Sample records for assessment rating tool

  1. Commercial Building Energy Asset Rating Tool User's Guide

    SciTech Connect (OSTI)

    Wang, Na; Makhmalbaf, Atefe; Matsumoto, Steven W.

    2012-05-01T23:59:59.000Z

    The U.S. Department of Energy抯 Commercial Building Energy Asset Rating Tool is a web-based system that is designed to allow building owners, managers, and operators to more accurately assess the energy performance of their commercial buildings. This document provide a step-by-step instruction on how to use the tool.

  2. NAQSAT National Air Quality Site Assessment Tool NAQSAT National Air Quality Site Assessment Tool

    E-Print Network [OSTI]

    NAQSAT National Air Quality Site Assessment Tool NAQSAT National Air Quality Site Assessment Tool Air Quality Assessment Tool For Livestock Producers & Advisors #12;NAQSAT The National Air Quality Site Assessment Tool (NAQSAT) was developed for livestock producers and their advisors interested

  3. Commercial Motor Vehicle Brake Assessment Tools

    E-Print Network [OSTI]

    Commercial Motor Vehicle Brake Assessment Tools Commercial Motor Vehicle Roadside Technology to deceleration in g's 颅 Passing score: BE43.5 路 Enforcement tool for only 3 years. 路 Based solely on brake Brake Research 路 CMVRTC research built on these enforcement tools 颅 Correlation Study 颅 Level-1 / PBBT

  4. Supplier Management Self-Assessment Tool

    E-Print Network [OSTI]

    Lean Advancement Initiative

    This tool represents a framework that companies can utilize to conduct a self-assessment of how much progress they have made in developing lean supply chain management capabilities. In addition, it can be used to establish ...

  5. Field Assessment of Energy Audit Tools for Retrofit Programs

    SciTech Connect (OSTI)

    Edwards, J.; Bohac, D.; Nelson, C.; Smith, I.

    2013-07-01T23:59:59.000Z

    This project focused on the use of home energy ratings as a tool to promote energy retrofits in existing homes. A home energy rating provides a quantitative appraisal of a home's asset performance, usually compared to a benchmark such as the average energy use of similar homes in the same region. Home rating systems can help motivate homeowners in several ways. Ratings can clearly communicate a home's achievable energy efficiency potential, provide a quantitative assessment of energy savings after retrofits are completed, and show homeowners how they rate compared to their neighbors, thus creating an incentive to conform to a social standard. An important consideration is how rating tools for the retrofit market will integrate with existing home energy service programs. For residential programs that target energy savings only, home visits should be focused on key efficiency measures for that home. In order to gain wide adoption, a rating tool must be easily integrated into the field process, demonstrate consistency and reasonable accuracy to earn the trust of home energy technicians, and have a low monetary cost and time hurdle for homeowners. Along with the Home Energy Score, this project also evaluated the energy modeling performance of SIMPLE and REM/Rate.

  6. Adapting the Lean Enterprise Self Assessment Tool for health care

    E-Print Network [OSTI]

    Hernandez, Cynthia Lynn

    2010-01-01T23:59:59.000Z

    The Lean Enterprise Self Assessment Tool (LESAT) is a product of the Lean Advancement Initiative (LAI) and the Massachusetts Institute of Technology. This tool has been applied by many organizations to gage their progress ...

  7. Life cycle assessment: A stewardship tool

    SciTech Connect (OSTI)

    Not Available

    1992-12-09T23:59:59.000Z

    As the chemical industry searches for tools to practice product stewardship. it is getting more involved in life cycle assessment (LCA) techniques, which examine the full environmental impact of a product or process over its lifetime and identify areas for improvement. The industry views LCA as a component of product stewardship,' says James P. Mieure, Monsanto's product safety director/chemicals group, who is the liaison between the Chemical manufacturers Association's (CMA; Washington) LCA and product stewardship work groups. Product stewardship includes examining energy used and waste produced as key parameters to consider when developing a new product or process or in modifying an existing one, Mieure says, which is part of what an LCA does. The work being done by the LCA group at CMA, cautions Mieure, doesn't lend itself to practical applications. The group hopes to help companies implement LCA when the time is right, he says. The time is not right yet, Mieure adds, mostly because of the slowness with which the impact analysis stage is progressing. Although the LCA concept has been around for more than 20 years, activity in applying it in industry has taken off since 1990.

  8. D&D and Risk Assessment Tools

    Office of Environmental Management (EM)

    compares radionuclides of concern and survey media to detector capabilities. With input data on radionuclides of concern, the tool recommends radiation detectors that have the...

  9. Evaluation of Sediment Toxicity Using a Suite of Assessment Tools

    E-Print Network [OSTI]

    Kelley, Matthew A

    2010-01-15T23:59:59.000Z

    Accurate characterization of risk of adverse ecological effects related to contaminated sediment presents a particularly difficult challenge. A series of studies has been conducted to investigate the utility of various tools for assessment...

  10. Requirements for Product Development Self-Assessment Tools

    E-Print Network [OSTI]

    Knoblinger, Christoph

    The successful execution of complex PD projects still poses major challenges for companies. One approach companies can use to improve their performance is self-assessment tools to optimize their organization and processes. ...

  11. Development of quantitative tools for assessment of cerebellar dysfunction

    E-Print Network [OSTI]

    Garg, Aditi

    2005-01-01T23:59:59.000Z

    Two tools for the quantitative assessment of cerebellar dysfunction are developed and explored. One is based on a battery of laptop tests desgined for clinical use. Extensive analysis of one of the tests using a speed/accuracy ...

  12. ORISE Resources: Community Assessment Tool for the CDC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Activity (HPA). The CAT is a tool that communities can use to assess their total health care readiness for a disaster-not just hospitals, but the entire health care...

  13. Computational Tools to Assess Turbine Biological Performance

    SciTech Connect (OSTI)

    Richmond, Marshall C.; Serkowski, John A.; Rakowski, Cynthia L.; Strickler, Brad; Weisbeck, Molly; Dotson, Curtis L.

    2014-07-24T23:59:59.000Z

    Public Utility District No. 2 of Grant County (GCPUD) operates the Priest Rapids Dam (PRD), a hydroelectric facility on the Columbia River in Washington State. The dam contains 10 Kaplan-type turbine units that are now more than 50 years old. Plans are underway to refit these aging turbines with new runners. The Columbia River at PRD is a migratory pathway for several species of juvenile and adult salmonids, so passage of fish through the dam is a major consideration when upgrading the turbines. In this paper, a method for turbine biological performance assessment (BioPA) is demonstrated. Using this method, a suite of biological performance indicators is computed based on simulated data from a CFD model of a proposed turbine design. Each performance indicator is a measure of the probability of exposure to a certain dose of an injury mechanism. Using known relationships between the dose of an injury mechanism and frequency of injury (dose杛esponse) from laboratory or field studies, the likelihood of fish injury for a turbine design can be computed from the performance indicator. By comparing the values of the indicators from proposed designs, the engineer can identify the more-promising alternatives. We present an application of the BioPA method for baseline risk assessment calculations for the existing Kaplan turbines at PRD that will be used as the minimum biological performance that a proposed new design must achieve.

  14. An Evaluation of Cybersecurity Assessment Tools on a SCADA Environment

    E-Print Network [OSTI]

    Manimaran, Govindarasu

    An Evaluation of Cybersecurity Assessment Tools on a SCADA Environment Adam Hahn Department Email: gmani@iastate.edu Abstract--Increased concerns for electric grid cybersecurity has lead commonly used for traditional information technology (IT) systems are sufficient to meet the cybersecurity

  15. Survey of tools for risk assessment of cascading outages

    SciTech Connect (OSTI)

    Papic, Milorad; Bell, Keith; Chen, Yousu; Dobson, Ian; Fonte, Louis; Haq, Enamul; Hines, Paul; Kirschen, Daniel; Luo, Xiaochuan; Miller, Stephen; Samaan, Nader A.; Vaiman, Marianna; Varghese, Matthew; Zhang, Pei

    2011-10-01T23:59:59.000Z

    Abstract-This paper is a result of ongoing activity carried out by Understanding, Prediction, Mitigation and Restoration of Cascading Failures Task Force under IEEE Computer Analytical Methods Subcommittee (CAMS). The task force's previous papers [1, 2] are focused on general aspects of cascading outages such as understanding, prediction, prevention and restoration from cascading failures. This is the second of two new papers, which extend this previous work to summarize the state of the art in cascading failure risk analysis methodologies and modeling tools. The first paper reviews the state of the art in methodologies for performing risk assessment of potential cascading outages [3]. This paper describes the state of the art in cascading failure modeling tools, documenting the view of experts representing utilities, universities and consulting companies. The paper is intended to constitute a valid source of information and references about presently available tools that deal with prediction of cascading failure events. This effort involves reviewing published literature and other documentation from vendors, universities and research institutions. The assessment of cascading outages risk evaluation is in continuous evolution. Investigations to gain even better understanding and identification of cascading events are the subject of several research programs underway aimed at solving the complexity of these events that electrical utilities face today. Assessing the risk of cascading failure events in planning and operation for power transmission systems require adequate mathematical tools/software.

  16. International physical protection self-assessment tool for chemical facilities.

    SciTech Connect (OSTI)

    Tewell, Craig R.; Burdick, Brent A.; Stiles, Linda L.; Lindgren, Eric Richard

    2010-09-01T23:59:59.000Z

    This report is the final report for Laboratory Directed Research and Development (LDRD) Project No.130746, International Physical Protection Self-Assessment Tool for Chemical Facilities. The goal of the project was to develop an exportable, low-cost, computer-based risk assessment tool for small to medium size chemical facilities. The tool would assist facilities in improving their physical protection posture, while protecting their proprietary information. In FY2009, the project team proposed a comprehensive evaluation of safety and security regulations in the target geographical area, Southeast Asia. This approach was later modified and the team worked instead on developing a methodology for identifying potential targets at chemical facilities. Milestones proposed for FY2010 included characterizing the international/regional regulatory framework, finalizing the target identification and consequence analysis methodology, and developing, reviewing, and piloting the software tool. The project team accomplished the initial goal of developing potential target categories for chemical facilities; however, the additional milestones proposed for FY2010 were not pursued and the LDRD funding therefore was redirected.

  17. Community Assessment Tool for Public Health Emergencies Including Pandemic Influenza

    SciTech Connect (OSTI)

    ORAU's Oak Ridge Institute for Science Education (HCTT-CHE)

    2011-04-14T23:59:59.000Z

    The Community Assessment Tool (CAT) for Public Health Emergencies Including Pandemic Influenza (hereafter referred to as the CAT) was developed as a result of feedback received from several communities. These communities participated in workshops focused on influenza pandemic planning and response. The 2008 through 2011 workshops were sponsored by the Centers for Disease Control and Prevention (CDC). Feedback during those workshops indicated the need for a tool that a community can use to assess its readiness for a disaster - readiness from a total healthcare perspective, not just hospitals, but the whole healthcare system. The CAT intends to do just that - help strengthen existing preparedness plans by allowing the healthcare system and other agencies to work together during an influenza pandemic. It helps reveal each core agency partners (sectors) capabilities and resources, and highlights cases of the same vendors being used for resource supplies (e.g., personal protective equipment [PPE] and oxygen) by the partners (e.g., public health departments, clinics, or hospitals). The CAT also addresses gaps in the community's capabilities or potential shortages in resources. This tool has been reviewed by a variety of key subject matter experts from federal, state, and local agencies and organizations. It also has been piloted with various communities that consist of different population sizes, to include large urban to small rural communities.

  18. E-Print Network 3.0 - assessment tool development Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tool of the Month: Faculty Learning Groups Assessment Expo... and Context. Assessment of Creativity will also be included. ... Source: Kostic, Milivoje M. - Department of...

  19. E-Print Network 3.0 - assessment tools communicate Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tool of the Month: Faculty Learning Groups Assessment Expo... and Context. Assessment of Creativity will also be included. ... Source: Kostic, Milivoje M. - Department of...

  20. Community Assessment Tool for Public Health Emergencies Including Pandemic Influenza

    SciTech Connect (OSTI)

    HCTT-CHE

    2011-04-14T23:59:59.000Z

    The Community Assessment Tool (CAT) for Public Health Emergencies Including Pandemic Influenza (hereafter referred to as the CAT) was developed as a result of feedback received from several communities. These communities participated in workshops focused on influenza pandemic planning and response. The 2008 through 2011 workshops were sponsored by the Centers for Disease Control and Prevention (CDC). Feedback during those workshops indicated the need for a tool that a community can use to assess its readiness for a disaster梤eadiness from a total healthcare perspective, not just hospitals, but the whole healthcare system. The CAT intends to do just that梙elp strengthen existing preparedness plans by allowing the healthcare system and other agencies to work together during an influenza pandemic. It helps reveal each core agency partners' (sectors) capabilities and resources, and highlights cases of the same vendors being used for resource supplies (e.g., personal protective equipment [PPE] and oxygen) by the partners (e.g., public health departments, clinics, or hospitals). The CAT also addresses gaps in the community's capabilities or potential shortages in resources. While the purpose of the CAT is to further prepare the community for an influenza pandemic, its framework is an extension of the traditional all-hazards approach to planning and preparedness. As such, the information gathered by the tool is useful in preparation for most widespread public health emergencies. This tool is primarily intended for use by those involved in healthcare emergency preparedness (e.g., community planners, community disaster preparedness coordinators, 9-1-1 directors, hospital emergency preparedness coordinators). It is divided into sections based on the core agency partners, which may be involved in the community's influenza pandemic influenza response.

  1. Research Summary Sustainability impact assessment: tools for environmental, social and economic

    E-Print Network [OSTI]

    Research Summary Sustainability impact assessment: tools for environmental, social and economic to produce Sustainability Impact Assessment Tools (SIATs) that will be used to predict the impacts) and will be used as part of the Impact Assessment (IA) process, as set out in the Impact Assessment Guidelines

  2. Overview of existing residential energy-efficiency rating systems and measuring tools

    SciTech Connect (OSTI)

    Hendrickson, P.L.; Garrett-Price, B.A.; Williams, T.A.

    1982-10-01T23:59:59.000Z

    Three categories of rating systems/tools were identified: prescriptive, calculational, and performance. Prescriptive systems include rating systems that assign points to various conservation features. Most systems that have been implemented to date have been prescriptive systems. The vast majority of these are investor-owned utility programs affiliated with the National Energy Watch program of the Edison Electric Institute. The calculational category includes computational tools that can be used to estimate energy consumption. This estimate could then be transformed, probably by indexing, into a rating. The available computational tools range from very simple to complex tools requiring use of a main-frame computer. Performance systems refer to residential energy-efficiency ratings that are based on past fuel consumption of a home. There are few of these systems. For each identified system/tool, the name, address, and telephone number of the developer is included. In addition, relevant publications discussing the system/tool are cited. The extent of field validation/verification of individual systems and tools is discussed. In general, there has been little validation/verification done. A bibliography of literature relevant to the use and implementation of a home energy rating system is also included.

  3. Health impact assessment in planning: Development of the design for health HIA tools

    SciTech Connect (OSTI)

    Forsyth, Ann, E-mail: forsyth@cornell.ed [Cornell University, 106 West Sibley Hall, Ithaca, NY 14853 (United States); Slotterback, Carissa Schively, E-mail: cschively@umn.ed [Humphrey Institute of Public Affairs, University of Minnesota, 130 HHH Center, 301 19th Ave. S., Minneapolis, MN 55455 (United States); Krizek, Kevin J., E-mail: krizek@colorado.ed [Active Communities/Transportation (ACT) Research Group, University of Colorado, 1250 14th St. Denver, CO 80202 (United States)

    2010-01-15T23:59:59.000Z

    How can planners more systematically incorporate health concerns into practical planning processes? This paper describes a suite of health impact assessment tools (HIAs) developed specifically for planning practice. Taking an evidence-based approach the tools are designed to fit into existing planning activities. The tools include: a short audit tool, the Preliminary Checklist; a structured participatory workshop, the Rapid HIA; an intermediate health impact assessment, the Threshold Analysis; and a set of Plan Review Checklists. This description provides a basis for future work including assessing tool validity, refining specific tools, and creating alternatives.

  4. Tools for sustainability impact assessment of forestry policies: what role for social science?

    E-Print Network [OSTI]

    Tools for sustainability impact assessment of forestry policies: what role for social science: 路 Models & tools developed for the forestry sector are typically under-used 路 Impact assessment has little involvement to be deliberative, we need analytical tools, commonly associated with `the experts'." 路 "The most

  5. A Critical Assessment of Computer Tools for Calculating Composite Wind Turbine Blade Properties

    E-Print Network [OSTI]

    Yu, Wenbin

    A Critical Assessment of Computer Tools for Calculating Composite Wind Turbine Blade Properties Hui assess several computer tools for calculating the inertial and structural properties of wind turbine, and a realistic composite wind turbine blade are used to evaluate the performance of different tools

  6. A Dynamic Waste Isolation Pilot Plant Performance Assessment Tool - 12490

    SciTech Connect (OSTI)

    Scopatz, Anthony M.; March, Jonathan; Weckesser, Warren; Jones, Eric [Enthought Inc, Austin, Texas, 78701 (United States); Lee, Moo; Camphouse, Chris [Sandia National Laboratories, Carlsbad, NM, 88220 (United States)

    2012-07-01T23:59:59.000Z

    The Waste Isolation Pilot Plant (WIPP) Performance Assessment (PA) methodology comprises a toolbox used to demonstrate regulatory compliance of the repository after facility closure. The PA framework rests upon an extensive suite of computational codes. In some cases, significant alteration of code inputs is a tedious and difficult task. Due to the nature of the application for which they are used, PA codes used in support of WIPP regulatory compliance demonstration must satisfy stringent quality assurance requirements. Consequently, many of the coding practices used during original code development are still implemented today. A more efficient workflow configuration has the potential to alleviate difficulties associated with extensive code input modifications. Here, this potential is assessed via an implementation of a more flexible scientific workflow system for a subset of the codes used in WIPP PA. The scientific workflow approach taken here for a dynamic PA system enables users from disparate backgrounds to dramatically shorten the time between hypothesis and analysis by decreasing the amount of a priori knowledge, from a range of disciplines, needed to execute the code. Having smaller iteration times allows for more ideas to be tested and explored, which leads to safer and more optimized systems. Note that these high-level, dynamic tools are intended only for initial scoping studies on the personal computer of a researcher. Full, regulatory compliance calculations may occur only within a qualified computing environment. However, the WIPP PA tools here may guide future research and indicate regions of the analysis space that are worth further study. This next generation of PA software provides the ability to perform scoping investigations of repository performance quickly and easily, and has an accessible and useful interface to a variety of users, such as fuel cycle systems designers, domain experts such as repository modelers, and policy makers. The purview of this project allows for many opportunities for future work. Foremost among these is the desire to implement the full BRAGFLO suite within the workflow. This will entail porting or wrapping Genmesh, Matset, LHS, and ICSet within Python. Moreover, unifying the two GUIs into a single driver application would be a natural next step. Once the BRAGFLO suite is completed, other portions of WIPP PA could be implemented with corresponding and inter-operable work-flows. Likely first candidates for this are those codes that are similarly computationally intensive, such as the one used to generate complementary cumulative distribution functions used to demonstrate regulatory compliance (code CCDFGF). (authors)

  7. Using Data-Focused Tools to Assess Lower Vehicle Energy Use (Presentation)

    SciTech Connect (OSTI)

    Walkowicz, K.

    2013-05-01T23:59:59.000Z

    This presentation, 'Using Data-Focused Tools to Assess Lower Vehicle Energy Use,' was presented at the Green Truck Summit 2013; March 5, 2013, Indianapolis, IN.

  8. assessment tool begins: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the inertial and structural properties of wind turbine, and a realistic composite wind turbine blade are used to evaluate the performance of different tools Yu, Wenbin 36...

  9. COMMUNITY RISK PROFILE: A TOOL TO ASSESS A VARIETY OF HAZARDS ON A TERRITORY

    E-Print Network [OSTI]

    Boyer, Edmond

    , the existence of prevention and protection measures, the emergency preparedness and the resilience for this reason, there is a need for a risk assessment tool that would provide the user with an information aboutCOMMUNITY RISK PROFILE: A TOOL TO ASSESS A VARIETY OF HAZARDS ON A TERRITORY Bruno Debray, Bastien

  10. Development of an Automated Security Risk Assessment Methodology Tool for Critical Infrastructures.

    SciTech Connect (OSTI)

    Jaeger, Calvin D.; Roehrig, Nathaniel S.; Torres, Teresa M.

    2008-12-01T23:59:59.000Z

    This document presents the security automated Risk Assessment Methodology (RAM) prototype tool developed by Sandia National Laboratories (SNL). This work leverages SNL's capabilities and skills in security risk analysis and the development of vulnerability assessment/risk assessment methodologies to develop an automated prototype security RAM tool for critical infrastructures (RAM-CITM). The prototype automated RAM tool provides a user-friendly, systematic, and comprehensive risk-based tool to assist CI sector and security professionals in assessing and managing security risk from malevolent threats. The current tool is structured on the basic RAM framework developed by SNL. It is envisioned that this prototype tool will be adapted to meet the requirements of different CI sectors and thereby provide additional capabilities.

  11. A Decision Support Tool for the Pushback Rate Control of Airport Departures

    E-Print Network [OSTI]

    Gummadi, Ramakrishna

    -testing of these types of strategies at Boston Logan International Airport, focusing on the communication). Boston Logan International Airport (BOS) is a major airport in the United States, and serves1 A Decision Support Tool for the Pushback Rate Control of Airport Departures Melanie Sandberg

  12. Radionuclide release rates from spent fuel for performance assessment modeling

    SciTech Connect (OSTI)

    Curtis, D.B.

    1994-11-01T23:59:59.000Z

    In a scenario of aqueous transport from a high-level radioactive waste repository, the concentration of radionuclides in water in contact with the waste constitutes the source term for transport models, and as such represents a fundamental component of all performance assessment models. Many laboratory experiments have been done to characterize release rates and understand processes influencing radionuclide release rates from irradiated nuclear fuel. Natural analogues of these waste forms have been studied to obtain information regarding the long-term stability of potential waste forms in complex natural systems. This information from diverse sources must be brought together to develop and defend methods used to define source terms for performance assessment models. In this manuscript examples of measures of radionuclide release rates from spent nuclear fuel or analogues of nuclear fuel are presented. Each example represents a very different approach to obtaining a numerical measure and each has its limitations. There is no way to obtain an unambiguous measure of this or any parameter used in performance assessment codes for evaluating the effects of processes operative over many millennia. The examples are intended to suggest by example that in the absence of the ability to evaluate accuracy and precision, consistency of a broadly based set of data can be used as circumstantial evidence to defend the choice of parameters used in performance assessments.

  13. Assessing thermal comfort near glass facades with new tools

    E-Print Network [OSTI]

    Hoffmann, Sabine; Jedek, Christoph; Arens, Edward

    2012-01-01T23:59:59.000Z

    Hill, New York, 1973) Hoffmann, S. , Jedek, C. 揂dvancedCBE meeting, Oct 2011 Hoffmann, S. , Jedek, C. , WraNielsen,with new tools Sabine Hoffmann, Christoph Jedek, Edward

  14. Process Heating Assessment and Survey Tool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    identifies the most energy-intensive equipment. The tool can be used to perform a heat balance that identifies major areas of energy use under various operating conditions and...

  15. assessment tool mdat: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Liu, Andrew 444 Web tool for energy policy decision-making through geo-localized LCA models: A focus on offshore wind farms in Northern Europe Physics Websites Summary: 1...

  16. Selected component failure rate values from fusion safety assessment tasks

    SciTech Connect (OSTI)

    Cadwallader, L.C.

    1998-09-01T23:59:59.000Z

    This report is a compilation of component failure rate and repair rate values that can be used in magnetic fusion safety assessment tasks. Several safety systems are examined, such as gas cleanup systems and plasma shutdown systems. Vacuum system component reliability values, including large vacuum chambers, have been reviewed. Values for water cooling system components have also been reported here. The report concludes with the examination of some equipment important to personnel safety, atmospheres, combustible gases, and airborne releases of radioactivity. These data should be useful to system designers to calculate scoping values for the availability and repair intervals for their systems, and for probabilistic safety or risk analysts to assess fusion systems for safety of the public and the workers.

  17. Selected Component Failure Rate Values from Fusion Safety Assessment Tasks

    SciTech Connect (OSTI)

    Cadwallader, Lee Charles

    1998-09-01T23:59:59.000Z

    This report is a compilation of component failure rate and repair rate values that can be used in magnetic fusion safety assessment tasks. Several safety systems are examined, such as gas cleanup systems and plasma shutdown systems. Vacuum system component reliability values, including large vacuum chambers, have been reviewed. Values for water cooling system components have also been reported here. The report concludes with the examination of some equipment important to personnel safety, atmospheres, combustible gases, and airborne releases of radioactivity. These data should be useful to system designers to calculate scoping values for the availability and repair intervals for their systems, and for probabilistic safety or risk analysts to assess fusion systems for safety of the public and the workers.

  18. Tooling Factor Calculation In order to yield a more accurate indication of a deposited film's thickness, the rate

    E-Print Network [OSTI]

    Kim, Philip

    Tooling Factor Calculation In order to yield a more accurate indication of a deposited film's thickness, the rate monitor's tooling factor attempts to compensate for necessary differences member before changing an established tooling factor. 1. Position a sample, masked on a half

  19. Identifying Steam Opportunity "Impact" Inputs for the Steam System Assessment Tool (SSAT)

    E-Print Network [OSTI]

    Harrell, G.; Jendrucko, R.; Wright, A.

    2004-01-01T23:59:59.000Z

    IDENTIFYING STEAM OPPORTUNITY "IMPACT" INPUTS FOR THE STEAM SYSTEM ASSESSMENT TOOL (SSAT) Dr. Greg Harrell, University of Tennessee/Knoxville Dr. Richard Jendrucko, University of Tennessee/Knoxville Dr. Anthony Wright, Oak Ridge National...

  20. Decision-support tools for the assessment process

    SciTech Connect (OSTI)

    Whelan, Gene; Pelton, Mitch A.; Dorow, Kevin E.

    2004-06-14T23:59:59.000Z

    A new software system is under development that provides a framework to link disparate assessment software and databases for site-specific, regional, or national analyses. This system represents the merger of the Framework for Risk Analysis in Multimedia Environmental Systems (FRAMES), which performs site-specific assessments, and Multi-media, Multi-pathway, Multi-receptor Risk Assessment (3MRA) methodology, which performs regional and national assessments. This Merged System is an icon-driven, site-layout platform, which represents an interactive means by which the user graphically constructs a conceptualization of the problem by visually expressing the assessment, indicating sources of contamination, contaminant travel pathways through the environment, linkages between contamination and people or wildlife, and impacts associated with the contamination. It processes data as part of a systems-based assessment and is an open-architecture, object-oriented framework, which contains ''sockets'' for a collection of databases and computer codes that will transparently simulate elements of transport, exposure, and risk assessment, including contaminant source and release to and through overland soils, vadose and saturated zones, air, surface water, food supply, intake human health impacts, sensitivity/uncertainty, ecological impacts, with the ability to expand into areas including Geographical Information System (GIS), remediation technology, cost analysis, Data Quality Objectives, life-cycle management, and conceptual site design. A user can choose from a list of models, and the assessment path forward can be visually presented, which describes the models and their linkages from source through receptor to the decision-making endpoint.

  1. Results From the Industrial Assessment Center (IAC) Steam Tool Benchmarking Support Project

    E-Print Network [OSTI]

    Wright, A. L.; Bassett, K.; Eckerlin, H.; Ganji, A.; Hengeveld, D.; Jendrucko, R.; Kosanovic, D.; Turner, W.

    developed is the "Steam System Scoping Tool." In the summer of 2001, six of the DOE Industrial Assessment Centers (IACs) completed a project to provide data on the usefulness of the Steam System Scoping Tool. These six IACs performed eighteen plant steam...

  2. PET: a Tool for Post-editing and Assessing Machine Translation Wilker Aziz* and Lucia Specia**

    E-Print Network [OSTI]

    Mitkov, Ruslan

    PET: a Tool for Post-editing and Assessing Machine Translation Wilker Aziz* and Lucia Specia.Specia@sheffield.ac.uk Download: http://pers-www.wlv.ac.uk/~in1676/pet/ Given the significant recent improvements in Machine required to correct them. PET, a stand-alone Post-Editing Tool has two main purposes: facilitate the post

  3. Environmental life cycle assessment as a decision making tool

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    路 Bi-objective optimization to consider environmental and economic metrics 路 Steam and Power Plant and Heijungs (2002). Handbook on Life Cycle Assessment. Kluwer Academic Publ. #12;PASI 2011 Potential #12;PASI 2011 Steam and power plant #12;PASI 2011 Steam and power demands #12;Mart铆nez P. and Eliceche

  4. E-Print Network 3.0 - assessment rate niear Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Item Construction Response Rating WSDLWSDL SOAP... , 60 2009 Sofia Service Oriented Architecture of Assessment Model1 Adelina Aleksieva... Assessment Model. To achieve...

  5. Terrestrial perturbation experiments as an environmental assessment tool

    SciTech Connect (OSTI)

    Suter, G.W. II

    1980-08-01T23:59:59.000Z

    The National Environmental Policy Act of 1969 (NEPA) was initially interpreted as requiring full disclosure of the environmental impacts of a federal action. Because of the limitations of time, money, and manpower, this requirement that all impacts be considered has led to superficial analysis of many important impacts. The President's Council on Environmental Quality (CEQ) has provided a solution to this problem by reinterpreting NEPA as requiring analysis of those impacts which have significant bearing on decision making. Because assessment resources can now be concentrated on a few critical issues, it should be possible to perform field perturbation experiments to provide direct evidence of the effects of a specific mixture of pollutants or physical disturbances on the specific receiving ecosystem. Techniques are described for field simulation of gaseous and particulate air pollution, soil pollutants, disturbance of the earth's surface, and disturbance of wildlife. These techniques are discussed in terms of their realism, cost, and the restrictions which they place on the measurement of ecological parameters.

  6. Implementing Strategic Environmental Assessment of spatial planning tools

    SciTech Connect (OSTI)

    De Montis, Andrea, E-mail: andreadm@uniss.it

    2013-07-15T23:59:59.000Z

    After more than a decade from the publication of the European Directive 2001/42/CE (Directive) on Strategic Environmental Assessment (SEA), the design and construction of the interested spatial planning instruments has gone through a variety of changes and integrations in European and in world states. This inhomogeneous panorama can be explained with a pattern of institutional structures that have so far affected the implementation of the Directive. The aim of this paper is to investigate the level of implementation of the Directive in Italy by developing a comparative analysis of the quality of integration of SEA within the design of the spatial coordination plan of a set of Italian provinces. Italian practice is analyzed in the framework of a comparative study of worldwide SEA implementation within spatial and land use planning. The results reveal strengths and weaknesses in SEA implementation at the provincial level and, in particular, the emergence of critical areas of research concerning institutional context, public participation, monitoring, and observatory of the spatial transformations. -- Highlights: This is a comparative analysis of SEA in strategic spatial planning in Italy. The adhesion of Provinces to the study is remarkable. SEA implementation and integration into spatial planning is still moderate. Participation via consultations should be more widespread. Monitoring and institution of observatories are still in an infancy stage.

  7. LCA-IWM: A decision support tool for sustainability assessment of waste management systems

    SciTech Connect (OSTI)

    Boer, J. den [Institute of Water Supply and Groundwater Protection, Wastewater Technology, Waste Management, Industrial Material Cycles, Environmental and Spatial Planning (Institute WAR), Technische Universitaet Darmstadt, Petersenstr. 13, 64287 Darmstadt (Germany)], E-mail: j.denboer@iwar.tu-darmstadt.de; Boer, E. den; Jager, J. [Institute of Water Supply and Groundwater Protection, Wastewater Technology, Waste Management, Industrial Material Cycles, Environmental and Spatial Planning (Institute WAR), Technische Universitaet Darmstadt, Petersenstr. 13, 64287 Darmstadt (Germany)

    2007-07-01T23:59:59.000Z

    The paper outlines the most significant result of the project 'The use of life cycle assessment tools for the development of integrated waste management strategies for cities and regions with rapid growing economies', which was the development of two decision-support tools: a municipal waste prognostic tool and a waste management system assessment tool. The article focuses on the assessment tool, which supports the adequate decision making in the planning of urban waste management systems by allowing the creation and comparison of different scenarios, considering three basic subsystems: (i) temporary storage; (ii) collection and transport and (iii) treatment, disposal and recycling. The design and analysis options, as well as the assumptions made for each subsystem, are shortly introduced, providing an overview of the applied methodologies and technologies. The sustainability assessment methodology used in the project to support the selection of the most adequate scenario is presented with a brief explanation of the procedures, criteria and indicators applied on the evaluation of each of the three sustainability pillars.

  8. Assessment of the U.S. Department of Energy's Home Energy Scoring Tool

    SciTech Connect (OSTI)

    Roberts, D.; Merket, N.; Polly, B.; Heaney, M.; Casey, S.; Robertson, J.

    2012-07-01T23:59:59.000Z

    The National Renewable Energy Laboratory (NREL) conducted a series of assessments of the U.S. Department of Energy's (DOE) proposed Home Energy Scoring Tool (HEST). This report is an assessment of the 4/27/2012 release of HEST. Predictions of electric and natural gas consumption were compared with weather-normalized utility billing data for a mixture of newer and older homes located in Oregon, Wisconsin, Minnesota, North Carolina and Texas.

  9. Web-based Tool for Preliminary Assessment of Wind Power Plant Design

    E-Print Network [OSTI]

    Mustakerov, Ivan

    Web-based Tool for Preliminary Assessment of Wind Power Plant Design Daniela Borissova1 and Ivan. Designing of reliable and cost-effective industrial wind power plant is a prerequisite for the effective use of wind power as an alternative resource. The design of a wind power plant includes the determination

  10. Decision-support tool for assessing future nuclear reactor generation portfolios.

    E-Print Network [OSTI]

    Oosterlee, Cornelis W. "Kees"

    Decision-support tool for assessing future nuclear reactor generation portfolios. Shashi Jain, where especially capital costs are known to be highly uncertain. Differ- ent nuclear reactor types uncertainties in the cost elements of a nuclear power plant, to provide an optimal portfolio of nuclear reactors

  11. Developing a GIS tool to assess potential damage of future floods J. Eleutrio1,2

    E-Print Network [OSTI]

    Boyer, Edmond

    analysis, vulnerability assessment, natural hazard, decision support tool. 1 Introduction Flood risk brings and A. Rozan1 1 UMR Cemagref/ENGEES GESTE, Territorial Management of Water and Environment, France 2 UTR Urban Hydraulics - UMR CNRS/UdS/ ENGEES Mechanical Institute of Fluids and Solids, France Abstract

  12. Soil trampling in an Antarctic Specially Protected Area: tools to assess levels of human impact

    E-Print Network [OSTI]

    Justel Eusebio, Ana

    Soil trampling in an Antarctic Specially Protected Area: tools to assess levels of human impact P of current advice relating to travel on foot over Antarctic vegetation-free soils. These are based to alter both physical and biological characteristics of Byers Peninsula soils, although at the lowest

  13. ESTABoues, a decision tool to assess greenhouse gases of sewage sludge treatment and di

    E-Print Network [OSTI]

    Paris-Sud XI, Universit茅 de

    digestion, aerobic digestion, dewatering, al composting, drying) and sludge disposal route (land applicationORBIT2012 G ESTABoues, a decision tool to assess greenhouse gases of sewage sludge treatment and di-laure.reverdy@irstea.fr EXECUTIVE SUMMARY Sewage sludge production increases continuously reaching almost 20% (946 700 t 1 118 795

  14. Socio-economic analysis: a tool for assessing the potential of nanotechnologies

    E-Print Network [OSTI]

    Paris-Sud XI, Universit茅 de

    Socio-economic analysis: a tool for assessing the potential of nanotechnologies Jean-Marc Brignon the denomination of Socio-Economic Analysis (SEA), this concept is used in EU safety and environmental regulation important asset of SEA regarding nanomaterials, is the comparison with alternatives in socio-economic

  15. Tool Support for Continuous Quality Assessment Florian Deissenboeck, Markus Pizka, Tilman Seifert

    E-Print Network [OSTI]

    Tool Support for Continuous Quality Assessment Florian Deissenboeck, Markus Pizka, Tilman Seifert Maintenance costs make up the bulk of the total life cycle costs of a software system. Besides organizational predetermined by var- ious quality attributes of the software system itself, such as redundancy and adequate

  16. Organizational Assessment Of Integrating CAD And Product Data Management Tools In The Furniture Industry

    E-Print Network [OSTI]

    Organizational Assessment Of Integrating CAD And Product Data Management Tools In The Furniture Industry Furniture Manufacturing and Management Center Technical Report 1996-1997 Eric N. Wiebe Jennifer J) organizational structure, 3) power distribution, and 4) user communication patterns. The technology

  17. Incorporating Life Cycle Assessment into the LEED Green Building Rating System

    E-Print Network [OSTI]

    Victoria, University of

    Incorporating Life Cycle Assessment into the LEED Green Building Rating System by Michael Supervisory Committee Incorporating Life Cycle Assessment into the LEED Green Building Rating System and regional product criteria within the LEED Green Building rating system are not based on comprehensive

  18. Field Assessment Tool for Deep Peat This methodology is designed to be undertaken at a site which has already been

    E-Print Network [OSTI]

    Field Assessment Tool for Deep Peat This methodology is designed to be undertaken at a site which. The surveyor should have undertaken training in the application of this tool and the interpretation of the score. Tools you will require: Peat depth probe Pruning saw Clinometer Peat core sampler Map of the area

  19. NREL's DRIVE tool delivers precise and easy-to-interpret assessments in a fraction of the time.

    E-Print Network [OSTI]

    NREL's DRIVE tool delivers precise and easy-to-interpret assessments in a fraction of the time and Evaluation (DRIVE) tool produces representative testable drive cycles at record speed from vehicle data of medium- and heavy-duty vehicle fleets, use of the tool has expanded to encompass the full range

  20. CS2SAT: THE CONTROL SYSTEMS CYBER SECURITY SELF-ASSESSMENT TOOL

    SciTech Connect (OSTI)

    Kathleen A. Lee

    2008-01-01T23:59:59.000Z

    The Department of Homeland Security National Cyber Security Division has developed the Control System Cyber Security Self-Assessment Tool (CS2SAT) that provides users with a systematic and repeatable approach for assessing the cyber-security posture of their industrial control system networks. The CS2SAT was developed by cyber security experts from Department of Energy National Laboratories and with assistance from the National Institute of Standards and Technology. The CS2SAT is a desktop software tool that guides users through a step-by-step process to collect facility-specific control system information and then makes appropriate recommendations for improving the system抯 cyber-security posture. The CS2SAT provides recommendations from a database of industry available cyber-security practices, which have been adapted specifically for application to industry control system networks and components. Each recommendation is linked to a set of actions that can be applied to remediate-specific security vulnerabilities.

  1. Life cycle assessment as an analytical tool in strategic environmental assessment. Lessons learned from a case study on municipal energy planning in Sweden

    SciTech Connect (OSTI)

    Bjoerklund, Anna, E-mail: annab@abe.kth.se

    2012-01-15T23:59:59.000Z

    Life cycle assessment (LCA) is explored as an analytical tool in strategic environmental assessment (SEA), illustrated by case where a previously developed SEA process was applied to municipal energy planning in Sweden. The process integrated decision-making tools for scenario planning, public participation and environmental assessment. This article describes the use of LCA for environmental assessment in this context, with focus on methodology and practical experiences. While LCA provides a systematic framework for the environmental assessment and a wider systems perspective than what is required in SEA, LCA cannot address all aspects of environmental impact required, and therefore needs to be complemented by other tools. The integration of LCA with tools for public participation and scenario planning posed certain methodological challenges, but provided an innovative approach to designing the scope of the environmental assessment and defining and assessing alternatives. - Research highlights: Black-Right-Pointing-Pointer LCA was explored as analytical tool in an SEA process of municipal energy planning. Black-Right-Pointing-Pointer The process also integrated LCA with scenario planning and public participation. Black-Right-Pointing-Pointer Benefits of using LCA were a systematic framework and wider systems perspective. Black-Right-Pointing-Pointer Integration of tools required some methodological challenges to be solved. Black-Right-Pointing-Pointer This proved an innovative approach to define alternatives and scope of assessment.

  2. Energy efficiency assessment methods and tools evaluation. Bolling Air Force Base. Revision 1

    SciTech Connect (OSTI)

    McMordie, K.L.; Richman, E.E.; Keller, J.M.; Dixon, D.R.

    1995-05-01T23:59:59.000Z

    The goal of the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) is to facilitate energy-efficiency improvements at federal facilities. This is accomplished by a balanced program of technology development, facility assessment, and use of cost-sharing procurement mechanisms. Technology development focuses upon the tools, software, and procedures used to identify and evaluate energy-efficiency technologies and improvements. For facility assessment, FEMP provides metering equipment and trained analysts to federal agencies exhibiting a commitment to improve energy use efficiency. To assist in procurement of energy-efficiency measures, FEMP helps federal agencies devise and implement performance contracting and utility demand-side management strategies. Pacific Northwest Laboratory (PNL) supports the FEMP mission of energy systems modernization. Under this charter, the Laboratory and its contractors work with federal facility energy managers to assess and implement energy-efficiency improvements at federal facilities nationwide.

  3. Heart rate variability and respiratory sinus arrhythmia assessment of affective states by bivariate autoregressive spectral analysis

    E-Print Network [OSTI]

    Magagnin, Valentina

    The study of emotions elicited by human-computer interactions is a promising field that could lead to the identification of specific patterns of affective states. We present a heart rate variability (HRV) assessment of the ...

  4. Assessment of Baroreflex Control of Heart Rate During General Anesthesia Point Process Method

    E-Print Network [OSTI]

    Pierce, Eric T.

    Evaluation of baroreflex control of heart rate (HR) has important implications in clinical practice of anesthesia and postoperative care. In this paper, we present a point process method to assess the dynamic baroreflex ...

  5. Application of a pilot control banding tool for risk level assessment and control of nanoparticle exposures

    SciTech Connect (OSTI)

    Paik, S Y; Zalk, D M; Swuste, P

    2008-03-03T23:59:59.000Z

    Control Banding (CB) strategies offer simplified solutions for controlling worker exposures to constituents that are found in the workplace in the absence of firm toxicological and exposure data. These strategies may be particularly useful in nanotechnology applications, considering the overwhelming level of uncertainty over what nanomaterials and nanotechnologies present as potential work-related health risks, what about these materials might lead to adverse toxicological activity, how risk related to these might be assessed, and how to manage these issues in the absence of this information. This study introduces a pilot CB tool or 'CB Nanotool' that was developed specifically for characterizing the health aspects of working with engineered nanoparticles and determining the level of risk and associated controls for five ongoing nanotechnology-related operations being conducted at two Department of Energy (DOE) research laboratories. Based on the application of the CB Nanotool, four of the five operations evaluated in this study were found to have implemented controls consistent with what was recommended by the CB Nanotool, with one operation even exceeding the required controls for that activity. The one remaining operation was determined to require an upgrade in controls. By developing this dynamic CB Nanotool within the realm of the scientific information available, this application of CB appears to be a useful approach for assessing the risk of nanomaterial operations, providing recommendations for appropriate engineering controls, and facilitating the allocation of resources to the activities that most need them.

  6. A proposed tool to integrate environmental and economical assessments of products

    SciTech Connect (OSTI)

    Senthil, Kumaran D.; Ong, S.K.; Nee, A.Y.C.; Tan, Reginald B.H

    2003-01-01T23:59:59.000Z

    An attempt has been made to interpret the outcomes of a Life Cycle Assessment (LCA) in terms of environmental costs. This attempt ensures the environmental accountability of the products while LCA ensures their eco-friendly nature. Keeping this as an objective, a Life Cycle Environmental Cost Analysis (LCECA) model was developed. This new tool incorporates costing into the LCA practice. This model prescribes a life cycle environmental cost model to estimate and correlate the effects of these costs in all the life cycle stages of the product. The newly developed categories of eco-costs are: costs of effluent treatment/control/disposal, environmental management systems, eco-taxes, rehabilitation, energy and savings of recycling and reuse strategies. The mathematical model of LCECA determines quantitative expressions between the total cost of products and the various eco-costs. The eco-costs of the alternatives are compared with the computational LCECA model. This method enables the environmental as well as the economic assessment of products, which leads to cost-effective, eco-friendly design of products.

  7. Tool Helps Utilities Assess Readiness for Electric Vehicle Charging (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    NREL research helps answer a fundamental question regarding electric vehicles: Is the grid ready to handle them? Environmental, economic and security concerns regarding oil consumption make electrifying the transportation sector a high national priority. NREL's Center for Transportation Technologies & Systems (CTTS) has developed a framework for utilities to evaluate the plug-in vehicle (PEV) readiness of distribution transformers. Combining a wealth of vehicle performance statistics with load data from partner utilities including the Hawaiian Electric Company and Xcel Energy, NREL analyzed the thermal loading characteristics of distribution transformers due to vehicle charging. After running millions of simulations replicating varying climates and conditions, NREL is now able to predict aging rates for transformers when PEVs are added to existing building loads. With the NREL tool, users define simulation parameters by inputting vehicle trip and weather data; transformer load profiles and ratings; PEV penetration, charging rates and battery sizes; utility rates; the number of houses on each transformer; and public charging availability. Transformer load profiles, drive cycles, and ambient temperature data are then run through the thermal model to produce a one-year timeseries of the hotspot temperature. Annual temperature durations are calculated to help determine the annual aging rate. Annual aging rate results are grouped by independent variables. The most useful measure is transformer mileage, a measure of how many electrically-driven miles must be supplied by the transformer. Once the spectrum analysis has been conducted for an area or utility, the outputs can be used to help determine if more detailed evaluation is necessary, or if transformer replacement is required. In the majority of scenarios, transformers have enough excess capacity to charge PEVs. Only in extreme cases does vehicle charging have negative long-term impact on transformers. In those cases, upgrades to larger transformers would be recommended. NREL analysis also showed opportunity for newly-installed smart grids to offset distribution demands by time-shifting the charging loads. Most importantly, the model demonstrated synergies between PEVs and distributed renewables, not only providing clean renewable energy for vehicles, but also reducing demand on the entire distribution infrastructure by supplying loads at the point of consumption.

  8. DOE Commercial Building Asset Rating: An Application of Centralized Modeling Tools

    SciTech Connect (OSTI)

    Wang, Na; Gorrissen, Willy J.; Srivastava, Viraj; Taylor, Cody

    2012-06-26T23:59:59.000Z

    This paper presents a novel approach used to develop the U.S. Department of Energy (DOE) Commercial Building Asset Rating, which is intended to help building owners better understand the installed system performance and the total energy use. A simplified data collection and energy-modeling method is employed to disaggregate building energy information. Furthermore, the approach outlined will also include a mechanism for identifying energy improvement opportunities. A detailed modeling approach to formulate an Asset Rating would most likely provide the greatest flexibility and accuracy. Such an approach would, however, require a substantial amount of user investment for collecting the energy audit, data and hiring a professional to perform energy modeling and analysis. A simplified model approach requires fewer input combinations, which could reduce opportunities for error and allow an inexperienced user to quickly develop energy models. However, the accuracy of the results is often questionable. To address the above issue, the method presented in this paper separates model inputs into categories based on overall energy impact, difficulty to obtain, and variability among buildings. We outline an approach that will allow great flexibility in terms of how many and which of the different categories of variables must be found to produce an accurate energy model. The approach will allow all key variables to be inferred from some minimum set of variables while at the same time allowing a user to enter many more variables if he or she has reliable values for them. The approach outlined will also provide constant values for some variables and algorithms for finding those which are very difficult to determine in the field. The whole of this approach will reduce modeling time and expertise required while maintaining accuracy and the ability to support the variability and complexity that exist in buildings. Therefore, the goals of facilitating cost-effective investment in energy efficiency and reducing energy use in the commercial building sector are met.

  9. Assessments of fluid friction factors for use in leak rate calculations

    SciTech Connect (OSTI)

    Chivers, T.C. [Berkeley Technology Centre, Glos (United Kingdom)

    1997-04-01T23:59:59.000Z

    Leak before Break procedures require estimates of leakage, and these in turn need fluid friction to be assessed. In this paper available data on flow rates through idealized and real crack geometries are reviewed in terms of a single friction factor k It is shown that for {lambda} < 1 flow rates can be bounded using correlations in terms of surface R{sub a} values. For {lambda} > 1 the database is less precise, but {lambda} {approx} 4 is an upper bound, hence in this region flow calculations can be assessed using 1 < {lambda} < 4.

  10. Assess the Efficacy of an Aerial Distant Observer Tool Capable of Rapid Analysis of Large Sections of Collector Fields: FY 2008 CSP Milestone Report, September 2008

    SciTech Connect (OSTI)

    Jorgensen, G.; Burkholder, F.; Gray, A.; Wendelin, T.

    2009-02-01T23:59:59.000Z

    We assessed the feasibility of developing an aerial Distant Observer optical characterization tool for collector fields in concentrating solar power plants.

  11. Design Tools to Assess Hydro-Turbine Biological Performance: Priest Rapids Dam Turbine Replacement Project

    SciTech Connect (OSTI)

    Richmond, Marshall C.; Rakowski, Cynthia L.; Serkowski, John A.; Strickler, Brad; Weisbeck, Molly; Dotson, Curtis L.

    2013-06-25T23:59:59.000Z

    Over the past two decades, there have been many studies describing injury mechanisms associated with turbine passage, the response of various fish species to these mechanisms, and the probability of survival through dams. Although developing tools to design turbines that improve passage survival has been difficult and slow, a more robust quantification of the turbine environment has emerged through integrating physical model data, fish survival data, and computational fluid dynamics (CFD) studies. Grant County Public Utility District (GCPUD) operates the Priest Rapids Dam (PRD), a hydroelectric facility on the Columbia River in Washington State. The dam contains 10 Kaplan-type turbine units that are now almost 50 years old. The Utility District plans to refit all of these aging turbines with new turbines. The Columbia River at PRD is a migratory pathway for several species of juvenile and adult salmonids, so passage of fish through the dam is a major consideration when replacing the turbines. In this presentation, a method for turbine biological performance assessment (BioPA) is introduced. Using this method, a suite of biological performance indicators is computed based on simulated data from a CFD model of a proposed turbine design. Each performance indicator is a measure of the probability of exposure to a certain dose of an injury mechanism. Using known relationships between the dose of an injury mechanism and frequency of injury (dose杛esponse) from laboratory or field studies, the likelihood of fish injury for a turbine design can be computed from the performance indicator. By comparing the values of the indicators from proposed designs, the engineer can identify the more-promising alternatives. We will present application of the BioPA method for baseline risk assessment calculations for the existing Kaplan turbines at PRD that will be used as the minimum biological performance that a proposed new design must achieve.

  12. Assessing the Importance of Nonlinearities in the Development of a Substructure Model for the Wind Turbine CAE Tool FAST: Preprint

    SciTech Connect (OSTI)

    Damiani, R.; Jonkman, J.; Robertson, A.; Song, H.

    2013-03-01T23:59:59.000Z

    Design and analysis of wind turbines are performed using aero-servo-elastic tools that account for the nonlinear coupling between aerodynamics, controls, and structural response. The NREL-developed computer-aided engineering (CAE) tool FAST also resolves the hydrodynamics of fixed-bottom structures and floating platforms for offshore wind applications. This paper outlines the implementation of a structural-dynamics module (SubDyn) for offshore wind turbines with space-frame substructures into the current FAST framework, and focuses on the initial assessment of the importance of structural nonlinearities. Nonlinear effects include: large displacements, axial shortening due to bending, cross-sectional transverse shear effects, etc.

  13. Stored CO2 and Methane Leakage Risk Assessment and Monitoring Tool Development: CO2 Capture Project Phase 2 (CCP2)

    SciTech Connect (OSTI)

    Dan Kieki

    2008-09-30T23:59:59.000Z

    The primary project goal is to develop and test tools for optimization of ECBM recovery and geologic storage of CO{sub 2} in coalbeds, in addition to tools for monitoring CO{sub 2} sequestration in coalbeds to support risk assessment. Three critical topics identified are (1) the integrity of coal bed methane geologic and engineered systems, (2) the optimization of the coal bed storage process, and (3) reliable monitoring and verification systems appropriate to the special conditions of CO{sub 2} storage and flow in coals.

  14. Assessment and Improvements of the CBE Underfloor Air Distribution (UFAD) Cooling Load Design Tool

    E-Print Network [OSTI]

    Chen, Bin

    2014-01-01T23:59:59.000Z

    Underfloor air distribution (UFAD) design guide. AmericanUnderfloor Air Distribution (UFAD) Cooling Load Design Toolload design tool for underfloor air distribution (UFAD)

  15. Tracer Gas as a Practical Field Diagnostic Tool for Assessing Duct System Leaks

    E-Print Network [OSTI]

    Cummings, J. B.

    1989-01-01T23:59:59.000Z

    diagnostic tools for detecting and locating leaks in the air distribution system. The tracer gas tests described are a good complement to these tools in the detection, location, and measurement of duct leakage. Testing for house infiltration once with the air...

  16. Energy Analysis and Diagnostics: A Computer Based Tool for Industrial Self Assessment

    E-Print Network [OSTI]

    Gopalakrishnan, B.; Plummer, R. W.; Nagarajan, S.; Kolluri, R.

    each BTU of energy produced. This paper describes the design and development of a computer based tool (ENERGEX) which aids the industrial user in developing energy conservation opportunities (ECOs) in plants. The software system is capable...

  17. The Steam System Assessment Tool (SSAT): Estimating Steam System Energy, Cost, and Emission Savings

    E-Print Network [OSTI]

    Wright, A.; Bealing, C.; Eastwood, A.; Tainsh, R.; Hahn, G.; Harrell, G.

    The U. S. Department of Energy's (DOE) Industrial Technology Program BestPractices Steam effort is developing a number of software tools to assist industrial energy users to improve the efficiency of their steam system. A major new Best...

  18. Green rating tools and climate resilient buildings Understanding the role of the built environment in mitigating and adapting to climate change is

    E-Print Network [OSTI]

    Greenaway, Alan

    1 Green rating tools and climate resilient buildings Understanding the role of the built, as the requirement for a demonstrable level of best practice performance becomes more common, such green building targets1 , as well as for the long-term resilience and viability of both new and existing buildings. So

  19. Assessing the Potential of Developing a Tool for Residential Facility Management Using Building Information Modeling Software

    E-Print Network [OSTI]

    Madhani, Himanshu 1986-

    2012-11-29T23:59:59.000Z

    in analyzing the scope of using BIM and Application Programming Interface (API) for management of maintenance in residences by the owner who are not professionally trained. The research analyzes a single, basic function of a BIM tool to determine the potential...

  20. Development and implementation of a coral health assessment tool for St. John, USVI

    E-Print Network [OSTI]

    Detlefsen, William Robert

    2007-01-01T23:59:59.000Z

    Coral health in St. John, US Virgin Islands, has shown tremendous declines in recent years, with more than 50% declines in live coral cover. As one component of a group project to assess the possible impacts of anthropogenic ...

  1. RISK REDUCTION THROUGH USE OF EXTERNAL TECHNICAL REVIEWS, TECHNOLOGY READINESS ASSESSMENTS AND TECHNICAL RISK RATINGS - 9174

    SciTech Connect (OSTI)

    Cercy, M; Steven P Schneider, S; Kurt D Gerdes, K

    2009-01-15T23:59:59.000Z

    The U.S. Department of Energy's Office of Environmental Management (DOE-EM) was established to achieve the safe and compliant disposition of legacy wastes and facilities from defense nuclear applications. A large majority of these wastes and facilities are 'one-of-a-kind' and unique to DOE. Many of the programs to treat these wastes have been 'first-of-a-kind' and unprecedented in scope and complexity. This has meant that many of the technologies needed to successfully disposition these wastes were not yet developed or required significant re-engineering to be adapted for DOE-EM's needs. The DOE-EM program believes strongly in reducing the technical risk of its projects and has initiated several efforts to reduce those risks: (1) Technology Readiness Assessments to reduce the risks of deployment of new technologies; (2) External Technical Reviews as one of several steps to ensure the timely resolution of engineering and technology issues; and (3) Technical Risk Ratings as a means to monitor and communicate information about technical risks. This paper will present examples of how Technology Readiness Assessments, External Technical Reviews, and Technical Risk Ratings are being used by DOE-EM to reduce technical risks.

  2. RISK REDUCTION THROUGH USE OF EXTERNAL TECHNICAL REVIEWS, TECHNOLOGY READINESS ASSESSMENTS AND TECHNICAL RISK RATINGS - 9174

    SciTech Connect (OSTI)

    Cercy, M; Steven P Schneider, S; Kurt D Gerdes, K

    2008-12-12T23:59:59.000Z

    The U.S. Department of Energy's Office of Environmental Management (DOE-EM) was established to achieve the safe and compliant disposition of legacy wastes and facilities from defense nuclear applications. A large majority of these wastes and facilities are 'one-of-a-kind' and unique to DOE. Many of the programs to treat these wastes have been 'first-of-a-kind' and unprecedented in scope and complexity. This has meant that many of the technologies needed to successfully disposition these wastes were not yet developed or required significant re-engineering to be adapted for DOE-EM's needs. The DOE-EM program believes strongly in reducing the technical risk of its projects and has initiated several efforts to reduce those risks: (1) Technology Readiness Assessments to reduce the risks of deployment of new technologies; (2) External Technical Reviews as one of several steps to ensure the timely resolution of engineering and technology issues; and (3) Technical Risk Ratings as a means to monitor and communicate information about technical risks. This paper will present examples of how Technology Readiness Assessments, External Technical Reviews, and Technical Risk Ratings are being used by DOE-EM to reduce technical risks.

  3. pre-acts -6th annual international conference of Territorial Intelligence -caENTI October 2008 1 SUSTAINABLE DEVELOPMENT ASSESSMENT TOOLS DEDICATED TO TERRITORIAL

    E-Print Network [OSTI]

    Boyer, Edmond

    Natural Gas Industry). 1.2 Material and Energy Flow Analysis : an innovative tool dedicated to territorial or industrial ecology projects Material and Energy Flow Analysis is a tool to count the flows that enter or get and Energy Flow Analysis (MEFA), Life Cycle Assessment (LCA), Carbon Balance and Ecological Footprint

  4. The World Stress Map - A Freely Accessible Tool For Geohazard Assessment

    SciTech Connect (OSTI)

    Mueller, Birgit; Heidbach, Oliver; Tingay, Mark [World Stress Map Project of the Heidelberg Academy of Sciences and Humanities, Geophysical Institute, Karlsruhe University, Hertzstrasse 16, 76187 Karlsruhe (Germany)

    2006-03-23T23:59:59.000Z

    The World Stress Map (WSM) database contains over 16,000 indicators on contemporary crustal tectonic stress and provides an essential parameter for geohazard assessment. This paper focuses on the importance of database accessibility for geohazard assessment and presents the basic concepts and availability of the WSM. The WSM can be applied to several key aspects of geohazard assessment, in particular the mapping of stress patterns and places of stress concentration for improved delineation of zones of seismic hazard. Furthermore, contemporary tectonic stresses can be used in combination with numerical modeling to identify faults or sections of fault systems with high failure potential and can help to predict the likely type of fault reactivation. This approach is especially valuable for assessing the likelihood of strong and rare seismic events for which probabilistic hazard assessment will fail and physically based methodologies are required. Herein, we use the Caspian-Caucasian region as an example to apply WSM data for geohazard assessment. The Caspian-Caucasian area is characterized by the occurrence of a number of stress related geohazards on different spatial scales, in particular crustal earthquakes, seismically triggered landslides and mud volcanism.

  5. RAVEN AS A TOOL FOR DYNAMIC PROBABILISTIC RISK ASSESSMENT: SOFTWARE OVERVIEW

    SciTech Connect (OSTI)

    Alfonsi Andrea; Mandelli Diego; Rabiti Cristian; Joshua Cogliati; Robert Kinoshita

    2013-05-01T23:59:59.000Z

    RAVEN is a software tool under development at the Idaho National Laboratory (INL) that acts as the control logic driver and post-processing tool for the newly developed Thermo-Hydraylic code RELAP- 7. The scope of this paper is to show the software structure of RAVEN and its utilization in connection with RELAP-7. A short overview of the mathematical framework behind the code is presented along with its main capabilities such as on-line controlling/monitoring and Monte-Carlo sampling. A demo of a Station Black Out PRA analysis of a simplified Pressurized Water Reactor (PWR) model is shown in order to demonstrate the Monte-Carlo and clustering capabilities.

  6. Modifying the Soil and Water Assessment Tool to Simulate Cropland Carbon Flux: Model Development and Initial Evaluation

    SciTech Connect (OSTI)

    Zhang, Xuesong; Izaurralde, Roberto C.; Arnold, Jeffrey; Williams, Jimmy R.; Srinivasan, Raghavan

    2013-10-01T23:59:59.000Z

    Climate change is one of the most compelling modern issues and has important implications for almost every aspect of natural and human systems. The Soil and Water Assessment Tool (SWAT) model has been applied worldwide to support sustainable land and water management in a changing climate. However, the inadequacies of the existing carbon algorithm in SWAT limit its application in assessing impacts of human activities on CO2 emission, one important source of greenhouse gases (GHGs) that traps heat in the earth system and results in global warming. In this research, we incorporate a revised version of the CENTURY carbon model into SWAT to describe dynamics of soil organic matter (SOM)- residue and simulate land-atmosphere carbon exchange.

  7. Environmental screening tools for assessment of infrastructure plans based on biodiversity preservation and global warming (PEIT, Spain)

    SciTech Connect (OSTI)

    Garcia-Montero, Luis G., E-mail: luisgonzaga.garcia@upm.e [Dept. Forest Engineering, E.T.S. Ingenieros de Montes, Technical University of Madrid (UPM), Ciudad Universitaria s/n, Madrid 28040 (Spain); Lopez, Elena, E-mail: elopez@caminos.upm.e [TRANSyT, E.T.S. Ingenieros de Caminos, Technical University of Madrid (UPM), Avda. Profesor Aranguren s/n, Madrid 28040 (Spain); Monzon, Andres, E-mail: amonzon@caminos.upm.e [TRANSyT, E.T.S. Ingenieros de Caminos, Technical University of Madrid (UPM), Avda. Profesor Aranguren s/n, Madrid 28040 (Spain); Otero Pastor, Isabel, E-mail: isabel.otero@upm.e [TRANSyT, E.T.S. Ingenieros de Caminos, Technical University of Madrid (UPM), Avda. Profesor Aranguren s/n, Madrid 28040 (Spain)

    2010-04-15T23:59:59.000Z

    Most Strategic Environmental Assessment (SEA) research has been concerned with SEA as a procedure, and there have been relatively few developments and tests of analytical methodologies. The first stage of the SEA is the 'screening', which is the process whereby a decision is taken on whether or not SEA is required for a particular programme or plan. The effectiveness of screening and SEA procedures will depend on how well the assessment fits into the planning from the early stages of the decision-making process. However, it is difficult to prepare the environmental screening for an infrastructure plan involving a whole country. To be useful, such methodologies must be fast and simple. We have developed two screening tools which would make it possible to estimate promptly the overall impact an infrastructure plan might have on biodiversity and global warming for a whole country, in order to generate planning alternatives, and to determine whether or not SEA is required for a particular infrastructure plan.

  8. ASSESSING GHG EMISSIONS FROM SLUDGE TREATMENT AND DISPOSAL ROUTES THE METHOD BEHIND GESTABOUES TOOL

    E-Print Network [OSTI]

    Boyer, Edmond

    .pradel@irstea.fr EXECUTIVE SUMMARY In 2007, 1 100 000 tons of sewage sludge were produced in France. This figure is constantly increasing and sludges have to be eliminated. Four disposal routes are currently possible: landASSESSING GHG EMISSIONS FROM SLUDGE TREATMENT AND DISPOSAL ROUTES 颅 THE METHOD BEHIND GESTABOUES

  9. Assessment of reaction-rate predictions of a collision-energy approach for chemical reactions in atmospheric flows.

    SciTech Connect (OSTI)

    Gallis, Michail A.; Bond, Ryan Bomar; Torczynski, John Robert

    2010-06-01T23:59:59.000Z

    A recently proposed approach for the Direct Simulation Monte Carlo (DSMC) method to calculate chemical-reaction rates is assessed for high-temperature atmospheric species. The new DSMC model reproduces measured equilibrium reaction rates without using any macroscopic reaction-rate information. Since it uses only molecular properties, the new model is inherently able to predict reaction rates for arbitrary non-equilibrium conditions. DSMC non-equilibrium reaction rates are compared to Park's phenomenological nonequilibrium reaction-rate model, the predominant model for hypersonic-flow-field calculations. For near-equilibrium conditions, Park's model is in good agreement with the DSMC-calculated reaction rates. For far-from-equilibrium conditions, corresponding to a typical shock layer, significant differences can be found. The DSMC predictions are also found to be in very good agreement with measured and calculated non-equilibrium reaction rates, offering strong evidence that this is a viable and reliable technique to predict chemical reaction rates.

  10. Assessment of state`s needs for building energy information tools

    SciTech Connect (OSTI)

    Hattrup, M.P.; Gilbride, T.L.

    1994-08-01T23:59:59.000Z

    In this study for the US Department of Energy (DOE) Office of Codes and Standards, Building Energy Standards Program (BESP), which is operated by the Pacific Northwest Laboratory (PNL), conducted two surveys of state agencies involved with building codes (including each state energy office) to determine what resources they would find most helpful in complying with the residential and commercial energy efficiency requirements of the Energy Policy Act of 1992. PNL conducted a telephone survey of all 50 states and then a mail survey of each state plus Washington, DC and the six trust territories. In the mail survey the survey participants were provided with a list of 27 hypothetical tool descriptions; the participants were asked to choose the tools they thought would be most useful in helping them implement building energy codes and standards in their state. The respondents were also asked to characterize their state`s commercial and/or residential building energy code development/implementation processes. The mail survey respondents were also asked if they would be interested in serving on task forces for commercial or residential code development, implementation, enforcement or utility programs.

  11. A TRANSPORTATION RISK ASSESSMENT TOOL FOR ANALYZING THE TRANSPORT OF SPENT NUCLEAR FUEL AND HIGH-LEVEL RADIOACTIVE WASTE TO THE PROPOSED YUCCA MOUNTAIN REPOSITORY

    SciTech Connect (OSTI)

    NA

    2001-02-15T23:59:59.000Z

    The Yucca Mountain Draft Environmental Impact Statement (DEIS) analysis addressed the potential for transporting spent nuclear fuel and high-level radioactive waste from 77 origins for 34 types of spent fuel and high-level radioactive waste, 49,914 legal weight truck shipments, and 10,911 rail shipments. The analysis evaluated transportation over 59,250 unique shipment links for travel outside Nevada (shipment segments in urban, suburban or rural zones by state), and 22,611 links in Nevada. In addition, the analysis modeled the behavior of 41 isotopes, 1091 source terms, and used 8850 food transfer factors (distinct factors by isotope for each state). The analysis also used mode-specific accident rates for legal weight truck, rail, and heavy haul truck by state, and barge by waterway. This complex mix of data and information required an innovative approach to assess the transportation impacts. The approach employed a Microsoft{reg_sign} Access database tool that incorporated data from many sources, including unit risk factors calculated using the RADTRAN IV transportation risk assessment computer program. Using Microsoft{reg_sign} Access, the analysts organized data (such as state-specific accident and fatality rates) into tables and developed queries to obtain the overall transportation impacts. Queries are instructions to the database describing how to use data contained in the database tables. While a query might be applied to thousands of table entries, there is only one sequence of queries that is used to calculate a particular transportation impact. For example, the incident-free dose to off-link populations in a state is calculated by a query that uses route segment lengths for each route in a state that could be used by shipments, populations for each segment, number of shipments on each segment, and an incident-free unit risk factor calculated using RADTRAN IV. In addition to providing a method for using large volumes of data in the calculations, the queries provide a straight-forward means used to verify results. Another advantage of using the MS Access database was the ability to develop query hierarchies using nested queries. Calculations were broken into a series of steps, each step represented by a query. For example, the first query might calculate the number of shipment kilometers traveled through urban, rural and suburban zones for all states. Subsequent queries could join the shipment kilometers query results with another table containing unit risk factors calculated using RADTRAN IV to produce radiological impacts. Through the use of queries, impacts by origin, mode, fuel type or many other parameters can be obtained. The paper will show both the flexibility of the assessment tool and the ease it provides for verifying results.

  12. Extratropical Lapse Rates in Very Hot Climates

    E-Print Network [OSTI]

    Zamora, Ryan Alexander

    2013-07-02T23:59:59.000Z

    circulation in progressively warmer climate states. As a tool to assess the stability of the atmosphere, we calculate a thermodynamic variable called saturation potential vorticity (P*), which has the property of being identically zero wherever lapse rates...

  13. Assessing the direction of climate interactions by means of complex networks and information theoretic tools

    E-Print Network [OSTI]

    J. Ignacio Deza; Cristina Masoller; Marcelo Barreiro

    2015-02-04T23:59:59.000Z

    An estimate of the net direction of climate interactions in different geographical regions is made by constructing a directed climate network from a regular latitude-longitude grid of nodes, using a directionality index (DI) based on conditional mutual information. Two datasets of surface air temperature anomalies - one monthly-averaged and another daily-averaged - are analyzed and compared. The network links are interpreted in terms of known atmospheric tropical and extratropical variability patterns. Specific and relevant geographical regions are selected, the net direction of propagation of the atmospheric patterns is analyzed and the direction of the inferred links is validated by recovering some well-known climate variability structures. These patterns are found to be acting at various time-scales, such as atmospheric waves in the extra-tropics or longer range events in the tropics. This analysis demonstrates the capability of the DI measure to infer the net direction of climate interactions and may contribute to improve the present understanding of climate phenomena and climate predictability. The work presented here also stands out as an application of advanced tools to the analysis of empirical, real-world data.

  14. Further examination of multiple systematic sources of variance in assessment center ratings

    E-Print Network [OSTI]

    Maldegen, Robyn Marie

    1996-01-01T23:59:59.000Z

    This study utilizes generalizability theory to examine the construct-related validity of a carefully implemented assessment center. Previous research has indicated that assessment centers do not exhibit construct-related validity. This study...

  15. An assessment of the measurement equivalence of rating sources in a multisource feedback system

    E-Print Network [OSTI]

    Sheehan, Mary Kathleen

    1999-01-01T23:59:59.000Z

    (Tornow, 1993b; Funderburg & Levy, 1997). Supporters of 360-degree feedback systems believe that each rating source provides the ratee with unique information (e. g. , Hazucha, Hezlett, & Schneider, 1993), so high levels of agreement between rating... sources are not expected. However, 360-degree feedback systems have been criticized for the low levels of agreement between rating sources, as psychometric theory states that high levels of agreement between ratings 1'rom different raters are needed...

  16. Evaluation procedure for building energy performance prediction tools: Accuracy and Home Energy Rating Systems---Issues and recommendations

    SciTech Connect (OSTI)

    Not Available

    1985-06-01T23:59:59.000Z

    This three section report explores the accuracy issues which affect Home Energy Rating Systems (HERS), briefly defined as procedures which rate the energy efficiency of single-family houses. The first section of this report reviews the problems of determining accuracy in HERS, concluding that acceptable accuracy varies with the audience and is greatly dependent upon the specific application. Section two examines the previous approaches to the determination of accuracy/validity of HERS which have predominantly relied upon primary and secondary testing methods. The final section investigates several different approaches to certify the accuracy of HERS, with the conclusion that field tests similar to those carried out in a Massachusetts HERS program be used to verify accuracy. 54 refs.

  17. Assessment of the Energy Rating of Insulated Wall Assemblies - A Step Towards Building Energy Labeling

    E-Print Network [OSTI]

    Elmahdy, H.; Maref, W.; Saber, H.; Swinton, M.; Glazer, R.

    2010-01-01T23:59:59.000Z

    Considerable efforts are recently focusing on energy labeling of components and systems in buildings. In Canada, the energy rating of windows was established, which provides a protocol to rate different types of windows with respect to their energy...

  18. Assessing the effects of ocean diffusivity and climate sensitivity on the rate of global climate change

    E-Print Network [OSTI]

    Schmittner, Andreas

    sensitivity and ocean heat uptake on the rate of future climate change. We apply a range of values for climate a significant effect on the rate of transient climate change for high values of climate sensitivity, while values of climate sensitivity and low values of ocean diffusivity. Such high rates of change could

  19. Steam System Tool Suite Introduction Guide

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    Steam System Tool Suite Introduction Guide Alternate Text Narratives and Graphic.............................................................................................................................6 Modules Steam System Scoping Tool (SSST)........................................................................................8 Steam System Assessment Tool (SSAT

  20. Assessment of Energy Storage Alternatives in the Puget Sound Energy System Volume 2: Energy Storage Evaluation Tool

    SciTech Connect (OSTI)

    Wu, Di; Jin, Chunlian; Balducci, Patrick J.; Kintner-Meyer, Michael CW

    2013-12-01T23:59:59.000Z

    This volume presents the battery storage evaluation tool developed at Pacific Northwest National Laboratory (PNNL), which is used to evaluate benefits of battery storage for multiple grid applications, including energy arbitrage, balancing service, capacity value, distribution system equipment deferral, and outage mitigation. This tool is based on the optimal control strategies to capture multiple services from a single energy storage device. In this control strategy, at each hour, a look-ahead optimization is first formulated and solved to determine battery base operating point. The minute by minute simulation is then performed to simulate the actual battery operation. This volume provide background and manual for this evaluation tool.

  1. Software-based tool path evaluation for environmental sustainability

    E-Print Network [OSTI]

    KONG, DAEYOUNG; Seungchoun Choi; Yusuke Yasui; Sushrut Pavanaskar; Dornfeld, David; Wright, Paul

    2011-01-01T23:59:59.000Z

    available life cycle assessment (LCA) tools provide only aanalyses. Life cycle assessment (LCA) is generally accepted

  2. An Energy Signature Scheme for Steam Trap Assessment and Flow Rate Estimation Using Pipe-Induced Acoustic Measurements

    SciTech Connect (OSTI)

    Olama, Mohammed M [ORNL; Allgood, Glenn O [ORNL; Kuruganti, Phani Teja [ORNL; Lake, Joe E [ORNL

    2012-01-01T23:59:59.000Z

    The US Congress has passed legislation dictating that all government agencies establish a plan and process for improving energy efficiencies at their sites. In response to this legislation, Oak Ridge National Laboratory (ORNL) has recently conducted a pilot study to explore the deployment of a wireless sensor system for a real-time measurement-based energy efficiency optimization framework within the steam distribution system within the ORNL campus. We make assessments on the real-time status of the distribution system by observing the state measurements of acoustic sensors mounted on the steam pipes/traps/valves. In this paper, we describe a spectral-based energy signature scheme that interprets acoustic vibration sensor data to estimate steam flow rates and assess steam traps health status. Experimental results show that the energy signature scheme has the potential to identify different steam trap health status and it has sufficient sensitivity to estimate steam flow rate. Moreover, results indicate a nearly quadratic relationship over the test region between the overall energy signature factor and flow rate in the pipe. The analysis based on estimated steam flow and steam trap status helps generate alerts that enable operators and maintenance personnel to take remedial action. The goal is to achieve significant energy-saving in steam lines by monitoring and acting on leaking steam pipes/traps/valves.

  3. Assessing inflow rates in atomic cooling halos: implications for direct collapse black holes

    E-Print Network [OSTI]

    Latif, M A

    2015-01-01T23:59:59.000Z

    Supermassive black holes are not only common in the present-day galaxies, but billion solar masses black holes also powered $z\\geq 6$ quasars. One efficient way to form such black holes is the collapse of a massive primordial gas cloud into a so-called direct collapse black hole. The main requirement for this scenario is the presence of large accretion rates of $\\rm \\geq 0.1~M_{\\odot}/yr$ to form a supermassive star. The prime aim of the present work is to determine how and under what conditions such accretion rates can be obtained. We perform high resolution cosmological simulations for three primordial halos of a few times $\\rm 10^7~M_{\\odot}$ illuminated by an external UV flux, $\\rm J_{21}=100-1000$. We find that a rotationally supported structure of about parsec size is assembled, with an aspect ratio between $\\rm 0.25 - 1$ depending upon the thermodynamical properties. Rotational support, however, does not halt collapse, and mass inflow rates of $\\rm \\sim 0.1~M_{\\odot}/yr$ can be obtained in the presence...

  4. The ABCD's of Texas Education: Assessing the Benefits and Costs of Reducing the Dropout Rate

    E-Print Network [OSTI]

    Alvarez, Roman; Brennan, Stephanie; Carter, Narietha; Dong, Hsiang-Kai; Eldridge, Amanda; Fratto, Joseph; Harrison, Erin; Ryder, Eleanor; Sanderson, Kathleen; Thorburn, Pamela

    2009-01-01T23:59:59.000Z

    , by State: School Year 2002-03 State or jurisd ictio n Averag ed fresh man gradu a tio n rate Regular diplo ma s , scho o l year 2002- 03 Estimated first-time 9th grad ers in 1999-2000 1 Grade 10 member sh ip , schoo l year... 2000-01 1 Grade 9 memb er sh ip , schoo l year 1999-2000 1 Grade 8 memb er sh ip , schoo l year 1998-99 1 United States (51 state s ) 73.9 2,719,947 3,682,202 3,529,652 3,986,992 3,529,963 Alabama 64.7 36,741 56,749 51,991 61,150 57...

  5. Hard Data on Soft Errors: A Large-Scale Assessment of Real-World Error Rates in GPGPU

    E-Print Network [OSTI]

    Haque, Imran S

    2009-01-01T23:59:59.000Z

    Graphics processing units (GPUs) are gaining widespread use in computational chemistry and other scientific simulation contexts because of their huge performance advantages relative to conventional CPUs. However, the reliability of GPUs in error-intolerant applications is largely unproven. In particular, a lack of error checking and correcting (ECC) capability in the memory subsystems of graphics cards has been cited as a hindrance to the acceptance of GPUs as high-performance coprocessors, but the impact of this design has not been previously quantified. In this article we present MemtestG80, our software for assessing memory error rates on NVIDIA G80 and GT200-architecture-based graphics cards. Furthermore, we present the results of a large-scale assessment of GPU error rate, conducted by running MemtestG80 on over 20,000 hosts on the Folding@home distributed computing network. Our control experiments on consumer-grade and dedicated-GPGPU hardware in a controlled environment found no errors. However, our su...

  6. Development of a Multiplexed, Bead-Based Assessment Tool for Rapid Identification and Quantitation of Microorganisms in Field Samples. Final Report

    SciTech Connect (OSTI)

    Lowe, M.; Halden, R.

    2002-10-09T23:59:59.000Z

    This was the final report for DOE NABIR grant DE-FG02-01ER63264 (PI Mary Lowe). The grant was entitled ''Development of a Multiplexed Bead-Based Assessment Tool for Rapid Identification and Quantitation of Microorganisms in Field Samples.'' The grant duration was one year. The purpose was to develop a bead-based assay for measuring analyte DNAs in environmental PCR products and to apply the method to a field experiment. The primary experiment was located at the UMTRA Old Rifle site.

  7. Development and implementation of a remote audit tool for high dose rate (HDR) Ir-192 brachytherapy using optically stimulated luminescence dosimetry

    SciTech Connect (OSTI)

    Casey, Kevin E.; Kry, Stephen F.; Howell, Rebecca M.; Followill, David [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas 77030 and The University of Texas Graduate School of Biomedical Sciences at Houston, Houston, Texas 77030 (United States)] [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas 77030 and The University of Texas Graduate School of Biomedical Sciences at Houston, Houston, Texas 77030 (United States); Alvarez, Paola; Lawyer, Ann [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas 77030 (United States)] [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas 77030 (United States)

    2013-11-15T23:59:59.000Z

    Purpose: The aim of this work was to create a mailable phantom with measurement accuracy suitable for Radiological Physics Center (RPC) audits of high dose-rate (HDR) brachytherapy sources at institutions participating in National Cancer Institute-funded cooperative clinical trials. Optically stimulated luminescence dosimeters (OSLDs) were chosen as the dosimeter to be used with the phantom.Methods: The authors designed and built an 8 8 10 cm{sup 3} prototype phantom that had two slots capable of holding Al{sub 2}O{sub 3}:C OSLDs (nanoDots; Landauer, Glenwood, IL) and a single channel capable of accepting all {sup 192}Ir HDR brachytherapy sources in current clinical use in the United States. The authors irradiated the phantom with Nucletron and Varian {sup 192}Ir HDR sources in order to determine correction factors for linearity with dose and the combined effects of irradiation energy and phantom characteristics. The phantom was then sent to eight institutions which volunteered to perform trial remote audits.Results: The linearity correction factor was k{sub L}= (?9.43 10{sup ?5} dose) + 1.009, where dose is in cGy, which differed from that determined by the RPC for the same batch of dosimeters using {sup 60}Co irradiation. Separate block correction factors were determined for current versions of both Nucletron and Varian {sup 192}Ir HDR sources and these vendor-specific correction factors differed by almost 2.6%. For the Nucletron source, the correction factor was 1.026 [95% confidence interval (CI) = 1.0231.028], and for the Varian source, it was 1.000 (95% CI = 0.9951.005). Variations in lateral source positioning up to 0.8 mm and distal/proximal source positioning up to 10 mm had minimal effect on dose measurement accuracy. The overall dose measurement uncertainty of the system was estimated to be 2.4% and 2.5% for the Nucletron and Varian sources, respectively (95% CI). This uncertainty was sufficient to establish a 5% acceptance criterion for source strength audits under a formal RPC audit program. Trial audits of four Nucletron sources and four Varian sources revealed an average RPC-to-institution dose ratio of 1.000 (standard deviation = 0.011).Conclusions: The authors have created an OSLD-based {sup 192}Ir HDR brachytherapy source remote audit tool which offers sufficient dose measurement accuracy to allow the RPC to establish a remote audit program with a 5% acceptance criterion. The feasibility of the system has been demonstrated with eight trial audits to date.

  8. Platform Li-Ion Battery Risk Assessment Tool: Cooperative Research and Development Final Report, CRADA Number CRD-10-407

    SciTech Connect (OSTI)

    Smith, K.

    2012-01-01T23:59:59.000Z

    Creare was awarded a Phase 1 STTR contract from the US Office of Naval Research, with a seven month period of performance from 6/28/2010 to 1/28/2011. The objectives of the STTR were to determine the feasibility of developing a software package for estimating reliability of battery packs, and develop a user interface to allow the designer to assess the overall impact on battery packs and host platforms for cell-level faults. NREL served as sub-tier partner to Creare, providing battery modeling and battery thermal safety expertise.

  9. The Hierarchical Rater Model for Rated Test Items and its Application to Large-Scale Educational Assessment Data

    E-Print Network [OSTI]

    -ended (or "constructed response") test items have become a standard part of the educational assessment

  10. Plant Wide Assessment of Energy Usage Utilizing SitEModelling as a Tool for Optimizing Energy Consumption

    SciTech Connect (OSTI)

    Ralf Janowsky, Ph.D.; Tracey Mole, Ph.D.

    2007-12-31T23:59:59.000Z

    The Evonik Degussa Corporation is the global market leader in the specialty chemicals industry. Innovative products and system solutions make an indispensable contribution to our customers' success. We refer to this as "creating essentials". In fiscal 2004, Degussa's 45,000 employees worldwide generated sales of 11.2 billion euros and operating profits (EBIT) of 965 million euros. Evonik Degussa Corporation has performed a plant wide energy usage assessment at the Mapleton, Illinois facility, which consumed 1,182,330 MMBTU in 2003. The purpose of this study was to identify opportunities for improvement regarding the plant抯 utility requirements specific to their operation. The production is based mainly on natural gas usage for steam, process heating and hydrogen production. The current high price for natural gas in the US is not very competitive compared to other countries. Therefore, all efforts must be taken to minimize the utility consumption in order to maximize market position and minimize fixed cost increases due to the rising costs of energy. The main objective of this plant wide assessment was to use a methodology called Site Energy Modelling (SitE Modelling) to identify areas of potential improvement for energy savings, either in implementing a single process change or in changing the way different processes interact with each other. The overall goal was to achieve energy savings of more than 10% compared to the 2003 energy figures of the Mapleton site. The final savings breakdown is provided below: - 4.1% savings for steam generation and delivery These savings were accomplished through better control schemes, more constant and optimized loading of the boilers and increased boiler efficiency through an advanced control schemes. - 1.6% savings for plant chemical processing These saving were accomplished through optimized processing heating efficiency and batch recipes, as well as an optimized production schedule to help equalize the boiler load (e.g. steam consumption).

  11. Performance evaluation of bound diamond ring tools

    SciTech Connect (OSTI)

    Piscotty, M.A.; Taylor, J.S.; Blaedel, K.L.

    1995-07-14T23:59:59.000Z

    LLNL is collaborating with the Center for Optics Manufacturing (COM) and the American Precision Optics Manufacturers Association (APOMA) to optimize bound diamond ring tools for the spherical generation of high quality optical surfaces. An important element of this work is establishing an experimentally-verified link between tooling properties and workpiece quality indicators such as roughness, subsurface damage and removal rate. In this paper, we report on a standardized methodology for assessing ring tool performance and its preliminary application to a set of commercially-available wheels. Our goals are to (1) assist optics manufacturers (users of the ring tools) in evaluating tools and in assessing their applicability for a given operation, and (2) provide performance feedback to wheel manufacturers to help optimize tooling for the optics industry. Our paper includes measurements of wheel performance for three 2-4 micron diamond bronze-bond wheels that were supplied by different manufacturers to nominally- identical specifications. Preliminary data suggests that the difference in performance levels among the wheels were small.

  12. The Hierarchical Rater Model for Rated Test Items and its Application to LargeScale Educational Assessment Data 1

    E-Print Network [OSTI]

    颅ended (or ``constructed response'') test items have become a standard part of the educational assessment

  13. Dynamic Assessment of Baroreflex Control of Heart Rate During Induction of Propofol Anesthesia Using a Point Process Method

    E-Print Network [OSTI]

    Chen, Zhe

    In this article, we present a point process method to assess dynamic baroreflex sensitivity (BRS) by estimating the baroreflex gain as focal component of a simplified closed-loop model of the cardiovascular system. ...

  14. Percussion tool

    DOE Patents [OSTI]

    Reed, Teddy R.

    2006-11-28T23:59:59.000Z

    A percussion tool is described and which includes a housing mounting a tool bit; a reciprocally moveable hammer borne by the housing and which is operable to repeatedly strike the tool bit; and a reciprocally moveable piston enclosed within the hammer and which imparts reciprocal movement to the reciprocally moveable hammer.

  15. A Field-Scale Assessment of Soil-Specific Seeding Rates to Optimize Yield Factors and Water Use in Cotton

    E-Print Network [OSTI]

    Stanislav, Scott Michael

    2011-10-21T23:59:59.000Z

    al., 2006; Ge et al., 2008). Other precision agriculture technologies in cotton, such as variable rate seeding, fertilizer, pest management, and irrigation may have a positive impact on cotton production under a site-specific management plan... the potential to reduce inputs, but equipment costs make these technologies undesirable to producers that have working systems in place (Bronson et al., 2006; Seo et al., 2008). Implementation of these precision agriculture technologies in cotton, especially...

  16. OOTW Force Design Tools

    SciTech Connect (OSTI)

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01T23:59:59.000Z

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  17. A Transportation Risk Assessment Tool for Analyzing the Transport of Spent Nuclear Fuel and High-Level Radioactive Waste to the Proposed Yucca Mountain Repository

    SciTech Connect (OSTI)

    Ralph Best; T. Winnard; S. Ross; R. Best

    2001-08-17T23:59:59.000Z

    The Yucca Mountain Transportation Database was developed as a data management tool for assembling and integrating data from multiple sources to compile the potential transportation impacts presented in the Draft Environmental Impact Statement for a Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada (DEIS). The database uses the results from existing models and codes such as RADTRAN, RISKIND, INTERLINE, and HIGHWAY to estimate transportation-related impacts of transporting spent nuclear fuel and high-level radioactive waste from commercial reactors and U. S. Department of Energy (DOE) facilities to Yucca Mountain. The source tables in the database are compendiums of information from many diverse sources including: radionuclide quantities for each waste type; route and route characteristics for rail, legal-weight truck, heavy haul. truck, and barge transport options; state-specific accident and fatality rates for routes selected for analysis; packaging and shipment data by waste type; unit risk factors; the complex behavior of the packaged waste forms in severe transport accidents; and the effects of exposure to radiation or the isotopic specific effects of radionclides should they be released in severe transportation accidents. The database works together with the codes RADTRAN (Neuhauser, et al, 1994) and RISKlND (Yuan, et al, 1995) to calculate incident-free dose and accident risk. For the incident-free transportation scenario, the database uses RADTRAN and RISKIND-generated data to calculate doses to offlink populations, onlink populations, people at stops, crews, inspectors, workers at intermodal transfer stations, guards at overnight stops, and escorts, as well as non-radioactive pollution health effects. For accident scenarios, the database uses RADTRAN-generated data to calculate dose risks based on ingestion, inhalation, resuspension, immersion (cloudshine), and groundshine as well as non-radioactive traffic fatalities. The Yucca Mountain EIS Transportation Database was developed using Microsoft Access 97{trademark} software and the Microsoft Windows NT{trademark} operating system. The database consists of tables for storing data, forms for selecting data for querying, and queries for retrieving the data in a predefined format. Database queries retrieve records based on input parameters and are used to calculate incident-free and accident doses using unit risk factors obtained from RADTRAN results. The next section briefly provides some background that led to the development of the database approach used in preparing the Yucca Mountain DEIS. Subsequent sections provide additional details on the database structure and types of impacts calculated using the database.

  18. Workflow Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at NERSC go here. Galaxy - Galaxy is a web based workflow tool that is use by the genomics community. It allows you to define job dependencies via a web based workflow engine....

  19. Queer Tools

    E-Print Network [OSTI]

    Hacker, Randi; Tsutsui, William

    2007-11-19T23:59:59.000Z

    Broadcast Transcript: Chindogu. Did someone say "Bless you?" No need. This is a Japanese word that means "queer tools" and it was coined to describe the Japanese penchant for unusual inventions. From toilet paper rolls that attach to the head...

  20. A new chemodynamical tool to study the evolution of galaxies in the local Universe: a quick and accurate numerical technique to compute gas cooling rate for any chemical composition

    E-Print Network [OSTI]

    Nicolas Champavert; Herv Wozniak

    2007-03-13T23:59:59.000Z

    We have developed a quick and accurate numerical tool to compute gas cooling whichever its chemical composition.

  1. Analytic tools for information warfare

    SciTech Connect (OSTI)

    Vandewart, R.L.; Craft, R.L.

    1996-05-01T23:59:59.000Z

    Information warfare and system surety (tradeoffs between system functionality, security, safety, reliability, cost, usability) have many mechanisms in common. Sandia`s experience has shown that an information system must be assessed from a {ital system} perspective in order to adequately identify and mitigate the risks present in the system. While some tools are available to help in this work, the process is largely manual. An integrated, extensible set of assessment tools would help the surety analyst. This paper describes one approach to surety assessment used at Sandia, identifies the difficulties in this process, and proposes a set of features desirable in an automated environment to support this process.

  2. Research Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest RegionatSearch Welcome toResearch Areas OurLANLSoftware & Tools

  3. Tools | JCESR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest RegionatSearchScheduled System BurstLongTitan Titan is a two-beamTools JCESR

  4. Enrollment Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4: Networking for37EnergyNuclear SecurityEnolEnrollment Tools

  5. BEopt Optimization Tool and National Residential Efficiency Measures...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    drawing tool * Detailed utility rates * PV compensation * PVefficiency incentives * Demand response * HPXML export * Schedule wizard * Output visualization * Batch...

  6. Development of a HT seismic downhole tool.

    SciTech Connect (OSTI)

    Maldonado, Frank P.; Greving, Jeffrey J.; Henfling, Joseph Anthony; Chavira, David J.; Uhl, James Eugene; Polsky, Yarom

    2009-06-01T23:59:59.000Z

    Enhanced Geothermal Systems (EGS) require the stimulation of the drilled well, likely through hydraulic fracturing. Whether fracturing of the rock occurs by shear destabilization of natural fractures or by extensional failure of weaker zones, control of the fracture process will be required to create the flow paths necessary for effective heat mining. As such, microseismic monitoring provides one method for real-time mapping of the fractures created during the hydraulic fracturing process. This monitoring is necessary to help assess stimulation effectiveness and provide the information necessary to properly create the reservoir. In addition, reservoir monitoring of the microseismic activity can provide information on reservoir performance and evolution over time. To our knowledge, no seismic tool exists that will operate above 125 C for the long monitoring durations that may be necessary. Replacing failed tools is costly and introduces potential errors such as depth variance, etc. Sandia has designed a high temperature seismic tool for long-term deployment in geothermal applications. It is capable of detecting microseismic events and operating continuously at temperatures up to 240 C. This project includes the design and fabrication of two High Temperature (HT) seismic tools that will have the capability to operate in both temporary and long-term monitoring modes. To ensure the developed tool meets industry requirements for high sampling rates (>2ksps) and high resolution (24-bit Analog-to-Digital Converter) two electronic designs will be implemented. One electronic design will utilize newly developed 200 C electronic components. The other design will use qualified Silicon-on-Insulator (SOI) devices and will have a continuous operating temperature of 240 C.

  7. FIT for Use Everywhere? Assessing Experiences With Renewable...

    Open Energy Info (EERE)

    FIT for Use Everywhere? Assessing Experiences With Renewable Energy Feed-In Tariffs Jump to: navigation, search Tool Summary LAUNCH TOOL Name: FIT for Use Everywhere? Assessing...

  8. Assess in-depth contributions of selected scenarios to goals...

    Open Energy Info (EERE)

    Resource Assessment (SWERA) SolarDS Stochastic Energy Deployment System (SEDS) System Advisor Model (SAM) Tool for Rapid Assessment of City Energy (TRACE) UNDP-Energy Costing Tool...

  9. Policy Flash 2014-19 Electronic Products Environmental Assessment...

    Broader source: Energy.gov (indexed) [DOE]

    19 Electronic Products Environmental Assessment Tool (EPEAT) Policy Flash 2014-19 Electronic Products Environmental Assessment Tool (EPEAT) Questions concerning this policy flash...

  10. Meier associates and Pacific Northwest Laboratory staff exchange: Transfer of corrosion monitoring expertise to assess and develop in-line inspection tools for corrosion control

    SciTech Connect (OSTI)

    Olson, N.J. [Pacific Northwest Lab., Richland, WA (United States); Meier, T.E. [Meier Associates, Inc., Kennewick, WA (United States)

    1995-04-01T23:59:59.000Z

    Staff exchanges, such as the one described in this report, are intended to facilitate communication and collaboration among scientists and engineers at DOE laboratories, in US industry, and academia. During the past 5 years, PNL has developed prototype instrumentation to automate the data collection required for electrochemical determination of corrosion rates and behavior of materials in various electrically conductive environments. The last version is labeled the Sentry 100 prototype corrosion data scanner. Applications include these in the pulp and paper industry and at hazardous waste sites.

  11. Condition Data Aggregation with Application to Failure Rate Calculation of Power Transformers

    E-Print Network [OSTI]

    be used in system-level simulation and decision tools. The system is illustrated using dis- solved gas-in-oil for condition monitoring and failure rate prediction of power transformers. Specif- ically, the system uses field data for assessing the deteriora- tion level of power transformer insulating oil. Keywords: Data

  12. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, J.M.

    1984-01-01T23:59:59.000Z

    The present invention is directed to a method for machine optical quality finishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  13. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, John M. (Greenville, TX)

    1986-01-01T23:59:59.000Z

    The present invention is directed to a method for machining optical quality inishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  14. Enhanced Chemical Incident Response Plan (ECIRP). Appendix F, remediation analysis with Decision Support Tools (DSTs) for wide-area chemical hazards.

    SciTech Connect (OSTI)

    Hassig, Nancy L. (Pacific Northwest National Laboratory, Richland, WA); Pulsipher, Brent A. (Pacific Northwest National Laboratory, Richland, WA); Foltz, Greg W.; Hoette, Trisha Marie

    2011-07-01T23:59:59.000Z

    The Defense Threat Reduction Agency (DTRA) commissioned an assessment of the Consequence Management (CM) plans in place on military bases for response to a chemical attack. The effectiveness of the CM plans for recovering from chemical incidents was modeled using a multiple Decision Support Tools (DSTs). First, a scenario was developed based on an aerial dispersion of a chemical agent over a wide-area of land. The extent of contamination was modeled with the Hazard Prediction and Assessment Capability (HPAC) tool. Subsequently, the Analyzer for Wide Area Restoration Effectiveness (AWARE) tool was used to estimate the cost and time demands for remediation based on input of contamination maps, sampling and decontamination resources, strategies, rates and costs. The sampling strategies incorporated in the calculation were designed using the Visual Sample Plan (VSP) tool. Based on a gaps assessment and the DST remediation analysis, an Enhanced Chemical Incident Response Plan (ECIRP) was developed.

  15. The power tool

    SciTech Connect (OSTI)

    HAYFIELD, J.P.

    1999-02-01T23:59:59.000Z

    POWER Tool--Planning, Optimization, Waste Estimating and Resourcing tool, a hand-held field estimating unit and relational database software tool for optimizing disassembly and final waste form of contaminated systems and equipment.

  16. TNA Data Collection Tool

    Broader source: Energy.gov [DOE]

    The TNA Data Collection Tool Instructions provides guidance on how to complete the TNA Data Collection Tool. The TNA Data Collection Tool is an Excel spreadsheet that the organization's designating training POC will use to populate their organizations training needs.

  17. Pumping System Assessment Tool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of pumping system operations. PSAT uses achievable pump performance data from Hydraulic Institute standards and motor performance data from the MotorMaster+ database to...

  18. Crucial Habitat Assessment Tool | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:EnergyWisconsin:2003)Crowley County, Colorado: Energy ResourcesCrucial Habitat

  19. PECIAL REPORS T Tool Created to Assess

    E-Print Network [OSTI]

    in physical activity, which increases the risk for obesity, diabetes, and heart disease. A 20032004 survey. Obesity exceeds 20%, and diabetes is the seventh leading cause of death. Nation ally, 20032004 data show

  20. Fan System Assessment Tool Introduction - Webcast

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat PumpRecord ofESPCofConstructionofFYOxideof EnergyFactDepartmentFact Sheet

  1. Fan System Assessment Tool | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomentheATLANTA, GA5 &ofDepartment of Energy On

  2. Pumping System Assessment Tool | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists' Research | DepartmentDepartment ofThermoChemJanuaryPumping-Self Schedulers

  3. NREL: International Activities - Assessments and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions and Achievements ofLiz TorresSolectriaProjectsInternal NREL

  4. Argonne National Laboratory Launches Bioenergy Assessment Tools |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd: Scope Change #1 |MarketingVI,ProgramGo to "Insert (View)

  5. Assessment tool for nuclear material acquisition pathways

    E-Print Network [OSTI]

    Ford, David Grant

    2009-05-15T23:59:59.000Z

    be obtained. The two types of material used in nuclear weapons are Highly Enriched Uranium (HEU) and Plutonium (Pu). Uranium is an element found in nature and is contained in the soil all over the world. However, certain geological formations contain a... (LEU) portion of the network ..................................... 22 Figure 11 Last seciton of the Pu (LEU) portion of the network...................................... 23 Figure 12 Plutonium Section of the Network produced via Natural Uranium...

  6. Rate Schedules

    Broader source: Energy.gov [DOE]

    One of the major responsibilities of Southeastern is to design, formulate, and justify rate schedules. Repayment studies prepared by the agency determine revenue requirements and appropriate rate...

  7. Improving Dynamic Load and Generator Response PerformanceTools

    SciTech Connect (OSTI)

    Lesieutre, Bernard C.

    2005-11-01T23:59:59.000Z

    This report is a scoping study to examine research opportunities to improve the accuracy of the system dynamic load and generator models, data and performance assessment tools used by CAISO operations engineers and planning engineers, as well as those used by their counterparts at the California utilities, to establish safe operating margins. Model-based simulations are commonly used to assess the impact of credible contingencies in order to determine system operating limits (path ratings, etc.) to ensure compliance with NERC and WECC reliability requirements. Improved models and a better understanding of the impact of uncertainties in these models will increase the reliability of grid operations by allowing operators to more accurately study system voltage problems and the dynamic stability response of the system to disturbances.

  8. PHYLOGENOMICS AND POPULATION GENOMICS: MODDELS, ALGORITHMS, AND ANALYTICAL TOOLS

    E-Print Network [OSTI]

    Rosenberg, Noah

    PHYLOGENOMICS AND POPULATION GENOMICS: MODDELS, ALGORITHMS, AND ANALYTICAL TOOLS LUAY K. NAKHLEH on relationships among species themselves. The two fields share a number of overlapping tools, as well as similar analytical tools for assessing properties of the algorithms. We are pleased to present five papers

  9. Introducing SHRP2's Economic Impact Estimator / Sketch Planning Tool -

    E-Print Network [OSTI]

    Minnesota, University of

    Introducing SHRP2's Economic Impact Estimator / Sketch Planning Tool - Transportation Project-PICS) is a web- based tool that allows the user to gather useful information on the potential economic impacts. 路 "My Project Tools" module allows preliminary assessment of potential economic impacts (jobs, wages

  10. Energy Rating

    E-Print Network [OSTI]

    Cabec Conference; Rashid Mir P. E

    2009-01-01T23:59:59.000Z

    Consistent, accurate, and uniform ratings based on a single statewide rating scale Reasonable estimates of potential utility bill savings and reliable recommendations on cost-effective measures to improve energy efficiency Training and certification procedures for home raters and quality assurance procedures to promote accurate ratings and to protect consumers Labeling procedures that will meet the needs of home buyers, homeowners, renters, the real estate industry, and mortgage lenders with an interest in home energy ratings

  11. Assessment of High Rates of Precocious Male Maturation in a Spring Chinook Salmon Supplementation Hatchery Program, Annual Report 2002-2003.

    SciTech Connect (OSTI)

    Larsen, Donald; Beckman, Brian; Cooper, Kathleen

    2003-08-01T23:59:59.000Z

    The Yakima River Spring Chinook Salmon Supplementation Project in Washington State is currently one of the most ambitious efforts to enhance a natural salmon population in the United States. Over the past five years we have conducted research to characterize the developmental physiology of naturally- and hatchery-reared wild progeny spring chinook salmon (Oncorhynchus tshawytscha) in the Yakima River basin. Fish were sampled at the main hatchery in Cle Elum, at remote acclimation sites and, during smolt migration, at downstream dams. Throughout these studies the maturational state of all fish was characterized using combinations of visual and histological analysis of testes, gonadosomatic index (GSI), and measurement of plasma 11-ketotestosterone (11-KT). We established that a plasma 11-KT threshold of 0.8 ng/ml could be used to designate male fish as either immature or precociously maturing approximately 8 months prior to final maturation (1-2 months prior to release as 'smolts'). Our analyses revealed that 37-49% of the hatchery-reared males from this program undergo precocious maturation at 2 years of age and a proportion of these fish appear to residualize in the upper Yakima River basin throughout the summer. An unnaturally high incidence of precocious male maturation may result in loss of potential returning anadromous adults, skewing of female: male sex ratios, ecological, and genetic impacts on wild populations and other native species. Precocious male maturation is significantly influenced by growth rate at specific times of year and future studies will be conducted to alter maturation rates through seasonal growth rate manipulations.

  12. DOE ER63951-3 Final Report: An Integrated Assessment of Geochemical and Community Structure Determinants of Metal Reduction Rates in Subsurface Sediments

    SciTech Connect (OSTI)

    Susan Pfiffner

    2010-06-28T23:59:59.000Z

    The objective of this research was to examine the importance of microbial community structure in influencing uranium reduction rates in subsurface sediments. If the redox state alone is the key to metal reduction, then any organisms that can utilize the oxygen and nitrate in the subsurface can change the geochemical conditions so metal reduction becomes an energetically favored reaction. Thus, community structure would not be critical in determining rates or extent of metal reduction unless community structure influenced the rate of change in redox. Alternatively, some microbes may directly catalyze metal reduction (e.g., specifically reduce U). In this case the composition of the community may be more important and specific types of electron donors may promote the production of communities that are more adept at U reduction. Our results helped determine if the type of electron donor or the preexisting community is important in the bioremediation of metal-contaminated environments subjected to biostimulation. In a series of experiments at the DOE FRC site in Oak Ridge we have consistently shown that all substrates promoted nitrate reduction, while glucose, ethanol, and acetate always promoted U reduction. Methanol only occasionally promoted extensive U reduction which is possibly due to community heterogeneity. There appeared to be limitations imposed on the community related to some substrates (e.g. methanol and pyruvate). Membrane lipid analyses (phospholipids and respiratory quinones) indicated different communities depending on electron donor used. Terminal restriction fragment length polymorphism and clone libraries indicated distinct differences among communities even in treatments that promoted U reduction. Thus, there was enough metabolic diversity to accommodate many different electron donors resulting in the U bioimmobilization.

  13. Groundwater Resources Assessment under the Pressures of Humanity...

    Open Energy Info (EERE)

    under the Pressures of Humanity and Climate Change (GRAPHIC) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Groundwater Resources Assessment under the Pressures of...

  14. Development of Sea Level Rise Scenarios for Climate Change Assessments...

    Open Energy Info (EERE)

    Sea Level Rise Scenarios for Climate Change Assessments of the Mekong Delta, Vietnam Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Development of Sea Level Rise...

  15. Solar and Wind Energy Resource Assessment Programme's Renewable...

    Open Energy Info (EERE)

    Energy Resource Explorer Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Solar and Wind Energy Resource Assessment Programme's Renewable Energy Resource Explorer...

  16. Assessment of Uncertainty in Cloud Radiative Effects and Heating Rates through Retrieval Algorithm Differences: Analysis using 3-years of ARM data at Darwin, Australia

    SciTech Connect (OSTI)

    Comstock, Jennifer M.; Protat, Alain; McFarlane, Sally A.; Delanoe, Julien; Deng, Min

    2013-05-22T23:59:59.000Z

    Ground-based radar and lidar observations obtained at the Department of Energy抯 Atmospheric Radiation Measurement Program抯 Tropical Western Pacific site located in Darwin, Australia are used to retrieve ice cloud properties in anvil and cirrus clouds. Cloud microphysical properties derived from four different retrieval algorithms (two radar-lidar and two radar only algorithms) are compared by examining mean profiles and probability density functions of effective radius (Re), ice water content (IWC), extinction, ice number concentration, ice crystal fall speed, and vertical air velocity. Retrieval algorithm uncertainty is quantified using radiative flux closure exercises. The effect of uncertainty in retrieved quantities on the cloud radiative effect and radiative heating rates are presented. Our analysis shows that IWC compares well among algorithms, but Re shows significant discrepancies, which is attributed primarily to assumptions of particle shape. Uncertainty in Re and IWC translates into sometimes-large differences in cloud radiative effect (CRE) though the majority of cases have a CRE difference of roughly 10 W m-2 on average. These differences, which we believe are primarily driven by the uncertainty in Re, can cause up to 2 K/day difference in the radiative heating rates between algorithms.

  17. Applications (Grid Tools)

    E-Print Network [OSTI]

    Buyya, Rajkumar

    Grid Fabric Software Grid Applications Core Grid Middleware User-Level Middleware (Grid Tools) !"# $ %& ' ( ) * #& + '& ' , - . / # ) ) 0 # * 1 PDB CDB Grid Fabric Hardware &+ '' + ) , '1 '1 ' % - * # ( Grid Fabric Software Grid Applications Core Grid Middleware User-Level Middleware (Grid Tools) !"# $ %& ' ( ) * #& + '& ' , - . / # ) ) 0

  18. OOTW COST TOOLS

    SciTech Connect (OSTI)

    HARTLEY, D.S.III; PACKARD, S.L.

    1998-09-01T23:59:59.000Z

    This document reports the results of a study of cost tools to support the analysis of Operations Other Than War (OOTW). It recommends the continued development of the Department of Defense (DoD) Contingency Operational Support Tool (COST) as the basic cost analysis tool for 00TWS. It also recommends modifications to be included in future versions of COST and the development of an 00TW mission planning tool to supply valid input for costing.

  19. U.S. Department of Energy Project Definition Rating Index Guide

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-07-22T23:59:59.000Z

    This Guide assists individuals and teams involved in conducting assessments of project definition (i.e., how well front-end planning has been conducted to define project scope) using a numerical project management tool developed by the Construction Industry Institute (CII), tailored for DOE use. Called the Project Definition Rating Index (PDRI), the PDRI is a simple but powerful tool that facilitates the measurement of the degree of scope definition for completeness for traditional construction projects, both nuclear and non-nuclear. No cancellations.

  20. Development of a tool dedicated to the evaluation of hydrogen term source for technological Wastes: assumptions, physical models, and validation

    SciTech Connect (OSTI)

    Lamouroux, C. [CEA Saclay, Nuclear Energy Division /DANS, Department of physico-chemistry, 91191 Gif sur yvette (France); Esnouf, S. [CEA Saclay, DSM/IRAMIS/SIS2M/Radiolysis Laboratory , 91191 Gif sur yvette (France); Cochin, F. [Areva NC,recycling BU, DIRP/RDP tour Areva, 92084 Paris La Defense (France)

    2013-07-01T23:59:59.000Z

    In radioactive waste packages hydrogen is generated, in one hand, from the radiolysis of wastes (mainly organic materials) and, in the other hand, from the radiolysis of water content in the cement matrix. In order to assess hydrogen generation 2 tools based on operational models have been developed. One is dedicated to the determination of the hydrogen source term issues from the radiolysis of the wastes: the STORAGE tool (Simulation Tool Of Emission Radiolysis Gas), the other deals with the hydrogen source term gas, produced by radiolysis of the cement matrices (the Damar tool). The approach used by the STORAGE tool for assessing the production rate of radiolysis gases is divided into five steps: 1) Specification of the data packages, in particular, inventories and radiological materials defined for a package medium; 2) Determination of radiochemical yields for the different constituents and the laws of behavior associated, this determination of radiochemical yields is made from the PRELOG database in which radiochemical yields in different irradiation conditions have been compiled; 3) Definition of hypothesis concerning the composition and the distribution of contamination inside the package to allow assessment of the power absorbed by the constituents; 4) Sum-up of all the contributions; And finally, 5) validation calculations by comparison with a reduced sampling of packages. Comparisons with measured values confirm the conservative character of the methodology and give confidence in the safety margins for safety analysis report.

  1. Built Environment Energy Analysis Tool Overview (Presentation)

    SciTech Connect (OSTI)

    Porter, C.

    2013-04-01T23:59:59.000Z

    This presentation provides an overview of the Built Environment Energy Analysis Tool, which is designed to assess impacts of future land use/built environment patterns on transportation-related energy use and greenhouse gas (GHG) emissions. The tool can be used to evaluate a range of population distribution and urban design scenarios for 2030 and 2050. This tool was produced as part of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

  2. Estimates of future regional heavy oil production at three production rates--background information for assessing effects in the US refining industry

    SciTech Connect (OSTI)

    Olsen, D.K.

    1993-07-01T23:59:59.000Z

    This report is one of a series of publications from a project considering the feasibility of increasing domestic heavy oil (10{degree} to 20{degree} API gravity inclusive) production being conducted for the US Department of Energy. The report includes projections of future heavy oil production at three production levels: 900,000; 500,000; and 300,000 BOPD above the current 1992 heavy oil production level of 750,000 BOPD. These free market scenario projections include time frames and locations. Production projections through a second scenario were developed to examine which heavy oil areas would be developed if significant changes in the US petroleum industry occurred. The production data helps to define the possible constraints (impact) of increased heavy oil production on the US refining industry (the subject of a future report). Constraints include a low oil price and low rate of return. Heavy oil has high production, transportation, and refining cost per barrel as compared to light oil. The resource is known, but the right mix of technology and investment is required to bring about significant expansion of heavy oil production in the US.

  3. Wachs Cutter Tooling Station (4495)

    Broader source: Energy.gov (indexed) [DOE]

    purchase, build and install Wachs cutter tooling. The Wachs Cutter Tooling Station is similar to previously operated facility tooling and will utilize an existing hydraulic unit....

  4. Machine tool locator

    DOE Patents [OSTI]

    Hanlon, John A. (Los Alamos, NM); Gill, Timothy J. (Stanley, NM)

    2001-01-01T23:59:59.000Z

    Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

  5. Certification Status Search Tool

    E-Print Network [OSTI]

    Certification Status Search Tool (SB/DVBE) Illustrated User Manual #12;2 Certification Status Search Tool (SB/DVBE) Rev. 5/14/09 Copyright 漏 2008 RFP Depot, LLC dba BidSync All Rights Reserved://www.bidsync.com #12;3 Certification Status Search Tool (SB/DVBE) Rev. 5/14/09 Introduction BidSync is a powerful e

  6. BlackboardSectioningTool Course Sectioning The Sectioning Tool

    E-Print Network [OSTI]

    Bou-Zeid, Elie

    sectioning tool: Consult the online help provided within the sectioning tool Call the OIT Help Desk at (609 by those preferences, select Enable/Configure Student Preference Tool. Need help using the BlackboardBlackboardSectioningTool Course Sectioning 1 The Sectioning Tool The Sectioning Tool is a course

  7. Training Needs Assessment Presentation

    Broader source: Energy.gov [DOE]

    The TNA PowerPoint Presentation is targeted for the training points of contacts whose organization's participate in the DOE training needs assessment (TNA). This presentation goes over how the training needs assessment (TNA) is done and the components of the TNA data collection tool.

  8. Manifold tool guide

    DOE Patents [OSTI]

    Djordjevic, A.

    1983-12-27T23:59:59.000Z

    A tool guide is described that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into the cross pipe for cleaning, inspection, etc. 3 figs.

  9. Manifold tool guide

    DOE Patents [OSTI]

    Djordjevic, A.

    1982-07-08T23:59:59.000Z

    A tool guide that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into to cross pipe for cleaning, inspection, etc.

  10. Manifold tool guide

    DOE Patents [OSTI]

    Djordjevic, Aleksandar (Thousand Oaks, CA)

    1983-12-27T23:59:59.000Z

    A tool guide that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into to cross pipe for cleaning, inspection, etc.

  11. Wireline logging tool catalog

    SciTech Connect (OSTI)

    Verdier, M.

    1986-01-01T23:59:59.000Z

    This book provides discussions on wireline logging tools. The contents are resistivity, radioactivity, acoustic, formation dip and borehold geometry, formation sampling, and auxiliary services.

  12. Data Center IT Equipment Energy Assessment Tools Current State of Commercial Tools, Proposal for a Future Set of Assessment Tools

    E-Print Network [OSTI]

    Radhakrishnan, Ben D.

    2014-01-01T23:59:59.000Z

    usage, and optimize operations through identification, and implementation of energy efficiency (EE) measures using the latest technology.

  13. Fluid sampling tool

    DOE Patents [OSTI]

    Johnston, Roger G. (Los Alamos, NM); Garcia, Anthony R. E. (Espanola, NM); Martinez, Ronald K. (Santa Cruz, NM)

    2001-09-25T23:59:59.000Z

    The invention includes a rotatable tool for collecting fluid through the wall of a container. The tool includes a fluid collection section with a cylindrical shank having an end portion for drilling a hole in the container wall when the tool is rotated, and a threaded portion for tapping the hole in the container wall. A passageway in the shank in communication with at least one radial inlet hole in the drilling end and an opening at the end of the shank is adapted to receive fluid from the container. The tool also includes a cylindrical chamber affixed to the end of the shank opposite to the drilling portion thereof for receiving and storing fluid passing through the passageway. The tool also includes a flexible, deformable gasket that provides a fluid-tight chamber to confine kerf generated during the drilling and tapping of the hole. The invention also includes a fluid extractor section for extracting fluid samples from the fluid collecting section.

  14. Rate design is the no. 1 energy efficiency tool

    SciTech Connect (OSTI)

    Parmesano, Hethie

    2007-07-15T23:59:59.000Z

    It is one thing to understand the theory of efficient pricing and another thing to actually implement it. However, the job is getting easier, as wholesale markets simplify the task of estimating marginal generation and transmission costs, advanced metering infrastructure makes time-varying pricing feasible, and the industry recognizes the value of straightforward, easy-to-understand prices. (author)

  15. Sandia National Laboratories: ramp-rate mitigation tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1developmentturbine bladelifetimepower-to-gasproduceradiation waste cleanup

  16. Tools used for hand deburring

    SciTech Connect (OSTI)

    Gillespie, L.K.

    1981-03-01T23:59:59.000Z

    This guide is designed to help in quick identification of those tools most commonly used to deburr hand size or smaller parts. Photographs and textual descriptions are used to provide rapid yet detailed information. The data presented include the Bendix Kansas City Division coded tool number, tool description, tool crib in which the tool can be found, the maximum and minimum inventory requirements, the cost of each tool, and the number of the illustration that shows the tool.

  17. A Review of Quantitative Approaches to Intelligent Building Assessment

    E-Print Network [OSTI]

    Chen, Z.; Clements-Croome, D. J.; Hong, J.; Li, H.; Xu, Q.

    2006-01-01T23:59:59.000Z

    This paper provides a review of the assessment methods of intelligent buildings (IBs). Based on a review of rating method currently used for building assessment, 6 rating systems for IB assessment are compared according to assessment clusters...

  18. The COSI Tool -Carbon Offsets with SD Impacts (COSI)

    E-Print Network [OSTI]

    The COSI Tool - Carbon Offsets with SD Impacts (COSI) Fifth Meeting of the Development Dividend is to develop one, unified international standard for SD assessment (distinguishing 'gourmet offsets') rather

  19. GARNET : a Graphical Attack graph and Reachability Network Evaluation Tool

    E-Print Network [OSTI]

    Williams, Leevar (Leevar Christoff)

    2008-01-01T23:59:59.000Z

    Attack graphs are valuable tools in the assessment of network security, revealing potential attack paths an adversary could use to gain control of network assets. Creating an effective visualization for attack graphs is ...

  20. Framework for Selecting Leading Performance Tools for Achieving Leed 3.0 Credits

    E-Print Network [OSTI]

    Pathak, Rutuparna

    2010-10-12T23:59:59.000Z

    . Performance evaluation tools Performance evaluation tools provide quantitative performance indicators for various design alternatives (Ding 2007). Performance evaluation tools include life-cycle impact assessment, new technology assessment tools used... reports. Table for energy related features included in design. C1 Optimize Energy Performance Calculate baseline building energy performance using computer simulation model C2 On-Site Renewable Energy Express energy produced by renewable energy...

  1. Friction stir welding tool

    DOE Patents [OSTI]

    Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Barnes, Timothy A. (Ammon, ID)

    2008-04-15T23:59:59.000Z

    A friction stir welding tool is described and which includes a shank portion; a shoulder portion which is releasably engageable with the shank portion; and a pin which is releasably engageable with the shoulder portion.

  2. Sandia Modeling Tool Webinar

    Broader source: Energy.gov [DOE]

    Hosted by the Energy Department and Western Area Power Administration, this webinar will show attendees about what collaborative, stakeholder-driven modeling is and how the modeling tools and process developed by Sandia can be used in Indian Country.

  3. Smart tool holder

    DOE Patents [OSTI]

    Day, Robert Dean (Los Alamos, NM); Foreman, Larry R. (Los Alamos, NM); Hatch, Douglas J. (Los Alamos, NM); Meadows, Mark S. (Boston, MA)

    1998-01-01T23:59:59.000Z

    There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut.

  4. UNIX Public Tools

    Broader source: Energy.gov [DOE]

    SATAN, the System Administrator Tool for Analyzing Networks, is a network security analyzer designed by燚an Farmer燼nd Wietse Venema. SATAN scans systems connected to the network noting the...

  5. Minds, Brains and Tools

    E-Print Network [OSTI]

    Clark, Andy

    2002-01-01T23:59:59.000Z

    The selected texts for this discussion were two recent pieces by Dennett (揟hings About Things and 揗aking Tools for Thinking henceforth TAT and MTT respectively) and one oldie-but-goodie (揝tyles of Mental Representation, ...

  6. Commercial Building Energy Asset Rating Program -- Market Research

    SciTech Connect (OSTI)

    McCabe, Molly J.; Wang, Na

    2012-04-19T23:59:59.000Z

    Under contract to Pacific Northwest National Laboratory, HaydenTanner, LLC conducted an in-depth analysis of the potential market value of a commercial building energy asset rating program for the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy. The market research objectives were to: (1) Evaluate market interest and need for a program and tool to offer asset rating and rapidly identify potential energy efficiency measures for the commercial building sector. (2) Identify key input variables and asset rating outputs that would facilitate increased investment in energy efficiency. (3) Assess best practices and lessons learned from existing national and international energy rating programs. (4) Identify core messaging to motivate owners, investors, financiers, and others in the real estate sector to adopt a voluntary asset rating program and, as a consequence, deploy high-performance strategies and technologies across new and existing buildings. (5) Identify leverage factors and incentives that facilitate increased investment in these buildings. To meet these objectives, work consisted of a review of the relevant literature, examination of existing and emergent asset and operational rating systems, interviews with industry stakeholders, and an evaluation of the value implication of an asset label on asset valuation. This report documents the analysis methodology and findings, conclusion, and recommendations. Its intent is to support and inform the DOE Office of Energy Efficiency and Renewable Energy on the market need and potential value impacts of an asset labeling and diagnostic tool to encourage high-performance new buildings and building efficiency retrofit projects.

  7. Rate schedule

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor. |INCIDENCET3PACI-T3Rate

  8. SUSTAINABLE REMEDIATION SOFTWARE TOOL EXERCISE AND EVALUATION

    SciTech Connect (OSTI)

    Kohn, J.; Nichols, R.; Looney, B.

    2011-05-12T23:59:59.000Z

    The goal of this study was to examine two different software tools designed to account for the environmental impacts of remediation projects. Three case studies from the Savannah River Site (SRS) near Aiken, SC were used to exercise SiteWise (SW) and Sustainable Remediation Tool (SRT) by including both traditional and novel remediation techniques, contaminants, and contaminated media. This study combined retrospective analysis of implemented projects with prospective analysis of options that were not implemented. Input data were derived from engineering plans, project reports, and planning documents with a few factors supplied from calculations based on Life Cycle Assessment (LCA). Conclusions drawn from software output were generally consistent within a tool; both tools identified the same remediation options as the 'best' for a given site. Magnitudes of impacts varied between the two tools, and it was not always possible to identify the source of the disagreement. The tools differed in their quantitative approaches: SRT based impacts on specific contaminants, media, and site geometry and modeled contaminant removal. SW based impacts on processes and equipment instead of chemical modeling. While SW was able to handle greater variety in remediation scenarios, it did not include a measure of the effectiveness of the scenario.

  9. Reduce NOx and Improve Energy Efficiency, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01T23:59:59.000Z

    This fact sheet describes how the Industrial Technologies Program NOx and Energy Assessment Tool (NxEAT) can help petroleum refining and chemical plants improve energy efficiency.

  10. Automated Steel Cleanliness Analysis Tool (ASCAT)

    SciTech Connect (OSTI)

    Gary Casuccio (RJ Lee Group); Michael Potter (RJ Lee Group); Fred Schwerer (RJ Lee Group); Dr. Richard J. Fruehan (Carnegie Mellon University); Dr. Scott Story (US Steel)

    2005-12-30T23:59:59.000Z

    The objective of this study was to develop the Automated Steel Cleanliness Analysis Tool (ASCATTM) to permit steelmakers to evaluate the quality of the steel through the analysis of individual inclusions. By characterizing individual inclusions, determinations can be made as to the cleanliness of the steel. Understanding the complicating effects of inclusions in the steelmaking process and on the resulting properties of steel allows the steel producer to increase throughput, better control the process, reduce remelts, and improve the quality of the product. The ASCAT (Figure 1) is a steel-smart inclusion analysis tool developed around a customized next-generation computer controlled scanning electron microscopy (NG-CCSEM) hardware platform that permits acquisition of inclusion size and composition data at a rate never before possible in SEM-based instruments. With built-in customized ''intelligent'' software, the inclusion data is automatically sorted into clusters representing different inclusion types to define the characteristics of a particular heat (Figure 2). The ASCAT represents an innovative new tool for the collection of statistically meaningful data on inclusions, and provides a means of understanding the complicated effects of inclusions in the steel making process and on the resulting properties of steel. Research conducted by RJLG with AISI (American Iron and Steel Institute) and SMA (Steel Manufactures of America) members indicates that the ASCAT has application in high-grade bar, sheet, plate, tin products, pipes, SBQ, tire cord, welding rod, and specialty steels and alloys where control of inclusions, whether natural or engineered, are crucial to their specification for a given end-use. Example applications include castability of calcium treated steel; interstitial free (IF) degasser grade slag conditioning practice; tundish clogging and erosion minimization; degasser circulation and optimization; quality assessment/steel cleanliness; slab, billet or bloom disposition; and alloy development. Additional benefits of ASCAT include the identification of inclusions that tend to clog nozzles or interact with refractory materials. Several papers outlining the benefits of the ASCAT have been presented and published in the literature. The paper entitled ''Inclusion Analysis to Predict Casting Behavior'' was awarded the American Iron and Steel Institute (AISI) Medal in 2004 for special merit and importance to the steel industry. The ASCAT represents a quantum leap in inclusion analysis and will allow steel producers to evaluate the quality of steel and implement appropriate process improvements. In terms of performance, the ASCAT (1) allows for accurate classification of inclusions by chemistry and morphological parameters, (2) can characterize hundreds of inclusions within minutes, (3) is easy to use (does not require experts), (4) is robust, and (5) has excellent image quality for conventional SEM investigations (e.g., the ASCAT can be utilized as a dual use instrument). In summary, the ASCAT will significantly advance the tools of the industry and addresses an urgent and broadly recognized need of the steel industry. Commercialization of the ASCAT will focus on (1) a sales strategy that leverages our Industry Partners; (2) use of ''technical selling'' through papers and seminars; (3) leveraging RJ Lee Group's consulting services, and packaging of the product with a extensive consulting and training program; (4) partnering with established SEM distributors; (5) establishing relationships with professional organizations associated with the steel industry; and (6) an individualized plant by plant direct sales program.

  11. Energy Responsibility Accounting - An Energy Conservation Tool for Industrial Facilities

    E-Print Network [OSTI]

    Kelly, R. L.

    1980-01-01T23:59:59.000Z

    As energy costs continue to rise faster than the rate of inflation, industrial energy management becomes a more important issue in the control of manufacturing costs. Energy Responsibility Accounting (ERA) is a tool which improves management...

  12. The social fabric of Jeans' Assessing the Social: Coupling social simulation and assessment

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    . For instance, Life Cycle Assessment (LCA) (Guin閑, 2002) focuses more on the embedded resources consumption many are not intended as major forms of assessment. Physical assessment (e.g. Life Cycle Assessment (LCA)), monetary assessment (e.g. Cost Benefit Analysis (CBA)), scenario analysis (tools

  13. Figure 2 Analysis Tool Interface Level-1 / PBBT Analysis Tool

    E-Print Network [OSTI]

    Figure 2 颅 Analysis Tool Interface Level-1 / PBBT Analysis Tool Introduction The Level-1/PBBT Analysis Tool (LPAT) was designed to assist in the analysis of North American Standard Level-1 Inspection. The data incorporated into the tool includes the results of Level-1 inspections with accompanying PBBT test

  14. Customization for tool design

    SciTech Connect (OSTI)

    Michaelson, B.

    1985-10-01T23:59:59.000Z

    ICEMDDN capabilities have been adapted to the specific needs of the tool designer for creation of tool and gage designs. A customized graphic system allows the designer to concentrate on the design task, not on the mechanics of the graphs system. Prerequisites of customization include management support, user acceptance, user contributions, CAD/CAM operations support and cooperation from Control Data Corporation. Benefits from customization included a measurable increase in design production, better completion schedules, high quality drawings with better accuracy, and job satisfaction from participation in system development and improvement.

  15. Drum lid removal tool

    DOE Patents [OSTI]

    Pella, Bernard M. (Martinez, GA); Smith, Philip D. (North Augusta, SC)

    2010-08-24T23:59:59.000Z

    A tool for removing the lid of a metal drum wherein the lid is clamped over the drum rim without protruding edges, the tool having an elongated handle with a blade carried by an angularly positioned holder affixed to the midsection of the handle, the blade being of selected width to slice between lid lip and the drum rim and, when the blade is so positioned, upward motion of the blade handle will cause the blade to pry the lip from the rim and allow the lid to be removed.

  16. PDSF Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratorySpeedingOptimizingTools Software and Tools Chos Chos is used to

  17. Survey of Existing Tools for Formal Verification.

    SciTech Connect (OSTI)

    Punnoose, Ratish J.; Armstrong, Robert C.; Wong, Matthew H.; Jackson, Mayo

    2014-12-01T23:59:59.000Z

    Formal methods have come into wide use because of their effectiveness in verifying %22safety and security%22 requirements of digital systems; a set of requirements for which testing is mostly ineffective. Formal methods are routinely used in the design and verification of high-consequence digital systems in industry. This report outlines our work in assessing the capabilities of commercial and open source formal tools and the ways in which they can be leveraged in digital design workflows.

  18. Smart tool holder

    DOE Patents [OSTI]

    Day, R.D.; Foreman, L.R.; Hatch, D.J.; Meadows, M.S.

    1998-09-08T23:59:59.000Z

    There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut. 3 figs.

  19. Supporting integrated design through interlinked tools: The Labs21 toolkit

    SciTech Connect (OSTI)

    Mathew, Paul; Bell, Geoffrey; Carlisle, Nancy; Sartor, Dale; van Geet, Otto; Lintner, William; Wirdzek, Phil

    2003-09-15T23:59:59.000Z

    The sustainable design of complex building types such as laboratories and hospitals can be particularly challenging, given their inherent complexity of systems, health and safety requirements, long-term flexibility and adaptability needs, energy use intensity, and environmental impacts. Tools such as design guides, energy benchmarking, and LEED rating systems are especially helpful to support sustainable design in such buildings. Furthermore, designers need guidance on how to effectively and appropriately use each tool within the context of an integrated design process involving multiple actors with various objectives. Toward this end, the Laboratories for the 21st Century (Labs21) program has developed an interlinked set of tools -- the Labs21 Toolkit -- to support an integrated design process for sustainable laboratories. Labs21 is a voluntary partnership program sponsored by the U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy (DOE) to improve the environment al performance of U.S. laboratories. In this paper, we present the Labs21 Toolkit, and illustrate how these tools can be used to support sustainable design within an integrated design process. The tool kit includes core information tools, as well as process-related tools, as indicated below: Core information tools: -A Design Guide, which is a compendium of publications on energy efficiency in laboratories -Case Studies that showcase high-performance design features and applications. -Best Practice Guides that highlight industry-leading sustainable design strategies. -A web-based Benchmarking Tool to benchmark laboratory energy performance.Process tools: -A Design Intent Tool, which can be used to used to plan, document, and verify that a facility's design intent is being met at each stage of the design process. The Environmental Performance Criteria (EPC), a rating system specifically designed for laboratory facilities that builds on the LEED(TM) system. -A web-based Process Manual, that provides a ''portal'' to the tools and a step-by-step process for using these tools during each stage of the design process.

  20. October 14 WA Division Newsletter Page 4 Tool durability and steel microstructure in friction stir welding of mild steel

    E-Print Network [OSTI]

    Cambridge, University of

    scheme to assess tool durability and tool life in the friction stir welding (FSW) of difficult alumin referencing is freely avail- able at: http://tinyurl.com/mst-fsw. Tools for friction stir welding (FSWOctober 14 WA Division Newsletter Page 4 Tool durability and steel microstructure in friction stir

  1. Developing Low-Conductance Window Frames: Capabilities and Limitations of Current Window Heat Transfer Design Tools

    E-Print Network [OSTI]

    Transfer Design Tools Arild Gustavsen1,* , Dariush Arasteh2 , Bj酶rn Petter Jelle3,4 , Charlie Curcija5-conductance window frames requires accurate simulation tools for product research and development. Based and develop recommendation for inclusion into the design fenestration tools. 3. Assess existing correlations

  2. Make the Most of Your Time: How Should the Analyst Work with Automated Traceability Tools?

    E-Print Network [OSTI]

    Dekhtyar, Alexander

    software engineer or analyst to make decisions or judgments based on the output of an automated tool. For example, a software architect may examine the outputs of a cost benefit analysis tool to decide on a particular architecture; a project manager may examine the output of a risk assessment tool to determine what

  3. Pneumatic soil removal tool

    DOE Patents [OSTI]

    Neuhaus, J.E.

    1992-10-13T23:59:59.000Z

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw. 3 figs.

  4. Pneumatic soil removal tool

    DOE Patents [OSTI]

    Neuhaus, John E. (Newport News, VA)

    1992-01-01T23:59:59.000Z

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw.

  5. Fluid blade disablement tool

    DOE Patents [OSTI]

    Jakaboski, Juan-Carlos (Albuquerque, NM); Hughs, Chance G. (Albuquerque, NM); Todd, Steven N. (Rio Rancho, NM)

    2012-01-10T23:59:59.000Z

    A fluid blade disablement (FBD) tool that forms both a focused fluid projectile that resembles a blade, which can provide precision penetration of a barrier wall, and a broad fluid projectile that functions substantially like a hammer, which can produce general disruption of structures behind the barrier wall. Embodiments of the FBD tool comprise a container capable of holding fluid, an explosive assembly which is positioned within the container and which comprises an explosive holder and explosive, and a means for detonating. The container has a concavity on the side adjacent to the exposed surface of the explosive. The position of the concavity relative to the explosive and its construction of materials with thicknesses that facilitate inversion and/or rupture of the concavity wall enable the formation of a sharp and coherent blade of fluid advancing ahead of the detonation gases.

  6. Java Vertexing Tools

    SciTech Connect (OSTI)

    Strube, Jan; /Oregon U.; Graf, Norman; /SLAC

    2006-03-03T23:59:59.000Z

    This document describes the implementation of the topological vertex finding algorithm ZVTOP within the org.lcsim reconstruction and analysis framework. At the present date, Java vertexing tools allow users to perform topological vertexing on tracks that have been obtained from a Fast MC simulation. An implementation that will be able to handle fully reconstructed events is being designed from the ground up for longevity and maintainability.

  7. Fluid sampling tool

    DOE Patents [OSTI]

    Garcia, A.R.; Johnston, R.G.; Martinez, R.K.

    1999-05-25T23:59:59.000Z

    A fluid sampling tool is described for sampling fluid from a container. The tool has a fluid collecting portion which is drilled into the container wall, thereby affixing it to the wall. The tool may have a fluid extracting section which withdraws fluid collected by the fluid collecting section. The fluid collecting section has a fluted shank with an end configured to drill a hole into a container wall. The shank has a threaded portion for tapping the borehole. The shank is threadably engaged to a cylindrical housing having an inner axial passageway sealed at one end by a septum. A flexible member having a cylindrical portion and a bulbous portion is provided. The housing can be slid into an inner axial passageway in the cylindrical portion and sealed to the flexible member. The bulbous portion has an outer lip defining an opening. The housing is clamped into the chuck of a drill, the lip of the bulbous section is pressed against a container wall until the shank touches the wall, and the user operates the drill. Wall shavings (kerf) are confined in a chamber formed in the bulbous section as it folds when the shank advances inside the container. After sufficient advancement of the shank, an o-ring makes a seal with the container wall. 6 figs.

  8. Frequency Response Analysis Tool

    SciTech Connect (OSTI)

    Etingov, Pavel V.; Kosterev, Dmitry; Dai, T.

    2014-12-31T23:59:59.000Z

    Frequency response has received a lot of attention in recent years at the national level, which culminated in the development and approval of North American Electricity Reliability Corporation (NERC) BAL-003-1 Frequency Response and Frequency Bias Setting Reliability Standard. This report is prepared to describe the details of the work conducted by Pacific Northwest National Laboratory (PNNL) in collaboration with the Bonneville Power Administration and Western Electricity Coordinating Council (WECC) Joint Synchronized Information Subcommittee (JSIS) to develop a frequency response analysis tool (FRAT). The document provides the details on the methodology and main features of the FRAT. The tool manages the database of under-frequency events and calculates the frequency response baseline. Frequency response calculations are consistent with frequency response measure (FRM) in NERC BAL-003-1 for an interconnection and balancing authority. The FRAT can use both phasor measurement unit (PMU) data, where available, and supervisory control and data acquisition (SCADA) data. The tool is also capable of automatically generating NERC Frequency Response Survey (FRS) forms required by BAL-003-1 Standard.

  9. Research Article Towards spatial data quality information analysis tools for experts

    E-Print Network [OSTI]

    Research Article Towards spatial data quality information analysis tools for experts assessing October 2004; in final form 11 November 2005 ) Geospatial data users increasingly face the need to assess data quality analysis. This paper presents the design of such a tool that can manage heterogeneous data

  10. Planning Tool for Strategic Evaluation of Facility Plans - 13570

    SciTech Connect (OSTI)

    Magoulas, Virginia; Cercy, Michael [Savannah River National Laboratory, Savannah River Site, Aiken, SC 29808 (United States)] [Savannah River National Laboratory, Savannah River Site, Aiken, SC 29808 (United States); Hall, Irin [Newport News Shipbuilding, 4101 Washington Ave., Newport News, VA 23607 (United States)] [Newport News Shipbuilding, 4101 Washington Ave., Newport News, VA 23607 (United States)

    2013-07-01T23:59:59.000Z

    Savannah River National Laboratory (SRNL) has developed a strategic planning tool for the evaluation of the utilization of its unique resources for processing and research and development of nuclear materials. The Planning Tool is a strategic level tool for assessing multiple missions that could be conducted utilizing the SRNL facilities and showcasing the plan. Traditional approaches using standard scheduling tools and laying out a strategy on paper tended to be labor intensive and offered either a limited or cluttered view for visualizing and communicating results. A tool that can assess the process throughput, duration, and utilization of the facility was needed. SRNL teamed with Newport News Shipbuilding (NNS), a division of Huntington Ingalls Industries, to create the next generation Planning Tool. The goal of this collaboration was to create a simulation based tool that allows for quick evaluation of strategies with respect to new or changing missions, and clearly communicates results to the decision makers. This tool has been built upon a mature modeling and simulation software previously developed by NNS. The Planning Tool provides a forum for capturing dependencies, constraints, activity flows, and variable factors. It is also a platform for quickly evaluating multiple mission scenarios, dynamically adding/updating scenarios, generating multiple views for evaluating/communicating results, and understanding where there are areas of risks and opportunities with respect to capacity. The Planning Tool that has been developed is useful in that it presents a clear visual plan for the missions at the Savannah River Site (SRS). It not only assists in communicating the plans to SRS corporate management, but also allows the area stakeholders a visual look at the future plans for SRS. The design of this tool makes it easily deployable to other facility and mission planning endeavors. (authors)

  11. E-Print Network 3.0 - assessment guidelines exposure Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the environmental health and Summary: exposure to effluent from a large municipal wastewater treatment plant (WWTP). Our assessment revealed... tools, were used to assess the...

  12. Chemical Emissions of Residential Materials and Products: Review of Available Information The Home Energy Scoring Tool: A

    E-Print Network [OSTI]

    The Home Energy Scoring Tool: A Simplified Asset Rating for Single thereof or the Regents of the University of California. #12;1 The Home Energy Scoring Tool: A Simplified-based computer tool and method for providing an energy asset rating of single-family homes. The resulting Home

  13. A scalable tools communication infrastructure.

    SciTech Connect (OSTI)

    Buntinas, D.; Bosilca, G.; Graham, R. L.; Vallee, G.; Watson, G. R.; Mathematics and Computer Science; Univ. of Tennessee; ORNL; IBM

    2008-07-01T23:59:59.000Z

    The Scalable Tools Communication Infrastructure (STCI) is an open source collaborative effort intended to provide high-performance, scalable, resilient, and portable communications and process control services for a wide variety of user and system tools. STCI is aimed specifically at tools for ultrascale computing and uses a component architecture to simplify tailoring the infrastructure to a wide range of scenarios. This paper describes STCI's design philosophy, the various components that will be used to provide an STCI implementation for a range of ultrascale platforms, and a range of tool types. These include tools supporting parallel run-time environments, such as MPI, parallel application correctness tools and performance analysis tools, as well as system monitoring and management tools.

  14. A Scalable Tools Communication Infrastructure

    SciTech Connect (OSTI)

    Buntinas, Darius [Argonne National Laboratory (ANL); Bosilca, George [University of Tennessee, Knoxville (UTK); Graham, Richard L [ORNL; Vallee, Geoffroy R [ORNL; Watson, Gregory R. [IBM T. J. Watson Research Center

    2008-01-01T23:59:59.000Z

    The Scalable Tools Communication Infrastructure (STCI) is an open source collaborative effort intended to provide high-performance, scalable, resilient, and portable communications and process control services for a wide variety of user and system tools. STCI is aimed specifically at tools for ultrascale computing and uses a component architecture to simplify tailoring the infrastructure to a wide range of scenarios. This paper describes STCI's design philosophy, the various components that will be used to provide an STCI implementation for a range of ultrascale platforms, and a range of tool types. These include tools supporting parallel run-time environments, such as MPI, parallel application correctness tools and performance analysis tools, as well as system monitoring and management tools.

  15. Development Tools at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOfficeNERSC Helps Develop Next-GenEMSL ResearchTools

  16. ARM - Data Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformationbudapest Comments? We would love toContact Information Related LinksDailyJulygovData Tools Data

  17. E-Print Network 3.0 - assessing dietary exposure Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dietary Guidance Tools to Plan and Assess Dietary Intake Digestion, Absorption & Transportation... . These concepts include: chemical ... Source: Collection: Environmental...

  18. Benefit-cost assessment of aviation environmental policies

    E-Print Network [OSTI]

    Gilmore, Christopher K. (Christopher Kenneth)

    2012-01-01T23:59:59.000Z

    This thesis aids in the development of a framework in which to conduct global benefit-cost assessments of aviation policies. Current policy analysis tools, such as the aviation environmental portfolio management tool (APMT), ...

  19. 5, 12291261, 2012 diagnostic tool

    E-Print Network [OSTI]

    Gettelman, Andrew

    GMDD 5, 1229颅1261, 2012 Community diagnostic tool A. Gettelman et al. Title Page Abstract to the corresponding final paper in GMD if available. A community diagnostic tool for Chemistry Climate Model Community diagnostic tool A. Gettelman et al. Title Page Abstract Introduction Conclusions References Tables

  20. NISTIR 7100 PDA Forensic Tools

    E-Print Network [OSTI]

    NISTIR 7100 PDA Forensic Tools: AnOverviewandAnalysis RickAyers WayneJansen #12;ii NISTIR 7100 C O M P U T E R S E C U R I T Y PDA Forensic Tools: An Overview and Analysis Rick Ayers Wayne Jansen incident, forensic examiners require tools that allow the proper retrieval and speedy examination

  1. Butt Joint Tool Commissioning

    SciTech Connect (OSTI)

    Martovetsky, N N

    2007-12-06T23:59:59.000Z

    ITER Central Solenoid uses butt joints for connecting the pancakes in the CS module. The principles of the butt joining of the CICC were developed by the JAPT during CSMC project. The difference between the CSMC butt joint and the CS butt joint is that the CS butt joint is an in-line joint, while the CSMC is a double joint through a hairpin jumper. The CS butt joint has to carry the hoop load. The straight length of the joint is only 320 mm, and the vacuum chamber around the joint has to have a split in the clamp shell. These requirements are challenging. Fig.1 presents a CSMC joint, and Fig.2 shows a CS butt joint. The butt joint procedure was verified and demonstrated. The tool is capable of achieving all specified parameters. The vacuum in the end was a little higher than the target, which is not critical and readily correctable. We consider, tentatively that the procedure is established. Unexpectedly, we discover significant temperature nonuniformity in the joint cross section, which is not formally a violation of the specs, but is a point of concern. All testing parameters are recorded for QA purposes. We plan to modify the butt joining tool to improve its convenience of operation and provide all features necessary for production of butt joints by qualified personnel.

  2. FASTBUS simulation tools

    SciTech Connect (OSTI)

    Dean, T.D. (Stanford Linear Accelerator Center, Menlo Park, CA (United States)); Haney, M.J. (Illinois Univ., Urbana, IL (United States))

    1991-10-01T23:59:59.000Z

    A generalized model of a FASTBUS master is presented. The model is used with simulation tools to aid in the specification, design, and production of FASTBUS slave modules. The model provides a mechanism to interact with the electrical schematics and software models to predict performance. The model is written in the IEEE std 1076-1987 hardware description language VHDL. A model of the ATC logic is also presented. VHDL was chosen to provide portability to various platforms and simulation tools. The models, in conjunction with most commercially available simulators, will perform all of the transactions specified in IEEE std 960-1989. The models may be used to study the behavior of electrical schematics and other software models and detect violations of the FASTBUS protocol. For example, a hardware design of a slave module could be studied, protocol violations detected and corrected before committing money to prototype development. The master model accepts a stream of high level commands from an ASCII file to initiate FASTBUS transactions. The high level command language is based on the FASTBUS standard routines listed in IEEE std 1177-1989. Using this standard-based command language to direct the model of the master, hardware engineers can simulate FASTBUS transactions in the language used by physicists and programmers to operate FASTBUS systems. 15 refs., 6 figs.

  3. A Retrofit Tool for Improving Energy Efficiency of Commercial Buildings

    SciTech Connect (OSTI)

    Levine, Mark; Feng, Wei; Ke, Jing; Hong, Tianzhen; Zhou, Nan

    2013-06-06T23:59:59.000Z

    Existing buildings will dominate energy use in commercial buildings in the United States for three decades or longer and even in China for the about two decades. Retrofitting these buildings to improve energy efficiency and reduce energy use is thus critical to achieving the target of reducing energy use in the buildings sector. However there are few evaluation tools that can quickly identify and evaluate energy savings and cost effectiveness of energy conservation measures (ECMs) for retrofits, especially for buildings in China. This paper discusses methods used to develop such a tool and demonstrates an application of the tool for a retrofit analysis. The tool builds on a building performance database with pre-calculated energy consumption of ECMs for selected commercial prototype buildings using the EnergyPlus program. The tool allows users to evaluate individual ECMs or a package of ECMs. It covers building envelope, lighting and daylighting, HVAC, plug loads, service hot water, and renewable energy. The prototype building can be customized to represent an actual building with some limitations. Energy consumption from utility bills can be entered into the tool to compare and calibrate the energy use of the prototype building. The tool currently can evaluate energy savings and payback of ECMs for shopping malls in China. We have used the tool to assess energy and cost savings for retrofit of the prototype shopping mall in Shanghai. Future work on the tool will simplify its use and expand it to cover other commercial building types and other countries.

  4. Using XFRACAS as a PVROM database tool.

    SciTech Connect (OSTI)

    Hamman, Colin Joseph

    2014-04-01T23:59:59.000Z

    ReliaSofts XFRACAS is a tool chosen by Sandia National Laboratories (SNL) for the purpose of collecting and organizing photovoltaic (PV) system field data that is to be used in assessing PV system reliability. It is a Web-based, closed-loop, incident (failure) reporting, analysis, and corrective action system software package designed for the acquisition, management and analysis of quality and reliability data from multiple sources. The ability to export PV system times-to-failure and times-to-suspension for ready analysis by ReliaSofts Weibull++ and RGA was a primary consideration in choosing XFRACAS as a reliability data collection tool.

  5. Downhole tool adapted for telemetry

    DOE Patents [OSTI]

    Hall, David R. (Provo, UT); Fox, Joe (Provo, UT)

    2010-12-14T23:59:59.000Z

    A cycleable downhole tool such as a Jar, a hydraulic hammer, and a shock absorber adapted for telemetry. This invention applies to other tools where the active components of the tool are displaced when the tool is rotationally or translationally cycled. The invention consists of inductive or contact transmission rings that are connected by an extensible conductor. The extensible conductor permits the transmission of the signal before, after, and during the cycling of the tool. The signal may be continuous or intermittent during cycling. The invention also applies to downhole tools that do not cycle, but in operation are under such stress that an extensible conductor is beneficial. The extensible conductor may also consist of an extensible portion and a fixed portion. The extensible conductor also features clamps that maintain the conductor under stresses greater than that seen by the tool, and seals that are capable of protecting against downhole pressure and contamination.

  6. Global Solar Opportunity Tool: A Tool for Policy Makers and Energy...

    Open Energy Info (EERE)

    and Energy Analysts Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts Focus Area: Solar...

  7. Electronic authoring tools

    SciTech Connect (OSTI)

    Hurford, J.M.

    1987-01-01T23:59:59.000Z

    More than a decade ago, word processing software revolutionized the way documents were prepared, and productivity was increased. But the editing and formatting capabilities of most word processors did very little to prevent errors in spelling, typing, grammar, diction, style, or organization from slipping through to the final documents. In the past few years, the number of software tools that aid the author has increased substantially. They now vary in scope from simple spelling checkers to sophisticated diction analyzers and idea processors. Moreover, writing-aid-software described in this report is now available for many types of computing systems, including personal computers, scientific workstations, and mainframes. The various pieces of software can be used in interactive or non-interactive (batch) modes.

  8. assess methoxycoal process: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    tools in support of an ecosystem-based approach to natural resource manage 37 "UUV FCEPS Technology Assessment and Design Process" Kevin L. Davies1 Renewable Energy Websites...

  9. Chlorite Dissolution Rates

    SciTech Connect (OSTI)

    Carroll, Susan

    2013-07-01T23:59:59.000Z

    Spreadsheets provides measured chlorite rate data from 100 to 300C at elevated CO2. Spreadsheet includes derived rate equation.

  10. Chlorite Dissolution Rates

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Carroll, Susan

    Spreadsheets provides measured chlorite rate data from 100 to 300C at elevated CO2. Spreadsheet includes derived rate equation.

  11. The Interest Rate Conundrum

    E-Print Network [OSTI]

    Craine, Roger; Martin, Vance L.

    2009-01-01T23:59:59.000Z

    Flows and US Interest Rates, NBER Working Paper No 12560. [Working Paper # 2008 -03 The Interest Rate Conundrum Roger

  12. Diamond tool wear vs cutting distance on electroless nickel mirrors

    SciTech Connect (OSTI)

    Syn, C.K.; Taylor, J.S.; Donaldson, R.R.

    1986-10-14T23:59:59.000Z

    Wear data are presented for diamond tools cutting electroless nickel (eNi) for cut lengths up to 70,000 ft (13 miles). Two tools having different infrared absorption characteristics were used to cut an eNi preparation that had yielded minimum values for surface roughness and tool wear rate in a previous study. The data include Talystep measurement of the rms amplitude of the feed-marks versus cumulative cutting distance, representative examples of shape changes for the feed-mark profiles, SEM and optical micrographs of the tool rake and flank face wear zones, and measurements of the cutting edge profile and edge recession distance by a tool-nose replication technique. Feed-mark roughness values were found to increase from 5 to 90 A rms over the duration of the test, with an associated edge recession of about 1000 A and the development of a periodic tool edge grooving indicative of burnishing of the part surface. The ir absorption data successfully predicted the order of the two tools in terms of wear rate and fracture toughness.

  13. Virtual Crosswalk Analysis Tool (VCAT)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    standard business representations show only the intended relationships and miss the rest. Social networking and data mining tools may show intended relationships and ignore the...

  14. Tool Wear in Friction Drilling

    SciTech Connect (OSTI)

    Miller, Scott F [ORNL; Blau, Peter Julian [ORNL; Shih, Albert J. [University of Michigan

    2007-01-01T23:59:59.000Z

    This study investigated the wear of carbide tools used in friction drilling, a nontraditional hole-making process. In friction drilling, a rotating conical tool uses the heat generated by friction to soften and penetrate a thin workpiece and create a bushing without generating chips. The wear of a hard tungsten carbide tool used for friction drilling a low carbon steel workpiece has been investigated. Tool wear characteristics were studied by measuring its weight change, detecting changes in its shape with a coordinate measuring machine, and making observations of wear damage using scanning electron microscopy. Energy dispersive spectroscopy was applied to analyze the change in chemical composition of the tool surface due to drilling. In addition, the thrust force and torque during drilling and the hole size were measured periodically to monitor the effects of tool wear. Results indicate that the carbide tool is durable, showing minimal tool wear after drilling 11000 holes, but observations also indicate progressively severe abrasive grooving on the tool tip.

  15. Slide system for machine tools

    DOE Patents [OSTI]

    Douglass, Spivey S. (Oak Ridge, TN); Green, Walter L. (Knoxville, TN)

    1982-01-01T23:59:59.000Z

    The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

  16. Slide system for machine tools

    DOE Patents [OSTI]

    Douglass, S.S.; Green, W.L.

    1980-06-12T23:59:59.000Z

    The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

  17. Information Technology Tools for Multifamily Building Programs...

    Energy Savers [EERE]

    Information Technology Tools for Multifamily Building Programs Information Technology Tools for Multifamily Building Programs Better Buildings Neighborhood Program Multifamily ...

  18. Automated energy monitoring of machine tools

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2010-01-01T23:59:59.000Z

    in manufacturing the tooling for many consumer products,process parameters, tooling, and cutting ?uid based on

  19. Certification and Rating of Attachments for Fenestration Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    rate fenestration attachment energy performance and provide accurate and useful product comparison criteria, allowing end users in residential and commercial markets to assess...

  20. QUALITY TOOLS APPLIED TO TERRITORIAL INTELLIGENCE Cinta C. Garca Vzquez

    E-Print Network [OSTI]

    Boyer, Edmond

    on a description of Territorial Intelligence; the second one contains the description of the "Six Sigma" process; and lastly, the description of some of the quality tools used by the Six Sigma project. Territorial based on the results observed in the assessment?. The "Six Sigma" method, deal with this question using

  1. Session 2380 TECHNOLOGY AS A TEACHING AND LEARNING TOOL

    E-Print Network [OSTI]

    Larkin, Teresa L.

    incorporated within many domains of science, mathematics, engineering, and technology (SMET) education laboratory experiment designed to teach the concept of momentum and impulse to introductory physics students-based learning tools in the physics laboratory to specific strategies that can be used to assess student learning

  2. Action-Oriented Benchmarking: Concepts and Tools

    SciTech Connect (OSTI)

    California Energy Commission; Mathew, Paul; Mills, Evan; Mathew, Paul; Piette, Mary Ann; Bourassa, Norman; Brook, Martha

    2008-02-13T23:59:59.000Z

    Most energy benchmarking tools provide static feedback on how one building compares to a larger set of loosely similar buildings, without providing information at the end-use level or on what can be done to reduce consumption, cost, or emissions. In this article--Part 1 of a two-part series--we describe an 'action-oriented benchmarking' approach, which extends whole-building energy benchmarking to include analysis of system and component energy use metrics and features. Action-oriented benchmarking thereby allows users to generate more meaningful metrics and to identify, screen and prioritize potential efficiency improvements. This opportunity assessment process can then be used to inform and optimize a full-scale audit or commissioning process. We introduce a new web-based action-oriented benchmarking system and associated software tool-EnergyIQ. The benchmarking methods, visualizations, and user interface design are informed by an end-user needs assessment survey and best-practice guidelines from ASHRAE.

  3. Radiological Assessment System for Consequence Analysis (RASCAL) Version 3.0

    SciTech Connect (OSTI)

    Athey, G.F.; Fosmire, C.; Mohseni, A.; Ramsdell, J.V., Jr.; Sjoreen, A.

    1999-09-13T23:59:59.000Z

    The Radiological Assessment System for Consequence AnaLysis, Version 3.0 (RASCAL 3.0) is the U.S. Nuclear Regulatory Commission?s (NRC) main computational tool for use during radiological emergencies. RASCAL estimates doses from radiological accidents for comparison with Protective Action Guides and acute health effects thresholds. It includes six computational tools: ST-Dose, FM-Dose, Decay, BackCalc, UF6Plume, and MetProc. ST-Dose computes time-dependent nuclide release rates, atmospheric transport, radiological decay, and doses. FM-Dose computes doses from environmental concentrations of nuclides. Decay computes radiological decay and daughter in-growth. BackCalc estimates a distribution of possible release rates from field measurements. UF6Plume computes uranium exposures and HF concentrations from a UF6 release. MetProc prepares meteorological data for use by ST-Dose and UF6Plume.

  4. Soil and Water Assessment Tool Theoretical Documentation Version 2009

    E-Print Network [OSTI]

    Neitsch, S.L.; Arnold, J.G.; Kiniry, J.R.; Williams, J.R.

    , the runoff volume and a partitioning factor. Sediment transport of P is simulated with a loading function as described in organic N transport. INTRODUCTION 19 Figure 0.7: Partitioning of Phosphorus in SWAT 0.2.1.6 PESTICIDES Although SWAT...:1.9 NITRATE IN THE SHALLOW AQUIFER 199 3:1.10 NOMENCLATURE 201 3:1.11 REFERENCES 203 CHAPTER 3:2 EQUATIONS: PHOSPHORUS 206 3:2.1 PHOSPHORUS CYCLE 207 INITIALIZATION OF SOIL PHOSPHORUS LEVELS 208 3:2.2 MINERALIZATION...

  5. Tools for Assessing Building Energy Use in Industrial Plants

    E-Print Network [OSTI]

    Martin, M.; MacDonald, M.

    2007-01-01T23:59:59.000Z

    This presentation will cover a brief history of building energy measures savings potential for industrial plants and briefly characterize building energy measures and their savings identified over approximately the past 15 years in energy audits...

  6. Rural Viability Index: A Tool for Assessing Rural Communities

    E-Print Network [OSTI]

    Bearden, Christi; Cruz, Nelda; Heinsohn, Heidi; Kuzaro, Jami; Norton, Keller; Richardson, Willis; Wood, Meghan

    2004-01-01T23:59:59.000Z

    . Have you applied or received funds to enhance your Main Street or downtown? Since the Main Street Program, and other programs like it, have limited funds available to provide to communities, this question addresses other efforts communities have... al. 2002). Literature Review and Survey Questions George Bush School of Government & Public Service 23 Texas Office of Rural Community Affairs Do you have any of the following in your community: Recreation sites, Private...

  7. Tools to manage and assess scholarship: altmetrics and Creative Commons

    E-Print Network [OSTI]

    Potvin, Sarah

    2014-07-23T23:59:59.000Z

    ? Hirsch index 12 analytics in the libraries 13 who抯 using altmetrics? Collecting: + Altmetric + ImpactStory + Plum Analytics + ScienceCard + PLoS + Mendeley + SlideShare + Wikipedia + Figshare + CiteULike + Facebook Publishing: + PLo... 爈ike 爐he 燜acebook 爉odel: 燾reate 爏oftware 燼nd 燼 爃uge 爏ocial 爊etwork 爄n 爓hich 爌eople 爏hare 爄nformation 爐hat 爄t 燾an 爌rofitably 爃arvest, 燼nd 燽e 爅ust 燾onciliatory 爀nough 燼bout...

  8. 30 May 2012 Version Emergency Power Facility Assessment Tool (EPFAT)

    E-Print Network [OSTI]

    US Army Corps of Engineers

    , such as water treatment plants, hospitals, wastewater treatment plants and shelters. The U.S. Army Corps

  9. Hydro Review: Computational Tools to Assess Turbine Biological...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to analyze the biological performance of proposed designs to help ensure the safety of fish passing through the turbines at the Priest Rapids Dam in Grant County, Washington....

  10. Policy Flash 2014-19 Electronic Products Environmental Assessment Tool

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15, 2010Energy6 FronteraMarijuanaand(EPEAT) | Department of

  11. Policy Flash 2014-19 Electronic Products Environmental Assessment Tool

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15, 2010Energy6 FronteraMarijuanaand(EPEAT) | Department of(EPEAT)

  12. ORISE Resources: Community Assessment Tool for the CDC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | NationalJohnSecurityControlsOMB Policies OR I GIORISE Develops

  13. Process Heating Assessment and Survey Tool (PHAST) Introduction |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket |21,-CommitteeItems at Department of

  14. Process Heating Assessment and Survey Tool Fact Sheet | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket |21,-CommitteeItems at Department ofEnergy fact

  15. Process Heating Assessment and Survey Tool User Manuals | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket |21,-CommitteeItems at Department ofEnergy

  16. Pumping System Assessment Tool Fact Sheet | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket37963 Vol. 79,Department of Energytip

  17. Pumping System Assessment Tool Overview | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket37963 Vol. 79,Department of Energytippower point

  18. Pumping System Assessment Tool User Manual | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket37963 Vol. 79,Department of Energytippower

  19. Qualified Specialists in Industrial Assessment Tools | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket37963 Vol.Department of

  20. A homeowner assessment tool supporting home energy audits.

    E-Print Network [OSTI]

    Mohr, Nathalie

    2012-01-01T23:59:59.000Z

    ??The growth in residential energy consumption is an increasing problem in the U.S. from both environmental and economic standpoints. Interventions have been put in place (more)

  1. Fan System Assessment Tool Fact Sheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat PumpRecord ofESPCofConstructionofFYOxideof EnergyFactDepartmentFact Sheet Fan

  2. Fan System Assessment Tool User Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat PumpRecord ofESPCofConstructionofFYOxideof EnergyFactDepartmentFact SheetUser

  3. Process Heating Assessment and Survey Tool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment ofOil'sof EnergyReserveDepartmentDepartment of

  4. Fan System Assessment Tool Introduction | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review:Department ofDistribution Infrastructure | Department of Energy AnFan System

  5. Process Heating Assessment and Survey Tool (PHAST) Introduction - Webcast

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d FNEPA/309Department of EnergyProcess Design andofProcess Heating

  6. Energy Efficient Cities: Assessment Tool and Benchmarking Practices | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision has beenFfe2fb55-352f-473b-a2dd-50ae8b27f0a6 No revisionWind,Soilsfilesystem socket.pngFigure

  7. Hydro Review: Computational Tools to Assess Turbine Biological Performance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:Groundto Apply forInstitute Mission and Vision:Hydride|

  8. Policy Flash 2014-19 Electronic Products Environmental Assessment Tool

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |EnergyonSupport0.pdf5 OPAMOCHCOBackgroundDepartment of Energy8 Acquisition|Policy

  9. European Commission Impact Assessment Tools | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Power Basics (TheEtelligence (Smart Grid Project) Jump

  10. Hydrogen Demand and Resource Assessment Tool | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation,Ohio:GreerHiCalifornia: Energy ResourcesPark,isHydro orHydroelectricA)

  11. Sandia National Laboratories: Cost Effective Real Time Wave Assessment Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0EnergySandia Involves Wind-FarmCool Earth Solar Cool Earth

  12. Method and apparatus for characterizing and enhancing the functional performance of machine tools

    DOE Patents [OSTI]

    Barkman, William E; Babelay, Jr., Edwin F; Smith, Kevin Scott; Assaid, Thomas S; McFarland, Justin T; Tursky, David A; Woody, Bethany; Adams, David

    2013-04-30T23:59:59.000Z

    Disclosed are various systems and methods for assessing and improving the capability of a machine tool. The disclosure applies to machine tools having at least one slide configured to move along a motion axis. Various patterns of dynamic excitation commands are employed to drive the one or more slides, typically involving repetitive short distance displacements. A quantification of a measurable merit of machine tool response to the one or more patterns of dynamic excitation commands is typically derived for the machine tool. Examples of measurable merits of machine tool performance include workpiece surface finish, and the ability to generate chips of the desired length.

  13. Machine tool accuracy characterization workshops. Final report, May 5, 1992--November 5 1993

    SciTech Connect (OSTI)

    NONE

    1995-01-06T23:59:59.000Z

    The ability to assess the accuracy of machine tools is required by both tool builders and users. Builders must have this ability in order to predict the accuracy capability of a machine tool for different part geometry`s, to provide verifiable accuracy information for sales purposes, and to locate error sources for maintenance, troubleshooting, and design enhancement. Users require the same ability in order to make intelligent choices in selecting or procuring machine tools, to predict component manufacturing accuracy, and to perform maintenance and troubleshooting. In both instances, the ability to fully evaluate the accuracy capabilities of a machine tool and the source of its limitations is essential for using the tool to its maximum accuracy and productivity potential. This project was designed to transfer expertise in modern machine tool accuracy testing methods from LLNL to US industry, and to educate users on the use and application of emerging standards for machine tool performance testing.

  14. Method and apparatus for characterizing and enhancing the dynamic performance of machine tools

    DOE Patents [OSTI]

    Barkman, William E; Babelay, Jr., Edwin F

    2013-12-17T23:59:59.000Z

    Disclosed are various systems and methods for assessing and improving the capability of a machine tool. The disclosure applies to machine tools having at least one slide configured to move along a motion axis. Various patterns of dynamic excitation commands are employed to drive the one or more slides, typically involving repetitive short distance displacements. A quantification of a measurable merit of machine tool response to the one or more patterns of dynamic excitation commands is typically derived for the machine tool. Examples of measurable merits of machine tool performance include dynamic one axis positional accuracy of the machine tool, dynamic cross-axis stability of the machine tool, and dynamic multi-axis positional accuracy of the machine tool.

  15. E-Print Network 3.0 - assessing nutrition-pollution interactions...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to assess property... that property is under-assessed by approximately 25 percent. Though urban areas assess at a slightly higher rate... to residents of those communities....

  16. Computational Tools for Supersymmetry Calculations

    E-Print Network [OSTI]

    Howard Baer

    2009-12-16T23:59:59.000Z

    I present a brief overview of a variety of computational tools for supersymmetry calculations, including: spectrum generators, cross section and branching fraction calculators, low energy constraints, general purpose event generators, matrix element event generators, SUSY dark matter codes, parameter extraction codes and Les Houches interface tools.

  17. Tools for charged Higgs bosons

    E-Print Network [OSTI]

    Oscar St錶

    2010-12-13T23:59:59.000Z

    We review the status of publicly available software tools applicable to charged Higgs physics. A selection of codes are highlighted in more detail, focusing on new developments that have taken place since the previous charged Higgs workshop in 2008. We conclude that phenomenologists now have the tools ready to face the LHC data. A new webpage collecting charged Higgs resources is presented.

  18. Data Mining Tools Irfan Altas

    E-Print Network [OSTI]

    Turlach, Berwin A.

    Data Mining Tools Irfan Altas School of Information Studies, Charles Sturt University Wagga Wagga discuss several scalable and parallel discovery and predictive data mining tools. They successfully address many of the computational challenges associated with the analy sis of data sets with millions

  19. Vehicle assisted harpoon breaching tool

    DOE Patents [OSTI]

    Pacheco, James E. (Albuquerque, NM); Highland, Steven E. (Albuquerque, NM)

    2011-02-15T23:59:59.000Z

    A harpoon breaching tool that allows security officers, SWAT teams, police, firemen, soldiers, or others to forcibly breach metal doors or walls very quickly (in a few seconds), without explosives. The harpoon breaching tool can be mounted to a vehicle's standard receiver hitch.

  20. Development of risk assessment methodology for municipal sludge incineration

    SciTech Connect (OSTI)

    Not Available

    1990-10-01T23:59:59.000Z

    This is one of a series of reports that present methodologies for assessing the potential risks to humans or other organisms from the disposal or reuse of municipal sludge. The sludge management practices addressed by the series include land application practices, distribution and marketing programs, landfilling, surface disposal, incineration and ocean disposal. In particular, these reports provide methods for evaluating potential health and environmental risks from toxic chemicals that may be present in sludge. The document addresses risks from chemicals associated with incineration of municipal sludge. These proposed risk assessment procedures are designed as tools to assist in the development of regulations for sludge management practices. The procedures are structured to allow calculation of technical criteria for sludge disposal/reuse options based on the potential for adverse health or environmental impacts. The criteria may address management practices (such as site design or process control specifications), limits on sludge disposal rates or limits on toxic chemical concentrations in the sludge.

  1. Life Cycle Assessment of Pavements: A Critical Review of Existing Literature and Research

    E-Print Network [OSTI]

    Santero, Nicholas

    2010-01-01T23:59:59.000Z

    tools related to life- cycle assessment (LCA) applied toaccomplished using a life-cycle assessment (LCA) approach.EIO-LCA (Economic Input-Output Life-Cycle Assessment) model

  2. Consumer-oriented Life Cycle Assessment of Food, Goods and Services

    E-Print Network [OSTI]

    Jones, Christopher M; Kammen, Daniel M; McGrath, Daniel T

    2008-01-01T23:59:59.000Z

    Product-level life cycle assessment (LCA) approaches canInput-Output Life Cycle Assessment (EIO-LCA); Carnegieinput-output life cycle assessment (IO-LCA) tools present a

  3. Effective Rate Period

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the FY Mid-Year Change 10012013 - 03312014 04012014 - 09302014 Power Rates Annual Revenue Requirement Rate Schedule Power Revenue Requirement 73,441,557...

  4. Modeling of Tool Wear and Tool Fracture in Micromilling

    E-Print Network [OSTI]

    Shiosaki, Dominic

    2012-02-14T23:59:59.000Z

    implants. Micromilling has the potential to be the most cost effective and efficient material removal process due to ease of use and accessibility of the tools. This research analyzes vibration of a high speed spindle and then studies micromilling...

  5. Guidebook for Using the Tool BEST Cement: Benchmarking and Energy Savings Tool for the Cement Industry

    SciTech Connect (OSTI)

    Galitsky, Christina; Price, Lynn; Zhou, Nan; Fuqiu , Zhou; Huawen, Xiong; Xuemin, Zeng; Lan, Wang

    2008-07-30T23:59:59.000Z

    The Benchmarking and Energy Savings Tool (BEST) Cement is a process-based tool based on commercially available efficiency technologies used anywhere in the world applicable to the cement industry. This version has been designed for use in China. No actual cement facility with every single efficiency measure included in the benchmark will likely exist; however, the benchmark sets a reasonable standard by which to compare for plants striving to be the best. The energy consumption of the benchmark facility differs due to differences in processing at a given cement facility. The tool accounts for most of these variables and allows the user to adapt the model to operational variables specific for his/her cement facility. Figure 1 shows the boundaries included in a plant modeled by BEST Cement. In order to model the benchmark, i.e., the most energy efficient cement facility, so that it represents a facility similar to the user's cement facility, the user is first required to input production variables in the input sheet (see Section 6 for more information on how to input variables). These variables allow the tool to estimate a benchmark facility that is similar to the user's cement plant, giving a better picture of the potential for that particular facility, rather than benchmarking against a generic one. The input variables required include the following: (1) the amount of raw materials used in tonnes per year (limestone, gypsum, clay minerals, iron ore, blast furnace slag, fly ash, slag from other industries, natural pozzolans, limestone powder (used post-clinker stage), municipal wastes and others); the amount of raw materials that are preblended (prehomogenized and proportioned) and crushed (in tonnes per year); (2) the amount of additives that are dried and ground (in tonnes per year); (3) the production of clinker (in tonnes per year) from each kiln by kiln type; (4) the amount of raw materials, coal and clinker that is ground by mill type (in tonnes per year); (5) the amount of production of cement by type and grade (in tonnes per year); (6) the electricity generated onsite; and, (7) the energy used by fuel type; and, the amount (in RMB per year) spent on energy. The tool offers the user the opportunity to do a quick assessment or a more detailed assessment--this choice will determine the level of detail of the energy input. The detailed assessment will require energy data for each stage of production while the quick assessment will require only total energy used at the entire facility (see Section 6 for more details on quick versus detailed assessments). The benchmarking tool provides two benchmarks--one for Chinese best practices and one for international best practices. Section 2 describes the differences between these two and how each benchmark was calculated. The tool also asks for a target input by the user for the user to set goals for the facility.

  6. State and Local Energy Planners: New Tool Helps Shape Your Sustainability Strategy

    Office of Energy Efficiency and Renewable Energy (EERE)

    Energy Department and National Renewable Energy Laboratory develop the State and Local Energy Data (SLED) tool, a new website capable of analyzing and sorting data in real-time to quickly assess regional energy system, demand and resources.

  7. Assessing the Security Vulnerabilities of Correctional Facilities

    SciTech Connect (OSTI)

    Morrison, G.S.; Spencer, D.S.

    1998-10-27T23:59:59.000Z

    The National Institute of Justice has tasked their Satellite Facility at Sandia National Laboratories and their Southeast Regional Technology Center in Charleston, South Carolina to devise new procedures and tools for helping correctional facilities to assess their security vulnerabilities. Thus, a team is visiting selected correctional facilities and performing vulnerability assessments. A vulnerability assessment helps to identi~ the easiest paths for inmate escape, for introduction of contraband such as drugs or weapons, for unexpected intrusion fi-om outside of the facility, and for the perpetration of violent acts on other inmates and correctional employees, In addition, the vulnerability assessment helps to quantify the security risks for the facility. From these initial assessments will come better procedures for performing vulnerability assessments in general at other correctional facilities, as well as the development of tools to assist with the performance of such vulnerability assessments.

  8. Tools for dynamic model development

    E-Print Network [OSTI]

    Schaber, Spencer Daniel

    2014-01-01T23:59:59.000Z

    For this thesis, several tools for dynamic model development were developed and analyzed. Dynamic models can be used to simulate and optimize the behavior of a great number of natural and engineered systems, from the ...

  9. Nonstandard Tools for Nonsmooth Analysis

    E-Print Network [OSTI]

    S. S. Kutateladze

    2012-06-11T23:59:59.000Z

    This is an overview of the basic tools of nonsmooth analysis which are grounded on nonstandard models of set theory. By way of illustration we give a criterion for an infinitesimally optimal path of a general discrete dynamic system.

  10. Management System Verification (MSV) Tool

    Broader source: Energy.gov [DOE]

    The MSV process developed by ACC is a tool (not a requirement) that DOE sites may consider to help determine whether their ES&H program is truly integrated into all work at all levels by all employees.

  11. NABERS: Lessons from 12 Years of Performance Based Ratings in Australia

    E-Print Network [OSTI]

    Bannister, P.

    2012-01-01T23:59:59.000Z

    expanded to include performance based energy and water ratings for offices, hotels and shopping centres, plus performance based rating tools for office indoor environment and waste. NABERS has achieved significant success in transforming the energy...

  12. Seal for fluid forming tools

    DOE Patents [OSTI]

    Golovashchenko, Sergey Fedorovich (Beverly Hills, MI); Bonnen, John Joseph Francis (Milford, MI)

    2012-03-20T23:59:59.000Z

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  13. Eastern Energy Zones Mapping Tool

    Broader source: Energy.gov [DOE]

    The Eastern Interconnection States Planning Council (EISPC) has released the Energy Zones (EZ) Mapping Tool, a free, web-based interactive tool that will help states and other stakeholders in the Eastern Interconnection identify geographic areas suitable for the development of clean energy resources (natural gas, sequestration or utilitization locations for C02 from coal, nuclear, and renewable) which can potentially provide significant amounts of new electric power generation.

  14. Design tools for passive solar applications

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1986-04-01T23:59:59.000Z

    Examples of passive solar design tools are given, categorized as either evaluation tools or guidance tools. A trend toward microcomputer-based tools is noted; however, these are usually developed for use by engineers rather than architects. The need for more instructive tools targeted specifically to designers is emphasized.

  15. Upscaling geochemical reaction rates using pore-scale network modeling

    E-Print Network [OSTI]

    Peters, Catherine A.

    . To examine the scaling behavior of reaction kinetics, these continuum-scale rates from the network model as a valuable research tool for examining upscaling of geochemical kinetics. The pore-scale model allowsUpscaling geochemical reaction rates using pore-scale network modeling Li Li, Catherine A. Peters

  16. Method and tool for network vulnerability analysis

    DOE Patents [OSTI]

    Swiler, Laura Painton (Albuquerque, NM); Phillips, Cynthia A. (Albuquerque, NM)

    2006-03-14T23:59:59.000Z

    A computer system analysis tool and method that will allow for qualitative and quantitative assessment of security attributes and vulnerabilities in systems including computer networks. The invention is based on generation of attack graphs wherein each node represents a possible attack state and each edge represents a change in state caused by a single action taken by an attacker or unwitting assistant. Edges are weighted using metrics such as attacker effort, likelihood of attack success, or time to succeed. Generation of an attack graph is accomplished by matching information about attack requirements (specified in "attack templates") to information about computer system configuration (contained in a configuration file that can be updated to reflect system changes occurring during the course of an attack) and assumed attacker capabilities (reflected in "attacker profiles"). High risk attack paths, which correspond to those considered suited to application of attack countermeasures given limited resources for applying countermeasures, are identified by finding "epsilon optimal paths."

  17. Verification and Validation Strategy for LWRS Tools

    SciTech Connect (OSTI)

    Carl M. Stoots; Richard R. Schultz; Hans D. Gougar; Thomas K Larson; Michael Corradini; Laura Swiler; David Pointer; Jess Gehin

    2012-09-01T23:59:59.000Z

    One intension of the Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) program is to create advanced computational tools for safety assessment that enable more accurate representation of a nuclear power plant safety margin. These tools are to be used to study the unique issues posed by lifetime extension and relicensing of the existing operating fleet of nuclear power plants well beyond their first license extension period. The extent to which new computational models / codes such as RELAP-7 can be used for reactor licensing / relicensing activities depends mainly upon the thoroughness with which they have been verified and validated (V&V). This document outlines the LWRS program strategy by which RELAP-7 code V&V planning is to be accomplished. From the perspective of developing and applying thermal-hydraulic and reactivity-specific models to reactor systems, the US Nuclear Regulatory Commission (NRC) Regulatory Guide 1.203 gives key guidance to numeric model developers and those tasked with the validation of numeric models. By creating Regulatory Guide 1.203 the NRC defined a framework for development, assessment, and approval of transient and accident analysis methods. As a result, this methodology is very relevant and is recommended as the path forward for RELAP-7 V&V. However, the unique issues posed by lifetime extension will require considerations in addition to those addressed in Regulatory Guide 1.203. Some of these include prioritization of which plants / designs should be studied first, coupling modern supporting experiments to the stringent needs of new high fidelity models / codes, and scaling of aging effects.

  18. MATCASC: A tool to analyse cascading line outages in power grids

    E-Print Network [OSTI]

    Ko, Yakup; Araujo, Nuno A M; Warnier, Martijn

    2013-01-01T23:59:59.000Z

    Blackouts in power grids typically result from cascading failures. The key importance of the electric power grid to society encourages further research into sustaining power system reliability and developing new methods to manage the risks of cascading blackouts. Adequate software tools are required to better analyze, understand, and assess the consequences of the cascading failures. This paper presents MATCASC, an open source MATLAB based tool to analyse cascading failures in power grids. Cascading effects due to line overload outages are considered. The applicability of the MATCASC tool is demonstrated by assessing the robustness of IEEE test systems and real-world power grids with respect to cascading failures.

  19. NREL: Technology Deployment - Models and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for improving this tool? Please send us an email with your thoughts. The Community Solar Scenario Tool (CSST) provides a "first cut" analysis of different community or...

  20. NREL: Systems Engineering - Models and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Tools The NREL Systems Engineering Initiative develops, integrates, and analyzes wind energy system models. NREL has developed an overall integrated system analysis tool...

  1. Clean Cities & Transportation Tools | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    & Transportation Tools Clean Cities & Transportation Tools U.S. Department of Energy (DOE) Technical Assistance Project (TAP) for state and local officials Webinar presentation on...

  2. VISTA - computational tools for comparative genomics

    E-Print Network [OSTI]

    Frazer, Kelly A.; Pachter, Lior; Poliakov, Alexander; Rubin, Edward M.; Dubchak, Inna

    2004-01-01T23:59:59.000Z

    tools for comparative genomics Kelly A. Frazer 1 , LiorBerkeley, CA, 94720 Genomics Division, Lawrence Berkeleymultiple comparative genomics tools and provides users with

  3. Jebeile. The Mobile Subject Assistant THE MOBILE SUBJECT ASSISTANT: A MOBILE COURSE TOOL

    E-Print Network [OSTI]

    Rubinstein, Benjamin

    Jebeile. The Mobile Subject Assistant THE MOBILE SUBJECT ASSISTANT: A MOBILE COURSE TOOL of Wollongong ABSTRACT: The rapid adoption rate of mobile phones coupled with advancements in supporting technologies suggests mobile phones may now be a viable tool for classroom use. In this paper we introduce

  4. Tools for Living and Tools for Learning Stefan Carmien and Gerhard Fischer

    E-Print Network [OSTI]

    Fischer, Gerhard

    Tools for Living and Tools for Learning Stefan Carmien and Gerhard Fischer University of Colorado as tools, particularly computational artifacts. We introduce the notions of tools for living and tools for the design of artifacts. The tools concept is then studied in the context of the Memory Aiding Prompting

  5. Foundational Tools for Petascale Computing

    SciTech Connect (OSTI)

    Miller, Barton

    2014-05-19T23:59:59.000Z

    The Paradyn project has a history of developing algorithms, techniques, and software that push the cutting edge of tool technology for high-end computing systems. Under this funding, we are working on a three-year agenda to make substantial new advances in support of new and emerging Petascale systems. The overall goal for this work is to address the steady increase in complexity of these petascale systems. Our work covers two key areas: (1) The analysis, instrumentation and control of binary programs. Work in this area falls under the general framework of the Dyninst API tool kits. (2) Infrastructure for building tools and applications at extreme scale. Work in this area falls under the general framework of the MRNet scalability framework. Note that work done under this funding is closely related to work done under a contemporaneous grant, 揌igh-Performance Energy Applications and Systems, SC0004061/FG02-10ER25972, UW PRJ36WV.

  6. Combination drilling and skiving tool

    DOE Patents [OSTI]

    Stone, William J. (Kansas City, MO)

    1989-01-01T23:59:59.000Z

    A combination drilling and skiving tool including a longitudinally extending hollow skiving sleeve slidably and concentrically mounted on a right-handed twist drill. Dogs or pawls provided on the internal periphery of the skiving sleeve engage with the helical grooves of the drill. During a clockwise rotation of the tool, the drill moves downwardly and the sleeve translates upwardly, so that the drill performs a drilling operation on a workpiece. On the other hand, the drill moves upwardly and the sleeve translates downwardly, when the tool is rotated in a counter-clockwise direction, and the sleeve performs a skiving operation. The drilling and skiving operations are separate, independent and exclusive of each other.

  7. Calibration and Rating of Photovoltaics: Preprint

    SciTech Connect (OSTI)

    Emery, K.

    2012-06-01T23:59:59.000Z

    Rating the performance of photovoltaic (PV) modules is critical to determining the cost per watt, and efficiency is useful to assess the relative progress among PV concepts. Procedures for determining the efficiency for PV technologies from 1-sun to low concentration to high concentration are discussed. We also discuss the state of the art in primary and secondary calibration of PV reference cells used by calibration laboratories around the world. Finally, we consider challenges to rating PV technologies and areas for improvement.

  8. Design of a cross section reduction extrusion tool for square bars

    E-Print Network [OSTI]

    Onipede, Bolarinwa O.

    2007-04-25T23:59:59.000Z

    .1.1. Performance requirements 37 3.1.2. Tool selection criteria . 40 3.2. Selected Tool Configuration . 45 3.3. Assembly of Area Reduction Extrusion Tool . 47 3.4. Material Selection and Assessment 48 4. ENGINEERING ANALYSIS AND DESIGN... ISSUES .. 55 4.1. In-Service Loads and Associated Displacements 55 4.1.1. Solid model, engineering drawings and sections of tool assembly ........ 56 4.1.2. Material processing and heat treatment . 72 4.1.3. Required fits...

  9. Tools for measuring surface cleanliness

    DOE Patents [OSTI]

    Schroder, Mark Stewart (Hendersonville, NC); Woodmansee, Donald Ernest (Simpsonville, SC); Beadie, Douglas Frank (Greenville, SC)

    2002-01-01T23:59:59.000Z

    A procedure and tools for quantifying surface cleanliness are described. Cleanliness of a target surface is quantified by wiping a prescribed area of the surface with a flexible, bright white cloth swatch, preferably mounted on a special tool. The cloth picks up a substantial amount of any particulate surface contamination. The amount of contamination is determined by measuring the reflectivity loss of the cloth before and after wiping on the contaminated system and comparing that loss to a previous calibration with similar contamination. In the alternative, a visual comparison of the contaminated cloth to a contamination key provides an indication of the surface cleanliness.

  10. Integrated Assessment Modeling

    SciTech Connect (OSTI)

    Edmonds, James A.; Calvin, Katherine V.; Clarke, Leon E.; Janetos, Anthony C.; Kim, Son H.; Wise, Marshall A.; McJeon, Haewon C.

    2012-10-31T23:59:59.000Z

    This paper discusses the role of Integrated Assessment models (IAMs) in climate change research. IAMs are an interdisciplinary research platform, which constitutes a consistent scientific framework in which the large-scale interactions between human and natural Earth systems can be examined. In so doing, IAMs provide insights that would otherwise be unavailable from traditional single-discipline research. By providing a broader view of the issue, IAMs constitute an important tool for decision support. IAMs are also a home of human Earth system research and provide natural Earth system scientists information about the nature of human intervention in global biogeophysical and geochemical processes.

  11. 2007 Wholesale Power Rate Case Final Proposal : Wholesale Power Rate Development Study.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    2006-07-01T23:59:59.000Z

    The Wholesale Power Rate Development Study (WPRDS) serves two primary purposes. It synthesizes information supplied by the other final studies that comprise the BPA rate proposal and shows the actual calculations for BPA's power rates. In addition, the WPRDS is the primary source for certain information used in establishing the power rates. Information developed in the WPRDS includes rate design (including seasonal and diurnal shapes for energy rates, demand, and load variance rates), the risk mitigation tools (Cost Recovery Adjustment Clause (CRAC), along with the [N]ational Marine Fisheries Service [F]ederal Columbia River Power System [B]iological Opinion (NFB) Adjustment, the Emergency NFB Surcharge, and Dividend Distribution Clause (DDC)), development of the Slice rate, and all discounts and other adjustments that are included in the rate schedules and the General Rate Schedule Provisions. The WPRDS also includes the description of the methodology for the Cost of Service Analysis (COSA), and the various rate design steps necessary to establish BPA's power rates. The WPRDS also shows the calculations for inter-business line revenues and expenses, the revenue forecast and, finally, includes a description of all of the rate schedules. The actual rate schedules are shown in ''Administrator's Final Record of Decision (ROD), Appendix A: 2007 Wholesale Power Rate Schedules and General Rate Schedule Provisions, WP-07-A-02''. The WPRDS also includes the Partial Resolution of Issues, shown in Attachment 1 of the ROD. The Partial Resolution of Issues affected many of the features described in this study. These are noted where appropriate.

  12. VCAT: Visual Crosswalk Analysis Tool

    SciTech Connect (OSTI)

    Cleland, Timothy J. [Los Alamos National Laboratory; Forslund, David W. [Los Alamos National Laboratory; Cleland, Catherine A. [Los Alamos National Laboratory

    2012-08-31T23:59:59.000Z

    VCAT is a knowledge modeling and analysis tool. It was synthesized from ideas in functional analysis, business process modeling, and complex network science. VCAT discovers synergies by analyzing natural language descriptions. Specifically, it creates visual analytic perspectives that capture intended organization structures, then overlays the serendipitous relationships that point to potential synergies within an organization or across multiple organizations.

  13. From Metaphor to Analytic Tool

    E-Print Network [OSTI]

    Process Tracing From Metaphor to Analytic Tool Edited by ANDREW BENNETT and JEFFREY T. CHECKEL process tracing." Andrew Bennett is Professor of Government at Georgetown Uni versity. He is also: 漏 VvoeVale/iStock.com series cover design: sue watson "Bennett and Checkel have assembled an im- pressive

  14. DREAM tool increases space weather predictions

    E-Print Network [OSTI]

    - 1 - DREAM tool increases space weather predictions April 13, 2012 Predicting space weather improved by new DREAM modeling tool Earth's radiation belts can now be studied with a new modeling tool DREAM comes into play. Radiation belt structure and dynamics revealed DREAM is a modeling tool

  15. Search Tool for Leveraged Procurement Agreements

    E-Print Network [OSTI]

    Search Tool for Leveraged Procurement Agreements (LPA) Illustrated User Manual #12;2 Search Tool://www.bidsync.com #12;3 Search Tool for Leveraged Procurement Agreements (LPA) Rev. 5/5/09 Introduction Bid: Select Search Contracts/Leveraged Procurement Agreements (LPA's). #12;4 Search Tool for Leveraged

  16. Energy Performance Certification of Buildings: A Policy Tool...

    Open Energy Info (EERE)

    Buildings: A Policy Tool to Improve Energy Efficiency Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Performance Certification of Buildings: A Policy Tool to...

  17. Considerations for How to Rate CPV

    SciTech Connect (OSTI)

    Kurtz, S.; Miller, M.; Marion, B.; Emery, K.; McConnell, R.; Surendran, S.; Kimber, A.

    2011-02-01T23:59:59.000Z

    The concentrator photovoltaic (CPV) industry is introducing multiple products into the marketplace, but, as yet, the; community has not embraced a unified method for assessing a nameplate rating. The choices of whether to use 850,; 900, or 1000 W/m2 for the direct-normal irradiance and whether to link the rating to ambient or cell temperature will; affect how CPV modules are rated and compared with other technologies. This paper explores the qualitative and; quantitative ramifications of these choices using data from two multi-junction CPV modules and two flat-plate; modules.

  18. MC&A System Effectiveness Tool (MSET) (Presentation 2)

    SciTech Connect (OSTI)

    Powell, Danny H [ORNL] [ORNL; Elwood Jr, Robert H [ORNL] [ORNL

    2011-01-01T23:59:59.000Z

    MSET is a self-assessment or inspection tool utilizing probabilistic risk assessment (PRA) methodology to calculate the system effectiveness of a nuclear facility's material control and accountability (MC&A) system. MSET analyzes the effectiveness of an MC&A system based on defined performance metrics for MC&A functions defined based on U.S. and international best practices and regulations. MSET analysis is based on performance of the entire MC&A system including defense-in-depth attributes and sensitivity analysis of changes in the system, both positive and negative. MSET analysis considers: accounting; containment; access control; surveillance capabilities of the system; and other interfaces with the physical protection systems that provide detection of an unauthorized action. MSET performs a system effectiveness calculation evaluation against a defined performance metric. MSET uses PRA techniques to analyze the MC&A system. MSET is a tool for evaluating the system effectiveness of MC&A systems during self-assessment or external inspection. MSET has been developed, tested, and benchmarked by the U.S. DOE. In collaboration with the U.S. DOE, Rosatom is developing a Russian version (MSET-R) planned for pilot implementation at select material balance areas in 2011. MSET has been shown to be an effective training and communication tool for MC&A.

  19. Industrial Assessment Center

    SciTech Connect (OSTI)

    Dr. Diane Schaub

    2007-03-05T23:59:59.000Z

    Since its inception, the University of Florida Industrial Assessment Center has successfully completed close to 400 energy assessments of small to medium manufacturing facilities in Florida, southern Georgia and southern Alabama. Through these efforts, recommendations were made that would result in savings of about $5 million per year, with an implementation rate of 20-25%. Approximately 80 engineering students have worked for the UF-IAC, at least 10 of whom went on to work in energy related fields after graduation. Additionally, through the popular course in Industrial Energy Management, many students have graduated from the University of Florida with a strong understanding and support of energy conservation methods.

  20. Industrial Geospatial Analysis Tool for Energy Evaluation (IGATE-E)

    SciTech Connect (OSTI)

    Alkadi, Nasr E [ORNL] [ORNL; Starke, Michael R [ORNL] [ORNL; Ma, Ookie [DOE EERE] [DOE EERE; Nimbalkar, Sachin U [ORNL] [ORNL; Cox, Daryl [ORNL] [ORNL

    2013-01-01T23:59:59.000Z

    IGATE-E is an energy analysis tool for industrial energy evaluation. The tool applies statistical modeling to multiple publicly available datasets and provides information at the geospatial resolution of zip code using bottom up approaches. Within each zip code, the current version of the tool estimates electrical energy consumption of manufacturing industries based on each type of industries using DOE s Industrial Assessment Center database (IAC-DB) and DOE s Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition to other commercially available databases such as the Manufacturing News database (MNI, Inc.). Ongoing and future work include adding modules for the predictions of fuel energy consumption streams, manufacturing process steps energy consumption, major energy intensive processes (EIPs) within each industry type among other metrics of interest. The tool provides validation against DOE s EIA-MECS state level energy estimations and permits several statistical examinations. IGATE-E is intended to be a decision support and planning tool to a wide spectrum of energy analysts, researchers, government organizations, private consultants, industry partners, and alike.

  1. Heart Rate Artifact Suppression.

    E-Print Network [OSTI]

    Dickson, Christopher

    2012-01-01T23:59:59.000Z

    ??Motion artifact strongly corrupts heart rate measurements in current pulse oximetry systems. In many, almost any motion will greatly diminish the system抯 ability to extract (more)

  2. Residential Solar Valuation Rates

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Solar Valuation Rates Karl R. Rbago Rbago Energy LLC 1 The Ideal Residential Solar Tariff Fair to the utility and non-solar customers Fair compensation to...

  3. Effective Rate Period

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    charges or credits associated with the creation, termination, or modification to any tariff, contract, or rate schedule accepted or approved by the Federal Energy Regulatory...

  4. LCC Guidance Rates

    Broader source: Energy.gov [DOE]

    Notepad text file provides the LCC guidance rates in a numbered format for the various regions throughout the U.S.

  5. Technology Assessment

    Broader source: Energy.gov (indexed) [DOE]

    Roll to Roll (R2R) Processing 1 Technology Assessment 2 3 Contents 4 1. Introduction to the TechnologySystem ......

  6. National Energy Audit Tool for Multifamily Buildings Development Plan

    SciTech Connect (OSTI)

    Malhotra, Mini [ORNL; MacDonald, Michael [Sentech, Inc.; Accawi, Gina K [ORNL; New, Joshua Ryan [ORNL; Im, Piljae [ORNL

    2012-03-01T23:59:59.000Z

    The U.S. Department of Energy's (DOE's) Weatherization Assistance Program (WAP) enables low-income families to reduce their energy costs by providing funds to make their homes more energy efficient. In addition, the program funds Weatherization Training and Technical Assistance (T and TA) activities to support a range of program operations. These activities include measuring and documenting performance, monitoring programs, promoting advanced techniques and collaborations to further improve program effectiveness, and training, including developing tools and information resources. The T and TA plan outlines the tasks, activities, and milestones to support the weatherization network with the program implementation ramp up efforts. Weatherization of multifamily buildings has been recognized as an effective way to ramp up weatherization efforts. To support this effort, the 2009 National Weatherization T and TA plan includes the task of expanding the functionality of the Weatherization Assistant, a DOE-sponsored family of energy audit computer programs, to perform audits for large and small multifamily buildings This report describes the planning effort for a new multifamily energy audit tool for DOE's WAP. The functionality of the Weatherization Assistant is being expanded to also perform energy audits of small multifamily and large multifamily buildings. The process covers an assessment of needs that includes input from national experts during two national Web conferences. The assessment of needs is then translated into capability and performance descriptions for the proposed new multifamily energy audit, with some description of what might or should be provided in the new tool. The assessment of needs is combined with our best judgment to lay out a strategy for development of the multifamily tool that proceeds in stages, with features of an initial tool (version 1) and a more capable version 2 handled with currently available resources. Additional development in the future is expected to be needed if more capabilities are to be added. A rough schedule for development of the version 1 tool is presented. The components and capabilities described in this plan will serve as the starting point for development of the proposed new multifamily energy audit tool for WAP.

  7. Pollution prevention opportunity assessments, a training and resource guide

    SciTech Connect (OSTI)

    VALERO, O.J.

    1998-11-03T23:59:59.000Z

    The intention of the ''Pollution Prevention Opportunity Assessment Training and Resource Guide'' is to help Hanford waste generators identify ways to reduce waste through the Pollution Prevention Opportunity Assessment (P20A) process. This document presents pollution prevention tools and provides a step-by-step approach for conducting assessments.

  8. Advanced Electric Submersible Pump Design Tool for Geothermal Applications

    SciTech Connect (OSTI)

    Xuele Qi; Norman Turnquist; Farshad Ghasripoor

    2012-05-31T23:59:59.000Z

    Electrical Submersible Pumps (ESPs) present higher efficiency, larger production rate, and can be operated in deeper wells than the other geothermal artificial lifting systems. Enhanced Geothermal Systems (EGS) applications recommend lifting 300 C geothermal water at 80kg/s flow rate in a maximum 10-5/8-inch diameter wellbore to improve the cost-effectiveness. In this paper, an advanced ESP design tool comprising a 1D theoretical model and a 3D CFD analysis has been developed to design ESPs for geothermal applications. Design of Experiments was also performed to optimize the geometry and performance. The designed mixed-flow type centrifugal impeller and diffuser exhibit high efficiency and head rise under simulated EGS conditions. The design tool has been validated by comparing the prediction to experimental data of an existing ESP product.

  9. Intrusion detection sensor testing tools

    SciTech Connect (OSTI)

    Hayward, D.R.

    1994-08-01T23:59:59.000Z

    Intrusion detection sensors must be frequently tested to verify that they are operational, and they must be periodically tested to verify that they are functioning at required performance levels. Concerns involving this testing can include: The significant amount of manpower required, inconsistent results due to variability in methods and personnel, exposure of personnel to hazardous environments, and difficulty in obtaining access to the areas containing some of the intrusion sensors. To address these concerns, the Department of Energy directed Sandia National Labs. to develop intrusion detection sensor testing tools. Over the past two years Sandia has developed several sensor testing tool prototypes. This paper describes the evolution of an exterior intrusion detection sensor tester and automatic data logger, and also describes various interior intrusion detection sensor test fixtures that can be remotely activated to simulate an intruder.

  10. E-Print Network 3.0 - assessment lca methodology Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a tool to investigate the environmental... applications as transistors and electromagnetic interference (EMI) shielding). Life cycle assessment (LCA... Life Cycle ... Source:...

  11. Toole County Secondary Data Analysis

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    Infarction prevalence (Heart Attack) 4.4% 4.1% 6.0% All Sites Cancer 461.9 455.5 543.2 1 Community) Leading Causes of Death County1 Montana1,2 Nation2 1. Heart Disease 2. Cancer 3. CLRD* 1. Cancer 2. Heart Disease 3.CLRD* 1. Heart Disease 2. Cancer 3. CLRD* #12; Toole County Secondary Data

  12. Program Development Tools and Infrastructures

    SciTech Connect (OSTI)

    Schulz, M

    2012-03-12T23:59:59.000Z

    Exascale class machines will exhibit a new level of complexity: they will feature an unprecedented number of cores and threads, will most likely be heterogeneous and deeply hierarchical, and offer a range of new hardware techniques (such as speculative threading, transactional memory, programmable prefetching, and programmable accelerators), which all have to be utilized for an application to realize the full potential of the machine. Additionally, users will be faced with less memory per core, fixed total power budgets, and sharply reduced MTBFs. At the same time, it is expected that the complexity of applications will rise sharply for exascale systems, both to implement new science possible at exascale and to exploit the new hardware features necessary to achieve exascale performance. This is particularly true for many of the NNSA codes, which are large and often highly complex integrated simulation codes that push the limits of everything in the system including language features. To overcome these limitations and to enable users to reach exascale performance, users will expect a new generation of tools that address the bottlenecks of exascale machines, that work seamlessly with the (set of) programming models on the target machines, that scale with the machine, that provide automatic analysis capabilities, and that are flexible and modular enough to overcome the complexities and changing demands of the exascale architectures. Further, any tool must be robust enough to handle the complexity of large integrated codes while keeping the user's learning curve low. With the ASC program, in particular the CSSE (Computational Systems and Software Engineering) and CCE (Common Compute Environment) projects, we are working towards a new generation of tools that fulfill these requirements and that provide our users as well as the larger HPC community with the necessary tools, techniques, and methodologies required to make exascale performance a reality.

  13. Previous Power Rates (rates/current)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentations Presentations SortConferences PreviousRates

  14. Power Rate Cases (pbl/rates)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006PhotovoltaicSeptember 22,ReactorAbout Power > FinancialPowerRates

  15. Power Rates Announcements (pbl/rates)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006PhotovoltaicSeptember 22,ReactorAbout Power > FinancialPowerRates

  16. Rates Meetings and Workshops (pbl/rates)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor. |INCIDENCET3PACI-T3Rate

  17. Consequence Assessment

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-08-21T23:59:59.000Z

    This volume focuses on the process of performing timely initial assessments necessary to support critical first decisions and the continuous process of refining those initial assessments as more information and resources become available. Canceled by DOE G 151.1-4.

  18. APS Guideline for Hand Tool and Portable Power Tool Usage

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered聣PNGExperience4AJ01) (See95TI07)Operations2AP-XPSAPS Floor Coordinators APSHand Tool

  19. DEVELOPMENT OF A SCREENING TOOL FOR IDENTIFYING YOUNG PEOPLE AT RISK FOR NOISE-INDUCED HEARING LOSS

    E-Print Network [OSTI]

    Megerson, Susan C.

    2010-07-23T23:59:59.000Z

    This study surveyed common noise activities of young adults, quantified their annual equivalent noise exposures, and examined the efficacy of a self-assessment screening tool for identifying risk of noise-induced hearing ...

  20. SIZE DISTRIBUTION AND RATE OF PRODUCTION OF AIRBORNE PARTICULATE MATTER GENERATED DURING METAL CUTTING

    SciTech Connect (OSTI)

    M.A. Ebadian, Ph.D.; S.K. Dua, Ph.D., C.H.P.; Hillol Guha, Ph.D.

    2001-01-01T23:59:59.000Z

    During deactivation and decommissioning activities, thermal cutting tools, such as plasma torch, laser, and gasoline torch, are used to cut metals. These activities generate fumes, smoke and particulates. These airborne species of matter, called aerosols, may be inhaled if suitable respiratory protection is not used. Inhalation of the airborne metallic aerosols has been reported to cause ill health effects, such as acute respiratory syndrome and chromosome damage in lymphocytes. In the nuclear industry, metals may be contaminated with radioactive materials. Cutting these metals, as in size reduction of gloveboxes and tanks, produces high concentrations of airborne transuranic particles. Particles of the respirable size range (size < 10 {micro}m) deposit in various compartments of the respiratory tract, the fraction and the site in the respiratory tract depending on the size of the particles. The dose delivered to the respiratory tract depends on the size distribution of the airborne particulates (aerosols) and their concentration and radioactivity/toxicity. The concentration of airborne particulate matter in an environment is dependent upon the rate of their production and the ventilation rate. Thus, measuring aerosol size distribution and generation rate is important for (1) the assessment of inhalation exposures of workers, (2) the selection of respiratory protection equipment, and (3) the design of appropriate filtration systems. Size distribution of the aerosols generated during cutting of different metals by plasma torch was measured. Cutting rates of different metals, rate of generation of respirable mass, as well as the fraction of the released kerf that become respirable were determined. This report presents results of these studies. Measurements of the particles generated during cutting of metal plates with a plasma arc torch revealed the presence of particles with mass median aerodynamic diameters of particles close to 0.2 {micro}m, arising from condensation of vaporized material and subsequent rapid formation of aggregates. Particles of larger size, resulting from ejection of melted material or fragments from the cutting zone, were also observed. This study presents data regarding the metal cutting rate, particle size distribution, and their generation rate, while using different cutting tools and metals. The study shows that respirable particles constitute only a small fraction of the released kerf.

  1. Enabling streamlined life cycle assessment : materials-classification derived structured underspecification

    E-Print Network [OSTI]

    Rampuria, Abhishek

    2012-01-01T23:59:59.000Z

    As environmental footprint considerations for companies gain greater importance, the need for quantitative impact assessment tools such as life cycle assessment (LCA) has become a higher priority. Currently, the cost and ...

  2. Assessment of crack opening area for leak rates

    SciTech Connect (OSTI)

    Sharples, J.K.; Bouchard, P.J.

    1997-04-01T23:59:59.000Z

    This paper outlines the background to recommended crack opening area solutions given in a proposed revision to leak before break guidance for the R6 procedure. Comparisons with experimental and analytical results are given for some selected cases of circumferential cracks in cylinders. It is shown that elastic models can provide satisfactory estimations of crack opening displacement (and area) but they become increasingly conservative for values of L{sub r} greater than approximately 0.4. The Dugdale small scale yielding model gives conservative estimates of crack opening displacement with increasing enhancement for L{sub r} values greater than 0.4. Further validation of the elastic-plastic reference stress method for up to L{sub r} values of about 1.0 is presented by experimental and analytical comparisons. Although a more detailed method, its application gives a best estimate of crack opening displacement which may be substantially greater than small scale plasticity models. It is also shown that the local boundary conditions in pipework need to be carefully considered when evaluating crack opening area for through-wall bending stresses resulting from welding residual stresses or geometry discontinuities.

  3. ASSESSMENT OF RELEASE RATES FOR RADIONUCLIDES IN ACTIVATED CONCRETE.

    SciTech Connect (OSTI)

    SULLIVAN,T.M.

    2003-08-23T23:59:59.000Z

    The Maine Yankee (MY) nuclear power plant is undergoing the process of decontamination and decommissioning (D&D). Part of the process requires analyses that demonstrate that any radioactivity that remains after D&D will not cause exposure to radioactive contaminants to exceed acceptable limits. This requires knowledge of the distribution of radionuclides in the remaining material and their potential release mechanisms from the material to the contacting groundwater. In this study the concern involves radionuclide contamination in activated concrete in the ICI Sump below the containment building. Figures 1-3 are schematic representations of the ICI Sump. Figure 2 and 3 contain the relevant dimensions needed for the analysis. The key features of Figures 2 and 3 are the 3/8-inch carbon steel liner that isolates the activated concrete from the pit and the concrete wall, which is between 7 feet and 7 feet 2 inches thick. During operations, a small neutron flux from the reactor activated the carbon steel liner and the concrete outside the liner. Current MY plans call for filling the ICI sump with compacted sand.

  4. Selected Failure Rate Values from ITER Safety Assessment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBi (2) SrEvaluating the Seasonalsw ' b(SC) SeeingSeizing a

  5. Sandia National Laboratories: assess PV module degradation rates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1development Sandia, NREL Release Wavearc-fault circuit interrupter Sandia

  6. Built Environment Analysis Tool: April 2013

    SciTech Connect (OSTI)

    Porter, C.

    2013-05-01T23:59:59.000Z

    This documentation describes the tool development. It was created to evaluate the effects of built environment scenarios on transportation energy and greenhouse gas (GHG) emissions. This documentation also provides guidance on how to apply the tool.

  7. Remixing physical objects through tangible tools

    E-Print Network [OSTI]

    Follmer, Sean (Sean Weston)

    2011-01-01T23:59:59.000Z

    In this document we present new tools for remixing physical objects. These tools allow users to copy, edit and manipulate the properties of one or more objects to create a new physical object. We already have these ...

  8. Optimization of na飗e dynamic binary instrumentation Tools/

    E-Print Network [OSTI]

    Kleckner, Reid (Reid N.)

    2011-01-01T23:59:59.000Z

    The proliferation of dynamic program analysis tools has done much to ease the burden of developing complex software. However, creating such tools remains a challenge. Dynamic binary instrumentation frameworks such as ...

  9. Material feedback in digital design tools

    E-Print Network [OSTI]

    Stanton, Christian J

    2009-01-01T23:59:59.000Z

    How do design tools feedback material behavior to the designer? Digital design tools in use by designers today provide a rich environment for design of form but offer little feedback of the material that ultimately realize ...

  10. On Thermonuclear Reaction Rates

    E-Print Network [OSTI]

    H. J. Haubold; A. M. Mathai

    1996-12-02T23:59:59.000Z

    Nuclear reactions govern major aspects of the chemical evolution od galaxies and stars. Analytic study of the reaction rates and reaction probability integrals is attempted here. Exact expressions for the reaction rates and reaction probability integrals for nuclear reactions in the case of nonresonant, modified nonresonant, screened nonresonant and resonant cases are given. These are expressed in terms of H-functions, G-functions and in computable series forms. Computational aspects are also discussed.

  11. Boosted top: experimental tools overview

    E-Print Network [OSTI]

    Emanuele Usai; for the ATLAS; CMS Collaborations

    2015-01-05T23:59:59.000Z

    An overview of tools and methods for the reconstruction of high-boost top quark decays at the LHC is given in this report. The focus is on hadronic decays, in particular an overview of the current status of top quark taggers in physics analyses is presented. The most widely used jet substructure techniques, normally used in combination with top quark taggers, are reviewed. Special techniques to treat pileup in large cone jets are described, along with a comparison of the performance of several boosted top quark reconstruction techniques.

  12. Alternative Fuels Data Center: Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformationCenterResearch HighlightsTools Printable Version Share this resource Send a

  13. The Xygra gun simulation tool.

    SciTech Connect (OSTI)

    Garasi, Christopher Joseph; Lamppa, Derek C.; Aubuchon, Matthew S.; Shirley, David Noyes; Robinson, Allen Conrad; Russo, Thomas V.

    2008-12-01T23:59:59.000Z

    Inductive electromagnetic launchers, or coilguns, use discrete solenoidal coils to accelerate a coaxial conductive armature. To date, Sandia has been using an internally developed code, SLINGSHOT, as a point-mass lumped circuit element simulation tool for modeling coilgun behavior for design and verification purposes. This code has shortcomings in terms of accurately modeling gun performance under stressful electromagnetic propulsion environments. To correct for these limitations, it was decided to attempt to closely couple two Sandia simulation codes, Xyce and ALEGRA, to develop a more rigorous simulation capability for demanding launch applications. This report summarizes the modifications made to each respective code and the path forward to completing interfacing between them.

  14. mirabootcamp-tools-2014.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout SRNLBuildings andExternal LinksBG/Q Performance Tools

  15. Development of a HT Seismic Tool

    Broader source: Energy.gov [DOE]

    The program objective is to design; fabricate and field test two high temperature (HT) seismic tools in an EGS application.

  16. Better Buildings Neighborhood Program Decision Tool

    Broader source: Energy.gov [DOE]

    Provides an overview of the development of the Better Buildings Neighborhood Program decision tool, purpose, and scope.

  17. Marketing & Driving Demand Collaborative - Social Media Tools...

    Energy Savers [EERE]

    drivingdemandsocialmedia010611.pdf More Documents & Publications Marketing & Driving Demand: Social Media Tools & Strategies - January 16, 2011 Social Media for Natural...

  18. Risk Assessment

    Broader source: Energy.gov [DOE]

    A set of issues that state and local governments should carefully consider, with the goal of helping them assess and anticipate solutions for some worst case or unfortunate case scenarios as they...

  19. Puerto Rico Disaster Decision Support Tool

    E-Print Network [OSTI]

    Firestone, Jeremy

    Puerto Rico Disaster Decision Support Tool: An innovative step towards community resilience Support Tool Pilot Internet-based scalable mapping server Emergency management geo-referenced information for all municipalities in Puerto Rico #12;Disaster Decision Support Tool (DDST) What is a GIS

  20. Reporting Tools Course ID: FMS121

    E-Print Network [OSTI]

    Shull, Kenneth R.

    Reporting Tools Course ID: FMS121 PS Query 03/31/2009 漏 2009 Northwestern University FMS121 0 Introduction to Query For Query Developers Query is an ad-hoc reporting tool that allows you to retrieve data will have access to both query viewer and query manager pages. #12;Reporting Tools Course ID: FMS121 PS

  1. Reporting Tools Course ID: FMS121

    E-Print Network [OSTI]

    Shull, Kenneth R.

    Reporting Tools Course ID: FMS121 PS Query 03/31/2009 漏 2009 Northwestern University FMS121 0 Introduction to Query For Query Viewers Query is an ad-hoc reporting tool that allows you to retrieve data will have access to both query viewer and query manager pages. #12;Reporting Tools Course ID: FMS121 PS

  2. Development of risk-assessment methodology for municipal-sludge landfilling. Final report

    SciTech Connect (OSTI)

    Not Available

    1989-08-01T23:59:59.000Z

    This is one of a series of reports that present methodologies for assessing the potential risks to humans or other organisms from the disposal or reuse of municipal sludge. The sludge management practices addressed by this series include land application practices, distribution and marketing programs, landfilling, incineration and ocean disposal. These reports provide methods for evaluating potential health and environmental risks from toxic chemicals that may be present in sludge. The document addresses risks from chemicals associated with landfilling of municipal sludge. These proposed risk assessment procedures are designed as tools to assist in the development of regulations for sludge management practices. The criteria may address management practices (such as site design or process control specifications), limits on sludge disposal rates or limits on toxic chemical concentrations in the sludge.

  3. Life cycle assessment

    SciTech Connect (OSTI)

    Curran, M.A. [Environmental Protection Agency, Cincinnati, OH (United States)

    1994-12-31T23:59:59.000Z

    Life-Cycle Assessment (LCA) is a technical, data-based and holistic approach to define and subsequently reduce the environmental burdens associated with a product, process, or activity by identifying and quantifying energy and material usage and waste discharges, assessing the impact of those wastes on the environment, and evaluating and implementing opportunities to effect environmental improvements. The assessment includes the entire life-cycle of the product, process or activity encompassing extraction and processing of raw materials, manufacturing, transportation and distribution, use/reuse, recycling and final disposal. LCA is a useful tool for evaluating the environmental consequences of a product, process, or activity, however, current applications of LCA have not been performed in consistent or easily understood ways. This inconsistency has caused increased criticism of LCA. The EPA recognized the need to develop an LCA framework which could be used to provide consistent use across the board. Also, additional research is needed to enhance the understanding about the steps in the performance of an LCA and its appropriate usage. This paper will present the research activities of the EPA leading toward the development of an acceptable method for conducting LCA`s. This research has resulted in the development of two guidance manuals. The first manual is intended to be a practical guide to conducting and interpreting the life-cycle inventory. A nine-step approach to performing a comprehensive inventory is presented along with the general issues to be addressed. The second manual addresses life-cycle design.

  4. Nuclear Tools For Oilfield Logging-While-Drilling Applications

    SciTech Connect (OSTI)

    Reijonen, Jani [Schlumberger PTC, 20 Wallace Rd., Princeton Junction, NJ 08550 (United States)

    2011-06-01T23:59:59.000Z

    Schlumberger is an international oilfield service company with nearly 80,000 employees of 140 nationalities, operating globally in 80 countries. As a market leader in oilfield services, Schlumberger has developed a suite of technologies to assess the downhole environment, including, among others, electromagnetic, seismic, chemical, and nuclear measurements. In the past 10 years there has been a radical shift in the oilfield service industry from traditional wireline measurements to logging-while-drilling (LWD) analysis. For LWD measurements, the analysis is performed and the instruments are operated while the borehole is being drilled. The high temperature, high shock, and extreme vibration environment of LWD imposes stringent requirements for the devices used in these applications. This has a significant impact on the design of the components and subcomponents of a downhole tool. Another significant change in the past few years for nuclear-based oilwell logging tools is the desire to replace the sealed radioisotope sources with active, electronic ones. These active radiation sources provide great benefits compared to the isotopic sources, ranging from handling and safety to nonproliferation and well contamination issues. The challenge is to develop electronic generators that have a high degree of reliability for the entire lifetime of a downhole tool. LWD tool testing and operations are highlighted with particular emphasis on electronic radiation sources and nuclear detectors for the downhole environment.

  5. Sustainability Assessment of Residential Building Energy System in Belgrade

    E-Print Network [OSTI]

    Vucicevic, B.; Bakic, V.; Jovanovic, M.; Turanjanin, V.

    2010-01-01T23:59:59.000Z

    of harmful substances. Multi-criteria method is a basic tool for the sustainability assessment in metropolitan cities. The design of potential options is the first step in the evaluation of buildings. The selection of a number of residential buildings...

  6. Computer-based tools for decision support at the Hanford Site

    SciTech Connect (OSTI)

    Doctor, P.G.; Mahaffey, J.A.; Cowley, P.J.; Freshley, M.D.; Hassig, N.L.; Brothers, J.W.; Glantz, C.S.; Strachan, D.M.

    1992-11-01T23:59:59.000Z

    To help integrate activities in the environmental restoration and waste management mission of the Hanford Site, the Hanford Integrated Planning Project (HIPP) was established and funded by the US Department of Energy. The project is divided into three key program elements, the first focusing on an explicit, defensible and comprehensive method for evaluating technical options. Based on the premise that computer technology can be used to support the decision-making process and facilitate integration among programs and activities, the Decision Support Tools Task was charged with assessing the status of computer technology for those purposes at the Site. The task addressed two types of tools: tools need to provide technical information and management support tools. Technical tools include performance and risk assessment models, information management systems, data and the computer infrastructure to supports models, data, and information management systems. Management decision support tools are used to synthesize information at a high' level to assist with making decisions. The major conclusions resulting from the assessment are that there is much technical information available, but it is not reaching the decision-makers in a form to be used. Many existing tools provide components that are needed to integrate site activities; however, some components are missing and, more importantly, the glue'' or connections to tie the components together to answer decision-makers questions is largely absent. Top priority should be given to decision support tools that support activities given in the TPA. Other decision tools are needed to facilitate and support the environmental restoration and waste management mission.

  7. Computer-based tools for decision support at the Hanford Site

    SciTech Connect (OSTI)

    Doctor, P.G.; Mahaffey, J.A.; Cowley, P.J.; Freshley, M.D.; Hassig, N.L.; Brothers, J.W.; Glantz, C.S.; Strachan, D.M.

    1992-11-01T23:59:59.000Z

    To help integrate activities in the environmental restoration and waste management mission of the Hanford Site, the Hanford Integrated Planning Project (HIPP) was established and funded by the US Department of Energy. The project is divided into three key program elements, the first focusing on an explicit, defensible and comprehensive method for evaluating technical options. Based on the premise that computer technology can be used to support the decision-making process and facilitate integration among programs and activities, the Decision Support Tools Task was charged with assessing the status of computer technology for those purposes at the Site. The task addressed two types of tools: tools need to provide technical information and management support tools. Technical tools include performance and risk assessment models, information management systems, data and the computer infrastructure to supports models, data, and information management systems. Management decision support tools are used to synthesize information at a high` level to assist with making decisions. The major conclusions resulting from the assessment are that there is much technical information available, but it is not reaching the decision-makers in a form to be used. Many existing tools provide components that are needed to integrate site activities; however, some components are missing and, more importantly, the ``glue`` or connections to tie the components together to answer decision-makers questions is largely absent. Top priority should be given to decision support tools that support activities given in the TPA. Other decision tools are needed to facilitate and support the environmental restoration and waste management mission.

  8. Integrated Safeguards and Security Management Self-Assessment 2004

    SciTech Connect (OSTI)

    Lunford, Dan; Ramsey, Dwayne

    2005-04-01T23:59:59.000Z

    In 2002 Ernest Orlando Lawrence Berkeley National Laboratory deployed the first Integrated Safeguards and Security Management (ISSM) Self-Assessment process, designed to measure the effect of the Laboratory's ISSM efforts. This process was recognized by DOE as a best practice and model program for self-assessment and training. In 2004, the second Self-Assessment was launched. The cornerstone of this process was an employee survey that was designed to meet several objectives: (1) Ensure that Laboratory assets are protected. (2) Provide a measurement of the Laboratory's current security status that can be compared against the 2002 Self-Assessment baseline. (3) Educate all Laboratory staff about security responsibilities, tools, and practices. (4) Provide security staff with feedback on the effectiveness of security programs. (5) Provide line management with the information they need to make informed decisions about security. This 2004 Self Assessment process began in July 2004 with every employee receiving an information packet and instructions for completing the ISSM survey. The Laboratory-wide survey contained questions designed to measure awareness and conformance to policy and best practices. The survey response was excellent--90% of Berkeley Lab employees completed the questionnaire. ISSM liaisons from each division followed up on the initial survey results with individual employees to improve awareness and resolve ambiguities uncovered by the questionnaire. As with the 2002 survey, the Self-Assessment produced immediate positive results for the ISSM program and revealed opportunities for longer-term corrective actions. Results of the questionnaire provided information for organizational profiles and an institutional summary. The overall level of security protection and awareness was very high--often above 90%. Post-survey work by the ISSM liaisons and line management consistently led to improved awareness and metrics, as shown by a comparison of profiles at the end of phase one (August 6, 2004) and phase two (November 1, 2004). The Self-Assessment confirmed that classified information is not held or processed at Berkeley Lab. The survey results also identified areas where increased employee knowledge and awareness of Laboratory policy would be beneficial, the two most prominent being password usage and wireless network service. Line management will be able to determine additional corrective actions based on the results of the Self-Assessment. Future assessments will raise the ratings bar for some existing program elements and add new elements to stimulate further improvements in Laboratory security.

  9. IMPORTANCE OF SAFETY CULTURE ASSESSMENT

    SciTech Connect (OSTI)

    Spitalnik, J.

    2004-10-06T23:59:59.000Z

    Safety Management has lately been considered by some Nuclear Regulatory agencies as the tool on which to concentrate their efforts to implement modern regulation structures, because Safety Culture was said to be difficult to monitor. However, Safety Culture can be assessed and monitored even if it is problematical to make Safety Culture the object of regulation. This paper stresses the feasibility and importance of Safety Culture Assessment based on self-assessment applications performed in several nuclear organizations in Latin America. Reasons and ownership for assessing Safety Culture are discussed, and relevant aspects considered for setting up and programming such an assessment are shown. Basic principles that were taken into account, as well as financial and human resources used in actual self-assessments are reviewed, including the importance of adequate statistical analyses and the necessity of proper feed-back of results. The setting up of action plans to enhance Safety Culture is the final step of the assessment program that once implemented will enable to establish a Safety Culture monitoring process within the organization.

  10. Feedback enhanced plasma spray tool

    DOE Patents [OSTI]

    Gevelber, Michael Alan; Wroblewski, Donald Edward; Fincke, James Russell; Swank, William David; Haggard, Delon C.; Bewley, Randy Lee

    2005-11-22T23:59:59.000Z

    An improved automatic feedback control scheme enhances plasma spraying of powdered material through reduction of process variability and providing better ability to engineer coating structure. The present inventors discovered that controlling centroid position of the spatial distribution along with other output parameters, such as particle temperature, particle velocity, and molten mass flux rate, vastly increases control over the sprayed coating structure, including vertical and horizontal cracks, voids, and porosity. It also allows improved control over graded layers or compositionally varying layers of material, reduces variations, including variation in coating thickness, and allows increasing deposition rate. Various measurement and system control schemes are provided.

  11. GENERAL TUITION RATES UNDERGRADUATES

    E-Print Network [OSTI]

    Amin, S. Massoud

    GRADUATE PROGRAMS Credit plateaus vary by school or program. Each credit above the plateau is assessed on a per-credit basis. Continuing Education, College of Master of Biological Sciences Resident to their colleges for exceptions to full-time classifications. STUDENT SERVICES FEE All students enrolled for 6

  12. Process for selecting engineering tools : applied to selecting a SysML tool.

    SciTech Connect (OSTI)

    De Spain, Mark J.; Post, Debra S. (Sandia National Laboratories, Livermore, CA); Taylor, Jeffrey L.; De Jong, Kent

    2011-02-01T23:59:59.000Z

    Process for Selecting Engineering Tools outlines the process and tools used to select a SysML (Systems Modeling Language) tool. The process is general in nature and users could use the process to select most engineering tools and software applications.

  13. Your FAFSA and the IRS Data Retrieval Tool What is the IRS Data Retrieval Tool?

    E-Print Network [OSTI]

    Moore, Paul A.

    Your FAFSA and the IRS Data Retrieval Tool What is the IRS Data Retrieval Tool? The U.S. Department of Education and the Internal Revenue Service (IRS) have collaborated to develop a tool that simplifies the completion of the FAFSA application. The IRS Data Retrieval tool allows FAFSA applicants and parents

  14. Rates and Repayment Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor.Tariff Rates FY 2015 Rates

  15. Augmented reality building operations tool

    DOE Patents [OSTI]

    Brackney, Larry J.

    2014-09-09T23:59:59.000Z

    A method (700) for providing an augmented reality operations tool to a mobile client (642) positioned in a building (604). The method (700) includes, with a server (660), receiving (720) from the client (642) an augmented reality request for building system equipment (612) managed by an energy management system (EMS) (620). The method (700) includes transmitting (740) a data request for the equipment (612) to the EMS (620) and receiving (750) building management data (634) for the equipment (612). The method (700) includes generating (760) an overlay (656) with an object created based on the building management data (634), which may be sensor data, diagnostic procedures, or the like. The overlay (656) is configured for concurrent display on a display screen (652) of the client (642) with a real-time image of the building equipment (612). The method (700) includes transmitting (770) the overlay (656) to the client (642).

  16. Sustainable systems rating program: Marketing Green'' Building in Austin, Texas

    SciTech Connect (OSTI)

    Not Available

    1991-12-01T23:59:59.000Z

    Four major resource issues for home construction were identified: water, energy, materials, and waste. A systems flow model was then developed that tracked the resource issues through interactive matrices in the areas of sourcing, processing, using, and disposing or recycling. This model served as the basis for a rating system used in an educational and marketing tool called the Eco-Home Guide.

  17. Sustainable systems rating program: Marketing ``Green`` Building in Austin, Texas

    SciTech Connect (OSTI)

    Not Available

    1991-12-01T23:59:59.000Z

    Four major resource issues for home construction were identified: water, energy, materials, and waste. A systems flow model was then developed that tracked the resource issues through interactive matrices in the areas of sourcing, processing, using, and disposing or recycling. This model served as the basis for a rating system used in an educational and marketing tool called the Eco-Home Guide.

  18. PROCEEDINGS OF THE PELAGIC LONGLINE CATCH RATE STANDARDIZATION MEETING

    E-Print Network [OSTI]

    Hawai'i at Manoa, University of

    PROCEEDINGS OF THE PELAGIC LONGLINE CATCH RATE STANDARDIZATION MEETING February 12-16, 2007 Imin;#12;Pelagic longline catch rate standardization meeting, Feb 2007 Table of Contents Introduction........................................................................................................... 6 1. Overview of longline effort standardizations in current Pacific HMS assessments... 6 2. Models

  19. Integrated Environmental Assessment Part III: Exposure Assessment

    E-Print Network [OSTI]

    McKone, Thomas E.; Small, Mitchell J.

    2006-01-01T23:59:59.000Z

    issues such as life cycle assessment (LCA) fosters the needlife-cycle impact assessment (LCIA) process within in LCA is

  20. Machine Tool Design and Operation Strategies for Green Manufacturing

    E-Print Network [OSTI]

    2010-01-01T23:59:59.000Z

    Power Demand of Precision Machine Tools, MS Thesis, Dept.Environmental Burden for Machine Tool Operation, JSME Int.of Downsized Design for Machine Tools on the Environmental

  1. DEVELOPMENT OF AN INTRA-FACILITY CONTINUING EDUCATION PLANNING TOOL

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    DEVELOPMENT OF AN INTRA-FACILITY CONTINUING EDUCATION PLANNING TOOL by Lori Anne Chovanak EDUCATION PLANNING TOOL............................................................................... 1..................................................................................... 8 Value of the Intra-facility Continuing Education Tool

  2. A comparison between two underfloor air distribution (UFAD) design tools

    E-Print Network [OSTI]

    Chen, Bin; Schiavon, Stefano; Bauman, Fred S; Chen, Qingyan

    2014-01-01T23:59:59.000Z

    TWO UNDERFLOOR AIR DISTRIBUTION (UFAD) DESIGN TOOLS Bin CHENunderfloor air distribution (UFAD) design tools (ASHRAE RP-air distribution (UFAD), Cooling load, Design tool, HVAC

  3. Building America Webinar: Building America Research Tools | Department...

    Energy Savers [EERE]

    Building America Research Tools Building America Webinar: Building America Research Tools This webinar was held on March 18, 2015, and reviewed Building America research tools,...

  4. High Performance Lipoprotein Profiling for Cardiovascular Risk Assessment

    E-Print Network [OSTI]

    Larner, Craig

    2012-10-19T23:59:59.000Z

    With the severity of cardiovascular disease (CVD) and the related mortality rate to this disease, new methods are necessary for risk assessment and treatment prior to the onset of the disease. The current paradigm in CVD risk assessment has shifted...

  5. RISK REDUCTION WITH A FUZZY EXPERT EXPLORATION TOOL

    SciTech Connect (OSTI)

    Robert Balch

    2004-04-08T23:59:59.000Z

    Incomplete or sparse information on types of data such as geologic or formation characteristics introduces a high level of risk for oil exploration and development projects. ''Expert'' systems developed and used in several disciplines and industries have demonstrated beneficial results. A state-of-the-art exploration ''expert'' tool, relying on a computerized database and computer maps generated by neural networks, is being developed through the use of ''fuzzy'' logic, a relatively new mathematical treatment of imprecise or non-explicit parameters and values. Oil prospecting risk can be reduced with the use of a properly developed and validated ''Fuzzy Expert Exploration (FEE) Tool.'' This FEE Tool can be beneficial in many regions of the U.S. by enabling risk reduction in oil and gas prospecting as well as decreased prospecting and development costs. In the 1998-1999 oil industry environment, many smaller exploration companies lacked the resources of a pool of expert exploration personnel. Downsizing, low oil prices, and scarcity of exploration funds have also affected larger companies, and will, with time, affect the end users of oil industry products in the U.S. as reserves are depleted. The FEE Tool will benefit a diverse group in the U.S., leading to a more efficient use of scarce funds, and possibly decreasing dependence on foreign oil and lower product prices for consumers. This fifth annual (and tenth of 12 semi-annual reports) contains a summary of progress to date, problems encountered, plans for the next year, and an assessment of the prospects for future progress. The emphasis during the March 2003 through March 2004 period was directed toward completion of the Brushy Canyon FEE Tool and to Silurian-Devonian geology, and development of rules for the Devonian fuzzy system, and on-line software.

  6. Eddy current NDE performance demonstrations using simulation tools

    SciTech Connect (OSTI)

    Maurice, L. [EDF - CEIDRE, 2 rue Ampere, 93206 Saint-Denis Cedex 1 (France); Costan, V.; Guillot, E.; Thomas, P. [EDF - R and D, THEMIS, 1, avenue du General de Gaulle, 92141 Clamart (France)

    2013-01-25T23:59:59.000Z

    To carry out performance demonstrations of the Eddy-Current NDE processes applied on French nuclear power plants, EDF studies the possibility of using simulation tools as an alternative to measurements on steam generator tube mocks-up. This paper focuses on the strategy led by EDF to assess and use code{sub C}armel3D and Civa, on the case of Eddy-Current NDE on wears problem which may appear in the U-shape region of steam generator tubes due to the rubbing of anti-vibration bars.

  7. Dose Rates for Various Loading Patterns of Spent Fuel Assemblies in a Dry Cask

    SciTech Connect (OSTI)

    Jenquin, Urban P. (BATTELLE (PACIFIC NW LAB))

    2001-01-01T23:59:59.000Z

    Shielding calculations were performed to assess the impact of loading various combinations of spent fuel on dose rates and fuel temperature in a dry storage cask.

  8. Deconvolution of variable rate reservoir performance data using B-splines

    E-Print Network [OSTI]

    Ilk, Dilhan

    2007-04-25T23:59:59.000Z

    of permanent downhole gauges and large-scale processing/analysis of production data. Under these circumstances, our objective is to create a robust and practical tool which can tolerate reasonable variability and relatively large errors in rate and pressure...

  9. A landslide risk rating system for the Baguio City, Philippines area

    E-Print Network [OSTI]

    Saldivar-Sali, Artessa Niccola D., 1980-

    2004-01-01T23:59:59.000Z

    This research formulates a LANDSLIDE RISK RATING SYSTEM for the Greater Baguio area in the Philippines. It is hoped that the tool will be made a part of the physical/urban planning process when used by engineers and planners ...

  10. EPA ENERGY STAR Webcast: ENERGY STAR and Green Building Rating Systems

    Office of Energy Efficiency and Renewable Energy (EERE)

    During this session, attendees will learn how to use EPA tools and resources to help meet requirements for green building rating systems such as the U.S. Green Building Council抯 Leadership in...

  11. Development of Functionally Graded Materials for Manufacturing Tools and Dies and Industrial Processing Equipment

    SciTech Connect (OSTI)

    Lherbier, Louis, W.; Novotnak, David, J.; Herling, Darrell, R.; Sears, James, W.

    2009-03-23T23:59:59.000Z

    Hot forming processes such as forging, die casting and glass forming require tooling that is subjected to high temperatures during the manufacturing of components. Current tooling is adversely affected by prolonged exposure at high temperatures. Initial studies were conducted to determine the root cause of tool failures in a number of applications. Results show that tool failures vary and depend on the operating environment under which they are used. Major root cause failures include (1) thermal softening, (2) fatigue and (3) tool erosion, all of which are affected by process boundary conditions such as lubrication, cooling, process speed, etc. While thermal management is a key to addressing tooling failures, it was clear that new tooling materials with superior high temperature strength could provide improved manufacturing efficiencies. These efficiencies are based on the use of functionally graded materials (FGM), a new subset of hybrid tools with customizable properties that can be fabricated using advanced powder metallurgy manufacturing technologies. Modeling studies of the various hot forming processes helped identify the effect of key variables such as stress, temperature and cooling rate and aid in the selection of tooling materials for specific applications. To address the problem of high temperature strength, several advanced powder metallurgy nickel and cobalt based alloys were selected for evaluation. These materials were manufactured into tooling using two relatively new consolidation processes. One process involved laser powder deposition (LPD) and the second involved a solid state dynamic powder consolidation (SSDPC) process. These processes made possible functionally graded materials (FGM) that resulted in shaped tooling that was monolithic, bi-metallic or substrate coated. Manufacturing of tooling with these processes was determined to be robust and consistent for a variety of materials. Prototype and production testing of FGM tooling showed the benefits of the nickel and cobalt based powder metallurgy alloys in a number of applications evaluated. Improvements in tool life ranged from three (3) to twenty (20) or more times than currently used tooling. Improvements were most dramatic where tool softening and deformation were the major cause of tool failures in hot/warm forging applications. Significant improvement was also noted in erosion of aluminum die casting tooling. Cost and energy savings can be realized as a result of increased tooling life, increased productivity and a reduction in scrap because of improved dimensional controls. Although LPD and SSDPC tooling usually have higher acquisition costs, net tooling costs per component produced drops dramatically with superior tool performance. Less energy is used to manufacture the tooling because fewer tools are required and less recycling of used tools are needed for the hot forming process. Energy is saved during the component manufacturing cycle because more parts can be produced in shorter periods of time. Energy is also saved by minimizing heating furnace idling time because of less downtime for tooling changes.

  12. An Analysis of Energy Savings Possible Through Advances in Automotive Tooling Technology

    SciTech Connect (OSTI)

    Rick Schmoyer, RLS

    2004-12-03T23:59:59.000Z

    The use of lightweight and highly formable advanced materials in automobile and truck manufacturing has the potential to save fuel. Advances in tooling technology would promote the use of these materials. This report describes an energy savings analysis performed to approximate the potential fuel savings and consequential carbon-emission reductions that would be possible because of advances in tooling in the manufacturing of, in particular, non-powertrain components of passenger cars and heavy trucks. Separate energy analyses are performed for cars and heavy trucks. Heavy trucks are considered to be Class 7 and 8 trucks (trucks rated over 26,000 lbs gross vehicle weight). A critical input to the analysis is a set of estimates of the percentage reductions in weight and drag that could be achieved by the implementation of advanced materials, as a consequence of improved tooling technology, which were obtained by surveying tooling industry experts who attended a DOE Workshop, Tooling Technology for Low-Volume Vehicle Production, held in Seattle and Detroit in October and November 2003. The analysis is also based on 2001 fuel consumption totals and on energy-audit component proportions of fuel use due to drag, rolling resistance, and braking. The consumption proportions are assumed constant over time, but an allowance is made for fleet growth. The savings for a particular component is then the product of total fuel consumption, the percentage reduction of the component, and the energy audit component proportion. Fuel savings estimates for trucks also account for weight-limited versus volume-limited operations. Energy savings are assumed to be of two types: (1) direct energy savings incurred through reduced forces that must be overcome to move the vehicle or to slow it down in braking. and (2) indirect energy savings through reductions in the required engine power, the production and transmission of which incur thermodynamic losses, internal friction, and other inefficiencies. Total savings for an energy use component are estimated by scaling up the direct savings with an approximate total-to-direct savings ratio. Market penetration for new technology vehicles is estimated from projections about scrappage. Retrofit savings are assumed negligible, but savings are also assumed to accrue with increases in the fleet size, based on economic growth forecasts. It is assumed that as vehicles in the current fleet are scrapped, they are replaced with advanced-technology vehicles. Saving estimates are based on proportions of new vehicles, rather than new-vehicle mileages. In practice, of course, scrapped vehicles are often replaced with used vehicles, and used vehicles are replaced with new vehicles. Because new vehicles are typically driven more than old, savings estimates based on count rather than mileage proportions tend to be biased down (i.e., conservative). Savings are expressed in terms of gallons of fuel saved, metric tons of CO2 emissions reductions, and percentages relative to 2001 levels of fuel and CO2. The sensitivity of the savings projections to inputs such as energy-audit proportions of fuel consumed for rolling resistance, drag, braking, etc. is assessed by considering different scenarios. Though based on many approximations, the estimates approximate the potential energy savings possible because of improvements in tooling. For heavy trucks, annual diesel savings of 2.4-6.8 percent, and cumulative savings on the order of 54-154 percent, of 2001 consumption could accrue by 2050. By 2050, annual gasoline savings of 2.8-12 percent, and cumulative savings on the order of 83-350 percent of 2001 consumption could accrue for cars.

  13. Manipulative Virtual Tools for Tool Mark Characterization | The Ames

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and InterfacesAdministration -LowellforRatesManhattan

  14. Collaboration Leads to State-of-the-Art Energy Auditing Tool: Project Highlights (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-03-01T23:59:59.000Z

    This fact sheet describes the tablet-based simuwatt Audit tool, which uses NREL's advanced energy modeling framework and building energy audit processes, collaboration tools, in-app media, and private company concept3D's geometric capture software combined with real-time connections to large sets of standardized data to perform building energy audits faster than traditional methods. By integrating the NREL Building Component Library, utility rates, weather information, and energy conservation measures, the tool provides investment-grade audits that cost 75% less than traditional audits and stores the data in a consistent and reusable format.

  15. PLANNING TOOLS FOR ESTIMATING RADIATION EXPOSURE AT THE NATIONAL IGNITION FACILITY

    SciTech Connect (OSTI)

    Verbeke, J; Young, M; Brereton, S; Dauffy, L; Hall, J; Hansen, L; Khater, H; Kim, S; Pohl, B; Sitaraman, S

    2010-10-22T23:59:59.000Z

    A set of computational tools was developed to help estimate and minimize potential radiation exposure to workers from material activation in the National Ignition Facility (NIF). AAMI (Automated ALARA-MCNP Interface) provides an efficient, automated mechanism to perform the series of calculations required to create dose rate maps for the entire facility with minimal manual user input. NEET (NIF Exposure Estimation Tool) is a web application that combines the information computed by AAMI with a given shot schedule to compute and display the dose rate maps as a function of time. AAMI and NEET are currently used as work planning tools to determine stay-out times for workers following a given shot or set of shots, and to help in estimating integrated doses associated with performing various maintenance activities inside the target bay. Dose rate maps of the target bay were generated following a low-yield 10{sup 16} D-T shot and will be presented in this paper.

  16. ADVANCED POWER SYSTEMS ANALYSIS TOOLS

    SciTech Connect (OSTI)

    Robert R. Jensen; Steven A. Benson; Jason D. Laumb

    2001-08-31T23:59:59.000Z

    The use of Energy and Environmental Research Center (EERC) modeling tools and improved analytical methods has provided key information in optimizing advanced power system design and operating conditions for efficiency, producing minimal air pollutant emissions and utilizing a wide range of fossil fuel properties. This project was divided into four tasks: the demonstration of the ash transformation model, upgrading spreadsheet tools, enhancements to analytical capabilities using the scanning electron microscopy (SEM), and improvements to the slag viscosity model. The ash transformation model, Atran, was used to predict the size and composition of ash particles, which has a major impact on the fate of the combustion system. To optimize Atran key factors such as mineral fragmentation and coalescence, the heterogeneous and homogeneous interaction of the organically associated elements must be considered as they are applied to the operating conditions. The resulting model's ash composition compares favorably to measured results. Enhancements to existing EERC spreadsheet application included upgrading interactive spreadsheets to calculate the thermodynamic properties for fuels, reactants, products, and steam with Newton Raphson algorithms to perform calculations on mass, energy, and elemental balances, isentropic expansion of steam, and gasifier equilibrium conditions. Derivative calculations can be performed to estimate fuel heating values, adiabatic flame temperatures, emission factors, comparative fuel costs, and per-unit carbon taxes from fuel analyses. Using state-of-the-art computer-controlled scanning electron microscopes and associated microanalysis systems, a method to determine viscosity using the incorporation of grey-scale binning acquired by the SEM image was developed. The image analysis capabilities of a backscattered electron image can be subdivided into various grey-scale ranges that can be analyzed separately. Since the grey scale's intensity is dependent on the chemistry of the particle, it is possible to map chemically similar areas which can also be related to the viscosity of that compound at temperature. A second method was also developed to determine the elements associated with the organic matrix of the coals, which is currently determined by chemical fractionation. Mineral compositions and mineral densities can be determined for both included and excluded minerals, as well as the fraction of the ash that will be represented by that mineral on a frame-by-frame basis. The slag viscosity model was improved to provide improved predictions of slag viscosity and temperature of critical viscosity for representative Powder River Basin subbituminous and lignite coals.

  17. Rotary fast tool servo system and methods

    DOE Patents [OSTI]

    Montesanti, Richard C. (Cambridge, MA); Trumper, David L. (Plaistow, NH)

    2007-10-02T23:59:59.000Z

    A high bandwidth rotary fast tool servo provides tool motion in a direction nominally parallel to the surface-normal of a workpiece at the point of contact between the cutting tool and workpiece. Three or more flexure blades having all ends fixed are used to form an axis of rotation for a swing arm that carries a cutting tool at a set radius from the axis of rotation. An actuator rotates a swing arm assembly such that a cutting tool is moved in and away from the lathe-mounted, rotating workpiece in a rapid and controlled manner in order to machine the workpiece. A pair of position sensors provides rotation and position information for a swing arm to a control system. A control system commands and coordinates motion of the fast tool servo with the motion of a spindle, rotating table, cross-feed slide, and in-feed slide of a precision lathe.

  18. Critical reaction rates in hypersonic combustion chemistry

    SciTech Connect (OSTI)

    Oldenborg, R.C.; Harradine, D.M.; Loge, G.W.; Lyman, J.L.; Schott, G.L.; Winn, K.R.

    1989-01-01T23:59:59.000Z

    High Mach number flight requires that the scramjet propulsion system operate at a relatively low static inlet pressure and a high inlet temperature. These two constraints can lead to extremely high temperatures in the combustor, yielding high densities of radical species and correspondingly poor chemical combustion efficiency. As the temperature drops in the nozzle expansion, recombination of these excess radicals can produce more product species, higher heat yield, and potentially more thrust. The extent to which the chemical efficiency can be enhanced in the nozzle expansion depends directly on the rate of the radical recombination reactions. A comprehensive assessment of the important chemical processes and an experimental validation of the critical rate parameters is therefore required if accurate predictions of scramjet performance are to be obtained. This report covers the identification of critical reactions, and the critical reaction rates in hypersonic combustion chemistry. 4 refs., 2 figs.

  19. Measure Your Sew - How: Sewing Tools.

    E-Print Network [OSTI]

    Saunders, Becky

    1979-01-01T23:59:59.000Z

    in this series . ? Extension clothing specialist. The Texas A&M University System. Measuring Measuring tools are important in fitting to obtain a symmetrical appearance. Most measuring tools available today are marked in inches and yards as well... as centimeters and meters. Select tools with numbers clearly printed in the units needed. Measure often and accurately for sewing success. Essentials Ruler. A 12- to 18-inch (30-46 cm) ruler in plastic or other transparent material is ideal for measuring...

  20. EERE's State & Local Energy Data Tool

    SciTech Connect (OSTI)

    Shambarger, Erick; DeCesaro, Jennifer

    2014-06-23T23:59:59.000Z

    EERE's State and Local Energy Data (SLED) Tool provides basic energy market information that can help state and local governments plan and implement clean energy projects, including electricity generation; fuel sources and costs; applicable policies, regulations, and financial incentives; and renewable energy resource potential. Watch this video to learn more about the tool and hear testimonials from real users about the benefits of using this tool.

  1. EERE's State & Local Energy Data Tool

    ScienceCinema (OSTI)

    Shambarger, Erick; DeCesaro, Jennifer

    2014-06-26T23:59:59.000Z

    EERE's State and Local Energy Data (SLED) Tool provides basic energy market information that can help state and local governments plan and implement clean energy projects, including electricity generation; fuel sources and costs; applicable policies, regulations, and financial incentives; and renewable energy resource potential. Watch this video to learn more about the tool and hear testimonials from real users about the benefits of using this tool.

  2. Science with Virtual Observatory Tools

    E-Print Network [OSTI]

    P. Padovani

    2004-11-12T23:59:59.000Z

    The Virtual Observatory is now mature enough to produce cutting-edge science results. The exploitation of astronomical data beyond classical identification limits with interoperable tools for statistical identification of sources has become a reality. I present the discovery of 68 optically faint, obscured (i.e., type 2) active galactic nuclei (AGN) candidates in the two GOODS fields using the Astrophysical Virtual Observatory (AVO) prototype. Thirty-one of these sources have high estimated X-ray powers (>10^44 erg/s) and therefore qualify as optically obscured quasars, the so-called QSO 2. The number of these objects in the GOODS fields is now 40, an improvement of a factor > 4 when compared to the only 9 such sources previously known. By going ~ 3 magnitudes fainter than previously known type 2 AGN in the GOODS fields the AVO is sampling a region of redshift -- power space much harder to reach with classical methods. I also discuss the AVO move to our next phase, the EURO-VO, and our short-term plans to continue doing science with the Virtual Observatory.

  3. Buildings Performance Database Analysis Tools | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Save Consumers Billions Tools EnergyPlus Whole Building Energy Simulation OpenStudio Energy Simulation Application Suite Buildings Performance Database Building Energy...

  4. Understanding teacher beliefs with reflective tools

    E-Print Network [OSTI]

    Karwan, Vanessa Ann

    2009-01-01T23:59:59.000Z

    Reflective Tools by Vanessa Ann Karwan Doctor of EducationLeadership by Vanessa Ann Karwan Committee in charge:Kathleen Cohn Copyright Vanessa Ann Karwan, 2009 All rights

  5. Identify Institutional Change Tools for Sustainability

    Broader source: Energy.gov [DOE]

    After identifying institutional change rules and roles, a Federal agency should identify the tools that create the infrastructural context within which it can achieve its sustainability goals.

  6. Cooling load design tool for UFAD systems.

    E-Print Network [OSTI]

    Bauman, Fred; Schiavon, Stefano; Webster, Tom; Lee, Kwang Ho

    2010-01-01T23:59:59.000Z

    Underfloor Air Distribution (UFAD) Design Guide. Atlanta:Load Design Tool for Underfloor Air Distribution Systems. 攆or design cooling loads in underfloor air distribution (

  7. BTS Software Tools for Energy Efficient Buildings

    SciTech Connect (OSTI)

    Brandegee

    1999-03-06T23:59:59.000Z

    A summary of the software available to building industry professionals on the Internet Web site www.eren.doe.gov/buildings/tools{_}directory.

  8. Ootw Tool Requirements in Relation to JWARS

    SciTech Connect (OSTI)

    Hartley III, D.S.; Packard, S.L.

    1998-01-01T23:59:59.000Z

    This document reports the results of the CMke of the Secretary of Defense/Program Analysis & Evaluation (OSD/PA&E) sponsored project to identify how Operations Other Than War (OOTW) tool requirements relate to the Joint Warfare Simulation (JWARS) and, more generally, to joint analytical modeling and simulation (M&S) requirements. It includes recommendations about which OOTW tools (and functionality within tools) should be included in JWARS, which should be managed as joint analytical modeling and simulation (M&S) tools, and which should be left for independent development.

  9. Circuit reconstruction tools today Stephen J Smith

    E-Print Network [OSTI]

    Born, Richard

    Circuit reconstruction tools today Stephen J Smith To understand how a brain processes information, Stanford University School of Medicine, Stanford, CA 94305, United States Corresponding author: Smith

  10. Precision replenishable grinding tool and manufacturing process

    DOE Patents [OSTI]

    Makowiecki, Daniel M. (Livermore, CA); Kerns, John A. (Livermore, CA); Blaedel, Kenneth L. (Livermore, CA); Colella, Nicholas J. (Livermore, CA); Davis, Pete J. (Pleasanton, CA); Juntz, Robert S. (Hayward, CA)

    1998-01-01T23:59:59.000Z

    A reusable grinding tool consisting of a replaceable single layer of abrasive particles intimately bonded to a precisely configured tool substrate, and a process for manufacturing the grinding tool. The tool substrate may be ceramic or metal and the abrasive particles are preferably diamond, but may be cubic boron nitride. The manufacturing process involves: coating a configured tool substrate with layers of metals, such as titanium, copper and titanium, by physical vapor deposition (PVD); applying the abrasive particles to the coated surface by a slurry technique; and brazing the abrasive particles to the tool substrate by alloying the metal layers. The precision control of the composition and thickness of the metal layers enables the bonding of a single layer or several layers of micron size abrasive particles to the tool surface. By the incorporation of an easily dissolved metal layer in the composition such allows the removal and replacement of the abrasive particles, thereby providing a process for replenishing a precisely machined grinding tool with fine abrasive particles, thus greatly reducing costs as compared to replacing expensive grinding tools.

  11. Precision replenishable grinding tool and manufacturing process

    DOE Patents [OSTI]

    Makowiecki, D.M.; Kerns, J.A.; Blaedel, K.L.; Colella, N.J.; Davis, P.J.; Juntz, R.S.

    1998-06-09T23:59:59.000Z

    A reusable grinding tool consisting of a replaceable single layer of abrasive particles intimately bonded to a precisely configured tool substrate, and a process for manufacturing the grinding tool are disclosed. The tool substrate may be ceramic or metal and the abrasive particles are preferably diamond, but may be cubic boron nitride. The manufacturing process involves: coating a configured tool substrate with layers of metals, such as titanium, copper and titanium, by physical vapor deposition (PVD); applying the abrasive particles to the coated surface by a slurry technique; and brazing the abrasive particles to the tool substrate by alloying the metal layers. The precision control of the composition and thickness of the metal layers enables the bonding of a single layer or several layers of micron size abrasive particles to the tool surface. By the incorporation of an easily dissolved metal layer in the composition such allows the removal and replacement of the abrasive particles, thereby providing a process for replenishing a precisely machined grinding tool with fine abrasive particles, thus greatly reducing costs as compared to replacing expensive grinding tools. 11 figs.

  12. Natural System Evaluation and Tool Development: International...

    Broader source: Energy.gov (indexed) [DOE]

    collaboration on the natural system evaluation and tool development included: (1) data interpretation of colloid-facilitated transport experiments at Grimsel Test Site, (2)...

  13. Geographic Information Systems- Tools For Geotherm Exploration...

    Open Energy Info (EERE)

    Systems- Tools For Geotherm Exploration, Tracers Data Analysis, And Enhanced Data Distribution, Visualization, And Management Jump to: navigation, search OpenEI Reference...

  14. Graduate Kentucky Metropolitan Rate Application

    E-Print Network [OSTI]

    Franco, John

    Graduate Kentucky Metropolitan Rate Application REGISTRAR'S OFFICE University of Cincinnati PO Box Kentucky counties are able to attend UC at an established metropolitan tuition rate. Non Kentucky residency, these students are not eligible for the graduate metropolitan rate. Kentucky counties

  15. Decision Support Tool for Predicting Aircraft Arrival Rates, Ground Delay Programs, and Airport

    E-Print Network [OSTI]

    associated with construction, it is unlikely that any new airports will be built in the near future went on to predict that the these airports will be at 89% capacity by 2012 [2]. The congestion problem

  16. Financial Assessment

    E-Print Network [OSTI]

    Cy Chan; Pamela Silva; Chao Zhang

    2011-01-01T23:59:59.000Z

    We would like to thank everyone who helped us with this report, including but not limited to: John Bolduc, Steve Lenkauskas, George Fernandes, and the staff at the City of Cambridge and Danehy Park who helped shape this report and made on-site instrument installation and data collection possible. Mark Lipson, Jack Clarke and Jean Rogers for their guidance with the environmental and community impact assessment. Bob Paine and Scott Abbett for their thoughts and experiences with the Medford McGlynn School wind turbine. This preliminary assessment report investigates the wind resource available at Danehy Park in the City of Cambridge, providing estimated power generation figures as well as cost and revenue estimates and

  17. Quantitative Risk reduction estimation Tool For Control Systems, Suggested Approach and Research Needs

    SciTech Connect (OSTI)

    Miles McQueen; Wayne Boyer; Mark Flynn; Sam Alessi

    2006-03-01T23:59:59.000Z

    For the past year we have applied a variety of risk assessment technologies to evaluate the risk to critical infrastructure from cyber attacks on control systems. More recently, we identified the need for a stand alone control system risk reduction estimation tool to provide owners and operators of control systems with a more useable, reliable, and credible method for managing the risks from cyber attack. Risk is defined as the probability of a successful attack times the value of the resulting loss, typically measured in lives and dollars. Qualitative and ad hoc techniques for measuring risk do not provide sufficient support for cost benefit analyses associated with cyber security mitigation actions. To address the need for better quantitative risk reduction models we surveyed previous quantitative risk assessment research; evaluated currently available tools; developed new quantitative techniques [17] [18]; implemented a prototype analysis tool to demonstrate how such a tool might be used; used the prototype to test a variety of underlying risk calculational engines (e.g. attack tree, attack graph); and identified technical and research needs. We concluded that significant gaps still exist and difficult research problems remain for quantitatively assessing the risk to control system components and networks, but that a useable quantitative risk reduction estimation tool is not beyond reach.

  18. Building America Webinar: BEopt Optimization Tool and National...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BEopt Optimization Tool and National Residential Efficiency Measures Database Building America Webinar: BEopt Optimization Tool and National Residential Efficiency Measures...

  19. www.sensor-ip.org Sustainability Impact Assessment

    E-Print Network [OSTI]

    www.sensor-ip.org May 2005 Sustainability Impact Assessment: Tools for Environmental, Social countries constitute the consortium, which develops science based ex-ante Sustainability Impact Assessment regions. SENSOR directly responds to the European sustainability objectives as applied to land use

  20. Energy Signal Tool for Decision Support in Building Energy Systems

    SciTech Connect (OSTI)

    Henze, G. P.; Pavlak, G. S.; Florita, A. R.; Dodier, R. H.; Hirsch, A. I.

    2014-12-01T23:59:59.000Z

    A prototype energy signal tool is demonstrated for operational whole-building and system-level energy use evaluation. The purpose of the tool is to give a summary of building energy use which allows a building operator to quickly distinguish normal and abnormal energy use. Toward that end, energy use status is displayed as a traffic light, which is a visual metaphor for energy use that is either substantially different from expected (red and yellow lights) or approximately the same as expected (green light). Which light to display for a given energy end use is determined by comparing expected to actual energy use. As expected, energy use is necessarily uncertain; we cannot choose the appropriate light with certainty. Instead, the energy signal tool chooses the light by minimizing the expected cost of displaying the wrong light. The expected energy use is represented by a probability distribution. Energy use is modeled by a low-order lumped parameter model. Uncertainty in energy use is quantified by a Monte Carlo exploration of the influence of model parameters on energy use. Distributions over model parameters are updated over time via Bayes' theorem. The simulation study was devised to assess whole-building energy signal accuracy in the presence of uncertainty and faults at the submetered level, which may lead to tradeoffs at the whole-building level that are not detectable without submetering.

  1. A Automated Tool for Supporting FMEAs of Digital Systems

    SciTech Connect (OSTI)

    Yue,M.; Chu, T.-L.; Martinez-Guridi, G.; Lehner, J.

    2008-09-07T23:59:59.000Z

    Although designs of digital systems can be very different from each other, they typically use many of the same types of generic digital components. Determining the impacts of the failure modes of these generic components on a digital system can be used to support development of a reliability model of the system. A novel approach was proposed for such a purpose by decomposing the system into a level of the generic digital components and propagating failure modes to the system level, which generally is time-consuming and difficult to implement. To overcome the associated issues of implementing the proposed FMEA approach, an automated tool for a digital feedwater control system (DFWCS) has been developed in this study. The automated FMEA tool is in nature a simulation platform developed by using or recreating the original source code of the different module software interfaced by input and output variables that represent physical signals exchanged between modules, the system, and the controlled process. For any given failure mode, its impacts on associated signals are determined first and the variables that correspond to these signals are modified accordingly by the simulation. Criteria are also developed, as part of the simulation platform, to determine whether the system has lost its automatic control function, which is defined as a system failure in this study. The conceptual development of the automated FMEA support tool can be generalized and applied to support FMEAs for reliability assessment of complex digital systems.

  2. Rates and Repayment Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1PrincipalRare Iron Oxide in AncientRates and

  3. Rates and Repayment Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1PrincipalRare Iron Oxide in AncientRates

  4. Rating Agency Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor.Tariff Rates FY 2015

  5. BCP Annual Rate Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScience Program CumulusA t i o nLiquids Reserve2015 BCP Annual Rate

  6. The Steam System Scoping Tool: Benchmarking Your Steam Operations Through Best Practices

    E-Print Network [OSTI]

    Wright, A.; Hahn, G.

    system efficiency. The BestPractices Steam effort, a part of the DOE-OIT effort, has developed a new tool that steam energy managers and operations personnel can use to assess their steam operations and improve their steam energy usage -the Steam System...

  7. Energy flux as a tool in locating tsunami secondary Kowalik Zygmunt

    E-Print Network [OSTI]

    Kowalik, Zygmunt

    Energy flux as a tool in locating tsunami secondary sources Kowalik Zygmunt Institute Marine waves. Using these tsunami events we demonstrate that sudden changes caused by higher energy pulses in the intermittent tsunami wave trains can be assessed by energy fluxes. Therefore, to delineate the regions

  8. Development of an ArcGIS-pollutant load application (PLOAD) tool

    E-Print Network [OSTI]

    Young, De'Etra Jenra

    2009-06-02T23:59:59.000Z

    was to adapt an automated tool for assessing the Pollutant Load Application (PLOAD). Created by CH2M HILL, a fullservice engineering and construction enterprise, PLOAD is a simplified GIS-based model used to calculate pollutants within a watershed. The so...

  9. METHOD AND TOOLS TO MEET ENERGY EFFICIENCY TARGETS AT PRODUCT DESIGN STAGE

    E-Print Network [OSTI]

    Paris-Sud XI, Universit茅 de

    are energy indicator, guidelines and an environmental checking loop. The following paper is focused its design. 路 Guidelines tool: provides guidelines to fill the gap between energy consumption assessed is an instantaneous value, easy to measure with simple protocols. Taking into account the time dimension needs more

  10. Rapid Risk Assessment: FY05 Annual Summary Report

    SciTech Connect (OSTI)

    Whelan, Gene; Millard, W. David; Gelston, Gariann M.; Pelton, Mitch A.; Yang, Zhaoqing; Strenge, Dennis L.; Lee, Cheegwan; Sivaraman, Chitra; Simpson, Mary J.; Young, Joan K.; Khangaonkar, Tarang P.; Downing, Timothy R.; Hoopes, Bonnie L.; Hachmeister, Lon E.

    2006-03-06T23:59:59.000Z

    The Pacific Northwest National Laboratory (PNNL) is developing decision support tools that will assist in the transition of incident information into Protective Action Recommendations (PARs) that are understandable and can be executed in a real-world, operational environment. During emergencies, responders must rapidly assess risks and decide on the best course of action梐ll within minutes to hours. PNNL is blending existing modeling and decision support technology to develop new methods for transitioning science-based threat assessment to PARs. The rapid risk assessment tool will be both understandable and applicable to the emergency management community and would be a valuable tool during any water security-related incident. In 2005, PNNL demonstrated the integration of the multi-thematic modeling with emergency management decision support tools to create a Rapid Risk Assessment (RRA) tool that will transition risk to PARs that assist in responding to or mitigating the direct and indirect impacts of the incident(s). The RRA tool does this by aligning multi-thematic modeling capabilities with real-world response zones established by emergency and site operations managers. The RRA tool uses the risk assessment tool to drive prognostic models that use the type of incident, time of impact, severity of impact, and duration of impact to select the most appropriate PAR. Because PARs (and the thresholds by which they are selected) are jointly established by the technologists and the emergency management and operations decision makers, the science-based risk assessment can transition into a recommendation that can be understood and executed by people in the field.

  11. Tool to Prioritize Energy Efficiency Investments

    SciTech Connect (OSTI)

    Farese, P.; Gelman, R.; Hendron, R.

    2012-08-01T23:59:59.000Z

    To provide analytic support of the U.S. Department of Energy's Office of the Building Technology Program (BTP), NREL developed a Microsoft Excel-based tool to provide an open and objective comparison of the hundreds of investment opportunities available to BTP. This tool uses established methodologies to evaluate the energy savings and cost of those savings.

  12. Ceramic-bonded abrasive grinding tools

    DOE Patents [OSTI]

    Holcombe, Jr., Cressie E. (Farragut, TN); Gorin, Andrew H. (Knoxville, TN); Seals, Roland D. (Oak Ridge, TN)

    1994-01-01T23:59:59.000Z

    Abrasive grains such as boron carbide, silicon carbide, alumina, diamond, cubic boron nitride, and mullite are combined with a cement primarily comprised of zinc oxide and a reactive liquid setting agent and solidified into abrasive grinding tools. Such grinding tools are particularly suitable for grinding and polishing stone, such as marble and granite.

  13. Ceramic-bonded abrasive grinding tools

    DOE Patents [OSTI]

    Holcombe, C.E. Jr.; Gorin, A.H.; Seals, R.D.

    1994-11-22T23:59:59.000Z

    Abrasive grains such as boron carbide, silicon carbide, alumina, diamond, cubic boron nitride, and mullite are combined with a cement primarily comprised of zinc oxide and a reactive liquid setting agent and solidified into abrasive grinding tools. Such grinding tools are particularly suitable for grinding and polishing stone, such as marble and granite.

  14. NISTIR 7387 Cell Phone Forensic Tools

    E-Print Network [OSTI]

    NISTIR 7387 Cell Phone Forensic Tools: AnOverviewandAnalysisUpdate RickAyers WayneJansen LudovicMoenner AurelienDelaitre #12;iii NISTIR 7387 Cell Phone Forensic Tools: An Overview and Analysis available for the purpose. iii #12;Abstract Cell phones and other handheld devices incorporating cell phone

  15. NISTIR 7250 Cell Phone Forensic Tools

    E-Print Network [OSTI]

    NISTIR 7250 Cell Phone Forensic Tools: AnOverviewandAnalysis RickAyers WayneJansen NicolasCilleros RonanDaniellou #12;iii NISTIR 7250 Cell Phone Forensic Tools: An Overview and Analysis Rick Ayers Wayne Interagency Report 187 pages (2005) iii #12;Abstract Cell phones and other handheld devices incorporating cell

  16. Screening and Evaluation Tool (SET) Users Guide

    SciTech Connect (OSTI)

    Layne Pincock

    2014-10-01T23:59:59.000Z

    This document is the users guide to using the Screening and Evaluation Tool (SET). SET is a tool for comparing multiple fuel cycle options against a common set of criteria and metrics. It does this using standard multi-attribute utility decision analysis methods.

  17. Chip breaking system for automated machine tool

    DOE Patents [OSTI]

    Arehart, Theodore A. (Clinton, TN); Carey, Donald O. (Oak Ridge, TN)

    1987-01-01T23:59:59.000Z

    The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

  18. Methodology for Assessing Greenhouse Gas Emissions and Assessing Mitigation Options for On-Road Mobile Sources Project for the Houston-Galveston Area Council

    E-Print Network [OSTI]

    Methodology for Assessing Greenhouse Gas Emissions and Assessing Mitigation Options for On reductions in GHG, and b) use analytical tools/methods to assess the emissions reductions possible through and prioritized based on factors such as cost effectiveness, potential for emission reductions, and applicability

  19. User Guide for the STAYSL PNNL Suite of Software Tools

    SciTech Connect (OSTI)

    Greenwood, Lawrence R.; Johnson, Christian D.

    2013-02-27T23:59:59.000Z

    The STAYSL PNNL software suite provides a set of tools for working with neutron activation rates measured in a nuclear fission reactor, an accelerator-based neutron source, or any neutron field to determine the neutron flux spectrum through a generalized least-squares approach. This process is referred to as neutron spectral adjustment since the preferred approach is to use measured data to adjust neutron spectra provided by neutron physics calculations. The input data consist of the reaction rates based on measured activities, an initial estimate of the neutron flux spectrum, neutron activation cross sections and their associated uncertainties (covariances), and relevant correction factors. The output consists of the adjusted neutron flux spectrum and associated covariance matrix, which is useful for neutron dosimetry and radiation damage calculations.

  20. 1600.1 Staff Performance Management Tool Purpose The Performance Management Tool is a comprehensive document

    E-Print Network [OSTI]

    Linhardt, Robert J.

    for the position. Definitions The Performance Management Tool (PMT) is a comprehensive document representing1600 - 1 March 2014 1600.1 Staff Performance Management Tool Purpose The Performance Management Tool is a comprehensive document designed to systematically improve the knowledge, skills and abilities

  1. Energy Management Through Innovative Rates

    E-Print Network [OSTI]

    Williams, M. L.

    1982-01-01T23:59:59.000Z

    of energy efficiency in the industrial sector and specific rate design alternatives for doing so....

  2. RISK REDUCTION WITH A FUZZY EXPERT EXPLORATION TOOL

    SciTech Connect (OSTI)

    Robert Balch

    2003-10-15T23:59:59.000Z

    Incomplete or sparse information on types of data such as geologic or formation characteristics introduces a high level of risk for oil exploration and development projects. ''Expert'' systems developed and used in several disciplines and industries have demonstrated beneficial results. A state-of-the-art exploration ''expert'' tool, relying on a computerized database and computer maps generated by neural networks, is being developed through the use of ''fuzzy'' logic, a relatively new mathematical treatment of imprecise or non-explicit parameters and values. Oil prospecting risk can be reduced with the use of a properly developed and validated ''Fuzzy Expert Exploration (FEE) Tool.'' This FEE Tool can be beneficial in many regions of the U.S. by enabling risk reduction in oil and gas prospecting as well as decreased prospecting and development costs. In the 1998-1999 oil industry environment, many smaller exploration companies lacked the resources of a pool of expert exploration personnel. Downsizing, low oil prices, and scarcity of exploration funds have also affected larger companies, and will, with time, affect the end users of oil industry products in the U.S. as reserves are depleted. The FEE Tool will benefit a diverse group in the U.S., leading to a more efficient use of scarce funds, and possibly decreasing dependence on foreign oil and lower product prices for consumers. This ninth of ten semi-annual reports contains a summary of progress to date, problems encountered, plans for the next year, and an assessment of the prospects for future progress. The emphasis during the March 2003 through September 2003 period was directed toward Silurian-Devonian geology, development of rules for the fuzzy system, and on-line software.

  3. RISK REDUCTION WITH A FUZZY EXPERT EXPLORATION TOOL

    SciTech Connect (OSTI)

    Robert Balch

    2003-04-15T23:59:59.000Z

    Incomplete or sparse information on types of data such as geologic or formation characteristics introduces a high level of risk for oil exploration and development projects. ''Expert'' systems developed and used in several disciplines and industries have demonstrated beneficial results. A state-of-the-art exploration ''expert'' tool, relying on a computerized database and computer maps generated by neural networks, is being developed through the use of ''fuzzy'' logic, a relatively new mathematical treatment of imprecise or non-explicit parameters and values. Oil prospecting risk can be reduced with the use of a properly developed and validated ''Fuzzy Expert Exploration (FEE) Tool.'' This FEE Tool can be beneficial in many regions of the U.S. by enabling risk reduction in oil and gas prospecting as well as decreased prospecting and development costs. In the 1998-1999 oil industry environment, many smaller exploration companies lacked the resources of a pool of expert exploration personnel. Downsizing, low oil prices, and scarcity of exploration funds have also affected larger companies, and will, with time, affect the end users of oil industry products in the U.S. as reserves are depleted. The pool of experts is much reduced today. The FEE Tool will benefit a diverse group in the U.S., leading to a more efficient use of scarce funds, and possibly decreasing dependence on foreign oil and lower product prices for consumers. This fourth of five annual reports contains a summary of progress to date, problems encountered, plans for the next year, and an assessment of the prospects for future progress. The emphasis during the April 2002 through March 2003 period was directed toward Silurian-Devonian geology, development of rules for the fuzzy system, and on-line software.

  4. An internet tool for designing energy efficient homes

    SciTech Connect (OSTI)

    Milne, M.; Gomez, C.; Leeper, D.; Zurick, J.; Nindra, A.; Shen, J.; Kobayashi, Y.

    1999-07-01T23:59:59.000Z

    To help their 4.5 million residential customers make energy efficient decisions, Southern California Gas asked UCLA to develop an Internet-based simulation tool called Project REED (Residential Energy Efficient Design). The critical problem is to give these ratepayers an easy way to visualize the relative effectiveness of their various options. REED is a internet-based tool that calculates the annual gas and electricity cost for each separate building design or operating decision. Hourly climate data for the Typical Meteorological Year (TMY2) in all the climate zones in the SoCalGas service area are built in, as well as utility rates for each type of residential service. REED's Expert System first designs a basic Code Compliant home, then designs a more Energy Efficient design based on local climate, and it shows how much money ratepayers would save. The simulation engine inside REED is SOLAR-5, one of the nation's most widely used whole building energy design tools. SOLAR-5 has been validated against DOE-2 using the BESTEST procedure. This paper, one of a pair describing REED, explains the project from the user's point of view and describes what was learned from the Ratepayer Usability Test. The second paper explains the project from the simulation and software engineering point of view.

  5. Importance of life cycle assessment

    SciTech Connect (OSTI)

    Bridges, J.S.

    1994-06-16T23:59:59.000Z

    The paper presents Life Cycle Assessment (LCA) as a tool to assist the waste professional with integrated waste management. LCA can be the connection between the waste professional and designer/producer to permit the waste professional to encourage the design of products so material recovery is most efficient and markets can be better predicted. The waste professional can better monitor the involvement of the consumer in waste management by using LCA and looking upstream at how the consumer actually reacts to products and packaging. LCA can also help the waste professional better understand the waste stream.

  6. INEEL Source Water Assessment

    SciTech Connect (OSTI)

    Sehlke, Gerald

    2003-03-01T23:59:59.000Z

    The Idaho National Engineering and Environmental Laboratory (INEEL) covers approximately 890 mi2 and includes 12 public water systems that must be evaluated for Source water protection purposes under the Safe Drinking Water Act. Because of its size and location, six watersheds and five aquifers could potentially affect the INEEL抯 drinking water sources. Based on a preliminary evaluation of the available information, it was determined that the Big Lost River, Birch Creek, and Little Lost River Watersheds and the eastern Snake River Plain Aquifer needed to be assessed. These watersheds were delineated using the United States Geologic Survey抯 Hydrological Unit scheme. Well capture zones were originally estimated using the RESSQC module of the Environmental Protection Agency抯 Well Head Protection Area model, and the initial modeling assumptions and results were checked by running several scenarios using Modflow modeling. After a technical review, the resulting capture zones were expanded to account for the uncertainties associated with changing groundwater flow directions, a thick vadose zone, and other data uncertainties. Finally, all well capture zones at a given facility were merged to a single wellhead protection area at each facility. A contaminant source inventory was conducted, and the results were integrated with the well capture zones, watershed and aquifer information, and facility information using geographic information system technology to complete the INEEL抯 Source Water Assessment. Of the INEEL抯 12 public water systems, three systems rated as low susceptibility (EBR-I, Main Gate, and Gun Range), and the remainder rated as moderate susceptibility. No INEEL public water system rated as high susceptibility. We are using this information to develop a source water management plan from which we will subsequently implement an INEEL-wide source water management program. The results are a very robust set of wellhead protection areas that will protect the INEEL抯 public water systems yet not too conservative to inhibit the INEEL from carrying out its missions.

  7. Nuclear Nonproliferation Ontology Assessment Team Final Report

    SciTech Connect (OSTI)

    Strasburg, Jana D.; Hohimer, Ryan E.

    2012-01-01T23:59:59.000Z

    Final Report for the NA22 Simulations, Algorithm and Modeling (SAM) Ontology Assessment Team's efforts from FY09-FY11. The Ontology Assessment Team began in May 2009 and concluded in September 2011. During this two-year time frame, the Ontology Assessment team had two objectives: (1) Assessing the utility of knowledge representation and semantic technologies for addressing nuclear nonproliferation challenges; and (2) Developing ontological support tools that would provide a framework for integrating across the Simulation, Algorithm and Modeling (SAM) program. The SAM Program was going through a large assessment and strategic planning effort during this time and as a result, the relative importance of these two objectives changed, altering the focus of the Ontology Assessment Team. In the end, the team conducted an assessment of the state of art, created an annotated bibliography, and developed a series of ontological support tools, demonstrations and presentations. A total of more than 35 individuals from 12 different research institutions participated in the Ontology Assessment Team. These included subject matter experts in several nuclear nonproliferation-related domains as well as experts in semantic technologies. Despite the diverse backgrounds and perspectives, the Ontology Assessment team functioned very well together and aspects could serve as a model for future inter-laboratory collaborations and working groups. While the team encountered several challenges and learned many lessons along the way, the Ontology Assessment effort was ultimately a success that led to several multi-lab research projects and opened up a new area of scientific exploration within the Office of Nuclear Nonproliferation and Verification.

  8. Salt site performance assessment activities

    SciTech Connect (OSTI)

    Kircher, J.F.; Gupta, S.K.

    1983-01-01T23:59:59.000Z

    During this year the first selection of the tools (codes) for performance assessments of potential salt sites have been tentatively selected and documented; the emphasis has shifted from code development to applications. During this period prior to detailed characterization of a salt site, the focus is on bounding calculations, sensitivity and with the data available. The development and application of improved methods for sensitivity and uncertainty analysis is a focus for the coming years activities and the subject of a following paper in these proceedings. Although the assessments to date are preliminary and based on admittedly scant data, the results indicate that suitable salt sites can be identified and repository subsystems designed which will meet the established criteria for protecting the health and safety of the public. 36 references, 5 figures, 2 tables.

  9. Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

    SciTech Connect (OSTI)

    Yeh, B.

    2011-03-01T23:59:59.000Z

    This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

  10. Overcoming Scalability Challenges for Tool Daemon Launching

    SciTech Connect (OSTI)

    Ahn, D H; Arnold, D C; de Supinski, B R; Lee, G L; Miller, B P; Schulz, M

    2008-02-15T23:59:59.000Z

    Many tools that target parallel and distributed environments must co-locate a set of daemons with the distributed processes of the target application. However, efficient and portable deployment of these daemons on large scale systems is an unsolved problem. We overcome this gap with LaunchMON, a scalable, robust, portable, secure, and general purpose infrastructure for launching tool daemons. Its API allows tool builders to identify all processes of a target job, launch daemons on the relevant nodes and control daemon interaction. Our results show that Launch-MON scales to very large daemon counts and substantially enhances performance over existing ad hoc mechanisms.

  11. Flibe assessments.

    SciTech Connect (OSTI)

    Sze, D. K.; McCarthy, K.; Sawan, M.; Tillack, M.; Ying, A.; Zinkle, S.

    2000-11-15T23:59:59.000Z

    An assessment of the issues on using flibe for fusion applications has been made. It is concluded that sufficient tritium breeding can be achieved for a flibe blanket, especially if a few cm of Be is include in the blanket design. A key issue is the control of the transmutation products such as TF and F{sub 2}. A REDOX (Reducing-Oxidation) reaction has to be demonstrated which is compatible to the blanket design. Also, MHD may have strong impact on heat transfer if the flow is perpendicular to the magnetic field. The issues associated with the REDOX reaction and the MHD issues have to be resolved by both experimental program and numerical solutions.

  12. Hardgrove grindability index and petrology used as an enhanced predictor of coal feed rate

    SciTech Connect (OSTI)

    Hower, J.C. (Univ. of Kentucky, KY (US))

    1990-01-01T23:59:59.000Z

    An improved predictor of coal pulverization behavior and coal feed rate is under development at the CAER based upon the interaction between Hardgrove Grindability Index (HGI) and coal petrology. With educated attention, this interaction may be a useful tool to enhance coal feed rates if cautiously extended to the mining environment where blends of coal lithotypes are produced.

  13. A NOVEL MATHEMATICAL TOOL FOR CHARACTERIZING PETROLEUM FLUID RHEOLOGY WITHIN POROUS MEDIA

    E-Print Network [OSTI]

    Hossain, M. Enamul

    or gas entries in the vicinity of a petroleum well. The same profile can also be used to determine1 A NOVEL MATHEMATICAL TOOL FOR CHARACTERIZING PETROLEUM FLUID RHEOLOGY WITHIN POROUS MEDIA M and pressure distribution in a petroleum reservoir during thermal operations. The rate equation

  14. Assessor Training Assessment Techniques

    E-Print Network [OSTI]

    NVLAP Assessor Training Assessment Techniques: Communication Skills and Conducting an Assessment listener 路Knowledgeable Assessor Training 2009: Assessment Techniques: Communication Skills & Conducting, truthful, sincere, discrete 路 Diplomatic 路 Decisive 路 Selfreliant Assessor Training 2009: Assessment

  15. National Utility Rate Database: Preprint

    SciTech Connect (OSTI)

    Ong, S.; McKeel, R.

    2012-08-01T23:59:59.000Z

    When modeling solar energy technologies and other distributed energy systems, using high-quality expansive electricity rates is essential. The National Renewable Energy Laboratory (NREL) developed a utility rate platform for entering, storing, updating, and accessing a large collection of utility rates from around the United States. This utility rate platform lives on the Open Energy Information (OpenEI) website, OpenEI.org, allowing the data to be programmatically accessed from a web browser, using an application programming interface (API). The semantic-based utility rate platform currently has record of 1,885 utility rates and covers over 85% of the electricity consumption in the United States.

  16. 15th International Conference Ramiran, May 3-6, 2013, Versailles Assessing fertilising practices with organic residues in agriculture: a life

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Cycle Assessment. Life Cycle Assessment (LCA) is a common tool to assess environmental impacts with organic residues in agriculture: a life cycle assessment perspective Pradel Marilys1* (1) Irstea, UR TSCF of a product or a system. The process or product life cycle is assessed from raw material acquisition through

  17. Assessment 101: The Assessment Cycle, Clear and

    E-Print Network [OSTI]

    Su, Xiao

    Assessment 101: The Assessment Cycle, Clear and Simple October 1, 2014 Kellogg West Conference Center, Pomona, CA Resource Binder #12;2014-2015 WASC Senior College and University Commission is pleased expectations. Assessment 101: The Assessment Cycle, Clear and Simple October 1, 2014. Kellogg West, Pomona, CA

  18. Hard turning micro-machine tool

    DOE Patents [OSTI]

    DeVor, Richard E; Adair, Kurt; Kapoor, Shiv G

    2013-10-22T23:59:59.000Z

    A micro-scale apparatus for supporting a tool for hard turning comprises a base, a pivot coupled to the base, an actuator coupled to the base, and at least one member coupled to the actuator at one end and rotatably coupled to the pivot at another end. A tool mount is disposed on the at least one member. The at least one member defines a first lever arm between the pivot and the tool mount, and a second lever arm between the pivot and the actuator. The first lever arm has a length that is less than a length of the second lever arm. The actuator moves the tool mount along an arc.

  19. Electrical Usage Characterization of Semiconductor Processing Tools

    E-Print Network [OSTI]

    Hinson, S. R.

    This paper presents the basic concepts in performing an energy and power audit of a semiconductor process tool. A protocol exists that fully describes these measurements and their use and applicability and it will be described. This protocol...

  20. Commercial Building Energy Asset Scoring Tool

    Broader source: Energy.gov [DOE]

    This Asset Scoring Tool will guide your data collection, store your building information, and generate Asset Scores and system evaluations for your building envelope and building systems. The Asset...

  1. Clean Cities Web Sites and Web Tools

    Broader source: Energy.gov (indexed) [DOE]

    Clean Cities Web Sites and Web Tools Johanna Levene July 28, 2010 Innovation for Our Energy Future Fuel Economy fueleconomy.gov What vehicle? Clean Cities Web Site * Information...

  2. Computational Tools to Accelerate Commercial Development

    SciTech Connect (OSTI)

    Miller, David C.

    2013-01-01T23:59:59.000Z

    The goals of the work reported are: to develop new computational tools and models to enable industry to more rapidly develop and deploy new advanced energy technologies; to demonstrate the capabilities of the CCSI Toolset on non-proprietary case studies; and to deploy the CCSI Toolset to industry. Challenges of simulating carbon capture (and other) processes include: dealing with multiple scales (particle, device, and whole process scales); integration across scales; verification, validation, and uncertainty; and decision support. The tools cover: risk analysis and decision making; validated, high-fidelity CFD; high-resolution filtered sub-models; process design and optimization tools; advanced process control and dynamics; process models; basic data sub-models; and cross-cutting integration tools.

  3. Documenting stone age cleverness by tool development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    indistinguishable from similar tools recently found west of Lake Turkana in northern Kenya, more than 125 miles to the south. "To me, the most intriguing story of the discovery...

  4. DEVELOPMENT OF A SOFTWARE DESIGN TOOL FOR

    Broader source: Energy.gov [DOE]

    This project focuses on the development of a stand-alone software tool for the design and economic analysis of hybrid geothermal heat pump systems for heating-and cooling dominated buildings using solar collectors in both operating modes.

  5. FIELD-DEPLOYABLE SAMPLING TOOLS FOR SPENT NUCLEAR FUEL INTERROGATION IN LIQUID STORAGE

    SciTech Connect (OSTI)

    Berry, T.; Milliken, C.; Martinez-Rodriguez, M.; Hathcock, D.; Heitkamp, M.

    2012-09-12T23:59:59.000Z

    Methodology and field deployable tools (test kits) to analyze the chemical and microbiological condition of aqueous spent fuel storage basins and determine the oxide thickness on the spent fuel basin materials were developed to assess the corrosion potential of a basin. this assessment can then be used to determine the amount of time fuel has spent in a storage basin to ascertain if the operation of the reactor and storage basin is consistent with safeguard declarations or expectations and assist in evaluating general storage basin operations. The test kit was developed based on the identification of key physical, chemical and microbiological parameters identified using a review of the scientific and basin operations literature. The parameters were used to design bench scale test cells for additional corrosion analyses, and then tools were purchased to analyze the key parameters. The tools were used to characterize an active spent fuel basin, the Savannah River Site (SRS) L-Area basin. The sampling kit consisted of a total organic carbon analyzer, an YSI multiprobe, and a thickness probe. The tools were field tested to determine their ease of use, reliability, and determine the quality of data that each tool could provide. Characterization confirmed that the L Area basin is a well operated facility with low corrosion potential.

  6. Interwell Connectivity and Diagnosis Using Correlation of Production and Injection Rate Data in Hydrocarbon Production

    SciTech Connect (OSTI)

    Jerry L. Jensen; Larry W. Lake; Ali Al-Yousef; Dan Weber; Ximing Liang; T.F. Edgar; Nazli Demiroren; Danial Kaviani

    2007-03-31T23:59:59.000Z

    This report details progress and results on inferring interwell communication from well rate fluctuations. Starting with the procedure of Albertoni and Lake (2003) as a foundation, the goal of the project was to develop further procedures to infer reservoir properties through weights derived from correlations between injection and production rates. A modified method, described in Yousef and others (2006a,b), and herein referred to as the 'capacitance model', is the primary product of this research project. The capacitance model (CM) produces two quantities, {lambda} and {tau}, for each injector-producer well pair. For the CM, we have focused on the following items: (1) Methods to estimate {lambda} and {tau} from simulated and field well rates. The original method uses both non-linear and linear regression and lacks the ability to include constraints on {lambda} and {tau}. The revised method uses only non-linear regression, permitting constraints to be included as well as accelerating the solution so that problems with large numbers of wells are more tractable. (2) Approaches to integrate {lambda} and {tau} to improve connectivity evaluations. Interpretations have been developed using Lorenz-style and log-log plots to assess heterogeneity. Testing shows the interpretations can identify whether interwell connectivity is controlled by flow through fractures, high-permeability layers, or due to partial completion of wells. Applications to the South Wasson and North Buck Draw Fields show promising results. (3) Optimization of waterflood injection rates using the CM and a power law relationship for watercut to maximize economic return. Tests using simulated data and a range of oil prices show the approach is working. (4) Investigation of methods to increase the robustness of {lambda} and {tau} estimates. Human interventions, such as workovers, also cause rate fluctuations and can be misinterpreted by the model if bottom hole pressure data are not available. A revised method, called the 'segmented capacitance model', identifies times when production changes might not be caused strictly by water injection changes. Application to data from Monument Butte Field shows encouraging results. Our results show the CM and its modified forms can be an important tool for waterflood management. We have moved beyond the proof of principle stage to show it can actually be applied to assess connectivity in field situations. Several shortcomings, however, remain to be addressed before the CM can be routinely applied by field operators. The CM and its modifications analyze well rates in the time domain. We also explored the assessment of interwell connectivity in the spectral domain. We applied conventional methods, based on analyzing passive linear electrical networks, to the analysis of injection and production data. In particular, we assessed the effects of near-wellbore gas on the apparent connectivity. With only oil and water in the system, the results were as expected, giving good connectivity estimates. In the presence of gas, however, the methods could not produce useful estimates of connectivity.

  7. LEDSGP/data-tools | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 ThrottledInformation KumasiToolsLEDSGP/assistance <data-tools <

  8. Vision of a Visualization Tool for Commissioning

    E-Print Network [OSTI]

    Isakson, P.; Eriksson, J.

    2004-01-01T23:59:59.000Z

    VISION OF A VISUALIZATION TOOL FOR COMMISSIONING Per Isakson*, J?rgen Eriksson** * Building Sciences KTH, Stockholm SWEDEN. per.isakson@byv.kth.se ** ?F-Installation, G?teborg, SWEDEN. jorgen.eriksson@af.se Summary. A prototype... of BEMS to support performance monitoring, nor considerable efforts to develop such use. In Sweden the control manufactures do not see a demand from the marketplace; on the contrary they observe little use of the tools they already provide. Research...

  9. TOOL KIT CHECKLIST 12DOM_MI058

    E-Print Network [OSTI]

    Peters, Richard

    TOOL KIT CHECKLIST 12DOM_MI058 TOOLS fOr DIY Considerthetypesofprojectsyouwillbeundertaking,secondhandisfineifthey'reingoodcondition. Anycuttingsurfacesmustberazorsharpandbespecifictothematerialtobecut. Tools--especiallypowertools--canbeverydangerous. "Reality,wastingmoneyandlettingfrustrationandfailuremakeyourprojectsunpleasant (andunsuccessful)andworsestill,putyouoffanymoreDIY. #12;TOOL KIT CHECKLIST 12DOM_MI058 BASIC TOOL KITS MAY INCLUDE

  10. Electromagnetic anti-jam telemetry tool

    DOE Patents [OSTI]

    Ganesan, Harini (Sugar Land, TX); Mayzenberg, Nataliya (Missouri City, TX)

    2008-02-12T23:59:59.000Z

    A mud-pulse telemetry tool includes a tool housing, a motor disposed in the tool housing, and a magnetic coupling coupled to the motor and having an inner shaft and an outer shaft. The tool may also include a stator coupled to the tool housing, a restrictor disposed proximate the stator and coupled to the magnetic coupling, so that the restrictor and the stator adapted to generate selected pulses in a drilling fluid when the restrictor is selectively rotated. The tool may also include a first anti-jam magnet coupled to the too housing, and an second anti-jam magnet disposed proximate the first anti-jam magnet and coupled to the inner shaft and/or the outer shaft, wherein at least one of the first anti-jam magnet and the second anti-jam magnet is an electromagnet, and wherein the first anti-jam magnet and the second anti-jam magnet are positioned with adjacent like poles.

  11. 2007 Wholesale Power Rate Schedules : 2007 General Rate Schedule Provisions.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    2006-11-01T23:59:59.000Z

    This schedule is available for the contract purchase of Firm Power to be used within the Pacific Northwest (PNW). Priority Firm (PF) Power may be purchased by public bodies, cooperatives, and Federal agencies for resale to ultimate consumers, for direct consumption, and for Construction, Test and Start-Up, and Station Service. Rates in this schedule are in effect beginning October 1, 2006, and apply to purchases under requirements Firm Power sales contracts for a three-year period. The Slice Product is only available for public bodies and cooperatives who have signed Slice contracts for the FY 2002-2011 period. Utilities participating in the Residential Exchange Program (REP) under Section 5(c) of the Northwest Power Act may purchase Priority Firm Power pursuant to the Residential Exchange Program. Rates under contracts that contain charges that escalate based on BPA's Priority Firm Power rates shall be based on the three-year rates listed in this rate schedule in addition to applicable transmission charges. This rate schedule supersedes the PF-02 rate schedule, which went into effect October 1, 2001. Sales under the PF-07 rate schedule are subject to BPA's 2007 General Rate Schedule Provisions (2007 GRSPs). Products available under this rate schedule are defined in the 2007 GRSPs. For sales under this rate schedule, bills shall be rendered and payments due pursuant to BPA's 2007 GRSPs and billing process.

  12. The use of an English language assessment test on South African English additional language (EAL) speakers from an indigenous language and cultural background : a critical evaluation.

    E-Print Network [OSTI]

    Mdlalo, Thandeka.

    2015-01-01T23:59:59.000Z

    ??The aim of the study is to provide an in-depth interrogation and critique of the use of language assessment tools on populations from indigenous language (more)

  13. Active Networks as a tool to integrate DGActive Networks as a tool to integrate DG www.econ.no

    E-Print Network [OSTI]

    Page 1 Active Networks as a tool to integrate DGActive Networks as a tool to integrate DG www.econ.no Active networks as a tool toActive networks as a tool to integrate large amounts ofintegrate large GaardestrupGaardestrup, C.,, C., TechwiseTechwise #12;Page 2 Active Networks as a tool to integrate DGActive

  14. RISK REDUCTION WITH A FUZZY EXPERT EXPLORATION TOOL

    SciTech Connect (OSTI)

    William W. Weiss

    2001-05-17T23:59:59.000Z

    Incomplete or sparse information on types of data such as geologic or formation characteristics introduces a high level of risk for oil exploration and development projects. ''Expert'' systems developed and used in several disciplines and industries have demonstrated beneficial results. A state-of-the-art exploration ''expert'' tool, relying on a computerized database and computer maps generated by neural networks, is being developed through the use of ''fuzzy'' logic, a relatively new mathematical treatment of imprecise or non-explicit parameters and values. Oil prospecting risk can be reduced with the use of a properly developed and validated ''Fuzzy Expert Exploration (FEE) Tool.'' This FEE Tool can be beneficial in many regions of the U.S. by enabling risk reduction in oil and gas prospecting as well as decreased prospecting and development costs. In the 1998-1999 oil industry environment, many smaller exploration companies lacked the resources of a pool of expert exploration personnel. Downsizing, low oil prices, and scarcity of exploration funds have also affected larger companies, and will, with time, affect the end users of oil industry products in the U.S. as reserves are depleted. The FEE Tool will benefit a diverse group in the U.S., leading to a more efficient use of scarce funds and lower product prices for consumers. This second annual report contains a summary of progress to date, problems encountered, plans for the next quarter, and an assessment of the prospects for future progress. During the second year of the project, data acquisition of the Brushy Canyon Formation was completed with the compiling and analyzing of well logs, geophysical data, and production information needed to characterize production potential in the Delaware Basin. A majority of this data now resides in several online databases on our servers and is in proper form to be accessed by external programs such as Web applications. A new concept was developed and tested in well log analysis using neural networks. Bulk volume oil (BVO) was successfully predicted using wireline logs as inputs. This concept provides a new tool for estimating the potential success of a well and determining the productive interval to be perforated. Regional attributes have been gridded to a 40-ac bin (gridblock) size, and our fuzzy ranking procedures were applied to determine which attributes are best able to predict production trends in the Delaware Basin. The production indicator was the average of the first 12 full producing months of oil production as the value to be predicted. A study to determine the ability of an artificial intelligence system to predict depth using seismic attributes in a Delaware field was completed and the results were published. Significant improvements over standard techniques were found, particularly when test wells were on the dataset boundary where extrapolation is required. Programming the expert system was undertaken, and a decision tree program was coded in Java Expert System Shell (JESS) that allows development and tabulation of rules and relationships between rules that can be used by our expert system. This important program allows lists of rules to be entered and easily tested and verified. The design of the expert system itself was clarified and an expanded system was created where several distinct factors such as geologic/geophysical data, trap assessment, and formation assessment can be operated on in parallel to increase efficiency of the overall system. Coding of the Java interface, which users can use to access data in the online databases and run the expert system, was completed. Development of the interface ties together the data and the expert system programs coded in JESS while allowing user customization and informative reports of results to be retrieved. Technology transfer continued to be an important aspect of this project. Research and progress to date was presented to a group of industry and academic professionals at the second annual consortium meeting held November 2, 2000 in Hobbs, NM. Key technical res

  15. Life assessment product catalog for boilers, steam pipes, and steam turbines

    SciTech Connect (OSTI)

    Hoffman, S. (Hoffman (S.), Santa Clara, CA (United States))

    1992-07-01T23:59:59.000Z

    Aging fossil power plants, escalating costs of new plant construction, and load growth rate uncertainties are motivating utilities to make the most effective use of critical components in existing power plants. To help meet this need, EPRI has refined existing methods and developed new methods of predicting the remaining life of key fossil plant components with greater accuracy and confidence. This report describes 16 EPRI products (guidelines, computer programs, and other tools) that apply these techniques to boiler tubes, boiler headers, steam lines, and turbine rotors, blades, and casings. Utility personnel, including plant engineers, maintenance supervisor, engineering department staff, plant operating staff, and performance engineers, can use these products to assess remaining component life, as well as to set cost-effective maintenance procedures, inspection schedules, and operating procedures.

  16. PMI: Knowledge Elicitation and De Bono's Thinking Tools

    E-Print Network [OSTI]

    Easterbrook, Steve

    PMI: Knowledge Elicitation and De Bono's Thinking Tools M-M. Portmann & S. M. Easterbrook School's thinking tools, the PMI (plus - minus - interesting) and built a knowledge elicitation tool for use

  17. A Mission-Centric Visualization Tool for Cybersecurity Situation Awareness

    E-Print Network [OSTI]

    California at Santa Barbara, University of

    A Mission-Centric Visualization Tool for Cybersecurity Situation Awareness Nichole Stockman Four tool that provides high- level situation awareness for cybersecurity scenarios. Our visualization tool competition, which was designed to mirror general cybersecurity scenar- ios that would be encountered

  18. Risk assessment in environmental management

    SciTech Connect (OSTI)

    Asante-Duah, D.K.

    1998-07-01T23:59:59.000Z

    This book is a straightforward exposition of US EPA-based procedures for the risk assessment and risk management of contaminated land, interwoven with discussions on some of the key fundamentals on the fate and transport of chemicals in the environment and the toxic action of environmental chemicals. The book is logically structured, commencing with a general overview of the principles of risk assessment and the interface with environmental legislation. There follows an introduction to environmental fate and transport, modeling, toxicology and uncertainty analysis, and a discussion of the elements of a risk assessment (site characterization, exposure analysis, toxic action and risk characterization), intake of a chemical with its environmental concentration and activity-related parameters such as inhalation rate and exposure time. The book concludes with a discussion on the derivation of risk-based action levels and remediation goals.

  19. Clean Cities Tools: Tools to Help You Drive Smarter, Use Less Petroleum, and Reduce Emissions (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-03-01T23:59:59.000Z

    Clean Cities hosts a collection of calculators, interactive maps, and informational tools to assist fleets, fuel providers, and others looking to reduce petroleum consumption in the transportation sector.

  20. Tools to Boost Steam System Efficiency, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01T23:59:59.000Z

    This fact sheet describes how the Industrial Technologies Program steam software tools can help industrial plants identify steam system improvements to save energy and money.

  1. The Inverted Block Rate:The Inverted Block Rate: An Alternative to Flat Rate BillingAn Alternative to Flat Rate Billing

    E-Print Network [OSTI]

    Hughes, Larry

    The Inverted Block Rate:The Inverted Block Rate: An Alternative to Flat Rate BillingAn Alternative;Inverted Block RateInverted Block Rate 22 IntroductionIntroduction 路路 Modern societies rely on electrical collectionMetering and Rate Models facilitate collection #12;Inverted Block RateInverted Block Rate 33 Rate

  2. Needs for Robotic Assessments of Nuclear Disasters

    SciTech Connect (OSTI)

    Victor Walker; Derek Wadsworth

    2012-06-01T23:59:59.000Z

    Following the nuclear disaster at the Fukushima nuclear reactor plant in Japan, the need for systems which can assist in dynamic high-radiation environments such as nuclear incidents has become more apparent. The INL participated in delivering robotic technologies to Japan and has identified key components which are needed for success and obstacles to their deployment. In addition, we are proposing new work and methods to improve assessments and reactions to such events in the future. Robotics needs in disaster situations include phases such as: Assessment, Remediation, and Recovery Our particular interest is in the initial assessment activities. In assessment we need collection of environmental parameters, determination of conditions, and physical sample collection. Each phase would require key tools and efforts to develop. This includes study of necessary sensors and their deployment methods, the effects of radiation on sensors and deployment, and the development of training and execution systems.

  3. A new tool for accelerator system modeling and analysis

    SciTech Connect (OSTI)

    Gillespie, G.H.; Hill, B.W. [G.H. Gillespie Associates, Inc., Del Mar, CA (United States); Jameson, R.A. [Los Alamos National Lab., NM (United States)

    1994-09-01T23:59:59.000Z

    A novel computer code is being developed to generate system level designs of radiofrequency ion accelerators. The goal of the Accelerator System Model (ASM) code is to create a modeling and analysis tool that is easy to use, automates many of the initial design calculations, supports trade studies used in assessing alternate designs and yet is flexible enough to incorporate new technology concepts as they emerge. Hardware engineering parameters and beam dynamics are modeled at comparable levels of fidelity. Existing scaling models of accelerator subsystems were sued to produce a prototype of ASM (version 1.0) working within the Shell for Particle Accelerator Related Codes (SPARC) graphical user interface. A small user group has been testing and evaluating the prototype for about a year. Several enhancements and improvements are now being developed. The current version (1.1) of ASM is briefly described and an example of the modeling and analysis capabilities is illustrated.

  4. Asymptotic Cellular Growth Rate as the Effective Information Utilization Rate

    E-Print Network [OSTI]

    Pugatch, Rami; Tlusty, Tsvi

    2013-01-01T23:59:59.000Z

    We study the average asymptotic growth rate of cells in randomly fluctuating environments. Using a game-theoretic perspective, we show that any response strategy has an asymptotic growth rate, which is the sum of: (i) the maximal growth rate at the worst possible distribution of environments, (ii) relative information between the actual distribution of environments to the worst one, and (iii) information utilization rate which is the information rate of the sensory devices minus the "information dissipation rate", the amount of information not utilized by the cell for growth. In non-stationary environments, the optimal strategy is the time average of the instantaneous optimal strategy and the optimal switching times are evenly spaced in the statistical (Fisher) metric.

  5. Enhanced training effectiveness using automated student assessment.

    SciTech Connect (OSTI)

    Forsythe, James Chris

    2010-05-01T23:59:59.000Z

    Training simulators have become increasingly popular tools for instructing humans on performance in complex environments. However, the question of how to provide individualized and scenario-specific assessment and feedback to students remains largely an open question. In this work, we follow-up on previous evaluations of the Automated Expert Modeling and Automated Student Evaluation (AEMASE) system, which automatically assesses student performance based on observed examples of good and bad performance in a given domain. The current study provides an empirical evaluation of the enhanced training effectiveness achievable with this technology. In particular, we found that students given feedback via the AEMASE-based debrief tool performed significantly better than students given only instructor feedback.

  6. Accumulation and replacement of exchangeable sodium in soils of Southeast Texas under turfgrass and its effect on soil infiltration rate

    E-Print Network [OSTI]

    Aydemir, Salih

    2012-06-07T23:59:59.000Z

    in soils of this area. This study assessed the degree of Na accumulation on cation exchange sites as affected by gypsum treatments in soils that support turfgrass (bermudagrass) and the response of soil infiltration rate to different rates of gypsum...

  7. CLIMATE ACTION PLANNING TOOL FORMULAS AND ASSUMPTIONS

    E-Print Network [OSTI]

    energy at the same rate (energy use intensity) as existing campus buildings. Fleet operations buildings will consume energy at the same rate (energy use intensity) as existing campus buildings New buildings will consume energy at the same rate (energy use intensity) as existing campus buildings

  8. Visualization Tools for Lattice QCD - Final Report

    SciTech Connect (OSTI)

    Massimo Di Pierro

    2012-03-15T23:59:59.000Z

    Our research project is about the development of visualization tools for Lattice QCD. We developed various tools by extending existing libraries, adding new algorithms, exposing new APIs, and creating web interfaces (including the new NERSC gauge connection web site). Our tools cover the full stack of operations from automating download of data, to generating VTK #12;files (topological charge, plaquette, Polyakov lines, quark and meson propagators, currents), to turning the VTK #12;files into images, movies, and web pages. Some of the tools have their own web interfaces. Some Lattice QCD visualization have been created in the past but, to our knowledge, our tools are the only ones of their kind since they are general purpose, customizable, and relatively easy to use. We believe they will be valuable to physicists working in the #12;field. They can be used to better teach Lattice QCD concepts to new graduate students; they can be used to observe the changes in topological charge density and detect possible sources of bias in computations; they can be used to observe the convergence of the algorithms at a local level and determine possible problems; they can be used to probe heavy-light mesons with currents and determine their spatial distribution; they can be used to detect corrupted gauge configurations. There are some indirect results of this grant that will benefit a broader audience than Lattice QCD physicists.

  9. Tool to Compare Solar Energy Program Financing Options | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources Tool to Compare Solar Energy Program Financing Options Tool to Compare Solar Energy Program Financing Options This model is intended to be used for...

  10. a2 tool steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lalta Prasad; Virendra Kumar 7 International Journal of Machine Tools & Manufacture 39 (1999) 11571169 Investigation of a 2-D planar motor based machine tool Engineering Websites...

  11. Reliability Tools for Resonance Inspection of Light Metal Castings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reliability Tools for Resonance Inspection of Light Metal Castings Reliability Tools for Resonance Inspection of Light Metal Castings 2012 DOE Hydrogen and Fuel Cells Program and...

  12. An automated tool for three types of saturated hydraulic conductivity...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automated tool for three types of saturated hydraulic conductivity laboratory measurements. An automated tool for three types of saturated hydraulic conductivity laboratory...

  13. Eastern Energy Zones Mapping Tool Now Available | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Addthis The Eastern Interconnection States' Planning Council (EISPC) has released the Energy Zones (EZ) Mapping Tool, a free, web-based interactive tool that will help states...

  14. Renewable Energy Resource Maps and Screening Tools | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resource Maps and Screening Tools Renewable Energy Resource Maps and Screening Tools Renewable energy resources are available across the United States but vary greatly depending on...

  15. advanced design tools: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photon Source, an Office of Science User Facility Kemner, Ken 47 Computer-aided Tooling Design for Manufacturing Processes MIT - DSpace Summary: Tooling design for...

  16. Analysis Methods and Tools Standing Technical Committee Strategic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis Methods and Tools Standing Technical Committee Strategic Plan Analysis Methods and Tools Standing Technical Committee Strategic Plan This report outlines the gaps,...

  17. ORISE: Training Tools for Healthy Schools | How ORISE is Making...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training Tools for Healthy Schools CDC gains wider audience through e-learning developed by ORAU Training Tools for Healthy Schools ORAU instructional designers and developers are...

  18. Development of Design and Simulation Tool for Hybrid Geothermal...

    Broader source: Energy.gov (indexed) [DOE]

    Development of Design and Simulation Tool for Hybrid Geothermal Heat Pump System Development of Design and Simulation Tool for Hybrid Geothermal Heat Pump System This project will...

  19. DLFM library tools for large scale dynamic applications.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DLFM library tools for large scale dynamic applications DLFM library tools for large scale dynamic applications Large scale Python and other dynamic applications may spend huge...

  20. Tool Improves Electricity Demand Predictions to Make More Room...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tool Improves Electricity Demand Predictions to Make More Room for Renewables Tool Improves Electricity Demand Predictions to Make More Room for Renewables October 3, 2011 -...