National Library of Energy BETA

Sample records for approved program ap

  1. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Approved Program Proposals (AP) Approved Program Proposals (AP) Print Thursday, 13 May 2010 11:53 An Approved Program (AP) enables an investigator, or a group of investigators, to receive a set percentage of beam time to partner with ALS staff both to carry out an extended research program and to develop new tools and/or new research protocols that will be made available to the general user population. APs are arranged for a period of up to three years. AP Proposal Submission Deadlines January

  2. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Approved Program Proposals (AP) Print An Approved Program (AP) enables an investigator, or a group of investigators, to receive a set percentage of beam time to partner with ALS staff both to carry out an extended research program and to develop new tools and/or new research protocols that will be made available to the general user population. APs are arranged for a period of up to three years. AP Proposal Submission Deadlines January 15 July 15 AP Proposal Submission Guidelines Step 1: Contact

  3. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Approved Program Proposals (AP) Print An Approved Program (AP) enables an investigator, or a group of investigators, to receive a set percentage of beam time to partner with ALS staff both to carry out an extended research program and to develop new tools and/or new research protocols that will be made available to the general user population. APs are arranged for a period of up to three years. AP Proposal Submission Deadlines January 15 July 15 AP Proposal Submission Guidelines Step 1: Contact

  4. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Approved Program Proposals (AP) Print An Approved Program (AP) enables an investigator, or a group of investigators, to receive a set percentage of beam time to partner with ALS staff both to carry out an extended research program and to develop new tools and/or new research protocols that will be made available to the general user population. APs are arranged for a period of up to three years. AP Proposal Submission Deadlines January 15 July 15 AP Proposal Submission Guidelines Step 1: Contact

  5. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Approved Program Proposals (AP) Print An Approved Program (AP) enables an investigator, or a group of investigators, to receive a set percentage of beam time to partner with ALS staff both to carry out an extended research program and to develop new tools and/or new research protocols that will be made available to the general user population. APs are arranged for a period of up to three years. AP Proposal Submission Deadlines January 15 July 15 AP Proposal Submission Guidelines Step 1: Contact

  6. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Approved Program Proposals (AP) Print An Approved Program (AP) enables an investigator, or a group of investigators, to receive a set percentage of beam time to partner with ALS staff both to carry out an extended research program and to develop new tools and/or new research protocols that will be made available to the general user population. APs are arranged for a period of up to three years. AP Proposal Submission Deadlines January 15 July 15 AP Proposal Submission Guidelines Step 1: Contact

  7. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    its recommendations to the ALS Division Director. A letter will be sent to the PIs of successful proposals specifying the percentage of beam time and the period of the AP. The...

  8. APS- Renewable Energy Incentive Program

    Broader source: Energy.gov [DOE]

    Through the Renewable Incentive Program, Arizona Public Service (APS) offers customers who install solar water heating systems the opportunity to sell the renewable energy credits (RECs) associat...

  9. APS- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    APS customers may also sign up for a $99 home checkup (a $400 value) to have specially trained contractors identify energy savings upgrades.  Visit the program website for specific details and...

  10. Notification of General User Proposal and Approved Program Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Notification of General User Proposal and Approved Program Results Notification of General User Proposal and Approved Program Results Print by Sue Bailey, User Services Group...

  11. Headquarters Security Operations Facility Clearance and Approval Program

    Broader source: Energy.gov [DOE]

    The Headquarters Facility Clearance and Approval Program (FCAP) is established by DOE Order to administratively determine that a facility is or is not eligible to access, receive, produce, use, and...

  12. Results from the NRC AP600 testing program at the Oregon State University APEX facility

    SciTech Connect (OSTI)

    Reyes, J.N. Jr.; Bessette, D.E.; DiMarzo, M.

    1996-03-01

    The Department of Nuclear Engineering at Oregon State University (OSU) is performing a series of confirmatory tests for the U.S. Nuclear Regulatory Commission. These tests are being conducted in the Advanced Plant Experiment (APEX) facility which is a 1/4 length scale and 1/192 volume scale integral system simulation of the Westinghouse Advanced Passive 600 MWe (AP600) plant. The purpose of the testing program is to examine AP600 passive safety system performance, particularly during long term cooling. Thus far, OSU has successfully performed ten integral system tests for the NRC. This paper presents a description of the APEX facility and summarizes the important results of the NRC test program at OSU.

  13. OMB Approval No. 0348-0041 BUDGET INFORMATION - Construction Programs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OMB Approval No. 0348-0041 BUDGET INFORMATION - Construction Programs NOTE: Certain Federal assistance programs require additional computations to arrive at the Federal share of project costs eligible for participation. If such is the case, you will be notified. COST CLASSIFICATION a. Total Cost b. Costs Not Allowable for Participation c. Total Allowable Costs (Columns a-b) 1 Administrative and legal expenses $0.00 $0.00 $0.00 2 Land, structures, rights-of-way, appraisals, etc. $0.00 $0.00

  14. MA AP MA MA MA AP AP MA MA MA AP AP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP MA MA MA AP AP MA MA MA AP AP low low low AP MA Run PAMM AP Low alpha University Holidays APPAMM Spear Down Hrs S 30 31 S 30 5260 832 6092 2013 2014 Scheduled Hours Users...

  15. AP R

    Office of Legacy Management (LM)

    . aw wL2--\ AP R 2 2 i386 NE-23 Elimination of the Chupadera Mesa and Los Alamos County Industrial Waste Line Sites from Further Consideration for FUSRAP Inclusion Carlos E. Garcia, Director Environmental Safety and Health Division Albuquerque Operations Office The enclosed material is being provided to you to document the final actiors taken under the Department's Formerly Utilized Sites Remedial Action Program (FUSRAP) for the Chupadera Kesa area and the Los Alamos County Industrial Waste

  16. Approval memorandum for DOE participation in Voluntary Protection Programs Participants' Association (VPPPA)

    Broader source: Energy.gov [DOE]

    The Office of Safety and Quality Assurance (EH-30) is requesting approval for DOE membership in the VPPPA. Attached is the Secretary's authorization of the DOE Voluntary Protection Program (DOE-VPP).

  17. APS Science 2009.

    SciTech Connect (OSTI)

    Gibson, J. M; Mills, D. M.; Gerig, R.

    2010-05-01

    It is my pleasure to introduce the 2009 annual report of the Advanced Photon Source. This was a very good year for us. We operated with high reliability and availability, despite growing problems with obsolete systems, and our users produced a record output of publications. The number of user experiments increased by 14% from 2008 to more than 3600. We congratulate the recipients of the 2009 Nobel Prize in Chemistry-Venkatraman Ramakrishnan (Cambridge Institute for Medical Research), Thomas Steitz (Yale University), and Ada Yonath (Weizmann Institute) - who did a substantial amount of this work at APS beamlines. Thanks to the efforts of our users and staff, and the ongoing counsel of the APS Scientific Advisory Committee, we made major progress in advancing our planning for the upgrade of the APS (APS-U), producing a proposal that was positively reviewed. We hope to get formal approval in 2010 to begin the upgrade. With advocacy from our users and the support of our sponsor, the Office of Basic Energy Sciences in the Department of Energy (DOE) Office of Science, our operating budgets have grown to the level needed to more adequately staff our beamlines. We were also extremely fortunate to have received $7.9 M in American Recovery and Reinvestment Act ('stimulus') funding to acquire new detectors and improve several of our beamlines. The success of the new Linac Coherent Light Source at Stanford, the world's first x-ray free-electron laser, made us particularly proud since the undulators were designed and built by the APS. Among other highlights, we note that more than one-quarter of the 46 Energy Frontier Research Centers, funded competitively across the U.S. in 2009 by the DOE, included the Advanced Photon Source in their proposed work, which shows that synchrotron radiation, and the APS in particular, are central to energy research. While APS research covers everything from fundamental to applied science (reflected by the highlights in this report), the challenge

  18. MA AP MA MA MA AP AP MA MA MA AP AP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP MA MA MA AP AP MA MA MA AP AP low low low AP MA Run PAMM / AP Low alpha University Holidays AP/PAMM Spear Down Hrs S 30 31 S 30 5260 832 6092 2013 2014 Scheduled Hours Users Total 29 31 30 29 31 30 F 31 28 29 30 T 31 28 27 29 28 30 30 27 29 W 30 29 26 29 27 31 28 AP T 29 26 29 27 AP PAMM 30 28 25 31 28 26 30 27 30 28 26 M 28 25 29 27 24 30 27 25 29 26 S 27 24 28 26 23 27 29 26 24 28 25 S 26 23 28 26 24 23 27 25 28 28 25 25 22 27 24 25 23 F 25 26 24 21 27 24 22 26 23 22 27 T 24 21 20 24 22 21

  19. Approved reference and testing materials for use in Nuclear Waste Management Research and Development Programs

    SciTech Connect (OSTI)

    Mellinger, G.B.; Daniel, J.L.

    1984-12-01

    This document, addressed to members of the waste management research and development community summarizes reference and testing materials available from the Nuclear Waste Materials Characterization Center (MCC). These materials are furnished under the MCC's charter to distribute reference materials essential for quantitative evaluation of nuclear waste package materials under development in the US. Reference materials with known behavior in various standard waste management related tests are needed to ensure that individual testing programs are correctly performing those tests. Approved testing materials are provided to assist the projects in assembling materials data base of defensible accuracy and precision. This is the second issue of this publication. Eight new Approved Testing Materials are listed, and Spent Fuel is included as a separate section of Standard Materials because of its increasing importance as a potential repository storage form. A summary of current characterization information is provided for each material listed. Future issues will provide updates of the characterization status of the materials presented in this issue, and information about new standard materials as they are acquired. 7 references, 1 figure, 19 tables.

  20. Better Buildings Neighborhood Program Workforce/Business Partners Peer Exchange Call: Approaches to Approved Contractor Lists, Call Slides and Summary, April 25, 2013

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    25, 2013 Better Buildings Neighborhood Program Workforce/Business Partners Peer Exchange Call: Approaches to Approved Contractor Lists Call Slides and Summary Agenda - Approaches to Approved Contractor Lists * Call Logistics and Attendance  Roll call: Name, Program, and What would you like to get out of today's call? * Discussion  What experiences have you had with using approved contractor lists?  What processes and/or criteria have you used to match customers with contractors using

  1. APS User Operations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schedules APS Schedule Useful Links Beamline Design Library (former Design Exchange) Machine Status Link Bunch Clock Information APS Systems Status Storage Ring Operating Status...

  2. APS and Frontiers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the annual publication of Argonne research highlights. This page contains Frontiers articles focusing on APS-related research. APS Articles in Frontiers 2004 Cover of Frontiers...

  3. WPN 04-3: DOE-Approved Energy Audits for the Weatherization Assistance Program

    Broader source: Energy.gov [DOE]

    To inform the network which states have had their energy audit procedures and priority lists re-approved by DOE as required every five years.

  4. WPN 03-4: DOE-Approved Energy Audits for the Weatherization Assistance Program

    Broader source: Energy.gov [DOE]

    To inform the network which states have had their energy audit procedures and priority lists re-approved by DOE as required every five years.

  5. WPN 05-5: DOE-Approved Energy Audits for the Weatherization Assistance Program

    Broader source: Energy.gov [DOE]

    To inform the network which states have had their energy audit procedures and priority lists re-approved by the U.S. Department of Energy (DOE) as required every five years.

  6. APS and Logos

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Logos A quarterly magazine about Argonne research. The Argonne Logos articles in this section focus on APS-related research. APS Articles in Logos 2003 Cover of Logos Summer 2003...

  7. Directory of Certificates of Compliance for radioactive materials packages: Report of NRC approved quality assurance programs for radioactive materials packages. Volume 3, Revision 15

    SciTech Connect (OSTI)

    1995-10-01

    The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volumes 1 and 2. An alphabetical listing by user name is included in the back of Volume 3 of approved QA programs. The reports include a listing of all users of each package design and approved QA programs prior to the publication date.

  8. Global Green Energy ApS | Open Energy Information

    Open Energy Info (EERE)

    ApS Jump to: navigation, search Name: Global Green Energy ApS Place: Aarhus C, Denmark Zip: DK- 8000 Sector: Wind energy Product: Wind farm project developer. References: Global...

  9. Waste Shipment Approval - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About Us Hanford Site Wide Programs Hanford Site Solid Waste Acceptance Program Acceptance Process Waste Shipment Approval About Us Hanford Site Solid Waste Acceptance Program What's New Acceptance Criteria Acceptance Process Becoming a new Hanford Customer Annual Waste Forecast and Funding Arrangements Waste Stream Approval Waste Shipment Approval Waste Receipt Quality Assurance Program Waste Specification Records Tools Points of Contact Waste Shipment Approval Email Email Page | Print Print

  10. Waste Stream Approval - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stream Approval About Us Hanford Site Solid Waste Acceptance Program What's New Acceptance Criteria Acceptance Process Becoming a new Hanford Customer Annual Waste Forecast and Funding Arrangements Waste Stream Approval Waste Shipment Approval Waste Receipt Quality Assurance Program Waste Specification Records Tools Points of Contact Waste Stream Approval Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size After funding approval is in place, the next step is to

  11. APS 2007 Conferences

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Accelerator Conference (APAC 2007) (Jan. 29-Feb. 2) Indore, India APS Upgrade ERL Optics Workshop (April 23) Argonne National Laboratory, Argonne, IL Synchrotron Radiation...

  12. APS 1995 Conferences

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conferences & Workshops This section tracks conferences and workshops of interest to the APS researcher community. Synchrotron Radiation Instrumentation '95 (Oct. 17-20) A...

  13. APS 1999 Conferences

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of interest to the APS researcher community. Workshop on Scientific Applications of the LCLS. (Jan. 12-14) Stanford Synchrotron Radiation Laboratory (SSLC) Stanford, CA Workshop on...

  14. MA MA AP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MA AP low low low MA Run PAMM / AP Low alpha University Holidays AP/PAMM Spear Down Oct Nov S Apr May Jun Jul Aug Sep 7/17/2015 SPEAR OPERATING SCHEDULE 2015-2016 2015 2016 Oct Nov Dec Jan Feb Mar S 1 1 2 1 4 1 M 2 1 2 1 T 3 1 3 PAMM 1 2 2 3 6 3 W 4 2 3 AP AP 5 2 1 3 2 4 F 2 6 4 1 5 2 4 3 T 1 5 3 5 2 7 4 3 1 5 4 1 6 4 1 5 8 5 S 4 8 2 6 3 2 7 4 2 6 5 S 3 7 6 5 3 7 6 3 8 6 3 7 4 8 7 M 5 9 7 4 9 10 7 AP PAMM PAMM PAMM PAMM 4 8 5 4 9 6 8 AP 5 9 6 5 AP 10 7 5 9 AP 8 6 10 9 13 W 7 11 9 11 T 6 10 8 12

  15. APS- Multifamily Energy Efficiency Program

    Broader source: Energy.gov [DOE]

    In order to meet Arizona's 22% energy reduction by 2020 goal, APS offers energy efficiency incentives to multifamily building residents. CFLs, thermostat shut-offs and water controls are offered...

  16. APS - Solutions for Business Financing | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Equipment Program Info Sector Name Utility Administrator National Bank of Arizona Website http:www.aps.commainservicesSolutionsForBusinessfinancing.html Funding...

  17. APS Science 2006.

    SciTech Connect (OSTI)

    Gibson, J. M.; Fenner, R. B.; Long, G.; Borland, M.; Decker, G.

    2007-05-24

    In my five years as the Director of the Advanced Photon Source (APS), I have been fortunate to see major growth in the scientific impact from the APS. This year I am particularly enthusiastic about prospects for our longer-term future. Every scientific instrument must remain at the cutting edge to flourish. Our plans for the next generation of APS--an APS upgrade--got seriously in gear this year with strong encouragement from our users and sponsors. The most promising avenue that has emerged is the energy-recovery linac (ERL) (see article on page xx), for which we are beginning serious R&D. The ERL{at}APS would offer revolutionary performance, especially for x-ray imaging and ultrafast science, while not seriously disrupting the existing user base. I am very proud of our accelerator physics and engineering staff, who not only keep the current APS at the forefront, but were able to greatly impress our international Machine Advisory Committee with the quality of their work on the possible upgrade option (see page xx). As we prepare for long-term major upgrades, our plans to develop and optimize all the sectors at APS in the near future are advancing. Several new beamlines saw first light this year, including a dedicated powder diffraction beamline (11-BM), two instruments for inelastic x-ray scattering at sector 30, and the Center for Nanoscale Materials (CNM) Nanoprobe beamline at sector 26. Our partnership in the first x-ray free-electron laser (LCLS) to be built at Stanford contributes to revolutionary growth in ultrafast science (see page xx), and we are developing a pulse chirping scheme to get ps pulses at sector 7 of the APS within a year or so. In this report, you will find selected highlights of scientific research at the APS from calendar year 2006. The highlighted work covers diverse disciplines, from fundamental to applied science. In the article on page xx you can see the direct impact of APS research on technology. Several new products have emerged from

  18. APS Storage Ring Parameters

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    next up previous Next: Main Parameters APS Storage Ring Parameters M. Borland, G. Decker, L. Emery, W. Guo, K. Harkay, V. Sajaev, C.-Y. Yao Advanced Photon Source September 8, 2010...

  19. AP Declaration Helper : Home

    National Nuclear Security Administration (NNSA)

    Announcements: Get Help with the IAEA Additional Protocol Because you are reading this web page, there is a good chance that you already know about the Additional Protocol (AP)...

  20. Approaches to Approved Contractor Lists

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program Workforce / Business Partners Peer Exchange Call: Approaches to Approved Contractor Lists, Call Slides and Summary, April 25, 2013. This workforce/business partners peer exchange call discussed approaches to approved contractor lists.

  1. Mission | APS Engineering Support Division

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mission, the APS Engineering Support Division provides: Highly reliable, state-of-the-art computer infrastructure to meet the needs of the APS. Leading-edge information...

  2. ARM - Instrument - aps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govInstrumentsaps Documentation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Aerodynamic Particle Sizer (APS) Instrument Categories Aerosols

  3. APS Science 2007.

    SciTech Connect (OSTI)

    Not Available

    2008-05-30

    This report provides research highlights from the Advanced Photon Source (APS). Although these highlights represent less than 10% of the published work from the APS in 2007, they give a flavor of the diversity and impact of user research at the facility. In the strategic planning the aim is to foster the growth of existing user communities and foresee new areas of research. This coming year finds the APS engaged in putting together, along with the users, a blueprint for the next five years, and making the case for a set of prioritized investments in beamlines, the accelerator, and infrastructure, each of which will be transformational in terms of scientific impact. As this is written plans are being formulated for an important user workshop on October 20-21, 2008, to prioritize strategic plans. The fruit from past investments can be seen in this report. Examples include the creation of a dedicated beamline for x-ray photon correlation spectroscopy at Sector 8, the evolution of dedicated high-energy x-ray scattering beamlines at sectors 1 and 11, a dedicated imaging beamline at Sector 32, and new beamlines for inelastic scattering and powder diffraction. A single-pulse facility has been built in collaboration with Sector 14 (BioCARS) and Phil Anfinrud at the National Institutes of Health, which will offer exceptionally high flux for single-pulse diffraction. The nanoprobe at Sector 26, built and operated jointly by the Argonne Center for Nanoscale Materials and the X-ray Operations and Research (XOR) section of the APS X-ray Science Division, has come on line to define the state of the art in nanoscience.

  4. APS Today: Calendar of Events

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    aps.anl.govNewsAPSToday Upcoming events at the Advanced Photon Source at Argonne National Laboratory. en-us Argonne National Laboratory http:www.aps.anl.govImages...

  5. APS User News | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News & Calendars Users Home APS User News User Announcements Proposal Deadlines and Related Meetings Conferences and Workshops APS Seminars and Meetings APS Committees and Reviews...

  6. Tank 241-AP-107, grab samples 7AP-97-1, 7AP-97-2 and 7AP-97-3 analytical results for the final report

    SciTech Connect (OSTI)

    Steen, F.H.

    1997-12-22

    This document is the final report for tank 241-AP-107 grab samples. Three grab samples were collected from riser 1 on September 11, 1997. Analyses were performed on samples 7AP-97-1, 7AP-97-2 and 7AP-97-3 in accordance with the Compatibility Grab Sampling and Analysis Plan (TSAP) (Sasaki, 1997) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO) (Rev. 1: Fowler, 1995; Rev. 2: Mulkey and Nuier, 1997). The analytical results are presented in the data summary report (Table 1). A notification was made to East Tank Farms Operations concerning low hydroxide in the tank and a hydroxide (caustic) demand analysis was requested. The request for sample analysis (RSA) (Attachment 2) received for AP-107 indicated that the samples were polychlorinated biphenyl (PCB) suspects. Therefore, prior to performing the requested analyses, aliquots were made to perform PCB analysis in accordance with the 222-S Laboratory administrative procedure, LAP-101-100. The results of this analysis indicated that no PCBs were present at 50 ppm and analysis proceeded as non-PCB samples. The results and raw data for the PCB analysis will be included in a revision to this document. The sample breakdown diagrams (Attachment 1) are provided as a cross-reference for relating the tank farm customer identification numbers with the 222-S Laboratory sample numbers and the portion of sample analyzed.

  7. ap | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ap | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency...

  8. APS Science | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science APS Science features articles on Advanced Photon Source research and engineering highlights that are written for the interested public as well as the synchrotron x-ray,...

  9. NASA @ APS | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NASA @ APS NASA engineers developing rocket propulsion hardware 1 of 8 NASA engineers developing rocket propulsion hardware Patrick McManamen, a propulsion system engineer at NASA, ...

  10. Aps_notify Info Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Apsnotify -- APS Operations Event Notification List About Apsnotify English (USA) This list alerts subscribers to major events that may happen during operations at the Advanced...

  11. APS User News, Issue 88

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    -- John Rogers to be Keynote at Users Meeting -- 2015 APS Compton Award goes to Ice, Larson, and Sparks BRIEFLY NOTED -- Congratulations to Daniel Haskel, Winner of the 2015...

  12. 1997 APS Abstracts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Pedestal Region on Alcator C-Mod Oral Presentations Marmar, E. - Alcator C-Mod Physics Program Rice, J.- Observations of Central Toroidal Rotation in ICRF Heated Alcator...

  13. Introduction to APS | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Introduction to APS What is the APS? What is the APS? The Advanced Photon Source is a synchrotron light source that produces high-energy, high-brightness x-ray beams. The source is...

  14. 2013 Community Commitment plan approved

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Community Commitment Plan Approved Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue: September 1, 2016 all issues All Issues » submit 2013 Community Commitment plan approved The plan provides funding from LANS' management fee to invest in regional education, economic development, and charitable giving programs. October 1, 2012 dummy image Read our archives Contacts Editor Linda Anderman Email Community Programs Office Kurt Steinhaus

  15. APS Publications | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Sector(s)CAT(s) beamline(s) where the work was done, and whether or not GUP beam time was used, to apspubs@aps.anl.gov. Reminder for ANL employees: ANL employees are not...

  16. APS Organization Chart | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Organization Chart The Advanced Photon Source (APS) organization comprises three divisions and one project office. Advanced Photon Source Organization Photon Sciences Overview...

  17. APS - Residential Energy Efficient Rebate Program | Department...

    Broader source: Energy.gov (indexed) [DOE]

    99 home assessment become eligible for special rebates of up to 75% of the cost of air leak and duct sealing, and improving insulation. Individually, these rebates are capped at...

  18. DNP 2015: APS Division of Nuclear Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Registration and Accommodation request The companion fee covers the reception and companions program that is held in parallel with the plenary session. Non-member registration is for non APS members who wish to attend the sessions or be a vendor at the meeting. DNP 2015 Registration fee schedule Date Members Non-Members Students/Unemployed Companion Before Sept. 2 $275 $600 $100 $50 After Sept. 2 $350 $700 $175 $60 On-Site $400 $800 $200 $75 Registration and hotel accommodations will be handled

  19. Form Approved

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OGE Form 450, 5 CFR Part 2634, Subpart I U.S. Office of Government Ethics (January 2007) (Replaces September 2002 edition) Form Approved OMB NO. 3209-0006 CONFIDENTIAL FINANCIAL DISCLOSURE REPORT Executive Branch Why Must I File? The duties and responsibilities of your position require you to file the Confidential Financial Disclosure Report to avoid involvement in a real or apparent conflict of interest. The purpose of this report is to assist employees and their agencies in avoiding conflicts

  20. Form Approved

    Gasoline and Diesel Fuel Update (EIA)

    Approved 0MB No. 1905-0092. El A 457B (Expires May 31, 1990.) This survey is voluntary and authorized under the Federal Energy Administration Act of 1974 (Public Law 93-275} as amended. Information about specific households will be kept strictly confidential. The data will be summarized within large groupings for statistical purposes. 1987 Residential Energy Consumption Survey Energy Information Administration U.S. Department of Energy Location # Housing Unit # 111-116 117-118 EJA 4578 * 1987

  1. 1996ApJ...466..724G

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ApJ...466..724G 1996ApJ...466..724G 1996ApJ...466..724G 1996ApJ...466..724G 1996ApJ...466..724G 1996ApJ...466..724G 1996ApJ...466..724G 1996ApJ...466..724G

  2. Radioactive air emissions notice of construction for installation and operation of a waste retrieval system and tanks 241-AP-102 and 241-AP-104 project

    SciTech Connect (OSTI)

    DEXTER, M.L.

    1999-11-15

    This document serves as a notice of construction (NOC) pursuant to the requirements of Washington Administrative Code (WAC) 246 247-060, and as a request for approval to modify pursuant to 40 Code of Federal Regulations (CFR) 61 07 for the installation and operation of one waste retrieval system in the 24 1 AP-102 Tank and one waste retrieval system in the 241 AP 104 Tank Pursuant to 40 CFR 61 09 (a)( 1) this application is also intended to provide anticipated initial start up notification Its is requested that EPA approval of this application will also constitute EPA acceptance of the initial start up notification Project W 211 Initial Tank Retrieval Systems (ITRS) is scoped to install a waste retrieval system in the following double-shell tanks 241-AP 102-AP 104 AN 102, AN 103, AN-104, AN 105, AY 102 AZ 102 and SY-102 between now and the year 2011. Because of the extended installation schedules and unknowns about specific activities/designs at each tank, it was decided to submit NOCs as that information became available This NOC covers the installation and operation of a waste retrieval system in tanks 241 AP-102 and 241 AP 104 Generally this includes removal of existing equipment installation of new equipment and construction of new ancillary equipment and buildings Tanks 241 AP 102 and 241 AP 104 will provide waste feed for immobilization into a low activity waste (LAW) product (i.e. glass logs) The total effective dose equivalent (TEDE) to the offsite maximally exposed individual (MEI) from the construction activities is 0 045 millirem per year The unabated TEDE to the offsite ME1 from operation of the mixer pumps is 0 042 millirem per year.

  3. AP600 containment purge radiological analysis

    SciTech Connect (OSTI)

    O`Connor, M.; Schulz, J.; Tan, C.

    1995-02-01

    The AP600 Project is a passive pressurized water reactor power plant which is part of the Design Certification and First-of-a-Kind Engineering effort under the Advanced Light Water Reactor program. Included in this process is the design of the containment air filtration system which will be the subject of this paper. We will compare the practice used by previous plants with the AP600 approach to meet the goals of industry standards in sizing the containment air filtration system. The radiological aspects of design are of primary significance and will be the focus of this paper. The AP600 Project optimized the design to combine the functions of the high volumetric flow rate, low volumetric flow rate, and containment cleanup and other filtration systems into one multi-functional system. This achieves a more simplified, standardized, and lower cost design. Studies were performed to determine the possible concentrations of radioactive material in the containment atmosphere and the effectiveness of the purge system to keep concentrations within 10CFR20 limits and within offsite dose objectives. The concentrations were determined for various reactor coolant system leakage rates and containment purge modes of operation. The resultant concentrations were used to determine the containment accessibility during various stages of normal plant operation including refueling. The results of the parametric studies indicate that a dual train purge system with a capacity of 4,000 cfm per train is more than adequate to control the airborne radioactivity levels inside containment during normal plant operation and refueling, and satisfies the goals of ANSI/ANS-56.6-1986 and limits the amount of radioactive material released to the environment per ANSI/ANS 59.2-1985 to provide a safe environment for plant personnel and offsite residents.

  4. 1994ApJ...431..604G

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G

  5. Navigation Labels and Approval

    Broader source: Energy.gov [DOE]

    EERE has commonly used and approved navigation labels. To maintain consistency in navigation across EERE, the EERE Template Coordinator reviews and approves requests for new navigation labels and...

  6. AP-0001-001.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-PO-0001-001.doc. Building Security Date: 2000/05/12 1. Introduction: Building security is a top priority for all CAMD personnel. Theft and vandalism have negative impacts by virtue of the loss of research data as well as the monetary loss. 2. Purpose: The purpose of this policy is to insure the facility is secure when it is unoccupied. 3. Definitions: a. Secure means all building alarms are armed and the gate is locked. 4. Scope of Policy: There are three (3) buildings at the CAMD facility,

  7. 1992ApJ...399L..51G

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2ApJ...399L..51G 1992ApJ...399L..51G 1992ApJ...399L..51G 1992ApJ...399L..51G

  8. APS high heat load monochromator

    SciTech Connect (OSTI)

    Lee, W.K.; Mills, D.

    1993-02-01

    This document contains the design specifications of the APS high heat load (HHL) monochromator and associated accessories as of February 1993. It should be noted that work is continuing on many parts of the monochromator including the mechanical design, crystal cooling designs, etc. Where appropriate, we have tried to add supporting documentation, references to published papers, and calculations from which we based our decisions. The underlying philosophy behind performance specifications of this monochromator was to fabricate a device that would be useful to as many APS users as possible, that is, the design should be as generic as possible. In other words, we believe that this design will be capable of operating on both bending magnet and ID beamlines (with the appropriate changes to the cooling and crystals) with both flat and inclined crystal geometries and with a variety of coolants. It was strongly felt that this monochromator should have good energy scanning capabilities over the classical energy range of about 4 to 20 keywith Si (111) crystals. For this reason, a design incorporating one rotation stage to drive both the first and second crystals was considered most promising. Separate rotary stages for the first and second crystals can sometimes provide more flexibility in their capacities to carry heavy loads (for heavily cooled first crystals or sagittal benders of second crystals), but their tuning capabilities were considered inferior to the single axis approach.

  9. Audit Report: AP-B-95-02 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    B-95-02 Audit Report: AP-B-95-02 July 31, 1995 Audit of Selected Aspects of the Unclassified Computer Security Program at a DOE Headquarters Computing Facility Audit Report: AP-B-95-02 (77.9 KB) More Documents & Publications Evaluation Report on The Department's Unclassified Cyber Security Program 2002, DOE/IG-0567 Audit Report: IG-0818 Excessing of Computers Used for Unclassified Controlled Information at the Idaho National Lab

  10. APS: Lighting up the future

    SciTech Connect (OSTI)

    Potent, V.J.

    1993-09-01

    Work on the Advanced Photon Source (APS) at Argonne National Laboratory (ANL) involves the construction and supporting research and development for a national user facility for synchrotron radiation research in the x-ray region. The facility, when operational in 1997, will provide super-intense x-ray beams for many areas of basic research and will serve the entire US x-ray research community of several thousand users. This paper describes the pertinent features of the design, construction and planned operation of the facility; and the impact quality has had in these areas. In addition, the introduction of several quality management techniques such as total quality management, reliability/availability planning, and user interface are discussed concerning their status and success.

  11. APS Seminars & Meetings | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Series A lunchtime gathering with presentations of the newest results from the experiment hall floor. Speakers are not announced in advance. Monthly APS Colloquium A...

  12. APS User Information | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to APS, site access permission, user agreement, training, contactbio information your research: proposals, ESAFs, EEFs action items: things that need to be addressed before you...

  13. APS Map | Overview | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    technical facility: the linear accelerator, the booster synchrotron, the electron storage ring, insertion devices, and the experiment hall. APS systems map Next: Linear Accelerator...

  14. ELECTROCHEMICAL CORROSION TESTING OF TANKS 241-AN-102 & 241-AP-107 & 241-AP-108 IN SUPPORT OF ULTRASONIC TESTING

    SciTech Connect (OSTI)

    WYRWAS RB; DUNCAN JB

    2008-11-20

    This report presents the results of the corrosion rates that were measured using electrochemical methods for tanks 241-AN-102 (AN-102), 241-AP-107 (AP 107), and 241-AP-108 (AP-108) performed under test plant RPP-PLAN-38215. The steel used as materials of construction for AN and AP tank farms was A537 Class 1. Test coupons of A537 Class 1 carbon steel were used for corrosion testing in the AN-107, AP-107, and AP-108 tank waste. Supernate will be tested from AN-102, AP-107, and Ap-108. Saltcake testing was performed on AP-108 only.

  15. Approval memorandum for DOE participation in Voluntary Protection...

    Energy Savers [EERE]

    Programs Participants' Association (VPPPA) April 13, 1994 The Office of Safety and Quality Assurance (EH-30) is requesting approval for DOE membership in the VPPPA. Attached...

  16. Approved Sorbents, Stabilizers, and Void Fillers - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sorbents, Stabilizers, and Void Fillers About Us Hanford Site Solid Waste Acceptance Program What's New Acceptance Criteria Acceptance Process Tools Approved High Integrity Containers Approved Sorbents, Stabilizers, and Void Fillers Disposal Information Points of Contact Approved Sorbents, Stabilizers, and Void Fillers Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size Approved list has been temporarily discontinued. Please contact your waste services POC.

  17. Quality Procedure - Approved Suppliers List | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Approved Suppliers List Quality Procedure - Approved Suppliers List This procedure establishes the responsibilities, process, and records for developing and maintaining the Approved Suppliers List (ASL) for EM Headquarters Office of Standards and Quality Assurance in accordance with EM-QA-001, Environmental Management Quality Assurance Program. Quality Procedure - Approved Suppliers List (2.06 MB) More Documents & Publications Quality Procedure - Supplier Qualification Quality Procedure -

  18. Eastman, AP start on coal unit

    SciTech Connect (OSTI)

    1995-10-25

    Eastman Chemical and Air Products and Chemicals (AP) have started construction of a $214-million, coal-to-methanol demonstration unit at Eastmans site in Kingsport, TN. The project is part of the Department of Energy`s clean coal technology program and is receiving $93 million in federal support. The demonstration unit-which will have a methanol capacity of 260 tons/day-will use novel catalyst technology for converting coal-derived synthesis gas (syngas) to methanol. Unlike conventional technology that processes syngas through a fixed bed of dry catalyst particles, the liquid-phase methanol process converts the syngas in a single vessel containing catalysts suspended in mineral oil. The companies say the innovation allows the process to better able handle the gases from coal gasifiers and is more stable and reliable than existing processes. Eastman says it will use the methanol produced by the plant as a chemical feedstock. It currently uses methanol as an intermediate in making acetic anhydride and dimethyl terephthalate. In addition, the companies say the methanol will be evaluated as a feedstock in making methyl tert-butyl ether for reformulated fuels. Eastman also says it will evaluate coproducing dimethyl ether (DME) with the methanol. DME can be used as a fuel additive or blended with methanol for a chemical feedstock, according to Eastman.

  19. Tank 241-AP-107, grab samples, 7AP-99-1, 7AP-99-3 and 7AP-99-4 analytical results for the final report

    SciTech Connect (OSTI)

    BELL, K.E.

    1999-08-12

    This document is the format IV, final report for the tank 241-AP-107 (AP-107) grab samples taken in May 1999 to address waste compatibility concerns. Chemical, radiochemical, and physical analyses on the tank AP-107 samples were performed as directed in Compatibility Grab Sampling and Analysis Plan for Fiscal year 1999. Any deviations from the instructions provided in the tank sampling and analysis plan (TSAP) were discussed in this narrative. Interim data were provided earlier to River Protection Project (RPP) personnel, however, the data presented here represent the official results. No notification limits were exceeded.

  20. refractory_retain_whyte_APS07.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 1 Plasma Science & Fusion Center, MIT, Cambridge USA 2 FOM-Rijnhuizen, Netherlands APS Division of Plasma Physics Meeting Mini-Conference: First Micron of the Wall November...

  1. Microsoft PowerPoint - APS_07

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Barriers in Alcator C-Mod Catherine Fiore MIT Plasma Science and Fusion Center APS-DPP November 14, 2007 Orlando, Fl With Contributions from: W. L. Rowan , A. Dominguez, A. E....

  2. DNP 2015: APS Division of Nuclear Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Mexico Annual Fall Meeting of the APS Division of Nuclear Physics October 28-31, 2015 Convention Center in downtown Santa Fe, NM Timetable for all workshops, regular and...

  3. AP-PO-0002-001.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-PO-0002-001.doc Experimental Hall Date: 20010109 Experimental Hall Policy: The following policies are to be followed for access to the Experimental Hall: 1. Smoking is not...

  4. Arizona Public Service Company APS | Open Energy Information

    Open Energy Info (EERE)

    Public Service Company APS Jump to: navigation, search Name: Arizona Public Service Company (APS) Place: Phoenix, Arizona Zip: 85004 Product: Generates, transmits and distributes...

  5. APS Engineering Support Division (AES) | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Engineering Support Division (AES) The APS Engineering Support Division provides reliable operations and technical support to the Advanced Photon Source user community. AES...

  6. Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows Print This year's American Physical Society (APS) Fellows include six scientists from Berkeley Lab, three of whom are...

  7. APS2013_Koniges.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Appropriation (dollars in thousands - OMB Scoring) FY 2014 FY 2014 FY 2015 FY 2016 Enacted Current Enacted Request $ % Approp. Approp. Approp. Discretionary Summary By Appropriation Energy And Water Development And Related Agencies Appropriation Summary: Energy Programs Energy efficiency and renewable energy....................................... 1,900,641 1,824,876 1,914,195 2,722,987 +808,792 +42.3% Electricity delivery and energy reliability........................................ 147,242

  8. Approval of State and Indian Reclamation Program grants under Title IV of the Surface Mining Control and Reclamation Act of 1977: final environmental import statement

    SciTech Connect (OSTI)

    Not Available

    1983-01-01

    Approval of annual grant applications to states and Indian tribes is proposed in accordance with Title IV of the Surface Mining Control and Reclamation Act of 1977 (SMCRA). The grants are financed through assessments for abandoned coal mine reclamation. Fund collections are to continue through 1992. Granting of all available funds would provide the maximum possible amount of money and promote the highest level of reclamation of mined areas. Health and safety hazards associated with unreclaimed mines would be lessened, and habitat for fish, wildlife, and vegetation would be enhanced significantly. Mining reclamation projects would require evacuation of residents in affected areas. Reclamation activities would create dust and sediments, degrading air quality and surface flows. Endangered bat species dwelling in mine openings would be displaced or destroyed due to mine closures.

  9. Talks on Fermilab experiments at the 1992 APS meetings

    SciTech Connect (OSTI)

    Pordes, S.

    1992-03-01

    This report contains short abstracts of paper on Fermilab experiments at the 1992 APS meetings. (LSP)

  10. Improved Pharmacological and Structural Properties of HIV Fusion Inhibitor AP3 over Enfuvirtide: Highlighting Advantages of Artificial Peptide Strategy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhu, Xiaojie; Zhu, Yun; Ye, Sheng; Wang, Qian; Xu, Wei; Su, Shan; Sun, Zhiwu; Yu, Fei; Liu, Qi; Wang, Chao; et al

    2015-08-19

    Enfuvirtide (T20), is the first HIV fusion inhibitor approved for treatment of HIV/AIDS patients who fail to respond to the current antiretroviral drugs. However, its clinical application is limited because of short half-life, drug resistance and cross-reactivity with the preexisting antibodies in HIV-infected patients. Using an artificial peptide strategy, we designed a peptide with non-native protein sequence, AP3, which exhibited potent antiviral activity against a broad spectrum of HIV-1 strains, including those resistant to T20, and had remarkably longer in vivo half-life than T20. While the preexisting antibodies in HIV-infected patients significantly suppressed T20’s antiviral activity, these antibodies neither recognizedmore » AP3, nor attenuated its anti-HIV-1 activity. Structurally different from T20, AP3 could fold into single-helix and interact with gp41 NHR. The two residues, Met and Thr, at the N-terminus of AP3 form a hook-like structure to stabilize interaction between AP3 and NHR helices. Therefore, AP3 has potential for further development as a new HIV fusion inhibitor with improved antiviral efficacy, resistance profile and pharmacological properties over enfuvirtide. Meanwhile, this study highlighted the advantages of artificially designed peptides, and confirmed that this strategy could be used in developing artificial peptide-based viral fusion inhibitors against HIV and other enveloped viruses.« less

  11. Renewable energy projects approved

    Broader source: Energy.gov [DOE]

    Two renewable energy projects representing a $100 million-plus investment by Las Vegas-based Nevada Power Co.—a cost likely to be covered over time by the utility's customers—were approved Wednesday by state regulators.

  12. City of Phoenix - Energize Phoenix Program

    SciTech Connect (OSTI)

    Laloudakis, Dimitrios J.

    2014-09-29

    Energize Phoenix (EPHX) was designed as an ambitious, large-scale, three-year pilot program to provide energy efficiency upgrades in buildings, along Phoenix’s new Light Rail Corridor – part of a federal effort to reduce energy consumption and stimulate job growth, while simultaneously reducing the country’s carbon footprint and promoting a shift towards a green economy. The program was created through a 2010 competitive grant awarded to the City of Phoenix who managed the program in partnership with Arizona State University (ASU), the state’s largest university, and Arizona Public Service (APS), the state’s largest electricity provider. The U.S. Department of Energy (DOE) Better Buildings Neighborhood Program (BBNP) and the American Recovery and Reinvestment Act (ARRA) of 2009 provided $25M in funding for the EPHX program. The Light Rail Corridor runs through the heart of downtown Phoenix, making most high-rise and smaller commercial buildings eligible to participate in the EPHX program, along with a diverse mix of single and multi-family residential buildings. To ensure maximum impact and deeper market penetration, Energize Phoenix was subdivided into three unique parts: i. commercial rebate program, ii. commercial financing program, and iii. residential program Each component was managed by the City of Phoenix in partnership with APS. Phoenix was fortunate to partner with APS, which already operated robust commercial and residential rebate programs within its service territory. Phoenix tapped into the existing utility contractor network, provided specific training to over 100 contracting firms, and leveraged the APS rebate program structure (energy efficiency funding) to launch the EPHX commercial and residential rebate programs. The commercial finance program was coordinated and managed through a contract with National Bank of Arizona, NBAZ, which also provided project capital leveraging EPHX finance funds. Working in unison, approved contractors

  13. Program Plan | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Program Plan Revised Program Plan approval is pending, new program direction concepts are described in a 3-pager, here. 151124 REMS Slides

  14. Voluntary Protection Program Manuals | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manuals Voluntary Protection Program Manuals Voluntary Protection Program Manual U.S. Department Of Energy Approval Memo Issuing Revised VPP Program Documents (May 2012) Part I: ...

  15. ARM - Campaign Instrument - ap-surf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govInstrumentsap-surf Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Aerosol Profiler at Surface (AP-SURF) Instrument Categories Aerosols Campaigns Surface Observation in Support of in-situ Observations within the Arctic Boundary Layer [ Download Data ] North Slope Alaska, 2008.04.01 - 2008.05.31 Primary Measurements Taken The following measurements are those considered scientifically relevant. Refer to the datastream

  16. An Updated AP2 Beamline TURTLE Model

    SciTech Connect (OSTI)

    Gormley, M.; O'Day, S.

    1991-08-23

    This note describes a TURTLE model of the AP2 beamline. This model was created by D. Johnson and improved by J. Hangst. The authors of this note have made additional improvements which reflect recent element and magnet setting changes. The magnet characteristics measurements and survey data compiled to update the model will be presented. A printout of the actual TURTLE deck may be found in appendix A.

  17. Advanced Power Sources Ltd APS | Open Energy Information

    Open Energy Info (EERE)

    Sources Ltd APS Jump to: navigation, search Name: Advanced Power Sources Ltd (APS) Place: United Kingdom Product: UK R&D company based at Loughborough University focusing on fuel...

  18. Secretary Chu Statement on AP1000 Reactor Design Certification...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AP1000 Reactor Design Certification Secretary Chu Statement on AP1000 Reactor Design Certification December 22, 2011 - 3:25pm Addthis Washington, D.C. - U.S. Energy Secretary ...

  19. Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows Print Friday, 07 December 2012 00:00 This year's American...

  20. HAZWOPER Training Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    55 Revision 0 Hanford Standardized HAZWOPER Training Program Description Prepared for the U.S. Department of Energy Assistant Secretary for Environmental Management Approved for Public Release; Further Dissemination Unlimited Hanford Standardized HAZWOPER Training Program Description, DOE-0355 Page 2 of 12 Senior Management Team Approval Hanford Standardized HAZWOPER Training Program Description, DOE-0355 Page 3 of 12 Hanford Training Manager Approval Hanford Standardized HAZWOPER Training

  1. WPN 97-6: Approval of Wet-Spray Cellulose Insulation as an Allowable Weatherization Material

    Broader source: Energy.gov [DOE]

    To provide states with information about the approved use of wet-spray cellulose for use in the low-income Weatherization Assistance Program.

  2. Real Estate Approvals | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real Estate Approvals Real Estate Approvals Real Estate Approvals Policy Flash 2011-61, Acquisition Guide Chapter 17.3, Acquisition, Use, and Disposal of Real Estate (attachment)

  3. Real Estate Approvals | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real Estate Approvals Real Estate Approvals Real Estate Approvals Policy Flash 2011-61, Acquisition Guide Chapter 17.3, Acquisition, Use, and Disposal of Real Estate (attachment)

  4. DHS Letter - MERRTT Approval | Department of Energy

    Office of Environmental Management (EM)

    DHS Letter - MERRTT Approval DHS Letter - MERRTT Approval Letter approving MERRTT DHS Letter - MERRTT Approval (43.34 KB) More Documents & Publications 2008 MERRTT Revision Letter 2006 TEPP Annual Report 2004 TEPP Annual Report

  5. EA-134-APS Arizona Public Service Company | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4-APS Arizona Public Service Company EA-134-APS Arizona Public Service Company Order authorizing Arizona Public Service Company to export electric energy to Mexico. EA-134-APS Arizona Public Service Company (24.95 KB) More Documents & Publications EA-184 Morgan Stanley Capital Group Inc. EA-166 Duke Energy Trading and Marketing, L.L.C EA-181 H.Q Energy Services (U.S) Inc

  6. NERSC, LBL Researchers Share Materials Science Advances at APS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC, LBL Researchers Highlight Materials Science at APS NERSC, LBL Researchers Share Materials Science Advances at APS March 3, 2014 APSlogo NERSC and Lawrence Berkeley National Laboratory (LBL) are well represented this week at the American Physical Society (APS) March meeting. Some 10,000 physicists, scientists, and students are expected to attend this year's meeting, which takes place March 3-7 in Denver, CO. Physicists and students will report on groundbreaking research from industry,

  7. APS and Synchrotron-related Employment Opportunities | Advanced...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Opportunities Groundbreaking science and engineering at the APS has a real and positive impact on our technologies, our health, our economy, and our fundamental understanding of...

  8. PPPL researchers present cutting edge results at APS Plasma Physics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PPPL researchers present cutting edge results at APS Plasma Physics Conference November ... Gallery: Fast-camera image showing plasma during magnetic reconnection. Fast-camera image ...

  9. Microsoft Word - 2007 Cross Cut - APS response.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    External Reviewer Douglas Ohlendorf, University of Minnesota, External Reviewer Wei Yang, NIH, Bethesda, APS SAC Introduction: The reviewers met at the Advanced Photon Source...

  10. AP-3-B Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3-B Wholesale Power Rate Schedule AP-3-B Wholesale Power Rate Schedule Area: American ... American Electric Power Service Corporation (hereinafter called the Company), PJM ...

  11. AP-1-B Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1-B Wholesale Power Rate Schedule AP-1-B Wholesale Power Rate Schedule Area: American ... American Electric Power Service Corporation (hereinafter called the Company), the ...

  12. AP-2-B Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2-B Wholesale Power Rate Schedule AP-2-B Wholesale Power Rate Schedule Area: American ... American Electric Power Service Corporation (hereinafter called the Company), the ...

  13. AP-4-B Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4-B Wholesale Power Rate Schedule AP-4-B Wholesale Power Rate Schedule Area: American ... of American Electric Power Service Corporation (hereinafter called the Company) and ...

  14. CDM Accreditation Panel CDM AP | Open Energy Information

    Open Energy Info (EERE)

    Bonn, Germany Zip: 53153 Product: The CDM accreditation panel (CDM-AP) prepares the decision making of the Executive Board in accordance with the procedure for accrediting...

  15. Programming

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Programming Programming Compiling and linking programs on Euclid. Compiling Codes How to compile and link MPI codes on Euclid. Read More » Using the ACML Math Library How to compile and link a code with the ACML library and include the $ACML environment variable. Read More » Process Limits The hard and soft process limits are listed. Read More » Last edited: 2016-04-29 11:35:11

  16. Programming

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Programming Programming The genepool system has a diverse set of software development tools and a rich environment for delivering their functionality to users. Genepool has adopted a modular system which has been adapted from the Programming Environments similar to those provided on the Cray systems at NERSC. The Programming Environment is managed by a meta-module named similar to "PrgEnv-gnu/4.6". The "gnu" indicates that it is providing the GNU environment, principally GCC,

  17. Programming

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Read More Programming Tuning Options Tips for tuning performance on the Hopper system ... The ACML library is also supported on Hopper and Franklin. Read More PGAS Language ...

  18. Programming

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics ... Each programming environment contains the full set of compatible compilers and libraries. ...

  19. State of Ohio Approval Policy

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    STATE OF OHIO DIVISION OF STATE FIRE MARSHAL E 85 DISPENSER UTILIZATION APPROVAL POLICY When the Division of State Fire Marshal is involved in the approval process for a flammable/combustible liquid dispensing facility that utilizes E-blend, where a listed dispensing device is required by the state fire code and the proposed dispensing device is not specifically listed for the intended application, the following guidelines shall be followed in the approval process: As there are currently no

  20. Programming

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    using MPI and OpenMP on NERSC systems, the same does not always exist for other supported parallel programming models such as UPC or Chapel. At the same time, we know that these...

  1. APS User Information | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    found the Office of Science SCGSR Program website. The Midwest Center for Sturctural Genomics is now accepting applications for access to the MCSG User Resource. MCSG's structure...

  2. APS team works smarter, cuts substation construction costs by 36%

    SciTech Connect (OSTI)

    Not Available

    1993-05-01

    An aggressive, cost-cutting, team of T D employees at Arizona Public Service Co (APS) is building a new distribution substation in Phoenix for less than half the original cost that APS planners had calculated for the project's land, labor and materials. Scheduled for service in June of this year, APS analysts had originally projected land, labor and materials costs for the 20-MVA Bell substation at nearly $1.7-million-not including major equipment such as transformers, circuit breakers, and switches. However, after studying the project, an empowered APS crew was able to slash 36% off the original estimate-more than $610,000. What's more, APS spokesmen say that its new approach to substation construction and design has given its engineers and construction crews a laundry list of additional ideas to try out on future substation ventures. 4 figs., 1 tab.

  3. KCAT, Xradia, ALS and APS Performance Summary

    SciTech Connect (OSTI)

    Waters, A; Martz, H; Brown, W

    2004-09-30

    At Lawrence Livermore National Laboratory (LLNL) particular emphasis is being placed on the nondestructive characterization (NDC) of components, subassemblies and assemblies of millimeter-size extent with micrometer-size features (mesoscale). These mesoscale objects include materials that vary widely in composition, density, geometry and embedded features. Characterizing these mesoscale objects is critical for corroborating the physics codes that underlie LLNL's Stockpile Stewardship mission. In this report we present results from our efforts to quantitatively characterize the performance of several x-ray systems in an effort to benchmark existing systems and to determine which systems may have the best potential for our mesoscale imaging needs. Several different x-ray digital radiography (DR) and computed tomography (CT) systems exist that may be applicable to our mesoscale object characterization requirements, including microfocus and synchrotron systems. The systems we have benchmarked include KCAT (LLNL developed) and Xradia {mu}XCT (Xradia, Inc., Concord, CA), both microfocus systems, and Beamline 1-ID at the Advance Photon Source (APS) and the Tomography Beamline at the Advanced Light Source (ALS), both synchrotron based systems. The ALS Tomography Beamline is a new installation, and the data presented and analyzed here is some of the first to be acquired at the facility. It is important to note that the ALS system had not yet been optimized at the time we acquired data. Results for each of these systems has been independently documented elsewhere. In this report we summarize and compare the characterization results for these systems.

  4. APS Alternative Fuel (Hydrogen) Pilot Plant - Monitoring System Report

    SciTech Connect (OSTI)

    James Francfort; Dimitri Hochard

    2005-07-01

    The U.S. Department of Energy’s (DOE’s) Advanced Vehicle Testing Activity (AVTA), along with Electric Transportation Applications and Arizona Pubic Service (APS), is monitoring the operations of the APS Alternative Fuel (Hydrogen) Pilot Plant to determine the costs to produce hydrogen fuels (including 100% hydrogen as well as hydrogen and compressed natural gas blends) for use by fleets and other operators of advanced-technology vehicles. The hydrogen fuel cost data will be used as benchmark data by technology modelers as well as research and development programs. The Pilot Plant can produce up to 18 kilograms (kg) of hydrogen per day by electrolysis. It can store up to 155 kg of hydrogen at various pressures up to 6,000 psi. The dispenser island can fuel vehicles with 100% hydrogen at 5,000 psi and with blends of hydrogen and compressed natural gas at 3,600 psi. The monitoring system was designed to track hydrogen delivery to each of the three storage areas and to monitor the use of electricity on all major equipment in the Pilot Plant, including the fuel dispenser island. In addition, water used for the electrolysis process is monitored to allow calculation of the total cost of plant operations and plant efficiencies. The monitoring system at the Pilot Plant will include about 100 sensors when complete (50 are installed to date), allowing for analysis of component, subsystems, and plant-level costs. The monitoring software is mostly off-the-shelve, with a custom interface. The majority of the sensors input to the Programmable Automation Controller as 4- to 20-mA analog signals. The plant can be monitored over of the Internet, but the control functions are restricted to the control room equipment. Using the APS general service plan E32 electric rate of 2.105 cents per kWh, during a recent eight-month period when 1,200 kg of hydrogen was produced and the plant capacity factor was 26%, the electricity cost to produce one kg of hydrogen was $3.43. However, the

  5. Thermal Decomposition Characteristics of Orthorhombic Ammonium Perchlorate (o-AP) and an 0-AP/HTPB-Based Propellant

    SciTech Connect (OSTI)

    BEHRENS JR.,RICHARD; MINIER,LEANNA M.G.

    1999-10-25

    A study to characterize the low-temperature reactive processes for o-AP and an AP/HTPB-based propellant (class 1.3) is being conducted in the laboratory using the techniques of simultaneous thermogravimetric modulated beam mass spectrometry (STMBMS) and scanning electron microscopy (SEM). The results presented in this paper are a follow up of the previous work that showed the overall decomposition to be complex and controlled by both physical and chemical processes. The decomposition is characterized by the occurrence of one major event that consumes up to {approx}35% of the AP, depending upon particle size, and leaves behind a porous agglomerate of AP. The major gaseous products released during this event include H{sub 2}O, O{sub 2}, Cl{sub 2}, N{sub 2}O and HCl. The recent efforts provide further insight into the decomposition processes for o-AP. The temporal behaviors of the gas formation rates (GFRs) for the products indicate that the major decomposition event consists of three chemical channels. The first and third channels are affected by the pressure in the reaction cell and occur at the surface or in the gas phase above the surface of the AP particles. The second channel is not affected by pressure and accounts for the solid-phase reactions characteristic of o-AP. The third channel involves the interactions of the decomposition products with the surface of the AP. SEM images of partially decomposed o-AP provide insight to how the morphology changes as the decomposition progresses. A conceptual model has been developed, based upon the STMBMS and SEM results, that provides a basic description of the processes. The thermal decomposition characteristics of the propellant are evaluated from the identities of the products and the temporal behaviors of their GFRs. First, the volatile components in the propellant evolve from the propellant as it is heated. Second, the hot AP (and HClO{sub 4}) at the AP-binder interface oxidize the binder through reactions that

  6. Comparison of SPES-2 and APEX tests to examine AP600 integral system performance

    SciTech Connect (OSTI)

    Hochreiter, L.E.; Reyes, J.N. Jr.

    1995-12-31

    The Westinghouse Electric Corporation has performed a series of tests in the SPES-2 facility (Simulatore Per Esperienze di Sicurezza--Simulator for Safety Experimental Analysis) in Piacenza, Italy and in the APEX (Advanced Plant Experiment) facility, at Oregon State University. These testing programs are designed to evaluate the thermal hydraulic performance of the passive safety systems (gravity driven injection, natural convection, and passive cooling) of the Westinghouse Advanced Passive 600 MWe pressurized water reactor (AP600). They are also designed to obtain data that can be used to assess and validate the safety analysis techniques and computer codes being used to predict the transient system behavior of the AP600. This paper presents a comparison of the two test facility designs and the results of counterpart tests.

  7. AP600 design certification thermal hydraulics testing and analysis

    SciTech Connect (OSTI)

    Hochreiter, L.E.; Piplica, E.J.

    1995-09-01

    Westinghouse Electric Corporation, in conjunction with the Department of Energy and the Electric Power Research Institute, have been developing an advanced light water reactor design; the AP600. The AP600 is a 1940 Mwt, 600Mwe unit which is similar to a Westinghouse two-loop Pressurized Water Reactor. The accumulated knowledge on reactor design to reduce the capital costs, construction time, and the operational and maintenance cost of the unit once it begins to generate electrical power. The AP600 design goal is to maintain an overall cost advantage over fossil generated electrical power.

  8. 2012 APS-DPP Plasma Science Expo, Providence, RI | Princeton...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS-DPP Plasma Science Expo, Providence, RI View larger image IMG 1847 View larger image IMG 1598 View larger image IMG 1608 View larger image IMG 1609 View larger image IMG 1614...

  9. Microsoft Word - APS10_Highlight_I-mode

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in Alcator C-Mod , to be presented by Amanda Hubbard at 52nd Annual Meeting of the APS Division of Plasma Physics, November 8-12, 2010 Chicago, IL, 02:00 PM on Wednesday,...

  10. A hot-spare injector for the APS linac.

    SciTech Connect (OSTI)

    Lewellen, J. W.

    1999-04-13

    Last year a second-generation SSRL-type thermionic cathode rf gun was installed in the Advanced Photon Source (APS) linac. This gun (referred to as ''gun2'') has been successfully commissioned and now serves as the main injector for the APS linac, essentially replacing the Koontz-type DC gun. To help ensure injector availability, particularly with the advent of top-up mode operation at the APS, a second thermionic-cathode rf gun will be installed in the APS linac to act as a hot-spare beam source. The hot-spare installation includes several unique design features, including a deep-orbit Panofsky-style alpha magnet. Details of the hot-spare beamline design and projected performance are presented, along with some plans for future performance upgrades.

  11. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action Print Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad...

  12. DOE Contractor Work Force Restructuring Approval Thresholds

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contractor Work Force Restructuring Approval Thresholds Up to 100 employees Contractor can ... to provide approval for NNSA work force restructurings in consultation with LM 501 ...

  13. Critical Decision 0- Approve Mission Need

    Broader source: Energy.gov [DOE]

    Approval of CD-0 formally establishes a project and begins the process of conceptual planning and design used to develop alternative concepts and functional requirements. Additionally, Approval...

  14. Westinghouse Completes its AP1000® Test Stand

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Completes its AP1000® Test Stand Last June, CASL launched its first Virtual Environment for Reactor Applications (VERA) Test Stand on the Westinghouse engineering computer cluster. Westinghouse selected the AP1000® pressurized water reactor (PWR) first core for the Test Stand simulation because its advanced design and operational features, and imminent deployment in units under construction, make it a particularly relevant and engaging application of CASL technology. The Westinghouse Test

  15. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action AP-XPS Measures MIEC Oxides in Action Print Wednesday, 25 May 2011 00:00 Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad applications, including use in solid-oxide fuel cells, high-temperature electrolysis for synthetic fuel production, and oxygen-separating membranes for chemical processes or NOx-free combustion; however, their surface activity under reaction conditions has

  16. Los Alamos scientists join prestigious ranks of APS fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    scientists join prestigious ranks of APS fellows Los Alamos scientists join prestigious ranks of APS fellows Cristian Batista, Malcolm Boshier, Dana Dattelbaum, Stephen Doorn, Michelle Espy, George Rodriguez, Avadh Saxena, Sergei Tretiak and Lin Yin are the new honorees. February 23, 2015 Nine Los Alamos National Laboratory scientists were selected as fellows of the American Physical Society. Nine Los Alamos National Laboratory scientists were selected as fellows of the American Physical

  17. Physicist honored with new APS award | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physicist honored with new APS award By Jeanne Jackson DeVoe December 10, 2014 Tweet Widget Google Plus One Share on Facebook Ilya Dodin Ilya Dodin It's fitting that Theory Department physicist Ilya Dodin was the first to receive the American Physical Society's Thomas H. Stix Award for Outstanding Early Career Contributions to Plasma Physics Research. Dodin, honored at the annual APS-Division of Plasma Physics meeting in New Orleans in October, was recognized for his research on waves in

  18. APS Recent Publications | For the week ending 01.03.2016

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    list of entries in the APS Publications Database does not include abstracts, invited talks, awards, magazine articles, or patents. For complete lists, search the APS Publications...

  19. Product Review Process and Approvals

    Broader source: Energy.gov [DOE]

    Publications, exhibits, logos, and templates developed by EERE staff, laboratories, and contractors must be reviewed and approved by the Product Governance Team (PGT). The PGT meets every other week.

  20. Distributed Energy Resource Program

    Broader source: Energy.gov [DOE]

    Note: A series of orders issued on July 15, 2015 in  Docket 2015-53-E, Docket 2015-54-E, and Docket 2015-55-E approved the incentive programs for South Carolina's Distributed Energy Resource...

  1. Association Loan Program

    Broader source: Energy.gov [DOE]

    The homeowners' association should submit a proposal to AHFC for preliminary approval. The forms to start this loan process are located on the program web site. Loan limits are determined on a...

  2. Maui County - Solar Roofs Initiative Loan Program | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    program and, through the Hawaii Energy Rebate Program, offers a 1,000 rebate for installations through its approved independent solar contractors. Residential homeowners with...

  3. Duke Energy Progress Customer Scale Solar Rebate Program

    Broader source: Energy.gov [DOE]

    Duke Energy Progress' Customer Scale Solar Rebate Program, a part of Duke Energy's voluntary Distributed Energy Resource Program, was approved by an order issued on July 15, 2015.

  4. DOE Contractor Work Force Restructuring Approval Thresholds

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contractor Work Force Restructuring Approval Thresholds Up to 100 employees Contractor can make decision bit must notify DOE of intent of restructuring 101-200 employees DOE/NNSA field office is authorized to provide approval 201-500 employees LM is authorized to provide approval and NNSA Administrator is authorized to provide approval for NNSA work force restructurings in consultation with LM 501 and above employees Under Secretary/NNSA Administrator approval required

  5. Program Plan | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Coal and Coal-Biomass to Liquids Program Plan Revised Program Plan approval is pending, new program direction concepts are described in a 3-pager, here. 151124 REMS Slides

  6. Improved Pharmacological and Structural Properties of HIV Fusion Inhibitor AP3 over Enfuvirtide: Highlighting Advantages of Artificial Peptide Strategy

    SciTech Connect (OSTI)

    Zhu, Xiaojie; Zhu, Yun; Ye, Sheng; Wang, Qian; Xu, Wei; Su, Shan; Sun, Zhiwu; Yu, Fei; Liu, Qi; Wang, Chao; Zhang, Tianhong; Zhang, Zhenqing; Zhang, Xiaoyan; Xu, Jianqing; Du, Lanying; Liu, Keliang; Lu, Lu; Zhang, Rongguang; Jiang, Shibo

    2015-08-19

    Enfuvirtide (T20), is the first HIV fusion inhibitor approved for treatment of HIV/AIDS patients who fail to respond to the current antiretroviral drugs. However, its clinical application is limited because of short half-life, drug resistance and cross-reactivity with the preexisting antibodies in HIV-infected patients. Using an artificial peptide strategy, we designed a peptide with non-native protein sequence, AP3, which exhibited potent antiviral activity against a broad spectrum of HIV-1 strains, including those resistant to T20, and had remarkably longer in vivo half-life than T20. While the preexisting antibodies in HIV-infected patients significantly suppressed T20’s antiviral activity, these antibodies neither recognized AP3, nor attenuated its anti-HIV-1 activity. Structurally different from T20, AP3 could fold into single-helix and interact with gp41 NHR. The two residues, Met and Thr, at the N-terminus of AP3 form a hook-like structure to stabilize interaction between AP3 and NHR helices. Therefore, AP3 has potential for further development as a new HIV fusion inhibitor with improved antiviral efficacy, resistance profile and pharmacological properties over enfuvirtide. Meanwhile, this study highlighted the advantages of artificially designed peptides, and confirmed that this strategy could be used in developing artificial peptide-based viral fusion inhibitors against HIV and other enveloped viruses.

  7. WIPP_Panel_7_Approved

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Panel 7 Certified and Ready for Waste Disposal CARLSBAD, N.M., August 1, 2013 - In mid-July 2013, the New Mexico Environment Department (NMED) approved the use of Panel 7 for disposal of defense- related transuranic (TRU) waste at the Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP). Approval by NMED for each underground waste disposal panel prior to use is required under the WIPP Hazardous Waste Facility Permit (Permit). A panel consists of seven waste disposal rooms and each room

  8. EWEB- New Facilities Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Eugene Water and Electric Board (EWEB) provides design assistance and rebate incentives for new construction and major renovation projects. The program provides streamlined rebates for pre-approved...

  9. Laboratory Equipment Donation Program - Certification Statement

    Office of Scientific and Technical Information (OSTI)

    satisfactorily in a drug abuse assistance or rehabilitation program approved for such purposes by a Federal, State, or local health, law enforcement, or other appropriate agency. ...

  10. Paleontologists research the Tully Monster at APS | Argonne National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Paleontologists research the Tully Monster at APS Share Browse By - Any - General Argonne Information Energy -Energy efficiency --Vehicles ---Alternative fuels ---Automotive engineering ---Diesel ---Electric drive technology ---Hybrid & electric vehicles ---Hydrogen & fuel cells ---Internal combustion ---Powertrain research --Building design ---Construction --Manufacturing -Energy sources --Renewable energy ---Bioenergy ---Solar energy --Fossil fuels ---Natural Gas

  11. Studying unexplained veteran illnesses at the APS | Argonne National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Studying unexplained veteran illnesses at the APS Share Browse By - Any - General Argonne Information Energy -Energy efficiency --Vehicles ---Alternative fuels ---Automotive engineering ---Diesel ---Electric drive technology ---Hybrid & electric vehicles ---Hydrogen & fuel cells ---Internal combustion ---Powertrain research --Building design ---Construction --Manufacturing -Energy sources --Renewable energy ---Bioenergy ---Solar energy --Fossil fuels ---Natural Gas

  12. Quality Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    QP001 Revision 0 Effective October 15, 2001 QUALITY PROGRAM Prepared by Electric Transportation Applications Prepared by: _______________________________ Date:__________ Jude M. Clark Approved by: _______________________________________________ Date: ______________ Donald B. Karner Procedure ETA-QP001 Revision 0 2 2001 Electric Transportation Applications All Rights Reserved TABLE OF CONTENTS 1.0 Objectives 3 2.0 Scope 3 3.0 Documentation 3 4.0 Prerequisites 4 5.0 Exclusions 5 6.0 Quality

  13. Approved Experiments - January 20, 2006

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    January 20-21, 2006 ATLAS PAC Meeting Proposal # PI Name Title Days 946-2 David Jenkins Probing doorway states in the 12C+12C radiative capture reaction 7 1074X-2 X. Tang The Study of (p,p), (p,a) and (a,p) reactions using MUSIC and the thick target technique-2 3 1078-3 N. Scielzo Preliminary measurement of the beta-neutrino correlation in Oxygen-14 5 1079-2LI Philippe Collon Letter of intent to continue development of 39Ar AMS at ATLAS 0 1092-2 J. P. Schiffer The Structure of 13B 6 1107-2 L.

  14. Approval Synopsis - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Synopsis by Website Administrator Microsoft Word Document icon ApprovalSummary (5).doc - Microsoft Word Document, 24 KB (25088

  15. PPPL researchers present cutting edge results at APS Plasma Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conference | Princeton Plasma Physics Lab PPPL researchers present cutting edge results at APS Plasma Physics Conference November 10, 2014 Tweet Widget Google Plus One Share on Facebook Conceptual image of the solar wind from the sun encountering the Earth's magnetosphere. Conceptual image of the solar wind from the sun encountering the Earth's magnetosphere. Gallery: Fast-camera image showing plasma during magnetic reconnection. Fast-camera image showing plasma during magnetic reconnection.

  16. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action Print Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad applications, including use in solid-oxide fuel cells, high-temperature electrolysis for synthetic fuel production, and oxygen-separating membranes for chemical processes or NOx-free combustion; however, their surface activity under reaction conditions has been difficult, if not impossible, to ascertain, until recently. A

  17. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action Print Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad applications, including use in solid-oxide fuel cells, high-temperature electrolysis for synthetic fuel production, and oxygen-separating membranes for chemical processes or NOx-free combustion; however, their surface activity under reaction conditions has been difficult, if not impossible, to ascertain, until recently. A

  18. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action Print Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad applications, including use in solid-oxide fuel cells, high-temperature electrolysis for synthetic fuel production, and oxygen-separating membranes for chemical processes or NOx-free combustion; however, their surface activity under reaction conditions has been difficult, if not impossible, to ascertain, until recently. A

  19. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action Print Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad applications, including use in solid-oxide fuel cells, high-temperature electrolysis for synthetic fuel production, and oxygen-separating membranes for chemical processes or NOx-free combustion; however, their surface activity under reaction conditions has been difficult, if not impossible, to ascertain, until recently. A

  20. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action Print Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad applications, including use in solid-oxide fuel cells, high-temperature electrolysis for synthetic fuel production, and oxygen-separating membranes for chemical processes or NOx-free combustion; however, their surface activity under reaction conditions has been difficult, if not impossible, to ascertain, until recently. A

  1. 2014 APS/CNM/EMC Users Meeting | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    14 APS/CNM/EMC Users Meeting May 12-15, 2014 Meeting web site CNM-Specific Events Andreas Roelofs, Interim CNM Director CNM Facility Status Update CNM Plenary Session Keynote Speaker : Federico Capasso Robert L. Wallace Professor of Applied Physics and Vinton Hayes Senior Research Fellow in Electrical Engineering Harvard University "Flat Optics with Metasurfaces" David Schuster Physics Department and James Franck Institute University of Chicago "Hybrid Quantum Computing with

  2. NERSC User James Drake Receives 2010 APS Maxwell Prize for Plasma...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User James Drake Receives 2010 APS Maxwell Prize for Plasma Physics NERSC User James Drake Receives 2010 APS Maxwell Prize for Plasma Physics January 31, 2011 drake10.jpg Long-time...

  3. KP-AP-4-C Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AP-4-C Wholesale Power Rate Schedule KP-AP-4-C Wholesale Power Rate Schedule Area: American Electric Power System: Kerr-Philpott This rate schedule shall be available to public ...

  4. Acquisition Career Development Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-06-13

    To set forth requirements and responsibilities for the Department of Energy (DOE) Acquisition Career Development (ACD) Program, which implements Office of Federal Procurement Policy (OFPP) requirements, Federal Acquisition Regulation (FAR) requirements, Federal Acquisition Reform Act (FARA) requirements, and the career development objectives of Executive Order (E.O.) 12931. Change 1 approved 12-20-2001. Change 2 approved 06-13-03. Cancels DOE O 361.1 Chg 1. Canceled by DOE O 361.1A.

  5. Integrating Program Component Executables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Integrating Program Component Executables on Distributed Memory Architectures via MPH Chris Ding and Yun He Computational Research Division, Lawrence Berkeley National Laboratory University of California, Berkeley, CA 94720, USA chqding@lbl.gov, yhe@lbl.gov Abstract A growing trend in developing large and complex ap- plications on today's Teraflop computers is to integrate stand-alone and/or semi-independent program components into a comprehensive simulation package. One example is the climate

  6. REVIEW OF NRC APPROVED DIGITAL CONTROL SYSTEMS ANALYSIS

    SciTech Connect (OSTI)

    D.W. Markman

    1999-09-17

    Preliminary design concepts for the proposed Subsurface Repository at Yucca Mountain indicate extensive reliance on modern, computer-based, digital control technologies. The purpose of this analysis is to investigate the degree to which the U. S. Nuclear Regulatory Commission (NRC) has accepted and approved the use of digital control technology for safety-related applications within the nuclear power industry. This analysis reviews cases of existing digitally-based control systems that have been approved by the NRC. These cases can serve as precedence for using similar types of digitally-based control technologies within the Subsurface Repository. While it is anticipated that the Yucca Mountain Project (YMP) will not contain control systems as complex as those required for a nuclear power plant, the review of these existing NRC approved applications will provide the YMP with valuable insight into the NRCs review process and design expectations for safety-related digital control systems. According to the YMP Compliance Program Guidance, portions of various NUREGS, Regulatory Guidelines, and nuclear IEEE standards the nuclear power plant safety related concept would be applied to some of the designs on a case-by-case basis. This analysis will consider key design methods, capabilities, successes, and important limitations or problems of selected control systems that have been approved for use in the Nuclear Power industry. An additional purpose of this analysis is to provide background information in support of further development of design criteria for the YMP. The scope and primary objectives of this analysis are to: (1) Identify and research the extent and precedence of digital control and remotely operated systems approved by the NRC for the nuclear power industry. Help provide a basis for using and relying on digital technologies for nuclear related safety critical applications. (2) Identify the basic control architecture and methods of key digital control

  7. SCE&G- Customer Scale Solar Program

    Broader source: Energy.gov [DOE]

    South Carolina Electric & Gas (SCE&G) Customer Scale Solar Rebate Program, a part of SCE&G's voluntary Distributed Energy Resource Program, was approved by an order issued on July 15,...

  8. Duke Energy Carolinas Customer Scale Rebate Program

    Broader source: Energy.gov [DOE]

    Duke Energy Carolinas' Customer Scale Solar Rebate Program, a part of Duke Energy's voluntary Distributed Energy Resource Program,  was approved by an order issued on July 15, 2015.

  9. Processing Exemptions to Nuclear Safety Rules and Approval of Alternative Methods for Documented Safety Analyses

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    083-2009 June 2009 Reaffirmation 2015 DOE STANDARD PROCESSING EXEMPTIONS TO NUCLEAR SAFETY RULES AND APPROVAL OF ALTERNATIVE METHODS FOR DOCUMENTED SAFETY ANALYSES U.S. Department of Energy AREA SAFT Washington, DC 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1083-2009 ii This document is available on the Department of Energy Technical Standards Program Web Page at http://energy.gov/ehss/services/nuclear-safety/department-energy-technical-

  10. Processing Exemptions to Nuclear Safety Rules and Approval of Alternative Methods for Documented Safety Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    STD-1083-2009 June 2009 DOE STANDARD PROCESSING EXEMPTIONS TO NUCLEAR SAFETY RULES AND APPROVAL OF ALTERNATIVE METHODS FOR DOCUMENTED SAFETY ANALYSES U.S. Department of Energy AREA SAFT Washington D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE This document is available on the Department of Energy Technical Standards Program Web Page at http://www.hss.energy.gov/nuclearsafety/techstds DOE-STD-1083-2009 iii FOREWORD 1. This

  11. School Facility Program- Modernization Grants

    Broader source: Energy.gov [DOE]

    The School Facility Program (SFP) provides funding assistance to school districts for the modernization of school facilities. The assistance is in the form of grants approved by the State...

  12. Waste Receipt Quality Assurance Program - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Receipt Quality Assurance Program About Us Hanford Site Solid Waste Acceptance Program What's New Acceptance Criteria Acceptance Process Becoming a new Hanford Customer Annual Waste Forecast and Funding Arrangements Waste Stream Approval Waste Shipment Approval Waste Receipt Quality Assurance Program Waste Specification Records Tools Points of Contact Waste Receipt Quality Assurance Program Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size The Hanford Site has a

  13. Generic effluent monitoring system certification for AP-40 exhauster stack

    SciTech Connect (OSTI)

    Glissmeyer, J.A.; Davis, W.E.; Bussell, J.H.; Maughan, A.D.

    1997-09-01

    Tests were conducted to verify that the Generic Effluent Monitoring System (GEMS), as applied to the AP-40 exhauster stack, meets all applicable regulatory performance criteria for air sampling systems at nuclear facilities. These performance criteria address both the suitability of the air sampling probe location and the transport of the sample to the collection devices. The criteria covering air sampling probe location ensure that the contaminants in the stack are well mixed with the airflow at the probe location such that the extracted sample represents the whole. The sample transport criteria ensure that the sampled contaminants are quantitatively delivered to the collection device. The specific performance criteria are described in detail in the report. The tests demonstrated that the GEMS/AP-40 system meets all applicable performance criteria. The contaminant mixing tests were conducted by Pacific Northwest National Laboratory (PNNL) at the wind tunnel facility, 331-H Building, using a mockup of the actual stack. The particle sample transport tests were conducted by PNNL at the Numatec Hanford Company`s 305 Building. The AP-40 stack is typical of several 10-in. diameter stacks that discharge the filtered ventilation air from tank farms at the U.S. Department of Energy`s Hanford Site in Richland, Washington. The GEMS design features a probe with a single shrouded sampling nozzle, a sample delivery line, and sample collection system. The collection system includes a filter holder to collect the sample of record and an in-line detector head and filter for monitoring beta radiation-emitting particles. Unrelated to the performance criteria, it was found that the record sample filter holder exhibited symptoms of sample bypass around the particle collection filter. This filter holder should either be modified or replaced with a different type. 10 refs., 8 figs., 6 tabs.

  14.  Westinghouse Completes its AP1000 Test Stand

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

     Westinghouse Completes its AP1000 Test Stand  VERA-CS Coupled Multi-physics Capability demonstrated in a Full-core Simulation  TVA provides Watts Bar Operating Data to Support Validation of CASL Tools  University of Michigan adds Depletion Capability to MPACT for VERA-CS  VERA Data Transfer Processes Provided by DTK  Alternate Coupling Algorithm Investigations Completed  Role of HPC in the Nuclear Power Industry  TVA Test Stand Launched November 2013 Volume 1, Issue 4

  15. APS beamline standard components handbook, Version 1. 3

    SciTech Connect (OSTI)

    Hahn, U.; Shu, D.; Kuzay, T.M.

    1993-02-01

    This Handbook in its current version (1.3) contains descriptions, specifications, and preliminary engineering design drawings for many of the standard components. The design status and schedules have been provided wherever possible. In the near future, the APS plans to update engineering drawings of identified standard beamline components and complete the Handbook. The completed version of this Handbook will become available to both the CATs and potential vendors. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction.

  16. California Streamlines Approvals for Renewable Energy Projects

    Broader source: Energy.gov [DOE]

    California Governor Arnold Schwarzenegger signed an executive order on November 17 to streamline the state's approval process for renewable energy projects.

  17. PowerSaver Approved Lenders List

    Broader source: Energy.gov [DOE]

    This document describes the 2014 approved PowerSaver lender list with contact information for the various states across the United States.

  18. JOBAID-APPROVE A USERS TRAINING REQUEST

    Broader source: Energy.gov [DOE]

    The purpose of this job aid is to guide users through the step-by-step process of approving a user training request.

  19. List of Approved Changes - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Changes Tri-Party Agreement The Agreement Announcements List of Approved Changes TPA Project Manager's Lists Modifications for Public Comment Data Management MP-14 WIDS...

  20. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Y - Public, See below. Approved for Public Release; Further Dissemination Unlimited By Janis D. Aardal at 8:25 am, Oct 15, 2015 10/15/2015

  1. ATLAS APPROVED IN-BEAM EXPERIMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 785 Baktash Band Termination, Superdeformation and Complex Clusters in 32S 5 TOTAL 82 ATLAS APPROVED SOURCE EXPERIMENTS (Depending on Gammasphere Availability) Exp Spokesperson...

  2. Communications Product Review Process and Approvals | Department...

    Broader source: Energy.gov (indexed) [DOE]

    For the review and approval of EERE website projects, see Web Project Process and ... be more fitting, such as an electronic newsletter, presentation, Web page, or Web card? ...

  3. Final characterization and safety screen report of double shell tank 241-AP-105 for evaporator campaign 97-1

    SciTech Connect (OSTI)

    Miller, G.L.

    1997-01-20

    Evaporator candidate feed from tank 241-AP-105 (hereafter referred to as AP-105) was characterized for physical, inorganic, organic and radiochemical parameters by the 222-S Laboratory as directed by the Tank Sample and Analysis Plan (TSAP), References 1 through 4, and Engineering Change Notice, number 635332, Reference 5. This data package satisfies the requirement for a format IV, final report as described in Reference 1. This data package is also a follow-up to the 45-Day safety screen results for tank AP-105, Reference 8, which was issued on November 5, 1996, and is attached as Section II to this report. Preliminary data in the form of summary analytical tables were provided to the project in advance of this final report to enable early estimation of evaporator operational parameters, using the Predict modeling program. Analyses were performed at the 222-S Laboratory as defined and specified in the TSAP and the Laboratory's Quality Assurance P1an, References 6 and 7. Any deviations from the instructions documented in the TSAP are discussed in this narrative and are supported with additional documentation.

  4. Waste feed delivery environmental permits and approvals plan

    SciTech Connect (OSTI)

    Papp, I.G.

    1998-07-06

    This document describes the range of environmental actions, including required permits and other agency approvals, that may affect waste feed delivery (WFD) activities in the Hanford Site`s Tank Waste Remediation System (TWRS). This plan expands on the summary level information in the Tank Waste Remediation System Environmental Program Plan (HNF 1773) to address requirements that are most pertinent to WFD. This plan outlines alternative approaches to satisfying applicable environmental standards, and describes selected strategies for acquiring permits and other approvals needed for WFD to proceed. Appendices at the end of this plan provide preliminary cost and schedule estimates for implementing the selected strategies. The rest of this section summarizes the scope of WFD activities, including important TWRS operating information, and describes in more detail the objectives, structure, and content of this plan.

  5. Directory of Certificates of Compliance for radioactive materials packages: Report of NRC approved packages. Volume 1, Revision 18

    SciTech Connect (OSTI)

    1995-10-01

    The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volumes 1 and 2. An alphabetical listing by user name is included in the back of Volume 3 of approved QA programs. The reports include a listing of all users of each package design and approved QA programs prior to the publication date.

  6. Salt River Electric - Residential Energy Efficiency Rebate Program...

    Broader source: Energy.gov (indexed) [DOE]

    Geothermal Heat Pumps Heat Pumps CaulkingWeather-stripping DuctAir sealing Building Insulation Comprehensive MeasuresWhole Building CustomOthers pending approval Program Info...

  7. NV Energy -Energy Smart Schools Program | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    pending approval Vending Machine Controls Personal Computing Equipment Program Info Sector Name Utility Administrator Nevada Power Company Website http:www.nvenergy.com...

  8. Secretary Chu Announces Nearly $300 Million Rebate Program to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the initial application with the balance awarded after their program plans are approved. ... rebates include: central air conditioners, heat pumps (air source and geothermal), ...

  9. Acquisition Guide Chapter 42.2- Documentation and Approval of Federally Funded International Travel

    Broader source: Energy.gov [DOE]

    The subject guide chapter provides guidance to DOE Contracting Officers, Contracting Officer Representatives, and Program Officials on documentation and approval of federally funded international travel by Federal contractors and subcontractors. Contracting Officers, Contracting Officer Representatives or Program Officials responsible for reviewing and approving for payment Contractor invoices that include travel expenses must ensure that when a foreign air carrier is used a certification is provided with the invoice in accordance with §301-10.142 of the FTR. Reimbursement for travel expenses from a foreign air carrier fare may be denied if appropriate certification is not provided.

  10. Functional design criteria 241-AP-102 Flexible Receiver System

    SciTech Connect (OSTI)

    Roblyer, S.P.

    1995-02-16

    A mixer pump was installed in the 1.07 m (42-in.) riser of the central pump pit of tank 241-AP-102 to mitigate potential fluid separation particle sedimentation by mixing the tank`s contents. The mixer pump performed this function until failure. Its removal is now necessary to meet possible tank content removal commitments or other corrective actions. The proposed removal procedure requires a flexible receiver that will provide a barrier to contamination during removal and transfer of the pump to the mixer pump storage container. This document describes the functional design criteria of the flexible receiver. These criteria include the functional and performance requirements of the flexible receiver as a barrier to contamination during normal conditions and contingencies and the instrumentation requirements.

  11. The chemical abundances of the Ap star HD94660

    SciTech Connect (OSTI)

    Giarrusso, M. [Universit di Catania, Dipartimento di Fisica e Astronomia, Sezione Astrofisica, Via S. Sofia 78, 95123 Catania (Italy); INAF - Osservatorio Astrofisico di Catania, via S. Sofia 78, 95123 Catania (Italy); INFN - Laboratori Nazionali del Sud (Italy)

    2014-05-09

    In this work I present the determination of chemical abundances of the Ap star HD94660, a possible rapid oscillating star. As all the magnetic chemically peculiar objects, it presents CNO underabundance and overabundance of iron peak elements of ?100 times and of rare earths up to 4 dex with respect to the Sun. The determination was based on the conversion of the observed equivalent widths into abundances simultaneously to the determination of effective temperature and gravity. Since the Balmer lines of early type stars are very sensitive to the surface gravity while the flux distribution is sensitive to the effective temperature, I have adopted an iterative procedure to match the H{sub ?} line profile and the observed UV-Vis-NIR magnitudes of HD94660 looking for a consistency between the metallicity of the atmosphere model and the derived abundances. From my spectroscopic analysis, this star belongs to the no-rapid oscillating class.

  12. Fabrication and Testing of Deflecting Cavities for APS

    SciTech Connect (OSTI)

    Mammosser, John; Wang, Haipeng; Rimmer, Robert; Jim, Henry; Katherine, Wilson; Dhakal, Pashupati; Ali, Nassiri; Jim, Kerby; Jeremiah, Holzbauer; Genfa, Wu; Joel, Fuerst; Yawei, Yang; Zenghai, Li

    2013-09-01

    Jefferson Lab (Newport News, Virginia) in collaboration with Argonne National Laboratory (Argonne, IL) has fabricated and tested four first article, 2.8 GHz, deflecting SRF cavities, for Argonne's Short-Pulse X-ray (SPX) project. These cavities are unique in many ways including the fabrication techniques in which the cavity cell and waveguides were fabricated. These cavity subcomponents were milled from bulk large grain niobium ingot material directly from 3D CAD files. No forming of sub components was used with the exception of the beam-pipes. The challenging cavity and helium vessel design and fabrication results from the stringent RF performance requirements required by the project and operation in the APS ring. Production challenges and fabrication techniques as well as testing results will be discussed in this paper.

  13. Audit Report: AP-B-95-01 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AP-B-95-01 Audit Report: AP-B-95-01 November 1, 1994 Audit of Management and Control of Information Resources at Sandia National Laboratories Audit Report: AP-B-95-01 (1.97 MB) More Documents & Publications Audit Report: OAS-L-06-12 Final Notice of Violation, Sandia Corporation Audit Report: WR-B-97-07

  14. HPV16 E6 and E6AP differentially cooperate to stimulate or augment Wnt signaling

    SciTech Connect (OSTI)

    Sominsky, Sophia; Kuslansky, Yael; Shapiro, Beny; Jackman, Anna; Haupt, Ygal; Rosin-Arbesfeld, Rina; Sherman, Levana

    2014-11-15

    The present study investigated the roles of E6 and E6AP in the Wnt pathway. We showed that E6 levels are markedly reduced in cells in which Wnt signaling is activated. Coexpression of wild-type or mutant E6AP (C820A) in Wnt-activated cells stabilized E6 and enhanced Wnt/β-catenin/TCF transcription. Expression of E6AP alone in nonstimulated cells elevated β-catenin level, promoted its nuclear accumulation, and activated β-catenin/TCF transcription. A knockdown of E6AP lowered β-catenin levels. Coexpression with E6 intensified the activities of E6AP. Further experiments proved that E6AP/E6 stabilize β-catenin by protecting it from proteasomal degradation. This function was dependent on the catalytic activity of E6AP, the kinase activity of GSK3β and the susceptibility of β-catenin to GSK3β phosphorylation. Thus, this study identified E6AP as a novel regulator of the Wnt signaling pathway, capable of cooperating with E6 in stimulating or augmenting Wnt/β-catenin signaling, thereby possibly contributing to HPV carcinogenesis. - Highlights: • The roles of E6 and E6AP in the Wnt pathway were investigated. • E6AP stabilizes E6 and enhances E6 activity in augmentation of Wnt signaling. • E6AP cooperates with E6 to stabilize β-catenin and stimulate Wnt/β-catenin signaling. • E6AP and E6 act through different mechanisms to augment or stimulate Wnt signaling.

  15. Sample Approval Memo for Admin Chg - DOE Directives, Delegations, and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Requirements Sample Approval Memo for Admin Chg by Patricia Greeson Upload File Upload the file here Approval-Memo-AdminChg_6-27-16.docx - 17 KB Short Name approval-memo-adminchg

  16. CD-1, Approve Alternative Selection and Cost Range

    Office of Energy Efficiency and Renewable Energy (EERE)

    CD-1 approval marks the completion of the project definition phase and the conceptual design. This is an iterative process to define, analyze, and refine project concepts and alternatives. This process uses a systems engineering methodology that integrates requirements analysis, risk identification and analysis, acquisition strategies, and concept exploration in order to evolve a cost-effective, preferred solution to meet a mission need (refer to DOE G 413.3-1 for more information). The recommended alternative should provide the essential functions and capabilities at an optimum life-cycle cost, consistent with required cost, scope, schedule, performance, and risk considerations. It should be reflected in the site’s long-range planning documents as well. Approval of CD-1 provides the authorization to begin the project Execution Phase and allows PED funds to be used. The requirements needed to attain CD-1 are listed below. The cost range provided at CD-1 is the preliminary estimate for the selected alternative. As CD-1 progresses to CD-2, the TPC will be refined and the TPC established at CD-2 may be higher than the range defined at CD-1, in which case the PME must be notified. The CD-1 cost range is not the PB cost. The PB against which project success is measured will be established at CD-2. The only exception is when a construction budget request is submitted in advance of an approved CD-2. In this circumstance, refer to Appendix A, Paragraph 4.c.(2). If the top end of the original approved CD-1 cost range grows by more than 50% as the project proceeds toward CD-2, the Program, in coordination with the PME, must reassess the alternative selection process. Upon completing the review, the PME must approve a revised CD-1 identifying the new or reaffirmed selected alternative and an updated CD-1 cost range. This new CD-1 information, to include the new CD-1 cost range and CD-1 approval date, will be reflected within PARS II and all subsequent PDSs and similar

  17. 2011 Annual Planning Summary for Office of Legacy Management (LM), Grand Junction (See LM APS)

    Broader source: Energy.gov [DOE]

    The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2011 and 2012 within the Office of Legacy Management (LM), Grand Junction (See LM APS).

  18. Approval/Variation Request Comment Sheet

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EA15PC3041-3-0 Mar. 25, 2003 Rev. 0 Page 1 of 2 Approval/Variation Request Comment Sheet 1. Page of 2. G APPROVAL REQUEST 3. G VARIATION REQUEST 4. AR/VR No. 5. PO/Subcontract No. 6. Organization 7. Reviewer 8. Comment: 9. Disposition: Working Copy EA15PC3041-3-0 Mar. 25, 2003 Rev. 0 Page 2 of 2 Instructions for Filling Out Approval/Variation Request Comment Sheet Block 1. Technical Reviewer - Enter the total number of pages upon completion of the review. 2. Technical Reviewer - Check the

  19. DOE's Jefferson Lab Receives Approval To Start Construction of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE's Jefferson Lab Receives Approval To Start Construction of 310 Million Upgrade DOE's Jefferson Lab Receives Approval To Start Construction of 310 Million Upgrade NEWPORT ...

  20. SEP Request for Approval Form 4 - Alternative Adjustment Model...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Adjustment Model Application Methodology SEP Request for Approval Form 4 - Alternative Adjustment Model Application Methodology SEP-Request-for-Approval-Form-4Alternati...

  1. Energy Praises the Nuclear Regulatory Commission Approval of...

    Office of Environmental Management (EM)

    Praises the Nuclear Regulatory Commission Approval of the First United States Nuclear Plant Site in Over 30 Years Energy Praises the Nuclear Regulatory Commission Approval of the ...

  2. Global Nuclear Energy Partnership Steering Group Members Approve...

    Office of Environmental Management (EM)

    Steering Group Members Approve Transformation to the International Framework for Nuclear Energy Cooperation Global Nuclear Energy Partnership Steering Group Members Approve ...

  3. WPN 00-5: Approval of Replacement Refrigerators and Electric...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Provides states with the approval to include refrigerator and electric water heater replacements as an allowable measure. PDF icon WPN 00-5: Approval of Replacement Refrigerators ...

  4. Web Project Process and Approvals | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Process and Approvals Web Project Process and Approvals Follow this process whenever you are developing a new Office of Energy Efficiency and Renewable Energy (EERE) Web ...

  5. Environmental Programs Procedure Preparation, Revision, Review, Approval, and Use

    Broader source: Energy.gov [DOE]

    Supporting Technical Document for the Radiological Release Accident Investigation Report (Phase II Report)

  6. Notification of General User Proposal and Approved Program Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services » NEPA Documents » Notices of Availability (NOA) Notices of Availability (NOA) A Notice of Availability (NOA) is a formal notice, published in the Federal Register, that announces the issuance and public availability of a draft or final EIS. The Environmental Protection Agency NOA is the official public notification of an EIS; a DOE NOA is an optional notice used to provide information to the public. If you have any trouble finding a specific document, please contact

  7. LDRD Program Plan master

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Annual Report Thomas Jefferson National Accelerator Facility Newport News, Virginia (This page intentionally left blank) 2014 LDRD Annual Report APPROVALS __________________________________10/21/14 Hugh E. Montgomery Date Director Thomas Jefferson National Accelerator Facility __________________________________10/20/14 Lawrence S. Cardman Date LDRD Program Manager Thomas Jefferson National Accelerator Facility Published By: Thomas Jefferson National Accelerator Facility 12000 Jefferson Ave.

  8. Recently Approved Justification Memoranda - DOE Directives, Delegation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policy 434.1A, Conduct and Approval of Select Agent and Toxin Work at Department of Energy Sites Notice of Intent to Revise DOE Order 522.1, Pricing of Departmental Materials...

  9. DOE Approved Technical Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Approved Technical Standards DOE Approved Technical Standards Document ID Filter Document ID sort descending Title Date DOE-HDBK-1028-2009 Human Performance Improvement Handbook Volume 1 of 2 This Human Performance Improvement Handbook is a reference for anyone working in the Department of Energy (DOE) community who wants to learn more about human performance and how it can be improved.The handbook addresses the roles of individuals, leaders, and the organization in improving performance.

  10. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7:45 am, May 27, 2014 Approved for Public Release; Further Dissemination Unlimited Approved for Public Release; Further Dissemination Unlimited J. C. Fulton President and Chief Executive Officer April 2014 CHPRC-2014-04, Rev. 0 Monthly Performance Report U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 1 CHPRC-2014-04, Rev. 0 * Overview CHPRC Monthly Performance Report April 2014 CONTENTS EXECUTIVE SUMMARY

  11. The History of the APS Shock Compression of Condensed Matter Topical Group

    SciTech Connect (OSTI)

    Forbes, J W

    2001-05-02

    In order to provide broader scientific recognition and to advance the science of shock compressed condensed matter, a group of American Physical Society (APS) members worked within the Society to make this field an active part of the APS. Individual papers were presented at APS meetings starting in the 1940's and shock wave sessions were organized starting with the 1967 Pasadena meeting. Shock wave topical conferences began in 1979 in Pullman, WA. Signatures were obtained on a petition in 1984 from a balanced cross-section of the shock wave community to form an APS Topical Group (TG). The APS Council officially accepted the formation of the Shock Compression of Condensed Matter (SCCM) TG at its October 1984 meeting. This action firmly aligned the shock wave field with a major physical science organization. Most early topical conferences were sanctioned by the APS while those held after 1992 were official APS meetings. The topical group organizes a shock wave topical conference in odd numbered years while participating in shock wave/high pressure sessions at APS general meetings in even numbered years.

  12. History of the APS Topical Group on Shock Compression of Condensed Matter

    SciTech Connect (OSTI)

    Forbes, J W

    2001-10-19

    In order to provide broader scientific recognition and to advance the science of shock compressed condensed matter, a group of American Physical Society (APS) members worked within the Society to make this field an active part of the APS. Individual papers were presented at APS meetings starting in the 1940's and shock wave sessions were organized starting with the 1967 Pasadena meeting. Shock wave topical conferences began in 1979 in Pullman, WA. Signatures were obtained on a petition in 1984 from a balanced cross-section of the shock wave community to form an APS Topical Group (TG). The APS Council officially accepted the formation of the Shock Compression of Condensed Matter (SCCM) TG at its October 1984 meeting. This action firmly aligned the shock wave field with a major physical science organization. Most early topical conferences were sanctioned by the APS while those held after 1992 were official APS meetings. The topical group organizes a shock wave topical conference in odd numbered years while participating in shock wavehigh pressure sessions at APS general meetings in even numbered years.

  13. CD-0, Approve Mission Need

    Broader source: Energy.gov [DOE]

    The Initiation Phase begins with the identification of a mission-related need. A Program Office will identify a credible performance gap between its current capabilities and capacities and those required to achieve the goals articulated in its strategic plan. The Mission Need Statement (MNS) is the translation of this gap into functional requirements that cannot be met through other than material means. It should describe the general parameters of the solution and why it is critical to the overall accomplishment of the Department’s mission, including the benefits to be realized. The mission need is independent of a particular solution, and should not be defined by equipment, facility, technological solution, or physical end-item. This approach allows the Program Office the flexibility to explore a variety of solutions and not limit potential solutions (refer to DOE G 413.3-17). The requirements needed to attain CD-0 are listed below.

  14. Tandem Differential Mobility Analyzer/Aerodynamic Particle Sizer (APS) Handbook

    SciTech Connect (OSTI)

    Collins, D

    2010-06-18

    The tandem differential mobility analyzer (TDMA) is a single instrument that cycles through a series of complementary measurements of the physical properties of size-resolved submicron particles. In 2008, the TDMA was augmented through the addition of an aerodynamic particle sizer (APS), which extends the upper limit of the measured size distribution into the supermicron range. These two instruments are operated in parallel, but because they are controlled by a common computer and because the size distributions measured by the two are integrated in the produced datastreams, they are described together here. Throughout the day, the TDMA sequentially measures submicron aerosol size distributions and size-resolved hygroscopic growth distributions. More specifically, the instrument is operated as a scanning DMA to measure size distributions and as a TDMA to measure size-resolved hygroscopicity. A typical measurement sequence requires roughly 45 minutes. Each morning additional measurements are made of the relative humidity (RH) dependent hygroscopicity and temperature-dependent volatility of size-resolved particles. When the outside temperature and RH are within acceptable ranges, the hydration state of size-resolved particles is also characterized. The measured aerosol distributions complement the array of aerosol instruments in the Aerosol Observing System (AOS) and provide additional details of the light-scattering and cloud-nucleating characteristics of the aerosol.

  15. Identification and molecular characterization of the switchgrass AP2/ERF transcription factor superfamily, and overexpression of PvERF001 for improvement of biomass characteristics for biofuel

    SciTech Connect (OSTI)

    Wuddineh, Wegi A.; Mazarei, Mitra; Turner, Geoffry B.; Sykes, Robert W.; Decker, Stephen R.; Davis, Mark F.; C. Neal Stewart, Jr.

    2015-07-20

    The APETALA2/ethylene response factor (AP2/ERF) superfamily of transcription factors (TFs) plays essential roles in the regulation of various growth and developmental programs including stress responses. Members of these TFs in other plant species have been implicated to play a role in the regulation of cell wall biosynthesis. Here, we identified a total of 207 AP2/ERF TF genes in the switchgrass genome and grouped into four gene families comprised of 25 AP2-, 121 ERF-, 55 DREB (dehydration responsive element binding)-, and 5 RAV (related to API3/VP) genes, as well as a singleton gene not fitting any of the above families. The ERF and DREB subfamilies comprised seven and four distinct groups, respectively. Analysis of exon/intron structures of switchgrass AP2/ERF genes showed high diversity in the distribution of introns in AP2 genes versus a single or no intron in most genes in the ERF and RAV families. The majority of the subfamilies or groups within it were characterized by the presence of one or more specific conserved protein motifs. In silico functional analysis revealed that many genes in these families might be associated with the regulation of responses to environmental stimuli via transcriptional regulation of the response genes. Moreover, these genes had diverse endogenous expression patterns in switchgrass during seed germination, vegetative growth, flower development, and seed formation. Interestingly, several members of the ERF and DREB families were found to be highly expressed in plant tissues where active lignification occurs. These results provide vital resources to select candidate genes to potentially impart tolerance to environmental stress as well as reduced recalcitrance. Furthermore, overexpression of one of the ERF genes (PvERF001) in switchgrass was associated with increased biomass yield and sugar release efficiency in transgenic lines, exemplifying the potential of these TFs in the development of lignocellulosic feedstocks with

  16. Identification and molecular characterization of the switchgrass AP2/ERF transcription factor superfamily, and overexpression of PvERF001 for improvement of biomass characteristics for biofuel

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wuddineh, Wegi A.; Mazarei, Mitra; Turner, Geoffry B.; Sykes, Robert W.; Decker, Stephen R.; Davis, Mark F.; C. Neal Stewart, Jr.

    2015-07-20

    The APETALA2/ethylene response factor (AP2/ERF) superfamily of transcription factors (TFs) plays essential roles in the regulation of various growth and developmental programs including stress responses. Members of these TFs in other plant species have been implicated to play a role in the regulation of cell wall biosynthesis. Here, we identified a total of 207 AP2/ERF TF genes in the switchgrass genome and grouped into four gene families comprised of 25 AP2-, 121 ERF-, 55 DREB (dehydration responsive element binding)-, and 5 RAV (related to API3/VP) genes, as well as a singleton gene not fitting any of the above families. Themore » ERF and DREB subfamilies comprised seven and four distinct groups, respectively. Analysis of exon/intron structures of switchgrass AP2/ERF genes showed high diversity in the distribution of introns in AP2 genes versus a single or no intron in most genes in the ERF and RAV families. The majority of the subfamilies or groups within it were characterized by the presence of one or more specific conserved protein motifs. In silico functional analysis revealed that many genes in these families might be associated with the regulation of responses to environmental stimuli via transcriptional regulation of the response genes. Moreover, these genes had diverse endogenous expression patterns in switchgrass during seed germination, vegetative growth, flower development, and seed formation. Interestingly, several members of the ERF and DREB families were found to be highly expressed in plant tissues where active lignification occurs. These results provide vital resources to select candidate genes to potentially impart tolerance to environmental stress as well as reduced recalcitrance. Furthermore, overexpression of one of the ERF genes (PvERF001) in switchgrass was associated with increased biomass yield and sugar release efficiency in transgenic lines, exemplifying the potential of these TFs in the development of lignocellulosic feedstocks with

  17. City of Sunset Valley- Solar Water Heating Rebate Program

    Broader source: Energy.gov [DOE]

    In order to participate in the program, local residents must first be approved for a rebate through the Austin Energy program and meet the corresponding equipment, warranty, and installation requ...

  18. Portland General Electric- Heat Pump Rebate Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Portland General Electric's (PGE) Heat Pump Rebate Program offers residential customers a $200 rebate for an energy-efficient heat pump installed to PGE’s standards by a PGE-approved contractor....

  19. Appalachian Power (Electric)- Residential Energy Efficiency Programs

    Broader source: Energy.gov [DOE]

    On June 24, 2015 the Virginia State Corporation Commission approved various rate-payer funding energy efficiency programs for residential Appalachian Power customers in Virginia. Appalachian Power...

  20. SEP Request for Approval Form 7 - Other Situations for Consumption

    Energy Savers [EERE]

    Adjustment | Department of Energy 7 - Other Situations for Consumption Adjustment SEP Request for Approval Form 7 - Other Situations for Consumption Adjustment SEP-Request-for-Approval-Form-7_Other-Situations-for-Consumption-Adjustment.docx (36.48 KB) More Documents & Publications SEP Request for Approval Form 6 - Non-Routine Adjustments SEP Request for Approval Form 5 - Model Does Not Satisfy 3.4.1-3.4.10 Requirements SEP Request for Approval Form 4 - Alternative Adjustment Model

  1. Description of the OSU APEX test facility to assess AP600 passive safety

    SciTech Connect (OSTI)

    Hochreiter, L.E.; Lau, L.K.; Reyes, J.N. Jr.; Groome, J.T.

    1995-12-31

    The objective of this paper is to describe the Advanced Plant Experiment (APEX) test facility, which is a new integral system test facility located at Oregon State University (OSU) specifically scaled, designed, and built to simulate all of the important geometrical details of the Westinghouse AP600. The APEX facility has been designed and constructed to develop a database that can be used to validate the thermal hydraulic safety analysis codes that will be used in the AP600 design certification process. The test facility has been specifically designed and scaled to model small break loss-of-coolant and long-term cooling transients, which utilize the AP600 passive safety systems.

  2. 241-AP Tank Farm Construction Extent of Condition Review for Tank Integrity

    SciTech Connect (OSTI)

    Barnes, Travis J.; Gunter, Jason R.; Reeploeg, Gretchen E.

    2014-04-04

    This report provides the results of an extent of condition construction history review for the 241-AP tank farm. The construction history of the 241-AP tank farm has been reviewed to identify issues similar to those experienced during tank AY-102 construction. Those issues and others impacting integrity are discussed based on information found in available construction records, using tank AY-102 as the comparison benchmark. In the 241-AP tank farm, the sixth double-shell tank farm constructed, tank bottom flatness, refractory material quality, post-weld stress relieving, and primary tank bottom weld rejection were improved.

  3. Recently Approved Justification Memoranda - DOE Directives, Delegations,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Requirements Recently Approved Justification Memoranda by Website Administrator The following JMs were recently approved. JM DOE O 551.1D, Notice of Intent to Develop a Page Change to DOE O 551.1D, Official Foreign Travel JM DOE O 329.2, Request to Make a Page Change to DOE O 329.2, Excepted Service Authority for Exceptionally Well Qualified (EWQ) EQ Pay Plan Employees JM DOE G 415.1-2, Notice of Intent to Develop DOE G 415.1-2, Information Technology Project Execution Model Guide for

  4. Advanced Photon Source (APS) | U.S. DOE Office of Science (SC...

    Office of Science (SC) Website

    II (NSLS-II) Stanford Synchrotron Radiation Light Source (SSRL) Neutron Scattering ... The APS is one of only four third-generation, hard x-ray synchrotron radiation light ...

  5. Expression, purification, crystallization and structure of human adipocyte lipid-binding protein (aP2)

    SciTech Connect (OSTI)

    Marr, Eric; Tardie, Mark; Carty, Maynard; Brown Phillips, Tracy; Wang, Ing-Kae; Soeller, Walt; Qiu, Xiayang Karam, George

    2006-11-01

    The crystal structure of human adipocyte lipid-binding protein (aP2) with a bound palmitate is reported at 1.5 resolution. Human adipocyte lipid-binding protein (aP2) belongs to a family of intracellular lipid-binding proteins involved in the transport and storage of lipids. Here, the crystal structure of human aP2 with a bound palmitate is described at 1.5 resolution. Unlike the known crystal structure of murine aP2 in complex with palmitate, this structure shows that the fatty acid is in a folded conformation and that the loop containing Phe57 acts as a lid to regulate ligand binding by excluding solvent exposure to the central binding cavity.

  6. Audit Report: AP-FS-97-02 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FS-97-02 Audit Report: AP-FS-97-02 June 6, 1997 Audit of Departmental Integrated Standardized Core Accounting System (DISCAS) Operations at Selected Field Sites Audit Report: ...

  7. Comparative Study of Station Blackout Counterpart Tests in APEX and ROSA/AP600

    SciTech Connect (OSTI)

    Lafi, Abd Y.; Reyes, Jose N. Jr.

    2000-05-15

    A comparison is presented between station blackout tests conducted in both the Advanced Plant Experiment (APEX) facility and in the modified Rig of Safety Assessment (ROSA/AP600) Large-Scale Test Facility. The comparison includes the depressurization and liquid-level behavior during secondary-side blowdown, natural circulation, automatic depressurization system operation, and in-containment refueling water storage tank injection. Reasonable agreement between the test results from APEX NRC-2 and ROSA/AP600 AP-BO-01 has been observed with respect to the timing of depressurization and liquid draining rates. This indicates that the reduced height and pressure scaling of APEX preserves the sequence of events relative to the full-height and pressure ROSA/AP600.

  8. Microsoft PowerPoint - APS07_poster_AdvScen.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and the Alcator C-Mod team. MIT Plasma Science and Fusion Center *Princeton Plasma Physics Laboratory Poster NP8:66 49 th Annual Meeting of APS-DPP Orlando, Florida November...

  9. A Flexible Approach to Big Data at the APS | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Flexible Approach to Big Data at the APS November 23, 2015 11:00AM to 12:00PM Presenter Ray Osborn (MSD), Senior Physicist Location Building 401, Room A1100 Type Seminar Series...

  10. Analysis of N-16 concentration in primary cooling system of AP1000...

    Office of Scientific and Technical Information (OSTI)

    Analysis of N-16 concentration in primary cooling system of AP1000 power reactor Citation Details In-Document Search Title: Analysis of N-16 concentration in primary cooling system ...

  11. http://www.epa.gov/ttn/chief/ap42/index.html

    National Nuclear Security Administration (NNSA)

    This is current through the Fifth Edition, Supplement C of AP 42. For sections and chapters added after November 1997, see the chapter web pages below. Introduction Introduction to ...

  12. Sales and Use Tax Exclusion for Advanced Transportation and Alternative Energy Manufacturing Program

    Broader source: Energy.gov [DOE]

    To date, the Program has approved financial assistance for private entities in the following fields: electric vehicle manufacturing, solar photovoltaic manufacturing, landfill gas capture and...

  13. AP1000 Design Basis Event Simulation at the APEX-1000 Test Facility

    SciTech Connect (OSTI)

    Wright, Richard F.; Groome, John

    2004-07-01

    The AP1000 is a 1000 MWe advanced nuclear power plant that uses passive safety features to enhance plant safety and to provide significant and measurable improvements in plant simplification, reliability, investment protection and plant costs. The AP1000 relies heavily on the 600 MWe AP600 which received design certification in 1999. A critical part of the AP600 design certification process involved the testing of the passive safety systems. A one-fourth height, one-fourth pressure test facility, APEX-600, was constructed at the Oregon State University to study design basis events, and to provide a body of data to be used to validate the computer models used to analyze the AP600. This facility was extensively modified to reflect the design changes for AP1000 including higher power in the electrically heated rods representing the reactor core, and changes in the size of the pressurizer, core makeup tanks and automatic depressurization system. Several design basis events are being simulated at APEX-1000 including a double-ended direct vessel injection (DEDVI) line break and a 2-inch cold leg break. These tests show that the core remains covered with ample margin until gravity injection is established regardless of the initiating event. The tests also show that liquid entrainment from the upper plenum which is proportional to the reactor power does not impact the ability of the passive core cooling system to keep the core covered. (authors)

  14. Critical Decision 2 (CD-2) Approval Template | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Critical Decision 2 (CD-2) Approval Template Critical Decision 2 (CD-2) Approval Template File ExampleCD-2Template02-14-12.docx More Documents & Publications Example BCP...

  15. Chapter 71 - Review and Approval of Contract and Financial Assistance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Chapter 71 - Review and Approval of Contract and Financial Assistance Actions Files in PDF format PDF icon 71 1Headquarters approval final Dec 14.pdf PDF icon 71.2 - ...

  16. SEP Request for Approval Form 3 - Other Complex Regression Model...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 - Other Complex Regression Model Rationale SEP Request for Approval Form 3 - Other Complex Regression Model Rationale SEP-Request-for-Approval-Form-3Other-Complex-Regression-Mod...

  17. File:08HIATransmissionLineApproval.pdf | Open Energy Information

    Open Energy Info (EERE)

    8HIATransmissionLineApproval.pdf Jump to: navigation, search File File history File usage Metadata File:08HIATransmissionLineApproval.pdf Size of this preview: 463 599 pixels....

  18. SEP Request for Approval Form 7 - Other Situations for Consumption...

    Office of Environmental Management (EM)

    7 - Other Situations for Consumption Adjustment SEP Request for Approval Form 7 - Other Situations for Consumption Adjustment SEP-Request-for-Approval-Form-7Other-Situations-for-C...

  19. ISA Approves Standard for Wireless Automation in Process Control

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Applications | Department of Energy ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. ISA Approves Standard for

  20. LDRD Program Plan master

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Annual Report Thomas Jefferson National Accelerator Facility Newport News, Virginia (This page intentionally left blank) APPROVALS _ 10/25/15 Hugh E. Montgomery Date Director Thomas Jefferson National Accelerator Facility _ 10/25/15 Lawrence S. Cardman Date LDRD Program Manager Thomas Jefferson National Accelerator Facility Published By: Thomas Jefferson National Accelerator Facility 12000 Jefferson Ave. Newport News, VA 23606 This document and the material and data contained herein were

  1. Acquisition Career Development Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-12-20

    To set forth requirements and responsibilities for the Department of Energy (DOE) Acquisition Career Development (ACD) Program, which implements Office of Federal Procurement Policy (OFPP) requirements, Federal Acquisition Regulation (FAR) requirements, Federal Acquisition Reform Act (FARA) requirements, and the career development objectives of Executive Order (E.O.) 12931. Change 1 approved 12-20-2001. Cancels DOE O 361.1. Canceled by DOE O 361.1 Chg 2.

  2. President Roosevelt Approves Production of Atomic Bomb | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Approves Production of Atomic Bomb President Roosevelt Approves Production of Atomic Bomb Washington, DC President Roosevelt approves production of the atomic bomb following receipt of a National Academy of Sciences report determining that a bomb is feasible

  3. SPES-2, AP600 intergral system test S01007 2 inch CL to core make-up tank pressure balance line break

    SciTech Connect (OSTI)

    Bacchiani, M.; Medich, C.; Rigamonti, M.

    1995-09-01

    The SPES-2 is a full height, full pressure experimental test facility reproducing the Westinghouse AP600 reactor with a scaling factor of 1/395. The experimental plant, designed and operated by SIET in Piacenza, consists of a full simulation of the AP600 primary core cooling system including all the passive and active safety systems. In 1992, Westinghouse, in cooperation with ENEL (Ente Nazionale per l` Energia Elettrica), ENEA (Enter per le numove Technlogie, l` Energia e l` Ambient), Siet (Societa Informazioni Esperienze Termoidraulich) and ANSALDO developed an experimental program to test the integrated behaviour of the AP600 passive safety systems. The SPES-2 test matrix, concluded in November 1994, has examined the AP600 passive safety system response for a range of small break LOCAs at different locations on the primary system and on the passive system lines; single steam generator tube ruptures with passive and active safety systems and a main steam line break transient to demonstrate the boration capability of passive safety systems for rapid cooldown. Each of the tests has provided detailed experimental results for verification of the capability of the analysis methods to predict the integrated passive safety system behaviour. Cold and hot shakedown tests have been performed on the facility to check the characteristics of the plant before starting the experimental campaign. The paper first presents a description of the SPES-2 test facility then the main results of S01007 test {open_quotes}2{close_quotes} Cold Leg (CL) to Core Make-up Tank (CMT) pressure balance line break{close_quotes} are reported and compared with predictions performed using RELAP5/mod3/80 obtained by ANSALDO through agreement with U.S.N.R.C. (U.S. Nuclear Regulatory Commission). The SPES-2 nodalization and all the calculations here presented were performed by ANSALDO and sponsored by ENEL as a part of pre-test predictions for SPES-2.

  4. DOE Approved Technical Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    be used to develop or validate training programs for technical staff and managers at DOE nuclear facilities. Training programs based on the content of this guide should provide...

  5. Approved for Public Release Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8823 Revision 0 Approved for Public Release Further Dissemination Unlimited Hanford Reach Fall Chinook Redd Monitoring Report for Calendar Year 2014 Prepared for the U.S. Department of Energy Assistant Secretary for Environmental Management Contractor for the U.S. Department of Energy under Contract DE-AC06-09RL14728 P.O. Box 650 Richland, Washington 99352 HNF-58823 Revision 0 TRADEMARK DISCLAIMER Reference herein to any specific commercial product, process, or service by trade name, trademark,

  6. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10:05 am, Jun 25, 2014 Approved for Public Release; Further Dissemination Unlimited J. C. Fulton President and Chief Executive Officer May 2014 CHPRC-2014-05, Rev. 0 Monthly Performance Report U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 1 CHPRC-2014-05, Rev. 0 * Overview CHPRC Monthly Performance Report May 2014 CONTENTS EXECUTIVE SUMMARY ..............................................................................................................2 TARGET ZERO

  7. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    50 am, Aug 26, 2014 Approved for Public Release; Further Dissemination Unlimited J. C. Fulton President and Chief Executive Officer July 2014 CHPRC-2014-07, Rev. 0 Monthly Performance Report U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 1 CHPRC-2014-07, Rev. 0 * Overview CHPRC Monthly Performance Report July 2014 CONTENTS EXECUTIVE SUMMARY ..............................................................................................................2 TARGET ZERO

  8. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    25 am, Sep 30, 2014 Approved for Public Release; Further Dissemination Unlimited J. C. Fulton President and Chief Executive Officer August 2014 CHPRC-2014-08, Rev. 0 Monthly Performance Report U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 1 CHPRC-2014-08, Rev. 0 * Overview CHPRC Monthly Performance Report August 2014 CONTENTS EXECUTIVE SUMMARY ..............................................................................................................2 TARGET

  9. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Shauna E. Adams at 10:45 am, Jul 26, 2012 Approved for Public Release; Further Dissemination Unlimited J. G. Lehew President and Chief Executive Officer June 2012 CHPRC-2012-06, Rev. 0 Monthly Performance Report U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 1 CHPRC-2012-06, Rev. 0 * Overview CHPRC Monthly Performance Report June 2012 CONTENTS EXECUTIVE SUMMARY

  10. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2:51 pm, Jul 24, 2014 Approved for Public Release; Further Dissemination Unlimited J. C. Fulton President and Chief Executive Officer June 2014 CHPRC-2014-06, Rev. 0 Monthly Performance Report U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 1 CHPRC-2014-06, Rev. 0 * Overview CHPRC Monthly Performance Report June 2014 CONTENTS EXECUTIVE SUMMARY ..............................................................................................................2 TARGET

  11. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6:46 am, Oct 28, 2014 Approved for Public Release; Further Dissemination Unlimited J. A. Ciucci President and Chief Executive Officer September 2014 CHPRC-2014-09, Rev. 0 Monthly Performance Report U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 1 CHPRC-2014-09, Rev. 0 * Overview CHPRC Monthly Performance Report September 2014 CONTENTS EXECUTIVE SUMMARY ..............................................................................................................2

  12. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10:35 am, May 26, 2015 Approved for Public Release; Further Dissemination Unlimited April 2015 CHPRC-2015-04, Revision 0 U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 J. A. Ciucci President and Chief Executive Officer Monthly Performance Report 1 CHPRC-2015-04, Rev. 0 * Overview CHPRC Monthly Performance Report April 2015 CONTENTS EXECUTIVE SUMMARY ..............................................................................................................2

  13. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8:22 am, Feb 24, 2015 Approved for Public Release; Further Dissemination Unlimited J. A. Ciucci President and Chief Executive Officer January 2015 CHPRC-2015-01, Revision 0 Monthly Performance Report U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 1 CHPRC-2015-01, Rev. 0 * Overview CHPRC Monthly Performance Report January 2015 CONTENTS EXECUTIVE SUMMARY ..............................................................................................................2

  14. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9:09 am, Jan 06, 2015 Approved for Public Release; Further Dissemination Unlimited J. A. Ciucci President and Chief Executive Officer November 2014 CHPRC-2014-11, Revision 0 Monthly Performance Report U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 1 CHPRC-2014-11, Rev. 0 * Overview CHPRC Monthly Performance Report November 2014 CONTENTS EXECUTIVE SUMMARY

  15. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3:35 pm, Nov 24, 2014 Approved for Public Release; Further Dissemination Unlimited J. A. Ciucci President and Chief Executive Officer October 2014 CHPRC-2014-10, Revision 0 Monthly Performance Report U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 1 CHPRC-2014-10, Rev. 0 * Overview CHPRC Monthly Performance Report October 2014 CONTENTS EXECUTIVE SUMMARY ..............................................................................................................2

  16. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    39 pm, Jan 25, 2016 Approved for Public Release; Further Dissemination Unlimited December 2015 CHPRC-2015-12, Revision 0 U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 J. A. Ciucci President and Chief Executive Officer Monthly Performance Report 1 CHPRC-2015-12, Rev. 0 * Overview CHPRC Monthly Performance Report December 2015 CONTENTS EXECUTIVE SUMMARY ..............................................................................................................2

  17. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2:35 pm, Mar 28, 2016 Approved for Public Release; Further Dissemination Unlimited February 2016 CHPRC-2016-02, Revision 0 U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 J. A. Ciucci President and Chief Executive Officer Monthly Performance Report 1 CHPRC-2016-02, Rev. 0 * Overview CHPRC Monthly Performance Report February 2016 CONTENTS EXECUTIVE SUMMARY

  18. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    05 pm, Feb 22, 2016 Approved for Public Release; Further Dissemination Unlimited January 2016 CHPRC-2016-01, Revision 0 U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 J. A. Ciucci President and Chief Executive Officer Monthly Performance Report 1 CHPRC-2016-01, Rev. 0 * Overview CHPRC Monthly Performance Report January 2016 CONTENTS EXECUTIVE SUMMARY ..............................................................................................................2

  19. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2:23 pm, Nov 19, 2015 Approved for Public Release; Further Dissemination Unlimited October 2015 CHPRC-2015-10, Revision 0 U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 J. A. Ciucci President and Chief Executive Officer Monthly Performance Report 1 CHPRC-2015-10, Rev. 0 * Overview CHPRC Monthly Performance Report October 2015 CONTENTS EXECUTIVE SUMMARY ..............................................................................................................2

  20. On June 21, 2011, the HASQARD Focus Group approved the following revision to Sec

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 21, 2011, the HASQARD Focus Group approved the following revision to Section 10 in Volume 1 of the HASQARD replacing the original Section 10 found in Revision 3 of HASQARD in its entirety: 10.0 ASSESSMENTS Assessments document how the organization determines the suitability and effectiveness of the implemented quality system and the performance of the programs to which the quality system applies. Assessments may be performed by agencies or groups that are not under the control of laboratory

  1. Report on the value engineering workshop on APS beamline front ends

    SciTech Connect (OSTI)

    Kuzay, T.

    1993-01-01

    A formal value engineering evaluation process was developed to address the front end components of the beamlines for the Advanced Photon Source (APS). This process (described in Section 2) involved an information phase, a creative phase, a judgment phase, a development phase, and a recommendation phase. Technical experts from other national laboratories and industry were invited to a two-day Value Engineering Workshop on November 5-6, 1992. The results of this Workshop are described in Section 4. Following the Workshop, various actions by the APS staff led to the redesign of the front end components, which are presented in Sections 5 and 6. The cost benefit analysis is presented in Section 7. It is important of realize that an added benefit of the Workshop was to obtain numerous design evaluations and enhancements of the front end components by experts in the field. As the design work proceeds to Title II completion, the APS staff is including many of these suggestions.

  2. Federal Energy Management Program Director: Dr. Timothy Unruh | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy About the Federal Energy Management Program » Federal Energy Management Program Director: Dr. Timothy Unruh Federal Energy Management Program Director: Dr. Timothy Unruh photo_timothy_unruh.jpg Timothy Unruh, Ph.D., PE, Leadership in Energy and Environmental Design Accredited Professional (LEED AP), Certified Energy Manager (CEM), is director of the Federal Energy Management Program (FEMP). As FEMP Director, Dr. Unruh oversees the implementation of policy and actions that result

  3. Document Control Program | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training & Documents Document Control Program The Document Control (DC) Plan ensures that only approved, current versions of such documents are used in the workplace or transmitted to outside entities. This plan directs the preparation, review, approval, issuance, availability, and revision of documents with Laboratory-wide impact. Documents, regardless of origin and having Laboratory-wide impact, shall be registered and tracked through DC as part of the Laboratory's Quality Assurance

  4. Tank 241-AP-103 08/1999 Compatibility Grab Samples and Analytical Results for the Final Report

    SciTech Connect (OSTI)

    BELL, K.E.

    1999-12-09

    This document is the format IV, final report for the tank 241-AP-103 (AP-103) grab samples taken in August 1999 to address waste compatibility concerns. Chemical, radiochemical, and physical analyses on the tank AP-103 samples were performed as directed in ''Compatibility Grub Sampling and Analysis Plan for Fiscal Year 1999'' (Sasaki 1999a). Any deviations from the instructions provided in the tank sampling and analysis plan (TSAP) were discussed in this narrative. No notification limits were exceeded.

  5. AP and L sees window of opportunity to double revenue via cogeneration

    SciTech Connect (OSTI)

    Not Available

    1982-02-01

    The sale of cogenerated process steam to industries could allow Arkansas Power and Light to expand its operation from power generation to manufactured energy at double the revenue. Rising oil prices and pending gas deregulation are forcing industrial customers to look for alternative fuel supplies. Utilities must seize the opportunity to sell cogenerated steam before prospective customers decide to generate their own power and steam, although a user survey shows that industry is reluctant to commit the capital at this time. AP and L's system will join combined-cycle cogeneration and coal gasification. Four figures display the data developed during AP and L's continuing feasibility studies. (DCK)

  6. ARM - Field Campaign - Aerosol Life Cycle: UV-APS and Nano-SMPS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govCampaignsAerosol Life Cycle: UV-APS and Nano-SMPS ARM Data Discovery Browse Data Related Campaigns Aerosol Life Cycle IOP at BNL 2011.06.01, Sedlacek, OSC Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign : Aerosol Life Cycle: UV-APS and Nano-SMPS 2011.06.10 - 2011.06.25 Lead Scientist : Gannet Hallar For data sets, see below. Abstract Current estimates indicate that new particle formation globally account for a majority of Cloud

  7. Environmental Restoration Information Resource Management Program Plan

    SciTech Connect (OSTI)

    Not Available

    1994-09-01

    The Environmental Restoration Information Resources Management (ER IRM) Program Plan defines program requirements, organizational structures and responsibilities, and work breakdown structure and to establish an approved baseline against which overall progress of the program as well as the effectiveness of its management will be measured. This plan will guide ER IRM Program execution and define the program`s essential elements. This plan will be routinely updated to incorporate key decisions and programmatic changes and will serve as the project baseline document. Environmental Restoration Waste Management Program intersite procedures and work instructions will be developed to facilitate the implementation of this plan.

  8. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2015-06 ARJ 7/27/15 Approved for Public Release; Further Dissemination Unlimited 2015-06 ARJ 7/27/15 By Ashley R Jenkins at 1:53 pm, Jul 27, 2015 2015-06 ARJ 7/27/15 June 2015 CHPRC-2015-06, Revision 0 U.S. Department of Energy Contract, DE-AC06-08RL14788 Deliverable C.3.1.3.1 - 1 J. A. Ciucci President and Chief Executive Officer Monthly Performance Report 1 CHPRC-2015-06, Rev. 0 * Overview CHPRC Monthly Performance Report June 2015 CONTENTS EXECUTIVE SUMMARY

  9. New Hampshire Electric Co-op- Solar Hot Water Rebate Program

    Broader source: Energy.gov [DOE]

    Systems must be pre-approved to receive a rebate. Program funds are available on a first-come, first-served basis. See the program website listed above for more information and an application for...

  10. Approval of VPP Logo and Flag

    Broader source: Energy.gov [DOE]

    The Department of Energy Voluntary Protection Program, patterned after the Occupational Safety and Health Administration's Voluntary Protection Programs, is a visible symbol of our commitment to worker health and safety at Departmental facilities. One implementation activity remaining is formal authorization for flags to be awarded to sites in the program and permission to use a related logo.

  11. Alameda Municipal Power- Commercial New Construction Rebate Program

    Broader source: Energy.gov [DOE]

    Alameda Municipal Power (AMP) offers the following grant and rebate programs to AMP customers. Projects will only be funded if AMP receives and approves the application and performs a pre...

  12. Displacement damage effects on CMOS APS image sensors induced by neutron irradiation from a nuclear reactor

    SciTech Connect (OSTI)

    Wang, Zujun Huang, Shaoyan; Liu, Minbo; Xiao, Zhigang; He, Baoping; Yao, Zhibin; Sheng, Jiangkun

    2014-07-15

    The experiments of displacement damage effects on CMOS APS image sensors induced by neutron irradiation from a nuclear reactor are presented. The CMOS APS image sensors are manufactured in the standard 0.35 ?m CMOS technology. The flux of neutron beams was about 1.33 10{sup 8} n/cm{sup 2}s. The three samples were exposed by 1 MeV neutron equivalent-fluence of 1 10{sup 11}, 5 10{sup 11}, and 1 10{sup 12} n/cm{sup 2}, respectively. The mean dark signal (K{sub D}), dark signal spike, dark signal non-uniformity (DSNU), noise (V{sub N}), saturation output signal voltage (V{sub S}), and dynamic range (DR) versus neutron fluence are investigated. The degradation mechanisms of CMOS APS image sensors are analyzed. The mean dark signal increase due to neutron displacement damage appears to be proportional to displacement damage dose. The dark images from CMOS APS image sensors irradiated by neutrons are presented to investigate the generation of dark signal spike.

  13. Supporting document for the historical tank content estimate for AP-tank farm

    SciTech Connect (OSTI)

    Brevick, C.H.; Stroup, J.L.; Funk, J.W., Fluor Daniel Hanford

    1997-03-06

    This Supporting Document provides historical in-depth characterization information on AP-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the Southeast Quadrant of the Hanford 200 Areas.

  14. Survey and alignment report on the primary control network for the APS

    SciTech Connect (OSTI)

    Friedsam, H.; Penicka, M.; Zhao, S.

    1993-02-01

    During November 1992 the survey and alignment team measured the entire primary control network for the APS. This task had to be finished before the enclosure of the EAA and the RF buildings were put in place, inhibiting several lines of sight necessary for the determination of the monument locations.

  15. EVALUATION OF THE TEMPORARY TENT COVER TRUSS SYSTEM AP PRIMARY VENT SYSTEM

    SciTech Connect (OSTI)

    HAQ MA

    2009-12-31

    The purpose of this calculation is to evaluate a temporary ten cover truss system. This system will be used to provide weather protection to the workers during replacement of the filter for the Primary Ventilation System in AP Tank Farm. The truss system has been fabricated utilizing tubes and couplers, which are normally used for scaffoldings.

  16. AP1000{sup R} severe accident features and post-Fukushima considerations

    SciTech Connect (OSTI)

    Scobel, J. H.; Schulz, T. L.; Williams, M. G.

    2012-07-01

    The AP1000{sup R} passive nuclear power plant is uniquely equipped to withstand an extended station blackout scenario such as the events following the earthquake and tsunami at Fukushima without compromising core and containment integrity. The AP1000 plant shuts down the reactor, cools the core, containment and spent fuel pool for more than 3 days using passive systems that do not require AC or DC power or operator actions. Following this passive coping period, minimal operator actions are needed to extend the operation of the passive features to 7 days using installed equipment. To provide defense-in-depth for design extension conditions, the AP1000 plant has engineered features that mitigate the effects of core damage. Engineered features retain damaged core debris within the reactor vessel as a key feature. Other aspects of the design protect containment integrity during severe accidents, including unique features of the AP1000 design relative to passive containment cooling with water and air, and hydrogen management. (authors)

  17. AP1000{sup R} nuclear power plant safety overview for spent fuel cooling

    SciTech Connect (OSTI)

    Gorgemans, J.; Mulhollem, L.; Glavin, J.; Pfister, A.; Conway, L.; Schulz, T.; Oriani, L.; Cummins, E.; Winters, J. [Westinghouse Electric Company LLC, 1000 Westinghouse Drive, Cranberry Township, PA 16066 (United States)

    2012-07-01

    The AP1000{sup R} plant is an 1100-MWe class pressurized water reactor with passive safety features and extensive plant simplifications that enhance construction, operation, maintenance, safety and costs. The AP1000 design uses passive features to mitigate design basis accidents. The passive safety systems are designed to function without safety-grade support systems such as AC power, component cooling water, service water or HVAC. Furthermore, these passive features 'fail safe' during a non-LOCA event such that DC power and instrumentation are not required. The AP1000 also has simple, active, defense-in-depth systems to support normal plant operations. These active systems provide the first level of defense against more probable events and they provide investment protection, reduce the demands on the passive features and support the probabilistic risk assessment. The AP1000 passive safety approach allows the plant to achieve and maintain safe shutdown in case of an accident for 72 hours without operator action, meeting the expectations provided in the U.S. Utility Requirement Document and the European Utility Requirements for passive plants. Limited operator actions are required to maintain safe conditions in the spent fuel pool via passive means. In line with the AP1000 approach to safety described above, the AP1000 plant design features multiple, diverse lines of defense to ensure spent fuel cooling can be maintained for design-basis events and beyond design-basis accidents. During normal and abnormal conditions, defense-in-depth and other systems provide highly reliable spent fuel pool cooling. They rely on off-site AC power or the on-site standby diesel generators. For unlikely design basis events with an extended loss of AC power (i.e., station blackout) or loss of heat sink or both, spent fuel cooling can still be provided indefinitely: - Passive systems, requiring minimal or no operator actions, are sufficient for at least 72 hours under all possible pool

  18. BLM Approves California Geothermal Development Project | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy BLM Approves California Geothermal Development Project BLM Approves California Geothermal Development Project August 21, 2013 - 2:41pm Addthis The Bureau of Land Management (BLM) and the U.S. Forest Service Inyo National Forest on August 13 signed the Record of Decision approving a new 40-megawatt geothermal project near Mammoth Lakes, California. The Casa Diablo IV Geothermal Development Project will be built on lands administered by the Inyo National Forest and on private lands

  19. Enterprise Assessments Review of the Delegation of Safety Basis Approval

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Authority for Hazard Category 1, 2, and 3 Nuclear Facilities - April 2016 | Department of Energy Review of the Delegation of Safety Basis Approval Authority for Hazard Category 1, 2, and 3 Nuclear Facilities - April 2016 Enterprise Assessments Review of the Delegation of Safety Basis Approval Authority for Hazard Category 1, 2, and 3 Nuclear Facilities - April 2016 April 2016 Enterprise Assessments Review of the Delegation of Safety Basis Approval Authority for Hazard Category 1, 2, and 3

  20. Global Nuclear Energy Partnership Steering Group Members Approve

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transformation to the International Framework for Nuclear Energy Cooperation | Department of Energy Steering Group Members Approve Transformation to the International Framework for Nuclear Energy Cooperation Global Nuclear Energy Partnership Steering Group Members Approve Transformation to the International Framework for Nuclear Energy Cooperation June 18, 2010 - 12:00am Addthis The Global Nuclear Energy Partnership Steering Group met in Accra, Ghana on June 16-17, 2010 and approved

  1. Energy Department Approves Gulf Coast Exports of Liquefied Natural Gas |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Approves Gulf Coast Exports of Liquefied Natural Gas Energy Department Approves Gulf Coast Exports of Liquefied Natural Gas May 20, 2011 - 12:00am Addthis Washington, D.C. - The U.S. Department of Energy today issued a conditional authorization approving an application to export liquefied natural gas (LNG) from the Sabine Pass LNG Terminal in Louisiana, paving the way for thousands of new construction and domestic natural gas production jobs in Louisiana, Texas, and

  2. Patent Waivers Approved Before 2003 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Patent Waivers Approved Before 2003 Patent Waivers Approved Before 2003 This document lists all approved DOE patent waivers by class for 2002 and before. If you wish to obtain a copy of any of the patent waivers listed on this document please contact the Office of the Assistant General Counsel for Technology Transfer & Intellectual Property at GC-62@hq.doe.gov or (202)-586-2813. Pre-2003 Patent Waivers Information Sheet (217.83 KB) More Documents & Publications

  3. DOE Approves Field Test for Promising Carbon Capture Technology |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Approves Field Test for Promising Carbon Capture Technology DOE Approves Field Test for Promising Carbon Capture Technology November 20, 2012 - 12:00pm Addthis Washington, DC - A promising post combustion membrane technology that can separate and capture 90 percent of the carbon dioxide (CO2) from a pulverized coal plant has been successfully demonstrated and received Department of Energy (DOE) approval to advance to a larger-scale field test. In an $18.75 million

  4. LANS Board of Governors approves $3 million for education, economic

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    development, charitable giving in Northern New Mexico LANS approves $3 million for Northern New Mexico LANS Board of Governors approves $3 million for education, economic development, charitable giving in Northern New Mexico Funds approved by the LANS Board of Governors are administered through a Community Commitment Plan. September 23, 2014 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and

  5. Application & Approval | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Public Use of New Hope Center / Application & Approval Application & Approval Application and Approval - Interested organizations must apply for a permit. An organization must provide its tax ID number, billing address, event description, and contract information. For a permit to be issued, an organization must meet all qualifications and agree to abide by all terms and conditions. Alcoholic beverages are not permitted in New Hope Center. Y-12 may reject a permit request or revoke a

  6. Hawaii Clean Energy Initiative - Transmission Line Approval Permit...

    Open Energy Info (EERE)

    Reference LibraryAdd to library PermittingRegulatory Guidance - Instructions: Hawaii Clean Energy Initiative - Transmission Line Approval Permit PacketPermittingRegulatory...

  7. OVERPRESSURE BY SYSTEM DESIGN APPROVAL FORM PS-2 GENERAL Pressure...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OVERPRESSURE BY SYSTEM DESIGN APPROVAL FORM PS-2 GENERAL Pressure System Number: Pressure System Name: Design Authority: OVERPRESSURE BY SYSTEM DESIGN REPORT CONTAINS: (check if ...

  8. Notice of OMB Action Approving DOE Submission to Extend Information...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Notice of OMB Action Approving DOE Submission to Extend Information Collection Request Title: OE Recovery Act Financial Assistance Grants The Office of Management and Budget (OMB) ...

  9. BLM - Approved Resource Management Plan Amendments/Record of...

    Open Energy Info (EERE)

    BLM - Approved Resource Management Plan AmendmentsRecord of Decision for Solar Energy Development in Six Southwestern States Jump to: navigation, search OpenEI Reference...

  10. Reshaping Its Skyline: Y-12 Recieves Approval to Begin Multi...

    National Nuclear Security Administration (NNSA)

    Reshaping Its Skyline: Y-12 Recieves Approval to Begin Multi-Building Biology Complex Demolition Project | National Nuclear Security Administration Facebook Twitter Youtube Flickr...

  11. BLM Approves Salt Wells Geothermal Energy Projects | Open Energy...

    Open Energy Info (EERE)

    Energy Projects Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: BLM Approves Salt Wells Geothermal Energy Projects Abstract Abstract unavailable....

  12. President Roosevelt Approves Production of Atomic Bomb | National...

    National Nuclear Security Administration (NNSA)

    Approves Production of Atomic Bomb | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation...

  13. Approval of Contractor Executive Salaries by Department of Energy...

    Broader source: Energy.gov (indexed) [DOE]

    ... was referenced in each of the approval letters signed by the ORO procurement official ... performing decontamination and decommissioning work, performing work in the same ...

  14. Approval Memorandum for Guides - DOE Directives, Delegations, and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Requirements Memorandum for Guides by Website Administrator Microsoft Word Document icon ApprovalMemo-Guide (2).doc - Microsoft Word Document, 36 KB (37376

  15. POLICY GUIDANCE MEMORANDUM #11A Approval Process for Dual Compensation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    POLICY GUIDANCE MEMORANDUM 11A Approval Process for Dual Compensation Waivers for Reemployed Annuitants Process to grant dual compensation (salary-offset) waivers to reemployed ...

  16. Idaho Public Utilities Commission Approves Neal Hot Springs Power...

    Open Energy Info (EERE)

    Geothermal Area Regions (0) Retrieved from "http:en.openei.orgwindex.php?titleIdahoPublicUtilitiesCommissionApprovesNealHotSpringsPowerPurchaseAgreement&oldid76143...

  17. Appendix S-51 - Transmission Line Approval - Public Utilities...

    Open Energy Info (EERE)

    from "http:en.openei.orgwindex.php?titleAppendixS-51-TransmissionLineApproval-PublicUtilitiesCommission&oldid800735" Feedback Contact needs updating Image needs...

  18. Energy Department Approves Gulf Coast Exports of Liquefied Natural...

    Broader source: Energy.gov (indexed) [DOE]

    Washington, DC - The U.S. Department of Energy today issued a conditional authorization approving an application to export liquefied natural gas (LNG) from the Sabine Pass LNG ...

  19. Groundwater monitoring plan for the proposed state-approved land disposal structure

    SciTech Connect (OSTI)

    Reidel, S.P.

    1993-10-13

    This document outlines a detection-level groundwater monitoring program for the state-approved land disposal structure (SALDS). The SALDS is an infiltration basin proposed for disposal of treated effluent from the 200 Areas of the Hanford Site. The purpose of this plan is to present a groundwater monitoring program that is capable of determining the impact of effluent disposal at the SALDS on the quality of groundwater in the uppermost aquifer. This groundwater monitoring plan presents an overview of the SALDS, the geology and hydrology of the area, the background and indicator evaluation (detection) groundwater monitoring program, and an outline of a groundwater quality assessment (compliance) program. This plan does not provide a plan for institutional controls to track tritium beyond the SALDS.

  20. The US Muon Accelerator Program (MAP)

    SciTech Connect (OSTI)

    Bross, Alan D.; /Fermilab

    2010-12-01

    The US Department of Energy Office of High Energy Physics has recently approved a Muon Accelerator Program (MAP). The primary goal of this effort is to deliver a Design Feasibility Study for a Muon Collider after a 7 year R&D program. This paper presents a brief physics motivation for, and the description of, a Muon Collider facility and then gives an overview of the program. I will then describe in some detail the primary components of the effort.

  1. The US Muon Accelerator Program (MAP)

    SciTech Connect (OSTI)

    Bross, Alan D.

    2011-10-06

    The US Department of Energy Office of High Energy Physics has recently approved a Muon Accelerator Program (MAP). The primary goal of this effort is to deliver a Design Feasibility Study for a Muon Collider after a 7 year R and D program. This paper presents a brief physics motivation for, and the description of, a Muon Collider facility and then gives an overview of the program. I will then describe in some detail the primary components of the effort.

  2. The AP1000{sup R} China projects move forward to construction completion and equipment installation

    SciTech Connect (OSTI)

    Harrop, G.

    2012-07-01

    The AP1000 design is the only Generation III+ technology to receive design certification from the U.S. Nuclear Regulatory Commission. This evolutionary design provides the highest safety and performance standards and has several distinct advantages over other designs, including improved operations and reduced construction schedule risks through the use of modern, modular, engineering principles that allow construction and fabrication tasks traditionally performed in sequence to be undertaken in parallel. Since the first granting of Design Certification in 2005 by the NRC, the AP1000 design has been modified to meet emergent NRC requirements such as those requiring the design to withstand the impact of an aircraft crash. Both domestic and foreign utilities have turned to the Westinghouse AP1000 plant design to meet their near - and long-term sustainable energy needs. The first ever deployment of this advanced U.S. nuclear power technology began in China in 2007 with the award of a contract to build four AP1000 units, constructed in pairs at the coastal sites of Sanmen (Zhejiang Province) and Haiyang (Shandong Province). Currently, all four units are at an advanced stage of construction. The commercial operation date for Sanmen Unit 1 is November 2013 followed by Haiyang Unit 1 being operational in May 2014. Construction and equipment manufacture is at an advanced stage. Sanmen Unit 1 equipment that has been delivered includes the reactor vessel, the reactor vessel closure head, the passive residual heat removal heat exchanger, the integrated head package, the polar crane, and the refueling machine. The steam generators are also completed. The RV was installed within the containment vessel building in September 2011. The installation of this major equipment will allow the setting of the containment vessel top head. Haiyang Unit 1 is also achieving significant progress. Significant benefits continue to be realized as a result of lessons learned and experience gained

  3. Waste Feed Delivery Environmental Permits and Approvals Plan

    SciTech Connect (OSTI)

    TOLLEFSON, K.S.

    2000-01-18

    This plan describes the environmental permits approvals, and other requirements that may affect establishment of a waste feed delivery system for the Hanford Site's River Protection Project. This plan identifies and screens environmental standards for potential applicability, outlines alternatives for satisfying applicable standards, and describes preferred permitting and approval approaches.

  4. Approval Memorandum for Policies, Notices, Orders and Manuals - DOE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Directives, Delegations, and Requirements Memorandum for Policies, Notices, Orders and Manuals by Patricia Greeson Upload File Upload the file here ApprovalMemo-DeputySecretary6-29-16.docx - 23 KB Short Name approval-memo-dep-sec

  5. aps2007

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of heterodyned PCI measurements, ICRF simulation codes such as TORIC can be tested and wave amplitudes inside the plasma can be determined by "synthetic diagnostic" method...

  6. NAP-XX Defense Programs Business Requirements and Processes Manual

    National Nuclear Security Administration (NNSA)

    Programs http://nnsa.energy.gov printed copies are uncontrolled SUPPLEMENTAL DIRECTIVE Approved: 2-25-16 DEFENSE PROGRAMS BUSINESS PROCESS SYSTEM (DPBPS) NATIONAL NUCLEAR SECURITY ADMINISTRATION Office of Defense Programs NNSA SD 452.3-1A THIS PAGE INTENTIONALLY LEFT BLANK NNSA SD 452.3-1A 1 2-25-16 DEFENSE PROGRAMS BUSINESS PROCESS SYSTEM 1. PURPOSE. This supplemental directive (SD) establishes the Defense Programs Business Process System (DPBPS) Portal as the mechanism for implementing DOE

  7. An equivalent circuit model and power calculations for the APS SPX crab cavities.

    SciTech Connect (OSTI)

    Berenc, T. )

    2012-03-21

    An equivalent parallel resistor-inductor-capacitor (RLC) circuit with beam loading for a polarized TM110 dipole-mode cavity is developed and minimum radio-frequency (rf) generator requirements are calculated for the Advanced Photon Source (APS) short-pulse x-ray (SPX) superconducting rf (SRF) crab cavities. A beam-loaded circuit model for polarized TM110 mode crab cavities was derived. The single-cavity minimum steady-state required generator power has been determined for the APS SPX crab cavities for a storage ring current of 200mA DC current as a function of external Q for various vertical offsets including beam tilt and uncontrollable detuning. Calculations to aid machine protection considerations were given.

  8. Mechanical design upgrade of the APS storage ring rf cavity tuner

    SciTech Connect (OSTI)

    Jones, J.; Bromberek, D.; Kang, Y.

    1997-08-01

    The Advanced Photon Source (APS) storage ring (SR) rf system employs four banks of four spherical, single-cell resonant cavities. Each cavity is tuned by varying the cavity volume through insertion/retraction of a copper piston located at the circumference of the cavity and oriented perpendicular to the accelerator beam. During the commissioning of the APS SR, the tuners and cavity tuner ports were prone to extensive arcing and overheating. The existing tuners were modified to eliminate the problems, and two new, redesigned tuners were installed. In both cases marked improvements were obtained in the tuner mechanical performance. As measured by tuner piston and flange surface temperatures, tuner heating has been reduced by a factor of five in the new version. Redesign considerations discussed include tuner piston-to-housing alignment, tuner piston and housing materials and cooling configurations, and tuner piston sliding electrical contacts. The tuner redesign is also distinguished by a modular, more maintainable assembly.

  9. KP-AP-1-C Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1-C Wholesale Power Rate Schedule KP-AP-1-C Wholesale Power Rate Schedule Area: American Electric Power System: Kerr-Philpott This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Virginia to whom power may be transmitted and scheduled pursuant to contracts between the Government, American Electric Power Service Corporation (hereinafter called the Company), the Company's Transmission Operator, currently PJM Interconnection

  10. KP-AP-2-C Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2-C Wholesale Power Rate Schedule KP-AP-2-C Wholesale Power Rate Schedule Area: American Electric Power System: Kerr-Philpott This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Virginia to whom power may be transmitted pursuant to contracts between the Government, American Electric Power Service Corporation (hereinafter called the Company), the Company's Transmission Operator, currently PJM Interconnection LLC

  11. KP-AP-3-C Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3-C Wholesale Power Rate Schedule KP-AP-3-C Wholesale Power Rate Schedule Area: American Electric Power System: Kerr-Philpott This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Virginia to whom power may be scheduled pursuant to contracts between the Government, American Electric Power Service Corporation (hereinafter called the Company), PJM Interconnection LLC (hereinafter called PJM), and the Customer. This rate

  12. Analysis of an AP600 intermediate-size loss-of-coolant accident

    SciTech Connect (OSTI)

    Boyack, B.E.; Lime, J.F.

    1995-09-01

    A postulated double-ended guillotine break of an AP600 direct-vessel-injection line has been analyzed. This event is characterized as an intermediate-break loss-of-coolant accident. Most of the insights regarding the response of the AP600 safety systems to the postulated accident are derived from calculations preformed with the TRAC-PF1/MOD2 code. However, complementary insights derived from a scaled experiment conducted in the ROSA facility, as well as insights based upon calculations by other codes, are also presented. Based upon the calculated and experimental results, the AP600 will not experience a core heat up and will reach a safe shutdown state using only safety-class equipment. Only the early part of the long-term cooling period initiated by In-containment Refueling Water Storage Tank injection was evaluated. Thus, the observation that the core is continuously cooled should be verified for the later phase of the long-term cooling period when sump injection and containment cooling processes are important.

  13. DISCOVERY OF AN EXTENDED X-RAY JET IN AP LIBRAE

    SciTech Connect (OSTI)

    Kaufmann, S.; Wagner, S. J.; Tibolla, O.

    2013-10-20

    Chandra observations of the low-energy-peaked BL Lac object (LBL) AP Librae (AP Lib) revealed the clear discovery of a non-thermal X-ray jet. AP Lib is the first LBL with an extended non-thermal X-ray jet that shows emission into the very high energy range. The X-ray jet has an extension of ?15''(? 14 kpc). The X-ray jet morphology is similar to the radio jet observed with Very Large Array at 1.36 GHz emerging in the southeast direction and bends by 50 at a distance of 12'' toward the northeast. The intensity profiles of the X-ray emission studied are consistent with those found in the radio range. The spectral analysis reveals that the X-ray spectra of the core and jet region are both inverse-Compton-(IC)-dominated. This adds to a still small sample of BL Lac objects whose X-ray jets are IC-dominated and thus more similar to the high-luminosity Fanaroff-Riley II sources than to the low-luminosity Fanaroff-Riley I objects, which are usually considered to be the parent population of BL Lac objects.

  14. Project W-519 CDR supplement: Raw water and electrical services for privatization contractor, AP tank farm operations

    SciTech Connect (OSTI)

    Parazin, R.J.

    1998-07-31

    This supplement to the Project W-519 Conceptual Design will identify a means to provide RW and Electrical services to serve the needs of the TWRS Privatization Contractor (PC) at AP Tank Farm as directed by DOE-RL. The RW will serve the fire suppression and untreated process water requirements for the PC. The purpose of this CDR supplement is to identify Raw Water (RW) and Electrical service line routes to the TWRS Privatization Contractor (PC) feed delivery tanks, AP-106 and/or AP-108, and establish associated cost impacts to the Project W-519 baseline.

  15. NNSA approves LANL workforce reduction plan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Poster Session | National Nuclear Security Administration | (NNSA) announces winners of Stewardship Science Academic Programs Symposium Poster Session Tuesday, March 31, 2015 - 3:32pm NNSA Blog More than 275 individuals from NNSA and its laboratories, and academia attended this year's Stewardship Science Academic Programs Annual Review Symposium held in Santa Fe, N.M., earlier this month. The symposium featured overviews of work to date from ongoing grants and cooperative agreements from

  16. Count Directive No. Title OPI Approval Date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Preservation Award | Department of Energy Council Honors Oak Ridge's EM Program with Prestigious Historic Preservation Award Council Honors Oak Ridge's EM Program with Prestigious Historic Preservation Award August 15, 2016 - 12:35pm Addthis Left to right, ACHP Chairman Milford Wayne Donaldson; Knox Heritage Executive Director Kim Trent; OREM Manager Sue Cange; and ACHP Expert Member Robert Stanton with the Chairman’s Award for Achievement in Historic Preservation. Left to right, ACHP

  17. EVALUATION OF AP-FARM SIMULANT COMPOSITION FOR ROTARY MICROFILTER TESTING

    SciTech Connect (OSTI)

    HUBER HJ

    2011-09-19

    This document identifies the feed composition of a Hanford AP tank farm simulant for rotary microfiltration testing. The composition is based on an Hanford Tank Waste Operations Simulator (HTWOS) model run in combination with Tank Waste Information Network (TWINS) data and mineralogical studies of actual waste solids. The feed simulant is intended to be used in test runs at SRNL. The simulant will be prepared in two parts: (1) A supernate, composed of water-soluble salts and (2) The undissolved (actually, undissolvable) solids. Test slurries with distinct solids concentrations (e.g., 0.5, 5 and 10 wt%) are then prepared as needed. The base for the composition of supernate and solids is the modeled feed sequence for a deployment scenario of the Supplemental Pretreatment units within AP-farm. These units comprise a filtration part, the RMF, and a Cesium-removal part, a Small Column Ion Exchange. The primary use of this simulant is for filtration testing - however, in case that it is also used for ion-exchange tests, the amount of Cs-137 that would need to be added is available in Table 1 and Attachment 3. A modified model run (MMR-049) of the Hanford Tank Waste Operations Simulator (HTWOS) system plan 6 case 3 was performed to identify the feed sequence. Case 3 assumed supplemental treatment besides the low activity waste (LAW) melter with supplemental pretreatment supporting the pretreatment facility. The MMR did not cap the duration of supplemental pretreatment to 15 months, but rather used it throughout the entire treatment mission as an add-on option to the pretreatment facility at the Waste Treatment and Immobilization Plant (WTP). Tank 241-AP-105 (AP-105) was chosen as the feed tank to the filtration unit. Other parameters included a fixed minimum of 0.5 wt% solids in the feed and a maximum Na-concentration of 5M in the supernate. The solids rejection from the filtration unit was set to 99.99% and the maximum allowed amount of solids within tank AP-105 was set

  18. Solid Waste Assurance Program Implementation Plan

    SciTech Connect (OSTI)

    Irons, L.G.

    1995-06-19

    On June 6, 1995, a waiver to Hanford Site Solid Waste Acceptance Criteria, was approved by the US Department of Energy Richland Operations Office (RL) to replace the low-level, mixed, and transuranic (TRU) generator assessment programs with the Solid Waste Assurance Program (SWAP). This is associated with a waiver that was approved on March 16, 1995 to replace the Storage/Disposal Approval Record (SDAR) requirements with the Waste Specification System (WSS). This implementation plan and the SWAP applies to Solid Waste Disposal (SWD) functions, facilities, and personnel who perform waste acceptance, verification, receipt, and management functions of dangerous, radioactive, and mixed waste from on- and off-site generators who ship to or within the Hanford Site for treatment, storage, and/or disposal (TSD) at SWD TSD facilities.

  19. Project W-314 phase I environmental permits and approvals plan

    SciTech Connect (OSTI)

    TOLLEFSON, K.S.

    1999-02-24

    This document describes the range of environmental actions, including required permits and other agency approvals, for Project W-314 activities in the Hanford Site's Tank Waste Remediation System. This document outlines alternative approaches to satisfying applicable environmental standards, and describes selected strategies for acquiring permits and other approvals needed for waste feed delivery to proceed. This document also includes estimated costs and schedule to obtain the required permits and approvals based on the selected strategy. It also provides estimated costs for environmental support during design and construction based on the preliminary project schedule provided.

  20. CRAD, Nuclear Safety Delegations for Documented Safety Analysis Approval

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - January 8, 2015 (EA CRAD 31-09, Rev. 0) | Department of Energy Nuclear Safety Delegations for Documented Safety Analysis Approval - January 8, 2015 (EA CRAD 31-09, Rev. 0) CRAD, Nuclear Safety Delegations for Documented Safety Analysis Approval - January 8, 2015 (EA CRAD 31-09, Rev. 0) January 8, 2015 Nuclear Safety Delegations for Documented Safety Analysis Approval (EA CRAD 31-09, Rev. 0) This Criteria Review and Approach Document (EA CRAD 31-09, Rev. 0) provides objectives, criteria,

  1. Department of Energy Commends the Nuclear Regulatory Commission's Approval

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of a Second Early Site Permit in Just One Month | Department of Energy Commends the Nuclear Regulatory Commission's Approval of a Second Early Site Permit in Just One Month Department of Energy Commends the Nuclear Regulatory Commission's Approval of a Second Early Site Permit in Just One Month March 27, 2007 - 12:10pm Addthis The Entergy Corporation's Grand Gulf Site in Mississippi Receives NRC Approval for an ESP WASHINGTON, DC - The U.S. Department of Energy (DOE) today applauded the

  2. SEP Request for Approval Form 5 - Model Does Not Satisfy 3.4...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    KB) More Documents & Publications SEP Request for Approval Form 3 - Other Complex Regression Model Rationale SEP Request for Approval Form 7 - Other Situations for Consumption ...

  3. INTERIM REPORT FOR HANFORD TANKS AY-102 & AP-101 EFFECT OF CHEMISTRY & OTHER VARIABLES ON CORROSION & STRESS CORROSION CRACKING

    SciTech Connect (OSTI)

    HARTY, W.M.

    2007-05-05

    The objective of this work is to determine the range of conditions where the tank steel is susceptible to localized corrosion and SCC in simulants for waste in tanks AY-102 and AP-101.

  4. Evaluation of the Scaling of the APEX-1000 Test Facility to AP1000 for Design Basis Events

    SciTech Connect (OSTI)

    Wright, Richard F.; Gagnon, Andre; Skinner, Jesse; Groome, John

    2004-07-01

    The AP1000 is a 1000 MWe advanced nuclear power plant that uses passive safety features to enhance plant safety and to provide significant and measurable improvements in plant simplification, reliability, investment protection and plant costs. The AP1000 relies heavily on the 600 MWe AP600 which received design certification in 1999. A critical part of the AP600 design certification process involved the testing of the passive safety systems. A one-fourth height, one-fourth pressure test facility, APEX-600, was constructed at the Oregon State University to study design basis events, and to provide a body of data to be used to validate the computer models used to analyze the AP600. This facility was extensively modified to reflect the design changes for AP1000 including higher power in the electrically heated rods representing the reactor core, and changes in the size of the pressurizer, core makeup tanks and automatic depressurization system. Several design basis events have been simulated at APEX-1000 including double-ended direct vessel injection (DEDVI) line break, 2-inch cold leg break, and inadvertent actuation of the automatic depressurization system. These events were analyzed as part of the AP1000 safety analysis using the NOTRUMP computer code. Applying the scaling factors that were used to size the APEX-1000 facility, the test results can be compared to the NOTRUMP plant simulations. These comparisons indicate the similarity between the design basis events in AP1000 and APEX-1000, the adequacy of the scaling of APEX-1000, and the applicability of the NOTRUMP code. (authors)

  5. Inventory of Safety-Related Codes and Standards for Energy Storage Systems and Related Experiences with System Approval and Acceptance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PNNL-23618 Inventory of Safety-related Codes and Standards for Energy Storage Systems with some Experiences related to Approval and Acceptance DR Conover September 2014 Prepared for the U.S. Department of Energy Energy Storage Program under Contract DE-AC05-76RL01830 Pacific Northwest National Laboratory Richland, Washington 99352 i ii Summary Purpose The purpose of this document is to identify laws; rules; model codes; and codes, standards, regulations (CSR) specifications related to safety

  6. Protection Programming Defensive Planning for Fixed Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NOT MEASUREMENT SENSITIVE DOE STD-1207-2012 December 2012 DOE STANDARD Protection Program Defensive Planning For Fixed Facilities U.S. Department of Energy AREA SANS Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE STD-1207-2012 This Page Intentionally Left Blank ii DOE STD-1207-2012 TABLE OF CONTENTS

  7. Secretary Jewell Announces Approval of Second Utility-Scale Solar...

    Broader source: Energy.gov (indexed) [DOE]

    (DOI) Sally Jewell announced on May 7, 2014, the approval of the 200-megawatt Moapa Solar Energy Center Project on tribal trust land in Nevada and that nine federally recognized ...

  8. DOI Announces Two Solar Projects Approved in California, Nevada

    Broader source: Energy.gov [DOE]

    The U.S. Department of the Interior (DOI) announced the approval of two solar energy projects located near the Nevada-California border that are expected to supply 550 megawatts of renewable energy.

  9. DOI Approves Three Renewable Energy Projects in Arizona and Nevada

    Broader source: Energy.gov [DOE]

    The U.S. Department of the Interior (DOI) on June 3 announced the approval of three major renewable energy projects in Arizona and Nevada that are expected to deliver up to 520 megawatts to the electricity grid.

  10. Review and Approval of Nuclear Facility Safety Basis and Safety...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    104-2014, Review and Approval of Nuclear Facility Safety Basis and Safety Design Basis Documents by Website Administrator This Standard describes a framework and the criteria to be...

  11. Approval Memo for Administrative Changes - DOE Directives, Delegations,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Requirements Memo for Administrative Changes by Website Administrator Microsoft Word Document icon Approval-Memo-for-Administrative-Changes (1).doc - Microsoft Word Document, 14 KB (15104

  12. BLM Approves Salt Wells Geothermal Plant in Churchill County...

    Open Energy Info (EERE)

    Plant in Churchill County Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: BLM Approves Salt Wells Geothermal Plant in Churchill County Abstract...

  13. Y-12 Final Site-Wide Environmental Impact Statement Approved...

    National Nuclear Security Administration (NNSA)

    Blog Home Field Offices Welcome to the NNSA Production Office NPO News Releases Y-12 Final Site-Wide Environmental Impact Statement Approved Y-12 Final Site-Wide...

  14. $3 million approved for 2015 LANS Community Commitment Plan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    $3 million approved for 2015 LANS Community Commitment Plan Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue: September 1, 2016 all issues All Issues » submit $3 million approved for 2015 LANS Community Commitment Plan Education, economic development and community giving to receive $1 million each October 1, 2014 Elizabeth and Roger Inman of Purple Adobe Lavender Farm in Abiquiu. The company was one of the 2014 LANS Community Commitment

  15. Global Nuclear Energy Partnership Steering Group Members Approve

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transformation to the International Framework for Nuclear Energy Cooperation | Department of Energy Global Nuclear Energy Partnership Steering Group Members Approve Transformation to the International Framework for Nuclear Energy Cooperation Global Nuclear Energy Partnership Steering Group Members Approve Transformation to the International Framework for Nuclear Energy Cooperation June 21, 2010 - 11:59am Addthis The Global Nuclear Energy Partnership Steering Group met in Accra, Ghana on June

  16. Tribal Wind Farm Leases: Hearth Act versus BIA Approval

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tribal Wind Farm Leases Hearth Act Versus BIA Approval March 24, 2014 Mark Randall Developer PNE Wind USA DOE TEP Peer Review Meeting Chilocco Wind Fram Helping Expedite and Advance Responsible Tribal Home Ownership Tribes can develop and implement their own leasing regulations Tribal regs can include a tribal NEPA process Secretary must verify compliance before approval Federal permits are still required The HEARTH Act July 30 2012 ∗ Tribal regulation must provide the same protections that

  17. The AP1000{sup R} nuclear power plant innovative features for extended station blackout mitigation

    SciTech Connect (OSTI)

    Vereb, F.; Winters, J.; Schulz, T.; Cummins, E.; Oriani, L. [Westinghouse Electric Company LLC, 1000 Westinghouse Drive, Cranberry Township, PA 16066 (United States)

    2012-07-01

    Station Blackout (SBO) is defined as 'a condition wherein a nuclear power plant sustains a loss of all offsite electric power system concurrent with turbine trip and unavailability of all onsite emergency alternating current (AC) power system. Station blackout does not include the loss of available AC power to buses fed by station batteries through inverters or by alternate AC sources as defined in this section, nor does it assume a concurrent single failure or design basis accident...' in accordance with Reference 1. In this paper, the innovative features of the AP1000 plant design are described with their operation in the scenario of an extended station blackout event. General operation of the passive safety systems are described as well as the unique features which allow the AP1000 plant to cope for at least 7 days during station blackout. Points of emphasis will include: - Passive safety system operation during SBO - 'Fail-safe' nature of key passive safety system valves; automatically places the valve in a conservatively safe alignment even in case of multiple failures in all power supply systems, including normal AC and battery backup - Passive Spent Fuel Pool cooling and makeup water supply during SBO - Robustness of AP1000 plant due to the location of key systems, structures and components required for Safe Shutdown - Diverse means of supplying makeup water to the Passive Containment Cooling System (PCS) and the Spent Fuel Pool (SFP) through use of an engineered, safety-related piping interface and portable equipment, as well as with permanently installed onsite ancillary equipment. (authors)

  18. VERA Modeling and Simulation of the AP1000 PWR Cycle 1 Depletion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CASL-U-2015-0302-000 VERA Modeling and Simulation of the AP1000 PWR Cycle 1 Depletion L3:VMA.AMA.P11.06 David Salazar, Westinghouse Fausto Franceschini, Westinghouse September 30, 2015 L3:VMA.AMA.P11.06 Official Use Only ii Protected under CASL Master NDA CASL-U-2015-0302-000 REVISION LOG Revision Date Affected Pages Revision Description 0 09/30/2015 All Initial issuance Document pages that are: Export Controlled ____________No______________________________________ IP/Proprietary/NDA

  19. APS beamline standard components handbook, Version 1.3. Revision 1

    SciTech Connect (OSTI)

    Hahn, U.; Shu, D.; Kuzay, T.M.

    1993-02-01

    This Handbook in its current version (1.3) contains descriptions, specifications, and preliminary engineering design drawings for many of the standard components. The design status and schedules have been provided wherever possible. In the near future, the APS plans to update engineering drawings of identified standard beamline components and complete the Handbook. The completed version of this Handbook will become available to both the CATs and potential vendors. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction.

  20. 2011 APS-DPP Poster Session, Salt Lake City, UT | Princeton Plasma Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab APS-DPP Poster Session, Salt Lake City, UT View larger image DSCN 0030 View larger image DSCN 0031 View larger image DSCN 0032 View larger image DSCN 0033 View larger image DSCN 0035 View larger image DSCN 0037 View larger image DSCN 0039 View larger image DSCN 0040 View larger image DSCN 0041 View larger image DSCN 0042 View larger image DSCN 0043 View larger image DSCN 0045 View larger image DSCN 0047 View larger image DSCN 0049 View larger image DSCN 0050 View larger image DSCN 0051

  1. 2012 APS-DPP Plasma Science Expo, Providence, RI | Princeton Plasma Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab APS-DPP Plasma Science Expo, Providence, RI View larger image IMG 1847 View larger image IMG 1598 View larger image IMG 1608 View larger image IMG 1609 View larger image IMG 1614 View larger image IMG 1647 View larger image IMG 1650 View larger image IMG 1651 View larger image IMG 1657 View larger image IMG 1659 View larger image IMG 1662 View larger image IMG 1663 View larger image IMG 1664 View larger image IMG 1668 View larger image IMG 1672 View larger image IMG 1675 View larger

  2. Facility Clearance Program | National Nuclear Security Administration |

    National Nuclear Security Administration (NNSA)

    (NNSA) Facility Clearance Program The Facility Clearance (FCL) Program regulates DOE approval of a Federal or contractor facility's eligibility to access, receive, generate, reproduce, store, transmit, or destroy classified information or matter, special nuclear material (SNM), other hazardous material presenting a potential radiological, chemical, or biological sabotage threat, and/or DOE property of significant monetary value, exclusive of facilities and land values (hereinafter referred

  3. State Energy Efficiency Program Evaluation Inventory

    U.S. Energy Information Administration (EIA) Indexed Site

    State Energy Efficiency Program Evaluation Inventory July 2013 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | State Energy Efficiency Program Evaluation Inventory i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other

  4. Department of Energy Laboratory Accreditation Program for Radiobioassy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NOT MEASUREMENT SENSITIVE DOE-STD-1112-2016 June 2016 DOE STANDARD DEPARTMENT OF ENERGY LABORATORY ACCREDITATION PROGRAM FOR RADIOBIOASSAY U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1112-2016 This document is available on the Department of Energy Office of Environment, Health, Safety and Security Approved DOE Technical Standards Web Site at:

  5. HOWSE (HOt Water SAver) test program. Final report

    SciTech Connect (OSTI)

    Olson, W.R.

    1983-06-15

    The feasibility of recovering heat from a domestic dishwasher was demonstrated in a working, full scale model. That project showed it could be done. This test program showed the HOWSE to be effective and safe over a period of eighteen months. The data from the test program is essential to show safety for requesting approval for use of this appliance by building code authorities.

  6. Memorandum Approval of a Permanenet Variance Regarding Static Magnetic Fields at Brookhaven National Laboratory (Variance 1021)

    Broader source: Energy.gov [DOE]

    Approval of a Permanenet Variance Regarding Static Magnetic Fields at Brookhaven National Laboratory (Variance 1021)

  7. DOE-TSPP-6-2013, Approving and Issuing DOE Technical Standards

    Broader source: Energy.gov [DOE]

    This procedure provides guidance for approving and issuing the Department of Energy (DOE) Technical Standards.

  8. Layered Electrical Product Application Protocol (AP). Draft: Initial Graphics Exchange Specification (IGES)

    SciTech Connect (OSTI)

    Not Available

    1994-09-01

    An application protocol is an information systems engineering view of a specific product. The view represents an agreement on the generic activities needed to design and fabricate the product, the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transfering some or all of the information required. This applications protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining and exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format. The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.

  9. Analysis of N-16 concentration in primary cooling system of AP1000 power reactor

    SciTech Connect (OSTI)

    Rohanda, Anis; Waris, Abdul

    2015-04-16

    Nitrogen-16 (N-16) is one of the radiation safety parameter on the primary reactor system. The activation product, N-16, is the predominant contributor to the activity in the reactor coolant system during reactor operation. N-16 is activation product derived from activation of O-16 with fast neutron based on {sup 16}O(n,p){sup 16}N reaction. Thus study is needed and it performs to determine N-16 concentration in reactor coolant (primary coolant) in supporting radiation safety. One of the way is using analytical methode based on activation and redecay princip to obtain N-16 concentration. The analysis was performed on the configuration basis and operational of Westinghouse AP1000 power reactor in several monitoring points at coolant reactor system. The results of the calculation of N-16 concentration at the core outlet, reactor vessel outlet, pressurizer line, inlet and outlet of steam generators, primary pumps, reactor vessels inlet and core inlet are: 281, 257, 255, 250, 145, 142, 129 and 112 µCi/gram respectively. The results of analysis compared with AP1000 design control document as standard values. The verification showed very high accuracy comparation between analytical results and standard values.

  10. Open loop compensation for the eddy current effect in the APS storage ring vacuum chamber

    SciTech Connect (OSTI)

    Chung, Y.; Bridges, J.; Emery, L.; Decker, G.

    1991-01-01

    In the third generation synchrotron light sources, closed orbit stabilization against external vibrations is critical to ensure low emittance and high brightness. The Advanced Photon Source (APS) will use a large number (678) of correction magnets to create local bumps and to achieve global orbit stabilization. In this paper, we will present the result of the effort to counter the effect due to the finite inductance of the magnet and the eddy current in the 1/2 in.-thick aluminum storage ring vacuum chamber. The amplitude attenuation and the phase shift of the correction magnet field inside the APS storage ring vacuum chamber were measured. A circuit to compensate for this effect was then inserted between the signal source and the magnet power supply. The amplitude was restored with an error of less than 20% of the source signal amplitude and the phase shift was reduced from 80{degrees} to 12{degrees} at 10 Hz. Incorporation of this circuit in the closed loop feedback scheme and the resulting beneficial effect in the closed orbit stabilization will be discussed. 4 refs., 4 figs.

  11. Radiological Control Programs for Special Tritium Compounds

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE.F 1325.8 (08-93) United States Government Department of Energy memorandum DATE: May 11, 2006 REPLY TO EH-52:JRabovsky:3-2 135 ATTN OF: APPROVAL OF CHANGE NOTICE 1 TO DEPARTMENT OF ENERGY (DOE) SUBJECT. HANDBOOK 1184-2004, RADIOLOGICAL CONTROL PROGRAMS FOR SPECIAL TRITIUM COMPOUNDS TO: Dennis Kubicki, EH-24 Technical Standards Manager This memorandum forwards the subject Change Notice 1 to DOE Handbook, DOE- HDBK- 1184-2004, which has approved for publication and distribution. The change to

  12. The non-competitive acetylcholinesterase inhibitor APS12-2 is a potent antagonist of skeletal muscle nicotinic acetylcholine receptors

    SciTech Connect (OSTI)

    Grandič, Marjana; Aráoz, Romulo; Molgó, Jordi; Turk, Tom; Sepčić, Kristina; Benoit, Evelyne; Frangež, Robert

    2012-12-01

    APS12-2, a non-competitive acetylcholinesterase inhibitor, is one of the synthetic analogs of polymeric alkylpyridinium salts (poly-APS) isolated from the marine sponge Reniera sarai. In the present work the effects of APS12-2 were studied on isolated mouse phrenic nerve–hemidiaphragm muscle preparations, using twitch tension measurements and electrophysiological recordings. APS12-2 in a concentration-dependent manner blocked nerve-evoked isometric muscle contraction (IC{sub 50} = 0.74 μM), without affecting directly-elicited twitch tension up to 2.72 μM. The compound (0.007–3.40 μM) decreased the amplitude of miniature endplate potentials until a complete block by concentrations higher than 0.68 μM, without affecting their frequency. Full size endplate potentials, recorded after blocking voltage-gated muscle sodium channels, were inhibited by APS12-2 in a concentration-dependent manner (IC{sub 50} = 0.36 μM) without significant change in the resting membrane potential of the muscle fibers up to 3.40 μM. The compound also blocked acetylcholine-evoked inward currents in Xenopus oocytes in which Torpedo (α1{sub 2}β1γδ) muscle-type nicotinic acetylcholine receptors (nAChRs) have been incorporated (IC{sub 50} = 0.0005 μM), indicating a higher affinity of the compound for Torpedo (α1{sub 2}β1γδ) than for the mouse (α1{sub 2}β1γε) nAChR. Our data show for the first time that APS12-2 blocks neuromuscular transmission by a non-depolarizing mechanism through an action on postsynaptic nAChRs of the skeletal neuromuscular junction. -- Highlights: ► APS12-2 produces concentration-dependent inhibition of nerve-evoked muscle contraction in vitro. ► APS12-2 blocks MEPPs and EPPs at the neuromuscular junction. APS12-2 blocks ACh-activated current in Xenopus oocytes incorporated with Torpedo nAChRs.

  13. DOE/OR/20722-41 Formerly Utilized Sites Remedial Action Program...

    Office of Legacy Management (LM)

    I'a contamination, at concentrations in excess of DOE-approved 3I limits, remains from the early years of the U.S. atomic energy program. The residential properties were suspected ...

  14. DOE/OR/20722-40 Formerly Utilized Sites Remedial Action Program...

    Office of Legacy Management (LM)

    of DOE-approved limits, remains from the early years of the U.S. atomic energy program. The residential properties were suspected of being radioactively contaminated since they ...

  15. DOE/OR/20722-37 Formerly Utilized Sites Remedial Action Program...

    Office of Legacy Management (LM)

    of DOE-approved limits, remains from the early years of the U.S. atomic energy program. The residential properties were suspected of being radioactively contaminated since they ...

  16. DOE/OR/20722-39 Formerly Utilized Sites Remedial Action Program...

    Office of Legacy Management (LM)

    of DOE-approved limits, remains from the early years of the U.S. atomic energy program. The residential properties were suspected of being j ; *radioactively contaminated since ...

  17. DOE/OR/20722-34 Formerly Utilized Sites Remedial Action Program...

    Office of Legacy Management (LM)

    of DOE-approved limits, remains from the early years of the U.S. atomic energy program. The residential properties were suspected of being radioactively contaminated since they ...

  18. DOE/OR/20722-42 Formerly Utilized Sites Remedial Action Program...

    Office of Legacy Management (LM)

    of DOE-approved limits, remains from the early years of the U.S. atomic energy program. The residential properties were suspected of being 3l radioactively contaminated since ...

  19. DOE/OR/20722-38 Formerly Utilized Sites Remedial Action Program...

    Office of Legacy Management (LM)

    of DOE-approved limits, remains from the early years of the U.S. atomic energy program. The residential properties were suspected of being 5* radioactively contaminated since ...

  20. SEP Program Planning Template ("Program Planning Template") ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEP Program Planning Template ("Program Planning Template") SEP Program Planning Template ("Program Planning Template") Program Planning Template More Documents & Publications...

  1. Program Evaluation: Program Life Cycle

    Broader source: Energy.gov [DOE]

    In general, different types of evaluation are carried out over different parts of a program's life cycle (e.g., Creating a program, Program is underway, or Closing out or end of program)....

  2. RH Packaging Program Guidance

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2008-01-12

    The purpose of this program guidance document is to provide the technical requirements for use, operation, inspection, and maintenance of the RH-TRU 72-B Waste Shipping Package (also known as the "RH-TRU 72-B cask") and directly related components. This document complies with the requirements as specified in the RH-TRU 72-B Safety Analysis Report for Packaging (SARP), and Nuclear Regulatory Commission (NRC) Certificate of Compliance (C of C) 9212. If there is a conflict between this document and the SARP and/or C of C, the C of C shall govern. The C of C states: "...each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." It further states: "...each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP tasks the Waste Isolation Pilot Plant (WIPP) Management and Operating (M&O) Contractor with assuring the packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8, "Deliberate Misconduct." Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the U.S. Department of Energy (DOE) Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.In accordance with 10 CFR Part 71, "Packaging and Transportation of Radioactive Material," certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21, "Reporting of Defects and Noncompliance," regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a

  3. RH Packaging Program Guidance

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2006-11-07

    The purpose of this program guidance document is to provide the technical requirements for use, operation, inspection, and maintenance of the RH-TRU 72-B Waste Shipping Package and directly related components. This document complies with the requirements as specified in the RH-TRU 72-B Safety Analysis Report for Packaging (SARP), and Nuclear Regulatory Commission (NRC) Certificate of Compliance (C of C) 9212. If there is a conflict between this document and the SARP and/or C of C, the C of C shall govern. The C of C states: "...each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." It further states: "...each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP tasks the Waste Isolation Pilot Plant (WIPP) Management and Operating (M&O) Contractor with assuring the packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with 10 Code of Federal Regulations (CFR) 71.8, "Deliberate Misconduct." Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the U.S. Department of Energy (DOE) Carlsbad Field Office (CBFO) shall be notified immediately. CBFO will evaluate the issue and notify the NRC if required. In accordance with 10 CFR Part 71, "Packaging and Transportation of Radioactive Material," certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21, "Reporting of Defects and Noncompliance," regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these

  4. Health, Safety & Environment System Description and Worker Safety & Health Program

    National Nuclear Security Administration (NNSA)

    FY2015 HEALTH, SAFETY AND ENVIRONMENT MANAGEMENT SYSTEM DESCRIPTION and WORKER SAFETY & HEALTH PROGRAM Honeywell Federal Manufacturing & Technologies HS&E Management System Description 1 Honeywell Approval: KCFO Approval: Original Signed by Don Fitzpatrick 8/27/14 Original Signed by Sherry Kinsey-Cannon 8/27/14 Donald J. Fitzpatrick, Director Date Sherry Kinsey-Cannon, Date HSE&F Acting Assistant Manager Office of Operations KCFO Worker Safety & Health Program 2 Honeywell

  5. Analysis of large scale tests for AP-600 passive containment cooling system

    SciTech Connect (OSTI)

    Sha, W.T.; Chien, T.H.; Sun, J.G.; Chao, B.T.

    1997-07-01

    One unique feature of the AP-600 is its passive containment cooling system (PCCS), which is designed to maintain containment pressure below the design limit for 72 hours without action by the reactor operator. During a design-basis accident, i.e., either a loss-of-coolant or a main steam-line break accident, steam escapes and comes in contact with the much cooler containment vessel wall. Heat is transferred to the inside surface of the steel containment wall by convection and condensation of steam and through the containment steel wall by conduction. Heat is then transferred from the outside of the containment surface by heating and evaporation of a thin liquid film that is formed by applying water at the top of the containment vessel dome. Air in the annual space is heated by both convection and injection of steam from the evaporating liquid film. The heated air and vapor rise as a result of natural circulation and exit the shield building through the outlets above the containment shell. All of the analytical models that are developed for and used in the COMMIX-ID code for predicting performance of the PCCS will be described. These models cover governing conservation equations for multicomponents single phase flow, transport equations for the {kappa}-{epsilon} two-equation turbulence model, auxiliary equations, liquid-film tracking model for both inside (condensate) and outside (evaporating liquid film) surfaces of the containment vessel wall, thermal coupling between flow domains inside and outside the containment vessel, and heat and mass transfer models. Various key parameters of the COMMIX-ID results and corresponding AP-600 PCCS experimental data are compared and the agreement is good. Significant findings from this study are summarized.

  6. Chemical Management (Volume 3 of 3), Approval Memorandum

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    De part m e n t of En erg y memorandum DATE: REPLY T O ATTN OF: SUBJECT: TO: April 5, 2005 EH-52:Dan Marsick:3-3954 APPROVAL OF DEPARTMENT OF ENERGY (DOE) CHEMICAL MANAGEMENT HANDBOOK VOLUME 3 Dennis Kubicki, EH-24 This memorandum forwards the subject DOE technical standard, DOE-HDBK-1139/3-2004 which has been approved for publication and distribution. This standard was reviewed by the Cognizant Secretarial Officer organizations and Operations Offices through a formal coordination process and

  7. Criteria for Evaluation of Nuclear Facility Training Programs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reaffirmed June 2013 DOE STANDARD CRITERIA FOR EVALUATION OF NUCLEAR FACILITY TRAINING PROGRAMS (Formerly Titled: Guidelines for Evaluation of Nuclear Facility Training Programs) U.S. Department of Energy FSC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TS DOE HDBK-1070-94 Errata June 2013 Table of Changes Page/Section Change Cover Criteria for Evaluation of Nuclear Facility Training Programs Page ii This document is available on the

  8. Criteria for Evaluation of Nuclear Facility Training Programs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reaffirmed July 2014 DOE STANDARD CRITERIA FOR EVALUATION OF NUCLEAR FACILITY TRAINING PROGRAMS (Formerly Titled: Guidelines for Evaluation of Nuclear Facility Training Programs) U.S. Department of Energy FSC-6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TS DOE-STD-1070-94 This document is available on the Department of Energy Technical Standards Program Web page at http://www.hss.doe.gov/nuclearsafety/ns/techstds/ DOE-STD-1070-94

  9. Department of Energy Technical Standards Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Technical Standards Program Department of Energy Technical Standards Program The DOE Technical Standards Program promotes the use of voluntary consensus standards at DOE, manages and facilitates DOE's efforts to develop and maintain necessary technical standards, and communicates information on technical standards activities to people who develop or use technical standards in DOE. Online Standards Approved DOE Technical Standards DOE Technical Standards Archive Monthly

  10. Crosswalk of DOE-STD-1104 Bases of Approval | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Crosswalk of DOE-STD-1104 Bases of Approval Crosswalk of DOE-STD-1104 Bases of Approval February 4, 2015 DOE-STD-1104-2009 to DOE-STD-1104-2014 Bases of Approval Crosswalk for Safety Basis Documents. This document provides a crosswalk of Bases of Approval of DOE-STD-1104-2009 by Document / Section and Page # to the Bases of Approval for DOE-STD-1104-2014. Crosswalk of DOE-STD-1104 Bases of Approval (297.29 KB) More Documents & Publications Requirements Crosswalk of DOE-STD-1104-2014

  11. Facility Approvals, Security Surveys, and Nuclear Materials Surveys

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1992-09-15

    To establish Department of Energy (DOE) requirements for granting facility approvals prior to permitting safeguards and security interests on the premises and the conduct of insite security and/or nuclear material surveys of facilities with safeguards and security interests. Cancels DOE 5634.1A. Canceled by DOE O 470.1 dated 9-28-95.

  12. Facility Approvals, Security Surveys, and Nuclear Materials Surveys

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1988-02-03

    To establish the Department of Energy (DOE) requirements for granting facility approvals prior to permitting safeguards and security interests on the premises and the conduct of on-site security and/or nuclear material surveys of facilities with safeguards and security interests. Cancels DOE O 5630.7 and DOE O 5634.1. Canceled by DOE 5634.1B.

  13. Program Administration

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-08-21

    This volume describes program administration that establishes and maintains effective organizational management and control of the emergency management program. Canceled by DOE G 151.1-3.

  14. Weatherization Program

    Broader source: Energy.gov [DOE]

    Residences participating in the Home Energy Rebate or New Home Rebate Program may not also participate in the Weatherization Program

  15. NUCKS1 is a novel RAD51AP1 paralog important for homologous recombination and genome stability

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Parplys, Ann C.; Zhao, Weixing; Sharma, Neelam; Groesser, Torsten; Liang, Fengshan; Maranon, David G.; Leung, Stanley G.; Grundt, Kirsten; Dray, Eloïse; Idate, Rupa; et al

    2015-08-31

    NUCKS1 (nuclear casein kinase and cyclin-dependent kinase substrate 1) is a 27 kD chromosomal, vertebrate-specific protein, for which limited functional data exist. Here, we demonstrate that NUCKS1 shares extensive sequence homology with RAD51AP1 (RAD51 associated protein 1), suggesting that these two proteins are paralogs. Similar to the phenotypic effects of RAD51AP1 knockdown, we find that depletion of NUCKS1 in human cells impairs DNA repair by homologous recombination (HR) and chromosome stability. Depletion of NUCKS1 also results in greatly increased cellular sensitivity to mitomycin C (MMC), and in increased levels of spontaneous and MMC-induced chromatid breaks. NUCKS1 is critical to maintainingmore » wild type HR capacity, and, as observed for a number of proteins involved in the HR pathway, functional loss of NUCKS1 leads to a slow down in DNA replication fork progression with a concomitant increase in the utilization of new replication origins. Interestingly, recombinant NUCKS1 shares the same DNA binding preference as RAD51AP1, but binds to DNA with reduced affinity when compared to RAD51AP1. Finally, our results show that NUCKS1 is a chromatin-associated protein with a role in the DNA damage response and in HR, a DNA repair pathway critical for tumor suppression.« less

  16. Argonne National Laboratory Internal Appraisal Program environment, safety, health/quality assurance oversight

    SciTech Connect (OSTI)

    Winner, G.L.; Siegfried, Y.S.; Forst, S.P.; Meshenberg, M.J.

    1995-06-01

    Argonne National Laboratory`s Internal Appraisal Program has developed a quality assurance team member training program. This program has been developed to provide training to non-quality assurance professionals. Upon successful completion of this training and approval of the Internal Appraisal Program Manager, these personnel are considered qualified to assist in the conduct of quality assurance assessments. The training program has been incorporated into a self-paced, computerized, training session.

  17. Visiting Faculty Program Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visiting Faculty Program Program Description The Visiting Faculty Program seeks to increase the research competitiveness of faculty members and their students at institutions historically underrepresented in the research community in order to expand the workforce vital to Department of Energy mission areas. As part of the program, selected university/college faculty members collaborate with DOE laboratory research staff on a research project of mutual interest. Program Objective The program is

  18. Three-dimensional analysis of AP600 standard plant shield building roof

    SciTech Connect (OSTI)

    Greimann, L.; Fanous, F.; Safar, S.; Khalil, A.; Bluhm, D.

    1999-06-01

    The AP600 passive containment vessel is surrounded by a concrete cylindrical shell covered with a truncated conical roof. This roof supports the passive containment cooling system (PCS) annular tank, shield plate and other nonstructural attachments. When the shield building is subjected to different loading combinations as defined in the Standard Review Plan (SRP), some of the sections in the shield building could experience forces in excess of their design values. This report summarized the three-dimensional finite element analysis that was conducted to review the adequacy of the proposed Westinghouse shield building design. The ANSYS finite element software was utilized to analyze the Shield Building Roof (SBR) under dead, snow, wind, thermal and seismic loadings. A three-dimensional model that included a portion of the shield building cylindrical shell, the conical roof and its attachments, the eccentricities at the cone-cylinder connection and at the compression ring and the PCS tank was developed. Mesh sensitivity studies were conducted to select appropriate element size in the cylinder, cone, near air intakes and in the vicinity of the eccentricities. Also, a study was carried out to correctly idealize the water-structure interaction in the PCS tank. Response spectrum analysis was used to calculate the internal forces at different sections in the SBR under Safe Shutdown Earthquake (SSE). Forty-nine structural modes and twenty sloshing modes were used. Two horizontal components of the SSE together with a vertical component were used. Modal stress resultants were combined taking into account the effects of closely spaced modes. The three earthquake directions were combined by the Square Root of the Sum Squares method. Two load combinations were studied. The load combination that included dead, snow, fluid, thermal and seismic loads was selected to be the most critical. Interaction diagrams for critical sections were developed and used to check the design

  19. Visiting Faculty Program Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    covers stipend and travel reimbursement for the 10-week program. Teacherfaculty participants: 1 Program Coordinator: Scott Robbins Email: srobbins@lanl.gov Phone number: 663-5621...

  20. SEP Request for Approval Form 1 - Modeling of Data at Finer Intervals...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEP Request for Approval Form 1 - Modeling of Data at Finer Intervals than Weekly File SEP-Request-for-Approval-Form-1Modeling-of-Data-at-Finer-Intervals-than-Weekly.docx More ...

  1. FDA Approves Drug for Type 2 Diabetes Invented with Aid of Protein...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FDA Approves Drug for Type 2 Diabetes Invented with Aid of Protein Structure Data Taken at ALS FDA Approves Drug for Type 2 Diabetes Invented with Aid of Protein Structure Data...

  2. WPN 00-5: Approval of Replacement Refrigerators and Electric Water Heaters

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    as Allowable Weatherization Measures | Department of Energy 0-5: Approval of Replacement Refrigerators and Electric Water Heaters as Allowable Weatherization Measures WPN 00-5: Approval of Replacement Refrigerators and Electric Water Heaters as Allowable Weatherization Measures Effective: Oct. 6, 2000 Provides states with the approval to include refrigerator and electric water heater replacements as an allowable measure. WPN 00-5: Approval of Replacement Refrigerators and Electric Water

  3. Community Programs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Community Programs Community Environmental Documents Tours Community Programs Friends of Berkeley Lab ⇒ Navigate Section Community Environmental Documents Tours Community Programs Friends of Berkeley Lab Community Education Programs Workforce Development & Education As part of the Lab's education mission to inspire and prepare the next generation of scientists and engineers, the Workforce Development & Education runs numerous education programs for all ages of students-from elementary

  4. Condensation in the presence of noncondensible gases: AP600 containment simulation

    SciTech Connect (OSTI)

    Anderson, M.H.; Corradini, M.L.

    1995-09-01

    The Westinghouse Electric Corporation has designed an advanced pressurized light water reactor, AP600. This reactor is designed with a passive cooling system to remove sensible and decay heat from the containment. The heat removal path involves condensation heat transfer, aided by natural convective forces generated by buoyancy effects. A one-twelfth scale rectangular slice of the proposed reactor containment was constructed at the University of Wisconsin to simulate conditions anticipated from transients and accidents that may occur in a full scale containment vessel under a variety of conditions. Similitude of the test facility was obtained by considering the appropriate dimensionless group for the natural convective process (modified Froude number) and the aspect ratio (H/R) of the containment vessel. An experimental investigation to determine the heat transfer coefficients associated with condensation on a vertical and horizontal cooled wall (located in the scaled test section) at several different inlet steam flow rates and test section temperatures was conducted. In this series of experiments, the non-condensible mass fraction varied between (0.9-0.4) with corresponding mixture temperatures between 60-90{degrees}C. The heat transfer coefficients of the top horizontal surface varied from (82-296)W/m{sup 2}K and the vertical side heat transfer coefficients varied form (70-269)m{sup 2}K. The results were then compared to boundary layer heat and mass transfer theory by the use of the McAdams correlation for free convection.

  5. Constant-current charging supplies for the Advanced Photon Source (APS) linear accelerator modulators

    SciTech Connect (OSTI)

    Fuja, R.; Grelick, A.E.; Meyer, D.

    1997-06-01

    The APS linac beam energy must be stable to within {+-}1% to match the energy acceptance of the positron accumulator ring. The klystron pulse modulators must therefore provide a pulse-to-pulse repeatability of 0.1% in order for the beam to have the required energy stability. The modulators have had difficulty achieving the necessary repeatability since the pulse forming network (PFN) charging scheme does not include a deQing circuit. Several of the major charging circuit components are also less reliable than desired. In order to increase operating reliability and to improve pulse-to-pulse stability, it is planned to replace the high voltage power supplies in all modulators with constant-current power supplies. A new modulator charging supply that contains two EMI series 303 constant-current power supplies was constructed. Each of these EMI supplies delivers 1.5 A at up to 40 kV. One supply is sufficient for linac operation at up to 45 Hz, and two supplies in parallel enable linac operation at the nominal rf repetition rate of 60 Hz. This paper discusses test results from the new modulator, and also describes the existing modulators and their performance limitations.

  6. A linear MOSFET regulator for improving performance of the booster ramping power supplies at the APS.

    SciTech Connect (OSTI)

    Feng, G.; Deriy, B.; Wang, J.; Accelerator Systems Division

    2008-01-01

    The APS booster ring uses ramping power supplies to power the sextupole, quadrupole, and dipole magnets as the beam energy ramps up linearly to 7 GeV. Due to the circuit topology used, those supplies are unable to follow the linear ramp to the desired accuracy. The best regulation achieved is 0.25% while 0.1% is desired. In addition to the unsatisfying regulation, those supplies are sensitive to AC line perturbation and are not able to reject AC line noises of more than a few tens of hertz. To improve the performance, a linear MOSFET regulation system using paralleled MOSFET devices in series with the power supply is proposed. The system uses a realtime current feedback loop to force the MOSFETs to work in the linear operation mode. By using this linear MOSFET regulator, the voltage drop on MOSFETs, and hence the voltage imposed on magnets, can be regulated very quickly. As a result, the regulation of the magnet current can be improved significantly. So far the simulation results show that with the linear regulator, the current regulation can be improved to better than 0.1%. Because of the high bandwidth of the linear regulator, it can reduce the harmonic content in the output current as well as reject the AC line disturbance. This paper discusses the circuit topology, the regulation method, and the simulation results.

  7. SP-100 Program: space reactor system and subsystem investigations

    SciTech Connect (OSTI)

    Harty, R.B.

    1983-09-30

    For a space reactor power system, a comprehensive safety program will be required to assure that no undue risk is present. This report summarizes the nuclear safety review/approval process that will be required for a space reactor system. The documentation requirements are presented along with a summary of the required contents of key documents. Finally, the aerospace safety program conducted for the SNAP-10A reactor system is summarized. The results of this program are presented to show the type of program that can be expected and to provide information that could be usable in future programs.

  8. PP Approval Memo from Patricia Worthington | Department of Energy

    Office of Environmental Management (EM)

    Voluntary Protection Program Onsite Review, Facility Engineering Services KCP, LLC - November 2008 Voluntary Protection Program Onsite Review, Fluor Hanford SAS - February 2008...

  9. sup 1 H and sup 31 P-NMR assignments of the non-exchangeable protons of the consensus acceptor exon:intron junction d(CpTpApCpApGpGpT)

    SciTech Connect (OSTI)

    Lown, J.W.; Chang, D.K.; Debart, F.; Rayner, B.; Imbach, J.L. )

    1986-06-01

    The consensus acceptor exon:intron junction d(CpTpApCpApGpGpT) has been synthesized by a modified phosphotriester method. The non-self complementary octamer exists in the single strand form in aqueous buffer at 20 degrees C as evidenced by temperature variable {sup 1}H-NMR and NOE measurements. The non-exchangeable proton assignments were secured using a combination of techniques including two-dimensional COSY, NOESY and the double quantum technique {sup 1}H-{sup 1}H-INADEQUATE as well as inversion recovery T1 experiments. The new technique of {sup 31}P-1H shift correlation is particularly valuable in removing certain ambiguities in the sugar proton assignments. Characteristic chemical shifts for the base protons which are determined by their immediate molecular environments are also useful in assignments. The consensus acceptor exon:intron junction adopts a random coil conformation in solution under the experimental conditions employed.

  10. Rotary mode core sampling approved checklist: 241-TX-113

    SciTech Connect (OSTI)

    Fowler, K.D.

    1998-08-03

    The safety assessment for rotary mode core sampling was developed using certain bounding assumptions, however, those assumptions were not verified for each of the existing or potential flammable gas tanks. Therefore, a Flammable Gas/Rotary Mode Core Sampling Approved Checklist has been completed for tank 241-TX-113 prior to sampling operations. This transmittal documents the dispositions of the checklist items from the safety assessment.

  11. Rotary mode core sampling approved checklist: 241-TX-116

    SciTech Connect (OSTI)

    FOWLER, K.D.

    1999-02-24

    The safety assessment for rotary mode core sampling was developed using certain bounding assumptions, however, those assumptions were not verified for each of the existing or potential flammable gas tanks. Therefore, a Flammable Gas/Rotary Mode Core Sampling Approved Checklist has been completed for tank 241-TX-116 prior to sampling operations. This transmittal documents the dispositions of the checklist items from the safety assessment.

  12. Microsoft Word - Short Form CRADA Agreement Boilerplate Approved June 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    agreement, which is uniform across the Departmental facilities, for small value transactions. Except for minor modifications to the terms of this agreement made by CONTRACTOR, most changes will require approval by the DOE Contracting Officer, WHICH WILL LIKELY DELAY THE START DATE OF THE PROJECT. If substantive changes are required, the DOE Model CRADA may be more appropriate due to the increased flexibility such agreements afford. STEVENSON-WYDLER (15 U.S.C. 3710a) SHORT FORM COOPERATIVE

  13. Light Water Reactor Sustainability Program - Integrated Program...

    Office of Environmental Management (EM)

    Program - Integrated Program Plan Light Water Reactor Sustainability Program - Integrated Program Plan The Light Water Reactor Sustainability (LWRS) Program is a research and ...

  14. DOE LABORATORY OPEN SOURCE SOFTWARE: ADVANCE DOE PROGRAM Approval and other oss Licensing Issues

    Broader source: Energy.gov [DOE]

    On Feb 1, 2002, DOE Patent Counsel issued an IPI-II-1-01 for "Development and Use of Open Source Software."

  15. CH Packaging Program Guidance

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2005-02-28

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: "each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." They further state: "each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP charges the Waste Isolation Pilot Plant (WIPP) management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.

  16. CH Packaging Program Guidance

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2003-04-30

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: ''each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application.'' They further state: ''each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application.'' Chapter 9.0 of the SARP charges the WIPP management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with 10 CFR 71.11. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. CBFO will evaluate the issue and notify the NRC if required. This document provides the instructions to be followed to operate, maintain, and test the TRUPACT-II and HalfPACT packaging. The intent of these instructions is to standardize operations. All users will follow these instructions or equivalent instructions that assure operations are safe and meet the requirements of the SARPs.

  17. CH Packaging Program Guidance

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2002-03-04

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT Shipping Package, and directly related components. This document complies with the minimum requirements as specified in TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event there is a conflict between this document and the SARP or C of C, the SARP and/or C of C shall govern. C of Cs state: ''each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application.'' They further state: ''each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application.'' Chapter 9.0 of the SAR P charges the WIPP Management and Operation (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with 10 CFR 71.11. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. CBFO will evaluate the issue and notify the NRC if required. This document details the instructions to be followed to operate, maintain, and test the TRUPACT-II and HalfPACT packaging. The intent of these instructions is to standardize these operations. All users will follow these instructions or equivalent instructions that assure operations are safe and meet the requirements of the SARPs.

  18. Alternative Fuels Data Center: E15 Approved for Use in 2001 and Newer

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Vehicles E15 Approved for Use in 2001 and Newer Vehicles to someone by E-mail Share Alternative Fuels Data Center: E15 Approved for Use in 2001 and Newer Vehicles on Facebook Tweet about Alternative Fuels Data Center: E15 Approved for Use in 2001 and Newer Vehicles on Twitter Bookmark Alternative Fuels Data Center: E15 Approved for Use in 2001 and Newer Vehicles on Google Bookmark Alternative Fuels Data Center: E15 Approved for Use in 2001 and Newer Vehicles on Delicious Rank Alternative

  19. Attachment I: Approval of Agreement-in-Principal with the State of Alaska |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy I: Approval of Agreement-in-Principal with the State of Alaska Attachment I: Approval of Agreement-in-Principal with the State of Alaska US Department of Energy Memorandum DATE: January 31, 1995 REPLY TO ATTN OF: EM-22 (C. Smoot, 202/586-2352) SUBJECT: Approval of Agreement-in-Principle with the State of Alaska TO: Manager, Nevada Operations Office Thank you for providing the draft Agreement-in-Principle with the State of Alaska for review and approval. I approve the

  20. Boildown Study on Supernatant Liquid Retrieved from AP-107 in May 2010

    SciTech Connect (OSTI)

    Callaway, W. S.; Page, J. S.

    2013-02-12

    A boildown study was completed on a composite prepared from supernatant liquid grab samples retrieved from tank 241-AP-107 in May of 2010. The composite was a clear, yellow liquid containing no visible solids at hot cell ambient temperatures (25-27 °C). The density of the test composite was 1.216 g/mL at 26.8 °C. The boiling temperature curves generated at three reduced pressures—40-, 60-, and 80 Torr—displayed steadily increasing boiling temperatures with increasing volume reduction with no significant discontinuities. Only minimal foaming was observed after the volume reduction proceeded beyond 50 %WVR (percent waste volume reduction). The bulk densities (D{sub Bulk}{sup 18 °C}) and quantities of settled and centrifuged solids present were measured on samples of the boildown concentrates that were kept at 18 °C for 7-8 days. Estimated values of the bulk densities of the concentrates at 60-Torr boiling temperatures (D{sub Bulk}{sup 60 Torr}) were also calculated. Solids were observed in all boildown concentrates at process temperatures, at hot cell ambient temperatures (25-27 °C), and at 18 °C. The quantity of solids found in the cooled concentrates increased slowly through 50.2 %WVR. The quantity of solids found in concentrates after 54.0 %WVR was noticeably greater. Beyond 54.0 %WVR, the quantity of solids found in cooled concentrates increased dramatically. Analysis of boildown test samples indicated that sodium oxalate and sodium carbonate solids form in cooled concentrates after volume reduction of 8.4 %WVR or less. The major contributors to the large increase in the quantity of solids found in concentrates after 54 %WVR were sodium nitrate and sodium carbonate.

  1. Dose calculations using MARS for Bremsstrahlung beam stops and collimators in APS beamline stations.

    SciTech Connect (OSTI)

    Dooling, J.; Accelerator Systems Division

    2010-11-01

    The Monte Carlo radiation transport code MARS is used to model the generation of gas bremsstrahlung (GB) radiation from 7-GeV electrons which scatter from residual gas atoms in undulator straight sections within the Advanced Photon Source (APS) storage ring. Additionally, MARS is employed to model the interactions of the GB radiation with components along the x-ray beamlines and then determine the expected radiation dose-rates that result. In this manner, MARS can be used to assess the adequacy of existing shielding or the specifications for new shielding when required. The GB radiation generated in the 'thin-target' of an ID straight section will consist only of photons in a 1/E-distribution up to the full energy of the stored electron beam. Using this analytical model, the predicted GB power for a typical APS 15.38-m insertion device (ID) straight section is 4.59 x 10{sup -7} W/nTorr/mA, assuming a background gas composed of air (Z{sub eff} = 7.31) at room temperature (293K). The total GB power provides a useful benchmark for comparisons between analytical and numerical approaches. We find good agreement between MARS and analytical estimates for total GB power. The extended straight section 'target' creates a radial profile of GB, which is highly peaked centered on the electron beam. The GB distribution reflects the size of the electron beam that creates the radiation. Optimizing the performance of MARS in terms of CPU time per incident trajectory requires the use of a relatively short, high-density gas target (air); in this report, the target density is {rho}L = 2.89 x 10{sup -2} g/cm{sup 2} over a length of 24 cm. MARS results are compared with the contact dose levels reported in TB-20, which used EGS4 for radiation transport simulations. Maximum dose-rates in 1 cc of tissue phantom form the initial basis for comparison. MARS and EGS4 results are approximately the same for maximum 1-cc dose-rates and attenuation in the photon-dominated regions; for thicker

  2. Retiree Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Library Services » Retiree Program Retiree Program The Research Library offers a 1 year library card to retired LANL employees that allows usage of Library materials. This service is only available to retired LANL employees. Who is eligible? Any Laboratory retiree, not participating in any other program (ie, Guest Scientist, Affiliate). Upon completion of your application, you will be notified of your acceptance into the program. This does not include past students. What is the term of the

  3. HVAC Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Commercial Program Development Commercial Current Promotions Industrial Federal Agriculture Heating Ventilation and Air Conditioning Energy efficient Heating Ventilation and...

  4. RELATIVISTIC SUPERNOVAE HAVE SHORTER-LIVED CENTRAL ENGINES OR MORE EXTENDED PROGENITORS: THE CASE OF SN 2012ap

    SciTech Connect (OSTI)

    Margutti, R.; Milisavljevic, D.; Soderberg, A. M.; Sanders, N.; Chakraborti, S.; Kamble, A.; Drout, M.; Parrent, J.; Zauderer, A.; Guidorzi, C.; Morsony, B. J.; Ray, A.; Chomiuk, L.

    2014-12-20

    Deep, late-time X-ray observations of the relativistic, engine-driven, type Ic SN 2012ap allow us to probe the nearby environment of the explosion and reveal the unique properties of relativistic supernova explosions (SNe). We find that on a local scale of ∼0.01 pc the environment was shaped directly by the evolution of the progenitor star with a pre-explosion mass-loss rate of M-dot <5×10{sup −6} M{sub ⊙} yr{sup −1}, in line with gamma-ray bursts (GRBs) and the other relativistic SN 2009bb. Like sub-energetic GRBs, SN 2012ap is characterized by a bright radio emission and evidence for mildly relativistic ejecta. However, its late-time (δt ≈ 20 days) X-ray emission is ∼100 times fainter than the faintest sub-energetic GRB at the same epoch, with no evidence for late-time central engine activity. These results support theoretical proposals that link relativistic SNe like 2009bb and 2012ap with the weakest observed engine-driven explosions, where the jet barely fails to break out. Furthermore, our observations demonstrate that the difference between relativistic SNe and sub-energetic GRBs is intrinsic and not due to line-of-sight effects. This phenomenology can either be due to an intrinsically shorter-lived engine or to a more extended progenitor in relativistic SNe.

  5. Confined space entry program for the Westinghouse Hanford Company

    SciTech Connect (OSTI)

    Cornell, T.M.

    1993-11-01

    To comply with anticipated OSHA regulatory requirements concerning Permit-Required Confined Spaces, Westinghouse Hanford Company (WHC) created a Confined Spaces Task Team. The primary focus of the task team was to prepare a formal Confined Space Entry (CSE) Program that would ensure full compliance with the anticipated OSHA requirements. A comprehensive training plan was also prepared and submitted for approval as soon as the new CSE Program was approved and released for implementation. On January 14, 1993, OSHA released their final ruling which contained several further changes, requiring the WHC Confined Space Entry Program and Training Plan to be revised. The revised training manual and lessons learned in establishing a Confined Space Entry Program are presented.

  6. DOE Manual - Advisory Committee Management Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MANUAL DOE M 515.1-1 Approved: 10-22-07 ADVISORY COMMITTEE MANAGEMENT PROGRAM U.S. DEPARTMENT OF ENERGY Office of Management AVAILABLE ONLINE AT: INITIATED BY: www.directives.doe.gov Office of Management i DOE M 515.1-1 10-22-07 ADVISORY COMMITTEE MANAGEMENT PROGRAM 1. PURPOSE. This Manual supplements the Federal Advisory Committee Act (FACA), Title 5 United States Code (U.S.C.), Appendix 2, as amended, and the General Services Administration's (GSA's) final rule "Federal Advisory Committee

  7. Nevada Test Site Radiation Protection Program

    SciTech Connect (OSTI)

    Radiological Control Managers' Council, Nevada Test Site

    2007-08-09

    Title 10 Code of Federal Regulations (CFR) 835, 'Occupational Radiation Protection', establishes radiation protection standards, limits, and program requirements for protecting individuals from ionizing radiation resulting from the conduct of U.S. Department of Energy (DOE) activities. 10 CFR 835.101(a) mandates that DOE activities be conducted in compliance with a documented Radiation Protection Program (RPP) as approved by DOE. This document promulgates the RPP for the Nevada Test Site (NTS), related (onsite or offsite) DOE National Nuclear Security Administration Nevada Site Office (NNSA/NSO) operations, and environmental restoration offsite projects.

  8. Illness and Injury Surveillance Program Guidelines

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE-STD-1190-2007 DOE STANDARD ILLNESS AND INJURY SURVEILLANCE PROGRAM GUIDELINES U.S. Department of Energy AREA OCSH Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-1190-2007 Available on the Department of Energy Technical Standards Program Web site at http://tis.eh.doe.gov/techstds/ DOE-STD-1190-2007 Foreword 1. Use of this standard is not mandatory. Users should review the document and determine if it

  9. Materials Control and Accountability Program Manager | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Materials Control and Accountability Program Manager Amy Whitworth Amy Whitworth July 2009 Fellow by the Institute of Nuclear Materials Management NNSA Materials Control and Accountability Program Manager Amy Whitworth was awarded the prestigious title of Fellow by the Institute of Nuclear Materials Management during its recent annual meeting in Tucson, Ariz. Fellows must be nominated by their peers, recommended by the INMM Fellows Committee and approved by

  10. State Energy Efficiency Program Evaluation Inventory - Energy Information

    Gasoline and Diesel Fuel Update (EIA)

    State Energy Efficiency Program Evaluation Inventory July 2013 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | State Energy Efficiency Program Evaluation Inventory i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other

  11. State Energy Program Success Stories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Success Stories State Energy Program Success Stories These success stories include EERE Blog entries for the U.S. Department of Energy (DOE) State Energy Program. Photo of a house with a fixed street sign at the entrance to the driveway in the photo foreground. Mississippi Adopts New Rules to Save Energy, Money Mississippi Public Service Commission (PSC) approved new energy efficiency rules for electric and natural gas utility companies to offer customers several pathways to increase energy

  12. Directory of certificiates of compliance for radioactive materials packages: Report of NRC approved packages. Revision 19, Volume 1

    SciTech Connect (OSTI)

    1996-10-01

    This directory provides information on packagings approved by the U.S. Nuclear Regulatory Commission.

  13. Memorandum, Approval of a Permanent Variance Regarding Static Magnetic Fields at Brookhaven National Laboratory (Variance 102 1)

    Broader source: Energy.gov [DOE]

    Approval of a Permanenet Variance Regarding Static Magnetic Fields at Brookhaven National Laboratory (Variance 1021)

  14. WeldBraze Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The measures used to attain an exception include the following according to 10 CFR 851: Design drawings, sketches, and calculations must be reviewed and approved by a qualified ...

  15. RH TRU Waste Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    as addressed in WIPP's first environmental impact statement in 1980 and the 1992 federal WIPP ... and NMED must approve the site's procedures for characterization, determining ...

  16. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Program Description SAGE, the Summer of Applied Geophysical Experience, is a unique educational program designed to introduce students in geophysics and related fields to "hands on" geophysical exploration and research. The program emphasizes both teaching of field methods and research related to basic science and a variety of applied problems. SAGE is hosted by the National Security Education Center and the Earth and Environmental Sciences Division of the Los Alamos National

  17. Volunteer Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National VolunteerMatch Retired and Senior Volunteer Program United Way of Northern New Mexico United Way of Santa Fe County Giving Employee Giving Campaign Holiday Food Drive...

  18. exercise program

    National Nuclear Security Administration (NNSA)

    and dispose of many different hazardous substances, including radioactive materials, toxic chemicals, and biological agents and toxins.

    There are a few programs NNSA uses...

  19. Counterintelligence Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1992-09-04

    To establish the policies, procedures, and specific responsibilities for the Department of Energy (DOE) Counterintelligence (CI) Program. This directive does not cancel any other directive.

  20. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Applied Geophysical Experience, is a unique educational program designed to introduce students in geophysics and related fields to "hands on" geophysical exploration and research....

  1. Programming Stage

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-05-21

    This chapter addresses plans for the acquisition and installation of operating environment hardware and software and design of a training program.

  2. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    their potential and pursue opportunities in science, technology, engineering and mathematics. Through Expanding Your Horizon (EYH) Network programs, we provide STEM role models...

  3. Special Programs

    Office of Energy Efficiency and Renewable Energy (EERE)

    Headquarters Human Resources Operations promotes a variety of hiring flexibilities for managers to attract a diverse workforce, from Student Internship Program opportunities (Pathways), Veteran...

  4. Counterintelligence Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-12-10

    The Order establishes Counterintelligence Program requirements and responsibilities for the Department of Energy, including the National Nuclear Security Administration. Supersedes DOE 5670.3.

  5. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Program Description Inspiring girls to recognize their potential and pursue opportunities in science, technology, engineering and mathematics. Through Expanding Your Horizon (EYH) ...

  6. IMPACTS: Industrial Technologies Program, Summary of Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IMPACTS: Industrial Technologies Program, Summary of Program Results for CY2009 IMPACTS: Industrial Technologies Program, Summary of Program Results for CY2009 ...

  7. IMO group approves enhanced design rules for tankers

    SciTech Connect (OSTI)

    Not Available

    1992-04-06

    This paper reports on a committee of the International Maritime Organization (IMO) which has approved ship design rules aimed at reducing the risk of oil spills from tankers. The approval by IMO's maritime environment protection committee (MEPC) assures that the next generation of tankers will have double hulls or, despite reservations by the U.S., middeck or other designs that offer protection against pollution equal to that provided by double hulls. The requirement for double hull or middeck design will apply to tankers larger than 5,000 dwt. Small tankers, of 600-5,000 dwt, must be fitted with a double bottom. There are no requirements for tankers of less than 600 dwt. The enhanced design criteria will take effect July 6, 1993, for new and existing vessels from 70 nations that have signed the International Convention for the Prevention of Pollution from Ships (Marpol 73/78). Owners in those countries control 90% of the world tanker fleet. MEPC also tackled the problem of existing single hulled vessels. They will be able to trade until they are 25-30 years old before they will be required to meet the enhanced design criteria.

  8. Student Internship Programs Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Student Internship Programs Program Description The objective of the Laboratory's student internship programs is to provide students with opportunities for meaningful hands- on experience supporting educational progress in their selected scientific or professional fields. The most significant impact of these internship experiences is observed in the intellectual growth experienced by the participants. Student interns are able to appreciate the practical value of their education efforts in their

  9. A neutronic feasibility study of the AP1000 design loaded with fully ceramic micro-encapsulated fuel

    SciTech Connect (OSTI)

    Liang, C.; Ji, W.

    2013-07-01

    A neutronic feasibility study is performed to evaluate the utilization of fully ceramic microencapsulated (FCM) fuel in the AP1000 reactor design. The widely used Monte Carlo code MCNP is employed to perform the full core analysis at the beginning of cycle (BOC). Both the original AP1000 design and the modified design with the replacement of uranium dioxide fuel pellets with FCM fuel compacts are modeled and simulated for comparison. To retain the original excess reactivity, ranges of fuel particle packing fraction and fuel enrichment in the FCM fuel design are first determined. Within the determined ranges, the reactor control mechanism employed by the original design is directly used in the modified design and the utilization feasibility is evaluated. The worth of control of each type of fuel burnable absorber (discrete/integral fuel burnable absorbers and soluble boron in primary coolant) is calculated for each design and significant differences between the two designs are observed. Those differences are interpreted by the fundamental difference of the fuel form used in each design. Due to the usage of silicon carbide as the matrix material and the fuel particles fuel form in FCM fuel design, neutron slowing down capability is increased in the new design, leading to a much higher thermal spectrum than the original design. This results in different reactivity and fission power density distributions in each design. We conclude that a direct replacement of fuel pellets by the FCM fuel in the AP1000 cannot retain the original optimum reactor core performance. Necessary modifications of the core design should be done and the original control mechanism needs to be re-designed. (authors)

  10. Program Description | Robotics Internship Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    March 4, 2016. Apply Now for the Robotics Internship About the Internship Program Description Start of Appointment Renewal of Appointment End of Appointment Stipend Information...

  11. Y-12 Final Site-Wide Environmental Impact Statement Approved | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) Final Site-Wide Environmental Impact Statement Approved March 02, 2011 Microsoft Office document icon NR-03-2

  12. Notice of Office of Management and Budget Action to Approve with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Notice of Office of Management and Budget Action to Approve with Change the Information Collection Request (ICR) for an Extension of the ICR for OE Recovery Act Financial ...

  13. Notice of Office of Management and Budget Action to Approve with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Notice of Office of Management and Budget Action to Approve with Change the Information Collection Request (ICR) for a New Collection for OE Recovery Act Financial Assistance ...

  14. National Policy Memorandum NPM-TRUS-29: Guidance for the Approval...

    Open Energy Info (EERE)

    for the Approval of Tribal Leasing Regulations under the HEARTH ActLegal Author Bureau of Indian Affairs Organizations Bureau of Land Management and Bureau of Indian Affairs...

  15. Required cavity HOM deQing calculated from probability estimates of coupled bunch instabilities in the APS ring

    SciTech Connect (OSTI)

    Emery, L.

    1993-06-01

    A method of determining the deQing requirement of individual cavity higher-order modes (HOM) for a multi-cavity RF system is presented and applied to the APS ring. Since HOM resonator frequency values are to some degree uncertain, the HOM frequencies should be regarded as random variables in predicting the stability of the coupled bunch beam modes. A Monte Carlo simulation provides a histogram of the growth rates from which one obtains an estimate of the probability of instability. The damping of each HOM type is determined such that the damping effort is economized, i.e. no single HOM dominates the specified growth rate histogram.

  16. Final Report. LAW Glass Formulation to Support AP-101 Actual Waste Testing, VSL-03R3470-2, Rev. 0

    SciTech Connect (OSTI)

    Muller, I. S.; Pegg, I. L.; Rielley, Elizabeth; Carranza, Isidro; Hight, Kenneth; Lai, Shan-Tao T.; Mooers, Cavin; Bazemore, Gina; Cecil, Richard; Kruger, Albert A.

    2015-06-22

    The main objective of the work was to develop and select a glass formulation for vitrification testing of the actual waste sample of LAW AP-101 at Battelle - Pacific Northwest Division (PNWD). Other objectives of the work included preparation and characterization of glasses to demonstrate compliance with contract and processing requirements, evaluation of the ability to achieve waste loading requirements, testing to demonstrate compatibility of the glass melts with melter materials of construction, comparison of the properties of simulant and actual waste glasses, and identification of glass formulation issues with respect to contract specifications and processing requirements.

  17. ADP computer security classification program

    SciTech Connect (OSTI)

    Augustson, S.J.

    1984-01-01

    CG-ADP-1, the Automatic Data Processing Security Classification Guide, provides for classification guidance (for security information) concerning the protection of Department of Energy (DOE) and DOE contractor Automatic Data Processing (ADP) systems which handle classified information. Within the DOE, ADP facilities that process classified information provide potentially lucrative targets for compromise. In conjunction with the security measures required by DOE regulations, necessary precautions must be taken to protect details of those ADP security measures which could aid in their own subversion. Accordingly, the basic principle underlying ADP security classification policy is to protect information which could be of significant assistance in gaining unauthorized access to classified information being processed at an ADP facility. Given this policy, classification topics and guidelines are approved for implementation. The basic program guide, CG-ADP-1 is broad in scope and based upon it, more detailed local guides are sometimes developed and approved for specific sites. Classification topics are provided for system features, system and security management, and passwords. Site-specific topics can be addressed in local guides if needed.

  18. Assessment of Quality Assurance Measures for Radioactive Material Transport Packages not Requiring Competent Authority Design Approval - 13282

    SciTech Connect (OSTI)

    Komann, Steffen; Groeke, Carsten; Droste, Bernhard

    2013-07-01

    The majority of transports of radioactive materials are carried out in packages which don't need a package design approval by a competent authority. Low-active radioactive materials are transported in such packages e.g. in the medical and pharmaceutical industry and in the nuclear industry as well. Decommissioning of NPP's leads to a strong demand for packages to transport low and middle active radioactive waste. According to IAEA regulations the 'non-competent authority approved package types' are the Excepted Packages and the Industrial Packages of Type IP-1, IP-2 and IP-3 and packages of Type A. For these types of packages an assessment by the competent authority is required for the quality assurance measures for the design, manufacture, testing, documentation, use, maintenance and inspection (IAEA SSR 6, Chap. 306). In general a compliance audit of the manufacturer of the packaging is required during this assessment procedure. Their regulatory level in the IAEA regulations is not comparable with the 'regulatory density' for packages requiring competent authority package design approval. Practices in different countries lead to different approaches within the assessment of the quality assurance measures in the management system as well as in the quality assurance program of a special package design. To use the package or packaging in a safe manner and in compliance with the regulations a management system for each phase of the life of the package or packaging is necessary. The relevant IAEA-SSR6 chap. 801 requires documentary verification by the consignor concerning package compliance with the requirements. (authors)

  19. Base Research Program

    SciTech Connect (OSTI)

    Everett Sondreal; John Hendrikson

    2009-03-31

    In June 2009, the Energy & Environmental Research Center (EERC) completed 11 years of research under the U.S. Department of Energy (DOE) Base Cooperative Agreement No. DE-FC26-98FT40320 funded through the Office of Fossil Energy (OFE) and administered at the National Energy Technology Laboratory (NETL). A wide range of diverse research activities were performed under annual program plans approved by NETL in seven major task areas: (1) resource characterization and waste management, (2) air quality assessment and control, (3) advanced power systems, (4) advanced fuel forms, (5) value-added coproducts, (6) advanced materials, and (7) strategic studies. This report summarizes results of the 67 research subtasks and an additional 50 strategic studies. Selected highlights in the executive summary illustrate the contribution of the research to the energy industry in areas not adequately addressed by the private sector alone. During the period of performance of the agreement, concerns have mounted over the impact of carbon emissions on climate change, and new programs have been initiated by DOE to ensure that fossil fuel resources along with renewable resources can continue to supply the nation's transportation fuel and electric power. The agreement has addressed DOE goals for reductions in CO{sub 2} emissions through efficiency, capture, and sequestration while expanding the supply and use of domestic energy resources for energy security. It has further contributed to goals for near-zero emissions from highly efficient coal-fired power plants; environmental control capabilities for SO{sub 2}, NO{sub x}, fine respirable particulate (PM{sub 2.5}), and mercury; alternative transportation fuels including liquid synfuels and hydrogen; and synergistic integration of fossil and renewable resources (e.g., wind-, biomass-, and coal-based electrical generation).

  20. Approaches to Approved Contractor Lists | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Making the Program Work for Contractors Better Buildings - Spotlight on Portland, Oregon; Financing and Incetntives: Use Incentives to Get Attention and Encourage Deep Savings

  1. LANS Board of Governors approves $3 million for education, economic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    businesses that support our national security mission," said Laboratory Director Charlie McMillan. "It sustains the mutually beneficial programs that make Los Alamos one of the...

  2. $3 million approved for 2015 LANS Community Commitment Plan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANS Community Commitment Plan will provide 1 million for education, including science, technology, engineering and math (STEM) education programs 1 million for economic...

  3. SU-E-T-14: A Feasibility Study of Using Modified AP Proton Beam for Post-Operative Pancreatic Cancer Therapy

    SciTech Connect (OSTI)

    Ding, X; Witztum, A; Kenton, O; Younan, F; Dormer, J; Kremmel, E; Lin, H; Liu, H; Tang, S; Both, S; Kassaee, A; Avery, S

    2014-06-01

    Purpose: Due to the unpredictability of bowel gas movement, the PA beam direction is always favored for robust proton therapy in post-operative pancreatic cancer treatment. We investigate the feasibility of replacing PA beam with a modified AP beam to take the bowel gas uncertainty into account. Methods: Nine post-operative pancreatic cancer patients treated with proton therapy (5040cGy, 28 fractions) in our institution were randomly selected. The original plan uses PA and lateral direction passive-scattering proton beams. Beam weighting is about 1:1. All patients received weekly verification CTs to assess the daily variations(total 17 verification CTs). The PA direction beam was replaced by two other groups of AP direction beam. Group AP: takes 3.5% range uncertainty into account. Group APmod: compensates the bowel gas uncertainty by expanding the proximal margin to 2cm more. The 2cm margin was acquired from the average bowel diameter in from 100 adult abdominal CT scans near pancreatic region (+/- 5cm superiorly and inferiorly). Dose Volume Histograms(DVHs) of the verification CTs were acquired for robustness study. Results: Without the lateral beam, Group APmod is as robust as Group PA. In Group AP, more than 10% of iCTV D98/D95 were reduced by 4–8%. LT kidney and Liver dose robustness are not affected by the AP/PA beam direction. There is 10% of chance that RT kidney and cord will be hit by AP proton beam due to the bowel gas. Compared to Group PA, APmod plan reduced the dose to kidneys and cord max significantly, while there is no statistical significant increase in bowel mean dose. Conclusion: APmod proton beam for the target coverage could be as robust as the PA direction without sacrificing too much of bowel dose. When the AP direction beam has to be selected, a 2cm proximal margin should be considered.

  4. CH Packaging Program Guidance

    SciTech Connect (OSTI)

    None, None

    2008-09-11

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: "each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the pplication." They further state: "each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant (WIPP) management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required. In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are

  5. CH Packaging Program Guidance

    SciTech Connect (OSTI)

    None, None

    2007-12-13

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: "each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." They further state: "each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant (WIPP) management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are

  6. CH Packaging Program Guidance

    SciTech Connect (OSTI)

    None, None

    2009-06-01

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: "each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." They further state: "each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant (WIPP) management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required. In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are

  7. Request for approval, vented container annual release fraction

    SciTech Connect (OSTI)

    HILL, J.S.

    1999-10-12

    In accordance with the approval conditions for Modification to the Central Waste Complex (CWC) Radioactive Air Emissions Notice of Construction (NOC). dated August 24,1998, a new release fraction has been developed for submittal to the Washington State Department of Health (WDOH). The proposed annual release fraction of 2.50 E-14 is proposed for use in future NOCs involving the storage and handling operations associated with vented containers on the Hanford Site. The proposed annual release fraction was the largest release fraction calculated from alpha measurements of the NucFil filters from 10 vented containers consisting of nine 55-gallon drums and one burial box with dimensions of 9.3 x 5.7 x 6.4 feet. An annual release fraction of 2.0 E-09 was used in the modification to the CWC radioactive air emissions NOC. This study confirmed that the release fraction used in the CWC radioactive air emissions NOC was conservative.

  8. 1994 Characterization report for the state approved land disposal site

    SciTech Connect (OSTI)

    Swanson, L.C.

    1994-09-19

    This report summarizes the results of characterization activities at the proposed state-approved land disposal site (SALDS); it updates the original characterization report with studies completed since the first characterization report. The initial characterization report discusses studies from two characterization boreholes, 699-48-77A and 699-48-77B. This revision includes data from implementation of the Groundwater Monitoring Plan and the Aquifer Test Plan. The primary sources of data are two down-gradient groundwater monitoring wells, 699-48-77C and 699-48-77D, and aquifer testing of three zones in well 699-48-77C. The SALDS is located on the Hanford Site, approximately 183 m north of the 200 West Area on the north side of the 200 Areas Plateau. The SALDS is an infiltration basin proposed for disposal of treated effluents from the 200 Areas of Hanford.

  9. Program Overview

    Broader source: Energy.gov [DOE]

    The culture of the DOE community will be based on standards. Technical standards will formally integrate part of all DOE facility, program and project activities. The DOE will be recognized as a...

  10. Deconvolution Program

    Energy Science and Technology Software Center (OSTI)

    1999-02-18

    The program is suitable for a lot of applications in applied mathematics, experimental physics, signal analytical system and some engineering applications range i.e. deconvolution spectrum, signal analysis and system property analysis etc.

  11. Integrated Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Program Review (IPR) Quarterly Business Review (QBR) Access to Capital Debt Management July 2013 Aug. 2013 Sept. 2013 Oct. 2013 Nov. 2013 Dec. 2013 Jan. 2014 Feb. 2014 March...

  12. Science Programs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The focal point for basic and applied R&D programs with a primary focus on energy but also encompassing medical, biotechnology, high-energy physics, and advanced scientific ...

  13. Programming models

    SciTech Connect (OSTI)

    Daniel, David J; Mc Pherson, Allen; Thorp, John R; Barrett, Richard; Clay, Robert; De Supinski, Bronis; Dube, Evi; Heroux, Mike; Janssen, Curtis; Langer, Steve; Laros, Jim

    2011-01-14

    A programming model is a set of software technologies that support the expression of algorithms and provide applications with an abstract representation of the capabilities of the underlying hardware architecture. The primary goals are productivity, portability and performance.

  14. Program Analyst

    Broader source: Energy.gov [DOE]

    A successful candidate in this position will serve as an Program Analyst for the System Operations team in the area of regulatory compliance. The successful candidate will also become a subject...

  15. Educational Programs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Educational Programs Educational Programs A collaboration between Los Alamos National Laboratory and the University of California at San Diego (UCSD) Jacobs School of Engineering Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff Assistant Ellie Vigil (505) 667-2818 Email Administrative Assistant Rebecca Duran (505) 665-8899 Email There are two educational components to the Engineering Institute. The Los Alamos Dynamic

  16. Program Leadership

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Program Leadership - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear

  17. Volunteer Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Volunteer Program Volunteer Program Our good neighbor pledge includes active employee engagement in our communities through volunteering. More than 3,000 current and retired Lab employees have logged more than 1.8 million volunteer hours since 2007. August 19, 2015 Los Alamos National Laboratory employee volunteers with Mountain Canine Corps Lab employee Debbi Miller volunteers for the Mountain Canine Corps with her search and rescue dogs. She also volunteers with another search and rescue

  18. Program Summaries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Program Summaries Basic Energy Sciences (BES) BES Home About Research Facilities Science Highlights Benefits of BES Funding Opportunities Basic Energy Sciences Advisory Committee (BESAC) Community Resources Program Summaries Brochures Reports Accomplishments Presentations BES and Congress Science for Energy Flow Seeing Matter Nano for Energy Scale of Things Chart Contact Information Basic Energy Sciences U.S. Department of Energy SC-22/Germantown Building 1000 Independence Ave., SW Washington,

  19. Tank waste remediation system privatization infrastructure program requirements and document management process guide

    SciTech Connect (OSTI)

    ROOT, R.W.

    1999-05-18

    This guide provides the Tank Waste Remediation System Privatization Infrastructure Program management with processes and requirements to appropriately control information and documents in accordance with the Tank Waste Remediation System Configuration Management Plan (Vann 1998b). This includes documents and information created by the program, as well as non-program generated materials submitted to the project. It provides appropriate approval/control, distribution and filing systems.

  20. OVERPRESSURE BY SYSTEM DESIGN APPROVAL FORM PS-2 GENERAL Pressure System Number:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OVERPRESSURE BY SYSTEM DESIGN APPROVAL FORM PS-2 GENERAL Pressure System Number: Pressure System Name: Design Authority: OVERPRESSURE BY SYSTEM DESIGN REPORT CONTAINS: (check if complete) Reason for using overprotection by design Detailed failure analysis by multidisciplinary team Detailed analysis to determine maximum credible pressure Requirements for periodic inspections and testing of controls, procedures and instrumentation APPROVAL: Comments: Pressure Systems Committee Chair signature:

  1. Project W-521 waste feed delivery systems environmental permits and approvals plan

    SciTech Connect (OSTI)

    TOLLEFSON, K.S.

    1999-09-21

    This document has been prepared to define the specific environmental requirements applicable to Project W-521. The document describes the permits and approvals necessary for the project to design, construct, and install planned upgrades, and provides a schedule of activities and provides cost estimates to complete the required permitting and approval activities.

  2. SEP Request for Approval Form 2 - Other Derived Energy Sources | Department

    Broader source: Energy.gov (indexed) [DOE]

    of Energy 2_Other-Derived-Energy-Sources.docx (38.18 KB) More Documents & Publications SEP Request for Approval Form 3 - Other Complex Regression Model Rationale Superior Energy Performance Enrollment and Application Forms SEP Request for Approval Form 7 - Other Situations for Consumption Adjustment

  3. SEP Request for Approval Form 3 - Other Complex Regression Model Rationale

    Broader source: Energy.gov (indexed) [DOE]

    | Department of Energy 3_Other-Complex-Regression-Model-Rationale.docx (36.53 KB) More Documents & Publications Superior Energy Performance Enrollment and Application Forms SEP Request for Approval Form 5 - Model Does Not Satisfy 3.4.1-3.4.10 Requirements SEP Request for Approval Form 1 - Modeling of Data at Finer Intervals than Weekly

  4. SEP Request for Approval Form 6 - Non-Routine Adjustments | Department of

    Broader source: Energy.gov (indexed) [DOE]

    Energy 6_Non-Routine-Adjustments.docx (25.82 KB) More Documents & Publications Superior Energy Performance Enrollment and Application Forms SEP Request for Approval Form 7 - Other Situations for Consumption Adjustment SEP Request for Approval Form 4 - Alternative Adjustment Model Application Methodology

  5. Advanced Photon Source experimental beamline Safety Assessment Document: Addendum to the Advanced Photon Source Accelerator Systems Safety Assessment Document (APS-3.2.2.1.0)

    SciTech Connect (OSTI)

    1995-01-01

    This Safety Assessment Document (SAD) addresses commissioning and operation of the experimental beamlines at the Advanced Photon Source (APS). Purpose of this document is to identify and describe the hazards associated with commissioning and operation of these beamlines and to document the measures taken to minimize these hazards and mitigate the hazard consequences. The potential hazards associated with the commissioning and operation of the APS facility have been identified and analyzed. Physical and administrative controls mitigate identified hazards. No hazard exists in this facility that has not been previously encountered and successfully mitigated in other accelerator and synchrotron radiation research facilities. This document is an updated version of the APS Preliminary Safety Analysis Report (PSAR). During the review of the PSAR in February 1990, the APS was determined to be a Low Hazard Facility. On June 14, 1993, the Acting Director of the Office of Energy Research endorsed the designation of the APS as a Low Hazard Facility, and this Safety Assessment Document supports that designation.

  6. Student Internship Programs Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for a summer high school student to 75,000 for a Ph.D. student working full-time for a year. Program Coordinator: Scott Robbins Email: srobbins@lanl.gov Phone number: 663-5621...

  7. Postdoctoral Program Program Description The Postdoctoral (Postdoc...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Postdoctoral Program Program Description The Postdoctoral (Postdoc) Research program offers the opportunity for appointees to perform research in a robust scientific R&D...

  8. Radiological Control Programs for Special Tritium Compounds

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    84-2004 SEPTEMBER 2004 CHANGE NOTICE NO. 1 Date June 2006 DOE HANDBOOK RADIOLOGICAL CONTROL PROGRAMS FOR SPECIAL TRITIUM COMPOUNDS U.S. Department of Energy AREA OCSH Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE ii Table of Changes Page Change 67 (near bottom) In row 1, column 2 of the table titled "dosimetric properties" 6 mrem was changed to 6 x 10 -2 mrem Available on the Department of Energy

  9. Protection Program Defensive Planning for Fixed Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    STANDARD Protection Program Defensive Planning For Fixed Facilities U.S. Department of Energy AREA SANS Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE STD-1207-2012 December 2012 ──────────────── CHANGE NOTICE NO.1 SEPTEMBER 2015 DOE STD-1207-2012 This Page Intentionally Left Blank DOE STD-1207-2012 i ATTACHMENT 1 Change Notice No. 1 DOE STD-1207-2012 September 2015 Protection

  10. Navajo Electrification Demonstration Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Future Plans * Navajo Electrification Demonstration Program -Video OBJECTIVES OBJECTIVES " ... Navajo Electrification Demonstration Navajo Electrification Demonstration Program Program ...

  11. ISA Approves Standard for Wireless Automation in Process Control...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Through the Office of Electricity Delivery and Energy Reliability's National SCADA Test Bed (NSTB) Program, ISA100 Co-Chair Wayne Manges helped develop this standard as part of his ...

  12. WPN 16-7: Approved Weatherization Materials with Specifications

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) is streamlining and consolidating active Weatherization Assistance Program (WAP) Guidance documents in order ease the burden on grantees in implementing WAP.

  13. Austin Energy- Residential Solar PV Rebate Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Rebates will only be paid for approved systems installed by approved solar contractors according to the established technical requirements. All systems must conform to the utility's equipment and...

  14. Pre-approvals Needed for Alternative Approaches | Department of Energy

    Energy Savers [EERE]

    Data Dashboard Portland Data Dashboard The data dashboard for Portland, Oregon, a partner in the Better Buildings Neighborhood Program. Portland Data Dashboard (301.34 KB) More Documents & Publications Alabama -- SEP Data Dashboard Rutland County Data Dashboard Austin Energy Data Dashboard

    Summary of Reported Data Portland Summary of Reported Data Summary of data reported by Better Buildings Neighborhood Program partner Portland, Oregon. Portland Summary of Reported Data (873.83 KB) More

  15. Attorney General's signed concurrence letter approved October 9, 2009 |

    Office of Environmental Management (EM)

    Lutron ex-parte meeting at DOE Pekka Hakkarainen 11 February 2015 Page 1 of 4 Lutron Electronics Co., Inc. ex-parte meeting at the U.S. Department of Energy Subject: LED drivers are not external power supplies Meeting date: 11 February 2015 Attendees: John Cymbalsky, Equipment and Appliance Standards Program Manager, Building Technologies Office, DOE Jeremy Dommu, Project Manager, Equipment and Appliance Standards Program, Building Technologies Office, DOE Laura Barhydt, Assistant General

  16. HANFORD DOUBLE SHELL TANK THERMAL AND SEISMIC PROJECT INCREASED LIQUID LEVEL ANALYSIS FOR 241-AP TANK FARMS

    SciTech Connect (OSTI)

    TC MACKEY; JE DEIBLER; MW RINKER; KI JOHNSON; SP PILLI; NK KARRI; FG ABATT; KL STOOPS

    2009-01-14

    The essential difference between Revision 1 and the original issue of this report is the analysis of the anchor bolts that tie the steel dome of the primary tank to the concrete tank dome. The reevaluation of the AP anchor bolts showed that (for a given temperature increase) the anchor shear load distribution did not change significantly from the initially higher stiffness to the new secant shear stiffness. Therefore, the forces and displacements of the other tank components such as the primary tanks stresses, secondary liner strains, and concrete tank forces and moments also did not change significantly. Consequently, the revised work in Revision 1 focused on the changes in the anchor bolt responses and a full reevaluation of all tank components was judged to be unnecessary.

  17. PROGRAM ABSTRACTS

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & DEVELOPMENT: PROGRAM ABSTRACTS Energy Efficiency and Renewable Energy Office of Transportation Technologies Office of Advanced Automotive Technologies Catalyst Layer Bipolar Plate Electrode Backing Layers INTEGRATED SYSTEMS Polymer Electrolyte Membrane Fuel Cells Fuel Cell Stack PEM STACK & STACK COMPONENTS Fuel Cell Stack System Air Management System Fuel Processor System For Transportation June 1999 ENERGY EFFICIENCY AND RENEWABLE ENERGY OFFICE OF TRANSPORTATION TECHNOLOGIES OFFICE

  18. Safety Analysis Report Update Program: Overview and Phase 1 implementation

    SciTech Connect (OSTI)

    Not Available

    1991-08-01

    During FY 1989, the DOE-Oak Ridge Operations (ORO) office formed joint Operating Contractor/DOE-ORO organizations to address safety analysis related issues. The Safety Analysis Report Working Group (SARWG) took on the task of developing a strategy to address the issue of updating SARs to today's standards. The resulting SAR Update Program was approved by the Safety Analysis Report Management Group (SARMG) and on November 6, 1989, was accepted by the senior management of DOE-ORO, and its operating contractors, including Martin Marietta Energy Systems, Inc. This SAR Update Program consists of five phases: Phase 0 -- continued operation evaluations; Phase 1 -- hazard classification and qualitative analysis; Phase 1A -- updated operational safety requirements; Phase 2 -- quantitative accident analysis; and, Phase 3 -- complete DOE-approved SARs. 8 refs., 17 figs., 6 tabs.

  19. Approved Site Treatment Plan, Volumes 1 and 2. Revision 4

    SciTech Connect (OSTI)

    Helmich, E.H.; Molen, G.; Noller, D.

    1996-03-22

    The US Department of Energy, Savannah River Operations Office (DOE-SR), has prepared the Site Treatment Plan (STP) for Savannah River Site (SRS) mixed wastes in accordance with RCRA Section 3021(b), and SCDHEC has approved the STP (except for certain offsite wastes) and issued an order enforcing the STP commitments in Volume 1. DOE-SR and SCDHEC agree that this STP fulfills the requirements contained in the FFCAct, RCRA Section 3021, and therefore, pursuant to Section 105(a) of the FFCAct (RCRA Section 3021(b)(5)), DOE`s requirements are to implement the plan for the development of treatment capacities and technologies pursuant to RCRA Section 3021. Emerging and new technologies not yet considered may be identified to manage waste more safely, effectively, and at lower cost than technologies currently identified in the plan. DOE will continue to evaluate and develop technologies that offer potential advantages in public acceptance, privatization, consolidation, risk abatement, performance, and life-cycle cost. Should technologies that offer such advantages be identified, DOE may request a revision/modification of the STP in accordance with the provisions of Consent Order 95-22-HW. The Compliance Plan Volume (Volume 1) identifies project activity schedule milestones for achieving compliance with Land Disposal Restrictions (LDR). Information regarding the technical evaluation of treatment options for SRS mixed wastes is contained in the Background Volume (Volume 2) and is provided for information.

  20. Savannah River Site Approved Site Treatment Plan, 1998 Annual Update

    SciTech Connect (OSTI)

    Lawrence, B.; Berry, M.

    1998-03-01

    The U.S. Department of Energy, Savannah River Operations Office (DOE- SR),has prepared the Site Treatment Plan (STP) for Savannah River Site (SRS) mixed wastes in accordance with RCRA Section 3021(b), and SCDHEC has approved the STP (except for certain offsite wastes) and issued an order enforcing the STP commitments in Volume I. DOE-SR and SCDHEC agree that this STP fulfills the requirements contained in the FFCAct, RCRA Section 3021, and therefore,pursuant to Section 105(a) of the FFCAct (RCRA Section 3021(b)(5)), DOE`s requirements are to implement the plan for the development of treatment capacities and technologies pursuant to RCRA Section 3021.Emerging and new technologies not yet considered may be identified to manage waste more safely, effectively, and at lower cost than technologies currently identified in the plan. DOE will continue to evaluate and develop technologies that offer potential advantages in public acceptance, privatization, consolidation, risk abatement, performance, and life-cycle cost. Should technologies that offer such advantages be identified, DOE may request a revision/modification of the STP in accordance with the provisions of Consent Order 95-22-HW.The Compliance Plan Volume (Volume I) identifies project activity schedule milestones for achieving compliance with Land Disposal Restrictions (LDR). Information regarding the technical evaluation of treatment options for SRS mixed wastes is contained in the Background Volume (Volume II) and is provided for information.

  1. Section 08: Approval Process for Waste Shipment From Waste Generator Sites

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for Disposal at the WIPP Approval Process for Waste Shipment From Waste Generator Sites for Disposal at the WIPP (40 CFR § 194.8) United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Compliance Recertification Application 2014 Approval Process for Waste Shipment From Waste Generator Sites for Disposal at the WIPP (40 CFR § 194.8) Table of Contents 8.0 Approval Process for Waste Shipment From Waste Generator Sites for Disposal at the WIPP

  2. FDA Approves Drug for Type 2 Diabetes Invented with Aid of Protein

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Structure Data Taken at ALS FDA Approves Drug for Type 2 Diabetes Invented with Aid of Protein Structure Data Taken at ALS FDA Approves Drug for Type 2 Diabetes Invented with Aid of Protein Structure Data Taken at ALS Print Friday, 24 May 2013 13:44 In January 2013, the U.S. Food and Drug Administration approved NESINA for the treatment of type 2 diabetes in adults as an adjunct to diet and exercise. NESINA uses a novel mechanism of action to lower blood glucose levels. A dipeptidyl

  3. Review and Approval of Nuclear Facility Safety Basis and Safety Design Basis Documents

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SENSITIVE DOE-STD-1104-2014 December 2014 Superseding DOE-STD-1104-2009 DOE STANDARD REVIEW AND APPROVAL OF NUCLEAR FACILITY SAFETY BASIS AND SAFETY DESIGN BASIS DOCUMENTS U.S. Department of Energy AREA SAFT Washington, DC 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1104-2014 i FOREWORD 1. This Standard describes a framework and the criteria to be used for approval of (1) safety basis documents, as required by 10 Code of Federal Regulation

  4. Program Development

    SciTech Connect (OSTI)

    Atencio, Julian J.

    2014-05-01

    This presentation covers how to go about developing a human reliability program. In particular, it touches on conceptual thinking, raising awareness in an organization, the actions that go into developing a plan. It emphasizes evaluating all positions, eliminating positions from the pool due to mitigating factors, and keeping the process transparent. It lists components of the process and objectives in process development. It also touches on the role of leadership and the necessity for audit.

  5. Maryland Efficiency Program Options

    Office of Energy Efficiency and Renewable Energy (EERE)

    Maryland Efficiency Program Options, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  6. STEP Program Benchmark Report

    Broader source: Energy.gov [DOE]

    STEP Program Benchmark Report, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  7. Program Evaluation: Program Logic | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program Logic Program Evaluation: Program Logic Step four will help you develop a logical model for your program (learn more about the other steps in general program evaluations): What is a Logic Model? Benefits of Using Logic Modeling Pitfalls and How to Avoid Them Steps to Developing a Logic Model What is a Logic Model? Logic modeling is a thought process program evaluators have found to be useful for at least forty years and has become increasingly popular with program managers during the

  8. The power of simplification: Operator interface with the AP1000{sup R} during design-basis and beyond design-basis events

    SciTech Connect (OSTI)

    Williams, M. G.; Mouser, M. R.; Simon, J. B.

    2012-07-01

    The AP1000{sup R} plant is an 1100-MWe pressurized water reactor with passive safety features and extensive plant simplifications that enhance construction, operation, maintenance, safety and cost. The passive safety features are designed to function without safety-grade support systems such as component cooling water, service water, compressed air or HVAC. The AP1000 passive safety features achieve and maintain safe shutdown in case of a design-basis accident for 72 hours without need for operator action, meeting the expectations provided in the European Utility Requirements and the Utility Requirement Document for passive plants. Limited operator actions may be required to maintain safe conditions in the spent fuel pool (SFP) via passive means. This safety approach therefore minimizes the reliance on operator action for accident mitigation, and this paper examines the operator interaction with the Human-System Interface (HSI) as the severity of an accident increases from an anticipated transient to a design basis accident and finally, to a beyond-design-basis event. The AP1000 Control Room design provides an extremely effective environment for addressing the first 72 hours of design-basis events and transients, providing ease of information dissemination and minimal reliance upon operator actions. Symptom-based procedures including Emergency Operating Procedures (EOPs), Abnormal Operating Procedures (AOPs) and Alarm Response Procedures (ARPs) are used to mitigate design basis transients and accidents. Use of the Computerized Procedure System (CPS) aids the operators during mitigation of the event. The CPS provides cues and direction to the operators as the event progresses. If the event becomes progressively worse or lasts longer than 72 hours, and depending upon the nature of failures that may have occurred, minimal operator actions may be required outside of the control room in areas that have been designed to be accessible using components that have been

  9. Review and Approval of Nuclear Facility Safety Basis Documents (Documented Safety Analyses and Technical Safety Requirements)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE-STD-1104-96 November 2005 CHANGE NOTICE NO. 3 Date December 2005 DOE STANDARD REVIEW AND APPROVAL OF NUCLEAR FACILITY SAFETY BASIS DOCUMENTS (DOCUMENTED SAFETY ANALYSES AND TECHNICAL SAFETY REQUIREMENTS) U.S. Department of Energy AREA SAFT Washington, DC 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information

  10. Notice of Office of Management and Budget Action to Approve with Change the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Collection Request (ICR) for a New Collection for OE Recovery Act Financial Assistance Grants | Department of Energy a New Collection for OE Recovery Act Financial Assistance Grants Notice of Office of Management and Budget Action to Approve with Change the Information Collection Request (ICR) for a New Collection for OE Recovery Act Financial Assistance Grants Notice of Office of Management and Budget Action to Approve with Change as an emergency action for six months the

  11. Notice of Office of Management and Budget Action to Approve with Change the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Collection Request (ICR) for an Extension of the ICR for OE Recovery Act Financial Assistance Grants | Department of Energy an Extension of the ICR for OE Recovery Act Financial Assistance Grants Notice of Office of Management and Budget Action to Approve with Change the Information Collection Request (ICR) for an Extension of the ICR for OE Recovery Act Financial Assistance Grants Notice of Office of Management and Budget Action to Approve with Change the Information Collection

  12. HNF-53759 Revision 0 Approved for Public Release Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    759 Revision 0 Approved for Public Release Further Dissemination Unlimited Summer Bat Monitoring Report for Calendar Year 2012 Prepared for the U.S. Department of Energy Assistant Secretary for Environmental Management Contractor for the U.S. Department of Energy under Contract DE-AC06-09RL14728 P.O. Box 650 Richland, Washington 99352 HNF-53759 Revision 0 This page intentionally left blank. HNF-53759 Revision 0 Approved for Public Release Further Dissemination Unlimited Summer Bat Monitoring

  13. Intergovernmental Programs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs The Office of Environmental Management supports, by means of grants and cooperative agreements, a number of

  14. Program Update

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    April-June 2014 issue of the U.S. Department of Energy (DOE) Offce of Legacy Management (LM) Program Update. This publication is designed to provide a status of activities within LM. Please direct all comments and inquiries to lm@hq.doe.gov. April-June 2014 Visit us at http://energy.gov/lm/ Goal 4 Optimizing the Use of Federal Lands Through Disposition The foundation of the U.S. Department of Energy (DOE) Offce of Legacy Manage- ment's (LM) Goal 4, "Optimize the use of land and

  15. Program Update

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 issue of the U.S. Department of Energy (DOE) Offce of Legacy Management (LM) Program Update. This publication is designed to provide a status of activities within LM. Please direct all comments and inquiries to lm@hq.doe.gov. January-March 2015 Visit us at http://energy.gov/lm/ Goal 4 Successful Transition from Mound Site to Mound Business Park Continues The Mound Business Park attracts a variety of businesses to the former U.S. Department of Energy (DOE) Mound, Ohio, Site in Miamisburg. In

  16. Geothermal Technologies Program Overview - Peer Review Program

    SciTech Connect (OSTI)

    Milliken, JoAnn

    2011-06-06

    This Geothermal Technologies Program presentation was delivered on June 6, 2011 at a Program Peer Review meeting. It contains annual budget, Recovery Act, funding opportunities, upcoming program activities, and more.

  17. APS TBC performance on directionally-solidified superalloy substrates with HVOF NiCoCrAlYHfSi bond coatings

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lance, Michael J.; Unocic, Kinga A.; Haynes, James A.; Pint, Bruce A.

    2015-09-04

    Directionally-solidified (DS) superalloy components with advanced thermal barrier coatings (TBC) to lower the metal operating temperature have the potential to replace more expensive single crystal superalloys for large land-based turbines. In order to assess relative TBC performance, furnace cyclic testing was used with superalloys 1483, X4 and Hf-rich DS 247 substrates and high velocity oxygen fuel (HVOF)-NiCoCrAlYHfSi bond coatings at 1100 °C with 1-h cycles in air with 10% H2O. With these coating and test conditions, there was no statistically-significant effect of substrate alloy on the average lifetime of the air plasma sprayed (APS) yttria-stabilized zirconia (YSZ) top coatings onmore » small coupons. Using photo-stimulated luminescence piezospectroscopy maps at regular cycling intervals, the residual compressive stress in the α-Al2O3 scale underneath the YSZ top coating and on a bare bond coating was similar for all three substrates and delaminations occurred at roughly the same rate and frequency. As a result, x-ray fluorescence (XRF) measurements collected from the bare bond coating surface revealed higher Ti interdiffusion occurring with the 1483 substrate, which contained the highest Ti content.« less

  18. A linear MOSFET regulation system to improve the performance of the booster-ramping power supplies at the APS.

    SciTech Connect (OSTI)

    Feng, G.; Deriy, B.; Wang, J.; Shang, H.; Xu, S.

    2008-01-01

    The APS booster ring uses ramping power supplies to power the sextupole, quadrupole, and dipole magnets as the beam energy ramps up linearly to 7 GeV. Due to the circuit topology used, those supplies are unable to follow the linear ramp to the desired accuracy. The best regulation achieved is 0.5% while 0.1 % is desired. In addition to the unsatisfying regulation, those supplies are sensitive to AC line perturbations and are not able to reject AC line noises higher than a few tens of Hertz. To improve the performance, a linear MOSFET regulation system using paralleled MOSFET devices in series with the power supply is proposed. The system uses a real-time current feedback loop to force the MOSFETs to work in the linear operation mode. By using this linear MOSFET regulator, the voltage drop on MOSFETs, and hence the voltage imposed on magnets, can be regulated very quickly. As a result, the regulation of the magnet current can be improved significantly. Experiments and simulation have been performed to verify the proposed method. Results show that, with the linear regulator, the current regulation can be improved to better than 0.1%. Because of the high bandwidth of the linear regulator, it can reduce the harmonic content in the output current as well as reject the AC line disturbance.

  19. HEATKAU Program.

    Energy Science and Technology Software Center (OSTI)

    2013-07-24

    Version 00 Calculations of the decay heat is of great importance for the design of the shielding of discharged fuel, the design and transport of fuel-storage flasks and the management of the resulting radioactive waste. These are relevant to safety and have large economic and legislative consequences. In the HEATKAU code, a new approach has been proposed to evaluate the decay heat power after a fission burst of a fissile nuclide for short cooling time.more » This method is based on the numerical solution of coupled linear differential equations that describe decays and buildups of the minor fission products (MFPs) nuclides. HEATKAU is written entirely in the MATLAB programming environment. The MATLAB data can be stored in a standard, fast and easy-access, platform- independent binary format which is easy to visualize.« less

  20. Machinist Pipeline/Apprentice Program Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    cost effective than previous time-based programs Moves apprentices to journeyworker status more quickly Program Coordinator: Heidi Hahn Email: hahn@lanl.gov Phone number:...