Powered by Deep Web Technologies
Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Test Procedure for 170.302.h Incorporate Laboratory Test Results APPROVED Version 1.1 September 24, 2010  

E-Print Network (OSTI)

Test Procedure for §170.302.h Incorporate Laboratory Test Results APPROVED Version 1.1 September 24, 2010 1 Test Procedure for §170.302 (h) Incorporate Laboratory Test Results This document describes the test procedure for evaluating conformance of complete EHRs or EHR modules1

2

Test Laboratory Instructions (Updated 2/12)  

E-Print Network (OSTI)

Test Laboratory Instructions (Updated 2/12) In California, manufacturers of State- and federally Energy Commission (Energy Commission). This reported data must come from an approved test laboratory performing the test procedure prescribed by law for the appliance. These instructions will walk you through

3

Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

AOCS provides a Laboratory Proficiency Program (LPP). Formerly the Smalley Check Sample Program LPP is a collaborative proficiency testing service for oil and fat related commodities, oilseeds, oilseed meals, and edible fats. Laboratory Proficiency Testing

4

Leading Testing Laboratories  

Science Conference Proceedings (OSTI)

... Fax: 86-20-6196-8925 E-Mail: york.li@ledtestlab.com Send E-Mail to Laboratory: Leading Testing Laboratories ... [22/S14] EPA Integral LED Lamps v ...

2013-09-06T23:59:59.000Z

5

Laboratory Corrosion Tests  

Science Conference Proceedings (OSTI)

Table 2   Laboratory corrosion tests...Salt spray test NaCl solution Ocean climate Acetic acid salt spray test NaCl + CH 3 COOH Salted roads Copper-accelerated acetic acid salt spray test As in acetic acid salt spray test As in acetic acid salt spray test, but more aggressive Immersion tests Artificial sweat test ? Wearing of decorative...

6

Fumonisin Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for B1, B2, B3,and total Fumonisin in corn meal samples. Fumonisin Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP) aocs applicants certified chemist chemists Lab laboratories Laboratory methods

7

CERTS Microgrid Laboratory Test Bed  

NLE Websites -- All DOE Office Websites (Extended Search)

CERTS Microgrid Laboratory Test Bed Title CERTS Microgrid Laboratory Test Bed Publication Type Report Year of Publication 2010 Authors Lasseter, Robert H., Joseph H. Eto, Ben...

8

Aflatoxin Test Kit Laboratory Proficiency Testing  

Science Conference Proceedings (OSTI)

Lab proficiency testing for Aflatoxin test kit to determine Total Aflatoxins.Samples include Peanut Paste, Corn Meal, Milk. Aflatoxin Test Kit Laboratory Proficiency Testing Laboratory Proficiency Program (LPP) aocs applicants certified chemist chemists

9

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

CERTS Microgrid Laboratory Test Bed R. H. Lasseter, Fellow,play functionality. The tests demonstrated stable behaviorin an autonomous manner. All tests performed as expected and

Lasseter, R. H.

2010-01-01T23:59:59.000Z

10

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

Diagram of CERTS Microgrid Test Bed Figure 3. Tecogen PrimeCERTS Microgrid Laboratory Test Bed. (California EnergyFigure 1. CERTS Microgrid Test Bed at American Electric

ETO, J.

2010-01-01T23:59:59.000Z

11

Cottonseed Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab proficiency testing for Cottonseed. Determinations include Free Fatty Acids, Foreign Matter, Moisture,Nitrogen,Oil. Cottonseed Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP) aocs applicants certified chemist chemists Lab

12

Aflatoxin Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing for Aflatoxin. Samples include Peanut Butter, Peanut Paste, Cottonseed Meal, Corn Meal, Milk, Pistachio and Almond, Aflatoxins B1, B2, G1, and G2 Aflatoxin Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP)

13

Cholesterol Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing for Cholesterol. Samples Dried Meats, Dried Egg, and Cheese Powder. Method AOAC 994.10 Cholesterol Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP) aocs applicants certified chemist chemists Lab laborato

14

Peanut Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Peanuts to determine Free Fatty Acids, Foreign Matter, Moisture, Oil, Nitrogen. Peanut Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP) aocs applicants certified chemist chemists Lab laborat

15

Soybeans Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for determining Free Fatty Acids, Moisture, Nitrogen, Oil, and Crude Fiber in Soybeans. Soybeans Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP) aocs applicants certified chemist chemists Lab la

16

DOE Approves Field Test for Promising Carbon Capture Technology |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Approves Field Test for Promising Carbon Capture Technology Approves Field Test for Promising Carbon Capture Technology DOE Approves Field Test for Promising Carbon Capture Technology November 20, 2012 - 12:00pm Addthis Washington, DC - A promising post combustion membrane technology that can separate and capture 90 percent of the carbon dioxide (CO2) from a pulverized coal plant has been successfully demonstrated and received Department of Energy (DOE) approval to advance to a larger-scale field test. In an $18.75 million project funded by the American Recovery and Reinvestment Act of 2009, Membrane Technology and Research Inc. (MTR) and its partners tested the Polaris™ membrane system, which uses a CO2-selective polymeric membrane (micro-porous films which act as semi-permeable barriers to separate two different mediums) material and

17

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

Diagram of CERTS Microgrid Test Bed Figure 3. Tecogen Prime2009 CERTS Microgrid Laboratory Test Bed J. ETO, Lawrenceof the CERTS Microgrid Test Bed project was to enhance the

Eto, Joe

2009-01-01T23:59:59.000Z

18

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

Line Diagram of CERTS Microgrid Test Bed Figure 3. TecogenCALGARY 2009 CERTS Microgrid Laboratory Test Bed J. ETO,The objective of the CERTS Microgrid Test Bed project was to

Eto, Joe

2009-01-01T23:59:59.000Z

19

Approved Test Procedures Version 1.1 Release Notes  

E-Print Network (OSTI)

Approved Test Procedures Version 1.1 Release Notes 1 Change Reason for Change 302.a drugdrug, drug allergy In the Informative Test Description section Added clarification to the example. 302.c Problem List In the Informative Test Description section Added the sentence "The test also

20

Laboratory Proficiency Testing Series  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing (LPP), Aflatoxin, Aflatoxin Test Kit, Peanut Paste and Corn Meal, Biodiesel Feedstock, Cholesterol, Cottonseed, Cottonseed Oil, Edibile Fat, Feed Microscopy, Fish Meal, Fumonisin, Gas Chromatography, Gentically Modified Organism, G

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Retlif Testing Laboratories  

Science Conference Proceedings (OSTI)

... of radio disturbance characteristics of electrical motor-operated and ... and Test Procedures for Airborne Equipment - Section 15 - Magnetic Effect. ...

2014-01-03T23:59:59.000Z

22

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

Line Diagram of CERTS Microgrid Test Bed Figure 3. TecogenRoy, N. Lewis. 2008. CERTS Microgrid Laboratory Test Bed. (Energy Resources: The MicroGrid Concept. (Lawrence Berkeley

ETO, J.

2010-01-01T23:59:59.000Z

23

Characterization of spent fuel approved testing material: ATM-106  

Science Conference Proceedings (OSTI)

The characterization data obtained to date are described for Approved Testing Material (ATM)-106 spent fuel from Assembly BT03 of pressurized-water reactor Calvert Cliffs No. 1. This report is one in a series being prepared by the Materials Characterization Center at Pacific Northwest Laboratory on spent fuel ATMs. The ATMs are receiving extensive examinations to provide a source of well- characterized spent fuel for testing in the US Department of Energy Office of Civilian Radioactive Waste Management (OCWRM) program. ATM-106 consists of 20 full-length irradiated fuel rods with rod-average burnups of about 3700 GJ/kgM (43 MWd/kgM) and expected fission gas release of /approximately/10%. Characterization data include (1) as-fabricated fuel design, irradiation history, and subsequent storage and handling; (2) isotopic gamma scans; (3) fission gas analyses; (4) ceramography of the fuel and metallography of the cladding; (5) calculated nuclide inventories and radioactivities in the fuel and cladding; and (6) radiochemical analyses of the fuel and cladding. Additional analyses of the fuel rod are being conducted and will be included in planned revisions of this report. 12 refs., 110 figs., 81 tabs.

Guenther, R.J.; Blahnik, D.E.; Campbell, T.K.; Jenquin, U.P.; Mendel, J.E.; Thornhill, C.K.

1988-10-01T23:59:59.000Z

24

Characterization of spent fuel approved testing material---ATM-105  

Science Conference Proceedings (OSTI)

The characterization data obtained to data are described for Approved Testing Material 105 (ATM-105), which is spent fuel from Bundles CZ346 and CZ348 of the Cooper Nuclear Power Plant, a boiling-water reactor. This report is one in a series being prepared by the Materials Characterization Center at Pacific Northwest Laboratory (PNL) on spent fuel ATMs. The ATMs are receiving extensive examinations to provide a source of well-characterized spent fuel for testing in the US Department of Energy Office of Civilian Radioactive Waste Management (OCRWM) Program. ATM-105 consists of 88 full-length irradiated fuel rods with rod-average burnups of about 2400 GJ/kgM (28 MWd/kgM) and expected fission gas release of about 1%. Characterization data include (1) descriptions of as-fabricated fuel design, irradiation history, and subsequent storage and handling; (2) isotopic gamma scans; (3) fission gas analyses; (4) ceramography of the fuel and metallography of the cladding; (5) special fuel studies involving analytical transmission electron microscopy (AEM); (6) calculated nuclide inventories and radioactivities in the fuel and cladding; and (7) radiochemical analyses of the fuel and cladding. Additional analyses of the fuel are being conducted and will be included in planned revisions of this report.

Guenther, R.J.; Blahnik, D.E.; Campbell, T.K.; Jenquin, U.P.; Mendel, J.E.; Thomas, L.E.; Thornhill, C.K.

1991-12-01T23:59:59.000Z

25

Characterization of spent fuel approved testing material--ATM-104  

SciTech Connect

The characterization data obtained to date are described for Approved Testing Material 104 (ATM-104), which is spent fuel from Assembly DO47 of the Calvert Cliffs Nuclear Power Plant (Unit 1), a pressurized-water reactor. This report is one in a series being prepared by the Materials Characterization Center at Pacific Northwest Laboratory (PNL) on spent fuel ATMs. The ATMs are receiving extensive examinations to provide a source of well-characterized spent fuel for testing in the US Department of Energy Office of Civilian Radioactive Waste Management (OCRWM) Program. ATM-104 consists of 128 full-length irradiated fuel rods with rod-average burnups of about 42 MWd/kgM and expected fission gas release of about 1%. A variety of analyses were performed to investigate cladding characteristics, radionuclide inventory, and redistribution of fission products. Characterization data include (1) fabricated fuel design, irradiation history, and subsequent storage and handling history; (2) isotopic gamma scans; (3) fission gas analyses; (4) ceramography of the fuel and metallography of the cladding; (5) special fuel studies involving analytical transmission electron microscopy (AEM) and electron probe microanalyses (EPMA); (6) calculated nuclide inventories and radioactivities in the fuel and cladding; and (7) radiochemical analyses of the fuel and cladding.

Guenther, R.J.; Blahnik, D.E.; Jenquin, U.P.; Mendel, J.E.; Thomas, L.E.; Thornhill, C.K.

1991-12-01T23:59:59.000Z

26

Phosphorus in Oil Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Laboratory Proficiency Testing service for Phosphorus in soybean oil Phosphorus in Oil Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP) aocs applicants certified chemist chemists Lab laboratories Laboratory methods oils profici

27

Laboratory Proficiency Testing Program Award Winners  

Science Conference Proceedings (OSTI)

Proficiency testing labs or laboratories awarded by AOCS. Laboratory Proficiency Testing Program Award Winners Laboratory Proficiency Program (LPP) aocs applicants certified chemist chemists Lab laboratories Laboratory methods oils proficiency reference

28

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

on Power Delivery CERTS Microgrid Laboratory Test Bed R. H.and J. Roy Abstract--. CERTS Microgrid concept captures theas a subsystem or a microgrid. The sources can operate in

Lasseter, R. H.

2010-01-01T23:59:59.000Z

29

Idaho National Laboratory Advanced Test Reactor Probabilistic...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Idaho National Laboratory Advanced Test Reactor Probabilistic Risk Assessment Idaho National Laboratory Advanced Test Reactor Probabilistic Risk Assessment September 19, 2012...

30

Improving Clinical Laboratory Testing through Harmonization ...  

Science Conference Proceedings (OSTI)

... involvement in harmonizing this category of clinical laboratory testing procedures. ... patients at risk from non-standardized laboratory test results and ...

2013-05-21T23:59:59.000Z

31

CERTS Microgrid Laboratory Test Bed  

NLE Websites -- All DOE Office Websites (Extended Search)

CERTS Microgrid Laboratory Test Bed CERTS Microgrid Laboratory Test Bed Title CERTS Microgrid Laboratory Test Bed Publication Type Journal Article LBNL Report Number LBNL-3553E Year of Publication 2011 Authors Lasseter, Robert H., Joseph H. Eto, Ben Schenkman, John Stevens, Harry T. Volkommer, David Klapp, Ed Linton, Hector Hurtado, and Joyashree Roy Journal IEEE Transactions on Power Delivery Volume 26 Start Page 325 Issue 1 Date Published 01/2011 Keywords distributed energy resources (der) Abstract CERTS Microgrid concept captures the emerging potential of distributed generation using a system approach. CERTS views generation and associated loads as a subsystem or a "microgrid". The sources can operate in parallel to the grid or can operate in island, providing UPS services. The system can disconnect from the utility during large events (i.e. faults, voltage collapses), but may also intentionally disconnect when the quality of power from the grid falls below certain standards. CERTS Microgrid concepts were demonstrated at a full-scale test bed built near Columbus, Ohio and operated by American Electric Power. The testing fully confirmed earlier research that had been conducted initially through analytical simulations, then through laboratory emulations, and finally through factory acceptance testing of individual microgrid components. The islanding and resynchronization method met all Institute of Electrical and Electronics Engineers Standard 1547 and power quality requirements. The electrical protection system was able to distinguish between normal and faulted operation. The controls were found to be robust under all conditions, including difficult motor starts and high impedance faults. Keywords: CHP, UPS, distributed generation, intentional islanding, inverters, microgrid, CERTS, power vs. frequency droop, voltage droop.

32

DAG in Oil Laboratory Proficiency Testing  

Science Conference Proceedings (OSTI)

Lab proficiency testing for DAG in Oil to determine Total DAG.Samples include canola oil and soybean oil. DAG in Oil Laboratory Proficiency Testing Laboratory Proficiency Program (LPP) aocs applicants certified chemist chemists Lab laboratories Laborato

33

Technical Consumer Products - Compliance Test Laboratory  

Science Conference Proceedings (OSTI)

Technical Consumer Products - Compliance Test Laboratory. NVLAP Lab Code: 200571-0. Address and Contact Information: ...

2013-09-20T23:59:59.000Z

34

NREL: Wind Research - Structural Testing Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Structural Testing Laboratory Structural Testing Laboratory Photo of NREL's Wind Research User Facility. Shown in front are several test bays that protect proprietary information while companies disassemble turbines to analyze, test, and modify individual components. NREL's Structural Testing Laboratory includes office space for industry researchers, houses experimental laboratories, computer facilities, space for assembling turbines, components, and blades for testing. Credit: Patrick Corkery. NREL's Structural Testing Laboratory at the National Wind Technology Center (NWTC) provides office space for industry researchers, experimental laboratories, computer facilities for analytical work, and space for assembling components and turbines for atmospheric testing. The facility also houses two blade stands equipped with overhead cranes and

35

Edible Fat Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing for Edible Fat to test OSI,FFA, AOCS Color, Capillary Melting Point, Iodine Value, Lovibond Color, Mettler Dropping Point, a;-Monoglycerides, SFC Edible Fat Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP

36

Specialty Oils Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing provider for Specialty Oils. Samples tested include Walnut Oil, Pecan Oil, Pistachio Oil, Sesame Seed Oil, Flax Seed Oil, Neem Oil, Safflower Oil, Sunflower Oil. Specialty Oils Laboratory Proficiency Testing Program Laboratory Pro

37

Fish Meal Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing provider for Fish Meal to test Acid Value, Crude Protein, Moisture, Oil, Ash, Pepsin Digestibility, Ammonia Nitrogen. Fish Meal Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP) aocs applicants certified

38

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

and John Stevens are with Sandia National Laboratories,of the Technical Staff at Sandia National Labs in the Energybefore taking a job with Sandia National Laboratories and

Lasseter, R. H.

2010-01-01T23:59:59.000Z

39

Cottonseed Oil Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing in Cottonseed Oil for Bleached Color, Refined Color, Free Fatty Acids, Moisture and Volatiles, Soap. Cottonseed Oil Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP) aocs applicants certified chemist che

40

Nutritional Labeling Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing provider for Nutritional Labeling to determine Total Fat, FAME, Total Protein, Vitamin A, Vitamin D, Vitamin E Nutritional Labeling Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP) aocs applicants certif

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Gas Chromatography Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing provider for Gas Chromatography to determine Fatty Acid Composition and Iodine Value using AOCS methods Ce 1-62 and Cd 1c-85. Gas Chromatography Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP) aocs appl

42

Oilseed Meal Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing provider for Oilseed Meals.Samples in this series include Soybean Meal, Canola Meal, Peanut Meal, cottonseed Meal, Safflower Meal, Protein Concentrate. Oilseed Meal Laboratory Proficiency Testing Program Laboratory Proficiency Pr

43

Booz Allen Hamilton Cyber Assurance Testing Laboratory  

Science Conference Proceedings (OSTI)

Booz Allen Hamilton Cyber Assurance Testing Laboratory. NVLAP Lab Code: 200423-0. Address and Contact Information: ...

2013-08-16T23:59:59.000Z

44

CERTS Microgrid Laboratory Test Bed  

Science Conference Proceedings (OSTI)

The objective of the CERTS Microgrid Test Bed project was to enhance the ease of integrating energy sources into a microgrid. The project accomplished this objective by developing and demonstrating three advanced techniques, collectively referred to as the CERTS Microgrid concept, that significantly reduce the level of custom field engineering needed to operate microgrids consisting of generating sources less than 100kW. The techniques comprising the CERTS Microgrid concept are: 1) a method for effecting automatic and seamless transitions between grid-connected and islanded modes of operation, islanding the microgrid's load from a disturbance, thereby maintaining a higher level of service, without impacting the integrity of the utility's electrical power grid; 2) an approach to electrical protection within a limited source microgrid that does not depend on high fault currents; and 3) a method for microgrid control that achieves voltage and frequency stability under islanded conditions without requiring high-speed communications between sources. These techniques were demonstrated at a full-scale test bed built near Columbus, Ohio and operated by American Electric Power. The testing fully confirmed earlier research that had been conducted initially through analytical simulations, then through laboratory emulations,and finally through factory acceptance testing of individual microgrid components. The islanding and resychronization method met all Institute of Electrical and Electronics Engineers Standard 1547 and power quality requirements. The electrical protection system was able to distinguish between normal and faulted operation. The controls were found to be robust under all conditions, including difficult motor starts and high impedance faults. The results from these tests are expected to lead to additional testing of enhancements to the basic techniques at the test bed to improve the business case for microgrid technologies, as well to field demonstrations involving microgrids that involve one or more of the CERTS Microgrid concepts. Future planned microgrid work involves unattended continuous operation of the microgrid for 30 to 60 days to determine how utility faults impact the operation of the microgrid and to gage the power quality and reliability improvements offered by microgrids.

Eto, Joe; Lasseter, Robert; Schenkman, Ben; Stevens, John; Klapp, Dave; Volkommer, Harry; Linton, Ed; Hurtado, Hector; Roy, Jean

2009-06-18T23:59:59.000Z

45

Postirradiation Testing Laboratory (327 Building)  

Science Conference Proceedings (OSTI)

A Standards/Requirements Identification Document (S/RID) is the total list of the Environment, Safety and Health (ES and H) requirements to be implemented by a site, facility, or activity. These requirements are appropriate to the life cycle phase to achieve an adequate level of protection for worker and public health and safety, and the environment during design, construction, operation, decontamination and decommissioning, and environmental restoration. S/RlDs are living documents, to be revised appropriately based on change in the site`s or facility`s mission or configuration, a change in the facility`s life cycle phase, or a change to the applicable standards/requirements. S/RIDs encompass health and safety, environmental, and safety related safeguards and security (S and S) standards/requirements related to the functional areas listed in the US Department of Energy (DOE) Environment, Safety and Health Configuration Guide. The Fluor Daniel Hanford (FDH) Contract S/RID contains standards/requirements, applicable to FDH and FDH subcontractors, necessary for safe operation of Project Hanford Management Contract (PHMC) facilities, that are not the direct responsibility of the facility manager (e.g., a site-wide fire department). Facility S/RIDs contain standards/requirements applicable to a specific facility that are the direct responsibility of the facility manager. S/RlDs are prepared by those responsible for managing the operation of facilities or the conduct of activities that present a potential threat to the health and safety of workers, public, or the environment, including: Hazard Category 1 and 2 nuclear facilities and activities, as defined in DOE 5480.23. Selected Hazard Category 3 nuclear, and Low Hazard non-nuclear facilities and activities, as agreed upon by RL. The Postirradiation Testing Laboratory (PTL) S/RID contains standards/ requirements that are necessary for safe operation of the PTL facility, and other building/areas that are the direct responsibility of the specific facility manager. The specific DOE Orders, regulations, industry codes/standards, guidance documents and good industry practices that serve as the basis for each element/subelement are identified and aligned with each subelement.

Kammenzind, D.E.

1997-05-28T23:59:59.000Z

46

Ricoh Company LTD. Acoustical Testing Laboratory  

Science Conference Proceedings (OSTI)

Acoustical Testing Laboratory. ... 143-8555 JAPAN Contact: Mr. Seiji Nakamura Phone: 81-046-292-3871 Fax: E-Mail: seiji.nakamura@nts.ricoh.co.jp ...

2013-11-08T23:59:59.000Z

47

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

Test Bed at American Electric Power Figure 2. One-LineH. VOLKOMMER, American Electric Power, USA E. LINTON AND H.and operated by American Electric Power. The testing fully

ETO, J.

2010-01-01T23:59:59.000Z

48

Feed Microscopy Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Feed Microscopy using microscopic examination of animal feed samples and AAFCO terminology. Feed Microscopy Laboratory Proficiency Testing Program Agricultural Microscopy agri-food sector agricultural Agricultural Micr

49

Laboratory Performance Testing of Residential Dehumidifiers (Presentation)  

SciTech Connect

Six residential vapor compression cycle dehumidifiers spanning the available range of capacities and efficiencies were tested in the National Renewable Energy Laboratory's Heating, Ventilating, and Air-Conditioning Systems Laboratory. Each was tested under a wide range of indoor air conditions to facilitate the development of performance curves for use in whole-building simulation tools.

Winkler, J.

2012-03-01T23:59:59.000Z

50

Independent Materials Testing Laboratories, Inc.  

Science Conference Proceedings (OSTI)

... [02/L24] ASTM D2974 Moisture, Ash, and Organic Matter of Peat Material. ... Engaged in the Testing and/or Inspection of Materials Used in ...

2013-08-16T23:59:59.000Z

51

CERTS Microgrid Laboratory Test Bed  

NLE Websites -- All DOE Office Websites (Extended Search)

projects, and currently performs design and testing of power converters and direct-drive permanent magnet generator technology for wind power products. Jean Roy has a Masters...

52

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

1. CERTS Microgrid Test Bed at American Electric Power PhotoCredit: American Electric Power Figure 2. One-Line DiagramVOLKOMMER, American Electric Power, USA E. LINTON AND HECTOR

Eto, Joe

2009-01-01T23:59:59.000Z

53

Approved Chemists  

Science Conference Proceedings (OSTI)

The Approved Chemist Program recognizes the most accomplished participants in the Laboratory Proficiency Program (LPP).Certification is based on performance during the previous LPP year.Approved Chemists can become referees for NOPA Soybean meal trading. A

54

CERTS Microgrid Laboratory Test Bed  

NLE Websites -- All DOE Office Websites (Extended Search)

Submitted to IEEE Transactions on Power Delivery Submitted to IEEE Transactions on Power Delivery Abstract--. CERTS Microgrid concept captures the emerging potential of distributed generation using a system approach. CERTS views generation and associated loads as a subsystem or a "microgrid". The sources can operate in parallel to the grid or can operate in island, providing UPS services. The system can disconnect from the utility during large events (i.e. faults, voltage collapses), but may also intentionally disconnect when the quality of power from the grid falls below certain standards. CERTS Microgrid concepts were demonstrated at a full-scale test bed built near Columbus, Ohio and operated by American Electric Power. The testing fully confirmed earlier research that had been conducted initially through analytical simulations,

55

GOED Nutraceutical Oils Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Global Organization for EPA and DHA Omega-3 /GOED Nutraceutical Oils in Marine Oil samples using AOCS methods Ce 1i-07, GOED Monograph, Cd 3d-63, Cd 8b-90, Cd 18-90. GOED Nutraceutical Oils Laboratory Proficiency Testing

56

Laboratory Performance Testing of Residential Dehumidifiers  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Laboratory Performance Laboratory Performance Testing of Residential Dehumidifiers Building America Stakeholders Meeting Jon Winkler March 2, 2012 2 Motivation * Solution: Performance map across a variety of operating conditions Dehumidifier Manufacturer Data ( ) in in RH T f e Performanc , = 80 F 60% RH Normalized Energy Factor Entering Drybulb Temperature (°C) Simulation Tool Input ? 3 ENERGY STAR Efficiency Criteria 1 2 3 4 0 30 60 90 120 150 Energy Factor (L/kWh) Dehumidifier Capacity (pints/day) ENERGY STAR v2.0 Efficiency Criteria Dehumidifiers Tested ENERGY STAR Products Non ENERGY STAR Products v3.0 Criteria 4 NREL Technical Report Laboratory Test Report for Six ENERGY STAR® Dehumidifiers Jon Winkler, Dane Christensen, and Jeff Tomerlin NREL/TP-5500-52791 December 2011

57

Mixed Seed Laboratory Proficiency Testing Program Mixed Seed  

Science Conference Proceedings (OSTI)

Laboratory Proficiency Testing service for Sunflower,Safflower, and Canola to test Oil, Clean Seed Basis, Nitrogen, Free Fatty Acids, Glucosinolates, Chlorophyll. Mixed Seed Laboratory Proficiency Testing Program Mixed Seed Laboratory Proficiency Program

58

Crush Testing at Oak Ridge National Laboratory  

SciTech Connect

The dynamic crush test is required in the certification testing of some small Type B transportation packages. International Atomic Energy Agency regulations state that the test article must be 'subjected to a dynamic crush test by positioning the specimen on the target so as to suffer maximum damage.' Oak Ridge National Laboratory (ORNL) Transportation Technologies Group performs testing of Type B transportation packages, including the crush test, at the National Transportation Research Center in Knoxville, Tennessee (United States). This paper documents ORNL's experiences performing crush tests on several different Type B packages. ORNL has crush tested five different drum-type package designs, continuing its 60 year history of RAM package testing. A total of 26 crush tests have been performed in a wide variety of package orientations and crush plate CG alignments. In all cases, the deformation of the outer drum created by the crush test was significantly greater than the deformation damage caused by the 9 m drop test. The crush test is a highly effective means for testing structural soundness of smaller nondense Type B shipping package designs. Further regulatory guidance could alleviate the need to perform the crush test in a wide range of orientations and crush plate CG alignments.

Feldman, Matthew R [ORNL

2011-01-01T23:59:59.000Z

59

Battery testing at Argonne National Laboratory  

DOE Green Energy (OSTI)

Argonne National Laboratory`s Analysis & Diagnostic Laboratory (ADL) tests advanced batteries under simulated electric and hybrid vehicle operating conditions. The ADL facilities also include a post-test analysis laboratory to determine, in a protected atmosphere if needed, component compositional changes and failure mechanisms. The ADL provides a common basis for battery performance characterization and life evaluations with unbiased application of tests and analyses. The battery evaluations and post-test examinations help identify factors that limit system performance and life, and the most-promising R&D approaches for overcoming these limitations. Since 1991, performance characterizations and/or life evaluations have been conducted on eight battery technologies (Na/S, Li/S, Zn/Br, Ni/MH, Ni/Zn, Ni/Cd, Ni/Fe, and lead-acid). These evaluations were performed for the Department of Energy`s. Office of Transportation Technologies, Electric and Hybrid Propulsion Division (DOE/OTT/EHP), and Electric Power Research Institute (EPRI) Transportation Program. The results obtained are discussed.

DeLuca, W.H.; Gillie, K.R.; Kulaga, J.E.; Smaga, J.A.; Tummillo, A.F.; Webster, C.E.

1993-03-25T23:59:59.000Z

60

CTBTO Contractor Laboratory Test Sample Production Report  

SciTech Connect

In October 2012 scientists from both Idaho National Laboratory (INL) and the CTBTO contact laboratory at Seibersdorf, Austria designed a system and capability test to determine if the INL could produce and deliver a short lived radio xenon standard in time for the standard to be measured at the CTBTO contact laboratory at Seibersdorf, Austria. The test included sample standard transportation duration and potential country entrance delays at customs. On October 23, 2012 scientists at the Idaho National Laboratory (INL) prepared and shipped a Seibersdorf contract laboratory supplied cylinder. The canister contained 1.0 scc of gas that consisted of 70% xenon and 30% nitrogen by volume. The t0 was October 24, 2012, 1200 ZULU. The xenon content was 0.70 +/ 0.01 scc at 0 degrees C. The 133mXe content was 4200 +/ 155 dpm per scc of stable xenon on t0 (1 sigma uncertainty). The 133Xe content was 19000 +/ 800 dpm per scc of stable xenon on t0 (1 sigma uncertainty).

Bob Hague; Tracy Houghton; Nick Mann; Matt Watrous

2013-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Battery testing at Argonne National Laboratory  

SciTech Connect

Advanced battery technology evaluations are performed under simulated electric-vehicle operating conditions at the Analysis Diagnostic Laboratory (ADL) of Argonne National Laboratory. The ADL results provide insight into those factors that limit battery performance and life. The ADL facilities include a test laboratory to conduct battery experimental evaluations under simulated application conditions and a post-test analysis laboratory to determine, in a protected atmosphere if needed, component compositional changes and failure mechanisms. This paper summarizes the performance characterizations and life evaluations conducted during FY 1992 on both single cells and multi-cell modules that encompass six battery technologies [Na/S, Li/FeS, Ni/Metal-Hydride, Ni/Zn, Ni/Cd, Ni/Fe]. These evaluations were performed for the Department of Energy, Office of Transportation Technologies, Electric and Hybrid Propulsion Division, and the Electric Power Research Institute. The ADL provides a common basis for battery performance characterization and lie evaluations with unbiased application of tests and analyses. The results help identify the most promising R D approaches for overcoming battery limitations, and provide battery users, developers, and program managers with a measure of the progress being made in battery R D programs, a comparison of battery technologies, and basic data for modeling.

DeLuca, W.H.; Gillie, K.R.; Kulaga, J.E.; Smaga, J.A.; Tummillo, A.F.; Webster, C.E.

1992-01-01T23:59:59.000Z

62

Heat Pump Water HeatersLaboratory Tests  

Science Conference Proceedings (OSTI)

EPRI conducted laboratory tests of several heat pump water heaters to assess their performance and energy efficiency. Among U.S. heat pump water heaters tested were new products from A. O. Smith, General Electric (GE), and Rheem. These units are designed to be integral, drop-in replacements for standard electric water heaters. Additionally, EPRI tested the Japanese-based Eco-cute heat pump water heater from Daikin, which is a split unit with an outdoor heat pump using CO2 as the refrigerant and an indoor...

2009-12-11T23:59:59.000Z

63

Battery testing at Argonne National Laboratory  

DOE Green Energy (OSTI)

Argonne National Laboratory's Analysis Diagnostic Laboratory (ADL) tests advanced batteries under simulated electric and hybrid vehicle operating conditions. The ADL facilities also include a post-test analysis laboratory to determine, in a protected atmosphere if needed, component compositional changes and failure mechanisms. The ADL provides a common basis for battery performance characterization and life evaluations with unbiased application of tests and analyses. The battery evaluations and post-test examinations help identify factors that limit system performance and life, and the most-promising R D approaches for overcoming these limitations. Since 1991, performance characterizations and/or life evaluations have been conducted on eight battery technologies (Na/S, Li/S, Zn/Br, Ni/MH, Ni/Zn, Ni/Cd, Ni/Fe, and lead-acid). These evaluations were performed for the Department of Energy's. Office of Transportation Technologies, Electric and Hybrid Propulsion Division (DOE/OTT/EHP), and Electric Power Research Institute (EPRI) Transportation Program. The results obtained are discussed.

DeLuca, W.H.; Gillie, K.R.; Kulaga, J.E.; Smaga, J.A.; Tummillo, A.F.; Webster, C.E.

1993-03-25T23:59:59.000Z

64

Battery testing at Argonne National Laboratory  

SciTech Connect

Argonne National Laboratory's Analysis Diagnostic Laboratory (ADL) tests advanced batteries under simulated electric and hybrid vehicle operating conditions. The ADL facilities also include a post-test analysis laboratory to determine, in a protected atmosphere if needed, component compositional changes and failure mechanisms. The ADL provides a common basis for battery performance characterization and life evaluations with unbiased application of tests and analyses. The battery evaluations and post-test examinations help identify factors that limit system performance and life, and the most-promising R D approaches for overcoming these limitations. Since 1991, performance characterizations and/or life evaluations have been conducted on eight battery technologies (Na/S, Li/S, Zn/Br, Ni/MH, Ni/Zn, Ni/Cd, Ni/Fe, and lead-acid). These evaluations were performed for the Department of Energy's. Office of Transportation Technologies, Electric and Hybrid Propulsion Division (DOE/OTT/EHP), and Electric Power Research Institute (EPRI) Transportation Program. The results obtained are discussed.

DeLuca, W.H.; Gillie, K.R.; Kulaga, J.E.; Smaga, J.A.; Tummillo, A.F.; Webster, C.E.

1993-03-25T23:59:59.000Z

65

Los Alamos National Laboratory begins pumping tests on chromium...  

NLE Websites -- All DOE Office Websites (Extended Search)

National Laboratory begins pumping tests on chromium plume The chromium originated from cooling towers at a Laboratory power plant and was released from 1956 to 1972. May 22,...

66

Genetically Modified Organism (GMO) Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Genetically Modified Organism(GMO) in Roundup Ready, Soy Flour, Non-Modified Soy Flour samples. Genetically Modified Organism (GMO) Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP) aocs appli

67

Vegetable Oil for Color Only Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Vegetable Oil for Color Only. Sample Includes soybean oil. Vegetable Oil for Color Only Laboratory Proficiency Testing Program Laboratory Proficiency Program (LPP) aocs applicants certified chemist chemists Lab laborat

68

NIOP-AOCS Fats and Oils Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for NIOP-AOCS Fats & Oils, samples in this series include crude coconut oil, RB Palm Oil, Crude Safflower Oil, Crude sunflower Oil. NIOP-AOCS Fats and Oils Laboratory Proficiency Testing Program Laboratory Proficiency Progr

69

NASA Glenn Research Center Acoustical Testing Laboratory: Five year retrospective  

Science Conference Proceedings (OSTI)

In the five years since the NASA Glenn Research Center Acoustical Testing Laboratory (ATL) opened its doors in September

2005-01-01T23:59:59.000Z

70

Sandia National Laboratories: Sandia National Laboratories: Tonopah Test  

NLE Websites -- All DOE Office Websites (Extended Search)

Tonopah Test Range Tonopah Test Range Tonopah Tonopah Test Range (TTR) is the testing range of choice for all national security missions. Sandia conducts operations at TTR in support of the Department of Energy/National Nuclear Security Administration's weapons programs. Principal DOE activities at TTR include stockpile reliability testing; arming, fusing, and firing systems testing; and the testing of nuclear weapon delivery systems. The range also offers a unique test environment for use by other U.S. government agencies and their contractors. Located about 160 miles northwest of Las Vegas, TTR is an immense area of flat terrain ideal for rockets and low-altitude, high-speed aircraft operations. Situated between two mountain ranges, TTR's remote location and restricted airspace ensure that tests can be conducted with a high degree

71

Inverter testing at Sandia National Laboratories  

SciTech Connect

Inverters are key building blocks of photovoltaic (PV) systems that produce ac power. The balance of systems (BOS) portion of a PV system can account for up to 50% of the system cost, and its reliable operation is essential for a successful PV system. As part of its BOS program, Sandia National Laboratories (SNL) maintains a laboratory wherein accurate electrical measurements of power systems can be made under a variety of conditions. This paper outlines the work that is done in that laboratory.

Ginn, J.W.; Bonn, R.H.; Sittler, G. [Sandia National Labs., Albuquerque, NM (United States). Photovoltaic System Components Dept.

1997-04-01T23:59:59.000Z

72

IOC-AOCS Olive Oil Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Olive Oil to test Fatty Acid Composition, Free Fatty Acids, Peroxide Value, Sterenes, Sterols, Stigmastadienes, Triglycerides (ECN 42), UV extinction, Waxes. IOC-AOCS Olive Oil Laboratory Proficiency Testing Program Oli

73

Marine Products and Marine Oil Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Marine Products and Marine Oil samples to test Anisidine Value, Free Fatty Acid, Iodine Value, Insoluble Impurities, Moisture, Peroxide Value. Marine Products and Marine Oil Laboratory Proficiency Testing Program Labo

74

Solid Fat Content by NMR Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Solid Fat Content by NMR using AOCS Test Method Cd 16-93 to determine solid fat content in Margarine Oil, Vegetable Shortening, Emulsified Shortening Solid Fat Content by NMR Laboratory Proficiency Testing Program Labor

75

Marine Oil Fatty Acid Profile Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing provider for Marine Products and Marine Oil Fatty Acid Profile to test Fatty Acid Composition with AOCS methods Ce 1b-89 or Ce 1i-07. Marine Oil Fatty Acid Profile Laboratory Proficiency Testing Program Laboratory Proficiency Prog

76

Summer Infiltration/Ventilation Test Results from the FRTF Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Summer InfiltrationVentilation Test Results from the FRTF Laboratory Building America Technical Review Meeting April 29-30, 2013 A Research Institute of the University of Central...

77

Fuel Cell Development and Test Laboratory (Fact Sheet), NREL...  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL's state-of-the-art Fuel Cell Development and Test Laboratory in the Energy Systems Integration Facility (ESIF) supports NREL's fuel cell research and development...

78

CERTS Microgrid Laboratory Test Bed - PIER Final Project Report  

E-Print Network (OSTI)

Laboratory Test Bed. California Energy Commission, PublicCERTS Microgrid, California Energy Commission R&D Forum, 4CERTS Microgrid, California Energy Commission R&D Forum, 4

Eto, Joseph H.

2008-01-01T23:59:59.000Z

79

Uncertainty Study of INEEL EST Laboratory Battery Testing Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

INEELEXT-01-00505 December 2001 Uncertainty Study of INEEL EST Laboratory Battery Testing Systems Volume 1 Background and Derivation of Uncertainty Relationships John L. Morrison...

80

The Virtual Cement and Concrete Testing Laboratory ...  

Science Conference Proceedings (OSTI)

... the need to satisfy performance requirements in the ... electron microscope (Analytical Chemistry Division ... Compressive testing machines (Structures ...

2002-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Olive Oil Sensory Panel Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Olive oil. Sensory panel determination of Extra Virgin, Virgin, Lampante using International Olive Council guideline COI/T.20/Doc. No 15/Rev. 4 Olive Oil Sensory Panel Laboratory Proficiency Testing Program Olive Oil

82

State of Ohio Approval Policy  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

STATE OF OHIO STATE OF OHIO DIVISION OF STATE FIRE MARSHAL E 85 DISPENSER UTILIZATION APPROVAL POLICY When the Division of State Fire Marshal is involved in the approval process for a flammable/combustible liquid dispensing facility that utilizes E-blend, where a listed dispensing device is required by the state fire code and the proposed dispensing device is not specifically listed for the intended application, the following guidelines shall be followed in the approval process: As there are currently no approved dispensers, as tested and listed by Underwriters Laboratory or other approved authoritative source set forth in OAC 1301:7-7- 01(O)(2), OFC 115.2 , that can be used for the dispensing of E-blend fuels in Ohio in accordance with the existing and as filed revisions to the Ohio Fire Code, the

83

Idaho National Laboratory Advanced Test Reactor Probabilistic Risk  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Idaho National Laboratory Advanced Test Reactor Probabilistic Risk Idaho National Laboratory Advanced Test Reactor Probabilistic Risk Assessment Idaho National Laboratory Advanced Test Reactor Probabilistic Risk Assessment September 19, 2012 Presenter: Bentley Harwood, Advanced Test Reactor Nuclear Safety Engineer Battelle Energy Alliance Idaho National Laboratory Topics covered: PRA studies began in the late 1980s 1989, ATR PRA published as a summary report 1991, ATR PRA full report 1994 and 2004 various model changes 2011, Consolidation, update and improvement of previous PRA work 2012/2013, PRA risk monitor implementation Idaho National Laboratory Advanced Test Reactor Probabilistic Risk Assessment More Documents & Publications DOE's Approach to Nuclear Facility Safety Analysis and Management Nuclear Regulatory Commission Handling of Beyond Design Basis Events for

84

In situ vitrification laboratory-scale test work plan  

SciTech Connect

The Buried Waste Program was established in October 1987 to accelerate the studies needed to develop a long-term management plan for the buried mixed waste at the Radioactive Waste Management Complex at Idaho Engineering Laboratory. The In Situ Vitrification Project is being conducted in a Comprehensive Environmental Response, Compensation, and Liability Act feasibility study format to identify methods for the long-term management of mixed buried waste. To support the overall feasibility study, the situ vitrification treatability investigations are proceeding along the three parallel paths: laboratory-scale tests, intermediate field tests, and field tests. Laboratory-scale tests are being performed to provide data to mathematical modeling efforts, which, in turn, will support design of the field tests and to the health and safety risk assessment. This laboratory-scale test work plan provides overall testing program direction to meet the current goals and objectives of the in situ vitrification treatability investigation. 12 refs., 1 fig., 7 tabs.

Nagata, P.K.; Smith, N.L.

1991-05-01T23:59:59.000Z

85

Materials Transportation Testing & Analysis at Sandia National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

Testing Testing Carlos Lopez, (505) 845-9545 Packages transporting the larger "Type B" quantities of radioactive materials must be qualified and certified under Title 10, Code of Federal Regulations, Part 71, or under the equivalent international standard ST-1 issued by the International Atomic Energy Agency. The principal thermal qualification test is the 30 minute pool fire. As part of the National Transportation Program, the Transportation Risk & Packaging Program at Sandia can plan and conduct these tests for DOE and other package suppliers. Test Plans, QA plans and other necessary test documents can be prepared for customer and regulatory approval. Tests may be conducted with a variety of available facilities at Sandia, including large pools, an indoor fire facility, and a radiant heat test

86

Palm Oil Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing provider for Palm Oil determinations via P4.3 PORIM, P4.1 PORIM, P2.5 PORIM, Cd 1d-92, P4.2 PORIM, Cd 96b-93,

87

Sandia National Laboratories: Locations: Kauai Test Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Test Facility P.O. Box 308 Waimea, Kauai HI 96796-0308 7:30 a.m. - 4:30 p.m. Hawaii-Aleutian Standard Time, M - F Steven Lautenschleger, Manager (505) 845-9234,...

88

Inverter Testing at Sandia National Laboratories* Jerry W. Ginn  

Office of Scientific and Technical Information (OSTI)

Inverter Testing at Sandia National Inverter Testing at Sandia National Laboratories* Jerry W. Ginn Russell H. Bonn Photovoltaic System Components Department Sandia National Laboratories PO Box 5800 Albuquerque, NM 87185-0752 Abstract. Inverters are key building blocks of photovoltaic (PV) systems that produce ac power. The balance of systems @OS) portion of a PV system can account for up to 50% of the system cost, and its reliable operation is essential for a successful PV system. As part of its BOS program, Sandia National Laboratories (SNL) maintains a laboratory wherein accurate electrical measurements of power systems can be made under a variety of conditions. This paper outlines the work that is done in that laboratory. TESTING ACTIVITIES Inverter testing at SNL thus far

89

NREL: ReFUEL Laboratory - Engine Dynamometer Test Cells  

NLE Websites -- All DOE Office Websites (Extended Search)

Engine Dynamometer Test Cells Engine Dynamometer Test Cells The ReFUEL Laboratory features two engine dynamometer test cells-one for heavy-duty engines and another for light-duty engines. Heavy-Duty Engine Dynamometer Test Cell Capabilities Photo of heavy-duty engine dynamometer test cell in laboratory setting. Heavy-duty engines are certified as meeting emission regulations by the manufacturer using an engine dynamometer. These protocols, known as the Heavy-Duty Federal Test Procedures (HD-FTP), are highly standardized, and results can be readily compared between laboratories. Because the heavy-duty engine dynamometer test cell performs the HD-FTP on engines up to 600 hp, advanced fuels can be evaluated in a way that is meaningful to the engine-research community. In addition to testing a wide

90

Centrifugal contractors for laboratory-scale solvent extraction tests  

SciTech Connect

A 2-cm contactor (minicontactor) was developed and used at Argonne National Laboratory for laboratory-scale testing of solvent extraction flowsheets. This new contactor requires only 1 L of simulated waste feed, which is significantly less than the 10 L required for the 4-cm unit that had previously been used. In addition, the volume requirements for the other aqueous and organic feeds are reduced correspondingly. This paper (1) discusses the design of the minicontactor, (2) describes results from having applied the minicontactor to testing various solvent extraction flowsheets, and (3) compares the minicontactor with the 4-cm contactor as a device for testing solvent extraction flowsheets on a laboratory scale.

Leonard, R.A.; Chamberlain, D.B.; Conner, C.

1995-12-31T23:59:59.000Z

91

Department of Energy Designates the Idaho National Laboratory Advanced Test  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Designates the Idaho National Laboratory Designates the Idaho National Laboratory Advanced Test Reactor as a National Scientific User Facility Department of Energy Designates the Idaho National Laboratory Advanced Test Reactor as a National Scientific User Facility April 23, 2007 - 12:36pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today designated the Idaho National Laboratory's (INL) Advanced Test Reactor (ATR) as a National Scientific User Facility. Establishing the ATR as a National Scientific User Facility will help assert U.S. leadership in nuclear science and technology, and will attract new users - universities, laboratories and industry - to conduct research at the ATR. This facility will support basic and applied nuclear research and development (R&D), furthering

92

Lawrence Livermore Laboratory PERFORMANCE TEST OF A BLADELESS...  

NLE Websites -- All DOE Office Websites (Extended Search)

Lawrence Livermore Laboratory PERFORMANCE TEST OF A BLADELESS TURBINE FOR GF.OTHF.RMAT. APPLICATIONS R. Steidel and H. Weiss March 24, 1976 I j UCID-17068 This is an informal...

93

Fuel Cell Development and Test Laboratory (Fact Sheet)  

DOE Green Energy (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Fuel Cell Development and Test Laboratory at the Energy Systems Integration Facility. NREL's state-of-the-art Fuel Cell Development and Test Laboratory in the Energy Systems Integration Facility (ESIF) supports NREL's fuel cell research and development projects through in-situ fuel cell testing. Current projects include various catalyst development projects, a system contaminant project, and the manufacturing project. Testing capabilities include but are not limited to single cell fuel cells and fuel cell stacks.

Not Available

2011-10-01T23:59:59.000Z

94

Protocol for Laboratory Testing of SCR Catalyst: 2nd Edition  

Science Conference Proceedings (OSTI)

With the widespread deployment of selective catalytic NOx reduction (SCR) throughout the U.S. fleet of coal fired utility boilers, there was a need to establish standardized protocols to test catalyst. In 2006, EPRI issued a protocol that provided a uniform basis for testing SCR catalyst. In 2007, a wide range of industry representatives, including members of the Post-Combustion NOx Control Program, catalyst vendors, an independent catalyst testing laboratory, a catalyst reconditioner, and a provider of ...

2007-12-21T23:59:59.000Z

95

Laboratory Test Report for Six ENERGY STAR Dehumidifiers  

NLE Websites -- All DOE Office Websites (Extended Search)

Test Report for Six Test Report for Six ENERGY STAR ® Dehumidifiers Jon Winkler, Ph.D., Dane Christensen, Ph.D., and Jeff Tomerlin Technical Report NREL/TP-5500-52791 December 2011 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 Laboratory Test Report for Six ENERGY STAR ® Dehumidifiers Jon Winkler, Ph.D., Dane Christensen, Ph.D., and Jeff Tomerlin Prepared under Task No. BE11.0201 Technical Report NREL/TP-5500-52791 December 2011 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government.

96

Laboratory testing of the Sonnenschein charger, Part number DTL 12040  

SciTech Connect

This report describes the results of testing the Sonnenschein DTL 12040 battery charger in the Idaho National Engineering Laboratory (INEL) battery laboratory. The purpose of this testing was to evaluate the suitability of this charger for charging electric vehicle battery packs made up of Sonnenschein sealed lead acid batteries or possibly other similar batteries. This evaluation consists primarily of identifying the charge algorithm used and evaluating the resulting charge behavior. Other characteristics of the charger that could be significant are also noted. 5 figs., 2 tabs.

Hardin, J.E.; Martin, M.E.

1990-09-01T23:59:59.000Z

97

Materials Transportation Testing & Analysis at Sandia National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

Unique Solutions] Unique Solutions] [Working With Us] [Contacting Us] [News Center] [Search] [Home] [navigation panel] Materials Transportation Testing & Analysis Our Mission Our Contacts Write to Us Package Development Risk Assessment RADTRAN GIS Mapping Structural Analysis Thermal Analysis Structural Testing Thermal Testing MIDAS Data Aquisition System Concepts Materials Characterization Regulatory Development Certification Support RMIR Data Base Scientific Visualization Mobile Instrumentation Data Acquisition System (MIDAS) Doug Ammerman, (505) 845-8158 The Mobile Instrumentation Data Acquisition System (MIDAS), developed by Sandia National Laboratories for the U.S. Department of Energy, provides on-site data acquisition of containers that transport radioactive materials during impact, puncture, fire, and immersion tests.

98

Test plan for demonstration of Rapid Transuranic Monitoring Laboratory  

Science Conference Proceedings (OSTI)

This plan describes tests to demonstrate the capability of the Rapid Transuranic Monitoring Laboratory (RTML) to monitor airborne alpha-emitting radionuclides and analyze soil, smear, and filter samples for alpha- and gamma-emitting radionuclides under field conditions. The RTML will be tested during June 1993 at a site adjacent to the Cold Test Pit at the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory. Measurement systems installed in the RTML that will be demonstrated include two large-area ionization chamber alpha spectrometers, an x-ray/gamma-ray spectrometer, and four alpha continuous air monitors. Test objectives, requirements for data quality, experimental apparatus and procedures, and safety and logistics issues are described.

McIsaac, C.V.; Sill, C.W.; Gehrke, R.J.; Killian, E.W.; Watts, K.D.

1993-06-01T23:59:59.000Z

99

Energy Systems High Pressure Test Laboratory (Fact Sheet)  

Science Conference Proceedings (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Energy Systems High Pressure Test Laboratory at the Energy Systems Integration Facility. The purpose of the Energy Systems High Pressure Test Laboratory at NREL's Energy Systems Integration Facility (ESIF) is to provide space where high pressure hydrogen components can be safely tested. High pressure hydrogen storage is an integral part of energy storage technology for use in fuel cell and in other distributed energy scenarios designed to effectively utilize the variability inherent with renewable energy sources. The high pressure storage laboratory is co-located with energy storage activities such as ultra-capacitors, super conducting magnetic flywheel and mechanical energy storage systems laboratories for an integrated approach to system development and demonstration. Hazards associated with hydrogen storage at pressures up to 10,000 psi include oxygen displacement, combustion, explosion, and pressurization of room air due to fast release and physical hazards associated with burst failure modes. A critical understanding of component failure modes is essential in developing reliable, robust designs that will minimize failure risk beyond the end of service life. Development of test protocol for accelerated life testing to accurately scale to real world operating conditions is essential for developing regulations, codes and standards required for safe operation. NREL works closely with industry partners in providing support of advanced hydrogen technologies. Innovative approaches to product design will accelerate commercialization into new markets. NREL works with all phases of the product design life cycle from early prototype development to final certification testing. High pressure tests are performed on hydrogen components, primarily for the validation of developing new codes and standards for high pressure hydrogen applications. The following types of tests can be performed: Performance, Component and system level efficiency, Strength of materials and hydrogen compatibility, Safety demonstration, Model validation, and Life cycle reliability.

Not Available

2011-10-01T23:59:59.000Z

100

Results of Sandia National Laboratories grid-tied inverter testing  

SciTech Connect

This paper proposes a definition for a Non-Islanding Inverter. This paper also presents methods that can be used to implement such an inverter, along with references to prior work on the subject. Justification for the definition is provided on both a theoretical basis and results from tests conducted at Sandia National Laboratories and Ascension Technology, Inc.

Kern, G.A. [Ascension Technology, Inc., Boulder, CO (United States); Bonn, R.H.; Ginn, J.; Gonzalez, S. [Sandia National Labs., Albuquerque, NM (United States)

1998-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

The transportable heavy-duty engine emissions testing laboratory  

DOE Green Energy (OSTI)

West Virginia University has designed and constructed a Transportable Emissions Testing Laboratory for measuring emissions from heavy duty vehicles, such as buses and trucks operating on conventional and alternative fuels. The laboratory facility can be transported to a test site located at, or nearby, the home base of the vehicles to be tested. The laboratory has the capability of measuring vehicle emissions as the vehicle is operated under either transient or steady state loads and speeds. The exhaust emissions from the vehicle is sampled and the levels of the constituents of the emission are measured. The laboratory consists of two major units; a power absorber unit and an emissions measurement unit. A power absorber unit allows for the connection of a dynamic load to the drive train of the vehicle so that the vehicle can be driven'' through a test cycle while actually mounted on a stationary test bed. The emissions unit contains instrumentation and equipment which allows for the dilution of the vehicle's exhaust with air. The diluteed exhaust is sampled and analyzed to measure the level of concentration of those constituents which have been identified to have impact on the clean environment. Sampling probes withdraw diluted exhaust which is supplied to a number of different exhaust gas analysis instruments. The exhaust gas analysis instruments have the capability to measure the levels of the following exhaust gas constituents: carbon monoxide (CO), carbon dioxide (CO{sub 2}), oxides of nitrogen (NO{sub x}), unburned hydrocarbons (HC), formaldehyde (HCHO), methane and particulate matter. Additional instruments or sampling devices can be installed whenever measurements of additional constituents are desired. A computer based, data acquisition system is used to continuously monitor a wide range of parameters important to the operation of the test and to record the test results.

Not Available

1991-05-01T23:59:59.000Z

102

The transportable heavy-duty engine emissions testing laboratory  

SciTech Connect

West Virginia University has designed and constructed a Transportable Emissions Testing Laboratory for measuring emissions from heavy duty vehicles, such as buses and trucks operating on conventional and alternative fuels. The laboratory facility can be transported to a test site located at, or nearby, the home base of the vehicles to be tested. The laboratory has the capability of measuring vehicle emissions as the vehicle is operated under either transient or steady state loads and speeds. The exhaust emissions from the vehicle is sampled and the levels of the constituents of the emission are measured. The laboratory consists of two major units; a power absorber unit and an emissions measurement unit. A power absorber unit allows for the connection of a dynamic load to the drive train of the vehicle so that the vehicle can be driven'' through a test cycle while actually mounted on a stationary test bed. The emissions unit contains instrumentation and equipment which allows for the dilution of the vehicle's exhaust with air. The diluteed exhaust is sampled and analyzed to measure the level of concentration of those constituents which have been identified to have impact on the clean environment. Sampling probes withdraw diluted exhaust which is supplied to a number of different exhaust gas analysis instruments. The exhaust gas analysis instruments have the capability to measure the levels of the following exhaust gas constituents: carbon monoxide (CO), carbon dioxide (CO{sub 2}), oxides of nitrogen (NO{sub x}), unburned hydrocarbons (HC), formaldehyde (HCHO), methane and particulate matter. Additional instruments or sampling devices can be installed whenever measurements of additional constituents are desired. A computer based, data acquisition system is used to continuously monitor a wide range of parameters important to the operation of the test and to record the test results.

1991-05-01T23:59:59.000Z

103

Sandia National Laboratories: National Solar Thermal Test Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

ECISEnergyRenewable EnergySolar EnergyConcentrating Solar Power ECISEnergyRenewable EnergySolar EnergyConcentrating Solar Power (CSP)National Solar Thermal Test Facility National Solar Thermal Test Facility NSTTF Interactive Tour National Solar Thermal Test Facility (NSTTF) Operated by Sandia National Laboratories for the U.S. Department of Energy (DOE), the National Solar Thermal Test Facility (NSTTF) is the only test facility of this type in the United States. The NSTTF's primary goal is to provide experimental engineering data for the design, construction, and operation of unique components and systems in proposed solar thermal electrical plants planned for large-scale power generation. In addition, the site was built and instrumented to provide test facilities for a variety of solar and nonsolar applications. The facility can provide

104

Laser-Triggered Lightning Laboratory Tests: Preparation for Testing at Mississippi State University High-Voltage Laboratory  

Science Conference Proceedings (OSTI)

Lightning diversion using laser technology could be operationally used in the power industry to protect sensitive facilities such as nuclear power plants and critical substations, control centers, and customer facilities. This report provides results to date and plans for large-scale, high-voltage laboratory testing of laser-triggered lightning technology.

1998-01-15T23:59:59.000Z

105

Laboratory testing of high energy density capacitors for electric vehicles  

DOE Green Energy (OSTI)

Laboratory tests of advanced, high energy density capacitors in the Battery Test Laboratory of the Idaho National Engineering Laboratory have been performed to investigate their suitability for load-leveling the battery in an electric vehicle. Two types of devices were tested -- 3 V, 70 Farad, spiral wound, carbon-based, single cell devices and 20 V, 3. 5 Farad, mixed-oxide, multi-cell bipolar devices. The energy density of the devices, based on energy stored during charge to the rated voltage, was found to be 1--2 Wh/kg, which agreed well with that claimed by the manufacturers. Constant power discharge tests were performed at power densities up to 1500 W/kg. Discharges at higher power densities could have been performed had equipment been available to maintain constant power during discharges of less than one second. It was found that the capacitance of the devices were rate dependent with the rate dependency of the carbon-based devices being higher than that of the mixed-oxide devices. The resistance of both types of devices were relatively low being 20--30 milliohms. Testing done in the study showed that the advanced high energy density capacitors can be charged and discharged over cycles (PSFUDS) which approximate the duty cycle that would be encountered if the devices are used to load-level the battery in an electric vehicle. Thermal tests of the advanced capacitors in an insulated environment using the PSFUDS cycle showed the devices do not overheat with their temperatures increasing only 4--5{degrees}C for tests that lasted 5--7 hours. 7 refs., 33 figs., 11 tabs.

Burke, A.F.

1991-10-01T23:59:59.000Z

106

TESTING OF THE RADBALL TECHNOLOGY AT SAVANNAH RIVER NATIONAL LABORATORY  

SciTech Connect

The United Kingdom's National Nuclear Laboratory (NNL) has developed a remote, nonelectrical, radiation-mapping device known as RadBall (patent pending), which offers a means to locate and quantify radiation hazards and sources within contaminated areas of the nuclear industry. Positive results from initial deployment trials in nuclear waste reprocessing plants at Sellafield in the United Kingdom and the anticipated future potential use of RadBall throughout the U.S. Department of Energy Complex have led to the NNL partnering with the Savannah River National Laboratory (SRNL) to further test, underpin, and strengthen the technical performance of the technology. The study completed at SRNL addresses key aspects of the testing of the RadBall technology. The first set of tests was performed at Savannah River Nuclear Solutions Health Physics Instrument Calibration Laboratory (HPICL) using various gamma-ray sources and an x-ray machine with known radiological characteristics. The objective of these preliminary tests was to identify the optimal dose and collimator thickness. The second set of tests involved a highly contaminated hot cell. The objective of this testing was to characterize a hot cell with unknown radiation sources. The RadBall calibration experiments and hot cell deployment were successful in that for each trial radiation tracks were visible. The deployment of RadBall can be accomplished in different ways depending on the size and characteristics of the contaminated area (e.g., a hot cell that already has a crane/manipulator available or highly contaminated room that requires the use of a remote control device with sensor and video equipment to position RadBall). This report also presents SRNL-designed RadBall accessories for future RadBall deployment (a harness, PODS, and robot).

Farfan, E.; Foley, T.

2010-02-10T23:59:59.000Z

107

Materials Transportation Testing & Analysis at Sandia National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Characterization Materials Characterization Paul McConnell, (505) 844-8361 The purpose of hazardous and radioactive materials, i.e., mixed waste, packaging is to enable this waste type to be transported without posing a threat to the health or property of the general public. To achieve this goal, regulations have been written establishing general design requirement for such packagings. Based on these regulatory requirements, a Mixed Waste Chemical Compatibility Testing Program is intended to assure regulatory bodies that the issue of packaging compatibility towards hazardous and radioactive materials has been addressed. Such a testing program has been developed in the Transportation Systems Department at Sandia National Laboratories. Materials Characterization Capabilities

108

A Tested Method to Minimize Plutonium Assay Discrepancies Between Laboratories  

SciTech Connect

Plutonium assay differences are frequently observed between laboratories exchanging plutonium dioxide powders. These differences are commonly the result of chemical changes and/or nonhomogeneities in sampled materials. A method is proposed which eliminates the effects of chemical changes in samples, particularly moisture adsorption, and tests for sampling error. In an experiment performed to demonstrate the effectiveness of this method, three PuO2 batches of varying isotopic composition were synthesized at Mound to be used in the exchange tests. Powder sample aliquots from each batch were were weighed directly into their vials under controlled atmospheric conditions. Calorimetric heat measurements were made on each vial to test homogeneity and verify sample weight. Six vials of each batch were chemically assayed at Mound and six at NBL (New Brunswick Laboratory). Total dissolution of preweighed exchange samples elinimated the need for laborious and usually futile heating to return the material to its original condition. The mean chemical assay values obtained by Mound and NBL agree to within 0.01% for each of the compositions tested. Testing of both chemical assay and calorimetric data revealed no sampling error throughout the experiment.

Seiler, R. J.; Goss, R. L.; Rodenburg, W. W.; Rogers, D. R.

1978-12-01T23:59:59.000Z

109

Mobile Energy Laboratory energy-efficiency testing programs  

Science Conference Proceedings (OSTI)

This report summarizes energy-efficiency testing activities applying the Mobile Energy Laboratory (MEL) testing capabilities during the first and second quarters of fiscal year (FY) 1991. The MELs, developed by the US Department of Energy (DOE) Federal Energy Management Program (FEMP), are administered by Pacific Northwest Laboratory (PNL) and the Naval Energy and Environmental Support Activity (NEESA) for energy testing and energy conservation program support functions at federal facilities. The using agencies principally fund MEL applications, while DOE/FEMP funds program administration and capability enhancement activities. This report fulfills the requirements established in Section 8 of the MEL Use Plan (PNL-6861) for semiannual reporting on energy-efficiency testing activities using the MEL capabilities. The MEL Use Committee, formally established in 1989, developed the MEL Use Plan and meets semiannually to establish priorities for energy-efficient testing applications using the MEL capabilities. The MEL Use Committee is composed of one representative each of the US Department of Energy, US Army, US Air Force, US Navy, and other federal agencies.

Parker, G.B.; Currie, J.W.

1991-09-01T23:59:59.000Z

110

Mobile Energy Laboratory energy-efficiency testing programs  

Science Conference Proceedings (OSTI)

This report summarizes energy-efficiency testing activities applying the Mobile Energy Laboratory (MEL) testing capabilities during the third and fourth quarters of fiscal year (FY) 1991. The MELs, developed by the US Department of Energy (DOE) Federal Energy Management Program (FEMP), are administered by Pacific Northwest Laboratory (PNL) and the Naval Energy and Environmental Support Activity (NEESA) for energy testing and energy conservation program support functions at federal facilities. The using agencies principally fund MEL applications, while DOE/FEMP funds program administration and capability enhancement activities. This report fulfills the requirements established in Section 8 of the MEL Use Plan (PNL-6861) for semi-annual reporting on energy-efficiency testing activities using the MEL capabilities. The MEL Use Committee, formally established in 1989, developed the MEL Use Plan and meets semi-annually to establish priorities for energy-efficient testing applications using the MEL capabilities. The MEL Use Committee is composed of one representative each of the US Department of Energy, US Army, US Air Force, US Navy, and other federal agencies.

Parker, G B; Currie, J W

1992-03-01T23:59:59.000Z

111

CERTS Microgrid Laboratory Test Bed - PIER Final Project Report  

Science Conference Proceedings (OSTI)

The objective of the CERTS Microgrid Laboratory Test Bed project was to enhance the ease of integrating small energy sources into a microgrid. The project accomplished this objective by developing and demonstrating three advanced techniques, collectively referred to as the CERTS Microgrid concept, that significantly reduce the level of custom field engineering needed to operate microgrids consisting of small generating sources. The techniques comprising the CERTS Microgrid concept are: 1) a method for effecting automatic and seamless transitions between grid-connected and islanded modes of operation; 2) an approach to electrical protection within the microgrid that does not depend on high fault currents; and 3) a method for microgrid control that achieves voltage and frequency stability under islanded conditions without requiring high-speed communications. The techniques were demonstrated at a full-scale test bed built near Columbus, Ohio and operated by American Electric Power. The testing fully confirmed earlier research that had been conducted initially through analytical simulations, then through laboratory emulations, and finally through factory acceptance testing of individual microgrid components. The islanding and resychronization method met all Institute of Electrical and Electronics Engineers 1547 and power quality requirements. The electrical protections system was able to distinguish between normal and faulted operation. The controls were found to be robust and under all conditions, including difficult motor starts. The results from these test are expected to lead to additional testing of enhancements to the basic techniques at the test bed to improve the business case for microgrid technologies, as well to field demonstrations involving microgrids that involve one or mroe of the CERTS Microgrid concepts.

Eto, Joseph H.; Eto, Joseph H.; Lasseter, Robert; Schenkman, Ben; Klapp, Dave; Linton, Ed; Hurtado, Hector; Roy, Jean; Lewis, Nancy Jo; Stevens, John; Volkommer, Harry

2008-07-25T23:59:59.000Z

112

Laboratory Performance Testing of Residential Window Air Conditioners  

SciTech Connect

Window air conditioners are the dominant cooling product for residences, in terms of annual unit sales. They are inexpensive, portable and can be installed by the owner. For this reason, they are an attractive solution for supplemental cooling, for retrofitting air conditioning into a home which lacks ductwork, and for renters. Window air conditioners for sale in the United States are required to meet very modest minimum efficiency standards. Four window air conditioners' performance were tested in the Advanced HVAC Systems Laboratory on NREL's campus in Golden, CO. In order to separate and study the refrigerant system's performance, the unit's internal leakage pathways, the unit's fanforced ventilation, and the leakage around the unit resulting from installation in a window, a series of tests were devised that focused on each aspect of the unit's performance. These tests were designed to develop a detailed performance map to determine whole-house performance in different climates. Even though the test regimen deviated thoroughly from the industry-standard ratings test, the results permit simple calculation of an estimated rating for both capacity and efficiency that would result from a standard ratings test. Using this calculation method, it was found that the three new air conditioners' measured performance was consistent with their ratings. This method also permits calculation of equivalent SEER for the test articles. Performance datasets were developed across a broad range of indoor and outdoor operating conditions, and used them to generate performance maps.

Winkler, J.; Booten, C.; Christensen, D.; Tomerlin, J.

2013-03-01T23:59:59.000Z

113

Laboratory Performance Testing of Residential Window Mounted Air Conditioners  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Laboratory Performance Testing of Residential Window Mounted Air Conditioners Jon Winkler Chuck Booten Dane Christensen Jeff Tomerlin April 29, 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. Why should we care? * Window AC unit sales dominate US market o 7.5 million units sold in 2011 - 36% more than ducted systems - Approx. 30% of installed capacity o Inexpensive relative to central units o Easy installation o Attractive for retrofits * Need accurate models in whole-building tools o Costs/savings relative to other solutions can be quantified o Spot cooling can reduce energy use, but when, where and by

114

Prototype dish testing and analysis at Sandia National Laboratories  

Science Conference Proceedings (OSTI)

During the past year, Sandia National Laboratories performed on-sun testing of several dish concentrator concepts. These tests were undertaken at the National Solar Thermal Test Facility (NSTTF). Two of the tests were performed in support of the DOE Concentrator Receiver Development Program. The first was on-sun testing of the single-element stretched-membrane dish; this 7-meter diameter dish uses a single preformed metal membrane with an aluminized polyester optical surface and shows potential for future dish-Stirling systems. The next involved two prototype facets from the Faceted Stretched-Membrane Dish Program. These facets, representing competitive design concepts, are closest to commercialization. Five 1-meter triangular facets were tested on-sun as part of the development program for a solar dynamic system on Space Station Freedom. While unique in character, all the tests utilized the Beam Characterization System (BCS) as the main measurement tool and all were analyzed using the Sandia-developed CIRCE2 computer code. The BCS is used to capture and digitize an image of the reflected concentrator beam that is incident on a target surface. The CIRCE2 program provides a computational tool, which when given the geometry of the concentrator and target as well as other design parameters will predict the flux distribution of the reflected beam. One of these parameters, slope error, is the variable that has a major effect in determining the quality of the reflected beam. The methodology used to combine these two tools to predict uniform slope errors for the dishes is discussed in this document. As the Concentrator Development Programs continue, Sandia will test and evaluate two prototype dish systems. The first, the faceted stretched-membrane dish, is expected to be tested in 1992, followed by the full-scale single-element stretched-membrane dish in 1993. These tests will use the tools and methodology discussed in this document. 14 refs., 10 figs., 5 tabs.

Grossman, J.W.; Houser, R.M.; Erdman, W.W.

1991-01-01T23:59:59.000Z

115

Retrofitting Combined Space and Water Heating Systems: Laboratory Tests  

SciTech Connect

Better insulated and tighter homes can often use a single heating plant for both space and domestic water heating. These systems, called dual integrated appliances (DIA) or combination systems, can operate at high efficiency and eliminate combustion safety issues associated by using a condensing, sealed combustion heating plant. Funds were received to install 400 DIAs in Minnesota low-income homes. The NorthernSTAR DIA laboratory was created to identify proper system components, designs, operating parameters, and installation procedures to assure high efficiency of field installed systems. Tests verified that heating loads up to 57,000 Btu/hr can be achieved with acceptable return water temperatures and supply air temperatures.

Schoenbauer, B.; Bohac, D.; Huelman, P.; Olson, R.; Hewitt, M.

2012-10-01T23:59:59.000Z

116

Argonne National Laboratory Terahertz- and Millimeter-Wave Test Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

PROFILE: PROFILE: Argonne Homeland Security Technologies APPLICATIONS A R G O N N E N A T I O N A L L A B O R A T O R Y Terahertz- and Millimeter-Wave Test Facility B E N E F I T S Detect Terrorist-Related Contraband with Terahertz Technology * Spectral "fingerprints" uniquely identify materials * Can identify the factory where explosives and other chemicals were manufactured * Detects minute amounts of chemicals from a distance * Identifies materials in seconds Companies that develop or manufacture instruments to detect terrorist contraband can benefit by using a unique facility at the U.S. Department of Energy's Argonne National Laboratory. Called the Terahertz Test Facility, its sensitive, new instruments - developed at Argonne and available nowhere else in the world - can obtain spectral "fingerprints" that uniquely

117

Standard Hydrogen Test Protocols for the NREL Sensor Testing Laboratory (Brochure)  

DOE Green Energy (OSTI)

This brochure summarizes the test protocols used in the NREL Hydrogen Sensor Test Laboratory for the quantitative assessment of critical analytical performance specifications for hydrogen sensors. Researchers at the NREL Hydrogen Safety Sensor Test Laboratory developed a variety of test protocols to quantitatively assess critical analytical performance specifications for hydrogen sensors. Many are similar to, but typically more rigorous than, the test procedures mandated by ISO Standard 26142 (Hydrogen Detector for Stationary Applications). Specific protocols were developed for linear range, short-term stability, and the impact of fluctuations in temperature (T), pressure (P), relative humidity (RH), and chemical environment. Specialized tests (e.g., oxygen requirement) may also be performed. Hydrogen safety sensors selected for evaluation are subjected to a thorough regimen of test protocols, as described. Sensor testing is performed at NREL on custom-built sensor test fixtures. Environmental parameters such as T, P, RH, and gas composition are rigorously controlled and monitored. The NREL evaluations are performed on commercial hydrogen detectors, on emerging sensing technologies, and for end users to validate sensor performance for specific application needs. Test results and data are shared with the manufacturer or client via summary reports, teleconference phone calls, and, when appropriate, site visits to manufacturer facilities. Client representatives may also monitor NREL's operation while their technologies are being tested. Manufacturers may use test data to illustrate the analytical capability of their technologies and, more importantly, to guide future developments. NREL uses the data to assess technology gaps and deployment considerations. Per NREL Sensor Testing Laboratory policy, test results are treated as proprietary and are not shared with other manufacturers or other entities without permission. The data may be used by NREL in open publications (journal articles, presentations, outreach support, and other reports), but will not be attributed to a specific vendor.

Not Available

2011-12-01T23:59:59.000Z

118

Direct laboratory tensile testing of select yielding rock bolt systems  

SciTech Connect

Yielding rock bolt support systems have been developed to accommodate ground movement in shifting ground such as in coal operations; in creeping ground such as salt, trona, and potash; and in swelling ground associated with some clays. These systems, designed to remain intact despite ground movement, should enhance mine safety and help contain costs in areas where rebolting of rigid non-yielding systems is typically required. Four such systems were tested in straight tensile pulls in the laboratory. They include the Slip Nut System from Dywidag Systems International USA, Inc., Ischebeck`s bolt mounted Titan Load Indicator, Rocky Mountain Bolt Company`s Yielding Cable Bolt, and a rock bolt installed variation of the yielding steel post developed by RE/SPEC Inc. The first two systems are currently marketed products and the latter two are prototype systems. Each system responds to load and displacement by yielding in an unique manner. All are designed to yield at predetermined loads. A description of each system and its yield function is provided. Each system was tested over its prescribed yield range in a test machine. At least five tests were performed on each system. Each system yielded and continued to provide support according to its design. Each shows promise for ground control use in shifting or creeping rock. This work helps to illustrate the comparative differences in performance between these specialized systems and the applications where they may be most useful.

VandeKraats, J.D.; Watson, S.O.

1996-08-01T23:59:59.000Z

119

Laboratory tests of IEC DER object models for grid applications.  

Science Conference Proceedings (OSTI)

This report describes a Cooperative Research and Development Agreement (CRADA) between Salt River Project Agricultural Improvement and Power District (SRP) and Sandia National Laboratories to jointly develop advanced methods of controlling distributed energy resources (DERs) that may be located within SRP distribution systems. The controls must provide a standardized interface to allow plug-and-play capability and should allow utilities to take advantage of advanced capabilities of DERs to provide a value beyond offsetting load power. To do this, Sandia and SRP field-tested the IEC 61850-7-420 DER object model (OM) in a grid environment, with the goal of validating whether the model is robust enough to be used in common utility applications. The diesel generator OM tested was successfully used to accomplish basic genset control and monitoring. However, as presently constituted it does not enable plug-and-play functionality. Suggestions are made of aspects of the standard that need further development and testing. These problems are far from insurmountable and do not imply anything fundamentally unsound or unworkable in the standard.

Blevins, John D. (PE Salt River Project, Phoenix, AZ); Menicucci, David F.; Byrd, Thomas, Jr. (,; .); Gonzalez, Sigifredo; Ginn, Jerry W.; Ortiz-Moyet, Juan (Primecore, Inc.)

2007-02-01T23:59:59.000Z

120

Test Procedure for 170.304 e Clinical Decision Support APPROVED Version 1.1 September 24, 2010  

E-Print Network (OSTI)

; and laboratory test results. 1 Department of Health and Human Services, 45 CFR Part 170 Health Information in 45 CFR Part 170 Subpart C of the Final Rule for Health Information Technology: Initial Set of standards, Implementation Specifications, and Certification Criteria for Electronic Health Record Technology

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Test Procedure for 170.306.c Clinical Decision Support APPROVED Version 1.1 September 24, 2010  

E-Print Network (OSTI)

; and laboratory test results. 1 Department of Health and Human Services, 45 CFR Part 170 Health Information in 45 CFR Part 170 Subpart C of the Final Rule for Health Information Technology: Initial Set of standards, Implementation Specifications, and Certification Criteria for Electronic Health Record Technology

122

Soybean Reference Chemistry and/or NIR Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Whole Soybeans and Soybean Meal. Provided by Soybean Quality Traits (SQT) sponsored by the United Soybean Board. Soybean Reference Chemistry and/or NIR Laboratory Proficiency Testing Program Laboratory Proficiency Progr

123

Transportable Heavy Duty Emissions Testing Laboratory and Research Program  

DOE Green Energy (OSTI)

The objective of this program was to quantify the emissions from heavy-duty vehicles operating on alternative fuels or advanced fuel blends, often with novel engine technology or aftertreatment. In the first year of the program West Virginia University (WVU) researchers determined that a transportable chassis dynamometer emissions measurement approach was required so that fleets of trucks and buses did not need to be ferried across the nation to a fixed facility. A Transportable Heavy-Duty Vehicle Emissions Testing Laboratory (Translab) was designed, constructed and verified. This laboratory consisted of a chassis dynamometer semi-trailer and an analytic trailer housing a full scale exhaust dilution tunnel and sampling system which mimicked closely the system described in the Code of Federal Regulations for engine certification. The Translab was first used to quantify emissions from natural gas and methanol fueled transit buses, and a second Translab unit was constructed to satisfy research demand. Subsequent emissions measurement was performed on trucks and buses using ethanol, Fischer-Tropsch fuel, and biodiesel. A medium-duty chassis dynamometer was also designed and constructed to facilitate research on delivery vehicles in the 10,000 to 20,000lb range. The Translab participated in major programs to evaluate low-sulfur diesel in conjunction with passively regenerating exhaust particulate filtration technology, and substantial reductions in particulate matter were recorded. The researchers also participated in programs to evaluate emissions from advanced natural gas engines with closed loop feedback control. These natural gas engines showed substantially reduced levels of oxides of nitrogen. For all of the trucks and buses characterized, the levels of carbon monoxide, oxides of nitrogen, hydrocarbons, carbon dioxide and particulate matter were quantified, and in many cases non-regulated species such as aldehydes were also sampled. Particle size was also quantified during selected studies. A laboratory was established at WVU to provide for studies which supported and augmented the Translab research, and to provide for development of superior emissions measurement systems. This laboratory research focused on engine control and fuel sulfur issues. In recent years, as engine and aftertreatment technologies advanced, emissions levels were reduced such that they were at or below the Translab detectable limits, and in the same time frame the US Environmental Protection Agency required improved measurement methodologies for engine emissions certification. To remain current and relevant, the researchers designed a new Translab analytic system, housed in a container which can be transported on a semi-trailer. The new system's dilution tunnel flow was designed to use a subsonic venturi with closed loop control of blower speed, and the secondary dilution and particulate matter filter capture were designed to follow new EPA engine certification procedures. A further contribution of the program has been the development of techniques for creating heavy-duty vehicle test schedules, and the creation of schedules to mimic a variety of truck and bus vocations.

David Lyons

2008-03-31T23:59:59.000Z

124

Energy Systems High Pressure Test Laboratory (Fact Sheet), NREL...  

NLE Websites -- All DOE Office Websites (Extended Search)

with energy storage activities such as ultra- capacitors, super conducting magnetic flywheel and mechanical energy storage systems laboratories for an integrated approach to...

125

Results of Laboratory Testing of Advanced Power Strips: Preprint  

Science Conference Proceedings (OSTI)

This paper describes the results of a laboratory investigation to evaluate the technical performance of advanced power strip (APS) devices when subjected to a range of home entertainment center and home office usage scenarios.

Earle, L.; Sparn, B.

2012-08-01T23:59:59.000Z

126

King County Metro Transit: Allison Hybrid Electric Transit Bus Laboratory Testing  

DOE Green Energy (OSTI)

Paper summarizes chassis dynamometer testing of two 60-foot articulated transit buses, one conventional and one hybrid, at NREL's ReFUEL Laboratory. It includes experimental setup, test procedures, and results from vehicle testing performed at the NREL ReFUEL laboratory.

Hayes, R. R.; Williams, A.; Ireland, J.; Walkowicz, K.

2006-09-01T23:59:59.000Z

127

PEP Support Laboratory Leaching and Permeate Stability Tests  

Science Conference Proceedings (OSTI)

Pacific Northwest National Laboratory (PNNL) has been tasked by Bechtel National Inc. (BNI) on the River Protection Project-Hanford Tank Waste Treatment and Immobilization Plant (RPP-WTP) project to perform research and development activities to resolve technical issues identified for the Pretreatment Facility (PTF). The Pretreatment Engineering Platform (PEP) was designed, constructed, and operated as part of a plan to respond to issue M12, "Undemonstrated Leaching Processes," of the External Flowsheet Review Team (EFRT) issue response plan.( ) The PEP is a 1/4.5-scale test platform designed to simulate the WTP pretreatment caustic leaching, oxidative leaching, ultrafiltration solids concentration, and slurry washing processes. The PEP replicates the WTP leaching processes using prototypic equipment and control strategies. A simplified flow diagram of the PEP system is shown in Figure 1.1. Two operating scenarios are currently being evaluated for the ultrafiltration process (UFP) and leaching operations. The first scenario has caustic leaching performed in the UFP-2 ultrafiltration feed vessels (i.e., vessel UFP-VSL-T02A in the PEP and vessels UFP-VSL-00002A and B in the WTP PTF). The second scenario has caustic leaching conducted in the UFP-1 ultrafiltration feed preparation vessels (i.e., vessels UFP-VSL-T01A and B in the PEP and vessels UFP-VSL-00001A and B in the WTP PTF). In both scenarios, 19-M sodium hydroxide solution (NaOH, caustic) is added to the waste slurry in the vessels to leach solid aluminum compounds (e.g., gibbsite, boehmite). Caustic addition is followed by a heating step that uses direct injection of steam to accelerate the leach process. Following the caustic leach, the vessel contents are cooled using vessel cooling jackets and/or external heat exchangers. The main difference between the two scenarios is that for leaching in UFP-VSL-T01A and B, the 19-M NaOH is added to un-concentrated waste slurry (3 to 8 wt% solids), while for leaching in UFP-VSL-T02A, the slurry is concentrated to nominally 20 wt% solids using cross-flow ultrafiltration before adding caustic.

Russell, Renee L.; Peterson, Reid A.; Rinehart, Donald E.; Buchmiller, William C.

2009-09-25T23:59:59.000Z

128

Sandia National Laboratories Electrochemical Storage System Abuse Test Procedure Manual  

DOE Green Energy (OSTI)

The series of tests described in this report are intended to simulate actual use and abuse conditions and internally initiated failures that may be experienced in electrochemical storage systems (ECSS). These tests were derived from Failure Mode and Effect Analysis, user input, and historical abuse testing. The tests are to provide a common framework for various ECSS technologies. The primary purpose of testing is to gather response information to external/internal inputs. Some tests and/or measurements may not be required for some ECSS technologies and designs if it is demonstrated that a test is not applicable, and the measurements yield no useful information.

Unkelhaeuser, Terry; Smallwood David

1999-07-01T23:59:59.000Z

129

High Voltage Laboratory Testing of Femtosecond Laser Lightning Diversion  

Science Conference Proceedings (OSTI)

Lightning strikes cost the electric power industry an estimated 1 billion dollars annually in damage and lost revenue. One possible way of protecting critical and susceptible facilities from lightning strikes is to use lasers to trigger and divert lightning along a predetermined path. This report describes laboratory research on the use of ultrashort UV pulses and near IR pulses to trigger high voltage discharge.

1998-12-09T23:59:59.000Z

130

Sorbent Testing for the Solidification of Unidentified Rocky Flats Laboratory Waste Stored at the Idaho National Laboratory  

Science Conference Proceedings (OSTI)

At the request of the U.S. Department of Energy (DOE), MSE Technology Applications, Inc. (MSE) evaluated various commercially available sorbents to solidify unidentified laboratory liquids from Rocky Flats that are stored at the Idaho National Laboratory (INL). The liquids are a collection of laboratory wastes that were generated from various experiments and routine analytical laboratory activities carried out at Rocky Flats. The liquids are in bottles discovered inside of buried waste drums being exhumed from the subsurface disposal area at the Radioactive Waste Management Complex (RWMC) by the contractor, CH2M Hill Washington International (CWI). Free liquids are unacceptable at the Waste Isolation Pilot Plant (WIPP), and some of these liquids cannot be returned to the retrieval pit. Stabilization of the liquids into a solid mass will allow these materials to be sent to an appropriate disposal location. The selected sorbent or sorbent combinations should produce a stabilized mass that is capable of withstanding conditions similar to those experienced during storage, shipping, and burial. The final wasteform should release less than 1% liquid by volume per the WIPP Waste Acceptance Criteria (WAC). The absence or presence of free liquid in the solidified waste-forms was detected when tested by SW-846, Method 9095B, Paint Filter Free Liquids, and the amount of liquid released from the wasteform was determined by SW-846, Method 9096, Liquid Release Test. Reactivity testing was also conducted on the solidified laboratory liquids. (authors)

Bickford, J. [MSE Technology Applications, Inc., Butte, MT (United States); Kimmitt, R. [CH2M WG Idaho, LLC, Idaho National Laboratory, CF-601, MF-637, MS4201, Scoville, ID (United States)

2007-07-01T23:59:59.000Z

131

Materials Transportation Testing & Analysis at Sandia National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

Testing Testing Doug Ammerman, (505) 845-8158 Type B packages that transport radioactive materials must survive a sequence of full-scale (actual physical size) impact, puncture, fire, and immersion tests designed to replicate transportation accident conditions. The Hypothetical Accident Conditions (six tests as defined in 10 CFR Part 71.73) tests 1 through 4 (Drop, Crush, Puncture and Fire) are sequential, test 5 (Immersion) is performed on either a previously tested or untested package. Free Drop Test Crush Test Puncture Test Thermal Test Immersion Test [drop] Click to view picture [crush] Click to view picture [puncture] Click to view picture [thermal] Click to view picture [immersion] Click to view picture Dropping a package from 30 feet onto an unyielding target. (the unyielding target forces all of the deformation to be in the package, none in the target). The speed on impact is 44 feet per second or 30 miles per hour. Dropping a 1100 pound steel plate from 30 feet onto a package. This test is only required for packages weighing less than 1100 pounds. The speed on impact is 44 feet per second or 30 miles per hour. Dropping a package from 40 inches onto a welded, 6 inch diameter, steel spike. The speed on impact is 14.6 feet per second or 10 miles per hour. Placing a package 40 inches above a pool of burning fuel for 30 minutes at 800 degrees Celsius (1475 degrees Fahrenheit). Placing a package under 50 feet of water for 8 hours. Fissile material packages are also immersed under 3 feet of water for 8 hours sequentially after tests 1 through 4

132

Laboratory tests evaluating the University of South Florida Mobile Data Acquisition System, Type 1  

DOE Green Energy (OSTI)

The University of South Florida Mobile Data Acquisition System, Version 1, was evaluated in battery laboratory bench tests and in conjunction with laboratory dynamometer tests, for accuracy, ease of operation, and performance. Two tests in each of the two environments are reported. The collected data were also used to evaluate the MDAS data conversion software package XRD10.EXE. Test results show only slightly lower accuracy than results from standard laboratory equipment and data reduction procedures. Additional environmental tests were deferred pending receipt of an improved version of the system.

Kiser, D.M.

1995-03-01T23:59:59.000Z

133

Tonopah test range - outpost of Sandia National Laboratories  

Science Conference Proceedings (OSTI)

Tonopah Test Range is a unique historic site. Established in 1957 by Sandia Corporation, Tonopah Test Range in Nevada provided an isolated place for the Atomic Energy Commission to test ballistics and non-nuclear features of atomic weapons. It served this and allied purposes well for nearly forty years, contributing immeasurably to a peaceful conclusion to the long arms race remembered as the Cold War. This report is a brief review of historical highlights at Tonopah Test Range. Sandia`s Los Lunas, Salton Sea, Kauai, and Edgewood testing ranges also receive abridged mention. Although Sandia`s test ranges are the subject, the central focus is on the people who managed and operated the range. Comments from historical figures are interspersed through the narrative to establish this perspective, and at the end a few observations concerning the range`s future are provided.

Johnson, L.

1996-03-01T23:59:59.000Z

134

Renewable Energy System Test and Support Laboratory , T L Pryor2  

E-Print Network (OSTI)

ACRELab Renewable Energy System Test and Support Laboratory T Spooner1 , T L Pryor2 , N Wilmot3 , G for Renewable Energy AUSTRALIA Abstract ACRELab is a new testing laboratory for Renewable Energy (RE) systems. It is located at the headquarters of the Australian CRC for Renewable Energy (ACRE) on the Murdoch University

135

CERTS Microgrid Laboratory Test Bed - PIER Final Project Report  

E-Print Network (OSTI)

and Utility Connected .. 92 CONCLUSION.. 99 II ListUtility Connected mode for Test 10.4.17 .. 215 XV Listutility grid. .. 25 II List

Eto, Joseph H.

2008-01-01T23:59:59.000Z

136

Test Results From The Idaho National Laboratory 15kW High Temperature Electrolysis Test Facility  

DOE Green Energy (OSTI)

A 15kW high temperature electrolysis test facility has been developed at the Idaho National Laboratory under the United States Department of Energy Nuclear Hydrogen Initiative. This facility is intended to study the technology readiness of using high temperature solid oxide cells for large scale nuclear powered hydrogen production. It is designed to address larger-scale issues such as thermal management (feed-stock heating, high temperature gas handling, heat recuperation), multiple-stack hot zone design, multiple-stack electrical configurations, etc. Heat recuperation and hydrogen recycle are incorporated into the design. The facility was operated for 1080 hours and successfully demonstrated the largest scale high temperature solid-oxide-based production of hydrogen to date.

Carl M. Stoots; Keith G. Condie; James E. O'Brien; J. Stephen Herring; Joseph J. Hartvigsen

2009-07-01T23:59:59.000Z

137

Exclusionary manipulation of carbon permit markets: a laboratory test  

E-Print Network (OSTI)

The experiment reported here tests the case of so-called exclusionary manipulation of emission permit markets, i.e., when a dominant firm -- here a monopolist -- increases its holding of permits in order to raise its rivals' ...

Carln, Bjrn.

138

SLAC National Accelerator Laboratory - New Test Bed Probes the...  

NLE Websites -- All DOE Office Websites (Extended Search)

New Test Bed Probes the Origin of Pulses at LCLS By Glenn Roberts Jr. July 23, 2013 It all comes down to one tiny spot on a diamond-cut, highly pure copper plate. That's where...

139

Materials Transportation Testing & Analysis at Sandia National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

RMIR (Radioactive Materials Incident Report) Database Transportation RMIR (Radioactive Materials Incident Report) Database Transportation Accident and Incident Experience,1971-1999 Access Hazardous Materials Information System (HMIS) the primary source of national data for the Federal, state, and local governmental agencies responsible for the safety of hazardous materials transportation. Rail Transport Highway Transport Air Transport The Radioactive Material Incident Report (RMIR) Database was developed in 1981 at the Transportation Technology Center of Sandia National Laboratories (SNL) to support its research and development activities for the U.S. Department of Energy (DOE). This database contains information about radioactive materials transportation incidents that have occurred in the U.S. from 1971 through 1999. These data were drawn from the U.S.

140

Materials Transportation Testing & Analysis at Sandia National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

Analysis Analysis Doug Ammerman, (505) 845-8158 Structural analysis utilizes computer design and analysis tools to provide package designers and certifiers with the most accurate method of determining package response to transportation environments. Computer analysis is an application of known engineering principles that take advantage of high-power computing capabilities in solving the response of computer models to various environments with complex mathematical calculations. It can be used for package certification by generating a computer model of a test object (package) and subjecting it to an accident environment to understand its response. A computer model must be constructed with the same weights, dimensions, hardnesses, specific heat, conduction, etc. as an

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Laboratory Test Report for Six ENERGY STAR Dehumidifiers  

Science Conference Proceedings (OSTI)

This report documents the measured performance of six residential ENERGY STAR vapor compression dehumidifiers. The performance of each was measured over a wide range of inlet air conditions and fit to a numerical model for capacity and efficiency. Performance curves were developed for use in EnergyPlus. Test data from all six dehumidifiers were also fit to generic performance curves. This work can be used by energy modelers and equipment manufacturers to understand how current products will operate in a wide range of environments, and to develop advanced space conditioning systems for efficient, safe, durable and healthy homes.

Winkler, J.; Christensen, D.; Tomerlin, J.

2011-12-01T23:59:59.000Z

142

Form Approved  

U.S. Energy Information Administration (EIA) Indexed Site

Approved Approved OMB No. 1905-0092. El A 457B (Expires May 31, 1990.) This survey is voluntary and authorized under the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended. Information about specific households will be kept strictly confidential. The data will be summarized within large groupings for statistical purposes. 1987 Residential Energy Consumption Survey Energy Information Administration U.S. Department of Energy Location # Housing Unit # 111-116 117-118 EIA 457B * 1987 Residential Energy Consumption Survey TIME INTERVIEW STARTED 1. In what year did your family this (house/apartment)? AM PM move into 01 [ ] Before 1940 02 [ ] 1940-1949 03 [ ] 1950-1959

143

Form Approved  

U.S. Energy Information Administration (EIA) Indexed Site

Approved Approved OMB No. 1905-0092 . EIA 4578 (Expire* August 31,1986} Th|« turvey Is voluntary and authorized under (he Federal Energy Administration Act of 1974 (Public La* 93-275) a* amended. Information about *p*clflc houiehold* will t>* kept strictly confidential. The d*la will be summarized within large grouping! for tatlttlcal purposes. Residential Energy Consumption Survey Fall-Winter* 1984-1985 Energy Information Administration U.S. Department of Energy Location ff. Housing UnN *.. 111-116 117-118 TIME INTERVIEW STARTED 1. In what year did your family this (house/apartment)? AM PM move into 01 [] BEFORE 1940 02 [] 1940-1949 03 [] 1950-1959 04 [] 1960-1964 05 [] 1965-1969 06 [] 1970-1974 07 [] 1975-1976 08 [] 1977-1979 09 [] 1980 10 [] 1981 121 11 [] 1982 122

144

Summary of well-testing activities at Lawrence Berkeley Laboratory, 1975-1983  

DOE Green Energy (OSTI)

Well test data collected from various geothermal fields by the geothermal group at Lawrence Berkeley Laboratory are presented. The type of well tests conducted, the instrumentation used and the data collected are described. Experience gained through interpretation of the data has helped identify problems in test procedures and interpretative methods.

Bodvarsson, M.G.; Benson, S.M.

1983-08-01T23:59:59.000Z

145

Exclusionary Manipulation of Carbon Permit Markets: A Laboratory Test  

E-Print Network (OSTI)

The experiment reported here tests the case of so-called exclusionary manipulation of emission permit markets, i.e., when a dominant firm here a monopolist increases its holding of permits in order to raise its rivals costs and thereby gain more on a product market. Earlier studies have claimed that this type of market manipulation is likely to substantially reduce the social gains of permit trading and even result in negative gains. The experiment designed here parallels institutional and informational conditions likely to hold in real trade with carbon permits among electricity producers. Although the dominant firm withheld supply from the electricity market, the outcome seems to reject the theory of exclusionary manipulation. In later trading periods, closing prices on both markets, permit holdings and total electricity production are near competitive levels. Social gains of emissions trading are higher than in earlier studies. Key words: emissions trading; market power; experiments

Bjrn Carln

2002-01-01T23:59:59.000Z

146

Use an EETD laboratory to test my energy-efficient technology...  

NLE Websites -- All DOE Office Websites (Extended Search)

laboratory to test my energy-efficient technology? And how do I find out more about the User Testbed Facility? NOTICE Due to the current lapse of federal funding, Berkeley Lab...

147

Laboratory Testing of Demand-Response Enabled Household Appliances  

SciTech Connect

With the advent of the Advanced Metering Infrastructure (AMI) systems capable of two-way communications between the utility's grid and the building, there has been significant effort in the Automated Home Energy Management (AHEM) industry to develop capabilities that allow residential building systems to respond to utility demand events by temporarily reducing their electricity usage. Major appliance manufacturers are following suit by developing Home Area Network (HAN)-tied appliance suites that can take signals from the home's 'smart meter,' a.k.a. AMI meter, and adjust their run cycles accordingly. There are numerous strategies that can be employed by household appliances to respond to demand-side management opportunities, and they could result in substantial reductions in electricity bills for the residents depending on the pricing structures used by the utilities to incent these types of responses.The first step to quantifying these end effects is to test these systems and their responses in simulated demand-response (DR) conditions while monitoring energy use and overall system performance.

Sparn, B.; Jin, X.; Earle, L.

2013-10-01T23:59:59.000Z

148

Testing of the Semikron Validation AIPM Unit at Oak Ridge National Laboratory: January 2005  

SciTech Connect

This report documents the electrical tests performed on the Semikron high-voltage automotive integrated power module (AIPM) at the Oak Ridge National Laboratory (ORNL). Testing was performed with an inductive/resistive load and with a motor load at the National Transportation Research Center (NTRC) during the second quarter of FY 2005.

Nelson, S.C.

2005-03-24T23:59:59.000Z

149

Form Approv  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

'JOE I' ':0 'JOE I' ':0 ) e " Flee/romc Form Approv ed by CGIR· 01120195 (8 ./1" United States Government Department of Energy Bonneville Power Administra ion memorandum DATE : uC l J !:' ZD y REPLY TO ATTN OF : KEP-4 SUBJECT: Environmental Clearance Memorandum TO ; Rob Ochs Project Manager - TELM-TPP-3 Proposed Action: Lane-Wendson No.1 Structure 10/5 Access Road Improvement and Pole Replacement Project Budget Information: Work Order # 224549 PP&A Project No.: 1117 Proposed by: Bonneville Power Administration (BPA) Categorical Exclusion Applied (from Sub part 0,10 C.F.R. Part) 021): B 1.3, Routine maintenance activities ... for structures, rights-of-way, infrastructures such as roads, equipment. .. routine maintenance activities, corrective ... .are required to maintain

150

Laboratory tests evaluating the University of South Florida Mobile Data Acquisition System Type 2  

DOE Green Energy (OSTI)

Laboratory tests of the University of South Florida Mobile Data Acquisition System, Version 2, were conducted to evaluate accuracy, susceptibility to temperature changes and vibration, and ease of operation. The collected data were also used to test the MDAS data analysis software package XRD11.EXE. Subject to identified accuracy differences and recommended calibration changes, the system is judged adequate. Confirming in-vehicle tests are planned.

Kiser, D.M. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States); Mersman, C. [Kansas State Univ., Manhattan, KS (United States)

1995-03-01T23:59:59.000Z

151

Interim Report on the Analysis of Argonne National Laboratory LOCA Tests  

Science Conference Proceedings (OSTI)

Experiments being conducted at the Argonne National Laboratory (ANL) will provide information on how light water reactor (LWR) fuel exposed to high burnups will respond to design-basis hypothetical accidents such as the loss of coolant accident (LOCA). EPRI is participating in this program by providing fuel specimens for the tests, analytical support for the design of test configurations, and an independent evaluation of test results in order to determine whether current LOCA criteria remain applicable a...

2003-11-07T23:59:59.000Z

152

Test Procedure for 170.306.a Computerized Provider Order Entry APPROVED Version 1.1 September 24, 2010  

E-Print Network (OSTI)

) Laboratory; and (3) Radiology/Imaging 1 Department of Health and Human Services, 45 CFR Part 170 Health criteria defined in 45 CFR Part 170 Subpart C of the Final Rule for Health Information Technology: Initial Set of standards, Implementation Specifications, and Certification Criteria for Electronic Health

153

Test Procedure for 170.304.a Computerized Provider Order Entry APPROVED Version 1.1 September 24, 2010  

E-Print Network (OSTI)

) Laboratory; and (3) Radiology/imaging 1 Department of Health and Human Services, 45 CFR Part 170 Health criteria defined in 45 CFR Part 170 Subpart C of the Final Rule for Health Information Technology: Initial Set of standards, Implementation Specifications, and Certification Criteria for Electronic Health

154

Materials, Processes and Testing Laboratory. Technical progress report, November 1979-February 1980  

DOE Green Energy (OSTI)

The US Department of Energy has set a 20-year lifetime goal for terrestrial photovoltaic modules. In its capacity as a Photovoltaic Field Test and Application Center, Massachusetts Institute of Technology Lincoln Laboratory has established various experimental test sites, ranging in size from 0.1 to 100 kW of peak power, throughout the United States. These sites contain modules from several manufacturers and serve as test beds for photovoltaic system components. The activities of the Materials, Processes and Testing Laboratory of the Solar Photovoltaic Field Tests and Application Project during the last two months of 1979 and the first two months of 1980 are summarized. Module field inspection, I-V curve plotting, module failure analysis, and module degradation analysis are reported.

Forman, S.E.; Themelis, M.P.

1980-11-30T23:59:59.000Z

155

Small Wind Turbine Testing Results from the National Renewable Energy Laboratory: Preprint  

DOE Green Energy (OSTI)

In 2008, the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) began testing small wind turbines (SWTs) through the Independent Testing project. Using competitive solicitation, five SWTs were selected for testing at the National Wind Technology Center (NWTC). NREL's NWTC is accredited by the American Association of Laboratory Accreditation (A2LA) to conduct duration, power performance, safety and function, power quality, and noise tests to International Electrotechnical Commission (IEC) standards. Results of the tests conducted on each of the SWTs are or will be available to the public on the NREL website. The results could be used by their manufacturers in the certification of the turbines or state agencies to decide which turbines are eligible for state incentives.

Bowen, A.; Huskey, A.; Link, H.; Sinclair, K.; Forsyth, T.; Jager, D.; van Dam, J.; Smith, J.

2010-04-01T23:59:59.000Z

156

Materials, processes and testing laboratory residential technical progress report, October-December 1980, January -February 1981  

DOE Green Energy (OSTI)

The US Department of Energy has set a 20-year lifetime goal for terrestrial photovoltaic modules. In its capacity as a Residential Photovoltaic Field Test and Applications Center, Massachusetts Institute of Technology Lincoln Laboratory has established and is monitoring experimental residential test sites in various locations of the United States. These sites contain either real or simulated residences coupled with photovoltaic modules from several manufacturers as well as the necessary balance-of-system components. Tests reported include visual and electrical inspection of modules, flash testing, and determination of module I-V curves.

Forman, S.E.; Themelis, M.P.

1981-04-15T23:59:59.000Z

157

Evaluation of Emerging Line Inspection Technologies: Results of 2012 Outdoor Laboratory Tests  

Science Conference Proceedings (OSTI)

This report describes outdoor laboratory testing performed in 2012 to evaluate different approaches to establish conductor temperature during a helicopter-based Lidar field survey of an existing overhead transmission line. Establishing conductor temperature during Lidar surveys is necessary to assemble a line model to determine line sags, and thus clearances, under full rating and specified environmental conditions. ...

2013-09-26T23:59:59.000Z

158

Environmental testing philosophy for a Sandia National Laboratories small satellite project  

SciTech Connect

Sandia National Laboratories is the system integrator on a small satellite project. Following the intent of the NASA GEVS document, an integrated test philosophy was formulated to certify the satellite for flight. The purpose of this paper is to present that philosophy.

Cap, J.S.; Rackley, N.G.

1996-03-01T23:59:59.000Z

159

*-9~~I ' DESIGN AND LABORATORY TESTING. OFAN UNEQUAL PARALLEL  

E-Print Network (OSTI)

#12;*-9~~I ' DESIGN AND LABORATORY TESTING. OFAN UNEQUAL PARALLEL -t"~~~I~MULTICOMPRESSOR SUPERMARKET REFRIGERATION SYSTEM WITH A MICROPROCESSOR-BASED ELECTRONIC CONTROL SYSTEM William M. Toscano, Ph new highly energy-efficient supermarket systems. A supermarket refrigeration system consisting of: UI

Oak Ridge National Laboratory

160

The transportable heavy-duty engine emissions testing laboratory. Annual progress report, April 1990--April 1991  

SciTech Connect

West Virginia University has designed and constructed a Transportable Emissions Testing Laboratory for measuring emissions from heavy duty vehicles, such as buses and trucks operating on conventional and alternative fuels. The laboratory facility can be transported to a test site located at, or nearby, the home base of the vehicles to be tested. The laboratory has the capability of measuring vehicle emissions as the vehicle is operated under either transient or steady state loads and speeds. The exhaust emissions from the vehicle is sampled and the levels of the constituents of the emission are measured. The laboratory consists of two major units; a power absorber unit and an emissions measurement unit. A power absorber unit allows for the connection of a dynamic load to the drive train of the vehicle so that the vehicle can be ``driven`` through a test cycle while actually mounted on a stationary test bed. The emissions unit contains instrumentation and equipment which allows for the dilution of the vehicle`s exhaust with air. The diluteed exhaust is sampled and analyzed to measure the level of concentration of those constituents which have been identified to have impact on the clean environment. Sampling probes withdraw diluted exhaust which is supplied to a number of different exhaust gas analysis instruments. The exhaust gas analysis instruments have the capability to measure the levels of the following exhaust gas constituents: carbon monoxide (CO), carbon dioxide (CO{sub 2}), oxides of nitrogen (NO{sub x}), unburned hydrocarbons (HC), formaldehyde (HCHO), methane and particulate matter. Additional instruments or sampling devices can be installed whenever measurements of additional constituents are desired. A computer based, data acquisition system is used to continuously monitor a wide range of parameters important to the operation of the test and to record the test results.

1991-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Sandia National Laboratories/New Mexico existing environmental analyses bounding environmental test facilities.  

Science Conference Proceedings (OSTI)

This report identifies current environmental operating parameters for the various test and support facilities at SNL/NM. The intent of this report is solely to provide the limits which bound the facilities' operations. Understanding environmental limits is important to maximizing the capabilities and working within the existing constraints of each facility, and supports the decision-making process in meeting customer requests, cost and schedule planning, modifications to processes, future commitments, and use of resources. Working within environmental limits ensures that mission objectives will be met in a manner that protects human health and the environment. It should be noted that, in addition to adhering to the established limits, other approvals and permits may be required for specific projects.

May, Rodney A.; Bailey-White, Brenda E. (Sandia Staffing Alliance, LLC, Albuquerque, NM); Cantwell, Amber (Sandia Staffing Alliance, LLC, Albuquerque, NM)

2009-06-01T23:59:59.000Z

162

Laboratory's role in Cold War nuclear weapons testing program focus of  

NLE Websites -- All DOE Office Websites (Extended Search)

70th anniversary lecture 70th anniversary lecture Laboratory's role in Cold War nuclear weapons testing program focus of next 70th anniversary lecture Lab's role in the development of nuclear weapons during the Cold War period will be discussed by Byron Ristvet of the Defense Threat Reduction Agency. September 5, 2013 This photograph captures the expanding fireball of the world's first full-scale hydrogen bomb test, Ivy-Mike, which was conducted Oct. 31, 1952. This photograph captures the expanding fireball of the world's first full-scale hydrogen bomb test, Ivy-Mike, which was conducted Oct. 31, 1952. Contact Steve Sandoval Communications Office (505) 665-9206 Email "Los Alamos National Laboratory's role in conjunction with the Department of Defense in meeting this challenge with new nuclear weapon

163

Test Results From The Idaho National Laboratory Of The NASA Bi-Supported Cell Design  

SciTech Connect

The Idaho National Laboratory has been researching the application of solid-oxide fuel cell technology for large-scale hydrogen production. As a result, the Idaho National Laboratory has been testing various cell designs to characterize electrolytic performance. NASA, in conjunction with the University of Toledo, has developed a new cell concept with the goals of reduced weight and high power density. This paper presents results of the INL's testing of this new solid oxide cell design as an electrolyzer. Gas composition, operating voltage, and other parameters were varied during testing. Results to date show the NASA cell to be a promising design for both high power-to-weight fuel cell and electrolyzer applications.

C Stoots; J O' Brien; T Cable

2009-11-01T23:59:59.000Z

164

Test Results From The Idaho National Laboratory Of The NASA Bi-Supported Cell Design  

DOE Green Energy (OSTI)

The Idaho National Laboratory has been researching the application of solid-oxide fuel cell technology for large-scale hydrogen production. As a result, the Idaho National Laboratory has been testing various cell designs to characterize electrolytic performance. NASA, in conjunction with the University of Toledo, has developed a new cell concept with the goals of reduced weight and high power density. This paper presents results of the INL's testing of this new solid oxide cell design as an electrolyzer. Gas composition, operating voltage, and other parameters were varied during testing. Results to date show the NASA cell to be a promising design for both high power-to-weight fuel cell and electrolyzer applications.

C Stoots; J O'Brien; T Cable

2009-11-01T23:59:59.000Z

165

Battery testing at Argonne National Laboratory. Electric and hybrid propulsion systems, No. 1  

SciTech Connect

Advanced battery technology evaluations are performed under simulated electric-vehicle operating conditions at the Analysis & Diagnostic Laboratory (ADL) of Argonne National Laboratory. The ADL results provide insight into those factors that limit battery performance and life. The ADL facilities include a test laboratory to conduct battery experimental evaluations under simulated application conditions and a post-test analysis laboratory to determine, in a protected atmosphere if needed, component compositional changes and failure mechanisms. This paper summarizes the performance characterizations and life evaluations conducted during FY 1992 on both single cells and multi-cell modules that encompass six battery technologies [Na/S, Li/FeS, Ni/Metal-Hydride, Ni/Zn, Ni/Cd, Ni/Fe]. These evaluations were performed for the Department of Energy, Office of Transportation Technologies, Electric and Hybrid Propulsion Division, and the Electric Power Research Institute. The ADL provides a common basis for battery performance characterization and lie evaluations with unbiased application of tests and analyses. The results help identify the most promising R&D approaches for overcoming battery limitations, and provide battery users, developers, and program managers with a measure of the progress being made in battery R&D programs, a comparison of battery technologies, and basic data for modeling.

DeLuca, W.H.; Gillie, K.R.; Kulaga, J.E.; Smaga, J.A.; Tummillo, A.F.; Webster, C.E.

1992-12-31T23:59:59.000Z

166

Laboratory and Modeling Evaluations in Support of Field Testing for Desiccation at the Hanford Site  

SciTech Connect

The Deep Vadose Zone Treatability Test Plan for the Hanford Central Plateau includes testing of the desiccation technology as a potential technology to be used in conjunction with surface infiltration control to limit the flux of technetium and other contaminants in the vadose zone to the groundwater. Laboratory and modeling efforts were conducted to investigate technical uncertainties related to the desiccation process and its impact on contaminant transport. This information is intended to support planning, operation, and interpretation of a field test for desiccation in the Hanford Central Plateau.

Truex, Michael J.; Oostrom, Martinus; Freedman, Vicky L.; Strickland, Christopher E.; Wietsma, Thomas W.; Tartakovsky, Guzel D.; Ward, Anderson L.

2011-02-23T23:59:59.000Z

167

Materials, Processes and Testing Laboratory. Technical progress report: July, August, September, October 1979  

DOE Green Energy (OSTI)

The US Department of Energy has set a 20-year lifetime goal for terrestrial photovoltaic modules. In its capacity as a Photovoltaic Field Test and Application Center, Massachusetts Institute of Technology Lincoln Laboratory has established various experimental test sites, ranging in size from 0.1 to 25 kW of peak power, throughout the United States. These sites contain modules from several manufacturers and serve as test beds for photovoltaic system components. This report, the sixth in a series of similar reports, summarizes the activities of the Materials, Processes and Testing Laboratory of the Solar Photovoltaic Field Tests and Applications Project during the four-month period, 1 July 1979 through 31 October 1979. During this period, field inspections of test sites at Bryan, Ohio, and Mead, Nebraska, were conducted and are reviewed. An inordinate module failure rate at the University of Texas at Arlington is reviewed and analyzed. Failures and degradation of Mead, Nebraska, modules are analyzed, and the development of testing equipment for PV systems is discussed.

Forman, S.E.; Themelis, M.P.

1980-03-15T23:59:59.000Z

168

Key results of battery performance and life tests at Argonne National Laboratory  

SciTech Connect

Advanced battery technology evaluations are performed under simulated electric vehicle operating conditions at Argonne National Laboratory`s & Diagnostic Laboratory (ADL). The ADL provide a common basis for both performance characterization and life evaluation with unbiased application of tests and analyses. This paper summarizes the performance characterizations and life evaluations conducted in 1991 on twelve single cells and eight 3- to 360-cell modules that encompass six battery technologies (Na/S, Li/MS, Ni/MH, Zn/Br, Ni/Fe, and Pb-Acid). These evaluations were performed for the Department of Energy, Office of Transportation Technologies, Electric and Hybrid Propulsion Division. The results measure progress in battery R & D programs, compare battery technologies, and provide basic data for modeling and continuing R & D to battery users, developers, and program managers.

DeLuca, W.H.; Gillie, K.R.; Kulaga, J.E.; Smaga, J.A.; Tummillo, A.F.; Webster, C.E.

1991-12-31T23:59:59.000Z

169

Passive test cell data for the solar laboratory, Winter 1980-81  

DOE Green Energy (OSTI)

Testing was done during the 1980-81 winter in 400 ft/sup 3/ test cells at the Los Alamos National Laboratory Solar Lab. This testing was done primarily to determine the relative efficiency of various passive solar heating concepts and to obtain data that could be used to validate computer simulation programs. The passive solar systems tested were Trombe wall with and without selective absorber, water wall, phase-change wall, direct gain, a heat-pipe collector, and two sunspace geometries. The heating load coefficient of these cells was roughly 26 Btu/h /sup 0/F and the collector area was 23.4 ft/sup 2/, giving a load collector ratio of approximately 27 Btu//sup 0/F day ft/sup 2/. The test cell configurations and instrumentation are detailed herein, and the resulting data and cell efficiencies are discussed.

McFarland, R.D.

1982-05-01T23:59:59.000Z

170

APPROVAL TO CONTINUE SPONSORSHIP OF  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Competition Competition APPROVAL TO CONTINUE SPONSORSHIP OF THE_[insert the name of the laboratory/site/facility]___ AS A FEDERALLY FUNDED RESEARCH AND DEVELOPMENT CENTER The _[insert the name of the laboratory/site/facility]_ is a Department of Energy (DOE) Federally Funded Research and Development Center (FFRDC) managed and operated by _[insert the name of the contractor]_ under DOE Contract _[insert contract number]_. The current contract, which serves as the sponsoring agreement, expires [insert date]. _[insert one or two sentences briefly describing the laboratory/site/facility mission]_. Federal Acquisition Regulation (FAR) 35.017-4 provides for the Head of the sponsoring Agency to approve the continuance of the sponsorship of the FFRDC.

171

Advanced Control Design and Field Testing for Wind Turbines at the National Renewable Energy Laboratory: Preprint  

DOE Green Energy (OSTI)

Utility-scale wind turbines require active control systems to operate at variable rotational speeds. As turbines become larger and more flexible, advanced control algorithms become necessary to meet multiple objectives such as speed regulation, blade load mitigation, and mode stabilization. At the same time, they must maximize energy capture. The National Renewable Energy Laboratory has developed control design and testing capabilities to meet these growing challenges.

Hand, M. M.; Johnson, K. E.; Fingersh, L. J.; Wright, A. D.

2004-05-01T23:59:59.000Z

172

Lawrence Berkeley laboratory neutral-beam engineering test facility power-supply system  

SciTech Connect

The Lawrence Berkeley Laboratory is upgrading the neutral beam source test facility (NBSTF) into a neutral beam engineering test facility (NBETF) with increased capabilities for the development of neutral beam systems. The NBETF will have an accel power supply capable of 170 kV, 70 A, 30 sec pulse length, 10% duty cycle; and the auxiliary power supplies required for the sources. This paper describes the major components, their ratings and capabilities, and the flexibility designed to accomodate the needs of source development.

Lutz, I.C.; Arthur, C.A.; deVries, G.J.; Owren, H.M.

1981-10-01T23:59:59.000Z

173

EVALUATION OF A TECHNETIUM-99 DETECTOR BASED ON LABORATORY TESTING FOR USE IN IN-SITU VADOSE ZONE APPLICATIONS  

SciTech Connect

This document evaluates the feasibility of in-situ detection of technetium-99 in Hanford Site vadose zone soils (the soils between the surface and groundwater) using laboratory tests. The detector system performs adequately for high technetium concentration, but more development and laboratory testing is needed before field demonstration is performed.

MANN FM; MYERS DA

2009-09-11T23:59:59.000Z

174

Improving Ventilation and Saving Energy: Laboratory Study in a Modular Classroom Test Bed  

E-Print Network (OSTI)

HVAC: Improving and Saving Energy (IVSE) Laboratory StudyHVAC: Improving and Saving Energy (IVSE) Laboratory StudyHVAC: Improving and Saving Energy (IVSE) Laboratory Study

2005-01-01T23:59:59.000Z

175

Laboratory and field testing of an aerosol-based duct-sealing technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratory and field testing of an aerosol-based duct-sealing technology Laboratory and field testing of an aerosol-based duct-sealing technology for large commercial buildings. Title Laboratory and field testing of an aerosol-based duct-sealing technology for large commercial buildings. Publication Type Journal Article LBNL Report Number LBNL-44220 Year of Publication 2002 Authors Carrié, François Rémi, Ronnen M. Levinson, Tengfang T. Xu, Darryl J. Dickerhoff, William J. Fisk, Jennifer A. McWilliams, Mark P. Modera, and Duo Wang Journal ASHRAE Transactions Start Page Chapter Date Published January 2002 Abstract Laboratory and field experiments were performed to evaluate the feasibility of sealing leaks in commercial duct systems with an aerosol sealant. The method involves blowing an aerosol through the duct system to seal the leaks from the inside, the principle being that the aerosol particles deposit in the cracks as they try to escape under pressure. It was shown that the seals created with the current sealant material can withstand pressures far in excess of what is found in commercial-building duct systems. We also performed two field experiments in two large-commercial buildings. The ASHRAE leakage classes of the systems were reduced from 653 down to 103, and from 40 down to 3. Methods and devices specifically devised for this application proved to be very efficient at (a) increasing the sealing rate and (b) attaining state-of-the-art duct leakage classes. Additional research is needed to improve the aerosol injection and delivery processes.

176

Silica Deposition in Field and Laboratory Thermal Tests of Yucca Mountain Tuff  

SciTech Connect

A field thermal test was conducted by the Yucca Mountain Site Characterization Project to observe changes in the Topopah Spring Tuff middle nonlithophysal zone geohydrologic system due to thermal loading. A laboratory-scale crushed-tuff hydrothermal column test was used to investigate the tuff as a potential construction material within a nuclear-waste repository. Results of similar column tests have been cited as indications that silica deposition would plug the rock fractures above a repository and create unfavorable drainage conditions. Data from field and laboratory tests are used here to predict the magnitude of fracture sealing. For the crushed-tuff column test, a one-meter-high column was packed with crushed tuff to a porosity of about 50%. Water filling the lowermost 10 cm of the column was boiled and the vapor condensed at the top of the column, percolating down to the boiling zone. After 100 days, intergranular pore space in the saturated portion of the column was almost filled with amorphous silica. The Drift Scale Test at Yucca Mountain is a heating test in the unsaturated zone. It consists of a four-year heating phase, now complete, followed by a four-year cooling phase. Heaters in a 60-m-long drift and in the adjacent rock have heated the drift walls to 200 C. As the rock was heated, fluids naturally present in the rock migrated away from the heat sources. A boiling zone now separates an inner dry-out zone from an outer condensation zone. A heat-pipe region exists in the outer margin of the boiling zone above the heated drift. Amorphous silica coatings up to a few micrometers thick were deposited in this region. Deposits were observed in less than 10% of the fractures in the heat pipe region. Drift-scale test results yield a silica deposition rate of about 250 {micro}m/1000 years in 10% of the fractures in the heat-pipe region. We did not calculate deposition rates from our column test, but a rate of 9.1 mm/1000 years in all fractures of the heat-pipe region is predicted by Sun and Rimstidt (2002) from the results of a similar test. We believe the rate based on field-test observations is a better prediction because the field test more closely resembles the expected environment in a repository. Rates based on column-test results may be reasonable for local zones of preferred fluid flow.

S.S. Levy; S.J. Chipera; M.G. Snow

2002-08-30T23:59:59.000Z

177

Qualification High Voltage Testing of Short Triax HTS Cables in the Laboratory  

Science Conference Proceedings (OSTI)

In order to qualify the electrical insulation design of future HTS cables installed in the electric grid, a number of high voltage qualification tests are generally performed in the laboratory on either single-phase model cables and/or actual three-phase cable samples. Prior to installation of the 200-m Triax HTS cable at the American Electric Power Bixby substation near Columbus, Ohio, in September, 2006, such tests were conducted on both single-phase model cables made at ORNL and tri-axial cable sections cut off from cable made on a production run. The three-phase tri-axial design provides some specific testing challenges since the ground shield and three phases are concentric about a central former with each phase separated by dielectric tape insulation immersed in liquid nitrogen. The samples were successfully tested and qualified for partial discharge inception, AC withstand, and lightning impulse where voltage is applied to one phase with the other phases grounded. In addition one of the phase pairs was tested for dc withstand as a ldquoworst caserdquo scenario to simulate the effect of VLF (Very Low Frequency) tests on the actual cable installed at the Bixby site. The model and prototype cables will be described and the high voltage test results summarized.

James, David Randy [ORNL; Sauers, Isidor [ORNL; Ellis, Alvin R [ORNL; Tuncer, Enis [ORNL; Gouge, Michael J [ORNL; Demko, Jonathan A [ORNL; Duckworth, Robert C [ORNL; Rey, Christopher M [ORNL

2009-01-01T23:59:59.000Z

178

Materials, Processes and Testing Laboratory technical progress report: July, August, September, October 1981  

DOE Green Energy (OSTI)

Test experiences with photovoltaic modules at various experimental photovoltaic test facilities are detailed. Specific details are given for module failure analyses conducted between December 1979 and July 1981. An analysis of broken interconnects is presented, as is a comparison of the insolations measured by a reference cell and a pyranometer. Modules and many components of a photovoltaic system are evaluated at a Systems Test Facility, two of which are a 25-kWp array field at the Mead Field Station of the University of Nebraska, and a 100-kWp array field at the Natural Bridges National Monument in Utah. Failed modules are also analyzed from the Mount Washington Endurance Test Site in New Hampshire, the Lincoln Laboratory Rooftop Test Bed, the Florida Solar Energy Center, the Radio Station Test Site at Bryan, Ohio, and the University of Texas at Arlington. Also reported is a search for electrical anomalies in the array field at the Natural Bridges National Monument test site. (LEW)

Forman, S.E.; Themelis, M.P.

1982-01-30T23:59:59.000Z

179

Key results of battery performance and life tests at Argonne National Laboratory  

SciTech Connect

Advanced battery technology evaluations are performed under simulated electric vehicle operating conditions at Argonne National Laboratory's Diagnostic Laboratory (ADL). The ADL provide a common basis for both performance characterization and life evaluation with unbiased application of tests and analyses. This paper summarizes the performance characterizations and life evaluations conducted in 1991 on twelve single cells and eight 3- to 360-cell modules that encompass six battery technologies (Na/S, Li/MS, Ni/MH, Zn/Br, Ni/Fe, and Pb-Acid). These evaluations were performed for the Department of Energy, Office of Transportation Technologies, Electric and Hybrid Propulsion Division. The results measure progress in battery R D programs, compare battery technologies, and provide basic data for modeling and continuing R D to battery users, developers, and program managers.

DeLuca, W.H.; Gillie, K.R.; Kulaga, J.E.; Smaga, J.A.; Tummillo, A.F.; Webster, C.E.

1991-01-01T23:59:59.000Z

180

Key results of battery performance and life tests at Argonne National Laboratory  

SciTech Connect

Advanced battery technology evaluations are performed under simulated electric vehicle operating conditions at Argonne National Laboratory's Diagnostic Laboratory (ADL). The ADL provide a common basis for both performance characterization and life evaluation with unbiased application of tests and analyses. This paper summarizes the performance characterizations and life evaluations conducted in 1991 on twelve single cells and eight 3- to 360-cell modules that encompass six battery technologies (Na/S, Li/MS, Ni/MH, Zn/Br, Ni/Fe, and Pb-Acid). These evaluations were performed for the Department of Energy, Office of Transportation Technologies, Electric and Hybrid Propulsion Division. The results measure progress in battery R D programs, compare battery technologies, and provide basic data for modeling and continuing R D to battery users, developers, and program managers.

DeLuca, W.H.; Gillie, K.R.; Kulaga, J.E.; Smaga, J.A.; Tummillo, A.F.; Webster, C.E.

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Evaluation of Cavity Collapse and Surface Crater Formation for Selected Lawrence Livermore National Laboratory Tests - 2011  

SciTech Connect

This report evaluates collapse evolution for selected Lawrence Livermore National Laboratory (LLNL) underground nuclear tests at the Nevada National Security Site (NNSS, formerly called the Nevada Test Site). The work is being done at the request of National Security Technologies, LLC (NSTec) and supports the Department of Energy, National Nuclear Security Administration for the Nevada Site Office Borehole Management Program (BMP). The primary objective of this program is to close (plug) weapons program legacy boreholes that are deemed no longer useful. Safety decisions must be made before a crater area, or potential crater area, can be reentered for any work. Our statements on cavity collapse and crater formation are input into their safety decisions. The BMP is an on-going program to address hundreds of boreholes at the NTS. Each year NSTec establishes a list of holes to be addressed. They request the assistance of the Lawrence Livermore National Laboratory and Los Alamos National Laboratory Containment Programs to provide information related to the evolution of collapse history and make statements on completeness of collapse as relates to surface crater stability. These statements do not include the effects of erosion that may modify the collapse craters over time. They also do not address possible radiation dangers that may be present. Subject matter experts from the LLNL Containment Program who had been active in weapons testing activities performed these evaluations. Information used included drilling and hole construction, emplacement and stemming, timing and sequence of the selected test and nearby tests, geology, yield, depth of burial, collapse times, surface crater sizes, cavity and crater volume estimations, ground motion, and radiological release information. Both classified and unclassified data were reviewed. Various amounts of information are available for these tests, depending on their age and other associated activities. Lack of data can hamper evaluations and introduce uncertainty. We make no attempt to quantify this uncertainty. The following unclassified summary statements describe collapse evolution and crater stability in response to a recent request to review 3 LLNL test locations in areas 2 and 12: Kennebec in U2af, Cumberland in U2e, and Yuba in U12b.10.

Pawloski, G A

2011-02-28T23:59:59.000Z

182

Reactive Power Laboratory: Synchronous Condenser Testing&Modeling Results - Interim Report  

Science Conference Proceedings (OSTI)

The subject report documents the work carried out by Oak Ridge National Laboratory (ORNL) during months 5-7 (May-July 2005) of a multi-year research project. The project has the overall goal of developing methods of incorporating distributed energy (DE) that can produce reactive power locally and for injecting into the distribution system. The objective for this new type of DE is to be able to provide voltage regulation and dynamic reactive power reserves without the use of extensive communication and control systems. The work performed over this three-month period focused on four aspects of the overall objective: (1) characterization of a 250HP (about 300KVAr) synchronous condenser (SC) via test runs at the ORNL Reactive Power Laboratory; (2) development of a data acquisition scheme for collecting the necessary voltage, current and power readings at the synchronous condenser and on the distribution system; (3) development of algorithms for analyzing raw test data from the various test runs; and (4) validation of a steady-state model for the synchronous condenser via the use of a commercial software package to study its effects on the ORNL 13.8/2.4kV distribution network.

Henry, SD

2005-09-27T23:59:59.000Z

183

Integrated safeguards testing laboratories in support of the advanced fuel cycle initiative  

SciTech Connect

A key enabler for advanced fuel cycle safeguards research and technology development for programs such as the Advanced Fuel Cycle Initiative (AFCI) is access to facilities and nuclear materials. This access is necessary in many cases in order to ensure that advanced safeguards techniques and technologies meet the measurement needs for which they were designed. One such crucial facility is a hot cell based laboratory which would allow developers from universities, national laboratories, and commercial companies to perform iterative research and development of advanced safeguards instrumentation under realistic operating conditions but not be subject to production schedule limitations. The need for such a facility arises from the requirement to accurately measure minor actinide and/or fission product bearing nuclear materials that cannot be adequately shielded in glove boxes. With the contraction of the DOE nuclear complex following the end of the cold war, many suitable facilities at DOE sites are increasingly costly to operate and are being evaluated for closure. A hot cell based laboratory that allowed developers to install and remove instrumentation from the hot cell would allow for both risk mitigation and performance optimization of the instrumentation prior to fielding equipment in facilities where maintenance and repair of the instrumentation is difficult or impossible. These benefits are accomplished by providing developers the opportunity to iterate between testing the performance of the instrumentation by measuring realistic types and amounts of nuclear material, and adjusting and refining the instrumentation based on the results of these measurements. In this paper, we review the requirements for such a facility using the Wing 9 hot cells in the Los Alamos National Laboratory's Chemistry and Metallurgy Research facility as a model for such a facility and describe recent use of these hot cells in support of AFCI.

Santi, Peter A [Los Alamos National Laboratory; Demuth, Scott F [Los Alamos National Laboratory; Klasky, Kristen L [Los Alamos National Laboratory; Lee, Haeok [Los Alamos National Laboratory; Miller, Michael C [Los Alamos National Laboratory; Sprinkle, James K [Los Alamos National Laboratory; Tobin, Stephen J [Los Alamos National Laboratory; Williams, Bradley [DOE, NE

2009-01-01T23:59:59.000Z

184

Heat leak testing of a superconducting RHIC dipole magnet at Brookhaven National Laboratory  

SciTech Connect

Brookhaven National Laboratory is currently performing heat load tests on a superconducting dipole magnet. The magnet is a prototype of the 360, 8 cm bore, arc dipole magnets that will be used in the Relativistic Heavy Ion Collider (RMC). An accurate measurement of the heat load is needed to eliminate cumulative errors when determining the REUC cryogenic system load requirements. The test setup consists of a dipole positioned between two quadrupoles in a common vacuum tank and heat shield. Piping and instrumentation are arranged to facilitate measurement of the heat load on the primary 4.6 K magnet load and the secondary 55 K heat shield load. Initial results suggest that the primary heat load is well below design allowances. The secondary load was found to be higher than estimated, but remained close to the budgeted amount. Overall, the dipole performed to specifications.

DeLalio, J.T.; Brown, D.P.; Sondericker, J.H.

1993-09-01T23:59:59.000Z

185

High Temperature Solid-Oxide Electrolyzer 2500 Hour Test Results At The Idaho National Laboratory  

DOE Green Energy (OSTI)

The Idaho National Laboratory (INL) has been developing the concept of using solid oxide fuel cells as electrolyzers for large-scale, high-temperature (efficient), hydrogen production. This program is sponsored by the U.S. Department of Energy under the Nuclear Hydrogen Initiative. Utilizing a fuel cell as an electrolyzer introduces some inherent differences in cell operating conditions. In particular, the performance of fuel cells operated as electrolyzers degrades with time faster. This issue of electrolyzer cell and stack performance degradation over time has been identified as a major barrier to technology development. Consequently, the INL has been working together with Ceramatec, Inc. (Salt Lake City, Utah) to improve the long-term performance of high temperature electrolyzers. As part of this research partnership, the INL conducted a 2500 hour test of a Ceramatec designed and produced stack operated in the electrolysis mode. This paper will provide a summary of experimental results to date for this ongoing test.

Carl Stoots; James O'Brien; Stephen Herring; Keith Condie; Lisa Moore-McAteer; Joseph J. Hartvigsen; Dennis Larsen

2009-11-01T23:59:59.000Z

186

Final Environmental Assessment for the Test Capabilities Revitalization at Sandia National Laboratories/New Mexico  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 6 Final Environmental Assessment for the Test Capabilities Revitalization at Sandia National Laboratories/New Mexico D E P A R T M E N T O F E N E R G Y U N I T E D S T A T E S O F A M E R I C A January 2003 Department of Energy, Office of Kirtland Site Operations Kirtland Air Force Base, Albuquerque New Mexico Test Capabilities Revitalization Environmental Assessment January 2003 Department of Energy Office of Kirtland Site Operations i TABLE OF CONTENTS 1.0 PURPOSE AND NEED FOR AGENCY ACTION ........................................................... 1 2.0 NO ACTION AND PROPOSED ACTION ALTERNATIVES........................................ 2 2.1 EXISTING FACILITIES ...........................................................................................................

187

Design of an Integrated Laboratory Scale Test for Hydrogen Production via High Temperature Electrolysis  

DOE Green Energy (OSTI)

The Idaho National Laboratory (INL) is researching the feasibility of high-temperature steam electrolysis for high-efficiency carbon-free hydrogen production using nuclear energy. Typical temperatures for high-temperature electrolysis (HTE) are between 800-900C, consistent with anticipated coolant outlet temperatures of advanced high-temperature nuclear reactors. An Integrated Laboratory Scale (ILS) test is underway to study issues such as thermal management, multiple-stack electrical configuration, pre-heating of process gases, and heat recuperation that will be crucial in any large-scale implementation of HTE. The current ILS design includes three electrolysis modules in a single hot zone. Of special design significance is preheating of the inlet streams by superheaters to 830C before entering the hot zone. The ILS system is assembled on a 10 x 16 skid that includes electronics, power supplies, air compressor, pumps, superheaters, , hot zone, condensers, and dew-point sensor vessels. The ILS support system consists of three independent, parallel supplies of electrical power, sweep gas streams, and feedstock gas mixtures of hydrogen and steam to the electrolysis modules. Each electrolysis module has its own support and instrumentation system, allowing for independent testing under different operating conditions. The hot zone is an insulated enclosure utilizing electrical heating panels to maintain operating conditions. The target hydrogen production rate for the ILS is 5000 Nl/hr.

G.K. Housley; K.G. Condie; J.E. O'Brien; C. M. Stoots

2007-06-01T23:59:59.000Z

188

TEMPERATURE MONITORING OPTIONS AVAILABLE AT THE IDAHO NATIONAL LABORATORY ADVANCED TEST REACTOR  

SciTech Connect

As part of the Advanced Test Reactor National Scientific User Facility (ATR NSUF) program, the Idaho National Laboratory (INL) has developed in-house capabilities to fabricate, test, and qualify new and enhanced sensors for irradiation testing. To meet recent customer requests, an array of temperature monitoring options is now available to ATR users. The method selected is determined by test requirements and budget. Melt wires are the simplest and least expensive option for monitoring temperature. INL has recently verified the melting temperature of a collection of materials with melt temperatures ranging from 100 to 1000 C with a differential scanning calorimeter installed at INLs High Temperature Test Laboratory (HTTL). INL encapsulates these melt wires in quartz or metal tubes. In the case of quartz tubes, multiple wires can be encapsulated in a single 1.6 mm diameter tube. The second option available to ATR users is a silicon carbide temperature monitor. The benefit of this option is that a single small monitor (typically 1 mm x 1 mm x 10 mm or 1 mm diameter x 10 mm length) can be used to detect peak irradiation temperatures ranging from 200 to 800 C. Equipment has been installed at INLs HTTL to complete post-irradiation resistivity measurements on SiC monitors, a technique that has been found to yield the most accurate temperatures from these monitors. For instrumented tests, thermocouples may be used. In addition to Type-K and Type-N thermocouples, a High Temperature Irradiation Resistant ThermoCouple (HTIR-TC) was developed at the HTTL that contains commercially-available doped molybdenum paired with a niobium alloy thermoelements. Long duration high temperature tests, in furnaces and in the ATR and other MTRs, demonstrate that the HTIR-TC is accurate up to 1800 C and insensitive to thermal neutron interactions. Thus, degradation observed at temperatures above 1100 C with Type K and N thermocouples and decalibration due to transmutation with tungsten-rhenium and platinum rhodium thermocouples can be avoided. INL is also developing an Ultrasonic Thermometry (UT) capability. In addition to small size, UTs offer several potential advantages over other temperature sensors. Measurements may be made near the melting point of the sensor material, potentially allowing monitoring of temperatures up to 3000 C. In addition, because no electrical insulation is required, shunting effects are avoided. Most attractive, however, is the ability to introduce acoustic discontinuities to the sensor, as this enables temperature measurements at several points along the sensor length. As discussed in this paper, the suite of temperature monitors offered by INL is not only available to ATR users, but also to users at other MTRs.

J.E. Daw; J.L. Rempe; D.L. Knudson; T. Unruh; B.M. Chase; K.L Davis

2012-03-01T23:59:59.000Z

189

Improving Ventilation and Saving Energy: Laboratory Study in a Modular Classroom Test Bed  

E-Print Network (OSTI)

and Saving Energy (IVSE) Laboratory Study Glossary SpecificEnergy (IVSE) Laboratory Study Table of Contents Table of Contents i Glossary.

2005-01-01T23:59:59.000Z

190

A retrospective survey of the use of laboratory tests to simulate internal combustion engine materials tribology problems  

DOE Green Energy (OSTI)

Progress in the Field of tribology strongly parallels, and has always been strongly driven by, developments and needs in transportation and related industries. Testing of candidate materials for internal combustion engine applications has historically taken several routes: (1) replacement of parts in actual engines subjected to daily use, (2) testing in special, instrumented test engines, (3) and simulative testing in laboratory tribometers using relatively simple specimens. The advantages and disadvantages of each approach are reviewed using historical examples. A four-decade, retrospective survey of the tribomaterials literature focused on the effectiveness of laboratory simulations for engine materials screening. Guidelines for designing and ducting successful tribology laboratory simulations will be discussed. These concepts were used to design a valve wear simulator at Oak Ridge National Laboratory.

Blau, P.J.

1992-12-31T23:59:59.000Z

191

Deep Frying: Chemistry, Nutrition and Practical ApplicationsChapter 16 General Considerations for Designing Laboratory Scale Fry-Tests  

Science Conference Proceedings (OSTI)

Deep Frying: Chemistry, Nutrition and Practical Applications Chapter 16 General Considerations for Designing Laboratory Scale Fry-Tests Food Science Health Nutrition Biochemistry eChapters Food Science & Technology Health - Nutrition -

192

RECENT ADVANCES IN HIGH TEMPERATURE ELECTROLYSIS AT IDAHO NATIONAL LABORATORY: STACK TESTS  

DOE Green Energy (OSTI)

High temperature steam electrolysis is a promising technology for efficient sustainable large-scale hydrogen production. Solid oxide electrolysis cells (SOECs) are able to utilize high temperature heat and electric power from advanced high-temperature nuclear reactors or renewable sources to generate carbon-free hydrogen at large scale. However, long term durability of SOECs needs to be improved significantly before commercialization of this technology. A degradation rate of 1%/khr or lower is proposed as a threshold value for commercialization of this technology. Solid oxide electrolysis stack tests have been conducted at Idaho National Laboratory to demonstrate recent improvements in long-term durability of SOECs. Electrolytesupported and electrode-supported SOEC stacks were provided by Ceramatec Inc., Materials and Systems Research Inc. (MSRI), and Saint Gobain Advanced Materials (St. Gobain), respectively for these tests. Long-term durability tests were generally operated for a duration of 1000 hours or more. Stack tests based on technology developed at Ceramatec and MSRI have shown significant improvement in durability in the electrolysis mode. Long-term degradation rates of 3.2%/khr and 4.6%/khr were observed for MSRI and Ceramatec stacks, respectively. One recent Ceramatec stack even showed negative degradation (performance improvement) over 1900 hours of operation. A three-cell short stack provided by St. Gobain, however, showed rapid degradation in the electrolysis mode. Improvements on electrode materials, interconnect coatings, and electrolyteelectrode interface microstructures contribute to better durability of SOEC stacks.

X, Zhang; J. E. O'Brien; R. C. O'Brien; J. J. Hartvigsen; G. Tao; N. Petigny

2012-07-01T23:59:59.000Z

193

Performance testing of radiobioassay laboratories: in-vivo measurements, pilot study report  

Science Conference Proceedings (OSTI)

This document describes a project to evaluate the in-vivo counting performance criteria of draft ANSI Standard N13.30, Performance Criteria for Radiobioassay. The draft ANSI Standard provides guidance to in-vivo counting facilities regarding the precision and accuracy of measurements for certain categories of commonly assayed radionuclides and critical regions of the body. The draft ANSI Standard was evaluated by conducting an intercomparison test involving a number of whole-body counting facilities. The testing involved three types of measurements: chest counting for detection of radioactive materials in the lung, whole-body counting for detection of uniformly distributed activity, and neck counting for detection of radioactive material concentrated in the thyroid. Results of the first-round intercomparison test are presented in this report. The appropriateness of the draft Standard performance criteria was judged by the measurement results reported by participating in-vivo counting facilities. The intercomparison testing showed that some laboratories had difficulty meeting the performance criteria specified in the draft ANSI Standard N13.30.

Robinson, A.V.; Fisher, D.R.; Reece, W.D.; MacLellan, J.A.

1986-10-01T23:59:59.000Z

194

First laboratory perforating tests in coal show lower-than-expected penetration  

Science Conference Proceedings (OSTI)

Worldwide Coal Bed Methane (CBM) resources are huge, estimated at 3,000 to 9,000 Tcf. The production rate from CBM reservoirs is low, perhaps 50-100 mcf/day. Various completion methods are being evaluated and new technologies are being developed with the aim of increasing production rates. Considering this interest and activity level, little attention has been paid to the CBM completion fundamentals. Perforating is a critical part of this process, especially considering the PRB development migration from single-coal, open-hole completions into multi-zone, cased-hole completions. This paper describes the first known laboratory-testing program to investigate shaped charge penetration in coal targets. We describe mechanical properties of the coals tested, and penetration results for different shaped charges (of different designs), shot at various stress conditions. CT scan and cutaway imaging of the perforation tunnels are also discussed. Tests were conducted under dry and saturated conditions. The preliminary experiments reported here indicate that shaped charge penetration in coal is significantly less than expected, considering the target's density and strength. The authors provide insight into what may be the reasons for these unexpected results and recommend a path forward for shaped charge testing, designs, predictive tools, and how to optimize CBM completions.

Snider, P.M.; Walton, I.C.; Skinner, T.K.; Atwood, D.C.; Grove, B.M.; Graham, C.

2008-06-15T23:59:59.000Z

195

Overview of fiber radiation effects testing at the Los Alamos National Laboratory  

SciTech Connect

Fiber optics offer potential benefits in diagnostic measurements associated with nuclear testing. Such applications require that optical fibers be located in close proximity to a nuclear test and provide a reliable data transmission path during exposure to intense radiation. The Los Alamos effort has thus concentrated on measurement and understanding of radiation effects in optical fibers at very short times (< 100 ns) after (and during) irradiation. This is in contrast to most other studies that concentrate on times of interest in military, nuclear power, or standard telecommunication applications (1 ms to years). The Los Alamos program has included laboratory tests with intense electron pulse facilities (Febetron 705 and 706) and a fast pulsed electron linac (located at EG and G, Inc. in Santa Barbara, California). In addition, several measurements have been conducted on nuclear tests and some of that data has been released in unclassified publications. This program has used fibers for many data transmission applications. Fibers have also been used as signal transducers by utilizing radiation-to-light conversion processes within the fiber. Past, present, and future activities in this program are discussed.

Lyons, P.B.

1983-01-01T23:59:59.000Z

196

RECENT ADVANCES IN HIGH TEMPERATURE ELECTROLYSIS AT IDAHO NATIONAL LABORATORY: SINGLE CELL TESTS  

DOE Green Energy (OSTI)

An experimental investigation on the performance and durability of single solid oxide electrolysis cells (SOECs) is under way at the Idaho National Laboratory. In order to understand and mitigate the degradation issues in high temperature electrolysis, single SOECs with different configurations from several manufacturers have been evaluated for initial performance and long-term durability. A new test apparatus has been developed for single cell and small stack tests from different vendors. Single cells from Ceramatec Inc. show improved durability compared to our previous stack tests. Single cells from Materials and Systems Research Inc. (MSRI) demonstrate low degradation both in fuel cell and electrolysis modes. Single cells from Saint Gobain Advanced Materials (St. Gobain) show stable performance in fuel cell mode, but rapid degradation in the electrolysis mode. Electrolyte-electrode delamination is found to have significant impact on degradation in some cases. Enhanced bonding between electrolyte and electrode and modification of the microstructure help to mitigate degradation. Polarization scans and AC impedance measurements are performed during the tests to characterize the cell performance and degradation.

X. Zhang; J. E. O'Brien; R. C. O'Brien

2012-07-01T23:59:59.000Z

197

Lawrence Livermore National Laboratory underground coal gasification data base. [US DOE-supported field tests; data  

SciTech Connect

The Department of Energy has sponsored a number of field projects to determine the feasibility of converting the nation's vast coal reserves into a clean efficient energy source via underground coal gasification (UCG). Due to these tests, a significant data base of process information has developed covering a range of coal seams (flat subbituminous, deep flat bituminous and steeply dipping subbituminous) and processing techniques. A summary of all DOE-sponsored tests to data is shown. The development of UCG on a commercial scale requires involvement from both the public and private sectors. However, without detailed process information, accurate assessments of the commercial viability of UCG cannot be determined. To help overcome this problem the DOE has directed the Lawrence Livermore National Laboratory (LLNL) to develop a UCG data base containing raw and reduced process data from all DOE-sponsored field tests. It is our intent to make the data base available upon request to interested parties, to help them assess the true potential of UCG.

Cena, R. J.; Thorsness, C. B.

1981-08-21T23:59:59.000Z

198

ENHANCED THERMAL VACUUM TEST CAPABILITY FOR RADIOISOTOPE POWER SYSTEMS AT THE IDAHO NATIONAL LABORATORY BETTER SIMULATES ENVIRONMENTAL CONDITIONS OF SPACE  

DOE Green Energy (OSTI)

The Idaho National Laboratory (INL) is preparing to fuel and test the Advanced Stirling Radioisotope Generator (ASRG), the next generation space power generator. The INL identified the thermal vacuum test chamber used to test past generators as inadequate. A second vacuum chamber was upgraded with a thermal shroud to process the unique needs and to test the full power capability of the new generator. The thermal vacuum test chamber is the first of its kind capable of testing a fueled power system to temperature that accurately simulate space. This paper outlines the new test and set up capabilities at the INL.

J. C. Giglio; A. A. Jackson

2012-03-01T23:59:59.000Z

199

Project Management Plan for the Idaho National Engineering Laboratory Waste Isolation Pilot Plant Experimental Test Program  

SciTech Connect

EG&G Idaho, Inc. and Argonne National Laboratory-West (ANL-W) are participating in the Idaho National Engineering Laboratory`s (INEL`s) Waste Isolation Pilot Plant (WIPP) Experimental Test Program (WETP). The purpose of the INEL WET is to provide chemical, physical, and radiochemical data on transuranic (TRU) waste to be stored at WIPP. The waste characterization data collected will be used to support the WIPP Performance Assessment (PA), development of the disposal No-Migration Variance Petition (NMVP), and to support the WIPP disposal decision. The PA is an analysis required by the Code of Federal Regulations (CFR), Title 40, Part 191 (40 CFR 191), which identifies the processes and events that may affect the disposal system (WIPP) and examines the effects of those processes and events on the performance of WIPP. A NMVP is required for the WIPP by 40 CFR 268 in order to dispose of land disposal restriction (LDR) mixed TRU waste in WIPP. It is anticipated that the detailed Resource Conservation and Recovery Act (RCRA) waste characterization data of all INEL retrievably-stored TRU waste to be stored in WIPP will be required for the NMVP. Waste characterization requirements for PA and RCRA may not necessarily be identical. Waste characterization requirements for the PA will be defined by Sandia National Laboratories. The requirements for RCRA are defined in 40 CFR 268, WIPP RCRA Part B Application Waste Analysis Plan (WAP), and WIPP Waste Characterization Program Plan (WWCP). This Project Management Plan (PMP) addresses only the characterization of the contact handled (CH) TRU waste at the INEL. This document will address all work in which EG&G Idaho is responsible concerning the INEL WETP. Even though EG&G Idaho has no responsibility for the work that ANL-W is performing, EG&G Idaho will keep a current status and provide a project coordination effort with ANL-W to ensure that the INEL, as a whole, is effectively and efficiently completing the requirements for WETP.

Connolly, M.J.; Sayer, D.L.

1993-11-01T23:59:59.000Z

200

Approved Chemist Application 2012  

Science Conference Proceedings (OSTI)

APPROVED CHEMIST APPLICATION 1. Name of Applicant 2. Company 3. Address 4. Analyst Number (2011) 5. City 6. State 7. Postal Code

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

2010 Approved Chemist Form  

Science Conference Proceedings (OSTI)

APPROVED CHEMIST APPLICATION to the AOCS Examination Board 1. Name of Applicant 2. Company 3. Address 4. Analyst Number 5. City 6. State 7. P

202

2011 Approved Chemist Form  

Science Conference Proceedings (OSTI)

APPROVED CHEMIST APPLICATION to the AOCS Examination Board 1. Name of Applicant 2. Company 3. Address 4. Analyst Number 5. City 6. State 7. P

203

Cold test plan for the Old Hydrofracture Facility tank contents removal project, Oak Ridge National Laboratory, Oak Ridge, Tennessee  

SciTech Connect

This Old Hydrofracture Facility (OHF) Tanks Contents Removal Project Cold Test Plan describes the activities to be conducted during the cold test of the OHF sluicing and pumping system at the Tank Technology Cold Test Facility (TTCTF). The TTCTF is located at the Robotics and Process Systems Complex at the Oak Ridge National Laboratory (ORNL). The cold test will demonstrate performance of the pumping and sluicing system, fine-tune operating instructions, and train the personnel in the actual work to be performed. After completion of the cold test a Technical Memorandum will be prepared documenting completion of the cold test, and the equipment will be relocated to the OHF site.

1997-11-01T23:59:59.000Z

204

Laboratory galling tests of several commercial cobalt-free weld hardfacing alloys  

SciTech Connect

Since the mechanical properties of most wear materials are generally insufficient for structural applications, hardfacing alloys have been traditionally weld deposited to provide a wear resistance surface for a base material. An important attribute of a hardfacing alloy that is subjected to high load sliding contact is the resistance to adhesive (galling) damage. Although Co-base hardfacing alloys generally possess excellent galling wear resistance, there is interest in developing cobalt-free replacement hardfacings to reduce radiation exposure costs. A laboratory galling test has been developed for weld hardfacing deposits that is a modification of the standardized ASTM G98-91 galling test procedure. The procedure for testing a weld hardfacing deposit on a softer base metal using a button-on-block configuration is described. The contact stresses for the initiation of adhesive galling damage were measured to rank the galling resistance of several commercial Fe-base, Ni-base and Co-base hardfacing alloys. Although the galling resistance of the Fe-base alloys was generally superior to the Ni-base alloys, neither system approached the excellent galling resistance of the Co-base alloys. Microstructure examinations were used to understand the micro-mechanisms for the initiation and propagation of galling damage. A physical model for the initiation and propagation of adhesive wear is used to explain the lower galling resistance for the Ni-base hardfacings and to understand the influence of composition on the galling resistance of Ni-base alloys. The composition of some Ni base hardfacings was modified in a controlled manner to quantify the influence of specific elements on the galling resistance.

Cockeram, B.V.; Buck, R.F.; Wilson, W.L.

1997-04-01T23:59:59.000Z

205

Laboratory Testing of Bulk Vitrified Low-Activity Waste Forms to Support the 2005 Integrated Disposal Facility Performance Assessment  

Science Conference Proceedings (OSTI)

The purpose of this report is to document the results from laboratory testing of the bulk vitri-fied (BV) waste form that was conducted in support of the 2005 integrated disposal facility (IDF) performance assessment (PA). Laboratory testing provides a majority of the key input data re-quired to assess the long-term performance of the BV waste package with the STORM code. Test data from three principal methods, as described by McGrail et al. (2000a; 2003a), are dis-cussed in this testing report including the single-pass flow-through test (SPFT) and product con-sistency test (PCT). Each of these test methods focuses on different aspects of the glass corrosion process. See McGrail et al. (2000a; 2003a) for additional details regarding these test methods and their use in evaluating long-term glass performance. In addition to evaluating the long-term glass performance, this report discusses the results and methods used to provided a recommended best estimate of the soluble fraction of 99Tc that can be leached from the engineer-ing-scale BV waste package. These laboratory tests are part of a continuum of testing that is aimed at improving the performance of the BV waste package.

Pierce, Eric M.; McGrail, B. Peter; Bagaasen, Larry M.; Rodriguez, Elsa A.; Wellman, Dawn M.; Geiszler, Keith N.; Baum, Steven R.; Reed, Lunde R.; Crum, Jarrod V.; Schaef, Herbert T.

2006-06-30T23:59:59.000Z

206

Q&As about NIST Evaluation of Laboratories that Test Voting ...  

Science Conference Proceedings (OSTI)

... are contained in NIST Handbook 150-22 ... Laboratories that do not achieve accreditation within 12 ... Q. Does NVLAP conduct follow-up assessments? ...

2012-06-28T23:59:59.000Z

207

Argonne National Laboratory puts alternative-fuel vehicles to the test  

DOE Green Energy (OSTI)

This paper describes the participation in the alternative-fueled vehicles (AFV) program at Argonne National Laboratory. Argonne maintains a fleet of 300 vehicles, including AFV`s.

NONE

1997-07-01T23:59:59.000Z

208

Investigation of Conditions for Moisture Damage in Asphalt Concrete and Appropriate Laboratory Test Methods  

E-Print Network (OSTI)

Study of Moisture Damage Test Methods for Evaluatingart and Critical Review of Test Methods. NCAT Report No.Pavement Moisture-Damage Test. Transportation Research

Lu, Qing

2005-01-01T23:59:59.000Z

209

Investigation of Conditions for Moisture Damage in Asphalt Concrete and Appropriate Laboratory Test Methods  

E-Print Network (OSTI)

Pavement Moisture-Damage Test. Transportation Researchgreater than five years. 6. Test sections may be necessaryand Parker, F. (1998). Test for Plastic Fines in Aggregates

Harvey, John T; Lu, Qing

2005-01-01T23:59:59.000Z

210

Environmentally Acceptable Transformer Fluids: Phase I State-of-the-Art Review; Phase II Laboratory Testing of Fluids  

Science Conference Proceedings (OSTI)

The objectives of this investigation were to identify, obtain, and test environmentally acceptable dielectric fluids for power transformers. In addition, the report provides a resource guide to the environmental qualities and performances of conventional transformer oils and environmentally acceptable alternatives. A literature review was conducted to identify appropriate candidates and, once identified, samples of the oil were obtained and tested. The findings of the literature review and the laboratory...

2000-11-17T23:59:59.000Z

211

Improving Ventilation and Saving Energy: Laboratory Study in aModular Classroom Test Bed  

SciTech Connect

The primary goals of this research effort were to develop, evaluate, and demonstrate a practical HVAC system for classrooms that consistently provides classrooms with the quantity of ventilation in current minimum standards, while saving energy, and reducing HVAC-related noise levels. This research was motivated by several factors, including the public benefits of energy efficiency, evidence that many classrooms are under-ventilated, and public concerns about indoor environmental quality in classrooms. This project involved the installation and verification of the performance of an Improved Heat Pump Air Conditioning (IHPAC) system, and its comparison, a standard HVAC system having an efficiency of 10 SEER. The project included the verification of the physical characteristics suitable for direct replacement of existing 10 SEER systems, quantitative demonstration of improved energy efficiency, reduced acoustic noise levels, quantitative demonstration of improved ventilation control, and verification that the system would meet temperature control demands necessary for the thermal comfort of the occupants. Results showed that the IHPAC met these goals. The IHPAC was found to be a direct bolt-on replacement for the 10 SEER system. Calculated energy efficiency improvements based on many days of classroom cooling or heating showed that the IHPAC system is about 44% more efficient during cooling and 38% more efficient during heating than the 10 SEER system. Noise reduction was dramatic, with measured A-weighed sound level for fan only operation conditions of 34.3 dB(A), a reduction of 19 dB(A) compared to the 10 SEER system. Similarly, the IHPAC stage-1 and stage-2 compressor plus fan sound levels were 40.8 dB(A) and 42.7 dB(A), reductions of 14 and 13 dB(A), respectively. Thus, the IHPAC is 20 to 35 times quieter than the 10 SEER systems depending upon the operation mode. The IHPAC system met the ventilation requirements and was able to provide consistent outside air supply throughout the study. Indoor CO2 levels with simulated occupancy were maintained below 1000 ppm. Finally temperature settings were met and controlled accurately. The goals of the laboratory testing phase were met and this system is ready for further study in a field test of occupied classrooms.

Apte, Michael G.; Buchanan, Ian S.; Faulkner, David; Fisk,William J.; Lai, Chi-Ming; Spears, Michael; Sullivan, Douglas P.

2005-08-01T23:59:59.000Z

212

Medical Records for Animals Used in Research, Teaching, and Testing: Public Statement from the American College of Laboratory Animal Medicine  

E-Print Network (OSTI)

Medical Records for Animals Used in Research, Teaching, and Testing: Public Statement from the American College of Laboratory Animal Medicine ACLAM Medical Records Committee: Karl Field (Chair), Michele. Suckow Abstract Medical records are considered to be a key element of a program of adequate veterinary

Oliver, Douglas L.

213

Generalized Test Plan for the Vitrification of Simulated High-Level -Waste Calcine in the Idaho National Laboratorys Bench -Scale Cold Crucible Induction Melter  

SciTech Connect

This Preliminary Idaho National Laboratory (INL) Test Plan outlines the chronological steps required to initially evaluate the validity of vitrifying INL surrogate (cold) High-Level-Waste (HLW) solid particulate calcine in INL's Cold Crucible Induction Melter (CCIM). Its documentation and publication satisfies interim milestone WP-413-INL-01 of the DOE-EM (via the Office of River Protection) sponsored work package, WP 4.1.3, entitled 'Improved Vitrification' The primary goal of the proposed CCIM testing is to initiate efforts to identify an efficient and effective back-up and risk adverse technology for treating the actual HLW calcine stored at the INL. The calcine's treatment must be completed by 2035 as dictated by a State of Idaho Consent Order. A final report on this surrogate/calcine test in the CCIM will be issued in May 2012-pending next fiscal year funding In particular the plan provides; (1) distinct test objectives, (2) a description of the purpose and scope of planned university contracted pre-screening tests required to optimize the CCIM glass/surrogate calcine formulation, (3) a listing of necessary CCIM equipment modifications and corresponding work control document changes necessary to feed a solid particulate to the CCIM, (4) a description of the class of calcine that will be represented by the surrogate, and (5) a tentative tabulation of the anticipated CCIM testing conditions, testing parameters, sampling requirements and analytical tests. Key FY -11 milestones associated with this CCIM testing effort are also provided. The CCIM test run is scheduled to be conducted in February of 2012 and will involve testing with a surrogate HLW calcine representative of only 13% of the 4,000 m3 of 'hot' calcine residing in 6 INL Bin Sets. The remaining classes of calcine will have to be eventually tested in the CCIM if an operational scale CCIM is to be a feasible option for the actual INL HLW calcine. This remaining calcine's make-up is HLW containing relatively high concentrations of zirconium and aluminum, representative of the cladding material of the reprocessed fuel that generated the calcine. A separate study to define the CCIM testing needs of these other calcine classifications in currently being prepared under a separate work package (WP-0) and will be provided as a milestone report at the end of this fiscal year.

Vince Maio

2011-08-01T23:59:59.000Z

214

Terahop and Lawrence Livermore National LaboratoryStructural Fire RF Testing  

SciTech Connect

The Georgia Public Safety Training Center's Live Fire Training Facility in Forsyth, GA is a three story structure constructed of rebar-reinforced concrete wall and floors. All the door and window coverings on the building are constructed of thick, plate metal to withstand the high temperatures generated inside the building during training exercises. All of the building's walls and floors are 1-foot thick, and regular concrete columns run up along the inside of the wall increasing the thickness to 20-inches in those locations. A center concrete staircase divides the structure in half. For typical exercises, fires are started in the back right corner of the building on the first floor and in the front right corner on the second floor as shown in Figure 2. Due to the high heat generated during these exercises, measured at 300 F on the floor and 700 F near the ceilings, there were limited locations at which equipment could be placed that did not incorporate heat shielding, such as the Lawrence Livermore National Laboratory's UWB system. However, upon inspection of the building, two preferable locations were identified in which equipment could be placed that would be protected from the temperature extremes generated by the fires. These locations are identified in Figure 2 as the tested TX locations. These were preferred locations because, while they protected the hardware from temperature extremes, they also force the RF transmission path through the building to cross very near the fire locations and anticipated plasma generation regions. Both of the locations listed in Figure 2 were tested by the UWB equipment and found to be suitable deployment locations to establish a solid RF link for data collection. The transmission location on the first floor was ultimately chosen for use during the actual exercises because it was accessible to the data collection team during the exercises. This allowed them to remove the hardware once the testing was complete without having to wait for the entire day of exercises to complete. Unfortunately, RF transmission directly through the central location of the fire on the first floor was not possible, so the transmission path had to be shifted approximately 6-feet off the side of the fire's center. The corner where the fire was located on the first floor was re-enforced with a mixture of concrete and metal fibers for heat resistance. This material was highly reflective, permitting very little RF energy to pass through it. This phenomenon was also observed and verified by Terahop's testing, discussed in the next section. An image of these re-enforced walls and a close up of the actual wall material containing the metal fibers can bee seen in Figure 3.

Haugen, P; Pratt, G

2007-02-26T23:59:59.000Z

215

Environmental Approvals (Manitoba, Canada)  

Energy.gov (U.S. Department of Energy (DOE))

The Environmental Approvals Branch ensures that developments are regulated in a manner that protects the environment and public health, and sustains a high quality of life for present and future...

216

Development of a Fan-Filter Unit Test Standard, Laboratory Validations, and its Applications across Industries  

E-Print Network (OSTI)

Energy Performance of Fan-Filter Units, Version 1.3 (2005).Energy Performance of Fan-Filter Units, Version 2.0 (2006).Laboratory Evaluation of Fan-filter Units Aerodynamic and

Xu, Tengfang

2008-01-01T23:59:59.000Z

217

Superconducting magnet development capability of the LLNL (Lawrence Livermore National Laboratory) High Field Test Facility  

SciTech Connect

This paper discusses the following topics: High-Field Test Facility Equipment at LLNL; FENIX Magnet Facility; High-Field Test Facility (HFTF) 2-m Solenoid; Cryogenic Mechanical Test Facility; Electro-Mechanical Conductor Test Apparatus; Electro-Mechanical Wire Test Apparatus; FENIX/HFTF Data System and Network Topology; Helium Gas Management System (HGMS); Airco Helium Liquefier/Refrigerator; CTI 2800 Helium Liquefier; and MFTF-B/ITER Magnet Test Facility.

Miller, J.R.; Shen, S.; Summers, L.T.

1990-02-01T23:59:59.000Z

218

Chemical analyses of soil samples collected from the Sandia National Laboratories/NM, Tonopah Test Range environs, 1994-2005.  

Science Conference Proceedings (OSTI)

From 1994 through 2005, the Environmental Management Department of Sandia National Laboratories (SNL) at the Tonopah Test Range (TTR), NV, has collected soil samples at numerous locations on-site, on the perimeter, and off-site for the purpose of determining potential impacts to the environs from operations at TTR. These samples were submitted to an analytical laboratory of metal-in-soil analyses. Intercomparisons of these results were then made to determine if there was any statistical difference between on-site, perimeter, and off-site samples, or if there were increasing or decreasing trends which indicated that further investigation may be warranted. This work provided the SNL Environmental Management Department with a sound baseline data reference against which to compare future operational impacts. In addition, it demonstrates the commitment that the Laboratories have to go beyond mere compliance to achieve excellence in its operations. This data is presented in graphical format with narrative commentaries on particular items of interest.

Deola, Regina Anne; Oldewage, Hans D.; Herrera, Heidi M.; Miller, Mark Laverne

2006-05-01T23:59:59.000Z

219

ISA Approves Standard for Wireless Automation in Process Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. ISA Approves Standard for Wireless Automation in Process Control Applications More Documents & Publications DOE/OE National SCADA Test Bed Fiscal Year 2009 Work Plan Wireless System Considerations When Implementing NERC Critical Infrastructure Protection Standards Control Systems Security Standards: Accomplishments And Impacts

220

Initial Laboratory-Scale Melter Test Results for Combined Fission Product Waste  

Science Conference Proceedings (OSTI)

This report describes the methods and results used to vitrify a baseline glass, CSLNTM-C-2.5 in support of the AFCI (Advanced Fuel Cycle Initiative) using a Quartz Crucible Scale Melter at the Pacific Northwest National Laboratory. Document number AFCI-WAST-PMO-MI-DV-2009-000184.

Riley, Brian J.; Crum, Jarrod V.; Buchmiller, William C.; Rieck, Bennett T.; Schweiger, Michael J.; Vienna, John D.

2009-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

User_ApproveTrainingRequest  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Approving User Training Requests Approving User Training Requests © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Approving User Training Requests Purpose The purpose of this job aid is to guide users through the step-by-step process of approving a user training request. Task A. Approve a User Training Request From the Home Page, click the You have pending approval requests link in the Alerts box. The Pending Reviews and Approvals page displays and defaults open to the pending approval. Click the expand icon ( ) next to the user's name and/or click the Title link for additional information on the request. Select the Enter Reasons for Approvals or Denials checkbox to allow for comments. Select the Approve radio

222

Investigation of Conditions for Moisture Damage in Asphalt Concrete and Appropriate Laboratory Test Methods  

E-Print Network (OSTI)

Administration. 75. Tandon, V. , Vemuri, N. , Nazarian, S. ,modulus test was poor (Tandon et al. 1997). The ECS was nothave been achieved yet (Tandon et al. 2004). The HWTD test

Harvey, John T; Lu, Qing

2005-01-01T23:59:59.000Z

223

Investigation of Conditions for Moisture Damage in Asphalt Concrete and Appropriate Laboratory Test Methods  

E-Print Network (OSTI)

Highway Administration. Tandon, V. , Vemuri, N. , Nazarian,modulus test was poor (Tandon et al. 1997). The ECS was nothave been achieved yet (Tandon et al. 2004). The HWTD test

Lu, Qing

2005-01-01T23:59:59.000Z

224

Investigation of the fire performance of building insulation in full-scale and laboratory fire tests  

SciTech Connect

Twenty-two insulations are exposed to fire tests including the 25 ft Tunnel test, the Attic Floor Radiant Panel test and actual fire conditions of a simulated attic configuration. The insulations consisted of a number of cellulose fiber insulations, utilizing various chemical treatments, glass fiber and mineral fiber insulations. The fire performance characteristics of the insulations were measured in each of the three test scenarios and the report compares their results.

Kleinfelder, W.A.

1984-04-01T23:59:59.000Z

225

Approved DOE Technical Standards  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

approved-doe-technical-standards Forrestal Building approved-doe-technical-standards Forrestal Building 1000 Independence Avenue, SW Washington, DC 205851.800.dial.DOE en DOE-STD-1150-2013 http://energy.gov/hss/downloads/doe-std-1150-2013 DOE-STD-1150-2013

226

Steam Generator Management Program: Laboratory Testing to Validate pH and Conductivity MULTEQ Calculations, Revision 1  

Science Conference Proceedings (OSTI)

Measures to control corrosion processes in steam generators have for the most part proven successful to date, but intergranular attack/stress corrosion cracking (IGA/SCC) of Alloy 600 continues to occur in steam generators at some nuclear plants. The present mitigation strategy is based on the premise that crack initiation and propagation rates depend on pH and electrochemical potential. There is some evidence suggesting that lead (Pb) may play a key role. This report documents laboratory testing to vali...

2011-11-28T23:59:59.000Z

227

Repair and Strengthening by Use of Superficial Fixed Laminates of Cracked Masonry Walls Sheared Horizontally-Laboratory Tests  

Science Conference Proceedings (OSTI)

There are many methods of crack repairing in masonry structures. One of them is repair and strengthening by using of superficial fixed laminates, especially in case of masonry walls with plastering on their both sides. The initial laboratory tests of three different types of strengthening of diagonal cracked masonry wallettes are presented. Tests concerned three clay brick masonry walls subjected to horizontal shearing with two levels of precompression and strengthened by flexible polymer injection, superficial glass fixed by polymer fibre laminate plates and using of CRFP strips stiff fixed to the wall surface by polymer and stiff resin epoxy fixing are presented and discussed.

Kubica, Jan [Department of Structural Engineering, Silesian University of Technology, Akademicka 5, PL-44-100 Gliwice (Poland); Kwiecien, Arkadiusz; Zajac, Boguslaw [Department of Civil Engineering, Cracow University of Technology, Warszawska 24, PL-31-155 Krakow (Poland)

2008-07-08T23:59:59.000Z

228

Large-Scale Testing and High-Fidelity Simulation Capabilities at Sandia National Laboratories to Support Space Power and Propulsion  

SciTech Connect

Sandia National Laboratories, as a Department of Energy, National Nuclear Security Agency, has major responsibility to ensure the safety and security needs of nuclear weapons. As such, with an experienced research staff, Sandia maintains a spectrum of modeling and simulation capabilities integrated with experimental and large-scale test capabilities. This expertise and these capabilities offer considerable resources for addressing issues of interest to the space power and propulsion communities. This paper presents Sandia's capability to perform thermal qualification (analysis, test, modeling and simulation) using a representative weapon system as an example demonstrating the potential to support NASA's Lunar Reactor System.

Dobranich, Dean [Thermal and Reactive Processes Department, Sandia National Laboratories Albuquerque, NM 87185 (United States); Blanchat, Thomas K. [Fire Science and Technology Department, Sandia National Laboratories Albuquerque, NM 87185 (United States)

2008-01-21T23:59:59.000Z

229

Improving Building Energy Simulation Programs Through Diagnostic Testing (Fact Sheet), NREL Highlights, Research & Development, NREL (National Renewable Energy Laboratory)  

NLE Websites -- All DOE Office Websites (Extended Search)

test procedure evaluates quality and accuracy of energy test procedure evaluates quality and accuracy of energy analysis tools for the residential building retrofit market. Reducing the energy use of existing homes in the United States offers significant energy-saving opportunities, which can be identified through building simulation software tools that calculate optimal packages of efficiency measures. To improve the accuracy of energy analysis for residential buildings, the National Renewable Energy Laboratory's (NREL) Buildings Research team developed the Building Energy Simulation Test for Existing Homes (BESTEST-EX), a method for diagnosing and correcting errors in building energy audit software and calibration procedures. BESTEST-EX consists of building physics and utility bill calibration test cases, which soft-

230

Usability evaluation for mobile device: a comparison of laboratory and field tests  

Science Conference Proceedings (OSTI)

Usability testing of mobile devices is an emerging area of research in the field of Human-Computer Interaction. Guidelines had been established as to how usability tests should be conducted. However, there are limitations to the effectiveness of conventional ... Keywords: dynamics environment, mobile devices, usability

Henry Been-Lirn Duh; Gerald C. B. Tan; Vivian Hsueh-hua Chen

2006-09-01T23:59:59.000Z

231

DEMONSTRATION SOLIDIFICATION TESTS CONDUCTED ON RADIOACTIVELY CONTAMINATED ORGANIC LIQUIDS AT THE AECL WHITESHELL LABORATORIES  

Science Conference Proceedings (OSTI)

The AECL, Whiteshell Laboratory (WL) near Pinawa Manitoba, Canada, was established in the early 1960's to carry out AECL research and development activities for higher temperature versions of the CANDU{reg_sign} reactor. The initial focus of the research program was the Whiteshell Reactor-1 (WR-1) Organic Cooled Reactor (OCR) that began operation in 1965. The OCR program was discontinued in the early 1970's in favor of the successful heavy-water-cooled CANDU system. WR-1 continued to operate until 1985 in support of AECL nuclear research programs. A consequence of the Federal government's recent program review process was AECL's business decision to discontinue research programs and operations at the Whiteshell Laboratories and to consolidate its' activities at the Chalk River Laboratories. As a result, AECL received government concurrence in 1998 to proceed to plan actions to achieve closure of WL. The planning actions now in progress address the need to safely and effectively transition the WL site from an operational state, in support of AECL's business, to a shutdown and decommissioned state that meets the regulatory requirements for a licensed nuclear site. The decommissioning program that will be required at WL is unique within AECL and Canada since it will need to address the entire research site rather than individual facilities declared redundant. Accordingly, the site nuclear facilities are being systematically placed in a safe shutdown state and planning for the decommissioning work to place the facilities in a secure monitoring and surveillance state is in progress. One aspect of the shutdown activities is to deal with the legacy of radioactively contaminated organic liquid wastes. Use of a polymer powder to solidify these organic wastes was identified as one possibility for improved interim storage of this material pending final disposition.

Ryz, R. A.; Brunkow, W. G.; Govers, R.; Campbell, D.; Krause, D.

2002-02-25T23:59:59.000Z

232

L:\\Instructions & Informational Documents\\I106 Available Proficiency Testing ProgramsAmerican Association for Laboratory Accreditation  

E-Print Network (OSTI)

This list is by no means comprehensive, but merely includes contact information for proficiency testing programs of which A2LA is aware. This list is divided into those programs that are currently A2LA-accredited and those that are not A2LA-accredited. For those programs that are accredited by A2LA, please refer to their detailed Scope of Accreditation, located on the A2LA Website. We also encourage you to check the websites of our Mutual Recognition Agreement Partners for PT Providers accredited by them. A2LA recommends that, whenever possible, A2LA-accredited testing and calibration laboratories use accredited PT Providers to meet the A2LA requirements for participation in proficiency testing. However, we recognize that accredited PT Providers may not be available for all technical disciplines, or that specific accreditation programs may mandate participation in other comparisons. Therefore, if there are no accredited alternatives available and if the samples offered by the non-accredited programs below are relevant to the work your laboratory performs, we recommend that you contact them to discuss enrollment options. Participation in the programs noted with * * is required by specific A2LA programs of accreditation. A2LA ACCREDITED PROFICIENCY TESTING PROGRAMS (Please refer to Scopes of Accreditation on A2LA website for more details.)

Steve Arpie; Arlene Fox

2011-01-01T23:59:59.000Z

233

Heap leach studies on the removal of uranium from soil. Report of laboratory-scale test results  

SciTech Connect

This report details the initial results of laboratory-scale testing of heap leach that is being developed as a method for removing uranium from uranium-contaminated soil. The soil used was obtained from the site of the Feed Materials Production Center (FMPC) near the village of Fernald in Ohio. The testing is being conducted on a laboratory scale, but it is intended that this methodology will eventually be enlarged to field scale where, millions of cubic meters of uranium-contaminated soil can be remediated. The laboratory scale experiments show that, using carbonate/bicarbonate solutions, uranium can be effectively removed from the soil from initial values of around 600 ppM down to 100 ppM or less. The goal of this research is to selectively remove uranium from the contaminated soil, without causing serious changes in the characteristics of the soil. It is also hoped that the new technologies developed for soil remediation at FEMP will be transferred to other sites that also have uranium-contaminated soil.

Turney, W.R.J.R.; York, D.A.; Mason, C.F.V.; Chisholm-Brause, C.J.; Dander, D.C.; Longmire, P.A.; Morris, D.E.; Strait, R.K.; Brewer, J.S.

1994-05-01T23:59:59.000Z

234

Testing Small Wind Turbines at the National Renewable Energy Laboratory (NREL) (Poster)  

DOE Green Energy (OSTI)

WindPower 2008 conference sponsored by AWEA held in Houston, Texas on June 1-4, 2008. This poster describes four small wind electric systems that were tested to IEC and AWEA standards at NREL's NWTC.

Sinclair, K.; Bowen, A.

2008-06-01T23:59:59.000Z

235

Testing Small Wind Turbines at the National Renewable Energy Laboratory (NREL) (Poster)  

SciTech Connect

WindPower 2008 conference sponsored by AWEA held in Houston, Texas on June 1-4, 2008. This poster describes four small wind electric systems that were tested to IEC and AWEA standards at NREL's NWTC.

Sinclair, K.; Bowen, A.

2008-06-01T23:59:59.000Z

236

Maximizing Thermal Efficiency and Optimizing Energy Management (Fact Sheet), Thermal Test Facility (TTF), NREL (National Renewable Energy Laboratory)  

NLE Websites -- All DOE Office Websites (Extended Search)

Maximizing Thermal Efficiency and Maximizing Thermal Efficiency and Optimizing Energy Management Scientists at this living laboratory develop optimal solutions for managing energy flows within buildings and transportation systems. The built environment is stressing the utility grid to a greater degree than ever before. Growing demand for electric vehicles, space conditioning, and plug loads presents a critical opportunity for more effective energy management and development of efficiency technologies. Researchers at the Thermal Test Facility (TTF) on the campus of the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) in Golden, Colorado, are addressing this opportunity. Through analysis of efficient heating, ventilating, and air conditioning (HVAC) strategies, automated home energy management (AHEM), and energy storage systems,

237

Reviewed and Approved By  

E-Print Network (OSTI)

We wish to acknowledge the participation and assistance of the dry cleaning industry and allied trade representatives, district and State agency staff, and others. We thank the many dry cleaners who have taken the time to show us their operations, participate in meetings, and respond to our requests for information. We wish to express a special appreciation to the dry cleaners who reviewed this document and provided constructive comments. Disclaimer This curriculum has been reviewed by the staff of the California Air Resources Board and approved for publication. Approval does not signify that the contents necessarily reflect the views and polices of the Air Resources Board, nor does mention of trade names or commercial products constitute endorsement or recommendation for use. [Blank Page] TABLE OF CONTENTS Chapter Page Information for Instructors

Tina Najjar; Mark Williams; Richard Boyd; Victor Douglas; Kelly Hughes; Todd S. Wong

1996-01-01T23:59:59.000Z

238

PREDICTION OF DISSOLVER LIFETIMES THROUGH NON-DESTRUCTIVE EVALUATION AND LABORATORY TESTING  

Science Conference Proceedings (OSTI)

Non-destructive evaluation was used as the primary method of monitoring the corrosion degradation of nuclear material dissolvers and assessing the remaining lifetimes. Materials were typically processed in nitric acid based (4-14M) solutions containing fluoride concentrations less than 0.2 M. The primary corrosion issue for the stainless steel dissolvers is the occurrence of localized corrosion near the tank bottom and the heat affected zones of the welds. Laboratory data for a range of operational conditions, including solution chemistry and temperature, was used to assess the impact of processing changes on the dissolver corrosion rate. Experimental and NDE-based general corrosion rates were found to be in reasonable agreement for standard dissolution chemistries consisting of nitric acid with fluorides and at temperatures less than 95 C. Greater differences were observed when chloride was present as an impurity and temperatures exceeded 100 C.

Mickalonis, J.; Woodsmall, T.; Hinz, W.; Edwards, T.

2011-10-03T23:59:59.000Z

239

Drilling operations at the Nevada Test Site  

SciTech Connect

The Nevada Operations Office (NV) is responsible for supporting the nuclear test programs of the Los Alamos and Lawrence Livermore National Laboratories. This support includes the drilling of test holes for nuclear device testing a the Nevada Test Site (NTS). The purpose of this audit was to assess the effectiveness of the Department of Energy's management of test hole inventories at the NTS. Our audit disclosed that NV accumulated a large inventory of unused test holes and approved drilling additional holes for which neither laboratory (Los Alamos nor Livermore) had identified a need. The overdrilling of test holes occurred because NV did not comply with good inventory practices that would have had NV's approving official question the need for, and the timing of, the laboratories' drilling requests. Instead, NV gave perfunctory approval to the laboratories' work orders for drilling test holes, and emphasized keeping two drill rig crews busy and satisfying the laboratories' demands for dedicated drilling personnel. Although NV did not agree that overdrilling had occurred, it has cut back its drilling activities and estimated that this will save abut $7.6 million annually. NV agreed with the recommendations in the report and has taken corrective actions.

1990-05-29T23:59:59.000Z

240

EU approves food labeling rules  

Science Conference Proceedings (OSTI)

New food-labeling regulations are in place in the European Union after the European Parliament (EP) approved rules aimed at helping consumers make better informed, healthier [sic] choices. EU approves food labeling rules Inform Magazine Inform Archives

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Analytical laboratory quality audits  

SciTech Connect

Analytical Laboratory Quality Audits are designed to improve laboratory performance. The success of the audit, as for many activities, is based on adequate preparation, precise performance, well documented and insightful reporting, and productive follow-up. Adequate preparation starts with definition of the purpose, scope, and authority for the audit and the primary standards against which the laboratory quality program will be tested. The scope and technical processes involved lead to determining the needed audit team resources. Contact is made with the auditee and a formal audit plan is developed, approved and sent to the auditee laboratory management. Review of the auditee's quality manual, key procedures and historical information during preparation leads to better checklist development and more efficient and effective use of the limited time for data gathering during the audit itself. The audit begins with the opening meeting that sets the stage for the interactions between the audit team and the laboratory staff. Arrangements are worked out for the necessary interviews and examination of processes and records. The information developed during the audit is recorded on the checklists. Laboratory management is kept informed of issues during the audit so there are no surprises at the closing meeting. The audit report documents whether the management control systems are effective. In addition to findings of nonconformance, positive reinforcement of exemplary practices provides balance and fairness. Audit closure begins with receipt and evaluation of proposed corrective actions from the nonconformances identified in the audit report. After corrective actions are accepted, their implementation is verified. Upon closure of the corrective actions, the audit is officially closed.

Kelley, William D.

2001-06-11T23:59:59.000Z

242

Building Energy Simulation Test for Existing Homes (BESTEST-EX) (Presentation), NREL (National Renewable Energy Laboratory)  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Energy Simulation Test Building Energy Simulation Test for Existing Homes (BESTEST-EX) Ron Judkoff Joel Neymark Ben Polly Updated: December 2011 NREL/PR-5500-53701 2 Goals of NREL Analysis Accuracy R&D * Provide industry with the tools and technical information needed to improve the accuracy and consistency of analysis methods * Reduce the risks associated with purchasing, financing, and selling energy efficiency upgrades * Enhance software and input collection methods considering impacts on accuracy, cost, and time of energy assessments 3 BESTEST-EX Goals * Test software predictions of retrofit energy savings in existing homes * Ensure building physics calculations and utility bill calibration procedures perform up to a minimum standard

243

Determination of soil liquefaction characteristics by large-scale laboratory tests. [Sand  

SciTech Connect

The testing program described in this report was carried out to study the liquefaction behavior of a clean, uniform, medium sand. Horizontal beds of this sand, 42 inches by 90 inches by 4 inches were prepared by pluviation with a special sand spreader, saturated, and tested in a shaking table system designed for this program, which applied a horizontal cyclic shear stress to the specimens. Specimen size was selected to reduce boundary effects as much as possible. Values of pore pressures and shear strains developed during the tests are presented for sand specimens at relative densities of 54, 68, 82, and 90 percent, and the results interpreted to determine the values of the stress ratio causing liquefaction at the various relative densities.

1975-05-01T23:59:59.000Z

244

ALUMINUM REMOVAL FROM HANFORD WASTE BY LITHIUM HYDROTALCITE PRECIPITATION - LABORATORY SCALE VALIDATION ON WASTE SIMULANTS TEST REPORT  

SciTech Connect

To reduce the additional sodium hydroxide and ease processing of aluminum bearing sludge, the lithium hydrotalcite (LiHT) process has been invented by AREV A and demonstrated on a laboratory scale to remove alumina and regenerate/recycle sodium hydroxide prior to processing in the WTP. The method uses lithium hydroxide (LiOH) to precipitate sodium aluminate (NaAI(OH){sub 4}) as lithium hydrotalcite (Li{sub 2}CO{sub 3}.4Al(OH){sub 3}.3H{sub 2}O) while generating sodium hydroxide (NaOH). In addition, phosphate substitutes in the reaction to a high degree, also as a filterable solid. The sodium hydroxide enriched leachate is depleted in aluminum and phosphate, and is recycled to double-shell tanks (DSTs) to leach aluminum bearing sludges. This method eliminates importing sodium hydroxide to leach alumina sludge and eliminates a large fraction of the total sludge mass to be treated by the WTP. Plugging of process equipment is reduced by removal of both aluminum and phosphate in the tank wastes. Laboratory tests were conducted to verify the efficacy of the process and confirm the results of previous tests. These tests used both single-shell tank (SST) and DST simulants.

SAMS T; HAGERTY K

2011-01-27T23:59:59.000Z

245

Preliminary Feasibility, Design, and Hazard Analysis of a Boiling Water Test Loop Within the Idaho National Laboratory Advanced Test Reactor National Scientific User Facility  

Science Conference Proceedings (OSTI)

The Advanced Test Reactor (ATR) is a pressurized light-water reactor with a design thermal power of 250 MW. The principal function of the ATR is to provide a high neutron flux for testing reactor fuels and other materials. The ATR and its support facilities are located at the Idaho National Laboratory (INL). A Boiling Water Test Loop (BWTL) is being designed for one of the irradiation test positions within the. The objective of the new loop will be to simulate boiling water reactor (BWR) conditions to support clad corrosion and related reactor material testing. Further it will accommodate power ramping tests of candidate high burn-up fuels and fuel pins/rods for the commercial BWR utilities. The BWTL will be much like the pressurized water loops already in service in 5 of the 9 flux traps (region of enhanced neutron flux) in the ATR. The loop coolant will be isolated from the primary coolant system so that the loops temperature, pressure, flow rate, and water chemistry can be independently controlled. This paper presents the proposed general design of the in-core and auxiliary BWTL systems; the preliminary results of the neutronics and thermal hydraulics analyses; and the preliminary hazard analysis for safe normal and transient BWTL and ATR operation.

Douglas M. Gerstner

2009-05-01T23:59:59.000Z

246

Laboratory Test Report for Fujitsu 12RLS and Mitsubishi FE12NA Mini-Split Heat Pumps  

Science Conference Proceedings (OSTI)

Mini-split heat pumps are being proposed as a new retrofit option to replace resistance heating in the Pacific Northwest. NREL has previously developed a field test protocol for mini-split systems to ensure consistent results from field tests. This report focuses on the development of detailed system performance maps for mini-split heat pumps so that the potential benefits of mini-split systems can be accurately analyzed for different climate regions and housing types. This report presents laboratory test results for two mini-split heat pumps. Steady-state heating and cooling performance for the Fujitsu 12RLS and Mitsubishi FE12NA was tested under a wide range of outdoor and indoor temperatures at various compressor and fan speeds. Cycling performance for each unit was also tested under both modes of operation. Both systems performed quite well under low loads and the experimental test data aligned with manufacturer reported values. Adequate datasets were attained to promote performance modeling of these two systems in the future.

Winkler, J.

2011-09-01T23:59:59.000Z

247

Evaluation of Cavity Collapse and Surface Crater Formation for Selected Lawrence Livermore National Laboratory Underground Nuclear Tests - 2010  

SciTech Connect

This report evaluates collapse evolution for selected Lawrence Livermore National Laboratory (LLNL) underground nuclear tests at the Nevada National Security Site (NNSS, formerly called the Nevada Test Site). The work is being done at the request of Navarro-Interra LLC, and supports environmental restoration efforts by the Department of Energy, National Nuclear Security Administration for the Nevada Site Office. Safety decisions must be made before a surface crater area, or potential surface crater area, can be reentered for any work. Our statements on cavity collapse and surface crater formation are input into their safety decisions. These statements do not include the effects of erosion that may modify the surface collapse craters over time. They also do not address possible radiation dangers that may be present. Subject matter experts from the LLNL Containment Program who had been active in weapons testing activities performed these evaluations. Information used included drilling and hole construction, emplacement and stemming, timing and sequence of the selected test and nearby tests, geology, yield, depth of burial, collapse times, surface crater sizes, cavity and crater volume estimations, and ground motion. Both classified and unclassified data were reviewed. Various amounts of information are available for these tests, depending on their age and other associated activities. Lack of data can hamper evaluations and introduce uncertainty. We make no attempt to quantify this uncertainty.

Pawloski, G A

2011-01-03T23:59:59.000Z

248

Laboratory testing and modeling to evaluate perfluorocarbon compounds as tracers in geothermal systems  

Science Conference Proceedings (OSTI)

The thermal stability and adsorption characteristics of three perfluorinated hydrocarbon compounds were evaluated under geothermal conditions to determine the potential to use these compounds as conservative or thermally-degrading tracers in Engineered (or Enhanced) Geothermal Systems (EGS). The three compounds tested were perfluorodimethyl-cyclobutane (PDCB), perfluoromethylcyclohexane (PMCH), and perfluorotrimethylcyclohexane (PTCH), which are collectively referred to as perfluorinated tracers, or PFTs. Two sets of duplicate tests were conducted in batch mode in gold-bag reactors, with one pair of reactors charged with a synthetic geothermal brine containing the PFTs and a second pair was charged with the brine-PFT mixture plus a mineral assemblage chosen to be representative of activated fractures in an EGS reservoir. A fifth reactor was charged with deionized water containing the three PFTs. The experiments were conducted at {approx}100 bar, with temperatures ranging from 230 C to 300 C. Semi-analytical and numerical modeling was also conducted to show how the PFTs could be used in conjunction with other tracers to interrogate surface area to volume ratios and temperature profiles in EGS reservoirs. Both single-well and cross-hole tracer tests are simulated to illustrate how different suites of tracers could be used to accomplish these objectives. The single-well tests are especially attractive for EGS applications because they allow the effectiveness of a stimulation to be evaluated without drilling a second well.

Reimus, Paul W [Los Alamos National Laboratory

2011-01-21T23:59:59.000Z

249

Evaluation of Cavity Collapse and Surface Crater Formation for Selected Lawrence Livermore National Laboratory Underground Nuclear Tests - 2011, Part 2  

SciTech Connect

This report evaluates collapse evolution for selected Lawrence Livermore National Laboratory (LLNL) underground nuclear tests at the Nevada National Security Site (NNSS, formerly called the Nevada Test Site). The work is being done to support several different programs that desire access to the ground surface above expended underground nuclear tests. The programs include: the Borehole Management Program, the Environmental Restoration Program, and the National Center for Nuclear Security Gas-Migration Experiment. Safety decisions must be made before a crater area, or potential crater area, can be reentered for any work. Evaluation of cavity collapse and crater formation is input into the safety decisions. Subject matter experts from the LLNL Containment Program who participated in weapons testing activities perform these evaluations. Information used included drilling and hole construction, emplacement and stemming, timing and sequence of the selected test and nearby tests, geology, yield, depth of burial, collapse times, surface crater sizes, cavity and crater volume estimations, ground motion, and radiological release information. Both classified and unclassified data were reviewed. The evaluations do not include the effects of erosion that may modify the collapse craters over time. They also do not address possible radiation dangers that may be present. Various amounts of information are available for these tests, depending on their age and other associated activities. Lack of data can hamper evaluations and introduce uncertainty. We make no attempt to quantify this uncertainty. Evaluation of Cavity Collapse and Surface Crater Formation for Selected Lawrence Livermore National Laboratory Underground Nuclear Tests - 2011 was published on March 2, 2011. This report, considered Part 2 of work undertaken in calendar year 2011, compiles evaluations requested after the March report. The following unclassified summary statements describe collapse evolution and crater stability in response to a recent request to review 6 LLNL test locations in Yucca Flat, Rainier Mesa, and Pahute Mesa. They include: Baneberry in U8d; Clearwater in U12q; Wineskin in U12r, Buteo in U20a and Duryea in nearby U20a1; and Barnwell in U20az.

Pawloski, G A

2012-01-30T23:59:59.000Z

250

10-MWe solar-thermal central-receiver pilot plant, solar-facilities design integration: system integration laboratory test plan (RADL item 6-4)  

DOE Green Energy (OSTI)

A general demonstration test plan is provided for the activities to be accomplished at the Systems Integration Laboratory. The Master Control System, Subsystem Distributed Process Control, Representative Signal Conditioning Units, and Redline Units from the Receiver Subsystem and the Thermal Storage Subsystem and other external interface operational functions will be integrated and functionally demonstrated. The Beckman Multivariable Control Unit will be tested for frequency response, static checks, configuration changes, switching transients, and input-output interfaces. Maximum System Integration Laboratory testing will demonstrate the operational readiness of Pilot Plant controls and external interfaces that are available. Minimum System Integration Laboratory testing will be accomplished with reduced set of hardware, which will provide capability for continued development and demonstration of Operational Control System plant control application software. Beam Control System Integration Laboratory testing will demonstrate the operational readiness of the Beam Control System equipment and software. (LEW)

Not Available

1980-10-01T23:59:59.000Z

251

Enhancements in Glovebox Design Resulting from Laboratory-Conducted FIre Tests  

SciTech Connect

The primary mission of the Pit Disassembly and Conversion Facility (PDCF) Project was to disassemble nuclear weapons pits and convert the resulting special nuclear materials to a form suitable for further disposition. Because of the nature of materials involved, the fundamental system which allowed PDCF to perform its mission was a series of integrated and interconnected gloveboxes which provided confinement and containment of the radioactive materials being processed. The high throughput planned for PDCF and the relatively high neutron and gamma radiation levels of the pits required that gloveboxes be shielded to meet worker dose limits. The glovebox shielding material was required to contain high hydrogen concentrations which typically result in these materials being combustible. High combustible loadings created design challenges for the facility fire suppression and ventilation system design. Combustible loading estimates for the PDCF Plutonium (Pu) Processing Building increased significantly due to these shielding requirements. As a result, the estimates of combustible loading substantially exceeded values used to support fire and facility safety analyses. To ensure a valid basis for combustible loading contributed by the glovebox system, the PDCF Project funded a series of fire tests conducted by the Southwest Research Institute on door panels and a representative glovebox containing Water Extended Polyester (WEP) radiological shielding to observe their behavior during a fire event. Improvements to PDCF glovebox designs were implemented based on lessons learned during the fire test. In particular, methods were developed to provide high levels of neutron shielding while maintaining combustible loading in the glovebox shells at low levels. Additionally, the fire test results led to design modifications to mitigate pressure increases observed during the fire test in order to maintain the integrity of the WEP cladding. These changes resulted in significantly reducing the credited combustible loading of the facility. These advances in glovebox design should be considered for application in nuclear facilities within the Department of Energy complex in the future.

Brooks, Kriston P.; Wunderlich, Gregory M.; Mcentire, James R.; Richmond, William G.

2013-06-14T23:59:59.000Z

252

NREL Tests Dehumidifiers, Defines Simplified Simulation Model (Fact Sheet), NREL Highlights, Research & Development, NREL (National Renewable Energy Laboratory)  

NLE Websites -- All DOE Office Websites (Extended Search)

residential dehumidifiers residential dehumidifiers results in practical performance curves for use in whole-building simulation tools. Dehumidifiers remove moisture from a home's indoor environment, thereby increasing occupant comfort, improving air quality, and reducing the likelihood of mold, rot, and dust mites. To help energy professionals more easily evaluate this technology for the market, National Renewable Energy Laboratory (NREL) researchers tested the efficiency and capacity of a variety of dehumidifiers and developed a generalized approach to simulate any residential dehumidifier. The test results and modeling method are documented in a new report. Typically, dehumidifiers are only rated at a single temperature and humidity, so rating data alone cannot determine whether a product will meet the moisture removal

253

High Dielectric Dummy Loads for ITER ICRH Antenna Laboratory Testing: Numerical Simulation of One Triplet Loading by Ferroelectric Ceramics  

SciTech Connect

Up to now, classical 'water' loads have been used for low power testing of ITER ICRH prototype or mock-up antennas . A fair description of the antenna frequency response is obtained excepted for the phasing (0 {pi} 0 {pi}). High dielectric loads are requested to improve the antenna response in the low frequency band. In view of laboratory testing, dummy loads are also required to have efficient wave spatial attenuation to avoid standing waves and to minimize load volume. In this paper, barium titanate ceramic powders mixed with water are shown to exhibit very attractive electromagnetic properties. Coupling performance of one triplet of the ITER ICRH antenna to such kind of loads is numerically investigated. The radiated wave attenuation into the load is also characterized. In spite of its frequency dispersion, 'barium titanate' loads are shown to allow the characterization of the full scale triplet frequency response on a scaled-down mock-up.

Champeaux, S.; Gouard, Ph. [CEA, DAM, DIF, F-91297 Arpajon (France); Bottollier-Curtet, H. [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Dumortier, P.; Koch, R.; Kyrytsya, V.; Messiaen, A. [Laboratory of Plasma Physics, Association EURATOM-Belgian State, Trilateral Euregio Cluster, Royal Military Academy, B-1000 Brussels (Belgium)

2011-12-23T23:59:59.000Z

254

FINAL STATUS OF GENERAL ENGINEERING LABORATORY AIR FLOW AND DUST TEST PROGRAM. PART I. PART II  

SciTech Connect

A full scale 15 deg sector of the P122 reactor configuration was constructed. The model was complete with respect to all internal cooling air passages, and reflectors, thermal shielding, and island reflector. The contract was terminated before any test data could be obtained. Investigation of the effect of atmospheric dust on performance of reactor systems using wire screen matrix fuel elements is reported. The interim conclusion is that dust would not limit aircraft performance or life. Work proposed but not completed is outlined. Appendices contain previously unpublished reports. (auth)

Venneman, W.F.; Lawrence, R.L.; Ryan, P.T.

1961-05-25T23:59:59.000Z

255

HWMA/RCRA CLOSURE PLAN FOR THE MATERIALS TEST REACTOR WING (TRA-604) LABORATORY COMPONENTS VOLUNTARY CONSENT ORDER ACTION PLAN VCO-5.8 D REVISION2  

SciTech Connect

This Hazardous Waste Management Act/Resource Conservation and Recovery Act closure plan was developed for the laboratory components of the Test Reactor Area Catch Tank System (TRA-630) that are located in the Materials Test Reactor Wing (TRA-604) at the Reactor Technology Complex, Idaho National Laboratory Site, to meet a further milestone established under Voluntary Consent Order Action Plan VCO-5.8.d. The TRA-604 laboratory components addressed in this closure plan were deferred from the TRA-630 Catch Tank System closure plan due to ongoing laboratory operations in the areas requiring closure actions. The TRA-604 laboratory components include the TRA-604 laboratory warm wastewater drain piping, undersink drains, subheaders, and the east TRA-604 laboratory drain header. Potentially contaminated surfaces located beneath the TRA-604 laboratory warm wastewater drain piping and beneath the island sinks located in Laboratories 126 and 128 (located in TRA-661) are also addressed in this closure plan. The TRA-604 laboratory components will be closed in accordance with the interim status requirements of the Hazardous Waste Management Act/Resource Conservation and Recovery Act as implemented by the Idaho Administrative Procedures Act 58.01.05.009 and 40 Code of Federal Regulations 265, Subparts G and J. This closure plan presents the closure performance standards and the methods for achieving those standards.

KIRK WINTERHOLLER

2008-02-25T23:59:59.000Z

256

Help:Approve Page | Open Energy Information  

Open Energy Info (EERE)

link for the approved revision; the approved revision's row will also have a star next to it. Clicking "approve" for any other revision will re-set the approval to that...

257

Laboratory development of sludge washing and alkaline leaching processes: Test plan for FY 1994  

Science Conference Proceedings (OSTI)

The US Department of Energy plans to vitrify (as borosilicate glass) the large volumes of high-level radioactive wastes at the Hanford site. To reduce costs, pretreatment processes will be used to reduce the volume of borosilicate glass required for disposal. Several options are being considered for the pretreatment processes: (1) sludge washing with water or dilute hydroxide: designed to remove most of the Na from the sludge, thus significantly reducing the volume of waste to be vitrified; (2) sludge washing plus caustic leaching and/or metathesis (alkaline sludge leaching): designed to dissolve large quantities of certain nonradioactive elements, such as Al, Cr and P, thus reducing the volume of waste even more; (3) sludge washing, sludge dissolution, and separation of radionuclides from the dissolved sludge solutions (advanced processing): designed to remove all radionuclides for concentration into a minimum waste volume. This report describes a test plan for work that will be performed in FY 1994 under the Sludge Washing and Caustic Leaching Studies Task (WBS 0402) of the Tank Waste Remediation System (TWRS) Pretreatment Project. The objectives of the work described here are to determine the effects of sludge washing and alkaline leaching on sludge composition and the physical properties of the washed sludge and to evaluate alkaline leaching methods for their impact on the volume of borosilicate glass required to dispose of certain Hanford tank sludges.

Rapko, B.M.; Lumetta, G.J.

1994-07-01T23:59:59.000Z

258

Final Results from the High-Current, High-Action Closing Switch Test Program at Sandia National Laboratories  

DOE Green Energy (OSTI)

We tested a variety of high-current closing switches for lifetime and reliability on a dedicated 2 MJ, 500 kA capacitor bank facility at Sandia National Laboratories. Our interest was a switch capable of one shot every few minutes, switching a critically damped, DC-charged 6.2 mF bank at 24 kV, with a peak current of 500 kA. The desired lifetime is 24 thousand shots. Typical of high-energy systems, particularly multi-module systems, the primary parameters of interest related to the switch are: (1) reliability, meaning absence of both pre-fires and no-fires, (2) total switch lifetime or number of shots between maintenance, and (3) cost. Cost was given lower priority at this evaluation stage because there are great uncertainties in estimating higher-quantity prices of these devices, most of which have been supplied before in only small quantities. The categories of switches tested are vacuum discharge, high-pressure discharge, and solid-state. Each group varies in terms of triggering ease, ease of maintenance, and tolerance to faults such as excess current and current reversal. We tested at least two variations of each technology group. The total number of shots on the switch test facility is about 50 thousand. We will present the results from the switch testing. The observed lifetime of different switches varied greatly: the shortest life was one shot; one device was still operating after six thousand shots. On several switches we measured the voltage drop during conduction and calculated energy dissipated in the switch; we will show these data also.

Savage, M.E.

1999-06-23T23:59:59.000Z

259

Nevada geothermal power plant project approved  

Science Conference Proceedings (OSTI)

A proposal to construct and test a 12.5-megawatt geothermal power plant in the Steamboat Hot Springs KGRA in Washoe County, Nevada, has been approved by the Bureau of Land Management (BLM). The power plant could be completed by October 1987. Several stipulations are included in the BLM approval. The stipulations include a program to monitor ground water, surface water, and hydrothermal features to detect any impacts on the hydrology in the Steamboat Hot Springs area. When plant operations are tested, an emission test will be required to verify that noncondensible gas concentrations are within federal and state standards. No geothermal fluid will be discharged on the land's surface. Other stipulations include the special construction of electrical distribution lines to protect birds of prey; the fencing of hazardous areas; and a minimal disturbance of surface areas.

Not Available

1987-07-01T23:59:59.000Z

260

Sandia National Laboratories Albuquerque | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

Laboratories, the laboratories responsible for the development, testing, and production of specialized nonnuclear components. Laboratories: The NNSA Sandia National...

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Advantages of Using the ANSI/ASHRAE 110-1995 Tracer Gas Test Method Versus the ANSI/AIHA Z9.5-1992 Face Velocity Test Method for Chemical Laboratory Hood Certification.  

E-Print Network (OSTI)

??A total of 484 tests were performed on chemical laboratory Hoods (chemical hoods), using the ANSI/AIHA Z9.5-1992 (American National Standard Institute / American Industrial Hygiene (more)

Fahim, Mahdi H.

2007-01-01T23:59:59.000Z

262

Retlif Testing Laboratories  

Science Conference Proceedings (OSTI)

... equipment connected to public low-voltage systems with ... 3.7.2 Electrical transient transmission by capacitive ... inductive coupling via lines other than ...

2013-10-31T23:59:59.000Z

263

Professional Testing Laboratory, Inc.  

Science Conference Proceedings (OSTI)

... 10-12) Rubber Cellular Cushion Used for Carpet or Rug Underlay - Weight, Thickness, and Density. [03/U02] ASTM D297 Ash Content. ...

2013-08-16T23:59:59.000Z

264

Independent Testing Laboratories, Inc.  

Science Conference Proceedings (OSTI)

... 1.2: 2001 Self-Ballasted Lamps for General Lighting Services - Performance Requirements. ... [22/S06] ANSI C82.2:2002 Ballast for Fluorescent ...

2013-07-19T23:59:59.000Z

265

DURABILITY TESTING OF FLUIDIZED BED STEAM REFORMER WASTE FORMS FOR SODIUM BEARING WASTE AT IDAHO NATIONAL LABORATORY  

SciTech Connect

Fluidized Bed Steam Reforming (FBSR) processing of Sodium Bearing Waste simulants was performed in December 2006 by THOR{sup sm} Treatment Technologies LLC (TTT) The testing was performed at the Hazen Research Inc. (HRI) pilot plant facilities in Golden, CO. FBSR products from these pilot tests on simulated waste representative of the SBW at the Idaho Nuclear Technology and Engineering Center (INTEC) were subsequently transferred to the Savannah River National Laboratory (SRNL) for characterization and leach testing. Four as-received Denitration and Mineralization Reformer (DMR) granular/powder samples and four High Temperature Filter (HTF) powder samples were received by SRNL. FBSR DMR samples had been taken from the ''active'' bed, while the HTF samples were the fines collected as carryover from the DMR. The process operated at high fluidizing velocities during the mineralization test such that nearly all of the product collected was from the HTF. Active bed samples were collected from the DMR to monitor bed particle size distribution. Characterization of these crystalline powder samples shows that they are primarily Al, Na and Si, with > 1 wt% Ca, Fe and K. The DMR samples contained less than 1 wt% carbon and the HTF samples ranged from 13 to 26 wt% carbon. X-ray diffraction analyses show that the DMR samples contained significant quantities of the Al{sub 2}O{sub 3} startup bed. The DMR samples became progressively lower in starting bed alumina with major Na/Al/Si crystalline phases (nepheline and sodium aluminosilicate) present as cumulative bed turnover occurred but 100% bed turnover was not achieved. The HTF samples also contained these major crystalline phases. Durability testing of the DMR and HTF samples using the ASTM C1285 Product Consistency Test (PCT) 7-day leach test at 90 C was performed along with several reference glass samples. Comparison of the normalized leach rates for the various DMR and HTF components was made with the reference glasses and the Low Activity Waste (LAW) specification for the Hanford Waste Treatment and Vitrification Plant (WTP). Normalized releases from the DMR and HTF samples were all less than 1 g/m{sup 2}. For comparison, normalized release from the High-Level Waste (HLW) benchmark Environmental Assessment (EA) glass for Si, Li, Na and B ranges from 2 to 8 g/m{sup 2}. The normalized release specification for LAW glass for the Hanford WTP is 2 g/m{sup 2}. The Toxicity Characteristic Leach Test (TCLP) was performed on DMR and HTF as received samples and the tests showed that these products meet the criteria for the EPA RCRA Universal Treatment Standards for all of the constituents contained in the starting simulants such as Cr, Pb and Hg (RCRA characteristically hazardous metals) and Ni and Zn (RCRA metals required for listed wastes).

Crawford, C; Carol Jantzen, C

2007-08-27T23:59:59.000Z

266

A Comprehensive Review of the Tests Completed on the Flow Loop at the Energy Systems Laboratory (Draft)  

E-Print Network (OSTI)

In 1988 the Governor's Energy Office (GEO) of Texas received approval from the U.S. Department of Energy to establish a $98.6 million state-wide retrofit demonstration program, the LoanSTAR (Loan to Save Taxes and Resources) Program. The LoanSTAR Program was designed to demonstrate commercially available, energy efficient, retrofit technologies and techniques. Part of the approved DOE program includes monitoring buildings to determine the effectiveness of the retrofits. The monitoring for this program is composed of thermal metering (chilled and hot water Btu measurements), electrical load metering, psychrometric data (cooling and heating coil temperatures and humidities), and weather monitoring. All of the sensors and monitoring equipment must be calibrated prior to installation and recalibrated periodically while in service. For this purpose, a calibration facility was developed in which National Institute of Standards and Technology (NIST)- traceable instrumentation is maintained (Turner et al. 1992).

Robinson, J.

1992-01-01T23:59:59.000Z

267

Results of HWVP transuranic process waste treatment laboratory and pilot-scale filtration tests using specially ground zeolite  

SciTech Connect

Process waste streams from the Hanford Waste Vitrification Plant (HWVP) may require treatment for cesium, strontium, and transuranic (TRU) element removal in order to meet criteria for incorporation in grout. The approach planned for cesium and strontium removal is ion exchange using a zeolite exchanger followed by filtration. Filtration using a pneumatic hydropulse filter is planned to remove TRU elements which are associated with process solids and to also remove zeolite bearing the cesium and strontium. The solids removed during filtration are recycled to the melter feed system to be incorporated into the HWVP glass product. Fluor Daniel, Inc., the architect-engineering firm for HWVP, recommended a Pneumatic Hydropulse (PHP) filter manufactured by Mott Metallurgical Corporation for use in the HWVP. The primary waste streams considered for application of zeolite contact and filtration are melter off-gas condensate from the submerged bed scrubber (SBS), and equipment decontamination solutions from the Decontamination Waste Treatment Tank (DWTT). Other waste streams could be treated depending on TRU element and radionuclide content. Laboratory and pilot-scale filtration tests were conducted to provide a preliminary assessment of the adequacy of the recommended filter for application to HWVP waste treatment.

Eakin, D.E.

1996-03-01T23:59:59.000Z

268

2011 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site's Advanced Test Reactor Complex Cold Waste Pond  

SciTech Connect

This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (LA 000161 01, Modification B), for the wastewater land application site at the Idaho National Laboratory Site's Advanced Test Reactor Complex Cold Waste Pond from November 1, 2010 through October 31, 2011. The report contains the following information: Facility and system description Permit required effluent monitoring data and loading rates Groundwater monitoring data Status of compliance activities Noncompliance and other issues Discussion of the facility's environmental impacts During the 2011 permit year, approximately 166 million gallons of wastewater were discharged to the Cold Waste Pond. This is well below the maximum annual permit limit of 375 million gallons. As shown by the groundwater sampling data, sulfate and total dissolved solids concentrations are highest near the Cold Waste Pond and decrease rapidly as the distance from the Cold Waste Pond increases. Although concentrations of sulfate and total dissolved solids are elevated near the Cold Waste Pond, both parameters were below the Ground Water Quality Rule Secondary Constituent Standards in the down gradient monitoring wells.

Mike Lewis

2012-02-01T23:59:59.000Z

269

2012 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site's Advanced Test Reactor Complex Cold Waste Pond  

SciTech Connect

This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (#LA 000161 01, Modification B), for the wastewater land application site at the Idaho National Laboratory Sites Advanced Test Reactor Complex Cold Waste Pond from November 1, 2011 through October 31, 2012. The report contains the following information: Facility and system description Permit required effluent monitoring data and loading rates Groundwater monitoring data Status of compliance activities Noncompliance issues Discussion of the facilitys environmental impacts During the 2012 permit year, approximately 183 million gallons of wastewater were discharged to the Cold Waste Pond. This is well below the maximum annual permit limit of 375 million gallons. As shown by the groundwater sampling data, sulfate and total dissolved solids concentrations are highest near the Cold Waste Pond and decrease rapidly as the distance from the Cold Waste Pond increases. Although concentrations of sulfate and total dissolved solids are elevated near the Cold Waste Pond, both parameters were below the Ground Water Quality Rule Secondary Constituent Standards in the down gradient monitoring wells.

Mike Lewis

2013-02-01T23:59:59.000Z

270

Test plan for headspace gas sampling of remote-handled transuranic waste containers at Los Alamos National Laboratory  

DOE Green Energy (OSTI)

Seventeen remote-handled (RH) transuranic (TRU) waste canisters currently are stored in vertical, underground shafts at Technical Area (TA)-54, Area G, at Los Alamos National Laboratory (LANL). These 17 RH TRU waste canisters are destined to be shipped to the Waste Isolation Pilot Plant (WIPP) for permanent disposal in the geologic repository. As the RH TRU canister is likely to be the final payload container prior to placement into the 72-B cask and shipment to the WIPP, these waste canisters provide a unique opportunity to ascertain representative flammable gas concentrations in packaged RH-TRU waste. Hydrogen, which is produced by the radiolytic decomposition of hydrogenous constituents in the waste matrix, is the primary flammable gas of concern with RH TRU waste. The primary objectives of the experiment that is described by this test plan are to sample and analyze the waste canister headspace gases to determine the concentration of hydrogen in the headspace gas and to calculate the hydrogen gas generation rate for comparison to the applicable maximum allowable hydrogen generation rate (mole/sec) limits. It is a goal of this experiment to determine the headspace gas concentrations of other gases (e.g., oxygen, nitrogen, carbon dioxide, carbon monoxide, and volatile organic compounds (VOCs) with molecular weights less than 60 g/mole) that are produced by radiolysis or present when the waste was packaged. Additionally, the temperature, pressure, and flow rate of the headspace gas will be measured.

Field, L.R.; Villarreal, R. [Los Alamos National Lab., NM (United States)

1998-02-24T23:59:59.000Z

271

Independent Oversight Review, Los Alamos National Laboratory - September  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Review, Los Alamos National Laboratory - Review, Los Alamos National Laboratory - September 2011 Independent Oversight Review, Los Alamos National Laboratory - September 2011 September 2011 Review of the Facility Centered Assessment of the Los Alamos National Laboratory Waste Disposition Project This report documents the results of the U.S. Department of Energy (DOE) Office of Health, Safety and Security (HSS) Independent Oversight review of the Facility Centered Assessment (FCA) of the Los Alamos National Laboratory (LANL) Waste Disposition Project (WDP), which includes the Radioassay and Nondestructive Testing (RANT) Facility; Waste Characterization, Reduction, and Repackaging Facility (WCRRF); and Area G transuranic (TRU) waste operations. This report was developed and approved in accordance with DOE O 227.1, Independent Oversight Program. The

272

Highlighting High Performance: National Renewable Energy Laboratory's Thermal Test Facility, Golden, Colorado. Office of Building Technology State and Community Programs (BTS) Brochure  

DOE Green Energy (OSTI)

The National Renewable Energy Laboratory's Thermal Test Facility in Golden, Colorado, was designed using a whole-building approach--looking at the way the building's systems worked together most efficiently. Researchers monitor the performance of the 11,000-square-foot building, which boasts an energy cost savings of 63% for heating, cooling, and lighting. The basic plan of the building can be adapted to many needs, including retail and warehouse space. The Thermal Test Facility contains office and laboratory space; research focuses on the development of energy-efficiency and renewable energy technologies that are cost-effective and environmentally friendly.

Burgert, S.

2002-10-21T23:59:59.000Z

273

DOE-TSPP-8, Approving and Issuing DOE Technical Standards - August 1, 2000  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TSPP-8, Approving and Issuing DOE Technical Standards - August TSPP-8, Approving and Issuing DOE Technical Standards - August 1, 2000 DOE-TSPP-8, Approving and Issuing DOE Technical Standards - August 1, 2000 Technical Standards Program Procedures (TSPP) This procedure provides guidance for approving and issuing DOE Technical Standards. This procedure applies to all DOE Headquarters and field organizations, management and operating contractors, and laboratories (hereafter referred to collectively as "DOE Components") working to the latest revision of DOE Order 252.1, "Technical Standards Program." DOE-TSPP-8, Approving and Issuing DOE Technical Standards - August 1, 2000 More Documents & Publications APPROVING AND ISSUING DOE TECHNICAL STANDARDS DOE-TSPP-8, Approving and Issuing DOE Technical Standards - July 1, 2009

274

Engineering Laboratory Homepage  

Science Conference Proceedings (OSTI)

... and InfrastructureDisaster-Resilient Buildings, Infrastructure, and ... of the Manufacturing Engineering Laboratory. ... Net-Zero Energy Residential Test ...

2013-08-12T23:59:59.000Z

275

Approved by W. Czekaj  

NLE Websites -- All DOE Office Websites (Extended Search)

by W. Czekaj by W. Czekaj ESH Coordinator, SMD 1 June 19, 2012 CONTINGENCY PLAN 90-DAY WASTE STORAGE AREA BUILDING 905 SUPERCONDUCTING MAGNET DIVISION 1.0 Purpose The purpose of this document is to provide working guidelines for building personnel in the event of a spill, fire, or other emergency involving this waste storage area. Response plans for small-scale spills, fires, and medical emergencies are provided in Section 5. This plan is NOT intended as a substitute for emergency response training. Respond to emergencies, spills, or fires ONLY to your level of training. Brookhaven National Laboratory's Standards - Based Management Systems (SBMS) is a Web based information system that contains the most current requirements for spills and emergencies.

276

BWRVIP-262NP: BWR Vessel and Internals Project, Baseline Fracture Toughness and Crack Growth Rate Testing of Alloys X-750 and XM-19 (Idaho National Laboratory Phase I)  

Science Conference Proceedings (OSTI)

The Advanced Test Reactor National Scientific User Facility (ATR NSUF) based at the Idaho National Laboratory (INL) and the Electric Power Research Institute (EPRI) formed an agreement to test representative alloys used as reactor structural materials in a pilot program intended to establish guidelines for future ATR NSUF research programs. This report contains results from the portion of this program established as Phase 1 (of three phases), which entails baseline fracture toughness, stress corrosion cr...

2012-08-06T23:59:59.000Z

277

approved_list  

NLE Websites -- All DOE Office Websites (Extended Search)

3Mar00 3Mar00 Exp # Spokesperson Title Days 762-2 Dunford K-Shell Excitation of He-Like Ni at Intermediate Energy-II 3 763-2X Seweryniak Test of a Method to Study Sub-ms Proton and a Emitters 2 849 Davids Proton Emission Studies of Spherical and Highly Deformed Odd-Odd Nuclei Produced with a 78Kr Beam 6 850 Davids Proton Decay of Highly Deformed La Isotopes 5 851 Kwok Investigation of Vortex Physics: phase transitions, dynamics and weak links 2 853X Lister Test of New FMA Focal Plane Microchannel Plate Detector 1 854X Lister Test of HpGeDSSD Planar Detector 4 855X Hofman BaF2 Array Testing and In-Beam Calibration 4 858 Paul Measurement of 44Ti Nucleosynthesis by g and Atom Counting 7 860 Rehm Study of Backward Angle a Scattering on 44Ti 4 861X Mueller Coulomb Excitation of Unstable Nuclei 5 862 Collon

278

Measurement of the Hydraulic Conductivity of Gravels Using a Laboratory Permeameter and Silty Sands Using Field Testing with Observation Wells.  

E-Print Network (OSTI)

??A new laboratory permeameter was developed for measuring the hydraulic conductivity of gravels ranging from 0.1 to 2 m/s. The release of pneumatic pressure applied (more)

Judge, Aaron

2013-01-01T23:59:59.000Z

279

Hydrologic transport of depleted uranium associated with open air dynamic range testing at Los Alamos National Laboratory, New Mexico, and Eglin Air Force Base, Florida  

SciTech Connect

Hydrologic investigations on depleted uranium fate and transport associated with dynamic testing activities were instituted in the 1980`s at Los Alamos National Laboratory and Eglin Air Force Base. At Los Alamos, extensive field watershed investigations of soil, sediment, and especially runoff water were conducted. Eglin conducted field investigations and runoff studies similar to those at Los Alamos at former and active test ranges. Laboratory experiments complemented the field investigations at both installations. Mass balance calculations were performed to quantify the mass of expended uranium which had transported away from firing sites. At Los Alamos, it is estimated that more than 90 percent of the uranium still remains in close proximity to firing sites, which has been corroborated by independent calculations. At Eglin, we estimate that 90 to 95 percent of the uranium remains at test ranges. These data demonstrate that uranium moves slowly via surface water, in both semi-arid (Los Alamos) and humid (Eglin) environments.

Becker, N.M. [Los Alamos National Lab., NM (United States); Vanta, E.B. [Wright Laboratory Armament Directorate, Eglin Air Force Base, FL (United States)

1995-05-01T23:59:59.000Z

280

approved_list  

NLE Websites -- All DOE Office Websites (Extended Search)

11OCT99 11OCT99 Exp # Spokesperson Title Days 789-2 Clark Exotic Shapes in 106Cd 4 806-2 Kondev Probing the Interplay Between Intrinsic and Collective Motion at the Extremes of Spin, Spin Projection and Seniority 5 821X Hofman In-Beam Test of LEPPEX Fission Chamber and Detectors 3 822 Kwok Patterning of Columnar Defects: Fabrication of Vortex Ratchet System for Manipulating Trapped Flux in High Temperature Superconductors 2 823 Svensson Lifetimes in the (Super)-Deformed (f7/2)4 Intruder Band in the N = Z Nucleus 36Ar 6 825 Janssens Study of 237Np via "Unsafe" Coulomb Excitation: The Role of Proton Excitation in Octupole Correlations 1 830 Smith Identification of Exctied States in the N = Z + 2 Nucleus 11054Xe56 Using Recoil a-Decay Tagging 3 832X Wuosmaa Response of CMOS VLSI Preamplifiers to Ionizing Radiation

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Idaho National Engineering and Environmental Laboratory Licensing Qualification Issues  

E-Print Network (OSTI)

Idaho National Engineering and Environmental Laboratory Licensing Qualification Issues Subcommittee Meeting Oct. 28, 2002 Livermore, CA #12;Idaho National Engineering and Environmental Laboratory · Approach to Regulatory Approval · Nuclear Design Codes · Summary #12;Idaho National Engineering

282

National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratories Los Alamos National Laboratory (the Laboratory) is one of 17 National Laboratories in the United States and is one of the two located in New Mexico. The Laboratory has...

283

Report of results of the vapor vacuum extraction test at the Radioactive Waste Management Complex (RWMC) on the Idaho National Engineering Laboratory (INEL) in the state of Idaho  

SciTech Connect

A test-scale vapor vacuum extraction (VVE) system was installed and operated at the Radioactive Waste Management Complex (RWMC) on the Idaho National Engineering Laboratory (INEL), which is west of Idaho Falls, Idaho and is managed by the US Department of Energy Idaho Field Office. The system was constructed for the purpose of demonstrating the feasibility of VVE or vapor venting technology to abate a volatile organic compound (VOC) plume located in the vadose zone below the subsurface disposal area at the complex. To date, the system has been operated for two periods, a two-week test and a four-month test. The purpose of the two-week test was to determine what would be extracted from the borehole and to verify the design of the system to handle what would be extracted.

Chatwin, T.D.; Miyasaki, D.H.; Sisson, J.B.; Sondrup, A.J.

1992-08-01T23:59:59.000Z

284

Report of results of the vapor vacuum extraction test at the Radioactive Waste Management Complex (RWMC) on the Idaho National Engineering Laboratory (INEL) in the state of Idaho  

SciTech Connect

A test-scale vapor vacuum extraction (VVE) system was installed and operated at the Radioactive Waste Management Complex (RWMC) on the Idaho National Engineering Laboratory (INEL), which is west of Idaho Falls, Idaho and is managed by the US Department of Energy Idaho Field Office. The system was constructed for the purpose of demonstrating the feasibility of VVE or vapor venting technology to abate a volatile organic compound (VOC) plume located in the vadose zone below the subsurface disposal area at the complex. To date, the system has been operated for two periods, a two-week test and a four-month test. The purpose of the two-week test was to determine what would be extracted from the borehole and to verify the design of the system to handle what would be extracted.

Chatwin, T.D.; Miyasaki, D.H.; Sisson, J.B.; Sondrup, A.J.

1992-01-01T23:59:59.000Z

285

SOLERAS - Solar Energy Water Desalination Project: DSET Laboratories. Performance testing of the fresnel point focus concentrating dish  

Science Conference Proceedings (OSTI)

The thernal performance of an 80.3 m/sup 2/ (864 ft/sup 2/) Power Kinetics, Inc. (PKI) fresnel point focus concentrating dish was measured over a period of seven months using SYLTHERM 800 as the heat transfer fluid. Three stages of testing were conducted; initial performance, extended all day operational, and final performance testing. The initial and final performance tests each used three different procedures to measure efficiency in order to quantify the solar concentrator's performance. The all day operational testing represented the ''in situ'' performance of the dish. During the seven months of performance testing, the operation of the dish was thoroughly monitored. All significant problems affecting the normal functioning of the PKI solar concentrator are noted in this report along with any corrective action taken to rectify the problems. Also, a small exposure program was conducted on mirror samples to determine if any reduction in total and specular reflectance occurred due to dirt retention on the mirrors.

Not Available

1985-01-01T23:59:59.000Z

286

WIPP_Panel_7_Approved  

NLE Websites -- All DOE Office Websites (Extended Search)

Panel 7 Certified and Ready for Waste Disposal Panel 7 Certified and Ready for Waste Disposal CARLSBAD, N.M., August 1, 2013 - In mid-July 2013, the New Mexico Environment Department (NMED) approved the use of Panel 7 for disposal of defense- related transuranic (TRU) waste at the Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP). Approval by NMED for each underground waste disposal panel prior to use is required under the WIPP Hazardous Waste Facility Permit (Permit). A panel consists of seven waste disposal rooms and each room is approximately 13 feet high, 33 feet wide and 300 feet long. Mining and outfitting, which includes installation of electricity, monitoring equipment and air regulating bulkheads, of a panel takes about two to two and a half years. Once the mining and outfitting are completed,

287

FY11 Approved LDRD Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Approved LDRD Projects Approved LDRD Projects 2011 Projects Page 1 LDRD Proj. No. Project Title P.I. Dept./Bldg. Directorate 08-002 Strongly Correlated Systems: From Graphene to Quark-Gluon Plasma Kharzeev, D. & Tsvelik, A. PHYS/CMP NPP/BES 08-028 Genomic DNA Methylation: The Epigenetic Response of Arabidopsis Thaliana Genome to Long-term Elevated Atmospheric Temperature and CO 2 in Global Warming Liu, Q. MED/490 & BIO/463 ELS 09-001 Nanoscale Anode Materials for Lithium Batteries Graetz, J. ES&T/ERD GARS 09-002 Bioconversion of Lignocellulose to Ethanol and Butanol Facilitated by Ionic Liquid Preprocessing Francis, A. J./Wishart, J.F./Dunn, J. ES/Chem./Biol ogy ELS 09-003 Organic Photovoltaics: Nanostructure, Solvent Annealing and Performance Ocko, B. PM/510B BES 09-004 Surface Chemisty and

288

FY12 Approved LDRD Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Approved LDRD Projects 2 Approved LDRD Projects 2012 Projects Page 1 LDRD Proj. No. Project Title P.I. Dept./Bldg. Directorate 09-001 Nanoscale Anode Materials for Lithium Batteries Graetz, J. ST/815 GARS 09-003 Organic Photovoltaics: Nanostructure, Solvent Annealing and Performance Ocko, B. PM/510B BES 10-006 Solar Energy Source Evaluation for Smart Grid Development Yue, Meng ES&T/130 GARS 10-007 High Throughput Quantitative Biochemical Phenotyping Rogers, Alistair ES/EE ELS 10-010 Development of an Ultrafast Electron Diffraction Facility for Condensed Matter Physics Challenges Hill, J. CMP/510B BES 10-012 Design of Pt-free Electrocatalysts for Fuel Cell Oxygen Reduction Reactions Khalifah, P. Chemistry/555 BES 10-014 Charge Generation and Transport in Films of Conjugated Polymers for Organic Photovoltaics BNL Part of a

289

HISTORICAL AMERICAN ENGINEERING RECORD - IDAHO NATIONAL ENGINEERING AND ENVIRONMENTAL LABORATORY, TEST AREA NORTH, HAER NO. ID-33-E  

SciTech Connect

Test Area North (TAN) was a site of the Aircraft Nuclear Propulsion (ANP) Project of the U.S. Air Force and the Atomic Energy Commission. Its Cold War mission was to develop a turbojet bomber propelled by nuclear power. The project was part of an arms race. Test activities took place in five areas at TAN. The Assembly & Maintenance area was a shop and hot cell complex. Nuclear tests ran at the Initial Engine Test area. Low-power test reactors operated at a third cluster. The fourth area was for Administration. A Flight Engine Test facility (hangar) was built to house the anticipated nuclear-powered aircraft. Experiments between 1955-1961 proved that a nuclear reactor could power a jet engine, but President John F. Kennedy canceled the project in March 1961. ANP facilities were adapted for new reactor projects, the most important of which were Loss of Fluid Tests (LOFT), part of an international safety program for commercial power reactors. Other projects included NASA's Systems for Nuclear Auxiliary Power and storage of Three Mile Island meltdown debris. National missions for TAN in reactor research and safety research have expired; demolition of historic TAN buildings is underway.

Susan Stacy; Hollie K. Gilbert

2005-02-01T23:59:59.000Z

290

Scaled Vitrification System III (SVS III) Process Development and Laboratory Tests at the West Valley Demonstration Project  

SciTech Connect

At the West Valley Demonstration Project (WVDP),the Vitrification Facility (VF)is designed to convert the high-level radioactive waste (HLW)stored on the site to a stable glass for disposal at a Department of Energy (DOE)-specified federal repository. The Scaled Vitrification System III (SVS-III)verification tests were conducted between February 1995 and August 1995 as a supplemental means to support the vitrification process flowsheet, but at only one seventh the scale.During these tests,the process flowsheet was refined and optimized. The SVS-III test series was conducted with a focus on confirming the applicability of the Redox Forecasting Model, which was based on the Index of Feed Oxidation (IFO)developed during the Functional and Checkout Testing of Systems (FACTS)and SVS-I tests. Additional goals were to investigate the prototypical feed preparation cycle and test the new target glass composition. Included in this report are the basis and current designs of the major components of the Scale Vitrification System and the results of the SVS-III tests.The major subsystems described are the feed preparation and delivery, melter, and off-gas treatment systems. In addition,the correlation between the melter's operation and its various parameters;which included feed rate,cold cap coverage,oxygen reduction (redox)state of the glass,melter power,plenum temperature,and airlift analysis;were developed.

V. Jain; S. M. Barnes; B. G. Bindi; R. A. Palmer

2000-04-30T23:59:59.000Z

291

Advanced Photovoltaic Inverter Functionality using 500 kW Power Hardware-in-Loop Complete System Laboratory Testing: Preprint  

Science Conference Proceedings (OSTI)

With the increasing penetration of distribution connected photovoltaic (PV) systems, more and more PV developers and utilities are interested in easing future PV interconnection concerns by mitigating some of the impacts of PV integration using advanced PV inverter controls and functions. This paper describes the testing of a 500 kW PV inverter using Power Hardware-in-Loop (PHIL) testing techniques. The test setup is described and the results from testing the inverter in advanced functionality modes, not commonly used in currently interconnected PV systems, are presented. PV inverter operation under PHIL evaluation that emulated both the DC PV array connection and the AC distribution level grid connection are shown for constant power factor (PF) and constant reactive power (VAr) control modes. The evaluation of these modes was completed under varying degrees of modeled PV variability.

Mather, B. A.; Kromer, M. A.; Casey, L.

2013-01-01T23:59:59.000Z

292

REQUEST FOR APPROVAL OF OUTSIDE EMPLOYMENT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

APPROVAL OF OUTSIDE EMPLOYMENT APPROVAL OF OUTSIDE EMPLOYMENT TO: Name of supervisor Title and Routing Symbol and Deputy Assistant General Counsel for Standards of Conduct (GC-77) or Chief Counsel for Local Site FROM: Name and Title DATE: I request approval to engage in outside employment as described below: 1. Name of prospective employer 2.

293

TESTING  

E-Print Network (OSTI)

In order to characterize the role that the nations public health laboratories play in the prevention, control and surveillance

unknown authors

2010-01-01T23:59:59.000Z

294

Division of Laboratory Sciences  

E-Print Network (OSTI)

#12;#12;Division of Laboratory Sciences U.S. Department of Health and Human Services Centers and Prevention National Center for Environmental Health Division of Laboratory Sciences Atlanta, Georgia 30341're also working in concert with state public health laboratories, providing training, proficiency testing

295

DOE-TSPP-6-2013, Approving and Issuing DOE Technical Standards | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6-2013, Approving and Issuing DOE Technical Standards 6-2013, Approving and Issuing DOE Technical Standards DOE-TSPP-6-2013, Approving and Issuing DOE Technical Standards Technical Standards Program Procedures (TSPP) - September 16, 2013 This procedure provides guidance for approving and issuing the Department of Energy (DOE) Technical Standards. This procedure applies to all DOE Headquarters and field organizations, management and operating contractors, and laboratories (hereafter referred to collectively as Technical Standards Program (TSP) participants) working to the latest revision of DOE Order (O) 252.1A, Technical Standards Program. DOE-TSPP-6-2013, Approving and Issuing DOE Technical Standards More Documents & Publications DOE-TSPP-7-2013, Maintaining DOE Technical Standards DOE-TSPP-6, Coordination of DOE Technical Standards - July 1, 2009

296

Argonne Tribology Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Tribology Laboratory Tribology Laboratory CemeCon coating chamber CemeCon coating chamber Engineers in Argonne's Tribology Laboratory conduct research on advanced tribological systems (surface engineered materials, lubricants, fuels, and fuel/lubricant additives) for use in aggressive environments (for example, where two surfaces are rubbing together). The Laboratory is equipped with a full range of coating development, friction and wear testing, and characterization facilities. Evaluation of Coatings and Systems The Tribology Laboratory evaluates high performance coatings primarily intended to protect engine-component surfaces that undergo sliding and rolling contact in advanced transportation systems. Also tested are systems powered by diesel and gasoline engines, as well as

297

EIS-0402: Santa Susana Field Laboratory Area IV, California  

Energy.gov (U.S. Department of Energy (DOE))

This EIS evaluates the environmental impacts of remediation of Area IV of the Santa Susana Field Laboratory (SSFL Area IV). SSFL Area IV, occupying approximately 290 acres of the total 2,852-acre SSFL site is located in the hills between Chatsworth and Simi Valley, CA, and was developed as a remote site to test rocket engines and conduct nuclear research. This EIS will evaluate alternatives for disposition of radiological facilities and support buildings, remediation of the affected environment, and disposal of all resulting waste at existing, approved sites.

298

RFI Comments - Idaho National Laboratory  

Science Conference Proceedings (OSTI)

... These vulnerabilities are analyzed the common vulnerability reports produced the by National SCADA Test Bed at the Idaho National Laboratory ...

2013-04-12T23:59:59.000Z

299

Comparisons of field performance to closed-door test T ABLE 1 ratings indicate the laboratory procedure is a valid indica-Design Options to Improve the Energy Efficiency of a  

E-Print Network (OSTI)

#12;#12;Comparisons of field performance to closed-door test T ABLE 1 ratings indicate commercially manufactured refrigerators were u~ as laboratory test beds, a testing sequence of ..as PHASE I cabinets with an optimized Option 2 Evaporator/condenser size, surface r~frige~tion circuit or cvcle were

Oak Ridge National Laboratory

300

Test and evaluation of a solar-powered laboratory turbocompressor system for building heating and cooling. Final technical report. [Rankine cycle  

SciTech Connect

Extensive testing of an available laboratory Rankine-cycle turbocompressor cooling system was conducted over a range of temperatures consistent with present-day flat-plate and advanced medium-concentration solar collectors and at air- and water-cooled condenser temperature levels. Over 700 hours of testing demonstrated the high performance potential of such systems over a wide range of operational conditions and has provided design guidelines and preliminary specifications for future systems. Minor modifications were made to the laboratory system. These modifications included: (1) demonstration of three tons of cooling at a turbine inlet temperature of about 160 F, (2) efficient operation (i.e., COP of approximately 0.45) at turbine inlet temperatures of 240 F at air-cooled condenser temperatures, and (3) a COP in excess of 0.5 and more than five tons of cooling at system turbine inlet temperature levels of 200 F with water-cooled condenser temperatures. Generally, the test data correlated very well with detailed analytical design and off-design performance projections over the range of operating conditions. These data correlations indicate that the achieved performance levels were limited by mismatching of the existing turbomachinery elements. Data and experience obtained in this program substantiate the judgment that incorporating well-matched turbomachinery, based on existing technology, would result in the achievement of the full potential of a turbocompressor system for both air- and water-cooled operation. Prototype turbocompressor systems can be designed and developed which demonstrate high performance, (i.e., a COP approaching 1.0 and 0.75 for water and air-cooled operation, respectively), versatile operational features, permitting use of different collectors with a range of temperature capability, and potential for significant energy savings when used as solar-powered heating and cooling systems.

Biancardi, F.R.; Meader, M.D. Melikian, G.; Landerman, A.M.; Hall, J.B.

1977-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

On Line Beamline Commissioning Activity Approval Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Commissioning Activity Approval Form Commissioning Activity Approval Form This form is to be filled by the Commissioning Activity Team Leader. No beamline commissioning activities will be allowed to run without a properly completed, approved, and posting of this commissioning approval form. You will be notified by e-mail upon approval. Sector Beamline Expected Start Date Expected Duration 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 BM ID ( Give a Unit) Activity Description( Give only a brief description) Commissioning Team Members First and Last Name Affiliation Phone Number 1. 2. 3. 4. 5. 6. Special Safety Concerns Commissioning Activity Team Leader Name E-Mail Address Submit Commissioning Activity Approval Form Clear all Fields and start All over again!!!

302

Review of PV module performance at DOE/MIT Lincoln Laboratory test sites during the period 1977 to 1982  

DOE Green Energy (OSTI)

During the years 1977 to 1982, over 11,000 photovoltaic (PV) modules have been placed at experimental PV power generating systems in a number of field test sites in the United States. Prominent among these are a 100-kW system at Natural Bridges National Monument in Utah, a 25-kWp system at Mead, Nebraska, and a 15-kW system at Bryan, Ohio. Through a program of periodic surveillance, measurements, and inspections at the aforementioned sites, electrically failed modules were located, removed and analyzed during this six-year period. The principal causes of failure were: (1) cells cracked due to weathering or internal module stresses, (2) failed solder joints, (3) interconnects not soldered to rear sides of cells at assembly, (4) cells or interconnects electrically shorted to metallic substrates, and (5) broken or split interconnects. Details and photographs of many of the different types of failures are presented and some of the analysis techniques used to locate the failures are described.

Forman, S E; Themelis, M P

1982-01-01T23:59:59.000Z

303

Security Council Approval of Kofi  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9 9 Week Ending Friday, December 20, 1996 Statement on the United Nations Security Council Approval of Kofi Annan as Secretary-General December 13, 1996 I'm delighted by today's vote in the United Nations Security Council, selecting Kofi Annan of Ghana to be the new U.N. Sec- retary-General. We are hopeful that the Gen- eral Assembly will concur with the Security Council early next week. Through his decades of work at the United Nations and in the international arena, Kofi Annan has established excellent working re- lations with many countries, including the United States. Over the last 4 years as U.N. Undersecretary for Peacekeeping, and throughout his impressive career, he has proven himself an able and energetic man- ager-professional, impartial, well-versed in

304

NNSA approves LANL workforce reduction plan  

NLE Websites -- All DOE Office Websites (Extended Search)

this spring through a voluntary separation program has been approved by the National Nuclear Security Administration, LANL Director Charlie McMillan announced today. Eligible...

305

Approved DOE Technical Standards | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Technical Standards Approved DOE Technical Standards DOE Technical Standards Program August 16, 2013 Technical Standards, DOE-HDBK-1108-2002 Change Notice 2 (July 2013)...

306

ADVOCACY GUIDING VALUES AND APPROVAL PROCESS ...  

Science Conference Proceedings (OSTI)

reviewed with the Board of Directors in order to obtain their approval before proceeding ... which it does provide advocacy and will openly communicate its...

307

Converting Simulated Sodium-bearing Waste into a Single Solid Waste Form by Evaporation: Laboratory- and Pilot-Scale Test Results on Recycling Evaporator Overheads  

SciTech Connect

Conversion of Idaho National Engineering and Environmental Laboratory radioactive sodium-bearing waste into a single solid waste form by evaporation was demonstrated in both flask-scale and pilot-scale agitated thin film evaporator tests. A sodium-bearing waste simulant was adjusted to represent an evaporator feed in which the acid from the distillate is concentrated, neutralized, and recycled back through the evaporator. The advantage to this flowsheet is that a single remote-handled transuranic waste form is produced in the evaporator bottoms without the generation of any low-level mixed secondary waste. However, use of a recycle flowsheet in sodium-bearing waste evaporation results in a 50% increase in remote-handled transuranic volume in comparison to a non-recycle flowsheet.

Griffith, D.; D. L. Griffith; R. J. Kirkham; L. G. Olson; S. J. Losinski

2004-01-01T23:59:59.000Z

308

Laboratory Reagents  

SciTech Connect

Replaced by WMH-310, Section 4.17. This document outlined the basic methodology for preparing laboratory reagents used in the 222-S Standards Laboratory. Included were general guidelines for drying, weighing, transferring, dissolving, and diluting techniques common when preparing laboratory reagents and standards. Appendix A contained some of the reagents prepared by the laboratory.

CARLSON, D.D.

1999-10-08T23:59:59.000Z

309

Georgia Commercial Laboratory Act (Georgia) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Georgia Commercial Laboratory Act (Georgia) Georgia Commercial Laboratory Act (Georgia) Georgia Commercial Laboratory Act (Georgia) < Back Eligibility Commercial Developer Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Georgia Program Type Environmental Regulations Equipment Certification Provider Georgia Department of Natural Resources The Georgia Commercial Laboratory Act requires all commercial environmental laboratories submitting data to the Environmental Protection Division (EPD) for regulatory purposes to be approved or accredited by an EPD approved accrediting authority. Data submitted for regulatory purposes means any data which is to be submitted to the EPD, or required to be retained on

310

Laboratory tests to evaluate and study formation damage with low-density drill-in fluids (LDDIF) for horizontal well completions in low pressure and depleted reservoirs  

E-Print Network (OSTI)

The increasing number of open hole horizontal well completions in low-pressure and depleted reservoirs requires the use of non-damaging low-density drill-in fluids (LDDIF) to avoid formation damage and realize optimum well productivity. To address this need we have formulated new LDDIFS with specific density lower than 1.0 sg (8.34 ppg) specifically to drill and complete low pressure and depleted reservoirs with minimum formation damage and maximum production. These materials exhibit typical drilling fluid characteristics, allowing the well to be safely drilled (0 required well depth but also perform as completion fluids, lessening formation damage to a greater extent than fluids with greater density and higher wellbore pressures. The new LDDIF incorporates low-density hollow glass spheres (HGS) to allow near-balanced drilling in low pressure and depleted reservoirs. The LDDIF uses potassium chloride (KCI) brine as the base fluid because of its low density and inhibition of clay hydration and employs low concentrations of the HGS so that fluid rheology is not altered. We have conducted extensive laboratory testing to compare performance of the HGS LDDIF with that of conventional horizontal well DIFs. Experiments consisted of permeability regain tests on unconsolidated sands with sand control screens. Test variables included temperature, concentration of drill solids cleanup technique and HGS concentration. Test results have shown that the new fluids are up to 50% easier to remove from the wellbore formation faces and provide higher productivity than higher density fluids. Such results indicate that higher well productivity from wells with less impairment would offset any added costs of HGS additives in the fluids.

Chen, Guoqiang

2002-01-01T23:59:59.000Z

311

The Results From the First High-Pressure Melt Ejection Test Completed in the Molten Fuel Moderator Interaction Facility at Chalk River Laboratories  

SciTech Connect

A high-pressure melt ejection test using prototypical corium was conducted at Atomic Energy of Canada Limited Chalk River Laboratories. This test was planned by the CANDU Owners Group to study the potential for an energetic interaction between molten fuel and water under postulated single-channel flow-blockage events. The experiments were designed to address regulator concerns surrounding this very low probability postulated accident events in CANDU Pressurized Heavy Water Reactors. The objective of the experimental program is to determine whether a highly energetic 'steam explosion' and associated high-pressure pulse, is possible when molten material is finely fragmented as it is ejected from a fuel channel into the heavy-water moderator. The finely fragmented melt particles would transfer energy to the moderator as it is dispersed, creating a modest pressure pulse in the calandria vessel. The high-pressure melt ejection test consisted of heating up a {approx} 5 kg thermite mixture of U, U{sub 3}O{sub 8}, Zr, and CrO{sub 3} inside a 1.14-m length of insulated pressure tube. When the molten material reached the desired temperature of {approx} 2400 deg C, the pressure inside the tube was raised to 11.6 MPa, failing the pressure tube at a pre-machined flaw, and releasing the molten material into the surrounding tank of 68 deg C water. The experiment investigated the dynamic pressure history, debris size, and the effects of the material interacting with tubes representing neighbouring fuel channels. The measured mean particle size was 0.686 mm and the peak dynamic pressures were between 2.54 and 4.36 MPa, indicating that an energetic interaction between the melt and the water did not occur in the test. (authors)

Nitheanandan, T.; Kyle, G.; O'Connor, R.; Sanderson, DB. [Chalk River Laboratories, Atomic Energy of Canada Limited, Chalk River, Ontario, Canada, K0J 1J0 (Canada)

2006-07-01T23:59:59.000Z

312

NNSA's Cielo Supercomputer Approved for Classified Operation...  

National Nuclear Security Administration (NNSA)

which supports Lawrence Livermore National Laboratory, Los Alamos National Laboratory (LANL) and Sandia National Laboratories, is a petascale supercomputer that helps NNSA ensure...

313

Issued by: Approved by: Environmental Health and Safety Radiation Protection Committee Date issued: Date approved: Date revised: Date revision approved:  

E-Print Network (OSTI)

contamination for most radioactive materials in use is 0.5Bq per square centimeter. Different Action Levels for certain radioisotopes may be required and will be listed in the conditions of the Internal Radioisotope Permit. The contamination level may be averaged over an area not exceeding 100 square centimeters. Accidental release: Is defined as the accidental release of radioactive material resulting in following levels of radiation levels: o Greater than 2 mSv/hour on the external surface of a package o Greater than 0.1 mSv/hour at a distance of 1m from the package ALI Annual Limit on Intake Added: The International Commission on Radiological Protection (ICRP) has published Annual Limits on Intake of Radionuclides by Workers Based on the 1990 Recommendations (Publication 60) of the ICRP for limiting dose. The annual limit on intake (ALI) is the maximum intake in becquerel (1 Bq = 1 disintegration per second) that a worker may ingest orally and not exceed his/her annual average dose limit as per the 1990 recommendations. This average annual limit was 20 mSv. The ALIs themselves are published in ICRP Publication 61. The CNSC requires the University to classify each area room or enclosure where unsealed radioactive materials are used at a single time as Basic Level if the quantity does not exceed 5ALIs or Intermediate Level if the quantity does not exceed 50ALIs. (addition approved by RSCttee Feb 2, 2006) Applicable Designated Workers and Permit Holders For the purposes of this defining when dosimetry is required (RSP-310), staff and students working in a lab designated as Intermediate according to RSP-411, working with sealed sources over 370 kBq and personnel working in a Basic Laboratory with radioisotopes other than H-3, C-14, S-35, Ca-45 and P-33 may be considered

unknown authors

2005-01-01T23:59:59.000Z

314

EIS-0402: Santa Susana Field Laboratory Area IV, California | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: Santa Susana Field Laboratory Area IV, California 2: Santa Susana Field Laboratory Area IV, California EIS-0402: Santa Susana Field Laboratory Area IV, California Summary This EIS evaluates the environmental impacts of remediation of Area IV of the Santa Susana Field Laboratory (SSFL Area IV). SSFL Area IV, occupying approximately 290 acres of the total 2,852-acre SSFL site is located in the hills between Chatsworth and Simi Valley, CA, and was developed as a remote site to test rocket engines and conduct nuclear research. This EIS will evaluate alternatives for disposition of radiological facilities and support buildings, remediation of the affected environment, and disposal of all resulting waste at existing, approved sites. Public Comment Opportunities No public comment opportunities available at this time.

315

FDA Approves First Bionic Eye for the Blind | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FDA Approves First Bionic Eye for the Blind FDA Approves First Bionic Eye for the Blind FDA Approves First Bionic Eye for the Blind February 14, 2013 - 1:06pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON- The U.S. Department of Energy announced today that its support for a decade of revolutionary research has contributed to the creation of the first ever retinal prosthesis - or bionic eye - to be approved in the United States by the U.S. Food and Drug Administration for blind individuals with end-stage retinitis pigmentosa. "The development of the artificial retina is just one more example of the unique value of our National Laboratories and research universities," said Energy Secretary Steven Chu. "While no one can predict a breakthrough before it happens, the investments we're making in research

316

300 Area Treatability Test: Laboratory Development of Polyphosphate Remediation Technology for In Situ Treatment of Uranium Contamination in the Vadose Zone and Capillary Fringe  

SciTech Connect

This report presents results from bench-scale treatability studies conducted under site-specific conditions to optimize the polyphosphate amendment for implementation of a field-scale technology demonstration to stabilize uranium within the 300 Area vadose and smear zones of the Hanford Site. The general treatability testing approach consisted of conducting studies with site sediment and under site conditions, to develop an effective chemical formulation and infiltration approach for the polyphosphate amendment under site conditions. Laboratory-scale dynamic column tests were used to 1) quantify the retardation of polyphosphate and its degradation products as a function of water content, 2) determine the rate of polyphosphate degradation under unsaturated conditions, 3) develop an understanding of the mechanism of autunite formation via the reaction of solid phase calcite-bound uranium and aqueous polyphosphate remediation technology, 4) develop an understanding of the transformation mechanism, the identity of secondary phases, and the kinetics of the reaction between uranyl-carbonate and -silicate minerals with the polyphosphate remedy under solubility-limiting conditions, and 5) quantify the extent and rate of uranium released and immobilized based on the infiltration rate of the polyphosphate remedy and the effect of and periodic wet-dry cycling on the efficacy of polyphosphate remediation for uranium in the vadose zone and smear zone.

Wellman, Dawn M.; Pierce, Eric M.; Bacon, Diana H.; Oostrom, Martinus; Gunderson, Katie M.; Webb, Samuel M.; Bovaird, Chase C.; Cordova, Elsa A.; Clayton, Eric T.; Parker, Kent E.; Ermi, Ruby M.; Baum, Steven R.; Vermeul, Vincent R.; Fruchter, Jonathan S.

2008-09-30T23:59:59.000Z

317

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

of the utilitys electrical power grid; 2) an approach toElectrical and Electronics Engineers Standard 1547 and powertheir electrical integration. In combined-heat-and-power

Eto, Joe

2009-01-01T23:59:59.000Z

318

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

of the utilitys electrical power grid; 2) an approach toElectrical and Electronics Engineers Standard 1547 and powertheir electrical integration. In combined-heat-and-power

ETO, J.

2010-01-01T23:59:59.000Z

319

Roadside Testing Laboratory Media Event  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Showcase October 14, 2010 | Greeneville, Tennessee Background The Federal Motor Carrier Safety Administration (FMCSA) launched the Commercial Motor Vehicle Roadside...

320

LABORATORY TESTING OF SOME PHOSPHORUS ...  

Science Conference Proceedings (OSTI)

... gas line maintained at 200 "C. The spectrometer was fitted with a 5 m variable path length heated gas cell (200 "C) with calcium fluoride windows. ...

2011-10-20T23:59:59.000Z

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

emerging potential of distributed generation using a systemKeywords: CHP, UPS, distributed generation, intentionalmanagement systems, distributed generation, and modeling

Lasseter, R. H.

2010-01-01T23:59:59.000Z

322

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

needed to operate microgrids consisting of generatingdemonstrations involving microgrids that involve one or moreimprovements offered by microgrids. KEYWORDS Field

Eto, Joe

2009-01-01T23:59:59.000Z

323

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

Autonomous Control of Microgrids, IEEE PES Meeting,engineering needed to operate microgrids consisting of smallreduction of cost, meshed microgrids and frequency based

Lasseter, R. H.

2010-01-01T23:59:59.000Z

324

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

needed to operate microgrids consisting of generatingdemonstrations involving microgrids that involve one or moreimprovements offered by microgrids. KEYWORDS Field

ETO, J.

2010-01-01T23:59:59.000Z

325

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

Eto. 2002. Integration of Distributed Energy Resources: Thesite. In this context, distributed energy resources smallelectric power. The distributed energy resources portfolio

ETO, J.

2010-01-01T23:59:59.000Z

326

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

Paper on Integration of Distributed Energy Resources: Thesite. In this context, distributed energy resources smallelectric power. The distributed energy resources portfolio

Eto, Joe

2009-01-01T23:59:59.000Z

327

CERTS Microgrid Laboratory Test Bed  

E-Print Network (OSTI)

power conditioning system which together provide the necessary power and voltage control required for operation

Lasseter, R. H.

2010-01-01T23:59:59.000Z

328

Bentley Prince Street Testing Laboratory  

Science Conference Proceedings (OSTI)

... 10-12) Rubber Cellular Cushion Used for Carpet or Rug Underlay - Weight, Thickness, and Density. [03/U02] ASTM D297 Ash Content. ...

2013-08-16T23:59:59.000Z

329

Rockwell Automation Test Laboratories - Milwaukee  

Science Conference Proceedings (OSTI)

... Contactors and motor-starters - AC semiconductor motor controllers and ... and measurement techniques - Power frequency magnetic field immunity ...

2014-01-03T23:59:59.000Z

330

Clark Dynamic Test Laboratory, Inc.  

Science Conference Proceedings (OSTI)

... [12/50121cc] EN 50121-3-2 (2006) Railway applications - Electromagnetic compatibility -- Part 3-2: Rolling stock - Apparatus. ...

2013-09-20T23:59:59.000Z

331

Crack growth rates and metallographic examinations of Alloy 600 and Alloy 82/182 from field components and laboratory materials tested in PWR environments.  

Science Conference Proceedings (OSTI)

In light water reactors, components made of nickel-base alloys are susceptible to environmentally assisted cracking. This report summarizes the crack growth rate results and related metallography for field and laboratory-procured Alloy 600 and its weld alloys tested in pressurized water reactor (PWR) environments. The report also presents crack growth rate (CGR) results for a shielded-metal-arc weld of Alloy 182 in a simulated PWR environment as a function of temperature between 290 C and 350 C. These data were used to determine the activation energy for crack growth in Alloy 182 welds. The tests were performed by measuring the changes in the stress corrosion CGR as the temperatures were varied during the test. The difference in electrochemical potential between the specimen and the Ni/NiO line was maintained constant at each temperature by adjusting the hydrogen overpressure on the water supply tank. The CGR data as a function of temperature yielded activation energies of 252 kJ/mol for a double-J weld and 189 kJ/mol for a deep-groove weld. These values are in good agreement with the data reported in the literature. The data reported here and those in the literature suggest that the average activation energy for Alloy 182 welds is on the order of 220-230 kJ/mol, higher than the 130 kJ/mol commonly used for Alloy 600. The consequences of using a larger value of activation energy for SCC CGR data analysis are discussed.

Alexandreanu, B.; Chopra, O. K.; Shack, W. J.

2008-05-05T23:59:59.000Z

332

Numerical Simulation and Laboratory Testing of Time-Frequency MUSIC Beamforming for Identifying Continuous and Impulsive Ground Targets from a Mobile Aerial Platform  

E-Print Network (OSTI)

When a microphone array is mounted on a mobile aerial platform, such as an unmanned aerial vehicle (UAV), most existing beamforming methods cannot be used to adequately identify continuous and impulsive ground. Here, numerical simulation results and laboratory experiments are presented that validate a proposed time-frequency beamforming method based on the Multiple Signal Classification (MUSIC) algorithm to detect these acoustic sources from a mobile aerial platform. In the numerical simulations three parameters were varied to test the proposed algorithms location estimation performance: 1) the acoustic excitation types; 2) the moving receivers simulated flight conditions; and 3) the number of acoustic sources. Also, a distance and angle error analysis was done to quantify the proposed algorithms source location estimation accuracy when considering microphone positioning uncertainty. For experimental validation, three laboratory experiments were conducted. Source location estimations were done for: a 600 Hz sine source, a banded white noise source between 700-800 Hz, and a composite source combined simultaneously with both the sine and banded white noise sources. The proposed algorithm accurately estimates the simulated monopoles location coordinates no matter the excitation type or simulated trajectory. When considering simultaneously-excited, multiple monopoles at high altitudes, e.g. 50 m, the proposed algorithm had no error when estimating the sources locations. Finally, a distance and angle error analysis exposed how relatively small microphone location error, e.g. 1 cm maximum error, can propagate into large averaged distance error of about 10 m in the far-field for all monopole excitation types. For all simulations, however, the averaged absolute angle error remained small, e.g. less than 4 degrees, even when considering a 5 cm maximum microphone location error. For the laboratory experiments, the sine source had averaged distance and absolute angle errors of 0.9 m and 14.07 degrees from the sources true location, respectively. Similarly, the banded white noise sources averaged distance and absolute angle errors were 1.9 m and 47.14 degrees; and lastly, the averaged distance and absolute angle errors of 0.78 m and 8.14 degrees resulted when both the sources were simultaneously excited.

Silva, Ramon Alejandro

2013-05-01T23:59:59.000Z

333

Idaho National Laboratory - Hydropower Program: Hydrofacts  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratory Studies of the Effects of Pressure on Turbine-Passed Fish - Test Protocol Submitted By Pacific Northwest National Laboratory, Richland, Washington Background Changes in...

334

NREL: Solar Radiation Research - Metrology Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Metrology Laboratory Photo of Solar Radiation Research Laboratory researchers inspecting radiometers mounted to calibration tables at the outside test site. Researchers at the...

335

Idaho National Laboratory Lead or Lead-Bismuth Eutectic (LBE) Test Facility - R&D Requirements, Design Criteria, Design Concept, and Concept Guidance  

SciTech Connect

The Idaho National Laboratory Lead-Bismuth Eutectic Test Facility will advance the state of nuclear technology relative to heavy-metal coolants (primarily Pb and Pb-Bi), thereby allowing the U.S. to maintain the pre-eminent position in overseas markets and a future domestic market. The end results will be a better qualitative understanding and quantitative measure of the thermal physics and chemistry conditions in the molten metal systems for varied flow conditions (single and multiphase), flow regime transitions, heat input methods, pumping requirements for varied conditions and geometries, and corrosion performance. Furthering INL knowledge in these areas is crucial to sustaining a competitive global position. This fundamental heavy-metal research supports the National Energy Policy Development Groups stated need for energy systems to support electrical generation.1 The project will also assist the Department of Energy in achieving goals outlined in the Nuclear Energy Research Advisory Committee Long Term Nuclear Technology Research and Development Plan,2 the Generation IV Roadmap for Lead Fast Reactor development, and Advanced Fuel Cycle Initiative research and development. This multi-unit Lead-Bismuth Eutectic Test Facility with its flexible and reconfigurable apparatus will maintain and extend the U.S. nuclear knowledge base, while educating young scientists and engineers. The uniqueness of the Lead-Bismuth Eutectic Test Facility is its integrated Pool Unit and Storage Unit. This combination will support large-scale investigation of structural and fuel cladding material compatibility issues with heavy-metal coolants, oxygen chemistry control, and thermal hydraulic physics properties. Its ability to reconfigure flow conditions and piping configurations to more accurately approximate prototypical reactor designs will provide a key resource for Lead Fast Reactor research and development. The other principal elements of the Lead-Bismuth Eutectic Test Facility (in addition to the Pool Unit and Storage Unit) are the Bench Scale Unit and Supporting Systems, principal of which are the O2 Sensor/Calibration System, Feed System, Transfer System, Off- Gas System, Purge and Evacuation System, Oxygen Sensor and Control System, Data Acquisition and Control System, and the Safety Systems. Parallel and/or independent corrosion studies and convective heat transfer experiments for cylindrical and annular geometries will support investigation of heat transfer phenomena into the secondary side. In addition, molten metal pumping concepts and power requirements will be measured for future design use.

Eric P. Loewen; Paul Demkowicz

2005-05-01T23:59:59.000Z

336

TEST  

Science Conference Proceedings (OSTI)

This is an abstract. TEST Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras lacinia dui et est venenatis lacinia. Vestibulum lacus dolor, adipiscing id mattis sit amet, ultricies sed purus. Nulla consectetur aliquet feugiat. Maecenas ips

337

2010 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Sites Advanced Test Reactor Complex Cold Waste Pond  

Science Conference Proceedings (OSTI)

This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (#LA 000161 01, Modification B), for the wastewater land application site at the Idaho National Laboratory Sites Advanced Test Reactor Complex Cold Waste Pond from November 1, 2009 through October 31, 2010. The report contains the following information: Facility and system description Permit required effluent monitoring data and loading rates Groundwater monitoring data Status of compliance activities Discussion of the facilitys environmental impacts During the 2010 permit year, approximately 164 million gallons of wastewater were discharged to the Cold Waste Pond. As shown by the groundwater sampling data, sulfate and total dissolved solids concentrations are highest near the Cold Waste Pond and decrease rapidly as the distance from the Cold Waste Pond increases. Although concentrations of sulfate and total dissolved solids are elevated near the Cold Waste Pond, both parameters were below the Ground Water Quality Rule Secondary Constituent Standards in the down gradient monitoring wells.

mike lewis

2011-02-01T23:59:59.000Z

338

A Transient Numerical Simulation of Perched Ground-Water Flow at the Test Reactor Area, Idaho National Engineering and Environmental Laboratory, Idaho, 1952-94  

SciTech Connect

Studies of flow through the unsaturated zone and perched ground-water zones above the Snake River Plain aquifer are part of the overall assessment of ground-water flow and determination of the fate and transport of contaminants in the subsurface at the Idaho National Engineering and Environmental Laboratory (INEEL). These studies include definition of the hydrologic controls on the formation of perched ground-water zones and description of the transport and fate of wastewater constituents as they moved through the unsaturated zone. The definition of hydrologic controls requires stratigraphic correlation of basalt flows and sedimentary interbeds within the saturated zone, analysis of hydraulic properties of unsaturated-zone rocks, numerical modeling of the formation of perched ground-water zones, and batch and column experiments to determine rock-water geochemical processes. This report describes the development of a transient numerical simulation that was used to evaluate a conceptual model of flow through perched ground-water zones beneath wastewater infiltration ponds at the Test Reactor Area (TRA).

B. R. Orr (USGS)

1999-11-01T23:59:59.000Z

339

NEUP Approved Universities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NEUP Approved Universities NEUP Approved Universities NEUP Approved Universities U.S. universities and colleges must apply to the U.S. Department of Energy to administer NEUP scholarships and fellowships. That is done through a separate solicitation operated by the Department of Energy's Idaho field office. If your university is not listed below, contact NEUP@inl.gov. Approved Universities Auburn University Boise State University Clemson University College of Southern Maryland Colorado School of Mines Duke University Francis Marion University Georgia Institute of Technology Idaho State University Illinois Institute of Technology Kansas State University Lakeshore Community College Linn State Technical College Massachusetts Institute of Technology Miami Dade College Missouri University of Science & Technology

340

Hydrogen Sensor Testing, Hydrogen Technologies (Fact Sheet)  

DOE Green Energy (OSTI)

Factsheet describing the hydrogen sensor testing laboratory at the National Renewable Energy Laboratory.

Not Available

2008-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Materials Science & Technology, MST: Los Alamos National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Investigations Laboratory Mechanical testing and modeling in MST Sigma Complex Los Alamos National Laboratory's Materials Science and Technology Division provides...

342

DOE Technical Standards Program: Recently Approved DOE Technical...  

NLE Websites -- All DOE Office Websites (Extended Search)

Recently Approved DOE Technical Standards Office of Nuclear Safety This page lists DOE technical standards that have been approved and added to the distribution. If they are...

343

Energy Praises the Nuclear Regulatory Commission Approval of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Praises the Nuclear Regulatory Commission Approval of the First United States Nuclear Plant Site in Over 30 Years Energy Praises the Nuclear Regulatory Commission Approval of the...

344

DOE Guidance-Approval Process for Dual Compensation Waivers for...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Approval Process for Dual Compensation Waivers for Reemployed Annuitants DOE Guidance-Approval Process for Dual Compensation Waivers for Reemployed Annuitants Guidance Memorandum...

345

Energy Department Approves Gulf Coast Exports of Liquefied Natural...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Department Approves Gulf Coast Exports of Liquefied Natural Gas Energy Department Approves Gulf Coast Exports of Liquefied Natural Gas May 20, 2011 - 1:00pm Addthis...

346

ISA Approves Standard for Wireless Automation in Process Control...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the...

347

Energy Department Approves Gulf Coast Exports of Liquefied Natural...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Department Approves Gulf Coast Exports of Liquefied Natural Gas Energy Department Approves Gulf Coast Exports of Liquefied Natural Gas May 20, 2011 - 12:00am Addthis...

348

Air Quality Approvals and Permits (New Brunswick, Canada) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Air Quality Approvals and Permits (New Brunswick, Canada) Air Quality Approvals and Permits (New Brunswick, Canada) Eligibility Commercial Construction Developer Industrial...

349

The Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

existing programs in climate change science and infrastructure. The Laboratory has a 15- year history in climate change science. The Climate, Ocean and Sea Ice Modeling (COSIM)...

350

Idaho National Laboratory - Enforcement Documents  

NLE Websites -- All DOE Office Websites (Extended Search)

associated with Replacement of Exhaust Ventilation Filters at the Test Reactor Area Hot Cell Facility at the Idaho National Engineering and Environmental Laboratory, May 19,...

351

Standards Testing Infrastructure  

Science Conference Proceedings (OSTI)

... Group Leader Information Technology Laboratory Software and ... in collaboration with health IT stakeholders ... a variety of testing services: The testing ...

2011-02-02T23:59:59.000Z

352

Home Smoke Alarm Tests  

Science Conference Proceedings (OSTI)

... alarm technologies in a controlled laboratory test ... arrangements and maximize the test instrumentation. ... Centers for Disease Control and Prevention ...

2013-07-07T23:59:59.000Z

353

Biotransformation of PCBs in Substation Soils: A Review of Laboratory and Pilot-Scale Testing for the Development of an In Situ Proc ess for PCB Biotransformation in Soils  

Science Conference Proceedings (OSTI)

In situ methods are desirable for remediation of polychlorinated biphenyls (PCBs), to prevent disruption of activities at industrial sites such as substations. This study follows the development, from laboratory testing through pilot-scale demonstration, of an in situ soil irrigation process for biotransformation of PCBs in soils.

2001-11-05T23:59:59.000Z

354

NREL: Energy Storage - Laboratory Capabilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratory Capabilities Laboratory Capabilities Photo of NREL's Energy Storage Laboratory. NREL's Energy Storage Laboratory. Welcome to our Energy Storage Laboratory at the National Renewable Energy Laboratory (NREL) in Golden, Colorado. Much of our testing is conducted at this state-of-the-art laboratory, where researchers use cutting-edge modeling and analysis tools to focus on thermal management systems-from the cell level to the battery pack or ultracapacitor stack-for electric, hybrid electric, and fuel cell vehicles (EVs, HEVs, and FCVs). In 2010, we received $2 million in funding from the U.S. Department of Energy under the American Recovery and Reinvestment Act of 2009 (ARRA) to enhance and upgrade the NREL Battery Thermal and Life Test Facility. The Energy Storage Laboratory houses two unique calorimeters, along with

355

Safeguards Laboratory (SL) | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Safeguards Laboratory Safeguards Laboratory May 30, 2013 The Safeguards Laboratory is a Department of Energy user facility equipped with a comprehensive set of field-deployable instrumentation for safeguards system development and personnel training. Mock-ups using industrial equipment and reference nuclear materials simulate real-world conditions for training, testing, and evaluations. The lab's openness and availability to the private sector enable development of new technologies that combat the proliferation of weapons of mass destruction. Applications Training and International Outreach Nondestructive Analysis Measurements Instrument Evaluations Integrated Safeguards Methodologies Measurement Technique Development Specifications Gamma and X-ray detection systems Handheld survey instruments

356

Alternative Fuels Data Center: Underwriters Laboratories Ethanol Dispenser  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Underwriters Underwriters Laboratories Ethanol Dispenser Safety Testing to someone by E-mail Share Alternative Fuels Data Center: Underwriters Laboratories Ethanol Dispenser Safety Testing on Facebook Tweet about Alternative Fuels Data Center: Underwriters Laboratories Ethanol Dispenser Safety Testing on Twitter Bookmark Alternative Fuels Data Center: Underwriters Laboratories Ethanol Dispenser Safety Testing on Google Bookmark Alternative Fuels Data Center: Underwriters Laboratories Ethanol Dispenser Safety Testing on Delicious Rank Alternative Fuels Data Center: Underwriters Laboratories Ethanol Dispenser Safety Testing on Digg Find More places to share Alternative Fuels Data Center: Underwriters Laboratories Ethanol Dispenser Safety Testing on AddThis.com... Underwriters Laboratories Ethanol Dispenser Safety Testing

357

Department of Energy Designates the Idaho National Laboratory...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Designates the Idaho National Laboratory Advanced Test Reactor as a National Scientific User Facility Department of Energy Designates the Idaho National Laboratory Advanced Test...

358

Trace Metals in Oil Laboratory Proficiency Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Trace Metals in Oil. Soybean oil sample to test for Iron, Copper, and Nickel using AOCS Official method Ca 18-79. Trace Metals in Oil Laboratory Proficiency Program Laboratory Proficiency Program (LPP) aocs applicants

359

Railcar waste transfer system hydrostatic test report  

SciTech Connect

This Acceptance Test Report (ATR) documents for record purposes the field results, acceptance, and approvals of the completed acceptance test per HNF-SD-W417-ATP-001, ''Rail car Waste Transfer System Hydrostatic Test''. The test was completed and approved without any problems or exceptions.

Ellingson, S.D.

1997-04-03T23:59:59.000Z

360

Department of Energy Laboratory Accreditation Program Administration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE-STD-1111-2013 July 2013 DOE STANDARD DEPARTMENT OF ENERGY LABORATORY ACCREDITATION PROGRAM ADMINISTRATION U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1111-2013 This document is available on the Department of Energy Office of Health, Safety and Security Approved DOE Technical Standards Web Site at www.hss.energy.gov/nuclearsafety/ns/techstds/ ii DOE-STD-1111-2013 FOREWORD The Department of Energy (DOE) implemented the DOE Laboratory Accreditation Program (DOELAP) for external dosimetry in 1987 and for radiobioassay in 1998. DOELAP strives to maintain and improve the competency of dose measurement laboratories through performance

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

USGv6 Testing Program  

Science Conference Proceedings (OSTI)

... their own list of tested products accessible ... items arising include soliciting test laboratories and ... participate in the USGv6 testing program, soliciting ...

2013-06-02T23:59:59.000Z

362

Lawrence Livermore National Laboratory (LLNL) Experimental Test Site (Site 300) Salinity Evaluation and Minimization Plan for Cooling Towers and Mechanical Equipment Discharges  

SciTech Connect

This document was created to comply with the Central Valley Regional Water Quality Control Board (CVRWQCB) Waste Discharge Requirement (Order No. 98-148). This order established new requirements to assess the effect of and effort required to reduce salts in process water discharged to the subsurface. This includes the review of technical, operational, and management options available to reduce total dissolved solids (TDS) concentrations in cooling tower and mechanical equipment water discharges at Lawrence Livermore National Laboratory's (LLNL's) Experimental Test Site (Site 300) facility. It was observed that for the six cooling towers currently in operation, the total volume of groundwater used as make up water is about 27 gallons per minute and the discharge to the subsurface via percolation pits is 13 gallons per minute. The extracted groundwater has a TDS concentration of 700 mg/L. The cooling tower discharge concentrations range from 700 to 1,400 mg/L. There is also a small volume of mechanical equipment effluent being discharged to percolation pits, with a TDS range from 400 to 3,300 mg/L. The cooling towers and mechanical equipment are maintained and operated in a satisfactory manner. No major leaks were identified. Currently, there are no re-use options being employed. Several approaches known to reduce the blow down flow rate and/or TDS concentration being discharged to the percolation pits and septic systems were reviewed for technical feasibility and cost efficiency. These options range from efforts as simple as eliminating leaks to implementing advanced and innovative treatment methods. The various options considered, and their anticipated effect on water consumption, discharge volumes, and reduced concentrations are listed and compared in this report. Based on the assessment, it was recommended that there is enough variability in equipment usage, chemistry, flow rate, and discharge configurations that each discharge location at Site 300 should be considered separately when deciding on an approach for reducing the salt discharge to the subsurface. The smaller units may justify moderate changes to equipment, and may benefit from increased cleaning frequencies, more accurate and suitable chemical treatment, and sources of make up water and discharge re-use. The larger cooling towers would be more suitable for automated systems where they don't already exist, re-circulation and treatment of blow down water, and enhanced chemical dosing strategies. It may be more technically feasible and cost efficient for the smaller cooling towers to be replaced by closed loop dry coolers or hybrid towers. There are several potential steps that could be taken at each location to reduce the TDS concentration and/or water use. These include: sump water filtration, minimization of drift, accurate chemical dosing, and use of scale and corrosion coupons for chemical calibration. The implementation of some of these options could be achieved by a step-wise approach taken at two representative facilities. Once viable prototype systems have been proven in the field, systematic implementation should proceed for the remaining systems, with cost, desired reduction, and general feasibility taken into consideration for such systems.

Daily III, W D

2010-02-24T23:59:59.000Z

363

High temperature testing of the EDCON borehole gravity housing system conducted at Los Alamos National Laboratories, January 12-18, 1986  

DOE Green Energy (OSTI)

A series of tests were conducted on the EDCON borehole gravity meter (BHGM) high temperature sonde. The tests were conducted to determine the suitability of this sonde for logging operations in the Department of Energy Salton Trough test well. 1 ref., 3 figs., 4 tabs.

Not Available

1986-01-01T23:59:59.000Z

364

Form Approval: OMB No. 1905-0129  

U.S. Energy Information Administration (EIA) Indexed Site

Due Date: 2013 Due Date: 2013 Form Approval: OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden hours: 0.75 SCHEDULE 1. IDENTIFICATION Contact Information Form EIA-861S ANNUAL ELECTRIC POWER INDUSTRY REPORT (Short Form) NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provisions on sanctions and the provisions concerning the confidentiality of information in the instructions. Title 18 U.S.C. 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. Entities that report using the Form EIA-861 do

365

DOE Approved Technical Standards | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Technical Standards Program » DOE DOE Technical Standards Program » DOE Approved Technical Standards DOE Approved Technical Standards Document ID Filter Document ID sort ascending Title Date DOE-STD-7501-99 The DOE Corporate Lessons Learned Programs Superseding DOE-STD-7501-95 Including Change Notice No. 1 (September 1997) This technical standard provides management expectations and a framework for the DOE Corporate Lessons Learned Program. The framework is intended to support development and implementation of a DOE-wide lessons learned infrastructure 01/20/2000 DOE-STD-6005-01 Industrial Hygiene Practices This standard recommends industrial hygiene practices to support components of the Worker Protection Program required by Department of Energy (DOE) Order 440.1A, “Worker Protection Management for DOE Federal and Contractor Employees. 04/30/2001

366

Approval of the Critical Decision 4.  

Office of Legacy Management (LM)

SUBJECT: ACTION: Approval of the Critical Decision 4 for the Closeout SUBJECT: ACTION: Approval of the Critical Decision 4 for the Closeout of the General Atomics (GA) Hot Cell Facility (HCF) Decontamination and Decommissioning (D&D) Project, Project Baseline Summary VL-GA-0012, and the Transfer for the GA Project Files to the Office of Legacy Management (LM) ISSUE: None BACKGROUND: Activities associated with the cleanup of the GA HCF and surrounding site were completed on September 28,2003. The GA site has been remediated to negotiated cleanup standards and released by the U. S. Nuclear Regulatory Commission (NRC) and the State of California Department of Health Services Radiological Health Branch (CAL-RHB) to unrestricted use. All project generated waste and legacy spent fuel materials have been dispositioned. GAts Special Nuclear

367

DOE Approved Technical Standards | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Information Center » DOE Technical Standards Program » DOE Information Center » DOE Technical Standards Program » DOE Approved Technical Standards DOE Approved Technical Standards Document ID Filter Document ID sort descending Title Date DOE-HDBK-1001-96 Guide to Good Practices for Training and Qualification of Instructors This guide contains good practices for the training and qualification of technical instructors and instructional technologist at DOE reactor and non-reactor nuclear facilities. 05/15/1996 DOE-HDBK-1002-96 Guide to Good Practices for Training and Qualification of Chemical Operators The purpose of the Guide to Good Practices for Training and Qualification of Chemical Operators is to provide contractor training organizations with information that can be used as a reference to refine existing chemical operator training programs, or develop new training programs where no program exists. 05/14/1996

368

Laboratory Access | Sample Preparation Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

Access Access Planning Ahead Planning Ahead Please complete the Beam Time Request (BTR) and Support Request forms thourgh the User Portal. Thorough chemical and sample information must be included in your BTR. Support Request forms include a list of collaborators that require laboratory access and your group's laboratory equipment requests. Researcher safety is taken seriously at SLAC. Please remember that radioactive materials, nanomaterials, and biohazardous materials have additional safety requirements. Refer to the SSRL or LCLS Safety Offices for further guidance. Upon Arrival Upon Arrival Once you arrive you must complete training and access forms before accessing the Sample Preparation Laboratories (SPL). All Sample Prep Lab doors are locked with access key codes. Once your SPL

369

Critical Decision 4 (CD-4) Approval Template | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 (CD-4) Approval Template Critical Decision 4 (CD-4) Approval Template ExampleCD-4Template02-14-12.docx More Documents & Publications Critical Decision 2 (CD-2...

370

Critical Decision 2 (CD-2) Approval Template | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 (CD-2) Approval Template Critical Decision 2 (CD-2) Approval Template ExampleCD-2Template02-14-12.docx More Documents & Publications Critical Decision 4 (CD-4...

371

Form Approved Through 9/30/2007 OMB No. 0925-0001 Department of Health and Human Services  

E-Print Network (OSTI)

Form Approved Through 9/30/2007 OMB No. 0925-0001 Department of Health and Human Services Public Health Services Review Group Type Activity Grant Number Total Project Period From: Through: Requested, SERVICE, LABORATORY, OR EQUIVALENT 5. TITLE AND ADDRESS OF ADMINISTRATIVE OFFICIAL 2d. MAJOR SUBDIVISION E

Wisconsin at Madison, University of

372

Form Approved Through 6/30/2012 OMB No. 0925-0001 Department of Health and Human Services  

E-Print Network (OSTI)

Form Approved Through 6/30/2012 OMB No. 0925-0001 Department of Health and Human Services Public Health Services Grant Application Do not exceed character length restrictions indicated. LEAVE BLANK) E-MAIL ADDRESS: 3e. DEPARTMENT, SERVICE, LABORATORY, OR EQUIVALENT 3f. MAJOR SUBDIVISION 3g

Wisconsin at Madison, University of

373

The in-situ decontamination of sand and gravel aquifers by chemically enhanced solubilization of multiple-compound DNAPLs with surfactant solutions: Phase 1 -- Laboratory and pilot field-scale testing and Phase 2 -- Solubilization test and partitioning and interwell tracer tests. Final report  

Science Conference Proceedings (OSTI)

Laboratory, numerical simulation, and field studies have been conducted to assess the potential use of micellar-surfactant solutions to solubilize chlorinated solvents contaminating sand and gravel aquifers. Ninety-nine surfactants were screened for their ability to solubilize trichloroethene (TCE), perchloroethylene (PCE), and carbon tetrachloride (CTET). The field test was conducted in the alluvial aquifer which is located 20 to 30 meters beneath a vapor degreasing operation at Paducah Gaseous Diffusion Plant. This aquifer has become contaminated with TCE due to leakage of perhaps 40,000 liters of TCE, which has generated a plume of dissolved TCE extending throughout an area of approximately 3 km{sup 2} in the aquifer. Most of the TCE is believed to be present in the overlying lacustrine deposits and in the aquifer itself as a dense, non-aqueous phase liquid, or DNAPL. The objective of the field test was to assess the efficacy of the surfactant for in situ TCE solubilization. Although the test demonstrated that sorbitan monooleate was unsuitable as a solubilizer in this aquifer, the single-well test was demonstrated to be a viable method for the in situ testing of surfactants or cosolvents prior to proceeding to full-scale remediation.

NONE

1997-10-24T23:59:59.000Z

374

National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Homesteading on the Pajarito Plateau Homesteading on the Pajarito Plateau topic of inaugural lecture at Los Alamos National Laboratory January 4, 2013 Lecture series begins yearlong commemoration of 70th anniversary LOS ALAMOS, NEW MEXICO, Jan. 3, 2013-In commemoration of its 70th anniversary, Los Alamos National Laboratory kicks off a yearlong lecture series on Wednesday, Jan. 9, at 5:30 p.m. with a presentation about homesteading on the Pajarito Plateau at the Bradbury Science Museum, 1350 Central Avenue, Los Alamos. - 2 - The inaugural lecture is based on a book by local writers Dorothy Hoard, Judy Machen and Ellen McGehee about the area's settlement between 1887 and 1942. On hikes across the Pajarito Plateau, Hoard envisioned the Los Alamos area before modern roads and bridges made transportation much easier. The trails she walked

375

PNNL Laboratory Research Homes Pacific Northwest National Laboratory's Lab Homes  

E-Print Network (OSTI)

PNNL Laboratory Research Homes Pacific Northwest National Laboratory's Lab Homes Residential, or PNNL, has purchased two custom, factory-built, double-wide homes to conduct energy research. These "Lab Homes" are a project test-bed for PNNL and its research partners who aim to achieve highly energy

376

Calibration Laboratories  

Science Conference Proceedings (OSTI)

... flow profile in test piping, personnel effects, and ... pipe vibration effects, and unsteadiness in pipe flow. ... NIST Handbook I SO-2G 38 March 2004 ...

2011-09-21T23:59:59.000Z

377

Laboratory Directed  

NLE Websites -- All DOE Office Websites (Extended Search)

The approach was to design such magnets and test various manufacturing techniques (grinding, EDM, etc.) and check the quality of the resulting field. The resulting field...

378

Department of Energy National Laboratories  

Idaho National Laboratory SLAC National Accelerator Laboratory Department of Energy National Laboratories. Laboratory or Facility Website ...

379

Renewable Energy Approvals (Ontario, Canada) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Renewable Energy Approvals (Ontario, Canada) Renewable Energy Approvals (Ontario, Canada) Renewable Energy Approvals (Ontario, Canada) < Back Eligibility Agricultural Developer Investor-Owned Utility Municipal/Public Utility Rural Electric Cooperative Utility Savings Category Buying & Making Electricity Solar Wind Program Info State Ontario Program Type Siting and Permitting Provider Ontario Ministry of the Environment The Renewable Energy Approvals (REA) regulation creates an approval and review process for all biomass, wind energy, and solar facilities. The Ministry of the Environment inspects, investigates and enforces province-wide to ensure businesses and individuals in Ontario comply with environmental legislation outlined in the Ontario Environmental Protection Act. The regulation outlines siting regulations for all projects.

380

IDAHO NATIONAL LABORATORY  

NLE Websites -- All DOE Office Websites (Extended Search)

History of the Idaho National Laboratory (INL) History of the Idaho National Laboratory (INL) You are here: DOE-ID Home > Inside ID > Brief History Site History The Idaho National Laboratory (INL), an 890-square-mile section of desert in southeast Idaho, was established in 1949 as the National Reactor Testing Station. Initially, the missions at the INL were the development of civilian and defense nuclear reactor technologies and management of spent nuclear fuel. Fifty-two reactors—most of them first-of-a-kind—were built, including the Navy’s first prototype nuclear propulsion plant. Of the 52 reactors, three remain in operation at the site. In 1951, the INL achieved one of the most significant scientific accomplishments of the century—the first use of nuclear fission to produce a usable quantity of electricity at the Experimental Breeder Reactor No.

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Order Module--DOE-STD-1104-2009, REVIEW AND APPROVAL OF NUCLEAR FACILITY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-1104-2009, REVIEW AND APPROVAL OF NUCLEAR DOE-STD-1104-2009, REVIEW AND APPROVAL OF NUCLEAR FACILITY SAFETY BASIS AND SAFETY DESIGN BASIS DOCUMENTS Order Module--DOE-STD-1104-2009, REVIEW AND APPROVAL OF NUCLEAR FACILITY SAFETY BASIS AND SAFETY DESIGN BASIS DOCUMENTS The familiar level of this module is divided into two sections that are intended to provide only an overview of the material contained in DOE-STD-1104-2009, which should be consulted for complete information. The first section covers the introduction, applicability, and chapters 1 and 2. The second section covers chapters 3, 4, and 5. We have provided examples throughout the module to help familiarize you with the material. The examples will also help prepare you for the practice at the end of this module and for the criterion test.

382

Virtual Laboratories  

E-Print Network (OSTI)

At the frontier of most areas in science, computer simulations play a central role. The traditional division of natural science into experimental and theoretical investigations is now completely outdated. Instead, theory, simulation, and experimentation form three equally essential aspects, each with its own unique flavor and challenges. Yet, education in computational science is still lagging far behind, and the number of text books in this area is minuscule compared to the many text books on theoretical and experimental science. As a result, many researchers still carry out simulations in a haphazard way, without properly setting up the computational equivalent of a well equipped laboratory. The art of creating such a virtual laboratory, while providing proper extensibility and documentation, is still in its infancy. A new approach is described here, Open Knowledge, as an extension of the notion of Open Source software. Besides open source code, manuals, and primers, an open knowledge project provides simulated dialogues between code developers, thus sharing not only the code, but also the motivations behind the code.

Piet Hut

2006-10-07T23:59:59.000Z

383

NREL Launches Collaborative Resource for Field Test Best Practices (Fact Sheet), NREL Highlights, Research & Development, NREL (National Renewable Energy Laboratory)  

NLE Websites -- All DOE Office Websites (Extended Search)

Dynamic portal documents and shares state-of-the-art Dynamic portal documents and shares state-of-the-art residential field test tools and techniques. Field testing is a science and an art-a tricky process that develops through a lot of trial and error. Researchers in the Advanced Residential Buildings group at the National Renewable Energy Labora- tory (NREL) regularly conduct field experiments and long-term monitoring in occupied and unoc- cupied houses throughout the United States. The goal is to capture real-world performance of energy- efficient systems, in support of the U.S. Department of Energy's Build- ing America program. In addition to the technical challenges of making accurate field measurements, NREL researchers realized another problem: the vast body of field test know-how based on years of collective experience is currently scattered throughout the

384

Tallow and Grease Laboratory Proficiency Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Tallow and Grease samples to determine Free Fatty Acids, Insoluble Impurities, Refined and Bleached Color and Unsaponifiable Matter. Tallow and Grease Laboratory Proficiency Program Laboratory Proficiency Program (LPP)

385

trans Fatty Acid Content Laboratory Proficiency Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for trans fatty acid content. Samples include non-hydrogenated Soybean Oil and hydrogenated Soybean Oil. trans Fatty Acid Content Laboratory Proficiency Program Laboratory Proficiency Program (LPP) aocs applicants certifie

386

Thomas Wallner | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Argonne National Laboratory's Omnivorous Engine Argonne National Laboratory's Omnivorous Engine Argonne National Laboratory's Omnivorous Engine Argonne National Laboratory's Omnivorous Engine Browse by Topic Energy Energy efficiency Vehicles Alternative fuels Automotive engineering Biofuels Diesel Fuel economy Fuel injection Heavy-duty vehicles Hybrid & electric vehicles Hydrogen & fuel cells Internal combustion Powertrain research Vehicle testing Building design Manufacturing Energy sources Renewable energy Bioenergy Solar energy Wind energy Fossil fuels Oil Nuclear energy Nuclear energy modeling & simulation Nuclear fuel cycle Geology & disposal Reactors Nuclear reactor safety Nuclear reactor materials Energy usage Energy life-cycle analysis Energy storage Batteries Lithium-ion batteries Lithium-air batteries Smart Grid

387

DOE Approved Technical Standards | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Technical Standards Program » DOE DOE Technical Standards Program » DOE Approved Technical Standards DOE Approved Technical Standards Document ID Filter Document ID Title Date sort descending DOE-HDBK-1010-92 DOE Fundamentals Handbook, Classical Physics Reaffirmed 1999 The handbook includes information on the units used to measure physical properties; vectors, and how they are used to show the net effect of various forces; Newton's Laws of motion, and how to use these laws in force and motion applications; and the concepts of energy, work, and power, and how to measure and calculate the energy involved in various applications 09/27/1995 DOE-HDBK-1078-94 Training Program Handbook: A Systematic Approach to Training Reaffirmed 1999 | Supercedes DOE-STD-0102T, TAP-2 This Handbook contains a narrative discussion on the various phases of the systematic approach to training process. The phases can be modified and incorporated as appropriate when developing detailed local procedures. Each phase is organized such that the major steps necessary to adequately complete it are clear. 10/25/1995

388

Personal Body Armor Testing  

Science Conference Proceedings (OSTI)

Directory of Accredited Laboratories. Personal Body Armor Testing. In 2006, the US Department of Justice (DOJ) National ...

2014-01-03T23:59:59.000Z

389

Cryptographic and Security Testing  

Science Conference Proceedings (OSTI)

Directory of Accredited Laboratories. Cryptographic and Security Testing. ... TX. atsec information security corporation, Austin, TX [200658- 0] VA. ...

2013-12-27T23:59:59.000Z

390

Hydromechanical modeling of pulse tests that measure both fluidpressure and fracture-normal displacement of the Coaraze Laboratory site,France  

Science Conference Proceedings (OSTI)

In situ fracture mechanical deformation and fluid flowinteractions are investigated through a series of hydraulic pulseinjection tests, using specialized borehole equipment that cansimultaneously measure fluid pressure and fracture displacements. Thetests were conducted in two horizontal boreholes spaced one meter apartvertically and intersecting a near-vertical highly permeable faultlocated within a shallow fractured carbonate rock. The field data wereevaluated by conducting a series of coupled hydromechanical numericalanalyses, using both distinct-element and finite-element modelingtechniques and both two- and three-dimensional model representations thatcan incorporate various complexities in fracture network geometry. Oneunique feature of these pulse injection experiments is that the entiretest cycle, both the initial pressure increase and subsequent pressurefall-off, is carefully monitored and used for the evaluation of the insitu hydromechanical behavior. Field test data are evaluated by plottingfracture normal displacement as a function of fluid pressure, measured atthe same borehole. The resulting normal displacement-versus-pressurecurves show a characteristic loop, in which the paths for loading(pressure increase) and unloading (pressure decrease) are different. Bymatching this characteristic loop behavior, the fracture normal stiffnessand an equivalent stiffness (Young's modulus) of the surrounding rockmass can be back-calculated. Evaluation of the field tests by couplednumerical hydromechanical modeling shows that initial fracture hydraulicaperture and normal stiffness vary by a factor of 2 to 3 for the twomonitoring points within the same fracture plane. Moreover, the analysesshow that hydraulic aperture and the normal stiffness of the pulse-testedfracture, the stiffness of surrounding rock matrix, and the propertiesand geometry of the surrounding fracture network significantly affectcoupled hydromechanical responses during the pulse injection test. Morespecifically, the pressure-increase path of the normaldisplacement-versus-pressure curve is highly dependent on thehydromechanical parameters of the tested fracture and the stiffness ofthe matrix near the injection point, whereas the pressure-decrease pathis highly influenced by mechanical processes within a larger portion ofthe surrounding fractured rock.

Cappa, F.; Guglielmi, Y.; Rutqvist, J.; Tsang, C-F.; Thoraval, A.

2006-04-22T23:59:59.000Z

391

Infrared Thermography Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Scientists measuring sample at IR Thermography lab Scientists measuring sample at IR Thermography lab Infrared Thermography Laboratory In the Infrared Thermography Laboratory (IRLab), researchers test the thermal performance of windows and other insulated systems. Test specimens are placed between chambers that simulate different climate conditions, including household room temperature versus extreme winter cold with high exterior wind speed. Using an infrared imaging system, the IRLab produces calibrated quantitative thermal images, or surface temperature maps, of the specimens in heat transfer experiments. This high resolution non-contact surface temperature data help researchers understand details of thermal performance and validate computer simulations of heat and fluid flow, as well as provide a powerful visualization of detailed thermal features in

392

Brookhaven National Laboratory Industrial Hygiene Group Environment, Safety, Health Directorate  

E-Print Network (OSTI)

Safety & Health Services Division Industrial Hygiene Laboratory/ HEPA Filter Surveillance TestingBrookhaven National Laboratory Industrial Hygiene Group Environment, Safety, Health Directorate

Homes, Christopher C.

393

Laboratory Activities  

Science Conference Proceedings (OSTI)

This chapter summarizes the laboratory activities performed by PNNLs Vadose Zone Characterization Project in support of the Tank Farm Vadose Zone Program, led by CH2M HILL Hanford Group, Inc. The results of these studies are contained in numerous reports (Lindenmeier et al. 2002; Serne et al. 2002a, 2002b, 2002c, 2002d, 2002e; Lindenmeier et al. 2003; Serne et al. 2004a, 2004b; Brown et al. 2005, 2006a, 2007; Serne et al. 2007) and have generated much of the data reported in Chapter 22 (Geochemistry-Contaminant Movement), Appendix G (Geochemistry-Contaminant Movement), and Cantrell et al. (2007, SST WMA Geochemistry Data Package in preparation). Sediment samples and characterization results from PNNLs Vadose Zone Characterization Project are also shared with other science and technology (S&T) research projects, such as those summarized in Chapter 12 (Associated Science Activities).

Brown, Christopher F.; Serne, R. Jeffrey

2008-01-17T23:59:59.000Z

394

Service Center Contacts (listed by College) * Please note that the Service Centers listed may contain both approved C&G use rates and  

E-Print Network (OSTI)

. Anti-microbial Test Facility and Medical Textiles Laboratory. 4. New atmospheric plasma research lab

395

Princeton Plasma Physics Laboratory:  

SciTech Connect

This paper discusses progress on experiments at the Princeton Plasma Physics Laboratory. The projects and areas discussed are: Principal Parameters Achieved in Experimental Devices, Tokamak Fusion Test Reactor, Princeton Large Torus, Princeton Beta Experiment, S-1 Spheromak, Current-Drive Experiment, X-ray Laser Studies, Theoretical Division, Tokamak Modeling, Spacecraft Glow Experiment, Compact Ignition Tokamak, Engineering Department, Project Planning and Safety Office, Quality Assurance and Reliability, and Administrative Operations.

Phillips, C.A. (ed.)

1986-01-01T23:59:59.000Z

396

Optical Characterization Laboratory (Fact Sheet)  

DOE Green Energy (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Optical Characterization Laboratory at the Energy Systems Integration Facility. The Optical Characterization Laboratory at NREL's Energy Systems Integration Facility (ESIF) conducts optical characterization of large solar concentration devices. Concentration solar power (CSP) mirror panels and concentrating solar systems are tested with an emphasis is on measurement of parabolic trough mirror panels. The Optical Characterization Laboratory provides state-of-the-art characterization and testing capabilities for assessing the optical surface quality and optical performance for various CSP technologies including parabolic troughs, linear Fresnel, dishes, and heliostats.

Not Available

2011-10-01T23:59:59.000Z

397

Test of electron beam technology on Savannah River Laboratory low-activity aqueous waste for destruction of benzene, benzene derivatives, and bacteria  

Science Conference Proceedings (OSTI)

High energy radiation was studied as a means for destroying hazardous organic chemical wastes. Tests were conducted at bench scale with a {sup 60}Co source, and at full scale (387 l/min) with a 1.5 MV electron beam source. Bench scale tests for both benzene and phenol included 32 permutations of water quality factors. For some water qualities, as much as 99.99% of benzene or 90% of phenol were removed by 775 krads of {sup 60}Co irradiation. Full scale testing for destruction of benzene in a simulated waste-water mix showed loss of 97% of benzene following an 800 krad dose and 88% following a 500 krad dose. At these loss rates, approximately 5 Mrad of electron beam irradiation is required to reduce concentrations from 100 g/l to drinking water quality (5 {mu}g/l). Since many waste streams are also inhabited by bacterial populations which may affect filtering operations, the effect of irradiation on those populations was also studied. {sup 60}Co and electron beam irradiation were both lethal to the bacteria studied at irradiation levels far lower than were necessary to remove organic contaminants.

Dougal, R.A. [Univ. of South Carolina, Columbia, SC (United States). Dept. of Electrical and Computer Engineering

1993-08-01T23:59:59.000Z

398

USDA Forest Products Laboratory | Open Energy Information  

Open Energy Info (EERE)

Forest Products Laboratory Forest Products Laboratory Jump to: navigation, search Name USDA Forest Products Laboratory Place Madison, WI Website http://www.fpl.fs.fed.us/ References USDA Forest Products Laboratory [1] Information About Partnership with NREL Partnership with NREL Yes Partnership Type Test & Evaluation Partner Partnering Center within NREL Electricity Resources & Building Systems Integration LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! USDA Forest Products Laboratory is a company located in Madison, WI. References ↑ "USDA Forest Products Laboratory" Retrieved from "http://en.openei.org/w/index.php?title=USDA_Forest_Products_Laboratory&oldid=381741" Categories: Clean Energy Organizations Companies Organizations

399

NREL: Wind Research - Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Testing Photo of a large wind turbine blade sticking out of the structural testing laboratory; it is perpendicular to a building at the National Wind Technology Center. A...

400

Energy Storage Laboratory (Fact Sheet)  

DOE Green Energy (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Energy Storage Laboratory at the Energy Systems Integration Facility. At NREL's Energy Storage Laboratory in the Energy Systems Integration Facility (ESIF), research focuses on the integration of energy storage systems (both stationary and vehicle-mounted) and interconnection with the utility grid. Focusing on battery technologies, but also hosting ultra-capacitors and other electrical energy storage technologies, the laboratory will provide all resources necessary to develop, test, and prove energy storage system performance and compatibility with distributed energy systems. The laboratory will also provide robust vehicle testing capability, including a drive-in environmental chamber, which can accommodate commercial-sized hybrid, electric, biodiesel, ethanol, compressed natural gas, and hydrogen fueled vehicles. The Energy Storage Laboratory is designed to ensure personnel and equipment safety when testing hazardous battery systems or other energy storage technologies. Closely coupled with the research electrical distribution bus at ESIF, the Energy Storage Laboratory will offer megawatt-scale power testing capability as well as advanced hardware-in-the-loop and model-in-the-loop simulation capabilities. Some application scenarios are: The following types of tests - Performance, Efficiency, Safety, Model validation, and Long duration reliability. (2) Performed on the following equipment types - (a) Vehicle batteries (both charging and discharging V2G); (b) Stationary batteries; (c) power conversion equipment for energy storage; (d) ultra- and super-capacitor systems; and (e) DC systems, such as commercial microgrids.

Not Available

2011-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Strategic Laboratory Leadership Program | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Erik Gottschalk (F); Devin Hodge (A); Jeff Chamberlain (A); Brad Ullrick (A); Bill Rainey (J). Image courtesy of Argonne National Laboratory. Strategic Laboratory Leadership...

402

Idaho Public Utilities Commission Approves Neal Hot Springs Power Purchase  

Open Energy Info (EERE)

Idaho Public Utilities Commission Approves Neal Hot Springs Power Purchase Idaho Public Utilities Commission Approves Neal Hot Springs Power Purchase Agreement Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Idaho Public Utilities Commission Approves Neal Hot Springs Power Purchase Agreement Abstract N/A Author U.S. Geothermal Inc. Published Publisher Not Provided, 2010 Report Number N/A DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Idaho Public Utilities Commission Approves Neal Hot Springs Power Purchase Agreement Citation U.S. Geothermal Inc.. 2010. Idaho Public Utilities Commission Approves Neal Hot Springs Power Purchase Agreement. Boise Idaho: (!) . Report No.: N/A. Retrieved from "http://en.openei.org/w/index.php?title=Idaho_Public_Utilities_Commission_Approves_Neal_Hot_Springs_Power_Purchase_Agreement&oldid=682748"

403

Materials Reliability Program: Laboratory Testing to Determine Resistance of Alloys 690/52/152 to Stress Corrosion Crack Growth in S imulated Primary Water - An Update (MRP-253)  

Science Conference Proceedings (OSTI)

In recent years, primary water stress corrosion cracking (PWSCC) has led to increased costs for repair and replacement of thick-walled, pressurized water reactor (PWR) components made of Alloy 600 and its weld metals. Thick-section Alloy 690 welded material is now being widely used, particularly for nozzle penetrations during the replacement of reactor pressure vessel (RPV) heads and during repairs to other components in the primary system. Much testing has been carried out on thick-wall Alloy 690 and it...

2008-12-10T23:59:59.000Z

404

Approving and Issuing DOE Technical Standards, TSPP-6  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6-2013 6-2013 DOE TECHNICAL STANDARDS September 2013 PROGRAM PROCEDURES APPROVING AND ISSUING DOE TECHNICAL STANDARDS U.S. Department of Energy Office of Nuclear Safety Washington, D.C. 2058 DOE-TSPP-6-2013 Approving and Issuing September 2013 DOE Technical Standards Program CONTENTS 1. SCOPE ............................................................................................................................................ 1 1.1 Purpose .......................................................................................................................1 1.2 Applicability .................................................................................................................1 2. APPROVING AND ISSUING DOE TECHNICAL STANDARDS ................................................... 1

405

NREL: Concentrating Solar Power Research - Laboratory Capabilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratory Capabilities Laboratory Capabilities To research, develop, and test a variety of concentrating solar power technologies, NREL features the following laboratory capabilities: High-Flux Solar Furnace (HFSF) Large Payload Solar Tracker Advanced Optical Materials Laboratory Advanced Thermal Storage Materials Laboratory Optical Testing Laboratory and Beam Characterization System Receiver Test Laboratory Heat Collection Element (HCE) Temperature Survey Photo of NREL's High-Flux Solar Furnace. NREL's High-Flux Solar Furnace. High-Flux Solar Furnace (HFSF) The power generated at NREL's High-Flux Solar Furnace (HFSF) can be used to expose, test, and evaluate many components-such as receivers, collectors, and reflector materials-used in concentrating solar power systems. The 10-kilowatt HFSF consists of a tracking heliostat and 25 hexagonal

406

Heat Transfer Laboratory of the Savannah River Laboratory  

SciTech Connect

The Heat Transfer Laboratory, recently- constructed adjacent to the main Savannah River Laboratory building, was designed to mock up nuclear heating and cooling of reactor components under a variety- of conditions. Nuclear heating is simulated by electrical resistance heating of test sections with a 3 MW directcurrent power supply. Cooling is provided by water. Three test stations (A, B, and C) are available for testing full-size fuel assemblies, measuring flow instabilities, and for measuring burnout heat fluxes. Safeguards provided in the design of the facility and conservative operating procedures minimize or elimnate potential hazards. (auth)

Knoebel, D.H.; Harris, S.D.

1973-10-01T23:59:59.000Z

407

APS Experiment Safety Approval System Instructions for Users  

NLE Websites -- All DOE Office Websites (Extended Search)

form and Experiment Hazard Control Plan? Part VII: What If... APS Experiment Safety Approval System Instructions for Users version 2.0 January 21, 2005 Contacts...

408

Professional Preface, 4 (1): TMS Approves Five Chapters as Joint ...  

Science Conference Proceedings (OSTI)

At the October 9, 1996, meeting of the TMS Board of Directors, five student chapters were approved as Joint ASM/TMS Student Chapters. They are: University of...

409

President Roosevelt Approves Production of Atomic Bomb | National...  

National Nuclear Security Administration (NNSA)

Approves Production of Atomic Bomb | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency...

410

Approval Process for Dual Compensation Waivers for Reemployed...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DIRECTOR OFFICE 0 UMAN CAPITAL MANAGEMENT SUBJECT: POLICY MEMORANDUM 11: APPROVAL PROCESS FOR DUAL COMPENSATION WAIVERS FOR REEMPLOYED ANNUITANTS Section 1122 of the National...

411

Idaho Public Utilities Commission Approves Neal Hot Springs Power...  

Open Energy Info (EERE)

Number NA DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Idaho Public Utilities Commission Approves Neal Hot Springs Power Purchase...

412

Approval for Use of the Minnesota Multiphasic Personality Inventory...  

NLE Websites -- All DOE Office Websites (Extended Search)

OF HEAL TH, SAFETY AND SECURITY Approval for Use of Minnesota Multiphasic Personality Inventory-2 Revised Format and Psychological Assessment Inventory Under title IO, Code of...

413

Review and Approval of Nuclear Facility Safety Basis Documents...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

institutional programs in Integrated Safety Management System documents and site-wide manuals was added. p. 13 Sect. 3 Approval Bases for Technical Safety Requirements New...

414

GC-12_Reorg_Approval.pdf | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Response to several FOIA requests - Renewable Energy. DOEContractorWorkForceRestructuringApprovalThresholds.pdf Federal Regulations for Natural Gas Imports and Exports...

415

Iodine and NO sub x behavior in the dissolver off-gas and IODOX (Iodine Oxidation) systems in the Oak Ridge National Laboratory Integrated Equipment Test facility  

SciTech Connect

This paper describes the most recent in a series of experiments evaluating the behavior of iodine and NO{sub x} in the Integrated Equipment Test (IET) Dissolver Off-Gas (DOG) System. This work was performed as part of a joint collaborative program between the US Department of Energy and the Power and Nuclear Fuel Development Corporation of Japan. The DOG system consists of two shell-and-tube heat exchangers in which water and nitric acid are removed from the dissolver off-gas by condensation, followed by a packed tower in which NO{sub x} is removed by absorption into a dilute nitric acid solution. The paper also describes the results of the operation of the Iodine Oxidation (IODOX) System. This system serves to remove iodine from the DOG system effluent by absorption into hyperazeotropic nitric acid. 7 refs., 11 figs., 10 tabs.

Birdwell, J.F.

1990-01-01T23:59:59.000Z

416

Battelle Columbus Laboratories Director's Final Findings and Orders, October 4, 1995 Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Battelle Columbus Laboratories Battelle Columbus Laboratories Agreement Name Battelle Columbus Laboratories Director's Final Findings and Orders, October 4, 1995 State Ohio Agreement Type Federal Facility Agreement Legal Driver(s) FFCAct Scope Summary Approve the Compliance Plan Volume of the amended PSTP, hereafter referred to as the "approved STP," and address the generation and treatment of mixed wastes at the Facilities Parties DOE; Ohio Environmental Protection Agency Date 10/4/1995 SCOPE * Approve the Compliance Plan Volume of the amended PSTP, hereafter referred to as the "approved STP." * Address the generation and treatment of all mixed wastes at the Facilities, which are not being accumulated in accordance with the timeframes established in OAC

417

NREL: Vehicle Ancillary Loads Reduction - Laboratory Capabilities  

NLE Websites -- All DOE Office Websites (Extended Search)

VALR Lab. NREL's Vehicle Ancillary Loads Reduction Laboratory houses ADAM, our advanced thermal manikin, as well as a passenger compartment climate simulator, testing equipment...

418

Vehicle Systems Integration Laboratory | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

(VSI) Laboratory offers unique capabilities to test, simulate, and evaluate engines, electric motors, and transmissions in conventional and hybrid powertrain configurations...

419

Brookhaven National Laboratory/ Photon Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Subject: Frequently Asked Questions about Occupational Health and Safety Management System (OHSAS 18001) Number: PS-ESH-0060 Revision: 2 Effective: 6/6/12 Page 1 of 2 The only official copy of this file is the one on-line in the PS website. Before using a printed copy, verify that it is the most current version by checking the document effective date on the PS website Prepared By: L. Stiegler Approved By: A. Ackerman Revision Log Frequently Asked Questions about Occupational Health and Safety Management System (OHSAS 18001) Background: Everyone benefits from having a safe and healthy workplace. Laboratory management is strongly committed to operating BNL in a manner that ensures the health and safety of all personnel, and has

420

ARGONNE NATIONAL LABORATORY is....  

NLE Websites -- All DOE Office Websites (Extended Search)

Scattering June 12-18, 2010 - Argonne National Laboratory June 19-26, 2010 - Oak Ridge National Laboratory Argonne National Laboratory is a U.S. Department of Energy laboratory...

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

State Laboratory Contacts IL  

Science Conference Proceedings (OSTI)

State Laboratory Contact Information IL. Idaho. ... State of Iowa Metrology Laboratory Ellsworth Community College 1100 College Ave. ...

2013-11-07T23:59:59.000Z

422

Sandia National Laboratories: Sandia National Laboratories: Missions:  

NLE Websites -- All DOE Office Websites (Extended Search)

About Nuclear Weapons at Sandia About Nuclear Weapons at Sandia Weapons Researcher World-class scientists and engineers come to Sandia to conduct breakthrough research in nuclear weapons. Sandia designs more than 6,300 parts of a modern nuclear weapon's 6,500 components. Our state-of-the-art laboratories facilitate large-scale testing and computer simulation. Sandia's work is of the highest consequence and those doing the work face awesome responsibilities. Unlike other national labs, which focus on the physics package, Sandia's work is to weaponize the physics package. Sandia must ensure that the other 95% of the weapon's parts work perfectly at every point of contact with the delivery systems. This requires the broadest competencies in engineering, with a deep science foundation. At the core of Sandia's nuclear weapons program is warhead systems

423

Access to High Technology User Facilities at DOE National Laboratories |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Access to High Technology User Facilities at DOE National Access to High Technology User Facilities at DOE National Laboratories Access to High Technology User Facilities at DOE National Laboratories In recognition of the nation's expanding need to engage businesses and universities in the areas of commercial and basic science research, the Department has developed two special types of agreements for use at all DOE National Laboratories with approved designated user facilities. For non-commercial, basic science research, researchers may seek to use the Non-proprietary User Agreement. Under this type of agreement, the user pays its own costs of the research with the DOE laboratory, may access specialized laboratory equipment and collaborate with laboratory scientists. The non-proprietary user and the National Laboratory retain

424

Laboratory tests, statistical analysis and correlations for regained permeability and breakthrough time in unconsolidated sands for improved drill-in fluid cleanup practices  

E-Print Network (OSTI)

Empirical models for estimating the breakthrough time and regained permeability for selected nondamaging drill-in fluids (DIF's) give a clear indication of formation damage and proper cleanup treatments for reservoir conditions analyzed in this study. We determined values of breakthrough time and regained permeability for common polymer-carbonate and sized-salt/saturated brine DIF's for a range at reservoir properties including temperature, drill solids content, and percent of acid in the cleanup treatment. We chose these DIF's because they form tight, thin filtercakes that control fluid leakoff and afford more complete wellbore cleanup properties than standard drilling muds, and we chose reservoir properties that could be varied and measured. Beginning with a large database of 101 tests with 8 independent variables such as type of drill-in fluid, temperature, screen type, presence of gravel pack, formation type, type of drill solids, concentration of drill solids, and cleanup treatments, we analyzed the importance of each variable. After that, we identified the independent variables we were taking into account during this research. Those variables were temperature, drill solids content, and concentration of hydrochloric acid in the cleanup treatment. Then we generated a matrix for each set of experiments that allowed us to organize and measure the conditions we were looking for, regained permeability and breakthrough time. In measuring the regained permeability, we used a linear-flow cell apparatus. In measuring the breakthrough time that particular cleaning procedures take to flow across the filter cake, we used a ceramic disc cell apparatus. We used statistical software to select properties, formation, and diagnostics of the models and to develop relationships among the properties of the DIF's. We developed four new empirical models for estimating the breakthrough time and regained permeability in polymer carbonate and sized salt. High correlations resulted with R values between 0.851 and 0.986 corroborated by close values of adjusted R-square and low P-values give validity to the correlations found. This technique gives a broad overview of the formation damage as well as the proper cleanup treatment for similar conditions presented in the field.

Serrano, Gerardo Enrique

2000-01-01T23:59:59.000Z

425

TEXAS A&M RESEARCH FOUNDATION EMAIL & FAX APPROVAL AUTHORIZATION  

E-Print Network (OSTI)

10-22-09 TEXAS A&M RESEARCH FOUNDATION EMAIL & FAX APPROVAL AUTHORIZATION This form serves as authorization for the Texas A&M Research Foundation to accept approvals for invoices and project payroll expenses by email or fax. I understand that by using this process the Texas A&M Research Foundation

426

TEXAS A&M RESEARCH FOUNDATION FAX & EMAIL APPROVAL AUTHORIZATION  

E-Print Network (OSTI)

TEXAS A&M RESEARCH FOUNDATION FAX & EMAIL APPROVAL AUTHORIZATION This form serves as authorization for the Texas A&M Research Foundation to accept approvals by fax or email for invoices, travel, and/or payroll expenses. I understand that by using this method, the Texas A&M Research Foundation will process payments

427

Waste Feed Delivery Environmental Permits and Approvals Plan  

Science Conference Proceedings (OSTI)

This plan describes the environmental permits approvals, and other requirements that may affect establishment of a waste feed delivery system for the Hanford Site's River Protection Project. This plan identifies and screens environmental standards for potential applicability, outlines alternatives for satisfying applicable standards, and describes preferred permitting and approval approaches.

TOLLEFSON, K.S.

2000-01-18T23:59:59.000Z

428

Attachment G: Guidance on Headquarters Approval of State  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

G: Guidance on Headquarters Approval of State G: Guidance on Headquarters Approval of State Agreements-in-Principle Attachment G: Guidance on Headquarters Approval of State Agreements-in-Principle Guidance on Headquarters Approval of State Agreements-in-Principle Introduction: In December 1993, the Office of Environmental Management (EM) informed states that the Department intended to extend the existing Agreements-in-Principle (AIPs) for another five-year term and would continue to negotiate new AIPs. The purpose of this memorandum is to provide guidance on Headquarters approval of State AIPs in the EM program. This guidance applies to both new and renegotiated AIPs. All Operations and Field Offices are directed to involve appropriate Headquarters organizations early in the negotiations to assure that draft agreements

429

Department of Energy Commends the Nuclear Regulatory Commission's Approval  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commends the Nuclear Regulatory Commission's Commends the Nuclear Regulatory Commission's Approval of a Second Early Site Permit in Just One Month Department of Energy Commends the Nuclear Regulatory Commission's Approval of a Second Early Site Permit in Just One Month March 27, 2007 - 12:10pm Addthis The Entergy Corporation's Grand Gulf Site in Mississippi Receives NRC Approval for an ESP WASHINGTON, DC - The U.S. Department of Energy (DOE) today applauded the Nuclear Regulatory Commission's (NRC) decision to approve an Early Site Permit (ESP) for the Entergy Corporation's Grand Gulf Nuclear Station in Mississippi. This approval, the second ESP this month, demonstrates another major milestone in President Bush's Advanced Energy Initiative, which plans to expand the use of safe and clean nuclear power. Earlier this

430

APPROVAL REQUIRED WHEN EMPLOYEES ENGAGE IN OUTSIDE EMPLOYMENT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

APPROVAL REQUIRED WHEN EMPLOYEES ENGAGE IN OUTSIDE APPROVAL REQUIRED WHEN EMPLOYEES ENGAGE IN OUTSIDE EMPLOYMENT Pursuant to 5 C.F.R. §§ 2635.803 and 3301.103 (a), all Department of Energy employees, other than special Government employees, must obtain prior written approval from their immediate supervisor and an ethics counselor before engaging in outside employment regardless of whether the employee is compensated for the activity. A special Government employee is an employee serving not more than 130 days in any consecutive 365 day period. Each request for approval must include the name of the employee seeking approval, the group or organization for whom the employee seeks to work, the type of work to be performed, and the proposed dates of employment and hours to be worked. These regulations have been in place for several years.

431

Energy Department Approves Gulf Coast Exports of Liquefied Natural Gas |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Approves Gulf Coast Exports of Liquefied Natural Approves Gulf Coast Exports of Liquefied Natural Gas Energy Department Approves Gulf Coast Exports of Liquefied Natural Gas May 20, 2011 - 12:00am Addthis Washington, D.C. - The U.S. Department of Energy today issued a conditional authorization approving an application to export liquefied natural gas (LNG) from the Sabine Pass LNG Terminal in Louisiana, paving the way for thousands of new construction and domestic natural gas production jobs in Louisiana, Texas, and several other states. Subject to final environmental and regulatory approval, Sabine Pass Liquefaction, LLC will retrofit an existing LNG import terminal in Louisiana so that it can also be used for exports. This is the first long-term authorization to export natural gas from the lower 48 states as LNG to all U.S. trading partners.

432

President Roosevelt Approves Production of Atomic Bomb | National Nuclear  

National Nuclear Security Administration (NNSA)

Approves Production of Atomic Bomb | National Nuclear Approves Production of Atomic Bomb | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > About Us > Our History > NNSA Timeline > President Roosevelt Approves Production of Atomic Bomb President Roosevelt Approves Production of Atomic Bomb January 19, 1942 Washington, DC President Roosevelt Approves Production of Atomic Bomb

433

Mobile Energy Laboratory Procedures  

SciTech Connect

Pacific Northwest Laboratory (PNL) has been tasked to plan and implement a framework for measuring and analyzing the efficiency of on-site energy conversion, distribution, and end-use application on federal facilities as part of its overall technical support to the US Department of Energy (DOE) Federal Energy Management Program (FEMP). The Mobile Energy Laboratory (MEL) Procedures establish guidelines for specific activities performed by PNL staff. PNL provided sophisticated energy monitoring, auditing, and analysis equipment for on-site evaluation of energy use efficiency. Specially trained engineers and technicians were provided to conduct tests in a safe and efficient manner with the assistance of host facility staff and contractors. Reports were produced to describe test procedures, results, and suggested courses of action. These reports may be used to justify changes in operating procedures, maintenance efforts, system designs, or energy-using equipment. The MEL capabilities can subsequently be used to assess the results of energy conservation projects. These procedures recognize the need for centralized NM administration, test procedure development, operator training, and technical oversight. This need is evidenced by increasing requests fbr MEL use and the economies available by having trained, full-time MEL operators and near continuous MEL operation. DOE will assign new equipment and upgrade existing equipment as new capabilities are developed. The equipment and trained technicians will be made available to federal agencies that provide funding for the direct costs associated with MEL use.

Armstrong, P.R.; Batishko, C.R.; Dittmer, A.L.; Hadley, D.L.; Stoops, J.L.

1993-09-01T23:59:59.000Z

434

Purdue Hydrogen Systems Laboratory  

DOE Green Energy (OSTI)

The Hydrogen Systems Laboratory in a unique partnership between Purdue University's main campus in West Lafayette and the Calumet campus was established and its capabilities were enhanced towards technology demonstrators. The laboratory engaged in basic research in hydrogen production and storage and initiated engineering systems research with performance goals established as per the USDOE Hydrogen, Fuel Cells, and Infrastructure Technologies Program. In the chemical storage and recycling part of the project, we worked towards maximum recycling yield via novel chemical selection and novel recycling pathways. With the basic potential of a large hydrogen yield from AB, we used it as an example chemical but have also discovered its limitations. Further, we discovered alternate storage chemicals that appear to have advantages over AB. We improved the slurry hydrolysis approach by using advanced slurry/solution mixing techniques. We demonstrated vehicle scale aqueous and non-aqueous slurry reactors to address various engineering issues in on-board chemical hydrogen storage systems. We measured the thermal properties of raw and spent AB. Further, we conducted experiments to determine reaction mechanisms and kinetics of hydrothermolysis in hydride-rich solutions and slurries. We also developed a continuous flow reactor and a laboratory scale fuel cell power generation system. The biological hydrogen production work summarized as Task 4.0 below, included investigating optimal hydrogen production cultures for different substrates, reducing the water content in the substrate, and integrating results from vacuum tube solar collector based pre and post processing tests into an enhanced energy system model. An automated testing device was used to finalize optimal hydrogen production conditions using statistical procedures. A 3 L commercial fermentor (New Brunswick, BioFlo 115) was used to finalize testing of larger samples and to consider issues related to scale up. Efforts continued to explore existing catalytic methods involving nano catalysts for capture of CO2 from the fermentation process.

Jay P Gore; Robert Kramer; Timothee L Pourpoint; P. V. Ramachandran; Arvind Varma; Yuan Zheng

2011-12-28T23:59:59.000Z

435

Record Series Descriptions: Los Alamos National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Los Alamos National Laboratory Los Alamos National Laboratory Project Y (MED Era Director's Office & Lab Management) Records Director's Office & Laboratory Management Files Director's Office & Laboratory Management Files (microfilm) Robert Underhill Files Records of CMB DO (Chemistry-Metallurgy-Baker Division Offices) GMX-5 (Dynamic Weapons Testing Division), RaLa (Radiolanthanum) Groups Test Records Health Division Central Administrative Records H-4 (Bio-Medical Research Subdivision of Health Division) Central Administrative Records Bio-Medical Research Group, Wright Langham Papers Records of J-Division (Weapons Testing), Central Administrative Files Records of N-Division (Nuclear Rocket Propulsion Division), Rover Program Central Administrative Files Medium Energy Physics Division, Central File Records

436

TEST TEST TEST  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NNSA/EA-1375 NNSA/EA-1375 Environmental Assessment for Construction and Operation of a New Office Building and Related Structures within TA-3 at Los Alamos National Laboratory, Los Alamos, New Mexico July 26, 2001 Department of Energy National Nuclear Security Administration Los Alamos Area Office Environmental Assessment for Proposed Construction and Operation of a New Office Building and Related Structures NNSA/LAAO July 26,, 2001 iii Contents Acronyms and Terms .................................................................................................................. vi Executive Summary ..................................................................................................................... ix 1.0 Purpose and Need

437

Department of Energy Laboratory Accreditation for External Dosimetry  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-1095-2011 January 2011 DOE STANDARD DEPARTMENT OF ENERGY LABORATORY ACCREDITATION FOR EXTERNAL DOSIMETRY U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. ii DOE-STD-1095-2011 This document is available on the Department of Energy Office of Health, Safety and Security Approved DOE Technical Standards Web Site at www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE-STD-1095-2011 iii FOREWORD The Department of Energy (DOE) implemented the DOE Laboratory Accreditation Program (DOELAP) for external dosimetry in 1987. The radiobioassay portion of DOELAP is described in standard DOE-STD-1112-98, Department of Energy Laboratory Accreditation Program for

438

Lab obtains approval to begin design on new radioactive waste staging  

NLE Websites -- All DOE Office Websites (Extended Search)

New radioactive waste staging facility New radioactive waste staging facility Lab obtains approval to begin design on new radioactive waste staging facility The 4-acre complex will include multiple staging buildings plus an operations center and a concrete pad for mobile waste characterization equipment. September 1, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy

439

Virtual Cement and Concrete Testing Laboratory  

Science Conference Proceedings (OSTI)

... Substantial savings in time, materials (purchase and disposal), human resources, and money can be achieved by reducing the number of physical ...

2012-11-02T23:59:59.000Z

440

Accelerated Laboratory Testing of PV Polymers using ...  

Science Conference Proceedings (OSTI)

... More district lamellar structures observed on the exposed samples indicate ... 85C, 85% RH (Damp Heat) 3. NIST SPHERE: UV, 55C, 0% RH ...

2013-11-15T23:59:59.000Z

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

The Virtual Cement and Concrete Testing Laboratory ...  

Science Conference Proceedings (OSTI)

... Mitigation of early age cracking in high volume fly ash concrete Mitigation of early age-cracking in high volume fly ash concrete ...

2010-11-12T23:59:59.000Z

442

The Virtual Cement and Concrete Testing Laboratory ...  

Science Conference Proceedings (OSTI)

... and Microstructure Development Modelling Package. ... Year 2. The model operates according ... similar to CEMHYD3D (agent-based reaction/diffusion ...

2003-08-28T23:59:59.000Z

443

Brookhaven National Laboratory | Accelerator Test Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

for medical applications (Figure 1-49). Figure 1-49. Replacing gantry- type ion beam manipulator with a compact laser driven ion accelerator may enable compact and inexpensive...

444

Laboratory Equipment & Supplies | Sample Preparation Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

Equipment & Supplies Equipment & Supplies John Bargar, SSRL Scientist Equipment is available to serve disciplines from biology to material science. All laboratories contain the following standard laboratory equipment: pH meters with standard buffers, analytical balances, microcentrifuges, vortex mixers, ultrasonic cleaning baths, magnetic stirrers, hot plates, and glassware. Most laboratories offer ice machines and cold rooms. Specialty storage areas for samples include a -80 freezer, argon and nitrogen glove boxes, radiation contamination areas, inert atmosphere chambers, and cold rooms. For specific information please see: Equipment Inventory Checkout Equipment & Supplies To view equipment inventory by laboratory, refer to the following pages: Biology Chemistry & Material Science Laboratory 1 Inventory

445

Energy Storage Laboratory (Fact Sheet)  

SciTech Connect

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Energy Storage Laboratory at the Energy Systems Integration Facility. At NREL's Energy Storage Laboratory in the Energy Systems Integration Facility (ESIF), research focuses on the integration of energy storage systems (both stationary and vehicle-mounted) and interconnection with the utility grid. Focusing on battery technologies, but also hosting ultra-capacitors and other electrical energy storage technologies, the laboratory will provide all resources necessary to develop, test, and prove energy storage system performance and compatibility with distributed energy systems. The laboratory will also provide robust vehicle testing capability, including a drive-in environmental chamber, which can accommodate commercial-sized hybrid, electric, biodiesel, ethanol, compressed natural gas, and hydrogen fueled vehicles. The Energy Storage Laboratory is designed to ensure personnel and equipment safety when testing hazardous battery systems or other energy storage technologies. Closely coupled with the research electrical distribution bus at ESIF, the Energy Storage Laboratory will offer megawatt-scale power testing capability as well as advanced hardware-in-the-loop and model-in-the-loop simulation capabilities. Some application scenarios are: The following types of tests - Performance, Efficiency, Safety, Model validation, and Long duration reliability. (2) Performed on the following equipment types - (a) Vehicle batteries (both charging and discharging V2G); (b) Stationary batteries; (c) power conversion equipment for energy storage; (d) ultra- and super-capacitor systems; and (e) DC systems, such as commercial microgrids.

2011-10-01T23:59:59.000Z

446

Project plan for the decontamination and decommissioning of the Argonne National Laboratory Experimental Boiling Water Reactor  

SciTech Connect

In 1956, the Experimental Boiling Water Reactor (EBWR) Facility was first operated at Argonne National Laboratory (ANL) as a test reactor to demonstrate the feasibility of operating an integrated power plant using a direct cycle boiling water reactor as a heat source. In 1967, ANL permanently shut down the EBWR and placed it in dry lay-up. This project plan presents the schedule and organization for the decontamination and decommissioning of the EBWR Facility which will allow it to be reused by other ANL scientific research programs. The project total estimated cost is $14.3M and is projected to generate 22,000 cubic feet of low-level radioactive waste which will be disposed of at an approved DOE burial ground. 18 figs., 3 tabs.

Boing, L.E.

1989-12-01T23:59:59.000Z

447

BATT Fabrication Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Scientist working in battery lab BATT Fabrication Laboratory The BATT Fab Lab (Batteries for Advanced Transportation Technologies Fabrication Laboratory) conducts battery cell...

448

BROOKHAVEN NATIONAL LABORATORY - Energy  

Laboratory Plan FY 2010-2019 June2,2010 BROOKHAVEN NATIONAL LABORATORY Accelerating Innovation Alane for Hydrogen Storage and Delivery June 2012

449

ARM - Laboratory Partners  

NLE Websites -- All DOE Office Websites (Extended Search)

Archive Data Management Facility Data Quality Program Engineering Support External Data Center Laboratory Partners Nine DOE national laboratories share the responsibility of...

450

Sandia National Laboratories: Locations  

NLE Websites -- All DOE Office Websites (Extended Search)

around the world. Sandia's executive management offices and larger laboratory complex are located in Albuquerque, New Mexico. Our second principal laboratory is located...

451

EML: Environmental Measurements Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Security and Privacy Notices History of the Environmental Measurements Laboratory The Manhattan ProjectAtomic Energy Commission (1942 1975) Our Laboratory traces its roots...

452

Lawrence Livermore National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Lawrence Livermore National Laboratory Lawrence Livermore National Laboratorys (LLNL) primary mission is research and development in support of national security. As a...

453

New Brunswick Laboratory - Reports  

NLE Websites -- All DOE Office Websites (Extended Search)

Reports New Brunswick Laboratory Activity Reports 2012 Operational Awareness Oversight of the New Brunswick Laboratory, July 2012 Activity Reports 2011 Orientation Visit to the New...

454

Approval Memorandum, Additional Qualification Courses of Fire - December  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Approval Memorandum, Additional Qualification Courses of Fire - Approval Memorandum, Additional Qualification Courses of Fire - December 13, 2011 Approval Memorandum, Additional Qualification Courses of Fire - December 13, 2011 December 13, 2011 Request approval of revised courses of fire. As indicated in the background section of the memorandum, subjects: Newly Developed SECURITY Policy Officer/Special Response Team Qualification Courses of Fire, dated October 12,2011, members of the Department of Energy (DOE) Firearms Policy Panel, DOE Training Managers Working Group, the National Nuclear Security Administration, and the DOE National Training Center have devloped , reviewed and revised the following courses of fire (attached) for inclusion in the Protective Force Firearms Qualification Courses Manual. The courses of fire pertain to the incubent Security Police

455

Notice of OMB Action Approving DOE Submission to Extend Information  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OMB Action Approving DOE Submission to Extend Information OMB Action Approving DOE Submission to Extend Information Collection Request Title: OE Recovery Act Financial Assistance Grants Notice of OMB Action Approving DOE Submission to Extend Information Collection Request Title: OE Recovery Act Financial Assistance Grants The Office of Management and Budget (OMB) has issued a Notice of OMB Action approving the Department of Energy's request to extend for three years the Information Collection Request Title: OE Recovery Act Financial Assistance Grants, OMB Control No. 1910-5149 that DOE is developing for submission to OMB pursuant to the Paperwork Reduction Act of 1995. Supporting documentation for the request was submitted in September and October, 2011. Comments were due on or before November 7, 2011. ICR Supporting Statement (PDF). OMB Form 83-I (PDF). SGIG Reporting Guidance

456

Energy Praises the Nuclear Regulatory Commission Approval of the First  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Praises the Nuclear Regulatory Commission Approval of the Praises the Nuclear Regulatory Commission Approval of the First United States Nuclear Plant Site in Over 30 Years Energy Praises the Nuclear Regulatory Commission Approval of the First United States Nuclear Plant Site in Over 30 Years March 8, 2007 - 10:28am Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today commended the Nuclear Regulatory Commission's decision to approve the first-ever Early Site Permit (ESP) for the Exelon Generation Company's Clinton site, in central Illinois. This decision marks a major milestone in the President's plan to expand the use of safe and clean nuclear power. As part of President Bush's Advanced Energy Initiative - which seeks to change the way we power this nation - nuclear power will play an increasingly

457

BLM Approves Salt Wells Geothermal Energy Projects | Open Energy  

Open Energy Info (EERE)

Energy Projects Energy Projects Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: BLM Approves Salt Wells Geothermal Energy Projects Abstract Abstract unavailable. Author Colleen Sievers Published U.S. Department of the Interior- Bureau of Land Management, Carson City Field Office, Nevada, 09/28/2011 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for BLM Approves Salt Wells Geothermal Energy Projects Citation Colleen Sievers. BLM Approves Salt Wells Geothermal Energy Projects [Internet]. 09/28/2011. Carson City, NV. U.S. Department of the Interior- Bureau of Land Management, Carson City Field Office, Nevada. [updated 2011/09/28;cited 2013/08/21]. Available from: http://www.blm.gov/nv/st/en/fo/carson_city_field/blm_information/newsroom/2011/september/blm_approves_salt.html

458

Global Nuclear Energy Partnership Steering Group Members Approve  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Global Nuclear Energy Partnership Steering Group Members Approve Global Nuclear Energy Partnership Steering Group Members Approve Transformation to the International Framework for Nuclear Energy Cooperation Global Nuclear Energy Partnership Steering Group Members Approve Transformation to the International Framework for Nuclear Energy Cooperation June 21, 2010 - 11:59am Addthis The Global Nuclear Energy Partnership Steering Group met in Accra, Ghana on June 16-17, 2010, and approved unanimously several transformative changes to reflect global developments that have occurred since the Partnership was established in 2007. The transformation includes a new name - the International Framework for Nuclear Energy Cooperation -- and the establishment of a new Statement of Mission. Participants in this new International Framework agreed that this

459

ISA Approves Standard for Wireless Automation in Process Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications September 22, 2009 - 1:28pm Addthis September 22, 2009 On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. The standard is intended to provide secure, reliable wireless operation for monitoring, alerting, and control applications. It enables robustness with non-ISA-compliant legacy wireless systems, coexistence and interoperability with other wireless devices, and robustness in harsh industrial

460

Chemical Management (Volume 3 of 3), Approval Memorandum  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TO: April 5, 2005 EH-52:Dan Marsick:3-3954 APPROVAL OF DEPARTMENT OF ENERGY (DOE) CHEMICAL MANAGEMENT HANDBOOK VOLUME 3 Dennis Kubicki, EH-24 This memorandum forwards the...

Note: This page contains sample records for the topic "approved testing laboratories" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Office of Science Approves Critical Decision 1 for APS Upgrade...  

NLE Websites -- All DOE Office Websites (Extended Search)

2008 | 2007 | 2006 | 2005 2004 | 2003 | 2002 | 2001 2000 Subscribe to APS News rss feed Office of Science Approves Critical Decision 1 for APS Upgrade Project SEPTEMBER 15, 2011...

462

Headquarters Security Operations Facility Clearance and Approval Program  

Energy.gov (U.S. Department of Energy (DOE))

The Headquarters Facility Clearance and Approval Program (FCAP) is established by DOE Order to administratively determine that a facility is or is not eligible to access, receive, produce, use, and...

463

Retinal prosthesis LLNL helped develop is approved by the FDA  

NLE Websites -- All DOE Office Websites (Extended Search)

6 For immediate release: 02152013 | NR-13-02-06 Retinal prosthesis LLNL helped develop is approved by the FDA Donald B Johnston, LLNL, (925) 423-4902, johnston19@llnl.gov...

464

Bodman Statement On Senate Approval of ANWR Provisions | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bodman Statement On Senate Approval of ANWR Provisions Bodman Statement On Senate Approval of ANWR Provisions Bodman Statement On Senate Approval of ANWR Provisions March 16, 2005 - 10:50am Addthis Washington, DC - Energy Secretary Samuel W. Bodman released the following statement today regarding Senate approval of ANWR provisions in the budget resolution: "The Senate's vote today to clear the way for environmentally responsible oil and gas exploration in a small portion of ANWR is a victory for American consumers, America's economy and America's energy security. "Alaska's frozen tundra has the potential to yield billions of barrels of domestically produced oil. Not only could these resources have a meaningful impact on our dependence on imported sources of oil; this means American jobs producing American oil for Americans.

465

New Accreditation Program for Body Armor Testing ...  

Science Conference Proceedings (OSTI)

New Accreditation Program for Body Armor Testing Laboratories. From NIST Tech Beat: December 12, 2007. ...

2012-04-06T23:59:59.000Z

466

International Services, Human Resources, Brookhaven National Laboratory,  

NLE Websites -- All DOE Office Websites (Extended Search)

H1B Status H1B Status Definition: H-1B classification applies to persons in a specialty occupation which requires the theoretical and practical application of a body of highly specialized knowledge requiring completion of a specific course of higher education. This classification requires a labor attestation issued by the Secretary of Labor. This classification also applies to Government-to-Government research and development, or production projects administered by the Department of Defense. The Petition In order to be considered as a nonimmigrant under the above H1B classification Brookhaven National Laboratory must file Form I-129, Petition for Nonimmigrant Worker, with the United States Citizenship and Immigration Services (USCIS) in the Department of Homeland Security. Once approved, Brookhaven sends a notice of approval, Form I-797. It should be noted that the approval of a petition shall not guarantee visa issuance to an applicant found to be ineligible under provisions of the Immigration and Nationality Act. The petition and the visa are two separate items and controlled by two separate agencies. The visa process while in consultation with USCIS, is controlled by the United States Department of State.

467

Air quality investigations of the Sandia National Laboratories Sol se Mete Aerial Cable Facility  

Science Conference Proceedings (OSTI)

The air quality implications of the test and evaluation activities at the Sandia National Laboratories Sol se Mete Aerial Cable Facility are examined. All facets of the activity that affect air quality are considered. Air contaminants produced directly include exhaust products of rocket motors used to accelerate test articles, dust and gas from chemical explosives, and exhaust gases from electricity generators in the test arenas. Air contaminants produced indirectly include fugitive dust and exhaust contaminants from vehicles used to transport personnel and material to the test area, and effluents produced by equipment used to heat the project buildings. Both the ongoing program and the proposed changes in the program are considered. Using a reliable estimate of th maximum annual testing level, the quantities of contaminants released by project activities ar computed either from known characteristics of test items or from EPA-approved emission factors Atmospheric concentrations of air contaminants are predicted using EPA dispersion models. The predicted quantities and concentrations are evaluated in relation to Federal, New Mexico, an Bernalillo County air quality regulations and the human health and safety standards of the American Conference of Governmental Industrial Hygienists.

Gutman, W.M.; Silver, R.J. [New Mexico State Univ., Las Cruces, NM (United States). Physical Science Lab.

1994-12-01T23:59:59.000Z

468

GRR/Elements/18-CA-c.15 - Does the DTSC Approve the Application...  

Open Energy Info (EERE)

- Does the DTSC Approve the Application DTSC approves or denies the Hazardous Waste Facility Permit Application. Retrieved from "http:en.openei.orgw...

469

Electrical Characterization Laboratory (Fact Sheet), NREL (National Renewable Energy Laboratory), Energy Systems Integration Facility (ESIF)  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrical Characterization Electrical Characterization Laboratory may include: * Equipment manufacturers * Universities * Other National laboratories Contact Us If you are interested in working with NREL's Energy Systems Integration Laboratory, please contact: ESIF Manager Carolyn Elam Carolyn.Elam@nrel.gov 303-275-4311 Electrical Characterization Laboratory Electrical Characterization Laboratory at NREL's Energy Systems Integration Facility (ESIF) focuses on the detailed electrical characterization of components and systems. This laboratory allows researchers to test the ability of equipment to withstand high voltage surges and high current faults, including equipment using

470

Oak Ridge National Laboratory - Laboratory Directed Research...  

NLE Websites -- All DOE Office Websites (Extended Search)

Seed Money Fund Overview The Seed Money Fund of the ORNL LDRD program supports innovative ideas that have the potential of enhancing the Laboratory's core scientific and technical...

471

About Berkeley Lab: Laboratory Director, Associate Laboratory...  

NLE Websites -- All DOE Office Websites (Extended Search)

2009, replacing former laboratory Director Steve Chu, who was sworn in as U.S. Energy Secretary. Before becoming interim director, Alivisatos was the deputy director of Berkeley...

472

Sandia National Laboratories: Research: Laboratory Directed Research...  

NLE Websites -- All DOE Office Websites (Extended Search)

Encouraging creative research to innovate solutions for our nation's greatest challenges. National laboratories have been entrusted with the role of serving as incubators for...

473

Annual Report Alfvn Laboratory  

E-Print Network (OSTI)

is plasma research using small-scale laboratory experiments, where low-density plasmas are generated

Haviland, David

474

National Renewable Energy Laboratory  

E-Print Network (OSTI)

National Renewable Energy Laboratory Innovation for Our Energy Future ponsorship Format Reversed Color:White rtical Format Reversed-A ertical Format Reversed-B National Renewable Energy Laboratory National Renewable Energy Laboratory Innovation for Our Energy Future National Renewable Energy Laboratory

475

Laboratory Management (Quality) Systems  

Science Conference Proceedings (OSTI)

Laboratory Management (Quality) Systems. NISTIR 7028 Type Evaluation Quality Manual Template. This NISTIR has been ...

2012-05-02T23:59:59.000Z

476

State Laboratory Contacts AC  

Science Conference Proceedings (OSTI)

State Laboratory Contact Information AC. Alabama. Mailing Address, ... PDF. Alaska. Mailing Address, Contact Information. Alaska ...

2013-08-01T23:59:59.000Z

477

Nuclear Magnetic Resonance Laboratory  

Science Conference Proceedings (OSTI)

Nuclear Magnetic Resonance Laboratory. ... A 600 MHz Nuclear Magnetic Resonance Spectrometer. Analytical Data Compilation Reference Materials. ...

2012-10-01T23:59:59.000Z

478

Brookhaven National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Directorate Directorate Subject: Controlled Access to the VUV Ring Number: LS-ESH-0013 Revision: D Effective: 5/17/2012 Page 1 of 8 M. Buckley B. Chmiel E. Zitvogel Prepared By: Approved By: Approved By: *Approval signatures on file with master copy. Revision Log 1.0 PURPOSE Controlled access to the NSLS VUV ring is necessary for maintaining personnel safety and stability to the accelerator beam and equipment. 2.0 SCOPE The NSLS VUV ring area is a controlled area that has several personnel hazards. These hazards primarily consist of radiation and electrical. All persons entering the VUV ring need to be aware of these hazards prior to entry. Personnel requiring access to the VUV Ring during non-maintenance periods must follow the Controlled Access requirements within this procedure. Controlled access is the monitoring and

479

Brookhaven National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Building 725 Fire Hazard Analysis/Fire Hazard Assessment Number: LS-ESH-0068 Revision: 1 Effective: 7/15/2009 Page 1 of 18 Prepared By: Robert Chmiel Approved By: Andrew Ackerman Approved By: Joe Levesque *Approval signatures on file with master copy. Revision Log Purpose/Scope The purpose of this Assessment is to comprehensively and qualitatively assess the risk from fire within the National Synchrotron Light Source (NSLS) to ensure DOE fire safety objectives are met. DOE fire protection criteria are outlined in DOE Order 420.1. The Fire Protection Assessment includes identifying the risks from fire and related hazards (direct flame impingement, hot gases, smoke migration, fire-fighting water damage, etc.). A Fire Hazard

480

Brookhaven National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

NSLS User Access Procedures NSLS User Access Procedures Number: LS-UA-0002 Revision: D Effective: 8-24-2009 Page 1 of 23 Prepared By: Kathleen Nasta Approved By: Chi-Chang Kao Approved By: *Approval signatures on file with master copy. 1. Modes of Access 1.1 General Users (GUs) Much of the research performed at the NSLS is conducted by general users who are scientists interested in using the NSLS for experimental programs under the General User Program. All facility beamlines at the NSLS reserve at least 50% of their available beam time for general users and PRT beamlines reserve at least 25% of their available beam time for general users. Requests for beam time at the NSLS are made by submi