National Library of Energy BETA

Sample records for arra spreadsheet reflection

  1. GTP ARRA Spreadsheet | Open Energy Information

    Open Energy Info (EERE)

    and Elemental Analysis At Colrado Area (DOE GTP) Compound and Elemental Analysis At Fish Lake Valley Area (DOE GTP) Compound and Elemental Analysis At Flint Geothermal Area...

  2. Crump's Hot Springs Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    Survey GTP ARRA Spreadsheet Ground Magnetics At Crump's Hot Springs Area (DOE GTP) Ground Magnetics GTP ARRA Spreadsheet Reflection Survey At Crump's Hot Springs Area (DOE...

  3. Building America Analysis Spreadsheets

    Broader source: Energy.gov [DOE]

    The Building America Analysis Spreadsheets are companions to the House Simulation Protocols, and can assist with many of the calculations and look-up tables found in the report. The spreadsheets...

  4. Category:Geothermal ARRA Funded Projects Properties | Open Energy...

    Open Energy Info (EERE)

    Geothermal ARRA Funded Projects Properties Jump to: navigation, search Properties used in the Geothermal ARRA Funded template. Pages in category "Geothermal ARRA Funded Projects...

  5. Hanford ARRA News - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recovery Act of 2009 Hanford ARRA News Recovery Act of 2009 Hanford ARRA News Hanford ARRA News Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size 2010 July 26, 2010 K East Reactor Stack Taken Down (PDF) DOE and contractor CH2M HILL Plateau Remediation Company used Recovery Act funding to take down the stack of the K East Reactor using explosives on July 23, 2010. July 21, 2010 Helicopter Removes Aging Truck From Steep Rattlesnake Ravine (PDF) A Sikorsky S-64

  6. IRP Budget Spreadsheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IRP Budget Spreadsheet IRP Budget Spreadsheet Blank budget spreadsheet for the Intergrated Research Project. IRPBudgetspreadsheet021711.xls (61.5 KB) More Documents & ...

  7. Project Cost Profile Spreadsheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Cost Profile Spreadsheet Project Cost Profile Spreadsheet File Project Cost Profile Spreadsheet.xlsx More Documents & Publications Statement of Work (SOW) Template ...

  8. Managing Financing Programs- Spreadsheet Models

    Broader source: Energy.gov [DOE]

    This webinar, held on Jan. 24, 2011, provides a tutorial for managing financing programs through excel spreadsheets.

  9. ARRA Projects Chart | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Projects Chart ARRA Projects Chart A chart stating the grantee, DOE grant amount,non federal cost share,project lead organization,description,and partners. ARRA Projects Chart (69.68 KB) More Documents & Publications ARRA Project Info Combined 0112110.xls Missouri Recovery Act State Memo The Promise and Challenge of Algae as Renewable Sources of Biofuels

  10. LADTAPXL Aqueous Dose Spreadsheet

    Energy Science and Technology Software Center (OSTI)

    1999-08-10

    LADTAPXL is an EXCEL spreadsheet model of the NRC computer code LADTAP. LADTAPXL calculates maximally exposed individual and population doses from chronic liquid releases. Environmental pathways include external exposure resulting from recreational activities on the Savannah River and ingestion of water, fish, and invertebrates of Savannah River origin.

  11. Hot Oiling Spreadsheet

    Energy Science and Technology Software Center (OSTI)

    1993-10-22

    One of the most common oil-field treatments is hot oiling to remove paraffin from wells. Even though the practice is common, the thermal effectiveness of the process is not commonly understood. In order for producers to easily understand the thermodynamics of hot oiling, a simple tool is needed for estimating downhole temperatures. Such a tool has been developed that can be distributed as a compiled spreadsheet.

  12. ASHRAE Standard 152 Spreadsheet

    Broader source: Energy.gov [DOE]

    ASHRAE Standard 152 quantifies the delivery efficiency of duct systems, based on factors including location, leakage, and insulation of ductwork. This spreadsheet tool developed by Lawrence Berkeley National Laboratory (LBNL) and modified by the National Renewable Energy Laboratory, assists with the calculation of seasonal distribution system efficiency, This calculation is required by the House Simulation Protocols when the simulation tool being used does not permit detailed duct modeling.

  13. Property:GeothermalArraAwardeeCostShare | Open Energy Information

    Open Energy Info (EERE)

    GeothermalArraAwardeeCostShare Property Type Number Description Geothermal ARRA Awardee Cost Share Pages using the property "GeothermalArraAwardeeCostShare" Showing 25 pages using...

  14. Dose Calculation Spreadsheet

    Energy Science and Technology Software Center (OSTI)

    1997-06-10

    VENTSAR XL is an EXCEL Spreadsheet that can be used to calculate downwind doses as a result of a hypothetical atmospheric release. Both building effects and plume rise may be considered. VENTSAR XL will run using any version of Microsoft EXCEL version 4.0 or later. Macros (the programming language of EXCEL) was used to automate the calculations. The user enters a minimal amount of input and the code calculates the resulting concentrations and doses atmore » various downwind distances as specified by the user.« less

  15. Value of Information spreadsheet

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Trainor-Guitton, Whitney

    2014-05-12

    This spreadsheet represents the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value of information of MT for geothermal exploration. Information posteriors describe how well MT was able to locate the "throat" of clay caps, which are indicative of hidden geothermal resources. This data is full explained in the peer-reviewed publication: Trainor-Guitton, W., Hoversten, G. M., Ramirez, A., Roberts, J., Jlusson, E., Key, K., Mellors, R. (Sept-Oct. 2014) The value of spatial information for determining well placement: a geothermal example, Geophysics.

  16. Value of Information spreadsheet

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Trainor-Guitton, Whitney

    2014-05-12

    This spreadsheet represents the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value of information of MT for geothermal exploration. Information posteriors describe how well MT was able to locate the "throat" of clay caps, which are indicative of hidden geothermal resources. This data is full explained in the peer-reviewed publication: Trainor-Guitton, W., Hoversten, G. M., Ramirez, A., Roberts, J., Júlíusson, E., Key, K., Mellors, R. (Sept-Oct. 2014) The value of spatial information for determining well placement: a geothermal example, Geophysics.

  17. Energy Advising Services in the Post-ARRA World | Department...

    Energy Savers [EERE]

    Advising Services in the Post-ARRA World Energy Advising Services in the Post-ARRA World Better Buildings Residential Network Workforce Business Partners Peer Exchange Call: ...

  18. Section 1512 Reporting Requirements under ARRA | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Requirements under ARRA More Documents & Publications Appendix B Section 1605 Buy American Provision under ARRA Intelligence Reform and Terrorism Prevention Act - December 17, 2004

  19. EAC Recommendations on Grid Modernization: ARRA Accomplishments...

    Energy Savers [EERE]

    This report, approved at the September 2015 EAC meeting, is a retrospective assessment of ... Act (ARRA) in encouraging the industry to take a substantial technical step forward. ...

  20. Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA); Quarter 1 2012 Composite Data Products - Deployment (Presentation)

    SciTech Connect (OSTI)

    Kurtz, J.; Wipke, K.; Sprik, S.; Ramsden, T.; Ainscough, C.

    2012-06-01

    This presentation is about the Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA). Quarter 1 2012 Composite Data Products - Deployment March 8, 2012.

  1. Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA); November 2011 Composite Data Products - Deployment (Presentation)

    SciTech Connect (OSTI)

    Kurtz, J.; Wipke, K.; Sprik, S.; Ramsden, T.; Ainscough, C.

    2012-06-01

    This presentation is about the Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA). November 2011 Composite Data Products - Deployment November 30, 2011.

  2. Section 1605 Buy American Provision under ARRA | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    605 Buy American Provision under ARRA Section 1605 Buy American Provision under ARRA Additional information on the Buy American Provision under ARRA. Section 1605 Buy American Provision under ARRA (9.71 KB) More Documents & Publications Nationwide Limited Public Interest Waiver for LED and HVAC Units Questions and Answers for the Smart Grid Investment Grant Program: Buy American Buy American Guidance Documents

  3. Excel spreadsheet discussed in Report Appendix

    Broader source: Energy.gov [DOE]

    The functional spreadsheet which accompanies the Accounting for Uncertainty in Lumen Measurements report.

  4. ARM - Field Campaign - ARRA AERI Comparison

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govCampaignsARRA AERI Comparison ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign : ARRA AERI Comparison 2011.01.07 - 2011.01.23 Lead Scientist : David Turner For data sets, see below. Abstract The ARM program, using stimulus funds from the ARRA, acquired a new AERI instrument for the SGP site. This new instrument was run side-by-side with the operational AERI at the SGP central facility to evaluate its

  5. Appendix A-1 Contract Performance Reports ARRA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A-1 Contract Performance Reports ARRA December 2011 CHPRC-2011-12, Rev. 0 Contract DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 Format 1 - Work Breakdown Structure Format 3 -...

  6. IRC Budget Proposal spreadsheet example | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IRC Budget Proposal spreadsheet example IRC Budget Proposal spreadsheet example An example budget proposal for NEUP Integrated Research Project. Example Budget spreadsheet ...

  7. ARRA521 Recovery Act - Project Daily Report

    Office of Environmental Management (EM)

    Energy ARRA Grid Modernization Investment Highlights - Fact Sheet ARRA Grid Modernization Investment Highlights - Fact Sheet The power grid of the future is a platform that delivers reliable, affordable, and clean electricity to American consumers where they want it, when they want it, and how they want it. To jump start the modernization of our nation's aging energy infrastructure, the American Recovery and Reinvestment Act of 2009 invested $4.5 billion in the electric sector - matched by

  8. 2009 ARRA Newsletters | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    09 ARRA Newsletters 2009 ARRA Newsletters American Recovery & Reinvestment Act Newsletter - Issue 8 (2.95 MB) American Recovery & Reinvestment Act Newsletter - Issue 7 (865.96 KB) American Recovery & Reinvestment Act Newsletter - Issue 6 (3.6 MB) American Recovery & Reinvestment Act Newsletter - Issue 5 (1.04 MB) American Recovery & Reinvestment Act Newsletter - Issue 4 (9.28 MB) American Recovery & Reinvestment Act Newsletter - Issue 3 (893.08 KB) American Recovery &

  9. 2010 ARRA Newsletters | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10 ARRA Newsletters 2010 ARRA Newsletters American Recovery & Reinvestment Act Newsletter - Issue 19 (6.83 MB) American Recovery & Reinvestment Act Newsletter - Issue 18 (6.2 MB) American Recovery & Reinvestment Act Newsletter - Issue 17 (7.14 MB) American Recovery & Reinvestment Act Newsletter - Issue 16 (7.14 MB) American Recovery & Reinvestment Act Newsletter - Issue 15 (7.41 MB) American Recovery & Reinvestment Act Newsletter - Issue 14 (7.49 MB) American Recovery

  10. 2011 ARRA Newsletters | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 ARRA Newsletters 2011 ARRA Newsletters American Recovery & Reinvestment Act Newsletter - Issue 29 (12.89 MB) American Recovery & Reinvestment Act Newsletter - Issue 28 (8.68 MB) American Recovery & Reinvestment Act Newsletter - Issue 27 (7.42 MB) American Recovery & Reinvestment Act Newsletter - Issue 26 (8.58 MB) American Recovery & Reinvestment Act Newsletter - Issue 25 (6.84 MB) American Recovery & Reinvestment Act Newsletter - Issue 24 (7.37 MB) American Recovery

  11. Energy Storage R&D and ARRA | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Storage R&D and ARRA Energy Storage R&D and ARRA 2010 DOE Vehicle ... More Documents & Publications Hybrid Electric Systems Overview of Battery R&D Activities Overview of ...

  12. Title XVII-Innovative Technology Loan Guarantee Program under ARRA |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy XVII-Innovative Technology Loan Guarantee Program under ARRA Title XVII-Innovative Technology Loan Guarantee Program under ARRA Additional information on Title XVII-Innovative Technology Loan Guarantee Program under ARRA. Title XVII-Innovative Technology Loan Guarantee Program under ARRA (8.48 KB) More Documents & Publications Z:\ENROLL\H1.ENR Statement Before the Senate Energy and Natural Resources Committee American Recovery and Reinvestment Act of 2009

  13. Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA): Quarter 4 2013 Composite Data Products

    SciTech Connect (OSTI)

    Kurtz, J.; Sprik, S.

    2014-06-01

    This report includes the composite data products (CDPs) for early fuel cell market deployments in quarter 4 of 2013. Results are presented for ARRA (projects funded by the American Recovery and Reinvestment Act of 2009 [ARRA]) and Combined (projects funded by DOE Interagency Agreements [IAA], Department of Defense Defense Logistics Agency [DLA], and ARRA).

  14. ARRA Project Info Combined 0112110.xls | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications ARRA Projects Chart Missouri Recovery Act State Memo Texas Hydrogen Highway - Fuel Cell Hybrid Bus and Fueling Infrastructure Technology Showcase...

  15. First ARRA-Funded Demolition at Y-12 Begins

    Broader source: Energy.gov [DOE]

    Y-12 began its first ARRA-funded demolition project, Building 9735. The facility was built in 1946 as an engineering laboratory.

  16. ARRA Home Improvement Funds Application for Canton, Michigan...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Home Improvement Funds Application for Canton, Michigan ARRA Home Improvement Funds Application for Canton, Michigan Federal Energy Regulatory Commission Loan Program Limited ...

  17. Energy Advising Services in the Post-ARRA World

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Workforce / Business Partners Peer Exchange Call: Energy Advising Services in the Post-ARRA World, Call Slides and Summary, June 27, 2013. This peer exchange call discussed energy advising services in the post­-ARRA world.

  18. January 2012 ARRA Energy Assurance Planning Bulletin Available

    Broader source: Energy.gov [DOE]

    The Department released the January 2012 issue of the ARRA Energy Assurance Planning Bulletin (EAPB). The ARRA EAPB is issued quarterly to provide information on energy assurance planning resources, upcoming events, training opportunities, and important grant deliverable dates. This is the ninth issue of the EAP Bulletin; previous issues are available for download.

  19. July 2012 ARRA Energy Assurance Planning Bulletin Available

    Broader source: Energy.gov [DOE]

    The Department released the July 2012 issue of the ARRA Energy Assurance Planning Bulletin (EAPB). The ARRA EAPB is issued quarterly to provide information on energy assurance planning resources, upcoming events, training opportunities, and important grant deliverable dates. This is the eleventh issue of the EAP Bulletin; previous issues are available for download.

  20. April 2012 ARRA Energy Assurance Planning Bulletin Available

    Broader source: Energy.gov [DOE]

    The Department released the April 2012 issue of the ARRA Energy Assurance Planning Bulletin (EAPB). The ARRA EAPB is issued quarterly to provide information on energy assurance planning resources, upcoming events, training opportunities, and important grant deliverable dates. This is the tenth issue of the EAP Bulletin; previous issues are available for download.

  1. Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA); Quarter 3 2012 Composite Data Products

    SciTech Connect (OSTI)

    Kurtz, J.; Wipke, K.; Sprik, S.; Ramsden, T.; Ainscough, C.; Saur, G.; Post, M.

    2013-01-01

    This report from the U.S. Department of Energy's National Renewable Energy Laboratory includes early fuel cell market composite data products for the third quarter of 2012 for American Recovery and Reinvestment Act (ARRA) and combined (IAA, DLA, ARRA) deployment projects.

  2. Managing Financing Programs-- Spreadsheet Models (Text Version)

    Broader source: Energy.gov [DOE]

    Chris: - financial market development team. I'm really glad that all of you have been able to take time out of your busy days to come and share some time with us talking about using spreadsheet...

  3. Consortium Participant List - Spreadsheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Consortium Participant List - Spreadsheet Consortium Participant List - Spreadsheet Membership in the Consortium is open to municipalities, utilities, and energy efficiency organizations, with participation at various levels from other interested parties. consortium-participant-list.xlsx (29.14 KB) More Documents & Publications Fuel Cell Power Plants Biofuel Case Study - Tulare, CA Microsoft Word - DE-FOA-0000013 Amendment 000003.doc Funding Opportunity Announcement: Recovery Act … Energy

  4. Report on all ARRA Funded Technical Work

    SciTech Connect (OSTI)

    None, None

    2013-10-05

    The main focus of this American Recovery and Reinvestment Act of 2009 (ARRA) funded project was to design an energy efficient carbon capture and storage (CCS) process using the Recipients membrane system for H{sub 2} separation and CO{sub 2} capture. In the ARRA-funded project, the Recipient accelerated development and scale-up of ongoing hydrogen membrane technology research and development (R&D). Specifically, this project focused on accelerating the current R&D work scope of the base program-funded project, involving lab scale tests, detail design of a 250 lb/day H{sub 2} process development unit (PDU), and scale-up of membrane tube and coating manufacturing. This project scope included the site selection and a Front End Engineering Design (FEED) study of a nominally 4 to 10 ton-per-day (TPD) Pre-Commercial Module (PCM) hydrogen separation membrane system. Process models and techno-economic analysis were updated to include studies on integration of this technology into an Integrated Gasification Combined Cycle (IGCC) power generation system with CCS.

  5. Data Analysis for ARRA Early Fuel Cell Market Demonstrations (Presentation)

    SciTech Connect (OSTI)

    Kurtz, J.; Wipke, K.; Sprik, S.; Ramsden, T.

    2010-05-01

    Presentation about ARRA Early Fuel Cell Market Demonstrations, including an overview of the ARRE Fuel Cell Project, the National Renewable Energy Laboratory's data analysis objectives, deployment composite data products, and planned analyses.

  6. The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (EAP) Bulletin, April 1 2010, Volume 1 No. 2 | Department of Energy April 1 2010, Volume 1 No. 2 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin, April 1 2010, Volume 1 No. 2 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin provides information on energy assurance planning resources, upcoming events, training opportunities, and important grant deliverable dates. VOLUME 1, NUMBER 2. For more information about

  7. The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (EAP) Bulletin, April 2, 2012, Volume 3 No. 2 | Department of Energy April 2, 2012, Volume 3 No. 2 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin, April 2, 2012, Volume 3 No. 2 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin provides information on energy assurance planning resources, upcoming events, training opportunities, and important grant deliverable dates. VOLUME 3, NUMBER 2. For more information

  8. The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (EAP) Bulletin, January 3 2012, Volume 3 No. 1 | Department of Energy 3 2012, Volume 3 No. 1 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin, January 3 2012, Volume 3 No. 1 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin provides information on energy assurance planning resources, upcoming events, training opportunities, and important grant deliverable dates. VOLUME 3, NUMBER 1. For more information about

  9. The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (EAP) Bulletin, January 4, 2010, Volume 1 No. 1 | Department of Energy 4, 2010, Volume 1 No. 1 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin, January 4, 2010, Volume 1 No. 1 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin provides information on energy assurance planning resources, upcoming events, training opportunities, and important grant deliverable dates. VOLUME 1, NUMBER 1. For more information

  10. The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (EAP) Bulletin, July 1 2010, Volume 1 No. 3 | Department of Energy 1 2010, Volume 1 No. 3 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin, July 1 2010, Volume 1 No. 3 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin provides information on energy assurance planning resources, upcoming events, training opportunities, and important grant deliverable dates. VOLUME 1, NUMBER 3. For more information about how OE

  11. The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (EAP) Bulletin, July 9, 2012, Volume 3 No. 3 | Department of Energy 9, 2012, Volume 3 No. 3 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin, July 9, 2012, Volume 3 No. 3 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin provides information on energy assurance planning resources, upcoming events, training opportunities, and important grant deliverable dates. VOLUME 3, NUMBER 3. For more information about how

  12. The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (EAP) Bulletin, October 1 2010, Volume 1, No. 4 | Department of Energy October 1 2010, Volume 1, No. 4 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin, October 1 2010, Volume 1, No. 4 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin provides information on energy assurance planning resources, upcoming events, training opportunities, and important grant deliverable dates. VOLUME 1, NUMBER 4. For more

  13. The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (EAP) Bulletin, October 1, 2012, Volume 3 No. 4 | Department of Energy October 1, 2012, Volume 3 No. 4 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin, October 1, 2012, Volume 3 No. 4 The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin provides information on energy assurance planning resources, upcoming events, training opportunities, and important grant deliverable dates. VOLUME 3, NUMBER 4. For more

  14. SEP/ARRA Evaluation Webinar | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ARRA Evaluation Webinar SEP/ARRA Evaluation Webinar This PowerPoint template for EERE Corporate provides an introduction-style slide background and a follow-on slide background for corporate presentations. evaluation_webinar_slides_june16_2010.pdf (246.83 KB) More Documents & Publications Guidance on Basic Best Practices in Management of Energy Performance Buildings DOE Recovery Act Reporting Requirements for the State Energy Program Developing an Evaluation Measurement, and Verification

  15. Recovery Act Monthly Reporting Spreadsheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Recovery Act Monthly Reporting Spreadsheet Recovery Act Monthly Reporting Spreadsheet Monthly Update Report Data Recovery Act Monthly Reporting Spreadsheet (84.9 KB) More Documents & Publications Audit Letter Report: OAS-RA-L-10-01 Audit Report: OAS-RA-L-12-02 Audit Special Report: OAS-RA-10-0

  16. FY 2014 Funding History Detail Spreadsheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Budget » FY 2014 Budget Justification » FY 2014 Funding History Detail Spreadsheet FY 2014 Funding History Detail Spreadsheet FY 2014 Funding History Detail Spreadsheet (3.5 MB) (3.39 MB) More Documents & Publications CONSUMER CLOTHES WASHERS (APPENDIX J2) Direct Heating Equipment- v2.0 consumer Clothes Washers (Appendix J2)

  17. DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM (SEP) PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY ...

  18. Energy Storage Systems 2012 Peer Review Presentations- Poster Session 2 (Day 2): ARRA Projects

    Broader source: Energy.gov [DOE]

    Day 2 poster session presentations (ARRA projects) for OE's Energy Storage Systems Program (ESS) 2012 Peer Review

  19. Guidebook for ARRA Smart Grid Program Metrics and Benefits | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Guidebook for ARRA Smart Grid Program Metrics and Benefits Guidebook for ARRA Smart Grid Program Metrics and Benefits The Guidebook for American Recovery and Reinvestment Act (ARRA) Smart Grid Program Metrics and Benefits describes the type of information to be collected from each of the Project Teams and how it will be used by the Department of Energy to communicate overall conclusions to the public. Guidebook for ARRA Smart Grid Program Metrics and Benefits (975.03 KB) More

  20. EM ARRA Best Practices and Lessons Learned Workshop: Oak Ridge

    Office of Environmental Management (EM)

    Learned Oak Ridge Presenter: Sue Cange EM ARRA BEST PRACTICES and LESSONS LEARNED WORKSHOP Waste Management Symposium Phoenix, AZ www.em.doe.gov 1 March 1, 2012 Oak Ridge Overview of Best Practice or Opportunity pp y Working closely together, the Y-12 Site M&O Contractor, the ORO Reservation disposal cell, DOE-EM, and the Regulators crafted a technically defensible, yet very cost effective characterization program in an effort to rapidly D&D two buildings that were part of the Y-12 ARRA

  1. Idaho Cleanup Project grows its workforce to complete ARRA work

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Idaho Cleanup Project grows its workforce to complete ARRA work CWI President and CEO John Fulton greets newly hired ICP employees at a June orientation session in Idaho Falls. Over a hundred new faces have already joined the Idaho Cleanup Project (ICP) workforce, both in offices and at work sites across DOE's Idaho Site. The ICP is ramping up its workforce to complete new work scope assigned to the ICP under the American Recovery and Reinvestment Act (ARRA). As of June 27, 143 new workers have

  2. Argonne Director Eric Isaacs talks about ARRA funding at Argonne

    ScienceCinema (OSTI)

    Isaacs, Eric

    2013-04-19

    Argonne is set to receive over $150 million in stimulus funds. Director Eric Isaacs describes how these funds will be put to good use?hiring employees and contractors, cleaning up the nuclear footprint, and investing in technologies for America's future. More info on Argonne and ARRA here: http://www.anl.gov/recovery/index.html

  3. Open Source Impacts of REDD Incentives Spreadsheet (OSIRIS) ...

    Open Energy Info (EERE)

    platform is recognizable to - and can be downloaded by - almost everyone. It's a Microsoft Excel spreadsheet. A user can define any of the values used to calculate REDD...

  4. Cost of Renewable Energy Spreadsheet Tool (CREST) | Open Energy...

    Open Energy Info (EERE)

    cleanenergysolutions.orgcontentcost-renewable-energy-spreadsheet-too Language: English Policies: Regulations Regulations: Feed-in Tariffs Assess projects, design cost-based...

  5. POLICY GUIDANCE MEMORANDUM #02 Using Schedule A Hiring Authority for ARRA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Positions (Expired) | Department of Energy 02 Using Schedule A Hiring Authority for ARRA Positions (Expired) POLICY GUIDANCE MEMORANDUM #02 Using Schedule A Hiring Authority for ARRA Positions (Expired) THIS GUIDANCE HAS EXPIRED OPM is authorizing the use of excepted service appointments under Title 5 CFR 213.31 02 (i) (3) to address the needs of agencies to hire additional staff in support of the American Recovery and Reinvestment Act of 2009 (ARRA) The Schedule A authority under 5 CFR 21

  6. DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED ENERGY EFFICIENCY...

    Energy Savers [EERE]

    BLOCK GRANT (EECBG) PROGRAM PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANT (EECBG) ...

  7. Track 8: Safety of Work Created Under the American Recovery and Reinvestment Act (ARRA)

    Broader source: Energy.gov [DOE]

    ISM Workshop Presentations Knoxville Convention Center, Knoxville, TN August 2009 Track 8: Safety of Work Created Under the American Recovery and Reinvestment Act (ARRA)

  8. Progress of DOE Materials, Manufacturing Process R&D, and ARRA...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Progress of DOE Materials, Manufacturing Process R&D, and ARRA Battery Manufacturing Grants 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit ...

  9. Davis-Bacon Act Wage Rates for ARRA-Funded State Energy Program...

    Broader source: Energy.gov (indexed) [DOE]

    DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM (SEP) PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANTS PROGRAM ...

  10. Progress of DOE Materials, Manufacturing Process R&D, and ARRA...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications Progress of DOE Materials, Manufacturing Process R&D, and ARRA Battery Manufacturing Grants Vehicle Technologies Office: 2010 Energy Storage R&D ...

  11. ORISE: ARRA-funded work creates opportunities for Tennessee-based...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    buildings and in the process, has expanded his knowledge of the tools and techniques used when sampling structural components. How ARRA-work helped Kevin "With this ORNL...

  12. AVTA: ARRA EV Project Charging Infrastructure Data Summary Reports |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Charging Infrastructure Data Summary Reports AVTA: ARRA EV Project Charging Infrastructure Data Summary Reports The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and

  13. AVTA: ARRA EV Project Residential Charging Infrastructure Maps | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Residential Charging Infrastructure Maps AVTA: ARRA EV Project Residential Charging Infrastructure Maps The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported

  14. ORISE: Supporting ARRA funded cleanup activities in Oak Ridge, Tenn.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ORISE supporting Oak Ridge reservation cleanup activities through recovery funding ORISE technician performs an environmental scan Disposing of old and contaminated buildings, and remediating soil and groundwater across the Oak Ridge Reservation has long been a priority for the U.S. Department of Energy (DOE)-Oak Ridge Office (ORO). Though much of the work wasn't expected to begin for another three to four years, the acquisition of $755 million in American Recovery and Reinvestment Act (ARRA)

  15. Examples of Benefits from the NEPA process for ARRA funded activities

    Office of Energy Efficiency and Renewable Energy (EERE)

    Efforts to implement the American Recovery and Reinvestment Act of 2009 (ARRA) include ensuring, and reporting on, timely NEPA reviews prepared in support of projects and activities funded under major provisions of ARRA. In addition to reporting on the status of the NEPA environmental reviews, agencies also report on the benefits of NEPA.

  16. TOTAL ARRA Homes Weatherized thru Q2 2010 8.19.10.xls | Department of

    Broader source: Energy.gov (indexed) [DOE]

    Energy TOTAL ARRA Homes Weatherized thru Q2 2010 8.19.10.xls (14.26 KB) More Documents & Publications U.S. Department of Energy Weatherization Assistance Program Homes Weatherized By State through 06/30/2010 (Calendar Year) Homes Weatherized by State March 2010 ARRA Homes Weatherized by Grantee

  17. TOTAL_ARRA_Homes_Weatherized_thru_Q3_2010_11_9_10.pdf | Department of

    Broader source: Energy.gov (indexed) [DOE]

    Energy (73.65 KB) More Documents & Publications TOTAL_ARRA_Homes_Weatherized_thru_Q4_2010_3.7.11.pdf ARRA_Homes_Weatherized_by_State_for_February_4.14.11.pdf Homes_Weatherized_State_July_10.15.10.pdf

  18. 2009-04 "Priorities for ARRA Stimulus Funding for Environmental Clean-up at

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LANL" | Department of Energy 4 "Priorities for ARRA Stimulus Funding for Environmental Clean-up at LANL" 2009-04 "Priorities for ARRA Stimulus Funding for Environmental Clean-up at LANL" The intent of this recommendation is to encourage LASO and the DOE Office of Environmental Management to shoe immediate and beneficial acceleration of the clean-up of legacy waste at LANL and to encourage additional ARRA funding be provided for the use at LANL. Further, the intent of

  19. ARRA_Homes_Weatherized_by_State_for_January_4.14.11.pdf | Department of

    Broader source: Energy.gov (indexed) [DOE]

    Energy 98 KB) More Documents & Publications ARRA_Homes_Weatherized_by_State_for_February_4.14.11.pdf Homes_Weatherized_by_State_for_November_1.18.10.pdf Homes Weatherized by State April 2010

  20. ARRA Material Handling Equipment Composite Data Products: Data Through Quarter 4 of 2013

    SciTech Connect (OSTI)

    Kurtz, J.; Sprik, S.; Peters, M.

    2014-06-01

    This report includes 47 composite data products (CDPs) produced for American Recovery and Reinvestment Act (ARRA) fuel cell material handling equipment, with data through the fourth quarter of 2013.

  1. ARRA Material Handling Equipment Composite Data Products: Data Through Quarter 4 of 2012

    SciTech Connect (OSTI)

    Kurtz, J.; Sprik, S.; Ainscough, C.; Saur, G.; Post, M.; Peters, M.; Ramsden, T.

    2013-05-01

    This presentation from the U.S. Department of Energy's National Renewable Energy Laboratory includes American Recovery and Reinvestment Act (ARRA) fuel cell material handling equipment composite data products for data through the fourth quarter of 2012.

  2. MEDIA ADVISORY: DOE Open House to Focus on Programmatic Successes Achieved Under ARRA Funding

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy’s Idaho Operations Office will hold an open house on Monday, Nov. 14 to highlight the cleanup and energy accomplishments made with American Recovery and Reinvestment Act (ARRA) funding.

  3. DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM...

    Broader source: Energy.gov (indexed) [DOE]

    STATE ENERGY PROGRAM PROGRAM NOTICE 10-010 EFFECTIVE DATE: May 6, 2010 SUBJECT: DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM PROJECTS INVOLVING RESIDENTIAL ...

  4. ARRA Material Handling Equipment Composite Data Products: Data through Quarter 2 of 2013

    SciTech Connect (OSTI)

    Kurtz, J.; Sprik, S.; Ainscough, C.; Saur, G.; Post, M.; Peters, M.

    2013-11-01

    This report includes 47 composite data products (CDPs) produced for American Recovery and Reinvestment Act (ARRA) fuel cell material handling equipment, with data through the second quarter of 2013.

  5. WPN 10-13: ARRA Reporting Requirements: OMB Quarterly and DOE Monthly

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reporting Requirements Under the American Recovery and Reinvestment Act of 2009 for the Weatherization Assistance Program | Department of Energy : ARRA Reporting Requirements: OMB Quarterly and DOE Monthly Reporting Requirements Under the American Recovery and Reinvestment Act of 2009 for the Weatherization Assistance Program WPN 10-13: ARRA Reporting Requirements: OMB Quarterly and DOE Monthly Reporting Requirements Under the American Recovery and Reinvestment Act of 2009 for the

  6. WPN 10-13a: ARRA Reporting Requirements: OMB Quarterly and DOE Monthly

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reporting Requirements under the American Recovery and Reinvestment Act of 2009 for the Weatherization Assistance Program | Department of Energy a: ARRA Reporting Requirements: OMB Quarterly and DOE Monthly Reporting Requirements under the American Recovery and Reinvestment Act of 2009 for the Weatherization Assistance Program WPN 10-13a: ARRA Reporting Requirements: OMB Quarterly and DOE Monthly Reporting Requirements under the American Recovery and Reinvestment Act of 2009 for the

  7. Medium Duty ARRA Data Reporting and Analysis (Presentation)

    SciTech Connect (OSTI)

    Walkowicz, K.

    2014-06-01

    This project compiles medium-duty (MD) aggregated deployment data and provides the compiled detailed analyses to industry. The U.S. Department of Energy's (DOE's) American Recovery and Reinvestment Act (ARRA) deployment and demonstration projects are helping to commercialize technologies for all-electric vehicles, electrified accessories, and electric charging infrastructure. Over 3.2 million miles of in-service all-electric MD truck data from 560 different vehicles have been collected since 2011, and usage data from over 1,000 truck electrification sites have been collected since 2013. Through the DOE's Vehicle Technologies Office, NREL is working to analyze real-time data from these deployment and demonstration projects to quantify the benefits: results and summary statistics are made available through the NREL website as quarterly and annual reports; 23 aggregated reports have been published on the performance and operation of these vehicles; and detailed data are being extracted to help further understand battery use and performance.

  8. Environmental Emissions Nonenergy Benefits Working Paper: ARRA Period

    SciTech Connect (OSTI)

    Carroll, David; Bausch, Daniel

    2015-03-01

    Weatherization reduces energy usage by low-income households, and thereby reduces the environmental impacts of the production and consumption of energy and reduces the social costs associated with those environmental impacts. The nonenergy benefits study conducted as part of the American Recovery and Reinvestment Act of 2009 (ARRA) Weatherization Assistance Program (WAP) evaluation focused on measuring the emissions reductions resulting from WAP program energy usage reductions and estimating the societal value of those emission reductions. While there are other environmental impacts associated with the WAP program, this study focused on emissions impacts because the 2010 National Research Council (NRC) report Hidden Costs of Energy: The Unpriced Consequences of Energy Production and Use recommended that Congress focus on emissions costs because they have the highest documented social impact costs

  9. Questions below are regarding the spreadsheet EERE-2014-BT-STD-0031-002 unless o

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    below are regarding the spreadsheet EERE-2014-BT-STD-0031-002 unless otherwise noted. 1) The 2011 LCC spreadsheet predicted lower LCC savings, especially for replacements in the south region and for the highest efficiency (98%) condensing furnace cases, compared to the 2014 LCC spreadsheet even though the 2011 LCC spreadsheet did not include the potential of fuel switching. a) What are the major reasons for the significant changes in LCC savings? b) Why do consumer impacts for replacements in

  10. When Spreadsheets Become Software - Quality Control Challenges and Approaches - 13360

    SciTech Connect (OSTI)

    Fountain, Stefanie A.; Chen, Emmie G.; Beech, John F.; Wyatt, Elizabeth E.; Quinn, Tanya B.; Seifert, Robert W.

    2013-07-01

    As part of a preliminary waste acceptance criteria (PWAC) development, several commercial models were employed, including the Hydrologic Evaluation of Landfill Performance model (HELP) [1], the Disposal Unit Source Term - Multiple Species model (DUSTMS) [2], and the Analytical Transient One, Two, and Three-Dimensional model (AT123D) [3]. The results of these models were post-processed in MS Excel spreadsheets to convert the model results to alternate units, compare the groundwater concentrations to the groundwater concentration thresholds, and then to adjust the waste contaminant masses (based on average concentration over the waste volume) as needed in an attempt to achieve groundwater concentrations at the limiting point of assessment that would meet the compliance concentrations while maximizing the potential use of the landfill (i.e., maximizing the volume of projected waste being generated that could be placed in the landfill). During the course of the PWAC calculation development, one of the Microsoft (MS) Excel spreadsheets used to post-process the results of the commercial model packages grew to include more than 575,000 formulas across 18 worksheets. This spreadsheet was used to assess six base scenarios as well as nine uncertainty/sensitivity scenarios. The complexity of the spreadsheet resulted in the need for a rigorous quality control (QC) procedure to verify data entry and confirm the accuracy of formulas. (authors)

  11. The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin, January 3 2011, Volume 2 No. 1

    Broader source: Energy.gov [DOE]

    The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin provides information on energy assurance planning resources, upcoming events, training opportunities, and...

  12. The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin, July 1 2011, Volume 2 No. 3

    Broader source: Energy.gov [DOE]

    The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin provides information on energy assurance planning resources, upcoming events, training opportunities, and...

  13. The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin, April 1 2011, Volume 2 No. 2

    Broader source: Energy.gov [DOE]

    The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin provides information on energy assurance planning resources, upcoming events, training opportunities, and...

  14. The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin, October 3 2011, Volume 2 No. 4

    Broader source: Energy.gov [DOE]

    The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning (EAP) Bulletin provides information on energy assurance planning resources, upcoming events, training opportunities, and...

  15. Davis-Bacon Act Wage Rates for ARRA-Funded Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Each state's spreadsheet is organized by county and lists the relevant work classifications for a jurisdiction; for example Laborer, Insulator, Carpenter, Electrician, Plumber, ...

  16. NATIONAL EVALUATION OF THE WEATHERIZATION ASSISTANCE PROGRAM DURING THE ARRA PERIOD: PROGRAM YEARS 2009-2011

    SciTech Connect (OSTI)

    Tonn, Bruce Edward; Rose, Erin M; Schmoyer, Richard L; Eisenberg, Joel Fred; Ternes, Mark P; Schweitzer, Martin; Hendrick, Timothy P

    2012-08-01

    This report describes the third major evaluation of the Program, encompassing program years 2009 to 2011. In this report, this period of time is referred to as the ARRA Period. This is a special period of time for the Program because the American Recovery and Reinvestment Act (ARRA) of 2009 has allocated $5 billion of funding for the Program. In normal program years, WAP s annual appropriation is in the range of $200-250 million, supporting the weatherization of approximately 100,000 homes. With the addition of ARRA funding during these program years, the expectation is that weatherization activity will exceed 300,000 homes per year. In addition to saving energy and reducing low-income energy bills, expanded WAP funding is expected to stimulate the economy by providing new jobs in the weatherization field and allowing low-income households to spend more money on goods and services by spending less on energy.

  17. Geothermal Electricity Technology Evaluation Model (GETEM) Individual Case Files and Summary Spreadsheet (GETEM version Spring 2013)

    SciTech Connect (OSTI)

    Hanson, Steven CJ

    2013-03-07

    This group of files-- 10 GETEM individual case files and 1 summary spreadsheet-- contain final data from the revisions between summer 2011 and spring 2013.

  18. Geothermal Electricity Technology Evaluation Model (GETEM) Individual Case Files and Summary Spreadsheet (GETEM version Spring 2013)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Hanson, Steven CJ

    This group of files-- 10 GETEM individual case files and 1 summary spreadsheet-- contain final data from the revisions between summer 2011 and spring 2013.

  19. ARRA_Homes_Weatherized_by_State_for_February_4.14.11.pdf | Department of

    Broader source: Energy.gov (indexed) [DOE]

    Energy 72 KB) More Documents & Publications ARRA_Homes_Weatherized_by_State_for_January_4.14.11.pdf Homes_Weatherized_State_July_10.15.10.pdf Homes_Weatherized_by_State_for_July_10.13.10.pdf

  20. ARRA Material Handling Equipment Composite Data Products: Data through Quarter 3 of 2014; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    Ainscough, Chris; Kurtz, Jennifer

    2015-05-01

    This document includes 23 composite data products (CDPs) produced for American Recovery and Reinvestment Act (ARRA) fuel cell material handling equipment, with data through the third quarter of 2014.

  1. Davis-Bacon Act Wage Rates for ARRA-Funded State Energy Program Projects Involving Residential Weatherization Work

    Broader source: Energy.gov [DOE]

    Guidance on using appropriate prevailing wage rates for Davis-Bacon Act (DBA) covered weatherization work performed under the State Energy Program (SEP) using American Recovery and Reinvestment Act of 2009 (ARRA) funds.

  2. American Recovery & Reinvestment Act, ARRA, clean energy projects...

    Broader source: Energy.gov (indexed) [DOE]

    the District of Columbia reflect a broad range of clean energy projects, from energy efficiency and the smart grid to renewable energy and advanced battery manufacturing. Through ...

  3. EAC Recommendations on Grid Modernization: ARRA Accomplishments and Recommendations for Moving Forward

    Office of Energy Efficiency and Renewable Energy (EERE)

    This report, approved at the September 2015 EAC meeting, is a retrospective assessment of the value of the American Reinvestment and Recovery Act (ARRA) in encouraging the industry to take a substantial technical step forward. Additionally, it is a prospective look at the future of the smart grid and DOE's role moving forward. Further, this paper sets forth the EAC's recommendations for building on the ARRA smart grid-related accomplishments to continue the Nation's efforts to develop a smarter, more resilient grid. The purpose of this report is to provide input to the 2016 Smart Grid Systems Report that will include recommendations for State and Federal policies and actions that could help facilitate the transition to a smarter grid.

  4. Progress of DOE Materials, Manufacturing Process R&D, and ARRA Battery

    Broader source: Energy.gov (indexed) [DOE]

    Manufacturing Grants | Department of Energy 1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation es098_johnson_2011_o.pdf (1.22 MB) More Documents & Publications Progress of DOE Materials, Manufacturing Process R&D, and ARRA Battery Manufacturing Grants Vehicle Technologies Office: 2010 Energy Storage R&D Annual Progress Report Perfluoro Aryl Boronic Esters as Chemical Shuttle Additives

  5. Synchrophasor Technology Advancement in ARRA Projects: Final Report from the American Recovery and Reinvestment Act Projects

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advancement of Synchrophasor Technology in ARRA Projects │ ii ACKNOWLEDGMENTS This report was sponsored by the U.S. Department of Energy's (DOE) Office of Electricity Delivery and Energy Reliability (OE) and prepared by the Oak Ridge National Laboratory (ORNL). The effort was directed and supported by DOE Senior Advisor Joseph Paladino and DOE Program Managers Philip N. Overholt and Deborah Haught. The authors of this report were Jose R. Gracia (ORNL), Marcus A. Young, II, Ph.D. (ORNL), D. Tom

  6. More Than 1,000 Fuel Cell Units Deployed Through DOE ARRA Funding (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-07-01

    This NREL Hydrogen and Fuel Cell Technical Highlight describes how early market end users are operating 1,111 fuel cell units at 301 sites in 20 states with funding from the U.S. Department of Energy Fuel Cell Technologies Program and analysis by NREL. The American Recovery and Reinvestment Act (ARRA) funded the deployment of approximately 1,000 fuel cell systems in key early markets to accelerate the commercialization and deployment of fuel cells and fuel cell manufacturing, installation, maintenance, and support services. In support of the ARRA fuel cell deployment objectives, NREL analyzes and validates the technology in real-world applications, reports on the technology status, and facilitates the development of fuel cell technologies, manufacturing, and operations in strategic markets-including material handling equipment, backup power, and stationary power-where fuel cells can compete with conventional technologies. NREL is validating hydrogen and fuel cell systems in real-world settings through data collection, analysis, and reporting. The fuel cell and infrastructure analysis provides an independent, third-party assessment that focuses on fuel cell system and hydrogen infrastructure performance, operation, maintenance, use, and safety. An objective of the ARRA fuel cell project-to deploy approximately 1,000 fuel cell systems in key early markets - has been met in two years. By the end of 2011, 504 material handling equipment (MHE) fuel cell units were operating at 8 facilities and 607 backup power fuel cell units were operating at 293 sites. MHE and backup power are two markets where fuel cells are capable of meeting the operating demands, and deployments can be leveraged to accelerate fuel cell commercialization.

  7. ARRA875D Recovery Act - Recip Reporting Summary by Project Website

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Recipient Reporting Summary by Project" "For Quarter Ending December 31, 2010 - ARRA Awards Subject to Section 1512 Reporting" "Total Awarded and Total Outlaid are as of Quarter End." "Data from FR.gov is as of 1/29/2011 9:42:31 PM" "DOE Program Office Name","DOE Project Name","Total Awarded","Total Outlaid","FR.gov Jobs" "Advanced Research Projects Agency - Energy","Advanced Research Projects

  8. Case Study for the ARRA-funded GSHP Demonstration at University at Albany

    SciTech Connect (OSTI)

    Liu, Xiaobing; Malhotra, Mini; Xiong, Zeyu

    2015-03-01

    High initial costs and lack of public awareness of ground-source heat pump (GSHP) technology are the two major barriers preventing rapid deployment of this energy-saving technology in the United States. Under the American Recovery and Reinvestment Act (ARRA), 26 GSHP projects have been competitively selected and carried out to demonstrate the benefits of GSHP systems and innovative technologies for cost reduction and/or performance improvement. This report highlights the findings of a case study of one of the ARRA-funded GSHP demonstration projects—a distributed GSHP system at a new 500-bed apartment-style student residence hall at the University at Albany. This case study is based on the analysis of detailed design documents, measured performance data, published catalog data of heat pump equipment, and actual construction costs. Simulations with a calibrated computer model are performed for both the demonstrated GSHP system and a baseline heating, ventilation, and airconditioning (HVAC) system to determine the energy savings and other related benefits achieved by the GSHP system. The evaluated performance metrics include the energy efficiency of the heat pump equipment and the overall GSHP system, as well as the pumping performance, energy savings, carbon emission reductions, and cost-effectiveness of the demonstrated GSHP system compared with the baseline HVAC system. This case study also identifies opportunities for improving the operational efficiency of the demonstrated GSHP system.

  9. Case study for ARRA-funded ground-source heat pump (GSHP) demonstration at Oakland University

    SciTech Connect (OSTI)

    Im, Piljae; Liu, Xiaobing

    2015-09-01

    High initial costs and lack of public awareness of ground-source heat pump (GSHP) technology are the two major barriers preventing rapid deployment of this energy-saving technology in the United States. Under the American Recovery and Reinvestment Act (ARRA), 26 GSHP projects have been competitively selected and carried out to demonstrate the benefits of GSHP systems and innovative technologies for cost reduction and/or performance improvement. This paper highlights the findings of a case study of one of the ARRA-funded GSHP demonstration projects, a ground-source variable refrigerant flow (GS-VRF) system installed at the Human Health Building at Oakland University in Rochester, Michigan. This case study is based on the analysis of measured performance data, maintenance records, construction costs, and simulations of the energy consumption of conventional central heating, ventilation, and air-conditioning (HVAC) systems providing the same level of space conditioning as the demonstrated GS-VRF system. The evaluated performance metrics include the energy efficiency of the heat pump equipment and the overall GS-VRF system, pumping performance, energy savings, carbon emission reductions, and cost-effectiveness of the GS-VRF system compared with conventional HVAC systems. This case study also identified opportunities for reducing uncertainties in the performance evaluation, improving the operational efficiency, and reducing the installed cost of similar GSHP systems in the future.

  10. DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM (SEP) PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK

    Broader source: Energy.gov [DOE]

    Guidance on using appropriate prevailing wage rates for all Davis-Bacon Act (DBA) covered-work, including weatherization work, performed under the State Energy (SEP) Program using American Recovery and Reinvestment Act of 2009 (ARRA) funds to ensure compliance with DBA requirements.

  11. Better Buildings Residential Network Workforce/Business Partners Peer Exchange Call: Energy Advising Services in the Post-ARRA World Call Slides and Summary, June 27, 2013

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workforce/Business Partners Peer Exchange Call: Energy Advising Services in the Post-ARRA World Call Slides and Summary Agenda * Call Logistics and Introductions * Introducing the Better Buildings Residential Network * Future Call Topics * Discussion:  What experiences or plans do programs have offering energy advising or energy concierge services without American Recovery and Reinvestment Act (ARRA) grants?  What fees or other funding models are programs exploring for these services

  12. AVTA- ARRA

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following report describes lessons learned about the consumer charging behavior from the EV Project. The EV Project partnered with city, regional and state governments, utilities, and other organizations in 16 cities to deploy about 14,000 Level 2 PEV chargers and 300 DC fast chargers. It also deployed 5,700 all-electric Nissan Leafs and 2,600 plug-in hybrid electric Chevrolet Volts. This research was conducted by Idaho National Laboratory.

  13. National Weatherization Assistance Program Characterization - Describing the Pre-ARRA Progam

    SciTech Connect (OSTI)

    Bensch, Ingo; Keene, Ashleigh; Cowan, Claire; Koski, Karen

    2014-09-01

    This report characterizes the Department of Energy s Weatherization Assistance Program (WAP) as it was administered in Program Year 2008. WAP has supported energy efficiency improvements to the homes of low-income households in the United States since 1976. The program provides grants, guidance, and other support to grantees: weatherization programs administered by each of the 50 states, the District of Columbia and some Native American tribes. Although there have been studies of some grantee-administered weatherization programs, the overall effectiveness of the national weatherization program has not been formally evaluated since Program Year 1989. Since that time, the program has evolved significantly, with an increased focus on baseload electric usage, continued evolution of diagnostic tools, new guidelines and best practices for heating-related measures, and adjustments in program rules. More recently, the program has also adjusted to large, temporary funding increases and changes in federal rules spurred by the American Recovery and Reinvestment Act (ARRA). Because the Weatherization Assistance Program of today is dramatically different from the one evaluated in 1989, DOE determined to undertake a new comprehensive evaluation of the national program. This new national evaluation is managed by Oak Ridge National Laboratory (ORNL). Under a competitive solicitation process, ORNL selected APPRISE, Inc., Blasnik & Associates, Dalhoff Associates and the Energy Center of Wisconsin to conduct the evaluation. The national evaluation comprises two independent evaluations. The first evaluation of which this report is a part focuses on Program Year 2008 (PY08). The second evaluation focuses on the ARRA-funded years of 2009 through 2011. This report, together with its companion the Eligible Population Study addresses specific program characterization goals established for the greater evaluation. The Energy Center led grantee and subgrantee data collection efforts

  14. THE POSITIVE IMPACTS OF AMERICAN REINVESTMENT AND RECOVERY ACT (ARRA) FUNDING TO THE WASTE MANAGEMENT PROGRAM ON HANFORD'S PLATEAU REMEDIATION PROJECT

    SciTech Connect (OSTI)

    BLACKFORD LT

    2010-01-19

    In April 2009, the Department of Energy (DOE) Richland Operations Office (RL) was allocated $1.6 billion (B) in ARRA funding to be applied to cleanup projects at the Hanford Site. DOE-RL selected projects to receive ARRA funding based on 3-criteria: creating/saving jobs, reducing the footprint of the Hanford Site, and reducing life-cycle costs for cleanup. They further selected projects that were currently covered under regulatory documents and existing prime contracts, which allowed work to proceed quickly. CH2M HILL Plateau Remediation Company (CHPRC) is a prime contractor to the DOE focused on the environmental cleanup of the DOE Hanford Site Central Plateau. CHPRC was slated to receive $1.36B in ARRA funding. As of January, 2010, CHPRC has awarded over $200 million (M) in subcontracts (64% to small businesses), created more that 1,100 jobs, and touched more than 2,300 lives - all in support of long-term objectives for remediation of the Central Plateau, on or ahead of schedule. ARRA funding is being used to accelerate and augment cleanup activities already underway under the baseline Plateau Remediation Contract (PRC). This paper details challenges and accomplishments using ARRA funding to meet DOE-RL objectives of creating/saving jobs, expediting cleanup, and reducing lifecycle costs for cleanup during the first months of implementation.

  15. DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANT (EECBG) PROGRAM PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK

    Broader source: Energy.gov [DOE]

    Guidance on using appropriate prevailing wage rates for all Davis-Bacon Act (DBA) covered-work, including weatherization work, performed under the Energy Efficiency and Conservation Block Grants (EECBG) Program using American Recovery and Reinvestment Act of 2009 (ARRA) funds to ensure compliance with DBA requirements.

  16. Case Study of The ARRA-Funded GSHP Demonstration at the Natural Sources Building, Montana Tech

    SciTech Connect (OSTI)

    Malhotra, Mini; Liu, Xiaobing

    2015-04-01

    Under the American Recovery and Reinvestment Act (ARRA), 26 ground source heat pump (GSHP) projects were competitively selected in 2009 to demonstrate the benefits of GSHP systems and innovative technologies for cost reduction and/or performance improvement. One of the selected demonstration projects was proposed by Montana Tech of the University of Montana for a 56,000 sq ft, newly constructed, on-campus research facility – the Natural Resources Building (NRB) located in Butte, Montana. This demonstrated GSHP system consists of a 50 ton water-to-water heat pump and a closed-loop ground heat exchanger with two redundant 7.5 hp constant-speed pumps to use water in the nearby flooded mines as a heat source or heat sink. It works in conjunction with the originally installed steam HX and an aircooled chiller to provide space heating and cooling. It is coupled with the existing hot water and chilled water piping in the building and operates in the heating or cooling mode based on the outdoor air temperature. The ground loop pumps operate in conjunction with the existing pumps in the building hot and chilled water loops for the operation of the heat pump unit. The goal of this demonstration project is to validate the technical and economic feasibility of the demonstrated commercial-scale GSHP system in the region, and illustrate the feasibility of using mine waters as the heat sink and source for GSHP systems. Should the demonstration prove satisfactory and feasible, it will encourage similar GSHP applications using mine water, thus help save energy and reduce carbon emissions. The actual performance of the system is analyzed with available measured data for January through July 2014. The annual energy performance is predicted and compared with a baseline scenario, with the heating and cooling provided by the originally designed systems. The comparison is made in terms of energy savings, operating cost savings, cost-effectiveness, and environmental benefits. Finally

  17. CalTOX (registered trademark), A multimedia total exposure model spreadsheet user's guide. Version 4.0(Beta)

    SciTech Connect (OSTI)

    McKone, T.E.; Enoch, K.G.

    2002-08-01

    CalTOX has been developed as a set of spreadsheet models and spreadsheet data sets to assist in assessing human exposures from continuous releases to multiple environmental media, i.e. air, soil, and water. It has also been used for waste classification and for setting soil clean-up levels at uncontrolled hazardous wastes sites. The modeling components of CalTOX include a multimedia transport and transformation model, multi-pathway exposure scenario models, and add-ins to quantify and evaluate uncertainty and variability. All parameter values used as inputs to CalTOX are distributions, described in terms of mean values and a coefficient of variation, rather than as point estimates or plausible upper values such as most other models employ. This probabilistic approach allows both sensitivity and uncertainty analyses to be directly incorporated into the model operation. This manual provides CalTOX users with a brief overview of the CalTOX spreadsheet model and provides instructions for using the spreadsheet to make deterministic and probabilistic calculations of source-dose-risk relationships.

  18. Compliance with Section 15 12 Reporting Requirements of the American Recovery and Reinvestment Act of 2009 (ARRA)

    Broader source: Energy.gov [DOE]

    Compliance with the reporting requirements of Section 15 12 is a main focus of post-award activities for awards funded by ARRA. The Recovery Operations Group of the Office of Performance Analysis and Evaluation in the Office of the Chief Financial Officer has been tracking compliance with the reporting requirement for DOE. They developed the attached list of contractors and recipients that have failed to report. Most of those not reporting are recipients receiving money from the Office of Energy Efficiency and Renewable Energy. Contracting Officers are asked to review the attached list for Contractors/Recipients under their cognizance and to send a letter to the requesting their attention, explanation and compliance. Draft templates of letters for a single or double non-compliance are attached. As the next reporting period is from April 1 to April 10,2010, Contracting Officers are requested to send the letter before April 1.

  19. Recipient Reporting Summary by Project | Department of Energy

    Energy Savers [EERE]

    Office spreadsheet icon ARRA875DRecipRptSumProj (4).xls File ARRA875D Recovery Act - ... 2011 Above on the left is K-25, at Oak Ridge before and after the 844,000 sq-ft demolition. ...

  20. Solicitation and Selection of Partner Projects, Technical Team Leads, and Measurement and Validation Contractors for the American Recovery and Reinvestment Act (ARRA) Funded Commercial Building Partnerships (CBP-2)

    SciTech Connect (OSTI)

    Nesse, Ronald J.; Baechler, Michael C.; Iverson, Megan M.

    2010-09-30

    In March 2010, Pacific Northwest National Laboratory (PNNL) joined two other labs receiving ARRA funding, Lawrence Berkeley National Laboratory (LBNL) and the National Renewable National Laboratory (NREL), to began weekly conference calls with the goal of coordinating a joint lab solicitation to support the ARRA-funded CBP project. Two solicitations were identified for: 1) new CBP Partners; 2) technical contractors to provide technical assistance and measurement and verification (M&V) contractors. The M&V contractors support the work by providing model reviews and conducting monitoring studies to verify building performance. This report documents the process used by the labs for the solicitations, and describes the process and outcomes for PNNL, selection of candidate Partners, technical teams, and M&V contractors.

  1. A spreadsheet-coupled SOLGAS: A computerized thermodynamic equilibrium calculation tool. Revision 1

    SciTech Connect (OSTI)

    Trowbridge, L.D.; Leitnaker, J.M.

    1995-07-01

    SOLGAS, an early computer program for calculating equilibrium in a chemical system, has been made more user-friendly, and several ``bells and whistles`` have been added. The necessity to include elemental species has been eliminated. The input of large numbers of starting conditions has been automated. A revised spreadsheet-based format for entering data, including non-ideal binary and ternary mixtures, simplifies and reduces chances for error. Calculational errors by SOLGAS are flagged, and several programming errors are corrected. Auxiliary programs are available to assemble and partially automate plotting of large amounts of data. Thermodynamic input data can be changed on line. The program can be operated with or without a co-processor. Copies of the program, suitable for the IBM-PC or compatibles with at least 384 bytes of low RAM, are available from the authors. This user manual contains appendices with examples of the use of SOLGAS. These range from elementary examples, such as, the relationships among water, ice, and water vapor, to more complex systems: phase diagram calculation of UF{sub 4} and UF{sub 6} system; burning UF{sub 4} in fluorine; thermodynamic calculation of the Cl-F-O-H system; equilibria calculations in the CCl{sub 4}--CH{sub 3}OH system; and limitations applicable to aqueous solutions. An appendix also contains the source code.

  2. Update to the DOE Implementation Guide for the American Recovery and Reinvestment Act (ARRA) of 2009

    Broader source: Energy.gov [DOE]

    The purpose of this flash is to issue Attachment 13 to the subject Guide titled, "Recovery Act Buy American Requirements for Information Needed from Financial Assistance Applicants/Recipients for Waiver Requests Based on Unreasonable Cost or Nonavailability." Also issued in this flash is an updated Errata Sheet (Appendix A to the subject Guide) that reflects the addition of the new attachment.

  3. REFLECT HOME

    Broader source: Energy.gov [DOE]

    Sacramento is nicknamed the City of Trees, so it made sense for the California State University, Sacramento, team to showcase nature in its Solar Decathlon 2015 project. The team’s Reflect Home does just that by embracing the city’s sense of expansive greenery.

  4. American Recovery and Reinvestment Act (ARRA) Federal Energy Management Program Technical Assistance Project 282 Renewable Energy Opportunities at Fort Gordon, Georgia

    SciTech Connect (OSTI)

    Boyd, Brian K.; Gorrissen, Willy J.; Hand, James R.; Horner, Jacob A.; Orrell, Alice C.; Russo, Bryan J.; Weimar, Mark R.; Williamson, Jennifer L.; Nesse, Ronald J.

    2010-09-30

    This document provides an overview of renewable resource potential at Fort Gordon, based primarily upon analysis of secondary data sources supplemented with limited on-site evaluations. This effort focuses on grid-connected generation of electricity from renewable energy sources and also on ground source heat pumps for heating and cooling buildings. The effort was funded by the American Recovery and Reinvestment Act (ARRA) as follow-on to the 2005 Department of Defense (DoD) Renewables Assessment. The site visit to Fort Gordon took place on March 9, 2010.

  5. Comprehensive Energy Assessment: EE and RE Project Optimization Modeling for United States Pacific Command (USPACOM) American Recovery and Reinvestment Act (ARRA) FEMP Technical Assistance

    SciTech Connect (OSTI)

    Brigantic, Robert T.; Papatyi, Anthony F.; Perkins, Casey J.

    2010-09-30

    This report summarizes a study and corresponding model development conducted in support of the United States Pacific Command (USPACOM) as part of the Federal Energy Management Program (FEMP) American Reinvestment and Recovery Act (ARRA). This research was aimed at developing a mathematical programming framework and accompanying optimization methodology in order to simultaneously evaluate energy efficiency (EE) and renewable energy (RE) opportunities. Once developed, this research then demonstrated this methodology at a USPACOM installation - Camp H.M. Smith, Hawaii. We believe this is the first time such an integrated, joint EE and RE optimization methodology has been constructed and demonstrated.

  6. Case Study for the ARRA-funded Ground Source Heat Pump Demonstration at Denver Museum of Nature & Science

    SciTech Connect (OSTI)

    Im, Piljae; Liu, Xiaobing

    2015-11-30

    High initial costs and lack of public awareness of ground-source heat pump (GSHP) technology are the two major barriers preventing rapid deployment of this energy-saving technology in the United States. Under the American Recovery and Reinvestment Act (ARRA), 26 GSHP projects were competitively selected and carried out to demonstrate the benefits of GSHP systems and innovative technologies for cost reduction and/or performance improvement. This report highlights the findings of a case study of one such GSHP demonstration projects that uses a recycled water heat pump (RWHP) system installed at the Denver Museum of Nature & Science in Denver, Colorado. The RWHP system uses recycled water from the city’s water system as the heat sink and source for a modular water-to-water heat pump (WWHP). This case study was conducted based on the available measured performance data from December 2014 through August 2015, utility bills of the building in 2014 and 2015, construction drawings, maintenance records, personal communications, and construction costs. The annual energy consumption of the RWHP system was calculated based on the available measured data and other related information. It was compared with the performance of a baseline scenario— a conventional VAV system using a water-cooled chiller and a natural gas fired boiler, both of which have the minimum energy efficiencies allowed by ASHRAE 90.1-2010. The comparison was made to determine energy savings, operating cost savings, and CO2 emission reductions achieved by the RWHP system. A cost analysis was performed to evaluate the simple payback of the RWHP system. Summarized below are the results of the performance analysis, the learned lessons, and recommended improvement in the operation of the RWHP system.

  7. Weatherization Works II - Summary of Findings from the ARRA Period Evaluation of the U.S. Department of Energy's Weatherization Assistance Program

    SciTech Connect (OSTI)

    Tonn, Bruce Edward; Carroll, David; Rose, Erin M.; Hawkins, Beth A.; Pigg, Scott; Dalhoff, Greg; Blasnik, Michael; Eisenberg, Joel Fred; Cowan, Claire; Conlon, Brian

    2015-10-01

    This report presents a summary of the American Recovery and Reinvestment Act of 2009 (ARRA) evaluation of the U.S. Department of Energy s low-income Weatherization Program. This evaluation focused on the WAP Program Year 2010. The ARRA evaluation produced fourteen separate reports, including this summary. Three separate reports address the energy savings, energy cost savings, and cost effectiveness of WAP across four housing types: single family, mobile home, and large multifamily. Other reports address the environmental emissions benefits attributable to WAP, and characterize the program. Special studies were conducted to: estimate the impacts of weatherization and healthy homes interventions on asthma-related Medicaid claims in a small cohort in Washington State; assess how weatherization recipients communicate their weatherization experiences to those in their social network, and assess processes implemented to defer homes for weatherization. Small studies addressed energy use in refrigerators, WAP as implemented in the U.S. territories for the first time, and weatherization s impacts on air conditioning energy savings. The national occupant survey was mined for additional insights on the impacts of weatherization on household budgets and energy behaviors post-weatherization. Lastly, the results of a survey of weatherization training centers are summarized.

  8. 371ARRA.pdf

    National Nuclear Security Administration (NNSA)

  9. 373ARRA.pdf

    National Nuclear Security Administration (NNSA)

  10. 374ARRA.pdf

    National Nuclear Security Administration (NNSA)

  11. 377ARRA.pdf

    National Nuclear Security Administration (NNSA)

  12. 382ARRA.pdf

    National Nuclear Security Administration (NNSA)

  13. 385ARRA.pdf

    National Nuclear Security Administration (NNSA)

  14. 386ARRA.pdf

    National Nuclear Security Administration (NNSA)

  15. 391ARRA.pdf

    National Nuclear Security Administration (NNSA)

  16. 392ARRA .pdf

    National Nuclear Security Administration (NNSA)

  17. 397ARRA.pdf

    National Nuclear Security Administration (NNSA)

  18. LANL147ARRA .pdf

    National Nuclear Security Administration (NNSA)

  19. Microsoft Word - ARRA Cover

    Broader source: Energy.gov (indexed) [DOE]

    ... income of 30,701 exceeded the 200 percent poverty level of 21,660 by the amount noted. ... income is at or below 200 percent of the poverty level as determined in accordance with ...

  20. The ARRA EAP En

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 THE AMERICAN RECOVERY AND REINVESTMENT ACT VOLUME 1, NUMBER 3 Need to Know New Website for LEAP Grant Recipients Energy Assurance Planning Framework Available for LEAP Grant Recipients Information on Energy Emergency Exercises News from the States Alaska Energy Bill Action Items Energy Disruption Tracking Systems Local PMPs/WDPs Reminders Training Opportunities LEAP Webinars/ Conference Calls State Regional Conference Calls GIS Webinar Other Useful Links and Information Information on How to

  1. The ARRA EAP En

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1, 2010 THE AMERICAN RECOVERY AND REINVESTMENT ACT VOLUME 1, NUMBER 4 Need to Know DOE/OE 10-Step Framework Now Available Looking ahead: DOE/OE Regional Exercises News from the States NJ Wind Energy Bill Training Opportunities Upcoming State and Local Informational Sessions Ongoing LEAP Webinars/Regional Calls Action Items Quarterly Progress Reports, 1512 Reports Reminders State and Local Energy Assurance Success Stories Iowa Asheville, NC Other Useful Information and Links DOE/OE Hardening and

  2. The ARRA EAP En

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    JANUARY 3, 2011 THE AMERICAN RECOVERY AND REINVESTMENT ACT VOLUME 2, NUMBER 1 Need to Know DOE/OE Regional Tabletop Exercise "Smart Grid and Cyber Security for Energy Assurance" Upcoming Events NARUC Winter Meetings National Electricity Forum NASEO/ASERTTI Energy Policy and Technology Outlook Conference Action Items Initial State EA Plans Tabletop Exercises Reminders Energy Assurance Success Stories Phoenix, AZ Speedway, IN Other Useful Information and Links 2010 Energy Sector Specific

  3. The ARRA EAP En

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    APRIL 1, 2011 THE AMERICAN RECOVERY AND REINVESTMENT ACT VOLUME 2, NUMBER 2 Need to Know Second DOE/OE Regional Tabletop Exercise PTI Local Government Energy Assurance Guidelines, Vers. 2.0 News from the States CA Electric Utilities Meeting Renewable Energy Goals Action Items Tabletop Exercises Activities Reporting Deadlines Reminders Upcoming Events EIA 2011 Conference 2011 PNWER Summit Energy Assurance Success Stories Red Earth Exercise Recap Other Useful Information and Links NARUC

  4. The ARRA EAP En

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 THE AMERICAN RECOVERY AND REINVESTMENT ACT VOLUME 2, NUMBER 3 Need to Know Third DOE/OE Regional Tabletop Exercise Action Items DOE to Request Sharing of State EA Plans Exercise and Reporting Deadlines News from the States Smart Grid Comes to Cities in Ohio Energy Assurance Success Stories Chicago, IL Portland, OR Other Useful Information and Links Hurricane Season Resources Energy Assurance Daily This Week in Petroleum Upcoming Events PNWER Annual Summit NARUC Summer Committee Meetings NASEO

  5. ARRA Electrification Projects

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    U.S. Department of Energy funded multiple electrification projects through the American ... The U.S. Department of Energy funded multiple electrification projects through the ...

  6. Microsoft Word - ARRA cover

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Department of Energy Office of Inspector General Office of Audit Services Audit Report Selected Aspects of the Commonwealth of Pennsylvania's Efforts to Implement the American Recovery and Reinvestment Act Weatherization Assistance Program OAS-RA-11-02 November 2010 Department of Energy Washington, DC 20585 November 1, 2010 MEMORANDUM FOR THE ASSISTANT SECRETARY FOR ENERGY EFFICIENCY AND RENEWABLE ENERGY FROM: George W. Collard Assistant Inspector General for National Security and Energy

  7. Review of Literature for Inputs to the National Water Savings Model and Spreadsheet Tool-Commercial/Institutional

    SciTech Connect (OSTI)

    Whitehead, Camilla Dunham; Melody, Moya; Lutz, James

    2009-05-29

    Lawrence Berkeley National Laboratory (LBNL) is developing a computer model and spreadsheet tool for the United States Environmental Protection Agency (EPA) to help estimate the water savings attributable to their WaterSense program. WaterSense has developed a labeling program for three types of plumbing fixtures commonly used in commercial and institutional settings: flushometer valve toilets, urinals, and pre-rinse spray valves. This National Water Savings-Commercial/Institutional (NWS-CI) model is patterned after the National Water Savings-Residential model, which was completed in 2008. Calculating the quantity of water and money saved through the WaterSense labeling program requires three primary inputs: (1) the quantity of a given product in use; (2) the frequency with which units of the product are replaced or are installed in new construction; and (3) the number of times or the duration the product is used in various settings. To obtain the information required for developing the NWS-CI model, LBNL reviewed various resources pertaining to the three WaterSense-labeled commercial/institutional products. The data gathered ranged from the number of commercial buildings in the United States to numbers of employees in various sectors of the economy and plumbing codes for commercial buildings. This document summarizes information obtained about the three products' attributes, quantities, and use in commercial and institutional settings that is needed to estimate how much water EPA's WaterSense program saves.

  8. Scintillator reflective layer coextrusion

    DOE Patents [OSTI]

    Yun, Jae-Chul; Para, Adam

    2001-01-01

    A polymeric scintillator has a reflective layer adhered to the exterior surface thereof. The reflective layer comprises a reflective pigment and an adhesive binder. The adhesive binder includes polymeric material from which the scintillator is formed. A method of forming the polymeric scintillator having a reflective layer adhered to the exterior surface thereof is also provided. The method includes the steps of (a) extruding an inner core member from a first amount of polymeric scintillator material, and (b) coextruding an outer reflective layer on the exterior surface of the inner core member. The outer reflective layer comprises a reflective pigment and a second amount of the polymeric scintillator material.

  9. CREST Cost of Renewable Energy Spreadsheet Tool: A Model for Developing Cost-based Incentives in the United States. User Manual Version 1

    SciTech Connect (OSTI)

    Gifford, Jason S.; Grace, Robert C.

    2011-03-01

    This user manual helps model users understands how to use the CREST model to support renewable energy incentives, FITs, and other renewable energy rate-setting processes. It reviews the spreadsheet tool, including its layout and conventions, offering context on how and why it was created. It also provides instructions on how to populate the model with inputs that are appropriate for a specific jurisdiction’s policymaking objectives and context. And, it describes the results and outlines how these results may inform decisions about long-term renewable energy support programs.

  10. Estimating Policy-Driven Greenhouse Gas Emissions Trajectories in California: The California Greenhouse Gas Inventory Spreadsheet (GHGIS) Model

    SciTech Connect (OSTI)

    Greenblatt, Jeffery B.

    2013-10-10

    A California Greenhouse Gas Inventory Spreadsheet (GHGIS) model was developed to explore the impact of combinations of state policies on state greenhouse gas (GHG) and regional criteria pollutant emissions. The model included representations of all GHG- emitting sectors of the California economy (including those outside the energy sector, such as high global warming potential gases, waste treatment, agriculture and forestry) in varying degrees of detail, and was carefully calibrated using available data and projections from multiple state agencies and other sources. Starting from basic drivers such as population, numbers of households, gross state product, numbers of vehicles, etc., the model calculated energy demands by type (various types of liquid and gaseous hydrocarbon fuels, electricity and hydrogen), and finally calculated emissions of GHGs and three criteria pollutants: reactive organic gases (ROG), nitrogen oxides (NOx), and fine (2.5 ?m) particulate matter (PM2.5). Calculations were generally statewide, but in some sectors, criteria pollutants were also calculated for two regional air basins: the South Coast Air Basin (SCAB) and the San Joaquin Valley (SJV). Three scenarios were developed that attempt to model: (1) all committed policies, (2) additional, uncommitted policy targets and (3) potential technology and market futures. Each scenario received extensive input from state energy planning agencies, in particular the California Air Resources Board. Results indicate that all three scenarios are able to meet the 2020 statewide GHG targets, and by 2030, statewide GHG emissions range from between 208 and 396 MtCO2/yr. However, none of the scenarios are able to meet the 2050 GHG target of 85 MtCO2/yr, with emissions ranging from 188 to 444 MtCO2/yr, so additional policies will need to be developed for California to meet this stringent future target. A full sensitivity study of major scenario assumptions was also performed. In terms of criteria pollutants

  11. Neutron reflecting supermirror structure

    DOE Patents [OSTI]

    Wood, James L.

    1992-01-01

    An improved neutron reflecting supermirror structure comprising a plurality of stacked sets of bilayers of neutron reflecting materials. The improved neutron reflecting supermirror structure is adapted to provide extremely good performance at high incidence angles, i.e. up to four time the critical angle of standard neutron mirror structures. The reflection of neutrons striking the supermirror structure at a high critical angle provides enhanced neutron throughput, and hence more efficient and economical use of neutron sources.

  12. Neutron reflecting supermirror structure

    DOE Patents [OSTI]

    Wood, J.L.

    1992-12-01

    An improved neutron reflecting supermirror structure comprising a plurality of stacked sets of bilayers of neutron reflecting materials. The improved neutron reflecting supermirror structure is adapted to provide extremely good performance at high incidence angles, i.e. up to four time the critical angle of standard neutron mirror structures. The reflection of neutrons striking the supermirror structure at a high critical angle provides enhanced neutron throughput, and hence more efficient and economical use of neutron sources. 2 figs.

  13. Idaho National Laboratory’s Analysis of ARRA-Funded Plug-in Electric Vehicle and Charging Infrastructure Projects: Final Report

    SciTech Connect (OSTI)

    Francfort, Jim; Bennett, Brion; Carlson, Richard; Garretson, Thomas; Gourley, LauraLee; Karner, Donal; McGuire, Patti; Scoffield, Don; Kirkpatrick, Mindy; Shrik, Matthew; Salisbury, Shawn; Schey, Stephen; Smart, John; White, Sera; Wishard, Jeffery

    2015-09-01

    Battelle Energy Alliance, LLC, managing and operating contractor for the U.S. Department of Energy’s (DOE) Idaho National Laboratory (INL), is the lead laboratory for U.S. Department of Energy’s Advanced Vehicle Testing Activity (AVTA). INL’s conduct of the AVTA resulted in a significant base of knowledge and experience in the area of testing light-duty vehicles that reduced transportation-related petroleum consumption. Due to this experience, INL was tasked by DOE to develop agreements with companies that were the recipients of The American Recovery and Reinvestment Act of 2009 (ARRA) grants, that would allow INL to collect raw data from light-duty vehicles and charging infrastructure. INL developed non-disclosure agreements (NDAs) with several companies and their partners that resulted in INL being able to receive raw data via server-to-server connections from the partner companies. This raw data allowed INL to independently conduct data quality checks, perform analysis, and report publicly to DOE, partners, and stakeholders, how drivers used both new vehicle technologies and the deployed charging infrastructure. The ultimate goal was not the deployment of vehicles and charging infrastructure, cut rather to create real-world laboratories of vehicles, charging infrastructure and drivers that would aid in the design of future electric drive transportation systems. The five projects that INL collected data from and their partners are: • ChargePoint America - Plug-in Electric Vehicle Charging Infrastructure Demonstration • Chrysler Ram PHEV Pickup - Vehicle Demonstration • General Motors Chevrolet Volt - Vehicle Demonstration • The EV Project - Plug-in Electric Vehicle Charging Infrastructure Demonstration • EPRI / Via Motors PHEVs – Vehicle Demonstration The document serves to benchmark the performance science involved the execution, analysis and reporting for the five above projects that provided lessons learned based on driver’s use of the

  14. Tandem resonator reflectance modulator

    DOE Patents [OSTI]

    Fritz, Ian J. (Albuquerque, NM); Wendt, Joel R. (Albuquerque, NM)

    1994-01-01

    A wide band optical modulator is grown on a substrate as tandem Fabry-Perot resonators including three mirrors spaced by two cavities. The absorption of one cavity is changed relative to the absorption of the other cavity by an applied electric field, to cause a change in total reflected light, as light reflecting from the outer mirrors is in phase and light reflecting from the inner mirror is out of phase with light from the outer mirrors.

  15. Tandem resonator reflectance modulator

    DOE Patents [OSTI]

    Fritz, I.J.; Wendt, J.R.

    1994-09-06

    A wide band optical modulator is grown on a substrate as tandem Fabry-Perot resonators including three mirrors spaced by two cavities. The absorption of one cavity is changed relative to the absorption of the other cavity by an applied electric field, to cause a change in total reflected light, as light reflecting from the outer mirrors is in phase and light reflecting from the inner mirror is out of phase with light from the outer mirrors. 8 figs.

  16. Reflective diffraction grating

    DOE Patents [OSTI]

    Lamartine, Bruce C.

    2003-06-24

    Reflective diffraction grating. A focused ion beam (FIB) micromilling apparatus is used to store color images in a durable medium by milling away portions of the surface of the medium to produce a reflective diffraction grating with blazed pits. The images are retrieved by exposing the surface of the grating to polychromatic light from a particular incident bearing and observing the light reflected by the surface from specified reception bearing.

  17. Neutron reflecting supermirror structure

    DOE Patents [OSTI]

    Wood, James L.

    1992-01-01

    An improved neutron reflecting supermirror structure comprising a plurality of stacked sets of bilayers of neutron reflecting materials. The improved neutron reflecting supermirror structure is adapted to provide extremely good performance at high incidence angles, i.e. up to four time the critical angle of standard neutron mirror structures. The reflection of neutrons striking the supermirror structure at a high critical angle provides enhanced neutron throughput, and hence more efficient and economical use of neutron sources. One layer of each set of bilayers consist of titanium, and the second layer of each set of bilayers consist of an alloy of nickel with carbon interstitially present in the nickel alloy.

  18. Renewable liquid reflection grating

    DOE Patents [OSTI]

    Ryutov, Dmitri D.; Toor, Arthur

    2003-10-07

    A renewable liquid reflection grating. Electrodes are operatively connected to a conducting liquid in an arrangement that produces a reflection grating and driven by a current with a resonance frequency. In another embodiment, the electrodes create the grating by a resonant electrostatic force acting on a dielectric liquid.

  19. Property:Reference material | Open Energy Information

    Open Energy Info (EERE)

    ARRA Spreadsheet + 2-M Probe At Gabbs Alkali Flat Area (Kratt, Et Al., 2008) + A New Gold Pan For The West- Discovering Blind Geothermal Systems With Shallow Temperature Surveys...

  20. EM RAP for TWPC ARRA

    Office of Environmental Management (EM)

    and Ohio Power. Mike has 18 years of experience in the DOE weapons complex at Rocky Flats, Hanford, and Oak Ridge, assessing and improving organizational performance, using...

  1. LANLA076ARRA.pdf

    National Nuclear Security Administration (NNSA)

  2. LANLA085ARRA.pdf

    National Nuclear Security Administration (NNSA)

  3. LANLA087ARRA.pdf

    National Nuclear Security Administration (NNSA)

  4. LANLA088ARRA.pdf

    National Nuclear Security Administration (NNSA)

  5. LANLA090ARRA.pdf

    National Nuclear Security Administration (NNSA)

  6. LANLA091ARRA.pdf

    National Nuclear Security Administration (NNSA)

  7. LANLA092ARRA.pdf

    National Nuclear Security Administration (NNSA)

  8. LANLA093ARRA.pdf

    National Nuclear Security Administration (NNSA)

  9. LANLA094ARRA.pdf

    National Nuclear Security Administration (NNSA)

  10. LANLA095ARRA.pdf

    National Nuclear Security Administration (NNSA)

  11. LANLA096ARRA.pdf

    National Nuclear Security Administration (NNSA)

  12. LANLA097ARRA.pdf

    National Nuclear Security Administration (NNSA)

  13. LANLA098ARRA.pdf

    National Nuclear Security Administration (NNSA)

  14. LANLA099ARRA.pdf

    National Nuclear Security Administration (NNSA)

  15. LANLA100ARRA.pdf

    National Nuclear Security Administration (NNSA)

  16. LANLA105ARRA.pdf

    National Nuclear Security Administration (NNSA)

  17. LANLA107ARRA.pdf

    National Nuclear Security Administration (NNSA)

  18. LANLM068ARRA.pdf

    National Nuclear Security Administration (NNSA)

  19. SEP/ARRA Evaluation Webinar

    Broader source: Energy.gov (indexed) [DOE]

    Energy One of several Georgia convenience stores that improved lighting while saving energy and money. | Courtesy of Outlaw Consulting, Inc. One of several Georgia convenience stores that improved lighting while saving energy and money. | Courtesy of Outlaw Consulting, Inc. Convenience stores across Georgia are saving energy thanks to energy efficient lighting upgrades made possible by Recovery Act funds from the State Energy Program and the Georgia Environmental Finance Authority. Learn

  20. AVTA: ARRA EV Project Overview

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following document describes the context of the EV Project, which partnered with city, regional and state governments, utilities, and other organizations in 16 cities to deploy about 14,000 Level 2 PEV chargers and 300 DC fast chargers. It also deployed 5,700 all-electric Nissan Leafs and 2,600 plug-in hybrid electric Chevrolet Volts. This research was conducted by Idaho National Laboratory.

  1. SNLA361ARRA.pdf

    National Nuclear Security Administration (NNSA)

  2. M195ARRA.pdf

    National Nuclear Security Administration (NNSA)

  3. reflecting-behavioral-processes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reflecting Behavioral Processes In Integrated Models Of Activity-Travel Demand And Dynamic Network Supply: A Novel Event-Based Framework Presentation at Argonne TRACC March 16, 2012 10:00 AM(CDT) TRACC Conference Room: Building 222, Room D-233 Dr. Karthik Charan Konduri School of Sustainable Energy and the Built Environment Arizona State University Abstract The developments in the microsimulation modeling of two key components of the transportation system, namely, activity-travel demand and

  4. Reflective optical imaging system

    DOE Patents [OSTI]

    Shafer, David R.

    2000-01-01

    An optical system compatible with short wavelength (extreme ultraviolet) radiation comprising four reflective elements for projecting a mask image onto a substrate. The four optical elements are characterized in order from object to image as convex, concave, convex and concave mirrors. The optical system is particularly suited for step and scan lithography methods. The invention increases the slit dimensions associated with ringfield scanning optics, improves wafer throughput and allows higher semiconductor device density.

  5. Renewable liquid reflecting zone plate

    DOE Patents [OSTI]

    Toor, Arthur; Ryutov, Dmitri D.

    2003-12-09

    A renewable liquid reflecting zone plate. Electrodes are operatively connected to a dielectric liquid in a circular or other arrangement to produce a reflecting zone plate. A system for renewing the liquid uses a penetrable substrate.

  6. CREST Cost of Renewable Energy Spreadsheet Tool: A Model for Developing Cost-Based Incentives in the United States; User Manual Version 4, August 2009 - March 2011 (Updated July 2013)

    SciTech Connect (OSTI)

    Gifford, J. S.; Grace, R. C.

    2013-07-01

    The objective of this document is to help model users understand how to use the CREST model to support renewable energy incentives, FITs, and other renewable energy rate-setting processes. This user manual will walk the reader through the spreadsheet tool, including its layout and conventions, offering context on how and why it was created. This user manual will also provide instructions on how to populate the model with inputs that are appropriate for a specific jurisdiction's policymaking objectives and context. Finally, the user manual will describe the results and outline how these results may inform decisions about long-term renewable energy support programs.

  7. Variable area light reflecting assembly

    DOE Patents [OSTI]

    Howard, T.C.

    1986-12-23

    Device is described for tracking daylight and projecting it into a building. The device tracks the sun and automatically adjusts both the orientation and area of the reflecting surface. The device may be mounted in either a wall or roof of a building. Additionally, multiple devices may be employed in a light shaft in a building, providing daylight to several different floors. The preferred embodiment employs a thin reflective film as the reflecting device. One edge of the reflective film is fixed, and the opposite end is attached to a spring-loaded take-up roller. As the sun moves across the sky, the take-up roller automatically adjusts the angle and surface area of the film. Additionally, louvers may be mounted at the light entrance to the device to reflect incoming daylight in an angle perpendicular to the device to provide maximum reflective capability when daylight enters the device at non-perpendicular angles. 9 figs.

  8. Variable area light reflecting assembly

    DOE Patents [OSTI]

    Howard, Thomas C.

    1986-01-01

    Device for tracking daylight and projecting it into a building. The device tracks the sun and automatically adjusts both the orientation and area of the reflecting surface. The device may be mounted in either a wall or roof of a building. Additionally, multiple devices may be employed in a light shaft in a building, providing daylight to several different floors. The preferred embodiment employs a thin reflective film as the reflecting device. One edge of the reflective film is fixed, and the opposite end is attached to a spring-loaded take-up roller. As the sun moves across the sky, the take-up roller automatically adjusts the angle and surface area of the film. Additionally, louvers may be mounted at the light entrance to the device to reflect incoming daylight in an angle perpendicular to the device to provide maximum reflective capability when daylight enters the device at non-perpendicular angles.

  9. Detailed Photovoltaic Analysis Simulation Spreadsheet

    Energy Science and Technology Software Center (OSTI)

    2008-12-31

    The software calculates photovoltaic system energy and financial performance via the utilization of very detailed parameters.

  10. Renewable Energy Cost Optimization Spreadsheet

    Energy Science and Technology Software Center (OSTI)

    2007-12-31

    The Software allow users to determine the optimum combination of renewable energy technologies to minimize life cycle cost for a facility by employing various algorithms which calculate initial and operating cost, energy delivery, and other attributes associated with each technology as a function of size.

  11. Reflection Survey | Open Energy Information

    Open Energy Info (EERE)

    (Gritto, Et Al.) Rye Patch Area Integrated Seismic Studies At The Rye Patch Geothermal Reservoir, Nevada Reflection Survey At Rye Patch Area (Laney, 2005) Rye Patch Area Federal...

  12. REFLECT HOME | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    so it made sense for the California State University, Sacramento, team to showcase nature in its Solar Decathlon 2015 project. The team's Reflect Home does just that by...

  13. Low reflectance radio frequency load

    DOE Patents [OSTI]

    Ives, R. Lawrence; Mizuhara, Yosuke M

    2014-04-01

    A load for traveling microwave energy has an absorptive volume defined by cylindrical body enclosed by a first end cap and a second end cap. The first end cap has an aperture for the passage of an input waveguide with a rotating part that is coupled to a reflective mirror. The inner surfaces of the absorptive volume consist of a resistive material or are coated with a coating which absorbs a fraction of incident RF energy, and the remainder of the RF energy reflects. The angle of the reflector and end caps is selected such that reflected RF energy dissipates an increasing percentage of the remaining RF energy at each reflection, and the reflected RF energy which returns to the rotating mirror is directed to the back surface of the rotating reflector, and is not coupled to the input waveguide. Additionally, the reflector may have a surface which generates a more uniform power distribution function axially and laterally, to increase the power handling capability of the RF load. The input waveguide may be corrugated for HE11 mode input energy.

  14. Reflective coherent spatial light modulator

    DOE Patents [OSTI]

    Simpson, John T.; Richards, Roger K.; Hutchinson, Donald P.; Simpson, Marcus L.

    2003-04-22

    A reflective coherent spatial light modulator (RCSLM) includes a subwavelength resonant grating structure (SWS), the SWS including at least one subwavelength resonant grating layer (SWL) have a plurality of areas defining a plurality of pixels. Each pixel represents an area capable of individual control of its reflective response. A structure for modulating the resonant reflective response of at least one pixel is provided. The structure for modulating can include at least one electro-optic layer in optical contact with the SWS. The RCSLM is scalable in both pixel size and wavelength. A method for forming a RCSLM includes the steps of selecting a waveguide material and forming a SWS in the waveguide material, the SWS formed from at least one SWL, the SWL having a plurality of areas defining a plurality of pixels.

  15. Reflected beam illumination microscopy using a microfluidics...

    Office of Scientific and Technical Information (OSTI)

    Reflected beam illumination microscopy using a microfluidics device - progress report 6152014. Citation Details In-Document Search Title: Reflected beam illumination microscopy ...

  16. AntiReflection Coating D

    SciTech Connect (OSTI)

    AIKEN,DANIEL J.

    1999-09-23

    Analytical expressions used to optimize AR coatings for single junction solar cells are extended for use in monolithic, series interconnected multi-junction solar cell AR coating design. The result is an analytical expression which relates the solar cell performance (through J{sub sc}) directly to the AR coating design through the device reflectance. It is also illustrated how AR coating design be used to provide an additional degree of freedom for current matching multi-junction devices.

  17. Cumulus Clouds and Reflected Sunlight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cumulus Clouds and Reflected Sunlight from Landsat ETM+ G. Wen and L. Oreopoulos National Aeronautics and Space Administration Goddard Space Flight Center University of Maryland Baltimore County Joint Center of Earth System Technology Greenbelt, Maryland R. F. Cahalan and S. C. Tsay National Aeronautics and Space Administration Goddard Space Flight Center Greenbelt, Maryland Introduction Cumulus clouds attenuate solar radiation casting shows on the ground. Cumulus clouds can also enhance solar

  18. Mirror: Visually reflecting C{sup ++}

    SciTech Connect (OSTI)

    Orosco, R.; Campo, M.; Sole, J.P.

    1995-12-31

    Reflection is the ability of a system to inspect and change a model of itself. This ability allows to transparently control and extend the functionality of an existing system without performing any changes to the system itself. In dynamic object-oriented languages like CLOS or Smalltalk. the reflective ability is supported directly by the language. In C++, in contrast, reflection must be provided by some form of code annotation and pre-processing. In most cases, this approach either requires modification of the system code, or just supports the reflection of entire classes but not the reflection of determined objects. This work presents the Mirror environment that supports C++ reflective programming through visual association of meta-classes to classes. It allows full transparent reflection of objects using three-dimensional presentations of the different architecture levels. The environment adds reflective ability to C++ classes without any code modification visible to the user, as well as dynamically selective reflection of objects.

  19. Discharge lamp with reflective jacket

    DOE Patents [OSTI]

    MacLennan, Donald A.; Turner, Brian P.; Kipling, Kent

    2001-01-01

    A discharge lamp includes an envelope, a fill which emits light when excited disposed in the envelope, a source of excitation power coupled to the fill to excite the fill and cause the fill to emit light, and a reflector disposed around the envelope and defining an opening, the reflector being configured to reflect some of the light emitted by the fill back into the fill while allowing some light to exit through the opening. The reflector may be made from a material having a similar thermal index of expansion as compared to the envelope and which is closely spaced to the envelope. The envelope material may be quartz and the reflector material may be either silica or alumina. The reflector may be formed as a jacket having a rigid structure which does not adhere to the envelope. The lamp may further include an optical clement spaced from the envelope and configured to reflect an unwanted component of light which exited the envelope back into the envelope through the opening in the reflector. Light which can be beneficially recaptured includes selected wavelength regions, a selected polarization, and selected angular components.

  20. AVTA: ARRA EV Project Annual Infrastructure Reports

    Office of Energy Efficiency and Renewable Energy (EERE)

    These reports summarize charging behavior of drivers that participated in the EV Project, which deployed 14,000 Level 2 PEV chargers and 300 fast chargers.

  1. ARRA521 Recovery Act - Project Daily Report

    Office of Environmental Management (EM)

    Valley Demonstration Project 62,875,000 61,790,821 61,790,821 0 Title X UraniumThorium Reimbursements 70,000,000 69,996,978 69,996,978 0 Management & Oversight ...

  2. Microsoft Word - ARRA Final Report Cover

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the date specified in the grant agreement. As part of the Office of Inspector General's strategy for reviewing the Department's implementation of the Recovery Act, we initiated...

  3. The ARRA EAP Energy Assurance Planning Bulletin

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plan State Legislative Action Smart Grid Info OE Website Guidance from NASEO Know Your ... All DOEOE grantees must confirm the names and contact information of individuals and ...

  4. 033009-ARRA_Program_Direction.pdf

    Office of Environmental Management (EM)

    TRANSPORTATION SAFEGUARDS DIVISION COURIER WORK SCHEDULES AND ESCORT VEHICLE REPLACEMENTS U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF AUDIT SERVICES DECEMBER 1998 WR-B-99-01 December 4, 1998 MEMORANDUM FOR THE MANAGER, ALBUQUERQUE OPERATIONS OFFICE FROM: Lawrence R. Ackerly Regional Manager, Western Regional Audit Office Office of Inspector General SUBJECT: INFORMATION : Audit Report on "Transportation Safeguards Division Courier Work Schedules and Escort Vehicle

  5. 070109-SG_Interoperability_Standards_ARRA.PDF

    Office of Environmental Management (EM)

    30 AUDIT REPORT PROJECT HANFORD MANAGEMENT CONTRACT COSTS AND PERFORMANCE U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF AUDIT SERVICES NOVEMBER 1998 November 5, 1998 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman Inspector General SUBJECT: INFORMATION : Audit Report on "The U.S. Department of Energy's Project Han- ford Management Contract Costs and Performance" BACKGROUND To offset the negative impact of downsizing its facilities, the Department of Energy

  6. The ARRA EAP Energy Assurance Planning Bulletin

    Broader source: Energy.gov (indexed) [DOE]

    Basics" Courses Smart Grid Customer Education Symposium National Town Meeting on Demand Response and Smart Grid Other Useful Information and Links PTI releases new documents ...

  7. Microsoft Word - ARRA Final Report Cover

    Broader source: Energy.gov (indexed) [DOE]

    According to project documentation, 3 million of the total cost will be dedicated to acquiring and installing a Performance Optimized Data Center (POD) at NETL's Morgantown, West ...

  8. Project_Descriptions_ITP_ARRA_Awards.xls

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Selections for Industrial Technologies Program Recovery Act Funding Deployment of Combined Heat and Power (CHP) Systems, District Energy Systems, Waste Energy Recovery Systems, and Efficient Industrial Equipment Award Winners City and State Project Description Total DOE Funding Air Products and Chemicals, Inc. Middletown, OH Waste Energy Project at the AK Steel Corporation Middletown Works. The project will construct a combined cycle power generation plant at the Middletown, OH, works of AK

  9. Microsoft Word - WIPP ARRA Final Report Cover

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Memorandum DATE: July 7, 2011 Audit Report Number: OAS-RA-L-11-09 REPLY TO ... TO: Manager, Carlsbad Field Office, Environmental Management INTRODUCTION AND OBJECTIVE ...

  10. ARRA Grid Modernization Investment Highlights - Fact Sheet |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    were successfully managed by the Office of Electricity Delivery and Energy Reliability. ... Smart Grid Investments Improve Grid Reliability, Resilience, and Storm Responses (November ...

  11. The ARRA EAP Energy Assurance Planning Bulletin

    Office of Environmental Management (EM)

    the recently completed Electricity Subsector Cybersecurity Capability Maturity Model. ... Richard Reed, Vice President of Preparedness and Resilience Strategy for the American Red ...

  12. The ARRA EAP Energy Assurance Planning Bulletin

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Other Useful Information and Links The Public Technology Institute (PTI) has published a series of new educational documents - and has offered related webinars - in support of ...

  13. The ARRA EAP Energy Assurance Planning Bulletin

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2, 2012 THE AMERICAN RECOVERY AND REINVESTMENT ACT VOLUME 3, NUMBER 2 Need to Know DOE/OE National Energy Assurance Conference Action Items DOE Requests Sharing of State EA Plans Exercise and Reporting Deadlines Energy Assurance Success Stories West Virginia News from the States California is Top Renewable State Upcoming Events NMU "The Basics" Courses Smart Grid Customer Education Symposium National Town Meeting on Demand Response and Smart Grid Other Useful Information and Links PTI

  14. The ARRA EAP Energy Assurance Planning Bulletin

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3, 2012 THE AMERICAN RECOVERY AND REINVESTMENT ACT VOLUME 3, NUMBER 1 Need to Know DOE/OE National-Level Energy Assurance Conference Action Items DOE to Request Sharing of State EA Plans Exercise and Reporting Deadlines News from the States Texas Home Weatherization Program is a Success Energy Assurance Success Stories Western Regional Energy Assurance Exercise Recap Other Useful Information and Links Introduction to Energy Infrastructure Interdependencies Cyber Security Concerns for LEAP

  15. AVTA: ARRA EV Project Overview Reports

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following reports provide summary overviews of the EV Project, which partnered with city, regional and state governments, utilities, and other organizations in 16 cities to deploy about 14,000 Level 2 PEV chargers and 300 DC fast chargers. It also deployed 5,700 all-electric Nissan Leafs and 2,600 plug-in hybrid electric Chevrolet Volts. Background data on how this data was collected is in the EV Project: About the Reports. This research was conducted by Idaho National Laboratory.

  16. Synchrophasor Technology Advancement in ARRA Projects: Final...

    Broader source: Energy.gov (indexed) [DOE]

    ... Connecting PMUs that are strategically located across the power grid with high-speed ... improve the grid's efficiency, and prevent or more quickly recover from outages. ...

  17. ARRA Project Info Combined 0112110.xls

    Broader source: Energy.gov (indexed) [DOE]

    Organization Location (State) Description Partners National Alliance for Advanced Biofuels and Bioproducts (NAABB) Led by the Donald Danforth Plant Science Center 44,036,473...

  18. The ARRA EAP Energy Assurance Planning Bulletin

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    JULY 9, 2012 THE AMERICAN RECOVERY AND REINVESTMENT ACT VOLUME 3, NUMBER 3 Need to Know DOE/OE National Energy Assurance Conference Action Items Final Energy Assurance Plans and Reporting Deadlines News from the States California Approves Energy Efficiency Standards Energy Assurance Success Stories Heber Light & Power Takes Lead on Local EA Planning Upcoming Events NASEO/NARUC Environmental Protection & Clean, Reliable Energy Conference "Camp NARUC" GFIRST 2012 Conference

  19. The ARRA EAP Energy Assurance Planning Bulletin

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4, 2010 THE AMERICAN RECOVERY AND REINVESTMENT ACT VOLUME 1, NUMBER 1 Need to Know State Energy Assurance Guidelines Version 3.1 Action Items Update Contacts Recovery Act Report Quarterly Report Training Training Opportunities Upcoming Events February 2010 National Electricity Forum April 2010 Summer Energy Outlook and Energy Data Workshop Other Useful Links and Information Smart Grid Award Recipients DHS Crafts Cyber Preparedness Plan State Legislative Action Smart Grid Info OE Website Guidance

  20. The ARRA EAP Energy Assurance Planning Bulletin

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1, 2010 THE AMERICAN RECOVERY AND REINVESTMENT ACT VOLUME 1, NUMBER 2 Need to Know LEAP Grant Award Recipients Action Items Recovery Act Report Quarterly Report Plan Updates Contact Updates Upcoming Events April 2010 Energy Conference April 2010 Summer Energy Outlook and Energy Data Workshop Training GIS Webinar NASEO Conf. Calls Other Useful Links and Information FEMA's Lessons Learned Website NIST's Cyber Standards News from the States S.D. Ethanol Bill Energy Conference Locality Notes CARRI

  1. Microsoft Word - ARRA Final Report Cover_1

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Geothermal Technologies Program under the American Recovery and Reinvestment Act OAS-RA-11-05 March 2011 Department of Energy Washington, DC 20585 March 22, 2011 MEMORANDUM FOR THE UNDER SECRETARY OF ENERGY FROM: Gregory H. Friedman Inspector General SUBJECT: INFORMATION: Audit Report on "The Department of Energy's Geothermal Technologies Program under the American Recovery and Reinvestment Act" BACKGROUND Under the American Recovery and Reinvestment Act of 2009 (Recovery Act), the

  2. AVTA: ARRA EV Project Vehicle Placement Maps

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following maps describe where the EV Project deployed 5,700 all-electric Nissan Leafs and 2,600 plug-in hybrid electric Chevrolet Volts. Background data on how this data was collected is in the EV Project: About the Reports. This research was conducted by Idaho National Laboratory.

  3. Y-12M221ARRA.pdf

    National Nuclear Security Administration (NNSA)

  4. Oregon Recovery Act State Memo | Department of Energy

    Energy Savers [EERE]

    The American Recovery & Reinvestment Act (ARRA) is making a meaningful down payment on the nation's energy and environmental future. The Recovery Act investments in Oregon reflect ...

  5. Condenser optic with sacrificial reflective surface

    DOE Patents [OSTI]

    Tichenor, Daniel A.; Kubiak, Glenn D.; Lee, Sung Hun

    2007-07-03

    Employing collector optics that has a sacrificial reflective surface can significantly prolong the useful life of the collector optics and the overall performance of the condenser in which the collector optics are incorporated. The collector optics is normally subject to erosion by debris from laser plasma source of radiation. The presence of an upper sacrificial reflective surface over the underlying reflective surface effectively increases the life of the optics while relaxing the constraints on the radiation source. Spatial and temporally varying reflectivity that results from the use of the sacrificial reflective surface can be accommodated by proper condenser design.

  6. Condenser optic with sacrificial reflective surface

    DOE Patents [OSTI]

    Tichenor, Daniel A.; Kubiak, Glenn D.; Lee, Sang Hun

    2006-07-25

    Employing collector optics that have a sacrificial reflective surface can significantly prolong the useful life of the collector optics and the overall performance of the condenser in which the collector optics are incorporated. The collector optics are normally subject to erosion by debris from laser plasma source of radiation. The presence of an upper sacrificial reflective surface over the underlying reflective surface effectively increases the life of the optics while relaxing the constraints on the radiation source. Spatial and temporally varying reflectivity that results from the use of the sacrificial reflective surface can be accommodated by proper condenser design.

  7. Photovoltaic module with light reflecting backskin

    DOE Patents [OSTI]

    Gonsiorawski, Ronald C.

    2007-07-03

    A photovoltaic module comprises electrically interconnected and mutually spaced photovoltaic cells that are encapsulated by a light-transmitting encapsulant between a light-transparent front cover and a back cover, with the back cover sheet being an ionomer/nylon alloy embossed with V-shaped grooves running in at least two directions and coated with a light reflecting medium so as to provide light-reflecting facets that are aligned with the spaces between adjacent cells and oriented so as to reflect light falling in those spaces back toward said transparent front cover for further internal reflection onto the solar cells, whereby substantially all of the reflected light will be internally reflected from said cover sheet back to the photovoltaic cells, thereby increasing the current output of the module. The internal reflector improves power output by as much as 67%.

  8. Reflected beam illumination microscopy using a microfluidics...

    Office of Scientific and Technical Information (OSTI)

    using a microfluidics device - progress report 6152014. Citation Details In-Document Search Title: Reflected beam illumination microscopy using a microfluidics device - ...

  9. Identification coding schemes for modulated reflectance systems

    DOE Patents [OSTI]

    Coates, Don M.; Briles, Scott D.; Neagley, Daniel L.; Platts, David; Clark, David D.

    2006-08-22

    An identifying coding apparatus employing modulated reflectance technology involving a base station emitting a RF signal, with a tag, located remotely from the base station, and containing at least one antenna and predetermined other passive circuit components, receiving the RF signal and reflecting back to the base station a modulated signal indicative of characteristics related to the tag.

  10. Particle reflection and TFTR neutral beam diagnostics

    SciTech Connect (OSTI)

    Kamperschroer, J.H.; Grisham, L.R.; Kugel, H.W.; O`Connor, T.E.; Newman, R.A.; Stevenson, T.N.; von Halle, A.; Williams, M.D.

    1992-04-01

    Determination of two critical neutral beam parameters, power and divergence, are affected by the reflection of a fraction of the incident energy from the surface of the measuring calorimeter. On the TFTR Neutral Beam Test Stand, greater than 30% of the incident power directed at the target chamber calorimeter was unaccounted for. Most of this loss is believed due to reflection from the surface of the flat calorimeter, which was struck at a near grazing incidence (12{degrees}). Beamline calorimeters, of a ``V``-shape design, while retaining the beam power, also suffer from reflection effects. Reflection, in this latter case, artificially peaks the power toward the apex of the ``V``, complicating the fitting technique, and increasing the power density on axis by 10 to 20%; an effect of import to future beamline designers. Agreement is found between measured and expected divergence values, even with 24% of the incident energy reflected.

  11. Particle reflection and TFTR neutral beam diagnostics

    SciTech Connect (OSTI)

    Kamperschroer, J.H.; Grisham, L.R.; Kugel, H.W.; O'Connor, T.E.; Newman, R.A.; Stevenson, T.N.; von Halle, A.; Williams, M.D.

    1992-04-01

    Determination of two critical neutral beam parameters, power and divergence, are affected by the reflection of a fraction of the incident energy from the surface of the measuring calorimeter. On the TFTR Neutral Beam Test Stand, greater than 30% of the incident power directed at the target chamber calorimeter was unaccounted for. Most of this loss is believed due to reflection from the surface of the flat calorimeter, which was struck at a near grazing incidence (12{degrees}). Beamline calorimeters, of a V''-shape design, while retaining the beam power, also suffer from reflection effects. Reflection, in this latter case, artificially peaks the power toward the apex of the V'', complicating the fitting technique, and increasing the power density on axis by 10 to 20%; an effect of import to future beamline designers. Agreement is found between measured and expected divergence values, even with 24% of the incident energy reflected.

  12. Surface reflectance degradation by microbial communities

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cheng, Meng -Dawn; Allman, Steve L.; Graham, David E.; Cheng, Karen R.; Pfiffner, Susan Marie; Vishnivetskaya, Tatiana A.; Desjarlais, Andre Omer

    2015-11-05

    Building envelope, such as a roof, is the interface between a building structure and the environment. Understanding of the physics of microbial interactions with the building envelope is limited. In addition to the natural weathering, microorganisms and airborne particulate matter that attach to a cool roof tend to reduce the roof reflectance over time, compromising the energy efficiency advantages of the reflective coating designs. We applied microbial ecology analysis to identify the natural communities present on the exposed coatings and investigated the reduction kinetics of the surface reflectance upon the introduction of a defined mixture of both photoautotrophic and heterotrophicmore » microorganisms representing the natural communities. The result are (1) reflectance degradation by microbial communities follows a first-order kinetic relationship and (2) more than 50% of degradation from the initial reflectance value can be caused by microbial species alone in much less time than 3 years required by the current standard ENERGY STAR® test methods.« less

  13. Surface reflectance degradation by microbial communities

    SciTech Connect (OSTI)

    Cheng, Meng -Dawn; Allman, Steve L.; Graham, David E.; Cheng, Karen R.; Pfiffner, Susan Marie; Vishnivetskaya, Tatiana A.; Desjarlais, Andre Omer

    2015-11-05

    Building envelope, such as a roof, is the interface between a building structure and the environment. Understanding of the physics of microbial interactions with the building envelope is limited. In addition to the natural weathering, microorganisms and airborne particulate matter that attach to a cool roof tend to reduce the roof reflectance over time, compromising the energy efficiency advantages of the reflective coating designs. We applied microbial ecology analysis to identify the natural communities present on the exposed coatings and investigated the reduction kinetics of the surface reflectance upon the introduction of a defined mixture of both photoautotrophic and heterotrophic microorganisms representing the natural communities. The result are (1) reflectance degradation by microbial communities follows a first-order kinetic relationship and (2) more than 50% of degradation from the initial reflectance value can be caused by microbial species alone in much less time than 3 years required by the current standard ENERGY STAR® test methods.

  14. Project Cost Profile Spreadsheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    prior to Critical Decision (CD) 2, and a ConstructionExecution Readiness EIR for all Major System projects prior to ... Statement of Work (SOW) Template (Combined EIRICE Support ...

  15. START Alaska Historical Energy Usage Spreadsheet

    Broader source: Energy.gov [DOE]

    Communities applying for the DOE Office of Indian Energy Strategic Technical Assistance Response Team (START) Initiative for Community Energy Planning and Projects Round Two are asked to download...

  16. Use and Misuse of Chemical Reactivity Spreadsheets

    SciTech Connect (OSTI)

    Simmons, F

    2005-09-20

    Misidentifying chemical hazards can have serious deleterious effects. Consequences of not identifying a chemical are obvious and include fires, explosions, injury to workers, etc. Consequences of identifying hazards that are really not present can be equally as bad. Misidentifying hazards can result in increased work with loss of productivity, increased expenses, utilization/consumption of scarce resources, and the potential to modify the work to include chemicals or processes that are actually more hazardous than those originally proposed. For these reasons, accurate hazard identification is critical to any safety program. Hazard identification in the world of chemistry is, at best, a daunting task. The knowing or understanding, of the reactions between any of approximately twelve million known chemicals that may be hazardous, is the reason for this task being so arduous. Other variables, such as adding other reactants/contaminants or changing conditions (e.g., temperature, pressure, or concentration), make hazard determination something many would construe as being more than impossibly difficult. Despite these complexities, people who do not have an extensive background in the chemical sciences can be called upon to perform chemical hazard identification. Because hazard identification in the area of chemical safety is so burdensome and because people with a wide variety of training are called upon to perform this work, tools are required to aid in chemical hazard identification. Many tools have been developed. Unfortunately, many of these tools are not seen as the limited resource that they are and are used inappropriately.

  17. Glue Film Thickness Measurements by Spectral Reflectance

    SciTech Connect (OSTI)

    B. R. Marshall

    2010-09-20

    Spectral reflectance was used to determine the thickness of thin glue layers in a study of the effect of the glue on radiance and reflectance measurements of shocked-tin substrates attached to lithium fluoride windows. Measurements based on profilometry of the components were found to be inaccurate due to flatness variations and deformation of the tin substrate under pressure during the gluing process. The accuracy of the spectral reflectance measurements were estimated to be ±0.5 μm, which was sufficient to demonstrate a convincing correlation between glue thickness and shock-generated light.

  18. Microsoft Word - Rapid Reflective Facet Characterization Using...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    losing power that misses the target, or increasing peak fluxes to undesirable levels. ... is positioned so that it views the reflection of an active target, such as an LCD screen. ...

  19. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light ... wavelengths relevant to atomic and molecular phenomena) with the advantages of ...

  20. Preparing reflective substrate surfaces for laser treatment

    DOE Patents [OSTI]

    Flick, F.F.

    1984-11-21

    A coating of either copper oxide or felt tip pen ink is used on reflective copper or gold substrates to enhance laser beam coupling when the substrates are cut or welded with a laser.

  1. Frustrated total internal reflection acoustic field sensor

    DOE Patents [OSTI]

    Kallman, Jeffrey S.

    2000-01-01

    A frustrated total internal reflection acoustic field sensor which allows the acquisition of the acoustic field over an entire plane, all at once. The sensor finds use in acoustic holography and acoustic diffraction tomography. For example, the sensor may be produced by a transparent plate with transparent support members tall enough to support one or more flexible membranes at an appropriate height for frustrated total internal reflection to occur. An acoustic wave causes the membrane to deflect away from its quiescent position and thus changes the amount of light that tunnels through the gap formed by the support members and into the membrane, and so changes the amount of light reflected by the membrane. The sensor(s) is illuminated by a uniform tight field, and the reflection from the sensor yields acoustic wave amplitude and phase information which can be picked up electronically or otherwise.

  2. Bidirectional reflection functions from surface bump maps

    SciTech Connect (OSTI)

    Cabral, B.; Max, N.; Springmeyer, R.

    1987-04-29

    The Torrance-Sparrow model for calculating bidirectional reflection functions contains a geometrical attenuation factor to account for shadowing and occlusions in a hypothetical distribution of grooves on a rough surface. Using an efficient table-based method for determining the shadows and occlusions, we calculate the geometric attenuation factor for surfaces defined by a specific table of bump heights. Diffuse and glossy specular reflection of the environment can be handled in a unified manner by using an integral of the bidirectional reflection function times the environmental illumination, over the hemisphere of solid angle above a surface. We present a method of estimating the integral, by expanding the bidirectional reflection coefficient in spherical harmonics, and show how the coefficients in this expansion can be determined efficiently by reorganizing our geometric attenuation calculation.

  3. Lamp method and apparatus using multiple reflections

    DOE Patents [OSTI]

    MacLennan, Donald A.; Turner, Brian; Kipling, Kent

    1999-01-01

    A method wherein the light in a sulfur or selenium lamp is reflected through the fill a multiplicity of times to convert ultraviolet radiation to visible. A light emitting device comprised of an electrodeless envelope which bears a light reflecting covering around a first portion which does not crack due to differential thermal expansion and which has a second portion which comprises a light transmissive aperture.

  4. Lamp method and apparatus using multiple reflections

    DOE Patents [OSTI]

    MacLennan, D.A.; Turner, B.; Kipling, K.

    1999-05-11

    A method wherein the light in a sulfur or selenium lamp is reflected through the fill a multiplicity of times to convert ultraviolet radiation to visible is disclosed. A light emitting device comprised of an electrodeless envelope which bears a light reflecting covering around a first portion which does not crack due to differential thermal expansion and which has a second portion which comprises a light transmissive aperture. 20 figs.

  5. Origin of deep crustal reflections: Implications of coincident seismic refraction and reflection data in Nevada

    SciTech Connect (OSTI)

    Holbrook, W.S. (Woods Hole Oceanographic Institution, MA (USA)); Catchings, R.D. (U.S. Geological Survey, Menlo Park, CA (USA)); Jarchow, C.M. (Stanford Univ., CA (USA))

    1991-02-01

    The authors compare seismic refraction and reflection results along the PASSCAL/COCORP 40{degree}N transect in the northern Basin and Range of Nevada in order to determine the origin of the prominent reflections from the deep crystalline crust. Reflection data along the transect show a thick zone of discontinuous, subhorizontal reflections, beginning at 4-6 s two-way traveltime (10-20 km depth) and ending at 9-11 s (27-35 km). Two independently derived velocity models, based on refraction data, are largely similar and agree on many important aspects of the reflectivity-velocity relation. Both models show that the top of the reflective zone lies 3-8 km above a prominent mid-crustal velocity discontinuity, which is interpreted to separate bulk silicic from bulk dioritic-gabbroic crust; in most places, the silicic mid-crust is more strongly reflective than the mafic lower crust. This pattern is expected in areas where ductile shearing is the mechanism responsible for the reflectivity. One of the velocity models, however, suggests that, in places, the strongest reflectivity spans both the middle (6.1-6.3 km/s) and lower (6.6 km/s) crust; this pattern suggests that the combined influence of ductile strain fabrics and mafic intrusions gives rise to crustal reflections. Both models show that the lowermost crust and crust/mantle transition are highly reflective, also suggesting the presence of mafic and/or ultramafic intrusions. Thus the observed reflection patterns suggest that ductile shearing and the intrusion of mantle-derived magma - both of which are likely to have accompanied the extreme Cenozoic extension - are important factors in generating deep crustal reflections.

  6. High reflectance-low stress Mo-Si multilayer reflective coatings

    DOE Patents [OSTI]

    Montcalm, Claude; Mirkarimi, Paul B.

    2000-01-01

    A high reflectance-low stress Mo-Si multilayer reflective coating particularly useful for the extreme ultraviolet (EUV) wavelength region. While the multilayer reflective coating has particular application for EUV lithography, it has numerous other applications where high reflectance and low stress multilayer coatings are utilized. Multilayer coatings having high near-normal incidence reflectance (R.gtoreq.65%) and low residual stress (.ltoreq.100 MPa) have been produced using thermal and non-thermal approaches. The thermal approach involves heating the multilayer coating to a given temperature for a given time after deposition in order to induce structural changes in the multilayer coating that will have an overall "relaxation" effect without reducing the reflectance significantly.

  7. Process for fabricating high reflectance-low stress Mo--Si multilayer reflective coatings

    DOE Patents [OSTI]

    Montcalm, Claude; Mirkarimi, Paul B.

    2001-01-01

    A high reflectance-low stress Mo--Si multilayer reflective coating particularly useful for the extreme ultraviolet (EUV) wavelength region. While the multilayer reflective coating has particular application for EUV lithography, it has numerous other applications where high reflectance and low stress multilayer coatings are utilized. Multilayer coatings having high near-normal incidence reflectance (R.gtoreq.65%) and low residual stress (.ltoreq.100 MPa) have been produced using thermal and non-thermal approaches. The thermal approach involves heating the multilayer coating to a given temperature for a given time after deposition in order to induce structural changes in the multilayer coating that will have an overall "relaxation" effect without reducing the reflectance significantly.

  8. REFLECT: A computer program for the x-ray reflectivity of bent perfect crystals

    SciTech Connect (OSTI)

    Etelaeniemi, V.; Suortti, P.; Thomlinson, W. . Dept. of Physics; Brookhaven National Lab., Upton, NY )

    1989-09-01

    The design of monochromators for x-ray applications, using either standard laboratory sources on synchrotron radiation sources, requires a knowledge of the reflectivity of the crystals. The reflectivity depends on the crystals used, the geometry of the reflection, the energy range of the radiation, and, in the present case, the cylindrical bending radius of the optical device. This report is intended to allow the reader to become familiar with, and therefore use, a computer program called REFLECT which we have used in the design of a dual beam Laue monochromator for synchrotron angiography. The results of REFLECT have been compared to measured reflectivities for both bent Bragg and Laue geometries. The results are excellent and should give full confidence in the use of the program. 6 refs.

  9. Low reflectance high power RF load

    DOE Patents [OSTI]

    Ives, R. Lawrence; Mizuhara, Yosuke M.

    2016-02-02

    A load for traveling microwave energy has an absorptive volume defined by cylindrical body enclosed by a first end cap and a second end cap. The first end cap has an aperture for the passage of an input waveguide with a rotating part that is coupled to a reflective mirror. The inner surfaces of the absorptive volume consist of a resistive material or are coated with a coating which absorbs a fraction of incident RF energy, and the remainder of the RF energy reflects. The angle of the reflector and end caps is selected such that reflected RF energy dissipates an increasing percentage of the remaining RF energy at each reflection, and the reflected RF energy which returns to the rotating mirror is directed to the back surface of the rotating reflector, and is not coupled to the input waveguide. Additionally, the reflector may have a surface which generates a more uniform power distribution function axially and laterally, to increase the power handling capability of the RF load. The input waveguide may be corrugated for HE11 mode input energy.

  10. Pigments which reflect infrared radiation from fire

    DOE Patents [OSTI]

    Berdahl, Paul H.

    1998-01-01

    Conventional paints transmit or absorb most of the intense infrared (IR) radiation emitted by fire, causing them to contribute to the spread of fire. The present invention comprises a fire retardant paint additive that reflects the thermal IR radiation emitted by fire in the 1 to 20 micrometer (.mu.m) wavelength range. The important spectral ranges for fire control are typically about 1 to about 8 .mu.m or, for cool smoky fires, about 2 .mu.m to about 16 .mu.m. The improved inventive coatings reflect adverse electromagnetic energy and slow the spread of fire. Specific IR reflective pigments include titanium dioxide (rutile) and red iron oxide pigments with diameters of about 1 .mu.m to about 2 .mu.m and thin leafing aluminum flake pigments.

  11. Pigments which reflect infrared radiation from fire

    DOE Patents [OSTI]

    Berdahl, P.H.

    1998-09-22

    Conventional paints transmit or absorb most of the intense infrared (IR) radiation emitted by fire, causing them to contribute to the spread of fire. The present invention comprises a fire retardant paint additive that reflects the thermal IR radiation emitted by fire in the 1 to 20 micrometer ({micro}m) wavelength range. The important spectral ranges for fire control are typically about 1 to about 8 {micro}m or, for cool smoky fires, about 2 {micro}m to about 16 {micro}m. The improved inventive coatings reflect adverse electromagnetic energy and slow the spread of fire. Specific IR reflective pigments include titanium dioxide (rutile) and red iron oxide pigments with diameters of about 1 {micro}m to about 2 {micro}m and thin leafing aluminum flake pigments. 4 figs.

  12. Method of making reflecting film reflector

    DOE Patents [OSTI]

    Cottingham, James G.

    1980-01-01

    A reflector of the reflecting film type is disclosed and which may be used in a heliostatic system for concentrating solar energy and comprising a reflecting film bonded to an appropriate rigid substrate in such a way that specularity of a very high order is achieved. A method of bonding the reflecting film to the substrate is also disclosed and comprises the steps of initially adhering the film to a smooth, clean flat rigid surface with a non-bonding liquid between the rigid surface and film, and then bonding the substrate and film. The non-bonding liquid has a molecular adhesion greater than any stresses due to handling or curing of the bonding agent which is applied between the film and the opposing surface of the rigid substrate.

  13. Reflection technique for thermal mapping of semiconductors

    DOE Patents [OSTI]

    Walter, Martin J.

    1989-06-20

    Semiconductors may be optically tested for their temperatures by illuminating them with tunable monochromatic electromagnetic radiation and observing the light reflected off of them. A transition point will occur when the wavelength of the light corresponds with the actual band gap energy of the semiconductor. At the transition point, the image of the semiconductor will appreciably darken as the light is transmitted through it, rather than being reflected off of it. The wavelength of the light at the transition point corresponds to the actual band gap energy and the actual temperature of the semiconductor.

  14. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lensless X-Ray Imaging in Reflection Lensless X-Ray Imaging in Reflection Print Wednesday, 26 October 2011 00:00 The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are

  15. Bidirectional reflectivity of mirrors in solar power plants

    SciTech Connect (OSTI)

    Khrustalyov, B.A.; Ragimov, R.K.

    1991-01-01

    In this paper a technique for measuring the bidirectional reflectivity of mirrors is presented. An experimental setup is described which allows one to measure the reflecting characteristics at small angles of scattering. These reflectivities are approximated by an exponential relation.

  16. Prisms with total internal reflection as solar reflectors

    DOE Patents [OSTI]

    Rabl, Arnulf; Rabl, Veronika

    1978-01-01

    An improved reflective wall for radiant energy collection and concentration devices is provided. The wall is comprised of a plurality of prisms whose frontal faces are adjacent and which reflect the desired radiation by total internal reflection.

  17. Total internal reflection laser tools and methods

    DOE Patents [OSTI]

    Zediker, Mark S.; Faircloth, Brian O.; Kolachalam, Sharath K.; Grubb, Daryl L.

    2016-02-02

    There is provided high power laser tools and laser heads that utilize total internal reflection ("TIR") structures to direct the laser beam along a laser beam path within the TIR structure. The TIR structures may be a TIR prism having its hypotenuse as a TIR surface.

  18. Multi-reflective acoustic wave device

    DOE Patents [OSTI]

    Andle, Jeffrey C.

    2006-02-21

    An acoustic wave device, which utilizes multiple localized reflections of acoustic wave for achieving an infinite impulse response while maintaining high tolerance for dampening effects, is disclosed. The device utilized a plurality of electromechanically significant electrodes disposed on most of the active surface. A plurality of sensors utilizing the disclosed acoustic wave mode device are also described.

  19. Electrochromic window with high reflectivity modulation

    DOE Patents [OSTI]

    Goldner, Ronald B.; Gerouki, Alexandra; Liu, Te-Yang; Goldner, Mark A.; Haas, Terry E.

    2000-01-01

    A multi-layered, active, thin film, solid-state electrochromic device having a high reflectivity in the near infrared in a colored state, a high reflectivity and transmissivity modulation when switching between colored and bleached states, a low absorptivity in the near infrared, and fast switching times, and methods for its manufacture and switching are provided. In one embodiment, a multi-layered device comprising a first indium tin oxide transparent electronic conductor, a transparent ion blocking layer, a tungsten oxide electrochromic anode, a lithium ion conducting-electrically resistive electrolyte, a complimentary lithium mixed metal oxide electrochromic cathode, a transparent ohmic contact layer, a second indium oxide transparent electronic conductor, and a silicon nitride encapsulant is provided. Through elimination of optional intermediate layers, simplified device designs are provided as alternative embodiments. Typical colored-state reflectivity of the multi-layered device is greater than 50% in the near infrared, bleached-state reflectivity is less than 40% in the visible, bleached-state transmissivity is greater than 60% in the near infrared and greater than 40% in the visible, and spectral absorbance is less than 50% in the range from 0.65-2.5 .mu.m.

  20. Heat reflecting tape for thermoelectric converter

    DOE Patents [OSTI]

    Purdy, David L.

    1977-01-01

    Threads are interlaced with thermoelectric wires to provide a woven cloth in tape form, there being an intermediate layer of heat radiation reflecting material (e.g., aluminum foil) insulated electrically from said wires, which are of opposite thermoelectric polarity and connected as a plurality of thermocouples.

  1. Sandia Energy - Improved Method to Measure Glare and Reflected...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and more accurate method of measuring the irradiance from solar reflections using a digital camera. Measurements of reflected solar irradiance is of great importance to...

  2. Integrated X-Ray Reflectivity Measurements for Elliptically Curved...

    Office of Scientific and Technical Information (OSTI)

    Integrated X-Ray Reflectivity Measurements for Elliptically Curved PET Crystals Citation Details In-Document Search Title: Integrated X-Ray Reflectivity Measurements for ...

  3. Procedure for measuring the solar reflectance of flat or curved...

    Office of Scientific and Technical Information (OSTI)

    Procedure for measuring the solar reflectance of flat or curved roofing assemblies Citation Details In-Document Search Title: Procedure for measuring the solar reflectance of flat ...

  4. Measuring solar reflectance Part II: Review of practical methods...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Measuring solar reflectance Part II: Review of ... A companion article explored how solar reflectance varies with surface orientation and ...

  5. Characterization of background reflectivity for MEDUSA

    SciTech Connect (OSTI)

    Oldenborg, R. C.; Tiee, J. J.; Foy, B. R.; Petrin, R. R.; Wilson, C. W.

    2003-01-01

    The DARPA MEDUSA program goal is to detect, locate, and identify electro-optical threats in the vicinity of a moving platform. Laser sensing will be employed to find these threats by looking for anomalous reflections from threat sensors. However, the reflectivity variability (clutter) in both natural and manmade backgrounds will inherently limit target detection levels. In parallel with advanced component development by several aerospace contractors, a study of this clutter limitation was initiated in the long-wave (LW) and midwave (MW) infrared spectral regions to properly drive system design parameters. The analysis of clutter and associated limits on detection has been a major component of LANL efforts in laser remote sensing for non-proliferation. LANL is now analyzing existing data and conducting additional selected measurements in both the LWIR (9 and 10.6 pm) and MWIR (4.6 pm) in support of the DARPA program to increase our understanding of these clutter limitations and, thereby aid in the design and development of the MEDUSA system. The status of the LANL effort will be discussed. A variety of different natural and manmade target types have been investigated. Target scenes range from relatively low clutter sites typical of a southwestern desert to higher clutter downtown urban sites. Images are created by conducting raster scans across a scene interest. These images are then analyzed using data clustering techniques (e g K-means) to identify regions within the scene that contain similar reflectivity profiles. Data will be presented illustrating the reflectivity variability among different samples of the same target type, Le. within the same cluster, and among different data clusters. In general, it is found that the variability of reflectivities among similar targets is well represented by a log-normal distribution. Furthermore, manmade target tend to have higher reflectivities and more variability than natural targets. The implications of this observation

  6. Catheter based mid-infrared reflectance and reflectance generated absorption spectroscopy

    DOE Patents [OSTI]

    Holman, Hoi-Ying N

    2013-10-29

    A method of characterizing conditions in a tissue, by (a) providing a catheter that has a light source that emits light in selected wavenumbers within the range of mid-IR spectrum; (b) directing the light from the catheter to an area of tissue at a location inside a blood vessel of a subject; (c) collecting light reflected from the location and generating a reflectance spectra; and (d) comparing the reflectance spectra to a reference spectra of normal tissue, whereby a location having an increased number of absorbance peaks at said selected wavenumbers indicates a tissue inside the blood vessel containing a physiological marker for atherosclerosis.

  7. Method for producing highly reflective metal surfaces

    DOE Patents [OSTI]

    Arnold, J.B.; Steger, P.J.; Wright, R.R.

    1982-03-04

    The invention is a novel method for producing mirror surfaces which are extremely smooth and which have high optical reflectivity. The method includes depositing, by electrolysis, an amorphous layer of nickel on an article and then diamond-machining the resulting nickel surface to increase its smoothness and reflectivity. The machined nickel surface then is passivated with respect to the formation of bonds with electrodeposited nickel. Nickel then is electrodeposited on the passivated surface to form a layer of electroplated nickel whose inside surface is a replica of the passivated surface. The mandrel then may be-re-passivated and provided with a layer of electrodeposited nickel, which is then recovered from the mandrel providing a second replica. The mandrel can be so re-used to provide many such replicas. As compared with producing each mirror-finished article by plating and diamond-machining, the new method is faster and less expensive.

  8. Compact reflective imaging spectrometer utilizing immersed gratings

    DOE Patents [OSTI]

    Chrisp, Michael P. (Danville, CA)

    2006-05-09

    A compact imaging spectrometer comprising an entrance slit for directing light, a first mirror that receives said light and reflects said light, an immersive diffraction grating that diffracts said light, a second mirror that focuses said light, and a detector array that receives said focused light. The compact imaging spectrometer can be utilized for remote sensing imaging spectrometers where size and weight are of primary importance.

  9. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lensless X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are important for coherent x-ray diffraction imaging-lensless imaging

  10. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lensless X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are important for coherent x-ray diffraction imaging-lensless imaging

  11. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lensless X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are important for coherent x-ray diffraction imaging-lensless imaging

  12. Reflective optical imaging method and circuit

    DOE Patents [OSTI]

    Shafer, David R.

    2001-01-01

    An optical system compatible with short wavelength (extreme ultraviolet) radiation comprising four reflective elements for projecting a mask image onto a substrate. The four optical elements are characterized in order from object to image as convex, concave, convex and concave mirrors. The optical system is particularly suited for step and scan lithography methods. The invention increases the slit dimensions associated with ringfield scanning optics, improves wafer throughput and allows higher semiconductor device density.

  13. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lensless X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are important for coherent x-ray diffraction imaging-lensless imaging

  14. Multiple-reflection optical gas cell

    DOE Patents [OSTI]

    Matthews, Thomas G.

    1983-01-01

    A multiple-reflection optical cell for Raman or fluorescence gas analysis consists of two spherical mirrors positioned transverse to a multiple-pass laser cell in a confronting plane-parallel alignment. The two mirrors are of equal diameter but possess different radii of curvature. The spacing between the mirrors is uniform and less than half of the radius of curvature of either mirror. The mirror of greater curvature possesses a small circular portal in its center which is the effective point source for conventional F1 double lens collection optics of a monochromator-detection system. Gas to be analyzed is flowed into the cell and irradiated by a multiply-reflected composite laser beam centered between the mirrors of the cell. Raman or fluorescence radiation originating from a large volume within the cell is (1) collected via multiple reflections with the cell mirrors, (2) partially collimated and (3) directed through the cell portal in a geometric array compatible with F1 collection optics.

  15. Light reflecting apparatus including a multi-aberration light reflecting surface

    DOE Patents [OSTI]

    Sawicki, Richard H.; Sweatt, William

    1987-01-01

    A light reflecting apparatus including a multi-aberration bendable light reflecting surface is disclosed herein. This apparatus includes a structural assembly comprised of a rectangular plate which is resiliently bendable, to a limited extent, and which has a front side defining the multi-aberration light reflecting surface and an opposite back side, and a plurality of straight leg members rigidly connected with the back side of the plate and extending rearwardly therefrom. The apparatus also includes a number of different adjustment mechanisms, each of which is connected with specific ones of the leg members. These mechanisms are adjustably movable in different ways for applying corresponding forces to the leg members in order to bend the rectangular plate and light reflecting surface into different predetermined curvatures and which specifically include quadratic and cubic curvatures corresponding to different optical aberrations.

  16. A light reflecting apparatus including a multi-aberration light reflecting surface

    DOE Patents [OSTI]

    Sawicki, R.H.; Sweatt, W.

    1985-11-21

    A light reflecting apparatus including a multi-aberration bendable light reflecting surface is disclosed herein. This apparatus includes a structural assembly comprised of a rectangular plate which is resiliently bendable, to a limited extent, and which has a front side defining the multi-aberration light reflecting surface and an opposite back side, and a plurality of straight leg members rigidly connected with the back side of the plate and extending rearwardly therefrom. The apparatus also includes a number of different adjustment mechanisms, each of which is connected with specific ones of the leg members. These mechanisms are adjustably movable in different ways for applying corresponding forces to the leg members in order to bend the rectangular plate and light reflecting surface into different predetermined curvatures and which specifically include quadratic and cubic curvatures corresponding to different optical aberrations.

  17. Seismic reflection imaging at a Shallow Site

    SciTech Connect (OSTI)

    Milligan, P.; Rector, J.; Bainer, R.

    1997-01-01

    The objective of our studies was to determine the best seismic method to image these sediments, between the water table at 3 m depth to the basement at 35 m depth. Good cross-correlation between well logs and the seismic data was also desirable, and would facilitate the tracking of known lithological units away from the wells. For instance, known aquifer control boundaries may then be mapped out over the boundaries, and may be used in a joint inversion with reflectivity data and other non-seismic geophysical data to produce a 3-D image containing quantitative physical properties of the target area.

  18. Reflective echo tomographic imaging using acoustic beams

    DOE Patents [OSTI]

    Kisner, Roger; Santos-Villalobos, Hector J

    2014-11-25

    An inspection system includes a plurality of acoustic beamformers, where each of the plurality of acoustic beamformers including a plurality of acoustic transmitter elements. The system also includes at least one controller configured for causing each of the plurality of acoustic beamformers to generate an acoustic beam directed to a point in a volume of interest during a first time. Based on a reflected wave intensity detected at a plurality of acoustic receiver elements, an image of the volume of interest can be generated.

  19. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are important for coherent x-ray diffraction imaging-lensless imaging techniques that

  20. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are important for coherent x-ray diffraction imaging-lensless imaging techniques that

  1. Reflective optical imaging systems with balanced distortion

    DOE Patents [OSTI]

    Hudyma, Russell M.

    2001-01-01

    Optical systems compatible with extreme ultraviolet radiation comprising four reflective elements for projecting a mask image onto a substrate are described. The four optical elements comprise, in order from object to image, convex, concave, convex and concave mirrors. The optical systems are particularly suited for step and scan lithography methods. The invention enables the use of larger slit dimensions associated with ring field scanning optics, improves wafer throughput, and allows higher semiconductor device density. The inventive optical systems are characterized by reduced dynamic distortion because the static distortion is balanced across the slit width.

  2. Solar photovoltaic reflective trough collection structure

    SciTech Connect (OSTI)

    Anderson, Benjamin J.; Sweatt, William C.; Okandan, Murat; Nielson, Gregory N.

    2015-11-19

    A photovoltaic (PV) solar concentration structure having at least two troughs encapsulated in a rectangular parallelepiped optical plastic structure, with the troughs filled with an optical plastic material, the troughs each having a reflective internal surface and approximately parabolic geometry, and the troughs each including photovoltaic cells situated so that light impinging on the optical plastic material will be concentrated onto the photovoltaic cells. Multiple structures can be connected to provide a solar photovoltaic collection system that provides portable, efficient, low-cost electrical power.

  3. Reflective optical imaging system with balanced distortion

    DOE Patents [OSTI]

    Chapman, Henry N.; Hudyma, Russell M.; Shafer, David R.; Sweeney, Donald W.

    1999-01-01

    An optical system compatible with short wavelength (extreme ultraviolet) An optical system compatible with short wavelength (extreme ultraviolet) radiation comprising four reflective elements for projecting a mask image onto a substrate. The four optical elements comprise, in order from object to image, convex, concave, convex and concave mirrors. The optical system is particularly suited for step and scan lithography methods. The invention enables the use of larger slit dimensions associated with ring field scanning optics, improves wafer throughput and allows higher semiconductor device density. The inventive optical system is characterized by reduced dynamic distortion because the static distortion is balanced across the slit width.

  4. Lamp method and apparatus using multiple reflections

    DOE Patents [OSTI]

    MacLennan, Donald A.; Turner, Brian P.

    2001-01-01

    An electrodeless microwave discharge lamp includes an envelope with a discharge forming fill disposed therein which emits light, the fill being capable of absorbing light at one wavelength and re-emitting the absorbed light at a different wavelength, the light emitted from the fill having a first spectral power distribution in the absence of reflection of light back into the fill, a source of microwave energy coupled to the fill to excite the fill and cause the fill to emit light, and a reflector disposed within the microwave cavity and configured to reflect at least some of the light emitted by the fill back into the fill while allowing some light to exit, the exiting light having a second spectral power distribution with proportionately more light in the visible region as compared to the first spectral power distribution, wherein the light re-emitted by the fill is shifted in wavelength with respect to the absorbed light and the magnitude of the shift is in relation to an effective optical path length.

  5. Method for producing highly reflective metal surfaces

    DOE Patents [OSTI]

    Arnold, Jones B.; Steger, Philip J.; Wright, Ralph R.

    1983-01-01

    The invention is a novel method for producing mirror surfaces which are extremely smooth and which have high optical reflectivity. The method includes electrolessly depositing an amorphous layer of nickel on an article and then diamond-machining the resulting nickel surface to increase its smoothness and reflectivity. The machined nickel surface then is passivated with respect to the formation of bonds with electrodeposited nickel. Nickel then is electrodeposited on the passivated surface to form a layer of electroplated nickel whose inside surface is a replica of the passivated surface. The electroplated nickel layer then is separated from the passivated surface. The mandrel then may be re-passivated and provided with a layer of electrodeposited nickel, which is then recovered from the mandrel providing a second replica. The mandrel can be so re-used to provide many such replicas. As compared with producing each mirror-finished article by plating and diamond-machining, the new method is faster and less expensive.

  6. Reflection-Based Python-C++ Bindings

    SciTech Connect (OSTI)

    Generowicz, Jacek; Lavrijsen, Wim T.L.P.; Marino, Massimo; Mato, Pere

    2004-10-14

    Python is a flexible, powerful, high-level language with excellent interactive and introspective capabilities and a very clean syntax. As such, it can be a very effective tool for driving physics analysis. Python is designed to be extensible in low-level C-like languages, and its use as a scientific steering language has become quite widespread. To this end, existing and custom-written C or C++ libraries are bound to the Python environment as so-called extension modules. A number of tools for easing the process of creating such bindings exist, such as SWIG and Boost. Python. Yet, the process still requires a considerable amount of effort and expertise. The C++ language has few built-in introspective capabilities, but tools such as LCGDict and CINT add this by providing so-called dictionaries: libraries that contain information about the names, entry points, argument types, etc. of other libraries. The reflection information from these dictionaries can be used for the creation of bindings and so the process can be fully automated, as dictionaries are already provided for many end-user libraries for other purposes, such as object persistency. PyLCGDict is a Python extension module that uses LCG dictionaries, as PyROOT uses CINT reflection information, to allow /cwPython users to access C++ libraries with essentially no preparation on the users' behalf. In addition, and in a similar way, PyROOT gives ROOT users access to Python libraries.

  7. Surface roughness effects on the solar reflectance of cool asphalt...

    Office of Scientific and Technical Information (OSTI)

    The model is then used to compute the reflectance of shingles with a mixture of different colored granules, when the reflectances of the corresponding mono-color shingles are ...

  8. High order reflectivity of graphite (HOPG) crystals for x ray...

    Office of Scientific and Technical Information (OSTI)

    High order reflectivity of graphite (HOPG) crystals for x ray energies up to 22 keV Citation Details In-Document Search Title: High order reflectivity of graphite (HOPG) crystals ...

  9. Community Reflects on Pivotal Moment in History with B Reactor...

    Office of Environmental Management (EM)

    Reflects on Pivotal Moment in History with B Reactor Community Reflects on Pivotal Moment in History with B Reactor September 29, 2014 - 12:00pm Addthis David Klaus, Deputy Under ...

  10. Reflection High-Energy Electron Diffraction Beam-Induced Structural...

    Office of Scientific and Technical Information (OSTI)

    Reflection High-Energy Electron Diffraction Beam-Induced Structural and Property Changes on WO3 Thin Films Citation Details In-Document Search Title: Reflection High-Energy ...

  11. Exchange bias studied with polarized neutron reflectivity

    SciTech Connect (OSTI)

    te Velthuis, S. G. E.

    2000-01-05

    The role of Polarized Neutron Reflectivity (PNR) for studying natural and synthetic exchange biased systems is illustrated. For a partially oxidized thin film of Co, cycling of the magnetic field causes a considerable reduction of the bias, which the onset of diffuse neutron scattering shows to be due to the loosening of the ferromagnetic domains. On the other hand, PNR measurements of a model exchange bias junction consisting of an n-layered Fe/Cr antiferromagnetic (AF) superlattice coupled with an m-layered Fe/Cr ferromagnetic (F) superlattice confirm the predicted collinear magnetization in the two superlattices. The two magnetized states of the F (along or opposite to the bias field) differ only in the relative orientation of the F and adjacent AF layer. The possibility of reading clearly the magnetic state at the interface pinpoints the commanding role that PNR is having in solving this intriguing problem.

  12. Control of reflected electromagnetic fields at an IFSAR antenna

    DOE Patents [OSTI]

    Allen, Steven E.; Brock, Billy C.

    2003-12-09

    A system for reducing multi-path reflections from adjacent metal objects which cause distortion in an IFSAR includes a reflective cone extending between the top of the IFSAR and the skin of its aircraft, and a reflective shroud surrounding the IFSAR. Each of these components may be coated with radar absorbing material.

  13. LED structure with enhanced mirror reflectivity

    DOE Patents [OSTI]

    Bergmann, Michael; Donofrio, Matthew; Heikman, Sten; Schneider, Kevin S; Haberern, Kevin W; Edmond, John A

    2014-04-01

    Embodiments of the present invention are generally related to LED chips having improved overall emission by reducing the light-absorbing effects of barrier layers adjacent mirror contacts. In one embodiment, a LED chip comprises one or more LEDs, with each LED having an active region, a first contact under the active region having a highly reflective mirror, and a barrier layer adjacent the mirror. The barrier layer is smaller than the mirror such that it does not extend beyond the periphery of the mirror. In another possible embodiment, an insulator is further provided, with the insulator adjacent the barrier layer and adjacent portions of the mirror not contacted by the active region or by the barrier layer. In yet another embodiment, a second contact is provided on the active region. In a further embodiment, the barrier layer is smaller than the mirror such that the periphery of the mirror is at least 40% free of the barrier layer, and the second contact is below the first contact and accessible from the bottom of the chip.

  14. EM ARRA Best Practices and Lessons Learned Workshop: Overview...

    Office of Environmental Management (EM)

    211,975,000 211,975,000 211,960,351 Moab 108,350,000 108,350,000 108,204,128 ... Status - January 2012 www.em.doe.gov 8 Safety and Health www.em.doe.gov 9 Lessons Learned - ...

  15. Hybrid Cooling for Geothermal Power Plants: Final ARRA Project...

    Office of Scientific and Technical Information (OSTI)

    Country of Publication: United States Language: English Subject: 15 GEOTHERMAL ENERGY AIR-COOLED CONDENSERS; POWER PLANT COOLING; BINARY-CYCLE; FINNED-TUBE; HEAT TRANSFER; NEVADA; ...

  16. Hybrid Cooling for Geothermal Power Plants: Final ARRA Project Report

    SciTech Connect (OSTI)

    Bharathan, D.

    2013-06-01

    Many binary-cycle geothermal plants use air as the heat rejection medium. Usually this is accomplished by using an air-cooled condenser (ACC) system to condense the vapor of the working fluid in the cycle. Many air-cooled plants suffer a loss of production capacity of up to 50% during times of high ambient temperatures. Use of limited amounts of water to supplement the performance of ACCs is investigated. Deluge cooling is found to be one of the least-cost options. Limiting the use of water in such an application to less than one thousand operating hours per year can boost plant output during critical high-demand periods while minimizing water use in binary-cycle geothermal power plants.

  17. AVTA: ARRA EV Project Public Charging Infrastructure Maps

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following maps describe where the EV Project deployed thousands of public chargers. Background data on how this data was collected is in the EV Project: About the Reports. This research was conducted by Idaho National Laboratory.

  18. Environmental Management American Recovery & Reinvestment Act (ARRA) Lessons Learned

    Broader source: Energy.gov [DOE]

    EM has compiled many valuable lessons learned from the American Recovery and Reinvestment Act Program. Here are a few examples: Use a phased approached to the release of funding based on...

  19. American Recovery and Reinvestment Act (ARRA) FEMP Technical Assistance

    SciTech Connect (OSTI)

    Robert P. Breckenridge; Thomas R. Wood

    2010-08-01

    The purpose of this document is to evaluate the opportunity for Letterkenny Army Depot (LEAD or the Depot) to utilize biogenic methane, which may be available in shale formations under the Depot, to provide a supplemental source of natural gas that could allow the Depot to increase energy independence. Both the Director and Deputy of Public Works at the Depot are supportive in general of a methane production project, but wanted to better understand the challenges prior to embarking on such a project. This report will cover many of these issues. A similar project has been successfully developed by the U. S. Army at Ft. Knox, KY, which will be explained and referred to throughout this report as a backdrop to discussing the challenges and opportunities at LEAD, because the geologic formations and possibilities at both sites are similar. Prior to discussing the opportunity at LEAD, it is important to briefly discuss the successful methane recovery operation at Ft. Knox, because it is applicable to the projected approach for the LEAD methane system. The Ft. Knox project is an excellent example of how the U. S. Army can use an onsite renewable resource to provide a secure energy source that is not dependent on regional energy networks and foreign oil. At Ft. Knox, the U. S. Army contracted (through a utility co-op) with an energy production company to drill wells, establish a distribution infrastructure, and provide the equipment needed to prepare and compress the produced methane gas for use by base operations. The energy production company agreed to conduct the exploratory investigation at Ft. Knox with no cost to the government, as long as they could be granted a long-term contract if a reliable energy resource was established. The Depot is located, in part, over an Ordovician Age shale formation that may have the potential for producing biogenic methane, similar to the Devonian Age shale found beneath Ft. Knox. However, the Ordovician Age Shale beneath the Letterkenny Depot is not known to have any currently producing gas wells.

  20. AVTA: Chevrolet Volt ARRA Vehicle Demonstration Project Data

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following reports summarize data collected from a project General Motors conducted to deploy 150 2011 Chevrolet Volts around the country. This research was conducted by Idaho National Laboratory.

  1. American Recovery & Reinvestment Act, ARRA, clean energy projects, energy

    Broader source: Energy.gov (indexed) [DOE]

    American Express OPEN has teamed up with Women Impacting Public Policy (WIPP) and the U.S. Small Business Administration (SBA) to offer a ChallengeHER event with an OPEN for Government Contracts: Contract Connections session. This event is designed to help women-owned businesses build long-lasting, lucrative business relationships while assisting Government officials and Prime Contractors in meeting their small business goals. To learn more, please email: ContractConnections@govbizsolutions.com

  2. AVTA: ARRA EV Project Electric Grid Impact Report

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following report describes lessons learned about the impact on the electrical grid from the EV Project. The EV Project partnered with city, regional and state governments, utilities, and other organizations in 16 cities to deploy about 14,000 Level 2 PEV chargers and 300 DC fast chargers. It also deployed 5,700 all-electric Nissan Leafs and 2,600 plug-in hybrid electric Chevrolet Volts. This research was conducted by Idaho National Laboratory.

  3. WCH_CMP_NOV2009_ARRA_Attachment-A.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  4. Weatherization Works II - Summary of Findings from the ARRA Period...

    Broader source: Energy.gov (indexed) [DOE]

    ... For example, the income eligibility requirements were adjusted from being 150% of the federal poverty level to 200% and the average amount of DOE funds that could be invested in a ...

  5. Navy's Geothermal Program Office: Overview of Recovery Act (ARRA...

    Open Energy Info (EERE)

    to medium-sized (e.g. 5-50 MWe), conventional geothermal systems exist in the western U.S. Most of these may ultimately be classified as 'blind' discoveries because of their...

  6. ARRA Program Celebrates Milestone 600,000 Smart Meter Installations

    Broader source: Energy.gov [DOE]

    On April 11, 2012, DOE Recovery Act funding recipient Sacramento Municipal Utility District (SMUD) celebrated a major milestone in the development of a regional smart grid in California: the installation of over 600,000 smart meters.

  7. Project Title: Office Trailers for ARRA Project (4502)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  8. ARRA Economic Impact and Jobs | Department of Energy

    Office of Environmental Management (EM)

    Decorative Vented Gas Fireplaces Would Impose Substantial Burdens on Manufacturers | Department of Energy A Requirement for Significant Reduction in the Maximum BTU Input Rate of Decorative Vented Gas Fireplaces Would Impose Substantial Burdens on Manufacturers A Requirement for Significant Reduction in the Maximum BTU Input Rate of Decorative Vented Gas Fireplaces Would Impose Substantial Burdens on Manufacturers Comment that a requirement to reduce the BTU input rate of existing decorative

  9. 06-08-2010 ARRA-10-0146

    National Nuclear Security Administration (NNSA)

    and paint the heliostat pedestals at the Central Receiver Test Facility (CRTF) at the National Solar Thermal Test Facility (NSTTF). Sandia Site Office Replacement Facets ...

  10. Data Analysis for ARRA-funded GSHIP Demos

    Energy Savers [EERE]

    data loggers for 2 months - Well water supply temperature - Heat pump energy and output - Heat pump load side flow rate - Well pump current Progress and Accomplishments Analysis of...

  11. Progress on ARRA-funded Facility & Capability Upgrades for the...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications Vehicle Technologies Office Merit Review 2015: Battery Safety Testing Vehicle Technologies Office Merit Review 2014: Battery Safety Testing Vehicle ...

  12. 09-01-2010 ARRA-10-0300

    National Nuclear Security Administration (NNSA)

    initiate modifications to the existing Battery Abuse Testing Laboratory (BATLab) located ... Upgrades would also allow testing of a wider variety of battery types. No new hazards ...

  13. POLICY GUIDANCE MEMORANDUM #01 Documenting Hires Funded by ARRA (Expired)

    Broader source: Energy.gov [DOE]

    THIS GUIDANCE HAS EXPIRED Guidance on Documenting Hires funded by American Recovery and Reinvestment Act of 2009

  14. Microsoft Word - ARRA INVESTMENT RELEASE REVISED FINAL Aug 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WIPP USES RECOVERY ACT FUNDING TO REDUCE NUCLEAR WASTE FOOTPRINT CARLSBAD, N.M., August 2, 2011 - The U.S. Department of Energy's (DOE's) Carlsbad Field Office (CBFO) reduced the nuclear waste footprint by using American Recovery and Reinvestment Act funds to expedite the clean up of five transuranic (TRU) waste storage sites and to make important infrastructure improvements at the Waste Isolation Pilot Plant (WIPP). Expediting TRU waste shipments supports DOE's goal to dispose of 90 percent of

  15. Microsoft Word - ARRA2011ThirdQuarterUpdate.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Points of Contact: Geoff Tyree, DOE Richland Operations Office (509) 376-4171, Geoffrey.Tyree@rl.doe.gov Erik Olds, DOE Office of River Protection www.hanford.gov/recovery (509) 372-8656,Theodore_E_Erik_Olds@orp.doe.gov RECOVERY ACT JOBS: HANFORD SITE HANFORD FUNDS (Payments as of Sept. 30, 2011) Allocated Spent to Date DOE Richland Operations Office $1,634,500,000 $1,459,423,508 DOE Office of River Protection $326,035,000 $313,577,729 Hanford Total $1,960,535,000 $1,773,001,237 HANFORD

  16. Microsoft Word - Carlsbad ARRA Office Release-Final-1 _2_

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE CARLSBAD FIELD OFFICE OPENS LOCAL RECOVERY ACT OFFICE CARLSBAD, N.M., June 25, 2009 - The U.S. Department of Energy announced today that DOE's Carlsbad Field Office (CBFO) recently opened a local office to support the CBFO Recovery Act Project. The office - located at 315 N. Canal - will be staffed by CBFO and contractor personnel dedicated to managing CBFO Recovery Act Project activities. In order to meet the Recovery Act's commitment to transparency and accountability, the office staff

  17. AVTA: ARRA EV Project Nissan Leaf Data Summary Reports

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following reports provide summary overviews of the 5,700 all-electric Nissan Leafs deployed through the EV Project. It also deployed about 14,000 Level 2 PEV chargers and 300 DC fast chargers. Background data on how this data was collected is in the EV Project: About the Reports. This research was conducted by Idaho National Laboratory.

  18. Microsoft Word - HABAdv #232_ARRA_Funding.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Protection Agency, Region 10 309 Bradley Blvd., Suite 115 Richland, WA 99352 Jane Hedges, Program Manager Washington State Department of Ecology 3100 Port of Benton...

  19. AVTA: ARRA EV Project Chevrolet Volt Data Summary Reports

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following reports provide summary overviews of the 2,600 plug-in hybrid electric Chevrolet Volts deployed through the EV Project. It also deployed about 14,000 Level 2 PEV chargers and 300 DC fast chargers. Background data on how this data was collected is in the EV Project: About the Reports. This research was conducted by Idaho National Laboratory.

  20. 04-06-2010 ARRA-10-0162

    National Nuclear Security Administration (NNSA)

    ...wildlife management B1.26 - Sitingconstructionoperationdecommissioning of small water B1.27 - Disconnection of utilities B1.28 - Placement of unused facilities in ...

  1. 05-19-2010 ARRA-10-0238

    National Nuclear Security Administration (NNSA)

    ...wildlife management B1.26 - Sitingconstructionoperationdecommissioning of small water B1.27 - Disconnection of utilities B1.28 - Placement of unused facilities in ...

  2. 06-14-2010 ARRA-10-0185

    National Nuclear Security Administration (NNSA)

    ...wildlife management B1.26 - Sitingconstructionoperationdecommissioning of small water B1.27 - Disconnection of utilities B1.28 - Placement of unused facilities in ...

  3. 07-09-2010 ARRA-10-0180

    National Nuclear Security Administration (NNSA)

    ...wildlife management B1.26 - Sitingconstructionoperationdecommissioning of small water B1.27 - Disconnection of utilities B1.28 - Placement of unused facilities in ...

  4. 2009-04 "Priorities for ARRA Stimulus Funding for Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for the citizens of Northern New Mexico in the high-paying clean-up jobs over the ... More Documents & Publications 2009-09 "Support for Community Outreach on EM Education and ...

  5. Project_Descriptions_ITP_ARRA_Awards.xls | Department of Energy

    Office of Environmental Management (EM)

    More Documents & Publications Capturing Waste Gas: Saves Energy, Lower Costs - Case Study, 2013 Combined Heat and Power Market Potential for Opportunity Fuels, August...

  6. Microsoft Word - ARRA INVESTMENT RELEASE REVISED FINAL Aug 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    were cleaned of legacy TRU waste during its first 10 years. Through the Recovery Act investment, eight additional sites will be cleaned of legacy TRU waste during the three year...

  7. EAC Presentation: Metrics and Benefits Analysis for the ARRA...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and benefits analysis for the American Recovery and Reinvestment Act smart grid programs including the Smart Grid Investment Grants and the Smart Grid Demonstration Program. ...

  8. Weatherization Formula Grants- American Recovery and Reinvestment Act (ARRA)

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy Weatherization Assistance Program, funding for the states, energy efficiency for low-income families, American Recovery and Reinvestment Act of 2009

  9. ARRA Site Characterization Projects | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    are developing comprehensive data sets of formation characteristics (porosity, permeability, reservoir architecture, cap rock integrity, etc.) while also acquiring information...

  10. ARRA wraps up | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and paved the way for further modernization activities at the site," said Eva Irwin, who co-led the Recovery Act work. Most of the 200 B&W Y-12 jobs resulted from a...

  11. The American Recovery and Reinvestment Act (ARRA) Energy Assurance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VOLUME 1, NUMBER 4. For more information about how OE is protecting and improving the resiliency of the Energy Sector in the face of both manmade and natural disasters, visit the ...

  12. The American Recovery and Reinvestment Act (ARRA) Energy Assurance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VOLUME 3, NUMBER 3. For more information about how OE is protecting and improving the resiliency of the Energy Sector in the face of both manmade and natural disasters, visit the ...

  13. The American Recovery and Reinvestment Act (ARRA) Energy Assurance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VOLUME 3, NUMBER 4. For more information about how OE is protecting and improving the resiliency of the Energy Sector in the face of both manmade and natural disasters, visit the ...

  14. The American Recovery and Reinvestment Act (ARRA) Energy Assurance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VOLUME 1, NUMBER 3. For more information about how OE is protecting and improving the resiliency of the Energy Sector in the face of both manmade and natural disasters, visit the ...

  15. The American Recovery and Reinvestment Act (ARRA) Energy Assurance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VOLUME 2, NUMBER 4. For more information about how OE is protecting and improving the resiliency of the Energy Sector in the face of both manmade and natural disasters, visit the ...

  16. The American Recovery and Reinvestment Act (ARRA) Energy Assurance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VOLUME 3, NUMBER 2. For more information about how OE is protecting and improving the resiliency of the Energy Sector in the face of both manmade and natural disasters, visit the ...

  17. The American Recovery and Reinvestment Act (ARRA) Energy Assurance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VOLUME 1, NUMBER 1. For more information about how OE is protecting and improving the resiliency of the Energy Sector in the face of both manmade and natural disasters, visit the ...

  18. The American Recovery and Reinvestment Act (ARRA) Energy Assurance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VOLUME 2, NUMBER 3. For more information about how OE is protecting and improving the resiliency of the Energy Sector in the face of both manmade and natural disasters, visit the ...

  19. The American Recovery and Reinvestment Act (ARRA) Energy Assurance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VOLUME 2, NUMBER 1. For more information about how OE is protecting and improving the resiliency of the Energy Sector in the face of both manmade and natural disasters, visit the ...

  20. The American Recovery and Reinvestment Act (ARRA) Energy Assurance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VOLUME 1, NUMBER 2. For more information about how OE is protecting and improving the resiliency of the Energy Sector in the face of both manmade and natural disasters, visit the ...

  1. The American Recovery and Reinvestment Act (ARRA) Energy Assurance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VOLUME 2, NUMBER 2. For more information about how OE is protecting and improving the resiliency of the Energy Sector in the face of both manmade and natural disasters, visit the ...

  2. The American Recovery and Reinvestment Act (ARRA) Energy Assurance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VOLUME 3, NUMBER 1. For more information about how OE is protecting and improving the resiliency of the Energy Sector in the face of both manmade and natural disasters, visit the ...

  3. ARRA Homes Weatherized by Grantee | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Montana 3,310 6,860 Navajo Nation 610 855 Nebraska 3,590 4,842 Nevada** 8,081 9,974 New Hampshire 2,742 3,581 New Jersey 11,290 13,989 New Mexico 3,201 4,488 New York** 40,021 ...

  4. ARRA870A Recovery Act - Recip Details for Next Quarter

    Broader source: Energy.gov (indexed) [DOE]

    ... Innovative Exploration Technologies",831282384,81.087,,"app... "FLODESIGN WIND TURBINE CORP.","AR0000015","Contra...vnd.ms-excel" "FLORIDA A & M ...

  5. American Recovery and Reinvestment Act (ARRA) Sustainable Initiatives...

    Broader source: Energy.gov (indexed) [DOE]

    Housing Authority Project Description: Construct 20 housing units, and a community building & longhouse *Green and Energy Efficient Features *LEED GoldPlatinum certification ...

  6. Reflection Survey At Hot Sulphur Springs Area (Goranson, 2005...

    Open Energy Info (EERE)

    Reflection Survey Activity Date Usefulness useful DOE-funding Unknown References Colin Goranson (2005) Recent Drilling Activities At The Earth Power Resources Tuscarora...

  7. Reflection Survey At Snake River Plain Region (DOE GTP) | Open...

    Open Energy Info (EERE)

    Community Login | Sign Up Search Page Edit with form History Reflection Survey At Snake River Plain Region (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home...

  8. Reflection Survey At San Emidio Desert Area (DOE GTP) | Open...

    Open Energy Info (EERE)

    San Emidio Desert Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Reflection Survey At San Emidio Desert Area (DOE GTP)...

  9. Reflection Survey At Coso Geothermal Area (1989) | Open Energy...

    Open Energy Info (EERE)

    1989) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Reflection Survey At Coso Geothermal Area (1989) Exploration Activity Details Location Coso...

  10. Clean Energy Transition: Reflections on the Past Decade

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Clean Energy Transition: Reflections on the Past Decade NREL Industry Growth Forum Dr. Dan E. Arvizu Laboratory Director November 2015 2 Energy Market Fundamentals Globally...

  11. Reflection Survey At Under Steamboat Springs Area (Warpinski...

    Open Energy Info (EERE)

    Reflection Survey Activity Date Usefulness not indicated DOE-funding Unknown Notes Update to Warpinski, et al., 2002 References N. R. Warpinski, A. R. Sattler, R. Fortuna, D....

  12. Integrated X-ray Reflectivity Measurements for Elliptically Curved...

    Office of Scientific and Technical Information (OSTI)

    Title: Integrated X-ray Reflectivity Measurements for Elliptically Curved PET Crystals The elliptically curved pentaerythritol (PET) crystals used in the Supersnout 2 X-ray ...

  13. Reflection Survey At The Needles Area (DOE GTP) | Open Energy...

    Open Energy Info (EERE)

    The Needles Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Reflection Survey At The Needles Area (DOE GTP) Exploration Activity...

  14. Reflection Survey At Jemez Pueblo Area (DOE GTP) | Open Energy...

    Open Energy Info (EERE)

    Jemez Pueblo Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Reflection Survey At Jemez Pueblo Area (DOE GTP) Exploration Activity...

  15. Reflection Survey At Wister Area (DOE GTP) | Open Energy Information

    Open Energy Info (EERE)

    Wister Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Reflection Survey At Wister Area (DOE GTP) Exploration Activity Details...

  16. Copper-assisted, anti-reflection etching of silicon surfaces...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Find More Like This Return to Search Copper-assisted, anti-reflection etching of ... The method (300) includes electroless deposition of copper nanoparticles about 20 ...

  17. Reflection Survey At Coso Geothermal Area (2008) | Open Energy...

    Open Energy Info (EERE)

    field, which lies within an extensional step-over between dextral faults, is a young, actively developing metamorphic core complex. The reflection images were processed...

  18. Seismic Reflection Data and Conceptual Models for Geothermal...

    Open Energy Info (EERE)

    failure of seismic reflection data to image thesubsurface demonstrates the robust reliability of aconceptual model approach to geothermal exploration thatemphasizes the...

  19. Measurement of reflectivity of spherically bent crystals using...

    Office of Scientific and Technical Information (OSTI)

    laser-matter interaction Citation Details In-Document Search Title: Measurement of reflectivity of spherically bent crystals using K signal from hot electrons produced by laser-...

  20. Reflection Survey At Blue Mountain Geothermal Area (Melosh, Et...

    Open Energy Info (EERE)

    model of blue mountain. References Glenn Melosh, William Cumming, John Casteel, Kim Niggemann, Brian Fairbank (2010) Seismic Reflection Data and Conceptual Models for...

  1. Surface roughness effects on the solar reflectance of cool asphalt...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Surface roughness effects on the solar reflectance of cool asphalt shingles Citation Details In-Document Search Title: Surface roughness effects on the solar ...

  2. Reflection Survey At Neal Hot Springs Geothermal Area (Colwell...

    Open Energy Info (EERE)

    At Neal Hot Springs Geothermal Area (Colwell, Et Al., 2012) Exploration Activity Details Location Neal Hot Springs Geothermal Area Exploration Technique Reflection Survey Activity...

  3. Apparatus for and method of correcting for astigmatism in a light beam reflected off of a light reflecting surface

    DOE Patents [OSTI]

    Sawicki, R.H.; Sweatt, W.

    1985-11-21

    A technique for adjustably correcting for astigmatism in a light beam is disclosed herein. This technique defines a flat, rectangular light reflecting surface having opposite reinforced side edges and which is resiliently bendable, to a limited extent, into different concave and/or convex cylindrical curvatures about a particular axis and provides for adjustably bending the light reflecting surface into one of different curvatures depending upon the astigmatism to be corrected and for fixedly maintaining the curvature selected. In the embodiment disclosed, the light reflecting surface is adjustably bendable into the selected cylindrical curvature by application of a particular bending moment to the reinforced side edges of the light reflecting surface.

  4. Reflection soft X-ray microscope and method

    DOE Patents [OSTI]

    Suckewer, S.; Skinner, C.H.; Rosser, R.

    1993-01-05

    A reflection soft X-ray microscope is provided by generating soft X-ray beams, condensing the X-ray beams to strike a surface of an object at a predetermined angle, and focusing the X-ray beams reflected from the surface onto a detector, for recording an image of the surface or near surface features of the object under observation.

  5. Reflection soft X-ray microscope and method

    DOE Patents [OSTI]

    Suckewer, Szymon; Skinner, Charles H.; Rosser, Roy

    1993-01-01

    A reflection soft X-ray microscope is provided by generating soft X-ray beams, condensing the X-ray beams to strike a surface of an object at a predetermined angle, and focusing the X-ray beams reflected from the surface onto a detector, for recording an image of the surface or near surface features of the object under observation.

  6. Parametric reflection upon cascade interaction of focused optical beams

    SciTech Connect (OSTI)

    Lobanov, V E; Sukhorukov, A P; Sukhorukova, A K

    2008-10-31

    The parametric reflection of a signal beam in the waist of the reference pump beam upon mismatched three-frequency interaction in a quadratically nonlinear medium is discussed. The critical angle of total internal reflection from the induced defocusing channel is found as a function of the beam waist parameters. It is shown that when the reference beam is focused, this angle increases and some distortions are introduced into the reflected wave due to a finite length of the waist. The modification of the cross section of a wave reflected from a convex parametric mirror is analysed. The optimal beam focusing geometry is found at which the distortions of the shape and divergence of the reflected wave are minimal. Under certain conditions, the signal wave also flows around a cylindrical inhomogeneity produced by the axially symmetric pump beam. The results of theoretical analysis and numerical simulation are in good agreement. (nonlinear optical phenomena)

  7. Reflective optical imaging system for extreme ultraviolet wavelengths

    DOE Patents [OSTI]

    Viswanathan, V.K.; Newnam, B.E.

    1993-05-18

    A projection reflection optical system has two mirrors in a coaxial, four reflection configuration to reproduce the image of an object. The mirrors have spherical reflection surfaces to provide a very high resolution of object feature wavelengths less than 200 [mu]m, and preferably less than 100 [mu]m. An image resolution of features less than 0.05-0.1 [mu]m, is obtained over a large area field; i.e., 25.4 mm [times] 25.4 mm, with a distortion less than 0.1 of the resolution over the image field.

  8. Reflective optical imaging system for extreme ultraviolet wavelengths

    DOE Patents [OSTI]

    Viswanathan, Vriddhachalam K.; Newnam, Brian E.

    1993-01-01

    A projection reflection optical system has two mirrors in a coaxial, four reflection configuration to reproduce the image of an object. The mirrors have spherical reflection surfaces to provide a very high resolution of object feature wavelengths less than 200 .mu.m, and preferably less than 100 .mu.m. An image resolution of features less than 0.05-0.1 .mu.m, is obtained over a large area field; i.e., 25.4 mm .times.25.4 mm, with a distortion less than 0.1 of the resolution over the image field.

  9. Reduction of Glass Surface Reflectance by Ion Beam Surface Modification

    SciTech Connect (OSTI)

    Mark Spitzer

    2011-03-11

    This is the final report for DOE contract DE-EE0000590. The purpose of this work was to determine the feasibility of the reduction of the reflection from the front of solar photovoltaic modules. Reflection accounts for a power loss of approximately 4%. A solar module having an area of one square meter with an energy conversion efficiency of 18% generates approximately 180 watts. If reflection loss can be eliminated, the power output can be increased to 187 watts. Since conventional thin-film anti-reflection coatings do not have sufficient environmental stability, we investigated the feasibility of ion beam modification of the glass surface to obtain reduction of reflectance. Our findings are generally applicable to all solar modules that use glass encapsulation, as well as commercial float glass used in windows and other applications. Ion implantation of argon, fluorine, and xenon into commercial low-iron soda lime float glass, standard float glass, and borosilicate glass was studied by implantation, annealing, and measurement of reflectance. The three ions all affected reflectance. The most significant change was obtained by argon implantation into both low-iron and standard soda-lime glass. In this way samples were formed with reflectance lower than can be obtained with a single-layer coatings of magnesium fluoride. Integrated reflectance was reduced from 4% to 1% in low-iron soda lime glass typical of the glass used in solar modules. The reduction of reflectance of borosilicate glass was not as large; however borosilicate glass is not typically used in flat plate solar modules. Unlike conventional semiconductor ion implantation doping, glass reflectance reduction was found to be tolerant to large variations in implant dose, meaning that the process does not require high dopant uniformity. Additionally, glass implantation does not require mass analysis. Simple, high current ion implantation equipment can be developed for this process; however, before the process

  10. Fabrication of optically reflecting ohmic contacts for semiconductor devices

    DOE Patents [OSTI]

    Sopori, Bhushan L.

    1995-01-01

    A method is provided to produce a low-resistivity ohmic contact having high optical reflectivity on one side of a semiconductor device. The contact is formed by coating the semiconductor substrate with a thin metal film on the back reflecting side and then optically processing the wafer by illuminating it with electromagnetic radiation of a predetermined wavelength and energy level through the front side of the wafer for a predetermined period of time. This method produces a thin epitaxial alloy layer between the semiconductor substrate and the metal layer when a crystalline substrate is used. The alloy layer provides both a low-resistivity ohmic contact and high optical reflectance.

  11. Measuring solar reflectance Part II: Review of practical methods...

    Office of Scientific and Technical Information (OSTI)

    solar position, and found that clear sky air mass 1 global horizontal (AM1GH) solar ... Rsub g,0more to within 0.006. The air mass 1.5 solar reflectance measured with ...

  12. Effect of particle nonsphericity on bidirectional reflectance of cirrus clouds

    SciTech Connect (OSTI)

    Mishchenko, M.I.; Rossow, W.B.; Macke, A.; Lacis, A.A.

    1996-04-01

    This paper describes the use of the fractal ice particle method to study the differences in bidirectional reflectance caused by the differences in the single scattering phase functions of spherical water droplets and nonspherical ice crystals.

  13. High order reflectivity of graphite (HOPG) crystals for x ray...

    Office of Scientific and Technical Information (OSTI)

    In second order the integrated reflectivity decreases from 1.3 mrad at 12.6 keV to ... Country of Publication: United States Language: English Subject: 70 PLASMA PHYSICS AND FUSION; ...

  14. NREL: Technology Transfer - NREL and SkyFuel Partnership Reflects...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL and SkyFuel Partnership Reflects Bright Future for Solar Energy In this video, NREL Principal Scientist Gary Jorgensen and SkyFuel Chief Technology Officer Randy Gee talk...

  15. Anti-reflective nanoporous silicon for efficient hydrogen production

    DOE Patents [OSTI]

    Oh, Jihun; Branz, Howard M

    2014-05-20

    Exemplary embodiments are disclosed of anti-reflective nanoporous silicon for efficient hydrogen production by photoelectrolysis of water. A nanoporous black Si is disclosed as an efficient photocathode for H.sub.2 production from water splitting half-reaction.

  16. Visible Reflectivity System for High-Pressure Studies. (Journal...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Visible Reflectivity System for ... OSTI Identifier: 1073453 Report Number(s): SAND2013-2893J Journal ID: ISSN 0034-6748 DOE ...

  17. Measuring solar reflectance Part I: Defining a metric that accurately...

    Office of Scientific and Technical Information (OSTI)

    A widely used solar reflectance metric based on the ASTM Standard E891 beam-normal solar spectral irradiance underestimates the solar heat gain of a spectrally selective 'cool ...

  18. Method of fabricating reflection-mode EUV diffraction elements

    DOE Patents [OSTI]

    Naulleau, Patrick P.

    2002-01-01

    Techniques for fabricating a well-controlled, quantized-level, engineered surface that serves as substrates for EUV reflection multilayer overcomes problems associated with the fabrication of reflective EUV diffraction elements. The technique when employed to fabricate an EUV diffraction element that includes the steps of: (a) forming an etch stack comprising alternating layers of first and second materials on a substrate surface where the two material can provide relative etch selectivity; (b) creating a relief profile in the etch stack wherein the relief profile has a defined contour; and (c) depositing a multilayer reflection film over the relief profile wherein the film has an outer contour that substantially matches that of the relief profile. For a typical EUV multilayer, if the features on the substrate are larger than 50 nm, the multilayer will be conformal to the substrate. Thus, the phase imparted to the reflected wavefront will closely match that geometrically set by the surface height profile.

  19. Retiring Procurement Official Reflects on Career | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Retiring Procurement Official Reflects on Career Retiring Procurement Official Reflects on Career August 28, 2014 - 12:00pm Addthis Pamela Thompson is retiring from her 37-year federal career. Pamela Thompson is retiring from her 37-year federal career. LEXINGTON, Ky. - As the retiring supervisory contracting officer for EM's Portsmouth/Paducah Project Office (PPPO), Pamela Thompson exemplifies the wisdom of her own advice. She credits her diverse 37-year federal career to confidently seeking

  20. Repetitive output laser system and method using target reflectivity

    DOE Patents [OSTI]

    Johnson, Roy R.

    1978-01-01

    An improved laser system and method for implosion of a thermonuclear fuel pellet in which that portion of a laser pulse reflected by the target pellet is utilized in the laser system to initiate a succeeding target implosion, and in which the energy stored in the laser system to amplify the initial laser pulse, but not completely absorbed thereby, is used to amplify succeeding laser pulses initiated by target reflection.

  1. Rapid Solar Mirror Characterization with Fringe Reflection Techniques -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Innovation Portal Thermal Solar Thermal Energy Analysis Energy Analysis Find More Like This Return to Search Rapid Solar Mirror Characterization with Fringe Reflection Techniques SOFAST: Sandia Optical Fringe Analysis Slope Tool Sandia National Laboratories Contact SNL About This Technology Publications: PDF Document Publication Market Sheet (834 KB) SOFAST Imaging SOFAST Imaging Technology Marketing SummaryThis technology is an automated system in which the reflection of a mirror,

  2. Entanglement entropy in quantum spin chains with broken reflection symmetry

    SciTech Connect (OSTI)

    Kadar, Zoltan; Zimboras, Zoltan

    2010-09-15

    We investigate the entanglement entropy of a block of L sites in quasifree translation-invariant spin chains concentrating on the effect of reflection-symmetry breaking. The Majorana two-point functions corresponding to the Jordan-Wigner transformed fermionic modes are determined in the most general case; from these, it follows that reflection symmetry in the ground state can only be broken if the model is quantum critical. The large L asymptotics of the entropy are calculated analytically for general gauge-invariant models, which have, until now, been done only for the reflection-symmetric sector. Analytical results are also derived for certain nongauge-invariant models (e.g., for the Ising model with Dzyaloshinskii-Moriya interaction). We also study numerically finite chains of length N with a nonreflection-symmetric Hamiltonian and report that the reflection symmetry of the entropy of the first L spins is violated but the reflection-symmetric Calabrese-Cardy formula is recovered asymptotically. Furthermore, for noncritical reflection-symmetry-breaking Hamiltonians, we find an anomaly in the behavior of the saturation entropy as we approach the critical line. The paper also provides a concise but extensive review of the block-entropy asymptotics in translation-invariant quasifree spin chains with an analysis of the nearest-neighbor case and the enumeration of the yet unsolved parts of the quasifree landscape.

  3. Bidirectional Reflection Distribution Functions from surface bump maps

    SciTech Connect (OSTI)

    Cabral, B.K.

    1988-06-17

    The interaction of light and matter define what we see. This interaction can be characterized by a function which relates incoming light to the distribution of outgoing or reflected light. The Bidirectional Reflection Distribution Function (BRDF) is just such a function. Computer graphics scientists attempting to model this function have made simplifying assumptions about the reflecting surfaces. These simpler models have produced adequate results but only handle very uniform or isotropic surface characteristics. Reality on the other hand is filled with a variety of surface textures which result in a variety of BRDFs. This thesis broadens the class of BRDFs which can be used in computer graphics to render objects more realistically. It presents two enhancements to previous work done by the author. First, it describes a method for the approximation of surface absorption of light through the use of a computed geometric attentuation factor. This factor is computed by calculating the parts of the surface which are visible in the incident and reflecting directions. Specifically, it describes the algorithms and theory behind the visibility calculations and how it affects the reflection properties of the surface. Second, it describes a method for computing Fresnel's Law for conducting and dielectric surface materials and how Fresnel's Law affects surface reflectivity. This work also presents a method for rendering objects using the computed BRDFs. 38 refs., 29 figs., 2 tabs.

  4. Apparatus for and method of correcting for astigmatism in a light beam reflected off of a light reflecting surface

    DOE Patents [OSTI]

    Sawicki, Richard H.; Sweatt, William

    1987-01-01

    A technique for adjustably correcting for astigmatism in a light beam is disclosed herein. This technique utilizes first means which defines a flat, rectangular light reflecting surface having opposite reinforced side edges and which is resiliently bendable, to a limited extent, into different concave and/or convex cylindrical curvatures about a particular axis and second means acting on the first means for adjustably bending the light reflecting surface into a particular selected one of the different curvatures depending upon the astigmatism to be corrected for and for fixedly maintaining the curvature selected. In the embodiment disclosed, the light reflecting surface is adjustably bendable into the selected cylindrical curvature by application of a particular bending moment to the reinforced side edges of the light reflecting surface.

  5. Characterizing Photometric Flicker Test-sample Data Spreadsheet

    Energy Savers [EERE]

    Test Source Dim State MATLAB Assigned FFF METER FFF MATLAB Percent Flicker METER Percent Flicker MATLAB Flicker Index METER Flicker Index Frequency Response Waveform MATLAB ...

  6. Project Award Spreadsheets 2010 12 21 1232.xlsx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    200,000 Davenport IA IA-001 100,827 200,000 Delray Beach FL FL-022 64,092 130,000 Durango CO CO-003 16,416 58,500 Flint MI MI-005 112,900 199,814 Fort Wayne IN IN-003 251,591 ...

  7. Project Award Spreadsheets 2010 12 21 1232.xlsx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Interconnection Organization Recovery Act Funding PJM Interconnection, LLC $16,000,000 The National Association of Regulatory Utility Commissioners (NARUC) $14,000,000 Western Electricity Coordinating Council $14,500,000 Western Governors' Association $12,000,000 Electric Reliability Council of Texas (ERCOT) $2,500,000 Electric Reliability Council of Texas (ERCOT) for work with Texas government agencies $1,000,000 Interconnection Transmission Planning Eastern Interconnection Western

  8. Project Award Spreadsheets 2010 12 21 1232.xlsx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    City HQ State Congressional District(s) Population Recovery Act Funding* Asheville ** NC NC-011 500,000 $209,940 Aspen CO CO-003 5,902 $59,193 Aurora CO CO-007 319,057 $151,800 Baltimore MD MD-002 636,919 $200,000 Baton Rouge LA LA-6 223,689 $200,000 Boston MA MA-009 609,023 $300,000 Casper WY WY-001 54,047 $130,000 Chicago IL IL-005 2,853,114 $300,000 Chula Vista CA CA-051 219,318 $200,000 City and County of Denver CO CO-001 598,707 $210,040 Columbia MO MO-009 100,733 $200,000 Davenport IA

  9. Project Award Spreadsheets 2010 12 21 1232.xlsx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Recovery Act Funding* Alabama $627,742 Arizona $796,410 Arkansas $461,990 California $3,572,526 Colorado $653,209 Connecticut $521,250 Delaware $280,109 District of Columbia $254,302 Florida $1,881,676 Georgia $1,088,694 Hawaii $318,196 Idaho $339,814 Iowa $475,493 Illinois $1,383,754 Indiana $785,088 Kentucky $591,715 Louisiana $604,703 Maine $320,789 Maryland $716,898 Massachusetts $796,207 Michigan $1,117,842 Minnesota $678,986 Mississippi $469,626 Missouri $742,406 Montana $288,765 Nebraska

  10. Appendices and Risk Assessment Spreadsheet Version No. Fermi...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The lead engineer will determine the degree of oversight you will need using a risk-based graded approach. On other occasions you will do design work as a member of a...

  11. Wind for Schools Funding Spreadsheet | Open Energy Information

    Open Energy Info (EERE)

    search Wind for Schools Portal Home Comparison Motion Chart Educational Resources Turbine Support Software & Downloads Wind Industry Careers Wind for Schools Funding...

  12. Project Award Spreadsheets 2010 12 21 1232.xlsx

    Broader source: Energy.gov (indexed) [DOE]

    469,626 Missouri 742,406 Montana 288,765 Nebraska 363,635 Nevada 438,573 New Hampshire 320,729 New Jersey 996,658 New Mexico 382,070 New York 1,988,289 North ...

  13. Project Award Spreadsheets 2010 12 21 1232.xlsx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Western Governors' Association 12,000,000 Electric Reliability Council of Texas (ERCOT) 2,500,000 Electric Reliability Council of Texas (ERCOT) for work with Texas government ...

  14. 1991 Tables and Spreadsheets and Answers to Frequently Asked...

    U.S. Energy Information Administration (EIA) Indexed Site

    (Table A49) Relationship between Energy and Manufacturing Operations Q:How does energy consumption relate to operating costs? A: :For a review of selected operating ratios,...

  15. Research Needs: Glass Solar Reflectance and Vinyl Siding

    SciTech Connect (OSTI)

    Hart, Robert; Curcija, Charlie; Arasteh, Dariush; Goudey, Howdy; Kohler, Christian; Selkowitz, Stephen

    2011-07-07

    The subject of glass solar reflectance and its contribution to permanent vinyl siding distortion has not been extensively studied, and some phenomena are not yet well understood. This white paper presents what is known regarding the issue and identifies where more research is needed. Three primary topics are discussed: environmental factors that control the transfer of heat to and from the siding surface; vinyl siding properties that may affect heat build-up and permanent distortion; and factors that determine the properties of reflected solar radiation from glass surfaces, including insulating window glass. Further research is needed to fully characterize the conditions associated with siding distortion, the scope of the problem, physical properties of vinyl siding, insulating window glass reflection characteristics, and possible mitigation or prevention strategies.

  16. Fiber optic moisture sensor with moisture-absorbing reflective target

    DOE Patents [OSTI]

    Kirkham, Randy R.

    1987-01-01

    A method and apparatus for sensing moisture changes by utilizing optical fiber technology. One embodiment uses a reflective target at the end of an optical fiber. The reflectance of the target varies with its moisture content and can be detected by a remote unit at the opposite end of the fiber. A second embodiment utilizes changes in light loss along the fiber length. This can be attributed to changes in reflectance of cladding material as a function of its moisture content. It can also be affected by holes or inserts interposed in the cladding material and/or fiber. Changing light levels can also be coupled from one fiber to another in an assembly of fibers as a function of varying moisture content in their overlapping lengths of cladding material.

  17. DYNA3D Non-reflecting Boundary Conditions - Test Problems

    SciTech Connect (OSTI)

    Zywicz, E

    2006-09-28

    Two verification problems were developed to test non-reflecting boundary segments in DYNA3D (Whirley and Engelmann, 1993). The problems simulate 1-D wave propagation in a semi-infinite rod using a finite length rod and non-reflecting boundary conditions. One problem examines pure pressure wave propagation, and the other problem explores pure shear wave propagation. In both problems the non-reflecting boundary segments yield results that differ only slightly (less than 6%) during a short duration from their corresponding theoretical solutions. The errors appear to be due to the inability to generate a true step-function compressive wave in the pressure wave propagation problem and due to segment integration inaccuracies in the shear wave propagation problem. These problems serve as verification problems and as regression test problems for DYNA3D.

  18. Reflective insulating blinds for windows and the like

    DOE Patents [OSTI]

    Barnes, P.R.; Shapira, H.B.

    1979-12-07

    Energy-conserving window blinds are provided. The blinds are fabricated from coupled and adjustable slats, each slat having an insulation layer and a reflective surface to face outwardly when the blinds are closed. A range of desired light and air transmission may be selected with the reflective surfaces of the slats adapted to direct sunlight upward toward the ceiling when the blinds are open. When the blinds are closed, the insulation of the slats reduces the heat loss or gain produced by the windows. If desired, the reflective surfaces of the slats may be concave. The edges of the slats are designed to seal against adjacent slats when the blinds are closed to ensure minimum air flow between slats.

  19. Reflective insulating blinds for windows and the like

    DOE Patents [OSTI]

    Barnes, Paul R.; Shapira, Hanna B.

    1981-01-01

    Energy-conserving window blinds are provided. The blinds are fabricated from coupled and adjustable slats, each slat having an insulation layer and a reflective surface to face outwardly when the blinds are closed. A range of desired light and air transmission may be selected with the reflective surfaces of the slats adapted to direct sunlight upward toward the ceiling when the blinds are open. When the blinds are closed, the insulation of the slats reduces the heat loss or gain produced by the windows. If desired, the reflective surfaces of the slats may be concave. The edges of the slats are designed to seal against adjacent slats when the blinds are closed to ensure minimum air flow between slats.

  20. Corrosion-resistant multilayer structures with improved reflectivity

    DOE Patents [OSTI]

    Soufli, Regina; Fernandez-Perea, Monica; Robinson, Jeff C.

    2013-04-09

    In one general embodiment, a thin film structure includes a substrate; a first corrosion barrier layer above the substrate; a reflective layer above the first corrosion barrier layer, wherein the reflective layer comprises at least one repeating set of sub-layers, wherein one of the sub-layers of each set of sub-layers being of a corrodible material; and a second corrosion barrier layer above the reflective layer. In another general embodiment, a system includes an optical element having a thin film structure as recited above; and an image capture or spectrometer device. In a further general embodiment, a laser according to one embodiment includes a light source and the thin film structure as recited above.

  1. Effect of window reflections on photonic Doppler velocimetry measurements

    SciTech Connect (OSTI)

    Ao, T.; Dolan, D. H.

    2011-02-15

    Photonic Doppler velocimetry (PDV) has rapidly become a standard diagnostic for measuring velocities in dynamic compression research. While free surface velocity measurements are fairly straightforward, complications occur when PDV is used to measure a dynamically loaded sample through a window. Fresnel reflections can severely affect the velocity and time resolution of PDV measurements, especially for low-velocity transients. Shock experiments of quartz compressed between two sapphire plates demonstrate how optical window reflections cause ringing in the extracted PDV velocity profile. Velocity ringing is significantly reduced by using either a wedge window or an antireflective coating.

  2. Solar films seen as cheaper alternative to reflective glass

    SciTech Connect (OSTI)

    Andrews, W.

    1982-06-28

    It costs only one-third as much to install solar film used with clear glass as it does to install reflective glass, and further savings will come in maintenance and replacement costs. Except for the Sunbelt, architects and builders are less enthusiastic about the solar films and reluctant to use them in quality construction because of their reputation for deteriorating. Manufacturers note that field-applied films are not as durable as factory-bonded reflective glass. Several users and architects report their experiences with solar-film performance. Two directories list 116 major manufacturers of doors and windows and 33 suppliers of window-treatment products. (DCK)

  3. High reflectivity mirrors and method for making same

    DOE Patents [OSTI]

    Heikman, Sten; Jacob-Mitos, Matthew; Li, Ting; Ibbetson, James

    2016-06-07

    A composite high reflectivity mirror (CHRM) with at least one relatively smooth interior surface interface. The CHRM includes a composite portion, for example dielectric and metal layers, on a base element. At least one of the internal surfaces is polished to achieve a smooth interface. The polish can be performed on the surface of the base element, on various layers of the composite portion, or both. The resulting smooth interface(s) reflect more of the incident light in an intended direction. The CHRMs may be integrated into light emitting diode (LED) devices to increase optical output efficiency

  4. Broad Band Intra-Cavity Total Reflection Chemical Sensor

    DOE Patents [OSTI]

    Pipino, Andrew C. R.

    1998-11-10

    A broadband, ultrahigh-sensitivity chemical sensor is provided that allows etection through utilization of a small, extremely low-loss, monolithic optical cavity. The cavity is fabricated from highly transparent optical material in the shape of a regular polygon with one or more convex facets to form a stable resonator for ray trajectories sustained by total internal reflection. Optical radiation enters and exits the monolithic cavity by photon tunneling in which two totally reflecting surfaces are brought into close proximity. In the presence of absorbing material, the loss per pass is increased since the evanescent waves that exist exterior to the cavity at points where the circulating pulse is totally reflected, are absorbed. The decay rate of an injected pulse is determined by coupling out an infinitesimal fraction of the pulse to produce an intensity-versus-time decay curve. Since the change in the decay rate resulting from absorption is inversely proportional to the magnitude of absorption, a quantitative sensor of concentration or absorption cross-section with 1 part-per-million/pass or better sensitivity is obtained. The broadband nature of total internal reflection permits a single device to be used over a broad wavelength range. The absorption spectrum of the surrounding medium can thereby be obtained as a measurement of inverse decay time as a function of wavelength.

  5. Implementation of solar-reflective surfaces: Materials and utility programs

    SciTech Connect (OSTI)

    Bretz, S.; Akbari, H.; Rosenfeld, A.; Taha, H.

    1992-06-01

    This report focuses on implementation issues for using solar-reflective surfaces to cool urban heat islands, with specific examples for Sacramento, California. Advantages of solar-reflective surfaces for reducing energy use are: (1) they are cost-effective if albedo is increased during routine maintenance; (2) the energy savings coincide with peak demand for power; (3) there are positive effects on environmental quality; and (4) the white materials have a long service life. Important considerations when choosing materials for mitigating heat islands are identified as albedo, emissivity, durability, cost, pollution and appearance. There is a potential for increasing urban albedo in Sacramento by an additional 18%. Of residential roofs, we estimate that asphalt shingle and modified bitumen cover the largest area, and that built-up roofing and modified bitumen cover the largest area of commercial buildings. For all of these roof types, albedo may be increased at the time of re-roofing without any additional cost. When a roof is repaired, a solar-reflective roof coating may be applied to significantly increase albedo and extend the life of the root Although a coating may be cost-effective if applied to a new roof following installation or to an older roof following repair, it is not cost-effective if the coating is applied only to save energy. Solar-reflective pavement may be cost-effective if the albedo change is included in the routine resurfacing schedule. Cost-effective options for producing light-colored pavement may include: (1) asphalt concrete, if white aggregate is locally available; (2) concrete overlays; and (3) newly developed white binders and aggregate. Another option may be hot-rolled asphalt, with white chippings. Utilities could promote solar-reflective surfaces through advertisement, educational programs and cost-sharing of road resurfacing.

  6. Method and apparatus for inspecting reflection masks for defects

    DOE Patents [OSTI]

    Bokor, Jeffrey; Lin, Yun

    2003-04-29

    An at-wavelength system for extreme ultraviolet lithography mask blank defect detection is provided. When a focused beam of wavelength 13 nm is incident on a defective region of a mask blank, three possible phenomena can occur. The defect will induce an intensity reduction in the specularly reflected beam, scatter incoming photons into an off-specular direction, and change the amplitude and phase of the electric field at the surface which can be monitored through the change in the photoemission current. The magnitude of these changes will depend on the incident beam size, and the nature, extent and size of the defect. Inspection of the mask blank is performed by scanning the mask blank with 13 nm light focused to a spot a few .mu.m in diameter, while measuring the reflected beam intensity (bright field detection), the scattered beam intensity (dark-field detection) and/or the change in the photoemission current.

  7. Improved Method to Measure Glare and Reflected Solar Irradiance - Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovation Portal Solar Thermal Solar Thermal Industrial Technologies Industrial Technologies Energy Analysis Energy Analysis Early Stage R&D Early Stage R&D Find More Like This Return to Search Improved Method to Measure Glare and Reflected Solar Irradiance Sandia National Laboratories Contact SNL About This Technology Publications: PDF Document Publication Market Sheet (767 KB) Solar glare from aerial view Solar glare from aerial view Typical solar glare Typical solar glare

  8. Multiple-channel, total-reflection optic with controllable divergence

    DOE Patents [OSTI]

    Gibson, D.M.; Downing, R.G.

    1997-02-18

    An apparatus and method for providing focused x-ray, gamma-ray, charged particle and neutral particle, including neutron, radiation beams with a controllable amount of divergence are disclosed. The apparatus features a novel use of a radiation blocking structure, which, when combined with multiple-channel total reflection optics, increases the versatility of the optics by providing user-controlled output-beam divergence. 11 figs.

  9. Multiple-channel, total-reflection optic with controllable divergence

    DOE Patents [OSTI]

    Gibson, David M.; Downing, Robert G.

    1997-01-01

    An apparatus and method for providing focused x-ray, gamma-ray, charged particle and neutral particle, including neutron, radiation beams with a controllable amount of divergence are disclosed. The apparatus features a novel use of a radiation blocking structure, which, when combined with multiple-channel total reflection optics, increases the versatility of the optics by providing user-controlled output-beam divergence.

  10. Ultrafast transient reflectance of epitaxial semiconducting perovskite thin films

    SciTech Connect (OSTI)

    Smolin, S. Y.; Guglietta, G. W.; Baxter, J. B. E-mail: smay@coe.drexel.edu; Scafetta, M. D.; May, S. J. E-mail: smay@coe.drexel.edu

    2014-07-14

    Ultrafast pump-probe transient reflectance (TR) spectroscopy was used to study carrier dynamics in an epitaxial perovskite oxide thin film of LaFeO{sub 3} (LFO) with a thickness of 40 unit cells (16?nm) grown by molecular beam epitaxy on (LaAlO{sub 3}){sub 0.3}(Sr{sub 2}AlTaO{sub 6}){sub 0.7} (LSAT). TR spectroscopy shows two negative transients in reflectance with local maxima at ?2.5?eV and ?3.5?eV which correspond to two optical transitions in LFO as determined by ellipsometry. The kinetics at these transients were best fit with an exponential decay model with fast (540 ps), medium (?200 ps), and slow (??3?ns) components that we attribute mainly to recombination of photoexcited carriers. Moreover, these reflectance transients did not completely decay within the observable time window, indicating that ?10% of photoexcited carriers exist for at least 3?ns. This work illustrates that TR spectroscopy can be performed on thin (<20?nm) epitaxial oxide films to provide a quantitative understanding of recombination lifetimes, which are important parameters for the potential utilization of perovskite films in photovoltaic and photocatalytic applications.

  11. Reflection seismic mapping of an abandoned coal mine, Belleville, Illinois

    SciTech Connect (OSTI)

    Anderson, N.; Hinds, R.; Roark, M.

    1997-10-01

    Old mine location maps (1958 vintage) indicate that the northwestern part of an undeveloped property near the town of Belleville, St. Clair County, Illinois, is situated above an abandoned and now water-filled, room-and-pillar type coal mine. The central and southeast parts of the Belleville property are shown as overlying intact (non-mined) coal. The coal unit mined at the Belleville site, the Herrin No. 6 is Pennsylvanian in age and about 2.5 m thick at a depth of around 40 m. The current owners of the Belleville property want to construct a large building on the central and southeast parts of the site, but have been concerned about the accuracy of the old mine location maps because of recent mine-related surface subsidence in areas designated on the maps as not mined. To ensure that the proposed new development is located on structurally stable ground, a grid of ten high-resolution reflection seismic lines was acquired on-site. On these reflection seismic data, mined-out areas can be visually identified and differentiated from non-mined areas. The interpretation of the reflection seismic data was constrained and validated by 15 test boreholes. These seismic and borehole data confirm that the central and southeast parts of the property have not been mined extensively. Development of the Belleville site has proceeded with confidence.

  12. Inversion of seismic reflection traveltimes using a nonlinear optimization scheme

    SciTech Connect (OSTI)

    Pullammanappallil, S.K.; Louie, J.N. (Univ. of Nevada, Reno, NV (United States). Mackay School of Mines)

    1993-11-01

    The authors present the use of a nonlinear optimization scheme called generalized simulated annealing to invert seismic reflection times for velocities, reflector depths, and lengths. A finite-difference solution of the eikonal equation computes reflection traveltimes through the velocity model and avoids ray tracing. They test the optimization scheme on synthetic models and compare it with results from a linearized inversion. The synthetic tests illustrate that, unlike linear inversion schemes, the results obtained by the optimization scheme are independent of the initial model. The annealing method has the ability to produce a suite of models that satisfy the data equally well. They make use of this property to determine the uncertainties associated with the model parameters obtained. Synthetic examples demonstrate that allowing the reflector length to vary, along with its position, helps the optimization process obtain a better solution. The authors put this to use in imaging the Garlock fault, whose geometry at depth is poorly known. They use reflection times picked from shot gathers recorded along COCORP Mojave Line 5 to invert for the Garlock fault and velocities within the Cantil Basin below Fremont Valley, California. The velocities within the basin obtained by their optimization scheme are consistent with earlier studies, though their results suggest that the basin might extend 1--2 km further south. The reconstructed reflector seems to suggest shallowing of the dip of the Garlock fault at depth.

  13. Y-12 National Security Complex's Sustainable Recovery and Transformation - 12420

    SciTech Connect (OSTI)

    Jackson, Jan; Widman, Jeannette

    2012-07-01

    wastes and facilitated the evaluation of all unneeded materials for reuse or recycling. The site's pervasive pollution prevention culture is reflected in the recycling or reuse of over 1.3 million pounds of materials by the ARRA project teams. While the disposal of a large volume of ARRA wastes could not be avoided, the projects were able to reduce the local and national impacts of waste transportation and disposal through careful planning and efficient execution. The site has conserved natural resources through the preservation and beneficial reuse of materials and land cleared by ARRA activities. Y-12 has taken steps to preserve its history as the site undergoes a sustainable and safe transformation for the future. (authors)

  14. Fresnel reflection from a cavity with net roundtrip gain

    SciTech Connect (OSTI)

    Mansuripur, Tobias S.; Mansuripur, Masud

    2014-03-24

    A planewave incident on an active etalon with net roundtrip gain may be expected to diverge in field amplitude, yet applying the Fresnel formalism to Maxwell's equations admits a convergent solution. We describe this solution mathematically and provide additional insight by demonstrating the response of such a cavity to an incident beam of light. Cavities with net roundtrip gain have often been overlooked in the literature, and a clear understanding of their behavior yields insight to negative refraction in nonmagnetic media, a duality between loss and gain, amplified total internal reflection, and the negative-index lens.

  15. Polarization Studies of Resonant Forbidden Reflections in Liquid Crystals

    SciTech Connect (OSTI)

    Fernandes, P.; Barois, P.; Nguyen, H. T.; Wang, S. T.; Liu, Z. Q.; McCoy, B. K.; Huang, C. C.; Pindak, R.; Caliebe, W.

    2007-11-30

    We report the results of resonant x-ray diffraction experiments performed on thick films of a biaxial liquid crystal made of achiral bent-core molecules. Polarization properties of forbidden reflections are observed as a function of the sample rotation angle {phi} about the scattering vector Q for the first time on a fluid material. The experimental data are successfully analyzed within a tensor structure factor model by taking the nonperfect alignment of the liquid crystal into account. The local structure of the B{sub 2} mesophase is hence determined to be SmC{sub S}P{sub A}.

  16. Benchmark Evaluation of Plutonium Hemispheres Reflected by Steel and Oil

    SciTech Connect (OSTI)

    John Darrell Bess

    2008-06-01

    During the period from June 1967 through September 1969 a series of critical experiments was performed at the Rocky Flats Critical Mass Laboratory with spherical and hemispherical plutonium assemblies as nested hemishells as part of a Nuclear Safety Facility Experimental Program to evaluate operational safety margins for the Rocky Flats Plant. These assemblies were both bare and fully or partially oil-reflected. Many of these experiments were subcritical with an extrapolation to critical configurations or critical at a particular oil height. Existing records reveal that 167 experiments were performed over the course of 28 months. Unfortunately, much of the data was not recorded. A reevaluation of the experiments had been summarized in a report for future experimental and computational analyses. This report examines only fifteen partially oil-reflected hemispherical assemblies. Fourteen of these assemblies also had close-fitting stainless-steel hemishell reflectors, used to determine the effective critical reflector height of oil with varying steel-reflector thickness. The experiments and their uncertainty in keff values were evaluated to determine their potential as valid criticality benchmark experiments of plutonium.

  17. Progress toward achieving a commercially viable solar reflective material

    SciTech Connect (OSTI)

    Kennedy, C.E.; Smilgys, R.V. |

    1998-06-01

    Solar thermal technologies use large mirrors to concentrate sunlight for renewable power generation. The development of advanced reflector materials is important to the viability of electricity production by solar thermal energy systems. The reflector materials must be low in cost and maintain high specular reflectance for extended lifetimes under severe outdoor environments. Production processes associated with candidate materials must be scalable to mass production techniques. A promising low-cost construction uses a stainless steel foil substrate with a silver reflective layer protected by an optically transparent oxide topcoat. Thick (2 to 4 micron), dense alumina coatings provide durable protective layers. The excellent performance of alumina-coated reflector materials in outdoor and accelerated testing suggests that a larger field trial of the material is warranted. The key to producing a greater quantity of material for field deployment and testing without incurring substantial capital is the use of a chilled drum coater. An existing chamber is being modified, and the deposition rate will be increased prior to the installation of a drum coater to produce 1-ft wide by 10-ft long strips of solar reflector material. The production and performance of these materials are discussed.

  18. Diffuse reflectance FTIR of stains on grit blasted metals

    SciTech Connect (OSTI)

    Powell, G.L.; Hallman, R.L. Jr.; Cox, R.L.

    1997-08-09

    Diffuse reflectance mid-infrared Fourier transform (DRIFT) spectroscopy has been applied to the detection of oil contamination on grit-blasted metals. The object of this application is to detect and discriminate between silicone and hydrocarbon oil contamination at levels approaching 10 mg/m{sup 2}. A portable FTIR spectrometer with dedicated diffuse reflectance optics was developed for this purpose. Using translation devices positioned by instructions from the spectrometer operating system, images of macroscopic substrates were produced with millimeter spatial resolution. The pixels that comprise an image are each a full mid-infrared spectrum with excellent signal-to-noise, each determined as individual files and uniquely saved to disc. Reduced spectra amplitudes, based on peak height, area, or other chemometric techniques, mapped as a function of the spatial coordinates of the pixel are used to display the image. This paper demonstrates the application of the technique to the analysis of stains on grit-blasted metals, including the calibration of the method, the inspection of substrates, and the migration of oil contamination.

  19. Improving experimental phases for strong reflections prior to density modification

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Uervirojnangkoorn, Monarin; Hilgenfeld, Rolf; Terwilliger, Thomas C.; Read, Randy J.

    2013-09-20

    Experimental phasing of diffraction data from macromolecular crystals involves deriving phase probability distributions. These distributions are often bimodal, making their weighted average, the centroid phase, improbable, so that electron-density maps computed using centroid phases are often non-interpretable. Density modification brings in information about the characteristics of electron density in protein crystals. In successful cases, this allows a choice between the modes in the phase probability distributions, and the maps can cross the borderline between non-interpretable and interpretable. Based on the suggestions by Vekhter [Vekhter (2005), Acta Cryst. D61, 899–902], the impact of identifying optimized phases for a small number ofmore » strong reflections prior to the density-modification process was investigated while using the centroid phase as a starting point for the remaining reflections. A genetic algorithm was developed that optimizes the quality of such phases using the skewness of the density map as a target function. Phases optimized in this way are then used in density modification. In most of the tests, the resulting maps were of higher quality than maps generated from the original centroid phases. In one of the test cases, the new method sufficiently improved a marginal set of experimental SAD phases to enable successful map interpretation. Lastly, a computer program,SISA, has been developed to apply this method for phase improvement in macromolecular crystallography.« less

  20. Reduction in Vehicle Temperatures and Fuel Use from Cabin Ventilation, Solar-Reflective Paint, and a New Solar-Reflective Glazing

    SciTech Connect (OSTI)

    Rugh, J.; Chaney, L.; Meyer, J.; Rustagi, M.; Olson, K.; Kogler, R.

    2007-05-01

    An analysis to determine the impact of reducing the thermal load on a vehicle using solar-reflective paint and glazing.

  1. V-142: Oracle Java Reflection API Flaw Lets Remote Users Execute...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2: Oracle Java Reflection API Flaw Lets Remote Users Execute Arbitrary Code V-142: Oracle Java Reflection API Flaw Lets Remote Users Execute Arbitrary Code April 25, 2013 - 12:14am...

  2. Reflecting the Revised PM 2.5 National Ambient Air Quality Standard...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reflecting the Revised PM 2.5 National Ambient Air Quality Standard in NEPA Evaluations Reflecting the Revised PM 2.5 National Ambient Air Quality Standard in NEPA Evaluations This...

  3. Reflectivity studies on adsorbed block copolymers under shear

    SciTech Connect (OSTI)

    Smith, G.S.; Wages, S.; Baker, S.M.; Toprakcioglu, C.; Hadziioannou, G.

    1994-12-01

    The authors report neutron reflectivity data on (poly)styrene-(poly)ethylene oxide (PS-PEO) diblock copolymers adsorbed onto quartz from the selective solvent cyclohexane (a non-solvent for PEO and a poor solvent for PS). The PEO ``anchor block`` adsorbs strongly to form a thin layer on the quartz substrate, while the deuterated PS chains dangle into the solvent. They find that under static conditions the density profile of the PS block in a poor solvent can be well described by a Schultz function which is indicative of a polymer ``mushroom.`` Furthermore, they have studied the same system under shear at shear rates from 0--400s{sup {minus}1}. They find that there is a dramatic increase in the thickness of the PS layer under shear in cyclohexane and that the relaxation time from the shear-on profile back to the static profile is on the order of several days.

  4. Method of fabricating reflection-mode EUV diffusers

    DOE Patents [OSTI]

    Anderson, Erik; Naulleau, Patrick P.

    2005-03-01

    Techniques for fabricating well-controlled, random relief, engineered surfaces that serve as substrates for EUV optical devices are accomplished with grayscale exposure. The method of fabricating a multilevel EUV optical element includes: (a) providing a substrate; (b) depositing a layer of curable material on a surface of the substrate; (c) creating a relief profile in a layer of cured material from the layer of curable material wherein the relief profile comprises multiple levels of cured material that has a defined contour; and (d) depositing a multilayer reflection film over the relief profile wherein the film has an outer contour that substantially matches that of the relief profile. The curable material can comprise photoresist or a low dielectric constant material.

  5. Aberration-free, all-reflective laser pulse stretcher

    DOE Patents [OSTI]

    Perry, Michael D.; Banks, Paul S.; Stuart, Brent C.; Fochs, Scott N.

    1999-09-28

    An all-reflective pulse stretcher for laser systems employing chirped-pulse amplification enables on-axis use of the focusing mirror which results in ease of use, significantly decreased sensitivity to alignment and near aberration-free performance. By using a new type of diffraction grating which contains a mirror incorporated into the grating, the stretcher contains only three elements: 1) the grating, 2) a spherical or parabolic focusing mirror, and 3) a flat mirror. Addition of a fourth component, a retro-reflector, enables multiple passes of the same stretcher resulting in stretching ratios beyond the current state of the art in a simple and compact design. The pulse stretcher has been used to stretch pulses from 20 fsec to over 600 psec (a stretching ratio in excess of 30,000).

  6. Copper-assisted, anti-reflection etching of silicon surfaces

    DOE Patents [OSTI]

    Toor, Fatima; Branz, Howard

    2014-08-26

    A method (300) for etching a silicon surface (116) to reduce reflectivity. The method (300) includes electroless deposition of copper nanoparticles about 20 nanometers in size on the silicon surface (116), with a particle-to-particle spacing of 3 to 8 nanometers. The method (300) includes positioning (310) the substrate (112) with a silicon surface (116) into a vessel (122). The vessel (122) is filled (340) with a volume of an etching solution (124) so as to cover the silicon surface (116). The etching solution (124) includes an oxidant-etchant solution (146), e.g., an aqueous solution of hydrofluoric acid and hydrogen peroxide. The silicon surface (116) is etched (350) by agitating the etching solution (124) with, for example, ultrasonic agitation, and the etching may include heating (360) the etching solution (124) and directing light (365) onto the silicon surface (116). During the etching, copper nanoparticles enhance or drive the etching process.

  7. Volume Reflection of a Proton Beam in a Bent Crystal

    SciTech Connect (OSTI)

    Ivanov, Yu. M.; Petrunin, A. A.; Skorobogatov, V. V.; Gavrikov, Yu. A.; Gelamkov, A. V.; Lapina, L. P.; Schetkovsky, A. I.; Vavilov, S. A.; Baranov, V. I.; Chesnokov, Yu. A.; Afonin, A. G.; Baranov, V. T.; Chepegin, V. N.; Guidi, V.; Vomiero, A.

    2006-10-06

    Volume reflection predicted in the mid-1980s by Taratin and Vorobiev has been observed for the first time in the interactions of a 70 GeV proton beam with a short bent crystal. Incident protons deviate from convex atomic planes in the bulk of the crystal as a result of coherent interaction with bent lattice around the tangency point of particle trajectory with a curved atomic plane. The deflection angle 2{theta}{sub R} was found to be (39.5{+-}2.0) {mu}rad, or (1.65{+-}0.08){theta}{sub c} in terms of the critical angle for channeling. The process has a large probability with respect to channeling and takes place in the angular range equal to the bend angle of atomic planes. It could possibly open new fields of application of crystals in high-energy particle beam optics.

  8. All-reflective optical target illumination system with high numerical aperture

    DOE Patents [OSTI]

    Thomas, Carlton E.; Sigler, Robert D.; Hoeger, John G.

    1979-01-01

    An all-reflective optical system for providing illumination of a target focal region at high numerical aperture from a pair of confluent collimated light beams. The collimated beams are each incident upon an associated concave eccentric pupil paraboloidal reflective surface, and thereby each focused through an opening in an associated outer ellipsoidal reflective surface onto a plane reflector. Each beam is reflected by its associated plane reflector onto the opposing concave surface of the outer ellipsoids to be focused through an opening in the plane surface onto an opposing inner concave ellipsoidal reflective surface, and thence onto the target region.

  9. DESIGN AND CONSTRUCTION OF A FORCE-REFLECTING TELEOPERATION SYSTEM

    SciTech Connect (OSTI)

    M.A. Ebadian, Ph.D.

    1999-01-01

    For certain applications, such as space servicing, undersea operations, and hazardous material handling tasks in nuclear reactors, the environments can be uncertain, complex, and hazardous. Lives may be in danger if humans were to work under these conditions. As a result, a man-machine system--a teleoperator system--has been developed to work in these types of environments. In a typical teleoperator system, the actual system operates at a remote site; the operator located away from this system usually receives visual information from a video image and/or graphical animation on the computer screen. Additional feedback, such as aural and force information, can significantly enhance performance of the system. Force reflection is a type of feedback in which forces experienced by the remote manipulator are fed back to the manual controller. Various control methods have been proposed for implementation on a teleoperator system. In order to examine different control schemes, a one Degree-Of-Freedom (DOF) Force-Reflecting Manual Controller (FRMC) is constructed and integrated into a PC. The system parameters are identified and constructed as a mathematical model. The Proportional-Integral-Derivative (PID) and fuzzy logic controllers are developed and tested experimentally. Numerical simulation results obtained from the mathematical model are compared with those of experimental data for both types of controllers. In addition, the concept of a telesensation system is introduced. A telesensation system is an advanced teleoperator system that attempts to provide the operator with sensory feedback. In this context, a telesensation system integrates the use of a Virtual Reality (VR) unit, FRMC, and Graphical User Interface (GUI). The VR unit is used to provide the operator with a 3-D visual effect. Various commercial VR units are reviewed and features compared for use in a telesensation system. As for the FRMC, the conceptual design of a 3-DOF FRMC is developed in an effort to

  10. Shape error analysis for reflective nano focusing optics

    SciTech Connect (OSTI)

    Modi, Mohammed H.; Idir, Mourad

    2010-06-23

    Focusing performance of reflective x-ray optics is determined by surface figure accuracy. Any surface imperfection present on such optics introduces a phase error in the outgoing wave fields. Therefore converging beam at the focal spot will differ from the desired performance. Effect of these errors on focusing performance can be calculated by wave optical approach considering a coherent wave field illumination of optical elements. We have developed a wave optics simulator using Fresnel-Kirchhoff diffraction integral to calculate the mirror pupil function. Both analytically calculated and measured surface topography data can be taken as an aberration source to outgoing wave fields. Simulations are performed to study the effect of surface height fluctuations on focusing performances over wide frequency range in high, mid and low frequency band. The results using real shape profile measured with long trace profilometer (LTP) suggest that the shape error of {lambda}/4 PV (peak to valley) is tolerable to achieve diffraction limited performance. It is desirable to remove shape error of very low frequency as 0.1 mm{sup -1} which otherwise will generate beam waist or satellite peaks. All other frequencies above this limit will not affect the focused beam profile but only caused a loss in intensity.

  11. Criticality Benchmark Analysis of Water-Reflected Uranium Oxyfluoride Slabs

    SciTech Connect (OSTI)

    Margaret A. Marshall; John D. Bess

    2009-11-01

    A series of twelve experiments were conducted in the mid 1950's at the Oak Ridge National Laboratory Critical Experiments Facility to determine the critical conditions of a semi-infinite water-reflected slab of aqueous uranium oxyfluoride (UO2F2). A different slab thickness was used for each experiment. Results from the twelve experiment recorded in the laboratory notebook were published in Reference 1. Seven of the twelve experiments were determined to be acceptable benchmark experiments for the inclusion in the International Handbook of Evaluated Criticality Safety Benchmark Experiments. This evaluation will not only be available to handbook users for the validation of computer codes and integral cross-section data, but also for the reevaluation of experimental data used in the ANSI/ANS-8.1 standard. This evaluation is important as part of the technical basis of the subcritical slab limits in ANSI/ANS-8.1. The original publication of the experimental results was used for the determination of bias and bias uncertainties for subcritical slab limits, as documented by Hugh Clark's paper 'Subcritical Limits for Uranium-235 Systems'.

  12. Water-Moderated and -Reflected Slabs of Uranium Oxyfluoride

    SciTech Connect (OSTI)

    Margaret A. Marshall; John D. Bess; J. Blair Briggs; Clinton Gross

    2010-09-01

    A series of ten experiments were conducted at the Oak Ridge National Laboratory Critical Experiment Facility in December 1955, and January 1956, in an attempt to determine critical conditions for a slab of aqueous uranium oxyfluoride (UO2F2). These experiments were recorded in an Oak Ridge Critical Experiments Logbook and results were published in a journal of the American Nuclear Society, Nuclear Science and Engineering, by J. K. Fox, L. W. Gilley, and J. H. Marable (Reference 1). The purpose of these experiments was to obtain the minimum critical thickness of an effectively infinite slab of UO2F2 solution by extrapolation of experimental data. To do this the slab thickness was varied and critical solution and water-reflector heights were measured using two different fuel solutions. Of the ten conducted experiments eight of the experiments reached critical conditions but the results of only six of the experiments were published in Reference 1. All ten experiments were evaluated from which five critical configurations were judged as acceptable criticality safety benchmarks. The total uncertainty in the acceptable benchmarks is between 0.25 and 0.33 % ?k/keff. UO2F2 fuel is also evaluated in HEU-SOL-THERM-043, HEU-SOL-THERM-011, and HEU-SOL-THERM-012, but these those evaluation reports are for large reflected and unreflected spheres. Aluminum cylinders of UO2F2 are evaluated in HEU-SOL-THERM-050.

  13. Three-dimensional light trap for reflective particles

    DOE Patents [OSTI]

    Neal, Daniel R.

    1999-01-01

    A system for containing either a reflective particle or a particle having an index of refraction lower than that of the surrounding media in a three-dimensional light cage. A light beam from a single source illuminates an optics system and generates a set of at least three discrete focussed beams that emanate from a single exit aperture and focus on to a focal plane located close to the particle. The set of focal spots defines a ring that surrounds the particle. The set of focussed beams creates a "light cage" and circumscribes a zone of no light within which the particle lies. The surrounding beams apply constraining forces (created by radiation pressure) to the particle, thereby containing it in a three-dimensional force field trap. A diffractive element, such as an aperture multiplexed lens, or either a Dammann grating or phase element in combination with a focusing lens, may be used to generate the beams. A zoom lens may be used to adjust the size of the light cage, permitting particles of various sizes to be captured and contained.

  14. Three-dimensional light trap for reflective particles

    DOE Patents [OSTI]

    Neal, D.R.

    1999-08-17

    A system is disclosed for containing either a reflective particle or a particle having an index of refraction lower than that of the surrounding media in a three-dimensional light cage. A light beam from a single source illuminates an optics system and generates a set of at least three discrete focused beams that emanate from a single exit aperture and focus on to a focal plane located close to the particle. The set of focal spots defines a ring that surrounds the particle. The set of focused beams creates a ``light cage`` and circumscribes a zone of no light within which the particle lies. The surrounding beams apply constraining forces (created by radiation pressure) to the particle, thereby containing it in a three-dimensional force field trap. A diffractive element, such as an aperture multiplexed lens, or either a Dammann grating or phase element in combination with a focusing lens, may be used to generate the beams. A zoom lens may be used to adjust the size of the light cage, permitting particles of various sizes to be captured and contained. 10 figs.

  15. Phase coherence and Andreev reflection in topological insulator devices

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Finck, A. D. K.; Kurter, C.; Hor, Y. S.; Van Harlingen, D. J.

    2014-11-04

    Topological insulators (TIs) have attracted immense interest because they host helical surface states. Protected by time-reversal symmetry, they are robust to nonmagnetic disorder. When superconductivity is induced in these helical states, they are predicted to emulate p-wave pairing symmetry, with Majorana states bound to vortices. Majorana bound states possess non-Abelian exchange statistics that can be probed through interferometry. Here, we take a significant step towards Majorana interferometry by observing pronounced Fabry-Pérot oscillations in a TI sandwiched between a superconducting and a normal lead. For energies below the superconducting gap, we observe a doubling in the frequency of the oscillations, arisingmore » from an additional phase from Andreev reflection. When a magnetic field is applied perpendicular to the TI surface, a number of very sharp and gate-tunable conductance peaks appear at or near zero energy, which has consequences for interpreting spectroscopic probes of Majorana fermions. Our results show that TIs are a promising platform for exploring phase-coherent transport in a solid-state system.« less

  16. Phase coherence and Andreev reflection in topological insulator devices

    SciTech Connect (OSTI)

    Finck, A. D. K.; Kurter, C.; Hor, Y. S.; Van Harlingen, D. J.

    2014-11-04

    Topological insulators (TIs) have attracted immense interest because they host helical surface states. Protected by time-reversal symmetry, they are robust to nonmagnetic disorder. When superconductivity is induced in these helical states, they are predicted to emulate p-wave pairing symmetry, with Majorana states bound to vortices. Majorana bound states possess non-Abelian exchange statistics that can be probed through interferometry. Here, we take a significant step towards Majorana interferometry by observing pronounced Fabry-Pérot oscillations in a TI sandwiched between a superconducting and a normal lead. For energies below the superconducting gap, we observe a doubling in the frequency of the oscillations, arising from an additional phase from Andreev reflection. When a magnetic field is applied perpendicular to the TI surface, a number of very sharp and gate-tunable conductance peaks appear at or near zero energy, which has consequences for interpreting spectroscopic probes of Majorana fermions. Our results show that TIs are a promising platform for exploring phase-coherent transport in a solid-state system.

  17. Soliton reflection in magnetized plasma: Effect of ion temperature and nonisothermal electrons

    SciTech Connect (OSTI)

    Malik, Hitendra K.

    2008-07-15

    Reflection of solitons in magnetized inhomogeneous plasma is studied theoretically under the effect of ion temperature and low temperature nonisothermal electrons. The effect of ion temperature is to enhance (reduce) the amplitude (width) of the incident and reflected solitons, and this effect is more prominent in the case of a large number of nonisothermal electrons. The solitons are downshifted after the reflection and the stronger reflection is achieved when the ions of lower temperature and nonisothermal electrons with larger concentration are present in the plasma. The solitons shift more after the reflection for higher ion and electron temperatures, large concentration of the electrons, but the shift becomes smaller in the presence of stronger magnetic field. Both the incident and reflected solitons evolve with higher amplitudes if the temperature of nonisothermal electrons is raised, but the solitons are reflected weakly under this situation. The effect of magnetic field is to reduce the amplitudes of both the solitons, and the reduction in the amplitude of reflected soliton is at a faster rate, due to which the soliton reflection gets weaker. The magnetic field affects soliton reflection more significantly when it is applied at a larger angle with the direction of wave propagation.

  18. Recovery Newsletters | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Newsletters Recovery Newsletters RSS October 1, 2011 2011 ARRA Newsletters December 1, 2010 2010 ARRA Newsletters November 1, 2009 2009 ARRA Newsletters

  19. Doubles counting of highly multiplying items in reflective surroundings

    SciTech Connect (OSTI)

    Croft, Stephen; Evans, Louise G; Schear, Melissa A; Tobin, Stephen J

    2010-11-18

    When a neutrons are counted from a spontaneously fissile multiplying item in a reflecting environment the temporal behavior of the correlated signal following neutron birth is complex. At early times the signal is dominated by prompt fission events coming from spontaneous fission bursts and also from prompt fast-neutron induced fission events. At later times neutrons 'returning' from the surroundings induce fission and give rise to an additional chain of correlated events. The prompt and returning components probe the fissile and fertile constituents of the item in different ways and it is potentially beneficial to exploit this fact. In this work we look at how the two components can be represented using a linear combination of two simple functions. Fitting of the composite function to the capture time distribution represents one way of quantifying the proportion of each contribution. Another approach however is to use a dual shift register analysis where after each triggering event two coincidence gates are opened, one close to the trigger that responds preferentially to the prompt dynamics and one later in time which is more sensitive to the returning neutron induced events. To decide on the best gate positions and gate widths and also to estimate the counting precision we can use the analytical fit to work out the necessary gate utilization factors which are required in both these calculations. In this work, we develop the approach. Illustrative examples are given using spent Low Enriched Uranium (LEU) Pressurized light Water Reactor (LWR) fuel assemblies submersed in borated water and counted in a ring of {sup 3}He gas-filled proportional counters. In this case the prompt component is dominated by {sup 244}Cm spontaneous fission and induced fast neutron fission in for example {sup 238}U while the returning low energy neutrons induce fission mainly in the fissile nuclides such as {sup 239}Pu, {sup 241}Pu and {sup 235}U. One requirement is to calculate the Random

  20. CONCRETE REFLECTED ARRAYS OF U(93.2) METAL

    SciTech Connect (OSTI)

    Mackenzie Gorham; John D. Bess; J. Blair Briggs; Virginia Dean; Davis Reed

    2010-09-01

    During the period from 1963 1973, experiments involving highly enriched uranium units were performed at the Oak Ridge National Laboratory Critical Experiments Facility to determine various critical configurations of three-dimensional arrays. The experiments formed a four-part series, and were reported by several different experimenters; the results of interest for this evaluation are those reported for the fourth experimentation, Critical Three-Dimensional Arrays of Neutron Interacting Units: Part IV, published and performed by D.W.Magnuson (Ref 1). Information is also available in the logbook . This set of experiments utilized subcritical metal units on a split table apparatus to determine critical configurations for 222 arrangements of highly enriched uranium reflected by concrete. Magnuson manipulated the configuration of several uranium cylinders and blocks within a concrete reflector. The different permutations utilized uranium cylinders of two different heights in various positions in the three dimensional array; certain cases also placed thin uranium blocks on top of the cylinders. The thickness of the surrounding concrete, as well as the inner dimensions of the concrete reflector was also varied in certain cases. The variations resulted in fourteen different experimental permutations or configurations. All fourteen configurations were judged to be unacceptable for use as criticality safety benchmarks. All experiments were initially evaluated; however only three configurations were evaluated in detail. Configurations 2, 4, 6 and 12 were not evaluated in detail because they are subcritical and configurations 5, 7, 8, 9, and 10 were also were not evaluated in detail because they were supercritical by more than beta effective (~0.007), or prompt critical. The experiments evaluated in detail for this benchmark were configurations 1, 3, and 11. The experimental report also contains the information for HEU-MET-FAST-056. Closely related work has been recorded

  1. Reflection Survey At Fish Lake Valley Area (DOE GTP) | Open Energy...

    Open Energy Info (EERE)

    Fish Lake Valley Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Reflection Survey At Fish Lake Valley Area (DOE GTP) Exploration...

  2. Coincident P and Sh reflections from basement rocks at Coso geothermal...

    Open Energy Info (EERE)

    is being done to improve the statics, velocities, signal character, and migrated signal positions. The main targets of the profiles were (1) exploring the reflection...

  3. Reflection Survey At Soda Lake Area (DOE GTP) | Open Energy Informatio...

    Open Energy Info (EERE)

    Soda Lake Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Reflection Survey At Soda Lake Area (DOE GTP) Exploration Activity...

  4. Reflection Survey At Rye Patch Area (DOE GTP, 2011) | Open Energy...

    Open Energy Info (EERE)

    DOE GTP, 2011) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Reflection Survey At Rye Patch Area (DOE GTP, 2011) Exploration Activity Details...

  5. Reflection Survey At Hot Pot Area (DOE GTP) | Open Energy Information

    Open Energy Info (EERE)

    Hot Pot Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Reflection Survey At Hot Pot Area (DOE GTP) Exploration Activity Details...

  6. Reflection Survey At New River Area (DOE GTP) | Open Energy Informatio...

    Open Energy Info (EERE)

    New River Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Reflection Survey At New River Area (DOE GTP) Exploration Activity...

  7. Soliton propagation, reflection, and transmission in an inhomogeneous plasma with trapped electrons

    SciTech Connect (OSTI)

    Aziz, Farah; Malik, Hitendra K.; Stroth, Ulrich

    2011-04-15

    Transmission and reflection of solitons from a semitransparent grid in an inhomogeneous plasma in the presence of trapped electrons is studied analytically. Conditions are obtained for the obliqueness of the propagation and the drift velocity of ions for the soliton transmission and reflection. Also, a transmission-reflection conservation law is derived. The contribution of trapped electrons to the solitons' propagation and their reflection and transmission is examined through energy, amplitude, and width of the solitons, in addition to the effect of temperature and drift of the ions.

  8. NREL and SkyFuel Partnership Reflects Bright Future for Solar...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Thermal Solar Thermal Return to Search NREL and SkyFuel Partnership Reflects Bright Future for Solar Energy National Renewable Energy Laboratory Success Story Details Partner ...

  9. New Sandia Mirror Isn't Shiny: Instead It Reflects Infrared Light...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... New Sandia Mirror Isn't Shiny: Instead It Reflects Infrared Light Using a Metamaterial HomeCapabilities, Materials Science, News, News & Events, Research & CapabilitiesNew ...

  10. Reflection mass spectrometry technique for monitoring and controlling composition during molecular beam epitaxy

    DOE Patents [OSTI]

    Brennan, T.M.; Hammons, B.E.; Tsao, J.Y.

    1992-12-15

    A method for on-line accurate monitoring and precise control of molecular beam epitaxial growth of Groups III-III-V or Groups III-V-V layers in an advanced semiconductor device incorporates reflection mass spectrometry. The reflection mass spectrometry is responsive to intentional perturbations in molecular fluxes incident on a substrate by accurately measuring the molecular fluxes reflected from the substrate. The reflected flux is extremely sensitive to the state of the growing surface and the measurements obtained enable control of newly forming surfaces that are dynamically changing as a result of growth. 3 figs.

  11. Reflection mass spectrometry technique for monitoring and controlling composition during molecular beam epitaxy

    DOE Patents [OSTI]

    Brennan, Thomas M.; Hammons, B. Eugene; Tsao, Jeffrey Y.

    1992-01-01

    A method for on-line accurate monitoring and precise control of molecular beam epitaxial growth of Groups III-III-V or Groups III-V-V layers in an advanced semiconductor device incorporates reflection mass spectrometry. The reflection mass spectrometry is responsive to intentional perturbations in molecular fluxes incident on a substrate by accurately measuring the molecular fluxes reflected from the substrate. The reflected flux is extremely sensitive to the state of the growing surface and the measurements obtained enable control of newly forming surfaces that are dynamically changing as a result of growth.

  12. 2D Seismic Reflection Data across Central Illinois

    SciTech Connect (OSTI)

    Smith, Valerie; Leetaru, Hannes

    2014-09-30

    In a continuing collaboration with the Midwest Geologic Sequestration Consortium (MGSC) on the Evaluation of the Carbon Sequestration Potential of the Cambro-Ordovician Strata of the Illinois and Michigan Basins project, Schlumberger Carbon Services and WesternGeco acquired two-dimensional (2D) seismic data in the Illinois Basin. This work included the design, acquisition and processing of approximately 125 miles of (2D) seismic reflection surveys running west to east in the central Illinois Basin. Schlumberger Carbon Services and WesternGeco oversaw the management of the field operations (including a pre-shoot planning, mobilization, acquisition and de-mobilization of the field personnel and equipment), procurement of the necessary permits to conduct the survey, post-shoot closure, processing of the raw data, and provided expert consultation as needed in the interpretation of the delivered product. Three 2D seismic lines were acquired across central Illinois during November and December 2010 and January 2011. Traversing the Illinois Basin, this 2D seismic survey was designed to image the stratigraphy of the Cambro-Ordovician sections and also to discern the basement topography. Prior to this survey, there were no regionally extensive 2D seismic data spanning this section of the Illinois Basin. Between the NW side of Morgan County and northwestern border of Douglas County, these seismic lines ran through very rural portions of the state. Starting in Morgan County, Line 101 was the longest at 93 miles in length and ended NE of Decatur, Illinois. Line 501 ran W-E from the Illinois Basin – Decatur Project (IBDP) site to northwestern Douglas County and was 25 miles in length. Line 601 was the shortest and ran N-S past the IBDP site and connected lines 101 and 501. All three lines are correlated to well logs at the IBDP site. Originally processed in 2011, the 2D seismic profiles exhibited a degradation of signal quality below ~400 millisecond (ms) which made

  13. Development and evaluation of an automated reflectance microscope system for the petrographic characterization of bituminous coals

    SciTech Connect (OSTI)

    Hoover, D. S.; Davis, A.

    1980-10-01

    The development of automated coal petrographic techniques will lessen the demands on skilled personnel to do routine work. This project is concerned with the development and successful testing of an instrument which will meet these needs. The fundamental differences in reflectance of the three primary maceral groups should enable their differentiation in an automated-reflectance frequency histogram (reflectogram). Consequently, reflected light photometry was chosen as the method for automating coal petrographic analysis. Three generations of an automated system (called Rapid Scan Versions I, II and III) were developed and evaluated for petrographic analysis. Their basic design was that of a reflected-light microscope photometer with an automatic stage, interfaced with a minicomputer. The hardware elements used in the Rapid Scan Version I limited the system's flexibility and presented problems with signal digitization and measurement precision. Rapid Scan Version II was designed to incorporate a new microscope photometer and computer system. A digital stepping stage was incorporated into the Rapid Scan Version III system. The precision of reflectance determination of this system was found to be +- 0.02 percent reflectance. The limiting factor in quantitative interpretation of Rapid Scan reflectograms is the resolution of reflectance populations of the individual maceral groups. Statistical testing indicated that reflectograms were highly reproducible, and a new computer program, PETAN, was written to interpret the curves for vitrinite reflectance parameters ad petrographic.

  14. Influence of the atmosphere on remotely sensed reflection from vegetation surfaces

    SciTech Connect (OSTI)

    Simmer, C.; Gerstl, S.A.W.

    1985-01-01

    Multiple scattering of solar radiation in a vegetation canopy is modelled equivalent to absorbing and scattering in a turbid medium with direction-dependent cross sections. Perturbations of plant reflection patterns due to atmospheric effects are computed at different altitudes and compared to the angular reflection characteristics caused by Lambertian surfaces of varying albedoes.

  15. Effects of Sample Preparation on the Infrared Reflectance Spectra of Powders

    SciTech Connect (OSTI)

    Brauer, Carolyn S.; Johnson, Timothy J.; Myers, Tanya L.; Su, Yin-Fong; Blake, Thomas A.; Forland, Brenda M.

    2015-05-22

    While reflectance spectroscopy is a useful tool in identifying molecular compounds, laboratory measurement of solid (particularly powder) samples often is confounded by sample preparation methods. For example, both the packing density and surface roughness can have an effect on the quantitative reflectance spectra of powdered samples. Recent efforts in our group have focused on developing standard methods for measuring reflectance spectra that accounts for sample preparation, as well as other factors such as particle size and provenance. In this work, the effect of preparation method on sample reflectivity was investigated by measuring the directional-hemispherical spectra of samples that were hand-packed as well as pressed into pellets using an integrating sphere attached to a Fourier transform infrared spectrometer. The results show that the methods used to prepare the sample have a substantial effect on the measured reflectance spectra, as do other factors such as particle size.

  16. Influence of ionization on reflection of solitary waves in a magnetized plasma

    SciTech Connect (OSTI)

    Jyoti,; Malik, Hitendra K.; Kumar, Ravinder; Dahiya, Raj P.

    2013-09-15

    The reflection of nonlinear solitary waves is studied in a nonuniform, magnetized plasma diffusing from an ionization source along the magnetic field lines. Contribution of the ionization term is included in the continuity equation. The behavior of solitary waves is governed by modified form of Korteweg–de Vries equation (called mKdV equation). In order to investigate the reflection of solitary waves, the mKdV equations for the right and left going waves are derived, and solved by finding new transformations coupled at the point of reflection, for obtaining the expression of reflection coefficient. Contrary to the case of usual inhomogeneous plasma, the present analysis shows that a combination of usual sech{sup 2} structure and tanh structure (called the tail of soliton) arises due to the influence of ionization term. Interestingly, this tailing structure disappears after the reflection of the soliton and hence, the soliton is downshifted prominently.

  17. Femtosecond laser ablation dynamics of fused silica extracted from oscillation of time-resolved reflectivity

    SciTech Connect (OSTI)

    Kumada, Takayuki Akagi, Hiroshi; Itakura, Ryuji; Otobe, Tomohito; Yokoyama, Atsushi

    2014-03-14

    Femtosecond laser ablation dynamics of fused silica is examined via time-resolved reflectivity measurements. After optical breakdown was caused by irradiation of a pump pulse with fluence F{sub pump}?=?3.314.9?J/cm{sup 2}, the reflectivity oscillated with a period of 63??2 ps for a wavelength ??=?795?nm. The period was reduced by half for ??=?398?nm. We ascribe the oscillation to the interference between the probe pulses reflected from the front and rear surfaces of the photo-excited molten fused silica layer. The time-resolved reflectivity agrees closely with a model comprising a photo-excited layer which expands due to the formation of voids, and then separates into two parts, one of which is left on the sample surface and the other separated as a molten thin layer from the surface by the spallation mechanism. Such oscillations were not observed in the reflectivity of soda-lime glass. Whether the reflectivity oscillates or not probably depends on the layer viscosity while in a molten state. Since viscosity of the molten fused silica is several orders of magnitude higher than that of the soda-lime glass at the same temperature, fused silica forms a molten thin layer that reflects the probe pulse, whereas the soda-lime glass is fragmented into clusters.

  18. Probing carrier dynamics of individual layers in a heterostructure using transient reflectivity

    SciTech Connect (OSTI)

    Khan, Salahuddin; Jayabalan, J. Singh, Asha; Yogi, Rachana; Chari, Rama

    2015-09-21

    We report the wavelength dependent transient reflectivity measurements in AlGaAs-GaAs heterostructures having two-dimensional electron (or hole) gas near the interface. Using a multilayer model for transient reflectivity, we show that the magnitude and sign of contributions from the carriers in two-dimensional electron (or hole) gas and GaAs to the total signal depends on the wavelength. Further, it has been shown that it is possible to study the carrier dynamics in a given layer of a heterostructure by performing transient reflectivity at specific wavelengths.

  19. Durable silver mirror with ultra-violet thru far infra-red reflection

    DOE Patents [OSTI]

    Wolfe, Jesse D.

    2010-11-23

    A durable highly reflective silver mirror characterized by high reflectance in a broad spectral range of about 300 nm in the UV to the far infrared (.about.10000 nm), as well as exceptional environmental durability. A high absorptivity metal underlayer is used which prevents the formation of a galvanic cell with a silver layer while increasing the reflectance of the silver layer. Environmentally durable overcoat layers are provided to enhance mechanical and chemical durability and protect the silver layer from corrosion and tarnishing, for use in a wide variety of surroundings or climates, including harsh or extreme environments.

  20. Composite refraction-reflection stack sections: Tracing faults in the Atlantic coastal plain sediments

    SciTech Connect (OSTI)

    Stephenson, D.E.; Coruh, C.; Costain, J.K.

    1993-05-01

    Seismic data from the Atlantic Coastal Plain are reprocessed and composite refraction-reflection stack sections produced to investigate basement faults that penetrate upward into Atlantic Coastal Plain sediments in South Carolina. Reprocessing recovered reflections from within the deep crust to the Moho as well as from within thin veneer (300) of the Atlantic Coastal Plain sediments. One of the major objectives of this paper is to discuss the use of shallow refracted arrivals to construct a composite refraction- reflection stack that allows better imaging of the subsurface at shallow depths.

  1. Reflecting the Revised PM 2.5 National Ambient Air Quality Standard in NEPA Evaluations

    Broader source: Energy.gov [DOE]

    This letter, from the Director of the Environmental Protection Agency's Office of Federal Activities, outlines EPA's position as to how the revised National Air Quality Standard should be reflected in NEPA evaluations of proposed actions.

  2. A 3D-3C Reflection Seismic Survey and Data Integration to Identify...

    Open Energy Info (EERE)

    geophysical and wellbore data for the area, and these data will be complemented with modern, state-of-the-art reflection seismic data. Three-component geophones will record...

  3. On-Line Measurement of Lubricant Film Thickness Using Ultrasonic Reflection Coefficients

    SciTech Connect (OSTI)

    Drinkwater, B.W.; Dwyer-Joyce, R.S.; Harper, P.

    2004-02-26

    The ultrasonic reflectivity of a lubricant layer between two solid bodies depends on the ultrasonic frequency, the acoustic properties of the liquid and solid, and the layer thickness. In this paper, ultrasonic reflectivity measurements are used as a method for determining the thickness of lubricating films in bearing systems. An ultrasonic transducer is positioned on the outside of a bearing shell such that the wave is focused on the lubricant film layer. For a particular lubricant film the reflected pulse is processed to give a reflection coefficient spectrum. The lubricant film thickness is then obtained from either the layer stiffness or the resonant frequency. The method has been validated using static fluid wedges and the elastohydrodynamic film formed between a ball sliding on a flat. Film thickness values in the range 50-500 nm were recorded which agreed well with theoretical film formation predictions.

  4. Reflecting the Revised PM 2.5 National Ambient Air Quality Standard...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quality Standard in NEPA Evaluations (EPA, 2007) Reflecting the Revised PM 2.5 National Ambient Air Quality Standard in NEPA Evaluations (EPA, 2007) This letter, from the Director ...

  5. Short pulse laser stretcher-compressor using a single common reflective grating

    DOE Patents [OSTI]

    Erbert, Gaylen V.; Biswal, Subrat; Bartolick, Joseph M.; Stuart, Brent C.; Telford, Steve

    2004-05-25

    The present invention provides an easily aligned, all-reflective, aberration-free pulse stretcher-compressor in a compact geometry. The stretcher-compressor device is a reflective multi-layer dielectric that can be utilized for high power chirped-pulse amplification material processing applications. A reflective grating element of the device is constructed: 1) to receive a beam for stretching of laser pulses in a beam stretcher beam path and 2) to also receive stretched amplified pulses to be compressed in a compressor beam path through the same (i.e., common) reflective multilayer dielectric diffraction grating. The stretched and compressed pulses are interleaved about the grating element to provide the desired number of passes in each respective beam path in order to achieve the desired results.

  6. U.S. oil production forecast update reflects lower rig count

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    U.S. oil production forecast update reflects lower rig count Lower oil prices and fewer rigs drilling for crude oil are expected to slow U.S. oil production growth this year and in ...

  7. Calculation of infrared plasma reflection spectra of inhomogeneously doped P-type gallium arsenide

    SciTech Connect (OSTI)

    CHEN Wei-xi; LI Guo-hua; NIU Jin-zhen; GUO Chang-zhi

    1982-01-01

    The influence of the surface concentration and concentration profile of free carriers, the layer thickness and free carrier concentration of the homogeneous substrate on the infrared plasma reflection spectra of inhomogeneously doped P-type GaAs layers is analyzed by computer solutions of differential equations for the optical admittance. Computed spectra are reported for four different profiles and several substrate concentrations. Methods for evaluation of the measured reflection spectra and the limitation of this technique are discussed.

  8. Obama's Call for Public-Private Cyber Security Collaboration Reflected in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE's Priorities | Department of Energy Obama's Call for Public-Private Cyber Security Collaboration Reflected in DOE's Priorities Obama's Call for Public-Private Cyber Security Collaboration Reflected in DOE's Priorities May 29, 2009 - 4:08pm Addthis In releasing the results of his Administration's 60-day cyber security review, President Barack Obama today emphasized that partnering with the private sector will be paramount for agencies working to secure the power grid and other critical

  9. Fracture detection in crystalline rock using ultrasonic reflection techniques: Volume 1

    SciTech Connect (OSTI)

    Palmer, S.P. )

    1982-11-01

    This research was initiated to investigate using ultrasonic seismic reflection techniques to detect fracture discontinuities in a granitic rock. Initial compressional (P) and shear (SH) wave experiments were performed on a 0.9 {times} 0.9 {times} 0.3 meter granite slab in an attempt to detect seismic energy reflected from the opposite face of the slab. It was found that processing techniques such as deconvolution and array synthesis could improve the standout of the reflection event. During the summers of 1979 and 1980 SH reflection experiments were performed at a granite quarry near Knowles, California. The purpose of this study was to use SH reflection methods to detect an in situ fracture located one to three meters behind the quarry face. These SH data were later analyzed using methods similar to those applied in the laboratory. Interpretation of the later-arriving events observed in the SH field data as reflections from a steeply-dipping fracture was inconclusive. 41 refs., 43 figs., 7 tabs.

  10. Optical Reflection Spectroscopy of Thick Corrosion Layers on 304 Stainless Steel

    SciTech Connect (OSTI)

    R Castelli; P Persans; W Strohmayer; V Parkinson

    2006-03-23

    Corrosion resistant structural materials of both iron and nickel based alloys are used in the electric power industry for the construction of the coolant loops of both conventional and nuclear power generating stations. These materials, in the presence of high temperature (e.g. 287 C), high pH (e.g. 10.0 {at} 20 C) water with dissolved hydrogen will oxidize and form corrosion films that are double metal oxides (or spinels) of the form AB{sub 2}O{sub 4}. This work describes optical reflectivity techniques that have been developed to study the growth of these films in situ. The optical technique uses a dual-beam specular reflection spectrometer to measure the spectrum of reflected light in small angle (i.e. < 15{sup o}) scatter. The reflection spectra are then calibrated using a set of corrosion coupons with corrosion films that are well known. Results are compared with models based on multilayer reflection and Mie scattering from a particle size distribution. Surface roughness is found to be the dominant cause of reduced reflection as the films grow.

  11. Data Analysis from Ground Source Heat Pump Demonstration Projects

    Office of Energy Efficiency and Renewable Energy (EERE)

    Lead Performer: Oak Ridge National Laboratory - Oak Ridge, TN Partners: -- CDH Energy - Cazenovia, NY -- University of Tennessee - Knoxville, TN -- Cedarville Schools - Cedarville, AR (ARRA grantee) -- Flathead Electric Cooperative - Kalispell, MT (ARRA grantee) -- University at Albany - Albany, NY (ARRA grantee) -- City of Raleigh, NC (ARRA grantee) -- Montana Tech (ARRA grantee) -- Oakland University - Rochester, MI (ARRA grantee)

  12. 2012-2013 Budget Update and ARRA Closeout Presentation by Joann...

    Office of Environmental Management (EM)

    ... West Valley Demonstration Project 62,875,000 62,875,000 60,303,532 Title X UraniumThorium Reimbursements 70,000,000 69,996,978 54,994,235 Management & Oversight 27,920,000 ...

  13. EAC Presentation: Metrics and Benefits Analysis for the ARRA Smart Grid Programs- March 10, 2011

    Broader source: Energy.gov [DOE]

    PowerPoint presentation by Joe Paladino from the Office of Electricity Delivery and Energy Reliability before the Electricity Advisory Committee (EAC) on metrics and benefits analysis for the...

  14. Medium Duty ARRA Data Reporting and Analysis; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    Kelly, Kenneth; Duran, Adam; Ragatz, Adam; Prohaska, Robert; Walkowicz, Kevin

    2015-06-11

    Medium-duty (MD) electric vehicle (EV) data collection and analysis will help drive design, purchase, and research investments. Over 4 million miles and 160,000 driving days of EV driving data were collected under this project. Publicly available data help drive technology research, development, and deployment. Feeding the vocational database for future analysis will lead to a better understanding of usage and will result in better design optimization and technology implementation. The performance of a vehicle varies with drive cycle and cargo load - MD vehicles are 'multi-functional.' Environment and accessory loads affect vehicle range and in turn add cost by adding battery capacity. MD EV vehicles can function in vocations traditionally serviced by gasoline or diesel vehicles. Facility implications (i.e., demand charges) need to be understood as part of site-based analysis for EV implementation.

  15. CALiPER Exploratory Study Office and Classroom Recessed Troffer Lighting - ARRA Report

    SciTech Connect (OSTI)

    Miller, Naomi J.

    2012-09-30

    This report is a brief summary of a project exploring LED versions of a very common luminaire type, the recessed troffer. It describes the planning and preparation for a mockup of 24 pairs of troffers in a simulated office space, where observations and comments were recorded.

  16. 2012-2013 Budget Update and ARRA Closeout Presentation by Joann Luczak

    Office of Environmental Management (EM)

    Energy 2 Tribal Energy Program Review Meeting Presentations 2012 Tribal Energy Program Review Meeting Presentations Find presentations from the November 2012 Tribal Energy Program Review in Denver, Colorado, below. Sort by topic, tribe, presenter, or presentation title. Topic Tribe/Affiliation Presenter Presentation Overview Lizana Pierce Tribal Energy Program Overview Overview Douglas C. MacCourt The Business of Energy Development: Basics for Tribal Projects Overview Lizana Pierce Pathways

  17. ARRA additions to the north slope of Alaska. (Conference) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Authors: Richardson, Scott 1 ; Cherry, Jessica 2 ; Stuefer, Martin 2 ; Zirzow, Jeffrey A. ; Zak, Bernard Daniel ; Ivey, Mark D. ; Verlinde, Johannes 1 + Show Author ...

  18. EM ARRA Best Practices and Lessons Learned Workshop: Field Manager's Top Issues

    Office of Environmental Management (EM)

    N V I R O N M E N T A L I M P A C T S T A T E M E N T S U M M A R Y PLAINS & EASTERN CLEAN LINE TRANSMISSION PROJECT DOE/EIS-0486 Final U.S. DEPARTMENT OF ENERGY Office of Electricity Delivery and Energy Reliability Washington, DC October 2015 This page intentionally left blank. SUMMARY PLAINS & EASTERN FINAL ENVIRONMENTAL IMPACT STATEMENT S-i COVER SHEET RESPONSIBLE FEDERAL AGENCY: U.S. Department of Energy (DOE), Office of Electricity Delivery and Energy Reliability COOPERATING

  19. Property:Geothermal/NumberOfArraProjectTypeTopic2 | Open Energy...

    Open Energy Info (EERE)

    + 7 + Geothermal Data Development, Collection, and Maintenance + 3 + Geothermal Energy Production from Low Temperature Resources, Coproduced Fluids from Oil and Gas Wells, and...

  20. Data Analysis and Reporting of the 150 Chevrolet Volt ARRA Demonstration Fleet

    SciTech Connect (OSTI)

    Richard "Barney" Carlson

    2014-07-01

    This is the final report for the GM Vehicle Demo analysis and reporting. I'd like it to be posted to the AVTA website. It contains no new information than what is in Quarterly reports that were previously approved by GM.