Powered by Deep Web Technologies
Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Renewable Energy Technical Assessment Guide - TAG-RE: 2006  

Science Conference Proceedings (OSTI)

First published in 2000, the annual Renewable Energy Technical Assessment Guide (TAG-RE) provides a consistent basis for evaluating the economic feasibility of renewable generation technologies. The technologies include wind, solar photovoltaic (PV), solar thermal, biomass, geothermal, and emerging ocean energy conversion technologies. The 2006 edition is the sixth annual update of the EPRI TAG-RE.

2007-03-12T23:59:59.000Z

2

Renewable Energy Technical Assessment Guide--TAG-RE: 2007  

Science Conference Proceedings (OSTI)

First published in 2000, the annual Renewable Energy Technical Assessment Guide (TAG-RE) provides a consistent basis for evaluating the economic feasibility of renewable generation technologies, including wind, solar photovoltaic (PV), solar thermal, biomass, geothermal, and emerging ocean energy conversion technologies. The 2007 edition is the seventh annual update of the EPRI TAG-RE.

2008-03-17T23:59:59.000Z

3

Renewable Energy Technical Assessment Guide-TAG-RE: 2005  

Science Conference Proceedings (OSTI)

First published in 2000, the annual Renewable Energy Technical Assessment Guide (TAG-RE) provides a consistent basis for evaluating the economic feasibility of renewable generation technologies, including wind, solar photovoltaic (PV), solar thermal, biomass, geothermal, and emerging ocean energy conversion technologies. The 2005 edition is the fifth annual update of the EPRI TAG-RE.

2005-12-20T23:59:59.000Z

4

Technical Assessment Guide (TAG) - Generation Capacity Addition Topics: 2013  

Science Conference Proceedings (OSTI)

The Generation Capacity Addition Topics report was first published in 2012 and discussed the challenges facing the power industry with regard to capacity addition. This report is intended to be a companion report to the Technical Assessment Guide (TAGź) – Power Generation and Technology Options report (Electric Power Research Institute [EPRI] report 3002001434).BackgroundTAG is widely considered the industry standard and has been ...

2013-12-20T23:59:59.000Z

5

Renewable Energy Technical Assessment Guide--TAG-RE: 2008  

Science Conference Proceedings (OSTI)

First published in 2000, the annual Renewable Energy Technical Assessment Guide (TAG-RE) provides a consistent basis for evaluating the economic feasibility of renewable generation technologies, including wind, solar photovoltaic (PV), solar thermal, biomass, geothermal, and emerging ocean energy conversion technologies. The 2008 edition is the seventh annual update of the EPRI TAG-RE and includes a new chapter on river in-stream energy.

2008-12-18T23:59:59.000Z

6

Technical Assessment Guide (TAG) - Power Generation and Storage Technology Options  

Science Conference Proceedings (OSTI)

The EPRI Technical Assessment Guide (TAG)Power Generation and Storage Technology Options helps energy company decision makers optimize capital investments in power generation and energy storage infrastructure. The 2009 TAG has been significantly enhanced. The following topics are among those that are new or enhanced: several options on CO2 capture controls and costs for existing retrofits and for new Pulverized Coal and Combustion Turbine Combined Cycle plants; several options on hybrid and dry cooling f...

2009-12-11T23:59:59.000Z

7

TAGź Technical Assessment Guide: Volume 5: Distributed Resources  

Science Conference Proceedings (OSTI)

This 1999 edition of the Technical Assessment Guide: Distributed Resources (TAGź-DR) provides up-to-date information for use in preliminary planning for distributed resources (DR) evaluation and application. The report updates and expands on the 1997 edition, and includes information on both technological and business aspects of DR planning.

1999-11-19T23:59:59.000Z

8

Technical Assessment Guide -- Distributed Resources (TAG-DR)  

Science Conference Proceedings (OSTI)

This Technical Assessment Guide (TAGTM), Volume 5: Distributed Resources-1999 (TAG-DR) has been compiled by EPRI personnel for the use of EPRI member utility staff to provide a common basis for preliminary planning for distributed resource (DR) evaluation and application. This is the third edition of volume 5.The TAG-DR defines DR as the integrated or stand-alone use of small generation, storage, and load management and information technologies by end-use customers, utilities, and third parties in ways t...

1999-08-30T23:59:59.000Z

9

Technical Assessment Guide (TAG) -- Power Generation and Storage Technology Options: 2011 Update  

Science Conference Proceedings (OSTI)

The EPRI Technical Assessment Guide (TAG) Power Generation and Storage Technology Options provides cost and performance data and analysis for energy company decision makers to optimize capital investments in the power generation and energy storage infrastructure. The 2011 TAG has been significantly enhanced to reflect current market conditions and technology trends, with cost and performance updates for pulverized coal (PC), large combustion turbine (CT), nuclear, solar thermal (ST), photovoltaic (PV), b...

2011-12-30T23:59:59.000Z

10

Technical Assessment Guide (TAG) - Power Generation and Storage Technology Options: 2013 Topics (DRAFT)  

Science Conference Proceedings (OSTI)

The EPRI Technical Assessment Guide™ (TAGź)—Power Generation and Storage Technology Options report provides cost and performance data and analysis for energy company decision makers to optimize capital investments in the power generation and energy storage infrastructure. The topics chosen by the TAGź members in 2013 reflect the transition of the industry in the last few years from a heavily coal and nuclear technologies-based generation to natural ...

2013-12-12T23:59:59.000Z

11

Technical Assessment Guide (TAG) -- Power Generation and Storage Technology Options: 2010 Topics  

Science Conference Proceedings (OSTI)

The EPRI Technical Assessment Guide (TAG )151Power Generation and Storage Technology Options helps energy company decision makers optimize capital investments in the power generation and energy storage infrastructure. The 2010 TAG has been significantly enhanced to reflect current market conditions and technology trends, with cost and performance updates for pulverized coal (PC), large combustion turbine (CT) and combustion turbine combined-cycle (CTCC), nuclear, solar thermal (ST), photovoltaic (PV), b...

2010-12-21T23:59:59.000Z

12

Technical Assessment Guide (TAG) -- Power Generation and Storage Technology Options: 2012 Topics  

Science Conference Proceedings (OSTI)

This report provides cost and performance data and analysis for energy company decision makers to optimize capital investments in the power generation and energy storage infrastructure. The 2012 TAG has been significantly enhanced to reflect current topics of interest to members, which included market trends and integration and implementation of technologies from a planning perspective. In 2012, these topics included projected demand for large combustion turbine (CT) and combustion turbine ...

2013-03-06T23:59:59.000Z

13

Current Projects: Product Authenticity Tags - Vulnerability Assessment Team  

NLE Websites -- All DOE Office Websites (Extended Search)

Product Authenticity Tags Product Authenticity Tags VAT Projects Introducing the VAT Adversarial Vulnerability Assessments Safety Tags & Product Counterfeiting Election Security Spoofing GPS Defeating Existing Tamper-Indicating Seals Specialty Field Tools & Sampling Tools Insider Threat Mitigation Drug Testing Security Microprocessor Prototypes The Journal of Physical Security Vulnerability Assessments Vulnerability Assessments Insanely Fast ”Processor Shop Insanely Fast ”Processor Shop Seals About Seals Applications of Seals Common Myths about Tamper Indicating Seals Definitions Findings and Lessons Learned New Seals Types of Seals Seals References Selected VAT Papers Selected VAT Papers Selected Invited Talks Self-Assessment Survey Security Maxims Devil's Dictionary of Security Terms Argonne's VAT (brochure)

14

Field Guide: Coatings Assessment  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) has numerous products to help plant personnel meet the challenges of working with aging systems, structures, and components, but none that comprehensively address protective coatings and linings. This field guide provides a compilation of protective coating and lining information in a form that allows the user to have a ready reference available during condition assessment of the various protective coatings and linings used in the plant.

2012-05-14T23:59:59.000Z

15

GAO Cost Estimating and Assessment Guide | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GAO Cost Estimating and Assessment Guide GAO Cost Estimating and Assessment Guide GAO 12-Step Estimating Process.pdf More Documents & Publications EIR SOP Septmebr 2010 Microsoft...

16

Seismic Probabilistic Risk Assessment Implementation Guide  

Science Conference Proceedings (OSTI)

BackgroundThis report provides updates to the guidelines and approaches for seismic probabilistic risk assessments (SPRAs) that were published in the initial Electric Power Research Institute (EPRI) report Seismic Probabilistic Risk Assessment Implementation Guide (1002989) in 2003. It provides practical guidelines for SPRA development to support a variety of uses, including risk-informed applications.It is intended that a probabilistic risk ...

2013-12-18T23:59:59.000Z

17

In-Stage Assessment Process Guide | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

In-Stage Assessment Process Guide In-Stage Assessment Process Guide Provides guidance on conducting an In-Stage Assessment (ISA). An ISA is an independent review of a project's...

18

Annual Coded Wire Tag Program; Oregon Stock Assessment, 2001 Annual Report.  

DOE Green Energy (OSTI)

This annual report is in fulfillment of contract obligations with Bonneville Power Administration which is the funding source for the Oregon Department of Fish and Wildlife project 'Annual Stock Assessment - Coded Wire Tag Program (ODFW)'. Results for the 2001 contract period: Objective 1--Over 1 million juvenile salmon were coded-wire by this program (Table 1); Objective 2--ODFW recovered and processed over 40,000 snout collected from coded-wire tagged fish (Table 2); Objective 3--Survival data is summarized below; Objective 4--The last group of VIE tagged coho was released in 2001 and returning coho were samples at Sandy Hatchery. This sampling showed only 1 of 1,160 returning coho VIE marked as juveniles retained the VIE mark as adults.

Lewis, Mark; Mallette, Christine; Murray, William

2002-03-01T23:59:59.000Z

19

Seismic Probabilistic Risk Assessment Implementation Guide  

Science Conference Proceedings (OSTI)

The "SPRA Implementation Guide" provides utilities with in-depth guidelines for seismic probabilistic risk assessments (SPRAs). These cost-effective and practical procedures for SPRA support a variety of purposes, including risk-informed/performance-based (RI/PB) applications.

2003-12-31T23:59:59.000Z

20

Annual Stock Assessment - CWT [Coded Wire Tag program] (USFWS), Annual Report 2007.  

DOE Green Energy (OSTI)

In 1989 the Bonneville Power Administration (BPA) began funding the evaluation of production groups of juvenile anadromous fish not being coded-wire tagged for other programs. These groups were the 'Missing Production Groups'. Production fish released by the U.S. Fish and Wildlife Service (FWS) without representative coded-wire tags during the 1980s are indicated as blank spaces on the survival graphs in this report. This program is now referred to as 'Annual Stock Assessment - CWT'. The objectives of the 'Annual Stock Assessment' program are to: (1) estimate the total survival of each production group, (2) estimate the contribution of each production group to fisheries, and (3) prepare an annual report for USFWS hatcheries in the Columbia River basin. Coded-wire tag recovery information will be used to evaluate the relative success of individual brood stocks. This information can also be used by salmon harvest managers to develop plans to allow the harvest of excess hatchery fish while protecting threatened, endangered, or other stocks of concern. All fish release information, including marked/unmarked ratios, is reported to the Pacific States Marine Fisheries Commission (PSMFC). Fish recovered in the various fisheries or at the hatcheries are sampled to recover coded-wire tags. This recovery information is also reported to PSMFC. This report has been prepared annually starting with the report labeled 'Annual Report 1994'. Although the current report has the title 'Annual Report 2007', it was written in fall of 2008 using data available from RMIS that same year, and submitted as final in January 2009. The main objective of the report is to evaluate survival of groups which have been tagged under this ongoing project.

Pastor, Stephen M. [U.S. Fish and Wildlife Service, Columbia River Fisheries Program Office

2009-07-21T23:59:59.000Z

Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Annual Coded Wire Tag Program; Oregon Stock Assessment, Annual Report 2002.  

DOE Green Energy (OSTI)

This annual report is in fulfillment of contract obligations with Bonneville Power Administration which is the funding source for the Oregon Department of Fish and Wildlife project 'Annual Stock Assessment - Coded Wire Tag Program (ODFW)'. Results for the 2002 contract period: Objective 1 - Over 1 million juvenile salmon were coded-wire by this program (Table 1). This accounted for about 20% of the fish ODFW coded-wire tagged in 2002 for release in the Columbia Basin; Objective 2 - ODFW recovered and processed over 50,000 snouts collected from coded-wire tagged fish (Table 2); Objective 3 - The survival data summarized below includes results for coded-wire groups funded by this program as well as coded-wire groups funded from other sources; Objective 4 - The last returns of experimental groups of coho marked with VIE tags occurred in 2002 at Sandy Hatchery. This sampling showed that 26 of 67 jack coho and 1 of 2,223 adult coho VIE marked as juveniles retained the VIE mark as adults.

Lewis, Mark; Mallette, Christine; Murray, William

2003-03-01T23:59:59.000Z

22

Annual Coded Wire Tag Program; Oregon Stock Assessment, 2000 Annual Report.  

DOE Green Energy (OSTI)

This annual report is in fulfillment of contract obligations with Bonneville Power Administration which is the funding source for the Oregon Department of Fish and Wildlife's Annual Stock Assessment - Coded Wire Tag Program (ODFW) Project. Tule stock fall chinook were caught primarily in British Columbia and Washington ocean, and Columbia Basin fisheries. Up-river bright stock fall chinook contributed primarily to Alaska and British Columbia ocean commercial, Columbia Basin gillnet and freshwater sport fisheries. Contribution of Rogue stock fall chinook released in the lower Columbia River occurred primarily in Oregon ocean commercial, Columbia Basin gillnet and freshwater sport fisheries. Willamette stock spring chinook contributed primarily to Alaska and British Columbia ocean, and Columbia Basin sport fisheries. Willamette stock spring chinook released by CEDC contributed to similar ocean fisheries, but had much higher catch in Columbia Basin gillnet fisheries than the same stocks released in the Willamette Basin. Up-river stocks of spring chinook contributed almost exclusively to Columbia Basin fisheries. The up-river stocks of Columbia River summer steelhead contributed almost exclusively to the Columbia Basin gillnet and freshwater sport fisheries. Coho ocean fisheries from Washington to California were closed or very limited from 1994 through 1999 (1991 through 1996 broods). This has resulted in a lower percent of catch in Washington, Oregon and California ocean fisheries, and a higher percent of catch in Alaska and British Columbia ocean and Columbia Basin freshwater fisheries. Coho stocks released by ODFW below Bonneville Dam were caught mainly in Oregon, Washington, and British Columbia ocean, Columbia Gillnet and freshwater sport fisheries. Coho stocks released in the Klaskanine River and Youngs Bay area had similar ocean catch distributions, but a much higher percent catch in gillnet fisheries than the other coho releases. Ocean catch distribution of coho stocks released above Bonneville Dam was similar to the other coho groups. However, they had a higher percent catch in gillnet fisheries above Bonneville Dam than coho released below the dam. Survival rates of salmon and steelhead are influenced, not only by factors in the hatchery (disease, density, diet, size and time of release) but also by environmental factors in the river and ocean. These environmental factors are influenced by large scale oceanic and weather patterns such as El Nino. Changes in rearing conditions in the hatchery do impact survival, however, these can be offset by impacts caused by environmental factors. Coho salmon released in the Columbia River generally experience better survival rates when released later in the spring. However, for the 1990 brood year June releases of Columbia River coho had much lower survival than May releases, for all ODFW hatcheries. In general survival of ODFW Columbia River hatchery coho has declined to low levels in recent years. Preliminary results from the evaluation of Visual Implant Elastomer (VIE) tags showed tagging rate and pre-release tag retention improved from the first to second years of tagging. Tagging rate remained identical from 1999 to 2000 while pre-release tag retention dropped to 95%. Returning jack and adult salmon were sampled for CWT and VIE tags in the fall of 2000. Of 606 adults recovered at Sandy Fish Hatchery in 2000, only 1 or 0.2%, retained their VIE tag. Of 36 jacks recovered in 2000, 13 or 36.1% retained their VIE tag.

Lewis, Mark; Mallette, Christine; Murray, William

2002-03-01T23:59:59.000Z

23

Switching and Tagging Performance Standards and On-the-Job Assessments  

Science Conference Proceedings (OSTI)

Switching safety and reliability are ongoing concerns in the utility industry. This report summarizes the results of a small project that used the results of previous EPRI Switching Safety & Reliability studies to develop a set of "On-the-Job Assessments" that could be used to determine if incumbent field switchpersons and system operators meet performance standards when performing "error-likely" steps in switching and tagging for planned outages. The set of "On-the-Job Assessments" can be used to help m...

2004-10-25T23:59:59.000Z

24

Guide to Critical Infrastructure Protection Cyber Vulnerability Assessment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guide to Critical Infrastructure Protection Cyber Vulnerability Guide to Critical Infrastructure Protection Cyber Vulnerability Assessment Guide to Critical Infrastructure Protection Cyber Vulnerability Assessment This document describes a customized process for cyber vulnerability assessment in compliance with the Critical Infrastructure Protection standards adopted by the North American Electric Reliability Corporation in 2006. This guide covers the planning, execution, and reporting process. Guide to Critical Infrastructure Protection Cyber Vulnerability Assessment More Documents & Publications Wireless System Considerations When Implementing NERC Critical Infrastructure Protection Standards New No-Cost ANTFARM Tool Maps Control System Networks to Help Implement Cyber Security Standards "Cybersecurity for State Regulators" - NARUC Primer (June

25

Guide to Critical Infrastructure Protection Cyber Vulnerability Assessment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guide to Critical Infrastructure Protection Cyber Vulnerability Guide to Critical Infrastructure Protection Cyber Vulnerability Assessment Guide to Critical Infrastructure Protection Cyber Vulnerability Assessment This document describes a customized process for cyber vulnerability assessment in compliance with the Critical Infrastructure Protection standards adopted by the North American Electric Reliability Corporation in 2006. This guide covers the planning, execution, and reporting process. Guide to Critical Infrastructure Protection Cyber Vulnerability Assessment More Documents & Publications Wireless System Considerations When Implementing NERC Critical Infrastructure Protection Standards New No-Cost ANTFARM Tool Maps Control System Networks to Help Implement Cyber Security Standards "Cybersecurity for State Regulators" - NARUC Primer (June 2012)

26

Guide to Integrating Renewable Energy in Federal Construction: Assessing  

NLE Websites -- All DOE Office Websites (Extended Search)

Assessing Renewable Energy Options to someone by E-mail Assessing Renewable Energy Options to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Assessing Renewable Energy Options on Facebook Tweet about Guide to Integrating Renewable Energy in Federal Construction: Assessing Renewable Energy Options on Twitter Bookmark Guide to Integrating Renewable Energy in Federal Construction: Assessing Renewable Energy Options on Google Bookmark Guide to Integrating Renewable Energy in Federal Construction: Assessing Renewable Energy Options on Delicious Rank Guide to Integrating Renewable Energy in Federal Construction: Assessing Renewable Energy Options on Digg Find More places to share Guide to Integrating Renewable Energy in Federal Construction: Assessing Renewable Energy Options on AddThis.com...

27

Net Zero Energy Military Installations: A Guide to Assessment...  

NLE Websites -- All DOE Office Websites (Extended Search)

Net Zero Energy Military Installations: A Guide to Assessment and Planning Samuel Booth, John Barnett, Kari Burman, Josh Hambrick and Robert Westby Technical Report NREL...

28

Renewable Energy Technology Guide  

Science Conference Proceedings (OSTI)

First published in 2000 as the Renewable Energy Technical Assessment GuideTAG-RE, the Electric Power Research Institute's (EPRI's) annual Renewable Energy Technology Guide provides a consistent basis for evaluating the economic feasibility of renewable generation technologies. These technologies include wind, solar photovoltaic (PV), solar thermal, biomass, municipal solid waste, geothermal, and emerging ocean energy conversion technologies.

2011-12-22T23:59:59.000Z

29

GAO Cost Estimating and Assessment Guide  

E-Print Network (OSTI)

The U.S. Government Accountability Office is responsible for, among other things, assisting the Congress in its oversight of the federal government, including agencies ’ stewardship of public funds. To use public funds effectively, the government must meet the demands of today’s changing world by employing effective management practices and processes, including the measurement of government program performance. In addition, legislators, government officials, and the public want to know whether government programs are achieving their goals and what their costs are. To make those evaluations, reliable cost information is required and federal standards have been issued for the cost accounting that is needed to prepare that information. 1 We developed the Cost Guide in order to establish a consistent methodology that is based on best practices and that can be used across the federal government for developing, managing, and evaluating capital program cost estimates. For the purposes of this guide, a cost estimate is the summation of individual cost elements, using established methods and valid data, to estimate the future costs of a program, based on what is known today. 2 The management of a cost estimate involves continually updating the estimate with actual data as they become available, revising the estimate to reflect changes, and analyzing differences between estimated and actual costs—for example, using data from a reliable earned value management (EVM) system. 3 The ability to generate reliable cost estimates is a critical function, necessary to support the Office of Management and Budget’s (OMB) capital programming process. 4 Without this ability, agencies are at risk of experiencing cost overruns, missed deadlines, and performance shortfalls—all recurring problems that our program assessments too often reveal. Furthermore, cost increases often mean that the government

Best Practices For Developing

2009-01-01T23:59:59.000Z

30

Technical Assessment Guide -- Generation Capacity Addition Topics  

Science Conference Proceedings (OSTI)

This report discusses the challenges facing the power industry with regard to capacity addition. These challenges include technological and regulatory risks, life cycle management, and material and labor escalation forecast. The report also examines the market trends for CT and CTCC, as this technology has become a reliable technology for capacity addition, and provides the cost data for various switchyard configurations. These topics have been addressed in past TAG reports and the content in this ...

2013-03-06T23:59:59.000Z

31

Renewable Energy Technology Guide - 2012  

Science Conference Proceedings (OSTI)

First published in 2000 as the Renewable Energy Technical Assessment Guide—TAG-RE, the Electric Power Research Institute’s (EPRI’s) annual Renewable Energy Technology Guide provides a consistent basis for evaluating the economic feasibility of renewable generation technologies. These technologies include wind, solar photovoltaic (PV), solar thermal, biomass, municipal solid waste, geothermal, and emerging ocean energy conversion ...

2012-12-20T23:59:59.000Z

32

Renewable Energy Technology Guide: 2010  

Science Conference Proceedings (OSTI)

First published in 2000 as the Renewable Energy Technical Assessment GuideTAG-RE, the annual Electric Power Research Institute (EPRI) Renewable Energy Technology Guide provides a consistent basis for evaluating the economic feasibility of renewable generation technologies, including wind, solar photovoltaic (PV), solar thermal, biomass, geothermal, and emerging ocean energy conversion technologies.

2010-12-31T23:59:59.000Z

33

Guide for Piping Stress Analysis and Assessment  

Science Conference Proceedings (OSTI)

This report gives recommendations for piping analysis methods and integration with inspection and operating data to give estimates of risk and remaining life. The scope of the document is as follows: Objectives of piping assessment Selected literature review of assessment practices for piping and other relevant components Failure modes Inspection and operating data Piping analysis: methods and data Risk assessment Integration of analysis, inspection, and operating data for assessments and recommendations...

2010-12-23T23:59:59.000Z

34

Renewable Energy Technology Guide—RETG: 2009  

Science Conference Proceedings (OSTI)

First published in 2000, the annual Renewable Energy Technical Assessment GuideTAG-RE (now called the Renewable Energy Technology Guide) provides a consistent basis for evaluating the economic feasibility of renewable generation technologies, including wind, solar photovoltaic (PV), solar thermal, biomass, geothermal, and emerging ocean energy conversion technologies. The 2009 update is based on the 2008 edition of the Electric Power Research Institute (EPRI) TAG-RE, published in December 2008.

2010-06-01T23:59:59.000Z

35

Guide for Assessing Relicensing Risk for Hydropower Projects  

Science Conference Proceedings (OSTI)

Nearly two-thirds of hydropower projects relicensed between 1987 and 1991 lost both generating capacity and total annual energy; only one-tenth of relicensed projects showed any increase. This guide provides an overview of changes in relicensing and offers self-assessment guidelines for those utilities that are about to relicense their projects.

1993-11-01T23:59:59.000Z

36

DOE G 413.3-4A, Technology Readiness Assessment Guide  

Directives, Delegations, and Requirements

The Guide assists individuals and teams involved in conducting Technology Readiness Assessments (TRAs) and developing Technology Maturation Plans (TMPs) for ...

2011-09-15T23:59:59.000Z

37

NIST SP 800-53A Revision 1, Guide for Assessing the ...  

Science Conference Proceedings (OSTI)

Page 1. NIST Special Publication 800-53A Guide for Assessing the Security Revision 1 Controls in Federal Information Systems and Organizations ...

2012-02-06T23:59:59.000Z

38

An Assessment of Freeze Brand and PIT Tag Recovery Data at McNary Dam, 1987 Annual Report.  

DOE Green Energy (OSTI)

This study evaluated mark recovery data from PIT-tagged and freeze-branded fish recovered at McNary Dam in 1987. Hatchery and river-run populations of yearling chinook salmon (Oncorhynchus tshawytscha), sockeye salmon (O. nerka) and steelhead (O. mykiss) were used in this investigation. Paired groups of PIT-tagged and freeze-branded juvenile salmonids were released upstream from McNary Dam and subsequently recaptured at that site. PIT tags were recovered in significantly higher proportions than freeze brands regardless of species of stock. Furthermore, for chinook and sockeye salmon, PIT tag recovery data exhibited less variability. Reasons for the discrepant intermark recovery rates are discussed. 10 refs., 27 figs., 23 tabs.

McCutcheon, Clinton Scott

1989-01-01T23:59:59.000Z

39

Performing Energy Security Assessments - A How-To Guide for Federal Facility Managers  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Performing Energy Security Assessments - Performing Energy Security Assessments - A How-To Guide for Federal Facility Managers ii Contents EXECUTIVE SUMMARY ........................................................................................................ v 1. INTRODUCTION ............................................................................................................... 1 1.1 Facilities to be Assessed...........................................................................................................................1 2. BEGINNING THE ENERGY SECURITY ASSESSMENT PROCESS ............................... 2 2.1 Assign an Energy Security Manager .........................................................................................................2 2.2 Define the Mission of the Installation

40

Performing Energy Security Assessments - A How-To Guide for Federal Facility Managers  

NLE Websites -- All DOE Office Websites (Extended Search)

Performing Energy Security Assessments - Performing Energy Security Assessments - A How-To Guide for Federal Facility Managers ii Contents EXECUTIVE SUMMARY ........................................................................................................ v 1. INTRODUCTION ............................................................................................................... 1 1.1 Facilities to be Assessed...........................................................................................................................1 2. BEGINNING THE ENERGY SECURITY ASSESSMENT PROCESS ............................... 2 2.1 Assign an Energy Security Manager .........................................................................................................2 2.2 Define the Mission of the Installation

Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Tag: Partnerships  

NLE Websites -- All DOE Office Websites (Extended Search)

96/all en Hosting foreign educators 96/all en Hosting foreign educators http://www.y12.doe.gov/partnerships/y-12ut-collaboration/hosting-foreign-educators

We recently welcomed a group of professors from Indonesia.
42

Tag: UT  

NLE Websites -- All DOE Office Websites (Extended Search)

5/all en Hosting foreign educators 5/all en Hosting foreign educators http://www.y12.doe.gov/partnerships/y-12ut-collaboration/hosting-foreign-educators

We recently welcomed a group of professors from Indonesia.
43

Tag: Safety  

NLE Websites -- All DOE Office Websites (Extended Search)

8/all en Red light, green light 8/all en Red light, green light http://www.y12.doe.gov/employees-retirees/y-12-times/red-light-green-light

Even in the face of a furlough, we were thorough, professional and kept an eye on safety and security.
  • tag" title="Red light, green light">Read more about Red light, green light

  • 44

    Tag: ESH  

    NLE Websites -- All DOE Office Websites (Extended Search)

    2/all en Red light, green light 2/all en Red light, green light http://www.y12.doe.gov/employees-retirees/y-12-times/red-light-green-light

    Even in the face of a furlough, we were thorough, professional and kept an eye on safety and security.
  • tag" title="Red light, green light">Read more about Red light, green light

  • 45

    TAGGING CO  

    NLE Websites -- All DOE Office Websites (Extended Search)

    0-22, 2013 0-22, 2013 2 Presentation Outline * Benefit to the program * Project overview: Why 14 C for MVA? * Technical status: Cartridges, injections, lasers * Summary * Organizational chart * Collaborators 3 Benefit to the Program * Develop technologies to demonstrate that 99 percent of injected CO 2 remains in the injection zones. Permanent storage of CO 2 can be demonstrated by adding carbon-14 ( 14 C) prior to injection. This research project aims to demonstrate this by tagging fossil CO 2 with 14 C at a field site. When completed, this system will show that 14 C can be a safe and effective tracer for sequestered CO 2 . A laser-based 14 C measurement method is being adapted for continuous monitoring. This technology contributes to the Carbon Storage Program's effort of ensuring 99 percent

    46

    GUIDES  

    SciTech Connect

    Hanford Atomic Production Operation specification guides for equipment and procedures, instrumentation, structural engineering, welding, design criteria, electrical engineering, and construction repairs are presented. Details of this manual are given in TID-4100(Suppl.). (N.W.R.)

    1963-01-01T23:59:59.000Z

    47

    Neural net controlled tag gas sampling system for nuclear reactors  

    DOE Patents (OSTI)

    A method and system for providing a tag gas identifier to a nuclear fuel rod and analyze escaped tag gas to identify a particular failed nuclear fuel rod. The method and system include disposing a unique tag gas composition into a plenum of a nuclear fuel rod, monitoring gamma ray activity, analyzing gamma ray signals to assess whether a nuclear fuel rod has failed and is emitting tag gas, activating a tag gas sampling and analysis system upon sensing tag gas emission from a failed nuclear rod and evaluating the escaped tag gas to identify the particular failed nuclear fuel rod.

    Gross, Kenneth C. (Bolingbrook, IL); Laug, Matthew T. (Idaho Fall, ID); Lambert, John D. B. (Wheaton, IL); Herzog, James P. (Downers Grove, IL)

    1997-01-01T23:59:59.000Z

    48

    Renewable Energy Technical Assessment: Electricité de France Annual Update—2009  

    Science Conference Proceedings (OSTI)

    First published in 2000, the annual Renewable Energy Technical Assessment GuideTAG-RE (now called the Renewable Energy Technology Guide, or RETG) provides a consistent basis for evaluating the economic feasibility of renewable generation technologies, including wind, solar photovoltaic (PV), solar thermal, biomass, geothermal, and emerging ocean energy conversion technologies. This 2009 edition updates findings detailed in the 2008 edition of the Electric Power Research Institute (EPRI) TAG-RE, published...

    2010-11-21T23:59:59.000Z

    49

    Contextual tag inference  

    Science Conference Proceedings (OSTI)

    This article examines the use of two kinds of context to improve the results of content-based music taggers: the relationships between tags and between the clips of songs that are tagged. We show that users agree more on tags applied to clips temporally ... Keywords: Autotagging, clips, context, music, smoothing, tags

    Michael I. Mandel; Razvan Pascanu; Douglas Eck; Yoshua Bengio; Luca M. Aiello; Rossano Schifanella; Filippo Menczer

    2011-10-01T23:59:59.000Z

    50

    Overhead Transmission Inspection, Assessment, and Asset Management Reference Guide - 2013  

    Science Conference Proceedings (OSTI)

    The emphasis within the transmission arena has shifted from designing and building new transmission facilities to optimizing the use, performance, and life of existing facilities. In the early 1990s, EPRI established an initiative to examine the capabilities and limitations of existing inspection and assess­ment methods and technology. One of the key needs identified was information on methods and tech­nologies for inspecting/assessing the conditions ...

    2013-12-22T23:59:59.000Z

    51

    Study Guides for Written and Hands-On Assessments  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Grinder Horizontal Saw Vertical Saw Surface Grinder Crystal Cutter Vertical Milling Machine Machine Tool Hands-On Assessments Belt Sander Disk Sander Drill Press Engine...

    52

    GAO Cost Estimating and Assessment Guide Twelve Steps of a High-Quality Cost Estimating Process  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    GAO Cost Estimating and Assessment Guide GAO Cost Estimating and Assessment Guide Twelve Steps of a High-Quality Cost Estimating Process Step Description Associated task 1 Define estimate's purpose Determine estimate's purpose, required level of detail, and overall scope; Determine who will receive the estimate 2 Develop estimating plan Determine the cost estimating team and develop its master schedule; Determine who will do the independent cost estimate; Outline the cost estimating approach; Develop the estimate timeline 3 Define program characteristics In a technical baseline description document, identify the program's

    53

    BNL Newsroom | Tags Index  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Tag IndexMedia & Communications Office Tag IndexMedia & Communications Office Newsroom Photos Image Library Historic Images Photo Permissions Videos Fact Sheets Lab History News Categories Contacts Currently Showing News Release Tags Show Tags for News Releases Features Videos What is this? The tag cloud shows the relative proportion of tags assigned to each news release. Click on any tag to see news releases associated with that tag. AAAS (8) accelerators (7) addiction (43) AGS (1) ARRA (12) ATLAS (22) award (100) battelle (8) BERA (1) biochemistry (14) biology (63) biosciences (13) blueprint (2) BNL lecture (1) BOSS (3) bridge contest (5) BSA (26) BSA distinguished lecture (13) BWIS (23) BWIS lecture (21) cancer research (13) catalysis (22) celebrations (4) CES (1) CFN (89) chemistry (61) commercial (43) community (21)

    54

    Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR). Version 3.5, Quick Reference Guide  

    Science Conference Proceedings (OSTI)

    This Reference Guide contains instructions on how to install and use Version 3.5 of the NRC-sponsored Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR). The NUCLARR data management system is contained in compressed files on the floppy diskettes that accompany this Reference Guide. NUCLARR is comprised of hardware component failure data (HCFD) and human error probability (HEP) data, both of which are available via a user-friendly, menu driven retrieval system. The data may be saved to a file in a format compatible with IRRAS 3.0 and commercially available statistical packages, or used to formulate log-plots and reports of data retrieval and aggregation findings.

    Gilbert, B.G.; Richards, R.E.; Reece, W.J.; Gertman, D.I.

    1992-10-01T23:59:59.000Z

    55

    Net Zero Energy Military Installations: A Guide to Assessment and Planning  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Net Zero Energy Military Net Zero Energy Military Installations: A Guide to Assessment and Planning Samuel Booth, John Barnett, Kari Burman, Josh Hambrick and Robert Westby Technical Report NREL/TP-7A2-48876 August 2010 Technical Report Net Zero Energy Military NREL/TP-7A2-48876 Installations: A Guide to August 2010 Assessment and Planning Samuel Booth, John Barnett, Kari Burman, Josh Hambrick and Robert Westby Prepared under Task No. IDOD.1010 National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Operated by the Alliance for Sustainable Energy, LLC Contract No. DE-AC36-08-GO28308 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government.

    56

    Technology Readiness Assessment (TRA)/Technology Maturation Plan (TMP) Process Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    U U U . . S S . . D D e e p p a a r r t t m m e e n n t t o o f f E E n n e e r r g g y y O O f f f f i i c c e e o o f f E E n n v v i i r r o o n n m m e e n n t t a a l l M M a a n n a a g g e e m m e e n n t t Technology Readiness Assessment (TRA) / Technology Maturation Plan (TMP) Process Guide March 2008 U.S. DOE Office of Environmental Management March 2008 TRA/TMP Process Guide Page 2 of 48 TABLE OF CONTENTS 1.0 INTRODUCTION ...................................................................................................................... 4 1.1 Document Purpose............................................................................................................................ 4 2.0 OVERVIEW OF TECHNOLOGY READINESS ASSESSMENTS AND TECHNOLOGY MATURATION PLANS ............................................................................................................

    57

    Technology Assessment and Application Guide for a Capacitor-Based Voltage Sag Compensator  

    Science Conference Proceedings (OSTI)

    Voltage sags and momentary interruptions result in a significant amount of process shutdowns for industrial customers. Voltage sag compensation devices help mitigate sags for susceptible devices and components, allowing for more reliable and robust process performance. This report provides a technology assessment and application guide for Marathon Power's Voltage Sag Compensator, a 120-V, 750-VA unit designed to provide AC backup power to sensitive electronic loads.

    2009-12-22T23:59:59.000Z

    58

    Automatic tagging by exploring tag information capability and correlation  

    Science Conference Proceedings (OSTI)

    Automatic tagging can automatically label images and videos with semantic tags to significantly facilitate multimedia search and organization. However, most of existing tagging algorithms often don't differentiate between tags used to describe visual ... Keywords: automatic tagging, information capability, set correlation

    Xiaoming Zhang; Zi Huang; Heng Tao Shen; Yang Yang; Zhoujun Li

    2012-05-01T23:59:59.000Z

    59

    Comparative Performance of Acoustic-tagged and PIT-tagged Juvenile Salmonids  

    Science Conference Proceedings (OSTI)

    Numerous research tools and technologies are currently being used to evaluate fish passage and survival to determine the impacts of the Federal Columbia River Power System (FCRPS) on endangered and threatened juvenile salmonids, including PIT tags, balloon tags, hydroacoustic evaluations, radio telemetry, and acoustic telemetry. Each has advantages and disadvantages, but options are restricted in some situations because of limited capabilities of a specific technology, lack of detection capability downstream, or availability of adequate numbers of fish. However, there remains concern about the comparative effects of the tag or the tagging procedure on fish performance. The recently developed Juvenile Salmonid Acoustic Telemetry System (JSATS) acoustic transmitter is the smallest active acoustic tag currently available. The goal of this study was to determine whether fish tagged with the JSATS acoustic-telemetry tag can provide unbiased estimates of passage behavior and survival within the performance life of the tag. We conducted both field and laboratory studies to assess tag effects. For the field evaluation we released a total of 996 acoustic-tagged fish in conjunction with 21,026 PIT-tagged fish into the tailrace of Lower Granite Dam on 6 and 13 May. Travel times between release and downstream dams were not significantly different for the majority of the reaches between acoustic-tagged and PIT-tagged fish. In addition to the field evaluation, a series of laboratory experiments were conducted to determine if growth and survival of juvenile Chinook salmon surgically implanted with acoustic transmitters is different than untagged or PIT tagged juvenile Chinook salmon. Only yearling fish with integrated and non-integrated transmitters experienced mortalities, and these were low (tag treatments ranged up to 7.7% while integrated and non-integrated treatments had slightly higher rates (up to 8.3% and 7.9% respectively). No acoustic transmitters were shed by yearling fish during the course of the 90 day study. Up to 7.8% of subyearling fish expelled transmitters. Tags were expelled from 5 to 63 days post-surgery. The average time to expulsion was 27 days; few fish expelled transmitters within 14 days of implantation or less. Histological results suggest that inflammation associated with implantation of an acoustic transmitter can produce fibrous tissue which can invade and possibly damage internal organs soon after implantation. Reactions severe enough to damage organs however, were limited to only ~20% of subyearling Chinook salmon, all of which were under 101mm and 12g at tagging. The infiltration of the fibrous tissue into organs was observed most often in fish held for 21 days and appeared to decrease in subsequent holding times.

    Hockersmith, Eric E.; Brown, Richard S.; Liedtke, Theresa L.

    2008-02-01T23:59:59.000Z

    60

    Comparative Performance of Acoustic-tagged and PIT-tagged Juvenile Salmonids  

    DOE Green Energy (OSTI)

    Numerous research tools and technologies are currently being used to evaluate fish passage and survival to determine the impacts of the Federal Columbia River Power System (FCRPS) on endangered and threatened juvenile salmonids, including PIT tags, balloon tags, hydroacoustic evaluations, radio telemetry, and acoustic telemetry. Each has advantages and disadvantages, but options are restricted in some situations because of limited capabilities of a specific technology, lack of detection capability downstream, or availability of adequate numbers of fish. However, there remains concern about the comparative effects of the tag or the tagging procedure on fish performance. The recently developed Juvenile Salmonid Acoustic Telemetry System (JSATS) acoustic transmitter is the smallest active acoustic tag currently available. The goal of this study was to determine whether fish tagged with the JSATS acoustic-telemetry tag can provide unbiased estimates of passage behavior and survival within the performance life of the tag. We conducted both field and laboratory studies to assess tag effects. For the field evaluation we released a total of 996 acoustic-tagged fish in conjunction with 21,026 PIT-tagged fish into the tailrace of Lower Granite Dam on 6 and 13 May. Travel times between release and downstream dams were not significantly different for the majority of the reaches between acoustic-tagged and PIT-tagged fish. In addition to the field evaluation, a series of laboratory experiments were conducted to determine if growth and survival of juvenile Chinook salmon surgically implanted with acoustic transmitters is different than untagged or PIT tagged juvenile Chinook salmon. Only yearling fish with integrated and non-integrated transmitters experienced mortalities, and these were low (<4.5%). Mortality among sub-yearling control and PIT-tag treatments ranged up to 7.7% while integrated and non-integrated treatments had slightly higher rates (up to 8.3% and 7.9% respectively). No acoustic transmitters were shed by yearling fish during the course of the 90 day study. Up to 7.8% of subyearling fish expelled transmitters. Tags were expelled from 5 to 63 days post-surgery. The average time to expulsion was 27 days; few fish expelled transmitters within 14 days of implantation or less. Histological results suggest that inflammation associated with implantation of an acoustic transmitter can produce fibrous tissue which can invade and possibly damage internal organs soon after implantation. Reactions severe enough to damage organs however, were limited to only ~20% of subyearling Chinook salmon, all of which were under 101mm and 12g at tagging. The infiltration of the fibrous tissue into organs was observed most often in fish held for 21 days and appeared to decrease in subsequent holding times.

    Hockersmith, Eric E.; Brown, Richard S.; Liedtke, Theresa L.

    2008-02-01T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    61

    Ubiquitous Electronic Tagging  

    E-Print Network (OSTI)

    The automatic identification industry is growing rapidly. Tags occur in many forms and appear on everything from luggage at the airport, to dogs, trains and fresh fruit. As with many advancing technologies, there are a variety of standards that do not inter-operate and thus hinder widespread deployment. But the trend for the growth of this technology is inescapable: electronic machine-readable tags (e-tags) are becoming tiny, cheap and easy to deploy. An e-tag can now also serve as a data repository for the object that it is attached to. Imagine if every object ever processed had one or more machine-readable tags embedded into it. What applications would that enable? These tags would uniquely identify the object and be readable from a distance, not even requiring a battery. In addition to identification information, e-tags can record their history, or offer dynamic data from an embedded sensor indicating, for example, the tag's temperature. This paper examines the applications and co...

    Roy Want; Daniel M. Russell

    1999-01-01T23:59:59.000Z

    62

    Navigating the tag genome  

    Science Conference Proceedings (OSTI)

    Tags help users understand a rich information space, by showing them specific text annotations for each item in the space and enabling them to search by these annotations. Often, however, users may wish to move from one item to other items that are similar ... Keywords: conversational recommenders, recommender systems, tagging

    Jesse Vig; Shilad Sen; John Riedl

    2011-02-01T23:59:59.000Z

    64

    DOE G 414.1-1B: Management and Assessments Guide for Use with 10 CFR Part  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    DOE G 414.1-1B: Management and Assessments Guide for Use with 10 DOE G 414.1-1B: Management and Assessments Guide for Use with 10 CFR Part 830, Subpart A, and DOE O 414.1C, Quality Assurance; DOE M 450.4-1, Integrated Safety Management System Manual; and DOE O 226.1A, Implementation of Department of Energy Oversight Po DOE G 414.1-1B: Management and Assessments Guide for Use with 10 CFR Part 830, Subpart A, and DOE O 414.1C, Quality Assurance; DOE M 450.4-1, Integrated Safety Management System Manual; and DOE O 226.1A, Implementation of Department of Energy Oversight Po "DOE and its contractors are required to perform management and independent assessments in accordance with: * Title 10, Code of Federal Regulations (CFR), Part 830, Subpart A, "Quality Assurance Requirements"; * DOE O 414.1C, Quality Assurance;

    65

    DOE G 414.1-1B: Management and Assessments Guide for Use with 10 CFR Part  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    DOE G 414.1-1B: Management and Assessments Guide for Use with 10 DOE G 414.1-1B: Management and Assessments Guide for Use with 10 CFR Part 830, Subpart A, and DOE O 414.1C, Quality Assurance; DOE M 450.4-1, Integrated Safety Management System Manual; and DOE O 226.1A, Implementation of Department of Energy Oversight Po DOE G 414.1-1B: Management and Assessments Guide for Use with 10 CFR Part 830, Subpart A, and DOE O 414.1C, Quality Assurance; DOE M 450.4-1, Integrated Safety Management System Manual; and DOE O 226.1A, Implementation of Department of Energy Oversight Po "DOE and its contractors are required to perform management and independent assessments in accordance with: * Title 10, Code of Federal Regulations (CFR), Part 830, Subpart A, "Quality Assurance Requirements"; * DOE O 414.1C, Quality Assurance;

    66

    Implementation guide for use with DOE Order 440.1: Occupational exposure assessment  

    Science Conference Proceedings (OSTI)

    DOE O 440.1, Worker Protection Management for DOE Federal and Contractor Employees, establishes the framework for an effective worker protection program that will reduce or prevent accidental injuries and illnesses. One element of the worker protection program in DOE O 440.1 is Exposure Assessment (EA). This Guide provides acceptable methodologies for conducting EA for workers. Exposure assessment should be included in the DOE and contractor written worker protection program, as required by DOE O 440.1. EA documentation should describe the methods and rationale a site uses to characterize and monitor workers` potential and actual exposures to hazardous agents. DOE O 440.1 applies to all activities (including design, construction, operation, maintenance, decontamination and decommissioning, research and development, and environmental restoration activities) performed by DOE and its contractors (and their subcontractors).

    NONE

    1998-03-30T23:59:59.000Z

    67

    Associated Particle Tagging (APT) in Magnetic Spectrometers  

    SciTech Connect

    Summary In Brief The Associated Particle Tagging (APT) project, a collaboration of Pacific Northwest National Laboratory (PNNL), Idaho National Laboratory (INL) and the Idaho State University (ISU)/Idaho Accelerator Center (IAC), has completed an exploratory study to assess the role of magnetic spectrometers as the linchpin technology in next-generation tagged-neutron and tagged-photon active interrogation (AI). The computational study considered two principle concepts: (1) the application of a solenoidal alpha-particle spectrometer to a next-generation, large-emittance neutron generator for use in the associated particle imaging technique, and (2) the application of tagged photon beams to the detection of fissile material via active interrogation. In both cases, a magnetic spectrometer momentum-analyzes charged particles (in the neutron case, alpha particles accompanying neutron generation in the D-T reaction; in the tagged photon case, post-bremsstrahlung electrons) to define kinematic properties of the relevant neutral interrogation probe particle (i.e. neutron or photon). The main conclusions of the study can be briefly summarized as follows: Neutron generator: • For the solenoidal spectrometer concept, magnetic field strengths of order 1 Tesla or greater are required to keep the transverse size of the spectrometer smaller than 1 meter. The notional magnetic spectrometer design evaluated in this feasibility study uses a 5-T magnetic field and a borehole radius of 18 cm. • The design shows a potential for 4.5 Sr tagged neutron solid angle, a factor of 4.5 larger than achievable with current API neutron-generator designs. • The potential angular resolution for such a tagged neutron beam can be less than 0.5o for modest Si-detector position resolution (3 mm). Further improvement in angular resolution can be made by using Si-detectors with better position resolution. • The report documents several features of a notional generator design incorporating the alpha-particle spectrometer concept, and outlines challenges involved in the magnetic field design. Tagged photon interrogation: • We investigated a method for discriminating fissile from benign cargo-material response to an energy-tagged photon beam. The method relies upon coincident detection of the tagged photon and a photoneutron or photofission neutron produced in the target material. The method exploits differences in the shape of the neutron production cross section as a function of incident photon energy in order to discriminate photofission yield from photoneutrons emitted by non-fissile materials. Computational tests of the interrogation method as applied to material composition assay of a simple, multi-layer target suggest that the tagged-photon information facilitates precise (order 1% thickness uncertainty) reconstruction of the constituent thicknesses of fissile (uranium) and high-Z (Pb) constituents of the test targets in a few minutes of photon-beam exposure. We assumed an 18-MeV endpoint tagged photon beam for these simulations. • The report addresses several candidate design and data analysis issues for beamline infrastructure required to produce a tagged photon beam in a notional AI-dedicated facility, including the accelerator and tagging spectrometer.

    Jordan, David V.; Baciak, James E.; Stave, Sean C.; Chichester, David; Dale, Daniel; Kim, Yujong; Harmon, Frank

    2012-10-16T23:59:59.000Z

    68

    Renewable Energy Technology Assessment: Electricite de France Annual Update 2010  

    Science Conference Proceedings (OSTI)

    First published in 2000 as the Renewable Energy Technical Assessment GuideTAG-RE, the annual Renewable Energy Technology Guide (RETG) provides a consistent basis for evaluating the economic feasibility of renewable generation technologies, including wind, solar photovoltaic (PV), solar thermal, biomass, geothermal, and emerging ocean energy conversion technologies. This report excerpts five chapters from the 2010 edition of the EPRI RETG, published in December 2010including, the Introduction, Solar Photo...

    2011-02-28T23:59:59.000Z

    69

    Tagged MRI-based studies of cardiac function  

    Science Conference Proceedings (OSTI)

    Tagged MRI provides a potentially powerful new way to noninvasively assess the regional function of the heart. Although its potential has not yet been fully realized, due to remaining technical limitations in image acquisition and analysis, good progress ...

    Leon Axel

    2003-06-01T23:59:59.000Z

    70

    Distributed RFID Tag Storage Infrastructures  

    E-Print Network (OSTI)

    Abstract. We leverage increasing passive RFID tag memory to propose distributed RFID tag storage infrastructures (D-RFID stores). A D-RFID store is a large set of tags with significantly sized re-writeable storage. Interrogators interact with D-RFID stores by reading from and writing to tags, providing a wide range of possible applications that are otherwise resource-inefficient. Examples include tagging trees in a forest to track hikers, interactive smart posters to provide location-based social interaction and collaboration, and tags transporting digital information in situations where reliable network connectivity is not available. We propose a system architecture for D-RFID stores by describing the tag distribution in space and time, different storage structures, and the middleware linking the different components together. We also describe assurance in our system. We motivate D-RFID stores through examples and describe potential avenues of research. 1

    Victor K. Y. Wu; Mirko Montanari; Nitin H. Vaidya; Roy H. Campbell

    2009-01-01T23:59:59.000Z

    71

    Tagging explosives with sulfur hexafluoride  

    DOE Patents (OSTI)

    Method and apparatus for tagging explosives with a source of SF.sub.6 permitting the detection of their presence utilizing sensitive sniffing apparatus.

    Dietz, Russell N. (Shoreham, NY); Cote, Edgar A. (Yaphank, NY); Vogel, William (East Islip, NY); Dempsey, John C. (Frederick, MD)

    1976-11-16T23:59:59.000Z

    72

    Assessment of Hot Cell Examination of AREVA M5(R) Guide Tubes and Fuel Rods Irradiated in North Anna 1 and 2  

    Science Conference Proceedings (OSTI)

    This report describes a vendor assessment of the hot cell examinations of guide tubes and fuel rods fabricated with the advanced M5 alloy and irradiated in North Anna Units 1 and 2 to exposures beyond current fuel licensing limits.

    2009-09-29T23:59:59.000Z

    73

    Design and Analysis of Salmonid Tagging Studies in the Columbia Basin, Volume X; Instructional Guide to Using Program Capthist to Create SURPH Files for Survival Analysis Using PTAGIS Data Files, 1997 Technical Report.  

    DOE Green Energy (OSTI)

    The SURPH program is a valuable tool for estimating survivals and capture probabilities of fish outmigrations on the Snake and Columbia Rivers. Using special data files, SURPH computes reach to reach statistics for any release group passing a system of detection sites. Because the data must be recorded for individual fish, PIT tag data is best suited for use as input. However, PIT tag data as available from PTAGIS comes in a form that is not ready for use as SURPH input. SURPH requires a capture history for each fish. A capture history consists of a series of fields, one for each detection site, that has a code for whether the fish was detected and returned to the river, detected and removed, or not detected. For the PTAGIS data to be usable by SURPH it must be pre-processed. The data must be condensed down to one line per fish with the relevant detection information from the PTAGIS file represented compactly on each line. In addition, the PTAGIS data file coil information must be passed through a series of logic algorithms to determine whether or not a fish is returned to the river after detection. Program CaptHist was developed to properly pre-process the PTAGIS data files for input to program SURPH. This utility takes PTAGIS data files as input and creates a SURPH data file as well as other output including travel time records, detection date records, and a data error file. CaptHist allows a user to download PTAGIS files and easily process the data for use with SURPH.

    Westhagen, Peter; Skalski, John R. [Univ. of Washington, Seattle, WA (United States). School of Fisheries. Fisheries Research Institute.

    1997-12-01T23:59:59.000Z

    74

    Tag: coat drive  

    NLE Websites -- All DOE Office Websites (Extended Search)

    9/all en Warm coats, big thanks 9/all en Warm coats, big thanks http://www.y12.doe.gov/community/warm-coats-big-thanks

    Y-12 employees help people face some of the coldest temperatures East Tennessee has seen in a long time.
  • tag" title="Warm coats, big thanks">Read more about Warm coats, big thanks Thu, 09 Jan 2014 19:23:39 +0000 pam

  • 75

    Tag: Naval Reactors  

    NLE Websites -- All DOE Office Websites (Extended Search)

    9/all en "Cook"ing at Y-12 for 70 9/all en "Cook"ing at Y-12 for 70 years http://www.y12.doe.gov/employees-retirees/y-12-times/cooking-y-12-70-years

    We have an enduring mission. Y-12 plays a key role in it. And a nuclear deterrent remains the ultimate insurance policy for America.
    76

    Document recommendation in social tagging services  

    Science Conference Proceedings (OSTI)

    Social tagging services allow users to annotate various online resources with freely chosen keywords (tags). They not only facilitate the users in finding and organizing online resources, but also provide meaningful collaborative semantic data which ... Keywords: recommender systems, social tagging

    Ziyu Guan; Can Wang; Jiajun Bu; Chun Chen; Kun Yang; Deng Cai; Xiaofei He

    2010-04-01T23:59:59.000Z

    77

    Information Solutions: Improving Search Results - Meta Tags  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Improving Search Results - Meta Tags Definition and Usage Metadata is data (information) about data. The tag provides metadata about the HTML document. Metadata will not be...

    78

    Aging Wire Insulation Assessment by Phase Spectrum Examination of Ultrasonic Guided Waves  

    E-Print Network (OSTI)

    Wire integrity has become an area of concern to the aerospace community including DoD, NASA, FAA, and Industry. Over time and changing environmental conditions, wire insulation can become brittle and crack. The cracks expose the wire conductor and can be a source of equipment failure, short circuits, smoke, and fire. The technique of using the ultrasonic phase spectrum to extract material properties of the insulation is being examined. Ultrasonic guided waves will propagate in both the wire conductor and insulation. Assuming the condition of the conductor remains constant then the stiffness of the insulator can be determined by measuring the ultrasonic guided wave velocity. In the phase spectrum method the guided wave velocity is obtained by transforming the time base waveform to the frequency domain and taking the phase difference between two waveforms. The result can then be correlated with a database, derived by numerical model calculations, to extract material properties of the wire insulator. Initial laboratory tests were performed on a simple model consisting of a solid cylinder and then a solid cylinder with a polymer coating. For each sample the flexural mode waveform was identified. That waveform was then transformed to the frequency domain and a phase spectrum was calculated from a pair of waveforms. Experimental results on the simple model compared well to numerical calculations. Further tests were conducted on aircraft or mil-spec wire samples, to see if changes in wire insulation stiffness can be extracted using the phase spectrum technique.

    Robert F. Anastasi; Eric I. Madaras

    2003-01-01T23:59:59.000Z

    79

    Design and Analysis of Salmonid Tagging Studies in the Columbia Basin, Volume VI; Assessment of Season-Wide Survival of Snake River Yearling Chinook Salmon, 1994-1996 Technical Report.  

    SciTech Connect

    Project 8910700, Epidemiological Survival Methods, was developed to provide statistical guidance on design and analysis of PIT-tag (Passive Integrated Transponder) survival studies to the Northwest fisheries community.

    Skalski, John R.; Perez-Comas, Jose A. (University of Washington, School of Fisheries, Fisheries Research Institute, Seattle, WA); Smith, Steven G. (National Marine Fisheries Service, Northwest Fisheries Science Center, Seattle, WA)

    1998-06-01T23:59:59.000Z

    80

    Investigating the Use of Ultrasonic Guided Waves for Aging Wire Insulation Assessment  

    E-Print Network (OSTI)

    Aging wiring has become a critical issue to DoD, NASA, FAA, and Industry. The problem is that insulation on environmentally aged wire becomes brittle and cracks. This exposes the underlying conductive wire to the potential for short circuits and fire. The difficulty is that techniques to monitor aging wire problems focus on applying electrical sensing techniques that are not very sensitive to the wire insulation. Thus, the development of methods to quantify and monitor aging wire insulation is highly warranted. Measurement of wire insulation stiffness by ultrasonic guided waves is being examined. Initial laboratory tests were performed on a simple model consisting of a solid cylinder and then a solid cylinder with a polymer coating. Experimental measurements showed that the lowest order axisymmetric mode may be sensitive to stiffness changes in the wire insulation. To test this theory, mil-spec wire samples MIL-W-81381, MIL-W-22759/34, and MIL-W-22759/87 (typically found in aircraft) were heat-damaged in an oven, in a range of heating conditions. The samples were 12, 16, and 20 gauge and the heat-damage introduced material changes in the wire-insulation that made the originally flexible insulation brittle and darker in color. Axisymmetric mode phasevelocity increased for the samples that were exposed to heat for longer duration. For example, the phase velocity in the 20-gauge MIL-W-22759/34 wire changed from a baseline value of 2790m/s to 3280m/s and 3530m/s for one-hour exposures to 349 C and 399 C, respectively. Although the heat-damage conditions are not the same as environmental aging, we believe that with further development and refinements, the ultrasonic guided waves can be used to inspect wire-insulation for detrimental environmental aging conditions.

    Robert F. Anastasi; Eric I. Madaras

    2002-01-01T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    81

    A Further Assessment of Treatment Effects in the Florida Area Cumulus Experiment through Guided Linear Modeling  

    Science Conference Proceedings (OSTI)

    The Florida Area Cumulus Experiment (FACE) was a two-stage program dedicated to assessing the potential of “dynamic seeding” for enhancing convective rainfall in a fixed target area. FACE-1 (1970–76) was an exploratory cloud seeding experiment ...

    J. A. Flueck; W. L. Woodley; A. G. Barnston; T. J. Brown

    1986-04-01T23:59:59.000Z

    82

    Repository Integration Program: RIP performance assessment and strategy evaluation model theory manual and user`s guide  

    SciTech Connect

    This report describes the theory and capabilities of RIP (Repository Integration Program). RIP is a powerful and flexible computational tool for carrying out probabilistic integrated total system performance assessments for geologic repositories. The primary purpose of RIP is to provide a management tool for guiding system design and site characterization. In addition, the performance assessment model (and the process of eliciting model input) can act as a mechanism for integrating the large amount of available information into a meaningful whole (in a sense, allowing one to keep the ``big picture`` and the ultimate aims of the project clearly in focus). Such an integration is useful both for project managers and project scientists. RIP is based on a `` top down`` approach to performance assessment that concentrates on the integration of the entire system, and utilizes relatively high-level descriptive models and parameters. The key point in the application of such a ``top down`` approach is that the simplified models and associated high-level parameters must incorporate an accurate representation of their uncertainty. RIP is designed in a very flexible manner such that details can be readily added to various components of the model without modifying the computer code. Uncertainty is also handled in a very flexible manner, and both parameter and model (process) uncertainty can be explicitly considered. Uncertainty is propagated through the integrated PA model using an enhanced Monte Carlo method. RIP must rely heavily on subjective assessment (expert opinion) for much of its input. The process of eliciting the high-level input parameters required for RIP is critical to its successful application. As a result, in order for any project to successfully apply a tool such as RIP, an enormous amount of communication and cooperation must exist between the data collectors, the process modelers, and the performance. assessment modelers.

    NONE

    1995-11-01T23:59:59.000Z

    83

    Tags | OpenEI Community  

    Open Energy Info (EERE)

    Tags Tags Home > Community OpenEI imported Open Data data Utility Rates developer United States linked open data Legal review Energy data Categorical Exclusions workshop Big Data LOD Town Hall meeting API Green Button BHFS quarterly meeting Solar clean energy web services forum analysis energy permitting utility rate Renewable Energy NREL wiki Datapalooza geothermal DOE Smart Grid Innovation GRR Literature Review NEPA Semantic Mediawiki EDI Wind roadmap current energy ocean energy feedback transmission result formats multicolor Google maps results design FONSI GMREC compound queries maps Performance interface MHK LEDS Tidal building power plant GTO challenge marine energy levelized cost of energy CBS Wave Cost Current facilities management indoor architecture

    84

    Guide to Critical Infrastructure Protection Cyber Vulnerability...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Critical Infrastructure Protection Cyber Vulnerability Assessment Guide to Critical Infrastructure Protection Cyber Vulnerability Assessment This document describes a customized...

    85

    User's Guide for RIVRISK Version 5.0: A Model to Assess Potential Human Health and Ecological Risks from Power Plant and Industrial Facility Releases to Rivers  

    Science Conference Proceedings (OSTI)

    This is a user's guide to EPRI's RIVRISK framework, Version 5.0, which can be used to assess human health and ecological risks associated with industrial and power plant chemical and thermal releases to rivers. The report also documents RIVRISK's theoretical foundation and graphical user interface. Industrial and government staff concerned with chemical and thermal releases will find this report useful.

    2000-11-29T23:59:59.000Z

    86

    Parsing idioms in lexicalized TAGs  

    Science Conference Proceedings (OSTI)

    We show how idioms can be parsed in lexicalized TAGs. We rely on extensive studies of frozen phrases pursued at L.A.D.L. that show that idioms are pervasive in natural language and obey, generally speaking, the same morphological and syntactical patterns ...

    Anne Abeillé; Yves Schabes

    1989-04-01T23:59:59.000Z

    87

    Visible and controllable RFID tags  

    Science Conference Proceedings (OSTI)

    Radio frequency identification (RFID) tags containing privacy-sensitive information are increasingly embedded into personal documents (e.g., passports and driver's licenses). The problem is that people are often unaware of the security and privacy risks ... Keywords: awareness, control, feedback, privacy, rfid, sensors

    Nicolai Marquardt; Alex S. Taylor; Nicolas Villar; Saul Greenberg

    2010-04-01T23:59:59.000Z

    88

    HCI gesture tracking using wearable passive tags  

    E-Print Network (OSTI)

    In this thesis. a wearable system is developed to track hand gestures with passive RFID sensor tags. This system was composed of an ultra-high frequency reader and small, passive, finger-worn tags powered by scavenged RFID ...

    Bainbridge, Rachel M

    2010-01-01T23:59:59.000Z

    89

    OpenTag: Privacy protection for RFID  

    E-Print Network (OSTI)

    Radio frequency identification's use in retail is good for pervasive computing, but raises considerable privacy issues. OpenTag programmable tags address privacy issues while remaining fully compatible with the supply-chain ...

    Holtzman, Henry N.

    90

    Net Zero Energy Military Installations: A Guide to Assessment and Planning  

    Science Conference Proceedings (OSTI)

    The U.S. Department of Defense (DoD) recognizes the strategic importance of energy to its mission, and is working to reduce energy consumption and enhance energy self-sufficiency by drawing on local clean energy sources. A joint initiative formed between DoD and the U.S. Department of Energy (DOE) in 2008 to address military energy use led to a task force to examine the potential for net zero energy military installations, which would produce as much energy on site as they consume in buildings, facilities, and fleet vehicles. This report presents an assessment and planning process to examine military installations for net zero energy potential. Net Zero Energy Installation Assessment (NZEIA) presents a systematic framework to analyze energy projects at installations while balancing other site priorities such as mission, cost, and security.

    Booth, S.; Barnett, J.; Burman, K.; Hambrick, J.; Westby, R.

    2010-08-01T23:59:59.000Z

    91

    Compressing tags to find interesting media groups  

    Science Conference Proceedings (OSTI)

    On photo sharing websites like Flickr and Zooomr, users are offered the possibility to assign tags to their uploaded pictures. Using these tags to find interesting groups of semantically related pictures in the result set of a given query is a problem ... Keywords: compression, tags

    Matthijs van Leeuwen; Francesco Bonchi; Börkur Sigurbjörnsson; Arno Siebes

    2009-11-01T23:59:59.000Z

    92

    Method for designing gas tag compositions  

    DOE Patents (OSTI)

    For use in the manufacture of gas tags such as employed in a nuclear reactor gas tagging failure detection system, a method for designing gas tagging compositions utilizes an analytical approach wherein the final composition of a first canister of tag gas as measured by a mass spectrometer is designated as node No. 1. Lattice locations of tag nodes in multi-dimensional space are then used in calculating the compositions of a node No. 2 and each subsequent node so as to maximize the distance of each node from any combination of tag components which might be indistinguishable from another tag composition in a reactor fuel assembly. Alternatively, the measured compositions of tag gas numbers 1 and 2 may be used to fix the locations of nodes 1 and 2, with the locations of nodes 3-N then calculated for optimum tag gas composition. A single sphere defining the lattice locations of the tag nodes may be used to define approximately 20 tag nodes, while concentric spheres can extend the number of tag nodes to several hundred. 5 figures.

    Gross, K.C.

    1995-04-11T23:59:59.000Z

    93

    Method for designing gas tag compositions  

    DOE Patents (OSTI)

    For use in the manufacture of gas tags such as employed in a nuclear reactor gas tagging failure detection system, a method for designing gas tagging compositions utilizes an analytical approach wherein the final composition of a first canister of tag gas as measured by a mass spectrometer is designated as node #1. Lattice locations of tag nodes in multi-dimensional space are then used in calculating the compositions of a node #2 and each subsequent node so as to maximize the distance of each node from any combination of tag components which might be indistinguishable from another tag composition in a reactor fuel assembly. Alternatively, the measured compositions of tag gas numbers 1 and 2 may be used to fix the locations of nodes 1 and 2, with the locations of nodes 3-N then calculated for optimum tag gas composition. A single sphere defining the lattice locations of the tag nodes may be used to define approximately 20 tag nodes, while concentric spheres can extend the number of tag nodes to several hundred.

    Gross, Kenny C. (1433 Carriage La., Bolingbrook, IL 60440)

    1995-01-01T23:59:59.000Z

    94

    Training considerations for the intracoelomic implantation of electronic tags in fish with a summary of common surgical errors  

    Science Conference Proceedings (OSTI)

    Training is a fundamental part of all scientific and technical disciplines. This is particularly true for all types of surgeons. For surgical procedures, a number of skills are necessary to reduce mistakes. Trainees must learn an extensive yet standardized set of problem-solving and technical skills to handle challenges as they arise. There are currently no guidelines or consistent training methods for those intending to implant electronic tags in fish; this is surprising, considering documented cases of negative consequences of fish surgeries and information from studies having empirically tested fish surgical techniques. Learning how to do fish surgery once is insufficient for ensuring the maintenance or improvement of surgical skill. Assessment of surgical skills is rarely incorporated into training, and is needed. Evaluation provides useful feedback that guides future learning, fosters habits of self-reflection and self-remediation, and promotes access to advanced training. Veterinary professionals should be involved in aspects of training to monitor basic surgical principles. We identified attributes related to knowledge, understanding, and skill that surgeons must demonstrate prior to performing fish surgery including a “hands-on” assessment using live fish. Included is a summary of common problems encountered by fish surgeons. We conclude by presenting core competencies that should be required as well as outlining a 3-day curriculum for training surgeons to conduct intracoelomic implantation of electronic tags. This curriculum could be offered through professional fisheries societies as professional development courses.

    Cooke, Steven J.; Wagner, Glenn N.; Brown, Richard S.; Deters, Katherine A.

    2011-01-01T23:59:59.000Z

    95

    Scalable RFID Security Protocols supporting Tag Ownership Transfer  

    E-Print Network (OSTI)

    server, then the damage would be very serious. · Tag Tracking: if the responses of a tag are linkable be able to resist tag track- ing attacks. If messages from tags are anonymous, then the problem of tag its identifier. Tag tracking is thus partially possible [10], as in the HM scheme. The RFID

    Sheldon, Nathan D.

    96

    Infrared tag and track technique  

    DOE Patents (OSTI)

    A method of covertly tagging an object for later tracking includes providing a material capable of at least one of being applied to the object and being included in the object, which material includes deuterium; and performing at least one of applying the material to the object and including the material in the object in a manner in which in the appearance of the object is not changed, to the naked eye.

    Partin, Judy K. (Idaho Falls, ID); Stone, Mark L. (Idaho Falls, ID); Slater, John (Albuquerque, NM); Davidson, James R. (Idaho Falls, ID)

    2007-12-04T23:59:59.000Z

    97

    Effective Grid Utilization: A Technical Assessment and Application Guide; April 2011 - September 2012  

    DOE Green Energy (OSTI)

    In order to more fully integrate renewable resources, such as wind and solar, into the transmission system, additional capacity must be realized in the short term using the installed transmission capacity that exists today. The U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory Transmission and Grid Integration Group supported this study to assemble the history of regulations and status of transmission technology to expand existing grid capacity. This report compiles data on various transmission technology methods and upgrades for increased capacity utilization of the existing transmission system and transmission corridors. The report discusses the technical merit of each method and explains how the method could be applied within the current regulatory structure to increase existing transmission conductor and/or corridor capacity. The history and current state of alternatives to new construction is presented for regulators, legislators, and other policy makers wrestling with issues surrounding integration of variable generation. Current regulations are assessed for opportunities to change them to promote grid expansion. To support consideration of these alternatives for expanding grid capacity, the report lists relevant rules, standards, and policy changes.

    Balser, S.; Sankar, S.; Miller, R.; Rawlins, A.; Israel, M.; Curry, T.; Mason, T.

    2012-09-01T23:59:59.000Z

    98

    Assessment of water issues associated with enhanced oil recovery: a user's guide  

    SciTech Connect

    This is a user's manual for effectively evaluating water issues associated with enhanced oil recovery (EOR) production. It is designed to provide ready reference and to assist EOR producers, energy planners, and decision-makers in assessing the impacts of water issues related to EOR production. An evaluation is made of EOR water requirements using public available information, data from actual field applications, and information provided by knowledgeable EOR technologists in 14 different major oil companies. Water quantity and quality requirements representing the total water needed from all sources (e.g., aquifers, lakes, etc.) are estimated for individual EOR processes in those states and specific geological locations where these processes will likely play major roles in future petroleum production by the year 2000. A reduction in these quantities can be achieved by reinjecting some or all of the produced water potentially available for recycle (i.e., some is lost in oil and water separation treatment processes) in the recovery method. Data and information for quantity and quality of surface and ground water availability and competing entities by four major user categories are presented on a qualitative and quantitative basis on a state-county basis from monitoring sites nearest existing EOR projects. Information regarding regulatory bodies responsible for the control of water supply and use is presented in tabular form by state only because of the volume and complexity of material. While no major EOR project to date has ever been abandoned because of water supply problems, factors such as competing regional uses for water, drought situations, and scarcity of high quality surface and ground water could be impediments to certain projects in the near future. 6 figures, 22 tables.

    Shields, J.; Kaplan, E.; Royce, B.A.

    1983-04-01T23:59:59.000Z

    99

    Addendum to the User's Guide for RIVRISK Version 5.0: A Model to Assess Potential Human Health and Ecological Risks from Power Plant and Industrial Facility Releases to Rivers  

    Science Conference Proceedings (OSTI)

    This is an addendum to the User's Guide for EPRI's RIVRISK analytic framework, Version 5.0. RIVRISK can be used to assess human health and ecological risks associated with industrial and power plant chemical and thermal releases to rivers. Some minor inconsistencies between the original User's Guide (EPRI Report 1000733) and the model examples were discovered during model applications. This addendum provides modified pages of the User's Guide that correct those inconsistencies. Those planning to use RIVR...

    2001-05-04T23:59:59.000Z

    100

    Style, content and format guide for writing safety analysis documents: Volume 2, Safety assessment reports for DOE non-nuclear facilities  

    SciTech Connect

    The purpose of Volume 2 of this 4-volume style guide is to furnish guidelines on writing and publishing Safety Assessment Reports (SAs) for DOE non-nuclear facilities at Sandia National Laboratories. The scope of Volume 2 encompasses not only the general guidelines for writing and publishing, but also the prescribed topics/appendices contents along with examples from typical SAs for DOE non-nuclear facilities.

    Mahn, J.A.; Silver, R.C.; Balas, Y.; Gilmore, W.

    1995-07-01T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    101

    Radio Frequency Identification Tags - Semi Passive (Battery ...  

    PNNL developed this semi-passive RF Tag for the Army to detect and locate nightvision goggles in a cluttered ... and boxes it is easier to track and ...

    102

    Tag der Chemie Donnerstag, 17. Januar 2008  

    E-Print Network (OSTI)

    Tag der Chemie Donnerstag, 17. Januar 2008 UniversitĂ€t Oldenburg GroĂ?er Hörsaal der Institut fĂŒr Reine und Angewandte Chemie GESELLSCH Ortsverband GESELLSCHAFT DEUTSCHER CHEMIKER Tag der Chemie Donnerstag, 4.November 2010 Veranstalter: Gesellschaft Deutscher Chemiker Ortsverband Oldenburg

    Damm, Werner

    103

    Method and apparatus for manufacturing gas tags  

    DOE Patents (OSTI)

    For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases. 4 figs.

    Gross, K.C.; Laug, M.T.

    1996-12-17T23:59:59.000Z

    104

    Method and apparatus for manufacturing gas tags  

    DOE Patents (OSTI)

    For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases.

    Gross, Kenny C. (Bolingbrook, IL); Laug, Matthew T. (Idaho Falls, ID)

    1996-01-01T23:59:59.000Z

    105

    On The Advantages of Tagged Architecture  

    Science Conference Proceedings (OSTI)

    This paper proposes that all data elements in a computer memory be made to be self-identifying by means of a tag. The paper shows that the advantages of the change from the traditional von Neumann machine to tagged architecture are seen in all software ...

    Edward A. Feustel

    1973-07-01T23:59:59.000Z

    106

    Property:Event/Tagged | Open Energy Information  

    Open Energy Info (EERE)

    Tagged Tagged Jump to: navigation, search Property Name Event/Tagged Property Type String Description Keyword used to associate an event with its corresponding calendars, organizations and event types. More than one tag can be added to each event. Pages using the property "Event/Tagged" Showing 25 pages using this property. (previous 25) (next 25) 1 11th Annual Workshop on Greenhouse Gas Emission Trading + MRV +, GHG Inventory +, CLEAN +, ... 11th Annual Workshop on Greenhouse Gas Emission Trading Day 2 + MRV +, GHG Inventory +, CLEAN +, ... 15th International Business Forum: Low Carbon High Growth - Business Models for a Changing Climate + LEDS +, training +, CLEAN + 18th Africa Partnership Forum + LEDS +, CLEAN +, Training + 2 2012 Bonn Climate Change Conference + CLEAN +, LEDS +, Training +

    107

    Secure Symmetric Authentication for RFID Tags  

    E-Print Network (OSTI)

    cryptographically secure authentication. Starting with a short introduction into common RFID systems with passive tags, we present a motivation why secure authentication with standardized symmetric crypto algorithms for RFID tags is necessary for many applications. We demonstrate vulnerabilities of current RFID systems and explain how application of an authentication mechanism can solve them. Furthermore we explain how authentication protocols work and how they can be included in the RFID protocol standard ISO 18000. By presenting the interim results of ART, we will show that the proposed enhancement is feasible with current RIFD infrastructure and silicon technology used for RFID tags.

    Manfred Aigner; Martin Feldhofer

    2005-01-01T23:59:59.000Z

    108

    Tag gas capsule with magnetic piercing device  

    DOE Patents (OSTI)

    An apparatus for introducing a tag (i.e., identifying) gas into a tubular nuclear fuel element. A sealed capsule containing the tag gas is placed in the plenum in the fuel tube between the fuel and the end cap. A ferromagnetic punch having a penetrating point is slidably mounted in the plenum. By external electro-magnets, the punch may be caused to penetrate a thin rupturable end wall of the capsule and release the tag gas into the fuel element. Preferably the punch is slidably mounted within the capsule, which is in turn loaded as a sealed unit into the fuel element.

    Nelson, Ira V. (Richland, WA)

    1976-06-22T23:59:59.000Z

    109

    Juvenile Radio-Tag Study: Lower Granite Dam, 1985 Annual Report.  

    DOE Green Energy (OSTI)

    The concept of using mass releases of juvenile radio tags represents a new and potentially powerful research tool that could be effectively applied to juvenile salmonid passage problems at dams on the Columbia and Snake Rivers. A system of detector antennas, strategically located, would automatically detect and record individually tagged juvenile salmonids as they pass through the spillway, powerhouse, bypass system, or tailrace areas below the dam. Accurate measurements of spill effectiveness, fish guiding efficiency (FGE), collection efficiency (CE), spillway survival, powerhouse survival, and bypass survival would be possible without handling large numbers of unmarked fish. A prototype juvenile radio-tag system was developed and tested by the National Marine Fisheries Service (NMFS) and Bonneville Power Administration (BPA) at John Day Dam and at Lower Granite Dam. This report summarizes research to: (1) evaluate the effectiveness of the prototype juvenile radio-tag system in a field situation and (2) to test the basic assumptions inherent in using the juvenile radio tag as a research tool.

    Stuehrenberg, Lowell C.

    1986-06-01T23:59:59.000Z

    110

    Power Tagging Technologies | Open Energy Information  

    Open Energy Info (EERE)

    Tagging Technologies Tagging Technologies Jump to: navigation, search Name Power Tagging Technologies Place Superior, Colorado Zip 80027 Product Colorado-based developer of advanced digital signal processing technologies that enable real-time "power tagging" on the grid. Coordinates 41.761495°, -108.967894° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.761495,"lon":-108.967894,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

    111

    PacifiCorp Green Tags RFP  

    NLE Websites -- All DOE Office Websites (Extended Search)

    PacifiCorp Green Tags RFP PacifiCorp Green Tags RFP May 25, 2001 Page 1 PacifiCorp REQUEST FOR PROPOSAL FOR TRADEABLE RENEWABLE CREDITS (GREEN TAGS, as defined herein) AND ENVIRONMENTAL MITIGATION PRODUCTS ISSUE DATE: MAY 25, 2001 DUE DATE: At or before 2 p.m. PDT on Monday, June 11, 2001 CONTACT: Jane DoeRoby Roberts PacifiCorp 825 NE Multnomah Avenue, Suite 62000 Portland, Oregon 97232 503 XXX XXX813 - 5975 voice 503 XXX XXX813 - 6260 fax roby.robjane.doerts@pacificorp.com PacifiCorp Green Tags RFP May 25, 2001 Page 2 TABLE OF CONTENTS Section * REQUEST FOR PROPOSALS 1 * GENERAL PROCEDURES 2 * DEFINITIONS 3 * SCHEDULE 4 * EVALUATION 5 * DETAILED PROPOSAL REQUIREMENTS 6 * CONTENT OF RESPONSE 7 * DISCUSSIONS AND RIGHT TO REJECT PROPOSALS 8 * INCURRING COSTS 9 * DISPOSITION OF PROPOSALS AND OWNERSHIP OF DATA 10

    112

    Information Solutions: Improving Search Results - Meta Tags  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Improving Search Results - Meta Tags Improving Search Results - Meta Tags Definition and Usage Metadata is data (information) about data. The tag provides metadata about the HTML document. Metadata will not be displayed on the page, but will be machine parsable. Meta elements are typically used to specify page description, keywords, author of the document, last modified, and other metadata. The metadata can be used by browsers (how to display content or reload page), search engines (keywords), or other web services. Tips and Notes Note: tags always goes inside the element. Note: Metadata is always passed as name/value pairs. Note: The content attribute MUST be defined if the name or the http-equiv attribute is defined. if none of these are defined, the content attribute

    113

    Tag: uranium | Y-12 National Security Complex  

    NLE Websites -- All DOE Office Websites (Extended Search)

    uranium Tag: uranium Displaying 1 - 10 of 23... Category: News The Nation's Expert in All Things Uranium Y-12 serves the nation and the world as a center of excellence for uranium...

    114

    tagging API | OpenEI Community  

    Open Energy Info (EERE)

    tagging API Home Graham7781's picture Submitted by Graham7781(1982) Super contributor 15 February, 2013 - 16:25 Reegle mentions OpenEI in video on new Content Pool API data energy...

    115

    Re-ranking algorithms for name tagging  

    Science Conference Proceedings (OSTI)

    Integrating information from different stages of an NLP processing pipeline can yield significant error reduction. We demonstrate how re-ranking can improve name tagging in a Chinese information extraction system by incorporating information from relation ...

    Heng Ji; Cynthia Rudin; Ralph Grishman

    2006-06-01T23:59:59.000Z

    116

    User Interface Program for secure electronic tags  

    SciTech Connect

    This report summarizes and documents the efforts of Argonne National Laboratory (ANL) in developing a secure tag communication user interface program comprising a tag monitor and a communication tool. This program can perform the same functions as the software that was developed at the Lawrence Livermore National Laboratory (LLNL), but it is enhanced with a user-friendly screen. It represents the first step in updating the TRANSCOM Tracking System (TRANSCOM) by incorporating a tag communication screen menu into the main menu of the TRANSCOM user program. A working version of TRANSCOM, enhanced with ANL secure-tag graphics, will strongly support the Department of Energy Warhead Dismantlement/Special Nuclear Materials Control initiatives. It will allow commercial satellite tracking of the movements and operational activities of treaty-limited items and transportation vehicles throughout Europe and the former USSR, as well as the continental US.

    Cai, Y.; Koehl, E.R.; Carlson, R.D.; Raptis, A.C.

    1995-05-01T23:59:59.000Z

    117

    Solid tags for identifying failed reactor components  

    DOE Patents (OSTI)

    A solid tag material which generates stable detectable, identifiable, and measurable isotopic gases on exposure to a neutron flux to be placed in a nuclear reactor component, particularly a fuel element, in order to identify the reactor component in event of its failure. Several tag materials consisting of salts which generate a multiplicity of gaseous isotopes in predetermined ratios are used to identify different reactor components.

    Bunch, Wilbur L. (Richland, WA); Schenter, Robert E. (Richland, WA)

    1987-01-01T23:59:59.000Z

    118

    International Energy Agency Implementing Agreements and Annexes: A Guide for Building Technologies Program Managers  

    E-Print Network (OSTI)

    protocol and Energy Assessment Guide Develop a database of “protocol and Energy Assessment Guide Develop a database of “protocol and Energy Assessment Guide Develop  a database 

    Evans, Meredydd

    2008-01-01T23:59:59.000Z

    119

    Annual Coded-Wire Tag Program : Washington : Missing Production Groups Annual Report for 2000.  

    DOE Green Energy (OSTI)

    The Bonneville Power Administration (BPA) funds the 'Annual Coded-wire Tag Program - Missing Production Groups for Columbia River Hatcheries' project. The Washington Department of Fish and Wildlife (WDFW), Oregon Department of Fish and Wildlife (ODFW) and the United States Fish and Wildlife Service (USFWS) all operate salmon and steelhead rearing programs in the Columbia River basin. The intent of the funding is to coded-wire tag at least one production group of each species at each Columbia Basin hatchery to provide a holistic assessment of survival and catch distribution over time and to meet various measures of the Northwest Power Planning Council's (NWPPC) Fish and Wildlife Program. The WDFW project has three main objectives: (1) coded-wire tag at least one production group of each species at each Columbia Basin hatchery to enable evaluation of survival and catch distribution over time, (2) recover coded-wire tags from the snouts of fish tagged under objective 1 and estimate survival, contribution, and stray rates for each group, and (3) report the findings under objective 2 for all broods of chinook, and coho released from WDFW Columbia Basin hatcheries. Objective 1 for FY-00 was met with few modifications to the original FY-00 proposal. Under Objective 2, snouts containing coded-wire tags that were recovered during FY-00 were decoded. Under Objective 3, this report summarizes available recovery information through 2000 and includes detailed information for brood years 1989 to 1994 for chinook and 1995 to 1997 for coho.

    Mills, Robin D.

    2002-02-01T23:59:59.000Z

    120

    A brief examination of optical tagging technologies.  

    SciTech Connect

    Presented within this report are the results of a brief examination of optical tagging technologies funded by the Laboratory Directed Research and Development (LDRD) program at Sandia National Laboratories. The work was performed during the summer months of 2002 with total funding of $65k. The intent of the project was to briefly examine a broad range of approaches to optical tagging concentrating on the wavelength range between ultraviolet (UV) and the short wavelength infrared (SWIR, {lambda} < 2{micro}m). Tagging approaches considered include such things as simple combinations of reflective and absorptive materials closely spaced in wavelength to give a high contrast over a short range of wavelengths, rare-earth oxides in transparent binders to produce a narrow absorption line hyperspectral tag, and fluorescing materials such as phosphors, dies and chemically precipitated particles. One technical approach examined in slightly greater detail was the use of fluorescing nano particles of metals and semiconductor materials. The idea was to embed such nano particles in an oily film or transparent paint binder. When pumped with a SWIR laser such as that produced by laser diodes at {lambda}=1.54{micro}m, the particles would fluoresce at slightly longer wavelengths, thereby giving a unique signal. While it is believed that optical tags are important for military, intelligence and even law enforcement applications, as a business area, tags do not appear to represent a high on return investment. Other government agencies frequently shop for existing or mature tag technologies but rarely are interested enough to pay for development of an untried technical approach. It was hoped that through a relatively small investment of laboratory R&D funds, enough technologies could be identified that a potential customers requirements could be met with a minimum of additional development work. Only time will tell if this proves to be correct.

    Ackermann, Mark R.; Cahill, Paul A. (Aspecular Optics, Dayton, OH); Drummond, Timothy J.; Wilcoxon, Jess Patrick

    2003-07-01T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    122

    Fish Tagging Forum Draft Compilation of Tagging Data Collection and Management  

    E-Print Network (OSTI)

    " from you. It is understood that the data management system associated with F&W program is very, maintenance, and/or management of databases that are designed to store data collected in the field from oneFish Tagging Forum Draft Compilation of Tagging Data Collection and Management 2012_11_12 v0

    123

    FTCP Guiding Documents | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Guiding Documents Guiding Documents FTCP Guiding Documents Key FTCP Directives and Guidance DOE Order 426.1 Chg 1, Federal Technical Capability DOE Order 360.1C, Federal Employee Training DOE Guide 226.1-2, Federal Line Management Oversight of Department of Energy Nuclear Facilities FTCP Assessment Guidance and Criteria, 1998 FTCP and TQP Assessment CRADs, 2012 Qualification Standards and Related Information Functional Area Qualification Standards - TEMPLATE - FAQS Training Course Evaluation Guide - Review Process for Technical Standards FAQS Qualification Cards FAQS Gap Analysis Qualification Cards FAQS Reference Guides FAQS Job Task Analyses - Job Task Analyses Form Qualifying Official Training Approaches Sponsors & Recognized Experts for FAQS HFE Supplemental Competencies

    124

    Making tuple spaces physical with RFID tags  

    Science Conference Proceedings (OSTI)

    In this paper, we describe the design and implementation of a tuple-based distributed memory realized with the use of RFID technology. The key idea - rooted in a more general scenario of pervasive and mobile computing - is that our everyday environments ... Keywords: RFID tags, pervasive computing, tuple-based coordination

    Marco Mamei; Renzo Quaglieri; Franco Zambonelli

    2006-04-01T23:59:59.000Z

    125

    Measurement Protocols for Optimized Fuel Assembly Tags  

    Science Conference Proceedings (OSTI)

    This report describes the measurement protocols for optimized tags that can be applied to standard fuel assemblies used in light water reactors. This report describes work performed by the authors at Pacific Northwest National Laboratory for NA-22 as part of research to identify specific signatures that can be developed to support counter-proliferation technologies.

    Gerlach, David C.; Mitchell, Mark R.; Reid, Bruce D.; Gesh, Christopher J.; Hurley, David E.

    2008-11-01T23:59:59.000Z

    126

    The DataTAG transatlantic testbed  

    Science Conference Proceedings (OSTI)

    Wide area network testbeds allow researchers and engineers to test out new equipment, protocols and services in real-life situations, without jeopardizing the stability and reliability of production networks. The Data TransAtlantic Grid (DataTAG) testbed, ... Keywords: Gigabit wide area networks, Grid networking, Testbed

    O. Martin; J. P. Martin-Flatin; E. Martelli; P. Moroni; H. Newman; S. Ravot; D. Nae

    2005-04-01T23:59:59.000Z

    127

    Total System Performance Assessment Code (TOSPAC); Volume 2, User`s guide: Yucca Mountain Site Characterization Project  

    Science Conference Proceedings (OSTI)

    TOSPAC is a computer program that calculates partially saturated groundwater flow with the transport of water-soluble contaminants. TOSPAC Version 1 is restricted to calculations involving one-dimensional, vertical columns of one or more media. TOSPAC was developed to help answer questions surrounding the burial of toxic wastes in arid regions. Burial of wastes in arid regions is attractive because of generally low population densities and little groundwater flow, in the unsaturated zone, to disturb the waste. TOSPAC helps to quantify groundwater flow and the spread of contamination, offering an idea of what could happen in the distant future. Figure 1.1 illustrates the problem TOSPAC was designed to investigate. For groundwater flow, TOSPAC can provide saturations, velocities, and and travel tunes for water in the rock matrix or the fractures in the unsaturated zone. TOSPAC can determine how hydrologic conditions vary when the rate of infiltration changes. For contaminant transport, TOSPAC can compute how much of a contaminant is dissolved in the water and how it is distributed. TOSPAC can determine how fast the solute is moving and the shape of the concentration front. And TOSPAC can be used to investigate how much of the contaminant remains in the inventory of a repository, how much is adsorbed onto the soil or rock matrix, and how much reaches the water table. Effective use of TOSPAC requires knowledge in a number of diverse disciplines, including real groundwater flow and transport, the mathematical models of groundwater flow and transport, real-world data required for the models, and the numerical solution of differential equations. Equally important is a realization of the limitations intrinsic to a computer model of complex physical phenomena. This User`s Guide not only describes the mechanics of executing TOSPAC on a computer, but also examines these other topics.

    Gauthier, J.H.; Dudley, A.L; Skinner, L.H. [Spectra Research Inst., Albuquerque, NM (United States); Wilson, M.L.; Peters, R.R. [Sandia National Labs., Albuquerque, NM (United States)

    1992-07-01T23:59:59.000Z

    128

    Unveiling the Implementation Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Oak Ridge National Laboratory www.ornl.gov Oak Ridge National Laboratory www.ornl.gov Unveiling the Implementation Guide October 11, 2011 Michaela Martin Program Manager Residential, Commercial, and Industrial Energy Efficiency Oak Ridge National Laboratory 2 | Oak Ridge National Laboratory www.ornl.gov Guiding Principles for Successfully Implementing Industrial Energy Assessment Recommendations * New resource for industry * Identifies key principles and actions that lead to successful implementation of energy assessment recommendations * Connects readers with a variety of trusted resources * Simple tools for supporting energy management programs and continuous energy performance improvement efforts * Available in hard copy and on the web Implementation Guide Overview 3 | Oak Ridge National Laboratory www.ornl.gov

    129

    Joint Chinese word segmentation, POS tagging and parsing  

    Science Conference Proceedings (OSTI)

    In this paper, we propose a novel decoding algorithm for discriminative joint Chinese word segmentation, part-of-speech (POS) tagging, and parsing. Previous work often used a pipeline method -- Chinese word segmentation followed by POS tagging and parsing, ...

    Xian Qian; Yang Liu

    2012-07-01T23:59:59.000Z

    130

    Description of BEFs Green Tag Product  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Description of BEF's Green Tag Product 1 February 22, 2001 In a green tag sale, the power from the new renewable energy facility is not physically delivered to the customer, but...

    131

    Low-cost electromagnetic tagging : design and implementation  

    E-Print Network (OSTI)

    Several implementations of chipless RFID (Radio Frequency Identification) tags are presented and discussed as low-cost alternatives to chip-based RFID tags and sensors. An overview of present-day near-field electromagnetic ...

    Fletcher, Richard R. (Richard Ribon)

    2002-01-01T23:59:59.000Z

    132

    OpenTag : privacy control methods in RFID  

    E-Print Network (OSTI)

    The work documented in this thesis is part of the OpenTag project, which has the goal of designing and developing a flexible and more powerful RFID system to meet the needs of the approaching ubiquitous tagging of everyday ...

    Shen, Daniel Z

    2006-01-01T23:59:59.000Z

    133

    Seismic Fragility Application Guide  

    Science Conference Proceedings (OSTI)

    The "Seismic Fragility Applications Guide" provides utilities with in-depth guidelines for performing fragility analysis as part of a seismic probabilistic risk assessment (SPRA). These cost-effective and practical procedures and the resulting SPRA can support risk-informed/performance-based (RI/PB) applications. To download a pdf file of the product description for this report, click here.

    2002-12-18T23:59:59.000Z

    134

    Effective Tag Set Selection in Chinese Word Segmentation  

    E-Print Network (OSTI)

    Effective Tag Set Selection in Chinese Word Segmentation via Conditional Random Field Modeling Hai that we consider both feature template selection and tag set selection, instead of feature template as different tag sets are selected. Based on the proposed method, our system gives the state

    135

    Minimalist cryptography for low-cost RFID tags (extended abstract)  

    Science Conference Proceedings (OSTI)

    A radio-frequency identification (RFID) tag is a small, inexpensive microchip that emits an identifier in response to a query from a nearby reader. The price of these tags promises to drop to the range of $0.05 per unit in the next several years, offering ... Keywords: RFID tags, authentication, privacy, pseudonyms

    Ari Juels

    2004-09-01T23:59:59.000Z

    136

    Hawaii Energy Strategy: Program guide. [Contains special sections on analytical energy forecasting, renewable energy resource assessment, demand-side energy management, energy vulnerability assessment, and energy strategy integration  

    SciTech Connect

    The Hawaii Energy Strategy program, or HES, is a set of seven projects which will produce an integrated energy strategy for the State of Hawaii. It will include a comprehensive energy vulnerability assessment with recommended courses of action to decrease Hawaii's energy vulnerability and to better prepare for an effective response to any energy emergency or supply disruption. The seven projects are designed to increase understanding of Hawaii's energy situation and to produce recommendations to achieve the State energy objectives of: Dependable, efficient, and economical state-wide energy systems capable of supporting the needs of the people, and increased energy self-sufficiency. The seven projects under the Hawaii Energy Strategy program include: Project 1: Develop Analytical Energy Forecasting Model for the State of Hawaii. Project 2: Fossil Energy Review and Analysis. Project 3: Renewable Energy Resource Assessment and Development Program. Project 4: Demand-Side Management Program. Project 5: Transportation Energy Strategy. Project 6: Energy Vulnerability Assessment Report and Contingency Planning. Project 7: Energy Strategy Integration and Evaluation System.

    1992-09-01T23:59:59.000Z

    137

    Acquisition Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    _____Chapter 15.4-4 (July 2010) _____Chapter 15.4-4 (July 2010) GENERAL GUIDE FOR TECHNICAL ANALYSIS OF COST PROPOSALS FOR ACQUISITION CONTRACTS Acquisition Guide _____________________________________________________________ _______________________________________________________Chapter 15.4-4 (July 2010) TABLE OF CONTENT CHAPTER 1 - INTRODUCTION KEY CONCEPTS ........................................................................................1 LIST OF ACRONYMS...............................................................................1 RELATIONSHIP OF TECHNICAL ANALYSIS TO COST ANALYSIS ..................................2 RESPONSIBILITIES IN EVALUATING CONTRACTOR PROPOSALS ..................................2

    138

    Technology Readiness Assessment (TRA)/Technology Maturation Plan...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    (TRA)Technology Maturation Plan (TMP) Process Guide Technology Readiness Assessment (TRA)Technology Maturation Plan (TMP) Process Guide This document is a guide for those...

    139

    Maintenance Guide for DOE Low-Level Waste Disposal Facility  

    Energy.gov (U.S. Department of Energy (DOE))

    Maintenance Guide for U.S. Department of Energy Low-Level Waste Disposal  Facility Performance Assessments and Composite Analyses

    140

    RFID tags: Positioning principles and localization techniques  

    E-Print Network (OSTI)

    Abstract—RFID is an automatic identification technology that enables tracking of people and objects. Both identity and location are generally key information for indoor services. An obvious and interesting method to obtain these two types of data is to localize RFID tags attached to devices or objects or carried by people. However, signals in indoor environments are generally harshly impaired and tags have very limited capabilities which pose many challenges for positioning them. In this work, we propose a classification and survey the current state-of-art of RFID localization by first presenting this technology and positioning principles. Then, we explain and classify RFID localization techniques. Finally, we discuss future trends in this domain. Index Terms—RFID, localization, positioning algorithm. I.

    Mathieu Bouet; Aldri L. Dos Santos

    2008-01-01T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    141

    Selected Isotopes for Optimized Fuel Assembly Tags  

    SciTech Connect

    In support of our ongoing signatures project we present information on 3 isotopes selected for possible application in optimized tags that could be applied to fuel assemblies to provide an objective measure of burnup. 1. Important factors for an optimized tag are compatibility with the reactor environment (corrosion resistance), low radioactive activation, at least 2 stable isotopes, moderate neutron absorption cross-section, which gives significant changes in isotope ratios over typical fuel assembly irradiation levels, and ease of measurement in the SIMS machine 2. From the candidate isotopes presented in the 3rd FY 08 Quarterly Report, the most promising appear to be Titanium, Hafnium, and Platinum. The other candidate isotopes (Iron, Tungsten, exhibited inadequate corrosion resistance and/or had neutron capture cross-sections either too high or too low for the burnup range of interest.

    Gerlach, David C.; Mitchell, Mark R.; Reid, Bruce D.; Gesh, Christopher J.; Hurley, David E.

    2008-10-01T23:59:59.000Z

    142

    Tag der Chemie Technische Universitt Berlin  

    E-Print Network (OSTI)

    Tag der Chemie Technische UniversitÀt Berlin www.tdc-bb.de 27. 28.06.2012 Lichthof der Technischen Wirkung ­ Mit ,,Nichts" zum Chemie-Prof. 13.45 Uhr PostervortrÀge 14.45 Uhr Kaffeepause / Postersession 15.20 Uhr PrÀsentationen DexLeChem DexLeChem ­ ein universitÀres Spin-Off des Instituts der Chemie der

    Nabben, Reinhard

    143

    DOE Research and Development Accomplishments Tag Cloud  

    Office of Scientific and Technical Information (OSTI)

    Database Tag Cloud Database Tag Cloud This tag cloud is a specific type of weighted list that provides a quick look at the content of the DOE R&D Accomplishments database. It can be easily browsed because terms are in alphabetical order. With this tag cloud, there is a direct correlation between font size and quantity. The more times a term appears in the bibliographic citations, the larger the font size. This tag cloud is also interactive. Clicking on a term will activate a search for that term. Search results will then be received. absorption Accelerator Accelerators Acid Acids AEC air Alpha Analysis Angular Applications Applied Argonne Aspects atmospheric Atom Atomic atoms Background Basic Batteries Beam Beams Beta Biological Biology BNL Brookhaven Calculations Calvin Capture carbon Cells CH Change changes Chemical Chemistry CHLORINE climate Coal Collisions complex Complexes Compounds computed Computerized conditions Conservation Conversion Cosmic Cosmology Cross Crystal current cycle data Decay density design Detection detectors development Devices Diagnostic Diffraction Dioxide Discovery distribution DNA Effect Effects Efficiency Electric electricity Electromagnetic Electron Electrons Element elementary elements Emission Energy Environmental Equations even Exchange Experiment Experimental experiments Fermi field fields First Fission Fossil Free fuel fuels Fusion Future Gamma Gas Genome global greenhouse group Hadron Health heat Heating heavy high Historical history Human Hydrocarbons Hydrogen Imaging impacts important Information Institute Interaction Interactions International Invariance ion Ions Isotope Isotopes Kinetics large laser Lawrence LBL LBNL lepton level light Linear Lithium Livermore living LLNL long low Magnetic Mass material Materials mathematics Matter Measurement measurements Mechanics mechanism medical Medicine Mesons Metabolism Method methods Model Models Molecular Molecules momentum mu Nambu Neutral Neutrino Neutrinos Neutron neutrons Nuclear Nuclei Nucleon Odd Organic ORNL Oxides oxygen Particle Particles path PET Photosynthesis physical Physics pi Plants Plasma Plutonium Policy Polymers Positron Power problem processes production program Programs progress Properties Proton Protons Quantum Quark Radiation Radioactive Radioisotopes range Ratio ray Reaction Reactions Reactor Reactors Renewable report Research resolution Resonance results Review RTG scattering science Sciences scientific Seaborg Separation Solar Source Sources Space Spectra Spectroscopy spectrum Spin Stability state States storage Strong Structure Studies study supernovae symmetry Symposium Synthesis system Systems Tau technical Techniques technologies Technology Teller Temperature theoretical Theories Theory Therapy Thermal Thermoelectric Thin Time Tomography Top Tracer Transfer Transport type types Upton Uranium uses Velocity Water Weak Wigner yields

    144

    Acquisition Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Chapter 15.4-4 (December 2010) Chapter 15.4-4 (December 2010) GENERAL GUIDE FOR TECHNICAL ANALYSIS OF COST PROPOSALS FOR ACQUISITION CONTRACTS Acquisition Guide _____________________________________________________________ __________________________________________________Chapter 15.4-4 (November 2010) TABLE OF CONTENT CHAPTER 1 - INTRODUCTION KEY CONCEPTS ........................................................................................1 LIST OF ACRONYMS...............................................................................1 RELATIONSHIP OF TECHNICAL ANALYSIS TO COST ANALYSIS ..................................2 RESPONSIBILITIES IN EVALUATING CONTRACTOR PROPOSALS ..................................2 CHAPTER 2 - PREPARING TO EVALUATE A PROPOSAL

    145

    Energy storage for the electricity grid : benefits and market potential assessment guide : a study for the DOE Energy Storage Systems Program.  

    DOE Green Energy (OSTI)

    This guide describes a high-level, technology-neutral framework for assessing potential benefits from and economic market potential for energy storage used for electric-utility-related applications. The overarching theme addressed is the concept of combining applications/benefits into attractive value propositions that include use of energy storage, possibly including distributed and/or modular systems. Other topics addressed include: high-level estimates of application-specific lifecycle benefit (10 years) in $/kW and maximum market potential (10 years) in MW. Combined, these criteria indicate the economic potential (in $Millions) for a given energy storage application/benefit. The benefits and value propositions characterized provide an important indication of storage system cost targets for system and subsystem developers, vendors, and prospective users. Maximum market potential estimates provide developers, vendors, and energy policymakers with an indication of the upper bound of the potential demand for storage. The combination of the value of an individual benefit (in $/kW) and the corresponding maximum market potential estimate (in MW) indicates the possible impact that storage could have on the U.S. economy. The intended audience for this document includes persons or organizations needing a framework for making first-cut or high-level estimates of benefits for a specific storage project and/or those seeking a high-level estimate of viable price points and/or maximum market potential for their products. Thus, the intended audience includes: electric utility planners, electricity end users, non-utility electric energy and electric services providers, electric utility regulators and policymakers, intermittent renewables advocates and developers, Smart Grid advocates and developers, storage technology and project developers, and energy storage advocates.

    Eyer, James M. (Distributed Utility Associates, Inc., Livermore, CA); Corey, Garth P. (KTech Corporation, Albuquerque, NM)

    2010-02-01T23:59:59.000Z

    146

    Gift tag drive benefits local children and seniors  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Gift Tag Drive Gift Tag Drive Community Connections: Our link to Northern New Mexico Communities Latest Issue:Dec. 2013 - Jan. 2014 All Issues » submit Gift tag drive benefits local children and seniors Each year, Lab employees and contractors work to make the holidays brighter for local children and seniors through its Holiday Gift Tag drive. January 1, 2013 dummy image Read our archives Contacts Editor Linda Anderman Email Community Programs Office Kurt Steinhaus Email Individuals identified through regional nonprofit social-welfare organizations indicate what presents might make their holidays happier, and that information is transcribed onto gift tags. Each year, Lab employees and contractors work to make the holidays brighter for local children and seniors through its Holiday Gift Tag drive.

    147

    Method for nonlinear optimization for gas tagging and other systems  

    DOE Patents (OSTI)

    A method and system are disclosed for providing nuclear fuel rods with a configuration of isotopic gas tags. The method includes selecting a true location of a first gas tag node, selecting initial locations for the remaining n-1 nodes using target gas tag compositions, generating a set of random gene pools with L nodes, applying a Hopfield network for computing on energy, or cost, for each of the L gene pools and using selected constraints to establish minimum energy states to identify optimal gas tag nodes with each energy compared to a convergence threshold and then upon identifying the gas tag node continuing this procedure until establishing the next gas tag node until all remaining n nodes have been established. 6 figs.

    Chen, T.; Gross, K.C.; Wegerich, S.

    1998-01-06T23:59:59.000Z

    148

    Method for nonlinear optimization for gas tagging and other systems  

    DOE Patents (OSTI)

    A method and system for providing nuclear fuel rods with a configuration of isotopic gas tags. The method includes selecting a true location of a first gas tag node, selecting initial locations for the remaining n-1 nodes using target gas tag compositions, generating a set of random gene pools with L nodes, applying a Hopfield network for computing on energy, or cost, for each of the L gene pools and using selected constraints to establish minimum energy states to identify optimal gas tag nodes with each energy compared to a convergence threshold and then upon identifying the gas tag node continuing this procedure until establishing the next gas tag node until all remaining n nodes have been established.

    Chen, Ting (Chicago, IL); Gross, Kenny C. (Bolingbrook, IL); Wegerich, Stephan (Glendale Heights, IL)

    1998-01-01T23:59:59.000Z

    149

    User Guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Guide Guide User Guide Print 1. Apply for Beam Time Submit a new proposal or a Beam Time Request (BTR) using an existing active proposal. 2. Establish a User Agreement Your institute must have a signed agreement with Berkeley Lab before you may do work at the ALS. 3. Complete Experiment Safety Documentation and Review Safety for Users Safety documentation must be completed and reviewed before your beam time. Experiments involving any biological material or radioactive material require more review steps so please allow several weeks for these. 4. Register with the User Office New and returning users need to register with the User Office TWO weeks before arriving at the ALS. Users arriving out of regular office hours must either have a valid Berkeley Lab ID badge, or have completed registration to be granted access to the ALS.

    150

    Annual Coded Wire Tag Program; Washington Missing Production Groups, 1994 Annual Report.  

    DOE Green Energy (OSTI)

    The Bonneville Power Administration (BPA) funds the ``Annual Coded Wire Tag Program -- Missing Production Groups for Columbia River Hatcheries`` project. The Washington Department of Fish and Wildlife (WDFW) [formerly the Washington Department of Fisheries (WDF) and the Washington Department of Wildlife (WDW)], Oregon Department of Fish and Wildlife (ODFW) and the United States Fish and Wildlife Service (USFWS) all operate salmon and steelhead rearing programs in the Columbia River basin. The intent of the funding is to coded-wire tag at least one production group of each species at each Columbia Basin hatchery to provide a holistic assessment of survival and catch distribution over time. Data generated by this project contributes to WDFW`s obligations for representative tagging under the Endangered. Species Act (ESA) permit for operating Columbia Basin facilities. WDFW facilities operating outside the Snake River basin are required to have a Section 10, ``Incidental Take`` permit. Consistent with special conditions within this permit, WDFW has now reached it`s objective to tag representative groups from all WDFW Columbia Basin releases.

    Fuss, Howard J.; Ashbrook, Charmane; Doty, Daniel (Washington Department of Fish and Wildlife, Olympia, WA)

    1994-12-01T23:59:59.000Z

    151

    A Hybrid Software Programmable Tag - Oak Ridge National Laboratory ...  

    A Hybrid Software Programmable Tag Note: The technology described above is an early stage opportunity. Licensing rights to this intellectual property may

    152

    Micromagnets Show Promise as Colorful 'Smart Tags' for MRI  

    Science Conference Proceedings (OSTI)

    ... smart tag” capability to magnetic resonance imaging for medical diagnosis and research. The image on the right shows light scattering from grids of ...

    2011-05-03T23:59:59.000Z

    153

    HCI Gesture Tracking Using Wearable Passive Tags  

    E-Print Network (OSTI)

    In this thesis, a wearable system is developed to track hand gestures with passive RFID sensor tags. This system was composed of an ultra-high frequency reader and small, passive, finger-worn tags powered by scavenged RFID energy equipped with a variety of sensors that could be used to detect gestures. The primary physical goals of the system were to be comfortable and wearable without interfering with other everyday activities. The computational goals of the system were to track particular hand movements, which could be used to control a wearable computer or aid in interaction with ubiquitous and other wearable devices. As a user is walking through their environments, we aim to avoid the need for pulling out an interface with keyboard, keypad, or touch screen, and also avoid bulky hand-held interfaces, allowing the user to specify input with their fingers without taking their eyes and attention off their immediate focus. This thesis first introduces our hardware, then gives some

    Rachel M. Bainbridge; Joseph A. Paradiso

    2010-01-01T23:59:59.000Z

    154

    JM to revise DOE G 414.1-1B, Management and Independent Assessments Guide for Use with 10 CFR, Part 830, Subpart A, and DOE O 414.1C, Quality Assurance; DOE M 450.4-1, Integrated Safety Management System Manual; and DOE O 226.1A  

    Directives, Delegations, and Requirements

    Management and Independent Assessments Guide for Use with 10 CFR, Part 830, Subpart A, and DOE O 414.1C, Quality Assurance; DOE M 450.4-1, Integrated Safety ...

    2013-04-18T23:59:59.000Z

    155

    The (In)Security of Drug Testing - Vulnerability Assessment Team...  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Selected Papers > The (In)Security of Drug Testing VAT Projects Introducing the VAT Adversarial Vulnerability Assessments Safety Tags & Product Counterfeiting Election Security...

    156

    The Influence of Tag Presence on the Mortality of Juvenile Chinook Salmon Exposed to Simulated Hydroturbine Passage: Implications for Survival Estimates and Management of Hydroelectric Facilities  

    Science Conference Proceedings (OSTI)

    Each year, millions of fish have telemetry tags (acoustic, radio, inductive) surgically implanted to assess their passage and survival through hydropower facilities. One route of passage of particular concern is through hydro turbines, in which fish may be exposed to a range of potential injuries, including barotraumas from rapid decompression. The change in pressure from acclimation to exposure (nadir) has been found to be an important factor in predicting the likelihood of mortality and injury for juvenile Chinook salmon undergoing rapid decompression associated with simulated turbine passage. The presence of telemetry tags has also been shown to influence the likelihood of injury and mortality for juvenile Chinook salmon. This research investigated the likelihood of mortality and injury for juvenile Chinook salmon carrying telemetry tags and exposed to a range of simulated turbine passage. Several factors were examined as predictors of mortal injury for fish undergoing rapid decompression, and the ratio of pressure change and tag burden were determined to be the most predictive factors. As the ratio of pressure change and tag burden increase, the likelihood of mortal injury also increases. The results of this study suggest that previous survival estimates of juvenile Chinook salmon passing through hydro turbines may have been biased due to the presence of telemetry tags, and this has direct implications to the management of hydroelectric facilities. Realistic examples indicate how the bias in turbine passage survival estimates could be 20% or higher, depending on the mass of the implanted tags and the ratio of acclimation to exposure pressures. Bias would increase as the tag burden and pressure ratio increase, and have direct implications on survival estimates. It is recommended that future survival studies use the smallest telemetry tags possible to minimize the potential bias that may be associated with carrying the tag.

    Carlson, Thomas J.; Brown, Richard S.; Stephenson, John R.; Pflugrath, Brett D.; Colotelo, Alison HA; Gingerich, Andrew J.; Benjamin, Piper L.; Langeslay, Mike; Ahmann, Martin L.; Johnson, Robert L.; Skalski, John R.; Seaburg, Adam; Townsend, Richard L.

    2012-05-01T23:59:59.000Z

    157

    Gas tagging and cover gas combination for nuclear reactor  

    DOE Patents (OSTI)

    The invention discloses the use of stable isotopes of neon and argon, that are grouped in preselected different ratios one to the other and are then sealed as tags in different cladded nuclear fuel elements to be used in a liquid metal fast breeder reactor. Failure of the cladding of any fuel element allows fission gases generated in the reaction and these tag isotopes to escape and to combine with the cover gas held in the reactor over the fuel elements. The isotopes specifically are Ne.sup.20, Ne.sup.21 and Ne.sup.22 of neon and Ar.sup.36, Ar.sup.38 and Ar.sup.40 of argon, and the cover gas is helium. Serially connected cryogenically operated charcoal beds are used to clean the cover gas and to separate out the tags. The first or cover gas cleanup bed is held between approximately 0.degree. and -25.degree. C. operable to remove the fission gases from the cover gas and tags and the second or tag recovery system bed is held between approximately -170.degree. and -185.degree. C. operable to isolate the tags from the cover gas. Spectrometric analysis further is used to identify the specific tags that are recovered, and thus the specific leaking fuel element. By cataloging the fuel element tags to the location of the fuel elements in the reactor, the location of the leaking fuel element can then be specifically determined.

    Gross, Kenny C. (Lemont, IL); Laug, Matthew T. (Idaho Falls, ID)

    1985-01-01T23:59:59.000Z

    158

    Low-order tensor decompositions for social tagging recommendation  

    Science Conference Proceedings (OSTI)

    Social tagging recommendation is an urgent and useful enabling technology for Web 2.0. In this paper, we present a systematic study of low-order tensor decomposition approach that are specifically targeted at the very sparse data problem in tagging recommendation ... Keywords: graph mining, recommendation system, social network

    Yuanzhe Cai; Miao Zhang; Dijun Luo; Chris Ding; Sharma Chakravarthy

    2011-02-01T23:59:59.000Z

    159

    InkTag: secure applications on an untrusted operating system  

    Science Conference Proceedings (OSTI)

    InkTag is a virtualization-based architecture that gives strong safety guarantees to high-assurance processes even in the presence of a malicious operating system. InkTag advances the state of the art in untrusted operating systems in both the design ... Keywords: application protection, paraverification, virtualization-based security

    Owen S. Hofmann; Sangman Kim; Alan M. Dunn; Michael Z. Lee; Emmett Witchel

    2013-04-01T23:59:59.000Z

    160

    Gene identification in Phytophthora capsici through expressed sequence tags  

    Science Conference Proceedings (OSTI)

    Expressed Sequence Tags (ESTs) are a rich source of information for gene discovery. In this paper, we describe the annotation of ESTs of Phytophthora capsici whose complete genome is not yet available. P. capsici is an Oomycete plant pathogen ... Keywords: Phytophthora capsici, expressed sequence tags, gene functional annotation

    N. Reena; A. Chandrasekar; A. Riju; P. L. Nima; S. J. Eapen; M. Anandaraj

    2010-02-01T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    161

    Tag: ES&amp;H  

    NLE Websites -- All DOE Office Websites (Extended Search)

    6/all en Red light, green light 6/all en Red light, green light http://www.y12.doe.gov/employees-retirees/y-12-times/red-light-green-light

    Even in the face of a furlough, we were thorough, professional and kept an eye on safety and security.
  • tag" title="Red light, green light">Read more about Red light, green light

  • 162

    Tag: partnerships | Y-12 National Security Complex  

    NLE Websites -- All DOE Office Websites (Extended Search)

    partnerships partnerships Tag: partnerships Displaying 1 - 10 of 14... Category: News Grad Assistants Make Their Mark UT students work with the UPF project and Y-12 researchers seeking fresh ideas and extra hands. More... Category: News B&W Y-12 signs two new Mentor-Protégé agreements B&W Y-12 recently signed agreements with two new protégés. The companies join eight other groups currently involved in Y-12's Mentor-Protégé program. More... Category: News Students analyze artificial implants at ASM Materials Camp The leg bone is connected to the hip prosthesis: Students analyze artificial implants at ASM Materials Camp More... Category: News Y-12, UT, and Stanley Healthcare work to advance technology Representatives from the Y-12 National Security Complex; the University of

    163

    Tag: Community | Y-12 National Security Complex  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Community Community Tag: Community Displaying 1 - 10 of 12... Category: Community Warm coats, big thanks Y-12 employees help people face some of the coldest temperatures East Tennessee has seen in a long time. More... Category: Community Y-12's historian receives 2013 Muddy Boot Award Y-12 historian Ray Smith has received a Muddy Boot award for helping make East Tennessee a stronger region. More... Category: Community Engineering videoconference At Y-12 you get to be creative and to create software applications and hardware infrastructure that other people use. More... Category: Community Investing in Education Lab-in-a-Box - Area school systems received Lab-in-a-Box kits provided by the Rural Communities STEM Initiativ More... Category: Community Corporate Giving B&W Y-12 has established a strong reputation as a corporate citizen

    164

    Tag: transformation | Y-12 National Security Complex  

    NLE Websites -- All DOE Office Websites (Extended Search)

    transformation transformation Tag: transformation Displaying 1 - 10 of 11... Category: News Y-12 Knows Uranium Y-12 produces many forms of uranium. More... Category: News Energy Secretary Moniz visits Y-12 Secretary of Energy Ernest Moniz (at right) tours the Highly Enriched Uranium Materials Facility during his visit Monday to Y-12. More... Category: About Site improvements of $490 million result from FIRP The Facilities and Infrastructure Recapitalization Program has been a key component of modernization and transformation efforts at Y-12. More... Category: Nuclear Deterrence Processing Y-12's core manufacturing and processing operations are housed in decades-old buildings near or past the end of their expected life spans. More... Category: About Uranium Processing Facility An integral part of Y-12's transformation efforts and a key component

    165

    OpenEI Community - tagging API  

    Open Energy Info (EERE)

    Reegle mentions Reegle mentions OpenEI in video on new Content Pool API http://en.openei.org/community/blog/reegle-mentions-openei-video-new-content-pool-api Reegle and OpenEI share the vision that easy access to energy information will help drive future developments in clean energy development.read more http://en.openei.org/community/blog/reegle-mentions-openei-video-new-content-pool-api#comments data energy OpenEI REEEP REEGLE structured tagging API OpenEI Community

    166

    Tag: security | Y-12 National Security Complex  

    NLE Websites -- All DOE Office Websites (Extended Search)

    security security Tag: security Displaying 1 - 5 of 5... Category: Security Security Y-12 places the highest priority on maintaining and improving its security posture. More... Category: News Johnson shares perspective on security Rod Johnson, B&W Y-12 deputy general manager of Security, recently discussed the security atmosphere since his arrival last August and what he sees as Y-12's security future. More... Category: News Y-12 to Install New Fence to Reduce Trespassing The National Nuclear Security Administration today announced plans to extend the boundary fence at the Y-12 National Security Complex along Scarboro Road. The new fence is expected to be in place by April 4. More... Category: News New institute promotes nuclear security Y-12 is partnering with the University of Tennessee and others to provide

    167

    Tag-it, snag-it, or bag-it: combining tags, threads, and folders in e-mail  

    Science Conference Proceedings (OSTI)

    We describe the design of bluemail, a web-based email system that provides message tagging, message threading, and email folders. We wanted to explore how this combination of features would help users manage and organize their email. We conducted a limited ... Keywords: email, folders, tagging, threading, user study, web 2.0, web-based email

    John C. Tang; Eric Wilcox; Julian A. Cerruti; Hernan Badenes; Stefan Nusser; Jerald Schoudt

    2008-04-01T23:59:59.000Z

    168

    Source Selection Guide | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Source Selection Guide Source Selection Guide Source Selection Guide More Documents & Publications Source Selection Guide Source Selection Guide Source Selection...

    169

    Acquisition Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    .4 (February 20 10) .4 (February 20 10) Source Evaluation Board (SEB) Secretariat and Knowledge Manager Guiding Principles P Establishment of a SEB Secretariat and Knowledge Management position will improve both the Department's procurement system and its management of knowledge attained by the Department's procurement personnel. REFERENCES Department of Energy (DOE) report on "Report on Reengineering the Business Clearance Process" issued November 2007 National Academy of Public Administration report on "Managing at the Speed of Light - Improving Mission Support Performance" issued July 2009 Government Accountability Office (GAO) report on "Better Performance Measures and Management Needed to Address Delays in Awarding Contracts (GAO-06-722)" issued June

    170

    TAGGING, TRACKING AND LOCATING WITHOUT GPS  

    SciTech Connect

    The Savannah River National Laboratory (SRNL) was requested to lead a Law Enforcement Working Group that was formed to collaborate on common operational needs. All agencies represented on the working group ranked their need to tag, track, and locate a witting or unwitting target as their highest priority. Specifically, they were looking for technologies more robust than Global Positioning Satellite (GPS), could communicate back to the owner, and worked where normal cell phone communications did not work or were unreliable. SRNL brought together multiple technologies in a demonstration that was held in in various Alaska venues, including metropolitan, wilderness, and at-sea that met the working group's requirements. Using prototypical technologies from Boeing, On Ramp, and Fortress, SRNL was able to demonstrate the ability to track personnel and material in all scenarios including indoors, in heavily wooden areas, canyons, and in parking garages. In all cases GPS signals were too weak to measure. Bi-directional communication was achieved in areas that Wi-Fi, cell towers, or traditional radios would not perform. The results of the exercise will be presented. These technologies are considered ideal for tracking high value material such has nuclear material with a platform that allows seamless tracking anywhere in the world, indoors or outdoors.

    Cordaro, J.; Coleman, T.; Shull, D.

    2012-07-08T23:59:59.000Z

    171

    Online b-jets tagging at CDF  

    Science Conference Proceedings (OSTI)

    We propose a method to identify b-quark jets at trigger level which exploits recently increased CDF trigger system capabilities. b-quark jets identification is of central interest for the CDF high-P{sub T} physics program, and the possibility to select online b-jets enriched samples can extend the physics reaches especially for light Higgs boson searches where the H {yields} b{bar b} decay mode is dominant. Exploiting new trigger primitives provided by two recent trigger upgrades, the Level2 XFT stereo tracking and the improved Level2 cluster-finder, in conjunction with the existing Silicon Vertex Tracker (SVT), we design an online trigger algorithm aimed at selecting good purity b-jets samples useful for many physics measurements, the most important being inclusive H {yields} b{bar b} searches. We discuss the performances of the proposed b-tagging algorithm which must guarantee reasonable trigger rates at luminosity greater than 2 x 10{sup 32} cm{sup -2}s{sup -1} and provide high efficiency on H {yields} b{bar b} events.

    Casarsa, M.; /Fermilab; Ristori, L.; /INFN, Pisa; Amerio, S.; Lucchesi, D.; Pagan Griso, S.; /INFN, Padua; Torre, S.T.; /Frascati; Cortiana, G.; /Padua U., Astron. Dept.

    2007-04-01T23:59:59.000Z

    172

    Prospects for Barium Tagging in Gaseous Xenon  

    DOE Green Energy (OSTI)

    Tagging events with the coincident detection of a barium ion would greatly reduce the background for a neutrino-less double beta decay search in xenon. This paper describes progress towards realizing this goal. It outlines a source that can produce large quantities of Ba++ in gas, shows that this can be extracted to vacuum, and demonstrates a mechanism by which the Ba++ can be efficiently converted to Ba+ as required for laser identification. It is clear from this study that electrospray is a convenient mechanism for producing Ba++ is gas at atmospheric pressure. It is likely that the source will perform just as effectively at higher pressures. Even though the source region has water vapour and methanol vapour at the 0.3% level, there is no evidence for molecular formation. The use of TEA offers an effective method to achieve the charge state conversion. The overall design of the ion extraction from high pressure to vacuum is very similar to the scheme proposed for the final detector and this appears to work well although the efficiency is not yet determined.

    Sinclair, D.; /Carleton U. /TRIUMF; Rollin, E.; /Carleton U.; Smith, J.; /Carleton U.; Mommers, A.; /Ottawa U.; Ackerman, N.; /SLAC; Aharmim, B.; /Laurentian U.; Auger, M.; /Bern U., LHEP; Barbeau, P.S.; /Stanford U., Phys. Dept.; Benitez-Medina, C.; /Colorado State U.; Breidenbach, M.; /SLAC; Burenkov, A.; /Moscow, ITEP; Cook, S.; /SLAC; Coppens, A.; /Carleton U.; Daniels, T.; /Massachusetts U., Amherst; DeVoe, R.; /Stanford U., Phys. Dept.; Dobi, A.; /Maryland U.; Dolinski, M.J.; Donato, K.; /Stanford U., Phys. Dept.; Fairbank, W., Jr.; /Colorado State U.; Farine, J.; /Laurentian U.; Giroux, G.; /Bern U., LHEP /Carleton U. /Stanford U., Phys. Dept. /Carleton U. /Laurentian U. /Carleton U. /SLAC /Indiana U. /Indiana U., CEEM /Korea U. /Stanford U., Phys. Dept. /SLAC /Alabama U. /Colorado State U. /Stanford U., Phys. Dept. /Alabama U. /SLAC /Stanford U., Phys. Dept. /Alabama U. /Massachusetts U., Amherst /SLAC /Alabama U. /SLAC /Maryland U. /Moscow, ITEP /Stanford U., Phys. Dept. /Maryland U. /Bern U., LHEP /Laurentian U. /SLAC /Maryland U.

    2012-05-03T23:59:59.000Z

    173

    Stable Isotope, Site-Specific Mass Tagging For Protein Identification  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Stable Isotope, Site-Specific Mass Tagging For Protein Stable Isotope, Site-Specific Mass Tagging For Protein Identification Stable Isotope, Site-Specific Mass Tagging For Protein Identification Proteolytic peptide mass mapping as measured by mass spectrometry provides an important method for the identification of proteins, which are usually identified by matching the measured and calculated m/z values of the proteolytic peptides. Available for thumbnail of Feynman Center (505) 665-9090 Email Stable Isotope, Site-Specific Mass Tagging For Protein Identification Proteolytic peptide mass mapping as measured by mass spectrometry provides an important method for the identification of proteins, which are usually identified by matching the measured and calculated m/z values of the proteolytic peptides. A unique identification is, however, heavily

    174

    Digital Forensics in small devices: RFID tag investigation .  

    E-Print Network (OSTI)

    ??Read/Write Radio Frequency Identification (R/W RFID) chips are commonly used to tag stock in retail shops. The security risk of RFID has been well established… (more)

    Kyaw, Ar Kar

    2011-01-01T23:59:59.000Z

    175

    mTags: augmenting microkernel messages with lightweight metadata  

    Science Conference Proceedings (OSTI)

    In this work we propose mTags, an efficient mechanism that augments microkernel interprocess messages with lightweight metadata to enable the development of new, system-wide functionality without requiring modification of the application source code. ...

    Augusto Born de Oliveira; Ahmad Saif Ur Rehman; Sebastian Fischmeister

    2012-07-01T23:59:59.000Z

    176

    Acquisition Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Chapter 71.1 (June 2010) Chapter 71.1 (June 2010) 1 HEADQUARTERS BUSINESS CLEARANCE PROCESS Overview This guide chapter provides guidance regarding the policies and procedures governing the Headquarters Business Clearance Review (BCR) process, the process by which certain procurement actions (solicitations, contracts, major contract changes, etc.) are reviewed and approved by the DOE Senior Procurement Executive (SPE) as a condition precedent to executing them. This section does not apply to the National Nuclear Security Administration (NNSA). Separate NNSA coverage is in BOP-003 and BOP-304. Background A. The Flow of Procurement Authority within the Department of Energy (DOE) The Secretary of Energy designated the Director, Office of Procurement and Assistance

    177

    Acquisition Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    3.2 (November 2009) 3.2 (November 2009) PURCHASE ORDERS GUIDING PRINCIPLES J Purchase Orders should normally be issued on a fixed-price basis. J Modifications of Purchase Orders may be used for unpriced orders and for administrative matters on priced orders. J Purchase orders cannot exceed the simplified acquisition threshold. This section discusses the Department of Energy's (DOE) use of purchase orders as described in Federal Acquisition Regulation (FAR) 13.302 and the Department of Energy's Acquisition Regulation (DEAR) Section 91 3.304. Only contracting officers acting within the scope of their authority are empowered to execute purchase orders on behalf of DOE. Authority A. Federal Acquisition Regulation (FAR) Subpart 13.302. B. DEAR 913.307 Background When shouldpurchase orders be used? Due to the administrative cost of preparing and handling

    178

    Clearance and Tagging Guideline for Fossil Electric Generating Stations  

    Science Conference Proceedings (OSTI)

    In their trips to more than a dozen plants in the past three years, Electric Power Research Institute (EPRI) teams observed that clearance and tagging processes have ranged from comprehensive to less than adequate. In plants with detailed procedures and plants with less than adequate procedures, activities have been observed that were not as safe as they should have been. EPRI and fossil generating advisors determined that a clearance and tagging guideline was needed. EPRI and the industry advisors decid...

    2008-03-26T23:59:59.000Z

    179

    Technology Readiness Assessment Report  

    Energy.gov (U.S. Department of Energy (DOE))

    This document has been developed to guide individuals and teams that will be involved in conducting Technology Readiness Assessments (TRAs) and developing Technology Maturation Plans (TMPs) for the...

    180

    Tags and seals to strengthen arms control verification  

    SciTech Connect

    Tags and seals have long been recognized as important tools in arms control. The trend in control of armaments is to limit militarily significant equipment that is capable of being verified through direct and cooperative means, chiefly on-site inspection or monitoring. Although this paper will focus on the CFE treaty, the role of tags and seals for other treaties will also be addressed. Published technology and concepts will be reviewed, based on open sources. Arms control verification tags are defined as unique identifiers designed to be tamper-revealing; in that respect, seals are similar, being used as indicators of unauthorized access. Tamper-revealing tags are intended as single-point markers, seals for two-point couplings, and nets for volume containment. Seals usually bind two separate components, such as a hatch or flange that provides access to a secure compartment or a valve that controls fluid flow. A tamper-revealing net might be comprised of a coupled fiberoptic bundle wrapped around an object. Sometimes the term ``seal`` is used to denote the tamper-revealing feature of a tag that is attached to a surface, but in this paper the tamper-indicating connection is considered to be part of the tag concept itself.

    DeVolpi, A.

    1990-10-03T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    181

    Beyond co-occurrence: discovering and visualizing tag relationships from geo-spatial and temporal similarities  

    Science Conference Proceedings (OSTI)

    Studying relationships between keyword tags on social sharing websites has become a popular topic of research, both to improve tag suggestion systems and to discover connections between the concepts that the tags represent. Existing approaches have largely ... Keywords: flickr, geo-spatial and temporal clustering, tag semantics and visualization

    Haipeng Zhang; Mohammed Korayem; Erkang You; David J. Crandall

    2012-02-01T23:59:59.000Z

    182

    Folksonomy link prediction based on a tripartite graph for tag recommendation  

    Science Conference Proceedings (OSTI)

    Nowadays social tagging has become a popular way to annotate, search, navigate and discover online resources, in turn leading to the sheer amount of user-generated metadata. This paper addresses the problem of recommending suitable tags during folksonomy ... Keywords: Folksonomy, Graph-based ranking, Link prediction, Social tagging, Tag recommendation, Tripartite graph

    Majdi Rawashdeh; Heung-Nam Kim; Jihad Mohamad Alja'Am; Abdulmotaleb Saddik

    2013-04-01T23:59:59.000Z

    183

    A weighted tag similarity measure based on a collaborative weight model  

    Science Conference Proceedings (OSTI)

    The problem of measuring semantic relatedness between social tags remains largely open. Given the structure of social bookmarking systems, similarity measures need to be addressed from a social bookmarking systems perspective. We address the fundamental ... Keywords: similarity measures, tag similarity, tag weighting, tagging, vector space model

    Gokavarapu Srinivas; Niket Tandon; Vasudeva Varma

    2010-10-01T23:59:59.000Z

    184

    Guide to Integrating Renewable Energy in Federal Construction: Project  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Project Construction to someone by E-mail Project Construction to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Project Construction on Facebook Tweet about Guide to Integrating Renewable Energy in Federal Construction: Project Construction on Twitter Bookmark Guide to Integrating Renewable Energy in Federal Construction: Project Construction on Google Bookmark Guide to Integrating Renewable Energy in Federal Construction: Project Construction on Delicious Rank Guide to Integrating Renewable Energy in Federal Construction: Project Construction on Digg Find More places to share Guide to Integrating Renewable Energy in Federal Construction: Project Construction on AddThis.com... Home Introduction Assessing Renewable Energy Options Planning, Programming, & Budgeting

    185

    Guide to Integrating Renewable Energy in Federal Construction: Outreach  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Outreach to someone by E-mail Outreach to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Outreach on Facebook Tweet about Guide to Integrating Renewable Energy in Federal Construction: Outreach on Twitter Bookmark Guide to Integrating Renewable Energy in Federal Construction: Outreach on Google Bookmark Guide to Integrating Renewable Energy in Federal Construction: Outreach on Delicious Rank Guide to Integrating Renewable Energy in Federal Construction: Outreach on Digg Find More places to share Guide to Integrating Renewable Energy in Federal Construction: Outreach on AddThis.com... Home Introduction Assessing Renewable Energy Options Planning, Programming, & Budgeting Project Funding Building Design Project Construction Commissioning Operations & Maintenance

    186

    Guide to Integrating Renewable Energy in Federal Construction: Training  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Training to someone by E-mail Training to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Training on Facebook Tweet about Guide to Integrating Renewable Energy in Federal Construction: Training on Twitter Bookmark Guide to Integrating Renewable Energy in Federal Construction: Training on Google Bookmark Guide to Integrating Renewable Energy in Federal Construction: Training on Delicious Rank Guide to Integrating Renewable Energy in Federal Construction: Training on Digg Find More places to share Guide to Integrating Renewable Energy in Federal Construction: Training on AddThis.com... Home Introduction Assessing Renewable Energy Options Planning, Programming, & Budgeting Project Funding Building Design Project Construction Commissioning Operations & Maintenance

    187

    Guide to Integrating Renewable Energy in Federal Construction: Resources  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Resources to someone by E-mail Resources to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Resources on Facebook Tweet about Guide to Integrating Renewable Energy in Federal Construction: Resources on Twitter Bookmark Guide to Integrating Renewable Energy in Federal Construction: Resources on Google Bookmark Guide to Integrating Renewable Energy in Federal Construction: Resources on Delicious Rank Guide to Integrating Renewable Energy in Federal Construction: Resources on Digg Find More places to share Guide to Integrating Renewable Energy in Federal Construction: Resources on AddThis.com... Home Introduction Assessing Renewable Energy Options Planning, Programming, & Budgeting Project Funding Building Design Project Construction Commissioning Operations & Maintenance

    188

    Guide to Integrating Renewable Energy in Federal Construction: Major  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Major Renovations to someone by E-mail Major Renovations to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Major Renovations on Facebook Tweet about Guide to Integrating Renewable Energy in Federal Construction: Major Renovations on Twitter Bookmark Guide to Integrating Renewable Energy in Federal Construction: Major Renovations on Google Bookmark Guide to Integrating Renewable Energy in Federal Construction: Major Renovations on Delicious Rank Guide to Integrating Renewable Energy in Federal Construction: Major Renovations on Digg Find More places to share Guide to Integrating Renewable Energy in Federal Construction: Major Renovations on AddThis.com... Home Introduction Assessing Renewable Energy Options Planning, Programming, & Budgeting Project Funding

    189

    Fundamental Guided Wave Metrology  

    Science Conference Proceedings (OSTI)

    Fundamental Guided Wave Metrology. Summary: ... The program is focused on fundamental measurement research for microwave parameters. ...

    2010-10-05T23:59:59.000Z

    190

    NIST Recommended Practice Guides  

    Science Conference Proceedings (OSTI)

    NIST Recommended Practice Guides -- The "How To Measure" Book Series. Targeted toward specific industrial challenges ...

    2011-05-05T23:59:59.000Z

    191

    VISION 2008 User's Guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    VISION 2008 User's Guide VISION 2008 User's Guide ANL-08/34 Energy Systems Division VISION 2008 User's Guide ANL-08/34 User's Guide by J. Ward Vehicle Technologies Program, U.S. Department of Energy, Energy Efficiency and Renewable Energy VISION model by A. Vyas and M. Singh Transportation Technology R&D Center, Argonne National Laboratory October 2008 VISION 2008 User's Guide October 2008 i Table of Contents Copyright Notification .............................................................................................................................. ii List of Abbreviations ................................................................................................................................ iii

    192

    Substation Site Assessment  

    Science Conference Proceedings (OSTI)

    Companies assess environmental conditions at their facilities as part of routine operations and in preparation of property transfers. This report and template provide a simple, efficient guide for assessing substation facilities.

    2001-02-09T23:59:59.000Z

    193

    First Study of Neutron Tagging with a Water Cherenkov Detector  

    E-Print Network (OSTI)

    A first study of neutron tagging is conducted in Super--Kamiokande, a 50,000-ton water Cherenkov detector. The tagging efficiencies of thermal neutrons are evaluated in a 0.2 % GdCl$_{3}$-water solution and pure water. They are determined to be, respectively, 66.7 % for events above 3 MeV and 20 % with corresponding background probabilities of 2 $\\times$ 10$^{-4}$ and 3 $\\times$ 10$^{-2}$. This newly developed technique may enable water Cherenkov detectors to identify $\\bar \

    The Super-Kamiokande Collaboration; :; H. Watanabe; H. Zhang

    2008-11-05T23:59:59.000Z

    194

    First Study of Neutron Tagging with a Water Cherenkov Detector  

    E-Print Network (OSTI)

    A first study of neutron tagging is conducted in Super--Kamiokande, a 50,000-ton water Cherenkov detector. The tagging efficiencies of thermal neutrons are evaluated in a 0.2 % GdCl$_{3}$-water solution and pure water. They are determined to be, respectively, 66.7 % for events above 3 MeV and 20 % with corresponding background probabilities of 2 $\\times$ 10$^{-4}$ and 3 $\\times$ 10$^{-2}$. This newly developed technique may enable water Cherenkov detectors to identify $\\bar \

    Watanabe, Hideki

    2008-01-01T23:59:59.000Z

    195

    Facility Representative Program: Surveillance Guides  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Assessment Tools Assessment Tools CRADs Manager's Guide for Safety and Health Walkthroughs Surveillance Guides CMS 3.1 Configuration Management Implementation CMS 3.2 Change Control CMS 3.3 Verification of System Configuration and Operations CMS 3.4 Temporary Changes CPS 8.1 Hoisting and Rigging CPS 8.2 Trenching and Excavation EMS 21.1 Emergency Preparedness ENS 7.1 Definition of Design Requirements ERS 14.1 Satellite Accumulation Ares (RCRA Compliance) ERS 14.2 Emmissions Monitoring ERS 14.3 Underground and Above Ground Diesel Fuel Storage Tanks FPS 12.1 Life Safety FPS 12.2 Fire Protection and Prevention MAS 10.1 Maintenance Activities MAS 10.2 Control of Measuring and Test Equipment MAS 10.3 Seasonal Preparation MSS 1.1 Corrective Action/Issue Management NSS 18.1 Criticality Safety

    196

    Assessment  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Genetic Genetic Variability of Cell Wall Degradability for the Selection of Alfalfa with Improved Saccharification Efficiency Marc-Olivier Duceppe & Annick Bertrand & Sivakumar Pattathil & Jeffrey Miller & Yves Castonguay & Michael G. Hahn & Réal Michaud & Marie-Pier Dubé # Her Majesty the Queen in Right of Canada 2012 Abstract Alfalfa (Medicago sativa L.) has a high potential for sustainable bioethanol production, particularly because of its low reliance on N fertilizer. We assessed near-infrared reflec- tance spectroscopy (NIRS) as a high-throughput technique to measure cell wall (CW) degradability in a large number of lignified alfalfa stem samples. We also used a powerful immu- nological approach, glycome profiling, and chemical analyses to increase our knowledge of the composition of CW poly- saccharides of alfalfa stems with various levels

    197

    Protocol, Test Inspectors Guide - March 2008 | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Test Inspectors Guide - March 2008 Test Inspectors Guide - March 2008 Protocol, Test Inspectors Guide - March 2008 March 2008 Emergency Management Limited Scope Performance Test Inspectors Guide Emergency Management Limited Scope Performance Tests Inspectors Guide provides detailed information and tools to assist inspectors assigned to evaluate the capabilities and performance of emergency responders in DOE/NNSA. Although this guide is designed specifically for the HS-63 inspector, it is made available to the field and may be useful to field element and facility contractor personnel who conduct surveys or self-assessments of emergency management programs. Protocol, Test Inspectors Guide - March 2008 More Documents & Publications Protocol, Appraisal Process Guide - April 2008 Independent Oversight Review, Los Alamos National Laboratory - April 2012

    198

    Energy Efficiency Technology Readiness Guide  

    Science Conference Proceedings (OSTI)

    As electric power companies strive to meet increasing end-use energy efficiency requirements, they must make decisions about which technologies seem most promising in terms of availability for wide deployment and providing persistent energy savings while also being cost-effective and likely to be adopted by customers. To help electric power companies with these decisions, EPRI has developed this Technology Readiness Guide to provide a readiness assessment of technologies in various stages of ...

    2012-12-31T23:59:59.000Z

    199

    Search Guide 20091 Library Catalogue -Quick Guide  

    E-Print Network (OSTI)

    into the author or title field. If you don't know the exact title or author then enter the search term for an electronic book? On the basic search screen select E-books from the drop down collection menu. Enter keywordSearch Guide 20091 1 Library Catalogue - Quick Guide What is the purpose of the library catalogue

    Lee, Hyowon

    200

    Improving part-of-speech tagging using lexicalized HMMs  

    Science Conference Proceedings (OSTI)

    We introduce a simple method to build Lexicalized Hidden Markov Models (L-HMMs) for improving the precision of part-of-speech tagging. This technique enriches the contextual Language Model taking into account a set of selected words empirically obtained. ...

    Ferran Pla; Antonio Molina

    2004-06-01T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    201

    Building a Tag Map for Recommendations in Microblogging  

    Science Conference Proceedings (OSTI)

    In its brief history of about two decades, the Web has evolved from a technical framework for information dissemination to more of an enabler of social interactions among its users. This weaves a huge virtual social network for users. Finding friends ... Keywords: tag map, recommender, social media, microblogging

    Yinghua Xiao; Ting Du; Wen Zhu; Qing Li

    2012-10-01T23:59:59.000Z

    202

    Toward enhanced Arabic speech recognition using part of speech tagging  

    Science Conference Proceedings (OSTI)

    One major source of suboptimal performance in automatic continuous speech recognition systems is misrecognition of small words. In general, errors resulting from small words are much more than errors resulting from long words. Therefore, compounding ... Keywords: Compound words, Language model, Modern Standard Arabic, Part of speech tagging, Speech recognition

    Dia Abuzeina; Wasfi Al-Khatib; Moustafa Elshafei; Husni Al-Muhtaseb

    2011-12-01T23:59:59.000Z

    203

    Sentiment tagging of adjectives at the meaning level  

    Science Conference Proceedings (OSTI)

    We present a sentiment tagging system which is based on multiple bootstrapping runs on WordNet synsets and glosses using different non-intersecting seed lists of manually annotated words. The system is further enhanced by the addition of a module for ...

    Alina Andreevskaia; Sabine Bergler

    2006-06-01T23:59:59.000Z

    204

    Semantic collaborative tagging for web APIs sharing and reuse  

    Science Conference Proceedings (OSTI)

    Sharing and reuse of Web APIs for fast development of Web applications require advanced searching facilities to enable Web designers to find the Web APIs they need. In this paper we describe a Web API semantic collaborative tagging system to be implemented ...

    Devis Bianchini; Valeria De Antonellis; Michele Melchiori

    2012-07-01T23:59:59.000Z

    205

    Tagging of name records for genealogical data browsing  

    Science Conference Proceedings (OSTI)

    In this paper we present a method of parsing unstructured textual records briefly describing a person and their direct relatives, which we use in the construction of a browsing tool for genealogical data. The records have been created by researchers ... Keywords: genealogy, information retrieval, tagging, visualization

    Mike Perrow; David Barber

    2006-06-01T23:59:59.000Z

    206

    Pulverizer Maintenance Guide  

    Science Conference Proceedings (OSTI)

    The Pulverizer Maintenance Guide, Volume 3: Ball/Tube Mills provides fossil plant personnel with current maintenance information on ball/tube mills from different manufacturers. This guide will assist a plant in improving the maintenance of their pulverizer mills.

    2006-03-31T23:59:59.000Z

    207

    Unit Outline Training Guide  

    E-Print Network (OSTI)

    Unit Outline Builder Training Guide Document Status: Final Revision Number: 6.0 Revision Date: 14 Approved #12;Online Unit Outline Builder Training Guide Curtin University of Technology Page 2 TABLE................................................................................................................. 4 4. Log in and Select a Unit Outline

    208

    Feedwater Heater Maintenance Guide  

    Science Conference Proceedings (OSTI)

    This guide provides plant personnel with information on the operation, maintenance, and performance of feedwater heaters. The contents of this guide will assist plant personnel in improving feedwater heater reliability, performance, and maintenance practices.

    2002-05-29T23:59:59.000Z

    209

    Development and Evaluation of Passive Integrated Transponder Tag Technology, 2000-2002.  

    DOE Green Energy (OSTI)

    Since 1984, the National Marine Fisheries Service (NMFS) in cooperation with the Bonneville Power Administration (BPA) has conducted a research project to develop and evaluate technology for passive-integrated-transponder tags (PIT tags) throughout the Columbia River Basin (CRB). Work conducted as part of this project between October 2000 and September 2002 (FY01 and FY02) was divided into seven individual elements, which are covered separately in this report. The efforts by personnel associated with this project have produced and will continue to produce products that aid resource stakeholders in assessing the effectiveness of actions taken to enhance the survival of juvenile and adult salmonids. These products and their uses include: (1) Survival and migration timing information on stocks to evaluate water management strategies and fish passage/collection facilities; (2) Data needed for the management and restoration of salmonids and other fish stocks listed under the Endangered Species Act (ESA); (3) Information required for the management of multiple species in a variety of habitats; and (4) Tools that enable fisheries researchers and managers to address previously unanswerable questions and critical uncertainties These products are also used in genetic, physiology, behavior, and captive broodstock research on endangered species. The continued development of PIT-tag technology will enable researchers and fisheries managers to address issues expressed in both of NMFS biological opinions for operation of the Federal Columbia River Power System (FCRPS)(NMFS 1995a, 2000) and the proposed Snake River Recovery Plan (NMFS 1995b; tasks 2.1.d, 2.3.b.4, 2.4.a, 2.6.c.2, and 2.9.d).

    Downing, Sandra L.; Prentice, Earl F.; Nunnallee, Edmund P. [National Marine Fisheries Service

    2009-04-03T23:59:59.000Z

    210

    Metric Conversion Guide  

    Science Conference Proceedings (OSTI)

    ...Documents, U.S. Government Printing Office, Washington, DC 20402-9325 Metric Editorial Guide, 5th ed. (revised), 1993,

    211

    Metric Conversion Guide  

    Science Conference Proceedings (OSTI)

    ...Documents, U.S. Government Printing Office, Washington, DC 20402-9325 Metric Editorial Guide , 5th ed. (revised), 1993,

    212

    Complexity: A Guided Tour  

    Science Conference Proceedings (OSTI)

    Complexity: A Guided Tour. Purpose: As science probes the nature of life, society, and technology ever more closely, what ...

    2012-04-02T23:59:59.000Z

    213

    The FindIT Flashlight: Responsive Tagging Based on Optically Triggered Microprocessor Wakeup  

    Science Conference Proceedings (OSTI)

    We have designed an active tagging system that responds to a coded optical beam from several meters away. The tags contain a minimalist microprocessor that ambiently operates in shutdown mode and, upon detecting particular frequency components in the ...

    Hongshen Ma; Joseph A. Paradiso

    2002-09-01T23:59:59.000Z

    214

    A battery-free tag for wireless monitoring of heart sounds  

    E-Print Network (OSTI)

    We have developed a wearable, battery-free tag that monitors heart sounds. The tag powers up by harvesting ambient RF energy, and contains a low-power integrated circuit, an antenna and up to four microphones. The chip, ...

    Mandal, Soumyajit

    215

    Process design and modeling for the production of triacylglycerols (TAGs) in Rhodococcus opacus PD630  

    E-Print Network (OSTI)

    The oleaginous microorganism Rhodococcus opacus PD630 was used to study the characteristics and kinetics of the accumulation of triacylglycerols (TAGs) in cells. In this process, accumulation of TAG is stimulated when a ...

    Miller, Neidi

    2012-01-01T23:59:59.000Z

    216

    Profile Guided Load Marking for Memory Renaming  

    E-Print Network (OSTI)

    Memory operations remain a significant bottleneck in dynamically scheduled pipelined processors, due in part to the inability to statically determine the existence of memory address dependencies. Hardware memory renaming techniques have been proposed which predict which stores a load might be dependent upon. These prediction techniques can be used to speculatively forward a value from a predicted store dependency to a load through a value prediction table; however, these techniques require large and time-consuming hardware tables. In this paper we propose a software-guided approach for identifying dependencies between store and load instructions and the Load Marking (LM) architecture to communicate these dependencies to the hardware. Compiler analysis and profiles are used to find important store/load relationships, and these relationships are identified during execution via hints or an n-bit tag. For those loads that are not marked for renaming, we then use additional profiling inform...

    Glenn Reinman; Brad Calder; Dean Tullsen; Gary Tyson; Todd Austin

    1998-01-01T23:59:59.000Z

    217

    Maintenance Guide for DOE Low-Level Waste Disposal Facility  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    4 4 G Approved: XX-XX-XX IMPLEMENTATION GUIDE for use with DOE M 435.1-1 Maintenance Guide for U.S. Department of Energy Low-Level Waste Disposal Facility Performance Assessments and Composite Analyses U.S. DEPARTMENT OF ENERGY DOE G 435.1-4 i (and ii) DRAFT XX-XX-XX LLW Maintenance Guide Revision 0, XX-XX-XX Maintenance Guide for U.S. Department of Energy Low-Level Waste Disposal Facility Performance Assessments and Composite Analyses CONTENTS 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.3 Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.3.1 Objectives . . . . . . . . . . . . . . . . . . . . . . . . .

    218

    Analysis of communication between RFID tags and their reader using statistical simulation model  

    Science Conference Proceedings (OSTI)

    RFID collision occurs when two or more tags attempt to send a frame of data along the same communication channel at the same time. Collision typically results in false alarm. In this paper the authors simulate the communication flow between tags ... Keywords: RFID collision, RFID reader, RFID tags, communication flow, exponential distribution, false alarms, radio frequency identification, statistical simulation modelling, tracking application

    C. Parikh; I. Zeid; S. Kamarthi; J. Benneyan

    2008-09-01T23:59:59.000Z

    219

    Optimization of continuous query processing for RFID sensor tag data stream  

    Science Conference Proceedings (OSTI)

    In RFID system, RFID tags emit data continuously and sensed by RFID access point. RFID data are appears in form of stream data items to RFID host. By this RFID data collecting, RFID system provides identification information of objects which tags attached ... Keywords: RFID sensor tag, RFID system, continuous query, data stream management system

    Yongxu Piao; Wooseok Ryu; Haipeng Zhang; Bonghee Hong

    2009-11-01T23:59:59.000Z

    220

    Molecular Tagging Diagnostics for the Study of Kinematics and Mixing in Liquid-Phase Flows  

    E-Print Network (OSTI)

    Molecular Tagging Diagnostics for the Study of Kinematics and Mixing in Liquid-Phase Flows M. M based on molecular tagging approaches. These developments take advantage of a class of newly engineered and caged fluorescein are briefly discussed and compared. The application of molecular tagging velocimetry

    Koochesfahani, Manoochehr M.

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    221

    Purpose tagging: capturing user intent to assist goal-oriented social search  

    Science Conference Proceedings (OSTI)

    The terms that are used by users during tagging have been found to be different from the terms that are used when searching for resources, which represents a fundamental problem for search in tagging based systems. To address this problem, we propose ... Keywords: social bookmarking, social search, tagging, user intent

    Markus Strohmaier

    2008-10-01T23:59:59.000Z

    222

    HQ Leave Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Leave Guide Leave Guide Purpose of this Guide The purpose of this guide is to provide you, as a Headquarters employee, advice and guidance concerning issues related to hours of duty, time & attendance, and matters related to taking time off (e.g., annual and sick leave). However, this guide can not provide all encompassing guidance for all situations. In many cases, the answer is subject to office policy and/or supervisory judgment. For these reasons, any questions about how matters in this guide apply to you should first be discussed with your supervisor. If your supervisor is unable to answer your specific question or issue, you or your supervisor should contact the Headquarters Employee/Labor Relations Services Team on (202) 586-8731. Who is Covered by this Guide

    223

    Design and Analysis of Salmonid Tagging Studies in the Columbia Basin, Volume XVI; Alternative Designs for Future Adult PIT-Tag Detection Studies, 2000 Technical Report.  

    DOE Green Energy (OSTI)

    In the advent of the installation of a PIT-tag interrogation system in the Cascades Island fish ladder at Bonneville Dam (BON), and other CRB dams, this overview describes in general terms what can and cannot be estimated under seven different scenarios of adult PIT-tag detection capabilities in the CRB. Moreover, this overview attempted to identify minimal adult PIT-tag detection configurations required by the ten threatened Columbia River Basin (CRB) chinook and steelhead ESUs. A minimal adult PIT-tag detection configuration will require the installation of adult PIT-tag detection facilities at Bonneville Dam and another dam above BON. Thus, the Snake River spring/summer and fall chinook salmon, and the Snake River steelhead will require a minimum of three dams with adult PIT-tag detection capabilities to guarantee estimates of ''ocean survival'' and at least of one independent, in-river returning adult survival (e.g., adult PIT-tag detection facilities at BON and LGR dams and at any other intermediary dam such as IHR). The Upper Columbia River spring chinook salmon and steelhead will also require a minimum of three dams with adult PIT-tag detection capabilities: BON and two other dams on the BON-WEL reach. The current CRB dam system configuration and BPA's and COE's commitment to install adult PIT-tag detectors only in major CRB projects will not allow the estimation of an ''ocean survival'' and of any in-river adult survival for the Lower Columbia River chinook salmon and steelhead. The Middle Columbia River steelhead ESU will require a minimum of two dams with adult PIT-tag detection capabilities: BON and another upstream dam on the BON-McN reach. Finally, in spite of their importance in terms of releases, PIT-tag survival studies for the Upper Willamette chinook and Upper Willamette steelhead ESUs cannot be perform with the current CRB dam system configuration and PIT-tag detection capabilities.

    Perez-Comas, Jose A.; Skalski, John R. (University of Washington, School of Fisheries, Seattle, WA)

    2000-09-25T23:59:59.000Z

    224

    Applications Guide for Guided Wave Inspection Technology  

    Science Conference Proceedings (OSTI)

    In recent years, long-range ultrasonic guided wave technology has been emerging as a quick and economical method of obtaining a comprehensive view of the condition of piping systems, tubing, and other components (including areas that are difficult to access) by launching and detecting waves from a remote accessible location. This report describes how ultrasonic guided waves can be applied for various components and systems. Guidance on surface preparation, generation of various wave modes, and interpreta...

    2005-03-21T23:59:59.000Z

    225

    Mainstreaming Climate Change Adaptation into Development Planning: A Guide  

    Open Energy Info (EERE)

    Mainstreaming Climate Change Adaptation into Development Planning: A Guide Mainstreaming Climate Change Adaptation into Development Planning: A Guide for Practitioners Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Mainstreaming Climate Change Adaptation into Development Planning: A Guide for Practitioners Agency/Company /Organization: United Nations Environment Programme (UNEP) Sector: Climate Focus Area: Economic Development Topics: Co-benefits assessment, Pathways analysis Resource Type: Guide/manual Website: www.unpei.org/component/docman/doc_download/79-pei-mainstreaming-clima Cost: Free Mainstreaming Climate Change Adaptation into Development Planning: A Guide for Practitioners Screenshot References: Mainstreaming Climate Change Adaptation into Development Planning: A Guide for Practitioners[1] Logo: Mainstreaming Climate Change Adaptation into Development Planning: A Guide for Practitioners

    226

    ATLAS Tags Web Service calls Athena via Athenaeum Framework  

    E-Print Network (OSTI)

    High Energy Physics experiments start using a Web Service style application to access functionality of their main frameworks. Those frameworks, however, are not ready to be executed in a standard Web Service environment as frameworks are too complex, monolithic and use non-standard and non-portable technologies. ATLAS Tag Browser is one of those Web Service. To provide the possibility to extract full ATLAS events from the standard Web Service, we need to access to full ATLAS offline framework - Athena. As Athena cannot run directly within any Web Service, the client server approach has been chosen. Web Service calls Athena remotely over XML-RPC connection using Athenaeum framework. The paper will discuss integration of Athenaeum framework with ATLAS Tag database service, its distributed deployment, monitoring and performance.

    Hrivnac, J; The ATLAS collaboration

    2010-01-01T23:59:59.000Z

    227

    Ultra Wide Band RFID Neutron Tags for Nuclear Materials Monitoring  

    SciTech Connect

    Recent advancements in the ultra-wide band Radio Frequency Identification (RFID) technology and solid state pillar type neutron detectors have enabled us to move forward in combining both technologies for advanced neutron monitoring. The LLNL RFID tag is totally passive and will operate indefinitely without the need for batteries. The tag is compact, can be directly mounted on metal, and has high performance in dense and cluttered environments. The LLNL coin-sized pillar solid state neutron detector has achieved a thermal neutron detection efficiency of 20% and neutron/gamma discrimination of 1E5. These performance values are comparable to a fieldable {sup 3}He based detector. In this paper we will discuss features about the two technologies and some potential applications for the advanced safeguarding of nuclear materials.

    Nekoogar, F; Dowla, F; Wang, T

    2010-01-27T23:59:59.000Z

    228

    Identification of Fissionable Materials Using the Tagged Neutron Technique  

    Science Conference Proceedings (OSTI)

    This summary describes experiments to detect and identify fissionable materials using the tagged neutron technique. The objective of this work is to enhance homeland security capability to find fissionable material that may be smuggled inside shipping boxes, containers, or vehicles. The technique distinguishes depleted uranium from lead, steel, and tungsten. Future work involves optimizing the technique to increase the count rate by many orders of magnitude and to build in the additional capability to image hidden fissionable materials. The tagged neutron approach is very different to other techniques based on neutron die-away or photo-fission. This work builds on the development of the Associated Particle Imaging (API) technique at the Special Technologies Laboratory (STL) [1]. Similar investigations have been performed by teams at the Oak Ridge National Laboratory (ORNL), the Khlopin Radium Institute in Russia, and by the EURITRACK collaboration in the European Union [2,3,4].

    R.P. Keegan, J.P. Hurley, J.R. Tinsley, R. Trainham

    2009-06-30T23:59:59.000Z

    229

    A Novel Source of Tagged Low-Energy Nuclear Recoils  

    E-Print Network (OSTI)

    For sufficiently wide resonances, nuclear resonance fluorescence behaves like elastic photo-nuclear scattering while retaining the large cross-section characteristic of resonant photo-nuclear absorption. We show that NRF may be used to characterize the signals produced by low-energy nuclear recoils by serving as a novel source of tagged low-energy nuclear recoils. Understanding these signals is important in determining the sensitivity of direct WIMP dark-matter and coherent neutrino-nucleus scattering searches.

    Joshi, Tenzing H Y

    2011-01-01T23:59:59.000Z

    230

    USNRC REGULATORY GUIDES  

    E-Print Network (OSTI)

    Regulatory Guides are issued to describe and make available to the public methods acceptable to the NRC staff of implementing specific parts of the Commission's regulations, to delineate tech niques used by the staff in evaluating specific problems or postu lated accidents or to provide guidance to applicants. Regulatory Guides are not substitutes for regulations, and compliance with them is not required. Methods and solutions different from those set out in the guides will be acceptable If they provide a basis for the findings requisite to the Issuance or continuance of a permit or license by the Commission. This guide was issued after consideration of comments received from the public. Comments and suggestions for improvements in these guides are encouraged at all times, and guides will be revised, as appropriate, to accommodate comments and to reflect new Informa tion or experience. Comments should be sent to the Secretary of the Commission,

    unknown authors

    1982-01-01T23:59:59.000Z

    231

    Field Guide: Daytime Discharge Inspection of Transmission and Distribution Overhead Lines and Substations – Guide with Video  

    Science Conference Proceedings (OSTI)

    This EPRI visual guide, one of a series of field guides designed to support inspection and assessment of transmission components, is devoted to the subject of daytime discharge inspection. Although technology for viewing corona and arcing discharges during the day has been available for a number of years, it can be rather difficult to interpret the images produced by this technology. This systematically organized document was prepared to help overcome some of these difficulties. It is intended for ...

    2013-01-31T23:59:59.000Z

    232

    Advanced Energy Guides  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Energy Guides Energy Guides Shanti Pless National Renewable Energy Laboratory shanti.pless@nrel.gov 303-384-6365 April 4 2013 2 | Building Technologies Office eere.energy.gov Advanced Energy Design Guides Provide prescriptive energy savings guidance and recommendations by building type and geographic location: * Design packages and strategies to help owners and designers achieve 50% site energy savings over Standard 90.1 * Two series: - 30% savings over 90.1-1999

    233

    Advanced Energy Guides  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Energy Guides Energy Guides Shanti Pless National Renewable Energy Laboratory shanti.pless@nrel.gov 303-384-6365 April 4 2013 2 | Building Technologies Office eere.energy.gov Advanced Energy Design Guides Provide prescriptive energy savings guidance and recommendations by building type and geographic location: * Design packages and strategies to help owners and designers achieve 50% site energy savings over Standard 90.1 * Two series: - 30% savings over 90.1-1999

    234

    COMcheck Software User's Guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    COMcheck Software User's Guide for 90.1-2004 and 90.1-2007 Building Energy Codes Program Table Of Contents Overview ......

    235

    Energy guides | ENERGY STAR  

    NLE Websites -- All DOE Office Websites (Extended Search)

    track, and benchmark Improve energy performance ENERGY STAR industrial partnership Energy guides Energy efficiency and air regulation Plant energy auditing Industrial...

    236

    Alternative Financing - New Acquisition Guide Subchapter | Department...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Alternative Financing - New Acquisition Guide Subchapter Alternative Financing - New Acquisition Guide Subchapter policy flash Alternative Financing - New Acquisition Guide...

    237

    Site Management Guide | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    here Home Site Management Guide Site Management Guide Site Management Guide (Blue Book) (Revision 14, December 2012) Site Management Guide More Documents & Publications...

    238

    OPAM Policy Acquisition Guides | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    OPAM Policy Acquisition Guides OPAM Policy Acquisition Guides Acquisition Guides OPAM Policy Acquisition Guides More Documents & Publications Chapter 31 - Contract Cost Principles...

    239

    OPAM Policy Acquisition Guides | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    OPAM Policy Acquisition Guides OPAM Policy Acquisition Guides Acquisition Guides OPAM Policy Acquisition Guides More Documents & Publications Chapter 26 - Other Socioeconomic...

    240

    OPAM Policy Acquisition Guides | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    OPAM Policy Acquisition Guides OPAM Policy Acquisition Guides Acquisition Guides OPAM Policy Acquisition Guides More Documents & Publications PolFlash10-31attach2.pdf OPAM Policy...

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    241

    OPAM Policy Acquisition Guides | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    OPAM Policy Acquisition Guides OPAM Policy Acquisition Guides Acquisition Guides OPAM Policy Acquisition Guides More Documents & Publications Acquisition, Use, and Disposal of Real...

    242

    OPAM Policy Acquisition Guides | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    OPAM Policy Acquisition Guides OPAM Policy Acquisition Guides Acquisition Guides OPAM Policy Acquisition Guides More Documents & Publications Chapter 1 - Acquisition Regulations...

    243

    EERE Program Management Guide- About the Program Management Guide  

    Energy.gov (U.S. Department of Energy (DOE))

    The Introduction describes the need for an Operator’s Guide, provides information on content and the relationship between the guide and the EERE Program Management Initiative, and provides information on how to use the guide.

    244

    Guide to natural gas cogeneration  

    Science Conference Proceedings (OSTI)

    This user-oriented guide contains expert commentary and details on both the engineering and economic aspects of gas-fired cogeneration systems. In this completely undated second edition, is a thorough examination of equipment considerations and applications strategies for gas engines, gas turbines, steam engines, and electrical switch-gear. Clear guidelines show how to select the prime mover which is best suited for a specific type of application. It describes which methods have proven most effective for utilizing recoverable heat, how to determine total installed capacity, and how to calculate the required standby capacity. The second edition provides an assessment of recent technological developments. A variety of case studies guide through all types of natural gas cogeneration applications, including both commercial and industrial, as well as packaged systems for restaurants and hospitals. Drawing upon the expertise of numerous authorities from the American Gas Association, this fully illustrated guide will serve as a valuable reference for planning or implementing a natural gas-fired cogeneration project.

    Hay, N.E. (ed.)

    1992-01-01T23:59:59.000Z

    245

    2010 buyer's guide  

    Science Conference Proceedings (OSTI)

    This annual buyers' guide provides a resource for identifying the companies that provide the products and services required in the power generation industry. It is divided into 3 sections, namely products, services and companies. More than 1750 suppliers mostly in the USA are listed in over 400 product categories. The Buyer's Guide is also available online at www.power-eng.com.

    NONE

    2009-12-15T23:59:59.000Z

    246

    Sootblowing Maintenance Guide  

    Science Conference Proceedings (OSTI)

    This guide provides information concerning good maintenance practices, condition monitoring, predictive and preventive techniques, probable failure modes, and troubleshooting guidance to personnel involved in the maintenance of sootblowing systems and their components. This guide was developed to provide basic information as well as detailed maintenance and troubleshooting information.

    2001-12-20T23:59:59.000Z

    247

    SO3 Mitigation Guide Update  

    Science Conference Proceedings (OSTI)

    This report is an updated guide for control of gas phase sulfuric acid emissions. The guide updates overviews of available control processes and covers new processes. In addition, the guide summarizes process economics and includes a cost worksheet calculation methodology.

    2004-03-15T23:59:59.000Z

    248

    UESC Contracting Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Contracting Guide Contracting Guide Karen Thomas National Renewable Energy Laboratory Purpose of the UESC Guide * The UESC Contracting Guide will include: - Information, sample documents, and templates needed to implement a task order under the GSA Areawide * FEMP is developing this initial guide for DOE sites * Subsequent books will be developed for other agencies as requested Objectives * Define UESC * Provide the steps involved in developing a UESC * Provide objectives, strategies, samples, and templates * Provide best practices and lessons learned Frequently Asked Questions * What is a UESC? * Is it legal? * What is the maximum allowable contract term? * Can renewables be included in a UESC? * Can rebates be accepted and used in the project? * What is a utility?

    249

    Economic Evaluation Guide for alternative transportation fuels  

    DOE Green Energy (OSTI)

    The production of this Economic Evaluation Guide is one activity of AVFCAP. The guide is intended for use by project managers and fleet operators in the public sector. Public fleets have been identified as one of the most likely areas where ATFs will first gain widespread use, because of existing and impending state and federal legislative mandates, as well as for practical reasons such as centralized servicing and refueling. The purpose of this guide is to provide balanced decision-support information to project managers who are considering conducting, or currently managing, ATF demonstration programs. Information for this guide was gathered as part of a related AVFCAP activity, the development of an Information Resource Database. Economic issues related to the development and implementation of ATF programs at the local government level are extremely complex, and require an analysis of federal policies and national and international economics that is generally beyond the scope of local government project managers. The intent of this guide is to examine the information available on the economic evaluation of ATFs, and identify key elements that will help local governments realistically assess the potential costs and savings of an ATF program. The guide also discusses how these various economic factors are related, and how local government priorities affect how different factors are weighed.

    de Percin, D.; Werner, J.F. Jr.

    1992-12-31T23:59:59.000Z

    250

    Economic Evaluation Guide for alternative transportation fuels  

    DOE Green Energy (OSTI)

    The production of this Economic Evaluation Guide is one activity of AVFCAP. The guide is intended for use by project managers and fleet operators in the public sector. Public fleets have been identified as one of the most likely areas where ATFs will first gain widespread use, because of existing and impending state and federal legislative mandates, as well as for practical reasons such as centralized servicing and refueling. The purpose of this guide is to provide balanced decision-support information to project managers who are considering conducting, or currently managing, ATF demonstration programs. Information for this guide was gathered as part of a related AVFCAP activity, the development of an Information Resource Database. Economic issues related to the development and implementation of ATF programs at the local government level are extremely complex, and require an analysis of federal policies and national and international economics that is generally beyond the scope of local government project managers. The intent of this guide is to examine the information available on the economic evaluation of ATFs, and identify key elements that will help local governments realistically assess the potential costs and savings of an ATF program. The guide also discusses how these various economic factors are related, and how local government priorities affect how different factors are weighed.

    de Percin, D.; Werner, J.F. Jr.

    1992-01-01T23:59:59.000Z

    251

    ATLAS Tags Web Service calls Athena via Athenaeum Framework  

    E-Print Network (OSTI)

    High Energy Physics experiments start using a Web Service style application to access functionality of their main frameworks. Those frameworks, however, are not ready to be executed in a standard Web Service environment as frameworks are too complex, monolithic and use non-standard and non-portable technologies. ATLAS Tag Browser is one of those Web Service. To provide the possibility to extract full ATLAS events from the standard Web Service, we need to access to full ATLAS offline framework - Athena. As Athena cannot run directly within any Web Service, the client server approach has been chosen. Web Service calls Athena remotely over XML-RPC connection using Athenaeum framework.

    Hrivnac, J; The ATLAS collaboration

    2011-01-01T23:59:59.000Z

    252

    Format and Content Guide for DOE Low-Level Waste Disposal Facility  

    Energy.gov (U.S. Department of Energy (DOE))

    Format and Content Guide for U.S. Department of Energy Low-Level Waste Disposal Facility Performance Assessments and Composite Analyses

    253

    UTag: Long-range Ultra-wideband Passive Radio Frequency Tags  

    SciTech Connect

    Long-range, ultra-wideband (UWB), passive radio frequency (RF) tags are key components in Radio Frequency IDentification (RFID) system that will revolutionize inventory control and tracking applications. Unlike conventional, battery-operated (active) RFID tags, LLNL's small UWB tags, called 'UTag', operate at long range (up to 20 meters) in harsh, cluttered environments. Because they are battery-less (that is, passive), they have practically infinite lifetimes without human intervention, and they are lower in cost to manufacture and maintain than active RFID tags. These robust, energy-efficient passive tags are remotely powered by UWB radio signals, which are much more difficult to detect, intercept, and jam than conventional narrowband frequencies. The features of long range, battery-less, and low cost give UTag significant advantage over other existing RFID tags.

    Dowla, F

    2007-03-14T23:59:59.000Z

    254

    UTag: Long-range Ultra-wideband Passive Radio Frequency Tags  

    SciTech Connect

    Long-range, ultra-wideband (UWB), passive radio frequency (RF) tags are key components in Radio Frequency IDentification (RFID) system that will revolutionize inventory control and tracking applications. Unlike conventional, battery-operated (active) RFID tags, LLNL's small UWB tags, called 'UTag', operate at long range (up to 20 meters) in harsh, cluttered environments. Because they are battery-less (that is, passive), they have practically infinite lifetimes without human intervention, and they are lower in cost to manufacture and maintain than active RFID tags. These robust, energy-efficient passive tags are remotely powered by UWB radio signals, which are much more difficult to detect, intercept, and jam than conventional narrowband frequencies. The features of long range, battery-less, and low cost give UTag significant advantage over other existing RFID tags.

    Dowla, F

    2007-03-14T23:59:59.000Z

    255

    Guide to Integrating Renewable Energy in Federal Construction: Operations  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Operations and Maintenance to someone by E-mail Operations and Maintenance to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Operations and Maintenance on Facebook Tweet about Guide to Integrating Renewable Energy in Federal Construction: Operations and Maintenance on Twitter Bookmark Guide to Integrating Renewable Energy in Federal Construction: Operations and Maintenance on Google Bookmark Guide to Integrating Renewable Energy in Federal Construction: Operations and Maintenance on Delicious Rank Guide to Integrating Renewable Energy in Federal Construction: Operations and Maintenance on Digg Find More places to share Guide to Integrating Renewable Energy in Federal Construction: Operations and Maintenance on AddThis.com... Home Introduction Assessing Renewable Energy Options

    256

    Guide to Integrating Renewable Energy in Federal Construction: Building  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Building Design to someone by E-mail Building Design to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Building Design on Facebook Tweet about Guide to Integrating Renewable Energy in Federal Construction: Building Design on Twitter Bookmark Guide to Integrating Renewable Energy in Federal Construction: Building Design on Google Bookmark Guide to Integrating Renewable Energy in Federal Construction: Building Design on Delicious Rank Guide to Integrating Renewable Energy in Federal Construction: Building Design on Digg Find More places to share Guide to Integrating Renewable Energy in Federal Construction: Building Design on AddThis.com... Home Introduction Assessing Renewable Energy Options Planning, Programming, & Budgeting Project Funding Building Design

    257

    Retrievable exploration guide base/completion guide base system  

    SciTech Connect

    A system is described for converting a subsea exploratory well into a production well. The well includes a temporary guide base located subsea with guide lines extending to the water surface and a central opening through which drilling operations are conducted. A method of converting a subsea exploratory well into a production well is described comprising the steps of: locating a temporary guide base on a subsea mud line, providing a permanent guide base in two parts latched together, providing a wellhead housing with an external latching profile and assembling the two parts of the permanent guide base and the wellhead housing together and lowering the assembly onto the temporary guide base, releasing part of the permanent guide base leaving the second part of the permanent guide base and the wellhead housing subsea, providing a completion guide base with equipment for producing from the well and lowering the completion guide base on to the temporary guide base.

    Hed, J.E.; Draper, R.B.

    1986-09-16T23:59:59.000Z

    258

    LANL Credit Card Payments Guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Page 1 LANL Credit Card Payments Guide This guide provides instructions for making online credit card payments to Los Alamos National Laboratory. If you are a LANL employee...

    259

    Juvenile Salmonid Pit-Tag Studies at Prosser Dam and the Chandler Canal Fish Collection Facility, Yakima River, 1991 and 1992 Final Report.  

    DOE Green Energy (OSTI)

    In 1991 and 1992, the National Marine Fisheries Service completed the second and third years of a 3-year study to estimate juvenile salmonid (Oncorhynchus spp.) timing and survival characteristics related to passage through the Prosser Dam complex, including the Chandler Canal and the Chandler fish collection facility, on the Yakima River. Yearling chinook (O. tshawyacha) and coho salmon (O. kisutch) were collected at the Chandler facility, PIT tagged, and released at various locations in the Yakima River, Chandler Canal, and the Chandler facility. Individual fish were subsequently detected at PIT-tag detection monitors at the Chandler facility and/or McNary Dam on the Columbia River. Survival through various reaches, PIT-tag detection efficiency, and Chandler Canal fish entrainment proportion parameters were estimated using maximum likelihood techniques. The research objectives in 1991 and 1992 were to: (1) assess the effects of passage through the Chandler Canal and the Chandler facility on the survival of juvenile salmonids, (2) determine the entrainment rate of juvenile salmonids into the Chandler Canal as a function of river flow, and (3) determine the efficiency and reliability of the PIT-tag monitoring system at the Chandler facility. The initial 1990 research plan was expanded in 1991 and 1992 to include several more release locations and many more release days.

    Ruehle, Thomas E.; Sandford, Benjamin P.

    1996-01-01T23:59:59.000Z

    260

    Backfit Analysis Desktop Guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    G 231.1-2 G 231.1-2 Approved: 08-20-03 OCCURRENCE REPORTING CAUSAL ANALYSIS GUIDE [This Guide describes suggested nonmandatory approaches for meeting requirements. Guides are not requirements documents and are not to be construed as requirements in any audit or appraisal for compliance with the parent Policy, Order, Notice, or Manual.] U.S. DEPARTMENT OF ENERGY Office of Environment, Safety and Health DISTRIBUTION: INITIATED BY: All Departmental Elements Office of Environment, Safety and Health DOE G 231.1-2 Page i 08-20-03 CONTENTS 1. PURPOSE ............................................................................................................................1 2. REFERENCES ....................................................................................................................1

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    261

    UniGuide: vers un guide dynamique pour Unistroke  

    Science Conference Proceedings (OSTI)

    UniGuide is a support system to use the Unistroke gesture keyboard. It is based on dynamic guides to help the user to perform the gesture associated with the character he wants. To enhance the visual feedback, the guides are spread over several pages ... Keywords: dynamic guides, text entry, unistroke

    Jérémy Thimont; Benoît Martin

    2010-09-01T23:59:59.000Z

    262

    Relationship between Frequency of RFID Tags and Its Ability to Penetrate Fresh Concrete  

    E-Print Network (OSTI)

    The concrete maturity method can be utilized to determine in situ strength of concrete. It uses the temperature of concrete to determine a maturity index that can then be used to determine strength of concrete. However, monitoring the concrete temperature using thermocouples brings up a wiring issue, which is not advisable in an equipment and human intensive area like a construction site. One of the ways to get around this wiring issue is to use Radio Frequency Identification (RFID) technology, which is capable of transmitting information wirelessly. Previous research implemented using ultra high frequency RFID tags embedded in fresh concrete found that water could be the impediment for transmitting RFID signal from within concrete during early stages of curing. From literature it was found that lower the frequency, better the chances of the wave penetrating water. The objective of the research was to figure out whether the frequency of RFID tags has any relationship with the readability of RFID tags embedded in fresh concrete. For this investigation, low frequency, high frequency, and ultra high frequency RFID tags were tested within fresh concrete to see any difference between tags in terms of transmitting information. This experiment was carried out in a controlled space to reduce the number of variables affecting the experiment outcome. The low frequency, high frequency, and ultra high frequency RFID tags were placed within 2 in x 3 in x 2 in wooden formwork at a depth of 4 in, 8 in, and 12 in. Ready mix concrete was poured into the formwork and 3 concrete cubes were cast with the tags embedded within them. Readers that could be connected to a laptop were used to monitor and collect the time at which these RFID tags can be detected. The test showed that the RFID signals from the low frequency tags at all depths were detected as soon as concrete was poured. The Ultra High Frequency tags placed at the 4" level could be detected 15 minutes after concrete was poured. The UHF tags at the 8" level could be detected after 30 minutes. The UHF tags at the 12" level took on an average 2 hours to be detected from the vicinity of the formwork. The greater the depth at which the ultra high frequency tag was buried the longer it took for it to be detected. The high frequency tags could be detected only at the 4" level. The reason the performance of the HF card degraded in concrete could be because it uses an aluminum foil antenna which is more susceptible to the environment changing the relative permeability. A copper wire antenna could have fared better in this condition, increasing the chances of detecting the tag. Moreover a passive tag was used. The read range and chances of detection could have been increased had an active tag been used. The power of the reader that was used was also very less which might have contributed to the tag not being detected. Among the tags that were used in the experiment it was found that low frequency tags was the tag that could be detected the earliest after concrete was poured into the forms. However, the maximum read range of the tag observed in the experiment was 20" which is too small a distance to be used on an actual construction site.

    Sridharan, Rajasekaran

    2010-05-01T23:59:59.000Z

    263

    DUF6 Guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    DUF6 Guide DUF6 Guide Depleted UF6 Guide An introduction to uranium and its compounds, depleted uranium, and depleted uranium hexafluoride (depleted UF6). Uranium has unique properties that make it valuable as an energy source, yet potentially hazardous to human health and the environment. The Guide provides basic information about the properties of uranium compounds and the uranium enrichment process that produces depleted UF6. This information will help you understand the unique challenges involved in managing DOE's inventory of depleted UF6 in a safe and efficient manner. Overview Presentation DUF6 Health Risks Uranium and Its Compounds DUF6 Environmental Risks Depleted Uranium DUF6 Videos Uranium Hexafluoride Uranium Quick Facts DUF6 Production and Handling

    264

    Help Guide for Applicants  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Careers at Brookhaven 1 Careers at Brookhaven 1 October 2012 Careers at Brookhaven Help Guide for Applicants Table of Contents Brookhaven National Laboratory ................................................................................... 2 Careers at Brookhaven ..................................................................................................... 2 Careers Home Page ........................................................................................................... 3 Latest Job Postings ........................................................................................................... 5 Register to Login ............................................................................................................... 8

    265

    DOE Mentoring Program Guide  

    Energy.gov (U.S. Department of Energy (DOE))

    If you are interested in continuous learning and self-development, the DOE Mentoring Program is for you. This guide will provide you with general information regarding mentoring at DOE. Learning...

    266

    1998 Fuel Economy Guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    purpose vehicles (2-wheel drive and 4-wheel drive). By using this Guide consumers can estimate the average yearly fuel cost for any vehicle. The mileage figures included in...

    267

    Static Seals Maintenance Guide  

    Science Conference Proceedings (OSTI)

    This guide provides comprehensive technical information on the understanding and maintenance of static seals. It is designed to help utility staffs maintain static seals and minimize and trouble shoot leakage problems that can reduce plant availability.

    1994-09-22T23:59:59.000Z

    268

    Utility Brownfields Resource Guide  

    Science Conference Proceedings (OSTI)

    EPRI has established a program designed to assist utilities wishing to participate in local Brownfields redevelopment projects. EPRI developed this Brownfields guide to educate utility economic and real estate development personnel in identifying, screening, and supporting Brownfields projects.

    1998-12-18T23:59:59.000Z

    269

    REScheck Software User's Guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    REScheck Software REScheck Software User's Guide Building Energy Codes Program Table Of Contents Overview ................................................................................... 1 Tutorials ................................................................................. 2 Table Columns and Rows ............................................................. 3 Rows ...................................................................................... 3 Columns ................................................................................. 5 Project Information ..................................................................... 7 Location.................................................................................. 7 Project Type (2006 IECC) ..........................................................

    270

    Security guide for subcontractors  

    Science Conference Proceedings (OSTI)

    This security guide of the Department of Energy covers contractor and subcontractor access to DOE and Mound facilities. The topics of the security guide include responsibilities, physical barriers, personnel identification system, personnel and vehicular access controls, classified document control, protecting classified matter in use, storing classified matter repository combinations, violations, security education clearance terminations, security infractions, classified information nondisclosure agreement, personnel security clearances, visitor control, travel to communist-controlled or sensitive countries, shipment security, and surreptitious listening devices.

    Adams, R.C.

    1991-01-01T23:59:59.000Z

    271

    Cooling Plant Optimization Guide  

    Science Conference Proceedings (OSTI)

    Central cooling plants or district cooling systems account for 22 percent of energy costs for cooling commercial buildings. Improving the efficiency of central cooling plants will significantly impact peak demand and energy usage for both building owners and utilities. This guide identifies opportunities for optimizing a central cooling plant and provides a simplified optimization procedure. The guide focuses on plant optimization from the standpoint of minimizing energy costs and maximizing efficiencies...

    1998-09-29T23:59:59.000Z

    272

    Wind Energy Teachers Guide  

    DOE Green Energy (OSTI)

    This guide, created by the American Wind Association, with support from the U.S. Department of Energy, is a learning tool about wind energy targeted toward grades K-12. The guide provides teacher information, ideas for sparking children's and students' interest, suggestions for activities to undertake in and outside the classroom, and research tools for both teachers and students. Also included is an additional resources section.

    anon.

    2003-01-01T23:59:59.000Z

    273

    Diesel Engine Analysis Guide  

    Science Conference Proceedings (OSTI)

    This guide provides a thorough background on diesel engine analysis including combustion, vibration, and ultrasonic analysis theory. Interpretation of results is also provided. This guide is intended to enable nuclear utility personnel to make informed decisions regarding the nature and use of diesel engine analysis, including how to set up an effective program, how to establish analysis guidelines, how to make use of the resulting data to plan maintenance, determine the causes of off-design operating co...

    1997-10-09T23:59:59.000Z

    274

    A Citizen's Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Citizen's Guide Citizen's Guide to the NEPA Having Your Voice Heard d e c e m b e r 2 0 0 7 c o u n c i l o n e n v i r o n m e n t a l q u a l i t y e x e c u t i v e o f f i c e o f t h e p r e s i d e n t A Citizen's Guide to the NEPA Having Your Voice Heard d e c e m b e r 2 0 0 7 c o u n c i l o n e n v i r o n m e n t a l q u a l i t y e x e c u t i v e o f f i c e o f t h e p r e s i d e n t This guide is based on research and consultations undertaken by the Council on Environmental Quality (CEQ) concerning the need for a Citizen's Guide to the National Environmental Policy Act (NEPA). Participants in the NEPA Regional Roundtables held in 2003-2004 clearly voiced the need for an guide that provides an explanation of NEPA, how it is implemented, and how people outside the Federal government - individual citizens, private sector applicants, members of organized groups, or representatives of Tribal, State,

    275

    Radiological design guide  

    SciTech Connect

    The purpose of this design guide is to provide radiological safety requirements, standards, and information necessary for designing facilities that will operate without unacceptable risk to personnel, the public, or the environment as required by the US Department of Energy (DOE). This design guide, together with WHC-CM-4-29, Nuclear Criticality Safety, WHC-CM-4-46, Nonreactor Facility Safety Analysis, and WHC-CM-7-5, Environmental Compliance, covers the radiation safety design requirements at Westinghouse Hanford Company (WHC). This design guide applies to the design of all new facilities. The WHC organization with line responsibility for design shall determine to what extent this design guide shall apply to the modifications to existing facilities. In making this determination, consideration shall include a cost versus benefit study. Specifically, facilities that store, handle, or process radioactive materials will be covered. This design guide replaces WHC-CM-4-9 and is designated a living document. This design guide is intended for design purposes only. Design criteria are different from operational criteria and often more stringent. Criteria that might be acceptable for operations might not be adequate for design.

    Evans, R.A.

    1994-08-16T23:59:59.000Z

    276

    Content-based and collaborative techniques for tag recommendation: an empirical evaluation  

    Science Conference Proceedings (OSTI)

    The rapid growth of the so-called Web 2.0 has changed the surfers' behavior. A new democratic vision emerged, in which users can actively contribute to the evolution of the Web by producing new content or enriching the existing one with user generated ... Keywords: Collaborative tagging, Folksonomies, Recommender systems, Tag recommendation, Web 2.0

    Pasquale Lops; Marco De Gemmis; Giovanni Semeraro; Cataldo Musto; Fedelucio Narducci

    2013-02-01T23:59:59.000Z

    277

    Challenges in the design of a GNSS ear tag for feedlot cattle  

    Science Conference Proceedings (OSTI)

    A Global Navigation Satellite System (GNSS) based ear tag was designed developed and tested for use on cattle in feedlots. Previous research by others has primarily used GNSS collars; however the widespread use of a Position, Velocity and Time (PVT) ... Keywords: Ear tag, Feedlot, GNSS, GPS, Livestock health, Low-power, Wireless sensor network

    J. B. Schleppe; G. Lachapelle; C. W. Booker; T. Pittman

    2010-01-01T23:59:59.000Z

    278

    Annual Coded Wire Tag Program; Oregon Missing Production Groups, 1994 Annual Report.  

    DOE Green Energy (OSTI)

    The goal of this program is to develop the ability to estimate hatchery production survival values and evaluate effectiveness of Oregon hatcheries. To accomplish this goal. We are tagging missing production groups within hatcheries to assure each production group is identifiable to allow future evaluation upon recovery of tag data.

    Garrison, Robert L.; Isaac, Dennis L.; Lewis, Mark A.

    1994-12-01T23:59:59.000Z

    279

    Tag: Employees & Retirees | Y-12 National Security Complex  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Employees & ... Employees & ... Tag: Employees & Retirees Displaying 1 - 10 of 31... Category: Employees & Retirees "Cook"ing at Y-12 for 70 years We have an enduring mission. Y-12 plays a key role in it. And a nuclear deterrent remains the ultimate insurance policy for America. More... Category: Employees & Retirees Red light, green light Even in the face of a furlough, we were thorough, professional and kept an eye on safety and security. More... Category: Employees & Retirees Young Innovators' Society Awesome Eyeballs visit Y-12 Tweens spawn ingenious mercury experiment. More... Category: Employees & Retirees United Way Campaign Kick-Off Lady Vols head coach Holly Warlick helps Y-2 kick off the 2013 United Way campaign. More... Category: Employees & Retirees

    280

    Tag: nuclear deterrence | Y-12 National Security Complex  

    NLE Websites -- All DOE Office Websites (Extended Search)

    nuclear deterrence nuclear deterrence Tag: nuclear deterrence Displaying 1 - 10 of 31... Category: Employees & Retirees "Cook"ing at Y-12 for 70 years We have an enduring mission. Y-12 plays a key role in it. And a nuclear deterrent remains the ultimate insurance policy for America. More... Category: Employees & Retirees Red light, green light Even in the face of a furlough, we were thorough, professional and kept an eye on safety and security. More... Category: News Uranium at Y-12: Rolling and Forming Rolling involves preheating a uranium or uranium alloy workpiece and passing it through a mill to reduce its thickness. More... Category: News Uranium at Y-12: Heat Treating and Machining Heat treating operations allow uranium to acquire the appropriate mechanical properties.

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    281

    Tag: Naval Reactors | Y-12 National Security Complex  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Naval Reactors Naval Reactors Tag: Naval Reactors Displaying 1 - 7 of 7... Category: Employees & Retirees "Cook"ing at Y-12 for 70 years We have an enduring mission. Y-12 plays a key role in it. And a nuclear deterrent remains the ultimate insurance policy for America. More... Category: News Y-12 Knows Uranium Y-12 produces many forms of uranium. More... Category: News A Rich Resource Requires Recovery Given the value and scarcity of enriched uranium, Y-12 recycles and reuses as much of it as possible. More... Category: News Seawolf Manufacturing Challenge For decades, attack submarines were either fast or quiet - but never both. The fast subs were so loud that an enemy could hear them long before they were within striking distance. More... Category: News Reliable fuel source

    282

    Answer extraction as sequence tagging with tree edit distance  

    E-Print Network (OSTI)

    Our goal is to extract answers from preretrieved sentences for Question Answering (QA). We construct a linear-chain Conditional Random Field based on pairs of questions and their possible answer sentences, learning the association between questions and answer types. This casts answer extraction as an answer sequence tagging problem for the first time, where knowledge of shared structure between question and source sentence is incorporated through features based on Tree Edit Distance (TED). Our model is free of manually created question and answer templates, fast to run (processing 200 QA pairs per second excluding parsing time), and yields an F1 of 63.3 % on a new public dataset based on prior TREC QA evaluations. The developed system is open-source, and includes an implementation of the TED model that is state of the art in the task of ranking QA pairs. 1

    Xuchen Yao; Benjamin Van Durme; Chris Callison-burch; Peter Clark

    2013-01-01T23:59:59.000Z

    283

    Tag: Global Security | Y-12 National Security Complex  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Global Security Global Security Tag: Global Security Displaying 1 - 10 of 61... Category: Global Security Ultrasonic cleaner cuts costs, enhances safety The process of upgrading an old cleaning unit revealed how things were once done and the advances that have followed. More... Category: Global Security Well Logging Security Initiatives GTRI demonstrates the threat to the security of (oil) well logging systems and outlines the initiatives that are enhancing the security of these sources worldwide. More... Category: Global Security Y-12 Receives Two R&D 100 Awards Engineers at the National Nuclear Security Administration's Y-12 National Security Complex have won two R&D 100 Awards. More... Category: Global Security Y-12 researchers garner R&D 100 awards A research chemist and his revolutionary cloth invented to clean surfaces

    284

    DRAFT DO NOT CITE OR DISTRIBUTE -INITIAL COMPILATION OF INFORMATION PRESENTED TO DATE TO IDENTIFY INFORMATION GAPS Acoustic Genetic Markers (PBT) Genetic Markers (GSI) Pit Tags Coded Wire tags  

    E-Print Network (OSTI)

    acoustic tag tracking. Progeny databases for tracking sample and genetic data. IDFG and other agencies maintains performance in saline environments. Acoustic tag tracking requires smaller sample sizes to produce

    285

    Juvenile Radio-Tag Study: Lower Granite Dam, 1985-1986 Final Report.  

    DOE Green Energy (OSTI)

    A prototype juvenile radio-tag system was developed and tested by the National Marine Fisheries Services (NMFS) and Bonneville Power Administration (BPA) at John Day Dam in 1984. Results indicated that the system could provide acceptable estimates of powerhouse and spillway passage. Research in 1986 continued testing of the tag system to further define its application and limitations. Field work included releases in the forebay and tailrace under a no-spill environment and testing of new systems to improve tag detection. Laboratory tests included the response of the tag in hostile environmental conditions (spillway passage) and the effects of the radio tag on fish buoyancy compensation. This report provides results of the work along with a summarization of the combined 1985--86 field and assumption testing. 12 refs., 10 figs., 8 tabs.

    Giorgi, Albert E.

    1988-03-01T23:59:59.000Z

    286

    Updated Operations Assessment Guideline  

    Science Conference Proceedings (OSTI)

    The Operations Assessment Guideline (OAG) can be used to assess the organization and processes of operations departments. An internal utility team or third party can use this report to guide a team composed of industry experts and members of the assessed utility. This report is an update to EPRI report 1008520, Operations Assessment Guideline, published in March 2005. This improved version includes insights gained after three years of experience with the original report.

    2008-03-25T23:59:59.000Z

    287

    A Study to Determine the Biological Feasibility of a New Fish-Tagging System : Annual Report 1997-1998.  

    DOE Green Energy (OSTI)

    This report covers work done during 1997 and 1998 (FY98) on a project to expand and improve technology for Passive-Integrated-Transponder tags (PIT tags) throughout the Columbia River Basin (CRB).

    Prentice, Earl F.; Downing, S.L.; Nunnallee, E.P.; Peterson, B.W.; Jonasson, B.F.

    1999-07-01T23:59:59.000Z

    288

    Print the Fuel Economy Guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Print the Fuel Economy Guide Print the Fuel Economy Guide 2014 Fuel Economy Guide 2014 Fuel Economy Guide Adobe Acrobat Icon MPG data updated December 19, 2013 The annual fuel cost estimates in the 2008-2014 electronic fuel economy guides are updated weekly to match EIA's current national average prices for gasoline and diesel fuel. Order a printed copy: Order Note that the published guides may not be as up-to-date at the downloadable version. View vehicles from 1984 to the present: Go to Find-a-Car Unlike the annual guides which cover only one model year, Find-a-Car provides the most up-to-date fuel economy information for vehicles from model year 1984 to the present, along with environmental and safety data. Find a Car Developer Tools 2013 Fuel Economy Guide 2013 Fuel Economy Guide Adobe Acrobat Icon

    289

    Corrective Action Tracking System User's Guide | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Corrective Action Tracking System User's Guide Corrective Action Tracking System User's Guide Corrective Action Tracking System User's Guide September 07, 2004 Corrective Action Tracking System (CATS) User's Guide for Direct Web Access The Department of Energy (DOE) Corrective Action Management Program (CAMP) prescribes process requirements and responsibilities for DOE line managers to develop and implement corrective actions to effectively resolve safety findings arising from: Findings as identified by the Office of Independent Oversight and Performance Assurance Environment, Safety and Health and Emergency Management assessments; Judgments of Need as identified by Type A accident investigations: Other sources as directed by the Secretary or Deputy Secretary, including crosscutting safety findings. Corrective Action Tracking System User's Guide

    290

    Corrective Action Tracking System User's Guide | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Corrective Action Tracking System User's Guide Corrective Action Tracking System User's Guide Corrective Action Tracking System User's Guide September 07, 2004 Corrective Action Tracking System (CATS) User's Guide for Direct Web Access The Department of Energy (DOE) Corrective Action Management Program (CAMP) prescribes process requirements and responsibilities for DOE line managers to develop and implement corrective actions to effectively resolve safety findings arising from: Findings as identified by the Office of Independent Oversight and Performance Assurance Environment, Safety and Health and Emergency Management assessments; Judgments of Need as identified by Type A accident investigations: Other sources as directed by the Secretary or Deputy Secretary, including crosscutting safety findings. Corrective Action Tracking System User's Guide

    291

    Cyber Security Evaluations Appraisal Process Guide - April 2008 |  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Cyber Security Evaluations Appraisal Process Guide - April 2008 Cyber Security Evaluations Appraisal Process Guide - April 2008 Cyber Security Evaluations Appraisal Process Guide - April 2008 April 2008 Cyber Security Evaluations Appraisal Process Guide was developed for the purpose of documenting the appraisal approach and techniques specific to evaluations of classified and unclassified cyber security programs throughout DOE. Office of Cyber Security Evaluations Appraisal Process Guide provides additional insight into the Office of Cyber Security Evaluations (HS-62) evaluation approach and processes associated with assessing classified and unclassified cyber security programs. The objective of this document is to establish a standard approach and methodology for conducting cyber security reviews that is well understood by all inspection participants.

    292

    Relocation Guide, Human Resources  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Relocation Information Guide Relocation Information Guide The Human Resources Division is providing this Information Guide to you to help ease the transition of relocating to Long Island. Relocating to a new place can be an exciting as well as stressful time. We have compiled information that can be very helpful with the many issues you may face. You may also seek assistance from the recruiter you work with in Human Resources. Service Disclaimer - This web page contains links to other Internet sites. These links are not endorsements of any products or services and no information in such site has been endorsed or approved by Brookhaven National Laboratory or the Human Resources Division. Here are some of the issues: Cost of living Buying or renting a home Schools in the area

    293

    Alternative FInance Guide | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Alternative FInance Guide Alternative FInance Guide AlternativeFinancingGuide.pdf More Documents & Publications Sample Project Execution Plan 2013 Annual Planning Summary for the...

    294

    FAQS Reference Guide - Transportation and Traffic Management...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    FAQS Reference Guide - Transportation and Traffic Management FAQS Reference Guide - Transportation and Traffic Management This reference guide addresses the competency statements...

    295

    Energy Efficiency Program Impact Evaluation Guide | Department...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Efficiency Program Impact Evaluation Guide Energy Efficiency Program Impact Evaluation Guide This Energy Efficiency Program Impact Evaluation Guide describes and provides guidance...

    296

    Design and Characterization of a Novel Battery-less, Solar Powered Wireless Tag for Enhanced-Range  

    E-Print Network (OSTI)

    Design and Characterization of a Novel Battery-less, Solar Powered Wireless Tag for Enhanced.Vyas@gatech.edu Abstract-- In this paper, a novel wireless "Battery-less Solar Powered Wireless Tag" with an enhanced range" and "ubiquitous wireless networks". This paper introduces a novel battery-less solar powered wireless tag

    Tentzeris, Manos

    297

    Fuel Guide Economy  

    NLE Websites -- All DOE Office Websites (Extended Search)

    1 1 MODEL YEAR 2000 FUEL ECONOMY LEADERS IN POPULAR VEHICLE CLASSES Listed below are the vehicles with the highest fuel economy for the most popular classes, including both automatic and manual transmissions and gasoline and diesel vehicles. Please be aware that many of these vehicles come in a range of engine sizes and trim lines, resulting in different fuel economy values. Check the fuel economy guide or the fuel economy sticker on new vehicles to find the values for a particular version of a vehicle. CONTENTS MODEL YEAR 2000 FUEL ECONOMY LEADERS ................. 1 HOW TO USE THIS GUIDE ..................................................... 2 FUEL ECONOMY AND YOUR ANNUAL FUEL COSTS .......... 3 WHY FUEL ECONOMY IS IMPORTANT .................................

    298

    EIA Writing Style Guide  

    Gasoline and Diesel Fuel Update (EIA)

    EIA Writing Style Guide EIA Writing Style Guide U.S. Energy Information Administration Office of Communications This publication is available on the EIA employee intranet and at: www.eia.gov/eiawritingstyleguide.pdf U.S. government publications are not subject to copyright protection, but you should acknowledge EIA as the source if you use or reproduce this content. November 2012 Contents Introduction .................................................................................................................................................. 1 Quick Tips-Style, Writing, and Grammar Tips ............................................................................................ 5 Chapter 1. Editorial Voice and Words and Phrases To Avoid ....................................................................... 7

    299

    Quality Assurance REFERENCE GUIDE  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Quality Assurance Quality Assurance Qualification Standard DOE-STD-1150-2002 July 2012 Reference Guide The Functional Area Qualification Standard References Guides are developed to assist operators, maintenance personnel, and the technical staff in the acquisition of technical competence and qualification within the Technical Qualification Program. Please direct your questions or comments related to this document to the Office of Leadership and Career Management, Technical Qualification Program (TQP) Manager, Albuquerque Complex. This page is intentionally blank. Table of Contents i FIGURES ....................................................................................................................................... ii TABLES ........................................................................................................................................ iii

    300

    HVDC Overhead Transmission Guide  

    Science Conference Proceedings (OSTI)

    This report is the initial version of a new EPRI publication, the HVDC Overhead Line Design Guide. The main objective of the report is to present a proposed outline for the guide so that users can review and discuss the content. The outline will then be fine-tuned with users to meet their needs. Topics unique to high-voltage direct current (HVDC) systems have been identified and included in the outline. The topics will be addressed and design information added each year. The ultimate goal ...

    2012-12-12T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    301

    Seismic Safety Guide  

    SciTech Connect

    This guide provides managers with practical guidelines for administering a comprehensive earthquake safety program. The Guide is comprehensive with respect to earthquakes in that it covers the most important aspects of natural hazards, site planning, evaluation and rehabilitation of existing buildings, design of new facilities, operational safety, emergency planning, special considerations related to shielding blocks, non-structural elements, lifelines, fire protection and emergency facilities. Management of risk and liabilities is also covered. Nuclear facilities per se are not dealt with specifically. The principles covered also apply generally to nuclear facilities but the design and construction of such structures are subject to special regulations and legal controls.

    Eagling, D.G. (ed.)

    1983-09-01T23:59:59.000Z

    302

    Sub-grade Corrosion Management Guide  

    Science Conference Proceedings (OSTI)

    Managing subgrade corrosion in steel transmission structures is an ongoing concern of the electric power industry. The inspection, assessment, and maintenance of existing facilities have become increasingly important topics: since transmission construction peaked in the early 70s, many structures are now approaching 40 years of service. This guide to the management of subgrade corrosion reviews the electrochemical mechanisms of corrosion and the properties of steels used in transmission structures and pr...

    2010-12-23T23:59:59.000Z

    303

    Energy Efficiency Technology Readiness Guide: 2013 Update  

    Science Conference Proceedings (OSTI)

    As electric power companies strive to meet increasing end-use energy efficiency requirements, they must make decisions about which technologies seem most promising in terms of availability for wide deployment and providing persistent energy savings while also being cost-effective and likely to be adopted by customers. To help electric power companies with these decisions, EPRI has developed this Technology Readiness Guide to provide a readiness assessment of technologies in various stages of ...

    2013-12-23T23:59:59.000Z

    304

    Instrument guide for MRI-guided percutaneous interventions  

    E-Print Network (OSTI)

    As MRI guided interventions are becoming more widely practiced, the goal of this thesis was to design an instrument guidance device for MRI-guided percutaneous interventions in closed bore systems, namely cryoablation ...

    Chen, Xuefeng, S.B. Massachusetts Institute of Technology

    2010-01-01T23:59:59.000Z

    305

    Coal Study Guide - High School | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Study Guide - High School Coal Study Guide - High School Coal Study Guide - High School More Documents & Publications Coal Study Guide - Middle School Coal Study Guide for...

    306

    B-tagging and the search for neutral supersymmetric Higgs bosons at D0  

    SciTech Connect

    A search for neutral supersymmetric Higgs bosons and work relating to the improvement of the b-tagging and trigger capabilities at the D0 detector during Run II of the Fermilab Tevatron collider is presented. The search for evidence of the Higgs sector in the Standard Model (SM) and supersymmetric extensions of the SM are a high priority for the D0 collaboration, and b-tagging and good triggers are a vital component of these searches. The development and commissioning of the first triggers at D0 which use b-tagging is outlined, along with the development of a new secondary vertex b-tagging tool for use in the Level 3 trigger. Upgrades to the Level 3 trigger hit finding code, which have led to significant improvements in the quality and efficiency of the tracking code, and by extension the b-tagging tools, are also presented. An offline Neural Network (NN) b-tagging tool was developed, trained on Monte Carlo and extensively tested and measured on data. The new b-tagging tool significantly improves the b-tagging performance at D0, for a fixed fake rate relative improvements in signal efficiency range from {approx} 40% to {approx} 15%. Fake rates, for a fixed signal efficiency, are typically reduced to between a quarter and a third of their value. Finally, three versions of the search for neutral supersymmetric Higgs bosons are presented. The latest version of the analysis makes use of almost 1 fb{sup -1} of data, the new NN b-tagger and the new b-tagging triggers, and has set one of the world's best limits on the supersymmetric parameter tan{beta} in the mass range 90 to 150 GeV.

    Scanlon, Tim; /Imperial Coll., London

    2006-10-01T23:59:59.000Z

    307

    Guide to Integrating Renewable Energy in Federal Construction  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Integrating Renewable Energy in Integrating Renewable Energy in Federal Construction Developed by the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP), the "Guide to Integrating Renewable Energy into Federal Construction" helps Federal agencies understand renewable energy options, select appropriate types of renewable energy technologies, and integrate these technologies into all phases of new construction or major renovation projects. This PDF is a printed version of the online guide. This guide is structured to address renewable energy considerations at each stage of the construction process. Renewable Energy Project Funding Assessing Renewable Energy Options Planning, Programming, & Budgeting Building Design Operations & Maintenance Project Construction

    308

    Guide to Integrating Renewable Energy in Federal Construction  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Integrating Renewable Energy in Integrating Renewable Energy in Federal Construction Developed by the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP), the "Guide to Integrating Renewable Energy into Federal Construction" helps Federal agencies understand renewable energy options, select appropriate types of renewable energy technologies, and integrate these technologies into all phases of new construction or major renovation projects. This PDF is a printed version of the online guide. This guide is structured to address renewable energy considerations at each stage of the construction process. Renewable Energy Project Funding Assessing Renewable Energy Options Planning, Programming, & Budgeting Building Design Operations & Maintenance Project Construction

    309

    A Citizen's Guide to the NEPA: Having Your Voice Heard  

    Energy.gov (U.S. Department of Energy (DOE))

    This guide is based on research and consultations undertaken by the Council on Environmental Quality concerning the need for a Citizen’s Guide to the National Environmental Policy Act (NEPA). Participants in NEPA Regional Roundtables held in 2003-2004 clearly voiced the need for an guide that provides an explanation of NEPA, how it is implemented, and how people outside the Federal government — individual citizens, private sector applicants, members of organized groups, or representatives of Tribal, State, or local government agencies — can better participate in the assessment of environmental impacts conducted by Federal agencies.

    310

    2008 Coal Age buyers guide  

    Science Conference Proceedings (OSTI)

    The buyers guide lists more than 1200 companies mainly based in the USA, that provide equipment and services to US coal mines and coal preparation plants. The guide is subdivided by product categories.

    NONE

    2008-07-15T23:59:59.000Z

    311

    Condenser Application and Maintenance Guide  

    Science Conference Proceedings (OSTI)

    The Condenser Application and Maintenance Guide provides plant personnel with information on the operation, maintenance, and performance of condensers. The contents of this guide will assist plants in improving condenser performance, reducing maintenance costs, and increasing condenser reliability.

    2001-08-23T23:59:59.000Z

    312

    2009 Coal Age Buyers Guide  

    SciTech Connect

    The buyers guide lists more than 1200 companies mainly based in the USA, that provide equipment and services to US coal mines and coal preparation plants. The guide is subdivided by product categories.

    NONE

    2009-07-15T23:59:59.000Z

    313

    H2 Educate! Student Guide  

    Fuel Cell Technologies Publication and Product Library (EERE)

    H2 Educate! Teacher and Student Guides - These new guides were developed by the National Energy Education Development (NEED) Project's Teacher Advisory Board for the DOE Hydrogen Program. Sentech, Inc

    314

    H2 Educate! Teacher Guide  

    Fuel Cell Technologies Publication and Product Library (EERE)

    H2 Educate! Teacher and Student Guides - These new guides were developed by the National Energy Education Development (NEED) Project's Teacher Advisory Board for the DOE Hydrogen Program. Sentech, Inc

    315

    Ash Handling System Maintenance Guide  

    Science Conference Proceedings (OSTI)

    This Ash Handling System Maintenance Guide provides fossil plant maintenance personnel with current maintenance information on this system. This guide will assist plant maintenance personnel in improving the reliability and reducing the maintenance costs for the ash handling system.

    2005-12-23T23:59:59.000Z

    316

    Information Security Guide  

    E-Print Network (OSTI)

    Information Security Guide For Government Executives Pauline Bowen Elizabeth Chew Joan Hash #12; Table of Contents Introduction 1 Why do I need to invest in information security? 2 Where do I need to focus my attention in accomplishing critical information security goals? 4 What are the key activities

    317

    Cool Storage Technology Guide  

    Science Conference Proceedings (OSTI)

    It is a fact that avoiding load growth is cheaper than constructing new power plants. Cool storage technologies offer one method for strategically stemming the impact of future peak demand growth. This guide provides a comprehensive resource for understanding and evaluating cool storage technologies.

    2000-08-14T23:59:59.000Z

    318

    2005 buyer's guide  

    SciTech Connect

    The guide gives contact details of about 90 companies in the USA specialising in a full range of equipment for use in the coal industry. The companies are listed by category. Equipment for coal preparation, materials handling, haulage, and transport, coal mining and fire and environmental protection is included.

    NONE

    2005-11-01T23:59:59.000Z

    319

    2008 buyer's guide  

    Science Conference Proceedings (OSTI)

    This annual buyers' guide provides a resource for identifying the companies that provide the products and services required in the power generation industry. It is divided into 3 sections, namely products, services and companies. More than 1750 suppliers mostly in the USA are listed in over 400 product categories.

    NONE

    2007-12-15T23:59:59.000Z

    320

    Sensor Characteristics Reference Guide  

    Science Conference Proceedings (OSTI)

    The Buildings Technologies Office (BTO), within the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), is initiating a new program in Sensor and Controls. The vision of this program is: • Buildings operating automatically and continuously at peak energy efficiency over their lifetimes and interoperating effectively with the electric power grid. • Buildings that are self-configuring, self-commissioning, self-learning, self-diagnosing, self-healing, and self-transacting to enable continuous peak performance. • Lower overall building operating costs and higher asset valuation. The overarching goal is to capture 30% energy savings by enhanced management of energy consuming assets and systems through development of cost-effective sensors and controls. One step in achieving this vision is the publication of this Sensor Characteristics Reference Guide. The purpose of the guide is to inform building owners and operators of the current status, capabilities, and limitations of sensor technologies. It is hoped that this guide will aid in the design and procurement process and result in successful implementation of building sensor and control systems. DOE will also use this guide to identify research priorities, develop future specifications for potential market adoption, and provide market clarity through unbiased information

    Cree, Johnathan V.; Dansu, A.; Fuhr, P.; Lanzisera, Steven M.; McIntyre, T.; Muehleisen, Ralph T.; Starke, M.; Banerjee, Pranab; Kuruganti, T.; Castello, C.

    2013-04-01T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    321

    Wet Stacks Design Guide  

    Science Conference Proceedings (OSTI)

    The expense of fluegas reheat has led to increased application of less expensive wet stacks downstream of wet FGD (flue gas desulfurization) systems. Good data is necessary to properly design the wet stack system or serious problems can occur. This design guide summarizes all the latest information and provides guidance on developing detailed design specifications.

    1997-01-04T23:59:59.000Z

    322

    Constructing a Temporal Relation Tagged Corpus of Chinese based on Dependency Structure Analysis  

    E-Print Network (OSTI)

    This paper describes an annotation guideline for a temporal relation-tagged corpus of Chinese. Our goal is construction of corpora to be used for a corpus-based analysis of temporal relations among events. Since annotating all combinations of events is inefficient, we examine the use of dependency structure to efficiently recognize temporal relations. We annotate a part of Treebank based on our guidelines. Then, we survey a small tagged data set to investigate the coverage of our method. While we find that use of dependency structure drastically reduces manual effort in constructing a tagged corpus with temporal relations, the coverage of the methods achieves about 63%.

    Yuchang Cheng; Masayuki Asahara; Yuji Matsumoto

    2007-01-01T23:59:59.000Z

    323

    DOE G 413.3-12, U.S. Department of Energy Project Definition Rating Index Guide  

    Directives, Delegations, and Requirements

    This Guide assists individuals and teams involved in conducting assessments of project definition (i.e., how well front-end planning has been conducted to ...

    2010-07-22T23:59:59.000Z

    324

    Chemical Homogeneity in Collinder 261 and Implications for Chemical Tagging  

    E-Print Network (OSTI)

    This paper presents abundances for 12 red giants of the old open cluster Collinder 261 based on spectra from VLT/UVES. Abundances were derived for Na, Mg, Si, Ca, Mn, Fe, Ni, Zr and Ba. We find the cluster has a solar-level metallicity of [Fe/H] = -0.03 dex. However some alpha elements were found to be enhanced. The star-to-star scatter was consistent with the expected measurement uncertainty for all elements. The observed rms scatter is as follows: Na = 0.07, Mg = 0.05, Si = 0.06, Ca = 0.05, Mn = 0.03, Fe = 0.02, Ni = 0.04, Zr = 0.12, and Ba = 0.03 dex. The intrinsic scatter was estimated to be less than 0.05 dex. Such high levels of homogeneity indicate that chemical information remains preserved in this old open cluster. We use the chemical homogeneity we have now established in Cr 261, Hyades and the HR1614 moving group to examine the uniqueness of the individual cluster abundance patterns, ie. chemical signatures. We demonstrate that the three studied clusters have unique chemical signatures, and discuss how other such signatures may be searched for in the future. Our findings support the prospect of chemically tagging disk stars to common formation sites in order to unravel the dissipative history of the Galactic disk.

    G. M. De Silva; K. C. Freeman; M. Asplund; J. Bland-Hawthorn; M. S. Bessell; R. Collet

    2006-11-28T23:59:59.000Z

    325

    On the Feasibility and Utility of ISR Tagging  

    E-Print Network (OSTI)

    The production of new particles at a hadron collider like the LHC is always accompanied by QCD radiation attributable to the initial state (i.e. ISR). This tends to complicate analyses, so ISR is normally regarded as a nuisance. Nevertheless, we show that ISR can also be valuable, yielding information that can help in the discovery and interpretation of physics beyond the Standard Model. To access this information we will introduce new techniques designed to identify ISR jets on an event-by-event basis, a process we term ISR tagging. As a demonstration of their utility, we will apply these techniques to SUSY di-squark (di-gluino) production to show that they can be used to identify ISR jets in roughly 40% (15%) of the events, with a mistag rate of around 10% (15%). We then show that, through the application of a new method which we will introduce, knowledge of an ISR jet allows us to infer the squark (gluino) mass to within roughly 20% of its true value.

    David Krohn; Lisa Randall; Lian-Tao Wang

    2011-01-04T23:59:59.000Z

    326

    Waste Pickup Form User's Guide  

    E-Print Network (OSTI)

    Waste Pickup Form User's Guide Updated: 3/13/12 #12;Introduction: Welcome to the Cal State University Fullerton Online Waste Pickup Form User's Guide. In this guide you will learn what you can use phosphorus-32) 3. To request a pickup of universal waste including light bulbs, aerosol cans, batteries

    de Lijser, Peter

    327

    RCRA Assessment Plan for Single-Shell Tank Waste Management Area T  

    Science Conference Proceedings (OSTI)

    This plan describes the data quality objectives process used to guide information gathering to further the assessment at WMA T.

    Horton, Duane G.

    2006-01-15T23:59:59.000Z

    328

    Statistical Survival Analysis of Fish and Wildlife Tagging Studies; SURPH.1 Manual - Analysis of Release-Recapture Data for Survival Studies, 1994 Technical Manual.  

    DOE Green Energy (OSTI)

    Program SURPH is the culmination of several years of research to develop a comprehensive computer program to analyze survival studies of fish and wildlife populations. Development of this software was motivated by the advent of the PIT-tag (Passive Integrated Transponder) technology that permits the detection of salmonid smolt as they pass through hydroelectric facilities on the Snake and Columbia Rivers in the Pacific Northwest. Repeated detections of individually tagged smolt and analysis of their capture-histories permits estimates of downriver survival probabilities. Eventual installation of detection facilities at adult fish ladders will also permit estimation of ocean survival and upstream survival of returning salmon using the statistical methods incorporated in SURPH.1. However, the utility of SURPH.1 far exceeds solely the analysis of salmonid tagging studies. Release-recapture and radiotelemetry studies from a wide range of terrestrial and aquatic species have been analyzed using SURPH.1 to estimate discrete time survival probabilities and investigate survival relationships. The interactive computing environment of SURPH.1 was specifically developed to allow researchers to investigate the relationship between survival and capture processes and environmental, experimental and individual-based covariates. Program SURPH.1 represents a significant advancement in the ability of ecologists to investigate the interplay between morphologic, genetic, environmental and anthropogenic factors on the survival of wild species. It is hoped that this better understanding of risk factors affecting survival will lead to greater appreciation of the intricacies of nature and to improvements in the management of wild resources. This technical report is an introduction to SURPH.1 and provides a user guide for both the UNIX and MS-Windows{reg_sign} applications of the SURPH software.

    Smith, Steven G.; Skalski, John R.; Schelechte, J. Warren [Univ. of Washington, Seattle, WA (United States). Center for Quantitative Science

    1994-12-01T23:59:59.000Z

    329

    Format and Content Guide for DOE Low-Level Waste Disposal Facility  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    2 2 G Approved: XX-XX-XX IMPLEMENTATION GUIDE for use with DOE M 435.1-1 Format and Content Guide for U.S. Department of Energy Low-Level Waste Disposal Facility Performance Assessments and Composite Analyses U.S. DEPARTMENT OF ENERGY DOE G 435.1-2 i DRAFT XX-XX-XX LLW PA and CA Format and Content Guide Revision 0, XX-XX-XX Format and Content Guide for U.S. Department of Energy Low-Level Waste Disposal Facility Performance Assessments and Composite Analyses CONTENTS List of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v List of Acronyms and Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v PART A: INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    330

    A Study to Determine the Biological Feasability of a New Fish Tagging System : Annual Report, 1986-1987.  

    DOE Green Energy (OSTI)

    In 1983, a multi-year project to evaluate the technical and biological feasibility of adapting a new identification system to salmonids was established. The system is based upon a miniaturized passive integrated transponder (PIT) tag. This report discusses the work completed and is divided into laboratory studies, field studies, and systems development. All studies were conducted using a glass-encapsulated tag implanted into the body cavity of test fish via a 12-gauge hypodermic needle. Laboratory studies with juvenile chinook salmon, Oncorhynchus tshawytscha, showed that retention of glass-encapsulated PIT tags was 99-100% in fish weighing 3 g (mean weight) or larger. No adverse tissue response to the tag was noted. The survival of fish 5 g (mean weight) or larger was usually greater than 99%. However, fish ranging in weight from 2 to 4 g, or fish undergoing a physiological change such as smoltification may have a low mortality (usually less than 5.0%) after tagging. The mortality rate in the smaller fish was dependent upon tagging skill whereas mortality in smolting fish seemed dependent upon the level of stress. Growth comparisons between tagged and control fish indicated PIT-tagged fish had a slightly depressed growth rate at some measurement periods. The operational life of glass-encapsulated PIT tags implanted in fish was good, with 100% of the tags operating after 401 days. No tags were rejected from the fish during the observation period.

    Prentice, Earl F.; Flagg, T.A.

    1987-12-01T23:59:59.000Z

    331

    A Low-Power, Battery-Free Tag for Body Sensor Networks  

    E-Print Network (OSTI)

    A new tag for pervasive sensing applications consists of a custom integrated circuit, an antenna for radio frequency energy harvesting, and sensors for monitoring physiological parameters. This paper presents a wearable ...

    Mandal, Soumyajit

    332

    Multi-dimensional ultra-high frequency passive radio frequency identification tag antenna designs  

    E-Print Network (OSTI)

    In this thesis, we present the design, simulation, and empirical evaluation of two novel multi-dimensional ultra-high frequency (UHF) passive radio frequency identification (RFID) tag antennas, the Albano-Dipole antenna ...

    Delichatsios, Stefanie Alkistis

    2006-01-01T23:59:59.000Z

    333

    CargoNet : micropower sensate tags for supply-chain management and security  

    E-Print Network (OSTI)

    This thesis describes the development of a system of sensate active RFID tags for supply-chain management and security applications, necessitated by the current lack of commercial platforms capable of monitoring the state ...

    Malinowski, Mateusz Ksawery

    2007-01-01T23:59:59.000Z

    334

    Supplementary Material for Satellite Tagging and Cardiac Physiology Reveal Niche Expansion in Salmon Sharks  

    E-Print Network (OSTI)

    geopositions and PAT tags recorded pressure, ambient temperature and light. Several hardware versions into a hoist and lifted out of the water on a stretcher deployed from the ship's crane. A soft moist cloth

    Luther, Douglas S.

    335

    Temporal diffeomorphic free form deformation (TDFFD) applied to motion and deformation quantification of tagged MRI sequences  

    Science Conference Proceedings (OSTI)

    This paper presents strain quantification results obtained from the Tagged Magnetic Resonance Imaging (TMRI) sequences acquired for the 1st cardiac Motion Analysis Challenge (cMAC). We applied the Temporal Diffeomorphic Free Form Deformation ...

    Mathieu De Craene; Catalina Tobon-Gomez; Constantine Butakoff; Nicolas Duchateau; Gemma Piella; Kawal S. Rhode; Alejandro F. Frangi

    2011-09-01T23:59:59.000Z

    336

    CP violation in flavor-tagged Bs? --> J/[psi][phi] decays  

    E-Print Network (OSTI)

    In this dissertation, we present the results of a time-dependent angular analysis of Bs -+ J/,0 decays performed with the use of initial-state flavor tagging. CP violation is observed in this mode through the interference ...

    Makhoul, Khaldoun

    2009-01-01T23:59:59.000Z

    337

    Forward physics with tagged protons at the LHC: QCD and anomalous couplings  

    E-Print Network (OSTI)

    We present some physics topics that can be studied at the LHC using proton tagging. We distinguish the QCD (Pomeron structure, BFKL analysis...) from the exploratory physics topics (HIggs boson, anomalous couplings between photons and $W/Z$ bosons

    Royon, C

    2013-01-01T23:59:59.000Z

    338

    Physics with tagged protons at the LHC: understanding the Pomeron structure and anomalous coupling studies  

    E-Print Network (OSTI)

    We describe different physics topics which can be performed at the LHC using tagged intact protons, namely a better understanding of the Pomeron structure in terms of quarks and gluons, and the serach for quartic anomalous couplings.

    Royon, C

    2013-01-01T23:59:59.000Z

    339

    Method of remote powering and detecting multiple UWB passive tags in an RFID system  

    DOE Patents (OSTI)

    A new Radio Frequency Identification (RFID), tracking, powering apparatus/system and method using coded Ultra-wideband (UWB) signaling is introduced. The proposed hardware and techniques disclosed herein utilize a plurality of passive UWB transponders in a field of an RFID-radar system. The radar system itself enables multiple passive tags to be remotely powered (activated) at about the same time frame via predetermined frequency UWB pulsed formats. Once such tags are in an activated state, an UWB radar transmits specific "interrogating codes" to put predetermined tags in an awakened status. Such predetermined tags can then communicate by a unique "response code" so as to be detected by an UWB system using radar methods.

    Dowla, Farid U. (Castro Valley, CA); Nekoogar, Faranak (San Ramon, CA); Benzel, David M. (Livermore, CA); Dallum, Gregory E. (Livermore, CA); Spiridon, Alex (Palo Alto, CA)

    2012-05-29T23:59:59.000Z

    340

    Voice-to-phoneme conversion algorithms for voice-tag applications in embedded platforms  

    Science Conference Proceedings (OSTI)

    We describe two voice-to-phoneme conversion algorithms for speaker-independent voice-tag creation specifically targeted at applications on embedded platforms. These algorithms (batch mode and sequential) are compared in speech recognition experiments ...

    Yan Ming Cheng; Changxue Ma; Lynette Melnar

    2008-01-01T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    341

    Vulnerability Assessment Team (VAT) - Nuclear Engineering Division  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Vulnerability Assessment Team Vulnerability Assessment Team VAT Projects Introducing the VAT Adversarial Vulnerability Assessments Safety Tags & Product Counterfeiting Election Security Spoofing GPS Defeating Existing Tamper-Indicating Seals Specialty Field Tools & Sampling Tools Insider Threat Mitigation Drug Testing Security Microprocessor Prototypes The Journal of Physical Security Vulnerability Assessments Vulnerability Assessments Insanely Fast ”Processor Shop Insanely Fast ”Processor Shop Seals About Seals Applications of Seals Common Myths about Tamper Indicating Seals Definitions Findings and Lessons Learned New Seals Types of Seals Seals References Selected VAT Papers Selected VAT Papers Selected Invited Talks Self-Assessment Survey Security Maxims Devil's Dictionary of Security Terms

    342

    Nuclear Maintenance Applications Center: Clearance and Tagging Guideline for Nuclear Electric Generating Stations, Revision 1  

    Science Conference Proceedings (OSTI)

    Clearance and tagging programs at nuclear electric generating facilities serve to protect personnel from injury and to protect equipment from damage. These programs are thus of vital importance from both a worker safety standpoint and an operations and maintenance cost standpoint. This guideline presents a clearance and tagging approach, developed with broad industry input, that nuclear electric generating companies can use as a basis for comparison with their own programs.

    2010-02-01T23:59:59.000Z

    343

    Disabling equational theories in unification for cryptographic protocol analysis through tagging  

    E-Print Network (OSTI)

    In this paper, we show a new tagging scheme for cryptographic protocol messages. Under this tagging, equational theories of operators such as exclusive-or, binary addition etc. are effectively disabled, when terms are unified. We believe that this result has a significant impact on protocol analysis and security, since unification is at the heart of symbolic protocol analysis. Hence, disabling equational theories in unification implies disabling them altogether in protocol analysis for most operators and theories.

    Malladi, Sreekanth

    2010-01-01T23:59:59.000Z

    344

    Adult Salmonid PIT-TAG Returns to Columbia River`s Lower Granite Dam.  

    DOE Green Energy (OSTI)

    The results of an analysis of the returns of PIT-tagged Snake River spring chinook and steelhead detected at Lower Granite Dam are summarized. Included is theoretical work on statistical power calculations for tests of return rates. The phrase return rate will be taken to mean return and detection rate. Knowledge that a fish has returned depends upon it being detected at Lower Granite Dam. Some returns are unaccounted for because they go through the navigation lock or manage to go through the adult bypass undetected. (1) Adult PIT tag recoveries to date are informative at least from a qualitative perspective. (2) The tagging levels by geographic region, rearing type, and, for chinook, life history stage have varied considerably since PIT tagging began on the Columbia River system. Early tagging studies were directed at Juvenile problems rather than adult return rates. As a result, comparisons in adult return rates between years, regions, etc., are more difficult. Global conclusions about the effect of potential treatments and/or natural factors, such as region of origin, on adult return rates are difficult to make until a more balanced. more consistent tagging study is implemented. (3) Along the same lines, tagging levels will need to be increased considerably if experiments are to be conducted to determine factors that affect return rates. E.g., approximately 46,000 fish in both the control and the treatment groups need to be PIT-tagged to detect a statistically significant difference with 80% probability. (4) Analysis of the available data suggests that life stage (parr or smolt), rearing type (hatchery or wild), and geographic location all affect the return rates for spring chinook. The data are limited, however. (5) Return rates for Snake River steelhead are roughly an order of magnitude greater than Snake River spring chinook return rates.

    Newman, Ken

    1995-04-01T23:59:59.000Z

    345

    Guide to Chemistry Dept  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Guide to the Chemistry Building Guide to the Chemistry Building The main Chemistry building (Building 555) has been designed to make adequate facilities available for research and to provide an informal atmosphere for free exchange among Department members. There are public areas, shared laboratories, shared office space, and privately assigned places. A newcomer to the building should become familiar with locations of the key areas. Stairs and Elevators - Building 555 The central main staircase and a passenger elevator are for personnel traffic only. Each wing has a staircase. There is a rear staircase for traffic directly to service areas. The building has a freight elevator at the rear core. Flammable material, chemicals, solvents, gas cylinders, etc. can be transported in the freight elevator but not in the passenger elevator. Do not ride with gas cylinders or dewars charged with cryogens as the presence of these in a confined space introduces a suffocation hazard.

    346

    Guide to research facilities  

    SciTech Connect

    This Guide provides information on facilities at US Department of Energy (DOE) and other government laboratories that focus on research and development of energy efficiency and renewable energy technologies. These laboratories have opened these facilities to outside users within the scientific community to encourage cooperation between the laboratories and the private sector. The Guide features two types of facilities: designated user facilities and other research facilities. Designated user facilities are one-of-a-kind DOE facilities that are staffed by personnel with unparalleled expertise and that contain sophisticated equipment. Other research facilities are facilities at DOE and other government laboratories that provide sophisticated equipment, testing areas, or processes that may not be available at private facilities. Each facility listing includes the name and phone number of someone you can call for more information.

    Not Available

    1993-06-01T23:59:59.000Z

    347

    System and method for simultaneously collecting serial number information from numerous identity tags  

    DOE Patents (OSTI)

    A system and method are disclosed for simultaneously collecting serial number information reports from numerous colliding coded-radio-frequency identity tags. Each tag has a unique multi-digit serial number that is stored in non-volatile RAM. A reader transmits an ASCII coded ``D`` character on a carrier of about 900 MHz and a power illumination field having a frequency of about 1.6 Ghz. A one MHz tone is modulated on the 1.6 Ghz carrier as a timing clock for a microprocessor in each of the identity tags. Over a thousand such tags may be in the vicinity and each is powered-up and clocked by the 1.6 Ghz power illumination field. Each identity tag looks for the ``D`` interrogator modulated on the 900 MHz carrier, and each uses a digit of its serial number to time a response. Clear responses received by the reader are repeated for verification. If no verification or a wrong number is received by any identity tag, it uses a second digital together with the first to time out a more extended period for response. Ultimately, the entire serial number will be used in the worst case collision environments; and since the serial numbers are defined as being unique, the final possibility will be successful because a clear time-slot channel will be available. 5 figs.

    Doty, M.A.

    1997-01-07T23:59:59.000Z

    348

    Residential Duct Design Guide  

    Science Conference Proceedings (OSTI)

    To provide comfortable levels of heating or cooling, a space-conditioning system must be properly sized and carefully installed. Movement of air and passages through which air is moved are vitally important for comfort. An inadequate system can cause uncomfortable drafts, may fail to move sufficient air to meet space heating and cooling loads, or may result in excessive energy costs. The best way to avoid problems is to prevent them in the design stage. This guide gives HVAC specialists basic information...

    2000-11-02T23:59:59.000Z

    349

    Building Energy Code Resource Guide: Air Leakage Guide | Building Energy  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Air Leakage Guide Air Leakage Guide The U.S. Department of Energy (DOE) recognizes the enormous potential that exists for improving the energy efficiency, safety and comfort of homes. The 2012 International Energy Conservation Code (IECC) sets the bar for energy efficiency, and air sealing requirements are one of the key provisions. This guide is a resource for understanding the air leakage requirements in the 2012 IECC and suggestions on how these measures can be met. It also provides information from Building America's Air Sealing Guide, best Practices and case studies on homes that are currently meeting the provisions. The 2012 IECC and a few International Residential Code requirements are referenced throughout the guide. Publication Date: Friday, September 30, 2011 BECP_Buidling Energy Code Resource Guide Air Leakage

    350

    Passive micromechanical tags. An investigation into writing information at nanometer resolution on micrometer size objects  

    SciTech Connect

    The authors have completed a 3-year study of the technology related to the development of micron-sized passive micromechanical tags. The project was motivated by the discovery in 1990 by the present authors that low energy, high charge state ions (e.g., Xe{sup +44}) can produce nanometer-size damage sites on solid surfaces, and the realization that a pattern of these sites represents information. It was envisioned that extremely small, chemically inert, mechanical tags carrying a large label could be fabricated for a variety of applications, including tracking of controlled substances, document verification, process control, research, and engineering. Potential applications exist in the data storage, chemical, food, security, and other industries. The goals of this project were fully accomplished, and they are fully documented here. The work was both experimental and developmental. Most of the experimental effort was a search for appropriate tag materials. Several good materials were found, and the upper limits of information density were determined (ca. 10{sup 12} bit/cm{sup 2}). Most of the developmental work involved inventing systems and strategies for using these tags, and compiling available technologies for implementing them. The technology provided herein is application-specific: first, the application must be specified, then the tag can be developed for it. The project was not intended to develop a single tag for a single application or for all possible applications. Rather, it was meant to provide the enabling technology for fabricating tags for a range of applications. The results of this project provide sufficient information to proceed directly with such development.

    Schmieder, R.W.; Bastasz, R.J.

    1995-01-01T23:59:59.000Z

    351

    LUser_CompetencyAssessment  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Competency Assessments (Employee) Competency Assessments (Employee) © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Participating in Competency Assessments (Employee) Purpose The purpose of this job aid is to guide users and supervisors through the step-by-step process of participating in a competency assessment by viewing gaps, assigning items, conducting a self- assessment, reviewing completed assessments, and viewing the competency history. View Gaps and Assign Items 6 Steps Task A Employee: Conduct Self Assessment 8 Steps Task B Employee: Review Completed Assessment - 6 Steps Task C Employee: View Competency History 11 Steps Task D SuccessFactors Learning v 6.4 User Job Aid Participating in Competency Assessments (Employee)

    352

    GUIDE FOR POLARIZED NEUTRONS  

    DOE Patents (OSTI)

    The plane of polarization of a beam of polarized neutrons is changed by this invention, and the plane can be flipped back and forth quicitly in two directions in a trouble-free manner. The invention comprises a guide having a plurality of oppositely directed magnets forming a gap for the neutron beam and the gaps are spaced longitudinally in a spiral along the beam at small stepped angles. When it is desired to flip the plane of polarization the magnets are suitably rotated to change the direction of the spiral of the gaps. (AEC)

    Sailor, V.L.; Aichroth, R.W.

    1962-12-01T23:59:59.000Z

    353

    STMVOC User's Guide  

    Science Conference Proceedings (OSTI)

    This report contains instructions for using the STMVOC numerical simulator. This code, which was developed at Lawrence Berkeley Laboratory, is an extension of the TOUGH geothermal code for use in problems involving subsurface contamination by nonaqueous phase liquids (NAPLs). The code is used for modeling the nonisothermal transport of air, water, and an organic chemical in three fluid phases. A discussion of the physical processes included in the simulator is given along with a brief outline of the mathematical formulation. A detailed guide to preparing the STMVOC input file with several illustrative examples is provided. 22 refs., 27 figs., 3 tabs.

    Falta, R.W.; Pruess, K.

    1991-06-01T23:59:59.000Z

    354

    RADTRAN 5 user guide.  

    SciTech Connect

    This User Guide for the RADTRAN 5 computer code for transportation risk analysis describes basic risk concepts and provides the user with step-by-step directions for creating input files by means of either the RADDOG input file generator software or a text editor. It also contains information on how to interpret RADTRAN 5 output, how to obtain and use several types of important input data, and how to select appropriate analysis methods. Appendices include a glossary of terms, a listing of error messages, data-plotting information, images of RADDOG screens, and a table of all data in the internal radionuclide library.

    Kanipe, Frances L.; Neuhauser, Karen Sieglinde

    2003-07-01T23:59:59.000Z

    355

    Solar Ready Buildings Planning Guide  

    SciTech Connect

    This guide offers a checklist for building design and construction to enable installation of solar photovoltaic and heating systems at some time after the building is constructed.

    Lisell, L.; Tetreault, T.; Watson, A.

    2009-12-01T23:59:59.000Z

    356

    FAQS Reference Guide – Facility Representative  

    Energy.gov (U.S. Department of Energy (DOE))

    This reference guide addresses the competency statements in the October 2010 edition of DOE-STD-1151-2010, Facility Representative Functional Area Qualification Standard.

    357

    FAQS Reference Guide – Criticality Safety  

    Energy.gov (U.S. Department of Energy (DOE))

    This reference guide addresses the competency statements in the April 2009 edition of DOE-STD-1173-2009, Criticality Safety Functional Area Qualification Standard.

    358

    FAQS Reference Guide- Chemical Processing  

    Energy.gov (U.S. Department of Energy (DOE))

    This reference guide addresses the competency statements in the February 2010 edition of DOE-STD-1176-2010, Chemical Processing Functional Area Qualification Standard.

    359

    FAQS Reference Guide – Waste Management  

    Energy.gov (U.S. Department of Energy (DOE))

    This reference guide addresses the competency statements in the January 2003 edition of DOE-STD-1159-2003, Waste Management Functional Area Qualification Standard.

    360

    FAQS Reference Guide – Environmental Restoration  

    Energy.gov (U.S. Department of Energy (DOE))

    This reference guide addresses the competency statements in the November 2002 edition of DOE-STD-1157-2002, Environmental Restoration Functional Area Qualification Standard.

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    361

    FAQS Reference Guide – Environmental Compliance  

    Energy.gov (U.S. Department of Energy (DOE))

    This reference guide addresses the competency statements in the June 2011 edition of DOE-STD-1156-2011, Environmental Compliance Functional Area Qualification Standard.

    362

    ENERGY STAR Petroleum Energy Guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    183 ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY Energy Efficiency Improvement and Cost Saving Opportunities For Petroleum Refineries An ENERGY STAR Guide for Energy and...

    363

    ENERGY STAR Student Activity Guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    program helping businesses and individuals fight global warming through superior energy efficiency. 1 STUDENT ACTIVITY GUIDE Introduction Colleges and Universities-Energy Use and...

    364

    A Guide to Educational Activities  

    Science Conference Proceedings (OSTI)

    A Guide to Educational Activities. ... Science: Get Psyched! NIST hosts this event once a year for 300 Girl Scouts from the local area. ...

    2013-07-12T23:59:59.000Z

    365

    TurbSim User's Guide  

    DOE Green Energy (OSTI)

    Guide to using TurbSim (Turbulence Simulator), which was developed to provide a numerical simulation of a full-field flow that contains bursts of coherent turbulence.

    Jonkman, B. J.; Buhl, M. L., Jr.

    2006-09-01T23:59:59.000Z

    366

    Building Technologies Office: Advanced Energy Retrofit Guides  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Energy Energy Retrofit Guides to someone by E-mail Share Building Technologies Office: Advanced Energy Retrofit Guides on Facebook Tweet about Building Technologies Office: Advanced Energy Retrofit Guides on Twitter Bookmark Building Technologies Office: Advanced Energy Retrofit Guides on Google Bookmark Building Technologies Office: Advanced Energy Retrofit Guides on Delicious Rank Building Technologies Office: Advanced Energy Retrofit Guides on Digg Find More places to share Building Technologies Office: Advanced Energy Retrofit Guides on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score

    367

    PINS Spectrum Identification Guide  

    SciTech Connect

    The Portable Isotopic Neutron Spectroscopy—PINS, for short—system identifies the chemicals inside munitions and containers without opening them, a decided safety advantage if the fill chemical is a hazardous substance like a chemical warfare agent or an explosive. The PINS Spectrum Identification Guide is intended as a reference for technical professionals responsible for the interpretation of PINS gamma-ray spectra. The guide is divided into two parts. The three chapters that constitute Part I cover the science and technology of PINS. Neutron activation analysis is the focus of Chapter 1. Chapter 2 explores PINS hardware, software, and related operational issues. Gamma-ray spectral analysis basics are introduced in Chapter 3. The six chapters of Part II cover the identification of PINS spectra in detail. Like the PINS decision tree logic, these chapters are organized by chemical element: phosphorus-based chemicals, chlorine-based chemicals, etc. These descriptions of hazardous, toxic, and/or explosive chemicals conclude with a chapter on the identification of the inert chemicals, e.g. sand, used to fill practice munitions.

    A.J. Caffrey

    2012-03-01T23:59:59.000Z

    368

    Oil Study Guide - Middle School | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Study Guide - Middle School Oil Study Guide - Middle School More Documents & Publications Oil Study Guide - High School How is shale gas produced? Coal Study Guide - Middle School...

    369

    Coal Study Guide - Middle School | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    - Middle School Coal Study Guide - Middle School Coal Study Guide - Middle School More Documents & Publications Coal Study Guide for Elementary School Coal Study Guide - High...

    370

    Natural Gas Study Guide - Middle School | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    - Middle School Natural Gas Study Guide - Middle School More Documents & Publications Oil Study Guide - Middle School Fossil Fuels Study Guide - High School Oil Study Guide - High...

    371

    Fossil Fuels Study Guide - High School | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Fuels Study Guide - High School Fossil Fuels Study Guide - High School Fossil Fuels Study Guide - High School More Documents & Publications Coal Study Guide for Elementary School...

    372

    Coal Study Guide for Elementary School | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Study Guide: Coal (for Elementary School) More Documents & Publications Coal Study Guide - Middle School Coal Study Guide - High School Fossil Fuels Study Guide - High School...

    373

    2013 Real Property Desk Guide | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    2013 Real Property Desk Guide 2013 Real Property Desk Guide Real Estate Desk Guide - 2013 update.pdf More Documents & Publications REAL ESTATE PROPERTY GUIDE 2013 REAL ESTATE...

    374

    Using HB Family of Protocols for Privacy-Preserving Authentication of RFID Tags in a Population  

    E-Print Network (OSTI)

    In this paper, we propose an HB-like protocol for privacy-preserving authentication of RFID tags, whereby a tag can remain anonymous and untraceable to an adversary during the authentication process. Previous proposals of such protocols were based on PRF computations. Our protocol can instead be used on low-cost tags that may be incapable of computing standard PRFs. Moreover, since the underlying computations in HB protocols are very efficient, our protocol also reduces reader load compared to PRF-based protocols. We suggest a tree-based approach that replaces the PRF-based authentication from prior work with a procedure such as HB+ or HB#. We optimize the tree- traversal stage through usage of a "light version" of the underlying protocol and shared random challenges across all levels of the tree. This provides significant reduction of the communication resources, resulting in a privacy-preserving protocol almost as efficient as the underlying HB+ or HB#

    Halevi, Tzipora; Halevi, Shai

    2009-01-01T23:59:59.000Z

    375

    Electroweak boson-tagged jet event asymmetries at the Large Hadron Collider  

    E-Print Network (OSTI)

    Tagged jet measurements provide a promising experimental channel to quantify the similarities and differences in the mechanisms of jet production in proton-proton and nucleus-nucleus collisions. We present the first calculation of the transverse momentum asymmetry of $Z^0/\\gamma^*$-tagged jet events and the momentum imbalance of $\\gamma$-tagged jet events in $\\sqrt{s}=2.76$ TeV reactions at the LHC. Our results combine the ${\\cal O}(G_F\\alpha_s^2)$, ${\\cal O}(G_F\\alpha_s^2)$ perturbative cross sections with the radiative and collisional processes that modify parton showers in the presence of dense QCD matter. We find that strong asymmetry momentum and imbalance, respectively, are generated in central Pb+Pb reactions that have little sensitivity to the fluctuations of the underlying soft hadronic background. We present theoretical model predictions for their shape and magnitude.

    Ivan Vitev

    2012-10-03T23:59:59.000Z

    376

    Cyanine-based probe\\tag-peptide pair fluorescence protein imaging and fluorescence protein imaging methods  

    DOE Patents (OSTI)

    A molecular probe comprises two arsenic atoms and at least one cyanine based moiety. A method of producing a molecular probe includes providing a molecule having a first formula, treating the molecule with HgOAc, and subsequently transmetallizing with AsCl.sub.3. The As is liganded to ethanedithiol to produce a probe having a second formula. A method of labeling a peptide includes providing a peptide comprising a tag sequence and contacting the peptide with a biarsenical molecular probe. A complex is formed comprising the tag sequence and the molecular probe. A method of studying a peptide includes providing a mixture containing a peptide comprising a peptide tag sequence, adding a biarsenical probe to the mixture, and monitoring the fluorescence of the mixture.

    Mayer-Cumblidge, M. Uljana; Cao, Haishi

    2013-01-15T23:59:59.000Z

    377

    Expert system for identification of simultaneous and sequential reactor fuel failures with gas tagging  

    DOE Patents (OSTI)

    Failure of a fuel element in a nuclear reactor core is determined by a gas tagging failure detection system and method. Failures are catalogued and characterized after the event so that samples of the reactor's cover gas are taken at regular intervals and analyzed by mass spectroscopy. Employing a first set of systematic heuristic rules which are applied in a transformed node space allows the number of node combinations which must be processed within a barycentric algorithm to be substantially reduced. A second set of heuristic rules treats the tag nodes of the most recent one or two leakers as "background" gases, further reducing the number of trial node combinations. Lastly, a "fuzzy" set theory formalism minimizes experimental uncertainties in the identification of the most likely volumes of tag gases. This approach allows for the identification of virtually any number of sequential leaks and up to five simultaneous gas leaks from fuel elements.

    Gross, Kenny C. (Bolingbrook, IL)

    1994-01-01T23:59:59.000Z

    378

    Bottom Ash System Maintenance Guide  

    Science Conference Proceedings (OSTI)

    This guide provides information to personnel involved in the bottom ash system and its components, including good maintenance practices, condition monitoring, predictive and preventive maintenance techniques, probable failure modes, and troubleshooting guidance. The guide was developed primarily to provide detailed maintenance and troubleshooting information but also includes basic system information.

    2000-10-31T23:59:59.000Z

    379

    Guide to the Texas Ports  

    E-Print Network (OSTI)

    . . . . . . . . ! . 0-5538-P1 Guide to the Economic Value of Texas Ports CTRCENTER FOR TRANSPORTATION RESEARCH THE UNIVERSITY OF TEXAS AT AUSTIN www.utexas.edu/research/ctr/pdf_reports/0_5538_P1.pdf #12;#12;0-5538-P1 Guide to the Economic Value of Texas Ports Peter Siegesmund, CTR Jim Kruse, TTI

    Texas at Austin, University of

    380

    Compressed Air System Maintenance Guide  

    Science Conference Proceedings (OSTI)

    The "Compressed Air System Maintenance Guide" provides fossil plant personnel with information on the operation and maintenance of the compressed air system. The contents of this guide will assist personnel in improving performance of the compressed air system, reducing maintenance costs, and increasing air system reliability.

    2002-11-27T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    381

    Energy Savers Guide | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Guide Energy Savers Guide This guide shows you how easy it is to cut your energy use at home and also on the road. EnergySavers: Tips on Saving Money and Energy at Home More...

    382

    users-guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Contents Contents Contents Contents ARGONNE NATIONAL LABORATORY 9700 South Cass Avenue Argonne, IL 60439 in ANL/MCS-TM-234 Users Guide for ROMIO: A High-Performance, Portable MPI-IO Implementation by Rajeev Thakur, Robert Ross, Ewing Lusk, William Gropp, Robert Latham Mathematics and Computer Science Division Technical Memorandum No. 234 Revised May 2004, November 2007, April 2010 This work was supported by the Mathematical, Information, and Computational Sciences Division subprogram of the Office of Advanced Scientific Computing Research, U.S. Department of Energy, under Contract W-31-109-Eng-38; and by the Scalable I/O Initiative, a multiagency project funded by the Defense Advanced Research Projects Agency (Contract DABT63-94-C-0049), the Department of Energy, the National Aeronautics and Space Administration,

    383

    Source Selection Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    ------------------ Chapter 31.4 (April 2013) ------------------ Chapter 31.4 (April 2013) Allowability of Incurred Costs References FAR Part 31 Contract Cost Principles and Procedures DEAR Subpart 970.31 Contract Cost Principles and Procedures DEAR Part 931 Contract Cost Principles and Procedures I. Overview This guide chapter discusses determining the allowability of incurred costs, emphasizing the five FAR requirements, especially the reasonableness requirement. The chapter requires Contracting Officers, when reviewing current advance agreements or establishing new advance agreements, to ensure they: (1) neither provide that a cost unallowable per FAR Part 31 or applicable DOE cost principles is allowable nor agree to any other treatment of costs inconsistent with FAR Part 31 or applicable DOE cost principles; and (2) emphasize that

    384

    Tank characterization reference guide  

    Science Conference Proceedings (OSTI)

    Characterization of the Hanford Site high-level waste storage tanks supports safety issue resolution; operations and maintenance requirements; and retrieval, pretreatment, vitrification, and disposal technology development. Technical, historical, and programmatic information about the waste tanks is often scattered among many sources, if it is documented at all. This Tank Characterization Reference Guide, therefore, serves as a common location for much of the generic tank information that is otherwise contained in many documents. The report is intended to be an introduction to the issues and history surrounding the generation, storage, and management of the liquid process wastes, and a presentation of the sampling, analysis, and modeling activities that support the current waste characterization. This report should provide a basis upon which those unfamiliar with the Hanford Site tank farms can start their research.

    De Lorenzo, D.S.; DiCenso, A.T.; Hiller, D.B.; Johnson, K.W.; Rutherford, J.H.; Smith, D.J. [Los Alamos Technical Associates, Kennewick, WA (United States); Simpson, B.C. [Westinghouse Hanford Co., Richland, WA (United States)

    1994-09-01T23:59:59.000Z

    385

    Small caliber guided projectile  

    DOE Patents (OSTI)

    A non-spinning projectile that is self-guided to a laser designated target and is configured to be fired from a small caliber smooth bore gun barrel has an optical sensor mounted in the nose of the projectile, a counterbalancing mass portion near the fore end of the projectile and a hollow tapered body mounted aft of the counterbalancing mass. Stabilizing strakes are mounted to and extend outward from the tapered body with control fins located at the aft end of the strakes. Guidance and control electronics and electromagnetic actuators for operating the control fins are located within the tapered body section. Output from the optical sensor is processed by the guidance and control electronics to produce command signals for the electromagnetic actuators. A guidance control algorithm incorporating non-proportional, "bang-bang" control is used to steer the projectile to the target.

    Jones, James F. (Albuquerque, NM); Kast, Brian A. (Albuquerque, NM); Kniskern, Marc W. (Albuquerque, NM); Rose, Scott E. (Albuquerque, NM); Rohrer, Brandon R. (Albuquerque, NM); Woods, James W. (Albuquerque, NM); Greene, Ronald W. (Albuquerque, NM)

    2010-08-24T23:59:59.000Z

    386

    Surveillance Guides - Continous Improvement  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    CONTINUOUS IMPROVEMENT CONTINUOUS IMPROVEMENT 1.0 Objective The objective of this surveillance is to verify that contractor personnel are effectively managing environment, safety, and health issues in a manner that fosters continuous improvement. The activities included in this surveillance help the Facility Representative determine whether safety issues identified through internal contractor, and external DOE or Defense Nuclear Facilities Safety Board evaluation programs are resolved consistent with the level of safety importance. 2.0 References 2.1 DOE O 414.1, Quality Assurance 2.2 DOE O 232.1, Occurrence Reporting and Processing of Operations Information 2.3 DOE-STD-1045-93, Guide to Good Practices for Notifications and Investigations of Abnormal Events 2.4 48 CFR 1970.5204, Department of Energy Acquisition

    387

    Source Selection Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    32.1 (October 2011) 32.1 (October 2011) 1 Reviewing and Approving Contract Invoices References FAR Part 31 - Contract Cost Principles and Procedures FAR Part 32 - Contract Financing FAR Part 42 - Contract Administration and Audit Services FAR Subpart 52.232 - Contract Clauses DEAR Part 931 - Contract Cost Principles and Procedures DEAR Part 932 - Contract Financing DEAR Part 942 - Contract Administration DOE O 361.1B - Acquisition Career Management Program DOE O 541.1B - Appointment of Contracting Officers and Contracting Officer Representatives Overview The purpose of this Guide Chapter is to provide guidance for ensuring that invoices/vouchers are properly reviewed and analyzed prior to making any payments to contractors (for the purposes of

    388

    CWTS: Certified Wireless Technology Specialist Official Study Guide Exam PW0-070 - CWNP Official Study Guides, 1st edition  

    Science Conference Proceedings (OSTI)

    About the Book This Official Study Guide for the CWTS exam features complete coverage of the exam objectives, as well as hands-on exercises, Real World Scenarios, chapter review questions, a detailed glossary, objective map, and a pre-assessment test. ...

    Robert J. Bartz

    2009-06-01T23:59:59.000Z

    389

    Definitions, Seals - Vulnerability Assessment Team - Nuclear Engineering  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Definitions Definitions VAT Projects Introducing the VAT Adversarial Vulnerability Assessments Safety Tags & Product Counterfeiting Election Security Spoofing GPS Defeating Existing Tamper-Indicating Seals Specialty Field Tools & Sampling Tools Insider Threat Mitigation Drug Testing Security Microprocessor Prototypes The Journal of Physical Security Vulnerability Assessments Vulnerability Assessments Insanely Fast ”Processor Shop Insanely Fast ”Processor Shop Seals About Seals Applications of Seals Common Myths about Tamper Indicating Seals Definitions Findings and Lessons Learned New Seals Types of Seals Seals References Selected VAT Papers Selected VAT Papers Selected Invited Talks Self-Assessment Survey Security Maxims Devil's Dictionary of Security Terms Argonne's VAT (brochure)

    390

    Safety - Vulnerability Assessment Team - Nuclear Engineering Division  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety Safety VAT Projects Introducing the VAT Adversarial Vulnerability Assessments Safety Tags & Product Counterfeiting Election Security Spoofing GPS Defeating Existing Tamper-Indicating Seals Specialty Field Tools & Sampling Tools Insider Threat Mitigation Drug Testing Security Microprocessor Prototypes The Journal of Physical Security Vulnerability Assessments Vulnerability Assessments Insanely Fast ”Processor Shop Insanely Fast ”Processor Shop Seals About Seals Applications of Seals Common Myths about Tamper Indicating Seals Definitions Findings and Lessons Learned New Seals Types of Seals Seals References Selected VAT Papers Selected VAT Papers Selected Invited Talks Self-Assessment Survey Security Maxims Devil's Dictionary of Security Terms Argonne's VAT (brochure)

    391

    Useful Resources- Vulnerability Assessment Team - Nuclear Engineering  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Selected Publications Selected Publications VAT Projects Introducing the VAT Adversarial Vulnerability Assessments Safety Tags & Product Counterfeiting Election Security Spoofing GPS Defeating Existing Tamper-Indicating Seals Specialty Field Tools & Sampling Tools Insider Threat Mitigation Drug Testing Security Microprocessor Prototypes The Journal of Physical Security Vulnerability Assessments Vulnerability Assessments Insanely Fast ”Processor Shop Insanely Fast ”Processor Shop Seals About Seals Applications of Seals Common Myths about Tamper Indicating Seals Definitions Findings and Lessons Learned New Seals Types of Seals Seals References Selected VAT Papers Selected VAT Papers Selected Invited Talks Self-Assessment Survey Security Maxims Devil's Dictionary of Security Terms Argonne's VAT (brochure)

    392

    New User Guide | Argonne Leadership Computing Facility  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. Feedback Form New User Guide Step 1. Request...

    393

    FAQS Reference Guide - Transportation and Traffic Management...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Transportation and Traffic Management FAQS Reference Guide - Transportation and Traffic Management This reference guide addresses the competency statements in the September 2002...

    394

    CAPITAL PROGRAMMING GUIDE | Department of Energy  

    NLE Websites -- All DOE Office Websites (Extended Search)

    and disposition of capital assets. CAPITAL PROGRAMMING GUIDE More Documents & Publications Chapter 7 - Acquisition Planning Audit Report: IG-0841 REAL ESTATE PROPERTY GUIDE 2013...

    395

    Guide for organizing ice hockey events.  

    E-Print Network (OSTI)

    ??The Purpose of making a Guide for Organizing Ice Hockey Events was to create an easy following guide for students at Vierumäki and other people… (more)

    Maclean, Ross

    2010-01-01T23:59:59.000Z

    396

    Solar Powering Your Community: A Guide for Local Governments | Open Energy  

    Open Energy Info (EERE)

    Solar Powering Your Community: A Guide for Local Governments Solar Powering Your Community: A Guide for Local Governments Jump to: navigation, search Name Solar Powering Your Community: A Guide for Local Governments Agency/Company /Organization U.S. Department of Energy Sector Energy Focus Area Buildings, Commercial, Residential, Economic Development, Grid Assessment and Integration, People and Policy, Solar - Concentrating Solar Power, Solar, - Solar Hot Water, - Solar Pv Phase Bring the Right People Together, Determine Baseline, Evaluate Options, Develop Goals, Get Feedback, Develop Finance and Implement Projects Topics Implementation, Co-benefits assessment Resource Type Guide/manual Availability Free; publicly available Publication Date 1/1/2011 Website http://solaramericacommunities References Solar Powering Your Community: A Guide for Local Governments[1]

    397

    Reading between the tags to predict real-world size-class for visually depicted objects in images  

    Science Conference Proceedings (OSTI)

    Multimedia information retrieval stands to benefit from the availability of additional information about tags and how they relate to the content visually depicted in images. We propose a generic approach that contributes to improving the informativeness ... Keywords: crowdsourcing, image annotation, lexico-syntactic patterns, real-world scale, selectional restrictions, size, user-contributed tags

    Martha Larson; Christoph Kofler; Alan Hanjalic

    2011-11-01T23:59:59.000Z

    398

    Design of a Novel, Battery-less, Solar Powered Wireless Tag for Enhanced Range Remote Tracking Applications  

    E-Print Network (OSTI)

    Design of a Novel, Battery-less, Solar Powered Wireless Tag for Enhanced Range Remote Tracking introduces a novel battery-less solar powered wireless tag for remote tracking application. A combination and Microwave/antenna design are utilized to establish an asynchronous wireless link between the solar powered

    Tentzeris, Manos

    399

    RFIG lamps: interacting with a self-describing world via photosensing wireless tags and projectors  

    Science Conference Proceedings (OSTI)

    This paper describes how to instrument the physical world so that objects become self-describing, communicating their identity, geometry, and other information such as history or user annotation. The enabling technology is a wireless tag which acts as ... Keywords: augmented reality, human-machine communication, image stabilization, projector, radio frequency identification, stucture from motion

    Ramesh Raskar; Paul Beardsley; Jeroen van Baar; Yao Wang; Paul Dietz; Johnny Lee; Darren Leigh; Thomas Willwacher

    2005-07-01T23:59:59.000Z

    400

    RFIG lamps: interacting with a self-describing world via photosensing wireless tags and projectors  

    Science Conference Proceedings (OSTI)

    This paper describes how to instrument the physical world so that objects become self-describing, communicating their identity, geometry, and other information such as history or user annotation. The enabling technology is a wireless tag which acts as ... Keywords: augmented reality, human-machine communication, image stabilization, projector, radio frequency identification, stucture from motion

    Ramesh Raskar; Paul Beardsley; Jeroen van Baar; Yao Wang; Paul Dietz; Johnny Lee; Darren Leigh; Thomas Willwacher

    2006-07-01T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    401

    Tagged Neutron Source for API Inspection Systems with Greatly Enhanced Spatial Resolution  

    Science Conference Proceedings (OSTI)

    We recently developed induced fission and transmission imaging methods with time- and directionally-tagged neutrons offer new capabilities for characterization of fissile material configurations and enhanced detection of special nuclear materials (SNM). An Advanced Associated Particle Imaging (API) generator with higher angular resolution and neutron yield than existing systems is needed to fully exploit these methods.

    None

    2012-06-04T23:59:59.000Z

    402

    One-way implodable tag capsule with hemispherical beaded end cap for LWR fuel manufacturing  

    DOE Patents (OSTI)

    A capsule is described containing a tag gas in a zircaloy body portion having a hemispherical top curved toward the bottom of the body portion. The hemispherical top has a rupturable portion upon exposure to elevated gas pressure and the capsule is positioned within a fuel element in a nuclear reactor.

    Gross, Kenny; Lambert, John

    1997-12-01T23:59:59.000Z

    403

    Schema-as-you-go: on probabilistic tagging and querying of wide tables  

    Science Conference Proceedings (OSTI)

    The emergence of Web 2.0 has resulted in a huge amount of heterogeneous data that are contributed by a large number of users, engendering new challenges for data management and query processing. Given that the data are unified from various sources and ... Keywords: dynamic instantiation, probabilistic tagging, wide table

    Meiyu Lu; Divyakant Agrawal; Bing Tian Dai; Anthony K.H. Tung

    2011-06-01T23:59:59.000Z

    404

    TVA Tracks Bulk Power Transfers with TagNet to Improve Transmission System Reliability  

    Science Conference Proceedings (OSTI)

    The bubble diagram is especially useful. In the world of real-time operations, a picture is worth a thousand words. TagNet provides TVA with The ability to identify root causes for real-time system behavior Data for future reliability models for approximation of transfer biases A mechanism to monitor system conditions using a graphical toolset. 8212Armando Rodriguez, TVA.

    2006-02-15T23:59:59.000Z

    405

    Recent News | Archives | Tags | About | Newsletter | Submit News | Links | Subscribe New Articles  

    E-Print Network (OSTI)

    this bacterial strain in a fuel cell to generate electricity would greatly increase the cell's power output Scientists Making more efficient fuel cells (9/8/2009) Tags: bacteria, fuel cells Bacteria that generate significant amounts of electricity could be used in microbial fuel cells to provide power in remote

    Lovley, Derek

    406

    Behavioral/Systems/Cognitive Tagging the Neuronal Entrainment to Beat and Meter  

    E-Print Network (OSTI)

    Behavioral/Systems/Cognitive Tagging the Neuronal Entrainment to Beat and Meter Sylvie Nozaradan,1 (BRAMS), UniversiteÂŽ de MontreÂŽal, Quebec C.P. 6128 H3C 3J7, Canada Feeling the beat and meter to the beat frequency. Most importantly, we found that meter imagery elicits an additional frequency tuned

    407

    RFIG lamps: interacting with a self-describing world via photosensing wireless tags and projectors  

    Science Conference Proceedings (OSTI)

    This paper describes how to instrument the physical world so that objects become self-describing, communicating their identity, geometry, and other information such as history or user annotation. The enabling technology is a wireless tag which acts as ... Keywords: augmented reality, human-machine communication, image stabilization, projector, radio frequency identification, stucture from motion

    Ramesh Raskar; Paul Beardsley; Jeroen van Baar; Yao Wang; Paul Dietz; Johnny Lee; Darren Leigh; Thomas Willwacher

    2004-08-01T23:59:59.000Z

    408

    Ultra-low-power components for an RFID Tag with physical and chemical sensors  

    Science Conference Proceedings (OSTI)

    In this work the development and optimization of the main components for a multisensing flexible Tag with RFID communication capabilities and integrated physical and chemical sensors for logistic datalogging applications will be reported. For this specific ... Keywords: Logistics, MOX sensors, RFID, Ultra-low-power

    Stefano Zampolli; Ivan Elmi; Enrico Cozzani; Gian Carlo Cardinali; Andrea Scorzoni; Michele Cicioni; Santiago Marco; Francisco Palacio; Jose M. Gómez-Cama; Ilker Sayhan; Thomas Becker

    2008-03-01T23:59:59.000Z

    409

    Demo: Organic Solar Cell-equipped Energy Harvesting Active Networked Tag (EnHANT) Prototypes  

    E-Print Network (OSTI)

    Demo: Organic Solar Cell-equipped Energy Harvesting Active Networked Tag (EnHANT) Prototypes Gerald their communications and networking parameters to the available environmental energy harvested by the organic solar harvesting, organic solar cells, ultra-low-power com- munications, ultra-wideband impulse radio, energy

    Carloni, Luca

    410

    TAGS 85/2N RTG Power for Viking Lander Capsule  

    DOE R&D Accomplishments (OSTI)

    Results of studies performed by Isotopes, Inc., Nuclear Systems Division, to optimize and baseline a TAGS 85/2N RTG for the Viking Lander Capsule prime electrical power source are presented. These studies generally encompassed identifying the Viking RTG mission profile and design requirements, and establishing a baseline RTG design consistent with these requirements.

    1969-08-00T23:59:59.000Z

    411

    TAGS-85/2N RTG power for Viking Lander Capsule  

    DOE Green Energy (OSTI)

    Results of studies performed by Isotopes, Inc., Nuclear Systems Division, to optimize and baseline a TAGS-85/2N RTG for the Viking Lander Capsule prime electrical power source are presented. These studies generally encompassed identifying the Viking RTG mission profile and design requirements, and establishing a baseline RTG design consistent with these requirements.

    none,

    1969-08-01T23:59:59.000Z

    412

    CEQ NEPA & EMS Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    National Environmental Policy Act Processes with Environmental Management Systems c o u n c i l o n e n v i r o n m e n t a l q u a l i t y A Guide for NEPA and EMS Practitioners a p r i l 2 0 0 7 Preface This guide builds on research and consultations undertaken by the Council on Environmental Quality (CEQ) on the complementary aspects of the National Environmental Policy Act (NEPA) and Environmental Management Systems (EMS). It introduces issues and provides information on how NEPA and EMS can be aligned. This guide does not establish new requirements, does not constitute formal CEQ guidance, and its recommendations should not be considered legally binding. A Guide for NEPA and EMS Practitioners  Aligning National Environmental Policy Act Processes with Environmental Management Systems

    413

    Regulatory Facility Guide for Tennessee  

    Science Conference Proceedings (OSTI)

    This guide provides detailed compilations of international, federal, and state transportation related regulations applicable to shipments originating at or destined to Tennessee facilities. Information on preferred routes is also given.

    Anderson, S.S.; Bock, R.E.; Francis, M.W.; Gove, R.M.; Johnson, P.E.; Kovac, F.M.; Mynatt, J.O. [Oak Ridge National Lab., TN (United States); Rymer, A.C. [Transportation Consulting Services, Knoxville, TN (United States)

    1994-02-28T23:59:59.000Z

    414

    FAQS Reference Guide –Radiation Protection  

    Energy.gov (U.S. Department of Energy (DOE))

    This reference guide has been developed to address the competency statements in the December 2003 edition of DOE-STD-1174-2003, Radiation Protection Functional Area Qualification Standard.

    415

    Interactive troubleshooting guide for accelerators  

    Science Conference Proceedings (OSTI)

    Modern accelerators face the challenge of supporting increased machine complexity and higher levels of utilization while relying on downsized maintenance and support groups. To improve system availability, reduce reliance on system experts and provide a systematic approach to problem solving, an interactive troubleshooting guide has been implemented for the CEBAF injector at Jefferson lab. This guide, which uses a tree structure with appropriate hypertext links, traces problems from a set of symptoms, through a series of diagnostic tests, to a specific corrective action. This guide is used in conjunction with an active parameter monitoring system that is part of the EPICS control system tool kit. The monitoring system generates operator alarms when injector RF or magnet parameters fall outside pre-set windows. Operators receive immediate feedback when injector components vary from their standard values and the troubleshooting guide provides a systematic means to identify and ultimately correct the problem.

    Legg, R.; Dunham, B.; Higgins, S.; Kazimi, R.; Kehne, D.; Oren, T.

    1997-12-01T23:59:59.000Z

    416

    TWO-COLUMN FORMATTING GUIDE  

    Science Conference Proceedings (OSTI)

    This is a guide designed to cover the details of paper preparation to ensure uniformity and continuity for two-column ... printed in black and white. It is best to:.

    417

    4-H Show Lamb Guide  

    E-Print Network (OSTI)

    This pocket guide is a reference for 4-H members who raise show lambs. The manual covers facilities and equipment needs, lamb selection, nutrition, health, management and feeding, fitting and showing.

    Craddock, Frank; Stultz, Ross

    1998-11-30T23:59:59.000Z

    418

    4-H Meat Goat Guide  

    E-Print Network (OSTI)

    This pocket guide is for 4-H members participating in meat goat projects. It covers facilities and equipment needs, goat selection, nutrition, health, management and feeding, fitting and showing.

    Craddock, Frank; Stultz, Ross

    2006-10-30T23:59:59.000Z

    419

    Steam Turbine Performance Engineer's Guide  

    Science Conference Proceedings (OSTI)

    The Steam Turbine Performance Engineer's Guide is meant to present the steam turbine performance engineer with the expected and important functions and responsibilities necessary to succeed in this position that are not necessarily taught in college. The instructions and recommendations in this guide, when properly executed, will improve the effectiveness of steam turbine performance engineers, positively affecting both the performance and reliability of the steam turbines under their care.

    2010-12-23T23:59:59.000Z

    420

    Transmission Structure Foundation Design Guide  

    Science Conference Proceedings (OSTI)

    This guide contains the most current and comprehensive information for the design of foundations for overhead line structures. The guide covers the complete transmission structure foundation design process from the subsurface investigations and design of the foundations, to the construction and inspection of the foundation. Reference documents to assist transmission structure foundation designers in the development of specifications such as for subsurface investigations and foundation construction ...

    2012-11-28T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    421

    Surgically Implanted JSATS Micro-Acoustic Transmitters Effects on Juvenile Chinook Salmon and Steelhead Tag Expulsion and Survival, 2010  

    DOE Green Energy (OSTI)

    The purpose of this study was to evaluate survival model assumptions associated with a concurrent study - Acoustic Telemetry Evaluation of Dam Passage Survival and Associated Metrics at John Day, The Dalles, and Bonneville Dams, 2010 by Thomas Carlson and others in 2010 - in which the Juvenile Salmonid Acoustic Telemetry System (JSATS) was used to estimate the survival of yearling and subyearling Chinook salmon (Oncorhynchus tshawytscha) and steelhead (O. mykiss) migrating through the Federal Columbia River Power System (FCRPS). The micro-acoustic transmitter used in these studies is the smallest acoustic transmitter model to date (12 mm long x 5 mm wide x 4 mm high, and weighing 0.43 g in air). This study and the 2010 study by Carlson and others were conducted by researchers from the Pacific Northwest National Laboratory and the University of Washington for the U.S. Army Corps of Engineers, Portland District, to meet requirements set forth by the 2008 FCRPS Biological Opinion. In 2010, we compared survival, tag burden, and tag expulsion in five spring groups of yearling Chinook salmon (YCH) and steelhead (STH) and five summer groups of subyearling Chinook salmon (SYC) to evaluate survival model assumptions described in the concurrent study. Each tagging group consisted of approximately 120 fish/species, which were collected and implanted on a weekly basis, yielding approximately 600 fish total/species. YCH and STH were collected and implanted from late April to late May (5 weeks) and SYC were collected and implanted from mid-June to mid-July (5 weeks) at the John Day Dam Smolt Monitoring Facility. The fish were collected once a week, separated by species, and assigned to one of three treatment groups: (1) Control (no surgical treatment), (2) Sham (surgical implantation of only a passive integrated transponder [PIT] tag), and (3) Tagged (surgical implantation of JSATS micro-acoustic transmitter [AT] and PIT tags). The test fish were held for 30 days in indoor circular tanks at the Bonneville Dam Juvenile Monitoring Facility. Overall mortality ranged weekly from 45 to 72% for YCH, 55 to 83% for STH, and 56 to 84% for SYC. The high background mortality in all groups and species made it difficult to discern tag effects. However, for YCH, STH, and SYC, the Tagged treatment groups had the highest overall mean mortality - 62%, 79%, and 76%, respectively. Fungal infections were found on 35% of all fish. Mean tag burden for the Tagged treatment group was relatively low for YCH (1.7%) and moderate for SYC (4.2%), while STH had a very low mean tag burden (0.7%). Tag burden was significantly higher in the Tagged treatment group for all species when compared to the Sham treatment group because of the presence of two tags. Surgeon performance did not contribute to the difference in mortality between the Sham and Tagged treatment groups. Tag expulsion from fish that survived to the end of the 30-day experiment was low but occurred in all species, with only two PIT tags and one AT lost, one tag per species. The high background mortality in this experiment was not limited to a treatment, temperature, or month. The decreased number of surviving fish influenced our experimental results and thus analyses. For future research, we recommend that a more natural exposure to monitor tag effects and other factors, such as swimming ability and predator avoidance, be considered to determine the effects of AT- and PIT- implantation on fishes.

    Woodley, Christa M.; Carpenter, Scott M.; Carter, Kathleen M.; Wagner, Katie A.; Royer, Ida M.; Knox, Kasey M.; Kim, Jin A.; Gay, Marybeth E.; Weiland, Mark A.; Brown, Richard S.

    2011-09-16T23:59:59.000Z

    422

    CALIFORNIA ENERGY Small HVAC System Design Guide  

    E-Print Network (OSTI)

    CALIFORNIA ENERGY COMMISSION Small HVAC System Design Guide DESIGNGUIDELINES October 2003 500;#12;Small HVAC System Design Guide Acknowledgements i Acknowledgements The products and outcomes presented; Darren Goody, PECI, Design Guide review. #12;Small HVAC System Design Guide Preface ii Preface The Small

    423

    Generator Bushing Installation and Maintenance Guide  

    Science Conference Proceedings (OSTI)

    This report is a comprehensive guide to generator high-voltage bushing (HVB) installation and maintenance.

    2008-12-04T23:59:59.000Z

    424

    OPAM Policy Acquisition Guides | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    33 - Protests, Disputes and Appeals Chapter 1 - Acquisition Regulations System OPAM Policy Acquisition Guides...

    425

    OPAM Policy Acquisition Guides | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    26 - Other Socioeconomic Programs OPAM Policy Acquisition Guides Chapter 34 - Major Systems Acquisition...

    426

    The Integrated Environmental Strategies Handbook: A Resource Guide for Air  

    Open Energy Info (EERE)

    The Integrated Environmental Strategies Handbook: A Resource Guide for Air The Integrated Environmental Strategies Handbook: A Resource Guide for Air Quality Planning Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: The Integrated Environmental Strategies Handbook: A Resource Guide for Air Quality Planning Agency/Company /Organization: United States Environmental Protection Agency Complexity/Ease of Use: Moderate Website: nepis.epa.gov/Exe/ZyPDF.cgi?Dockey=P10033EF.PDF Cost: Free References: EPA (US Environmental Protection Agency). 2004. The Integrated Environmental Strategies Handbook. EPA430-B-04-006. Washington, DC. Office of Air and Radiation.[1] Related Tools Integrated Model to Access the Global Environment

    427

    Finding Meaning on YouTube: Tag Recommendation and Category Discovery George Toderici Hrishikesh Aradhye Marius Pasca Luciano Sbaiz Jay Yagnik  

    E-Print Network (OSTI)

    in the description and the terms waverunner, big jump, superman and porn in the tags (in a typical scenario). Yet

    Cortes, Corinna

    428

    A University of Texas Arlington group has developed a passive RFID tag and reader for wirelessly detecting the presence of stomach acid, gas and water in the esophagus.  

    E-Print Network (OSTI)

    Researchers Develop RFID System to Monitor Acid Reflux Jung-Chih Chiao RELATED ARTICLES >Tags Track Surgical

    Chiao, Jung-Chih

    429

    Solid-State Lighting: Product Performance Guides  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Product Performance Guides to Product Performance Guides to someone by E-mail Share Solid-State Lighting: Product Performance Guides on Facebook Tweet about Solid-State Lighting: Product Performance Guides on Twitter Bookmark Solid-State Lighting: Product Performance Guides on Google Bookmark Solid-State Lighting: Product Performance Guides on Delicious Rank Solid-State Lighting: Product Performance Guides on Digg Find More places to share Solid-State Lighting: Product Performance Guides on AddThis.com... Conferences & Meetings Presentations Publications Postings Articles Program Fact Sheets Technology Fact Sheets CALiPER Reports GATEWAY Reports LED Lighting Facts Reports Project Reports Studies and Reports Technology Roadmaps Product Performance Guides Webcasts Videos Tools Product Performance Guides

    430

    First responder information flow simulation: a tool for technology assessment  

    Science Conference Proceedings (OSTI)

    New information technology is becoming available for first responders at a rapid rate. Often this new technology comes with not only new capabilities but also a high price tag. Policy makers and emergency managers need a way to assess which portfolio ...

    C. Donald Robinson; Donald E. Brown

    2005-12-01T23:59:59.000Z

    431

    Table of Contents for Desk Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Real Estate Desk Guide Real Estate Desk Guide Revised May, 2013 U. S. Department of Energy - Real Estate Desk Guide Revised 2013 Real Estate Desk Guide Table of Contents Chapter 1-- Purpose of Desk Guide ........................................................................ 1 Chapter 2-- Introduction ......................................................................................... 3 Chapter 3-- Planning Policy .................................................................................... 7 Chapter 4-- Real Estate Function ......................................................................... 10 Chapter 5-- Acquisition of Interests in Real Property ........................................ 14 Chapter 6-- Acquisition by Lease ......................................................................... 34

    432

    Model Year 1999 Fuel Economy Guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    FUEL FUEL ECONOMY GUIDE MODEL YEAR 1999 DOE/EE-0178 Fuel Economy Estimates October 1998 1 CONTENTS PAGE Purpose of the Guide ..................................................... 1 Interior Volume ................................................................ 1 How the Fuel Economy Estimates are Obtained ........... 1 Factors Affecting MPG .................................................... 2 Fuel Economy and Climate Change ............................... 2 Gas Guzzler Tax ............................................................. 2 Vehicle Classes Used in This Guide. .............................. 2 Annuel Fuel Costs .......................................................... 3 How to Use the Guide .................................................... 4 Where to Re-order Guides

    433

    Table of Contents for Desk Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Real Estate Desk Guide Real Estate Desk Guide Revised May, 2013 U. S. Department of Energy - Real Estate Desk Guide Revised 2013 Real Estate Desk Guide Table of Contents Chapter 1-- Purpose of Desk Guide ........................................................................ 1 Chapter 2-- Introduction ......................................................................................... 3 Chapter 3-- Planning Policy .................................................................................... 7 Chapter 4-- Real Estate Function ......................................................................... 10 Chapter 5-- Acquisition of Interests in Real Property ........................................ 14 Chapter 6-- Acquisition by Lease ......................................................................... 34

    434

    Overhead Conductor Management Guide  

    Science Conference Proceedings (OSTI)

    As transmission systems age, utilities are increasingly concerned about the reliability of aging conductors, especially ACSR conductors, which cannot be assessed visually because of the layers of aluminum strand that cover their cores. Utilities wishing to determine how much core strength remains in these conductors can only do so by sampling the conductor and subsequently subjecting it to tensile testing or by looking at the significant circuits that pose a reliability risk using the Cormon Device or El...

    2010-12-23T23:59:59.000Z

    435

    Guide to Clean Development Mechanism Projects Related to Municipal Solid  

    Open Energy Info (EERE)

    Guide to Clean Development Mechanism Projects Related to Municipal Solid Guide to Clean Development Mechanism Projects Related to Municipal Solid Waste Management Jump to: navigation, search Tool Summary Name: A Guide to Clean Development Mechanism Projects Related to Municipal Solid Waste Management Agency/Company /Organization: United Nations Economic and Social Commission for Asia and the Pacific Sector: Energy, Land Focus Area: - Landfill Gas, - Waste to Energy Topics: Implementation, Co-benefits assessment Resource Type: Guide/manual, Lessons learned/best practices Website: www.unescap.org/esd/environment/publications/cdm/Guide.pdf UN Region: Central Asia, Eastern Asia, South-Eastern Asia, "Pacific" is not in the list of possible values (Eastern Africa, Middle Africa, Northern Africa, Southern Africa, Western Africa, Caribbean, Central America, South America, Northern America, Central Asia, Eastern Asia, Southern Asia, South-Eastern Asia, Western Asia, Eastern Europe, Northern Europe, Southern Europe, Western Europe, Australia and New Zealand, Melanesia, Micronesia, Polynesia, Latin America and the Caribbean) for this property.

    436

    Program: Self-Guided Tours  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Self-Guided Tours Self-Guided Tours Description: The following options are currently available to visitors who do not plan to take a guided tour. Wilson Hall If permitted by the current security conditions, visitors to the laboratory are welcome to visit the ground floor and atrium of Wilson Hall, the 16-story administrative building. The atrium offers an exhibit, a cafeteria and an information desk. The floors 2 to 16 are closed to the public. To take a tour of the 15th-floor viewing area, please sign up for a guided tour (see information above). Prairie Trails and Buffalo Viewing If permitted by the current security conditions, visitors to the lab can walk along a couple of prairie trails near the Pine Street entrance (west side of the lab) including the Margaret Pearson Interpretive Trail, a quarter mile self-guiding nature trail through a portion of Fermilab's restored prairie. Located on the north side of the Pine Street exit of the site, the trail is open to the public daily from 6:00 AM to 8 PM.

    437

    EERE Program Management Guide - Appendix H  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    H H Model Senior Executive Services Performance Appraisal H-1 December 2007 http://www1.eere.energy.gov/ba/prog_mgmt_guide.html SAMPLE EERE Program Management Guide Appendix H-Model Senior Executive Service Performance Appraisal December 2007 http://www1.eere.energy.gov/ba/prog_mgmt_guide.html SAMPLE H-2 EERE Program Management Guide Appendix H-Model Senior Executive Service Performance Appraisal December 2007 http://www1.eere.energy.gov/ba/prog_mgmt_guide.html SAMPLE H-3 EERE Program Management Guide Appendix H-Model Senior Executive Service Performance Appraisal December 2007 http://www1.eere.energy.gov/ba/prog_mgmt_guide.html SAMPLE H-4 EERE Program Management Guide Appendix H-Model Senior Executive Service Performance Appraisal December 2007 http://www1.eere.energy.gov/ba/prog_mgmt_guide.html

    438

    Building Technologies Office: Advanced Energy Design Guides  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Energy Design Energy Design Guides to someone by E-mail Share Building Technologies Office: Advanced Energy Design Guides on Facebook Tweet about Building Technologies Office: Advanced Energy Design Guides on Twitter Bookmark Building Technologies Office: Advanced Energy Design Guides on Google Bookmark Building Technologies Office: Advanced Energy Design Guides on Delicious Rank Building Technologies Office: Advanced Energy Design Guides on Digg Find More places to share Building Technologies Office: Advanced Energy Design Guides on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score Energy Modeling Software

    439

    Wave guide impedance matching method and apparatus  

    DOE Patents (OSTI)

    A technique for modifying the end portion of a wave guide, whether hollow or solid, carrying electromagnetic, acoustic or optical energy, to produce a gradual impedance change over the length of the end portion, comprising the cutting of longitudinal, V-shaped grooves that increase in width and depth from beginning of the end portion of the wave guide to the end of the guide so that, at the end of the guide, no guide material remains and no surfaces of the guide as modified are perpendicular to the direction of energy flow. For hollow guides, the grooves are cut beginning on the interior surface; for solid guides, the grooves are cut beginning on the exterior surface. One or more resistive, partially conductive or nonconductive sleeves can be placed over the exterior of the guide and through which the grooves are cut to smooth the transition to free space.

    Kronberg, James W. (Beech Island, SC)

    1990-01-01T23:59:59.000Z

    440

    Wave guide impedance matching method and apparatus  

    DOE Patents (OSTI)

    A technique for modifying the end portion of a wave guide, whether hollow and solid, carrying electromagnetic, acoustic or optical energy, to produce a gradual impedance change over the length of the end portion, comprising the cutting of longitudinal, V-shaped grooves that increase in width and depth from beginning of the end portion of the wave guide to the end of the guide so that, at the end of the guide, no guide material remains and no surfaces of the guide as modified are perpendicular to the direction of energy flow. For hollow guides, the grooves are cut beginning on the interior surface; for solid guides, the grooves are cut beginning on the exterior surface. One or more resistive, partially conductive or nonconductive sleeves can be placed over the exterior of the guide and through which the grooves are cut to smooth the transition to free space.

    Kronberg, J.W.

    1989-05-12T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    441

    EERE Program Management Guide - Appendix E  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    E E Suggested Framework for Merit Review Program Evaluation How should the quality of Energy Efficiency and Renewable Energy (EERE) programs and projects be assessed? What role should advisory committees play in both formulating and evaluating the EERE programs? What is the role of merit and peer review in the decision-making process? Is a uniform merit and peer review process necessary or desirable? Is merit and peer review a guide or determinant to the Program Manager? At what stage in the decision- making process do programmatic and societal considerations come into play? How should the need to meet broader, non-technical goals influence EERE's priorities? How can the effectiveness, productivity, and impact of the EERE programs be measured?

    442

    Homebuilder's Guide to Going Solar (Brochure)  

    DOE Green Energy (OSTI)

    A Homebuilder's Guide to Going Solar is designed to help you assess the benefits to your business and customers of installing solar equipment or making your houses solar-ready. The information comes from studies of builders who have successfully integrated solar into their operations as well as conversations with builders and solar professionals. These studies and conversations indicate that builders want to know: (1) Do solar economics work in my area? (2) If not, are there other reasons to go solar?; and (3) Is there a local support system of solar professionals I can call on to help me integrate solar seamlessly into my projects? This effort to educate builders about solar is a work in progress.

    Not Available

    2008-04-01T23:59:59.000Z

    443

    CAPITAL PROGRAMMING GUIDE (PART 7)  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    CAPITAL PROGRAMMING GUIDE CAPITAL PROGRAMMING GUIDE V 2.0 SUPPLEMENT TO OFFICE OF MANAGEMENT AND BUDGET CIRCULAR A-11, PART 7: PLANNING, BUDGETING, AND ACQUISITION OF CAPITAL ASSETS JUNE 2006 CAPITAL PROGRAMMING GUIDE LIST OF ABBREVIATIONS LIST OF ABBREVIATIONS ACP Agency Capital Plan CI Commercial Items COTS Commercial-off-the-shelf ESPC Energy Savings Performance Contract EVM Earned Value Management FAR Federal Acquisition Regulation FARA Federal Acquisition Reform Act (Clinger-Cohen Act) of 1996 1 (Division D of Pub. L. No. 104-106) FASA Federal Acquisition Streamlining Act of 1994 (Pub. L. No. 103-355) FRPC Federal Real Property Council GAO Government Accountability Office GPRA Government Performance and Results Act of 1993 (Pub. L. No. 103-62)

    444

    Method of tagging sand with ruthenium-103 and the resultant product  

    DOE Patents (OSTI)

    A procedure for tagging sand with a radioisotope for use in the study of sediment transport involves the precipitation of a metal radioisotope in the form of an iodide directly on the sand, followed by heating the sand to a temperature sufficient to effect a phase transformation of the sand and a decomposition of the metal iodide, leaving the metal firmly attached to the sand.

    Case, Forrest N. (Oak Ridge, TN); McFarland, Clyde E. (Knoxville, TN)

    1976-01-01T23:59:59.000Z

    445

    An Integrated RFID and Barcode Tagged Item Inventory System for Deployment at New Brunswick Laboratory  

    Science Conference Proceedings (OSTI)

    New Brunswick Laboratory (NBL) has a numerous inventory containing thousands of plutonium and uranium certified reference materials. The current manual inventory process is well established but is a lengthy process which requires significant oversight and double checking to ensure correctness. Oak Ridge National Laboratory has worked with NBL to develop and deploy a new inventory system which utilizes handheld computers with barcode scanners and radio frequency identification (RFID) readers termed the Tagged Item Inventory System (TIIS). Certified reference materials are identified by labels which incorporate RFID tags and barcodes. The label printing process and RFID tag association process are integrated into the main desktop software application. Software on the handheld computers syncs with software on designated desktop machines and the NBL inventory database to provide a seamless inventory process. This process includes: 1) identifying items to be inventoried, 2) downloading the current inventory information to the handheld computer, 3) using the handheld to read item and location labels, and 4) syncing the handheld computer with a designated desktop machine to analyze the results, print reports, etc. The security of this inventory software has been a major concern. Designated roles linked to authenticated logins are used to control access to the desktop software while password protection and badge verification are used to control access to the handheld computers. The overall system design and deployment at NBL will be presented. The performance of the system will also be discussed with respect to a small piece of the overall inventory. Future work includes performing a full inventory at NBL with the Tagged Item Inventory System and comparing performance, cost, and radiation exposures to the current manual inventory process.

    Younkin, James R [ORNL; Kuhn, Michael J [ORNL; Gradle, Colleen [New Brunswick Laboratory, Argonne, IL; Preston, Lynne [U.S. Department of Energy, Office of Health, Safety and Security; Thomas, Brigham B. [ORNL; Laymance, Leesa K [ORNL; Kuziel, Ron [DOE SC - Chicago Office

    2012-01-01T23:59:59.000Z

    446

    Australia's Green Vehicle Guide | Open Energy Information  

    Open Energy Info (EERE)

    Australia's Green Vehicle Guide Australia's Green Vehicle Guide Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Australia's Green Vehicle Guide Agency/Company /Organization: Commonwealth of Australia Focus Area: Vehicles, Fuel Efficiency Topics: Analysis Tools, Market Analysis Website: www.greenvehicleguide.gov.au/GVGPublicUI/home.aspx Equivalent URI: cleanenergysolutions.org/content/australias-green-vehicle-guide,http:/ Language: English Policies: Regulations Regulations: Fuel Efficiency Standards The Green Vehicle Guide provides information about the environmental performance of new light-duty vehicles sold in Australia, including carbon dioxide (CO2) emissions and fuel consumption. The Guide includes resources such as a fuel calculator, electric vehicle information and a truck buyers

    447

    Expert system for identification of simultaneous and sequential reactor fuel failures with gas tagging  

    DOE Patents (OSTI)

    Failure of a fuel element in a nuclear reactor core is determined by a gas tagging failure detection system and method. Failures are catalogued and characterized after the event so that samples of the reactor's cover gas are taken at regular intervals and analyzed by mass spectroscopy. Employing a first set of systematic heuristic rules which are applied in a transformed node space allows the number of node combinations which must be processed within a barycentric algorithm to be substantially reduced. A second set of heuristic rules treats the tag nodes of the most recent one or two leakers as background'' gases, further reducing the number of trial node combinations. Lastly, a fuzzy'' set theory formalism minimizes experimental uncertainties in the identification of the most likely volumes of tag gases. This approach allows for the identification of virtually any number of sequential leaks and up to five simultaneous gas leaks from fuel elements. 14 figs.

    Gross, K.C.

    1994-07-26T23:59:59.000Z

    448

    Protocol, Appraisal Process Guide - April 2008 | Department of...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Appraisal Process Guide - April 2008 Protocol, Appraisal Process Guide - April 2008 April 2008 Emergency Management Oversight Appraisal Process Guide Emergency Management Oversight...

    449

    Oil Study Guide - High School | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    High School Oil Study Guide - High School Oil Study Guide - High School More Documents & Publications Oil Study Guide - Middle School Fossil Energy Today - First Quarter, 2012...

    450

    Natural Gas Study Guide - Middle School | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Natural Gas Study Guide - Middle School Natural Gas Study Guide - Middle School More Documents & Publications Shale Gas Glossary Oil Study Guide - Middle School What is shale gas?...

    451

    Self-benchmarking Guide for Data Centers: Metrics, Benchmarks, Actions  

    E-Print Network (OSTI)

    Purpose This guide describes energy efficiency metrics andthe energy benchmarking approach describe in this guide candesigners and energy managers. This guide also builds on

    Mathew, Paul

    2010-01-01T23:59:59.000Z

    452

    An energy efficiency guide for use in cleanroom programming  

    E-Print Network (OSTI)

    unoccupied. CLEANROOM ENERGY PROGRAMMING GUIDE References P.1995. CLEANROOM ENERGY PROGRAMMING GUIDE Useful Links andLBNL-49223 AN ENERGY EFFICIENCY GUIDE for use in CLEANROOM

    Tschudi, Bill; Xu, Tengfang; Sartor, Dale

    2001-01-01T23:59:59.000Z

    453

    IGCA Inventory Sub Guide 040512 | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Inventory Sub Guide 040512 IGCA Inventory Sub Guide 040512 IGCAInventorySubGuide040512.pdf More Documents & Publications OFFICE OF PROCUREMENT & ASSISTANCE MANAGEMENT O:...

    454

    Microsoft Word - IGCA Inventory Sub Guide 031611 | Department...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    IGCA Inventory Sub Guide 031611 Microsoft Word - IGCA Inventory Sub Guide 031611 Microsoft Word - IGCA Inventory Sub Guide 031611 More Documents & Publications Job Counting...

    455

    Revised Wet Stack Design Guide  

    Science Conference Proceedings (OSTI)

    For the past 14 years, the design of wet stacks around the world has been guided by the original EPRI Wet Stacks Design Guide (1996). Since that time, the number of wet stack installations has grown considerably, and a wealth of practical real-world operating and maintenance experience has been obtained. The laws of physics have not changed, and most of the information presented in 1996 is just as valid today as it was when originally published. What has changed is the power-generation ...

    2012-12-12T23:59:59.000Z

    456

    Project RetroTech. Home weatherization instructor's guide  

    SciTech Connect

    A guide to instructors in developing lesson plans for a home weatherization course that promotes the use of known retrofit technology to improve thermal characteristics and conserve energy in residential housing is presented. The aim of the program is to train personnel involved at the state and program level in the DOE Weatherization Assistance Program in the methods of assessing priorities for weatherization meaasures on existing residential housing.

    1979-07-01T23:59:59.000Z

    457

    Acta Cryst. (2001). D57, 759762 Kim et al. Post-translational modification of His tag 759 short communications  

    E-Print Network (OSTI)

    were analyzed by either tricine SDS±PAGE (Schagger & von Jagow, 1987) or PhastGel gradient 8±25 on a PHAST system (Amersham Pharmacia Biotech). The cleavage of the His tag as well as the isoelectric points

    Baker, David

    458

    Evaluation of Fish Movements, Migration Patterns, and Population Abundance with Streamwidth PIT Tag Interrogation Systems, Final Report 2002.  

    DOE Green Energy (OSTI)

    Two remote Streamwidth PIT tag Interrogation systems (SPIs) were operated continuously for over one year to test the feasibility of these systems for generating movement, migration, survival and smolt production estimates for salmonids. A total of 1,588 juvenile (< 100 mm FL) naturally produced salmonids (7 coho salmon, 482 cutthroat trout, and 1,099 steelhead) were PIT tagged above the upstream-most SPI (9 sites approximately 1 linear km each) in Fall 2001. Age at tagging for wild caught cutthroat and steelhead was 1 year. SPIs were operating before any PIT tagged fish were released in the creek. Over 390,000 detections were recorded from October 2001 to 31 July 2002. Efficiencies were site dependent, but overall detection efficiency for the creek was 97% with 95% confidence intervals of 91-100%. PIT tag detection efficiency ranged from 55-100% depending on the SPI and varied throughout the year with average efficiencies of 73% and 89%. SPI efficiency of PIT tag detection was not completely dependent on electronics noise levels or environmental conditions. Fish from all tagging locations were detected at the SPIs. Steelhead and cutthroat trout were primarily detected moving in the Spring (April-June) coincident with the anticipated smolt migration. Steelhead were also detected moving past SPIs at lower numbers in the Fall and Winter. Travel time between SPIs (downstream movement) was highly dependent on time of year. Travel time in the Spring was significantly faster (34.4 {+-} 7.0 hours) for all species than during any other time of year (763.1 {+-} 267.0 hours). Steelhead and cutthroat migrating in the Spring were the same age as those that did not migrate in the Spring. Peak of steelhead migration recorded at the two SPIs was 5/11 and 5/12 and the peak in the screw trap was recorded on 5/17. Steelhead smolt production estimates using SPIs (3,802 with 95% confidence intervals of 3,440 - 4,245) was similar to those using more standard screw trap methods (approximately 5,400). All species used the faster moving/deeper section of the creek at both SPIs. A backpack PIT tag detector was also developed and used as another remote 'recapture' for additional accuracy in estimating population survival and recapture probability. This unit was used at an approximate efficiency of 24% to survey the creek after the Spring migration. Twenty-five individual fish were re-located. All PIT tag data were used to calculate survival and recapture probabilities using the Cormack-Jolly-Seber population model. Survival for steelhead was high and recapture probability depended greatly on season. Probability of recapture was highest in Spring (29.5%) and relatively low in all other seasons (< 7% in Fall, Winter, and Summer). Wild steelhead PIT tagged in the field and returned to the laboratory had a tag retention rate of 97.6%. A laboratory study was designed to determine the effects of 3-sized PIT tags (12 mm, 20 mm, and 23 mm) on survival and growth of individuals. Survival from surgical implantation of 23 mm PIT tags was > 98% for fish (coho salmon and steelhead). Retention of 23 mm PIT tags was 100% for coho salmon and 89% for steelhead. For both coho and steelhead, growth rates during the first month were affected by tagging, but by the end of 2 months growth effects equalized for all tag sizes. Life history characteristics quantified with SPI techniques are comparable to standard techniques. For example, peaks of Spring migration for steelhead and cutthroat were amazingly similar to those reported from the screw trap. These techniques will enable application of less laborious methods which are more accurate at estimating life history parameters.

    Zydlewski, Gayle; Winter, Christiane; McClanahan, Dee

    2003-02-01T23:59:59.000Z

    459

    Energy Design Guides for Army Barracks: Preprint  

    Science Conference Proceedings (OSTI)

    The U.S. Army Corps of Engineers and NREL are developing target energy budgets and design guides to achieve 30% energy savings. This paper focuses the design guide for one type of barracks called unaccompanied enlisted personal housing.

    Deru, M.; Zhivov, A.; Herron, D.

    2008-08-01T23:59:59.000Z

    460

    State of Emergency: Official Strategy Guide  

    Science Conference Proceedings (OSTI)

    From the Publisher:BradyGames State of Emergency Official Strategy Guide provides detailed strategies for missions in the game. The guide also contains a comprehensive walkthrough, including in-depth coverage of weapons and characters. Secrets ...

    Bart Farkas

    2002-01-01T23:59:59.000Z

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    461

    DOE VPN Client User Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    VPN Client VPN Client User Guide November 2013 U.S. Department of Energy Table of Contents Introduction ................................................................... 3 System Requirements ................................................... 3 Microsoft Windows ........................................................ 3 Mac OS X...................................................................... 4 Windows ......................................................................... 5 Installation for the Cisco AnyConnect Client ................... 5 Disconnecting from the Cisco AnyConnect Client ........... 8 Reconnecting to the Cisco AnyConnect Client ................ 9 Mac OS X ...................................................................... 10

    462

    Quickstart Guide | Open Energy Information  

    Open Energy Info (EERE)

    Quickstart Guide Quickstart Guide Jump to: navigation, search OpenEI.jpg Contents 1 OpenEI Quick-Start Guide 1.1 Creating and Editing OpenEI Pages 1.1.1 Core content policies 1.1.2 Creating an account 1.1.3 Creating and editing pages 1.1.4 Spanish-language page tracking 1.1.5 Help 1.1.6 OpenEI Discussion Group 1.2 Monitoring OpenEI Pages 1.2.1 Monitoring new pages and page changes 1.2.2 Managing a Wiki Watchlist 1.3 Participating in the OpenEI Community OpenEI Quick-Start Guide Creating and Editing OpenEI Pages Core content policies Before you begin creating or editing pages, please review the OpenEI core content policies. In brief, OpenEI content should meet the following guidelines: Neutral Point of View: Content added must give a neutral, unbiased viewpoint. Verifiability: Content must give attribution back to its source.

    463

    UPS Maintenance and Application Guide  

    Science Conference Proceedings (OSTI)

    Uninterruptible Power Supplies (UPS) are used in nuclear power plants to provide a reliable source of power to control, protection, data collection, and safety systems. Failure of a UPS to perform as intended can result in lost plant capacity and, in the extreme case, a malfunction of a plant's safety system. This guide provides recommendations which will help ensure reliable operation of UPS systems.

    1994-08-10T23:59:59.000Z

    464

    Visitor Guide to Smart Security  

    E-Print Network (OSTI)

    Visitor Guide to Smart Security The following articles are prohibited on LANL property, including and are not allowed in Limited Security Areas or above: · personal computers and associated media (including palm- top capabilities, unless disabled). Note 1: Government cell phones are allowed into Security Areas as long

    465

    Wind Energy Information Guide 2004  

    DOE Green Energy (OSTI)

    The guide provides a list of contact information and Web site addresses for resources that provide a range of general and technical information about wind energy, including general information, wind and renewable energy, university programs and research institutes, international wind energy associations and others.

    anon.

    2004-01-01T23:59:59.000Z

    466

    Energy Efficiency Best Practice Guide©  

    E-Print Network (OSTI)

    'Setting the bar above mere mediocrity!' The goal of the Energy Efficiency (EE) Best Practice Guide is to help business units meet and exceed their energy efficiency targets through continuous improvement using seven key criteria. The objectives are threefold: -to provide an easy-to-use structure for measuring relative energy performance; -to identify key success and gap areas; and -to quantify seven key criteria. The seven criteria describe how they can help define best practices. The Guide is intended to compliment and enhance existing programs rather than 'layer on' additional work. The Guide was developed from experience and lessons learned from: • The Alliance to Save Energy's work on best practices; • Ontario Power Generation's Energy Efficiency Program from 1994 to 2000; and • A variety of sources including other companies that demonstrate EE best practices. The criteria are sufficiently generic to apply across business units and are applicable to most situations. The Guide must continually evolve from experience and new lessons learned. Feedback from business units, project experience, and from other industrial leaders will be encouraged and sought after. Your thoughts and comments are appreciated -please email Scott Rouse at: srouse@OntarioPowerGeneration.com

    Rouse, S.

    2001-05-01T23:59:59.000Z

    467

    E & MJ buyers guide 2009  

    Science Conference Proceedings (OSTI)

    The guide lists over 1000 companies supplying equipment and services to mines and mills worldwide. It consists of a product classification section giving the name(s) and telephone numbers of manufacturers. The manufacturers are predominantly based in the USA although other worldwide companies are included.

    NONE

    2008-11-15T23:59:59.000Z

    468

    INLAND PORT TRANSPORTATION EVALUATION GUIDE  

    E-Print Network (OSTI)

    INLAND PORT TRANSPORTATION EVALUATION GUIDE by Robert Harrison, Center for Transportation Research Transportation Institute, The Texas A&M University System; and Jolanda Prozzi, Center for Transportation Research, The University of Texas at Austin CENTER FOR TRANSPORTATION RESEARCH Bureau of Engineering Research

    Texas at Austin, University of

    469

    E & MJ Buyers Guide 2007  

    Science Conference Proceedings (OSTI)

    The guide lists over 1000 companies supplying equipment and services to mines and mills worldwide. It consists of a product classification section giving the name(s) and telephone numbers of manufacturers. The manufacturers are predominantly based in the USA although other worldwide companies are included.

    NONE

    2007-11-15T23:59:59.000Z

    470

    Coal Age buyers guide 2007  

    SciTech Connect

    The buyers guide provides a comprehensive list of more than 1,200 suppliers that provide equipment and services to US coal mine and coal preparation plants, mainly based in the USA. Telephone numbers of companies are provided for each product category.

    NONE

    2007-07-15T23:59:59.000Z

    471

    2009 coal preparation buyer's guide  

    Science Conference Proceedings (OSTI)

    The guide contains brief descriptions and contact details of 926 US companies supplying coal preparation equipment who exhibited at the 26th annual Coal Prep exhibition and conference, 28-30 April - May 2009, in Lexington, KY, USA. An index of categories of equipment available from the manufacturers is included.

    NONE

    2009-04-15T23:59:59.000Z

    472

    Field Guide: Bearing Damage Mechanisms  

    Science Conference Proceedings (OSTI)

    Electric Power Research Institute (EPRI) report 1021780, Manual of Bearing Failures and Repair in Power Plant Rotating Equipment, 2011 Update, is a comprehensive document on the subject of fluid film bearing damage modes. This field guide provides a pocket reference based upon the content of that report. ...

    2012-11-06T23:59:59.000Z

    473

    Double Bottom Line Project Report:Assessing Social Impact In Double Bottom Line Ventures  

    E-Print Network (OSTI)

    Ongoing Assessment of Social Impact (OASIS) rubicon programsHall, 1996). poverty and social impact analysis (psia) Datas Guide to Poverty and Social Impact Analysis” (World Bank,

    Rosenzweig, William

    2004-01-01T23:59:59.000Z

    474

    User's Guide Virtual Hydropower Prospector Version 1.1  

    Science Conference Proceedings (OSTI)

    The Virtual Hydropower Prospector is a web-based geographic information system (GIS) application for displaying U.S. water energy resource sites on hydrologic region maps. The application assists the user in locating sites of interest and performing preliminary, development feasibility assessments. These assessments are facilitated by displaying contextual features in addition to the water energy resource sites such as hydrograpy, roads, power infrastructure, populated places, and land use and control. This guide provides instructions for operating the application to select what features are displayed and the extent of the map view. It also provides tools for selecting features of particular interest and displaying their attribute information.

    Douglas G. Hall; Sera E. White; Julie A. Brizzee; Randy D. Lee

    2005-11-01T23:59:59.000Z

    475

    2008 Underground/Longwall Mining Buyer's Guide  

    Science Conference Proceedings (OSTI)

    The guide lists US companies supplying equipment and services to mines. An index by product category is included.

    NONE

    2008-06-15T23:59:59.000Z

    476

    2009 underground/longwall mining buyer's guide  

    Science Conference Proceedings (OSTI)

    The guide lists US companies supplying equipment and services to underground mining operations. An index by product category is included.

    NONE

    2009-06-15T23:59:59.000Z

    477

    OPAM Policy Acquisition Guides | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Chapter 1 - Acquisition Regulations System Microsoft Word - AcqGuide7pt1.doc Chapter 18 - Emergency Acquisitions...

    478

    OPAM Policy Acquisition Guides | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Chapter 1 - Acquisition Regulations System OPAM Policy Acquisition Guides Microsoft Word - FedComplianceCritChecklist.doc...

    479

    OPAM Policy Acquisition Guides | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Policy Flash 2013-45 Source Selection Guide Chapter 15 - Contracting by Negotiation Attachment FY2011-19(2) OPAM...

    480

    AcqGuide9pt1.doc | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    pt1.doc&0; AcqGuide9pt1.doc&0; AcqGuide9pt1.doc&0; More Documents & Publications Chapter 9 - Contracting Qualifications AcqGuide3pt1.doc&0; OPAM Policy Acquisition Guides...

    Note: This page contains sample records for the topic "assessment guide tag" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    481

    Industrial Energy Efficient Technology Guide 2007  

    Science Conference Proceedings (OSTI)

    This report updates the Industrial Energy Efficient Technology Reference Guide, previously known as the Electrotechnology Reference Guide. The last version of the Electrotechnology Reference Guide was published in 1992. This 2007 edition specifically updates information on industrial-sector energy consumption and the status of energy efficient technologies.

    2007-07-31T23:59:59.000Z

    482

    Microsoft Word - AcqGuide16pt1 Nov 2010  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Chapter 16.1 (November 2010) General Guide To Contract Types For Requirements Officials Acquisition Guide --- --- Chapter 16.1...

    483

    DOE interpretations Guide to OSH standards. Update to the Guide  

    SciTech Connect

    Reflecting Secretary O`Leary`s focus on occupational safety and health, the Office of Occupational Safety is pleased to provide you with the latest update to the DOE Interpretations Guide to OSH Standards. This Guide was developed in cooperation with the Occupational Safety and Health Administration, which continued it`s support during this last revision by facilitating access to the interpretations found on the OSHA Computerized Information System (OCIS). This March 31, 1994 update contains 123 formal in letter written by OSHA. As a result of the unique requests received by the 1-800 Response Line, this update also contains 38 interpretations developed by DOE. This new occupational safety and health information adds still more important guidance to the four volume reference set that you presently have in your possession.

    Not Available

    1994-03-31T23:59:59.000Z

    484

    DOE interpretations Guide to OSH standards. Update to the Guide  

    Science Conference Proceedings (OSTI)

    Reflecting Secretary O`Leary`s focus on occupational safety and health, the Office of Occupational Safety is pleased to provide you with the latest update to the DOE Interpretations Guide to OSH Standards. This Guide was developed in cooperation with the Occupational Safety and Health Administration, which continued its support during this last revision by facilitating access to the interpretations found on the OSHA Computerized Information System (OCIS). This March 31, 1994 update contains 123 formal interpretation letters written OSHA. As a result of the unique requests received by the 1-800 Response Line, this update also contains 38 interpretations developed by DOE. This new occupational safety and health information adds still more important guidance to the four volume reference set that you presently have in your possession.

    Not Available

    1994-03-31T23:59:59.000Z

    485

    DOE interpretations Guide to OSH standards. Update to the Guide  

    Science Conference Proceedings (OSTI)

    Reflecting Secretary O`Leary`s focus on occupational safety and health, the Office of Occupational Safety is pleased to provide you with the latest update to the DOE Interpretations Guide to OSH Standards. This Guide was developed in cooperation with the Occupational Safety and Health Administration, which continued its support during this last revision by facilitating access to the interpretations found on the OSHA Computerized Information System (OCIS). This March 31, 1994 update contains 123 formal interpretation letters written by OSHA. As a result of the unique requests received by the 1-800 Response Line, this update also contains 38 interpretations developed by DOE. This new occupational safety and health information adds still more important guidance to the four volume reference set that you presently have in your possession.

    Not Available

    1994-03-31T23:59:59.000Z

    486

    Tag: employees  

    NLE Websites -- All DOE Office Websites (Extended Search)

    6/all en Oscillograph 6/all en Oscillograph http://www.y12.doe.gov/oscillograph

    Employees operate oscillograph.
  • Read more about Oscillograph Fri, 01 Feb 2013 22:41:24 +0000 ken 880 at http://www.y12.doe.gov Y-12 Administration and Labor Relations building

  • 487

    TAGGING CO  

    NLE Websites -- All DOE Office Websites (Extended Search)

    system will show that 14 C can be a safe and effective tracer for sequestered CO 2 . A laser-based 14 C measurement method is being adapted for continuous monitoring. This...

    488

    Performance Assessment of Bi-Directional Knotless Tissue-Closure Devices in Juvenile Chinook Salmon Surgically Implanted with Acoustic Transmitters, 2009 - Final Report  

    SciTech Connect

    The purpose of this report is to assess the performance of bi-directional knotless tissue-closure devices for use in tagging juvenile salmon. This study is part of an ongoing effort at Pacific Northwest National Laboratory (PNNL) to reduce unwanted effects of tags and tagging procedures on the survival and behavior of juvenile salmonids, by assessing and refining suturing techniques, suture materials, and tag burdens. The objective of this study was to compare the performance of the knotless (barbed) suture, using three different suture patterns (treatments: 6-point, Wide “N”, Wide “N” Knot), to the current method of suturing (MonocrylTM monofilament, discontinuous sutures with a 2Ś2Ś2Ś2 knot) used in monitoring and research programs with a novel antiseptic barrier on the wound (“Second Skin”).

    Woodley, Christa M.; Wagner, Katie A.; Bryson, Amanda J.

    2012-11-09T23:59:59.000Z

    489

    Turbine nozzle stage having thermocouple guide tube  

    SciTech Connect

    A guide tube is fixed adjacent opposite ends in outer and inner covers of a nozzle stage segment. The guide tube is serpentine in shape between the outer and inner covers and extends through a nozzle vane. An insert is disposed in the nozzle vane and has apertures to accommodate serpentine portions of the guide tube. Cooling steam is also supplied through chambers of the insert on opposite sides of a central insert chamber containing the guide tube. The opposite ends of the guide tube are fixed to sleeves, in turn fixed to the outer and inner covers.

    Schotsch, Margaret Jones (Greer, SC); Kirkpatrick, Francis Lawrence (late of Galway, NY); Lapine, Eric Michael (Northwood, NH)

    2002-01-01T23:59:59.000Z

    490

    HQ Leave Guide | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    HQ Leave Guide HQ Leave Guide HQ Leave Guide The purpose of this guide is to provide you, as a Headquarters employee, advice and guidance concerning issues related to hours of duty, time & attendance, and matters related to taking time off (e.g., annual and sick leave). However, this guide can not provide all encompassing guidance for all situations. In many cases, the answer is subject to office policy and/or supervisory judgment. For these reasons, any questions about how matters in this guide apply to you should first be discussed with your supervisor. HQ Leave Guide Responsible Contacts Myron Alston Human Resources Specialist (Labor & Employee Relations) E-mail myron.alston@hq.doe.gov Phone 202-586-8734 More Documents & Publications DOE Handbook on Leave and Absence

    491

    Advanced Energy Retrofit Guides | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Retrofit Guides Retrofit Guides Advanced Energy Retrofit Guides Photo of the cover of the Advanced Energy Retrofit Guide for Healthcare Facilities. The Advanced Energy Retrofit Guides (AERGs) were created to help decision makers plan, design, and implement energy improvement projects in their facilities. With energy managers in mind, they present practical guidance for kick-starting the process and maintaining momentum throughout the project life cycle. These guides are primarily reference documents, allowing energy managers to consult the particular sections that address the most pertinent topics.. Useful resources are also cited throughout the guides for further information. Each AERG is tailored specifically to the needs of a specific building type, with an emphasis on the most effective

    492

    Solar Ready Buildings Planning Guide  

    NLE Websites -- All DOE Office Websites (Extended Search)

    78 78 December 2009 Solar Ready Buildings Planning Guide L. Lisell, T. Tetreault, and A. Watson National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Operated by the Alliance for Sustainable Energy, LLC Contract No. DE-AC36-08-GO28308 Technical Report NREL/TP-7A2-46078 December 2009 Solar Ready Buildings Planning Guide L. Lisell, T. Tetreault, and A. Watson Prepared under Task No. PVC9.92DA NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any

    493

    Solar Ready Buildings Planning Guide  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    6078 6078 December 2009 Solar Ready Buildings Planning Guide L. Lisell, T. Tetreault, and A. Watson National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Operated by the Alliance for Sustainable Energy, LLC Contract No. DE-AC36-08-GO28308 Technical Report NREL/TP-7A2-46078 December 2009 Solar Ready Buildings Planning Guide L. Lisell, T. Tetreault, and A. Watson Prepared under Task No. PVC9.92DA NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any

    494

    Guide to Preparing SAND Reports  

    E-Print Network (OSTI)

    The Guide to Preparing SAND Reports contains guidelines for producing SAND Reports and other information releases. Its guidelines reflect DOE regulations and Sandia policy. The Guide includes in Section 1, policies for protecting and reproducing official information at Sandia, SAND number information, and Review & Approval procedures; in Section 2, basic writing instructions, which are illustrated in an annotated sample report; in Section 3, an explanation of the format, layout, and graphics of SAND Reports and a table that details the markings and legends needed for report covers and title pages; in Section 4, the procedures for reproducing and distributing SAND Reports; and in Section 5, information on presentations and conference papers, journal articles, book chapters, and brochures. The appendixes contain sections on Sandia's preferred style, usage, and grammar; equations; report references; and trademarks and copyrights. 4 May 1998 Intentionally Left Blank May 1998 5 Conten...

    Tamara Locke Editor; Tamara K. Locke

    1998-01-01T23:59:59.000Z

    495

    Probing new physics in diphoton production with proton tagging at the Large Hadron Collider  

    E-Print Network (OSTI)

    The sensitivities to anomalous quartic photon couplings at the Large Hadron Collider are estimated using diphoton production via photon fusion. The tagging of the protons proves to be a very powerful tool to suppress the background and unprecedented sensitivities down to $6 \\cdot 10^{-15}$\\gev$^{-4}$ are obtained, providing a new window on extra dimensions and strongly-interacting composite states in the multi-TeV range. Generic contributions to quartic photon couplings from charged and neutral particles with arbitrary spin are also presented.

    S. Fichet; G. von Gersdorff; O. Kepka; B. Lenzi; C. Royon; M. Saimpert

    2013-12-18T23:59:59.000Z

    496

    An efficient CMOS rectifier with low-voltage operation for RFID tags  

    Science Conference Proceedings (OSTI)

    A high-efficiency CMOS rectifier for radio-frequency identification (RFID) applications is presented. Using an on-chip generated clock signal, a new switching scheme is proposed to enhance the power efficiency of the conventional 4 transistor (4T)-cell ... Keywords: frequency 950 MHz, efficient CMOS rectifier, low-voltage operation, RFID tags, radio-frequency identification applications, on-chip generated clock signal, power efficiency, conventional 4 transistor-cell rectifier, charge-transfer transistors, small leakage current, external gate-boosting technique, nominal standard threshold voltage, MOS transistors, CMOS technology, power conversion efficiency

    P. Kamalinejad; S. Mirabbasi; V. C. M. Leung

    2011-07-01T23:59:59.000Z

    497

    High-spin excitations in {sup 158,159,160}Hf from recoil-decay tagging  

    SciTech Connect

    The 270-MeV {sup 58}Ni+{sup A}Pd reaction was used for the first recoil-decay tagging measurement with Gammasphere coupled to the Fragment Mass Analyzer at Argonne National Laboratory. Level structures of {sup 158}Hf and {sup 159}Hf are identified for the first time, and that of {sup 160}Hf is extended. The systematical behavior of the energy levels in neighboring isotones and isotopes, as well as the aligned angular momenta as a function of rotational frequency, are examined. (c) 2000 The American Physical Society.

    Ding, K. Y. [Department of Physics and Astronomy, Rutgers University, New Brunswick, New Jersey 08903 (United States); Cizewski, J. A. [Department of Physics and Astronomy, Rutgers University, New Brunswick, New Jersey 08903 (United States); Seweryniak, D. [Argonne National Laboratory, Argonne, Illinois 60439 (United States); Amro, H. [Argonne National Laboratory, Argonne, Illinois 60439 (United States); Carpenter, M. P. [Argonne National Laboratory, Argonne, Illinois 60439 (United States); Davids, C. N. [Argonne National Laboratory, Argonne, Illinois 60439 (United States); Fotiades, N. [Department of Physics and Astronomy, Rutgers University, New Brunswick, New Jersey 08903 (United States); Janssens, R. V. F. [Argonne National Laboratory, Argonne, Illinois 60439 (United States); Lauritsen, T. [Argonne National Laboratory, Argonne, Illinois 60439 (United States); Lister, C. J. [Argonne National Laboratory, Argonne, Illinois 60439 (United States)] (and others)

    2000-09-01T23:59:59.000Z

    498

    New Seals - Vulnerability Assessment Team - Nuclear Engineering Division  

    NLE Websites -- All DOE Office Websites (Extended Search)

    More Information More Information VAT Projects Introducing the VAT Adversarial Vulnerability Assessments Safety Tags & Product Counterfeiting Election Security Spoofing GPS Defeating Existing Tamper-Indicating Seals Specialty Field Tools & Sampling Tools Insider Threat Mitigation Drug Testing Security Microprocessor Prototypes The Journal of Physical Security Vulnerability Assessments Vulnerability Assessments Insanely Fast ”Processor Shop Insanely Fast ”Processor Shop Seals About Seals Applications of Seals Common Myths about Tamper Indicating Seals Definitions Findings and Lessons Learned New Seals Types of Seals Seals References Selected VAT Papers Selected VAT Papers Selected Invited Talks Self-Assessment Survey Security Maxims Devil's Dictionary of Security Terms Argonne's VAT (brochure)

    499

    About Seals - Vulnerability Assessment Team - Nuclear Engineering Division  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Seals Seals VAT Projects Introducing the VAT Adversarial Vulnerability Assessments Safety Tags & Product Counterfeiting Election Security Spoofing GPS Defeating Existing Tamper-Indicating Seals Specialty Field Tools & Sampling Tools Insider Threat Mitigation Drug Testing Security Microprocessor Prototypes The Journal of Physical Security Vulnerability Assessments Vulnerability Assessments Insanely Fast ”Processor Shop Insanely Fast ”Processor Shop Seals About Seals Applications of Seals Common Myths about Tamper Indicating Seals Definitions Findings and Lessons Learned New Seals Types of Seals Seals References Selected VAT Papers Selected VAT Papers Selected Invited Talks Self-Assessment Survey Security Maxims Devil's Dictionary of Security Terms Argonne's VAT (brochure)

    500

    Findings and Lessons, Seals - Vulnerability Assessment Team - Nuclear  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Findings and Lessons Learned Findings and Lessons Learned VAT Projects Introducing the VAT Adversarial Vulnerability Assessments Safety Tags & Product Counterfeiting Election Security Spoofing GPS Defeating Existing Tamper-Indicating Seals Specialty Field Tools & Sampling Tools Insider Threat Mitigation Drug Testing Security Microprocessor Prototypes The Journal of Physical Security Vulnerability Assessments Vulnerability Assessments Insanely Fast ”Processor Shop Insanely Fast ”Processor Shop Seals About Seals Applications of Seals Common Myths about Tamper Indicating Seals Definitions Findings and Lessons Learned New Seals Types of Seals Seals References Selected VAT Papers Selected VAT Papers Selected Invited Talks Self-Assessment Survey Security Maxims Devil's Dictionary of Security Terms