National Library of Energy BETA

Sample records for approval lighting processing

  1. Product Review Process and Approvals

    Broader source: Energy.gov [DOE]

    Publications, exhibits, logos, and templates developed by EERE staff, laboratories, and contractors must be reviewed and approved by the Product Governance Team (PGT). The PGT meets every other week.

  2. Invoice Approval Process Roadmap (Processing Receipts) May 27, 2010

    E-Print Network [OSTI]

    Li, X. Rong

    Invoice Approval Process Roadmap (Processing Receipts) May 27, 2010 1 Scenario: The Match Exception on the instruction page. #9 #5 #11 #9 #7 Receipt #1 Receipt #2 #12;Invoice Approval Process Roadmap (Processing the PO ID from the Match Exception Report in the ID field. (Use Roadmap) 6. Select, Search 7. Check

  3. POLICY GUIDANCE MEMORANDUM #11A Approval Process for Dual Compensation...

    Office of Environmental Management (EM)

    1A Approval Process for Dual Compensation Waivers for Reemployed Annuitants POLICY GUIDANCE MEMORANDUM 11A Approval Process for Dual Compensation Waivers for Reemployed Annuitants...

  4. Faculty Search Approval Process Unit Leader's Guide

    E-Print Network [OSTI]

    Hill, Jeffrey E.

    Faculty Search Approval Process Unit Leader's Guide This document is intended to guide unit leaders-renewal or dismissal Process: As a policy, these positions will be retained in the unit for priority needs. Requests: Reassigned to administration Transfer to another unit Resignation not related to counsel out Retirement Death

  5. Process for evaluating, approving, and monitoring Requests for approval of outside employment

    E-Print Network [OSTI]

    Tullos, Desiree

    for Approval for Outside Activities," the unit leader will review the request and make a timely decision. If the unit leader approves, he or she will forward it to the appropriate associate dean, who will then review, there is an approval process. The OSU Faculty Handbook provides a "Conflict of Commitment Policy" that provides general

  6. ISA Approves Standard for Wireless Automation in Process Control...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official...

  7. Motor Fleet Approval Process Page 1 UNCW Travel System

    E-Print Network [OSTI]

    Olszewski Jr., Edward A.

    Motor Fleet Approval Process Page 1 UNCW Travel System Motor Fleet Approval Process Preparer submits the motor fleet vehicle request; and the request is automatically routed to the traveler an e-mail notifying them there are pending motor fleet signatures. If you are both supervisor

  8. Policy and IT Standards Development Process Development ApprovalInitiation

    E-Print Network [OSTI]

    New Mexico, University of

    Policy and IT Standards Development Process Development ApprovalInitiation Main Campus Health Sciences Audit Academic, Technology, Project, Legal or Administrative Need IT Standard or UNM Policy? Policy Office convenes committee, vetting process with stakeholders and groups Campus Executives, Regents

  9. Journal List Substitution Process Approved September 8, 2011

    E-Print Network [OSTI]

    Selmic, Sandra

    Journal List Substitution Process Approved September 8, 2011 JOURNAL LIST SUBSTITUTION PROCESS Each discipline-specific journal list area can be amended after a new list is developed according to established a way to adjust the new journal list so that the journal list more closely matches the strengths

  10. UNIVERSITY POLICY APPROVAL PROCESS Definition of a University Policy

    E-Print Network [OSTI]

    UNIVERSITY POLICY APPROVAL PROCESS Definition of a University Policy Applies broadly, more than one compliance Promotes effectiveness/reduces risk. Roles Policy Manager (PM) Manages the policy review process Publishes policies and related information Notifies university community of new and revised policies

  11. The accelerated approval process in oncology : an examination of the conversion rate of approved therapies to full approval

    E-Print Network [OSTI]

    Kim, Jean Jinsun

    2006-01-01

    In 1992, Accelerated Approval, or Subpart H approval, was added to the NDA regulations so promising products that provide a meaningful therapeutic benefit for serious or life-threatening diseases could be introduced to the ...

  12. ISA Approves Standard for Wireless Automation in Process Control...

    Broader source: Energy.gov (indexed) [DOE]

    for Wireless Automation in Process Control Applications More Documents & Publications Wireless System Considerations When Implementing NERC Critical Infrastructure Protection...

  13. EFT for electroweak processes of light nuclei

    E-Print Network [OSTI]

    Tae-Sun Park

    2003-09-08

    Recently we succeeded to make a reliable EFT prediction in a totally parameter-free manner for the $S$ factors for the solar $pp$ and $hep$ processes, $p+p\\to d + e^+ +\

  14. Process for converting light alkanes to higher hydrocarbons

    DOE Patents [OSTI]

    Noceti, Richard P. (Pittsburgh, PA); Taylor, Charles E. (Pittsburgh, PA)

    1988-01-01

    A process is disclosed for the production of aromatic-rich, gasoline boiling range hydrocarbons from the lower alkanes, particularly from methane. The process is carried out in two stages. In the first, alkane is reacted with oxygen and hydrogen chloride over an oxyhydrochlorination catalyst such as copper chloride with minor proportions of potassium chloride and rare earth chloride. This produces an intermediate gaseous mixture containing water and chlorinated alkanes. The chlorinated alkanes are contacted with a crystalline aluminosilicate catalyst in the hydrogen or metal promoted form to produce gasoline range hydrocarbons with a high proportion of aromatics and a small percentage of light hydrocarbons (C.sub.2 -C.sub.4). The light hydrocarbons can be recycled for further processing over the oxyhydrochlorination catalyst.

  15. Light-emitting block copolymers composition, process and use

    DOE Patents [OSTI]

    Ferraris, John P.; Gutierrez, Jose J.

    2006-11-14

    Generally, and in one form, the present invention is a composition of light-emitting block copolymer. In another form, the present invention is a process producing a light-emitting block copolymers that intends polymerizing a first di(halo-methyl) aromatic monomer compound in the presence of an anionic initiator and a base to form a polymer and contacting a second di(halo-methyl) aromatic monomer compound with the polymer to form a homopolymer or block copolymer wherein the block copolymer is a diblock, triblock, or star polymer. In yet another form, the present invention is an electroluminescent device comprising a light-emitting block copolymer, wherein the electroluminescent device is to be used in the manufacturing of optical and electrical devices.

  16. Approved Module Information for CE3104, 2014/5 Module Title/Name: Process & Pollution Control Module Code: CE3104

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    , treatment principles, discharge to sewers and watercourses * Air Pollution - effects of pollutants, typesApproved Module Information for CE3104, 2014/5 Module Title/Name: Process & Pollution Control - Understand how a chemical process is controlled safely and efficiently Pollution Control #12;* The impact

  17. Introduction The degree action approval processes described in this document reflect the official internal

    E-Print Network [OSTI]

    Buehrer, R. Michael

    from the Board of Visitors (BOV) taking approximately 12 months from pre-approval. For example, a new degree proposal that is preapproved in Spring 2013 could be ready for review and approval by the BOV in Spring 2014. Once BOV approval for a degree action is secured, the proposal is forwarded to SCHEV

  18. Hair treatment process providing dispersed colors by light diffraction

    DOE Patents [OSTI]

    Sutton, Richard Matthew Charles; Lamartine, Bruce Carvell; Orler, E. Bruce; Song, Shuangqi

    2015-12-22

    A hair treatment process for providing dispersed colors by light diffraction including (a) coating the hair with a material comprising a polymer, (b) pressing the hair with a pressing device including one or more surfaces, and (c) forming a secondary nanostructured surface pattern on the hair that is complementary to the primary nanostructured surface pattern on the one or more surfaces of the pressing device. The secondary nanostructured surface pattern diffracts light into dispersed colors that are visible on the hair. The section of the hair is pressed with the pressing device for from about 1 to 55 seconds. The polymer has a glass transition temperature from about 55.degree. C. to about 90.degree. C. The one or more surfaces include a primary nanostructured surface pattern.

  19. Module Information for CE3104, 2015/6 -APPROVED Module Title/Name: Process & Pollution Control Module Code: CE3104

    E-Print Network [OSTI]

    Rebollo-Neira, Laura

    - characteristics, variation with source, treatment principles, discharge to sewers and watercourses - Air PollutionModule Information for CE3104, 2015/6 - APPROVED Module Title/Name: Process & Pollution Control on piping and instrumentation diagrams (P&ID). Indicative Module Content: Pollution Prevention and Control

  20. Approved Module Information for CE2110, 2014/5 Module Title/Name: Process Laboratory Module Code: CE2110

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for CE2110, 2014/5 Module Title/Name: Process Laboratory Module Code: CE2110 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits: 10 Module Management Information Module Leader Name John Brammer Email Address brammejg

  1. Approved Module Information for CE4018, 2014/5 Module Title/Name: Advanced Particle Processing Module Code: CE4018

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for CE4018, 2014/5 Module Title/Name: Advanced Particle Processing Module Code: CE4018 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits: 10 Module Management Information Module Leader Name Mark Leaper Email Address m

  2. Approved Module Information for CE3013, 2014/5 Module Title/Name: Particle Processing Module Code: CE3013

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for CE3013, 2014/5 Module Title/Name: Particle Processing Module Code: CE3013 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits: 10 Module Management Information Module Leader Name Mark Leaper Email Address m

  3. Functional Polymer Architectures for Solution Processed Organic Light Emitting Diodes

    E-Print Network [OSTI]

    Poulsen, Daniel Andrew

    2010-01-01

    developing new OLED displays and lighting devices withOLED technology has reached a point where highly efficient thin film devices which rival other lighting

  4. Light-Triggered Myosin Activation for Probing Dynamic Cellular Processes

    E-Print Network [OSTI]

    Goguen, Brenda N.

    Shining light on myosin: The incorporation of a caging group onto the essential phosphoserine residue of myosin by protein semisynthesis enables light-triggered activation of the protein (see picture). Caging eliminates ...

  5. Hair treatment process providing dispersed colors by light diffraction

    DOE Patents [OSTI]

    Lamartine, Bruce Carvell; Orler, E. Bruce; Sutton, Richard Matthew Charles; Song, Shuangqi

    2014-11-11

    Hair was coated with polymer-containing fluid and then hot pressed to form a composite of hair and a polymer film imprinted with a nanopattern. Polychromatic light incident on the nanopattern is diffracted into dispersed colored light.

  6. Hair treatment process providing dispersed colors by light diffraction

    DOE Patents [OSTI]

    Lamartine, Bruce Carvell; Orler, E. Bruce; Sutton, Richard Matthew Charles; Song, Shuangqi

    2013-12-17

    Hair was coated with polymer-containing fluid and then hot pressed to form a composite of hair and a polymer film imprinted with a nanopattern. Polychromatic light incident on the nanopattern is diffracted into dispersed colored light.

  7. Injection and transport processes in organic light emitting diodes based on N. Huby a,b

    E-Print Network [OSTI]

    Boyer, Edmond

    1 Injection and transport processes in organic light emitting diodes based on a silole. N. Huby a- conductors in light emitting diodes1 . The different fields of research around the organic electronic allowed

  8. Approved Module Information for EE3SPR, 2014/5 Module Title/Name: Signal Processing Module Code: EE3SPR

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for EE3SPR, 2014/5 Module Title/Name: Signal Processing Module Code: EE the analytical basis of discrete time and digital signal processing. To introduce the design and implementation of real- time digital signal processing systems. To extend the concepts to other areas such as image

  9. Wide Area Thermal Processing of Light Emitting Materials

    SciTech Connect (OSTI)

    Duty, Chad E; Joshi, Pooran C; Jellison Jr, Gerald Earle; Angelini, Joseph Attilio; Sabau, Adrian S

    2011-10-01

    Laboratory laser materials synthesis of wide bandgap materials has been successfully used to create white light emitting materials (LEMs). This technology development has progressed to the exploration on design and construction of apparatus for wide area doping and phase transformation of wide bandgap material substrates. The objective of this proposal is to develop concepts for wide area doping and phase transformation based on AppliCote Associates, LLC laser technology and ORNL high density pulsed plasma arc technology.

  10. Integrated porous-silicon light-emitting diodes: A fabrication process using graded doping profiles

    SciTech Connect (OSTI)

    Barillaro, G.; Diligenti, A.; Pieri, F.; Fuso, F.; Allegrini, M.

    2001-06-25

    A fabrication process, compatible with an industrial bipolar+complementary metal{endash}oxide{endash}semiconductor (MOS)+diffusion MOS technology, has been developed for the fabrication of efficient porous-silicon-based light-emitting diodes. The electrical contact is fabricated with a double n{sup +}/p doping, achieving a high current injection efficiency and thus lower biasing voltages. The anodization is performed as the last step of the process, thus reducing potential incompatibilities with industrial processes. The fabricated devices show yellow-orange electroluminescence, visible with the naked eye in room lighting. A spectral characterization of light emission is presented and briefly discussed. {copyright} 2001 American Institute of Physics.

  11. Approved Module Information for CE1004, 2014/5 Module Title/Name: Process and Product Design Module Code: CE1004

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    . * Concept of scale * Product innovation - customer needs, ideas generation, ideas selection, productApproved Module Information for CE1004, 2014/5 Module Title/Name: Process and Product Design Module on a realistic project Product Design * To understand the difference between commodity and speciality chemicals

  12. Approved Module Information for ME1F18, 2014/5 Module Title/Name: Materials & Processes Module Code: ME1F18

    E-Print Network [OSTI]

    Rebollo-Neira, Laura

    Approved Module Information for ME1F18, 2014/5 Module Title/Name: Materials & Processes Module Code: ME1F18 School: Engineering and Applied Science Module Type: Foundation New Module? No Module Credits: 10 Module Management Information Module Leader Name Lee Jenkins Email Address jenkinl1@aston

  13. Approved Module Information for CS4670, 2014/5 Module Title/Name: Software Process and Management Module Code: CS4670

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    management: software cost estimation, software, COCOMO model Quality management: nature of quality; quality control, assurance and management systems; quality models and metrics; software management ? testingApproved Module Information for CS4670, 2014/5 Module Title/Name: Software Process and Management

  14. Online monitoring of a belt grinding process by using a light scattering method

    SciTech Connect (OSTI)

    Boehm, Johannes; Vernes, Andras; Vorlaufer, Georg; Vellekoop, Michael

    2010-10-20

    Industrially ground surfaces often have a characteristic surface topography known as chatter marks. The surface finishing is mainly monitored by optical measurement techniques. In this work, the monitoring of an industrial belt grinding process with a light scattering sensor is presented. Although this technique is primarily applied for parametric surface roughness analysis, here it is shown that it enables also the measurement of the surface topography, i.e., the chatter marks occurring during the belt grinding process. In particular, it is proven that the light scattering method is appropriate to measure online the topography of chatter marks. Furthermore, the frequency analysis of the data reveals that the wavelength of chatter marks strongly depends on process parameters, such as the grinding speed.

  15. Vacuum-free lamination of low work function cathode for efficient solution-processed organic light-emitting diodes

    E-Print Network [OSTI]

    Meng, Hsin-Fei

    -coated organic light-emitting diode is transferred from a soft polydimethylsiloxane (PDMS) mold by lamination, or blade coating [1,2] for organic light emitting diode (OLED) as well as solar cell. The top electrodeVacuum-free lamination of low work function cathode for efficient solution-processed organic light-emitting

  16. Formation Process of a Light Bridge Revealed with the Hinode Solar Optical Telescope

    E-Print Network [OSTI]

    Y. Katsukawa; T. Yokoyama; T. E. Berger; K. Ichimoto; M. Kubo; B. W. Lites; S. Nagata; T. Shimizu; R. A. Shine; Y. Suematsu; T. D. Tarbell; A. M. Title; S. Tsuneta

    2007-09-17

    The Solar Optical Telescope (SOT) aboard HINODE successfully and continuously observed a formation process of a light bridge in a matured sunspot of the NOAA active region 10923 for several days with high spatial resolution. During its formation, many umbral dots were observed emerging from the leading edges of penumbral filaments, and intruding into the umbra rapidly. The precursor of the light bridge formation was also identified as the relatively slow inward motion of the umbral dots which emerged not near the penumbra, but inside the umbra. The spectro-polarimeter on SOT provided physical conditions in the photosphere around the umbral dots and the light bridges. We found the light bridges and the umbral dots had significantly weaker magnetic fields associated with upflows relative to the core of the umbra, which implies that there was hot gas with weak field strength penetrating from subphotosphere to near the visible surface inside those structures. There needs to be a mechanism to drive the inward motion of the hot gas along the light bridges. We suggest that the emergence and the inward motion are triggered by a buoyant penumbral flux tube as well as the subphotospheric flow crossing the sunspot.

  17. Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and-E C H N13,CenterCenterLighting Sign In

  18. Unified study of $J/?\\to PV$, $P?^{(*)}$ and light hadron radiative processes

    E-Print Network [OSTI]

    Yun-Hua Chen; Zhi-Hui Guo; Bing-Song Zou

    2014-12-26

    Within the framework of the effective Lagrangian approach, we perform a thorough analysis of the $J/\\psi \\to P\\gamma(\\gamma^*)$, $J/\\psi \\to VP$, $V\\to P\\gamma(\\gamma^*)$, $P\\to V\\gamma(\\gamma^*)$ and $P\\to\\gamma\\gamma(\\gamma^*)$ processes, where $V$ stand for light vector resonances, $P$ stand for light pseudoscalar mesons, and $\\gamma^*$ subsequently decays into lepton pairs. The processes with light pseudoscalar mesons $\\eta$ and $\\eta'$ are paid special attention to and the two-mixing-angle scheme is employed to describe their mixing. The four mixing parameters both in singlet-octet and quark-flavor bases are updated in this work. We confirm that the $J/\\psi \\to \\eta(\\eta^{\\prime})\\gamma^{(*)}$ processes are predominantly dominated by the $J/\\psi\\to \\eta_c \\gamma^{*} \\to \\eta(\\eta^{\\prime})\\gamma^{(*)}$ mechanism. Predictions for the $J/\\psi \\to P \\mu^+\\mu^-$ are presented. A detailed discussion on the interplay between electromagnetic and strong transitions in the $J/\\psi \\to VP$ decays is given.

  19. PRODUCTION OF LIGHT-ELEMENT PRIMARY PROCESS NUCLEI IN NEUTRINO-DRIVEN WINDS

    SciTech Connect (OSTI)

    Arcones, A. [Institut fuer Kernphysik, TU Darmstadt, Schlossgartenstr. 9, 64289 Darmstadt (Germany); Montes, F. [Joint Institute for Nuclear Astrophysics, Michigan State University, East Lansing, MI 48824 (United States)

    2011-04-10

    We present first comparisons between light-element primary process (LEPP) abundances observed in some ultra metal-poor (UMP) stars and nucleosynthesis calculations based on long-time hydrodynamical simulations of core-collapse supernovae and their neutrino-driven wind. UMP star observations indicate that Z {>=} 38 elements include the contributions of at least two nucleosynthesis components: r-process nuclei that are synthesized by rapid neutron capture in a yet unknown site and LEPP elements (mainly Sr, Y, and Zr). We show that neutrino-driven wind simulations can explain the observed LEPP pattern. We explore in detail the sensitivity of the calculated abundances to the electron fraction, which is a key nucleosynthesis parameter but poorly known due to uncertainties in neutrino interactions and transport. Our results show that the observed LEPP pattern can be reproduced in proton- and neutron-rich winds.

  20. Process development for the fabrication of light emitting vacuum field emission triodes 

    E-Print Network [OSTI]

    Williams, Roger T.

    1994-01-01

    . Light emitting diodes and triodes are also fabricated to address the feasibility of their application to flat panel displays....

  1. A process for evaluation and state approval of an emergency response atmospheric dispersion model for Rocky Flats, Colorado

    SciTech Connect (OSTI)

    Hodgin, C.R.

    1991-11-06

    This document contains copies of the vugraphs used by C. R. Hodgin for the November 6, 1991 presentation summarizing the process to be used for evaluation of the Emergency Response Dispersion Model. (MHB)

  2. DEVELOPMENT AND OPTIMIZATION OF GAS-ASSISTED GRAVITY DRAINAGE (GAGD) PROCESS FOR IMPROVED LIGHT OIL RECOVERY

    SciTech Connect (OSTI)

    Dandina N. Rao; Subhash C. Ayirala; Madhav M. Kulkarni; Amit P. Sharma

    2004-10-01

    This report describes the progress of the project ''Development and Optimization of Gas-Assisted Gravity Drainage (GAGD) Process for Improved Light Oil Recovery'' for the duration of the second project year (October 1, 2003--September 30, 2004). There are three main tasks in this research project. Task 1 is scaled physical model study of GAGD process. Task 2 is further development of vanishing interfacial tension (VIT) technique for miscibility determination. Task 3 is determination of multiphase displacement characteristics in reservoir rocks. In Section I, preliminary design of the scaled physical model using the dimensional similarity approach has been presented. Scaled experiments on the current physical model have been designed to investigate the effect of Bond and capillary numbers on GAGD oil recovery. Experimental plan to study the effect of spreading coefficient and reservoir heterogeneity has been presented. Results from the GAGD experiments to study the effect of operating mode, Bond number and capillary number on GAGD oil recovery have been reported. These experiments suggest that the type of the gas does not affect the performance of GAGD in immiscible mode. The cumulative oil recovery has been observed to vary exponentially with Bond and capillary numbers, for the experiments presented in this report. A predictive model using the bundle of capillary tube approach has been developed to predict the performance of free gravity drainage process. In Section II, a mechanistic Parachor model has been proposed for improved prediction of IFT as well as to characterize the mass transfer effects for miscibility development in reservoir crude oil-solvent systems. Sensitivity studies on model results indicate that provision of a single IFT measurement in the proposed model is sufficient for reasonable IFT predictions. An attempt has been made to correlate the exponent (n) in the mechanistic model with normalized solute compositions present in both fluid phases. IFT measurements were carried out in a standard ternary liquid system of benzene, ethanol and water using drop shape analysis and capillary rise techniques. The experimental results indicate strong correlation among the three thermodynamic properties solubility, miscibility and IFT. The miscibility determined from IFT measurements for this ternary liquid system is in good agreement with phase diagram and solubility data, which clearly indicates the sound conceptual basis of VIT technique to determine fluid-fluid miscibility. Model fluid systems have been identified for VIT experimentation at elevated pressures and temperatures. Section III comprises of the experimental study aimed at evaluating the multiphase displacement characteristics of the various gas injection EOR process performances using Berea sandstone cores. During this reporting period, extensive literature review was completed to: (1) study the gravity drainage concepts, (2) identify the various factors influencing gravity stable gas injection processes, (3) identify various multiphase mechanisms and fluid dynamics operative during the GAGD process, and (4) identify important dimensionless groups governing the GAGD process performance. Furthermore, the dimensional analysis of the GAGD process, using Buckingham-Pi theorem to isolate the various dimensionless groups, as well as experimental design based on these dimensionless quantities have been completed in this reporting period. On the experimental front, recommendations from previous WAG and CGI have been used to modify the experimental protocol. This report also includes results from scaled preliminary GAGD displacements as well as the details of the planned GAGD corefloods for the next quarter. The technology transfer activities have mainly consisted of preparing technical papers, progress reports and discussions with industry personnel for possible GAGD field tests.

  3. Development and Optimization of Gas-Assisted Gravity Drainage (GAGD) Process for Improved Light Oil Recovery

    SciTech Connect (OSTI)

    Dandina N. Rao; Subhash C. Ayirala; Madhav M. Kulkarni; Wagirin Ruiz Paidin; Thaer N. N. Mahmoud; Daryl S. Sequeira; Amit P. Sharma

    2006-09-30

    This is the final report describing the evolution of the project ''Development and Optimization of Gas-Assisted Gravity Drainage (GAGD) Process for Improved Light Oil Recovery'' from its conceptual stage in 2002 to the field implementation of the developed technology in 2006. This comprehensive report includes all the experimental research, models developments, analyses of results, salient conclusions and the technology transfer efforts. As planned in the original proposal, the project has been conducted in three separate and concurrent tasks: Task 1 involved a physical model study of the new GAGD process, Task 2 was aimed at further developing the vanishing interfacial tension (VIT) technique for gas-oil miscibility determination, and Task 3 was directed at determining multiphase gas-oil drainage and displacement characteristics in reservoir rocks at realistic pressures and temperatures. The project started with the task of recruiting well-qualified graduate research assistants. After collecting and reviewing the literature on different aspects of the project such gas injection EOR, gravity drainage, miscibility characterization, and gas-oil displacement characteristics in porous media, research plans were developed for the experimental work to be conducted under each of the three tasks. Based on the literature review and dimensional analysis, preliminary criteria were developed for the design of the partially-scaled physical model. Additionally, the need for a separate transparent model for visual observation and verification of the displacement and drainage behavior under gas-assisted gravity drainage was identified. Various materials and methods (ceramic porous material, Stucco, Portland cement, sintered glass beads) were attempted in order to fabricate a satisfactory visual model. In addition to proving the effectiveness of the GAGD process (through measured oil recoveries in the range of 65 to 87% IOIP), the visual models demonstrated three possible multiphase mechanisms at work, namely, Darcy-type displacement until gas breakthrough, gravity drainage after breakthrough and film-drainage in gas-invaded zones throughout the duration of the process. The partially-scaled physical model was used in a series of experiments to study the effects of wettability, gas-oil miscibility, secondary versus tertiary mode gas injection, and the presence of fractures on GAGD oil recovery. In addition to yielding recoveries of up to 80% IOIP, even in the immiscible gas injection mode, the partially-scaled physical model confirmed the positive influence of fractures and oil-wet characteristics in enhancing oil recoveries over those measured in the homogeneous (unfractured) water-wet models. An interesting observation was that a single logarithmic relationship between the oil recovery and the gravity number was obeyed by the physical model, the high-pressure corefloods and the field data.

  4. THE ORIGINS OF LIGHT AND HEAVY R-PROCESS ELEMENTS IDENTIFIED BY CHEMICAL TAGGING OF METAL-POOR STARS

    SciTech Connect (OSTI)

    Tsujimoto, Takuji; Shigeyama, Toshikazu

    2014-11-01

    Growing interests in neutron star (NS) mergers as the origin of r-process elements have sprouted since the discovery of evidence for the ejection of these elements from a short-duration ?-ray burst. The hypothesis of a NS merger origin is reinforced by a theoretical update of nucleosynthesis in NS mergers successful in yielding r-process nuclides with A > 130. On the other hand, whether the origin of light r-process elements are associated with nucleosynthesis in NS merger events remains unclear. We find a signature of nucleosynthesis in NS mergers from peculiar chemical abundances of stars belonging to the Galactic globular cluster M15. This finding combined with the recent nucleosynthesis results implies a potential diversity of nucleosynthesis in NS mergers. Based on these considerations, we are successful in the interpretation of an observed correlation between [light r-process/Eu] and [Eu/Fe] among Galactic halo stars and accordingly narrow down the role of supernova nucleosynthesis in the r-process production site. We conclude that the tight correlation by a large fraction of halo stars is attributable to the fact that core-collapse supernovae produce light r-process elements while heavy r-process elements such as Eu and Ba are produced by NS mergers. On the other hand, stars in the outlier, composed of r-enhanced stars ([Eu/Fe] ? +1) such as CS22892-052, were exclusively enriched by matter ejected by a subclass of NS mergers that is inclined to be massive and consist of both light and heavy r-process nuclides.

  5. Approved Module Information for CE2105, 2014/5 Module Title/Name: Process Simulation Module Code: CE2105

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : CE2105 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module processes with solids * Coal drying * Coal combustion Module Delivery Methods of Delivery & Learning Hours weighting (including approaches to formative assessment as well as summative): Assessment Type Category

  6. Shedding light on processes that control particle export and flux attenuation in the twilight zone of the open ocean

    E-Print Network [OSTI]

    Buesseler, Ken

    Shedding light on processes that control particle export and flux attenuation in the twilight zone and low surface export and subsurface flux attenuation. The ocean's ``twilight zone'' is defined). Sediment traps allowed assess- ment of the relationship among surface algal productivity, particle export

  7. New Nuclear Reaction Flow during r-Process Nucleosynthesis in Supernovae: Critical Role of Light Neutron-Rich Nuclei

    E-Print Network [OSTI]

    M. Terasawa; K. Sumiyoshi; T. Kajino; G. J. Mathews; I. Tanihata

    2001-07-19

    We study the role of light neutron-rich nuclei during r-process nucleosynthesis in supernovae. Most previous studies of the r-process have concentrated on the reaction flow of heavy unstable nuclei. Although the nuclear reaction network includes a few thousand heavy nuclei, only limited reaction flow through light-mass nuclei near the stability line has been used in those studies. However, in a viable scenario of the r-process in neutrino-driven winds, the initial condition is a high-entropy hot plasma consisting of neutrons, protons, and electron-positron pairs experiencing an intense flux of neutrinos. In such environments light-mass nuclei as well as heavy nuclei are expected to play important roles in the production of seed nuclei and r-process elements. Thus, we have extended our fully implicit nuclear reaction network so that it includes all nuclei up to the neutron drip line for Z $ \\leq 10$, in addition to a larger network for Z $ \\geq 10$. In the present nucleosynthesis study, we utilize a wind model of massive SNeII explosions to study the effects of this extended network. We find that a new nuclear-reaction flow path opens in the very light neutron-rich region. This new nuclear reaction flow can change the final heavy-element abundances by as much as an order of magnitude.

  8. Policy #1001 Development, Approval and Maintenance of University Policy 1 OLD DOMINION UNIVERSITY

    E-Print Network [OSTI]

    Policy #1001 ­ Development, Approval and Maintenance of University Policy 1 OLD DOMINION UNIVERSITY University Policy Policy #1001 DEVELOPMENT, APPROVAL AND MAINTENANCE OF UNIVERSITY POLICY Responsible 4, 2012 A. PURPOSE This policy defines the process for developing, reviewing, approving

  9. Form Approved

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowers 2015Values shownFootageApproved OMB

  10. Form Approved

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowers 2015Values shownFootageApproved

  11. Navigation Labels and Approval

    Broader source: Energy.gov [DOE]

    EERE has commonly used and approved navigation labels. To maintain consistency in navigation across EERE, the EERE Template Coordinator reviews and approves requests for new navigation labels and...

  12. Light-assisted ion-neutral reactive processes in the cold regime: radiative molecule formation vs. charge exchange

    E-Print Network [OSTI]

    Hall, Felix H J; Bouloufa, Nadia; Dulieu, Olivier; Willitsch, Stefan

    2011-01-01

    We present a combined experimental and theoretical study of cold reactive collisions between laser-cooled Ca+ ions and Rb atoms in an ion-atom hybrid trap. We observe rich chemical dynamics consisting of a complex interplay between non-adiabatic and radiative charge exchange as well as radiative molecule formation which are interpreted using high-level electronic structure calculations. We study the role of light-assisted processes and show that the efficiency of the dominant chemical pathways is considerably enhanced in excited reaction channels. Our results point to a general framework of radiative and non-radiative processes dominating the cold chemistry in ion-atom hybrid traps.

  13. The origins of light and heavy r-process elements identified by chemical tagging of metal-poor stars

    E-Print Network [OSTI]

    Tsujimoto, Takuji

    2014-01-01

    Growing interests in neutron star (NS) mergers as the origin of r-process elements have sprouted since the discovery of evidence for the ejection of these elements from a short-duration gamma-ray burst. The hypothesis of a NS merger origin is reinforced by a theoretical update of nucleosynthesis in NS mergers successful in yielding r-process nuclides with A>130. On the other hand, whether the origin of light r-process elements are associated with nucleosynthesis in NS merger events remains unclear. We find a signature of nucleosynthesis in NS mergers from peculiar chemical abundances of stars belonging to the Galactic globular cluster M15. This finding combined with the recent nucleosynthesis results implies a potential diversity of nucleosynthesis in NS mergers. Based on these considerations, we are successful in the interpretation of an observed correlation between [light r-process/Eu] and [Eu/Fe] among Galactic halo stars and accordingly narrow down the role of supernova nucleosynthesis in the r-process pr...

  14. Light-induced hysteresis and recovery behaviors in photochemically activated solution-processed metal-oxide thin-film transistors

    SciTech Connect (OSTI)

    Jo, Jeong-Wan; Park, Sung Kyu E-mail: skpark@cau.ac.kr; Kim, Yong-Hoon E-mail: skpark@cau.ac.kr

    2014-07-28

    In this report, photo-induced hysteresis, threshold voltage (V{sub T}) shift, and recovery behaviors in photochemically activated solution-processed indium-gallium-zinc oxide (IGZO) thin-film transistors (TFTs) are investigated. It was observed that a white light illumination caused negative V{sub T} shift along with creation of clockwise hysteresis in electrical characteristics which can be attributed to photo-generated doubly ionized oxygen vacancies at the semiconductor/gate dielectric interface. More importantly, the photochemically activated IGZO TFTs showed much reduced overall V{sub T} shift compared to thermally annealed TFTs. Reduced number of donor-like interface states creation under light illumination and more facile neutralization of ionized oxygen vacancies by electron capture under positive gate potential are claimed to be the origin of the less V{sub T} shift in photochemically activated TFTs.

  15. Approved Module Information for CE1009, 2014/5 Module Title/Name: Introduction to Transfer Processes Module Code: CE1009

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    the student: * a knowledge of the fundamentals of heat transfer theory, and of the practical applications of conductive heat transfer theory * a knowledge of the fundamentals of fluid mechanics theory * a knowledgeApproved Module Information for CE1009, 2014/5 Module Title/Name: Introduction to Transfer

  16. Does the alpha cluster structure in light nuclei persist through the fusion process?

    E-Print Network [OSTI]

    J. Vadas; T. K. Steinbach; J. Schmidt; Varinderjit Singh; C. Haycraft; S. Hudan; R. T. deSouza; L. T. Baby; S. A. Kuvin; I. Wiedenhover

    2015-08-31

    [Background] Despite the importance of light-ion fusion in nucleosynthesis, a limited amount of data exists regarding the de-excitation following fusion for such systems. [Purpose] To explore the characteristics of alpha emission associated with the decay of light fused systems at low excitation energy. [Method] Alpha particles were detected in coincidence with evaporation residues (ER) formed by the fusion of 18O and 12C nuclei. Both alpha particles and ERs were identified on the basis of their energy and time-of-flight. ERs were characterized by their energy spectra and angular distributions while the alpha particles were characterized by their energy spectra, angular distributions, and cross-sections. [Results] While the energy spectra and angular distributions for the alpha particles are well reproduced by statistical model codes, the measured cross-section is substantially underpredicted by the models. Comparison with similar systems reveals that the fundamental quantity for the alpha cross-section is Ec.m. and not the excitation energy of the fused system. [Conclusion]The enhancement in the measured alpha cross-section as compared to the statistical model codes and its dependence with Ec.m. suggest that a coupling between pre-existing alpha cluster structure and the collision dynamics is responsible for the observed alpha cross-section.

  17. Light-Element Reaction Flow and the Conditions for r-Process Nucleosynthesis

    E-Print Network [OSTI]

    T. Sasaqui; K. Otsuki; T. Kajino; G. J. Mathews

    2006-03-18

    We deduce new constraints on the entropy per baryon ($s/k$), dynamical timescale ($\\tau_{dyn}$), and electron fraction ($Y_{e}$) consistent with heavy element nucleosynthesis in the r-process. We show that the previously neglected reaction flow throu gh the reaction sequence \\atg (n,$\\gamma$)\\Li~ significantly enhances the production of seed nuclei. We analyze the r-process nucleosynthesis in the context of a schematic exponential wi nd model. We show that fewer neutrons per seed nucleus implies that the entropy per baryon required for successful r-process nucleosynthesis must be more than a factor of two higher than previous estimates. This places new constraints on dynamical mo dels for the r-process.

  18. Columbia Water & Light- Solar Rebates

    Broader source: Energy.gov [DOE]

    Columbia Water & Light electric customers are eligible for a $400 rebate for the purchase of a new solar water heater. To apply for this rebate, a customer submits a pre-approval application to...

  19. C02 Huff-n-Puff Process in a Light Oil Shallow Shelf Carbonate Reservoir

    SciTech Connect (OSTI)

    Mark Kovar; Scott Wehner

    1998-01-31

    The principal objective of this CO2 Huf-n-Puff (H-n-P) project is to determine the feasibility and practicality of the technology in a waterflooded shallow shelf carbonate environment. The results of parametric simulation of the CO2 H-n-P process, coupled with reservoir characterization components are to be used to determine if this process is technically and economically feasible for field implementation. The technology transfer objective of the project is to disseminate the knowledge gained through an innovative plan of increasing oil production and deferring abandonment of shallow shelf carbonate reservoirs.

  20. Studies of solution-processed organic light-emitting diodes and their materials

    SciTech Connect (OSTI)

    Hellerich, Emily

    2013-05-15

    A hitherto unexplored approach is presented in which a small molecule is used as a host to polymer guests in solution-processed OLEDs. We find that the small molecule host results in much more efficient devices than the often-used alternative polymer host when used for the guests presented. It is likely that nano- and microstructural differences between the hosts contribute to the improvements, which highlights some interesting characteristics that can help to better understand the nature of these mixtures. A number of the guests used in this study were newly synthesized benzobisoxazole-based copolymers. New organic copolymers are presented that are based on the chemical structure of benzobisoxazoles, which have been shown in the past to have good electron transporting properties. The novel concept in this publication pertains to a change in the direction of polymerization, also known as the conjugation pathway, which we show increases the emission efficiency. This work highlights a unique and useful property of organic semiconducting materials in that they can be synthesized to create the desired characteristics. Earlier work is described that kick-started in our research group the use of small molecules in solution-processed OLEDs. Originally these devices were to be used in magnetoresistance studies, but the project took a different path when the devices were more efficient than expected. The efficient use of small molecules in solution-processed OLEDs is highlighted, which at the time was not often the case. Also, the important observation of the effect of solvent choice on the resultant film is emphasized, with discussion of the likely cause of these effects. Microcavity OLEDs are introduced in which the transparent anode ITO is replaced with semi-transparent thin silver, which creates an optical cavity within the devices. The goal was to expand a previous work that created an on-chip spectrometer covering wavelengths 493 to 639 nm. In this case, a spin-coated mixed emitting layer (EML) is used, consisting of a polymer and a small molecule that both emit in the near UV and blue. The resulting combined spectra gives a wide band that can be used to create narrow microcavity emission peaks of 373 to 469 nm, depending on the device thickness (i.e. the cavity’s optical length). In the process of this effort, the mixed EML presented interesting complexities that we attempt to explain via simulation and morphology study.

  1. Process for the selective removal of hydrogen sulphide and carbonyl sulfide from light hydrocarbon gases containing carbon dioxide

    SciTech Connect (OSTI)

    Bush, W.V.

    1988-06-07

    A process for the selective removal of H/sub 2/S and COS from a gas containing light hydrocarbons, H/sub 2/S, COS and CO/sub 2/, is described which comprises in a one step absorption, at treatment conditions, contacting the gas stream with a solvent stream consisting essentially of: (i) water, (ii) a bridgehead amine comprising a bicyclo tertiary amine or a bicyclo amidine to selectively hydrolyze the COS to H/sub 2/S and CO/sub 2/, (iii) a tertiary amine to selectively absorb the H/sub 2/S and to selectively exclude from absorption the CO/sub 2/ in the gas stream and the CO/sub 2/ produced by the hydrolysis of the COS, and (iv) a physical solvent acceptable for COS absorption wherein two streams are formed comprising: (1) a light hydrocarbon and CO/sub 2/-containing stream having 1 ppm to about 200 ppm H/sub 2/S and having 1 ppm COS to about 10 ppm COS and (2) a solvent stream rich in H/sub 2/S, water, tertiary amine and the bridgehead amine.

  2. Continuous-variable quantum information processing with squeezed states of light

    E-Print Network [OSTI]

    Hidehiro Yonezawa; Akira Furusawa

    2008-11-11

    We investigate experiments of continuous-variable quantum information processing based on the teleportation scheme. Quantum teleportation, which is realized by a two-mode squeezed vacuum state and measurement-and-feedforward, is considered as an elementary quantum circuit as well as quantum communication. By modifying ancilla states or measurement-and-feedforwards, we can realize various quantum circuits which suffice for universal quantum computation. In order to realize the teleportation-based computation we improve the level of squeezing, and fidelity of teleportation. With a high-fidelity teleporter we demonstrate some advanced teleportation experiments, i.e., teleportation of a squeezed state and sequential teleportation of a coherent state. Moreover, as an example of the teleportation-based computation, we build a QND interaction gate which is a continuous-variable analog of a CNOT gate. A QND interaction gate is constructed only with ancillary squeezed vacuum states and measurement-and-feedforwards. We also create continuous-variable four mode cluster type entanglement for further application, namely, one-way quantum computation.

  3. Dayton Power and Light - Business and Government Energy Efficiency...

    Broader source: Energy.gov (indexed) [DOE]

    approval Other EE Program Info Sector Name Utility Administrator Dayton Power and Light Website http:www.dpandl.comsave-moneybusiness-government State Ohio Program Type...

  4. Materials processing with light

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    necessary to incorporate lasers into production for use in cutting, drilling, welding and engraving is available at the ARC. New very high-power, tunable lamp-based...

  5. Assessing willingness to test for HIV among men who have sex with men using conjoint analysis, evidence for uptake of the FDA-approved at-home HIV test

    E-Print Network [OSTI]

    Lee, SJ; Brooks, R; Bolan, RK; Flynn, R

    2013-01-01

    are significant in light of the new at- home HIV test kitamong MSM. In light of the recently FDA-approved at-home HIV

  6. Shedding new Light on Fog Physical Processes By m. Haeffelin, t. Bergot, t. elias, r. tardif, d. Carrer, p. CHaZette, m. ColomB,

    E-Print Network [OSTI]

    PARISFOG Shedding new Light on Fog Physical Processes By m. Haeffelin, t. Bergot, t. elias, rCiare, and X. ZHang A field experiment covering more than 100 fog and near-fog situations during the winter of fog. L ow-visibility meteorological conditions, such as fog, are not necessarily considered extreme

  7. PHYSICAL PROCESSES SHAPING GAMMA-RAY BURST X-RAY AFTERGLOW LIGHT CURVES: THEORETICAL IMPLICATIONS FROM THE SWIFT X-RAY TELESCOPE OBSERVATIONS

    E-Print Network [OSTI]

    Zhang, Bing

    PHYSICAL PROCESSES SHAPING GAMMA-RAY BURST X-RAY AFTERGLOW LIGHT CURVES: THEORETICAL IMPLICATIONS August 15; accepted 2005 December 19 ABSTRACT With the successful launch of the Swift Gamma-Ray Burst component is consistent with the tail emission of the prompt gamma-ray bursts and/or the X-ray flares

  8. Actuals Journal Approval Tip NUFinancials

    E-Print Network [OSTI]

    Shull, Kenneth R.

    Actuals Journal Approval Tip NUFinancials Workflow and Approvals FMS804 02/20/2009-vlr FMS804 Actuals Journal Approval Tip © 2009 Northwestern University FMS804 ­ Job Aid Page 1 of 1 This job aid describes what an Actuals Journal should look like to an Approver. Explanation: Whenever an Actuals journal

  9. Assessment of the Mechanical Stress Improvement Process for Mitigating Primary Water Stress Corrosion Cracking in Nickel Alloy Butt Welds in Piping Systems Approved for Leak-Before-Break

    SciTech Connect (OSTI)

    Sullivan, Edmund J.; Anderson, Michael T.

    2013-01-01

    This report provides an assessment of the use of Mechanical Stress Improvement Process to reduce, or decrease, stress-driven degradation, i.e., primary water stress corrosion cracking.

  10. Real Estate Approvals | Department of Energy

    Energy Savers [EERE]

    Real Estate Approvals Real Estate Approvals Real Estate Approvals Policy Flash 2011-61, Acquisition Guide Chapter 17.3, Acquisition, Use, and Disposal of Real Estate (attachment)...

  11. PHYSICAL REVIEW C 78, 024603 (2008) Competition of coalescence and "fireball" processes in nonequilibrium emission of light charged

    E-Print Network [OSTI]

    Magiera, Andrzej

    2008-01-01

    . The intermediate mass fragment spectra and their angular distributions are very well reproduced of the double differential cross sections d2 /d dE for light charged particles (LCPs) and intermediate mass on the target drills a cylindrical hole in the nucleus, which results in the presence of three sources emitting

  12. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal FacilityApplicantOfficePlasmaApprovedApproved

  13. Electronic Compliance and Approval Project (ECAP)

    SciTech Connect (OSTI)

    Morgan, Hope; Varela, Richard A.; LaHood, Deborah; Cisco, Susan; Benavides, Mary Ann; Burks, Donna

    2002-03-20

    The Texas Railroad Commission (RRC), working in partnership with the United States Department of Energy and the oil and gas industry it regulates, implemented a strategy for improving efficiency in regulations and significantly reducing administrative operating costs through the Electronic Compliance and Approval Process (ECAP). This project streamlined regulatory compliance and reporting by providing the ability to electronically submit, process, and query oil and gas applications and reports through the Internet-based ECAP system.

  14. Simulation of the vacuum assisted resin transfer molding (VARTM) process and the development of light-weight composite bridging

    E-Print Network [OSTI]

    Robinson, Marc J.

    2008-01-01

    Assisted Resin Transfer Molding (VARTM). Polymer CompositesAssisted Resin Transfer Molding (VARTM): Model Verification.in the Reaction Injection Molding Process. AICheE Journal

  15. University Policy Process Short Version

    E-Print Network [OSTI]

    Rev. 5/09 University Policy Process Short Version Conduct Analysis Draft Documents Get Approvals. Identify policy owner 3. Assemble team 4. Engage Stakeholders 5. Draft policy 6. Submit proposed policy approves (or not) Do we need a policy? 11. Plan communication & training 12. UPO posts approved policy

  16. Light-Light Scattering

    E-Print Network [OSTI]

    Naohiro Kanda

    2011-06-03

    For a long time, it is believed that the light by light scattering is described properly by the Lagrangian density obtained by Heisenberg and Euler. Here, we present a new calculation which is based on the modern field theory technique. It is found that the light-light scattering is completely different from the old expression. The reason is basically due to the unphysical condition (gauge condition) which was employed by the QED calcualtion of Karplus and Neumann. The correct cross section of light-light scattering at low energy of $(\\frac{\\omega}{m} \\ll 1)$ can be written as $ \\displaystyle{\\frac{d\\sigma}{d\\Omega}=\\frac{1}{(6\\pi)^2}\\frac{\\alpha^4} {(2\\omega)^2}(3+2\\cos^2\\theta +\\cos^4\\theta)}$.

  17. Light and Plants Plants use light to photosynthesize. Name two places that light can come from

    E-Print Network [OSTI]

    Koptur, Suzanne

    Light and Plants Plants use light to photosynthesize. Name two places that light can come from: 1 (CO2, a gas) from the air and turn it into SUGARS (food). This process is powered by energy from light plants) for energy. Photosynthetically Active Radiation (PAR) is a combination of red light and blue

  18. NMED Approves Transuranic Waste Storage Extension

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on771/6/14 Contact: Janet Lambert4NIEHS7, 2015 NMED Approves

  19. Development of Novel RTP-like Processing for Solar Cell Fabrication using UV-Rich Light Sources: Cooperative Research and Development Final Report, CRADA No. CRD-11-442

    SciTech Connect (OSTI)

    Sopori, B.

    2013-01-01

    NREL and Mattson Technology are interested in developing new processing techniques for fabrication of solar cells using UV-rich optical processing. UV light has a very high absorption coefficient in most semiconductors, allowing the semiconductor surface to be heated locally and, in some cases, without a significant increase in the substrate temperature. NREL has several projects related to cell processing that currently use an optical furnace (having a spectrum rich in visible and infrared light). Mattson Technology has developed a UV rich light source that can be used in either pulse or continuous modes. The objective of this CRADA is to explore applications in solar cell processing where absorption characteristics of UV light can lead to lower cell cost and/or higher efficiencies.

  20. Y-12 electromagnetic separation process wins approval

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLos Alamos verifies largest single and theelectromagnetic separation

  1. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal FacilityApplicantOfficePlasmaApproved Program

  2. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal FacilityApplicantOfficePlasmaApproved

  3. Approved Ballots - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room News Publications TraditionalWithAntiferromagnetic Spins DoApply for YourFrontiers inApproved

  4. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room News Publications TraditionalWithAntiferromagnetic Spins DoApply for YourFrontiersApproved

  5. Characterization of light gluten and light steep water from a corn wet milling plant

    E-Print Network [OSTI]

    Characterization of light gluten and light steep water from a corn wet milling plant K.D. Rausch. There are few data on the effect of composition of the parent process streams, light steep water (LSW) and light value of CGF and CGM. CGF and CGM are formed from two process streams, light steep water (LSW) and light

  6. CO2 Huff-n-Puff process in a light oil shallow shelf carbonate reservoir. Annual report, January 1, 1995--December 31, 1995

    SciTech Connect (OSTI)

    Wehner, S.C.; Boomer, R.J.; Cole, R.; Preiditus, J.; Vogt, J.

    1996-09-01

    The application of cyclic CO{sub 2}, often referred to as the CO{sub 2} Huff-n-Puff process, may find its niche in the maturing waterfloods of the Permian Basin. Coupling the CO{sub 2} H-n-P process to miscible flooding applications could provide the needed revenue to sufficiently mitigate near-term negative cash flow concerns in the capital intensive miscible projects. Texaco Exploration & Production Inc. and the U.S. Department of Energy have teamed up in an attempt to develop the CO{sub 2} Huff-n-Puff process in the Grayburg/San Andres formation; a light oil, shallow shelf carbonate reservoir within the Permian Basin. This cost-shared effort is intended to demonstrate the viability of this underutilized technology in a specific class of domestic reservoir. A significant amount of oil reserves are located in carbonate reservoirs. Specifically, the carbonates deposited in shallow shelf (SSC) environments make up the largest percentage of known reservoirs within the Permian Basin of North America. Many of these known resources have been under waterflooding operations for decades and are at risk of abandonment if crude oil recoveries cannot be economically enhanced. The selected site for this demonstration project is the Central Vacuum Unit waterflood in Lea County, New Mexico.

  7. Internal Supplemental Compensation Approval Form

    E-Print Network [OSTI]

    Clark, Bunny

    Internal Supplemental Compensation Approval Form The Ohio State University Page 1 of 1 Internal Supplemental Compensation Approval Form UMC10036­Revised 02/10 The salary of regular, full-time faculty, the individual may be eligible to receive supplemental compensation if release time is not a feasible option

  8. Smart Lighting Controller!! Smart lighting!

    E-Print Network [OSTI]

    Anderson, Betty Lise

    'll build the circuit! We'll use an LED to represent the room lights! #12;4! Block diagram! Battery! Rail! #12;23! LED: light-emitting diode! Diode conducts current in only one direction! When current flows1! Smart Lighting Controller!! #12;2! Smart lighting! No need to spend energy lighting the room if

  9. Strategic Plan | 2008-2013 Approved unanimously by

    E-Print Network [OSTI]

    Lee, Dongwon

    Strategic Plan | 2008-2013 Approved unanimously by the Executive Board of the Penn State Alumni Association on April 17, 2008 #12;Penn State Alumni Association 1 2008-2013 Strategic Plan FOREWORD For 138 and a strategic-planning process that is now a quarter century old, the first such plan being forged in 1983

  10. Modifying the organic/electrode interface in Organic Solar Cells (OSCs) and improving the efficiency of solution-processed phosphorescent Organic Light-Emitting Diodes (OLEDs)

    SciTech Connect (OSTI)

    Xiao, Teng

    2012-04-27

    Organic semiconductors devices, such as, organic solar cells (OSCs), organic light-emitting diodes (OLEDs) and organic field-effect transistors (OFETs) have drawn increasing interest in recent decades. As organic materials are flexible, light weight, and potentially low-cost, organic semiconductor devices are considered to be an alternative to their inorganic counterparts. This dissertation will focus mainly on OSCs and OLEDs. As a clean and renewable energy source, the development of OSCs is very promising. Cells with 9.2% power conversion efficiency (PCE) were reported this year, compared to < 8% two years ago. OSCs belong to the so-called third generation solar cells and are still under development. While OLEDs are a more mature and better studied field, with commercial products already launched in the market, there are still several key issues: (1) the cost of OSCs/OLEDs is still high, largely due to the costly manufacturing processes; (2) the efficiency of OSCs/OLEDs needs to be improved; (3) the lifetime of OSCs/OLEDs is not sufficient compared to their inorganic counterparts; (4) the physics models of the behavior of the devices are not satisfactory. All these limitations invoke the demand for new organic materials, improved device architectures, low-cost fabrication methods, and better understanding of device physics. For OSCs, we attempted to improve the PCE by modifying the interlayer between active layer/metal. We found that ethylene glycol (EG) treated poly(3,4-ethylenedioxythiophene): polystyrenesulfonate (PEDOT: PSS) improves hole collection at the metal/polymer interface, furthermore it also affects the growth of the poly(3- hexylthiophene) (P3HT):phenyl-C61-butyric acid methyl ester (PCBM) blends, making the phase segregation more favorable for charge collection. We then studied organic/inorganic tandem cells. We also investigated the effect of a thin LiF layer on the hole-collection of copper phthalocyanine (CuPc)/C70-based small molecular OSCs. A thin LiF layer serves typically as the electron injection layer in OLEDs and electron collection interlayer in the OSCs. However, several reports showed that it can also assist in holeinjection in OLEDs. Here we first demonstrate that it assists hole-collection in OSCs, which is more obvious after air-plasma treatment, and explore this intriguing dual role. For OLEDs, we focus on solution processing methods to fabricate highly efficient phosphorescent OLEDs. First, we investigated OLEDs with a polymer host matrix, and enhanced charge injection by adding hole- and electron-transport materials into the system. We also applied a hole-blocking and electron-transport material to prevent luminescence quenching by the cathode. Finally, we substituted the polymer host by a small molecule, to achieve more efficient solution processed small molecular OLEDs (SMOLEDs); this approach is cost-effective in comparison to the more common vacuum thermal evaporation. All these studies help us to better understand the underlying relationship between the organic semiconductor materials and the OSCs and OLEDs’ performance and will subsequently assist in further enhancing the efficiencies of OSCs and OLEDs. With better efficiency and longer lifetime, the OSCs and OLEDs will be competitive with their inorganic counterparts.

  11. Light Properties Light travels at the speed of light `c'

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    LIGHT!! #12;Light Properties Light travels at the speed of light `c' C = 3 x 108 m/s Or 190,000 miles/second!! Light could travel around the world about 8 times in one second #12;What is light?? Light is a "wave packet" A photon is a "light particle" #12;Electromagnetic Radiation and You Light is sometimes

  12. Honors Thesis Approval Form Use this Honors Thesis Approval Form when preparing your Honors thesis for final departmental approval.

    E-Print Network [OSTI]

    Tholl, Dorothea

    Honors Thesis Approval Form Use this Honors Thesis Approval Form when preparing your Honors thesis with the final copy of your thesis to University Honors by the designated deadline. NOTE: Some departments have their own thesis approval form. Please check with the Honors Advisor in your department to determine if you

  13. Approved March 15, 2010 UNIVERSITY GRADUATE COUNCIL

    E-Print Network [OSTI]

    of Arts degree in Higher, Adult and Lifelong Education - . approved 10. Request to change the requirements the requirements for the Master of Science in Nursing degree in Nursing - . approved 13. Request to establish

  14. Instruction Guide Temporary Substitution for Approvers

    E-Print Network [OSTI]

    Sin, Peter

    of 2 5. Search for the name of the temporary approver (enter the name or the first letter of the last. If a long term substitution needs to take place (more than two weeks) then a new Approver should

  15. Low-Cost Nano-Patterning Process Makes Millions of Holes in Silver Film, Boosting Light-Capturing Qualities of Solar Cells (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-02-01

    NREL researchers have demonstrated a simple, low-cost way to pattern nano-sized holes in thin silver films in order to trap light waves and boost the transmission of photons into usable energy.

  16. APPROVED MATERIALS FOR ALSEP EQUIPMENT

    E-Print Network [OSTI]

    Rathbun, Julie A.

    expanding Section I and Section II and adding Section III. New materials added in this revision are: 211 212#12;#12;: : . APPROVED MATERIALS FOR ALSEP EQUIPMENT NO. REV. NO. ATM 242 E PAGE COVER OF 54 DATE 213 322 323 324 417 418 419 612 613 806 1111 Materials reinstated (clarified type no.): 1009 Prepared

  17. Cerenkov Light

    ScienceCinema (OSTI)

    Slifer, Karl

    2014-05-22

    The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

  18. Cerenkov Light

    SciTech Connect (OSTI)

    Slifer, Karl

    2013-06-13

    The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

  19. Lighting Renovations

    Broader source: Energy.gov [DOE]

    When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide...

  20. REVIEW OF NRC APPROVED DIGITAL CONTROL SYSTEMS ANALYSIS

    SciTech Connect (OSTI)

    D.W. Markman

    1999-09-17

    Preliminary design concepts for the proposed Subsurface Repository at Yucca Mountain indicate extensive reliance on modern, computer-based, digital control technologies. The purpose of this analysis is to investigate the degree to which the U. S. Nuclear Regulatory Commission (NRC) has accepted and approved the use of digital control technology for safety-related applications within the nuclear power industry. This analysis reviews cases of existing digitally-based control systems that have been approved by the NRC. These cases can serve as precedence for using similar types of digitally-based control technologies within the Subsurface Repository. While it is anticipated that the Yucca Mountain Project (YMP) will not contain control systems as complex as those required for a nuclear power plant, the review of these existing NRC approved applications will provide the YMP with valuable insight into the NRCs review process and design expectations for safety-related digital control systems. According to the YMP Compliance Program Guidance, portions of various NUREGS, Regulatory Guidelines, and nuclear IEEE standards the nuclear power plant safety related concept would be applied to some of the designs on a case-by-case basis. This analysis will consider key design methods, capabilities, successes, and important limitations or problems of selected control systems that have been approved for use in the Nuclear Power industry. An additional purpose of this analysis is to provide background information in support of further development of design criteria for the YMP. The scope and primary objectives of this analysis are to: (1) Identify and research the extent and precedence of digital control and remotely operated systems approved by the NRC for the nuclear power industry. Help provide a basis for using and relying on digital technologies for nuclear related safety critical applications. (2) Identify the basic control architecture and methods of key digital control systems approved for use in the nuclear power industry by the NRC. (3) Identify and discuss key design issues, features, benefits, and limitations of these NRC approved digital control systems that can be applied as design guidance and correlated to the Monitored Geologic Repository (MGR) design requirements. (4) Identify codes and standards used in the design of these NRC approved digital control systems and discuss their possible applicability to the design of a subsurface nuclear waste repository. (5) Evaluate the NRC approved digital control system's safety, reliability and maintainability features and issues. Apply these to MGR design methodologies and requirements. (6) Provide recommendations for use in developing design criteria in the System Description Documents for the digital control systems of the subsurface nuclear waste repository at Yucca Mountain. (7) Develop recommendations for applying NRC approval methods for digital control systems for the subsurface nuclear waste repository at Yucca Mountain. This analysis will focus on the development of the issues, criteria and methods used and required for identifying the appropriate requirements for digital based control systems. Attention will be placed on development of recommended design criteria for digital controls including interpretation of codes, standards and regulations. Attention will also focus on the use of digital controls and COTS (Commercial Off-the-shelf) technology and equipment in selected NRC approved digital control systems, and as referenced in applicable codes, standards and regulations. The analysis will address design issues related to COTS technology and how they were dealt with in previous NRC approved digital control systems.

  1. Lighting in the Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by your library lights E Kilowatt-hours consumed by your library lights F Annual cost of operating your library lights H Current lighting index for your library ...

  2. Light's Darkness

    ScienceCinema (OSTI)

    Padgett, Miles [University of Glasgow, Glasgow, Scotland

    2010-01-08

    Optical vortices and orbital angular momentum are currently topical subjects in the optics literature. Although seemingly esoteric, they are, in fact, the generic state of light and arise whenever three or more plane waves interfere. To be observed by eye the light must be monochromatic. Laser speckle is one such example, where the optical energy circulates around each black spot, giving a local orbital angular momentum. This talk with report three on-going studies. First, when considering a volume of interfering waves, the laser specs map out threads of complete darkness embedded in the light. Do these threads form loops? Links? Or even knots? Second, when looking through a rapidly spinning window, the image of the world on the other side is rotated: true or false? Finally, the entanglement of orbital angular momentum states means measuring how the angular position of one photons sets the angular momentum of another: is this an angular version of the EPR (Einstein, Podolsky, and Rosen) paradox?

  3. Types of Lights Types of Lights

    E-Print Network [OSTI]

    1 Types of Lights Types of Lights q So far we have studied point lights ­ Radiate in all direc7ons q Other lights ­ Direc7onal lights (posi7on-independent) ­ Spotlights #12;2 Direc1onal Lights q Shine in a single, uniform direc7on q All rays

  4. Material slow light and structural slow light: similarities and differences for nonlinear optics [Invited

    E-Print Network [OSTI]

    Boyd, Robert W.

    Material slow light and structural slow light: similarities and differences for nonlinear optics There are two standard methods for controlling the group velocity of light. One makes use of the dispersive nonlinear optical processes are enhanced through use of slow-light interactions and when they are not

  5. Approved November 16, 2010 SCHOOL OF MANAGEMENT

    E-Print Network [OSTI]

    Pittendrigh, Barry

    Approved November 16, 2010 SCHOOL OF MANAGEMENT KRANNERT GRADUATE SCHOOL OF MANAGEMENT PURDUE;Approved November 16, 2010 Vision: The Krannert School of Management will focus on the management at Krannert in many different ways - Innovation in the classroom ­ through state of the art cases, theory

  6. Light Computing

    E-Print Network [OSTI]

    Gordon Chalmers

    2006-10-13

    A configuration of light pulses is generated, together with emitters and receptors, that allows computing. The computing is extraordinarily high in number of flops per second, exceeding the capability of a quantum computer for a given size and coherence region. The emitters and receptors are based on the quantum diode, which can emit and detect individual photons with high accuracy.

  7. Meso-porous ?-Fe{sub 2}O{sub 3} thin films synthesized via the sol-gel process for light-driven water oxidation

    SciTech Connect (OSTI)

    Hamd, Wael; Laberty-Robert, Christel; Sanchez, Clement [Laboratoire de Chimie de la Matiere Condensee de Paris-UMR 7574, Universite Paris 6, College de France, 11 place Marcelin Berthelot 75005, Paris, (France); Cobo, Saioa; Fize, Jennifer; Artero, Vincent [Laboratoire de Chimie et Biologie des Metaux, Universite Grenoble 1, CNRS, CEA, 17 rue des Martyrs 38054, Grenoble Cedex 9, (France); Baldinozzi, Gianguido [SPMS, MFE, CNRS-Ecole Centrale Paris et CEA, DEN, DMN, 91191 Gif-sur-Yvette, (France); Schwartz, Wilfrid; Reymermier, Maryse; Pereira, Alexandre [CEA Institut Liten, DTNM/L2CE, 17 rue des Martyrs 38054, Grenoble Cedex 9, (France); Fontecave, Marc [Laboratoire de Chimie et Biologie des Metaux, Universite Grenoble 1, CNRS, CEA, 17 rue des Martyrs 38054, Grenoble Cedex 9, (France); SPMS, MFE, CNRS-Ecole Centrale Paris et CEA, DEN, DMN, 91191 Gif-sur-Yvette, (France)

    2012-07-01

    This work reports a facile and cost-effective method for synthesizing photoactive ?-Fe{sub 2}O{sub 3} films as well as their performances when used as photoanodes for water oxidation. Transparent ?-Fe{sub 2}O{sub 3} meso-porous films were fabricated by template-directed sol-gel chemistry coupled with the dip-coating approach, followed by annealing at various temperatures from 350 degrees C to 750 degrees C in air. ?-Fe{sub 2}O{sub 3} films were characterized by X-ray diffraction, XPS, FE-SEM and electrochemical measurements. The photoelectrochemical performance of ?-Fe{sub 2}O{sub 3} photoanodes was characterized and optimized through the deposition of Co-based co-catalysts via different methods (impregnation, electro-deposition and photo-electro-deposition). Interestingly, the resulting hematite films heat-treated at relatively low temperature (500 degrees C), and therefore devoid of any extrinsic dopant, achieve light-driven water oxidation under near-to-neutral (pH = 8) aqueous conditions after decoration with a Co catalyst. The onset potential is 0.75 V vs. the reversible hydrogen electrode (RHE), thus corresponding to 450 mV light-induced under potential, although modest photocurrent density values (40 ?Acm{sup -2}) are obtained below 1.23 V vs. RHE. These new materials with a very large interfacial area in contact with the electrolyte and allowing for a high loading of water oxidation catalysts open new avenues for the optimization of photo-electrochemical water splitting. (authors)

  8. SEP Request for Approval Form 7 - Other Situations for Consumption...

    Broader source: Energy.gov (indexed) [DOE]

    7Other-Situations-for-Consumption-Adjustment.docx More Documents & Publications SEP Request for Approval Form 6 - Non-Routine Adjustments SEP Request for Approval Form 5 - Model...

  9. DOE Approves Field Test for Promising Carbon Capture Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Approves Field Test for Promising Carbon Capture Technology DOE Approves Field Test for Promising Carbon Capture Technology November 20, 2012 - 12:00pm Addthis Washington, DC -...

  10. Global Nuclear Energy Partnership Steering Group Members Approve...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Steering Group Members Approve Transformation to the International Framework for Nuclear Energy Cooperation Global Nuclear Energy Partnership Steering Group Members Approve...

  11. Pupillary efficient lighting system

    DOE Patents [OSTI]

    Berman, Samuel M. (San Francisco, CA); Jewett, Don L. (Mill Valley, CA)

    1991-01-01

    A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination.

  12. The journey of light : a rehabilitation center of inhabited light, NYC

    E-Print Network [OSTI]

    Louie, John Lai Yen

    1991-01-01

    The primary intention of this thesis is to explore the tectonic qualities of light throughCthe design of a building. In addition to addressing some of the more general questions concerning light raised in the design process, ...

  13. Creating effective computer generated scene lighting using traditional film lighting techniques 

    E-Print Network [OSTI]

    Garcia, Julie Marie

    2006-04-12

    This thesis explores the process of translating traditional cinematic lighting into the digital realm by understanding distinctly different lighting styles of three Directors of Photography. These Directors of Photography are Conrad Hall, Gregg...

  14. ASUU Finance Guidelines for the Budget Process, Assembly, and Senate SPECIFIC ITEMS MAY BE FUNDED ONLY ONCE, THROUGH ONE BODY.

    E-Print Network [OSTI]

    Tipple, Brett

    ASUU Finance Guidelines for the Budget Process, Assembly, and Senate-approved by the Director of Finance in accordance with the ASUU Financial Policies and Procedures to $300 maximum per year Prior approval must be given by the Finance Board

  15. University of Washington Bothell Food and Beverage Internal Approval

    E-Print Network [OSTI]

    Matrajt, Graciela

    University of Washington Bothell Food and Beverage Internal Approval PLEASE OBTAIN PRIOR APPROVAL FROM BUDGET AND PLANNING "Food approval code definitions are described at http://www.washington.washington.edu/fm/food-approval (this section is mandatory, if not filled out properly it could delay

  16. Radioluminescent lighting technology

    SciTech Connect (OSTI)

    Not Available

    1990-01-01

    The glow-in-the-dark stereotype that characterizes the popular image of nuclear materials is not accidental. When the French scientist, Henri Becquerel, first discovered radioactivity in 1896, he was interested in luminescence. Radioluminescence, the production of light from a mixture of energetic and passive materials, is probably the oldest practical application of the unstable nucleus. Tritium-based radioluminescent lighting, in spite of the biologically favorable character of the gaseous tritium isotope, was included in the general tightening of environmental and safety regulations. Tritium light manufacturers would have to meet two fundamental conditions: (1) The benefit clearly outweighed the risk, to the extent that even the perceived risk of a skeptical public would be overcome. (2) The need was significant enough that the customer/user would be willing and able to afford the cost of regulation that was imposed both in the manufacture, use and eventual disposal of nuclear materials. In 1981, researchers at Oak Ridge National Laboratory were investigating larger radioluminescent applications using byproduct nuclear material such as krypton-85, as well as tritium. By 1982, it appeared that large source, (100 Curies or more) tritium gas tube, lights might be useful for marking runways and drop zones for military operations and perhaps even special civilian aviation applications. The successful development of this idea depended on making the light bright enough and demonstrating that large gas tube sources could be used and maintained safely in the environment. This successful DOE program is now in the process of being completed and closed-out. Working closely with the tritium light industry, State governments and other Federal agencies, the basic program goals have been achieved. This is a detailed report of what they have learned, proven, and discovered. 91 refs., 29 figs., 5 tabs. (JF)

  17. Residential Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMassR&D100Nationalquestionnaires 0 Averagequestionnaires 7tniLighting Sign In

  18. LED Lighting Basics

    Broader source: Energy.gov [DOE]

    Light-Emitting diodes (LEDs) efficiently produce light in a fundamentally different way than any legacy or traditional source of light.

  19. Experiential Component Approval Form Concentration in Nanotechnology

    E-Print Network [OSTI]

    Experiential Component Approval Form Concentration in Nanotechnology Return completed form to ENG Plan to complete the experiential component as a requirement for the concentration in Nanotechnology to complete the experiential component for the Nanotechnology Concentration by: Research Experience in Lab

  20. Sandia Energy - (Lighting and) Solid-State Lighting: Science...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Lighting and) Solid-State Lighting: Science, Technology, Economic Perspectives Home Energy Research EFRCs Solid-State Lighting Science EFRC (Lighting and) Solid-State Lighting:...

  1. Sustainable Office Lighting Options

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Sustainable Office Lighting Options Task Lighting: Task lighting is a localized method of lighting a workspace so that additional, unnecessary lighting is eliminated, decreasing energy usage and costs. Illumination levels in the targeted work areas are higher with task lighting than with the ambient levels

  2. POLICY GUIDANCE MEMORANDUM #11A Approval Process for Dual Compensation

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy AEnergy Managing853926Families | DepartmentEnergy

  3. Web Project Process and Approvals | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing ToolInternationalReport FY2014 - Employers139 Weatherization Works II -Energy|Web

  4. Communications Product Review Process and Approvals | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p aDepartment ofCommercial Grade DedicationaOffice of

  5. ISA Approves Standard for Wireless Automation in Process Control Applications

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancingR Walls21, 2012INSPECTION REPORT:

  6. ISA Approves Standard for Wireless Automation in Process Control

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergy HeadquartersFuelB IMSofNewsletterGuidingUpdateofMarchOffshoreIRP Budget Spreadsheet

  7. Directed light fabrication

    SciTech Connect (OSTI)

    Lewis, G.K.; Nemec, R.; Milewski, J.; Thoma, D.J.; Cremers, D.; Barbe, M.

    1994-09-01

    Directed Light Fabrication (DLF) is a rapid prototyping process being developed at Los Alamos National Laboratory to fabricate metal components. This is done by fusing gas delivered metal powder particles in the focal zone of a laser beam that is, programmed to move along or across the part cross section. Fully dense metal is built up a layer at a time to form the desired part represented by a 3 dimensional solid model from CAD software. Machine ``tool paths`` are created from the solid model that command the movement and processing parameters specific to the DLF process so that the part can be built one layer at a time. The result is a fully dense, near net shape metal part that solidifies under rapid solidification conditions.

  8. Approved by University Council, November 2008 Approved by the Board of Governors, December 2008

    E-Print Network [OSTI]

    Saskatchewan, University of

    Approved by University Council, November 2008 Approved by the Board of Governors, December 2008 of everyone and every activity. The Strategic Directions Quality is an abiding interest of universities academic programs, evidenced through the adoption in 1999 of Systematic Program Review (SPR

  9. Review and Approval of Nuclear Facility Safety Basis and Safety Design Basis Documents

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-12-19

    This Standard describes a framework and the criteria to be used for approval of (1) safety basis documents, as required by 10 Code of Federal Regulation (C.F.R.) 830, Nuclear Safety Management, and (2) safety design basis documents, as required by Department of Energy (DOE) Standard (STD)-1189-2008, Integration of Safety into the Design Process.

  10. Approved by Planning & Development committee January 24, 2005 Strategic Plan 2005 development

    E-Print Network [OSTI]

    Frantz, Kyle J.

    Approved by Planning & Development committee January 24, 2005 Strategic Plan 2005 development January 24, 2005 0 Strategic Plan 2005-2010 Introduction 1 I. INSTITUTIONAL IDENTITY 1 Mission 1 The strategic planning process 2 Progress since fall 1999 3 Environmental changes: 2000-2010 12 II. GOALS

  11. Restoring Detroit's Street Lighting System

    SciTech Connect (OSTI)

    Kinzey, Bruce R.

    2015-10-21

    The City of Detroit is undertaking a comprehensive restoration of its street lighting system that includes transitioning the existing high-pressure sodium (HPS) sources to light-emitting diode (LED). Detroit’s well-publicized financial troubles over the last several years have added many hurdles and constraints to this process. Strategies to overcome these issues have largely been successful, but have also brought some mixed results. This document provides an objective review of the circumstances surrounding the system restoration, the processes undertaken and decisions made, and the results so far.

  12. Chromatic Light Adaptation Measured using Functional Magnetic Resonance Imaging

    E-Print Network [OSTI]

    Wandell, Brian A.

    Chromatic Light Adaptation Measured using Functional Magnetic Resonance Imaging Alex R. Wade- nisms within cone photoreceptor classes. Key words: fMRI; light adaptation; cones; simulation; V1; Naka regulation is part of a process called light adaptation. Light adaptation is an important computational step

  13. Lighting Options for Homes.

    SciTech Connect (OSTI)

    Baker, W.S.

    1991-04-01

    This report covers many aspects of various lighting options for homes. Types of light sources described include natural light, artificial light, incandescent lamps, fluorescent lamps, and high intensity discharge lamps. A light source selection guide gives the physical characteristics of these, design considerations, and common applications. Color, strategies for efficient lighting, and types of lighting are discussed. There is one section giving tips for various situations in specific rooms. Rooms and types of fixtures are shown on a matrix with watts saved by using the recommended type lighting for that room and room location. A major emphasis of this report is saving energy by utilizing the most suitable, recommended lighting option. (BN)

  14. Light Water Detritiation using the CECE Process

    Broader source: Energy.gov [DOE]

    Presentation from the 35th Tritium Focus Group Meeting held in Princeton, New Jersey on May 05-07, 2015.

  15. Mobile lighting apparatus

    DOE Patents [OSTI]

    Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

    2013-05-14

    A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

  16. UNCW PD FORM 403 APPROVED 06/01/2010

    E-Print Network [OSTI]

    Olszewski Jr., Edward A.

    UNCW PD FORM 403 APPROVED 06/01/2010 UNIVERSITY POLICE DEPARTMENT APPLICATION FOR RIDE ALONG;UNCW PD FORM 403 APPROVED 06/01/2010 Requested Ride Date and Time Signed by me this day of , 20

  17. SEP Request for Approval Form 2 - Other Derived Energy Sources...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 - Other Derived Energy Sources SEP Request for Approval Form 2 - Other Derived Energy Sources SEP-Request-for-Approval-Form-2Other-Derived-Energy-Sources.docx More Documents &...

  18. Practical image based lighting 

    E-Print Network [OSTI]

    Lee, Jaemin

    2003-01-01

    information is lighting. Image based lighting that is developed to recover illumination information of the real world from photographs has recently been popular in computer graphics. In this thesis we present a practical image based lighting method. Our...

  19. Light in the city

    E-Print Network [OSTI]

    Srinivasan, Kavita, 1976-

    2002-01-01

    This thesis focuses on enhancing the awareness of light for the pedestrian,and using light as a way of revealing the structure of the city and its relation to the cosmos. It proposes that aesthetic qualities of light inform ...

  20. Advances in Lighting 

    E-Print Network [OSTI]

    Tumber, A. J.

    1981-01-01

    Increasing electricity costs have made a significant impact on lighting. The Illuminating Engineering society (I.E.S.) and the lighting industry are producing new standards, procedures and products to make lighting more appropriate and energy...

  1. Natural lighting and skylights 

    E-Print Network [OSTI]

    Evans, Benjamin Hampton

    1961-01-01

    There are many physiological and psychological factors which enter into the proper design of space for human occupancy. One of these elements is light. Both natural light and manufactured light are basic tools with which any designer must work...

  2. Specific light in sculpture

    E-Print Network [OSTI]

    Powell, John William

    1989-01-01

    Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

  3. Advanced Demand Responsive Lighting

    E-Print Network [OSTI]

    Advanced Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center demand responsive lighting systems ­ Importance of dimming ­ New wireless controls technologies · Advanced Demand Responsive Lighting (commenced March 2007) #12;Objectives · Provide up-to-date information

  4. Light Duty Combustion Research: Advanced Light-Duty Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments 2009 DOE Hydrogen Program and...

  5. APPROVED MATERIALS LIST FOR ALSEP EQUIPMENT

    E-Print Network [OSTI]

    Rathbun, Julie A.

    APPROVED MATERIALS LIST FOR ALSEP EQUIPMENT Addendum 1 ATU 242 I (E1) I PAGE-~ OF 39 DATE July 15, 1971 1. Amendment 1 to ATM 242 is issued to incorporate additional non-metallic materials which can operation and storage period. 2. Show alternate material designation for EPON adhesives made by Hysol after

  6. FRENCH APPROVAL PROCEDURES FOR PYROTECHNICAL AUTOMOTIVE SAFETY

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    equipments such gas generators for airbag modules or seat-belt pretensioners, pyrotechnic relay compositions and/or igniters inside those gas generators fall into that case. The approval procedure, test methods specify that pyrotechnical devices for automotive safety, relay compositions and igniters in such devices

  7. Approval Request- VPP- April 13, 1994

    Broader source: Energy.gov [DOE]

    The Office of Safety and Quality Assurance (EH-30) is requesting approval for DOE membership in the VPPPA. Attached is the Secretary's authorization of the DOE Voluntary Protection Program (DOE-VPP). The DOE-VPP is designed to formally recognize those contractors which have demonstrated excellence in their health and safety programs.

  8. 2015 Approved Vehicles CLASS MAKE/MODEL

    E-Print Network [OSTI]

    Hill, Jeffrey E.

    2015 Approved Vehicles CLASS MAKE/MODEL ELECTRIC HYBRID FLEXFUEL GAS DIESEL FUEL ECONOMY (Electric) FUEL ECONOMY (GAS) FUEL ECONOMY (E85) FUEL ECONOMY (DIESEL) ENERGY IMPACT SCORE (ELECTRIC) ENERGY IMPACT SCORE (GAS) ENERGY IMPACT SCORE (E85) ENERGY IMPACT SCORE (DIESEL) SMALL CAR Ford Focus Electric

  9. NATIONAL LABORATORY Approved for public release;

    E-Print Network [OSTI]

    Lu, Zhiming

    Los Alamos NATIONAL LABORATORY LA-UR- Approved for public release; distribution is unlimited. Title: Author(s): Submitted to: Form 836 (10/96) Los Alamos National Laboratory, an affirmative action of this contribution, or to allow others to do so, for U.S. Government purposes.Los Alamos National Laboratory requests

  10. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    are also under consideration. Outside the DOE, the Environmental Protection Agency's Green Lights program promotes energy-efficient lighting as a means to reducing...

  11. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Motivation and Computation of Lighting Measures Floorspace by Lighting Equipment Configuration As described in Appendix A, for each building b, the CBECS data set has the total...

  12. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    more comprehensive understanding of commercial lighting and the potential for lighting energy savings. Steps to build on this analysis can be taken in many directions. One...

  13. Leavenworth Tree Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Join HERO for our annual Leavenworth Tree Lighting Ceremony & Shopping SATURDAY DECEMBER 12, 2015 Leavenworth Christmas Lighting Festival Visitors return year after year for some...

  14. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    light by passing electricity through mercury vapor, which causes the fluorescent coating to glow or fluoresce. High-Efficiency Ballast (HEB): A lighting conservation feature...

  15. Exciting White Lighting

    Broader source: Energy.gov [DOE]

    Windows that emit light and are more energy efficient? Universal Display’s PHOLED technology enables windows that have transparent light-emitting diodes in them.

  16. Demonstration Assessment of Light-Emitting Diode (LED) Parking...

    Office of Scientific and Technical Information (OSTI)

    Search Title: Demonstration Assessment of Light-Emitting Diode (LED) Parking Lot Lighting at T.J.Maxx in Manchester, NH Phase I A report describing the process and results of...

  17. Lighting Controls | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Controls Lighting Controls Use lighting controls to automatically turn lights on and off as needed, and save energy. | Photo courtesy of iStockphoto.comMaliketh. Use lighting...

  18. Visual Perception Light and the Visual Apparatus

    E-Print Network [OSTI]

    Mignotte, Max

    #12;293 Vision and Visual Perception Light and the Visual Apparatus The Visible Spectrum The Eye. was in his car when it was hit by a small truck. In the emergency room, he was told that he had a concussion are providing a valuable model for understanding complex neural processing in general. Light and the Visual

  19. Generating polarization controllable FELs at Dalian coherent light source

    E-Print Network [OSTI]

    Zhang, T; Wang, D; Zhao, Z T; Zhang, W Q; Wu, G R; Dai, D X; Yang, X M

    2013-01-01

    The property of the FEL polarization is of great importance to the user community. FEL pulses with ultra-high intensity and flexible polarization control ability will absolutely open up new scientific realms. In this paper, several polarization control approaches are presented to investigate the great potential on Dalian coherent light source, which is a government-approved novel FEL user facility with the capability of wavelength continuously tunable in the EUV regime of 50-150 nm. The numerical simulations show that both circularly polarized FELs with highly modulating frequency and 100 microjoule level pulse energy could be generated at Dalian coherent light source.

  20. Any Light Particle Search II -- Technical Design Report

    E-Print Network [OSTI]

    Robin Bähre; Babette Döbrich; Jan Dreyling-Eschweiler; Samvel Ghazaryan; Reza Hodajerdi; Dieter Horns; Friederike Januschek; Ernst-Axel Knabbe; Axel Lindner; Dieter Notz; Andreas Ringwald; Jan Eike von Seggern; Richard Stromhagen; Dieter Trines; Benno Willke

    2013-08-02

    This document constitutes an excerpt of the Technical Design Report for the second stage of the "Any Light Particle Search" (ALPS-II) at DESY as submitted to the DESY PRC in August 2012 and reviewed in November 2012. ALPS-II is a "Light Shining through a Wall" experiment which searches for photon oscillations into weakly interacting sub-eV particles. These are often predicted by extensions of the Standard Model and motivated by astrophysical phenomena. The first phases of the ALPS-II project were approved by the DESY management on February 21st, 2013.

  1. Pedestrian Friendly Outdoor Lighting

    SciTech Connect (OSTI)

    Miller, N. J.; Koltai, R. N.; McGowan, T. K.

    2013-12-01

    The GATEWAY program followed two pedestrian-scale lighting projects that required multiple mockups – one at Stanford University in California and the other at Chautauqua Institution in upstate New York. The report provides insight into pedestrian lighting criteria, how they differ from street and area lighting criteria, and how solid-state lighting can be better applied in pedestrian applications.

  2. AgBioResearch (Formerly MAES) Guidelines for Approval and Recruiting for Faculty AgBioResearch supports programs that align with our university-wide mission in agricultural

    E-Print Network [OSTI]

    providing, support for a faculty position. Step 1: Before any formal actions are taken, the unit leaderBioResearch and other partners will review the position request and approve or request revisions. All paperwork it goes to central administration for processing. This formalizes our commitment. Step 4: Approval

  3. Solar concentrator with integrated tracking and light delivery system with summation

    DOE Patents [OSTI]

    Maxey, Lonnie Curt

    2015-05-05

    A solar light distribution system includes a solar light concentrator that is affixed externally to a light transfer tube. Solar light waves are processed by the concentrator into a collimated beam of light, which is then transferred through a light receiving port and into the light transfer tube. A reflector redirects the collimated beam of light through the tube to a light distribution port. The interior surface of the light transfer tube is highly reflective so that the light transfers through the tube with minimal losses. An interchangeable luminaire is attached to the light distribution port and provides light inside of a structure. A sun tracking device rotates the concentrator and the light transfer tube to optimize the receiving of solar light by the concentrator throughout the day. The system provides interior lighting that uses only renewable energy sources, and releases no carbon dioxide emissions into the atmosphere.

  4. Solar concentrator with integrated tracking and light delivery system with collimation

    DOE Patents [OSTI]

    Maxey, Lonnie Curt

    2015-06-09

    A solar light distribution system includes a solar light concentrator that is affixed externally to a light transfer tube. Solar light waves are processed by the concentrator into a collimated beam of light, which is then transferred through a light receiving port and into the light transfer tube. A reflector directs the collimated beam of light through the tube to a light distribution port. The interior surface of the light transfer tube is highly reflective so that the light transfers through the tube with minimal losses. An interchangeable luminaire is attached to the light distribution port and distributes light inside of a structure. A sun tracking device rotates the concentrator and the light transfer tube to optimize the receiving of solar light by the concentrator throughout the day. The system provides interior lighting, uses only renewable energy sources, and releases no carbon dioxide emissions into the atmosphere.

  5. Enrichment of light hydrocarbon mixture

    DOE Patents [OSTI]

    Yang, Dali (Los Alamos, NM); Devlin, David (Santa Fe, NM); Barbero, Robert S. (Santa Cruz, NM); Carrera, Martin E. (Naperville, IL); Colling, Craig W. (Warrenville, IL)

    2011-11-29

    Light hydrocarbon enrichment is accomplished using a vertically oriented distillation column having a plurality of vertically oriented, nonselective micro/mesoporous hollow fibers. Vapor having, for example, both propylene and propane is sent upward through the distillation column in between the hollow fibers. Vapor exits neat the top of the column and is condensed to form a liquid phase that is directed back downward through the lumen of the hollow fibers. As vapor continues to ascend and liquid continues to countercurrently descend, the liquid at the bottom of the column becomes enriched in a higher boiling point, light hydrocarbon (propane, for example) and the vapor at the top becomes enriched in a lower boiling point light hydrocarbon (propylene, for example). The hollow fiber becomes wetted with liquid during the process.

  6. Enrichment of light hydrocarbon mixture

    DOE Patents [OSTI]

    Yang; Dali (Los Alamos, NM); Devlin, David (Santa Fe, NM); Barbero, Robert S. (Santa Cruz, NM); Carrera, Martin E. (Naperville, IL); Colling, Craig W. (Warrenville, IL)

    2010-08-10

    Light hydrocarbon enrichment is accomplished using a vertically oriented distillation column having a plurality of vertically oriented, nonselective micro/mesoporous hollow fibers. Vapor having, for example, both propylene and propane is sent upward through the distillation column in between the hollow fibers. Vapor exits neat the top of the column and is condensed to form a liquid phase that is directed back downward through the lumen of the hollow fibers. As vapor continues to ascend and liquid continues to countercurrently descend, the liquid at the bottom of the column becomes enriched in a higher boiling point, light hydrocarbon (propane, for example) and the vapor at the top becomes enriched in a lower boiling point light hydrocarbon (propylene, for example). The hollow fiber becomes wetted with liquid during the process.

  7. Agencies Approve Bacteria TMDL Task Force Recommendations 

    E-Print Network [OSTI]

    Wythe, Kathy

    2007-01-01

    tx H2O | pg. 10 In June 2007 the Texas Commission onEnvironmental Quality (TCEQ) and the TexasState Soil and Water Conservation Board (TSSW- CB) approved the recommendations of the Bacteria Total Maximum Daily Load (TMDL) Task Force and asked... their agencies to update their TMDL guidance documents to reflect these recommendations. They also authorized establishing a multi-agency bacteria TMDL work group to examine the research and development needs identified in the task force report. Both TCEQ...

  8. Tips: Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tips: Lighting Tips: Lighting Lighting choices save you money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. Lighting choices save you money....

  9. Coal liquefaction process

    DOE Patents [OSTI]

    Skinner, Ronald W. (Allentown, PA); Tao, John C. (Perkiomenville, PA); Znaimer, Samuel (Vancouver, CA)

    1985-01-01

    This invention relates to an improved process for the production of liquid carbonaceous fuels and solvents from carbonaceous solid fuels, especially coal. The claimed improved process includes the hydrocracking of the light SRC mixed with a suitable hydrocracker solvent. The recycle of the resulting hydrocracked product, after separation and distillation, is used to produce a solvent for the hydrocracking of the light solvent refined coal.

  10. Salmonella detection and critical control point determination during poultry processing 

    E-Print Network [OSTI]

    Young, Suzanne D.

    2000-01-01

    sampling, thoracic skin flap sampling, and the FSIS approved sponge method in a turkey processing plant. Carcass rinse was consistently and significantly superior to tested alternatives for the detection of Salmonella in this plant. Salmonella recovery...

  11. Deficiencies of Lighting Codes and Ordinances in Controlling Light Pollution from Parking Lot Lighting Installations

    E-Print Network [OSTI]

    Royal, Emily

    2012-05-31

    The purpose of this research was to identify the main causes of light pollution from parking lot electric lighting installations and highlight the deficiencies of lighting ordinances in preventing light pollution. Using an industry-accepted lighting...

  12. OpenGL Lighting 13. OpenGL Lighting

    E-Print Network [OSTI]

    McDowell, Perry

    OpenGL Lighting 13. OpenGL Lighting · Overview of Lighting in OpenGL In order for lighting to have an effect in OpenGL, two things are required: A light An object to be lit Lights can be set to any color determine how they reflect the light which hits them. The color(s) of an object is determined

  13. CONNECTED LIGHTING SYSTEMS MEETING

    Office of Energy Efficiency and Renewable Energy (EERE)

    There is a lot of buzz today about the Internet of Things and the convergence of intelligent controllable light sources, communication networks, sensors, and data exchange in future lighting...

  14. Fast Light, Fast Neutrinos?

    E-Print Network [OSTI]

    Kevin Cahill

    2011-10-10

    In certain media, light has been observed with group velocities faster than the speed of light. The recent OPERA report of superluminal 17 GeV neutrinos may describe a similar phenomenon.

  15. Kyler Nelson Light Timer

    E-Print Network [OSTI]

    Kachroo, Pushkin

    designated by the user, the Arduino board will dim the light to save energy. The user designates the time instance, the light is dimmed using pulse width modulation (PWM) in the Arduino's pin number 11

  16. Automatic lighting controls demonstration

    SciTech Connect (OSTI)

    Rubinstein, F.; Verderber, R.

    1990-03-01

    The purpose of this work was to demonstrate, in a real building situation, the energy and peak demand reduction capabilities of an electronically ballasted lighting control system that can utilize all types of control strategies to efficiently manage lighting. The project has demonstrated that a state-of-the-art electronically ballasted dimmable lighting system can reduce energy and lighting demand by as least 50% using various combinations of control strategies. By reducing light levels over circulation areas (tuning) and reducing after hours light levels to accommodate the less stringent lighting demands of the cleaning crew (scheduling), lighting energy consumption on weekdays was reduced an average of 54% relative to the initial condition. 10 refs., 14 figs., 3 tabs.

  17. Porous light-emitting compositions

    DOE Patents [OSTI]

    Burrell, Anthony K. (Los Alamos, NM); McCleskey, Thomas Mark (Los Alamos, NM); Jia, Quanxi (Los Alamos, NM); Bauer, Eve (Los Alamos, NM); Mueller, Alexander H. (Los Alamos, NM)

    2012-04-17

    Light-emitting devices are prepared by coating a porous substrate using a polymer-assisted deposition process. Solutions of metal precursor and soluble polymers having binding properties for metal precursor were coated onto porous substrates. The coated substrates were heated at high temperatures under a suitable atmosphere. The result was a substrate with a conformal coating that did not substantially block the pores of the substrate.

  18. Approved Module Information for ME3023, 2014/5 Module Title/Name: Energy Efficiency Module Code: ME3023

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    for assessing thermal processes in industry. Key issues associated with energy usage and reduction includingApproved Module Information for ME3023, 2014/5 Module Title/Name: Energy Efficiency Module Code: ME3023 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits

  19. Approved Module Information for ME2033, 2014/5 Module Title/Name: Innovation Management Module Code: ME2033

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    property rights. Radical, incremental, product and process based innovation. Assessing organizationApproved Module Information for ME2033, 2014/5 Module Title/Name: Innovation Management Module Code technological innovation in a range of commercial organizations. Case studies will be used to underpin how

  20. Lighting and Daylight Harvesting 

    E-Print Network [OSTI]

    Bos, J.

    2011-01-01

    in 1992 to serve the lighting design needs of the architectural and interior design communities. With over fifty years of combined experience, our areas of expertise range from architectural and theatrical lighting to custom fixture design. Bos... Lighting Design We are active members of the International Association of Lighting Designers, the American Institute of Architects, the Illuminating Engineering Society, International Dark Skies Association and the United States Green Building Council...

  1. LED Lighting Retrofit 

    E-Print Network [OSTI]

    Shaw-Meadow, N.

    2011-01-01

    kWh is the one that never gets used? ?Dedicated to making environmentally responsible products? Ringdale Introduction LED Roadway Lighting Better Light, Fewer Watts. Period. Nathan Shaw-Meadow LED Lighting Specialist Ringdale ActiveLED ESL.../exponential efficiency growth often deters investment today 7 Challenges to Implementation ESL-KT-11-11-57 CATEE 2011, Dallas, Texas, Nov. 7 ? 9, 2011 ? Municipal Street Light Case Study 8 ? Replaced 400W High Pressure Sodium fixtures with 52W Active...

  2. Materials for solid state lighting

    SciTech Connect (OSTI)

    Johnson, S.G.; Simmons, J.A.

    2002-03-26

    Dramatic improvement in the efficiency of inorganic and organic light emitting diodes (LEDs and OLEDs) within the last decade has made these devices viable future energy efficient replacements for current light sources. However, both technologies must overcome major technical barriers, requiring significant advances in material science, before this goal can be achieved. Attention will be given to each technology associated with the following major areas of material research: (1) material synthesis, (2) process development, (3) device and defect physics, and (4) packaging. The discussion on material synthesis will emphasize the need for further development of component materials, including substrates and electrodes, necessary for improving device performance. The process technology associated with the LEDs and OLEDs is very different, but in both cases it is one factor limiting device performance. Improvements in process control and methodology are expected to lead to additional benefits of higher yield, greater reliability and lower costs. Since reliability and performance are critical to these devices, an understanding of the basic physics of the devices and device failure mechanisms is necessary to effectively improve the product. The discussion will highlight some of the more basic material science problems remaining to be solved. In addition, consideration will be given to packaging technology and the need for the development of novel materials and geometries to increase the efficiencies and reliability of the devices. The discussion will emphasize the performance criteria necessary to meet lighting applications, in order to illustrate the gap between current status and market expectations for future product.

  3. Light emitting device comprising phosphorescent materials for white light generation

    DOE Patents [OSTI]

    Thompson, Mark E.; Dapkus, P. Daniel

    2014-07-22

    The present invention relates to phosphors for energy downconversion of high energy light to generate a broadband light spectrum, which emit light of different emission wavelengths.

  4. And the Oscar for Sustainable Mobile Lighting Goes to.... Lighting...

    Energy Savers [EERE]

    And the Oscar for Sustainable Mobile Lighting Goes to.... Lighting Up Operations with Hydrogen and Fuel Cell Technology And the Oscar for Sustainable Mobile Lighting Goes to.......

  5. Y-12 Final Site-Wide Environmental Impact Statement Approved...

    National Nuclear Security Administration (NNSA)

    Final Site-Wide Environmental Impact Statement Approved | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile...

  6. BONNEVILLE POWER ADMINISTRATION'S REQUEST FOR APPROVAL 1 OF REVISED...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of an expiration date will not stop us from seeking alternatives for managing seasonal electricity oversupply. We will BONNEVILLE POWER ADMINISTRATION'S REQUEST FOR APPROVAL 17...

  7. DOE's Jefferson Lab Receives Approval To Start Construction of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE's Jefferson Lab Receives Approval To Start Construction of 310 Million Upgrade NEWPORT NEWS, Va., Sept. 15, 2008 - The U.S. Department of Energy's Thomas Jefferson National...

  8. Idaho Public Utilities Commission Approves Neal Hot Springs Power...

    Open Energy Info (EERE)

    Idaho Public Utilities Commission Approves Neal Hot Springs Power Purchase Agreement Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Idaho Public...

  9. Reshaping Its Skyline: Y-12 Recieves Approval to Begin Multi...

    National Nuclear Security Administration (NNSA)

    Reshaping Its Skyline: Y-12 Recieves Approval to Begin Multi-Building Biology Complex Demolition Project | National Nuclear Security Administration Facebook Twitter Youtube Flickr...

  10. Critical Decision 4 (CD-4) Approval Template | Department of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    More Documents & Publications Example BCP Template Critical Decision 2 (CD-2) Approval Template SOW and Key Performance Parameters (KPP) Handbook Final Version 9-30-2014...

  11. Solutia: Utilizing Sub-Metering to Drive Energy Project Approvals...

    Broader source: Energy.gov (indexed) [DOE]

    plant. Solutia: Utilizing Sub-Metering to Drive Energy Project Approvals Through Data (July 2011) More Documents & Publications Nissan North America: How Sub-Metering...

  12. BLM - Approved Resource Management Plan Amendments/Record of...

    Open Energy Info (EERE)

    BLM - Approved Resource Management Plan AmendmentsRecord of Decision for Solar Energy Development in Six Southwestern States Jump to: navigation, search OpenEI Reference...

  13. President Roosevelt Approves Production of Atomic Bomb | National...

    National Nuclear Security Administration (NNSA)

    Approves Production of Atomic Bomb | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation...

  14. Approved for Public Release Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public Release

  15. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public Release By

  16. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public Release

  17. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public Release50 am,

  18. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public Release50

  19. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public Release50

  20. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public Release50-

  1. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public Release50-

  2. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public Release50-

  3. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public Release50-7

  4. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public Release50-7

  5. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public Release50-7

  6. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public

  7. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public2:51 pm, Jul

  8. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public2:51 pm,

  9. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public2:51 pm,10:35

  10. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public2:51

  11. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public2:5111:59 am,

  12. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public2:5111:59

  13. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for Public2:5111:599:09

  14. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for

  15. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for4:28 pm, Oct 22, 2015

  16. Approved for Public Release; Further Dissemination Unlimited

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal8823 Revision 0 Approved for4:28 pm, Oct 22,

  17. Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting

    SciTech Connect (OSTI)

    None

    2009-10-01

    This report describes the process and results of a demonstration of solid-state lighting (SSL) technology combined with occupancy sensors in a set of upright grocery store freezer cases.

  18. Lighting Design | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Design Lighting Design Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of...

  19. Product Quality Assurance for Off-Grid Lighting in Africa

    SciTech Connect (OSTI)

    World Bank; Mills, Evan; Mills, Evan

    2008-07-13

    Although the emergence of markets for high efficiency off-grid lighting technologies holds promise, realizing the potential of this opportunity on a long-term, sustainable basis requires careful attention to issues of product quality, consumer protection, and the potential for significant 'market spoiling', in anticipation of increases of sales of low cost, low performance off-grid lighting products. The goal of the Lighting Africa quality assurance workshop was to articulate strategies to mitigate the dangers of market spoiling and to explore ways to protect consumers from misleading advertising for sales of inferior, off-grid lighting products in the context of Lighting Africa's overarching objective to support the industry in developing a robust off-grid lighting market in Africa. The workshop resulted in the identification of two strategic approaches for meeting Lighting Africa quality assurance programmatic needs. The first strategy is intended to meet a short-term programmatic need for quality associated with requests for lighting products by bulk procurement agents, such as in a World Bank-financed project. The development of procurement specifications and test procedures that could be used in a quality/usability screening method in order to provide guidance for forthcoming large volume purchases emerged as the best solution to meet this need. Such approaches are used in World Bank-financed solar home systems (SHSs) projects in Bangladesh, Sri Lanka, and China, among others. However, unlike the SHSs which have multiple balance-of-system (BOS) components warranting the need for an array of specifications for individual components, stand alone lighting systems require specifications that are amenable to individual light points. To test this approach, Lighting Africa elected to use the technical specifications issued by the Photovoltaic Global Approval Program for solar lanterns that use CFL bulbs (PVRS11A) as the basis of qualifying such products. A contract has been competitively awarded to the Global Approval Program for Photovoltaics (PV GAP) under the Lighting Africa Program to select and test ten solar lantern product models. Lantern selection will be determined based on a number of criteria, among them, the ability to provide a daily duty cycle of at least 3 hours of light, the number of days of autonomy of battery, the volume of sales (especially in Africa), and whether or not the manufacturing facility is ISO 9000 certified. Those that are confirmed as meeting the specifications may be eligible to receive a PVGAP quality seal. The work is being carried out in partnership with the Photovoltaic and Wind Quality Test Center in Beijing, China and TUV Rhineland in Koeln, Germany. As off-grid LED-based stand-alone lighting products is in a nascent stage of development compared to CFL-based lanterns, Lighting Africa will support the development of a 'Quality Screening' approach to selecting LED lighting, in order not to delay consumers benefiting from such advances. The screening methodology could be used by procurement agencies to qualify LED lighting products for bulk or programmatic procurements. The main elements of this work comprises of developing a procurement specification and test procedure for undertaking a 'quick' quality/usability screening to be used for procuring LED lights and to test up to 30 LED-based lights to screen products that meet the requirement. The second strategy is intended to meet a longer-term need associated with creating a self-sustaining product quality assurance program that will effectively protect the African consumer, prevent significant market spoiling, adapt with expected technological advancements over the long-term--in other words, give consumers the ability to detect quality products and the information needed to find products that meet their specific needs from among the myriad of lighting products that become available commercially. Workshop discussions and the discussions evolving from the workshop led the Lighting Africa team to opt for an approach similar to that of th

  20. Light extraction from organic light-emitting diodes for lighting applications by sand-blasting

    E-Print Network [OSTI]

    Light extraction from organic light-emitting diodes for lighting applications by sand@ust.hk Abstract: Light extraction from organic light-emitting diodes (OLEDs) by scattering the light is one of the effective methods for large-area lighting applications. In this paper, we present a very simple and cost

  1. Induction Lighting: An Old Lighting Technology Made New Again

    Broader source: Energy.gov [DOE]

    Induction lighting is one of the best kept secrets in energy-efficient lighting. Simply stated, induction lighting is essentially a fluorescent light without electrodes or filaments, the items that...

  2. Bright Light-Emitting Diodes based on Organometal Halide Perovskite

    E-Print Network [OSTI]

    Tan, Zhi-Kuang; Moghaddam, Reza Saberi; Lai, May Ling; Docampo, Pablo; Higler, Ruben; Deschler, Felix; Price, Michael; Sadhanala, Aditya; Pazos, Luis M.; Credgington, Dan; Hanusch, Fabian; Bein, Thomas; Snaith, Henry J.; Friend, Richard H.

    2014-08-03

    temperature and high vacuum processes, rendering them uneconomical for use in large area displays. Here, we report high brightness light-emitting diodes based on solution-processed organometal halide perovskites. We demonstrate electroluminescence in the near...

  3. Light front distribution of the chiral condensate

    E-Print Network [OSTI]

    Lei Chang; Craig D. Roberts; Sebastian M. Schmidt

    2013-09-19

    The pseudoscalar projection of the pion's Poincare'-covariant Bethe-Salpeter amplitude onto the light-front may be understood to provide the probability distribution of the chiral condensate within the pion. Unlike the parton distribution amplitudes usually considered and as befitting a collective effect, this condensate distribution receives contributions from all Fock space components of the pion's light-front wave-function. We compute this condensate distribution using the Dyson-Schwinger equation (DSE) framework and show the result to be a model-independent feature of quantum chromodynamics (QCD). Our analysis establishes that this condensate is concentrated in the neighbourhood of the boundaries of the distribution's domain of support. It thereby confirms the dominant role played by many-particle Fock states within the pion's light-front wave function in generating the chiral condensate on the light-front and verifies that light-front longitudinal zero modes do not play a material role in that process.

  4. Lighting the Night: Technology, Urban Life and the Evolution of Street Lighting [Light in Place

    E-Print Network [OSTI]

    Holden, Alfred

    1992-01-01

    Electrical 16. "Highway Lighting by So­ dium Vapor Lamps,"Possibilities of Street: Lighting Improve­ ments," TheLaunches Broad Street Lighting Promotion Campaign," The

  5. Solid State Lighting Program (Falcon)

    SciTech Connect (OSTI)

    Meeks, Steven

    2012-06-30

    Over the past two years, KLA-Tencor and partners successfully developed and deployed software and hardware tools that increase product yield for High Brightness LED (HBLED) manufacturing and reduce product development and factory ramp times. This report summarizes our development effort and details of how the results of the Solid State Light Program (Falcon) have started to help HBLED manufacturers optimize process control by enabling them to flag and correct identified killer defect conditions at any point of origin in the process manufacturing flow. This constitutes a quantum leap in yield management over current practice. Current practice consists of die dispositioning which is just rejection of bad die at end of process based upon probe tests, loosely assisted by optical in-line monitoring for gross process deficiencies. For the first time, and as a result of our Solid State Lighting Program, our LED manufacturing partners have obtained the software and hardware tools that optimize individual process steps to control killer defects at the point in the processes where they originate. Products developed during our two year program enable optimized inspection strategies for many product lines to minimize cost and maximize yield. The Solid State Lighting Program was structured in three phases: i) the development of advanced imaging modes that achieve clear separation between LED defect types, improves signal to noise and scan rates, and minimizes nuisance defects for both front end and back end inspection tools, ii) the creation of defect source analysis (DSA) software that connect the defect maps from back-end and front-end HBLED manufacturing tools to permit the automatic overlay and traceability of defects between tools and process steps, suppress nuisance defects, and identify the origin of killer defects with process step and conditions, and iii) working with partners (Philips Lumileds) on product wafers, obtain a detailed statistical correlation of automated defect and DSA map overlay to failed die identified using end product probe test results. Results from our two year effort have led to “automated end-to-end defect detection” with full defect traceability and the ability to unambiguously correlate device killer defects to optically detected features and their point of origin within the process. Success of the program can be measured by yield improvements at our partner’s facilities and new product orders.

  6. ECE 466: LED Lighting Systems -Incandescent lightings rise and

    E-Print Network [OSTI]

    Connors, Daniel A.

    ECE 466: LED Lighting Systems - Incandescent lightings rise and demise via government policy - Alternative Fluorescent light sources and compact fluorescent lights (CFL) to incandescents - Alternative LED light sources - Color index as well as Watts to Lumens efficiency available from all three light sources

  7. Lighting and Surfaces 11.1 Introduction to Lighting

    E-Print Network [OSTI]

    Boyd, John P.

    Chapter 11 Lighting and Surfaces 11.1 Introduction to Lighting Three-dimensional surfaces can react to light, and how computer graphics simulates this. There are three species of light (or "illumination models"): 1. Intrinsic (self-emitting) 2. Ambient light (sometimes called "diffuse light") 3

  8. Approval of Salary Adjustment Program for 2010 Monaco, Marie

    E-Print Network [OSTI]

    Davis, Ernest

    #12;#12;#12;#12;#12;#12;#12;#12;Approval of Salary Adjustment Program for 2010 Monaco, Marie Sent to learn of your decision to approve the implementation of the "Salary Adjustment Proposal of 2010 that the salary reductions planned for some tenured faculty violate the guarantee of "economic security" as stated

  9. Extended Approval Policy for Nonmedical Human Subjects in Research

    E-Print Network [OSTI]

    Biederman, Irving

    in whole or in part, or that involve greater than minimal risk, are subject to the full terms6/15/2011 Extended Approval Policy for Nonmedical Human Subjects in Research Stanford University the approval period for nonfederally sponsored research involving no more than minimal risk (as defined by 45

  10. Study Abroad Approval Form rev 07-02-13 1

    E-Print Network [OSTI]

    Study Abroad Approval Form rev 07-02-13 1 Name: ___________________________________________ VIP ID approval form on file with the Study Abroad Office in order to: 1) ensure credit earned abroad is accepted at USC upon completion of the study abroad program; 2) maintain enrollment at USC while abroad; and 3

  11. Waste Feed Delivery Environmental Permits and Approvals Plan

    SciTech Connect (OSTI)

    TOLLEFSON, K.S.

    2000-01-18

    This plan describes the environmental permits approvals, and other requirements that may affect establishment of a waste feed delivery system for the Hanford Site's River Protection Project. This plan identifies and screens environmental standards for potential applicability, outlines alternatives for satisfying applicable standards, and describes preferred permitting and approval approaches.

  12. April 14, 2010 Official and Approved Minutes

    E-Print Network [OSTI]

    O'Toole, Alice J.

    out lights and recycling paper, plastic and cans. One change that has been made is that the University is now using 100% of our landscape waste as mulch. It was also noted that the new Student Services

  13. Approved Module Information for EC112C, 2014/5 Module Title/Name: Geology and Soil Science Module Code: EC112C

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for EC112C, 2014/5 Module Title/Name: Geology and Soil Science Module with an introduction to: geology and rock types; the surface weathering and erosion processes leading to the formation: Knowledge and Understanding i. an appreciation of geological processes and timescale; ii. an understanding

  14. Sandia Energy - Light Creation Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Light Creation Materials Home Energy Research EFRCs Solid-State Lighting Science EFRC Overview Light Creation Materials Light Creation MaterialsAlyssa Christy2015-03-26T16:28:52+00...

  15. Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM

    E-Print Network [OSTI]

    Project Summaries ELEMENT 2: ADVANCE LIGHTING TECHNOLOGIES PROJECT 2.1 LIGHT EMITTING DIODE (LED light emitting diodes (LED) technology for general lighting applications by developing a task lamp

  16. Notice of Office of Management and Budget Action to Approve with...

    Broader source: Energy.gov (indexed) [DOE]

    Notice of Office of Management and Budget Action to Approve with Change the Information Collection Request (ICR) for an Extension without Change of a Currently Approved Collection...

  17. High efficiency incandescent lighting

    DOE Patents [OSTI]

    Bermel, Peter; Ilic, Ognjen; Chan, Walker R.; Musabeyoglu, Ahmet; Cukierman, Aviv Ruben; Harradon, Michael Robert; Celanovic, Ivan; Soljacic, Marin

    2014-09-02

    Incandescent lighting structure. The structure includes a thermal emitter that can, but does not have to, include a first photonic crystal on its surface to tailor thermal emission coupled to, in a high-view-factor geometry, a second photonic filter selected to reflect infrared radiation back to the emitter while passing visible light. This structure is highly efficient as compared to standard incandescent light bulbs.

  18. National Synchrotron Light Source

    ScienceCinema (OSTI)

    BNL

    2009-09-01

    A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

  19. Dispersive Treatments of $K_{\\ell4}$ Decays and Hadronic Light-by-Light Scattering

    E-Print Network [OSTI]

    Peter Stoffer

    2014-12-16

    In this thesis, I present dispersive treatments of two hadronic processes: the semileptonic kaon decay $K_{\\ell4}$ and hadronic light-by-light scattering. The $K_{\\ell4}$ decay is one of the best sources of information on some of the parameters of chiral perturbation theory. The dispersion relation for $K_{\\ell4}$ provides a resummation of $\\pi\\pi$- and $K\\pi$-rescattering effects. In contrast to a pure chiral treatment, it reproduces the observed curvature of one of the form factors. The matching of the dispersion relation to the chiral representation of the form factors allows the extraction of the values of three low-energy constants. Hadronic light-by-light scattering appears as a virtual process in the calculation of the anomalous magnetic moment of the muon $(g-2)_\\mu$. For more than a decade, a discrepancy of about $3\\sigma$ has persisted between the experimental determination and the standard-model prediction of the $(g-2)_\\mu$. It is expected that within a few years hadronic light-by-light scattering will dominate the uncertainty of the theory prediction of the $(g-2)_\\mu$. So far, only model calculations of the hadronic light-by-light contribution are available. However, in view of forthcoming $(g-2)_\\mu$ experiments at Fermilab and J-PARC it is crucial that the hadronic light-by-light calculation can be improved systematically. The dispersive description presented here provides a formalism for a data-driven determination of hadronic light-by-light scattering and hence opens up an avenue towards a model-independent evaluation of the $(g-2)_\\mu$.

  20. CLASS TIME CONFLICT APPROVAL You must have approval from both instructors to register for classes that have less

    E-Print Network [OSTI]

    Thomas, David D.

    CLASS TIME CONFLICT APPROVAL DIRECTIONS You must have approval from both instructors to register for classes that have less than a one (1) minute separation or overlapping times. If an instructor has not yet been assigned for a class, contact the department offering the class to obtain an authorized signature

  1. Faster Than Light?

    E-Print Network [OSTI]

    Robert Geroch

    2010-05-10

    It is argued that special relativity remains a viable physical theory even when there is permitted signals traveling faster than light.

  2. Comparing Light Bulbs

    Office of Energy Efficiency and Renewable Energy (EERE)

    In this exercise, students will use a light to demonstrate the difference between being energy-efficient and energy-wasteful, and learn what energy efficiency means.

  3. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Illuminance Assignments for CBECS Building Activity Categories Illuminance ranges were adopted from the 1987 Illuminating Engineering Society (IES) Lighting Handbook. The IES...

  4. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    from the engineering literature, based on CBECS building activity.) 4. Efficacy: an energy efficiency measure. Technically, the amount of light produced per unit of energy...

  5. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    (CEC), March 1990. Advanced Lighting Technologies Application Guidelines (ALTAG), Building and Appliance Efficiency Office. 3. Dubin, F.S., Mindell, H.L., and Bloome, S., 1976....

  6. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    energy are presented in this section. Statistics are presented by subgroups based on building characteristics, and by subgroups based on lighting equipment. The three sets of...

  7. Light-trapping concentrator cells

    SciTech Connect (OSTI)

    Keavney, C.J.; Geoffroy, L.M.; Sanfacon, M.M.; Tobin, S.P. (Spire Corp., Bedford, MA (USA))

    1989-11-01

    The objective of this project was to develop a thin, light-trapping silicon concentrator solar cell using a new structure, the cross-grooved cell. A process was developed for fabricating V-grooves on both sides of thin silicon wafers, the grooves on one side being perpendicular to those on the other side. A novel way of minimizing flat spots at the tops of the V-grooves was discovered. We experimentally verified the theoretical light-trapping superiority of the cross-grooved structure. We also demonstrated a reduction in grid line obscuration for grid lines running parallel to the V-grooves due to light reflection into the cell. high short-circuit current densities were achieved for p-i-n concentrator cells with the cross-grooved structure, proving the concept. The best efficiencies achieved were 18% at concentration, compared to 20% for a conventional planar low-resistivity cell. Recombination in the full-area emitter was identified as the major intrinsic loss mechanism in these thin, high-resistivity bifacial cells. Recombination on the emitter limits Voc and fill factor, and also leads to a large sublinearity of short-circuit current with light intensity. Reduction of the junction area is a major recommendation for future work. In addition, there were persistent problems with ohmic contacts and maintaining high minority-carrier lifetime during processing. We believe that these problems can be solved, and that the cross-grooved cell is a viable approach to the limit-efficiency silicon solar cell. This report covers research conducted between March 1987 and July 1989. 22 refs., 40 figs., 24 tabs.

  8. Edmund G. Brown Jr. LIGHTING CALIFORNIA'S FUTURE

    E-Print Network [OSTI]

    Edmund G. Brown Jr. Governor LIGHTING CALIFORNIA'S FUTURE: SMART LIGHT-EMITTING DIODE LIGHTING's Future: Smart LightEmitting Diode Lighting in Residential Fans. California Energy Commission, PIER

  9. Polymer OLED White Light Development Program

    SciTech Connect (OSTI)

    Homer Antoniadis; Vi-En Choong; Stelios Choulis; Brian Cumpston; Rahul Gupta; Mathew Mathai; Michael Moyer; Franky So

    2005-12-19

    OSRAM Opto Semiconductors (OSRAM) successfully completed development, fabrication and characterization of the large area, polymer based white light OLED prototype at their OLED Research and Development (R&D) facility in San Jose, CA. The program, funded by the Department of Energy (DOE), consisted of three key objectives: (1) Develop new polymer materials and device architectures--in order to improve the performance of organic light emitters. (2) Develop processing techniques--in order to demonstrate and enable the manufacturing of large area, white light and color tunable, solid state light sources. (3) Develop new electronics and driving schemes for organic light sources, including color-tunable light sources. The key performance goals are listed. A world record efficiency of 25 lm/W was established for the solution processed white organic device from the significant improvements made during the project. However, the challenges to transfer this technology from an R&D level to a large tile format such as, the robustness of the device and the coating uniformity of large area panels, remain. In this regard, the purity and the blend nature of the materials are two factors that need to be addressed in future work. During the first year, OSRAM's Materials and Device group (M&D) worked closely with the major polymer material suppliers to develop the polymer emissive technology. M&D was successful in demonstrating a 7-8 lm/W white light source which was based on fluorescent materials. However, it became apparent that the major gains in efficiency could only be made if phosphorescent materials were utilized. Thus, in order to improve the performance of the resulting devices, the focus of the project shifted towards development of solution-processable phosphorescent light emitting diodes (PHOLEDs) and device architectures. The result is a higher efficiency than the outlined project milestone.

  10. Explosively pumped laser light

    DOE Patents [OSTI]

    Piltch, Martin S. (Los Alamos, NM); Michelotti, Roy A. (Los Alamos, NM)

    1991-01-01

    A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

  11. Light intensity compressor

    DOE Patents [OSTI]

    Rushford, Michael C. (Livermore, CA)

    1990-01-01

    In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

  12. Quantum Dot Light Enhancement Substrate for OLED Solid-State Lighting

    SciTech Connect (OSTI)

    James Perkins; Matthew Stevenson; Gagan Mahan; Seth Coe-Sullivan; Peter Kazlas

    2011-01-21

    With DOE Award No. DE-EE00000628, QD Vision developed and demonstrated a cost-competitive solution for increasing the light extraction efficiency of OLEDs with efficient and stable color rendering index (CRI) for solid state lighting (SSL). Solution processable quantum dot (QD) films were integrated into OLED ITO-glass substrates to generate tunable white emission from blue emitting OLED) devices as well as outcouple light from the ITO film. This QD light-enhancement substrate (QD-LED) technology demonstrated a 60% increase in OLED forward light out-coupling, a value which increases to 76% when considering total increase in multi-directional light output. The objective for the first year was an 80% increase in light output. This project seeks to develop and demonstrate a cost-competitive solution for realizing increased extraction efficiency organic light emitting devices (OLEDs) with efficient and stable color rendering index (CRI) for SSL. Solution processible quantum dot (QD) films will be utilized to generate tunable white emission from blue emitting phosphorescent OLED (Ph-OLED) devices.

  13. Lighting affects appearance LightSource emits photons

    E-Print Network [OSTI]

    Jacobs, David

    1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Reflectance Model how objects reflect light. Model light sources Algorithms for computing Shading: computing intensities within polygons Determine what light strikes what

  14. VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS

    E-Print Network [OSTI]

    Greenberg, Albert

    VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS Andrea Basso method to improve the lighting conditions of a real scene or video sequence. In particular we concentrate on modifying real light sources intensities and inserting virtual lights into a real scene viewed from a fixed

  15. LightBox -Exploring Interaction Modalities with Colored Light

    E-Print Network [OSTI]

    of light to very subtle animations, transitions and dimmed lighting effects. Implementation LightBox is housed in an aluminum suitcase measuring 48x38x25cm. The lid of the suitcase contains a panel of 12x12 Design. Figure 1. An animated lighting sequence visualized on the hi-power LEDs of LightBox #12

  16. Indoor positioning algorithm using light-emitting diode visible light

    E-Print Network [OSTI]

    Kavehrad, Mohsen

    Indoor positioning algorithm using light- emitting diode visible light communications Zhou Zhou of Use: http://spiedl.org/terms #12;Indoor positioning algorithm using light-emitting diode visible light. This paper proposes a novel indoor positioning algorithm using visible light communications (VLC

  17. Requirements, guidance and logic in planning environmental investigations: Approval versus implementation

    SciTech Connect (OSTI)

    Brice, D.A. [3D/Environmental Services, Inc., Cincinnati, OH (United States); Meredith, D.V.; Harris, M.Q. [Fernald Environmental Restoration Management Corp., Cincinnati, OH (United States). Fernald Environmental Management Project

    1993-09-09

    In today`s litigious society, it is important for both private parties and government to plan and conduct environmental investigations in a scientifically sound manner, documenting the purpose, methods, and results in a consistent fashion throughout the exercise. Planning documents are prepared during the initial phases of environmental investigations. Project objectives, including data quality requirements, specific work to be conducted to fulfill data needs, and operating procedures are specified. Regulatory agency approval of these documents is often required prior to plan implementation. These approvals are necessary and appropriate to fulfilling the agency`s mandated role. Many guidance documents prepared by regulatory agencies suggest the content and format of various scoping documents. These guidances help standardize thought processes and considerations in planning, and provide a template to ensure that both the plan and the proposed work will fulfill regulatory requirements. This work describes the preparation and use of guidance documents for planning environmental studies. The goals and some of the pitfalls of such documents are discussed. Guidance should include the following elements: the purpose of the guidance and a description of where it applies; the type of items to be addressed in planning; identification of requirements are applicable to all projects for which the guidance is intended; identification of requirements only applicable in certain situations; a description of items to facilitate planning; a suggested format for fulfilling requirements; example applications of the guidance. Disagreements arise between planners and reviewers/approvers when elements of guidance are used as leverage to require work not directly related to project objectives. Guidance may be inappropriately used as a milestone by which site-specific plans are judged. Regulatory agency review and approval may be regarded as a primary objective of the plan.

  18. Memorandum Approval of a Permanenet Variance Regarding Static Magnetic Fields at Brookhaven National Laboratory (Variance 1021)

    Broader source: Energy.gov [DOE]

    Approval of a Permanenet Variance Regarding Static Magnetic Fields at Brookhaven National Laboratory (Variance 1021)

  19. Resonant Visible Light Modulation with Graphene

    E-Print Network [OSTI]

    Yu, Renwen; de Abajo, F Javier Garcia

    2015-01-01

    Fast modulation and switching of light at visible and near-infrared (vis-NIR) frequencies is of utmost importance for optical signal processing and sensing technologies. No fundamental limit appears to prevent us from designing wavelength-sized devices capable of controlling the light phase and intensity at gigaherts (and even terahertz) speeds in those spectral ranges. However, this problem remains largely unsolved, despite recent advances in the use of quantum wells and phase-change materials for that purpose. Here, we explore an alternative solution based upon the remarkable electro-optical properties of graphene. In particular, we predict unity-order changes in the transmission and absorption of vis-NIR light produced upon electrical doping of graphene sheets coupled to realistically engineered optical cavities. The light intensity is enhanced at the graphene plane, and so is its absorption, which can be switched and modulated via Pauli blocking through varying the level of doping. Specifically, we explor...

  20. White light velocity interferometer

    DOE Patents [OSTI]

    Erskine, D.J.

    1999-06-08

    The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

  1. Green Light Pulse Oximeter

    DOE Patents [OSTI]

    Scharf, John Edward (Oldsmar, FL)

    1998-11-03

    A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

  2. Lakeview Light and Power- Commercial Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is...

  3. Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting

    SciTech Connect (OSTI)

    None

    2009-11-01

    A U.S. Department of Energy Solid-State Lighting Gateway Report on a Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting in Lija Loop, Portland, Oregon.

  4. Plasma Processing Of Hydrocarbon

    SciTech Connect (OSTI)

    Grandy, Jon D; Peter C. Kong; Brent A. Detering; Larry D. Zuck

    2007-05-01

    The Idaho National Laboratory (INL) developed several patented plasma technologies for hydrocarbon processing. The INL patents include nonthermal and thermal plasma technologies for direct natural gas to liquid conversion, upgrading low value heavy oil to synthetic light crude, and to convert refinery bottom heavy streams directly to transportation fuel products. Proof of concepts has been demonstrated with bench scale plasma processes and systems to convert heavy and light hydrocarbons to higher market value products. This paper provides an overview of three selected INL patented plasma technologies for hydrocarbon conversion or upgrade.

  5. Secretary Jewell Announces Approval of Second Utility-Scale Solar...

    Energy Savers [EERE]

    on American Indian Trust Land Secretary Jewell Announces Approval of Second Utility-Scale Solar Energy Project on American Indian Trust Land May 8, 2014 - 4:41pm Addthis As part of...

  6. APPROVED 12/17/07 University Graduate Council

    E-Print Network [OSTI]

    APPROVED 12/17/07 University Graduate Council October 8, 2007 Minutes Present: K. Klomparens (TGS (MUS), R. Campa (CANR/TGS), L. Kielman (CON), M. Noel (CHM), C. Petty (EGR), S. Dilley (BUS), J

  7. Solutia: Utilizing Sub-Metering to Drive Energy Project Approvals...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solutia: Utilizing Sub-Metering to Drive Energy Project Approvals Through Data Solutia, Inc. has a long history with sub-metering, dating back to the construction of some of its...

  8. UAB President Carol Garrison has approved 11 campuswide proposals

    E-Print Network [OSTI]

    Bedwell, David M.

    UAB President Carol Garrison has approved 11 campuswide proposals that could make sig- nificant n i t y Reporter november 6, 2006 Vol. 31 No. 3 Garrison new tb outbreak in Africa is red flag

  9. Radiochemical Separation & Processing | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in specially-designed equipment in one of the hot cells in Building 7920. Solvent extraction flowsheets for processing irradiated fuels from commercial light water reactors...

  10. Columbia Water & Light- HVAC and Lighting Efficiency Rebates

    Broader source: Energy.gov [DOE]

    Columbia Water & Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain...

  11. Peninsula Light Company- Commercial Efficient Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service....

  12. Light Vector Mesons

    E-Print Network [OSTI]

    Alexander Milov

    2008-12-21

    This article reviews the current status of experimental results obtained in the measurement of light vector mesons produced in proton-proton and heavy ion collisions at different energies. The review is focused on two phenomena related to the light vector mesons; the modification of the spectral shape in search of Chiral symmetry restoration and suppression of the meson production in heavy ion collisions. The experimental results show that the spectral shape of light vector mesons are modified compared to the parameters measured in vacuum. The nature and the magnitude of the modification depends on the energy density of the media in which they are produced. The suppression patterns of light vector mesons are different from the measurements of other mesons and baryons. The mechanisms responsible for the suppression of the mesons are not yet understood. Systematic comparison of existing experimental results points to the missing data which may help to resolve the problem.

  13. lighting in the library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    lamp produces about 1750 lumens. Footcandle: a lumen of light distributed over a 1-square-foot (0.09-square-meter) area. Ideal Illumination: the minimum number of footcandles...

  14. Solid State Lighting Reliability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid State Lighting Reliability 2015Building Technologies Office Peer Review Lynn Davis, PhD RTI International ldavis@rti.org --- 919-316-3325 Project Summary Timeline: Start...

  15. The Facts of Light

    E-Print Network [OSTI]

    Horn, Berthold K.P.

    This is a random collection of facts about radiant and luminous energy. Some of this information may be useful in the design of photo-diode image sensors, in the set-up of lighting for television microscopes and the ...

  16. National Synchrotron Light Source

    ScienceCinema (OSTI)

    None

    2010-01-08

    A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

  17. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    5.2 152.6 160.5 54.6 Assembly Health Care Lodging Office 0 20 40 60 80 100 120 140 160 180 Energy Information Administration Energy Consumption Series: Lighting in Commercial...

  18. LIGHT PHOTINOS AS DARK MATTER

    E-Print Network [OSTI]

    Glennys R. Farrar; Edward W. Kolb

    1995-04-24

    There are good reasons to consider models of low-energy supersymmetry with very light photinos and gluinos. In a wide class of models the lightest $R$-odd, color-singlet state containing a gluino, the $\\r0$, has a mass in the 1-2 GeV range and the slightly lighter photino, $\\pho$, would survive as the relic $R$-odd species. For the light photino masses considered here, previous calculations resulted in an unacceptable photino relic abundance. But we point out that processes other than photino self-annihilation determine the relic abundance when the photino and $R^0$ are close in mass. Including $\\r0\\longleftrightarrow\\pho$ processes, we find that the photino relic abundance is most sensitive to the $\\r0$-to-$\\pho$ mass ratio, and within model uncertainties, a critical density in photinos may be obtained for an $\\r0$-to-$\\pho$ mass ratio in the range 1.2 to 2.2. We propose photinos in the mass range of 500 MeV to 1.6 GeV as a dark matter candidate, and discuss a strategy to test the hypothesis.

  19. Solid state lighting component

    DOE Patents [OSTI]

    Yuan, Thomas; Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald

    2010-10-26

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  20. Solid state lighting component

    DOE Patents [OSTI]

    Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald; Yuan, Thomas

    2012-07-10

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  1. LED Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and rapidly-developing lighting...

  2. Energy Conservation in Industrial Lighting 

    E-Print Network [OSTI]

    Meharg, E.

    1979-01-01

    were identified. Savings in power and cost were quantified for typical examples as follows: Task lighting, high light source efficacy, high luminaire mounting height, efficient luminaires, surroundings painted a light color, regular luminaire cleaning...

  3. Higher order light propagation volumes

    E-Print Network [OSTI]

    Martin, Timothy Ly; Martin, Timothy Ly

    2012-01-01

    1.1 Introduction . . . . . . . . . 1.2 Light Propagation4.1.1 Injection of Virtual Point Lights and Geometryof the Stanford bunny, lit by an area light, rendered using

  4. Light as a Healing Mechanism

    E-Print Network [OSTI]

    Lingampalli, Nithya

    2013-01-01

    S. (1991). Meridians conduct light. Moskow: Raum and Zeit.the bod’ys absorption of light. Explore, 9(2), doi: https://01). The healing use of light and color. Health Care Design

  5. Lighting and the Bottom Line 

    E-Print Network [OSTI]

    Christensen, M.

    1981-01-01

    A discussion of the cost of light and how it relates to the cost of people. The new Illuminating Engineering Society recommended method of determining lighting levels will be explained. Also several ways of providing good lighting to increase...

  6. Visual Attention: Light Enters the Jochen Braun

    E-Print Network [OSTI]

    Braun, Jochen

    Visual Attention: Light Enters the Jungle Jochen Braun Recent studies focusing on basic visual-perceptual processing that awareness entails -- short-term memory, percep- tual decisions, voluntary responses and so time. The coaxing was done by a visual search near fixation, which the observer was obliged to carry

  7. New Light Sources for Tomorrow's Lighting Designs 

    E-Print Network [OSTI]

    Krailo, D. A.

    1986-01-01

    and lighting systems. Table 2 shows the development of four-foot energy-saving retrofit lamps. By utilizing new cathode designed and different gas fills, 34-watt energy-saving lamps were developed that operate on existing rapid start ballasts and afford... of fluorescent lamps, two watts of system power are consumed in heating the lamp cath odes. The shedding of cathode heating wattage was the next lamp efficiency improvement to be introduced. One available sy tern dis connects the lamp cathodes from...

  8. Lighting Design | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    as part of your whole-house design -- an approach for building an energy-efficient home. Indoor Lighting Design When designing indoor lighting for energy efficiency,...

  9. GATEWAY Demonstrations: LED Street Lighting

    SciTech Connect (OSTI)

    Cook, Tyson; Shackelford, Jordan; Pang, Terrance Pang

    2008-12-01

    This report summarizes an assessment project conducted to study the performance of light emitting diode (LED) luminaires in a street lighting application in San Francisco, CA.

  10. Interior Lighting Efficiency for Municipalities

    Broader source: Energy.gov [DOE]

    This webinar covered a basic understanding of lighting, different types of lamps and luminaries, importance of energy efficiency in lighting, and knowledge of where to find financial resources.

  11. 2010 US Lighting Market Characterization

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2010 U.S. Lighting Market Characterization January 2012 Prepared for: Solid-State Lighting Program Building Technologies Program Office of Energy Efficiency and Renewable Energy...

  12. Lighting Controls | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    fluorescent lighting fixtures rather than replace them. Dimmers and LEDs Some light-emitting diode (LED) lightbulbs can be used with dimmers. LED bulbs and fixtures must be...

  13. Storage and Retrieval of Thermal Light in Warm Atomic Vapor

    E-Print Network [OSTI]

    Young-Wook Cho; Yoon-Ho Kim

    2010-07-12

    We report slowed propagation and storage and retrieval of thermal light in warm rubidium vapor using the effect of electromagnetically-induced transparency (EIT). We first demonstrate slowed-propagation of the probe thermal light beam through an EIT medium by measuring the second-order correlation function of the light field using the Hanbury-Brown$-$Twiss interferometer. We also report an experimental study on the effect of the EIT slow-light medium on the temporal coherence of thermal light. Finally, we demonstrate the storage and retrieval of thermal light beam in the EIT medium. The direct measurement of the photon number statistics of the retrieved light field shows that the photon number statistics is preserved during the storage and retrieval process.

  14. Light emitting diode with high aspect ratio submicron roughness for light extraction and methods of forming

    SciTech Connect (OSTI)

    Li, Ting (Ventura, CA)

    2011-04-26

    The surface morphology of an LED light emitting surface is changed by applying a reactive ion etch (RIE) process to the light emitting surface. High aspect ratio, submicron roughness is formed on the light emitting surface by transferring a thin film metal hard-mask having submicron patterns to the surface prior to applying a reactive ion etch process. The submicron patterns in the metal hard-mask can be formed using a low cost, commercially available nano-patterned template which is transferred to the surface with the mask. After subsequently binding the mask to the surface, the template is removed and the RIE process is applied for time duration sufficient to change the morphology of the surface. The modified surface contains non-symmetric, submicron structures having high aspect ratio which increase the efficiency of the device.

  15. Light emitting diode with high aspect ratio submicron roughness for light extraction and methods of forming

    DOE Patents [OSTI]

    Li, Ting

    2013-08-13

    The surface morphology of an LED light emitting surface is changed by applying a reactive ion etch (RIE) process to the light emitting surface. High aspect ratio, submicron roughness is formed on the light emitting surface by transferring a thin film metal hard-mask having submicron patterns to the surface prior to applying a reactive ion etch process. The submicron patterns in the metal hard-mask can be formed using a low cost, commercially available nano-patterned template which is transferred to the surface with the mask. After subsequently binding the mask to the surface, the template is removed and the RIE process is applied for time duration sufficient to change the morphology of the surface. The modified surface contains non-symmetric, submicron structures having high aspect ratio which increase the efficiency of the device.

  16. Digital image processing of coal stream combustion 

    E-Print Network [OSTI]

    Gopalakrishnan, Chengappalli Periyasamy

    1994-01-01

    DIGITAL IMAGE PROCESSING OF COAL STREAM COMBUSTION A Thesis by CHENGAPPALLI PERIYASAMY GOPALAKRISHNAN Submitted to Texas A k M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Approved as to style... and content by: a yan Annama at (Chair of Committee) en (Member) Norman C. Gris old (Member) George Peterson (Head of Department) May 1994 Major Subject: Mechanical Engineering ABSTRACT Digital Image Processing of Coal Stream Combustion. (May 1994...

  17. Processing alternatives for glandless cottonseed oil 

    E-Print Network [OSTI]

    Chamkasem, Narong

    1981-01-01

    PROCESSING ALTERNATIVES FOR GLANDLESS COTTONSEED OIL A Thesis by NARONG C~SEM Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE May 1981 Major Subject...: Food Science and Technology PROCESSING ALTERNATIVES FOR GLANDLESS COTTONSEED OIL A Thesis by NARONG CHAMKASEM Approved as to style and content by: (Chairman of Committee) (Me r) (Member) ember) ;. +7+i~', P; I j Head of D artment) May 1981...

  18. California Streamlines Approvals for Renewable Energy Projects...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    between the California Energy Commission (CEC) and the California Department of Fish and Game to create a "one-stop" permitting process. The collaboration, called the...

  19. Lighting affects appearance LightSource emits photons

    E-Print Network [OSTI]

    Jacobs, David

    1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Basic fact: Light is linear Double intensity of sources, double photons reaching eye. Turn on two lights, and photons reaching eye are same as sum of number when each

  20. Quasi light fields: extending the light field to coherent radiation

    E-Print Network [OSTI]

    Wornell, Gregory W.

    Quasi light fields: extending the light field to coherent radiation Anthony Accardi1,2 and Gregory light field, and for coherent radiation using electromagnetic field theory. We present a model of coherent image formation that strikes a balance between the utility of the light field

  1. Interior Light Level Measurements Appendix F -Interior Light Level Measurements

    E-Print Network [OSTI]

    Appendix F ­ Interior Light Level Measurements #12;F.1 Appendix F - Interior Light Level. A potential concern is that a lower VT glazing may increase electric lighting use to compensate for lost qualify and quantify a representative loss of daylighting, and therefore electric lighting use

  2. Demonstration Assessment of LED Roadway Lighting: Philadelphia...

    Office of Scientific and Technical Information (OSTI)

    LED Roadway Lighting: Philadelphia, PA Royer, Michael P.; Tuenge, Jason R.; Poplawski, Michael E. Roadway Lighting; Solid-state lighting; LED lighting; SSL; LED; GATEWAY Roadway...

  3. Lighting Principles and Terms | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Principles and Terms Lighting Principles and Terms Light quantity, energy consumption, and light quality are the basic principles of lighting. | Photo courtesy of

  4. Testimonials - Partnerships in LED Lighting - Philips Lumileds...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LED Lighting - Philips Lumileds Lighting, LLC Testimonials - Partnerships in LED Lighting - Philips Lumileds Lighting, LLC Addthis An error occurred. Try watching this video on...

  5. Interaction between two stopped light pulses

    SciTech Connect (OSTI)

    Chen, Yi-Hsin, E-mail: yhchen920@gmail.com; Lee, Meng-Jung, E-mail: yhchen920@gmail.com; Hung, Weilun, E-mail: yhchen920@gmail.com; Yu, Ite A., E-mail: yu@phys.nthu.edu.tw [Department of Physics and Frontier Research Center on Fundamental and Applied Sciences of Matters, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Chen, Ying-Cheng [Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei 10617, Taiwan and Department of Physics and Frontier Research Center on Fundamental and Applied Sciences of Matters, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Chen, Yong-Fan [Department of Physics, National Cheng Kung University, Tainan 70101, Taiwan (China)

    2014-03-05

    The efficiency of a nonlinear optical process is proportional to the interaction time. We report a scheme of all-optical switching based on two motionless light pulses via the effect of electromagnetically induced transparency. One pulse was stopped as the stationary light pulse (SLP) and the other was stopped as stored light. The time of their interaction via the medium can be prolonged and, hence, the optical nonlinearity is greatly enhanced. Using a large optical density (OD) of 190, we achieved a very long interaction time of 6.9 ?s. This can be analogous to the scheme of trapping light pulses by an optical cavity with a Q factor of 8×10{sup 9}. With the approach of using moving light pulses in the best situation, a switch can only be activated at 2 photons per atomic absorption cross section. With the approach of employing a SLP and a stored light pulse, a switch at only 0.56 photons was achieved and the efficiency is significantly improved. Moreover, the simulation results are in good agreement with the experimental data and show that the efficiency can be further improved by increasing the OD of the medium. Our work advances the technology in quantum information manipulation utilizing photons.

  6. Light Quark Mass Reweighting

    E-Print Network [OSTI]

    Qi Liu; Norman H. Christ; Chulwoo Jung

    2012-06-01

    We present a systematic study of the effectiveness of light quark mass reweighting. This method allows a single lattice QCD ensemble, generated with a specific value of the dynamical light quark mass, to be used to determine results for other, nearby light dynamical quark masses. We study two gauge field ensembles generated with 2+1 flavors of dynamical domain wall fermions with light quark masses m_l=0.02 (m_\\pi=620 MeV) and m_l=0.01 (m_\\pi=420 MeV). We reweight each ensemble to determine results which could be computed directly from the other and check the consistency of the reweighted results with the direct results. The large difference between the 0.02 and 0.01 light quark masses suggests that this is an aggressive application of reweighting as can be seen from fluctuations in the magnitude of the reweighting factor by four orders of magnitude. Never-the-less, a comparison of the reweighed topological charge, average plaquette, residual mass, pion mass, pion decay constant, and scalar correlator between these two ensembles shows agreement well described by the statistical errors. The issues of the effective number of configurations and finite sample size bias are discussed. An examination of the topological charge distribution implies that it is more favorable to reweight from heavier mass to lighter quark mass.

  7. Approved Module Information for EC214C, 2014/5 Module Title/Name: Health, Safety & Risk Module Code: EC214C

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Outcomes: * Intellecutal skills Assess the risks associated with workplaces, machinery, processes, and work the principles and application of health safety and risk management practices within the construction workApproved Module Information for EC214C, 2014/5 Module Title/Name: Health, Safety & Risk Module Code

  8. GE Topical Breadth Course Approval Description The U.C. Davis Requirements for Higher Degrees, Section 522, sets forth the Baccalaureate

    E-Print Network [OSTI]

    Islam, M. Saif

    and historical processes. 2. Science and Engineering. Courses in this area provide students with knowledge broad implications. Some courses with a heavy "applied" emphasis may not be given GE certification test questions, paper topics, etc.)? IV. Sample GE Justifications (These courses were approved before

  9. By-Law on ad hoc Consultation with MAUT [Approved April 16, 2015 Council Meeting] MAUT supports collegial governance and open communication and welcomes invitation from

    E-Print Network [OSTI]

    Shoubridge, Eric

    1 By-Law on ad hoc Consultation with MAUT [Approved April 16, 2015 Council Meeting] Preamble MAUT-Law concerns ad hoc requests for consultation with MAUT. It does not concern participation of MAUT governed by the MAUT Constitution and/or University Regulations. Principles and process An ad hoc

  10. Material system for tailorable white light emission and method for making thereof

    DOE Patents [OSTI]

    Smith, Christine A.; Lee, Howard W.

    2004-08-10

    A method of processing a composite material to tailor white light emission of the resulting composite during excitation. The composite material is irradiated with a predetermined power and for a predetermined time period to reduce the size of a plurality of nanocrystals and the number of a plurality of traps in the composite material. By this irradiation process, blue light contribution from the nanocrystals to the white light emission is intensified and red and green light contributions from the traps are decreased.

  11. Material system for tailorable white light emission and method for making thereof

    DOE Patents [OSTI]

    Smith, Christine A. (Livermore, CA); Lee, Howard W. H. (Fremont, CA)

    2009-05-19

    A method of processing a composite material to tailor white light emission of the resulting composite during excitation. The composite material is irradiated with a predetermined power and for a predetermined time period to reduce the size of a plurality of nanocrystals and the number of a plurality of traps in the composite material. By this irradiation process, blue light contribution from the nanocrystals to the white light emission is intensified and red and green light contributions from the traps are decreased.

  12. STAGES IN CURRICULUM REVIEW PROCESS (June 2009) New Program Proposals

    E-Print Network [OSTI]

    Salvaggio, Carl

    STAGES IN CURRICULUM REVIEW PROCESS (June 2009) · New Program Proposals · Substantially Revised obtain the approval of the appropriate Institute level curriculum review process and gain the endorsement apply to deans from colleges that provide support curriculum. A new program will not be submitted

  13. Catalytic cracking process

    SciTech Connect (OSTI)

    Lokhandwala, Kaaeid A.; Baker, Richard W.

    2001-01-01

    Processes and apparatus for providing improved catalytic cracking, specifically improved recovery of olefins, LPG or hydrogen from catalytic crackers. The improvement is achieved by passing part of the wet gas stream across membranes selective in favor of light hydrocarbons over hydrogen.

  14. Are Light Gluinos Dead?

    E-Print Network [OSTI]

    Glennys R. Farrar

    1997-07-25

    Not yet. ALEPH's recent exclusion limit employs an aggressive determination of theoretical uncertainties using a simplified application of the Bayesian method. The validity of their analysis can be evaluated by its further implications, such as contradicting the existence a b quark and requiring relations between hadronic event-shape observables which are not observed. Traditional error estimation methods result in a much larger estimate for the theoretical uncertainties. This puts the ALEPH and also Csikor-Fodor limits at the $\\sim 1~ \\sigma$ level for the very light gluino scenario. A recent astrophysical result implies direct searches will be more difficult than previously anticipated, adding to the importance of reducing the QCD uncertainty in predictions sensitive to indirect effects of light gluinos. Some possible indications in favor of a light gluino are noted.

  15. Light harvesting arrays

    DOE Patents [OSTI]

    Lindsey, Jonathan S. (Raleigh, NC)

    2002-01-01

    A light harvesting array useful for the manufacture of devices such as solar cells comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: X.sup.1.paren open-st.X.sup.m+1).sub.m (I) wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2, and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

  16. Sneaky light stop

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Eifert, Till; Nachman, Benjamin

    2015-02-20

    A light supersymmetric top quark partner (stop) with a mass nearly degenerate with that of the standard model (SM) top quark can evade direct searches. The precise measurement of SM top properties such as the cross-section has been suggested to give a handle for this ‘stealth stop’ scenario. We present an estimate of the potential impact a light stop may have on top quark mass measurements. The results indicate that certain light stop models may induce a bias of up to a few GeV, and that this effect can hide the shift in, and hence sensitivity from, cross-section measurements. Duemore »to the different initial states, the size of the bias is slightly different between the LHC and the Tevatron. The studies make some simplifying assumptions for the top quark measurement technique, and are based on truth-level samples.« less

  17. Light emitting ceramic device

    DOE Patents [OSTI]

    Valentine, Paul; Edwards, Doreen D.; Walker, Jr., William John; Slack, Lyle H.; Brown, Wayne Douglas; Osborne, Cathy; Norton, Michael; Begley, Richard

    2010-05-18

    A light-emitting ceramic based panel, hereafter termed "electroceramescent" panel, is herein claimed. The electroceramescent panel is formed on a substrate providing mechanical support as well as serving as the base electrode for the device. One or more semiconductive ceramic layers directly overlay the substrate, and electrical conductivity and ionic diffusion are controlled. Light emitting regions overlay the semiconductive ceramic layers, and said regions consist sequentially of a layer of a ceramic insulation layer and an electroluminescent layer, comprised of doped phosphors or the equivalent. One or more conductive top electrode layers having optically transmissive areas overlay the light emitting regions, and a multi-layered top barrier cover comprising one or more optically transmissive non-combustible insulation layers overlay said top electrode regions.

  18. NNSA approves LANL workforce reduction plan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on771/6/14 Contact: JanetSite |Customs | National

  19. Light is Heavy

    E-Print Network [OSTI]

    van der Mark, M B

    2015-01-01

    Einstein's relativity theory appears to be very accurate, but at times equally puzzling. On the one hand, electromagnetic radiation must have zero rest mass in order to propagate at the speed of light, but on the other hand, since it definitely carries momentum and energy, it has non-zero inertial mass. Hence, by the principle of equivalence, it must have non-zero gravitational mass, and so, light must be heavy. In this paper, no new results will be derived, but a possibly surprising perspective on the above paradox is given.

  20. Retino-hypothalamic regulation of light-induced murine sleep

    E-Print Network [OSTI]

    Muindi, Fanuel

    The temporal organization of sleep is regulated by an interaction between the circadian clock and homeostatic processes. Light indirectly modulates sleep through its ability to phase shift and entrain the circadian clock. ...

  1. Replacement of Lighting Fixtures with LED Energy Efficient Lights at the Parking Facility, Milwaukee, Wisconsin

    SciTech Connect (OSTI)

    David Brien

    2012-06-21

    The Forest County Potawatomi Community (FCPC or Tribe) owns a six-story parking facility adjacent to its Potawatomi Bingo Casino (the Casino) in Milwaukee, Wisconsin, as well as a valet parking facility under the Casino (collectively, the Parking Facility). The Parking Facility contained 205-watt metal halide-type lights that, for security reasons, operated 24 hours per day, 7 days per week. Starting on August 30, 2010, the Tribe replaced these fixtures with 1,760 state-of-the-art, energy efficient 55-Watt LED lights. This project resulted in an immediate average reduction in monthly peak demand of 238 kW over the fourth quarter of 2010. The average reduction in monthly peak demand from October 1 through December 31, 2010 translates into a forecast annual electrical energy reduction of approximately 1,995,000 kWh or 47.3% of the pre-project demand. This project was technically effective, economically feasible, and beneficial to the public not only in terms of long term energy efficiency and associated emissions reductions, but also in the short-term jobs provided for the S.E. Wisconsin region. The project was implemented, from approval by U.S. Department of Energy (DOE) to completion, in less than 6 months. The project utilized off-the-shelf proven technologies that were fabricated locally and installed by local trade contractors.

  2. Solid State Lighting

    SciTech Connect (OSTI)

    Hastbacka, Mildred; Dieckmann, John; Bouza, Antonio

    2013-03-30

    The article discusses solid state lighting technologies. This topic was covered in two previous ASHRAE Journal columns (2010). This article covers advancements in technologies and the associated efficacies. The life-cycle, energy savings and market potential of these technologies are addressed as well.

  3. DOE Approved Technical Standards | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    DOE, the performance of chemical process hazards analyses (PrHAs) as required under the PSM Rule. It provides basic information for the performance of PrHAs, and should not be...

  4. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Freezers, Lighting, Lighting ControlsSensors, Chillers, Heat Pumps, Air conditioners, Motor VFDs, Processing and Manufacturing Equipment, CustomOthers pending approval, Other EE...

  5. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Lighting, Lighting ControlsSensors, Furnaces, Boilers, Heat Pumps, Air conditioners, Motors, Motor VFDs, Processing and Manufacturing Equipment, CustomOthers pending approval,...

  6. Gas separation using ultrasound and light absorption

    DOE Patents [OSTI]

    Sinha, Dipen N. (Los Alamos, NM)

    2012-07-31

    An apparatus and method for separating a chosen gas from a mixture of gases having no moving parts and utilizing no chemical processing is described. The separation of particulates from fluid carriers thereof has been observed using ultrasound. In a similar manner, molecular species may be separated from carrier species. It is also known that light-induced drift may separate light-absorbing species from carrier species. Therefore, the combination of temporally pulsed absorption of light with ultrasonic concentration is expected to significantly increase the efficiency of separation by ultrasonic concentration alone. Additionally, breaking the spatial symmetry of a cylindrical acoustic concentrator decreases the spatial distribution of the concentrated particles, and increases the concentration efficiency.

  7. Cascading Quantum Light-Matter Interfaces

    E-Print Network [OSTI]

    Mehdi Namazi; Thomas Mittiga; Connor Kupchak; Eden Figueroa

    2015-03-10

    The ability to interface multiple optical quantum devices is a key milestone towards the development of future quantum networks that are capable of sharing and processing quantum information encoded in light. One of the requirements for any node of these quantum networks will be cascadability, i.e. the ability to drive the input of a node using the output of another node. Here, we report the cascading of quantum light-matter interfaces by storing few-photon level pulses of light in warm vapor followed by the subsequent storage of the retrieved field onto a second ensemble. We demonstrate that even after the sequential storage, the final signal-to-background ratio can remain greater than 1 for weak pulses containing 8 input photons on average.

  8. Process development status report for advanced manufacturing projects

    SciTech Connect (OSTI)

    Brinkman, J.R.; Homan, D.A.

    1990-03-30

    This is the final status report for the approved Advanced Manufacturing Projects for FY 1989. Five of the projects were begun in FY 1987, one in FY 1988, and one in FY 1989. The approved projects cover technology areas in welding, explosive material processing and evaluation, ion implantation, and automated manufacturing. It is expected that the successful completion of these projects well result in improved quality and/or reduced cost for components produced by Mound. Those projects not brought to completion will be continued under Process development in FY 1990.

  9. FDA Approves Drug for Type 2 Diabetes Invented with Aid of Protein...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FDA Approves Drug for Type 2 Diabetes Invented with Aid of Protein Structure Data Taken at ALS FDA Approves Drug for Type 2 Diabetes Invented with Aid of Protein Structure Data...

  10. School of Engineering Code Approved February 2, 2009 School of Engineering

    E-Print Network [OSTI]

    School of Engineering Code Approved February 2, 2009 Code of the School of Engineering University of Kansas Engineering Senate Revised May 29, 2009 #12;The School of Engineering Code Approved February 2 .......................................................................................................... 4 ARTICLE III THE ENGINEERING SENATE

  11. PUBLICATIONS -The Department of Public & Institute Relations shall approve, for substantive

    E-Print Network [OSTI]

    PUBLICATIONS Policy -The Department of Public & Institute Relations shall approve, for substantive exceptions: student publications approved by the Faculty Advisor; scholarly books and monographs; printed material used solely for instructional objectives; Alumni Association publications; program announcements

  12. UNIVERSITY OF ALBERTA Approved and accepted by Faculty of Science Council October 27, 2011

    E-Print Network [OSTI]

    Machel, Hans

    UNIVERSITY OF ALBERTA Approved and accepted by Faculty of Science Council October 27, 2011 in May, 2014) #12;UNIVERSITY OF ALBERTA Approved and accepted by Faculty of Science Council October 27

  13. MGSC 485 Business Process Management Fall 2007 BUSINESS PROCESS MANAGEMENT

    E-Print Network [OSTI]

    Almor, Amit

    organizational change initiatives such as TQM, Business Process Reengineering, and Six-Sigma campaigns discussions. Students will learn and practice principles and techniques/tools of Lean and Six-Sigma Approach to business process improvements. This is in light of the pervasive implementations of six-sigma campaigns

  14. Demonstration Assessment of Light-Emitting Diode Roadway Lighting...

    Office of Scientific and Technical Information (OSTI)

    New York Citation Details In-Document Search Title: Demonstration Assessment of Light-Emitting Diode Roadway Lighting on the FDR Drive in New York, New York This a report about a...

  15. Light Dance : light and the nature of body movement

    E-Print Network [OSTI]

    Riskin, Seth

    1989-01-01

    Light Dance is a conscious transfiguration of the body, its movement and the encompassing space; a transposition of matter to light exalted in the dance. This corresponds to the conceptualized spirit of the performer whose ...

  16. Making fuel from light: Argonne research sheds light on photosynthesis...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Making fuel from light: Argonne research sheds light on photosynthesis and creation of solar fuel By Jo Napolitano * September 1, 2015 Tweet EmailPrint Refined by nature over a...

  17. Fusion pumped light source

    DOE Patents [OSTI]

    Pappas, Daniel S. (Los Alamos, NM)

    1989-01-01

    Apparatus is provided for generating energy in the form of light radiation. A fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The neutron flux is coupled directly with the lasing medium. The lasing medium includes a first component selected from Group O of the periodic table of the elements and having a high inelastic scattering cross section. Gamma radiation from the inelastic scattering reactions interacts with the first component to excite the first component, which decays by photon emission at a first output wavelength. The first output wavelength may be shifted to a second output wavelength using a second liquid component responsive to the first output wavelength. The light outputs may be converted to a coherent laser output by incorporating conventional optics adjacent the laser medium.

  18. Scattering Of Light Nuclei

    SciTech Connect (OSTI)

    Quaglioni, S; Navratil, P; Roth, R

    2009-12-15

    The exact treatment of nuclei starting from the constituent nucleons and the fundamental interactions among them has been a long-standing goal in nuclear physics. Above all nuclear scattering and reactions, which require the solution of the many-body quantum-mechanical problem in the continuum, represent an extraordinary theoretical as well as computational challenge for ab initio approaches.We present a new ab initio many-body approach which derives from the combination of the ab initio no-core shell model with the resonating-group method [4]. By complementing a microscopic cluster technique with the use of realistic interactions, and a microscopic and consistent description of the nucleon clusters, this approach is capable of describing simultaneously both bound and scattering states in light nuclei. We will discuss applications to neutron and proton scattering on sand light p-shell nuclei using realistic nucleon-nucleon potentials, and outline the progress toward the treatment of more complex reactions.

  19. OLEDS FOR GENERAL LIGHTING

    SciTech Connect (OSTI)

    Anil Duggal; Don Foust; Chris Heller; Bill Nealon; Larry Turner; Joe Shiang; Nick Baynes; Tim Butler; Nalin Patel

    2004-02-29

    The goal of this program was to reduce the long term technical risks that were keeping the lighting industry from embracing and developing organic light-emitting diode (OLED) technology for general illumination. The specific goal was to develop OLEDs for lighting to the point where it was possible to demonstrate a large area white light panel with brightness and light quality comparable to a fluorescence source and with an efficacy comparable to that of an incandescent source. it was recognized that achieving this would require significant advances in three area: (1) the improvement of white light quality for illumination, (2) the improvement of OLED energy efficiency at high brightness, and (3) the development of cost-effective large area fabrication techniques. The program was organized such that, each year, a ''deliverable'' device would be fabricated which demonstrated progress in one or more of the three critical research areas. In the first year (2001), effort concentrated on developing an OLED capable of generating high illumination-quality white light. Ultimately, a down-conversion method where a blue OLED was coupled with various down-conversion layers was chosen. Various color and scattering models were developed to aid in material development and device optimization. The first year utilized this approach to deliver a 1 inch x 1 inch OLED with higher illumination-quality than available fluorescent sources. A picture of this device is shown and performance metrics are listed. To their knowledge, this was the first demonstration of true illumination-quality light from an OLED. During the second year, effort concentrated on developing a scalable approach to large area devices. A novel device architecture consisting of dividing the device area into smaller elements that are monolithically connected in series was developed. In the course of this development, it was realized that, in addition to being scalable, this approach made the device tolerant to the most common OLED defect--electrical shorts. This architecture enabled the fabrication of a 6 inch x 6 inch OLED deliverable for 2002. A picture of this deliverable is shown and the performance metrics are listed. At the time, this was the highest efficiency, highest lumen output illumination-quality OLED in existence. The third year effort concentrated on improving the fabrication yield of the 6 inch x 6 inch devices and improving the underlying blue device efficiency. An efficiency breakthrough was achieved through the invention of a new device structure such that now 15 lumen per watt devices could be fabricated. A 2 feet x 2 feet OLED panel consisting of sixteen 6 inch x 6 inch high efficiency devices tiled together was then fabricated. Pictures of this panel are shown with performance metrics listed. This panel met all project objectives and was the final deliverable for the project. It is now the highest efficiency, highest lumen output, illumination-quality OLED in existence.

  20. Solid State Lighting Reliability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo.Hydrogen4EnergySolid State Lighting Reliability 2014 Building

  1. Plasma-based EUV light source

    DOE Patents [OSTI]

    Shumlak, Uri (Seattle, WA); Golingo, Raymond (Seattle, WA); Nelson, Brian A. (Mountlake Terrace, WA)

    2010-11-02

    Various mechanisms are provided relating to plasma-based light source that may be used for lithography as well as other applications. For example, a device is disclosed for producing extreme ultraviolet (EUV) light based on a sheared plasma flow. The device can produce a plasma pinch that can last several orders of magnitude longer than what is typically sustained in a Z-pinch, thus enabling the device to provide more power output than what has been hitherto predicted in theory or attained in practice. Such power output may be used in a lithography system for manufacturing integrated circuits, enabling the use of EUV wavelengths on the order of about 13.5 nm. Lastly, the process of manufacturing such a plasma pinch is discussed, where the process includes providing a sheared flow of plasma in order to stabilize it for long periods of time.

  2. Title: SPONSORSHIP OR CE APPROVAL OF NON-SCHOOL OF NURSING CONTINUING EDUCATION OFFERING

    E-Print Network [OSTI]

    Chapman, Michael S.

    1 Title: SPONSORSHIP OR CE APPROVAL OF NON-SCHOOL OF NURSING CONTINUING EDUCATION OFFERING Index: School of Nursing sponsorship and/or approval of a continuing education offering given by individuals by approving offerings given by non-School of Nursing faculty. Implementing Procedures: Responsible Party

  3. Conduct of Human Subjects Research -1 -Approved: 02/05/2015 Conduct of Human Subjects Research

    E-Print Network [OSTI]

    Hammack, Richard

    Conduct of Human Subjects Research - 1 - Approved: 02/05/2015 Conduct of Human Subjects Research Policy Type: Administrative Responsible Office: Office of Research Subjects Protection Initial Policy Approved: 02/05/2015 Current Revision Approved: 02/05/2015 Policy Statement and Purpose Human subjects

  4. LED Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    are directional, focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and...

  5. An International Year of Light

    E-Print Network [OSTI]

    Faure, Claudie

    of light-based technologies for the equitable development of global society. The project received, renewable energy and energy efficiency, and for PROSPECTUS An International Year of Light Science ­ Technology ­ Nature ­ Culture ­ Development

  6. High Quantum Efficiency OLED Lighting Systems

    SciTech Connect (OSTI)

    Shiang, Joseph [General Electric (GE) Global Research, Fairfield, CT (United States)

    2011-09-30

    The overall goal of the program was to apply improvements in light outcoupling technology to a practical large area plastic luminaire, and thus enable the product vision of an extremely thin form factor high efficiency large area light source. The target substrate was plastic and the baseline device was operating at 35 LPW at the start of the program. The target LPW of the program was a >2x improvement in the LPW efficacy and the overall amount of light to be delivered was relatively high 900 lumens. Despite the extremely difficult challenges associated with scaling up a wet solution process on plastic substrates, the program was able to make substantial progress. A small molecule wet solution process was successfully implemented on plastic substrates with almost no loss in efficiency in transitioning from the laboratory scale glass to large area plastic substrates. By transitioning to a small molecule based process, the LPW entitlement increased from 35 LPW to 60 LPW. A further 10% improvement in outcoupling efficiency was demonstrated via the use of a highly reflecting cathode, which reduced absorptive loss in the OLED device. The calculated potential improvement in some cases is even larger, ~30%, and thus there is considerable room for optimism in improving the net light coupling efficacy, provided absorptive loss mechanisms are eliminated. Further improvements are possible if scattering schemes such as the silver nanowire based hard coat structure are fully developed. The wet coating processes were successfully scaled to large area plastic substrate and resulted in the construction of a 900 lumens luminaire device.

  7. Approved by CAST Council CAST Learning Technology Advisory Committee

    E-Print Network [OSTI]

    Branoff, Theodore J.

    Approved by CAST Council 12/3/04 CAST Learning Technology Advisory Committee Provost John Presley and security matters. Other probable functions that may be the purview of a CAST Technology Committee would be to advise the Dean on long term planning for technology; periodically review and suggest revisions to CAST

  8. UW Graduate School Master's Supervisory Committee Approval Form

    E-Print Network [OSTI]

    Wang, Edith

    : Program: Student Agreement I certify that I have presented my master's supervisory committee's Supervisory Committee Agreement I certify that I have examined the final copy of the above student's masterUW Graduate School Master's Supervisory Committee Approval Form Student Instructions o Complete

  9. SAFARI 2000 DATA POLICY Approved February 5, 2001

    E-Print Network [OSTI]

    SAFARI 2000 DATA POLICY Approved February 5, 2001 SAFARI 2000 OPEN DATA POLICY The SAFARI 2000 data investigators. Two sources formed the basis for the SAFARI 2000 data policy: ·= The International Council 2000 Science Steering Committee. ARCHIVE SAFARI 2000 will establish a Southern African Regional Data

  10. GRADUATE CURRICULUM APPROVED 2005-2006 September 20, 2005

    E-Print Network [OSTI]

    Barrash, Warren

    GRADUATE CURRICULUM APPROVED 2005-2006 September 20, 2005 2. For students accepted into the MPA) from the State of Idaho. 3. Proposal from the Department of Curriculum, Instruction, and Foundational Mathematical Modeling for Teachers 2. Proposal from the Department of Curriculum, Instruction, and Foundational

  11. Approved Summer 2013 (beige sheet) Environmental Studies Major

    E-Print Network [OSTI]

    Bermingham, Laura Hill

    Governance POLS 259 Earth Systems Governance (*) POLS 279 Comparative Environmental Policy (*) Social Systems 230 Ecotourism History / Ethics ENVS 166 Env History of North America ENVS 167 Global EnvironmentalApproved Summer 2013 (beige sheet) Environmental Studies Major Environmental Policy and Development

  12. DESIGN OF MULTICAST SWITCHES FOR SANS APPROVED BY SUPERVISING COMMITTEE

    E-Print Network [OSTI]

    Boppana, Rajendra V.

    DESIGN OF MULTICAST SWITCHES FOR SANS APPROVED BY SUPERVISING COMMITTEE: Dr. Rajendra V. Boppana OF MULTICAST SWITCHES FOR SANS by RAJESH BOPPANA, B.Tech THESIS Presented to the Graduate Faculty at all the times. May 2003 iii #12;DESIGN OF MULTICAST SWITCHES FOR SANS Rajesh Boppana, M

  13. Research Ethics Committees: Policy and Procedures for Research Ethical Approval

    E-Print Network [OSTI]

    Aickelin, Uwe

    Research Ethics Committees: Policy and Procedures for Research Ethical Approval Contents Page INTRODUCTION PROCEDURES 1 Establishment of Research Ethics Committees 3 2 Responsibilities of the University Research Ethics Committee 3 3 Terms of Reference of Faculty Research Ethics Committees 4 4 Responsibilities

  14. DOE O 413.1 Approved: 12-6-95

    E-Print Network [OSTI]

    DOE O 413.1 Approved: 12-6-95 Sunset Review: 12-6-97 Expires: 12-6-99 SUBJECT: MANAGEMENT CONTROL. The Order listed below is cancelled. Cancellation of an order does not, by itself, modify or otherwise to the requirements in the cancelled orders. DOE 1000.3C, MANAGEMENT CONTROL SYSTEMS MANUAL, of 7-10-92 3

  15. Cost Sharing -1 -Approved: 01/07/2013 Cost Sharing

    E-Print Network [OSTI]

    Hammack, Richard

    Cost Sharing - 1 - Approved: 01/07/2013 Cost Sharing Policy Type: Administrative Responsible Office and Purpose The purpose of this policy is to define VCU's cost-sharing policy for sponsored programs. The university will make a cost-sharing commitment only when required by the sponsor or by the competitive nature

  16. Facility Approvals, Security Surveys, and Nuclear Materials Surveys

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1988-02-03

    To establish the Department of Energy (DOE) requirements for granting facility approvals prior to permitting safeguards and security interests on the premises and the conduct of on-site security and/or nuclear material surveys of facilities with safeguards and security interests. Cancels DOE O 5630.7 and DOE O 5634.1. Canceled by DOE 5634.1B.

  17. Facility Approvals, Security Surveys, and Nuclear Materials Surveys

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1992-09-15

    To establish Department of Energy (DOE) requirements for granting facility approvals prior to permitting safeguards and security interests on the premises and the conduct of insite security and/or nuclear material surveys of facilities with safeguards and security interests. Cancels DOE 5634.1A. Canceled by DOE O 470.1 dated 9-28-95.

  18. Public Issues Council (PIC) Approved Meeting Minutes, October 1, 2012

    E-Print Network [OSTI]

    Oliver, Douglas L.

    Public Issues Council (PIC) Approved Meeting Minutes, October 1, 2012 Members Present: Joanne Kuntz Care, SOM & PIC Administrative Ex-Officio Ann Ferris, PhD, Director, UConn Center for Public Health, Director, Student Continuity Practice, UConn School of Medicine Douglas Oliver, PhD, Chair, PIC

  19. LABORATORY ROTATION REGISTRATION FORM Part III: ACKNOWLEDGED APPROVED BY

    E-Print Network [OSTI]

    Emmons, Scott

    LABORATORY ROTATION REGISTRATION FORM Part III: ACKNOWLEDGED APPROVED BY Part II: ROTATION LABORATORY INFORMATION Instructions to the student: This form must be submitted with a completed OSHA Form). The Associate Dean's signature will be obtained by the Graduate Office. First Laboratory Rotation Period

  20. Salary Supplement -1 -Approved: 04/10/2014 Salary Supplement

    E-Print Network [OSTI]

    Hammack, Richard

    Salary Supplement - 1 - Approved: 04/10/2014 Salary Supplement Policy Type: Administrative salaries to all employees within state and university guidelines. Therefore, supplementing an employee's salary with state, local or grant funding in excess of prescribed rates is a serious matter

  1. Reviews and approves OG protocol Publishes New protocols, Revisions,

    E-Print Network [OSTI]

    Kay, Mark A.

    CIRB reviews/approves Study-Specific Worksheet; notifies researcher & local IRB of acceptance Confirms- Specific Worksheet Worksheet Acceptance (site accepted) New protocols Revisions Renewals DSMB rpts Local local site closure to Researcher and to local IRB Oncology Group (OG) Scientific review at CTEP takes

  2. APPROVAL SHEET Title of Thesis: EXTENSIBLE DYNAMIC FORM FOR SUPPLIER

    E-Print Network [OSTI]

    Peng, Yun

    #12;APPROVAL SHEET Title of Thesis: EXTENSIBLE DYNAMIC FORM FOR SUPPLIER DISCOVERY Name;ABSTRACT Title of Thesis: EXTENSIBLE DYNAMIC FORM FOR SUPPLIER DISCOVERY Yan Kang, Master of Science and Electrical Engineering Discovery of suppliers (supplier discovery) is essential for building a flexible

  3. Photodetector with enhanced light absorption

    DOE Patents [OSTI]

    Kane, James (Lawrenceville, NJ)

    1985-01-01

    A photodetector including a light transmissive electrically conducting layer having a textured surface with a semiconductor body thereon. This layer traps incident light thereby enhancing the absorption of light by the semiconductor body. A photodetector comprising a textured light transmissive electrically conducting layer of SnO.sub.2 and a body of hydrogenated amorphous silicon has a conversion efficiency about fifty percent greater than that of comparative cells. The invention also includes a method of fabricating the photodetector of the invention.

  4. Webinar: Fuel Cell Mobile Lighting

    Broader source: Energy.gov [DOE]

    Video recording of the Fuel Cell Technologies Office webinar, Fuel Cell Mobile Lighting, originally presented on November 13, 2012.

  5. Faster than Light Quantum Communication

    E-Print Network [OSTI]

    A. Y. Shiekh

    2008-04-05

    Faster than light communication might be possible using the collapse of the quantum wave-function without any accompanying paradoxes.

  6. Bolometric Light Curves of Type Ia Supernovae G. Contardo 1;2 , B. Leibundgut 1

    E-Print Network [OSTI]

    Leibundgut, Bruno

    Bolometric Light Curves of Type Ia Supernovae G. Contardo 1;2 , B. Leibundgut 1 1 European Southern, Karl­Schwarzschild­Straße 1, D­85748 Garch­ ing, Germany 1.1 Light Curves of Type Ia Supernovae Substantial information about the processes in supernovae is contained in their light curves. They track

  7. Lighting and Dark Sky Regulations

    E-Print Network [OSTI]

    Radcliffe, David

    Lighting and Dark Sky Regulations Marjorie Palmer Spring 2008 #12;The UGA Land Use Clinic provides Road, Room 101 Athens, GA 30602-1510 (706) 583-0373 · Fax (706) 583-0612 jroskie@uga.edu #12;Lighting......................................................................................................................................1 II. Approaches to Lighting Regulation

  8. Sustainable LED Fluorescent Light Replacement Technology

    SciTech Connect (OSTI)

    2011-06-30

    Ilumisys and the National Center for Manufacturing Sciences (NCMS) partnered on a three-year project awarded by the United States (U.S.) Department of Energy (DOE), to quantify the impacts of LED lamps, incandescent lamps and fluorescent benchmark lamps over a product lifecycle – i.e. to develop a sustainable design and manufacturing strategy that addresses product manufacturing, use, recycling and disposal scenarios for LED-based lighting. Based on the knowledge gained from extensive product tear-down studies of fluorescent and screw-in lighting products, lifecycle assessment tools, and accelerated lifecycle testing protocols, an interactive Sustainable LED Design Guide has been developed to aid architectural and lighting designers and engineers in making design decisions that consider three important environmental impacts (greenhouse gas emissions, energy use and mercury emission) across all phases of the life of an LED lighting product. Critical information developed for the lifecycle analysis and product feature comparisons is the useful life of the lighting product as well as its performance. The Design Guide is available at www.ncms.org, and was developed based on operational and durability testing of a variety of lighting products including power consumption, light output, and useful life of a lamp in order to allow a more realistic comparison of lamp designs. This report describes the main project tasks, results and innovative features of the lifecycle assessment (LCA)-based design tools, and the key considerations driving the sustainable design of LED lighting systems. The Design Guide incorporates the following three novel features for efficiently evaluating LED lighting features in value-chains: • Bill-of-Materials (BOM) Builder – Designers may import process data for each component and supply functional data for the product, including power, consumption, lumen output and expected useful life. • Environmental Impact Review – Designs are comparable across lifecycle phases, subsystems, and environmental impact category, and can be normalized to a userdefined functional unit. • Drill-down Review – These provide an indepth look at individual lamp designs with the ability to review across subsystem or lifecycle phase.

  9. Radiation, Matter and Energy What is light?

    E-Print Network [OSTI]

    Shirley, Yancy

    Radiation, Matter and Energy #12;What is light? #12;Light is an electromagnetic wave #12;Light is an electromagnetic wave #12;#12;Light is also a particle Photons: "pieces" of light, each with precise wavelength the visible spectrum, blue light has higher energy than red light Within the electromagnetic spectrum, X

  10. Light Board Operation 208 Jordan Hall

    E-Print Network [OSTI]

    Buechler, Steven

    Light Board Operation 208 Jordan Hall Using the Light Board 1. Turn on the lights next to the entry door. 2. Turn on the Light Board lights (illustration 1). The light switch is on the west wall, slightly behind the computer cart's display. 3. Locate the lapel microphone (usually on top of the Light

  11. Pedestrian Friendly Outdoor Lighting

    SciTech Connect (OSTI)

    Miller, Naomi J.; Koltai, Rita; McGowan, Terry

    2013-12-31

    This GATEWAY report discusses the problems of pedestrian lighting that occur with all technologies with a focus on the unique optical options and opportunities offered by LEDs through the findings from two pedestrian-focused projects, one at Stanford University in California, and one at the Chautauqua Institution in upstate New York. Incorporating user feedback this report reviews the tradeoffs that must be weighed among visual comfort, color, visibility, efficacy and other factors to stimulate discussion among specifiers, users, energy specialists, and in industry in hopes that new approaches, metrics, and standards can be developed to support pedestrian-focused communities, while reducing energy use.

  12. National Lighting Energy Consumption

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool Fits the BillDepartmentSites KDFNational Fuel Cell andEnergy NationalLighting

  13. Extragalactic Background Light

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield MunicipalTechnical Report:Speeding accessby aLED Street Lighting HostDISCLAIMERlinacSYNCHROTRON

  14. Lighting Market Characterization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and-E C H2015 Non-Residential Lighting Market

  15. Lighting Test Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and-E C H2015 Non-Residential Lighting

  16. Lighting in the Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and-E C H2015 Non-Residential LightingThe

  17. Gross error detection in process data 

    E-Print Network [OSTI]

    Singh, Gurmeet

    1992-01-01

    , 1991), with many optimum properties, seems to have been untapped by chemical engineers. We first review the background of the Tr test, and present relevant properties of the test. IV. A Hotelling's Generalization of Students t Test One of the most...: Chemical Engineering GROSS ERROR DETECTION IN PROCESS DATA A Thesis by GURMEET SINGH Approved as to style and content by: Ralph E. White (Chair of Committee) Michael Nikoloau (Member Richard B. Gri n (Member) R. W. Flummerfelt (Head...

  18. Folded-Light-Path Colloidal Quantum Dot Solar Cells

    E-Print Network [OSTI]

    Sargent, Edward H. "Ted"

    Folded-Light-Path Colloidal Quantum Dot Solar Cells Ghada I. Koleilat*, Illan J. Kramer*, Chris T-processed solar cells offer the promise of low cost, large-area processing, and, prospectively, high solar power solar cell performance20,21 . Results In the present work, we sought to increase the interaction

  19. Lighting Principles and Terms | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Light quantity, energy consumption, and light quality are the basic principles of lighting. | Photo courtesy of

  20. Embodied Energy and Off-Grid Lighting

    E-Print Network [OSTI]

    Alstone, Peter

    2012-01-01

    Self-reported Impacts of LED Lighting Technology Compared to2011. Adoption of LED Lighting by Night Market Vendors inbased to rechargeable LED lighting. However, as with most

  1. Types of Lighting | Department of Energy

    Energy Savers [EERE]

    For a technical comparison of the different types of lighting, visit Energy Basics. External Resources Find a Lighting Designer - International Association of Lighting...

  2. Demand Responsive Lighting: A Scoping Study

    E-Print Network [OSTI]

    Rubinstein, Francis; Kiliccote, Sila

    2007-01-01

    3 3.0 Previous Experience with Demand Responsive Lighting11 4.3. Prevalence of Lighting13 4.4. Impact of Title 24 on Lighting

  3. Ecological Consequences of Artificial Night Lighting

    E-Print Network [OSTI]

    Piselli, Kathy

    2006-01-01

    of Artificial Night Lighting Catherine Rich and Travisof artificial night lighting. This book provides editedage of modern urban lighting was ushered in. Coincidentally,

  4. LIGHTING CONTROLS: SURVEY OF MARKET POTENTIAL

    E-Print Network [OSTI]

    Verderber, R.R.

    2010-01-01

    REFERENCES Task Report to Lighting Systems Research,Berkeley Laboratory, "Lighting Control System Market1980). Task Report to Lighting Systems Research, Lawrence

  5. LED Outdoor Area Lighting Fact Sheet

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Outdoor Area Lighting LED technology is rapidly becoming competitive with high-intensity discharge light sources for outdoor area lighting. This document reviews the major design...

  6. Controls for Solid-State Lighting

    E-Print Network [OSTI]

    Rubinstein, Francis

    2007-01-01

    of controlling LED lighting using the DALI protocol. Figurewith dimming white LED lighting depending on whether the LEDthe promising hybrid LED lighting systems are: 1. LED Hybrid

  7. Measuring Light Reflectance of BGO Crystal Surfaces

    E-Print Network [OSTI]

    Janecek, Martin

    2009-01-01

    Carlo program simulating light propagation in isotropic orTerms—Lambertian reflection, light collection, Monte Carloy-axis) and fraction specular light (right y- axis) for a

  8. Light propagation and Imaging in Indefinite Metamaterials

    E-Print Network [OSTI]

    Yao, Jie

    2010-01-01

    photolithography by polarized light,” Applied PhysicsZhang, “Imaging visible light using anisotropic metamaterialcross-sectional review of the light propagation of TE mode (

  9. WASTE PROCESSING ANNUAL NUCLEAR SAFETY RELATED R AND D REPORT FOR CY2008

    SciTech Connect (OSTI)

    Fellinger, A.

    2009-10-15

    The Engineering and Technology Office of Waste Processing identifies and reduces engineering and technical risks associated with key waste processing project decisions. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment (TDD). The Office of Waste Processing TDD program prioritizes and approves research and development scopes of work that address nuclear safety related to processing of highly radioactive nuclear wastes. Thirteen of the thirty-five R&D approved work scopes in FY2009 relate directly to nuclear safety, and are presented in this report.

  10. Directory of certificiates of compliance for radioactive materials packages: Report of NRC approved packages. Revision 19, Volume 1

    SciTech Connect (OSTI)

    1996-10-01

    This directory provides information on packagings approved by the U.S. Nuclear Regulatory Commission.

  11. Memorandum, Approval of a Permanent Variance Regarding Static Magnetic Fields at Brookhaven National Laboratory (Variance 102 1)

    Broader source: Energy.gov [DOE]

    Approval of a Permanenet Variance Regarding Static Magnetic Fields at Brookhaven National Laboratory (Variance 1021)

  12. Alight a beam and beaming light: A theme with variations

    SciTech Connect (OSTI)

    Chattopadhyay, S. [Ernest Orlando Lawrence Berkeley National Laboratory, University of California, Berkeley, California94720 (United States)] [Ernest Orlando Lawrence Berkeley National Laboratory, University of California, Berkeley, California94720 (United States)

    1998-05-01

    The interaction of light (coherent and incoherent) with charged particle beams is explored in various configurations: incoherent scattering of coherent light (laser) from an incoherent particle beam (high temperature), coherent scattering of coherent light (laser) from a {open_quotes}cold{close_quotes} (bunched) beam, femtosecond generation of particle and light beams via {open_quotes}optical slicing{close_quotes} and Thomson/Compton scattering techniques, etc. The domains of ultrashort temporal duration (femtoseconds) as well as ultrashort wavelengths (x rays and shorter), with varying degrees of coherence, are explored. The relevance to a few critical areas of research in the natural sciences, e.g., ultrafast material, chemical and biological processes, protein folding, particle phase space cooling, etc. are touched upon. All the processes discussed involve proper interpretation and understanding of coherent states of matter and radiation, as well as the quality and quantity of information and energy embedded in them. {copyright} {ital 1998 American Institute of Physics.}

  13. Modulating light with light via giant nano-opto-mechanical nonlinearity of plasmonic metamaterial

    E-Print Network [OSTI]

    Ou, Jun-Yu; Zhang, Jianfa; Zheludev, Nikolay I

    2015-01-01

    From the demonstration of saturable absorption by Vavilow and Levshin in 1926, and with invention of the laser, unavailability of strongly nonlinear materials was a key obstacle for developing optical signal processing, in particular in transparent telecommunication networks. Today, most advanced photonic switching materials exploit gain dynamics and near-band and excitonic effects in semiconductors, nonlinearities in organic media with weakly-localized electrons and nonlinearities enhanced by hybridization with metamaterials. Here we report on a new type of artificial nonlinearity that is nano-opto-mechanical in nature. It was observed in an artificial metamaterial array of plasmonic meta-molecules supported by a flexible nano-membrane. Here nonlinearity is underpinned by the reversible reconfiguration of its structure induced by light. In a film of only 100 nanometres thickness we demonstrated modulation of light with light using milliwatt power telecom diode lasers.

  14. ADMIN SYSTEMS OUTAGE NOTIFICATION PROCESS (2/13/07 Marcia)

    E-Print Network [OSTI]

    Kunkle, Tom

    l .(, '- ADMIN SYSTEMS OUTAGE NOTIFICATION PROCESS (2/13/07 Marcia) STANDARD OUTAGE TIMES (NO of month rd ADMIN SERVERS (Wando/Cooper): Midnight - 8PM Sunday of month SCHEDULED OUTAGES DURING NON-STANDARD OUTAGE TIMES: Requestor sends outage request to "ITOutageRequest" for approval at least 5 business days

  15. Energy Savings Estimates of Light Emitting Diodes in Niche Lighting...

    Broader source: Energy.gov (indexed) [DOE]

    in Niche Lighting Applications Prepared for: Building Technologies Program Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Prepared by: Navigant...

  16. Advanced Light Extraction Material for OLED Lighting | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Extraction Material for OLED Lighting Lead Performer: Pixelligent Technologies LLC - Baltimore, MD Partners: OLEDWorks LLC DOE Total Funding: 1,000,000 Project Term: April 6,...

  17. Solar optics: light as energy; energy as light

    SciTech Connect (OSTI)

    Bennett, D.J.; Eijadi, D.A.

    1980-05-01

    a prominent characteristic of earth-sheltered and underground buildings, as well as buildings designed to accommodate more uses within the same perimeters, is the prominence of interior space without direct access to natural light and view opportunities. Solar Optics, a technique for illuminating interior spaces with natural light, offers a way to satisfy the well-documented human affinity for natural light. The system, which uses a heliostat to track the sun and lenses and mirrors to direct the light to remote interior spaces, is more efficient than converting solar radiation into electricity. Through the use of cold mirrors, it is also possible to separate the infrared portion of the spectrum from visible light, thereby creating a cool light source that can reduce a building's space cooling demand. Solar Optics also offers energy savings by transmitting light through a small aperture, as opposed to a large window. Several design problems must still be addressed. The system will be demonstrated in a new building at the University of Minnesota. Because this is a limited demonstration, it does not include the integration of a natural light system with a central source light system...another promising application of Solar Optics.

  18. LIGHTING CONTROLS: SURVEY OF MARKET POTENTIAL

    E-Print Network [OSTI]

    Verderber, R.R.

    2010-01-01

    Floors Floor Area Lighting Power Density Light Output Lampenergy den- sity and power density for lighting to 3.5 kWh/Lighting Level (Lumens/Watt) (Footcandles) Power Density (

  19. Sandia Energy - Lighting Developments to 2030

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lighting Developments to 2030 Home Energy Research EFRCs Solid-State Lighting Science EFRC Lighting Developments to 2030 Lighting Developments to 2030Tara Camacho-Lopez2015-05-14T1...

  20. Tips: Shopping for Lighting | Department of Energy

    Energy Savers [EERE]

    Lighting Tips: Shopping for Lighting July 17, 2014 - 7:27pm Addthis With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. |...

  1. Analysis of light transport in scattering media

    E-Print Network [OSTI]

    Mukaigawa, Yasuhiro

    We propose a new method to analyze light transport in homogeneous scattering media. The incident light undergoes multiple bounces in translucent objects, and produces a complex light field. Our method analyzes the light ...

  2. Light Meson Distribution Amplitudes

    E-Print Network [OSTI]

    R. Arthur; P. A. Boyle; D. Brömmel; M. A. Donnellan; J. M. Flynn; A. Jüttner; H. Pedroso de Lima; T. D. Rae; C. T. Sachrajda; B. Samways

    2010-11-12

    We calculated the first two moments of the light-cone distribution amplitudes for the pseudoscalar mesons ($\\pi$ and $K$) and the longitudinally polarised vector mesons ($\\rho$, $K^*$ and $\\phi$) as part of the UKQCD and RBC collaborations' $N_f=2+1$ domain-wall fermion phenomenology programme. These quantities were obtained with a good precision and, in particular, the expected effects of $SU(3)$-flavour symmetry breaking were observed. Operators were renormalised non-perturbatively and extrapolations to the physical point were made, guided by leading order chiral perturbation theory. The main results presented are for two volumes, $16^3\\times 32$ and $24^3\\times 64$, with a common lattice spacing. Preliminary results for a lattice with a finer lattice spacing, $32^3\\times64$, are discussed and a first look is taken at the use of twisted boundary conditions to extract distribution amplitudes.

  3. Gain-assisted superluminal light propagation via incoherent pump field

    E-Print Network [OSTI]

    M. Mahmoudi; S. Worya Rabiei; L. Safari; M. Sahrai

    2008-08-03

    We investigate the dispersion and the absorption properties of a weak probe field in a three-level Lambda-type atomic system. We use just an incoherent field for controlling the group velocity of light. It is shown that the slope of dispersion changes from positive to negative just with changing the intensity of the indirect incoherent pumping field. Gain-assisted superluminal light propagation appears in this system. No laser field is used in the pumping processes.

  4. Grazers, producer stoichiometry, and the light?: nutrient hypothesis revisited.

    E-Print Network [OSTI]

    Hall, Spencer R.; Leibold, Mathew A.; Lytle, David A.; Smith, Val H.

    2007-01-01

    ; nitrogen : phosphorus supply; ponds. INTRODUCTION Primary productivity in aquatic ecosystems depends critically both upon light availability and upon the supplies of nutrients such as nitrogen and phosphorus (Smith 1979). These key resources govern... govern fundamental processes in ecosystems, such as the transfer and allocation of energy and nutrients among trophic levels (Andersen 1997, Sterner et al. 1997, 1998, Sterner and Elser 2002). Most discussions of the light : nutrient hypothesis to date...

  5. Process for light-driven hydrocarbon oxidation at ambient temperatures

    DOE Patents [OSTI]

    Shelnutt, John A. (Tijeras, NM)

    1990-01-01

    A photochemical reaction for the oxidation of hydrocarbons uses molecular oxygen as the oxidant. A reductive photoredox cycle that uses a tin(IV)- or antimony(V)-porphyrin photosensitizer generates the reducing equivalents required to activate oxygen. This artificial photosynthesis system drives a catalytic cycle, which mimics the cytochrome P.sub.450 reaction, to oxidize hydrocarbons. An iron(III)- or manganese(III)-porphyrin is used as the hydrocarbon-oxidation catalyst. Methylviologen can be used as a redox relay molecule to provide for electron-transfer from the reduced photosensitizer to the Fe or Mn porphyrin. The system is long-lived and may be used in photo-initiated spectroscopic studies of the reaction to determine reaction rates and intermediates.

  6. Microphotonic parabolic light directors fabricated by two-photon lithography

    SciTech Connect (OSTI)

    Atwater, Jackson H; Spinelli, P.; Kosten, Emily D; Parsons, J.; Van Lare, C; Van de Groep, J; Garcia de Abajo, J.; Polman, Albert; Atwater, Harry A.

    2011-01-01

    We have fabricated microphotonic parabolic light directors using two-photon lithography, thin-film processing, and aperture formation by focused ion beam lithography. Optical transmission measurements through upright parabolic directors 22 ?m high and 10 ?m in diameter exhibit strong beam directivity with a beam divergence of 5.6°, in reasonable agreement with ray-tracing and full-field electromagnetic simulations. The results indicate the suitability of microphotonic parabolic light directors for producing collimated beams for applications in advanced solar cell and light-emitting diode designs.

  7. Northeast Energy Efficiency Partnerships: Advanced Lighting Controls...

    Energy Savers [EERE]

    Northeast Energy Efficiency Partnerships: Advanced Lighting Controls Northeast Energy Efficiency Partnerships: Advanced Lighting Controls Credit: Northeast Energy Efficiency...

  8. 2014 Solid-State Lighting Project Portfolio

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    White LED Light Engines ... A-23 Phosphor Systems for Illumination Quality Solid State Lighting Products ... A-24...

  9. Rotary mode core sampling approved checklist: 241-TX-113

    SciTech Connect (OSTI)

    Fowler, K.D.

    1998-08-03

    The safety assessment for rotary mode core sampling was developed using certain bounding assumptions, however, those assumptions were not verified for each of the existing or potential flammable gas tanks. Therefore, a Flammable Gas/Rotary Mode Core Sampling Approved Checklist has been completed for tank 241-TX-113 prior to sampling operations. This transmittal documents the dispositions of the checklist items from the safety assessment.

  10. Rotary mode core sampling approved checklist: 241-TX-116

    SciTech Connect (OSTI)

    FOWLER, K.D.

    1999-02-24

    The safety assessment for rotary mode core sampling was developed using certain bounding assumptions, however, those assumptions were not verified for each of the existing or potential flammable gas tanks. Therefore, a Flammable Gas/Rotary Mode Core Sampling Approved Checklist has been completed for tank 241-TX-116 prior to sampling operations. This transmittal documents the dispositions of the checklist items from the safety assessment.

  11. Automatic Mechetronic Wheel Light Device

    DOE Patents [OSTI]

    Khan, Mohammed John Fitzgerald (Silver Spring, MD)

    2004-09-14

    A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

  12. High Efficiency, Illumination Quality OLEDs for Lighting

    SciTech Connect (OSTI)

    Joseph Shiang; James Cella; Kelly Chichak; Anil Duggal; Kevin Janora; Chris Heller; Gautam Parthasarathy; Jeffery Youmans; Joseph Shiang

    2008-03-31

    The goal of the program was to demonstrate a 45 lumen per watt white light device based upon the use of multiple emission colors through the use of solution processing. This performance level is a dramatic extension of the team's previous 15 LPW large area illumination device. The fundamental material system was based upon commercial polymer materials. The team was largely able to achieve these goals, and was able to deliver to DOE a 90 lumen illumination source that had an average performance of 34 LPW a 1000 cd/m{sup 2} with peak performances near 40LPW. The average color temperature is 3200K and the calculated CRI 85. The device operated at a brightness of approximately 1000cd/m{sup 2}. The use of multiple emission colors particularly red and blue, provided additional degrees of design flexibility in achieving white light, but also required the use of a multilayered structure to separate the different recombination zones and prevent interconversion of blue emission to red emission. The use of commercial materials had the advantage that improvements by the chemical manufacturers in charge transport efficiency, operating life and material purity could be rapidly incorporated without the expenditure of additional effort. The program was designed to take maximum advantage of the known characteristics of these material and proceeded in seven steps. (1) Identify the most promising materials, (2) assemble them into multi-layer structures to control excitation and transport within the OLED, (3) identify materials development needs that would optimize performance within multilayer structures, (4) build a prototype that demonstrates the potential entitlement of the novel multilayer OLED architecture (5) integrate all of the developments to find the single best materials set to implement the novel multilayer architecture, (6) further optimize the best materials set, (7) make a large area high illumination quality white OLED. A photo of the final deliverable is shown. In 2003, a large area, OLED based illumination source was demonstrated that could provide light with a quality, quantity, and efficiency on par with what can be achieved with traditional light sources. The demonstration source was made by tiling together 16 separate 6-inch x 6-inch blue-emitting OLEDs. The efficiency, total lumen output, and lifetime of the OLED based illumination source were the same as what would be achieved with an 80 watt incandescent bulb. The devices had an average efficacy of 15 LPW and used solution-processed OLEDs. The individual 6-inch x 6-inch devices incorporated three technology strategies developed specifically for OLED lighting -- downconversion for white light generation, scattering for outcoupling efficiency enhancement, and a scalable monolithic series architecture to enable large area devices. The downconversion approach consists of optically coupling a blue-emitting OLED to a set of luminescent layers. The layers are chosen to absorb the blue OLED emission and then luminescence with high efficiency at longer wavelengths. The composition and number of layers are chosen so that the unabsorbed blue emission and the longer wavelength re-emission combine to make white light. A downconversion approach has the advantage of allowing a wide variety of colors to be made from a limited set of blue emitters. In addition, one does not have to carefully tune the emission wavelength of the individual electro-luminescent species within the OLED device in order to achieve white light. The downconversion architecture used to develop the 15LPW large area light source consisted of a polymer-based blue-emitting OLED and three downconversion layers. Two of the layers utilized perylene based dyes from BASF AG of Germany with high quantum efficiency (>98%) and one of the layers consisted of inorganic phosphor particles (Y(Gd)AG:Ce) with a quantum efficiency of {approx}85%. By independently varying the optical density of the downconversion layers, the overall emission spectrum could be adjusted to maximize performance for lighting (e.g. blackbody temp

  13. Light-Like Noncommutativity, Light-Front Quantization and New Light on UV/IR Mixing

    E-Print Network [OSTI]

    M. M. Sheikh-Jabbari; A. Tureanu

    2010-10-02

    We revisit the problem of quantizing field theories on noncommutative Moyal spacetime with \\emph{light-like} noncommutativity. To tackle the issues arising from noncommuting and hence nonlocal time, we argue that for this case light-front quantization procedure should be employed. In this appropriate quantization scheme we perform the non-planar loop analysis for the light-like noncommutative field theories. One of the important and peculiar features of light-front quantization is that the UV cutoff of the light-cone Hamiltonian manifests itself as an IR cutoff for the light-cone momentum, $p^+$. Due to this feature, the naive results of covariant quantization for the light-like case allude to the absence of the UV/IR mixing in the light-front quantization. However, by a careful analysis of non-planar loop integrals we show that this is not the case and the UV/IR mixing persists. In addition, we argue in favour of the perturbative unitarity of light-like noncommutative field theories in the light-front quantization scheme.

  14. Status of Light Gaugino Scenarios

    E-Print Network [OSTI]

    Glennys R. Farrar

    1997-10-08

    I summarize recent devlopments in supersymmetry scenarios which leave some or all gauginos light. The emphasis is on experimental and phenomenological progress in the past year.

  15. Fluorescent Lighting | Department of Energy

    Office of Environmental Management (EM)

    - by far the most common form of fluorescent lighting but rarely found in residential buildings -- are much more energy efficient than incandescent lamps and are ideally suited...

  16. Incandescent Lighting | Department of Energy

    Office of Environmental Management (EM)

    courtesy of iStockphotoTokenPhoto. Incandescent lamps are often considered the least energy efficient type of electric lighting commonly found in residential buildings....

  17. Linac Coherent Light Source Overview

    Office of Energy Efficiency and Renewable Energy (EERE)

    Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

  18. Linac Coherent Light Source Overview

    ScienceCinema (OSTI)

    None

    2013-05-29

    Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

  19. Common Industrial Lighting Upgrade Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    is used to regulate the ongoing electricity provided to the lamp. COMMON INDUSTRIAL LIGHTING UPGRADE TECHNOLOGIES Due to the phase-out of the incandescent bulb and magnetic...

  20. Shedding Light on Nanocrystal Defects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Shedding Light on Nanocrystal Defects Print Nanocrystals have been the focus of much scientific interest lately, given their various advantageous mechanical properties. Their...

  1. Pedestrian-Friendly Nighttime Lighting

    Broader source: Energy.gov [DOE]

    This November 19, 2013 webinar presented issues and considerations related to pedestrian-friendly nighttime lighting, such as color rendering, safety, and adaptation. When it comes to outdoor...

  2. Commissioning Process

    Broader source: Energy.gov [DOE]

    The commissioning process for Federal facilities generally follows a four-step process. This process holds true across all forms of commissioning and for both new and existing buildings.

  3. Light-by-Light Scattering Effect in Light-Cone Supergraphs

    E-Print Network [OSTI]

    Renata Kallosh; Pierre Ramond

    2010-06-24

    We give a relatively simple explanation of the light-cone supergraph prediction for the UV properties of the maximally supersymmetric theories. It is based on the existence of a dynamical supersymmetry which is not manifest in the light-cone supergraphs. It suggests that N=4 supersymmetric Yang-Mills theory is UV finite and N=8 supergravity is UV finite at least until 7 loops whereas the $n$-point amplitudes have no UV divergences at least until $L=n+3$. Here we show that this prediction can be deduced from the properties of light-cone supergraphs analogous to the light-by-light scattering effect in QED. A technical aspect of the argument relies on the observation that the dynamical supersymmetry action is, in fact, a compensating field-dependent gauge transformation required for the retaining the light-cone gauge condition $A_+=0$.

  4. Point processes

    E-Print Network [OSTI]

    Frederic Schoenberg

    2011-01-01

    f(t) = 0 for t Renewal models embody the notion thatmodels are surveyed including Poisson processes, renewalrenewal process originating at the corresponding parent. Self-correcting models

  5. National Synchrotron Light Source 2010 Activity Report

    SciTech Connect (OSTI)

    Rowe, M.; Snyder, K. J.

    2010-12-29

    This is a very exciting period for photon sciences at Brookhaven National Laboratory. It is also a time of unprecedented growth for the Photon Sciences Directorate, which operates the National Synchrotron Light Source (NSLS) and is constructing NSLS-II, both funded by the Department of Energy's Office of Science. Reflecting the quick pace of our activities, we chose the theme 'Discovery at Light Speed' for the directorate's 2010 annual report, a fiscal year bookended by October 2009 and September 2010. The year began with the news that NSLS users Venki Ramakrishnan of Cambridge University (also a former employee in Brookhaven's biology department) and Thomas A. Steitz of Yale University were sharing the 2009 Nobel Prize in Chemistry with Ada E. Yonath of the Weizmann Institute of Science. Every research project has the potential for accolades. In 2010, NSLS users and staff published close to 900 papers, with about 170 appearing in premiere journals. Those are impressive stats for a facility nearly three decades old, testament to the highly dedicated team keeping NSLS at peak performance and the high quality of its user community. Our NSLS users come from a worldwide community of scientists using photons, or light, to carry out research in energy and environmental sciences, physics, materials science, chemistry, biology and medicine. All are looking forward to the new capabilities enabled by NSLS-II, which will offer unprecedented resolution at the nanoscale. The new facility will produce x-rays more than 10,000 times brighter than the current NSLS and host a suite of sophisticated instruments for cutting-edge science. Some of the scientific discoveries we anticipate at NSLS-II will lead to major advances in alternative energy technologies, such as hydrogen and solar. These discoveries could pave the way to: (1) catalysts that split water with sunlight for hydrogen production; (2) materials that can reversibly store large quantities of electricity or hydrogen; (3) high-temperature superconducting materials that carry electricity with no loss for efficient power transmission lines; and (4) materials for solid-state lighting with half of the present power consumption. Excitement about NSLS-II is evident in many ways, most notably the extraordinary response we had to the 2010 call for beamline development proposals for the anticipated 60 or more beamlines that NSLS-II will ultimately host. A total of 54 proposals were submitted and, after extensive review, 34 were approved. Funding from both the Department of Energy and the National Institutes of Health has already been secured to support the design and construction of a number of these beamlines. FY11 is a challenging and exciting year for the NSLS-II Project as we reach the peak of our construction activity. We remain on track to complete the project by March 2014, a full 15 months ahead of schedule and with even more capabilities than originally planned. The Photon Sciences Directorate is well on its way to fulfilling our vision of being a provider of choice for world-class photon sciences and facilities.

  6. Ramsey spectroscopy with squeezed light

    E-Print Network [OSTI]

    Kenan Qu; G. S. Agarwal

    2013-07-12

    Traditional Ramsey spectroscopy has the frequency resolution $2\\pi/T$, where $T$ is the time separation between two light fields. Using squeezed states and two-atom excitation joint detection, we present a new scheme achieving a higher resolution $\\pi/T$. We use two mode squeezed light which exhibits strong entanglement.

  7. The Linac Coherent Light Source

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    White, William E.; Robert, Aymeric; Dunne, Mike

    2015-05-01

    The Linac Coherent Light Source (LCLS) at the SLAC National Accelerator Laboratory was the first hard X-ray free-electron laser (FEL) to operate as a user facility. After five years of operation, LCLS is now a mature FEL user facility. Our personal views about opportunities and challenges inherent to these unique light sources are discussed.

  8. Turbo-Charged Lighting Design 

    E-Print Network [OSTI]

    Clark, W. H. II

    1992-01-01

    , which has many spaces with different task-specific lighting standards. The author was challenged by lighting-level requirements that spanned the range of possibilities, and was able to devise an accurate, expedient solution using a dBase language program...

  9. Lighting with Paint FABIO PELLACINI

    E-Print Network [OSTI]

    Pellacini, Fabio

    Lighting with Paint FABIO PELLACINI Dartmouth College and FRANK BATTAGLIA, R. KEITH MORLEY of trials to obtain a suitable result. We present an interactive system wherein an artist paints desired look. The artist can paint color, light shape, shadows, highlights, and reflections using a suite

  10. Processing Exemptions to Nuclear Safety Rules and Approval of Alternative Methods for Documented Safety Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy Bills andOrderNATIONALof EnergyDepartment ofSTD-1083-2009 June 2009 DOE

  11. Section 08: Approval Process for Waste Shipment From Waste Generator Sites

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust, High-ThroughputUpcomingmagnetoresistanceand Government Reform|onteam receives

  12. Processing Exemptions to Nuclear Safety Rules and Approval of Alternative Methods for Documented Safety Analyses

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested PartiesBuildingBudget | Department Primus PowerEffects onItems atII Disposal

  13. Universal signal processing method for multimode reflective sensors 

    E-Print Network [OSTI]

    Larson, Robert Eugene

    1988-01-01

    UNIVERSAL SIGNAL PROCESSING METHOD FOR MULTIMODE REFLECTIVE SENSORS A Thesis by ROBERT EUGENE LARSON Submitted to the Office of Graduate Studies of Texas A8cM University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE December 1988 Major Subject: Electrical Engineering UNIVERSAL SIGNAL PROCESSING METHOD FOR MULTIMODE REFLECTIVE SENSORS A Thesis by ROBERT EUGENE LARSON Approved as to style and content by: nry F. Taylor (Chair of Committee) hin Su...

  14. Characteristics of corn and sorghum for tortilla processing 

    E-Print Network [OSTI]

    Gonzalez de Palacios, Maria de Jesus

    1980-01-01

    CHARACTERISTICS OF CORN AND SORGHUM FOR TORTILLA PROCESSING A Thesis by MARIA DE JESUS GONZALEZ DE PALACIOS Submitted to the Graduate College of Texas A8M University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE December 1980 Major Subject: Food Science and Technology CHARACTERISTICS OF CORN AND SORGHUM FOR TORTILLA PROCESSING A Thesis by MARIA DE JESUS GONZALEZ DE PALACIOS Approved as to style and content by: an o omm t em er em er ea o...

  15. An active oil spill detection digital processing system 

    E-Print Network [OSTI]

    Dennard, Robert Marion

    1976-01-01

    AN ACTIVE OIL SPILL DETECTION DIGITAL PROCESSING SYSTEM A Thesis by Robert Marion Dennard Submitted to the Graduate College of Texas A/M University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE December 1976... Major Subject: Electrical Engineering AN ACTIVE OIL SPILL DETECTION DIGITAL PROCESSING SYSTEM A Thesis by Robert Marion Dennard Approved as to style and content by: Chairman o Committee Hea o epart ent M er em er December 1976 ABSTRACT...

  16. An automatic control system for a laboratory precipitation process 

    E-Print Network [OSTI]

    Burnett, Mary Alice

    1986-01-01

    AN AUTOMATIC CONTROL SYSTEM FOR A LABORATORY PRECIPITATION PROCESS A Thesis by MARY ALICE BURNETT Submitted to the Graduate College of Texas A 8 M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May... 1986 Major Subject: Civil Engineering AN AUTOMATIC CONTROL SYSTEM FOR A LABORATORY PRECIPITATION PROCESS A Thesis MARY ALICE BURNETT Approved as to style and content by: Bill Batchelor (Chairman of Committee) Donald L. Reddell (Member) J...

  17. Use of artificial intelligence for process modeling and control 

    E-Print Network [OSTI]

    You, Yong

    1991-01-01

    USE OF ARTIFICIAL INTELLIGENCE FOR PROCESS MODELING AND CONTROL A Thesis by YONG YOU Submitted to the Office of Graduate Stuclies of Texas A&M University in partial fulffllment of the requirement for the degree of IvIASTER OF SCIENCE May... 1991 Major Subject: Chemical Engineering USE OF ARTIFICIAL INTELLIGENCE FOR PROCESS MODELING AND CONTROL A Thesis by YONG YOU Approved as to style and content by: Michael Nikolaou (Chair of Committee) Ralph E. White (Member) Alexande...

  18. Continuous Variable Quantum Information Processing

    E-Print Network [OSTI]

    Ulrik L. Andersen; Gerd Leuchs; Christine Silberhorn

    2010-08-20

    Observables of quantum systems can posses either a discrete or a continuous spectrum. For example, upon measurements of the photon number of a light state, discrete outcomes will result whereas measurements of the light's quadrature amplitudes result in continuous outcomes. If one uses the continuous degree of freedom of a quantum system either for encoding, processing or detecting information, one enters the field of continuous variable (CV) quantum information processing. In this paper we review the basic principles of CV quantum information processing with main focus on recent developments in the field. We will be addressing the three main stages of a quantum informational system; the preparation stage where quantum information is encoded into CVs of coherent states and single photon states, the processing stage where CV information is manipulated to carry out a specified protocol and a detection stage where CV information is measured using homodyne detection or photon counting.

  19. Notice of Office of Management and Budget Action to Approve with...

    Office of Environmental Management (EM)

    Notice of Office of Management and Budget Action to Approve with Change the Information Collection Request (ICR) for a New Collection for OE Recovery Act Financial Assistance...

  20. Notice of Office of Management and Budget Action to Approve with...

    Office of Environmental Management (EM)

    Notice of Office of Management and Budget Action to Approve with Change the Information Collection Request (ICR) for an Extension of the ICR for OE Recovery Act Financial...

  1. Condenser for illuminating a ringfield camera with synchrotron emission light

    DOE Patents [OSTI]

    Sweatt, W.C.

    1996-04-30

    The present invention relates generally to the field of condensers for collecting light from a synchrotron radiation source and directing the light into a ringfield of a lithography camera. The present invention discloses a condenser comprising collecting, processing, and imaging optics. The collecting optics are comprised of concave and convex spherical mirrors that collect the light beams. The processing optics, which receive the light beams, are comprised of flat mirrors that converge and direct the light beams into a real entrance pupil of the camera in a symmetrical pattern. In the real entrance pupil are located flat mirrors, common to the beams emitted from the preceding mirrors, for generating substantially parallel light beams and for directing the beams toward the ringfield of a camera. Finally, the imaging optics are comprised of a spherical mirror, also common to the beams emitted from the preceding mirrors, images the real entrance pupil through the resistive mask and into the virtual entrance pupil of the camera. Thus, the condenser is comprised of a plurality of beams with four mirrors corresponding to a single beam plus two common mirrors. 9 figs.

  2. Condenser for illuminating a ringfield camera with synchrotron emission light

    DOE Patents [OSTI]

    Sweatt, William C. (13027 Arroyo de Vista, Albuquerque, NM 87111)

    1996-01-01

    The present invention relates generally to the field of condensers for collecting light from a synchrotron radiation source and directing the light into a ringfield of a lithography camera. The present invention discloses a condenser comprising collecting, processing, and imaging optics. The collecting optics are comprised of concave and convex spherical mirrors that collect the light beams. The processing optics, which receive the light beams, are comprised of flat mirrors that converge and direct the light beams into a real entrance pupil of the camera in a symmetrical pattern. In the real entrance pupil are located flat mirrors, common to the beams emitted from the preceding mirrors, for generating substantially parallel light beams and for directing the beams toward the ringfield of a camera. Finally, the imaging optics are comprised of a spherical mirror, also common to the beams emitted from the preceding mirrors, images the real entrance pupil through the resistive mask and into the virtual entrance pupil of the camera. Thus, the condenser is comprised of a plurality of beams with four mirrors corresponding to a single beam plus two common mirrors.

  3. Hydrocarbon Processing`s refining processes `96

    SciTech Connect (OSTI)

    NONE

    1996-11-01

    The paper compiles information on the following refining processes: alkylation, benzene reduction, benzene saturation, catalytic cracking, catalytic reforming, coking, crude distillation, deasphalting, deep catalytic cracking, electrical desalting, ethers, fluid catalytic cracking, hydrocracking, hydrogenation, hydrotreating, isomerization, resid catalytic cracking, treating, and visbreaking. The application, products, a description of the process, yield, economics, installation, and licensor are given for each entry.

  4. Learning from Manifold-Valued Data: An Application to Seismic Signal Processing

    E-Print Network [OSTI]

    Meyer, Francois

    Learning from Manifold-Valued Data: An Application to Seismic Signal Processing by Juan Ramirez Jr to Seismic Signal Processing written by Juan Ramirez Jr. has been approved for the Department of Electrical., Juan (M.S., Electrical Engineering) Learning from Manifold-Valued Data: An Application to Seismic

  5. Device structure for OLED light device having multi element light extraction and luminescence conversion layer

    DOE Patents [OSTI]

    Antoniadis; Homer (Mountain View, CA), Krummacher; Benjamin Claus (Regensburg, DE)

    2008-01-22

    An apparatus such as a light source has a multi-element light extraction and luminescence conversion layer disposed over a transparent layer of the light source and on the exterior of said light source. The multi-element light extraction and luminescence conversion layer includes a plurality of light extraction elements and a plurality of luminescence conversion elements. The light extraction elements diffuses the light from the light source while luminescence conversion elements absorbs a first spectrum of light from said light source and emits a second spectrum of light.

  6. OLED lighting devices having multi element light extraction and luminescence conversion layer

    DOE Patents [OSTI]

    Krummacher, Benjamin Claus (Regensburg, DE); Antoniadis, Homer (Mountain View, CA)

    2010-11-16

    An apparatus such as a light source has a multi element light extraction and luminescence conversion layer disposed over a transparent layer of the light source and on the exterior of said light source. The multi-element light extraction and luminescence conversion layer includes a plurality of light extraction elements and a plurality of luminescence conversion elements. The light extraction elements diffuses the light from the light source while luminescence conversion elements absorbs a first spectrum of light from said light source and emits a second spectrum of light.

  7. Process for fabrication of cermets

    DOE Patents [OSTI]

    Landingham, Richard L. (Livermore, CA)

    2011-02-01

    Cermet comprising ceramic and metal components and a molten metal infiltration method and process for fabrication thereof. The light weight cermets having improved porosity, strength, durability, toughness, elasticity fabricated from presintered ceramic powder infiltrated with a molten metal or metal alloy. Alumina titanium cermets biocompatible with the human body suitable for bone and joint replacements.

  8. Quasi light fields: Extending the light field to coherent radiation

    E-Print Network [OSTI]

    Accardi, Anthony J.

    Imaging technologies such as dynamic viewpoint generation are engineered for incoherent radiation using the traditional light field, and for coherent radiation using electromagnetic field theory. We present a model of ...

  9. Approval of Contractor Executive Salaries by Department of Energy Personnel

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p u tCorporation |Inc.:ServicesSvcsApproval of Contractor

  10. APPROVAL REQUIRED WHEN EMPLOYEES ENGAGE IN OUTSIDE EMPLOYMENT

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p u t y A s sconveyance of four groundwater wellsAPPROVAL

  11. Integrating Safety Issues in Optimizing Solvent Selection and Process Design 

    E-Print Network [OSTI]

    Patel, Suhani Jitendra

    2011-10-21

    Incorporating consideration for safety issues while designing solvent processes has become crucial in light of the chemical process incidents involving solvents that have taken place in recent years. The implementation of inherently safer design...

  12. Light Front Quantization with the Light Cone Gauge

    E-Print Network [OSTI]

    D. G. C. McKeon; Chenguang Zhao

    2015-10-07

    The Dirac procedure for dealing with constraints is applied to the quantization of gauge theories on the light front. The light cone gauge is used in conjunction with the first class constraints that arise and the resulting Dirac brackets are found. These gauge conditions are not used to eliminate degrees of freedom from the action prior to applying the Dirac constraint procedure. This approach is illustrated by considering Yang-Mills theory and the superparticle in a 2 + 1 dimensional target space.

  13. Inorganic volumetric light source excited by ultraviolet light

    DOE Patents [OSTI]

    Reed, S.; Walko, R.J.; Ashley, C.S.; Brinker, C.J.

    1994-04-26

    The invention relates to a composition for the volumetric generation of radiation. The composition comprises a porous substrate loaded with a component capable of emitting radiation upon interaction with an exciting radiation. Preferably, the composition is an aerogel substrate loaded with a component, e.g., a phosphor, capable of interacting with exciting radiation of a first energy, e.g., ultraviolet light, to produce radiation of a second energy, e.g., visible light. 4 figures.

  14. Inorganic volumetric light source excited by ultraviolet light

    DOE Patents [OSTI]

    Reed, Scott (Albuquerue, NM); Walko, Robert J. (Albuquerue, NM); Ashley, Carol S. (Albuquerue, NM); Brinker, C. Jeffrey (Albuquerue, NM)

    1994-01-01

    The invention relates to a composition for the volumetric generation of radiation. The composition comprises a porous substrate loaded with a component capable of emitting radiation upon interaction with an exciting radiation. Preferably, the composition is an aerogel substrate loaded with a component, e.g., a phosphor, capable of interacting with exciting radiation of a first energy, e.g., ultraviolet light, to produce radiation of a second energy, e.g., visible light.

  15. Lighting the Way with Compact Fluorescent Lighting | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested Parties - WAPA PublicLED ADOPTIONtoLighting System Optimization:Lighting the

  16. A Frequency Analysis of Light Transport

    E-Print Network [OSTI]

    Durand, Frédo

    #12;A Frequency Analysis of Light Transport F. Durand, MIT CSAIL N. Holzschuch, C. Soler, ARTIS lighting onlyDirect lighting only #12;Frequency aspects of light transport · Blurriness = frequency content ­ From equations of light transport #12;Unified framework: · Spatial frequency (e.g. shadows, textures

  17. Beyond the Replacement Paradigm: Smart Lighting

    E-Print Network [OSTI]

    Salama, Khaled

    Hole? · DC device in an AC Powered World · Cool light source with thermal issues · High Efficacy ­ High Spectral Density Information Informationneeded to makethe Light SMART #12;10 Light Flow ­ InformationBeyond the Replacement Paradigm: Smart Lighting Robert F. Karlicek, Jr. Director, Smart Lighting

  18. Projection screen having reduced ambient light scattering

    DOE Patents [OSTI]

    Sweatt, William C. (Albuquerque, NM)

    2010-05-11

    An apparatus and method for improving the contrast between incident projected light and ambient light reflected from a projection screen are described. The efficiency of the projection screen for reflection of the projected light remains high, while permitting the projection screen to be utilized in a brightly lighted room. Light power requirements from the projection system utilized may be reduced.

  19. Light metal explosives and propellants

    DOE Patents [OSTI]

    Wood, Lowell L.; Ishikawa, Muriel Y.; Nuckolls, John H.; Pagoria, Phillip F.; Viecelli, James A.

    2005-04-05

    Disclosed herein are light metal explosives, pyrotechnics and propellants (LME&Ps) comprising a light metal component such as Li, B, Be or their hydrides or intermetallic compounds and alloys containing them and an oxidizer component containing a classic explosive, such as CL-20, or a non-explosive oxidizer, such as lithium perchlorate, or combinations thereof. LME&P formulations may have light metal particles and oxidizer particles ranging in size from 0.01 .mu.m to 1000 .mu.m.

  20. Presented at the IS&T/SID Fifth Color Imaging Conference, November 1997 Inverse Lighting for Photography

    E-Print Network [OSTI]

    Marschner, Steve

    Presented at the IS&T/SID Fifth Color Imaging Conference, November 1997 Inverse Lighting, New York Abstract We introduce a technique for improving photographs using inverse lighting, a new process based on algorithms devel­ oped in computer graphics for computing the reflection of light in 3D

  1. Optical processing furnace with quartz muffle and diffuser plate

    DOE Patents [OSTI]

    Sopori, Bhushan L. (Denver, CO)

    1996-01-01

    An optical furnace for annealing a process wafer comprising a source of optical energy, a quartz muffle having a door to hold the wafer for processing, and a quartz diffuser plate to diffuse the light impinging on the quartz muffle; a feedback system with a light sensor located in the wall of the muffle is also provided for controlling the source of optical energy.

  2. Tips: Lighting | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    are available as flood lights. These models have been tested to withstand the rain and snow so they can be used in exposed fixtures. Look for ENERGY STAR-qualified fixtures that...

  3. Next Generation Light Source Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Next Generation Light Source Workshops A series of workshops will be held in late August with the goal of refining the scientific drivers for the facility and translating the...

  4. Series cell light extinction monitor

    DOE Patents [OSTI]

    Novick, Vincent J. (Downers Grove, IL)

    1990-01-01

    A method and apparatus for using the light extinction measurements from two or more light cells positioned along a gasflow chamber in which the gas volumetric rate is known to determine particle number concentration and mass concentration of an aerosol independent of extinction coefficient and to determine estimates for particle size and mass concentrations. The invention is independent of particle size. This invention has application to measurements made during a severe nuclear reactor fuel damage test.

  5. The solid state lighting initiative: An industry/DOE collaborativeeffort

    SciTech Connect (OSTI)

    Johnson, Steve

    2000-10-01

    A new era of technology is emerging in lighting. It is being propelled by the dramatic improvements in performance of solid state light sources. These sources offer an entirely new array of design aspects not achievable with current light sources. At the same time, their performance characteristics continue to improve and are expected to eclipse those of the most common light sources within the near future. High efficiency is one of these performance attributes motivating the Department of Energy (DOE) to work with the manufacturers of this new technology to create a program plan sufficiently comprehensive to support an industry-driven Solid State Lighting Initiative before Congress. The purpose of the initiative is to educate Congress about the potential of this technology to reduce the electric lighting load within the United States and, consequently, to realize the associated environmental benefits. The initiative will solicit congressional support to accelerate the development of solid state technology through investment in the research and development necessary to overcome the technical barriers that currently limit the products to niche markets. While there are multiple technologies being developed as solid state light sources, the two technologies which hold the most promise for application to general illumination are Light Emitting Diodes (LEDs) and Organic Light Emitting Diodes (OLEDs). The form of these sources can be quite different from current sources, allowing exciting new design uses for the products. Being diffuse sources, OLEDs are much lower in intensity per unit area than LEDs. The manufacturing process for OLEDs lends itself to shapes that can be formed to different geometries, making possible luminous panels or flexible luminous materials. Conversely, LEDs are very intense point sources which can be integrated into a small space to create an intense source or used separately for less focused applications. Both OLED and LED sources are expected to be thinner than other comparable sources; this thinness offers additional design opportunities.

  6. Controls for Solid-State Lighting

    E-Print Network [OSTI]

    Rubinstein, Francis

    2007-01-01

    the promising hybrid LED lighting systems are: 1. LED Hybridexample of a hybrid LED lighting system, is a system fieldedwhich switches to low-level LED lighting after the occupancy

  7. Embodied Energy and Off-Grid Lighting

    E-Print Network [OSTI]

    Alstone, Peter

    2012-01-01

    Self-reported Impacts of LED Lighting Technology Comparedto Fuel-based Lighting on Night Market Business Prosperity28, no. 4, pp. 533-546. Lighting Africa (prepared by Dalberg

  8. EECBG Success Story: Lighting Retrofit Improving Visibility,...

    Broader source: Energy.gov (indexed) [DOE]

    New LED lighting fixtures (right) emit a whiter light than existing high-pressure sodium cobra head streetlights (left) and don't spill light onto nearby houses. | Photos courtesy...

  9. Outdoor Solar Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Outdoor Solar Lighting Outdoor Solar Lighting July 29, 2012 - 6:34pm Addthis Outdoor solar lights use solar cells, which convert sunlight into electricity, and are easy to install...

  10. Toward ZnO Light Emitting Diode

    E-Print Network [OSTI]

    Liu, Jianlin

    2008-01-01

    applications such as light emitting diodes (LEDs) and laser009 "Toward ZnO Light Emitting Diode" Jianlin Liu July 2008Title: “Toward ZnO Light Emitting Diode” Sponsor: UC Energy

  11. Novel phosphors for solid state lighting

    E-Print Network [OSTI]

    Furman, Joshua D

    2010-11-16

    Solid state white light emitting diode lighting devices outperform conventional light sources in terms of lifetime, durability, and lumens per watt. However, the capital contribution is still to high to encourage widespread adoption. Furthermore...

  12. Cost-effective Lighting Retrofits: Lessons Learned 

    E-Print Network [OSTI]

    Fisher, M. D.

    1994-01-01

    -effective Lighting Retrofits: Lessons Learned Mark D. Fisher Certified Lighting Efficiency Professional Johnson Controls Dallas, Texas ABSTRACT Facility managers and energy engineers contemplating a lighting retrofit are confronted with a confusing array...

  13. LIGHT SCATTERING STUDIES OF SILICA AEROGELS

    E-Print Network [OSTI]

    Hunt, A.J.

    2010-01-01

    van de Hulst, H.C. , Light Scattering by Small Particles,A New Polarization-Modulated Light Scattering Instrument,"and interpretation of light scattering effects in aerogels.

  14. Advanced Light Source Activity Report 2005

    E-Print Network [OSTI]

    Tamura Ed., Lori S.

    2010-01-01

    upgrade on the Advanced Light Source," Nucl. Instrum. Meth.n photoemission at the Advanced Light Source," Radiât. Phys.high-pressure studies at the Advanced Light Source w i t h a

  15. Electrodeposited Light-Emitting Nanojunctions Wendong Xing,

    E-Print Network [OSTI]

    Potma, Eric Olaf

    Electrodeposited Light-Emitting Nanojunctions Wendong Xing, Wenbo Yan, Talin Ayvazian, Yong Wang-CdSe. Light-emitting nanojunctions (LEnJs) prepared at both temperatures show a low threshold voltage for light emission of

  16. Luminous Efficacy Standards for General Purpose Lights

    Broader source: Energy.gov [DOE]

    *Efficacy refers to the overall energy efficiency of light and is measured in lumens (measure of light output) per watt (measure of power input). The efficacy of a typical incandescent light bulb...

  17. Lumental : web-based tunable lighting control

    E-Print Network [OSTI]

    Hall, Harrison King

    2012-01-01

    Dynamically adjusting the light spectrum of spectrum-tunable light fixtures promises significant energy savings over binary or incremental dimming control. To enable this level of controllability, lighting must evolve from ...

  18. Development of a light force accelerometer

    E-Print Network [OSTI]

    Butts, David LaGrange

    2008-01-01

    In this work, the feasibility of a light force accelerometer was experimentally demonstrated. The light force accelerometer is an optical inertial sensor which uses focused laser light to levitate and trap glass microspheres ...

  19. Monte Carlo methods for light propagation in biological tissues

    E-Print Network [OSTI]

    2014-01-08

    Jan 8, 2014 ... must be developped to better control and understand PDT responses. In this ... The light propagation phenomenon involves three processes: ... However, this method is time consuming in 3D and the associated softwares lie ... the simple absorption coefficient µa > 0. ..... To see this, it suffices to integrate the.

  20. Light oil yield improvement project at Granite City Division Coke/By-Product Plant

    SciTech Connect (OSTI)

    Holloran, R.A. [National Steel Corp., Granite City, IL (United States). Granite City Div.

    1995-12-01

    Light oil removal from coke oven gas is a process that has long been proven and utilized throughout many North American Coke/By-Products Plants. The procedures, processes, and equipment requirements to maximize light oil recovery at the Granite City By-Products Plant will be discussed. The Light Oil Yield Improvement Project initially began in July, 1993 and was well into the final phase by February, 1994. Problem solving techniques, along with utilizing proven theoretical recovery standards were applied in this project. Process equipment improvements and implementation of Operator/Maintenance Standard Practices resulted in an average yield increase of 0.4 Gals./NTDC by the end of 1993.

  1. UNIVERSITY OF CALIFORNIA SAN DIEGO AUTHORIZATION TO APPROVE UNIVERSITY SPONSORED SPECIAL ENTERTAINMENT

    E-Print Network [OSTI]

    California at San Diego, University of

    UNIVERSITY OF CALIFORNIA SAN DIEGO AUTHORIZATION TO APPROVE UNIVERSITY SPONSORED SPECIAL, original will be forwarded to UC San Diego Travel and a copy provided to the department and Policy to UC San Diego Travel. Responsibility: Approval for all special university-sponsored entertainment

  2. Educational and Training Opportunities -1 -Approved: 08/21/2012 Educational and Training Opportunities

    E-Print Network [OSTI]

    Hammack, Richard

    in the Human Resources' Educational and Training Opportunities Guidelines. Courses should be taken during nonEducational and Training Opportunities - 1 - Approved: 08/21/2012 Educational and Training Opportunities Policy Type: Administrative Responsible Office: VCU Human Resources Initial Policy Approved: 12

  3. COP Strategic Plan 2012 Approved by Strategic Planning Retreat Participants March 6, 2012

    E-Print Network [OSTI]

    Capecchi, Mario R.

    COP Strategic Plan 2012 Approved by Strategic Planning Retreat Participants March 6, 2012 Approved Vote: 45 yes, 0 no #12;University of Utah College of Pharmacy Strategic Plan 2012 Page 2 College of Pharmacy Strategic Action Plan Mission The University of Utah College

  4. COST ACCOUNTING STANDARDS BOARD FORM APPROVED OMB NUMBER DISCLOSURE STATEMENT 0348-0055

    E-Print Network [OSTI]

    Alabama in Huntsville, University of

    BY PUBLIC LAW 100-679 INDEX EDUCATIONAL INSTITUTIONS COST ACCOUNTING STANDARDS BOARD FORM APPROVED OMBCOST ACCOUNTING STANDARDS BOARD FORM APPROVED OMB NUMBER DISCLOSURE STATEMENT 0348-0055 REQUIRED # DISCLOSURE STATEMENT REQUIRED BY PUBLIC LAW 100-679 EDUCATIONAL INSTITUTIONS INDEX GENERAL INSTRUCTIONS

  5. Bylaws of the Civil and Environmental Engineering Academy (Revised and Approved April 8, 2006)

    E-Print Network [OSTI]

    Chen, Xinzhong

    Bylaws of the Civil and Environmental Engineering Academy (Revised and Approved April 8, 2006) (Name Revised and Approved April 5, 2008) BYLAWS of the CIVIL AND ENVIRONMENTAL ENGINEERING ACADEMY) ARTICLE I ­ NAME The name of this organization shall be the Civil and Environmental Engineering Academy

  6. Approved September 12, 2003 Associate in Arts to BA/BS in Psychology

    E-Print Network [OSTI]

    Gering, Jon C.

    Approved September 12, 2003 Associate in Arts to BA/BS in Psychology Students will complete Sciences--6 credits PSYC 140 General Psychology Complete one additional 3-credit course: #12;Approved Lifespan Development ­ 4 credits OR PSYC 250 Social Psychology ­ 3 credits No more than one

  7. Approved Module Information for LE2003, 2014/5 Module Title/Name: Introduction to Intercultural

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    , within an international business context, to: Define what they understand by the term culture and how collecting data from human subjects, a procedure which requires formal ethical approval. ALL students outline referring to human subjects MUST be accompanied by a completed ethical approval form for the tutor

  8. Instruction Guide Temporary Substitution for Approvers in myUF Market

    E-Print Network [OSTI]

    Sheremet, Alexandru

    a Substitute to All Requisition Folders button o Search for the name of the temporary approver (enter the name select someone who is NOT a requestor as a substitute. If a long term substitution needs to take place to different folders. a. To search for and assign an approver to all your folders at once, click the Assign

  9. Development of a FiberDevelopment of a Fiber Continuity and LightContinuity and Light

    E-Print Network [OSTI]

    Minnesota, University of

    Development of a FiberDevelopment of a Fiber Continuity and LightContinuity and Light Calibration of light is collected by a WLS fiber;The flash of light is collected by a WLS fiber; the core contains a dye that shifts the bluethe core contains a dye that shifts the blue light wavelength to green.light

  10. COST TRANSFER REQUEST FORM This form is required for final approval of any expense transfer (ET) or labor distribution

    E-Print Network [OSTI]

    Capogna, Luca

    COST TRANSFER REQUEST FORM This form is required for final approval of any expense transfer (ET) or labor distribution (LD) transfers to sponsored program and required cost share cost centers: ____________________ Department: ________________ Phone: _______ Cost Transfer Document Number to be Approved

  11. Lighting Market Study: Illuminating the Northwest Efficiency

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lighting Market Study: Illuminating the Northwest Efficiency Community Summer 2014 through Winter 2015 Research Manager: Carrie Cobb, clcobb@bpa.gov, 503-230-4985 The lighting...

  12. New Laser's "First Light" Shatters Record | Jefferson...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Accelerator Facility have delivered first light from their Free Electron Laser (FEL). Only 2 years after ground was broken for the FEL, infrared light of more than...

  13. Innovative Office Lighting System with Integrated Spectrally...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    an innovative LED office lighting system solution that integrates light delivery, optics, and controls for energy efficiency and occupant health and well-being. The office...

  14. OTEC- Commercial Lighting Retrofit Rebate Program

    Broader source: Energy.gov [DOE]

    The Oregon Trail Electric Consumers Cooperative (OTEC) offers a commercial lighting retrofit program that provides rebates for commercial businesses that change existing lighting to more energy...

  15. Chapter 5: Lighting, HVAC, and Plumbing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    : Lighting, HVAC, and Plumbing High-Performance Engineering Design Lighting System Design Mechanical System Design Central Plant Systems Plumbing and Water Use Building Control...

  16. Types of Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    selection. Types of lighting include: Fluorescent Incandescent Outdoor solar Light-emitting diode (LED) Also learn how energy-efficient lightbulbs compare to traditional...

  17. Commercial Building Energy Alliance Exterior Lighting Scoping...

    Office of Scientific and Technical Information (OSTI)

    Commercial Building Energy Alliance Exterior Lighting Scoping Study Citation Details In-Document Search Title: Commercial Building Energy Alliance Exterior Lighting Scoping Study...

  18. Ecological Consequences of Artificial Night Lighting

    E-Print Network [OSTI]

    Piselli, Kathy

    2006-01-01

    s editors, the idea that light pollution might pose a broadpublic opinion against light pollution. But consider thatlight in the night sky in national parks, finding pollution

  19. Outdoor Area Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for outdoor areas. Outdoor Area Lighting (June 2008) More Documents & Publications Philadelphia International Airport Apron Lighting: LED System Performance in a Trial...

  20. Philadelphia International Airport Apron Lighting: LED System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Philadelphia International Airport Apron Lighting: LED System Performance in a Trial Installation Philadelphia International Airport Apron Lighting: LED System Performance in a...