Powered by Deep Web Technologies
Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Advanced Network Toolkit for Assessments  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Network Toolkit for Assessments Network Toolkit for Assessments and Remote Mapping (ANTFARM) Uses existing information to passively map control systems networks and identify cyber security perimeters Control systems operators require a map of their energy control system network in order to identify its electronic security perimeter, critical to meeting the North American Electric Reliability Corporation's (NERC) Critical Infrastructure Protection (CIP) standards. However, purchasing active, online scanning tools specifically for network mapping can be costly, and these tools can disrupt control system function, causing system latency and possibly affecting power supply. The ANTFARM software tool enables system operators to remotely and

2

Bioenergy Assessment Toolkit  

NLE Websites -- All DOE Office Websites (Extended Search)

Bioenergy Assessment Toolkit Bioenergy Assessment Toolkit Anelia Milbrandt and Caroline Uriarte Produced under direction of the United States Agency for International Development by the National Renewable Energy Laboratory (NREL) under Interagency Agreement AEG-P-00-00003-00; Work for Others Agreement number 3010543; Task Numbers WFE2.1012, WFE2.1013, and WFE2.1014. Technical Report NREL/TP-6A20-56456 October 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. Contract No. DE-AC36-08GO28308 National Renewable Energy Laboratory 15013 Denver West Parkway Golden, CO 80401 303-275-3000 * www.nrel.gov Bioenergy Assessment Toolkit Anelia Milbrandt and Caroline Uriarte

3

Impact Assessment Toolkit | Open Energy Information  

Open Energy Info (EERE)

Impact Assessment Toolkit Impact Assessment Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

4

Impact Assessment Toolkit | Open Energy Information  

Open Energy Info (EERE)

Impact Assessment Toolkit Impact Assessment Toolkit (Redirected from Gateway:International/Economic and Environmental Impacts) Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other

5

Land Use Assessment Toolkit | Open Energy Information  

Open Energy Info (EERE)

Land Use Assessment Toolkit Land Use Assessment Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

6

Bioenergy Assessment Toolkit | Open Energy Information  

Open Energy Info (EERE)

Bioenergy Assessment Toolkit Bioenergy Assessment Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

7

Transportation Assessment Toolkit/Home | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Transportation Assessment Toolkit/Home < Transportation Assessment Toolkit Jump to: navigation, search Home Transport Topics Ask an Expert Training Contact us What are the key actions necessary to implementing a transportation system LEDS? Action 1: Evaluate the existing transport system Action 2: Develop BAU scenario Action 3: Assess opportunities Avoid-Shift-Improve framework of strategies Action 4: Develop alternative scenarios Action 5: Prioritize and plan Action 6: Implement and monitor Transportation Assessment Toolkit Train licensed.png Transportation Assessment Toolkit Information licensed.png Transportation Assessment Toolkit Learning licensed.png

8

Building Energy Assessment Toolkit | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Building Energy Assessment Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country

9

Transportation Assessment Toolkit | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Transportation Assessment Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country

10

Impact Assessment Toolkit | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Impact Assessment Toolkit Jump to: navigation, search Economic Community of West African States (ECOWAS) Clean Energy Gateway Home | About | News | Links | Help | Countries Benin | Burkina Faso | Cape Verde | Gambia | Ghana | Guinea| Guinea-Bissau | Ivory Coast | Liberia | Mali | Niger | Nigeria | Senegal | Sierra Leone | Togo Countries ECREEE light.JPG FBenin.png FBurkinaFaso.png FCapeVerde.png FGambia.png FGhana.png FGuinea.png FGuinea-Bissau.png Benin Burkina Faso Cape Verde Gambia Ghana Guinea Guinea-Bissau FIvoryCoast.png FLiberia.png FMali.png FNiger.png FNigeria.png FSenegal.png FSierraLeone.png FTogo.png

11

Security Assessment Simulation Toolkit (SAST) Final Report  

SciTech Connect

The Department of Defense Technical Support Working Group (DoD TSWG) investment in the Pacific Northwest National Laboratory (PNNL) Security Assessment Simulation Toolkit (SAST) research planted a technology seed that germinated into a suite of follow-on Research and Development (R&D) projects culminating in software that is used by multiple DoD organizations. The DoD TSWG technology transfer goal for SAST is already in progress. The Defense Information Systems Agency (DISA), the Defense-wide Information Assurance Program (DIAP), the Marine Corps, Office Of Naval Research (ONR) National Center For Advanced Secure Systems Research (NCASSR) and Office Of Secretary Of Defense International Exercise Program (OSD NII) are currently investing to take SAST to the next level. PNNL currently distributes the software to over 6 government organizations and 30 DoD users. For the past five DoD wide Bulwark Defender exercises, the adoption of this new technology created an expanding role for SAST. In 2009, SAST was also used in the OSD NII International Exercise and is currently scheduled for use in 2010.

Meitzler, Wayne D.; Ouderkirk, Steven J.; Hughes, Chad O.

2009-11-15T23:59:59.000Z

12

Validation of Power Output for the WIND Toolkit  

SciTech Connect

Renewable energy integration studies require wind data sets of high quality with realistic representations of the variability, ramping characteristics, and forecast performance for current wind power plants. The Wind Integration National Data Set (WIND) Toolkit is meant to be an update for and expansion of the original data sets created for the weather years from 2004 through 2006 during the Western Wind and Solar Integration Study and the Eastern Wind Integration Study. The WIND Toolkit expands these data sets to include the entire continental United States, increasing the total number of sites represented, and it includes the weather years from 2007 through 2012. In addition, the WIND Toolkit has a finer resolution for both the temporal and geographic dimensions. Three separate data sets will be created: a meteorological data set, a wind power data set, and a forecast data set. This report describes the validation of the wind power data set.

King, J.; Clifton, A.; Hodge, B. M.

2014-09-01T23:59:59.000Z

13

Category:LEDSGP Development Impacts Assessment Toolkits | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Category Edit History Facebook icon Twitter icon » Category:LEDSGP Development Impacts Assessment Toolkits Jump to: navigation, search Development Impacts Assessment Tools help country, regional, and local policymakers find tools and online resources to assess the impacts of low-emission development strategies (LEDS). These tools equip decision makers with information to explore policy options and build consensus with stakeholders to acheive low-emission development. LEDSGP/DIA-Toolkit Pages in category "LEDSGP Development Impacts Assessment Toolkits" The following 65 pages are in this category, out of 65 total.

14

Sustainable Land-use Impact Assessment Toolkit | Open Energy Information  

Open Energy Info (EERE)

Sustainable Land-use Impact Assessment Toolkit Sustainable Land-use Impact Assessment Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

15

SEMILAR: A Semantic Similarity Toolkit For Assessing Students' Natural Language Inputs  

E-Print Network (OSTI)

SEMILAR: A Semantic Similarity Toolkit For Assessing Students' Natural Language Inputs Vasile Rus to understand students' natural language responses. Accurate assessment of students' responses enables, & Graesser, in press). There are at least two different types of natural language assessments

Rus, Vasile

16

Category:LEDS Toolkit | Open Energy Information  

Open Energy Info (EERE)

Toolkit Toolkit Jump to: navigation, search This page contains toolkits meant to support the creation and implementation of a Low Emission Development Strategy. Pages in category "LEDS Toolkit" The following 14 pages are in this category, out of 14 total. A Agriculture Work Space/Tools B Bioenergy Assessment Toolkit Bioenergy Toolkit E Energy System and Scenario Analysis Toolkit F Financing Initiatives Toolkit G Greenhouse Gas Inventory Development Toolkit I Impact Assessment Toolkit L Land Use Assessment Toolkit Land-use Policy and Program Design Toolkit Land-use Scenario Analysis Toolkit M Market Analysis Toolkit P Policy and Program Design Toolkit S Sustainable Land-use Impact Assessment Toolkit T Transportation Assessment Toolkit Retrieved from "http://en.openei.org/w/index.php?title=Category:LEDS_Toolkit&oldid=332209

17

A toolkit for integrated deterministic and probabilistic assessment for hydrogen infrastructure.  

SciTech Connect

There has been increasing interest in using Quantitative Risk Assessment [QRA] to help improve the safety of hydrogen infrastructure and applications. Hydrogen infrastructure for transportation (e.g. fueling fuel cell vehicles) or stationary (e.g. back-up power) applications is a relatively new area for application of QRA vs. traditional industrial production and use, and as a result there are few tools designed to enable QRA for this emerging sector. There are few existing QRA tools containing models that have been developed and validated for use in small-scale hydrogen applications. However, in the past several years, there has been significant progress in developing and validating deterministic physical and engineering models for hydrogen dispersion, ignition, and flame behavior. In parallel, there has been progress in developing defensible probabilistic models for the occurrence of events such as hydrogen release and ignition. While models and data are available, using this information is difficult due to a lack of readily available tools for integrating deterministic and probabilistic components into a single analysis framework. This paper discusses the first steps in building an integrated toolkit for performing QRA on hydrogen transportation technologies and suggests directions for extending the toolkit.

Groth, Katrina; Tchouvelev, Andrei V.

2014-03-01T23:59:59.000Z

18

Alternative energy design toolkit  

E-Print Network (OSTI)

This thesis concerns the concepts, structure, and applications of the Alternative Energy Design Toolkit. The toolkit is aimed to provide a widely accessible, easy to use, flexible, yet powerful modeling environment for ...

Sukkasi, Sittha

2004-01-01T23:59:59.000Z

19

LEDSGP/Transportation Toolkit/Key Actions/Assess Opportunities | Open  

Open Energy Info (EERE)

Assess Opportunities Assess Opportunities < LEDSGP‎ | Transportation Toolkit‎ | Key Actions(Redirected from Transportation Toolkit/Key Actions/Assess Opportunities) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low-emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a way that complements existing climate and development goals in other sectors. Planners, researchers, and decision-makers should customize this LEDS implementation framework for the specific conditions of their transport

20

LEDSGP/Transportation Toolkit/Key Actions/Assess Opportunities | Open  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Key Actions/Assess Opportunities < LEDSGP‎ | Transportation Toolkit‎ | Key Actions Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a way that complements existing climate and development goals in other

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

REEEP Toolkits | Open Energy Information  

Open Energy Info (EERE)

REEEP Toolkits REEEP Toolkits Jump to: navigation, search Tool Summary Name: REEEP Toolkit Agency/Company /Organization: Renewable Energy and Energy Efficiency Partnership Sector: Energy Focus Area: Energy Efficiency, Renewable Energy Topics: Implementation, Low emission development planning, Policies/deployment programs, Resource assessment, Pathways analysis, Background analysis Resource Type: Dataset References: REEEP Toolkit [1] This article is a stub. You can help OpenEI by expanding it. Latest Toolkits Failed to load RSS feed from http://toolkits.reeep.org/rss.php|short|max=5: There was a problem during the HTTP request: 404 Not Found Source: http://toolkits.reeep.org/rss.php References ↑ "REEEP Toolkit" Retrieved from "http://en.openei.org/w/index.php?title=REEEP_Toolkits&oldid=384160"

22

News Release: Advanced Network Toolkit for Assessments and Remote Mapping (ANTFARM)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

No-Cost ANTFARM Tool Maps Control System Networks to Help Implement No-Cost ANTFARM Tool Maps Control System Networks to Help Implement Cyber Security Standards Funded under the Department of Energy's National SCADA Test Bed Program, Sandia National Laboratories recently released a new software tool that will aid energy utility owners in mapping and visualizing their control system networks-a critical first step in meeting the North American Electric Reliability Corporation's Critical Infrastructure Protection (NERC CIP) standards. The Advanced Network Toolkit for Assessments and Remote Mapping (ANTFARM) helps utilities meet NERC CIP-005, which requires that they identify their electronic security perimeter (ESP), inside which all critical cyber assets and external access points reside. By using a utility's existing network information and

23

Geospatial Toolkit | OpenEI  

Open Energy Info (EERE)

Toolkit Toolkit Dataset Summary Description The Geospatial Toolkit (GsT) is a map viewer developed by the National Renewable Energy Laboratory (NREL). The toolkit helps energy planners, project developers, researchers and others identify areas of a country that show good potential for renewable energy projects. The toolkit displays renewable energy data along with information about the geography, location of population centers, borders, and transportation and power infrastructure. Source NREL Date Released Unknown Date Updated January 03rd, 2011 (4 years ago) Keywords Geospatial Toolkit GIS NREL Oaxaca Data Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage Frequency Time Period License License Open Data Commons Public Domain Dedication and Licence (PDDL)

24

Geospatial Toolkit | Open Energy Information  

Open Energy Info (EERE)

Geospatial Toolkit Geospatial Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Geospatial Toolkit (GsT) Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Focus Area: Solar, Wind Phase: Determine Baseline Topics: Resource assessment Resource Type: Guide/manual, Software/modeling tools User Interface: Desktop Application Website: www.nrel.gov/applying_technologies/geospatial_toolkits.html Country: Afghanistan, Bangladesh, Bhutan, Brazil, China, El Salvador, Ghana, Guatemala, Honduras, India, Nepal, Nicaragua, Oaxaca, Pakistan, Sri Lanka, Turkey Cost: Free Southern Asia, Southern Asia, Southern Asia, South America, Eastern Asia, Central America, Western Africa, Central America, Central America, Southern Asia, Southern Asia, Central America, , Southern Asia, Southern Asia, Western Asia

25

The Extremes Toolkit (extRemes) Weather and Climate Applications  

E-Print Network (OSTI)

The Extremes Toolkit (extRemes) Weather and Climate Applications of Extreme Value Statistics Eric;The Extremes Toolkit (extRemes) Web Page http://www.assessment.ucar.edu/toolkit Acknowledgements 1. The Extremes Toolkit is funded by the National Science Foundation (NSF) through the NCAR Weather and Cli- mate

Gilleland, Eric

26

Geospatial Toolkit | Open Energy Information  

Open Energy Info (EERE)

Geospatial Toolkit Geospatial Toolkit (Redirected from Geospatial Toolkits) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Geospatial Toolkit (GsT) Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Focus Area: Solar, Wind Phase: Determine Baseline Topics: Resource assessment Resource Type: Guide/manual, Software/modeling tools User Interface: Desktop Application Website: www.nrel.gov/applying_technologies/geospatial_toolkits.html Country: Afghanistan, Bangladesh, Bhutan, Brazil, China, El Salvador, Ghana, Guatemala, Honduras, India, Nepal, Nicaragua, Oaxaca, Pakistan, Sri Lanka, Turkey Cost: Free Southern Asia, Southern Asia, Southern Asia, South America, Eastern Asia, Central America, Western Africa, Central America, Central America, Southern Asia, Southern Asia, Central America, , Southern Asia, Southern Asia, Western Asia

27

LEDSGP/Transportation Toolkit/Tools | Open Energy Information  

Open Energy Info (EERE)

Tools Tools < LEDSGP‎ | Transportation Toolkit Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Tools for Low-Emission Development Strategies in Transportation Use one of the search methods below to find tools for building sustainable, low-emission development strategies (LEDS) for your country's transportation system. These resources focus on strategies to limit air pollutants and greenhouse gas emissions. Learn more in the report on LEDS for transportation. Search Method: Category Keyword Choose one or more items from the following categories. Key Actions Implement & Monitor Evaluate System Create Baseline Assess Opportunities Develop Alternatives Prioritize & plan Strategies Resource Types Topics Regions Powered by OpenEI

28

Assessment of Combined Heat and Power Premium Power Applications...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Assessment of Combined Heat and Power Premium Power Applications in California, September 2008 Assessment of Combined Heat and Power Premium Power Applications in California,...

29

Geospatial Toolkit | Open Energy Information  

Open Energy Info (EERE)

Geospatial Toolkit Geospatial Toolkit (Redirected from GsT) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Geospatial Toolkit (GsT) Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Focus Area: Solar, Wind Phase: Determine Baseline Topics: Resource assessment Resource Type: Guide/manual, Software/modeling tools User Interface: Desktop Application Website: www.nrel.gov/applying_technologies/geospatial_toolkits.html Country: Afghanistan, Bangladesh, Bhutan, Brazil, China, El Salvador, Ghana, Guatemala, Honduras, India, Nepal, Nicaragua, Oaxaca, Pakistan, Sri Lanka, Turkey Cost: Free Southern Asia, Southern Asia, Southern Asia, South America, Eastern Asia, Central America, Western Africa, Central America, Central America, Southern Asia, Southern Asia, Central America, , Southern Asia, Southern Asia, Western Asia

30

The GridPACK toolkit for developing power grid simulations on high performance computing platforms  

Science Journals Connector (OSTI)

This paper describes the GridPACK framework, which is designed to help power grid engineers develop modeling software capable of running on high performance computers. The framework contains modules for setting up distributed power grid networks, ... Keywords: electric power grid, high performance computing, software frameworks

Bruce Palmer; William Perkins; Kevin Glass; Yousu Chen; Shuangshuang Jin; David Callahan

2013-11-01T23:59:59.000Z

31

GridPACK Toolkit for Developing Power Grid Simulations on High Performance Computing Platforms  

SciTech Connect

This paper describes the GridPACK framework, which is designed to help power grid engineers develop modeling software capable of running on todays high performance computers. The framework contains modules for setting up distributed power grid networks, assigning buses and branches with arbitrary behaviors to the network, creating distributed matrices and vectors, using parallel linear and non-linear solvers to solve algebraic equations, and mapping functionality to create matrices and vectors based on properties of the network. In addition, the framework contains additional functionality to support IO and to manage errors.

Palmer, Bruce J.; Perkins, William A.; Glass, Kevin A.; Chen, Yousu; Jin, Shuangshuang; Callahan, Charles D.

2013-11-30T23:59:59.000Z

32

Climate Change and Clean Energy Project (CEnergy) Toolkit | Open Energy  

Open Energy Info (EERE)

Climate Change and Clean Energy Project (CEnergy) Toolkit Climate Change and Clean Energy Project (CEnergy) Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Climate Change and Clean Energy Project (CEnergy) Toolkit Agency/Company /Organization: Clean Air Asia, International Resources Group (IRG), United States Agency for International Development (USAID), Ministry of Planning Sector: Land Focus Area: Greenhouse Gas, People and Policy, Transportation Topics: Background analysis, Baseline projection, Co-benefits assessment, - Environmental and Biodiversity, GHG inventory, Low emission development planning, -LEDS, Pathways analysis, Policies/deployment programs Website: cleanairinitiative.org/portal/toolkitLGUs Country: Philippines UN Region: South-Eastern Asia References: CEnergy Toolkit[1]

33

Residential Marketing Toolkit  

NLE Websites -- All DOE Office Websites (Extended Search)

Showerheads Residential Weatherization Performance Tested Comfort Systems Ductless Heat Pumps New Construction Residential Marketing Toolkit Retail Sales Allocation Tool...

34

Energy & Society Toolkit Appendices Toolkit Appendices  

E-Print Network (OSTI)

Table of Contents 1. Orders of Magnitude 3 2. Units and Conversion Factors 4 2.1. Distance 4 2.2. Area 4.3. Renewable Energy Resources 11 5.4. Emissions Factors 11 6. References 15 #12;Energy & Society Toolkit Toolkit Appendices 4 2. UNITS AND CONVERSION FACTORS 2.1. Distance 1 meter (m) = 3.281 feet (ft) = 39

Kammen, Daniel M.

35

LEDSGP/DIA-Toolkit | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/DIA-Toolkit < LEDSGP Jump to: navigation, search LEDSGP Logo.png Development Impacts Assessment Toolkit Home Tools Request Assistance Building Climate-Resilient Low Emission Development Strategies The Development Impacts Assessment Toolkit helps country, regional, and local policymakers find tools and resources to assess the impacts of and links between national development priorities and low emission development strategies (LEDS). This toolkit equips decision makers with information to explore policy options and build consensus with stakeholders to achieve low-emission development that supports national development objectives.

36

Geospatial Toolkit (GsT) Webinar | Open Energy Information  

Open Energy Info (EERE)

Geospatial Toolkit (GsT) Webinar Geospatial Toolkit (GsT) Webinar Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Geospatial Toolkit (GsT) Webinar Agency/Company /Organization: National Renewable Energy Laboratory, Centro de Energías Renovables (CER), United States Department of Energy Sector: Energy Topics: Resource assessment Resource Type: Maps, Software/modeling tools, Webinar, Training materials Website: en.openei.org/wiki/GsT Equivalent URI: cleanenergysolutions.org/content/geospatial-toolkit-gst Language: English Policies: Deployment Programs DeploymentPrograms: Technical Assistance References: Geospatial Toolkit (GsT) Webinar[1] Logo: Geospatial Toolkit (GsT) Webinar This webinar provides an overview, and also demonstrates usage of the Geospatial Toolkit. Webinar Video

37

Bioenergy Toolkit | Open Energy Information  

Open Energy Info (EERE)

Bioenergy Toolkit Bioenergy Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

38

Probabilistic Wind Resource Assessment and Power Predictions  

E-Print Network (OSTI)

Probabilistic Wind Resource Assessment and Power Predictions Luca Delle Monache (lucadm Accurate wind resource assessment and power forecasts and reliable quanXficaXon of their uncertainty Mo5va5on · Power forecast: o Increase wind energy penetra

Firestone, Jeremy

39

Commercial Marketing Toolkit  

NLE Websites -- All DOE Office Websites (Extended Search)

Commercial-Marketing-Toolkit Sign In About | Careers | Contact | Investors | bpa.gov Search Policy & Reporting Expand Policy & Reporting EE Sectors Expand EE Sectors Technology...

40

Agricultural Marketing Toolkit  

NLE Websites -- All DOE Office Websites (Extended Search)

Agricultural-Marketing-Toolkit Sign In About | Careers | Contact | Investors | bpa.gov Search Policy & Reporting Expand Policy & Reporting EE Sectors Expand EE Sectors...

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

LEDSGP/Transportation Toolkit/Strategies | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Strategies < LEDSGP‎ | Transportation Toolkit(Redirected from Transportation Toolkit/Strategies) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Avoid, Shift, Improve Framework The avoid, shift, improve (ASI) framework enables development stakeholders to holistically design low emissions transport strategies by assessing opportunities to avoid the need for travel, shift to less carbon-intensive modes, and improve on conventional technologies, infrastructure, and policies. Avoid Trips and Reduce Travel Demand

42

HVDC power transmission technology assessment  

SciTech Connect

The purpose of this study was to develop an assessment of the national utility system`s needs for electric transmission during the period 1995-2020 that could be met by future reduced-cost HVDC systems. The assessment was to include an economic evaluation of HVDC as a means for meeting those needs as well as a comparison with competing technologies such as ac transmission with and without Flexible AC Transmission System (FACTS) controllers. The role of force commutated dc converters was to be assumed where appropriate. The assessment begins by identifying the general needs for transmission in the U.S. in the context of a future deregulated power industry. The possible roles for direct current transmission are then postulated in terms of representative scenarios. A few of the scenarios are illustrated with the help of actual U.S. system examples. non-traditional applications as well as traditional applications such as long lines and asynchronous interconnections are discussed. The classical ``break-even distance`` concept for comparing HVDC and ac lines is used to assess the selected scenarios. The impact of reduced-cost converters is reflected in terms of the break-even distance. This report presents a comprehensive review of the functional benefits of HVDC transmission and updated cost data for both ac and dc system components. It also provides some provocative thoughts on how direct current transmission might be applied to better utilize and expand our nation`s increasingly stressed transmission assets.

Hauth, R.L.; Tatro, P.J.; Railing, B.D. [New England Power Service Co., Westborough, MA (United States); Johnson, B.K.; Stewart, J.R. [Power Technologies, Inc., Schenectady, NY (United States); Fink, J.L.

1997-04-01T23:59:59.000Z

43

LEDSGP/DIA-Toolkit/Uses | Open Energy Information  

Open Energy Info (EERE)

Uses Uses < LEDSGP‎ | DIA-Toolkit Jump to: navigation, search LEDSGP Logo.png Development Impacts Assessment Toolkit Home Tools Request Assistance Ways to Use the Development Impacts Assessment Toolkit The Development Impacts Assessment (DIA) Toolkit offers a structured way to consider the impact of proposed low emission development strategies (LEDS) on other national or local priorities, and provides links to resources for conducting development impacts analysis. DIA can help in identifying impacts (which may be positive or negative), the extent of the impact, who is impacted, and the timeframe of the impact. DIA supports country efforts to reach development goals articulated in LEDS and elsewhere. Explore the DIA Concept This toolkit provides information on what is meant by DIA and how to

44

Category:Wind Working Group Toolkit | Open Energy Information  

Open Energy Info (EERE)

Wind Working Group Toolkit Wind Working Group Toolkit Jump to: navigation, search In 1999, the U.S. Department of Energy (DOE) launched the Wind Powering America (WPA) initiative to educate, engage, and enable critical stakeholders to make informed decisions about how wind energy contributes to the U.S. electricity supply. State Wind Working Groups used Wind Powering America's State Wind Working Group Handbook to serve their states, in conjunction with their own methods and outreach materials. This updated wiki-based Wind Working Group Toolkit provides links to information, methods, and resources. This wiki is a work in progress, and we welcome your contributions. See the Wind Working Group Toolkit home page for an outline of topics. Pages in category "Wind Working Group Toolkit"

45

LEDSGP/Transportation Toolkit/Strategies/Avoid | Open Energy Information  

Open Energy Info (EERE)

LEDSGP/Transportation Toolkit/Strategies/Avoid LEDSGP/Transportation Toolkit/Strategies/Avoid < LEDSGP‎ | Transportation Toolkit‎ | Strategies(Redirected from Transportation Toolkit/Strategies/Avoid) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Avoid, Shift, Improve Framework The avoid, shift, improve (ASI) framework enables development stakeholders to holistically design low-emission transport strategies by assessing opportunities to avoid the need for travel, shift to less carbon-intensive modes, and improve on conventional technologies, infrastructure, and policies. Avoid Trips and Reduce Travel Demand Transportation Assessment Toolkit Bikes Spain licensed cropped.jpg Avoid trips taken and reduce travel demand by integrating land use planning, transport infrastructure planning, and transport demand

46

Compliant mechanism learning toolkit  

E-Print Network (OSTI)

This thesis concerns a toolkit designed to assist in learning the behavior of complaint mechanisms. In the design of complaint mechanisms, increasingly complicated designs behave in ways that are harder to intuitively ...

Allard, Nicholas (Nicholas A.)

2006-01-01T23:59:59.000Z

47

Non-Powered Dams Resource Assessment | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Non-Powered Dams Resource Assessment Non-Powered Dams Resource Assessment 652011waterpowerpeerreviewnpdornloctober2011.pptx More Documents & Publications An...

48

Performance Based Service Acquisition Toolkit | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Procurement and Acquisition Guidance Contracting for Support Services Performance Based Service Acquisition Toolkit Performance Based Service Acquisition Toolkit...

49

Integrated: Geospatial Toolkit GIS data for India from NREL | OpenEI  

Open Energy Info (EERE)

India from NREL India from NREL Dataset Summary Description The Geospatial Toolkit (GsT) is a map viewer developed by the National Renewable Energy Laboratory (NREL). The toolkit helps energy planners, project developers, researchers and others identify areas of a country that show good potential for renewable energy projects. The toolkit displays renewable energy data along with information about the geography, location of population centers, borders, and transportation and power infrastructure. The toolkit is integrated with HOMER, a power system simulation and optimization model, originally developed at NREL and currently owned by HOMER Energy LLC. HOMER integration with the toolkit makes it possible to automatically populate HOMER inputs using weather data from the toolkit to help you get started with your HOMER analysis. The toolkit also displays preliminary HOMER results that you can see without running the model.

50

Integrated: Geospatial Toolkit GIS data for Oaxaca from NREL | OpenEI  

Open Energy Info (EERE)

Oaxaca from NREL Oaxaca from NREL Dataset Summary Description The Geospatial Toolkit (GsT) is a map viewer developed by the National Renewable Energy Laboratory (NREL). The toolkit helps energy planners, project developers, researchers and others identify areas of a country that show good potential for renewable energy projects. The toolkit displays renewable energy data along with information about the geography, location of population centers, borders, and transportation and power infrastructure. The toolkit is integrated with HOMER, a power system simulation and optimization model, originally developed at NREL and currently owned by HOMER Energy LLC. HOMER integration with the toolkit makes it possible to automatically populate HOMER inputs using weather data from the toolkit to help you get started with your HOMER analysis. The toolkit also displays preliminary HOMER results that you can see without running the model.

51

Integrated: Geospatial Toolkit GIS data for Bhutan from NREL | OpenEI  

Open Energy Info (EERE)

Bhutan from NREL Bhutan from NREL Dataset Summary Description The Geospatial Toolkit (GsT) is a map viewer developed by the National Renewable Energy Laboratory (NREL). The toolkit helps energy planners, project developers, researchers and others identify areas of a country that show good potential for renewable energy projects. The toolkit displays renewable energy data along with information about the geography, location of population centers, borders, and transportation and power infrastructure. The toolkit is integrated with HOMER, a power system simulation and optimization model, originally developed at NREL and currently owned by HOMER Energy LLC. HOMER integration with the toolkit makes it possible to automatically populate HOMER inputs using weather data from the toolkit to help you get started with your HOMER analysis. The toolkit also displays preliminary HOMER results that you can see without running the model.

52

TransportToolkit Prototype | Open Energy Information  

Open Energy Info (EERE)

TransportToolkit Prototype TransportToolkit Prototype Jump to: navigation, search Tool Summary Name: TransportToolkit Prototype Agency/Company /Organization: Nick Langle Complexity/Ease of Use: Not Available Cost: Free Related Tools Journal of Public Transportation Handbook for Handling, Storing, and Dispensing E85 Finalize Historic National Program to Reduce Greenhouse Gases and Improve Fuel Economy for Cars and Trucks ... further results Find Another Tool FIND TRANSPORTATION TOOLS This is a test tool to set values needed for Exhibit search results When to Use This Tool While building a low emission strategy for your country's transportation system, this tool is most useful during these key phases of the process: Evaluate System - Assessing the current transportation situation Create Baseline - Developing a business-as-usual scenario

53

NYSERDA-Wind Energy Toolkit | Open Energy Information  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » NYSERDA-Wind Energy Toolkit Jump to: navigation, search Tool Summary Name: NYSERDA-Wind Energy Toolkit Agency/Company /Organization: New York State Energy Research and Development Authority Sector: Energy Focus Area: Renewable Energy, Wind Topics: Resource assessment, Technology characterizations Website: www.powernaturally.org/Programs/Wind/Wind%20Energy%20Toolkit.pdf Cost: Free NYSERDA-Wind Energy Toolkit Screenshot References: NYSERDA[1] "The Wind Energy Toolkit was developed for the New York State Energy Research & Development Authority (NYSERDA) by AWS Truewind, LLC, to provide

54

Hands-on Energy Adaptation Toolkit (HEAT) | Open Energy Information  

Open Energy Info (EERE)

Hands-on Energy Adaptation Toolkit (HEAT) Hands-on Energy Adaptation Toolkit (HEAT) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Hands-on Energy Adaptation Toolkit (HEAT) Agency/Company /Organization: Energy Sector Management Assistance Program of the World Bank Sector: Energy Focus Area: Renewable Energy Topics: Adaptation, Implementation, Pathways analysis Resource Type: Guide/manual Website: esmap.org/esmap/node/312 Hands-on Energy Adaptation Toolkit (HEAT) Screenshot References: HEAT[1] Background "HEAT- A Hands-on Energy Adaptation Toolkit is designed to lead you through as assessment of climate vulnerabilities and adaptation options in the energy sector of your country. HEAT can help you raise awareness among key stakeholders and initiate dialogue on energy sector adaptation.

55

Geospatial Toolkits and Resource Maps for Selected Countries from the National Renewable Energy Laboratory (NREL)  

DOE Data Explorer (OSTI)

NREL developed the Geospatial Toolkit (GsT), a map-based software application that integrates resource data and geographic information systems (GIS) for integrated resource assessment. A variety of agencies within countries, along with global datasets, provided country-specific data. Originally developed in 2005, the Geospatial Toolkit was completely redesigned and re-released in November 2010 to provide a more modern, easier-to-use interface with considerably faster analytical querying capabilities. Toolkits are available for 21 countries and each one can be downloaded separately. The source code for the toolkit is also available. [Taken and edited from http://www.nrel.gov/international/geospatial_toolkits.html

56

A Stateful Web Augmentation Toolkit  

E-Print Network (OSTI)

This thesis introduces the Stateful Web Augmentation Toolkit (SWAT), a toolkit that gives users control over the presentation and functionality of web content. SWAT extends Chickenfoot, a Firefox browser scripting environment ...

Webber, Matthew J. (Matthew James)

2010-01-01T23:59:59.000Z

57

The model coupling toolkit.  

SciTech Connect

The advent of coupled earth system models has raised an important question in parallel computing: What is the most effective method for coupling many parallel models to form a high-performance coupled modeling system? We present our solution to this problem--The Model Coupling Toolkit (MCT). We explain how our effort to construct the Next-Generation Coupler for NCAR Community Climate System Model motivated us to create this toolkit. We describe in detail the conceptual design of the MCT and explain its usage in constructing parallel coupled models. We present preliminary performance results for the toolkit's parallel data transfer facilities. Finally, we outline an agenda for future development of the MCT.

Larson, J. W.; Jacob, R. L.; Foster, I.; Guo, J.

2001-04-13T23:59:59.000Z

58

DOE Hydrogen Analysis Repository: Powertrain Systems Analysis Toolkit  

NLE Websites -- All DOE Office Websites (Extended Search)

Powertrain Systems Analysis Toolkit (PSAT) Powertrain Systems Analysis Toolkit (PSAT) Project Summary Full Title: Powertrain Systems Analysis Toolkit (PSAT) Project ID: 122 Principal Investigator: Aymeric Rousseau Brief Description: PSAT is a forward-looking model that simulates fuel economy and performance in a realistic manner -- taking into account transient behavior and control system characteristics. It can simulate an unrivaled number of predefined configurations (conventional, electric, fuel cell, series hybrid, parallel hybrid, and power split hybrid). Keywords: Hybrid electric vehicles (HEV); fuel cell vehicles (FCV); vehicle characteristics Purpose Simulate performance and fuel economy of advanced vehicles to support U.S. DOE R&D activities Performer Principal Investigator: Aymeric Rousseau

59

LEDSGP/Transportation Toolkit/Strategies/Improve | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Strategies/Improve < LEDSGP‎ | Transportation Toolkit‎ | Strategies(Redirected from Transportation Toolkit/Strategies/Improve) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Avoid, Shift, Improve Framework The avoid, shift, improve (ASI) framework enables development stakeholders to holistically design low-emission transport strategies by assessing opportunities to avoid the need for travel, shift to less carbon-intensive modes, and improve on conventional technologies, infrastructure, and

60

Environmental Assessment for power marketing policy for Southwestern Power Administration  

SciTech Connect

Southwestern Power Administration (Southwestern) needs to renew expiring power sales contracts with new term (10 year) sales contracts. The existing contracts have been in place for several years and many will expire over the next ten years. Southwestern completed an Environmental Assessment on the existing power allocation in June, 1979 (a copy of the EA is attached), and there are no proposed additions of any major new generation resources, service to discrete major new loads, or major changes in operating parameters, beyond those included in the existing power allocation. Impacts from a no action plan, proposed alternative, and market power for less than 10 years are described.

Not Available

1993-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

LEDSGP/Transportation Toolkit/Strategies | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Strategies < LEDSGP‎ | Transportation Toolkit Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Avoid, Shift, Improve Framework The avoid, shift, improve (ASI) framework enables development stakeholders to holistically design low-emission transport strategies by assessing opportunities to avoid the need for travel, shift to less carbon-intensive modes, and improve on conventional technologies, infrastructure, and policies. Avoid Trips and Reduce Travel Demand Transportation Assessment Toolkit Bikes Spain licensed cropped.jpg

62

RAPID/BulkTransmission/Power Plant | Open Energy Information  

Open Energy Info (EERE)

BulkTransmissionPower Plant < RAPID | BulkTransmission Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA RAPID Toolkit About Bulk...

63

LEDSGP/Transportation Toolkit/Contact Us | Open Energy Information  

Open Energy Info (EERE)

Contact Us Contact Us < LEDSGP‎ | Transportation Toolkit Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Contacts for the LEDS GP Transport Working Group If you have questions or comments about the Transportation Toolkit, . Powered by OpenEI ledsgp.org is built on the same platform as the popular Wikipedia site. Like Wikipedia, it is a "wiki" or website developed collaboratively by a community of users. Thanks to our unique relationship with OpenEI.org, you can add or edit most content on ledsgp.org. For more information about this unique collaboration, contact us. View or edit this page on OpenEI.org. Retrieved from "http://en.openei.org/w/index.php?title=LEDSGP/Transportation_Toolkit/Contact_Us&oldid=690462

64

Afghanistan-NREL Resource Maps and Toolkits | Open Energy Information  

Open Energy Info (EERE)

Afghanistan-NREL Resource Maps and Toolkits Afghanistan-NREL Resource Maps and Toolkits Jump to: navigation, search Logo: Afghanistan Resources Maps and Toolkits Name Afghanistan Resources Maps and Toolkits Agency/Company /Organization National Renewable Energy Laboratory Sector Energy Focus Area Solar, Wind Topics Resource assessment, Background analysis Resource Type Dataset, Maps, Software/modeling tools Website http://www.nrel.gov/internatio Country Afghanistan Southern Asia References NREL International Activities Website [1] Abstract NREL partnered with Afghanistan to develop high-resolution wind and solar resource maps and data products for Afghanistan. NREL partnered with Afghanistan to develop high-resolution wind and solar resource maps and data products for Afghanistan. The data were output in

65

Property:TransportToolkit/Regions | Open Energy Information  

Open Energy Info (EERE)

Property Property Edit with form History Facebook icon Twitter icon » Property:TransportToolkit/Regions Jump to: navigation, search Property Name TransportToolkit/Regions Property Type String Description Transport Toolkit property to help filter pages Valid values are Africa & Middle East, Asia, Australia & North America, Europe, Latin America & Caribbean and Global Used in Form/Template Tool Allows Values Africa & Middle East;Asia;Australia & North America;Europe;Latin America & Caribbean;Global Pages using the property "TransportToolkit/Regions" Showing 6 pages using this property. A Africa's Transport Infrastructure Mainstreaming Maintenance and Management + Africa & Middle East + Assessment of the type of cycling infrastructure required to attract new cyclists + Australia & North America +

66

Cyber Security Audit and Attack Detection Toolkit: Bandolier and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cyber Security Audit and Attack Detection Toolkit: Bandolier and Cyber Security Audit and Attack Detection Toolkit: Bandolier and Portaledge, March 2010 Cyber Security Audit and Attack Detection Toolkit: Bandolier and Portaledge, March 2010 This project of the cyber security audit and attack detection toolkit will employ Bandolier Audit Files for optimizing security configurations and the Portaledge event detection capability for energy control systems. By building configuration audit and attack detection capabilities into tools already used by the energy sector, Bandolier and Portaledge offer energy asset owners low-cost and easily integrable control systems security solutions. Energy system operators can optimize the security of their control system configuration using Bandolier Security Audit Files, which assess the current configuration against an optimal security configuration.

67

World Bank Renewable Energy Toolkit | Open Energy Information  

Open Energy Info (EERE)

World Bank Renewable Energy Toolkit World Bank Renewable Energy Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: World Bank Renewable Energy Toolkit Agency/Company /Organization: World Bank Sector: Energy Focus Area: Renewable Energy, Solar, Wind Topics: Finance, Implementation, Market analysis, Policies/deployment programs, Resource assessment, Pathways analysis Resource Type: Publications, Guide/manual, Training materials, Lessons learned/best practices Website: web.worldbank.org/WBSITE/EXTERNAL/TOPICS/EXTENERGY2/EXTRENENERGYTK/0,, References: World Bank RE Toolkit Homepage [1] The Word Bank's REToolKit is designed "to assist Bank staff and country counterparts to improve the design and implementation of renewable energy (RE) projects, incorporates best practices and lessons learned from RE

68

Quarterly Cybersecurity Awareness Campaigns and Toolkits | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Quarterly Cybersecurity Awareness Campaigns and Toolkits Quarterly Cybersecurity Awareness Campaigns and Toolkits The OCIO coordinates a variety of internal cybersecurity awareness...

69

Integrated: Enhanced Geospatial Toolkit for Sri Lanka from NREL | OpenEI  

Open Energy Info (EERE)

Enhanced Geospatial Toolkit for Sri Lanka from NREL Enhanced Geospatial Toolkit for Sri Lanka from NREL Dataset Summary Description (Abstract): Stand-alone and easy to use geographic toolkit that allows non-GIS users to relate the renewable energy resource (solar and wind) data to other geographic data, such as land use, protected areas, elevation, etc. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): Enhancements to the GeoSpatial Toolkit (GsT) were funded by USAID's Southeast Asia Regional Initiative/Energy (SARI/E). These enhancements include additional functionality and data development not available with the standard GeoSpatial Toolkit.

70

LEDSGP/DIA-Toolkit/Factors | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/DIA-Toolkit/Factors < LEDSGP‎ | DIA-Toolkit Jump to: navigation, search LEDSGP Logo.png Development Impacts Assessment Toolkit Home Tools Request Assistance Development Impacts Assessment Dia goals actions.png Governments set national goals and priorities-social, economic, and environmental-that establish the context for government policies and programs. At the same time, many countries have defined low emission development strategies (LEDS) as a guiding framework for development. The purpose of development impacts assessment (DIA) is to identify and assess the impacts, including both positive impacts (e.g., improved air or

71

ASSESSING POWER PLANT COOLING WATER INTAKE SYSTEM  

E-Print Network (OSTI)

ASSESSING POWER PLANT COOLING WATER INTAKE SYSTEM ENTRAINMENT IMPACTS Prepared For: California, Center for Ocean Health, Long Marine Lab GREGOR CAILLIET, Moss Landing Marine Laboratories DAVID MAYER be obvious that large studies like these require the coordinated work of many people. We would first like

72

Community Wind Toolkit | Open Energy Information  

Open Energy Info (EERE)

Wind Toolkit Wind Toolkit Jump to: navigation, search "Community wind" refers to a class of wind energy ownership structures. Projects are considered "community" projects when they are at least partially owned by individuals or businesses in the state and local area surrounding the wind power project. The community element of these projects can be defined narrowly so that ownership is concentrated in the county or region where the project is built, or it may be defined broadly so that project investors are from the state where the project is sited. Furthermore, the extent of local ownership may range from a small minority share to full ownership by persons in the immediate area surrounding the wind project site. Potential project owners include local farmers,

73

LEDSGP/DIA-Toolkit/Tools | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/DIA-Toolkit/Tools < LEDSGP‎ | DIA-Toolkit Jump to: navigation, search LEDSGP Logo.png Development Impacts Assessment Toolkit Home Tools Request Assistance Tools for Assessing the Impacts of Low-Emission Development Use one of the search methods below to find tools for assessing the impacts of low emission development strategies (LEDS) on country development goals. These resources focus on strategies to reduce poverty, improve health and local environment quality, improve energy and water access, facilitate gender equity, and address other development priorities. If you are aware

74

LEDSGP/Transportation Toolkit/Strategies/Avoid | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Strategies/Avoid < LEDSGP‎ | Transportation Toolkit‎ | Strategies Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Avoid, Shift, Improve Framework The avoid, shift, improve (ASI) framework enables development stakeholders to holistically design low-emission transport strategies by assessing opportunities to avoid the need for travel, shift to less carbon-intensive modes, and improve on conventional technologies, infrastructure, and policies. Avoid Trips and Reduce Travel Demand Transportation Assessment Toolkit Bikes Spain licensed cropped.jpg

75

LEDSGP/Transportation Toolkit/Strategies/Improve | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Strategies/Improve < LEDSGP‎ | Transportation Toolkit‎ | Strategies Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Avoid, Shift, Improve Framework The avoid, shift, improve (ASI) framework enables development stakeholders to holistically design low emissions transport strategies by assessing opportunities to avoid the need for travel, shift to less carbon-intensive modes, and improve on conventional technologies, infrastructure, and policies. Avoid Trips and Reduce Travel Demand Transportation Assessment Toolkit Bikes Spain licensed cropped.jpg

76

Assessment of Large Combined Heat and Power Market, April 2004...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Large Combined Heat and Power Market, April 2004 Assessment of Large Combined Heat and Power Market, April 2004 This 2004 report summarizes an assessment of the 2-50 MW combined...

77

Integrated: Geospatial Toolkit for Honduras from NREL | OpenEI  

Open Energy Info (EERE)

Honduras from NREL Honduras from NREL Dataset Summary Description (Abstract): Stand-alone and easy to use geographic toolkit that allows non-GIS users to relate the renewable energy resource (solar and wind) data to other geographic data, such as land use, protected areas, elevation, etc. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the geospatial toolkit executable, Getting Started Document, and metadata.

78

Integrated: Geospatial Toolkit for Guatemala from NREL | OpenEI  

Open Energy Info (EERE)

Guatemala from NREL Guatemala from NREL Dataset Summary Description (Abstract): Stand-alone and easy to use geographic toolkit that allows non-GIS users to relate the renewable energy resource (solar and wind) data to other geographic data, such as land use, protected areas, elevation, etc. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the geospatial toolkit executable, Getting Started Document, and metadata.

79

Integrated: Geospatial Toolkit for Ghana from NREL | OpenEI  

Open Energy Info (EERE)

Ghana from NREL Ghana from NREL Dataset Summary Description (Abstract): Stand-alone and easy to use geographic toolkit that allows non-GIS users to relate the renewable energy resource (solar and wind) data to other geographic data, such as land use, protected areas, elevation, etc. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the geospatial toolkit executable, Getting Started Document, and metadata.

80

Integrated: Geospatial Toolkit for Nicaragua from NREL | OpenEI  

Open Energy Info (EERE)

Nicaragua from NREL Nicaragua from NREL Dataset Summary Description (Abstract): Stand-alone and easy to use geographic toolkit that allows non-GIS users to relate the renewable energy resource (solar and wind) data to other geographic data, such as land use, protected areas, elevation, etc. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the geospatial toolkit executable, Getting Started Document, and metadata.

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Integrated: Geospatial Toolkit for Bangladesh from NREL | OpenEI  

Open Energy Info (EERE)

Bangladesh from NREL Bangladesh from NREL Dataset Summary Description (Abstract): Stand-alone and easy to use geographic toolkit that allows non-GIS users to relate the renewable energy resource (solar and wind) data to other geographic data, such as land use, protected areas, elevation, etc. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the geospatial toolkit executable, Getting Started Document, and metadata.

82

Integrated: Geospatial Toolkit for Brazil from NREL | OpenEI  

Open Energy Info (EERE)

Brazil from NREL Brazil from NREL Dataset Summary Description (Abstract): Stand-alone and easy to use geographic toolkit that allows non-GIS users to relate the renewable energy resource (solar and wind) data to other geographic data, such as land use, protected areas, elevation, etc. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the geospatial toolkit executable, Getting Started Document, and metadata.

83

Integrated: Geospatial Toolkit GIS data for Nepal from NREL | OpenEI  

Open Energy Info (EERE)

Nepal from NREL Nepal from NREL Dataset Summary Description (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the available geospatial toolkit data and metadata. Each country's data package depends on the data provided by the SWERA partners.To access the Geospatial toolkit, http://www.nrel.gov/international/geospatial_toolkits.html

84

Tiburon: a weighted tree automata toolkit  

Science Journals Connector (OSTI)

The availability of weighted finite-state string automata toolkits made possible great advances in natural language processing. However, recent advances in syntax-based NLP model design are unsuitable for these toolkits. To combat this problem, we introduce ...

Jonathan May; Kevin Knight

2006-08-01T23:59:59.000Z

85

2013 SCRM Awareness Toolkit | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

More Documents & Publications Supply Chain Risk Management (SCRM) Awareness Toolkit Cybersecurity Awareness Electronic Messaging Cybersecurity Awareness MarketingPromotional...

86

Power Systems Development Facility. Environmental Assessment  

SciTech Connect

The objective of the PSDF would be to provide a modular facility which would support the development of advanced, pilot-scale, coal-based power systems and hot gas clean-up components. These pilot-scale components would be designed to be large enough so that the results can be related and projected to commercial systems. The facility would use a modular approach to enhance the flexibility and capability for testing; consequently, overall capital and operating costs when compared with stand-alone facilities would be reduced by sharing resources common to different modules. The facility would identify and resolve technical barrier, as well as-provide a structure for long-term testing and performance assessment. It is also intended that the facility would evaluate the operational and performance characteristics of the advanced power systems with both bituminous and subbituminous coals. Five technology-based experimental modules are proposed for the PSDF: (1) an advanced gasifier module, (2) a fuel cell test module, (3) a PFBC module, (4) a combustion gas turbine module, and (5) a module comprised of five hot gas cleanup particulate control devices. The final module, the PCD, would capture coal-derived ash and particles from both the PFBC and advanced gasifier gas streams to provide for overall particulate emission control, as well as to protect the combustion turbine and the fuel cell.

Not Available

1993-06-01T23:59:59.000Z

87

Market Analysis Toolkit | Open Energy Information  

Open Energy Info (EERE)

Market Analysis Toolkit Market Analysis Toolkit Jump to: navigation, search Search Resources Resource Type Training Materials Climate Technology Initiative Training Courses GHG Management Institute curriculum Supporting Small Forest Enterprises: A Facilitator's Toolkit Add Guides Accelerating Climate Technologies: Innovative Market Strategies to Overcome Barriers to Scale-up Supporting Small Forest Enterprises: A Facilitator's Toolkit The Climate Investment Funds-Business Guide UNEP-Bioenergy Decision Support Tool Add Lessons Learned and Best Practices Brazil LULUCF Modeling Supporting Small Forest Enterprises: A Facilitator's Toolkit Sustainable Land Management Through Market-Oriented Commodity Development: Case studies from Ethiopia Add Datasets Africa-Economic Development Report 2010

88

Greenhouse Gas Inventory Development Toolkit | Open Energy Information  

Open Energy Info (EERE)

Greenhouse Gas Inventory Development Toolkit Greenhouse Gas Inventory Development Toolkit Jump to: navigation, search Stage 2 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

89

Renewable Energy Technical Potential Toolkit | Open Energy Information  

Open Energy Info (EERE)

Renewable Energy Technical Potential Toolkit Renewable Energy Technical Potential Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

90

Project Screening and Design Toolkit | Open Energy Information  

Open Energy Info (EERE)

Project Screening and Design Toolkit Project Screening and Design Toolkit Jump to: navigation, search Stage 2 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

91

Land-use Scenario Analysis Toolkit | Open Energy Information  

Open Energy Info (EERE)

Land-use Scenario Analysis Toolkit Land-use Scenario Analysis Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

92

Energy System and Scenario Analysis Toolkit | Open Energy Information  

Open Energy Info (EERE)

Energy System and Scenario Analysis Toolkit Energy System and Scenario Analysis Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

93

Policy and Program Design Toolkit | Open Energy Information  

Open Energy Info (EERE)

Policy and Program Design Toolkit Policy and Program Design Toolkit (Redirected from Gateway:International/Policy and Program Design) Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other

94

Technology Cost and Performance Toolkit | Open Energy Information  

Open Energy Info (EERE)

Technology Cost and Performance Toolkit Technology Cost and Performance Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

95

Project Screening and Design Toolkit | Open Energy Information  

Open Energy Info (EERE)

Screening and Design Toolkit Screening and Design Toolkit (Redirected from Gateway:International/Project Screening and Design) Jump to: navigation, search Stage 2 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other

96

Sustainable Forest Finance Toolkit | Open Energy Information  

Open Energy Info (EERE)

Sustainable Forest Finance Toolkit Sustainable Forest Finance Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Sustainable Forest Finance Toolkit Agency/Company /Organization: World Business Council for Sustainable Development Sector: Land Focus Area: Forestry Topics: Finance Resource Type: Guide/manual Website: www.pwc.co.uk/pdf/forest_finance_toolkit.pdf Sustainable Forest Finance Toolkit Screenshot References: Sustainable Forest Finance Toolkit[1] Overview "This Toolkit has been developed jointly by PricewaterhouseCoopers (PwC) and the World Business Council for Sustainable Development (WBCSD). It is a globally applicable resource designed to help financial institutions support the management of forest resources through sustainable and legal timber production and processing, and markets for carbon and other

97

ITP Distributed Energy: Combined Heat and Power Market Assessment...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Governor COMBINED HEAT AND POWER MARKET ASSESSMENT Prepared For: California Energy Commission Public Interest Energy Research Program Prepared By: ICF International,...

98

Windows Forensic Analysis DVD Toolkit  

Science Journals Connector (OSTI)

The only book available on the market that addresses and discusses in-depth forensic analysis of Windows systems. Windows Forensic Analysis DVD Toolkit takes the reader to a whole new, undiscovered level of forensic analysis for Windows systems, providing ... Keywords: Computer Science, Security

Harlan Carvey

2007-04-01T23:59:59.000Z

99

Financing Initiatives Toolkit | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Financing Initiatives Toolkit (Redirected from Gateway:International/Financing Options) Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and

100

Financing Initiatives Toolkit | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Financing Initiatives Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

LEDSGP/DIA-Toolkit/How To | Open Energy Information  

Open Energy Info (EERE)

How To How To < LEDSGP‎ | DIA-Toolkit Jump to: navigation, search LEDSGP Logo.png Development Impacts Assessment Toolkit Home Tools Request Assistance How to Assess Development Impacts Countries may assess the impacts of a proposed or implemented development policy, program, or project on social, economic, and environmental development goals through a five-step process: Identify the policy or program of interest: What policy or program am I considering? Define impacts to consider: What impacts am I interested in identifying and evaluating? Identify the options for examining impacts: What tools and methodologies, both quantitative and qualitative, are available for impact analysis? Conduct the analysis. Share the results. 1. What policy or program am I considering?

102

Renewable Energy Technical Potential Toolkit | Open Energy Information  

Open Energy Info (EERE)

Energy Technical Potential Toolkit Energy Technical Potential Toolkit (Redirected from Gateway:International/Renewable Energy and Energy Efficiency Potential) Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives

103

Information Toolkit for post-2012 climate policies | Open Energy  

Open Energy Info (EERE)

Information Toolkit for post-2012 climate policies Information Toolkit for post-2012 climate policies Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Information Toolkit for post-2012 climate policies Agency/Company /Organization: Energy Research Centre of the Netherlands Partner: Brinkman Climate Change Sector: Energy Topics: Co-benefits assessment, Policies/deployment programs, Pathways analysis Resource Type: Dataset, Software/modeling tools Website: www.brinkmanclimatechange.com/Toolkit.htm Coordinates: 31.9524799°, -102.1732882° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":31.9524799,"lon":-102.1732882,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

104

Economic Impact Assessment: Laser and Fiberoptic Power and  

E-Print Network (OSTI)

00-3 Planning Report Economic Impact Assessment: NIST-EEEL Laser and Fiberoptic Power Office Strategic Planning and Economic Analysis Group August 2000 U.S Department of Commerce Technology Administration #12;FINAL REPORT ECONOMIC IMPACT ASSESSMENT: NIST-EEEL LASER AND FIBEROPTIC POWER AND ENERGY

105

NREL: Energy Analysis - Nuclear Power Results - Life Cycle Assessment  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Power Results - Life Cycle Assessment Harmonization Nuclear Power Results - Life Cycle Assessment Harmonization Over the last 30 years, analysts have conducted life cycle assessments on the environmental impacts associated with a variety of nuclear power technologies and systems. These life cycle assessments have had wide-ranging results. To better understand greenhouse gas (GHG) emissions from nuclear power systems, NREL completed a comprehensive review and analysis of life cycle assessments focused on light water reactors (LWRs)-including both boiling water reactors (BWRs) and pressurized water reactors (PWRs)-published between 1980 and 2010. NREL developed and applied a systematic approach to review life cycle assessment literature, identify primary sources of variability and, where possible, reduce variability in GHG emissions

106

Galvin Electricity Initiative Policy Toolkit | Open Energy Information  

Open Energy Info (EERE)

Galvin Electricity Initiative Policy Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Galvin Electricity Initiative Policy Toolkit AgencyCompany Organization:...

107

Cyber Security Audit and Attack Detection Toolkit: Bandolier...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cyber Security Audit and Attack Detection Toolkit: Bandolier and Portaledge, March 2010 Cyber Security Audit and Attack Detection Toolkit: Bandolier and Portaledge, March 2010 This...

108

Risk Analysis and Probabilistic Survivability Assessment (RAPSA): An Assessment Approach for Power Substation Hardening1  

E-Print Network (OSTI)

or infrastructure system, and cause widespread fear from a major or prolonged service disruption [8]. In assessingRisk Analysis and Probabilistic Survivability Assessment (RAPSA): An Assessment Approach for Power System Analysis (SSA) with Probability Risk Assessment (PRA). The method adds quantitative information

Krings, Axel W.

109

The Wind Integration National Dataset (WIND) toolkit (Presentation)  

SciTech Connect

Regional wind integration studies require detailed wind power output data at many locations to perform simulations of how the power system will operate under high penetration scenarios. The wind datasets that serve as inputs into the study must realistically reflect the ramping characteristics, spatial and temporal correlations, and capacity factors of the simulated wind plants, as well as being time synchronized with available load profiles.As described in this presentation, the WIND Toolkit fulfills these requirements by providing a state-of-the-art national (US) wind resource, power production and forecast dataset.

Caroline Draxl: NREL

2014-01-01T23:59:59.000Z

110

Waste Toolkit A-Z Plastic Grundon  

E-Print Network (OSTI)

Waste Toolkit A-Z Plastic ­ Grundon Also see `Swap Shop' and `Office Recycling ­ Grundon' in the Waste Toolkit A-Z How can I recycle plastic? There are lots of different types of plastic. Typically, waste contractors can only recycle PETE plastic and HDPE plastic. The University's preferred waste

Melham, Tom

111

Toolkit support for interactive projected displays  

Science Journals Connector (OSTI)

This paper presents a software toolkit designed to enable the rapid development of multimedia-rich, multi-touch enabled, and interactive projection-based displays. For instance: door displays, floor displays, wall displays, and interactive tables. Despite ... Keywords: deployments, experimentation, interaction, interactive surface, multi-touch, projection mapping, toolkit, ubiquitous displays

John Hardy; Jason Alexander

2012-12-01T23:59:59.000Z

112

USAID Toolkit for Increasing Energy Access | Open Energy Information  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » USAID Toolkit for Increasing Energy Access Jump to: navigation, search Tool Summary LAUNCH TOOL Name: USAID Toolkit for Increasing Energy Access Agency/Company /Organization: United States Agency for International Development (USAID) Partner: United Nations Framework Convention on Climate Change (UNFCCC), UNEP, United Nations Foundation Sector: Energy Focus Area: Renewable Energy, Energy Efficiency, People and Policy Phase: Evaluate Options, Develop Goals, Prepare a Plan, Create Early Successes, Evaluate Effectiveness and Revise as Needed Topics: Co-benefits assessment, - Energy Access

113

Turkey Geospatial Toolkit | OpenEI  

Open Energy Info (EERE)

Turkey Geospatial Toolkit Turkey Geospatial Toolkit Dataset Summary Description Developed by NREL and the U.S. Trade and Development Agency, this geographic toolkit that allows users to relate the renewable energy resource (solar and wind) data to other geographic data, such as land use, protected areas, elevation, etc. The GsT was completely redesigned and re-released in November 2010 to provide a more modern, easier-to-use interface with considerably faster analytical querying capabilities. The revised version of the Geospatial Toolkit for Turkey is available using the following link: http://www.nrel.gov/international/downloads/gst_turkey.exe NOTE: Please use the provided link to access the most up to date software package and data. The Turkey GsT data were last updated in January 2011. The attached zip file below is an archive and contains the previous version of the geospatial toolkit executable that has been replaced.

114

LEDSGP/Transportation Toolkit | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit < LEDSGP(Redirected from Transportation Toolkit) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Developing Strategies for Clean, Efficient Transportation The Transportation LEDS Toolkit supports development planners, technical experts, and decision makers at national and local levels to plan and implement low emission transportation systems that support economic growth. This toolkit website helps users navigate a variety of resources in order to identify the most effective tools necessary to build and implement low

115

Biennial Assessment of the Fifth Power Plan Transmission Issues  

E-Print Network (OSTI)

by the partners in the Colstrip 500 kV transmission lines (Northwestern Energy, Puget Sound Energy, Portland unscheduled electricity flows over transmission lines leading to increased risks to electric systemBiennial Assessment of the Fifth Power Plan Transmission Issues INTRODUCTION The Fifth Power Plan

116

Green Power Marketing in Retail Competition: An Early Assessment  

NLE Websites -- All DOE Office Websites (Extended Search)

5939 5939 LBNL-42286 February 1999 Green Power Marketing in Retail Competition: An Early Assessment Ryan Wiser, Ernest Orlando Lawrence Berkeley National Laboratory Jeff Fang, Kevin Porter, and Ashley Houston, National Renewable Energy Laboratory National Renewable Energy Laboratory A national laboratory of the U.S. Department of Energy The Topical Issues Brief series is sponsored by DOE's Office of Energy Efficiency and Renewable Energy Office of Power Technologies Green Power Marketing in Retail Competition i Contents Abstract ........................................................................................................................................ ii Acknowledgments ..........................................................................................................................

117

NREL: Energy Analysis - Wind Power Results - Life Cycle Assessment  

NLE Websites -- All DOE Office Websites (Extended Search)

Wind LCA Harmonization (Fact Sheet) Wind LCA Harmonization (Fact Sheet) Cover of the LWind LCA Harmonization Fact Sheet Download the Fact Sheet Wind Power Results - Life Cycle Assessment Harmonization To better understand the state of knowledge of greenhouse gas (GHG) emissions from utility-scale wind power systems, NREL developed and applied a systematic approach to review life cycle assessment literature, identify sources of variability and, where possible, reduce variability in GHG emissions estimates through a meta-analytical process called "harmonization." Over the last 30 years, several hundred life cycle assessments have been conducted for wind power technologies with wide-ranging results. Harmonization for onshore and offshore wind power systems was performed by adjusting published greenhouse gas estimates to achieve:

118

title Life Cycle Assessment of Electric Power Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Life Cycle Assessment of Electric Power Systems Life Cycle Assessment of Electric Power Systems journal Annual Review of Environment and Resources volume year month abstract p The application of life cycle assessment LCA to electric power EP technologies is a vibrant research pursuit that is likely to continue as the world seeks ways to meet growing electricity demand with reduced environmental and human health impacts While LCA is an evolving methodology with a number of barriers and challenges to its effective use LCA studies to date have clearly improved our understanding of the life cycle energy GHG emissions air pollutant emissions and water use implications of EP technologies With continued progress LCA offers promise for assessing and comparing EP technologies in an analytically thorough and environmentally holistic manner for more robust deployment

119

Guide to Using the WIND Toolkit Validation Code  

SciTech Connect

In response to the U.S. Department of Energy's goal of using 20% wind energy by 2030, the Wind Integration National Dataset (WIND) Toolkit was created to provide information on wind speed, wind direction, temperature, surface air pressure, and air density on more than 126,000 locations across the United States from 2007 to 2013. The numerical weather prediction model output, gridded at 2-km and at a 5-minute resolution, was further converted to detail the wind power production time series of existing and potential wind facility sites. For users of the dataset it is important that the information presented in the WIND Toolkit is accurate and that errors are known, as then corrective steps can be taken. Therefore, we provide validation code written in R that will be made public to provide users with tools to validate data of their own locations. Validation is based on statistical analyses of wind speed, using error metrics such as bias, root-mean-square error, centered root-mean-square error, mean absolute error, and percent error. Plots of diurnal cycles, annual cycles, wind roses, histograms of wind speed, and quantile-quantile plots are created to visualize how well observational data compares to model data. Ideally, validation will confirm beneficial locations to utilize wind energy and encourage regional wind integration studies using the WIND Toolkit.

Lieberman-Cribbin, W.; Draxl, C.; Clifton, A.

2014-12-01T23:59:59.000Z

120

Life-Cycle Assessment of Electric Power Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Life-Cycle Assessment of Electric Power Systems Life-Cycle Assessment of Electric Power Systems Title Life-Cycle Assessment of Electric Power Systems Publication Type Journal Article Year of Publication 2013 Authors Masanet, Eric R., Yuan Chang, Anand R. Gopal, Peter H. Larsen, William R. Morrow, Roger Sathre, Arman Shehabi, and Pei Zhai Journal Annual Review of Environment and Resources Volume 38 Date Published 2013 Keywords electricity, energy policy, environmental analysis, life-cycle impact, life-cycle inventory Abstract The application of life-cycle assessment (LCA) to electric power (EP) technologies is a vibrant research pursuit that is likely to continue as the world seeks ways to meet growing electricity demand with reduced environmental and human health impacts. While LCA is an evolving methodology with a number of barriers and challenges to its effective use, LCA studies to date have clearly improved our understanding of the life-cycle energy, GHG emissions, air pollutant emissions, and water use implications of EP technologies. With continued progress, LCA offers promise for assessing and comparing EP technologies in an analytically-thorough and environmentally-holistic manner for more robust deployment decisions. This article summarizes: (1) major challenges in applying LCA to EP technologies thus far, (2) LCA results to date on the various impacts of EP technologies, and (3) opportunities for improving LCAs as applied to EP technologies moving forward.

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Grid Simulator for Power Quality Assessment of Micro-Grids  

E-Print Network (OSTI)

1 Grid Simulator for Power Quality Assessment of Micro-Grids Joaqu´in Eloy-Garc´iaa , Juan C-to-back to a 380 V three-phase grid and feeding a micro-grid composed of two inverter interfaced distributed of the simulator. Finally, a case study is presented by testing a micro-grid. Index Terms Grid Simulator, Power

Vasquez, Juan Carlos

122

TOOLKIT  

E-Print Network (OSTI)

Job Order Ledger (Detai People/Person Property Man PurchaseJob Order Ledger (Detail or General) People/Personnel Property Management PurchaseJob Order Please select desiredoption Ledger(Detail or Ge People/Personnel Employees & Guests by Division Property Managem Phonebook Search Purchase

Schroeder, E.

2010-01-01T23:59:59.000Z

123

LEDSGP/Transportation Toolkit | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit < LEDSGP Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Developing Strategies for Clean, Efficient Transportation The Transportation Toolkit supports development planners, technical experts, and decision makers at national and local levels to plan and implement low-emission transportation systems that support economic growth. This toolkit helps users navigate a variety of resources to identify the most effective tools to build and implement low emission development strategies (LEDS) for the transport sector. Learn more in the report on

124

Renewable Energy Toolkit (REToolkit) | Open Energy Information  

Open Energy Info (EERE)

Renewable Energy Toolkit (REToolkit) Renewable Energy Toolkit (REToolkit) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy Toolkit (REToolkit) Focus Area: Renewable Energy Topics: Market Analysis Website: web.worldbank.org/WBSITE/EXTERNAL/TOPICS/EXTENERGY2/EXTRENENERGYTK/0,, Equivalent URI: cleanenergysolutions.org/content/renewable-energy-toolkit-retoolkit Language: English Policies: "Deployment Programs,Regulations,Financial Incentives" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Technical Assistance Regulations: "Net Metering & Interconnection,Utility/Electricity Service Costs" is not in the list of possible values (Agriculture Efficiency Requirements, Appliance & Equipment Standards and Required Labeling, Audit Requirements, Building Certification, Building Codes, Cost Recovery/Allocation, Emissions Mitigation Scheme, Emissions Standards, Enabling Legislation, Energy Standards, Feebates, Feed-in Tariffs, Fuel Efficiency Standards, Incandescent Phase-Out, Mandates/Targets, Net Metering & Interconnection, Resource Integration Planning, Safety Standards, Upgrade Requirements, Utility/Electricity Service Costs) for this property.

125

Low Emission Development Strategies toolkit search  

Open Energy Info (EERE)

Strategy (LEDS) Toolkit Strategy (LEDS) Toolkit Are we missing something? Add a Tool software models, databases, training materials, publications Add a Program climate-related activities or strategies How to use the LEDS toolkit The LEDS toolkit presented on this website provides information on available datasets, studies, tools, and other technical resources to support the LEDS process. The customized search boxes below allow a user to search tools and programs in relation to relevant questions, sector, geography, LEDS methodology stage, analytical needs, and other search terms. The country cloud to the right also allows a user to search easily for resources and programs in a specific country. The inventory of tools and programs is user-generated and we encourage users to upload and edit additional content using the "Are we missing something?" box to the right. ....[read more][show less]

126

A Toolkit for Building Sustainability at Dartmouth  

E-Print Network (OSTI)

1 A Toolkit for Building Sustainability at Dartmouth Environmental Studies 50, Spring 2011 College Sustainability Strategic Planning Process. Dartmouth College has a strong legacy of sustainability, are racing forward with new sustainability initiatives, sustainable building designs, and new, innovative

127

Building Energy Software Tools Directory: HVAC 1 Toolkit  

NLE Websites -- All DOE Office Websites (Extended Search)

HVAC 1 Toolkit HVAC 1 Toolkit HVAC 1 Toolkit logo. The Toolkit for Primary HVAC System Energy Calculations is a collection of thirty-eight separate subroutines and corresponding documentation that describes algorithms for predicting the performance of HVAC components. The Toolkit documentation includes thorough descriptions of the component models and solution algorithms, detailed information on the structure of the individual FORTRAN 77 routines, as well as illustrative examples of system simulations with the Toolkit routines. The Toolkit serves two purposes: modules for large-scale simulation and stand-alone component performance prediction. The Toolkit components can also be used to calculate the energy performance of a component with a dedicated driver program to provide the necessary information flow to the Toolkit routines.

128

Computational Science Technical Note CSTN-119 Betweenness Centrality Metrics for Assessing Electrical Power Network  

E-Print Network (OSTI)

0 Computational Science Technical Note CSTN-119 Betweenness Centrality Metrics for Assessing. Hawick}, title = {Betweenness Centrality Metrics for Assessing Electrical Power Network Robustness Metrics for Assessing Electrical Power Network Robustness against Fragmentation and Node Failure K

Hawick, Ken

129

The mediation of environmental assessment's influence: What role for power?  

SciTech Connect

Considerable empirical research has been conducted on why policy tools such as environmental assessment (EA) often appear to have 'little effect' (after Weiss) on policy decisions. This article revisits this debate but looks at a mediating factor that has received limited attention to-date in the context of EA - political power. Using a tripartite analytical framework, a comparative analysis of the influence and significance of power in mediating environmental policy integration is undertaken. Power is analysed, albeit partially, through an exploration of institutions that underpin social order. Empirically, the research examines the case of a new approach to policy-level EA (essentially a form of Strategic Environmental Assessment) developed by the World Bank and its trial application to urban environmental governance and planning in Dhaka mega-city, Bangladesh. The research results demonstrate that power was intimately involved in mediating the influence of the policy EA approach, in both positive (enabling) and negative (constraining) ways. It is suggested that the policy EA approach was ultimately a manifestation of a corporate strategy to maintain the powerful position of the World Bank as a leading authority on international development which focuses on knowledge generation. Furthermore, as constitutive of an institution and reflecting the worldviews of its proponents, the development of a new approach to EA also represents a significant power play. This leads us to, firstly, emphasise the concepts of strategy and intentionality in theorising how and why EA tools are employed, succeed and fail; and secondly, reflect on the reasons why power has received such limited attention to-date in EA scholarship. - Highlights: Black-Right-Pointing-Pointer Conducts empirical research on the neglected issue of power. Black-Right-Pointing-Pointer Employs an interpretation of power in which it is viewed as a productive phenomenon. Black-Right-Pointing-Pointer Analyses the influence of power in the trial application of a new approach to policy environmental assessment. Black-Right-Pointing-Pointer Demonstrates the importance of power dynamics in understanding the successes and failures of environmental assessment.

Cashmore, Matthew, E-mail: cashmore@plan.aau.dk [Danish Centre for Environmental Assessment, Department of Development and Planning, Aalborg University Copenhagen, A.C. Meyers Vaenge 15, DK-2450 Copenhagen SV (Denmark); Axelsson, Anna [Naturskyddsforeningen, Box 4625, 116 91 Stockholm (Sweden)

2013-02-15T23:59:59.000Z

130

Integrated: Geospatial Toolkit GIS data for Ghana from NREL | OpenEI  

Open Energy Info (EERE)

Ghana from NREL Ghana from NREL Dataset Summary Description (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the available geospatial toolkit data and metadata. Each country's data package depends on the data provided by the SWERA partners. ---------------------------------------------------------

131

Integrated: Geospatial Toolkit GIS data for Guatemala from NREL | OpenEI  

Open Energy Info (EERE)

Guatemala from NREL Guatemala from NREL Dataset Summary Description (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the available geospatial toolkit data and metadata. Each country's data package depends on the data provided by the SWERA partners. ---------------------------------------------------------

132

Integrated: Geospatial Toolkit GIS data for China from NREL | OpenEI  

Open Energy Info (EERE)

China from NREL China from NREL Dataset Summary Description (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the available geospatial toolkit data and metadata. Each country's data package depends on the data provided by the SWERA partners. ---------------------------------------------------------

133

Integrated: Geospatial Toolkit GIS data for El Salvador from NREL | OpenEI  

Open Energy Info (EERE)

El Salvador from NREL El Salvador from NREL Dataset Summary Description (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the available geospatial toolkit data and metadata. Each country's data package depends on the data provided by the SWERA partners. ---------------------------------------------------------

134

Integrated: Geospatial Toolkit GIS data for Bangladesh from NREL | OpenEI  

Open Energy Info (EERE)

Bangladesh from NREL Bangladesh from NREL Dataset Summary Description (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the available geospatial toolkit data and metadata. Each country's data package depends on the data provided by the SWERA partners. ---------------------------------------------------------

135

Integrated: Geospatial Toolkit for El Salvador from NREL | OpenEI  

Open Energy Info (EERE)

El Salvador from NREL El Salvador from NREL Dataset Summary Description (Abstract): Stand-alone and easy to use geographic toolkit that allows non-GIS users to relate the renewable energy resource (solar and wind) data to other geographic data, such as land use, protected areas, elevation, etc. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the geospatial toolkit executable, Getting Started Document, and metadata.

136

Integrated: Geospatial Toolkit GIS data for Nicaragua from NREL | OpenEI  

Open Energy Info (EERE)

Nicaragua from NREL Nicaragua from NREL Dataset Summary Description (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the available geospatial toolkit data and metadata. Each country's data package depends on the data provided by the SWERA partners. ---------------------------------------------------------

137

Integrated: Geospatial Toolkit GIS data for Kenya from NREL | OpenEI  

Open Energy Info (EERE)

Kenya from NREL Kenya from NREL Dataset Summary Description (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the available geospatial toolkit data and metadata. Each country's data package depends on the data provided by the SWERA partners. ---------------------------------------------------------

138

Integrated: Geospatial Toolkit GIS data for Cuba from NREL | OpenEI  

Open Energy Info (EERE)

Cuba from NREL Cuba from NREL Dataset Summary Description (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the available geospatial toolkit data and metadata. Each country's data package depends on the data provided by the SWERA partners. ---------------------------------------------------------

139

Integrated: Geospatial Toolkit GIS data for Ethiopia from NREL | OpenEI  

Open Energy Info (EERE)

Ethiopia from NREL Ethiopia from NREL Dataset Summary Description (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software.(Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the available geospatial toolkit data and metadata. Each country's data package depends on the data provided by the SWERA partners. ---------------------------------------------------------

140

Integrated: Geospatial Toolkit GIS data for Brazil from NREL | OpenEI  

Open Energy Info (EERE)

Brazil from NREL Brazil from NREL Dataset Summary Description (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the available geospatial toolkit data and metadata. Each country's data package depends on the data provided by the SWERA partners. ---------------------------------------------------------

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Integrated: Geospatial Toolkit GIS data for Honduras from NREL | OpenEI  

Open Energy Info (EERE)

Honduras from NREL Honduras from NREL Dataset Summary Description (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software.(Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the available geospatial toolkit data and metadata. Each country's data package depends on the data provided by the SWERA partners. ---------------------------------------------------------

142

Integrated: Geospatial Toolkit for Sri Lanka from NREL | OpenEI  

Open Energy Info (EERE)

Sri Lanka from NREL Sri Lanka from NREL Dataset Summary Description (Abstract): Stand-alone and easy to use geographic toolkit that allows non-GIS users to relate the renewable energy resource (solar and wind) data to other geographic data, such as land use, protected areas, elevation, etc. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the geospatial toolkit executable, Getting Started Document, and metadata.

143

Integrated: Geospatial Toolkit GIS data for Sri Lanka from NREL | OpenEI  

Open Energy Info (EERE)

Sri Lanka from NREL Sri Lanka from NREL Dataset Summary Description (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy Resource Assessment (SWERA) Geospatial Toolkit (GsT) is a map-based software application that can be used for decision making and policy analysis in addition to planning for future energy projects. The SWERA application utilizes Geographical Information Systems (GIS) to develop common scenarios to evaluate potential locations for solar or wind energy plants. (Supplemental Information): The zip file contains the available geospatial toolkit data and metadata. Each country's data package depends on the data provided by the SWERA partners. ---------------------------------------------------------

144

Comprehensive assessment of flexibility of the wind power industry chain  

Science Journals Connector (OSTI)

Abstract A number of energy development plans have been released in China in recent decades. These plans were aimed at promoting the optimization of the Chinese energy industry structure and achieving emission reduction targets by encouraging the development of clean energies such as wind energy. The sustainable development of the clean energy industry chain faces a number of challenges, one of which is the lack of flexibility. This has led to some serious issues associated with clean power industries such as wind power and it is timely to investigate the flexibility of the wind power industry chain to ensure its sustainable development. A hybrid research methodology has been employed in this study to identify most critical factors that affect the flexibility level of the wind power industry chain. These factors are related to seven types of flexibility, i.e. structural flexibility, production flexibility, operational flexibility, technological flexibility, development flexibility, construction flexibility, and policy flexibility. A flexibility assessment index system classified according to upstream, midstream and downstream industry supply chain has been established for the wind power industry chain and a Matter-element extension model was adopted to determine the level of flexibility. The flexibility deviation of the main factors that affect the flexibility of wind power was calculated using sensitivity analysis. The case study suggested that it is feasible to utilize this novel method to evaluate the flexibility of the wind power industry chain. The outcomes of the flexibility analysis provide useful information to assist the decision making process of both government and industry.

Cun-Bin Li; Hong-Yi Chen; Jiang Zhu; Jian Zuo; George Zillante; Zhen-Yu Zhao

2015-01-01T23:59:59.000Z

145

Grid-Connected Renewable Energy Generation Toolkit-Hydroelectric | Open  

Open Energy Info (EERE)

Grid-Connected Renewable Energy Generation Toolkit-Hydroelectric Grid-Connected Renewable Energy Generation Toolkit-Hydroelectric Jump to: navigation, search Tool Summary Name: Grid-Connected Renewable Energy Generation Toolkit-Hydroelectric Agency/Company /Organization: United States Agency for International Development Sector: Energy Resource Type: Training materials Website: www.energytoolbox.org/gcre/mod_4/index.shtml Grid-Connected Renewable Energy Generation Toolkit-Hydroelectric Screenshot References: Grid-Connected Renewable Energy Generation Toolkit-Hydroelectric[1] Logo: Grid-Connected Renewable Energy Generation Toolkit-Hydroelectric GCREhydro.JPG References ↑ "Grid-Connected Renewable Energy Generation Toolkit-Hydroelectric" Retrieved from "http://en.openei.org/w/index.php?title=Grid-Connected_Renewable_Energy_Generation_Toolkit-Hydroelectric&oldid=375082

146

Intra-hour wind power variability assessment using the conditional range metric : quantification, forecasting and applications.  

E-Print Network (OSTI)

??The research presented herein concentrates on the quantification, assessment and forecasting of intra-hour wind power variability. Wind power is intrinsically variable and, due to the (more)

Boutsika, Thekla

2013-01-01T23:59:59.000Z

147

MCT: Model Coupling Toolkit | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

MCT: Model Coupling Toolkit MCT: Model Coupling Toolkit MCT: Model Coupling Toolkit MCT is a set of open-source software tools for creating coupled models. MCT is fully parallel and can be used to couple message-passing parallel models to create a parallel coupled model. MCT is available as a small library and a set of Fortran90 modules. MCT provides model interoperability through a simple API. Two models that declare and use MCT datatypes can be coupled with a minimum of effort. MCT provides the following core coupling services: A component model registry Domain decomposition descriptors Communications schedulers for parallel MxN intercomponent data transfer and MxM intracomponent data redistribution A flexible and indexible (i.e., random-access) field data storage datatype A time averaging and accumulation buffer datatype

148

Category:Transportation Toolkits | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Category Edit History Facebook icon Twitter icon » Category:Transportation Toolkits Jump to: navigation, search Add a new Transportation Toolkit Pages in category "Transportation Toolkits" The following 86 pages are in this category, out of 86 total. A A Report on Worldwide Hydrogen Bus Demonstrations, 2002-2007 A Review of HOV Lane Performance and Policy Options in the United States - Final Report A Roadmap to Funding Infrastructure Development Adapting Urban Transport to Climate Change- Module 5f - Sustainable transport: a sourcebook for policy-makers in developing cities Africa's Transport Infrastructure Mainstreaming Maintenance and Management

149

Assessment of Future ICE and Fuel-Cell Powered Vehicles and Their...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Assessment of Future ICE and Fuel-Cell Powered Vehicles and Their Potential Impacts Assessment of Future ICE and Fuel-Cell Powered Vehicles and Their Potential Impacts 2004 Diesel...

150

Assessing the Benefits of On-Site Combined Heat and Power During...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Assessing the Benefits of On-Site Combined Heat and Power During the August 14, 2003, Blackout, June 2004 Assessing the Benefits of On-Site Combined Heat and Power During the...

151

Land-use Policy and Program Design Toolkit | Open Energy Information  

Open Energy Info (EERE)

Land-use Policy and Program Design Toolkit Land-use Policy and Program Design Toolkit Jump to: navigation, search Stage 4 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

152

Cooling, Heating, and Power for Industry: A Market Assessment, August 2003  

Energy.gov (U.S. Department of Energy (DOE))

The focus of this study was to assess the market for cooling, heating, and power applications in the industrial sector.

153

Characterization of the Solar Power Resource in Europe and Assessing Benefits of Co-Location with Wind Power Installations  

E-Print Network (OSTI)

The extent, availability and reliability of solar power generation are assessed over Europe, andfollowing a previously developed methodologyspecial attention is given to the intermittency of solar power. Combined with ...

Bozonnat, C.

154

UNEP Toolkit for Clean Fleet Strategy Development | Open Energy Information  

Open Energy Info (EERE)

UNEP Toolkit for Clean Fleet Strategy Development UNEP Toolkit for Clean Fleet Strategy Development Jump to: navigation, search Tool Summary LAUNCH TOOL Name: UNEP Toolkit for Clean Fleet Strategy Development Agency/Company /Organization: United Nations Environment Programme Sector: Energy Focus Area: Energy Efficiency, Renewable Energy, Transportation Topics: Implementation, Policies/deployment programs Website: www.unep.org/tnt-unep/toolkit/ UNEP Toolkit for Clean Fleet Strategy Development Screenshot References: UNEP Toolkit[1] Background "This Toolkit will help you develop a strategy for reducing the envrionmental impacts of your fleet. To develop your own fleet strategy you need to follow the steps below. Start with opening the Step by Step action plan on this homepage. The Tools will provide information and will allow

155

LEDSGP/Transportation Toolkit/Contact Us | Open Energy Information  

Open Energy Info (EERE)

LEDSGP/Transportation Toolkit/Contact Us LEDSGP/Transportation Toolkit/Contact Us < LEDSGP‎ | Transportation Toolkit(Redirected from Transportation Toolkit/Contact Us) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Contacts for the LEDS GP Transport Working Group The Transportation Toolkit is provided by the Transport Working Group as part of the Low Emission Development Strategies (LEDS) Global Partnership. If you have questions or comments about this toolkit, . Remote Expert Assistance on LEDS The LEDS Global Partnership provides timely, high-quality, no-fee technical assistance on transportation issues as part of the Remote Expert Assistance on LEDS (REAL) service. Experts from institutions around the world are available to provide objective advice, conduct reviews and brief

156

Afghanistan Geospatial Toolkit - Full Data | OpenEI  

Open Energy Info (EERE)

Full Data Full Data Dataset Summary Description (Abstract): This Geospatial Toolkit contains the full (with high resolution data) version of the GsT interfaced to HOMER for Afghanistan. (Purpose): The products contained on this web site were developed by the U.S. National Renewable Energy Laboratory (NREL) for the U.S. Agency for International Development's (USAID) South Asia Regional Initiative for Energy Cooperation (SARI/E). (Supplemental Information): The GsT allows the user to examine the resource data in a geospatial context along with other key information relevant to renewable energy development, such as transportation networks, transmission corridors, existing power facilities, load centers, terrain conditions, and land use. Working within the GsT, the user can also incorporate location-specific data directly into NREL's Micropower Optimization Model, HOMER, to design least-cost hybrid renewable power systems to meet electric-load requirements at the village level.

157

Pakistan Geospatial Toolkit - Data Lite | OpenEI  

Open Energy Info (EERE)

Data Lite Data Lite Dataset Summary Description (Abstract): This Geospatial Toolkit contains the lite (with lower resolution data) version of the GsT interfaced to HOMER for Pakistan. (Purpose): The products contained on this web site were developed by the U.S. National Renewable Energy Laboratory (NREL) for the U.S. Agency for International Development's (USAID) South Asia Regional Initiative for Energy Cooperation (SARI/E). (Supplemental Information): The GsT allows the user to examine the resource data in a geospatial context along with other key information relevant to renewable energy development, such as transportation networks, transmission corridors, existing power facilities, load centers, terrain conditions, and land use. Working within the GsT, the user can also incorporate location-specific data directly into NREL's Micropower Optimization Model, HOMER, to design least-cost hybrid renewable power systems to meet electric-load requirements at the village level.

158

Pakistan Geospatial Toolkit - Full Data | OpenEI  

Open Energy Info (EERE)

Full Data Full Data Dataset Summary Description (Abstract): This Geospatial Toolkit contains the full (with high resolution data) version of the GsT interfaced to HOMER for Pakistan. (Purpose): The products contained on this web site were developed by the U.S. National Renewable Energy Laboratory (NREL) for the U.S. Agency for International Development's (USAID) South Asia Regional Initiative for Energy Cooperation (SARI/E). (Supplemental Information): The GsT allows the user to examine the resource data in a geospatial context along with other key information relevant to renewable energy development, such as transportation networks, transmission corridors, existing power facilities, load centers, terrain conditions, and land use. Working within the GsT, the user can also incorporate location-specific data directly into NREL's Micropower Optimization Model, HOMER, to design least-cost hybrid renewable power systems to meet electric-load requirements at the village level.

159

Afghanistan Geospatial Toolkit - Data Lite | OpenEI  

Open Energy Info (EERE)

Data Lite Data Lite Dataset Summary Description (Abstract): This Geospatial Toolkit contains the lite (with lower resolution data) version of the GsT interfaced to HOMER for Afghanistan. (Purpose): The products contained on this web site were developed by the U.S. National Renewable Energy Laboratory (NREL) for the U.S. Agency for International Development's (USAID) South Asia Regional Initiative for Energy Cooperation (SARI/E). (Supplemental Information): The GsT allows the user to examine the resource data in a geospatial context along with other key information relevant to renewable energy development, such as transportation networks, transmission corridors, existing power facilities, load centers, terrain conditions, and land use. Working within the GsT, the user can also incorporate location-specific data directly into NREL's Micropower Optimization Model, HOMER, to design least-cost hybrid renewable power systems to meet electric-load requirements at the village level.

160

Power plant system assessment. Final report. SP-100 Program  

SciTech Connect

The purpose of this assessment was to provide system-level insights into 100-kWe-class space reactor electric systems. Using these insights, Rockwell was to select and perform conceptual design studies on a ''most attractive'' system that met the preliminary design goals and requirements of the SP-100 Program. About 4 of the 6 months were used in the selection process. The remaining 2 months were used for the system conceptual design studies. Rockwell completed these studies at the end of FY 1983. This report summarizes the results of the power plant system assessment and describes our choice for the most attractive system - the Rockwell SR-100G System (Space Reactor, 100 kWe, Growth) - a lithium-cooled UN-fueled fast reactor/Brayton turboelectric converter system.

Anderson, R.V.; Atkins, D.F.; Bost, D.S.; Berman, B.; Clinger, D.A.; Determan, W.R.; Drucker, G.S.; Glasgow, L.E.; Hartung, J.A.; Harty, R.B.

1983-10-31T23:59:59.000Z

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Waste Toolkit A-Z Plastic bags  

E-Print Network (OSTI)

Waste Toolkit A-Z Plastic bags Can I recycle plastic bags? No. At the moment you can't recycle plastic bags in the University recycling. Instead, choose alternatives to plastic bags when shopping have to use a cotton bag 131 times to ensure it has lower global warming potential than a plastic

Melham, Tom

162

Supply Chain Risk Management (SCRM) Awareness Toolkit  

Energy.gov (U.S. Department of Energy (DOE))

DOE-developed toolkit contains SCRM awareness material that informs the general DOE user of basic SCRM terms and concepts. Supply chain is how organizations, people, technology, activities, information and resources are involved in developing, producing, or delivering a product or service.

163

A toolkit for building earth system models  

SciTech Connect

An earth system model is a computer code designed to simulate the interrelated processes that determine the earth's weather and climate, such as atmospheric circulation, atmospheric physics, atmospheric chemistry, oceanic circulation, and biosphere. I propose a toolkit that would support a modular, or object-oriented, approach to the implementation of such models.

Foster, I.

1993-03-01T23:59:59.000Z

164

A toolkit for building earth system models  

SciTech Connect

An earth system model is a computer code designed to simulate the interrelated processes that determine the earth`s weather and climate, such as atmospheric circulation, atmospheric physics, atmospheric chemistry, oceanic circulation, and biosphere. I propose a toolkit that would support a modular, or object-oriented, approach to the implementation of such models.

Foster, I.

1993-03-01T23:59:59.000Z

165

Policy and Program Design Toolkit | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Policy and Program Design Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country

166

Technology Cost and Performance Toolkit | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Technology Cost and Performance Toolkit (Redirected from Gateway:International/Technology Performance and Costs) Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and

167

Developing new methodology for nuclear power plants vulnerability assessment  

Science Journals Connector (OSTI)

The fundamental aim of an efficient regulatory emergency preparedness and response system is to provide sustained emergency readiness and to prevent emergency situations and accidents. But when an event occurs, the regulatory mission is to mitigate consequences and to protect people and the environment against nuclear and radiological damage. The regulatory emergency response system, which would be activated in the case of a nuclear and/or radiological emergency and release of radioactivity to the environment, is an important element of a comprehensive national regulatory system of nuclear and radiation safety. In the past, national emergency systems explicitly did not include vulnerability assessments of the critical nuclear infrastructure as an important part of a comprehensive preparedness framework. But after the huge terrorist attack on 11/09/2001, decision-makers became aware that critical nuclear infrastructure could also be an attractive target to terrorism, with the purpose of using the physical and radioactive properties of the nuclear material to cause mass casualties, property damage, and detrimental economic and/or environmental impacts. The necessity to evaluate critical nuclear infrastructure vulnerability to threats like human errors, terrorist attacks and natural disasters, as well as preparation of emergency response plans with estimation of optimized costs, are of vital importance for assurance of safe nuclear facilities operation and national security. In this paper presented new methodology and solution methods for vulnerability assessment can help the overall national energy sector to identify and understand the terrorist threats to and vulnerabilities of its critical infrastructure. Moreover, adopted methodology could help national regulators and agencies to develop and implement a vulnerability awareness and education programs for their critical assets to enhance the security and a safe operation of the entire energy infrastructure. New methods can also assist nuclear power plants to develop, validate, and disseminate assessment and surveys of new efficient countermeasures. Consequently, concise description of developed new quantitative method and adapted new methodology for nuclear regulatory vulnerability assessment of nuclear power plants are presented.

Venceslav Kostadinov

2011-01-01T23:59:59.000Z

168

ACE Learning Series - Adoption Toolkit | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

ACE Learning Series - Adoption Toolkit ACE Learning Series - Adoption Toolkit This toolkit was developed by the U.S. Department of Energy's (DOE) Building Energy Codes Program (BECP) for use by states, municipalities, energy code advocates, policymakers, stakeholders, and all other groups with a vested interest in energy code adoption. This toolkit provides information and resources to help guide adopting authorities through the adoption process and setting minimum requirements for new construction. This toolkit provides some insight into how the adoption process may influence the residential and commercial build communities. Publication Date: Saturday, September 1, 2012 AdoptionToolkit.pdf Document Details Document Number: PNNL-SA-89963 Prepared by: prepared by Pacific Northwest National Laboratory for the U.S. Department

169

WRI-The Governance of Forests Toolkit | Open Energy Information  

Open Energy Info (EERE)

WRI-The Governance of Forests Toolkit WRI-The Governance of Forests Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: WRI-The Governance of Forests Toolkit Agency/Company /Organization: World Resources Institute Sector: Land, Climate Focus Area: Forestry Resource Type: Publications Website: pdf.wri.org/working_papers/gfi_tenure_indicators_sep09.pdf Cost: Free WRI-The Governance of Forests Toolkit Screenshot References: WRI-The Governance of Forests Toolkit[1] "The Governance of Forests Initiative (GFI) seeks to bring widely accepted principles of good governance to bear on the challenges of sustaining forests in developing countries. GFI is a collaboration of the World Resources Institute, Imazon (Brazil) and the Instituto Centro de Vida (Brazil). This document presents the GFI Toolkit (Version 1) and outlines a process

170

Life-Cycle Assessment of Electric Power Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Life-Cycle Life-Cycle Assessment of Electric Power Systems Eric Masanet, 1 Yuan Chang, 1 Anand R. Gopal, 2 Peter Larsen, 2,3 William R. Morrow III, 2 Roger Sathre, 2 Arman Shehabi, 2 and Pei Zhai 2 1 McCormick School of Engineering and Applied Science, Northwestern University, Evanston, Illinois 60208; email: eric.masanet@northwestern.edu, yuan.chang@northwestern.edu 2 Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720; email: argopal@lbl.gov, wrmorrow@lbl.gov, rsathre@lbl.gov, ashehabi@lbl.gov, pzhai@lbl.gov 3 Management Science and Engineering Department, Stanford University, Stanford, California 94305; email: phlarsen@lbl.gov Annu. Rev. Environ. Resour. 2013. 38:107-36 First published online as a Review in Advance on August 7, 2013 The Annual Review of Environment and Resources is online at http://environ.annualreviews.org

171

Reliability assessment of autonomous power systems incorporating HVDC interconnection links  

SciTech Connect

The objective of this paper is to present an improved computational method for the overall reliability assessment of autonomous power systems that may or may not contain HVdc interconnection links. This is a hybrid method based on a Monte-Carlo simulation sequential approach which incorporates an analytical approach for the reliability modeling of the HVdc transmission links. The developed models and techniques have been implemented into a computer program that can be used to simulate the operational practices and characteristics of the overall system under study efficiently and realistically. A set of reliability indices are calculated for each load-point of interest and the entire system while a set of additional indices is calculated for quantifying the reliability performance of the interconnection links under the specified operating requirements. The analysis of a practical system is also included for a number of studies representing its various operating and design characteristics.

Dialynas, E.N.; Koskolos, N.C. [National Technical Univ., Athens (Greece). Dept. of Electrical and Computer Engineering] [National Technical Univ., Athens (Greece). Dept. of Electrical and Computer Engineering; Agoris, D. [Public Power Corp., Athens (Greece)] [Public Power Corp., Athens (Greece)

1996-01-01T23:59:59.000Z

172

Toolkit Definitions | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Site Map Printable Version Development Adoption Compliance Regulations Resource Center Toolkit Definitions The following are definitions for common terms used within the adoption, compliance, and enforcement toolkits. Building code refers to a law or regulation used by state or local governments that establishes specifications for the design and construction of residential or commercial buildings. Building codes help ensure that new and existing residential and commercial structures meet minimum health, safety, and performance standards. In addition, building codes offer a baseline to which structures can be compared. Code adoption refers to the vehicle that establishes code requirements and their administration. Adoption can be mandatory, voluntary, or a combination of the two. The means of adoption vary with respect to the

173

MCT--The Model Coupling Toolkit  

NLE Websites -- All DOE Office Websites (Extended Search)

Model Coupling Toolkit Model Coupling Toolkit MCT is a set of open-source software tools for creating coupled models. MCT is fully parallel and can be used to couple message-passing parallel models to create a parallel coupled model. MCT is available as a small library and a set of Fortran90 modules. MCT provides model interoperability through a simple API. Two models that declare and use MCT datatypes can be coupled with a minimum of effort. MCT provides the following core coupling services: a component model registry domain decomposition descriptors communications schedulers for parallel MxN intercomponent data transfer and MxM intracomponent data redistribution a flexible and indexible (i.e., random-access) field data storage datatype a time averaging and accumulation buffer datatype

174

Assessing the wind field over the continental shelf as a resource for electric power  

E-Print Network (OSTI)

for the comparison period) that the near-coast phase advantage is obviated. We also find more consistent wind powerAssessing the wind field over the continental shelf as a resource for electric power by Richard W. Garvine1,2 and Willett Kempton1,3,4 ABSTRACT To assess the wind power resources of a large continental

Firestone, Jeremy

175

Geothermal power production: impact assessments and environmental monitoring  

SciTech Connect

The role that baseline and postoperational environmental monitoring plays in assessing impacts of geothermal power production is emphasized. Based on experience in the Imperial Valley, where substantial geothermal resources exist, the important characteristics of monitoring programs involving subsidence, seismicity, and air and water quality are examined. The importance of environmental monitoring for situations where predictive models either do not exist (e.g., seismicity), or are still being developed (e.g., land subsidence) are discussed. In these cases the need for acquiring and analyzing data that can provide timely information on changes caused by geothermal operations are emphasized. Monitoring is also useful in verifying predictions of air quality changes - in particular, violations of ambient standards after control technologies are implemented. Water quality can be monitored with existing sampling programs where the potential for geothermal impacts is thought to be rather small. The significant issues in these environmental areas, the status of baseline data and predictive capability that currently exists, and the need for future monitoring and modeling programs to assess the impacts of geothermal development are summarized.

Layton, D.W.; Pimentel, K.D.

1980-01-01T23:59:59.000Z

176

Regulatory and Permitting Information Desktop Toolkit (Fact Sheet)  

SciTech Connect

Overview of DOE's Regulatory and Permitting Information Desktop (RAPID) Toolkit project, providing information on where to go to view documents and who to contact to get involved.

Young, K.

2014-04-01T23:59:59.000Z

177

E-Print Network 3.0 - assistant toolkit edat Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Recipient's Catalog No. 4. Title and Subtitle Comprehensive Evaluation of Transportation Projects: A Toolkit... and limitations of existing methods and toolkits for...

178

WAVOS: a MATLAB toolkit for wavelet analysis and visualization of oscillatory systems  

E-Print Network (OSTI)

Open Access WAVOS: a MATLAB toolkit for wavelet analysis anduser interface within MATLAB. The interface allows for dataa comprehensive wavelet-based MATLAB toolkit that allows for

Harang, Richard; Bonnet, Guillaume; Petzold, Linda R

2012-01-01T23:59:59.000Z

179

An Assessment of Converter Modelling Needs for Offshore Wind Power Plants Connected via VSC-  

E-Print Network (OSTI)

An Assessment of Converter Modelling Needs for Offshore Wind Power Plants Connected via VSC- HVDC, especially in case of connection of offshore wind power plants (OWPPs). Modelling challenges are faced

Bak, Claus Leth

180

RELIABILITY OF WIND POWER FROM DISPERSED SITES: A PRELIMINARY ASSESSMENT  

E-Print Network (OSTI)

ON METHODOLOGY: FROM WIND POWER FREQUENCY TO LOSS-OF-LOADJ.P. , "Some Aspects of Wind Power Statistics, " J. of Appl.SCTION Reliability of Wind Power From Dispersed Sites: A Pr

Kahn, E.

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

The power balance method For aerodynamic performance assessment  

E-Print Network (OSTI)

This thesis describes the use of the power balance method for performance estimation of aircraft configurations. In this method, mechanical power production and mechanical power consumption of the aircraft are balanced, ...

Sato, Sho, Ph. D. Massachusetts Institute of Technology

2012-01-01T23:59:59.000Z

182

TO APPEAR IN IEEE TRANSACTIONS ON POWER SYSTEMS 1 Vulnerability Assessment of Cybersecurity for  

E-Print Network (OSTI)

TO APPEAR IN IEEE TRANSACTIONS ON POWER SYSTEMS 1 Vulnerability Assessment of Cybersecurity Govindarasu, Member, IEEE Abstract--Vulnerability assessment is a requirement of NERC's cybersecurity within the substation networks. Countermeasures are identified for improvement of the cybersecurity

Manimaran, Govindarasu

183

Fuzzy Failure Rate for Nuclear Power Plant Probabilistic Safety Assessment by Fault Tree Analysis  

Science Journals Connector (OSTI)

Reliability data is essential for a nuclear power plant probabilistic safety assessment by fault tree analysis ... a failure possibility-based reliability algorithm to assess nuclear event reliability data from f...

Julwan Hendry Purba; Jie Lu; Guangquan Zhang

2012-01-01T23:59:59.000Z

184

Web-based Tool for Preliminary Assessment of Wind Power Plant Design  

E-Print Network (OSTI)

Web-based Tool for Preliminary Assessment of Wind Power Plant Design Daniela Borissova1 and Ivan. Designing of reliable and cost-effective industrial wind power plant is a prerequisite for the effective use of wind power as an alternative resource. The design of a wind power plant includes the determination

Mustakerov, Ivan

185

Reliability Assessment of a Power Grid with Customer Operated CHP Systems Using Monte Carlo Simulation.  

E-Print Network (OSTI)

??This thesis presents a method for reliability assessment of a power grid with distributed generation providing support to the system. The distributed generation units considered (more)

Manohar, Lokesh Prakash

2009-01-01T23:59:59.000Z

186

Assessing the costs of solar power plants for the Island of Roatn .  

E-Print Network (OSTI)

??This is an analysis assessing the installation costs of different solar power plant technologies and the current commercial availability for installation on the Island or (more)

Huwe, Ethan (Ethan L.)

2011-01-01T23:59:59.000Z

187

Cost Estimation Methodology for NETL Assessments of Power Plant Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

Q Q Q U U A A L L I I T T Y Y G G U U I I D D E E L L I I N N E E S S F F O O R R E E N N E E R R G G Y Y S S Y Y S S T T E E M M S S T T U U D D I I E E S S C C o o s s t t E E s s t t i i m m a a t t i i o o n n M M e e t t h h o o d d o o l l o o g g y y f f o o r r N N E E T T L L A A s s s s e e s s s s m m e e n n t t s s o o f f P P o o w w e e r r P P l l a a n n t t P P e e r r f f o o r r m m a a n n c c e e March 2010 DOE/NETL-2010/???? April 2011 DOE/NETL-2011/1455 National Energy Technology Laboratory Office of Program Planning and Analysis 2 Power Plant Cost Estimation Methodology Quality Guidelines for Energy Systems Studies April 2011 Quality Guidelines for Energy Systems Studies Cost Estimation Methodology for NETL Assessments of Power Plant Performance Introduction This paper summarizes the costing methodology employed by NETL in its costing models and baseline reports. Further, it defines the specific levels of capital cost as well as outlines the costing metrics by which

188

ASSESSMENT OF COMBINED HEAT AND POWER SYSTEM "PREMIUM POWER" APPLICATIONS IN CALIFORNIA  

E-Print Network (OSTI)

Modeling with Combined Heat and Power Applications. Lawrencegeneration, combined heat and power, and thermally drivenPacific Region Combined Heat and Power Application Center (

Norwood, Zack

2010-01-01T23:59:59.000Z

189

Final Report: Assessment of Combined Heat and Power Premium Power Applications in California  

E-Print Network (OSTI)

heat and power, and thermally activated cooling equipment.and power system provides electricity and cooling to a dataand power system provides electricity and cooling to a data

Norwood, Zack

2010-01-01T23:59:59.000Z

190

A Declarative Toolkit for Rapid Experimentation Wireless Mesh Networks  

E-Print Network (OSTI)

patterns. Lack of systematic tools for rapid prototyping. #12;3 Motivation Simulation studies are useful: The Approach A development toolkit that unifies rapid prototyping, simulation and experimentation. IntegratesRapidMesh A Declarative Toolkit for Rapid Experimentation of Wireless Mesh Networks http

Loo, Boon Thau

191

ACE Learning Series - Enforcement Toolkit | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Enforcement Toolkit Enforcement Toolkit The U.S. Department of Energy's (DOE's) Building Energy Codes Program (BECP) developed this toolkit to help the enforcement community achieve higher levels of compliance with building energy codes. Although this toolkit is not intended for use by designers, developers, home owners or renters, building owners, or building operators, it may provide those individuals some insight into the issues facing the enforcement community. Publication Date: Saturday, September 1, 2012 EnforcementToolkit.pdf Document Details Document Number: PNNL-SA-90467 Prepared by: prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program Focus: Enforcement Document type: Other Target Audience: Advocate Architect/Designer

192

Asian Co-benefits Partnership (ACP) Toolkit | Open Energy Information  

Open Energy Info (EERE)

Asian Co-benefits Partnership (ACP) Toolkit Asian Co-benefits Partnership (ACP) Toolkit Jump to: navigation, search Tool Summary Name: Asian Co-benefits Partnership (ACP) Toolkit Agency/Company /Organization: Asian Co-benefits Partnership (ACP) Topics: Low emission development planning, -LEDS Resource Type: Publications References: Asian Co-benefits Partnership (ACP)[1] ACP Rio+20[2] Logo: Asian Co-benefits Partnership (ACP) Toolkit Overview "The Asian Co-benefits Partnership (ACP) provides publications and information to help mainstream climate and developmental co-benefits into decision-making processes in Asia." The Tookit "offers recent publication from ACP member organizations on themes related to co-benefits and green growth." The most recent Toolkit, from ACP's participation in Rio+20, is available

193

Online Toolkit Fosters Bioenergy Innovation | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Toolkit Fosters Bioenergy Innovation Toolkit Fosters Bioenergy Innovation Online Toolkit Fosters Bioenergy Innovation January 21, 2011 - 2:27pm Addthis Learn more about the Bioenergy Knowledge Discovery Framework, an online data sharing and mapping toolkit. Paul Bryan Biomass Program Manager, Office of Energy Efficiency & Renewable Energy What will the project do? The $241 million loan guarantee for Diamond Green Diesel, funding which will support the construction of a facility that will nearly triple the amount of renewable diesel produced domestically. The online data sharing and mapping toolkit provides the extensive data, analysis, and visualization tools to monitor the bioenergy industry. Yesterday, Secretary Chu announced a $241 million loan guarantee for Diamond Green Diesel, funding which will support the construction of a

194

Assessment of postcombustion carbon capture technologies for power generation  

Science Journals Connector (OSTI)

A significant proportion of power generation stems from coal-combustion processes and accordingly represents one of the largest point sources of CO2 emissions worldwide. Coal power plants are major assets with la...

Mikel C. Duke; Bradley Ladewig; Simon Smart

2010-06-01T23:59:59.000Z

195

RELIABILITY OF WIND POWER FROM DISPERSED SITES: A PRELIMINARY ASSESSMENT  

E-Print Network (OSTI)

POWER FREQUENCY TO LOSS-OF-LOAD PROBABIL ITY The Basic Steps Optimization of Various Kinds WIND DATA

Kahn, E.

2011-01-01T23:59:59.000Z

196

Cooling, Heating, and Power for Industry: A Market Assessment...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

sector. chpindustrymarketassessment0803.pdf More Documents & Publications Integrated Energy Systems (IES) for Buildings: A Market Assessment, September 2002 Cooling, Heating,...

197

Assessing low power reactivity levels in subcritical CANDU reactors  

SciTech Connect

A new technique has been developed for monitoring slow reactivity changes in Canadian deuterium uranium (CANDU) nuclear reactors during low power operation, following a sustained period of high power operation. The power doubling halving worth (PDHW) test tracks slow reactivity changes by evaluating the reactivity perturbation required by the power regulating system to halve and double reactor power over time. During low power operation of a CANDU reactor, the PDHW test is used to monitor the decay of the photoneutron precursors, so that the reactor power can be lowered using a preset amount of reactivity. The PDHW test is described in this paper and is validated by using computer simulations and operating data from a CANDU reactor.

Teare, S.W. [Corporation of the City of Mississauga, Ontario (Canada)] [Corporation of the City of Mississauga, Ontario (Canada); Shanes, F.C. [Ontario Hydro, Toronto, Ontario (Canada)] [Ontario Hydro, Toronto, Ontario (Canada); Hersey, M.W. [Pickering Nuclear Generating Station, Ontario (Canada)] [Pickering Nuclear Generating Station, Ontario (Canada)

1996-08-01T23:59:59.000Z

198

The Best Ever Alarm System Toolkit  

SciTech Connect

Learning from our experience with the standard Experimental Physics and Industrial Control System (EPICS) alarm handler (ALH) as well as a similar intermediate approach based on script-generated operator screens, we developed the Best Ever Alarm System Toolkit (BEAST). It is based on Java and Eclipse on the Control System Studio (CSS) platform, using a relational database (RDB) to store the configuration and log actions. It employs a Java Message Service (JMS) for communication between the modular pieces of the toolkit, which include an Alarm Server to maintain the current alarm state, an arbitrary number of Alarm Client user interfaces (GUI), and tools to annunciate alarms or log alarm related actions. Web reports allow us to monitor the alarm system performance and spot deficiencies in the alarm configuration. The Alarm Client GUI not only gives the end users various ways to view alarms in tree and table, but also makes it easy to access the guidance information, the related operator displays and other CSS tools. It also allows online configuration to be simply modified from the GUI. Coupled with a good "alarm philosophy" on how to provide useful alarms, we can finally improve the configuration to achieve an effective alarm system.

Kasemir, Kay [ORNL; Chen, Xihui [ORNL; Danilova, Katia [ORNL

2009-01-01T23:59:59.000Z

199

ParCAT: Parallel Climate Analysis Toolkit  

SciTech Connect

Climate science is employing increasingly complex models and simulations to analyze the past and predict the future of Earth s climate. This growth in complexity is creating a widening gap between the data being produced and the ability to analyze the datasets. Parallel computing tools are necessary to analyze, compare, and interpret the simulation data. The Parallel Climate Analysis Toolkit (ParCAT) provides basic tools to efficiently use parallel computing techniques to make analysis of these datasets manageable. The toolkit provides the ability to compute spatio-temporal means, differences between runs or differences between averages of runs, and histograms of the values in a data set. ParCAT is implemented as a command-line utility written in C. This allows for easy integration in other tools and allows for use in scripts. This also makes it possible to run ParCAT on many platforms from laptops to supercomputers. ParCAT outputs NetCDF files so it is compatible with existing utilities such as Panoply and UV-CDAT. This paper describes ParCAT and presents results from some example runs on the Titan system at ORNL.

Smith, Brian E [ORNL; Steed, Chad A [ORNL; Shipman, Galen M [ORNL; Ricciuto, Daniel M [ORNL; Thornton, Peter E [ORNL; Wehner, Michael [Lawrence Berkeley National Laboratory (LBNL); Williams, Dean N. [Lawrence Livermore National Laboratory (LLNL)

2013-01-01T23:59:59.000Z

200

Assessment of architectural options for surface power generation and energy storage on human Mars missions  

E-Print Network (OSTI)

of the Martian day). Given the significant policy and sustainability advantages of solar power compared-film photovoltaic arrays and energy storage technologies that is anticipated over the coming decades, solar powerAssessment of architectural options for surface power generation and energy storage on human Mars

de Weck, Olivier L.

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Fusion Energy for Power Production: Status Assessment, Identification of Challenges and Strategic Plan for Commercialization  

E-Print Network (OSTI)

1 Fusion Energy for Power Production: Status Assessment, Identification of Challenges and Strategic in the Technical Assessment Committee (TAC) and 4) EPRI being the Program Manager for the project. Establish Plan for Commercialization March 2011 Phase I. Status Assessment and Identification of Challenges

202

Subbasin Assessment Template for the Northwest Power Planning Council's Fish and Wildlife Program  

E-Print Network (OSTI)

FINAL 1 Subbasin Assessment Template for the Northwest Power Planning Council's Fish and Wildlife progress. Subbasin assessments provide technical information upon which subbasin plans and other planning but are separate and distinct technical exercises. Assessments help to estimate the resource potential of each

203

Assessment of Combined Heat and Power Premium Power Applications in California, September 2008  

Energy.gov (U.S. Department of Energy (DOE))

This report analyzes the current economic and environmental performance of combined heat and power (CHP) systems in power interruption intolerant commercial facilities in California.

204

Wind pro?le assessment for wind power purposes.  

E-Print Network (OSTI)

??Preliminary estimation of wind speed at the wind turbine hub height is critically important when planning new wind farms. Wind turbine power output is proportional (more)

Sointu, Iida

2014-01-01T23:59:59.000Z

205

Insights for Quantitative Risk Assessment of Combined Cycle Power Plants  

Science Journals Connector (OSTI)

Traditional techniques of risk analysis have been fitted for the application to combined cycle power plants and the results of several...

Gabriele Ballocco; Andrea Carpignano

2004-01-01T23:59:59.000Z

206

Transport Activity Measurement Toolkit (TAMT) | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Transport Activity Measurement Toolkit (TAMT) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Transport Activity Measurement Toolkit (TAMT) Agency/Company /Organization: World Bank Sector: Energy Focus Area: Transportation Topics: GHG inventory, Low emission development planning Resource Type: Dataset, Maps, Software/modeling tools, Video, Training materials User Interface: Website, Desktop Application Website: code.google.com/p/tamt/ Cost: Free Transport Activity Measurement Toolkit (TAMT) Screenshot References: TAMT Presentation[1] TAMT Google Site Page[2] TAMT Demonstration Videos[3] "The World Bank Latin America and the Caribbean Region Sustainable Development Department Transport Cluster in conjunction with the World

207

Reliability assessment of electrical power systems using genetic algorithms  

E-Print Network (OSTI)

of the dissertation, a GA based method for state sampling of composite generation-transmission power systems is introduced. Binary encoded GA is used as a state sampling tool for the composite power system network states. A linearized optimization load flow model...

Samaan, Nader Amin Aziz

2004-11-15T23:59:59.000Z

208

LEDS Toolkit and Framework | Open Energy Information  

Open Energy Info (EERE)

LEDS Toolkit and Framework LEDS Toolkit and Framework Jump to: navigation, search Tool Summary LAUNCH TOOL Name: LEDS Toolkit and Methodology Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy, Land, Water, Climate Topics: Low emission development planning Resource Type: Dataset User Interface: Website, Desktop Application Website: en.openei.org/apps/LEDS/ Cost: Free UN Region: Central Asia, Eastern Asia, South-Eastern Asia, "Pacific" is not in the list of possible values (Eastern Africa, Middle Africa, Northern Africa, Southern Africa, Western Africa, Caribbean, Central America, South America, Northern America, Central Asia, Eastern Asia, Southern Asia, South-Eastern Asia, Western Asia, Eastern Europe, Northern Europe, Southern Europe, Western Europe, Australia and New Zealand, Melanesia, Micronesia, Polynesia, Latin America and the Caribbean) for this property., "Latin America and Caribbean" is not in the list of possible values (Eastern Africa, Middle Africa, Northern Africa, Southern Africa, Western Africa, Caribbean, Central America, South America, Northern America, Central Asia, Eastern Asia, Southern Asia, South-Eastern Asia, Western Asia, Eastern Europe, Northern Europe, Southern Europe, Western Europe, Australia and New Zealand, Melanesia, Micronesia, Polynesia, Latin America and the Caribbean) for this property., "Western Asia & North Africa" is not in the list of possible values (Eastern Africa, Middle Africa, Northern Africa, Southern Africa, Western Africa, Caribbean, Central America, South America, Northern America, Central Asia, Eastern Asia, Southern Asia, South-Eastern Asia, Western Asia, Eastern Europe, Northern Europe, Southern Europe, Western Europe, Australia and New Zealand, Melanesia, Micronesia, Polynesia, Latin America and the Caribbean) for this property., Northern America, "South Asia" is not in the list of possible values (Eastern Africa, Middle Africa, Northern Africa, Southern Africa, Western Africa, Caribbean, Central America, South America, Northern America, Central Asia, Eastern Asia, Southern Asia, South-Eastern Asia, Western Asia, Eastern Europe, Northern Europe, Southern Europe, Western Europe, Australia and New Zealand, Melanesia, Micronesia, Polynesia, Latin America and the Caribbean) for this property., "Sub-Saharan Africa" is not in the list of possible values (Eastern Africa, Middle Africa, Northern Africa, Southern Africa, Western Africa, Caribbean, Central America, South America, Northern America, Central Asia, Eastern Asia, Southern Asia, South-Eastern Asia, Western Asia, Eastern Europe, Northern Europe, Southern Europe, Western Europe, Australia and New Zealand, Melanesia, Micronesia, Polynesia, Latin America and the Caribbean) for this property., "Western & Eastern Europe" is not in the list of possible values (Eastern Africa, Middle Africa, Northern Africa, Southern Africa, Western Africa, Caribbean, Central America, South America, Northern America, Central Asia, Eastern Asia, Southern Asia, South-Eastern Asia, Western Asia, Eastern Europe, Northern Europe, Southern Europe, Western Europe, Australia and New Zealand, Melanesia, Micronesia, Polynesia, Latin America and the Caribbean) for this property.

209

Green Power Marketing in Retail Competition: An Early Assessment  

SciTech Connect

Green power marketing-the business of selling electricity products or services based in part on their environmental values-is still in an early stage of development. This Topical Issues Brief presents a summary of early results with green power marketing under retail competition, covering both fully competitive markets and relevant direct access pilot programs. The brief provides an overview of green products that are or were offered, and discusses consumers' interest in these products. Critical issues that will impact the availability and success of green power products under retail competition are highlighted.

Wiser, R. (LBL); Fang, J.; Porter, K.; Houston, A. (NREL)

1999-02-26T23:59:59.000Z

210

Energy and Power Evaluation Program (ENPEP) | Open Energy Information  

Open Energy Info (EERE)

Energy and Power Evaluation Program (ENPEP) Energy and Power Evaluation Program (ENPEP) (Redirected from Energy and Power Evaluation Program) Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Energy and Power Evaluation Program (ENPEP-BALANCE) Agency/Company /Organization: Argonne National Laboratory Sector: Energy Topics: Baseline projection, Co-benefits assessment, Pathways analysis Resource Type: Software/modeling tools User Interface: Desktop Application Complexity/Ease of Use: Advanced Website: www.dis.anl.gov/projects/Enpepwin.html Cost: Free References: Energy and Power Evaluation Program [1] Related Tools TNAssess Energy Development Index (EDI)

211

RAPID toolkit/FAQ | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » RAPID toolkit/FAQ Jump to: navigation, search Rapid selected.png RAPIDtoolkit About FAQ Contact Us Presentations Outreach Get Involved Tools Frequently Asked Questions What does RAPID offer? The RAPID web site provides tools to aid in the permitting of renewable energy and bulk transmission projects. RAPID covers federal and state regulations for selected states. Additional states and technologies are continuously being added, so check back for new information. Does RAPID address bills that have not been enacted or regulations that have not been fully approved? No. How is RAPID maintained?

212

AC system stability analysis and assessment for Shipboard Power Systems  

E-Print Network (OSTI)

during reconfiguration. A test SPS computer model, whose simulation results were used for stability studies, is presented in this dissertation. The model used a new generalized methodology for modeling and simulating ungrounded stiffly grounded power...

Qi, Li

2006-04-12T23:59:59.000Z

213

Assessment of Projected Life-Cycle Costs for Wave, Tidal, Ocean Current, and In-Stream Hydrokinetic Power  

Energy.gov (U.S. Department of Energy (DOE))

Assessment of Projected Life-Cycle Costs for Wave, Tidal, Ocean Current, and In-Stream Hydrokinetic Power

214

Guidelines and Toolkits for Urban Transport Development in Medium Sized  

Open Energy Info (EERE)

Guidelines and Toolkits for Urban Transport Development in Medium Sized Guidelines and Toolkits for Urban Transport Development in Medium Sized Cities in India Jump to: navigation, search Tool Summary Name: Guidelines and Toolkits for Urban Transport Development in Medium Sized Cities in India Agency/Company /Organization: Asian Development Bank Focus Area: Governance - Planning - Decision-Making Structure Topics: Best Practices Complexity/Ease of Use: Not Available Website: sti-india-uttoolkit.adb.org/ Transport Toolkit Region(s): Asia Related Tools Promoting Clean Cars: Case Study of Stockholm and Sweden MOtor Vehicle Emission Simulator (MOVES) The World Bank - Transport ... further results Find Another Tool FIND TRANSPORTATION TOOLS This resource is designed to help decision makers and practitioners in states and municipal governments who are concerned with urban transport

215

ACE Learning Series - Compliance Toolkit | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Compliance Toolkit Compliance Toolkit The compliance toolkit describes the steps that should be taken by the build community to make sure that their buildings meet the requirements of the energy codes in effect where the buildings are being built and that the building designs are well documented so that the enforcement community can quickly and easily determine if the building meets the requirement of the energy code. This toolkit describes the steps that should be taken by the build community to make sure that their buildings meet the requirements of the energy codes in effect where the buildings are being built and that the building designs are well documented so that the enforcement community can quickly and easily determine if the building meets the requirement of the

216

Clean Air-Cool Planet Community Toolkit | Open Energy Information  

Open Energy Info (EERE)

Clean Air-Cool Planet Community Toolkit Clean Air-Cool Planet Community Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Clean Air-Cool Planet Community Toolkit Agency/Company /Organization: Clean Air-Cool Planet Partner: Jeffrey H. Taylor and Associates Inc. Sector: Climate Focus Area: Energy Efficiency, Buildings, - Landfill Gas, - Waste to Energy, - Solar PV, Wind, Transportation, Agriculture, People and Policy, Food Supply, - Materials, Offsets and Certificates, Greenhouse Gas Phase: Bring the Right People Together, Determine Baseline, Get Feedback, Develop Finance and Implement Projects, Create Early Successes Resource Type: Guide/manual, Case studies/examples, Templates User Interface: Website Website: www.cleanair-coolplanet.org/for_communities/toolkit_home.php

217

LEDSGP/Transportation Toolkit/Tools | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Tools < LEDSGP‎ | Transportation Toolkit(Redirected from Transportation Toolkit/Tools) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Tools for Low Emission Development Strategies in Transportation Use one of the search methods below to find tools for building sustainable, low emission development strategies (LEDS) for your country's transportation system. These resources focus on strategies to limit air pollutants and greenhouse gas emissions. Learn more in the report on LEDS for transportation. If you are aware of a relevant technical resource not

218

Activity Stream - Integrated: Geospatial Toolkit for Brazil from...  

Open Energy Info (EERE)

for Brazil from NREL 6 days ago Jay Huggins added the extra "catalog" to the dataset Integrated: Geospatial Toolkit for Brazil from NREL 8 days ago Jay Huggins updated the dataset...

219

Integrated: Geospatial Toolkit for Brazil from NREL - Datasets...  

Open Energy Info (EERE)

Brazil from NREL (Abstract): Stand-alone and easy to use geographic toolkit that allows non-GIS users to relate the renewable energy resource (solar and wind) data to other...

220

Development of the Potential Energy Savings Estimation (PESE) Toolkit  

E-Print Network (OSTI)

This study has developed a prototype computer tool called the Potential Energy Savings Estimation (PESE) Toolkit. Baltazars methodology for potential energy savings estimation from EBCx/retrofit measures has been improved in several ways...

Liu, J.; Baltazar, J. C.; Claridge, D. E.

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

LEDSGP/Transportation Toolkit/Key Actions | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Key Actions < LEDSGP‎ | Transportation Toolkit(Redirected from Transportation Toolkit/Key Actions) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a

222

Distributed Renewable Energy Finance and Policy Toolkit | Open Energy  

Open Energy Info (EERE)

Distributed Renewable Energy Finance and Policy Toolkit Distributed Renewable Energy Finance and Policy Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Distributed Renewable Energy Finance and Policy Toolkit Agency/Company /Organization: Clean Energy States Alliance (CESA) Partner: Charles Kubert and Mark Sinclair Sector: Energy Focus Area: People and Policy, Economic Development Phase: Evaluate Options, Develop Goals, Develop Finance and Implement Projects Topics: Best Practices Resource Type: Guide/manual User Interface: Other Website: www.cleanenergystates.org/Publications/cesa-financial_Toolkit_Dec2009. Cost: Free Equivalent URI: cleanenergysolutions.org/content/distributed-renewable-energy-finance- Language: English Policies: "Financial Incentives,Regulations" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property.

223

LEDSGP/Transportation Toolkit/Training | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Training < LEDSGP‎ | Transportation Toolkit(Redirected from Transportation Toolkit/Training) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Training for Low Emission Development Strategies in Transportation The LEDS GP Transport Working Group provides technical training and resources in the form of webinars, e-learning, live/recorded presentation videos, presentation files, and other knowledge exchange formats relevant to low emission development strategies in the transport sector. Below are

224

Microsoft PowerPoint - Biomass Resource Assessments and What...  

Office of Environmental Management (EM)

Biomass Resource Assessments What do you need to know? Marcus Kauffman, Oregon Dept. of Forestry Tribal Leaders Forum Series July 9, 2014 why do we care? * feedstock and raw...

225

Clean Cities: IdleBox Toolkit for Idle-Reduction Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

IdleBox Toolkit for Idle-Reduction IdleBox Toolkit for Idle-Reduction Projects to someone by E-mail Share Clean Cities: IdleBox Toolkit for Idle-Reduction Projects on Facebook Tweet about Clean Cities: IdleBox Toolkit for Idle-Reduction Projects on Twitter Bookmark Clean Cities: IdleBox Toolkit for Idle-Reduction Projects on Google Bookmark Clean Cities: IdleBox Toolkit for Idle-Reduction Projects on Delicious Rank Clean Cities: IdleBox Toolkit for Idle-Reduction Projects on Digg Find More places to share Clean Cities: IdleBox Toolkit for Idle-Reduction Projects on AddThis.com... Coordinator Basics Outreach Logos, Graphics, & Photographs Print Products & Templates Exhibit Booths Presentations Videos QR Codes Tips Education & Webinars Meetings Reporting Contacts IdleBox Toolkit for Idle-Reduction Projects

226

Life Cycle Assessment for Emerging Technologies: Case Studies for Photovoltaic and Wind Power (11 pp)  

Science Journals Connector (OSTI)

The life cycle inventory analysis for photovoltaic power shows that each production ... be important for specific elementary flows. A life cycle impact assessment (LCIA) shows that there ... Material consumption...

Niels Jungbluth; Christian Bauer

2005-01-01T23:59:59.000Z

227

Impact assessment of nuclear and thermal power plants on zooplankton in cooling ponds  

Science Journals Connector (OSTI)

The current state of assessment of nuclear and thermal power plant toxic effects on zooplankton entrained in ... particular emphasis is given to specific features of cooling reservoirs and their ecosystems. Compl...

N. V. Kartasheva; D. V. Fomin; A. V. Popov

2008-09-01T23:59:59.000Z

228

A Set-Theoretic Framework to Assess the Impact of Variable Generation on the Power Flow  

E-Print Network (OSTI)

´inguez-Garc´ia, Member, IEEE Abstract--The increased penetration of renewable resources, such as wind and solar penetration of renewable resources of electricity, such as wind and solar, into existing power systems. Since to assess whether power system static state vari- ables, i.e., bus voltage magnitudes and angles, remain

Liberzon, Daniel

229

Assessing Power Substation Network Security and Survivability: A Work in Progress Report1  

E-Print Network (OSTI)

infrastructure systems whose disruption would have an enormous impact on all of our lives. One of the most critical infrastructure systems identified was the electric power grid since this system supports all other], Probability Risk Assessment (PRA) [7], a prototype expert system [3], and a set of checklists from power

Krings, Axel W.

230

Assessment of Metal Media Filters for Advanced Coal-Based Power Generation Applications  

SciTech Connect

Advanced coal and biomass-based gas turbine power generation technologies (IGCC, PFBC, PCFBC, and Hipps) are currently under development and demonstration. Efforts at Siemens Westinghouse Power Corporation (SWPC) have been focused on the development and demonstration of hot gas filter systems as an enabling technology for power generation. This paper reviews SWPC's material and component assessment efforts, identifying the performance, stability, and life of porous metal, advanced alloy, and intermetallic filters under simulated, pressurized fluidized-bed combustion conditions.

Alvin, M.A.

2002-09-19T23:59:59.000Z

231

Draft Environmental Assessment Ormat Nevada Northern Nevada Geothermal Power Plant Projects  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9 9 FINAL ENVIRONMENTAL ASSESSMENT Ormat Nevada Northern Nevada Geothermal Power Plant Projects Department of Energy Loan Guarantee for ORMAT LLC's Tuscarora Geothermal Power Plant, Elko County, Nevada; Jersey Valley Geothermal Project, Pershing County, Nevada; and McGinness Hills Geothermal Project, Lander County, Nevada U.S. Department of Energy Loan Guarantee Program Office Washington, D.C. 20585 August 2011 NORTHERN NEVADA GEOTHERMAL POWER PLANT PROJECTS - ORMAT NEVADA AUGUST 2011 FINAL ENVIRONMENTAL ASSESSMENT i TABLE OF CONTENTS 1.0 INTRODUCTION.................................................................................................................1 1.1 SUMMARY AND LOCATION OF PROPOSED ACTION .....................................................1

232

Performance Assessment of Flashed Steam Geothermal Power Plant  

SciTech Connect

Five years of operating experience at the Comision Federal de Electricidad (CFE) Cerro Prieto flashed steam geothermal power plant are evaluated from the perspective of U. S. utility operations. We focus on the design and maintenance of the power plant that led to the achievement of high plant capacity factors for Units No. 1 and 2 since commercial operation began in 1973. For this study, plant capacity factor is the ratio of the average load on the machines or equipment for the period of time considered to the capacity rating of the machines or equipment. The plant capacity factor is the annual gross output in GWh compared to 657 GWh (2 x 37.5 MW x 8760 h). The CFE operates Cerro Prieto at base load consistent with the system connected electrical demand of the Baja California Division. The plant output was curtailed during the winter months of 1973-1975 when the system electric demand was less than the combined output capability of Cerro Prieto and the fossil fuel plant near Tijuana. Each year the system electric demand has increased and the Cerro Prieto units now operate at full load all the time. The CFE added Units 3 and 4 to Cerro Prieto in 1979 which increased the plant name plate capacity to 150 MW. Part of this additional capacity will supply power to San Diego Gas and Electric Company through an interconnection across the border. The achievement of a high capacity factor over an extensive operating period was influenced by operation, design, and maintenance of the geothermal flash steam power plant.

Alt, Theodore E.

1980-12-01T23:59:59.000Z

233

Treatment of biodiversity issues in impact assessment of electricity power transmission lines: A Finnish case review  

Science Journals Connector (OSTI)

The Environmental Impact Assessment (EIA) process concerning the route of a 400 kV power transmission line between Loviisa and Hiki in southern Finland was reviewed in order to assess how biodiversity issues are treated and to provide suggestions on how to improve the effectiveness of treatment of biodiversity issues in impact assessment of linear development projects. The review covered the whole assessment process, including interviews of stakeholders, participation in the interest group meetings and review of all documents from the project. The baseline studies and assessment of direct impacts in the case study were detailed but the documentation, both the assessment programme and the assessment report, only gave a partial picture of the assessment process. All existing information, baseline survey and assessment methods should be addressed in the scoping phase in order to promote interaction between all stakeholders. In contrast to the assessment of the direct effects, which first emphasized impacts on the nationally important and protected flying squirrel but later expanded to deal with the assessment of impacts on ecologically important sites, the indirect and cumulative impacts of the power line were poorly addressed. The public was given the opportunity to become involved in the EIA process. However, they were more concerned with impacts on their properties and less so on biodiversity and species protection issues. This suggests that the public needs to become more informed about locally important features of biodiversity.

Tarja Sderman

2006-01-01T23:59:59.000Z

234

Energy and Power Evaluation Program (ENPEP) | Open Energy Information  

Open Energy Info (EERE)

Energy and Power Evaluation Program (ENPEP) Energy and Power Evaluation Program (ENPEP) (Redirected from ENPEP) Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Energy and Power Evaluation Program (ENPEP-BALANCE) Agency/Company /Organization: Argonne National Laboratory Sector: Energy Topics: Baseline projection, Co-benefits assessment, Pathways analysis Resource Type: Software/modeling tools User Interface: Desktop Application Complexity/Ease of Use: Advanced Website: www.dis.anl.gov/projects/Enpepwin.html Cost: Free References: Energy and Power Evaluation Program [1] Related Tools TNAssess Energy Development Index (EDI) Tool for Selecting CDM Methods & Technologies

235

Energy and Power Evaluation Program (ENPEP) | Open Energy Information  

Open Energy Info (EERE)

Energy and Power Evaluation Program (ENPEP) Energy and Power Evaluation Program (ENPEP) Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Energy and Power Evaluation Program (ENPEP-BALANCE) Agency/Company /Organization: Argonne National Laboratory Sector: Energy Topics: Baseline projection, Co-benefits assessment, Pathways analysis Resource Type: Software/modeling tools User Interface: Desktop Application Complexity/Ease of Use: Advanced Website: www.dis.anl.gov/projects/Enpepwin.html Cost: Free References: Energy and Power Evaluation Program [1] Related Tools TNAssess Energy Development Index (EDI) Tool for Selecting CDM Methods & Technologies

236

Grid-Connected Renewable Energy Generation Toolkit-Wind | Open Energy  

Open Energy Info (EERE)

Grid-Connected Renewable Energy Generation Toolkit-Wind Grid-Connected Renewable Energy Generation Toolkit-Wind Jump to: navigation, search Tool Summary Name: Grid-Connected Renewable Energy Generation Toolkit-Wind Agency/Company /Organization: United States Agency for International Development Sector: Energy Focus Area: Wind Resource Type: Training materials Website: www.energytoolbox.org/gcre/mod_6/index.shtml Grid-Connected Renewable Energy Generation Toolkit-Wind Screenshot References: Grid-Connected Renewable Energy Generation Toolkit-Wind[1] Logo: Grid-Connected Renewable Energy Generation Toolkit-Wind GCREwind.JPG References ↑ "Grid-Connected Renewable Energy Generation Toolkit-Wind" Retrieved from "http://en.openei.org/w/index.php?title=Grid-Connected_Renewable_Energy_Generation_Toolkit-Wind&oldid=375084"

237

Grid-Connected Renewable Energy Generation Toolkit-Solar | Open Energy  

Open Energy Info (EERE)

Grid-Connected Renewable Energy Generation Toolkit-Solar Grid-Connected Renewable Energy Generation Toolkit-Solar Jump to: navigation, search Tool Summary Name: Grid-Connected Renewable Energy Generation Toolkit-Solar Agency/Company /Organization: United States Agency for International Development Sector: Energy Focus Area: Solar Resource Type: Training materials Website: www.energytoolbox.org/gcre/mod_5/index.shtml Grid-Connected Renewable Energy Generation Toolkit-Solar Screenshot References: Grid-Connected Renewable Energy Generation Toolkit-Solar[1] Logo: Grid-Connected Renewable Energy Generation Toolkit-Solar GCREsolar.JPG References ↑ "Grid-Connected Renewable Energy Generation Toolkit-Solar" Retrieved from "http://en.openei.org/w/index.php?title=Grid-Connected_Renewable_Energy_Generation_Toolkit-Solar&oldid=375083

238

SciTech Connect: Guide to Using the WIND Toolkit Validation Code  

Office of Scientific and Technical Information (OSTI)

Toolkit Validation Code In response to the U.S. Department of Energy's goal of using 20% wind energy by 2030, the Wind Integration National Dataset (WIND) Toolkit was created to...

239

The ProxyGator Server-side Wireless Toolkit Dushiant Kochhar and Abdelsalam (Sumi) Helal  

E-Print Network (OSTI)

The ProxyGator ­ Server-side Wireless Toolkit Dushiant Kochhar and Abdelsalam (Sumi) Helal Computer significantly. To reduce the development time, we are introducing the ProxyGator toolkit. It is a server infrastructure is built within Visual C++ 6.0 IDE. We present the ProxyGator Toolkit and give an analysis to show

Helal, Abdelsalam

240

RSVC: A Reliable Distributed Control Software Development Toolkit Control Software Group  

E-Print Network (OSTI)

RSVC: A Reliable Distributed Control Software Development Toolkit Jie Chen Control Software Group- velop a toolkit for building reliable and fault-tolerant distributed software. This paper describes a C++ toolkit (RSVC) that reduces e ort of development of reliable distributed control software. Keywords

Mao, Weizhen

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Calculating the offshore wind power resource: Robust assessment methods applied to the U.S. Atlantic Coast  

E-Print Network (OSTI)

Calculating the offshore wind power resource: Robust assessment methods applied to the U 2011 Available online xxx Keywords: Wind power Offshore wind power Resource assessment Marine spatial of an offshore area. The method uses publicly available oceanic, environmental and socio-economic data

Firestone, Jeremy

242

Assessment of HVAC sound power data for sensitive spaces.  

Science Journals Connector (OSTI)

Certification testing of air handling unit sound power (PWL) indicates that individual unit PWL can vary significantly from manufacturer published data. Published data are typically based on a limited number of actual tests with results extrapolated for other fan sizes and operating conditions. Although published data are normally acceptable for routine applications indiscriminate use for sensitive designs (studios theaters conference centers etc.) can result in excessive finished space noise levels. The fact that the design goals have been exceeded can be accurately documented. The exact reason for the exceedance however cannot be as firmly established in a complex system. Certification PWL testing of air handling units prior to installation can detect PWL variations from the published data. Individual unit PWL certification was often not cost effective prior to the developement of sound intensity and the establishment and use of recognized standards for in situ PWL testing (e.g. ASA 104?1992 ANSI S.12.12.1992). Case histories to be presented document fan PWL variations from published data of up to 10 dB and higher in certain octave bands.

Kevin C. Miller; Martin J. Beam

1996-01-01T23:59:59.000Z

243

Demonstration of Recessed Downlight Technologies: Power and Illumination Assessment  

SciTech Connect

Solid state lighting (SSL), specifically light-emitting diodes (LED), has been advancing at a rapid pace, and there are presently multiple products available that serve as direct replacements for traditional luminaires. In this demonstration, conventional recessed lights in a conference room were used to compare conventional incandescent A-lamps, incandescent reflector R-lamps, dimming compact fluorescent lamps (CFL), to an LED replacement product. The primary focus during the study was on light delivered to the task plane as provided by the power required by the lighting system. Vertical illuminance, dimming range, and color shift are also important indicators of lighting quality and are discussed in the report. The results clearly showed that LEDs, with dimming-capable drivers, are much more efficient than incandescent and CFLs. Further, LEDs provide much smoother and consistent dimming than dimmable CFLs. On the potential negative side, it is important that the dimming switch be identified as compatible with the LED driver. A wide variety of dimmer switches are capable of dimming LEDs down to 15% of full light output, while select others can be capable of dimming LEDs down to 5%. In addition, LEDs can be intensive light sources, which can result in uncomfortable glare in some applications and to some occupants. Higher ceiling (9-foot or greater) or non-specular reflectors can act to alleviate the potential for glare.

Parker, Steven A.; Beeson, Tracy A.

2009-11-20T23:59:59.000Z

244

DOE/EA-1753 FINAL ENVIRONMENTAL ASSESSMENT FOR THE BEACON POWER CORPORATION  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE/EA-1753 DOE/EA-1753 FINAL ENVIRONMENTAL ASSESSMENT FOR THE BEACON POWER CORPORATION FLYWHEEL FREQUENCY REGULATION PLANT, CHICAGO HEIGHTS, ILLINOIS (SITE 1), AND HAZLE TOWNSHIP, PENNSYLVANIA (SITE 2) U.S. Department of Energy National Energy Technology Laboratory Arpil 2011 DOE/EA-1753 FINAL ENVIRONMENTAL ASSESSMENT FOR THE BEACON POWER CORPORATION FLYWHEEL FREQUENCY REGULATION PLANT, CHICAGO HEIGHTS, ILLINOIS (SITE 1), AND HAZLE TOWNSHIP, PENNSYLVANIA (SITE 2) U.S. Department of Energy National Energy Technology Laboratory April 2011 DOE/EA-1753 iii April 2011 COVER SHEET Responsible Agency: U.S. Department of Energy (DOE) Title: Final Environmental Assessment for the Beacon Power Corporation Flywheel Frequency Regulation Plant, Chicago Heights, Illinois (Site 1), and Hazle Township, Pennsylvania

245

Cosmological toolkit project featured on DOE energy website | Argonne  

NLE Websites -- All DOE Office Websites (Extended Search)

Cosmological toolkit project featured on DOE energy website Cosmological toolkit project featured on DOE energy website October 2, 2013 Tweet EmailPrint Researchers from Argonne National Laboratory, in partnership with Fermilab and Lawrence Berkeley National Laboratory, are developing a state-of-the-art toolkit for analyzing cosmological simulation data. The work was recently featured on the DOE website Energy.gov. Leading the Argonne team are Salman Habib, senior physicist and computational scientist in Argonne's High Energy Physics and Mathematics and Computer Science Divisions, and Ravi Madduri, project manager in the MCS Division. The multilaboratory team seeks to create an open platform with a web-based front end that will allow scientists to transfer, search, and analyze the complex data being generated by galaxy-formation simulations. Key to this

246

Building Energy Codes ENFORCEMENT TOOLKIT BUILDING TECHNOLOGIES PROGRAM  

NLE Websites -- All DOE Office Websites (Extended Search)

ENFORCEMENT TOOLKIT ENFORCEMENT TOOLKIT BUILDING TECHNOLOGIES PROGRAM Building Energy Codes ACE LEARNING SERIES i Building Energy Codes ENFORCEMENT TOOLKIT Prepared by: Building Energy Codes Program The U.S. Department of Energy's Building Energy Codes Program is an information resource on energy codes and standards for buildings. They work with other government agencies, state and local jurisdictions, organizations that develop model codes and standards, and building industry to promote codes that will provide for energy and environmental benefits and help foster adoption of, compliance with, and enforcement of those codes. September 2012 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 PNNL-SA-90467 LEARNING SERIES OVERVIEW Building Energy Codes ACE

247

Service and product provider's marketing toolkit | ENERGY STAR Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Service and product provider's marketing toolkit Service and product provider's marketing toolkit Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In this section How can ENERGY STAR help your business? Get started Join ENERGY STAR as a partner ENERGY STAR service & product provider training series Service and product provider's marketing toolkit Industry initiatives ENERGY STAR sales tools for service and product providers

248

Building Energy Codes COMPLIANCE TOOLKIT BUILDING TECHNOLOGIES PROGRAM  

NLE Websites -- All DOE Office Websites (Extended Search)

COMPLIANCE TOOLKIT COMPLIANCE TOOLKIT BUILDING TECHNOLOGIES PROGRAM Building Energy Codes ACE LEARNING SERIES III Building Energy Codes COMPLIANCE TOOLKIT Prepared by: Building Energy Codes Program (BECP) The U.S. Department of Energy's (DOE) Building Energy Codes Program (BECP) is an information resource on energy codes and standards for buildings. They work with other government agencies, state and local jurisdictions, organizations that develop model codes and standards, and building industry to promote codes that will provide for energy and environmental benefits and help foster adoption of, compliance with, and enforcement of those codes. September 2012 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 PNNL-SA-90466 LEARNING SERIES OVERVIEW Building Energy Codes

249

Building Energy Codes ADOPTION TOOLKIT BUILDING TECHNOLOGIES PROGRAM  

NLE Websites -- All DOE Office Websites (Extended Search)

ADOPTION TOOLKIT ADOPTION TOOLKIT BUILDING TECHNOLOGIES PROGRAM Building Energy Codes ACE LEARNING SERIES I Building Energy Codes ADOPTION TOOLKIT Prepared by: Building Energy Codes Program (BECP) The U.S. Department of Energy's (DOE) Building Energy Codes Program (BECP) is an information resource on energy codes and standards for buildings. They work with other government agencies, state and local jurisdictions, organizations that develop model codes and standards, and building industry to promote codes that will provide for energy and environmental benefits and help foster adoption of, compliance with, and enforcement of those codes. September 2012 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 PNNL-SA-89963 LEARNING SERIES OVERVIEW Building Energy Codes

250

LEDSGP/Transportation Toolkit/Training | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Training < LEDSGP‎ | Transportation Toolkit Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Training for Low Emission Development Strategies in Transportation The LEDS GP Transport Working Group provides technical training and resources in the form of webinars, e-learning, live/recorded presentation videos, presentation files, and other knowledge exchange formats relevant to low emission development strategies in the transport sector. Below are links to relevant online training/learning sites. To suggest additional

251

LEDSGP/Transportation Toolkit/Key Actions | Open Energy Information  

Open Energy Info (EERE)

Actions Actions < LEDSGP‎ | Transportation Toolkit Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low-emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a way that complements existing climate and development goals in other sectors. Planners, researchers, and decision-makers should customize this LEDS implementation framework for the specific conditions of their transport sector, choosing from relevant resources to achieve a comprehensive action

252

Report to Congress on Assessment of Potential Impact of Concentrating Solar Power for Electriicty Generation (EPACT 2005--Section 934(c))  

SciTech Connect

Summary of DOE's assessment of issues regarding EPAct 2005, which requires the Secretary of Energy to assess conflicting guidance on the economic potential of concentrating solar power for electricity production.

Wilkins, F.

2007-02-01T23:59:59.000Z

253

Grid-Connected Renewable Energy Generation Toolkit-Biomass | Open Energy  

Open Energy Info (EERE)

Grid-Connected Renewable Energy Generation Toolkit-Biomass Grid-Connected Renewable Energy Generation Toolkit-Biomass Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Grid-Connected Renewable Energy Generation Toolkit-Biomass Agency/Company /Organization: United States Agency for International Development Sector: Energy Focus Area: Biomass Resource Type: Training materials Website: www.energytoolbox.org/gcre/mod_2/index.shtml#update Grid-Connected Renewable Energy Generation Toolkit-Biomass Screenshot References: Grid-Connected Renewable Energy-Biomass[1] Logo: Grid-Connected Renewable Energy Generation Toolkit-Biomass Biomass Toolkit References ↑ "Grid-Connected Renewable Energy-Biomass" Retrieved from "http://en.openei.org/w/index.php?title=Grid-Connected_Renewable_Energy_Generation_Toolkit-Biomass&oldid=375080

254

An Assessment of Energy Potential at Non-Powered Dams in the United States  

Energy.gov (U.S. Department of Energy (DOE))

An Assessment of Energy Potential at Non-Powered Dams in the United States- The United States has produced clean, renewable electricity from hydropower for more than 100 years, but hydropower producing facilities represent only a fraction of the infrastructure development that has taken place on the nations waterways.

255

Risk Informed Assessment of Regulatory and Design Requirements for Future Nuclear Power Plants - Final Technical Report  

SciTech Connect

OAK B188 Summary of methods proposed for risk informing the design and regulation of future nuclear power plants. All elements of the historical design and regulation process are preserved, but the methods proposed for new plants use probabilistic risk assessment methods as the primary decision making tool.

Ritterbusch, Stanley; Golay, Michael; Duran, Felicia; Galyean, William; Gupta, Abhinav; Dimitrijevic, Vesna; Malsch, Marty

2003-01-29T23:59:59.000Z

256

Dynamical safety assessment of hydrogen production nuclear power plants using system dynamics method  

Science Journals Connector (OSTI)

Nuclear power plants for hydrogen production are investigated in the aspect of nuclear safety. The non-linear dynamical safety assessment is introduced for the analysis of the high temperature gas cooled reactor (HTGR) which is used for hydrogen production as well as electricity generation. The dynamical algorithm is adjusted for the safety assessment with an easier and reliable output. A feedback of power increase affects to the temperature decrease. The top event of the event is power and temperature stable. It is affected by the human factor, poison, and some other physical variables. There are several factors including the economic and safety factors which are considered for the reliability of the modelling simulations. Using the system dynamics (SD) method, the event quantification is performed for the event flows, stocks, and feedback by the single and double arrow lines.

Taeho Woo; Soonho Lee

2013-01-01T23:59:59.000Z

257

Integrated: Geospatial Toolkit for Brazil from NREL - Download...  

Open Energy Info (EERE)

66baaf1f-6d30-4cd2-888d-2e4ecff5ecdbresource8161382f-e58b-4e60-9558-340561151156downloadbrazgst172.zip Download Executable Toolkit & Documentation No preview available. More...

258

Visual toolkit for network security experiment specification and data analysis  

Science Journals Connector (OSTI)

The increasing availability of network testbeds and the benefits of visualization-based security study call for the emergence of supporting tools for network security research. In this article we present ESVT, an integrated experiment specification and ... Keywords: animated topology, experiment specification, testbed, visual toolkit

L. Li; P. Liu; G. Kesidis

2006-11-01T23:59:59.000Z

259

A Hack-Free RTS Game Toolkit Michael Buro  

E-Print Network (OSTI)

ORTS A Hack-Free RTS Game Toolkit Michael Buro RTDS-Meeting Oct/25/2002 Outline RTS Games Sophisticated distributed game AI Competition on server Hack-free client software Server-Side Game Simulation Server-Side Simulation Benefits Client hacks useless. Fair competition! All unit commands

Buro, Michael

260

Waste Toolkit A-Z Plastic cups Grundon  

E-Print Network (OSTI)

Waste Toolkit A-Z Plastic cups ­ Grundon Can I recycle plastic cups? Yes, you can recycle plastic cups if they are made from PET or HDPE plastic (ask your supplier to confirm the type of plastic if you do not know). If the cups are made from any other type of plastic (see symbols below) they cannot

Melham, Tom

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

ORBIT -Operating-Regime-Based Modeling and Identi cation Toolkit  

E-Print Network (OSTI)

projects. The MATLAB-based software tool is called ORBIT (Operating-Regime-Based modeling and Identi cation, Norway. ORBIT is a MATLAB-based toolkit for black-box and grey-box mod- eling of non-linear dynamic feature of ORBIT, compared for example to the MATLAB Fuzzy Logic Toolbox, is the strong focus

Foss, Bjarne A.

262

Capturing and Using Knowledge about the Use of Visualization Toolkits  

SciTech Connect

When constructing visualization pipelines using toolkits such as Visualization Toolkit (VTK) and Generic Mapping Tools (GMT), developers must understand (1) what toolkit operators will transform their data from its raw state to some required view state and (2) what viewers are available to present the generated view. Traditionally, developers learn about how to construct visualization pipelines by reading documentation and inspecting code examples, which can be costly in terms of the time and effort expended. Once an initial pipeline is constructed, developers may still have to undergo a trial and error process before a satisfactory visualization is generated. This paper presents the Visualization Knowledge Project (VisKo) that is built on a knowledge base of visualization toolkit operators and how they can be piped together to form visualization pipelines. Developers may now rely on VisKo to guide them when constructing visualization pipelines and in some cases, when VisKo has complete knowledge about some set of operators (i.e., sequencing and parameter settings), automatically generate a fully functional visualization pipeline.

Del Rio, Nicholas R.; Pinheiro da Silva, Paulo

2012-11-02T23:59:59.000Z

263

GRANT AND CONTRACT ACCOUNTING GRANT REVIEW TOOLKIT POST AWARD PROCESS  

E-Print Network (OSTI)

GRANT AND CONTRACT ACCOUNTING ­ GRANT REVIEW TOOLKIT POST AWARD PROCESS Page 1 of 7 POST AWARD PROCESS The below information is a brief overview of the Post Award Process that Grant and Contract responsibilities, as they relate to the post award management and compliance of sponsored projects. Grant

Heller, Barbara

264

Architecture 2030 District Toolkit- 2014 BTO Peer Review  

Energy.gov (U.S. Department of Energy (DOE))

Presenter: Cindy Regnier, Lawrence Berkeley National Laboratory This project aims to create programmatic guidance and a technical toolkit to support the promotion, development, and execution of 2030 District energy efficiency savings programs for small commercial office and retail buildings across the nation.

265

Using the Model Coupling Toolkit to couple earth system models  

Science Journals Connector (OSTI)

Continued advances in computational resources are providing the opportunity to operate more sophisticated numerical models. Additionally, there is an increasing demand for multidisciplinary studies that include interactions between different physical ... Keywords: COAMPS, Model Coupling Toolkit, Model coupling, ROMS, SWAN, Sparse matrix interpolation

John C. Warner; Natalie Perlin; Eric D. Skyllingstad

2008-10-01T23:59:59.000Z

266

Negotiating river ecosystems: Impact assessment and conflict mediation in the cases of hydro-power construction  

SciTech Connect

In this paper we discuss how the legitimacy of the impact assessment process is a key issue in conflict mediation in environmental impact assessment. We contrast two EIA cases in hydro-power generation plans made for the Ii River, Finland in different decades, and evaluate how impact assessment in these cases has contributed to the creation, mediation and resolution of conflicts. We focus on the elements of distributional and procedural justice that made the former EIA process more legitimate and consensual and the latter more conflictual. The results indicate that it is crucial for conflict mediation to include all the values and interests of the parties in the goal-setting process and in the definition and assessment of alternatives. The analysis also indicates that procedural justice is the most important to help the people and groups involved to accept the legitimacy of the impact assessment process: how different parties and their values and interests are recognized, and how participation and distribution of power are organized in an impact assessment process. It is confirmed in this article that SIA may act as a mediator or a forum providing a process through which competing knowledge claims, various values and interests can be discussed and linked to the proposed alternatives and interventions.

Karjalainen, Timo P., E-mail: timopauli.karjalainen@oulu.f [Thule Institute, University of Oulu, P.O. Box 7300, FI-90014 University of Oulu (Finland); Jaervikoski, Timo, E-mail: timo.jarvikoski@oulu.f [Unit of Sociology, University of Oulu, P.O. Box 2000, FI-90014 University of Oulu (Finland)

2010-09-15T23:59:59.000Z

267

An assessment of governmental wind power programmes in Swedenusing a systems approach  

Science Journals Connector (OSTI)

The purpose of this paper is to assess the effects, the cost efficiency, and the goal achievement of policy instruments aimed for the development and deployment of wind power in Sweden during the period 1975 to 2000. The paper presents an empirical example of a socio-technical system-based approach for impact assessment, in which changes in the wind power system are described and analysed with respect to technology development, cost development and actors involvement. The results show that the policy instruments were not designed to have a broad, system-oriented perspective but targeted and included restricted technology conceptsi.e. large, two-bladed turbinesand limited involvement of actors. The assessment shows that early inflexible steering of technology and market development, together with a lack of comprehensive, long-term strategy, lack of continuity in policy interventions and weak combinations of policy programmes and measures have contributed to a very limited wind power development in Sweden. A rough cost efficiency analysis reveals that Sweden has much less wind power installed in relation to expenditures on various support than Germany and Spain. The Swedish policy instruments did, however, achieve the Government's goals to increase wind energy production.

K. strand; L. Neij

2006-01-01T23:59:59.000Z

268

Wind Working Group Toolkit | Open Energy Information  

Open Energy Info (EERE)

abundant wind resources for electric power generation will help the United States reduce air pollution and greenhouse gas emissions, diversify the country's energy supply, provide...

269

A feasibility assessment of magnetic bearings for free-piston Stirling space power converters  

SciTech Connect

This report describes work performed by Mechanical Technology Incorporated (MTI) under NASA Contract NAS3-26061, {open_quotes}A Feasibility Assessment of Magnetic Bearings for Free-Piston Stirling Space Engines.{close_quotes} The work was performed over the period from July 1990 through August 1991. The objective of the effort was to assess the feasibility and efficacy of applying magnetic bearings to free-piston Stirling-cycle power conversion machinery of the type currently being evaluated for possible use in future long-term space missions.

Curwen, P.W.; Rao, D.K.; Wilson, D.S. [Mechanical Technology Inc., Latham, NY (United States)

1992-06-01T23:59:59.000Z

270

Risk assessment of toxic pollutants from fossil fuel power plants: Final report  

SciTech Connect

This report describes the development and application of a methodology for assessing the control costs and chronic health risks of toxic pollutant emissions from coal-fired electric power plants. The approach emphasizes surface water discharges and pollution, but incorporates emissions to air, water, soil, and groundwater and transfers of pollutants between these media. The components of the general framework include (1) pollutant emission characterization, (2) environmental transport and fate analysis, (3) population exposure calculation, and (4) quantitative health risk assessment. The report provides a basic overview of the approach, discusses each component in detail, and describes its application to an hypothetical, simplified case study. 234 refs., 32 figs., 32 tabs.

Bolten, J.G.; Morrison, P.F.; Solomon, K.A.

1987-08-01T23:59:59.000Z

271

Life cycle assessment of a biomass gasification combined-cycle power system  

SciTech Connect

The potential environmental benefits from biomass power are numerous. However, biomass power may also have some negative effects on the environment. Although the environmental benefits and drawbacks of biomass power have been debated for some time, the total significance has not been assessed. This study serves to answer some of the questions most often raised in regard to biomass power: What are the net CO{sub 2} emissions? What is the energy balance of the integrated system? Which substances are emitted at the highest rates? What parts of the system are responsible for these emissions? To provide answers to these questions, a life cycle assessment (LCA) of a hypothetical biomass power plant located in the Midwest United States was performed. LCA is an analytical tool for quantifying the emissions, resource consumption, and energy use, collectively known as environmental stressors, that are associated with converting a raw material to a final product. Performed in conjunction with a technoeconomic feasibility study, the total economic and environmental benefits and drawbacks of a process can be quantified. This study complements a technoeconomic analysis of the same process, reported in Craig and Mann (1996) and updated here. The process studied is based on the concept of power Generation in a biomass integrated gasification combined cycle (BIGCC) plant. Broadly speaking, the overall system consists of biomass production, its transportation to the power plant, electricity generation, and any upstream processes required for system operation. The biomass is assumed to be supplied to the plant as wood chips from a biomass plantation, which would produce energy crops in a manner similar to the way food and fiber crops are produced today. Transportation of the biomass and other materials is by both rail and truck. The IGCC plant is sized at 113 MW, and integrates an indirectly-heated gasifier with an industrial gas turbine and steam cycle. 63 refs., 34 figs., 32 tabs.

Mann, M.K.; Spath, P.L.

1997-12-01T23:59:59.000Z

272

Knowledge brokerage - potential for increased capacities and shared power in impact assessment  

SciTech Connect

Constructive and collaborative planning theory has exposed the perceived limitations of public participation in impact assessment. At strategic levels of assessment the established norm can be misleading and practice is illusive. For example, debates on SEA effectiveness recognize insufficiencies, but are often based on questionable premises. The authors of this paper argue that public participation in strategic assessment requires new forms of information and engagement, consistent with the complexity of the issues at these levels and that strategic assessments can act as knowledge brokerage instruments with the potential to generate more participative environments and attitudes. The paper explores barriers and limitations, as well as the role of knowledge brokerage in stimulating the engagement of the public, through learning-oriented processes and responsibility sharing in more participative models of governance. The paper concludes with a discussion on building and inter-change of knowledge, towards creative solutions to identified problems, stimulating learning processes, largely beyond simple information transfer mechanisms through consultative processes. The paper argues fundamentally for the need to conceive strategic assessments as learning platforms and design knowledge brokerage opportunities explicitly as a means to enhance learning processes and power sharing in IA. - Highlights: Black-Right-Pointing-Pointer Debates on SEA recognize insufficiencies on public participation Black-Right-Pointing-Pointer We propose new forms of engagement consistent with complex situations at strategic levels of decision-making Black-Right-Pointing-Pointer Constructive and collaborative planning theories help explain how different actors acquire knowledge and the value of knowledge exchange Black-Right-Pointing-Pointer Strategic assessments can act as knowledge brokerage instruments Black-Right-Pointing-Pointer The paper argues for strategic assessments as learning platforms as a means to enhance learning processes and power sharing in IA.

Rosario Partidario, Maria, E-mail: mrp@civil.ist.utl.pt [Instituto Superior Tecnico, Lisbon, Portugal, Av. Rovisco Pais, 1049-001 LISBOA (Portugal); Sheate, William R., E-mail: w.sheate@imperial.ac.uk [Centre for Environmental Policy, Imperial College London, South Kensington Campus, London SW7 2AZ (United Kingdom); Collingwood Environmental Planning Ltd, London, 1E, The Chandlery, 50 Westminster Bridge Road, London SE1 7QY (United Kingdom)

2013-02-15T23:59:59.000Z

273

DOE ORDER 5480.14, PHASE I - INSTALLATION ASSESSMENT FOR THE BETTIS ATOMIC POWER LABORATORY  

Office of Legacy Management (LM)

DOE ORDER 5480.14, PHASE I - INSTALLATION ASSESSMENT FOR THE BETTIS ATOMIC POWER LABORATORY Prepared for the U.S. Department of Energy by Westinghouse Electric Corporation West Mifflin, Pennsylvania 15122-0079 i' Vendor Contract Number: DE-ACll-76PN00014 : IAELE OF CONTENTS I. Executive Summary ............................................. 2. Introduction .................................................. a. Background......;.........................................i b. Authority .......................................................... : ; c. Purpose I ........................................................ 3 d Scope..................................................~..! e: Methodology...............................................! ........

274

Economic Assessment and Impacts Assessment of Plug-In Hybrid Vehicles on Electric Utilities And Regional U.S. Power Grids  

SciTech Connect

Part 2 provides an economic assessment of the impacts of PHEV adoption on vehicle owners and on electric utilities. The paper finds favorable impacts on LCC to vehicle owners, and average costs of power for both types of utilities.

Scott, Michael J.; Kintner-Meyer, Michael CW; Elliott, Douglas B.; Warwick, William M.

2007-01-31T23:59:59.000Z

275

Economic Assessment And Impacts Assessment Of Plug-In Hybrid Vehicles On Electric Utilities And Regional U.S. Power Grids  

SciTech Connect

Part 2 provides an economic assessment of the impacts of PHEV adoption on vehicle owners and on electric utilities. The paper finds favorable impacts on LCC to vehicle owners, and average costs of power for both types of utilities.

Scott, Michael J.; Kintner-Meyer, Michael CW; Elliott, Douglas B.; Warwick, William M.

2007-01-22T23:59:59.000Z

276

Published assessments bearing on the future use of ceramic superconductors by the electric power sector  

SciTech Connect

Much has been written about ceramic superconductors since their discovery in 1986. Most of this writing reports and describes scientific research. However, some authors have sought to put this research in context: to assess where the field stands, what might be technically feasible, what might be economically feasible, and what potential impacts ceramic superconductors will bring to the electric power sector. This report`s purpose is to make the results of already published assessments readily available. To that end, this report lists and provides abstracts for various technical and economic assessments related to applications of High-Temperature Superconductors (HTS) to the electric power sector. Those studies deemed most important are identified and summarized. These assessments were identified by two means. First, members of the Executive Committee identified some reports as worthy of consideration and forwarded them to Argonne National Laboratory. Twelve assessments were selected. Each of these is listed and summarized in the following section. Second, a bibliographic search was performed on five databases: INSPEC, NTIS, COMPENDEX, Energy Science & Technology, and Electric Power Database. The search consisted of first selecting all papers related to High Temperature Superconductors. Then papers related to SMES, cables, generators, motors, fault current limiters, or electric utilities were selected. When suitable variants of the above terms were included, this resulted in a selection of 493 citations. These citations were subjected to review by the authors. A number of citations were determined to be inappropriate (e.g. a number referred to digital transmission lines for electronics and communications applications). The reduced list consisted of 200 entries. Each of these citations, with an abstract, is presented in the following sections.

Giese, R.F.; Wolsky, A.M.

1992-08-25T23:59:59.000Z

277

Published assessments bearing on the future use of ceramic superconductors by the electric power sector  

SciTech Connect

Much has been written about ceramic superconductors since their discovery in 1986. Most of this writing reports and describes scientific research. However, some authors have sought to put this research in context: to assess where the field stands, what might be technically feasible, what might be economically feasible, and what potential impacts ceramic superconductors will bring to the electric power sector. This report's purpose is to make the results of already published assessments readily available. To that end, this report lists and provides abstracts for various technical and economic assessments related to applications of High-Temperature Superconductors (HTS) to the electric power sector. Those studies deemed most important are identified and summarized. These assessments were identified by two means. First, members of the Executive Committee identified some reports as worthy of consideration and forwarded them to Argonne National Laboratory. Twelve assessments were selected. Each of these is listed and summarized in the following section. Second, a bibliographic search was performed on five databases: INSPEC, NTIS, COMPENDEX, Energy Science Technology, and Electric Power Database. The search consisted of first selecting all papers related to High Temperature Superconductors. Then papers related to SMES, cables, generators, motors, fault current limiters, or electric utilities were selected. When suitable variants of the above terms were included, this resulted in a selection of 493 citations. These citations were subjected to review by the authors. A number of citations were determined to be inappropriate (e.g. a number referred to digital transmission lines for electronics and communications applications). The reduced list consisted of 200 entries. Each of these citations, with an abstract, is presented in the following sections.

Giese, R.F.; Wolsky, A.M.

1992-08-25T23:59:59.000Z

278

An assessment of mercury emissions and health risks from a coal-fired power plant  

SciTech Connect

Title 3 of the 1990 Clean Air Act Amendments (CAAA) mandated that the US Environmental Protection Agency (EPA) evaluate the need to regulate mercury emissions from electric utilities. In support of this forthcoming regulatory analysis the U.S. DOE, sponsored a risk assessment project at Brookhaven (BNL) to evaluate methylmercury (MeHg) hazards independently. In the US MeHg is the predominant way of exposure to mercury originated in the atmosphere. In the BNL study, health risks to adults resulting from Hg emissions from a hypothetical 1,000 MW coal-fired power plant were estimated using probabilistic risk assessment techniques. This study showed that the effects of emissions of a single power plant may double the background exposures to MeHg resulting from consuming fish obtained from a localized area near the power plant. Even at these more elevated exposure levels, the attributable incidence in mild neurological symptoms was estimated to be quite small, especially when compared with the estimated background incidence in the population. The current paper summarizes the basic conclusions of this assessment and highlights issues dealing with emissions control and environmental transport.

Fthenakis, V.M.; Lipfert, F.; Moskowitz, P. [Brookhaven National Lab., Upton, NY (United States). Analytical Sciences Div.

1994-12-01T23:59:59.000Z

279

Toolkit for Public-Private Partnerships in Roads and Highways | Open Energy  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » Toolkit for Public-Private Partnerships in Roads and Highways Jump to: navigation, search Tool Summary Name: Toolkit for Public-Private Partnerships in Roads and Highways Agency/Company /Organization: World Bank Sector: Energy Focus Area: Transportation Resource Type: Guide/manual User Interface: Website Website: www.ppiaf.org/ppiaf/sites/ppiaf.org/files/documents/toolkits/highwayst Cost: Free Toolkit for Public-Private Partnerships in Roads and Highways Screenshot References: Toolkit for Public-Private Partnerships in Roads and Highways[1] "The Toolkit for Public-Private Partnership in Roads and Highways is to

280

A novel approach for efficiency assessment of conventional power plants based on principal component analysis  

Science Journals Connector (OSTI)

The investigation of performance efficiency and productivity in power generation sector has become a need due to the importance of energy consumption in the world. Several studies have concentrated on the performance assessment of conventional power plants through mathematical and statistical methods. This paper presents a novel approach based on principal component analysis (PCA) for efficiency assessment of conventional power plants. This study considers the previous approaches, namely: data envelopment analysis (DEA) and PCA for ranking of decision-making units (DMUs). The applicability and superiority of the proposed approach is shown for 15 actual conventional power plants. We also applied the proposed approach to other datasets in previous studies to show its advantages. The numerical results showed that the proposed approach provides better solution than previous studies. It has been shown that in some cases the effect of the number of efficient units is contrary to what previous studies have already predicted. Moreover, the results of the novel approach provide better rankings than previous studies.

Ali Azadeh; Mahmoud Ghiasi Moaser

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Performance Based Service Acquisition Toolkit | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Guidance Guidance » Contracting for Support Services » Performance Based Service Acquisition Toolkit Performance Based Service Acquisition Toolkit Performance-based Service Acquisition (PBA) means an acquisition structured around the results to be achieved as opposed to the manner by which the work is to be performed. Performance-based Work Statement (PWS) means that a statement of work for performance-based acquisitions that describes the required results in clear, specific and objective terms with measurable outcomes. Statement of Objectives (SOO) means a Government-prepared document incorporated into the solicitation that states the overall performance objectives. It is used in solicitations when the Government intends to provide the maximum flexibility to each offeror to propose an innovative

282

A new development cycle of the Statistical Toolkit  

E-Print Network (OSTI)

The Statistical Toolkit is an open source system specialized in the statistical comparison of distributions. It addresses requirements common to different experimental domains, such as simulation validation (e.g. comparison of experimental and simulated distributions), regression testing in the course of the software development process, and detector performance monitoring. Various sets of statistical tests have been added to the existing collection to deal with the one sample problem (i.e. the comparison of a data distribution to a function, including tests for normality, categorical analysis and the estimate of randomness). Improved algorithms and software design contribute to the robustness of the results. A simple user layer dealing with primitive data types facilitates the use of the toolkit both in standalone analyses and in large scale experiments.

Batic, M; Pfeiffer, A; Pia, M G; Ribon, A

2012-01-01T23:59:59.000Z

283

Monitoring the grid with the globus toolkit MDS4.  

SciTech Connect

The Globus Toolkit Monitoring and Discovery System (MDS4) defines and implements mechanisms for service and resource discovery and monitoring in distributed environments. MDS4 is distinguished from previous similar systems by its extensive use of interfaces and behaviors defined in the WS-Resource Framework and WS-Notification specifications, and by its deep integration into essentially every component of the Globus Toolkit. We describe the MDS4 architecture and the Web service interfaces and behaviors that allow users to discover resources and services, monitor resource and service states, receive updates on current status, and visualize monitoring results. We present two current deployments to provide insights into the functionality that can be achieved via the use of these mechanisms.

Schopf, J. M.; Pearlman, L.; Miller, N.; Kesselman, C.; Foster, I.; D'Arcy, M.; Chervenak, A.; Mathematics and Computer Science; Univ. of Chicago; Univ. of Southern California; Univ. of Edinburgh

2006-01-01T23:59:59.000Z

284

WAVOS: a MATLAB toolkit for wavelet analysis and visualization of oscillatory systems  

Science Journals Connector (OSTI)

We have presented WAVOS: a comprehensive wavelet-based MATLAB toolkit that allows for easy visualization, exploration... http://sourceforge.net/projects/wavos/files/ ...

Richard Harang; Guillaume Bonnet; Linda R Petzold

2012-03-01T23:59:59.000Z

285

LEDSGP/Transportation Toolkit/Key Actions/Prioritize and Plan...  

Open Energy Info (EERE)

Transportation Toolkit Home Tools Training Request Assistance Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for...

286

A Molecular Modeling Toolkit with Applications to Efficient Free Energy Computation.  

E-Print Network (OSTI)

??In this thesis we develop a molecular modeling toolkit that models the conformation space of proteins and allows easy prototyping of algorithms on the conformation (more)

Tezcan, Hasan Gokhan

2010-01-01T23:59:59.000Z

287

Environmental assessment of coal ash ponds of thermal power plants in the south of the Russian Far East  

Science Journals Connector (OSTI)

The results of environmental assessment of ash ponds of thermal power plants in Vladivostok and Khabarovsk are given. High radioactivity of coal in the Russian Far East is responsible ... accumulation of radionuc...

V. P. Zvereva; L. T. Krupskaya

2013-12-01T23:59:59.000Z

288

Techno-Economic Assessment of Polymer Membrane Systems for Postcombustion Carbon Capture at Coal-Fired Power Plants  

Science Journals Connector (OSTI)

Techno-Economic Assessment of Polymer Membrane Systems for Postcombustion Carbon Capture at Coal-Fired Power Plants ... The HHVs for three coals are 30?840, 19?400, and 14?000 kJ/kg, respectively. ...

Haibo Zhai; Edward S. Rubin

2013-02-13T23:59:59.000Z

289

FINAL ENVIRONMENTAL ASSESSMENT FOR A COMBINED POWER AND BIOMASS HEATING SYSTEM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FOR A COMBINED POWER AND BIOMASS HEATING SYSTEM FORT YUKON, ALASKA U.S. Department of Energy Office of Energy Efficiency and Renewable Energy GOLDEN FIELD OFFICE In Cooperation with USDA RURAL UTILITIES SERVICE DENALI COMMISSION APRIL 2013 ABBREVIATIONS AND ACRONYMS ADEC Alaska Department of Environmental Conservation AFRPA Alaska Forest Resources Practices Act BFE Base Flood Elevation BMP best management practice BTU British Thermal Unit CATG Council of Athabascan Tribal Governments CEQ Council on Environmental Quality CFR Code of Federal Regulations CHP Combined Heat and Power CO carbon monoxide CO 2 carbon dioxide CWA Clean Water Act dBA A-weighted decibel DBH diameter at breast height DOE U.S. Department of Energy EA Environmental Assessment

290

Assessment of the radiological impact of a decommissioning nuclear power plant in Italy  

E-Print Network (OSTI)

The assessment of the radiological impact of a decommissioning Nuclear Power Plant is presented here through the results of an environmental monitoring survey carried out in the area surrounding the Garigliano Power Plant. The levels of radioactivity in soil, water, air and other environmental matrices are shown, in which {\\alpha}, {\\beta} and {\\gamma} activity and {\\gamma} equivalent dose rate are measured. Radioactivity levels of the samples from the Garigliano area are analyzed and then compared to those from a control zone situated more than 100 km away. Moreover, a comparison is made with a previous survey held in 2001. The analyses and comparisons show no significant alteration in the radiological characteristics of the area surroundings the plant, with an overall radioactivity depending mainly from the global fallout and natural sources.

A. Petraglia; C. Sabbarese; M. De Cesare; N. De Cesare; F. Quinto; F. Terrasi; A. D'Onofrio; P. Steier; L. K. Fifield; A. M. Esposito

2012-07-17T23:59:59.000Z

291

Assessment of the radiological impact of a decommissioning nuclear power plant in Italy  

E-Print Network (OSTI)

The assessment of the radiological impact of a decommissioning Nuclear Power Plant is presented here through the results of an environmental monitoring survey carried out in the area surrounding the Garigliano Power Plant. The levels of radioactivity in soil, water, air and other environmental matrices are shown, in which {\\alpha}, {\\beta} and {\\gamma} activity and {\\gamma} equivalent dose rate are measured. Radioactivity levels of the samples from the Garigliano area are analyzed and then compared to those from a control zone situated more than 100 km away. Moreover, a comparison is made with a previous survey held in 2001. The analyses and comparisons show no significant alteration in the radiological characteristics of the area surroundings the plant, with an overall radioactivity depending mainly from the global fallout and natural sources.

Petraglia, A; De Cesare, M; De Cesare, N; Quinto, F; Terrasi, F; D'Onofrio, A; Steier, P; Fifield, L K; Esposito, A M; 10.1051/radiopro/2012010

2012-01-01T23:59:59.000Z

292

Dynamic safeguard assessment of terror attacks using system dynamics method for nuclear power plants  

Science Journals Connector (OSTI)

For the minimisation of the damage in possible terror attacks on the nuclear power plants and other nuclear facilities, a dynamic assessment is performed in the aspects of nuclear safeguard. The incidents against nuclear facilities are modelled by the time-step scenario. Several cases are explained for the illicit trafficking of radioactive material. The dynamic simulation is examined by the system dynamics method. In the modelling, there are three major models that include the nuclear insider terror, the reaction control and the nuclear forensic steps. The risk increases slowly and decreases rapidly in the result. This is the similar pattern of the September 2001 terror where many lives were lost.

Tae-Ho Woo; Un-Chul Lee; Yun-Il Kim

2010-01-01T23:59:59.000Z

293

White Paper to California Energy Commission on Assessment of Concentrated Solar Power David Barlev, Ruxandra Vidu, Pieter Stroeve  

E-Print Network (OSTI)

1 White Paper to California Energy Commission on Assessment of Concentrated Solar Power David Barlev, Ruxandra Vidu, Pieter Stroeve California Solar Energy Collaborative, University of California is put into the harvest and storage of solar energy for power generation. There are two mainstream

Islam, M. Saif

294

IMPACTS ASSESSMENT OF PLUG-IN HYBRID VEHICLES ON ELECTRIC UTILITIES AND REGIONAL U.S. POWER GRIDS  

E-Print Network (OSTI)

IMPACTS ASSESSMENT OF PLUG-IN HYBRID VEHICLES ON ELECTRIC UTILITIES AND REGIONAL U.S. POWER GRIDS National Laboratory(a) ABSTRACT The U.S. electric power infrastructure is a strategic national asset with the emerging plug-in hybrid electric vehicle (PHEV) technology to meet the majority of the daily energy needs

295

IEEE TRANSACTIONS ON POWER SYSTEMS, VOL. 22, NO. 1, FEBRUARY 2007 85 A Reinforcement Learning Model to Assess Market  

E-Print Network (OSTI)

IEEE TRANSACTIONS ON POWER SYSTEMS, VOL. 22, NO. 1, FEBRUARY 2007 85 A Reinforcement Learning Model to Assess Market Power Under Auction-Based Energy Pricing Vishnuteja Nanduri, Student Member, IEEE, and Tapas K. Das, Member, IEEE Abstract--Auctions serve as a primary pricing mechanism in various market

Tesfatsion, Leigh

296

Mobile Computing with the Rover Toolkit Anthony D. Joseph, Joshua A. Tauber, and M. Frans Kaashoek  

E-Print Network (OSTI)

Mobile Computing with the Rover Toolkit Anthony D. Joseph, Joshua A. Tauber, and M. Frans Kaashoek@lcs.mit.edu Abstract Rover is a software toolkit that supports the construction of both mobile­transparent and mobile­aware appli­ cations. The objective of the mobile­transparent approach is to develop proxies for system

Joseph, Anthony D.

297

Mobile Computing with the Rover Toolkit Anthony D. Joseph, Joshua A. Tauber, and M. Frans Kaashoek  

E-Print Network (OSTI)

Mobile Computing with the Rover Toolkit Anthony D. Joseph, Joshua A. Tauber, and M. Frans Kaashoek@lcs.mit.edu Abstract Rover is a software toolkit that supports the construction of both mobile-transparent and mobile-aware appli- cations. The objective of the mobile-transparent approach is to develop proxies for system

Han, Richard Y.

298

American Institute of Aeronautics and Astronautics Development of a Distributed Design Toolkit for Analyzing  

E-Print Network (OSTI)

American Institute of Aeronautics and Astronautics 1 Development of a Distributed Design Toolkit - SUNY, Buffalo, NY, 14260 The distribution of a complex system design problem into smaller, coupled a toolkit that enables the modeling and analysis of distributed design process architectures using basic

Lewis, Kemper E.

299

TECA: A Parallel Toolkit for Extreme Climate Analysis  

SciTech Connect

We present TECA, a parallel toolkit for detecting extreme events in large climate datasets. Modern climate datasets expose parallelism across a number of dimensions: spatial locations, timesteps and ensemble members. We design TECA to exploit these modes of parallelism and demonstrate a prototype implementation for detecting and tracking three classes of extreme events: tropical cyclones, extra-tropical cyclones and atmospheric rivers. We process a modern TB-sized CAM5 simulation dataset with TECA, and demonstrate good runtime performance for the three case studies.

Prabhat, Mr; Ruebel, Oliver; Byna, Surendra; Wu, Kesheng; Li, Fuyu; Wehner, Michael; Bethel, E. Wes

2012-03-12T23:59:59.000Z

300

Fact Sheet: Cyber Security Audit and Attack Detection Toolkit  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Audit and Audit and Attack Detection Toolkit Adding control system intelligence to widely deployed enterprise vulnerability scanners and security event managers While many energy utilities employ vulnerability scanners and security event managers (SEM) on their enterprise systems, these tools often lack the intelligence necessary to be effective in control systems. This two-year project aims to integrate control system intelligence into widely deployed vulnerability scanners and SEM, and to integrate security incident detection intelligence into control system historians. These upgrades will be provided at no or a low cost to control system asset owners. The popular Nessus Vulnerability Scanner supports an audit plug-in that gathers configuration information from

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

An in-depth assessment of hybrid solargeothermal power generation  

Science Journals Connector (OSTI)

Abstract A major problem faced by many standalone geothermal power plants, particularly in hot and arid climates such as Australia, is the adverse effects of diurnal temperature change on the operation of air-cooled condensers which typically leads to fluctuation in the power output and degradation of thermal efficiency. This study is concerned with the assessment of hybrid solargeothermal power plants as a means of boosting the power output and where possible moderating the impact of diurnal temperature change. The ultimate goal is to explore the potential benefits from the synergies between the solar and geothermal energy sources. For this purpose the performances of the hybrid systems in terms of power output and the cost of electricity were compared with that of stand-alone solar and geothermal plants. Moreover, the influence of various controlling parameters including the ambient temperature, solar irradiance, geographical location, resource quality, and the operating mode of the power cycle on the performance of the hybrid system were investigated under steady-state conditions. Unsteady-state case studies were also performed to examine the dynamic behaviour of hybrid systems. These case studies were carried out for three different Australian geographic locations using raw hourly meteorological data of a typical year. The process simulation package Aspen-HYSYS was used to simulate plant configurations of interest. Thermodynamic analyses carried out for a reservoir temperature of 120C and a fixed brine flow rate of 50kg/s revealed that under Australian climatic conditions (with a typical ambient temperature of 31C in summer) a hybrid plant would outperform stand-alone geothermal and solar power plants if at least 68% of its energy input is met by solar energy (i.e. a solar energy fraction of ?68%). This figure drops to about 19% for reservoir temperatures greater than 170C. Case studies also showed that, for a mid-range reservoir temperature of 150C, the cost of electricity production can be reduced by 20% when a hybrid plant is used instead of the stand-alone Enhanced Geothermal System (EGS).

Cheng Zhou; Elham Doroodchi; Behdad Moghtaderi

2013-01-01T23:59:59.000Z

302

Climate and energy: a comparative assessment of the Satellite Power System (SPS) and alternative energy technologies  

SciTech Connect

The potential effects of five energy technologies on global, regional, and local climate were assessed. The energy technologies examined were coal combustion, light water nuclear reactors, satellite power systems, terrestrial photovoltaics, and fusion. The assessment focused on waste heat rejection, production of particulate aerosols, and emissions of carbon dioxide. The current state of climate modeling and long-range climate prediction introduces considerable uncertainty into the assessment, but it may be concluded that waste heat will not produce detectable changes in global climate until world energy use increases 100-fold, although minor effects on local weather may occur now; that primary particulate emissions from coal combustion constitute a small percentage of total atmospheric particulates; that carbon dioxide from coal combustion in the US alone accounts for about 30% of the current increase in global atmospheric CO/sub 2/, which may, by about 2050, increase world temperature 2 to 3/sup 0/C, with pronounced effects on world climate; that rocket exhaust from numerous launches during construction of an SPS may affect the upper atmosphere, with uncertain consequences; and that much research in climatology is needed before potential effects can be quantitatively predicted with any confidence. Although climatic impact is an appropriate concern in formulating long-term energy policy, the level of uncertainty about it suggests that it is not currently useful as a decision criterion. 88 references.

Kellermeyer, D.A.

1980-01-01T23:59:59.000Z

303

Regulatory and Permitting Information Desktop (RAPID) Toolkit (Poster)  

SciTech Connect

The Regulatory and Permitting Information Desktop (RAPID) Toolkit combines the former Geothermal Regulatory Roadmap, National Environmental Policy Act (NEPA) Database, and other resources into a Web-based tool that gives the regulatory and utility-scale geothermal developer communities rapid and easy access to permitting information. RAPID currently comprises five tools - Permitting Atlas, Regulatory Roadmap, Resource Library, NEPA Database, and Best Practices. A beta release of an additional tool, the Permitting Wizard, is scheduled for late 2014. Because of the huge amount of information involved, RAPID was developed in a wiki platform to allow industry and regulatory agencies to maintain the content in the future so that it continues to provide relevant and accurate information to users. In 2014, the content was expanded to include regulatory requirements for utility-scale solar and bulk transmission development projects. Going forward, development of the RAPID Toolkit will focus on expanding the capabilities of current tools, developing additional tools, including additional technologies, and continuing to increase stakeholder involvement.

Young, K. R.; Levine, A.

2014-09-01T23:59:59.000Z

304

Assessing employment in renewable energy technologies: A case study for wind power in Brazil  

Science Journals Connector (OSTI)

Abstract Environmental concerns and the search for climate change mitigation have led to the deployment of renewable energy technologies (RET) in several countries. The adoption of incentive policies, especially those based on heavy subsides, has motivated the discussion of social and economic benefits brought about by these technologies, mainly on the impact on employment rates. In this context, several studies have been conducted to quantify job creation by RET, concluding that the latter are more labor intensive than traditional fossil fueled technologies. However, results for different assessments vary largely due to distinct methodological approaches, and are frequently highly aggregated. Thus, results are not comparable or applicable to other contexts. Previous studies have failed to quantify the effects of imports and exports of RET equipment in total employment, usually associating employment and installed capacity in the year studied. This study has aimed to address these issues, creating an index for employment quantification based on production, instead of installed, capacity. We have estimated both direct jobs in manufacture, construction, and operation and management, and indirect jobs both in the upstream supply chains of materials and inputs to manufacture of wind turbines and construction of wind farms. We have also performed an assessment of jobs created in wind energy projects which are expected to begin operation in Brazil until 2017. The resulting job potential in Brazil corresponds to13.5 persons-year equivalent for each MW installed between manufacture and first year of operation of a wind power plant, and 24.5 persons-year equivalent over the wind farm lifetime. Results show that major contribution from wind power for job creation are in the construction stage and, despite of the low amount of jobs created in operation and maintenance relative to new installed capacity, those stable jobs stand out as they persist over the entire wind farm's life time.

Moana Simas; Sergio Pacca

2014-01-01T23:59:59.000Z

305

A safety and regulatory assessment of generic BWR and PWR permanently shutdown nuclear power plants  

SciTech Connect

The long-term availability of less expensive power and the increasing plant modification and maintenance costs have caused some utilities to re-examine the economics of nuclear power. As a result, several utilities have opted to permanently shutdown their plants. Each licensee of these permanently shutdown (PSD) plants has submitted plant-specific exemption requests for those regulations that they believe are no longer applicable to their facility. This report presents a regulatory assessment for generic BWR and PWR plants that have permanently ceased operation in support of NRC rulemaking activities in this area. After the reactor vessel is defueled, the traditional accident sequences that dominate the operating plant risk are no longer applicable. The remaining source of public risk is associated with the accidents that involve the spent fuel. Previous studies have indicated that complete spent fuel pool drainage is an accident of potential concern. Certain combinations of spent fuel storage configurations and decay times, could cause freshly discharged fuel assemblies to self heat to a temperature where the self sustained oxidation of the zircaloy fuel cladding may cause cladding failure. This study has defined four spent fuel configurations which encompass all of the anticipated spent fuel characteristics and storage modes following permanent shutdown. A representative accident sequence was chosen for each configuration. Consequence analyses were performed using these sequences to estimate onsite and boundary doses, population doses and economic costs. A list of candidate regulations was identified from a screening of 10 CFR Parts 0 to 199. The continued applicability of each regulation was assessed within the context of each spent fuel storage configuration and the results of the consequence analyses.

Travis, R.J.; Davis, R.E.; Grove, E.J.; Azarm, M.A. [Brookhaven National Lab., Upton, NY (United States)

1997-08-01T23:59:59.000Z

306

Redundancy Method to assess Electromigration Lifetime in power grid design Boukary OUATTARA 1,2, Lise DOYEN 1, David NEY 1, Habib MEHREZ 2 , Pirouz BAZARGAN-  

E-Print Network (OSTI)

Redundancy Method to assess Electromigration Lifetime in power grid design Boukary OUATTARA 1). This phenomenon becomes critical in deep submicron design technology. In this paper we assess chip power grid prediction. In this paper we analyze the impact of EM degradation in power grid on a chip functionalities. We

Paris-Sud XI, Université de

307

TY JOUR T1 Life Cycle Assessment of Electric Power Systems JF Annual Review of Environment and Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Life Cycle Assessment of Electric Power Systems Life Cycle Assessment of Electric Power Systems JF Annual Review of Environment and Resources A1 Eric R Masanet A1 Yuan Chang A1 Anand R Gopal A1 Peter H Larsen A1 William R Morrow A1 Roger Sathre A1 Arman Shehabi A1 Pei Zhai KW electricity KW energy policy KW environmental analysis KW life cycle impact KW life cycle inventory AB p The application of life cycle assessment LCA to electric power EP technologies is a vibrant research pursuit that is likely to continue as the world seeks ways to meet growing electricity demand with reduced environmental and human health impacts While LCA is an evolving methodology with a number of barriers and challenges to its effective use LCA studies to date have clearly improved our understanding of the life cycle energy

308

A suite of metrics for assessing the performance of solar power forecasting  

Science Journals Connector (OSTI)

Abstract Forecasting solar energy generation is a challenging task because of the variety of solar power systems and weather regimes encountered. Inaccurate forecasts can result in substantial economic losses and power system reliability issues. One of the key challenges is the unavailability of a consistent and robust set of metrics to measure the accuracy of a solar forecast. This paper presents a suite of generally applicable and value-based metrics for solar forecasting for a comprehensive set of scenarios (i.e., different time horizons, geographic locations, and applications) that were developed as part of the U.S. Department of Energy SunShot Initiatives efforts to improve the accuracy of solar forecasting. In addition, a comprehensive framework is developed to analyze the sensitivity of the proposed metrics to three types of solar forecasting improvements using a design-of-experiments methodology in conjunction with response surface, sensitivity analysis, and nonparametric statistical testing methods. The three types of forecasting improvements are (i) uniform forecasting improvements when there is not a ramp, (ii) ramp forecasting magnitude improvements, and (iii) ramp forecasting threshold changes. Day-ahead and 1-hour-ahead forecasts for both simulated and actual solar power plants are analyzed. The results show that the proposed metrics can efficiently evaluate the quality of solar forecasts and assess the economic and reliability impacts of improved solar forecasting. Sensitivity analysis results show that (i) all proposed metrics are suitable to show the changes in the accuracy of solar forecasts with uniform forecasting improvements, and (ii) the metrics of skewness, kurtosis, and Rnyi entropy are specifically suitable to show the changes in the accuracy of solar forecasts with ramp forecasting improvements and a ramp forecasting threshold.

Jie Zhang; Anthony Florita; Bri-Mathias Hodge; Siyuan Lu; Hendrik F. Hamann; Venkat Banunarayanan; Anna M. Brockway

2015-01-01T23:59:59.000Z

309

Transverse space charge effect calculation in the Synergia accelerator modeling toolkit  

SciTech Connect

This paper describes a transverse space charge effect calculation algorithm, developed in the context of accelerator modeling toolkit Synergia. The introduction to the space charge problem and the Synergia modeling toolkit short description are given. The developed algorithm is explained and the implementation is described in detail. As a result of this work a new space charge solver was developed and integrated into the Synergia toolkit. The solver showed correct results in comparison to existing Synergia solvers and delivered better performance in the regime where it is applicable.

Okonechnikov, Konstantin; Amundson, James; Macridin, Alexandru; /Fermilab

2009-09-01T23:59:59.000Z

310

Environmental assessment for the satellite power system-concept development and evaluation program-microwave health and ecological effects  

SciTech Connect

This report is concerned with the potential health and ecological effects of the microwave beam from the microwave power transmission system (MPTS) of the satellite power system (SPS). The report is written in the form of a detailed critical review of selected scientific articles from the published literature on the biological effects of nonionizing electromagnetic radiation, followed by an assessment of the possible effects of the SPS, based on exposure values for the reference system (US DOE and NASA, 1978).

Not Available

1980-11-01T23:59:59.000Z

311

Life Cycle Assessment of a Parabolic Trough Concentrating Solar Power Plant and the Impacts of Key Design Alternatives  

Science Journals Connector (OSTI)

To inform capacity expansion decisions, hybrid life cycle assessment is used to evaluate a reference design of a parabolic trough concentrating solar power (CSP) facility located in Daggett, CA, along four sustainability metrics: life cycle (LC) greenhouse gas (GHG) emissions, water consumption, cumulative energy demand (CED), and energy payback time (EPBT). ... Power plant system: components typically associated with the power block (e.g., turbine generator set), in addition to other balance-of-plant components, such as buildings, roads, and parking lots. ... The majority of the remaining water consumption is attributed to water consumed during the manufacturing phase (10% of LC or 0.47 L/kWh). ...

John J. Burkhardt; III; Garvin A. Heath; Craig S. Turchi

2011-02-23T23:59:59.000Z

312

Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IV. Commercial potential  

SciTech Connect

This volume of the Nonproliferation Alternative Systems Assessment Program (NASAP) report provides time and cost estimates for positioning new nuclear power systems for commercial deployment. The assessment also estimates the rates at which the new systems might penetrate the domestic market, assuming the continuing viability of the massive light-water reactor network that now exists worldwide. This assessment does not recommend specific, detailed program plans and budgets for individual systems; however, it is clear from this analysis that any of the systems investigated could be deployed if dictated by national interest.

Not Available

1980-06-01T23:59:59.000Z

313

Cyber Security Audit and Attack Detection Toolkit: National SCADA Test Bed  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Audit and Attack Detection Toolkit: National SCADA Audit and Attack Detection Toolkit: National SCADA Test Bed May 2008 Cyber Security Audit and Attack Detection Toolkit: National SCADA Test Bed May 2008 This project of the cyber security audit and attack detection toolkit is adding control system intelligence to widely deployed enterprise vulnerability scanners and security event managers While many energy utilities employ vulnerability scanners and security event managers (SEM) on their enterprise systems, these tools often lack the intelligence necessary to be effective in control systems. This two-year project aims to integrate control system intelligence into widely deployed vulnerability scanners and SEM, and to integrate security incident detection intelligence into control system historians. These upgrades will

314

Assessment  

NLE Websites -- All DOE Office Websites (Extended Search)

Genetic Genetic Variability of Cell Wall Degradability for the Selection of Alfalfa with Improved Saccharification Efficiency Marc-Olivier Duceppe & Annick Bertrand & Sivakumar Pattathil & Jeffrey Miller & Yves Castonguay & Michael G. Hahn & Réal Michaud & Marie-Pier Dubé # Her Majesty the Queen in Right of Canada 2012 Abstract Alfalfa (Medicago sativa L.) has a high potential for sustainable bioethanol production, particularly because of its low reliance on N fertilizer. We assessed near-infrared reflec- tance spectroscopy (NIRS) as a high-throughput technique to measure cell wall (CW) degradability in a large number of lignified alfalfa stem samples. We also used a powerful immu- nological approach, glycome profiling, and chemical analyses to increase our knowledge of the composition of CW poly- saccharides of alfalfa stems with various levels

315

Environmental assessment for the Satellite Power System (SPS) Concept Development and Evaluation Program (CDEP). [Microwave and non-microwave health and ecological assessment  

SciTech Connect

In the satellite power system (SPS), satellites in geosynchronous earth orbit would collect solar energy in space, convert it to microwaves, and transmit the microwaves to receiving antennas (rectennas) on earth. At the rectennas, the microwave energy would be converted to electricity. This SPS environmental assessment considers the microwave and nonmicrowave effects on the terrestrial environment and human health, atmospheric effects, and effects on electromagnetic systems. No environmental problem has been identified that would preclude the continued study of SPS technology. To increase the certainty of the assessment, some research has been initiated and long-term research is being planned.

Valentino, A.R.

1980-08-01T23:59:59.000Z

316

PART 1 OF TUTORIAL ON EXTREMES TOOLKIT (1) Installation of R software  

E-Print Network (OSTI)

PART 1 OF TUTORIAL ON EXTREMES TOOLKIT (1) Installation of R software R-2.9.2-win32.exe Use default options (2) Installation of Extremes Toolkit extRemes (R package for extreme value analysis): extRemes_1.60.zip ismev (R package used by extRemes): ismev_1.34.zip Lmoments (R package used by extRemes): Lmoments

Katz, Richard

317

An assessment of solar-powered organic Rankine cycle systems for combined heating and power in UK domestic applications  

Science Journals Connector (OSTI)

Abstract Performance calculations are presented for a small-scale combined solar heat and power (CSHP) system based on an Organic Rankine Cycle (ORC), in order to investigate the potential of this technology for the combined provision of heating and power for domestic use in the UK. The system consists of a solar collector array of total area equivalent to that available on the roof of a typical UK home, an ORC engine featuring a generalised positive-displacement expander and a water-cooled condenser, and a hot water storage cylinder. Preheated water from the condenser is sent to the domestic hot water cylinder, which can also receive an indirect heating contribution from the solar collector. Annual simulations of the system are performed. The electrical power output from concentrating parabolic-trough (PTC) and non-concentrating evacuated-tube (ETC) collectors of the same total array area are compared. A parametric analysis and a life-cycle cost analysis are also performed, and the annual performance of the system is evaluated according to the total electrical power output and cost per unit generating capacity. A best-case average electrical power output of 89W (total of 776kWh/year) plus a hot water provision capacity equivalent to ?80% of the total demand are demonstrated, for a whole system capital cost of 27003900. Tracking \\{PTCs\\} are found to be very similar in performance to non-tracking \\{ETCs\\} with an average power output of 89W (776kWh/year) vs. 80W (701kWh/year).

James Freeman; Klaus Hellgardt; Christos N. Markides

2015-01-01T23:59:59.000Z

318

Ocean acoustic noise budgets: Application to the environmental assessment of offshore wind power generation.  

Science Journals Connector (OSTI)

A noise budget is a listing of the various sources of acoustic noise and their associated ranking by importance. A number of different types of budgets can be conceived using various acoustic measures such as intensity energy or duration of maximum amplitude level. These budgets are typically parameterized by frequency and are usually computed over 1/3 octave bands. As part of the environmental assessment of the proposed offshore wind powergeneration project under the Rhode Island Special Area Management Plan (SAMP) noise measurements were made using the Passive Acoustic Listener (PAL) systems off the coast of Rhode Island prior to the installation of any wind power facilities. Two PALs were deployed within two miles of Block Island in water depths of 20 m from October 6 to November 11 2008. The data included noise spectra and source identification every 3 min. Short snapshots of unusual sounds were also recorded. From this data the ocean acoustic noise budget is computed with contributions from shipping wind/waves marine mammals and rain from 500 Hz to 50 kHz. The shipnoise data is correlated with ship traffic data from the Automatic Identification System (AIS). [Funding provided by the Rhode Island Office of Energy Resources.

2009-01-01T23:59:59.000Z

319

Assessment of the use of extended burnup fuel in light water power reactors  

SciTech Connect

This study has been conducted by Pacific Northwest Laboratory for the US Nuclear Regulatory Commission to review the environmental and economic impacts associated with the use of extended burnup nuclear fuel in light water power reactors. It has been proposed that current batch average burnup levels of 33 GWd/t uranium be increased to above 50 GWd/t. The environmental effects of extending fuel burnup during normal operations and during accident events and the economic effects of cost changes on the fuel cycle are discussed in this report. The physical effects of extended burnup on the fuel and the fuel assembly are also presented as a basis for the environmental and economic assessments. Environmentally, this burnup increase would have no significant impact over that of normal burnup. Economically, the increased burnup would have favorable effects, consisting primarily of a reduction: (1) total fuel requirements; (2) reactor downtime for fuel replacement; (3) the number of fuel shipments to and from reactor sites; and (4) repository storage requirements. 61 refs., 4 figs., 27 tabs.

Baker, D.A.; Bailey, W.J.; Beyer, C.E.; Bold, F.C.; Tawil, J.J.

1988-02-01T23:59:59.000Z

320

CCS, Nuclear Power and Biomass An Assessment of Option Triangle under Global Warming Mitigation Policy by an Integrated Assessment Model MARIA-23  

Science Journals Connector (OSTI)

Abstract It is well understood that the global climate change caused by the increase of greenhouse gas (GHG) emission would be a serious barrier towards the sustainable development. Nuclear power, CCS and biomass have been regarded as the major options in the GHG mitigation policy. However, since the social acceptance of nuclear power expansion has seriously been changed after the gigantic earthquake on March 11, 2011 followed by the Fukushima Daiichi nuclear power station accident, the energy policy makers are forced to consider both the global warming and the decline of nuclear power simultaneously. This study attempts to address the following key questions: (1) how much additional costs or decline of production will be needed when nuclear power expansion is limited under the GHG emission control policies and (2) to what extent the potential of the biomass and CCS could compensate for the nuclear power reductions. We expand an integrated assessment model, MARIA-23 (Multiregional Approach for Resource and Industry Allocation) to deal with the CCS options and biomass options taking into account the additional carbon emission by cultivation. The simulation results show the interrelationships of the carbon mitigation contributions of the above three major options under various scenarios.

Shunsuke Mori; Keisuke Miyaji; Kazuhisa Kamegai

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Assessment of the fire resistance of a nuclear power plant subjected to a large commercial aircraft crash  

Science Journals Connector (OSTI)

The safety assessment of infrastructures, such as a nuclear power plant, for the crash of a large commercial aircraft has been performed worldwide after the terrorism that occurred in the U.S. on September 11, 2001. The assessment, however, has mainly focused on the techniques of impact analysis. In this study, a systematic procedure to assess the fire resistance of containment and auxiliary buildings subjected to such an aircraft crash is proposed. The intensity, duration and distribution of the fire are determined based on aircraft crash analyses and characteristics of jet fuel. A three-dimensional detailed finite element model of the containment and auxiliary buildings is established and used for heat transfer and thermal stress analyses, taking into account the material properties at an elevated temperature. Section forces can then be obtained that are based on a nonlinear stressstrain relationship. The fire resistance of the structure is assessed by comparing the fire-induced section forces with the section resistance which is evaluated using the loadmoment strength interaction diagram. The study addresses the problem whereby the conventional assessment that only considers the flexural behaviour is less accurate. The assessment results support the general conclusion that the nuclear power plant structures can maintain structural integrity against external fire due to their relatively thick sections. The proposed procedure can be extensively applied to evaluate the fire endurance time of any type of structure subjected to an arbitrary fire.

Se-Jin Jeon; Byeong-Moo Jin; Young-Jin Kim

2012-01-01T23:59:59.000Z

322

Sustainability Assessment of Coal-Fired Power Plants with Carbon Capture and Storage  

SciTech Connect

Carbon capture and sequestration (CCS) has the ability to dramatically reduce carbon dioxide (CO2) emissions from power production. Most studies find the potential for 70 to 80 percent reductions in CO2 emissions on a life-cycle basis, depending on the technology. Because of this potential, utilities and policymakers are considering the wide-spread implementation of CCS technology on new and existing coal plants to dramatically curb greenhouse gas (GHG) emissions from the power generation sector. However, the implementation of CCS systems will have many other social, economic, and environmental impacts beyond curbing GHG emissions that must be considered to achieve sustainable energy generation. For example, emissions of nitrogen oxides (NOx), sulfur oxides (SOx), and particulate matter (PM) are also important environmental concerns for coal-fired power plants. For example, several studies have shown that eutrophication is expected to double and acidification would increase due to increases in NOx emissions for a coal plant with CCS provided by monoethanolamine (MEA) scrubbing. Potential for human health risks is also expected to increase due to increased heavy metals in water from increased coal mining and MEA hazardous waste, although there is currently not enough information to relate this potential to actual realized health impacts. In addition to environmental and human health impacts, supply chain impacts and other social, economic, or strategic impacts will be important to consider. A thorough review of the literature for life-cycle analyses of power generation processes using CCS technology via the MEA absorption process, and other energy generation technologies as applicable, yielded large variability in methods and core metrics. Nonetheless, a few key areas of impact for CCS were developed from the studies that we reviewed. These are: the impact of MEA generation on increased eutrophication and acidification from ammonia emissions and increased toxicity from MEA production and the impact of increased coal use including the increased generation of NOx from combustion and transportation, impacts of increased mining of coal and limestone, and the disposal of toxic fly ash and boiler ash waste streams. Overall, the implementing CCS technology could contribute to a dramatic decrease in global GHG emissions, while most other environmental and human health impact categories increase only slightly on a global scale. However, the impacts on human toxicity and ecotoxicity have not been studied as extensively and could have more severe impacts on a regional or local scale. More research is needed to draw strong conclusions with respect to the specific relative impact of different CCS technologies. Specifically, a more robust data set that disaggregates data in terms of component processes and treats a more comprehensive set of environmental impacts categories from a life-cycle perspective is needed. In addition, the current LCA framework lacks the required temporal and spatial scales to determine the risk of environmental impact from carbon sequestration. Appropriate factors to use when assessing the risk of water acidification (groundwater/oceans/aquifers depending on sequestration site), risk of increased human toxicity impact from large accidental releases from pipeline or wells, and the legal and public policy risk associated with licensing CO2 sequestration sites are also not currently addressed. In addition to identifying potential environmental, social, or risk-related issues that could impede the large-scale deployment of CCS, performing LCA-based studies on energy generation technologies can suggest places to focus our efforts to achieve technically feasible, economically viable, and environmentally conscious energy generation technologies for maximum impact.

Widder, Sarah H.; Butner, R. Scott; Elliott, Michael L.; Freeman, Charles J.

2011-11-30T23:59:59.000Z

323

Wind power plants and the conservation of birds and bats in Spain: a geographical assessment  

Science Journals Connector (OSTI)

The number of wind power plants installed in Spain has increased dramatically, and ... . This paper explores the geographical overlap of wind power plants with the ranges of flying vertebrate species. ... 10נ10...

Jos Luis Tellera

2009-06-01T23:59:59.000Z

324

Models for Assessing Power Fluctuations from Large Wind Farms N. A. Cutululis1)  

E-Print Network (OSTI)

typical and worst case power fluctuations using the geographical sitting of wind turbines as an input comprehensive, with one year of wind speeds and power from all individual wind turbines in the wind farms of the fluctuating nature of wind speeds, the increasing use of wind turbines for power generation has caused more

325

ASSESSMENT OF LOW COST NOVEL SORBENTS FOR COAL-FIRED POWER PLANT MERCURY CONTROL  

SciTech Connect

The injection of sorbents upstream of a particulate control device is one of the most promising methods for controlling mercury emissions from coal-fired utility boilers with electrostatic precipitators and fabric filters. Studies carried out at the bench-, pilot-, and full-scale have shown that a wide variety of factors may influence sorbent mercury removal effectiveness. These factors include mercury species, flue gas composition, process conditions, existing pollution control equipment design, and sorbent characteristics. The objective of the program is to obtain the necessary information to assess the viability of lower cost alternatives to commercially available activated carbon for mercury control in coal-fired utilities. Prior to injection testing, a number of sorbents were tested in a slipstream fixed-bed device both in the laboratory and at two field sites. Based upon the performance of the sorbents in a fixed-bed device and the estimated cost of mercury control using each sorbent, seventeen sorbents were chosen for screening in a slipstream injection system at a site burning a Western bituminous coal/petcoke blend, five were chosen for screening at a site burning a subbituminous Powder River Basin (PRB) coal, and nineteen sorbents were evaluated at a third site burning a PRB coal. Sorbents evaluated during the program were of various materials, including: activated carbons, treated carbons, other non-activated carbons, and non-carbon material. The economics and performance of the novel sorbents evaluated demonstrate that there are alternatives to the commercial standard. Smaller enterprises may have the opportunity to provide lower price mercury sorbents to power generation customers under the right set of circumstances.

Sharon Sjostrom

2004-03-01T23:59:59.000Z

326

Environmental assessment of a membrane-based air separation for a coal-fired oxyfuel power plant  

Science Journals Connector (OSTI)

Abstract CO2 reduction from fossil-fired power plants can be achieved by carbon dioxide capture and storage (CCS). Among different CO2 capture technologies for power plants the oxyfuel power plant concept is a promising option. High temperature ceramic membranes for oxygen production have the potential to reduce the associated efficiency losses significantly compared to conventional air separation using cryogenic techniques. Focus of this paper is the environmental performance of membrane-based oxygen production for oxyfuel power plant technology. Included into the analysis are the production of the perovskite membrane (BSCF=Ba0.5Sr0.5Co0.8Fe0.2O3??), the incorporation into a steel module, and the integration of several modules into an oxyfuel power plant. The membrane-based oxygen production is compared to the conventional cryogenic air separation in oxyfuel power plants in an ecological way. The evaluation is performed using life cycle assessment (LCA) methodology from cradle to grave. The share in the overall environmental impacts of respective life cycle elements like membrane and module production but also coal supply processes as well as the operation of the oxyfuel power plant are identified. Sensitivity analyses referring to life-time, permeability and housing conditions of the membranes set benchmarks for further membrane development.

Andrea Schreiber; Josefine Marx; Petra Zapp

2013-01-01T23:59:59.000Z

327

DOE/EA-1247; Environmental Assessment for Electrical Power System Upgrades at Los Alamos National Laboratory (03/09/00)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

47 47 Environmental Assessment for Electrical Power System Upgrades at Los Alamos National Laboratory Los Alamos, New Mexico Final Document Date Prepared: March 9, 2000 Prepared by: U.S. Department of Energy, Los Alamos Area Office Final EA Electrical Power System Upgrades EA March 9, 2000 DOE/LAAO iii CONTENTS ACRONYMS AND TERMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii EXECUTIVE SUMMARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi 1.0 PURPOSE AND NEED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1.1 Role of Cooperating Agencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Background . . . . . . .

328

Powertrain Assessment  

NLE Websites -- All DOE Office Websites (Extended Search)

Powertrain Powertrain Systems Analysis Toolkit (PSAT) is used to design and evaluate a series of plug-in hybrid electric vehicles (PHEVs) with various "primary electric" ranges, considering all-electric and charge-depleting strategies. The objective is to quantify the impact of all-electric range on component performance requirements. The concern is that the peak power requirements for the battery and electric drive are much higher to achieve the same performance in electric and hybrid modes. This impacts the vehicle economics; higher energy and power requirements drive up costs of the battery and electric drive components, reducing the likelihood of production. One of the main objectives of the U.S. Department of Energy's Plug-in Hybrid Electric Vehicle R&D Plan is to "determine

329

Renewable Energy and Energy Efficiency Toolkit Website | Open Energy  

Open Energy Info (EERE)

Renewable Energy and Energy Efficiency Toolkit Website Renewable Energy and Energy Efficiency Toolkit Website Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy and Energy Efficiency Toolkit Website Focus Area: Renewable Energy Topics: Policy Impacts Website: toolkits.reeep.org/ Equivalent URI: cleanenergysolutions.org/content/renewable-energy-and-energy-efficienc Language: "English,Chinese,French,Portuguese,Spanish" is not in the list of possible values (Abkhazian, Achinese, Acoli, Adangme, Adyghe; Adygei, Afar, Afrihili, Afrikaans, Afro-Asiatic languages, Ainu, Akan, Akkadian, Albanian, Aleut, Algonquian languages, Altaic languages, Amharic, Angika, Apache languages, Arabic, Aragonese, Arapaho, Arawak, Armenian, Aromanian; Arumanian; Macedo-Romanian, Artificial languages, Assamese, Asturian; Bable; Leonese; Asturleonese, Athapascan languages, Australian languages, Austronesian languages, Avaric, Avestan, Awadhi, Aymara, Azerbaijani, Balinese, Baltic languages, Baluchi, Bambara, Bamileke languages, Banda languages, Bantu (Other), Basa, Bashkir, Basque, Batak languages, Beja; Bedawiyet, Belarusian, Bemba, Bengali, Berber languages, Bhojpuri, Bihari languages, Bikol, Bini; Edo, Bislama, Blin; Bilin, Blissymbols; Blissymbolics; Bliss, Bosnian, Braj, Breton, Buginese, Bulgarian, Buriat, Burmese, Caddo, Catalan; Valencian, Caucasian languages, Cebuano, Celtic languages, Central American Indian languages, Central Khmer, Chagatai, Chamic languages, Chamorro, Chechen, Cherokee, Cheyenne, Chibcha, Chichewa; Chewa; Nyanja, Chinese, Chinook jargon, Chipewyan; Dene Suline, Choctaw, Chuukese, Chuvash, Classical Newari; Old Newari; Classical Nepal Bhasa, Classical Syriac, Coptic, Cornish, Corsican, Cree, Creek, Creoles and pidgins , Crimean Tatar; Crimean Turkish, Croatian, Cushitic languages, Czech, Dakota, Danish, Dargwa, Delaware, Dinka, Divehi; Dhivehi; Maldivian, Dogri, Dogrib, Dravidian languages, Duala, Dutch; Flemish, Dyula, Dzongkha, Eastern Frisian, Efik, Egyptian (Ancient), Ekajuk, Elamite, English, Erzya, Esperanto, Estonian, Ewe, Ewondo, Fang, Fanti, Faroese, Fijian, Filipino; Pilipino, Finnish, Finno-Ugrian languages, Fon, French, Friulian, Fulah, Ga, Gaelic; Scottish Gaelic, Galibi Carib, Galician, Ganda, Gayo, Gbaya, Geez, Georgian, German, Germanic languages, Gilbertese, Gondi, Gorontalo, Gothic, Grebo, Greek, Modern, Guarani, Gujarati, Gwich'in, Haida, Haitian; Haitian Creole, Hausa, Hawaiian, Hebrew, Herero, Hiligaynon, Himachali languages; Western Pahari languages, Hindi, Hiri Motu, Hittite, Hmong; Mong, Hungarian, Hupa, Iban, Icelandic, Ido, Igbo, Ijo languages, Iloko, Inari Sami, Indic languages, Indo-European languages, Indonesian, Ingush, Interlingue; Occidental, Inuktitut, Inupiaq, Iranian languages, Irish, Iroquoian languages, Italian, Japanese, Javanese, Judeo-Arabic, Judeo-Persian, Kabardian, Kabyle, Kachin; Jingpho, Kalaallisut; Greenlandic, Kalmyk; Oirat, Kamba, Kannada, Kanuri, Kara-Kalpak, Karachay-Balkar, Karelian, Karen languages, Kashmiri, Kashubian, Kawi, Kazakh, Khasi, Khoisan languages, Khotanese; Sakan, Kikuyu; Gikuyu, Kimbundu, Kinyarwanda, Kirghiz; Kyrgyz, Klingon; tlhIngan-Hol, Komi, Kongo, Konkani, Korean, Kosraean, Kpelle, Kru languages, Kuanyama; Kwanyama, Kumyk, Kurdish, Kurukh, Kutenai, Ladino, Lahnda, Lamba, Land Dayak languages, Lao, Latin, Latvian, Lezghian, Limburgan; Limburger; Limburgish, Lingala, Lithuanian, Lojban, Lower Sorbian, Lozi, Luba-Katanga, Luba-Lulua, Luiseno, Lule Sami, Lunda, Luo (Kenya and Tanzania), Lushai, Luxembourgish; Letzeburgesch, Macedonian, Madurese, Magahi, Maithili, Makasar, Malagasy, Malay, Malayalam, Maltese, Manchu, Mandar, Mandingo, Manipuri, Manobo languages, Manx, Maori, Mapudungun; Mapuche, Marathi, Mari, Marshallese, Marwari, Masai, Mayan languages, Mende, Mi'kmaq; Micmac, Minangkabau, Mirandese, Mohawk, Moksha, Mon-Khmer languages, Mongo, Mongolian, Mossi, Multiple languages, Munda languages, N'Ko, Nahuatl languages, Nauru, Navajo; Navaho, Ndebele, North; North Ndebele, Ndebele, South; South Ndebele, Ndonga, Neapolitan, Nepal Bhasa; Newari, Nepali, Nias, Niger-Kordofanian languages, Nilo-Saharan languages, Niuean, North American Indian languages, Northern Frisian, Northern Sami, Norwegian, Nubian languages, Nyamwezi, Nyankole, Nyoro, Nzima, Occitan (post 1500); Provençal, Ojibwa, Oriya, Oromo, Osage, Ossetian; Ossetic, Otomian languages, Pahlavi, Palauan, Pali, Pampanga; Kapampangan, Pangasinan, Panjabi; Punjabi, Papiamento, Papuan languages, Pedi; Sepedi; Northern Sotho, Persian, Philippine languages, Phoenician, Pohnpeian, Polish, Portuguese, Prakrit languages, Pushto; Pashto, Quechua, Rajasthani, Rapanui, Rarotongan; Cook Islands Maori, Romance languages, Romanian; Moldavian; Moldovan, Romansh, Romany, Rundi, Russian, Salishan languages, Samaritan Aramaic, Sami languages, Samoan, Sandawe, Sango, Sanskrit, Santali, Sardinian, Sasak, Scots, Selkup, Semitic languages, Serbian, Serer, Shan, Shona, Sichuan Yi; Nuosu, Sicilian, Sidamo, Sign Languages, Siksika, Sindhi, Sinhala; Sinhalese, Sino-Tibetan languages, Siouan languages, Skolt Sami, Slave (Athapascan), Slavic languages, Slovak, Slovenian, Sogdian, Somali, Songhai languages, Soninke, Sorbian languages, Sotho, Southern, South American Indian (Other), Southern Altai, Southern Sami, Spanish; Castilian, Sranan Tongo, Sukuma, Sumerian, Sundanese, Susu, Swahili, Swati, Swedish, Swiss German; Alemannic; Alsatian, Syriac, Tagalog, Tahitian, Tai languages, Tajik, Tamashek, Tamil, Tatar, Telugu, Tereno, Tetum, Thai, Tibetan, Tigre, Tigrinya, Timne, Tiv, Tlingit, Tok Pisin, Tokelau, Tonga (Nyasa), Tonga (Tonga Islands), Tsimshian, Tsonga, Tswana, Tumbuka, Tupi languages, Turkish, Turkmen, Tuvalu, Tuvinian, Twi, Udmurt, Ugaritic, Uighur; Uyghur, Ukrainian, Umbundu, Uncoded languages, Undetermined, Upper Sorbian, Urdu, Uzbek, Vai, Venda, Vietnamese, Volapük, Votic, Wakashan languages, Walamo, Walloon, Waray, Washo, Welsh, Western Frisian, Wolof, Xhosa, Yakut, Yao, Yapese, Yiddish, Yoruba, Yupik languages, Zande languages, Zapotec, Zaza; Dimili; Dimli; Kirdki; Kirmanjki; Zazaki, Zenaga, Zhuang; Chuang, Zulu, Zuni) for this property.

330

Using the Model Coupling Toolkit to couple earth system models  

Science Journals Connector (OSTI)

Continued advances in computational resources are providing the opportunity to operate more sophisticated numerical models. Additionally, there is an increasing demand for multidisciplinary studies that include interactions between different physical processes. Therefore there is a strong desire to develop coupled modeling systems that utilize existing models and allow efficient data exchange and model control. The basic system would entail model 1 running on M processors and model 2 running on N processors, with efficient exchange of model fields at predetermined synchronization intervals. Here we demonstrate two coupled systems: the coupling of the ocean circulation model Regional Ocean Modeling System (ROMS) to the surface wave model Simulating \\{WAves\\} Nearshore (SWAN), and the coupling of ROMS to the atmospheric model Coupled Ocean Atmosphere Prediction System (COAMPS). Both coupled systems use the Model Coupling Toolkit (MCT) as a mechanism for operation control and inter-model distributed memory transfer of model variables. In this paper we describe requirements and other options for model coupling, explain the MCT library, ROMS, SWAN and COAMPS models, methods for grid decomposition and sparse matrix interpolation, and provide an example from each coupled system. Methods presented in this paper are clearly applicable for coupling of other types of models.

John C. Warner; Natalie Perlin; Eric D. Skyllingstad

2008-01-01T23:59:59.000Z

331

DOE/EA-1689: Environmental Assessment PrairieWinds - ND 1 Basin Electric Power Cooperative (June 2009)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PrairieWinds - ND 1 Basin Electric Power Cooperative Prepared for: Rural Utilities Service Prepared by: Tetra Tech 4900 Pearl East Circle, Suite 300W Boulder, CO 80301 June 2009 Environmental Assessment PrairieWinds - ND 1 Tetra Tech June 2009 i Table of Contents EXECUTIVE SUMMARY ....................................................................................................................1 1.0 PURPOSE AND NEED FOR PROPOSED ACTION ..............................................................1 1.1 Purpose and Need ...........................................................................................................1

332

NWCC Guidelines for Assessing the Economic Development Impacts of Wind Power  

SciTech Connect

OAK-B135 The primary objective of this study is to provide examples of thorough and consistent analysis and documentation of economic impacts from wind power development.

Michael Taylor, Northwest Economic Associates Alan Fox, Northwest Economic Associates Jill Chilton, Northwest Economic Associates NWCC Economic Development Work Group Contributors Steve Clemmer, Lisa Daniels, Ed DeMeo, Rick Halet, Ron Lehr, Michael Milligan Vince Robinson

2002-02-12T23:59:59.000Z

333

Capturing and Sequestering CO2 from a Coal-Fired Power Plant - Assessing the Net Energy and Greenhouse Gas Emissions  

NLE Websites -- All DOE Office Websites (Extended Search)

Capturing and Sequestering CO Capturing and Sequestering CO 2 from a Coal-fired Power Plant - Assessing the Net Energy and Greenhouse Gas Emissions Pamela L. Spath (pamela_spath @nrel.gov; (303) 275-4460) Margaret K. Mann (margaret_mann @nrel.gov; (303) 275-2921) National Renewable Energy Laboratory 1617 Cole Boulevard Golden, CO 80401 INTRODUCTION It is technically feasible to capture CO 2 from the flue gas of a coal-fired power plant and various researchers are working to understand the fate of sequestered CO 2 and its long term environmental effects. Sequestering CO 2 significantly reduces the CO 2 emissions from the power plant itself, but this is not the total picture. CO 2 capture and sequestration consumes additional energy, thus lowering the plant's fuel to electricity efficiency. To compensate for this, more fossil fuel must be

334

LWR Sustainability: Assessment of Aging of Nuclear Power Plant Safety Related Concrete Strutures  

SciTech Connect

Current regulatory testing and inspection requirements are reviewed and a summary of degradation experience is presented. Techniques commonly used to inspect NPP concrete structures to assess and quantify age-related degradation are summarized. An approach for conduct of condition assessments of structures in NPPs is presented. Criteria, based primarily on visual indications, are provided for use in classification and assessment of concrete degradation. Materials and techniques for repair of degraded structures are generally discussed.

Graves III, Herman [U.S. Nuclear Regulatory Commission; Naus, Dan J [ORNL

2013-01-01T23:59:59.000Z

335

A Public Toolkit and ITS Dataset for EEG Yueran Yuan, Kai-min Chang, Yanbo Xu, Jack Mostow  

E-Print Network (OSTI)

A Public Toolkit and ITS Dataset for EEG Yueran Yuan, Kai-min Chang, Yanbo Xu, Jack Mostow Language a classifier to estimate a student's amount of prior exposure to a given word. We make this dataset and toolkit setting. In this paper, we present a dataset from 3 years of school usage of Project LISTEN's Reading

336

Cascading Dynamics and Mitigation Assessment in Power System Disturbances via a Hidden Failure Model  

E-Print Network (OSTI)

and control strategy. The sensitivity of power-law behavior with respect to each of these parameters; Protective Relaying hidden failures; Blackout mitigation Introduction An overriding factor in power system] in spite of technological progress and huge investments on the system reliability and security. Although

337

Cascading dynamics and mitigation assessment in power system disturbances via a hidden failure model  

E-Print Network (OSTI)

and the IEEE 118-bus test system. It is our intention that this study can provide guidance on when and how system reliability; Protective relaying hidden failures; Blackout mitigation 1. Introduction and their impact on power transmission system reliability have been examined in several recent Electrical Power

Dobson, Ian

338

A life cycle co-benefits assessment of wind power in China  

Science Journals Connector (OSTI)

Abstract Wind power can help ensure regional energy security and also mitigate both global greenhouse gas and local air pollutant emissions, leading to co-benefits. With rapid installation of wind power equipment, it is critical to uncover the embodied emissions of greenhouse gas and air pollutants from wind power sector so that emission mitigation costs can be compared with a typical coal-fired power plant. In order to reach such a target, we conduct a life cycle analysis for wind power sector by using the Chinese inventory standards. Wind farms only release 1/40 of the total CO2 emissions that would be produced by the coal power system for the same amount of power generation, which is equal to 97.48% of CO2 emissions reduction. Comparing with coal power system, wind farms can also significantly reduce air pollutants (SO2, NOX and PM10), leading to 80.38%, 57.31% and 30.91% of SO2, NOX and PM10 emissions reduction, respectively. By considering both recycling and disposal, wind power system could reduce 2.74104t of CO2 emissions, 5.65104kg of NOX emissions, 2.95105kg of SO2 emissions and 7.97104kg of PM10 emissions throughout its life cycle. In terms of mitigation cost, a wind farm could benefit 37.14 US$ from mitigating 1ton of CO2 emissions. The mitigation cost rates of air pollutants were 7.94 US$/kg of SO2, 10.79 US$/kg of NOx, and 80.79 US$/kg of PM10.Our research results strongly support the development of wind power so that more environmental benefits can be gained. However, decentralized wind power developers should consider not only project locations close to the demand of electricity and wind resources, but also the convenient transportation for construction and recycling, while centralized wind power developers should focus on incorporating wind power into the grids in order to avoid wind power loss.

Bing Xue; Zhixiao Ma; Yong Geng; Peter Heck; Wanxia Ren; Mario Tobias; Achim Maas; Ping Jiang; Jose A. Puppim de Oliveira; Tsuyoshi Fujita

2015-01-01T23:59:59.000Z

339

LEDSGP/Transportation Toolkit/Key Actions/Create a Baseline | Open Energy  

Open Energy Info (EERE)

LEDSGP/Transportation Toolkit/Key Actions/Create a Baseline LEDSGP/Transportation Toolkit/Key Actions/Create a Baseline < LEDSGP‎ | Transportation Toolkit‎ | Key Actions Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low-emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a way that complements existing climate and development goals in other sectors. Planners, researchers, and decision-makers should customize this LEDS implementation framework for the specific conditions of their transport

340

LEDSGP/Transportation Toolkit/Key Actions/Evaluate the System | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Key Actions/Evaluate the System < LEDSGP‎ | Transportation Toolkit‎ | Key Actions(Redirected from Transportation Toolkit/Key Actions/Evaluate the System) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low-emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

LEDSGP/Transportation Toolkit/Key Actions/Create a Baseline | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Key Actions/Create a Baseline < LEDSGP‎ | Transportation Toolkit‎ | Key Actions(Redirected from Transportation Toolkit/Key Actions/Create a Baseline) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a

342

LEDSGP/Transportation Toolkit/Key Actions/Prioritize and Plan | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Key Actions/Prioritize and Plan < LEDSGP‎ | Transportation Toolkit‎ | Key Actions(Redirected from Transportation Toolkit/Key Actions/Prioritize and Plan) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low-emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a

343

AutoMicromanager: A microscopy scripting toolkit for LABVIEW and other programming environments  

Science Journals Connector (OSTI)

We present a scripting toolkit for the acquisition and analysis of a wide variety of imaging data by integrating the ease of use of various programming environments such as LABVIEW IGOR PRO MATLAB SCILAB and others. This toolkit is designed to allow the user to quickly program a variety of standard microscopy components for custom microscopy applications allowing much more flexibility than other packages. Included are both programming tools as well as graphical user interface classes allowing a standard consistent and easy to maintain scripting environment. This programming toolkit allows easy access to most commonly used cameras stages and shutters through the Micromanager project so the scripter can focus on their custom application instead of boilerplate code generation.

Brian Alan Ashcroft; Tjerk Oosterkamp

2010-01-01T23:59:59.000Z

344

LEDSGP/Transportation Toolkit/Key Actions/Implement and Monitor | Open  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Key Actions/Implement and Monitor < LEDSGP‎ | Transportation Toolkit‎ | Key Actions(Redirected from Transportation Toolkit/Key Actions/Implement and Monitor) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low-emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a

345

Water Security Toolkit User Manual Version 1.2.  

SciTech Connect

The Water Security Toolkit (WST) is a suite of open source software tools that can be used by water utilities to create response strategies to reduce the impact of contamination in a water distribution network . WST includes hydraulic and water quality modeling software , optimizati on methodologies , and visualization tools to identify: (1) sensor locations to detect contamination, (2) locations in the network in which the contamination was introduced, (3) hydrants to remove contaminated water from the distribution system, (4) locations in the network to inject decontamination agents to inactivate, remove, or destroy contaminants, (5) locations in the network to take grab sample s to help identify the source of contamination and (6) valves to close in order to isolate contaminate d areas of the network. This user manual describes the different components of WST , along w ith examples and case studies. License Notice The Water Security Toolkit (WST) v.1.2 Copyright c 2012 Sandia Corporation. Under the terms of Contract DE-AC04-94AL85000, there is a non-exclusive license for use of this work by or on behalf of the U.S. government. This software is distributed under the Revised BSD License (see below). In addition, WST leverages a variety of third-party software packages, which have separate licensing policies: Acro Revised BSD License argparse Python Software Foundation License Boost Boost Software License Coopr Revised BSD License Coverage BSD License Distribute Python Software Foundation License / Zope Public License EPANET Public Domain EPANET-ERD Revised BSD License EPANET-MSX GNU Lesser General Public License (LGPL) v.3 gcovr Revised BSD License GRASP AT&T Commercial License for noncommercial use; includes randomsample and sideconstraints executable files LZMA SDK Public Domain nose GNU Lesser General Public License (LGPL) v.2.1 ordereddict MIT License pip MIT License PLY BSD License PyEPANET Revised BSD License Pyro MIT License PyUtilib Revised BSD License PyYAML MIT License runpy2 Python Software Foundation License setuptools Python Software Foundation License / Zope Public License six MIT License TinyXML zlib License unittest2 BSD License Utilib Revised BSD License virtualenv MIT License Vol Common Public License vpykit Revised BSD License Additionally, some precompiled WST binary distributions might bundle other third-party executables files: Coliny Revised BSD License (part of Acro project) Dakota GNU Lesser General Public License (LGPL) v.2.1 PICO Revised BSD License (part of Acro project) i Revised BSD License Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Sandia National Laboratories nor Sandia Corporation nor the names of its con- tributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS %22AS IS%22 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IM- PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUD- ING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ii Acknowledgements This work was supported by the U.S. Environmental Protection Agen

Klise, Katherine A.; Siirola, John Daniel; Hart, David; Hart, William E.; Phillips, Cynthia A.; Haxton, Terranna; Murray, Regan; Janke, Robert; Taxon, Thomas; Laird, Carl; Seth, Arpan; Hackebeil, Gabriel; McGee, Shawn; Mann, Angelica

2014-08-01T23:59:59.000Z

346

Tsunami Assessment for Risk Management at Nuclear Power Facilities in Japan  

Science Journals Connector (OSTI)

The present study focuses on evaluation of the maximum and minimum water levels caused by tsunamis as risk factors for operation and management at nuclear power facilities along the coastal area of Japan. Tsunami...

Ken Yanagisawa; Fumihiko Imamura

2007-01-01T23:59:59.000Z

347

Tsunami Assessment for Risk Management at Nuclear Power Facilities in Japan  

Science Journals Connector (OSTI)

The present study focuses on evaluation of the maximum and minimum water levels caused by tsunamis as risk factors for operation and management at nuclear power facilities along the coastal area of Japan. Tsunami...

Ken Yanagisawa; Fumihiko Imamura; Tsutomu Sakakiyama

2007-03-01T23:59:59.000Z

348

Safety culture in the nuclear power industry : attributes for regulatory assessment  

E-Print Network (OSTI)

Safety culture refers to the attitudes, behaviors, and conditions that affect safety performance and often arises in discussions following incidents at nuclear power plants. As it involves both operational and management ...

Alexander, Erin L

2004-01-01T23:59:59.000Z

349

Assessment of Wind Power Potential for Two Contrasting Coastlines of South Africa Using a Numerical Model  

Science Journals Connector (OSTI)

A two-dimensional numerical model is used to predict near surface wind velocities, and consequently wind power, for five distinct synoptic regimes for contrasting east and west coasts of South Africa. The model results suggest that no one ...

R. D. Diab; M. Garstang

1984-12-01T23:59:59.000Z

350

Estimation of the reliability of space nuclear power systems by probabilistic risk assessment techniques  

E-Print Network (OSTI)

Thermionic Reactor (SEHPTR). The present analysis focuses on the SNPS failure to produce nominal electrical power. Typical events threatening the reliability of the SNPS will consist of hardware failures, external events, and command errors or software...

Gutner, Sophie Isabelle

2012-06-07T23:59:59.000Z

351

Assessment of helical-cruciform fuel rods for high power density LWRs  

E-Print Network (OSTI)

In order to significantly increase the power density of Light Water Reactors (LWRs), the helical-cruciform (HC) fuel rod assembly has been proposed as an alternative to traditional fuel geometry. The HC assembly is a ...

Conboy, Thomas M

2010-01-01T23:59:59.000Z

352

Techno-economic assessment of pulverized coal boilers and IGCC power plants with CO2 capture  

Science Journals Connector (OSTI)

The current studies on power plant technologies suggest that Integrated Gasification Combined Cycle (IGCC) systems are an effective and economic CO2 capture technology pathway. In addition, the system in conventi...

Y. Huang; S. Rezvani; D. McIlveen-Wright

2010-06-01T23:59:59.000Z

353

Mid-short-term risk assessment of power systems considering impact of external environment  

Science Journals Connector (OSTI)

The case study using the real data of Jiangxi provincial power grid shows that ... of the entire system. Furthermore, ignoring the outage correlation of transmission lines in the disaster area would largely under...

Ning Zhang; Chongqing Kang; Jingkun Liu

2013-09-01T23:59:59.000Z

354

Numerical assessment of liquid cooling system for power electronics in fuel cell electric vehicles  

Science Journals Connector (OSTI)

Abstract Electrical power from the fuel cells is converted and controlled by power electronics that are composed of control units, converters and switching devices. During the power management, the inevitable power losses induce heat generation in the power electronics. In this, effective design for the cooling system is essential in terms of safety, reliability, and durability. A liquid cooling system for the power electronics is applied to chill the electrical components below the thermal specifications. Nonetheless, the layout of cooling components is usually designed after the completion of the chassis and power electronics in the automotive applications, thus, only a little freedom is allowed to change the layout. Thus, it is significant and urgent to investigate the cooling performance before finalizing the layout design. In this paper, one dimensional and computerized fluid dynamics code is employed to simulate the performance of the cooling system at the early stage of conceptual design. Three different layouts of cooling systems are chosen to compare the ensuing systematic cooling performances. The liquid flow rates, pressure drops, and maximum temperatures are computed by the numerical simulations of the cooling system which comprises the cold plates, liquid pump, radiator, and plumbing network. It is demonstrated that for a fuel cell electric vehicle of 100kW, the dual cooling loops with a specified array control the maximum temperatures below thermal specification by inducing the higher liquid flow rate of rate of 33.4L/min through radiator than 20.0L/min in a single loop. The proposed systematic numerical simulation provides significant information to determine the layout of the power electronics coupled with the cooling performance at the early stage of conceptual design.

Heesung Park

2014-01-01T23:59:59.000Z

355

Energy Storage for Variable Renewable Energy Resource Integration - A Regional Assessment for the Northwest Power Pool (NWPP)  

SciTech Connect

This paper addresses the following key questions in the discussion on the integration of renewable energy resources in the Pacific Northwest power grid: a) what will be the future balancing requirement to accommodate a simulated expansion of wind energy resources from 3.3 GW in 2008 to 14.4 GW in 2019 in the Northwest Power Pool (NWPP), and b) what are the most cost effective technological solutions for meeting the balancing requirements in the Northwest Power Pool (NWPP). A life-cycle analysis was performed to assess the least-cost technology option for meeting the new balancing requirement. The technologies considered in this study include conventional turbines (CT), sodium sulfur (NaS) batteries, lithium ion (Li-ion) batteries, pumped hydro energy storage (PH), and demand response (DR). Hybrid concepts that combine 2 or more of the technologies above are also evaluated. This analysis was performed with collaboration by the Bonneville Power Administration and funded by the Energy Storage Systems Program of the U.S. Department of Energy.

Kintner-Meyer, Michael CW; Jin, Chunlian; Balducci, Patrick J.; Elizondo, Marcelo A.; Guo, Xinxin; Nguyen, Tony B.; Tuffner, Francis K.; Viswanathan, Vilayanur V.

2011-03-20T23:59:59.000Z

356

Assessment of the suitability of agricultural waste water for geothermal power plant cooling in the Imperial Valley. I. Water quality  

SciTech Connect

Evaluation of the quality of agricultural waste water is the first step in assessing the sitability of agricultural waste water for geothermal power plant cooling. In this study samples of agricultural waste water from the New and Alamo rivers located in the Imperial Valley of California are analyzed. Determinations of standard water quality parameters, solids content, and inorganic compositions of the solids are made. The results are compared with data on samples of irrigation water and steam condensate also obtained from sites in the Imperial Valley. The data are evaluated in relation to cooling tower operation, waste generation, and waste disposal.

Morris, W.F.; Rigdon, L.P.

1981-09-01T23:59:59.000Z

357

Natural Circulation in Water Cooled Nuclear Power Plants Phenomena, models, and methodology for system reliability assessments  

SciTech Connect

In recent years it has been recognized that the application of passive safety systems (i.e., those whose operation takes advantage of natural forces such as convection and gravity), can contribute to simplification and potentially to improved economics of new nuclear power plant designs. In 1991 the IAEA Conference on ''The Safety of Nuclear Power: Strategy for the Future'' noted that for new plants the use of passive safety features is a desirable method of achieving simplification and increasing the reliability of the performance of essential safety functions, and should be used wherever appropriate''.

Jose Reyes

2005-02-14T23:59:59.000Z

358

Microsoft PowerPoint - Real-Time Dynamic Brake Assessment poster.ppt [Compatibility Mode]  

NLE Websites -- All DOE Office Websites (Extended Search)

Dynamic Brake Assessment Dynamic Brake Assessment Purpose Conduct a proof-of-concept test to examine the feasibility of developing an on-board system to assess a vehicle's ability to stop based on typical low-pressure in-service braking events. Partnerships H.T. Hackney Company MGM Brakes Overview Funded through the Federal Motor Carrier Safety Administration's Vehicle and Roadside Operations Division Concept stemming from on the Department of Energy's Medium Truck Duty Cycle research as well as previous research conducted for the National Highway Transportation Safety Administration. Signals to be collected Real-time brake application pressure Vehicle speed and acceleration GPS location and grade information Vehicle weight (current load) Engine parameters such as RPM and torque To be conducted October 2010 -

359

An assessment of using oil shale for power production in the Hashemite Kingdom of Jordan  

SciTech Connect

This report addresses the oil shale-for-power-production option in Jordan. Under consideration are 20- and 50-MW demonstration units and a 400-MW, commercial-scale plant with, at the 400-MW scale, a mining operation capable of supplying 7.8 million tonnes per year of shale fuel and also capable of disposal of up to 6.1 million tonnes per year of wetted ash. The plant would be a direct combustion facility, burning crushed oil shale through use of circulating fluidized bed combustion technology. The report emphasizes four areas: (1) the need for power in Jordan, (2) environmental aspects of the proposed oil shale-for-power plant(s), (3) the engineering feasibility of using Jordan's oil shale in circulating fluidized bed combustion (CFBC) boiler, and (4) the economic feasibility of the proposed plant(s). A sensitivity study was conducted to determine the economic feasibility of the proposed plant(s) under different cost assumptions and revenue flows over the plant's lifetime. The sensitivity results are extended to include the major extra-firm benefits of the shale-for-power option: (1) foreign exchange savings from using domestic energy resources, (2) aggregate income effects of using Jordan's indigenous labor force, and (3) a higher level of energy security. 14 figs., 47 tabs.

Hill, L.J.; Holcomb, R.S.; Petrich, C.H.; Roop, R.D.

1990-11-01T23:59:59.000Z

360

1836 IEEE TRANSACTIONS ON POWER SYSTEMS, VOL. 23, NO. 4, NOVEMBER 2008 Vulnerability Assessment of Cybersecurity  

E-Print Network (OSTI)

of Cybersecurity for SCADA Systems Chee-Wooi Ten, Student Member, IEEE, Chen-Ching Liu, Fellow, IEEE's cybersecurity standards for electric power systems. The purpose is to study the impact of a cyber attack within the substation networks. Countermeasures are identified for improvement of the cybersecurity

Manimaran, Govindarasu

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Trait, state or artefact? Assessing experts' regulatory focus in nuclear power plant control  

Science Journals Connector (OSTI)

We apply the theory of regulatory focus in the field of nuclear power plant (NPP) control. The first pilot study was conducted at the German simulator centre for NPPs. Here, we tested the influence of accident training lessons on the experts' regulatory ... Keywords: Experts, Human factors, Nuclear, Regulatory focus, Self-report measures

Johannes Beck, Armin Eichinger, Klaus Bengler

2014-11-01T23:59:59.000Z

362

An assessment of crew exposures during nuclear-powered manned Mars missions  

E-Print Network (OSTI)

-of-life, full-power operation. This data is then used as the source terms for particle transport in MCNP. The total gamma and neutron fluxes exiting the reactor shields are recorded and separate transport calculations are then performed for a 10 g cm-2 crew...

Delisle, Christine Louise

2012-06-07T23:59:59.000Z

363

U. S. Army Measurement and Verification (M&V) Costing Toolkit  

E-Print Network (OSTI)

This is the 2003 final report for the U.S. Army Monitoring and Verification (M&V) costs project. The purpose of this project is to develop a M&V Costing Toolkit to be used by the government or third party planners to design a M&V plan...

Haberl, J. S.; Powell, T.; Carlson, K. A.; Im, P.; Turner, W. D.

2003-01-01T23:59:59.000Z

364

Metaprogrammable Toolkit for Model-Integrated Computing Akos Ledeczi, Miklos Maroti, Gabor Karsai and Greg Nordstrom  

E-Print Network (OSTI)

building, constraint management, and automatic program synthesis components, are well suited for the design. Model-Integrated Computing (MIC) is well suited for the rapid design and implementation of such systemsMetaprogrammable Toolkit for Model-Integrated Computing Akos Ledeczi, Miklos Maroti, Gabor Karsai

Maróti, Miklós

365

ProtEx: a toolkit for the analysis of distributed real-time systems  

E-Print Network (OSTI)

and queuing policies present in a system. In this thesis we present a methodology to extend the traditional RMA approach by allowing general characterization of workload and flexible modeling of resources. We realize our approaches within ProtEx, a toolkit...

Meylan, Yves Damien Meylan

2012-06-07T23:59:59.000Z

366

Waste Toolkit A-Z Food waste (recycling on-site)  

E-Print Network (OSTI)

Waste Toolkit A-Z Food waste (recycling on-site) How can I recycle food waste on-site? Recycling to be recycled. While this is better than sending waste to landfill, there is a more sustainable way to recycle and parks. See examples of Tidy Planet's customers recycling on-site: www.tidyplanet.co.uk/our-news Short

Melham, Tom

367

The Cloud Adoption Toolkit: Supporting Cloud Adoption Decisions in the Enterprise  

E-Print Network (OSTI)

1 The Cloud Adoption Toolkit: Supporting Cloud Adoption Decisions in the Enterprise Ali Khajeh-Hosseini, David Greenwood, James W. Smith, Ian Sommerville Cloud Computing Co-laboratory, School of Computer Science University of St Andrews, UK {akh, dsg22, jws7, ifs}@cs.st-andrews.ac.uk Abstract Cloud computing

Sommerville, Ian

368

Development of an Online Toolkit for Measuring Commercial Building Energy Efficiency Performance -- Scoping Study  

SciTech Connect

This study analyzes the market needs for building performance evaluation tools. It identifies the existing gaps and provides a roadmap for the U.S. Department of Energy (DOE) to develop a toolkit with which to optimize energy performance of a commercial building over its life cycle.

Wang, Na

2013-03-13T23:59:59.000Z

369

An Energy-Harvesting Sensor Architecture and Toolkit for Building Monitoring and Event Detection  

E-Print Network (OSTI)

An Energy-Harvesting Sensor Architecture and Toolkit for Building Monitoring and Event Detection of Michigan Ann Arbor, MI 48109 {bradjc,prabal}@umich.edu Abstract Understanding building usage patterns a new architecture for design- ing building-monitoring focused energy-harvesting sensors. The key

Dutta, Prabal

370

Hydrogen quantitative risk assessment workshop proceedings.  

SciTech Connect

The Quantitative Risk Assessment (QRA) Toolkit Introduction Workshop was held at Energetics on June 11-12. The workshop was co-hosted by Sandia National Laboratories (Sandia) and HySafe, the International Association for Hydrogen Safety. The objective of the workshop was twofold: (1) Present a hydrogen-specific methodology and toolkit (currently under development) for conducting QRA to support the development of codes and standards and safety assessments of hydrogen-fueled vehicles and fueling stations, and (2) Obtain feedback on the needs of early-stage users (hydrogen as well as potential leveraging for Compressed Natural Gas [CNG], and Liquefied Natural Gas [LNG]) and set priorities for %E2%80%9CVersion 1%E2%80%9D of the toolkit in the context of the commercial evolution of hydrogen fuel cell electric vehicles (FCEV). The workshop consisted of an introduction and three technical sessions: Risk Informed Development and Approach; CNG/LNG Applications; and Introduction of a Hydrogen Specific QRA Toolkit.

Groth, Katrina M.; Harris, Aaron P.

2013-09-01T23:59:59.000Z

371

Life cycle assessment of CO2 emissions from wind power plants: Methodology and case studies  

Science Journals Connector (OSTI)

Wind energy plays an increasingly important role in the worlds electricity market with rapid growth projected in the future. In order to evaluate the potential for wind energy to mitigate the effects of climate change by reducing CO2 intensity of the energy sector, this study developed a new direct and simple method for estimating CO2 emissions per kWh produced during the life cycle of four representative wind power plants (three in developed countries and one in China). The life cycle analysis focuses on the wind power plant as the basic functional object instead of a single wind turbine. Our results show that present-day wind power plants have a lifetime emission intensity of 5.08.2gCO2/kWh electricity, a range significantly lower than estimates in previous studies. Our estimate suggests that wind is currently the most desirable renewable energy in terms of minimizing CO2 emissions per kWh of produced electricity. The production phase contributes the most to overall CO2 emissions, while recycling after decommission could reduce emissions by nearly half, representing an advantage of wind when compared with other energy generation technologies such as nuclear. Compared with offshore wind plants, onshore plants have lower CO2 emissions per kWh electricity and require less transmission infrastructure. Analysis of a case in China indicates that a large amount of CO2 emissions could be saved in the transport phase in large countries by using shorter alternative routes of transportation. As the worlds fastest growing market for wind power, China could potentially save 780Mtons of CO2 emissions annually by 2030 with its revised wind development target. However, there is still ample room for even more rapid development of wind energy in China, accompanied by significant opportunities for reducing overall CO2 emissions.

Yuxuan Wang; Tianye Sun

2012-01-01T23:59:59.000Z

372

Preliminary assessment of rover power systems for the Mars Rover Sample Return Mission  

SciTech Connect

Four isotope power system concepts were presented and compared on a common basis for application to on-board electrical prime power for an autonomous planetary rover vehicle. A representative design point corresponding to the Mars Rover Sample Return (MRSR) preliminary mission requirements (500 W) was selected for comparison purposes. All systems concepts utilize the General Purpose Heat Source (GPHS) isotope heat source developed by DOE. Two of the concepts employ thermoelectric (TE) conversion: one using the GPHS Radioisotope Thermoelectric Generator (RTG) used as a reference case, the other using an advanced RTG with improved thermoelectric materials. The other two concepts employed are dynamic isotope power systems (DIPS): one using a closed Brayton cycle (CBC) turboalternator, and the other using a free piston Stirling cycle engine/linear alternator (FPSE) with integrated heat source/heater head. Near term technology levels have been assumed for concept characterization using component technology figure-of-merit values taken from the published literature. For example, the CBC characterization draws from the historical test database accumulated from space Brayton cycle subsystems and components from the NASA B engine through the mini-Brayton rotating unit. TE system performance is estimated from Voyager/multihundred Watt (MHW)-RTG flight experience through Mod-RTG performance estimates considering recent advances in TE materials under the DOD/DOE/NASA SP-100 and NASA Committee on Scientific and Technological Information programs. The Stirling DIPS system is characterized from scaled-down Space Power Demonstrator Engine (SPDE) data using the GPHS directly incorporated into the heater head.

Bents, D.J.

1989-01-01T23:59:59.000Z

373

Assessment of geothermal assisted coal-fired power generation using an Australian case study  

Science Journals Connector (OSTI)

Abstract A systematic techno-economic analysis of geothermal assisted power generation (GAPG) was performed for a 500MW unit of a typical coal-fired power plant located at the upper Hunter region of New South Wales, Australia. Specifically, the GAPG viability and performance was examined by investigating the impacts of reservoir temperature, resource distance, hybridisation scheme, and economic conditions including carbon tax and Renewable Energy Certificates (REC). The process simulation package, Aspen HYSYS, was employed for all simulation purposes. Thermodynamically, GAPG system was found to increase the power output of the plant by up to 19% under the booster mode whilst in fuel saving mode the coal consumption reduced by up to 0.3 million tonne/year decreasing the Green House Gas (GHG) emission by up to 15% (0.6 million tonne/year). Economic analyses showed that for a typical HDR resource with a reservoir temperature about 150C located within a 5km radius from the power plant, the GAPG system becomes economically competitive to the stand-alone fossil fuel based plant when minimum carbon tax and \\{RECs\\} rates of 40 $/tonne and 60 cents/kWh are introduced. The figure of merit analyses comparing GAPG system with both stand-alone fossil fuel and stand-alone geothermal plants showed that an economically feasible GAPG system requires the use of HDR resources located no further than 20km from the plants. Reference maps were also developed to predict suitable conditions for which the hybrid plant outperforms the stand-alone plants.

Cheng Zhou; Elham Doroodchi; Behdad Moghtaderi

2014-01-01T23:59:59.000Z

374

Assessing the Power Generation Solution by Thermal-chemical Conversion of Meat Processing Industry Waste  

Science Journals Connector (OSTI)

Abstract The paper presents a waste to energy conversion solution using a pyro-air-gasification process applied to biodegradable residues from meat processing industry integrated with small scale thermodynamic cycle for power generation. The solution of air- gasification at atmospheric pressure is based on experimental research and engineering computation developed during the study. The input data, such as: waste chemical composition, low/high heating value and proximate analysis, correspond to real waste products, sampled directly from the industrial processing line. Separate drying as first stage pre-treatment and integrated partial drying inside the reactor was used. The syngas low heating value of about 4.3MJ/Nm3 is insured by its combustible fraction (H2 12.2%, CO 19.2%, CH4 1.6%). According to syngas composition the thermodynamic cycle was chosen Otto gas engine. For a given waste feed-in flow considered in our computation of about 110kg/h the power output obtained is about 50 kWel. The global energy efficiency of the unit is about 15%. The results offer answers to energy recovery waste disposal for residues with characteristics that are not suitable for classic incineration or limit the energy efficiency of the process making it non-economical (the average humidity of the raw waste is about 42% in mass). The research focused on waste to energy conversion process energy efficiency, waste neutralization and power generation.

Cosmin Marculescu; Florin Alexe

2014-01-01T23:59:59.000Z

375

Summary results of an assessment of research projects in the superconductivity for electric power systems program  

SciTech Connect

The Office of Program Analysis undertook an assessment of 37 research projects sponsored by the High Temperature Superconductivity Program. This report summarizes the results of the review. Rating factors included scientific and technical merit, mission relevance, appropriateness and level of innovation, quality of project team, productivity, and probable impact on the program`s mission. Some research needs and opportunities are described that were identified by the reviewers in the areas of wire development, deposited film technology, and systems development.

NONE

1992-10-01T23:59:59.000Z

376

Environmental assessment of the atlas bio-energy waste wood fluidized bed gasification power plant. Final report  

SciTech Connect

The Atlas Bio-Energy Corporation is proposing to develop and operate a 3 MW power plant in Brooklyn, New York that will produce electricity by gasification of waste wood and combustion of the produced low-Btu gas in a conventional package steam boiler coupled to a steam-electric generator. The objectives of this project were to assist Atlas in addressing the environmental permit requirements for the proposed power plant and to evaluate the environmental and economic impacts of the project compared to more conventional small power plants. The project`s goal was to help promote the commercialization of biomass gasification as an environmentally acceptable and economically attractive alternative to conventional wood combustion. The specific components of this research included: (1) Development of a permitting strategy plan; (2) Characterization of New York City waste wood; (3) Characterization of fluidized bed gasifier/boiler emissions; (4) Performance of an environmental impact analysis; (5) Preparation of an economic evaluation; and (6) Discussion of operational and maintenance concerns. The project is being performed in two phases. Phase I, which is the subject of this report, involves the environmental permitting and environmental/economic assessment of the project. Pending NYSERDA participation, Phase II will include development and implementation of a demonstration program to evaluate the environmental and economic impacts of the full-scale gasification project.

Holzman, M.I.

1995-08-01T23:59:59.000Z

377

Integrated: Enhanced Geospatial Toolkit for Sri Lanka from NREL...  

Open Energy Info (EERE)

Data: The existing annual wind resource dataset has been expanded to include average wind speed and power for each month, annual average Weibull K shape parameter, annual...

378

Renewable Energy Technical Potential Toolkit | Open Energy Information  

Open Energy Info (EERE)

Pacific Energy Research Centre International Energy Agency Softwaremodeling tools Jordan-DLR Resource Assessments German Aerospace Center (DLR) Softwaremodeling tools Dataset...

379

Damodar Valley Corporation, Chandrapura Unit 2 Thermal Power Station Residual Life Assessment Summary report  

SciTech Connect

The BHEL/NTPC/PFC/TVA teams assembled at the DVC`s Chadrapura station on July 19, 1994, to assess the remaining life of Unit 2. The workscope was expanded to include major plant systems that impact the unit`s ability to sustain generation at 140 MW (Units 1-3 have operated at average rating of about 90 MW). Assessment was completed Aug. 19, 1994. Boiler pressure parts are in excellent condition except for damage to primary superheater header/stub tubes and economizer inlet header stub tubes. The turbine steam path is in good condition except for damage to LP blading; the spar rotor steam path is in better condition and is recommended for Unit 2. Nozzle box struts are severely cracked from the flame outs; the cracks should not be repaired. HP/IP rotor has surface cracks at several places along the steam seal areas; these cracks are shallow and should be machined out. Detailed component damage assessments for above damaged components have been done. The turbine auxiliary systems have been evaluated; cooling tower fouling/blockage is the root cause for the high turbine back pressure. The fuel processing system is one of the primary root causes for limiting unit capacity. The main steam and hot reheat piping systems were conservatively designed and have at least 30 years left;deficiencies needing resolution include restoration of insulation, replacement of 6 deformed hanger clamp/bolts, and adjustment of a few hanger settings. The cold reheat piping system is generally in good condition; some areas should be re-insulated and the rigid support clamps/bolts should be examined. The turbine extraction piping system supports all appeared to be functioning normally.

NONE

1995-02-01T23:59:59.000Z

380

Phase 1 Development Report for the SESSA Toolkit.  

SciTech Connect

The Site Exploitation System for Situational Awareness ( SESSA ) tool kit , developed by Sandia National Laboratories (SNL) , is a comprehensive de cision support system for crime scene data acquisition and Sensitive Site Exploitation (SSE). SESSA is an outgrowth of another SNL developed decision support system , the Building R estoration Operations Optimization Model (BROOM), a hardware/software solution for data acquisition, data management, and data analysis. SESSA was designed to meet forensic crime scene needs as defined by the DoD's Military Criminal Investigation Organiza tion (MCIO) . SESSA is a very comprehensive toolki t with a considerable amount of database information managed through a Microsoft SQL (Structured Query Language) database engine, a Geographical Information System (GIS) engine that provides comprehensive m apping capabilities, as well as a an intuitive Graphical User Interface (GUI) . An electronic sketch pad module is included. The system also has the ability to efficiently generate necessary forms for forensic crime scene investigations (e.g., evidence submittal, laboratory requests, and scene notes). SESSA allows the user to capture photos on site, and can read and generate ba rcode labels that limit transcription errors. SESSA runs on PC computers running Windows 7, but is optimized for touch - screen tablet computers running Windows for ease of use at crime scenes and on SSE deployments. A prototype system for 3 - dimensional (3 D) mapping and measur e ments was also developed to complement the SESSA software. The mapping system employs a visual/ depth sensor that captures data to create 3D visualizations of an interior space and to make distance measurements with centimeter - level a ccuracy. Output of this 3D Model Builder module provides a virtual 3D %22walk - through%22 of a crime scene. The 3D mapping system is much less expensive and easier to use than competitive systems. This document covers the basic installation and operation of th e SESSA tool kit in order to give the user enough information to start using the tool kit . SESSA is currently a prototype system and this documentation covers the initial release of the tool kit . Funding for SESSA was provided by the Department of Defense (D oD), Assistant Secretary of Defense for Research and Engineering (ASD(R&E)) Rapid Fielding (RF) organization. The project was managed by the Defense Forensic Science Center (DFSC) , formerly known as the U.S. Army Criminal Investigation Laboratory (USACIL) . ACKNOWLEDGEMENTS The authors wish to acknowledge the funding support for the development of the Site Exploitation System for Situational Awareness (SESSA) toolkit from the Department of Defense (DoD), Assistant Secretary of Defense for Research and Engineering (ASD(R&E)) Rapid Fielding (RF) organization. The project was managed by the Defense Forensic Science Center (DFSC) , formerly known as the U.S. Army Criminal Investigation Laboratory (USACIL). Special thanks to Mr. Garold Warner, of DFSC, who served as the Project Manager. Individuals that worked on the design, functional attributes, algorithm development, system arc hitecture, and software programming include: Robert Knowlton, Brad Melton, Robert Anderson, and Wendy Amai.

Knowlton, Robert G.; Melton, Brad J; Anderson, Robert J.

2014-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Application of fault tree analysis for customer reliability assessment of a distribution power system  

Science Journals Connector (OSTI)

A new method is developed for predicting customer reliability of a distribution power system using the fault tree approach with customer weighted values of component failure frequencies and downtimes. Conventional customer reliability prediction of the electric grid employs the system average (SA) component failure frequency and downtime that are weighted by only the quantity of the components in the system. These SA parameters are then used to calculate the reliability and availability of components in the system, and eventually to find the effect on customer reliability. Although this approach is intuitive, information is lost regarding customer disturbance experiences when customer information is not utilized in the SA parameter calculations, contributing to inaccuracies when predicting customer reliability indices in our study. Hence our new approach directly incorporates customer disturbance information in component failure frequency and downtime calculations by weighting these parameters with information of customer interruptions. This customer weighted (CW) approach significantly improves the prediction of customer reliability indices when applied to our reliability model with fault tree and two-state Markov chain formulations. Our method has been successfully applied to an actual distribution power system that serves over 2.1 million customers. Our results show an improved benchmarking performance on the system average interruption frequency index (SAIFI) by 26% between the SA-based and CW-based reliability calculations.

Fariz Abdul Rahman; Athi Varuttamaseni; Michael Kintner-Meyer; John C. Lee

2013-01-01T23:59:59.000Z

382

Life cycle assessment of a community hydroelectric power system in rural Thailand  

Science Journals Connector (OSTI)

Rural electrification and the provision of low cost, low emission technology in developing countries require decision makers to be well informed on the costs, appropriateness and environmental credentials of all available options. While cost and appropriateness are often shaped by observable local considerations, environmental considerations are increasingly influenced by global concerns which are more difficult to identify and convey to all stakeholders. Life cycle assessment is an iterative process used to analyse a product or system. This study iteratively applies life cycle assessment (LCA) to a 3kW community hydroelectric system located in Huai Kra Thing (HKT) village in rural Thailand. The cradle to grave analysis models the hydropower schemes construction, operation and end of life phases over a period of twenty years and includes all relevant equipment, materials and transportation. The study results in the enumeration of the environmental credentials of the HKT hydropower system and highlights the need to place environmental performance, and LCA itself, in a proper context. In the broadest sense, LCA results for the HKT hydropower system are found to reflect a common trend reported in hydropower LCA literature, namely that smaller hydropower systems have a greater environmentally impact per kWh perform less well environmentally - than larger systems. Placed within a rural electrification context, however, the HKT hydropower system yields better environmental and financial outcomes than diesel generator and grid connection alternatives.

Andrew Pascale; Tania Urmee; Andrew Moore

2011-01-01T23:59:59.000Z

383

Darrieus vertical axis wind turbine for power generation I: Assessment of Darrieus VAWT configurations  

Science Journals Connector (OSTI)

Abstract This paper aims to assess the Darrieus vertical axis wind turbine (VAWT) configurations, including the drawbacks of each variation that hindered the development into large scale rotor. A comprehensive timeline is given as a lineage chart. The variations are assessed on the performance, components and operational reliability. In addition, current development and future prospects of Darrieus VAWT are presented. The Darrieus VAWT patented in France in 1925 and in the US in 1931 had two configurations: (i) curved blades and (ii) straight blades configurations. Curved blades configuration (egg-beater or phi-rotor) has evolved from the conventional guy-wires support into fixed-on-tower and cantilevered versions. Straight blades configuration used to have variable-geometry (Musgrove-rotor), variable-pitch (Giromill), Diamond, Delta and V/Y rotor variations. They were stopped due to low economical value, i.e. high specific cost of energy (COE). Musgrove-rotor has evolved into fixed-pitch straight-bladed H-rotor (referred as H-rotor in this paper for simplicity). H-rotor, in turn, has evolved into several variations: Articulating, Tilted and Helical H-rotors.

Willy Tjiu; Tjukup Marnoto; Sohif Mat; Mohd Hafidz Ruslan; Kamaruzzaman Sopian

2015-01-01T23:59:59.000Z

384

Solar and Wind Resource Assessments for Afghanistan and Pakistan  

SciTech Connect

The U.S. National Renewable Energy Laboratory (NREL) has recently completed the production of high-resolution wind and solar energy resource maps and related data products for Afghanistan and Pakistan. The resource data have been incorporated into a geospatial toolkit (GsT), which allows the user to manipulate the resource information along with country-specific geospatial information such as highway networks, power facilities, transmission corridors, protected land areas, etc. The toolkit allows users to then transfer resource data for specific locations into NREL's micropower optimization model known as HOMER.

Renne, D. S.; Kelly, M.; Elliott, D.; George, R.; Scott, G.; Haymes, S.; Heimiller, D.; Milbrandt, A.; Cowlin, S.; Gilman, P.; Perez, R.

2007-01-01T23:59:59.000Z

385

TagMe: an easy-to-use toolkit for turning the personal environment into an extended communications interface  

E-Print Network (OSTI)

In this paper we present an end-user toolkit for easy creation of responsive objects and environments. TagMe consists of a wearable device that recognizes the object or surface the user is touching. The user can make ...

Benavides Palos, Xavier

386

Assessment of Structural and Clad Materials for Fission Surface Power Systems  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ORNL/LTR-2011/351 ORNL/LTR-2011/351 Reactor Pressure Vessel Task of Light Water Reactor Sustainability Program: Initial Assessment of Thermal Annealing Needs and Challenges September 2011 Prepared by R.K. Nanstad, Oak Ridge National Laboratory and W. L. Server, ATI Consulting This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product,

387

Assessment  

NLE Websites -- All DOE Office Websites (Extended Search)

Assessment of the Surveillance Program of the High-Level Waste Storage Tanks at Hanford :.I LALI iE REJ 163 ROOM 1t 4 F77L. -77 .:earmn OfEeg Asitn Sertr fo niomn 4 z. r...

388

Graphical Toolkits for Rapid Prototyping of Multimodal Systems: A Survey  

Science Journals Connector (OSTI)

......conceives the operation of an interactive system as a group of...composite events, system states and synchronization...have the same power as Petri nets...Moore R. Handbook of Multimodal and Spoken Dialogue Systems. (2000) The......

Fredy Cuenca; Karin Coninx; Davy Vanacken; Kris Luyten

2014-03-01T23:59:59.000Z

389

Development and Demonstration of a Modeling Framework for Assessing the Efficacy of Using Mine Water for Thermoelectric Power Generation  

SciTech Connect

Thermoelectric power plants use large volumes of water for condenser cooling and other plant operations. Traditionally, this water has been withdrawn from the cleanest water available in streams and rivers. However, as demand for electrical power increases it places increasing demands on freshwater resources resulting in conflicts with other off stream water users. In July 2002, NETL and the Governor of Pennsylvania called for the use of water from abandoned mines to replace our reliance on the diminishing and sometimes over allocated surface water resource. In previous studies the National Mine Land Reclamation Center (NMLRC) at West Virginia University has demonstrated that mine water has the potential to reduce the capital cost of acquiring cooling water while at the same time improving the efficiency of the cooling process due to the constant water temperatures associated with deep mine discharges. The objectives of this project were to develop and demonstrate a user-friendly computer based design aid for assessing the costs, technical and regulatory aspects and potential environmental benefits for using mine water for thermoelectric generation. The framework provides a systematic process for evaluating the hydrologic, chemical, engineering and environmental factors to be considered in using mine water as an alternative to traditional freshwater supply. A field investigation and case study was conducted for the proposed 300 MW Beech Hollow Power Plant located in Champion, Pennsylvania. The field study based on previous research conducted by NMLRC identified mine water sources sufficient to reliably supply the 2-3,000gpm water supply requirement of Beech Hollow. A water collection, transportation and treatment system was designed around this facility. Using this case study a computer based design aid applicable to large industrial water users was developed utilizing water collection and handling principals derived in the field investigation and during previous studies of mine water and power plant cooling. Visual basic software was used to create general information/evaluation modules for a range of power plant water needs that were tested/verified against the Beech Hollow project. The program allows for consideration of blending mine water as needed as well as considering potential thermal and environmental benefits that can be derived from using constant temperature mine water. Users input mine water flow, quality, distance to source, elevations to determine collection, transport and treatment system design criteria. The program also evaluates low flow volumes and sustainable yields for various sources. All modules have been integrated into a seamless user friendly computer design aid and user's manual for evaluating the capital and operating costs of mine water use. The framework will facilitate the use of mine water for thermoelectric generation, reduce demand on freshwater resources and result in environmental benefits from reduced emissions and abated mine discharges.

None

2010-03-01T23:59:59.000Z

390

Energy System and Scenario Analysis Toolkit | Open Energy Information  

Open Energy Info (EERE)

(Redirected from Gateway:International/Energy Scenario Analysis) (Redirected from Gateway:International/Energy Scenario Analysis) Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other

391

Life Cycle Assessment of a Parabolic Trough Concentrating Solar Power Plant and Impacts of Key Design Alternatives: Preprint  

SciTech Connect

Climate change and water scarcity are important issues for today's power sector. To inform capacity expansion decisions, hybrid life cycle assessment is used to evaluate a reference design of a parabolic trough concentrating solar power (CSP) facility located in Daggett, California, along four sustainability metrics: life cycle greenhouse gas (GHG) emissions, water consumption, cumulative energy demand (CED), and energy payback time (EPBT). This wet-cooled, 103 MW plant utilizes mined nitrate salts in its two-tank, thermal energy storage (TES) system. Design alternatives of dry-cooling, a thermocline TES, and synthetically-derived nitrate salt are evaluated. During its life cycle, the reference CSP plant is estimated to emit 26 g CO2eq per kWh, consume 4.7 L/kWh of water, and demand 0.40 MJeq/kWh of energy, resulting in an EPBT of approximately 1 year. The dry-cooled alternative is estimated to reduce life cycle water consumption by 77% but increase life cycle GHG emissions and CED by 8%. Synthetic nitrate salts may increase life cycle GHG emissions by 52% compared to mined. Switching from two-tank to thermocline TES configuration reduces life cycle GHG emissions, most significantly for plants using synthetically-derived nitrate salts. CSP can significantly reduce GHG emissions compared to fossil-fueled generation; however, dry-cooling may be required in many locations to minimize water consumption.

Heath, G. A.; Burkhardt, J. J.; Turchi, C. S.

2011-09-01T23:59:59.000Z

392

Multi-criteria assessment of combined cooling, heating and power systems located in different regions in Japan  

Science Journals Connector (OSTI)

Abstract As an efficient measure for rational use of energy, the combined cooling, heating and power (CCHP) system plays an increasingly important role in commercial buildings in Japan. In this study, aiming at examining the influences of building type and climate condition on the introduction of CCHP systems, four representative commercial building categories (hotel, hospital, store and office) located in six major climate zones in Japan are compared and evaluated. In order to have a comprehensive understanding about the performances of the assumed CCHP systems, besides simple assessment from energy, economic and environmental aspects, a multi-criteria evaluation method has been employed for the final determination. According to the assessment results, the CCHP systems in hotels and hospitals enjoy better overall performances than those in stores and offices. On the other hand, the potentials of energy-saving and CO2 emission reduction of the CCHP systems in the mild climate zones are smaller than that in other climate zones. In addition, the performances of CCHP systems in stores and offices located in Kagoshima are superior to those in other cities; while, CCHP systems in hospitals and hotels located in Sapporo illustrate better overall performance.

Qiong Wu; Hongbo Ren; Weijun Gao; Jianxing Ren

2014-01-01T23:59:59.000Z

393

LEDSGP/Transportation Toolkit/Key Actions/Develop Alternative Scenarios |  

Open Energy Info (EERE)

Develop Alternative Scenarios Develop Alternative Scenarios < LEDSGP‎ | Transportation Toolkit‎ | Key Actions(Redirected from Transportation Toolkit/Key Actions/Develop Alternative Scenarios) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low-emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a way that complements existing climate and development goals in other sectors. Planners, researchers, and decision-makers should customize this LEDS implementation framework for the specific conditions of their transport

394

LEDSGP/Transportation Toolkit/Key Actions/Develop Alternative Scenarios |  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Key Actions/Develop Alternative Scenarios < LEDSGP‎ | Transportation Toolkit‎ | Key Actions Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a way that complements existing climate and development goals in other

395

Development of a Measurement and Verification (M&V) Costing Toolkit  

E-Print Network (OSTI)

into two parts, including the cost summary and detailed costing information. Labor costs and weather information spreadsheets are also included in each of the workbooks. DESCRIPTION OF THE TOOLKIT Costing Information Input for the Utility... utility billing analysis across 100s of meters for a large retrofit project, which uses weather data from the National Weather Service (NWS). In this figure it is estimated that the one-time setup will take 4 hours of time at $40 per hour, and ? hour...

Haberl, J. S.; Lewis, T.; Im, P.; Carlson, K. A.; Underwood, D.

2004-01-01T23:59:59.000Z

396

Using the Physics-based Rendering Toolkit for Medical Reconstruction  

E-Print Network (OSTI)

emission computed tomography (SPECT), one of such imaging tech- niques, creates images of the radioactive@phas.ubc.ca, MIRG/UBC 1In fact, due to the limitations of the human perceptual system and the computational power Dagenais1), Anna Celler2), and Torsten M¨oller1) Abstract-- In this paper we cast the problem of tomography

Möller, Torsten

397

Feasibility Assessment of the Water Energy Resources of the United States for New Low Power and Small Hydro Classes of Hydroelectric Plants: Main Report and Appendix A  

Energy.gov (U.S. Department of Energy (DOE))

Main Report and Appendix A: Evaluates water energy resource sites identified in the resource assessment study reported in Water Energy Resources of the United States with Emphasis on Low Head/Low Power Resources, DOE/ID-11111, April 2004 to identify which could feasibly be developed using a set of feasibility criteria. The gross power potential of the sites estimated in the previous study was refined to determine the realistic hydropower potential of the sites using a set of development criteria assuming they are developed as low power (less than 1 MWa) or small hydro (between 1 and 30 MWa) projects.

398

Feasibility Assessment of the Water Energy Resources of the United States for New Low Power and Small Hydro Classes of Hydroelectric Plants: Main Report and Appendix A  

Energy.gov (U.S. Department of Energy (DOE))

Evaluates water energy resource sites identified in the resource assessment study reported in Water Energy Resources of the United States with Emphasis on Low Head/Low Power Resources, DOE/ID-11111, April 2004 to identify which could feasibly be developed using a set of feasibility criteria.

399

EnviroDB: Applied Database Systems Design for the National Environmental Assessment Toolkit (NEAT)  

E-Print Network (OSTI)

(CO 2 ), carbon monoxide (CO), volatile organic compounds (VOC), particulates (PM), air velocity (AIR_VEL), light levels at 3 locations (LGH), and a photometric camera that analyzes brightness/contrast and glare. The sensor outputs are recorded...

Kim, S. H.; Srivastava, V.; Aziz, A.

2005-01-01T23:59:59.000Z

400

DOE/EA-1631: Final Environmental Assessment for Department of Energy Loan Guarantee for Beacon Power Corporation Frequency Regulation Facility in Stephentown, NY (February 2009)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 31 Environmental Assessment for DEPARTMENT OF ENERGY LOAN GUARANTEE FOR BEACON POWER CORPORATION FREQUENCY REGULATION FACILITY IN STEPHENTOWN, N.Y. U.S. Department of Energy Loan Guarantee Program Office Washington, DC 20585 February 2009 FINAL ENVIRONMENTAL ASSESSMENT Environmental Assessment for Department of Energy Loan Guarantee for Beacon Power Corporation Frequency Regulation Facility in Stephentown, N.Y. DOE/EA-1631 TABLE OF CONTENTS LIST OF ACRONYMS iii 1.0 PURPOSE AND NEED 1 1.1 Introduction 1 1.2 Purpose and Need for Agency Action 1 2.0 DESCRIPTION OF PROPOSED ACTION AND NO ACTION ALTERNATIVE 3 2.1 Location 3 2.2 Proposed Action 3 2.2.1 Flywheel 3 2.2.2 Project Elements 4 2.2.3 Project Systems 5 2.2.4 Construction

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Environmental assessment of offshore wind power generation near Rhode Island: Acoustic and electromagnetic effects on marine animals.  

Science Journals Connector (OSTI)

An offshore wind farm is planned for Rhode Island coastal waters. The developer has proposed to deploy wind turbines in two stages: 5 turbines in shallow waters 5 km south of Block Island and 100 turbines in deeper waters 30 km to the east. As part of the planning of the proposed offshore wind powergeneration project under the Rhode Island Special Area Management Plan ambient acoustic and electromagneticmeasurements were made in the area. Two passive acoustic listener (PAL) systems were deployed within 4 km of Block Island from October 6 to November 11 2008. Data from the PALs were used to compute the ocean acousticnoise budget and other statistics by source. Transmission loss measurements were also made to support the noise budget calculation. Measurements of airborne noise from a 1.5?MW land?based wind turbine already in operation in Rhode Island were made. To support the electromagneticeffect study an underwater magnetometer was towed at the two proposed sites and over an operational underwater 23?kV power cable. A preliminary assessment of the effects of the offshore wind farm on marine animals at these sites will be presented. [Funding provided by the RI Office of Energy Resources.

James H. Miller; Gopu R. Potty; Kathleen Vigness Raposa; David Casagrande; Lisa Miller; Steven E. Crocker; Robert Tyce; Jonathan Preston; Brian Roderick; Jeffrey A. Nystuen; Peter M. Scheifele

2009-01-01T23:59:59.000Z

402

Using direct normal irradiance models and utility electrical loading to assess benefit of a concentrating solar power plant  

Science Journals Connector (OSTI)

The objective of this paper was to determine if three different direct normal irradiance (DNI) models were sufficiently accurate to determine if concentrating solar power (CSP) plants could meet the utility electrical load. DNI data were measured at three different laboratories in the United States and compared with DNI calculated by three DNI models. In addition, utility electrical loading data were obtained for all three locations. The DNI models evaluated were: the Direct Insolation Simulation Code (DISC), DIRINT, and DIRINDEX. On an annual solar insolation (e.g. kWh/m2) basis, the accuracy of the DNI models at all three locations was within: 7% (DISC), 5% (DIRINT), and 3% (DIRINDEX). During the three highest electrical loading months at the three locations, the monthly accuracy varied from: 0% to 16% (DISC), 0% to 9% (DIRINT), and 0% to 8% (DIRINDEX). At one location different pyranometers were used to measure GHI, and the most expensive pyranometers did not improve the DNI model monthly accuracy. In lieu of actually measuring DNI, using the DIRINT model was felt to be sufficient for assessing whether to build a CSP plant at one location, but use of either the DIRINT or DIRINDEX models was felt to be marginal for the other two locations due to errors in modeling DNI for utility peak electrical loading days especially for partly cloudy days.

Brian D. Vick; Daryl R. Myers; William E. Boyson

2012-01-01T23:59:59.000Z

403

The EOP Visualization Module Integrated into the Plasma On-Line Nuclear Power Plant Safety Monitoring and Assessment System  

SciTech Connect

An ambitious project to replace the unit information systems (UISs) at the Hungarian Paks nuclear power plant was started in 1998-99. The basic aim of the reconstruction project is to install a modern, distributed UIS architecture on all four Paks VVER-440 units. The new UIS includes an on-line plant safety monitoring and assessment system (PLASMA), which contains a critical safety functions monitoring module and provides extensive operator support during the execution of the new, symptom-oriented emergency operating procedures (EOPs). PLASMA includes a comprehensive EOP visualization module, based on the COPMA-III procedure-handling software developed by the Organization for Economic Cooperation and Development, Halden Reactor Project. Intranet technology is applied for the presentation of the EOPs with the use of a standard hypertext markup language (HTML) browser as a visualization tool. The basic design characteristics of the system, with a detailed description of its user interface and functions of the new EOP display module, are presented.

Hornaes, Arne [Organization for Economic Cooperation and Development (France); Hulsund, John Einar [Organization for Economic Cooperation and Development (France); Vegh, Janos [KFKI Atomic Energy Research Institute (Hungary); Major, Csaba [KFKI Atomic Energy Research Institute (Hungary); Horvath, Csaba [KFKI Atomic Energy Research Institute (Hungary); Lipcsei, Sandor [KFKI Atomic Energy Research Institute (Hungary); Kapocs, Gyoergy [Paks Nuclear Power Plant Ltd. (Hungary)

2001-08-15T23:59:59.000Z

404

Assessment of energy and economic impacts of particulate-control technologies in coal-fired power generation  

SciTech Connect

Under contract to Argonne National Laboratory, Midwest Research Institute has derived models to assess the economic and energy impacts of particulate-control systems for coal-fired power plants. The models take into account the major functional variables, including plant size and location, coal type, and applicable particulate-emission standards. The algorithms obtained predict equipment and installation costs, as well as operating costs (including energy usage), for five control devices: (1) cold-side electrostatic precipitators, (2) hot-side electrostatic precipitators, (3) reverse-flow baghouses, (4) shake baghouses, and (5) wet scrubbers. A steam-generator performance model has been developed, and the output from this model has been used as input for the control-device performance models that specify required design and operating parameters for the control systems under study. These parameters then have been used as inputs to the cost models. Suitable guideline values have been provided for independent variables wherever necessary, and three case studies are presented to demonstrate application of the subject models. The control-equipment models aggregate the following cost items: (1) first costs (capital investment), (2) total, first-year annualized costs, and (3) integrated cost of ownership and operation over any selected plant lifetime. Although the models have been programmed for rapid computation, the algorithms can be solved with a hand calculator.

Not Available

1980-04-01T23:59:59.000Z

405

An Overview of strategic measures to assess workforce needs and ensure technology transfer to meet current and future nuclear power operations  

SciTech Connect

Between 1956 and 1989, the number of operating commercial nuclear power plants in the United States increased from none to 109. With the exception of a few plants that were still in final construction, no new nuclear power plants were ordered in the United States as the new millennium began. In 2005, the federal government pronounced the need for new electric power generating systems during the first quarter of the 21. century. The need comes from a desire to curb our reliance on fossil fuels, as well as to provide for a cleaner environment. One of those fuel systems noted was nuclear energy. Given the time between the last active period of nuclear power plant development and construction, there is a need to supply a talented and well-prepared workforce to operate the new plants. It will also be necessary to assess the needs of our current fleet of operating nuclear power plants, of which many are in the process of re-licensing, yet also facing an aging plant workforce. This paper will review and discuss measures to assess diverse workforce needs and technology transfer to meet current licensing requirements as that of future nuclear power plant development in the United States. (authors)

Vincenti, J.R. [acuri.net, 1344 Curtin Street, State College, PA (United States); Stigers, R.A. [Senior Health Physicist-Radwaste, PPL Susquehanna, Berwick, PA (United States)

2007-07-01T23:59:59.000Z

406

Plant Design and Cost Assessment of Forced Circulation Lead-Bismuth Cooled Reactor with Conventional Power Conversion Cycles  

E-Print Network (OSTI)

Cost of electricity is the key factor that determines competitiveness of a power plant. Thus the proper selection, design and optimization of the electric power generating cycle is of main importance. This report makes an ...

Dostal, Vaclav

407

Assessing the Benefits of On-Site Combined Heat and Power During the August 14, 2003, Blackout, June 2004  

Energy.gov (U.S. Department of Energy (DOE))

This June 2004 report summarizes the experiences of 12 combined heat and power facilities during the August 14, 2003, blackout

408

Central power generation versus distributed generation e An air quality assessment in the South Coast Air Basin of California  

E-Print Network (OSTI)

., Suite 200, San Francisco, CA 94111, USA c Advanced Power and Energy Program, Department of Mechanical obstacles to transmission line additions may force even central power generation back into air basins by the year 2020. The intermittent nature of renewable sources like wind and solar power may require

Dabdub, Donald

409

Preprint for Space Weather Journal (2014) Assessing the impact of space weather on the electric power grid  

E-Print Network (OSTI)

power grid based on insurance claims for industrial electrical equipment C. J. Schrijver1 , R. Dobbins2 disturbances in the electric power grid. Here, we perform a statistical analysis of 11,242 insurance claims on geomagnetic activity mirrors that of major disturbances in the U.S. high-voltage elec- tric power grid

Schrijver, Karel

410

Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume VI. Safety and environmental considerations for licensing  

SciTech Connect

This volume of the Nonproliferation Alternative Systems Assessment Program report addresses safety and environmental considerations in licensing the principal alternative nuclear reactors and fuel cycles in the United States for large-scale commercial nuclear power plants. In addition, this volume examines the safety and environmental considerations for licensing fuel service centers. These centers, which have been proposed for controlling sensitive fuel-cycle facilities and special nuclear materials, would contain a combination of such facilities as reprocessing plants, fabrication plants, and reactors. For this analysis, two fuel service center concepts were selected - one with power - generating capability and one without.

Not Available

1980-06-01T23:59:59.000Z

411

2010 Manufacturing Readiness Assessment Update to the 2008 Report for Fuel Cell Stacks and Systems for the Backup Power and Material Handling Equipment Markets  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Readiness Manufacturing Readiness Assessment Update to the 2008 Report for Fuel Cell Stacks and Systems for the Backup Power and Material Handling Equipment Markets Doug Wheeler DJW Technology Michael Ulsh National Renewable Energy Laboratory Technical Report NREL/TP-5600-53046 August 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 15013 Denver West Parkway Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 2010 Manufacturing Readiness Assessment Update to the 2008 Report for Fuel Cell Stacks and Systems for the Backup Power

412

Air Pollution Teaching Toolkit Manual on how to teach Air Pollution to Students of Grade 79Air Pollution Teaching Toolkit Manual on how to teach air pollution to students of Grade 79 Prepared by  

E-Print Network (OSTI)

Users may reproduce and use content of this Toolkit for noncommercial purposes by informing and giving due credit to aforementioned organizations and writers who hold copyright. No other uses are permitted without the express written permission of the aforementioned organizations. Layout Design and Printing by

Charina Cabrido; Gopal Raj Joshi

413

Grid Impacts of Wind Power Variability: Recent Assessments from a Variety of Utilities in the United States (Presentation)  

SciTech Connect

Presentation for the European Wind Energy Conference held February 27--March 2, 2006, in Athens, Greece, showing grid impacts of wind power variability.

Parsons, B.

2006-03-01T23:59:59.000Z

414

Final Environmental Assessment Small-Scale Geothermal Power Plant and Direct-Use Geothermal Application at AmeriCulture Inc., Cotton City, NM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Colorado 80401-3393 Colorado 80401-3393 August 26, 2002 DOE/EA-1396 FINDING OF NO SIGNIFICANT IMPACT For the SMALL-SCALE POWER PLANT AND DIRECT-USE GEOTHERMAL APPLICATION At AMERICULTURE, INC., COTTON CITY, NEW MEXICO AGENCY: U.S. Department of Energy, Golden Field Office ACTION: Finding of No Significant impact (FONSI) SUMMARY: The U.S. Department of Energy (DOE) conducted an Environmental Assessment (EA) of the Small-Scale Power Plant and Direct-Use Application at AmeriCulture, Inc. to evaluate potential impacts of construction and operations that would be funded in part by DOE. Small geothermal power plants have the potential for widespread application, but achieving cost- effectiveness in small plant sizes presents a number of challenges. To address these challenges, DOE is supporting the small-scale field verification projects to (1) determine and validate the

415

Final Report, Wind Power Resource Assessment on the Warm Springs Reservation Tribal Lands, Report No. DOE/GO/12103  

SciTech Connect

This report concludes a five-year assessment of wind energy potential on the Confederated Tribes of Warm Springs Reservation of Oregon lands.

Jim Manion, Warm Springs Power & Water Enterprises; David McClain, McClain & Associates; HDR Engineering; Dr. Stel Walker, Oregon State University

2007-09-10T23:59:59.000Z

416

PowerPoint Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Snapshot 2.3 * Flexible coupling of physics components * Toolkit of components * Rigorous software processes * Scalable existing and future HPC platforms * Attention to usability *...

417

Conservation Screening Curves to Compare Efficiency Investments to Power Plants  

E-Print Network (OSTI)

Power Research Institute. 1986. TAG-Technical AssessmentPower Research Institute. 1987. TAG-Technical Assessment

Koomey, J.G.

2008-01-01T23:59:59.000Z

418

Environmental assessment of German electricity generation from coal-fired power plants with amine-based carbon capture  

Science Journals Connector (OSTI)

One of the most important sources of global carbon dioxide emissions is the combustion of fossil...2 emissions. Therefore, the increased requirements for climate protection are a great challenge for the power pro...

Andrea Schreiber; Petra Zapp

2009-09-01T23:59:59.000Z

419

Assessing business models arising from the integration of distributed energy systems in the Chilean electric power system  

E-Print Network (OSTI)

Electric power systems are more than just networks of generation, transmission and distribution assets. They are socio-technical systems, involving regulation, markets and technology availability. Presently, the dynamic ...

Le Dantec, Jorge I. (Jorge Ignacio)

2014-01-01T23:59:59.000Z

420

Abstract--An important aspect of the study of power system markets involves the assessment of strategic behavior of  

E-Print Network (OSTI)

when there are potentially binding constraints in an electricity market poses difficulties. The major goal of this restructuring is lowering prices through harnessing competition. However, the electric power industry has the characteristics of an oligopoly with imperfect competition, so

Baldick, Ross

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Performances of a thermal-storage module in a solar-energy power production perspective: A numerical assessment  

Science Journals Connector (OSTI)

A theoretical model has been developed to describe the cyclic behaviour of a latent-heat thermal-storage module. Attention has been focused on power production applications, where stability of the heat supply ...

C. Bellecci; M. Conti

422

Funding Toolkit  

NLE Websites -- All DOE Office Websites (Extended Search)

Additional Funding Additional Funding QuarkNet Home - Information - Calendar - Contacts - Projects - Forms: EoI - Teachers Many additional sources of funding are available above and beyond the QuarkNet funds. They can be in the form of money, supplies, matching funds and in-kind contributions. The sources run from National Science Foundation (NSF) grants to local stores in your area. Some of those sources are listed below. If you know of others, please send them in. Sources of Funds Name Source Deadline Amount Availability Research Experience for Teachers (RET) National Science Foundation (NSF) Anytime Can fund multiple teachers for 8 weeks Annually Venture Fund American Association of Physics Teachers (AAPT) None Up to $25,000 to promote the development and marketing of innovative teaching products and services One project at a time

423

Funding Toolkit  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Experience for Teachers (RET) Research Experience for Teachers (RET) Organization: National Science Foundation (NSF) Deadline: NA Limitations: Institution must have a REU grant or be applying for one Amount varies depending on needs. An institution can apply for up to 2 months of a teacher's annualized salary for as many teachers as necessary. Available annually The institution MUST have a Research Experience for Undergraduates (REU) grant or must be applying for an REU grant along with the RET grant. The RET request (as supplement or as part of the proposal) should address the following points. The request should describe the plan for teacher activities and the nature of involvement with the REU site program. One special goal of this involvement should be to incorporate the outcome of

424

LEDSGP/Transportation Toolkit/Key Actions/Implement and Monitor | Open  

Open Energy Info (EERE)

Actions/Implement and Monitor Actions/Implement and Monitor < LEDSGP‎ | Transportation Toolkit‎ | Key Actions Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low-emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a way that complements existing climate and development goals in other sectors. Planners, researchers, and decision-makers should customize this LEDS implementation framework for the specific conditions of their transport sector, choosing from relevant resources to achieve a comprehensive action

425

Spatial distribution and risk assessment of radionuclides in soils around a coal-fired power plant: A case study from the city of Baoji, China  

SciTech Connect

Coal burning may enhance human exposure to the natural radionuclides that occur around coal-fired power plants (CFPP). In this study, the spatial distribution and hazard assessment of radionuclides found in soils around a CFPP were investigated using statistics, geostatistics, and geographic information system (GIS) techniques. The concentrations of Ra-226, Th-232, and K-40 in soils range from 12.54 to 40.18, 38.02 to 72.55, and 498.02 to 1126.98 Bq kg{sup -1}, respectively. Ordinary kriging was carried out to map the spatial patterns of radionuclides, and disjunctive kriging was used to quantify the probability of radium equivalent activity (Ra{sub eq}) higher than the threshold. The maps show that the spatial variability of the natural radionuclide concentrations in soils was apparent. The results of this study could provide valuable information for risk assessment of environmental pollution and decision support.

Dai, L.J.; Wei, H.Y.; Wang, L.Q. [Shaanxi Normal University, Xian (China)

2007-06-15T23:59:59.000Z

426

Spatial distribution and risk assessment of radionuclides in soils around a coal-fired power plant: A case study from the city of Baoji, China  

SciTech Connect

Coal burning may enhance human exposure to the natural radionuclides that occur around coal-fired power plants (CFPP). In this study, the spatial distribution and hazard assessment of radionuclides found in soils around a CFPP were investigated using statistics, geostatistics, and geographic information system (GIS) techniques. The concentrations of {sup 226}Ra, {sup 232}Th, and {sup 40}K in soils range from 12.54 to 40.18, 38.02 to 72.55, and 498.02 to 1126.98 Bq kg{sup -1}, respectively. Ordinary kriging was carried out to map the spatial patterns of radionuclides, and disjunctive kriging was used to quantify the probability of radium equivalent activity (Ra{sub eq}) higher than the threshold. The maps show that the spatial variability of the natural radionuclide concentrations in soils was apparent. The results of this study could provide valuable information for risk assessment of environmental pollution and decision support.

Dai Lijun [College of Tourism and Environment, Shaanxi Normal University, 199 South Chang'an Road, Xi'an 710062 (China); Wei Haiyan [College of Tourism and Environment, Shaanxi Normal University, 199 South Chang'an Road, Xi'an 710062 (China)]. E-mail: yuxidlj@stu.snnu.edu.cn; Wang Lingqing [College of Tourism and Environment, Shaanxi Normal University, 199 South Chang'an Road, Xi'an 710062 (China)

2007-06-15T23:59:59.000Z

427

2010 Manufacturing Readiness Assessment Update to the 2008 Report for Fuel Cell Stacks and Systems for the Backup Power and Materials Handling Equipment Markets  

SciTech Connect

In 2008, the National Renewable Energy Laboratory (NREL), under contract to the US Department of Energy (DOE), conducted a manufacturing readiness assessment (MRA) of fuel cell systems and fuel cell stacks for back-up power and material handling applications (MHE). To facilitate the MRA, manufacturing readiness levels (MRL) were defined that were based on the Technology Readiness Levels previously established by the US Department of Energy (DOE). NREL assessed the extensive existing hierarchy of MRLs developed by Department of Defense (DoD) and other Federal entities, and developed a MRL scale adapted to the needs of the Fuel Cell Technologies Program (FCTP) and to the status of the fuel cell industry. The MRL ranking of a fuel cell manufacturing facility increases as the manufacturing capability transitions from laboratory prototype development through Low Rate Initial Production to Full Rate Production. DOE can use MRLs to address the economic and institutional risks associated with a ramp-up in polymer electrolyte membrane (PEM) fuel cell production. In 2010, NREL updated this assessment, including additional manufacturers, an assessment of market developments since the original report, and a comparison of MRLs between 2008 and 2010.

Wheeler, D.; Ulsh, M.

2012-08-01T23:59:59.000Z

428

Assessment of generic solar thermal systems for large power applications: analysis of electric power generating costs for systems larger than 10 MWe  

SciTech Connect

Seven generic types of collectors, together with associated subsystems for electric power generation, were considered. The collectors can be classified into three categories: (1) two-axis tracking (with compound-curvature reflecting surfaces); (2) one-axis tracking (with single-curvature reflecting surfaces); and (3) nontracking (with low-concentration reflecting surfaces). All seven collectors were analyzed in conceptual system configurations with Rankine-cycle engines. In addition, two of the collectors were analyzed with Brayton-cycle engines, and one was analyzed with a Stirling-cycle engine. With these engine options, and the consideration of both thermal and electrical storage for the Brayton-cycle central receiver, 11 systems were formulated for analysis. Conceptual designs developed for the 11 systems were based on common assumptions of available technology in the 1990 to 2000 time frame. No attempt was made to perform a detailed optimization of each conceptual design. Rather, designs best suited for a comparative evaluation of the concepts were formulated. Costs were estimated on the basis of identical assumptions, ground rules, methodologies, and unit costs of materials and labor applied uniformly to all of the concepts. The computer code SOLSTEP was used to analyze the thermodynamic performance characteristics and energy costs of the 11 concepts. Year-long simulations were performed using meteorological and insolation data for Barstow, California. Results for each concept include levelized energy costs and capacity factors for various combinations of storage capacity and collector field size.

Apley, W.J.; Bird, S.P.; Brown, D.R.; Drost, M.K.; Fort, J.A.; Garrett-Price, B.A.; Patton, W.P.; Williams, T.A.

1980-11-01T23:59:59.000Z

429

DOE/EA-1633: Environmental Assessment for Green Mountain Reservoir Substitution and Power Interference Agreements (December 2008)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green Mountain Reservoir Green Mountain Reservoir Substitution and Power Interference Agreements Final EA i Table of Contents Acronyms ...................................................................................................................................... vi 1.0 Purpose and Need .......................................................................................................... 1-1 1.1 Introduction.......................................................................................................... 1-1 1.2 Project Purpose and Need .................................................................................... 1-1 1.3 Study Area ........................................................................................................... 1-2 1.4 Background

430

Techno-economic assessments of oxy-fuel technology for South African coal-fired power stations  

Science Journals Connector (OSTI)

Abstract Oxy-fuel technology is one of the potential solutions to reduce CO2 emissions from coal-fired power plants. Although vendors offer a retrofit package, to the best of our knowledge there has not been a study undertaken that looks at the technical and economic viability of oxy-fuel technology for CO2 capture for South African coal-fired power stations. This study presents a techno-economic analysis for six coal fired power stations in South Africa. Each of these power stations has a total capacity of about 3600MW. The analysis was done using the oxy-fuel model developed by Carnegie Mellon University in the USA. The model was used to define the performance and costs of retrofitting the boilers. The results obtained showed that the CO2 emission rate was reduced by a factor of 10 for all the plants when retrofitted to oxy-fuel combustion. Between 27 and 29% of the energy generated was used to capture CO2. The energy loss was correlated to the coal properties. Sulphur content in the coal samples affects the energy used for flue gas cooling but did not affect the energy used for CO2 purification and compression. The study also showed there is a need for the flue gas to be treated for \\{NOx\\} and \\{SOx\\} control. The total capital costs and cost of electricity for the six plants were different, resulting with the cost of electricity varying from 101$/MWh to124$/MWh.

B.O. Oboirien; B.C. North; T. Kleyn

2014-01-01T23:59:59.000Z

431

Environmental Implications of United States Coal Exports: A Comparative Life Cycle Assessment of Future Power System Scenarios  

Science Journals Connector (OSTI)

Stricter emissions requirements on coal-fired power plants together with low natural gas prices have contributed to a recent decline in the use of coal for electricity generation in the United States. Faced with a shrinking domestic market, many coal ...

Barrett Bohnengel; Dalia Patio-Echeverri; Joule Bergerson

2014-07-15T23:59:59.000Z

432

Integration of biomass into urban energy systems for heat and power. Part II: Sensitivity assessment of main techno-economic factors  

Science Journals Connector (OSTI)

Abstract The paper presents the application of a mixed integer linear programming (MILP) methodology to optimize multi-biomass and natural gas supply chain strategic design for heat and power generation in urban areas. The focus is on spatial and temporal allocation of biomass supply, storage, processing, transport and energy conversion (heat and CHP) to match the heat demand of residential end users. The main aim lies on the assessment of the trade-offs between centralized district heating plants and local heat generation systems, and on the decoupling of the biomass processing and biofuel energy conversion steps. After a brief description of the methodology, which is presented in detail in Part I of the research, an application to a generic urban area is proposed. Moreover, the influence of energy demand typologies (urban areas energy density, heat consumption patterns, buildings energy efficiency levels, baseline energy costs and available infrastructures) and specific constraints of urban areas (transport logistics, air emission levels, space availability) on the selection of optimal bioenergy pathways for heat and power is assessed, by means of sensitivity analysis. On the basis of these results, broad considerations about the key factors influencing the use of bioenergy into urban energy systems are proposed. Potential further applications of this model are also described, together with main barriers for development of bioenergy routes for urban areas.

Antonio M. Pantaleo; Sara Giarola; Ausilio Bauen; Nilay Shah

2014-01-01T23:59:59.000Z

433

A fuzzy-based reliability approach to evaluate basic events of fault tree analysis for nuclear power plant probabilistic safety assessment  

Science Journals Connector (OSTI)

Abstract Fault tree analysis has been widely utilized as a tool for nuclear power plant probabilistic safety assessment. This analysis can be completed only if all basic events of the system fault tree have their quantitative failure rates or failure probabilities. However, it is difficult to obtain those failure data due to insufficient data, environment changing or new components. This study proposes a fuzzy-based reliability approach to evaluate basic events of system fault trees whose failure precise probability distributions of their lifetime to failures are not available. It applies the concept of failure possibilities to qualitatively evaluate basic events and the concept of fuzzy sets to quantitatively represent the corresponding failure possibilities. To demonstrate the feasibility and the effectiveness of the proposed approach, the actual basic event failure probabilities collected from the operational experiences of the DavidBesse design of the Babcock and Wilcox reactor protection system fault tree are used to benchmark the failure probabilities generated by the proposed approach. The results confirm that the proposed fuzzy-based reliability approach arises as a suitable alternative for the conventional probabilistic reliability approach when basic events do not have the corresponding quantitative historical failure data for determining their reliability characteristics. Hence, it overcomes the limitation of the conventional fault tree analysis for nuclear power plant probabilistic safety assessment.

Julwan Hendry Purba

2014-01-01T23:59:59.000Z

434

Assessment and validation study of nuclear reactors for low power space applications. Final report 1986, 1 November-30 April 1987  

SciTech Connect

The feasibility and safety of six conceptual small, low power nuclear reactor designs was evaluated. Feasibility evaluations included the determination of sufficient reactivity margins for seven years of full power operation and safe shutdown as well as handling during pre-launch assembly phases. Safety evaluations were concerned with the potential for maintaining subcritical conditions in the event of launch or transportation accidents. These included water immersion accident scenarios both with and without water flooding the core. Results show that most of the concepts can potentially meet the feasibility and safety requirements; however, due to the preliminary nature of the designs considered, more detailed designs will be necessary to enable these concepts to fully meet the safety requirements.

Klein, A.C.; Gedeon, S.R.; Morey, D.C.

1987-06-01T23:59:59.000Z

435

Environmental Assessment and Finding of No Significant Impact: Presidential Permit Applications for Baja California Power, Inc. and Sempra Energy Resources  

SciTech Connect

In separate actions, Sempra Energy Resources (SER) and Baja California Power, Inc. (BCP) have applied to the US Department of Energy (DOE) for Presidential permits pursuant to Executive Order (EO) No. 10485, as amended by EO 12038, and 10 CFR Section 205.320 et seq. (2000), to construct, operate, maintain, and connect electric power transmission facilities crossing the international border between the Us and Mexico. SER and BCP each propose constructing separate new double-circuit, 230,000 volt (230 kV) transmission lines extending about six miles south from the Imperial Valley Substation (IV Substation), owned and operated by San Diego Gas and Electric Company (SDG and E), to the US/Mexico international border. In each case, the objective is to connect the proposed transmission lines to natural gas fueled electric generating plants being constructed in Mexico for the purpose of importing electrical power into the US onto the southern California electrical grid. The proposed transmission lines would traverse about six miles of federal land administered by the US Department of the Interior's Bureau of Land Management (BLM).

N /A

2001-12-05T23:59:59.000Z

436

An assessment of the use of direct contact condensers with wet cooling systems for utility steam power plants  

SciTech Connect

Potential use of a direct contact condenser for steam recovery at the turbine exhaust of a utility power plant using a wet cooling system is investigated. To maintain condensate separate from the cooling water, a bank of plate heat exchangers is used. In a case study for a nominal 130-MW steam power plant, two heat rejection systems, one using a conventional surface condenser and another using a direct contact condenser together with a set of plate heat exchangers are compared on the basis of their performance, operation and maintenance, and system economics. Despite a higher initial cost for the direct contact system, the advantages it offers suggests that this system is viable both technically and economically. Key to the improvements the direct contact system offers is a higher equivalent availability for the power system. Reduction of dissolved oxygen and other metallic ions in the condensate, reduced use of chemical scavengers and polishers, and potential elimination of a plant floor are also major benefits of this system. Drawbacks include added plant components and higher initial cost. The potential for long-term cost reduction for the direct contact system is also identified.

Bharathan, D.; Hoo, E. [National Renewable Energy Lab., Golden, CO (United States)] [National Renewable Energy Lab., Golden, CO (United States); D`Errico, P. [Stone and Webster Engineering Corp., Boston, MA (United States)] [Stone and Webster Engineering Corp., Boston, MA (United States)

1992-02-01T23:59:59.000Z

437

An Assessment of the Economics of Future Electric Power Generation Options and the Implications for Fusion - Revision 1  

SciTech Connect

This study examines the potential range of electric power costs for some major alternatives to fusion electric power generation when it is ultimately deployed in the middle of the 21st century and, thus, offers a perspective on the cost levels that fusion must achieve to be competitive. The alternative technologies include coal burning, coal gasification, natural gas, nucle& fission, and renewable energy. The cost of electricity (COE) from the alternatives to fusion should be in a 30-53 mills/kWh (1999 dollars) range if carbon sequestration is not needed, 30-61 mills/kWh if sequestration is required, or as high as 83 mills/kWh for the worst-case scenario for cost uncertainty. The reference COE range for fusion was estimated at 65-102 mills/kWh for l- to 1.3-GW(e) scale power plants. Fusion costs will have tqbe, reduced and/or alternative concepts devised before fusion will be competitive with the alternatives for the future production of electricity. Fortunately, there are routes to achieve this goal.

Delene, J.G.; Sheffield, J.; Williams, K.A.; Reid, R.L.; Hadley, S.

2000-02-01T23:59:59.000Z

438

DOE/EA-1616: Environmental Assessment for Carbon Research Center Project at Southern Company Services' Power Systems Development Facility near Wilsonville, Alabama (DOE/EA-1616) (9/2008)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

16 16 CARBON RESEARCH CENTER PROJECT AT SOUTHERN COMPANY SERVICES' POWER SYSTEMS DEVELOPMENT FACILITY NEAR WILSONVILLE, ALABAMA FINAL ENVIRONMENTAL ASSESSMENT U.S. DEPARTMENT OF ENERGY Office of Fossil Energy National Energy Technology Laboratory SEPTEMBER 2008 COVER SHEET Responsible Agency: U.S. Department of Energy Title: Carbon Research Center Project, Draft Environmental Assessment (DOE/EA- 1616) Location: Southern Company Services' Power Systems Development Facility near Wilsonville, Alabama Contact: For further information about this Environmental Assessment, contact: Roy Spears, Document Manager National Energy Technology Laboratory

439

Large-Scale Offshore Wind Power in the United States: Assessment of Opportunities and Barriers, NREL (National Renewable Energy Laboratory)  

NLE Websites -- All DOE Office Websites (Extended Search)

ASSESSMENT OF ASSESSMENT OF OPPORTUNITIES AND BARRIERS September 2010 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or

440

Achieving negative emissions with BECCS (bioenergy with carbon capture and storage) in the power sector: New insights from the TIAM-FR (TIMES Integrated Assessment Model France) model  

Science Journals Connector (OSTI)

Abstract It seems increasingly likely that atmospheric greenhouse gas concentration will overshoot the recommended 450ppm CO2 equivalent target. Therefore, it may become necessary to use BECCS (bioenergy with carbon capture and storage) technologiesto remove CO2 from the atmosphere. This technique is gaining increasing attention as it offers the dual benefit of providing low-carbon energy products and leading to negative CO2 emissions. This study evaluates the possible deployment of BECCS in the power sector using the bottom-up multiregional optimization model TIAM-FR (TIMES Integrated Assessment Model France). Under two climate scenarios, a regional analysis is conducted to discuss where the technology will be developed. The impact of the unavailability of this technology on the structure of the electricity mix and the cost of the energy system completes the analysis. In line with literature, the results suggest that BECCS technology offers an environmentally and economically viable option to achieve stringent targets. The regional analysis shows that industrialized countries will develop CCS (carbon capture and storage) mainly on biomass power plants while CCS on fossil fuel power plants will be widely deployed in China. With a specific constraint on CCS diffusion, the share of renewables and nuclear energy becomes significant to meet the climate targets.

Sandrine Selosse; Olivia Ricci

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

How to quantify uncertainty and variability in life cycle assessment: the case of greenhouse gas emissions of gas power generation in the US  

Science Journals Connector (OSTI)

This study quantified the contributions of uncertainty and variability to the range of life-cycle greenhouse gas (LCGHG) emissions associated with conventional gas-fired electricity generation in the US. Whereas uncertainty is defined as lack of knowledge and can potentially be reduced by additional research, variability is an inherent characteristic of supply chains and cannot be reduced without physically modifying the system. The life-cycle included four stages: production, processing, transmission and power generation, and utilized a functional unit of 1 kWh of electricity generated at plant. Technological variability requires analyses of life cycles of individual power plants, e.g. combined cycle plants or boilers. Parameter uncertainty was modeled via Monte Carlo simulation. Our approach reveals that technological differences are the predominant cause for the range of LCGHG emissions associated with gas power, primarily due to variability in plant efficiencies. Uncertainties in model parameters played a minor role for 100 year time horizon. Variability in LCGHG emissions was a factor of 1.4 for combined cycle plants, and a factor of 1.3 for simple cycle plants (95% CI, 100 year horizon). The results can be used to assist decision-makers in assessing factors that contribute to LCGHG emissions despite uncertainties in parameters employed to estimate those emissions.

M Hauck; Z J N Steinmann; I J Laurenzi; R Karuppiah; M A J Huijbregts

2014-01-01T23:59:59.000Z

442

An integrated assessment of the energy savings and emissions-reduction potential of combined heat and power  

SciTech Connect

Combined Heat and Power (CHP) systems, or cogeneration systems, generated electrical/mechanical and thermal energy simultaneously, recovering much of the energy normally lost in separate generation. This recovered energy can be used for heating or cooling purposes, eliminating the need for a separate boiler. Significant reductions in energy, criteria pollutants, and carbon emissions can be achieved from the improved efficiency of fuel use. Generating electricity on or near the point of use also avoids transmission and distribution losses and defers expansion of the electricity transmission grid. Several recent developments make dramatic expansion of CHP a cost-effective possibility over the next decade. First, advances in technologies such as combustion turbines, steam turbines, reciprocating engines, fuel cells. and heat-recovery equipment have decreased the cost and improved the performance of CHP systems. Second, a significant portion of the nation's boiler stock will need to be replaced in the next decade, creating an opportunity to upgrade this equipment with clean and efficient CHP systems. Third, environmental policies, including addressing concerns about greenhouse gas emissions, have created pressures to find cleaner and more efficient means of using energy. Finally, electric power market restructuring is creating new opportunities for innovations in power generation and smaller-scale distributed systems such as CHP. The integrated analysis suggests that there is enormous potential for the installation of cost-effective CHP in the industrial, district energy, and buildings sectors. The projected additional capacity by 2010 is 73 GW with corresponding energy savings of 2.6 quadrillion Btus, carbon emissions reductions of 74 million metric tons, 1.4 million tons of avoided SO{sub 2} emissions, and 0.6 million tons of avoided NO{sub x} emissions. The authors estimate that this new CHP would require cumulative capital investments of roughly $47 billion over ten years.

Kaarsberg, T.M.; Elliott, R.N.; Spurr, M.

1999-07-01T23:59:59.000Z

443

Recommended values for the distribution coefficient (Kd) to be used in dose assessments for decommissioning the Zion Nuclear Power Plant  

SciTech Connect

ZionSolutions is in the process of decommissioning the Zion Nuclear Power Plant. The site contains two reactor Containment Buildings, a Fuel Building, an Auxiliary Building, and a Turbine Building that may be contaminated. The current decommissioning plan involves removing all above grade structures to a depth of 3 feet below grade. The remaining underground structures will be backfilled. The remaining underground structures will contain low amounts of residual licensed radioactive material. An important component of the decommissioning process is the demonstration that any remaining activity will not cause a hypothetical individual to receive a dose in excess of 25 mrem/y as specified in 10CFR20 SubpartE.

Sullivan T.

2014-06-09T23:59:59.000Z

444

A research needs assessment for the capture, utilization and disposal of carbon dioxide from fossil fuel-fired power plants. Volume 1, Executive summary: Final report  

SciTech Connect

This study identifies and assesses system approaches in order to prioritize research needs for the capture and non-atmospheric sequestering of a significant portion of the carbon dioxide (CO{sub 2}) emitted from fossil fuel-fired electric power plants (US power plants presently produce about 7% of the world`s CO{sub 2} emissions). The study considers capture technologies applicable either to existing plants or to those that optimistically might be demonstrated on a commercial scale over the next twenty years. Specific conclusions are as follows: (1) To implement CO{sub 2} capture and sequestration on a national scale will decrease power plant net efficiencies and significantly increase the cost of electricity. To make responsible societal decisions, accurate and consistent economic and environmental analysis of all alternatives for atmospheric CO{sub 2} mitigation are required. (2) Commercial CO{sub 2} capture technology, though expensive and energy intensive, exists today. (3) The most promising approach to more economical CO{sub 2} capture is to develop power plant systems that facilitate efficient CO{sub 2} capture. (4) While CO{sub 2} disposal in depleted oil and gas reservoirs is feasible today, the ability to dispose of large quantities Of CO{sub 2} is highly uncertain because of both technical and institutional issues. Disposal into the deep ocean or confined aquifers offers the potential for large quantity disposal, but there are technical, safety, liability, and environmental issues to resolve. Therefore, the highest priority research should focus on establishing the feasibility of large scale disposal options.

Not Available

1993-07-01T23:59:59.000Z

445

EPRI steam turbine and generator NDE, life assessment, and maintenance workshop. [Electric Power Research Institute (EPRI), NonDestructive Evaluation (NDE)  

SciTech Connect

On July 16--19, 1991, the EPRI NDE Center hosted the second EPRI Steam Turbine and Generator NDE, Life Assessment and Maintenance Workshop. This workshop was co-sponsored by the Nuclear Power and the Generation and Storage Divisions of EPRI. Attendees represented all sectors of the industry including utilities, equipment manufacturers, forging suppliers, service organizations, government organizations, insurancecarriers, and consultants from the United States and abroad. Domestic utility presence was again strong, with 105 representatives from 44 utilities in attendance. Australia, Canada, England, Finland, France, Germany, Italy, Japan, Korea, New Zealand, Spain, Sweden and Switzerland were represented in the international contingent. A key and integral part of the workshop was a vendor equipment fair, in which some 23 organizations displayed and demonstrated equipment and services that they offer. Formal presentation of 53 technical papers made up the technical portion of the agenda, which also included two breakout discussion sessions on topical subjects. To provide optimum opportunity for participants to hear all presentations on closely related topics, the sessions were set such that a NDE session ran parallel to the life assessment session. The first NDE session included turbine related topics while the first life assessment session addressed generator issues. The last sessions of the workshop were just reversed with turbine topics being addressed in the life assessment session while generator issues were presented in the NDE session. Presentations on maintenance topics and on monitoring and diagnostics topics were also presented in parallel sessions. These proceedings contain the texts of the papers presented at the workshop. Individual papers in indexed separately.

Nottingham, L.D.; Sabourin, P.F.

1992-10-01T23:59:59.000Z

446

ASSESSMENT OF THE RADIONUCLIDE COMPOSITION OF "HOT PARTICLES" SAMPLED IN THE CHERNOBYL NUCLEAR POWER PLANT FOURTH REACTOR UNIT  

SciTech Connect

Fuel-containing materials sampled from within the Chernobyl Nuclear Power Plant (ChNPP) 4th Reactor Unit Confinement Shelter were spectroscopically studied for gamma and alpha content. Isotopic ratios for cesium, europium, plutonium, americium, and curium were identified and the fuel burnup in these samples was determined. A systematic deviation in the burnup values based on the cesium isotopes, in comparison with other radionuclides, was observed. The conducted studies were the first ever performed to demonstrate the presence of significant quantities of {sup 242}Cm and {sup 243}Cm. It was determined that there was a systematic underestimation of activities of transuranic radionuclides in fuel samples from inside of the ChNPP Confinement Shelter, starting from {sup 241}Am (and going higher), in comparison with the theoretical calculations.

Farfan, E.; Jannik, T.; Marra, J.

2011-10-01T23:59:59.000Z

447

Methodology to assess potential glint and glare hazards from concentrating solar power plants : analytical models and experimental validation.  

SciTech Connect

With growing numbers of concentrating solar power systems being designed and developed, glint and glare from concentrating solar collectors and receivers is receiving increased attention as a potential hazard or distraction for motorists, pilots, and pedestrians. This paper provides analytical methods to evaluate the irradiance originating from specularly and diffusely reflecting sources as a function of distance and characteristics of the source. Sample problems are provided for both specular and diffuse sources, and validation of the models is performed via testing. In addition, a summary of safety metrics is compiled from the literature to evaluate the potential hazards of calculated irradiances from glint and glare. Previous safety metrics have focused on prevention of permanent eye damage (e.g., retinal burn). New metrics used in this paper account for temporary flash blindness, which can occur at irradiance values several orders of magnitude lower than the irradiance values required for irreversible eye damage.

Diver, Richard B., Jr.; Ghanbari, Cheryl M.; Ho, Clifford Kuofei

2010-04-01T23:59:59.000Z

448

Environmental Assessment for Authorizing the Puerto Rico Electric Power Authority (PREPA) to allow Public Access to the Boiling Nuclear Superheat (BONUS) Reactor Building, Ricon, Puerto Rico  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

394: Public Access to the BONUS Facility January 2003 394: Public Access to the BONUS Facility January 2003 i DOE/EA-1394 ENVIRONMENTAL ASSESSMENT FOR AUTHORIZING THE PUERTO RICO ELECTRIC POWER AUTHORITY (PREPA) TO ALLOW PUBLIC ACCESS TO THE BOILING NUCLEAR SUPERHEAT (BONUS) REACTOR BUILDING, RINCÓN, PUERTO RICO January 2003 U.S. Department of Energy Oak Ridge Operations Office Oak Ridge, Tennessee DOE/EA-1394: Public Access to the BONUS Facility January 2003 ii TABLE OF CONTENTS LIST OF FIGURES V LIST OF TABLES V ACRONYMS VI UNIT ABBREVIATIONS VII SUMMARY VIII 1. INTRODUCTION 10 1.1 Purpose and Need for Action 10 1.2 Operational and Decommissioning History 15 1.3 Summary of Radiological Conditions at the BONUS Facility 19 2. DESCRIPTION OF THE PROPOSED ACTION AND ALTERNATIVES 25

449

Petri Net Modeling for Probabilistic Safety Assessment and its Application in the Air Lock System of a CANDU Nuclear Power Plant  

Science Journals Connector (OSTI)

Historically, fault trees are extensively used in Probabilistic Safety Assessment (PSA) to model and evaluate the probability and consequence of failures of complex engineering systems, such as nuclear power plants. Scenarios of hypothetical accidents resulting in severe core damage can be developed. Petri net is another modeling technique that offers many advantages when comparing with fault trees, such as is ability to represent the time sequence of the events along with their duration. In this research, Petri net theory is extended to model system failures. The transformations required to model logic gates by Petri nets are explored and examples provided. Methods for qualitative analysis for Petri nets are presented. The application of Petri net in the airlock system of a Canada Deuterium Uranium (CANDU) reactor is explored. It is further demonstrated that Petri net can be used in both coherent and non-coherent systems.

Andrew Lee; Lixuan Lu

2012-01-01T23:59:59.000Z

450

Technical and Political Assessment of Peaceful Nuclear Power Program Prospects in North Africa and the Middle East  

SciTech Connect

An exceptional number of Middle Eastern and North African nations have recently expressed interest in developing nuclear energy for peaceful purposes. Many of these countries have explored nuclear research in limited ways in the past, but the current focused interest and application of resources towards developing nuclear-generated electricity and nuclear-powered desalination plants is unprecedented. Consequently, questions arise in response to this emerging trend: What instigated this interest? To what end(s) will a nuclear program be applied? Does the country have adequate technical, political, legislative, nonproliferation, and safety infrastructure required for the capability desired? If so, what are the next steps for a country in preparation for a future nuclear program? And if not, what collaboration efforts are possible with the United States or others? This report provides information on the capabilities and interests of 13 countries in the region in nuclear energy programs in light of safety, nonproliferation and security concerns. It also provides information useful for determining potential for offering technical collaboration, financial aid, and/or political support.

Windsor, Lindsay K.; Kessler, Carol E.

2007-09-11T23:59:59.000Z

451

Assessment of the impacts on health due to the emissions of Cuban power plants that use fossil fuel oils with high content of sulfur. Estimation of external costs  

Science Journals Connector (OSTI)

Fossil fuel electricity generation has been demonstrated to be a main source of atmospheric pollution. The necessity of finding out a balance between the costs of achieving a lower level of environmental and health injury and the benefits of providing electricity at a reasonable cost have lead to the process of estimating the external costs derived from these impacts and not included in the electricity prices as a quantitative measure of it that, even when there are large uncertainties involved, can be used by decision makers in the process of achieving a global sustainable development. The external costs of the electricity generation in three Cuban power plants that use fossil fuel oils with high sulfur content have been assessed. With that purpose a specific implementation of the Impact Pathways Methodology for atmospheric emissions was developed. Dispersion of atmospheric pollutants is modeled at local and regional scales in a detailed way. Health impacts include mortality and those morbidity effects that showed relation with the increment of selected pollutant concentration in national studies. The external cost assessed for the three plants was 40,588,309USDyr?1 (min./max.: 10,194,833/169,013,252), representing 1.06USDCentkWh?1. Costs derived from sulfur species (SO2 and sulfate aerosol) stand for 93% of the total costs.

L. Turts Carbonell; E. Meneses Ruiz; M. Snchez Gcita; J. Rivero Oliva; N. Daz Rivero

2007-01-01T23:59:59.000Z

452

We will present an overview of Oak Ridge Bio-surveillance Toolkit (ORBiT), which we have developed specifically to address data analytic challenges in the realm of public health surveillance. The digitization of health related information  

E-Print Network (OSTI)

We will present an overview of Oak Ridge Bio-surveillance Toolkit (ORBiT), which we have developed research scientist in the Computational Data Analytics Group at the Oak Ridge National Labor- atory. Her and machine learning systems, and R&D of ORBiT, the Oak Ridge Biosurveillance Toolkit. Prior to joining ORNL

Mukherjee, Amar

453

Hydropower Resource Assessment and Characterization | Department...  

Energy Savers (EERE)

Assessment and Characterization Hydropower Resource Assessment and Characterization The Water Power Program has released reports and maps that assess the total technically...

454

Pumping System Assessment Tool Overview  

Energy.gov (U.S. Department of Energy (DOE))

This power point presentation provides an overview of AMO's pumping system assessment tool (PSAT) that is used during energy savings assessments at large industrial facilities.

455

PowerPoint Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Architectures for Scalable Analytics OLCF Compute Resources 5 2014 Joint User Forum on Data Intensive Computing Three Analytical-Support Toolkits * Still in R&D stage (Use-cases...

456

Tracking the Reliability of the U.S. Electric Power System: An Assessment of Publicly Available Information Reported to State Public Utility Commissions  

E-Print Network (OSTI)

Use Guide for Power Distribution Reliability Indices. ISBN#Engineers (IEEE) Distribution Reliability Working Group,for Electric Power Distribution Reliability Indices, which

LaCommare, Kristina H.

2008-01-01T23:59:59.000Z

457

Final Assessment of Manual Ultrasonic Examinations Applied to Detect Flaws in Primary System Dissimilar Metal Welds at North Anna Power Station  

SciTech Connect

PNNL conducted a technical assessment of the NDE issues and protocols that led to missed detections of several axially oriented flaws in a steam generator primary inlet dissimilar metal weld at North Anna Power Station, Unit 1 (NAPS-1). This particular component design exhibits a significant outside-diameter (OD) taper that is not included as a blind performance demonstration mock-up within the industrys Performance Demonstration Initiative, administered by EPRI. For this reason, the licensee engaged EPRI to assist in the development of a technical justification to support the basis for a site-specific qualification. The service-induced flaws at NAPS-1 were eventually detected as a result of OD surface machining in preparation for a full structural weld overlay. The machining operation uncovered the existence of two through-wall flaws, based on the observance of primary water leaking from the dissimilar metal weld. A total of five axially oriented flaws were detected in varied locations around the weld circumference. The field volumetric examination that was conducted at NAPS-1 was a non-encoded, real-time manual ultrasonic examination. PNNL conducted both an initial assessment, and subsequently, a more rigorous technical evaluation (reported here), which has identified an array of NDE issues that may have led to the subject missed detections. These evaluations were performed through technical reviews and discussions with NRC staff, EPRI NDE Center personnel, industry and ISI vendor personnel, and ultrasonic transducer manufacturers, and laboratory tests, to better understand the underlying issues at North Anna.

Anderson, Michael T.; Diaz, Aaron A.; Cinson, Anthony D.; Crawford, Susan L.; Prowant, Matthew S.; Doctor, Steven R.

2014-03-24T23:59:59.000Z

458

Low Carbon Development Planning in the Power Sector | Open Energy  

Open Energy Info (EERE)

the Power Sector the Power Sector Jump to: navigation, search Logo: Low Carbon Development Planning in the Power Sector Name Low Carbon Development Planning in the Power Sector Agency/Company /Organization Energy Sector Management Assistance Program of the World Bank Sector Energy Topics Low emission development planning Website http://www.esmap.org/esmap/nod Country Morocco, Nigeria UN Region Northern Africa References ESMAP[1] Overview "This new program was initiated in 2010 and aims to provide clients with analytical support to develop capacity for low-carbon development in power sector planning. It employs a learning-by doing approach with pilot activities in two countries in the initial stage (Nigeria and Morocco - 2010-12). A toolkit will be developed at the end of the pilot program to

459

RADIATION DOSE ASSESSMENT FOR THE BIOTA OF TERRESTRIAL ECOSYSTEMS IN THE SHORELINE ZONE OF THE CHERNOBYL NUCLEAR POWER PLANT COOLING POND  

SciTech Connect

Radiation exposure of the biota in the shoreline area of the Chernobyl Nuclear Power Plant Cooling Pond was assessed to evaluate radiological consequences from the decommissioning of the Cooling Pond. The article addresses studies of radioactive contamination of the terrestrial faunal complex and radionuclide concentration ratios in bodies of small birds, small mammals, amphibians, and reptiles living in the area. The data were used to calculate doses to biota using the ERICA Tool software. Doses from {sup 90}Sr and {sup 137}Cs were calculated using the default parameters of the ERICA Tool and were shown to be consistent with biota doses calculated from the field data. However, the ERICA dose calculations for plutonium isotopes were much higher (2-5 times for small mammals and 10-14 times for birds) than the doses calculated using the experimental data. Currently, the total doses for the terrestrial biota do not exceed maximum recommended levels. However, if the Cooling Pond is allowed to drawdown naturally and the contaminants of the bottom sediments are exposed and enter the biological cycle, the calculated doses to biota may exceed the maximum recommended values. The study is important in establishing the current exposure conditions such that a baseline exists from which changes can be documented following the lowering of the reservoir water. Additionally, the study provided useful radioecological data on biota concentration ratios for some species that are poorly represented in the literature.

Farfan, E.; Jannik, T.

2011-10-01T23:59:59.000Z

460

Florida Conference on Recent Advances in Robotics, FCRAR 2009 -Boca Raton, Florida, May 21-22, 2009 1 RSARSim: A Toolkit for Evaluating  

E-Print Network (OSTI)

Florida Conference on Recent Advances in Robotics, FCRAR 2009 - Boca Raton, Florida, May 21-22, 2009 1 RSARSim: A Toolkit for Evaluating HRI in Robotic Search and Rescue Tasks Bennie Lewis and Gita 32816-2362 BennieLewis@knights.ucf.edu, gitars@eecs.ucf.edu ABSTRACT A well-designed human-robot

Sukthankar, Gita Reese

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Power Plant Power Plant  

E-Print Network (OSTI)

Basin Center for Geothermal Energy at University of Nevada, Reno (UNR) 2 Nevada Geodetic LaboratoryStillwater Power Plant Wabuska Power Plant Casa Diablo Power Plant Glass Mountain Geothermal Area Lassen Geothermal Area Coso Hot Springs Power Plants Lake City Geothermal Area Thermo Geothermal Area

Tingley, Joseph V.

462

EA-1931: Draft Environmental Assessment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Assessment EA-1931: Draft Environmental Assessment Keeler to Tillamook Transmission Line Rebuild, Washington and Tillamook Counties, Oregon Bonneville Power...

463

Power Factor Reactive Power  

E-Print Network (OSTI)

power: 130 watts Induction motor PSERC Incandescent lights 0 0.002 0.004 0.006 0.008 0.01 0.012 0.014 0 power: 150 watts #12;Page 4 PSERC Incandescent Lights PSERC Induction motor with no load #12;Page 5 Incandescent Lights #12;Page 7 PSERC Incandescent lights power: Power = 118 V x 1.3 A = 153 W = 0.15 kW = power

464

A Citation-Based Assessment Of The Performance Of U.S. Boiling Water Reactors Following Extended Power Up-Rates.  

E-Print Network (OSTI)

??Nuclear power plants produce 20 percent of the electricity generated in the U.S. Nuclear generated electricity is increasingly valuable to a utility because it can (more)

Heidrich, Brenden

2012-01-01T23:59:59.000Z

465

Assessment of least-cost pathways for decarbonising Europe's power supply : a model-based long-term scenario analysis accounting for the characteristics of renewable energies.  

E-Print Network (OSTI)

??This work analyses technological least-cost pathways for deep emission reductions in the European power sector. It seeks a better understanding of the role renewable energies (more)

Pfluger, Benjamin

2013-01-01T23:59:59.000Z

466

Characterization of the Solar Power Resource in Europe and  

E-Print Network (OSTI)

;1 Characterization of the Solar Power Resource in Europe and Assessing Benefits of Co-Location with Wind Power Europe from a companion assessment, we assess the benefits of co-location of solar and wind powerCharacterization of the Solar Power Resource in Europe and Assessing Benefits of Co

467

Sandia National Laboratories: Tidal Energy Resource Assessment...  

NLE Websites -- All DOE Office Websites (Extended Search)

of current speed * temporal variation of power density * temporal variation of turbulence intensity * tidal energy resource assessment * Verdant Power Inc. Comments are closed....

468

Bureau of Land Management's Environmental Assessment | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Management's Environmental Assessment - T G Power LLC Hot Sulphur Springs Transmission Line, 120 kV Electric Power Line, Northern Independence Valley, Elko County, Nevada Bureau...

469

Marine and Hydrokinetic Resource Assessment and Characterization...  

Energy Savers (EERE)

Characterization Marine and Hydrokinetic Resource Assessment and Characterization The Water Power Program has released reports and maps that assess the resource potential of the...

470

Assessment of Demand Response Resource  

E-Print Network (OSTI)

Assessment of Demand Response Resource Potentials for PGE and Pacific Power Prepared for: Portland January 15, 2004 K:\\Projects\\2003-53 (PGE,PC) Assess Demand Response\\Report\\Revised Report_011504.doc #12;#12;quantec Assessment of Demand Response Resource Potentials for I-1 PGE and Pacific Power I. Introduction

471

226Ra, 232Th and 40K radionuclides enhancement rate and dose assessment for residues of lignite-fired thermal power plants in Turkey  

Science Journals Connector (OSTI)

......found in residues resulting from coal combustion in thermal power plants can widely depend on mineral ingredients of coal. Coal and ash activity concentrations...Radium 7440-29-1 Thorium | Coal Ash chemistry Environmental Exposure analysis......

A. Parmaksiz; P. Arikan; M. Vural; E. Yeltepe; I. Tkenmez

2011-11-01T23:59:59.000Z

472

The Application of Risk-Based Cost-Benefit Analysis in the Assessment of Acceptable Public Safety for Nuclear Power Plants  

Science Journals Connector (OSTI)

In 1982, the U.S. Nuclear Regulatory Commission issued, for public comment, proposed safety goals for commercial nuclear power plants. In an effort to quantitatively evaluate these proposed goals, a methodolog...

Thomas A. Morgan; Alfred J. Unione; George Sauter

1985-01-01T23:59:59.000Z

473

Land suitability assessment for wind power plant site selection using ANP-DEMATEL in a GIS environment: case study of Ardabil province, Iran  

Science Journals Connector (OSTI)

Wind energy is a renewable energy resource that ... . Site selection for the establishment of large wind turbines, called wind farms, like any other engineering project, ... . This study assessed the possibility ...

Ali Azizi; Bahram Malekmohammadi

2014-10-01T23:59:59.000Z

474

ResGrid: A Grid-Aware Toolkit for Reservoir Uncertainty Analysis  

E-Print Network (OSTI)

,000 oil producing wells, around 4K offshore. Reservoir Studies · Assessments and predictions of oil/gas oil, water or gas. · Many geological parameters cannot be measured or modeled and are unknowns. · We ­ Drilling performance analysis with high-rate data "UCOMS" #12;Oil Industry in Louisiana · Major oil

Allen, Gabrielle

475

Risk and uncertainty assessment in the development of strategy for forming the potential of dispatchable generation in the national power system of Ukraine  

Science Journals Connector (OSTI)

An inefficient generation and distribution infrastructure is a serious problem for the national power system of Ukraine. This situation makes it necessary to propose a radical new approach for developing a strategy to meet the demand for dispatchable power generation. Proposed options include: traditional centralised generation, decentralised and alternative energy sources, and use of so-called manoeuvrable loads, such as electrical heating systems. This paper describes an approach based on game theory and elements of fuzzy set theory to solve the problem, taking into account uncertainty of information and the multicriteria character of the problem.

A.V. Prakhovnik; V.A. Popov; V.F. Nakhodov

2010-01-01T23:59:59.000Z

476

Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle description  

SciTech Connect

The Nonproliferation Alterntive Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates.

Not Available

1980-06-01T23:59:59.000Z

477

ORISE: Dose modeling and assessments  

NLE Websites -- All DOE Office Websites (Extended Search)

have participated include: Derivation of DCGLs for the Curtis Bay and Hammond depots Vermont Yankee Nuclear Power Station dose assessment study Radium timepiece dose modeling...

478

Reviewing electricity generation cost assessments.  

E-Print Network (OSTI)

?? Studies assessing the electricity generation cost of various power generating technologies are becoming increasingly common and references to such studies can often be heard (more)

Larsson, Simon

2012-01-01T23:59:59.000Z

479

Making Africa's Power Sector Sustainable: An Analysis of Power Sector  

Open Energy Info (EERE)

Making Africa's Power Sector Sustainable: An Analysis of Power Sector Making Africa's Power Sector Sustainable: An Analysis of Power Sector Reforms in Africa Jump to: navigation, search Tool Summary Name: Making Africa's Power Sector Sustainable: An Analysis of Power Sector Reforms in Africa Agency/Company /Organization: United Nations Environment Programme, United Nations Economic Commission for Africa Sector: Energy Topics: Market analysis, Policies/deployment programs, Co-benefits assessment, - Energy Access, - Environmental and Biodiversity Resource Type: Guide/manual, Lessons learned/best practices Website: www.uneca.org/eca_programmes/nrid/pubs/powersectorreport.pdf UN Region: Eastern Africa References: Making Africa's Power Sector Sustainable: An Analysis of Power Sector Reforms in Africa[1] Overview "This study assesses the socio-economic and environmental impacts of power

480

DYNAMIC MODELLING OF AUTONOMOUS POWER SYSTEMS INCLUDING RENEWABLE POWER SOURCES.  

E-Print Network (OSTI)

(thermal, gas, diesel) and renewable (hydro, wind) power units. The objective is to assess the impact - that have a special dynamic behaviour, and the wind turbines. Detailed models for each one of the power system components are developed. Emphasis is given in the representation of different hydro power plant

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "assessment toolkit power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

DOE/EA-1503: Finding of No Significant Impact for the Vermont Electric Power Company Proposed Northern Loop Project Environmental Assessment (01/21/04)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Vermont Electric Power Company Vermont Electric Power Company FE Dockets PP-66-2 and PP-82-3 Background Under Executive Order (EO) 10485, as amended by EO 12038, no person may construct, operate, maintain, or connect facilities at the international border of the United States for the transmission of electric energy between the United States and a foreign country without first obtaining a Presidential permit from the Department of Energy (DOE). On June 21, 1979, DOE issued Presidential Permit PP-66 to Citizens Utilities Company (now Citizens Communications Company; "Citizens") for one 120,000-volt (120-kV) electric transmission line that crosses the United States border with Canada near Derby Line, Vermont, and interconnects with similar transmission facilities in Canada owned by Hydro-Quebec.

482

Techno-economic assessment of substituting natural gas based heater with thermal energy storage system in parabolic trough concentrated solar power plant  

Science Journals Connector (OSTI)

Abstract Parabolic-trough (PT) concentrated solar power (CSP) plants are very vulnerable to daily fluctuations in solar radiation. This dependence can be mitigated through a hybridization of solar energy with natural gas based heaters that supply thermal energy during the night or whenever solar irradiance level is dimmed. However, there is more sustainable way for CSP plants to avoid power-generation-outages caused by transient weather conditions, i.e. installation of thermal energy storage (TES). Such a system stores surplus thermal energy provided by solar field during sunny hours and discharges it when the sun is not available. Shams-1PT plant in Madinat-Zayed, United-Arab-Emirates (UAE) has two natural gas based components, i.e. steam-booster heater and heat transfer fluid (HTF) heater. In the current study, model of Shams-1 was developed and analyzed in the System Advisor Model (SAM) software. It has been attempted to replace the HTF heater with TES. A parametric study has been conducted to determine the size of the TES as well as the solar field such that the specified power target demand would be satisfied. The results of the parametric analysis showed that TES can't completely replace the HTF heater, within reasonable sizes. Nevertheless, consequent simulations depicts that TES increases the capacity factor on one hand and decreases fuel consumption on the other hand.

V. Poghosyan; Mohamed I. Hassan

2015-01-01T23:59:59.000Z