Powered by Deep Web Technologies
Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Hanford ARRA News - Hanford Site  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Recovery Act of 2009 > Hanford ARRA News Recovery Act of 2009 Hanford ARRA FAQ Hanford ARRA Weekly Reports Hanford ARRA News Hanford ARRA Photogallery Hanford ARRA Videos Hanford...

2

GTP ARRA Spreadsheet | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision has beenFfe2fb55-352f-473b-a2dd-50ae8b27f0a6TheoreticalFuelCell Energy IncFOR EGS HomeInformationGTP

3

Documenting Spreadsheets  

E-Print Network [OSTI]

This paper discusses spreadsheets documentation and new means to achieve this end by using Excel's built-in "Comment" function. By structuring comments, they can be used as an essential tool to fully explain spreadsheet. This will greatly facilitate spreadsheet change control, risk management and auditing. It will fill a crucial gap in corporate governance by adding essential information that can be managed in order to satisfy internal controls and accountability standards.

Payette, Raymond

2008-01-01T23:59:59.000Z

4

ARRA FUNDED ENERGY PROGRAMS  

E-Print Network [OSTI]

while retaining and creating jobs for energy industry manufacturing facilities in the state. #12ARRA FUNDED ENERGY PROGRAMS CALIFORNIA ENERGY COMMISSION JULY 1, 2010 INVESTING IN CALIFORNIA'S ENERGY FUTURE #12;#12;1 The California energy Commission is reCeiving $314.5 million in American Recovery

5

Arras User's Manual John B. Smith  

E-Print Network [OSTI]

Arras User's Manual TR85-036 1985 John B. Smith The University of North Carolina at Chapel Hill'S MANUAL John B. Smith Department or Computer Science University or North Carolina Chapel Hill, North Carolina 27514 Copyright© 1984 by John B. Smith #12;Starling ARRAS Note for those not using TUCC: The ARRAS

North Carolina at Chapel Hill, University of

6

EAC Presentation: Metrics and Benefits Analysis for the ARRA...  

Broader source: Energy.gov (indexed) [DOE]

Metrics and Benefits Analysis for the ARRA Smart Grid Programs - March 10, 2011 EAC Presentation: Metrics and Benefits Analysis for the ARRA Smart Grid Programs - March 10, 2011...

7

American Recovery & Reinvestment Act, ARRA, clean energy projects...  

Energy Savers [EERE]

Recovery & Reinvestment Act, ARRA, clean energy projects, energy efficiency, smart grid, alternative fuels, geothermal energy American Recovery & Reinvestment Act, ARRA, clean...

8

AMERICAN RECOVERY AND REINVESTMENT ACT (ARRA) REPORTING PROCESS The California Energy Commission  

E-Print Network [OSTI]

. A percentage of the package targets spending (contracts, grants, and loans) and the rest includes tax cuts · Foster unprecedented levels of accountability and transparency in government spending http for tracking and reporting on ARRA grants, loans, and contracts. This includes tracking and reporting

9

Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA); November 2011 Composite Data Products - Deployment (Presentation)  

SciTech Connect (OSTI)

This presentation is about the Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA). November 2011 Composite Data Products - Deployment November 30, 2011.

Kurtz, J.; Wipke, K.; Sprik, S.; Ramsden, T.; Ainscough, C.

2012-06-01T23:59:59.000Z

10

Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA); Quarter 1 2012 Composite Data Products - Deployment (Presentation)  

SciTech Connect (OSTI)

This presentation is about the Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA). Quarter 1 2012 Composite Data Products - Deployment March 8, 2012.

Kurtz, J.; Wipke, K.; Sprik, S.; Ramsden, T.; Ainscough, C.

2012-06-01T23:59:59.000Z

11

ARRA Program Summary: Energy Smart Jobs Program  

E-Print Network [OSTI]

ARRA Program Summary: Energy Smart Jobs Program Statewide Program (Initially targeting urban 30,000 buildings surveyed, approximately 5,000 will be retrofitted, yielding approximately $40

12

Value of Information spreadsheet  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

This spreadsheet represents the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value of information of MT for geothermal exploration. Information posteriors describe how well MT was able to locate the "throat" of clay caps, which are indicative of hidden geothermal resources. This data is full explained in the peer-reviewed publication: Trainor-Guitton, W., Hoversten, G. M., Ramirez, A., Roberts, J., Jlusson, E., Key, K., Mellors, R. (Sept-Oct. 2014) The value of spatial information for determining well placement: a geothermal example, Geophysics.

Trainor-Guitton, Whitney

13

Value of Information spreadsheet  

SciTech Connect (OSTI)

This spreadsheet represents the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value of information of MT for geothermal exploration. Information posteriors describe how well MT was able to locate the "throat" of clay caps, which are indicative of hidden geothermal resources. This data is full explained in the peer-reviewed publication: Trainor-Guitton, W., Hoversten, G. M., Ramirez, A., Roberts, J., Jlusson, E., Key, K., Mellors, R. (Sept-Oct. 2014) The value of spatial information for determining well placement: a geothermal example, Geophysics.

Trainor-Guitton, Whitney

2014-05-12T23:59:59.000Z

14

ARRA Proposed Award: Energy Technology Assistance Program  

E-Print Network [OSTI]

ARRA Proposed Award: Energy Technology Assistance Program Statewide Program ­ covering Greater Sub contractors: California Lighting Technology Center California Labor Management Cooperation multiplier) Partnering Clean Energy Workforce Training Programs: Sacramento Employment Training Agency

15

Excel spreadsheet discussed in Report Appendix  

Broader source: Energy.gov [DOE]

The functional spreadsheet which accompanies the Accounting for Uncertainty in Lumen Measurements report.

16

ARRA Program Celebrates Milestone 600,000 Smart Meter Installations...  

Broader source: Energy.gov (indexed) [DOE]

ARRA Program Celebrates Milestone 600,000 Smart Meter Installations ARRA Program Celebrates Milestone 600,000 Smart Meter Installations April 17, 2012 - 3:09pm Addthis On April 11,...

17

Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA): Quarter 4 2013 Composite Data Products  

SciTech Connect (OSTI)

This report includes the composite data products (CDPs) for early fuel cell market deployments in quarter 4 of 2013. Results are presented for ARRA (projects funded by the American Recovery and Reinvestment Act of 2009 [ARRA]) and Combined (projects funded by DOE Interagency Agreements [IAA], Department of Defense Defense Logistics Agency [DLA], and ARRA).

Kurtz, J.; Sprik, S.

2014-06-01T23:59:59.000Z

18

Avoiding, Finding and Fixing Spreadsheet Errors -A Survey of Automated Approaches for Spreadsheet QA  

E-Print Network [OSTI]

reviews and audits, to better tool support for the user during the spreadsheet development processAvoiding, Finding and Fixing Spreadsheet Errors - A Survey of Automated Approaches for Spreadsheet Graz, Austria Abstract Spreadsheet programs can be found everywhere in organizations and they are used

Jannach, Dietmar

19

AMERICAN RECOVERY AND REINVESTMENT ACT (ARRA) REPORTING PROCESS California Energy Commission PAGE 1 OF 26  

E-Print Network [OSTI]

AMERICAN RECOVERY AND REINVESTMENT ACT (ARRA) REPORTING PROCESS California Energy Commission PAGE 1 OF 26 Rev. 2/1/10 The California Energy Commission ARRA Reporting Process Reference Guide...................................................................3 ARRA SUBRECIPIENT REPORTING PROCESS

20

ARRA Proposed Award: Retrofit Bay Area  

E-Print Network [OSTI]

ARRA Proposed Award: Retrofit Bay Area Counties of Alameda, Contra Costa, Marin, San Francisco per year Prime contractor: Association of Bay Area Governments (ABAG) Sub contractors: Alameda County Waste Management Authority (StopWaste.org) County of Contra Costa County of Marin City

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

AVTA: ARRA EV Project Charging Infrastructure Data Summary Reports...  

Broader source: Energy.gov (indexed) [DOE]

Charging Infrastructure Data Summary Reports AVTA: ARRA EV Project Charging Infrastructure Data Summary Reports The Vehicle Technologies Office's Advanced Vehicle Testing Activity...

22

Energy Advising Services in the Post-ARRA World | Department...  

Energy Savers [EERE]

World Energy Advising Services in the Post-ARRA World Better Buildings Residential Network Workforce Business Partners Peer Exchange Call: Energy Advising Services in the...

23

Navy's Geothermal Program Office: Overview of Recovery Act (ARRA...  

Open Energy Info (EERE)

of Recovery Act (ARRA) Funded Exploration in CA and NV and other Exploration Projects Abstract The Navy's Geothermal Program Office (GPO) manages, explores for and supports the...

24

AVTA: ARRA EV Project Residential Charging Infrastructure Maps...  

Broader source: Energy.gov (indexed) [DOE]

Residential Charging Infrastructure Maps AVTA: ARRA EV Project Residential Charging Infrastructure Maps The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries...

25

Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA); Quarter 3 2012 Composite Data Products  

SciTech Connect (OSTI)

This report from the U.S. Department of Energy's National Renewable Energy Laboratory includes early fuel cell market composite data products for the third quarter of 2012 for American Recovery and Reinvestment Act (ARRA) and combined (IAA, DLA, ARRA) deployment projects.

Kurtz, J.; Wipke, K.; Sprik, S.; Ramsden, T.; Ainscough, C.; Saur, G.; Post, M.

2013-01-01T23:59:59.000Z

26

ARRA521 Recovery Act - Project Daily Report  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustionImprovement3 Beryllium-Associated6-05.pdf AL2006-05.pdfAMI SystemNEUP ProjectARRA EconomicSite

27

ARRA Projects Chart | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South Valley ResponsibleSubmissionofDepartmentNo.7-052DepartmentDepartmentARRA

28

ARM - Field Campaign - ARRA AERI Comparison  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010September 30,JuneMayIIIgovCampaignsARMgovCampaignsARRA

29

Sandia National Laboratories: Recovery Act (ARRA) Projects  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik SpoerkeSolar Regional TestClimateResearchRecovery Act (ARRA) Projects

30

Report on all ARRA Funded Technical Work  

SciTech Connect (OSTI)

The main focus of this American Recovery and Reinvestment Act of 2009 (ARRA) funded project was to design an energy efficient carbon capture and storage (CCS) process using the Recipient?s membrane system for H{sub 2} separation and CO{sub 2} capture. In the ARRA-funded project, the Recipient accelerated development and scale-up of ongoing hydrogen membrane technology research and development (R&D). Specifically, this project focused on accelerating the current R&D work scope of the base program-funded project, involving lab scale tests, detail design of a 250 lb/day H{sub 2} process development unit (PDU), and scale-up of membrane tube and coating manufacturing. This project scope included the site selection and a Front End Engineering Design (FEED) study of a nominally 4 to 10 ton-per-day (TPD) Pre-Commercial Module (PCM) hydrogen separation membrane system. Process models and techno-economic analysis were updated to include studies on integration of this technology into an Integrated Gasification Combined Cycle (IGCC) power generation system with CCS.

None

2013-10-05T23:59:59.000Z

31

Managing Financing Programs-- Spreadsheet Models (Text Version)  

Broader source: Energy.gov [DOE]

Chris: - financial market development team. I'm really glad that all of you have been able to take time out of your busy days to come and share some time with us talking about using spreadsheet...

32

Data Analysis for ARRA Early Fuel Cell Market Demonstrations (Presentation)  

SciTech Connect (OSTI)

Presentation about ARRA Early Fuel Cell Market Demonstrations, including an overview of the ARRE Fuel Cell Project, the National Renewable Energy Laboratory's data analysis objectives, deployment composite data products, and planned analyses.

Kurtz, J.; Wipke, K.; Sprik, S.; Ramsden, T.

2010-05-01T23:59:59.000Z

33

05-19-2010 ARRA-10-0238  

Broader source: Energy.gov (indexed) [DOE]

5-19-2010 ARRA-10-0238 Sandia National LaboratoriesNew Mexico (SNLNM) proposes to install a modern computer workstation cluster, which would provide the necessary advanced...

34

07-09-2010 ARRA-10-0180  

Broader source: Energy.gov (indexed) [DOE]

7-09-2010 ARRA-10-0180 Sandia National LaboratoriesNew Mexico (SNLNM) proposes to conduct a series of facility upgrades and refurbishment activities for the National Solar...

35

CALIFORNIA ENERGY COMMISSION Administered ARRA Funded Programs (2/17/10) State Energy Program $226 million  

E-Print Network [OSTI]

and water efficiency, renewable energy, smart grid and clean transportation fields. ARRA Funding: $20. ARRA Funding: $25 million Target Audience: City and county governments Leveraged Funding million Target Audience: Community colleges, training & employment partnerships, cities & counties

36

E-Print Network 3.0 - act arra funding Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2009 Summary: Research Administration 12;2 ARRA Grant Funding Opps and Info at Grants.nih.govRecovery NIH Recovery Web... total amount of ARRA funds received that quarter; how...

37

Davis-Bacon Act Wage Rates for ARRA-Funded State Energy Program...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Davis-Bacon Act Wage Rates for ARRA-Funded State Energy Program Projects Involving Residential Weatherization Work Davis-Bacon Act Wage Rates for ARRA-Funded State Energy Program...

38

ARRA Proposed Award: Downtown Oakland Targeted Measure Saturation Program  

E-Print Network [OSTI]

: Community Energy Services Corporation City of Oakland Circlepoint Multimedia Design Estimated Full buildings in a dense, 120 block area in the City of Oakland that is an economically disadvantaged areaARRA Proposed Award: Downtown Oakland Targeted Measure Saturation Program Targeting the City

39

Argonne Director Eric Isaacs talks about ARRA funding at Argonne  

ScienceCinema (OSTI)

Argonne is set to receive over $150 million in stimulus funds. Director Eric Isaacs describes how these funds will be put to good use?hiring employees and contractors, cleaning up the nuclear footprint, and investing in technologies for America's future. More info on Argonne and ARRA here: http://www.anl.gov/recovery/index.html

Isaacs, Eric

2013-04-19T23:59:59.000Z

40

DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED ENERGY EFFICIENCY...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANT (EECBG) PROGRAM PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED ENERGY EFFICIENCY AND...

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Progress of DOE Materials, Manufacturing Process R&D, and ARRA...  

Broader source: Energy.gov (indexed) [DOE]

Vehicles ARRA Battery Manufacturing for Electric Drive Vehicles Presenter Christopher Johnson NETL Battery Projects Manager May 15th, 2012 2008 - Materials and Manufacturing...

42

Progress of DOE Materials, Manufacturing Process R&D, and ARRA...  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Process R&D, and ARRA Battery Manufacturing Grants by Christopher D. Johnson NETL Battery Projects Manager May 10, 2011 This presentation does not contain any...

43

DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

PROGRAM (SEP) PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM (SEP) PROJECTS INCLUDING RESIDENTIAL...

44

Track 8: Safety of Work Created Under the American Recovery and Reinvestment Act (ARRA)  

Broader source: Energy.gov [DOE]

ISM Workshop Presentations Knoxville Convention Center, Knoxville, TN August 2009 Track 8: Safety of Work Created Under the American Recovery and Reinvestment Act (ARRA)

45

Property:GeothermalArraAwardeeCostShare | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:PlugNumberOfArraProjectTypeTopic2 Jump

46

Property:GeothermalArraProjectFunding | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:PlugNumberOfArraProjectTypeTopic2

47

Spreadsheet Filtering by FFT Gaussian-based Convolution  

E-Print Network [OSTI]

Filtering of digital signals is accomplished on an Excel spreadsheet using fast Fourier transform (FFT) convolution in which the kernel is either a Gaussian or a cosine modulated Gaussian. Pedagogical examples of low-pass and band-pass filtering are provided, and the practical value of the spreadsheet is illustrated with some cases involving an earthquake record generated by a folded pendulum seismometer.

Randall D. Peters

2004-06-18T23:59:59.000Z

48

Examples of Benefits from the NEPA process for ARRA funded activities  

Broader source: Energy.gov [DOE]

Efforts to implement the American Recovery and Reinvestment Act of 2009 (ARRA) include ensuring, and reporting on, timely NEPA reviews prepared in support of projects and activities funded under major provisions of ARRA. In addition to reporting on the status of the NEPA environmental reviews, agencies also report on the benefits of NEPA.

49

ARRA Economic Impact and Jobs | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustionImprovement3 Beryllium-Associated6-05.pdf AL2006-05.pdfAMI SystemNEUP ProjectARRA Economic

50

ARRA wraps up | Y-12 National Security Complex  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUCProductstwrmrAre the Effects of Global Warming?8Department ofDepartmenttoARRA

51

Category:Geothermal ARRA Funded Projects Properties | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBostonFacilityCascadeJump to: navigation, searchInformation ARRA

52

ARRA Site Characterization Projects | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)Productssondeadjustsondeadjust DocumentationARMStreamsUS DepartmentARM'sARPES Provides 2 *AcARRA Site

53

Compiling and optimizing spreadsheets for FPGA and multicore execution  

E-Print Network [OSTI]

A major barrier to developing systems on multicore and FPGA chips is an easy-to-use development environment. This thesis presents the RhoZeta spreadsheet compiler and Catalyst optimization system for programming multiprocessors ...

Hirsch, Amir

2007-01-01T23:59:59.000Z

54

Strontium-90 Error Discovered in Subcontract Laboratory Spreadsheet  

SciTech Connect (OSTI)

West Valley Demonstration Project health physicists and environment scientists discovered a series of errors in a subcontractor's spreadsheet being used to reduce data as part of their strontium-90 analytical process.

D. D. Brown A. S. Nagel

1999-07-31T23:59:59.000Z

55

Spreadsheet modelling for solving combinatorial problems: The vendor selection problem  

E-Print Network [OSTI]

Spreadsheets have grown up and became very powerful and easy to use tools in applying analytical techniques for solving business problems. Operations managers, production managers, planners and schedulers can work with them in developing solid and practical Do-It-Yourself Decision Support Systems. Small and Medium size organizations, can apply OR methodologies without the presence of specialized software and trained personnel, which in many cases cannot afford anyway. This paper examines an efficient approach in solving combinatorial programming problems with the use of spreadsheets. A practical application, which demonstrates the approach, concerns the development of a spreadsheet-based DSS for the Multi Item Procurement Problem with Fixed Vendor Cost. The DSS has been build using exclusively standard spreadsheet feature and can solve real problems of substantial size. The benefits and limitations of the approach are also discussed.

Ipsilandis, Pandelis G

2008-01-01T23:59:59.000Z

56

Applying the CobiT Control Framework to Spreadsheet Developments  

E-Print Network [OSTI]

One of the problems reported by researchers and auditors in the field of spreadsheet risks is that of getting and keeping managements attention to the problem. Since 1996, the Information Systems Audit & Control Foundation and the IT Governance Institute have published CobiT which brings mainstream IT control issues into the corporate governance arena. This paper illustrates how spreadsheet risk and control issues can be mapped onto the CobiT framework and thus brought to managers attention in a familiar format.

Butler, Raymond J

2008-01-01T23:59:59.000Z

57

ARRA Material Handling Equipment Composite Data Products: Data Through Quarter 4 of 2013  

SciTech Connect (OSTI)

This report includes 47 composite data products (CDPs) produced for American Recovery and Reinvestment Act (ARRA) fuel cell material handling equipment, with data through the fourth quarter of 2013.

Kurtz, J.; Sprik, S.; Peters, M.

2014-06-01T23:59:59.000Z

58

ARRA Material Handling Equipment Composite Data Products: Data through Quarter 2 of 2012  

SciTech Connect (OSTI)

This presentation from the U.S. Department of Energy's National Renewable Energy Laboratory includes American Recovery and Reinvestment Act (ARRA) fuel cell material handling equipment composite data products for data through the second quarter of 2012.

Kurtz, J.; Sprik, S.; Ramsden, T.; Ainscough, C.; Saur, G.

2012-10-01T23:59:59.000Z

59

ARRA Material Handling Equipment Composite Data Products: Data Through Quarter 4 of 2012  

SciTech Connect (OSTI)

This presentation from the U.S. Department of Energy's National Renewable Energy Laboratory includes American Recovery and Reinvestment Act (ARRA) fuel cell material handling equipment composite data products for data through the fourth quarter of 2012.

Kurtz, J.; Sprik, S.; Ainscough, C.; Saur, G.; Post, M.; Peters, M.; Ramsden, T.

2013-05-01T23:59:59.000Z

60

ARRA Material Handling Equipment Composite Data Products: Data through Quarter 2 of 2013  

SciTech Connect (OSTI)

This report includes 47 composite data products (CDPs) produced for American Recovery and Reinvestment Act (ARRA) fuel cell material handling equipment, with data through the second quarter of 2013.

Kurtz, J.; Sprik, S.; Ainscough, C.; Saur, G.; Post, M.; Peters, M.

2013-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Medium Duty ARRA Data Reporting and Analysis (Presentation)  

SciTech Connect (OSTI)

This project compiles medium-duty (MD) aggregated deployment data and provides the compiled detailed analyses to industry. The U.S. Department of Energy's (DOE's) American Recovery and Reinvestment Act (ARRA) deployment and demonstration projects are helping to commercialize technologies for all-electric vehicles, electrified accessories, and electric charging infrastructure. Over 3.2 million miles of in-service all-electric MD truck data from 560 different vehicles have been collected since 2011, and usage data from over 1,000 truck electrification sites have been collected since 2013. Through the DOE's Vehicle Technologies Office, NREL is working to analyze real-time data from these deployment and demonstration projects to quantify the benefits: results and summary statistics are made available through the NREL website as quarterly and annual reports; 23 aggregated reports have been published on the performance and operation of these vehicles; and detailed data are being extracted to help further understand battery use and performance.

Walkowicz, K.

2014-06-01T23:59:59.000Z

62

When Spreadsheets Become Software - Quality Control Challenges and Approaches - 13360  

SciTech Connect (OSTI)

As part of a preliminary waste acceptance criteria (PWAC) development, several commercial models were employed, including the Hydrologic Evaluation of Landfill Performance model (HELP) [1], the Disposal Unit Source Term - Multiple Species model (DUSTMS) [2], and the Analytical Transient One, Two, and Three-Dimensional model (AT123D) [3]. The results of these models were post-processed in MS Excel spreadsheets to convert the model results to alternate units, compare the groundwater concentrations to the groundwater concentration thresholds, and then to adjust the waste contaminant masses (based on average concentration over the waste volume) as needed in an attempt to achieve groundwater concentrations at the limiting point of assessment that would meet the compliance concentrations while maximizing the potential use of the landfill (i.e., maximizing the volume of projected waste being generated that could be placed in the landfill). During the course of the PWAC calculation development, one of the Microsoft (MS) Excel spreadsheets used to post-process the results of the commercial model packages grew to include more than 575,000 formulas across 18 worksheets. This spreadsheet was used to assess six base scenarios as well as nine uncertainty/sensitivity scenarios. The complexity of the spreadsheet resulted in the need for a rigorous quality control (QC) procedure to verify data entry and confirm the accuracy of formulas. (authors)

Fountain, Stefanie A.; Chen, Emmie G.; Beech, John F. [Geosyntec Consultants, Inc., 1255 Roberts Boulevard NW, Suite 200, Kennesaw, GA 30144 (United States)] [Geosyntec Consultants, Inc., 1255 Roberts Boulevard NW, Suite 200, Kennesaw, GA 30144 (United States); Wyatt, Elizabeth E. [LATA Environmental Services of Kentucky, LLC, 761 Veterans Ave, Kevil, KY 42053 (United States)] [LATA Environmental Services of Kentucky, LLC, 761 Veterans Ave, Kevil, KY 42053 (United States); Quinn, Tanya B. [Geosyntec Consultants, Inc., 2002 Summit Boulevard NE, Suite 885, Atlanta, GA 30319 (United States)] [Geosyntec Consultants, Inc., 2002 Summit Boulevard NE, Suite 885, Atlanta, GA 30319 (United States); Seifert, Robert W. [Portsmouth/Paducah Project Office, United States Department of Energy, 5600 Hobbs Rd, Kevil, KY 42053 (United States)] [Portsmouth/Paducah Project Office, United States Department of Energy, 5600 Hobbs Rd, Kevil, KY 42053 (United States); Bonczek, Richard R. [Portsmouth/Paducah Project Office, United States Department of Energy, 1017 Majestic Drive, Lexington, KY 40513 (United States)] [Portsmouth/Paducah Project Office, United States Department of Energy, 1017 Majestic Drive, Lexington, KY 40513 (United States)

2013-07-01T23:59:59.000Z

63

Toward an integrated framework for declarative and interactive spreadsheet debugging  

E-Print Network [OSTI]

of a constraint-based debugging approach implemented in the framework, which supports the automated identifi by the fact that spreadsheets are often developed by non-programmers and are not subject to formal QA can be found in a lack of formal training or missing formal Q&A procedures, see, e.g., (Pember- ton

Jannach, Dietmar

64

NATIONAL EVALUATION OF THE WEATHERIZATION ASSISTANCE PROGRAM DURING THE ARRA PERIOD: PROGRAM YEARS 2009-2011  

SciTech Connect (OSTI)

This report describes the third major evaluation of the Program, encompassing program years 2009 to 2011. In this report, this period of time is referred to as the ARRA Period. This is a special period of time for the Program because the American Recovery and Reinvestment Act (ARRA) of 2009 has allocated $5 billion of funding for the Program. In normal program years, WAP s annual appropriation is in the range of $200-250 million, supporting the weatherization of approximately 100,000 homes. With the addition of ARRA funding during these program years, the expectation is that weatherization activity will exceed 300,000 homes per year. In addition to saving energy and reducing low-income energy bills, expanded WAP funding is expected to stimulate the economy by providing new jobs in the weatherization field and allowing low-income households to spend more money on goods and services by spending less on energy.

Tonn, Bruce Edward [ORNL; Rose, Erin M [ORNL; Schmoyer, Richard L [ORNL; Eisenberg, Joel Fred [ORNL; Ternes, Mark P [ORNL; Schweitzer, Martin [ORNL; Hendrick, Timothy P [ORNL

2012-08-01T23:59:59.000Z

65

Tracer Interpretation Using Temporal Moments on a Spreadsheet  

SciTech Connect (OSTI)

This report presents a method for interpreting geothermal tracer tests. The method is based on the first temporal moment (mean residence time) of the tracer in the subsurface. The individual steps required to interpret a tracer test are reviewed and discussed. And an example tracer test directs the user through the interpretation method. An Excel spreadsheet application of the interpretation method is a companion document to this report.

G. Michael Shook; J. Hope Forsmann

2005-06-01T23:59:59.000Z

66

ARRA-funded Cloud Radar Development for the Department of Energy's ARM Climate Research Facility  

E-Print Network [OSTI]

ARRA-funded Cloud Radar Development for the Department of Energy's ARM Climate Research Facility assembler jobs were saved because of this large order. ProSensing is also planning to engage a local defense for similar cloud radar contracts for customers in India, China and Korea. By developing these complex radar

67

Qtier-Rapor: Managing Spreadsheet Systems & Improving Corporate Performance, Compliance and Governance  

E-Print Network [OSTI]

Much of what EuSpRIG discusses is concerned with the integrity of individual spreadsheets. In businesses, interlocking spreadsheets are regularly used to fill functional gaps in core administrative systems. The growth and deployment of such integrated spreadsheet SYSTEMS raises the scale of issues to a whole new level. The correct management of spreadsheet systems is necessary to ensure that the business achieves its goals of improved performance and good corporate governance, within the constraints of legislative compliance - poor management will deliver the opposite. This paper is an anatomy of the real-life issues of the commercial use of spreadsheets in business, and demonstrates how Qtier-Rapor has been used to instil best practice in the use of integrated commercial spreadsheet systems.

Bishop, Keith

2008-01-01T23:59:59.000Z

68

E-Print Network 3.0 - automating spreadsheet discovery Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Information Sciences 56 Automated Test Case Generation for Spreadsheets Marc Fisher, Mingming Cao, Gregg Rothermel, Curtis R. Cook, Margaret M. Burnett Summary: Automated Test...

69

Use of Wingz spreadsheet as an interface to total-system performance assessment  

SciTech Connect (OSTI)

A commercial spreadsheet has been used as an interface to a set of simple models to simulate possible nominal flow and failure scenarios at the potential high-level nuclear waste repository at Yucca Mountain, Nevada. Individual models coded in FORTRAN are linked to the spreadsheet. Complementary cumulative probability distribution functions resulting from the models are plotted through scripts associated with the spreadsheet. All codes are maintained under a source code control system for quality assurance. The spreadsheet and the simple models can be run on workstations, PCs, and Macintoshes. The software system is designed so that the FORTRAN codes can be run on several machines if a network environment is available.

Chambers, W.F.; Treadway, A.H.

1992-01-01T23:59:59.000Z

70

Geothermal Electricity Technology Evaluation Model (GETEM) Individual Case Files and Summary Spreadsheet (GETEM version Spring 2013)  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

This group of files-- 10 GETEM individual case files and 1 summary spreadsheet-- contain final data from the revisions between summer 2011 and spring 2013.

Hanson, Steven CJ

71

Geothermal Electricity Technology Evaluation Model (GETEM) Individual Case Files and Summary Spreadsheet (GETEM version Spring 2013)  

SciTech Connect (OSTI)

This group of files-- 10 GETEM individual case files and 1 summary spreadsheet-- contain final data from the revisions between summer 2011 and spring 2013.

Hanson, Steven CJ

2013-03-07T23:59:59.000Z

72

Property:Geothermal/NumberOfArraProjectTypeTopic2 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:PlugNumberOfArraProjectTypeTopic2 Jump to: navigation, search

73

More Than 1,000 Fuel Cell Units Deployed Through DOE ARRA Funding (Fact Sheet)  

SciTech Connect (OSTI)

This NREL Hydrogen and Fuel Cell Technical Highlight describes how early market end users are operating 1,111 fuel cell units at 301 sites in 20 states with funding from the U.S. Department of Energy Fuel Cell Technologies Program and analysis by NREL. The American Recovery and Reinvestment Act (ARRA) funded the deployment of approximately 1,000 fuel cell systems in key early markets to accelerate the commercialization and deployment of fuel cells and fuel cell manufacturing, installation, maintenance, and support services. In support of the ARRA fuel cell deployment objectives, NREL analyzes and validates the technology in real-world applications, reports on the technology status, and facilitates the development of fuel cell technologies, manufacturing, and operations in strategic markets-including material handling equipment, backup power, and stationary power-where fuel cells can compete with conventional technologies. NREL is validating hydrogen and fuel cell systems in real-world settings through data collection, analysis, and reporting. The fuel cell and infrastructure analysis provides an independent, third-party assessment that focuses on fuel cell system and hydrogen infrastructure performance, operation, maintenance, use, and safety. An objective of the ARRA fuel cell project-to deploy approximately 1,000 fuel cell systems in key early markets - has been met in two years. By the end of 2011, 504 material handling equipment (MHE) fuel cell units were operating at 8 facilities and 607 backup power fuel cell units were operating at 293 sites. MHE and backup power are two markets where fuel cells are capable of meeting the operating demands, and deployments can be leveraged to accelerate fuel cell commercialization.

Not Available

2012-07-01T23:59:59.000Z

74

A spreadsheet for analyzing the in situ performance of fluorescent luminaires  

SciTech Connect (OSTI)

A spreadsheet program for determining system efficacy, power input and light output of common 4 ft fluorescent lighting systems under realistic operating conditions is described. The program uses accepted IES engineering principles to precisely account for ballast factor, existing thermal conditions and maintenance practices. The spreadsheet, which includes a data base of lamp and ballast performance data, can be used to calculate the cost-effectiveness of many common lighting retrofits.

Rubinstein, F.; Zhang, Chin.

1991-08-01T23:59:59.000Z

75

Guidebook for ARRA Smart Grid Program Metrics and Benefits | Department of  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAX POLICIES7.pdfFuel Cell VehicleEnergyGreensburgUMTRCAEnergy Guidebook for ARRA

76

Energy Storage R&D and ARRA | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat PumpRecord ofESPC ENABLE:2009Applications - Report |ofSectorSTORAGEand ARRA Energy

77

Portable cutting apparatus  

DOE Patents [OSTI]

A remotely operable, portable cutting apparatus detachably secured to the workpiece by laterally spaced clamp assemblies engageable with the workpiece on opposite sides of the intended line of cut. A reciprocal cutter head is mounted between the clamp assemblies and is provided with a traveling abrasive cutting wire adapted to sever the workpiece normal to the longitudinal axis thereof. Dust and debris are withdrawn from the cutting area by a vacuum force through a nozzle mounted on the cutting head.

Gilmore, Richard F. (Kennewick, WA)

1986-01-01T23:59:59.000Z

78

American Recovery and Reinvestment Act of 2009 (ARRA) Cost Share: Alternative and Renewable Fuel and Vehicle Technology Program.  

E-Print Network [OSTI]

and other matching funds instead of federal dollars, does this exclude us from the process? Will the Energy and Renewable Fuel and Vehicle Technology Program. Questions and Answers as of 4/27/09 1 1) Our county is working on a joint proposal for American Recovery and Reinvestment Act (ARRA) funds with other agencies

79

PON08010 American Recovery and Reinvestment Act of 2009 (ARRA) Cost Share: Alternative and Renewable Fuel and Vehicle Technology Program  

E-Print Network [OSTI]

and Renewable Fuel and Vehicle Technology Program Questions and Answers 4/27/09 to 5/1/09 Two questions (How far's solicitation "seek and obtain an award" through a federal ARRA solicitation. 3) May a project producing bio and Renewable Fuel and Vehicle Technology Program. The Energy Commission recommends that you submit a pre

80

Device for cutting protrusions  

DOE Patents [OSTI]

An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

Bzorgi, Fariborz M. (Knoxville, TN)

2011-07-05T23:59:59.000Z

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

SUPPLEMENT TO THE THIRD QUARTERLY REPORT ON THE ECONOMIC IMPACT OF THE AMERICAN RECOVERY AND REINVESTMENT ACT OF 2009 THE ARRA AND THE CLEAN ENERGY TRANSFORMATION  

E-Print Network [OSTI]

A central piece of the American Recovery and Reinvestment Act of 2009 (ARRA) is more than $90 billion in government investment and tax incentives to lay the foundation for the clean energy economy of the future. As discussed in CEAs Second Quarterly Report on the impact of the ARRA, this investment will help create a new generation of jobs, reduce dependence on oil, enhance national security, and improve the environment. 1 Ultimately, the investments could help transform the United States into a global clean energy leader. The ARRA clean energy investments are also providing crucial stimulus to the economy. Through programs such as enhanced tax credits for homeowners who make energy-efficient improvements, funding for research into new clean energy technologies, or grants to qualifying businesses, these investments are generating economic activity and creating new employment opportunities. This supplement to the CEAs Third Quarterly Report updates our estimates of the effect of the ARRAs clean energy provisions on economic recovery through the first quarter of 2010. We find that the Recovery Act directly created more than 80,000 clean energy jobs in the first quarter of 2010, and that the clean energy investments supported an additional 20,000

Council Of Economic Advisers

2010-01-01T23:59:59.000Z

82

THE POSITIVE IMPACTS OF AMERICAN REINVESTMENT AND RECOVERY ACT (ARRA) FUNDING TO THE WASTE MANAGEMENT PROGRAM ON HANFORD'S PLATEAU REMEDIATION PROJECT  

SciTech Connect (OSTI)

In April 2009, the Department of Energy (DOE) Richland Operations Office (RL) was allocated $1.6 billion (B) in ARRA funding to be applied to cleanup projects at the Hanford Site. DOE-RL selected projects to receive ARRA funding based on 3-criteria: creating/saving jobs, reducing the footprint of the Hanford Site, and reducing life-cycle costs for cleanup. They further selected projects that were currently covered under regulatory documents and existing prime contracts, which allowed work to proceed quickly. CH2M HILL Plateau Remediation Company (CHPRC) is a prime contractor to the DOE focused on the environmental cleanup of the DOE Hanford Site Central Plateau. CHPRC was slated to receive $1.36B in ARRA funding. As of January, 2010, CHPRC has awarded over $200 million (M) in subcontracts (64% to small businesses), created more that 1,100 jobs, and touched more than 2,300 lives - all in support of long-term objectives for remediation of the Central Plateau, on or ahead of schedule. ARRA funding is being used to accelerate and augment cleanup activities already underway under the baseline Plateau Remediation Contract (PRC). This paper details challenges and accomplishments using ARRA funding to meet DOE-RL objectives of creating/saving jobs, expediting cleanup, and reducing lifecycle costs for cleanup during the first months of implementation.

BLACKFORD LT

2010-01-19T23:59:59.000Z

83

ADVANCED CUTTINGS TRANSPORT STUDY  

SciTech Connect (OSTI)

This is the second quarterly progress report for Year-4 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between October 1, 2002 and December 30, 2002. This report presents a review of progress on the following specific tasks. (a) Design and development of an Advanced Cuttings Transport Facility Task 3: Addition of a Cuttings Injection/Separation System, Task 4: Addition of a Pipe Rotation System. (b) New research project (Task 9b): ''Development of a Foam Generator/Viscometer for Elevated Pressure and Elevated Temperature (EPET) Conditions''. (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions''. (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings. (Task 12), and Viscosity of Foam under EPET (Task 9b). (f) New Research project (Task 13): ''Study of Cuttings Transport with Foam under Elevated Pressure and Temperature Conditions''. (g) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (h) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Lei Zhou; Zhu Chen; Crystal Redden; Aimee Washington

2003-01-30T23:59:59.000Z

84

ADVANCED CUTTINGS TRANSPORT STUDY  

SciTech Connect (OSTI)

The Quarter began with installing the new drill pipe, hooking up the new hydraulic power unit, completing the pipe rotation system (Task 4 has been completed), and making the SWACO choke operational. Detailed design and procurement work is proceeding on a system to elevate the drill-string section. The prototype Foam Generator Cell has been completed by Temco and delivered. Work is currently underway to calibrate the system. Literature review and preliminary model development for cuttings transportation with polymer foam under EPET conditions are in progress. Preparations for preliminary cuttings transport experiments with polymer foam have been completed. Two nuclear densitometers were re-calibrated. Drill pipe rotation system was tested up to 250 RPM. Water flow tests were conducted while rotating the drill pipe up to 100 RPM. The accuracy of weight measurements for cuttings in the annulus was evaluated. Additional modifications of the cuttings collection system are being considered in order to obtain the desired accurate measurement of cuttings weight in the annular test section. Cutting transport experiments with aerated fluids are being conducted at EPET, and analyses of the collected data are in progress. The printed circuit board is functioning with acceptable noise level to measure cuttings concentration at static condition using ultrasonic method. We were able to conduct several tests using a standard low pass filter to eliminate high frequency noise. We tested to verify that we can distinguish between different depths of sand in a static bed of sand. We tested with water, air and a mix of the two mediums. Major modifications to the DTF have almost been completed. A stop-flow cell is being designed for the DTF, the ACTF and Foam Generator/Viscometer which will allow us to capture bubble images without the need for ultra fast shutter speeds or microsecond flash system.

Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mengjiao Yu; Ramadan Ahmed; Mark Pickell; Len Volk; Lei Zhou; Zhu Chen; Aimee Washington; Crystal Redden

2003-09-30T23:59:59.000Z

85

EM ARRA Best Practices and Lessons Learned Workshop: Overview from Thomas Johnson, Jr., Recovery Act Program Director  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power SystemsResources DOE ZeroThreeEnergyDepartment0: DOE512: Alaska EM ARRA BEST PRACTICES

86

ADVANCED CUTTINGS TRANSPORT STUDY  

SciTech Connect (OSTI)

The Advanced Cuttings Transport Study (ACTS) was a 5-year JIP project undertaken at the University of Tulsa (TU). The project was sponsored by the U.S. Department of Energy (DOE) and JIP member companies. The objectives of the project were: (1) to develop and construct a new research facility that would allow three-phase (gas, liquid and cuttings) flow experiments under ambient and EPET (elevated pressure and temperature) conditions, and at different angle of inclinations and drill pipe rotation speeds; (2) to conduct experiments and develop a data base for the industry and academia; and (3) to develop mechanistic models for optimization of drilling hydraulics and cuttings transport. This project consisted of research studies, flow loop construction and instrumentation development. Following a one-year period for basic flow loop construction, a proposal was submitted by TU to the DOE for a five-year project that was organized in such a manner as to provide a logical progression of research experiments as well as additions to the basic flow loop. The flow loop additions and improvements included: (1) elevated temperature capability; (2) two-phase (gas and liquid, foam etc.) capability; (3) cuttings injection and removal system; (4) drill pipe rotation system; and (5) drilling section elevation system. In parallel with the flow loop construction, hydraulics and cuttings transport studies were preformed using drilling foams and aerated muds. In addition, hydraulics and rheology of synthetic drilling fluids were investigated. The studies were performed under ambient and EPET conditions. The effects of temperature and pressure on the hydraulics and cuttings transport were investigated. Mechanistic models were developed to predict frictional pressure loss and cuttings transport in horizontal and near-horizontal configurations. Model predictions were compared with the measured data. Predominantly, model predictions show satisfactory agreements with the measured data. As a part of this project, instrumentation was developed to monitor cuttings beds and characterize foams in the flow loop. An ultrasonic-based monitoring system was developed to measure cuttings bed thickness in the flow loop. Data acquisition software controls the system and processes the data. Two foam generating devices were designed and developed to produce foams with specified quality and texture. The devices are equipped with a bubble recognition system and an in-line viscometer to measure bubble size distribution and foam rheology, respectively. The 5-year project is completed. Future research activities will be under the umbrella of Tulsa University Drilling Research Projects. Currently the flow loop is being used for testing cuttings transport capacity of aqueous and polymer-based foams under elevated pressure and temperature conditions. Subsequently, the effect of viscous sweeps on cuttings transport under elevated pressure and temperature conditions will be investigated using the flow loop. Other projects will follow now that the ''steady state'' phase of the project has been achieved.

Stefan Miska; Troy Reed; Ergun Kuru

2004-09-30T23:59:59.000Z

87

Prepared for Members and Committees of Congress The American Recovery and Reinvestment Act of 2009 (ARRA, P.L. 111-5) emphasizes jobs,  

E-Print Network [OSTI]

billion is provided in grants for state and local governments through three Department of Energy programs strategies to stabilize state and local government budgets. Energy provisions are a featured part of ARRA efficiency and renewable energy purposes; and the new Energy Efficiency and Conservation Block Grant Program

88

Solicitation and Selection of Partner Projects, Technical Team Leads, and Measurement and Validation Contractors for the American Recovery and Reinvestment Act (ARRA) Funded Commercial Building Partnerships (CBP-2)  

SciTech Connect (OSTI)

In March 2010, Pacific Northwest National Laboratory (PNNL) joined two other labs receiving ARRA funding, Lawrence Berkeley National Laboratory (LBNL) and the National Renewable National Laboratory (NREL), to began weekly conference calls with the goal of coordinating a joint lab solicitation to support the ARRA-funded CBP project. Two solicitations were identified for: 1) new CBP Partners; 2) technical contractors to provide technical assistance and measurement and verification (M&V) contractors. The M&V contractors support the work by providing model reviews and conducting monitoring studies to verify building performance. This report documents the process used by the labs for the solicitations, and describes the process and outcomes for PNNL, selection of candidate Partners, technical teams, and M&V contractors.

Nesse, Ronald J.; Baechler, Michael C.; Iverson, Megan M.

2010-09-30T23:59:59.000Z

89

Coal cutting research slashes dust  

SciTech Connect (OSTI)

The Coal-Cutting Technology Group at the Bureau of Mine's Twin Cities Research Center is investigating ways to reduce primary dust generated by coal cutting. The progression of research within the program is from fundamental laboratory research, to fundamental field research, to field concept verification. Then the Bureau recommends warranted changes and/or prototype development to industry. Currently the Cutting Technology Group has several projects in each phase of research. The Bureau's current fundamental studies of bit characteristics are directed to determining the effects of conical bit wear on primary respirable dust generation, energy, and cutting forces; establishing best conical bit mount condition to increase life by enhancing bit rotation; and comparing chisel-type cutters to conical-type cutters. Additionally, to establish a suitable homogeneous reference material for cutting experiments, a synthetic coal with a plaster base is being developed.

Roepke, W.W.

1983-10-01T23:59:59.000Z

90

Coal cutting research slashes dust  

SciTech Connect (OSTI)

US Bureau of Mines' research projects aimed at the reduction of coal dust during coal cutting operations are described. These include an investigation of the effects of conical bit wear on respirable dust generation, energy and cutting forces; the determination of the best conical bit mount condition to increase life by enhancing bit rotation; a comparison between chisel- and conical-type cutters. In order to establish a suitable homogeneous reference material for cutting experiments, a synthetic coal with a plaster base is being developed.

Roepke, W.W.

1983-10-01T23:59:59.000Z

91

Coal cutting research slashes dust  

SciTech Connect (OSTI)

The Coal-Cutting Technology Group at the Bureau of Mines Twin Cities (MN) Research Center is investigating ways to reduce primary dust generated by coal cutting. The progression of research within the program is from fundamental laboratory research, to fundamental field research, to field concept verification. Then the Bureau recommends warranted changes and/or prototype development to industry. Currently the group has several projects in each phase of research. The Bureau's current fundamental studies of bit characteristics are directed toward determining the effects of conical bit wear on primary respirable dust generation, energy, and cutting forces; establishing best conical bit mount condition to increase life by enhancing bit rotation; and comparing chisel-type cutters to conical-type cutters. Additionally, to establish a suitable homogeneous reference material for cutting experiments, a synthetic coal with a plaster base is being developed.

Roepke, W.W.

1983-10-01T23:59:59.000Z

92

Microwave assisted hard rock cutting  

DOE Patents [OSTI]

An apparatus for the sequential fracturing and cutting of subsurface volume of hard rock (102) in the strata (101) of a mining environment (100) by subjecting the volume of rock to a beam (25) of microwave energy to fracture the subsurface volume of rock by differential expansion; and , then bringing the cutting edge (52) of a piece of conventional mining machinery (50) into contact with the fractured rock (102).

Lindroth, David P. (Apple Valley, MN); Morrell, Roger J. (Bloomington, MN); Blair, James R. (Inver Grove Heights, MN)

1991-01-01T23:59:59.000Z

93

American Recovery and Reinvestment Act (ARRA) Federal Energy Management Program Technical Assistance Project 282 Renewable Energy Opportunities at Fort Gordon, Georgia  

SciTech Connect (OSTI)

This document provides an overview of renewable resource potential at Fort Gordon, based primarily upon analysis of secondary data sources supplemented with limited on-site evaluations. This effort focuses on grid-connected generation of electricity from renewable energy sources and also on ground source heat pumps for heating and cooling buildings. The effort was funded by the American Recovery and Reinvestment Act (ARRA) as follow-on to the 2005 Department of Defense (DoD) Renewables Assessment. The site visit to Fort Gordon took place on March 9, 2010.

Boyd, Brian K.; Gorrissen, Willy J.; Hand, James R.; Horner, Jacob A.; Orrell, Alice C.; Russo, Bryan J.; Weimar, Mark R.; Williamson, Jennifer L.; Nesse, Ronald J.

2010-09-30T23:59:59.000Z

94

Hypervelocity cutting machine and method  

DOE Patents [OSTI]

A method and machine are provided for cutting a workpiece such as concrete. A gun barrel is provided for repetitively loading projectiles therein and is supplied with a pressurized propellant from a storage tank. A thermal storage tank is disposed between the propellant storage tank and the gun barrel for repetitively receiving and heating propellant charges which are released in the gun barrel for repetitively firing projectiles therefrom toward the workpiece. In a preferred embodiment, hypervelocity of the projectiles is obtained for cutting the concrete workpiece by fracturing thereof. 10 figs.

Powell, J.R.; Reich, M.

1996-11-12T23:59:59.000Z

95

Microbiopsy/precision cutting devices  

DOE Patents [OSTI]

Devices are disclosed for performing tissue biopsy on a small scale (microbiopsy). By reducing the size of the biopsy tool and removing only a small amount of tissue or other material in a minimally invasive manner, the risks, costs, injury and patient discomfort associated with traditional biopsy procedures can be reduced. By using micromachining and precision machining capabilities, it is possible to fabricate small biopsy/cutting devices from silicon. These devices can be used in one of four ways (1) intravascularly, (2) extravascularly, (3) by vessel puncture, and (4) externally. Additionally, the devices may be used in precision surgical cutting. 6 figs.

Krulevitch, P.A.; Lee, A.P.; Northrup, M.A.; Benett, W.J.

1999-07-27T23:59:59.000Z

96

Microbiopsy/precision cutting devices  

DOE Patents [OSTI]

Devices for performing tissue biopsy on a small scale (microbiopsy). By reducing the size of the biopsy tool and removing only a small amount of tissue or other material in a minimally invasive manner, the risks, costs, injury and patient discomfort associated with traditional biopsy procedures can be reduced. By using micromachining and precision machining capabilities, it is possible to fabricate small biopsy/cutting devices from silicon. These devices can be used in one of four ways 1) intravascularly, 2) extravascularly, 3) by vessel puncture, and 4) externally. Additionally, the devices may be used in precision surgical cutting.

Krulevitch, Peter A. (Pleasanton, CA); Lee, Abraham P. (Walnut Creek, CA); Northrup, M. Allen (Berkeley, CA); Benett, William J. (Livermore, CA)

1999-01-01T23:59:59.000Z

97

Hypervelocity cutting machine and method  

DOE Patents [OSTI]

A method and machine 14 are provided for cutting a workpiece 12 such as concrete. A gun barrel 16 is provided for repetitively loading projectiles 22 therein and is supplied with a pressurized propellant from a storage tank 28. A thermal storage tank 32,32A is disposed between the propellant storage tank 28 and the gun barrel 16 for repetitively receiving and heating propellant charges which are released in the gun barrel 16 for repetitively firing projectiles 22 therefrom toward the workpiece 12. In a preferred embodiment, hypervelocity of the projectiles 22 is obtained for cutting the concrete workpiece 12 by fracturing thereof.

Powell, James R. (Shoreham, NY); Reich, Morris (Queens, NY)

1996-11-12T23:59:59.000Z

98

Automated internal pipe cutting device  

DOE Patents [OSTI]

The invention is a remotely controlled internal pipe cutting device primarily used for cutting pipes where the outside of the pipe is inaccessible at the line where the cut is to be made. The device includes an axial ram within a rotational cylinder which is enclosed in a housing. The housing is adapted for attachment to an open end of the pipe and for supporting the ram and cylinder in cantilever fashion within the pipe. A radially movable cutter, preferably a plasma arc torch, is attached to the distal end of the ram. A drive mechanism, containing motors and mechanical hardware for operating the ram and cylinder, is attached to the proximal end of the housing. The ram and cylinder provide for moving the cutter axially and circumferentially, and a cable assembly attached to a remote motor provide for the movement of the cutter radially, within the pipe. The control system can be adjusted and operated remotely to control the position and movement of the cutter to obtain the desired cut. The control system can also provide automatic standoff control for a plasma arc torch.

Godlewski, William J. (Clifton Park, NY); Haffke, Gary S. (Ballston Spa, NY); Purvis, Dale (Amsterdam, NY); Bashar, Ronald W. (Oakdale, CT); Jones, Stewart D. (Mechanicville, NY); Moretti, Jr., Henry (Cranston, RI); Pimentel, James (Warwick, RI)

2003-01-21T23:59:59.000Z

99

Optimization Online - Branch-and-cut and Branch-and-cut-and-price ...  

E-Print Network [OSTI]

Jan 27, 2014 ... Branch-and-cut and Branch-and-cut-and-price Algorithms for the Adjacent Only Quadratic Minimum Spanning Tree Problem. Dilson Lucas...

Dilson Lucas Pereira

2014-01-27T23:59:59.000Z

100

Cuttings Analysis At International Geothermal Area, Indonesia...  

Open Energy Info (EERE)

Indonesia (Laney, 2005) Exploration Activity Details Location International Geothermal Area Indonesia Exploration Technique Cuttings Analysis Activity Date Usefulness not indicated...

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Cuttings Analysis At International Geothermal Area, Philippines...  

Open Energy Info (EERE)

Cuttings Analysis At International Geothermal Area, Philippines (Laney, 2005) Exploration Activity Details Location International Geothermal Area Philippines Exploration Technique...

102

WELDING AND CUTTING 10.A GENERAL  

E-Print Network [OSTI]

EM 385-1-1 XX Jun 13 10-1 SECTION 10 WELDING AND CUTTING 10.A GENERAL 10.A.01 Welders, cutters, and their supervisor shall be trained in the safe operation of their equipment, safe welding/cutting practices, and welding/cutting respiratory and fire protection. > AIHA publication "Welding Health and Safety: A Field

US Army Corps of Engineers

103

Free-piston cutting machine  

DOE Patents [OSTI]

A cutting machine includes a gun barrel for receiving a projectile. A compression tube is disposed in flow communication with the barrel and includes a piston therein. A reservoir is disposed in flow communication with the tube and receives a first gas under pressure. A second gas fills the compression tube on a front face of the piston. And, the pressurized first gas is discharged into the tube on a back face of the piston to accelerate the piston through the tube for compressing the second gas, and in turn launching the projectile through the barrel to impact a workpiece.

Ciccarelli, Gaby (East Setauket, NY); Subudhi, Manomohan (East Setauket, NY); Hall, Robert E. (Port Jefferson, NY)

2000-01-01T23:59:59.000Z

104

Cuttings Analysis | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable Solutions LLC JumpCrow Lake Wind JumpCuttings Analysis At NewInformation

105

Microsoft Word - ARRA Cover  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't32 Master EM ManagementWe2.docAL-2006-105.docARPA-E WORKSHOP

106

Microsoft Word - ARRA cover  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't32 Master EM ManagementWe2.docAL-2006-105.docARPA-E U.S.

107

The ARRA EAP En  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesignOfficeThe 21st Century Truck Partnership0 THE

108

The ARRA EAP En  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesignOfficeThe 21st Century Truck Partnership0

109

The ARRA EAP En  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesignOfficeThe 21st Century Truck

110

The ARRA EAP En  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesignOfficeThe 21st Century TruckAPRIL 1, 2011 THE

111

The ARRA EAP En  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesignOfficeThe 21st Century TruckAPRIL 1, 2011 THE1

112

Berkeley Lab - ARRA - Home  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6 M. Babzien, I. Ben-Zvi,Benefits Planab initio DFT-DDue

113

Sandia National Laboratories: ARRA  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0 ResourceAwardsSafeguardsEngineers WindARPA-E ARPAe:

114

Cutting sound enhancement system for mining machines  

DOE Patents [OSTI]

A cutting sound enhancement system (10) for transmitting an audible signal from the cutting head (101) of a piece of mine machinery (100) to an operator at a remote station (200), wherein, the operator using a headphone unit (14) can monitor the difference in sounds being made solely by the cutting head (101) to determine the location of the roof, floor, and walls of a coal seam (50).

Leigh, Michael C. (Coal Center, PA); Kwitowski, August J. (Clairton, PA)

1992-01-01T23:59:59.000Z

115

Drilling subsurface wellbores with cutting structures  

DOE Patents [OSTI]

A system for forming a wellbore includes a drill tubular. A drill bit is coupled to the drill tubular. One or more cutting structures are coupled to the drill tubular above the drill bit. The cutting structures remove at least a portion of formation that extends into the wellbore formed by the drill bit.

Mansure, Arthur James (Alburquerque, NM); Guimerans, Rosalvina Ramona (The Woodlands, TX)

2010-11-30T23:59:59.000Z

116

Corner-cutting mining assembly  

DOE Patents [OSTI]

This invention resulted from a contract with the United States Department of Energy and relates to a mining tool. More particularly, the invention relates to an assembly capable of drilling a hole having a square cross-sectional shape with radiused corners. In mining operations in which conventional auger-type drills are used to form a series of parallel, cylindrical holes in a coal seam, a large amount of coal remains in place in the seam because the shape of the holes leaves thick webs between the holes. A higher percentage of coal can be mined from a seam by a means capable of drilling holes having a substantially square cross section. It is an object of this invention to provide an improved mining apparatus by means of which the amount of coal recovered from a seam deposit can be increased. Another object of the invention is to provide a drilling assembly which cuts corners in a hole having a circular cross section. These objects and other advantages are attained by a preferred embodiment of the invention.

Bradley, J.A.

1981-07-01T23:59:59.000Z

117

Development and demonstration of an enhanced spreadsheet-based well log analysis software. Final report, May 1998  

SciTech Connect (OSTI)

The Advanced Class Work Program is a field-based research and demonstration program for demonstration of advanced or improved technologies identified in the Department of Energy`s Class Field Demonstration Projects. The objective of the Advanced Class Work program is to conduct field demonstrations of technologies for which a small, incremental amount of work will produce or improve a transferable, useful technology for oil recovery. The goal of the program is to enhance the products of near-term Class projects and maximize the applicability and effectiveness of project results. PfEFFER (Petrofacies Evaluation of Formations For Engineering Reservoirs) is a well log analysis computer package. The software was tested and successfully applied in Schaben Field, a DOE Class 2 Field Demonstration Project to assist in improving reservoir characterization and assessing reservoir performance. PfEFFER v.1 was released in January, 1996 as a commercial spreadsheet-based well-log analysis program developed and distributed through the Kansas Geological Survey. The objectives of this project were: Task 1 -- Enhance the PfEFFER software package; Task 2 -- Develop major new modules to significantly augment PfEFFER capabilities; Task 3 -- Conduct field demonstration of software application using the necessary reservoir data acquired from oil operators and construct a database; and Task 4 -- Perform technology transfer activities that include workshops, reports, presentations, or other methods to communicate results to interested parties.

Watney, W.L.; Doveton, J.H.; Guy, W.J.

1998-10-01T23:59:59.000Z

118

Nonlinear dynamics of a regenerative cutting process  

E-Print Network [OSTI]

We examine the regenerative cutting process by using a single degree of freedom non-smooth model with a friction component and a time delay term. Instead of the standard Lyapunov exponent calculations, we propose a statistical 0-1 test analysis for chaos detection. This approach reveals the nature of the cutting process signaling regular or chaotic dynamics. For the investigated deterministic model we are able to show a transition from chaotic to regular motion with increasing cutting speed. For two values of time delay showing the different response the results have been confirmed by the means of the spectral density and the multiscaled entropy.

Grzegorz Litak; Sven Schubert; Guenter Radons

2012-01-24T23:59:59.000Z

119

California Budget Cuts Fray the Long-Term Safety Net  

E-Print Network [OSTI]

of Californias 2009 Budget Cuts. Los Angeles, CA: UCLABrief October 2009 California Budget Cuts Fray the Long-TermNadereh Pourat T he deep budget cuts enacted by Californias

Wallace, Steven P.; Benjamin, A. E.; Villa, Valentine M.; Pourat, Nadereh

2009-01-01T23:59:59.000Z

120

Effective Separation of Disjunctive Cuts for Convex Mixed Integer ...  

E-Print Network [OSTI]

This limits the total effort we spend generating cuts and helps to maintain numerical stability of (CGLP). If a cut is generated by Algorithm 2 that separates

2010-11-11T23:59:59.000Z

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

DOE Honors WIPP Representative for Cutting Travel Costs, Greenhouse...  

Energy Savers [EERE]

DOE Honors WIPP Representative for Cutting Travel Costs, Greenhouse Gas Emissions DOE Honors WIPP Representative for Cutting Travel Costs, Greenhouse Gas Emissions June 29, 2012 -...

122

California: Cutting-Edge Biofuels Research and Entrepreneurship...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Cutting-Edge Biofuels Research and Entrepreneurship Provide a Proving Ground California: Cutting-Edge Biofuels Research and Entrepreneurship Provide a Proving Ground April 18, 2013...

123

On the generation of cutting planes which maximize the bound ...  

E-Print Network [OSTI]

cutting plane generation in Mixed Integer Programming allowing for the simultaneous generation of k cuts which, when added to the current Linear Programming...

2014-09-23T23:59:59.000Z

124

New Process for Producing Styrene Cuts Costs, Saves Energy, and...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Process for Producing Styrene Cuts Costs, Saves Energy, and Reduces Greenhouse Gas Emissions New Process for Producing Styrene Cuts Costs, Saves Energy, and Reduces Greenhouse Gas...

125

Composition of carcasses and retail cuts from lightweight heifers  

E-Print Network [OSTI]

Committee: Dr. H. R. cross Dr. J, W, Savell Twenty-nine sides from lightweight heifer carcasses, ranging from 113 to 250 kg, were fabricated into wholesale and retail cuts using standardized procedures. Retail cuts were trimmed to either zero or 0. 64... were below the ten percent fat level. Retail cut yields from the chuck, rib, loin and round for both trim levels were considerably lower than those reported in other studies. Retail cut yield from the four major wholesale cuts increased...

Guzman Mirabal, Luis Alejandro

1986-01-01T23:59:59.000Z

126

Estimating Policy-Driven Greenhouse Gas Emissions Trajectories in California: The California Greenhouse Gas Inventory Spreadsheet (GHGIS) Model  

SciTech Connect (OSTI)

A California Greenhouse Gas Inventory Spreadsheet (GHGIS) model was developed to explore the impact of combinations of state policies on state greenhouse gas (GHG) and regional criteria pollutant emissions. The model included representations of all GHG- emitting sectors of the California economy (including those outside the energy sector, such as high global warming potential gases, waste treatment, agriculture and forestry) in varying degrees of detail, and was carefully calibrated using available data and projections from multiple state agencies and other sources. Starting from basic drivers such as population, numbers of households, gross state product, numbers of vehicles, etc., the model calculated energy demands by type (various types of liquid and gaseous hydrocarbon fuels, electricity and hydrogen), and finally calculated emissions of GHGs and three criteria pollutants: reactive organic gases (ROG), nitrogen oxides (NOx), and fine (2.5 ?m) particulate matter (PM2.5). Calculations were generally statewide, but in some sectors, criteria pollutants were also calculated for two regional air basins: the South Coast Air Basin (SCAB) and the San Joaquin Valley (SJV). Three scenarios were developed that attempt to model: (1) all committed policies, (2) additional, uncommitted policy targets and (3) potential technology and market futures. Each scenario received extensive input from state energy planning agencies, in particular the California Air Resources Board. Results indicate that all three scenarios are able to meet the 2020 statewide GHG targets, and by 2030, statewide GHG emissions range from between 208 and 396 MtCO2/yr. However, none of the scenarios are able to meet the 2050 GHG target of 85 MtCO2/yr, with emissions ranging from 188 to 444 MtCO2/yr, so additional policies will need to be developed for California to meet this stringent future target. A full sensitivity study of major scenario assumptions was also performed. In terms of criteria pollutants, targets were less well-defined, but while all three scenarios were able to make significant reductions in ROG, NOx and PM2.5 both statewide and in the two regional air basins, they may nonetheless fall short of what will be required by future federal standards. Specifically, in Scenario 1, regional NOx emissions are approximately three times the estimated targets for both 2023 and 2032, and in Scenarios 2 and 3, NOx emissions are approximately twice the estimated targets. Further work is required in this area, including detailed regional air quality modeling, in order to determine likely pathways for attaining these stringent targets.

Greenblatt, Jeffery B.

2013-10-10T23:59:59.000Z

127

CRAD, Welding, Cutting and Brazing Assessment Plan  

Broader source: Energy.gov [DOE]

This assessment is to verify hot work requirements associated with welding, cutting, burning, brazing, grinding and other spark- or flame-producing operations have been implemented. Verify that the requirements implemented are appropriate for preventing loss of life and property from fire, and personal injury from contact with or exposure to molten metals, vapors, radiant energy, injurious rays and sparks.

128

Accelerators: powering cutting-edge research  

E-Print Network [OSTI]

Accelerators: powering cutting-edge research #12;What is a particle accelerator? Booster ourselves. Particle accelerators are our attempt to turn back the clock and see into the early stages of the Universe. They accelerate everyday charged particles (electrons or protons) to close to the speed of light

Crowther, Paul

129

On the complexity of cutting plane proofs using split cuts Sanjeeb ...  

E-Print Network [OSTI]

Jun 16, 2008 ... Page 1 ... The complexity of different types of cutting-plane proofs has been a much studied topic in recent years. Some well-known classes of...

2008-06-16T23:59:59.000Z

130

Keeping the Lights on While Cutting Costs.  

SciTech Connect (OSTI)

In 1992, the Bonneville Power Administration spent $361 million in capital on a system to transmit electricity. By 1998, it was spending about one-third that amount: $123 million. In 1992, BPA`s expenses for managing, operating and maintaining the transmission system ran $160 million. By 1998, BPA had cut expenses to $128 million. Maintenance costs alone were cut 28%. In 1992, management of the grid was split into six organizations. Today, there is one. About 2,900 people worked for transmission in October 1992. By February 1998, the Transmission Business Line (TBL) employed 1,855. Transmission in 1992 for the most part meant new towers, lines and substations. Today it means computers, digital communications and electronic controls.

United States. Bonneville Power Administration.

1998-08-01T23:59:59.000Z

131

GEODESIC HAM-SANDWICH CUTS Prosenjit Bose  

E-Print Network [OSTI]

GEODESIC HAM-SANDWICH CUTS Prosenjit Bose Erik D. Demaine Ferran Hurtado§ John Iacono¶ Stefan contains r red points and b blue points in its interior. Let n = m + r + b. A ham-sandwich geodesic and the blue points. We present an O(n log k)-time algorithm for finding a ham-sandwich geodesic. We also show

Iacono, John

132

CUTTING -WELDING -HOT WORKS REQUIRED NOTIFICATION TO CUFD  

E-Print Network [OSTI]

CUTTING - WELDING - HOT WORKS REQUIRED NOTIFICATION TO CUFD Instructions: Fill out this form in its Time for work: Description of Work: Brazing Roofing Sweating WeldingSolderingCutting Other

Stuart, Steven J.

133

Computational experience with general cutting planes for the Set ...  

E-Print Network [OSTI]

... Linear Programming, Integer Programming and Cutting Planes, Ph.D. Thesis, .... To this purpose, after a violated cut cT x ? d is found during the search tree,...

2007-09-02T23:59:59.000Z

134

Arkansan Worker Cuts Bills After Auto Job Layoff | Department...  

Broader source: Energy.gov (indexed) [DOE]

Arkansan Worker Cuts Bills After Auto Job Layoff Arkansan Worker Cuts Bills After Auto Job Layoff November 24, 2009 - 3:34pm Addthis Joshua DeLung The wind used to howl around the...

135

Baltimore Vet Cuts Energy Bills With Solar | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Baltimore Vet Cuts Energy Bills With Solar Baltimore Vet Cuts Energy Bills With Solar October 28, 2010 - 5:09pm Addthis Baltimore resident Paul Bennett installed 14 solar panels...

136

Cutting NOx from Diesel Engines with Membrane-Generated Nitrogen...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Cutting NOx from Diesel Engines with Membrane-Generated Nitrogen-Enriched Air Cutting NOx from Diesel Engines with Membrane-Generated Nitrogen-Enriched Air 2005 Diesel Engine...

137

Cuttings Analysis At Roosevelt Hot Springs Area (Christensen...  

Open Energy Info (EERE)

navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Cuttings Analysis At Roosevelt Hot Springs Area (Christensen, Et Al., 1983) Exploration Activity...

138

Parallel Shell Cut Yongchang JI (yji@cs.ucf.edu)  

E-Print Network [OSTI]

_weight is the weight used for soft cut. In the cutting range, from inner_rad or outer_rad up to cut_step pixels's inside nucleic acid and outside empty noise. PCUT use as input: 3D density maps generated by P3DR, output : ------------------------------------------------------------------------ inputmapname (C) outputcutmapname (C) inner_rad, outer_rad, cut_step, drop_weight (I, I, I, F

Baker, Timothy S.

139

Deficit Reduction: $38 Billion Wont Cut It  

E-Print Network [OSTI]

Tea Partiers claim that we can simultaneously cut expenditures and taxes. The deficit problem is huge and fixing it will affect us all. Cuts in Medicare, Medicaid, and Social Security must be part of any solution. Even with big spending cuts, tax...

Griffin, James M.; Taylor, Lori L.

140

What Energy Functions can be Minimized via Graph Cuts?  

E-Print Network [OSTI]

What Energy Functions can be Minimized via Graph Cuts? Vladimir Kolmogorov and Ramin Zabih Computer. In the last few years, several new algorithms based on graph cuts have been developed to solve energy cut on the graph also minimizes the energy. Yet because these graph constructions are complex

Field, David

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

results and benefits... Birmingham Cutting your CO2  

E-Print Network [OSTI]

results and benefits... Birmingham Cutting your CO2 Birmingham City Council July 2007 c a s e s t u of the BirminghamCutting CO2 campaign, news items, display materials etc. · Advising on pledge gathering materials system was launched in July 2007 as part of the `Birmingham Cutting Your CO2' campaign. By the end

Everest, Graham R

142

Micromachined cutting blade formed from {211}-oriented silicon  

DOE Patents [OSTI]

A cutting blade is disclosed fabricated of micromachined silicon. The cutting blade utilizes a monocrystalline silicon substrate having a {211} crystalline orientation to form one or more cutting edges that are defined by the intersection of {211} crystalline planes of silicon with {111} crystalline planes of silicon. This results in a cutting blade which has a shallow cutting-edge angle .theta. of 19.5.degree.. The micromachined cutting blade can be formed using an anisotropic wet etching process which substantially terminates etching upon reaching the {111} crystalline planes of silicon. This allows multiple blades to be batch fabricated on a common substrate and separated for packaging and use. The micromachined cutting blade, which can be mounted to a handle in tension and optionally coated for increased wear resistance and biocompatibility, has multiple applications including eye surgery (LASIK procedure).

Fleming, James G. (Albuquerque, NM); Fleming, legal representative, Carol (Burbank, CA); Sniegowski, Jeffry J. (Tijeras, NM); Montague, Stephen (Albuquerque, NM)

2011-08-09T23:59:59.000Z

143

Category:Cuttings Analysis | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBostonFacilityCascade SierraStatus Status ofCore AnalysisCuttings

144

The contour method cutting assumption: error minimization and correction  

SciTech Connect (OSTI)

The recently developed contour method can measure 2-D, cross-sectional residual-stress map. A part is cut in two using a precise and low-stress cutting technique such as electric discharge machining. The contours of the new surfaces created by the cut, which will not be flat if residual stresses are relaxed by the cutting, are then measured and used to calculate the original residual stresses. The precise nature of the assumption about the cut is presented theoretically and is evaluated experimentally. Simply assuming a flat cut is overly restrictive and misleading. The critical assumption is that the width of the cut, when measured in the original, undeformed configuration of the body is constant. Stresses at the cut tip during cutting cause the material to deform, which causes errors. The effect of such cutting errors on the measured stresses is presented. The important parameters are quantified. Experimental procedures for minimizing these errors are presented. An iterative finite element procedure to correct for the errors is also presented. The correction procedure is demonstrated on experimental data from a steel beam that was plastically bent to put in a known profile of residual stresses.

Prime, Michael B [Los Alamos National Laboratory; Kastengren, Alan L [ANL

2010-01-01T23:59:59.000Z

145

Hanford ARRA Photogallery - Hanford Site  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

strontium-90 Well Installation Well Installation Drilling Treatment Wells at 100N Drilling Treatment Wells at 100N Drilling Treatment Wells at 100N Drilling Treatment Wells at 100N...

146

AVTA: ARRA EV Project Overview  

Broader source: Energy.gov [DOE]

The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following document describes the context of the EV Project, which partnered with city, regional and state governments, utilities, and other organizations in 16 cities to deploy about 14,000 Level 2 PEV chargers and 300 DC fast chargers. It also deployed 5,700 all-electric Nissan Leafs and 2,600 plug-in hybrid electric Chevrolet Volts.

147

SEP/ARRA Evaluation Webinar  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energy fromCommentsRevolving Loan FundsDepartment ofNO.FEVerySEP and

148

Properties of a Cutting Plane Method for Semidefinite Programming1  

E-Print Network [OSTI]

Jul 11, 2012 ... Several techniques have been developed to solve large scale ...... posed gauging the strength of a cutting plane by examining the dimension of...

2012-07-11T23:59:59.000Z

149

Modeling Two-Dimensional Guillotine Cutting Problems via Integer ...  

E-Print Network [OSTI]

Cutting and reuse: an application from automobile component manufacturing. Operations Research, 50:923934, 2002. [3] J.A. Bennell, J.F. Oliveira and G.

2014-11-25T23:59:59.000Z

150

Cuttings Analysis At Long Valley Caldera Geothermal Area (Pribnow...  

Open Energy Info (EERE)

Cuttings Analysis Activity Date - 2003 Usefulness useful DOE-funding Unknown Notes "Here we present a detailed thermal conductivity profile for LVEW (Fig. 5a). Measurements were...

151

Cuttings Analysis At Fenton Hill HDR Geothermal Area (Laughlin...  

Open Energy Info (EERE)

navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Cuttings Analysis At Fenton Hill HDR Geothermal Area (Laughlin, Et Al., 1983) Exploration Activity...

152

Implementing the simplex method as a cutting-plane method  

E-Print Network [OSTI]

This is achieved by a broad enough initial set of cuts as we assumed that the ...... zation: Proceedings of the 4th French-German Conference on Optimization...

2011-06-26T23:59:59.000Z

153

Rapid Characterization of Drill Core and Cutting Mineralogy using...  

Open Energy Info (EERE)

Characterization of Drill Core and Cutting Mineralogy using Infrared Spectroscopy Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Rapid...

154

Forest County Potawatomi Tribe Cuts Emissions, Promotes Green...  

Energy Savers [EERE]

Emissions, Promotes Green Growth Forest County Potawatomi Tribe Cuts Emissions, Promotes Green Growth February 23, 2012 - 6:29pm Addthis The Forest County Potawatomi Tribe's solar...

155

Optimization Online - Cut Generation for Optimization Problems with ...  

E-Print Network [OSTI]

Jul 26, 2014 ... Cut Generation for Optimization Problems with Multivariate Risk Constraints. Simge Kkyavuz (kucukyavuz.2 ***at*** osu.edu) Nilay Noyan...

Simge Kkyavuz

2014-07-26T23:59:59.000Z

156

Cutting of single-walled carbon nanotubes (SWNT): (1) Cutting of pristine SWNT by ozonolysis; (2) Ozonolysis of functionalized SWNT; (3) Cutting ozonated SWNT by e-irradiation; (4) Cutting fluorinated SWNT by pyrolysis.  

E-Print Network [OSTI]

??Using perfluoropolyether as the solvent, cutting of pristine SWNT has been achieved by extensive ozonolysis with 80% carbon yield at room temperature. The intense disorder (more)

Chen, Zheyi

2006-01-01T23:59:59.000Z

157

Optimization Online - Robust Branch-Cut-and-Price Algorithms for ...  

E-Print Network [OSTI]

Jun 10, 2008 ... ... also presented, specially the development of new families of cuts over large extended formulations. ... the Optimization Technology Center.

Artur Pessoa

2008-06-10T23:59:59.000Z

158

Cowpea ratooning as affected by cultivar, cutting height, and time of cutting and its effect on nitrogen fixation  

E-Print Network [OSTI]

COWPEA RATOONING AS AFFECIZD BY CULTIVAR, CWRITING HEIGHT, AND TIME OF CUTTING AND ITS EFFECT ON NITROGEN FIXATION A Thesis by DOUGLAS CHARLES SCHEURING Submitted to the Office of Graduate Studies of Texas A&M University in partial... fulfillment of the requirements for the degree of MASTER OF SCIENCE August 1990 Major Subject: Horticulture COWPEA RATOONING AS AFFECTED BY CULTIVAR, CUTTING HEIGHT, AND TIME OF CUTTING AND ITS EFFECT ON NITROGEN FIXATION A Thesis by DOUGLAS CHARLES...

Scheuring, Douglas Charles

2012-06-07T23:59:59.000Z

159

Termination Semantics of Logic Programs with Cut and Related Features  

E-Print Network [OSTI]

Termination Semantics of Logic Programs with Cut and Related Features Jamie Andrews Dept of termination for logic programs. I am particularly interested in the termination of logic programs which use practical features such as the Prolog ``cut''. In order to prove termination of such programs

Giesl, Juergen

160

Hiroshi Ishikawa A Practical Introduction to Graph Cut  

E-Print Network [OSTI]

Technology Contents Overview / Brief history Energy minimization Graphs and their minimum cuts Energy Elevation map #12;History Probablistic methods (SA, ICM,...) have been used for energy minimization OR has Overview / Brief history Energy minimization Graphs and their minimum cuts Energy minimization via graph

Ishikawa, Hiroshi

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

What Energy Functions Can Be Minimized via Graph Cuts?  

E-Print Network [OSTI]

What Energy Functions Can Be Minimized via Graph Cuts? Vladimir Kolmogorov, Member, IEEE, and Ramin been developed to solve energy minimization problems in computer vision. Each of these techniques constructs a graph such that the minimum cut on the graph also minimizes the energy. Yet, because these graph

Field, David

162

A cutting surface algorithm for semi-infinite convex programming ...  

E-Print Network [OSTI]

Jun 16, 2013 ... this distribution optimization method and the cutting surface algorithm yields a ... We present a novel cutting surface algorithm for general ...... in their formulation are defined through bounds on the measure, bounds on the distance from a .... in Algorithm 2, in the remainder of this section we provide a short...

2013-06-16T23:59:59.000Z

163

Robust Branch-Cut-and-Price for the Capacitated Minimum ...  

E-Print Network [OSTI]

independently noted that cuts expressed in terms of variables from a suitable original ... The In-Degree constraints (1b) state that exactly one arc must enter each ...... of promising sets S, and (ii) the search for violated cuts by considering the...

2006-05-20T23:59:59.000Z

164

SF 2001-WLD;CONTRACTOR WELDING, CUTTING AND BRAZING  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

01-WLD (11-2012) Supersedes (4-2010) Issue CONTRACTOR WELDING, CUTTING, BRAZING P ART 1: CO NT R ACT O R' S E X PO S UR E AS S E S SM ENT Identify what welding, cutting andor...

165

Type Inference Builds a Short Cut to Deforestation Olaf Chitil  

E-Print Network [OSTI]

Type Inference Builds a Short Cut to Deforestation Olaf Chitil Lehrstuhl f¨ur Informatik II, RWTH Aachen, 52056 Aachen, Germany chitil@informatik.rwth-aachen.de Abstract Deforestation optimises structures. Short cut deforestation is a de- forestation method which is based on a single, local trans

Kent, University of

166

Simultaneous Segmentation and Filtering via Reduced Graph Cuts  

E-Print Network [OSTI]

provides small graphs while preserving thin structures but do not offer low memory usage when the amount [7,4,13]. In [7], binary energy functions are minimized for the shape fitting problem with graph cutsSimultaneous Segmentation and Filtering via Reduced Graph Cuts N. Lermé F. Malgouyres LAGA UMR CNRS

Malgouyres, François

167

Infrared cut-off proposal for the Holographic density  

E-Print Network [OSTI]

We propose an infrared cut-off for the holographic the dark-energy, which besides the square of the Hubble scale also contains the time derivative of the Hubble scale. This avoids the problem of causality which appears using the event horizon area as the cut-off, and solves the coincidence problem.

L. N. Granda; A. Oliveros

2008-10-16T23:59:59.000Z

168

Method and apparatus for diamond wire cutting of metal structures  

DOE Patents [OSTI]

A method and apparatus for diamond wire cutting of metal structures, such as nuclear reactor vessels, is provided. A diamond wire saw having a plurality of diamond beads with beveled or chamfered edges is provided for sawing into the walls of the metal structure. The diamond wire is guided by a plurality of support structures allowing for a multitude of different cuts. The diamond wire is cleaned and cooled by CO.sub.2 during the cutting process to prevent breakage of the wire and provide efficient cutting. Concrete can be provided within the metal structure to enhance cutting efficiency and reduce airborne contaminants. The invention can be remotely controlled to reduce exposure of workers to radioactivity and other hazards.

Parsells, Robert; Gettelfinger, Geoff; Perry, Erik; Rule, Keith

2005-04-19T23:59:59.000Z

169

Algorithms for Stochastic Integer Programs Using Fenchel Cutting Planes  

E-Print Network [OSTI]

to solve. 6 Honda Toyota Ford Ridgeline Accord Fit Tundra Camry Yaris F350 Focus Fiesta Truck Sedan HB Truck Sedan HB Truck Sedan HB Weight (lbs) 6,050 3,216 2,496 6,800 3,190 2,295 9,900 2,097 3,620 Length (inches) 207 195 162 229 189 154 233 179 160...-stage problems have been 11 almost exclusively restricted to disjunctive cut-generation schemes. In [29], lift-and- project cutting planes approach based on the ideas from [12] is used to solve problems with F = {B,C};S = {B,C}. Cutting planes are used...

Venkatachalam, Saravanan

2014-08-10T23:59:59.000Z

170

Breakthrough Cutting Technology Promises to Reduce Solar Costs...  

Broader source: Energy.gov (indexed) [DOE]

Silicon Genesis is a San Jose, Calif., company that is advancing the field of solar energy by developing a process that will virtually eliminate all waste when cutting materials...

171

A Branch-and-Cut Decomposition Algorithm for Solving Chance ...  

E-Print Network [OSTI]

remediation [10], and reliable network design [11, 12]. CCMPs have a ..... In addition, the set of possible inequalities that can be produced by the procedure SepCuts pro- cedure is finite ...... Water Resources Research 29, 551561. (1993

2013-04-03T23:59:59.000Z

172

Photovoltaic Supply Chain and Cross-Cutting Technologies Round 1  

Broader source: Energy.gov [DOE]

On June 11, 2009, DOE announced the first round of Photovoltaic (PV) Supply Chain and Cross-Cutting Technologies awardees. The funded projects target manufacturing and product cost reduction with...

173

Copositivity cuts for improving SDP bounds on the clique number ...  

E-Print Network [OSTI]

Adding cuts based on copositive matrices, we propose to improve. Lovsz' bound ? .... with AG the adjacency matrix of the complementary graph. Then the MCP ...... MATLAB, in Proceedings of the CACSD Conference, Taipei, Taiwan, 2004.

2008-11-13T23:59:59.000Z

174

Deep cuts in household greenhouse gas emissions Andrew Blakers  

E-Print Network [OSTI]

Deep cuts in household greenhouse gas emissions Andrew Blakers Director, Centre for Sustainable Energy Systems Australian National University Ph 61 2 6125 5905 Andrew.blakers@anu.edu.au Web: http

175

Trends in demand for retail and wholesale cuts of meat  

E-Print Network [OSTI]

TRENDS IN DEMAND FOR RETAIL AND WHOLESALE CUTS OF MEAT A Thesis by DAVID WAYNE HOLLOWAY Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1990 Major Subject: Agricultural Economics TRENDS IN DEMAND FOR RETAIL AND WHOLESALE CUTS OF MEAT A Thesis by DAVID WAYNE HOLLOWAY Approved as to style and content by: Donald E. Farris (Chair of Committee) Carl E. Shafer (Member) Rudo J...

Holloway, David Wayne

1990-01-01T23:59:59.000Z

176

E-Print Network 3.0 - abrasive waterjet cutting Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

5 digital fabrication machines CNC routing, Laser Cutting Waterjet... Cutting, FDM, 3D printing - Materials and methods to compute designs through scripting, parametric... ....

177

CREST Cost of Renewable Energy Spreadsheet Tool: A Model for Developing Cost-Based Incentives in the United States; User Manual Version 4, August 2009 - March 2011 (Updated July 2013)  

SciTech Connect (OSTI)

The objective of this document is to help model users understand how to use the CREST model to support renewable energy incentives, FITs, and other renewable energy rate-setting processes. This user manual will walk the reader through the spreadsheet tool, including its layout and conventions, offering context on how and why it was created. This user manual will also provide instructions on how to populate the model with inputs that are appropriate for a specific jurisdiction's policymaking objectives and context. Finally, the user manual will describe the results and outline how these results may inform decisions about long-term renewable energy support programs.

Gifford, J. S.; Grace, R. C.

2013-07-01T23:59:59.000Z

178

Diamond tool wear vs cutting distance on electroless nickel mirrors  

SciTech Connect (OSTI)

Wear data are presented for diamond tools cutting electroless nickel (eNi) for cut lengths up to 70,000 ft (13 miles). Two tools having different infrared absorption characteristics were used to cut an eNi preparation that had yielded minimum values for surface roughness and tool wear rate in a previous study. The data include Talystep measurement of the rms amplitude of the feed-marks versus cumulative cutting distance, representative examples of shape changes for the feed-mark profiles, SEM and optical micrographs of the tool rake and flank face wear zones, and measurements of the cutting edge profile and edge recession distance by a tool-nose replication technique. Feed-mark roughness values were found to increase from 5 to 90 A rms over the duration of the test, with an associated edge recession of about 1000 A and the development of a periodic tool edge grooving indicative of burnishing of the part surface. The ir absorption data successfully predicted the order of the two tools in terms of wear rate and fracture toughness.

Syn, C.K.; Taylor, J.S.; Donaldson, R.R.

1986-10-14T23:59:59.000Z

179

Cutting Residential, Commercial, and Industrial Energy Use: Tools and Incentives that Work  

Broader source: Energy.gov [DOE]

Cutting Residential, Commercial, and Industrial Energy Use: Tools and Incentives that Work Presentation

180

Effects of Cutting Time, Stump Height, and Herbicide Application on Ash (Fraxinus Spp.)  

E-Print Network [OSTI]

or cutting heights. Keywords: Buprestidae, control, coppice, eradication, triclopyr E merald ash borer (EAB

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Designing the sound of a cut-off drum  

E-Print Network [OSTI]

The spectral action in noncommutative geometry naturally implements an ultraviolet cut-off, by counting the eigenvalues of a (generalized) Dirac operator lower than an energy of unification. Inverting the well known question "how to hear the shape of a drum ?", we ask what drum can be designed by hearing the truncated music of the spectral action ? This makes sense because the same Dirac operator also determines the metric, via Connes distance. The latter thus offers an original way to implement the high-momentum cut-off of the spectral action as a short distance cut-off on space. This is a non-technical presentation of the results of http://arxiv.org/abs/1305.2605

Martinetti, Pierre

2015-01-01T23:59:59.000Z

182

High pressure water jet cutting of sugar cane  

E-Print Network [OSTI]

performance was uniform before cutting. A liquid filled bourdon tube gauge was used to deter- mine the prescribed operating pressures. The gauge measured the oil pressure of the intensifier which had a 20 to 1 ratio (Figure 4 ) ~ The gauge pressure...HIGH PRESSURE WATER JET CUTTING OF SUGAR CANE A Thesis by THOMAS DONALD VALCO Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE May 1977 Major Subject...

Valco, Thomas Donald

2012-06-07T23:59:59.000Z

183

Rebates Cut the Price of Big-Time Efficiency Upgrades  

Broader source: Energy.gov [DOE]

One of the smartest ways for homeowners to save money on major appliance upgrades is to hook into an energy efficiency rebate program. The Neighborhood Energy Connection (NEC), a non-profit organization in St. Paul, Minnesota, helps local residents take advantage of Xcel Energys rebate programs that cut the cost of whole-house energy efficiency upgrades.

184

Brush Busters: How to Avoid Lumps When Treating Cut Stumps  

E-Print Network [OSTI]

the spray mix, fill the tank to the final vol- ume. L-5421 10/05 How to Avoid Lumps When Treating Cut Stumps Two safe, effective, three-step ways to control many woody plants Individual Plant Treatment Series Allan McGinty, Professor and Extenson Range...

McGinty, Allan; Ueckert, Darrell

2005-10-31T23:59:59.000Z

185

Design and Manufacturing for Cleanability in High Performance Cutting  

E-Print Network [OSTI]

on the effect of cutting parameters on chip size and morphology when machining cast aluminium silicon alloy and lubricant channels of the workpieces, they become extremely challenging to remove. Various cleaning methods in the valve of an engine's oil channel during use, causing premature engine failure. The understanding needed

McMains, Sara

186

Method and apparatus for jet-assisted drilling or cutting  

DOE Patents [OSTI]

An abrasive cutting or drilling system, apparatus and method, which includes an upstream supercritical fluid and/or liquid carrier fluid, abrasive particles, a nozzle and a gaseous or low-density supercritical fluid exhaust abrasive stream. The nozzle includes a throat section and, optionally, a converging inlet section, a divergent discharge section, and a feed section.

Summers, David Archibold; Woelk, Klaus Hubert; Oglesby, Kenneth Doyle; Galecki, Grzegorz

2012-09-04T23:59:59.000Z

187

Method and apparatus for jet-assisted drilling or cutting  

DOE Patents [OSTI]

An abrasive cutting or drilling system, apparatus and method, which includes an upstream supercritical fluid and/or liquid carrier fluid, abrasive particles, a nozzle and a gaseous or low-density supercritical fluid exhaust abrasive stream. The nozzle includes a throat section and, optionally, a converging inlet section, a divergent discharge section, and a feed section.

Summers, David Archibold; Woelk, Klaus Hubert; Oglesby, Kenneth Doyle; Galecki, Grzegorz

2013-07-02T23:59:59.000Z

188

Cutting tool study: 21-6-9 stainless steel  

SciTech Connect (OSTI)

The Rocky Flats Plant conducted a study to test cermet cutting tools by performing machinability studies on War Reserve product under controlled conditions. The purpose of these studies was to determine the most satisfactory tools that optimize tool life, minimize costs, improve reliability and chip control, and increase productivity by performing the operations to specified Accuracies. This study tested three manufacturers' cermet cutting tools and a carbide tool used previously by the Rocky Flats Plant for machining spherical-shaped 21-6-9 stainless steel forgings (Figure 1). The 80-degree diamond inserts were tested by experimenting with various chip-breaker geometries, cutting speeds, feedrates, and cermet grades on the outside contour roughing operation. The cermets tested were manufactured by Kennametal, Valenite, and NTK. The carbide tool ordinarily used for this operation is manufactured by Carboloy. Evaluation of tho tools was conducted by investigating the number of passes per part and parts per insert, tool wear, cutting time, tool life, surface finish, and stem taper. Benefits to be gained from this study were: improved part quality, better chip control, increased tool life and utilization, and greater fabrication productivity. This was to be accomplished by performing the operation to specified accuracies within the scope of the tools tested.

McManigle, A.P.

1992-07-29T23:59:59.000Z

189

Cutting tool study: 21-6-9 stainless steel  

SciTech Connect (OSTI)

The Rocky Flats Plant conducted a study to test cermet cutting tools by performing machinability studies on War Reserve product under controlled conditions. The purpose of these studies was to determine the most satisfactory tools that optimize tool life, minimize costs, improve reliability and chip control, and increase productivity by performing the operations to specified Accuracies. This study tested three manufacturers` cermet cutting tools and a carbide tool used previously by the Rocky Flats Plant for machining spherical-shaped 21-6-9 stainless steel forgings (Figure 1). The 80-degree diamond inserts were tested by experimenting with various chip-breaker geometries, cutting speeds, feedrates, and cermet grades on the outside contour roughing operation. The cermets tested were manufactured by Kennametal, Valenite, and NTK. The carbide tool ordinarily used for this operation is manufactured by Carboloy. Evaluation of tho tools was conducted by investigating the number of passes per part and parts per insert, tool wear, cutting time, tool life, surface finish, and stem taper. Benefits to be gained from this study were: improved part quality, better chip control, increased tool life and utilization, and greater fabrication productivity. This was to be accomplished by performing the operation to specified accuracies within the scope of the tools tested.

McManigle, A.P.

1992-07-29T23:59:59.000Z

190

Electrosurgical device for both mechanical cutting and coagulation of bleeding  

DOE Patents [OSTI]

Bipolar electrical coagulation of tissue using radio-frequency energy is combined with the functions of conventional surgical pressure tissue cutting instruments without significant modification thereof in a single instrument with the result that a surgeon can perform both procedures without having to redirect his attention from the area of the surgery.

Doss, James D. (Los Alamos, NM); McCabe, Charles W. (Los Alamos, NM)

1987-01-01T23:59:59.000Z

191

Adaptation of two lucerne populations to different cutting regimes (*)  

E-Print Network [OSTI]

Adaptation of two lucerne populations to different cutting regimes (*) Fabio VERONESI, Anna MARIANI Piante foraggere del Consiglio nazionale delle Ricerche, Perugia, Italia SUMMARY Lucerne, Medicago sativa of proteic concentrates. For this purpose the behaviour of two lucerne populations was studied under

Boyer, Edmond

192

Type-Inference Based Short Cut Deforestation (nearly) without Inlining  

E-Print Network [OSTI]

Type-Inference Based Short Cut Deforestation (nearly) without Inlining -- Work in Progress -- Olaf@informatik.rwth-aachen.de Abstract Deforestation optimises a functional program by transforming it into another one that does not create certain intermediate data structures. In [Chi99] we presented a type-inference based deforestation

Kent, University of

193

Type-Inference Based Short Cut Deforestation (nearly) without Inlining  

E-Print Network [OSTI]

Type-Inference Based Short Cut Deforestation (nearly) without Inlining Olaf Chitil Lehrstuhl f¨ur Informatik II, RWTH Aachen, Germany chitil@informatik.rwth-aachen.de Abstract. Deforestation optimises structures. Our type-inference based deforestation algorithm performs extensive inlining, but only limited

Kent, University of

194

A Surface Reconstruction Method Using Global Graph Cut Optimization  

E-Print Network [OSTI]

SAR (China) 1 sparis@csail.mit.edu -- Sylvain Paris has worked on this project during his PhD at ARTIS calibrated images mainly has been approached using local methods, either as a continuous optimization problem of a pixel. Index Terms Graph flow, graph cut, 3D reconstruction from calibrated cameras, discontinuities

Paris, Sylvain

195

A Surface Reconstruction Method Using Global Graph Cut Optimization  

E-Print Network [OSTI]

SAR (China) 1sparis@csail.mit.edu ­ Sylvain Paris has worked on this project during his PhD at ARTIS calibrated images mainly has been approached using local methods, either as a continuous optimization problem of a pixel. Index Terms Graph flow, graph cut, 3D reconstruction from calibrated cameras, discontinuities

Paris, Sylvain

196

A Surface Reconstruction Method Using Global Graph Cut Optimization  

E-Print Network [OSTI]

SAR (China) 1sparis@csail.mit.edu ­ Sylvain Paris has worked on this project during his PhD at ARTIS reconstruction from multiple calibrated images mainly has been approached using local methods, either to 1/10th of a pixel. Index Terms Graph flow, graph cut, 3D reconstruction from calibrated cameras

Paris-Sud XI, Université de

197

TWIN BUILDING LATTICES DO NOT HAVE ASYMPTOTIC CUT-POINTS  

E-Print Network [OSTI]

TWIN BUILDING LATTICES DO NOT HAVE ASYMPTOTIC CUT-POINTS PIERRE-EMMANUEL CAPRACE*, FRAN?OIS DAHMANI**, AND VINCENT GUIRARDEL** Abstract. We show that twin building lattices have linear divergence, which implies of asymptotic cones of twin building lattices. Theorem 1. The asymptotic cones of a twin building lattice do

Caprace, Pierre-Emmanuel

198

Original article Influence of cutting methods and dates  

E-Print Network [OSTI]

ilex L) coppice M Ducrey M Turrel INRA, Station de Sylviculture Méditerranéenne, Avenue A Vivaldi, F the stools initial- ly had large and numerous shoots. Quercus ilex L / coppice / stump sprout / cuttingL/ taillis / rejets de souche / méthode de coupe / date d'exploitation #12;INTRODUCTION Coppice regeneration

Paris-Sud XI, Université de

199

Recovery FAQ - Hanford Site  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Recovery Act of 2009 > Hanford ARRA FAQ Recovery Act of 2009 Hanford ARRA FAQ Hanford ARRA Weekly Reports Hanford ARRA News Hanford ARRA Photogallery Hanford ARRA Videos Hanford...

200

Dry Versus Wet Aging of Beef: Retail Cutting Yields and Palatability Evaluations of Steaks Using Alternative Cutting Styles  

E-Print Network [OSTI]

Boneless ribeye rolls (n = 12) and boneless top sirloin butts (n = 12) were obtained from heavy weight carcasses (mean = 407.8 kg), assigned to one of two aging treatments (dry or wet) and aged for 35 days at a commercial aging facility. Cutting...

Smith, Amanda 1987-

2012-12-05T23:59:59.000Z

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Laser cutting apparatus for nuclear core fuel subassembly  

DOE Patents [OSTI]

The object of the invention is to provide a system and apparatus which employs laser cutting to disassemble a nuclear core fuel subassembly. The apparatus includes a gantry frame (C) which straddles the core fuel subassembly (14), an x-carriage (22) travelling longitudinally above the frame which carries a focus head assembly (D) having a vertically moving carriage (46) and a laterally moving carriage (52), a system of laser beam transferring and focusing mirrors carried by the x-carriage and focusing head assembly, and a shroud follower (F) and longitudinal follower (G) for following the shape of shroud (14) to maintain a beam focal point (44) fixed upon the shroud surface for accurate cutting.

Walch, Allan P. (Manchester, CT); Caruolo, Antonio B. (Vernon, CT)

1982-02-23T23:59:59.000Z

202

Preliminary cutting and drilling studies using new generation lasers  

SciTech Connect (OSTI)

High power and radiance dye lasers developed at Lawrence Livermore National Laboratory show promise for material processing tanks. Evaluation using welding heat flow models suggest significant increases in precision and speed are expected. We developed tooling and instrumentation to diagnose important parameters including spot geometry and optical train quality. We started processing studies to determine the viability of these lasers of cutting and drilling. We used titanium alloys first in the studies due to the availability of comparable parametric studies in the technical literature. Results show that cuts and holes with extremely fine features can be made with dye lasers. The high radiance beam produces low distortion and small heat-affected zones. We have accomplished very high aspect ratios and micron scale kerfs and holes. Through continued system improvement and process optimization, we believe that submicron levels will be achieved.

Kautz, D.D.; Sze, J.S.; Dragon, E.P.; Hargrove, R.S.

1992-02-20T23:59:59.000Z

203

Higher dimensions Max flow min cut in higher dimensions  

E-Print Network [OSTI]

-negative number, and direction) to each edge such that: net flow at each vertex, except S and T, is zero; and |xe, and direction) to each edge such that: net flow at each vertex is zero; and |xe| e. Value of flow is x0. Duval: net flow at each vertex is zero; and |xe| e. Value of flow is x0. Definition Cut is minimal set

Duval, Art

204

Building Partnerships to Cut Petroleum Use in Transportation (Brochure)  

SciTech Connect (OSTI)

The U.S. Department of Energy's Clean Cities initiative advances the nation's economic, environmental, and energy security by supporting local actions to cut petroleum use in transportation. Clean Cities accomplishes this work through the activities of nearly 100 local coalitions. These coalitions provide resources and technical assistance in the deployment of alternative and renewable fuels, idle-reduction measures, fuel economy improvements, and new transportation technologies as they emerge.

Not Available

2014-02-01T23:59:59.000Z

205

Designing a low cost XY stage for abrasive water jet cutting  

E-Print Network [OSTI]

This thesis guides the reader through the design of an inexpensive XY stage for abrasive water jet cutting machine starting with a set of functional requirements and ending with a product. Abrasive water jet cutting allows ...

Abu Ibrahim, Fadi, 1980-

2004-01-01T23:59:59.000Z

206

U.S. Department of Energy and Masdar Collaborate In Testing Cutting...  

Office of Environmental Management (EM)

Collaborate In Testing Cutting-Edge Solar PV Coating Technologies U.S. Department of Energy and Masdar Collaborate In Testing Cutting-Edge Solar PV Coating Technologies February...

207

E-Print Network 3.0 - acromyrmex leaf-cutting ants Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Miconia argentea seeds by the leaf-cutting ant Atta colombica. Journal of Tropical Eco- logy 14... roots in nests of the leaf-cutting ants Atta cephalotes and Atta...

208

PREDICTION OF CUTTINGS BED HEIGHT WITH COMPUTATIONAL FLUID DYNAMICS IN DRILLING HORIZONTAL AND HIGHLY DEVIATED WELLS  

E-Print Network [OSTI]

PREDICTION OF CUTTINGS BED HEIGHT WITH COMPUTATIONAL FLUID DYNAMICS IN DRILLING HORIZONTAL parameters such as wellbore geometry, pump rate, drilling fluid rheology and density, and maximum drilling Computational Fluid Dynamics methods. Movement, concentration and accumulation of drilled cuttings in non

Ullmer, Brygg

209

Effects of substrate, phenological cutting stage, and auxin concentration on rooting of Cotinus obovatus Raf.  

E-Print Network [OSTI]

A study was conducted to determine the effects of substrate, phenological stage of cuttings and auxin concentrations on the rooting of Texas smoke tree (Cotinus obovatus Raf). Softwood, semi-hardwood and hardwood cuttings were treated with either a...

Denny, Geoffrey Carlile

2013-02-22T23:59:59.000Z

210

SPICE: Scalable P2P implicit group messaging Daniel Cutting a,*, Aaron Quigley b  

E-Print Network [OSTI]

SPICE: Scalable P2P implicit group messaging Daniel Cutting a,*, Aaron Quigley b , Bjo¨rn Landfeldt problem of such systems. This paper broadens our earlier work [D. Cutting, B. Landfeldt, A. Quigley

Landfeldt, Bjorn

211

Evaluation of an air drilling cuttings containment system  

SciTech Connect (OSTI)

Drilling at hazardous waste sites for environmental remediation or monitoring requires containment of all drilling fluids and cuttings to protect personnel and the environment. At many sites, air drilling techniques have advantages over other drilling methods, requiring effective filtering and containment of the return air/cuttings stream. A study of. current containment methods indicated improvements could be made in the filtering of radionuclides and volatile organic compounds, and in equipment like alarms, instrumentation or pressure safety features. Sandia National Laboratories, Dept. 61 11 Environmental Drilling Projects Group, initiated this work to address these concerns. A look at the industry showed that asbestos abatement equipment could be adapted for containment and filtration of air drilling returns. An industry manufacturer was selected to build a prototype machine. The machine was leased and put through a six-month testing and evaluation period at Sandia National Laboratories. Various materials were vacuumed and filtered with the machine during this time. In addition, it was used in an actual air drive drilling operation. Results of these tests indicate that the vacuum/filter unit will meet or exceed our drilling requirements. This vacuum/filter unit could be employed at a hazardous waste site or any site where drilling operations require cuttings and air containment.

Westmoreland, J.

1994-04-01T23:59:59.000Z

212

Solving mixed 0-1 knapsack problems using Fenchel cutting planes  

E-Print Network [OSTI]

Cutting-plane methods have shown their unique advantage in solving IP problems. In this research, a new algorithm (MIXCUT) is developed to generate the cutting planes for mixed 0-1 knapsack problems. The class of the cutting planes is called Fenchel...

Yan, Xiao-Qing

1995-01-01T23:59:59.000Z

213

An Experimental and Numerical Investigation of the Cutting Forces in Dry Milling Machining Process  

E-Print Network [OSTI]

are in good agreement with the metal cutting mechanics where effects of the tool run out and vibrations are observed. A parametric study has been conducted and the results show that the magnitude of the cutting forces at a constant depth of cut increases...

Wadja, Bright Yves wilfried

2014-04-29T23:59:59.000Z

214

Improved Swing-Cut Modeling for Planning and Scheduling of Oil-Refinery Distillation Units  

E-Print Network [OSTI]

, Pennsylvania 15213, United States. Crude-oil assays, Distillation, Fractionation, Swing-cuts, Temperature cut with in the nonlinear optimization. 1. INTRODUCTION Distillation or fractionation models for planning and scheduling1 Improved Swing-Cut Modeling for Planning and Scheduling of Oil-Refinery Distillation Units Brenno

Grossmann, Ignacio E.

215

MODELLING OF SUPERSONIC GAS FLOW OF NOZZLES FOR LASER CUTTING SYSTEMS  

E-Print Network [OSTI]

MODELLING OF SUPERSONIC GAS FLOW OF NOZZLES FOR LASER CUTTING SYSTEMS I. Dohnke1 , D. Peter1 , J. The supersonic gas flow of nozzles for laser cutting systems has been modelled with CFD simulations% and maintaining the cutting quality compared to our standard product. Keywords: modelling of gas flow behaviour

216

Innovative approach for restoring coastal wetlands using treated drill cuttings  

SciTech Connect (OSTI)

The leading environmental problem facing coastal Louisiana regions is the loss of wetlands. Oil and gas exploration and production activities have contributed to wetland damage through erosion at numerous sites where canals have been cut through the marsh to access drilling sites. An independent oil and gas producer, working with Southeastern Louisiana University and two oil field service companies, developed a process to stabilize drill cuttings so that they could be used as a substrate to grow wetlands vegetation. The U.S. Department of Energy (DOE) funded a project under which the process would be validated through laboratory studies and field demonstrations. The laboratory studies demonstrated that treated drill cuttings support the growth of wetlands vegetation. However, neither the Army Corps of Engineers (COE) nor the U.S. Environmental Protection Agency (EPA) would grant regulatory approval for afield trial of the process. Argonne National Laboratory was asked to join the project team to try to find alternative mechanisms for gaining regulatory approval. Argonne worked with EPA's Office of Reinvention and learned that EPA's Project XL would be the only regulatory program under which the proposed field trial could be done. One of the main criteria for an acceptable Project XL proposal is to have a formal project sponsor assume the responsibility and liability for the project. Because the proposed project involved access to private land areas, the team felt that an oil and gas company with coastal Louisiana land holdings would need to serve as sponsor. Despite extensive communication with oil and gas companies and industry associations, the project team was unable to find any organization willing to serve as sponsor. In September 1999, the Project XL proposal was withdrawn and the project was canceled.

Veil, J. A.; Hocking, E. K.

1999-11-02T23:59:59.000Z

217

Growing Cutting-edge X-ray Optics  

SciTech Connect (OSTI)

Ever imagined that an Xbox controller could help open a window into a world spanning just one billionth of a meter? Brookhaven Lab's Ray Conley grows cutting-edge optics called multilayer Laue lenses (MLL) one atomic layer at a time to focus high-energy x-rays to within a single nanometer. To achieve this focusing feat, Ray uses a massive, custom-built atomic deposition device, an array of computers, and a trusty Xbox controller. These lenses will be deployed at the Lab's National Synchrotron Light Source II, due to begin shining super-bright light on pressing scientific puzzles in 2015

Ray Conley

2012-11-30T23:59:59.000Z

218

An automatic cutting height control system for a sugarcane harvester  

E-Print Network [OSTI]

). . . . . 53 22. 23. Effect of the soil-stalk weight factor on the ground average, and the stalk average A comparison of Avg and Avs calculated from laboratory data with both real numbers, and integer numbers. . . . . . . 57 24 . A graph of a portion... factor, W. By calculating the difference between Avg and Avs, as equation (5) shows, the height of the sugarcane stubble remaining after cutting, 0, was to be determined. D = Avg - Avs (5) where: D - the height of the sugarcane stubble remaining...

Hale, Scott Andrew

1985-01-01T23:59:59.000Z

219

Growing Cutting-edge X-ray Optics  

ScienceCinema (OSTI)

Ever imagined that an Xbox controller could help open a window into a world spanning just one billionth of a meter? Brookhaven Lab's Ray Conley grows cutting-edge optics called multilayer Laue lenses (MLL) one atomic layer at a time to focus high-energy x-rays to within a single nanometer. To achieve this focusing feat, Ray uses a massive, custom-built atomic deposition device, an array of computers, and a trusty Xbox controller. These lenses will be deployed at the Lab's National Synchrotron Light Source II, due to begin shining super-bright light on pressing scientific puzzles in 2015

Ray Conley

2013-07-17T23:59:59.000Z

220

Cut and Shoot, Texas: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:EnergyWisconsin:2003)Crowley County,Curran,784067°, -103.4511768°EnergyCut and

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Cuttings Analysis At Raft River Geothermal Area (1976) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable Solutions LLC JumpCrow Lake Wind JumpCuttings Analysis At New River Area

222

Microsoft Word - 2007 Cross Cut - APS response.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping RichlandScatteringWater308:UFC 2300.00 Department ofMay Cross Cut

223

(A)dS Holography with a Cut-off  

E-Print Network [OSTI]

We find out the smearing/ transfer functions that relate a local bulk operator with its boundary values at a cut-off surface located at $z=z_0$ of the AdS Poincar\\'{e} patch. We compare these results with de Sitter counterparts and comment on their connections with corresponding construction for dS/ CFT. As the boundary values can help define the required field theory at $z=z_0$ and encode bulk locality in terms of it, our work can provide key information about holographic RG in the context of AdS/ CFT.

Debajyoti Sarkar

2014-10-09T23:59:59.000Z

224

The ARRA EAP Energy Assurance Planning Bulletin  

Broader source: Energy.gov (indexed) [DOE]

Efficiency Standards Energy Assurance Success Stories Heber Light & Power Takes Lead on Local EA Planning Upcoming Events NASEONARUC Environmental Protection & Clean, Reliable...

225

Financing Program Support for ARRA Recipients  

Broader source: Energy.gov (indexed) [DOE]

capital Typically results in reduced borrowing costs o Helps creates jobs o Reduces energy consumption and provides environmental benefits o o Can leverage existing...

226

ARRA521 Recovery Act - Project Daily Report  

Office of Environmental Management (EM)

Spend Plan Obligated to Contracts Payments to Date Unpaid Balance Argonne National Laboratory 79,000,000 79,000,000 79,000,000 0 Brookhaven National Laboratory 70,810,000...

227

Microsoft Word - ARRA_07-04-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Follow up actions include: Contact the operator of the piece of equipment via radio, cell phone, or hand signals to confirm contact and status of employee. If necessary,...

228

AVTA: ARRA EV Project Overview Reports  

Broader source: Energy.gov [DOE]

The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following reports provide summary overviews of the EV Project, which partnered with city, regional and state governments, utilities, and other organizations in 16 cities to deploy about 14,000 Level 2 PEV chargers and 300 DC fast chargers. It also deployed 5,700 all-electric Nissan Leafs and 2,600 plug-in hybrid electric Chevrolet Volts.

229

AVTA: ARRA EV Project Vehicle Placement Maps  

Broader source: Energy.gov [DOE]

The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following maps describe where the EV Project deployed 5,700 all-electric Nissan Leafs and 2,600 plug-in hybrid electric Chevrolet Volts.

230

The ARRA EAP Energy Assurance Planning Bulletin  

Broader source: Energy.gov (indexed) [DOE]

of State EA Plans Exercise and Reporting Deadlines Energy Assurance Success Stories West Virginia News from the States California is Top Renewable State Upcoming Events NMU...

231

Microsoft Word - ARRA_09-26-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

232

Microsoft Word - ARRA_09-19-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

233

Microsoft Word - ARRA_08-15-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

234

Microsoft Word - ARRA_08-22-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

235

Microsoft Word - ARRA_07-11-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

236

Microsoft Word - ARRA_06-06-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

237

Microsoft Word - ARRA_07-18-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

238

Microsoft Word - ARRA_09-05-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

239

Microsoft Word - ARRA_01-17-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

material to be shipped to ERDF. A wide range of contaminated soil, miscellaneous debris, buried equipment, and structural materials may be encountered during remedial activities....

240

Microsoft Word - ARRA_08-01-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Microsoft Word - ARRA_08-08-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

242

Microsoft Word - ARRA_09-12-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

243

Microsoft Word - ARRA_06-20-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

244

Microsoft Word - ARRA_01-24-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

penetrometer. Cone penetrometers are narrow steel cylinders that were installed around buried, vertical pipes containing radioactive materials. The vertical pipe units, or VPUs,...

245

Microsoft Word - ARRA_06-13-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

246

Microsoft Word - ARRA_07-25-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

247

Microsoft Word - ARRA_08-29-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

248

Microsoft Word - ARRA_01-10-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

material to be shipped to ERDF. A wide range of contaminated soil, miscellaneous debris, buried equipment, and structural materials may be encountered during remedial activities....

249

Microsoft Word - ARRA_06-27-10  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 23 trenches, while the moderate- and high-activity wastes were disposed in 94 vertical pipe units (VPUs). The VPUs were constructed by welding five bottomless drums together and...

250

The ARRA EAP Energy Assurance Planning Bulletin  

Broader source: Energy.gov (indexed) [DOE]

during energy emergencies. DOE will also invite industry, non-profit, and Federal agency participants who are critical to the discussion. Stay tuned for more information...

251

Financing Program Support for ARRA Recipients  

Broader source: Energy.gov (indexed) [DOE]

or no upfront cost. Costs repaid on property y tax bills over p p 20 years. PACE: How it Works City or county creates type of land-secured financing district or similar legal...

252

Energy Storage R&D and ARRA  

Broader source: Energy.gov (indexed) [DOE]

Advanced high-energy anode materials Angstron Materials Hybrid Nano Carbon Fiber Graphene Platelet-Based High-capacity Anodes NC State & ALE Inc High-Energy Nanofiber Anode...

253

Microsoft Word - ARRA Final Report Cover  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F S i DOE Tribal Leader HOWARD8-04 (02/21/08) ii This The

254

Microsoft Word - ARRA Final Report Cover  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F S i DOE Tribal Leader HOWARD8-04 (02/21/08) ii This TheNew Jersey

255

2011 ARRA Newsletters | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustionImprovement Awardflash2007-42attachment1.pdfmodule 4Department02010nuclearfuture_memo.pdf1 -1

256

Microsoft Word - ARRA Final Report Cover_1  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't32 Master EM ManagementWe2.docAL-2006-105.docARPA-E

257

The ARRA EAP Energy Assurance Planning Bulletin  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesignOfficeThe 21st Century TruckAPRIL 1, 2011

258

The ARRA EAP Energy Assurance Planning Bulletin  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesignOfficeThe 21st Century TruckAPRIL 1, 20113,

259

The ARRA EAP Energy Assurance Planning Bulletin  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesignOfficeThe 21st Century TruckAPRIL 1,

260

2009 ARRA Newsletters | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energyon ArmedWaste and Materials Disposition#EnergyFaceoff1 1Electricity Supply0720082009

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

2010 ARRA Newsletters | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energyon ArmedWaste and Materials Disposition#EnergyFaceoff1 1Electricity2009 Solar

262

Microsoft Word - WIPP ARRA Final Report Cover  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't32 MasterAcquisiti ---- Contra See AcquFOR007By United

263

Project_Descriptions_ITP_ARRA_Awards.xls  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d FNEPA/309DepartmentDepartmentPowerMetal OxidesCompletewith

264

Appendix A-1 Contract Performance Reports ARRA  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout theOFFICEAmes LaboratoryAntonyaAppeals Appeals FOIAA4.A7.A8.A9.AAA-1

265

ARRA Proposed Award: Home Performance Program  

E-Print Network [OSTI]

Star appliance replacement; air conditioner and/or furnace replacement or installation defect repair; cool roofs

266

Benchmarking U.S. beef retail cut composition  

E-Print Network [OSTI]

B E NCHM AR K I NG? U. S.?B E E F ? RE T AI L ? CUT ? COM P OSIT I ON ? A ? T h e s i s ? by? C AR R I E ? L YNN ? A D AM S? Submi t t ed? to? t h e?O f f i c e?o f ? Graduat e?S t udi es ? o f ? T ex as ? A& M ? U ni vers i t y? i n ? p art i a l... ? f u lf il lm e n t ? o f ? t h e?r equi r e m e n t s ? f o r ? t h e?degr ee ? o f ? M A ST E R ? OF ? SCIE NC E ? A ugu s t ? 2006? M a j o r ? Subj ec t :? ? A ni m a l ? Sc i e n ce B E NCHM AR K I NG? U. S.?B E E F ? RE T AI L ? CUT ? COM P OSIT...

Adams, Carrie Lynn

2006-10-30T23:59:59.000Z

267

PERMIT FOR WELDING AND CUTTING OPERATIONS INSTRUCTIONS: This permit must be completed for all operations involving open  

E-Print Network [OSTI]

PERMIT FOR WELDING AND CUTTING OPERATIONS INSTRUCTIONS: This permit must be completed for all/Area: Description of Work to be Performed: (check where appropriate) Welding Cutting Soldering Burning Type OF ACCIDENTAL FIRES DUE TO WELDING OR CUTTING OPERATIONS 1: Do not perform cutting or welding work where an open

Papautsky, Ian

268

Degradation of dome cutting minerals in Hanford waste  

SciTech Connect (OSTI)

At the Hanford Tank Farms, recent changes in retrieval technology require cutting new risers in several single-shell tanks. The Hanford Tank Farm Operator is using water jet technology with abrasive silicate minerals such as garnet or olivine to cut through the concrete and rebar dome. The abrasiveness of these minerals, which become part of the high-level waste stream, may enhance the erosion of waste processing equipment. However, garnet and olivine are not thermodynamically stable in Hanford waste, slowly degrading over time. How likely these materials are to dissolve completely in the waste before the waste is processed in the Waste Treatment and Immobilization Plant can be evaluated using theoretical analysis for olivine and collected direct experimental evidence for garnet. Based on an extensive literature study, a large number of primary silicates decompose into sodalite and cancrinite when exposed to Hanford waste. Given sufficient time, the sodalite also degrades into cancrinite. Even though cancrinite has not been directly added to any Hanford tanks during process times, it is the most common silicate observed in current Hanford waste. By analogy, olivine and garnet are expected to ultimately also decompose into cancrinite. Garnet used in a concrete cutting demonstration was immersed in a simulated supernate representing the estimated composition of the liquid retrieving waste from Hanford tank 241-C-107 at both ambient and elevated temperatures. This simulant was amended with extra NaOH to determine if adding caustic would help enhance the degradation rate of garnet. The results showed that the garnet degradation rate was highest at the highest NaOH concentration and temperature. At the end of 12 weeks, however, the garnet grains were mostly intact, even when immersed in 2 molar NaOH at 80 deg C. Cancrinite was identified as the degradation product on the surface of the garnet grains. In the case of olivine, the rate of degradation in the high-pH regimes of a waste tank is expected to depend on two main parameters: carbonate is expected to slow olivine degradation rates, whereas hydroxide is expected to enhance olivine dissolution rates. Which of these two competing dissolution drivers will have a larger impact on the dissolution rate in the specific environment of a waste tank is currently not identifiable. In general, cancrinite is much smaller and less hard than either olivine or garnet, so would be expected to be less erosive to processing equipment. Complete degradation of either garnet or olivine prior to being processed at the Waste Treatment and Immobilization Plant cannot be confirmed, however.

Reynolds, Jacob G.; Huber, Heinz J.; Cooke, Gary A.

2013-01-11T23:59:59.000Z

269

Degradation of Dome Cutting Minerals in Hanford Waste - 13100  

SciTech Connect (OSTI)

At the Hanford Tank Farms, recent changes in retrieval technology require cutting new risers in several single-shell tanks. The Hanford Tank Farm Operator is using water jet technology with abrasive silicate minerals such as garnet or olivine to cut through the concrete and rebar dome. The abrasiveness of these minerals, which become part of the high-level waste stream, may enhance the erosion of waste processing equipment. However, garnet and olivine are not thermodynamically stable in Hanford waste, slowly degrading over time. How likely these materials are to dissolve completely in the waste before the waste is processed in the Waste Treatment and Immobilization Plant can be evaluated using theoretical analysis for olivine and collected direct experimental evidence for garnet. Based on an extensive literature study, a large number of primary silicates decompose into sodalite and cancrinite when exposed to Hanford waste. Given sufficient time, the sodalite also degrades into cancrinite. Even though cancrinite has not been directly added to any Hanford tanks during process times, it is the most common silicate observed in current Hanford waste. By analogy, olivine and garnet are expected to ultimately also decompose into cancrinite. Garnet used in a concrete cutting demonstration was immersed in a simulated supernate representing the estimated composition of the liquid retrieving waste from Hanford tank 241-C-107 at both ambient and elevated temperatures. This simulant was amended with extra NaOH to determine if adding caustic would help enhance the degradation rate of garnet. The results showed that the garnet degradation rate was highest at the highest NaOH concentration and temperature. At the end of 12 weeks, however, the garnet grains were mostly intact, even when immersed in 2 molar NaOH at 80 deg. C. Cancrinite was identified as the degradation product on the surface of the garnet grains. In the case of olivine, the rate of degradation in the high-pH regimes of a waste tank is expected to depend on two main parameters: carbonate is expected to slow olivine degradation rates, whereas hydroxide is expected to enhance olivine dissolution rates. Which of these two competing dissolution drivers will have a larger impact on the dissolution rate in the specific environment of a waste tank is currently not identifiable. In general, cancrinite is much smaller and less hard than either olivine or garnet, so would be expected to be less erosive to processing equipment. Complete degradation of either garnet or olivine prior to being processed at the Waste Treatment and Immobilization Plant cannot be confirmed, however. (authors)

Reynolds, Jacob G.; Cooke, Gary A.; Huber, Heinz J. [Washington River Protection Solutions, LLC, P.O. Box 850, Richland, WA 99352 (United States)] [Washington River Protection Solutions, LLC, P.O. Box 850, Richland, WA 99352 (United States)

2013-07-01T23:59:59.000Z

270

Experience in producing dewaxed cut for VMGZ oil base stock  

SciTech Connect (OSTI)

In the production of base stock VMGZ oil, a given viscosity, solid point, and initial boiling point, are required. The Moscow Petroleum Company mixed West Siberian and Ramaschinko crudes in this process to obtain proper specifications. But when they used paraffinic Usa crude off-specification batches were obtained. It became necessary to investigate the nature of the crude oil on the quality of the base stock. Usa crude, the study found, has a higher solid point, lower viscosity. Heavier cuts (with boiling points in the 280-5 C range) must be used. A mixture of 50% West Siberian and Romanian and 50% USA crude was also tested. This mixture meets requirements if the boiling point is no lower than 280 C. The results indicate that the distillation range of the deepstock is selected according to the nature of the crude, a finding which makes it possible to avoid off-specification.

Drozdova, M.A.; Edigarova, V.S.; Gul'din, G.L.

1983-05-01T23:59:59.000Z

271

The influence of Pisolithus tinctorius (Pers.) coker and couch on the propagation of slash pine cuttings  

E-Print Network [OSTI]

in the dormant stage of development, and in general, they were hard and lignified. Upon removal from the ortets, cuttings were stored upright in plastic bags in an ice-filled ice chest. Approximately 6 hours after the last cutting was removed, the first...THE INFLUENCE OF PISOLITHUS TINCTORIUS (PERS. ) COKER AND COUCH ON THE PROPAGATION OF SLASH PINE CUTTINGS A Thesis by ALAN BRADLEY HUNTER Submitted to the Graduate College of Texas MM University in Partial fulfillment of the requirement...

Hunter, Alan Bradley

2012-06-07T23:59:59.000Z

272

PV Supply Chain and Cross-Cutting Technologies: Upcoming Funding Opportunity  

SciTech Connect (OSTI)

Summarizes the Solar Program's upcoming funding opportunity, called PV Supply Chain and Cross-Cutting Technologies, which is expected to be open by the end of October 2008.

Not Available

2008-10-01T23:59:59.000Z

273

TCAT to Receive Ithaca's First 'Cutting-Edge' Fuel Cell Bus ...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Archived News Stories Latest News TCAT to Receive Ithaca's First 'Cutting-Edge' Fuel Cell Bus 2 Cornellians receive Distinguished Scholar Award Versatile polymer film...

274

Optimization Online - A branch-cut-and-price algorithm for the ...  

E-Print Network [OSTI]

Aug 11, 2014 ... A branch-cut-and-price algorithm for the energy minimization vehicle routing problem. Ricardo Fukasawa (rfukasaw ***at*** math.uwaterloo.ca)

Ricardo Fukasawa

2014-08-11T23:59:59.000Z

275

WM00 Conference, February 27 March 2, 2000 DEMONSTRATING DIAMOND WIRE CUTTING OF THE TFTR  

E-Print Network [OSTI]

bundles in heat exchangers. Some expected benefits of this technology include: significantly reduction requires dedicated engineering and specialized fabrication remote/semi­remote cutting operations

276

E-Print Network 3.0 - at-cut quartz resonators Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sciences 2 Structural disorder and loss of piezoelectric properties in -quartz at high temperature Summary: ( ) and piezoelectric coupling constant k( ) of AT-cut -quartz...

277

Can We Observe Galaxies that Recede Faster than Light ? -- A More Clear-Cut Answer  

E-Print Network [OSTI]

A more clear-cut answer to the title question is, ``Yes'' if the universal expansion started with a big bang; ``No'' if it started infinitely slowly.

T. Kiang

2003-05-27T23:59:59.000Z

278

A probabilistic comparison of split and type 1 triangle cuts for two ...  

E-Print Network [OSTI]

Jun 1, 2010 ... Georgia Institute of Technology, Atlanta, GA 30332 ... by adding in a single round all possible cuts from the family) corresponding to the three...

2010-06-01T23:59:59.000Z

279

Classical and quantum chaos in a circular billiard with a straight cut  

E-Print Network [OSTI]

We study classical and quantum dynamics of a particle in a circular billiard with a straight cut. This system can be integrable, nonintegrable with soft chaos, or nonintegrable with hard chaos, as we vary the size of the cut. We use a quantum web to show differences in the quantum manifestations of classical chaos for these three different regimes.

Suhan Ree; L. E. Reichl

1998-07-09T23:59:59.000Z

280

Leaf endophyte load influences fungal garden development in leaf-cutting ants  

E-Print Network [OSTI]

Leaf endophyte load influences fungal garden development in leaf-cutting ants Van Bael et al. Van Open Access Leaf endophyte load influences fungal garden development in leaf-cutting ants Sunshine with relatively low fungal endophyte content. This preference suggests that fungal endophytes exact a cost

Bermingham, Eldredge

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

NEAR Shoemaker Spacecraft Model InstructionsNEAR Shoemaker Spacecraft Model Instructions Cut out Dish.  

E-Print Network [OSTI]

the Solar Panel center. · Tape or glue one set of 4 (folded out) tabs of ring to bottom of Dish, centering ring on the bottom side of Dish. The other set will go into the Solar Panel center. C: SOLAR PANEL PART · Cut out Solar Panel Part including the 4 rectangles at base of panels. · Cut the 4 white slits

282

Europe, Cutting Biofuel Subsidies, Redirects Aid to Stress Greenest Options -New York Times January 22, 2008  

E-Print Network [OSTI]

Europe, Cutting Biofuel Subsidies, Redirects Aid to Stress Greenest Options - New York Times January 22, 2008 Europe, Cutting Biofuel Subsidies, Redirects Aid to Stress Greenest Options By ELISABETH for biofuels, acknowledging that the environmental benefits of these fuels have often been overstated

283

On the editing of images: selecting, cutting and filling-in  

E-Print Network [OSTI]

On the editing of images: selecting, cutting and filling-in Frederic Labrosse Computer Science: selecting, cutting and filling-in Frederic Labrosse Computer Science Department, University of Wales of this work is post-production special effects in cinema or image manipulation where one often wants to remove

Labrosse, Frdric

284

Does the Budget Surplus Justify Large-Scale Tax Cuts?: Updates and Extensions  

E-Print Network [OSTI]

Does the Budget Surplus Justify Large-Scale Tax Cuts?: Updates and Extensions Alan J. Auerbach agreed should not be used for tax cuts. All of the remaining "on-budget" surplus was due to implausible of the on-budget surplus was due to accumulations in government trust funds for medicare and pensions, which

Sadoulet, Elisabeth

285

Measurements on 5:1 Scale Abrasive Water Jet Cutting Head Models  

E-Print Network [OSTI]

nozzle orifice s Isentropic (e.g. in w.jet.s) w.jet Water jet water Water Superscripts: * Symbol for non, an achievable accuracy also mentioned by Hashish in [7]. Improving the AWJ cutting process in a way that parts with precise accuracy of motion, a precisely manufactured tool (cutting head) and optimally set machining

286

Published: 3 November 2014 Don't Cut Aid to Egypt: The Hopeful Case for  

E-Print Network [OSTI]

1 Published: 3 November 2014 Don't Cut Aid to Egypt: The Hopeful Case for Supporting Egyptian President Sisi Today, the U.S. needs Egypt's partnership more than ever. Op-Ed by Ahmed H. Zewail Some support him. And I believe that cutting foreign aid to Egypt at this point would harm the U.S.-Egypt

Zewail, Ahmed

287

Ecological effects of small-scale cutting of Philippine mangrove forests  

E-Print Network [OSTI]

in cut forests: Sonneratia sp., A. marina and R. apiculata regenerate well by coppice regrowth the significance of small-scale cutting disturbance and coppice regeneration as biotic factors in mangrove ecology; Non-timber forest products; Canopy gaps; Coppice regeneration; Mangroves; Philippines 1. Introduction

Walters, Bradley B.

288

The Beef Nutrient Database Improvement Project: Retail Cuts From the Rib and Plate  

E-Print Network [OSTI]

was fabricated 14 to 21 d postmortem into the appropriate retail cuts to be used for this study. The cuts were dissected, either raw or cooked (braised, grilled, roasted), into four separable components: separable lean, seam fat, external fat, and refuse. Bone...

May, Laura

2011-02-22T23:59:59.000Z

289

Cut-Based Abduction Marcello D'Agostino Marcelo Finger Dov Gabbay  

E-Print Network [OSTI]

Cut-Based Abduction Marcello D'Agostino Marcelo Finger Dov Gabbay Abstract In this paper we explore a generalization of traditional abduction which can simultaneously perform two differ- ent tasks: (i) given formula can be seen as a cut formula with respect to Gentzen's sequent calculus, so the abduction method

Finger, Marcelo

290

Towards automated first-order abduction: the cut-based approach  

E-Print Network [OSTI]

Towards automated first-order abduction: the cut-based approach MARCELO FINGER, Department-mail: mfinger@ime.usp.br Abstract Traditional abduction imposes as a precondition the restriction, undecidable. To avoid such problem, we present a first-order cut- based abduction method, which has KE

Finger, Marcelo

291

C-105 heel pit removed and C-105 dome cut paves way for new retrieval technology  

SciTech Connect (OSTI)

For just the second time, crews have cut a hole in the top of an active radioactive waste storage tank at Hanford. Workers began cutting a 55-inch hole in the top of Tank C-105 last Tuesday night on graveyard shift, completing the cut early Wednesday. The hole will allow for installation of the Mobile Arm Retrieval System (MARS) Vacuum into the tank. The cut was made through 17 inches of concrete and rebar using the newly developed rotary-core cutting system, which uses a laser-guided steel canister with teeth on the bottom to drill a round hole into the tank dome. The project was completed safely and successfully in a high-rad area without contamination or significant dose to workers.

Mackey, Thomas C.; Sutey, Michael J.

2013-06-10T23:59:59.000Z

292

Diagnostics principle of microwave cut-off probe for measuring absolute electron density  

SciTech Connect (OSTI)

A generalized diagnostics principle of microwave cut-off probe is presented with a full analytical solution. In previous studies on the microwave cut-off measurement of weakly ionized plasmas, the cut-off frequency ?{sub c} of a given electron density is assumed to be equal to the plasma frequency ?{sub p} and is predicted using electromagnetic simulation or electric circuit model analysis. However, for specific plasma conditions such as highly collisional plasma and a very narrow probe tip gap, it has been found that ?{sub c} and ?{sub p} are not equal. To resolve this problem, a generalized diagnostics principle is proposed by analytically solving the microwave cut-off condition Re[?{sub r,eff}(??=??{sub c})]?=?0. In addition, characteristics of the microwave cut-off condition are theoretically tested for correct measurement of the absolute electron density.

Jun, Hyun-Su, E-mail: mtsconst@kaist.ac.kr [Department of Physics, Korea Advanced Institute of Science and Technology, Daejeon 305-701 (Korea, Republic of)

2014-08-15T23:59:59.000Z

293

Cutting-edge issues of core-collapse supernova theory  

SciTech Connect (OSTI)

Based on multi-dimensional neutrino-radiation hydrodynamic simulations, we report several cutting-edge issues about the long-veiled explosion mechanism of core-collapse supernovae (CCSNe). In this contribution, we pay particular attention to whether three-dimensional (3D) hydrodynamics and/or general relativity (GR) would or would not help the onset of explosions. By performing 3D simulations with spectral neutrino transport, we show that it is more difficult to obtain an explosion in 3D than in 2D. In addition, our results from the first generation of full general relativistic 3D simulations including approximate neutrino transport indicate that GR can foster the onset of neutrino-driven explosions. Based on our recent parametric studies using a light-bulb scheme, we discuss impacts of nuclear energy deposition behind the supernova shock and stellar rotation on the neutrino-driven mechanism, both of which have yet to be included in the self-consistent 3D supernova models. Finally we give an outlook with a summary of the most urgent tasks to extract the information about the explosion mechanisms from multi-messenger CCSN observables.

Kotake, Kei [Department of Applied Physics, Faculty of Science, Fukuoka University, 8-19-1 Nanakuma, Jonan-ku, Fukuoka, 814-0180 (Japan); Nakamura, Ko [Faculty of Science and Engineering, Waseda University, Ohkubo 3-4-1, Shinjuku, Tokyo, 169-8555 (Japan); Kuroda, Takami [Department Physik, Universitt Basel, Klingelbergstrasse 82, 4056 Basel (Switzerland); Takiwaki, Tomoya [Division of Theoretical Astronomy, National Astronomical Observatory of Japan, 2-21-1 Osawa, Mitaka, Tokyo, 181-8588 (Japan)

2014-05-02T23:59:59.000Z

294

Self-excited vibrations in turning: cutting moment analysis  

E-Print Network [OSTI]

This work aims at analysing the moment effects at the tool tip point and at the central axis, in the framework of a turning process. A testing device in turning, including a six-component dynamometer, is used to measure the complete torsor of the cutting actions in the case of self-excited vibrations. Many results are obtained regarding the mechanical actions torsor. A confrontation of the moment components at the tool tip and at the central axis is carried out. It clearly appears that analysing moments at the central axis avoids the disturbances induced by the transport of the moment of the mechanical actions resultant at the tool tip point. For instance, the order relation between the components of the forces is single. Furthermore, the order relation between the moments components expressed at the tool tip point is also single and the same one. But at the central axis, two different order relations regarding moments are conceivable. A modification in the rolling moment localization in the (y, z) tool plan is associated to these two order relations. Thus, the moments components at the central axis are particularly sensitive at the disturbances of machining, here the self-excited vibrations.

Olivier Cahuc; Jean-Yves K'Nevez; Alain Grard; Philippe Darnis; Gatan Albert; Claudiu F. Bisu; Cline Grard

2010-07-06T23:59:59.000Z

295

Selecting the proper fuel gas for cost-effective oxyfuel cutting  

SciTech Connect (OSTI)

The motivating factor behind recent research and development efforts in metal cutting has been the growing need for companies everywhere to embrace emerging technologies if they are to complete in the global economy. To quickly implement these productivity improvements and gain lower bottom line costs for welding and cutting operations, rapid commercialization of these process advancements is needed. Although initially more expensive, additive-enhanced fuel gases may be the most cost-effective choice for certain cutting applications. The cost of additive-enhanced fuel gases can be justified where oxygen pricing is low (such as with bulk oxygen). Propylene exhibited equal cutting speeds to acetylene and improved cutting economy under specific conditions, which involved longer cuts on thicker base materials. With a longer cut distance, the extra time required to reach the kindling temperature (when compared to acetylene) becomes less critical. It is important to note that kindling temperature was reached more rapidly with propylene than it was with propane, but both fuel gases were slower than acetylene. When factors such as these are considered, many applications are found to be more cost effectively performed with the more expensive acetylene or propylene fuel gases. Each individual application must be studied on a singular basis to determine the most cost-effective choice when selecting the fuel gas.

Lyttle, K.A.; Stapon, W.F.G. [Praxair, Inc., Danbury, CT (United States); Guimaraes, A.

1997-07-01T23:59:59.000Z

296

Comparative Evaluation of Cutting Methods of Activated Concrete from Nuclear Power Plant Decommissioning - 13548  

SciTech Connect (OSTI)

The amount of radioactive wastes from decommissioning of a nuclear power plant varies greatly depending on factors such as type and size of the plant, operation history, decommissioning options, and waste treatment and volume reduction methods. There are many methods to decrease the amount of decommissioning radioactive wastes including minimization of waste generation, waste reclassification through decontamination and cutting methods to remove the contaminated areas. According to OECD/NEA, it is known that the radioactive waste treatment and disposal cost accounts for about 40 percentage of the total decommissioning cost. In Korea, it is needed to reduce amount of decommissioning radioactive waste due to high disposal cost, about $7,000 (as of 2010) per a 200 liter drum for the low- and intermediate-level radioactive waste (LILW). In this paper, cutting methods to minimize the radioactive waste of activated concrete were investigated and associated decommissioning cost impact was assessed. The cutting methods considered are cylindrical and volume reductive cuttings. The study showed that the volume reductive cutting is more cost-effective than the cylindrical cutting. Therefore, the volume reductive cutting method can be effectively applied to the activated bio-shield concrete. (authors)

Kim, HakSoo; Chung, SungHwan; Maeng, SungJun [Central Research Institute, Korea Hydro and Nuclear Power Co. Ltd., 1312-70 Yuseong-daero, Yuseong-gu, Daejeon 305-343 (Korea, Republic of)] [Central Research Institute, Korea Hydro and Nuclear Power Co. Ltd., 1312-70 Yuseong-daero, Yuseong-gu, Daejeon 305-343 (Korea, Republic of)

2013-07-01T23:59:59.000Z

297

Alginate-Based Edible Coating to Enhance Quality and Shelf-Life of Fresh-Cut Watermelon (Citrullus Lanatus)  

E-Print Network [OSTI]

Fresh-cut watermelon is appreciated for its taste, flavor, and juiciness. However, there are challenges in maintaining the freshness since fresh-cut processing of fruits promotes faster deterioration. Our objective was to determine the effectiveness...

Sipahi, Rabia

2012-10-19T23:59:59.000Z

298

Process For Cutting Polymers Electrolyte Multi-Layer Batteries And Batteries Obtained Thereby  

DOE Patents [OSTI]

A stacking of battery laminate is prepared, each battery consisting of anode, polymer electrolyte, cathode films and possibly an insulating film, under conditions suitable to constitute a rigid monoblock assembly, in which the films are unitary with one another. The assembly obtained is thereafter cut in predetermined shape by using a mechanical device without macroscopic deformation of the films constituting the assembly and without inducing permanent short circuits. The battery which is obtained after cutting includes at least one end which appears as a uniform cut, the various films constituting the assembly having undergone no macroscopic deformation, the edges of the films of the anode including an electronically insulating passivation film.

Gauthier, Michel (La Prairie, CA); Lessard, Ginette (Longueuil, CA); Dussault, Gaston (St-Benoit-de-Mirabel, CA); Rouillard, Roger (Beloeil, CA); Simoneau, Martin (Montreal, CA); Miller, Alan Paul (Woodbury, MN)

2003-09-09T23:59:59.000Z

299

E-Print Network 3.0 - artificial channel-cut monochromator Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Physics 20 INFLUENCE OF QUANTUM-DOTS DENSITY ON AVERAGE IN-PLANE STRAIN OF OPTOELECTRONIC DEVICES Summary: detector channel-cut Ge220 analyser sample X-ray tube point focus...

300

Want to Work on cutting-edge space exploration technology at honeybee robotics? Summer 2012 Internship  

E-Print Network [OSTI]

Want to Work on cutting-edge space exploration technology at honeybee robotics? Summer 2012 during the 10-week, full-time internship at the Honeybee Robotics facility in New York City (Manhattan

Manning, Sturt

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

On the cutting edge of biomedical engineering, IBBME is a unique, multidisciplinary  

E-Print Network [OSTI]

On the cutting edge of biomedical engineering, IBBME is a unique, multidisciplinary graduate solutions to the world's most pressing healthcare challenges. The leading biomedical engineering centre in Canada, the Institute of Biomaterials & Biomedical Engineering (IBBME) is an interdisciplinary graduate

Prodiæ, Aleksandar

302

Improving liquid chemical intervention methods to control pathogens on fresh-cut fruits and vegetables  

E-Print Network [OSTI]

Factors that affect liquid chemical intervention methods of controlling pathogens on fresh-cut produce were investigated. The relationship between produce tissue structure (intercellular space, cell size, and cell distribution) and the sanitizing...

Troya, Maria Rosa

2006-08-16T23:59:59.000Z

303

Survey of Materials for Nanoskiving and Influence of the Cutting Process on the  

E-Print Network [OSTI]

Survey of Materials for Nanoskiving and Influence of the Cutting Process on the Nanostructures materials (metals, ceramics, semiconductors, and conjugated polymers), deposition techniques (evaporation. The materials tested were: aluminum, titanium, nickel, copper, palladium, silver, platinum, gold, lead, bismuth

Church, George M.

304

Oxygen-assisted multipass cutting of carbon fiber reinforced plastics with ultra-short laser pulses  

SciTech Connect (OSTI)

Deep multipass cutting of bidirectional and unidirectional carbon fiber reinforced plastics (CFRP) with picosecond laser pulses was investigated in different static atmospheres as well as with the assistance of an oxygen or nitrogen gas flow. The ablation rate was determined as a function of the kerf depth and the resulting heat affected zone was measured. An assisting oxygen gas flow is found to significantly increase the cutting productivity, but only in deep kerfs where the diminished evaporative ablation due to the reduced laser fluence reaching the bottom of the kerf does not dominate the contribution of reactive etching anymore. Oxygen-supported cutting was shown to also solve the problem that occurs when cutting the CFRP parallel to the fiber orientation where a strong deformation and widening of the kerf, which temporarily slows down the process speed, is revealed to be typical for processing in standard air atmospheres.

Kononenko, T. V.; Komlenok, M. S.; Konov, V. I. [Natural Sciences Center, General Physics Institute, Vavilov str. 38, 119991 Moscow (Russian Federation); National Research Nuclear University, MEPhI, Kashirskoye shosse 31, 115409 Moscow (Russian Federation); Freitag, C. [Universitt Stuttgart, Institut fr Strahlwerkzeuge (IFSW), Pfaffenwaldring 43, 70569 Stuttgart (Germany); GSaME Graduate School of Excellence Advanced Manufacturing Engineering, Nobelstrasse 12, 70569 Stuttgart (Germany); Onuseit, V.; Weber, R.; Graf, T. [Universitt Stuttgart, Institut fr Strahlwerkzeuge (IFSW), Pfaffenwaldring 43, 70569 Stuttgart (Germany)

2014-03-14T23:59:59.000Z

305

WM00 Conference, February 27-March 2, 2000 DEMONSTRATING DIAMOND WIRE CUTTING OF THE TFTR  

E-Print Network [OSTI]

, 2000 2 carbon steel components such as pipe, plate, and tube bundles in heat exchangers. Some expected and specialized fabrication remote/semi-remote cutting operations. The plasma arc torch would also result

306

E-Print Network 3.0 - adjusted d-dimer cut-off Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

44 Study of the Response Function of the CUORE Bolometers towards a Neutrinoless Double Beta Decay Summary: sampling and cut-off frequency for each bolometer and adjust them...

307

The Beef Nutrient Database Improvement Study: Retail Cuts from the Loin and Round  

E-Print Network [OSTI]

The objective of this study was to update the existing nutritional data available in the USDA National Nutrient Database for Standard Reference by providing revised nutritional information on the round and loin cuts evaluated in Phase III...

Grimes, Haley

2012-07-16T23:59:59.000Z

308

The Mass Shell of the Nelson Model without Cut-Offs  

E-Print Network [OSTI]

The massless Nelson model describes non-relativistic, spinless quantum particles interacting with a relativistic, massless, scalar quantum field. The interaction is linear in the field. We analyze the one particle sector. First, we construct the renormalized mass shell of the non-relativistic particle for an arbitrarily small infrared cut-off that turns off the interaction with the low energy modes of the field. No ultraviolet cut-off is imposed. Second, we implement a suitable Bogolyubov transformation of the Hamiltonian in the infrared regime. This transformation depends on the total momentum of the system and is non-unitary as the infrared cut-off is removed. For the transformed Hamiltonian we construct the mass shell in the limit where both the ultraviolet and the infrared cut-off are removed. Our approach is constructive and leads to explicit expansion formulae which are amenable to rigorously control the S-matrix elements.

S. Bachmann; D. -A. Deckert; A. Pizzo

2011-06-09T23:59:59.000Z

309

ARPA-E Announces $60 Million for Disruptive Technologies to Cut...  

Office of Environmental Management (EM)

ARPA-E Announces 60 Million for Disruptive Technologies to Cut Emissions, Boost Energy Efficiency April 29, 2014 - 12:05pm Addthis News Media Contact (202) 586-4940 WASHINGTON -...

310

ENVELOPING SEMI-GROUP FOR MINIMAL ROTATIONS ON CUT UP TORI  

E-Print Network [OSTI]

are in general hard to identify, but the special class of topological eigen- values (the ones associatedENVELOPING SEMI-GROUP FOR MINIMAL ROTATIONS ON CUT UP TORI JEAN-BAPTISTE AUJOGUE Abstract

Paris-Sud XI, Université de

311

A comparison of vacuum packaging systems for the distribution and storage of primal beef cuts  

E-Print Network [OSTI]

A COMPARISON OF VACUUM PACKAGING SYSTEMS FOR THE / DISTRIBUTION AND STORAGE OF PRIMAL BEEP CUTS A Thesis by RODNEY AMES BOWLING Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement of the degree... of MASTER OP SCIENCE December 1974 Major Subject: Animal Science A COMPARISON OF VACUUM PACKAGING SYSTEMS FOR THE DISTRIBUTION AND STORAGE OF PRIMAL BEEF CUTS A Thesis by RODNEY AMES BOWLING Approved as to style and content by: (C hairman...

Bowling, Rodney Ames

1974-01-01T23:59:59.000Z

312

Identification of threshold levels for Warner-Bratzler shear force of beef value cuts  

E-Print Network [OSTI]

IDENTIFICATION OF THRESHOLD LEVELS FOR WARNER-BRATZLER SHEAR FORCE OF BEEF VALUE CUTS A Thesis by LEEANN SITKA Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August 2007 Major Subject: Animal Science IDENTIFICATION OF THRESHOLD LEVELS FOR WARNER-BRATZLER SHEAR FORCE OF BEEF VALUE CUTS A Thesis by LEEANN SITKA Submitted to the Office...

Sitka, LeeAnn

2009-06-02T23:59:59.000Z

313

Considerations for centralized packaging of beef retail cuts / by Davey Brian Griffin  

E-Print Network [OSTI]

CONSIDERATIONS FOR CENTRALIZED PACKAGING OF BEEF RETAIL CUTS A Thesis by DAVEY BRIAN GRIFFIN Submitted to the Graduate College of Texas ASM University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE December... 1981 Major Subject: Animal Science CONSIDERATIONS FOR CENTRALIZED PACKAGING OF BEEF RETAIL CUTS A Thesis by DAVEY BRIAN GRIFFIN Approved as to style and content by: (Co-Ch of Committee) o rman of Committee) (Member) ember) ( ber) ead of Depart...

Griffin, Davey Brian

2012-06-07T23:59:59.000Z

314

Equipment Energy Models Using Spreadsheet Programs  

E-Print Network [OSTI]

of heat pump and cogeneration power system analysis, steam properties I interpolation, boiler and combustion efficiency, and chiller performance are illustrated, with ~elpful hints to ensure successful application. 225 ESL-IE-85-05-42 Proceedings from... the Seventh National Industrial Energy Technology Conference, Houston, TX, May 12-15, 1985 ...

Gilbert, J. S.

315

The Regional Watershed Spreadsheet Model (RWSM)  

E-Print Network [OSTI]

WI Presenting on work developed by: The Small Tributaries Loading Strategy Workgroup BASMAA * SFEI Estimates #12;10. Improved Loads Estimates Small Tribs Small Tribs In-Bay Erosion Large Rivers PCBs Loads of this plan... Hydro Sed Cu Hg PCB Se Diox PBDE OC Pest Hydro Sed Cu Hg PCB Se Diox PBDE OC PestStep 1 2 3 4 5

316

Use and Misuse of Chemical Reactivity Spreadsheets  

SciTech Connect (OSTI)

Misidentifying chemical hazards can have serious deleterious effects. Consequences of not identifying a chemical are obvious and include fires, explosions, injury to workers, etc. Consequences of identifying hazards that are really not present can be equally as bad. Misidentifying hazards can result in increased work with loss of productivity, increased expenses, utilization/consumption of scarce resources, and the potential to modify the work to include chemicals or processes that are actually more hazardous than those originally proposed. For these reasons, accurate hazard identification is critical to any safety program. Hazard identification in the world of chemistry is, at best, a daunting task. The knowing or understanding, of the reactions between any of approximately twelve million known chemicals that may be hazardous, is the reason for this task being so arduous. Other variables, such as adding other reactants/contaminants or changing conditions (e.g., temperature, pressure, or concentration), make hazard determination something many would construe as being more than impossibly difficult. Despite these complexities, people who do not have an extensive background in the chemical sciences can be called upon to perform chemical hazard identification. Because hazard identification in the area of chemical safety is so burdensome and because people with a wide variety of training are called upon to perform this work, tools are required to aid in chemical hazard identification. Many tools have been developed. Unfortunately, many of these tools are not seen as the limited resource that they are and are used inappropriately.

Simmons, F

2005-09-20T23:59:59.000Z

317

Consortium Participant List - Spreadsheet | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebrate Earth Codestheatfor Optimized91 *09ofName TitleConsortium

318

IRP Budget Spreadsheet | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4InFindingIR-2003- More Documents &

319

ASHRAE Standard 152 Spreadsheet | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustionImprovement3 Beryllium-Associated6-05.pdf AL2006-05.pdfAMI SystemNEUP ProjectARRAAS&TASHRAE

320

Project Cost Profile Spreadsheet | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems Engineering Research and Development (PSEEnergy ProgressProject Cost Profile

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Building America Analysis Spreadsheets | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd: ScopeDepartment1,Energy ForBryan WheelerResidential

322

SIZE DISTRIBUTION AND RATE OF PRODUCTION OF AIRBORNE PARTICULATE MATTER GENERATED DURING METAL CUTTING  

SciTech Connect (OSTI)

During deactivation and decommissioning activities, thermal cutting tools, such as plasma torch, laser, and gasoline torch, are used to cut metals. These activities generate fumes, smoke and particulates. These airborne species of matter, called aerosols, may be inhaled if suitable respiratory protection is not used. Inhalation of the airborne metallic aerosols has been reported to cause ill health effects, such as acute respiratory syndrome and chromosome damage in lymphocytes. In the nuclear industry, metals may be contaminated with radioactive materials. Cutting these metals, as in size reduction of gloveboxes and tanks, produces high concentrations of airborne transuranic particles. Particles of the respirable size range (size < 10 {micro}m) deposit in various compartments of the respiratory tract, the fraction and the site in the respiratory tract depending on the size of the particles. The dose delivered to the respiratory tract depends on the size distribution of the airborne particulates (aerosols) and their concentration and radioactivity/toxicity. The concentration of airborne particulate matter in an environment is dependent upon the rate of their production and the ventilation rate. Thus, measuring aerosol size distribution and generation rate is important for (1) the assessment of inhalation exposures of workers, (2) the selection of respiratory protection equipment, and (3) the design of appropriate filtration systems. Size distribution of the aerosols generated during cutting of different metals by plasma torch was measured. Cutting rates of different metals, rate of generation of respirable mass, as well as the fraction of the released kerf that become respirable were determined. This report presents results of these studies. Measurements of the particles generated during cutting of metal plates with a plasma arc torch revealed the presence of particles with mass median aerodynamic diameters of particles close to 0.2 {micro}m, arising from condensation of vaporized material and subsequent rapid formation of aggregates. Particles of larger size, resulting from ejection of melted material or fragments from the cutting zone, were also observed. This study presents data regarding the metal cutting rate, particle size distribution, and their generation rate, while using different cutting tools and metals. The study shows that respirable particles constitute only a small fraction of the released kerf.

M.A. Ebadian, Ph.D.; S.K. Dua, Ph.D., C.H.P.; Hillol Guha, Ph.D.

2001-01-01T23:59:59.000Z

323

Restored Drill Cuttings for Wetlands Creation: Results of Mesocosm Approach to Emulate Field Conditions Under Varying Salinity and Hydrologic Conditions  

SciTech Connect (OSTI)

This study builds upon earlier research conducted by Southeastern Louisiana University concerning the efficacy of utilizing processed drill cuttings as an alternative substrate source for wetland rehabilitation (wetland creation and restoration). Previous research has indicated that processed drill cuttings exhibit a low degree of contaminant migration from the process drill cuttings to interstitial water and low toxicity, as tested by seven-day mysid shrimp chronic toxicity trials.

Hester, Mark W.; Shaffer, Gary P.; Willis Jonathan M.; DesRoches, Dennis J.

2001-02-21T23:59:59.000Z

324

An experimental study of the relationship between cuttings deposition and wellbore inclination in eccentric annuli  

E-Print Network [OSTI]

of Inclination on Cuttings Deposition (0 rpm data) 6 90 % Confidence Band on Regression Mean (0 rpm, AV = 2 ft/sec) 7 90 % Confidence Band on Regression Mean (0 rpm, AV = 3 ft/sec) 8 90 % Confidence Band on Regression Mean (0 rptn, AV = 4 ft/sec) 9 Effect... of Flow Rate on Cuttings Deposition (0 rpm data) 10 Mobil Data Comparison (0 rpm, AV = 2 ft/sec) 11 Mobil Data Comparison (0 rpm, AV = 3 ft/sec) 12 Mobil Data Comparison (0 rpm, AV = 4 ft/sec) 13 Iyoho Data Comparison (0 rpm data) page 26 44 45...

Colbert, John Wesley

1993-01-01T23:59:59.000Z

325

Comparison of systems for the distribution of lamb carcasses and wholesale cuts  

E-Print Network [OSTI]

COMPARISON OF SYSTEMS FOR THE DISTRIBUTION OF LAMB CARCASSES AND WHOLESALE CUTS A Thesis by JOSEPH DARYL TATUM Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE Play 1976 M+or SubJect: Animal Science (Meats) COMPARISON OF SYSTEMS FOR THE DISTRIBUTION OF LAMB CARCASSES AND WHOLESALE CUTS A Thesis by JOSEPH DARYL TATUM Approved as to style and content by: 0) o (Co-C a man of Committee) ( -Chairman...

Tatum, Joseph Daryl

1976-01-01T23:59:59.000Z

326

Effect of grooves cut on the periphery of a circular hole in bars subjected to tension  

E-Print Network [OSTI]

of FIASTER OF SClENCE August 1967 Plajor Suhj cot: ~Iechanical Engineerdng EI'1'ECT 01 GROOVES CUT OV THE PERIPHERY OF A CIRCULAR HOLE IN BARS SUBJECTED TO TENSION A Thesis by JUAN RICARDO SCHNALZ Approved as to style and content by: ~Head... ~ ~ ~ ~ ~ ~ ~ ~ ~ 19 20 21 Tube and 22 IV EFFECT. OF GROOVES CUT ON THZ PERIL'T~RX OF A CZN1ERZD CIRCULAR HOIZ IN BARS SUBJECTED TO TENSION . . . . . . . . . , 23 General Results and Discussion . . . 23 Comparison of Re ults and Conclu ion. 46 BIBLIOGRAPHY L9...

Schmalz, Juan Ricardo

1967-01-01T23:59:59.000Z

327

Fermi-level shifts in graphene transistors with dual-cut channels scraped by atomic force microscope tips  

SciTech Connect (OSTI)

We investigate the electronic properties of p-type graphene transistors on silicon dioxide with dual-cut channels that were scraped using atomic force microscope tips. In these devices, the current is forced to squeeze into the path between the two cuts rather than flow directly through the graphene sheet. We observe that the gate voltages with minimum current shift toward zero bias as the sizes of the dual-cut regions increase. These phenomena suggest that the Fermi levels in the dual-cut regions are shifted toward the Dirac points after the mechanical scraping process.

Lin, Meng-Yu [Institute of Electronics, National Taiwan University, Taipei 10617, Taiwan (China); Research Center for Applied Sciences, Academia Sinica, Taipei 11529, Taiwan (China); Chen, Yen-Hao [Department of Photonics, National Chiao Tung University, Hsinchu 30010, Taiwan (China); Su, Chen-Fung [College of Photonics, National Chiao Tung University, Tainan 71150, Taiwan (China); Chang, Shu-Wei [Research Center for Applied Sciences, Academia Sinica, Taipei 11529, Taiwan (China); Department of Photonics, National Chiao Tung University, Hsinchu 30010, Taiwan (China); Lee, Si-Chen [Institute of Electronics, National Taiwan University, Taipei 10617, Taiwan (China); Lin, Shih-Yen, E-mail: shihyen@gate.sinica.edu.tw [Institute of Electronics, National Taiwan University, Taipei 10617, Taiwan (China); Research Center for Applied Sciences, Academia Sinica, Taipei 11529, Taiwan (China); Department of Photonics, National Chiao Tung University, Hsinchu 30010, Taiwan (China)

2014-01-13T23:59:59.000Z

328

Is the governor right?: a study on cutting Texas property Texas [i.e. taxes  

E-Print Network [OSTI]

In the past few years the state of Texas, under the direction of Governor George W. Bush, has seriously considered the idea of cutting property taxes. Since schools are financed mainly through property taxes in Texas, this is an extremely important...

Tucker, Ryan J

2013-02-22T23:59:59.000Z

329

CUTTING SOLAR RED TAPECUTTING SOLAR RED TAPE Evergreen State Solar PartnershipEvergreen State Solar Partnership  

E-Print Network [OSTI]

CUTTING SOLAR RED TAPECUTTING SOLAR RED TAPE Evergreen State Solar PartnershipEvergreen State Solar Partnership Rooftop Solar Challenge 1 Sunshot #12;WASHINGTON PV CONTEXTWASHINGTON PV CONTEXT 285 cities, 39 Installations happen where process is easier #12;EVERGREEN STATE SOLAR PARTNERSHIP Commerce NWSEEDEdmonds

330

Two fungal symbioses collide: endophytic fungi are not welcome in leaf-cutting ant gardens  

E-Print Network [OSTI]

Two fungal symbioses collide: endophytic fungi are not welcome in leaf-cutting ant gardens Sunshine, while the leaf material they provide to their garden is usually filled with endophytic fungi. The ants and their cultivar may interact with hundreds of endophytic fungal species, yet little is known about

Bermingham, Eldredge

331

Two fungal symbioses collide: endophytic fungi are not welcome in leaf-cutting ant gardens  

E-Print Network [OSTI]

Two fungal symbioses collide: endophytic fungi are not welcome in leaf-cutting ant gardens Sunshine with their fungal garden, while the leaf material they provide to their garden is usually filled with endophytic fungi. The ants and their cultivar may interact with hundreds of endophytic fungal species, yet little

Bermingham, Eldredge

332

GDP Formulation of a segmented CDU Swing Cut Model for Refinery Planning  

E-Print Network [OSTI]

1 GDP Formulation of a segmented CDU Swing Cut Model for Refinery Planning (Performance Analysis. Grossmann #12;2 Motivation · Refinery planning is an active area in process systems that strongly relies HF REFINERY FUEL RG LPG LN HN KN GO1 GO2 VGO VR1 VR2 C1 LPG LIGHT NAPHTHA PMS 98 MOGAS 95 JET FUEL

Grossmann, Ignacio E.

333

A Cut-Cell Approach for 2D Cartesian Meshes that Preserves Orthogonal Grid Sweep Ordering  

SciTech Connect (OSTI)

In this paper, we present a cut-cell methodology for solving the two-dimensional neutral-particle transport equation on an orthogonal Cartesian grid. We allow the rectangular cell to be subdivided into two polygonal subcells. We ensure that this division (or cut) conserves the volumes of the materials in the subcells and we utilize a step-characteristics (SC) slice balance approach (SBA) to calculate the angular fluxes exiting the cell as well as the average scalar fluxes in each subcell. Solving the discrete ordinates transport equation on an arbitrary mesh has historically been difficult to parallelize while maintaining good parallel efficiency. However on Cartesian meshes, the KBA algorithm maintains good parallel efficiency using a direct solve. The ability to preserve this algorithm was a driving factor in the development of our cut-cell method. This method also provides a more accurate depiction of a material interface in a cell, which leads to more accurate solutions downstream of this cell. As a result, fewer spatial cells can be utilized, resulting in reduced memory requirements. We apply this approach in the 2D/3D discrete ordinates neutral-particle transport code Denovo, where we analyze a 2D 3 x 3 lattice of pincells. We show that, for eigenvalue problems, a significant increase in accuracy for a given mesh size is gained by utilizing the cut-cell, SC equations instead of the standard homogenized-cell, SC equations.

Jarrell, Joshua J [ORNL] [ORNL; Grove, Robert E [ORNL] [ORNL; Evans, Thomas M [ORNL] [ORNL

2011-01-01T23:59:59.000Z

334

Improved bounds and algorithms for graph cuts and network reliability David G. Harris  

E-Print Network [OSTI]

Improved bounds and algorithms for graph cuts and network reliability David G. Harris Aravind, the graphs we deal with will be multi-graphs with no self-loops. We define R(p), the reliability polyno- mial there is no currently known algorithm for estimating R(p), the complementary probability U(p) = 1 - R(p), which we

Srinivasan, Aravind

335

Measuring multiple residual-stress components using the contour method and multiple cuts  

SciTech Connect (OSTI)

The conventional contour method determines one component of stress over the cross section of a part. The part is cut into two, the contour of the exposed surface is measured, and Bueckner's superposition principle is analytically applied to calculate stresses. In this paper, the contour method is extended to the measurement of multiple stress components by making multiple cuts with subsequent applications of superposition. The theory and limitations are described. The theory is experimentally tested on a 316L stainless steel disk with residual stresses induced by plastically indenting the central portion of the disk. The stress results are validated against independent measurements using neutron diffraction. The theory has implications beyond just multiple cuts. The contour method measurements and calculations for the first cut reveal how the residual stresses have changed throughout the part. Subsequent measurements of partially relaxed stresses by other techniques, such as laboratory x-rays, hole drilling, or neutron or synchrotron diffraction, can be superimposed back to the original state of the body.

Prime, Michael B [Los Alamos National Laboratory; Swenson, Hunter [Los Alamos National Laboratory; Pagliaro, Pierluigi [U. PALERMO; Zuccarello, Bernardo [U. PALERMO

2009-01-01T23:59:59.000Z

336

Analysis of laser remote fusion cutting based on a mathematical model  

SciTech Connect (OSTI)

Laser remote fusion cutting is analyzed by the aid of a semi-analytical mathematical model of the processing front. By local calculation of the energy balance between the absorbed laser beam and the heat losses, the three-dimensional vaporization front can be calculated. Based on an empirical model for the melt flow field, from a mass balance, the melt film and the melting front can be derived, however only in a simplified manner and for quasi-steady state conditions. Front waviness and multiple reflections are not modelled. The model enables to compare the similarities, differences, and limits between laser remote fusion cutting, laser remote ablation cutting, and even laser keyhole welding. In contrast to the upper part of the vaporization front, the major part only slightly varies with respect to heat flux, laser power density, absorptivity, and angle of front inclination. Statistical analysis shows that for high cutting speed, the domains of high laser power density contribute much more to the formation of the front than for low speed. The semi-analytical modelling approach offers flexibility to simplify part of the process physics while, for example, sophisticated modelling of the complex focused fibre-guided laser beam is taken into account to enable deeper analysis of the beam interaction. Mechanisms like recast layer generation, absorptivity at a wavy processing front, and melt film formation are studied too.

Matti, R. S. [Department of Engineering Sciences and Mathematics, Lule University of Technology, S-971 87 Lule (Sweden); Department of Mechanical Engineering, College of Engineering, University of Mosul, Mosul (Iraq); Ilar, T.; Kaplan, A. F. H. [Department of Engineering Sciences and Mathematics, Lule University of Technology, S-971 87 Lule (Sweden)

2013-12-21T23:59:59.000Z

337

Chapter 7 -Welding The dangers in welding, cutting, heating and grinding should never be underestimated.  

E-Print Network [OSTI]

36 Chapter 7 - Welding The dangers in welding, cutting, heating and grinding should never and to understand the hazards involved. Spot the hazard Hazards associated with welding include: · The arc itself eyes can become extremely red and sore and in extreme cases suffer permanent damage. · Welding gases

338

NREL Recommends Ways to Cut Building Energy Costs in Half (Fact Sheet)  

SciTech Connect (OSTI)

Building designers and operators could cut energy use by 50% in large office buildings, hospitals, schools, and a variety of stores - including groceries, general merchandise outlets, and retail outlets - by following the recommendations of researchers at the National Renewable Energy Laboratory (NREL).

Not Available

2011-07-01T23:59:59.000Z

339

GEODESIC HAMSANDWICH CUTS # Prosenjit Bose + Erik D. Demaine # Ferran Hurtado John Iacono Stefan Langerman #  

E-Print Network [OSTI]

GEODESIC HAM­SANDWICH CUTS # Prosenjit Bose + Erik D. Demaine # Ferran Hurtado § John Iacono­sandwich geodesic is a shortest path in P between two points on the boundary of P that simultaneously bisects­sandwich geodesic. We also show that this algorithm is optimal in the algebraic computation tree model when

Morin, Pat

340

Reed cutting affects arthropod communities, potentially reducing food for passerine birds  

E-Print Network [OSTI]

March 2004 Abstract Winter cutting of Common Reed Phragmites australis (Poaceae) is increasing; Habitat management 1. Introduction Monospecific stands of Common Reed Phragmites australis are widely for passerine birds. Consequently, large-scale mechanically harvested reed beds host altered ar- thropod

Richner, Heinz

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Estimating attenuation properties of bentonite layer in Cut Bank oil field, Glacier County, Montana  

E-Print Network [OSTI]

-8 to analyze the formation structure in depth, since seismic signals around the reservoir area were unclear in the 3-D survey. This research attempts to estimate the attenuation properties of the Bentonite layer in the Cut Bank oil field. VSP data is processed...

Karakurt, Necdet

2006-04-12T23:59:59.000Z

342

Effects of exogenous ABA on photosynthesis and stomatal conductance of cut twigs from oak seedlings  

E-Print Network [OSTI]

Effects of exogenous ABA on photosynthesis and stomatal conductance of cut twigs from oak seedlings of the observed decline in net photosynthesis (Downton etal., 1988) or is there some direct ef- fect of ABA on mesophyll photosynthesis (Raschke and Hedrich, 1985)? Do forest trees display the same responses to ABA

Paris-Sud XI, Universit de

343

A Short Cut to Deforestation Andrew Gill John Launchbury Simon L Peyton Jones  

E-Print Network [OSTI]

A Short Cut to Deforestation Andrew Gill John Launchbury Simon L Peyton Jones Department example of just such a transformation is deforestation (Wadler 1990]). Deforestation removes arbitrary]), we know of no mature com- piler that uses deforestation as part of its regular optimisa- tions

Jones, Simon Peyton

344

Nectar and pollen sugars constituting larval provisions of the alfalfa leaf-cutting bee (Megachile rotundata)  

E-Print Network [OSTI]

Nectar and pollen sugars constituting larval provisions of the alfalfa leaf-cutting bee (Megachile July 2010 ­ Accepted 2 July 2010 Abstract ­ As with most solitary bees, larvae of the alfalfa leaf constituted about half of the provision fresh weight. Sucrose in alfalfa pollen and nectar is absent from

345

Story Scripting for Automating Cinematics and Cut-Scenes in Video Games  

E-Print Network [OSTI]

. This paper discusses these story scripting elements in depth, along with a prototype software engine capableStory Scripting for Automating Cinematics and Cut-Scenes in Video Games W. Zhang, M. Mc for writers to directly create and integrate story content into games on their own, and they must instead rely

Katchabaw, Michael James

346

Dynamic Ham-Sandwich Cuts of Convex Polygons in the Plane Timothy Abbott  

E-Print Network [OSTI]

the vertex-count measure, the intersection of these two lines gives a point of Tukey depth n/4, which serves as an ap- proximate Tukey median. 1 Introduction Finding a ham-sandwich cut is a well-studied problem. Langerman@ulb.ac.be. A two-line partition also serves as an approximate Tukey median or centerpoint; see, e

347

Cartesian Cut Cell Two-Fluid Solver for Hydraulic Flow Problems  

E-Print Network [OSTI]

Cartesian Cut Cell Two-Fluid Solver for Hydraulic Flow Problems L. Qian1 ; D. M. Causon2 ; D. M. Ingram3 ; and C. G. Mingham4 Abstract: A two-fluid solver which can be applied to a variety of hydraulic with a sloping beach is also calculated to demonstrate the applicability of the method to real hydraulic problems

Ingram, David

348

A Discriminative Model-Constrained Graph Cuts Approach to Fully Automated Pediatric  

E-Print Network [OSTI]

A Discriminative Model-Constrained Graph Cuts Approach to Fully Automated Pediatric Brain Tumor of Radiology, University Medical Center, Erlangen, Germany 4 Siemens, CT SE SCR 2, Erlangen, Germany Abstract. In this paper we present a fully automated approach to the segmentation of pediatric brain tumors in multi

Carneiro, Gustavo

349

innovati nAward-Winning Etching Process Cuts Solar Cell Costs  

E-Print Network [OSTI]

are wasted. Manufacturers have devised ways to boost the amount of light absorbed by silicon solar cellsinnovati nAward-Winning Etching Process Cuts Solar Cell Costs In general, when it comes to photovoltaic (PV) solar cells, the higher their efficiency, the higher their price tag. To increase cell

350

SmartCharge: Cutting the Electricity Bill in Smart Homes with Energy Storage  

E-Print Network [OSTI]

SmartCharge: Cutting the Electricity Bill in Smart Homes with Energy Storage Aditya Mishra, David,irwin,shenoy,kurose}@cs.umass.edu Ting Zhu Binghamton University tzhu@binghamton.edu ABSTRACT Market-based electricity pricing provides consumers an op- portunity to lower their electric bill by shifting consump- tion to low price periods

Shenoy, Prashant

351

NREL Recommends Ways to Cut Building Energy Costs in Half (Fact Sheet)  

SciTech Connect (OSTI)

Building designers and operators could cut energy use by 50% in large office buildings, hospitals, schools, and a variety of stores -- including groceries, general merchandise outlets, and retail outlets -- by following the recommendations of NREL researchers. The innovative energy-saving recommendations are contained in technical support documents and Advanced Energy Design Guides compiled by NREL.

Not Available

2013-08-01T23:59:59.000Z

352

New infrared cut-off for the holographic scalar fields models of dark energy  

E-Print Network [OSTI]

Introducing a new infrared cut-off for the holographic dark-energy, we study the correspondence between the quintessence, tachyon, K-essence and dilaton energy density with this holographic dark energy density in the flat FRW universe. This correspondence allows to reconstruct the potentials and the dynamics for the scalar fields models, which describe accelerated expansion.

L. N. Granda; A. Oliveros

2008-10-23T23:59:59.000Z

353

Cutting Down Electricity Cost in Internet Data Centers by Using Energy Storage  

E-Print Network [OSTI]

Cutting Down Electricity Cost in Internet Data Centers by Using Energy Storage Yuanxiong Guo energy storage capability in data centers to reduce electricity bill under real-time electricity market between cost saving and energy storage capacity. As far as we know, our work is the first to explore

Latchman, Haniph A.

354

High speed cutting with industrial robots: Towards model based compensation of deviations  

E-Print Network [OSTI]

, [abele|bauer|weigold]@ptw.tu-darmstadt.de Abstract Application of industrial robots for high speedHigh speed cutting with industrial robots: Towards model based compensation of deviations Modeling and numerical simulation of the industrial robot with elastic joints Dr.-Ing. M. Stelzer and Prof. Dr. rer. nat

Stryk, Oskar von

355

Gas Dynamic Effects On Laser Cut Quality Kai Chen, Y. Lawrence Yao, and Vijay Modi  

E-Print Network [OSTI]

Gas Dynamic Effects On Laser Cut Quality Kai Chen, Y. Lawrence Yao, and Vijay Modi Department are very sensitive to gas jet pressure and nozzle standoff distance. Do a high gas pressure and a small shows the same behavior (i.e., discontinuity as gas pressure and standoff change

Yao, Y. Lawrence

356

Senate Vent Tent Faculty, Staff, and Student Responses to CSU Budget Cuts  

E-Print Network [OSTI]

Senate Vent Tent Faculty, Staff, and Student Responses to CSU Budget Cuts In late July, the CSU Board of Trustees adopted a strategy to deal with a budget shortfall of $584 million (relative to the state budget enacted in January), or nearly 20% of the CSU budget. To give a perspective on the size

de Lijser, Peter

357

U.S. Smart Grid Finding new ways to cut carbon  

E-Print Network [OSTI]

U.S. Smart Grid Finding new ways to cut carbon and create jobs April 19, 2011 Marcy Lowe, Hua Fan and Gary Gereffi Contributing CGGC researcher: Ghada Ahmed #12;U.S. Smart Grid 2 This research was prepared on Globalization, Governance & Competitiveness Duke University #12;U.S. Smart Grid 3 Table of contents Executive

Ferrari, Silvia

358

A heuristic to generate rank-1 GMI cuts Sanjeeb Dash Mathematical ...  

E-Print Network [OSTI]

Oct 14, 2009 ... branc h -and-bound to solv e an MI P arising in a practical ... f actors in h ibiting extensiv e generation o f GMI cuts in solv ing MI P s are t h at a f...

2009-10-14T23:59:59.000Z

359

innovati nNREL Recommends Ways to Cut Building Energy Costs in Half  

E-Print Network [OSTI]

the basis for the 50% Advanced Energy Design Guide (AEDG) books. These user-friendly guides are the secondinnovati nNREL Recommends Ways to Cut Building Energy Costs in Half Building designers of capabilities, NREL leads an integrated approach across the spectrum of renewable energy innovation. From

360

Green Chemistry The smartest way to cut pollution is to prevent it. That's the motto of  

E-Print Network [OSTI]

31 Green Chemistry The smartest way to cut pollution is to prevent it. That's the motto of "green ­ in this case oil ­ interacts with oxygen. However, common indus- trial oxidation methods are highly polluting, oxygen obtained from air is used as a reactant, with water being the main waste product. Prof. Ronny

Maoz, Shahar

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Branch-cut singularities in the thermodynamics of Fermi liquid systems  

E-Print Network [OSTI]

#12;Search for non analyticity: If f is smooth and regular in the vicinity of f=0, the standard-analyticities associated with branch-cuts enter via ring diagrams, i.e., ladders which are closed onto themselves p+q p -p, the dominant terms are generated in the thermodynamic potential. In ladders the non- analyticities associated

Fominov, Yakov

362

Taming Data Complexity in Lifelogs: Exploring Visual Cuts of Personal Informatics Data  

E-Print Network [OSTI]

-based self-tracking devices and applications, questions arise about how personal informatics tools can better of devices and applications are becoming increasingly popular for collecting and tracking personal dataTaming Data Complexity in Lifelogs: Exploring Visual Cuts of Personal Informatics Data Daniel A

Munson, Sean A.

363

In "Handbook of Mathematical Models in Computer Vision", Springer, 2006 p.1 Graph Cuts in Vision and Graphics  

E-Print Network [OSTI]

and Graphics: Theories and Applications Yuri Boykov and Olga Veksler Computer Science, The University the corresponding graph. Thus, many applications in vision and graphics use min-cut algorithms as a tool for computing optimal hypersurfaces. Secondly, graph-cuts also work as a powerful energy minimization tool

Boykov, Yuri

364

Regression equations that predict the yield of pork four lean cuts and primals as influenced by cutting method and trim level  

E-Print Network [OSTI]

levels of 1. 27 and . 64 cm of external fat including a partially skinned ham and picnic shoulder, along with separable lean from the four lean cuts. Grisdale et al. (1984a) reported fat-standardized lean as a percentage of the carcass weight..., a bootjack is formed in the belly at a 20 degree angle. The foot was removed perpendicular to the length of the shank 1. 27 cm below the proximal end of the tuber calcis. Pelvic fat, flank musde, and lymph glands and associated fat were removed...

Grams, David Wayne

1993-01-01T23:59:59.000Z

365

Due Cut  

E-Print Network [OSTI]

rucksack, he could hear the question in his own voice?the nearly forlorn sound of it. Perhaps Ray had been right to emphasize that there would be only cm friendship between them in the future, as there had been in the past. Before Victoria. Before... risking whiplash trying to keep track of the f?? things that had changed. Ray took Fraser's rucksack and dumped it in the bedroom, while Dief climbed into the red chair that no one else sat in any more. Fraser stood still for a moment then started...

Glasgow, M.F.

2002-01-01T23:59:59.000Z

366

The application of metal cutting technologies in tasks performed in radioactive environments  

SciTech Connect (OSTI)

The design and use of equipment to perform work in radioactive environments is uniquely challenging. Some tasks require that the equipment be operated by a person wearing a plastic suit or full face respirator and donning several pairs of rubber gloves. Other applications may require that the equipment be remotely controlled. Other important, design considerations include material compatibility, mixed waste issues, tolerance to ionizing radiation, size constraints and weight capacities. As always, there is the ``We need it ASAP`` design criteria. This paper describes four applications where different types of metal cutting technologies were used to successfully perform tasks in radioactive environments. The technologies include a plasma cutting torch, a grinder with an abrasive disk, a hydraulic shear, and a high pressure abrasive water jet cutter.

Fogle, R.F.; Younkins, R.M.

1997-05-01T23:59:59.000Z

367

Cut set-based risk and reliability analysis for arbitrarily interconnected networks  

DOE Patents [OSTI]

Method for computing all-terminal reliability for arbitrarily interconnected networks such as the United States public switched telephone network. The method includes an efficient search algorithm to generate minimal cut sets for nonhierarchical networks directly from the network connectivity diagram. Efficiency of the search algorithm stems in part from its basis on only link failures. The method also includes a novel quantification scheme that likewise reduces computational effort associated with assessing network reliability based on traditional risk importance measures. Vast reductions in computational effort are realized since combinatorial expansion and subsequent Boolean reduction steps are eliminated through analysis of network segmentations using a technique of assuming node failures to occur on only one side of a break in the network, and repeating the technique for all minimal cut sets generated with the search algorithm. The method functions equally well for planar and non-planar networks.

Wyss, Gregory D. (Albuquerque, NM)

2000-01-01T23:59:59.000Z

368

Dimming LEDs with Phase-Cut Dimmers: The Specifier's Process for Maximizing Success  

SciTech Connect (OSTI)

This report reviews how phase-cut dimmers work, how LEDs differ from the incandescent lamps that the dimmers were historically designed to control, and how these differences can lead to complications when trying to dim LEDs. Compatibility between a specific LED source and a specific phase-cut dimmer is often unknown and difficult to assess, and ensuring compatibility adds complexity to the design, specification, bidding, and construction observation phases for new buildings and major remodel projects. To maximize project success, this report provides both general guidance and step-by-step procedures for designing phase-controlled LED dimming on both new and existing projects, as well as real-world examples of how to use those procedures.

Miller, Naomi J.; Poplawski, Michael E.

2013-10-01T23:59:59.000Z

369

Multiresolution Techniques for Interactive Texture-Based Rendering of Arbitrarily Oriented Cutting Planes  

SciTech Connect (OSTI)

We present a multiresolution technique for interactive texture based rendering of arbitrarily oriented cutting planes for very large data sets. This method uses an adaptive scheme that renders the data along a cutting plane at different resolutions: higher resolution near the point-of-interest and lower resolution away from the point-of-interest. The algorithm is based on the segmentation of texture space into an octree, where the leaves of the tree define the original data and the internal nodes define lower-resolution versions. Rendering is done adaptively by selecting high-resolution cells close to a center of attention and low-resolution cells away from it. We limit the artifacts introduced by this method by blending between different levels of resolution to produce a smooth image. This technique can be used to produce viewpoint-dependent renderings.

LaMar, E; Duchaineau, M A; Hamann, B; Joy, K I

2001-10-03T23:59:59.000Z

370

GDP Formulation of a segmented CDU Swing Cut Model for Refinery Planning  

E-Print Network [OSTI]

1 GDP Formulation of a segmented CDU Swing Cut Model for Refinery Planning Department of Chemical · Refinery planning is an active area in process systems that strongly relies on the accuracy of the CDU REFINERY FUEL RG LPG LN HN KN GO1 GO2 VGO VR1 VR2 C1 LPG LIGHT NAPHTHA PMS 98 MOGAS 95 JET FUEL AGO HGO HFO

Grossmann, Ignacio E.

371

Cuttings Analysis At Silver Peak Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable Solutions LLC JumpCrow Lake Wind JumpCuttings Analysis At New River

372

Cuttings Analysis At The Needles Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable Solutions LLC JumpCrow Lake Wind JumpCuttings Analysis At New

373

JOURNAL OF OPTIMIZATION THEORY AND APPLICATIONS: Vol. 102, No. 3, pp. 497-524, SEPTEMBER 1999 Convergent Cutting-Plane and Partial-Sampling  

E-Print Network [OSTI]

. Multistage stochastic programming, cutting planes, sam- pling, convergence with probability one. 1 Convergent Cutting-Plane and Partial-Sampling Algorithm for Multistage Stochastic Linear Programs for multistage stochastic linear programs with recourse where random quantities in different stages

Powell, Warren B.

374

Vibration suppression in cutting tools using collocated piezoelectric sensors/actuators with an adaptive control algorithm  

SciTech Connect (OSTI)

The machining process is very important in many engineering applications. In high precision machining, surface finish is strongly correlated with vibrations and the dynamic interactions between the part and the cutting tool. Parameters affecting these vibrations and dynamic interactions, such as spindle speed, cut depth, feed rate, and the part's material properties can vary in real-time, resulting in unexpected or undesirable effects on the surface finish of the machining product. The focus of this research is the development of an improved machining process through the use of active vibration damping. The tool holder employs a high bandwidth piezoelectric actuator with an adaptive positive position feedback control algorithm for vibration and chatter suppression. In addition, instead of using external sensors, the proposed approach investigates the use of a collocated piezoelectric sensor for measuring the dynamic responses from machining processes. The performance of this method is evaluated by comparing the surface finishes obtained with active vibration control versus baseline uncontrolled cuts. Considerable improvement in surface finish (up to 50%) was observed for applications in modern day machining.

Radecki, Peter P [Los Alamos National Laboratory; Farinholt, Kevin M [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory; Bement, Matthew T [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

375

Joining aluminum to titanium alloy by friction stir lap welding with cutting pin  

SciTech Connect (OSTI)

Aluminum 1060 and titanium alloy Ti-6Al-4V plates were lap joined by friction stir welding. A cutting pin of rotary burr made of tungsten carbide was employed. The microstructures of the joining interface were observed by scanning electron microscopy. Joint strength was evaluated by a tensile shear test. During the welding process, the surface layer of the titanium plate was cut off by the pin, and intensively mixed with aluminum situated on the titanium plate. The microstructures analysis showed that a visible swirl-like mixed region existed at the interface. In this region, the Al metal, Ti metal and the mixed layer of them were all presented. The ultimate tensile shear strength of joint reached 100% of 1060Al that underwent thermal cycle provided by the shoulder. - Highlights: Black-Right-Pointing-Pointer FSW with cutting pin was successfully employed to form Al/Ti lap joint. Black-Right-Pointing-Pointer Swirl-like structures formed due to mechanical mixing were found at the interface. Black-Right-Pointing-Pointer High-strength joints fractured at Al suffered thermal cycle were produced.

Wei, Yanni [State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072 (China) [State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072 (China); Shaanxi Key Laboratory of Friction Welding Technologies, Northwestern Polytechnical University, Xi'an 710072 (China); Li, Jinglong, E-mail: lijinglg@nwpu.edu.cn [Shaanxi Key Laboratory of Friction Welding Technologies, Northwestern Polytechnical University, Xi'an 710072 (China)] [Shaanxi Key Laboratory of Friction Welding Technologies, Northwestern Polytechnical University, Xi'an 710072 (China); Xiong, Jiangtao [State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072 (China) [State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072 (China); Shaanxi Key Laboratory of Friction Welding Technologies, Northwestern Polytechnical University, Xi'an 710072 (China); Huang, Fu; Zhang, Fusheng; Raza, Syed Hamid [Shaanxi Key Laboratory of Friction Welding Technologies, Northwestern Polytechnical University, Xi'an 710072 (China)] [Shaanxi Key Laboratory of Friction Welding Technologies, Northwestern Polytechnical University, Xi'an 710072 (China)

2012-09-15T23:59:59.000Z

376

DEVELOPMENT OF GLASS AND GLASS CERAMIC PROPPANTS FROM GAS SHALE WELL DRILL CUTTINGS  

SciTech Connect (OSTI)

The objective of this study was to develop a method of converting drill cuttings from gas shale wells into high strength proppants via flame spheroidization and devitrification processing. Conversion of drill cuttings to spherical particles was only possible for small particle sizes (< 53 {micro}m) using a flame former after a homogenizing melting step. This size limitation is likely to be impractical for application as conventional proppants due to particle packing characteristics. In an attempt to overcome the particle size limitation, sodium and calcium were added to the drill cuttings to act as fluxes during the spheroidization process. However, the flame former remained unable to form spheres from the fluxed material at the relatively large diameters (0.5 - 2 mm) targeted for proppants. For future work, the flame former could be modified to operate at higher temperature or longer residence time in order to produce larger, spherical materials. Post spheroidization heat treatments should be investigated to tailor the final phase assemblage for high strength and sufficient chemical durability.

Johnson, F.; Fox, K.

2013-10-02T23:59:59.000Z

377

Optical probe for determining the fat/lean interface in cuts of meat  

DOE Patents [OSTI]

An apparatus and method for locating the boundary surface between a layer of fatty tissue and lean tissue in a cut of meat, such as beef, such as slabs of meat undergoing trimming and cutting in commercial meet processing facilitates. The invention exploits the fact that fatty tissue and lean tissue have significantly different responses to incident light energy. By gauging the degree to which a generated beam of light is scattered and reflected by the tissues under evaluation, the invention permits the character of the tissue to be ascertained. An incident beam of light, such as green light, is generated and transmitted to a probe tip, which tip is inserted into the cut of meat under investigation. The light beam is emitted into the meat tissues from the probe tip, and then is scattered and reflected by the tissues, whereupon some fraction of the emitted light returns to the probe tip. The returning light energy is transmitted to a detector; relative changes in the returning light transmitted to the detector permit the operator to determine when the probe tip is approaching or penetrating the fat/lean tissue interface.

Weber, Thomas M.; Callow, Diane S.; Jones, James F.; Kuehl, Michael A.; Spletzer, Barry L.

2005-02-22T23:59:59.000Z

378

The influence of auxin concentration and duration of treatment on the rooting of girdled slash pine cuttings  

E-Print Network [OSTI]

were cuttings from non-hedged trees. Repeated (serial) propagation by cuttings has also been used to maintain juvenility in forest trees (Libby 1974 and references therein). Root init1at1on requires energy and the primary source... growth (W. J. Whittington, ed), p 42-53. Butterworths, London. 450 p. Kleinschmit, J. 1974. A programme for large-scale cuttings propa- gation of Norway spruce. NZ J Forest Sci 4:359-366. Kri shnamoorthy, H. N . 1970 . Promotion of rooting in mung...

Cunningham, Michael Wesley

1981-01-01T23:59:59.000Z

379

Three-photon near-infrared quantum cutting in Tm{sup 3+}-doped transparent oxyfluoride glass ceramics  

SciTech Connect (OSTI)

Efficient three-step sequential three-photon near-infrared (NIR) quantum cutting in Tm{sup 3+}-doped transparent oxyfluoride glass ceramics has been demonstrated, where an absorbed blue photon could be cut into three NIR photons at 1190, 1460, and 1800 nm with quantum yield greater than unity. On the basis of static and dynamic photoemission, monitored excitation, and time-resolved fluorescence spectra, we investigate in detail the underlying optoelectronic mechanism. Further development of an efficient triply-cutting material might open up a path towards ultra-efficient photonic devices, which enables more photons emitted than absorbed in the excitation process.

Yu, D. C.; Zhang, J. P.; Chen, Q. J.; Zhang, W. J.; Yang, Z. M.; Zhang, Q. Y. [State Key Laboratory of Luminescence Materials and Devices, and Institute of Optical Communication Materials, South China University of Technology, Guangzhou 510641 (China)

2012-10-22T23:59:59.000Z

380

Testing of Alternative Abrasives for Water-Jet Cutting at C Tank Farm  

SciTech Connect (OSTI)

Legacy waste from defense-related activities at the Hanford Site has predominantly been stored in underground tanks, some of which have leaked; others may be at risk to do so. The U.S. Department of Energys goal is to empty the tanks and transform their contents into more stable waste forms. To do so requires breaking up, and creating a slurry from, solid wastes in the bottoms of the tanks. A technology developed for this purpose is the Mobile Arm Retrieval System. This system is being used at some of the older single shell tanks at C tank farm. As originally planned, access ports for the Mobile Arm Retrieval System were to be cut using a high- pressure water-jet cutter. However, water alone was found to be insufficient to allow effective cutting of the steel-reinforced tank lids, especially when cutting the steel reinforcing bar (rebar). The abrasive added in cutting the hole in Tank C-107 was garnet, a complex natural aluminosilicate. The hardness of garnet (Mohs hardness ranging from H 6.5 to 7.5) exceeds that of solids currently in the tanks, and was regarded to be a threat to Hanford Waste Treatment and Immobilization Plant systems. Olivine, an iron-magnesium silicate that is nearly as hard as garnet (H 6.5 to 7), has been proposed as an alternative to garnet. Pacific Northwest National Laboratory proposed to test pyrite (FeS2), whose hardness is slightly less (H 6 to 6.5) for 1) cutting effectiveness, and 2) propensity to dissolve (or disintegrate by chemical reaction) in chemical conditions similar to those of tank waste solutions. Cutting experiments were conducted using an air abrader system and a National Institute of Standards and Technology Standard Reference Material (SRM 1767 Low Alloy Steel), which was used as a surrogate for rebar. The cutting efficacy of pyrite was compared with that of garnet and olivine in identical size fractions. Garnet was found to be most effective in removing steel from the target; olivine and pyrite were less effective, but about equal to each other. The reactivity of pyrite, compared to olivine and garnet, was studied in high-pH, simulated tank waste solutions in a series of bench-top experiments. Variations in temperature, degree of agitation, grain size, exposure to air, and presence of nitrate and nitrite were also studied. Olivine and garnet showed no sign of dissolution or other reaction. Pyrite was shown to react with the fluids in even its coarsest variation (150?1000 ?m). Projected times to total dissolution for most experiments range from months to ca. 12 years, and the strongest control on reaction rate is the grain size.

Krogstad, Eirik J.

2013-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Influences of recovery from clear-cut, climate variability, and thinning on the carbon balance of a young  

E-Print Network [OSTI]

Influences of recovery from clear-cut, climate variability, and thinning on the carbon balance secondary effects www.elsevier.com/locate/agrformet Agricultural and Forest Meteorology 130 (2005) 207

Cohen, Ronald C.

382

Progress report to the International Cut Flower Growers Association Calorespirometry: a novel approach to predicting energy requirements of greenhouse  

E-Print Network [OSTI]

Progress report to the International Cut Flower Growers Association Calorespirometry: a novel approach to predicting energy requirements of greenhouse flower crops Heiner Lieth, Plant Sciences to its energy utilization. With this technique it is possible to determine various metabolic rates

Lieth, J. Heinrich

383

Effects of some chemical substances on germination, root development, and growth of the stem cuttings of sugar cane  

E-Print Network [OSTI]

EFFECTS OF SOME CHEMICAL SUBSTANCES ON GERMINATION, ROOT DEVELOPMENT, AND GROWTH OF THE STEM CUTTINGS OF SUGARCANE A.Dissertation By MOHAMMAD ABDULLAH KHAN Approved as to style and content by: ,/Chairman of Committee May 1953 EFFECTS OF SOME... CHEMICAL SUBSTANCES ON GERMINATION, ROOT DEVELOPMENT, AND GROWTH OF THE STEM CUTTINGS OF SUGARCANE By MOHAMMAD ABDULLAH KHAN 111 A Dissertation Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in partial...

Khan, Mohammad Abdullah

1953-01-01T23:59:59.000Z

384

Impact of different subcutaneous fat trim levels on the composition of beef retail cuts  

E-Print Network [OSTI]

from the top mund, bottom round, eye of mund, sirloin tip, top sirloin butt, strip loin, tenderloin, rib, arm and blade sections of the chuck, and brisket. The retail cuts were serially assigned to the following treatments: (A) trimmed to 0. 6 cm... external fat, raw; (B) ~ to 0. 6 cm external fat, cooked; (C) ~ to 0. 0 cm external fat, cooked. The samples that were treated as raw, trimmed to 0. 6 cm were dissected into separable lean, external fat, seam fat, and heavy connective tissue and bone...

Jones, Darron Kirk

1988-01-01T23:59:59.000Z

385

Method and device for stand-off laser drilling and cutting  

DOE Patents [OSTI]

A device for perforating material and a method of stand-off drilling using a laser. In its basic form a free-running laser beam creates a melt on the target and then a Q-switched short duration pulse is used to remove the material through the creation of a laser detonation wave. The advantage is a drilling/cutting method capable of working a target at lengthy stand-off distance. The device may employ 2 lasers or a single one operated in a free-running/Q-switched dual mode.

Copley, John A. (Rte. 11, Box 1022, Fredericksburg, VA 22405); Kwok, Hoi S. (214 Bonner Hall, SUNY-Buffalo, Buffalo, NY 14260); Domankevitz, Yacov (214 Bonner Hall, SUNY-Buffalo, Buffalo, NY 14260)

1989-09-26T23:59:59.000Z

386

The detrimental effects of salinity on rooting of coleus cuttings and their alleviation with gypsum  

E-Print Network [OSTI]

. The effect of NaC1 on root number and color intensity of the foliage were not altered by the addition of CaSO . The beneficial effects of CaS04 cou1d not be demonstrated in a peat-styrafoam medium. Acknowledgements I would like to express my sincere... Ca/Na ratios for the NaC1:Ca504 solutions 5 Electrical conductivities (E. C. ) of 2 KNO solutions with i ncreasing CaS04 concent/ations 6 The effects of pH and peat extract on rooting of 'Big Red' cuttings . Page 13 15 44 45 56 LIST...

Janssen, Antonius Hendrick

1981-01-01T23:59:59.000Z

387

Chatter prediction from orthogonal cutting force data and stability analysis of peripheral end milling  

E-Print Network [OSTI]

in high-speed machining were discussed in Smith and Tlusty (1997), and Koren (1997) reviewed the progress in machine tool control over the last three decades. Nayfeh et al. (1997) used a nonlinear single degree of freedom model and applied perturbation... OF ENGINEERING FOR INDUSTRY, Aug. 1977, pp. 585-590. Delio, T. , Tlusty, J. , and Smith, S. , 1992, "Use of Audio Signals for Chatter Detection and Control, " ASME JOURNAL OF ENGINEERING FOR INDUSTRY, vol. 114, pp. 146-157. Dempster, S. , 1911, "Cutting Tools...

Arumugam, Arunkumar

2000-01-01T23:59:59.000Z

388

New Working Fluids Cut a Wider Swath of Geothermal Reserves | Department of  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy HealthCommentsAugustNationalMarketsMillion DOEEnergy Working Fluids Cut

389

Cuttings Analysis At New River Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable Solutions LLC JumpCrow Lake Wind JumpCuttings Analysis At New River Area (DOE

390

Cuttings Analysis At U.S. South Region (Smith & Dees, 1982) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable Solutions LLC JumpCrow Lake Wind JumpCuttings Analysis At NewInformation

391

Beyond Silicon: Cutting the Costs of Solar Power | U.S. DOE Office of Science (SC)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScienceCareers Apply for a JobBernardtheBeyond Silicon: Cutting the

392

ARRA Proposed Award: The Moderate Income Sustainable Technology (MIST) Program  

E-Print Network [OSTI]

: 30 Rural County Regional Coalition of Rural Members including Alpine, Amador, Butte, Calaveras, and Tuolumne and Yuba; 19 Associate County Members including Alameda, Contra Costa, Fresno, Humboldt, Kern, Kings, Mendocino, Monterey, Riverside, Sacramento, San Bernardino, San Joaquin, Solano, Sonoma

393

Last Modified: 20Oct10 ARRA CONTRACT AWARD  

E-Print Network [OSTI]

Partnering Workforce Training Programs: Fresno Regional Workforce Investment Board Fresno County Economic energy efficiency retrofits in the Fresno and Kern county region. The FRCRR Program will provide no-cost efficiency to a home. To ensure program success, FRCRR will collaborate with local workforce investment

394

Microsoft Word - ARRA_Weekly_11-10-09  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

her professional career, Queen was ready to trade her lab coat for a hard hat and work boots. "I wanted to get some experience away from the lab," said Queen, who began working at...

395

Hybrid Cooling for Geothermal Power Plants: Final ARRA Project...  

Office of Scientific and Technical Information (OSTI)

(NREL) at www.nrel.govpublications. Executive Summary Many binary-cycle geothermal power plants use air as the heat rejection medium. An air-cooled condenser (ACC) system is...

396

AVTA: ARRA EV Project Electric Grid Impact Report  

Broader source: Energy.gov [DOE]

The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following report describes lessons learned about the impact on the electrical grid from the EV Project. The EV Project partnered with city, regional and state governments, utilities, and other organizations in 16 cities to deploy about 14,000 Level 2 PEV chargers and 300 DC fast chargers. It also deployed 5,700 all-electric Nissan Leafs and 2,600 plug-in hybrid electric Chevrolet Volts. This research was conducted by Idaho National Laboratory.

397

06-08-2010 ARRA-10-0146  

Broader source: Energy.gov (indexed) [DOE]

or equipment, environmental quality maintained B1.25 - Transfer, disposition, or acquisition of uncontaminated land for habitat preservationwildlife management B1.26 - Siting...

398

04-06-2010 ARRA-10-0162  

Broader source: Energy.gov (indexed) [DOE]

or equipment, environmental quality maintained B1.25 - Transfer, disposition, or acquisition of uncontaminated land for habitat preservationwildlife management B1.26 - Siting...

399

06-14-2010 ARRA-10-0185  

Broader source: Energy.gov (indexed) [DOE]

or equipment, environmental quality maintained B1.25 - Transfer, disposition, or acquisition of uncontaminated land for habitat preservationwildlife management B1.26 - Siting...

400

09-01-2010 ARRA-10-0300  

Broader source: Energy.gov (indexed) [DOE]

or equipment, environmental quality maintained B1.25 - Transfer, disposition, or acquisition of uncontaminated land for habitat preservationwildlife management B1.26 - Siting...

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Progress on ARRA-funded Facility & Capability Upgrades for the...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

More Documents & Publications Vehicle Technologies Office Merit Review 2014: Battery Safety Testing CX-004097: Categorical Exclusion Determination 2011 Annual Merit...

402

Microsoft Word - ARRA_05-30-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

over and a 124 fine. Since 2007, Washington State has had a law prohibiting hand-held cell phone use while driving, but you could not be pulled over for only that reason....

403

AVTA: ARRA EV Project Residential Charging Infrastructure Maps  

Broader source: Energy.gov [DOE]

The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following maps describe where the EV Project deployed thousands of residential chargers.

404

AVTA: ARRA EV Project Charging Infrastructure Data Summary Reports  

Broader source: Energy.gov [DOE]

The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following reports summarize data collected from the 14,000 Level 2 PEV chargers and 300 DC fast chargers deployed by the EV Project. It also deployed 5,700 all-electric Nissan Leafs and 2,600 plug-in hybrid electric Chevrolet Volts.

405

AVTA: ARRA EV Project Public Charging Infrastructure Maps  

Broader source: Energy.gov [DOE]

The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following maps describe where the EV Project deployed thousands of public chargers.

406

AVTA: ARRA EV Project Nissan Leaf Data Summary Reports  

Broader source: Energy.gov [DOE]

The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following reports provide summary overviews of the 5,700 all-electric Nissan Leafs deployed through the EV Project. It also deployed about 14,000 Level 2 PEV chargers and 300 DC fast chargers. Background data on how this data was collected is in the EV Project: About the Reports. This research was conducted by Idaho National Laboratory.

407

AVTA: Chevrolet Volt ARRA Vehicle Demonstration Project Data  

Broader source: Energy.gov [DOE]

The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following reports summarize data collected from a project General Motors conducted to deploy 150 2011 Chevrolet Volts around the country. This research was conducted by Idaho National Laboratory.

408

AVTA: ARRA EV Project Chevrolet Volt Data Summary Reports  

Broader source: Energy.gov [DOE]

The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The American Recovery and Reinvestment Act supported a number of projects that together made up the largest ever deployment of plug-in electric vehicles and charging infrastructure in the U.S. The following reports provide summary overviews of the 2,600 plug-in hybrid electric Chevrolet Volts deployed through the EV Project. It also deployed about 14,000 Level 2 PEV chargers and 300 DC fast chargers. Background data on how this data was collected is in the EV Project: About the Reports. This research was conducted by Idaho National Laboratory.

409

Progress on ARRA-funded Facility & Capability Upgrades for the...  

Broader source: Energy.gov (indexed) [DOE]

Equipment: Maccor Battery Tester 4200 An Oklahoma Company 16 channels Remote cell sensors 5V, 10A Formation cycling Test cycling Complex load...

410

ARRA Homes Weatherized by Grantee | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2,341 4,481 Virgin Islands 311 311 Virginia** 7,104 9,132 Washington 12,335 16,018 West Virginia 3,710 6,190 Wisconsin 21,684 30,588 Wyoming 1,012 1,189 TOTAL 612,390...

411

Microsoft Word - ARRA_03-28-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

have been collected for 56 cone penetrometers in the trench area and 154 in the vertical pipe unit (VPU) area. The 618-10 Burial Ground consists of 23 trenches and 94 VPUs, which...

412

Microsoft Word - ARRA_04-04-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

have been collected for 70 cone penetrometers in the trench area and 154 in the vertical pipe unit (VPU) area. The 618-10 Burial Ground consists of 23 trenches grouped into six...

413

Microsoft Word - ARRA_03-21-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and fuel development facilities. Waste was dumped into 23 trenches and 94 vertical pipe units, or VPUs, which were constructed by welding five bottomless drums together and...

414

Microsoft Word - ARRA_02-14-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

continue at the 618-10 Burial Ground. To date, 77 cone penetrometers in the vertical pipe unit (VPU) area and three cone penetrometers in the trenches have been characterized....

415

Microsoft Word - ARRA_04-11-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

have been collected for 80 cone penetrometers in the trench area and 166 in the vertical pipe unit (VPU) area. The 618-10 Burial Ground consists of 23 trenches grouped into six...

416

Microsoft Word - ARRA_05-09-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for 80 of 100 cone penetrometers in the trench area and 320 of 376 in the vertical pipe unit (VPU) area. The 618-10 Burial Ground operated from 1954 to 1963 and received...

417

Microsoft Word - ARRA_Weekly_10-27-09  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to view the video showing a demonstration of technology to locate the center point of buried vertical pipe units and excavation progress at ERDF super cell 9. Profile Page 10...

418

Microsoft Word - ARRA_01-31-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

penetrometer. Cone penetrometers are narrow steel cylinders that were installed around buried, vertical pipes containing radioactive materials. The vertical pipe units (VPUs)...

419

Microsoft Word - ARRA_02-21-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

continue at the 618-10 Burial Ground. To date, 95 cone penetrometers in the vertical pipe unit (VPU) area and three cone penetrometers in the trenches have been characterized....

420

Microsoft Word - ARRA_03-07-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

continue at the 618-10 Burial Ground. To date, 148 cone penetrometers in the vertical pipe unit (VPU) area and 4 cone penetrometers in the trenches have been characterized....

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Microsoft Word - ARRA_04-18-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

have been collected for 80 cone penetrometers in the trench area and 206 in the vertical pipe unit (VPU) area. The 618-10 Burial Ground operated from 1954 to 1963 and received...

422

Microsoft Word - ARRA_02-07-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

resumed. Cone penetrometers are narrow steel cylinders that were installed around buried, vertical pipes containing radioactive materials. The vertical pipe units (VPUs)...

423

Microsoft Word - ARRA_04-25-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and 94 VPUs. The VPUs were constructed by welding five bottomless drums together and buried vertically about 10 feet apart. WCH is obtaining radiological characterization data...

424

Microsoft Word - ARRA_02-28-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

continue at the 618-10 Burial Ground. To date, 124 cone penetrometers in the vertical pipe unit (VPU) area and three cone penetrometers in the trenches have been characterized....

425

Microsoft Word - ARRA_05-02-10.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

have been collected for 80 cone penetrometers in the trench area and 295 in the vertical pipe unit (VPU) area. The 618-10 Burial Ground operated from 1954 to 1963 and received...

426

Microsoft Word - ARRA_05-16-20.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

cone penetrometers in the trench area and 344 of 376 cone penetrometers in the vertical pipe unit (VPU) area. The 618-10 Burial Ground operated from 1954 to 1963 and received...

427

arra femp technical: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

is published Erdem, Erkut 29 Technical Brief CiteSeer Summary: ii iiiFOREWARD The Depleted Uranium Technical Brief is designed to convey available information and knowledge about...

428

Microsoft Word - ARRA INVESTMENT RELEASE REVISED FINAL Aug 2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

WIPP USES RECOVERY ACT FUNDING TO REDUCE NUCLEAR WASTE FOOTPRINT CARLSBAD, N.M., August 2, 2011 - The U.S. Department of Energy's (DOE's) Carlsbad Field Office (CBFO) reduced the...

429

Environmental Management American Recovery & Reinvestment Act (ARRA)  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005DepartmentDecember U.S. Department of Energy Advisory Board Charter

430

POLICY GUIDANCE MEMORANDUM #01 Documenting Hires Funded by ARRA (Expired) |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F SSales LLCDieselEnergyHistory May 3,3, 2013Department of

431

ORISE: Supporting ARRA funded cleanup activities in Oak Ridge, Tenn.  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory |CHEMPACKRadiological programStandards development For 30StayORISE

432

Section 1512 Reporting Requirements under ARRA | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the Gridwise Global1WasteRecoveryAwards Secretary'sSING)Award ofContinuing512

433

Section 1605 Buy American Provision under ARRA | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the Gridwise Global1WasteRecoveryAwards Secretary'sSING)Award ofContinuing512605

434

Project_Descriptions_ITP_ARRA_Awards.xls | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket |21,-CommitteeItemsHiTek

435

Sandia National Laboratories: Working with Sandia: Stimulus Spending (ARRA  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest RegionatSearch WelcomeScienceProgramsSANDCurrent

436

Data Collection & Analysis for ARRA Fuel Cell Projects (Presentation)  

SciTech Connect (OSTI)

The data analysis objectives are: (1) Independent assessment of technology, focused on fuel cell system and hydrogen infrastructure:performance, operation, and safety; (2) Leverage data processing and analysis capabilities from the fuel cell vehicle Learning Demonstration project and DoD Forklift Demo; (3) Establish a baseline of real-world fuel cell operation and maintenance data and identify technical/market barriers; (4) Support market growth of fuel cell technologies by reporting on technology features relevant to the business case; and (5) Report on technology to fuel cell and hydrogen communities and stakeholders.

Kurtz, J.; Ramsden, T.; Wipke, K.; Sprik, S.

2009-08-21T23:59:59.000Z

437

ARRA870A Recovery Act - Recip Details for Next Quarter  

Broader source: Energy.gov (indexed) [DOE]

23387,81.128,,"applicationvnd.ms-excel",,8900,8900,"89-0331","applicationvnd.ms-excel" "CHEMETALL FOOTE CORP","EE0003300","Grant",28425258,6946269.89,6419611.25,2004490,"Battery...

438

Microsoft Word - ARRA small business 031510r1.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Suite, 200 Lexington, Kentucky 40513 NEWS MEDIA CONTACT: FOR IMMEDIATE RELEASE: Loretta Averna, U.S. DOE Public Affairs March 15, 2010 (859) 219-4010 Sandy Childers, LATAParallax...

439

Microsoft Word - ARRA_Weekly_11-03-09  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

penetrometers are steel tubes that will house the instruments used to determine the type, amount, and distribution of radioactive materials within the waste trenches and...

440

Navy's Geothermal Program Office: Overview of Recovery Act (ARRA) Funded  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's HeatMexico: EnergyMithunCenter Jump to: navigation,Navajo TribalNavyNavy

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Idaho Cleanup Project grows its workforce to complete ARRA work  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun withconfinementEtching. | EMSLtheIndustry | Department ofT.IanIdahoIdaho

442

EM ARRA Best Practices and Lessons Learned Workshop: Oak Ridge  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy CooperationRequirementsDraft Environmental Impact

443

04-06-2010 ARRA-10-0162  

National Nuclear Security Administration (NNSA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 Sandia National Laboratories/New Mexico or

444

05-19-2010 ARRA-10-0238  

National Nuclear Security Administration (NNSA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 Sandia National Laboratories/New5-05-2010 or

445

06-08-2010 ARRA-10-0146  

National Nuclear Security Administration (NNSA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 Sandia National

446

06-14-2010 ARRA-10-0185  

National Nuclear Security Administration (NNSA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 Sandia National00 Sandia National81 or

447

07-09-2010 ARRA-10-0180  

National Nuclear Security Administration (NNSA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 Sandia National00 Sandia National810873 0634

448

09-01-2010 ARRA-10-0300  

National Nuclear Security Administration (NNSA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 Sandia National00 Sandia or8-26-20109-01-2010

449

The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment of Energy TechnicalFlow RoomTexas(EAP) Bulletin,(EAP)(EAP)

450

The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof theRestoration atStandardsAnalysisofTexas schoolEnergy The(EAP)

451

The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof theRestoration atStandardsAnalysisofTexas schoolEnergy

452

The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof theRestoration atStandardsAnalysisofTexas schoolEnergy(EAP)

453

The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof theRestoration atStandardsAnalysisofTexas schoolEnergy(EAP)(EAP)

454

The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof theRestoration atStandardsAnalysisofTexas

455

The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof theRestoration atStandardsAnalysisofTexas(EAP) Bulletin, January 4,

456

The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof theRestoration atStandardsAnalysisofTexas(EAP) Bulletin, January

457

The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof theRestoration atStandardsAnalysisofTexas(EAP) Bulletin, January(EAP)

458

The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof theRestoration atStandardsAnalysisofTexas(EAP) Bulletin,

459

The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof theRestoration atStandardsAnalysisofTexas(EAP) Bulletin,(EAP)

460

The American Recovery and Reinvestment Act (ARRA) Energy Assurance Planning  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof theRestoration atStandardsAnalysisofTexas(EAP) Bulletin,(EAP)(EAP)

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

SEP/ARRA Evaluation Webinar | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists' Research |Regulation Services2014 Update |Department of EnergyVeryDepartment

462

Hybrid Cooling for Geothermal Power Plants: Final ARRA Project Report  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: Crystal structureComposite--FORRemarksHEATING DISTRIBUTIONSHistory

463

Title XVII-Innovative Technology Loan Guarantee Program under ARRA |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment of EnergyThe Sun and ItsXVII Incentives for

464

Microsoft Word - 2014 ARRA Training Centers - Intro.docx  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMappingENVIRONMENTAL IMPACT STATEMENT COMMENT SUMMARY I-5ProgramRegional

465

Microsoft Word - ARRA INVESTMENT RELEASE REVISED FINAL Aug 2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMappingENVIRONMENTAL IMPACT STATEMENTbelow).A New GrooveHEALTH77WIPP USES

466

Microsoft Word - Carlsbad ARRA Office Release-Final-1 _2_  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMappingENVIRONMENTAL IMPACTApproved:GEORGE W. CRABTREEDOE CARLSBAD FIELD

467

Microsoft Word - HABAdv #232_ARRA_Funding.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challenge fundProject8 -

468

American Recovery & Reinvestment Act, ARRA, clean energy projects, energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartment ofEnergy Natural Gas:Austin, TMOAB, Utah - Moving 2.4Continued3

469

ARRA NEWS UPDATE_2-26-10.indd  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)Productssondeadjustsondeadjust DocumentationARMStreamsUS DepartmentARM'sARPES Provides 2 *Ac 89

470

ARRA NEWS UPDATE_3-12-10.indd  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)Productssondeadjustsondeadjust DocumentationARMStreamsUS DepartmentARM'sARPES Provides 2 *Ac 8912, 2010

471

ARRA NEWS UPDATE_3-26-10.indd  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)Productssondeadjustsondeadjust DocumentationARMStreamsUS DepartmentARM'sARPES Provides 2 *Ac 8912,

472

ARRA NEWS UPDATE_3-5-10.indd  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)Productssondeadjustsondeadjust DocumentationARMStreamsUS DepartmentARM'sARPES Provides 2 *Ac 8912,5, 2010

473

ARRA NEWS UPDATE_4-23-10.indd  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)Productssondeadjustsondeadjust DocumentationARMStreamsUS DepartmentARM'sARPES Provides 2 *Ac 8912,5,

474

ARRA NEWS UPDATE_5-1-10.indd  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)Productssondeadjustsondeadjust DocumentationARMStreamsUS DepartmentARM'sARPES Provides 2 *Ac 8912,5,30,

475

ARRA NEWS UPDATE_7-30-10.indd  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)Productssondeadjustsondeadjust DocumentationARMStreamsUS DepartmentARM'sARPES Provides 2 *Ac

476

ARRA 1% Energy Loans As of 5/5/2010  

E-Print Network [OSTI]

campus lighting systems, install more efficient motors, add tankless water heaters and replace of Hillsborough $908,700 Install premium efficiency pumps and control upgrades in the town's water system. 9 Services District $165,100 Upgrade old, inefficient water pumps at Grant Ramey Pump Station. $24

477

ARRA Proposed Award: The Affordable Multifamily Retrofit Initiative (the Initiative)  

E-Print Network [OSTI]

Star appliance replacement; air conditioner and/or furnace replacement or installation defect repair; cool roofs

478

The thermoregulatory function of thatched nests in the South American grass-cutting ant, Acromyrmex heyeri  

E-Print Network [OSTI]

The construction of mound-shaped nests by ants is considered as a behavioral adaptation to low environmental temperatures, i.e., colonies achieve higher and more stables temperatures than those of the environment. Besides the well-known nests of boreal Formica wood-ants, several species of South American leaf-cutting ants of the genus Acromyrmex construct thatched nests. Acromyrmex workers import plant fragments as building material, and arrange them so as to form a thatch covering a central chamber, where the fungus garden is located. Thus, the degree of thermoregulation attained by the fungus garden inside the thatched nest largely depends on how the thatch affects the thermal relations between the fungus and the environment. This work was aimed at studying the thermoregulatory function of the thatched nests built by the grass-cutting ant Acromyrmex heyeri Forel (Hymenoptera: Formicidae: Myrmicinae). Nest and environmental temperatures were measured as a function of solar radiation on the long-term. The thermal diffusivity of the nest thatch was measured and compared to that of the surrounding soil, in order to assess the influence of the building material on the nests thermoregulatory ability. The results showed that the average core temperature of thatched nests was higher than that of the

Martin Bollazzi A; Flavio Roces B

479

Frictional heating and convective cooling of polycrystalline diamond drag tools during rock cutting  

SciTech Connect (OSTI)

A numerical-analytical model is developed to predict temperatures in stud-mounted polycrystalline diamond compact (PDC) drag tools during rock cutting. Experimental measurements of the convective heat transfer coefficient for PDC cutters are used in the model to predict temperatures under typical drilling conditions with fluid flow. The analysis compares favorably with measurements of frictional temperatures in controlled cutting tests on Tennessee marble. It is shown that mean cutter wearflat temperatures can be maintained below the critical value of 750{sup 0}C only under conditions of low friction at the cutter/rock interface. This is true, regardless of the level of convective cooling. In fact, a cooling limit is established above which increases in convective cooling do not further reduce cutter temperatures. The ability of liquid drilling fluids to reduce interface friction is thus shown to be far more important in preventing excessive temperatures than their ability to provide cutter cooling. Due to the relatively high interface friction developed under typical air drilling conditions, it is doubtful that temperatures can be kept subcritical at high rotary speeds in some formations when air is employed as the drilling fluid, regardless of the level of cooling achieved.

Ortega, A.; Glowka, D.A.

1982-01-01T23:59:59.000Z

480

Using Hydro-Cutting to Aid in Remediation of a Firing Range Contaminated with Depleted Uranium  

SciTech Connect (OSTI)

This paper describes the challenges encountered in decommissioning a firing range that had been used to test fire depleted uranium rounds in the late 1950's and early 1960's. The paper details the operational challenges and innovative solutions involved in remediating and decommissioning a firing range bullet catcher once unexploded ordnance was discovered. It also discusses how the Army dealt with an intertwining web of regulatory and permit issues that arose in treating and disposing of multiple waste streams. The paper will show how the use of a Resource Conservation and Recovery Act (RCRA) Temporary Authorization allowed the Army to deal with the treatment of a variety of waste streams and how hydro-cutting process was used to demilitarize the potentially unexploded rounds.

Styvaert, Michael S.; Conley, Richard D.; Watters, David J.

2003-02-24T23:59:59.000Z

Note: This page contains sample records for the topic "arra spreadsheet cuttings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Simultaneous laser cutting and welding of metal foil to edge of a plate  

DOE Patents [OSTI]

A method of welding an ultra-thin foil to the edge of a thicker sheet to form a vacuum insulation panel comprising the steps of providing an ultra-thin foil having a thickness less than 0.002, providing a top plate having an edge and a bottom plate having an edge, clamping the foil to the edge of the plate wherein the clamps act as heat sinks to distribute heat through the foil, providing a laser, moving the laser relative to the foil and the plate edges to form overlapping weld beads to weld the foil to the plate edges while simultaneously cutting the foil along the weld line formed by the overlapping beads.

Pernicka, John C. (Fort Collins, CO); Benson, David K. (Golden, CO); Tracy, C. Edwin (Golden, CO)

1996-01-01T23:59:59.000Z

482

Simultaneous laser cutting and welding of metal foil to edge of a plate  

DOE Patents [OSTI]

A method is described for welding an ultra-thin foil to the edge of a thicker sheet to form a vacuum insulation panel comprising the steps of providing an ultra-thin foil having a thickness less than 0.002, providing a top plate having an edge and a bottom plate having an edge, clamping the foil to the edge of the plate wherein the clamps act as heat sinks to distribute heat through the foil, providing a laser, moving the laser relative to the foil and the plate edges to form overlapping weld beads to weld the foil to the plate edges while simultaneously cutting the foil along the weld line formed by the overlapping beads. 7 figs.

Pernicka, J.C.; Benson, D.K.; Tracy, C.E.

1996-03-19T23:59:59.000Z

483

The influence of phenylacetic acid, ethephon, and cytokinin on the rooting of slash pine cuttings  

E-Print Network [OSTI]

20 Table 3. Analysis of variance table to determine the effect of phenyl- acetic acid on the rooting of slash pine cuttings. Source df Expected Mean Squares R (Reps) C (Clones) T (Treatments) RxC RxT CxT 21 21 a + SaRC + 32aR 2 2 2 2 2 2... a + SaRC + 32aC. 2 2 2 a + 4aCT + 4aRT + 164T 2 2 RC 2 2 ' '4'RT 2 2 a + 4a(T Error 63 21 squares were calculated us1ng the equation L = (a1NS1 2MS2 + . . . + akNSk) with a. as constants. The degrees of freedom associated with L were 1...

Hankins, Margaret Wendel

1983-01-01T23:59:59.000Z

484

Studies of the frictional heating of polycrystalline diamond compact drag tools during rock cutting  

SciTech Connect (OSTI)

A numerical-analytical model is developed to analyze temperatures in polycrystalline diamond compact (PDC) drag tools subject to localized frictional heating at a worn flat area and convective cooling at exposed lateral surfaces. Experimental measurements of convective heat transfer coefficients of PDC cutters in a uniform crossflow are presented and used in the model to predict temperatures under typical drilling conditions with fluid flow. The analysis compares favorably with measurements of frictional temperatures in controlled cutting tests on Tennessee marble. It is found that average temperatures at the wearflat contact zone vary directly with frictional force per unit area and are proportional to the one-half power of the cutting speed at the velocities investigated. Temperatures are found to be much more sensitive to decreases in the dynamic friction by lubrication than to increases in convective cooling rates beyond currently achievable levels with water or drilling fluids. It is shown that use of weighted drilling fluids may actually decrease cooling rates compared to those achieved with pure water. It is doubtful that tool temperatures can be kept below critical levels (750/sup 0/C) if air is employed as the drilling fluid. The degree of tool wear is found to have a major influence on the thermal response of the friction contact zone, so that for equal heating per contact area, a worn tool will run much hotter than a sharp tool. It is concluded that tool temperatures may be kept below critical levels with conventional water or mud cooling as long as the fluid provides good cutter-rock lubrication.

Ortega, A.; Glowka, D.A.

1982-06-01T23:59:59.000Z

485

Hydroshear Simulation Lab Test 2  

SciTech Connect (OSTI)

This data file is for test 2. In this test a sample of granite with a pre cut (man made fracture) is confined, heated and differential stress is applied. max temperature in this this system development test is 95C. test details on the spreadsheets--note thta there are 2 spreadsheets

Bauer, Steve

2014-08-01T23:59:59.000Z

486

Hydroshear Simulation Lab Test 2  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

This data file is for test 2. In this test a sample of granite with a pre cut (man made fracture) is confined, heated and differential stress is applied. max temperature in this this system development test is 95C. test details on the spreadsheets--note thta there are 2 spreadsheets

Bauer, Steve

487

Energy Office Grant Helps the Virgin Islands Environmental Resource Station Install Solar Panels, Improve Efficiency, and Cut Monthly Energy Use Nearly 30% (Fact Sheet)  

SciTech Connect (OSTI)

This fact sheet highlights the energy challenges faced by the Virgin Islands Environmental Resource Station (VIERS), the renewable energy and energy efficiency solutions implemented, the resulting energy efficiency savings, and other project benefits. In 2011, VIERS installed a 9.4 kW solar system funded by a $50,000 American Recovery and Reinvestment Act (ARRA) grant, which was administered by VIEO. To identify additional energy-saving opportunities, VIERS performed an energy audit of appliances, which resulted in the removal of two water coolers and the installation of a water meter to monitor water use and how it relates to electric pump use. VIERS also added an educational component to the project, developing a solar classroom near the original solar system. By building on previous energy conservation measures and making additional investments in renewable energy technology, VIERS has lowered its average monthly energy consumption nearly 30%, even with an increase in guests. The VIERS efforts are not limited to the technology installations, however. They also serve to impact the youth of the U.S. Virgin Islands (USVI) by educating young people about energy efficiency and renewable energy technologies and their energy and environmental impacts. VIERS solar system is connected to the Web via a live feed that posts solar output data in real time, increasing the VIERS solar classroom's potential educational impact exponentially.

Not Available

2012-03-01T23:59:59.000Z

488

Hanford Information Related to the American Recovery and Reinvestment...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Recovery Act of 2009 Recovery Act of 2009 Recovery Act of 2009 Hanford ARRA FAQ Hanford ARRA Weekly Reports Hanford ARRA News Hanford ARRA Photogallery Hanford ARRA Videos Hanford...

489

IMPACT OF BOUNDARY-LAYER CUTTING AND FLOW CONDITIONING ON FREE-SURFACE BEHAVIOR IN TURBULENT LIQUID SHEETS  

E-Print Network [OSTI]

IMPACT OF BOUNDARY-LAYER CUTTING AND FLOW CONDITIONING ON FREE-SURFACE BEHAVIOR IN TURBULENT LIQUID dimension) = 1 cm into ambient air are compared with empirical correlations at a nearly prototypical term, for a well- conditioned jet but is not a substitute for well-designed flow conditioning. I

California at San Diego, University of

490

Colonization, clear-cutting, and cornfields: Rural migration and deforestation in The Sierra de Lacandn National Park, Petn, Guatemala  

E-Print Network [OSTI]

1 Colonization, clear-cutting, and cornfields: Rural migration and deforestation in The Sierra de variability in the amount of forest cleared in the sample. While the high deforestation group cleared an average of 13.6 hectares, or 49% of their forest during the time period, the low deforestation group

Lopez-Carr, David

491

EUROGRAPHICS 2010 / H. P. A. Lensch and S. Seipel Short Paper Ray Tracing using Hierarchies of Slab Cut Balls  

E-Print Network [OSTI]

hierarchy (BVH) [KK86, WBS07, DHK07]. This paper presents an initial study on ray tracing using an enclosing shape called the Slab Cut Ball (SCB) in the BVH. An SCB is the intersection volume of the space between utilized recently in collision detection with promis- ing results [LAM09]. The main advantages of the SCB

Larsson, Thomas

492

Improving the microbiological quality and safety of fresh-cut tomatoes by low dose electron beam irradiation  

E-Print Network [OSTI]

in response to irradiation treatment. This study indicates that doses of irradiation greater than 1 kGy should be used in fresh-cut tomatoes to eliminate significant populations of pathogens, as well as to ensure the microbial quality of the product...

Schmidt, Heather Martin

2005-11-01T23:59:59.000Z

493

ORNL/TM-2002/120 Cross-Cutting Studies and State-of-the-Practice Reviews  

E-Print Network [OSTI]

ORNL/TM-2002/120 Cross-Cutting Studies and State-of-the-Practice Reviews: Archive and Use of ITS-Generated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 5.1 STATE-OF-THE-PRACTICE REVIEW SAFETY APPLICATIONS 6.1 STATE-OF-THE-PRACTICE REVIEW

494

Development of an Alginate-based Antimicrobial Edible Coating to Extend the Shelf-life of Fresh-cut Pineapple  

E-Print Network [OSTI]

In the last few years, especially in the developed countries, an increment in demand for fresh-cut fruit by the consumers of all ages has occurred. This increase is mainly due to the importance that people are giving to the consumption of fresh...

Mantilla, Natalia

2012-07-16T23:59:59.000Z

495

Customer satisfaction for beef: home-use tests and objective measures to evaluate three retail cuts at different quality levels  

E-Print Network [OSTI]

, participated in a six-week home-use test of the three cuts and four quality grade levels completing a questionnaire for each steak evaluated. Trained sensory panel and Wamer-Bratzler shear force determination (WBS) provided objective measures for each subprimal...

Neely, Tracey Renee

2012-06-07T23:59:59.000Z

496

Gasification advanced research and technology development (AR and TD) cross-cut meeting and review. [US DOE supported  

SciTech Connect (OSTI)

The US Department of Energy gasification advanced research and technology development (AR and TD) cross-cut meeting and review was held June 24 to 26, 1981, at Germantown, Maryland. Forty-eight papers from the proceedings have been entered individually into EDB and ERA. (LTN)

Not Available

1981-01-01T23:59:59.000Z

497

Evolution of organic matter indicators in response to major environmental changes: The case of a formerly cut-over peat bog (Le Russey, Jura Mountains, France)  

E-Print Network [OSTI]

of a formerly cut-over peat bog (Le Russey, Jura Mountains, France) Laure Comont, Fatima Laggoun-Dfarge, Jean To assess whether the biochemical characteristics of peat can provide clues for past ecosystem changes monosaccharide determination of peat organic matter (OM) and the dominant living plants from a formerly cut

Paris-Sud XI, Universit de

498

Diagnosing GRB Prompt Emission Site with Spectral Cut-Off Energy  

E-Print Network [OSTI]

The site and mechanism of gamma-ray burst (GRB) prompt emission is still unknown. Although internal shocks have been widely discussed as the emission site of GRBs, evidence supporting other emission sites have been also suggested recently, including the closer-in photosphere where the fireball becomes transparent and further-out radii near the fireball deceleration radius where magnetic dissipation may be important. With the successful operation of the GLAST experiment, prompt high energy emission spectra from many GRBs would be detected in the near future. We suggest that the cut-off energy of the prompt emission spectrum from a GRB depends on both the fireball bulk Lorentz factor and the unknown emission radius from the central engine. If the bulk Lorentz factor could be independently measured (e.g. from early afterglow observations), the observed spectral cutoff energy can be used to diagnose the emission site of gamma-rays. This would provide valuable information to understand the physical origin of the GRB promp emission.

Nayantara Gupta; Bing Zhang

2007-10-15T23:59:59.000Z

499

Herbivorous insect response to group selection cutting in a southeastern bottomland hardwood forest.  

SciTech Connect (OSTI)

ABSTRACT Malaise and pitfall traps were used to sample herbivorous insects in canopy gaps created by group-selection cutting in a bottomland hardwood forest in South Carolina. The traps were placed at the centers, edges, and in the forest adjacent to gaps of different sizes (0.13, 0.26, and 0.50 ha) and ages (1 and 7 yr old) during four sampling periods in 2001. Overall, the abundance and species richness of insect herbivores were greater at the centers of young gaps than at the edge of young gaps or in the forest surrounding young gaps. There were no differences in abundance or species richness among old gap locations (i.e., centers, edges, and forest), and we collected significantly more insects in young gaps than old gaps. The insect communities in old gaps were more similar to the forests surrounding them than young gap communities were to their respective forest locations, but the insect communities in the two forests locations (surrounding young and old gaps) had the highest percent similarity of all. Although both abundance and richness increased in the centers of young gaps with increasing gap size, these differences were not significant.Weattribute the increased numbers of herbivorous insects to the greater abundance of herbaceous plants available in young gaps.

Michael D. Ulyshen; James L. Hanula; Scott Horn; Christopher E. Moorman.

2005-04-01T23:59:59.000Z

500

Proceedings of the Efficient Separations and Processing Cross-Cutting Program Annual Technical Exchange Meeting  

SciTech Connect (OSTI)

This document contains summaries of technology development presented at the 1995 Efficient Separations and Processing Cross-Cutting Program (ESP) Annual Technical Exchange Meeting. The ESP is sponsored by the US Department of Energy`s Office of Environmental Management (EM), Office of Technology Development. The meeting is held annually to promote a free exchange of ideas among technology developers, potential users (for example, EM focus areas), and other interested parties within EM. During this meeting, developers of ESP-funded technologies describe the problems and needs addressed by their technologies; the technical approach, accomplishments, and resolution of issues; the strategy and schedule for commercialization; and evolving potential applications. Presenters are asked to address the following areas: Target waste management problem, waste stream, or data need; scientific background and technical approach; technical accomplishments and resolution of technical issues; schedule and strategy for commercializing and implementing the technology or acquiring needed data; potential alternate applications of the technology or data, including outside of DOE/EM. The meeting is not a program review of the individual tasks or subtasks; but instead focuses on the technical aspects and implementation of ESP-sponsored technology or data. The meeting is also attended by members of the ESP Technical Review Team, who have the opportunity at that time to review the ESP as a whole.

NONE

1995-02-01T23:59:59.000Z