National Library of Energy BETA

Sample records for arch environ contam

  1. Contam airflow models of three large buildings: Model descriptions and validation

    SciTech Connect (OSTI)

    Black, Douglas R.; Price, Phillip N.

    2009-09-30

    Airflow and pollutant transport models are useful for several reasons, including protection from or response to biological terrorism. In recent years they have been used for deciding how many biological agent samplers are needed in a given building to detect the release of an agent; to figure out where those samplers should be located; to predict the number of people at risk in the event of a release of a given size and location; to devise response strategies in the event of a release; to determine optimal trade-offs between sampler characteristics (such as detection limit and response time); and so on. For some of these purposes it is necessary to model a specific building of interest: if you are trying to determine optimal sampling locations, you must have a model of your building and not some different building. But for many purposes generic or 'prototypical' building models would suffice. For example, for determining trade-offs between sampler characteristics, results from one building will carry over other, similar buildings. Prototypical building models are also useful for comparing or testing different algorithms or computational pproaches: different researchers can use the same models, thus allowing direct comparison of results in a way that is not otherwise possible. This document discusses prototypical building models developed by the Airflow and Pollutant Transport Group at Lawrence Berkeley National Laboratory. The models are implemented in the Contam v2.4c modeling program, available from the National Institutes for Standards and Technology. We present Contam airflow models of three virtual buildings: a convention center, an airport terminal, and a multi-story office building. All of the models are based to some extent on specific real buildings. Our goal is to produce models that are realistic, in terms of approximate magnitudes, directions, and speeds of airflow and pollutant transport. The three models vary substantially in detail. The airport model

  2. ArchRock Corporation | Open Energy Information

    Open Energy Info (EERE)

    Arch Rock is a systems and software company that builds products and technology for wireless sensor networks. References: ArchRock Corporation1 This article is a stub. You can...

  3. Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Video News Room News Releases Environment newsroomassetsimagesenvi-icon.png Earth, Environment Climate impacts, including global temperatures, drought and forest fires ...

  4. Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment Environment Events Learn about our science, listen to lectures on environment and climate change at the Bradbury Science Museum or at Cafe Scientific events in your community. Oct 14 Wed 4:00 PM Laboratory's Electronic Public Reading room training J. Robert Oppenheimer Study Center, Room JRO 1&2 - West Jemez Road at Casa Grande The Department of Energy (DOE) and the Los Alamos National Security, LLC (LANS), are holding training on the contents and use of the Los Alamos National

  5. Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment Environment A repository for images showing environmental cleanup and protection efforts around the Lab. News Releases Science Briefs Photos Picture of the Week Publications Social Media Videos Fact Sheets PHOTOS BY TOPIC Careers Community Visitors Environment History Science The Lab Click thumbnails to enlarge. Photos arranged by most recent first, horizontal formats before vertical. See Flickr for more sizes and details. Workers sample contents of LANL's Material Disposal Area B

  6. Estimating the seismic stability of the arch dam in the Chirkeiskaya hydrosystem

    SciTech Connect (OSTI)

    Khrapkov, A. A.; Skomorovskaya, E. Ya

    2004-11-15

    A calculation analysis of the arch dam constructed in an area with standardized seismicity of magnitude 9-10 is presented.

  7. Environment Videos

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment Videos Environment

  8. The seismic response of concrete arch bridges (with focus on the Bixby Creek bridge Carmel, California)

    SciTech Connect (OSTI)

    Hoehler, M; McCallen, D; Noble, C

    1999-06-01

    The analysis, and subsequent retrofit, of concrete arch bridges during recent years has relied heavily on the use of computational simulation. For seismic analysis in particular, computer simulation, typically utilizing linear approximations of structural behavior, has become standard practice. This report presents the results of a comprehensive study of the significance of model sophistication (i.e. linear vs. nonlinear) and pertinent modeling assumptions on the dynamic response of concrete arch bridges. The study uses the Bixby Creek Bridge, located in California, as a case study. In addition to presenting general recommendations for analysis of this class of structures, this report provides an independent evaluation of the proposed seismic retrofit for the Bixby Creek Bridge. Results from the study clearly illustrate a reduction of displacement drifts and redistribution of member forces brought on by the inclusion of material nonlinearity. The analyses demonstrate that accurate modeling of expansion joints, for the Bixby Creek Bridge in particular, is critical to achieve representative modal and transient behavior. The inclusion of near-field displacement pulses in ground motion records was shown to significantly increase demand on the relatively softer, longer period Bixby Creek Bridge arch. Stiffer, shorter period arches, however, are more likely susceptible to variable support motions arising from the canyon topography typical for this class of bridges.

  9. Operation Hardtack. Project 3. 2. Response of earth-confined flexible-arch structures in high-overpressure regions

    SciTech Connect (OSTI)

    LeDoux, J.C.; Rush, P.J.

    1985-09-01

    The purpose of this project was to determine structural responses and failure criteria of earth-confined corrugated-steel flexible arches subjected to high overpressure blast loading from nuclear detonations. A flexible arch is considered as an arch structure whose ultimate supporting capacity is dependent upon confinement within a surrounding earth configuration. A collateral objective was to determine the radiation-shielding effectiveness of such structures with a minimum cover of five feet of coral sand. Because the soil and ground-water conditions at Eniwetok did not permit the placing of the steel arches below natural-grade level, the structures were confined within massive non-drag sensitive earthwork configurations of coral sand. Empirical determinations were made of the responses of (1) three earth-confined prefabricated corrugated-steel flexible arches when subjected to relatively long-duration blast loadings from a megaton range detonation; and (2) one similar earth-confined flexible-arch when subjected to relatively short-duration blast loadings from a kiloton-range detonation.

  10. Influence of Transcontinental arch on Cretaceous listric-normal faulting, west flank, Denver basin

    SciTech Connect (OSTI)

    Davis, T.L.

    1983-08-01

    Seismic studies along the west flank of the Denver basin near Boulder and Greeley, Colorado illustrate the interrelationship between shallow listric-normal faulting in the Cretaceous and deeper basement-controlled faulting. Deeper fault systems, primarily associated with the Transcontinental arch, control the styles and causative mechanisms of listric-normal faulting that developed in the Cretaceous. Three major stratigraphic levels of listric-normal faulting occur in the Boulder-Greeley area. These tectonic sensitive intervals are present in the following Cretaceous formations: Laramie-Fox Hills-upper Pierre, middle Pierre Hygiene zone, and the Niobrara-Carlile-Greenhorn. Documentation of the listric-normal fault style reveals a Wattenberg high, a horst block or positive feature of the greater Transcontinental arch, was active in the east Boulder-Greeley area during Cretaceous time. Paleotectonic events associated with the Wattenberg high are traced through analysis of the listric-normal fault systems that occur in the area. These styles are important to recognize because of their stratigraphic and structural influence on Cretaceous petroleum reservoir systems in the Denver basin. Similar styles of listric-normal faulting occur in the Cretaceous in many Rocky Mountain foreland basins.

  11. Early Pennsylvanian wrenching along the Red River-Matador Arch: Formation of a pull-apart basin, Depocenter for Atokan to Lower Des Moines (bend) clastics, Cottle County, Texas

    SciTech Connect (OSTI)

    Stephens, W.C. Jr.; Gunn, R.D.

    1995-06-01

    Early Pennsylvanian wrenching along the Red River-Matador Arch (Tectonic Zone) created a braided series of en echelon faults and folds with associated pop-up structures and pull-apart basins. Local extension, or overstepping, in Southeast Cottle County, Texas, has produced the deepest pull-apart basin along the arch with over 10,000` of structural relief. The emerging Wichita-Amarillo Uplift, to the north, provided an abundant sediment source, which prograded rapidly southward as an alluvial fan-braided river complex. Exposure of basement rocks and lower Paleozoic sediments along the Red River-Matador Arch, also contributed to the basin fill. Syntectonic sedimentation led to the accumulation of over 6000` of Bend (Atoka-lower Des Moines) sediments within the basin. Deposition was dominated initially by alluvial fan to fluvial siliciclastics. As basin subsidence was further amplified by sediment loading, accommodation exceeded sedimentation capturing a large segment of the southward prograding Wichita-Amarillo derived clastic wedge. Encroachment of the late Atoka to lower Des Moines epeiric sea promoted further evolution of depositional environments to fan deltas, marine dominated clastics and, later, localized carbonate development. Type III kerogen rich organic shales produced abundant gas prone source rocks. The extreme depth of the basin combined with the local geothermal gradient provided for significant hydrocarbon generation. By early 1988 new well control helped revise previous stratigraphic correlation demonstrating a rapidly expanding lower Des Moines to Atokan section. The drilling of the Gunn Oil Company-Brothers No. 1 to a total depth of 10,301` in the Mississippian Chappel Limestone, encountered 2025` of Bend sediments, with 279` of gross Bend Conglomerate (162` of net pay). The Brothers No. 1 was potentialled on 11/19/89 with a CAOF of 6.0 MMCFD and filed as the field discovery for the Broken Bone (Bend Conglomerate) field.

  12. Prostate Brachytherapy With Oblique Needles to Treat Large Glands and Overcome Pubic Arch Interference

    SciTech Connect (OSTI)

    Ryu, Bon; Imaging Research Laboratories, Robarts Research Institute, University of Western Ontario, London, Ontario ; Bax, Jeff; Imaging Research Laboratories, Robarts Research Institute, University of Western Ontario, London, Ontario ; Edirisinge, Chandima; Lewis, Craig; Chen, Jeff; D'Souza, David; Radiation Treatment Program, London Regional Cancer Program, London Health Sciences Centre, London, Ontario ; Fenster, Aaron; Department of Medical Biophysics, University of Western Ontario, London, Ontario; Department of Biomedical Engineering, University of Western Ontario, London, Ontario; Imaging Research Laboratories, Robarts Research Institute, University of Western Ontario, London, Ontario; Department of Oncology, University of Western Ontario, London, Ontario ; Wong, Eugene; Department of Medical Biophysics, University of Western Ontario, London, Ontario; Department of Oncology, University of Western Ontario, London, Ontario

    2012-08-01

    Purpose: First, to show that low-dose-rate prostate brachytherapy plans using oblique needle trajectories are more successful than parallel trajectories for large prostates with pubic arch interference (PAI); second, to test the accuracy of delivering an oblique plan by using a three-dimensional (3D) transrectal ultrasonography (TRUS)-guided mechatronic system. Methods and Materials: Prostates were contoured for 5 subjects' 3D TRUS images showing a maximum PAI of {<=}1 cm and a prostate volume of <50 cc. Two planning studies were done. First, prostate contours were artificially enlarged to 45 to 80 cc in 5- to 10-cc increments for a single subject. Second, all subject prostate contours were enlarged to 60 cc. For each study, three types of plans were manually created for comparison: a parallel needle template (PT) plan, a parallel needle no-template (PNT) plan, and an oblique needle no-template (OBL) plan. Needle positions and angles were not discretized for nontemplate plans. European Society for Therapeutic Radiology and Oncology dose-volume histogram guidelines, iodine-125 (145-Gy prescription, 0.43 U), and needle angles of <15 Degree-Sign were used. An OBL plan was delivered to a pubic arch containing a 60-cc prostate phantom that mimicked the anatomy of the subject with the greatest PAI (23% by volume). Results: In the increasing-prostate volume study, OBL plans were successful for prostates of {<=}80 cc, and PT plans were successful for prostates of <65 cc. In paired, one-sided t tests for the 60-cc volume study, OBL plans showed dosimetric improvements for all organs compared to both of the parallel type plans (p < 0.05); PNT plans showed a benefit only in planning target volumes receiving more than 100 Gy compared to PT plans. A computed tomography scan of the phantom showed submillimeter seed placement accuracy in all directions. Conclusion: OBL plans were significantly better than parallel plans, and an OBL plan was accurately delivered to a 60-cc

  13. SIMULATION FRAMEWORK FOR REGIONAL GEOLOGIC CO{sub 2} STORAGE ALONG ARCHES PROVINCE OF MIDWESTERN UNITED STATES

    SciTech Connect (OSTI)

    Sminchak, Joel

    2012-09-30

    This report presents final technical results for the project Simulation Framework for Regional Geologic CO{sub 2} Storage Infrastructure along Arches Province of the Midwest United States. The Arches Simulation project was a three year effort designed to develop a simulation framework for regional geologic carbon dioxide (CO{sub 2}) storage infrastructure along the Arches Province through development of a geologic model and advanced reservoir simulations of large-scale CO{sub 2} storage. The project included five major technical tasks: (1) compilation of geologic, hydraulic and injection data on Mount Simon, (2) development of model framework and parameters, (3) preliminary variable density flow simulations, (4) multi-phase model runs of regional storage scenarios, and (5) implications for regional storage feasibility. The Arches Province is an informal region in northeastern Indiana, northern Kentucky, western Ohio, and southern Michigan where sedimentary rock formations form broad arch and platform structures. In the province, the Mount Simon sandstone is an appealing deep saline formation for CO{sub 2} storage because of the intersection of reservoir thickness and permeability. Many CO{sub 2} sources are located in proximity to the Arches Province, and the area is adjacent to coal fired power plants along the Ohio River Valley corridor. Geophysical well logs, rock samples, drilling logs, and geotechnical tests were evaluated for a 500,000 km{sup 2} study area centered on the Arches Province. Hydraulic parameters and historical operational information was also compiled from Mount Simon wastewater injection wells in the region. This information was integrated into a geocellular model that depicts the parameters and conditions in a numerical array. The geologic and hydraulic data were integrated into a three-dimensional grid of porosity and permeability, which are key parameters regarding fluid flow and pressure buildup due to CO{sub 2} injection. Permeability data

  14. SIMULATION FRAMEWORK FOR REGIONAL GEOLOGIC CO{sub 2} STORAGE ALONG ARCHES PROVINCE OF MIDWESTERN UNITED STATES

    SciTech Connect (OSTI)

    Sminchak, Joel

    2012-09-30

    This report presents final technical results for the project Simulation Framework for Regional Geologic CO{sub 2} Storage Infrastructure along Arches Province of the Midwest United States. The Arches Simulation project was a three year effort designed to develop a simulation framework for regional geologic carbon dioxide (CO{sub 2}) storage infrastructure along the Arches Province through development of a geologic model and advanced reservoir simulations of large-scale CO{sub 2} storage. The project included five major technical tasks: (1) compilation of geologic, hydraulic and injection data on Mount Simon, (2) development of model framework and parameters, (3) preliminary variable density flow simulations, (4) multi-phase model runs of regional storage scenarios, and (5) implications for regional storage feasibility. The Arches Province is an informal region in northeastern Indiana, northern Kentucky, western Ohio, and southern Michigan where sedimentary rock formations form broad arch and platform structures. In the province, the Mount Simon sandstone is an appealing deep saline formation for CO{sub 2} storage because of the intersection of reservoir thickness and permeability. Many CO{sub 2} sources are located in proximity to the Arches Province, and the area is adjacent to coal fired power plants along the Ohio River Valley corridor. Geophysical well logs, rock samples, drilling logs, and geotechnical tests were evaluated for a 500,000 km{sup 2} study area centered on the Arches Province. Hydraulic parameters and historical operational information was also compiled from Mount Simon wastewater injection wells in the region. This information was integrated into a geocellular model that depicts the parameters and conditions in a numerical array. The geologic and hydraulic data were integrated into a three-dimensional grid of porosity and permeability, which are key parameters regarding fluid flow and pressure buildup due to CO{sub 2} injection. Permeability data

  15. Variable Density Flow Modeling for Simulation Framework for Regional Geologic CO{sub 2} Storage Along Arches Province of Midwestern United States

    SciTech Connect (OSTI)

    Joel Sminchak

    2011-09-30

    The Arches Province in the Midwestern U.S. has been identified as a major area for carbon dioxide (CO{sub 2}) storage applications because of the intersection of Mt. Simon sandstone reservoir thickness and permeability. To better understand large-scale CO{sub 2} storage infrastructure requirements in the Arches Province, variable density scoping level modeling was completed. Three main tasks were completed for the variable density modeling: Single-phase, variable density groundwater flow modeling; Scoping level multi-phase simulations; and Preliminary basin-scale multi-phase simulations. The variable density modeling task was successful in evaluating appropriate input data for the Arches Province numerical simulations. Data from the geocellular model developed earlier in the project were translated into preliminary numerical models. These models were calibrated to observed conditions in the Mt. Simon, suggesting a suitable geologic depiction of the system. The initial models were used to assess boundary conditions, calibrate to reservoir conditions, examine grid dimensions, evaluate upscaling items, and develop regional storage field scenarios. The task also provided practical information on items related to CO{sub 2} storage applications in the Arches Province such as pressure buildup estimates, well spacing limitations, and injection field arrangements. The Arches Simulation project is a three-year effort and part of the United States Department of Energy (U.S. DOE)/National Energy Technology Laboratory (NETL) program on innovative and advanced technologies and protocols for monitoring/verification/accounting (MVA), simulation, and risk assessment of CO{sub 2} sequestration in geologic formations. The overall objective of the project is to develop a simulation framework for regional geologic CO{sub 2} storage infrastructure along the Arches Province of the Midwestern U.S.

  16. User Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Environment Environment on Genepool When you log into the Genepool system you will land in your $HOME directory on NERSC's "global homes" file system. The global homes file system is mounted across all NERSC computation systems with the exception of PDSF. The $HOME directory has quota of 40GB and 1,000,000 inodes. To customize your environment, by setting environment variables or aliases, you will need to modify one of the "dot" files that NERSC has created for you. You

  17. Uinta Arch Project: investigations of uranium potential in Precambrian X and older metasedimentary rocks in the Unita and Wasatch ranges, Utah and Colorado

    SciTech Connect (OSTI)

    Graff, P.J.; Sears, J.W.; Holden, G.S.

    1980-06-01

    This study is part of the United States Department of Energy's National Uranium Resource Evaluation Program to understand the geologic setting, amount, and availability of uranium resources within the boundaries of the United States. The systematic study of Precambrian quartz-pebble conglomerates and areas that may contain such conglomerates is an integral part of DOE's resource evaluation program, because deposits of world-wide importance occur in such terrains in Canada and South Africa, and because terrains similar to those producing uranium from quartz-pebble conglomerates exist elsewhere in the United States. Because of the ready availability of Tertiary sandstone and Colorado Plateau-type uranium deposits, large areas of Precambrian rocks in the US have not been fully assessed for uranium potential. Thus, the Uinta Arch Project was undertaken to assess the favorability of Precambrian metasedimentary rocks in northern Utah for deposits of uranium in Precambrian quartz-pebble conglomerates. Rocks of interest to this study are the thick, clastic sequences within the Uinta Arch that are considered to be of Early Proterozoic age. The Uinta Arch area is known to contain rocks which generally fit the lithologic characteristics that are understood to limit the occurrence of Precambrian fossil placers. However, detailed geology of these rocks and their exact fit to the model described for uraniferous conglomerates was not known. The primary goal of the Uinta Arch Project was to determine how well these Precambrian rocks resemble known deposits and to describe the favorability of placer uranium deposits.

  18. Devonian oil in Mississippian and Mesozoic reservoirs-unconformity controls on migration and accumulation, Sweetgrass Arch, Montana

    SciTech Connect (OSTI)

    Dolson, J.; Piombino, J. ); Franklin, M. ); Harwood, R. )

    1993-10-01

    Lower Cretaceous and Mississippian strata of the Sweetgrass Arch of western Montana have produced over 300 MMBO, primarily from three large combination traps. Gas chromatography-mass spectrometry (GC-MS) data suggest a Devonian/Mississippian Bakken Formation oil source. Most thermally mature Bakken strata are located at least 60 mi (90 km) to the west in the footwall to the thrust belt. Hydrocarbons have migrated vertically through fractures in the Mississippian Madison Group to regional seals in Jurassic shales. Lateral migration occurs predominately within the Jurassic subcrop of the Mississippian Sun River Dolomite. Permeability barriers, paleohills, subtle structures and possible hydrodynamic modification along the migration pathway account for most of the Sun River production. A lack of effective bottom seals generally prevents these subtle traps from developing large accumulations in areas of steep structural dip. The pre-Cretaceous unconformity, which underlies the Lower Cretaceous Cutbank sandstone, bevels across this Mississippian migration route downplunge in Canada, diverting oils southward to the giant Cutbank field accumulation. Alluvial plain and fan sandstones west of the field have sheet-like geometries and appear to have poor lateral seals. Most of the Cutbank accumulation occurs where valley incisement of a north-south trending paleodrainage system juxtaposes these sheet sandstones updip against Jurassic Rierdon and Sawtooth shales, forming a valley wall trap. Additional minor Jurassic and Lower Cretaceous production occurs updip from leak points created by poor lateral seals adjacent the pre-Cretaceous unconformity. These interpretations provide new insight into field distributions throughout the Sweetgrass Arch. 37 refs., 26 figs., 1 tab.

  19. Conceptual Model Summary Report Simulation Framework for Regional Geologic CO{sub 2} Storage Along Arches Province of Midwestern United States

    SciTech Connect (OSTI)

    2011-06-30

    A conceptual model was developed for the Arches Province that integrates geologic and hydrologic information on the Eau Claire and Mt. Simon formations into a geocellular model. The conceptual model describes the geologic setting, stratigraphy, geologic structures, hydrologic features, and distribution of key hydraulic parameters. The conceptual model is focused on the Mt. Simon sandstone and Eau Claire formations. The geocellular model depicts the parameters and conditions in a numerical array that may be imported into the numerical simulations of carbon dioxide (CO{sub 2}) storage. Geophysical well logs, rock samples, drilling logs, geotechnical test results, and reservoir tests were evaluated for a 500,000 km{sup 2} study area centered on the Arches Province. The geologic and hydraulic data were integrated into a three-dimensional (3D) grid of porosity and permeability, which are key parameters regarding fluid flow and pressure buildup due to CO{sub 2} injection. Permeability data were corrected in locations where reservoir tests have been performed in Mt. Simon injection wells. The final geocellular model covers an area of 600 km by 600 km centered on the Arches Province. The geocellular model includes a total of 24,500,000 cells representing estimated porosity and permeability distribution. CO{sub 2} injection scenarios were developed for on-site and regional injection fields at rates of 70 to 140 million metric tons per year.

  20. Arche Type X

    Energy Savers [EERE]

    Optical Design The Evolution of Outdoor Optical Systems Multifaceted Reflector TIR Optics Reliable | Electrical | Solutions 7 Status Quo Reliable | Electrical | Solutions Task...

  1. REP&V TO ATTNJF: NE-23 SUWECC Commercial Facilities Used by National...

    Office of Legacy Management (LM)

    ... MATERIAL INVOLVED Test Quantities of Contam- inated Material Dther than Metal rest Quantities of Contam- inated Material Dther than Metal Test quantities of Contam- ...

  2. STATEOFNEWMEXICO ENVIRONMENT DEPARTMENT ENVIRONMENTAL HEALTH...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    STATEOFNEWMEXICO ENVIRONMENT DEPARTMENT ENVIRONMENTAL HEALTH DIVISION, HAZARDOUS WASTE ... OF NEW MEXICO BEFORE THE SECRETARY OF ENVIRONMENT NEW MEXICO ENVIRONMENT DEPARTMENT, ...

  3. Environment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Environment Environment Environment The U. S. Department of Energy (DOE) complies with all applicable environmental laws and regulations and establishes its own environmental requirements to ensure workers, the public, and the environment is protected from hazards associated with all Department operations. DOE provides assistance to the field to implement these policies, works in resolving environmental protection issues, and provides feedback to enhance environmental performance throughout the

  4. Computing environment logbook

    DOE Patents [OSTI]

    Osbourn, Gordon C; Bouchard, Ann M

    2012-09-18

    A computing environment logbook logs events occurring within a computing environment. The events are displayed as a history of past events within the logbook of the computing environment. The logbook provides search functionality to search through the history of past events to find one or more selected past events, and further, enables an undo of the one or more selected past events.

  5. Modules Software Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment » Modules Environment Modules Software Environment NERSC uses the module utility to manage nearly all software. There are two huge advantages of the module approach: NERSC can provide many different versions and/or installations of a single software package on a given machine, including a default version as well as several older and newer versions; and Users can easily switch to different versions or installations without having to explicitly specify different paths. With modules,

  6. XML Engineering Environment

    Energy Science and Technology Software Center (OSTI)

    2006-07-27

    The XML Engineering Environment is a reconfigurable software system that allows users to translate, enhance and route data from sources to sinks.

  7. STAR Test Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    STAR Test Environment STAR Test Environment These instructions describe how to set up the STAR environment independent of the production environment in order to test different installations in $OPTSTAR and $GROUP_DIR. If you want to modify those installations you will need access to the starofl account. Bypass STAR envionment login Edit your ~/.pdsf_setup file changing the STAR_LINUX_SETUP to "use_none" and start a new session. You should not see all the STAR environmental variables

  8. Building Informatics Environment

    Energy Science and Technology Software Center (OSTI)

    2008-06-02

    The Building Informatics Environment is a modeling environment based on the Modelica language. The environment allows users to create a computer model of a building and its energy systems with various time scales and physical resolutions. The environment can be used for rapid development of, e.g., demand controls algorithms, new HVAC system solutions and new operational strategies (controls, fault detection and diagnostics). Models for building energy and control systems are made available in the environment.more » The models can be used as provided, or they can be changed and/or linked with each other in order to model the effects that a particular user is interested in.« less

  9. NERSC User Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment NERSC User Environment Home Directories, Shells and Dotfiles All NERSC systems use global home directories, which are are pre-populated with shell initialization files (also known as dotfiles) for all available shells. NERSC fully supports bash, csh, and tcsh as login shells. Other shells (ksh, sh, and zsh) are also available. The default shell at NERSC is csh. Dotfiles The "standard" dotfiles are symbolic links to read-only files that NERSC controls. For each standard

  10. Environment Feature Stories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information Administration (EIA) Power Plant Environmental International Emissions All Environment Data Reports Analysis & Projections All Reports ‹ environment State Carbon Dioxide Emissions Data for: 2013 | Release Date: October 26, 2015 | Next Release Date: October 2016 Summary By fuel By energy sectors State methodology State analysis Additional Tables Coal Commercial Electric Industrial Natural gas Petroleum Residential Transportation States Format Alabama Alaska Arizona Arkansas

  11. Environment | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment Glossary › FAQS › Overview Data Summary Electric power plant environmental International emissions All environment data reports Analysis & Projections Major Topics Most popular Carbon/greenhouse gas emissions International Other environmental issues Projections Recurring All reports Browse by Tag Alphabetical Frequency Tag Cloud Current Issues & Trends See more › Energy-related CO2 emissions from natural gas surpass coal as fuel use patterns change natural

  12. Geoscience/Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Geoscience/Environment Geoscience/Environment Print From the high pressures at the Earth's core to the vacuum of outer space, the ALS has tools for investigating samples from either environmental extreme. "Geoscience" at the ALS covers a wide range of topics, from carbon sequestration and air quality to cometary composition and the formation of the solar system. To narrow the focus a bit, the ALS has an important role to play in addressing a number of environmental issues, including

  13. Environment scattering in GADRAS.

    SciTech Connect (OSTI)

    Thoreson, Gregory G.; Mitchell, Dean James; Theisen, Lisa Anne; Harding, Lee T.

    2013-09-01

    Radiation transport calculations were performed to compute the angular tallies for scattered gamma-rays as a function of distance, height, and environment. Green's Functions were then used to encapsulate the results a reusable transformation function. The calculations represent the transport of photons throughout scattering surfaces that surround sources and detectors, such as the ground and walls. Utilization of these calculations in GADRAS (Gamma Detector Response and Analysis Software) enables accurate computation of environmental scattering for a variety of environments and source configurations. This capability, which agrees well with numerous experimental benchmark measurements, is now deployed with GADRAS Version 18.2 as the basis for the computation of scattered radiation.

  14. Risk Analysis Virtual ENvironment

    Energy Science and Technology Software Center (OSTI)

    2014-02-10

    RAVEN has 3 major functionalities: 1. Provides a Graphical User Interface for the pre- and post-processing of the RELAP-7 input and output. 2. Provides the capability to model nuclear power plants control logic for the RELAP-7 code and dynamic control of the accident scenario evolution. This capability is based on a software structure that realizes a direct connection between the RELAP-7 solver engine (MOOSE) and a python environment where the variables describing the plant statusmore » are accessible in a scripting environment. RAVEN support the generation of the probabilistic scenario control by supplying a wide range of probability and cumulative distribution functions and their inverse functions. 3. Provides a general environment to perform probability risk analysis for RELAP-7, RELAP-5 and any generic MOOSE based applications. The probabilistic analysis is performed by sampling the input space of the coupled code parameters and it is enhanced by using modern artificial intelligence algorithms that accelerate the identification of the areas of major risk (in the input parameter space). This environment also provides a graphical visualization capability to analyze the outcomes. Among other approaches, the classical Monte Carlo and Latin Hypercube sampling algorithms are available. For the acceleration of the convergence of the sampling methodologies, Support Vector Machines, Bayesian regression, and collocation stochastic polynomials chaos are implemented. The same methodologies here described could be used to solve optimization and uncertainties propagation problems using the RAVEN framework.« less

  15. Risk Analysis Virtual ENvironment

    SciTech Connect (OSTI)

    2014-02-10

    RAVEN has 3 major functionalities: 1. Provides a Graphical User Interface for the pre- and post-processing of the RELAP-7 input and output. 2. Provides the capability to model nuclear power plants control logic for the RELAP-7 code and dynamic control of the accident scenario evolution. This capability is based on a software structure that realizes a direct connection between the RELAP-7 solver engine (MOOSE) and a python environment where the variables describing the plant status are accessible in a scripting environment. RAVEN support the generation of the probabilistic scenario control by supplying a wide range of probability and cumulative distribution functions and their inverse functions. 3. Provides a general environment to perform probability risk analysis for RELAP-7, RELAP-5 and any generic MOOSE based applications. The probabilistic analysis is performed by sampling the input space of the coupled code parameters and it is enhanced by using modern artificial intelligence algorithms that accelerate the identification of the areas of major risk (in the input parameter space). This environment also provides a graphical visualization capability to analyze the outcomes. Among other approaches, the classical Monte Carlo and Latin Hypercube sampling algorithms are available. For the acceleration of the convergence of the sampling methodologies, Support Vector Machines, Bayesian regression, and collocation stochastic polynomials chaos are implemented. The same methodologies here described could be used to solve optimization and uncertainties propagation problems using the RAVEN framework.

  16. Multiprocessor programming environment

    SciTech Connect (OSTI)

    Smith, M.B.; Fornaro, R.

    1988-12-01

    Programming tools and techniques have been well developed for traditional uniprocessor computer systems. The focus of this research project is on the development of a programming environment for a high speed real time heterogeneous multiprocessor system, with special emphasis on languages and compilers. The new tools and techniques will allow a smooth transition for programmers with experience only on single processor systems.

  17. Interconnection Coordination with Environment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Interconnection Coordination with Environment John Steward Topics * Interconnection Types - Large Generator Interconnect Procedures (LGIP) * Interconnection Queue - UGP * OATT Revision * Transmission Service Issues * Open Discussion - Thoughts on coordination. Interconnection Types * Generators - Small Generator Interconnection Procedures (under 20MW) - Large Generator Interconnection Procedures (over 20MW) * Load - General Requirements for Interconnection * Transmission Large Generator

  18. Environment/Health/Safety Concerns

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EHS Emergencies Report AccidentIncident Stop Work Policy Environment, Health & Safety Concerns hardhat Environment Health Safety Concerns construction workers If you have a...

  19. Ariane Environment | Open Energy Information

    Open Energy Info (EERE)

    Ariane Environment Jump to: navigation, search Name: Ariane Environment Place: London, United Kingdom Zip: W8 6JL Product: String representation "Ariane Environm ... onmental...

  20. Securing collaborative environments

    SciTech Connect (OSTI)

    Agarwal, Deborah; Jackson, Keith; Thompson, Mary

    2002-05-16

    The diverse set of organizations and software components involved in a typical collaboratory make providing a seamless security solution difficult. In addition, the users need support for a broad range of frequency and locations for access to the collaboratory. A collaboratory security solution needs to be robust enough to ensure that valid participants are not denied access because of its failure. There are many tools that can be applied to the task of securing collaborative environments and these include public key infrastructure, secure sockets layer, Kerberos, virtual and real private networks, grid security infrastructure, and username/password. A combination of these mechanisms can provide effective secure collaboration capabilities. In this paper, we discuss the requirements of typical collaboratories and some proposals for applying various security mechanisms to collaborative environments.

  1. Geoscience/Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Geoscience/Environment Print From the high pressures at the Earth's core to the vacuum of outer space, the ALS has tools for investigating samples from either environmental extreme. "Geoscience" at the ALS covers a wide range of topics, from carbon sequestration and air quality to cometary composition and the formation of the solar system. To narrow the focus a bit, the ALS has an important role to play in addressing a number of environmental issues, including environmental

  2. Extreme Environments (EFree) Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Extreme Environments (EFree ) Center LLNL Co-PI: Jonathon Crowhurst [e-mail] [bio] Novel materials for energy applications Ultrafast reflectivity measurements under high pressure Transient reflectivity of BaFe2As2 at the indicated pressures in neon. In this experiment we measure pump-driven ultrafast reflectivity changes in order to infer the time scale of electron phonon coupling, and help to assess its role and importance in new superconducting systems. We believe this is the first time such

  3. Environment control system

    DOE Patents [OSTI]

    Sammarone, Dino G.

    1978-01-01

    A system for controlling the environment of an enclosed area in nuclear reactor installations. The system permits the changing of the environment from nitrogen to air, or from air to nitrogen, without the release of any radioactivity or process gas to the outside atmosphere. In changing from a nitrogen to an air environment, oxygen is inserted into the enclosed area at the same rate which the nitrogen-oxygen gas mixture is removed from the enclosed area. The nitrogen-oxygen gas mixture removed from the enclosed area is mixed with hydrogen, the hydrogen recombining with the oxygen present in the gas to form water. The water is then removed from the system and, if it contains any radioactive products, can be utilized to form concrete, which can then be transferred to a licensed burial site. The process gas is purified further by stripping it of carbon dioxide and then distilling it to remove any xenon, krypton, and other fission or non-condensable gases. The pure nitrogen is stored as either a cryogenic liquid or a gas. In changing from an air to nitrogen environment, the gas is removed from the enclosed area, mixed with hydrogen to remove the oxygen present, dried, passed through adsorption beds to remove any fission gases, and reinserted into the enclosed area. Additionally, the nitrogen stored during the nitrogen to air change, is inserted into the enclosed area, the nitrogen from both sources being inserted into the enclosed area at the same rate as the removal of the gas from the containment area. As designed, the amount of nitrogen stored during the nitrogen to air change substantially equals that required to replace oxygen removed during an air to nitrogen change.

  4. (Managing the global environment)

    SciTech Connect (OSTI)

    Rayner, S.F.

    1989-10-03

    The conference was stimulated by concern that policy makers increasingly have to make environmental management decisions in the absence of solidly established scientific consensus about ecological processes and the consequences of human actions. Often, as in the case of climate change, some decisions may have to be made in the absence of information that is desirable but may not be available for years to come, if ever. Six topics were identified as running throughout the Congress. These were: the epistemology and history of the sciences or disciplines concerned with the environment, including the scientific basis of rationality and modes of dealing with uncertainty and complexity; the social, economic, and institutional conditions for the production of knowledge bearing on the environment, including the politics of research and the improvement of scientific data; the structuring and institutionalization of expert assessments on national and international levels, including the global distribution of expertise; the means of establishing scientific information, the role of the media in transmitting and processing knowledge about the environment, and the organization of public environmental debate; and decision making and management under conditions of uncertainty; and, finally the relationship between science and ethics. 13 refs.

  5. Extensible Computational Chemistry Environment

    Energy Science and Technology Software Center (OSTI)

    2012-08-09

    ECCE provides a sophisticated graphical user interface, scientific visualization tools, and the underlying data management framework enabling scientists to efficiently set up calculations and store, retrieve, and analyze the rapidly growing volumes of data produced by computational chemistry studies. ECCE was conceived as part of the Environmental Molecular Sciences Laboratory construction to solve the problem of researchers being able to effectively utilize complex computational chemistry codes and massively parallel high performance compute resources. Bringing themore » power of these codes and resources to the desktops of researcher and thus enabling world class research without users needing a detailed understanding of the inner workings of either the theoretical codes or the supercomputers needed to run them was a grand challenge problem in the original version of the EMSL. ECCE allows collaboration among researchers using a web-based data repository where the inputs and results for all calculations done within ECCE are organized. ECCE is a first of kind end-to-end problem solving environment for all phases of computational chemistry research: setting up calculations with sophisticated GUI and direct manipulation visualization tools, submitting and monitoring calculations on remote high performance supercomputers without having to be familiar with the details of using these compute resources, and performing results visualization and analysis including creating publication quality images. ECCE is a suite of tightly integrated applications that are employed as the user moves through the modeling process.« less

  6. Fast neutron environments.

    SciTech Connect (OSTI)

    Buchheit, Thomas Edward; Kotula, Paul Gabriel; Lu, Ping; Brewer, Luke N.; Goods, Steven Howard; Foiles, Stephen Martin; Puskar, Joseph David; Hattar, Khalid Mikhiel; Doyle, Barney Lee; Boyce, Brad Lee; Clark, Blythe G.

    2011-10-01

    The goal of this LDRD project is to develop a rapid first-order experimental procedure for the testing of advanced cladding materials that may be considered for generation IV nuclear reactors. In order to investigate this, a technique was developed to expose the coupons of potential materials to high displacement damage at elevated temperatures to simulate the neutron environment expected in Generation IV reactors. This was completed through a high temperature high-energy heavy-ion implantation. The mechanical properties of the ion irradiated region were tested by either micropillar compression or nanoindentation to determine the local properties, as a function of the implantation dose and exposure temperature. In order to directly compare the microstructural evolution and property degradation from the accelerated testing and classical neutron testing, 316L, 409, and 420 stainless steels were tested. In addition, two sets of diffusion couples from 316L and HT9 stainless steels with various refractory metals. This study has shown that if the ion irradiation size scale is taken into consideration when developing and analyzing the mechanical property data, significant insight into the structural properties of the potential cladding materials can be gained in about a week.

  7. Environment Ohio | Open Energy Information

    Open Energy Info (EERE)

    Environment Ohio Address: 203 E. Broad Street, Suite 3 Place: Columbus, Ohio Zip: 43215 Website: www.environmentohio.org References: http:www.environmentohio.org This article...

  8. Alaska Forum on the Environment

    Broader source: Energy.gov [DOE]

    The Alaska Forum on the Environment (AFE) is Alaska's largest statewide gathering of environmental professionals from government agencies, non-profit and for-profit businesses, community leaders,...

  9. Setting Up Your User Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Setting Up Your User Environment Setting Up Your User Environment PDSF Defined Environment When new users are added to the PDSF machines, the login shell is set according to the user's request. You can choose between csh, tcsh, or bash. You can change your startup shell by logging into NIM. Paths and environment variables are controlled by startup files (also known as dot files). On PDSF the startup files are symbolic links to read-only files that NERSC controls (if they are not, see the

  10. Colombia Ministry of Environment | Open Energy Information

    Open Energy Info (EERE)

    Colombia Ministry of Environment Jump to: navigation, search Logo: Colombia Ministry of Environment Name: Colombia Ministry of Environment Address: Calle 37 No. 8-40 - Bogot,...

  11. Wireless Environment LLC | Open Energy Information

    Open Energy Info (EERE)

    Wireless Environment LLC Jump to: navigation, search Name: Wireless Environment LLC Place: Elyria, Ohio Product: Wireless Environment designs light-emitting diode lighting products...

  12. Westminster Energy Environment Transport Forum | Open Energy...

    Open Energy Info (EERE)

    Westminster Energy Environment Transport Forum Jump to: navigation, search Name: Westminster Energy, Environment & Transport Forum Place: United Kingdom Product: String...

  13. Denver University - International Institute for Environment and...

    Open Energy Info (EERE)

    - International Institute for Environment and Enterprise Name: Denver University - International Institute for Environment and Enterprise Address: 2199 S. University Blvd....

  14. DPC materials and corrosion environments.

    SciTech Connect (OSTI)

    Ilgen, Anastasia Gennadyevna; Bryan, Charles R.; Teich-McGoldrick, Stephanie; Hardin, Ernest; Clarity, J.

    2014-10-01

    After an exposition of the materials used in DPCs and the factors controlling material corrosion in disposal environments, a survey is given of the corrosion rates, mechanisms, and products for commonly used stainless steels. Research needs are then identified for predicting stability of DPC materials in disposal environments. Stainless steel corrosion rates may be low enough to sustain DPC basket structural integrity for performance periods of as long as 10,000 years, especially in reducing conditions. Uncertainties include basket component design, disposal environment conditions, and the in-package chemical environment including any localized effects from radiolysis. Prospective disposal overpack materials exist for most disposal environments, including both corrosion allowance and corrosion resistant materials. Whereas the behavior of corrosion allowance materials is understood for a wide range of corrosion environments, demonstrating corrosion resistance could be more technically challenging and require environment-specific testing. A preliminary screening of the existing inventory of DPCs and other types of canisters is described, according to the type of closure, whether they can be readily transported, and what types of materials are used in basket construction.

  15. Aging and the geochemical environment

    SciTech Connect (OSTI)

    Not Available

    1981-01-01

    This report describes and assesses the aging process and related environmental aspects that may provide useful insights toward postponing some of the inevitable effects of aging. Although the Panel on Aging and the Geochemical Environment is convinced that the geochemical environment is associated with aging, it of course recognizes that other factors may also be significant or, perhaps, more important. Accordingly, the report is intended to enhance the awareness of biomedical and geochemical research scientists, decision makers in related areas, and the lay public interested in an understanding of the relation of the geochemical environment to senescence.

  16. Environment | OpenEI Community

    Open Energy Info (EERE)

    by Jessi3bl(15) Member 16 December, 2012 - 19:18 GE, Clean Energy Fuels Partner to Expand Natural Gas Highway clean energy Clean Energy Fuels energy Environment Fuel GE Innovation...

  17. Alaska Forum on the Environment

    Broader source: Energy.gov [DOE]

    The Alaska Forum on the Environment (AFN) is Alaska's largest statewide gathering of environmental professionals to cover sessions on climate change, energy, environmental regulations, cleanup and remediation, fish and wildlife, solid waste, and more.

  18. Built Environment Energy Analysis Tool

    Broader source: Energy.gov [DOE]

    This documentation describes the development of a tool created to evaluate the effects of built environment scenarios on transportation energy and greenhouse gas (GHG) emissions, and provides guidance on how to apply the tool.

  19. Virtual Advanced Power Training Environments | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Virtual Advanced Power Training Environments

  20. Environment and Compliance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Environment and Compliance Environment and Compliance Environment and Compliance Offices of the Deputy General Counsel for Environment and Compliance Office of the Assistant General Counsel for Environment (GC-51) Office of the Assistant General Counsel for International and National Security Programs (GC-53) Office of NEPA Policy and Compliance (GC-54) Office of the Assistant General Counsel General Law (GC-56) Litigation, Regulation and Enforcement Environment and Compliance Environment

  1. Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Entry-Level Positions If you are just starting your career as an engineer, you can use your technical knowledge and enhance your project management skills as you help oversee NNSA facilities or essential technical projects. If you are entering your career in business management, you may find yourself supporting the oversight of major contracts or assisting budget and financial management personnel in tracking million-dollar contracts. Are you interested in an entry-level, permanent position at

  2. environment

    National Nuclear Security Administration (NNSA)

    history-over 5,900 reactor years of operation and more than 139 million miles steamed on nuclear power-there has never been a reactor accident, nor any release of radioactivity...

  3. environment

    National Nuclear Security Administration (NNSA)

    After operating for 34 years and training over 14,000 sailors, the Department of Energy S1C Prototype Reactor Site in Windsor, Connecticut, was returned to "green field"...

  4. Anthropogenic radionuclides in the environment

    SciTech Connect (OSTI)

    Hu, Q; Weng, J; Wang, J

    2007-11-15

    Studies of radionuclides in the environment have entered a new era with the renaissance of nuclear energy and associated fuel reprocessing, geological disposal of high-level nuclear wastes, and concerns about national security with respect to nuclear non-proliferation. This work presents an overview of anthropogenic radionuclide contamination in the environment, as well as the salient geochemical behavior of important radionuclides. We first discuss the following major anthropogenic sources and current development that contribute to the radionuclide contamination of the environment: (1) nuclear weapons program; (2) nuclear weapons testing; (3) nuclear power plants; (4) commercial fuel reprocessing; (5) geological repository of high-level nuclear wastes, and (6) nuclear accidents. Then, we summarize the geochemical behavior for radionuclides {sup 99}Tc, {sup 129}I, and {sup 237}Np, because of their complex geochemical behavior, long half-lives, and presumably high mobility in the environment. Biogeochemical cycling and environment risk assessment must take into account speciation of these redox-sensitive radionuclides.

  5. Environment, Safety and Health Reporting

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2012-01-01

    To ensure timely collection, reporting, analysis, and dissemination of information on environment, safety, and health issues as required by law or regulations or as needed to ensure that the Department of Energy (DOE) and National Nuclear Security Administration are kept fully informed on a timely basis about events that could adversely affect the health and safety of the public or the workers, the environment, the intended purpose of DOE facilities, or the credibility of the Department. Cancels DOE O 210.1, DOE O 231.1, DOE O 232.1A. Canceled by DOE O 231.1B. DOE O 231.1B cancels all portions pertaining to environment, safety, and health reporting. Occurrence reporting and processing of operations information provisions remain in effect until January 1, 2012.

  6. Environment, Safety, and Health Reporting

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-08-19

    To ensure timely collection, reporting, analysis, and dissemination of information on environment, safety, and health issues as required by law or regulations or as needed to ensure that the Department of Energy (DOE) and National Nuclear Security Administration (NNSA) are kept fully informed on a timely basis about events that could adversely affect the health and safety of the public or the workers, the environment, the intended purpose of DOE facilities, or the credibility of the Department. Cancels DOE O 210.1, DOE O 231.1, and DOE O 232.1A. Canceled by DOE O 232.2.

  7. Advanced materials in marine environments

    SciTech Connect (OSTI)

    Sedriks, A.J. )

    1994-02-01

    This article outlines engineering applications of advanced materials, such as polymer-matrix composites; superferritic, superaustenitic, and superduplex stainless steels (SS); and titanium alloys in hulls, condensers/heat exchangers, and centrifugal pumps operating in marine environments. Although many traditional seawater corrosion problems have been eliminated by the use of these materials, other environment-induced effects have been identified, notable among them strength degradation, blister formation, and cavitation in polymer-matrix composites; hydrogen embrittlement and crevice corrosion in superferritic SS; and hydride precipitation in titanium. Measures for avoiding these effects are discussed.

  8. Virtual Control Systems Environment (VCSE)

    SciTech Connect (OSTI)

    Atkins, Will

    2012-10-08

    Will Atkins, a Sandia National Laboratories computer engineer discusses cybersecurity research work for process control systems. Will explains his work on the Virtual Control Systems Environment project to develop a modeling and simulation framework of the U.S. electric grid in order to study and mitigate possible cyberattacks on infrastructure.

  9. Alaska Forum on the Environment

    Broader source: Energy.gov [DOE]

    The Alaska Forum on the Environment is Alaska's largest statewide gathering of environmental professionals from government agencies, nonprofit and for-profit businesses, community leaders, Alaskan youth, conservationists, biologists, and community elders. The sessions include topics on climate change, energy, environmental regulations, cleanup and remediation, solid waste, and more.

  10. Virtual Control Systems Environment (VCSE)

    ScienceCinema (OSTI)

    Atkins, Will

    2014-02-26

    Will Atkins, a Sandia National Laboratories computer engineer discusses cybersecurity research work for process control systems. Will explains his work on the Virtual Control Systems Environment project to develop a modeling and simulation framework of the U.S. electric grid in order to study and mitigate possible cyberattacks on infrastructure.

  11. Environment, Safety and Health Reporting

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-06-27

    The order addresses DOE/NNSA receiving timely, accurate information about events that have affected or could adversely affect the health, safety and security of the public or workers, the environment, the operations of DOE facilities, or the credibility of the Department. Admin Chg 1, dated 11-28-12, Supersedes DOE O 231.1B.

  12. Geothermal/Environment | Open Energy Information

    Open Energy Info (EERE)

    GeothermalEnvironment < Geothermal(Redirected from Environment) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Land Use Planning Leasing Exploration Well Field Power...

  13. Delta Energy Environment | Open Energy Information

    Open Energy Info (EERE)

    Delta Energy & Environment Place: Glasgow, Scotland, United Kingdom Zip: G1 3TA Sector: Renewable Energy Product: Delta Energy & Environment provides consultancy, research and...

  14. Environment and Compliance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Environment and Compliance Environment and Compliance Cooling Tower Reflection | Credit: DOE Archives Cooling Tower Reflection | Credit: DOE Archives Offices of the Deputy General...

  15. Independent Oversight Environment, Oak Ridge National Laboratory...

    Broader source: Energy.gov (indexed) [DOE]

    This report documents the results of an inspection of the environment, safety, and health ... of Independent Oversight's Office of Environment, Safety and Health Evaluations, within ...

  16. Understanding the Temperature and Humidity Environment Inside...

    Broader source: Energy.gov (indexed) [DOE]

    Understanding the Temperature and Humidity Environment Inside a PV Module aims to show that by choosing humidity conditions that more closely match the use environment, one can ...

  17. Ecology Environment Inc | Open Energy Information

    Open Energy Info (EERE)

    Environment Inc Jump to: navigation, search Name: Ecology & Environment, Inc. Place: Seattle, Washington Zip: 98104 Product: Environmental consulting firm serving corporate and...

  18. Policy and Regulatory Environment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Soft Costs Policy and Regulatory Environment Policy and Regulatory Environment Photo of a man speaking while seated at a table with men and women surrounding him. A favorable ...

  19. Nanjing Langdun Lvyuan Environment Technology Development Co...

    Open Energy Info (EERE)

    Lvyuan Environment Technology Development Co Ltd Jump to: navigation, search Name: Nanjing Langdun Lvyuan Environment Technology Development Co Ltd Place: Nanjing, Jiangsu...

  20. New Mexico Environment Department | Open Energy Information

    Open Energy Info (EERE)

    Department Jump to: navigation, search Logo: New Mexico Environment Department Name: New Mexico Environment Department Abbreviation: NMED Address: 1190 St. Francis Drive, Suite...

  1. Computer Assisted Virtual Environment - CAVE

    SciTech Connect (OSTI)

    Erickson, Phillip; Podgorney, Robert; Weingartner, Shawn; Whiting, Eric

    2014-01-14

    Research at the Center for Advanced Energy Studies is taking on another dimension with a 3-D device known as a Computer Assisted Virtual Environment. The CAVE uses projection to display high-end computer graphics on three walls and the floor. By wearing 3-D glasses to create depth perception and holding a wand to move and rotate images, users can delve into data.

  2. Built Environment Wind Turbine Roadmap

    SciTech Connect (OSTI)

    Smith, J.; Forsyth, T.; Sinclair, K.; Oteri, F.

    2012-11-01

    The market currently encourages BWT deployment before the technology is ready for full-scale commercialization. To address this issue, industry stakeholders convened a Rooftop and Built-Environment Wind Turbine Workshop on August 11 - 12, 2010, at the National Wind Technology Center, located at the U.S. Department of Energy’s National Renewable Energy Laboratory in Boulder, Colorado. This report summarizes the workshop.

  3. Environment and Materials Stewardship | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment and Materials Stewardship NREL's sustainability programs reduce greenhouse gases, reduce waste and prevent pollution, and encourage green purchasing. Sustainability, successfully integrated with environmental management, protects and enhances the vegetation, wildlife, and natural resources on NREL's campus. A photo of a falcon flying low over tall, brown grasses A Golden Eagle flies from a lift to his trainer during research at the National Wind Technology Center to help NREL develop

  4. Environment, Health, and Safety | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment, Health, Safety & Security Worker Safety and Health Training at the Strategic Petroleum Reserve on September 26-29 Worker Safety and Health Training at the Strategic Petroleum Reserve on September 26-29 The Office of Worker Safety and Health Policy will provide outreach training at the Strategic Petroleum Reserve to enhance understanding of the requirements of OSHA construction safety standards pursuant to DOE adoption of OSHA standards under DOE O 440.1B. Read more Possible Scam

  5. environment | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    environment Pantex makes paper into compost Every year, NNSA's Pantex Plant uses thousands of pounds of paper that must be destroyed to protect sensitive information. For the vast majority of that paper, a trip through the shredder is not the end of its purpose, but only a beginning. After spending a few weeks composting in a pile of feedlot... DOE celebrates Earth Day DOE today celebrated Earth Day with Community Day on the DOE Pavilion. More than 20 local green exhibitors, including various

  6. Safety & Environment | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Safety & Environment At Jefferson Lab, the health and safety of employees, users, contractors, visitors and the general public are our highest priorities. In concert with federal and state regulations, and based on years of experience and benchmarking, the lab has established rules and procedures that protect health and safety. It is lab policy to comply with all environmental regulations and laws. It is also the lab's policy to efficiently use energy resources, and to comply with all energy

  7. Computer Assisted Virtual Environment - CAVE

    ScienceCinema (OSTI)

    Erickson, Phillip; Podgorney, Robert; Weingartner, Shawn; Whiting, Eric

    2014-06-09

    Research at the Center for Advanced Energy Studies is taking on another dimension with a 3-D device known as a Computer Assisted Virtual Environment. The CAVE uses projection to display high-end computer graphics on three walls and the floor. By wearing 3-D glasses to create depth perception and holding a wand to move and rotate images, users can delve into data.

  8. Environment, Safety and Health Reporting

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-06-27

    The order addresses DOE/NNSA receiving timely, accurate information about events that have affected or could adversely affect the health, safety and security of the public or workers, the environment, the operations of DOE facilities, or the credibility of the Department. Cancels DOE N 234.1. Supersedes DOE O 231.1A Chg 1, DOE M 231.1-1A Chg 2.

  9. RNEDE: Resilient Network Design Environment

    SciTech Connect (OSTI)

    Venkat Venkatasubramanian, Tanu Malik, Arun Giridh; Craig Rieger; Keith Daum; Miles McQueen

    2010-08-01

    Modern living is more and more dependent on the intricate web of critical infrastructure systems. The failure or damage of such systems can cause huge disruptions. Traditional design of this web of critical infrastructure systems was based on the principles of functionality and reliability. However, it is increasingly being realized that such design objectives are not sufficient. Threats, disruptions and faults often compromise the network, taking away the benefits of an efficient and reliable design. Thus, traditional network design parameters must be combined with self-healing mechanisms to obtain a resilient design of the network. In this paper, we present RNEDEa resilient network design environment that that not only optimizes the network for performance but tolerates fluctuations in its structure that result from external threats and disruptions. The environment evaluates a set of remedial actions to bring a compromised network to an optimal level of functionality. The environment includes a visualizer that enables the network administrator to be aware of the current state of the network and the suggested remedial actions at all times.

  10. MOOSE: Multiphysics Object-Oriented Simulation Environment

    SciTech Connect (OSTI)

    Gaston, Derek

    2014-04-09

    An overview of Idaho National Laboratory's MOOSE: Multiphysics Object-Oriented Simulation Environment

  11. MOOSE: Multiphysics Object-Oriented Simulation Environment

    ScienceCinema (OSTI)

    Gaston, Derek

    2014-05-30

    An overview of Idaho National Laboratory's MOOSE: Multiphysics Object-Oriented Simulation Environment

  12. Advanced Instrumentation for Extreme Environments

    SciTech Connect (OSTI)

    Melin, Alexander M; Kisner, Roger; Fugate, David L

    2013-01-01

    The Department of Energy (DOE) Office of Nuclear Energy (NE) is pursuing embedded instrumentation and controls (I&C) technology for next generation nuclear power generation applications. Embedded systems encompass a wide range of configurations and technologies; we define embedding in this instance as the integration of the sensors and the control system design into the component design using a systems engineering process. Embedded I&C systems are often an essential part of developing new capabilities, improving reliability, enhancing performance, and reducing operational costs. The new intrinsically safe, more efficient, and cost effective reactor technologies (Next Generation Nuclear Plant and Small Modular Reactors) require the development and application of new I&C technologies. These new designs raise extreme environmental challenges such as high temperatures (over 700 C) and material compatibility (e.g., molten salts). The desired reliability and functionality requires measurements in these extreme conditions including high radiation environments which were not previously monitored in real time. The DOE/NE Nuclear Energy Enabling Technologies (NEET) program currently has several projects investigating I&C technologies necessary to make these reactor designs realizable. The project described in this paper has the specific goal of investigating embedded I&C with the following objectives: 1.Explore and quantify the potential gains from embedded I&C improved reliability, increased performance, and reduced cost 2.Identify practical control, sensing, and measurement techniques for the extreme environments found in high-temperature reactors 3.Design and fabricate a functional prototype high-temperature cooling pump for molten salts represents target demonstration of improved performance, reliability, and widespread usage There are many engineering challenges in the design of a high-temperature liquid salt cooling pump. The pump and motor are in direct contact with

  13. ZERH Arch Designer PA rev (2)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    You will receive an email with a login password asking you to confirm your participation. ... You may use your password to login anytime to change contact information or remove ...

  14. 04-Environment-Turner.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computing Environment Node Types * Login nodes - Shared - Job p repara,on a nd s ubmission * MOM n odes - Shared - Where b atch s cript e xecutes * Parallel j ob l auncher - Hopper/Edison: a prun - Carver: m pirun * Compute n odes - Not s hared * Except s erial q ueue --- 2 --- Login Nodes * Edison - Twelve n odes * 16 c ores, 2 .0GHz I ntel S andy B ridge * 512GB * Hopper - Eight n odes * 16 c ores, 2 .4GHz A MD O pteron - Four nodes * 32 c ores, 2 .0GHz A MD O pteron - 128GB * Carver - Four

  15. Advanced engineering environment pilot project.

    SciTech Connect (OSTI)

    Schwegel, Jill; Pomplun, Alan R.; Abernathy, Rusty

    2006-10-01

    The Advanced Engineering Environment (AEE) is a concurrent engineering concept that enables real-time process tooling design and analysis, collaborative process flow development, automated document creation, and full process traceability throughout a product's life cycle. The AEE will enable NNSA's Design and Production Agencies to collaborate through a singular integrated process. Sandia National Laboratories and Parametric Technology Corporation (PTC) are working together on a prototype AEE pilot project to evaluate PTC's product collaboration tools relative to the needs of the NWC. The primary deliverable for the project is a set of validated criteria for defining a complete commercial off-the-shelf (COTS) solution to deploy the AEE across the NWC.

  16. Coexistence: Exploration and the environment

    SciTech Connect (OSTI)

    Cunningham, P.S.; Winston, J.G.; Watt, G.L.

    1995-12-31

    One of the major challenges in our industry today is successfully meeting two needs of the planet that often appear to be conflicting: Meeting the economic needs of the people through sustainable development of natural resources while preserving the integrity and diversity of our environment. Nowhere is this more critical than in the world`s wetlands and rain forests. This presentation demonstrates the principles and practices that have fostered coexistence of environmental protection and sustainable development projects in wetlands and tropical forests in the Americas. Excerpts from two projects are shown. one in a national wildlife refuge in Louisiana, and one in the rain forests of Bolivia.

  17. Reference waste package environment report

    SciTech Connect (OSTI)

    Glassley, W.E.

    1986-10-01

    One of three candidate repository sites for high-level radioactive waste packages is located at Yucca Mountain, Nevada, in rhyolitic tuff 700 to 1400 ft above the static water table. Calculations indicate that the package environment will experience a maximum temperature of {similar_to}230{sup 0}C at 9 years after emplacement. For the next 300 years the rock within 1 m of the waste packages will remain dehydrated. Preliminary results suggest that the waste package radiation field will have very little effect on the mechanical properties of the rock. Radiolysis products will have a negligible effect on the rock even after rehydration. Unfractured specimens of repository rock show no change in hydrologic characteristics during repeated dehydration-rehydration cycles. Fractured samples with initially high permeabilities show a striking permeability decrease during dehydration-rehydration cycling, which may be due to fracture healing via deposition of silica. Rock-water interaction studies demonstrate low and benign levels of anions and most cations. The development of sorptive secondary phases such as zeolites and clays suggests that anticipated rock-water interaction may produce beneficial changes in the package environment.

  18. Los Alamos Lab: Fossil Energy & Environment, Home

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A New Era for Fossil Fuels The Office of Fossil Energy and Environment (FE) is the focal ... Maintaining a prosperous global economy and a healthy environment will require a diverse ...

  19. Tag: environment | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    environment Tag: environment Displaying 1 - 7 of 7... Category: News Y-12 completes waste removal project two years ahead of schedule Y-12 completed disposition of 2,247 containers ...

  20. Environment, Safety, and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-11-07

    This Manual provides detailed requirements to supplement DOE O 231.1, ENVIRONMENT, SAFETY AND HEALTH REPORTING, which establishes management objectives and requirements for reporting environment, safety and health information. Chg 1, 11-7-96.

  1. Environment Safety and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-30

    This Manual provides detailed requirements to supplement DOE O 231.1, Environment, Safety and Health Reporting, which establishes management objectives and requirements for reporting environment, safety and health information. Does not cancel other directives.

  2. Radiation effects in the environment

    SciTech Connect (OSTI)

    Begay, F.; Rosen, L.; Petersen, D.F.; Mason, C.; Travis, B.; Yazzie, A.; Isaac, M.C.P.; Seaborg, G.T.; Leavitt, C.P.

    1999-04-01

    Although the Navajo possess substantial resource wealth-coal, gas, uranium, water-this potential wealth has been translated into limited permanent economic or political power. In fact, wealth or potential for wealth has often made the Navajo the victims of more powerful interests greedy for the assets under limited Navajo control. The primary focus for this education workshop on the radiation effects in the environment is to provide a forum where scientists from the nuclear science and technology community can share their knowledge toward the advancement and diffusion of nuclear science and technology issues for the Navajo public. The scientists will make an attempt to consider the following basic questions; what is science; what is mathematics; what is nuclear radiation? Seven papers are included in this report: Navajo view of radiation; Nuclear energy, national security and international stability; ABC`s of nuclear science; Nuclear medicine: 100 years in the making; Radon in the environment; Bicarbonate leaching of uranium; and Computational methods for subsurface flow and transport. The proceedings of this workshop will be used as a valuable reference materials in future workshops and K-14 classrooms in Navajo communities that need to improve basic understanding of nuclear science and technology issues. Results of the Begay-Stevens research has revealed the existence of strange and mysterious concepts in the Navajo Language of nature. With these research results Begay and Stevens prepared a lecture entitled The Physics of Laser Fusion in the Navajo language. This lecture has been delivered in numerous Navajo schools, and in universities and colleges in the US, Canada, and Alaska.

  3. State of the research environment - 2013

    SciTech Connect (OSTI)

    Phillips, Julia Mae; Simmons, Jerry Alvon; Weaver, Karla

    2014-02-01

    This report describes the condition of the research environment at Sandia National Laboratories and outlines key environment improvement activities undertaken by the Office of the Chief Technology Officer and the Sandia Research Leadership Team during fiscal year 2013. The report also outlines Lab-level objectives related to the research environment for fiscal year 2014.

  4. Multiphysics Object Oriented Simulation Environment

    SciTech Connect (OSTI)

    2014-02-12

    The Multiphysics Object Oriented Simulation Environment (MOOSE) software library developed at Idaho National Laboratory is a tool. MOOSE, like other tools, doesn’t actually complete a task. Instead, MOOSE seeks to reduce the effort required to create engineering simulation applications. MOOSE itself is a software library: a blank canvas upon which you write equations and then MOOSE can help you solve them. MOOSE is comparable to a spreadsheet application. A spreadsheet, by itself, doesn’t do anything. Only once equations are entered into it will a spreadsheet application compute anything. Such is the same for MOOSE. An engineer or scientist can utilize the equation solvers within MOOSE to solve equations related to their area of study. For instance, a geomechanical scientist can input equations related to water flow in underground reservoirs and MOOSE can solve those equations to give the scientist an idea of how water could move over time. An engineer might input equations related to the forces in steel beams in order to understand the load bearing capacity of a bridge. Because MOOSE is a blank canvas it can be useful in many scientific and engineering pursuits.

  5. FASCODE for the environment (FASE)

    SciTech Connect (OSTI)

    Snell, H.E.; Moncet, J.L.; Anderson, G.P.; Chetwynd, J.H.

    1996-04-01

    The Optical Physics Division of the Phillips Laboratory, with support from the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Program, is developing a state-of-the-art line-by-line atmospheric radiative transfer model as the successor to FASCODE. The goal of this project is to create a computationally efficient model which contains the most up-to-date atmospheric physics. The new model, known as FASCODE for the Environment, or {open_quotes}FASE{close_quotes}, will combine the best features of FASCODE and LBLRTM, the DOE`s standard radiative transfer model. FASE will also contain new features such as new cross-sections for heavy molecules, and improved solar irradiance model, and improvements to the Schumann-Runge bands and continuum. The code will be optimized for vectorized and/or parallel processing. put under configuration control for easy maintenance, and structured into separate modules for each function: atmospheric profiles, layer optical properties, radiative transfer, multiple-scattering, etc. This modular structure will allow for increased flexibility and easy customization of the code for specialized applications, such as a forward model for iterative inversion algorithms. Ease-of-use will be enhanced with improved input control structures and documentation to accommodate the needs of novice and advanced users. This paper addresses changes which have been made to FASCODE and LBLRTM to create FASE, and gives an overview of the modular structure and its capabilities.

  6. Advanced engineering environment collaboration project.

    SciTech Connect (OSTI)

    Lamph, Jane Ann; Pomplun, Alan R.; Kiba, Grant W.; Dutra, Edward G.; Dankiewicz, Robert J.; Marburger, Scot J.

    2008-12-01

    The Advanced Engineering Environment (AEE) is a model for an engineering design and communications system that will enhance project collaboration throughout the nuclear weapons complex (NWC). Sandia National Laboratories and Parametric Technology Corporation (PTC) worked together on a prototype project to evaluate the suitability of a portion of PTC's Windchill 9.0 suite of data management, design and collaboration tools as the basis for an AEE. The AEE project team implemented Windchill 9.0 development servers in both classified and unclassified domains and used them to test and evaluate the Windchill tool suite relative to the needs of the NWC using weapons project use cases. A primary deliverable was the development of a new real time collaborative desktop design and engineering process using PDMLink (data management tool), Pro/Engineer (mechanical computer aided design tool) and ProductView Lite (visualization tool). Additional project activities included evaluations of PTC's electrical computer aided design, visualization, and engineering calculations applications. This report documents the AEE project work to share information and lessons learned with other NWC sites. It also provides PTC with recommendations for improving their products for NWC applications.

  7. Radionuclide behavior in the environment

    SciTech Connect (OSTI)

    Tveten, U. )

    1991-09-01

    The purpose of this report is to document the results of the following task: Review for quality and consistency the available data on measurements of initial ground contamination of Chernobyl radionuclides in various parts of Norway and subsequent concentrations of these radionuclides in various environmental media as functions of time. Utilize the data obtained to verify the existing models, or to improve them, for describing radionuclide behavior in the environment. Some of the processes standard were: migration into soil; weathering; resuspension; food-chain contamination; and loss or reconcentration by run-off. The task performed within this contract has been to use post-Chernobyl data from Norway to verify or find areas for possible improvement in the chronic exposure pathway models utilized in MACCS. Work has consisted mainly of collecting and evaluating post-Chernobyl information from Norway or other countries when relevant; but has also included experimental work performed specifically for the current task. In most connections the data available show the models and data in MACCS to be appropriate. A few areas where the data indicate that the MACCS approach is faulty or inadequate are, however, pointed out in the report. These should be examined carefully, and appropriate modifications should eventually be made. 14 refs., 12 figs., 22 tabs.

  8. Multiphysics Object Oriented Simulation Environment

    Energy Science and Technology Software Center (OSTI)

    2014-02-12

    The Multiphysics Object Oriented Simulation Environment (MOOSE) software library developed at Idaho National Laboratory is a tool. MOOSE, like other tools, doesn’t actually complete a task. Instead, MOOSE seeks to reduce the effort required to create engineering simulation applications. MOOSE itself is a software library: a blank canvas upon which you write equations and then MOOSE can help you solve them. MOOSE is comparable to a spreadsheet application. A spreadsheet, by itself, doesn’t do anything.more » Only once equations are entered into it will a spreadsheet application compute anything. Such is the same for MOOSE. An engineer or scientist can utilize the equation solvers within MOOSE to solve equations related to their area of study. For instance, a geomechanical scientist can input equations related to water flow in underground reservoirs and MOOSE can solve those equations to give the scientist an idea of how water could move over time. An engineer might input equations related to the forces in steel beams in order to understand the load bearing capacity of a bridge. Because MOOSE is a blank canvas it can be useful in many scientific and engineering pursuits.« less

  9. Generalized Environment for Modeling Systems

    Energy Science and Technology Software Center (OSTI)

    2012-02-07

    GEMS is an integrated environment that allows technical analysts, modelers, researchers, etc. to integrate and deploy models and/or decision tools with associated data to the internet for direct use by customers. GEMS does not require that the model developer know how to code or script and therefore delivers this capability to a large group of technical specialists. Customers gain the benefit of being able to execute their own scenarios directly without need for technical support.more » GEMS is a process that leverages commercial software products with specialized codes that add connectivity and unique functions to support the overall capability. Users integrate pre-existing models with a commercial product and store parameters and input trajectories in a companion commercial database. The model is then exposed into a commercial web environment and a graphical user interface (GUI) is applied by the model developer. Users execute the model through the web based GUI and GEMS manages supply of proper inputs, execution of models, routing of data to models and display of results back to users. GEMS works in layers, the following description is from the bottom up. Modelers create models in the modeling tool of their choice such as Excel, Matlab, or Fortran. They can also use models from a library of previously wrapped legacy codes (models). Modelers integrate the models (or a single model) by wrapping and connecting the models using the Phoenix Integration tool entitled ModelCenter. Using a ModelCenter/SAS plugin (DOE copyright CW-10-08) the modeler gets data from either an SAS or SQL database and sends results back to SAS or SQL. Once the model is working properly, the ModelCenter file is saved and stored in a folder location to which a SharePoint server tool created at INL is pointed. This enables the ModelCenter model to be run from SharePoint. The modeler then goes into Microsoft SharePoint and creates a graphical user interface (GUI) using the ModelCenter Web

  10. Environment, Health, and Safety - Construction Subcontractors Documents |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information Administration (EIA) Environment Glossary › FAQS › Overview Data Summary Electric Power Plant Environmental International Emissions All Environment Data Reports Analysis & Projections All Reports ‹ environment Carbon Dioxide Emissions Coefficients Release Date: February 2, 2016 | Also available in spreadsheet Carbon Dioxide Emissions Coefficients by Fuel Pounds CO2 Kilograms CO2 Pounds CO2 Kilograms CO2 Carbon Dioxide (CO2) Factors: Per Unit of Volume or Mass Volume or

  11. Built Environs Pty Ltd | Open Energy Information

    Open Energy Info (EERE)

    Ltd Jump to: navigation, search Name: Built Environs Pty Ltd Place: Adelaide, South Australia, Australia Zip: 5000 Product: Adelaide based construction and engineering firm...

  12. Radiation Effects in the Space Telecommunications Environment...

    Office of Scientific and Technical Information (OSTI)

    challenges for electronics that must operate reliably in the natural space environment. ... discussed for device modeling and for the use of standard commercial electronics in space. ...

  13. NREL: Environment, Health, and Safety - Construction Subcontractors...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    performed on NREL-owned property, including South Table Mountain and the National Wind Technology Center. The Construction Environment, Health & Safety Plan (CEHSP). Each...

  14. Stockholm Environment Institute (SEI) | Open Energy Information

    Open Energy Info (EERE)

    vulnerability and governance, as well as specific problems such as water resources and air pollution.2 References Stockholm Environment Institute 2.0 2.1 About SEI...

  15. Sandia National Laboratories: Electromagnetic Environments Simulator...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High bandwidth oscilloscopes and spectrum analyzers are used to acquire transient and CW ...m @ 4 m Related Links Pulsed Power Electromagnetic Environments Simulator (EMES) ...

  16. Stockholm Environment Institute (SEI) | Open Energy Information

    Open Energy Info (EERE)

    The Stockholm Environment Institute, located in Stockholm, Sweden, is an independent international research institute. The SEI is dedicated to bringing scientific insights to...

  17. The Environment Council | Open Energy Information

    Open Energy Info (EERE)

    Council Jump to: navigation, search Name: The Environment Council Place: London, England, United Kingdom Zip: WC1V 7BF Product: UK's environmental engagement charity. Coordinates:...

  18. Independent Oversight Inspection of Environment, Safety, and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Health Programs at the Savannah River Operations Office and Savannah River Site, January 2010 Independent Oversight Inspection of Environment, Safety, and Health Programs ...

  19. Effects on the Physical Environment (Hydrodynamics, Sediment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sediment Transport, and Water Quality) Effects on the Physical Environment (Hydrodynamics, ... Development 2014 Water Power Program Peer Review Compiled Presentations: Marine and ...

  20. Global Environment Fund GEF | Open Energy Information

    Open Energy Info (EERE)

    Invests in companies that make positive contributions to environmental quality, human health and sustainable management of resources. References: Global Environment Fund...

  1. Geothermal/Environment | Open Energy Information

    Open Energy Info (EERE)

    dry steam geothermal field in California emits steam into the atmosphere. The impact that geothermal energy has on the environment depends on the type of cooling and conversion...

  2. Solar Policy Environment: Portland | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Portland Solar Policy Environment: Portland This document outlines the policies in place affecting solar deployment. City of Portland's Solar Now Program will pursue solar market ...

  3. Virtual Environment for Reactor Applications (VERA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment for Reactor Applications (VERA) Modern high performance computing (HPC) platforms bring an opportunity for modeling and simulation (modsim) at levels of detail...

  4. PIA - Savannah River Nuclear Solution SRNS ProRad Environment...

    Office of Environmental Management (EM)

    SRNS ProRad Environment Management PIA - Savannah River Nuclear Solution SRNS ProRad Environment Management PIA - Savannah River Nuclear Solution SRNS ProRad Environment Management ...

  5. Poverty-Environment Initiative (PEI) | Open Energy Information

    Open Energy Info (EERE)

    Poverty-Environment Initiative (PEI) Jump to: navigation, search Name Poverty-Environment Initiative (PEI) AgencyCompany Organization UNDP, UNEP Partner Poverty and Environment...

  6. Stanford - Woods Institute for the Environment | Open Energy...

    Open Energy Info (EERE)

    Stanford - Woods Institute for the Environment Jump to: navigation, search Logo: Stanford- Woods Institute for the Environment Name: Stanford- Woods Institute for the Environment...

  7. Emerging semantics to link phenotype and environment

    SciTech Connect (OSTI)

    Thessen, Anne E.; Bunker, Daniel E.; Buttigieg, Pier Luigi; Cooper, Laurel D.; Dahdul, Wasila M.; Domisch, Sami; Franz, Nico M.; Jaiswal, Pankaj; Lawrence-Dill, Carolyn J.; Midford, Peter E.; Mungall, Christopher J.; Ramirez, Martin J.; Specht, Chelsea D.; Vogt, Lars; Vos, Rutger Aldo; Walls, Ramona L.; White, Jeffrey W.; Zhang, Guanyang; Deans, Andrew R.; Huala, Eva; Lewis, Suzanna E.; Mabee, Paula M.

    2015-12-14

    Understanding the interplay between environmental conditions and phenotypes is a fundamental goal of biology. Unfortunately, data that include observations on phenotype and environment are highly heterogeneous and thus difficult to find and integrate. One approach that is likely to improve the status quo involves the use of ontologies to standardize and link data about phenotypes and environments. Specifying and linking data through ontologies will allow researchers to increase the scope and flexibility of large-scale analyses aided by modern computing methods. Investments in this area would advance diverse fields such as ecology, phylogenetics, and conservation biology. While several biological ontologies are well-developed, using them to link phenotypes and environments is rare because of gaps in ontological coverage and limits to interoperability among ontologies and disciplines. Lastly, in this manuscript, we present (1) use cases from diverse disciplines to illustrate questions that could be answered more efficiently using a robust linkage between phenotypes and environments, (2) two proof-of-concept analyses that show the value of linking phenotypes to environments in fishes and amphibians, and (3) two proposed example data models for linking phenotypes and environments using the extensible observation ontology (OBOE) and the Biological Collections Ontology (BCO); these provide a starting point for the development of a data model linking phenotypes and environments.

  8. Emerging semantics to link phenotype and environment

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Thessen, Anne E.; Bunker, Daniel E.; Buttigieg, Pier Luigi; Cooper, Laurel D.; Dahdul, Wasila M.; Domisch, Sami; Franz, Nico M.; Jaiswal, Pankaj; Lawrence-Dill, Carolyn J.; Midford, Peter E.; et al

    2015-12-14

    Understanding the interplay between environmental conditions and phenotypes is a fundamental goal of biology. Unfortunately, data that include observations on phenotype and environment are highly heterogeneous and thus difficult to find and integrate. One approach that is likely to improve the status quo involves the use of ontologies to standardize and link data about phenotypes and environments. Specifying and linking data through ontologies will allow researchers to increase the scope and flexibility of large-scale analyses aided by modern computing methods. Investments in this area would advance diverse fields such as ecology, phylogenetics, and conservation biology. While several biological ontologies aremore » well-developed, using them to link phenotypes and environments is rare because of gaps in ontological coverage and limits to interoperability among ontologies and disciplines. Lastly, in this manuscript, we present (1) use cases from diverse disciplines to illustrate questions that could be answered more efficiently using a robust linkage between phenotypes and environments, (2) two proof-of-concept analyses that show the value of linking phenotypes to environments in fishes and amphibians, and (3) two proposed example data models for linking phenotypes and environments using the extensible observation ontology (OBOE) and the Biological Collections Ontology (BCO); these provide a starting point for the development of a data model linking phenotypes and environments.« less

  9. Radioiodine in the Savannah River Site environment

    SciTech Connect (OSTI)

    Kantelo, M.V.; Bauer, L.R.; Marter, W.L.; Murphy, C.E. Jr.; Zeigler, C.C.

    1993-01-15

    Radioiodine, which is the collective term for all radioactive isotopes of the element iodine, is formed at the Savannah River Site (SRS) principally as a by-product of nuclear reactor operations. Part of the radioiodine is released to the environment during reactor and reprocessing operations at the site. The purpose of this report is to provide an introduction to radioiodine production and disposition, its status in the environment, and the radiation dose and health risks as a consequence of its release to the environment around the Savannah River Plant. A rigorous dose reconstruction study is to be completed by thee Center for Disease Control during the 1990s.

  10. Built Environment Analysis Tool: April 2013

    SciTech Connect (OSTI)

    Porter, C.

    2013-05-01

    This documentation describes the tool development. It was created to evaluate the effects of built environment scenarios on transportation energy and greenhouse gas (GHG) emissions. This documentation also provides guidance on how to apply the tool.

  11. Economic growth, carrying capacity, and the environment

    SciTech Connect (OSTI)

    Arrow, K.; Bolin, B.; Costanza, R.; Dasgupta, P.; Folke, C.; Maeler, K.G.; Holling, C.S.; Jansson, B.O.; Levin, S.; Perrings, C.

    1995-04-28

    National and international economic policy has usually ignored the environment. In areas where the environment is beginning to impinge on policy, as in the General Agreement on Tariffs and Trade (GATT) and the North American Free Trade Agreement (NAFTA), it remains a tangential concern, and the presumption is often made that economic growth and economic liberalization (including the liberalization of international trade) are, in some sense, good for the environment. This notion has meant that economy-wide policy reforms designed to promote growth and liberalization have been encouraged with little regard to their environmental consequences, presumably on the assumption that these consequences would either take care of themselves or could be dealt with separately. In this article, we discuss the relation between economic growth and environmental quality, and the link between economic activity and the carrying capacity and resilience of the environment.

  12. 2015 Tribal Lands and Environment Forum

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Institute for Tribal Environmental Professionals (ITEP) are hosting the annual Tribal Lands and Environment Forum. The four-day forum will feature special trainings, field trips, and breakout sessions focused on tribal water programs.

  13. 2015 Tribal Lands and Environment Forum

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Institute for Tribal Environmental Professionals (ITEP) are hosting the annual Tribal Lands and Environment Forum. The four-day forum will feature special trainings, field trips, and breakout...

  14. Webinar: Biofuels for the Environment and Communities

    Broader source: Energy.gov [DOE]

    The Energy Department (DOE) will present a live webinar titled “Biofuels for the Environment and Communities” on Wednesday April 22, 2015, from 1:00 p.m. to 2:00 p.m. Eastern Daylight Time.

  15. Water Environment Federation's Annual Technical Exhibition and...

    Broader source: Energy.gov (indexed) [DOE]

    26, 2015 8:30AM CDT to September 30, 2015 5:00PM CDT WEFTEC, the Water Environment Federation's Annual Technical Exhibition and Conference, is the biggest meeting of its kind in...

  16. Orchestrating Bulk Data Movement in Grid Environments

    SciTech Connect (OSTI)

    Vazhkudai, SS

    2005-01-25

    Data Grids provide a convenient environment for researchers to manage and access massively distributed bulk data by addressing several system and transfer challenges inherent to these environments. This work addresses issues involved in the efficient selection and access of replicated data in Grid environments in the context of the Globus Toolkit{trademark}, building middleware that (1) selects datasets in highly replicated environments, enabling efficient scheduling of data transfer requests; (2) predicts transfer times of bulk wide-area data transfers using extensive statistical analysis; and (3) co-allocates bulk data transfer requests, enabling parallel downloads from mirrored sites. These efforts have demonstrated a decentralized data scheduling architecture, a set of forecasting tools that predict bandwidth availability within 15% error and co-allocation architecture, and heuristics that expedites data downloads by up to 2 times.

  17. Line Environment, Safety and Health Oversight

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-06-26

    Sets forth the Department's expectations line management environment, safety and health (ES&H) oversight and for the use of contractor self-assessment programs as the cornerstone for this oversight. Canceled by DOE O 226.1.

  18. Sandia National Laboratories: Electromagnetic Environments Simulator (EMES)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electromagnetic Environments Simulator (EMES) The Electromagnetic Environments Simulator (EMES) is a large transverse electromagnetic (TEM) cell that propagates a uniform, planar electromagnetic wave through the cell volume where test items are placed. EMES can be used for continuous wave (CW) Electromagnetic Radiation (EMR) and transient Electromagnetic Pulse (EMP) testing. The electric field is vertically polarized between the center conductor and the floor. If it is desired to illuminate test

  19. PNNL: About PNNL: Environment, Health and Safety

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment, Health and Safety The success of Pacific Northwest National Laboratory (PNNL) is, in part, dependent upon operational excellence. At PNNL, "operational excellence" means harnessing the energy and passion of every staff member to accomplish our mission: delivering outstanding research results in science and technology while cost effectively managing the Laboratory with the highest standards of good citizenship, safety, health, and environmental stewardship. The Environment,

  20. Protecting the environment into the future

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Protecting the Environment Into the Future Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue: September 1, 2016 all issues All Issues » submit Protecting the environment into the future Last year, the Lab recycled 47 percent of its solid, non-hazardous waste by placing it in the recycling containers. February 1, 2013 dummy image Read our archives. Contacts Editor Linda Anderman Email Community Programs Office Kurt Steinhaus Email The

  1. Acquisition and the Environment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Acquisition » Guidance » Acquisition and the Environment Acquisition and the Environment The information provide on these pages are meant to be resource and tool for the DOE acquisition community. Please share suggestions for its further development and improvement. Provide your comments to Richard Langston at (202) 287-1339, or e-mail them to richard.langston@hq.doe.gov GREEN PURCHASING OVERVIEW The White House Task Force on Recycling along with the US Army Center for Health Promotion and

  2. Environment, Safety & Health | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment, Safety & Health The ABC's of HEP Division Safety A. Job and Hazard Questionnaires (JHQ) are generated to identify environment, safety and health training requirements related to an individual's job at Argonne and thus creates an employee training profile. To view your Training Profile, log in through the Training Management System (TMS). Click the "Current JHQ" tab to view your current responses and the buttons on the left menu to switch between JHQ sections. B. The

  3. Environment, Safety, and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-01-28

    This Manual provides detailed requirements to supplement DOE O 231.1, Environment, Safety and Health Reporting, which establishes management objectives and requirements for reporting environment, safety and health information. (Paragraphs 2a, 2a(1), 2a(2), 2b, 2b(1), 2b(2), and 2i(3)(a) through 2i(3)(d) of Chapter II, and Appendix A canceled by DOE N 231.1; Chapter IV canceled by DOE O 470.2A.)

  4. Enhancing carburization resistance in fossil fuel environments

    SciTech Connect (OSTI)

    Smith, G.D.; Tassen, C.S.

    1995-11-01

    There has been steady progress in the development of wrought alloys for use in gaseous carburizing environments. Contributing significantly to this progress is a growing knowledge base of the role of scales in enhancing carburization resistance. Future improvements in carburization resistance must build upon this level of understanding. This paper seeks to survey some of this wealth of information regarding scale characteristics of commercial wrought nickel-containing alloys as these scales are influenced by environment and alloy composition. Some suggestions as to the future direction of alloy development with regard to scale optimization and minimization of carburization resistance are proposed.

  5. Built Environment Energy Analysis Tool Overview (Presentation)

    SciTech Connect (OSTI)

    Porter, C.

    2013-04-01

    This presentation provides an overview of the Built Environment Energy Analysis Tool, which is designed to assess impacts of future land use/built environment patterns on transportation-related energy use and greenhouse gas (GHG) emissions. The tool can be used to evaluate a range of population distribution and urban design scenarios for 2030 and 2050. This tool was produced as part of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

  6. Built-Environment Wind Turbine Roadmap

    SciTech Connect (OSTI)

    Smith, J.; Forsyth, T.; Sinclair, K.; Oteri, F.

    2012-11-01

    Although only a small contributor to total electricity production needs, built-environment wind turbines (BWTs) nonetheless have the potential to influence the public's consideration of renewable energy, and wind energy in particular. Higher population concentrations in urban environments offer greater opportunities for project visibility and an opportunity to acquaint large numbers of people to the advantages of wind projects on a larger scale. However, turbine failures will be equally visible and could have a negative effect on public perception of wind technology. This roadmap provides a framework for achieving the vision set forth by the attendees of the Built-Environment Wind Turbine Workshop on August 11 - 12, 2010, at the U.S. Department of Energy's National Renewable Energy Laboratory. The BWT roadmap outlines the stakeholder actions that could be taken to overcome the barriers identified. The actions are categorized as near-term (0 - 3 years), medium-term (4 - 7 years), and both near- and medium-term (requiring immediate to medium-term effort). To accomplish these actions, a strategic approach was developed that identifies two focus areas: understanding the built-environment wind resource and developing testing and design standards. The authors summarize the expertise and resources required in these areas.

  7. NETL- Severe Environment Corrosion Erosion Facility

    SciTech Connect (OSTI)

    2013-09-12

    NETL's Severe Environment Corrosion Erosion Facility in Albany studies how new and old materials will stand up to new operating conditions. Work done in the lab supports NETL's oxy-fuel combustion oxidation work, refractory materials stability work, and the fuels program, in particular the hydrogen membrane materials stability work, to determine how best to upgrade existing power plants.

  8. Characterization of the Hanford Site and environs

    SciTech Connect (OSTI)

    Cushing, C.E.

    1991-03-01

    The US Department of Energy (DOE) proposes to site, construct, and operate a new production reactor (NPR) intended to produce materials for the US nuclear weapons program. The DOE has determined that this proposed action constitutes an action that may significantly affect the quality of the human environment; therefore, the DOE is preparing an environmental impact statement (EIS) to assess the potential impacts of the proposed action and reasonable alternatives on the human and natural environment. The NPR-EIS is being prepared in accordance with Section 102(2)(C) of the National Environmental Policy Act of 1969 (NEPA), as implemented in regulations (40 CFR 1500--1508) promulgated by the Council on Environmental Quality (CEQ). Information on the potentially affected environment at the Hanford Site and its environs was provided to ANL by PNL in various submissions during CY-1989, and some of that information was consolidated into this report, which is considered to be supporting documentation for the NPR-EIS. 93 refs., 35 figs., 46 tabs.

  9. NETL- Severe Environment Corrosion Erosion Facility

    ScienceCinema (OSTI)

    None

    2014-06-16

    NETL's Severe Environment Corrosion Erosion Facility in Albany studies how new and old materials will stand up to new operating conditions. Work done in the lab supports NETL's oxy-fuel combustion oxidation work, refractory materials stability work, and the fuels program, in particular the hydrogen membrane materials stability work, to determine how best to upgrade existing power plants.

  10. How to Save the Environment and Money

    Broader source: Energy.gov [DOE]

    Yesterday, Secretary Chu hosted a live chat discussion to celebrate the 42nd annual Earth Day. The conversation with an in-person audience, streamed live here on energy.gov, highlighted the fact that we don’t have to choose between our economy and our environment. Watch the video.

  11. Natural radiation environment III. [Lead Abstract

    SciTech Connect (OSTI)

    Gesell, T.F.; Lowder, W.M.

    1980-01-01

    Separate abstracts were prepared for the 52 research papers presented at this symposium in April 1978. The major topics in this volume deal with penetrating radiation measurements, radiation surveys and population exposure, radioactivity in the indoor environment, and technologically enhanced natural radioactivity. (KRM)

  12. Neutrino mixing and oscillations in astrophysical environments

    SciTech Connect (OSTI)

    Balantekin, A. B.

    2014-05-02

    A brief review of the current status of neutrino mixing and oscillations in astrophysical environments, with particular emphasis on the Sun and core-collapse supernovae, is given. Implications of the existence of sterile states which mix with the active neutrinos are discussed.

  13. THE ENVIRONMENT CREATED BY A NUCLEAR EXPLOSION IN SALT. Project...

    Office of Scientific and Technical Information (OSTI)

    THE ENVIRONMENT CREATED BY A NUCLEAR EXPLOSION IN SALT. Project GNOME Citation Details In-Document Search Title: THE ENVIRONMENT CREATED BY A NUCLEAR EXPLOSION IN SALT. Project ...

  14. China Institute of Geo Environment Monitoring | Open Energy Informatio...

    Open Energy Info (EERE)

    Institute of Geo Environment Monitoring Jump to: navigation, search Name: China Institute of Geo-Environment Monitoring Place: China Sector: Geothermal energy Product: Chinese...

  15. Beijing China Sciences General Energy Environment GEE | Open...

    Open Energy Info (EERE)

    Sciences General Energy Environment GEE Jump to: navigation, search Name: Beijing China Sciences General Energy&Environment (GEE) Place: Beijing Municipality, China Zip: 100080...

  16. American Bar Association Section on Environment | Open Energy...

    Open Energy Info (EERE)

    Bar Association Section on Environment Jump to: navigation, search Name: American Bar Association Section on Environment Place: Chicago, Illinois Zip: 60610 Product: The Section of...

  17. Events & Topics in Renewable Energy & the Environment | Photosynthetic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Events & Topics in Renewable Energy & the Environment Events & Topics in Renewable Energy & the Environment MIssouri Botanical Garden | Earthways Center - October 6th, 3:15 -...

  18. GCL Engineering Ltd formerly Jiangsu Suyuan Environment Protection...

    Open Energy Info (EERE)

    Engineering Ltd formerly Jiangsu Suyuan Environment Protection Engineering Jump to: navigation, search Name: GCL Engineering Ltd (formerly Jiangsu Suyuan Environment Protection...

  19. Selective reduction of NOx in oxygen rich environments with plasma...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    environments with plasma-assisted catalysis: Catalyst development and mechanistic studies Selective reduction of NOx in oxygen rich environments with plasma-assisted catalysis: ...

  20. Statement: Committee on Environment and Public Works United States...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Statement: Committee on Environment and Public Works United States Senate Statement: Committee on Environment and Public Works United States Senate Senate Testimony Committee on...

  1. Before the House Subcommittee on Energy and Environment - Committee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation Before the House Subcommittee on Energy and Environment - Committee on Science, Space, and Transportation Before the House Subcommittee on Energy and Environment -...

  2. Before the Senate Committee on Environment and Public Works ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Environment and Public Works Before the Senate Committee on Environment and Public Works Testimony of Steven Chalk, Deputy Assistant Secretary for Renewable Power Before the Senate...

  3. 2011 Annual Planning Summary for NNSA, Infrastructure and Environment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NNSA, Infrastructure and Environment (NA-50) 2011 Annual Planning Summary for NNSA, Infrastructure and Environment (NA-50) The ongoing and projected Environmental Assessments and ...

  4. April Tribal Webinar on Energy Policy and Regulatory Environment...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    April Tribal Webinar on Energy Policy and Regulatory Environment Rescheduled for May 4 April Tribal Webinar on Energy Policy and Regulatory Environment Rescheduled for May 4 April ...

  5. Inspection of Environment, Safety, and Health Management at the...

    Office of Environmental Management (EM)

    Inspection of Environment, Safety, and Health Management at the Oak Ridge Operations Office and East Tennessee Technology Park - Volume I, May 2003 Inspection of Environment, ...

  6. STATE OF NEW MEXICO ENVIRONMENT DEPARTMENT IN THE MATTER OF:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Waste Act ("HWA"), the New Mexico Environment Department ("Department") hereby orders ... of this Order shall ensure continued protection of human health and the environment. ...

  7. Assistant Secretary for Environment, Safety and Health Endorses...

    Office of Environmental Management (EM)

    Assistant Secretary for Environment, Safety and Health Endorses VPP and VPPPA Annual Conference Assistant Secretary for Environment, Safety and Health Endorses VPP and VPPPA Annual ...

  8. IN THE MATTER OF: STATE OF NEW MEXICO ENVIRONMENT DEPARTMENT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IN THE MATTER OF: STATE OF NEW MEXICO ENVIRONMENT DEPARTMENT UNITED STATES DEPARTMENT ) ... Waste Act ("HWA"), the New Mexico Environment Department ("NMED") hereby orders the ...

  9. Inspection of Environment, Safety, and Health and Emergency Management...

    Office of Environmental Management (EM)

    Environment, Safety, and Health and Emergency Management at the Oak Ridge Operations Office and East Tennessee Technology Park, Summary Report, May 2003 Inspection of Environment, ...

  10. Material Testing of Coated Alloys in a Syngas Combustion Environment...

    Office of Scientific and Technical Information (OSTI)

    Material Testing of Coated Alloys in a Syngas Combustion Environment Year 6 - Activity ... Title: Material Testing of Coated Alloys in a Syngas Combustion Environment Year 6 - ...

  11. Changsha Huiming Environment Energy Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Changsha Huiming Environment Energy Co Ltd Jump to: navigation, search Name: Changsha Huiming Environment Energy Co Ltd Place: Changsha, Hunan Province, China Product:...

  12. CSU - Institute for the Built Environment | Open Energy Information

    Open Energy Info (EERE)

    Institute for the Built Environment Jump to: navigation, search Name: CSU - Institute for the Built Environment Address: 1000 Oval Drive Place: Fort Collins, Colorado Zip: 80523...

  13. Shanghai Nikki Environment System Inc | Open Energy Information

    Open Energy Info (EERE)

    Nikki Environment System Inc Jump to: navigation, search Name: Shanghai Nikki Environment System Inc Place: Shanghai, Shanghai Municipality, China Zip: 200040 Product: A biodiesel...

  14. Wujiang Oasis Environment Thermal Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Wujiang Oasis Environment Thermal Co Ltd Jump to: navigation, search Name: Wujiang Oasis Environment Thermal Co Ltd Place: Wujiang, Jiangsu Province, China Sector: Biomass Product:...

  15. Shanghai Environment and Energy Exchange | Open Energy Information

    Open Energy Info (EERE)

    Energy Exchange Jump to: navigation, search Name: Shanghai Environment and Energy Exchange Place: Shanghai Municipality, China Zip: 200083 Product: Trading platform for environment...

  16. Kunming Xinxingze Environment and Resource Industry Co Ltd |...

    Open Energy Info (EERE)

    Xinxingze Environment and Resource Industry Co Ltd Jump to: navigation, search Name: Kunming Xinxingze Environment and Resource Industry Co Ltd Place: Kunming, Yunnan Province,...

  17. The Center for Energy and the Environment | Open Energy Information

    Open Energy Info (EERE)

    Energy and the Environment Jump to: navigation, search Name: The Center for Energy and the Environment Place: Minneapolis, MN Information About Partnership with NREL Partnership...

  18. The Varberg Coalition for Energy and Environment | Open Energy...

    Open Energy Info (EERE)

    Varberg Coalition for Energy and Environment Jump to: navigation, search Name: The Varberg Coalition for Energy and Environment Place: Varberg, Sweden Zip: 43223 Product: String...

  19. Xinjiang Green Refreshing Angel Air Environment Co Ltd | Open...

    Open Energy Info (EERE)

    Refreshing Angel Air Environment Co Ltd Jump to: navigation, search Name: Xinjiang Green Refreshing Angel Air Environment Co Ltd Place: Urumqi, Xinjiang Autonomous Region, China...

  20. RAPID/Solar/Environment/California | Open Energy Information

    Open Energy Info (EERE)

    SolarEnvironmentCalifornia < RAPID | Solar | Environment Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk...

  1. German Federal Ministry for the Environment, Nature Conservation...

    Open Energy Info (EERE)

    Federal Ministry for the Environment, Nature Conservation and Nuclear Safety Jump to: navigation, search Logo: German Federal Ministry for the Environment, Nature Conservation and...

  2. Before the Subcommittee on Environment and the Economy -- House...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Environment and the Economy -- House Energy and Commerce Committee Before the Subcommittee on Environment and the Economy -- House Energy and Commerce Committee Testimony of Peter ...

  3. Inner Mongolia Huiquan Environment Protection Power Ltd | Open...

    Open Energy Info (EERE)

    Huiquan Environment Protection Power Ltd Jump to: navigation, search Name: Inner Mongolia Huiquan Environment Protection Power Ltd Place: Inner Mongolia Autonomous Region, China...

  4. Smith School of Enterprise and the Environment | Open Energy...

    Open Energy Info (EERE)

    School of Enterprise and the Environment Jump to: navigation, search Name: Smith School of Enterprise and the Environment Place: Oxford, England, United Kingdom Product: String...

  5. India-Legislation on Environment, Forests and Wildlife | Open...

    Open Energy Info (EERE)

    on Environment, Forests and Wildlife1 Overview "Category Name Water Pollution Air Pollution Environment Protection Coastal Regulation Zone Delegation of Powers...

  6. Events & Topics in Renewable Energy & the Environment | Photosynthetic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Events & Topics in Renewable Energy & the Environment Events & Topics in Renewable Energy & the Environment Tyson Living Learning Center tour November 18, 2014 - 4:00pm Tyson...

  7. Optimizing Radiation Protection of the Public and the Environment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Optimizing Radiation Protection of the Public and the Environment at the Department of Energy Optimizing Radiation Protection of the Public and the Environment at the Department of ...

  8. Events & Topics in Renewable Energy & the Environment | Photosynthetic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Events & Topics in Renewable Energy & the Environment Events & Topics in Renewable Energy & the Environment Donald Danforth Plant Science Center April 9, 2015 - 3:15pm Donald...

  9. Certificate in Renewable Energy and the Environment Forms | Photosynth...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Certificate in Renewable Energy and the Environment Forms Certificate in Renewable Energy and the Environment Forms Students interested in the certificate program should first...

  10. Institute of Renewable Energy and Environment IREE | Open Energy...

    Open Energy Info (EERE)

    Environment IREE Jump to: navigation, search Name: Institute of Renewable Energy and Environment (IREE) Place: Daegu, Daegu, Korea (Republic) Zip: 700-732 Sector: Renewable Energy...

  11. Long Term Environment and Economic Impacts of Coal Liquefaction...

    Office of Scientific and Technical Information (OSTI)

    Long Term Environment and Economic Impacts of Coal Liquefaction in China Citation Details In-Document Search Title: Long Term Environment and Economic Impacts of Coal Liquefaction ...

  12. Office of Environment, Safety and Health Assessments Protocol...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Environment, Safety and Health Assessments Protocol for Oversight Activities, December 2015 December 2015 Office of Environment, Safety and Health Assessments Protocol ...

  13. Office of Environment, Safety and Health Assessments Protocol...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Environment, Safety and Health Assessments Protocol for Required ... the Office of Environment, Safety and Health Assessments required reading program. ...

  14. Office of Environment, Safety and Health Assessments Protocol...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Environment, Safety and Health Assessments Protocol for the Development and ... (CRADs) used by the Office of Environment, Safety and Health Assessments (EA-30). ...

  15. Office of Environment, Safety and Health Assessments Protocol...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Environment, Safety and Health Assessments Protocol for Site Leads, April 2015 (Revision 1) - PROTOCOL - EA-31-01 April 2015 Office of Environment, Safety and Health ...

  16. RAPID/Geothermal/Environment/Federal | Open Energy Information

    Open Energy Info (EERE)

    GeothermalEnvironmentFederal < RAPID | Geothermal | Environment Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk...

  17. United Nations Environment Programme (UNEP) | Open Energy Information

    Open Energy Info (EERE)

    UNFCCC-Global Map-Annex 1 United Nations Environment Programme: Global Environment Outlook Add Tool UNEP Programs Agriculture Rural Energy Enterprise Development (AREED)...

  18. Investment Fund for Environment and Renewable Energy (FIDEME...

    Open Energy Info (EERE)

    Fund for Environment and Renewable Energy (FIDEME) Jump to: navigation, search Name Investment Fund for Environment and Renewable Energy (FIDEME) AgencyCompany Organization...

  19. LANL Space Environment Capability (Technical Report) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: LANL Space Environment Capability Citation Details In-Document Search Title: LANL Space Environment Capability Authors: Larsen, Brian Arthur 1 + Show Author ...

  20. UNEP Risoe Centre on Energy Environment and Sustainable Development...

    Open Energy Info (EERE)

    Risoe Centre on Energy Environment and Sustainable Development URC Jump to: navigation, search Name: UNEP Risoe Centre on Energy, Environment and Sustainable Development (URC)...

  1. Centre for Science and Environment | Open Energy Information

    Open Energy Info (EERE)

    Environment Jump to: navigation, search Name: Centre for Science and Environment Place: New Delhi, Delhi (NCT), India Zip: 110062 Product: A public interest research and advocacy...

  2. Energy Environment Business Services EEBS | Open Energy Information

    Open Energy Info (EERE)

    Environment Business Services EEBS Jump to: navigation, search Name: Energy & Environment Business Services (EEBS) Place: United Kingdom Zip: EC1M 5QP Product: Consultancy...

  3. Research Portfolio Report Small Producers: Environment and Water...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment and Water Management Cover image: Stored Wyoming Roll-out mats after unloading from truck. Research Portfolio Report Small Producers: Environment and Water Management ...

  4. Effects on the Physical Environment (Hydrodynamics, and Water...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Water Quality Food Web) Effects on the Physical Environment (Hydrodynamics, and Water Quality Food Web) Effects on the Physical Environment (Hydrodynamics, and Water Quality ...

  5. Nuclear astrophysics in a q-environment

    SciTech Connect (OSTI)

    Coraddu, M.; Quarati, P.; Scarfone, A. M.

    2007-12-06

    Fluctuations and dynamical collisions can be responsible of non standard distributions observed in many astrophysical environments or astrophysical plasmas. In fact, since Coulomb collisions are the means to achieve equilibrium, plasmas are typically not in global thermodynamic equilibrium. We examine three different and linked problems whose solution is needed to determine parameters concerning evolution through metastable states of stars and other astrophysical systems: role of temperature and density fluctuation, electron screening of nuclear reactions and penetrability, evolution and comparison of different collision frequencies to establish the degree of deviation from the global thermodynamic equilibrium usually assumed. We indicate how these problems should be treated in a generalized environment by means of the q-generalized statistics and evaluate the collision frequencies, confirming that deviations from a global equilibrium cannot be neglected in these systems.

  6. Iridium material for hydrothermal oxidation environments

    DOE Patents [OSTI]

    Hong, Glenn T.; Zilberstein, Vladimir A.

    1996-01-01

    A process for hydrothermal oxidation of combustible materials in which, during at least a part of the oxidation, corrosive material is present and makes contact with at least a portion of the apparatus over a contact area on the apparatus. At least a portion of the contact surface area comprises iridium, iridium oxide, an iridium alloy, or a base metal overlaid with an iridium coating. Iridium has been found to be highly resistant to environments encountered in the process of hydrothermal oxidation. Such environments typically contain greater than 50 mole percent water, together with oxygen, carbon dioxide, and a wide range of acids, bases and salts. Pressures are typically about 27.5 to about 1000 bar while temperatures range as high as 800.degree. C.

  7. Assessing the assessments: Pharmaceuticals in the environment

    SciTech Connect (OSTI)

    Enick, O.V. Moore, M.M.

    2007-11-15

    The relatively new issue of pharmaceutical contamination of the environment offers the opportunity to explore the application of values to the construction, communication and management of risk. The still-developing regulatory policies regarding environmental contamination with pharmaceuticals provide fertile ground for the introduction of values into the definition and management of risk. In this report, we summarize the current knowledge regarding pharmaceutical contamination of the environment and discuss specific attributes of pharmaceuticals that require special consideration. We then present an analysis showing that if values are incorporated into assessing, characterizing and managing risk, the results of risk assessments will more accurately reflect the needs of various stakeholders. Originating from an acknowledgement of the inherent uncertainty and value-laden nature of risk assessment, the precautionary principle (and later, the multi-criteria, integrated risk assessment), provides a direction for further research and policy development.

  8. Ceramic coating system or water oxidation environments

    DOE Patents [OSTI]

    Hong, Glenn T.

    1996-01-01

    A process for water oxidation of combustible materials in which during at least a part of the oxidation corrosive material is present and makes contact with at least a portion of the apparatus over a contact area on the apparatus. At least a portion of the contact surface area comprises titanium dioxide coated onto a titanium metal substrate. Such ceramic composites have been found to be highly resistant to environments encountered in the process of supercritical water oxidation. Such environments typically contain greater than 50 mole percent water, together with oxygen, carbon dioxide, and a wide range of acids, bases, and salts. Pressures are typically about 27.5 to about 1000 bar while temperatures range as high as 700.degree. C. The ceramic composites are also resistant to degradation mechanisms caused by thermal stresses.

  9. Temperature Control Diagnostics for Sample Environments

    SciTech Connect (OSTI)

    Santodonato, Louis J; Walker, Lakeisha MH; Church, Andrew J; Redmon, Christopher Mckenzie

    2010-01-01

    In a scientific laboratory setting, standard equipment such as cryocoolers are often used as part of a custom sample environment system designed to regulate temperature over a wide range. The end user may be more concerned with precise sample temperature control than with base temperature. But cryogenic systems tend to be specified mainly in terms of cooling capacity and base temperature. Technical staff at scientific user facilities (and perhaps elsewhere) often wonder how to best specify and evaluate temperature control capabilities. Here we describe test methods and give results obtained at a user facility that operates a large sample environment inventory. Although this inventory includes a wide variety of temperature, pressure, and magnetic field devices, the present work focuses on cryocooler-based systems.

  10. Authorization policy in a PKI environment

    SciTech Connect (OSTI)

    Thompson, Mary R.; Mudumbai, Srilekha S.; Essiari, Abdelilah; Chin, Willie

    2002-04-10

    The major emphasis of Public Key Infrastructure has been to provide a cryptographically secure means of authenticating identities. While there are a number of proposed standards for authorization structures and protocols based on X.509 or other key-based identities, none have been widely adopted. As part of an effort to use X.509 identities to provide authorization in highly distributed environments, we have developed and deployed an authorization service based on X.509 identified users and access policy contained in certificates signed by X.509 identified stakeholders. The major goal of this system, called Akenti, is to produce a usable authorization system for an environment consisting of distributed resources used by geographically and administratively distributed users.

  11. The Gulf War and the environment

    SciTech Connect (OSTI)

    El-Baz, F. (ed.) (Boston Univ., MA (United States). Center for Remote Sensing); Makharita, R.M. (ed.) (World Bank, Washington, DC (United States))

    1994-01-01

    The Gulf War inflicted dramatic environmental damage upon the fragile desert and shore environments of Kuwait and northeastern Saudi Arabia. Coastal and marine environments experienced oil spills of more than 8 million barrels, which killed wildlife and damaged the fishing industry. In inland Kuwait, hundreds of oil lakes are scattered across the desert surface: these lakes emit noxious gases, drown insects and birds, and may seep to pollute groundwater. Exploding and burning oil wells released soot particles, oil droplets, and noxious chemicals into the atmosphere, spreading air pollution, acid rain, and respiratory problems. Military diggings, constructions, and vehicles have destroyed much of the desert pavement, resulting in increased dust storms and large, moving dunes.

  12. Understanding the Energy Policy and Regulatory Environment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Understanding the Energy Policy and Regulatory Environment Douglas MacCourt Senior Policy Advisor Department of Energy, Office of Indian Energy Policy and Programs 2 Presentation Agenda * Regulatory and Policy Considerations o Legal Issues, Interconnection, permitting considerations, Clean Power Plan * Federal, State, & Utility Incentives o Net metering, Renewable Portfolio Standards, ITC * Tools 3 REGULATORY AND POLICY CONSIDERATIONS 4 Legal Issues Legal issues to consider in exploring your

  13. Grounding and shielding in the accelerator environment

    SciTech Connect (OSTI)

    Kerns, Q.

    1991-12-31

    Everyday features of the accelerator environment include long cable runs, high power and low level equipment sharing building space, stray electromagnetic fields and ground voltage differences between the sending and receiving ends of an installation. This paper pictures some Fermilab installations chosen to highlight significant features and presents practices, test methods and equipment that have been helpful in achieving successful shielding. Throughout the report are numbered statements aimed at summarizing good practices and avoiding pitfalls.

  14. STATEOFNEWMEXICO ENVIRONMENT DEPARTMENT ENVIRONMENTAL HEALTH DIVISION,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    STATEOFNEWMEXICO ENVIRONMENT DEPARTMENT ENVIRONMENTAL HEALTH DIVISION, HAZARDOUS WASTE BUREAU, Complainant UNITED STATES DEPARTMENT OF ENERGY, and NUCLEAR WASTE PARTNERSIDP, LLC Respondents WASTE ISOLATION PILOT PLANT EDDY COUNTY, NEW MEXICO ) ) ) ) ) ) ) ) ) ) ) ) ) Compliance Order No. HWB-14-21 ORDER GRANTING AN EXTENSION OF TIME TO FILE AN ANSWER AND REQUEST FOR HEARING Responde~ts United States Department of Energy and Nuclear Waste Partnership, LLC, on December 22, 2014, filed an unopposed

  15. China: A sleeping giant awakens to environment

    SciTech Connect (OSTI)

    Ni Shaoxiang

    1995-07-01

    This article discusses the approach the Chinese government is taking to environmental issues. Included are the following topics: pollution abatement; improved rural environment by curbing the production and use of highly toxic pesticides; limiting erosion; natural reserves. Problems awaiting solutions are also discussed: air pollution (particularly coal combustion); water pollution; solid-waste pollution; rural pollution; soil erosion; desertification; soil salinization; deforestation; grassland deterioration; natural disasters.

  16. Built Environment Analysis Tool: April 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Built Environment Analysis Tool April 2013 C. Porter Cambridge Systematics, Inc. Cambridge, Massachusetts NREL Technical Monitor: Laura Vimmerstedt Subcontract Report NREL/SR-6A20-58552 May 2013 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 15013 Denver West Parkway Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No.

  17. Corrosion of barrier materials in seawater environments

    SciTech Connect (OSTI)

    Heiser, J.H.; Soo, P.

    1995-07-01

    A brief review has been carried out on the performance of barrier materials for low-level radioactive wastes in seawater environments. The environments include those for shallower coastal waters as well as the deep ocean (down to 3800 m). The review is mainly focused on metallic materials since they are the most common for seawater service and they have the largest data base. Information from the literature is usually pertinent to shallower coastal locations, but there is a valuable source of corrosion data obtained from several studies of metallic specimens exposed to ocean-bed conditions. In addition, the corrosion of carbon steel barriers has been evaluated for actual waste containers that were retrieved from previously-used disposal sites in the Atlantic and Pacific Oceans. Of the metallic materials studied, carbon steel showed the least corrosion resistance. Failure by non-uniform attack in a typical waste container could occur in as little as 25 y in some ocean environments ` Penetration by local attack, such as pitting and crevice corrosion resistance was also observed for more expensive materials such as low-alloy steels, stainless steels, titanium alloys, zirconium alloys, copper alloys, nickel alloys, aluminum alloys, and lead alloys.

  18. Apparatus for observing a hostile environment

    DOE Patents [OSTI]

    Nance, Thomas A.; Boylston, Micah L.; Robinson, Casandra W.; Sexton, William C.; Heckendorn, Frank M.

    2000-01-01

    An apparatus is provided for observing a hostile environment, comprising a housing and a camera capable of insertion within the housing. The housing is a double wall assembly with an inner and outer wall with an hermetically sealed chamber therebetween. A housing for an optical system used to observe a hostile environment is provided, comprising a transparent, double wall assembly. The double wall assembly has an inner wall and an outer wall with an hermetically sealed chamber therebetween. The double wall assembly has an opening and a void area in communication with the opening. The void area of the housing is adapted to accommodate the optical system within said void area. An apparatus for protecting an optical system used to observe a hostile environment is provided comprising a housing; a tube positioned within the housing; and a base for supporting the housing and the tube. The housing comprises a double wall assembly having an inner wall and an outerwall with an hermetically sealed chamber therebetween. The tube is adapted to house the optical system therein.

  19. ENGINEERED BARRIER SYSTEM: PHYSICAL AND CHEMICAL ENVIRONMENT

    SciTech Connect (OSTI)

    R. Jarek

    2004-11-23

    The purpose of this report is to describe the evolution of the physical and chemical environmental conditions within the waste emplacement drifts of the repository, including the drip shield and waste package surfaces. The abstraction model is used in the total system performance assessment for the license application (TSPA LA) to assess the performance of the engineered barrier system and the waste form. This report develops and documents a set of these abstraction-level models that describe the engineered barrier system physical and chemical environment. Where possible, these models use information directly from other reports as input, which promotes integration among process models used for TSPA-LA. Specific tasks and activities of modeling the physical and chemical environment are included in ''Technical Work Plan for: Near-Field Environment and Transport In-Drift Geochemistry Model Report Integration'' (BSC 2004 [DIRS 171156], Section 1.2.2). As described in the technical work plan, the development of this report is coordinated with the development of other engineered barrier system reports.

  20. Engineered Barrier System: Physical and Chemical Environment

    SciTech Connect (OSTI)

    P. Dixon

    2004-04-26

    The conceptual and predictive models documented in this Engineered Barrier System: Physical and Chemical Environment Model report describe the evolution of the physical and chemical conditions within the waste emplacement drifts of the repository. The modeling approaches and model output data will be used in the total system performance assessment (TSPA-LA) to assess the performance of the engineered barrier system and the waste form. These models evaluate the range of potential water compositions within the emplacement drifts, resulting from the interaction of introduced materials and minerals in dust with water seeping into the drifts and with aqueous solutions forming by deliquescence of dust (as influenced by atmospheric conditions), and from thermal-hydrological-chemical (THC) processes in the drift. These models also consider the uncertainty and variability in water chemistry inside the drift and the compositions of introduced materials within the drift. This report develops and documents a set of process- and abstraction-level models that constitute the engineered barrier system: physical and chemical environment model. Where possible, these models use information directly from other process model reports as input, which promotes integration among process models used for total system performance assessment. Specific tasks and activities of modeling the physical and chemical environment are included in the technical work plan ''Technical Work Plan for: In-Drift Geochemistry Modeling'' (BSC 2004 [DIRS 166519]). As described in the technical work plan, the development of this report is coordinated with the development of other engineered barrier system analysis model reports.

  1. Calibration facility for environment dosimetry instruments

    SciTech Connect (OSTI)

    Bercea, Sorin; Celarel, Aurelia; Cenusa, Constantin

    2013-12-16

    In the last ten years, the nuclear activities, as well as the major nuclear events (see Fukushima accident) had an increasing impact on the environment, merely by contamination with radioactive materials. The most conferment way to quickly identify the presence of some radioactive elements in the environment, is to measure the dose-equivalent rate H. In this situation, information concerning the values of H due only to the natural radiation background must exist. Usually, the values of H due to the natural radiation background, are very low (∼10{sup −9} - 10{sup −8} Sv/h). A correct measurement of H in this range involve a performing calibration of the measuring instruments in the measuring range corresponding to the natural radiation background lead to important problems due to the presence of the natural background itself the best way to overlap this difficulty is to set up the calibration stand in an area with very low natural radiation background. In Romania, we identified an area with such special conditions at 200 m dept, in a salt mine. This paper deals with the necessary requirements for such a calibration facility, as well as with the calibration stand itself. The paper includes also, a description of the calibration stand (and images) as well as the radiological and metrological parameters. This calibration facilities for environment dosimetry is one of the few laboratories in this field in Europe.

  2. PHOTOVOLTAICS AND THE ENVIRONMENT 1998. REPORT ON THE WORKSHOP PHOTOVOLTAICS AND THE ENVIRONMENT 1999

    SciTech Connect (OSTI)

    FTHENAKIS,V.; ZWEIBEL,K.; MOSKOWITZ,P.

    1999-02-01

    The objective of the workshop ``Photovoltaics and the Environment'' was to bring together PV manufacturers and industry analysts to define EH and S issues related to the large-scale commercialization of PV technologies.

  3. Understanding the Energy Policy and Regulatory Environment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Understanding the Energy Policy & Regulatory Environment May 4, 2016 11:00 am - 12:30 PM MDT Tribal Energy Development Operation and Management Best Practices 2 Todays Presenters * Randy Manion Manion@wapa.gov * Doug MacCourt Douglas.Maccourt@hq.doe.gov * Sarai Geary, Sarai.geary@hq.doe.gov * Jana Ganion, jana.ganion@bluelakerancheria- nsn.gov * Theresa Cole, tcole@aha-nsn.gov 3 Questions * Answers to all questions submitted electronically during today's webinar will be posted on DOE's OIE

  4. Automated Knowledge Annotation for Dynamic Collaborative Environments

    SciTech Connect (OSTI)

    Cowell, Andrew J.; Gregory, Michelle L.; Marshall, Eric J.; McGrath, Liam R.

    2009-05-19

    This paper describes the Knowledge Encapsulation Framework (KEF), a suite of tools to enable automated knowledge annotation for modeling and simulation projects. This framework can be used to capture evidence (e.g., facts extracted from journal articles and government reports), discover new evidence (from similar peer-reviewed material as well as social media), enable discussions surrounding domain-specific topics and provide automatically generated semantic annotations for improved corpus investigation. The current KEF implementation is presented within a wiki environment, providing a simple but powerful collaborative space for team members to review, annotate, discuss and align evidence with their modeling frameworks.

  5. Power for peace, prosperity, and the environment

    SciTech Connect (OSTI)

    EAGAN,ROBERT J.; BAKER,ARNOLD B.; SANDERS,THOMAS L.

    2000-04-13

    The remarkable prosperity and standard of living enjoyed in the US is in large part linked to the use of energy. While high-energy use brings many benefits, it also causes environmental degradation. In the last decade, the potentially devastating effects of degradation of greenhouse gases have received worldwide attention. The tradeoff between sustaining a healthy environment and sustaining a healthy economy is a major challenge of the 21st century. In this paper, the authors explore some of the issues and focus particularly on the option of enhancing nuclear energy as a way to help sustain economic prosperity while decreasing pollution of the atmosphere.

  6. DNA Persistence in Sink Drain Environment

    SciTech Connect (OSTI)

    Winder, Eric M.; Bonheyo, George T.

    2015-07-31

    Biofilms are organized structures composed mainly of cells and extracellular polymeric substances produced by the constituent microorganisms. Ubiquitous in nature, biofilms have an innate ability to capture and retain passing material and may therefore act as natural collectors of contaminants or signatures of upstream activities. To determine the persistence and detectability of DNA passing through a sink drain environment, Bacillus anthracis strain Ames35 was cultured (6.35 x 107 CFU/mL), sterilized, and disposed of by addition to a sink drain apparatus with an established biofilm.

  7. Microclimate Corrosion Effects in Coastal Environments

    SciTech Connect (OSTI)

    Holcomb, G.R.; Covino, B.S. Jr.; Bullard, S.J.; Cramer, S.D.

    1996-03-24

    The Albany Research Center is conducting atmospheric corrosion research in coastal environments to improve the performance of materials in the Nation's infrastructure. The corrosion of bare metals, and of painted, thermal-sprayed, and galvanized steels are presented for one-year exposures at sites located on bridges and utility poles along the Oregon coast. The effects of microclimates (for example distance from the ocean, high wind zones, and salt-fog prone regions) are examined in conjunction with sample orientation and sheltered/unsheltered comparisons. An atmospheric corrosion model examines the growth and dissolution of corrosion product layers to arrive at a steady-state thickness and corrosion rate.

  8. Utility Locating in the DOE Environment

    SciTech Connect (OSTI)

    Clark Scott; Gail Heath

    2006-04-01

    Some advances have been made in utility locating in recent years and standards have been recently published to try and categorize the level of information known about the utility in the subsurface. At the same time some characterization about the level of effort or technology in the geophysicist approach to utility locating may be generalized. The DOE environment poses some added difficulties and this presentation covers these issues, costs and the technical approach that has been developed at the INEEL to prevent utility hits and how it fits into the generalized classification of effort.

  9. Uranium in the Savannah River Site environment

    SciTech Connect (OSTI)

    Evans, A.G.; Bauer, L.R.; Haselow, J.S.; Hayes, D.W.; Martin, H.L.; McDowell, W.L.; Pickett, J.B.

    1992-12-09

    The purpose of this report is to consolidate the history of environmental uranium studies conducted by SRS and to describe the status of uranium in the environment. The report is intended to be a living document'' that will be updated periodically. This draft issue, February 1992, documents studies that occurred from 1954 to 1989. Data in this report are taken primarily from annual and semiannual environmental reports for SRS. Semiannual reports were published from 1954 through 1962. Annual reports have been published since 1963. Occasionally unpublished data are included in this report for completeness.

  10. Uranium in the Savannah River Site environment

    SciTech Connect (OSTI)

    Evans, A.G.; Bauer, L.R.; Haselow, J.S.; Hayes, D.W.; Martin, H.L.; McDowell, W.L.; Pickett, J.B.

    1992-12-09

    The purpose of this report is to consolidate the history of environmental uranium studies conducted by SRS and to describe the status of uranium in the environment. The report is intended to be a ``living document`` that will be updated periodically. This draft issue, February 1992, documents studies that occurred from 1954 to 1989. Data in this report are taken primarily from annual and semiannual environmental reports for SRS. Semiannual reports were published from 1954 through 1962. Annual reports have been published since 1963. Occasionally unpublished data are included in this report for completeness.

  11. Robot Independent Programming Environment and Language

    Energy Science and Technology Software Center (OSTI)

    1995-04-05

    RIPE is an object-oriented approach to robot system architectures; it is a software environment which facilitates rapid design and implementation of complex robot systems for diverse applications. The robot work cell is modeled using software objects and supports model-based automated programming of robotic and machining devices, real-time sensor-based control, error handling, robust communications and graphical interfaces for robot system control. The objects include robots, sensors, end effectors, workpieces, NC machines and various other devices. Amore » set of generic classes is defined to represent these objects, and the interfaces to them become RIPL.« less

  12. Micro/nanofabricated environments for synthetic biology

    SciTech Connect (OSTI)

    Collier, Pat [ORNL; Simpson, Michael L [ORNL

    2011-01-01

    A better understanding of how confinement, crowding and reduced dimensionality modulate reactivity and reaction dynamics will aid in the rational and systematic discovery of functionality in complex biological systems. Artificial micro- and nanofabricated structures have helped elucidate the effects of nanoscale spatial confinement and segregation on biological behavior, particularly when integrated with microfluidics, through precise control in both space and time of diffusible signals and binding interactions. Examples of nanostructured interfaces for synthetic biology include the development of cell-like compartments for encapsulating biochemical reactions, nanostructured environments for fundamental studies of diffusion, molecular transport and biochemical reaction kinetics, and regulation of biomolecular interactions as functions of micro- and nanofabricated topological constraints.

  13. Environment, Safety and Health (ESH) Goals

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-08-02

    The purpose of this Policy is to establish Environment, Safety and Health (ES&H) goals for Department of Energy (DOE) personnel and its contractors. These goals are designed to establish Departmental ES&H expectations for: 1) DOE and contractor personnel ES&H behaviors and attitudes in the conduct of their daily work activities, and 2) operational performance regarding worker injuries and illnesses, regulatory enforcement actions, and environmental releases. Cancels DOE P 450.1, DOE P 450.6. Canceled by DOE O 450.4A

  14. Indoor environment program. 1994 annual report

    SciTech Connect (OSTI)

    Daisey, J.M.

    1995-04-01

    Buildings use approximately one-third of the energy consumed in the United States. The potential energy savings derived from reduced infiltration and ventilation in buildings are substantial, since energy use associated with conditioning and distributing ventilation air is about 5.5 EJ per year. However, since ventilation is the dominant mechanism for removing pollutants from indoor sources, reduction of ventilation can have adverse effects on indoor air quality, and on the health, comfort, and productivity of building occupants. The Indoor Environment Program in LBL`s Energy and Environment Division was established in 1977 to conduct integrated research on ventilation, indoor air quality, and energy use and efficiency in buildings for the purpose of reducing energy liabilities associated with airflows into, within, and out of buildings while maintaining or improving occupant health and comfort. The Program is part of LBL`s Center for Building Science. Research is conducted on building energy use and efficiency, ventilation and infiltration, and thermal distribution systems; on the nature, sources, transport, transformation, and deposition of indoor air pollutants; and on exposure and health risks associated with indoor air pollutants. Pollutants of particular interest include radon; volatile, semivolatile, and particulate organic compounds; and combustion emissions, including environmental tobacco smoke, CO, and NO{sub x}.

  15. A colalborative environment for information driven safeguards

    SciTech Connect (OSTI)

    Scott, Mark R; Michel, Kelly D

    2010-09-15

    For two decades, the IAEA has recognized the need for a comprehensive and strongly integrated Knowledge Management system to support its Information Driven Safeguards activities. In the past, plans for the development of such a system have progressed slowly due to concerns over costs and feasibility. In recent years, Los Alamos National Laboratory has developed a knowledge management system that could serve as the basis for an IAEA Collaborative Environment (ICE). The ICE derivative knowledge management system described in this paper addresses the challenge of living in an era of information overload coupled with certain knowledge shortfalls. The paper describes and defines a system that is flexible, yet ensures coordinated and focused collaboration, broad data evaluation capabilities, architected and organized work flows, and improved communications. The paper and demonstration of ICE will utilize a hypothetical scenario to highlight the functional features that facilitate collaboration amongst and between information analysts and inspectors. The scenario will place these two groups into a simulated planning exercise for a safeguards inspection drawing upon past data acquisitions, inspection reports, analyst conclusions, and a coordinated walk-through of a 3-D model of the facility. Subsequent to the conduct of the simulated facility inspection, the detection of an anomaly and pursuit of follow up activities will illustrate the event notification, information sharing, and collaborative capabilities of the system. The use of a collaborative environment such as ICE to fulfill the complicated knowledge management demands of the Agency and facilitate the completion of annual State Evaluation Reports will also be addressed.

  16. Indoor environment program - 1995 annual report

    SciTech Connect (OSTI)

    Daisey, J.M.

    1996-06-01

    Buildings use approximately one-third of the energy consumed in the United States. The potential energy savings derived from reduced infiltration and ventilation in buildings are substantial, since energy use associated with conditioning and distributing ventilation air is about 5.5 EJ per year. However, since ventilation is the dominant mechanism for removing pollutants from indoor sources, reduction of ventilation can have adverse effects on indoor air quality, and on the health, comfort, and productivity of building occupants. The Indoor Environment Program in LBL`s Energy and Environment Division was established in 1977 to conduct integrated research on ventilation, indoor air quality, and energy use and efficiency in buildings for the purpose of reducing energy liabilities associated with airflows into, within, and out of buildings while maintaining or improving occupant health and comfort. The Program is part of LBL`s Center for Building Science. Research is conducted on building energy use and efficiency, ventilation and infiltration, and thermal distribution systems; on the nature, sources, transport, transformation, and deposition of indoor air pollutants; and on exposure and health risks associated with indoor air pollutants. Pollutants of particular interest include radon; volatile, semivolatile, and particulate organic compounds; and combustion emissions, including environmental tobacco smoke, CO, and NO{sub x}.

  17. Energy and the Environment: Volume 24

    SciTech Connect (OSTI)

    Socolow, R.H.

    1999-07-01

    The 24 papers in this volume are entitled: The art of energy efficiency--Protecting the environment with better technology; On the road to global ecology; Best practices for renewable energy implementation--Integrating end-user and commercial-sector opportunities and constraints; Biomass conversion to fuels; Changing trends in greenhouse gases other than carbon dioxide; Economic growth, liberalization, and the environment--A review of the evidence; Harmful algal blooms--A model for emergence of pathogenic microorganisms under conditions of ecological stress; Enhancing the performance of nuclear power reactors--Issues and opportunities; Environmental issues along the US-Mexico border--Drivers of change and the response of citizens and institutions; Ethics and international business; Fuel cells; High-level nuclear waste--The status of Yucca Mountain; Hydrogen production, transmission, and distribution; It's not easy being green--Innovative environmental technologies enhance hydropower's role in sustainable development; Megacities and the atmosphere; Methods for attributing ambient air pollutants to emission sources; Nuclear energy in the twenty-first century--Examination of a contentious subject; Pollution and human health in the St. Lawrence estuary; Southern perspectives in technology transfer; The post-Kyoto regime on climate change--Southern perspectives; Flexibility in the timing and mechanisms of greenhouse gas controls--A review of economic arguments; How much is energy R and D worth as insurance; A review of technical change in assessments of climate policy; and Energy technology and global change--Modeling techniques developed at NASA.

  18. Geotoxic materials in the surface environment

    SciTech Connect (OSTI)

    Koranda, J.J.; Cohen, J.J.; Smith, C.F.; Ciminesi, F.J.

    1981-12-07

    The toxicology and natural occurrence of several recognized geotoxic elements including arsenic, cadmium, chromium, nickel, lead, selenium, uranium, and vanadium is reviewed. The behavior of these elements in the environment and in biological systems is examined. The properties of these eight toxic elements are summarized and presented in a toxicity matrix. The toxicity matrix identifies each of the elements in terms of average crustal abundance, average soil concentration, drinking water standards, irrigation water standards, daily human intake, aquatic toxicity, phytotoxicity, mammalian toxicity, human toxicity, and bioaccumulation factors for fish. Fish are the major aquatic environment contribution to the human diet and bioaccumulation in aquatic ecosystems has been demonstrated to be an important factor in the cycling of elements in aquatic ecosystems. The toxicity matrix is used as a first approximation to rank the geotoxicity of elements for the purpose of focusing future efforts. The ranking from highest to lowest toxicity with respect to the toxicity parameters being discussed is as follows: arsenic, cadmium, lead, selenium, chromium, vanadium, nickel, and uranium.

  19. ENGINEERED BARRIER SYSTEM: PHYSICAL AND CHEMICAL ENVIRONMENT

    SciTech Connect (OSTI)

    R. Jarek

    2005-08-29

    The purpose of this model report is to describe the evolution of the physical and chemical environmental conditions within the waste emplacement drifts of the repository, including the drip shield and waste package surfaces. The resulting seepage evaporation and gas abstraction models are used in the total system performance assessment for the license application (TSPA-LA) to assess the performance of the engineered barrier system and the waste form. This report develops and documents a set of abstraction-level models that describe the engineered barrier system physical and chemical environment. Where possible, these models use information directly from other reports as input, which promotes integration among process models used for TSPA-LA. Specific tasks and activities of modeling the physical and chemical environment are included in ''Technical Work Plan for: Near-Field Environment and Transport In-Drift Geochemistry Model Report Integration'' (BSC 2005 [DIRS 173782], Section 1.2.2). As described in the technical work plan, the development of this report is coordinated with the development of other engineered barrier system reports. To be consistent with other project documents that address features, events, and processes (FEPs), Table 6.14.1 of the current report includes updates to FEP numbers and FEP subjects for two FEPs identified in the technical work plan (TWP) governing this report (BSC 2005 [DIRS 173782]). FEP 2.1.09.06.0A (Reduction-oxidation potential in EBS), as listed in Table 2 of the TWP (BSC 2005 [DIRS 173782]), has been updated in the current report to FEP 2.1.09.06.0B (Reduction-oxidation potential in Drifts; see Table 6.14-1). FEP 2.1.09.07.0A (Reaction kinetics in EBS), as listed in Table 2 of the TWP (BSC 2005 [DIRS 173782]), has been updated in the current report to FEP 2.1.09.07.0B (Reaction kinetics in Drifts; see Table 6.14-1). These deviations from the TWP are justified because they improve integration with FEPs documents. The updates

  20. The Multiphysics Object Oriented Simulation Environment

    Energy Science and Technology Software Center (OSTI)

    2010-05-01

    MOOSE is a software framework for the development of complex multidimensional engineering analysis applications using the finite element method. It provides a clean, extensible interface for scientists to develop analysis applications by accepting weak forms (i.e., virtual work expressions) of the mathematical models that govern the behavior of the physical system being modeled. MOOSE provides spatial and temporal discretization support for these expressions and allows them to be coupled in general ways and with generalmore » boundary and initial conditions and constraints. MOOSE also provides a solution environment that allows the parallel solution of the described problem on computer systems ranging from one processor to massively parallel systems.« less

  1. Indoor Environment Program 1990 annual report

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    Approximately 38% of the energy consumed in the United States is used in buildings. Because humans spend an average of 85% to 90% of their time indoors, energy usage by the buildings sector can have a significant impact on human comfort, health and productivity. To advance energy conservation technologies while maintaining indoor air quality, research in the Indoor Environment Program (IEP) is directed toward understanding relations between building energy (usage and technologies), indoor air quality, and human health, comfort and productivity. The IEP addresses the issue of optimizing the health, comfort and productivity of a building's occupants while maintaining the building's energy efficiency. However, because ventilation is the dominant mechanism for removing pollutants with indoor sources, reduced ventilation may produce undesirable effects on indoor air quality and on the health, comfort, and productivity of a building's occupants. This issue is an important theme for the research of other research groups and projects within IEP.

  2. Indoor Environment Program 1990 annual report

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    Approximately 38% of the energy consumed in the United States is used in buildings. Because humans spend an average of 85% to 90% of their time indoors, energy usage by the buildings sector can have a significant impact on human comfort, health and productivity. To advance energy conservation technologies while maintaining indoor air quality, research in the Indoor Environment Program (IEP) is directed toward understanding relations between building energy (usage and technologies), indoor air quality, and human health, comfort and productivity. The IEP addresses the issue of optimizing the health, comfort and productivity of a building`s occupants while maintaining the building`s energy efficiency. However, because ventilation is the dominant mechanism for removing pollutants with indoor sources, reduced ventilation may produce undesirable effects on indoor air quality and on the health, comfort, and productivity of a building`s occupants. This issue is an important theme for the research of other research groups and projects within IEP.

  3. Introduction to Cyber Technologies exercise environment

    SciTech Connect (OSTI)

    2014-12-17

    Exercise environment for Introduction to Cyber Technologies class. This software is essentially a collection of short scripts, configuration files, and small executables that form the exercise component of the Sandia Cyber Technologies Academy?s Introduction to Cyber Technologies class. It builds upon other open-source technologies, such as Debian Linux and minimega, to provide comprehensive Linux and networking exercises that make learning these topics exciting and fun. Sample exercises: a pre-built set of home directories the student must navigate through to learn about privilege escalation, the creation of a virtual network playground designed to teach the student about the resiliency of the Internet, and a two-hour Capture the Flag challenge for the final lesson. There are approximately thirty (30) exercises included for the students to complete as part of the course.

  4. Global environment protection strategy through thermal engineering

    SciTech Connect (OSTI)

    Hatta, K. ); Mori, Y. )

    1992-01-01

    This book contains papers from the final report of the research subcommittee in the thermal engineering division of the Japan Society of Mechanical Engineers. Due to the difficulty of determining nationwide countermeasures by governmental committees and the likelihood of unmanageable or uncooperative inter-governmental committees in the face of deteriorating environmental conditions, the subcommittee started its activities to develop concrete countermeasures for protecting the global environment. The subcommittee had several advantages such as not being influenced by external pressures and interferences, so that it could proceed with discussion from a purely academic and technical standpoint. The subcommittee members have made a concerted effort to report their research results and get them published, in contrast with international or national committees on environmental problems, which have served mainly as commentators and general reviewers. This book explains and proposes a strategy which includes the countermeasures and methodologies that the subcommittee obtained.

  5. Deuteron-induced fusion in various environments

    SciTech Connect (OSTI)

    Hale, G.M.; Talley, T.L.

    1994-04-01

    The theory of deuteron-induced fusion will be discussed, first in free space, then in muonic molecules where the Coulomb repulsion is highly screened. It will be shown how a consistent description of the d + t reactions can be obtained in these environments using R-matrix theory. We compare fusion rates obtained from the time-dependent scattering theory with those implied by the partial widths of the resonance associated with muon-catalyzed d-t fusion. Finally, some speculative comments are made about how the d + d reactions might proceed in other media, such as metallic lattices. The unusual properties of states associated with ``shadow`` poles might account for some of the strange results seen in cold fusion experiments. We emphasize that the same methods can, and should, be used to describe this situation as well as the other two well-established phenomena.

  6. Environment, Safety, and Health Reporting Notice

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-01-15

    To set forth the requirements and responsibilities for Department of Energy (DOE) elements, including the National Nuclear Security Administration (NNSA), for preparation of annual summary reports to the Secretary of Energy on the results of environment, safety, and health (ES&H) assessments conducted in the previous year. To implement the revised requirements of Title 29 Code of Federal Regulations (CFR) Part 1904, "Recording and Reporting Occupational Injuries and Illnesses," within DOE, including NNSA. Cancels Paragraphs 2a, 2a(1), 2a(2), 2b, 2b(1), 2b(2), and 2i(3)(a) through 2i(3)(d) of Chapter II and Appendix A of DOE M 231.1-1. DOE N 231.2 extends this Notice until 1-15-2004. Cancels: DOE M 231.1-1. in part.

  7. Improving the environment in urban areas

    SciTech Connect (OSTI)

    Adamkus, V.V.

    1994-12-31

    The author discusses the need for improvements to the environment in urban areas, and efforts being made under the direction of the Environmental Protection Agency (EPA) to address these problems. The impact the new Clean Air Act can have on emissions from gasoline powered autos, diesel burning trucks, fixed emission sources ranging from utilities to chemical plants, and consumer products like hair sprays and charcoal starters, will all work together to improve air quality in urban areas. The author also discusses Brownfields Economic Redevelopment Plan efforts being supported by the EPA in a coordinated plan to get municipalities involved in cleaning up areas with pollution, to remove the blight on the urban areas, provide new land for development, and promote additional jobs.

  8. Introduction to Cyber Technologies exercise environment

    Energy Science and Technology Software Center (OSTI)

    2014-12-17

    Exercise environment for Introduction to Cyber Technologies class. This software is essentially a collection of short scripts, configuration files, and small executables that form the exercise component of the Sandia Cyber Technologies Academy’s Introduction to Cyber Technologies class. It builds upon other open-source technologies, such as Debian Linux and minimega, to provide comprehensive Linux and networking exercises that make learning these topics exciting and fun. Sample exercises: a pre-built set of home directories the studentmore » must navigate through to learn about privilege escalation, the creation of a virtual network playground designed to teach the student about the resiliency of the Internet, and a two-hour Capture the Flag challenge for the final lesson. There are approximately thirty (30) exercises included for the students to complete as part of the course.« less

  9. Liquid salt environment stress-rupture testing

    DOE Patents [OSTI]

    Ren, Weiju; Holcomb, David E.; Muralidharan, Govindarajan; Wilson, Dane F.

    2016-03-22

    Disclosed herein are systems, devices and methods for stress-rupture testing selected materials within a high-temperature liquid salt environment. Exemplary testing systems include a load train for holding a test specimen within a heated inert gas vessel. A thermal break included in the load train can thermally insulate a load cell positioned along the load train within the inert gas vessel. The test specimen can include a cylindrical gage portion having an internal void filled with a molten salt during stress-rupture testing. The gage portion can have an inner surface area to volume ratio of greater than 20 to maximize the corrosive effect of the molten salt on the specimen material during testing. Also disclosed are methods of making a salt ingot for placement within the test specimen.

  10. Motto: We work for people and environment

    SciTech Connect (OSTI)

    Barcik, M.

    1995-12-31

    This target has been under Danfoss realization for over 60 years, both in Denmark and all over the world. The operational range of the enterprise: is very wide. Danfoss manufactures a large assortment of products, starting from heat automatic control systems, through heat metering devices, industrial and refrigeration automatic control, compressors, flow meters, frequency converters, control systems, and monitoring. The four mainstays of the business activity are based on: high quality products; advanced manufacturing technology; care of the environment, and engagement of the staff. Since 1992 Danfoss has been manufacturing heat radiator thermostats in Poland. A unique solution - namely the use of a gas thermostatic head secures the highest energy savings and operational reliability. In 1993, Danfoss as the sixth company in Poland and the first in its business field, gained a ISO 9002 certificate.