National Library of Energy BETA

Sample records for assign cbecs activity

  1. Principal Building Activities--1995 CBECS

    U.S. Energy Information Administration (EIA) Indexed Site

    Detailed Tables > Principal Building Activities Table Number of Buildings, Total Floorspace, and Total Site and Primary Energy Consumption for All Principal Building Activities,...

  2. 1999 CBECS Principal Building Activities

    U.S. Energy Information Administration (EIA) Indexed Site

    Data Reports > 2003 Building Characteristics Overview A Look at Building Activities in the 1999 Commercial Buildings Energy Consumption Survey The Commercial Buildings Energy...

  3. Compare All CBECS Activities: Electricity Use

    U.S. Energy Information Administration (EIA) Indexed Site

    Electricity Use Compare Activities by ... Electricity Use Total Electricity Consumption by Building Type Commercial buildings in the U.S. used a total of approximately 908 billion...

  4. Compare All CBECS Activities: District Heat Use

    U.S. Energy Information Administration (EIA) Indexed Site

    District Heat Use Compare Activities by ... District Heat Use Total District Heat Consumption by Building Type Commercial buildings in the U.S. used a total of approximately 433...

  5. Compare All CBECS Activities: Fuel Oil Use

    Gasoline and Diesel Fuel Update (EIA)

    Fuel Oil Use Compare Activities by ... Fuel Oil Use Total Fuel Oil Consumption by Building Type Commercial buildings in the U.S. used a total of approximately 1.3 billion gallons...

  6. CBECS 2012: Building Stock Results

    U.S. Energy Information Administration (EIA) Indexed Site

    A Look at the U.S. Commercial Building Stock: Results from EIA's 2012 Commercial Buildings Energy Consumption Survey (CBECS) CBECS 2012 - Release date: March 4, 2015 What is a commercial building? The CBECS includes buildings greater than 1,000 square feet that devote more than half of their floorspace to activity that is not residential, manufacturing, industrial, or agricultural. The 2012 CBECS collected building characteristics data from more than 6,700 U.S. commercial buildings. This report

  7. 1999 CBECS Detailed Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    Commercial Buildings Energy Consumption Survey (CBECS) > Detailed Tables 1999 CBECS Detailed Tables Building Characteristics | Consumption & Expenditures Data from the 1999...

  8. Commercial Buildings Energy Consumption Survey (CBECS) - U.S. Energy

    Gasoline and Diesel Fuel Update (EIA)

    Information Administration (EIA) Building Type Definitions In the Commercial Buildings Energy Consumption Survey (CBECS), buildings are classified according to principal activity, which is the primary business, commerce, or function carried on within each building. Buildings used for more than one of the activities described below are assigned to the activity occupying the most floorspace. A building assigned to a particular principal activity category may be used for other activities in a

  9. 1999 CBECS Summary Table for All Building Activities

    U.S. Energy Information Administration (EIA) Indexed Site

    Tables 1999 Commercial Buildings Consumption Survey SUMMARY TABLES FOR ALL PRINCIPAL BUILDING ACTIVITIES Number of Buildings (thousand) Floorspace (million square feet) Square...

  10. Commercial Buildings Energy Consumption Survey (CBECS) - Analysis &

    Gasoline and Diesel Fuel Update (EIA)

    Projections - U.S. Energy Information Administration (EIA) 2012 CBECS Preliminary Results What is a commercial building? The CBECS includes buildings greater than 1,000 square feet that devote more than half of their floorspace to activity that is neither residential, manufacturing, industrial, nor agricultural. When will energy consumption estimates be available? Energy consumption and expenditures data will be available beginning in spring 2015. CBECS data collection is currently in its

  11. Background Information on CBECS

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Information on CBECS The following topics provide detailed information on survey methodology, the kinds of errors associated with sample surveys, estimation of standard errors,...

  12. CBECS 1995 - Executive Summary

    U.S. Energy Information Administration (EIA) Indexed Site

    Executive Summary The Commercial Buildings Energy Consumption Survey (CBECS) collects information on physical characteristics of commercial buildings, building use and occupancy...

  13. Changes for the 2012 CBECS

    U.S. Energy Information Administration (EIA) Indexed Site

    for the 2012 CBECS The proposed design, procedures, and forms for the 2012 CBECS reflect a number of changes from the 2007 CBECS. These changes include:  The sample size for the 2012 CBECS will be 50 percent larger relative to the previous CBECS. The increase in sample size will allow for: o Fewer suppressed cells in published tables, o Better capture of emerging energy phenomena, such as new technologies for on- site electricity generation, o Lower relative standard errors for key statistics

  14. 2003 CBECS RSE Tables

    Gasoline and Diesel Fuel Update (EIA)

    Dec 2006 Next CBECS will be conducted in 2007 Standard error is a measure of the reliability or precision of the survey statistic. The value for the standard error can be used...

  15. Commercial Buildings Energy Consumption Survey (CBECS) - Analysis...

    Gasoline and Diesel Fuel Update (EIA)

    The Commercial Buildings Energy Consumption Survey (CBECS) project cycle spans at least ... Data collection for the 2012 Commercial Buildings Energy Consumption Survey (CBECS) took ...

  16. CBECS 2012: Energy Usage Summary

    U.S. Energy Information Administration (EIA) Indexed Site

    2012 Commercial Buildings Energy Consumption Survey: Energy Usage Summary CBECS 2012 - Release date: March 18, 2016 Despite a 14% increase in total buildings and a 22% increase in total floorspace since 2003, energy use in the estimated 5.6 million U.S. commercial buildings was up just 7% during the same period, according to new analysis from the 2012 Commercial Buildings Energy Consumption Survey (CBECS). Slower growth in commercial building energy demand since 2003 is explained in part by

  17. How the 2003 CBECS Was Conducted

    U.S. Energy Information Administration (EIA) Indexed Site

    to an establishment, is the basic unit of analysis for the CBECS because the building is the energy-consuming unit. The 2003 CBECS was the eighth survey conducted since...

  18. Project Registration Number Assignments (Active) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Active) Project Registration Number Assignments (Active) As of: May 2016 Provides a table of Project Registration Number Assignments (Active) Project Registration Number Assignment (Active) (511.76 KB) More Documents & Publications All Active DOE Technical Standards Document Project Registration Number Assignments (Completed

  19. Instructions to CBECS 1995 Microdata Files

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Files WHAT IS CBECS? Please Note: These microdata files, which contain building characteristics, energy consumption and expenditures, and energy end-use estimates replace the...

  20. CBECS Building Types | Open Energy Information

    Open Energy Info (EERE)

    Energy Consumption Survey (CBECS) performed by the U.S. Energy Information Administration (EIA)1. Education Food Sales Food Service Health Care (Inpatient) Health Care...

  1. 2007 CBECS Large Hospital Building FAQs

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    See the 2007 CBECS Large Hospital Building Methodology Report for details. Why are you publishing estimates only for large hospitals and not the rest of the commercial building ...

  2. 1992 CBECS User-Needs Study

    U.S. Energy Information Administration (EIA) Indexed Site

    Demand Representatives) indicated that its constituents are moving more toward technology modeling and CBECS, which has collected more and more technology data, is...

  3. CBECS Buildings Characteristics --Revised Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    Structure Tables (16 pages, 93 kb) CONTENTS PAGES Table 8. Building Size, Number of Buildings, 1995 Table 9. Building Size, Floorspace, 1995 Table 10. Year Constructed, Number of Buildings, 1995 Table 11. Year Constructed, Floorspace, 1995 These data are from the 1995 Commercial Buildings Energy Consumption Survey (CBECS), a national probability sample survey of commercial buildings sponsored by the Energy Information Administration, that provides information on the use of energy in commercial

  4. Commercial Buildings Energy Consumption Survey (CBECS) - How Was Energy

    Gasoline and Diesel Fuel Update (EIA)

    Usage Information Collected in the 2012 CBECS? Energy Usage Information Collected in the 2012 CBECS? CBECS 2012 - Release date: March 18, 2016 The Commercial Buildings Energy Consumption Survey (CBECS) project cycle spans at least four years, beginning with development of the sample frame and survey questionnaire and ending with release of data to the public. This set of three methodology documents provides details about each of the three major stages of the 2012 CBECS survey process. * How

  5. Preliminary CBECS End-Use Estimates

    U.S. Energy Information Administration (EIA) Indexed Site

    For the past three CBECS (1989, 1992, and 1995), we used a statistically-adjusted engineering (SAE) methodology to estimate end-use consumption. The core of the SAE methodology...

  6. Instructions to CBECS 1992 Microdata Files

    U.S. Energy Information Administration (EIA) Indexed Site

    and dBASE (CE92F01D.DBF) formats. These files contain the 1992 CBECS basic data including building characteristics, energy consumption and expenditures, and temperature data. The...

  7. 1992 CBECS BC

    U.S. Energy Information Administration (EIA) Indexed Site

    A68. Principal Building Activity, Number of Buildings and Floorspace, 1992 Building Characteristics RSE Column Factor: All Buildings (thousand) Total Floorspace (million square feet) RSE Row Factor 0.9 1.1 All Buildings ........................................................ 4,806 67,876 3.7 Principal Building Activity Education ............................................................ 301 8,470 7.5 Food Sales ......................................................... 130 757 14.5 Food

  8. Commercial Buildings Energy Consumption Survey (CBECS) - U.S...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Consumption & Efficiency Commercial Buildings Energy Consumption Survey (CBECS) Glossary FAQS Overview Data 2012 2003 1999 1995 1992 Previous Analysis & Projections ...

  9. Compare All CBECS Activities: Size

    U.S. Energy Information Administration (EIA) Indexed Site

    page, please call 202-586-8800. Square Feet per Building by Building Type Inpatient health buildings were by far the largest building type, on average, while food service and...

  10. Commercial Buildings Energy Consumption Survey (CBECS) - U.S. Energy

    Gasoline and Diesel Fuel Update (EIA)

    Information Administration (EIA) Estimation of Energy End-use Consumption CBECS 2012 - Release date: March 18, 2016 2012 CBECS The energy end-use consumption tables for the 2012 CBECS (Detailed Tables E1-E 11) provide estimates of the amount of electricity, natural gas, fuel oil, and district heat used for ten end uses: space heating, cooling, ventilation, water heating, lighting, cooking, refrigeration, computing (including servers), office equipment, and other uses. Although details vary

  11. Commercial Buildings Energy Consumption Survey (CBECS) - U.S. Energy

    Gasoline and Diesel Fuel Update (EIA)

    Information Administration (EIA) CBECS Terminology NOTE: This glossary is specific to the 1999, 2003 and 2012Commercial Buildings Energy Consumption Surveys (CBECS). CBECS glossaries for prior years can be found in the appendices of past CBECS reports. A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Account Classification: The method in which suppliers of electricity, natural gas, or fuel oil classify and bill their customers. Commonly used account classifications are

  12. Commercial Buildings Energy Consumption Survey (CBECS) - U.S. Energy

    Gasoline and Diesel Fuel Update (EIA)

    Information Administration (EIA) Relationship of CBECS Coverage to EIA Supply Surveys The primary purpose of the CBECS is to collect accurate statistics of energy consumption by individual buildings. EIA also collects data on total energy supply (sales). For the information on sales totals, a different reporting system is used for each fuel and the boundaries between the different sectors (e.g., residential, commercial, industrial) are drawn differently for each fuel. Background EIA sales

  13. CBECS 2012: Energy Assessor Experiment in the 2012 Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Consumption Survey Select Results from the Energy Assessor Experiment in the 2012 Commercial Buildings Energy Consumption Survey CBECS 2012 - Release date: December 15, 2015 In 2010, the National Research Council published a report1 on how to improve the U.S. Energy Information Administration (EIA)'s energy consumption surveys, including the Commercial Building Energy Consumption Survey (CBECS). Among the panel's recommendations was for EIA to test the feasibility of using energy

  14. Compare All CBECS Activities: Total Energy Use

    U.S. Energy Information Administration (EIA) Indexed Site

    are more likely to contain specialized, high energy-consuming equipment-food service (cooking and ventilation equipment), inpatient health care (medical equipment), and food sales...

  15. Compare All CBECS Activities: Electricity Generation

    U.S. Energy Information Administration (EIA) Indexed Site

    4, 2009 2:51 PM http:www.eia.govconsumptioncommercialdataarchivecbecspba99comparesize.html If you are having any technical problems with this site, please contact the EIA...

  16. Compare All CBECS Activities: Natural Gas Use

    U.S. Energy Information Administration (EIA) Indexed Site

    call 202-586-8800. Natural Gas Consumption per Building by Building Type Inpatient health care buildings used by far the most natural gas per building. Figure showing natural...

  17. T:\ClearanceEMEUConsumption\cbecs\pubuse89\txt\layouts&formats.txt

    U.S. Energy Information Administration (EIA) Indexed Site

    9/txt/layouts&formats.txt[3/19/2009 11:26:00 AM] December, 2008 1989 CBECS Building Characteristics and Consumption and Expenditures for All Buildings Public Use Files This document contains all the file layouts and format codes for the 1989 Commercial Buildings Energy Consumption Survey (CBECS) building characteristics and consumption and expenditures public use files. The files themselves can be downloaded in CSV (comma separated values) files from the CBECS web site:

  18. Commercial Buildings Energy Consumption Survey (CBECS) - Analysis &

    Gasoline and Diesel Fuel Update (EIA)

    Projections - U.S. Energy Information Administration (EIA) All Reports & Publications Search By: Go Pick a date range: From: To: Go Commercial Buildings Available formats Commercial Buildings Energy Consumption Survey 2012 - Detailed Tables Released: May 17, 2016 The 2012 CBECS consumption and expenditures detailed tables are comprised of Tables C1-C38, which cover overall electricity, natural gas, fuel oil and district heat consumption, and tables E1-E11, which disaggregate the same

  19. Survey Background and Technical Information on CBECS

    U.S. Energy Information Administration (EIA) Indexed Site

    place in, or is associated with, the buildings that house these commercial activities. Analysis of the structures, activities, and equipment associated with different types of...

  20. Commercial Buildings Energy Consumption Survey (CBECS) - Data - U.S. Energy

    Gasoline and Diesel Fuel Update (EIA)

    Information Administration (EIA) What is an RSE? The estimates in the Commercial Buildings Energy Consumption Survey (CBECS) are based on data reported by representatives of a statistically-designed subset of the entire commercial building population in the United States, or a "sample." Consequently, the estimates differ from the true population values. However, the sample design permits us to estimate the sampling error in each value. It is important to understand: CBECS estimates

  1. CBECS 1992 - BC Tables and Definitions

    U.S. Energy Information Administration (EIA) Indexed Site

    of building characteristics that provide the most comprehensive breakdown of principal building activity and energy sources and end uses, respectively. Generally, there are two...

  2. 2007 CBECS Large Hospital Building FAQs: 2003-2007 Comparison Graphs

    Gasoline and Diesel Fuel Update (EIA)

    FAQs: 2003-2007 Comparison Graphs Main Report | Methodology | FAQ | List of Tables CBECS 2007 - Release date: August 17, 2012 Jump to: Figure 1 | Figure 2 | Figure 3 | Figure 4 | Figure 5 Figure 1 Number of Large Hospital Buildings and 95% Confidence Intervals by Census Region, 2003 and 2007 Figure 2 Total Floorspace and 95% Confidence Intervals in Large Hospital Buildings by Census Region, 2003 and 2007 Figure 3 Major Fuel Intensity and 95% Confidence Intervals by Census Region, 2003 and 2007

  3. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Illuminance Assignments for CBECS Building Activity Categories Illuminance ranges were adopted from the 1987 Illuminating Engineering Society (IES) Lighting Handbook. The IES...

  4. Program Assignments | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services » Procurement Services » Program Assignments Program Assignments Office of Headquarters Procurement Services (MA-64) Program Assignments Mark C. Brady, Director,(202) 287-1389 Patricia Davies, Deputy Director, (202) 586-8975 CORPORATE SERVICES OFFICE - Anthony E. Cicala, Director, MA-64.1, (202) 586-7637 Strategic Initiatives Coordinator Competition Advocate Contracting Activity Task/Delivery Order Ombudsman Policy Flashes Independent Review Deborah Black - (202) 287-1416 Balanced

  5. CBECS Archive

    U.S. Energy Information Administration (EIA) Indexed Site

    Archived Publications & Reports (Click on table headings to sort) Title Release Year Cycle Year Format Large Hospital Buildings in the United States in 2007 Release Date: August...

  6. Unclassified Foreign Visits and Assignments

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-14

    To provide interim Department of Energy (DOE) requirements and responsibilities for unclassified visits and assignment by foreign nationals to DOE facilities for unclassified activities. This Notice supplements DOE P 142.1 dated 7-14-99, which sets overall Departmental policy on unclassified foreign visits and assignments. It is a complement to existing counterintelligence and security orders and policies. DOE N 251.53, dated 05/14/03, extends this directive until canceled. Cancels: DOE 1240.2B

  7. A path towards uncertainty assignment in an operational cloud-phase algorithm from ARM vertically pointing active sensors

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Riihimaki, Laura D.; Comstock, Jennifer M.; Anderson, Kevin K.; Holmes, Aimee; Luke, Edward

    2016-06-10

    Knowledge of cloud phase (liquid, ice, mixed, etc.) is necessary to describe the radiative impact of clouds and their lifetimes, but is a property that is difficult to simulate correctly in climate models. One step towards improving those simulations is to make observations of cloud phase with sufficient accuracy to help constrain model representations of cloud processes. In this study, we outline a methodology using a basic Bayesian classifier to estimate the probabilities of cloud-phase class from Atmospheric Radiation Measurement (ARM) vertically pointing active remote sensors. The advantage of this method over previous ones is that it provides uncertainty informationmore » on the phase classification. We also test the value of including higher moments of the cloud radar Doppler spectrum than are traditionally used operationally. Using training data of known phase from the Mixed-Phase Arctic Cloud Experiment (M-PACE) field campaign, we demonstrate a proof of concept for how the method can be used to train an algorithm that identifies ice, liquid, mixed phase, and snow. Over 95 % of data are identified correctly for pure ice and liquid cases used in this study. Mixed-phase and snow cases are more problematic to identify correctly. When lidar data are not available, including additional information from the Doppler spectrum provides substantial improvement to the algorithm. This is a first step towards an operational algorithm and can be expanded to include additional categories such as drizzle with additional training data.« less

  8. Project Registration Number Assignments (Completed) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Completed) Project Registration Number Assignments (Completed) As of: May 2016 Provides a table of Project Registration Number Assignments (Completed) Project Registration Number Assignments (Completed) (406.85 KB) More Documents & Publications All Active DOE Technical Standards Document Project Registration Number Assignments (Active

  9. Intergovernmental Personnel Act Assignments

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-08-24

    This Manual implements provisions of the Intergovernmental Personnel Act (IPA) within the Department of Energy (DOE) and establishes requirements, responsibilities, and authority for effecting assignments under the Act. Does not cancel other directives.

  10. Handbook on Overseas Assignments

    Broader source: Energy.gov [DOE]

    This handbook covers all types of Federal employment overseas, including details, both within DOE as well as to other agencies; transfers to approved international organizations; assignments to permanent DOE positions; cost-free experts; and personal services agreements (PSAs). This handbook contains information, guidance, sample service agreements, and related documentation that are to be used to implement the departments directives.

  11. Unclassified Foreign Visits and Assignments

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-06-18

    To define a program for unclassified foreign national access to Department of Energy sites, information, and technologies. This Order cancels DOE P 142.1, Unclassified Foreign Visits and Assignments, dated 7-14-99; DOE N 142.1, Unclassified Foreign Visits and Assignments, dated 7-14-99; Secretarial Memorandum Unclassified Foreign Visits and Assignments, dated 7-14-99; Memorandum from Francis S. Blake, Departmental Use of Foreign Access Central Tracking System, dated 11-05-01; Memorandum from Kyle E. McSlarrow, Interim Guidance for Implementation of the Department's Unclassified Foreign Visits and Assignments Program, dated 12-17-02; and Secretarial Memorandum, Policy Exclusion for Unclassified Foreign National's Access to Department of Energy Facilities in Urgent or Emergency Medical Situations, dated 4-10-01. Cancels: DOE P 142.1 and DOE N 142.1

  12. 2003 CBECS Sample Design

    U.S. Energy Information Administration (EIA) Indexed Site

    during the field period. The rate of nonresponse cases where the respondent spoke a language other than English was notably higher for establishments than for buildings (9...

  13. 1992 CBECS C & E

    U.S. Energy Information Administration (EIA) Indexed Site

    Consumption of Electricity by End Use, 1989 Electricity Consumption (trillion Btu) Office Space Ventil- Water Refrig- Equip- Total Heating Cooling ation Heating Lighting Cooking...

  14. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    5. Electricity Consumption and Expenditure Intensities, 1992 Building Characteristics RSE Column Factor: Electricity Consumption Electricity Expenditures RSE Row Factor per...

  15. 1992 CBECS C & E

    U.S. Energy Information Administration (EIA) Indexed Site

    Table B4. Consumption of Electricity by End Use, 1989 Electricity Consumption (trillion Btu) Office Space Ventil- Water Refrig- Equip- Total Heating Cooling ation Heating Lighting...

  16. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    4. Electricity Consumption and Conditional Energy Intensity for Buildings Heated with Electricity, 1992 Building Characteristics RSE Column Factor: Total Electricity Consumption...

  17. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    . Electricity Consumption and Conditional Energy Intensity for Buildings Cooled with Electricity, 1992 Building Characteristics RSE Column Factor: Total Electricity Consumption...

  18. CBECS - public use data

    U.S. Energy Information Administration (EIA) Indexed Site

    the data. Several variables are frequently used in the analysis of commercial energy data. These core variables are included in each group of variables: BLDGID3: building...

  19. CBECS - public use data

    U.S. Energy Information Administration (EIA) Indexed Site

    the data. Several variables are frequently used in the analysis of commercial energy data. These core variables are included in each group of variables: BLDGID4: building...

  20. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    Table 3.2. Total Energy Consumption by Major Fuel, 1992 Building Characteristics RSE Column Factor: All Buildings Total Energy Consumption (trillion Btu) RSE Row Factor Number of...

  1. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    . Consumption for Sum of Major Fuels, 1992 Building Characteristics RSE Column Factor: All Buildings Sum of Major Fuel Consumption RSE Row Factor Number of Buildings (thousand)...

  2. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    9. Consumption and Gross Energy Intensity by Building Size for Sum of Major Fuels, 1992 Building Characteristics RSE Column Factor: Sum of Major Fuel Consumption (trillion Btu)...

  3. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    . Expenditures for Sum of Major Fuels, 1992 Building Characteristics RSE Column Factor: All Buildings Sum of Major Fuel Expenditures RSE Row Factor Number of Buildings (thousand)...

  4. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    . Total Energy Consumption by Major Fuel, 1992 Building Characteristics RSE Column Factor: All Buildings Total Energy Consumption (trillion Btu) RSE Row Factor Number of Buildings...

  5. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Intensity for Sum of Major Fuels for Mercantile and Office Buildings, 1992 Building Characteristics RSE Column Factor: Sum of Major Fuel Consumption (trillion Btu) Total...

  6. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Intensity for Sum of Major Fuels in Older Buildings by Year Constructed, 1992 Building Characteristics RSE Column Factor: Sum of Major Fuel Consumption (trillion Btu) Total...

  7. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    Consumption and Gross Energy Intensity by Census Region for Sum of Major Fuels, 1992 Building Characteristics RSE Column Factor: Sum of Major Fuel Consumption (trillion Btu) Total...

  8. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    Expenditures by Census Region for Sum of Major Fuels, 1992 Building Characteristics RSE Column Factor: Sum of Major Fuel Expenditures (million dollars) Sum of Major Fuel...

  9. 1992 CBECS BC

    U.S. Energy Information Administration (EIA) Indexed Site

    . Census Region, Number of Buildings and Floorspace, 1992 Building Characteristics RSE Column Factor: Number of Buildings (thousand) Total Floorspace (million square feet) RSE Row Factor All Buildings Northeast Midwest South West All Buildings Northeast Midwest South West 0.6 1.2 1.1 1.0 1.3 0.6 1.3 1.1 1.1 1.2 All Buildings ................................... 4,806 771 1,202 1,963 870 67,876 13,400 17,280 24,577 12,619 6.3 Building Floorspace (square feet) 1,001 to 5,000

  10. 1992 CBECS BC

    U.S. Energy Information Administration (EIA) Indexed Site

    A8. Building Size, Number of Buildings, 1992 (Thousand) Building Characteristics RSE Column Factor: All Buildings Buildings by Size RSE Row Factor 1,001 to 5,000 Square Feet 5,001 to 10,000 Square Feet 10,001 to 25,000 Square Feet 25,001 to 50,000 Square Feet 50,001 to 100,000 Square Feet 100,001 to 200,000 Square Feet 200,001 to 500,000 Square Feet Over 500,000 Square Feet 0.5 0.7 0.8 0.8 1.0 1.1 1.3 1.4 2.2 All Buildings ..................................... 4,806 2,681 975 647 280 116 71 26 9

  11. 1992 CBECS BC

    U.S. Energy Information Administration (EIA) Indexed Site

    7. Employment Size Category, Number of Buildings, 1992 (Thousand) Building Characteristics RSE Column Factor: All Buildings Buildings by Number of Workers RSE Row Factor Less than 5 Workers 5 to 9 Workers 10 to 19 Workers 20 to 49 Workers 50 to 99 Workers 100 to 249 Workers 250 or More Workers 0.5 0.8 0.9 1.1 1.0 1.2 1.3 1.4 All Buildings ................................... 4,806 2,718 895 561 405 130 64 31 5.9 Building Floorspace (square feet) 1,001 to 5,000 ................................

  12. 1992 CBECS BC

    U.S. Energy Information Administration (EIA) Indexed Site

    9. Energy Sources, Number of Buildings, 1992 (Thousand) Building Characteristics RSE Column Factor: All Buildings All Buildings Using Any Energy Source Energy Sources Used (more than one may apply) RSE Row Factor Electricity Natural Gas Fuel Oil District Heat District Chilled Water Propane Wood 0.5 0.5 0.5 0.6 1.1 1.6 2.2 1.6 2.0 All Buildings ..................................... 4,806 4,620 4,616 2,665 559 95 28 337 103 7.7 Building Floorspace (Square Feet) 1,001 to 5,000

  13. 1992 CBECS BC

    U.S. Energy Information Administration (EIA) Indexed Site

    4. Percent of Floorspace Heated, Number of Buildings and Floorspace, 1992 Building Characteristics RSE Column Factor: Number of Buildings (thousand) Total Floorspace (million square feet) RSE Row Factor All Buildings Not Heated Less than 51 Percent Heated 51 to 99 Percent Heated 100 Percent Heated All Buildings Total Heated Floorspace in All Buildings Not Heated Less than 51 Percent Heated 51 to 99 Percent Heated 100 Percent Heated 0.6 1.6 1.2 1.1 0.7 0.6 0.6 2.2 1.6 1.2 0.7 All Buildings

  14. 1992 CBECS BC

    U.S. Energy Information Administration (EIA) Indexed Site

    7. Heating Equipment, Number of Buildings, 1992 (Thousand) Building Characteristics RSE Column Factor: All Buildings All Heated Buildings Heating Equipment (more than one may apply) RSE Row Factor Heat Pumps Furnaces Individual Space Heaters District Heat Boilers Packaged Heating Units Other 0.5 0.5 1.3 0.8 0.8 1.7 0.9 1.0 3.1 All Buildings ..................................... 4,806 4,178 449 1,692 1,464 93 624 870 42 6.7 Building Floorspace (square feet) 1,001 to 5,000

  15. 1992 CBECS BC

    U.S. Energy Information Administration (EIA) Indexed Site

    A57. Energy Conservation Features, Number of Buildings and Floorspace, 1992 Building Characteristics RSE Column Factor: Number of Buildings (thousand) Total Floorspace (million square feet) RSE Row Factor All Buildings Any Conser- vation Features Build- ing Shell HVAC Light- ing Other All Buildings Any Conser- vation Features Build- ing Shell HVAC Light- ing Other 0.8 0.8 0.8 0.9 1.0 1.9 0.8 0.9 0.9 0.9 1.2 1.7 All Buildings ................................... 4,806 4,357 4,223 2,604 1,178 264

  16. 1992 CBECS BC

    U.S. Energy Information Administration (EIA) Indexed Site

    . Summary Table of Square Feet, Hours of Operation and Age of Building, 1992 Building Characteristics RSE Column Factor: All Buildings (thousand) Total Floorspace (million square feet) Total Workers in All Buildings (thousand) Mean Square Feet per Building (thousand) Median Square Feet per Building (thousand) Mean Square Feet per Worker Median Square Feet per Worker Mean Hours per Week Median Hours per Week Median Age of Buildings (years) RSE Row Factor 1.1 1.2 1.5 1.0 -- 1.3 -- 0.4 -- -- All

  17. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    reported for fewer than 20 buildings. Notes: * To obtain the RSE percentage for any table cell, multiply the corresponding RSE column and RSE row factors. * See Glossary for...

  18. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    . Peak Electricity Demand Category, Number of Buildings, 1992 (Thousand) Building Characteristics RSE Column Factor: Demand- Metered Buildings 10 kW or Less 11 to 25 kW 26 to 50 kW...

  19. 1989 CBECS EUI

    U.S. Energy Information Administration (EIA) Indexed Site

    Season of Peak Electricity Demand, Number of Buildings and Floorspace, 1992 Building Characteristics RSE Column Factor: Number of Buildings (thousand) Total Floorspace (million...

  20. 1992 CBECS C & E

    U.S. Energy Information Administration (EIA) Indexed Site

    of District Heat by End Use, 1989 District Heat Consumption (trillion Btu) Space Water a Total Heating Heating Other RSE Building Row Characteristics Factor 1.0 NF NF NF RSE...

  1. 1992 CBECS C & E

    U.S. Energy Information Administration (EIA) Indexed Site

    0. Consumption of Fuel Oil by End Use, 1989 Fuel Oil Consumption (trillion Btu) Space Water a Total Heating Heating Other RSE Building Row Characteristics Factor 1.0 NF NF NF RSE...

  2. 1992 CBECS C & E

    U.S. Energy Information Administration (EIA) Indexed Site

    of Natural Gas by End Use, 1989 Natural Gas Consumption (trillion Btu) Space Water a Total Heating Heating Cooking Other RSE Building Row Characteristics Factor 1.0 NF...

  3. CBECS - public use data

    U.S. Energy Information Administration (EIA) Indexed Site

    the data. Several variables are frequently used in the analysis of commercial energy data. These core variables are included in each group of variables: PUBID8: building...

  4. 1992 CBECS Detailed Tables

    Gasoline and Diesel Fuel Update (EIA)

    (8 pages, 49 KB) -- 3.27, 3.28 -- -- -- Yellow Arrow Peak Demand Intensity and Load Factoring (percentile) (4 pages, 26 KB) -- 3.29 -- -- -- Specific questions on these topics...

  5. 1999 CBECS Sample Design

    U.S. Energy Information Administration (EIA) Indexed Site

    contractor for survey verification purposes only. Geographic identifiers and NOAA Weather Division identifiers are not included on micro-data files delivered to EIA....

  6. Unclassified Foreign Visits and Assignments

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-14

    International cooperation and collaboration is an important element in the effective planning and implementation of many Department of Energy (DOE) programs. DOE and its international partners benefit from the exchange of information that results from a managed process of unclassified visits and assignments by foreign nationals. These visits and assignments must be conducted in a manner consistent with U.S. and DOE national security policies, requirements, and objectives including export control laws and regulations. Canceled by DOE O 142.3. Does not cancel other directives.

  7. Foreign National Visit/Assignment Questionnaire

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unclassified Foreign National Visits & Assignments Questionnaire Welcome to Department of Energy, Headquarters We are looking forward to your visit or assignment with us. In ...

  8. Unclassified Foreign National Visits & Assignments Questionnaire |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Services » Calibration Facilities » Unclassified Foreign National Visits & Assignments Questionnaire Unclassified Foreign National Visits & Assignments Questionnaire Visitors who are foreign nationals must complete and submit the Unclassified Foreign National Visits & Assignments Questionnaire 30 days before accessing facilities. Unclassified Foreign National Visits & Assignments Questionnaire (192.5 KB) More Documents & Publications HQ FNVA

  9. Continuous Learning Points Credit Assignment Table | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Microsoft Word - CLPCreditAssignmentTable More Documents & Publications PMCDP Curriculum Learning Map Microsoft Word - AL2006-07.doc PMCDP Certification and Equivalency ...

  10. Foreign National Visit/Assignment Questionnaire

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information (PII) Company Proprietary Information ... areas are to be visited) Property Protection Area with ... and Assignments 47 Is an Export Control License Required? ...

  11. Preparing for Project Implementation Assigning Accountability...

    Broader source: Energy.gov (indexed) [DOE]

    Assigning Accountability for Each Project (April 14, 2010) (598.01 KB) More Documents & Publications Preparing for Project Implementation after an Energy Assessment

  12. JOBAID-LAUNCHING AND COMPLETING ASSIGNED SURVEY

    Broader source: Energy.gov [DOE]

    The purpose of this job aid is to guide users through the step-by-step process of launching and completing assigned surverys.

  13. Organizations' Assignment of Responsibility - DOE Directives,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Delegations, and Requirements Organizations' Assignment of Responsibility Current By Functional Area By Position Designations Assignments Rescinded by Diane Johnson More filters Less filters Filters applied Δ Hide filters ∇ Show filters (0) [X] Remove all Issue Date Start date End date ffe8aa65e5ad705f837fe439ace37780

  14. JOBAID-SELF ASSIGNING COURSES (ITEMS)

    Broader source: Energy.gov [DOE]

    In this jobaid you will learn to use the Course Catalog, Browse Catalog, Recommended Items, Locate and Self-Assign Items (Courses) Using the Search Catalog features, Narrow Course Searches using...

  15. Help:Assigning permissions | Open Energy Information

    Open Energy Info (EERE)

    search "Assigning permissions" means granting users extra rights within the wiki software (or revoking these rights). This is done by going to the Special:UserRights page, and...

  16. Description of CBECS Building Types

    U.S. Energy Information Administration (EIA) Indexed Site

    or public safety. jail, reformatory, or penitentiary courthouse or probation office fire or police station Top Religious Worship Buildings in which people gather for religious...

  17. Description of CBECS Building Types

    U.S. Energy Information Administration (EIA) Indexed Site

    Buildings used for the preservation of law and order or public safety. police station fire station jail, reformatory, or penitentiary courthouse or probation office Top Religious...

  18. CBECS Buildings Characteristics --Revised Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    Totals and Means of Floorspace, Number of Workers, and Hours of Operation, 1995 Building Characteristics RSE Column Factor: All Buildings (thousand) Total Floorspace (million...

  19. CBECS Buildings Characteristics --Revised Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Sources and End Use Tables (27 pages, 152 kb) CONTENTS PAGES Table 18. Energy Sources, Number of Buildings, 1995 Table 19. Energy Sources, Floorspace, 1995 Table 20. Energy End Uses, Number of Buildings and Floorspace, 1995 Table 21. Space-Heating Energy Sources, Number of Buildings, 1995 Table 22. Space-Heating Energy Sources, Floorspace, 1995 Table 23. Primary Space-Heating Energy Sources, Number of Buildings, 1995 Table 24. Primary Space-Heating Energy Sources, Floorspace, 1995 Table

  20. CBECS Buildings Characteristics --Revised Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    End-Use Equipment Tables (27 pages, 151 kb) CONTENTS PAGES Table 33. Heating Equipment, Number of Buildings, 1995 Table 34. Heating Equipment, Floorspace, 1995 Table 35. Cooling Equipment,Number of Buildings, 1995 Table 36. Cooling Equipment, Floorspace, 1995 Table 37. Refrigeration Equipment, Number of Buildings and Floorspace, 1995 Table 38. Water-Heating Equipment, Number of Buildings and Floorspace, 1995 Table 39. Lighting Equipment, Number of Buildings, 1995 Table 40. Lighting Equipment,

  1. 2003 CBECS Detailed Tables: Summary

    U.S. Energy Information Administration (EIA) Indexed Site

    c32.pdf c32.xls c32.html Fuel Oil (Tables C33-C36) set12-pdf Table C33. Total Fuel Oil Consumption and Expenditures c33-pdf c33.xls c33.html Table C34. Fuel Oil Consumption...

  2. 1999 CBECS Public Use Files

    U.S. Energy Information Administration (EIA) Indexed Site

    only. Geographic identifiers and National Oceanic and Atmospheric Administration Weather Division identifiers are not included on any data files delivered to EIA. Geographic...

  3. CBECS Buildings Characteristics --Revised Tables

    Gasoline and Diesel Fuel Update (EIA)

    Contact: Martha Johnson, Survey Manager (martha.johnson@eia.doe.gov) World Wide Web: http:www.eia.doe.govemeuconsumption 4 4 3 3 5 5 Commercial Buildings Energy Consumption ...

  4. CBECS Buildings Characteristics --Revised Tables

    Gasoline and Diesel Fuel Update (EIA)

    Contact: Martha Johnson, Survey Manager (martha.johnson@eia.doe.gov) World Wide Web: http:www.eia.doe.govemeuconsumption 4 5 5 5 5 Commercial Buildings Energy Consumption ...

  5. CBECS Buildings Characteristics --Revised Tables

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Contact: Martha Johnson, Survey Manager (martha.johnson@eia.doe.gov) World Wide Web: http:www.eia.doe.govemeuconsumption 4 4 3 5 Commercial Buildings Energy Consumption Surveys ...

  6. CBECS Buildings Characteristics --Revised Tables

    Gasoline and Diesel Fuel Update (EIA)

    Contact: Martha Johnson, Survey Manager (martha.johnson@eia.doe.gov) World Wide Web: http:www.eia.doe.govemeuconsumption 6 6 Commercial Buildings Energy Consumption Surveys ...

  7. CBECS Buildings Characteristics --Revised Tables

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Contact: Martha Johnson, Survey Manager (martha.johnson@eia.doe.gov) World Wide Web: http:www.eia.doe.govemeuconsumption 4 4 4 4 Commercial Buildings Energy Consumption Surveys ...

  8. 2210R1 ES&H Staff Assignments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    210 Appendix R1 Staff Assigned to ES&H Activities 1.0 Purpose This appendix provides information for current Environmental, Safety and Health (ES&H) related staff positions at Jefferson Lab. Other positions of responsibility are outlined on the various Division & Department's Organization Charts. * Section 2.0 - Contact Information for Hazard Issues * Section 3.0 - Contact Information for Responsible Positions * Section 4.0 - Councils and Committees * Section 5.0 - Division Safety

  9. Unclassified Foreign National Visits & Assignments Questionnaire

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unclassified Foreign National Visits & Assignments Questionnaire |Welcome to U.S. Department of Energy Office of Legacy Management! We are looking forward to your visit or assignment with us. In order to comply with our security requirements and ensure that your time with the Department of Energy goes smoothly we need to obtain some information from you prior to your arrival. Please take a few minutes to provide the information requested below for each member of your party that is not a U.S.

  10. Unclassified Foreign Visits and Assignments Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-06-18

    The order defines a program for unclassified foreign national access to Department of Energy sites, information, and technologies. The page change streamlines the HQs Management Panel review process to include reviews by HSS, IN, and a representative of the cognizant under secretary for access requests involving foreign nationals. Cancels Secretarial Memorandum, Unclassified Foreign Visits and Assignments, dated 7-14-99; Memorandum from Francis S. Blake, Departmental Use of Foreign Access Central Tracking System, dated 11-05-01; Memorandum from Kyle E. McSlarrow, Interim Guidance for Implementation of the Department's Unclassified Foreign Visits and Assignments Program, dated 12-17-02; and Secretarial Memorandum, Policy Exclusion for Unclassified Foreign National's Access to Department of Energy Facilities in Urgent or Emergency Medical Situations, dated 4-10-01. Cancels: DOE P 142.1 and DOE N 142.1

  11. Unclassified Foreign National Visits and Assignments

    Broader source: Energy.gov [DOE]

    Attached for your information is a March 9,201 0 Memorandum from the Deputy Secretary relaxing certain check and approval requirements relating to visits and assignments of foreign nationals to DOE facilities and National Laboratories, including National Nuclear Security Administration sites. This is part of an ongoing review of DOE Order 142.3. Please furnish a copy to affected contractors pending revision of the Order and its associated Contractor Requirements Document.

  12. NREL Researcher on Assignment in South Africa

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on Assignment in South Africa For more information contact: e:mail: Public Affairs Golden, Colo., Oct. 20, 1997 -- A policy analyst with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) is headed to South Africa for eight months of high-level economic research on the South African electricity supply industry. Principal Analyst Paul Galen in NREL's Center for Energy Analysis and Applications will be a visiting researcher with the South African Minerals and Energy

  13. Calibration Pad Assignments for Spectral Gamma (November 1985) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Pad Assignments for Spectral Gamma (November 1985) Calibration Pad Assignments for Spectral Gamma (November 1985) Calibration Pad Assignments for Spectral Gamma (November 1985) Calibration Pad Assignments for Spectral Gamma (November 1985) (5.3 MB) More Documents & Publications Parameter Assignments for Spectral Gamma-Ray Borehole Calibration Models (April 1984) Field Calibration Facilities for Environmental Measurement of Radium, Thorium, and Potassium (October 2013) Grade

  14. Parameter Assignments for Spectral Gamma-Ray Borehole Calibration Models

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (April 1984) | Department of Energy Parameter Assignments for Spectral Gamma-Ray Borehole Calibration Models (April 1984) Parameter Assignments for Spectral Gamma-Ray Borehole Calibration Models (April 1984) Parameter Assignments for Spectral Gamma-Ray Borehole Calibration Models (April 1984) Parameter Assignments for Spectral Gamma-Ray Borehole Calibration Models (April 1984) (3.25 MB) More Documents & Publications Grade Assignments for Models Used for Calibration of Gross-Count

  15. 3210T3 Risk Code Assignment;

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    210 Appendix T3 Risk Code Assignment 1.0 Purpose Identification of work hazards and understanding their risks is an essential part of Jefferson Lab's work process as defined in ES&H Manual Chapter 3210 Appendix T1 Work Planning, Control, and Authorization Procedure. The purpose of this document is to demonstrate the accepted method for determining the Risk Code for task steps identified while completing Task Hazard Analysis (THA) Worksheet. 2.0 Scope This appendix describes the procedure for

  16. Foreign Visits & Assignments Guidelines | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Foreign Visits & Assignments Guidelines Foreign Visits and Assignments Requests (473's) and Specific Security Plans Please use the following links to reach Form 473, the Foreign Visits and Assignments Request Form, as well as the Ames Laboratory Specific Security Plan Form. Form 473 Foreign Visits and Assignments Request Form Specific Security Plan Program Overview. The USDOE considers hosting foreign visitors a critical responsibility. This is especially true when the foreign national is

  17. Microsoft Word - CLP_Credit_Assignment_Table

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Units TRAININGEDUCATION Attendance at academic courses at an accredited college or ... (in relevant subject area or project management association) Active Membership ...

  18. Recognizing and Assigning ESPC Risks and Responsibilities Using the Risk,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Responsibility, and Performance Matrix | Department of Energy Recognizing and Assigning ESPC Risks and Responsibilities Using the Risk, Responsibility, and Performance Matrix Recognizing and Assigning ESPC Risks and Responsibilities Using the Risk, Responsibility, and Performance Matrix Document offers guidance on how to recognize and assign energy savings performance contract (ESPC) risks and responsibilities using the risk, responsibility, and performance matrix, also known as RRPM.

  19. Measuring the maturity of a technology : guidance on assigning...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Measuring the maturity of a technology : guidance on assigning a TRL. ... for supplier-customer interactions at a very early stage in technology development. ...

  20. Chief of Nuclear Safety (CNS) Staff Assignments & Expertise ...

    Broader source: Energy.gov (indexed) [DOE]

    Chief of Nuclear Safety (CNS) Staff Assignments & Expertise CNS staff maintains adequate technical proficiency, including the timely completion of Senior Technical Safety Manager...

  1. FOAM (Functional Ontology Assignments for Metagenomes): A Hidden...

    Office of Scientific and Technical Information (OSTI)

    Ontology Assignments for Metagenomes): A Hidden Markov Model (HMM) database with environmental focus Citation Details In-Document Search Title: FOAM (Functional Ontology...

  2. Recognizing and Assigning ESPC Risks and Responsibilities Using...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Using the Risk, Responsibility, and Performance Matrix Recognizing and Assigning ESPC Risks and Responsibilities Using the Risk, Responsibility, and Performance Matrix ...

  3. Acquisition Letter on Contractor Domestic Extended Personnel Assignments

    Broader source: Energy.gov [DOE]

    The attached Acquisition Letter has been issued to provide guidance on the Department's policy governing reimbursement of costs associated with contractor domestic extended personnel assignments.

  4. 1999 Commercial Building Characteristics--Detailed Tables--Principal...

    U.S. Energy Information Administration (EIA) Indexed Site

    Principal Building Activities > Detailed Tables-Principal Building Activities Complete Set of 1999 CBECS Detailed Tables Detailed Tables-Principal Building Activities Table B1....

  5. NNSA authorizes mission assignment transfer to Kansas City Plant | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) authorizes mission assignment transfer to Kansas City Plant Wednesday, June 25, 2014 - 1:05pm To improve efficiency across the nuclear security enterprise, NNSA recently transferred the mission assignment of several product families from Sandia National Laboratories to the Kansas City Plant. The mission reassignment better aligns responsibilities with each site's core competencies and will leverage Kansas City's Supply Chain Management systems and

  6. Water Data Collection in the 2007 CBECS

    Gasoline and Diesel Fuel Update (EIA)

    BOE Reserve Class No 2001 reserves 0.1 - 10 MBOE 10.1 - 100 MBOE 100.1 - 1,000 MBOE 1,000.1 - 10,000 MBOE 10,000.1 - 100,000 MBOE > 100,000 MBOE Denver Basin Outline 0 20 40 10 30 Miles ± CO 2001 Reserve Summary for All Denver Basin Fields KS NE CO NE WY KS SD Index Map For 3 Denver Basin Panels The mapped oil and gas field boundary outlines were created by the Reserves and Production Division, Office of Oil and Gas, Energy Information Administration pursuant to studies required by Section

  7. CBECS 1992 - Building Characteristics, Detailed Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    major topics of each table. Directions for calculating an approximate relative standard error (RSE) for each estimate in the tables are presented in Figure A1, "Use of RSE Row...

  8. CBECS 1992 - Consumption & Expenditures, Detailed Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    consumption by major fuel, 1992 Divider Line To View andor Print Reports (requires Adobe Acrobat Reader) - Download Adobe Acrobat Reader If you experience any difficulties,...

  9. CBECS 1992 - Detailed Tables Word Definitions

    U.S. Energy Information Administration (EIA) Indexed Site

    Confidence Levels Confidence Levels The 95-percent confidence range can be determined using the approximate standard error of the estimate. To calculate the 95-percent confidence...

  10. 2003 CBECS Pre-Test Questionnaire

    Gasoline and Diesel Fuel Update (EIA)

    A U.S. Department of Energy Commercial Buildings Energy Consumption Survey for 2007 BUILDING QUESTIONNAIRE Form Approval OMB No.: 1905-0145 Expires: 9302010 TABLE OF CONTENTS How ...

  11. Commercial Buildings Energy Consumption Survey (CBECS) - Data...

    Gasoline and Diesel Fuel Update (EIA)

    Consequently, the estimates differ from the true population values. However, the sample design permits us to estimate the sampling error in each value. It is important to ...

  12. 2003 CBECS Pre-Test Questionnaire

    Gasoline and Diesel Fuel Update (EIA)

    ... central physical plant that produces and distributes district hot water, district steam, district chilled water, or electricity to more than one building ? 1 Yes 2 No NEXT IF Yes ...

  13. 2003 CBECS Pre-Test Questionnaire

    Gasoline and Diesel Fuel Update (EIA)

    ... central physical plant that produces and distributes district hot water, district steam, district chilled water, or electricity to more than one building? 1 Yes 2 No NEXT IF Yes ...

  14. 2007 CBECS Large Hospital Building Methodology Report

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    that were present in the building, the types of energy sources used, and the amount and cost of energy used in the building in the year 2007. If the respondents to the Building ...

  15. Energy Information Administration (EIA)- CBECS Survey Background...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... Same as 1992 Cost of gas purchased from other than local distribution company Not collected Not collected Not collected Consumption and Expenditures Estimated cost (ranges) of ...

  16. Assessment of Energy Use in Multibuilding Facilities (1989 data...

    U.S. Energy Information Administration (EIA) Indexed Site

    in general, and tend to be either engaged in energy-intensive activities such as health care, or associated with industrial activities. By CBECS definition, commercial buildings...

  17. Statistical methods of spin assignment in compound nuclear reactions

    SciTech Connect (OSTI)

    Mach, H.; Johns, M.W.

    1985-01-15

    Spin assignment to nuclear levels can be obtained from standard in-beam gamma-ray spectroscopy techniques and in the case of compound nuclear reactions can be complemented by statistical methods. These are based on a correlation pattern between level spin and gamma-ray intensities feeding low-lying levels. Three types of intensity and level spin correlations are found suitable for spin assignment: shapes of the excitation functions, ratio of intensity at two beam energies or populated in two different reactions, and feeding distributions. Various empirical attempts are examined and the range of applicability of these methods as well as the limitations associated with them are given.

  18. Electric Utility Company Assigned to a Zip Code? | OpenEI Community

    Open Energy Info (EERE)

    Electric Utility Company Assigned to a Zip Code? Home I have found an error in the utility company assigned to a zip code. I am not sure if the "assigned" utility company covers...

  19. Manual of functions, assignments, and responsibilities for nuclear safety: Revision 2

    SciTech Connect (OSTI)

    Not Available

    1994-10-15

    The FAR Manual is a convenient easy-to-use collection of the functions, assignments, and responsibilities (FARs) of DOE nuclear safety personnel. Current DOE directives, including Orders, Secretary of Energy Notices, and other assorted policy memoranda, are the source of this information and form the basis of the FAR Manual. Today, the majority of FARs for DOE personnel are contained in DOE`s nuclear safety Orders. As these Orders are converted to rules in the Code of Federal Regulations, the FAR Manual will become the sole source for information relating to the functions, assignments, responsibilities of DOE nuclear safety personnel. The FAR Manual identifies DOE directives that relate to nuclear safety and the specific DOE personnel who are responsible for implementing them. The manual includes only FARs that have been extracted from active directives that have been approved in accordance with the procedures contained in DOE Order 1321.1B.

  20. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    from the engineering literature, based on CBECS building activity.) 4. Efficacy: an energy efficiency measure. Technically, the amount of light produced per unit of energy...

  1. Method for assigning sites to projected generic nuclear power plants

    SciTech Connect (OSTI)

    Holter, G.M.; Purcell, W.L.; Shutz, M.E.; Young, J.R.

    1986-07-01

    Pacific Northwest Laboratory developed a method for forecasting potential locations and startup sequences of nuclear power plants that will be required in the future but have not yet been specifically identified by electric utilities. Use of the method results in numerical ratings for potential nuclear power plant sites located in each of the 10 federal energy regions. The rating for each potential site is obtained from numerical factors assigned to each of 5 primary siting characteristics: (1) cooling water availability, (2) site land area, (3) power transmission land area, (4) proximity to metropolitan areas, and (5) utility plans for the site. The sequence of plant startups in each federal energy region is obtained by use of the numerical ratings and the forecasts of generic nuclear power plant startups obtained from the EIA Middle Case electricity forecast. Sites are assigned to generic plants in chronological order according to startup date.

  2. Automated Pre-processing for NMR Assignments with Reduced Tedium

    Energy Science and Technology Software Center (OSTI)

    2004-05-11

    An important rate-limiting step in the reasonance asignment process is accurate identification of resonance peaks in MNR spectra. NMR spectra are noisy. Hence, automatic peak-picking programs must navigate between the Scylla of reliable but incomplete picking, and the Charybdis of noisy but complete picking. Each of these extremes complicates the assignment process: incomplete peak-picking results in the loss of essential connectivities, while noisy picking conceals the true connectivities under a combinatiorial explosion of false positives.more » Intermediate processing can simplify the assignment process by preferentially removing false peaks from noisy peak lists. This is accomplished by requiring consensus between multiple NMR experiments, exploiting a priori information about NMR spectra, and drawing on empirical statistical distributions of chemical shift extracted from the BioMagResBank. Experienced NMR practitioners currently apply many of these techniques "by hand", which is tedious, and may appear arbitrary to the novice. To increase efficiency, we have created a systematic and automated approach to this process, known as APART. Automated pre-processing has three main advantages: reduced tedium, standardization, and pedagogy. In the hands of experienced spectroscopists, the main advantage is reduced tedium (a rapid increase in the ratio of true peaks to false peaks with minimal effort). When a project is passed from hand to hand, the main advantage is standardization. APART automatically documents the peak filtering process by archiving its original recommendations, the accompanying justifications, and whether a user accepted or overrode a given filtering recommendation. In the hands of a novice, this tool can reduce the stumbling block of learning to differentiate between real peaks and noise, by providing real-time examples of how such decisions are made.« less

  3. Assigning Seismic Design Category to Large Reactors: A Case Study of the ATR

    Broader source: Energy.gov [DOE]

    Assigning Seismic Design Category to Large Reactors: A Case Study of the ATR Stuart Jensen October 21, 2014

  4. Activation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Emergency Response Services Activated At the Waste Isolation Pilot Plant CARLSBAD, N.M., 252014, 11:43 a.m. (MDT) - Emergency response services have been activated at the Waste...

  5. Term Assignments of Contractors to the Washington D.C. Area.

    Broader source: Energy.gov [DOE]

    On July 2, 2013 the DOE Office of the Inspector General issued Audit Report Number 0890 entitled, "Follow-up Audit on Term Assignments of Contractor Employees." The audit was conducted as a follow-up of the FY 2005 audit of "Management of Facility Contractors Assigned to the Washington D.C. area DOE/IG 0710." The earlier report found instances where assignment justifications were insufficient, costs appeared excessive and allowances inconsistent. The follow-up audit recognized improved management of assignments but noted assignment justifications and cost management could be improved. The report recommended DOE determine prior year actual costs to assist in calculating the estimated costs for the upcoming year of multi-year assignments and ensure assignment records in the Departmental Management and Tracking System (DMATS) are accurate.

  6. Assignments of the Raman modes of monoclinic erbium oxide

    SciTech Connect (OSTI)

    Yan, D.; Wu, P. Zhang, S. P.; Liang, L.; Yang, F.; Pei, Y. L.; Chen, S.

    2013-11-21

    As a heavy rare earth oxide, erbium oxide (Er{sub 2}O{sub 3}) has many attractive properties. Monoclinic Er{sub 2}O{sub 3} has useful properties not found in stable cubic Er{sub 2}O{sub 3}, such as unique optical properties and high radiation damage tolerance. In this study, cubic Er{sub 2}O{sub 3} coating and Er{sub 2}O{sub 3} coating with mixed phases were prepared. The Raman scattering spectra of these coatings were investigated by using a confocal micro-Raman spectrometer equipped with 325, 473, 514, 532, 633, and 784 nm lasers. A total of 17 first-order Raman modes of monoclinic Er{sub 2}O{sub 3} were identified and assigned. The modes at 83, 112, 152, 170, 278, 290, 409, 446, 478, 521, 603, and 622 cm{sup −1} are of A{sub g} symmetry, whereas modes at 71, 98, 333, 409, 446, and 468 cm{sup −1} are of B{sub g} symmetry. This research provides basic data necessary for the characterization of monoclinic Er{sub 2}O{sub 3} by Raman spectroscopy.

  7. Quadratic partial eigenvalue assignment in large-scale stochastic dynamic systems for resilient and economic design

    SciTech Connect (OSTI)

    Das, Sonjoy; Goswami, Kundan; Datta, Biswa N.

    2014-12-10

    Failure of structural systems under dynamic loading can be prevented via active vibration control which shifts the damped natural frequencies of the systems away from the dominant range of loading spectrum. The damped natural frequencies and the dynamic load typically show significant variations in practice. A computationally efficient methodology based on quadratic partial eigenvalue assignment technique and optimization under uncertainty has been formulated in the present work that will rigorously account for these variations and result in an economic and resilient design of structures. A novel scheme based on hierarchical clustering and importance sampling is also developed in this work for accurate and efficient estimation of probability of failure to guarantee the desired resilience level of the designed system. Numerical examples are presented to illustrate the proposed methodology.

  8. Chief of Nuclear Safety (CNS) Staff Assignments & Expertise | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Chief of Nuclear Safety (CNS) Staff Assignments & Expertise Chief of Nuclear Safety (CNS) Staff Assignments & Expertise Chief of Nuclear Safety (CNS) Staff Assignments & Expertise CNS staff maintains adequate technical proficiency, including the timely completion of Senior Technical Safety Manager (STSM) qualification. Further, CNS staff periodically review and assess whether EM is maintaining adequate numbers of technically competent personnel necessary to fulfill its

  9. Calibration Model Assignments expressed as U3O8, Summary Table ES-1 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Model Assignments expressed as U3O8, Summary Table ES-1 Calibration Model Assignments expressed as U3O8, Summary Table ES-1 Calibration Model Assignments expressed as U3O8, Summary Table ES-1 Calibration Model Assignments expressed as U3O8, Summary Table ES-1 (25.9 KB) More Documents & Publications Field Calibration Facilities for Environmental Measurement of Radium, Thorium, and Potassium (October 2013) Offshore Wind Market and Economic Analysis Report 2013 Natural

  10. Audit Report - Follow-up Audit on Term Assignments of Contractor...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    when compared to other means of acquiring the necessary knowledge and experience. Our 2005 report on Management of Facility Contractors Assigned to the Washington, DC Area ...

  11. Parameter assignments for spectral gamma-ray borehole calibration models. National Uranium Resource Evaluation

    SciTech Connect (OSTI)

    Heistand, B.E.; Novak, E.F.

    1984-04-01

    This report documents the work performed to determine the newly assigned concentrations for the spectral gamma-ray borehole calibration models. Thirty-two models, maintained by the US Department of Energy, are included in this study, and are grouped into eight sets of four models each. The eight sets are located at sites across the United States, and are used to calibrate logging instruments. The assignments are based on in-situ logging data to ensure self-consistency in the assigned concentrations, and on laboratory assays of concrete samples from each model to provide traceability to the New Brunswick Laboratory (NBL) standards. 13 references, 7 figures, 17 tables.

  12. Unclassified Foreign National Visits and Assignments at Oak Ridge National Laboratory

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unclassified Foreign National Visits and Assignments at Oak Ridge National Laboratory INS-O-13-05 September 2013 Department of Energy Washington, DC 20585 September 16, 2013 MEMORANDUM FOR THE MANAGER, OAK RIDGE NATIONAL LABORATORY SITE OFFICE FROM: Sandra D. Bruce Assistant Inspector General for Inspections Office of Inspector General SUBJECT: INFORMATION: Inspection Report on "Unclassified Foreign National Visits and Assignments at Oak Ridge National Laboratory" BACKGROUND In support

  13. 1999 Commercial Buildings Characteristics--CBECS Building Types

    U.S. Energy Information Administration (EIA) Indexed Site

    Order and Safety jail, reformatory, or penitentiary courthouse or probation office fire or police station Religious Worship Includes buildings such as chapels, churches,...

  14. C:\\MYDOCS\\CBECS-FORM\\CBECSFRM\\ELECTRIC.WPD

    U.S. Energy Information Administration (EIA) Indexed Site

    Commercial Buildings Energy Consumption Survey or FAX to: co Westat, Inc. 1-301-251-2257 1650 Research Blvd. Rockville, MD 20850-9973 Form EIA-871E-A (81297) Form Approval ...

  15. C:\\MYDOCS\\CBECS-~1\\CBECSFRM\\NGASDSM2.FRM

    U.S. Energy Information Administration (EIA) Indexed Site

    Don't Know ) SKIP TO QUESTION 4 Form EIA-871C-B (81397) Form Approval Natural Gas DSM ... envelope or shell conservation program b. Yes No Don't Know Not Offered c. ...

  16. C:\\MYDOCS\\CBECS-~1\\CBECSFRM\\NEWGASB.WPD

    U.S. Energy Information Administration (EIA) Indexed Site

    Commercial Buildings Energy Consumption Survey or FAX to: co Westat, Inc. 1-301-251-2257 1650 Research Blvd. Rockville, MD 20850-9973 Form EIA-871C-A (81397) Form Approval ...

  17. C:\\MYDOCS\\CBECS-FORM\\CBECSFRM\\GASIN952.WPD

    U.S. Energy Information Administration (EIA) Indexed Site

    C (081297) Form Approval OMB No.: 1905-0145 Expires: July 31,1998 IF YOU HAVE ANY ... Instructions Booklet for Schedule A - Building Natural Gas Usage Form (Form EIA-871C-A) ...

  18. C:\\MYDOCS\\CBECS-~1\\CBECSFRM\\FUELOIL3.NEW

    U.S. Energy Information Administration (EIA) Indexed Site

    Commercial Buildings Energy Consumption Survey or FAX to: co Westat, Inc. 1-301-251-2257 1650 Research Blvd. Rockville, MD 20850-9973 Form EIA-871F (81397) Form Approval Fuel ...

  19. C:\\MYDOCS\\CBECS-~1\\CBECSFRM\\DSTHT4.pdf

    U.S. Energy Information Administration (EIA) Indexed Site

    Commercial Buildings Energy Consumption Survey or FAX to: co Westat, Inc. 1-301-251-2257 1650 Research Blvd. Rockville, MD 20850-9973 Form EIA-871D (81397) Form Approval ...

  20. Report on Water Data Collection in the 2007 CBECS

    Gasoline and Diesel Fuel Update (EIA)

    -224,415 -196,460 -205,085 -201,403 -213,659 -206,750 2005-2016 PADD 1 -17,942 -14,705 -15,325 -15,088 -16,507 -15,534 2005-2016 East Coast -17,889 -14,746 -15,326 -15,154 -16,492 -15,493 2005-2016 Appalachian No. 1 -53 41 1 66 -15 -41 2005-2016 PADD 2 -56,553 -48,250 -48,728 -44,224 -48,504 -47,699 2005-2016 Ind., Ill. and Ky. -36,491 -32,814 -31,456 -27,909 -31,097 -30,704 2005-2016 Minn., Wis., N. Dak., S. Dak. -7,599 -5,879 -6,476 -5,086 -5,818 -5,937 2005-2016 Okla., Kans., Mo. -12,463

  1. 2007 CBECS Large Hospital Building List of Tables

    Gasoline and Diesel Fuel Update (EIA)

    Energy Supply Crude Oil Production (a) (million barrels per day) ......................... 9.48 9.50 9.43 9.32 9.17 8.87 8.45 8.44 8.42 8.36 8.16 8.29 9.43 8.73 8.31 Dry Natural Gas Production (billion cubic feet per day) ..................... 73.41 74.03 74.85 73.96 74.43 73.26 74.06 74.99 75.67 76.09 76.25 76.93 74.06 74.19 76.24 Coal Production (million short tons) ................................ 240 211 237 207 173 154 205 200 192 171 205 196 895 732 764 Energy Consumption Liquid Fuels

  2. Description of 2003 CBECS Detailed Tables and Categories of Data

    Gasoline and Diesel Fuel Update (EIA)

    floorspace heated, cooled, and lit, and energy-using equipment types (heating, cooling, water heating, lighting, and refrigeration). Tables C1-C12 and C1A-C12A contain energy usage...

  3. CBECS 1993 - Federal Buildings Supplement Survey - Detailed Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    Buildings Supplemental Survey. Divider Line To View andor Print Reports (requires Adobe Acrobat Reader) - Download Adobe Acrobat Reader If you experience any difficulties,...

  4. CBECS - Buildings and Energy in the 1980's, Table Titles

    U.S. Energy Information Administration (EIA) Indexed Site

    for primary or site energy ("p" or "s"). For example, Table R8.90p, shows primary energy data for residential buildings for the 1990 survey year. The tables are arranged into...

  5. 1992 CBECS C&E Table 3.29

    U.S. Energy Information Administration (EIA) Indexed Site

    per Square Foot and Load Factors, 1992 Building Characteristics RSE Column Factor: All Demand-Metered Buildings Peak Watts per Square Foot Load Factor RSE Row Factor Number of...

  6. CBECS 1992 - C&E Detailed Table Word Definitions

    U.S. Energy Information Administration (EIA) Indexed Site

    in the Northeast that used electricity as an energy source used 9.3 kilowatthours of electricity per square foot." Demand-Metered Buildings--Buildings that have meters to...

  7. CBECS 1989 - Energy End-use Intensities in Commercial Buildings...

    U.S. Energy Information Administration (EIA) Indexed Site

    the sampling error is nonzero and unknown for the particular sample chosen, the sample design permits sampling errors to be estimated. Due to the complexity of the sample design,...

  8. CBECS - Buildings and Energy in the 1980's - Detailed Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    Total Residential and Commercial Primary Consumption by Type of Building Sources: Energy Information Administration, Office of Energy Markets and End Use, EIA-457 of the 1980...

  9. C:\\MYDOCS\\CBECS-FORM\\CBECSFRM\\EDSMTRY.pdf

    U.S. Energy Information Administration (EIA) Indexed Site

    B (81297) Form Approval Electricity DSM Program Participation OMB No: 1905-0145 Expires: July 31, 1998 Label COMMERCIAL BUILDINGS ENERGY CONSUMPTION SURVEY FOR 1995 SCHEDULE B ) ...

  10. Category:CBECS Building Types | Open Energy Information

    Open Energy Info (EERE)

    E Education F Food Sales Food Service H Health Care (Inpatient) Health Care (Outpatient) L Lodging M Mercantile (Enclosed and Strip Malls) Mercantile (Retail Other Than Mall) O...

  11. Commercial Buildings Energy Consumption Survey (CBECS) - Analysis &

    Gasoline and Diesel Fuel Update (EIA)

    8,578 17,508 16,817 13,591 12,392 15,696 1989-2014 Federal Offshore U.S. 0 0 0 0 0 0 2005-2014 Pacific (California) 0 0 0 0 0 0 2005-2014 Gulf of Mexico (Louisiana & Alabama) 0 0 0 0 0 0 2005-2014 Gulf of Mexico (Texas) 0 0 0 0 0 0 2005-2014 Alaska 0 0 0 0 0 0 2005-2014 Lower 48 States 18,578 17,508 16,817 13,591 12,392 15,696 2005-2014 Alabama 1,342 1,298 1,210 1,006 413 978 1989-2014 Arkansas 22 28 21 10 13 15 2005-2014 California 0 0 0 0 0 0 2005-2014 Coastal Region Onshore 0 0 0 0 0 0

  12. Commercial Buildings Energy Consumption Survey (CBECS) - U.S. Energy

    Gasoline and Diesel Fuel Update (EIA)

    Information Administration (EIA) Survey Background and Technical Information Survey Background The commercial sector encompasses a vast range of building types-service businesses, such as retail and wholesale stores, hotels and motels, restaurants, and hospitals, as well as certain buildings that would not be considered "commercial" in a traditional economic sense, such as public and private schools, correctional institutions, and religious and fraternal organizations. Excluded

  13. Energy Information Administration (EIA)- CBECS Survey Background and

    Gasoline and Diesel Fuel Update (EIA)

    Technical Information Estimation of Standard Errors Sampling error is the difference between the survey estimate and the true population value due to the use of a random sample to estimate the population. This difference arises because a random subset, rather than the whole population, is observed. The typical magnitude of the sampling error is measured by the standard error of the estimate. The standard error is the root-mean-square difference between the estimate based on a particular

  14. GENERAL ASSIGNMENT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GEA Honors Geothermal Leaders GEA Honors Geothermal Leaders December 9, 2013 - 12:00am Addthis Washington, D.C. (December 9, 2013) The Geothermal Energy Association (GEA) has announced the winners for the GEA Honors, which recognize companies and individuals that have made significant contributions during the past year to advancing technology, spurring economic development and protecting the environment. The winners were selected in categories including Technological Advancement, Economic

  15. Method and system for assigning a confidence metric for automated determination of optic disc location

    DOE Patents [OSTI]

    Karnowski, Thomas P.; Tobin, Jr., Kenneth W.; Muthusamy Govindasamy, Vijaya Priya; Chaum, Edward

    2012-07-10

    A method for assigning a confidence metric for automated determination of optic disc location that includes analyzing a retinal image and determining at least two sets of coordinates locating an optic disc in the retinal image. The sets of coordinates can be determined using first and second image analysis techniques that are different from one another. An accuracy parameter can be calculated and compared to a primary risk cut-off value. A high confidence level can be assigned to the retinal image if the accuracy parameter is less than the primary risk cut-off value and a low confidence level can be assigned to the retinal image if the accuracy parameter is greater than the primary risk cut-off value. The primary risk cut-off value being selected to represent an acceptable risk of misdiagnosis of a disease having retinal manifestations by the automated technique.

  16. Commercial Buildings Energy Consumption and Expenditures 1992

    U.S. Energy Information Administration (EIA) Indexed Site

    in CBECS. In addition, the same customer may be classified differently by each of its energy suppliers. Activities with Large Amounts of Hot Water: One of the energy-related space...

  17. A Look at Health Care Buildings - Index Page

    U.S. Energy Information Administration (EIA) Indexed Site

    Health Care Home: A Look at CBECS Building Activities How large are they? How many employees are there? Where are they located? How old are they? Who owns and occupies them? Are...

  18. Balance Calibration A Method for Assigning a Direct-Reading Uncertainty to an Electronic Balance.

    SciTech Connect (OSTI)

    Mike Stears

    2010-07-01

    Paper Title: Balance Calibration A method for assigning a direct-reading uncertainty to an electronic balance. Intended Audience: Those who calibrate or use electronic balances. Abstract: As a calibration facility, we provide on-site (at the customers location) calibrations of electronic balances for customers within our company. In our experience, most of our customers are not using their balance as a comparator, but simply putting an unknown quantity on the balance and reading the displayed mass value. Manufacturers specifications for balances typically include specifications such as readability, repeatability, linearity, and sensitivity temperature drift, but what does this all mean when the balance user simply reads the displayed mass value and accepts the reading as the true value? This paper discusses a method for assigning a direct-reading uncertainty to a balance based upon the observed calibration data and the environment where the balance is being used. The method requires input from the customer regarding the environment where the balance is used and encourages discussion with the customer regarding sources of uncertainty and possible means for improvement; the calibration process becomes an educational opportunity for the balance user as well as calibration personnel. This paper will cover the uncertainty analysis applied to the calibration weights used for the field calibration of balances; the uncertainty is calculated over the range of environmental conditions typically encountered in the field and the resulting range of air density. The temperature stability in the area of the balance is discussed with the customer and the temperature range over which the balance calibration is valid is decided upon; the decision is based upon the uncertainty needs of the customer and the desired rigor in monitoring by the customer. Once the environmental limitations are decided, the calibration is performed and the measurement data is entered into a custom

  19. 1H, 13C, and 15N backbone and side chain resonance assignments of thermophilic Geobacillus kaustophilus cyclophilin-A

    SciTech Connect (OSTI)

    Holliday, Michael; Zhang, Fengli; Isern, Nancy G.; Armstrong, Geoffrey S.; Eisenmesser, Elan Z.

    2014-04-01

    Cyclophilins catalyze the reversible peptidyl-prolyl isomerization of their substrates and are present across all kingdoms of life from humans to bacteria. Although numerous biological roles have now been discovered for cyclophilins, their function was initially ascribed to their chaperone-like activity in protein folding where they catalyze the often rate-limiting step of proline isomerization. This chaperone-like activity may be especially important under extreme conditions where cyclophilins are often over expressed, such as in tumors for human cyclophilins {Lee, 2010 #1167}, but also in organisms that thrive under extreme conditions, such as theromophilic bacteria. Moreover, the reversible nature of the peptidyl-prolyl isomerization reaction catalyzed by cyclophilins has allowed these enzymes to serve as model systems for probing the role of conformational changes during catalytic turnover {Eisenmesser, 2002 #20;Eisenmesser, 2005 #203}. Thus, we present here the resonance assignments of a thermophilic cyclophilin from Geobacillus kaustophilus derived from deep-sea sediment {Takami, 2004 #1384}. This thermophilic cyclophilin may now be studied at a variety of temperatures to provide insight into the comparative structure, dynamics, and catalytic mechanism of cyclophilins.

  20. Arizona Map for Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Home > Households, Buildings & Industry > Background Information on CBECS > 1979-1999 CBECS climate zone map Corrections Corrections to 1979-1999 CBECS Climate Zone Map, February...

  1. The role of high-level calculations in the assignment of the Q-band spectra of chlorophyll

    SciTech Connect (OSTI)

    Reimers, Jeffrey R.; Cai, Zheng-Li; Kobayashi, Rika; Rtsep, Margus; Freiberg, Arvi; Krausz, Elmars

    2014-10-06

    We recently established a novel assignment of the visible absorption spectrum of chlorophyll-a that sees the two components Q{sub x} and Q{sub y} of the low-energy Q band as being intrinsically mixed by non-adiabatic coupling. This ended 50 years debate as to the nature of the Q bands, with prior discussion poised only in the language of the Born-Oppenheimer and Condon approximations. The new assignment presents significant ramifications for exciton transport and quantum coherence effects in photosystems. Results from state of the art electronic structure calculations have always been used to justify assignments, but quantitative inaccuracies and systematic failures have historically limited usefulness. We examine the role of CAM-B3LYP time-dependent density-functional theory (TD-DFT) and Symmetry Adapted Cluster-Configuration Interaction (SAC-CI) calculations in first showing that all previous assignments were untenable, in justifying the new assignment, in making some extraordinary predictions that were vindicated by the new assignment, and in then identifying small but significant anomalies in the extensive experimental data record.

  2. FOAM (Functional Ontology Assignments for Metagenomes): A Hidden Markov Model (HMM) database with environmental focus

    SciTech Connect (OSTI)

    Prestat, Emmanuel; David, Maude M.; Hultman, Jenni; Ta , Neslihan; Lamendella, Regina; Dvornik, Jill; Mackelprang, Rachel; Myrold, David D.; Jumpponen, Ari; Tringe, Susannah G.; Holman, Elizabeth; Mavromatis, Konstantinos; Jansson, Janet K.

    2014-09-26

    A new functional gene database, FOAM (Functional Ontology Assignments for Metagenomes), was developed to screen environmental metagenomic sequence datasets. FOAM provides a new functional ontology dedicated to classify gene functions relevant to environmental microorganisms based on Hidden Markov Models (HMMs). Sets of aligned protein sequences (i.e. ‘profiles’) were tailored to a large group of target KEGG Orthologs (KOs) from which HMMs were trained. The alignments were checked and curated to make them specific to the targeted KO. Within this process, sequence profiles were enriched with the most abundant sequences available to maximize the yield of accurate classifier models. An associated functional ontology was built to describe the functional groups and hierarchy. FOAM allows the user to select the target search space before HMM-based comparison steps and to easily organize the results into different functional categories and subcategories. FOAM is publicly available at http://portal.nersc.gov/project/m1317/FOAM/.

  3. Infrared and Raman spectra, DFT-calculations and spectral assignments of germacyclohexane

    SciTech Connect (OSTI)

    Aleksa, V. Ozerenskis, D.; Pucetaite, M.; Sablinskas, V.; Cotter, C.; Guirgis, G. A.

    2015-03-30

    Raman spectra of germacyclohexane in liquid and solid states were recorded and depolarization data obtained. Infrared absorption spectra of the vapor and liquid have been studied. The wavenumbers of the vibrational modes were derived in the harmonic and anharmonic approximation in B3LYP/ccpVTZ calculations. According to the calculations, germacyclohexane exists in the stable chair conformation, whereas a possible twist form should have more than 15 kJ·mol{sup -1} higher enthalpy of formation what makes this conformer experimentally not observable. The 27 A' and 21 A'' fundamentals were assigned on the basis of the calculations and infrared and Raman band intensities, contours of gas phase infrared spectral bands and Raman depolarization measurements. An average discrepancy of ca. 0.77 % was found between the observed and the calculated anharmonic wavenumbers for the 48 modes. Substitution of carbon atom with Ge atom in the cyclohexane ring is reasoning flattening of the ring.

  4. Spatial assignment of symmetry adapted perturbation theory interaction energy components: The atomic SAPT partition

    SciTech Connect (OSTI)

    Parrish, Robert M.; Sherrill, C. David

    2014-07-28

    We develop a physically-motivated assignment of symmetry adapted perturbation theory for intermolecular interactions (SAPT) into atom-pairwise contributions (the A-SAPT partition). The basic precept of A-SAPT is that the many-body interaction energy components are computed normally under the formalism of SAPT, following which a spatially-localized two-body quasiparticle interaction is extracted from the many-body interaction terms. For electrostatics and induction source terms, the relevant quasiparticles are atoms, which are obtained in this work through the iterative stockholder analysis (ISA) procedure. For the exchange, induction response, and dispersion terms, the relevant quasiparticles are local occupied orbitals, which are obtained in this work through the Pipek-Mezey procedure. The local orbital atomic charges obtained from ISA additionally allow the terms involving local orbitals to be assigned in an atom-pairwise manner. Further summation over the atoms of one or the other monomer allows for a chemically intuitive visualization of the contribution of each atom and interaction component to the overall noncovalent interaction strength. Herein, we present the intuitive development and mathematical form for A-SAPT applied in the SAPT0 approximation (the A-SAPT0 partition). We also provide an efficient series of algorithms for the computation of the A-SAPT0 partition with essentially the same computational cost as the corresponding SAPT0 decomposition. We probe the sensitivity of the A-SAPT0 partition to the ISA grid and convergence parameter, orbital localization metric, and induction coupling treatment, and recommend a set of practical choices which closes the definition of the A-SAPT0 partition. We demonstrate the utility and computational tractability of the A-SAPT0 partition in the context of side-on cation-π interactions and the intercalation of DNA by proflavine. A-SAPT0 clearly shows the key processes in these complicated noncovalent interactions, in

  5. Active Project Justification Statement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Active Project Justification Statement Active Project Justification Statement As of: May 2016 Provides a table of Active Project Justification Statements Active Project Justification Statement (386.46 KB) More Documents & Publications All Active DOE Technical Standards Document Project Registration Number Assignments (Active) The Proposed Reaffirmations and Cancellations For Additional Information Contact: Jeffrey Feit phone: 301-903-0471 e-mail: jeffrey.feit@hq.doe.gov

  6. Assigning unique identification numbers to new user accounts and groups in a computing environment with multiple registries

    DOE Patents [OSTI]

    DeRobertis, Christopher V.; Lu, Yantian T.

    2010-02-23

    A method, system, and program storage device for creating a new user account or user group with a unique identification number in a computing environment having multiple user registries is provided. In response to receiving a command to create a new user account or user group, an operating system of a clustered computing environment automatically checks multiple registries configured for the operating system to determine whether a candidate identification number for the new user account or user group has been assigned already to one or more existing user accounts or groups, respectively. The operating system automatically assigns the candidate identification number to the new user account or user group created in a target user registry if the checking indicates that the candidate identification number has not been assigned already to any of the existing user accounts or user groups, respectively.

  7. FOAM (Functional Ontology Assignments for Metagenomes): A Hidden Markov Model (HMM) database with environmental focus

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Prestat, Emmanuel; David, Maude M.; Hultman, Jenni; Ta , Neslihan; Lamendella, Regina; Dvornik, Jill; Mackelprang, Rachel; Myrold, David D.; Jumpponen, Ari; Tringe, Susannah G.; et al

    2014-09-26

    A new functional gene database, FOAM (Functional Ontology Assignments for Metagenomes), was developed to screen environmental metagenomic sequence datasets. FOAM provides a new functional ontology dedicated to classify gene functions relevant to environmental microorganisms based on Hidden Markov Models (HMMs). Sets of aligned protein sequences (i.e. ‘profiles’) were tailored to a large group of target KEGG Orthologs (KOs) from which HMMs were trained. The alignments were checked and curated to make them specific to the targeted KO. Within this process, sequence profiles were enriched with the most abundant sequences available to maximize the yield of accurate classifier models. An associatedmore » functional ontology was built to describe the functional groups and hierarchy. FOAM allows the user to select the target search space before HMM-based comparison steps and to easily organize the results into different functional categories and subcategories. FOAM is publicly available at http://portal.nersc.gov/project/m1317/FOAM/.« less

  8. Quantitative IR Spectrum and Vibrational Assignments for Glycolaldehyde Vapor: Glycolaldehyde Measurements in Biomass Burning Plumes

    SciTech Connect (OSTI)

    Johnson, Timothy J.; Sams, Robert L.; Profeta, Luisa T.; Akagi, Sheryl; Burling, Ian R.; Yokelson, Robert J.; Williams, Stephen D.

    2013-04-15

    Glycolaldehyde (GA, 2-hydroxyethanal, C2H4O2) is a semi-volatile molecule of atmospheric importance, recently proposed as a precursor in the formation of aqueous-phase secondary organic aerosol (SOA). There are few methods to measure glycolaldehyde vapor, but infrared spectroscopy has been used successfully. Using vetted protocols we have completed the first assignment of all fundamental vibrational modes and derived quantitative IR absorption band strengths using both neat and pressure-broadened GA vapor. Even though GA is problematic due to its propensity to both dimerize and condense, our intensities agree well with the few previously published values. Using the reference ?10 band Q-branch at 860.51 cm-1, we have also determined GA mixing ratios in biomass burning plumes generated by field and laboratory burns of fuels from the southeastern and southwestern United States, including the first field measurements of glycolaldehyde in smoke. The GA emission factors were anti-correlated with modified combustion efficiency confirming release of GA from smoldering combustion. The GA emission factors (g of GA emitted per kg dry biomass burned on a dry mass basis) had a low dependence on fuel type consistent with the production mechanism being pyrolysis of cellulose. GA was emitted at 0.23 0.13% of CO from field fires and we calculate that it accounts for ~18% of the aqueous-phase SOA precursors that we were able to measure.

  9. Laboratory evaluation of dynamic traffic assignment systems: Requirements, framework, and system design

    SciTech Connect (OSTI)

    Miaou, S.-P.; Pillai, R.S.; Summers, M.S.; Rathi, A.K.; Lieu, H.C.

    1997-01-01

    The success of Advanced Traveler Information 5ystems (ATIS) and Advanced Traffic Management Systems (ATMS) depends on the availability and dissemination of timely and accurate estimates of current and emerging traffic network conditions. Real-time Dynamic Traffic Assignment (DTA) systems are being developed to provide the required timely information. The DTA systems will provide faithful and coherent real-time, pre-trip, and en-route guidance/information which includes routing, mode, and departure time suggestions for use by travelers, ATIS, and ATMS. To ensure the credibility and deployment potential of such DTA systems, an evaluation system supporting all phases of DTA system development has been designed and presented in this paper. This evaluation system is called the DTA System Laboratory (DSL). A major component of the DSL is a ground- truth simulator, the DTA Evaluation System (DES). The DES is envisioned to be a virtual representation of a transportation system in which ATMS and ATIS technologies are deployed. It simulates the driving and decision-making behavior of travelers in response to ATIS and ATMS guidance, information, and control. This paper presents the major evaluation requirements for a DTA Systems, a modular modeling framework for the DES, and a distributed DES design. The modeling framework for the DES is modular, meets the requirements, can be assembled using both legacy and independently developed modules, and can be implemented as a either a single process or a distributed system. The distributed design is extendible, provides for the optimization of distributed performance, and object-oriented design within each distributed component. A status report on the development of the DES and other research applications is also provided.

  10. Acquisition Guide Chapter 4.6- Assigning Identifying Numbers Outside of the Strategic Integrated Procurement Enterprise System (STRIPES)

    Broader source: Energy.gov [DOE]

    The subject guide chapter provides guidance on the DOE's procedures for assigning identifying numbers to all new requisitions, solicitations and business instruments processed outside of STRIPES. This Guide Chapter does not apply to instrument numbers issued and business instruments awarded prior to the deployment of STRIPES at the DOE.

  11. Arranging Prescription Drug Coverage for Extended Stays (Travel or Long-Term Work Assignments) When Outside the United States

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Arranging Prescription Drug Coverage for Extended Stays (Travel or Long-Term Work Assignments) When Outside the United States Planning an extended vacation or working abroad? rx_lanl_override_0311 Maintaining prescription coverage and accessing care for long-term stays abroad What you need to know about override requests and obtaining Rx drugs. Your BCBSNM prescription drug coverage limits override requests to a 90-day supply. Override requests cannot be approved - and are not available -

  12. U.S. Energy Information Administration (EIA) Indexed Site

    Appendix A. 1989 CBECS Data File Documentation File 2: Building Activity (CBECS89.A02) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format CASEID Building identifier BLDGID4 1- 5 Census region REGION4 7- 7 $REGION. Census division CENDIV4 9- 9 $CENDIV. B2 Square footage SQFTC4 11- 12 $SQFTC. Principal building activity PBA4 14- 15 $ACTIVTY. B6A Percent vacant VACP4 17- 19 MISS3CH. B7A1 First previous/intended activity VACBA14 21- 22 $ACTIVTY. B7A2 Second

  13. METHODOLOGY AND CALCULATIONS FOR THE ASSIGNMENT OF WASTE GROUPS FOR THE LARGE UNDERGROUND WASTE STORAGE TANKS AT THE HANFORD SITE

    SciTech Connect (OSTI)

    WEBER RA

    2009-01-16

    The Hanford Site contains 177 large underground radioactive waste storage tanks (28 double-shell tanks and 149 single-shell tanks). These tanks are categorized into one of three waste groups (A, B, and C) based on their waste and tank characteristics. These waste group assignments reflect a tank's propensity to retain a significant volume of flammable gases and the potential of the waste to release retained gas by a buoyant displacement gas release event. Assignments of waste groups to the 177 double-shell tanks and single-shell tanks, as reported in this document, are based on a Monte Carlo analysis of three criteria. The first criterion is the headspace flammable gas concentration following release of retained gas. This criterion determines whether the tank contains sufficient retained gas such that the well-mixed headspace flammable gas concentration would reach 100% of the lower flammability limit if the entire tank's retained gas were released. If the volume of retained gas is not sufficient to reach 100% of the lower flammability limit, then flammable conditions cannot be reached and the tank is classified as a waste group C tank independent of the method the gas is released. The second criterion is the energy ratio and considers whether there is sufficient supernatant on top of the saturated solids such that gas-bearing solids have the potential energy required to break up the material and release gas. Tanks that are not waste group C tanks and that have an energy ratio < 3.0 do not have sufficient potential energy to break up material and release gas and are assigned to waste group B. These tanks are considered to represent a potential induced flammable gas release hazard, but no spontaneous buoyant displacement flammable gas release hazard. Tanks that are not waste group C tanks and have an energy ratio {ge} 3.0, but that pass the third criterion (buoyancy ratio < 1.0, see below) are also assigned to waste group B. Even though the designation as a waste

  14. METHODOLOGY AND CALCULATIONS FOR THE ASSIGNMENT OF WASTE GROUPS FOR THE LARGE UNDERGROUND WASTE STORAGE TANKS AT THE HANFORD SITE

    SciTech Connect (OSTI)

    FOWLER KD

    2007-12-27

    This document categorizes each of the large waste storage tanks into one of several categories based on each tank's waste characteristics. These waste group assignments reflect a tank's propensity to retain a significant volume of flammable gases and the potential of the waste to release retained gas by a buoyant displacement event. Revision 7 is the annual update of the calculations of the flammable gas Waste Groups for DSTs and SSTs. The Hanford Site contains 177 large underground radioactive waste storage tanks (28 double-shell tanks and 149 single-shell tanks). These tanks are categorized into one of three waste groups (A, B, and C) based on their waste and tank characteristics. These waste group assignments reflect a tank's propensity to retain a significant volume of flammable gases and the potential of the waste to release retained gas by a buoyant displacement gas release event. Assignments of waste groups to the 177 double-shell tanks and single-shell tanks, as reported in this document, are based on a Monte Carlo analysis of three criteria. The first criterion is the headspace flammable gas concentration following release of retained gas. This criterion determines whether the tank contains sufficient retained gas such that the well-mixed headspace flammable gas concentration would reach 100% of the lower flammability limit if the entire tank's retained gas were released. If the volume of retained gas is not sufficient to reach 100% of the lower flammability limit, then flammable conditions cannot be reached and the tank is classified as a waste group C tank independent of the method the gas is released. The second criterion is the energy ratio and considers whether there is sufficient supernatant on top of the saturated solids such that gas-bearing solids have the potential energy required to break up the material and release gas. Tanks that are not waste group C tanks and that have an energy ratio < 3.0 do not have sufficient potential energy to break up

  15. A Bayesian method for using simulator data to enhance human error probabilities assigned by existing HRA methods

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Groth, Katrina M.; Smith, Curtis L.; Swiler, Laura P.

    2014-04-05

    In the past several years, several international agencies have begun to collect data on human performance in nuclear power plant simulators [1]. This data provides a valuable opportunity to improve human reliability analysis (HRA), but there improvements will not be realized without implementation of Bayesian methods. Bayesian methods are widely used in to incorporate sparse data into models in many parts of probabilistic risk assessment (PRA), but Bayesian methods have not been adopted by the HRA community. In this article, we provide a Bayesian methodology to formally use simulator data to refine the human error probabilities (HEPs) assigned by existingmore » HRA methods. We demonstrate the methodology with a case study, wherein we use simulator data from the Halden Reactor Project to update the probability assignments from the SPAR-H method. The case study demonstrates the ability to use performance data, even sparse data, to improve existing HRA methods. Furthermore, this paper also serves as a demonstration of the value of Bayesian methods to improve the technical basis of HRA.« less

  16. A Bayesian method for using simulator data to enhance human error probabilities assigned by existing HRA methods

    SciTech Connect (OSTI)

    Katrinia M. Groth; Curtis L. Smith; Laura P. Swiler

    2014-08-01

    In the past several years, several international organizations have begun to collect data on human performance in nuclear power plant simulators. The data collected provide a valuable opportunity to improve human reliability analysis (HRA), but these improvements will not be realized without implementation of Bayesian methods. Bayesian methods are widely used to incorporate sparse data into models in many parts of probabilistic risk assessment (PRA), but Bayesian methods have not been adopted by the HRA community. In this paper, we provide a Bayesian methodology to formally use simulator data to refine the human error probabilities (HEPs) assigned by existing HRA methods. We demonstrate the methodology with a case study, wherein we use simulator data from the Halden Reactor Project to update the probability assignments from the SPAR-H method. The case study demonstrates the ability to use performance data, even sparse data, to improve existing HRA methods. Furthermore, this paper also serves as a demonstration of the value of Bayesian methods to improve the technical basis of HRA.

  17. C:\\MYDOCS\\CBECS-~1\\CBECSFRM\\EI871EB2.NEW

    U.S. Energy Information Administration (EIA) Indexed Site

    Commercial Buildings Energy Consumption Survey or FAX to: co Westat, Inc. 1-301- 251-2257 ... program installation or retrofit b. Yes No Don't Know Not Offered c. ...

  18. T:\\ClearanceEMEUConsumption\\cbecs\\pubuse89\\txt\\layouts&formats...

    U.S. Energy Information Administration (EIA) Indexed Site

    41 MISS3CH. B6F Percent public order and safety PORDP4 43- 45 MISS3CH. B6G Percent out-patient health care HCOUTP4 47- 49 MISS3CH. B6H Percent industrial INDUSP4 51- 53 MISS3CH....

  19. T:\\ClearanceEMEUConsumption\\cbecs\\pubuse86\\txt\\cb86sasfmt&layout...

    Gasoline and Diesel Fuel Update (EIA)

    supplied STSUPL3 129- 129 XXSUPL. Hot water supplied HWSUPL3 131- 131 XXSUPL. I-4a ... supplied STSUPL3 134- 134 XXSUPL. Hot water supplied HWSUPL3 136- 136 XXSUPL. File 3: ...

  20. T:\\ClearanceEMEUConsumption\\cbecs\\pubuse89\\txt\\layouts&formats...

    Gasoline and Diesel Fuel Update (EIA)

    XXSUPL. C3D Energy used for domestic hot water WATR4 36- 36 XXSUPL. C3E Energy used for ... supplied STSUPL4 103- 103 XXSUPL. Hot water supplied HWSUPL4 105- 105 XXSUPL. Annual ...

  1. T:\ClearanceEMEUConsumption\cbecs\pubuse86\txt\cb86sasfmt&layout.txt

    U.S. Energy Information Administration (EIA) Indexed Site

    6/txt/cb86sasfmt&layout.txt[3/17/2009 4:43:14 PM] File 1: Summary File (cb86f01.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. Metropolitan statistical area MSA3 25- 25 $MSA. Climate zone CLIMATE3 27- 27 $CLIMAT. B-1 Square footage SQFT3 29- 35

  2. b11.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    Lodging Retail (Other Than Mall) Table B11. Selected Principal Building Activity: Part 1, Number of Buildings for Non- Mall Buildings, 2003 Principal Building Activity Number of Buildings (thousand) Health Care All Buildings* Education Food Sales Food Service Energy Information Administration 2003 Commercial Buildings Energy Consumption Survey: Building Characteristics Tables Released: June 2006 Next CBECS will be conducted in 2007 Inpatient Outpatient All Buildings*

  3. U.S. Climate Zones Map for Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Past Climate Zones U. S. Climate Zones for 1979-1999 CBECS: climate zone map Return to Climate Zones for 2003 CBECS Return to CBECS Home Page Note:Map updated with corrections,...

  4. METHODOLOGY & CALCULATIONS FOR THE ASSIGNMENT OF WASTE GROUPS FOR THE LARGE UNDERGROUND WASTE STORAGE TANKS AT THE HANFORD SITE

    SciTech Connect (OSTI)

    BARKER, S.A.

    2006-07-27

    Waste stored within tank farm double-shell tanks (DST) and single-shell tanks (SST) generates flammable gas (principally hydrogen) to varying degrees depending on the type, amount, geometry, and condition of the waste. The waste generates hydrogen through the radiolysis of water and organic compounds, thermolytic decomposition of organic compounds, and corrosion of a tank's carbon steel walls. Radiolysis and thermolytic decomposition also generates ammonia. Nonflammable gases, which act as dilutents (such as nitrous oxide), are also produced. Additional flammable gases (e.g., methane) are generated by chemical reactions between various degradation products of organic chemicals present in the tanks. Volatile and semi-volatile organic chemicals in tanks also produce organic vapors. The generated gases in tank waste are either released continuously to the tank headspace or are retained in the waste matrix. Retained gas may be released in a spontaneous or induced gas release event (GRE) that can significantly increase the flammable gas concentration in the tank headspace as described in RPP-7771. The document categorizes each of the large waste storage tanks into one of several categories based on each tank's waste characteristics. These waste group assignments reflect a tank's propensity to retain a significant volume of flammable gases and the potential of the waste to release retained gas by a buoyant displacement event. Revision 5 is the annual update of the methodology and calculations of the flammable gas Waste Groups for DSTs and SSTs.

  5. METHODOLOGY & CALCULATIONS FOR THE ASSIGNMENT OF WASTE FOR THE LARGE UNDERGROUND WASTE STORAGE TANKS AT THE HANFORD SITE

    SciTech Connect (OSTI)

    TU, T.A.

    2007-01-04

    Waste stored within tank farm double-shell tanks (DST) and single-shell tanks (SST) generates flammable gas (principally hydrogen) to varying degrees depending on the type, amount, geometry, and condition of the waste. The waste generates hydrogen through the radiolysis of water and organic compounds, thermolytic decomposition of organic compounds, and corrosion of a tank's carbon steel walls. Radiolysis and thermolytic decomposition also generates ammonia. Nonflammable gases, which act as dilutents (such as nitrous oxide), are also produced. Additional flammable gases (e.g., methane) are generated by chemical reactions between various degradation products of organic chemicals present in the tanks. Volatile and semi-volatile organic chemicals in tanks also produce organic vapors. The generated gases in tank waste are either released continuously to the tank headspace or are retained in the waste matrix. Retained gas may be released in a spontaneous or induced gas release event (GRE) that can significantly increase the flammable gas concentration in the tank headspace as described in RPP-7771, Flammable Gas Safety Isme Resolution. Appendices A through I provide supporting information. The document categorizes each of the large waste storage tanks into one of several categories based on each tank's waste and characteristics. These waste group assignments reflect a tank's propensity to retain a significant volume of flammable gases and the potential of the waste to release retained gas by a buoyant displacement event. Revision 6 is the annual update of the flammable gas Waste Groups for DSTs and SSTs.

  6. GALAXIES IN X-RAY GROUPS. I. ROBUST MEMBERSHIP ASSIGNMENT AND THE IMPACT OF GROUP ENVIRONMENTS ON QUENCHING

    SciTech Connect (OSTI)

    George, Matthew R.; Bundy, Kevin; Leauthaud, Alexie; Finoguenov, Alexis; Tinker, Jeremy; Lin, Yen-Ting; Mei, Simona; Kneib, Jean-Paul; Ilbert, Olivier; Aussel, Herve; Le Floc'h, Emeric; Behroozi, Peter S.; Busha, Michael T.; Capak, Peter; Coccato, Lodovico; Covone, Giovanni; Faure, Cecile; Fiorenza, Stephanie L.; and others

    2011-12-01

    Understanding the mechanisms that lead dense environments to host galaxies with redder colors, more spheroidal morphologies, and lower star formation rates than field populations remains an important problem. As most candidate processes ultimately depend on host halo mass, accurate characterizations of the local environment, ideally tied to halo mass estimates and spanning a range in halo mass and redshift, are needed. In this work, we present and test a rigorous, probabilistic method for assigning galaxies to groups based on precise photometric redshifts and X-ray-selected groups drawn from the COSMOS field. The groups have masses in the range 10{sup 13} {approx}< M{sub 200c}/M{sub Sun} {approx}< 10{sup 14} and span redshifts 0 < z < 1. We characterize our selection algorithm via tests on spectroscopic subsamples, including new data obtained at the Very Large Telescope, and by applying our method to detailed mock catalogs. We find that our group member galaxy sample has a purity of 84% and completeness of 92% within 0.5 R{sub 200c}. We measure the impact of uncertainties in redshifts and group centering on the quality of the member selection with simulations based on current data as well as future imaging and spectroscopic surveys. As a first application of our new group member catalog which will be made publicly available, we show that member galaxies exhibit a higher quenched fraction compared to the field at fixed stellar mass out to z {approx} 1, indicating a significant relationship between star formation and environment at group scales. We also address the suggestion that dusty star-forming galaxies in such groups may impact the high-l power spectrum of the cosmic microwave background and find that such a population cannot explain the low power seen in recent Sunyaev-Zel'dovich measurements.

  7. Warehouse and Storage | Open Energy Information

    Open Energy Info (EERE)

    References EIA CBECS Building Types 1 References EIA CBECS Building Types U.S. Energy Information Administration (Oct 2008) Retrieved from "http:en.openei.orgw...

  8. --No Title--

    U.S. Energy Information Administration (EIA) Indexed Site

    Appendix A. 1989 CBECS Data File Documentation File 3: Operating Hours and Weather (CBECS89.A03) Ques- tion- naire Variable Variable Variable Variable item Description Name ...

  9. Active-R filter

    DOE Patents [OSTI]

    Soderstrand, Michael A.

    1976-01-01

    An operational amplifier-type active filter in which the only capacitor in the circuit is the compensating capacitance of the operational amplifiers, the various feedback and coupling elements being essentially solely resistive.

  10. Eliminating livelock by assigning the same priority state to each message that is inputted into a flushable routing system during N time intervals

    DOE Patents [OSTI]

    Faber, Vance

    1994-01-01

    Livelock-free message routing is provided in a network of interconnected nodes that is flushable in time T. An input message processor generates sequences of at least N time intervals, each of duration T. An input register provides for receiving and holding each input message, where the message is assigned a priority state p during an nth one of the N time intervals. At each of the network nodes a message processor reads the assigned priority state and awards priority to messages with priority state (p-1) during an nth time interval and to messages with priority state p during an (n+1) th time interval. The messages that are awarded priority are output on an output path toward the addressed output message processor. Thus, no message remains in the network for a time longer than T.

  11. Eliminating livelock by assigning the same priority state to each message that is input into a flushable routing system during N time intervals

    DOE Patents [OSTI]

    Faber, V.

    1994-11-29

    Livelock-free message routing is provided in a network of interconnected nodes that is flushable in time T. An input message processor generates sequences of at least N time intervals, each of duration T. An input register provides for receiving and holding each input message, where the message is assigned a priority state p during an nth one of the N time intervals. At each of the network nodes a message processor reads the assigned priority state and awards priority to messages with priority state (p-1) during an nth time interval and to messages with priority state p during an (n+1) th time interval. The messages that are awarded priority are output on an output path toward the addressed output message processor. Thus, no message remains in the network for a time longer than T. 4 figures.

  12. Active DOE Technical Standards Managers

    Office of Environmental Management (EM)

    TECHNICAL STANDARDS PROGRAM ASSIGNMENT TELEPHONEFAXEMAIL NAME DOE FACILITYADDRESS LOC ... Central Technical Authority Chief, Nuclear Safety Sta - CTACNS 1000 Independence ...

  13. Safety assessment of historical masonry churches based on pre-assigned kinematic limit analysis, FE limit and pushover analyses

    SciTech Connect (OSTI)

    Milani, Gabriele Valente, Marco

    2014-10-06

    This study presents some results of a comprehensive numerical analysis on three masonry churches damaged by the recent Emilia-Romagna (Italy) seismic events occurred in May 2012. The numerical study comprises: (a) pushover analyses conducted with a commercial code, standard nonlinear material models and two different horizontal load distributions; (b) FE kinematic limit analyses performed using a non-commercial software based on a preliminary homogenization of the masonry materials and a subsequent limit analysis with triangular elements and interfaces; (c) kinematic limit analyses conducted in agreement with the Italian code and based on the a-priori assumption of preassigned failure mechanisms, where the masonry material is considered unable to withstand tensile stresses. All models are capable of giving information on the active failure mechanism and the base shear at failure, which, if properly made non-dimensional with the weight of the structure, gives also an indication of the horizontal peak ground acceleration causing the collapse of the church. The results obtained from all three models indicate that the collapse is usually due to the activation of partial mechanisms (apse, faade, lateral walls, etc.). Moreover the horizontal peak ground acceleration associated to the collapse is largely lower than that required in that seismic zone by the Italian code for ordinary buildings. These outcomes highlight that structural upgrading interventions would be extremely beneficial for the considerable reduction of the seismic vulnerability of such kind of historical structures.

  14. Network Activity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Statistics Network Activity Network Activity PDSF Network Uplinks to NERSC (dual 10 Gbps) NERSC Uplink to ESnet Last edited: 2011-03-31 22:20:59...

  15. Record of principal work activities/deliverables. Final technical report, September 28, 1984--September 27, 1989

    SciTech Connect (OSTI)

    Not Available

    1989-09-01

    Over the five year period of performance, thirteen task assignments were issued by the DOE to ARINC Research. During the two year base period seven tasks were assigned. Two task assignments were issued for each of the three consecutive one year option periods. Associated with all task assignments were multiple subtasks, some of which required significant effort. These subtasks are appropriately cited in this report under their respective task assignments as principal work activities or deliverables. The technical and management support provided to the DOE under this contract focused on two general areas: (1) appraisal activities and (2) non-appraisal activities. Support to appraisals included planning, document review, developing lines-of-inquiry, interviewing, data collection, report writing, and follow-up. Such work was executed both on-site at the DOE facility under review and off-site. Non-appraisal support was varied and included such areas as document review, data base development, technical assessments. statistical analysis, policy analysis, reliability engineering, and workshop and conference planning and execution.

  16. Activation detector

    DOE Patents [OSTI]

    Bell, Zane William [Oak Ridge, TN; Boatner, Lynn Allen [Oak Ridge, TN

    2009-12-08

    A method of detecting an activator, the method including impinging with an activator a receptor material lacking a photoluminescent material and generating a by-product of a radioactive decay due to the activator impinging the reeptor material. The method further including, generating light from the by-product via the Cherenkov effect and identifying a characteristic of the activator based on the light.

  17. Calcium/calcium chromate thermal battery and thermal battery assignment at the General Electric Neutron Devices Department

    SciTech Connect (OSTI)

    Neale, J.B.; Walton, R.D.

    1980-10-10

    A nontechnical overview of thermal battery design and fabrication methods is given, along with a description of the role of the General Electric Neutron Devices Department (GEND) in the Department of Energy's battery program. A thermal battery is a primary, reserve electrochemical power source; that is, it can be used only once and then for a relatively short period, measured in minutes. To energize the battery, an external electrical signal ignites a heat source in the battery to melt the electrolyte and initiate an electrochemical reaction. The battery is made up of several series-connected cells, each with an anode, a cathode, and a current collector. A cell's anode is calcium; its cathode is hexavalent chromium. The electrochemical reaction takes place when the electrolyte is melted by heat supplied from ignition of an iron-potassium perchlorate disk. Since no reaction occurs while the electrolyte is in the solid state, the battery does not deteriorate with time and has a shelf life exceeding 20 years. Presented are such critical battery operating characteristics as temperature, rise time, active life, current capacity, etc. Design factors described include size and shape, pellet density, ignition methods, anode construction, etc. These batteries are designed by Sandia National Laboratories, Albuquerque. GEND acts as a procurement agency and provides engineering support to suppliers. 18 figures.

  18. E-Division activities report

    SciTech Connect (OSTI)

    Barschall, H.H.

    1984-07-01

    E (Experimental Physics) Division carries out basic and applied research in atomic and nuclear physics, in materials science, and in other areas related to the missions of the Laboratory. Some of the activities are cooperative efforts with other divisions of the Laboratory, and, in a few cases, with other laboratories. Many of the experiments are directly applicable to problems in weapons and energy, some have only potential applied uses, and others are in pure physics. This report presents abstracts of papers published by E (Experimental Physics) Division staff members between July 1983 and June 1984. In addition, it lists the members of the scientific staff of the division, including visitors and students, and some of the assignments of staff members on scientific committees. A brief summary of the budget is included.

  19. Changes in Delegations of Authority from the Office of Human Capital

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Changes for the 2012 CBECS The proposed design, procedures, and forms for the 2012 CBECS reflect a number of changes from the 2007 CBECS. These changes include:  The sample size for the 2012 CBECS will be 50 percent larger relative to the previous CBECS. The increase in sample size will allow for: o Fewer suppressed cells in published tables, o Better capture of emerging energy phenomena, such as new technologies for on- site electricity generation, o Lower relative standard errors for key

  20. Energy Information Administration (EIA)- About the Commercial Buildings

    Gasoline and Diesel Fuel Update (EIA)

    Energy Consumption Survey (CBECS the 2012 CBECS Buildings Survey Conducted? CBECS 2012 - Release date: March 5, 2015 The Commercial Buildings Energy Consumption Survey (CBECS) project cycle spans at least four years, beginning with development of the sample frame and survey questionnaire and ending with release of data to the public. This set of three methodology documents provides details about each of the three major stages of the 2012 CBECS survey process. * How Were Buildings Selected

  1. b11.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    Table B11. Selected Principal Building Activity: Part 1, Number of Buildings for Non- Mall Buildings, 2003 Principal Building Activity Number of Buildings (thousand) Health Care All Buildings* Education Food Sales Food Service Lodging Retail (Other Than Mall) Energy Information Administration 2003 Commercial Buildings Energy Consumption Survey: Building Characteristics Tables Revised June 2006 81 Released: June 2006 Next CBECS will be conducted in 2007 Inpatient Outpatient All Buildings*

  2. Overseas Assignments | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This handbook covers all types of Federal employment overseas, including details, both within DOE as well as to other agencies; transfers to approved international organizations; ...

  3. JOBAID-ASSIGNING DELEGATES (SUPERVISOR)

    Broader source: Energy.gov [DOE]

    The purpose of this job aid is to guide you through the step-by-step process of isung the delegate feature within SuccessFactors Learning.

  4. Program Assignments | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Balanced Scorecard Program Officer Contractual Services Budget Officer Headquarters Purchase Card Program Headquarters Contract Closeout Headquarters Data Mining Programs Strategic ...

  5. Catalyst activator

    DOE Patents [OSTI]

    McAdon, Mark H.; Nickias, Peter N.; Marks, Tobin J.; Schwartz, David J.

    2001-01-01

    A catalyst activator particularly adapted for use in the activation of metal complexes of metals of Group 3-10 for polymerization of ethylenically unsaturated polymerizable monomers, especially olefins, comprising two Group 13 metal or metalloid atoms and a ligand structure including at least one bridging group connecting ligands on the two Group 13 metal or metalloid atoms.

  6. NbF{sub 5} and TaF{sub 5}: Assignment of {sup 19}F NMR resonances and chemical bond analysis from GIPAW calculations

    SciTech Connect (OSTI)

    Biswal, Mamata; Body, Monique; Legein, Christophe; Sadoc, Aymeric; Boucher, Florent

    2013-11-15

    The {sup 19}F isotropic chemical shifts (?{sub iso}) of two isomorphic compounds, NbF{sub 5} and TaF{sub 5}, which involve six nonequivalent fluorine sites, have been experimentally determined from the reconstruction of 1D {sup 19}F MAS NMR spectra. In parallel, the corresponding {sup 19}F chemical shielding tensors have been calculated using the GIPAW method for both experimental and DFT-optimized structures. Furthermore, the [M{sub 4}F{sub 20}] units of NbF{sub 5} and TaF{sub 5} being held together by van der Waals interactions, the relevance of Grimme corrections to the DFT optimization processes has been evaluated. However, the semi-empirical dispersion correction term introduced by such a method does not show any significant improvement. Nonetheless, a complete and convincing assignment of the {sup 19}F NMR lines of NbF{sub 5} and TaF{sub 5} is obtained, ensured by the linearity between experimental {sup 19}F ?{sub iso} values and calculated {sup 19}F isotropic chemical shielding ?{sub iso} values. The effects of the geometry optimizations have been carefully analyzed, confirming among other matters, the inaccuracy of the experimental structure of NbF{sub 5}. The relationships between the fluorine chemical shifts, the nature of the fluorine atoms (bridging or terminal), the position of the terminal ones (opposite or perpendicular to the bridging ones), the fluorine charges, the ionicity and the length of the MF bonds have been established. Additionally, for three of the {sup 19}F NMR lines of NbF{sub 5}, distorted multiplets, arising from {sup 1}J-coupling and residual dipolar coupling between the {sup 19}F and {sup 93}Nb nuclei, were simulated yielding to values of {sup 93}Nb{sup 19}F {sup 1}J-coupling for the corresponding fluorine sites. - Graphical abstract: The complete assignment of the {sup 19}F NMR lines of NbF{sub 5} and TaF{sub 5} allow establishing relationships between the {sup 19}F ?{sub iso} values, the nature of the fluorine atoms (bridging or

  7. sup 1 H and sup 31 P-NMR assignments of the non-exchangeable protons of the consensus acceptor exon:intron junction d(CpTpApCpApGpGpT)

    SciTech Connect (OSTI)

    Lown, J.W.; Chang, D.K.; Debart, F.; Rayner, B.; Imbach, J.L. )

    1986-06-01

    The consensus acceptor exon:intron junction d(CpTpApCpApGpGpT) has been synthesized by a modified phosphotriester method. The non-self complementary octamer exists in the single strand form in aqueous buffer at 20 degrees C as evidenced by temperature variable {sup 1}H-NMR and NOE measurements. The non-exchangeable proton assignments were secured using a combination of techniques including two-dimensional COSY, NOESY and the double quantum technique {sup 1}H-{sup 1}H-INADEQUATE as well as inversion recovery T1 experiments. The new technique of {sup 31}P-1H shift correlation is particularly valuable in removing certain ambiguities in the sugar proton assignments. Characteristic chemical shifts for the base protons which are determined by their immediate molecular environments are also useful in assignments. The consensus acceptor exon:intron junction adopts a random coil conformation in solution under the experimental conditions employed.

  8. Identification of a distinct type IV collagen. alpha. chain with restricted kidney distribution and assignment of its gene to the locus of X chromosome-linked Alport syndrome

    SciTech Connect (OSTI)

    Hostikka, S.L.; Hoeyhtyae, M.; Tryggvason, K. ); Eddy, R.L.; Byers, M.G.; Shows, T.B. )

    1990-02-01

    The authors have identified and extensively characterized a type IV collagen {alpha} chain, referred to as {alpha}5(IV). Four overlapping cDNA clones isolated contain an open reading frame for 543 amino acid residues of the carboxyl-terminal end of a collagenous domain, a 229-residue carboxyl-terminal noncollagenous domain, and 1201 base pairs coding for a 3{prime} untranslated region. The collagenous Gly-Xaa-Yaa repeat sequence has five imperfections that coincide with those in the corresponding region of the {alpha}1(IV) chain. The noncollagenous domain has 12 conserved cysteine residues and 83% and 63% sequence identity with the noncollagenous domains of the {alpha}1(IV) and {alpha}2(IV) chains, respectively. The {alpha}5(IV) chain has less sequence identity with the putative bovine {alpha}3(IV) and {alpha}4(IV) chains. Antiserum against an {alpha}5(IV) synthetic peptide stained a polypeptide chain of about 185 kDa by immunoblot analysis and immunolocalization of the chain in human kidney was almost completely restricted to the glomerulus. The gene was assigned to the Xq22 locus by somatic cell hybrids and in situ hybridization. This may be identical or close to the locus of the X chromosome-linked Alport syndrome that is believed to be a type IV collagen disease.

  9. Activity report

    SciTech Connect (OSTI)

    Yu, S W

    2008-08-11

    This report is aimed to show the author's activities to support the LDRD. The title is 'Investigation of the Double-C Behavior in the Pu-Ga Time-Temperature-Transformation Diagram' The sections are: (1) Sample Holder Test; (2) Calculation of x-ray diffraction patterns; (3) Literature search and preparing publications; (4) Tasks Required for APS Experiments; and (5) Communications.

  10. Laboratory Activities

    SciTech Connect (OSTI)

    Brown, Christopher F.; Serne, R. Jeffrey

    2008-01-17

    This chapter summarizes the laboratory activities performed by PNNLs Vadose Zone Characterization Project in support of the Tank Farm Vadose Zone Program, led by CH2M HILL Hanford Group, Inc. The results of these studies are contained in numerous reports (Lindenmeier et al. 2002; Serne et al. 2002a, 2002b, 2002c, 2002d, 2002e; Lindenmeier et al. 2003; Serne et al. 2004a, 2004b; Brown et al. 2005, 2006a, 2007; Serne et al. 2007) and have generated much of the data reported in Chapter 22 (Geochemistry-Contaminant Movement), Appendix G (Geochemistry-Contaminant Movement), and Cantrell et al. (2007, SST WMA Geochemistry Data Package in preparation). Sediment samples and characterization results from PNNLs Vadose Zone Characterization Project are also shared with other science and technology (S&T) research projects, such as those summarized in Chapter 12 (Associated Science Activities).

  11. Student research activities in the Technology Assessments Section of the Health and Safety Research Division, Summer 1980

    SciTech Connect (OSTI)

    Chester, R.O.; Roberts, D.A.

    1981-08-01

    Reports summarizing activities of students assigned to the Technology Assessments Section of the Health and Safety Research Division for the summer 1980 are presented. Unless indicated otherwise, each report was written by the student whose work is being described. For each student, the student's supervisor, the name of the program under which the student was brought to ORNL, the academic level of the student, and the name of the ORNL project to which the student was assigned are tabulated. The reports are presented in alphabetical order of the students' last names.

  12. a1.xls

    Gasoline and Diesel Fuel Update (EIA)

    Both can be accessed from the CBECS web site http:www.eia.doe.govemeucbecs. Note: Due ... Both can be accessed from the CBECS web site http:www.eia.doe.govemeucbecs. QData ...

  13. Management and integration of engineering and construction activities: Lessons learned from the AP1000{sup R} nuclear power plant China project

    SciTech Connect (OSTI)

    McCullough, M. C.; Ebeling-Koning, D.; Evans, M. C.

    2012-07-01

    The lessons learned during the early phase of design engineering and construction activities for the AP1000 China Project can be applied to any project involving multiple disciplines and multiple organizations. Implementation of a first-of-a-kind design to directly support construction activities utilizing resources assigned to design development and design delivery creates challenges with prioritization of activities, successful closure of issues, and communication between site organizations and the home office. To ensure successful implementation, teams were assigned and developed to directly support construction activities including prioritization of activities, site communication and ensuring closure of site emergent issues. By developing these teams, the organization is better suited to meet the demands of the construction schedule while continuing with design evolution of a standard plant and engineering delivery for multiple projects. For a successful project, proper resource utilization and prioritization are key for overcoming obstacles and ensuring success of the engineering organization. (authors)

  14. Categories of Data

    U.S. Energy Information Administration (EIA) Indexed Site

    Home > Households, Buildings & Industry > Commercial Buildings Energy Consumption Survey (CBECS) > 1995 Detailed Tables > Data Categories Column Categories | Row Categories |...

  15. Overview of Commercial Buildings, 2003 - Full Report

    U.S. Energy Information Administration (EIA) Indexed Site

    Introduction Home > Households, Buildings & Industry > Commercial Buildings Energy Consumption Survey (CBECS) > Overview of Commercial Buildings Print Report: PDF Overview of...

  16. Energy Information Administration (EIA)- Commercial Buildings Energy

    U.S. Energy Information Administration (EIA) Indexed Site

    Consumption Survey (CBECS) Data 03 CBECS Survey Data 2012 | 2003 | 1999 | 1995 | 1992 | Previous Building Characteristics Consumption & Expenditures Microdata Methodology Building Characteristics In the 2003 CBECS, the survey procedures for strip shopping centers and enclosed malls ("mall buildings") were changed from those used in previous surveys, and, as a result, mall buildings are now excluded from most of the 2003 CBECS tables. Therefore, some data in the majority of the

  17. Intermediate Energy Infobook Activities (29 Activities)

    K-12 Energy Lesson Plans and Activities Web site (EERE)

    Information about Intermediate Energy Infobook, 29 student activities on energy basics for grades 5-8.

  18. Energy Information Administration (EIA)- Commercial Buildings Energy

    U.S. Energy Information Administration (EIA) Indexed Site

    Consumption Survey (CBECS) Data 5 CBECS Survey Data 2012 | 2003 | 1999 | 1995 | 1992 | Previous Building Characteristics Consumption & Expenditures Microdata Methodology Building Characteristics Data from the 1995 Commercial Buildings Energy Consumption Survey (CBECS) are presented in three groups of detailed tables: Buildings Characteristics Tables, number of buildings and amount of floorspace for major building characteristics. Energy Consumption and Expenditures Tables, energy

  19. Energy Information Administration (EIA)- Commercial Buildings Energy

    U.S. Energy Information Administration (EIA) Indexed Site

    Consumption Survey (CBECS) Data 9 CBECS Survey Data 2012 | 2003 | 1999 | 1995 | 1992 | Previous Building Characteristics Consumption & Expenditures Microdata Methodology Building Characteristics Data from the 1999 Commercial Buildings Energy Consumption Survey (CBECS) are presented in the Building Characteristics tables, which include number of buildings and total floorspace for various Building Characteristics, and Consumption and Expenditures tables, which include energy usage figures

  20. Survey of the high resolution infrared spectrum of methane ({sup 12}CH{sub 4} and {sup 13}CH{sub 4}): Partial vibrational assignment extended towards 12000 cm{sup ?1}

    SciTech Connect (OSTI)

    Ulenikov, O. N.; Bekhtereva, E. S.; Albert, S.; Bauerecker, S.; Niederer, H. M.; Quack, M.

    2014-12-21

    We have recorded the complete infrared spectrum of methane {sup 12}CH{sub 4} and its second most abundant isotopomer {sup 13}CH{sub 4} extending from the fundamental range starting at 1000 cm{sup ?1} up to the overtone region near 12000 cm{sup ?1} in the near infrared at the limit towards the visible range, at temperatures of about 80 K and also at 298 K with Doppler limited resolution in the gas phase by means of interferometric Fourier transform spectroscopy using the Bruker IFS 125 HR prototype (ZP 2001) of the ETH Zrich laboratory. This provides the so far most complete data set on methane spectra in this range at high resolution. In the present work we report in particular those results, where the partial rovibrational analysis allows for the direct assignment of pure (J = 0) vibrational levels including high excitation. These results substantially extend the accurate knowledge of vibrational band centers to higher energies and provide a benchmark for both the comparison with theoretical results on the one hand and atmospheric spectroscopy on the other hand. We also present a simple effective Hamiltonian analysis, which is discussed in terms of vibrational level assignments and {sup 13}C isotope effects.

  1. Millimeter-wave optical double resonance schemes for rapid assignment of perturbed spectra, with applications to the C{sup ~} {sup 1}B{sub 2} state of SO{sub 2}

    SciTech Connect (OSTI)

    Park, G. Barratt E-mail: barratt.park@gmail.com; Womack, Caroline C.; Jiang, Jun; Field, Robert W.; Whitehill, Andrew R.; Ono, Shuhei

    2015-04-14

    Millimeter-wave detected, millimeter-wave optical double resonance (mmODR) spectroscopy is a powerful tool for the analysis of dense, complicated regions in the optical spectra of small molecules. The availability of cavity-free microwave and millimeter wave spectrometers with frequency-agile generation and detection of radiation (required for chirped-pulse Fourier-transform spectroscopy) opens up new schemes for double resonance experiments. We demonstrate a multiplexed population labeling scheme for rapid acquisition of double resonance spectra, probing multiple rotational transitions simultaneously. We also demonstrate a millimeter-wave implementation of the coherence-converted population transfer scheme for background-free mmODR, which provides a ∼10-fold sensitivity improvement over the population labeling scheme. We analyze perturbations in the C{sup ~} state of SO{sub 2}, and we rotationally assign a b{sub 2} vibrational level at 45 328 cm{sup −1} that borrows intensity via a c-axis Coriolis interaction. We also demonstrate the effectiveness of our multiplexed mmODR scheme for rapid acquisition and assignment of three predissociated vibrational levels of the C{sup ~} state of SO{sub 2} between 46 800 and 47 650 cm{sup −1}.

  2. Secondary Energy Infobook Activities (19 Activities)

    K-12 Energy Lesson Plans and Activities Web site (EERE)

    Information about Secondary Energy Infobook, 19 student activities on energy basics for grades 5-8 and 9-12.

  3. Activity Based Costing

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28

    Activity Based Costing (ABC) is method for developing cost estimates in which the project is subdivided into discrete, quantifiable activities or a work unit. This chapter outlines the Activity Based Costing method and discusses applicable uses of ABC.

  4. Retrieval Activities - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Farms Retrieval Activities Office of River Protection Tank Farms Retrieval Activities PHOENIX - Tank Monitoring Waste Treatment & Immobilization Plant 222-S Laboratory 242-A...

  5. Active stewardship: sustainable future

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Active stewardship: sustainable future Active stewardship: sustainable future Energy sustainability is a daunting task: How do we develop top-notch innovations with some of the ...

  6. MANAGING ENGINEERING ACTIVITIES FOR THE PLATEAU REMEDIATION CONTRACT - HANFORD

    SciTech Connect (OSTI)

    KRONVALL CM

    2011-01-14

    In 2008, the primary Hanford clean-up contract transitioned to the CH2MHill Plateau Remediation Company (CHPRC). Prior to transition, Engineering resources assigned to remediation/Decontamination and Decommissioning (D&D) activities were a part of a centralized engineering organization and matrixed to the performing projects. Following transition, these resources were reassigned directly to the performing project, with a loose matrix through a smaller Central Engineering (CE) organization. The smaller (10 FTE) central organization has retained responsibility for the overall technical quality of engineering for the CHPRC, but no longer performs staffing and personnel functions. As the organization has matured, there are lessons learned that can be shared with other organizations going through or contemplating performing a similar change. Benefits that have been seen from the CHPRC CE organization structure include the following: (1) Staff are closely aligned with the 'Project/facility' that they are assigned to support; (2) Engineering priorities are managed to be consistent with the 'Project/facility' priorities; (3) Individual Engineering managers are accountable for identifying staffing needs and the filling of staffing positions; (4) Budget priorities are managed within the local organization structure; (5) Rather than being considered a 'functional' organization, engineering is considered a part of a line, direct funded organization; (6) The central engineering organization is able to provide 'overview' activities and maintain independence from the engineering organizations in the field; and (7) The central engineering organization is able to maintain a stable of specialized experts that are able to provide independent reviews of field projects and day-to-day activities.

  7. Evaluation of Potential Impacts of Microbial Activity on Drift Chemistry

    SciTech Connect (OSTI)

    Y. Wang

    2004-11-18

    ''Evaluation of Potential Impacts of Microbial Activity on Drift Chemistry'' focuses on the potential for microbial communities that could be active in repository emplacement drifts to influence the in-drift bulk chemical environment. This report feeds analyses to support the inclusion or exclusion of features, events, and processes (FEPs) in the total system performance assessment (TSPA) for the license application (LA), but this work is not expected to generate direct feeds to the TSPA-LA. The purpose was specified by, and the evaluation was performed and is documented in accordance with, ''Technical Work Plan For: Near-Field Environment and Transport In-Drift Geochemistry Analyses'' (BSC 2004 [DIRS 172402], Section 2.1). This report addresses all of the FEPs assigned by the technical work plan (TWP), including the development of exclusion arguments for FEPs that are not carried forward to the TSPA-LA. Except for an editorial correction noted in Section 6.2, there were no other deviations from the TWP. This report documents the completion of all assigned tasks, as follows (BSC 2004 DIRS 172402, Section 1.2.1): (1) Perform analyses to evaluate the potential for microbial activity in the waste emplacement drift under the constraints of anticipated physical and chemical conditions. (2) Evaluate uncertainties associated with these analyses. (3) Determine whether the potential for microbes warrants a feed to TSPA-LA to account for predicted effects on repository performance. (4) Provide information to address the ''Yucca Mountain Review Plan, Final Report'' (NUREG-1804) (NRC 2003 [DIRS 163274]) and Key Technical Issues and agreements, as appropriate. (5) Develop information for inclusion or exclusion of FEPs.

  8. Weatherization and Intergovernmental Activities

    Broader source: Energy.gov [DOE]

    Weatherization and Intergovernmental Activities Annual Performance Results and Targets FY 2008 Congressional Budget

  9. Energy Information Administration (EIA)- About the Commercial Buildings

    Gasoline and Diesel Fuel Update (EIA)

    Energy Consumption Survey (CBECS) 1. Selected principal building activity: part 1, number of buildings, 2012 Released: May 2016 Number of buildings (thousand) Principal building activity All buildings Office Warehouse and storage Service Mercantile Religious worship Education Public assembly All buildings 5,557 1,012 796 619 602 412 389 352 Building floorspace (square feet) 1,001 to 5,000 2,777 532 380 372 250 174 143 162 5,001 to 10,000 1,229 230 180 143 143 111 51 77 10,001 to 25,000 884

  10. Energy Information Administration (EIA)- About the Commercial Buildings

    Gasoline and Diesel Fuel Update (EIA)

    Energy Consumption Survey (CBECS) 3. Selected principal building activity: part 2, number of buildings, 2012 Released: May 2016 Number of buildings (thousand) Principal building activity Health care Public order and safety All buildings Food service Food sales Lodging In- patient Out- patient All buildings 5,557 380 177 158 10 147 84 Building floorspace (square feet) 1,001 to 10,000 4,007 356 154 62 N 113 61 10,001 to 100,000 1,415 24 22 84 5 32 20 Over 100,000 136 N Q 12 5 2 2 Year