear and Corrosion of Equipment Used for Mineral Processing

    SciTech Connect (OSTI)

    Daniel Tao; R. Honaker; B. K. Parekh

    2007-09-20

    Equipment wear is a major concern in the mineral processing industry, which dramatically increases the maintenance cost and adversely affects plant operation efficiency. In this research, novel surface treatment technologies, High Density Infrared (HDI) and Laser Surface Engineering (LSE) surface coating processes were developed for the surface enhancement of selected mineral and coal processing equipment. Microstructural and mechanical properties of the coated specimens were characterized. Laboratory-simulated wear tests were conducted to evaluate the tribological performance of the coated components. Test results indicate that the wear resistance of ASTM A36 (raw coal screen section) and can be significantly increased by applying HDI and LSE coating processes. Field testing has been performed using a LSE-treated screen panel and it showed a significant improvement of the service life.

  1. Hydrogen Fuel Quality

    SciTech Connect (OSTI)

    Rockward, Tommy

    2012-07-16

    For the past 6 years, open discussions and/or meetings have been held and are still on-going with OEM, Hydrogen Suppliers, other test facilities from the North America Team and International collaborators regarding experimental results, fuel clean-up cost, modeling, and analytical techniques to help determine levels of constituents for the development of an international standard for hydrogen fuel quality (ISO TC197 WG-12). Significant progress has been made. The process for the fuel standard is entering final stages as a result of the technical accomplishments. The objectives are to: (1) Determine the allowable levels of hydrogen fuel contaminants in support of the development of science-based international standards for hydrogen fuel quality (ISO TC197 WG-12); and (2) Validate the ASTM test method for determining low levels of non-hydrogen constituents.

  2. Upgraging heavy crude oils to lighter products with a dispersed zeolite

    SciTech Connect (OSTI)

    Rollmann, L. D.

    1985-08-20

    This invention provides a process for upgrading a variety of hydrocarbon oils including low-grade crudes and fractions thereof. In this process, a hydrocarbon oil having an ASTM 50% temperature not higher than 550/sup 0/ F. is converted at low temperature and pressure to more volatile products by a dispersion of crystalline zeolite catalysts having a silica: aluminia ratio of at least 12 and a C.I. within 1-12. Initially, 0.02-10 wt % of the catalyst is dispersed in the feed until the catalyst inventory in the reactor stage accumulates. Thereafter, catalyst is added and removed to maintain a total catalyst content not greater than about 35 wt % of the feed in the reactor.

  3. Failures of nickel/copper bolts in subsea application

    SciTech Connect (OSTI)

    Wolfe, L.H.; Joosten, M.W.

    1988-08-01

    Slow-strain-rate tests in ASTM seawater using specimens prepared from a failed nickel/copper-alloy bolt have shown that precipitation-hardened UNS N05500 (Monel K-500) is embrittled by cathodic protection with sacrificial aluminum anodes. Some loss of ductility also occurred when annealed UNS N05500 was coupled to aluminum anodes and when the hardened alloy was coupled to steel. Brittle fractures produced by slow-strain-rate tests were intergranular and were very similar in appearance to the field fractures. While the slow-strain-rate tests were conducted on an alloy from only one source, there is no reason to assume that UNS N05500 alloy from other sources would resist hydrogen embrittlement from standard cathodic protection systems.

  4. Final Scientific Report - "Novel Steels for High Temperature Carburizing"

    SciTech Connect (OSTI)

    McKimpson, Marvin G.; Liu, Tianjun; Maniruzzaman, Md

    2012-07-27

    This program was undertaken to develop a microalloy-modified grade of standard carburizing steel that can successfully exploit the high temperature carburizing capabilities of current commercial low pressure (i.e. 'vacuum') carburizing systems. Such steels can lower the amount of energy required for commercial carburizing operations by reducing the time required for deep-case carburizing operations. The specific technical objective of the work was to demonstrate a carburizing steel composition capable of maintaining a prior austenite grain size no larger than ASTM grain size number 5 after exposure to simulated carburizing conditions of 1050 C for 8 hr. Such thermal exposure should be adequate for producing carburized case depths up to about 2 mm. Such carburizing steels are expected to be attractive for use across a wide range of industries, including the petroleum, chemical, forest products, automotive, mining and industrial equipment industries. They have potential for reducing energy usage during low pressure carburizing by more than 25%, as well as reducing cycle times and process costs substantially. They also have potential for reducing greenhouse gas emissions from existing low pressure carburizing furnaces by more than 25%. High temperature carburizing can be done in most modern low pressure carburizing systems with no additional capital investment. Accordingly, implementing this technology on carburizing furnaces will provide a return on investment significantly greater than 10%. If disseminated throughout the domestic carburizing community, the technology has potential for saving on the order of 23 to 34 trillion BTU/year in industrial energy usage. Under the program, two compositions of microalloyed, coarsening-resistant low alloy carburizing steels were developed, produced and evaluated. After vacuum annealing at 1050oC for 8 hrs and high pressure gas quenching, both steels exhibited a prior austenite ASTM grain size number of 5.0 or finer. For

  5. Characterization of low-VOC latex paints: Volatile organic compound content, VOC and aldehyde emissions, and paint performance. Final report, January 1997--January 1999

    SciTech Connect (OSTI)

    Fortmann, R.; Lao, H.C.; Ng, A.; Roache, N.

    1999-04-01

    The report gives results of laboratory tests to evaluate commercially available latex paints advertised as `low-odor,` `low-VOC (volatile organic compound),` or `no-VOC.` Measurements were performed to quantify the total content of VOCs in the paints and to identify the predominant VOCs and aldehydes in the emissions following application to test substrates. The performance of the paints was evaluated and compared to that of commonly used conventional latex paints by American Society for Testing and Materials (ASTM) standard methods that measured parameters such as scrubbability, cleanability, and hiding power. The report describes the paints that were tested, the test methods, and the experimental data. Results are presented that can be used to evaluate the low-odor/low-VOC paints as alternatives to conventional latex wall paints that contain and emit higher concentrations of VOCs.

  6. Procedures for ground-water investigations

    SciTech Connect (OSTI)

    Not Available

    1989-09-01

    This manual was developed by the Pacific Northwest Laboratory (PNL) to document the procedures used to carry out and control the technical aspects of ground-water investigations at the PNL. Ground-water investigations are carried out to fulfill the requirements for the US Department of Energy (DOE) to meet the requirements of DOE Orders. Investigations are also performed for various clients to meet the requirements of the Resource Conservation and Recovery Act of 1976 (RCRA) and the Comprehensive Environmental Response, Compensation and Liability Act of 1980 (CERCLA). National standards including procedures published by the American Society for Testing and Materials (ASTM) and the US Geological Survey were utilized in developing the procedures contained in this manual.

  7. Degradation of Nylon 6,6 Fire-Suppression Casing from Plutonium Glove Boxes Under Alpha and Neutron Irradiation

    SciTech Connect (OSTI)

    Millsap, Donald W.; Cournoyer, Michael E.; Landsberger, Sheldon; Tesmer, Joseph R.; Wang, Matthew Y.

    2015-04-23

    Nylon 6,6 tensile specimens, conforming to the casing for self-contained fire extinguisher systems, have been irradiated using both an accelerator He++ ion beam and a 5-Ci PuBe neutron source to model the radiation damage these systems would likely incur over a lifetime of operation within glove boxes. Following irradiation, these samples were mechanically tested using standard practices as described in ASTM D638. The results of the He++ study indicate that the tensile strength of the nylon specimens undergoes some slight (<10%) degradation while other properties of the samples, such as elongation and tangent modulus, appear to fluctuate with increasing dose levels. The He++-irradiated specimens also have a noticeable level of discoloration corresponding to increasing levels of dose. The neutron-irradiated samples show a higher degree of mechanical degradation than the He++-irradiated samples.

  8. Degradation of Nylon 6,6 Fire-Suppression Casing from Plutonium Glove Boxes Under Alpha and Neutron Irradiation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Millsap, Donald W.; Cournoyer, Michael E.; Landsberger, Sheldon; Tesmer, Joseph R.; Wang, Matthew Y.

    2015-04-23

    Nylon 6,6 tensile specimens, conforming to the casing for self-contained fire extinguisher systems, have been irradiated using both an accelerator He++ ion beam and a 5-Ci PuBe neutron source to model the radiation damage these systems would likely incur over a lifetime of operation within glove boxes. Following irradiation, these samples were mechanically tested using standard practices as described in ASTM D638. The results of the He++ study indicate that the tensile strength of the nylon specimens undergoes some slight (<10%) degradation while other properties of the samples, such as elongation and tangent modulus, appear to fluctuate with increasing dosemore » levels. The He++-irradiated specimens also have a noticeable level of discoloration corresponding to increasing levels of dose. The neutron-irradiated samples show a higher degree of mechanical degradation than the He++-irradiated samples.« less

  9. CFCC working group meeting: Proceedings

    SciTech Connect (OSTI)

    1997-12-31

    This report is a compilation of the vugraphs presented at this meeting. Presentations covered are: CFCC Working Group; Overview of study on applications for advanced ceramics in industries for the future; Design codes and data bases: The CFCC program and its involvement in ASTM, ISO, ASME, and military handbook 17 activities; CFCC Working Group meeting (McDermott Technology); CFCC Working Group meeting (Textron); CFCC program for DMO materials; Developments in PIP-derived CFCCs; Toughened Silcomp (SiC-Si) composites for gas turbine engine applications; CFCC program for CVI materials; Self-lubricating CFCCs for diesel engine applications; Overview of the CFCC program`s supporting technologies task; Life prediction methodologies for CFCC components; Environmental testing of CFCCs in combustion gas environments; High-temperature particle filtration ORNL/DCC CRADA; HSCT CMC combustor; and Case study -- CFCC shroud for industrial gas turbines.

  10. Production of Biodiesel at Kinetic Limit Achieved in a Centrifugal Reactor/Separator

    SciTech Connect (OSTI)

    McFarlane, Joanna; Tsouris, Costas; Birdwell Jr, Joseph F; Lee, Denise L; Jennings, Hal L; Pahmer Boitrago, Amy M; Terpstra, Sarah M

    2010-01-01

    The kinetics of the transesterification of soybean oil has been investigated in a centrifugal reactor at temperatures from 45 to 80 C and pressures up to 2.6 bar using gas chromatography flame ionization detection (GC-FID) and infrared (IR) spectroscopy. The yields of product methyl esters were quantified using IR, proton Nuclear Magnetic Resonance (H1NMR), and viscosity measurements and were found to achieve 90% of the yield in 2 min; however, to meet ASTM specifications with one pass through the reactor, a 15 min residence time was needed. Performance was improved by sequential reactions, allowing separation of by-product glycerine and injection of additional small aliquots of methanol. The kinetics was modeled using a three-step mechanism of reversible reactions, which was used to predict performance at commercial scale. The mechanism correctly predicted the exponential decline in reaction rate as the concentration of the products allowed significant reverse reactions to occur.

  11. Tannin bark Melalauca cajuputi powell (gelam) as green corrosion inhibitor of mild steel

    SciTech Connect (OSTI)

    Talib, Nur Atiqah Abu; Zakaria, Sarani; Hua, Chia Chin; Othman, Norinsan Kamil

    2014-09-03

    Tannin was extracted from gelam bark and used to produce corrosion inhibitor for mild steel. Tannin was extracted from gelam bark using 70% aqueous acetone for 6 hour. Tannin powder was characterization using fourier transform infrared spectroscopy to analyse chemical component in tannin and Scanning electron microscope (SEM) for tannin physical structure. The tannin effect on the corrosion inhibition of mild steel has been investigated in 1Mol HCl solution for 6 hour followed ASTM. The weight loss method were applied to study the mild steel corrosion behavior in the present and absend of different concentration of tannin (250, 300, 350)ppm. Tannin act good inhibitor as corrosion inhibitor for mild steel in acid medium. Surface morphology of carbon steel with and without inhibitor was investigated by scanning electron microscopy.

  12. Preburn versus postburn mineralogical and geochemical characteristics of overburden and coal at the Hanna, Wyoming underground coal gasification site

    SciTech Connect (OSTI)

    Oliver, R.L.; Youngberg, A.D.

    1983-12-01

    Hundreds of mineralogic and geochemical tests were done under US Department of Energy contracts on core samples taken from the Hanna underground coal gasification site. These tests included x-ray diffraction studies of minerals in coal ash, overburden rocks, and heat-altered rocks; x-ray fluorescence analyses of oxides in coal ash and heat-altered rocks; semi-quantitative spectrographic analyses of elements in coal, overburden, and heat-altered rocks; chemical analyses of elements and compounds in coal, overburden, and heat-altered rocks and ASTM proximate and ultimate analyses of coal and heat-altered coal. These data sets were grouped, averaged, and analyzed to provide preburn and postburn mineralogic and geochemical characteristics of rock units at the site. Where possible, the changes in characteristics from the preburn to the postburn state are related to underground coal gasification processes. 11 references, 13 figures, 8 tables.

  13. Methods of cracking a crude product to produce additional crude products

    DOE Patents [OSTI]

    Mo, Weijian; Roes, Augustinus Wilhelmus Maria; Nair, Vijay

    2009-09-08

    A method for producing a crude product is disclosed. Formation fluid is produced from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes olefins. The liquid stream is fractionated to produce one or more crude products. At least one of the crude products has a boiling range distribution from 38.degree. C. and 343.degree. C. as determined by ASTM Method D5307. The crude product having the boiling range distribution from 38.degree. C. and 343.degree. C. is catalytically cracked to produce one or more additional crude products. At least one of the additional crude products is a second gas stream. The second gas stream has a boiling point of at most 38.degree. C. at 0.101 MPa.

  14. Laboratory Evaluation of Air Flow Measurement Methods for Residential HVAC Returns for New Instrument Standards

    SciTech Connect (OSTI)

    Walker, Iain; Stratton, Chris

    2015-08-01

    This project improved the accuracy of air flow measurements used in commissioning California heating and air conditioning systems in Title 24 (Building and Appliance Efficiency Standards), thereby improving system performance and efficiency of California residences. The research team at Lawrence Berkeley National Laboratory addressed the issue that typical tools used by contractors in the field to test air flows may not be accurate enough to measure return flows used in Title 24 applications. The team developed guidance on performance of current diagnostics as well as a draft test method for use in future evaluations. The study team prepared a draft test method through ASTM International to determine the uncertainty of air flow measurements at residential heating ventilation and air conditioning returns and other terminals. This test method, when finalized, can be used by the Energy Commission and other entities to specify required accuracy of measurement devices used to show compliance with standards.

  15. Evaluation of Experimental Parameters in the Accelerated Aging of Closed-Cell Foam Insulation

    SciTech Connect (OSTI)

    Stovall, Therese K; Vanderlan, Michael; Atchley, Jerald Allen

    2012-12-01

    The thermal conductivity of many closed-cell foam insulation products changes over time as production gases diffuse out of the cell matrix and atmospheric gases diffuse into the cells. Thin slicing has been shown to be an effective means of accelerating this process in such a way as to produce meaningful results. Efforts to produce a more prescriptive version of the ASTM C1303 standard test method led to the ruggedness test described here. This test program included the aging of full size insulation specimens for time periods of five years for direct comparison to the predicted results. Experimental parameters under investigation include: slice thickness, slice origin (at the surface or from the core of the slab), thin slice stack composition, product facings, original product thickness, product density, and product type. The test protocol has been completed and this report provides a detailed evaluation of the impact of the test parameters on the accuracy of the 5-year thermal conductivity prediction.

  16. QuickSite{sup SM}, the Argonne expedited site characterization methodology,

    SciTech Connect (OSTI)

    Burton, J.C.; Meyer, W.T.

    1997-09-01

    Expedited site characterization (ESC), developed by Argonne National Laboratory, is an interactive, integrated process emphasizing the use of existing data of sufficient quality, multiple complementary characterization methods, and on-site decision making to optimize site investigations. The Argonne ESC is the basis for the provisional ESC standard of the ASTM (American Society for Testing and Materials). QuickSite{sup SM} is the implementation package developed by Argonne to facilitate ESC of sites contaminated with hazardous wastes. At various sites, Argonne has successfully implemented QuickSite{sup SM} and demonstrated the technical superiority of the ESC process over traditional methodologies guided by statistics and random-sampling approaches. For example, in a QuickSite{sup SM} characterization of a perched aquifer at the Pantex Plant in Texas, past data and geochemical analyses of existing wells were used to develop a model for recharge and contaminant movement. With the model as a guide, closure was achieved with minimal field work.

  17. BERYLLIUM MEASUREMENT IN COMMERCIALLY AVAILABLE WET WIPES

    SciTech Connect (OSTI)

    Youmans-Mcdonald, L.

    2011-02-18

    Analysis for beryllium by fluorescence is now an established method which is used in many government-run laboratories and commercial facilities. This study investigates the use of this technique using commercially available wet wipes. The fluorescence method is widely documented and has been approved as a standard test method by ASTM International and the National Institute for Occupational Safety and Health (NIOSH). The procedure involves dissolution of samples in aqueous ammonium bifluoride solution and then adding a small aliquot to a basic hydroxybenzoquinoline sulfonate fluorescent dye (Berylliant{trademark} Inc. Detection Solution Part No. CH-2) , and measuring the fluorescence. This method is specific to beryllium. This work explores the use of three different commercial wipes spiked with beryllium, as beryllium acetate or as beryllium oxide and subsequent analysis by optical fluorescence. The effect of possible interfering metals such as Fe, Ti and Pu in the wipe medium is also examined.

  18. Messiah College Biodiesel Fuel Generation Project Final Technical Report

    SciTech Connect (OSTI)

    Zummo, Michael M; Munson, J; Derr, A; Zemple, T; Bray, S; Studer, B; Miller, J; Beckler, J; Hahn, A; Martinez, P; Herndon, B; Lee, T; Newswanger, T; Wassall, M

    2012-03-30

    Many obvious and significant concerns arise when considering the concept of small-scale biodiesel production. Does the fuel produced meet the stringent requirements set by the commercial biodiesel industry? Is the process safe? How are small-scale producers collecting and transporting waste vegetable oil? How is waste from the biodiesel production process handled by small-scale producers? These concerns and many others were the focus of the research preformed in the Messiah College Biodiesel Fuel Generation project over the last three years. This project was a unique research program in which undergraduate engineering students at Messiah College set out to research the feasibility of small-biodiesel production for application on a campus of approximately 3000 students. This Department of Energy (DOE) funded research program developed out of almost a decade of small-scale biodiesel research and development work performed by students at Messiah College. Over the course of the last three years the research team focused on four key areas related to small-scale biodiesel production: Quality Testing and Assurance, Process and Processor Research, Process and Processor Development, and Community Education. The objectives for the Messiah College Biodiesel Fuel Generation Project included the following: 1. Preparing a laboratory facility for the development and optimization of processors and processes, ASTM quality assurance, and performance testing of biodiesel fuels. 2. Developing scalable processor and process designs suitable for ASTM certifiable small-scale biodiesel production, with the goals of cost reduction and increased quality. 3. Conduct research into biodiesel process improvement and cost optimization using various biodiesel feedstocks and production ingredients.

  19. Measuring bio-oil upgrade intermediates and corrosive species with polarity-matched analytical approaches

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Connatser, Raynella M.; Lewis, Sr., Samuel Arthur; Keiser, James R.; Choi, Jae -Soon

    2014-10-03

    Integrating biofuels with conventional petroleum products requires improvements in processing to increase blendability with existing fuels. This work demonstrates analysis techniques for more hydrophilic bio-oil liquids that give improved quantitative and qualitative description of the total acid content and organic acid profiles. To protect infrastructure from damage and reduce the cost associated with upgrading, accurate determination of acid content and representative chemical compound analysis are central imperatives to assessing both the corrosivity and the progress toward removing oxygen and acidity in processed biomass liquids. Established techniques form an ample basis for bio-liquids evaluation. However, early in the upgrading process, themore » unique physical phases and varied hydrophilicity of many pyrolysis liquids can render analytical methods originally designed for use in petroleum-derived oils inadequate. In this work, the water solubility of the organic acids present in bio-oils is exploited in a novel extraction and titration technique followed by analysis on the water-based capillary electrophoresis (CE) platform. The modification of ASTM D664, the standard for Total Acid Number (TAN), to include aqueous carrier solvents improves the utility of that approach for quantifying acid content in hydrophilic bio-oils. Termed AMTAN (modified Total Acid Number), this technique offers 1.2% relative standard deviation and dynamic range comparable to the conventional ASTM method. Furthermore, the results of corrosion product evaluations using several different sources of real bio-oil are discussed in the context of the unique AMTAN and CE analytical approaches developed to facilitate those measurements.« less

  20. Impact of Biodiesel Impurities on the Performance and Durability of DOC, DPF and SCR Technologies

    SciTech Connect (OSTI)

    Williams, A.; McCormick, R.; Luecke, J.; Brezny, R.; Geisselmann, A.; Voss, K.; Hallstrom, K.; Leustek, M.; Parsons, J.; Abi-Akar, H.

    2011-06-01

    It is estimated that operating continuously on a B20 fuel containing the current allowable ASTM specification limits for metal impurities in biodiesel could result in a doubling of ash exposure relative to lube-oil derived ash. The purpose of this study was to determine if a fuel containing metals at the ASTM limits could cause adverse impacts on the performance and durability of diesel emission control systems. An accelerated durability test method was developed to determine the potential impact of these biodiesel impurities. The test program included engine testing with multiple DPF substrate types as well as DOC and SCR catalysts. The results showed no significant degradation in the thermo-mechanical properties of cordierite, aluminum titanate, or silicon carbide DPFs after exposure to 150,000 mile equivalent biodiesel ash and thermal aging. However, exposure of a cordierite DPF to 435,000 mile equivalent aging resulted in a 69% decrease in the thermal shock resistance parameter. It is estimated that the additional ash from 150,000 miles of biodiesel use would also result in a moderate increases in exhaust backpressure for a DPF. A decrease in DOC activity was seen after exposure to 150,000 mile equivalent aging, resulting in higher HC slip and a reduction in NO{sub 2} formation. The metal-zeolite SCR catalyst experienced a slight loss in activity after exposure to 435,000 mile equivalent aging. This catalyst, placed downstream of the DPF, showed a 5% reduction in overall NOx conversion activity over the HDDT test cycle.

  1. Mechanical characterization of densely welded Apache Leap tuff

    SciTech Connect (OSTI)

    Fuenkajorn, K.; Daemen, J.J.K.

    1991-06-01

    An empirical criterion is formulated to describe the compressive strength of the densely welded Apache Leap tuff. The criterion incorporates the effects of size, L/D ratio, loading rate and density variations. The criterion improves the correlation between the test results and the failure envelope. Uniaxial and triaxial compressive strengths, Brazilian tensile strength and elastic properties of the densely welded brown unit of the Apache Leap tuff have been determined using the ASTM standard test methods. All tuff samples are tested dry at room temperature (22 {plus_minus} 2{degrees}C), and have the core axis normal to the flow layers. The uniaxial compressive strength is 73.2 {plus_minus} 16.5 MPa. The Brazilian tensile strength is 5.12 {plus_minus} 1.2 MPa. The Young`s modulus and Poisson`s ratio are 22.6 {plus_minus} 5.7 GPa and 0.20 {plus_minus} 0.03. Smoothness and perpendicularity do not fully meet the ASTM requirements for all samples, due to the presence of voids and inclusions on the sample surfaces and the sample preparation methods. The investigations of loading rate, L/D radio and cyclic loading effects on the compressive strength and of the size effect on the tensile strength are not conclusive. The Coulomb strength criterion adequately represents the failure envelope of the tuff under confining pressures from 0 to 62 MPa. Cohesion and internal friction angle are 16 MPa and 43 degrees. The brown unit of the Apache Leap tuff is highly heterogeneous as suggested by large variations of the test results. The high intrinsic variability of the tuff is probably caused by the presence of flow layers and by nonuniform distributions of inclusions, voids and degree of welding. Similar variability of the properties has been found in publications on the Topopah Spring tuff at Yucca Mountain. 57 refs., 32 figs., 29 tabs.

  2. Carbon Mineralization by Aqueous Precipitation for Beneficial Use of CO2 from Flue Gas

    SciTech Connect (OSTI)

    Brent Constantz; Randy Seeker; Martin Devenney

    2010-06-30

    Calera's innovative Mineralization via Aqueous Precipitation (MAP) technology for the capture and conversion of CO{sub 2} to useful materials for use in the built environment was further developed and proven in the Phase 1 Department of Energy Grant. The process was scaled to 300 gallon batch reactors and subsequently to Pilot Plant scale for the continuous production of product with the production of reactive calcium carbonate material that was evaluated as a supplementary cementitious material (SCM). The Calera SCM{trademark} was evaluated as a 20% replacement for ordinary portland cement and demonstrated to meet the industry specification ASTM 1157 which is a standard performance specification for hydraulic cement. The performance of the 20% replacement material was comparable to the 100% ordinary portland cement control in terms of compressive strength and workability as measured by a variety of ASTM standard tests. In addition to the performance metrics, detailed characterization of the Calera SCM was performed using advanced analytical techniques to better understand the material interaction with the phases of ordinary portland cement. X-ray synchrotron diffraction studies at the Advanced Photon Source in Argonne National Lab confirmed the presence of an amorphous phase(s) in addition to the crystalline calcium carbonate phases in the reactive carbonate material. The presence of carboaluminate phases as a result of the interaction of the reactive carbonate materials with ordinary portland cement was also confirmed. A Life Cycle Assessment was completed for several cases based on different Calera process configurations and compared against the life cycle of ordinary portland cement. In addition to the materials development efforts, the Calera technology for the production of product using an innovative building materials demonstration plant was developed beyond conceptual engineering to a detailed design with a construction schedule and cost estimate.

  3. Status of Initial Assessment of Physical and Mechanical Properties of Graphite Grades for NGNP Appkications

    SciTech Connect (OSTI)

    Strizak, Joe P; Burchell, Timothy D; Windes, Will

    2011-12-01

    Current candidate graphite grades for the core structures of NGNP include grades NBG-17, NBG-18, PCEA and IG-430. Both NBG-17 and NBG-18 are manufactured using pitch coke, and are vibrationally molded. These medium grain products are produced by SGL Carbon SAS (France). Tayo Tanso (Japan) produces IG-430 which is a petroleum coke, isostatically molded, nuclear grade graphite. And PCEA is a medium grain, extruded graphite produced by UCAR Carbon Co. (USA) from petroleum coke. An experimental program has been initiated to develop physical and mechanical properties data for these current candidate graphites. The results will be judged against the requirements for nuclear grade graphites set forth in ASTM standard D 7219-05 "Standard Specification for Isotropic and Near-isotropic Nuclear Graphites". Physical properties data including thermal conductivity and coefficient of thermal expansion, and mechanical properties data including tensile, compressive and flexural strengths will be obtained using the established test methods covered in D-7219 and ASTM C 781-02 "Standard Practice for Testing Graphite and Boronated Graphite Components for High-Temperature Gas-Cooled Nuclear Reactors". Various factors known to effect the properties of graphites will be investigated. These include specimen size, spatial location within a graphite billet, specimen orientation (ag and wg) within a billet, and billet-to-billet variations. The current status of the materials characterization program is reported herein. To date billets of the four graphite grades have been procured, and detailed cut up plans for obtaining the various specimens have been prepared. Particular attention has been given to the traceability of each specimen to its spatial location and orientation within a billet.

  4. Stabilizing soft fine-grained soils with fly ash

    SciTech Connect (OSTI)

    Edil, T.B.; Acosta, H.A.; Benson, C.H.

    2006-03-15

    The objective of this study was to evaluate the effectiveness of self-cementing fly ashes derived from combustion of subbituminous coal at electric power plants for stabilization of soft fine-grained soils. California bearing ratio (CBR) and resilient modulus (M{sub r}) tests were conducted on mixtures prepared with seven soft fine-grained soils (six inorganic soils and one organic soil) and four fly ashes. The soils were selected to represent a relatively broad range of plasticity, with plasticity indices ranging between 15 and 38. Two of the fly ashes are high quality Class C ashes (per ASTM C 618) that are normally used in Portland cement concrete. The other ashes are off-specification ashes, meaning they do not meet the Class C or Class F criteria in ASTM C 618. Tests were conducted on soils and soil-fly ash mixtures prepared at optimum water content (a standardized condition), 7% wet of optimum water content (representative of the typical in situ condition in Wisconsin), and 9-18% wet of optimum water content (representative of a very wet in situ condition). Addition of fly ash resulted in appreciable increases in the CBR and M{sub r} of the inorganic soils. For water contents 7% wet of optimum, CBRs of the soils alone ranged between 1 and 5. Addition of 10% fly ash resulted in CBRs ranging between 8 and 17, and 18% fly ash resulted in CBRs between 15 and 31. Similarly, M{sub r} of the soil alone ranged between 3 and 15 MPa at 7% wet of optimum, whereas addition of 10% fly ash resulted in M{sub r} between 12 and 60 MPa and 18% fly ash resulted in M{sub r} between 51 and 106 MPa. In contrast, except for one fly ash, addition of fly ash generally had little effect on CBR or M{sub r} of the organic soil.

  5. Management of dry flue gas desulfurization by-products in underground mines. Annual report, October 1993--September 1994

    SciTech Connect (OSTI)

    Chugh, Y.P.; Dutta, D.; Esling, S.; Ghafoori, N.; Paul, B.; Sevim, H.; Thomasson, E.

    1994-10-01

    Preliminary environmental risk assessment on the FGD by-products to be placed underground is virtually complete. The initial mixes for pneumatic and hydraulic placement have been selected and are being subject to TCLP, ASTM, and modified SLP shake tests as well as ASTM column leaching. Results of these analyses show that the individual coal combustion residues, and the residues mixes, are non-hazardous in character. Based on available information, including well logs obtained from Peabody Coal Company, a detailed study of the geology of the placement site was completed. The study shows that the disposal site in the abandoned underground mine workings at depths of between 325 and 375 feet are well below potable groundwater resources. This, coupled with the benign nature of the residues and residues mixtures, should alleviate any concern that the underground placement will have adverse effects on groundwater resources. Seven convergence stations were installed in the proposed underground placement area of the Peabody Coal Company No. 10 mine. Several sets of convergence data were obtained from the stations. A study of materials handling and transportation of coal combustion residues from the electric power plant to the injection site has been made. The study evaluated the economics of the transportation of coal combustion residues by pneumatic trucks, by pressure differential rail cars, and by SEEC, Inc. collapsible intermodal containers (CICs) for different annual handling rates and transport distances. The preliminary physico-chemical characteristics and engineering properties of various FBC fly ash-spent bed mixes have been determined, and long-term studies of these properties are continuing.

  6. Materials Solutions for Hydrogen Delivery in Pipelines

    SciTech Connect (OSTI)

    Ningileri, Shridas T.; Boggess, Todd A; Stalheim, Douglas

    2013-01-02

    The main objective of the study is as follows: Identify steel compositions/microstructures suitable for construction of new pipeline infrastructure and evaluate the potential use of the existing steel pipeline infrastructure in high pressure gaseous hydrogen applications. The microstructures of four pipeline steels were characterized and tensile testing was conducted in gaseous hydrogen and helium at pressures of 5.5 MPa (800 psi), 11 MPa (1600 psi) and 20.7 MPa (3000 psi). Based on reduction of area, two of the four steels that performed the best across the pressure range were selected for evaluation of fracture and fatigue performance in gaseous hydrogen at 5.5 MPa (800 psi) and 20.7 MPa (3000 psi). The basic format for this phase of the study is as follows: Microstructural characterization of volume fraction of phases in each alloy; Tensile testing of all four alloys in He and H{sub 2} at 5.5 MPa (800 psi), 11 MPa (1600 psi), and 20.7 MPa (3000 psi). RA performance was used to choose the two best performers for further mechanical property evaluation; Fracture testing (ASTM E1820) of two best tensile test performers in H{sub 2} at 5.5 MPa (800 psi) and 20.7 MPa (3000 psi); Fatigue testing (ASTM E647) of two best tensile test performers in H2 at 5.5 MPa (800 psi) and 20.7 MPa (3000 psi) with frequency =1.0 Hz and R-ratio=0.5 and 0.1.

  7. Irradiation-assisted stress corrosion cracking of austenitic stainless steels: Recent progress and new approaches

    SciTech Connect (OSTI)

    Chung, H.M.; Ruther, W.E.; Sanecki, J.E.; Hins, A.; Zaluzec, N.J.; Kassner, T.F.

    1996-09-01

    Irradiation-assisted stress corrosion cracking (IASCC) of several types of BWR field components fabricated from solution-annealed austenitic stainless steels (SSs), including a core internal weld, were investigated by means of slow-strain-rate test (SSRT), scanning electron microscopy (SEM), Auger electron spectroscopy (AES), and field-emission-gun advanced analytical electron microscopy (FEG-AAEM). Based on the results of the tests and analyses, separate effects of neutron fluence, tensile properties, alloying elements and major impurities identified in the American Society for Testing and Materials (ASTM) specifications, minor impurities, water chemistry, and fabrication-related variables were determined. The results indicate strongly that minor impurities not specified by the ASTM-specifications play important roles, probably through a complex synergism with grain-boundary Cr depletion. These impurities, typically associated with steelmaking and component fabrication processes, are very low or negligible in solubility in steels and are the same impurities that have been known to promote intergranular SCC significantly when they are present in water as ions or soluble compounds. It seems obvious that IASCC is a complex integral problem which involves many variables that are influenced strongly by not only irradiation conditions, water chemistry, and stress but also iron and steelmaking processes, fabrication of the component, and joining and welding. Therefore, for high-stress components in particular, it would be difficult to mitigate IASCC problems at high fluence based on the consideration of water chemistry alone, and other considerations based on material composition and fabrication procedure would be necessary as well.

  8. Microstructural characterization of as-cast biocompatible Co-Cr-Mo alloys

    SciTech Connect (OSTI)

    Giacchi, J.V.; Morando, C.N.; Fornaro, O.; Palacio, H.A.

    2011-01-15

    The microstructure of a cobalt-base alloy (Co-Cr-Mo) obtained by the investment casting process was studied. This alloy complies with the ASTM F75 standard and is widely used in the manufacturing of orthopedic implants because of its high strength, good corrosion resistance and excellent biocompatibility properties. This work focuses on the resulting microstructures arising from samples poured under industrial environment conditions, of three different Co-Cr-Mo alloys. For this purpose, we used: 1) an alloy built up from commercial purity constituents, 2) a remelted alloy and 3) a certified alloy for comparison. The characterization of the samples was achieved by using optical microscopy (OM) with a colorant etchant to identify the present phases and scanning electron microscopy (SE-SEM) and energy dispersion spectrometry (EDS) techniques for a better identification. In general the as-cast microstructure is a Co-fcc dendritic matrix with the presence of a secondary phase, such as the M{sub 23}C{sub 6} carbides precipitated at grain boundaries and interdendritic zones. These precipitates are the main strengthening mechanism in this type of alloys. Other minority phases were also reported and their presence could be linked to the cooling rate and the manufacturing process variables and environment. - Research Highlights: {yields}The solidification microstructure of an ASTM-F75 type alloy were studied. {yields}The alloys were poured under an industrial environment. {yields}Carbides and sigma phase identified by color metallography and scanning microscopy (SEM and EDS). {yields}Two carbide morphologies were detected 'blocky type' and 'pearlite type'. {yields}Minority phases were also detected.

  9. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Instituto de Fsica de So Carlos, Universidade de So Paulo, So Carlos-SP 13560-970" ... CreatorsAuthors contains: "Instituto de Fsica de So Carlos, Universidade de So ...

  10. Microsoft Word - Final 2012 Prepayment RFO Template as Amended...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    or any official statement as to a possible downgrading, suspension or withdrawal of any rating by Moody's, S&P or Fitch of the Bonds, or debt instruments of a character and...

  11. DOEF46001705.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ORGANIZATION LOCAL GOV'T INSTITUTION OF OTHER NONPROFIT C P SP OTHER (Specify) HIGHER EDUCATION ORGANIZATION 14. ACCOUNTING AND APPROPRIATIONS DATA: 15. EMPLOYER I.D. a. TIN: b. ...

  12. Microsoft Word - FORM46001.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    INDIVIDUAL ORGANIZATION LOCAL GOV'T INSTITUTION OF OTHER NONPROFIT C P SP OTHER (Specify) HIGHER EDUCATION ORGANIZATION 14. ACCOUNTING AND APPROPRIATIONS DATA: 15. EMPLOYER I.D. a. ...

  13. Notice of Financial Assistance Award

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LOCAL GOV'T INSTITUTION OF OTHER NONPROFIT C P SP OTHER (Specify) HIGHER EDUCATION ORGANIZATION 14. ACCOUNTING AND APPROPRIATIONS DATA: 15. EMPLOYER I.D. DE-FG36-10GO10589 a. ...

  14. Thermal Removal of Tritium from Concrete and Soil to Reduce Groundwate...

    Office of Environmental Management (EM)

    SP01 Savannah River Site & D-Area Heavy Water Processing Moderator Processing ... Z one 1 24 ft 28 ft Layer of C oarse G ravel. S oil from beneath 420-D S lab. Z one 2 Z ...

  15. Arctic Black Carbon Loading and Profile Using the Single-Particle...

    Office of Scientific and Technical Information (OSTI)

    Single-Particle Soot Photometer (SP2) Field Campaign Report Citation Details In-Document Search Title: Arctic Black Carbon Loading and Profile Using the Single-Particle Soot ...

  16. Bacillus MGA3 aspartokinase II gene

    DOE Patents [OSTI]

    Schendel, Frederick J.; Flickinger, Michael C.

    1993-01-01

    The present invention provides the isolated DNA sequence encoding the .alpha.B dimer subunit of the lysine-sensitive aspartokinase II isozyme from the thermophilic methylotrophic Bacillus sp. MGA3.

  17. EMGeo Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    methods (QMR in one case, and IDR in the other), both solvers are dominated by memory bandwidth intensive operations like sparse matrix-vector multiply (SpMV), dot...

  18. Microsoft Word - 200812-24_DSI-DraftContract_blackline.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    successor. 8.4.5.7 "S&P" shall mean Standard and Poor's Rating Services (a division of McGraw-Hill, Inc.) or its successor. 9. EMPLOYMENT EXPENDITURES AND CAPITAL INVESTMENT 9.1...

  19. Microsoft Word - 200812-24_DSI-DraftContract_redline.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    successor. 8.4.5.7 "S&P" shall mean Standard and Poor's Rating Services (a division of McGraw-Hill, Inc.) or its successor. 9. EMPLOYMENT EXPENDITURES AND CAPITAL INVESTMENT 9.1...

  20. Microsoft Word - DSI Block 12_05_08.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    successor. 8.4.5.7 "S&P" shall mean Standard and Poor's Rating Services (a division of McGraw-Hill, Inc.) or its successor. 9. EMPLOYMENT EXPENDITURES AND CAPITAL INVESTMENT 9.1...