Sample records for assigned callaway costs

  1. Missouri Nuclear Profile - Callaway

    U.S. Energy Information Administration (EIA) Indexed Site

    Callaway" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration date"...

  2. Soil chemical properties of the residuum of Callaway County, Missouri

    SciTech Connect (OSTI)

    Biggs, T.C. (REACT Environmental Engineers, St. Louis, MO (United States)); Bolter, E. (Univ. of Missouri, Rolla, MO (United States). Dept. of Geology and Geophysics)

    1993-03-01T23:59:59.000Z

    Soil samples of Callaway County, Missouri, were analyzed for soil pH, clay mineralogy, free iron and manganese oxides, total organic carbon content (TOC), and cation exchange capacity (CEC). The soil samples represent Ordovician, Devonian, Mississippian and Pennsylvanian residuum. In addition, alluvium, loess, colluvium and glacial till samples were analyzed. The clay minerals consist of kaolinite, illite, smectite and illite-smectite mixed layers, iron and manganese oxide content ranges from 0.137 to 2.87% and 0.003 to 0.082% respectively, while TOC values range from 0.03 to 3.00%. The CEC values show a wide range from 5 to 89 milliequivalent/100 grams. The influence of the different soil constituents on the adsorption capacity of the soils is evaluated.

  3. Matlab assignment 5

    E-Print Network [OSTI]

    2010-06-17T23:59:59.000Z

    Matlab assignment 5. Read section 11 of Matlab for Math 303. Consider the heat equation with boundary condition. ?. ??. ?? uxx = ut u(x,0) = x u(0,t) = u(40,t)=†...

  4. Intergovernmental Personnel Act Assignments

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-08-24T23:59:59.000Z

    This Manual implements provisions of the Intergovernmental Personnel Act (IPA) within the Department of Energy (DOE) and establishes requirements, responsibilities, and authority for effecting assignments under the Act. Does not cancel other directives.

  5. Homework Help for Exam 1 Assignments

    E-Print Network [OSTI]

    Devlin, Patrick M

    2014-08-15T23:59:59.000Z

    WebAssign Homework Hints: Lessons 1 ? 14. Lesson 1 assignment: - On every problem in every assignment, be aware that WebAssign is case sensitive; if a.

  6. Homework Help for Exam 1 Assignments

    E-Print Network [OSTI]

    Devlin, Patrick M

    2014-06-04T23:59:59.000Z

    WebAssign Homework Hints: Lessons 1 ? 8. Lesson 1 assignment: - On every problem in every assignment, be aware that WebAssign is case sensitive; if a.

  7. Assignment and communication

    E-Print Network [OSTI]

    Jones, Geraint

    be renamed by abbreviations, for example, if Windscale is an INT variable INT Sellafield IS Windscale : makes Sella#12;eld a name for the same variable. Assignment to Sella#12;eld changes the value of Windscale, but it is not permitted to use the name of Windscale in the scope of the declaration of Sella#12;eld . It is a good idea

  8. TIGER:Thermal-Aware File Assignment in Storage Clusters

    E-Print Network [OSTI]

    Qin, Xiao

    % of total energy consumption [4]. Energy and cooling cost caused by data nodes motivate us to study file for clusters by offering about 10 to 15 percent cooling energy savings without significantly degrading I--In this paper, we present thermal-aware file assign- ment technique called TIGER for reducing cooling cost

  9. MATLAB: Introduction Part 1 Assignment

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    MATLAB: Introduction Part 1 ­ Assignment Bruno Abreu Calfa Assigned: September 8th , 2011 Due Calculate the value of the function y(x) = |x| sin x2 for values of x = 3 and 6 . Hint 1: Use the MATLAB

  10. Plug-in Hybrid Powertrain Modeling Scott J. Moura, Hosam K. Fathy, Duncan S. Callaway, Jeffrey L. Stein Slide 1 of 15

    E-Print Network [OSTI]

    Krstic, Miroslav

    ) decreases the cost per gallon of gasoline equivalent. Chevrolet Volt Concept Car at 2007 NAIAS Source with "blending"? Problem Statement Develop a control-oriented model of sufficient fidelity and minimal complexity

  11. Sponsored Project Account Cost Transfer Explanation

    E-Print Network [OSTI]

    He, Chuan

    Sponsored Project Account Cost Transfer Explanation Check-Off List December 2011 The explanations checked below best describe the reasons for why the cost transfers are being made. Costs as to how to allocate the cost, temporarily assigned the cost to an existing account that acted

  12. Preparing for Project Implementation Assigning Accountability...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assigning Accountability for Each Project, April 14, 2010 Preparing for Project Implementation Assigning Accountability for Each Project, April 14, 2010 Assigning Accountability...

  13. 1. Introduction Assign team leaders

    E-Print Network [OSTI]

    de Lijser, Peter

    /call/freq Indirect fire/call/freq Air support/call/freq Confirm dis/azimuth Notional security AA location PIR ROE1. Introduction Assign team leaders Assign map man and time keeper Security SOP specialty teams schedules j. PIR k.ROE l. Signals to initiate attack m. Specialty teams n.Contingency plans...indirect fire

  14. Scalability of dynamic traffic assignment

    E-Print Network [OSTI]

    Wen, Yang, Ph. D. Massachusetts Institute of Technology

    2009-01-01T23:59:59.000Z

    This research develops a systematic approach to analyze the computational performance of Dynamic Traffic Assignment (DTA) models and provides solution techniques to improve their scalability for on-line applications for ...

  15. Unclassified Foreign Visits and Assignments

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-06-18T23:59:59.000Z

    To define a program for unclassified foreign national access to Department of Energy sites, information, and technologies. This Order cancels DOE P 142.1, Unclassified Foreign Visits and Assignments, dated 7-14-99; DOE N 142.1, Unclassified Foreign Visits and Assignments, dated 7-14-99; Secretarial Memorandum Unclassified Foreign Visits and Assignments, dated 7-14-99; Memorandum from Francis S. Blake, Departmental Use of Foreign Access Central Tracking System, dated 11-05-01; Memorandum from Kyle E. McSlarrow, Interim Guidance for Implementation of the Department's Unclassified Foreign Visits and Assignments Program, dated 12-17-02; and Secretarial Memorandum, Policy Exclusion for Unclassified Foreign National's Access to Department of Energy Facilities in Urgent or Emergency Medical Situations, dated 4-10-01. Cancels: DOE P 142.1 and DOE N 142.1

  16. Unclassified Foreign Visits and Assignments

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-14T23:59:59.000Z

    To provide interim Department of Energy (DOE) requirements and responsibilities for unclassified visits and assignment by foreign nationals to DOE facilities for unclassified activities. This Notice supplements DOE P 142.1 dated 7-14-99, which sets overall Departmental policy on unclassified foreign visits and assignments. It is a complement to existing counterintelligence and security orders and policies. DOE N 251.53, dated 05/14/03, extends this directive until canceled. Cancels: DOE 1240.2B

  17. Startup Costs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    This chapter discusses startup costs for construction and environmental projects, and estimating guidance for startup costs.

  18. HW Help for Assignments after Exam 3

    E-Print Network [OSTI]

    Devlin, Patrick M

    2014-08-15T23:59:59.000Z

    WebAssign Homework Hints: Lessons 34 ? 40. Lesson 34 assignment: - On problem #1, verify that each graph represents a function (passes the vertical line

  19. Homework Help for Exam 3 Assignments

    E-Print Network [OSTI]

    Devlin, Patrick M

    2014-08-15T23:59:59.000Z

    WebAssign Homework Hints: Lessons 23 ? 33. Lesson 23 assignment: - On problem #1, the graph of the function given at the beginning of the problem is used†...

  20. Unclassified Foreign Visits and Assignments

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-14T23:59:59.000Z

    International cooperation and collaboration is an important element in the effective planning and implementation of many Department of Energy (DOE) programs. DOE and its international partners benefit from the exchange of information that results from a managed process of unclassified visits and assignments by foreign nationals. These visits and assignments must be conducted in a manner consistent with U.S. and DOE national security policies, requirements, and objectives including export control laws and regulations. Canceled by DOE O 142.3. Does not cancel other directives.

  1. SOPHIECASSON/THREEINABOX BY EWEN CALLAWAY

    E-Print Network [OSTI]

    Zhang, Jianzhi

    , dolphins also lack the ability to build working umami (which sense amino acids in proteins) and bitter for the changesislifestyle.Atsomepointinevolution- ary history, a shift in diet removed the need to sense certain chemicals speculates that thisancestralanimalmovedtoadietcomposed of protein-rich meat, devoid of sugary plants

  2. Callaway, Nebraska: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBoston Areais3:Information US

  3. Callaway Electric Cooperative | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWendeGuo FengBoulder, CO)Burundi:SalesCalifornia: Energy

  4. Operating Costs Estimates Cost Indices

    E-Print Network [OSTI]

    Boisvert, Jeff

    to update costs of specific equipment, raw material or labor or CAPEX and OPEX of entire plants Cost Indices

  5. Homework Help for Exam 2 Assignments

    E-Print Network [OSTI]

    Devlin, Patrick M

    2014-08-15T23:59:59.000Z

    WebAssign Homework Hints: Lessons 15 ? 22. Lesson 15 assignment: - Inequality signs are available in the calcPad under Relations. o To make the calcPad†...

  6. Cost Estimator

    Broader source: Energy.gov [DOE]

    A successful candidate in this position will serve as a senior cost and schedule estimator who is responsible for preparing life-cycle cost and schedule estimates and analyses associated with the...

  7. Operating Costs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    This chapter is focused on capital costs for conventional construction and environmental restoration and waste management projects and examines operating cost estimates to verify that all elements of the project have been considered and properly estimated.

  8. Test instances for the traffic assignment problem

    E-Print Network [OSTI]

    2008-01-08T23:59:59.000Z

    Jan 8, 2008 ... mation on test problems previously used in the literature to facilitate benchmarking. Keywords. Traffic assignment problem, BPR function,†...

  9. JOBAID-LAUNCHING AND COMPLETING ASSIGNED SURVEY

    Broader source: Energy.gov [DOE]

    The purpose of this job aid is to guide users through the step-by-step process of launching and completing assigned surverys.

  10. Policy for Dropped/Excused Assignments

    E-Print Network [OSTI]

    Devlin, Patrick M

    2015-01-01T23:59:59.000Z

    Policy for Dropped and Excused Quizzes/Homework. ē QUIZZES/HOMEWORK. On average, students can expect about 1 quiz and 3 homework assignments per

  11. Solving Multiagent Assignment Markov Decision Scott Proper

    E-Print Network [OSTI]

    681 Solving Multiagent Assignment Markov Decision Processes Scott Proper Oregon State University]. On the Cite as: Solving Multiagent Assignment Markov Decision Processes, Scott Proper and Prasad Tadepalli, Sierra and Castelfranchi (eds.), May, 10­15, 2009, Bu- dapest, Hungary, pp. XXX-XXX. Copyright c 2009

  12. Housing & Residential Life Contracts, Assignments & Billing

    E-Print Network [OSTI]

    Minnesota, University of

    Housing & Residential Life Contracts, Assignments & Billing Comstock Hall-East 210 Delaware St. SE & Residential Life. For the fall semester, I will cancel on or before August 7. For the spring semester, I day until Housing & Residential Life is able to fill my assigned space with a student from the waiting

  13. Evaluation of Dynamic Channel and Power Assignment for Cognitive Networks

    SciTech Connect (OSTI)

    Syed A. Ahmad; Umesh Shukla; Ryan E. Irwin; Luiz A. DaSilva; Allen B. MacKenzie

    2011-03-01T23:59:59.000Z

    In this paper, we develop a unifying optimization formulation to describe the Dynamic Channel and Power Assignment (DCPA) problem and evaluation method for comparing DCPA algorithms. DCPA refers to the allocation of transmit power and frequency channels to links in a cognitive network so as to maximize the total number of feasible links while minimizing the aggregate transmit power. We apply our evaluation method to five algorithms representative of DCPA used in literature. This comparison illustrates the tradeoffs between control modes (centralized versus distributed) and channel/power assignment techniques. We estimate the complexity of each algorithm. Through simulations, we evaluate the effectiveness of the algorithms in achieving feasible link allocations in the network, as well as their power efficiency. Our results indicate that, when few channels are available, the effectiveness of all algorithms is comparable and thus the one with smallest complexity should be selected. The Least Interfering Channel and Iterative Power Assignment (LICIPA) algorithm does not require cross-link gain information, has the overall lowest run time, and highest feasibility ratio of all the distributed algorithms; however, this comes at a cost of higher average power per link.

  14. Electricity Suppliers' Service Area Assignments (Indiana)

    Broader source: Energy.gov [DOE]

    To promote efficiency and avoid waste and duplication, rural and unincorporated areas of Indiana are divided into geographic areas, to be assigned to an electricity provider that will have the sole...

  15. Frugal Sensor Assignment Matthew P. Johnson1

    E-Print Network [OSTI]

    Preece, Alun

    Frugal Sensor Assignment Matthew P. Johnson1 Hosam Rowaihy2 Diego Pizzocaro3 Amotz Bar-Noy1 Stuart many simultaneous missions. While the current user #12;2 Johnson, Rowaihy, Pizzocaro, Bar-Noy, Chalmers

  16. JOBAID-SELF ASSIGNING COURSES (ITEMS)

    Broader source: Energy.gov [DOE]

    In this jobaid you will learn to use the Course Catalog, Browse Catalog, Recommended Items, Locate and Self-Assign Items (Courses) Using the Search Catalog features, Narrow Course Searches using...

  17. FRNSC 597A, Fall 2014 Assignment #3

    E-Print Network [OSTI]

    Hunter, David

    in mind the guidelines for assignment #2, which are reproduced here in modified form: 1. What measure along with details about the scale on which they are measured, such as whether

  18. assignment systems requirements: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    or partial Atiquzzaman, Mohammed 4 Linear Assignment Maps for Correlated System-Environment States Quantum Physics (arXiv) Summary: An assignment map is a mathematical...

  19. Types of Costs Types of Cost Estimates

    E-Print Network [OSTI]

    Boisvert, Jeff

    ∑ Types of Costs ∑ Types of Cost Estimates ∑ Methods to estimate capital costs MIN E 408: Mining% accuracy. ≠ 2-5% of pre-production capital Types of Cost Estimates #12;3. Definitive ≠ Based on definitive-even $ Production Level Fixed Cost Break-even $ Production Level Cost-Revenue Relationships ∑ Capital Costs (or

  20. Handbook for cost estimating. A method for developing estimates of costs for generic actions for nuclear power plants

    SciTech Connect (OSTI)

    Ball, J.R.; Cohen, S.; Ziegler, E.Z.

    1984-10-01T23:59:59.000Z

    This document provides overall guidance to assist the NRC in preparing the types of cost estimates required by the Regulatory Analysis Guidelines and to assist in the assignment of priorities in resolving generic safety issues. The Handbook presents an overall cost model that allows the cost analyst to develop a chronological series of activities needed to implement a specific regulatory requirement throughout all applicable commercial LWR power plants and to identify the significant cost elements for each activity. References to available cost data are provided along with rules of thumb and cost factors to assist in evaluating each cost element. A suitable code-of-accounts data base is presented to assist in organizing and aggregating costs. Rudimentary cost analysis methods are described to allow the analyst to produce a constant-dollar, lifetime cost for the requirement. A step-by-step example cost estimate is included to demonstrate the overall use of the Handbook.

  1. DEMAND SIMULATION FOR DYNAMIC TRAFFIC ASSIGNMENT

    E-Print Network [OSTI]

    Bierlaire, Michel

    of the response of travelers to real-time pre- trip information. The demand simulator is an extension of dynamicDEMAND SIMULATION FOR DYNAMIC TRAFFIC ASSIGNMENT Constantinos Antoniou, Moshe Ben-Akiva, Michel Bierlaire, and Rabi Mishalani Massachusetts Institute of Technology, Cambridge, MA 02139 Abstract

  2. Blackboard SafeAssign Building Blocks Student

    E-Print Network [OSTI]

    logo, Blackboard Academic Suite, Blackboard Learning System, Blackboard Learning System ML, Blackboard of academic papers to identify areas of overlap between the submitted assignment and existing works. Safe with over 1,100 publication titles and about 2.6 million articles from 1990s to present time, updated weekly

  3. GIS and Geospatial applications Assignment 7

    E-Print Network [OSTI]

    Hung, I-Kuai

    GIS and Geospatial applications Assignment 7 Point Pattern Analysis By: Leigh Stuemke Presented to Analysis allows GIS users to infer spatial relationships among their datasets using both visual. We then utilized point pattern analysis methods to determine if we should reject or fail to reject

  4. Paper Number (Assigned by IFPE Staff)

    E-Print Network [OSTI]

    Li, Perry Y.

    Paper Number (Assigned by IFPE Staff) Compressed Air Energy Storage for Offshore Wind Turbines pumped hydro, compressed air energy storage, a variety of battery chemistries, capacitors, flywheels of this paper, compressed air energy storage, is highly scalable, reasonably inexpensive, provides moderate ramp

  5. assignments processes and if-then-else

    E-Print Network [OSTI]

    Chamberlain, Roger

    not sequential execution! Vector Assignments -- Binary Coded Decimal to Excess 3 converter -- xs3 bcd + 3 circuits ¬Ľ circuits are inherently parallel with many things going on at once Binary Coded Decimal to Excess-3 Code W=A+BC+BD X=B'C+B'D+BC'D' Y=CD+C'D' Z=D' -- Binary Coded Decimal to Excess 3 converter

  6. Problem Set 5 Assigned October 25 2012

    E-Print Network [OSTI]

    Jacobs, David

    sigma to sigma*k*k*k*k*k. Include these six images when you turn in your assignment. 2. 40 points: Blob of images, by smoothing them repeatedly. We choose the magic numbers sigma = 1.6 and k = 21/3 . Given these numbers, we want to smooth an input image using a Gaussian with a standard deviation of sigma, sigma

  7. Problem Set 5 Assigned April 1 2010

    E-Print Network [OSTI]

    Jacobs, David

    ranging from sigma to sigma*k*k*k*k*k. Include these six images when you turn in your assignment. Note representation of images, by smoothing them repeatedly. We choose the magic numbers sigma = 1.6 and k = 21/3 . Given these numbers, we want to smooth an input image by sigma, sigma*k, sigma*k*k, sigma

  8. STAT 3843A Fall 2013 Assignment 2

    E-Print Network [OSTI]

    Murdoch, Duncan

    STAT 3843A Fall 2013 Assignment 2 Due: October 11 on paper in class 1. For any sampling scheme, i of the students to be equal to the last 5 digits of your student id number. (For example, if your id is 250766362

  9. Housing & Residential Life Contracts, Assignments & Billing

    E-Print Network [OSTI]

    Amin, S. Massoud

    Housing & Residential Life Contracts, Assignments & Billing Comstock Hall-East 210 Delaware St. SE.housing.umn.edu/contractbook. I hereby agree to comply with all University of Minnesota and Housing & Residential Life policies to promptly notify Housing & Residential Life of any felony or misdemeanor charge or conviction prior

  10. Types of Costs Types of Cost Estimates

    E-Print Network [OSTI]

    Boisvert, Jeff

    05-1 ∑ Types of Costs ∑ Types of Cost Estimates ∑ Methods to estimate capital costs MIN E 408-Revenue Relationships ∑ Capital Costs (or first cost or capital investment): ≠ Expenditures made to acquire or develop capital assets ≠ Three main classes of capital costs: 1. Depreciable Investment: ∑ Investment allocated

  11. New Issue: Moody's assigns Aa1 ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    borrowing line and federal debt service deferral ability -Regional importance as indirect power provider for 12 million people -Access to 22 GW of low cost, federally owned hydro...

  12. Estimating Specialty Costs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    Specialty costs are those nonstandard, unusual costs that are not typically estimated. Costs for research and development (R&D) projects involving new technologies, costs associated with future regulations, and specialty equipment costs are examples of specialty costs. This chapter discusses those factors that are significant contributors to project specialty costs and methods of estimating costs for specialty projects.

  13. Unclassified Foreign Visits and Assignments Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-06-18T23:59:59.000Z

    The order defines a program for unclassified foreign national access to Department of Energy sites, information, and technologies. The page change streamlines the HQs Management Panel review process to include reviews by HSS, IN, and a representative of the cognizant under secretary for access requests involving foreign nationals. Cancels Secretarial Memorandum, Unclassified Foreign Visits and Assignments, dated 7-14-99; Memorandum from Francis S. Blake, Departmental Use of Foreign Access Central Tracking System, dated 11-05-01; Memorandum from Kyle E. McSlarrow, Interim Guidance for Implementation of the Department's Unclassified Foreign Visits and Assignments Program, dated 12-17-02; and Secretarial Memorandum, Policy Exclusion for Unclassified Foreign National's Access to Department of Energy Facilities in Urgent or Emergency Medical Situations, dated 4-10-01. Cancels: DOE P 142.1 and DOE N 142.1

  14. Trace Assignment Adam Leroy, AY 203

    E-Print Network [OSTI]

    Backer, Don

    Trace Assignment Adam Leroy, AY 203 VLT Optics I tracked down optical components for the VLT on the web and came up with the following speci­ fication: Quantity Value r p 28800 mm k p \\Gamma1:004616 r s \\Gamma4553:57 mm k s \\Gamma1:66926 The primary has an effective inner radius of 1000 mm and and outer

  15. A complete backbone spectral assignment of human apolipoprotein...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    complete backbone spectral assignment of human apolipoprotein AI on a 38 kDa pre?HDL (Lp1-AI) particle . A complete backbone spectral assignment of human apolipoprotein AI on...

  16. Employee Replacement Costs

    E-Print Network [OSTI]

    Dube, Arindrajit; Freeman, Eric; Reich, Michael

    2010-01-01T23:59:59.000Z

    Employee Replacement Costs Arindrajit Dube, Eric Freeman andproperties of employee replacement costs, using a panel2008. We establish that replacement costs are sub- stantial

  17. Assign Ad Hoc Reviewer Step-By-Step Procedure

    E-Print Network [OSTI]

    Shyy, Wei

    Proposal Management Reviewer Assign Ad Hoc Reviewer Step-By-Step Procedure Last updated: 12/19/2013 1 of 2 http://eresearch.umich.edu Assign an Ad Hoc Reviewer Based on the information provided as a Reviewer. Anyone who has an account in the system can be added as an Ad Hoc Reviewer. Who Can Assign Ad Hoc

  18. GA CLASSROOM ASSIGNMENT PROCEDURES POST-PUBLICATION REASONS YOU MAY WANT TO CHANGE A CLASSROOM ASSIGNMENT

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    for new classrooms must be initiated in ISIS. The transactional interface, which communicates between ISIS, the facility ID shown in ISIS should not be considered valid. The interface will automatically update the facility ID once the room assignment information is sent back to ISIS from R25. There could be a delay

  19. Glossary of Intellectual Property related terminology Assigned Duty of Employment (or Assigned Duty)

    E-Print Network [OSTI]

    Salama, Khaled

    ) Duty(ies) or activity(ies), within an employee's Scope of Employment, that an employer assigns research agreement. that is patentable, copyrightable, a trade secret, or otherwise protectable efforts to protect or to commercialize these Inventions back to that funding agency. The Act also reserves

  20. BY EWEN CALLAWAY he iconic status of Archaeopteryx, the

    E-Print Network [OSTI]

    Napp, Nils

    up in limestone quarries in Bavaria, southern Germany, in the early 1860s. Until recently, they were

  1. Village of Callaway, Nebraska (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformation UCOpenVerona, NewViking-McBain BiomassBeachBradner,

  2. Callaway County, Missouri: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBoston Areais3:Information US Recovery

  3. NPR (New Production Reactor) capacity cost evaluation

    SciTech Connect (OSTI)

    none,

    1988-07-01T23:59:59.000Z

    The ORNL Cost Evaluation Technical Support Group (CETSG) has been assigned by DOE-HQ Defense Programs (DP) the task defining, obtaining, and evaluating the capital and life-cycle costs for each of the technology/proponent/site/revenue possibilities envisioned for the New Production Reactor (NPR). The first part of this exercise is largely one of accounting, since all NPR proponents use different accounting methodologies in preparing their costs. In order to address this problem of comparing ''apples and oranges,'' the proponent-provided costs must be partitioned into a framework suitable for all proponents and concepts. If this is done, major cost categories can then be compared between concepts and major cost differences identified. Since the technologies proposed for the NPR and its needed fuel and target support facilities vary considerably in level of technical and operational maturity, considerable care must be taken to evaluate the proponent-derived costs in an equitable manner. The use of cost-risk analysis along with derivation of single point or deterministic estimates allows one to take into account these very real differences in technical and operational maturity. Chapter 2 summarizes the results of this study in tabular and bar graph form. The remaining chapters discuss each generic reactor type as follows: Chapter 3, LWR concepts (SWR and WNP-1); Chapter 4, HWR concepts; Chapter 5, HTGR concept; and Chapter 6, LMR concept. Each of these chapters could be a stand-alone report. 39 refs., 36 figs., 115 tabs.

  4. Task Assignment in a Server Farm with Switching Delays and

    E-Print Network [OSTI]

    Hyytiä, Esa

    costs Holding costs (per job) Objective to balance between Energy consumption Performance (e.g., latency Energy- and Delay-aware cost structure Switching costs Running costs Holding costs (per job) Objective to balance between Energy consumption Performance (e.g., latency) Heterogeneous servers, job-specific costs

  5. Cost Model and Cost Estimating Software

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    This chapter discusses a formalized methodology is basically a cost model, which forms the basis for estimating software.

  6. Costing of Joining Methods -Arc Welding Costs

    E-Print Network [OSTI]

    Colton, Jonathan S.

    Costing of Joining Methods - Arc Welding Costs ver. 1 ME 6222: Manufacturing Processes and Systems.S. Colton © GIT 2009 5 #12;LaborLabor Di t ti f ldi· Direct time of welding ­ time to produce a length of weld ­ labor rate ­ multiplication gives labor cost per length · Set-up time, etc. · Personal time

  7. assigning backbone resonances: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    16 4. 2 Critical Book or Journal Review, think and write. Helping to plan - Assignment Survival Kit Define the question and identify University of...

  8. An efficient method to compute traffic assignment problems with ...

    E-Print Network [OSTI]

    2006-07-26T23:59:59.000Z

    assign to the drivers who travel on a transportation network from some ... In most formulations, the number of drivers who want to travel from a specific origin.

  9. assigning dose based: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute of Technology 2014-01-01 16 Hypothesis-Based Concept Assignment to Support Software Maintenance Computer Technologies and Information Sciences Websites Summary: of...

  10. Optimization Online - Test instances for the traffic assignment problem

    E-Print Network [OSTI]

    Frťdťric Babonneau

    Abstract: This short note on the Traffic Assignment Problem (TAP) provides the relevant information on test problems previously used in the literature to facilitate

  11. On Computation of Performance Bounds of Optimal Index Assignment

    E-Print Network [OSTI]

    2010-01-20T23:59:59.000Z

    assignment can be classified as a joint source-channel coding technique because the ... distortion of VQ systems operating in BSC, over all possible index

  12. Activity Based Costing

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    Activity Based Costing (ABC) is method for developing cost estimates in which the project is subdivided into discrete, quantifiable activities or a work unit. This chapter outlines the Activity Based Costing method and discusses applicable uses of ABC.

  13. POLE ASSIGNMENT FOR A VIBRATING SYSTEM WITH AERODYNAMIC EFFECT #

    E-Print Network [OSTI]

    Chou, So-Hsiang

    POLE ASSIGNMENT FOR A VIBRATING SYSTEM WITH AERODYNAMIC EFFECT # J. N. WANG + , S. H. CHOU # , Y. C­input state feedback control arising from a one­dimensional vibrating system with aerodynamic e real axis. Key words. vibrating system, aerodynamic e#ect, state feedback control, pole assignment AMS

  14. POLE ASSIGNMENT FOR A VIBRATING SYSTEM WITH AERODYNAMIC EFFECT

    E-Print Network [OSTI]

    Lin, Wen-Wei

    POLE ASSIGNMENT FOR A VIBRATING SYSTEM WITH AERODYNAMIC EFFECT J. N. WANG, S. H. CHOU, Y. C. CHEN feedback control arising from a one-dimensional vibrating system with aerodynamic effect. On the practical real axis. Key words. vibrating system, aerodynamic effect, state feedback control, pole assignment AMS

  15. Learning to Rank and Quadratic Assignment Thomas Mensink

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Learning to Rank and Quadratic Assignment Thomas Mensink TVPA - XRCE & LEAR - INRIA Grenoble NICTA Sydney, Australia Abstract In this paper we show that the optimization of several ranking of quadratic assignment problems. Both the task of test-time predic- tion of the best ranking and the task

  16. Linear Sum Assignment Algorithms for Distributed Multi-robot Systems

    E-Print Network [OSTI]

    Liu, Lantao

    2013-04-30T23:59:59.000Z

    Multi-robot task assignment (allocation) involves assigning robots to tasks in order to optimize the entire teamís performances. Until now, one of the most useful non-domain-specific ways to coordinate multi-robot systems is through task allocation...

  17. HAIM GAIFMAN REASONING WITH LIMITED RESOURCES AND ASSIGNING

    E-Print Network [OSTI]

    Fitelson, Branden

    HAIM GAIFMAN REASONING WITH LIMITED RESOURCES AND ASSIGNING PROBABILITIES TO ARITHMETICAL problem of reasoning under limited deductive capacity. The second sketches a rigorous way of assigning character of subjective probabilities and beliefs. 1. LIMITED DEDUCTIVE ABILITY Two kinds of obstacles stand

  18. INDEPENDENT COST REVIEW (ICR) and INDEPENDENT COST ESTIMATE ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    INDEPENDENT COST REVIEW (ICR) and INDEPENDENT COST ESTIMATE (ICE) Standard Operating Procedures INDEPENDENT COST REVIEW (ICR) and INDEPENDENT COST ESTIMATE (ICE) Standard Operating...

  19. Audit of the Department of Energy`s management of field contractor employees assigned to headquarters and other federal agencies

    SciTech Connect (OSTI)

    NONE

    1997-12-05T23:59:59.000Z

    The Department of Energy (Department) has spent at least $76 million annually for field contractor employee support in Headquarters and other Federal agencies. The employees were to provide technical expertise and experience critical to Department operations and programs. Overall, the audit was performed to determine if the Department was managing the use of field contractor employees assigned to Headquarters and other Federal agencies. Specifically, it was to determine whether the Department reviews and evaluates the costs for the use of contractor employees, is reimbursed for contractors working at other Federal agencies, and had implemented corrective actions proposed as the result of a prior audit report on this subject. The Department did not effectively manage the use of field contractor employees assigned to Headquarters and other Federal agencies. Specifically, the Department was unable to identify all contractor employees assigned to the Washington, DC area or determine the total cost of maintaining them; some employees were providing routine support and administrative services rather than unique program expertise; and several of the Department`s contractors had assigned their employees to work in other agencies without receiving full reimbursement for their services. In addition, the Department did not fully implement the corrective actions it agreed to in the prior audit report. Recommendations were made for the Deputy Secretary based on the audit findings. 3 tabs.

  20. Contracting with reading costs and renegotiation costs

    E-Print Network [OSTI]

    Brennan, James R.

    2007-01-01T23:59:59.000Z

    OF CALIFORNIA, SAN DIEGO Contracting with Reading Costs andrents, and the competitive contracting process. Journal ofReiche. Foundation of incomplete contracting in a model of

  1. Systems Engineering Cost Estimation

    E-Print Network [OSTI]

    Bryson, Joanna J.

    on project, human capital impact. 7 How to estimate Cost? Difficult to know what we are building early on1 Systems Engineering Lecture 3 Cost Estimation Dr. Joanna Bryson Dr. Leon Watts University of Bath: Contrast approaches for estimating software project cost, and identify the main sources of cost

  2. Life Cycle Cost Estimate

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    Life-cycle costs (LCCs) are all the anticipated costs associated with a project or program alternative throughout its life. This includes costs from pre-operations through operations or to the end of the alternative.This chapter discusses life cycle costs and the role they play in planning.

  3. Cost Estimation Package

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    This chapter focuses on the components (or elements) of the cost estimation package and their documentation.

  4. OOTW COST TOOLS

    SciTech Connect (OSTI)

    HARTLEY, D.S.III; PACKARD, S.L.

    1998-09-01T23:59:59.000Z

    This document reports the results of a study of cost tools to support the analysis of Operations Other Than War (OOTW). It recommends the continued development of the Department of Defense (DoD) Contingency Operational Support Tool (COST) as the basic cost analysis tool for 00TWS. It also recommends modifications to be included in future versions of COST and the development of an 00TW mission planning tool to supply valid input for costing.

  5. Hydrogen refueling station costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

    2007-01-01T23:59:59.000Z

    Elec Del Cali: Del Investment Cost Delivery Cost OperatingCost Feedstock Cost Investment Cost Delivery Cost Operatingcosts Annualized investment cost, 1000$/yr Total annualized

  6. Engineering work breakdown and assignment for global product development

    E-Print Network [OSTI]

    Zamora Torres, Carlos Xavier

    2013-01-01T23:59:59.000Z

    Companies are always looking for ways to reduce their costs, cost reductions which allow companies to increase their overall profits. There are various cost reductions strategies, such as: change materials and/or design ...

  7. Linear assignment maps for correlated system-environment states

    SciTech Connect (OSTI)

    Rodriguez-Rosario, Cesar A.; Aspuru-Guzik, Alan [Department of Chemistry and Chemical Biology, Harvard University, Cambridge, Massachusetts (United States); Modi, Kavan [Centre for Quantum Technologies, National University of Singapore (Singapore)

    2010-01-15T23:59:59.000Z

    Assignment maps are mathematical operators that describe initial system-environment states for open quantum systems. We re-examine the notion of assignments that account for correlations between the system and the environment and show that these maps can be made linear at the expense of giving up positivity or consistency of the map. We study the role of positivity and consistency of the map and show the effects of relaxing these. Finally, we establish a connection between the violation of the positivity of linear assignments and the no-broadcasting theorem.

  8. Robust and decentralized task assignment algorithms for UAVs

    E-Print Network [OSTI]

    Alighanbari, Mehdi, 1976-

    2007-01-01T23:59:59.000Z

    This thesis investigates the problem of decentralized task assignment for a fleet of UAVs. The main objectives of this work are to improve the robustness to noise and uncertainties in the environment and improve the ...

  9. EARTH AND OCEAN SCIENCES 453 MATLAB homework assignment # 1

    E-Print Network [OSTI]

    Jellinek, Mark

    burning and the effects of deforestation. For now, ignore the effect of deforestation (which is currently considered in the following assignment. 1 #12;Box Model of Global Carbon Cycle Sea 5 Land Deforestation

  10. College of Arts and Sciences Space Assignment Policy (2012)

    E-Print Network [OSTI]

    Indiana University

    College of Arts and Sciences Space Assignment Policy (2012) 1. College engaged in research and creative activity The College space policy is intended to supplement and complement relevant campus policies, including the Policy

  11. Passenger-to-train assignment model based on automated data

    E-Print Network [OSTI]

    Zhu, Yiwen, S.M. Massachusetts Institute of Technology

    2014-01-01T23:59:59.000Z

    This thesis aims at developing a methodology for assigning passengers to individual trains using: (i) fare transaction records from Automatic Fare Collection (AFC) system and (ii) the train tracking data from Automatic ...

  12. On Computation of Performance Bounds of Optimal Index Assignment

    E-Print Network [OSTI]

    2011-08-07T23:59:59.000Z

    Dec 1, 2010 ... ... of QAP problems including those in the quadratic assignment problem library .... 1232-1254, 1996. [18] X. Y. Zhao, D. F. Sun, and K. C. Toh.

  13. Direct/Indirect Costs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    This chapter provides recommended categories for direct and indirect elements developed by the Committee for Cost Methods Development (CCMD) and describes various estimating techniques for direct and indirect costs.

  14. Environmental Cost Analysis

    E-Print Network [OSTI]

    Edge, D.

    Environmental Cost Analysis David Edge Texas Natural Resource Conservation Commission 131 ESL-IE-00-04-21 Proceedings from the Twenty-second National Industrial Energy Technology Conference, Houston, TX, April 5-6, 2000 Tuas Natural... Resource Conservation CorDDliuion Environmental Cost Analysis Presented By David Edge Determine the Costs c> Input co Output c> Hidden c> Capital (non recurring) Envirormenlal Cost Analy.;is "There has to be a measurable result...

  15. Power Plant Cycling Costs

    SciTech Connect (OSTI)

    Kumar, N.; Besuner, P.; Lefton, S.; Agan, D.; Hilleman, D.

    2012-07-01T23:59:59.000Z

    This report provides a detailed review of the most up to date data available on power plant cycling costs. The primary objective of this report is to increase awareness of power plant cycling cost, the use of these costs in renewable integration studies and to stimulate debate between policymakers, system dispatchers, plant personnel and power utilities.

  16. Cost effective lighting

    SciTech Connect (OSTI)

    Morse, O.; Verderber, R.

    1987-07-01T23:59:59.000Z

    Long-life replacement lamps for the incandescent lamp have been evaluated with regard to their cost effectiveness. The replacements include the use of energy buttons that extend lamp life as well as an adaptive fluorescent circline lamp that will fit into existing incandescent lamp sockets. The initial, operating, and replacement costs for one million lumen-hours are determined for each lamp system. We find the most important lighting cost component is the operating cost. Using lamps that are less efficient or devices that cause lamps to operate less efficiently are not cost-effective. The adaptive fluorescent circline lamp, even at an initial cost of $15.00, is the most cost effective source of illumination compared to the incandescent lamp and lamp systems examined. 3 refs., 6 tabs.

  17. Hydrogen Refueling Station Costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, J; Jianxin, Ma

    2006-01-01T23:59:59.000Z

    Costs Annualized Investment Cost, 1000$/yr Total AnnualizedH2 Fueling Stations Investment Cost Cost ($/yr) OperatingH2 Fueling Stations Investment Cost Cost ($/kg) Operating

  18. E-Print Network 3.0 - assigning individual weights Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary: - tation of assignments. The second problem is the one of es- timating the id of individual objects... . The assignments of individual observations to objects are...

  19. Cost analysis guidelines

    SciTech Connect (OSTI)

    Strait, R.S.

    1996-01-10T23:59:59.000Z

    The first phase of the Depleted Uranium Hexafluoride Management Program (Program)--management strategy selection--consists of several program elements: Technology Assessment, Engineering Analysis, Cost Analysis, and preparation of an Environmental Impact Statement (EIS). Cost Analysis will estimate the life-cycle costs associated with each of the long-term management strategy alternatives for depleted uranium hexafluoride (UF6). The scope of Cost Analysis will include all major expenditures, from the planning and design stages through decontamination and decommissioning. The costs will be estimated at a scoping or preconceptual design level and are intended to assist decision makers in comparing alternatives for further consideration. They will not be absolute costs or bid-document costs. The purpose of the Cost Analysis Guidelines is to establish a consistent approach to analyzing of cost alternatives for managing Department of Energy`s (DOE`s) stocks of depleted uranium hexafluoride (DUF6). The component modules that make up the DUF6 management program differ substantially in operational maintenance, process-options, requirements for R and D, equipment, facilities, regulatory compliance, (O and M), and operations risk. To facilitate a consistent and equitable comparison of costs, the guidelines offer common definitions, assumptions or basis, and limitations integrated with a standard approach to the analysis. Further, the goal is to evaluate total net life-cycle costs and display them in a way that gives DOE the capability to evaluate a variety of overall DUF6 management strategies, including commercial potential. The cost estimates reflect the preconceptual level of the designs. They will be appropriate for distinguishing among management strategies.

  20. Pension costs and liabilities

    E-Print Network [OSTI]

    Courtney, Harley Macon

    1961-01-01T23:59:59.000Z

    be to charge the cost over the current and subsequent years on the assumption that the cost, even though measured by past services, is incurred in contemplation of present and future 1 services. 1'he development of accounting thought concerning retire...? present liabilities are under- stated and owner's equity is overstated by a corresponding amount. It seems, however, that charging retained earnings with the past service cost does not, represent the true picture. Pension payments based solely on past...

  1. LMFBR fuel component costs

    SciTech Connect (OSTI)

    Epperson, E.M.; Borisch, R.R.; Rice, L.H.

    1981-10-29T23:59:59.000Z

    A significant portion of the cost of fabricating LMFBR fuels is in the non-fuel components such as fuel pin cladding, fuel assembly ducts and end fittings. The contribution of these to fuel fabrication costs, based on FFTF experience and extrapolated to large LMFBR fuel loadings, is discussed. The extrapolation considers the expected effects of LMFBR development programs in progress on non-fuel component costs.

  2. Hydrogen and Infrastructure Costs

    Broader source: Energy.gov (indexed) [DOE]

    FUEL CELL TECHNOLOGIES PROGRAM Hydrogen and Infrastructure Costs Hydrogen Infrastructure Market Readiness Workshop Washington D.C. February 17, 2011 Fred Joseck U.S. Department of...

  3. Target Cost Management Strategy

    E-Print Network [OSTI]

    Okano, Hiroshi

    1996-01-01T23:59:59.000Z

    Target cost management (TCM) is an innovation of Japanese management accounting system and by common sense has been considered with great interest by practitioners. Nowadays, TCM related

  4. ''When Cost Measures Contradict''

    SciTech Connect (OSTI)

    Montgomery, W. D.; Smith, A. E.; Biggar, S. L.; Bernstein, P. M.

    2003-05-09T23:59:59.000Z

    When regulators put forward new economic or regulatory policies, there is a need to compare the costs and benefits of these new policies to existing policies and other alternatives to determine which policy is most cost-effective. For command and control policies, it is quite difficult to compute costs, but for more market-based policies, economists have had a great deal of success employing general equilibrium models to assess a policy's costs. Not all cost measures, however, arrive at the same ranking. Furthermore, cost measures can produce contradictory results for a specific policy. These problems make it difficult for a policy-maker to determine the best policy. For a cost measures to be of value, one would like to be confident of two things. First one wants to be sure whether the policy is a winner or loser. Second, one wants to be confident that a measure produces the correct policy ranking. That is, one wants to have confidence in a policy measure's ability to correctly rank policies from most beneficial to most harmful. This paper analyzes empirically these two properties of different costs measures as they pertain to assessing the costs of the carbon abatement policies, especially the Kyoto Protocol, under alternative assumptions about implementation.

  5. Avoidable waste management costs

    SciTech Connect (OSTI)

    Hsu, K.; Burns, M.; Priebe, S.; Robinson, P.

    1995-01-01T23:59:59.000Z

    This report describes the activity based costing method used to acquire variable (volume dependent or avoidable) waste management cost data for routine operations at Department of Energy (DOE) facilities. Waste volumes from environmental restoration, facility stabilization activities, and legacy waste were specifically excluded from this effort. A core team consisting of Idaho National Engineering Laboratory, Los Alamos National Laboratory, Rocky Flats Environmental Technology Site, and Oak Ridge Reservation developed and piloted the methodology, which can be used to determine avoidable waste management costs. The method developed to gather information was based on activity based costing, which is a common industrial engineering technique. Sites submitted separate flow diagrams that showed the progression of work from activity to activity for each waste type or treatability group. Each activity on a flow diagram was described in a narrative, which detailed the scope of the activity. Labor and material costs based on a unit quantity of waste being processed were then summed to generate a total cost for that flow diagram. Cross-complex values were calculated by determining a weighted average for each waste type or treatability group based on the volume generated. This study will provide DOE and contractors with a better understanding of waste management processes and their associated costs. Other potential benefits include providing cost data for sites to perform consistent cost/benefit analysis of waste minimization and pollution prevention (WMIN/PP) options identified during pollution prevention opportunity assessments and providing a means for prioritizing and allocating limited resources for WMIN/PP.

  6. Apportioning Climate Change Costs

    E-Print Network [OSTI]

    Farber, Daniel A.

    2008-01-01T23:59:59.000Z

    Apportioning Climate Change Costs Daniel A. Farber* I. II.ON CLIMATE CHANGE FOUR QUESTIONS ABOUTof how to respond to climate change. Most public attention

  7. Please note the following requests and limitations for this appeal: Interview Date Name of Residency State City Type of expense Flight Cost Rental Car Cost Hotel Cost Gasoline Cost Other Cost-list and explain

    E-Print Network [OSTI]

    Cui, Yan

    of Residency State City Type of expense Flight Cost Rental Car Cost Hotel Cost Gasoline Cost Other Cost- list

  8. Updated 8/15/11 Undergraduate Academic Advising: Advisor Assignments in Banner1

    E-Print Network [OSTI]

    Kelly, Scott David

    Updated 8/15/11 1 Undergraduate Academic Advising: Advisor Assignments in Banner1 Academic Departments and Advising Centers are responsible for updating and "cleaning up" inaccurate academic advisor assignments in Banner. When a student is assigned a new or additional academic advisor, this assignment should

  9. An Examination of Avoided Costs in Utah

    E-Print Network [OSTI]

    Bolinger, Mark; Wiser, Ryan

    2005-01-01T23:59:59.000Z

    existing avoided cost methodology and established thefor certain avoided cost methodologies or avoided cost inpu

  10. Decommissioning Unit Cost Data

    SciTech Connect (OSTI)

    Sanford, P. C.; Stevens, J. L.; Brandt, R.

    2002-02-26T23:59:59.000Z

    The Rocky Flats Closure Site (Site) is in the process of stabilizing residual nuclear materials, decommissioning nuclear facilities, and remediating environmental media. A number of contaminated facilities have been decommissioned, including one building, Building 779, that contained gloveboxes used for plutonium process development but did little actual plutonium processing. The actual costs incurred to decommission this facility formed much of the basis or standards used to estimate the decommissioning of the remaining plutonium-processing buildings. Recent decommissioning activities in the first actual production facility, Building 771, implemented a number of process and procedural improvements. These include methods for handling plutonium contaminated equipment, including size reduction, decontamination, and waste packaging, as well as management improvements to streamline planning and work control. These improvements resulted in a safer working environment and reduced project cost, as demonstrated in the overall project efficiency. The topic of this paper is the analysis of how this improved efficiency is reflected in recent unit costs for activities specific to the decommissioning of plutonium facilities. This analysis will allow the Site to quantify the impacts on future Rocky Flats decommissioning activities, and to develop data for planning and cost estimating the decommissioning of future facilities. The paper discusses the methods used to collect and arrange the project data from the individual work areas within Building 771. Regression and data correlation techniques were used to quantify values for different types of decommissioning activities. The discussion includes the approach to identify and allocate overall project support, waste management, and Site support costs based on the overall Site and project costs to provide a ''burdened'' unit cost. The paper ultimately provides a unit cost basis that can be used to support cost estimates for decommissioning at other facilities with similar equipment and labor costs. It also provides techniques for extracting information from limited data using extrapolation and interpolation techniques.

  11. Transmission line capital costs

    SciTech Connect (OSTI)

    Hughes, K.R.; Brown, D.R.

    1995-05-01T23:59:59.000Z

    The displacement or deferral of conventional AC transmission line installation is a key benefit associated with several technologies being developed with the support of the U.S. Department of Energy`s Office of Energy Management (OEM). Previous benefits assessments conducted within OEM have been based on significantly different assumptions for the average cost per mile of AC transmission line. In response to this uncertainty, an investigation of transmission line capital cost data was initiated. The objective of this study was to develop a database for preparing preliminary estimates of transmission line costs. An extensive search of potential data sources identified databases maintained by the Bonneville Power Administration (BPA) and the Western Area Power Administration (WAPA) as superior sources of transmission line cost data. The BPA and WAPA data were adjusted to a common basis and combined together. The composite database covers voltage levels from 13.8 to 765 W, with cost estimates for a given voltage level varying depending on conductor size, tower material type, tower frame type, and number of circuits. Reported transmission line costs vary significantly, even for a given voltage level. This can usually be explained by variation in the design factors noted above and variation in environmental and land (right-of-way) costs, which are extremely site-specific. Cost estimates prepared from the composite database were compared to cost data collected by the Federal Energy Regulatory Commission (FERC) for investor-owned utilities from across the United States. The comparison was hampered because the only design specifications included with the FERC data were voltage level and line length. Working within this limitation, the FERC data were not found to differ significantly from the composite database. Therefore, the composite database was judged to be a reasonable proxy for estimating national average costs.

  12. Rapid Protein Structure Detection and Assignment using Residual Dipolar Couplings

    E-Print Network [OSTI]

    Rapid Protein Structure Detection and Assignment using Residual Dipolar Couplings Michael A substructures by exploiting the orientational constraint of residual dipolar coupling (RDC). PEPMORPH reverses: We have tested PEPMORPH on a variety of real proteins deposited in the Protein Data Base (PDB), using

  13. Optimal Link Assignments for All-Terminal Network Reliability

    E-Print Network [OSTI]

    Sutner, Klaus

    Optimal Link Assignments for All-Terminal Network Reliability Constantine Stivaros Computer Science are subject to failure have been exten- sively studied in the literature. Their reliability is regarded reliability measure, defined as the probability that the network remains connected after failures. Previous

  14. Math 110 Homework Assignment 21 due date: Mar. 18, 2013

    E-Print Network [OSTI]

    Roth, Mike

    Math 110 Homework Assignment 21 due date: Mar. 18, 2013 1. Consider a fish population with adult fish and young fish where the transition from one year's population to the next is 0.7 0.2 3 0 representing a 70% adult survival rate from year to year, a 20% survival rate for young fish, and the fact

  15. Document Assignment in Multi-site Search Engines Ulf Brefeld

    E-Print Network [OSTI]

    Brefeld, Ulf

    Document Assignment in Multi-site Search Engines Ulf Brefeld Yahoo! Research Barcelona, Spain to sites is critical for the perfor- mance of multi-site Web search engines. In such settings, sites crawl General Terms Design, Performance, Experimentation Keywords Multi-site web search engines, document

  16. AER1301: KINETIC THEORY OF GASES Assignment #2

    E-Print Network [OSTI]

    Groth, Clinton P. T.

    AER1301: KINETIC THEORY OF GASES Assignment #2 1. Using the formalism of the text book is as follows. Assume that the particle number density is a slowly varying function of the z coordinate #27; √? is a constant. 3. Show that if the potential function, U(r), varies as 1=r 4

  17. AER1301: KINETIC THEORY OF GASES Assignment #2

    E-Print Network [OSTI]

    Groth, Clinton P. T.

    AER1301: KINETIC THEORY OF GASES Assignment #2 1. Using the formalism of the text book the particle number density and temperature are both slowly varying functions of the z coordinate of the previous problem is as follows. Assume that the particle number density is a slowly varying function

  18. Liquid Crystal Optics and Photonics CPHY Assignment 2.

    E-Print Network [OSTI]

    Palffy-Muhoray, Peter

    Liquid Crystal Optics and Photonics CPHY 74495 Assignment 2. P. Pal¤y-Muhoray Jan. 24, 2014 Due: Feb 4, 2014 1. Read pages 25 - 37 of the text (Guenther, Modern Optics). 2. Read Ch 2., Review of Electricity and Magnetism (http://mpal¤y.lci.kent.edu/optics) 3. Red light with wavelength = 632:8nm

  19. Space Request /Assignment Process University of Nebraska -Lincoln

    E-Print Network [OSTI]

    Farritor, Shane

    Space Request /Assignment Process University of Nebraska - Lincoln Approved by Chancellor 08/15/2005 Department / Unit Completes IRP Web-based request form Department "triggers" a change to space through, different, and/or additional space Notices sent from IRP to initiating d t t d ffi Does Request Alter Space

  20. Cooperative Task Assignment of Unmanned Aerial Vehicles in Adversarial Environments

    E-Print Network [OSTI]

    How, Jonathan P.

    stochastic formulation of the UAV task assignment problem. This formulation ex- plicitly accounts to maximize the mission value as an expectation, this stochastic formulation designs coordinated plans are not constant and change with time due to the removal of SAM sites by other UAVs. This allocation recovers

  1. GEOL 104 Dinosaurs: A Natural History Geology Assignment

    E-Print Network [OSTI]

    Holtz Jr., Thomas R.

    rocks is the energy of the environment: that is, how fast the water (or wind) was moving. EssentiallyName: 1 GEOL 104 Dinosaurs: A Natural History Geology Assignment DUE: Mon. Sept. 18 Part I, the higher the energy, the larger the size of the particles of sediment. Slow moving water can only move

  2. Priority Assignment in Emergency Response Evin Uzun Jacobson1

    E-Print Network [OSTI]

    Ziya, Serhan

    Priority Assignment in Emergency Response Evin Uzun Jacobson1 , Nilay Tanik Argon2 , Serhan Ziya2 and operating rooms) can be overwhelmed by the sudden jump in patient demand. To ration these resources for the greatest number. This article investigates how this can be done and what the potential benefits would be

  3. Utilization and Fairness in Spectrum Assignment for Opportunistic Spectrum Access

    E-Print Network [OSTI]

    Zhao, Ben Y.

    . INTRODUCTION Wireless devices are becoming ubiquitous, placing increas­ ing stress on the fixed radio spectrum by software defined radio (SDR) technology [5], [15], [23], Open Spectrum allows unlicensed (secondary) users1 Utilization and Fairness in Spectrum Assignment for Opportunistic Spectrum Access Chunyi Peng

  4. Utilization and Fairness in Spectrum Assignment for Opportunistic Spectrum Access

    E-Print Network [OSTI]

    Almeroth, Kevin C.

    . INTRODUCTION Wireless devices are becoming ubiquitous, placing increas- ing stress on the fixed radio spectrum by software defined radio (SDR) technology [5], [16], [24], Open Spectrum allows unlicensed (secondary) users1 Utilization and Fairness in Spectrum Assignment for Opportunistic Spectrum Access Chunyi Peng

  5. RESEARCH Open Access ZAP: a distributed channel assignment algorithm

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    (CR) networks. CRs are capable of identifying underutilized licensed bands of the spectrum, allowing is overloaded, a large part of the frequency spectrum licensed to primary users is being underutilized or neverRESEARCH Open Access ZAP: a distributed channel assignment algorithm for cognitive radio networks

  6. Patent Agreement and Assignment The University of Virginia

    E-Print Network [OSTI]

    Acton, Scott

    Patent Agreement and Assignment The University of Virginia Under the University of Virginia Patent software, are excluded from this definition. The Patent Policy further states that: "Any person who may be engaged in University research shall be required to execute a patent agreement with the University

  7. Technology commercialization cost model and component case study. Final report

    SciTech Connect (OSTI)

    Not Available

    1991-12-01T23:59:59.000Z

    Fuel cells seem poised to emerge as a clean, efficient, and cost competitive source of fossil fuel based electric power and thermal energy. Sponsors of fuel cell technology development need to determine the validity and the attractiveness of a technology to the market in terms of meeting requirements and providing value which exceeds the total cost of ownership. Sponsors of fuel cell development have addressed this issue by requiring the developers to prepare projections of the future production cost of their fuel cells in commercial quantities. These projected costs, together with performance and life projections, provide a preliminary measure of the total value and cost of the product to the customer. Booz-Allen & Hamilton Inc. and Michael A. Cobb & Company have been retained in several assignments over the years to audit these cost projections. The audits have gone well beyond a simple review of the numbers. They have probed the underlying technical and financial assumptions, the sources of data on material and equipment costs, and explored issues such as the realistic manufacturing yields which can be expected in various processes. Based on the experience gained from these audits, the DOE gave Booz-Allen and Michael A. Cobb & company the task to develop a criteria to be used in the execution of future fuel cell manufacturing cost studies. It was thought that such a criteria would make it easier to execute such studies in the future as well as to cause such studies to be more understandable and comparable.

  8. Technology commercialization cost model and component case study

    SciTech Connect (OSTI)

    Not Available

    1991-12-01T23:59:59.000Z

    Fuel cells seem poised to emerge as a clean, efficient, and cost competitive source of fossil fuel based electric power and thermal energy. Sponsors of fuel cell technology development need to determine the validity and the attractiveness of a technology to the market in terms of meeting requirements and providing value which exceeds the total cost of ownership. Sponsors of fuel cell development have addressed this issue by requiring the developers to prepare projections of the future production cost of their fuel cells in commercial quantities. These projected costs, together with performance and life projections, provide a preliminary measure of the total value and cost of the product to the customer. Booz-Allen Hamilton Inc. and Michael A. Cobb Company have been retained in several assignments over the years to audit these cost projections. The audits have gone well beyond a simple review of the numbers. They have probed the underlying technical and financial assumptions, the sources of data on material and equipment costs, and explored issues such as the realistic manufacturing yields which can be expected in various processes. Based on the experience gained from these audits, the DOE gave Booz-Allen and Michael A. Cobb company the task to develop a criteria to be used in the execution of future fuel cell manufacturing cost studies. It was thought that such a criteria would make it easier to execute such studies in the future as well as to cause such studies to be more understandable and comparable.

  9. Some effects of differential amounts of response cost on human responding to unstructured stimuli

    E-Print Network [OSTI]

    Walton, James Vernon

    2012-06-07T23:59:59.000Z

    contain- ing two tables and two chairs, two Kodak Carousel Slide Projectors with slide trays, and a movie screen. Ss were seated at an empty desk-chair, facing, and approximately ten feet away from the movie screen. The E was seated at a table... as "correct" and all other responses as "incorrect" for all Ss. Ss were then randomly assigned to either High Cost, Medium Cost, Low Cost, or one of two control groups Treatment ~hase Each S was seated at an empty desk-chair facing the movie screen A Cost...

  10. Power Plant Cycling Costs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (say, a trip) and such factors are not fully captured in this dataset. 9. Older combined cycle units were a step change in lower operating costs due to cycling...

  11. Estimating Renewable Energy Costs

    Broader source: Energy.gov [DOE]

    Some renewable energy measures, such as daylighting, passive solar heating, and cooling load avoidance, do not add much to the cost of a building. However, renewable energy technologies typically...

  12. Cost Estimating Guide

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-05-09T23:59:59.000Z

    This Guide provides uniform guidance and best practices that describe the methods and procedures that could be used in all programs and projects at DOE for preparing cost estimates. No cancellations.

  13. Investments of uncertain cost

    E-Print Network [OSTI]

    Pindyck, Robert S.

    1992-01-01T23:59:59.000Z

    I study irreversible investment decisions when projects take time to complete, and are subject to two types of uncertainty over the cost of completion. The first is technical uncertainty, i.e., uncertainty over the amount ...

  14. Provably Good Solutions for Wavelength Assignment in Optical ...

    E-Print Network [OSTI]

    The cost-efficient design of transparent optical networks comprises three ... capacity, while Optical Cross-Connects (OXCs) in the nodes offer switching capacity.

  15. Standard costs for labor

    E-Print Network [OSTI]

    Khan, Mohammed Nurul Absar

    1960-01-01T23:59:59.000Z

    STANDARD COSTS FOR LABOR A Thesis By MD. NURUL ABSAR KHAN Submitted to the Graduate School of the Agricultural and Mechanical College of Texms in partial fulfillment of the requirements for the degree of MASTER OF BUSINESS ADMINISTRATION... January 1960 Ma/or Sub)acts Accounting STANOAHD COSTS FOR LABOR ND, NURUL ABSAR KHAN Approved as t style and content bys Chairman of Committee Head of Hepartment January 1960 The author acknowledges his indebtedness to Mr. T. M. Leland, Mr. T. D...

  16. Assignment 5 Verification of ANSI-C with PVS

    E-Print Network [OSTI]

    Clarke, Edmund M.

    15-820-a Assignment 5 Verification of ANSI-C with PVS Due Apr. 30, 2003 1 Find the Minimum 1. Write a function in ANSI­C that finds the minumum number in an array. The size of the array is passed as a parameter. 2. Translate your ANSI­C code into PVS language, as described in the class. You may assume

  17. Roadway Improvement Project Cost Allocation

    E-Print Network [OSTI]

    Minnesota, University of

    Roadway Improvement Project Cost Allocation CTS 21st Annual Transportation Research Conference costs #12;Potential Applications · Roadway Project Feasibility Studies ­ Identified potential roadway infrastructure improvement ­ Documentation of estimated project costs ­ Determine property assessments

  18. Sunk Costs and Competitive Bidding

    E-Print Network [OSTI]

    French, Kenneth R.; McCormick, Robert E.

    1982-01-01T23:59:59.000Z

    SUNK COSTS AND COMPETITIVE BIDDING Kenneth R. FrenchRevised: November 1982 SUNK COSTS AND COMPETITIVE BIDDINGl the winning bid be? I f sunk costs do not matter, I f the

  19. Mandatory Photovoltaic System Cost Analysis

    Broader source: Energy.gov [DOE]

    The Arizona Corporation Commission requires electric utilities to conduct a cost/benefit analysis to compare the cost of line extension with the cost of installing a stand-alone photovoltaic (PV)...

  20. Factors Impacting Decommissioning Costs - 13576

    SciTech Connect (OSTI)

    Kim, Karen; McGrath, Richard [Electric Power Research Institute, 3420 Hillview Ave., Palo Alto, California (United States)] [Electric Power Research Institute, 3420 Hillview Ave., Palo Alto, California (United States)

    2013-07-01T23:59:59.000Z

    The Electric Power Research Institute (EPRI) studied United States experience with decommissioning cost estimates and the factors that impact the actual cost of decommissioning projects. This study gathered available estimated and actual decommissioning costs from eight nuclear power plants in the United States to understand the major components of decommissioning costs. Major costs categories for decommissioning a nuclear power plant are removal costs, radioactive waste costs, staffing costs, and other costs. The technical factors that impact the costs were analyzed based on the plants' decommissioning experiences. Detailed cost breakdowns by major projects and other cost categories from actual power plant decommissioning experiences will be presented. Such information will be useful in planning future decommissioning and designing new plants. (authors)

  1. RAM analysis helps cut turbine-generator systems costs

    SciTech Connect (OSTI)

    Cockerill, A.W. (Delta Tech. Systems, Cobourg, Ontario (CA)); Lavoie, M. (Ontario Hydro, Tiverton, Ontario (CA))

    1990-07-01T23:59:59.000Z

    Maintenance is effective when it improves equipment availability and reduces costs. Reduced costs stem from increased availability, which is the primary objective of this study. As a result, overall operating costs decrease. RAM analysis requires a logical approach to the problem through the use of techniques such as FMEA, FTA and goal trees. To illustrate the steps of this method, the authors used a simplified T-G system. This method is to rank critical components in terms of the severity of failure. On the basis of ranking, it is possible to assign the preventive maintenance tasks in order of priority. Other options are available. Examples are revised procedures, more detailed outage plans using PC-based programs and better spare parts management.

  2. QGESS: Capital Cost Scaling Methodology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (costs and values of inputs, outputs, and processes, including capital and operating costs) and performance (mass conversion, energy efficiency, and, generally speaking,...

  3. Low Cost, Durable Seal

    SciTech Connect (OSTI)

    Roberts, George; Parsons, Jason; Friedman, Jake

    2010-12-17T23:59:59.000Z

    Seal durability is critical to achieving the 2010 DOE operational life goals for both stationary and transportation PEM fuel cell stacks. The seal material must be chemically and mechanically stable in an environment consisting of aggressive operating temperatures, humidified gases, and acidic membranes. The seal must also be producible at low cost. Currentlyused seal materials do not meet all these requirements. This project developed and demonstrated a high consistency hydrocarbon rubber seal material that was able to meet the DOE technical and cost targets. Significant emphasis was placed on characterization of the material and full scale molding demonstrations.

  4. Cost Type Examples Salary costs for staff working

    E-Print Network [OSTI]

    Rambaut, Andrew

    . Equipment access charges Service contracts, running costs, materials and consumables and staff time

  5. AC 2007-253: ENCOURAGING CREATIVITY IN INTRODUCTORY COMPUTER SCIENCE PROGRAMMING ASSIGNMENTS

    E-Print Network [OSTI]

    VanDeGrift, Tammy

    AC 2007-253: ENCOURAGING CREATIVITY IN INTRODUCTORY COMPUTER SCIENCE PROGRAMMING ASSIGNMENTS Tammy technology, multimedia, software engineering, and CS theory. © American Society for Engineering Education, 2007 #12;Encouraging Creativity in Introductory Computer Science Programming Assignments Abstract

  6. Heliostat cost reduction study.

    SciTech Connect (OSTI)

    Jones, Scott A.; Lumia, Ronald. (University of New Mexico, Albuquerque, NM); Davenport, Roger (Science Applications International Corporation, San Diego, CA); Thomas, Robert C. (Advanced Thermal Systems, Centennial, CO); Gorman, David (Advanced Thermal Systems, Larkspur, CO); Kolb, Gregory J.; Donnelly, Matthew W.

    2007-06-01T23:59:59.000Z

    Power towers are capable of producing solar-generated electricity and hydrogen on a large scale. Heliostats are the most important cost element of a solar power tower plant. Since they constitute {approx} 50% of the capital cost of the plant it is important to reduce heliostat cost as much as possible to improve the economic performance of power towers. In this study we evaluate current heliostat technology and estimate a price of $126/m{sup 2} given year-2006 materials and labor costs for a deployment of {approx}600 MW of power towers per year. This 2006 price yields electricity at $0.067/kWh and hydrogen at $3.20/kg. We propose research and development that should ultimately lead to a price as low as $90/m{sup 2}, which equates to $0.056/kWh and $2.75/kg H{sup 2}. Approximately 30 heliostat and manufacturing experts from the United States, Europe, and Australia contributed to the content of this report during two separate workshops conducted at the National Solar Thermal Test Facility.

  7. Hay Harvesting Costs $$$$$ in Texas.

    E-Print Network [OSTI]

    Long, James T.; Taylor, Wayne D.

    1972-01-01T23:59:59.000Z

    Hay is an important crop in Ta 1 Harvesting costs constitute the major5 pense of hay production in many M Mg and Wayne D . Taylor INTRODUCTION .................................................... 2 Fixed Costs or Ownership Costs... ............................................. 10 Totarl Cost .............................................................. 10 HAY HARVESTING ALTERNATIVES COMPARED ...................... 11 HOW TO MAKE WISE DECISIONS CONCERNING INVESTMENTS IN MACHINERY...

  8. COMPARATIVE COSTS OF CALIFORNIA CENTRAL STATION ELECTRICITY

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION COMPARATIVE COSTS OF CALIFORNIA CENTRAL STATION ELECTRICITY GENERATION .............................................................................13 Definition of Levelized Cost ........................................................................................................13 Levelized Cost Components

  9. COMPARATIVE COSTS OF CALIFORNIA CENTRAL STATION ELECTRICITY

    E-Print Network [OSTI]

    Laughlin, Robert B.

    CALIFORNIA ENERGY COMMISSION COMPARATIVE COSTS OF CALIFORNIA CENTRAL STATION ELECTRICITY GENERATION............................................................ 3 Definition of Levelized Cost.................................................................................... 3 Levelized Cost Categories

  10. Resolution On The Assignment of Materials From Which Faculty Derive Royalties April 27, 2005

    E-Print Network [OSTI]

    Swaddle, John

    Resolution On The Assignment of Materials From Which Faculty Derive Royalties April 27, 2005 assigning class materials from which a faculty member derives royalties. In light of these principles, faculty who choose to assign materials from which they incidentally derive royalties should: Consider

  11. CISC 327 -Fall 2014 ! Course Project Assignment #5 -Back End Unit Testing!

    E-Print Network [OSTI]

    Cordy, James R.

    CISC 327 - Fall 2014 ! ! Course Project Assignment #5 - Back End Unit Testing! !Due Wednesday Nov 19! !In this assignment, you will practice (partial) white box testing of the Back Office you programmed in assignment #4. ! !You are to create two separate sets of white box unit tests, one

  12. Cost Estimating, Analysis, and Standardization

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1984-11-02T23:59:59.000Z

    To establish policy and responsibilities for: (a) developing and reviewing project cost estimates; (b) preparing independent cost estimates and analysis; (c) standardizing cost estimating procedures; and (d) improving overall cost estimating and analytical techniques, cost data bases, cost and economic escalation models, and cost estimating systems. Cancels DOE O 5700.2B, dated 8-5-1983; DOE O 5700.8, dated 5-27-1981; and HQ 1130.1A, dated 12-30-1981. Canceled by DOE O 5700.2D, dated 6-12-1992

  13. Geothermal probabilistic cost study

    SciTech Connect (OSTI)

    Orren, L.H.; Ziman, G.M.; Jones, S.C.; Lee, T.K.; Noll, R.; Wilde, L.; Sadanand, V.

    1981-08-01T23:59:59.000Z

    A tool is presented to quantify the risks of geothermal projects, the Geothermal Probabilistic Cost Model (GPCM). The GPCM model is used to evaluate a geothermal reservoir for a binary-cycle electric plant at Heber, California. Three institutional aspects of the geothermal risk which can shift the risk among different agents are analyzed. The leasing of geothermal land, contracting between the producer and the user of the geothermal heat, and insurance against faulty performance are examined. (MHR)

  14. LIFE Cost of Electricity, Capital and Operating Costs

    SciTech Connect (OSTI)

    Anklam, T

    2011-04-14T23:59:59.000Z

    Successful commercialization of fusion energy requires economic viability as well as technical and scientific feasibility. To assess economic viability, we have conducted a pre-conceptual level evaluation of LIFE economics. Unit costs are estimated from a combination of bottom-up costs estimates, working with representative vendors, and scaled results from previous studies of fission and fusion plants. An integrated process model of a LIFE power plant was developed to integrate and optimize unit costs and calculate top level metrics such as cost of electricity and power plant capital cost. The scope of this activity was the entire power plant site. Separately, a development program to deliver the required specialized equipment has been assembled. Results show that LIFE power plant cost of electricity and plant capital cost compare favorably to estimates for new-build LWR's, coal and gas - particularly if indicative costs of carbon capture and sequestration are accounted for.

  15. INDEPENDENT COST REVIEW (ICR)

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG | Department ofHTS Cable ProjectsHistoryia/802871 IA Blog|INDEPENDENT COST

  16. User cost in oil production

    E-Print Network [OSTI]

    Adelman, Morris Albert

    1990-01-01T23:59:59.000Z

    The assumption of an initial fixed mineral stock is superfluous and wrong. User cost (resource rent) in mineral production is the present value of expected increases in development cost. It can be measured as the difference ...

  17. Wind Integration Cost and Cost-Causation: Preprint

    SciTech Connect (OSTI)

    Milligan, M.; Kirby, B.; Holttinen, H.; Kiviluoma, J.; Estanqueiro, A.; Martin-Martinez, S.; Gomez-Lazaro, E.; Peneda, I.; Smith, C.

    2013-10-01T23:59:59.000Z

    The question of wind integration cost has received much attention in the past several years. The methodological challenges to calculating integration costs are discussed in this paper. There are other sources of integration cost unrelated to wind energy. A performance-based approach would be technology neutral, and would provide price signals for all technology types. However, it is difficult to correctly formulate such an approach. Determining what is and is not an integration cost is challenging. Another problem is the allocation of system costs to one source. Because of significant nonlinearities, this can prove to be impossible to determine in an accurate and objective way.

  18. Check Estimates and Independent Costs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    Check estimates and independent cost estimates (ICEs) are tools that can be used to validate a cost estimate. Estimate validation entails an objective review of the estimate to ensure that estimate criteria and requirements have been met and well documented, defensible estimate has been developed. This chapter describes check estimates and their procedures and various types of independent cost estimates.

  19. Cost Effectiveness NW Energy Coalition

    E-Print Network [OSTI]

    1 Action 8 Cost Effectiveness Manual Kim Drury NW Energy Coalition Context · Inconsistent understanding of cost effectiveness contributed to under performing conservation E.g: individual measures vs Action Plan for Energy Efficiency published a comprehensive guide on cost effectiveness: best practices

  20. COST SHARING Cost sharing is the portion of total project costs of a sponsored agreement that is not bourn by

    E-Print Network [OSTI]

    Cui, Yan

    1 COST SHARING Cost sharing is the portion of total project costs of a sponsored agreement. There are primarily three types of cost sharing that may occur on sponsored projects: Mandatory cost sharing. For example, the National Science Foundation requires mandatory cost sharing for some of its projects. COST

  1. Realistic costs of carbon capture

    SciTech Connect (OSTI)

    Al Juaied, Mohammed (Harvard Univ., Cambridge, MA (US). Belfer Center for Science and International Affiaris); Whitmore, Adam (Hydrogen Energy International Ltd., Weybridge (GB))

    2009-07-01T23:59:59.000Z

    There is a growing interest in carbon capture and storage (CCS) as a means of reducing carbon dioxide (CO2) emissions. However there are substantial uncertainties about the costs of CCS. Costs for pre-combustion capture with compression (i.e. excluding costs of transport and storage and any revenue from EOR associated with storage) are examined in this discussion paper for First-of-a-Kind (FOAK) plant and for more mature technologies, or Nth-of-a-Kind plant (NOAK). For FOAK plant using solid fuels the levelised cost of electricity on a 2008 basis is approximately 10 cents/kWh higher with capture than for conventional plants (with a range of 8-12 cents/kWh). Costs of abatement are found typically to be approximately US$150/tCO2 avoided (with a range of US$120-180/tCO2 avoided). For NOAK plants the additional cost of electricity with capture is approximately 2-5 cents/kWh, with costs of the range of US$35-70/tCO2 avoided. Costs of abatement with carbon capture for other fuels and technologies are also estimated for NOAK plants. The costs of abatement are calculated with reference to conventional SCPC plant for both emissions and costs of electricity. Estimates for both FOAK and NOAK are mainly based on cost data from 2008, which was at the end of a period of sustained escalation in the costs of power generation plant and other large capital projects. There are now indications of costs falling from these levels. This may reduce the costs of abatement and costs presented here may be 'peak of the market' estimates. If general cost levels return, for example, to those prevailing in 2005 to 2006 (by which time significant cost escalation had already occurred from previous levels), then costs of capture and compression for FOAK plants are expected to be US$110/tCO2 avoided (with a range of US$90-135/tCO2 avoided). For NOAK plants costs are expected to be US$25-50/tCO2. Based on these considerations a likely representative range of costs of abatement from CCS excluding transport and storage costs appears to be US$100-150/tCO2 for first-of-a-kind plants and perhaps US$30-50/tCO2 for nth-of-a-kind plants.The estimates for FOAK and NOAK costs appear to be broadly consistent in the light of estimates of the potential for cost reductions with increased experience. Cost reductions are expected from increasing scale, learning on individual components, and technological innovation including improved plant integration. Innovation and integration can both lower costs and increase net output with a given cost base. These factors are expected to reduce abatement costs by approximately 65% by 2030. The range of estimated costs for NOAK plants is within the range of plausible future carbon prices, implying that mature technology would be competitive with conventional fossil fuel plants at prevailing carbon prices.

  2. E-Print Network 3.0 - airport gate assignment Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Storage, Conversion and Utilization 9 When the Model Hits the Runway: The DOZE Algorithm for optimal dispatching of Summary: the problem of assigning es- corts to accompany...

  3. Math 138 Assignment #20 Make two pie charts using Excel. Pie ...

    E-Print Network [OSTI]

    rroames

    2007-10-11T23:59:59.000Z

    Math 138. Assignment #20. Make two pie charts using Excel. Pie Chart I: Using a week day as an example, indicate the number of hours you spend doing.

  4. E-Print Network 3.0 - association assigning individual Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IN INTRODUCTORY COMPUTER SCIENCE PROGRAMMING ASSIGNMENTS Tammy... , 2007 12;Encouraging Creativity in Introductory Computer Science Programming ... Source: VanDeGrift, Tammy -...

  5. E-Print Network 3.0 - assigning reciprocal vision Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Topic List Advanced Search Sample search results for: assigning reciprocal vision Page: << < 1 2 3 4 5 > >> 1 What motivates repayment? Neural correlates of reciprocity in...

  6. Advanced Fuel Cycle Cost Basis

    SciTech Connect (OSTI)

    D. E. Shropshire; K. A. Williams; W. B. Boore; J. D. Smith; B. W. Dixon; M. Dunzik-Gougar; R. D. Adams; D. Gombert; E. Schneider

    2008-03-01T23:59:59.000Z

    This report, commissioned by the U.S. Department of Energy (DOE), provides a comprehensive set of cost data supporting a cost analysis for the relative economic comparison of options for use in the Advanced Fuel Cycle Initiative (AFCI) Program. The report describes the AFCI cost basis development process, reference information on AFCI cost modules, a procedure for estimating fuel cycle costs, economic evaluation guidelines, and a discussion on the integration of cost data into economic computer models. This report contains reference cost data for 25 cost modulesó23 fuel cycle cost modules and 2 reactor modules. The cost modules were developed in the areas of natural uranium mining and milling, conversion, enrichment, depleted uranium disposition, fuel fabrication, interim spent fuel storage, reprocessing, waste conditioning, spent nuclear fuel (SNF) packaging, long-term monitored retrievable storage, near surface disposal of low-level waste (LLW), geologic repository and other disposal concepts, and transportation processes for nuclear fuel, LLW, SNF, transuranic, and high-level waste.

  7. Advanced Fuel Cycle Cost Basis

    SciTech Connect (OSTI)

    D. E. Shropshire; K. A. Williams; W. B. Boore; J. D. Smith; B. W. Dixon; M. Dunzik-Gougar; R. D. Adams; D. Gombert

    2007-04-01T23:59:59.000Z

    This report, commissioned by the U.S. Department of Energy (DOE), provides a comprehensive set of cost data supporting a cost analysis for the relative economic comparison of options for use in the Advanced Fuel Cycle Initiative (AFCI) Program. The report describes the AFCI cost basis development process, reference information on AFCI cost modules, a procedure for estimating fuel cycle costs, economic evaluation guidelines, and a discussion on the integration of cost data into economic computer models. This report contains reference cost data for 26 cost modulesó24 fuel cycle cost modules and 2 reactor modules. The cost modules were developed in the areas of natural uranium mining and milling, conversion, enrichment, depleted uranium disposition, fuel fabrication, interim spent fuel storage, reprocessing, waste conditioning, spent nuclear fuel (SNF) packaging, long-term monitored retrievable storage, near surface disposal of low-level waste (LLW), geologic repository and other disposal concepts, and transportation processes for nuclear fuel, LLW, SNF, and high-level waste.

  8. Cost Model and Cost Estimating Software - DOE Directives, Delegations...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is basically a cost model, which forms the basis for estimating software. g4301-1chp22.pdf -- PDF Document, 190 KB Writer: John Makepeace Subjects: Administration...

  9. An Examination of Avoided Costs in Utah

    E-Print Network [OSTI]

    Bolinger, Mark; Wiser, Ryan

    2005-01-01T23:59:59.000Z

    Subject An Examination of Avoided Costs in Utah Date Januarystate by seeking changes to the avoided cost tariff paid tomethod of calculating avoided costs that has been officially

  10. Hydrogen refueling station costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

    2007-01-01T23:59:59.000Z

    Fueling stations; Cost; Shanghai; Fuel cell vehicles 1.and the delivery cost for fuel cell vehicles, however, itthus hydrogen cost therefore depend on the ?eet of fuel cell

  11. Lower Cost Carbon Fiber Precursors

    Broader source: Energy.gov (indexed) [DOE]

    production and conversion parameters must be optimized. Lower cost fiber enable CF composite applications. Approach: 1. Complete previous effort by scaling to the CF production...

  12. Lower Cost Carbon Fiber Precursors

    Broader source: Energy.gov (indexed) [DOE]

    performing fiber. (600-750 KSI) Barriers: Addresses the need for higher performance low cost fiber for hydrogen storage tanks and energy management structures of automobiles....

  13. HTGR Cost Model Users' Manual

    SciTech Connect (OSTI)

    A.M. Gandrik

    2012-01-01T23:59:59.000Z

    The High Temperature Gas-Cooler Reactor (HTGR) Cost Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Cost Model calculates an estimate of the capital costs, annual operating and maintenance costs, and decommissioning costs for a high-temperature gas-cooled reactor. The user can generate these costs for multiple reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for a single or four-pack configuration; and for a reactor size of 350 or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Cost Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Cost Model. This model was design for users who are familiar with the HTGR design and Excel. Modification of the HTGR Cost Model should only be performed by users familiar with Excel and Visual Basic.

  14. Audit Costs for the 1986 Texas Energy Cost Containment Program

    E-Print Network [OSTI]

    Heffington, W. M.; Lum, S. K.; Bauer, V. A.; Turner, W. D.

    1987-01-01T23:59:59.000Z

    Direct program costs for detailed audits of 13.5 million square feet of institutional building space in the 1986 Texas Energy Cost Containment Program were $0.047/SF. The building area was 63 percent simple (offices, schools, and universities...

  15. Postponing commitment to preserve opportunities when dynamically assigning new goals to UAVs

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Postponing commitment to preserve opportunities when dynamically assigning new goals to UAVs Pierre Vehicles (UAVs). Decisions to assign new goals are not instantaneous and they tend to become obsolete because UAVs move continuously. We use the date of commitment to handle this. This paper introduces how we

  16. SHORT COMMUNICATION Assignment of the Norepinephrine Transporter Protein (NET1) Locus

    E-Print Network [OSTI]

    Kidd, Kenneth

    SHORT COMMUNICATION Assignment of the Norepinephrine Transporter Protein (NET1) Locus to Chromosome; revisedJuly 19, 1993 The norepinephrine transporter protein (NET) is the presynaptic reuptake site assignment to chromo- some 16. We then typed a genetic polymorphism at the NET1 locus in three large

  17. Assignment 6: Heat Transfer Page 1 of 8 600.112: Introduction to Programming

    E-Print Network [OSTI]

    Fröhlich, Peter

    Assignment 6: Heat Transfer Page 1 of 8 600.112: Introduction to Programming for Scientists and Engineers Assignment 6: Heat Transfer Peter H. Fr¨ohlich phf@cs.jhu.edu Joanne Selinski joanne to Programming for Scientists and Engineers is all about heat transfer and how to simulate it. There are three

  18. Usage of Assignable Space 78 Number of Buildings and Square Metres 79

    E-Print Network [OSTI]

    Sun, Yu

    of University of Toronto Students in Residence 81 77 #12;USAGE OF ASSIGNABLE SPACE 2008-09 ST. GEORGE 2009 NUMBER OF NET ASSIGNABLE NET SQUARE GROSS BUILDINGS SQUARE METRES METRES SQUARE METRES University St. George 120 617,032 1,004,611 1,170,350 Leased St. George 5 3,052 3,786 4,255 Scarborough 33 63

  19. A Polynomial-Time Nuclear Vector Replacement Algorithm for Automated NMR Resonance Assignments

    E-Print Network [OSTI]

    Lilien, Ryan

    A Polynomial-Time Nuclear Vector Replacement Algorithm for Automated NMR Resonance Assignments and refinement. A new algorithm, called Nuclear Vector Replacement (NVR) is introduced to compute assignments be acquired in a fraction of the time needed to record the traditional suite of ex- periments used to perform

  20. Frank Masci Page 1 06/17/2003 Initial Pipeline Assignment Procedure

    E-Print Network [OSTI]

    Masci, Frank

    Frank Masci Page 1 06/17/2003 Initial Pipeline Assignment Procedure (The SIRTF "Pipeline Picker") F and request (AOR, IER or SER) is assigned a pipeline thread to initiate processing. It was developed by J, the "pipeline picker" routine is triggered to uniquely determine an appropriate pipeline script-ID (pl

  1. Air Pollution Physics and Chemistry EAS 6790 Home Work Assignment Ozone Chemistry 2

    E-Print Network [OSTI]

    Weber, Rodney

    1 Air Pollution Physics and Chemistry EAS 6790 Fall 2010 Home Work Assignment Ozone Chemistry 2 and Chemistry EAS 6790 Fall 2006 Home Work Assignment No. 4, Ozone Chemistry Problems 11.8 and 11.9 (sub-part 1 and 2 only). Daniel Jacob, Atmospheric Chemistry #12;2 Problem 2: 2 2. Consider an air parcel ventilated

  2. Energy-aware Job Assignment in Server Farms with Setup Delays under LCFS and PS

    E-Print Network [OSTI]

    Hyytiä, Esa

    Energy-aware Job Assignment in Server Farms with Setup Delays under LCFS and PS Esa Hyytiä of Communications and Networking Aalto University, Finland Abstract--We consider the job (or task) assignment problem to heterogeneous parallel servers, where servers can be switched off to save energy. However

  3. NMR-assignments of a cytosolic domain of the C-terminus of polycystin-2

    E-Print Network [OSTI]

    Witzgall, Ralph - Naturwissenschaftliche Fakultät III

    ARTICLE NMR-assignments of a cytosolic domain of the C-terminus of polycystin-2 Frank H. Schumann √?. The backbone and side chain resonances were assigned by multidimensional NMR methods, the obtained chemical contained 1 g NH4Cl, 6 g glucose, F. H. Schumann √Ā M. Schmidt √Ā R. Bader √Ā H. R. Kalbitzer (&) Institute

  4. Hydrogen Compression, Storage, and Dispensing Cost Reduction...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Compression, Storage, and Dispensing Cost Reduction Workshop Addendum Hydrogen Compression, Storage, and Dispensing Cost Reduction Workshop Addendum Document states additional...

  5. 5, 14791509, 2008 Staged cost

    E-Print Network [OSTI]

    Boyer, Edmond

    HESSD 5, 1479­1509, 2008 Staged cost optimization of urban storm drainage systems M. Maharjan et al Staged cost optimization of urban storm drainage systems based on hydraulic performance in a changing optimization of urban storm drainage systems M. Maharjan et al. Title Page Abstract Introduction Conclusions

  6. Reactor Cost Analysis Brian James

    E-Print Network [OSTI]

    Reactor Cost Analysis Brian James Directed Technologies, Inc. 6-7 November 2007 This presentation specification & optimization · Capital cost estimation · Projected hydrogen $/kg #12;Directed Technologies, Inc/WGS Membrane Reactor OTM/ Water-Splitting ANL With WGS #12;Directed Technologies, Inc. 6-7 November 2007 BILIWG

  7. Use of Cost Estimating Relationships

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    Cost Estimating Relationships (CERs) are an important tool in an estimator's kit, and in many cases, they are the only tool. Thus, it is important to understand their limitations and characteristics. This chapter discusses considerations of which the estimator must be aware so the Cost Estimating Relationships can be properly used.

  8. Annual Assignment Instructions for FAIR 3.0 To reach the Annual Assignment page, click the Annual Assignment link in the Modules section (see green box) or by selecting the Annual

    E-Print Network [OSTI]

    Fernandez, Eduardo

    ) #12;You can search for the faculty member(s) for whom annual assignments are to be entered several ways. By default, the option to Search Records By Campus/College/Department is selected. If you wish narrow the results by specifying the college and/or department and by restricting the search to active

  9. Survey of Ilex crenata along the Callaway Gardens Holly Trail: summer 1990

    E-Print Network [OSTI]

    Labega, Adrienne L

    1993-01-01T23:59:59.000Z

    of this research was to survey and evaluate the Japa- nese Holly (I1ex crenara) section of the Holly Trail to provide the trail staff with the following information; an inventory of the plants remaining along the trail and their physical condition, a list... it is actually a native from Europe to China (Everett, 1981). There is no "typical" English holly. This evergreen is highly vari- able. These hollies can be plants with a pyramidal to oblong head, which may ex- ceed a height of 40 feet. The leaves differ...

  10. Incentive Rates- At What Cost?

    E-Print Network [OSTI]

    Schaeffer, S. C.

    with interruptible services. Instead, I filed "ISB" which was priced slightly above the marginal fuel cost on a time of use basis. Many of the periods of the year the first year that I proposed that rate, the cost of interruptible would have been higher than... forms centers on four issues; cost scope of the topic, so let me describe what I feel based pricing, discrimination, competition between is an incentive rate. My view is likely to strike utilities, and effectiveness. You've already some of you...

  11. Sandia National Laboratories: Water Availability, Cost, and Use

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    InterconnectsWater Availability, Cost, and Use Water Availability, Cost, and Use Water Availability, Cost, and Use Water Availability, Cost, and Use Availability, cost, and...

  12. A study of design oriented cost estimation

    E-Print Network [OSTI]

    Raman, Ramchand P.

    1992-01-01T23:59:59.000Z

    except for the cost of material, and does not distinguish direct and indirect costs involved in the production. Vernon (1968) describes costs as standard or actual. Standard cost is a predicted cost reflecting what a part or product should cost, while... parts only. Some researchers have used the component cost in making decisions regarding the manufacturing process. Egbelu and others (Egbelu et al. , 1982) describe a model for making decisions about cast parts. They define a relationship associating...

  13. Mandatory Photovoltaic System Cost Estimate

    Broader source: Energy.gov [DOE]

    At the request of a customer or a potential customer, Colorado electric utilities are required to conduct a cost comparison of a photovoltaic (PV) system to any proposed distribution line extension...

  14. Lower Cost Carbon Fiber Precursors

    Broader source: Energy.gov (indexed) [DOE]

    1 Lower Cost Carbon Fiber Precursors P.I. Name: Dave Warren Presenter: Dr. Amit K. Naskar Oak Ridge National Laboratory 05162012 Project ID LM004 This presentation does not...

  15. Letting The Sun Shine On Solar Costs: An Empirical Investigation Of Photovoltaic Cost Trends In California

    E-Print Network [OSTI]

    Wiser, Ryan; Bolinger, Mark; Cappers, Peter; Margolis, Robert

    2006-01-01T23:59:59.000Z

    INVESTIGATION OF PHOTOVOLTAIC COST TRENDS IN CALIFORNIA RyanInvestigation of Photovoltaic Cost Trends in CaliforniaĒ,cost of customer-sited, grid-connected solar photovoltaic (

  16. A linear programming solution to the gate assignment problem at airport terminals

    E-Print Network [OSTI]

    Mangoubi, Rami

    1980-01-01T23:59:59.000Z

    This research solves the flight-to-gate assignment problem at airports in such a way as to minimize, or at least reduce, walking distances for passengers inside terminals. Two solution methods are suggested. The first is ...

  17. Critical enhancements of a dynamic traffic assignment model for highly congested, complex urban network

    E-Print Network [OSTI]

    Wei, Zheng, S.M. Massachusetts Institute of Technology

    2010-01-01T23:59:59.000Z

    To accurately replicate the highly congested traffic situation of a complex urban network, significant challenges are posed to current simulation-based dynamic traffic assignment (DTA) models. This thesis discusses these ...

  18. Spatiotemporal Assignment of Energy Harvesters on a Self-Sustaining Medical Shoe

    E-Print Network [OSTI]

    Potkonjak, Miodrag

    Spatiotemporal Assignment of Energy Harvesters on a Self-Sustaining Medical Shoe James B. Wendt does it address integration into existing sensing systems. We solve these issues and present a self-sustaining

  19. Analysis of Individual Transit Trips in EMME/2: Calibration of 1996 TTC Trips Disaggregate Assignment

    E-Print Network [OSTI]

    Toronto, University of

    Assignment By Bernard Farrol Toronto Transit Commission And Vladimir Livshits Data Management Group Joint reductions in TTC operating budgets and subsidies. This is the first major project undertaken by TTC Planning

  20. 31.01.01.V1.05 SALARY ADJUSTMENTS FOR INTERNATIONAL ASSIGNMENTS

    E-Print Network [OSTI]

    administered by the employee, or other measure of increased responsibility resulting from the assignment. 1 associated with a change in position. 2.00 GUIDELINES AND PROCEDURES 2.01 All salary adjustments

  1. COMPARATIVE COSTS OF CALIFORNIA CENTRAL STATION ELECTRICITY

    E-Print Network [OSTI]

    and simple cycle costs are the result of a comprehensive survey of actual costs from the power plant developers in California who built power plants between 2001 and 2006. The other costs are based on actual in conjunction with the variable cost information of a production cost market simulation model to produce

  2. Conservation Cost-Effectiveness Determination Methodology

    E-Print Network [OSTI]

    the levelized cost of the aggregate supply curves, the portfolio model does not evaluate each measure's specific of programming constraints, the levelized costs of conservation used in the portfolio model are not adjusted of its costs. May 2005 E-1 #12;include energy and capacity cost savings, local distribution cost savings

  3. Assignment Carbon Footprints Name__Lachniet__ 1) See Figure 1.1a at the back of the assignment (from IPCC)

    E-Print Network [OSTI]

    Lachniet, Matthew S.

    Assignment Carbon Footprints Name__Lachniet__ 1) See Figure 1.1a at the back capita, relative to other countries. 3) Use the carbon footprint calculator at 1) http utility bill. Use the # of people living in your house. a) What is your carbon footprint, in metric

  4. A survey on physical layer impairments aware routing and wavelength assignment algorithms in optical networks

    E-Print Network [OSTI]

    undergone tremendous changes and the trend clearly shows an evolution path towards lower cost (CAPEX

  5. NUCLEAR ENERGY SYSTEM COST MODELING

    SciTech Connect (OSTI)

    Francesco Ganda; Brent Dixon

    2012-09-01T23:59:59.000Z

    The U.S. Department of Energyís Fuel Cycle Technologies (FCT) Program is preparing to perform an evaluation of the full range of possible Nuclear Energy Systems (NES) in 2013. These include all practical combinations of fuels and transmuters (reactors and sub-critical systems) in single and multi-tier combinations of burners and breeders with no, partial, and full recycle. As part of this evaluation, Levelized Cost of Electricity at Equilibrium (LCAE) ranges for each representative system will be calculated. To facilitate the cost analyses, the 2009 Advanced Fuel Cycle Cost Basis Report is being amended to provide up-to-date cost data for each step in the fuel cycle, and a new analysis tool, NE-COST, has been developed. This paper explains the innovative ďIslandĒ approach used by NE-COST to streamline and simplify the economic analysis effort and provides examples of LCAE costs generated. The Island approach treats each transmuter (or target burner) and the associated fuel cycle facilities as a separate analysis module, allowing reuse of modules that appear frequently in the NES options list. For example, a number of options to be screened will include a once-through uranium oxide (UOX) fueled light water reactor (LWR). The UOX LWR may be standalone, or may be the first stage in a multi-stage system. Using the Island approach, the UOX LWR only needs to be modeled once and the module can then be reused on subsequent fuel cycles. NE-COST models the unit operations and life cycle costs associated with each step of the fuel cycle on each island. This includes three front-end options for supplying feedstock to fuel fabrication (mining/enrichment, reprocessing of used fuel from another island, and/or reprocessing of this islandís used fuel), along with the transmuter and back-end storage/disposal. Results of each island are combined based on the fractional energy generated by each islands in an equilibrium system. The cost analyses use the probability distributions of key parameters and employs Monte Carlo sampling to arrive at an islandís cost probability density function (PDF). When comparing two NES to determine delta cost, strongly correlated parameters can be cancelled out so that only the differences in the systems contribute to the relative cost PDFs. For example, one comparative analysis presented in the paper is a single stage LWR-UOX system versus a two-stage LWR-UOX to LWR-MOX system. In this case, the first stage of both systems is the same (but with different fractional energy generation), while the second stage of the UOX to MOX system uses the same type transmuter but the fuel type and feedstock sources are different. In this case, the cost difference between systems is driven by only the fuel cycle differences of the MOX stage.

  6. RaisingRivals'FixedCosts Matthew Olczak

    E-Print Network [OSTI]

    Feigon, Brooke

    . In addition much of the recent Industrial Organisation literature has focused on the importance of sunk costs, whereas this paper considers fixed costs that do not have to be sunk costs. A set of guidelines produced

  7. USA oilgas production cost : recent changes

    E-Print Network [OSTI]

    Adelman, Morris Albert

    1991-01-01T23:59:59.000Z

    During 1984-1989, oil development investment cost in the USA fell, but only because of lower activity. The whole cost curve shifted unfavorably (leftward). In contrast, natural gas cost substantially decreased, the curve ...

  8. Hydrogen Refueling Station Costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, J; Jianxin, Ma

    2006-01-01T23:59:59.000Z

    and the delivery cost for fuel cell vehicles, however, itfueling stations, cost, Shanghai, fuel cell vehicles 1.0hydrogen cost therefore depend on the fleet of fuel cell

  9. Designing for cost In an aerospace company

    E-Print Network [OSTI]

    Hammar, Elizabeth (Elizabeth Deming)

    2014-01-01T23:59:59.000Z

    Companies take different approaches, and achieve different degrees of implementation, in designing products for cost. This thesis discusses Target Costing and its application at The Boeing Company. Target Costing is a ...

  10. Plant Energy Cost Optimization Program (PECOP)

    E-Print Network [OSTI]

    Robinson, A. M.

    1980-01-01T23:59:59.000Z

    The Plant Energy Cost Optimization Program (PECOP) is a Management System designed to reduce operating cost in a continuous operating multi product plant by reviewing all cost factors and selecting plant wide production schedules which are most...

  11. Hydrogen Refueling Station Costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

    2006-01-01T23:59:59.000Z

    to hydrogen storage vessels and compressors. Feedstock CostHydrogen Production Equipment Purifier Storage System Compressor Dispenser Additional Equipment Installation Costshydrogen equipment costs. Meyers [2] provides an in depth analyses of reformer, compressor, and storage equipment costs.

  12. †Underfloor air distribution (UFAD) cost study: analysis of first cost tradeoffs in UFAD systems

    E-Print Network [OSTI]

    Webster, Tom; Benedek, Corinne; Bauman, Fred

    2006-01-01T23:59:59.000Z

    Thermal Quality: Total HVAC Cost Trend Table 5. Wall Thermal20. Climate: Total HVAC Cost Trend HVAC Category Cost ($/the total perimeter HVAC cost trend for increased density of

  13. Cost Analysis of Hydrogen Storage Systems

    Broader source: Energy.gov (indexed) [DOE]

    Results - Do Not Cite Hydrogen Storage Sodium Alanate Bottom-up BOP Cost DFMA software is used to estimate balance of plant (BOP) component costs based on material,...

  14. Hydrogen refueling station costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

    2007-01-01T23:59:59.000Z

    pieces of hardware: 1. Hydrogen production equipment (e.g.when evaluating hydrogen production costs. Many analyses inrespect to size and hydrogen production method. These costs

  15. Driltac (Drilling Time and Cost Evaluation)

    SciTech Connect (OSTI)

    None

    1986-08-01T23:59:59.000Z

    The users manual for the drill tech model for estimating the costs of geothermal wells. The report indicates lots of technical and cost detail. [DJE-2005

  16. Estimating Specialty Costs - DOE Directives, Delegations, and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    project specialty costs and methods of estimating costs for specialty projects. g4301-1chp20.pdf -- PDF Document, 56 KB Writer: John Makepeace Subjects: Administration Management...

  17. Example Cost Codes for Construction Projects

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    This chapter provides an example outline of cost items and their corresponding cost codes that may be used for construction projects.

  18. Hydrogen Production Cost Estimate Using Biomass Gasification...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Production Cost Estimate Using Biomass Gasification: Independent Review Hydrogen Production Cost Estimate Using Biomass Gasification: Independent Review This independent review is...

  19. Low Cost Carbon Fiber Production Carbon Fiber Manufacturing Cost Modeling

    E-Print Network [OSTI]

    to bond with composite matrix material. It is important that a carbon fiber manufacturing cost model manufactured with carbon fiber as opposed to traditional materials such as steel, automotive parts are able associated with both the manufacture of carbon fibers themselves as well as their composites. Traditional

  20. Cost-Causation and Integration Cost Analysis for Variable Generation

    SciTech Connect (OSTI)

    Milligan, M.; Ela, E.; Hodge, B. M.; Kirby, B.; Lew, D.; Clark, C.; DeCesaro, J.; Lynn, K.

    2011-06-01T23:59:59.000Z

    This report examines how wind and solar integration studies have evolved, what analysis techniques work, what common mistakes are still made, what improvements are likely to be made in the near future, and why calculating integration costs is such a difficult problem and should be undertaken carefully, if at all.

  1. Market Equilibrium with Transaction Costs

    E-Print Network [OSTI]

    Chakraborty, Sourav; Karande, Chinmay

    2010-01-01T23:59:59.000Z

    Identical products being sold at different prices in different locations is a common phenomenon. Price differences might occur due to various reasons such as shipping costs, trade restrictions and price discrimination. We give a way to model such scenarios by supplementing the classical Fisher model of a market by introducing {\\em transaction costs}. For every buyer $i$ and every good $j$, there is a transaction cost of $\\cij$; if the price of good $j$ is $p_j$, then the cost to the buyer $i$ {\\em per unit} of $j$ is $p_j + \\cij$. This allows the same good to be sold at different (effective) prices to different buyers. We study questions regarding existence, uniqueness and computability of equilibrium in such a model. Our results can be summarized as such: The convex program of \\cite{Dev09} can be generalized to prove existence and uniqueness of equilibrium. We also provide a combinatorial algorithm that computes $\\epsilon$-approximate equilibrium prices and allocations in $O(\\frac{1}{\\epsilon}(n+\\log{m})mn\\l...

  2. Wind Electrolysis: Hydrogen Cost Optimization

    SciTech Connect (OSTI)

    Saur, G.; Ramsden, T.

    2011-05-01T23:59:59.000Z

    This report describes a hydrogen production cost analysis of a collection of optimized central wind based water electrolysis production facilities. The basic modeled wind electrolysis facility includes a number of low temperature electrolyzers and a co-located wind farm encompassing a number of 3MW wind turbines that provide electricity for the electrolyzer units.

  3. Examples of Cost Estimation Packages

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    Estimates can be performed in a variety of ways. Some of these are for projects for an undefined scope, a conventional construction project, or where there is a level of effort required to complete the work. Examples of cost estimation packages for these types of projects are described in this appendix.

  4. Pollution prevention cost savings potential

    SciTech Connect (OSTI)

    Celeste, J.

    1994-12-01T23:59:59.000Z

    The waste generated by DOE facilities is a serious problem that significantly impacts current operations, increases future waste management costs, and creates future environmental liabilities. Pollution Prevention (P2) emphasizes source reduction through improved manufacturing and process control technologies. This concept must be incorporated into DOE`s overall operating philosophy and should be an integral part of Total Quality Management (TQM) program. P2 reduces the amount of waste generated, the cost of environmental compliance and future liabilities, waste treatment, and transportation and disposal costs. To be effective, P2 must contribute to the bottom fine in reducing the cost of work performed. P2 activities at LLNL include: researching and developing innovative manufacturing; evaluating new technologies, products, and chemistries; using alternative cleaning and sensor technologies; performing Pollution Prevention Opportunity Assessments (PPOAs); and developing outreach programs with small business. Examples of industrial outreach are: innovative electroplating operations, printed circuit board manufacturing, and painting operations. LLNL can provide the infrastructure and technical expertise to address a wide variety of industrial concerns.

  5. Method and system for assigning a confidence metric for automated determination of optic disc location

    DOE Patents [OSTI]

    Karnowski, Thomas P. (Knoxville, TN); Tobin, Jr., Kenneth W. (Harriman, TN); Muthusamy Govindasamy, Vijaya Priya (Knoxville, TN); Chaum, Edward (Memphis, TN)

    2012-07-10T23:59:59.000Z

    A method for assigning a confidence metric for automated determination of optic disc location that includes analyzing a retinal image and determining at least two sets of coordinates locating an optic disc in the retinal image. The sets of coordinates can be determined using first and second image analysis techniques that are different from one another. An accuracy parameter can be calculated and compared to a primary risk cut-off value. A high confidence level can be assigned to the retinal image if the accuracy parameter is less than the primary risk cut-off value and a low confidence level can be assigned to the retinal image if the accuracy parameter is greater than the primary risk cut-off value. The primary risk cut-off value being selected to represent an acceptable risk of misdiagnosis of a disease having retinal manifestations by the automated technique.

  6. The Contribution of Environmental Siting and Permitting Requirements to the Cost of Energy for Wave Energy Devices

    SciTech Connect (OSTI)

    Copping, Andrea E.; Geerlofs, Simon H.; Hanna, Luke A.

    2014-06-30T23:59:59.000Z

    Responsible deployment of marine and hydrokinetic (MHK) devices in estuaries, coastal areas, and major rivers requires that biological resources and ecosystems be protected through siting and permitting (consenting) processes. Scoping appropriate deployment locations, collecting pre-installation (baseline) and post-installation data all add to the cost of developing MHK projects, and hence to the cost of energy. Under the direction of the U.S. Department of Energy, Pacific Northwest National Laboratory scientists have developed logic models that describe studies and processes for environmental siting and permitting. Each study and environmental permitting process has been assigned a cost derived from existing and proposed tidal, wave, and riverine MHK projects. Costs have been developed at the pilot scale and for commercial arrays for a surge wave energy converter

  7. The Contribution of Environmental Siting and Permitting Requirements to the Cost of Energy for Oscillating Water Column Wave Energy Devices

    SciTech Connect (OSTI)

    Copping, Andrea E.; Geerlofs, Simon H.; Hanna, Luke A.

    2013-09-30T23:59:59.000Z

    Responsible deployment of marine and hydrokinetic (MHK) devices in estuaries, coastal areas, and major rivers requires that biological resources and ecosystems be protected through siting and permitting (consenting) processes. Scoping appropriate deployment locations, collecting pre-installation (baseline) and post-installation data all add to the cost of developing MHK projects, and hence to the cost of energy. Under the direction of the U.S. Department of Energy, Pacific Northwest National Laboratory scientists have developed logic models that describe studies and processes for environmental siting and permitting. Each study and environmental permitting process has been assigned a cost derived from existing and proposed tidal, wave, and riverine MHK projects, as well as expert opinion of marine environmental research professionals. Cost estimates have been developed at the pilot and commercial scale. The reference model described in this document is an oscillating water column device deployed in Northern California at approximately 50 meters water depth.

  8. Supplemental report on cost estimates'

    SciTech Connect (OSTI)

    NONE

    1992-04-29T23:59:59.000Z

    The Office of Management and Budget (OMB) and the U.S. Army Corps of Engineers have completed an analysis of the Department of Energy's (DOE) Fiscal Year (FY) 1993 budget request for its Environmental Restoration and Waste Management (ERWM) program. The results were presented to an interagency review group (IAG) of senior-Administration officials for their consideration in the budget process. This analysis included evaluations of the underlying legal requirements and cost estimates on which the ERWM budget request was based. The major conclusions are contained in a separate report entitled, ''Interagency Review of the Department of Energy Environmental Restoration and Waste Management Program.'' This Corps supplemental report provides greater detail on the cost analysis.

  9. Turfgrass: Maintenance Costs in Texas.

    E-Print Network [OSTI]

    Holt, Ethan C.; Allen, W. Wayne; Ferguson, Marvin H.

    1964-01-01T23:59:59.000Z

    . These regions also have high water costs. The Gulf Coast, where water is a minor item, has an average expenditure only slightly greater than half that in West Texas. Average lawn sizes in these two regions are almost identical. Use of com- post, commercial.... Individuals with grasses other than bermuda and St. Augustine spend on the average about 53 percent TARLE 2. TOTALS OF VARIOUS HOME LAWN MAINTENANCE EXPENDITURES WITHIN REGIONS AND FOR THE STATE1 Number of Maintenance items Region households Commercial...

  10. Low Cost Hydrogen Production Platform

    SciTech Connect (OSTI)

    Timothy M. Aaron, Jerome T. Jankowiak

    2009-10-16T23:59:59.000Z

    A technology and design evaluation was carried out for the development of a turnkey hydrogen production system in the range of 2.4 - 12 kg/h of hydrogen. The design is based on existing SMR technology and existing chemical processes and technologies to meet the design objectives. Consequently, the system design consists of a steam methane reformer, PSA system for hydrogen purification, natural gas compression, steam generation and all components and heat exchangers required for the production of hydrogen. The focus of the program is on packaging, system integration and an overall step change in the cost of capital required for the production of hydrogen at small scale. To assist in this effort, subcontractors were brought in to evaluate the design concepts and to assist in meeting the overall goals of the program. Praxair supplied the overall system and process design and the subcontractors were used to evaluate the components and system from a manufacturing and overall design optimization viewpoint. Design for manufacturing and assembly (DFMA) techniques, computer models and laboratory/full-scale testing of components were utilized to optimize the design during all phases of the design development. Early in the program evaluation, a review of existing Praxair hydrogen facilities showed that over 50% of the installed cost of a SMR based hydrogen plant is associated with the high temperature components (reformer, shift, steam generation, and various high temperature heat exchange). The main effort of the initial phase of the program was to develop an integrated high temperature component for these related functions. Initially, six independent concepts were developed and the processes were modeled to determine overall feasibility. The six concepts were eventually narrowed down to the highest potential concept. A US patent was awarded in February 2009 for the Praxair integrated high temperature component design. A risk analysis of the high temperature component was conducted to identify any potential design deficiency related to the concept. The analysis showed that no fundamental design flaw existed with the concept, but additional simulations and prototypes would be required to verify the design prior to fabricating a production unit. These identified risks were addressed in detail during Phase II of the development program. Along with the models of the high temperature components, a detailed process and 3D design model of the remainder of system, including PSA, compression, controls, water treatment and instrumentation was developed and evaluated. Also, in Phase II of the program, laboratory/fullscale testing of the high temperature components was completed and stable operation/control of the system was verified. The overall design specifications and test results were then used to develop accurate hydrogen costs for the optimized system. Praxair continued development and testing of the system beyond the Phase II funding provided by the DOE through the end of 2008. This additional testing is not documented in this report, but did provide significant additional data for development of a prototype system as detailed in the Phase III proposal. The estimated hydrogen product costs were developed (2007 basis) for the 4.8 kg/h system at production rates of 1, 5, 10, 100 and 1,000 units built per year. With the low cost SMR approach, the product hydrogen costs for the 4.8 kg/h units at 50 units produced per year were approximately $3.02 per kg. With increasing the volume production to 1,000 units per year, the hydrogen costs are reduced by about 12% to $2.67 per kg. The cost reduction of only 12% is a result of significant design and fabrication efficiencies being realized in all levels of production runs through utilizing the DFMA principles. A simplified and easily manufactured design does not require large production volumes to show significant cost benefits. These costs represent a significant improvement and a new benchmark in the cost to produce small volume on-site hydrogen using existing process technologies. The cost mo

  11. Rebalancing an Investment Portfolio in the Presence of Convex Transaction Costs and Market Impact Costs

    E-Print Network [OSTI]

    Mitchell, John E.

    Rebalancing an Investment Portfolio in the Presence of Convex Transaction Costs and Market Impact transaction costs. The loss to a portfolio from market impact costs is typically modeled with a convex, transaction costs, market impact costs, rebalanc- ing, conic optimization, convex optimization. 1 #12

  12. MULTI-TARGET ASSIGNMENT AND PATH PLANNING FOR GROUPS OF UAVS

    E-Print Network [OSTI]

    Minai, Ali A.

    Chapter 1 MULTI-TARGET ASSIGNMENT AND PATH PLANNING FOR GROUPS OF UAVS Theju Maddula Ali A. Minai of Cincinnati Cincinnati, OH 45221 Abstract Uninhabited autonomous vehicles (UAVs) have many useful military in the possibility of using large teams (swarms) of UAVs functioning cooperatively to accomplish a large number

  13. Assignment on Algebra for Coding Theory EE512: Error Control Coding

    E-Print Network [OSTI]

    Thangaraj, Andrew

    of polynomials with coefficients from Z18. Find a, b Z18 (a = 1) such that 2x(x + 1) = 2x(ax + b) in Z18[xAssignment on Algebra for Coding Theory EE512: Error Control Coding Questions marked (Q) or (F

  14. Physics 212E Classical and Modern Physics Spring 2012 Assignments for Week 5

    E-Print Network [OSTI]

    Vollmayr-Lee, Ben

    Physics 212E Classical and Modern Physics Spring 2012 Assignments for Week 5 Reading Class Date coils, and rapid relative motion. Suppose you could move a large 1.0 T magnet over the face of a 10 cm diameter 200-turn coil. What time interval between maximum flux and no flux would you need to produce

  15. Assurance of Learning Assessment Matrix -MS Finance Learning Goals Learning Objectives Assessment/Assignment

    E-Print Network [OSTI]

    Niebur, Ernst

    /Assignment Understand and master core concepts and methods in the finance discipline and their application in business Modeling and Valuation Individual company project A part of the comprehensive final exam 1.2 Students and solve current and emerging business problems. BU.230.620 Financial Modeling and Valuation Individual

  16. Assigning African elephant DNA to geographic region of origin: Applications to the ivory trade

    E-Print Network [OSTI]

    Stephens, Matthew

    Assigning African elephant DNA to geographic region of origin: Applications to the ivory trade for review May 7, 2004) Resurgence of illicit trade in African elephant ivory is placing the elephant geographic- specific allele frequencies over the entire African elephants' range for 16 microsatellite loci

  17. PID Controller Synthesis with Shifted Axis Pole Assignment for a Class of MIMO Systems

    E-Print Network [OSTI]

    Gundes, A. N.

    PID Controller Synthesis with Shifted Axis Pole Assignment for a Class of MIMO Systems A. N. G-output plants, a systematic synthesis is developed for stabilization using Proportional+Integral+Derivative (PID-zero of the plant. Plant classes that admit PID controllers with this property include stable and unstable multi

  18. Raman excitation profiles for the (n1, n2) assignment in carbon nanotubes

    E-Print Network [OSTI]

    Nabben, Reinhard

    Raman excitation profiles for the (n1, n2) assignment in carbon nanotubes H. Telg , J. Maultzsch indices n1 and n2 in semiconducting and metallic nanotubes was performed comparing resonance Raman nanotube families. Ever since the discovery of how to keep isolated nanotubes from rebundeling in solu

  19. APPROXIMATELY OPTIMAL ASSIGNMENT FOR UNEQUAL LOSS Alexander E. Mohr, Richard E. Ladner

    E-Print Network [OSTI]

    Washington at Seattle, University of

    of a utility function over that data. After discussing network loss estimation, Reed≠ Solomon codes are brieflyAPPROXIMATELY OPTIMAL ASSIGNMENT FOR UNEQUAL LOSS PROTECTION Alexander E. Mohr, Richard E. Ladner≠2350 Eve A. Riskin Box 352500 Department of Electrical Engr. University of Washington Seattle, WA 98195

  20. APPROXIMATELY OPTIMAL ASSIGNMENT FOR UNEQUAL LOSS Alexander E. Mohr, Richard E. Ladner

    E-Print Network [OSTI]

    Mohr, Alexander E.

    of a utility function over that data. After discussing network loss estimation, Reed- Solomon codes are brieflyAPPROXIMATELY OPTIMAL ASSIGNMENT FOR UNEQUAL LOSS PROTECTION Alexander E. Mohr, Richard E. Ladner-2350 Eve A. Riskin Box 352500 Department of Electrical Engr. University of Washington Seattle, WA 98195

  1. Math 0280 Introduction to Matrices and Linear Algebra Exploration Assignment #2

    E-Print Network [OSTI]

    Wang, Dehua

    multiplication and finding inverses in MATLAB, we discuss 1) Markov chains and 2) graphs. MATLAB CONCEPTS.e., A = AT ). In fact, the adjacency matrix of any graph is symmetric, because if there is an edge between vertices iMath 0280 Introduction to Matrices and Linear Algebra Exploration Assignment #2 (Matrix Operations

  2. A Markov Decision Process based Flow Assignment Framework for Heterogeneous Network Access

    E-Print Network [OSTI]

    Alpcan, Tansu

    Engineering, Stanford University, Stanford, CA 94305, USA Varun Sharma Lehman Brothers Inc., India Abstract an optimal policy for allocation of flows to different networks. The optimal policy maximizes, under of the flow utilities. The flow assignment policy is periodically updated and is consulted by the flows

  3. CS1428 : Honors Assignment 0: Algorithms in Real Life and Hello World

    E-Print Network [OSTI]

    Qasem, Apan - Department of Computer Science, Texas State University

    CS1428 : Honors Assignment 0: Algorithms in Real Life and Hello World 100 Points Due: Friday, Sep 6. The write-up does not need to be elaborate (1 page is sufficient). 2 Hello World Description For part two of this assginment you will write the hello world program in C++. This program has traditionally been the first

  4. Plan for Can Collectors on UBC Campus PLAN 503: Assignment 2

    E-Print Network [OSTI]

    Plan for Can Collectors on UBC Campus PLAN 503: Assignment 2 School of Community and Regional to the issue of can collectors or "binners" on UBC campus. The research is part of a longer plan, which necessity as their primary motivation. According to interviews to some can collectors in Vancouver, major

  5. ME 4171 Environmentally Conscious Design & Manufacturing (Bras) Assignment Aircraft Fuel Tank Production Pollution Prevention

    E-Print Network [OSTI]

    ME 4171 ­ Environmentally Conscious Design & Manufacturing (Bras) Assignment ­ Aircraft Fuel Tank Production Pollution Prevention A local company manufactures a wide variety of fabric fuel tanks for use mainly in the aircraft industry. The main reasons for using fabric in the construction of these tanks

  6. CNT4704: Analysis of Computer Communication Networks (Fall 2014) Programming Assignment 3: Port Scanning Tool

    E-Print Network [OSTI]

    Zou, Cliff C.

    CNT4704: Analysis of Computer Communication Networks (Fall 2014) Programming Assignment 3: Port will reinforce your socket programming knowledge and skill to generate a small but useful port scanning tool, which can scan a remote machine for a range of TCP ports in order to find which TCP services have been

  7. Simultaneous Team Assignment and Behavior Recognition from Spatio-temporal Agent Traces

    E-Print Network [OSTI]

    Sukthankar, Gita Reese

    -embodied agent teams. We define team activity recognition as the process of identifying team behaviors from to be static; this paper specif- ically addresses the problem of behavior recognition for teams with dynamic to perform multiple be- haviors in parallel. Relaxing the assumption of static team assignment is desirable

  8. Evaluating cost-reduction alternatives and low-cost sourcing opportunities for aerospace castings and forgings

    E-Print Network [OSTI]

    Obermoller, Amber J

    2008-01-01T23:59:59.000Z

    As companies continue to outsource large portions of their manufacturing, managing costs in the supply chain is increasingly important in reducing overall costs and remaining competitive. Low-cost sourcing has become an ...

  9. Assignment 6

    E-Print Network [OSTI]

    by graphing the function f (x) = We2 + x + l + x. (b) Use a table of values of f (x) to guess the value of the limit. (c) Prove that your guess is correct. E 36. (a) Use a†...

  10. Assignment 4

    E-Print Network [OSTI]

    represents the electric current ?owing from the capacitor to the ?ash bulb ... If you watch the speedometer of a car as you travel in city traf?c, you see that the†...

  11. ASSIGNMENT 5 :

    E-Print Network [OSTI]

    and other fish eating fish than was true before or after the war. Let x=x(t) denote the population of prey and y=y(t) the population of predators. From section.

  12. MATLAB Assignments

    E-Print Network [OSTI]

    The graph is pretty crude because 9 oscillates more as x increases. A second way to .... The diagonal matrix V lists the eigenvalues of A and the corresponding

  13. Assignment 2

    E-Print Network [OSTI]

    We also notice that the curve begins its cycle on March 21, the 80th day of the year, ... Two functions f and g can be combined to form new functions f + g, f * g, fg, and f/g in ..... It is used in the study of electric circuits to represent the 63". ... Figure 1 shows a sector of a circle with central angle 6 and radius r subtending an arc.

  14. Assignment Sheet

    E-Print Network [OSTI]

    Bailey, Charlotte M

    2012-12-12T23:59:59.000Z

    A one-line, scientific calculator with logarithm and exponential functions is required. ... Problems in bold print are to be completed on paper and may be collected by .... LAST DAY TO WITHDRAW FROM THE COURSE (WILL RECEIVE A 'W').

  15. Assignment 1

    E-Print Network [OSTI]

    types of functions that occur in calculus and describe the process of using these ... (input) f(x). (output). F IG U R E 2. Machine diagram for a function f. FIGURE 3.

  16. GENERAL ASSIGNMENT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun with Big Sky Learning Fun with Big SkyDIII-D PerformanceGEGE,

  17. Assignment 3

    E-Print Network [OSTI]

    ria in a limited nutrient medium; the size of the bacteria population was ... Horizontol line Test A function is one-to-one if and only if no horizontal line inter-.

  18. Cost effectiveness of sonic drilling

    SciTech Connect (OSTI)

    Masten, D.; Booth, S.R.

    1996-03-01T23:59:59.000Z

    Sonic drilling (combination of mechanical vibrations and rotary power) is an innovative environmental technology being developed in cooperation with DOE`s Arid-Site Volatile Organic Compounds Integrated Demonstration at Hanford and the Mixed Waste Landfill Integrated Demonstration at Sandia. This report studies the cost effectiveness of sonic drilling compared with cable-tool and mud rotary drilling. Benefit of sonic drilling is its ability to drill in all types of formations without introducing a circulating medium, thus producing little secondary waste at hazardous sites. Progress has been made in addressing the early problems of failures and downtime.

  19. 1998 Cost and Quality Annual

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam Coal Import CostsLiquids Reserve3. LightingImports Building7.p e u u8)

  20. COST AND QUALITY TABLES 95

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam Coal Import CostsLiquidsYearReservesm 3 (D CD ^ Q) r* o' 3 a 3

  1. Low Cost Non-Reactive

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and InterfacesAdministration - Rocky MountainPrepared: 10/28/09 Low Cost

  2. Updating MIT's cost estimation model for shipbuilding

    E-Print Network [OSTI]

    Smith, Matthew B., Lieutenant, junior grade

    2008-01-01T23:59:59.000Z

    This thesis project will update the MIT ship cost estimation model by combining the two existing models (the Basic Military Training School (BMTS) Cost Model and the MIT Math Model) in order to develop a program that can ...

  3. Cost of Offshore Wind Energy Charlene Nalubega

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Cost of Offshore Wind Energy and Industrial Engineering The focus of my research is to estimate the cost of floating offshore wind turbines water as well as on land based wind farms. The specific offshore wind energy case under consideration

  4. Low-Cost Installation of Concentrating Photovoltaic

    E-Print Network [OSTI]

    Low-Cost Installation of Concentrating Photovoltaic Renewable Energy Research Renewable Energy inhibit the potential growth of the California photovoltaic market: high installation costs, expenses improvements have been made in recent years on the assembly and deployment of flatplate photovoltaic

  5. Costs Associated With Propane Vehicle Fueling Infrastructure

    SciTech Connect (OSTI)

    Smith, M.; Gonzales, J.

    2014-08-01T23:59:59.000Z

    This document is designed to help fleets understand the cost factors associated with propane vehicle fueling infrastructure. It provides an overview of the equipment and processes necessary to develop a propane fueling station and offers estimated cost ranges.

  6. 2010 Cost of Wind Energy Review

    SciTech Connect (OSTI)

    Tegen, S.; Hand, M.; Maples, B.; Lantz, E.; Schwabe, P.; Smith, A.

    2012-04-01T23:59:59.000Z

    This document provides a detailed description of NREL's levelized cost of wind energy equation, assumptions and results in 2010, including historical cost trends and future projections for land-based and offshore utility-scale wind.

  7. How to Reduce Energy Supply Costs

    E-Print Network [OSTI]

    Swanson, G.

    2007-01-01T23:59:59.000Z

    Rising energy costs have many businesses looking for creative ways to reduce their energy usage and lower the costs of energy delivered to their facilities. This paper explores innovative renewable and alternative energy technologies that can help...

  8. Breaking the Fuel Cell Cost Barrier

    Broader source: Energy.gov (indexed) [DOE]

    the Fuel Cell Cost Barrier AMFC Workshop May 8 th , 2011, Arlington, VA Shimshon Gottesfeld, CTO The Fuel Cell Cost Challenge 2 CellEra's goal - achieve price parity with...

  9. Sunk Costs and Real Options in Antitrust

    E-Print Network [OSTI]

    Pindyck, Robert S.

    2005-07-29T23:59:59.000Z

    Sunk costs play a central role in antitrust economics, but are often misunderstood and mismeasured. I will try to clarify some of the conceptual and empirical issues related to sunk costs, and explain their implications ...

  10. Cost Principles Webinar for DOE Grant Recipients

    Broader source: Energy.gov [DOE]

    The Office of Management and Budget (OMB) Cost Principles in the Code of Federal Regulations (CFR) define, by organization type, what kinds of costs are allowable or unallowable for reimbursement...

  11. How Much Does That Incinerator Cost?

    E-Print Network [OSTI]

    Mukhtar, Saqib; Nash, Catherine; Harman, Wyatte; Padia, Reema

    2008-07-25T23:59:59.000Z

    Biosecurity on poultry farms includes proper disposal of dead carcasses. In many cases, that means using an incinerator. Calculating the cost of an incinerator means considering long and short-term expenses and the cost of fuel. This publication...

  12. Life Cycle Cost Analysis for Sustainable Buildings

    Broader source: Energy.gov [DOE]

    To help facility managers make sound decisions, FEMP provides guidance and resources on applying life cycle cost analysis (LCCA) to evaluate the cost-effectiveness of energy and water efficiency investments.

  13. A Manager's Approach to Energy Cost Management

    E-Print Network [OSTI]

    Spencer, R. J.

    A major responsibility of management is the control and containment of operating costs. Energy costs are a major portion of the industrial budget. GM has developed a 3 phase approach to energy conservation. Phase I -Administrative Controls...

  14. Hydrogen Production Cost Estimate Using Biomass Gasification

    E-Print Network [OSTI]

    Hydrogen Production Cost Estimate Using Biomass Gasification National Renewable Energy Laboratory% postconsumer waste #12;i Independent Review Panel Summary Report September 28, 2011 From: Independent Review Panel, Hydrogen Production Cost Estimate Using Biomass Gasification To: Mr. Mark Ruth, NREL, DOE

  15. Using Natural Gas Transmission Pipeline Costs to Estimate Hydrogen Pipeline Costs

    E-Print Network [OSTI]

    Parker, Nathan

    2004-01-01T23:59:59.000Z

    future estimates of hydrogen pipelines. Construction Cost (does this mean for hydrogen pipelines? The objective of thisinto the cost of hydrogen pipelines. To this end I will

  16. Low cost computer interface using eye tracking

    E-Print Network [OSTI]

    Zee, Bernard Chan Heng

    2012-06-07T23:59:59.000Z

    /ANO PBO/Aa Pe I/AS PB2/AIO Pea/AII PB4/A12 Pea/Aia Pea/AI 4 Per/A15 PAOIIGS e Q 5 ii ( & 0 S MC88HC11A8 Pin Assignments (52 pin PLCC) Q41 ge Qae Q44 /44/ 042 04' fae/ Q4i 038 039 Qa) 089 Qaa 049 /DI 01 03 05 O' SO" 000' 0'0' ~I Oi..., Q? 0? 019 08 /De Q~) 026 Qze Q24 022 Qzo Ga 028 /07 boa 021 Pin assignments for 52- pin chip carrier socket Figure 7. Pin assignments of the microcontroller 24 tor and its line assembler facilities. Later coding and software tests were...

  17. Determining the Lowest-Cost Hydrogen Delivery Mode

    E-Print Network [OSTI]

    Yang, Christopher; Ogden, Joan M

    2008-01-01T23:59:59.000Z

    Costs to Estimate Hydrogen Pipeline Costs. 2004, ITS-Davis:hydrogen. The cost of hydrogen pipeline delivery depends onCosts to Estimate Hydrogen Pipeline Costs. 2004, ITS-Davis:

  18. Costs of Generating Electrical Energy 1.0 Overview

    E-Print Network [OSTI]

    McCalley, James D.

    be divided into two broad areas: ownership or sunk costs and operating or avoidable costs. These costs (sunk) costs Operating (avoidable) costs Interest on bonds Return to stockholders Property taxes

  19. Hydrogen refueling station costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

    2007-01-01T23:59:59.000Z

    analysis Costs of storing and transporting hydrogen A comprehensive comparison of fuel options for fuel cell vehicles

  20. An algorithm for minimization of quantum cost

    E-Print Network [OSTI]

    Anindita Banerjee; Anirban Pathak

    2010-04-09T23:59:59.000Z

    A new algorithm for minimization of quantum cost of quantum circuits has been designed. The quantum cost of different quantum circuits of particular interest (eg. circuits for EPR, quantum teleportation, shor code and different quantum arithmetic operations) are computed by using the proposed algorithm. The quantum costs obtained using the proposed algorithm is compared with the existing results and it is found that the algorithm has produced minimum quantum cost in all cases.

  1. Evolving Utility Cost-Effectiveness Test Criteria

    Broader source: Energy.gov [DOE]

    Presents an overview of tests done to evaluate the cost-effectiveness of energy efficiency program benefits.

  2. What does a negawatt really cost?

    E-Print Network [OSTI]

    Joskow, Paul L.

    1991-01-01T23:59:59.000Z

    We use data from ten utility conservation programs to calculate the cost per kWh of electricity saved -- the cost of a "negawatthour" -- resulting from these programs. We first compute the life-cycle cost per kWh saved ...

  3. Renewable Portfolio Standards: Costs and Benefits (Poster)

    SciTech Connect (OSTI)

    Bird, L.; Heeter, J.; Barbose, G.; Weaver, S.; Flores, F.; Kuskova-Burns, K.; Wiser, R.

    2014-10-01T23:59:59.000Z

    This report summarizes state-level RPS costs to date, and considers how those costs may evolve going forward given scheduled increases in RPS targets and cost containment mechanisms. The report also summarizes RPS benefits estimates, based on published studies for individual states and discusses key methodological considerations.

  4. Computational Energy Cost of TCP Bokyung Wang

    E-Print Network [OSTI]

    Singh, Suresh

    present results from a detailed energy measurement study of TCP. We focus on the node- level cost have characterized the cost of the primary TCP functions; (3) our node-level energy models canComputational Energy Cost of TCP Bokyung Wang Telecommunications System Division SAMSUNG

  5. Costs and business models in scientific

    E-Print Network [OSTI]

    Rambaut, Andrew

    Costs and business models in scientific research publishing A report commissioned by the Wellcome Trust DP-3114.p/100/04-2004/JM #12;Costs and business models in scientific research publishing A report, Cambridgeshire CB4 9ZR, UK Tel: +44 (0)1223 209400 Web: www.sqw.co.uk #12;Costs and business models in scientific

  6. Hydrogen Pathway Cost Distributions Jim Uihlein

    E-Print Network [OSTI]

    Components Feedstock Production Delivery Total Delivered Hydrogen Cost Biomass Central Pipeline Distribution produce hydrogen at 300 psi · Liquefaction or pipeline compression included in delivery · Delivery costsHydrogen Pathway Cost Distributions Jim Uihlein Fuel Pathways Integration Tech Team January 25

  7. Liquefaction and Pipeline Costs Bruce Kelly

    E-Print Network [OSTI]

    1 Liquefaction and Pipeline Costs Bruce Kelly Nexant, Inc. Hydrogen Delivery Analysis Meeting May 8 are representative of hydrogen pipeline costs; 10 percent added to unit hydrogen costs as a contingency Better-9, 2007 Columbia, Maryland #12;2 Hydrogen Liquefaction Basic process Compress Cool to temperature

  8. Defense waste transportation: cost and logistics studies

    SciTech Connect (OSTI)

    Andrews, W.B.; Cole, B.M.; Engel, R.L.; Oylear, J.M.

    1982-08-01T23:59:59.000Z

    Transportation of nuclear wastes from defense programs is expected to significantly increase in the 1980s and 1990s as permanent waste disposal facilities come into operation. This report uses models of the defense waste transportation system to quantify potential transportation requirements for treated and untreated contact-handled transuranic (CH-TRU) wastes and high-level defense wastes (HLDW). Alternative waste management strategies in repository siting, waste retrieval and treatment, treatment facility siting, waste packaging and transportation system configurations were examined to determine their effect on transportation cost and hardware requirements. All cost estimates used 1980 costs. No adjustments were made for future changes in these costs relative to inflation. All costs are reported in 1980 dollars. If a single repository is used for defense wastes, transportation costs for CH-TRU waste currently in surface storage and similar wastes expected to be generated by the year 2000 were estimated to be 109 million dollars. Recovery and transport of the larger buried volumes of CH-TRU waste will increase CH-TRU waste transportation costs by a factor of 70. Emphasis of truck transportation and siting of multiple repositories would reduce CH-TRU transportation costs. Transportation of HLDW to repositories for 25 years beginning in 1997 is estimated to cost $229 M in 1980 costs and dollars. HLDW transportation costs could either increase or decrease with the selection of a final canister configuration. HLDW transportation costs are reduced when multiple repositories exist and emphasis is placed on truck transport.

  9. Cost Accounting System for fusion studies

    SciTech Connect (OSTI)

    Hamilton, W.R.; Keeton, D.C.; Thomson, S.L.

    1985-12-01T23:59:59.000Z

    A Cost Accounting System that is applicable to all magnetic fusion reactor design studies has been developed. This system provides: (1) definitions of the elements of cost and methods for the combination of these elements to form a cost estimate; (2) a Code of Accounts that uses a functional arrangement for identification of the plant components; and (3) definitions and methods to analyze actual cost data so that the data can be directly reported into this Cost Accounting System. The purpose of the Cost Accounting System is to provide the structure for the development of a fusion cost data base and for the development of validated cost estimating procedures. This system has been developed through use at the Fusion Engineering Design Center (FEDC) and has been applied to different confinement concepts (tokamaks and tandem mirrors) and to different types of projects (experimental devices and commercial power plants). The use of this Cost Accounting System by all magnetic fusion projects will promote the development of a common cost data base, allow the direct comparison of cost estimates, and ultimately establish the cost credibility of the program.

  10. Cost Efficient Datacenter Selection for Cloud Services

    E-Print Network [OSTI]

    Li, Baochun

    Cost Efficient Datacenter Selection for Cloud Services Hong Xu, Baochun Li henryxu, bli and performance. They need an effective way to direct the user requests to a suitable datacenter, in a cost efficient manner. Previ- ous work focused mostly on the electricity cost of datacenters. The approaches

  11. The Economic Cost of Instructional Coaching

    E-Print Network [OSTI]

    Knight, David Stephen

    2010-12-17T23:59:59.000Z

    , this cost framework is applied to three schools with instructional coaching programs during the 2009-10 school year. The average cost per teacher was found to range from approximately $3,260 to $5,220, while model developers suggest a cost of $2,298 per...

  12. Update on the Cost of Nuclear Power

    E-Print Network [OSTI]

    Parsons, John E.

    2009-01-01T23:59:59.000Z

    We update the cost of nuclear power as calculated in the MIT (2003) Future of Nuclear Power study. Our main focus is on the changing cost of construction of new plants. The MIT (2003) study provided useful data on the cost ...

  13. Unit costs of waste management operations

    SciTech Connect (OSTI)

    Kisieleski, W.E.; Folga, S.M.; Gillette, J.L.; Buehring, W.A.

    1994-04-01T23:59:59.000Z

    This report provides estimates of generic costs for the management, disposal, and surveillance of various waste types, from the time they are generated to the end of their institutional control. Costs include monitoring and surveillance costs required after waste disposal. Available data on costs for the treatment, storage, disposal, and transportation of spent nuclear fuel and high-level radioactive, low-level radioactive, transuranic radioactive, hazardous, mixed (low-level radioactive plus hazardous), and sanitary wastes are presented. The costs cover all major elements that contribute to the total system life-cycle (i.e., ``cradle to grave``) cost for each waste type. This total cost is the sum of fixed and variable cost components. Variable costs are affected by operating rates and throughput capacities and vary in direct proportion to changes in the level of activity. Fixed costs remain constant regardless of changes in the amount of waste, operating rates, or throughput capacities. Key factors that influence cost, such as the size and throughput capacity of facilities, are identified. In many cases, ranges of values for the key variables are presented. For some waste types, the planned or estimated costs for storage and disposal, projected to the year 2000, are presented as graphics.

  14. Blackboard Learning Services V-F1 Page 1 Blackboard Inc. Digital Drop Box vs. Assignment Manager Tip Sheet

    E-Print Network [OSTI]

    Blackboard Learning Services V-F1 Page 1 Blackboard Inc. Digital Drop Box vs. Assignment Manager Tip Sheet Blackboard Best Practices: Digital Drop Box vs. Assignment Manager A Blackboard Learning causes confusion for students and instructors alike. Adding a File When a user elects to Add File

  15. A Mixed-Integer Linear Programming Model for Optimizing the Scheduling and Assignment of Tank Farm Operations

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    1 A Mixed-Integer Linear Programming Model for Optimizing the Scheduling and Assignment of Tank) formulation for the Tank Farm Operation Problem (TFOP), which involves simultaneous scheduling of continuous multi-product processing lines and the assignment of dedicated storage tanks to finished products

  16. Balance Calibration Ė A Method for Assigning a Direct-Reading Uncertainty to an Electronic Balance.

    SciTech Connect (OSTI)

    Mike Stears

    2010-07-01T23:59:59.000Z

    Paper Title: Balance Calibration Ė A method for assigning a direct-reading uncertainty to an electronic balance. Intended Audience: Those who calibrate or use electronic balances. Abstract: As a calibration facility, we provide on-site (at the customerís location) calibrations of electronic balances for customers within our company. In our experience, most of our customers are not using their balance as a comparator, but simply putting an unknown quantity on the balance and reading the displayed mass value. Manufacturerís specifications for balances typically include specifications such as readability, repeatability, linearity, and sensitivity temperature drift, but what does this all mean when the balance user simply reads the displayed mass value and accepts the reading as the true value? This paper discusses a method for assigning a direct-reading uncertainty to a balance based upon the observed calibration data and the environment where the balance is being used. The method requires input from the customer regarding the environment where the balance is used and encourages discussion with the customer regarding sources of uncertainty and possible means for improvement; the calibration process becomes an educational opportunity for the balance user as well as calibration personnel. This paper will cover the uncertainty analysis applied to the calibration weights used for the field calibration of balances; the uncertainty is calculated over the range of environmental conditions typically encountered in the field and the resulting range of air density. The temperature stability in the area of the balance is discussed with the customer and the temperature range over which the balance calibration is valid is decided upon; the decision is based upon the uncertainty needs of the customer and the desired rigor in monitoring by the customer. Once the environmental limitations are decided, the calibration is performed and the measurement data is entered into a custom spreadsheet. The spreadsheet uses measurement results, along with the manufacturerís specifications, to assign a direct-read measurement uncertainty to the balance. The fact that the assigned uncertainty is a best-case uncertainty is discussed with the customer; the assigned uncertainty contains no allowance for contributions associated with the unknown weighing sample, such as density, static charges, magnetism, etc. The attendee will learn uncertainty considerations associated with balance calibrations along with one method for assigning an uncertainty to a balance used for non-comparison measurements.

  17. Industrial heat pumps - types and costs

    SciTech Connect (OSTI)

    Chappell, R.N.; Bliem, C.J. Jr.; Mills, J.I.; Demuth, O.J.; Plaster, D.S.

    1985-08-01T23:59:59.000Z

    Confusion about energy savings and economics is preventing many potentially beneficial applications for industrial heat pumps. The variety of heat pumps available and the lack of a standard rating system cause some of this confusion. The authors illustrate how a simple categorization based on coefficient of performance (COP) can compare the cost of recovering waste energy with heat pumps. After evaluating examples in which the cost of energy delivered was calculated based on estimates of capital cost, operating costs, and maintenance costs, they compare heat pumps from the various categories on the basis of economics. 6 references, 6 figures, 1 table.

  18. Developing Information on Energy Savings and Associated Costs and Benefits of Energy Efficient Emerging Technologies Applicable in California

    E-Print Network [OSTI]

    Xu, Tengfang

    2011-01-01T23:59:59.000Z

    Cost Effectiveness Investment cost Demonstration in salad2015 Cost Effectiveness Investment cost Type of cost Change2015 Cost Effectiveness Investment cost Type of cost Change

  19. Low-cost inertial measurement unit.

    SciTech Connect (OSTI)

    Deyle, Travis Jay

    2005-03-01T23:59:59.000Z

    Sandia National Laboratories performs many expensive tests using inertial measurement units (IMUs)--systems that use accelerometers, gyroscopes, and other sensors to measure flight dynamics in three dimensions. For the purpose of this report, the metrics used to evaluate an IMU are cost, size, performance, resolution, upgradeability and testing. The cost of a precision IMU is very high and can cost hundreds of thousands of dollars. Thus the goals and results of this project are as follows: (1) Examine the data flow in an IMU and determine a generic IMU design. (2) Discuss a high cost IMU implementation and its theoretically achievable results. (3) Discuss design modifications that would save money for suited applications. (4) Design and implement a low cost IMU and discuss its theoretically achievable results. (5) Test the low cost IMU and compare theoretical results with empirical results. (6) Construct a more streamlined printed circuit board design reducing noise, increasing capabilities, and constructing a self-contained unit. Using these results, we can compare a high cost IMU versus a low cost IMU using the metrics from above. Further, we can examine and suggest situations where a low cost IMU could be used instead of a high cost IMU for saving cost, size, or both.

  20. Cost reduction potential in LMFBR design

    SciTech Connect (OSTI)

    Chang, Y.I.; Till, C.E.

    1983-08-01T23:59:59.000Z

    LWR capital costs have escalated continuously over the years to the point where today its economics represent a bar to further LWR deployment in the U.S. High initial costs and the promise of a similar pattern of cost escalation in succeeding years for the LMFBR would effectively stop LMFBR deployment in this country before it could even begin. LWR cost escalation in the main can be traced to large increases in both amounts and unit costs of construction materials and to greatly lengthened construction times. Innovative approaches to LMFBR design are now being pursued that show promise for substantial cost reductions particularly in those areas that have contributed most to LWR cost increases.

  1. The unit cost factors and calculation methods for decommissioning - Cost estimation of nuclear research facilities

    SciTech Connect (OSTI)

    Kwan-Seong Jeong; Dong-Gyu Lee; Chong-Hun Jung; Kune-Woo Lee [Korea Atomic Energy Research Institute, Deokjin-dong 150, Yuseong-gu, Daejeon 305-353 (Korea, Republic of)

    2007-07-01T23:59:59.000Z

    Available in abstract form only. Full text of publication follows: The uncertainties of decommissioning costs increase high due to several conditions. Decommissioning cost estimation depends on the complexity of nuclear installations, its site-specific physical and radiological inventories. Therefore, the decommissioning costs of nuclear research facilities must be estimated in accordance with the detailed sub-tasks and resources by the tasks of decommissioning activities. By selecting the classified activities and resources, costs are calculated by the items and then the total costs of all decommissioning activities are reshuffled to match with its usage and objectives. And the decommissioning cost of nuclear research facilities is calculated by applying a unit cost factor method on which classification of decommissioning works fitted with the features and specifications of decommissioning objects and establishment of composition factors are based. Decommissioning costs of nuclear research facilities are composed of labor cost, equipment and materials cost. Of these three categorical costs, the calculation of labor costs are very important because decommissioning activities mainly depend on labor force. Labor costs in decommissioning activities are calculated on the basis of working time consumed in decommissioning objects and works. The working times are figured out of unit cost factors and work difficulty factors. Finally, labor costs are figured out by using these factors as parameters of calculation. The accuracy of decommissioning cost estimation results is much higher compared to the real decommissioning works. (authors)

  2. Manual of functions, assignments, and responsibilities for nuclear safety: Revision 2

    SciTech Connect (OSTI)

    Not Available

    1994-10-15T23:59:59.000Z

    The FAR Manual is a convenient easy-to-use collection of the functions, assignments, and responsibilities (FARs) of DOE nuclear safety personnel. Current DOE directives, including Orders, Secretary of Energy Notices, and other assorted policy memoranda, are the source of this information and form the basis of the FAR Manual. Today, the majority of FARs for DOE personnel are contained in DOE`s nuclear safety Orders. As these Orders are converted to rules in the Code of Federal Regulations, the FAR Manual will become the sole source for information relating to the functions, assignments, responsibilities of DOE nuclear safety personnel. The FAR Manual identifies DOE directives that relate to nuclear safety and the specific DOE personnel who are responsible for implementing them. The manual includes only FARs that have been extracted from active directives that have been approved in accordance with the procedures contained in DOE Order 1321.1B.

  3. CSC 2535 -Assignment 1. Due: Feb 6, 2013, 1pm at START of class

    E-Print Network [OSTI]

    Hinton, Geoffrey E.

    ] Section 8.21 in Bishop shows three example graphs that form the basis of D-separation, using 3 variables Wjzj, 2 I) where, a1, · · · , aJ are the parameters of the Bernouilli prior on z, W is a JxD matrix and test sets, invoke matlab and load the file http://www.cs.toronto.edu/ ~hinton/csc2535/matlab/assign1

  4. Factors involved in the operation of fiberoptic dynamic lane assignment signs

    E-Print Network [OSTI]

    Sunkari, Srinivasa R

    2012-06-07T23:59:59.000Z

    51 51 51 55 55 60 60 63 67 70 72 V. CONCLUSIONS AND RECOMMENDATIONS FINDINGS AND CONCLUSIONS Layout of the Fiberoptic Signs Sign Characteristics . Sign-Signal Coordination Driver Comprehension RECOMMENDATIONS Future Studies . Future... of the various turning movements more efficiently. The application of the concept of Dynamic Lane Assignment Signs (DALAS) to frontage applications is being investigated at Texas Transportation Institute (TTI) since 1989. A changeable message sign (CMS...

  5. Math 290 -Class Activity Assignment 16 1. What are the statements of PMI and of PCI?

    E-Print Network [OSTI]

    Singman, David

    Math 290 - Class Activity Assignment 16 Solutions 1. What are the statements of PMI and of PCI? 2. Prove each of the following using PMI. (a) (n N) n i=1 1 i2 2 - 1 n . (b) (n N)[5|(8n - 3n )] (c) (n : n i=1 1 i2 2 - 1 n . We show S = N using PMI. (i) (Basis step) We see that 1 S since 1 i=1 1 i2

  6. Usage of Assignable Space 78 Number of Buildings and Square Metres 79

    E-Print Network [OSTI]

    Sun, Yu

    GROSS BUILDINGS SQUARE METRES METRES SQUARE METRES University St. George 118 613,098 996,494 1 OF ASSIGNABLE SPACE 2007-08 ST. GEORGE MISSISSAUGA SCARBOROUGH CAMPUS CAMPUS CAMPUS Teaching & Research 54% 32,160,753 Leased St. George 5 3,052 3,786 4,255 Scarborough 27 59,428 92,043 107,328 Mississauga 47 90,134 150

  7. Math 55b: Honors Advanced Calculus and Linear Algebra Homework Assignment #1 (29 January 2003)

    E-Print Network [OSTI]

    Elkies, Noam D.

    Math 55b: Honors Advanced Calculus and Linear Algebra Homework Assignment #1 (29 January 2003 dimensional vector space over R or C. Consider a function f : [a, b] L(V ), and let x [a, b]. Assume that f(x) is invertible and f is differentiable at x. Thus g(x) := (f(x))-1 exists in a neighborhood of x (possibly one

  8. Math 55b: Honors Advanced Calculus and Linear Algebra Homework Assignment #1 (4 February 2000)

    E-Print Network [OSTI]

    Elkies, Noam D.

    a function f : [a; b] ! L(V ), and let x 2 [a; b]. Assume that f(x) is invertible and f is differentiableMath 55b: Honors Advanced Calculus and Linear Algebra Homework Assignment #1 (4 February 2000 of a Wronskian. In general, if f 1 ; : : : ; fn are scalar­valued functions on [a; b] differ­ entiable n \\Gamma 1

  9. A branch-and-bound project assignment methodology with generalized network strategies for updating bounds

    E-Print Network [OSTI]

    Jittamai, Phongchai

    2012-06-07T23:59:59.000Z

    -Diaz, Sastri, and Paz 1995). Additionally, an efficient branch-and- bound procedure is highly desirable to solve integer programming models, such as the one being considered in this thesis. In summary the following are the significant contributions... heuristically to obtain near-optimal solutions. Gavish and Pirkul (1991) employed heuristic procedures and a branch-and-bound procedure to develop algorithms for solving the multi-resource generalized assignment problem. Garcia- Diaz, Sastri and Paz (1995...

  10. Department of Energy Environmental Management cost infrastructure development program: Cost analysis requirements

    SciTech Connect (OSTI)

    Custer, W.R. Jr.; Messick, C.D.

    1996-03-31T23:59:59.000Z

    This report was prepared to support development of the Department of Energy Environmental Management cost infrastructure -- a new capability to independently estimate and analyze costs. Currently, the cost data are reported according to a structure that blends level of effort tasks with product and process oriented tasks. Also. the budgetary inputs are developed from prior year funding authorizations and from contractor-developed parametric estimates that have been adjusted to planned funding levels or appropriations. Consequently, it is difficult for headquarters and field-level activities to use actual cost data and technical requirements to independently assess the costs generated and identify trends, potential cost savings from process improvements, and cost reduction strategies.

  11. Life cycle cost report of VHLW cask

    SciTech Connect (OSTI)

    NONE

    1995-06-01T23:59:59.000Z

    This document, the Life Cycle Cost Report (LCCR) for the VHLW Cask, presents the life cycle costs for acquiring, using, and disposing of the VHLW casks. The VHLW cask consists of a ductile iron cask body, called the shielding insert, which is used for storage and transportation, and ultimately for disposal of Defense High Level Waste which has been vitrified and placed into VHLW canisters. Each ductile iron VHLW shielding insert holds one VHLW canister. For transportation, the shielding insert is placed into a containment overpack. The VHLW cask as configured for transportation is a legal weight truck cask which will be licensed by NRC. The purpose of this LCCR is to present the development of the life cycle costs for using the VHLW cask to transport VHLW canisters from the generating sites to a disposal site. Life cycle costs include the cost of acquiring, operating, maintaining, and ultimately dispositioning the VHLW cask and its associated hardware. This report summarizes costs associated with transportation of the VHLW casks. Costs are developed on the basis of expected usage, anticipated source and destination locations, and expected quantities of VHLW which must be transported. DOE overhead costs, such as the costs associated with source and destination facility handling of the VHLW, are not included. Also not included are costs exclusive to storage or disposal of the VHLW waste.

  12. Determining the lowest-cost hydrogen delivery mode

    E-Print Network [OSTI]

    Yang, Christopher; Ogden, Joan M

    2007-01-01T23:59:59.000Z

    costs to estimate hydrogen pipeline costs. Davis, CA: ITS-hydrogen. The cost of hydrogen pipeline delivery de- pendshydrogen trucks, and hydrogen pipelines, were devel- oped

  13. Backup Power Cost of Ownership Analysis and Incumbent Technology...

    Energy Savers [EERE]

    Backup Power Cost of Ownership Analysis and Incumbent Technology Comparison Backup Power Cost of Ownership Analysis and Incumbent Technology Comparison This cost of ownership...

  14. The Market Value and Cost of Solar Photovoltaic Electricity Production

    E-Print Network [OSTI]

    Borenstein, Severin

    2008-01-01T23:59:59.000Z

    Investigation of Photovoltaic Cost Trends in California,ĒThe Market Value and Cost of Solar Photovoltaic ElectricityThe Market Value and Cost of Solar Photovoltaic Electricity

  15. Societal lifetime cost of hydrogen fuel cell vehicles

    E-Print Network [OSTI]

    Sun, Yongling; Ogden, J; Delucchi, Mark

    2010-01-01T23:59:59.000Z

    Societal lifetime cost of hydrogen fuel cell vehiclesthe societal cost of hydrogen fuel-cell vehicles with modelsand running costs) than hydrogen fuel-cell vehicles in 2030.

  16. Delisting -- A cost effective alternative

    SciTech Connect (OSTI)

    Pal, S.C.; Johnson, M.J. [Benchmark Engineering Inc., Birmingham, AL (United States)

    1995-12-31T23:59:59.000Z

    Delisting offers a cost-effective disposal option for some solid wastes that are listed as hazardous. Delisting involves treating a waste so that it must not: meet the criteria for which it was listed; exhibit any of the hazardous waste characteristics; and exhibit any additional factors, including other constituents, which may cause it to be a hazardous waste. A listed waste, including Cd, Cr, and Pb, at an abandoned manufacturing site in EPA Region 4 was extensively sampled and analyzed to define the extent and treatability of the waste and the impacted soil. A treatability study was conducted to demonstrate the efficacy of the selected treatment process so that the treated waste met each of the three criteria for exclusion. Complex and elaborate quality control procedures were executed to ensure data integrity throughout the process. The data were subjected to a fate and transport model to evaluate the migration potential of the landfilled treated waste by using EPA`s Composite Model for Landfill (CML) and Organic Leachate Model (OLM). A delisting petition was submitted to the state regulatory authority. After approval of the delisting petition, a work plan was prepared to implement the delisting procedures. The waste and impacted soil were excavated, treated and transported to a Subtitle D landfill for disposals

  17. Cost of a Ride: The Effects of Densities on Fixed-Guideway Transit Ridership and Capital Costs

    E-Print Network [OSTI]

    Guerra, Erick; Cervero, Robert

    2010-01-01T23:59:59.000Z

    transit Ė exceeded capital cost estimates by 40% duringfound that capital costs exceeded estimates by an averagesystems. We estimate the total capital cost, average weekday

  18. Cost of a Ride: The Effects of Densities on Fixed-Guideway Transit Ridership and Capital Costs

    E-Print Network [OSTI]

    Guerra, Erick; Cervero, Robert

    2010-01-01T23:59:59.000Z

    mile. Soaring capital investment costs are todayí s biggestof riders for the investment costs? If so, what minimumrelationship between investment costs and urban densities

  19. Hydrogen refueling station costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

    2007-01-01T23:59:59.000Z

    total installed capital cost (TIC) 1% Of TIC 25% Estimate ofcost estimates for six station types SMR 100 a Equipment capital

  20. Aerogel commercialization: Technology, markets and costs

    SciTech Connect (OSTI)

    Carlson, G.; Lewis, D.; McKinley, K.; Richardson, J.; Tillotson, T.

    1994-10-07T23:59:59.000Z

    Commercialization of aerogels has been slow due to several factors including cost and manufacturability issues. The technology itself is well enough developed as a result of work over the past decade by an international-community of researchers. Several extensive substantial markets appear to exist for aerogels as thermal and sound insulators, if production costs can keep prices in line with competing established materials. The authors discuss here the elements which they have identified as key cost drivers, and they give a prognosis for the evolution of the technology leading to reduced cost aerogel production.

  1. Optimization Online - Option - Alloction funds- Transaction costs

    E-Print Network [OSTI]

    Nader Trabelsi

    2009-04-18T23:59:59.000Z

    Apr 18, 2009 ... The replication strategy allows reducing transaction cost effects. ... the empirical evidence poses the case of a short-term investment, on CAC40†...

  2. The Law and Economics of Costly Contracting

    E-Print Network [OSTI]

    Schwartz, Alan; Watson, Joel

    2001-01-01T23:59:59.000Z

    Markets, Relational Contracting, New York: Free Press (and the Value of Contracting,Ē 89 American Economic ReviewLAW AND ECONOMICS OF COSTLY CONTRACTING BY ALAN SCHWARTZ AND

  3. Cost of Fuel to General Electricity

    Broader source: Energy.gov [DOE]

    Presentation covers the topic of the cost of fuel to general electricity for the Federal Utility Partnership Working Group (FUPWG) meeting, held on November 18-19, 2009.

  4. Wind Turbine Design Cost and Scaling Model

    SciTech Connect (OSTI)

    Fingersh, L.; Hand, M.; Laxson, A.

    2006-12-01T23:59:59.000Z

    This model intends to provide projections of the impact on cost from changes in economic indicators such as the Gross Domestic Product and Producer Price Index.

  5. Startup Costs - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and environmental projects, and estimating guidance for startup costs. g4301-1chp8.pdf -- PDF Document, 8 KB Writer: John Makepeace Subjects: Administration Management...

  6. Costs and benefits of robust optimization

    E-Print Network [OSTI]

    2010-11-13T23:59:59.000Z

    result concerning costs for robust linear optimization under convex uncertainty. In ... In [3], a stability analysis of robust optimization for linear problems under†...

  7. Process Equipment Cost Estimation, Final Report

    SciTech Connect (OSTI)

    H.P. Loh; Jennifer Lyons; Charles W. White, III

    2002-01-01T23:59:59.000Z

    This report presents generic cost curves for several equipment types generated using ICARUS Process Evaluator. The curves give Purchased Equipment Cost as a function of a capacity variable. This work was performed to assist NETL engineers and scientists in performing rapid, order of magnitude level cost estimates or as an aid in evaluating the reasonableness of cost estimates submitted with proposed systems studies or proposals for new processes. The specific equipment types contained in this report were selected to represent a relatively comprehensive set of conventional chemical process equipment types.

  8. Minimum cost model energy code envelope requirements

    SciTech Connect (OSTI)

    Connor, C.C.; Lucas, R.G.; Turchen, S.J.

    1994-08-01T23:59:59.000Z

    This paper describes the analysis underlying development of the U.S. Department of Energy`s proposed revisions of the Council of American Building Officials (CABO) 1993 Model Energy Code (MEC) building thermal envelope requirements for single-family and low-rise multifamily residences. This analysis resulted in revised MEC envelope conservation levels based on an objective methodology that determined the minimum-cost combination of energy efficiency measures (EEMs) for residences in different locations around the United States. The proposed MEC revision resulted from a cost-benefit analysis from the consumer`s perspective. In this analysis, the costs of the EEMs were balanced against the benefit of energy savings. Detailed construction, financial, economic, and fuel cost data were compiled, described in a technical support document, and incorporated in the analysis. A cost minimization analysis was used to compare the present value of the total long-nm costs for several alternative EEMs and to select the EEMs that achieved the lowest cost for each location studied. This cost minimization was performed for 881 cities in the United States, and the results were put into the format used by the MEC. This paper describes the methodology for determining minimum-cost energy efficiency measures for ceilings, walls, windows, and floors and presents the results in the form of proposed revisions to the MEC. The proposed MEC revisions would, on average, increase the stringency of the MEC by about 10%.

  9. 23rd steam-station cost survey

    SciTech Connect (OSTI)

    Friedlander, G.D.; Going, M.C.

    1983-11-01T23:59:59.000Z

    The results of the 23rd Steam Station Cost Survey covering the year 1982 are summarized. The major categories of the survey are as follows: general data; output data, 1982; fuel consumption, 1982; operation 1982 (mills/net kWh); investment ($/net kWh); energy cost, 1982 (mills/net kWh); and station performance, 1982. Thirty-one fossil-fuel steam plants and four nuclear stations were included in the survey. Fuel and operating cost increases are felt to be responsible for the moderate rise in total busbar-enery costs. 11 figures, 1 table.

  10. ICPP tank farm closure study. Volume 3: Cost estimates, planning schedules, yearly cost flowcharts, and life-cycle cost estimates

    SciTech Connect (OSTI)

    NONE

    1998-02-01T23:59:59.000Z

    This volume contains information on cost estimates, planning schedules, yearly cost flowcharts, and life-cycle costs for the six options described in Volume 1, Section 2: Option 1 -- Total removal clean closure; No subsequent use; Option 2 -- Risk-based clean closure; LLW fill; Option 3 -- Risk-based clean closure; CERCLA fill; Option 4 -- Close to RCRA landfill standards; LLW fill; Option 5 -- Close to RCRA landfill standards; CERCLA fill; and Option 6 -- Close to RCRA landfill standards; Clean fill. This volume is divided into two portions. The first portion contains the cost and planning schedule estimates while the second portion contains life-cycle costs and yearly cash flow information for each option.

  11. Cost Estimating Handbook for Environmental Restoration

    SciTech Connect (OSTI)

    NONE

    1990-09-01T23:59:59.000Z

    Environmental restoration (ER) projects have presented the DOE and cost estimators with a number of properties that are not comparable to the normal estimating climate within DOE. These properties include: An entirely new set of specialized expressions and terminology. A higher than normal exposure to cost and schedule risk, as compared to most other DOE projects, due to changing regulations, public involvement, resource shortages, and scope of work. A higher than normal percentage of indirect costs to the total estimated cost due primarily to record keeping, special training, liability, and indemnification. More than one estimate for a project, particularly in the assessment phase, in order to provide input into the evaluation of alternatives for the cleanup action. While some aspects of existing guidance for cost estimators will be applicable to environmental restoration projects, some components of the present guidelines will have to be modified to reflect the unique elements of these projects. The purpose of this Handbook is to assist cost estimators in the preparation of environmental restoration estimates for Environmental Restoration and Waste Management (EM) projects undertaken by DOE. The DOE has, in recent years, seen a significant increase in the number, size, and frequency of environmental restoration projects that must be costed by the various DOE offices. The coming years will show the EM program to be the largest non-weapons program undertaken by DOE. These projects create new and unique estimating requirements since historical cost and estimating precedents are meager at best. It is anticipated that this Handbook will enhance the quality of cost data within DOE in several ways by providing: The basis for accurate, consistent, and traceable baselines. Sound methodologies, guidelines, and estimating formats. Sources of cost data/databases and estimating tools and techniques available at DOE cost professionals.

  12. Air Pollution Physics and Chemistry EAS 6790 Home Work Assignment No. 2, Air Pollution Meteorology: Box Model

    E-Print Network [OSTI]

    Weber, Rodney

    Air Pollution Physics and Chemistry EAS 6790 Fall 2008 Home Work Assignment No. 2, Air Pollution to interpret measurements made in Mexico City. Focus mainly on the discussions relating to nitrate aerosol

  13. A Bug You Like: A Framework for Automated Assignment of Bugs Olga Baysal Michael W. Godfrey Robin Cohen

    E-Print Network [OSTI]

    Godfrey, Michael W.

    A Bug You Like: A Framework for Automated Assignment of Bugs Olga Baysal Michael W. Godfrey Robin to determine appropriate experts to work on given elements of software projects. Unlike this previous work

  14. Engi 8717 -9601, In Class Assignment, 9 March 2010 A) human waste and agricultural run-off

    E-Print Network [OSTI]

    Coles, Cynthia

    Engi 8717 - 9601, In Class Assignment, 9 March 2010 A) human waste and agricultural run-off B) reduced fertilizer use (or no fertilizer use), ii) wetlands need to be reintroduced into the catchments

  15. WREF 2012: THE PAST AND FUTURE COST OF WIND ENERGY

    E-Print Network [OSTI]

    Wiser, Ryan

    2013-01-01T23:59:59.000Z

    Developments in the Levelized Cost of Energy From U.S. Windreducing the levelized cost of energy (LCOE) for onshore

  16. Cost Structure and Control: The Dominant Issues in

    E-Print Network [OSTI]

    or not a crop is planted (the costs are sunk) whereas variable costs will increase or decrease as a function

  17. External Costs of Transport in the U.S.

    E-Print Network [OSTI]

    Delucchi, Mark A.; McCubbin, Donald R.

    2010-01-01T23:59:59.000Z

    externalities are the unaccounted for or unpriced costs ofexplicit prices and unaccounted-for costs of those choices.

  18. Low-Cost Manufacturable Microchannel Systems for Passive

    E-Print Network [OSTI]

    for use in fuel cell systems need development in order to achieve cost targets. Low-cost, highLow-Cost Manufacturable Microchannel Systems for Passive PEM Water Management IIPS Number 16910 LowLow--CostCost;2 Project objective: Create a low cost and passive PEM water management system Project objective

  19. Interdisciplinary Institute for Innovation Estimating the costs of nuclear

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    on this topic is fairly confusing. Some present electricity production using nuclear power as an affordable of costs and draw a distinction between a private cost and a social cost. The private cost is what evaluating the costs it is impossible to establish the cost price, required to compare electricity production

  20. 2009 Cost Estimates of Establishing and

    E-Print Network [OSTI]

    Collins, Gary S.

    2009 Cost Estimates of Establishing and Producing Gala Apples in Washington WASHINGTON STATE include estimating 1) the costs of the equipment, materials, supplies, and labor required to establish for any particular orchard operation due to case-specific: ∑ Capital, labor, and natural resources ∑ Crop

  1. 2013 Cost Estimation of Establishing a

    E-Print Network [OSTI]

    Collins, Gary S.

    1 2013 Cost Estimation of Establishing a Cider Apple Orchard in Western Washington W A S H I N G factors: ∑ Capital, labor, and natural resources ∑ Crop yield ∑ Cultural practices ∑ Input prices Cost estimations in this enterprise budget also vary depending on the budget's intended use. To avoid

  2. www.praxair.com Low Cost Hydrogen

    E-Print Network [OSTI]

    www.praxair.com Low Cost Hydrogen Production Platform Cooperative Agreement: DE-FC36-01GO11004 Timothy M. Aaron Team Praxair - Tonawanda, NY Boothroyd-Dewhurst - Wakefield, RI Diversified Manufacturing (Hot Components Only) Praxair HGS Comparison 1/4 Capacity 1/6 Physical Plant Size Lower H2 Cost

  3. Draft Submission; Social Cost of Energy Generation

    SciTech Connect (OSTI)

    None

    1990-01-05T23:59:59.000Z

    This report is intended to provide a general understanding of the social costs associated with electric power generation. Based on a thorough review of recent literature on the subject, the report describes how these social costs can be most fully and accurately evaluated, and discusses important considerations in applying this information within the competitive bidding process. [DJE 2005

  4. Cost effectiveness of recycling: A systems model

    SciTech Connect (OSTI)

    Tonjes, David J., E-mail: david.tonjes@stonybrook.edu [Department of Technology and Society, College of Engineering and Applied Sciences, Stony Brook University, Stony Brook, NY 11794-3560 (United States); Waste Reduction and Management Institute, School of Marine and Atmospheric Sciences, Stony Brook University, Stony Brook, NY 11794-5000 (United States); Center for Bioenergy Research and Development, Advanced Energy Research and Technology Center, Stony Brook University, 1000 Innovation Rd., Stony Brook, NY 11794-6044 (United States); Mallikarjun, Sreekanth, E-mail: sreekanth.mallikarjun@stonybrook.edu [Department of Technology and Society, College of Engineering and Applied Sciences, Stony Brook University, Stony Brook, NY 11794-3560 (United States)

    2013-11-15T23:59:59.000Z

    Highlights: ē Curbside collection of recyclables reduces overall system costs over a range of conditions. ē When avoided costs for recyclables are large, even high collection costs are supported. ē When avoided costs for recyclables are not great, there are reduced opportunities for savings. ē For common waste compositions, maximizing curbside recyclables collection always saves money. - Abstract: Financial analytical models of waste management systems have often found that recycling costs exceed direct benefits, and in order to economically justify recycling activities, externalities such as household expenses or environmental impacts must be invoked. Certain more empirically based studies have also found that recycling is more expensive than disposal. Other work, both through models and surveys, have found differently. Here we present an empirical systems model, largely drawn from a suburban Long Island municipality. The model accounts for changes in distribution of effort as recycling tonnages displace disposal tonnages, and the seven different cases examined all show that curbside collection programs that manage up to between 31% and 37% of the waste stream should result in overall system savings. These savings accrue partially because of assumed cost differences in tip fees for recyclables and disposed wastes, and also because recycling can result in a more efficient, cost-effective collection program. These results imply that increases in recycling are justifiable due to cost-savings alone, not on more difficult to measure factors that may not impact program budgets.

  5. Costs of Oil Dependence: A 2000 Update

    SciTech Connect (OSTI)

    Greene, D.L.

    2000-05-17T23:59:59.000Z

    Oil dependence remains a potentially serious economic and strategic problem for the United States. This report updates previous estimates of the costs of oil dependence to the U.S. economy and introduces several methodological enhancements. Estimates of the costs to the U.S. economy of the oil market upheavals of the last 30 years are in the vicinity of $7 trillion, present value 1998 dollars, about as large as the sum total of payments on the national debt over the same period. Simply adding up historical costs in 1998 dollars without converting to present value results in a Base Case cost estimate of $3.4 trillion. Sensitivity analysis indicates that cost estimates are sensitive to key parameters. A lower bound estimate of $1.7 trillion and an upper bound of $7.1 trillion (not present value) indicate that the costs of oil dependence have been large under almost any plausible set of assumptions. These cost estimates do not include military, strategic or political costs associated with U.S. and world dependence on oil imports.

  6. Cost of Oil Dependence: A 2000 Update

    SciTech Connect (OSTI)

    Greene, D.L.; Tishchishyna, N.I.

    2000-05-01T23:59:59.000Z

    Oil dependence remains a potentially serious economic and strategic problem for the United States. This report updates previous estimates of the costs of oil dependence to the U.S. economy and introduces several methodological enhancements. Estimates of the costs to the U.S. economy of the oil market upheavals of the last 30 years are in the vicinity of $7 trillion, present value 1998 dollars, about as large as the sum total of payments on the national debt over the same period. Simply adding up historical costs in 1998 dollars without converting to present value results in a Base Case cost estimate of $3.4 trillion. Sensitivity analysis indicates that cost estimates are sensitive to key parameters. A lower bound estimate of $1.7 trillion and an upper bound of $7.1 trillion (not present value) indicate that the costs of oil dependence have been large under almost any plausible set of assumptions. These cost estimates do not include military, strategic or political costs associated with U.S. and world dependence on oil imports.

  7. BUSINESS PLAN NIRMAL: LOW COST WATER PURIFICATION

    E-Print Network [OSTI]

    Mlllet, Dylan B.

    the water. Hence we intend to address the issue by providing a low cost water purification system usingNIRMAL #12;BUSINESS PLAN 2 NIRMAL: LOW COST WATER PURIFICATION I. Executive summary Nearly one area, it makes sense to transport the point of use purification system itself. Field research by team

  8. Costs of Growing Broilers Under Cotract.

    E-Print Network [OSTI]

    Magee, A. C. (Aden Combs); Stone, B. H.; Wormeli, B. C. (Ben C.)

    1964-01-01T23:59:59.000Z

    ................................................................................ Interest 6 ...... Taxes 6 Other Costs of the Broiler Grower . 6 Heat for Brooding 6 . . . . Electr~c~ty for Lighting ......................................................... 6 Labor-Regular Care... .......................................................... 6 Labor-Catching Birds ....................................................... 6 Cleaning Out Manure ......................................................... 6 Costs and Returns-Contract Broiler Production .......................... 6 Part...

  9. High Performance, Low Cost Hydrogen Generation from

    E-Print Network [OSTI]

    Alternate deposition techniques and engineered nanostructures Supplier qualification, near term cost Qualification · Task 7.0: H2A Model Cost Analysis ­ Input design parameters ­ Assess impact of changes #12% 5 Bipolar Plate Manufacturing Development 06/30/13 0% 6 Bipolar Plate Manufacturing Qualification 09

  10. Multiperiod Portfolio Optimization with General Transaction Costs

    E-Print Network [OSTI]

    2013-07-17T23:59:59.000Z

    Department of Management Science and Operations, London Business School, ... For market impact costs, we show that the optimal portfolio policy at each ... Markowitz's analysis are that the investor only cares about single-period ... The case with a single-risky asset and proportional transaction costs is well understood.

  11. Los Alamos National Laboratory Building Cost Index

    SciTech Connect (OSTI)

    Orr, H.D.; Lemon, G.D.

    1983-01-01T23:59:59.000Z

    The Los Alamos National Laboratory Building Cost Index indicates that actual escalation since 1970 is near 10% per year. Therefore, the Laboratory will continue using a 10% per year escalation rate for construction estimates through 1985 and a slightly lower rate of 8% per year from 1986 through 1990. The computerized program compares the different elements involved in the cost of a typical construction project, which for our purposes, is a complex of office buildings and experimental laboratores. The input data used in the program consist primarily of labor costs and material and equipment costs. The labor costs are the contractural rates of the crafts workers in the Los Alamos area. For the analysis, 12 field-labor draft categories are used; each is weighted corresponding to the labor craft distribution associated with the typical construction project. The materials costs are current Los Alamos prices. Additional information sources include material and equipment quotes obtained through conversations with vendors and from trade publications. The material and equipment items separate into 17 categories for the analysis and are weighted corresponding to the material and equipment distribution associated with the typical construction project. The building cost index is compared to other national building cost indexes.

  12. Los Alamos National Laboratory building cost index

    SciTech Connect (OSTI)

    Orr, H.D.; Lemon, G.D.

    1982-10-01T23:59:59.000Z

    The Los Alamos National Laboratory Building Cost Index indicates that actual escalation since 1970 is near 10% per year. Therefore, the Laboratory will continue using a 10% per year escalation rate for construction estimates through 1985 and a slightly lower rate of 8% per year from 1986 through 1990. The computerized program compares the different elements involved in the cost of a typical construction project, which for our purposes, is a complex of office buildings and experimental laboratories. The input data used in the program consist primarily of labor costs and material and equipment costs. The labor costs are the contractual rates of the crafts workers in the Los Alamos area. For the analysis, 12 field-labor craft categories are used; each is weighted corresponding to the labor craft distribution associated with the typical construction project. The materials costs are current Los Alamos prices. Additional information sources include material and equipment quotes obtained through conversations with vendors and from trade publications. The material and equipment items separate into 17 categories for the analysis and are weighted corresponding to the material and equipment distribution associated with the typical construction project. The building cost index is compared to other national building cost indexes.

  13. Cost Codes and the Work Breakdown Structure

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    The chapter discusses the purpose of the work breakdown structure (WBS) and code of account (COA) cost code system, shows the purpose and fundamental structure of both the WBS and the cost code system, and explains the interface between the two systems.

  14. Hydrogen refueling station costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

    2007-01-01T23:59:59.000Z

    Hydrogen production equipment Puri?er Storage system Compressor Dispenser Additional equipment Installation costshydrogen storage vessels and compressors. 2.4.4. Feedstock costhydrogen equipment costs. Meyers [2] pro- vides an in depth analyses of reformer, compressor, and storage equipment costs.

  15. ''Measuring the Costs of Climate Change Policies''

    SciTech Connect (OSTI)

    Montgomery, W. D.; Smith, A. E.; Biggar, S. L.; Bernstein, P.M.

    2003-05-09T23:59:59.000Z

    Studies of the costs of climate change policies have utilized a variety of measures or metrics for summarizing costs. The leading economic models have utilized GNP, GDP, the ''area under a marginal cost curve,'' the discounted present value of consumption, and a welfare measure taken directly from the utility function of the model's representative agent (the ''Equivalent Variation''). Even when calculated using a single model, these metrics do not necessarily give similar magnitudes of costs or even rank policies consistently. This paper discusses in non-technical terms the economic concepts lying behind each concept, the theoretical basis for expecting each measure to provide a consistent ranking of policies, and the reasons why different measures provide different rankings. It identifies a method of calculating the ''Equivalent Variation'' as theoretically superior to the other cost metrics in ranking policies. When regulators put forward new economic or regulatory policies, there is a need to compare the costs and benefits of these new policies to existing policies and other alternatives to determine which policy is most cost-effective. For command and control policies, it is quite difficult to compute costs, but for more market-based policies, economists have had a great deal of success employing general equilibrium models to assess a policy's costs. Not all cost measures, however, arrive at the same ranking. Furthermore, cost measures can produce contradictory results for a specific policy. These problems make it difficult for a policy-maker to determine the best policy. For a cost measures to be of value, one would like to be confident of two things. First one wants to be sure whether the policy is a winner or loser. Second, one wants to be confident that a measure produces the correct policy ranking. That is, one wants to have confidence in a policy measure's ability to correctly rank policies from most beneficial to most harmful. This paper analyzes empirically these two properties of different costs measures as they pertain to assessing the costs of the carbon abatement policies, especially the Kyoto Protocol, under alternative assumptions about implementation.

  16. The role of high-level calculations in the assignment of the Q-band spectra of chlorophyll

    SciTech Connect (OSTI)

    Reimers, Jeffrey R. [School of Physics and Materials Science, The University of Technology, Sydney NSW (Australia); Cai, Zheng-Li [School of Chemistry, Physics and Mechanical Engineering, Queensland University of Technology, Brisbane QLD4001 (Australia); Kobayashi, Rika [Australian National University Supercomputer Facility, Mills Rd, Canberra, ACT 0200 (Australia); Rštsep, Margus [Institute of Physics, University of Tartu, Riia 142, 51014 Tartu (Estonia); Freiberg, Arvi [Institute of Physics, University of Tartu, Riia 142, 51014 Tartu, Estonia and Institute of Molecular and Cell Biology, University of Tartu, Riia 23, 51010 Tartu (Estonia); Krausz, Elmars [Research School of Chemistry, The Australian National University, Canberra 2601 (Australia)

    2014-10-06T23:59:59.000Z

    We recently established a novel assignment of the visible absorption spectrum of chlorophyll-a that sees the two components Q{sub x} and Q{sub y} of the low-energy Q band as being intrinsically mixed by non-adiabatic coupling. This ended 50 years debate as to the nature of the Q bands, with prior discussion poised only in the language of the Born-Oppenheimer and Condon approximations. The new assignment presents significant ramifications for exciton transport and quantum coherence effects in photosystems. Results from state of the art electronic structure calculations have always been used to justify assignments, but quantitative inaccuracies and systematic failures have historically limited usefulness. We examine the role of CAM-B3LYP time-dependent density-functional theory (TD-DFT) and Symmetry Adapted Cluster-Configuration Interaction (SAC-CI) calculations in first showing that all previous assignments were untenable, in justifying the new assignment, in making some extraordinary predictions that were vindicated by the new assignment, and in then identifying small but significant anomalies in the extensive experimental data record.

  17. Industrial heat pumps: types and costs

    SciTech Connect (OSTI)

    Chappell, R.N.; Bliem, C.J. Jr.; Mills, J.I.; Demuth, O.J.; Plaster, D.S.

    1985-03-01T23:59:59.000Z

    Many potentially beneficial applications for industrial heat pumps are not being pursued because of confusion regarding both energy savings and economics. Part of this confusion stems from the variety of heat pumps available and the fact that the measure of merit, the coefficient of performance (COP), is commonly defined in at least three different ways. In an attempt to circumvent this problem, a simple categorization was developed based on the commonly accepted COP definitions. Using this categorization, the cost of recovering waste energy with heat pumps was examined. Examples were evaluated in which the cost of energy delivered was calculated based on estimates of capital cost, operating costs, and maintenance costs. Heat pumps from the various categories were then compared on the basis of economics.

  18. Industrial heat pumps - types and costs

    SciTech Connect (OSTI)

    Chappell, R.N.; Bliem, C.J. Jr.; Mills, J.I.; Demuth, O.J.; Plaster, D.S.

    1985-01-01T23:59:59.000Z

    Many potentially beneficial applications for industrial heat pumps are not being pursued because of confusion regarding both energy savings and economics. Part of this confusion stems from the variety of heat pumps available and the fact that the measure of merit, the coefficient of performance (COP) is commonly defined in at least three different ways. In an attempt to circumvent this problem, a simple categorization was developed based on the commonly accepted COP definitions. Using this categorization, the cost of recovering waste energy with heat pumps was examined. Examples were evaluated in which the cost of energy delivered was calculated based on estimates of capital cost, operating costs, and maintenance costs. Heat pumps from the various categories were then compared on the basis of economics. 6 refs., 7 figs.

  19. Nuclear plant cancellations: causes, costs, and consequences

    SciTech Connect (OSTI)

    Not Available

    1983-04-01T23:59:59.000Z

    This study was commissioned in order to help quantify the effects of nuclear plant cancellations on the Nation's electricity prices. This report presents a historical overview of nuclear plant cancellations through 1982, the costs associated with those cancellations, and the reasons that the projects were terminated. A survey is presented of the precedents for regulatory treatment of the costs, the specific methods of cost recovery that were adopted, and the impacts of these decisions upon ratepayers, utility stockholders, and taxpayers. Finally, the report identifies a series of other nuclear plants that remain at risk of canellation in the future, principally as a result of similar demand, finance, or regulatory problems cited as causes of cancellation in the past. The costs associated with these potential cancellations are estimated, along with their regional distributions, and likely methods of cost recovery are suggested.

  20. Time-Energy Costs of Quantum Measurements

    E-Print Network [OSTI]

    Chi-Hang Fred Fung; H. F. Chau

    2014-05-08T23:59:59.000Z

    Time and energy of quantum processes are a tradeoff against each other. We propose to ascribe to any given quantum process a time-energy cost to quantify how much computation it performs. Here, we analyze the time-energy costs for general quantum measurements, along a similar line as our previous work for quantum channels, and prove exact and lower bound formulae for the costs. We use these formulae to evaluate the efficiencies of actual measurement implementations. We find that one implementation for a Bell measurement is optimal in time-energy. We also analyze the time-energy cost for unambiguous state discrimination and find evidence that only a finite time-energy cost is needed to distinguish any number of states.

  1. Calculating Wind Integration Costs: Separating Wind Energy Value from Integration Cost Impacts

    SciTech Connect (OSTI)

    Milligan, M.; Kirby, B.

    2009-07-01T23:59:59.000Z

    Accurately calculating integration costs is important so that wind generation can be fairly compared with alternative generation technologies.

  2. Discrete Event Modeling of Algae Cultivation and Harvesting at Commercial Scale: Capital Costs, Operating Costs, and System Bottlenecks

    SciTech Connect (OSTI)

    Lacey, Ph.D, P.E., Ronald E. [Texas A& M University

    2012-07-16T23:59:59.000Z

    Discrete Event Modeling of Algae Cultivation and Harvesting at Commercial Scale: Capital Costs, Operating Costs, and System Bottlenecks

  3. Cost Improvements, Returns to Scale, and Cost Inefficiencies for Real Estate Investment Trusts*

    E-Print Network [OSTI]

    Ahmad, Sajjad

    ) operating efficiencies. We estimate stochastic-frontier, panel-data models specifying a translog cost of the competitive advantage include economies of scale, lower capital costs, and superior sources of capital. Specifying a translog cost function and using 1995 to 2003 data, we estimate a stochastic-frontier panel

  4. Renewable Energy Planning: Multiparametric Cost Optimization; Preprint

    SciTech Connect (OSTI)

    Walker, A.

    2008-05-01T23:59:59.000Z

    This paper describes a method for determining the combination of renewable energy technologies that minimize life-cycle cost at a facility, often with a specified goal regarding percent of energy use from renewable sources. Technologies include: photovoltaics (PV); wind; solar thermal heat and electric; solar ventilation air preheating; solar water heating; biomass heat and electric (combustion, gasification, pyrolysis, anaerobic digestion); and daylighting. The method rests upon the National Renewable Energy Laboratory's (NREL's) capabilities in characterization of technology cost and performance, geographic information systems (GIS) resource assessment, and life-cycle cost analysis. The paper discusses how to account for the way candidate technologies interact with each other, and the solver routine used to determine the combination that minimizes life-cycle cost. Results include optimal sizes of each technology, initial cost, operating cost, and life-cycle cost, including incentives from utilities or governments. Results inform early planning to identify and prioritize projects at a site for subsequent engineering and economic feasibility study.

  5. Costs | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phases on &gamma;-Al2O3. |ID#: 19834Costs Associated WithCosts Costs

  6. Cost implications of feedstock combinations for community sized biodiesel production

    SciTech Connect (OSTI)

    Weber, J.A.; Van Dyne, D.L. [Univ. of Missouri, Columbia, MO (United States)

    1993-12-31T23:59:59.000Z

    Biodiesel can be processed from oilseeds or animal fats and used in unmodified diesel engines. This fuel has been produced commercially in Europe for three years. Research indicates that biodiesel can replace diesel fuel without causing harmful effects to an unmodified engine and can reduce harmful emissions . Some European biodiesel plants operate at the community level effectively supplying both fuel and animal feeds. This study examines multiple feedstocks that could be utilized by a community sized biodiesel plant. The model plant used is a 500,000 gallon processing facility. The model plant is assumed to be installed in an existing grain handling facility or feed mill. Animal fats would be purchased from outside sources and oilseeds would be provided by area producers. Producers would retain ownership of the oilseeds and pay a processing fee to the cooperative. Oilseeds would be extruded before being separated into meal and crude oil. The crude oil would be esterified into biodiesel using continuous flow esterification technology. This study concludes under specific conditions, biodiesel can be processed economically at the community level. The results indicate that without farm program benefits to minor oilseeds, soybeans are the most economic feedstock to use in a community based operation. Realistic price information suggests that biodiesel (from soybeans) could be produced for $1.26 per gallon. If producers participate in government programs and are capable of growing minor oilseeds, canola may represent a better feedstock than soybeans. Achieving the lowest costs of production depends on the value assigned to co-product credits such as oilseed meal. The more producers pay for high protein meal for their livestock and poultry, the lower the residual price of biodiesel.

  7. Calculating the Social Cost of Carbon

    E-Print Network [OSTI]

    Hope, Chris; Newbery, David

    The paper1 discusses the determination of the social cost of carbon (SCC) using the PAGE2002 model used in the Stern Review. The SCC depends sensitively on assumptions about future economic development, the range and likelihood of economic...

  8. Cost and benefit of energy efficient buildings

    E-Print Network [OSTI]

    Zhang, Wenying, S.B. Massachusetts Institute of Technology

    2006-01-01T23:59:59.000Z

    A common misconception among developers and policy-makers is that "sustainable buildings" may not be financially justified. However, this report strives to show that building green is cost-effective and does make financial ...

  9. WVU Personal Rapid Transit Benefit Cost Analysis

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    WVU Personal Rapid Transit Benefit Cost Analysis Morgantown, West Virginia Prepared For: West ......................................................................... 12 Demographic Data Summary techniques suitable for assessing the impact of the WVU Personal Rapid Transit System (PRT) was employed

  10. A low cost high flux solar simulator

    E-Print Network [OSTI]

    Codd, Daniel S.

    A low cost, high flux, large area solar simulator has been designed, built and characterized for the purpose of studying optical melting and light absorption behavior of molten salts. Seven 1500 W metal halide outdoor ...

  11. Cutting Industrial Solar System Costs in Half

    E-Print Network [OSTI]

    Niess, R. C.; Weinstein, A.

    1982-01-01T23:59:59.000Z

    While there are technical, social, environmental and institutional barriers to the widespread use of solar systems, the principle barrier is economic. For commercial and industrial firms to turn to this alternate energy source, the first cost must...

  12. Prediction markets for cost and risk assessment

    E-Print Network [OSTI]

    Aggarwal, Taroon

    2011-01-01T23:59:59.000Z

    Several temporal and political factors can sometimes limit the effectiveness of traditional methods of project tracking and cost estimation. A large organization is susceptible to internal and external risks that are ...

  13. Cost Effective Cooling Strategies for Manufacturing Facilities

    E-Print Network [OSTI]

    Kumar, R.

    there are many similarities. In addition to the above environmental conditions for the process/machines and workers, cost effective design of manufacturing facilities must also address maintainability, sanitation, durability, energy conservation and budgetary...

  14. Dynamic Portfolio Optimization with Transaction Costs: Heuristics ...

    E-Print Network [OSTI]

    2011-02-03T23:59:59.000Z

    Aug 10, 2010 ... With no transaction costs, the optimal investments typically depend on the investor's ... new gradient-based approach for generating penalties that exploits the ..... If the investor has a power utility function, the frictionless model†...

  15. Transaction-Cost Economics: Past and Future

    E-Print Network [OSTI]

    Gibbons, Robert S.

    Oliver Williamson is the founder and chief developer of transaction-cost economics (TCE). In this brief essay, on the occasion of his Nobel Memorial Prize, I offer a partial discussion of Williamson's contributions by first ...

  16. Unaccounted-for gas cost allocation

    SciTech Connect (OSTI)

    Ozenne, D.G. (Univ. of California, Los Angeles, CA (United States))

    1994-02-15T23:59:59.000Z

    As competitive pressures grow, gas utility managers have stepped up their search for ways to ensure that rates remain competitive. This challenge is particularly acute in the large commercial and industrial market segments, which are most typically [open quotes]at risk.[close quotes] A variety of cost-allocation studies have been undertaken to determine more accurately what costs are associated with serving market segments, and which costs should be recovered from each. Because there are clear winners and losers in this process (at least, it is clear who wins and loses in the short term), these reallocations have been hotly debated and fiercely litigated. Any proposed change in allocation must be supported by either compelling logic or empirical evidence. This article suggests a method of reallocating the costs associated with unaccounted-for (UAF) gas volumes, based on results from two studies of the elements contributing to UAF gas.

  17. Hydrogen Refueling Station Costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

    2006-01-01T23:59:59.000Z

    Well-to-wheels analysis of hydrogen based fuel-cell vehicleJP, et al. Distributed Hydrogen Fueling Systems Analysis,ĒYear 2006 UCDóITSóRRó06ó04 Hydrogen Refueling Station Costs

  18. Updating Texas Energy Cost Containment Audit Reports

    E-Print Network [OSTI]

    Burke, T. E.; Heffington, W. M.

    1989-01-01T23:59:59.000Z

    In 1984 and 1986, 35.3 million square feet of state owned buildings were audited to identify cost saving retrofit projects. Originally intended for direct legislative funding or bond sales, funding became available in 1989 through oil overcharge...

  19. Reduce generating costs and eliminate brownouts

    SciTech Connect (OSTI)

    Nogaja, R.; Menezes, M. [Emerson Process Management (United States)

    2007-06-15T23:59:59.000Z

    Improving the manoeuverability of a coal-fired plant to allow it to participate in primary frequency support will reduce generation cost and minimize brownouts. The challenge is to do so without compromising efficiency or emissions. This article describes an approach - activation of stored energy - that is cost-effective and applicable to both greenfield and brownfield installations. It requires a new control philosophy, plus the correct application of new level and flow measurement 'best practices'. 4 refs., 1 tab.

  20. Theories on Auctions with Participation Costs

    E-Print Network [OSTI]

    Cao, Xiaoyong

    2010-01-14T23:59:59.000Z

    THEORIES ON AUCTIONS WITH PARTICIPATION COSTS A Dissertation by XIAOYONG CAO Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY August 2009 Major... Subject: Economics THEORIES ON AUCTIONS WITH PARTICIPATION COSTS A Dissertation by XIAOYONG CAO Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY Approved...

  1. Polypropylene reinvented: Costs of using metallocene catalysts

    SciTech Connect (OSTI)

    Brockmeier, N.F.

    1996-05-01T23:59:59.000Z

    This study develops scoping estimates of the required capital investment and manufacturing costs to make a zirconocene catalyst/cocatalyst system [(F{sub 6}-acen)Zr(CH{sub 2}CMe{sub 3})(NMe{sub 2}Ph)][B(C{sub 6}F{sub 5}){sub 4}] immobilized on a silica support. Costs for this fluorine-based system are compared with estimates for two other metallocene catalysts using methylaluminoxane (MAO)-based cocatalysts. Including wt of support and cocatalyst, each of the production facilities for making the 3 zirconocene catalyst systems is sized at 364--484 tonnes/year. Cost to make the F-based catalyst system is estimated to be $10780/kg, assuming 20% return on capital invested. Costs for the two MAO-based catalyst system fall in the range of $10950--12160/kg, assuming same return. Within the {plus_minus}50% accuracy of these estimates, these differences are not significant. Given a catalyst productivity of 250 kg resin/gram zirconocene, the cost contribution in the finished ethylene-propylene copolymer resin is 4.4 cents/kg, excluding selling, administrative, research costs.

  2. Expanding the role of the cost engineer

    SciTech Connect (OSTI)

    Stutz, R.A.; Shaw, R.F.

    1989-01-01T23:59:59.000Z

    There have been many questions about the costs of providing medical services. These questions have resulted in the development of Resource-Based Relative Values Scale (RBRVS) at the national level. Policymakers view RBRVS as a potential tool to pay physicians. The questions, about the cost of operations of HSE-2 at Los Alamos National Laboratory, revolve around doing routine occupation health physicals for the Laboratory. Generally, these questions are concerned about why the costs appear to be high relative to what private physician suggests the costs should be. There is also an interest in trying to find methods to reduce these costs if possible. Many of the tools developed to help in construction estimating can be applied to estimating medical costs. With the need to perform many thousands of physicals each year the saving of even a few dollars for each exam can quickly add up to a large saving. There are a number of different types of physicals and different levels; based on age, sex, type of work, and years since last physical. The LANL Health Services are housed in a 12,600 square foot building close to the population center of the Laboratory Health Services, produced by a staff of seven physicians and approximately 25 support personnel, include acute medical care, routine surveillance exams, and preventive medicine programs. This paper will consider the routine surveillance exams, which constitute the major activity of the medical staff, in terms of time and dollars expended.

  3. Reformulated gasoline: Costs and refinery impacts

    SciTech Connect (OSTI)

    Hadder, G.R.

    1994-02-01T23:59:59.000Z

    Studies of reformulated gasoline (RFG) costs and refinery impacts have been performed with the Oak Ridge National Laboratory Refinery Yield Model (ORNL-RYM), a linear program which has been updated to blend gasolines to satisfy emissions constraints defined by preliminary complex emissions models. Policy makers may use the reformulation cost knee (the point at which costs start to rise sharply for incremental emissions control) to set emissions reduction targets, giving due consideration to the differences between model representations and actual refining operations. ORNL-RYM estimates that the reformulation cost knee for the US East Coast (PADD I) is about 15.2 cents per gallon with a 30 percent reduction of volatile organic compounds (VOCs). The estimated cost knee for the US Gulf Coast (PADD III) is about 5.5 cents per gallon with a VOC reduction of 35 percent. Reid vapor pressure (RVP) reduction is the dominant VOC reduction mechanism. Even with anti-dumping constraints, conventional gasoline appears to be an important sink which permits RFG to be blended with lower aromatics and sulfur contents in PADD III. In addition to the potentially large sensitivity of RFG production to different emissions models, RFG production is sensitive to the non-exhaust VOC share assumption for a particular VOC model. ORNL-RYM has also been used to estimate the sensitivity of RFG production to the cost of capital; to the RVP requirements for conventional gasoline; and to the percentage of RFG produced in a refining region.

  4. Operating Costs for Trucks David Levinson*, Michael Corbett, Maryam Hashami

    E-Print Network [OSTI]

    Levinson, David M.

    Author Abstract This study estimates the operating costs for commercial vehicle operators in Minnesota, but variable costs change with the level of output. Daniels (1974) divided vehicle operating cost into two different categories, running costs (includes fuel consumption, engine oil consumption, tire costs

  5. REQUEST FOR INDIRECT COST WAIVER I. Project Director

    E-Print Network [OSTI]

    Krovi, Venkat

    REQUEST FOR INDIRECT COST WAIVER I. Project Director: Department: Project Title: Project Sponsor without fully recovering the institutional indirect costs which will be incurred in conducting the project COSTS 1. FULL: OF I. A. C. 2. PARTIAL: OF H. B. K. TOTAL PROJECT COSTS L. INDIRECT COSTS TO BE WAIVED, J

  6. RETI Resource Valuation Methodology Cost of Generation Calculator

    E-Print Network [OSTI]

    ) · Cost of equity investment in capital · Cost of financing capital · Taxes, including investmentRETI Resource Valuation Methodology Cost of Generation Calculator The Cost of Generation Calculator determines the levelized cost of generating power over the life of the resource, and is an input

  7. Past and Future Cost of Wind Energy: Preprint

    SciTech Connect (OSTI)

    Lantz, E.; Hand, M.; Wiser, R.

    2012-08-01T23:59:59.000Z

    The future of wind power will depend on the ability of the industry to continue to achieve cost reductions. To better understand the potential for cost reductions, this report provides a review of historical costs, evaluates near-term market trends, and summarizes the range of projected costs. It also notes potential sources of future cost reductions.

  8. ENVIR 202b Earth, Air Water Winter 2003 Essay 1: assigned: Tues 1/14/03

    E-Print Network [OSTI]

    .htm E2 Lenses and Mirrors #12;2 Solar power is an alternative energy source of potentially great value, including its cost versus its benefit. You may want to concentrate on a particular method, like the `Fresnel/23/03 final by Thurs 1/30/03 The first of our three units, on Energy, has involved experiments on energy

  9. Cost update technology, safety, and costs of decommissioning a reference uranium hexafluoride conversion plant

    SciTech Connect (OSTI)

    Miles, T.L.; Liu, Y.

    1995-08-01T23:59:59.000Z

    The purpose of this study is to update the cost estimates developed in a previous report, NUREG/CR-1757 (Elder 1980) for decommissioning a reference uranium hexafluoride conversion plant from the original mid-1981 dollars to values representative of January 1993. The cost updates were performed by using escalation factors derived from cost index trends over the past 11.5 years. Contemporary price quotes wee used for costs that have increased drastically or for which is is difficult to find a cost trend. No changes were made in the decommissioning procedures or cost element requirements assumed in NUREG/CR-1757. This report includes only information that was changed from NUREG/CR-1757. Thus, for those interested in detailed descriptions and associated information for the reference uranium hexafluoride conversion plant, a copy of NUREG/CR-1757 will be needed.

  10. Assigning unique identification numbers to new user accounts and groups in a computing environment with multiple registries

    DOE Patents [OSTI]

    DeRobertis, Christopher V. (Hopewell Junction, NY); Lu, Yantian T. (Round Rock, TX)

    2010-02-23T23:59:59.000Z

    A method, system, and program storage device for creating a new user account or user group with a unique identification number in a computing environment having multiple user registries is provided. In response to receiving a command to create a new user account or user group, an operating system of a clustered computing environment automatically checks multiple registries configured for the operating system to determine whether a candidate identification number for the new user account or user group has been assigned already to one or more existing user accounts or groups, respectively. The operating system automatically assigns the candidate identification number to the new user account or user group created in a target user registry if the checking indicates that the candidate identification number has not been assigned already to any of the existing user accounts or user groups, respectively.

  11. Cost Sharing Granting agencies may require the University to bear some of the costs of a sponsored project,

    E-Print Network [OSTI]

    Tam, Tin-Yau

    and cost sharing funds should be spent at about the same rate throughout the project: for example, when 10 of project costs will normally be transferred from the grant FOP to the cost sharing FOP. Granting agencies charged to the sponsored FOP or to a cost sharing FOP for that project. Methods of Cost Sharing 1. Cash

  12. Development of a right-of-way cost estimation and cost estimate management process framework for highway projects

    E-Print Network [OSTI]

    Lucas, Matthew Allen

    2009-05-15T23:59:59.000Z

    Escalation of right-of-way (ROW) costs have been shown to be a prime contributor to project cost escalation in the highway industry. Two problems contribute to ROW cost escalation: 1) the ROW cost estimation and cost estimate management process...

  13. Comparative Analysis of the Cost Models Used for Estimating Renovation Costs of Universities in Texas

    E-Print Network [OSTI]

    Faquih, Yaquta Fakhruddin

    2010-10-12T23:59:59.000Z

    the cost of renovation, ease of use and speed of the model are some of the other factors that practitioners look for in a cost model (Yokum and Armstrong. 1995). This research aims to identify the merits and demerits of the cost models based on not only... Researchers believe that accuracy is the main criterion for selecting the best cost model; however, a survey done by Yokum and Armstrong in 1995 shows that ease of interpretation, ease of use, ease in getting data, credibility, and speed top the list...

  14. †Underfloor air distribution (UFAD) cost study: analysis of first cost tradeoffs in UFAD systems

    E-Print Network [OSTI]

    Webster, Tom; Benedek, Corinne; Bauman, Fred

    2006-01-01T23:59:59.000Z

    is served by VAV fan coil units (FCU) with variable speedwith regard to terminal fan coil unit costs. Since the model

  15. Evidence of cost growth under cost-plus and fixed-price contracting

    SciTech Connect (OSTI)

    Scott, M.J.; Paananaen, O.H.; Redgate, T.E.; Ulibarri, C.A.; Jaksch, J.A.

    1998-09-01T23:59:59.000Z

    As defined by the US Department of Energy (DOE), privatization refers to a shifting of responsibilities for the completion of projects from a cost-plus Management and Operations (M and O) contract, to incentive-based contracts with the private sector. DOE`s new vision is to arrange cleanup work around incentives-based contracts, which are won via competitive bidding. Competition in awarding cleanup contracts can make use of market incentives to lower project costs and reduce slippage time. Fixed-price contracts encourage contractors to minimize schedule delays and cost overruns once the scope of a project has been negotiated. Conversely, cost-plus contracting offers weak incentives for contractors to select cost-minimizing production and management approaches. Because privatization explicitly allocates more risk to the contractor, it forces the government to better define its goals and methods. This study summarizes actual cost experiences with government contracts performed under cost-plus and fixed-price incentive structures at all levels of government. The first section provides some background on the problem of making contractor activity more cost-efficient. Following this are sections on the measurement of performance and the costs of projects, limitations on measurement, and findings of similar studies. The study concludes with appendices discussing the details of the performance measurement methodology and the project data sets used in the study.

  16. Selective Reporting and the Social Cost of Carbon

    E-Print Network [OSTI]

    Havranek, Tomas; Irsova, Zuzana; Janda, Karel; Zilberman, David

    2014-01-01T23:59:59.000Z

    estimating the social cost of carbon. meta-analysis.cz/scc.Formula for the Social Cost of Carbon. Ē Working PaperP. Watkiss (2005): ďSocial Cost of Carbon: A Closer Look at

  17. The costs of environmental regulation in a concentrated industry

    E-Print Network [OSTI]

    Ryan, Stephen

    2005-01-01T23:59:59.000Z

    The typical cost analysis of an environmental regulation consists of an engineering estimate of the compliance costs. In industries where fixed costs are an important determinant of market structure this static analysis ...

  18. Development of Low-Cost, High Strength Commercial Textile Precursor...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a project to develop develop a low-cost precursor fiber that can be converted to low-cost carbon fiber (CF) with at least 650 ksi tensile strength. Development of Low-Cost, High...

  19. Including costs of supply chain risk in strategic sourcing decisions

    E-Print Network [OSTI]

    Jain, Avani

    2009-01-01T23:59:59.000Z

    Cost evaluations do not always include the costs associated with risks when organizations make strategic sourcing decisions. This research was conducted to establish and quantify the impact of risks and risk-related costs ...

  20. Improved supplier selection and cost management for globalized automotive production

    E-Print Network [OSTI]

    Franken, Joseph P., II (Joseph Philip)

    2012-01-01T23:59:59.000Z

    For many manufacturing and automotive companies, traditional sourcing decisions rely on total landed cost models to determine the cheapest supplier. Total landed cost models calculate the cost to purchase a part plus all ...

  1. The Costs of Environmental Regulation in a Concentrated Industry

    E-Print Network [OSTI]

    Ryan, Stephen

    The typical cost analysis of an environmental regulation consists of an engineering estimate of the compliance costs. In industries where fixed costs are an important determinant of market structure, this static analysis ...

  2. Societal lifetime cost of hydrogen fuel cell vehicles

    E-Print Network [OSTI]

    Sun, Yongling; Ogden, J; Delucchi, Mark

    2010-01-01T23:59:59.000Z

    upon fuel cell stack performance, catalyst cost, stackin 2025, the fuel cell system cost (stack and BOP) is aboutaffect the cost of fuel cell stack. In a recent report by

  3. Do You Have Adequate Staffing to Keep Costs Under Control?

    E-Print Network [OSTI]

    Mergens, E. H.

    Competitive pressures have forced companies to seek reduced costs through reduced staffing. The emphasis has been on fixed cost control at the expense of some loss in variable cost control. Restructuring through reduced staffing has some pitfalls...

  4. External Costs of Transport in the U.S.

    E-Print Network [OSTI]

    Delucchi, Mark A.; McCubbin, Donald R.

    2010-01-01T23:59:59.000Z

    been quantified. Energy security/oil-importing costs BriefEstimates of energy-security/oil-importing costs by mode (et al. , 2008). Oil-importing ďenergy-securityĒ costs have

  5. Societal lifetime cost of hydrogen fuel cell vehicles

    E-Print Network [OSTI]

    Sun, Yongling; Ogden, J; Delucchi, Mark

    2010-01-01T23:59:59.000Z

    Fuel-cell system cost estimate Fuel cell performance andsignificantly affect the cost of fuel cell stack. In aTo estimate how the costs of fuel-cell system components

  6. Cost-Effective Industrial Boiler Plant Efficiency Advancements

    E-Print Network [OSTI]

    Fiorino, D. P.

    Natural gas and electricity are expensive to the extent that annual fuel and power costs can approach the initial cost of an industrial boiler plant. Within this context, this paper examines several cost-effective efficiency advancements that were...

  7. Determining the lowest-cost hydrogen delivery mode

    E-Print Network [OSTI]

    Yang, Christopher; Ogden, Joan M

    2007-01-01T23:59:59.000Z

    liquid hydrogen pumps cost less than compressors. Further,hydrogen ?ow rate, though there are slight economies of scale associated with compressor cost.hydrogen storage tanks are needed. Costs for central plant compressors

  8. Low-Cost Spectral Sensor Development Description.

    SciTech Connect (OSTI)

    Armijo, Kenneth Miguel; Yellowhair, Julius

    2014-11-01T23:59:59.000Z

    Solar spectral data for all parts of the US is limited due in part to the high cost of commercial spectrometers. Solar spectral information is necessary for accurate photovoltaic (PV) performance forecasting, especially for large utility-scale PV installations. A low-cost solar spectral sensor would address the obstacles and needs. In this report, a novel low-cost, discrete- band sensor device, comprised of five narrow-band sensors, is described. The hardware is comprised of commercial-off-the-shelf components to keep the cost low. Data processing algorithms were developed and are being refined for robustness. PV module short-circuit current ( I sc ) prediction methods were developed based on interaction-terms regression methodology and spectrum reconstruction methodology for computing I sc . The results suggest the computed spectrum using the reconstruction method agreed well with the measured spectrum from the wide-band spectrometer (RMS error of 38.2 W/m 2 -nm). Further analysis of computed I sc found a close correspondence of 0.05 A RMS error. The goal is for ubiquitous adoption of the low-cost spectral sensor in solar PV and other applications such as weather forecasting.

  9. Cost of documenting the NISC project.

    SciTech Connect (OSTI)

    Stutz, R. A. (Roger Alan)

    2003-01-01T23:59:59.000Z

    The project team selected a computer-based approach for the NISC project record management system. The team is convinced that this approach did cut direct costs . The major advantage, that the team believes did help the project, comes in the area of having just one central point for all design and construction information related to the project . The other benefit to the project will come over the thirty-year design life of the project through reduced costs to design changes to the facility . The team estimates that a reasonable saving for the project (including future modifications) will be about $2,OOOK or about 3% of the project construction costs . The cost increase of scanning non-electric documents will decrease for other projects in the future as more project related information is computer generated . Many the subcontractors on the NISC project had not completely converted to computer based systems for there own internal operation during the life of the NISC project. However, as more project related documents are generated in electronic form this type of cost will reduce .

  10. The Cost of Power Disturbances to Industrial & Digital Economy Companies

    E-Print Network [OSTI]

    Schrijver, Karel

    -4: Average Cost Per Outage by Annual kWh and Duration 2-5 Figure 2-5: Average Cost Per Outage for DE by Data-5: Average Annual Per Establishment Cost of Outages by Annual kWh 3-6 Figure 3-6: Aggregate Annual Cost-4: Average Annual Per Establishment Cost of PQ Problems by Annual kWh 4-4 Figure 4-5: Aggregate Annual Cost

  11. Cryo-Compressed Hydrogen Storage: Performance and Cost Review...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Compressed Hydrogen Storage: Performance and Cost Review Cryo-Compressed Hydrogen Storage: Performance and Cost Review Presented at the R&D Strategies for Compressed,...

  12. 2013 Hydrogen Compression, Storage, and Dispensing Cost Reduction...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Compression, Storage, and Dispensing Cost Reduction Workshop Final Report 2013 Hydrogen Compression, Storage, and Dispensing Cost Reduction Workshop Final Report...

  13. Hydrogen Storage in Wind Turbine Towers: Cost Analysis and Conceptual...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Wind Turbine Towers: Cost Analysis and Conceptual Design Hydrogen Storage in Wind Turbine Towers: Cost Analysis and Conceptual Design Preprint 34851.pdf More Documents &...

  14. Energy Department Invests to Drive Down Costs of Carbon Capture...

    Energy Savers [EERE]

    Invests to Drive Down Costs of Carbon Capture, Support Reductions in Greenhouse Gas Pollution Energy Department Invests to Drive Down Costs of Carbon Capture, Support Reductions...

  15. Integrated Design and Manufacturing of Cost-Effective & Industrial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cost-Effective & Industrial-Scalable TEG for Vehicle Applications Integrated Design and Manufacturing of Cost-Effective & Industrial-Scalable TEG for Vehicle Applications...

  16. Cost Effectiveness of Technology Solutions for Future Vehicle...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cost Effectiveness of Technology Solutions for Future Vehicle Systems Cost Effectiveness of Technology Solutions for Future Vehicle Systems Explores the economics of CO2 emission...

  17. A Low-Cost Continuous Emissions Monitoring System for Mobile...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Low-Cost Continuous Emissions Monitoring System for Mobile and Stationary Engine SCRDPF ApplicationsData-Logger for Vehicle Data Acquisition A Low-Cost Continuous Emissions...

  18. The Practice of Cost Benefit Analysis in the Transport Sector...

    Open Energy Info (EERE)

    Practice of Cost Benefit Analysis in the Transport Sector a Mexican Perspective Jump to: navigation, search Tool Summary LAUNCH TOOL Name: The Practice of Cost Benefit Analysis in...

  19. Project Profile: Reducing the Cost of Thermal Energy Storage...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reducing the Cost of Thermal Energy Storage for Parabolic Trough Solar Power Plants Project Profile: Reducing the Cost of Thermal Energy Storage for Parabolic Trough Solar Power...

  20. Development of a Low Cost Ultra Specular Advanced Polymer Film...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Development of a Low Cost Ultra Specular Advanced Polymer Film Solar Reflector Development of a Low Cost Ultra Specular Advanced Polymer Film Solar Reflector This presentation was...

  1. Cost-Competitive Advanced Thermoelectric Generators for Direct...

    Broader source: Energy.gov (indexed) [DOE]

    vehicles by 5% using advanced low cost TE technology: - Low cost materials, modules, heat exchangers, power conditioning, and vehicle integration for exhaust gas waste heat...

  2. Combined Heat and Power System Achieves Millions in Cost Savings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Achieves Millions in Cost Savings at Large University - Case Study, 2013 Combined Heat and Power System Achieves Millions in Cost Savings at Large University - Case Study, 2013...

  3. Development of Cost-Competitive Advanced Thermoelectric Generators...

    Broader source: Energy.gov (indexed) [DOE]

    vehicles by 5% using advanced low cost TE technology: - Low cost materials, modules, heat exchangers, power conditioning, and vehicle integration for exhaust gas waste heat...

  4. Transport Studies Enabling Efficiency Optimization of Cost-Competitive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Studies Enabling Efficiency Optimization of Cost-Competitive Fuel Cell Stacks Transport Studies Enabling Efficiency Optimization of Cost-Competitive Fuel Cell Stacks Presented at...

  5. Treatment Resin Reduces Costs, Materials in Hanford Groundwater...

    Office of Environmental Management (EM)

    Treatment Resin Reduces Costs, Materials in Hanford Groundwater Cleanup - Efficiency delivered more than 6 million in cost savings, 3 million in annual savings Treatment Resin...

  6. Determining the lowest-cost hydrogen delivery mode

    E-Print Network [OSTI]

    Yang, Christopher; Ogden, Joan M

    2007-01-01T23:59:59.000Z

    costs to estimate hydrogen pipeline costs. Davis, CA: ITS-hydrogen trucks, and hydrogen pipelines, were devel- opedFor large amounts of hydrogen, pipeline transmission is pre-

  7. Mass Production Cost Estimation of Direct Hydrogen PEM Fuel Cell...

    Broader source: Energy.gov (indexed) [DOE]

    Mass Production Cost Estimation of Direct Hydrogen PEM Fuel Cell Systems for Transportation Applications: 2012 Update Mass Production Cost Estimation of Direct Hydrogen PEM Fuel...

  8. Societal lifetime cost of hydrogen fuel cell vehicles

    E-Print Network [OSTI]

    Sun, Yongling; Ogden, J; Delucchi, Mark

    2010-01-01T23:59:59.000Z

    Mass Production Cost Estimation for Direct H2 PEM Fuel CellCost Analysis of Fuel Cell Systems for Transportation - Compressed Hydrogen and PEM

  9. Direct Hydrogen PEMFC Manufacturing Cost Estimation for Automotive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Direct Hydrogen PEMFC Manufacturing Cost Estimation for Automotive Applications: Fuel Cell Tech Team Review Direct Hydrogen PEMFC Manufacturing Cost Estimation for Automotive...

  10. High Performance Home Cost Performance Trade-Offs: Production...

    Energy Savers [EERE]

    High Performance Home Cost Performance Trade-Offs: Production Builders - Building America Top Innovation High Performance Home Cost Performance Trade-Offs: Production Builders -...

  11. Renewable, Low-Cost Carbon Fiber for Lightweight Vehicles: Summary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Renewable, Low-Cost Carbon Fiber for Lightweight Vehicles: Summary Report Renewable, Low-Cost Carbon Fiber for Lightweight Vehicles: Summary Report This report outlines the final...

  12. Cost of Gas Adjustment for Gas Utilities (Maine)

    Broader source: Energy.gov [DOE]

    This rule, applicable to gas utilities, establishes rules for calculation of gas cost adjustments, procedures to be followed in establishing gas cost adjustments and refunds, and describes reports...

  13. Extreme Temperature Energy Storage and Generation, for Cost and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Extreme Temperature Energy Storage and Generation, for Cost and Risk Reduction in Geothermal Exploration Extreme Temperature Energy Storage and Generation, for Cost and Risk...

  14. DOE Honors WIPP Representative for Cutting Travel Costs, Greenhouse...

    Energy Savers [EERE]

    DOE Honors WIPP Representative for Cutting Travel Costs, Greenhouse Gas Emissions DOE Honors WIPP Representative for Cutting Travel Costs, Greenhouse Gas Emissions June 29, 2012 -...

  15. Low Cost PM Technology for Particle Reinforced Titanium Automotive...

    Broader source: Energy.gov (indexed) [DOE]

    10 - Low Cost PM Technology for Particle Reinforced Titanium Automotive Components edm2@chrysler.com February 28, 2008 Low Cost PM Technology for Particle Reinforced Titanium...

  16. 3800 Green Series Cost Elements | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    (formerly EPP) Program 3800 Green Series Cost Elements 06112014 (Rev. 7) 3800 Green Series Cost Elements More Documents & Publications 1 OPAM Policy Acquisition Guides...

  17. Advanced High Efficiency Clean Diesel Combustion with Low Cost...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Efficiency Clean Diesel Combustion with Low Cost for Hybrid Engines Advanced High Efficiency Clean Diesel Combustion with Low Cost for Hybrid Engines Clean, in-cylinder combustion...

  18. Low-Cost Packaged CHP System with Reduced Emissions - Presentation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low-Cost Packaged CHP System with Reduced Emissions - Presentation by Cummins Power Generation, June 2011 Low-Cost Packaged CHP System with Reduced Emissions - Presentation by...

  19. Fuel Consumption and Cost Benefits of DOE Vehicle Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Consumption and Cost Benefits of DOE Vehicle Technologies Program Fuel Consumption and Cost Benefits of DOE Vehicle Technologies Program 2012 DOE Hydrogen and Fuel Cells...

  20. The Recovery Act: Cutting Costs and Upping Capacity | Department...

    Broader source: Energy.gov (indexed) [DOE]

    technologies are helping make solar power much more cost-competitive, with significant cost reductions expected between now and 2015. The Recovery Act included more than 5...

  1. The External Damage Cost of Direct Noise From Motor Vehicles

    E-Print Network [OSTI]

    Delucchi, Mark A.; Hsu, Shi-Ling

    1996-01-01T23:59:59.000Z

    is not an external or unaccounted-for cost of highways ifland, then there is an unaccounted- for cost of highway use;

  2. Process for Low Cost Domestic Production of LIB Cathode Materials

    Broader source: Energy.gov (indexed) [DOE]

    - EV) Use BASF's existing assets and low cost production process. Validate that cost and quality targets are met via coin cells, pouch cells and 18650 cells. ...

  3. Technical Cost Modeling - Life Cycle Analysis Basis for Program...

    Broader source: Energy.gov (indexed) [DOE]

    for reduced cost of lightweight materials while meeting national objectives for improved fuel economy * Specific technology improvements affecting major cost drivers detrimental...

  4. Hydrogen Supply: Cost Estimate for Hydrogen Pathways-Scoping...

    Broader source: Energy.gov (indexed) [DOE]

    Supply: Cost Estimate for Hydrogen Pathways-Scoping Analysis. January 22, 2002-July 22, 2002 Hydrogen Supply: Cost Estimate for Hydrogen Pathways-Scoping Analysis. January 22,...

  5. High Performance Without Increased Cost: Urbane Homes, Louisville...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High Performance Without Increased Cost: Urbane Homes, Louisville, KY - Building America Top Innovation High Performance Without Increased Cost: Urbane Homes, Louisville, KY -...

  6. Best Practices for Controlling Capital Costs in Net Zero Energy...

    Energy Savers [EERE]

    Best Practices for Controlling Capital Costs in Net Zero Energy Design and Construction - 2014 BTO Peer Review Best Practices for Controlling Capital Costs in Net Zero Energy...

  7. Determining the Lowest-Cost Hydrogen Delivery Mode

    E-Print Network [OSTI]

    Yang, Christopher; Ogden, Joan M

    2008-01-01T23:59:59.000Z

    liquid hydrogen pumps cost less than compressors. Further,hydrogen flow rate, though there are slight economies of scale associated with compressor cost.

  8. Process-Based Cost Modeling to Support Target Value Design

    E-Print Network [OSTI]

    Nguyen, Hung Viet

    2010-01-01T23:59:59.000Z

    Costing as a Tool for Process Improvement Evaluation. ĒA. (2005). ďDetermination of Process Durations on VirtualR.G. (1987). ďCost Modeling: a Process-Modeling ApproachĒ.

  9. New Process for Producing Styrene Cuts Costs, Saves Energy, and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Process for Producing Styrene Cuts Costs, Saves Energy, and Reduces Greenhouse Gas Emissions New Process for Producing Styrene Cuts Costs, Saves Energy, and Reduces Greenhouse Gas...

  10. Waste Management Facilities Cost Information Report

    SciTech Connect (OSTI)

    Feizollahi, F.; Shropshire, D.

    1992-10-01T23:59:59.000Z

    The Waste Management Facility Cost Information (WMFCI) Report, commissioned by the US Department of Energy (DOE), develops planning life-cycle cost (PLCC) estimates for treatment, storage, and disposal facilities. This report contains PLCC estimates versus capacity for 26 different facility cost modules. A procedure to guide DOE and its contractor personnel in the use of estimating data is also provided. Estimates in the report apply to five distinctive waste streams: low-level waste, low-level mixed waste, alpha contaminated low-level waste, alpha contaminated low-level mixed waste, and transuranic waste. The report addresses five different treatment types: incineration, metal/melting and recovery, shredder/compaction, solidification, and vitrification. Data in this report allows the user to develop PLCC estimates for various waste management options.

  11. Historical and projected costs of natural disasters

    SciTech Connect (OSTI)

    Engi, D.

    1995-04-01T23:59:59.000Z

    Natural disasters cause billions of dollars of damage and thousands Of deaths globally each year. While the magnitude is clear, the exact costs (in damage and fatalities) are difficult to clearly identify. This document reports on the results of a survey of data on the costs associated with significant natural disasters. There is an impressive amount of work and effort going into natural disaster research, mitigation, and relief. However, despite this effort, there are surprisingly few consistent and reliable data available regarding the effects of natural disasters. Even lacking consistent and complete data, it is clear that the damage and fatalities from natural disasters are increasing, both in the United States, and globally. Projections using the available data suggest that, in the United States alone, the costs of natural disasters between 1995 and 2010 will be in the range of $90 billion (94$) and 5000 lives.

  12. EECE 577 Assignment 2 Due date: October 20, at the beginning of class.

    E-Print Network [OSTI]

    Pulfrey, David L.

    investigated for use in low-cost, thin-film solar cells (see, for example, Nanosolar's web-site). CIGS can be p on the course web-site in the file Spectrum.txt. The wavelength is in column 1 and the irradiance is in column 3. Perform a calculation of the dark current for the cell, justifying the equations and para- meter values

  13. A Program for Optimizing SRF Linac Costs

    SciTech Connect (OSTI)

    Powers, Thomas J. [JLAB

    2013-04-01T23:59:59.000Z

    Every well-designed machine goes through the process of cost optimization several times during its design, production and operation. The initial optimizations are done during the early proposal stage of the project when none of the systems have been engineered. When a superconducting radio frequency (SRF) linac is implemented as part of the design, it is often a difficult decision as to the frequency and gradient that will be used. Frequently, such choices are made based on existing designs, which invariably necessitate moderate to substantial modifications so that they can be used in the new accelerator. Thus the fallacy of using existing designs is that they will frequently provide a higher cost machine or a machine with sub-optimal beam physics parameters. This paper describes preliminary results of a new software tool that allows one to vary parameters and understand the effects on the optimized costs of construction plus 10 year operations of an SRF linac, the associated cryogenic facility, and controls, where operations includes the cost of the electrical utilities but not the labor or other costs. It derives from collaborative work done with staff from Accelerator Science and Technology Centre, Daresbury, UK [1] several years ago while they were in the process of developing a conceptual design for the New Light Source project. The initial goal was to convert a spread sheet format to a graphical interface to allow the ability to sweep different parameter sets. The tools also allow one to compare the cost of the different facets of the machine design and operations so as to better understand the tradeoffs.

  14. New fuel injector design lowers cost

    SciTech Connect (OSTI)

    De Grace, L.G.; Bata, G.T.

    1985-03-01T23:59:59.000Z

    This article describes the Bendix Deka injector series. Bendix engineers have been striving to lessen costs of all portions of the injection equipment, especially single and multipoint injectors. Results of these efforts are advanced, thin-edged orifice and floating unitized armature designs. External configurations of both multipoint and single point Bendix Deka injectors are such that they can directly replace existing products. Both injector types are designed to be able to deliver any calibration within the currently-known requirements. Flow tolerances for Deka injectors match all known requirements, representing a good economic balance between performance and cost. Materials were carefully chosen for wear and corrosion resistance.

  15. Expenses as a component of inventory cost

    E-Print Network [OSTI]

    Lott, Eugene H

    2012-06-07T23:59:59.000Z

    in Inventories", :esearch Series No. 10, National Association of' Cost Accountants Bulletin, August l~p. llVC pp. &5~594. aith manufacturing . 'hese practices can be summarised as 1'oil ovs c Bh . 8'. R Ol G JMI'All:A~ 5o salar1es of corporate officials o.... Payz'oil tax expense may be included in manufacturing expense and made a part of inventory or included in genez al expense and treated as a pez1od, charge Theoretically, payroll taxes repre- sent an additional cost of labor, However, the addition...

  16. Construction Costs of Six Landfill Cover Designs

    SciTech Connect (OSTI)

    Dwyer, S.F.

    1998-12-23T23:59:59.000Z

    A large-scale field demonstration comparing and contrasting final landfill cover designs has been constructed and is currently being monitored. Four alternative cover designs and two conventional designs (a RCRA Subtitle `D' Soil Cover and a RCRA Subtitle `C' Compacted Clay Cover) were constructed side-by-side for direct comparison. The demonstration is intended to evaluate the various cover designs based on their respective water balance performance, ease and reliability of construction, and cost. This paper provides an overview of the construction costs of each cover design.

  17. Cost comparisons of alternative landfill final covers

    SciTech Connect (OSTI)

    Dwyer, S.F.

    1997-02-01T23:59:59.000Z

    A large-scale field demonstration comparing and contrasting final landfill cover designs has been constructed and is currently being monitored. Four alternative cover designs and two conventional designs (a RCRA Subtitle ``D`` Soil Cover and a RCRA Subtitle ``C`` Compacted Clay Cover) were constructed of uniform size, side-by-side. The demonstration is intended to evaluate the various cover designs based on their respective water balance performance, ease and reliability of construction, and cost. This paper provides an overview of the construction costs of each cover design.

  18. 2011 Cost of Wind Energy Review

    SciTech Connect (OSTI)

    Tegen, S.; Lantz, E.; Hand, M.; Maples, B.; Smith, A.; Schwabe, P.

    2013-03-01T23:59:59.000Z

    This report describes the levelized cost of energy (LCOE) for a typical land-based wind turbine installed in the United States in 2011, as well as the modeled LCOE for a fixed-bottom offshore wind turbine installed in the United States in 2011. Each of the four major components of the LCOE equation are explained in detail, such as installed capital cost, annual energy production, annual operating expenses, and financing, and including sensitivity ranges that show how each component can affect LCOE. These LCOE calculations are used for planning and other purposes by the U.S. Department of Energy's Wind Program.

  19. Transportation Cost and Benefit Analysis Congestion Costs Victoria Transport Policy Institute (www.vtpi.org)

    E-Print Network [OSTI]

    O'Donnell, Tom

    Transportation Cost and Benefit Analysis ­ Congestion Costs Victoria Transport Policy Institute congestion is considered one of the most significant transportation problems. The capacity of a road depends, Fundamentals of Traffic Engineering, 13th Edition, Institute of Transportation Studies, UBC (Berkeley; www

  20. EXECUTIVE SUMMARY: RETHINKING STANDBY & FIXED COST CHARGES REGULATORY & RATE DESIGN PATHWAYS TO DEEPER SOLAR PV COST

    E-Print Network [OSTI]

    to be recovered through variable, volume-based charges per kilowatt-hour (kWh). At the same time, however, someEXECUTIVE SUMMARY: RETHINKING STANDBY & FIXED COST CHARGES REGULATORY & RATE DESIGN PATHWAYS TO DEEPER SOLAR PV COST REDUCTIONS The Current Terrain In recent years, electric utilities have experienced

  1. Biodiesel: Cost and reactant comparison 1 Biodiesel: Cost and reactant comparison

    E-Print Network [OSTI]

    Biodiesel: Cost and reactant comparison 1 Biodiesel: Cost and reactant comparison Burke Anderson-2008 Abstract: Alternative fuel resources such as biodiesel are important to combat fossil fuel use reduction. Biodiesel is made through a process of transesterification that can be preformed in a variety

  2. Cost Estimating for Decommissioning of a Plutonium Facility--Lessons Learned From The Rocky Flats Building 771 Project

    SciTech Connect (OSTI)

    Stevens, J. L.; Titus, R.; Sanford, P. C.

    2002-02-26T23:59:59.000Z

    The Rocky Flats Closure Site is implementing an aggressive approach in an attempt to complete Site closure by 2006. The replanning effort to meet this goal required that the life-cycle decommissioning effort for the Site and for the major individual facilities be reexamined in detail. As part of the overall effort, the cost estimate for the Building 771 decommissioning project was revised to incorporate both actual cost data from a recently-completed similar project and detailed planning for all activities. This paper provides a brief overview of the replanning process and the original estimate, and then discusses the modifications to that estimate to reflect new data, methods, and planning rigor. It provides the new work breakdown structure and discusses the reasons for the final arrangement chosen. It follows with the process used to assign scope, cost, and schedule elements within the new structure, and development of the new code of accounts. Finally, it describes the project control methodology used to track the project, and provides lessons learned on cost tracking in the decommissioning environment.

  3. GASIFICATION PLANT COST AND PERFORMANCE OPTIMIZATION

    SciTech Connect (OSTI)

    Samuel S. Tam

    2002-05-01T23:59:59.000Z

    The goal of this series of design and estimating efforts was to start from the as-built design and actual operating data from the DOE sponsored Wabash River Coal Gasification Repowering Project and to develop optimized designs for several coal and petroleum coke IGCC power and coproduction projects. First, the team developed a design for a grass-roots plant equivalent to the Wabash River Coal Gasification Repowering Project to provide a starting point and a detailed mid-year 2000 cost estimate based on the actual as-built plant design and subsequent modifications (Subtask 1.1). This unoptimized plant has a thermal efficiency of 38.3% (HHV) and a mid-year 2000 EPC cost of 1,681 $/kW. This design was enlarged and modified to become a Petroleum Coke IGCC Coproduction Plant (Subtask 1.2) that produces hydrogen, industrial grade steam, and fuel gas for an adjacent Gulf Coast petroleum refinery in addition to export power. A structured Value Improving Practices (VIP) approach was applied to reduce costs and improve performance. The base case (Subtask 1.3) Optimized Petroleum Coke IGCC Coproduction Plant increased the power output by 16% and reduced the plant cost by 23%. The study looked at several options for gasifier sparing to enhance availability. Subtask 1.9 produced a detailed report on this availability analyses study. The Subtask 1.3 Next Plant, which retains the preferred spare gasification train approach, only reduced the cost by about 21%, but it has the highest availability (94.6%) and produces power at 30 $/MW-hr (at a 12% ROI). Thus, such a coke-fueled IGCC coproduction plant could fill a near term niche market. In all cases, the emissions performance of these plants is superior to the Wabash River project. Subtasks 1.5A and B developed designs for single-train coal and coke-fueled power plants. This side-by-side comparison of these plants, which contain the Subtask 1.3 VIP enhancements, showed their similarity both in design and cost (1,318 $/kW for the coal plant and 1,260 $/kW for the coke plant). Therefore, in the near term, a coke IGCC power plant could penetrate the market and provide a foundation for future coal-fueled facilities. Subtask 1.6 generated a design, cost estimate and economics for a multiple train coal-fueled IGCC powerplant, also based on the Subtaks 1.3 cases. The Subtask 1.6 four gasification train plant has a thermal efficiency of 40.6% (HHV) and cost 1,066 $/kW. The single-train advanced Subtask 1.4 plant, which uses an advanced ''G/H-class'' combustion turbine, can have a thermal efficiency of 45.4% (HHV) and a plant cost of 1,096 $/kW. Multi-train plants will further reduce the cost. Again, all these plants have superior emissions performance. Subtask 1.7 developed an optimized design for a coal to hydrogen plant. At current natural gas prices, this facility is not competitive with hydrogen produced from natural gas. The preferred scenario is to coproduce hydrogen in a plant similar to Subtask 1.3, as described above. Subtask 1.8 evaluated the potential merits of warm gas cleanup technology. This study showed that selective catalytic oxidation of hydrogen sulfide (SCOHS) is promising. As gasification technology matures, SCOHS and other improvements identified in this study will lead to further cost reductions and efficiency improvements.

  4. Assigning a Value to Dried Distillers' Grains as a Protein Supplement in Cattle Consuming Low-Quality Forage

    E-Print Network [OSTI]

    Rambo, Zachary Joseph

    2011-08-08T23:59:59.000Z

    Cattle consuming low-quality forage may have decreased forage organic matter intake as a result of decreased nitrogen (N) intake. To date, a value has not been assigned to dried distillers' grains as a protein supplement to cattle consuming low...

  5. lysozyme in the complex were assigned by using a 15 N-edited three-dimensional nuclear

    E-Print Network [OSTI]

    Miller, Webb

    lysozyme in the complex were assigned by using a 15 N-edited three-dimensional nuclear O® verhauser. 9, 308≠315 (2002). 12. Schenk, D. Amyloid-beta immunotherapy for Alzheimer's disease: the end fibril formation in vitro. Biochemistry 31, 8654≠8660 (1992). 18. Morozova-Roche, L. A. et al. Amyloid

  6. ITCS 4121/5121 Contest Assignment 1 Datasets: Four multiple datasets have been uploaded into the course Blackboard.

    E-Print Network [OSTI]

    Yang, Jing

    ITCS 4121/5121 Contest Assignment 1 Datasets: Four multiple datasets have been uploaded into the course Blackboard. Download the datasets and select one from them to be your target dataset. Visualization: The four datasets are closely related to our daily life. What to you want to do with your target

  7. ITCS 4121/5121 Contest Assignment 1 Datasets: Select one dataset I provided for HW 1 as your target dataset.

    E-Print Network [OSTI]

    Yang, Jing

    ITCS 4121/5121 Contest Assignment 1 Datasets: Select one dataset I provided for HW 1 as your target dataset. Visualization: The four datasets are closely related to our daily life. What to you want to do with your target dataset? Try to find one or more tasks. For example, you may want to find the best cereal

  8. ACADEMIC INTERESTS We will do our best to assign a faculty advisor with whom you share an academic interest. Please

    E-Print Network [OSTI]

    Royer, Dana

    1 ACADEMIC INTERESTS We will do our best to assign a faculty advisor with whom you share the questions below so that we can create a good match between you and your faculty advisor. The information you provide will also be shared with your faculty advisor to assist him or her in working with you. 1. Some

  9. CS 312 Problem Set 6: -Shark (CTF) Assigned: April 15, 2004 Due: 11:59PM, May 6, 2004

    E-Print Network [OSTI]

    Myers, Andrew C.

    CS 312 Problem Set 6: -Shark (CTF) Assigned: April 15, 2004 Due: 11:59PM, May 6, 2004 Design review your project group to use the RCL interpreter you wrote in PS5 to build a robotic battle capture and design review omitted here) 1 In honor of the lambda calculus, a predecessor to ML and other functional

  10. Engi 9614: Renewable Energy and Resource Conservation, Assignment #2, Nov. 28th "Opportunities and challenges for a sustainable energy future"

    E-Print Network [OSTI]

    Coles, Cynthia

    Engi 9614: Renewable Energy and Resource Conservation, Assignment #2, Nov. 28th 2013 that will promote research into new renewable energy options or improvements to existing renewable energy plants, and put in place financial incentives for the use and development of clean energy. They recommend

  11. Preprint accepted for publication in Computers and Education Computer-Assisted Assignments in a Large Physics Class

    E-Print Network [OSTI]

    1 Preprint accepted for publication in Computers and Education Computer-Assisted Assignments interactivecontact with the students. 1. Introduction The use of computers in education is very widespread was electricity magnetism, optics and modern physics as the second part of the introductory physics sequence

  12. A Construction of Quantum Stabilizer Codes Based on Syndrome Assignment by Classical Parity-Check Matrices

    E-Print Network [OSTI]

    Ching-Yi Lai; Chung-Chin Lu

    2007-12-02T23:59:59.000Z

    In quantum coding theory, stabilizer codes are probably the most important class of quantum codes. They are regarded as the quantum analogue of the classical linear codes and the properties of stabilizer codes have been carefully studied in the literature. In this paper, a new but simple construction of stabilizer codes is proposed based on syndrome assignment by classical parity-check matrices. This method reduces the construction of quantum stabilizer codes to the construction of classical parity-check matrices that satisfy a specific commutative condition. The quantum stabilizer codes from this construction have a larger set of correctable error operators than expected. Its (asymptotic) coding efficiency is comparable to that of CSS codes. A class of quantum Reed-Muller codes is constructed, which have a larger set of correctable error operators than that of the quantum Reed-Muller codes developed previously in the literature. Quantum stabilizer codes inspired by classical quadratic residue codes are also constructed and some of which are optimal in terms of their coding parameters.

  13. Research Summary Estimating Woodfuel Resource Cost Curves

    E-Print Network [OSTI]

    Research Summary Estimating Woodfuel Resource Cost Curves As a renewable energy source, woodfuel and extraction methods. Background Just under half of the final energy consumed in the UK (49%) is in the form working slope for the chosen type of machinery) and soil conditions (risk of soil damage). Note

  14. COST 526 Project CH4 Final Report

    E-Print Network [OSTI]

    1 COST 526 ­ Project CH4 Final Report Modelling, Simulating and Analysing EQ-Casting and Quenching. Remark: Due to the delay of the funding of the proposed investment casting project we change the focus of the project. The development of an Open Source optimization tool (see collaboration) was a relevant

  15. Regulatory treatment of allowances and compliance costs

    SciTech Connect (OSTI)

    Rose, K. [National Regulatory Research Institute, Columbus, OH (United States)

    1993-07-01T23:59:59.000Z

    The Clean Air Act Amendments of 1990 (CAAA) established a national emission allowance trading system, a market-based form of environmental regulation designed to reduce and limit sulfur dioxide emissions. However, the allowance trading system is being applied primarily to an economically regulated electric utility industry. The combining of the new form of environmental regulation and economic regulation of electric utilities has raised a number of questions including what the role should be of the federal and state utility regulating commissions and how those actions will affect the decision making process of the utilities and the allowance market. There are several dimensions to the regulatory problems that commissions face. Allowances and utility compliance expenditures have implications for least-cost/IPR (integrated resource planning), prudence review procedures, holding company and multistate utility regulation and ratemaking treatment. The focus of this paper is on the ratemaking treatment. The following topics are covered: ratemaking treatment of allowances and compliance costs; Traditional cost-recovery mechanisms; limitations to the traditional approach; traditional approach and the allowance trading market; market-based cost recovery mechanisms; methods of determining the benchmark; determining the split between ratepayers and the utility; other regulatory approaches; limitations of incentive mechanisms.

  16. GLOBAL LUMBER/SAWNWOOD COST BENCHMARKING REPORT

    E-Print Network [OSTI]

    & Trends 3.2 Global Log Harvest Outlook 3.2.1 Log Price Outlook 3.3 Plantation Pine Log Harvest Outlook 3, FEATURING: Industry Overviews by Country Historical Timber Harvest and Lumber Production Historical Lumber/Log Exports (and By Destination) Manufacturing and Log Costs/Prices for Selected Countries SAWN WOOD

  17. Hidden Costs of Energy Chris Field

    E-Print Network [OSTI]

    Kammen, Daniel M.

    #12;What are the real costs of energy? · Unpriced components · Production · Distribution · Consumption2 fertilization #12;Electricity #12;#12;Injuries #12;#12;#12;#12;Other electricity · Nuclear · Wind in Africa · Regression analysis: T & P vs conflict ­ 100 deaths in a year, at least one government ­Range

  18. The Social Cost of Intercity Transportation

    E-Print Network [OSTI]

    Levinson, David M.

    ,409 39,972 7,918 Total All Sources 18,536 60,863 19,890 #12;Air Pollution: Valuation Local Health Costs External to User (not necessarily to system) Result: Noise, Air Pollution, Congestion, Accidents Not: Water Pollution, Parking, Defense ... #12;Approach Air Highway Noise Air Pollution Congestion

  19. Facilities Cost Pool: Maintenance Service Responsibilities

    E-Print Network [OSTI]

    Gulliver, Robert

    C 16 EXTERIOR LANDSCAPING University Standard FM FM C 17 EXTERIOR STD BUILDING SIGNS FM FM FM FM FMD 22 DATA POINT MONITORING Environmental building standard FM FM C Cost Pool: Maintenance Service Responsibilities 2 Table of Contents 3 Building Shell

  20. Eliminating costly data centres The Features

    E-Print Network [OSTI]

    Heiser, Gernot

    to save energy. The Benefits · Dramatic reduction in energy consumption · Reduced cost to service the energy consumption of their electronic goods. Therefore any service delivery platform has to take imagination to impact At a Glance TEMPO seeks to dramatically reduce the energy consumption required

  1. COST 4138/10 1 European Cooperation

    E-Print Network [OSTI]

    : Pathway Evaluation and pest Risk Management In Transport - PERMIT Delegations will find attached AND PEST RISK MANAGEMENT IN TRANSPORT - PERMIT The Parties to this Memorandum of Understanding, declaring. The COST Action PERMIT addresses this shortfall in knowledge and practice and will focus on reducing

  2. Texas Dual Language Program Cost Analysis

    E-Print Network [OSTI]

    Lara-Alecio, Rafael; Galloway, Martha; Mahadevan, Lakshmi; Mason, Ben; Irby, Beverly J.; Brown, Genevieve; Gůmez, Leo

    2010-09-29T23:59:59.000Z

    .......................................................................................................... 4 Texas Dual Language Program Cost Analysis............................................................... 8 Literature Review ............................................................................................................. 8 English... inclusivity, dual language (DL) programs (sometimes referred to as two-way immersion) have seen a rapid increase in Texas and the nation, however, an extensive review of literature indicated that no national or state-wide studies have addressed the issue...

  3. Life Cycle Cost Housing Need and Sustainability

    E-Print Network [OSTI]

    Life Cycle Cost Housing Need and Sustainability Abstract: Jordan is actually facing a rapid urban became difficult to sustain especially concerning the slum areas and the environmental pollution due which could contribute to increase the productivity and sustainability taking into consideration

  4. Integrating economic costs into conservation planning

    E-Print Network [OSTI]

    Vermont, University of

    biodiversity losses, ecologists and conservation biologists have focused on how conservation plans affectIntegrating economic costs into conservation planning Robin Naidoo1 , Andrew Balmford2 , Paul J. Ferraro3 , Stephen Polasky4 , Taylor H. Ricketts1 and Mathieu Rouget5 1 Conservation Science Program, WWF

  5. Vehicle operating costs: evidence from developing countries

    SciTech Connect (OSTI)

    Chesher, A.; Harrison, R.

    1987-01-01T23:59:59.000Z

    The document presents information concerning the relationships between vehicle operating costs and highway conditions derived from four studies performed in Kenya, the Caribbean, Brazil, and India in the 1970s and early 1980s. The levels of transport costs and the amounts by which they are altered when highway conditions change depend on two main factors. The first is the production technology facing firms, in particular, the types and designs of vehicles to which firms have access. The second is the economic environment that firms face, in particular, relative prices of inputs to the production of transportation, such as fuel, tires, labor, and vehicles, and the nature of the transport markets that firms serve. The first part of the book sets out an economic model of firms managing vehicle fleets within which these influences can be examined. The second part of the book reports and interprets the results of the four major research projects which were designed to study the influences on vehicle operating costs. The third part of the book examines total vehicle operating costs.

  6. Extending Quality Management to Utility Costs

    E-Print Network [OSTI]

    Holmes, W. A.

    By installing permanent instrumentation and linking it to the appropriate software, a Utility Cost Management Information System, can be created which will identify where, when and how energy is used in a facility on a dynamic and real-time basis...

  7. Low-Cost Illumination-Grade LEDs

    SciTech Connect (OSTI)

    Epler, John

    2013-08-31T23:59:59.000Z

    Solid State Lighting is a cost-effective, energy-conserving technology serving a rapidly expand- ing multi-billion dollar market. This program was designed to accelerate this lighting revolution by reducing the manufacturing cost of Illumination-Grade LEDs. The technical strategy was to investigate growth substrate alternatives to standard planar sapphire, select the most effective and compatible option, and demonstrate a significant increase in Lumen/$ with a marketable LED. The most obvious alternate substrate, silicon, was extensively studied in the first two years of the program. The superior thermal and mechanical properties of Si were expected to improve wavelength uniformity and hence color yield in the manufacture of high-power illumination- grade LEDs. However, improvements in efficiency and epitaxy uniformity on standard c-plane sapphire diminished the advantages of switching to Si. Furthermore, the cost of sapphire decreased significantly and the cost of processing Si devices using our thin film process was higher than expected. We concluded that GaN on Si was a viable technology but not a practical option for Philips Lumileds. Therefore in 2012 and 2013, we sought and received amendments which broadened the scope to include other substrates and extended the time of execution. Proprietary engineered substrates, off-axis (non-c-plane) sapphire, and c-plane patterned sapphire substrates (PSS) were all investigated in the final 18 months of this program. Excellent epitaxy quality was achieved on all three candidates; however we eliminated engineered substrates and non-c-plane sapphire because of their higher combined cost of substrate, device fabrication and packaging. Ultimately, by fabricating a flip-chip (FC) LED based upon c-plane PSS we attained a 42% reduction in LED manufacturing cost relative to our LUXEON Rebel product (Q1-2012). Combined with a flux gain from 85 to 102 Lm, the LUXEON Q delivered a 210% increase in Lm/$ over this time period. The technology was commercialized in our LUXEON Q product in Sept., 2013. Also, the retention of the sapphire increased the robustness of the device, enabling sales of low-cost submount-free chips to lighting manufacturers. Thus, blue LED die sales were initiated in the form of a PSS-FC in February, 2013.

  8. Processing Cost Analysis for Biomass Feedstocks

    SciTech Connect (OSTI)

    Badger, P.C.

    2002-11-20T23:59:59.000Z

    The receiving, handling, storing, and processing of woody biomass feedstocks is an overlooked component of biopower systems. The purpose of this study was twofold: (1) to identify and characterize all the receiving, handling, storing, and processing steps required to make woody biomass feedstocks suitable for use in direct combustion and gasification applications, including small modular biopower (SMB) systems, and (2) to estimate the capital and operating costs at each step. Since biopower applications can be varied, a number of conversion systems and feedstocks required evaluation. In addition to limiting this study to woody biomass feedstocks, the boundaries of this study were from the power plant gate to the feedstock entry point into the conversion device. Although some power plants are sited at a source of wood waste fuel, it was assumed for this study that all wood waste would be brought to the power plant site. This study was also confined to the following three feedstocks (1) forest residues, (2) industrial mill residues, and (3) urban wood residues. Additionally, the study was confined to grate, suspension, and fluidized bed direct combustion systems; gasification systems; and SMB conversion systems. Since scale can play an important role in types of equipment, operational requirements, and capital and operational costs, this study examined these factors for the following direct combustion and gasification system size ranges: 50, 20, 5, and 1 MWe. The scope of the study also included: Specific operational issues associated with specific feedstocks (e.g., bark and problems with bridging); Opportunities for reducing handling, storage, and processing costs; How environmental restrictions can affect handling and processing costs (e.g., noise, commingling of treated wood or non-wood materials, emissions, and runoff); and Feedstock quality issues and/or requirements (e.g., moisture, particle size, presence of non-wood materials). The study found that over the years the industry has shown a good deal of ingenuity and, as a result, has developed several cost effective methods of processing and handling wood. SMB systems usually cannot afford to perform much onsite processing and therefore usually purchase fuels processed to specification. Owners of larger systems try to minimize onsite processing to minimize processing costs. Whole truck dumpers are expensive, but allow for faster and easier unloading, which reduces labor costs and charges by the haulers. Storage costs are a major factor in overall costs, thus the amount of fuel reserve is an important consideration. Silos and bins are relatively expensive compared to open piles used for larger facilities, but may be required depending on space available, wood characteristics, and amount of wood to be stored. For larger systems, a front-end loader has a lot of flexibility in use and is an essential piece of equipment for moving material. Few opportunities appear to exist for improving the cost effectiveness of these systems.

  9. Combined Waste Form Cost Trade Study

    SciTech Connect (OSTI)

    Dirk Gombert; Steve Piet; Timothy Trickel; Joe Carter; John Vienna; Bill Ebert; Gretchen Matthern

    2008-11-01T23:59:59.000Z

    A new generation of aqueous nuclear fuel reprocessing, now in development under the auspices of the DOE Office of Nuclear Energy (NE), separates fuel into several fractions, thereby partitioning the wastes into groups of common chemistry. This technology advance enables development of waste management strategies that were not conceivable with simple PUREX reprocessing. Conventional wisdom suggests minimizing high level waste (HLW) volume is desirable, but logical extrapolation of this concept suggests that at some point the cost of reducing volume further will reach a point of diminishing return and may cease to be cost-effective. This report summarizes an evaluation considering three groupings of wastes in terms of cost-benefit for the reprocessing system. Internationally, the typical waste form for HLW from the PUREX process is borosilicate glass containing waste elements as oxides. Unfortunately several fission products (primarily Mo and the noble metals Ru, Rh, Pd) have limited solubility in glass, yielding relatively low waste loading, producing more glass, and greater disposal costs. Advanced separations allow matching the waste form to waste stream chemistry, allowing the disposal system to achieve more optimum waste loading with improved performance. Metals can be segregated from oxides and each can be stabilized in forms to minimize the HLW volume for repository disposal. Thus, a more efficient waste management system making the most effective use of advanced waste forms and disposal design for each waste is enabled by advanced separations and how the waste streams are combined. This trade-study was designed to juxtapose a combined waste form baseline waste treatment scheme with two options and to evaluate the cost-benefit using available data from the conceptual design studies supported by DOE-NE.

  10. LOW COST HEAT PUMP WATER HEATER (HPWH)

    SciTech Connect (OSTI)

    Mei, Vince C [ORNL; Baxter, Van D [ORNL

    2006-01-01T23:59:59.000Z

    Water heating accounts for the second largest portion of residential building energy consumption, after space conditioning. Existing HPWH products are a technical success, with demonstrated energy savings of 50% or more compared with standard electric resistance water heaters. However, current HPWHs available on the market cost an average of $1000 or more, which is too expensive for significant market penetration. What is needed is a method to reduce the first cost of HPWHs, so that the payback period will be reduced from 8 years to a period short enough for the market to accept this technology. A second problem with most existing HPWH products is the reliability issue associated with the pump and water loop needed to circulate cool water from the storage tank to the HPWH condenser. Existing integral HPWHs have the condenser wrapped around the water tank and thus avoid the pump and circulation issues but require a relatively complex and expensive manufacturing process. A more straightforward potentially less costly approach to the integral, single package HPWH design is to insert the condenser directly into the storage tank, or immersed direct heat exchanger (IDX). Initial development of an IDX HPWH met technical performance goals, achieving measured efficiencies or energy factors (EF) in excess of 1.79. In comparison conventional electric water heaters (EWH) have EFs of about 0.9. However, the initial approach required a 2.5" hole on top of the tank for insertion of the condenser - much larger than the standard openings typically provided. Interactions with water heater manufacturers indicated that the non standard hole size would likely lead to increased manufacturing costs (at least initially) and largely eliminate any cost advantage of the IDX approach. Recently we have been evaluating an approach to allow use of a standard tank hole size for insertion of the IDX condenser. Laboratory tests of a prototype have yielded an EF of 2.02.

  11. Universal investment in markets with transaction costs February 10, 2004

    E-Print Network [OSTI]

    Iyengar, Garud

    Universal investment in markets with transaction costs G. Iyengar February 10, 2004 Abstract time markets with proportional transaction costs. We do not make any distributional assumptions that the markets do not have transaction costs. Unfortunately, the policies designed for markets without costs do

  12. Efficient trading strategies in financial markets with proportional transaction costs

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Efficient trading strategies in financial markets with proportional transaction costs Luciano CAMPI market model with proportional transaction costs. In our setting, transaction costs may be random, time efficient portfolios in a general multivariate financial market with transaction costs as in [28, 4, 3

  13. Utility Name Retail Sales for 2010 (MWh) Projected Annual Cost

    E-Print Network [OSTI]

    All POUs Utility Name Retail Sales for 2010 (MWh) Projected Annual Cost 20122013 ($) Projected Annual Cost 20132014 ($) Projected Annual Cost 20142015 ($) Legend LADWP 22,856,346 720,123 720,123 720 Attachment B Response Utility Name Retail Sales for 2010 (MWh) Projected Annual Cost 2012 2013 ($) LADWP 22

  14. Managing County Employee Health Care Costs The Problem

    E-Print Network [OSTI]

    Managing County Employee Health Care Costs The Problem If food costs increased at same rate as health care, one dozen eggs would cost $80.20! 87.5% of health-care claims are due to employees cholesterol, and inactivity. Costs include unnecessary use of health-care services: 25% of doctor visits

  15. Cost Constrained Spectrum Sensing in Cognitive Radio Networks

    E-Print Network [OSTI]

    Yener, Aylin

    networks considering its system level cost that accounts for the local processing cost of sensing (sample collection and energy calculation at each secondary user) as well as the transmission cost (forwarding energy for various factors that contribute to the cost incurred by spectrum sensing. In this paper, we study energy

  16. ISU Sponsored Programs Costing Policy Iowa State University

    E-Print Network [OSTI]

    Daniels, Thomas E.

    what costs are allowable on federally funded grants, contracts and cooperative agreements (collectively). These federal regulations require that the same types of costs be treated consistently as either direct costs and various sponsor rules and regulations. II. Definitions Direct Costs OMB Circular A-21, Section D.1, states

  17. NREL Sheds Light on Integration Costs of Variable Generation and

    E-Print Network [OSTI]

    , such as wind and solar energy, provide benefits such as reduced environmental impact, lack of fuel consumptionNREL Sheds Light on Integration Costs of Variable Generation and Cost-Causation Integration costs are generally manageable, but calculating costs is challenging. Renewable energy generation sources

  18. Zero-Emission Vehicle Scenario Cost Analysis Using A Fuzzy Set-Based Framework

    E-Print Network [OSTI]

    Lipman, Timothy E.

    1999-01-01T23:59:59.000Z

    9: Carbon Fiber Composite Hydrogen storage Tank DEM costs (Costs Carbon Fiber Composite Hydrogen Storage Tank OEM Costs

  19. Brush Busters: How to Estimate Costs for Controlling Small Mesquite

    E-Print Network [OSTI]

    Ueckert, Darrell; McGinty, Allan

    1999-04-15T23:59:59.000Z

    rapidly as plant size increases. ? Costs can escalate rapidly if you apply leaf or stem sprays using excessive pressure or nozzles with large orifices. ? Labor is usually a major component of total cost with Brush Busters methods. Costs escalate rapidly... and Figure 2 estimates costs for the stem spray method). Each figure consists of three graphs. The upper graph shows the cost for the spray only. The center graph shows total cost for spray plus labor at $6 per hour. The bottom graph shows total cost...

  20. WREF 2012: THE PAST AND FUTURE COST OF WIND ENERGY

    SciTech Connect (OSTI)

    NREL,; Wiser, Ryan; Lantz, Eric; Hand, Maureen

    2012-03-26T23:59:59.000Z

    The future of wind power will depend on the ability of the industry to continue to achieve cost reductions. To better understand the potential for cost reductions, this report provides a review of historical costs, evaluates near-term market trends, and summarizes the range of projected costs. It also notes potential sources of future cost reductions. Our findings indicate that steady cost reductions were interrupted between 2004 and 2010, but falling turbine prices and improved turbine performance are expected to drive a historically low LCOE for current installations. In addition, the majority of studies indicate continued cost reductions on the order of 20%-30% through 2030. Moreover, useful cost projections are likely to benefit from stronger consideration of the interactions between capital cost and performance as well as trends in the quality of the wind resource where projects are located, transmission, grid integration, and other cost variables.