Powered by Deep Web Technologies
Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Transit Rider Information King County Metro Transit  

E-Print Network [OSTI]

Transit Rider Information King County Metro Transit Rider Information (206) 553-3000 http the On the Move Blog http://www.seattle.gov/transportation King County Road Services Division Road Maintenance closely with King County Metro Transit, the Seattle School District, local universities, hospitals

Queitsch, Christine

2

Risk factors for injury accidents among moped and motorcycle riders  

E-Print Network [OSTI]

Risk factors for injury accidents among moped and motorcycle riders Aurélie Moskal a , Jean on the vehicle. Moped and motorcycle riders are analyzed separately, adjusting for the main characteristics of the accident. Results: for both moped and motorcycle riders, being male, not wearing a helmet, exceeding

Paris-Sud XI, Université de

3

Graduate Kentucky Metropolitan Rate Application  

E-Print Network [OSTI]

Graduate Kentucky Metropolitan Rate Application REGISTRAR'S OFFICE University of Cincinnati PO Box Kentucky counties are able to attend UC at an established metropolitan tuition rate. Non Kentucky residency, these students are not eligible for the graduate metropolitan rate. Kentucky counties

Franco, John

4

Rigging a horse and rider: simulating the predictable and repetitive movement of the rider  

E-Print Network [OSTI]

????????????????????. 6.1 Horse?s Foot Support??????.???..?????...???.. 6.2 Horse?s Height and Rear Rotation?????????????? 6.3 Horse?s Foot Position Forward or Backward?????????? 7. CHARACTER... is the greatest??????????????????.????.?.. 28. Analyzing the horse?s rear foot position??????????????.?. 29. Analyzing the horse?s front foot position??????????????.? 30. The height of the horse?s fore feet?????????????????? 31. Rider?s seat shifts backward...

Kuhnel, Jennifer Lynn

2004-09-30T23:59:59.000Z

5

Undergraduate Kentucky Metropolitan Rate Application  

E-Print Network [OSTI]

Undergraduate Kentucky Metropolitan Rate Application REGISTRAR'S OFFICE University of Cincinnati PO@ucmail.uc.edu Undergraduate residents of specified counties in Kentucky, who are matriculated in degree or certificate requirement to establish Kentucky residency, these students are not eligible for the undergraduate

Franco, John

6

Wheeler, Conrad, and Figliozzi 1 A Statistical Analysis of Bicycle Rider Performance  

E-Print Network [OSTI]

Wheeler, Conrad, and Figliozzi 1 A Statistical Analysis of Bicycle Rider Performance: The impact) A Statistical Analysis of Bicycle Rider Performance: The impact of gender on riders' performance at signalized;Wheeler, Conrad, and Figliozzi 2 A Statistical Analysis of Bicycle Rider Performance: The impact of gender

Bertini, Robert L.

7

Motorcycle Rider Integrated Safety OPEN POSITION AT PARTNER UNIPD IN THE FIELD OF SAFER MOTORCYCLING  

E-Print Network [OSTI]

MOTORIST Motorcycle Rider Integrated Safety OPEN POSITION AT PARTNER UNIPD IN THE FIELD OF SAFER MOTORCYCLING MOTORIST (Motorcycle Rider Integrated Safety) is an Initial Training Network (ITN) Nr. 608092 involved as MOTORIST Associated #12;MOTORIST Motorcycle Rider Integrated Safety Partners, on rider training

Cesare, Bernardo

8

Motorcycle Riding Simulator: How to Estimate Robustly the Rider's Action?  

E-Print Network [OSTI]

1 Motorcycle Riding Simulator: How to Estimate Robustly the Rider's Action? Lamri Nehaoua, Hichem Arioui and Said Mammar Abstract This paper deals with a motorcycle riding simulator and addresses two key. The reconstructed torque is used as the main control of the virtual motorcycle dynamic model, in order to actuate

Paris-Sud XI, Université de

9

For Motorcycle Riders Don't place yourself in danger of becoming a statistic  

E-Print Network [OSTI]

For Motorcycle Riders Risks Don't place yourself in danger of becoming a statistic by increasing · Makesureyouhaveasuitableseatfittedonyour motorcycle · Apassengerisyourresponsibility-makesurethey areaswellprotectedasyouare

Tobar, Michael

10

Development and formative evaluation of a motorcycle rider training intervention to address risk taking.  

E-Print Network [OSTI]

??The need to address on-road motorcycle safety in Australia is important due to the disproportionately high percentage of riders and pillions killed and injured each (more)

Rowden, Peter John

2012-01-01T23:59:59.000Z

11

FARKLE or Die: Edgework, Risk Control, and Impression Management among BMW Motorcycle Riders.  

E-Print Network [OSTI]

??This research explores intersections of identity and voluntary risk taking, or edgework, among BMW motorcycle riders. Drawing upon interviews, participant observation, and analytic autoethnographic methods (more)

Austin, Mathew L.

2010-01-01T23:59:59.000Z

12

Workshop on Thermonuclear Reaction Rates for Astrophysics Applications  

E-Print Network [OSTI]

Workshop on Thermonuclear Reaction Rates for Astrophysics Applications 24-25 November 2011, Athensrd and final circular for the Workshop on Thermonuclear Reaction Rates for Astrophysics Applications

13

Cracked skulls and social liability : relating helmet safety messages to motorcycle riders.  

E-Print Network [OSTI]

??Indiana University-Purdue University Indianapolis (IUPUI) Grounded theory analysis, informed by a socio-cultural lens, was applied to the narratives of eighteen motorcycle riders in order to (more)

Voight, Susan Amy

2014-01-01T23:59:59.000Z

14

Workshop on Thermonuclear Reaction Rates for Astrophysics Applications  

E-Print Network [OSTI]

Workshop on Thermonuclear Reaction Rates for Astrophysics Applications 24-25 November 2011, Athens circular for the Workshop on Thermonuclear Reaction Rates for Astrophysics Applications, to be held of thermonuclear reaction rates. The topics of the workshop, in relation with thermonuclear reaction rates

15

Adaptive Rate Stream Processing for Smart Grid Applications on Clouds  

E-Print Network [OSTI]

Adaptive Rate Stream Processing for Smart Grid Applications on Clouds Yogesh Simmhan University within a smart (power) grid are providing utilities and power systems researchers with unprecedentedEngineering applications in the smart grid domain. One unique aspect of our work is the use of adaptive rate control

Prasanna, Viktor K.

16

Green Marketing, Renewables, and Free Riders: Increasing Customer Demand for a Public Good  

E-Print Network [OSTI]

LBNL-40632 UC-1321 Green Marketing, Renewables, and Free Riders: Increasing Customer Demand Customers that They Can "Make a Difference" . . . . . . . . . . . . . . . . 22 Emphasize Customer Retention errors and/or omissions are, of course, the full responsibility of the authors. The work described

17

Experiences with leak rate calculations methods for LBB application  

SciTech Connect (OSTI)

In this paper, three leak rate computer programs for the application of leak before break analysis are described and compared. The programs are compared to each other and to results of an HDR Reactor experiment and two real crack cases. The programs analyzed are PIPELEAK, FLORA, and PICEP. Generally, the different leak rate models are in agreement. To obtain reasonable agreement between measured and calculated leak rates, it was necessary to also use data from detailed crack investigations.

Grebner, H.; Kastner, W.; Hoefler, A.; Maussner, G. [and others

1997-04-01T23:59:59.000Z

18

Electrochemical Corrosion Rate Sensors for Waste Incineration Applications  

SciTech Connect (OSTI)

Electrochemical corrosion rate sensors work in high temperature waste incineration applications where ash is deposited. The ash serves as the electrolyte for electrochemical measurements, such as liner polarization resistance, electrochemical noise, and harmonic distortion analyses. Results to date have shown that these types of sensors respond qualitatively to changes in temperature, gas composition, alloy composition, and type of ash. Several years of research have shown that high temperature corrosion rate probes need to be better understood before corrosion rate can be used as a process variable by power plant operators. More recent research has shown that electrochemical corrosion probes typically measure lower corrosion rates than those measured by standard mass loss techniques. While still useful for monitoring changes in corrosion rates, absolute probe corrosion rates will need a calibration factor to be useful. Ideas for research that may help resolve these issues are presented.

Covino, B.S., Jr.; Bullard, S.J.; Matthes, S.A.; Holcomb, G.R.; Ziomek-Moroz, M.; Eden, D.A. (Honeywell Intercorr)

2007-03-01T23:59:59.000Z

19

Understanding the Link Between Bicyclists and Light Rail Survey Results from Bicycle Riders on MAX in Portland, Oregon  

E-Print Network [OSTI]

Understanding the Link Between Bicyclists and Light Rail Survey Results from Bicycle Riders on MAX Introduction 1 Portland Bicycle Master Plan, Section V 2 History of Bicycles on MAX 3 Benefits of the Bicycle is a bicycle friendly city. In 1995 and 1998, Bicycling Magazine named Portland the best city for bicycling

Bertini, Robert L.

20

Effect of Nitrogen Application Rates on Pecan Above Ground Physiology and Root Traits  

E-Print Network [OSTI]

The United States pecan industry is experiencing a rapid acreage increase. Many growers believe high rates of nitrogen (N) accelerate tree development and increase yields; however, a high rate of N application may not be cost-effective and can...

Hannah, Hayley Meredith

2014-04-28T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Real-time variable rate Pix application system using a plant height sensor  

E-Print Network [OSTI]

The objective of this study was to develop a chemical application system that could measure plant size, determine the optimum chemical rate to apply and control that application. A plant height sensor, the MEPRT growth relationship software...

Beck, Andy Dwayne

2012-06-07T23:59:59.000Z

22

Cost Bases for Incentive Rates Applicable to Industrial Loads  

E-Print Network [OSTI]

great deal of attention and increased acceptance. This represents a substantial change in attitude, particularly on the part of the regulatory commissions; a few years ago any proposal related to an incentive type rate would not have been... in rate discrimination as between customer classes. Over the last few years many utilities have experienced changes that have resulted in increased interest in incentive rates by the utility, by its customer, and by the regulatory commission. In most...

Stover, C. N.

23

Electrochemical corrosion rate probes for high temperature energy applications  

SciTech Connect (OSTI)

Electrochemical corrosion rate (ECR) probes were constructed and exposed along with mass loss coupons in a N2/O2/CO2/H2O environment to determine ECR probe operating characteristics. Temperatures ranged from 450 to 800 C and both ECR probes and mass loss coupons were coated with ash. Results are presented in terms of the probe response to temperature, the measured zero baseline, and the quantitative nature of the probes. The effect of Stern-Geary constant and the choice of electrochemical technique used to measure the corrosion rate are also discussed. ECR probe corrosion rates were a function of time, temperature, and process environment and were found to be quantitative for some test conditions. Measured Stern-Geary constants averaged 0.0141 V/decade and the linear polarization technique was found to be more quantitative than the electrochemical noise technique.

Covino, Bernard S., Jr.; Bullard, Sophie J.; Cramer, Stephen D.; Holcomb, Gordon R.; Ziomek-Moroz, M.; Cayard, M.S. (InterCorr International Inc.); Eden, D.A. (InterCorr International Inc.)

2004-01-01T23:59:59.000Z

24

Die Materials for Critical Applications and Increased Production Rates  

SciTech Connect (OSTI)

Die materials for aluminum die-casting need to be resistant to heat checking, and have good resistance to washout and to soldering in a fast flow of molten aluminum. To resist heat checking, die materials should have a low coefficient of thermal expansion, high thermal conductivity, high hot yield strength, good temper softening resistance, high creep strength, and adequate ductility. To resist the washout and soldering, die materials should have high hot hardness, good temper resistance, low solubility in molten aluminum and good oxidation resistance. It is difficult for one material to satisfy with all above requirements. In practice, H13 steel is the most popular material for aluminum die casting dies. While it is not an ideal choice, it is substantially less expensive to use than alternative materials. However, in very demanding applications, it is sometimes necessary to use alternative materials to ensure a reasonable die life. Copper-base, nickel-base alloys and superalloys, titanium-,molybdenum-, tungsten-base alloys, and to some extent yttrium and niobium alloys, have all been considered as potential materials for demanding die casting applications. Most of these alloys exhibit superior thermal fatigue resistance, but suffer from other shortcomings.

David Schwam; John Wallace; Sebastian Birceanu

2002-11-30T23:59:59.000Z

25

The effect of water application rate on the formation of a soil crust  

E-Print Network [OSTI]

THE EFFECT OF WATER APPLICATION RATE ON THE FOR11ATION OF A SOIL CRUST A Thesis by FAUSTO DANIEL BOGRAN CARCA1'10 Subni tted to the Graduate College of Texas A&M University in partial fulfillnent of the requlrenents for the degree of MASTER... OF SCIENCE May 1985 Major Subject: Agricultural Engineering THE EFFECT OF WATER APPLICATION RATE ON THE FORMATION OF A SOIl. CRUST A Thesi s by FAUSTO DANIEL BOGRAN CARCAMO Approved as to style and content by: ars a . McFar an (Chairman...

Bogran Carcamo, Fausto Daniel

1985-01-01T23:59:59.000Z

26

Kernel-Correlated Levy Field Driven Forward Rate and Application to Derivative Pricing  

SciTech Connect (OSTI)

We propose a term structure of forward rates driven by a kernel-correlated Levy random field under the HJM framework. The kernel-correlated Levy random field is composed of a kernel-correlated Gaussian random field and a centered Poisson random measure. We shall give a criterion to preclude arbitrage under the risk-neutral pricing measure. As applications, an interest rate derivative with general payoff functional is priced under this pricing measure.

Bo Lijun [Xidian University, Department of Mathematics (China); Wang Yongjin [Nankai University, School of Business (China); Yang Xuewei, E-mail: xwyangnk@yahoo.com.cn [Nanjing University, School of Management and Engineering (China)

2013-08-01T23:59:59.000Z

27

Battery-Supercapacitor Hybrid System for High-Rate Pulsed Load Applications  

E-Print Network [OSTI]

Battery-Supercapacitor Hybrid System for High-Rate Pulsed Load Applications Donghwa Shin, Younghyun layer capacitors, or simply supercapacitors, have extremely low internal resistance, and a battery-supercapacitor architecture comprising a simple parallel connection does not perform well when the supercapacitor capacity

Pedram, Massoud

28

Interaction potentials of molecular clusters with applications to collision rate calculations  

E-Print Network [OSTI]

: William H. Marlow (Chair of Commitee) on R. Hart (M her) Marko aric (M r) J. W, Poston (Head of Department) December 1989 ABSTRACT Interaction Potentials of Molecular Clusters with Applications to Collision Rates. (December 1989) Alexis Sylvain... Parents. . . ACKNOWLEDGEMENTS I would like to thank the persons without whom this work would not have been possible. Among those, I would like to express my gratitude to my Conunittee Chairman Dr, W. H. Marlow for his guidance, kindness and dedication...

Amadon, Alexis Sylvain

2012-06-07T23:59:59.000Z

29

The Effect of Planting Strategies, Imazethapyr Rates, and Application Timings on CLEARFIELD Hybrid Rice Injury  

E-Print Network [OSTI]

) and is sold commercially as NewPathTM (BASF 2010). This chemical was effective up to 95% in controlling red rice in commercial rice when used according to the CLEARFIELD? system (Steele et al. 2002). ! Imazethapyr controls some annual broadleaf weeds... of imazethapyr (0.07-0.105 kg ha-1 for both first and second applications (BASF 2010)). Significant differences were recorded in one treatment that received less than a recommended rate. This difference is likely due to increased weed pressure in the plot...

Turner, Aaron Lyles

2012-02-14T23:59:59.000Z

30

Dosimetric characterization and output verification for conical brachytherapy surface applicators. Part II. High dose rate {sup 192}Ir sources  

SciTech Connect (OSTI)

Purpose: Historically, treatment of malignant surface lesions has been achieved with linear accelerator based electron beams or superficial x-ray beams. Recent developments in the field of brachytherapy now allow for the treatment of surface lesions with specialized conical applicators placed directly on the lesion. Applicators are available for use with high dose rate (HDR){sup 192}Ir sources, as well as electronic brachytherapy sources. Part I of this paper discussed the applicators used with electronic brachytherapy sources. Part II will discuss those used with HDR {sup 192}Ir sources. Although the use of these applicators has gained in popularity, the dosimetric characteristics have not been independently verified. Additionally, there is no recognized method of output verification for quality assurance procedures with applicators like these. Methods: This work aims to create a cohesive method of output verification that can be used to determine the dose at the treatment surface as part of a quality assurance/commissioning process for surface applicators used with HDR electronic brachytherapy sources (Part I) and{sup 192}Ir sources (Part II). Air-kerma rate measurements for the {sup 192}Ir sources were completed with several models of small-volume ionization chambers to obtain an air-kerma rate at the treatment surface for each applicator. Correction factors were calculated using MCNP5 and EGSnrc Monte Carlo codes in order to determine an applicator-specific absorbed dose to water at the treatment surface from the measured air-kerma rate. Additionally, relative dose measurements of the surface dose distributions and characteristic depth dose curves were completed in-phantom. Results: Theoretical dose distributions and depth dose curves were generated for each applicator and agreed well with the measured values. A method of output verification was created that allows users to determine the applicator-specific dose to water at the treatment surface based on a measured air-kerma rate. Conclusions: The novel output verification methods described in this work will reduce uncertainties in dose delivery for treatments with these kinds of surface applicators, ultimately improving patient care.

Fulkerson, Regina K., E-mail: rmkenned@gmail.com; Micka, John A.; DeWerd, Larry A. [Department of Medical Physics, University of WisconsinMadison, Madison, Wisconsin 53705 (United States)] [Department of Medical Physics, University of WisconsinMadison, Madison, Wisconsin 53705 (United States)

2014-02-15T23:59:59.000Z

31

Optimal Waterflood Management under Geologic Uncertainty Using Rate Control: Theory and Field Applications  

E-Print Network [OSTI]

Waterflood optimization via rate control is receiving increased interest because of rapid developments in the smart well completions and I-field technology. The use of inflow control valves (ICV) allows us to optimize the production/injection rates...

Alhuthali, Ahmed Humaid H.

2010-01-16T23:59:59.000Z

32

Dosimetric evaluation of two treatment planning systems for high dose rate brachytherapy applications  

SciTech Connect (OSTI)

Various treatment planning systems are used to design plans for the treatment of cervical cancer using high-dose-rate brachytherapy. The purpose of this study was to make a dosimetric comparison of the 2 treatment planning systems from Varian medical systems, namely ABACUS and BrachyVision. The dose distribution of Ir-192 source generated with a single dwell position was compared using ABACUS (version 3.1) and BrachyVision (version 6.5) planning systems. Ten patients with intracavitary applications were planned on both systems using orthogonal radiographs. Doses were calculated at the prescription points (point A, right and left) and reference points RU, LU, RM, LM, bladder, and rectum. For single dwell position, little difference was observed in the doses to points along the perpendicular bisector. The mean difference between ABACUS and BrachyVision for these points was 1.88%. The mean difference in the dose calculated toward the distal end of the cable by ABACUS and BrachyVision was 3.78%, whereas along the proximal end the difference was 19.82%. For the patient case there was approximately 2% difference between ABACUS and BrachyVision planning for dose to the prescription points. The dose difference for the reference points ranged from 0.4-1.5%. For bladder and rectum, the differences were 5.2% and 13.5%, respectively. The dose difference between the rectum points was statistically significant. There is considerable difference between the dose calculations performed by the 2 treatment planning systems. It is seen that these discrepancies are caused by the differences in the calculation methodology adopted by the 2 systems.

Shwetha, Bondel [Department of Radiation Physics, Kidwai, Memorial Institute of Oncology, Bangalore (India); Ravikumar, Manickam, E-mail: drravikumarm@gmail.com [Department of Radiation Physics, Kidwai, Memorial Institute of Oncology, Bangalore (India); Supe, Sanjay S.; Sathiyan, Saminathan [Department of Radiation Physics, Kidwai, Memorial Institute of Oncology, Bangalore (India); Lokesh, Vishwanath [Department of Radiotherapy, Kidwai, Memorial Institute of Oncology, Bangalore (India); Keshava, Subbarao L. [Department of Radiation Physics, Kidwai, Memorial Institute of Oncology, Bangalore (India)

2012-04-01T23:59:59.000Z

33

ReproducedfromJournalofEnvironmentalQuality.PublishedbyASA,CSSA,andSSSA.Allcopyrightsreserved. Rainfall Timing and Poultry Litter Application Rate Effects  

E-Print Network [OSTI]

JournalofEnvironmentalQuality.PublishedbyASA,CSSA,andSSSA.Allcopyrightsreserved. Rainfall Timing and Poultry Litter Application Rate Effects on Phosphorus Loss in Surface Runoff P. D with poultry runoff from hayfields and pastures (Sharpley et al., 1992).litter may be a significant contributor surface-applied poultry litter and to develop equations ticulate P in runoff (McLeod and Hegg, 1984

Radcliffe, David

34

Discriminating noise from chaos in heart rate variability : application to prognosis in heart failure  

E-Print Network [OSTI]

This thesis examines two challenging problems in chaos analysis: distinguishing deterministic chaos and stochastic (noise-induced) chaos, and applying chaotic heart rate variability (HRV) analysis to the prognosis of ...

Arzeno, Natalia M. (Natalia Mara Arzeno Soltero)

2007-01-01T23:59:59.000Z

35

The Effect of Time and Rate of Application of Nitrate of Soda on the Yield of Cotton.  

E-Print Network [OSTI]

TEXAS AGRICULTURAL EXPERIHENT STATIDJ A. R. CONNER, DIRECTOR COLLEGE STATION, BRAZOS COUNTY. TEXAS BULLETIN NO. 490 MARCH, 1934 .--' --7 , The Effect of Time and Rate of Application of Nitrate of Soda on the Yield of Cotton - AGRICULTURAL... of nitrate of soda on yield, length and percentage of lint, size of boll, shedding, and other characters of the cotton plant on the sandy soils of eastern Texas, as a basis for developing a more intelligent and profitable fertilizer practice for cotton...

Reynolds, E. B. (Elbert Brunner); Langley, B. C. (Bryon Caldwell); Johnson, P. R. (Paul Rufus)

1934-01-01T23:59:59.000Z

36

Measuring Tail Thickness under GARCH and an Application to Extremal Exchange Rate Changes  

E-Print Network [OSTI]

relations and Extremes of a GARCH(1,1) Process, Annals ofMeasuring Tail Thickness under GARCH And an Application todistribution functions including GARCH and propose a model-

Wagner, Niklas; Marsh, Terry A.

2003-01-01T23:59:59.000Z

37

High-rate deformation behavior and applications of fluid filled reticulated foams  

E-Print Network [OSTI]

The need for smarter and adaptive, energy absorption materials especially for human protection applications has fueled the interest in new and alternative energy absorbing composites. In this thesis a 'novel' energy absorbing ...

Bettin, Giorgia

2007-01-01T23:59:59.000Z

38

Using Ex Post Data to Estimate the Hurdle Rate of Abatement Investments -An Application to the Swedish Pulp and Paper Industry  

E-Print Network [OSTI]

Using Ex Post Data to Estimate the Hurdle Rate of Abatement Investments - An Application to Estimate the Hurdle Rate of Abatement Investments - An Application to the Swedish Pulp and Paper Industry in pollution abatement technology, using ex post data. The method is based on a structural option value model

Paris-Sud XI, Université de

39

Condition Data Aggregation with Application to Failure Rate Calculation of Power Transformers  

E-Print Network [OSTI]

be used in system-level simulation and decision tools. The system is illustrated using dis- solved gas-in-oil for condition monitoring and failure rate prediction of power transformers. Specif- ically, the system uses field data for assessing the deteriora- tion level of power transformer insulating oil. Keywords: Data

40

Implicit Rate-Type Models for Elastic Bodies: Development, Integration, Linearization and Application  

E-Print Network [OSTI]

much richer class of models than traditional elasticity wherein the Helmholtz potential is utilized, and the relationship between the stress and stretch is governed by a tensor-valued rate equation. For the special case of an isotropic body, we obtain a...

Bridges, Ronald 1980-

2011-08-02T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Page 1 of 7 PERFORMANCE EVALUATION OF LOW RATE WPANS FOR MEDICAL APPLICATIONS  

E-Print Network [OSTI]

In this article we consider the emerging low-rate wireless personal area network (WPAN) technology as specified on scalability issues and the need to support several communicating devices near a patient's bedside. Given.15.4 devices in the presence of IEEE 802.11b devices since it may be the technology of choice for most web

42

Effect of nitrogen source, rate and time of application on soil nitrogen status and on the characteristics of the plant  

E-Print Network [OSTI]

. They attributed this partly to the rapid hydrolysis of urea to ammoni- um which was then exchangeably sorbed by the soil. Studies by Black (5) indicated more rapid loss of nitrate from coarse than fine textured soils. Research by Greaves et al. (15) indicated... source on the subsoil ammoni- um content on May 16, The influence of nitrogen source, rate and time of application on cotton plant growth. The dry weight of the entire plant on May 30 and the dry weight of the entire plant together...

Sadik, Mohamed Kamal

1962-01-01T23:59:59.000Z

43

High Strain-Rate Mechanical Behaviour of a Copper Matrix Composite for Nuclear Applications  

E-Print Network [OSTI]

Aim of this work is the investigation of mechanical behaviour of an alumina dispersion strengthened copper, known by the trade name GLIDCOP, subjected to dynamic loads: it is a composite material with a copper matrix strengthened with aluminium oxide ceramic particles. Since the particle content is quite small the material keeps the OFE copper physical properties, such as thermal and electrical conductivity, but with a higher yield strength, like a mild-carbon steel. Besides, with the addition of aluminium oxide, the good mechanical properties are retained also at high temperatures and the resistance to thermal softening is increased: the second phase blocks the dislocation movement preventing the grain growth. Thanks to these properties GLIDCOP finds several applications in particle accelerator technologies, where problems of thermal management, combined with structural requirements, play a key role. Currently, it is used for the construction of structural and functional parts of the particle beam collim...

Peroni, L

2012-01-01T23:59:59.000Z

44

DOE Commercial Building Asset Rating: An Application of Centralized Modeling Tools  

SciTech Connect (OSTI)

This paper presents a novel approach used to develop the U.S. Department of Energy (DOE) Commercial Building Asset Rating, which is intended to help building owners better understand the installed system performance and the total energy use. A simplified data collection and energy-modeling method is employed to disaggregate building energy information. Furthermore, the approach outlined will also include a mechanism for identifying energy improvement opportunities. A detailed modeling approach to formulate an Asset Rating would most likely provide the greatest flexibility and accuracy. Such an approach would, however, require a substantial amount of user investment for collecting the energy audit, data and hiring a professional to perform energy modeling and analysis. A simplified model approach requires fewer input combinations, which could reduce opportunities for error and allow an inexperienced user to quickly develop energy models. However, the accuracy of the results is often questionable. To address the above issue, the method presented in this paper separates model inputs into categories based on overall energy impact, difficulty to obtain, and variability among buildings. We outline an approach that will allow great flexibility in terms of how many and which of the different categories of variables must be found to produce an accurate energy model. The approach will allow all key variables to be inferred from some minimum set of variables while at the same time allowing a user to enter many more variables if he or she has reliable values for them. The approach outlined will also provide constant values for some variables and algorithms for finding those which are very difficult to determine in the field. The whole of this approach will reduce modeling time and expertise required while maintaining accuracy and the ability to support the variability and complexity that exist in buildings. Therefore, the goals of facilitating cost-effective investment in energy efficiency and reducing energy use in the commercial building sector are met.

Wang, Na; Gorrissen, Willy J.; Srivastava, Viraj; Taylor, Cody

2012-06-26T23:59:59.000Z

45

ENTOMOLOGY O.B. Kovanci et al. (2005) Phytoparasitica 33(4):334-342 Effects of Application Rate and Interval on the Efficacy of  

E-Print Network [OSTI]

ENTOMOLOGY O.B. Kovanci et al. (2005) Phytoparasitica 33(4):334-342 Effects of Application Rate sustain themselves in apples alone in NC, Received Nov. 22, 2004; accepted March 12, 2005; http://www.phytoparasitica

46

Evaluation of Reaction Rate Theory and Monte Carlo Methods for Application to Radiation-Induced Microstructural Characterization  

SciTech Connect (OSTI)

The multiscale modeling scheme encompasses models from the atomistic to the continuum scale. Phenomena at the mesoscale are typically simulated using reaction rate theory, Monte Carlo, or phase field models. These mesoscale models are appropriate for application to problems that involve intermediate length scales, and timescales from those characteristic of diffusion to long-term microstructural evolution (~?s to years). Although the rate theory and Monte Carlo models can be used simulate the same phenomena, some of the details are handled quite differently in the two approaches. Models employing the rate theory have been extensively used to describe radiation-induced phenomena such as void swelling and irradiation creep. The primary approximations in such models are time- and spatial averaging of the radiation damage source term, and spatial averaging of the microstructure into an effective medium. Kinetic Monte Carlo models can account for these spatial and temporal correlations; their primary limitation is the computational burden which is related to the size of the simulation cell. A direct comparison of RT and object kinetic MC simulations has been made in the domain of point defect cluster dynamics modeling, which is relevant to the evolution (both nucleation and growth) of radiation-induced defect structures. The primary limitations of the OKMC model are related to computational issues. Even with modern computers, the maximum simulation cell size and the maximum dose (typically much less than 1 dpa) that can be simulated are limited. In contrast, even very detailed RT models can simulate microstructural evolution for doses up 100 dpa or greater in clock times that are relatively short. Within the context of the effective medium, essentially any defect density can be simulated. Overall, the agreement between the two methods is best for irradiation conditions which produce a high density of defects (lower temperature and higher displacement rate), and for materials that have a relatively high density of fixed sinks such as dislocations.

Stoller, Roger E [ORNL; Golubov, Stanislav I [ORNL; Becquart, C. S. [Universite de Lille; Domain, C. [EDF R& D, Clamart, France

2007-08-01T23:59:59.000Z

47

HDRMC, an accelerated Monte Carlo dose calculator for high dose rate brachytherapy with CT-compatible applicators  

SciTech Connect (OSTI)

Purpose: To present a new accelerated Monte Carlo code for CT-based dose calculations in high dose rate (HDR) brachytherapy. The new code (HDRMC) accounts for both tissue and nontissue heterogeneities (applicator and contrast medium). Methods: HDRMC uses a fast ray-tracing technique and detailed physics algorithms to transport photons through a 3D mesh of voxels representing the patient anatomy with applicator and contrast medium included. A precalculated phase space file for the{sup 192}Ir source is used as source term. HDRM is calibrated to calculated absolute dose for real plans. A postprocessing technique is used to include the exact density and composition of nontissue heterogeneities in the 3D phantom. Dwell positions and angular orientations of the source are reconstructed using data from the treatment planning system (TPS). Structure contours are also imported from the TPS to recalculate dose-volume histograms. Results: HDRMC was first benchmarked against the MCNP5 code for a single source in homogenous water and for a loaded gynecologic applicator in water. The accuracy of the voxel-based applicator model used in HDRMC was also verified by comparing 3D dose distributions and dose-volume parameters obtained using 1-mm{sup 3} versus 2-mm{sup 3} phantom resolutions. HDRMC can calculate the 3D dose distribution for a typical HDR cervix case with 2-mm resolution in 5 min on a single CPU. Examples of heterogeneity effects for two clinical cases (cervix and esophagus) were demonstrated using HDRMC. The neglect of tissue heterogeneity for the esophageal case leads to the overestimate of CTV D90, CTV D100, and spinal cord maximum dose by 3.2%, 3.9%, and 3.6%, respectively. Conclusions: A fast Monte Carlo code for CT-based dose calculations which does not require a prebuilt applicator model is developed for those HDR brachytherapy treatments that use CT-compatible applicators. Tissue and nontissue heterogeneities should be taken into account in modern HDR brachytherapy planning.

Chibani, Omar, E-mail: omar.chibani@fccc.edu; C-M Ma, Charlie [Fox Chase Cancer Center, Philadelphia, Pennsylvania 19111 (United States)] [Fox Chase Cancer Center, Philadelphia, Pennsylvania 19111 (United States)

2014-05-15T23:59:59.000Z

48

FORMALISM FOR INCLUSION OF MEASURED REACTION CROSS SECTIONS IN STELLAR RATES INCLUDING UNCERTAINTIES AND ITS APPLICATION TO NEUTRON CAPTURE IN THE s-PROCESS  

SciTech Connect (OSTI)

A general formalism to include experimental reaction cross sections into calculations of stellar rates is presented. It also allows us to assess the maximally possible reduction of uncertainties in the stellar rates by experiments. As an example for the application of the procedure, stellar neutron capture reactivities from KADoNiS v0.3 are revised and the remaining uncertainties shown. Many of the uncertainties in the stellar rates are larger than those obtained experimentally. This has important consequences for s-process models and the interpretation of meteoritic data because it allows the rates of some reactions to vary within a larger range than previously assumed.

Rauscher, Thomas [Department of Physics, University of Basel, CH-4056 Basel (Switzerland)

2012-08-10T23:59:59.000Z

49

Application of a unified deformation-rate law to stress relaxation of AISI Type 316 stainless steel. [LMFBR  

SciTech Connect (OSTI)

A unified deformation rate law is presented and its use at describing stress-relaxation in cladding material is examined. An equation is derived based on the classical theory of rate processes for type 316 stainless steel (the reference fuel-cladding material). In this framework, a strain-rate law is evolved from the concept that plastic deformation is controlled by the rate at which dislocations move past obstacles by thermal activation.

DiMelfi, R.J.

1983-01-01T23:59:59.000Z

50

On a novel rate theory for transport in narrow ion channels and its application to the study of flux optimization via geometric effects  

E-Print Network [OSTI]

On a novel rate theory for transport in narrow ion channels and its application to the study passage time to describe single-ion conduction in narrow, effectively one-dimensional membrane channels. DOI: 10.1063/1.3077205 I. INTRODUCTION Ion channels are membrane proteins which enable se- lected ions

Reingruber, Jürgen

51

Application of Multi-rate Flowing Fluid Electric ConductivityLogging Method to Well DH-2, Tono Site, Japan  

SciTech Connect (OSTI)

The flowing fluid electric conductivity (FEC) logging method, wellbore fluid is replaced with de-ionized water, following which FEC profiles in the wellbore are measured at a series of times while the well is pumped at a constant rate. Locations were fluid enters the wellbore show peaks in the FEC logs, which may be analyzed to infer inflow strengths and salinities of permeable features intersected by the wellbore. In multi-rate flowing FEC logging, the flowing FEC logging method is repeated using two or more pumping rates, which enables the transmissivities and inherent pressure heads of these features to be estimated as well. We perform multi-rate FEC logging on a deep borehole in fractured granitic rock, using three different pumping rates. Results identify 19 hydraulically conducting fractures and indicate that transmissivity, pressure head, and salinity vary significantly among them. By using three pumping rates rather than the minimum number of two, we obtain an internal consistency check on the analysis that provides a measure of the uncertainty of the results. Good comparisons against static FEC profiles and against independent chemical, geological, and hydrogeological data have further enhanced confidence in the results of the multi-rate flowing FEC logging method.

Doughty, Christine; Takeuchi, Shinji; Amano, Kenji; Shimo, Michito; Tsang, Chin-Fu

2004-10-04T23:59:59.000Z

52

Prediction of net bedload transport rates obtained in oscillating water tunnels and applicability to real surf zone waves  

E-Print Network [OSTI]

Experimental studies of sediment transport rates due to near shore waves are often conducted in oscillating water tunnels (OWTs). In an OWT, the oscillatory motion produced by the piston propagates almost instantaneously ...

Gonzalez-Rodriguez, David

53

Semi-analytical model of brine and CO2 leakage through an abandoned plugged well. Applications for determining an Area of Review and CO2 leakage rate  

E-Print Network [OSTI]

Semi-analytical model of brine and CO2 leakage through an abandoned plugged well. Applications for determining an Area of Review and CO2 leakage rate Arnaud Réveillère, Jérémy Rohmer, Frédéric Wertz / contact the leak, and of CO2,g as a first approach. Compared to the state of the art, it adds the possibility

Paris-Sud XI, Université de

54

Influence of application methods and varying rates of uniconazol on the vegetative and reproductive response of pecan trees, Carya illinoensis (Wang) K. Koch  

E-Print Network [OSTI]

INFLUENCE OF APPLICATION METHODS AND VARYING RATES OF UNICONAZOL ON THE VEGETATIVE AND REPRODUCTIVE RESPONSE OF PECAN ~, Carye illinoertsis (Wang) K Koch A Thesis CHARLES JORDAN GRAHAM Submitted to the OIIice of Graduate Studies of Texas A..., Carya illinoensis (Wang) K. Koch A Thesis CHARLES JORDAN GRAHAM Approved as to style and content by: J. enton Storey (Chairman of Committee) eorge y McEachern (Member) anklin ong (Member) David Wm. Reed (Head of Department) May 1990 ABSTRACT...

Graham, Charles Jordan

1990-01-01T23:59:59.000Z

55

A Study of Strain Rate Effects for Turbulent Premixed Flames with Application to LES of a Gas Turbine Combustor Model  

DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

Large-scale strain rate field, a resolved quantity which is easily computable in large-eddy simulations (LES), could have profound effects on the premixed flame properties by altering the turbulent flame speed and inducing local extinction. The role of the resolved strain rate has been investigated in a posterior LES study of GE lean premixed dry low NOx emissions LM6000 gas turbine combustor model. A novel approach which is based on the coupling of the lineareddy model with a one-dimensional counter-flow solver has been applied to obtain the parameterizations of the resolved premixed flame properties in terms of the reactive progress variable, the local strain rate measure, and local Reynolds and Karlovitz numbers. The strain rate effects have been analyzed by comparing LES statistics for several models of the turbulent flame speed, i.e, with and without accounting for the local strain rate effects, with available experimental data. The sensitivity of the simulation results to the inflow velocity conditions as well as the grid resolution have been also studied. Overall, the results suggest the necessity to represent the strain rate effects accurately in order to improve LES modeling of the turbulent flame speed.

Kemenov, Konstantin A.; Calhoon, William H.

2015-03-24T23:59:59.000Z

56

ESTIMATION OF RADIOLYTIC GAS GENERATION RATE FOR CYLINDRICAL RADIOACTIVE WASTE PACKAGES - APPLICATION TO SPENT ION EXCHANGE RESIN CONTAINERS  

SciTech Connect (OSTI)

Radioactive waste packages containing water and/or organic substances have the potential to radiolytically generate hydrogen and other combustible gases. Typically, the radiolytic gas generation rate is estimated from the energy deposition rate and the radiolytic gas yield. Estimation of the energy deposition rate must take into account the contributions from all radionuclides. While the contributions from non-gamma emitting radionuclides are relatively easy to estimate, an average geometry factor must be computed to determine the contribution from gamma emitters. Hitherto, no satisfactory method existed for estimating the geometry factors for a cylindrical package. In the present study, a formulation was developed taking into account the effect of photon buildup. A prototype code, called PC-CAGE, was developed to numerically solve the integrals involved. Based on the selected dimensions for a cylinder, the specified waste material, the photon energy of interest and a value for either the absorption or attenuation coefficient, the code outputs values for point and average geometry factors. These can then be used to estimate the internal dose rate to the material in the cylinder and hence to calculate the radiolytic gas generation rate. Besides the ability to estimate the rates of radiolytic gas generation, PC-CAGE can also estimate the dose received by the container material. This is based on values for the point geometry factors at the surface of the cylinder. PC-CAGE was used to calculate geometry factors for a number of cylindrical geometries. Estimates for the absorbed dose rate in container material were also obtained. The results for Ontario Power Generation's 3 m3 resin containers indicate that about 80% of the source gamma energy is deposited internally. In general, the fraction of gamma energy deposited internally depends on the dimensions of the cylinder, the material within it and the photon energy; the fraction deposited increases with increasing dimensions of the cylinder and decreases with increasing photon energy.

Husain, A.; Lewis, Brent J.

2003-02-27T23:59:59.000Z

57

A model of the thermal processing of particles in solar nebula shocks: Application to the cooling rates of chondrules  

E-Print Network [OSTI]

A model of the thermal processing of particles in solar nebula shocks: Application to the cooling for the thermal processing of particles in shock waves typical of the solar nebula. This shock model improves are accounted for in their ef fects on the mass, momentum and energy fluxes. Also, besides thermal exchange

Connolly Jr, Harold C.

58

Metabolic Rate Constants for Hydroquinone in F344 Rat and Human Liver Isolated Hepatocytes: Application to a PBPK model.  

SciTech Connect (OSTI)

Hydroquinone (HQ) is an important industrial chemical that also occurs naturally in foods and in the leaves and bark of a number of plant species. Exposure of laboratory animals to HQ may result in a species-, sex-, and strain-specific nephrotoxicity. The sensitivity of male F344 vs. female F344 and Sprague-Dawley rats or B6C3F1 mice appears to be related to differences in the rates of formation and further metabolism of key nephrotoxic metabolites. Metabolic rate constants for the conversion of HQ through several metabolic steps to the mono-glutathione conjugate and subsequent detoxification via mercapturic acid were measured in suspension cultures of hepatocytes isolated from male F344 rats and humans. An in vitro mathematic kinetic model was used to analyze each metabolic step by simultaneously fitting the disappearance of each substrate and the appearance of subsequent metabolites. An iterative, nested approach was used whereby downstream metabolites were considered first and the model was constrained by the requirement that rate constants determined during analysis of individual metabolic steps must also satisfy the complete, integrated metabolism scheme, including competitive pathways. The results from this study indicated that the overall capacity for metabolism of HQ and its mono-glutathione conjugate is greater in hepatocytes from humans than those isolated from rats, suggesting a greater capacity for detoxification of the glutathione conjugates. Metabolic rate constants were applied to an existing physiologically based pharmacokinetic model and the model was used to predict total glutathione metabolites produced in the liver. The results showed that body burdens of these metabolites will be much higher in rats than humans.

Poet, Torka S.; Wu, Hong; English, J C.; Corley, Rick A.

2004-11-15T23:59:59.000Z

59

Dosimetric Comparison of 3-Dimensional Planning Techniques Using an Intravaginal Multichannel Balloon Applicator for High-Dose-Rate Gynecologic Brachytherapy  

SciTech Connect (OSTI)

Purpose: To study the dosimetric differences of various channel combinations of the Capri vaginal applicator. Methods and Materials: The Capri consists of a single central channel (R1), an inner array of 6 channels (R2), and an outer array of 6 channels (R3). Three-dimensional plans were simulated for 6 channel arrangements (R1, R2, R12, R13, R23, and R123). Treatment plans were optimized to the applicator surface or 5-mm depth while minimizing dose to organs at risk (OARs: bladder, rectum, sigmoid, and urethra). The clinical target volume (CTV) was defined as a 5-mm circumferential shell extending 4 cm in length around the applicator. Clinical target volume coverage (D{sub mean}, D{sub 90}, V{sub 100}, and V{sub 150}) and OAR doses (D{sub 0.1} {sub cm{sup 3}}, D{sub 1} {sub cm{sup 3}}, D{sub 2} {sub cm{sup 3}}, and D{sub mean}) were compared. A comparison between the Capri (R123) and a conventional single-channel applicator was also done. Statistical significance (P value <.05) was evaluated with a 2-tailed t test. Results: When prescribing to 5-mm depth, CTV coverage using all 13 channels (R123) versus a single channel (R1) was similar; however, when prescribing to the surface there were differences (P<.0001) in all CTV metrics except for the V{sub 150}. The R1 plans had higher doses to all OARs compared with R123 plans (P<.007). Doses to OARs were not significantly different between R23 and R123 plans (P=.05-.95), and CTV coverage differences were on the order of 1%. Capri R123 plans provided slightly lower CTV D{sub 90} and D{sub mean} but equivalent OAR doses with smaller standard deviations compared with conventional cylinder plans for both prescriptions. Conclusions: The Capri multichannel applicator provides equivalent target coverage at 5-mm depth, with significantly reduced dose to OARs relative to using a single channel. Optimal plans can be achieved using R12 (lowest V{sub 150}) or R123 or R23 (lowest OAR doses)

Park, Sang-June, E-mail: spark@mednet.ucla.edu; Chung, Melody; Demanes, D. Jeffrey; Banerjee, Robyn; Steinberg, Michael; Kamrava, Mitchell

2013-11-15T23:59:59.000Z

60

Absorption, translocation and accumulation of arsenic in cotton and Johnsongrass as influenced by rate, surfactants, and time of application of methanearsonate herbicides  

E-Print Network [OSTI]

. suppressed regrowth of Johnsongrass (So~rhum h 1 o (L. ) P . ) 'h t did *t 1* ly *ff. t y*. ttt (G~s ?1 hl ts L. ). DS!(X and It'. Si'L(A are the sodium salts of' methanearsonic acid. (Y~) ~ L)~ is a water-soluble pentavalent organic arsenical acid which...ABSOPPTION, TRANSLOCATIGN AND ACCUPiULATIGN OF ARSENIC IN COTTGN AND JOHNSONGRASS AS INFLUENCED BY RATE, SUPFACTAiNTS, AND TIiZ 0: APPLICATION GP FXTHANEARSONATE HERBICIDES A Thesis ULYSSES D. HAVZLKA Subaltt d to the Graduate Collepe...

Havelka, Ulysses Daniel

1969-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Rate Schedules  

Broader source: Energy.gov [DOE]

One of the major responsibilities of Southeastern is to design, formulate, and justify rate schedules. Repayment studies prepared by the agency determine revenue requirements and appropriate rate...

62

Energy Rating  

E-Print Network [OSTI]

Consistent, accurate, and uniform ratings based on a single statewide rating scale Reasonable estimates of potential utility bill savings and reliable recommendations on cost-effective measures to improve energy efficiency Training and certification procedures for home raters and quality assurance procedures to promote accurate ratings and to protect consumers Labeling procedures that will meet the needs of home buyers, homeowners, renters, the real estate industry, and mortgage lenders with an interest in home energy ratings

Cabec Conference; Rashid Mir P. E

2009-01-01T23:59:59.000Z

63

ValUQWorkflowInCASL-RiderFinal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500II FieldVacancy-Induced Nanoscale WireSchneider

64

Energy Rating  

E-Print Network [OSTI]

California Home Energy Audit shall be completed for a home only if it is completed as specified by these regulations and the HERS Technical Manual. Scope and Application

California Home

2008-01-01T23:59:59.000Z

65

On the Rate Distribution Analysis of Kinetic Data Using the Maximum Entropy Method: Applications to Myoglobin Relaxation on the Nanosecond and Femtosecond Timescales  

E-Print Network [OSTI]

, Massachusetts 02115 ReceiVed: December 31, 2000; In Final Form: April 27, 2001 We discuss the application distributions of protein conformational substates. As an experimental example, we present an MEM analysis

Kumar, Anand T.N.

66

National Utility Rate Database: Preprint  

SciTech Connect (OSTI)

When modeling solar energy technologies and other distributed energy systems, using high-quality expansive electricity rates is essential. The National Renewable Energy Laboratory (NREL) developed a utility rate platform for entering, storing, updating, and accessing a large collection of utility rates from around the United States. This utility rate platform lives on the Open Energy Information (OpenEI) website, OpenEI.org, allowing the data to be programmatically accessed from a web browser, using an application programming interface (API). The semantic-based utility rate platform currently has record of 1,885 utility rates and covers over 85% of the electricity consumption in the United States.

Ong, S.; McKeel, R.

2012-08-01T23:59:59.000Z

67

High repetition rate fiber lasers  

E-Print Network [OSTI]

This thesis reports work in high repetition rate femtosecond fiber lasers. Driven by the applications including optical arbitrary waveform generation, high speed optical sampling, frequency metrology, and timing and frequency ...

Chen, Jian, Ph. D. Massachusetts Institute of Technology

2009-01-01T23:59:59.000Z

68

Rate schedule  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor. |INCIDENCET3PACI-T3Rate

69

Slepian-Wolf coded nested quantization (SEC-NQ) for Wyner-Ziv coding: high-rate performance analysis, code design, and application to cooperative networks  

E-Print Network [OSTI]

exploits the correlation between two signals (one is the source and the other is the side information) and thus makes it possible to encode the source signal alone and to decode it jointly with the help of the side information at the decoder. Nested lattice... quantization provides a practical scheme for Wyner-Ziv cod- ing. We examine the high-rate performance of nested lattice quantizers and give the theoretical performance for general continuous sources. Based on our analysis, a new practical Wyner-Ziv coding...

Liu, Zhixin

2009-05-15T23:59:59.000Z

70

Calculation of Auger rates in a quantum well structure and its application to InGaAsP quantum well lasers  

SciTech Connect (OSTI)

We discuss the possible intrinsic limitation on the temperature dependence of threshold current of long wavelength InGaAsP quantum well lasers caused by Auger recombination and intervalence band absorption. A model calculation of the various band-to-band Auger rates are presented. We find that the Auger rates increase with decreasing band gap and also with increasing temperature as in the case of bulk semiconductors. The temperature dependence and the band-gap dependence arises from the energy and momentum conservation (in the direction normal to the well) that the four particle states involved must satisfy. The estimated Auger coefficient is large enough to be important in single quantum well lasers. However, the Auger effect should be much smaller in a multiquantum well laser than for a single quantum well laser. This is because the carrier density at threshold is smaller (by a factor of 3 to 4) for multiquantum well lasers than for single quantum well lasers. The increased intervalence band absorption with increasing temperature in the active layer may not be responsible for increased threshold current of single quantum well lasers.

Dutta, N.K.

1983-03-01T23:59:59.000Z

71

High rate resistive plate chambers: An inexpensive, fast, large area detector of energetic charged particles for accelerator and non-accelerator applications  

SciTech Connect (OSTI)

Resistive Plate Chambers, or RPCs, have been used until recently as large detectors of cosmic ray muons. They are now finding use as fast large-area trigger and muon detection systems for different high energy physics detectors such the L3 Detector at LEP and future detectors to be built at the Superconducting Super Collider (SSC) and at the Large Hadron Collider (LHC) at CERN. RPC systems at these accelerators must operate with high efficiency, providing nanosecond timing resolution in particle fluences up to a few tens of kHz/cm{sup 2} -- with thousands of square meters of active area. RPCs are simple and cheap to construct. The authors report here recent work on RPCs using new materials that exhibit a combination of desirable RPC features such as low bulk resistivity, high dielectric strength, low mass, and low cost. These new materials were originally developed for use in electronics assembly areas and other applications, where static electric charge buildup can damage sensitive electrical systems.

Wuest, C.R.; Ables, E.; Bionta, R.M.; Clamp, O.; Haro, M.; Mauger, G.J.; Miller, K.; Olson, H.; Ramsey, P.

1993-05-01T23:59:59.000Z

72

2007 Wholesale Power Rate Schedules : 2007 General Rate Schedule Provisions.  

SciTech Connect (OSTI)

This schedule is available for the contract purchase of Firm Power to be used within the Pacific Northwest (PNW). Priority Firm (PF) Power may be purchased by public bodies, cooperatives, and Federal agencies for resale to ultimate consumers, for direct consumption, and for Construction, Test and Start-Up, and Station Service. Rates in this schedule are in effect beginning October 1, 2006, and apply to purchases under requirements Firm Power sales contracts for a three-year period. The Slice Product is only available for public bodies and cooperatives who have signed Slice contracts for the FY 2002-2011 period. Utilities participating in the Residential Exchange Program (REP) under Section 5(c) of the Northwest Power Act may purchase Priority Firm Power pursuant to the Residential Exchange Program. Rates under contracts that contain charges that escalate based on BPA's Priority Firm Power rates shall be based on the three-year rates listed in this rate schedule in addition to applicable transmission charges. This rate schedule supersedes the PF-02 rate schedule, which went into effect October 1, 2001. Sales under the PF-07 rate schedule are subject to BPA's 2007 General Rate Schedule Provisions (2007 GRSPs). Products available under this rate schedule are defined in the 2007 GRSPs. For sales under this rate schedule, bills shall be rendered and payments due pursuant to BPA's 2007 GRSPs and billing process.

United States. Bonneville Power Administration.

2006-11-01T23:59:59.000Z

73

Chlorite Dissolution Rates  

SciTech Connect (OSTI)

Spreadsheets provides measured chlorite rate data from 100 to 300C at elevated CO2. Spreadsheet includes derived rate equation.

Carroll, Susan

2013-07-01T23:59:59.000Z

74

Chlorite Dissolution Rates  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Spreadsheets provides measured chlorite rate data from 100 to 300C at elevated CO2. Spreadsheet includes derived rate equation.

Carroll, Susan

75

The Interest Rate Conundrum  

E-Print Network [OSTI]

Flows and US Interest Rates, NBER Working Paper No 12560. [Working Paper # 2008 -03 The Interest Rate Conundrum Roger

Craine, Roger; Martin, Vance L.

2009-01-01T23:59:59.000Z

76

Fusion integral experiments and analysis and the determination of design safety factors - II: Application to the prediction uncertainty of tritium production rate from the U.S. DOE/JAERI collaborative program on fusion blanket neutronics  

SciTech Connect (OSTI)

Many fusion integral experiments were performed during the last decade within a well-established collaboration between the United States and Japan on fusion breeder neutronics. The tritium production rate (TPR) has the prime focus among other reactions. The experimental and calculational data sets of local TPR in each experiment were interpolated to give an estimate of the prediction uncertainty, and the standard deviation, of the line-integrated TPR, a quantity that is closely related to the total breeding ratio (TBR) in the test assembly. A novel methodology developed during the collaboration was applied to arrive at estimates to design safety factors that fusion blanket designers can use to ensure that the achievable TBR in a blanket does not fall below a minimum required value. Associated with each safety factor is a confidence level, designers may choose to have, that calculated TPR will not exceed the actual measured value. Higher confidence levels require larger safety factors. Tabular and graphical forms for these factors are given, as derived independently for TPR from Li-6(T{sub 6}), Li-7 (T{sub 7}), and natural lithium (T{sub n}). Furthermore, distinction was made between safety factors based on the technique applied, discrete ordinates methods, and Monte Carlo methods in the U.S. calculations, JAERI`s calculations, and in both calculations considered simultaneously. The derived factors are applicable to TPR in Li{sub 2}O breeding material, 48 refs., 51 figs., 7 tabs.

Youssef, M.Z.; Kumar, A.; Abdou, M.A. [Univ. of California, Los Angeles, CA (United States)] [and others

1995-09-01T23:59:59.000Z

77

Negotiating Rates and Contracts for Qualifying Facilities  

E-Print Network [OSTI]

The implementation of a cogeneration project or other qualifying facility (QF) requires the development of contractual relationships with one or more electric utilities. The relationships may involve the application of existing rates and contracts...

Collier, S. E.

78

Data Fusion for Improved Respiration Rate Estimation  

E-Print Network [OSTI]

We present an application of a modified Kalman-Filter (KF) framework for data fusion to the estimation of respiratory rate from multiple physiological sources which is robust to background noise. A novel index of the ...

Nemati, Shamim

79

Effective Rate Period  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of the FY Mid-Year Change 10012013 - 03312014 04012014 - 09302014 Power Rates Annual Revenue Requirement Rate Schedule Power Revenue Requirement 73,441,557...

80

Evaluating service mitigation proposals for the MBTA Green Line extension construction delay using simplified planning methods .  

E-Print Network [OSTI]

??This thesis reviews a select group of transit environmental mitigation proposals through the application of ridership estimation methodologies. In recent years, rider demands and environmental (more)

Rosen, Jamie C. (Jamie Cara)

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

MHK Technologies/Wave Rider | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay IEOWCCatcher.png Technology

82

SunRider Solar LLC | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty LtdSteen, Minnesota:36052°, -97.6114217°SunEnergy Power

83

Comet Riders--Nuclear nomads to the stars  

SciTech Connect (OSTI)

This paper describes the potential role of an evolutionary family of advanced space nuclear power systems (solid core reactor, gas core reactor, and thermonulcear fusion systems) in the detailed exploration of Solar System comets and in the use of interstellar comes to support migratory journeys to the stars by both human beings and their smart robot systems. 14 refs., 5 figs., 2 tabs.

Angelo, J.A. Jr. (Science Applications International Corp., Melbourne, FL (United States)); Buden, D. (EG and G Idaho, Inc., Idaho Falls, ID (United States))

1991-01-01T23:59:59.000Z

84

2007 Wholesale Power Rate Case Initial Proposal : 2007 Wholesale Power Rate Schedule and General Rate Schedule Provisions.  

SciTech Connect (OSTI)

This schedule is available for the contract purchase of Firm Power to be used within the Pacific Northwest (PNW). Priority Firm (PF) Power may be purchased by public bodies, cooperatives, and Federal agencies for resale to ultimate consumers, for direct consumption, and for Construction, Test and Start-Up, and Station Service. Rates in this schedule are in effect beginning October 1, 2006, and apply to purchases under requirements Firm Power sales contracts for a three-year period. The Slice Product is only available for public bodies and cooperatives who have signed Slice contracts for the FY 2002-2011 period. Utilities participating in the Residential Exchange Program (REP) under Section 5(c) of the Northwest Power Act may purchase Priority Firm Power pursuant to the Residential Exchange Program. Rates under contracts that contain charges that escalate based on BPA's Priority Firm Power rates shall be based on the three-year rates listed in this rate schedule in addition to applicable transmission charges. This rate schedule supersedes the PF-02 rate schedule, which went into effect October 1, 2001. Sales under the PF-07 rate schedule are subject to BPA's 2007 General Rate Schedule Provisions (2007 GRSPs). Products available under this rate schedule are defined in the 2007 GRSPs. For sales under this rate schedule, bills shall be rendered and payments due pursuant to BPA's 2007 GRSPs and billing process.

United States. Bonneville Power Administration.

2005-11-01T23:59:59.000Z

85

Heart Rate Artifact Suppression.  

E-Print Network [OSTI]

??Motion artifact strongly corrupts heart rate measurements in current pulse oximetry systems. In many, almost any motion will greatly diminish the systems ability to extract (more)

Dickson, Christopher

2012-01-01T23:59:59.000Z

86

Residential Solar Valuation Rates  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Residential Solar Valuation Rates Karl R. Rbago Rbago Energy LLC 1 The Ideal Residential Solar Tariff Fair to the utility and non-solar customers Fair compensation to...

87

Effective Rate Period  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

charges or credits associated with the creation, termination, or modification to any tariff, contract, or rate schedule accepted or approved by the Federal Energy Regulatory...

88

LCC Guidance Rates  

Broader source: Energy.gov [DOE]

Notepad text file provides the LCC guidance rates in a numbered format for the various regions throughout the U.S.

89

Previous Power Rates (rates/current)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentations Presentations SortConferences PreviousRates

90

Power Rate Cases (pbl/rates)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006PhotovoltaicSeptember 22,ReactorAbout Power > FinancialPowerRates

91

Power Rates Announcements (pbl/rates)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006PhotovoltaicSeptember 22,ReactorAbout Power > FinancialPowerRates

92

Rates Meetings and Workshops (pbl/rates)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor. |INCIDENCET3PACI-T3Rate

93

2007 Wholesale Power Rate Case Initial Proposal : Wholesale Power Rate Development Study Documentation.  

SciTech Connect (OSTI)

The Documentation for Wholesale Power Rate Development Study (WPRDS) shows the details of the calculation of the proposed rates. It contains the source data, the calculation, and the results. Section 1 contains an overview of the information used and developed in the various models used in the rate development process. Section 2 contains the documentation of the Rate Analysis Model (RAM2007). The RAM2007 is a group of computer applications that performs most of the computations that determine BPA's proposed rates. The output tables of RAM2007 show the source data, calculations (in sequence), and the results (rate charges) of the rate development process. Section 3 provides documentation of revenue forecasts for the 3-year rate test period FY 2007 through FY 2009 at both current and proposed rates and at current rates for the period immediately preceding the rate test period. Section 4 includes supporting data for rate calculations not performed in RAM2007 or revenue analyses. Each section draws data from difference sources and thus tables and/or charts are not always numbered in sequence. For purposes of this document, omitted tables will be listed as such in the Table of Contents.

United States. Bonneville Power Administration

2005-11-01T23:59:59.000Z

94

2007 Wholesale Power Rate Case Final Proposal : Wholesale Power Rate Development Study Documentation, Volume 2.  

SciTech Connect (OSTI)

The Documentation for Wholesale Power Rate Development Study shows the details of the calculation of the proposed rates. It contains the source data, the calculation, and the results. There are 2 Volumes, the first containing Sections 1, 2, and 3; the second containing Section 4 and 3 appendices. Section 1 contains an overview of the information used and developed in the various models used in the rate development process. Section 2 contains the documentation of the Rate Analysis Model (RAM2007). The RAM2007 is a group of computer applications that performs most of the computations that determine BPA's proposed rates. The output tables of RAM2007 show the source data, calculations (in sequence), and the results (rate charges) of the rate development process. Section 3 provides documentation of revenue forecasts for the three-year rate test period FY 2007 through FY 2009 at both current and proposed rates and at current rates for the period immediately preceding the rate test period. Section 4 includes supporting data for rate calculations not performed in RAM2007 or revenue analyses.

United States. Bonneville Power Administration.

2006-07-01T23:59:59.000Z

95

On Thermonuclear Reaction Rates  

E-Print Network [OSTI]

Nuclear reactions govern major aspects of the chemical evolution od galaxies and stars. Analytic study of the reaction rates and reaction probability integrals is attempted here. Exact expressions for the reaction rates and reaction probability integrals for nuclear reactions in the case of nonresonant, modified nonresonant, screened nonresonant and resonant cases are given. These are expressed in terms of H-functions, G-functions and in computable series forms. Computational aspects are also discussed.

H. J. Haubold; A. M. Mathai

1996-12-02T23:59:59.000Z

96

2007 Wholesale Power Rate Case Final Proposal : Section 7(b)(2) Rate Test Study and Documentation.  

SciTech Connect (OSTI)

Section 7(b)(2) of the Pacific Northwest Electric Power Planning and Conservation Act (Northwest Power Act), 16 U.S.C. {section} 839e(b)(2), directs the Bonneville Power Administration (BPA) to conduct, after July 1, 1985, a comparison of the projected rates to be charged its preference and Federal agency customers for their firm power requirements, over the rate test period plus the ensuing 4 years, with the costs of power (hereafter called rates) to those customers for the same time period if certain assumptions are made. The effect of this rate test is to protect BPA's preference and Federal agency customers wholesale firm power rates from certain specified costs resulting from certain provisions of the Northwest Power Act. The rate test can result in a reallocation of costs from the general requirements loads of preference and Federal agency customers to other BPA loads. The rate test involves the projection and comparison of two sets of wholesale power rates for the general requirement loads of BPA's public body, cooperative, and Federal agency customers (collectively, the 7(b)(2) Customers). The two sets of rates are: (1) a set for the test period and the ensuing four years assuming that Section 7(b)(2) is not in effect (known as Program Case rates); and (2) a set for the same period taking into account the five assumptions listed in section 7(b)(2) (known as 7(b)(2) Case rates). Certain specified costs allocated pursuant to section 7(g) of the Northwest Power Act are subtracted from the Program Case rates. Next, each nominal rate is discounted to the beginning of the test period of the relevant rate case. The discounted Program Case rates are averaged, as are the 7(b)(2) Case rates. Both averages are rounded to the nearest tenth of a mill for comparison. If the average of the Program Case rates is greater than the average of the 7(b)(2) Case rates, the rate test triggers. The difference between the average of the Program Case rates and the average of the 7(b)(2) Case rates determines the amount to be reallocated from the 7(b)(2) Customers to other BPA loads in the rate test period. The purpose of this Study is to describe the application of the ''Section 7(b)(2) Implementation Methodology (Implementation Methodology)'' and the results of such application. The accompanying Section 7(b)(2) Rate Test Study Documentation, WP-07-FS-BPA-06A, contains the documentation of the computer models and data used to perform the 7(b)(2) rate test. This Study is organized into three major sections. The first section provides an introduction to the study, as well as a summary of the section ''7(b)(2) Legal Interpretation and Implementation Methodology''. The second section describes the methodology used in conducting the rate test. It provides a discussion of the calculations performed to project the two sets of power rates that are compared in the rate test. The third section presents a summary of the results of the rate test for the WP-07 Final Rate Proposal.

United States. Bonneville Power Administration.

2006-07-01T23:59:59.000Z

97

Rates and Repayment Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor.Tariff Rates FY 2015 Rates

98

2007 Wholesale Power Rate Case Initial Proposal : Direct Testimony.  

SciTech Connect (OSTI)

The purpose of our testimony is to sponsor the rate design portions of Bonneville Power Administration's (BPA) Wholesale Power Rate Development Study (WPRDS), WP-07-E-BPA-05, and associated portions of the Wholesale Power Rate Schedules and GRSPs (WP-07-E-BPA-07). Our testimony is organized in eight sections. The first section outlines the purpose of our testimony. Section 2 describes BPA's Demand Rates, including subsections on the definition of the Demand Rate, the method for computing the Demand Rates, and differences from the currently effective WP-02 Demand Rate. Section 3 describes BPA's Load Variance Rate, with subsections on the definition and purpose of the Load Variance Rate, application of the Load Variance Rate, how the Load Variance Rate is calculated, and the differences from the WP-02 Load Variance Rate. Section 4 describes the steps involved in developing BPA's energy rates and differences from the WP-02 rate case. Section 5 discusses discontinuation of the Stepped Up Multi-Year Block Rate. Section 6 describes a minor change to the Unauthorized Increase Rates and the Excess Factoring Rates. Section 7 describes the Targeted Adjustment Charge. Section 8 addresses the Operating Reserves Credit.

United States. Bonneville Power Administration.

2005-11-01T23:59:59.000Z

99

Pressure Normalization of Production Rates Improves Forecasting Results  

E-Print Network [OSTI]

. However, these new decline curve analysis (DCA) methods are still based only on production rate data, relying on the assumption of stable flowing pressure. Since this stabilized state is not reached rapidly in most cases, the applicability of these methods...

Lacayo Ortiz, Juan Manuel

2013-08-07T23:59:59.000Z

100

astrophysical reaction rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Workshop on Thermonuclear Reaction Rates for Astrophysics Applications Computer Technologies and Information...

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

astrophysical reaction rates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Workshop on Thermonuclear Reaction Rates for Astrophysics Applications Computer Technologies and Information...

102

Plant Disease / October 2001 1113 Effect of Host Plant Resistance and Reduced Rates and Frequencies  

E-Print Network [OSTI]

Plant Disease / October 2001 1113 Effect of Host Plant Resistance and Reduced Rates and Frequencies. These include the use of fungicides with less active ingredient, re- duced application rates, longer application. The frequent fungicide spray intervals and rates currently used by growers to control late blight are expensive

Douches, David S.

103

Growth Rates, Stable Oxygen Isotopes (18O), and Strontium (Sr/Ca) Composition in Two Species of Pacific Sclerosponges (Acanthocheatetes wellsi and Astrosclera willeyana) with 18O Calibration and Application to Paleoceanography  

SciTech Connect (OSTI)

The isotopic and elemental composition of sclerosponge skeletons is used to reconstruct paleoceanographic records. Yet few studies have systematically examined the natural variability in sclerosponge skeletal {delta}{sup 18}O, growth, and Sr/Ca, and how that may influence the interpretation of sclerosponge proxy records. Here, we analyzed short records in seven specimens of Acanthocheatetes wellsi (high-Mg calcite, 21 mol% Mg) from Palau, four A. wellsi (high-Mg calcite, 21 mol% Mg) from Saipan, and three Astrosclera willeyana (aragonite) sclerosponges from Saipan, as well as one long record in an A. wellsi specimen from Palau spanning 1945-2001.5. In Saipan, species-specific and mineralogical effects appear to have a negligible effect on sclerosponge {delta}{sup 18}O, facilitating the direct comparison of {delta}{sup 18}O records between species at a given location. At both sites, A. wellsi {delta}{sup 18}O and growth rates were sensitive to environmental conditions, but Sr/Ca was not sensitive to the same conditions. High-resolution {delta}{sup 18}O analyses confirmed this finding as both A. wellsi and A. willeyana deposited their skeleton in accordance with the trends in isotopic equilibrium with seawater, though with a 0.27{per_thousand} offset in the case of A. willeyana. In the high-Mg-calcite species A. wellsi, Mg may be interfering with Sr incorporation into the skeleton. On multidecadal timescales, A. wellsi sclerosponge {delta}{sup 18}O in Palau tracked the Southern Oscillation Index variability post-1977, but not pre-1977, coincident with the switch in the Pacific Decadal Oscillation (PDO) at {approx}1976. This suggests that water mass circulation in the region is influenced by El Nino-Southern Oscillation variability during positive PDO phases, but not during negative ones.

Grottoli, A.; Adkins, J; Panero, W; Reaman, D; Moots, K

2010-01-01T23:59:59.000Z

104

Interest Rate Clustering in UK Financial Services Markets  

E-Print Network [OSTI]

interest rate setting differs from previous empirical work examining the topic. It has been common1 Interest Rate Clustering in UK Financial Services Markets by John K. Ashton Norwich Business University Business School CCP Working Paper 06-14 Abstract: In applications as diverse as banking

Feigon, Brooke

105

Rates and Repayment Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1PrincipalRare Iron Oxide in AncientRates and

106

Rates and Repayment Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1PrincipalRare Iron Oxide in AncientRates

107

Rating Agency Reports  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor.Tariff Rates FY 2015

108

BCP Annual Rate Process  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScience Program CumulusA t i o nLiquids Reserve2015 BCP Annual Rate

109

Energy Management Through Innovative Rates  

E-Print Network [OSTI]

of energy efficiency in the industrial sector and specific rate design alternatives for doing so....

Williams, M. L.

1982-01-01T23:59:59.000Z

110

Reconfigurable fuzzy logic system for high-frame rate stereovision object tracking.  

E-Print Network [OSTI]

??his study investigates the applicability of fuzzy logic control to high-frame rate stereovision object tracking. The technology developed in this work is based on utilizing (more)

Samarin, Oleg

2008-01-01T23:59:59.000Z

111

Calibrating Pesticide Application Ground Equipment  

E-Print Network [OSTI]

This pocket-sized guide gives step-by-step instructions for calibrating ground sprayers. Tables provide instructions, examples and sample formulas for determining speed of application, flow rate and the amount of pesticide to add to the tank....

Shaw, Bryan W.

2000-07-05T23:59:59.000Z

112

Mass transfer rates in osmotic membranes with application to desalination  

E-Print Network [OSTI]

heartfelt thanks are also intended for nqr wife, Karen, for her patience and assistance in the preparation of this thesis. TABLE OF COlPiENTS PAGE t'~STRACT AC K'NO I!LEDGI IE'NTS . IV I. IST OF TABL. S LIST CF I'IBURES. CNAPTER Z. 1NTRODUCTIOI... unecus1, clthou~h Shen&;cod c. c. imcd they were ecusl. Sherwood (((8) reported?ster flux con tents of from one to four times gr eater for osmosis than f or reverse osmosis, end salt flux constant' of s. pproximately 20 times S& eater. Beni;-s snd...

Drummond, Joseph Charles

1970-01-01T23:59:59.000Z

113

Application of energy release rate principles to compression debonding  

E-Print Network [OSTI]

analyzed. An experimental program employing a polymethylmethacrylate (PMMA) model system was conducted to verify the proposed analytical technique. The model system consisted of a symmetrical beam-column arrangement subjected simultaneously to axial... to axial compressive P and synusetrical side loads P as illustrated in a s Figure 4b. PMMA was selected as the model system material for this investi- gation because it is a clear glassy thermoplastic which enables one to record debond propagation as a...

Poniktera, Christopher Dale

1980-01-01T23:59:59.000Z

114

Applicable Interest Rates for Slice Product (contracts/slice)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout theOFFICEAmes LaboratoryAntonyaAppeals4AppendixApplianceIssued

115

The Inverted Block Rate:The Inverted Block Rate: An Alternative to Flat Rate BillingAn Alternative to Flat Rate Billing  

E-Print Network [OSTI]

The Inverted Block Rate:The Inverted Block Rate: An Alternative to Flat Rate BillingAn Alternative;Inverted Block RateInverted Block Rate 22 IntroductionIntroduction ·· Modern societies rely on electrical collectionMetering and Rate Models facilitate collection #12;Inverted Block RateInverted Block Rate 33 Rate

Hughes, Larry

116

High rate pulse processing algorithms for microcalorimeters  

SciTech Connect (OSTI)

It has been demonstrated that microcalorimeter spectrometers based on superconducting transition-edge-sensor can readily achieve sub-100 eV energy resolution near 100 keV. However, the active volume of a single microcalorimeter has to be small to maintain good energy resolution, and pulse decay times are normally in the order of milliseconds due to slow thermal relaxation. Consequently, spectrometers are typically built with an array of microcalorimeters to increase detection efficiency and count rate. Large arrays, however, require as much pulse processing as possible to be performed at the front end of the readout electronics to avoid transferring large amounts of waveform data to a host computer for processing. In this paper, they present digital filtering algorithms for processing microcalorimeter pulses in real time at high count rates. The goal for these algorithms, which are being implemented in the readout electronics that they are also currently developing, is to achieve sufficiently good energy resolution for most applications while being (a) simple enough to be implemented in the readout electronics and (b) capable of processing overlapping pulses and thus achieving much higher output count rates than the rates that existing algorithms are currently achieving. Details of these algorithms are presented, and their performance was compared to that of the 'optimal filter' that is the dominant pulse processing algorithm in the cryogenic-detector community.

Rabin, Michael [Los Alamos National Laboratory; Hoover, Andrew S [Los Alamos National Laboratory; Bacrania, Mnesh K [Los Alamos National Laboratory; Tan, Hui [XIA-LLC; Breus, Dimitry [XIA-LLC; Henning, Wolfgang [XIA-LLC; Sabourov, Konstantin [XIA-LLC; Collins, Jeff [XAI-LLC; Warburton, William K [XIA-LLC; Dorise, Bertrand [NIST; Ullom, Joel N [NIST; [NON LANL

2009-01-01T23:59:59.000Z

117

Asymptotic Cellular Growth Rate as the Effective Information Utilization Rate  

E-Print Network [OSTI]

We study the average asymptotic growth rate of cells in randomly fluctuating environments. Using a game-theoretic perspective, we show that any response strategy has an asymptotic growth rate, which is the sum of: (i) the maximal growth rate at the worst possible distribution of environments, (ii) relative information between the actual distribution of environments to the worst one, and (iii) information utilization rate which is the information rate of the sensory devices minus the "information dissipation rate", the amount of information not utilized by the cell for growth. In non-stationary environments, the optimal strategy is the time average of the instantaneous optimal strategy and the optimal switching times are evenly spaced in the statistical (Fisher) metric.

Pugatch, Rami; Tlusty, Tsvi

2013-01-01T23:59:59.000Z

118

Sustainable Building Rating Systems Summary  

SciTech Connect (OSTI)

The purpose of this document is to offer information that could be used to compare and contrast sustainable building rating systems.

Fowler, Kimberly M.; Rauch, Emily M.

2006-07-01T23:59:59.000Z

119

Strain rate sensitive constitutive equations  

E-Print Network [OSTI]

1 Computed Constants For Far'ous . Baterials 47 LIST OF FIGURFS Pace Figure I Comparison of Rate Data For Commercially Pure Aluminum Figure 2 Dynamic Loading Regimes 17 Figure 3 Yield Criteria 32 Figure 4 Uni-axial Stress-Strain Rate...

Nelson, Charles Edward

1971-01-01T23:59:59.000Z

120

RECYCLING RATE STUDY Prepared by  

E-Print Network [OSTI]

NATIONAL RECYCLING RATE STUDY Prepared by: Smith, Bucklin and Associates, Inc. Market Research and Statistics Division Chicago, Illinois July 2003 PRINTED ON RECYCLED PAPER #12;BCI RECYCLING RATE STUDY TABLE ....................................................................................................1 II. METHODOLOGY A. Total Pounds of Lead Recycled from Batteries

Laughlin, Robert B.

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Innovative Rates Program. Final report  

SciTech Connect (OSTI)

Title II of the Energy Conservation and Production Act (ECPA) as amended by the Public Utility Regulatory Policies Act (PURPA) provided financial assistance to state utility regulatory commissions, nonregulated electric utilities, and the Tennessee Valley Authority through the Innovative Rates Program. The financial assistance was to be used to plan or carry out electric utility regulatory rate reform initiatives relating to innovative rate structures that encourage conservation of energy, electric utility efficiency and reduced costs, and equitable rates to consumers. The Federal and local objectives of the project are described. Activities planned and accomplishments are summarized for the following: project management, data collection, utility bill evaluation, billing enclosure/mailing evaluation, media program evaluation, display evaluation, rate study sessions evaluation, speakers bureau evaluation, and individual customer contacts. A timetable/milestone chart and financial information are included. (MHR)

Not Available

1982-06-21T23:59:59.000Z

122

Standby Rates for Combined Heat and Power Systems  

SciTech Connect (OSTI)

Improvements in technology, low natural gas prices, and more flexible and positive attitudes in government and utilities are making distributed generation more viable. With more distributed generation, notably combined heat and power, comes an increase in the importance of standby rates, the cost of services utilities provide when customer generation is not operating or is insufficient to meet full load. This work looks at existing utility standby tariffs in five states. It uses these existing rates and terms to showcase practices that demonstrate a sound application of regulatory principles and ones that do not. The paper also addresses areas for improvement in standby rates.

Sedano, Richard [Regulatory Assistance Partnership; Selecky, James [Brubaker & Associates, Inc.; Iverson, Kathryn [Brubaker & Associates, Inc.; Al-Jabir, Ali [Brubaker & Associates, Inc.

2014-02-01T23:59:59.000Z

123

RATES  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1 20115, 2001 Media Contact: Rick FordMarketing

124

RATES  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1 20115, 2001 Media Contact: Rick FordMarketing

125

RATES  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, and 323 K.Office ofMay 8, 2012IndustrialRAPIDDRATES

126

Statistical Methods for Thermonuclear Reaction Rates and Nucleosynthesis Simulations  

E-Print Network [OSTI]

Rigorous statistical methods for estimating thermonuclear reaction rates and nucleosynthesis are becoming increasingly established in nuclear astrophysics. The main challenge being faced is that experimental reaction rates are highly complex quantities derived from a multitude of different measured nuclear parameters (e.g., astrophysical S-factors, resonance energies and strengths, particle and gamma-ray partial widths). We discuss the application of the Monte Carlo method to two distinct, but related, questions. First, given a set of measured nuclear parameters, how can one best estimate the resulting thermonuclear reaction rates and associated uncertainties? Second, given a set of appropriate reaction rates, how can one best estimate the abundances from nucleosynthesis (i.e., reaction network) calculations? The techniques described here provide probability density functions that can be used to derive statistically meaningful reaction rates and final abundances for any desired coverage probability. Examples ...

Iliadis, Christian; Coc, Alain; Timmes, F X; Champagne, Art E

2014-01-01T23:59:59.000Z

127

Supernova rates and stellar populations  

E-Print Network [OSTI]

We discuss the results about the nature of type Ia Supernovae that can be derived by studying their rates in different stellar populations. While the evolution of SN photometry and spectra can constrain the explosion mechanism, the SN rate depends on the progenitor system. We review the current available data on rates as a function of parent galaxy color, morphology, star formation rate, radio luminosity and environment. By studying the variation of the rates with the color of the parent galaxy, a strong evidence was established that type Ia SNe come from both young and old stars. The dependence of the rates with the radio power of the parent galaxy is best reproduced by a bimodal distribution of delay time between the formation of the progenitor and its explosion as a SN. Cluster early-type galaxies show higher type Ia SN rate with respect to field galaxies, and this effect can be due either to traces of young stars or to differences in the delay time distribution.

F. Mannucci

2007-08-03T23:59:59.000Z

128

Sawnee EMC- Solar Photovoltaic Rebate Program  

Broader source: Energy.gov [DOE]

Sawnee EMC offers a rebate of $300 per kilowatt (kW) to residential customers who install photovoltaic (PV) systems that meet the cooperative's [http://www.sawnee.com/Rate%20Pdfs/NEM%20Rider.pdf...

129

Evaluating service mitigation proposals for the MBTA Green Line extension construction delay using simplified planning methods  

E-Print Network [OSTI]

This thesis reviews a select group of transit environmental mitigation proposals through the application of ridership estimation methodologies. In recent years, rider demands and environmental concerns have led many transit ...

Rosen, Jamie C. (Jamie Cara)

2013-01-01T23:59:59.000Z

130

Electric Rate Alternatives to Cogeneration  

E-Print Network [OSTI]

"ELECTRIC RATE ALTERNATIVES TO COGENERATION" K. R. SANDBERG, JR. INDUSTRIAL ACCOUNTS MANAGER - TEXAS GULF STATES UTILITIES COMPANY BEAUMONT, TEXAS ABSTRACT This paper discusses electric rate slternatives to cogeneration for the industrisl... PERSPECTIVE Gulf States Utilities was incorporated in 1925 and is primarily in the business of generating. transmitting and distributing electricity to 555.000 customers in southeast Texas and south Louisiana. The service area extends 350 miles westward...

Sandberg, K. R. Jr.

131

October 2001 - September 2006 Wholesale Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY

132

October 2002 - March 2003 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY6 A2

133

October 2003 - March 2004 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY6

134

October 2004 - March 2005 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY64 -

135

October 2005 - March 2006 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY64

136

Weathering rates of marble in laboratory and outdoor conditions  

SciTech Connect (OSTI)

In the modern urban atmosphere SO{sub 2} and NO{sub 2} attack calcite (CaCO{sub 3}) in marble exposed at rain-sheltered surfaces creating largely gypsum (CaSO{sub 4}{center_dot}2H{sub 2}O) crusts that eventually exfoliate. In combination with CO{sub 2} these gases erode the marble at unsheltered surfaces. the authors report the development of mathematical models to predict the rate of growth of crust and the rate of surface recession. To determine the rate of growth of crust the kinetic rate constant, diffusion rate, and the order of reaction were determined by the application of the shrinking-core model applied to data generated in laboratory experiments. Based on these parameters /and average ambient levels of 10 parts per billion (ppb) SO{sub 2} and 25 ppb NO{sub 2} in Louisville, Ky., the rate of crust formation for this metro area was calculated to be 1.8 {micro}m in the first year. However, the rate of recession was modeled from data obtained by exposing marble slabs to rainfalls. A surface recession of 15 {micro}m/yr was calculated. The models predicted well the rate of growth of crust observed at several sites in Louisville and the predicted surface recession compared well with values reported in the literature.

Yerrapragada, S.S.; Chirra, S.R.; Jaynes, J.H.; Bandyopadhyay, J.K.; Gauri, K.L. [Univ of Louisville, KY (United States); Li, S. [Metro Services Lab., Louisville, KY (United States)

1996-09-01T23:59:59.000Z

137

LEED for Homes Rating System affordablemarket rate multi-family  

E-Print Network [OSTI]

for Future Comfort Load Reduction 50% 60%20% 30% 40% Energy Savings Cost System Intensive Building Envelo pe;Rating System www.usgbc.org/leed/homes #12;LEED for Homes Project Checklist or Scorecard #12;LEED for Homes Project Checklist or Scorecard #12;How the Credit Structure Works Credit #2: Landscaping Intent

Zaferatos, Nicholas C.

138

Incentive Rates- At What Cost?  

E-Print Network [OSTI]

with interruptible services. Instead, I filed "ISB" which was priced slightly above the marginal fuel cost on a time of use basis. Many of the periods of the year the first year that I proposed that rate, the cost of interruptible would have been higher than... forms centers on four issues; cost scope of the topic, so let me describe what I feel based pricing, discrimination, competition between is an incentive rate. My view is likely to strike utilities, and effectiveness. You've already some of you...

Schaeffer, S. C.

139

Direct estimation of decoherence rates  

E-Print Network [OSTI]

The decoherence rate is a nonlinear channel parameter that describes quantitatively the decay of the off-diagonal elements of a density operator in the decoherence basis. We address the question of how to experimentally access such a nonlinear parameter directly without the need of complete process tomography. In particular, we design a simple experiment working with two copies of the channel, in which the registered mean value of a two-valued measurement directly determines the value of the average decoherence rate. No prior knowledge of the decoherence basis is required.

Vladimr Buek; Peter Rapcan; Jochen Rau; Mario Ziman

2012-07-30T23:59:59.000Z

140

Solids flow rate measurement in dense slurries  

SciTech Connect (OSTI)

Accurate and rapid flow rate measurement of solids in dense slurries remains an unsolved technical problem, with important industrial applications in chemical processing plants and long-distance solids conveyance. In a hostile two-phase medium, such a measurement calls for two independent parameter determinations, both by non-intrusive means. Typically, dense slurries tend to flow in laminar, non-Newtonian mode, eliminating most conventional means that usually rely on calibration (which becomes more difficult and costly for high pressure and temperature media). These issues are reviewed, and specific solutions are recommended in this report. Detailed calculations that lead to improved measuring device designs are presented for both bulk density and average velocity measurements. Cross-correlation, chosen here for the latter task, has long been too inaccurate for practical applications. The cause and the cure of this deficiency are discussed using theory-supported modeling. Fluid Mechanics are used to develop the velocity profiles of laminar non-Newtonian flow in a rectangular duct. This geometry uniquely allows the design of highly accurate `capacitive` devices and also lends itself to gamma transmission densitometry on an absolute basis. An absolute readout, though of less accuracy, is also available from a capacitive densitometer and a pair of capacitive sensors yields signals suitable for cross-correlation velocity measurement.

Porges, K.G.; Doss, E.D.

1993-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Evaluation of the application uniformity of subsurface drip distribution systems  

E-Print Network [OSTI]

The goal of this research was to evaluate the application uniformity of subsurface drip distribution systems and the recovery of emitter flow rates. Emission volume in the field, and laboratory measured flow rates were determined for emitters from...

Weynand, Vance Leo

2004-09-30T23:59:59.000Z

142

Fast repetition rate (FRR) flasher  

DOE Patents [OSTI]

A fast repetition rate (FRR) flasher is described suitable for high flash photolysis including kinetic chemical and biological analysis. The flasher includes a power supply, a discharge capacitor operably connected to be charged by the power supply, and a flash lamp for producing a series of flashes in response to discharge of the discharge capacitor. A triggering circuit operably connected to the flash lamp initially ionizes the flash lamp. A current switch is operably connected between the flash lamp and the discharge capacitor. The current switch has at least one insulated gate bipolar transistor for switching current that is operable to initiate a controllable discharge of the discharge capacitor through the flash lamp. Control means connected to the current switch for controlling the rate of discharge of the discharge capacitor thereby to effectively keep the flash lamp in an ionized state between successive discharges of the discharge capacitor. Advantageously, the control means is operable to discharge the discharge capacitor at a rate greater than 10,000 Hz and even up to a rate greater than about 250,000 Hz. 14 figs.

Kolber, Z.; Falkowski, P.

1997-02-11T23:59:59.000Z

143

Instability statistics and mixing rates  

E-Print Network [OSTI]

We claim that looking at probability distributions of \\emph{finite time} largest Lyapunov exponents, and more precisely studying their large deviation properties, yields an extremely powerful technique to get quantitative estimates of polynomial decay rates of time correlations and Poincar\\'e recurrences in the -quite delicate- case of dynamical systems with weak chaotic properties.

Roberto Artuso; Cesar Manchein

2009-10-20T23:59:59.000Z

144

Renewal Application  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Renewal Individual Permit Renewal Application The Permit expires March 31, 2014 and existing permit conditions will be in effect until a new permit is issued. The Permittees...

145

High frame rate CCD camera with fast optical shutter  

SciTech Connect (OSTI)

A high frame rate CCD camera coupled with a fast optical shutter has been designed for high repetition rate imaging applications. The design uses state-of-the-art microchannel plate image intensifier (MCPII) technology fostered/developed by Los Alamos National Laboratory to support nuclear, military, and medical research requiring high-speed imagery. Key design features include asynchronous resetting of the camera to acquire random transient images, patented real-time analog signal processing with 10-bit digitization at 40--75 MHz pixel rates, synchronized shutter exposures as short as 200pS, sustained continuous readout of 512 x 512 pixels per frame at 1--5Hz rates via parallel multiport (16-port CCD) data transfer. Salient characterization/performance test data for the prototype camera are presented, temporally and spatially resolved images obtained from range-gated LADAR field testing are included, an alternative system configuration using several cameras sequenced to deliver discrete numbers of consecutive frames at effective burst rates up to 5GHz (accomplished by time-phasing of consecutive MCPII shutter gates without overlap) is discussed. Potential applications including dynamic radiography and optical correlation will be presented.

Yates, G.J.; McDonald, T.E. Jr. [Los Alamos National Lab., NM (United States); Turko, B.T. [Lawrence Berkeley National Lab., CA (United States)

1998-09-01T23:59:59.000Z

146

Statistical Methods for Thermonuclear Reaction Rates and Nucleosynthesis Simulations  

E-Print Network [OSTI]

Rigorous statistical methods for estimating thermonuclear reaction rates and nucleosynthesis are becoming increasingly established in nuclear astrophysics. The main challenge being faced is that experimental reaction rates are highly complex quantities derived from a multitude of different measured nuclear parameters (e.g., astrophysical S-factors, resonance energies and strengths, particle and gamma-ray partial widths). We discuss the application of the Monte Carlo method to two distinct, but related, questions. First, given a set of measured nuclear parameters, how can one best estimate the resulting thermonuclear reaction rates and associated uncertainties? Second, given a set of appropriate reaction rates, how can one best estimate the abundances from nucleosynthesis (i.e., reaction network) calculations? The techniques described here provide probability density functions that can be used to derive statistically meaningful reaction rates and final abundances for any desired coverage probability. Examples are given for applications to s-process neutron sources, core-collapse supernovae, classical novae, and big bang nucleosynthesis.

Christian Iliadis; Richard Longland; Alain Coc; F. X. Timmes; Art E. Champagne

2014-09-19T23:59:59.000Z

147

Properties of water surface discharge at different pulse repetition rates  

SciTech Connect (OSTI)

The properties of water surface discharge plasma for variety of pulse repetition rates are investigated. A magnetic pulse compression (MPC) pulsed power modulator able to deliver pulse repetition rates up to 1000?Hz, with 0.5?J per pulse energy output at 25?kV, was used as the pulsed power source. Positive pulse with a point-to-plane electrode configuration was used for the experiments. The concentration and production yield of hydrogen peroxide (H{sub 2}O{sub 2}) were quantitatively measured and orange II organic dye was treated, to evaluate the chemical properties of the discharge reactor. Experimental results show that the physical and chemical properties of water surface discharge are not influenced by pulse repetition rate, very different from those observed for under water discharge. The production yield of H{sub 2}O{sub 2} and degradation rate per pulse of the dye did not significantly vary at different pulse repetition rates under a constant discharge mode on water surface. In addition, the solution temperature, pH, and conductivity for both water surface and underwater discharge reactors were measured to compare their plasma properties for different pulse repetition rates. The results confirm that surface discharge can be employed at high pulse repetition rates as a reliable and advantageous method for industrial and environmental decontamination applications.

Ruma,; Yoshihara, K. [Graduate School of Science and Technology, Kumamoto University, Kumamoto 860-8555 (Japan); Hosseini, S. H. R., E-mail: hosseini@kumamoto-u.ac.jp; Sakugawa, T.; Akiyama, H. [Graduate School of Science and Technology, Kumamoto University, Kumamoto 860-8555 (Japan); Institute of Pulsed Power Science, Kumamoto University, Kumamoto 860-8555 (Japan); Akiyama, M. [Department of Electrical and Electronic Engineering, Kagoshima University, Kagoshima 890-0065 (Japan); Luke, P. [Institute of Plasma Physics, AS CR, Prague, Prague 18200 (Czech Republic)

2014-09-28T23:59:59.000Z

148

High repetition rate mode-locked erbium-doped fiber lasers with complete electric field control  

E-Print Network [OSTI]

Recent advances in fully-stabilized mode-locked laser systems are enabling many applications, including optical arbitrary waveform generation (OAWG). In this thesis work, we describe the development of high repetition-rate ...

Sickler, Jason William, 1978-

2008-01-01T23:59:59.000Z

149

Quantum corrections to classical evaluation of nonadiabatic transition rates  

SciTech Connect (OSTI)

A recently developed quantum correction approach is applied to evaluating the nonadiabatic quantum-mechanical transition rate between Born-Oppenheimer states of a subsystem embedded in a thermal bath of harmonic oscillators. In the first-order perturbation theory, the nonadiabatic rate can be expressed in terms of a quantum-mechanical correlation function, which can be estimated directly from classical data. Application to a popular spin-boson model shows that our results are in excellent agreement with the exact quantum-mechanical results.

Kim, Hyojoon; Rossky, Peter J. [Chemical Physics Theory Group, Department of Chemistry, University of Toronto, Toronto, Ontario M5S 3H6 (Canada); Institute for Theoretical Chemistry, Department of Chemistry and Biochemistry, University of Texas at Austin, Austin, Texas 78712 (United States)

2006-08-14T23:59:59.000Z

150

Illite Dissolution Rates and Equation (100 to 280 dec C)  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The objective of this suite of experiments was to develop a useful kinetic dissolution expression for illite applicable over an expanded range of solution pH and temperature conditions representative of subsurface conditions in natural and/or engineered geothermal reservoirs. Using our new data, the resulting rate equation is dependent on both pH and temperature and utilizes two specific dissolution mechanisms (a neutral and a basic mechanism). The form of this rate equation should be easily incorporated into most existing reactive transport codes for to predict rock-water interactions in EGS shear zones.

Carroll, Susan

151

Illite Dissolution Rates and Equation (100 to 280 dec C)  

SciTech Connect (OSTI)

The objective of this suite of experiments was to develop a useful kinetic dissolution expression for illite applicable over an expanded range of solution pH and temperature conditions representative of subsurface conditions in natural and/or engineered geothermal reservoirs. Using our new data, the resulting rate equation is dependent on both pH and temperature and utilizes two specific dissolution mechanisms (a neutral and a basic mechanism). The form of this rate equation should be easily incorporated into most existing reactive transport codes for to predict rock-water interactions in EGS shear zones.

Carroll, Susan

2014-10-17T23:59:59.000Z

152

Entropy production rate as a constraint for collisionless fluid closures  

SciTech Connect (OSTI)

A novel method is proposed to construct collisionless fluid closures accounting for some kinetic properties. The first dropped fluid moment is assumed to be a linear function of the lower order ones. Optimizing the agreement between the fluid and kinetic entropy production rates is used to constrain the coefficients of the linear development. This procedure is applied to a reduced version of the interchange instability. The closure, involving the absolute value of the wave vector, is non-local in real space. In this case, the linear instability thresholds are the same, and the linear growth rates exhibit similar characteristics. Such a method is applicable to other models and classes of instabilities.

Fleurence, E.; Sarazin, Y.; Garbet, X.; Dif-Pradalier, G.; Ghendrih, Ph.; Grandgirard, V.; Ottaviani, M. [Association Euratom-CEA, CEA/DSM/DRFC Cadarache, 13108 Saint-Paul-Lez-Durance (France)

2006-11-30T23:59:59.000Z

153

Analog Readout and Analysis Software for the Ultra-High Rate Germanium (UHRGe) Project  

SciTech Connect (OSTI)

High-resolution high-purity germanium (HPGe) spectrometers are needed for Safeguards applications such as spent fuel assay and uranium hexafluoride cylinder verification. In addition, these spectrometers would be applicable to other high-rate applications such as non-destructive assay of nuclear materials using nuclear resonance fluorescence. Count-rate limitations of today's HPGe technologies, however, lead to concessions in their use and reduction in their efficacy. Large-volume, very high-rate HPGe spectrometers are needed to enable a new generation of nondestructive assay systems. The Ultra-High Rate Germanium (UHRGe) project is developing HPGe spectrometer systems capable of operating at unprecedented rates, 10 to 100 times those available today. This report documents current status of developments in the analog electronics and analysis software.

Fast, James E.; Aguayo Navarrete, Estanislao; Evans, Allan T.; VanDevender, Brent A.; Rodriguez, Douglas C.; Wood, Lynn S.

2011-09-01T23:59:59.000Z

154

CALIFORNIA ENERGY COMMISSION Loan Application Announcement  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION Loan Application Announcement April 2007 3.2 % Interest Rate Energy subjected to comprehensive research, development and demonstration efforts under commercial working conditions. These efforts have been funded by the Energy Commission's Public Interest Energy Research Program

155

Interviewer's ratings of personality: can these ratings predict job performance?  

E-Print Network [OSTI]

; Goldberg, 1993a; Guastello, 1993; McCrae k Costa, 1985; McCrae & John, 1992) has been about the validity of the five-factor model as a measure of personality; in other words, does the model truly capture all traits of personality? The five-factor model...; Goldberg, 1981; McCrae & Costa, 1987; McCrae & John, 1992; Peabody & Goldberg, 1989). Tupes and Christal (1958, 1992) were the first to look at peer ratings of personality in a variety of samples. Although these samples varied in length and kind...

Archuleta, Kathryn Diane

2012-06-07T23:59:59.000Z

156

WP-07 Rate Case Workshops (rates/meetings)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudhaSurface.Laboratory30,WP-07 power rates On July

157

April - September 2002 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout theOFFICEAmesApplication2 (CRAC 2 period) "Monthly

158

April - September 2003 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout theOFFICEAmesApplication2 (CRAC 2 period) "Monthly3 (CRAC 4

159

April - September 2004 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout theOFFICEAmesApplication2 (CRAC 2 period) "Monthly3 (CRAC 44

160

April - September 2005 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout theOFFICEAmesApplication2 (CRAC 2 period) "Monthly3 (CRAC

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

A CODEC for low to medium bit-rate video  

E-Print Network [OSTI]

(Members J. W. Howze (Head of Department) May 1990 A CODEC for Low to Medium Bit-rate Video. (May 1990) Victor Byron Taylor, B. S. , Texas A&M University; Chair of Advisory Committee: Dr. Jerry Gibson The compensated lattice quantizer (COMLAQ), is a... source coder/decoder (CODEC) designed for limited-motion videoconferencing applications. Our CODEC is based on four data compression strategies: lattice vector quantization, DPCM, transform coding, and simple interl'rame motion compensation. Designed...

Taylor, Victor Byron

1990-01-01T23:59:59.000Z

162

Property:OpenEI/UtilityRate/DemandRateStructure/Tier3Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation Rate

163

Property:OpenEI/UtilityRate/EnergyRateStructure/Tier5Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to: navigation, search This is aInformation Rate

164

Property:OpenEI/UtilityRate/EnergyRateStructure/Tier6Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to: navigation, search This isInformation Rate Jump

165

Direct retrieval of stratospheric CO2 infrared cooling rate profiles from AIRS data  

E-Print Network [OSTI]

of heating and cooling may be warranted. The largest infrared cooling takes place in the stratosphereDirect retrieval of stratospheric CO2 infrared cooling rate profiles from AIRS data D. R. Feldman,1 infrared cooling rate profiles, originally developed by Liou and Xue (1988) through application

Liou, K. N.

166

Upper Great Plains Rates information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlongUpdates by Diane Johnson Email Alerts SubscribeRates

167

Rate Adjustments and Public Involvement  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor. | EMSLusingRate

168

Previous Announcements (rates/fc)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FOR IMMEDIATEPreviewing the 2011 RenewableRates >

169

Aspects of coal pyrogenation with high heating rates  

SciTech Connect (OSTI)

The present paper describes the conversion of different rank coals into coke of required quality, influenced by heating rate variation. The study has been made for romanian coals and the imported coals too. Theoretical aspects of the coking process kinetics with special practical applications are shown. In Romania, classical coke making technology involves some theoretical and practical problems because of the local coal supply, weak in coking coals. Petrographical methods, as a complementary source of information for coking mechanisms understanding were used, for blends with high content of weakly coking coals. The results reveal the importance of rank and petrographical composition determinations for complex blends making. The paper continues previous studies of coke making kinetics, influenced by heating rate variation. On the basis of the relationship between coal charge composition and coke structure, including its use in the blast furnace, the influence of an increase in heating rate on the structure of the coke produced from different rank and petrographical composition coals, was studied. The heating rates ranged between 3 and 40 C/min. The structural changes produced during pyrogenation were more evident for the heating rates: 3, 6, 10 and 40 C/min. Table 2 reveals the optical aspects of coke matrix and inertinitic inclusions evolution, that is, the differences in structure arrangement by changing the plastic phase characteristics due to the increase in the heating rate.

Panaitescu, C.; Barca, F. [Politehnica Univ., Bucharest (Romania); Predeanu, G.; Albastroiu, P. [Metallurgical Research Inst., Bucharest (Romania)

1994-12-31T23:59:59.000Z

170

Renewal convergence rates and correlation decay for homogeneous pinning models  

E-Print Network [OSTI]

A class of discrete renewal processes with super-exponentially decaying inter-arrival distributions coincides with the infinite volume limit of general homogeneous pinning models in their localized phase. Pinning models are statistical mechanics systems to which a lot of attention has been devoted both for their relevance for applications and because they are solvable models exhibiting a non-trivial phase transition. The spatial decay of correlations in these systems is directly mapped to the speed of convergence to equilibrium for the associated renewal processes. We show that close to criticality, under general assumptions, the correlation decay rate, or the renewal convergence rate, coincides with the inter-arrival decay rate. We also show that, in general, this is false away from criticality. Under a stronger assumption on the inter-arrival distribution we establish a local limit theorem, capturing thus the sharp asymptotic behavior of correlations.

Giambattista Giacomin

2007-06-03T23:59:59.000Z

171

Rate constants for charge transfer across semiconductor-liquid interfaces  

SciTech Connect (OSTI)

Interfacial charge-transfer rate constants have been measured for n-type Si electrodes in contact with a series of viologen-based redox couples in methanol through analyses of the behavior of these junctions with respect to their current density versus potential and differential capacitance versus potential properties. The data allow evaluation of the maximum rate constant (and therefore the electronic coupling) for majority carriers in the solid as well as of the dependence of the rate constant on the driving force for transfer of delocalized electrons from the n-Si semiconducting electrode into the localized molecular redox species in the solution phase. The data are in good agreement with existing models of this interfacial electron transfer process and provide insight into the fundamental kinetic events underlying the use of semiconducting photoelectrodes in applications such as solar energy conversion. 23 refs., 3 figs.

Fajardo, A.M.; Lewis, N.S. [California Institute of Technology, Pasadena, CA (United States)

1996-11-08T23:59:59.000Z

172

Evaluating land application effects  

SciTech Connect (OSTI)

The Philadelphia, PA Water Department embarked on a land application program of its treated wastewater sludge in 1977. Initially, liquid sludge averaging from 1-5% solids was applied to approximately 400 acres of corn, soybeans, and sod at rates sufficient to supply crop nitrogen needs. During the 1978 through 1984 growing seasons, crops and soils were monitored for heavy metals (bioavailability of cadmium, copper, nickel, chromium, lead and zinc) and in 1984 for PCB accumulation. This report summarizes results of the monitoring program until 1984.

Sarkis, K. (Philadelphia Water Department, PA (USA))

1987-01-01T23:59:59.000Z

173

Property:OpenEI/UtilityRate/DemandRateStructure/Tier1Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URI JumpEnergyInformation Rate

174

Property:OpenEI/UtilityRate/DemandRateStructure/Tier2Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation Rate Jump to:

175

Property:OpenEI/UtilityRate/DemandRateStructure/Tier4Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformationInformation Rate

176

7, 29612989, 2007 Predicting arene rate  

E-Print Network [OSTI]

software or computing power. Measured gas-phase rate coefficients for the reaction of aromatic hydrocarbons

Boyer, Edmond

177

Combined Retrieval, Microphysical Retrievals and Heating Rates  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Microphysical retrievals and heating rates from the AMIE/Gan deployment using the PNNL Combined Retrieval.

Feng, Zhe

178

Composite Fringe Benefit Rates Nancy R. Lewis  

E-Print Network [OSTI]

January 1, 2015 Retirement Eligible FY 2014-15 Rate FY 2015-16 Rate FY 2016-17 Rate B Healthcomp Faculty of Research #12;New Rates · Provided by the Budget Office for use when planning proposal budgets for contract and grants · Effective for use in proposals submitted to sponsors January 1, 2015 and thereafter · Title

Wood, Marcelo A.

179

Combined Retrieval, Microphysical Retrievals and Heating Rates  

SciTech Connect (OSTI)

Microphysical retrievals and heating rates from the AMIE/Gan deployment using the PNNL Combined Retrieval.

Feng, Zhe

2013-02-22T23:59:59.000Z

180

Where's My Bus Stop? Supporting Independence of Blind Transit Riders with StopInfo  

E-Print Network [OSTI]

in the Seattle area with information entered by the community, primarily as they waited at these stops and Society]: Social Is sues--Assistive technologies for persons with disabilities General Terms Design]. They often search for physical landmarks such as the bus shelter, benches, or transit sign as a cue

Manchak, John

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Brussels advocates a lone rider for ITER 09/22/2004 Edition  

E-Print Network [OSTI]

can advance alone to establish the thermonuclear reactor experimental ITER in Cadarache. France in the construction of the future experimental thermonuclear reactor ITER, if Brussels does not manage to convince

182

Enhancing Independence and Safety for Blind and Deaf-Blind Public Transit Riders  

E-Print Network [OSTI]

, Sanjana Prasain, Alan Borning, Emily Fortuna, Richard E. Ladner, Jacob O. Wobbrock Computer Science, prasains, borning, fortuna, ladner}@cs.washington.edu, wobbrock@uw.edu ABSTRACT Blind and deaf-blind people

Wobbrock, Jacob O.

183

A Bold and Fearless Rider: Ed Miller and the Paper Trail  

E-Print Network [OSTI]

This article recounts and summarizes the various published reports that discuss the death of 18-year old Ed Miller on the Santa Fe Trail in present-day McPherson County, Kansas, in July, 1864. The author attempts to confirm the actual date of death...

Stratton, John M.

2002-11-01T23:59:59.000Z

184

Genome organization of the tomato sun locus and characterization of the unusual retrotransposon Rider  

E-Print Network [OSTI]

Genome organization of the tomato sun locus and characterization of the unusual retrotransposon on a detailed analysis of the locus surrounding the tomato (Solanum lycopersicum) fruit-shape gene SUN density at the sun locus is similar to that described in other euchromatic portions of the tomato genome

van der Knaap, Esther

185

Voluntary Agreements to Improve Environmental Quality: Are late joiners the free riders?  

E-Print Network [OSTI]

of States Incentives for Renewable Energy (DSIRE). 11 Forof State Incentives for Renewable Energy (DSIRE). For multi-

Delmas, Magali A; Montes, Maria J.

2007-01-01T23:59:59.000Z

186

Voluntary Agreements to Improve Environmental Quality: Are late joiners the free riders?  

E-Print Network [OSTI]

Electric Cooperative Association, Large Public Power Council and Tennessee Valley Authority. future greenhouse gas regulations.

Delmas, Magali A; Montes, Maria J.

2007-01-01T23:59:59.000Z

187

L3:VUQ.VVDA.P2-2.03 William Rider SNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfraredJeffersonJonathanMultimaterial2 J.N. Shadid,a SANDIA REPORTb 11 Dan3

188

L3:VUQ.VVDA.P2-2.05 William Rider SNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfraredJeffersonJonathanMultimaterial2 J.N. Shadid,a SANDIA REPORTb 11 Dan345

189

APPLICATIONS INSTITUTIONS  

E-Print Network [OSTI]

as of 8/12/14 #12;CLASS OF 2013 EMPLOYMENT STATISTICS 9 MONTHS AFTER GRADUATION GRADUATES WITH KNOWN INFORMATION PLACEMENT RATE EMPLOYMENT TYPE FULL-TIME VS PART-TIME EMPLOYMENT Full-time: 88% Part-time: 12% LONG-TERM VS SHORT-TERM EMPLOYMENT Long-term: 90% Short-term: 10% EMPLOYMENT CATEGORIES Bar admission

Dasgupta, Dipankar

190

Home Energy Ratings and Building Performance  

E-Print Network [OSTI]

climate as they affect the rating score of a proposed or completed structure. The rating is used to determine the most cost effective mechanical systems, building envelope design including window and door types, effect of various roofing materials...

Gardner, J.C.

191

Smokeless Control of Flare Steam Flow Rate  

E-Print Network [OSTI]

measurement of mass flow rate of flare gas, in spite of the hostile environment. Its use for initiating control of flare steam flow rate and the addition of molecular weight compensation, using specific gravity (relative density) measurement to achieve...

Agar, J.; Balls, B. W.

1979-01-01T23:59:59.000Z

192

2012 Wholesale Power and Transmission Rate  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the meaning given such term in section 3.3.5. "COU Parties' PF Rate" means any BPA wholesale power rate for service to COUs' "general requirements" (as defined in section...

193

Kiwifruitsize influences softening rate during storage  

E-Print Network [OSTI]

fruit size and the rate of softening under air and CA conditions will help cold storage managerssafelyparts per billion induce rapid kiwifruit softening during cold storage, we investigated the rate

Crisosto, Carlos H.

194

ON THE RELATIONSHIP BETWEEN CONVERGENCE RATES OF ...  

E-Print Network [OSTI]

Q-rates in terms of the di erential properties of v and in terms of the ... schemes of this kind is to assure that they converge at a provably fast rate to a point.

195

Energy Efficiency Interest Rate Reduction Program  

Broader source: Energy.gov [DOE]

The Alaska Housing Finance Corporation (AHFC) offers interest rate reductions to home buyers purchasing new and existing homes with 5 Star and 5 Star Plus energy ratings. All homes constructed on...

196

Variable-Rate State Gasoline Taxes  

E-Print Network [OSTI]

J Bradshaw, "SLate F~es Gasoline Tax So ~t Wdl Rise," TheVarlable-Rate State Gasoline Taxers Jeffrey Ang-Olson MartinVariable-Rate State Gasoline Taxes Jeffrey Ang-Olson

Ang-Olson, Jeffrey; Wachs, Martin; Taylor, Brian D.

2000-01-01T23:59:59.000Z

197

Spontaneous Emission Rate Enhancement Using Optical Antennas  

E-Print Network [OSTI]

of Spontaneous Emission in a Semiconductor nanoLED, emission rate enhancement using the Fluorescent Emission by Lattice Resonances in

Kumar, Nikhil

2013-01-01T23:59:59.000Z

198

Optimization Online - Faster convergence rates of relaxed ...  

E-Print Network [OSTI]

Jul 19, 2014 ... Faster convergence rates of relaxed Peaceman-Rachford and ADMM under regularity assumptions. Damek Davis (damek ***at***...

Damek Davis

2014-07-19T23:59:59.000Z

199

Microsoft Word - 2007-fact-sheet-in-and-around-vehicle-safety...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Vehicles Fact Sheet. Washington (DC): SKW, 2007. 1 Incidents include non-traffic motorcycle riders, pedal cyclists, pedestrians, ATV riders, animal riders, railway train...

200

WAGES, FLEXIBLE EXCHANGE RATES, AND MACROECONOMIC POLICY*  

E-Print Network [OSTI]

WAGES, FLEXIBLE EXCHANGE RATES, AND MACROECONOMIC POLICY* JEFFREY SACHS In an open economy with a floaLing exchange rate, the efficacy of fiscal and monetary policy depends fundamentally on the wage rate depreciation, while fiscal expansion has no output effect. These results hold only when real wages

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

AUXILIARY RATE CALCULATION The Budget Office  

E-Print Network [OSTI]

AUXILIARY RATE CALCULATION The Budget Office #12;AGENDA Guiding Principles Rate Proposal Building Office supplies for budget manager reconciliationOffice supplies for budget manager reconciliation: Equipment Compensated Leave #12;CALCULATING A RATE Budgeted Expenses Budgeted Usage BaseBudgeted Usage Base

Weston, Ken

202

West Virginia University -Main Campus Student Retention and Graduation Rates  

E-Print Network [OSTI]

West Virginia University - Main Campus Student Retention and Graduation Rates First-Time, Full ---------------------------------------------------------------------Continuation Rates and Cumulative Graduation Rates

Mohaghegh, Shahab

203

TECHNICAL RISK RATING OF DOE ENVIRONMENTAL PROJECTS - 9153  

SciTech Connect (OSTI)

The U.S. Department of Energy's Office of Environmental Management (DOE-EM) was established to achieve the safe and compliant disposition of legacy wastes and facilities from defense nuclear applications. The scope of work is diverse, with projects ranging from single acquisitions to collections of projects and operations that span several decades and costs from hundreds of millions to billions US$. The need to be able to manage and understand the technical risks from the project to senior management level has been recognized as an enabler to successfully completing the mission. In 2008, DOE-EM developed the Technical Risk Rating as a new method to assist in managing technical risk based on specific criteria. The Technical Risk Rating, and the criteria used to determine the rating, provides a mechanism to foster open, meaningful communication between the Federal Project Directors and DOE-EM management concerning project technical risks. Four indicators (technical maturity, risk urgency, handling difficulty and resolution path) are used to focus attention on the issues and key aspects related to the risks. Pressing risk issues are brought to the forefront, keeping DOE-EM management informed and engaged such that they fully understand risk impact. Use of the Technical Risk Rating and criteria during reviews provides the Federal Project Directors the opportunity to openly discuss the most significant risks and assists in the management of technical risks across the portfolio of DOE-EM projects. Technical Risk Ratings can be applied to all projects in government and private industry. This paper will present the methodology and criteria for Technical Risk Ratings, and provide specific examples from DOE-EM projects.

Cercy, M; Ronald Fayfich, R; Steven P Schneider, S

2008-12-12T23:59:59.000Z

204

Dead-time compensation for a logarithmic display rate meter  

DOE Patents [OSTI]

An improved circuit is provided for application to a radiation survey meter that uses a detector that is subject to dead time. The circuit compensates for dead time over a wide range of count rates by producing a dead-time pulse for each detected event, a live-time pulse that spans the interval between dead-time pulses, and circuits that average the value of these pulses over time. The logarithm of each of these values is obtained and the logarithms are subtracted to provide a signal that is proportional to a count rate that is corrected for the effects of dead time. The circuit produces a meter indication and is also capable of producing an audible indication of detected events.

Larson, John A. (Aurora, IL); Krueger, Frederick P. (Aurora, IL)

1988-09-20T23:59:59.000Z

205

Dead-time compensation for a logarithmic display rate meter  

DOE Patents [OSTI]

An improved circuit is provided for application to a radiation survey meter that uses a detector that is subject to dead time. The circuit compensates for dead time over a wide range of count rates by producing a dead-time pulse for each detected event, a live-time pulse that spans the interval between dead-time pulses, and circuits that average the value of these pulses over time. The logarithm of each of these values is obtained and the logarithms are subtracted to provide a signal that is proportional to a count rate that is corrected for the effects of dead time. The circuit produces a meter indication and is also capable of producing an audible indication of detected events. 5 figs.

Larson, J.A.; Krueger, F.P.

1987-10-05T23:59:59.000Z

206

Towards hard x-ray imaging at GHz frame rate  

SciTech Connect (OSTI)

Gigahertz (GHz) imaging using hard x-rays ( Greater-Than-Or-Equivalent-To 10 keV) can be useful to high-temperature plasma experiments, as well as research and applications using coherent photons from synchrotron radiation and x-ray free electron lasers. GHz framing rate can be achieved by using multiple cameras through multiplexing. The advantages and trade-offs of single-photon detection mode, when no more than one x-ray photon is detected per pixel, are given. Two possible paths towards x-ray imaging at GHz frame rates using a single camera are: (a) avalanche photodiode arrays of high-Z materials and (b) microchannel plate photomultipliers in conjunction with materials with large indices of refraction.

Wang Zhehui; Morris, C. L.; Kapustinsky, J. S.; Kwiatkowski, K.; Luo, S.-N. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

2012-10-15T23:59:59.000Z

207

Influence of Multiplicative Stochastic Variation on Translational Elongation Rates  

E-Print Network [OSTI]

Recent experiments have shown that stochastic effects exerted at the level of translation contribute a substantial portion of the variation in abundance of proteins expressed at moderate to high levels. This study analyzes translational noise arising from fluctuations in residue-specific elongation rates. The resulting variation has multiplicative components that lead individual protein abundances in a population to exhibit approximately log-normal behavior. The high variability inherent in the process leads to parameter variation that has the features of a type of noise in biological systems that has been characterized as extrinsic. Elongation rate variation offers an accounting for a major component of extrinsic noise, and the analysis provided here highlights a probability distribution that is a natural extension of the Poisson and has broad applicability to many types of multiplicative noise processes.

Sandip Datta; Brian Seed

2014-09-15T23:59:59.000Z

208

FITCH RATES ENERGY NORTHWEST (WA) ELECTRIC REV REF BONDS 'AA...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FITCH RATES ENERGY NORTHWEST (WA) ELECTRIC REV REF BONDS 'AA'; OUTLOOK STABLE Fitch Ratings-Austin-08 April 2015: Fitch Ratings assigns 'AA' ratings to the following Energy...

209

Determination of glomerular filtration rate by external counting methods  

E-Print Network [OSTI]

comparing the DTPA to other accepted methods; the results were very favorable for the use of ggmTC-DTPA. Klopper et al. , sa1d mTc-DTPA ". . . rapidly prepared by a kit method, is a useful addition to the list of radiopharmaceuticals that can be used... points. First, the external counting method is suitable as a true means of determining the glomerular filtration rate (GFR). Second, the method is applicable to cats. To do this, five dogs were injected with ggmTc(Sn)-DTPA. Plasma samples were drawn...

Sartor, Tammy Lee

1981-01-01T23:59:59.000Z

210

Need for guidance and controls on royalty rate reductions for federal coal leases  

SciTech Connect (OSTI)

The Secretary of the Interior has used his authority to reduce royalty rates on eight Federal coal leases - amounting to $12 million in reduced Federal revenues. Requests for royalty rate reductions were precipitated by recent legislative enactments and a 2-year departmental experiment that raised royalty rates on coal leases to significantly higher levels. Because the Secretary is authorized to readjust the royalty rates on 438 leases by 1990 more requests for royalty reductions are likely in the future. The Interior Department has not clearly defined its policy and procedures on royalty rate reductions. The approval process is inconsistent, and accounting and auditing expertise needed to evaluate reduction requests have not been used adequately. GAO recommends that Interior develop a more clearly defined policy and accompanying regulations on royalty rate reductions, determine when audits of applicants' financial statements are needed, and better use existing financial expertise in its evaluations of reduction requests.

Not Available

1982-08-10T23:59:59.000Z

211

Application Acceleration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout theOFFICEAmesApplication Acceleration on Current and Future Cray

212

HEART RATE AS A MONITOR FOR METABOLIC RATE IN CAPTIVE JUVENILE STELLER SEA LIONS (EUMETOPIAS JUBATUS)  

E-Print Network [OSTI]

HEART RATE AS A MONITOR FOR METABOLIC RATE IN CAPTIVE JUVENILE STELLER SEA LIONS (EUMETOPIAS COLUMBIA 0Jan M. Mcl'hee, 2001 #12;ABSTRACT The potential use of heart rate to monitor energy expenditure a relationship exists between heart rate @I) and oxygen consumption ( ~ 0 ~ )in captive sea lions while swimming

213

An Examination of Harvest Rates and Brood-Take Rates as  

E-Print Network [OSTI]

An Examination of Harvest Rates and Brood-Take Rates as Management Strategies to Assist Recovery of Resource Management Project Number: 546 Title of Project: An Examination of Harvest Rates and Brood-Take Rates as Management Strategies to Assist Recovery of Cowichan River Chinook Salmon Examining Committee

214

Photovoltaic Degradation Rates -- An Analytical Review  

SciTech Connect (OSTI)

As photovoltaic penetration of the power grid increases, accurate predictions of return on investment require accurate prediction of decreased power output over time. Degradation rates must be known in order to predict power delivery. This article reviews degradation rates of flat-plate terrestrial modules and systems reported in published literature from field testing throughout the last 40 years. Nearly 2000 degradation rates, measured on individual modules or entire systems, have been assembled from the literature, showing a median value of 0.5%/year. The review consists of three parts: a brief historical outline, an analytical summary of degradation rates, and a detailed bibliography partitioned by technology.

Jordan, D. C.; Kurtz, S. R.

2012-06-01T23:59:59.000Z

215

Confronting the Graduation Rate Crisis in Texas  

E-Print Network [OSTI]

Guide to Graduation Policy and Rates, Editorial Projects inthe Graduation Crisis. Bethesda, MD: Editorial Projects inthe Graduation Crisis. Bethesda, MD: Editorial Projects in

Losen, Daniel; Orfield, Gary; Balfanz, Robert

2006-01-01T23:59:59.000Z

216

CM-1-H Wholesale Power Rate Schedule  

Broader source: Energy.gov [DOE]

Availability:This rate schedule shall be available to the South Mississippi Electric Power Association, Municipal Energy Agency of Mississippi, and Mississippi Delta Energy Agency (hereinafter...

217

Convergence Rates with Inexact Nonexpansive Operators  

E-Print Network [OSTI]

Apr 18, 2014 ... Abstract: In this paper, we present a convergence rate analysis for the inexact Krasnosel'ski{\\u{\\i}}-Mann iteration built from nonexpansive...

Jingwei Liang

2014-04-18T23:59:59.000Z

218

Method of controlling fusion reaction rates  

DOE Patents [OSTI]

This invention relates to a method of controlling the reaction rates in a nuclear fusion reactor; and more particularly, to the use of polarized nuclear fuel.

Kulsrud, R.M.; Furth, H.P.; Valeo, E.J.; Goldhaber, M.

1983-05-09T23:59:59.000Z

219

2006 Texas High Plains Cotton Variety Ratings  

E-Print Network [OSTI]

Average Incidence of Wilt Date of Wilt Rating Earth 0.0 0.0 Sept. 8 Brownfield 5.5 1.8 Aug. 28 Petersburg

Mukhtar, Saqib

220

Home energy rating systems: Program descriptions  

SciTech Connect (OSTI)

This report contains the descriptions of home energy rating and labelling programs (HERS) that were surveyed in January 1986 as part of a national evaluation of HERS.

Vine, E.; Barnes, B.K.; Ritschard, R.

1987-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

CONVERGENCE AND CONVERGENCE RATE OF STOCHASTIC ...  

E-Print Network [OSTI]

of applications in diverse areas such as signal processing, system ... (?, F,P), while {?n}n?0 is an Rd? -valued stochastic process defined on the same.

2009-07-17T23:59:59.000Z

222

Effect of Nitrogen Application on Pecan Above Ground Physiology and Root Traits  

E-Print Network [OSTI]

The United States pecan industry is experiencing a rapid acreage increase. Many growers believe high rates of nitrogen (N) accelerate tree development and increase yields; however, a high rate of N application may not be cost-effective and can...

Hannah, Hayley Meredith

2014-04-28T23:59:59.000Z

223

Characterization of wastewater subsurface drip emitters and design approaches concerning system application uniformity  

E-Print Network [OSTI]

applications showed low application uniformities, which was reflected in overloading of the field near the supply manifold while low emitter discharge rates occurred at the end of lateral. Designers are seeking appropriate operation pressures and drip zone...

Duan, Xiaojing

2009-06-02T23:59:59.000Z

224

E-Print Network 3.0 - applications annual technical Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CHP team offers technical assistance with CHP... of proposed systems based on TRNSYS CHP system application economic evaluations Utility service rate Source: Pint, Bruce A....

225

Modeling of Exascale Applications Summit | U.S. DOE Office of...  

Office of Science (SC) Website

to a number of hardware, system software, and application events, continuously optimizing energy and performance in the presence of very high error and failure rates. As a result,...

226

Cadmium Biosorption Rate in Protonated Sargassum Biomass  

E-Print Network [OSTI]

Cadmium Biosorption Rate in Protonated Sargassum Biomass J I N B A I Y A N G A N D B O H U M I L V Sargassum fluitans biomass was accompanied by the release of hydrogen protons from the biomass. The uptake the overall biosorption rate of cadmium ions in flat seaweed biomass particles. The overall biosorption

Volesky, Bohumil

227

Foolproof completions for high rate production wells  

E-Print Network [OSTI]

gravel pack (GP) and high rate water pack (HRWP) completions over high-permeability fracturing (HPF), known in the vernacular as a frac&pack (FP) for very high rate wells. While a properly designed GP completion may prevent sand production, it does...

Tosic, Slavko

2008-10-10T23:59:59.000Z

228

Foolproof completions for high rate production wells  

E-Print Network [OSTI]

gravel pack (GP) and high rate water pack (HRWP) completions over high-permeability fracturing (HPF), known in the vernacular as a frac&pack (FP) for very high rate wells. While a properly designed GP completion may prevent sand production, it does...

Tosic, Slavko

2009-05-15T23:59:59.000Z

229

False Discovery Rates John D. Storey  

E-Print Network [OSTI]

positives. The false discovery rate is designed to quantify this type of trade-off, making it particularly Hypothesis Testing In hypothesis testing, statistical significance is typically based on calculations involving p-values and Type I error rates. A p-value calculated from a single statistical hypothesis test

Storey, John D.

230

Method of controlling fusion reaction rates  

DOE Patents [OSTI]

A method of controlling the reaction rates of the fuel atoms in a fusion reactor comprises the step of polarizing the nuclei of the fuel atoms in a particular direction relative to the plasma confining magnetic field. Fusion reaction rates can be increased or decreased, and the direction of emission of the reaction products can be controlled, depending on the choice of polarization direction.

Kulsrud, Russell M. (Princeton, NJ); Furth, Harold P. (Princeton, NJ); Valeo, Ernest J. (Princeton Junction, NJ); Goldhaber, Maurice (Bayport, NY)

1988-01-01T23:59:59.000Z

231

Theoretical cosmic Type Ia supernova rates  

E-Print Network [OSTI]

The aim of this work is the computation of the cosmic Type Ia supernova rates at very high redshifts (z>2). We adopt various progenitor models in order to predict the number of explosions in different scenarios for galaxy formation and to check whether it is possible to select the best delay time distribution model, on the basis of the available observations of Type Ia supernovae. We also computed the Type Ia supernova rate in typical elliptical galaxies of different initial luminous masses and the total amount of iron produced by Type Ia supernovae in each case. It emerges that: it is not easy to select the best delay time distribution scenario from the observational data and this is because the cosmic star formation rate dominates over the distribution function of the delay times; the monolithic collapse scenario predicts an increasing trend of the SN Ia rate at high redshifts whereas the predicted rate in the hierarchical scheme drops dramatically at high redshift; for the elliptical galaxies we note that the predicted maximum of the Type Ia supernova rate depends on the initial galactic mass. The maximum occurs earlier (at about 0.3 Gyr) in the most massive ellipticals, as a consequence of downsizing in star formation. We find that different delay time distributions predict different relations between the Type Ia supernova rate per unit mass at the present time and the color of the parent galaxies and that bluer ellipticals present higher supernova Type Ia rates at the present time.

R. Valiante; F. Matteucci; S. Recchi; F. Calura

2009-03-16T23:59:59.000Z

232

Resonances and the thermonuclear reaction rate  

E-Print Network [OSTI]

We present an approximate analytic expression for thermonuclear reaction rate of charged particles when the cross section contains a single narrow or wide resonance described by a Breit-Wigner shape. The resulting expression is uniformly valid as the effective energy and resonance energy coalesce. We use our expressions to calculate the reaction rate for $^{12}$C(p,$\\gamma$)$^{13}$N.

M. S. Hussein; M. Ueda; A. J. Sargeant; M. P. Pato

2003-07-21T23:59:59.000Z

233

Atomic multipole relaxation rates near surfaces  

E-Print Network [OSTI]

The spontaneous relaxation rates for an atom in free space and close to an absorbing surface are calculated to various orders of the electromagnetic multipole expansion. The spontaneous decay rates for dipole, quadrupole and octupole transitions are calculated in terms of their respective primitive electric multipole moments and the magnetic relaxation rate is calculated for the dipole and quadrupole transitions in terms of their respective primitive magnetic multipole moments. The theory of electromagnetic field quantization in magnetoelectric materials is used to derive general expressions for the decay rates in terms of the dyadic Green function. We focus on the decay rates in free space and near an infinite half space. For the decay of atoms near to an absorbing dielectric surface we find a hierarchy of scaling laws depending on the atom-surface distance z.

J. A. Crosse; Stefan Scheel

2010-08-13T23:59:59.000Z

234

Nuclear reaction rates and the primordial nucleosynthesis  

E-Print Network [OSTI]

The theoretical predictions of the primordial abundances of elements in the big-bang nucleosynthesis (BBN) are dominated by uncertainties in the input nuclear reaction rates. We investigate the effect of modifying these reaction rates on light element abundance yields in BBN by replacing the thirty-five reaction rates out of the existing eighty-eight. We have studied these yields as functions of evolution time or temperature. We find that using these new reaction rates results in only a little increase in helium mass fraction over that obtained previously in BBN calculations. This allows insights into the role of the nuclear reaction rates in the setting of the neutron-to-proton ratio during the BBN epoch. We observe that even with considerable nuclear physics uncertainties, most of these nuclear reactions have minimal effect on the standard BBN abundance yields of $^6$Li and $^7$Li.

Abhishek Mishra; D. N. Basu

2011-11-15T23:59:59.000Z

235

THE NOVA RATE IN NGC 2403  

SciTech Connect (OSTI)

A multi-epoch H{alpha} survey of the late-type spiral galaxy NGC 2403 has been completed in order to determine its nova rate. A total of nine nova candidates were discovered in 48 nights of observation with two different telescopes over the period from 2001 February to 2012 April. After making corrections for temporal coverage and spatial completeness, a nova rate of 2.0{sup +0.5} {sub -0.3} yr{sup -1} was determined. This rate corresponds to a luminosity-specific nova rate of 2.5 {+-} 0.7 novae per year per 10{sup 10} L {sub Sun ,K}. This value is consistent with that of the similar Hubble-type galaxy, M33, and is typical of those of other galaxies with measured nova rates, which range from 1 to 3 novae per year per 10{sup 10} L {sub Sun ,K}.

Franck, J. R.; Shafter, A. W. [Department of Astronomy, San Diego State University, San Diego, CA 92182 (United States); Hornoch, K. [Astronomical Institute, Academy of Sciences, CZ-251 65 Ondrejov (Czech Republic); Misselt, K. A. [Steward Observatory, University of Arizona, Tucson, AZ 85721 (United States)

2012-11-20T23:59:59.000Z

236

Merger Rates of Dark-Matter Haloes  

E-Print Network [OSTI]

We derive analytic merger rates for dark-matter haloes within the framework of the Extended Press-Schechter (EPS) formalism. These rates become self-consistent within EPS once we realize that the typical merger in the limit of a small time-step involves more than two progenitors, contrary to the assumption of binary mergers adopted in earlier studies. We present a general method for computing merger rates that span the range of solutions permitted by the EPS conditional mass function, and focus on a specific solution that attempts to match the merger rates in N-body simulations. The corrected EPS merger rates are more accurate than the earlier estimates of Lacey & Cole, by ~20% for major mergers and by up to a factor of ~3 for minor mergers of mass ratio 1:10^4. Based on the revised merger rates, we provide a new algorithm for constructing Monte-Carlo EPS merger trees, that could be useful in Semi-Analytic Modeling. We provide analytic expressions and plot numerical results for several quantities that are very useful in studies of galaxy formation. This includes (a) the rate of mergers of a given mass ratio per given final halo, (b) the fraction of mass added by mergers to a halo, and (c) the rate of mergers per given main progenitor. The creation and destruction rates of haloes serve for a self-consistency check. Our method for computing merger rates can be applied to conditional mass functions beyond EPS, such as those obtained by the ellipsoidal collapse model or extracted from $N$-body simulations.

Eyal Neistein; Avishai Dekel

2008-05-22T23:59:59.000Z

237

Universal Parametrization of Thermal Photon Rates in Hadronic Matter  

E-Print Network [OSTI]

Electromagnetic (EM) radiation off strongly interacting matter created in high-energy heavy-ion collisions (HICs) encodes information on the high-temperature phases of nuclear matter. Microscopic calculations of thermal EM emission rates are usually rather involved and not readily accessible to broad applications in models of the fireball evolution which are required to compare to experimental data. An accurate and universal parametrization of the microscopic calculations is thus key to honing the theory behind the EM spectra. Here we provide such a parametrization for photon emission rates from hadronic matter, including the contributions from in-medium rho mesons (which incorporate effects from anti-/baryons), as well as Bremsstrahlung from pi-pi scattering. Individual parametrizations for each contribution are numerically determined through nested fitting functions for photon energies from 0.2 to 5 GeV in chemically equilibrated matter of temperatures 100-180 MeV and baryon chemical potentials 0-400 MeV. Special care is taken to extent the parameterizations to chemical off-equilibrium as encountered in HICs after chemical freezeout. This provides a functional description of thermal photon rates within a 20% variation of the microscopically calculated values.

Matthew Heffernan; Paul Hohler; Ralf Rapp

2014-11-25T23:59:59.000Z

238

Absorption Cycle Fundamentals and Applications Guidelines for Distillation Energy Savings  

E-Print Network [OSTI]

The absorption cycle offers one of the most economic and widely applicable technologies for waste heat upgrading. It can use off-the-shelf hardware that is available now, at any required capacity rating. Fractional distillations, as a class...

Erickson, D. C.; Davidson, W. F.

1984-01-01T23:59:59.000Z

239

TRANSPARENT HEAT MIRRORS FOR PASSIVE SOLAR HEATING APPLICATIONS  

E-Print Network [OSTI]

heating purposes. BACKGROUND The reduction of heat transfer rates by the use of thermal infraredheating applications should become available on the marketplace. Due to their high reflectivity to thermal infrared

Selkowitz, S.

2011-01-01T23:59:59.000Z

240

astrophysical applications spectroscopie: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

OVII OVIII NeXII SiXIV FeXVII NeXI Topic1:HotStarX-rays Cohen, David 2 Workshop on Thermonuclear Reaction Rates for Astrophysics Applications Computer Technologies and Information...

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Proposal for grid computing for nuclear applications  

SciTech Connect (OSTI)

The use of computer clusters for computational sciences including computational physics is vital as it provides computing power to crunch big numbers at a faster rate. In compute intensive applications that requires high resolution such as Monte Carlo simulation, the use of computer clusters in a grid form that supplies computational power to any nodes within the grid that needs computing power, has now become a necessity. In this paper, we described how the clusters running on a specific application could use resources within the grid, to run the applications to speed up the computing process.

Idris, Faridah Mohamad; Ismail, Saaidi; Haris, Mohd Fauzi B.; Sulaiman, Mohamad Safuan B.; Aslan, Mohd Dzul Aiman Bin.; Samsudin, Nursuliza Bt.; Ibrahim, Maizura Bt.; Ahmad, Megat Harun Al Rashid B. Megat; Yazid, Hafizal B.; Jamro, Rafhayudi B.; Azman, Azraf B.; Rahman, Anwar B. Abdul; Ibrahim, Mohd Rizal B. Mamat; Muhamad, Shalina Bt. Sheik; Hassan, Hasni [Malaysian Nuclear Agency, Bangi, 43000 Kajang, Selangor (Malaysia); Abdullah, Wan Ahmad Tajuddin Wan; Ibrahim, Zainol Abidin; Zolkapli, Zukhaimira; Anuar, Afiq Aizuddin; Norjoharuddeen, Nurfikri [Physics Department, University of Malaya, 56003 Kuala Lumpur (Malaysia); and others

2014-02-12T23:59:59.000Z

242

Considerations for How to Rate CPV  

SciTech Connect (OSTI)

The concentrator photovoltaic (CPV) industry is introducing multiple products into the marketplace, but, as yet, the; community has not embraced a unified method for assessing a nameplate rating. The choices of whether to use 850,; 900, or 1000 W/m2 for the direct-normal irradiance and whether to link the rating to ambient or cell temperature will; affect how CPV modules are rated and compared with other technologies. This paper explores the qualitative and; quantitative ramifications of these choices using data from two multi-junction CPV modules and two flat-plate; modules.

Kurtz, S.; Miller, M.; Marion, B.; Emery, K.; McConnell, R.; Surendran, S.; Kimber, A.

2011-02-01T23:59:59.000Z

243

Measuring Degradation Rates Without Irradiance Data  

SciTech Connect (OSTI)

A method to report PV system degradation rates without using irradiance data is demonstrated. First, a set of relative degradation rates are determined by comparing daily AC final yields from a group of PV systems relative to the average final yield of all the PV systems. Then, the difference between relative and absolute degradation rates is found from a statistical analysis. This approach is verified by comparing to methods that utilize irradiance data. This approach is significant because PV systems are often deployed without irradiance sensors, so the analysis method described here may enable measurements of degradation using data that were previously thought to be unsuitable for degradation studies.

Pulver, S.; Cormode, D.; Cronin, A.; Jordan, D.; Kurtz, S.; Smith, R.

2011-02-01T23:59:59.000Z

244

2007 Wholesale Power Rate Case Initial Proposal : Section 7(b)(2) Rate Test Study.  

SciTech Connect (OSTI)

Section 7(b)(2) of the Pacific Northwest Electric Power Planning and Conservation Act (Northwest Power Act), 16 U.S.C. {section} 839e(b)(2), directs the Bonneville Power Administration (BPA) to conduct, after July 1, 1985, a comparison of the projected rates to be charged its preference and Federal agency customers for their firm power requirements, over the rate test period plus the ensuing four years, with the costs of power (hereafter called rates) to those customers for the same time period if certain assumptions are made. The effect of this rate test is to protect BPA's preference and Federal agency customers wholesale firm power rates from certain specified costs resulting from provisions of the Northwest Power Act. The rate test can result in a reallocation of costs from the general requirements loads of preference and Federal agency customers to other BPA loads. The rate test involves the projection and comparison of two sets of wholesale power rates for the general requirements loads of BPA's public body, cooperative, and Federal agency customers (7(b)(2) Customers). The two sets of rates are: (1) a set for the test period and the ensuing four years assuming that section 7(b)(2) is not in effect (known as Program Case rates); and (2) a set for the same period taking into account the five assumptions listed in section 7(b)(2), (known as 7(b)(2) Case rates). Certain specified costs allocated pursuant to section 7(g) of the Northwest Power Act are subtracted from the Program Case rates. Next, each nominal rate is discounted to the beginning of the test period of the relevant rate case. The discounted Program Case rates are averaged, as are the 7(b)(2) Case rates. Both averages are rounded to the nearest tenth of a mill for comparison. If the average Program Case rate is greater than the average 7(b)(2) Case rate, the rate test triggers. The difference between the average Program Case rate and the average 7(b)(2) Case rate determines the amount to be reallocated from the 7(b)(2) Customers to other BPA loads in the rate proposal test period.

United States. Bonneville Power Administration.

2005-11-01T23:59:59.000Z

245

2007 Wholesale Power Rate Case Final Proposal : Wholesale Power Rate Development Study.  

SciTech Connect (OSTI)

The Wholesale Power Rate Development Study (WPRDS) serves two primary purposes. It synthesizes information supplied by the other final studies that comprise the BPA rate proposal and shows the actual calculations for BPA's power rates. In addition, the WPRDS is the primary source for certain information used in establishing the power rates. Information developed in the WPRDS includes rate design (including seasonal and diurnal shapes for energy rates, demand, and load variance rates), the risk mitigation tools (Cost Recovery Adjustment Clause (CRAC), along with the [N]ational Marine Fisheries Service [F]ederal Columbia River Power System [B]iological Opinion (NFB) Adjustment, the Emergency NFB Surcharge, and Dividend Distribution Clause (DDC)), development of the Slice rate, and all discounts and other adjustments that are included in the rate schedules and the General Rate Schedule Provisions. The WPRDS also includes the description of the methodology for the Cost of Service Analysis (COSA), and the various rate design steps necessary to establish BPA's power rates. The WPRDS also shows the calculations for inter-business line revenues and expenses, the revenue forecast and, finally, includes a description of all of the rate schedules. The actual rate schedules are shown in ''Administrator's Final Record of Decision (ROD), Appendix A: 2007 Wholesale Power Rate Schedules and General Rate Schedule Provisions, WP-07-A-02''. The WPRDS also includes the Partial Resolution of Issues, shown in Attachment 1 of the ROD. The Partial Resolution of Issues affected many of the features described in this study. These are noted where appropriate.

United States. Bonneville Power Administration.

2006-07-01T23:59:59.000Z

246

Cooling rate, heating rate, and aging effects in glassy water Nicolas Giovambattista,1  

E-Print Network [OSTI]

be glassified by cooling using hyper- quenching techniques (i.e., with rates of the order of 105 K/s [8Cooling rate, heating rate, and aging effects in glassy water Nicolas Giovambattista,1 H. Eugene of water molecules during the process of generating a glass by cooling, and during the process

Sciortino, Francesco

247

Extended range radiation dose-rate monitor  

DOE Patents [OSTI]

An extended range dose-rate monitor is provided which utilizes the pulse pileup phenomenon that occurs in conventional counting systems to alter the dynamic response of the system to extend the dose-rate counting range. The current pulses from a solid-state detector generated by radiation events are amplified and shaped prior to applying the pulses to the input of a comparator. The comparator generates one logic pulse for each input pulse which exceeds the comparator reference threshold. These pulses are integrated and applied to a meter calibrated to indicate the measured dose-rate in response to the integrator output. A portion of the output signal from the integrator is fed back to vary the comparator reference threshold in proportion to the output count rate to extend the sensitive dynamic detection range by delaying the asymptotic approach of the integrator output toward full scale as measured by the meter.

Valentine, Kenneth H. (Knoxville, TN)

1988-01-01T23:59:59.000Z

248

Historical river flow rates for dose calculations  

SciTech Connect (OSTI)

Annual average river flow rates are required input to the LADTAP Computer Code for calculating offsite doses from liquid releases of radioactive materials to the Savannah River. The source of information on annual river flow rates used in dose calculations varies, depending on whether calculations are for retrospective releases or prospective releases. Examples of these types of releases are: Retrospective - releases from routine operations (annual environmental reports) and short term release incidents that have occurred. Prospective - releases that might be expected in the future from routine or abnormal operation of existing or new facilities (EIS`s, EID`S, SAR`S, etc.). This memorandum provides historical flow rates at the downstream gauging station at Highway 301 for use in retrospective dose calculations and derives flow rate data for the Beaufort-Jasper and Port Wentworth water treatment plants.

Carlton, W.H.

1991-06-10T23:59:59.000Z

249

Extratropical Lapse Rates in Very Hot Climates  

E-Print Network [OSTI]

circulation in progressively warmer climate states. As a tool to assess the stability of the atmosphere, we calculate a thermodynamic variable called saturation potential vorticity (P*), which has the property of being identically zero wherever lapse rates...

Zamora, Ryan Alexander

2013-07-02T23:59:59.000Z

250

PSNC Energy (Gas)- Green Building Rate Discount  

Broader source: Energy.gov [DOE]

This discounted rate is available to commercial customers whose building meets the U.S. Green Building Councils Leadership in Energy and Environmental Design (LEED) certification or equivalent. To...

251

Dynamic Line Rating: Research and Policy Evaluation  

SciTech Connect (OSTI)

Dynamic Line Rating (DLR) is a smart grid technology that allows the rating of electrical conductors to be increased based on local weather conditions. Overhead lines are conventionally given a conservative rating based on worst case scenarios. We demonstrate that observing the conditions in real time leads to additional capacity and safer operation. This paper provides a report of a pioneering scheme in the United States of America in which DLR has been applied. Thereby, we demonstrate that observing the local weather conditions in real time leads to additional capacity and safer operation. Secondly, we discuss limitations involved. In doing so, we arrive at novel insights which will inform and improve future DLR projects. Third, we provide a policy background and discussion to clarify the technologys potential and identifies barriers to the imminent adoption of dynamic line rating systems. We provide suggestions for regulatory bodies about possible improvements in policy to encourage adoption of this beneficial technology.

Jake P. Gentle; Kurt S. Myers; Michael R. West

2014-07-01T23:59:59.000Z

252

Rating of Solar Energy Devices (Texas)  

Broader source: Energy.gov [DOE]

The Public Utility Commission has regulatory authority over solar energy devices installed and used in the state of Texas. The Commission can choose to adopt standards pertaining to the rating of...

253

Rainfall-induced Landslide Hazard Rating System  

E-Print Network [OSTI]

This research develops a Landslide Hazard Rating System for the rainfall-induced landslides in the Chenyulan River basin area in central Taiwan. This system is designed to provide a simplified and quick evaluation of the ...

Chen, Yi-Ting, Civ. E., Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

254

Uncertainty Analysis for Photovoltaic Degradation Rates (Poster)  

SciTech Connect (OSTI)

Dependable and predictable energy production is the key to the long-term success of the PV industry. PV systems show over the lifetime of their exposure a gradual decline that depends on many different factors such as module technology, module type, mounting configuration, climate etc. When degradation rates are determined from continuous data the statistical uncertainty is easily calculated from the regression coefficients. However, total uncertainty that includes measurement uncertainty and instrumentation drift is far more difficult to determine. A Monte Carlo simulation approach was chosen to investigate a comprehensive uncertainty analysis. The most important effect for degradation rates is to avoid instrumentation that changes over time in the field. For instance, a drifting irradiance sensor, which can be achieved through regular calibration, can lead to a substantially erroneous degradation rates. However, the accuracy of the irradiance sensor has negligible impact on degradation rate uncertainty emphasizing that precision (relative accuracy) is more important than absolute accuracy.

Jordan, D.; Kurtz, S.; Hansen, C.

2014-04-01T23:59:59.000Z

255

Rating of Mixed Split Residential Air Conditioners  

E-Print Network [OSTI]

A methodology is presented for rating the performance of mixed, split residential air conditioners. The method accounts for the impact on system performance of the indoor evaporator, expansion device and fan; three major components that are likely...

Domanski, P. A.

1988-01-01T23:59:59.000Z

256

Transition Path Sampling of Water Exchange Rates and Mechanisms...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Path Sampling of Water Exchange Rates and Mechanisms around Aqueous Ions . Transition Path Sampling of Water Exchange Rates and Mechanisms around Aqueous Ions . Abstract: The rates...

257

Contractor Rating and Feedback Systems | Department of Energy  

Energy Savers [EERE]

Contractor Rating and Feedback Systems Contractor Rating and Feedback Systems Better Buildings Residential Workforce Business Partners Peer Exchange Call Series: Contractor Rating...

258

HIgh Rate X-ray Fluorescence Detector  

SciTech Connect (OSTI)

The purpose of this project was to develop a compact, modular multi-channel x-ray detector with integrated electronics. This detector, based upon emerging silicon drift detector (SDD) technology, will be capable of high data rate operation superior to the current state of the art offered by high purity germanium (HPGe) detectors, without the need for liquid nitrogen. In addition, by integrating the processing electronics inside the detector housing, the detector performance will be much less affected by the typically noisy electrical environment of a synchrotron hutch, and will also be much more compact than current systems, which can include a detector involving a large LN2 dewar and multiple racks of electronics. The combined detector/processor system is designed to match or exceed the performance and features of currently available detector systems, at a lower cost and with more ease of use due to the small size of the detector. In addition, the detector system is designed to be modular, so a small system might just have one detector module, while a larger system can have many ?? you can start with one detector module, and add more as needs grow and budget allows. The modular nature also serves to simplify repair. In large part, we were successful in achieving our goals. We did develop a very high performance, large area multi-channel SDD detector, packaged with all associated electronics, which is easy to use and requires minimal external support (a simple power supply module and a closed-loop water cooling system). However, we did fall short of some of our stated goals. We had intended to base the detector on modular, large-area detectors from Ketek GmbH in Munich, Germany; however, these were not available in a suitable time frame for this project, so we worked instead with pnDetector GmbH (also located in Munich). They were able to provide a front-end detector module with six 100 m^2 SDD detectors (two monolithic arrays of three elements each) along with associated preamplifiers; these detectors surpassed the performance we expected to get from the Ketek detectors, however they are housed in a sealed module, which does not offer the ease of repair and expandability we??d hoped to achieve with the Ketek SDD??s. Our packaging efforts were quite successful, as we came up with a very compact way to mount the detector and to house the associated electronics, as well as a very effective way to reliably take out the heat (from the electronics as well as the detector??s Peltier coolers) without risk of condensation and without external airflow or vibration, which could create problems for the target applications. While we were able to design compact processing electronics that fit into the detector assembly, they are still at the prototype stage, and would require a significant redesign to achieve product status. We have not yet tested this detector at a synchrotron facility; we do still plan on working with some close contacts at the nearby Stanford Synchrotron Radiation Laboratory (SSRL) to get some testing with the beam (using existing commercial electronics for readout, as the integrated processor is not ready for use).

Grudberg, Peter Matthew [XIA LLC

2013-04-30T23:59:59.000Z

259

Calibration and Rating of Photovoltaics: Preprint  

SciTech Connect (OSTI)

Rating the performance of photovoltaic (PV) modules is critical to determining the cost per watt, and efficiency is useful to assess the relative progress among PV concepts. Procedures for determining the efficiency for PV technologies from 1-sun to low concentration to high concentration are discussed. We also discuss the state of the art in primary and secondary calibration of PV reference cells used by calibration laboratories around the world. Finally, we consider challenges to rating PV technologies and areas for improvement.

Emery, K.

2012-06-01T23:59:59.000Z

260

Solar Models and NACRE thermonuclear reaction rates  

E-Print Network [OSTI]

Using the most recent updated physics, calibrated solar models have been computed with the new thermonuclear reaction rates of NACRE, the recently available European compilation. Comparisons with models computed with the reaction rates of Caughlan & Fowler (\\cite{cf88}) and of Adelberger et al. (\\cite{a98}) are made for global structure, expected neutrinos fluxes, chemical composition and sound speed profiles, helioseismological properties of p-modes and g-modes.

P. Morel; B. Pichon; J. Provost; G. Berthomieu

1999-07-27T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Rate allocation in a remote control structure  

E-Print Network [OSTI]

measuzes. The quantized control problem, in general, has vector sources with weighted distortion measures. The rate allocation scheme of Goodman, must therefore be modified to allow for vector sources. Chapter 3 will specifically address the problem... of rate allocation given vector sources and weighted distortion measures' Equations will be derived for the case when the measurements and controls are assumed independent and when they are dependent. k + k P k (a) k/k-1 (b) Fig. 2. DPCM (a...

Meadow, Charles Joe

1984-01-01T23:59:59.000Z

262

Radiation Leukemogenesis at Low Dose Rates  

SciTech Connect (OSTI)

The major goals of this program were to study the efficacy of low dose rate radiation exposures for the induction of acute myeloid leukemia (AML) and to characterize the leukemias that are caused by radiation exposures at low dose rate. An irradiator facility was designed and constructed that allows large numbers of mice to be irradiated at low dose rates for protracted periods (up to their life span). To the best of our knowledge this facility is unique in the US and it was subsequently used to study radioprotectors being developed for radiological defense (PLoS One. 7(3), e33044, 2012) and is currently being used to study the role of genetic background in susceptibility to radiation-induced lung cancer. One result of the irradiation was expected; low dose rate exposures are ineffective in inducing AML. However, another result was completely unexpected; the irradiated mice had a very high incidence of hepatocellular carcinoma (HCC), approximately 50%. It was unexpected because acute exposures are ineffective in increasing HCC incidence above background. This is a potential important finding for setting exposure limits because it supports the concept of an 'inverse dose rate effect' for some tumor types. That is, for the development of some tumor types low dose rate exposures carry greater risks than acute exposures.

Weil, Michael; Ullrich, Robert

2013-09-25T23:59:59.000Z

263

Ratios of heavy hadron semileptonic decay rates  

E-Print Network [OSTI]

Ratios of charmed meson and baryon semileptonic decay rates appear to be satisfactorily described by considering only the lowest-lying (S-wave) hadronic final states and assuming the kinematic factor describing phase space suppression is the same as that for free quarks. For example, the rate for $D_s$ semileptonic decay is known to be $(17.0 \\pm 5.3)%$ lower than those for $D^0$ or $D^+$, and the model accounts for this difference. When applied to hadrons containing $b$ quarks, this method implies that the $B_s$ semileptonic decay rate is about 1% higher than that of the nonstrange $B$ mesons. This small difference thus suggests surprisingly good local quark-hadron duality for $B$ semileptonic decays, complementing the expectation based on inclusive quark-hadron duality that these differences in rates should not exceed a few tenths of a percent. For $\\Lambda_b$ semileptonic decay, however, the inclusive rate is predicted to be about 13% greater than that of the nonstrange $B$ mesons. This value, representing a considerable departure from a calculation using a heavy quark expansion, is close to the corresponding experimental ratio $\\Gamma(\\Lambda_b)/ \\bar \\Gamma(B) = 1.13 \\pm 0.03$ of total decay rates.

Michael Gronau; Jonathan L. Rosner

2010-12-27T23:59:59.000Z

264

Short GRBs: Rates and luminosity function implications  

E-Print Network [OSTI]

We compare the luminosity function and rate inferred from the BATSE short hard bursts (SHBs) peak flux distribution with the redshift and luminosity distributions of SHBs observed by Swift/HETE II. The Swift/HETE II SHB sample is incompatible with SHB population that follows the star formation rate. However, it is compatible with a distribution of delay times after the SFR. This would be the case if SHBs are associated with the mergers of double neutron star (DNS) systems. DNS may be ``primordial'' or can form dynamically by binary exchange interaction in globular clusters during core collapse. The implied SHB rates that we find range from \\sim 8 to \\sim 30h_(70)^3 Gpc^(-3)yr^(-1). This rate is a much higher than what was previously estimated and, when beaming is taken into account, it is comparable to the rate of neutron star mergers estimated from statistics of binary pulsars. If GRBs are produced in mergers the implied rate practically guarantees detection by LIGO II and possibly even by LIGO I.

Dafne Guetta

2006-10-13T23:59:59.000Z

265

Application Deadline: Where you'll find  

E-Print Network [OSTI]

's power market · Developing practical Bayesian insurance loss reserving models to protect people against, and applications to biology, medicine and oil & gas industry You could be working on these research problems · Applying differential and difference equations to model growth rates of animal and plant populations

de Leon, Alex R.

266

Shock Compression and Strain Rate Effect in Composites and Polymers  

SciTech Connect (OSTI)

Polymers are increasingly being utilized as monolithic materials and composite matrices for structural applications historically reserved for metals. High strain and high strain-rate applications in aerospace, defense, and automotive industries have lead to interest in utilizing the ability of many polymers to withstand extensions to failure of several hundred percent, often without localization or necking and their strong rate dependence. A broad range of characterization techniques will be presented for semi-crystalline polymers and composites including elastic-plastic fracture, split Hopkinson pressure bar (SHPB), plate impact including soft-recovery and lateral gage measurements and Taylor Impact. Gas-launched, plate impact experiments have been performed on pedigreed PTFE 7C, mounted in momentum-trapped, shock assemblies, with impact pressures above and below the phase II to phase III crystalline transition to probe subtle changes in the crystallinity, microstructure, and mechanical response of PTFE. Observed strong anisotropy on the hugoniot and spall behavior of fiber-reinforced composites will be discussed. Polymers are known to exhibit a strong dependence of the yield stress on temperature and strain-rate that are often observed to be linear for temperature and logarithmic for strain-rate. Temperature and strain-rate dependence will be reviewed in terms of classic time-temperature superposition and an empirical mapping function for superposition between temperature and strain-rate. The recent extension of the new Dynamic-Tensile-Extrusion (Dyn-Ten-Ext) technique to probe the dynamic tensile responses of polymers will be discussed, where more irregular deformation and stochastic-based damage and failure mechanisms than the stable plastic elongation and shear instabilities observed that in metals. The opportunity to use of Dyn-Ten-Ext to probe incipient damage at very high strain-rate by linking in situ and post mortem experimental observations with high-fidelity simulation will be introduced. The potential to study polymer deformation under even more extreme conditions by employing explosive drive to induce Rayleigh-Taylor (RT) growth linking with in situ diagnosis by proton radiography will be proposed. Finally, a case study of collaboration between experimentalists and modelers to study the shock induced phase transition of PTFE presented. Building on a history of shock and Diamond Anvil Cell data it has long been know that PTFE exhibits a pressure induced phase transition at 0.7 GPa. The transition has historically been assumed and reported to be dependent on the hydrostatic pressure. However, studies employing neutron diffraction have suggested the phase transition is driven by only the principle stress applied to the compliant direction of crystalline domain. A multiphase model based on the Maxwell-type viscoelastic formulation was developed to include the stress deviator to drive potential martensitic transition and time to reflects the kinetic nature of the transitions demonstrating the need to account for both a martensitic nature and kinetics of the transition to capture subtle experimental observables.

Brown, Eric [Los Alamos National Laboratory

2012-06-20T23:59:59.000Z

267

IB Peer Advisor Application Dear Applicant,  

E-Print Network [OSTI]

IB Peer Advisor Application 2014-2015 Dear Applicant, Thank you for your interest in being an IB Peer Advisor for the 2014-15 academic year. These positions provide valuable opportunities for students all of the components of the peer advisor position before applying, · a one page application form

California at Berkeley, University of

268

GETTING THE MOST FROM N AND P APPLICATIONS ON  

E-Print Network [OSTI]

Corn Yield Response to Nitrogen Rock County, WI N rate Yield, tons/acre lb/acre Site 1 Site 2 0 5.64 b applications. #12;Nitrogen uptake and source by sweet corn, Hancock , WI Plant part Total N uptake Fert. N Beans Excess N showed yield reduction N rate did not affect sieve size (measure of maturity) #12

Balser, Teri C.

269

Variable Latency Turbo Codes for Wireless Multimedia Applications  

E-Print Network [OSTI]

Variable Latency Turbo Codes for Wireless Multimedia Applications Matthew C. Valenti and Brian D acceptable latency and Bit Error Rate BER or Frame Error Rate FER. In turbo coded systems a tradeo between an adaptive turbo coding strategy for wire- less multimedia communications that incor- porates a set

Valenti, Matthew C.

270

FITCH RATES PORT OF MORROW (OR) TRANSMISSION FACILITIES REV BONDS...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FITCH RATES PORT OF MORROW (OR) TRANSMISSION FACILITIES REV BONDS 'AA'; OUTLOOK STABLE Fitch Ratings-Austin-24 November 2014: Fitch Ratings assigns 'AA' ratings to the Port of...

271

Heart Rate Variability Analysis Using Threshold of Wavelet Package Coefficients  

E-Print Network [OSTI]

In this paper, a new efficient feature extraction method based on the adaptive threshold of wavelet package coefficients is presented. This paper especially deals with the assessment of autonomic nervous system using the background variation of the signal Heart Rate Variability HRV extracted from the wavelet package coefficients. The application of a wavelet package transform allows us to obtain a time-frequency representation of the signal, which provides better insight in the frequency distribution of the signal with time. A 6 level decomposition of HRV was achieved with db4 as mother wavelet, and the above two bands LF and HF were combined in 12 specialized frequencies sub-bands obtained in wavelet package transform. Features extracted from these coefficients can efficiently represent the characteristics of the original signal. ANOVA statistical test is used for the evaluation of proposed algorithm.

Kheder, G; Massoued, M Ben; Samet, M

2009-01-01T23:59:59.000Z

272

Apparatus and method for determining solids circulation rate  

DOE Patents [OSTI]

The invention relates to a method of determining bed velocity and solids circulation rate in a standpipe experiencing a moving packed bed flow, such as the in the standpipe section of a circulating bed fluidized reactor The method utilizes in-situ measurement of differential pressure over known axial lengths of the standpipe in conjunction with in-situ gas velocity measurement for a novel application of Ergun equations allowing determination of standpipe void fraction and moving packed bed velocity. The method takes advantage of the moving packed bed property of constant void fraction in order to integrate measured parameters into simultaneous solution of Ergun-based equations and conservation of mass equations across multiple sections of the standpipe.

Ludlow, J. Christopher (Morgantown, WV); Spenik, James L. (Morgantown, WV)

2012-02-14T23:59:59.000Z

273

Application Process and Eligibility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Program Application Process and Eligibility Application Process and Eligibility Both US and non-US citizens are eligible to apply, but US citizenship may be required for some...

274

SAGE Application Process  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Application Process SAGE Application Process A National Science Foundation Research Experiences for Undergraduates program Contacts Institute Director Harald Dogliani-Los Alamos...

275

Land Application of Manure A Supplement to Manure Management for Environmental Protection  

E-Print Network [OSTI]

Determining Mechanical Manure Application Rates on Horse Pastures For pastures where there will be grazing AND mechanical manure application, use the following procedure: 1. Determine if the rate is based on Nitrogen (Soil Test P Soil Test P >200 ppm or no soil test). 2. Find the "Grass Hay

Guiltinan, Mark

276

Land Application of Manure A Supplement to Manure Management for Environmental Protection  

E-Print Network [OSTI]

Determining Mechanical Manure Application Rates on GOAT Pastures For pastures where there will be grazing AND mechanical manure application, use the following procedure: 1. Determine if the rate is based on Nitrogen (Soil Test P Soil Test >200 ppm or no soil test). 2. Find the "Grass Hay" crop

Guiltinan, Mark

277

Land Application of Manure A Supplement to Manure Management for Environmental Protection  

E-Print Network [OSTI]

Determining Mechanical Manure Application Rates on DAIRY Pastures For pastures where there will be grazing AND mechanical manure application, use the following procedure: 1. Determine if the rate is based on Nitrogen (Soil Test P Soil Test >200 ppm or no soil test). 2. Find the "Grass Hay" crop

Guiltinan, Mark

278

Land Application of Manure A Supplement to Manure Management for Environmental Protection  

E-Print Network [OSTI]

Determining Mechanical Manure Application Rates on SHEEP Pastures For pastures where there will be grazing AND mechanical manure application, use the following procedure: 1. Determine if the rate is based on Nitrogen (Soil Test P Soil Test >200 ppm or no soil test). 2. Find the "Grass Hay" crop

Guiltinan, Mark

279

Land Application of Manure A Supplement to Manure Management for Environmental Protection  

E-Print Network [OSTI]

Determining Mechanical Manure Application Rates on BEEF Pastures For pastures where there will be grazing AND mechanical manure application, use the following procedure: 1. Determine if the rate is based on Nitrogen (Soil Test P Soil Test >200 ppm or no soil test). 2. Find the "Grass Hay" crop

Guiltinan, Mark

280

Critical reaction rates in hypersonic combustion chemistry  

SciTech Connect (OSTI)

High Mach number flight requires that the scramjet propulsion system operate at a relatively low static inlet pressure and a high inlet temperature. These two constraints can lead to extremely high temperatures in the combustor, yielding high densities of radical species and correspondingly poor chemical combustion efficiency. As the temperature drops in the nozzle expansion, recombination of these excess radicals can produce more product species, higher heat yield, and potentially more thrust. The extent to which the chemical efficiency can be enhanced in the nozzle expansion depends directly on the rate of the radical recombination reactions. A comprehensive assessment of the important chemical processes and an experimental validation of the critical rate parameters is therefore required if accurate predictions of scramjet performance are to be obtained. This report covers the identification of critical reactions, and the critical reaction rates in hypersonic combustion chemistry. 4 refs., 2 figs.

Oldenborg, R.C.; Harradine, D.M.; Loge, G.W.; Lyman, J.L.; Schott, G.L.; Winn, K.R.

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Relativistic QRPA calculation of muon capture rates  

E-Print Network [OSTI]

The relativistic proton-neutron quasiparticle random phase approximation (PN-RQRPA) is applied in the calculation of total muon capture rates on a large set of nuclei from $^{12}$C to $^{244}$Pu, for which experimental values are available. The microscopic theoretical framework is based on the Relativistic Hartree-Bogoliubov (RHB) model for the nuclear ground state, and transitions to excited states are calculated using the PN-RQRPA. The calculation is fully consistent, i.e., the same interactions are used both in the RHB equations that determine the quasiparticle basis, and in the matrix equations of the PN-RQRPA. The calculated capture rates are sensitive to the in-medium quenching of the axial-vector coupling constant. By reducing this constant from its free-nucleon value $g_A = 1.262$ by 10% for all multipole transitions, the calculation reproduces the experimental muon capture rates to better than 10% accuracy.

T. Marketin; N. Paar; T. Niksic; D. Vretenar

2009-03-30T23:59:59.000Z

282

Analytical Improvements in PV Degradation Rate Determination  

SciTech Connect (OSTI)

As photovoltaic (PV) penetration of the power grid increases, it becomes vital to know how decreased power output may affect cost over time. In order to predict power delivery, the decline or degradation rates must be determined accurately. For non-spectrally corrected data several complete seasonal cycles (typically 3-5 years) are required to obtain reasonably accurate degradation rates. In a rapidly evolving industry such a time span is often unacceptable and the need exists to determine degradation rates accurately in a shorter period of time. Occurrence of outliers and data shifts are two examples of analytical problems leading to greater uncertainty and therefore to longer observation times. In this paper we compare three methodologies of data analysis for robustness in the presence of outliers, data shifts and shorter measurement time periods.

Jordan, D. C.; Kurtz, S. R.

2011-02-01T23:59:59.000Z

283

HTGR Application Economic Model Users' Manual  

SciTech Connect (OSTI)

The High Temperature Gas-Cooled Reactor (HTGR) Application Economic Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Application Economic Model calculates either the required selling price of power and/or heat for a given internal rate of return (IRR) or the IRR for power and/or heat being sold at the market price. The user can generate these economic results for a range of reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for up to 16 reactor modules; and for module ratings of 200, 350, or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Application Economic Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Application Economic Model. This model was designed for users who are familiar with the HTGR design and Excel and engineering economics. Modification of the HTGR Application Economic Model should only be performed by users familiar with the HTGR and its applications, Excel, and Visual Basic.

A.M. Gandrik

2012-01-01T23:59:59.000Z

284

Achievable Qubit Rates for Quantum Information Wires  

E-Print Network [OSTI]

Suppose Alice and Bob have access to two separated regions, respectively, of a system of electrons moving in the presence of a regular one-dimensional lattice of binding atoms. We consider the problem of communicating as much quantum information, as measured by the qubit rate, through this quantum information wire as possible. We describe a protocol whereby Alice and Bob can achieve a qubit rate for these systems which is proportional to N^(-1/3) qubits per unit time, where N is the number of lattice sites. Our protocol also functions equally in the presence of interactions modelled via the t-J and Hubbard models.

Hulya Yadsan-Appleby; Tobias J. Osborne

2011-02-15T23:59:59.000Z

285

Neutrino Event Rates from Gamma Ray Bursts  

E-Print Network [OSTI]

We recalculate the diffuse flux of high energy neutrinos produced by Gamma Ray Bursts (GRB) in the relativistic fireball model. Although we confirm that the average single burst produces only ~10^{-2} high energy neutrino events in a detector with 1 km^2 effective area, i.e. about 10 events per year, we show that the observed rate is dominated by burst-to-burst fluctuations which are very large. We find event rates that are expected to be larger by one order of magnitude, likely more, which are dominated by a few very bright bursts. This greatly simplifies their detection.

F. Halzen; D. W. Hooper

1999-10-08T23:59:59.000Z

286

What Is the Right Rate? Loan Rates and Demand | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Neighborhood Program Financing Peer Exchange Call: "What is the Right Rate?" call slides and discussion summary, December 1, 2011. Call Slides and Discussion Summary More Documents...

287

Heart Rate Variability Malvin Carl Teich  

E-Print Network [OSTI]

Heart Rate Variability Malvin Carl Teich Boston University and Columbia University http, Grasmere, UK, 2005 #12;CONGESTIVE HEART FAILURE INABILITY OF HEART TO INCREASE CARDIAC OUTPUT IN PROPORTION of breath Swelling in legs General fatigue and weakness Clinical diagnostics: Ascultate heart Carotid pulse

Teich, Malvin C.

288

Tier 2 Vintage Rate Workshop II  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

I N I S T R A T I O N Proposed Access to Market-based Vintage Rate in FY 2014 Guaranteed: Load Following customer with <1 aMW of forecast Short-Term service in FY 2014: NA Load...

289

COMMODITY PRICE VOLATILITY ACROSS EXCHANGE RATE REGIMES  

E-Print Network [OSTI]

1 COMMODITY PRICE VOLATILITY ACROSS EXCHANGE RATE REGIMES John T. Cuddington* and Hong Liang** March 10, 2003 ABSTRACT This paper documents a new "stylized fact" regarding the relative price 1880 to 1996, this key relative price among two categories of tradable goods is shown to exhibit

290

Implications of Strong-Rate-Weakening Friction  

E-Print Network [OSTI]

Implications of Strong-Rate- Weakening Friction for the Length-Scale Dependence of the Strength · Rapid transitions between high static friction and very low dynamic friction · Leads to slip-pulse rupture · Slip pulses are extremely localized and have strong positive feedback between friction and slip

Greer, Julia R.

291

Heart Physiology Lab Part 1: Pulse Rate  

E-Print Network [OSTI]

Heart Physiology Lab Part 1: Pulse Rate Measure your pulse in each of the following conditions (in in the class. You may use Table 1 in the Heart Physiology Worksheet for this, if you wish. Once you have all of the class averages for each measurement. You may use Graph 1 in the Heart Physiology Worksheet for this

Loughry, Jim

292

Optimizing bit hydraulics increases penetration rate  

SciTech Connect (OSTI)

At some point, rate of penetration depends as much or more on hydraulics as on bit weight and rotary speed. An easy-to-follow graphical technique shows how to maximize ROP at the rig by finding the optimum pressure drop through the bit and the highest possible crossflow velocity.

Robinson, L.

1982-07-01T23:59:59.000Z

293

High temperature electrochemical corrosion rate probes  

SciTech Connect (OSTI)

Corrosion occurs in the high temperature sections of energy production plants due to a number of factors: ash deposition, coal composition, thermal gradients, and low NOx conditions, among others. Electrochemical corrosion rate (ECR) probes have been shown to operate in high temperature gaseous environments that are similar to those found in fossil fuel combustors. ECR probes are rarely used in energy production plants at the present time, but if they were more fully understood, corrosion could become a process variable at the control of plant operators. Research is being conducted to understand the nature of these probes. Factors being considered are values selected for the Stern-Geary constant, the effect of internal corrosion, and the presence of conductive corrosion scales and ash deposits. The nature of ECR probes will be explored in a number of different atmospheres and with different electrolytes (ash and corrosion product). Corrosion rates measured using an electrochemical multi-technique capabilities instrument will be compared to those measured using the linear polarization resistance (LPR) technique. In future experiments, electrochemical corrosion rates will be compared to penetration corrosion rates determined using optical profilometry measurements.

Bullard, Sophie J.; Covino, Bernard S., Jr.; Holcomb, Gordon R.; Ziomek-Moroz, M.

2005-09-01T23:59:59.000Z

294

Prediction of Thermonuclear Reaction Rates in Astrophysics  

E-Print Network [OSTI]

Recent improvements and remaining problems in the prediction of thermonuclear rates are reviewed. The main emphasis is on statistical model calculations, but the challenge to include direct reactions close to the driplines is also briefly addressed. Further theoretical as well as experimental investigations are motivated.

T. Rauscher

1998-10-15T23:59:59.000Z

295

Electric germs Source: scenta Rate this item  

E-Print Network [OSTI]

Electric germs Source: scenta Rate this item People in remote areas could benefit from fuel cells that contain bacteria that grows prolifically on the graphite anodes of fuel cells and can conduct electricity that isolating a bacterium generated pow er in fuel cells efficiently. Geobacter sulfurreducens is bacteria

Lovley, Derek

296

VARIABLE RATE NITROGEN Larry G. Bundy  

E-Print Network [OSTI]

-specific data from yield monitors · Soil electrical conductivity maps #12;During the growing season (reactive APPLICATIONS ·Before the growing season (proactive) ·During the growing season (reactive) Doerge (2001) #12 the growing season (reactive) strategies · Plant or canopy reflectance · Chlorophyll measurements · On

Balser, Teri C.

297

Improving energy efficiency via probabilistic rate combination in 802.11 multi-rate wireless networks  

E-Print Network [OSTI]

transmission. An alternative way to conserve energy is to apply power control [1­4]. A wireless node is allowedImproving energy efficiency via probabilistic rate combination in 802.11 multi-rate wireless in revised form 20 January 2009 Accepted 27 January 2009 Available online 6 February 2009 Keywords: Energy

Lui, John C.S.

298

Interpreting impedance spectra of organic photovoltaic cellsExtracting charge transit and recombination rates  

SciTech Connect (OSTI)

Impedance spectroscopy has been widely used to extract the electron-hole recombination rate constant in organic photovoltaic cells (OPVs). This technique is typically performed on OPVs held at open-circuit. Under these conditions, the analysis is simplified with recombination as the only pathway for the decay of excess charge carriers; transit provides no net change in the charge density. In this work, we generalize the application and interpretation of impedance spectroscopy for bulk heterojunction OPVs at any operating voltage. This, in conjunction with reverse bias external quantum efficiency measurements, permits the extraction of both recombination and transit rate constants. Using this approach, the transit and recombination rate constants are determined for OPVs with a variety of electron donor-acceptor pairings and compositions. It is found that neither rate constant individually is sufficient to characterize the efficiency of charge collection in an OPV. It is demonstrated that a large recombination rate constant can be accompanied by a large transit rate constant, thus fast recombination is not necessarily detrimental to OPV performance. Extracting the transit and recombination rate constants permits a detailed understanding of how OPV architecture and processing conditions impact the transient behavior of charge carriers, elucidating the origin of optimum device configurations.

Mullenbach, Tyler K.; Zou, Yunlong; Holmes, Russell J., E-mail: rholmes@umn.edu [Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455 (United States); Holst, James [New Products R and D, Sigma-Aldrich Corporation, 6000 N. Teutonia Avenue, Milwaukee, Wisconsin 53209 (United States)

2014-09-28T23:59:59.000Z

299

An atomistic methodology of energy release rate for graphene at nanoscale  

SciTech Connect (OSTI)

Graphene is a single layer of carbon atoms packed into a honeycomb architecture, serving as a fundamental building block for electric devices. Understanding the fracture mechanism of graphene under various conditions is crucial for tailoring the electrical and mechanical properties of graphene-based devices at atomic scale. Although most of the fracture mechanics concepts, such as stress intensity factors, are not applicable in molecular dynamics simulation, energy release rate still remains to be a feasible and crucial physical quantity to characterize the fracture mechanical property of materials at nanoscale. This work introduces an atomistic simulation methodology, based on the energy release rate, as a tool to unveil the fracture mechanism of graphene at nanoscale. This methodology can be easily extended to any atomistic material system. We have investigated both opening mode and mixed mode at different temperatures. Simulation results show that the critical energy release rate of graphene is independent of initial crack length at low temperature. Graphene with inclined pre-crack possesses higher fracture strength and fracture deformation but smaller critical energy release rate compared with the graphene with vertical pre-crack. Owing to its anisotropy, graphene with armchair chirality always has greater critical energy release rate than graphene with zigzag chirality. The increase of temperature leads to the reduction of fracture strength, fracture deformation, and the critical energy release rate of graphene. Also, higher temperature brings higher randomness of energy release rate of graphene under a variety of predefined crack lengths. The energy release rate is independent of the strain rate as long as the strain rate is small enough.

Zhang, Zhen; Lee, James D., E-mail: jdlee@gwu.edu [Department of Mechanical and Aerospace Engineering, the George Washington University, Washington, DC 20052 (United States); Wang, Xianqiao [College of Engineering, University of Georgia, Athens, Georgia 30602 (United States)

2014-03-21T23:59:59.000Z

300

ADONIS, high count-rate HP-Ge {gamma} spectrometry algorithm: Irradiated fuel assembly measurement  

SciTech Connect (OSTI)

ADONIS is a digital system for gamma-ray spectrometry, developed by CEA. This system achieves high count-rate gamma-ray spectrometry with correct dynamic dead-time correction, up to, at least, more than an incoming count rate of 3.10{sup 6} events per second. An application of such a system at AREVA NC's La Hague plant is the irradiated fuel scanning facility before reprocessing. The ADONIS system is presented, then the measurement set-up and, last, the measurement results with reference measurements. (authors)

Pin, P. [AREVA NC La Hague - Nuclear Measurement Team, 50444 Beaumont-Hague Cedex (France); Barat, E.; Dautremer, T.; Montagu, T. [CEA - Saclay, LIST, Electronics and Signal Processing Laboratory, 91191 Gif sur Yvette (France); Normand, S. [CEA - Saclay, LIST, Sensors and Electronic Architectures Laboratory, 91191 Gif sur Yvette (France)

2011-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Thermonuclear Reaction Rate of 23Mg(p,gamma)24$Al  

E-Print Network [OSTI]

Updated stellar rates for the reaction 23Mg(p,gamma)24Al are calculated by using all available experimental information on 24Al excitation energies. Proton and gamma-ray partial widths for astrophysically important resonances are derived from shell model calculations. Correspondences of experimentally observed 24Al levels with shell model states are based on application of the isobaric multiplet mass equation. Our new rates suggest that the 23Mg(p,gamma)24Al reaction influences the nucleosynthesis in the mass A>20 region during thermonuclear runaways on massive white dwarfs.

H. Herndl; M. Fantini; C. Iliades; P. M. Endt; H. Oberhummer

1998-06-05T23:59:59.000Z

302

Dynamic Line Rating Oncor Electric Delivery Smart Grid Program  

SciTech Connect (OSTI)

Electric transmission lines are the lifeline of the electric utility industry, delivering its product from source to consumer. This critical infrastructure is often constrained such that there is inadequate capacity on existing transmission lines to efficiently deliver the power to meet demand in certain areas or to transport energy from high-generation areas to high-consumption regions. When this happens, the cost of the energy rises; more costly sources of power are used to meet the demand or the system operates less reliably. These economic impacts are known as congestion, and they can amount to substantial dollars for any time frame of reference: hour, day or year. There are several solutions to the transmission constraint problem, including: construction of new generation, construction of new transmission facilities, rebuilding and reconductoring of existing transmission assets, and Dynamic Line Rating (DLR). All of these options except DLR are capital intensive, have long lead times and often experience strong public and regulatory opposition. The Smart Grid Demonstration Program (SGDP) project co-funded by the Department of Energy (DOE) and Oncor Electric Delivery Company developed and deployed the most extensive and advanced DLR installation to demonstrate that DLR technology is capable of resolving many transmission capacity constraint problems with a system that is reliable, safe and very cost competitive. The SGDP DLR deployment is the first application of DLR technology to feed transmission line real-time dynamic ratings directly into the system operations State Estimator and load dispatch program, which optimizes the matching of generation with load demand on a security, reliability and economic basis. The integrated Dynamic Line Rating (iDLR)1 collects transmission line parameters at remote locations on the lines, calculates the real-time line rating based on the equivalent conductor temperature, ambient temperature and influence of wind and solar radiation on the stringing section, transmits the data to the Transmission Energy Management System, validates its integrity and passes it on to Oncor and ERCOT (Electric Reliability Council of Texas) respective system operations. The iDLR system is automatic and transparent to ERCOT System Operations, i.e., it operates in parallel with all other system status telemetry collected through Supervisory Control and Data Acquisition (SCADA) employed across the company.

Johnson, Justin; Smith, Cale; Young, Mike; Donohoo, Ken; Owen, Ross; Clark, Eddit; Espejo, Raul; Aivaliotis, Sandy; Stelmak, Ron; Mohr, Ron; Barba, Cristian; Gonzalez, Guillermo; Malkin, Stuart; Dimitrova, Vessela; Ragsdale, Gary; Mitchem, Sean; Jeirath, Nakul; Loomis, Joe; Trevino, Gerardo; Syracuse, Steve; Hurst, Neil; Mereness, Matt; Johnson, Chad; Bivens, Carrie

2013-05-04T23:59:59.000Z

303

Muon capture rates within the projected QRPA  

E-Print Network [OSTI]

The conservation of the number of particles within the QRPA plays an important role in the evaluation muon capture rates in all light nuclei with A \\precsim 30 . The violation of the CVC by the Coulomb field in this mass region is of minor importance, but this effect could be quite relevant for medium and heavy nuclei studied previously. The extreme sensitivity of the muon capture rates on the 'pp' coupling strength in nuclei with large neutron excess when described within the QRPA is pointed out. We reckon that the comparison between theory and data for the inclusive muon capture is not a fully satisfactory test on the nuclear model that is used. The exclusive muon transitions are much more robust for such a purpose.

Danilo Sande Santos; Arturo R. Samana; Francisco Krmpoti?; Alejandro J. Dimarco

2012-03-03T23:59:59.000Z

304

Thermal dilepton rates from quenched lattice QCD  

E-Print Network [OSTI]

We present new lattice results on the continuum extrapolation of the vector current correlation function. Lattice calculations have been carried out in the deconfined phase at a temperature of 1.1 Tc, extending our previous results at 1.45 Tc, utilizing quenched non-perturbatively clover-improved Wilson fermions and light quark masses. A systematic analysis on multiple lattice spacings allows to perform the continuum limit of the correlation function and to extract spectral properties in the continuum limit. Our current analysis suggests the results for the electrical conductivity are proportional to the temperature and the thermal dilepton rates in the quark gluon plasma are comparable for both temperatures. Preliminary results of the continuum extrapolated correlation function at finite momenta, which relates to thermal photon rates, are also presented.

H. -T. Ding; A. Francis; O. Kaczmarek; F. Karsch; E. Laermann; S. Mukherjee; M. Mller; W. Soeldner

2013-01-30T23:59:59.000Z

305

IN-SERVICE LOAD & RESISTANCE FACTOR RATING METHOD FOR BRIDGES  

E-Print Network [OSTI]

Stress Rating method (noted ASR in the following), Load Factor Rating method (noted LFR in the followingIN-SERVICE LOAD & RESISTANCE FACTOR RATING METHOD FOR BRIDGES Degang Li1 , Baidurya Bhattacharya2 are evaluated using allowable stress and load factor rating methods. Load rating made in these traditional

Bhattacharya, Baidurya

306

UK now claims world's top discovery rate  

SciTech Connect (OSTI)

UK explorers are a bit more cheerful these days even though no one has discovered a giant field or anything elephant-sized. The reason is a benign tax regime and a growing confidence among industry explorers. This last has resulted in discovery of many smaller fields - particularly gas, some potentially commercial. It is claimed that the UK's discovery rate is now the highest in the world.

Not Available

1985-05-01T23:59:59.000Z

307

Energy loss rate in disordered quantum well  

SciTech Connect (OSTI)

We report the effect of dynamically screened deformation potential on the electron energy loss rate in disordered semiconductor quantum well. Interaction of confined electrons with bulk acoustic phonons has been considered in the deformation coupling. The study concludes that the dynamically screened deformation potential coupling plays a significant role as it substantially affects the power dependency of electron relaxation on temperature and mean free path.

Tripathi, P.; Ashraf, S. S. Z. [Centre of Excellence in Nanomaterials, Faculty of Engineering and Technology, Aligarh Muslim University, Aligarh-202002 (India); Hasan, S. T. [Physics Department, Faculty of Science, The M.S. University of Baroda, Vadodara-390002 (India); Sharma, A. C. [Physics Department, Sibli National College, Azamgarh-276128 (India)

2014-04-24T23:59:59.000Z

308

Subsurface heaters with low sulfidation rates  

DOE Patents [OSTI]

A system for heating a hydrocarbon containing formation includes a heater having an elongated ferromagnetic metal heater section. The heater is located in an opening in a formation. The heater section is configured to heat the hydrocarbon containing formation. The exposed ferromagnetic metal has a sulfidation rate that goes down with increasing temperature of the heater, when the heater is in a selected temperature range.

John, Randy Carl; Vinegar, Harold J

2013-12-10T23:59:59.000Z

309

Intraclass Price Elasticity & Electric Rate Design  

E-Print Network [OSTI]

INTRACLASS PRICE ELASTICITY &ELECTRIC RATE DESIGN KEVIN E. GRESHAM Senior Research Analyst Houston Lighting & Power Company Houston, Texas ABSTRACT PRICE ELASTICITY Electric ~ate design relies on cost incur rance for pricing and pricing... industries are already affecting electric utilities. Cogeneration is one example of competition which effects electric utilities. Utilities now have a competing source of generation which often causes load and revenue losses. Competition has specifically...

Gresham, K. E.

310

Decoherence rates for Galilean covariant dynamics  

E-Print Network [OSTI]

We introduce a measure of decoherence for a class of density operators. For Gaussian density operators in dimension one it coincides with an index used by Morikawa (1990). Spatial decoherence rates are derived for three large classes of the Galilean covariant quantum semigroups introduced by Holevo. We also characterize the relaxation to a Gaussian state for these dynamics and give a theorem for the convergence of the Wigner function to the probability distribution of the classical analog of the process.

Jeremy Clark

2008-04-02T23:59:59.000Z

311

STELLAR ENCOUNTER RATE IN GALACTIC GLOBULAR CLUSTERS  

SciTech Connect (OSTI)

The high stellar densities in the cores of globular clusters cause significant stellar interactions. These stellar interactions can produce close binary mass-transferring systems involving compact objects and their progeny, such as X-ray binaries and radio millisecond pulsars. Comparing the numbers of these systems and interaction rates in different clusters drives our understanding of how cluster parameters affect the production of close binaries. In this paper we estimate stellar encounter rates ({Gamma}) for 124 Galactic globular clusters based on observational data as opposed to the methods previously employed, which assumed 'King-model' profiles for all clusters. By deprojecting cluster surface brightness profiles to estimate luminosity density profiles, we treat 'King-model' and 'core-collapsed' clusters in the same way. In addition, we use Monte Carlo simulations to investigate the effects of uncertainties in various observational parameters (distance, reddening, surface brightness) on {Gamma}, producing the first catalog of globular cluster stellar encounter rates with estimated errors. Comparing our results with published observations of likely products of stellar interactions (numbers of X-ray binaries, numbers of radio millisecond pulsars, and {gamma}-ray luminosity) we find both clear correlations and some differences with published results.

Bahramian, Arash; Heinke, Craig O.; Sivakoff, Gregory R.; Gladstone, Jeanette C., E-mail: bahramia@ualberta.ca [Department of Physics, University of Alberta, CCIS 4-183, Edmonton, AB, T5K 1V4 (Canada)

2013-04-01T23:59:59.000Z

312

Heating Rate Profiles in Galaxy Clusters  

E-Print Network [OSTI]

In recent years evidence has accumulated suggesting that the gas in galaxy clusters is heated by non-gravitational processes. Here we calculate the heating rates required to maintain a physically motived mass flow rate, in a sample of seven galaxy clusters. We employ the spectroscopic mass deposition rates as an observational input along with temperature and density data for each cluster. On energetic grounds we find that thermal conduction could provide the necessary heating for A2199, Perseus, A1795 and A478. However, the suppression factor, of the clasical Spitzer value, is a different function of radius for each cluster. Based on the observations of plasma bubbles we also calculate the duty cycles for each AGN, in the absence of thermal conduction, which can provide the required energy input. With the exception of Hydra-A it appears that each of the other AGNs in our sample require duty cycles of roughly $10^{6}-10^{7}$ yrs to provide their steady-state heating requirements. If these duty cycles are unrealistic, this may imply that many galaxy clusters must be heated by very powerful Hydra-A type events interspersed between more frequent smaller-scale outbursts. The suppression factors for the thermal conductivity required for combined heating by AGN and thermal conduction are generally acceptable. However, these suppression factors still require `fine-tuning` of the thermal conductivity as a function of radius. As a consequence of this work we present the AGN duty cycle as a cooling flow diagnostic.

Edward C. D. Pope; Georgi Pavlovski; Christian R. Kaiser; Hans Fangohr

2006-01-05T23:59:59.000Z

313

Application of the SWAT Model to Bacterial Loading rates in Kranji Catchment, Singapore  

E-Print Network [OSTI]

Despite its tropical climate and abundant rainfall, Singapore is classified as a water scarce country. To protect its limited freshwater resources for both consumption and recreation, Singapore's Public Utilities Board ...

Bossis, Ryan Christopher

2011-01-01T23:59:59.000Z

314

One-dimensional fluid diffusion induced by constant-rate flow injection: Theoretical analysis and application  

E-Print Network [OSTI]

is essential in the exploitation of natural fluid resources, such as water, steam, petroleum, and natural gas advantages of our method are the reliability of the testing method, its economy of time, and the flexibility wastes. [3] In general, the nature of fluids in reservoir rocks can be characterized in terms of quantity

315

Application of Time-Of-Use Rates by an Air Separation Company  

E-Print Network [OSTI]

and stop liq efier operation in accordance with the time 0 day about mechanical stresses on our mach nery. However, we might do this on a weekly bas sand in fact this might allow us the opportun y to better match production with sales. I Tl...

Marlovits, E. S.

316

The Hierarchical Rater Model for Rated Test Items and its Application to Large-Scale Educational  

E-Print Network [OSTI]

items have become a standard part of the educational assessment landscape. Some achieve- ment targets

Junker, Brian

317

applications plasma rate-coefficients: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: Institute of Science, Rehovot 76100, Israel b Institute for Plasma Research, University of Maryland, College in plasmas have been developed, where the motion...

318

2007 Wholesale Power Rate Case Initial Proposal : Wholesale Power Rate Development Study.  

SciTech Connect (OSTI)

The Wholesale Power Rate Development Study (WPRDS) calculates BPA proposed rates based on information either developed in the WPRDS or supplied by the other studies that comprise the BPA rate proposal. All of these studies, and accompanying documentation, provide the details of computations and assumptions. In general, information about loads and resources is provided by the Load Resource Study (LRS), WP-07-E-BPA-01, and the LRS Documentation, WP-07-E-BPA-01A. Revenue requirements information, as well as the Planned Net Revenues for Risk (PNNR), is provided in the Revenue Requirement Study, WP-07-E-BPA-02, and its accompanying Revenue Requirement Study Documentation, WP-07-E-BPA-02A and WP-07-E-BPA-02B. The Market Price Forecast Study (MPFS), WP-07-E-BPA-03, and the MPFS Documentation, WP-07-E-BPA-03A, provide the WPRDS with information regarding seasonal and diurnal differentiation of energy rates, as well information regarding monthly market prices for Demand Rates. In addition, this study provides information for the pricing of unbundled power products. The Risk Analysis Study, WP-07-E-BPA-04, and the Risk Analysis Study Documentation, WP-07-E-BPA-04A, provide short-term balancing purchases as well as secondary energy sales and revenue. The Section 7(b)(2) Rate Test Study, WP-07-E-BPA-06, and the Section 7(b)(2) Rate Test Study Documentation, WP-07-E-BPA-06A, implement Section 7(b)(2) of the Northwest Power Act to ensure that BPA preference customers firm power rates applied to their general requirements are no higher than rates calculated using specific assumptions in the Northwest Power Act.

United States. Bonneville Power Administration.

2007-11-01T23:59:59.000Z

319

Experimental study on GaP surface damage threshold induced by a high repetition rate femtosecond laser  

SciTech Connect (OSTI)

The surface damage threshold of undoped bulk <110> GaP induced by a high repetition rate femtosecond pulse at 1040 nm with a duration of 61 fs was studied. The threshold value was obtained by a linear fit of the incident single pulse fluence and was confirmed with a breakdown test around the threshold level. The result will be useful in high intensity, high repetition rate laser applications and ultrafast processes.

Li Yi; Liu Feng; Li Yanfeng; Chai Lu; Xing Qirong; Hu Minglie; Wang Chingyue

2011-05-01T23:59:59.000Z

320

COMPARATIVE STUDIES OF PROTON ACCELERATORS FOR HIGH POWER APPLICATIONS.  

SciTech Connect (OSTI)

There are many applications requiring high power proton accelerators of various kinds. However, each type of proton accelerator can only provide beam with certain characteristics, hence the match of accelerators and their applications need careful evaluation. In this talk, the beam parameters and performance limitations of linac, cyclotron, synchrotron, and FFAG accelerators are studied and their relative merits for application in neutron, muon, neutrino, and ADS will be assessed in terms of beam energy, intensity, bunch length, repetition rate, and beam power requirements. A possible match between the applications and the accelerator of choice is presented in a matrix form. The accelerator physics and technology issues and challenges involved will also be discussed.

WENG, W.T.

2006-05-29T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Building Ultra-Low False Alarm Rate Support Vector Classifier Ensembles Using Random Subspaces  

SciTech Connect (OSTI)

This paper presents the Cost-Sensitive Random Subspace Support Vector Classifier (CS-RS-SVC), a new learning algorithm that combines random subspace sampling and bagging with Cost-Sensitive Support Vector Classifiers to more effectively address detection applications burdened by unequal misclassification requirements. When compared to its conventional, non-cost-sensitive counterpart on a two-class signal detection application, random subspace sampling is shown to very effectively leverage the additional flexibility offered by the Cost-Sensitive Support Vector Classifier, yielding a more than four-fold increase in the detection rate at a false alarm rate (FAR) of zero. Moreover, the CS-RS-SVC is shown to be fairly robust to constraints on the feature subspace dimensionality, enabling reductions in computation time of up to 82% with minimal performance degradation.

Chen, B Y; Lemmond, T D; Hanley, W G

2008-10-06T23:59:59.000Z

322

NFC Academic Access and Equipment Rates valid 7/1/13 to 6/30/14 RATES SUBJECT TO CHANGE  

E-Print Network [OSTI]

NFC Academic Access and Equipment Rates valid 7/1/13 to 6/30/14 RATES SUBJECT TO CHANGE ACCESS/USE UNITS RATE ACCESS FEE monthly fee $29.20 LAB USAGE FEE per lab session $24.44 LAB USAGE MAX PER MONTH per month $224.72 EQUIPMENT INCLUDED EQUIPMENT UNITS RATE 50% Rate Reduction After 500 min

Amin, S. Massoud

323

Santee-3-E Wholesale Power Rate Schedule | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Santee-3-E Wholesale Power Rate Schedule Santee-3-E Wholesale Power Rate Schedule Area: None System: Georgia-Alabama-South Carolina This rate schedule shall be available to public...

324

GTA TRIP GENERATION RATES, 1986 -1996 Eric J. Miller  

E-Print Network [OSTI]

GTA TRIP GENERATION RATES, 1986 - 1996 by Eric J. Miller Department of Civil Engineering University . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. CHANGES IN GTA TRIP GENERATION RATES, 1986-96 . . . . . . . . . . . . . . . . . . . . . 2 2 Time Female Labour Force Participation Rate

Toronto, University of

325

Integrated System Transmission and Ancillary Services Rate Calculation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transmission Rate 10 4.14 MillsKWh (L5 * 1000) 730 hours per month 7 RATE FOR SCHEDULING, SYSTEM CONTROL AND DISPATCH SERVICE FOR 2014 A. Fixed Charge Rate 22.770% (1)...

326

Integrated System Transmission and Ancillary Services Rate Calculation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transmission Rate 10 4.00 MillsKWh (L5 * 1000) 730 hours per month 7 RATE FOR SCHEDULING, SYSTEM CONTROL AND DISPATCH SERVICE FOR 2015 A. Fixed Charge Rate 21.652% (1)...

327

The breakthrough time and permeation rate of three organic chemicals for selected glove combinations  

E-Print Network [OSTI]

time and permeation rate when tested against three different challenge chemicals. PVC gloves with nitrile liners appeared to provide the most protection time against breakthrough for all three chemicals. The PVC gloves showed excellent resistance... with hazardous materials are protected by utilizing some form of chemically resistant clothing or gloves. These applications range from simple latex gloves to multilayered materials. Until the 1970's it was assumed that rubber or liquid proof gloves provided...

Binion, Pete Edwin

2012-06-07T23:59:59.000Z

328

APPLICATION CONSTRUCTION LEADERSHIP COURSE  

E-Print Network [OSTI]

APPLICATION CONSTRUCTION LEADERSHIP COURSE RECOMMENDATION FORM CON464 Construction Leadership: __________________________ To be considered for the Construction Leadership course submit the following: Application with description in the construction industry 5) If your GPA

Stephens, Graeme L.

329

Applications (Grid Tools)  

E-Print Network [OSTI]

Grid Fabric Software Grid Applications Core Grid Middleware User-Level Middleware (Grid Tools) !"# $ %& ' ( ) * #& + '& ' , - . / # ) ) 0 # * 1 PDB CDB Grid Fabric Hardware &+ '' + ) , '1 '1 ' % - * # ( Grid Fabric Software Grid Applications Core Grid Middleware User-Level Middleware (Grid Tools) !"# $ %& ' ( ) * #& + '& ' , - . / # ) ) 0

Buyya, Rajkumar

330

Uncertainty analysis of multi-rate kinetics of uranium desorption...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Uncertainty analysis of multi-rate kinetics of uranium desorption from sediments. Uncertainty analysis of multi-rate kinetics of uranium desorption from sediments. Abstract: A...

331

Auto/Steel Partnership: AHSS Stamping, Strain Rate Characterization...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AHSS Stamping, Strain Rate Characterization, Sheet Steel Fatigue, AHSS Joining AutoSteel Partnership: AHSS Stamping, Strain Rate Characterization, Sheet Steel Fatigue, AHSS...

332

Trends in Contractor Conversion Rates | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Contractor Conversion Rates Trends in Contractor Conversion Rates Better Buildings Residential Network Workforce Business Partners Peer Exchange Call Series: Trends in Contractor...

333

Burning Modes and Oxidation Rates of Soot: Relevance to Diesel...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Burning Modes and Oxidation Rates of Soot: Relevance to Diesel Particulate Traps Burning Modes and Oxidation Rates of Soot: Relevance to Diesel Particulate Traps Presentation given...

334

High Catalytic Rates for Hydrogen Production Using Nickel Electrocatal...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

High Catalytic Rates for Hydrogen Production Using Nickel Electrocatalysts with Seven-Membered Diphosphine Ligands Containing High Catalytic Rates for Hydrogen Production Using...

335

Fact #659: January 24, 2011 Fuel Economy Ratings for Vehicles...  

Energy Savers [EERE]

9: January 24, 2011 Fuel Economy Ratings for Vehicles Operating on Electricity Fact 659: January 24, 2011 Fuel Economy Ratings for Vehicles Operating on Electricity The...

336

Control Strategies for Centrifugal Pumps with Variable Flow Rate...  

Broader source: Energy.gov (indexed) [DOE]

Control Strategies for Centrifugal Pumps with Variable Flow Rate Requirements Control Strategies for Centrifugal Pumps with Variable Flow Rate Requirements This tip sheet discusses...

337

Fair rate assignment in interference limited multi-hop networks  

E-Print Network [OSTI]

Optimal Link Scheduling and Power Control in CDMA MultihopB. Shro?. , Joint rate control and scheduling in multihopthe joint rate control and scheduling problem, and [26

Arisoylu, Mustafa

2006-01-01T23:59:59.000Z

338

The Potential Benefits of Distributed Generation and the Rate...  

Broader source: Energy.gov (indexed) [DOE]

The Potential Benefits of Distributed Generation and the Rate-Related Issues That May Impede Its Expansion The Potential Benefits of Distributed Generation and the Rate-Related...

339

Blazar Flaring Rates Measured with GLAST  

E-Print Network [OSTI]

We derive the minimum observing time scales to detect a blazar at a given flux level with the LAT on GLAST in the scanning and pointing modes. Based upon Phase 1 observations with EGRET, we predict the GLAST detection rate of blazar flares at different flux levels. With some uncertainty given the poor statistics of bright blazars, we predict that a blazar flare with integral flux >~ 200e-8 ph(> 100 MeV) cm^{-2} s^{-1}, which are the best candidates for Target of Opportunity pointings and extensive temporal and spectral studies, should occur every few days.

Dermer, C D

2004-01-01T23:59:59.000Z

340

Binary Capture Rates for Massive Protostars  

E-Print Network [OSTI]

The high multiplicity of massive stars in dense, young clusters is established early in their evolution. The mechanism behind this remains unresolved. Recent results suggest that massive protostars may capture companions through disk interactions with much higher efficiency than their solar mass counterparts. However, this conclusion is based on analytic determinations of capture rates and estimates of the robustness of the resulting binaries. We present the results of coupled n-body and SPH simulations of star-disk encounters to further test the idea that disk-captured binaries contribute to the observed multiplicity of massive stars.

Nickolas Moeckel; John Bally

2007-04-09T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Reverse Engineering of Proteasomal Translocation Rates  

E-Print Network [OSTI]

We address the problem of proteasomal protein translocation and introduce a new stochastic model of the proteasomal digestion (cleavage) of proteins. In this model we account for the protein translocation and the positioning of cleavage sites of a proteasome from first principles. We show by test examples and by processing experimental data that our model allows reconstruction of the translocation and cleavage rates from mass spectroscopy data on digestion patterns and can be used to investigate the properties of transport in different experimental set-ups. Detailed investigation with this model will enable theoretical quantitative prediction of the proteasomal activity.

D. S. Goldobin; M. Mishto; K. Textoris-Taube; P. M. Kloetzel; A. Zaikin

2008-07-28T23:59:59.000Z

342

Blazar Flaring Rates Measured with GLAST  

E-Print Network [OSTI]

We derive the minimum observing time scales to detect a blazar at a given flux level with the LAT on GLAST in the scanning and pointing modes. Based upon Phase 1 observations with EGRET, we predict the GLAST detection rate of blazar flares at different flux levels. With some uncertainty given the poor statistics of bright blazars, we predict that a blazar flare with integral flux >~ 200e-8 ph(> 100 MeV) cm^{-2} s^{-1}, which are the best candidates for Target of Opportunity pointings and extensive temporal and spectral studies, should occur every few days.

C. D. Dermer; B. L. Dingus

2003-12-22T23:59:59.000Z

343

Utility Rates | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWende NewSowitec do BrasilGmbH Jump to:Rates Home Ewilson's

344

Tunneling decay rate in quantum cosmology  

E-Print Network [OSTI]

In canonical quantum cosmology, the wave function of the universe lacks explicit time dependence. However, time evolution may be present implicitly through the semiclassical superspace variables, which themselves depend on time in classical dynamics. In this paper, we apply this approach to an oscillating universe model recently introduced by Graham et al. By extending the model to include a massless, minimally coupled scalar field $\\phi$ which has little effect on the dynamics but can play the role of a "clock", we determine the decay rate of the oscillating universe.

Mithani, Audrey T

2015-01-01T23:59:59.000Z

345

Tunneling decay rate in quantum cosmology  

E-Print Network [OSTI]

In canonical quantum cosmology, the wave function of the universe lacks explicit time dependence. However, time evolution may be present implicitly through the semiclassical superspace variables, which themselves depend on time in classical dynamics. In this paper, we apply this approach to an oscillating universe model recently introduced by Graham et al. By extending the model to include a massless, minimally coupled scalar field $\\phi$ which has little effect on the dynamics but can play the role of a "clock", we determine the decay rate of the oscillating universe.

Audrey T. Mithani; Alexander Vilenkin

2015-03-02T23:59:59.000Z

346

Wholesale Power Rate Schedules | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun DengWISP SignInWho do I contact atRate

347

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111Jumpand PowerUtility Rate Home

348

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111Jumpand PowerUtility Rate

349

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate Home >

350

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate Home

351

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate Homeclean

352

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate HomecleanEIA

353

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate

354

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRateEZFeed Type

355

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRateEZFeed

356

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRateEZFeedUtility

357

gas rates | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR SolarZe-gen JumpZincZoomZougas rates

358

BPA Power Rates (pbl/main)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6 M. Babzien, I. Ben-Zvi, P. Study of SmartRates Announcements

359

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,Save Energy NowNew Hampshire AddressGRRUtility Rate Home >

360

Property:HeatRate | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:PlugNumberOfArraProjectTypeTopic2GrossGen JumpRating Jump

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Power Function Review (pbl/rates)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design PassivePostdoctoral Opportunities Are you YourRates >

362

PEER ADVISING APPLICATION PACKET  

E-Print Network [OSTI]

resume and the following application to 203 Peterson by Noon on Friday, October 10, 2014. Name: Student us about yourself? Applications and Resume Due: October 10, 2014 by Noon. Return completed Application & Resume to: Undergraduate Advising Office, 203 Peterson Hall #12;

363

Club/Org Name First name Last name City Project Area Primary Email Brentwood Night Riders Phyllis Elliott Hampton  

E-Print Network [OSTI]

@yahoo.com Chester Buckin' Buddies Tee DuBois Derry Horse, Communty Service, Leadership,Public speaking teemdubois@gmail.com Crazy 4 Canines Abby Beaulieu Kingston Project - ADG1 Dog (SCI-7), New Hampshire (state) abbybeaulieu Service, Citizenship, safety, Arts & Crafts, Photography, Public speaking canine.speaker@gmail.com Raymond

New Hampshire, University of

364

Microsoft Word - Advanced Solution Verification of CFD Solutions for LES of GTRF_Rider_August23.docx  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMappingENVIRONMENTAL IMPACT STATEMENTbelow).A NewACCOMMODATES ALL88

365

On the Annihilation Rate of WIMPs  

E-Print Network [OSTI]

We develop a formalism that allows one to systematically calculate the WIMP annihilation rate into gamma rays whose energy far exceeds the weak scale. A factorization theorem is presented which separates the radiative corrections stemming from initial state potential interactions from loops involving the final state. This separation allows us to go beyond the fixed order calculation, which is polluted by large infrared logarithms. For the case of Majorana WIMPs transforming in the adjoint representation of SU(2), we present the result for the resummed rate at leading double log accuracy in terms of two initial state partial wave matrix elements and one hard matching coefficient. For a given model, one may calculate the cross section by calculating the tree level matching coefficient and determining the value of a local four fermion operator. We find that the effects of resummation can be as large as 100% for a 20 TeV WIMP. The generalization of the formalism to other types of WIMPs is discussed.

Matthew Baumgart; Ira Z. Rothstein; Varun Vaidya

2014-10-29T23:59:59.000Z

366

Influence of wetting effect at the outer surface of the pipe on increase in leak rate - experimental results and discussion  

SciTech Connect (OSTI)

Experimental and computed results applicable to Leak Before Break analysis are presented. The specific area of investigation is the effect of the temperature distribution changes due to wetting of the test pipe near the crack on the increase in the crack opening area and leak rate. Two 12-inch straight pipes subjected to both internal pressure and thermal load, but not to bending load, are modelled. The leak rate was found to be very susceptible to the metal temperature of the piping. In leak rate tests, therefore, it is recommended that temperature distribution be measured precisely for a wide area.

Isozaki, Toshikuni; Shibata, Katsuyuki

1997-04-01T23:59:59.000Z

367

Screening Corrections to the Electron Capture Rates in Dense Stars by the Relativistically Degenerate Electron Liquid  

E-Print Network [OSTI]

We calculate the screening corrections to the electron capture rates in dense stars by the relativistically degenerate electron liquid. In order to calculate the screening corrections we adopt the linear response theory which is widely used in the field of solid state physics and liquid metal physics. In particular, we use the longitudinal dielectric function for the relativistically degenerate electron liquid derived by Jancovici. We calculate the screening potential at the position of the nucleus. By using this screening potential one can calculate the screening corrections to the electron capture rates. We will present accurate analytic fitting formulae which summarize our numerical results. These fitting formulae will facilitate the application of the present results. The screening corrections to the electron capture rates are typically a few percent.

Naoki Itoh; Nami Tomizawa; Masaya Tamamura; Shinya Wanajo; Satoshi Nozawa

2007-08-02T23:59:59.000Z

368

The star formation rate at redshift one: H-alpha spectroscopy with CIRPASS  

E-Print Network [OSTI]

We have conducted an H-alpha survey of 38 0.77rates (SFRs), with the near-infrared multi-object spectrograph CIRPASS on the WHT. This represents the first successful application of this technique to observing high redshift galaxies. Stacking the spectra in the rest-frame to infer a total SFR for the field, we find a lower limit (uncorrected for dust reddening) on the star formation rate density at redshift z = 1 of 0.04Msol/yr/Mpc^3. This implies rapid evolution in the star formation rate density from z = 0 to z = 1 which is proportional to (1+z)^{3.1}.

Michelle Doherty; Andrew Bunker; Robert Sharp; Gavin Dalton; Ian Parry; Ian Lewis

2006-04-27T23:59:59.000Z

369

Application Protocol Reference Architecture Application Protocol Reference Architecture  

E-Print Network [OSTI]

Application Protocol Reference Architecture 165 Chapter 7 Application Protocol Reference Architecture This chapter proposes an alternative reference architecture for application protocols. The proposed reference architecture consists of the set of possible architectures for application protocols

van Sinderen, Marten

370

ERIP application instructions  

SciTech Connect (OSTI)

This report provides background information and instructions to assist applicants in writing Energy-Related Inventions Program (ERIP) applications. Initial feedback fro usage for the new instructions shows that the best instructions would not be read and followed by all applicants. Applications from more than thirty applicants who have received the new instructions indicated that few had read the instructions. Based on this feedback, the instructions have been further revised to include a title page and table of contents. A warning was also added to advise applicants of the potential penalty of delayed review if these instructions are not followed. This revision was intended to address the possibility that some applicants did not see or bother to follow the instructions which followed the background information about ERIP. Included are two examples of ERIP applications which have been prepared for handout at workshops or mailing to applicants. Writing of example applications was time consuming and more difficult than expected for several reasons: (1) Full disclosures can be lengthy, very detailed, and technical. This contrasts with the desire to prepare examples which are comparatively short and easy for the non-technical person to read. (2) Disclosures contain confidential information which should not be published. (3) It is difficult to imagine that applicants will study examples when they do not bother to read the basic instructions.

Watt, D.M.

1992-01-02T23:59:59.000Z

371

Reverse-Engineering Banks' Financial Strength Ratings Using ...  

E-Print Network [OSTI]

Dec 27, 2006 ... reverse-engineering a superior bank rating system, which turns out to ...... sector (

mal92

2009-05-16T23:59:59.000Z

372

Implementation of home energy rating systems  

SciTech Connect (OSTI)

This paper presents the findings of a national survey of home energy rating and labelling programs (HERS). We discuss the nature of different implementation problems and the kinds of strategies that have been used to deal with them to ensure the effective penetration of HERS to all HERS-users. Of further special interest to us has been the nature of different delivery systems. We examined 34 HERS, located in 28 states: 13 of these were located in the southeast, 8 in the midwest, 5 in the northeast, 4 in the Pacific/mountain region, and 3 in the southwest. Although our survey does not represent a scientific sampling of HERS, we believe that the final distribution accurately reflects the distribution of HERS through the country and the full range of likely implementation and delivery programs.

Vine, E.; Barnes, B.K.; Ritschard, R.

1987-02-01T23:59:59.000Z

373

Bioremediation of oil-contaminated soil -- A rate model  

SciTech Connect (OSTI)

Three rate equations, a modified Monod equation and two mass transfer rate equations, were used to calculate the biodegradation rate, oxygen transfer rate and oil transfer rate during a bioremediation process of oil-contaminated soil. Based on experimental rate constants, these three rates were calculated and compared. It was found the bioremediation rate of oil-contaminated soil could be controlled by the mass transfer process of oil into aqueous solution (0.12 mg BOD/(1-h)). When the oil transfer rate is enhanced by at least 10 times, the oxygen transfer process (0.1--1.0 mg BOD/(1-h)) becomes the rate-controlling step. For most of the cases, the biodegradation of oil in aqueous solution is not the limiting step unless the microbial population in the aqueous solution is less than 100 mg VSS/1.

Li, K.Y.; Zhang, Y.; Xu, T. [Lamar Univ., Beaumont, TX (United States). Chemical Engineering Dept.] [Lamar Univ., Beaumont, TX (United States). Chemical Engineering Dept.

1995-12-31T23:59:59.000Z

374

Rates for Color Shifted Microlensing Events  

E-Print Network [OSTI]

If the objects responsible for gravitational microlensing (ML) of Galactic-bulge stars are faint dwarfs, then blended light from the lens will distort the shape of the ML light curve and shift the color of the observed star during the event. The resolution in current surveys is not accurate enough to observe this effect, but it should be detected with frequent and precise followup observations. We calculate the expected rates for ML events where the shape distortions will be observable by such followup observations, assuming that the lenses are ordinary main-sequence stars in a bar and in the disk. We study the dependence of the rates for color-shifted (CS) events on the frequency of followup observations and on the precision of the photometry for a variety of waveband pairings. We find that for hourly observations in $B$ and $K$ with typical photometric errors of 0.01 mag, 28\\% of the events where a main-sequence bulge star is lensed, and 7\\% of the events where the source is a bulge giant, will give rise to a measurable CS at the 95\\% confidence level. For observations in $V$ and $I$, the fractions become 18\\% and 5\\%, respectively, but may be increased to 40\\% and 13\\% by improved photometric accuracy and increased sampling frequency. We outline how the mass, distance, and transverse speed of the lens can be obtained, giving examples of typical errors. We discuss how CS events can be distinguished from events where the source is blended with a binary companion.

Ari Buchalter; Marc Kamionkowski; R. Michael Rich

1995-11-08T23:59:59.000Z

375

In-cell reaction rate distributions and cell-average reaction rates in fast critical assemblies  

SciTech Connect (OSTI)

Measurements are described for determining average values of fission rates in /sup 235/U, /sup 238/U and /sup 239/Pu and capture rates in /sup 238/U for heterogeneous cells used to construct fast critical assemblies. The measurements are based on irradiations of foils of /sup 238/U, /sup 235/U and /sup 239/Pu with counting of fission and capture products using gamma-ray spectroscopy. Both plate and pin cells are considered. Procedures are described for inferring cell-average reaction rate values from a single foil location based on a cell using a quantity called a cell factor. Cell factors are determined from special measurements in which several foils are irradiated within a cell. Comparisons are presented between cell factors determined by measurements and by Monte Carlo calculations which lend credibility to the measurement procedures.

Brumbach, S.B.; Gasidlo, J.M.

1985-08-01T23:59:59.000Z

376

Loading rate dependency of maximum nanoindentation depth in nano-grained NiTi shape memory alloy  

E-Print Network [OSTI]

of loading rate on nanoindentation depth for nano-grained polycrystalline superelastic (SE) NiTi SMA superelastic NiTi polycrystalline sheets were purchased from Memory Applications Inc. (USA). With X temperature (T=23 C). To avoid plastic deformation under the tip, two spherical diamond tips with radii of R

Sun, Qing-Ping

377

NFC Industrial Access and Equipment Rates valid 7/1/13 to 6/30/14 RATES SUBJECT TO CHANGE  

E-Print Network [OSTI]

NFC Industrial Access and Equipment Rates valid 7/1/13 to 6/30/14 RATES SUBJECT TO CHANGE ACCESS/USE UNITS RATE ACCESS FEE monthly fee $91.00 LAB USAGE FEE per lab session $67.50 LAB USAGE MAX PER MONTH per month $631.00 EQUIPMENT INCLUDED EQUIPMENT UNITS RATE ALDATOMIC LAYER DEP ALD Savannah 200 minute

Amin, S. Massoud

378

Technical applications of aerogels  

SciTech Connect (OSTI)

Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

Hrubesh, L.W.

1997-08-18T23:59:59.000Z

379

A New Series of Rate Decline Relations Based on the Diagnosis of Rate-Time Data  

E-Print Network [OSTI]

functional for the b-parameter. The next step of this procedure is to test and validate each of the rate decline relations by applying them to various numerical simulation cases (for gas), as well as for field data cases obtained from tight/shale gas...

Boulis, Anastasios

2010-01-14T23:59:59.000Z

380

Recovery Act: Energy Efficiency of Data Networks through Rate Adaptation (EEDNRA) - Final Technical Report  

SciTech Connect (OSTI)

This Concept Definition Study focused on developing a scientific understanding of methods to reduce energy consumption in data networks using rate adaptation. Rate adaptation is a collection of techniques that reduce energy consumption when traffic is light, and only require full energy when traffic is at full provisioned capacity. Rate adaptation is a very promising technique for saving energy: modern data networks are typically operated at average rates well below capacity, but network equipment has not yet been designed to incorporate rate adaptation. The Study concerns packet-switching equipment, routers and switches; such equipment forms the backbone of the modern Internet. The focus of the study is on algorithms and protocols that can be implemented in software or firmware to exploit hardware power-control mechanisms. Hardware power-control mechanisms are widely used in the computer industry, and are beginning to be available for networking equipment as well. Network equipment has different performance requirements than computer equipment because of the very fast rate of packet arrival; hence novel power-control algorithms are required for networking. This study resulted in five published papers, one internal report, and two patent applications, documented below. The specific technical accomplishments are the following: A model for the power consumption of switching equipment used in service-provider telecommunication networks as a function of operating state, and measured power-consumption values for typical current equipment. An algorithm for use in a router that adapts packet processing rate and hence power consumption to traffic load while maintaining performance guarantees on delay and throughput. An algorithm that performs network-wide traffic routing with the objective of minimizing energy consumption, assuming that routers have less-than-ideal rate adaptivity. An estimate of the potential energy savings in service-provider networks using feasibly-implementable rate adaptivity. A buffer-management algorithm that is designed to reduce the size of router buffers, and hence energy consumed. A packet-scheduling algorithm designed to minimize packet-processing energy requirements. Additional research is recommended in at least two areas: further exploration of rate-adaptation in network switching equipment, including incorporation of rate-adaptation in actual hardware, allowing experimentation in operational networks; and development of control protocols that allow parts of networks to be shut down while minimizing disruption to traffic flow in the network. The research is an integral part of a large effort within Bell Laboratories, Alcatel-Lucent, aimed at dramatic improvements in the energy efficiency of telecommunication networks. This Study did not explicitly consider any commercialization opportunities.

Matthew Andrews; Spyridon Antonakopoulos; Steve Fortune; Andrea Francini; Lisa Zhang

2011-07-12T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

High-Purity Germanium Spectroscopy at Rates in Excess of 10^{6} Events/s  

SciTech Connect (OSTI)

AbstractIn gamma spectroscopy, a compromise must be made between energy resolution and event-rate capability. Some foreseen nuclear material safeguards applications require a spectrometer with energy resolution typical of high purity germanium (HPGe) detectors, operated at rates up to and exceeding 106 events per second. We report the performance of an HPGe spectrometer adapted to run at such rates. Our system consists of a commercial semi-coaxial HPGe detector, a modified high-voltagerail, resistive-feedback, charge-sensitive preamplifier and a continuous waveform digitizer. Digitized waveforms are analyzed offline with a novel time-variant trapezoidal filter algorithm. Several time-invariant trapezoidal filters are run in parallel and the slowest one not rejected by instantaneous pileup conditions is used to measure each pulse height. We have attained full-widthat- half-maximum energy resolution of less than 8 keV measured at 662 keV with 1:08*106 per second incoming event rate and 38% throughput. An additional constraint on the width of the fast trigger filter removes a significant amount of edge pileup that passes the first pileup cut, reducing throughput to 26%. While better resolution has been reported by other authors, our throughput is over an order of magnitude higher than any other reported HPGe system operated at such an event rate.

VanDevender, Brent A.; Dion, Michael P.; Fast, James E.; Rodriguez, Douglas C.; Taubman, Matthew S.; Wilen, Christopher D.; Wood, Lynn S.; Wright, Michael E.

2014-10-05T23:59:59.000Z

382

Space Science and Applications  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 Space Science and Applications Applying world-class expertise in space sciences and associated technologies to detect and characterize national security threats Contacts Group...

383

Computational Optimization and Applications  

E-Print Network [OSTI]

Pitman Advanced Publishing Program, Boston, 1984. [10] M. Hanke, Regularizing Levenberg-Marquardt scheme, with applications to inverse groundwater. 19. 1.

15

2015-04-02T23:59:59.000Z

384

Application of solar energy.  

E-Print Network [OSTI]

??The purpose of the project is to learn the principle and application of solar energy and to know the situation of solar energy in China (more)

Li, Jingcheng

2010-01-01T23:59:59.000Z

385

Application Power Signature Analysis  

SciTech Connect (OSTI)

The high-performance computing (HPC) community has been greatly concerned about energy efficiency. To address this concern, it is essential to understand and characterize the electrical loads of HPC applications. In this work, we study whether HPC applications can be distinguished by their power-consumption patterns using quantitative measures in an automatic manner. Using a collection of 88 power traces from 4 different systems, we find that basic statistical measures do a surprisingly good job of summarizing applications' distinctive power behavior. Moreover, this study opens up a new area of research in power-aware HPC that has a multitude of potential applications.

Hsu, Chung-Hsing [ORNL] [ORNL; Combs, Jacob [Sonoma State University] [Sonoma State University; Nazor, Jolie [Sonoma State University] [Sonoma State University; Santiago, Fabian [Sonoma State University] [Sonoma State University; Thysell, Rachelle [Sonoma State University] [Sonoma State University; Rivoire, Suzanne [Sonoma State University] [Sonoma State University; Poole, Stephen W [ORNL] [ORNL

2014-01-01T23:59:59.000Z

386

ANALYTICAL STAR FORMATION RATE FROM GRAVOTURBULENT FRAGMENTATION  

SciTech Connect (OSTI)

We present an analytical determination of the star formation rate (SFR) in molecular clouds, based on a time-dependent extension of our analytical theory of the stellar initial mass function. The theory yields SFRs in good agreement with observations, suggesting that turbulence is the dominant, initial process responsible for star formation. In contrast to previous SFR theories, the present one does not invoke an ad hoc density threshold for star formation; instead, the SFR continuously increases with gas density, naturally yielding two different characteristic regimes, thus two different slopes in the SFR versus gas density relationship, in agreement with observational determinations. Besides the complete SFR derivation, we also provide a simplified expression, which reproduces the complete calculations reasonably well and can easily be used for quick determinations of SFRs in cloud environments. A key property at the heart of both our complete and simplified theory is that the SFR involves a density-dependent dynamical time, characteristic of each collapsing (prestellar) overdense region in the cloud, instead of one single mean or critical freefall timescale. Unfortunately, the SFR also depends on some ill-determined parameters, such as the core-to-star mass conversion efficiency and the crossing timescale. Although we provide estimates for these parameters, their uncertainty hampers a precise quantitative determination of the SFR, within less than a factor of a few.

Hennebelle, Patrick [Laboratoire de Radioastronomie, UMR CNRS 8112, Ecole Normale Superieure et Observatoire de Paris, 24 rue Lhomond, 75231 Paris Cedex 05 (France); Chabrier, Gilles [Ecole Normale Superieure de Lyon, CRAL, UMR CNRS 5574, 69364 Lyon Cedex 07 (France)

2011-12-20T23:59:59.000Z

387

Minimizing Variation in Outdoor CPV Power Ratings: Preprint  

SciTech Connect (OSTI)

The CPV community has agreed to have both indoor and outdoor power ratings at the module level. The indoor rating provides a repeatable measure of module performance as it leaves the factory line while the outdoor rating provides a measure of true performance under real world conditions. The challenge with an outdoor rating is that the spectrum, temperature, wind speed, etc are constantly in flux and therefore the resulting power rating varies from day to day and month to month. This work examines different methodologies for determining the outdoor power rating with the goal of minimizing variation even if data are collected under changing meteorological conditions.

Muller, M.; Marion, B.; Rodriguez, J.; Kurtz, S.

2011-07-01T23:59:59.000Z

388

A new modified-rate approach for gas-grain chemical simulations  

E-Print Network [OSTI]

Understanding grain-surface processes is crucial to interpreting the chemistry of the ISM. However, accurate surface chemistry models are computationally expensive and are difficult to integrate with gas-phase simulations. A new modified-rate method for solving grain-surface chemical systems is presented. Its purpose is accurately to model highly complex systems that can otherwise only be treated using the sometimes inadequate rate-equation approach. In contrast to previous rate-modification techniques, the functional form of the surface production rates was modified, and not simply the rate coefficient. This form is appropriate to the extreme "small-grain" limit, and can be verified using an analytical master-equation approach. Various further modifications were made to this basic form, to account for competition between processes, to improve estimates of surface occupation probabilities, and to allow a switch-over to the normal rate equations where these are applicable. The new method was tested against systems solved previously using exact techniques. Even the simplest method is quite accurate, and a great improvement over rate equations. Further modifications allow the master-equation results to be reproduced exactly for the methanol-producing system, within computational accuracy. Small discrepancies arise when non-zero activation energies are assumed for the methanol system, which result from complex reaction-competition processes that cannot be resolved easily without using exact methods. Inaccuracies in computed abundances are never greater than a few tens of percent, and typically of the order of one percent, in the most complex systems tested. Implementation of the method in simple networks, including hydrogen-only systems, is trivial, whilst the results are highly accurate.

R. T. Garrod

2008-09-17T23:59:59.000Z

389

U.S. MOTORCYCLE USE:1 CRASH EXPERIENCES, SAFETY PERSPECTIVES, AND COUNTERMEASURES2  

E-Print Network [OSTI]

1 U.S. MOTORCYCLE USE:1 CRASH EXPERIENCES, SAFETY PERSPECTIVES, AND COUNTERMEASURES2 3 4 Daniel J Words: Motorcycle use, safety survey, rider perceptions, helmet use, motorcyclist training,25 crash rates26 27 ABSTRACT28 29 Motorcycles are an important form of personal transportation pursued by many

Kockelman, Kara M.

390

act transportation rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

rates are calculated and compared. The ortho- isomer has a very small rate of transport. 1999 Ferreira, Mrcia M. C. 89 2008 James L. Oberstar Forum on Transportation Policy...

391

Enhancing the Lithiation Rate of Silicon Nanowires by the Inclusion...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Enhancing the Lithiation Rate of Silicon Nanowires by the Inclusion of Tin. Enhancing the Lithiation Rate of Silicon Nanowires by the Inclusion of Tin. Abstract: Silicon (Si) has a...

392

Essays on Real Exchange Rates and Theoretical Monetary Aggregation  

E-Print Network [OSTI]

This dissertation is a collection of three essays focused on real exchange rates and theoretical monetary aggregation. The first essay focused on the convergence of real exchange rates' idiosyncratic effects after isolating ...

Zheng, Mingming

2014-05-31T23:59:59.000Z

393

Big changes in liquidity - how they affect power rates  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

lot of help from its customers, BPA was able to reduce its FY 2007-2009 power rates from those in the prior rate period while still meeting its fi nancial standards and legal...

394

Deforestation in Brazilian Amazonia: History, Rates, and Consequences  

E-Print Network [OSTI]

Deforestation in Brazilian Amazonia: History, Rates, and Consequences PHILIP M. FEARNSIDE Instituto of deforestation began with the inauguration of the Transamazon Highway in 1970. Amazonian deforestation rates have that make deforestation profitable. Forest degradation results from logging, ground fires (facilitated

Gottgens, Hans

395

Utility Rate Design Revision - A Frisbee Full of Boomerangs  

E-Print Network [OSTI]

Rising electricity prices have prompted investigation of utility rates and proposals for changed in their design. The purpose of this paper is to discuss the current design of electric rates, changes proposed, actual trends, and predictable results...

Dannenmaier, J. H.

1979-01-01T23:59:59.000Z

396

Microsoft Word - News Release -- Rates Initial Proposal Dec ...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

utilities, the Bonneville Power Administration today proposed a 6.7 percent average wholesale power rate increase for the fiscal year 2016-2017 rate period. BPA is also proposing...

397

From: Sent: Subject: Attachments: SNR-Rates, SNR  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

SNR - Rates From: Sent: Subject: Attachments: SNR-Rates, SNR Friday, August 22, 2014 3:03 PM 2015 Initial Power Restoration Fund Obligation FY 2015 Initial Restoration Fund Letter...

398

Inflation targeting in emerging countries: the exchange rate issues  

E-Print Network [OSTI]

The current discussion of Inflation Targeting (IT) in emerging economies deals with the effects that nominal exchange rate movements have on the overall inflation rate. The literature has focused in the analysis of the advantages and disadvantages...

Reyes Altamirano, Javier Arturo

2004-09-30T23:59:59.000Z

399

Rangeland Drought Management for Texans: Stocking Rate and Grazing Management  

E-Print Network [OSTI]

This publication explains how stocking rates and grazing management decisions can help a ranch survive a drought. To deal with drought, a rancher must monitor forage supply and demand; use a conservative stocking rate and keep it flexible...

Hart, Charles R.; Carpenter, Bruce B.

2001-05-03T23:59:59.000Z

400

Cost of Service and Rate Design Issues Affecting Industrial Customers in Retail Rate Proceedings  

E-Print Network [OSTI]

alternative is not selected, or when the selected capacity expansion plan results in excess generation. A reduction in invested capital will reduce the system revenue requirements. The rate of return is equal to the sum of the weighted cost of debt plus... the position that the cost of all or part of an imprudent management decision should be borne by the stockholder. Prudency issues are usually raised when the cost of new generation units are excessive, when the most economic generation expansion...

Stover, C. N. Jr.

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Flow Rate Estimates Qs and As Q: What is the Flow Rate Technical Group?  

E-Print Network [OSTI]

to the BP oil spill in the Gulf of Mexico be stepped up as a result of the new flow rate estimates released their initial estimate. · The first approach analyzed how much oil is on the surface of the Gulf of Mexico using,000 and 270,000 barrels of oil are on the surface of the Gulf of Mexico and that a similar amount had already

Fleskes, Joe

402

Property:OpenEI/UtilityRate/EnergyRateStructure/Tier6Sell | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to: navigation, search This isInformation Rate

403

Rate Control Management of Atrial Fibrillation: May a Mathematical Model Suggest an Ideal Heart Rate?  

E-Print Network [OSTI]

Background. Despite the routine prescription of rate control therapy for atrial fibrillation (AF), clinical evidence demonstrating a heart rate target is lacking. Aim of the present study was to run a mathematical model simulating AF episodes with a different heart rate (HR) to predict hemodynamic parameters for each situation. Methods. The lumped model, representing the pumping heart together with systemic and pulmonary circuits, was run to simulate AF with HR of 50, 70, 90, 110 and 130 bpm, respectively. Results. Left ventricular pressure increased by 56.7%, from 33.92+-37.56 mmHg to 53.15+-47.56 mmHg, and mean systemic arterial pressure increased by 27.4%, from 82.66+-14.04 mmHg to 105.29+-7.63 mmHg, at the 50 and 130 bpm simulations, respectively. Stroke volume (from 77.45+-8.5 to 39.09+-8.08 mL), ejection fraction (from 61.1+-4.4 to 39.32+-5.42%) and stroke work (SW, from 0.88+-0.04 to 0.58+-0.09 J) decreased by 49.5, 35.6 and 34.2%, at the 50 and 130 bpm simulations, respectively. In addition, oxygen co...

Anselmino, Matteo; Camporeale, Carlo; Saglietto, Andrea; Gaita, Fiorenzo; Ridolfi, Luca

2015-01-01T23:59:59.000Z

404

Rate-adaptive H.264 for TCP/IP networks  

E-Print Network [OSTI]

While there has always been a tremendous demand for streaming video over TCP/IP networks, the nature of the application still presents some challenging issues. These applications that transmit multimedia data over best-effort networks like...

Kota, Praveen

2007-09-17T23:59:59.000Z

405

Minimizing Variation in Outdoor CPV Power Ratings (Presentation)  

SciTech Connect (OSTI)

Module data from NREL's CPV test bed is used to examine methods for calculating outdoor CPV power ratings. IEC 62670 and ASTM E2527 are used as a starting point for determining a module power rating on a monthly basis. Monthly power ratings vary by more than desired using existing methods. The presentation examines modifications to existing methods as well as spectral corrections to reduce variation in monthly module power ratings.

Muller, M.

2011-02-01T23:59:59.000Z

406

HEART RATE VARIABILITY AS DETERMINISM WITH JUMP STOCHASTIC PARAMETERS  

E-Print Network [OSTI]

HEART RATE VARIABILITY AS DETERMINISM WITH JUMP STOCHASTIC PARAMETERS JIONGXUAN ZHENG, JOE SKUFCA, AND ERIK BOLLT§ Abstract. We use measured heart rate information (RR intervals) to develop a one with persistence which causes the heart rate and rhythm system to wander about a bifurcation point. We propose

Bollt, Erik

407

Heart Rate Dynamics Before Spontaneous Onset of Ventricular  

E-Print Network [OSTI]

Heart Rate Dynamics Before Spontaneous Onset of Ventricular Fibrillation in Patients With Healed V. Huikuri, MD The traditional methods of analyzing heart rate (HR) variability have failed myocardial infarction has been shown to be in- creased in patients with reduced heart rate (HR) vari- ability

408

Modeling of strain rate effects on clay in simple shear  

E-Print Network [OSTI]

strength and log scale of strain rate. To include the effects of strain rate, the modified simple effective stress model starts with two assumptions: (1) a specific shear strength corresponds to a specific strain rate in a unique relation; and (2...

Jung, Byoung Chan

2006-08-16T23:59:59.000Z

409

EIS-0093: Bonneville Power Administration's 1982 Rate Proposal  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy's Bonneville Power Administration prepared this statement to evaluate the potential environmental impacts associated with an increase in wholesale power rates for calendar year 1982, including the effects of rate hikes in that year, the cumulative effects of rate hikes from 1979-1985, as well as alternative revenue scenarios.

410

EIS-0102: Bonneville Power Administration's 1983 Wholesale Power Rate  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy's Bonneville Power Administration prepared this EIS to evaluate the potential environmental impacts associated with an increase in wholesale power rates that would become effective on November 1, 1983, including the effects of rate hikes in that year and the cumulative effects of previous rate hikes.

411

An Evolutionary Reduction Principle for Mutation Rates at Multiple Loci  

E-Print Network [OSTI]

An Evolutionary Reduction Principle for Mutation Rates at Multiple Loci Lee Altenberg altenber of the reduction principle is found: reduction results at individual loci combine topologically to produce to the reduction principle, and under fine tuning of mutation rates would be expected to have higher mutation rates

Altenberg, Lee

412

EXPLAINING OUTCROSSING RATE IN CAMPANULASTRUM AMERICANUM (CAMPANULACEAE): GEITONOGAMY  

E-Print Network [OSTI]

SELF-INCOMPATIBILITY Leah J. Kruszewski and Laura F. Galloway1 Department of Biology, University, the high outcrossing rate could result from cryptic self-incompatibility, a mechanism that favors outcross differential growth rates of self and outcross pollen tubes produce cryptic self-incompatibility. Growth rates

Galloway, Laura F.

413

Chukwuemeka I. Okoye Carbon Dioxide Solubility and Absorption Rate in  

E-Print Network [OSTI]

Copyright by Chukwuemeka I. Okoye 2005 #12;Carbon Dioxide Solubility and Absorption Rate _______________________ Nicholas A. Peppas #12;Carbon Dioxide Solubility and Absorption Rate in Monoethanolamine/Piperazine/H2O for. #12;iii Carbon Dioxide Solubility and Absorption Rate in Monoethanolamine/Piperazine/H2O

Rochelle, Gary T.

414

Real-Time Measurement of Rates of Outdoor Airflow into HVACSystems: A Field Study of Three Technologies  

SciTech Connect (OSTI)

Technologies for real-time continuous measurement of the flow rates of outdoor air (OA) into HVAC systems are now available commercially. Our prior papers reported on laboratory-based evaluations of these measurement technologies and this document describes the methods and results of a field study of the accuracy of three of these technologies. From the field study data, we determined that neither wind speed nor wind direction have an important adverse impact on measurement accuracy. The field study confirmed that these three measurement technologies can provide reasonably accurate measurements of outdoor air intake rates in field settings, if the pressure signals are measured with high accuracy. Some of the pressure transducers marketed for use with commercial HVAC systems were determined to be sufficiently accurate for this application. Given the significant impact of OA flow rates on both energy use and occupant health, more widespread use of technologies that provide for real time measurements of OA flow rates seems warranted.

Fisk, William J.; Sullivan, Douglas P.; Faulkner, David

2005-09-01T23:59:59.000Z

415

Attack of the Clones: Detecting Cloned Applications on Android Markets  

E-Print Network [OSTI]

subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energys National Nuclear Security as many as seven times. DNADroid has a very low false positive rate -- we manually confirmed that all, but much of the user experience relies on third-party applications. To this end, Android has numerous

Chen, Hao

416

Strategic Rate Design: The Role of Industrial Tariffs  

E-Print Network [OSTI]

utilities have as a primary objective the goal of setting rates that fully reflect costs. Even within this constraint, alternative pricing mechanisms are available to allow the utility to engage in strategic rate design. For example, time-of-use rates... to the same MW made up of several smaller-sized units, the larger-sized contracts are charged at a higher rate. The rate for the energy charge depends on time of use and a liberal tilt of the capacity costs into the energy charge provides the customer a...

Rosenblum, J. I.; House, R.

417

Optimization of well rates under gas coning conditions  

E-Print Network [OSTI]

production rates under gas caning conditions. This new method applies to an oil reservoir overlain by a large gas cap containing multiple wells. The cases consider have a limit on the maximum field production rate for both oil and gas. It was found... that the optimal p~ion rates are achieved when Eq. 1 is satisfied for any pair of wells i and j: ) I = constant i = 1, . . . , n dqo This condition minimizes the f ield gas production rate when the maximum field production rate for oil is met, and maximizes...

Urbanczyk, Christopher Henry

1989-01-01T23:59:59.000Z

418

STANFORD IN-SITU HIGH RATE YBCO PROCESS: TRANSFER TO METAL TAPES AND PROCESS SCALE UP  

SciTech Connect (OSTI)

Executive Summary The materials science understanding of high rate low cost processes for Coated Conductor will benefit the application to power utilities for low loss energy transportation and power generation as well for DOD applications. The research in this program investigated several materials processing approaches that are new and original, and are not being investigated elsewhere. This work added to the understanding of the material science of high rate PVD growth of HTSC YBCO assisted by a liquid phase. A new process discovered uses amorphous glassy precursors which can be made at high rate under flexible conditions of temperature and oxygen, and later brought to conditions of oxygen partial pressure and temperature for rapid conversion to YBCO superconductor. Good critical current densities were found, but further effort is needed to optimize the vortex pinning using known artificial inclusions. A new discovery of the physics and materials science of vortex pinning in the HTSC system using Sm in place of Y came at growth at unusually low oxygen pressure resulting in clusters of a low or non superconducting phase within the nominal high temperature phase. The driving force for this during growth is new physics, perhaps due to the low oxygen. This has the potential for high current in large magnetic fields at low cost, applicable to motors, generators and transformers. The technical demands of this project were the motivation for the development of instrumentation that could be essential to eventual process scale up. These include atomic absorption based on tunable diode lasers for remote monitoring and control of evaporation sources (developed under DARPA support), and the utility of Fourier Transform Infrared Reflectivity (FTIR) for aid in the synthesis of complex thin film materials (purchased by a DURIP-AFOSR grant).

Malcolm R. Beasley; Robert H.Hammond

2009-04-14T23:59:59.000Z

419

Wind energy applications guide  

SciTech Connect (OSTI)

The brochure is an introduction to various wind power applications for locations with underdeveloped transmission systems, from remote water pumping to village electrification. It includes an introductory section on wind energy, including wind power basics and system components and then provides examples of applications, including water pumping, stand-alone systems for home and business, systems for community centers, schools, and health clinics, and examples in the industrial area. There is also a page of contacts, plus two specific example applications for a wind-diesel system for a remote station in Antarctica and one on wind-diesel village electrification in Russia.

anon.

2001-01-01T23:59:59.000Z

420

Heat-rate improvements obtained by retubing condensers with new, enhanced tube types  

SciTech Connect (OSTI)

Significant fuel savings can be achieved at power plants by retubing the condensers with enhanced tubes. Because of the higher overall heat-transfer coefficient, the exhaust steam is condensed at a lower pressure and the plant efficiency is therefore increased or plant heat rate is reduced. Only the spirally indented type of enhanced tube is currently being used in the U.S. and most other countries; however, different types of enhanced tubes have been proposed for power-plant condensers, each with their own set of attributes. This paper determines what attributes and their magnitudes of enhanced tubes lead to the most energy savings as measured by reduction of the plant heat rate. The particular attributes considered are the inside and outside enhancement levels, the inside efficiency index (inside enhancement level divided by pressure-drop increase), and the enhanced-tube fouling-rate multiplier. Two particular condensers were selected because all necessary information were known from previous heat-rate studies such as the condenser geometry, the circulating-water pump and system information, and the low-pressure turbine characteristics. These are {open_quotes}real-world{close_quotes} condensers and therefore the finding will be representative for many other condenser-retubing applications. However, the authors strongly recommend that an economic evaluation be performed at each site to determine the energy savings and payback time. This generic investigation showed that the outside enhancement level is the most important attribute, and a value of about 1.5 can lead to heat-rate savings of about 20 to 40 Btu/kW-hr. Increasing the inside enhancement is less effective because of the increased pressure drop that leads to a reduction of the coolant flow rate and velocity.

Rabas, T.J. [Argonne National Lab., IL (United States); Taborek, J. [Consulting Services, Virginia Beach, VA (United States)

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Compensated count-rate circuit for radiation survey meter  

DOE Patents [OSTI]

A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for counting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensated circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

Todd, Richard A. (Powell, TN)

1981-01-01T23:59:59.000Z

422

Compensated count-rate circuit for radiation survey meter  

DOE Patents [OSTI]

A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for couting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensation circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

Todd, R.A.

1980-05-12T23:59:59.000Z

423

Disproof of solar influence on the decay rates of 90Sr/90Y  

E-Print Network [OSTI]

A custom-built liquid scintillation counter was used for long-term measurements of 90Sr/90Y sources. The detector system is equipped with an automated sample changer and three photomultiplier tubes, which makes the application of the triple-to-double coincidence ratio (TDCR) method possible. After decay correction, the measured decay rates were found to be stable and no annual oscillation could be observed. Thus, the findings of this work are in strong contradiction to those of Parkhomov [1] who reported on annual oscillations when measuring 90Sr/90Y with a Geiger-M\\"uller counter. Sturrock et al. [2] carried out a more detailed analysis of the experimental data from Parkhomov and claimed to have found correlations between the decay rates and processes inside the Sun. These findings are questionable, since they are based on inappropriate experimental data as is demonstrated in this work. A frequency analysis of our activity data does not show any significant periodicity.

Karsten Kossert; Ole Nhle

2014-07-09T23:59:59.000Z

424

Stability and decay-rates for the five-dimensional Schwarzschild metric under biaxial perturbations  

E-Print Network [OSTI]

In this paper we prove the non-linear asymptotic stability of the five-dimensional Schwarzschild metric under biaxial vacuum perturbations. This is the statement that the evolution of (SU(2) x U(1))-symmetric vacuum perturbations of initial data for the five-dimensional Schwarzschild metric finally converges in a suitable sense to a member of the Schwarzschild family. It constitutes the first result proving the existence of non-stationary vacuum black holes arising from asymptotically flat initial data dynamically approaching a stationary solution. In fact, we show quantitative rates of approach. The proof relies on vectorfield multiplier estimates, which are used in conjunction with a bootstrap argument to establish polynomial decay rates for the radiation on the perturbed spacetime. Despite being applied here in a five-dimensional context, the techniques are quite robust and may admit applications to various four-dimensional stability problems.

G. Holzegel

2008-08-24T23:59:59.000Z

425

High etching rates of bulk Nb in Ar/Cl{sub 2} microwave discharge  

SciTech Connect (OSTI)

Plasma-based Nb surface treatment provides an excellent opportunity to eliminate surface imperfections and increase the cavity quality factor in important applications such as particle accelerators and cavity quantum electrodynamics, as well as Josephson junctions. In this study, plasma etching of bulk Nb is performed on the surface of disk-shaped samples with the goal of eliminating nonsuperconductive pollutants in the penetration depth region and the mechanically damaged surface layer. The authors have demonstrated that in the microwave glow discharge, an etching rate of 1.5 {mu}m/min can be achieved using Cl{sub 2} as a reactive gas. The influence of plasma parameters such as input power, pressure, and concentration of the reactive gas on the etching rate is determined. Simultaneously, plasma emission spectroscopy was used to estimate the densities of Cl, Cl{sup +}, and Cl{sub 2} under various plasma conditions.

Raskovic, M.; Popovic, S.; Upadhyay, J.; Vuskovic, L.; Phillips, L.; Valente-Feliciano, A.-M. [Department of Physics, Old Dominion University, Norfolk, Virginia 23529 (United States); Thomas Jefferson National Accelerator Facility, Newport News, Virginia 23606 (United States)

2009-03-15T23:59:59.000Z

426

Cavity-enhanced field-free molecular alignment at high repetition rate  

E-Print Network [OSTI]

Extreme ultraviolet frequency combs are a versatile tool with applications including precision measurement, strong-field physics, and solid-state physics. Here we report on an application of extreme ultraviolet frequency combs and their driving lasers to studying strong-field effects in molecular systems. We perform field-free molecular alignment and high-order hamonic generation with aligned molecules in a gas jet at 154 MHz repetition rate using a high-powered optical frequency comb inside a femtosecond enhancement cavity. The cavity-enhanced system provides means to reach suitable intensities to study field-free molecular alignment and enhance the observable effects of the molecule-field interaction. We observe modulations of the driving field, arising from the nature of impulsive stimulated Raman scattering responsible for coherent molecular rotations. We foresee impact of this work on the study of molecule-based strong-field physics, with improved precision and a more fundamental understanding of the int...

Benko, Craig; Allison, Thomas K; Labaye, Franois; Ye, Jun

2015-01-01T23:59:59.000Z

427

Ultrashort pulse high repetition rate laser system for biological tissue processing  

DOE Patents [OSTI]

A method and apparatus are disclosed for fast, efficient, precise and damage-free biological tissue removal using an ultrashort pulse duration laser system operating at high pulse repetition rates. The duration of each laser pulse is on the order of about 1 fs to less than 50 ps such that energy deposition is localized in a small depth and occurs before significant hydrodynamic motion and thermal conduction, leading to collateral damage, can take place. The depth of material removed per pulse is on the order of about 1 micrometer, and the minimal thermal and mechanical effects associated with this ablation method allows for high repetition rate operation, in the region 10 to over 1000 Hertz, which, in turn, achieves high material removal rates. The input laser energy per ablated volume of tissue is small, and the energy density required to ablate material decreases with decreasing pulse width. The ablation threshold and ablation rate are only weakly dependent on tissue type and condition, allowing for maximum flexibility of use in various biological tissue removal applications. The use of a chirped-pulse amplified Titanium-doped sapphire laser is disclosed as the source in one embodiment. 8 figs.

Neev, J.; Da Silva, L.B.; Matthews, D.L.; Glinsky, M.E.; Stuart, B.C.; Perry, M.D.; Feit, M.D.; Rubenchik, A.M.

1998-02-24T23:59:59.000Z

428

Ultrashort pulse high repetition rate laser system for biological tissue processing  

DOE Patents [OSTI]

A method and apparatus is disclosed for fast, efficient, precise and damage-free biological tissue removal using an ultrashort pulse duration laser system operating at high pulse repetition rates. The duration of each laser pulse is on the order of about 1 fs to less than 50 ps such that energy deposition is localized in a small depth and occurs before significant hydrodynamic motion and thermal conduction, leading to collateral damage, can take place. The depth of material removed per pulse is on the order of about 1 micrometer, and the minimal thermal and mechanical effects associated with this ablation method allows for high repetition rate operation, in the region 10 to over 1000 Hertz, which, in turn, achieves high material removal rates. The input laser energy per ablated volume of tissue is small, and the energy density required to ablate material decreases with decreasing pulse width. The ablation threshold and ablation rate are only weakly dependent on tissue type and condition, allowing for maximum flexibility of use in various biological tissue removal applications. The use of a chirped-pulse amplified Titanium-doped sapphire laser is disclosed as the source in one embodiment.

Neev, Joseph (Laguna Beach, CA); Da Silva, Luiz B. (Danville, CA); Matthews, Dennis L. (Moss Beach, CA); Glinsky, Michael E. (Livermore, CA); Stuart, Brent C. (Fremont, CA); Perry, Michael D. (Livermore, CA); Feit, Michael D. (Livermore, CA); Rubenchik, Alexander M. (Livermore, CA)

1998-01-01T23:59:59.000Z

429

WP-96/TR-96 & TC-96 Power and Transmission Rate Case (rates/ratecases)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudhaSurface.Laboratory30,WP-07 power rates On

430

Property:OpenEI/UtilityRate/DemandRateStructure/Tier3Adjustment | Open  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation Rate Jump to:Energy

431

Property:OpenEI/UtilityRate/DemandRateStructure/Tier3Max | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation Rate Jump

432

Property:OpenEI/UtilityRate/DemandRateStructure/Tier4Adjustment | Open  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation RateEnergy

433

Effects, determination, and correction of count rate nonlinearity in multi-channel analog electron detectors  

SciTech Connect (OSTI)

Detector counting rate nonlinearity, though a known problem, is commonly ignored in the analysis of angle resolved photoemission spectroscopy where modern multichannel electron detection schemes using analog intensity scales are used. We focus on a nearly ubiquitous inverse saturation nonlinearity that makes the spectra falsely sharp and beautiful. These artificially enhanced spectra limit accurate quantitative analysis of the data, leading to mistaken spectral weights, Fermi energies, and peak widths. We present a method to rapidly detect and correct for this nonlinearity. This algorithm could be applicable for a wide range of nonlinear systems, beyond photoemission spectroscopy.

Reber, T. J.; Plumb, N. C.; Waugh, J. A.; Dessau, D. S. [Department of Physics, University of Colorado, Boulder, Colorado 80309-0390 (United States)] [Department of Physics, University of Colorado, Boulder, Colorado 80309-0390 (United States)

2014-04-15T23:59:59.000Z

434

Building Profits and Goodwill in the Wood Product Industry with Time-Of-Use Rates  

E-Print Network [OSTI]

and maintains four separate points of delivery (POD) at the plywood plant as described below: POINT OF PEAK CUSTOMER DELIVERY EQUIPMENT --!L POD 11 945 sander & fluid flame (a wood boiler) POD #2 1885 four foot lathe, eight foot lathe & poly... incorporates the same type application of the TaU rate. With the exception of the four-foot lathe, all equipment served from POD #2 operated 24 hours per day 6 days per week. The four-foot lathe operated 7 a.m. - 3 p.m. The load associated with the lathe...

Boyd, W. K.

435

MSW Application Checklist IMPORTANT NOTES  

E-Print Network [OSTI]

MSW Application Checklist IMPORTANT NOTES 1. Please submit all Application Materials and Fees SUBMIT Application for Admission to Graduate Studies Statement of Academic Interests (1-2 pages) MSW

Northern British Columbia, University of

436

Heat Pumps - Theory and Applications  

E-Print Network [OSTI]

compressors (heat pumps) with actual applications in Monsanto. Guidelines for possible application areas are drawn from the analysis, and conclusions are drawn both about the usefulness of exergy analysis and about the heat pump application areas....

Altin, M.

1982-01-01T23:59:59.000Z

437

OPS Application Requisition #: Job Title  

E-Print Network [OSTI]

to my application and resume. I certify that the application and/or resume submitted are a complete statements or omissions made by me on this form, my application, my resume, or any supplementary

Mazzotti, Frank

438

Saving Energy and Improving IAQ through Application of Advanced Air Cleaning Technologies  

E-Print Network [OSTI]

Saving Energy and Improving IAQ through Application of Advanced Air Cleaning Technologies Table 1, we may be able use air cleaning systems and reduce rates of ventilation (i.e., reduce rates pollutant sources than homes. This article describes the types of air cleaning systems that will be needed

439

Impacts on groundwater due to land application of sewage sludge  

SciTech Connect (OSTI)

The project was designed to demonstrate the potential benefits of utilizing sewage sludge as a soil conditioner and fertilizer on Sassafras sandy loam soil. Aerobically digested, liquid sewage sludge was applied to the soil at rates of 0, 22.4, and 44.8 Mg of dry solids/ha for three consecutive years between 1978 and 1981. Groundwater, soil, and crop contamination levels were monitored to establish the maximum sewage solids loading rate that could be applied without causing environmental deterioration. The results indicate that application of 22.4 Mg of dry solids/ha of sludge is the upper limit to ensure protection of the groundwater quality on the site studied. Application rates at or slightly below 22.4 Mg of dry solids/ha are sufficient for providing plant nutrients for the dent corn and rye cropping system utilized in the study.

Higgins, A.J.

1984-06-01T23:59:59.000Z

440

Neutron sources and applications  

SciTech Connect (OSTI)

Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications.

Price, D.L. [ed.] [Argonne National Lab., IL (United States); Rush, J.J. [ed.] [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

web identity application sectioneleven  

E-Print Network [OSTI]

web identity application sectioneleven 99 contents elements of webpage design......................................................................... 100-101 web development and design considerations web banners is required for all official UCSF webpages. This banner includes a required link

Derisi, Joseph

442

Compact microwave ion source for industrial applications  

SciTech Connect (OSTI)

A 2.45 GHz microwave ion source for ion implanters has many good properties for industrial application, such as easy maintenance and long lifetime, and it should be compact for budget and space. But, it has a dc current supply for the solenoid and a rf generator for plasma generation. Usually, they are located on high voltage platform because they are electrically connected with beam extraction power supply. Using permanent magnet solenoid and multi-layer dc break, high voltage deck and high voltage isolation transformer can be eliminated, and the dose rate on targets can be controlled by pulse duty control with semiconductor high voltage switch. Because the beam optics does not change, beam transfer components, such as focusing elements and beam shutter, can be eliminated. It has shown the good performances in budget and space for industrial applications of ion beams.

Cho, Yong-Sub; Kim, Dae-Il; Kim, Han-Sung; Seol, Kyung-Tae; Kwon, Hyeok-Jung; Hong, In-Seok [Proton Engineering Frontier Project, Korea Atomic Energy Research Institute, Daejeon 305-353 (Korea, Republic of)

2012-02-15T23:59:59.000Z

443

Applications of cavity optomechanics  

SciTech Connect (OSTI)

Cavity-optomechanics aims to study the quantum properties of mechanical systems. A common strategy implemented in order to achieve this goal couples a high finesse photonic cavity to a high quality factor mechanical resonator. Then, using feedback forces such as radiation pressure, one can cool the mechanical mode of interest into the quantum ground state and create non-classical states of mechanical motion. On the path towards achieving these goals, many near-term applications of this field have emerged. After briefly introducing optomechanical systems and describing the current state-of-the-art experimental results, this article summarizes some of the more exciting practical applications such as ultra-sensitive, high bandwidth accelerometers and force sensors, low phase noise x-band integrated microwave oscillators and optical signal processing such as optical delay-lines, wavelength converters, and tunable optical filters. In this rapidly evolving field, new applications are emerging at a fast pace, but this article concentrates on the aforementioned lab-based applications as these are the most promising avenues for near-term real-world applications. New basic science applications are also becoming apparent such as the generation of squeezed light, testing gravitational theories and for providing a link between disparate quantum systems.

Metcalfe, Michael [Booz Allen Hamilton, 3811 Fairfax Drive, Arlington, Virginia 22203 (United States)

2014-09-15T23:59:59.000Z

444

Rate coefficient for the chemi-ionization in slow Li*(n)+Li and Na*(n)+Na collisions  

SciTech Connect (OSTI)

The chemi-ionization processes in slow-atom-Rydberg-atom collisions are considered in this paper. A version of the semiclassical method of rate coefficient calculation that is free of the presumptions which significantly limited its applicability previously is presented. The method is applied to the cases of Li*(n)+Li and Na*(n)+Na collisions for the principal quantum numbers 5{<=}n{<=}25 and temperatures 600{<=}T{<=}1200 K. The results of calculation of the rate coefficients of the corresponding chemi-ionization processes are compared to the existing experimental data from the literature.

Ignjatovic, Lj.M.; Mihajlov, A.A. [Institute of Physics, P. O. Box 68, 11080 Zemun, Belgrade (Serbia and Montenegro)

2005-08-15T23:59:59.000Z

445

Granular Salt Summary: Reconsolidation Principles and Applications  

SciTech Connect (OSTI)

The purposes of this paper are to review the vast amount of knowledge concerning crushed salt reconsolidation and its attendant hydraulic properties (i.e., its capability for fluid or gas transport) and to provide a sufficient basis to understand reconsolidation and healing rates under repository conditions. Topics covered include: deformation mechanisms and hydro-mechanical interactions during reconsolidation; the experimental data base pertaining to crushed salt reconsolidation; transport properties of consolidating granulated salt and provides quantitative substantiation of its evolution to characteristics emulating undisturbed rock salt; and extension of microscopic and laboratory observations and data to the applicable field scale.

Frank Hansen; Till Popp; Klaus Wieczorek; Dieter Sthrenberg

2014-07-01T23:59:59.000Z

446

Minimizing Variation in Outdoor CPV Power Ratings (Presentation)  

SciTech Connect (OSTI)

Presented at the 7th International Conference on Concentrating Photovoltaic Systems (CPV-7), 4-6 April 2011, Las Vegas, Nevada. The CPV community has agreed to have both indoor and outdoor power ratings at the module level. The indoor rating provides a repeatable measure of module performance as it leaves the factory line while the outdoor rating provides a measure of true performance under real world conditions. The challenge with an outdoor rating is that the spectrum, temperature, wind speed, etc are constantly in flux and therefore the resulting power rating varies from day to day and month to month. This work examines different methodologies for determining the outdoor power rating with the goal of minimizing variation even if data are collected under changing meteorological conditions.

Muller, M.

2011-04-01T23:59:59.000Z

447

Radiation dose rates from UF{sub 6} cylinders  

SciTech Connect (OSTI)

This paper describes the results of many studies, both theoretical and experimental, which have been carried out by Urenco over the last 15 years into radiation dose rates from uranium hexafluoride (UF{sub 6}) cylinders. The contents of the cylinder, its history, and the geometry all affect the radiation dose rate. These factors are all examined in detail. Actual and predicted dose rates are compared with levels permitted by IAEA transport regulations.

Friend, P.J. [Urenco, Capenhurst (United Kingdom)

1991-12-31T23:59:59.000Z

448

High temperature electrochemical corrosion rate probes for combustion environments  

SciTech Connect (OSTI)

Electrochemical corrosion rate probes have been constructed and tested along with mass loss coupons in an air plus water vapor and a N2/O2/CO2 plus water vapor environment. Temperatures ranged from 200? to 700?C. Results show that electrochemical corrosion rates for ash-covered mild steel are a function of time, temperature and process environment. Correlation between the electrochemical and mass loss corrosion rates was poor.

Covino, Bernard S., Jr.; Bullard, Sophie J.; Cramer, Stephen D.; Holcomb, Gordon R.; Ziomek-Moroz, Margaret; Eden, David A. (Intercorr International Inc.); Kane, Russell D. (Intercorr International Inc.); Eden, Dawn C. (Intercorr International Inc.)

2004-01-01T23:59:59.000Z

449

Charged-Particle Thermonuclear Reaction Rates: III. Nuclear Physics Input  

E-Print Network [OSTI]

The nuclear physics input used to compute the Monte Carlo reaction rates and probability density functions that are tabulated in the second paper of this series (Paper II) is presented. Specifically, we publish the input files to the Monte Carlo reaction rate code RatesMC, which is based on the formalism presented in the first paper of this series (Paper I). This data base contains overwhelmingly experimental nuclear physics information. The survey of literature for this review was concluded in November 2009.

Christian Iliadis; Richard Longland; Art Champagne; Alain Coc

2010-04-23T23:59:59.000Z

450

Home energy ratings systems: Actual usage may vary  

SciTech Connect (OSTI)

Home energy ratings (HERS) attempt to predict typical energy costs for a given residence and estimate the savings potentials of various energy retrofits. This article discusses where the ratings could be improved to more accurately predict the actual energy consumption. Topics covered include the following: is HERS on target (scores, energy predictions, recommended energy improvements); why HERS aren`t perfect; improvements in HERS; the possibility that home energy ratings systems will become market driven. 1 fig., 2 tabs.

Stein, J.R. [Lawrence Berkeley National Lab., CA (United States)

1997-09-01T23:59:59.000Z

451

Optimization Online - Convergence rate analysis of the forward ...  

E-Print Network [OSTI]

Oct 9, 2014 ... Convergence rate analysis of the forward-Douglas-Rachford splitting scheme. Damek Davis (Damek ***at*** math.ucla.edu). Abstract: Operator...

Damek Davis

2014-10-09T23:59:59.000Z

452

air change rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rydhof 2 Traffic-related air pollution exposures and changes in heart rate variability in Mexico City: A panel study MIT - DSpace Summary: Abstract Background While air pollution...

453

air change rates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rydhof 2 Traffic-related air pollution exposures and changes in heart rate variability in Mexico City: A panel study MIT - DSpace Summary: Abstract Background While air pollution...

454

ORISE: Report shows nuclear engineering graduation rates on the...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ORISE report shows nuclear engineering graduation rates on the rise in 2013 Number of graduate degrees expected to remain consistent, but undergraduate degrees could see decrease...

455

Updated fracture incidence rates for the US version of FRAX  

E-Print Network [OSTI]

presenting with non-vertebral fractures. Osteoporos Int 18:2006) Epidemiology of vertebral fractures: implications forORIGINAL ARTICLE Updated fracture incidence rates for the US

Ettinger, B.; Black, D. M.; Dawson-Hughes, B.; Pressman, A. R.; Melton, L. J.

2010-01-01T23:59:59.000Z

456

Regional Dialogue Guidebook: Background on Products, Rates, and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

on Products, Rates, and Resource Support Services available to BPA's Public Utilities Updated June 4, 2010 This page intentionally left blank. For Regional Dialogue...

457

acrosome reaction rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

fertilizing capacity29 . A Received 1 March; accepted 23 April Myhr, Karen 2 On thermonuclear reaction rates Astrophysics (arXiv) Summary: Nuclear reactions govern major...

458

Calculation of tunneling rates across a barrier with continuous potential  

E-Print Network [OSTI]

Here, approximate, but accurate expressions for calculation of wavefunctions and tunneling rates are obtained using the method of uniform asymptotic expansion.

Sina Khorasani

2011-04-10T23:59:59.000Z

459

Guidance on Utility Rate Estimations and Weather Normalization...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Weather Normalization in an ESPC Document explains how to use estimated energy rates and normalized weather data in determining an energy service company's (ESCO's)...

460

Gradient methods for convex minimization: better rates under ...  

E-Print Network [OSTI]

Mar 20, 2013 ... Gradient methods for convex minimization: better rates under weaker conditions. Hui Zhang(hhuuii.zhang ***at*** gmail.com)

Hui Zhang

2013-03-20T23:59:59.000Z

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Merger and Ring Galaxy Formation Rates at z<=2  

E-Print Network [OSTI]

We compare the observed merger rate of galaxies over cosmic time and the frequency of collisional ring galaxies (CRGs), with analytic models and halo merger and collision rates from a large cosmological simulation. In the Lambda cold dark matter (LCDM) model we find that the cosmic {\\it merger fraction} does not evolve strongly between 0.2rate since z~1 might not be tied to a disappearing population of major mergers. Halos hosting massive galaxies undergo on average ~2 mergers from z~2 up to present day, reflecting the late assembly time for the massive systems and the related downsizing problem. The cosmic {\\it merger rate} declines with redshift: at the present time it is a factor of 10 lower than at z~2, in reasonable agreement with the current available data. The rate of CRG formation derived from the interactions between halo progenitors up to z=2 is found to be a good tracer of the cosmic merger rate. In the LCDM model the rate of CRGs as well as the merger rate do not scale as (1+z)^m, as suggested by previous models. Our predictions of cosmic merger and CRG rates may be applied to forthcoming surveys such as GOODS and zCOSMOS.

E. D'Onghia; M. Mapelli; B. Moore

2008-06-20T23:59:59.000Z

462

Tomography increases key rates of quantum-key-distribution protocols  

E-Print Network [OSTI]

We construct a practically implementable classical processing for the BB84 protocol and the six-state protocol that fully utilizes the accurate channel estimation method, which is also known as the quantum tomography. Our proposed processing yields at least as high key rate as the standard processing by Shor and Preskill. We show two examples of quantum channels over which the key rate of our proposed processing is strictly higher than the standard processing. In the second example, the BB84 protocol with our proposed processing yields a positive key rate even though the so-called error rate is higher than the 25% limit.

Shun Watanabe; Ryutaroh Matsumoto; Tomohiko Uyematsu

2008-07-22T23:59:59.000Z

463

Rate controlling model for bioremediation of oil contaminated soil  

SciTech Connect (OSTI)

A mathematical model of bio-remediation of hydrocarbons in a soil matrix has been developed to predict the rate controlling step and the remediation rate during the bioremediation of a contaminated soil. The model is based on mass transfer of oxygen and oil into the aqueous solution in the soil matrix and the biodegradation of the hydrocarbons in the aqueous solution. Monod's equation was used to describe the biodegradation rate in aqueous solution while the mass transfer equations were used to describe the mass transfer rates of oxygen and oil in the soil matrix. Results from model calculations indicate that the bio-remediation rate increases and approaches a limiting value when one of the rates becomes controlling. When the parameters of the site soil samples are measured and the solubilities of oxygen and oil in aqueous solution are obtained, the bioremediation rate can be predicted by this model. The rate controlling step of the bioremediation site may be identified quickly and steps to improve the bioremediation rate can be recommended. 8 refs., 7 figs.

Li, K.Y.; Annamali, S.N.; Hopper, J.R. (Lamar Univ., Beaumont, TX (United States))

1993-11-01T23:59:59.000Z

464

Scaling of the magnetic reconnection rate with symmetric shear flow  

SciTech Connect (OSTI)

The scaling of the reconnection rate during (fast) Hall magnetic reconnection in the presence of an oppositely directed bulk shear flow parallel to the reconnecting magnetic field is studied using two-dimensional numerical simulations of Hall reconnection with two different codes. Previous studies noted that the reconnection rate falls with increasing flow speed and shuts off entirely for super-Alfvenic flow, but no quantitative expression for the reconnection rate in sub-Alfvenic shear flows is known. An expression for the scaling of the reconnection rate is presented.

Cassak, P. A. [Department of Physics, West Virginia University, Morgantown, West Virginia 26506 (United States); Otto, A. [Geophysical Institute, University of Alaska-Fairbanks, Fairbanks, Alaska 99775 (United States)

2011-07-15T23:59:59.000Z

465

Construction, Qualification, and Low Rate Production Start-up...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles Construction, Qualification, and Low Rate Production Start-up of a DC Bus Capacitor High Volume...

466

Certification and Rating of Attachments for Fenestration Technologies...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

rate fenestration attachment energy performance and provide accurate and useful product comparison criteria, allowing end users in residential and commercial markets to assess...

467

agitation rating scale: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

observations by combining two concepts: the impact of cell sizes on metabolic rate and fractal-like (hierarchical) organization. The proposed model both theoretically and...

468

activation analysis rates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

pressure signal. Although it is known rate analysis often replaces electrocardiogram (ECG) devices with the advantage that it does a device, worn at the wrist for a great...

469

John S. Wright Forestry Center Room Sizes, Capacities, and Rates  

E-Print Network [OSTI]

Appendix 1 John S. Wright Forestry Center Room Sizes, Capacities, and Rates Room College the Wright Center contact: Marlene Mann, Administrative Assistant Forestry and Natural Resources Voice: 765

470

Approximate Primal Solutions and Rate Analysis for Dual ...  

E-Print Network [OSTI]

Mar 28, 2007 ... grams with application to multicommodity network flows, ... [15] S. Low and D.E. Lapsley, Optimization flow control, I: Basic algorithm and con-.

2007-03-29T23:59:59.000Z

471

Colorado State University Mail Services DOMESTIC & INTERNATIONAL POSTAGE RATES January 26  

E-Print Network [OSTI]

Colorado State University Mail Services DOMESTIC & INTERNATIONAL POSTAGE RATES January 26 th Flat Rate Envelope $5.60 Legal Flat Rate Envelope $5.75 Padded Flat Rate Envelope $5.95 Small Flat Rate Box $5.80 Medium Flat Rate Box $12.35 Large Flat Rate Box $17.45 APO/FPO Large Flat Rate Box $15

472

E-Print Network 3.0 - accelerated evolutionary rate Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

rate Search Powered by Explorit Topic List Advanced Search Sample search results for: accelerated evolutionary rate...

473

E-Print Network 3.0 - accelerated evolutionary rates Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

rates Search Powered by Explorit Topic List Advanced Search Sample search results for: accelerated evolutionary rates...

474

Composite materials for fusion applications  

SciTech Connect (OSTI)

Ceramic matrix composites, CMCs, are being considered for advanced first-wall and blanket structural applications because of their high-temperature properties, low neutron activation, low density and low coefficient of expansion coupled with good thermal conductivity and corrosion behavior. This paper presents a review and analysis of the hermetic, thermal conductivity, corrosion, crack growth and radiation damage properties of CMCs. It was concluded that the leak rates of a gaseous coolant into the plasma chamber or tritium out of the blanket could exceed design criteria if matrix microcracking causes existing porosity to become interconnected. Thermal conductivities of unirradiated SiC/SiC and C/SiC materials are about 1/2 to 2/3 that of Type 316 SS whereas the thermal conductivity for C/C composites is seven times larger. The thermal stress figure-of-merit value for CMCs exceeds that of Type 316 SS for a single thermal cycle. SiC/SiC composites are very resistant to corrosion and are expected to be compatible with He or Li coolants if the O{sub 2} concentrations are maintained at the appropriate levels. CMCs exhibit subcritical crack growth at elevated temperatures and the crack velocity is a function of the corrosion conditions. The radiation stability of CMCs will depend on the stability of the fiber, microcracking of the matrix, and the effects of gaseous transmutation products on properties. 23 refs., 14 figs., 1 tab.

Jones, R.H.; Henager, C.H. Jr.; Hollenberg, G.W.

1991-10-01T23:59:59.000Z

475

Building Facebook Application using Python  

E-Print Network [OSTI]

Building Facebook Application using Python ECS-15, Fall 2010 Prantik Bhattacharyya #12; Farmville Game 57.5m users http://www.facebook.com/FarmVille Causes Issues/Movement 26.4m users http://www.facebook.com/causes Facebook Applications #12;Outline Facebook Applications Writing Applications Development

Wu, S. Felix

476

Charged-Particle Thermonuclear Reaction Rates: II. Tables and Graphs of Reaction Rates and Probability Density Functions  

E-Print Network [OSTI]

Numerical values of charged-particle thermonuclear reaction rates for nuclei in the A=14 to 40 region are tabulated. The results are obtained using a method, based on Monte Carlo techniques, that has been described in the preceding paper of this series (Paper I). We present a low rate, median rate and high rate which correspond to the 0.16, 0.50 and 0.84 quantiles, respectively, of the cumulative reaction rate distribution. The meaning of these quantities is in general different from the commonly reported, but statistically meaningless expressions, "lower limit", "nominal value" and "upper limit" of the total reaction rate. In addition, we approximate the Monte Carlo probability density function of the total reaction rate by a lognormal distribution and tabulate the lognormal parameters {\\mu} and {\\sigma} at each temperature. We also provide a quantitative measure (Anderson-Darling test statistic) for the reliability of the lognormal approximation. The user can implement the approximate lognormal reaction rate probability density functions directly in a stellar model code for studies of stellar energy generation and nucleosynthesis. For each reaction, the Monte Carlo reaction rate probability density functions, together with their lognormal approximations, are displayed graphically for selected temperatures in order to provide a visual impression. Our new reaction rates are appropriate for bare nuclei in the laboratory. The nuclear physics input used to derive our reaction rates is presented in the subsequent paper of this series (Paper III). In the fourth paper of this series (Paper IV) we compare our new reaction rates to previous results.

Christian Iliadis; Richard Longland; Art Champagne; Alain Coc; Ryan Fitzgerald

2010-04-23T23:59:59.000Z

477

Heart-Rate Pacing Simulation and Control via Multiagent Systems  

E-Print Network [OSTI]

Heart-Rate Pacing Simulation and Control via Multiagent Systems Alessandro Beda 1 and Nicola Gatti system of heart rate, but the results are so poor that the use of such models in commercial pacemakers evaluation. In litera- ture several techniques are adopted to combine models; for instance, in heart

Gatti, Nicola

478

PROCEEDINGS OF THE PELAGIC LONGLINE CATCH RATE STANDARDIZATION MEETING  

E-Print Network [OSTI]

PROCEEDINGS OF THE PELAGIC LONGLINE CATCH RATE STANDARDIZATION MEETING February 12-16, 2007 Imin;#12;Pelagic longline catch rate standardization meeting, Feb 2007 Table of Contents Introduction........................................................................................................... 6 1. Overview of longline effort standardizations in current Pacific HMS assessments... 6 2. Models

Hawai'i at Manoa, University of

479

Oil production models with normal rate curves Dudley Stark  

E-Print Network [OSTI]

Oil production models with normal rate curves Dudley Stark School of Mathematical Sciences Queen;Abstract The normal curve has been used to fit the rate of both world and U.S.A. oil production. In this paper we give the first theoretical basis for these curve fittings. It is well known that oil field

Stark, Dudley

480

Upscaling geochemical reaction rates using pore-scale network modeling  

E-Print Network [OSTI]

. To examine the scaling behavior of reaction kinetics, these continuum-scale rates from the network model as a valuable research tool for examining upscaling of geochemical kinetics. The pore-scale model allowsUpscaling geochemical reaction rates using pore-scale network modeling Li Li, Catherine A. Peters

Peters, Catherine A.

Note: This page contains sample records for the topic "applicable riders rate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Extinction rates under nonrandom patterns of habitat loss  

E-Print Network [OSTI]

conversion on species extinctions assume that habitat conversion occurs at ran- dom. This assumption allows predictions about extinction rates based on the speciesarea relationship. We show that the spatially compositional gradients, or species richness, also alter pre- dicted species extinction rates. We illustrate

482

November 2005 Deforestation and the Real Exchange Rate  

E-Print Network [OSTI]

November 2005 Deforestation and the Real Exchange Rate Abstract Deforestation is a phenomenon of deforestation that focuses on the factors a¤ecting the incen- tives to transform forested land into agricultural land. We show that: (i) lower discount rates and stronger institutions decrease deforestation; (ii

Paris-Sud XI, Université de

483

Demonstration of Reduced Airport Congestion through Pushback Rate Control  

E-Print Network [OSTI]

of a congestion control strategy at Boston Logan International Airport. The approach determines a suggested rate Control Demonstration at Boston Logan International Airport (BOS) was to show that a significant portionDemonstration of Reduced Airport Congestion through Pushback Rate Control Ioannis Simaiakis

Gummadi, Ramakrishna

484

Service Differentiation in Multi-Rate HSDPA Systems  

E-Print Network [OSTI]

--In multi-rate cellular transmission systems, users with different Quality of Service (QoS) requirements for the uplink (HSUPA). These wireless transmission technologies promise enhanced data rates for mobile Internet layer transmission [18]. CDMA is a clever modulation scheme that allows multiple users to transmit

Williamson, Carey

485

Adult Football Helmet Detailed Ratings Riddell Revolution Speed  

E-Print Network [OSTI]

Adult Football Helmet Detailed Ratings May 2011 Riddell Revolution Speed Helmet ID SPEED1 SPEED2: A total of 10 adult football helmet models were evaluated using the STAR evaluation system for May 2011.397 0.350 0.322 Overall STAR 0.356 Very Good: Adult Football Helmet Detailed Ratings May 2011 #12

Lu, Chang

486

RATE DISTORTION OPTIMIZED DOCUMENT CODING USING RESOLUTION ENHANCED RENDERING  

E-Print Network [OSTI]

RATE DISTORTION OPTIMIZED DOCUMENT CODING USING RESOLUTION ENHANCED RENDERING Guotong Feng , Hui at a fixed bit rate. This method, which we call resolution enhanced rendering (RER), works by adaptively enhanced rendering (RER) for jointly optimizing the THIS WORK IS SUPPORTED BY THE XEROX FOUNDATION. MRC

487

Wall recession rates in cavity-growth modeling  

SciTech Connect (OSTI)

The predictions of resource utilization obtained from cavity-growth models depend on the methods used to represent the recession rates of the walls of the cavity. Under many circumstances the cavity is largely filled with a bed char rubble. Examination of the mechanisms for recession at walls adjacent to these char beds indicates that the recession rates are controlled by convective heat transfer from the bed to the walls coupled with the thermomechanical breakdown of the walls. A recession-rate representation has been developed, based on this concept, for use in cavity-growth simulation programs. This representation characterizes wall breakdown by either a failure temperature or by a thickness of char layer at failure, and determines rates from a model of heat transfer under these conditions. It gives recession rates that are functions of gas temperature and mass flow rate in the cavity, and depend on effective particle size in the char bed. Wall recession rates calculated for WIDCO, Hoe Creek, and Hanna coals are in the range of 0.1 to 0.8 m/day at a 1300 K cavity temperature, and are consistent with the general rates observed for field tests. 27 references, 10 figures, 1 table.

Grens, E.A. II; Thorsness, C.B.

1984-08-01T23:59:59.000Z

488

Cosmic Supernova Rate History and Type Ia Supernova Progenitors  

E-Print Network [OSTI]

Adopting a single degenerate scenario for Type Ia supernova progenitors with the metallicity effect, we make a prediction of the cosmic supernova rate history as a composite of the supernova rates in spiral and elliptical galaxies, and compare with the recent observational data up to z ~ 0.55.

Chiaki Kobayashi; Ken'ichi Nomoto; Takuji Tsujimoto

2001-02-14T23:59:59.000Z

489

MINNESOTA ROAD FEE TEST MILEAGE BASED USER FEE RATE  

E-Print Network [OSTI]

Policy Center Oregon Road User Fee Pilot Program Other Interest: Nevada, Texas, Ohio, Idaho, etc. May Cellular Tower Data Warehouse May 24, 2012 6 #12;Determination of Mileage Fees · MBUF Rate StructureMINNESOTA ROAD FEE TEST MILEAGE BASED USER FEE RATE STRUCTURE CONCEPT 23rd Annual Transportation

Minnesota, University of

490

Energy levels, radiative rates and electron impact excitation rates for transitions in C III  

E-Print Network [OSTI]

We report energy levels, radiative rates (A-values) and lifetimes for the astrophysically-important Be-like ion C III. For the calculations, 166 levels belonging to the $n \\le$ 5 configurations are considered and the {\\sc grasp} (General-purpose Relativistic Atomic Structure Package) is adopted. Einstein A-coefficients are provided for all E1, E2, M1 and M2 transitions, while lifetimes are compared with available measurements as well as theoretical results, and no large discrepancies noted. Our energy levels are assessed to be accurate to better than 1\\% for a majority of levels, and A-values to better than 20\\% for most transitions. Collision strengths are also calculated, for which the Dirac Atomic R-matrix Code ({\\sc darc}) is used. A wide energy range, up to 21 Ryd, is considered and resonances resolved in a fine energy mesh in the thresholds region. The collision strengths are subsequently averaged over a Maxwellian velocity distribution to determine effective collision strengths up to a temperature of 8...

Aggarwal, K M

2015-01-01T23:59:59.000Z

491

A high sensitivity fiber optic macro-bend based gas flow rate transducer for low flow rates: Theory, working principle, and static calibration  

SciTech Connect (OSTI)

A novel fiber optic macro-bend based gas flowmeter for low flow rates is presented. Theoretical analysis of the sensor working principle, design, and static calibration were performed. The measuring system consists of: an optical fiber, a light emitting diode (LED), a Quadrant position sensitive Detector (QD), and an analog electronic circuit for signal processing. The fiber tip undergoes a deflection in the flow, acting like a cantilever. The consequent displacement of light spot center is monitored by the QD generating four unbalanced photocurrents which are function of fiber tip position. The analog electronic circuit processes the photocurrents providing voltage signal proportional to light spot position. A circular target was placed on the fiber in order to increase the sensing surface. Sensor, tested in the measurement range up to 10 l min{sup -1}, shows a discrimination threshold of 2 l min{sup -1}, extremely low fluid dynamic resistance (0.17 Pa min l{sup -1}), and high sensitivity, also at low flow rates (i.e., 33 mV min l{sup -1} up to 4 l min{sup -1} and 98 mV min l{sup -1} from 4 l min{sup -1} up to 10 l min{sup -1}). Experimental results agree with the theoretical predictions. The high sensitivity, along with the reduced dimension and negligible pressure drop, makes the proposed transducer suitable for medical applications in neonatal ventilation.

Schena, Emiliano; Saccomandi, Paola; Silvestri, Sergio [Center for Integrated Research, Unit of Measurements and Biomedical Instrumentation, Universita Campus Bio-Medico di Roma, Via Alvaro del Portillo, 21, 00128 Rome (Italy)

2013-02-15T23:59:59.000Z

492

Geochemical Rate/RNA Integration Study (GRIST): A Pilot Field Experiment for Inter-Calibration of Biogeochemistry and Nucleic Acid Measurements Final Report  

SciTech Connect (OSTI)

The Geochemical Rate/RNA Integration Study (GRIST) project sought to correlate biogeochemical flux rates with measurements of gene expression and mRNA abundance to demonstrate the application of molecular approaches to estimate the presence and magnitude of a suite of biogeochemical processes. The study was headed by Lee Kerkhoff of Rutgers University. In this component of the GRIST study, we characterized ambient nutrient concentrations and measured uptake rates for dissolved inorganic nitrogen (DIN, ammonium, nitrate and nitrite) and dissolved organic nitrogen (urea and dissolved free amino acids) during two diel studies at the Long-Term Ecosystem Observatory (LEO-15) on the New Jersey continental shelf.

Bronk, Deborah

2007-01-08T23:59:59.000Z

493

Finite-rate chemistry and transient effects in direct numerical simulations of turbulent nonpremixed flames  

SciTech Connect (OSTI)

Three-dimensional direct numerical simulations (DNS) of turbulent nonpremixed flames including finite-rate chemistry and heat release effects were performed. Two chemical reaction models were considered: (1) a single-step global reaction model in which the heat release and activation energy parameters are typical combustion applications, and (2) a two-step reaction model to stimulate radical production and consumption and to compare against the single-step model. The model problem consists of the interaction between an initially unstained laminar diffusion flame and a three-dimensional field of homogeneous turbulence. Conditions ranging from fast chemistry to the pure mixing limit were studied by varying a global Damkoehler number. Results suggest that turbulence-induced mixing acting along the stoichiometric line leads to a strong modification of the inner structure of the turbulent flame compared with a laminar strained flame, resulting in intermediate species concentrations well above the laminar prediction. This result is consistent the experimental observations. Comparison of the response of the turbulent flame structure due to changes in the scalar dissipation rate with a steady strained laminar flame reveals that unsteady strain rates experienced by the turbulent flame may be responsible for h3e observed high concentrations of reaction intermediates.

Mahalingam, S. [Univ. of Colorado, Boulder, CO (United States). Center for Combustion Research] [Univ. of Colorado, Boulder, CO (United States). Center for Combustion Research; Chen, J.H. [Sandia National Labs., Livermore, CA (United States). Combustion Research Facility] [Sandia National Labs., Livermore, CA (United States). Combustion Research Facility; Vervisch, L. [CORIA, Rouen (France). Laboratoire de Mechanique des Fluides Numeriques] [CORIA, Rouen (France). Laboratoire de Mechanique des Fluides Numeriques

1995-08-01T23:59:59.000Z

494

New developments in plasma-activated high-rate EB evaporation for metal strip  

SciTech Connect (OSTI)

The coating of metal strips by EB evaporation is well known since many years. But up to now the application on an industrial scale is very limited. One of the reasons are the costs and the progress of ECD technologies in the last ten years. But there are opportunities for the evaporation technology if layers with new properties can be produced. One way to meet this target is the application of a plasma-activated and ion-assisted process. However, the plasma density and the ion current density on the substrate must fit the high deposition rates. Many efforts in our institute are dedicated to the development of appropriate plasma sources. The systems are explained and main parameters are given. Using a plasma the layer properties can be improved remarkably. Therefore new applications come into play. First results are shown. Layers consisting of compounds will play a growing role for corrosion and abrasion protection. The technologies are explained and important film properties are presented.

Schiller, S.; Goedicke, K.; Hoetzsch, G. [Fraunhofer Institute, Dresden (Germany)

1994-12-31T23:59:59.000Z

495

STUDENT TRAVEL POLICY APPLICABILITY  

E-Print Network [OSTI]

STUDENT TRAVEL POLICY APPLICABILITY The student travel policy is subject to the standardized the following funding sources: Activity and Services (A & S) fees, Revenues, and Auxiliary fund. The student travel policy incorporates by reference in the University Regulation 4.006 Student Government and Student

Fernandez, Eduardo

496

Undergraduate Application and Scholarships  

E-Print Network [OSTI]

with Professor Nils Kroger, studying new materials made by microalgae for use in nano- technological applications such as biotechnology, renewable energy, nanotechnology, modern pharmaceuticals, environmental concerns, and forensics, which play central roles in the nation's health, nutrition, security, energy generation, and economy

Sherrill, David

497

DATABASE SECURITY APPLICATIONS  

E-Print Network [OSTI]

DATABASE SECURITY #12;APPLICATIONS #12;Polyinstantiation for Cover Stories Ravi S. Sandhu and Sushil Jajodia* Center for Secure Information Systems & Department of Information and Software Systems Engineering George Mason University Falffax, VA 22030, USA emaih {sandhu, jajodia}Qsitevax.gmu.edu Abstract

Sandhu, Ravi

498

Introducing Web Application Development  

E-Print Network [OSTI]

Introducing Web Application Development Instructor: Dr Wei Ding Development Instructor: Dr.Wei Ding Fall 2009 1CS 437/637 Database-BackedWeb Sites andWeb Services Introduction: Internet vs. World Wide Web Internet is an interconnected network of thousands ofInternet is an interconnected network

Ding, Wei

499

Permit application modifications  

SciTech Connect (OSTI)

This document contains the Permit Application Modifications for the Y-12 Industrial Landfill V site on the Oak Ridge Reservation. These modifications include the assessment of stability of the proposed Landfill V under static and loading conditions. Analyses performed include the general slope stability, veneer stability of the bottom liner and cover system, and a liquefaction potential assessment of the foundation soils.

NONE

1995-11-01T23:59:59.000Z

500

APPLICATION PRESIDENTIAL INTERNSHIP  

E-Print Network [OSTI]

APPLICATION PRESIDENTIAL INTERNSHIP IN HIGHER EDUCATION 2012-2013 The Presidential Internship perspective. The Presidential Internship in Higher Education program is looking for a small, diverse group and community leaders. To qualify for this internship, a student must: 1. Exhibit an interest in higher

Tipple, Brett